Calculation and Improvement on External Quantum Efficiency of OLEDs
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
The calculation of the external quantum efficiency(ηext) of organic light-emitting devices(OLEDs) is presented theoretically. The basic idea is to obtain ηext by calculating the fraction of the generated light that can escape through the top surface and the average transmittance over the escape cone. During the calculation, the effects of the interference, absorption and multiple reflections are neglected. Then a result of a typical 8-tris-hydroxyquinoline aluminum(Alq3)-based OLEDs on a planar glass substrate is obtained. And a twice increase in ηext can be achieved by using a high-index-glass substrate with an antireflection coating(SiO2) on substrate surface.
Institute of Scientific and Technical Information of China (English)
ZHANG Jian-hua; OU YANG Jun; LI Xue-yong; LI Hong-jian
2007-01-01
An analytical model is presented to calculate the disassociation probability and the external quantum efficiency at high field in doped organic electrophosphorescence(EPH) devices. The charge recombination process and the triplet(T)-triplet(T) annihilation processes are taken into account in this model. The influences of applied voltage and the thickness of the device on the disassociation probability, and of current density and the thickness of the device on the external quantum efficiency are studied thoroughly by including and ignoring the disassociation of excitons. It is found that the dissociation probability of excitons will come close to 1 at high electric field, and the external EPH quantum efficiency is almost the same at low electric field. There is a large discrepancy of the external EPH quantum efficiency at high electric field for including or ignoring the disassociation of excitons.
Davis, Nathaniel J. L. K.; Böhm, Marcus L.; Tabachnyk, Maxim; Wisnivesky-Rocca-Rivarola, Florencia; Jellicoe, Tom C.; Ducati, Caterina; Ehrler, Bruno; Greenham, Neil C.
2015-01-01
Multiple-exciton generation—a process in which multiple charge-carrier pairs are generated from a single optical excitation—is a promising way to improve the photocurrent in photovoltaic devices and offers the potential to break the Shockley–Queisser limit. One-dimensional nanostructures, for example nanorods, have been shown spectroscopically to display increased multiple exciton generation efficiencies compared with their zero-dimensional analogues. Here we present solar cells fabricated from PbSe nanorods of three different bandgaps. All three devices showed external quantum efficiencies exceeding 100% and we report a maximum external quantum efficiency of 122% for cells consisting of the smallest bandgap nanorods. We estimate internal quantum efficiencies to exceed 150% at relatively low energies compared with other multiple exciton generation systems, and this demonstrates the potential for substantial improvements in device performance due to multiple exciton generation. PMID:26411283
Davis, Nathaniel J L K; Böhm, Marcus L; Tabachnyk, Maxim; Wisnivesky-Rocca-Rivarola, Florencia; Jellicoe, Tom C; Ducati, Caterina; Ehrler, Bruno; Greenham, Neil C
2015-09-28
Multiple-exciton generation-a process in which multiple charge-carrier pairs are generated from a single optical excitation-is a promising way to improve the photocurrent in photovoltaic devices and offers the potential to break the Shockley-Queisser limit. One-dimensional nanostructures, for example nanorods, have been shown spectroscopically to display increased multiple exciton generation efficiencies compared with their zero-dimensional analogues. Here we present solar cells fabricated from PbSe nanorods of three different bandgaps. All three devices showed external quantum efficiencies exceeding 100% and we report a maximum external quantum efficiency of 122% for cells consisting of the smallest bandgap nanorods. We estimate internal quantum efficiencies to exceed 150% at relatively low energies compared with other multiple exciton generation systems, and this demonstrates the potential for substantial improvements in device performance due to multiple exciton generation.
Ahmed, H.; S. J. McCormack; Doran, J.
2016-01-01
Core-shell quantum dots CdSe/ZnS and lumogen yellow organic dye are characterized by their inclusion in luminescent downshifting (LDS) layers. Layers were deposited on top of crystalline silicon cell (c-Si), dye synthesized solar cell (DSSC), and cadmium telluride (CdTe) minimodules. External quantum efficiency measurements for the solar cell/LDS devices are discussed. Experimental results were compared with an optical model developed by Rothemund, 2014.
Directory of Open Access Journals (Sweden)
H. Ahmed
2016-01-01
Full Text Available Core-shell quantum dots CdSe/ZnS and lumogen yellow organic dye are characterized by their inclusion in luminescent downshifting (LDS layers. Layers were deposited on top of crystalline silicon cell (c-Si, dye synthesized solar cell (DSSC, and cadmium telluride (CdTe minimodules. External quantum efficiency measurements for the solar cell/LDS devices are discussed. Experimental results were compared with an optical model developed by Rothemund, 2014.
Liu, Xilan; Wang, Hangxing; Yang, Tingbin; Zhang, Wei; Gong, Xiong
2012-07-25
Operating at room temperature, polymer photodetectors (PDs) with external quantum efficiency approximately 80%, detectivity over 10(13) Jones, linear dynamic range over 120 dB, and dark current a few decades of nA/cm(2) were demonstrated. All these performance parameters were achieved by combined treatment of active layer with solvent vapor annealing and of polymer PDs with postproduction thermal annealing. These high performance parameters demonstrated that polymer PDs is comparable to or better than inorganic counterparts.
Energy Technology Data Exchange (ETDEWEB)
Seifert, Holger; Schueppel, Rico; Riede, Moritz K.; Leo, Karl [Institut fuer Angewandte Photophysik, Technische Universitaet Dresden (Germany); Brier, Eduard; Reinold, Egon; Baeuerle, Peter [Institut fuer Organische Chemie II und Neue Materialien, Universitaet Ulm (Germany)
2008-07-01
We investigate organic p-i-n solar cells with an oligothiophene derivative as donor and Fullerene C{sub 60} as acceptor materials. This donor-acceptor heterojunction leads to solar cells with an open circuit voltage as high as 1.0 V and a reasonable power conversion efficiency of up to 3.4%. Measuring current-voltage characteristics under monochromatic illumination of low intensity (non-standard reporting conditions), we find a wavelength dependent fill factor of these photovoltaic devices. Furthermore, we determine the external quantum efficiency (EQE) from the photoresponse of these devices using a modulated monochromatic illumination on top of a white light bias as well as an external voltage bias. The EQE spectrum can be attributed to the spectrally different absorption of donor and acceptor. We discuss the dependence of the EQE spectrum from the applied external voltage with respect to the charge generation mechanism.
Suzuki, Katsuaki; Kubo, Shosei; Shizu, Katsuyuki; Fukushima, Tatsuya; Wakamiya, Atsushi; Murata, Yasujiro; Adachi, Chihaya; Kaji, Hironori
2015-12-01
Triarylboron compounds have attracted much attention, and found wide use as functional materials because of their electron-accepting properties arising from the vacant p orbitals on the boron atoms. In this study, we design and synthesize new donor-acceptor triarylboron emitters that show thermally activated delayed fluorescence. These emitters display sky-blue to green emission and high photoluminescence quantum yields of 87-100 % in host matrices. Organic light-emitting diodes using these emitting molecules as dopants exhibit high external quantum efficiencies of 14.0-22.8 %, which originate from efficient up-conversion from triplet to singlet states and subsequent efficient radiative decay from singlet to ground states.
Hamadou, A.; Thobel, J.-L.; Lamari, S.
2016-10-01
A four level rate equations model for a terahertz optically pumped electrically driven quantum cascade laser is here introduced and used to model the system both analytically and numerically. In the steady state, both in the presence and absence of the terahertz optical field, we solve the resulting nonlinear system of equations and obtain closed form expressions for the levels occupation, population inversion as well as the mid-infrared pump threshold intensity in terms of the device parameters. We also derive, for the first time for this system, an analytical formula for the optical external efficiency and analyze the simultaneous effects of the cavity length and pump intensity on it. At moderate to high pump intensities, we find that the optical external efficiency scales roughly as the reciprocal of the cavity length.
Limpens, R.; Gregorkiewicz, T.
2013-01-01
The percentage of dark silicon nanocrystals, i.e., the nanocrystals that are not able to radiatively recombine after absorption of a photon, is investigated by combining measurements of external and internal quantum efficiencies. The study is conducted on samples prepared by co-sputtering and subseq
Lin, Ting-An; Chatterjee, Tanmay; Tsai, Wei-Lung; Lee, Wei-Kai; Wu, Meng-Jung; Jiao, Min; Pan, Kuan-Chung; Yi, Chih-Lung; Chung, Chin-Lung; Wong, Ken-Tsung; Wu, Chung-Chih
2016-08-01
Extremely efficient sky-blue organic electroluminescence with external quantum efficiency of ≈37% is achieved in a conventional planar device structure, using a highly efficient thermally activated delayed fluorescence emitter based on the spiroacridine-triazine hybrid and simultaneously possessing nearly unitary (100%) photoluminescence quantum yield, excellent thermal stability, and strongly horizontally oriented emitting dipoles (with a horizontal dipole ratio of 83%).
Energy Technology Data Exchange (ETDEWEB)
Barrigón, Enrique, E-mail: enrique.barrigon@ies-def.upm.es; Espinet-González, Pilar; Contreras, Yedileth; Rey-Stolle, Ignacio [Instituto de Energía Solar, Universidad Politécnica de Madrid ETSI de Telecomunicación, Avd. Complutense 30, 28040 Madrid (Spain)
2015-09-28
The measurement of the external quantum efficiency (EQE) of low bandgap subcells in a multijunction solar cell can be sometimes problematic. In particular, this paper describes a set of cases where the EQE of a Ge subcell in a conventional GaInP/GaInAs/Ge triple-junction solar cell cannot be fully measured. We describe the way to identify each case by tracing the I-V curve under the same light-bias conditions applied for the EQE measurement, together with the strategies that could be implemented to attain the best possible measurement of the EQE of the Ge subcell.
Wu, Jyh Ming; Chang, Wei En
2014-08-27
We demonstrated a single microwire photodetector first made using a VO2 microwire that exhibted high responsivity (Rλ) and external quantum efficiency (EQE) under varying light intensities. The VO2 nanowires/microwires were grown and attached on the surface of the SiO2/Si(100) substrate. The SiO2 layer can produce extremely low densities of long VO2 microwires. An individual VO2 microwire was bonded onto the ends using silver paste to fabricate a photodetector. The high-resolution transmission electron microscopy image indicates that the nanowires grew along the [100] axis as a single crystal. The critical parameters, such as Rλ, EQE, and detectivity, are extremely high, 7069 A W(-1), 2.4 × 10(10)%, and 1.5 × 10(14) Jones, respectively, under a bias of 4 V and an illumination intensity of 1 μW cm(-2). The asymmetry in the I-V curves results from the unequal barrier heights at the two contacts. The photodetector has a linear I-V curve with a low dark current while a nonlinear curves was observed under varing light intensities. The highly efficient hole-trapping effect contributed to the high responsivity and external quantum efficiency in the metal-oxide nanomaterial photodetector. The responsivity of VO2 photodetector is 6 and 4 orders higher than that of graphene (or MoS2) and GaS, respectively. The findings demonstrate that VO2 nanowire/microwire is highly suitable for realizing a high-performance photodetector on a SiO2/Si substrate.
Zhang, Jing; Ding, Dongxue; Wei, Ying; Han, Fuquan; Xu, Hui; Huang, Wei
2016-01-20
Highly efficient low-voltage-driven -true-blue thermally activated -delayed fluorescence diodes are realized through employing a tri-phosphine oxide host (2,2',4-tris(di(phenyl) -phosphoryl)-diphenylether (DPETPO)) with a record external quantum efficiency of 23.0% and the lowest onset voltage of 2.8 V to date.
External quantum efficiency of Pt/n-GaN Schottky diodes in the spectral range 5-500nm
Energy Technology Data Exchange (ETDEWEB)
Aslam, Shahid [Raytheon ITSS, 4400 Forbes Boulevard, Lanham, MD 20706 (United States) and Goddard Space Flight Center, NASA, Bld. 11, Rm E015, Greenbelt, MD 20771 (United States)]. E-mail: saslam@pop200.gsfc.nasa.gov; Vest, Robert E. [National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 (United States); Franz, David [Raytheon ITSS, 4400 Forbes Boulevard, Lanham, MD 20706 (United States); Goddard Space Flight Center, NASA, Bld. 11, Rm E015, Greenbelt, MD 20771 (United States); Yan Feng [Raytheon ITSS, 4400 Forbes Boulevard, Lanham, MD 20706 (United States); Goddard Space Flight Center, NASA, Bld. 11, Rm E015, Greenbelt, MD 20771 (United States); Zhao Yuegang [Keithley Instruments, Inc., 30500 Bainbridge Rd., Cleveland, OH 44139-2216 (United States); Mott, Brent [Goddard Space Flight Center, NASA, Bld. 11, Rm E015, Greenbelt, MD 20771 (United States)
2005-02-21
The external quantum efficiency in the spectral wavelength range 5-500nm of a large active area Pt/n-type GaN Schottky photodiode that exhibits low reverse bias leakage current, is reported. The Schottky photodiodes were fabricated from n{sup -}/n{sup +} epitaxial layers grown by low pressure metalorganic vapour phase epitaxy on single crystal c-plane sapphire. The current-voltage (I-V) characteristics of several 0.25cm{sup 2} devices are presented together with the capacitance-voltage (C-V) characteristics of one of these devices. A leakage current as low as 14 pA at 0.5V reverse bias is reported, for a 0.25cm{sup 2} diode. The ultraviolet quantum efficiency measurements show that the diodes can be used as radiation hard detectors for the 5-365nm spectral range without the use of visible blocking filters. A peak responsivity of 77.5mA/W at 320nm is reported for one of the fabricated devices, corresponding to a spectral detectivity, D*=1.5x10{sup 14}cmHz{sup 1/2}W{sup -1}. The average detectivity between 250 and 350nm, for the same device, is reported to be D-bar*=1.3x10{sup 14}cmHz{sup 1/2}W{sup -1}. The spatial responsivity uniformity variation was established, using H{sub 2} Lyman-{alpha} radiation, to be +/-3% across the surface of a typical 0.25cm{sup 2} diode.
Inoue, Hideko; Yamada, Yui; Ohsawa, Nobuharu; Seo, Satoshi; Hosoumi, Shunsuke; Watabe, Takeyoshi; Mitsumori, Satomi; Kido, Hiromitsu
2016-09-01
We report a newly developed deep-blue phosphorescent iridium complex exhibiting a narrow emission spectrum. The use of this complex resulted in a deep-blue organic light-emitting diode (OLED) with an external quantum efficiency (EQE) exceeding 30%. Two iridium complexes with a 4H-1,2,4-triazole ligand which has an adamantyl group at the 4-position were synthesized, with the resulting effects of the adamantyl group on photoluminescence (PL) behavior investigated. [Ir(Adm1)3] having a 1-adamantyl group did not exhibit any emissions at room temperature, whereas [Ir(Adm2)3] having a 2-adamantyl group exhibited a blue emission with a peak wavelength of 459 nm and a high PL quantum yield of 0.94. Structural transformations between the ground state and excited state were estimated by molecular orbital calculations, which suggests that [Ir(Adm1)3] undergoes a considerably more extensive change than [Ir(Adm2)3]. It is therefore probable that [Ir(Adm1)3] ultimately experiences thermal deactivation owing to structural relaxation. Furthermore, an OLED was fabricated using [Ir(Adm2)3] as a dopant. The associated electroluminescence spectrum had an emission peak at 457 nm and a relatively small shoulder peak at 485 nm, which are consistent with the PL spectrum. A narrowed emission spectrum with a full width at half maximum of 58 nm was obtained, leading to a deep-blue emission with high color purity (CIE, x = 0.15, y = 0.22). This device ultimately exhibited an extremely high EQE of 32% at 2 mA/cm2, which was likely attributable to an increase in outcoupling efficiency via molecular orientation.
Energy Technology Data Exchange (ETDEWEB)
Nakane, Akihiro; Tamakoshi, Masato; Fujimoto, Shohei; Fujiwara, Hiroyuki, E-mail: fujiwara@gifu-u.ac.jp [Department of Electrical, Electronic and Computer Engineering, Gifu University, 1-1 Yanagido, Gifu 501-1193 (Japan); Tampo, Hitoshi; Kim, Kang Min; Kim, Shinho; Shibata, Hajime; Niki, Shigeru [Research Center for Photovoltaics, National Institute of Advanced Industrial Science and Technology (AIST), Central 2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan)
2016-08-14
In developing photovoltaic devices with high efficiencies, quantitative determination of the carrier loss is crucial. In conventional solar-cell characterization techniques, however, photocurrent reduction originating from parasitic light absorption and carrier recombination within the light absorber cannot be assessed easily. Here, we develop a general analysis scheme in which the optical and recombination losses in submicron-textured solar cells are evaluated systematically from external quantum efficiency (EQE) spectra. In this method, the optical absorption in solar cells is first deduced by imposing the anti-reflection condition in the calculation of the absorptance spectrum, and the carrier extraction from the light absorber layer is then modeled by considering a carrier collection length from the absorber interface. Our analysis method is appropriate for a wide variety of photovoltaic devices, including kesterite solar cells [Cu{sub 2}ZnSnSe{sub 4}, Cu{sub 2}ZnSnS{sub 4}, and Cu{sub 2}ZnSn(S,Se){sub 4}], zincblende CdTe solar cells, and hybrid perovskite (CH{sub 3}NH{sub 3}PbI{sub 3}) solar cells, and provides excellent fitting to numerous EQE spectra reported earlier. Based on the results obtained from our EQE analyses, we discuss the effects of parasitic absorption and carrier recombination in different types of solar cells.
Nakane, Akihiro; Tampo, Hitoshi; Tamakoshi, Masato; Fujimoto, Shohei; Kim, Kang Min; Kim, Shinho; Shibata, Hajime; Niki, Shigeru; Fujiwara, Hiroyuki
2016-08-01
In developing photovoltaic devices with high efficiencies, quantitative determination of the carrier loss is crucial. In conventional solar-cell characterization techniques, however, photocurrent reduction originating from parasitic light absorption and carrier recombination within the light absorber cannot be assessed easily. Here, we develop a general analysis scheme in which the optical and recombination losses in submicron-textured solar cells are evaluated systematically from external quantum efficiency (EQE) spectra. In this method, the optical absorption in solar cells is first deduced by imposing the anti-reflection condition in the calculation of the absorptance spectrum, and the carrier extraction from the light absorber layer is then modeled by considering a carrier collection length from the absorber interface. Our analysis method is appropriate for a wide variety of photovoltaic devices, including kesterite solar cells [Cu2ZnSnSe4, Cu2ZnSnS4, and Cu2ZnSn(S,Se)4], zincblende CdTe solar cells, and hybrid perovskite (CH3NH3PbI3) solar cells, and provides excellent fitting to numerous EQE spectra reported earlier. Based on the results obtained from our EQE analyses, we discuss the effects of parasitic absorption and carrier recombination in different types of solar cells.
Bano, N; Hussain, I; Sawaf, S; Alshammari, Abeer; Saleemi, F
2017-06-16
The size of ZnO nanorods (NRs) plays an important role in tuning the external quantum efficiency (EQE) and quality of light generated by white light emitting diodes (LEDs). In this work, we report on the enhancement of EQE and the quality of ZnO NR-based hetrojunction white LEDs fabricated on a p-GaN substrate using a low temperature solution method. Cathodoluminescence spectra demonstrate that ultraviolet (UV) emission decreases and visible deep band emission increases with an increase in the length of the ZnO NRs. The UV emission could be internally reabsorbed by the ZnO NR excitation, thus enhancing the emission intensity of the visible deep band. Photocurrent measurements validated the fact that the EQE depends on the size of ZnO NRs, increasing by 87% with an increase in the length of the ZnO NRs. Furthermore, the quality of white light was measured and clearly indicated an increase in the color rendering indices of the LEDs with an increase in the length of the ZnO NRs, confirming that the quality of light generated by LEDs can be tuned by varying the length of the ZnO NRs. These results suggest that the EQE and visible deep band emission from n-ZnONRs/p-GaN heterojunction LEDs can be effectively controlled by adjusting the length of the ZnO NRs, which can be useful for realizing tunable white LEDs.
Shin, Hyun; Lee, Jeong-Hwan; Moon, Chang-Ki; Huh, Jin-Suk; Sim, Bomi; Kim, Jang-Joo
2016-06-01
J.-J. Kim and co-workers achieve highly efficient blue organic light-emitting diodes (OLEDs) using a low-refractive-index layer. As described on page 4920, an external quantum efficiency over 34% is achieved, owing to the low refractive index of the materials. A milepost and a shining entrance of the castle are the metaphor indicating the way to highly efficient blue OLEDs. On the way to the castle, the depicted chemical structures serve as the light-emitting layer. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Interfacing external quantum devices to a universal quantum computer.
Lagana, Antonio A; Lohe, Max A; von Smekal, Lorenz
2011-01-01
We present a scheme to use external quantum devices using the universal quantum computer previously constructed. We thereby show how the universal quantum computer can utilize networked quantum information resources to carry out local computations. Such information may come from specialized quantum devices or even from remote universal quantum computers. We show how to accomplish this by devising universal quantum computer programs that implement well known oracle based quantum algorithms, namely the Deutsch, Deutsch-Jozsa, and the Grover algorithms using external black-box quantum oracle devices. In the process, we demonstrate a method to map existing quantum algorithms onto the universal quantum computer.
Interfacing external quantum devices to a universal quantum computer.
Directory of Open Access Journals (Sweden)
Antonio A Lagana
Full Text Available We present a scheme to use external quantum devices using the universal quantum computer previously constructed. We thereby show how the universal quantum computer can utilize networked quantum information resources to carry out local computations. Such information may come from specialized quantum devices or even from remote universal quantum computers. We show how to accomplish this by devising universal quantum computer programs that implement well known oracle based quantum algorithms, namely the Deutsch, Deutsch-Jozsa, and the Grover algorithms using external black-box quantum oracle devices. In the process, we demonstrate a method to map existing quantum algorithms onto the universal quantum computer.
Quantum Electrodynamics on background external fields
Marecki, P
2003-01-01
The quantum electrodynamics in presence of background external fields is developed. Modern methods of local quantum physics allow to formulate the theory on arbitrarily strong possibly time-dependent external fields. Non-linear observables which depend only locally on the external field are constructed. The tools necessary for this formulation, the parametrices of the Dirac operator, are investigated.
Quantum electrodynamics on background external fields
2003-01-01
The quantum electrodynamics in presence of background external fields is developed. Modern methods of local quantum physics allow to formulate the theory on arbitrarily strong possibly time-dependent external fields. Non-linear observables which depend only locally on the external field are constructed. The tools necessary for this formulation, the parametrices of the Dirac operator, are investigated.
Sorting quantum systems efficiently
Ionicioiu, Radu
2016-05-01
Measuring the state of a quantum system is a fundamental process in quantum mechanics and plays an essential role in quantum information and quantum technologies. One method to measure a quantum observable is to sort the system in different spatial modes according to the measured value, followed by single-particle detectors on each mode. Examples of quantum sorters are polarizing beam-splitters (PBS) – which direct photons according to their polarization – and Stern-Gerlach devices. Here we propose a general scheme to sort a quantum system according to the value of any d-dimensional degree of freedom, such as spin, orbital angular momentum (OAM), wavelength etc. Our scheme is universal, works at the single-particle level and has a theoretical efficiency of 100%. As an application we design an efficient OAM sorter consisting of a single multi-path interferometer which is suitable for a photonic chip implementation.
Institute of Scientific and Technical Information of China (English)
Bingxin Kang; Yi Cai; Lingxue Wang
2016-01-01
A infrared light trapping structure combining front subwavelength gratings and rear ZnO:Al nanoparticles for a PtSi Schottky-barrier detector over a 3-5 μm waveband is theoretically investigated.By selecting the proper plasmonic material and optimizing the parameters for the proposed structure,the absorption of the PtSi layer is dramatically improved.The theoretical results show that this improvement eventually translates into an equivalent external quantum efficiency (EQE) enhancement of 2.46 times at 3-3.6 μm and 2.38 times at 3.6-5 μm compared to conventional structures.This improvement in the EQE mainly lies in the increase of light path lengths within the PtSi layer by the subwavelength grating diffraction and nanoparticle-scattering effects.
Energy Technology Data Exchange (ETDEWEB)
Brendel, Moritz, E-mail: moritz.brendel@fbh-berlin.de; Helbling, Markus; Knigge, Andrea; Brunner, Frank; Weyers, Markus [Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH), Gustav-Kirchhoff-Str. 4, 12489 Berlin (Germany)
2015-12-28
A comprehensive study on top- and bottom-illuminated Al{sub 0.5}Ga{sub 0.5}N/AlN metal-semiconductor-metal (MSM) photodetectors having different AlGaN absorber layer thickness is presented. The measured external quantum efficiency (EQE) shows pronounced threshold and saturation behavior as a function of applied bias voltage up to 50 V reaching about 50% for 0.1 μm and 67% for 0.5 μm thick absorber layers under bottom illumination. All experimental findings are in very good accordance with two-dimensional drift-diffusion modeling results. By taking into account macroscopic polarization effects in the hexagonal metal-polar +c-plane AlGaN/AlN heterostructures, new insights into the general device functionality of AlGaN-based MSM photodetectors are obtained. The observed threshold/saturation behavior is caused by a bias-dependent extraction of photoexcited holes from the Al{sub 0.5}Ga{sub 0.5}N/AlN interface. While present under bottom illumination for any AlGaN layer thickness, under top illumination this mechanism influences the EQE-bias characteristics only for thin layers.
Jiang, Z. C.; Lin, T. N.; Lin, H. T.; Talite, M. J.; Tzeng, T. T.; Hsu, C. L.; Chiu, K. P.; Lin, C. A. J.; Shen, J. L.; Yuan, C. T.
2016-01-01
Solution-processed, non-toxic carbon dots (CDs) have attracted much attention due to their unique photoluminescence (PL) properties. They are promising emissive layers for flexible light-emitting devices. To this end, the CDs in pristine aqueous solutions need to be transferred to form solid-state thin films without sacrificing their original PL characteristics. Unfortunately, solid-state PL quenching induced by extra non-radiative (NR) energy transfer among CDs would significantly hinder their practical applications in optoelectronics. Here, a facile, low-cost and effective method has been utilized to fabricate high-performance CD/polymer light-emitting flexible films with submicron-structured patterns. The patterned polymers can serve as a solid matrix to disperse and passivate CDs, thus achieving high internal quantum yields of 61%. In addition, they can act as an out-coupler to mitigate the waveguide-mode losses, approximately doubling the external light-extraction efficiency. Such CD/polymer composites also exhibit good photo-stability, and thus can be used as eco-friendly, low-cost phosphors for solid-state lighting.
Efficient quantum walk on a quantum processor
Qiang, Xiaogang; Loke, Thomas; Montanaro, Ashley; Aungskunsiri, Kanin; Zhou, Xiaoqi; O'Brien, Jeremy L.; Wang, Jingbo B.; Matthews, Jonathan C. F.
2016-05-01
The random walk formalism is used across a wide range of applications, from modelling share prices to predicting population genetics. Likewise, quantum walks have shown much potential as a framework for developing new quantum algorithms. Here we present explicit efficient quantum circuits for implementing continuous-time quantum walks on the circulant class of graphs. These circuits allow us to sample from the output probability distributions of quantum walks on circulant graphs efficiently. We also show that solving the same sampling problem for arbitrary circulant quantum circuits is intractable for a classical computer, assuming conjectures from computational complexity theory. This is a new link between continuous-time quantum walks and computational complexity theory and it indicates a family of tasks that could ultimately demonstrate quantum supremacy over classical computers. As a proof of principle, we experimentally implement the proposed quantum circuit on an example circulant graph using a two-qubit photonics quantum processor.
Efficient quantum walk on a quantum processor.
Qiang, Xiaogang; Loke, Thomas; Montanaro, Ashley; Aungskunsiri, Kanin; Zhou, Xiaoqi; O'Brien, Jeremy L; Wang, Jingbo B; Matthews, Jonathan C F
2016-05-05
The random walk formalism is used across a wide range of applications, from modelling share prices to predicting population genetics. Likewise, quantum walks have shown much potential as a framework for developing new quantum algorithms. Here we present explicit efficient quantum circuits for implementing continuous-time quantum walks on the circulant class of graphs. These circuits allow us to sample from the output probability distributions of quantum walks on circulant graphs efficiently. We also show that solving the same sampling problem for arbitrary circulant quantum circuits is intractable for a classical computer, assuming conjectures from computational complexity theory. This is a new link between continuous-time quantum walks and computational complexity theory and it indicates a family of tasks that could ultimately demonstrate quantum supremacy over classical computers. As a proof of principle, we experimentally implement the proposed quantum circuit on an example circulant graph using a two-qubit photonics quantum processor.
Energy Technology Data Exchange (ETDEWEB)
Park, Jun Hyuk; Lee, Jong Won; Kim, Dong Yeong; Kim, Jong Kyu, E-mail: kimjk@postech.ac.kr [Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang 790-784 (Korea, Republic of); Cho, Jaehee, E-mail: jcho@chonbuk.ac.kr [School of Semiconductor and Chemical Engineering, Semiconductor Physics Research Center, Chonbuk National University, Jeonju 54896 (Korea, Republic of); Schubert, E. Fred [Department for Electrical, Computer, and Systems Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Kim, Jungsub; Lee, Jinsub; Kim, Yong-Il; Park, Youngsoo [LED Business, Samsung Electronics, Yongin 446-920 (Korea, Republic of)
2016-01-14
The temperature-dependent external quantum efficiencies (EQEs) were investigated for a 620 nm AlGaInP red light-emitting diodes (LEDs), a 450 nm GaInN blue LED, and a 285 nm AlGaN deep-ultraviolet (DUV) LED. We observed distinct differences in the variation of the EQE with temperature and current density for the three types of LEDs. Whereas the EQE of the AlGaInP red LED increases as temperature decreases below room temperature, the EQEs of GaInN blue and AlGaN DUV LEDs decrease for the same change in temperature in a low-current density regime. The free carrier concentration, as determined from the dopant ionization energy, shows a strong material-system-specific dependence, leading to different degrees of asymmetry in carrier concentration for the three types of LEDs. We attribute the EQE variation of the red, blue, and DUV LEDs to the different degrees of asymmetry in carrier concentration, which can be exacerbated at cryogenic temperatures. As for the EQE variation with temperature in a high-current density regime, the efficiency droop for the AlGaInP red and GaInN blue LEDs becomes more apparent as temperature decreases, due to the deterioration of the asymmetry in carrier concentration. However, the EQE of the AlGaN DUV LED initially decreases, then reaches an EQE minimum point, and then increases again due to the field-ionization of acceptors by the Poole-Frenkel effect. The results elucidate that carrier transport phenomena allow for the understanding of the droop phenomenon across different material systems, temperatures, and current densities.
Park, Jun Hyuk; Lee, Jong Won; Kim, Dong Yeong; Cho, Jaehee; Schubert, E. Fred; Kim, Jungsub; Lee, Jinsub; Kim, Yong-Il; Park, Youngsoo; Kim, Jong Kyu
2016-01-01
The temperature-dependent external quantum efficiencies (EQEs) were investigated for a 620 nm AlGaInP red light-emitting diodes (LEDs), a 450 nm GaInN blue LED, and a 285 nm AlGaN deep-ultraviolet (DUV) LED. We observed distinct differences in the variation of the EQE with temperature and current density for the three types of LEDs. Whereas the EQE of the AlGaInP red LED increases as temperature decreases below room temperature, the EQEs of GaInN blue and AlGaN DUV LEDs decrease for the same change in temperature in a low-current density regime. The free carrier concentration, as determined from the dopant ionization energy, shows a strong material-system-specific dependence, leading to different degrees of asymmetry in carrier concentration for the three types of LEDs. We attribute the EQE variation of the red, blue, and DUV LEDs to the different degrees of asymmetry in carrier concentration, which can be exacerbated at cryogenic temperatures. As for the EQE variation with temperature in a high-current density regime, the efficiency droop for the AlGaInP red and GaInN blue LEDs becomes more apparent as temperature decreases, due to the deterioration of the asymmetry in carrier concentration. However, the EQE of the AlGaN DUV LED initially decreases, then reaches an EQE minimum point, and then increases again due to the field-ionization of acceptors by the Poole-Frenkel effect. The results elucidate that carrier transport phenomena allow for the understanding of the droop phenomenon across different material systems, temperatures, and current densities.
Efficient quantum walk on a quantum processor
Qiang, Xiaogang; Loke, Thomas; Montanaro, Ashley; Aungskunsiri, Kanin; Zhou, Xiao-Qi; O'Brien, Jeremy; Wang, Jingbo; Matthews, Jonathan
2016-01-01
The random walk formalism is used across a wide range of applications, from modelling share prices to predicting population genetics. Likewise quantum walks have shown much potential as a frame- work for developing new quantum algorithms. In this paper, we present explicit efficient quantum circuits for implementing continuous-time quantum walks on the circulant class of graphs. These circuits allow us to sample from the output probability distributions of quantum walks on circulant graphs ef...
Efficient Quantum Key Distribution
Ardehali, M; Chau, H F; Lo, H K
1998-01-01
We devise a simple modification that essentially doubles the efficiency of a well-known quantum key distribution scheme proposed by Bennett and Brassard (BB84). Our scheme assigns significantly different probabilities for the different polarization bases during both transmission and reception to reduce the fraction of discarded data. The actual probabilities used in the scheme are announced in public. As the number of transmitted signals increases, the efficiency of our scheme can be made to approach 100%. The security of our scheme (against single-photon eavesdropping strategies) is guaranteed by a refined analysis of accepted data which is employed to detect eavesdropping: Instead of lumping all the accepted data together to estimate a single error rate, we separate the accepted data into various subsets according to the basis employed and estimate an error rate for each subset individually. Our scheme is the first quantum key distribution with an efficiency greater than 50%. We remark that our idea is rath...
Efficient Quantum Pseudorandomness
Brandão, Fernando G. S. L.; Harrow, Aram W.; Horodecki, Michał
2016-04-01
Randomness is both a useful way to model natural systems and a useful tool for engineered systems, e.g., in computation, communication, and control. Fully random transformations require exponential time for either classical or quantum systems, but in many cases pseudorandom operations can emulate certain properties of truly random ones. Indeed, in the classical realm there is by now a well-developed theory regarding such pseudorandom operations. However, the construction of such objects turns out to be much harder in the quantum case. Here, we show that random quantum unitary time evolutions ("circuits") are a powerful source of quantum pseudorandomness. This gives for the first time a polynomial-time construction of quantum unitary designs, which can replace fully random operations in most applications, and shows that generic quantum dynamics cannot be distinguished from truly random processes. We discuss applications of our result to quantum information science, cryptography, and understanding the self-equilibration of closed quantum dynamics.
Efficient Quantum Pseudorandomness.
Brandão, Fernando G S L; Harrow, Aram W; Horodecki, Michał
2016-04-29
Randomness is both a useful way to model natural systems and a useful tool for engineered systems, e.g., in computation, communication, and control. Fully random transformations require exponential time for either classical or quantum systems, but in many cases pseudorandom operations can emulate certain properties of truly random ones. Indeed, in the classical realm there is by now a well-developed theory regarding such pseudorandom operations. However, the construction of such objects turns out to be much harder in the quantum case. Here, we show that random quantum unitary time evolutions ("circuits") are a powerful source of quantum pseudorandomness. This gives for the first time a polynomial-time construction of quantum unitary designs, which can replace fully random operations in most applications, and shows that generic quantum dynamics cannot be distinguished from truly random processes. We discuss applications of our result to quantum information science, cryptography, and understanding the self-equilibration of closed quantum dynamics.
Reconstructing quantum states efficiently
Cramer, M; Plenio, M. B.
2010-01-01
Quantum state tomography, the ability to deduce the density matrix of a quantum system from measured data, is of fundamental importance for the verification of present and future quantum devices. It has been realized in systems with few components but for larger systems it becomes rapidly infeasible because the number of quantum measurements and computational resources required to process them grow exponentially in the system size. Here we show that we can gain an exponential advantage over d...
RAM-Efficient External Memory Sorting
DEFF Research Database (Denmark)
Arge, Lars; Thorup, Mikkel
2013-01-01
In recent years a large number of problems have been considered in external memory models of computation, where the complexity measure is the number of blocks of data that are moved between slow external memory and fast internal memory (also called I/Os). In practice, however, internal memory time...... often dominates the total running time once I/O-efficiency has been obtained. In this paper we study algorithms for fundamental problems that are simultaneously I/O-efficient and internal memory efficient in the RAM model of computation....
Xu, Liang-Jin; Zeng, Xian-Chong; Wang, Jin-Yun; Zhang, Li-Yi; Chi, Yun; Chen, Zhong-Ning
2016-08-10
The utilization of phosphorescent metal cluster complexes as new types of emitting materials in organic light-emitting diodes (OLEDs) is becoming an alternative and viable approach for achieving high-efficiency electroluminescence. We report herein the design of cationic PtAu2 cluster complexes with differently positioned 9-phenylcarbazole-acetylides to serve as phosphorescent emitters in OLEDs. The rigid structures of PtAu2 complexes cause intense phosphorescence with quantum yields of over 85%, which originates from (3)[π(phenylcarbazole-acetylide) → π*(dpmp)] ligand-to-ligand and (3)[π(phenylcarbazole-acetylide) → p/s(PtAu2)] ligand-to-metal charge-transfer triplet excited states. When 8 wt % PtAu2 is doped to blended host materials of TCTA and OXD-7 (2:1 weight ratio) as light-emitting layers, solution-processed OLEDs give a current efficiency of 78.2 cd A(-1) and an external quantum efficiency (EQE) of 21.5% at a practical luminance of 1029 cd m(-2) with a slow efficiency roll-off upon increasing luminance. This represents the best device performance and the highest efficiency recorded at practical luminance for solution-processed OLEDs.
Quantum-enhanced Sensing and Efficient Quantum Computation
2015-07-27
Quantum -enhanced sensing and efficient quantum computation Ian Walmsley THE UNIVERSITY OF...COVERED (From - To) 1 February 2013 - 31 January 2015 4. TITLE AND SUBTITLE Quantum -enhanced sensing and efficient quantum computation 5a. CONTRACT...1895616013 Standard Form 298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 Final report for “ Quantum ‐Enhanced Sensing and Efficient Quantum Computation
Internal quantum efficiency modeling of silicon photodiodes.
Gentile, T R; Brown, S W; Lykke, K R; Shaw, P S; Woodward, J T
2010-04-01
Results are presented for modeling of the shape of the internal quantum efficiency (IQE) versus wavelength for silicon photodiodes in the 400 nm to 900 nm wavelength range. The IQE data are based on measurements of the external quantum efficiencies of three transmission optical trap detectors using an extensive set of laser wavelengths, along with the transmittance of the traps. We find that a simplified version of a previously reported IQE model fits the data with an accuracy of better than 0.01%. These results provide an important validation of the National Institute of Standards and Technology (NIST) spectral radiant power responsivity scale disseminated through the NIST Spectral Comparator Facility, as well as those scales disseminated by other National Metrology Institutes who have employed the same model.
Quantum mechanics in strong time dependent external fields
Energy Technology Data Exchange (ETDEWEB)
Pomeau, Y.
1986-01-01
In quantum mechanics, time dependent Hamiltonians are most often studied by perturbation methods, the amplitude of the unsteady force being assumed to be small. On two examples (two level system with a large time dependent coupling, and atoms in large external unsteady field). I show that the opposite limit (large time dependent field) can be analyzed in some details too. For a particle in a central potential and submitted to a large periodic external field, one is led to make a Kapitza averaging because the intrinsic frequency tends to zero when the external field diverges. In that way one has to introduce a steady effective potential with singular turning points.
The current density in quantum electrodynamics in external potentials
Energy Technology Data Exchange (ETDEWEB)
Schlemmer, Jan, E-mail: jan.schlemmer@univie.ac.at [Fakultät für Physik, Universität Wien, Boltzmanngasse 5, 1090 Wien (Austria); Zahn, Jochen, E-mail: jochen.zahn@itp.uni-leipzig.de [Institut für Theoretische Physik, Universität Leipzig, Brüderstr. 16, 04103 Leipzig (Germany)
2015-08-15
We review different definitions of the current density for quantized fermions in the presence of an external electromagnetic field. Several deficiencies in the popular prescription due to Schwinger and the mode sum formula for static external potentials are pointed out. We argue that Dirac’s method, which is the analog of the Hadamard point-splitting employed in quantum field theory in curved space–times, is conceptually the most satisfactory. As a concrete example, we discuss vacuum polarization and the stress–energy tensor for massless fermions in 1+1 dimension. Also a general formula for the vacuum polarization in static external potentials in 3+1 dimensions is derived.
Thermal Reservoir coupled to External Field and Quantum Dissipation
Patriarca, M; Patriarca, Fabrizio Illuminati & Marco
1992-01-01
In the framework of the Caldeira-Leggett model of dissipative quantum mechanics, we investigate the effects of the interaction of the thermal reservoir with an external field. In particular, we discuss how the interaction modifies the conservative dynamics of the central particle, and the mechanism of dissipation. We briefly comment on possible observable consequencies.
Quantum computing: Efficient fault tolerance
Gottesman, Daniel
2016-12-01
Dealing with errors in a quantum computer typically requires complex programming and many additional quantum bits. A technique for controlling errors has been proposed that alleviates both of these problems.
External efficiency of schools in pre-vocational secondary education
Timmermans, A. C.; Rekers-Mombarg, L. T. M.; Vreeburg, B. A. N. M.
2016-01-01
The extent to which students from a prevocational secondary school are placed in training programmes in senior secondary vocational education that match with their abilities can be estimated by an indicator called External Efficiency. However, estimating the external efficiency of secondary schools
Vehicle Fuel-Efficiency Choices, Emission Externalities, and Urban Sprawl
DEFF Research Database (Denmark)
Kim, Jinwon
of excessive sprawl arising from emission externalities is the uses of larger and less-fuel efficient vehicles by suburban residents, which is different from that of congestion externalities. We also analyze the effect of the Corporate Average Fuel Efficiency (CAFE) regulation on the urban spatial structure....
Mid-infrared interband cascade photodetectors with high quantum efficiency
Tian, Zhao-Bing; Singh, Anjali; Rigg, Kevin; Krishna, Sanjay
2016-02-01
Antimony-based Interband Cascade (IC) photodetectors are emerging as viable candidates for highperformance infrared applications, especially at high operating temperatures. In our previous IC detector designs using InAs/GaSb Type-II superlattices, the quantum efficiency was relatively low as the designs were optimized for high signal to noise ratio. Here we report our recent development of low-noise mid-IR IC photodetectors with high external quantum efficiency. By adopting IC detectors with thicker absorber designs, the quantum efficiency of these mid-IR IC detectors has been increased up to 35%. These IC devices continue to have low-dark current and high temperature operations. Some further analysis on the device characteristics is also presented.
Efficient entanglement distillation without quantum memory
Abdelkhalek, Daniela; Syllwasschy, Mareike; Cerf, Nicolas J.; Fiurášek, Jaromír; Schnabel, Roman
2016-01-01
Entanglement distribution between distant parties is an essential component to most quantum communication protocols. Unfortunately, decoherence effects such as phase noise in optical fibres are known to demolish entanglement. Iterative (multistep) entanglement distillation protocols have long been proposed to overcome decoherence, but their probabilistic nature makes them inefficient since the success probability decays exponentially with the number of steps. Quantum memories have been contemplated to make entanglement distillation practical, but suitable quantum memories are not realised to date. Here, we present the theory for an efficient iterative entanglement distillation protocol without quantum memories and provide a proof-of-principle experimental demonstration. The scheme is applied to phase-diffused two-mode-squeezed states and proven to distil entanglement for up to three iteration steps. The data are indistinguishable from those that an efficient scheme using quantum memories would produce. Since our protocol includes the final measurement it is particularly promising for enhancing continuous-variable quantum key distribution. PMID:27241946
Efficient entanglement distillation without quantum memory
Abdelkhalek, Daniela; Syllwasschy, Mareike; Cerf, Nicolas J.; Fiurášek, Jaromír; Schnabel, Roman
2016-05-01
Entanglement distribution between distant parties is an essential component to most quantum communication protocols. Unfortunately, decoherence effects such as phase noise in optical fibres are known to demolish entanglement. Iterative (multistep) entanglement distillation protocols have long been proposed to overcome decoherence, but their probabilistic nature makes them inefficient since the success probability decays exponentially with the number of steps. Quantum memories have been contemplated to make entanglement distillation practical, but suitable quantum memories are not realised to date. Here, we present the theory for an efficient iterative entanglement distillation protocol without quantum memories and provide a proof-of-principle experimental demonstration. The scheme is applied to phase-diffused two-mode-squeezed states and proven to distil entanglement for up to three iteration steps. The data are indistinguishable from those that an efficient scheme using quantum memories would produce. Since our protocol includes the final measurement it is particularly promising for enhancing continuous-variable quantum key distribution.
Efficient entanglement distillation without quantum memory.
Abdelkhalek, Daniela; Syllwasschy, Mareike; Cerf, Nicolas J; Fiurášek, Jaromír; Schnabel, Roman
2016-05-31
Entanglement distribution between distant parties is an essential component to most quantum communication protocols. Unfortunately, decoherence effects such as phase noise in optical fibres are known to demolish entanglement. Iterative (multistep) entanglement distillation protocols have long been proposed to overcome decoherence, but their probabilistic nature makes them inefficient since the success probability decays exponentially with the number of steps. Quantum memories have been contemplated to make entanglement distillation practical, but suitable quantum memories are not realised to date. Here, we present the theory for an efficient iterative entanglement distillation protocol without quantum memories and provide a proof-of-principle experimental demonstration. The scheme is applied to phase-diffused two-mode-squeezed states and proven to distil entanglement for up to three iteration steps. The data are indistinguishable from those that an efficient scheme using quantum memories would produce. Since our protocol includes the final measurement it is particularly promising for enhancing continuous-variable quantum key distribution.
Energy Technology Data Exchange (ETDEWEB)
Guo, Ke; Verschuuren, Marc A. [Philips Research Laboratories, High Tech Campus 4, 5656 AE Eindhoven (Netherlands); Lozano, Gabriel [Center for Nanophotonics, FOM Institute AMOLF, c/o Philips Research Laboratories, High Tech Campus 4, 5656 AE Eindhoven (Netherlands); Gómez Rivas, Jaime, E-mail: J.Gomez@amolf.nl [Center for Nanophotonics, FOM Institute AMOLF, c/o Philips Research Laboratories, High Tech Campus 4, 5656 AE Eindhoven (Netherlands); COBRA Research Institute, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands)
2015-08-21
Optical losses in metals represent the largest limitation to the external quantum yield of emitters coupled to plasmonic antennas. These losses can be at the emission wavelength, but they can be more important at shorter wavelengths, i.e., at the excitation wavelength of the emitters, where the conductivity of metals is usually lower. We present accurate measurements of the absolute external photoluminescent quantum yield of a thin layer of emitting material deposited over a periodic nanoantenna phased array. Emission and absorptance measurements of the sample are performed using a custom-made setup including an integrating sphere and variable angle excitation. The measurements reveal a strong dependence of the external quantum yield on the angle at which the optical field excites the sample. Such behavior is attributed to the coupling between far-field illumination and near-field excitation mediated by the collective resonances supported by the array. Numerical simulations confirm that the inherent losses associated with the metal can be greatly reduced by selecting an optimum angle of illumination, which boosts the light conversion efficiency in the emitting layer. This combined experimental and numerical characterization of the emission from plasmonic arrays reveals the need to carefully design the illumination to achieve the maximum external quantum yield.
Efficient Quantum Secure Direct Communication with Authentication
Institute of Scientific and Technical Information of China (English)
LIU Wen-Jie; CHEN Han-Wu; LI Zhi-Qiang; LIU Zhi-Hao
2008-01-01
Two protocols of quantum direct communication with authentication [Phys. Rev. A 73 (2006) 042305] were recently indicated to be insecure against the authenticator Trent attacks [Phys. Rev. A 75 (2007) 026301]. We present two efficient protocols by using four Pauli operations, which are secure against inner Trent attacks as well as outer Eve attacks. Finally, we generalize them to multiparty quantum direction communication.
有机电致发光器件外量子效率提高方法%Methods to Improve External Quantum Efficiency of Organic Light-emitting Diodes
Institute of Scientific and Technical Information of China (English)
贺小光; 姚春梅
2015-01-01
It is important to find methods to enhance the quantum efficiency of organic light-emitting diodes to make it more and more practical. In this paper, we made some introduction of efficiency optimization scheme:to improve the degree of vacuum chamber, control the temperature of the vacuum chamber, fabricate OLEDs using multifunctional layer structure, improve the carrier injection efficiency, improve the film surface cleanliness and uniformity, modification surface of functional layers, choose high fluorescence quantum efficien-cy materials, using the triplet excitons, etc.%在有机电致发光器件实用化进程中，如何提高有机电致发光器件的外量子效率是非常重要的科学问题。本文介绍了几种优化效率的方案：提高腔体真空度、控制真空腔体的温度、OLED采用多功能层结构、提高载流子注入效率、提高薄膜的表面洁净度、提高薄膜的均匀性、功能薄膜表面修饰、选择荧光量子效率较高的材料制备发光层、利用三线态激子等。
Tunable single and dual mode operation of an external cavity quantum-dot injection laser
Energy Technology Data Exchange (ETDEWEB)
Biebersdorf, A [Photonics and Optoelectronics Group, Physics Department and CeNS, Ludwig-Maximilians-Universitaet, Amalienstrasse 54, D-80799 Munich (Germany); Lingk, C [Photonics and Optoelectronics Group, Physics Department and CeNS, Ludwig-Maximilians-Universitaet, Amalienstrasse 54, D-80799 Munich (Germany); De Giorgi, M [Photonics and Optoelectronics Group, Physics Department and CeNS, Ludwig-Maximilians-Universitaet, Amalienstrasse 54, D-80799 Munich (Germany); Feldmann, J [Photonics and Optoelectronics Group, Physics Department and CeNS, Ludwig-Maximilians-Universitaet, Amalienstrasse 54, D-80799 Munich (Germany); Sacher, J [Sacher Lasertechnik GmbH, Hannah Arendt Strasse 3-7, D-35037 Marburg (Germany); Arzberger, M [Walter Schottky Institut, Technische Universitaet Muenchen, Am Coulombwall, D-85748 Garching (Germany); Ulbrich, C [Walter Schottky Institut, Technische Universitaet Muenchen, Am Coulombwall, D-85748 Garching (Germany); Boehm, G [Walter Schottky Institut, Technische Universitaet Muenchen, Am Coulombwall, D-85748 Garching (Germany); Amann, M-C [Walter Schottky Institut, Technische Universitaet Muenchen, Am Coulombwall, D-85748 Garching (Germany); Abstreiter, G [Walter Schottky Institut, Technische Universitaet Muenchen, Am Coulombwall, D-85748 Garching (Germany)
2003-08-21
We investigate quantum-dot (QD) lasers in an external cavity using Littrow and Littman configurations. Here, we report on a continuously tunable QD laser with a broad tuning range from 1047 to 1130 nm with high stability and efficient side mode suppression. The full-width at half-maximum of the laser line is 0.85 nm determined mainly by the quality of the external grating. This laser can be operated in a dual-mode modus, where the mode-spacing can be tuned continuously between 1.1 and 34 nm. Simultaneous emission of the two laser modes is shown by sum frequency generation experiments.
Apparent bandgap shift in the internal quantum efficiency for solar cells with back reflectors
Steiner, M. A.; Perl, E. E.; Geisz, J. F.; Friedman, D. J.; Jain, N.; Levi, D.; Horner, G.
2017-04-01
We demonstrate that in solar cells with highly reflective back mirrors, the measured internal quantum efficiency exhibits a shift in bandgap relative to the measured external quantum efficiency. The shift arises from the fact that the measured reflectance at the front surface includes a superposition of waves reflecting from the front and back surfaces. We quantify the magnitude of the apparent shift and discuss the errors that can result in determination of quantities such as the photocurrent. Because of this apparent shift, it is important the bandgap be determined from the external quantum efficiency.
External Source Method for Kubo-Transformed Quantum Correlation Functions
Horikoshi, Atsushi
2014-01-01
We revisit the external source method for Kubo-transformed quantum correlation functions recently proposed by Krishna and Voth. We derive an exact formula and show that the Krishna-Voth formula can be derived as an approximation of our formula. Some properties of this approximation are clarified through a model calculation of the position autocorrelation function for a one-dimensional harmonic oscillator. A key observation is that the Krishna-Voth correlation function has a term which behaves as the secular term in perturbation theory.
Energy-efficient quantum computing
Ikonen, Joni; Salmilehto, Juha; Möttönen, Mikko
2017-04-01
In the near future, one of the major challenges in the realization of large-scale quantum computers operating at low temperatures is the management of harmful heat loads owing to thermal conduction of cabling and dissipation at cryogenic components. This naturally raises the question that what are the fundamental limitations of energy consumption in scalable quantum computing. In this work, we derive the greatest lower bound for the gate error induced by a single application of a bosonic drive mode of given energy. Previously, such an error type has been considered to be inversely proportional to the total driving power, but we show that this limitation can be circumvented by introducing a qubit driving scheme which reuses and corrects drive pulses. Specifically, our method serves to reduce the average energy consumption per gate operation without increasing the average gate error. Thus our work shows that precise, scalable control of quantum systems can, in principle, be implemented without the introduction of excessive heat or decoherence.
Efficient self-consistent quantum transport simulator for quantum devices
Energy Technology Data Exchange (ETDEWEB)
Gao, X., E-mail: xngao@sandia.gov; Mamaluy, D.; Nielsen, E.; Young, R. W.; Lilly, M. P.; Bishop, N. C.; Carroll, M. S.; Muller, R. P. [Sandia National Laboratories, 1515 Eubank SE, Albuquerque, New Mexico 87123 (United States); Shirkhorshidian, A. [Sandia National Laboratories, 1515 Eubank SE, Albuquerque, New Mexico 87123 (United States); University of New Mexico, Albuquerque, New Mexico 87131 (United States)
2014-04-07
We present a self-consistent one-dimensional (1D) quantum transport simulator based on the Contact Block Reduction (CBR) method, aiming for very fast and robust transport simulation of 1D quantum devices. Applying the general CBR approach to 1D open systems results in a set of very simple equations that are derived and given in detail for the first time. The charge self-consistency of the coupled CBR-Poisson equations is achieved by using the predictor-corrector iteration scheme with the optional Anderson acceleration. In addition, we introduce a new way to convert an equilibrium electrostatic barrier potential calculated from an external simulator to an effective doping profile, which is then used by the CBR-Poisson code for transport simulation of the barrier under non-zero biases. The code has been applied to simulate the quantum transport in a double barrier structure and across a tunnel barrier in a silicon double quantum dot. Extremely fast self-consistent 1D simulations of the differential conductance across a tunnel barrier in the quantum dot show better qualitative agreement with experiment than non-self-consistent simulations.
Resource-efficient linear optical quantum computation.
Browne, Daniel E; Rudolph, Terry
2005-07-01
We introduce a scheme for linear optics quantum computation, that makes no use of teleported gates, and requires stable interferometry over only the coherence length of the photons. We achieve a much greater degree of efficiency and a simpler implementation than previous proposals. We follow the "cluster state" measurement based quantum computational approach, and show how cluster states may be efficiently generated from pairs of maximally polarization entangled photons using linear optical elements. We demonstrate the universality and usefulness of generic parity measurements, as well as introducing the use of redundant encoding of qubits to enable utilization of destructive measurements--both features of use in a more general context.
Quantum Dot Spectrum Converters for Enhanced High Efficiency Photovoltaics Project
National Aeronautics and Space Administration — This research proposes to enhance solar cell efficiency, radiation resistance and affordability. The Quantum Dot Spectrum Converter (QDSC) disperses quantum dots...
Time Evolution in the external field problem of Quantum Electrodynamics
Lazarovici, Dustin
2013-01-01
A general problem of quantum field theories is the fact that the free vacuum and the vacuum for an interacting theory belong to different, non-equivalent representations of the canonical (anti-)commutation relations. In the external field problem of QED, we encounter this problem in the form that the Dirac time evolution for an external field with non-vanishing magnetic components will not satisfy the Shale-Stinespring condition, known to be necessary and sufficient for the existence of an implementation on the fermionic Fock space. Therefore, a second quantization of the time evolution in the usual way is impossible. In this thesis, we present several rigorous approaches to QED with time-dependent, external fields and analyze in what sense a time evolution can exist in the second quantized theory. We study different constructions of the fermionic Fock space and prove their equivalence. We study and compare the results of Deckert et. al. (2010), where the time evolution is realized as unitary transformations ...
Highly Efficient Perovskite-Quantum-Dot Light-Emitting Diodes by Surface Engineering
Pan, Jun
2016-08-16
A two-step ligand-exchange strategy is developed, in which the long-carbon-chain ligands on all-inorganic perovskite (CsPbX3, X = Br, Cl) quantum dots (QDs) are replaced with halide-ion-pair ligands. Green and blue light-emitting diodes made from the halide-ion-paircapped quantum dots exhibit high external quantum efficiencies compared with the untreated QDs.
Worst-case efficient external-memory priority queues
DEFF Research Database (Denmark)
Brodal, Gerth Stølting; Katajainen, Jyrki
1998-01-01
. In this paper a priority-queue implementation is given which is efficient with respect to the number of block transfers or I/Os performed between the internal and external memories of a computer. Let B and M denote the respective capacity of a block and the internal memory measured in elements. The developed...
Delocalized Quantum States Enhance Photocell Efficiency
Zhang, Yiteng; Alharbi, Fahhad H; Engel, Greg; Kais, Sabre
2014-01-01
The high quantum efficiency of photosynthetic complexes has inspired researchers to explore new routes to utilize this process for photovoltaic devices. Quantum coherence has been demonstrated to play a crucial role within this process. Herein, we propose a three-dipole system as a model of a new photocell type which exploits the coherence among its three dipoles. We have proved that the efficiency of such a photocell is greatly enhanced by quantum coherence. We have also predicted that the photocurrents can be enhanced by about 49.5 % in such a coherent coupled dipole system compared with the uncoupled dipoles. These results suggest a promising novel design aspect of photosynthesis-mimicking photovoltaic devices.
Efficient quantum circuits for one-way quantum computing.
Tanamoto, Tetsufumi; Liu, Yu-Xi; Hu, Xuedong; Nori, Franco
2009-03-13
While Ising-type interactions are ideal for implementing controlled phase flip gates in one-way quantum computing, natural interactions between solid-state qubits are most often described by either the XY or the Heisenberg models. We show an efficient way of generating cluster states directly using either the imaginary SWAP (iSWAP) gate for the XY model, or the sqrt[SWAP] gate for the Heisenberg model. Our approach thus makes one-way quantum computing more feasible for solid-state devices.
Improving quantum sensing efficiency with virtual modes
Lanzagorta, Marco; Uhlmann, Jeffrey; Le, Truc; Jitrik, Oliverio; Venegas-Andraca, Salvador E.
2016-05-01
Recent research suggests that quantum radar offers several potential advantages over classical sensing technologies. At present, the primary practical challenge is the fast and efficient generation of entangled microwave photons. To mitigate this limitation we propose and briefly examine a distributed architecture to synthetically increase the number of effectively-distinguishable modes.
High efficiency quantum cascade laser frequency comb
Lu, Quanyong; Wu, Donghai; Slivken, Steven; Razeghi, Manijeh
2017-03-01
An efficient mid-infrared frequency comb source is of great interest to high speed, high resolution spectroscopy and metrology. Here we demonstrate a mid-IR quantum cascade laser frequency comb with a high power output and narrow beatnote linewidth at room temperature. The active region was designed with a strong-coupling between the injector and the upper lasing level for high internal quantum efficiency and a broadband gain. The group velocity dispersion was engineered for efficient, broadband mode-locking via four wave mixing. The comb device exhibits a narrow intermode beatnote linewidth of 50.5 Hz and a maximum wall-plug efficiency of 6.5% covering a spectral coverage of 110 cm‑1 at λ ~ 8 μm. The efficiency is improved by a factor of 6 compared with previous demonstrations. The high power efficiency and narrow beatnote linewidth will greatly expand the applications of quantum cascade laser frequency combs including high-precision remote sensing and spectroscopy.
High efficiency quantum cascade laser frequency comb
Lu, Quanyong; Wu, Donghai; Slivken, Steven; Razeghi, Manijeh
2017-01-01
An efficient mid-infrared frequency comb source is of great interest to high speed, high resolution spectroscopy and metrology. Here we demonstrate a mid-IR quantum cascade laser frequency comb with a high power output and narrow beatnote linewidth at room temperature. The active region was designed with a strong-coupling between the injector and the upper lasing level for high internal quantum efficiency and a broadband gain. The group velocity dispersion was engineered for efficient, broadband mode-locking via four wave mixing. The comb device exhibits a narrow intermode beatnote linewidth of 50.5 Hz and a maximum wall-plug efficiency of 6.5% covering a spectral coverage of 110 cm−1 at λ ~ 8 μm. The efficiency is improved by a factor of 6 compared with previous demonstrations. The high power efficiency and narrow beatnote linewidth will greatly expand the applications of quantum cascade laser frequency combs including high-precision remote sensing and spectroscopy. PMID:28262834
Efficient quantum computing using coherent photon conversion.
Langford, N K; Ramelow, S; Prevedel, R; Munro, W J; Milburn, G J; Zeilinger, A
2011-10-12
Single photons are excellent quantum information carriers: they were used in the earliest demonstrations of entanglement and in the production of the highest-quality entanglement reported so far. However, current schemes for preparing, processing and measuring them are inefficient. For example, down-conversion provides heralded, but randomly timed, single photons, and linear optics gates are inherently probabilistic. Here we introduce a deterministic process--coherent photon conversion (CPC)--that provides a new way to generate and process complex, multiquanta states for photonic quantum information applications. The technique uses classically pumped nonlinearities to induce coherent oscillations between orthogonal states of multiple quantum excitations. One example of CPC, based on a pumped four-wave-mixing interaction, is shown to yield a single, versatile process that provides a full set of photonic quantum processing tools. This set satisfies the DiVincenzo criteria for a scalable quantum computing architecture, including deterministic multiqubit entanglement gates (based on a novel form of photon-photon interaction), high-quality heralded single- and multiphoton states free from higher-order imperfections, and robust, high-efficiency detection. It can also be used to produce heralded multiphoton entanglement, create optically switchable quantum circuits and implement an improved form of down-conversion with reduced higher-order effects. Such tools are valuable building blocks for many quantum-enabled technologies. Finally, using photonic crystal fibres we experimentally demonstrate quantum correlations arising from a four-colour nonlinear process suitable for CPC and use these measurements to study the feasibility of reaching the deterministic regime with current technology. Our scheme, which is based on interacting bosonic fields, is not restricted to optical systems but could also be implemented in optomechanical, electromechanical and superconducting
Quantum Otto cycle efficiency on coupled qudits
Ivanchenko, E. A.
2015-09-01
Properties of the coupled particles with spin 3/2 (quartits) in a constant magnetic field, as a working substance in the quantum Otto cycle of the heat engine, are considered. It is shown that this system as a converter of heat energy in work (i) shows the efficiency 1 at the negative absolute temperatures of heat baths, (ii) at the temperatures of the opposite sign the efficiency approaches 1, (iii) at the positive temperatures of heat baths antiferromagnetic interaction raises efficiency threefold in comparison with uncoupled particles.
Enhancing Otto-Mobile Efficiency via Addition of a Quantum Carnot Cycle
Opatrný, Tomáš; Scully, Marlan O.
2003-09-01
It was shown recently that one can improve the efficiency of the Otto cycle by taking advantage of the internal degrees of freedom of an ideal gas [M. O. Scully, “The Quantum Afterburner”, Phys. Rev. Lett., to be published]. Here we discuss the limiting improvement of the efficiency by considering reversible cycles with both internal and external degrees of freedom.
Effects of external fields, dimension and polarization on the resonance fluorescence of quantum dots
Energy Technology Data Exchange (ETDEWEB)
Vaseghi, B., E-mail: vaseghi@mail.yu.ac.ir; Razavi, S.M.
2017-02-01
In this paper simultaneous effects of external electric and magnetic fields, dimension and polarization on the resonance fluorescence spectrum and photon statistics of a spherical quantum dot with parabolic confinement are investigated. With special attention to the optical scattering processes resonance fluorescence spectrum and second-order correlation function are calculated and plotted for different external parameters. Our results show the occurrence of resonance fluorescence similar to atomic systems and considerable effects of external fields, quantum confinement and light polarization on the resonance fluorescence spectrum and second-order correlation function in the quantum dot systems. The existence of Mollow triplets and photon antibunching are strongly depend on these external agents.
Effects of external fields, dimension and polarization on the resonance fluorescence of quantum dots
Vaseghi, B.; Razavi, S. M.
2017-02-01
In this paper simultaneous effects of external electric and magnetic fields, dimension and polarization on the resonance fluorescence spectrum and photon statistics of a spherical quantum dot with parabolic confinement are investigated. With special attention to the optical scattering processes resonance fluorescence spectrum and second-order correlation function are calculated and plotted for different external parameters. Our results show the occurrence of resonance fluorescence similar to atomic systems and considerable effects of external fields, quantum confinement and light polarization on the resonance fluorescence spectrum and second-order correlation function in the quantum dot systems. The existence of Mollow triplets and photon antibunching are strongly depend on these external agents.
Directory of Open Access Journals (Sweden)
Somesree GhoshMitra
2011-08-01
Full Text Available Quantum Dots (QDs have become an interesting subject of study for labeling and drug delivery in biomedical research due to their unique responses to external stimuli. In this paper, the biological effects of a novel hydrogel based QD nano-structure on E. coli bacteria are presented. The experimental evidence reveals that cadmium telluride (CdTe QDs that are encapsulated inside biocompatible polymeric shells have reduced or negligible toxicity to this model cell system, even when exposed at higher dosages. Furthermore, a preliminary gene expression study indicates that QD-hydrogel nanospheres do not inhibit the Green Fluorescent Protein (GFP gene expression. As the biocompatible and externally tunable polymer shells possess the capability to control the QD packing density at nanometer scales, the resulting luminescence efficiency of the nanostructures, besides reducing the cytotoxic potential, may be suitable for various biomedical applications.
Quantum Confined Semiconductors for High Efficiency Photovoltaics
Beard, Matthew
2014-03-01
Semiconductor nanostructures, where at least one dimension is small enough to produce quantum confinement effects, provide new pathways for controlling energy flow and therefore have the potential to increase the efficiency of the primary photon-to-free energy conversion step. In this discussion, I will present the current status of research efforts towards utilizing the unique properties of colloidal quantum dots (NCs confined in three dimensions) in prototype solar cells and demonstrate that these unique systems have the potential to bypass the Shockley-Queisser single-junction limit for solar photon conversion. The solar cells are constructed using a low temperature solution based deposition of PbS or PbSe QDs as the absorber layer. Different chemical treatments of the QD layer are employed in order to obtain good electrical communication while maintaining the quantum-confined properties of the QDs. We have characterized the transport and carrier dynamics using a transient absorption, time-resolved THz, and temperature-dependent photoluminescence. I will discuss the interplay between carrier generation, recombination, and mobility within the QD layers. A unique aspect of our devices is that the QDs exhibit multiple exciton generation with an efficiency that is ~ 2 to 3 times greater than the parental bulk semiconductor.
Qin, Hao; Kumar, Rupesh; Alleaume, Romain
2015-10-01
We report here a new side channel attack on a practical continuous-variable (CV) quantum key distribution (QKD) system. Inspired by blinding attack in discrete-variable QKD, we formalize an attack strategy by inserting an external light into a CV QKD system implemented Gaussian-modulated coherent state protocol and show that our attack can compromise its practical security. In this attack, we concern imperfections of a balanced homodyne detector used in CV QKD. According to our analysis, if one inserts an external light into Bob's signal port, due to the imperfect subtraction from the homodyne detector, the leakage of the external light contributes a displacement on the homodyne signal which causes detector electronics saturation. In consequence, Bob's quadrature measurement is not linear with the quadrature sent by Alice. By considering such vulnerability, a potential Eve can launch a full intercept-resend attack meanwhile she inserts an external light into Bob's signal port. By selecting proper properties of the external light, Eve actively controls the induced displacement value from the inserted light which results saturation of homodyne detection. In consequence, Eve can bias the excess noise due to the intercept-resend attack and the external light, such that Alice and Bob believe their excess noise estimation is below the null key threshold and they can still share a secret key. Our attack shows that the detector loopholes also exist in CV QKD, and it seems influence all the CV QKD systems using homodyne detection, since all the practical detectors have finite detection range.
Quantum wells for high-efficiency photovoltaics
Alonso-Álvarez, Diego; Ekins-Daukes, Nicholas
2016-03-01
Over the last couple of decades, there has been an intense research on strain balanced semiconductor quantum wells (QW) to increase the efficiency of multi-junction solar (MJ) solar cells grown monolithically on germanium. So far, the most successful application of QWs have required just to tailor a few tens of nanometers the absorption edge of a given subcell in order to reach the optimum spectral position. However, the demand for higher efficiency devices requiring 3, 4 or more junctions, represents a major difference in the challenges QWs must face: tailoring the absorption edge of a host material is not enough, but a complete new device, absorbing light in a different spectral region, must be designed. Among the most important issues to solve is the need for an optically thick structure to absorb enough light while keeping excellent carrier extraction using highly strained materials. Improvement of the growth techniques, smarter device designs - involving superlattices and shifted QWs, for example - or the use of quantum wires rather than QWs, have proven to be very effective steps towards high efficient MJ solar cells based on nanostructures in the last couple of years. But more is to be done to reach the target performances. This work discusses all these challenges, the limitations they represent and the different approaches that are being used to overcome them.
Duality quantum algorithm efficiently simulates open quantum systems
Shi-Jie Wei; Dong Ruan; Gui-Lu Long
2016-01-01
Because of inevitable coupling with the environment, nearly all practical quantum systems are open system, where the evolution is not necessarily unitary. In this paper, we propose a duality quantum algorithm for simulating Hamiltonian evolution of an open quantum system. In contrast to unitary evolution in a usual quantum computer, the evolution operator in a duality quantum computer is a linear combination of unitary operators. In this duality quantum algorithm, the time evolution of the op...
Efficient entanglement purification in quantum repeaters
Institute of Scientific and Technical Information of China (English)
Sheng Yu-Bo; Zhou Lan; Cheng Wei-Wen; Gong Long-Yan; Zhao Sheng-Mei; Zheng Bao-Yu
2012-01-01
We present an efficient entanglement purification protocol (EPP) with controlled-not (CNOT) gates and linear optics.With the CNOT gates,our EPP can reach a higher fidelity than the conventional one.Moreover,it does not require the fidelity of the initial mixed state to satisfy · · 1· 2.If the initial state is not entangled,it still can be purified.With the linear optics,this protocol can get pure maximally entangled pairs with some probabilities.Meanwhile,it can be used to purify the entanglement between the atomic ensembles in distant locations.This protocol may be useful in long-distance quantum communication.
Efficient Controlled Quantum Secure Direct Communication Protocols
Patwardhan, Siddharth; Moulick, Subhayan Roy; Prasanta K. Panigrahi
2015-01-01
We study controlled quantum secure direct communication (CQSDC), a cryptographic scheme where a sender can send a secret bit-string to an intended recipient, without any secure classical channel, who can obtain the complete bit-string only with the permission of a controller. We report an efficient protocol to realize CQSDC using Cluster state and then go on to construct a (2-3)-CQSDC using Brown state, where a coalition of any two of the three controllers is required to retrieve the complete...
Efficient Controlled Quantum Secure Direct Communication Protocols
Patwardhan, Siddharth; Moulick, Subhayan Roy; Panigrahi, Prasanta K.
2016-07-01
We study controlled quantum secure direct communication (CQSDC), a cryptographic scheme where a sender can send a secret bit-string to an intended recipient, without any secure classical channel, who can obtain the complete bit-string only with the permission of a controller. We report an efficient protocol to realize CQSDC using Cluster state and then go on to construct a (2-3)-CQSDC using Brown state, where a coalition of any two of the three controllers is required to retrieve the complete message. We argue both protocols to be unconditionally secure and analyze the efficiency of the protocols to show it to outperform the existing schemes while maintaining the same security specifications.
Analysis of Trace Gas Mixtures Using an External Cavity Quantum Cascade Laser Sensor
Energy Technology Data Exchange (ETDEWEB)
Phillips, Mark C.; Taubman, Matthew S.; Brumfield, Brian E.; Kriesel, Jason M.
2015-07-01
We measure and analyze mixtures of trace gases at ppb-ppm levels using an external cavity quantum cascade laser sensor with a 1-second response time. Accurate spectral fits are obtained in the presence of overlapping spectra.
Rapid Swept-Wavelength External Cavity Quantum Cascade Laser for Open Path Sensing
Energy Technology Data Exchange (ETDEWEB)
Brumfield, Brian E.; Phillips, Mark C.
2015-07-01
A rapidly tunable external cavity quantum cascade laser system is used for open path sensing. The system permits acquisition of transient absorption spectra over a 125 cm-1 tuning range in less than 0.01 s.
On-chip interference of single photons from an embedded quantum dot and an external laser
Energy Technology Data Exchange (ETDEWEB)
Prtljaga, N., E-mail: n.prtljaga@sheffield.ac.uk; Bentham, C.; O' Hara, J.; Royall, B.; Wilson, L. R.; Skolnick, M. S.; Fox, A. M. [Department of Physics and Astronomy, University of Sheffield, Sheffield S3 7RH (United Kingdom); Clarke, E. [Department of Electronic and Electrical Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom)
2016-06-20
In this work, we demonstrate the on-chip two-photon interference between single photons emitted by a single self-assembled InGaAs quantum dot and an external laser. The quantum dot is embedded within one arm of an air-clad directional coupler which acts as a beam-splitter for incoming light. Photons originating from an attenuated external laser are coupled to the second arm of the beam-splitter and then combined with the quantum dot photons, giving rise to two-photon quantum interference between dissimilar sources. We verify the occurrence of on-chip Hong-Ou-Mandel interference by cross-correlating the optical signal from the separate output ports of the directional coupler. This experimental approach allows us to use a classical light source (laser) to assess in a single step the overall device performance in the quantum regime and probe quantum dot photon indistinguishability on application realistic time scales.
Quantum Dynamics of Biological Plasma in the External Coulomb Field
Lasukov, V. V.; Lasukova, T. V.; Lasukova, O. V.
2013-10-01
A quantum solution to the truncated Fisher-Kolmogorov-Petrovskii-Piskunov equation with Coulomb convection and linear diffusion is derived. The quantum radiation of biological systems, individual microorganisms (cells, bacteria), and dust plasma particles in the Coulomb field is studied using the foregoing solution.
Efficiency dip observed with InGaN-based multiple quantum well solar cells
Lai, Kunyu
2014-01-01
The dip of external quantum efficiency (EQE) is observed on In0.15Ga0.85N/GaN multiple quantum well (MQW) solar cells upon the increase of incident optical power density. With indium composition increased to 25%, the EQE dip becomes much less noticeable. The composition dependence of EQE dip is ascribed to the competition between radiative recombination and photocurrent generation in the active region, which are dictated by quantum-confined Stark effect (QCSE) and composition fluctuation in the MQWs.
Duality quantum algorithm efficiently simulates open quantum systems.
Wei, Shi-Jie; Ruan, Dong; Long, Gui-Lu
2016-07-28
Because of inevitable coupling with the environment, nearly all practical quantum systems are open system, where the evolution is not necessarily unitary. In this paper, we propose a duality quantum algorithm for simulating Hamiltonian evolution of an open quantum system. In contrast to unitary evolution in a usual quantum computer, the evolution operator in a duality quantum computer is a linear combination of unitary operators. In this duality quantum algorithm, the time evolution of the open quantum system is realized by using Kraus operators which is naturally implemented in duality quantum computer. This duality quantum algorithm has two distinct advantages compared to existing quantum simulation algorithms with unitary evolution operations. Firstly, the query complexity of the algorithm is O(d(3)) in contrast to O(d(4)) in existing unitary simulation algorithm, where d is the dimension of the open quantum system. Secondly, By using a truncated Taylor series of the evolution operators, this duality quantum algorithm provides an exponential improvement in precision compared with previous unitary simulation algorithm.
Duality quantum algorithm efficiently simulates open quantum systems
Wei, Shi-Jie; Ruan, Dong; Long, Gui-Lu
2016-07-01
Because of inevitable coupling with the environment, nearly all practical quantum systems are open system, where the evolution is not necessarily unitary. In this paper, we propose a duality quantum algorithm for simulating Hamiltonian evolution of an open quantum system. In contrast to unitary evolution in a usual quantum computer, the evolution operator in a duality quantum computer is a linear combination of unitary operators. In this duality quantum algorithm, the time evolution of the open quantum system is realized by using Kraus operators which is naturally implemented in duality quantum computer. This duality quantum algorithm has two distinct advantages compared to existing quantum simulation algorithms with unitary evolution operations. Firstly, the query complexity of the algorithm is O(d3) in contrast to O(d4) in existing unitary simulation algorithm, where d is the dimension of the open quantum system. Secondly, By using a truncated Taylor series of the evolution operators, this duality quantum algorithm provides an exponential improvement in precision compared with previous unitary simulation algorithm.
An efficient quantum circuit analyser on qubits and qudits
Loke, T.; Wang, J. B.
2011-10-01
This paper presents a highly efficient decomposition scheme and its associated Mathematica notebook for the analysis of complicated quantum circuits comprised of single/multiple qubit and qudit quantum gates. In particular, this scheme reduces the evaluation of multiple unitary gate operations with many conditionals to just two matrix additions, regardless of the number of conditionals or gate dimensions. This improves significantly the capability of a quantum circuit analyser implemented in a classical computer. This is also the first efficient quantum circuit analyser to include qudit quantum logic gates.
High Efficiency Colloidal Quantum Dot Phosphors
Energy Technology Data Exchange (ETDEWEB)
Kahen, Keith
2013-12-31
The project showed that non-Cd containing, InP-based nanocrystals (semiconductor materials with dimensions of ~6 nm) have high potential for enabling next-generation, nanocrystal-based, on chip phosphors for solid state lighting. Typical nanocrystals fall short of the requirements for on chip phosphors due to their loss of quantum efficiency under the operating conditions of LEDs, such as, high temperature (up to 150 °C) and high optical flux (up to 200 W/cm2). The InP-based nanocrystals invented during this project maintain high quantum efficiency (>80%) in polymer-based films under these operating conditions for emission wavelengths ranging from ~530 to 620 nm. These nanocrystals also show other desirable attributes, such as, lack of blinking (a common problem with nanocrystals which limits their performance) and no increase in the emission spectral width from room to 150 °C (emitters with narrower spectral widths enable higher efficiency LEDs). Prior to these nanocrystals, no nanocrystal system (regardless of nanocrystal type) showed this collection of properties; in fact, other nanocrystal systems are typically limited to showing only one desirable trait (such as high temperature stability) but being deficient in other properties (such as high flux stability). The project showed that one can reproducibly obtain these properties by generating a novel compositional structure inside of the nanomaterials; in addition, the project formulated an initial theoretical framework linking the compositional structure to the list of high performance optical properties. Over the course of the project, the synthetic methodology for producing the novel composition was evolved to enable the synthesis of these nanomaterials at a cost approximately equal to that required for forming typical conventional nanocrystals. Given the above results, the last major remaining step prior to scale up of the nanomaterials is to limit the oxidation of these materials during the tens of
Energy Technology Data Exchange (ETDEWEB)
Tesfa, Sintayehu [Physics Department, Addis Ababa University, PO Box 1176, Addis Ababa (Ethiopia); Physics Department, Dilla University, PO Box 419, Dilla (Ethiopia)], E-mail: sint_tesfa@yahoo.com
2008-12-28
Analysis of the effects of external pumping on the quantum features, including entanglement, quantum nonlocality and nonclassical photon number correlations, of the cavity radiation of a correlated emission laser is presented. It turns out that the contribution of externally induced coherent superposition in demonstrating quantum nonlocality is significant. Despite the available evidence that entangled states can exhibit nonlocality for certain values of the rate at which the atoms are injected into the cavity and amplitude of the driving radiation, a direct relation between the degree of entanglement and quantum nonlocality cannot be established. However, it seems likely to make a consistent connection between the Cauchy-Schwarz and Bell-Clauser-Horne-Shimony-Holt inequalities. It is evident that comparison among various nonclassical correlations enhances the understanding of the otherwise intricate quantum theoretical predictions.
On the Structure of Quantum Gauge Theories with External Fields
Falkenberg, S; Lavrov, P M; Moshin, P
1998-01-01
We consider generating functionals of Green's functions with external fields in the framework of BV and BLT quantization schemes for general gauge theories. The corresponding Ward identities are obtained, and the gauge dependence is studied.
Detective quantum efficiency of the LODOX system
de Villiers, Mattieu; de Jager, Gerhard
2003-06-01
The Detective Quantum Efficiency (DQE) of a digital x-ray imaging system describes how much of the signal to noise ratio of the incident radiation is sustained in the resultant digital image. This measure of dose efficiency is suitable for the comparison of detectors produced by different manufacturers. The International Electrotechnical Commission (IEC) stipulates standard methods and conditions for the measurement of the DQE for single exposure imaging systems such as flat panel detectors. This paper shows how the calculation is adapted for DQE measurements of scanning systems. In this paper it is described how to measure the presampled Modulation Transfer Function (MTF) using an edge test method and how to extract the horizontal and vertical components of the Noise Power Spectrum (NPS) in a way that is insensitive to structured noise patterns often found in scanned images. The calculation of the total number of incident photons from the radiation dose measurement is explained and results are provided for the Lodox low dose full body digital x-ray scanning system which is developed in South Africa.
The detective quantum efficiency of an imaging detector
Energy Technology Data Exchange (ETDEWEB)
Zanella, G. [Padova Univ. (Italy). Dipartimento di Fisica and INFN; Zannoni, R. [Padova Univ. (Italy). Dipartimento di Fisica and INFN
1995-05-15
The efficiency of an imaging detector is a more extensive parameter than the quantum efficiency of a track detector or of a counter, as an image is created by the summation of many responses due to the single incoming quanta. This efficiency parameter is the so-called detective quantum efficiency (DQE). The paper illustrates the general meaning of DQE and the procedure to measure it. (orig.).
Absolute measurement of detector quantum efficiency using parametric downconversion.
Rarity, J G; Ridley, K D; Tapster, P R
1987-11-01
We show that a parametric downconversion crystal emitting angle resolved coincident photon pairs can be used to measure the absolute quantum efficiency of a photon counting detection system. We have measured the quantum efficiency of a silicon avalanche photodiode, operated in Geiger mode, as a function of operating voltage and compare this to results obtained using a conventional method.
Efficient Scheme for Optimizing Quantum Fourier Circuits
Institute of Scientific and Technical Information of China (English)
JIANG Min; ZHANG Zengke; Tzyh-Jong Tarn
2008-01-01
In quantum circuits, importing of additional qubits can reduce the operation time and prevent de-coherence induced by the environment. However, excessive qubits may make the quantum system vulner-able. This paper describes how to relax existing qubits without additional qubits to significantly reduce the operation time of the quantum Fourier circuit compared to a circuit without optimization. The results indicate that this scheme makes full use of the qubits relaxation. The concepts can be applied to improve similar quantum circuits and guide the physical implementations of quantum algorithms or devices.
Efficient external memory structures for range-aggregate queries
DEFF Research Database (Denmark)
Agarwal, P.K.; Yang, J.; Arge, L.;
2013-01-01
We present external memory data structures for efficiently answering range-aggregate queries. The range-aggregate problem is defined as follows: Given a set of weighted points in Rd, compute the aggregate of the weights of the points that lie inside a d-dimensional orthogonal query rectangle....... The aggregates we consider in this paper include count, sum, and max. First, we develop a structure for answering two-dimensional range-count queries that uses O(N/B) disk blocks and answers a query in View the MathML source I/Os, where N is the number of input points and B is the disk block size. The structure...... can be extended to obtain a near-linear-size structure for answering range-sum queries using View the MathML source I/Os, and a linear-size structure for answering range-max queries in View the MathML source I/Os. Our structures can be made dynamic and extended to higher dimensions....
Efficient quantum transmission in multiple-source networks.
Luo, Ming-Xing; Xu, Gang; Chen, Xiu-Bo; Yang, Yi-Xian; Wang, Xiaojun
2014-04-02
A difficult problem in quantum network communications is how to efficiently transmit quantum information over large-scale networks with common channels. We propose a solution by developing a quantum encoding approach. Different quantum states are encoded into a coherent superposition state using quantum linear optics. The transmission congestion in the common channel may be avoided by transmitting the superposition state. For further decoding and continued transmission, special phase transformations are applied to incoming quantum states using phase shifters such that decoders can distinguish outgoing quantum states. These phase shifters may be precisely controlled using classical chaos synchronization via additional classical channels. Based on this design and the reduction of multiple-source network under the assumption of restricted maximum-flow, the optimal scheme is proposed for specially quantized multiple-source network. In comparison with previous schemes, our scheme can greatly increase the transmission efficiency.
Energy Technology Data Exchange (ETDEWEB)
Botelho, Luiz C.L. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Matematica. Dept. de Matematica Aplicada]. E-mail: botelho.luiz@ig.com.br
2008-07-01
We analyze the triviality-quantum decoherence of Euclidean quantum chromodynamics in the gauge invariant quark current sector in the presence of an external U ({infinity}) flavor constant charged white noise reservoir. (author)
Vladimirov, Igor G
2012-01-01
The paper is concerned with open quantum systems whose Heisenberg dynamics are described by quantum stochastic differential equations driven by external boson fields. The system-field coupling operators are assumed to be quadratic polynomials of the system observables, with the latter satisfying canonical commutation relations. In combination with a cubic system Hamiltonian, this leads to a class of quasilinear quantum stochastic systems which retain algebraic closedness in the evolution of mixed moments of the observables. Although such a system is nonlinear and its quantum state is no longer Gaussian, the dynamics of the moments of any order are amenable to exact analysis, including the computation of their steady-state values. In particular, a generalized criterion is developed for quadratic stability of the quasilinear systems. The results of the paper are applicable to the generation of non-Gaussian quantum states with manageable moments and an optimal design of linear quantum controllers for quasilinear...
Internal quantum efficiency and tunable colour temperature in monolithic white InGaN/GaN LED
Titkov, Ilya E.; Yadav, Amit; Zerova, Vera L.; Zulonas, Modestas; Tsatsulnikov, Andrey F.; Lundin, Wsevolod V.; Sakharov, Alexey V.; Rafailov, Edik U.
2014-01-01
Internal Quantum Efficiency (IQE) of two-colour monolithic white light emitting diode (LED) was measured by temperature dependant electro-luminescence (TDEL) and analysed with modified rate equation based on ABC model. External, internal and injection efficiencies of blue and green quantum wells were analysed separately. Monolithic white LED contained one green InGaN QW and two blue QWs being separated by GaN barrier. This paper reports also the tunable behaviour of correlated colour temperat...
Quantum efficiency and oscillator strength of site-controlled InGaAs quantum dots
DEFF Research Database (Denmark)
Albert, F.; Schneider, C.; Stobbe, Søren
2010-01-01
We report on time-resolved photoluminescence spectroscopy to determine the oscillator strength (OS) and the quantum efficiency (QE) of site-controlled In(Ga)As quantum dots nucleating on patterned nanoholes. These two quantities are determined by measurements on site-controlled quantum dot (SCQD.......1±2.6 and an encouragingly high QE of (48±14)% for the SCQDs....
Quantum efficiency and oscillator strength of site-controlled InGaAs quantum dots
DEFF Research Database (Denmark)
Albert, F.; Schneider, C.; Stobbe, Søren;
2010-01-01
We report on time-resolved photoluminescence spectroscopy to determine the oscillator strength (OS) and the quantum efficiency (QE) of site-controlled In(Ga)As quantum dots nucleating on patterned nanoholes. These two quantities are determined by measurements on site-controlled quantum dot (SCQD...
Efficient, stable infrared photovoltaics based on solution-cast colloidal quantum dots.
Koleilat, Ghada I; Levina, Larissa; Shukla, Harnik; Myrskog, Stefan H; Hinds, Sean; Pattantyus-Abraham, Andras G; Sargent, Edward H
2008-05-01
Half of the sun's power lies in the infrared. As a result, the optimal bandgaps for solar cells in both the single-junction and even the tandem architectures lie beyond 850 nm. However, progress in low-cost, large-area, physically flexible solar cells has instead been made in organic and polymer materials possessing absorption onsets in the visible. Recent advances have been achieved in solution-cast infrared photovoltaics through the use of colloidal quantum dots. Here we report stable solution-processed photovoltaic devices having 3.6% power conversion efficiency in the infrared. The use of a strongly bound bidentate linker, benzenedithiol, ensures device stability over weeks. The devices reach external quantum efficiencies of 46% in the infrared and 70% across the visible. We investigate in detail the physical mechanisms underlying the operation of this class of device. In contrast with drift-dominated behavior in recent reports of PbS quantum dot photovoltaics, we find that diffusion of electrons and holes over hundreds of nanometers through our PbSe colloidal quantum dot solid is chiefly responsible for the high external quantum efficiencies obtained in this new class of devices.
2007-01-01
We have carried out continuous wave and time resolved photoluminescence experiments in self-assembled In(Ga)As quantum dots and quantum rings embedded in field effect structure devices. In both kinds of nanostructures, we find a noticeable increase of the exciton radiative lifetime with the external voltage bias that must be attributed to the field-induced polarizability of the confined electron hole pair. The interplay between the exciton radiative recombination and the electronic carrier tu...
Institute of Scientific and Technical Information of China (English)
He An-Min; Duan Su-Qing; Zhao Xian-Geng
2005-01-01
The effect of external noise, which is characterized by an Ornstein-Uhlenbeck process, on the dynamical localization of two coupling electrons in a quantum dot array under the action of an ac electric field is studied. A numerical solution of the stochastic equations is obtained by averaging over stochastic trajectories. The results show that the external noise may destroy the dynamical localization, but the anti-noise capacity of the system is stronger when the two electrons are localized at the ends of the quantum dot array.
Quantum enhanced estimation of optical detector efficiencies
Directory of Open Access Journals (Sweden)
Barbieri Marco
2016-01-01
Full Text Available Quantum mechanics establishes the ultimate limit to the scaling of the precision on any parameter, by identifying optimal probe states and measurements. While this paradigm is, at least in principle, adequate for the metrology of quantum channels involving the estimation of phase and loss parameters, we show that estimating the loss parameters associated with a quantum channel and a realistic quantum detector are fundamentally different. While Fock states are provably optimal for the former, we identify a crossover in the nature of the optimal probe state for estimating detector imperfections as a function of the loss parameter using Fisher information as a benchmark. We provide theoretical results for on-off and homodyne detectors, the most widely used detectors in quantum photonics technologies, when using Fock states and coherent states as probes.
Efficient quantum secure communication with a publicly known key
Institute of Scientific and Technical Information of China (English)
Li Chun-Yan; Li Xi-Han; Deng Fu-Guo; Zhou Hong-Yu
2008-01-01
This paper presents a simple way for an eavesdropper to eavesdrop freely the secret message in the experimental realization of quantum communication protocol proposed by Beige et al (2002 Acta Phys. Pol. A 101 357). Moreover, it introduces an efficient quantum secure communication protocol based on a publicly known key with decoy photons and two biased bases by modifying the original protocol. The total efficiency of this new protocol is double that of the original one. With a low noise quantum channel, this protocol can be used for transmitting a secret message. At present, this protocol is good for generating a private key efficiently.
Quantum Cost Efficient Reversible BCD Adder for Nanotechnology Based Systems
Islam, Md Saiful; Begum, Zerina
2011-01-01
Reversible logic allows low power dissipating circuit design and founds its application in cryptography, digital signal processing, quantum and optical information processing. This paper presents a novel quantum cost efficient reversible BCD adder for nanotechnology based systems using PFAG gate. It has been demonstrated that the proposed design offers less hardware complexity and requires minimum number of garbage outputs than the existing counterparts. The remarkable property of the proposed designs is that its quantum realization is given in NMR technology.
The Dirac-Moshinsky oscillator coupled to an external field and its connection to quantum optics
Torres, Juan Mauricio; Seligman, Thomas H
2010-01-01
The Dirac-Moshinsky oscillator is an elegant example of an exactly solvable quantum relativistic model that under certain circumstances can be mapped onto the Jaynes-Cummings model in quantum optics. In this work we show, how to do this in detail. Then we extend it by considering its coupling with an external (isospin) field and find the conditions that maintain solvability. We use this extended system to explore entanglement in relativistic systems and then identify its quantum optical analog: two different atoms interacting with an electromagnetic mode. We show different aspects of entanglement which gain relevance in this last system, which can be used to emulate the former.
The Dirac-Moshinsky oscillator coupled to an external field and its connection to quantum optics
Torres, Juan Mauricio; Sadurní, Emerson; Seligman, Thomas H.
2010-12-01
The Dirac-Moshinsky oscillator is an elegant example of an exactly solvable quantum relativistic model that under certain circumstances can be mapped onto the Jaynes-Cummings model in quantum optics. In this work we show, how to do this in detail. Then we extend it by considering its coupling with an external (isospin) field and find the conditions that maintain solvability. We use this extended system to explore entanglement in relativistic systems and then identify its quantum optical analog: two different atoms interacting with an electromagnetic mode. We show different aspects of entanglement which gain relevance in this last system, which can be used to emulate the former.
Highly efficient frequency conversion with bandwidth compression of quantum light
Allgaier, Markus; Ansari, Vahid; Sansoni, Linda; Eigner, Christof; Quiring, Viktor; Ricken, Raimund; Harder, Georg; Brecht, Benjamin; Silberhorn, Christine
2017-01-01
Hybrid quantum networks rely on efficient interfacing of dissimilar quantum nodes, as elements based on parametric downconversion sources, quantum dots, colour centres or atoms are fundamentally different in their frequencies and bandwidths. Although pulse manipulation has been demonstrated in very different systems, to date no interface exists that provides both an efficient bandwidth compression and a substantial frequency translation at the same time. Here we demonstrate an engineered sum-frequency-conversion process in lithium niobate that achieves both goals. We convert pure photons at telecom wavelengths to the visible range while compressing the bandwidth by a factor of 7.47 under preservation of non-classical photon-number statistics. We achieve internal conversion efficiencies of 61.5%, significantly outperforming spectral filtering for bandwidth compression. Our system thus makes the connection between previously incompatible quantum systems as a step towards usable quantum networks. PMID:28134242
Highly efficient frequency conversion with bandwidth compression of quantum light
Allgaier, Markus; Ansari, Vahid; Sansoni, Linda; Eigner, Christof; Quiring, Viktor; Ricken, Raimund; Harder, Georg; Brecht, Benjamin; Silberhorn, Christine
2017-01-01
Hybrid quantum networks rely on efficient interfacing of dissimilar quantum nodes, as elements based on parametric downconversion sources, quantum dots, colour centres or atoms are fundamentally different in their frequencies and bandwidths. Although pulse manipulation has been demonstrated in very different systems, to date no interface exists that provides both an efficient bandwidth compression and a substantial frequency translation at the same time. Here we demonstrate an engineered sum-frequency-conversion process in lithium niobate that achieves both goals. We convert pure photons at telecom wavelengths to the visible range while compressing the bandwidth by a factor of 7.47 under preservation of non-classical photon-number statistics. We achieve internal conversion efficiencies of 61.5%, significantly outperforming spectral filtering for bandwidth compression. Our system thus makes the connection between previously incompatible quantum systems as a step towards usable quantum networks.
Highly efficient frequency conversion with bandwidth compression of quantum light
Allgaier, Markus; Sansoni, Linda; Quiring, Viktor; Ricken, Raimund; Harder, Georg; Brecht, Benjamin; Silberhorn, Christine
2016-01-01
Hybrid quantum networks rely on efficient interfacing of dissimilar quantum nodes, since elements based on parametric down-conversion sources, quantum dots, color centres or atoms are fundamentally different in their frequencies and bandwidths. While pulse manipulation has been demonstrated in very different systems, to date no interface exists that provides both an efficient bandwidth compression and a substantial frequency translation at the same time. Here, we demonstrate an engineered sum-frequency-conversion process in Lithium Niobate that achieves both goals. We convert pure photons at telecom wavelengths to the visible range while compressing the bandwidth by a factor of 7.47 under preservation of non-classical photon-number statistics. We achieve internal conversion efficiencies of 75.5%, significantly outperforming spectral filtering for bandwidth compression. Our system thus makes the connection between previously incompatible quantum systems as a step towards usable quantum networks.
A Highly Efficient Hybrid GaAs Solar Cell Based on Colloidal-Quantum-Dot-Sensitization
Han, Hau-Vei; Lin, Chien-Chung; Tsai, Yu-Lin; Chen, Hsin-Chu; Chen, Kuo-Ju; Yeh, Yun-Ling; Lin, Wen-Yi; Kuo, Hao-Chung; Yu, Peichen
2014-07-01
This paper presents a hybrid design, featuring a traditional GaAs-based solar cell combined with various colloidal quantum dots. This hybrid design effectively boosts photon harvesting at long wavelengths while enhancing the collection of photogenerated carriers in the ultraviolet region. The merits of using highly efficient semiconductor solar cells and colloidal quantum dots were seamlessly combined to increase overall power conversion efficiency. Several photovoltaic parameters, including short-circuit current density, open circuit voltage, and external quantum efficiency, were measured and analyzed to investigate the performance of this hybrid device. Offering antireflective features at long wavelengths and luminescent downshifting for high-energy photons, the quantum dots effectively enhanced overall power conversion efficiency by as high as 24.65% compared with traditional GaAs-based devices. The evolution of weighted reflectance as a function of the dilution factor of QDs was investigated. Further analysis of the quantum efficiency response showed that the luminescent downshifting effect can be as much as 6.6% of the entire enhancement of photogenerated current.
Wide-Band, High-Quantum-Efficiency Photodetector
Jackson, Deborah; Wilson, Daniel; Stern, Jeffrey
2007-01-01
A design has been proposed for a photodetector that would exhibit a high quantum efficiency (as much as 90 percent) over a wide wavelength band, which would typically be centered at a wavelength of 1.55 m. This and similar photodetectors would afford a capability for detecting single photons - a capability that is needed for research in quantum optics as well as for the practical development of secure optical communication systems for distribution of quantum cryptographic keys. The proposed photodetector would be of the hot-electron, phonon-cooled, thin-film superconductor type. The superconducting film in this device would be a meandering strip of niobium nitride. In the proposed photodetector, the quantum efficiency would be increased through incorporation of optiA design has been proposed for a photodetector that would exhibit a high quantum efficiency (as much as 90 percent) over a wide wavelength band, which would typically be centered at a wavelength of 1.55 m. This and similar photodetectors would afford a capability for detecting single photons - a capability that is needed for research in quantum optics as well as for the practical development of secure optical communication systems for distribution of quantum cryptographic keys. The proposed photodetector would be of the hot-electron, phonon-cooled, thin-film superconductor type. The superconducting film in this device would be a meandering strip of niobium nitride. In the proposed photodetector, the quantum efficiency would be increased through incorporation of opti-
Directory of Open Access Journals (Sweden)
B. Maiti
2002-04-01
Full Text Available Abstract: Dynamical behavior of chemical reactivity indices like electronegativity, hardness, polarizability, electrophilicity and nucleophilicity indices is studied within a quantum fluid density functional framework for the interactions of a hydrogen atom in its ground electronic state (n = 1 and an excited electronic state (n = 20 with monochromatic and bichromatic laser pulses. Time dependent analogues of various electronic structure principles like the principles of electronegativity equalization, maximum hardness, minimum polarizability and maximum entropy have been found to be operative. Insights into the variation of intensities of the generated higher order harmonics on the color of the external laser field are obtained. The quantum signature of chaos in hydrogen atom has been studied using a quantum theory of motion and quantum fluid dynamics. A hydrogen atom in the electronic ground state (n = 1 and in an excited electronic state ( n = 20 behaves differently when placed in external oscillating monochromatic and bichromatic electric fields. Temporal evolutions of Shannon entropy, quantum Lyapunov exponent and Kolmogorov Ã¢Â€Â“ Sinai entropy defined in terms of the distance between two initially close Bohmian trajectories for these two cases show marked differences. It appears that a larger uncertainty product and a smaller hardness value signal a chaotic behavior.
Kisel, V V; Red'kov, V M
2010-01-01
With the use of the general covariant matrix 10-dimensional Petiau -- Duffin -- Kemmer formalism in cylindrical coordinates and tetrad there are constructed exact solutions of the quantum-mechanical equation for a particle with spin 1 in presence of an external homogeneous magnetic field. There are separated three linearly independent types of solutions; in each case the formula for energy levels has been found.
Ground-State Behavior of the Quantum Compass Model in an External Field
Institute of Scientific and Technical Information of China (English)
SUN Ke-Wei; CHEN Qing-Hu
2011-01-01
@@ Ground-state(GS)properties of the two-dimensional(2D)quantum compass model in an external field on a square 5×5 lattice are investigated by using the exact diagonalization(ED)method.We obtain the GS energy and evaluate quantities such as its correlation functions,nearest-neighbor entanglement and local order parameter.As the external field is presented,the first-order quantum phase point is absent and the system exhibits the behaviors of the second-order phase transition.%Ground-state (GS) properties of the two-dimensional (2D) quantum compass model in an external Geld on a square 5x5 lattice are investigated by using the exact diagonalization (ED) method. We obtain the GS energy and evaluate quantities such as its correlation functions, nearest-neighbor entanglement and local order parameter. As the external Geld is presented, the first-order quantum phase point is absent and the system exhibits the behaviors of the second-order phase transition.
Planar supersymmetric quantum mechanics of a charged particle in an external electromagnetic field
Energy Technology Data Exchange (ETDEWEB)
Paschoal, Ricardo C. [Centro Brasileiro de Pesquisas Fisicas, CBPF, Rua Dr. Xavier Sigaud 150, 22290-180 Rio de Janeiro, RJ (Brazil) and Servico Nacional de Aprendizagem Industrial, Centro de Tecnologia da Industria Quimica e Textil, SENAI/CETIQT, Rua Dr. Manoel Cotrim 195, 20961-040 Rio de Janeiro, RJ (Brazil)]. E-mail: paschoal@cbpf.br; Helayel-Neto, Jose A. [Centro Brasileiro de Pesquisas Fisicas, CBPF, Rua Dr. Xavier Sigaud 150, 22290-180 Rio de Janeiro, RJ (Brazil) and Grupo de Fisica Teorica Jose Leite Lopes, P.O. Box 91933, 25685-970 Petropolis, RJ (Brazil)]. E-mail: helayel@cbpf.br; Assis, Leonardo P.G. de [Centro Brasileiro de Pesquisas Fisicas, CBPF, Rua Dr. Xavier Sigaud 150, 22290-180 Rio de Janeiro, RJ (Brazil) and Grupo de Fisica Teorica Jose Leite Lopes, P.O. Box 91933, 25685-970 Petropolis, RJ (Brazil)]. E-mail: lpgassis@cbpf.br
2006-01-09
The supersymmetric quantum mechanics of a two-dimensional non-relativistic particle subject to external magnetic and electric fields is studied in a superfield formulation and with the typical non-minimal coupling of (2+1) dimensions. Both the N=1 and N=2 cases are contemplated and the introduction of the electric interaction is suitably analysed.
Locally covariant quantum field theory with external sources
Fewster, Christopher J
2014-01-01
We provide a detailed analysis of the classical and quantized theory of a multiplet of inhomogeneous Klein-Gordon fields, which couple to the spacetime metric and also to an external source term; thus the solutions form an affine space. Following the formulation of affine field theories in terms of presymplectic vector spaces as proposed in [Annales Henri Poincare 15, 171 (2014)], we determine the relative Cauchy evolution induced by metric as well as source term perturbations and compute the automorphism group of natural isomorphisms of the presymplectic vector space functor. Two pathological features of this formulation are revealed: the automorphism group contains elements that cannot be interpreted as global gauge transformations of the theory; moreover, the presymplectic formulation does not respect a natural requirement on composition of subsystems. We therefore propose a systematic strategy to improve the original description of affine field theories at the classical and quantized level, first passing ...
Efficient Measurement of Multiparticle Entanglement with Embedding Quantum Simulator.
Chen, Ming-Cheng; Wu, Dian; Su, Zu-En; Cai, Xin-Dong; Wang, Xi-Lin; Yang, Tao; Li, Li; Liu, Nai-Le; Lu, Chao-Yang; Pan, Jian-Wei
2016-02-19
The quantum measurement of entanglement is a demanding task in the field of quantum information. Here, we report the direct and scalable measurement of multiparticle entanglement with embedding photonic quantum simulators. In this embedding framework [R. Di Candia et al. Phys. Rev. Lett. 111, 240502 (2013)], the N-qubit entanglement, which does not associate with a physical observable directly, can be efficiently measured with only two (for even N) and six (for odd N) local measurement settings. Our experiment uses multiphoton quantum simulators to mimic dynamical concurrence and three-tangle entangled systems and to track their entanglement evolutions.
About the Origin of the Division between Internal and External Symmetries in Quantum Field Theory
Kober, Martin
2009-01-01
It is made the attempt to explain why there exists a division between internal symmetries referring to quantum numbers and external symmetries referring to space-time within the description of relativistic quantum field theories. It is hold the attitude that the symmetries of quantum theory are the origin of both sorts of symmetries in nature. Since all quantum states can be represented as a tensor product of two dimensional quantum objects, called ur objects, which can be interpreted as quantum bits of information, described by spinors reflecting already the symmetry properties of space-time, it seems to be possible to justify such an attitude. According to this, space-time symmetries can be considered as a consequence of a representation of quantum states by quantum bits. Internal symmetries are assumed to refer to relations of such fundamental objects, which are contained within the state of one single particle, with respect to each other. In this sense the existence of space-time symmetries, the existence...
Efficient quantum circuits for dense circulant and circulant like operators
Zhou, S. S.; Wang, J. B.
2017-05-01
Circulant matrices are an important family of operators, which have a wide range of applications in science and engineering-related fields. They are, in general, non-sparse and non-unitary. In this paper, we present efficient quantum circuits to implement circulant operators using fewer resources and with lower complexity than existing methods. Moreover, our quantum circuits can be readily extended to the implementation of Toeplitz, Hankel and block circulant matrices. Efficient quantum algorithms to implement the inverses and products of circulant operators are also provided, and an example application in solving the equation of motion for cyclic systems is discussed.
A fully efficient secure quantum cryptography protocol
Xiang Bin Wang
2001-01-01
Since Bennett and Brassard suggested their quantum key distribution protocol(BB84 protocol) in 1984, the subject has been extensively studied both theoretically and experimentally. The protocol allows two remote parties Alice and Bob to create and share a secret key using a quantum channel and public authenticated communications. The quantum key created in this way is in principle secure because eavesdroppers have no way to tap the quantum channel without disturb it. In the protocol, two level quantum bits are measured in two basis, $X$ and $Z$ randomly by Bob. So at least half of the measurement results will be discarded because Bob has a half probability taking the measurement in a wrong basis. On the other hand, the security is not the maximum in BB84 protocol. To increase the security, one may straightforwardly increase the number of basis used in the protocol. For example, six state protocol was proposed recently for two level system. However, in this way, it seems to be the case that the higher the secu...
Efficient Luminescence from Perovskite Quantum Dot Solids
Kim, Younghoon
2015-11-18
© 2015 American Chemical Society. Nanocrystals of CsPbX3 perovskites are promising materials for light-emitting optoelectronics because of their colloidal stability, optically tunable bandgap, bright photoluminescence, and excellent photoluminescence quantum yield. Despite their promise, nanocrystal-only films of CsPbX3 perovskites have not yet been fabricated; instead, highly insulating polymers have been relied upon to compensate for nanocrystals\\' unstable surfaces. We develop solution chemistry that enables single-step casting of perovskite nanocrystal films and overcomes problems in both perovskite quantum dot purification and film fabrication. Centrifugally cast films retain bright photoluminescence and achieve dense and homogeneous morphologies. The new materials offer a platform for optoelectronic applications of perovskite quantum dot solids.
Quantum transport efficiency and Fourier's law.
Manzano, Daniel; Tiersch, Markus; Asadian, Ali; Briegel, Hans J
2012-12-01
We analyze the steady-state energy transfer in a chain of coupled two-level systems connecting two thermal reservoirs. Through an analytic treatment we find that the energy current is independent of the system size, hence violating Fourier's law of heat conduction. The classical diffusive behavior in Fourier's law of heat conduction can be recovered by introducing decoherence to the quantum systems constituting the chain. We relate these results to recent discussions of energy transport in biological light-harvesting systems, and discuss the role of quantum coherence and entanglement.
Quantum transport efficiency and Fourier's law
Manzano, Daniel; Asadian, Ali; Briegel, Hans J
2011-01-01
We analyze the steady-state energy transfer in a chain of coupled two-level systems connecting two thermal reservoirs. Through an analytic treatment we find that the energy current is independent of the system size, hence violating Fourier's law of heat conduction. The classical diffusive behavior in Fourier's law of heat conduction can be recovered by introducing decoherence to the quantum systems constituting the chain. Implications of these results on energy transfer in biological light harvesting systems, and the role of quantum coherences and entanglement are discussed.
Commuting quantum circuits: efficient classical simulations versus hardness results
Ni, Xiaotong
2012-01-01
The study of quantum circuits composed of commuting gates is particularly useful to understand the delicate boundary between quantum and classical computation. Indeed, while being a restricted class, commuting circuits exhibit genuine quantum effects such as entanglement. In this paper we show that the computational power of commuting circuits exhibits a surprisingly rich structure. First we show that every 2-local commuting circuit acting on d-level systems and followed by single-qudit measurements can be efficiently simulated classically with high accuracy. In contrast, we prove that such strong simulations are hard for 3-local circuits. Using sampling methods we further show that all commuting circuits composed of exponentiated Pauli operators e^{i\\theta P} can be simulated efficiently classically when followed by single-qubit measurements. Finally, we show that commuting circuits can efficiently simulate certain non-commutative processes, related in particular to constant-depth quantum circuits. This give...
An efficient quantum secure direct communication scheme with authentication
Institute of Scientific and Technical Information of China (English)
Yang Yu-Guang; Wen Qiao-Yan; Zhu Fu-Chen
2007-01-01
In this paper an efficient quantum secure direct communication (QSDC) scheme with authentication is presented,which is based on quantum entanglement and polarized single photons. The present protocol uses Einstein-PodolskyRosen (EPR) pairs and polarized single photons in batches. A particle of the EPR pairs is retained in the sender's QSDC protocol. According to the shared information beforehand, these two kinds of quantum states are mixed and then transmitted via a quantum channel. The EPR pairs are used to transmit secret messages and the polarized single photons used for authentication and eavesdropping check. Consequently, because of the dual contributions of the polarized single photons, no classical information is needed. The intrinsic efficiency and total efficiency are both 1 in this scheme as almost all of the instances are useful and each EPR pair can be used to carry two bits of information.
DEFF Research Database (Denmark)
Johansen, Jeppe; Stobbe, Søren; Nikolaev, I.S.
2007-01-01
We have measured time-resolved spontaneous emission from quantum dots near a dielectric interface with known photonic local density of states. We thus experimentally determine the quantum efficiency and the dipole moment, important for quantum optics.......We have measured time-resolved spontaneous emission from quantum dots near a dielectric interface with known photonic local density of states. We thus experimentally determine the quantum efficiency and the dipole moment, important for quantum optics....
Quantum interferences reconstruction with low homodyne detection efficiency
Energy Technology Data Exchange (ETDEWEB)
Esposito, Martina; Randi, Francesco [Universita degli studi di Trieste, Dipartimento di Fisica, Trieste (Italy); Titimbo, Kelvin; Zimmermann, Klaus; Benatti, Fabio [Universita degli studi di Trieste, Dipartimento di Fisica, Trieste (Italy); Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, Trieste (Italy); Kourousias, Georgios; Curri, Alessio [Sincrotrone Trieste S.C.p.A., Trieste (Italy); Floreanini, Roberto [Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, Trieste (Italy); Parmigiani, Fulvio [Universita degli studi di Trieste, Dipartimento di Fisica, Trieste (Italy); Sincrotrone Trieste S.C.p.A., Trieste (Italy); University of Cologne, Institute of Physics II, Cologne (Germany); Fausti, Daniele [Universita degli studi di Trieste, Dipartimento di Fisica, Trieste (Italy); Sincrotrone Trieste S.C.p.A., Trieste (Italy)
2016-12-15
Optical homodyne tomography consists in reconstructing the quantum state of an optical field from repeated measurements of its amplitude at different field phases (homodyne data). The experimental noise, which unavoidably affects the homodyne data, leads to a detection efficiency η<1. The problem of reconstructing quantum states from noisy homodyne data sets prompted an intense scientific debate about the presence or absence of a lower homodyne efficiency bound (η>0.5) below which quantum features, like quantum interferences, cannot be retrieved. Here, by numerical experiments, we demonstrate that quantum interferences can be effectively reconstructed also for low homodyne detection efficiency. In particular, we address the challenging case of a Schroedinger cat state and test the minimax and adaptive Wigner function reconstruction technique by processing homodyne data distributed according to the chosen state but with an efficiency η>0.5. By numerically reproducing the Schroedinger's cat interference pattern, we give evidence that quantum state reconstruction is actually possible in these conditions, and provide a guideline for handling optical tomography based on homodyne data collected by low efficiency detectors. (orig.)
Quantum dynamics of tight-binding networks coherently controlled by external fields
Institute of Scientific and Technical Information of China (English)
YANG Shuo; SONG Zhi; SUN Chang-pu
2007-01-01
With some reviews on the investigations on the schemes for quantum state transfer based on spin systems,we discuss the quantum dynamics of magnetically-controlled networks for Bloch electrons. The networks are constructed by connecting several tight-binding chains with uniform nearest-neighbor hopping integrals. The external magnetic field and the connecting hopping integrals can be used to control the intrinsic properties of the networks. For several typical networks, rigorous results are shown for some specific values of external magnetic field and the connecting hopping integrals: a complicated network can be reduced into a virtual network, which is a direct sum of some independent chains with uniform nearest-neighbor hopping integrals. These reductions are due to the fermionic statistics and the Aharonov-Bohm effects. In application, we study the quantum dynamics of wave packet motion of Bloch electrons in such networks. For various geometrical configurations, these networks can function as some optical devices,such as beam splitters, switches and interferometers. When the Bloch electrons as Gaussian wave packets input these devices, various quantum coherence phenomena can be observed, e.g., the perfect quantum state transfer without reflection in a Y-shaped beam, the multi-mode entanglers of electron wave by star-shaped network, magnetically controlled switches, and Bloch electron interferometer with the lattice Aharonov-Bohm effects. With these quantum coherent features, the networks are expected to be used as quantum information processors for the fermion system based on the possible engineered solid state systems, such as the array of quantum dots that can be implemented experimentally.
Popescu-Rohrlich correlations imply efficient instantaneous nonlocal quantum computation
Broadbent, Anne
2016-08-01
In instantaneous nonlocal quantum computation, two parties cooperate in order to perform a quantum computation on their joint inputs, while being restricted to a single round of simultaneous communication. Previous results showed that instantaneous nonlocal quantum computation is possible, at the cost of an exponential amount of prior shared entanglement (in the size of the input). Here, we show that a linear amount of entanglement suffices, (in the size of the computation), as long as the parties share nonlocal correlations as given by the Popescu-Rohrlich box. This means that communication is not required for efficient instantaneous nonlocal quantum computation. Exploiting the well-known relation to position-based cryptography, our result also implies the impossibility of secure position-based cryptography against adversaries with nonsignaling correlations. Furthermore, our construction establishes a quantum analog of the classical communication complexity collapse under nonsignaling correlations.
Miller, Owen D; Kurtz, Sarah R
2012-01-01
Absorbed sunlight in a solar cell produces electrons and holes. But, at the open circuit condition, the carriers have no place to go. They build up in density and, ideally, they emit external fluorescence that exactly balances the incoming sunlight. Any additional non-radiative recombination impairs the carrier density buildup, limiting the open-circuit voltage. At open-circuit, efficient external fluorescence is an indicator of low internal optical losses. Thus efficient external fluorescence is, counter-intuitively, a necessity for approaching the Shockley-Queisser efficiency limit. A great Solar Cell also needs to be a great Light Emitting Diode. Owing to the narrow escape cone for light, efficient external emission requires repeated attempts, and demands an internal luminescence efficiency >>90%.
Efficient arbitrated quantum signature and its proof of security
Li, Qin; Li, Chengqing; Long, Dongyang; Chan, Wai Hong; Wang, Changji
2013-07-01
In this paper, an efficient arbitrated quantum signature scheme is proposed by combining quantum cryptographic techniques and some ideas in classical cryptography. In the presented scheme, the signatory and the receiver can share a long-term secret key with the arbitrator by utilizing the key together with a random number. While in previous quantum signature schemes, the key shared between the signatory and the arbitrator or between the receiver and the arbitrator could be used only once, and thus each time when a signatory needs to sign, the signatory and the receiver have to obtain a new key shared with the arbitrator through a quantum key distribution protocol. Detailed theoretical analysis shows that the proposed scheme is efficient and provably secure.
Research on quantum efficiency of GaN wire photocathode
Xia, Sihao; Liu, Lei; Diao, Yu; Kong, Yike
2017-02-01
On the basis of three-dimensional continuity equation in semiconductors and finite difference method, the carrier concentration and the quantum efficiency of GaN wire photocathode as a function of incident photon energy are achieved. Results show that the quantum efficiency of the wire photocathode is largely enhanced compared with the conventional planar photocathode. The superiority of the wire photocathode is reflected in its structure with surrounding surfaces. The quantum efficiency of the wire photocathode largely depends on the wire width, surface reflectivity, surface escape probability and incident angle of light. The back interface recombination rate, however, has little influences on the quantum efficiency of the wire photocathode. The simulation results suggest that the optimal width for photoemission is 150-200 nm. Besides, the quantum efficiency increases and decreases linearly with increasing surface escape probability and surface reflectivity, respectively. With increasing ratio of wire spacing to wire height, the optimal incident angle of light is reduced. These simulations are expected to guide the preparation of a better performing GaN wire photocathode.
Efficient Quantum Private Communication Based on Dynamic Control Code Sequence
Cao, Zheng-Wen; Feng, Xiao-Yi; Peng, Jin-Ye; Zeng, Gui-Hua; Qi, Jin
2016-12-01
Based on chaos and quantum properties, we propose a quantum private communication scheme with dynamic control code sequence. The initial sequence is obtained via chaotic systems, and the control code sequence is derived by grouping, XOR and extracting. A shift cycle algorithm is designed to enable the dynamic change of control code sequence. Analysis shows that transmission efficiency could reach 100 % with high dynamics and security.
Statistical estimation of the efficiency of quantum state tomography protocols.
Bogdanov, Yu I; Brida, G; Genovese, M; Kulik, S P; Moreva, E V; Shurupov, A P
2010-07-02
A novel operational method for estimating the efficiency of quantum state tomography protocols is suggested. It is based on a priori estimation of the quality of an arbitrary protocol by means of universal asymptotic fidelity distribution and condition number, which takes minimal value for better protocol. We prove the adequacy of the method both with numerical modeling and through the experimental realization of several practically important protocols of quantum state tomography.
Efficient method for transport simulations in quantum cascade lasers
Directory of Open Access Journals (Sweden)
Maczka Mariusz
2017-01-01
Full Text Available An efficient method for simulating quantum transport in quantum cascade lasers is presented. The calculations are performed within a simple approximation inspired by Büttiker probes and based on a finite model for semiconductor superlattices. The formalism of non-equilibrium Green’s functions is applied to determine the selected transport parameters in a typical structure of a terahertz laser. Results were compared with those obtained for a infinite model as well as other methods described in literature.
Efficient method for transport simulations in quantum cascade lasers
Maczka, Mariusz; Pawlowski, Stanislaw
2016-12-01
An efficient method for simulating quantum transport in quantum cascade lasers is presented. The calculations are performed within a simple approximation inspired by Büttiker probes and based on a finite model for semiconductor superlattices. The formalism of non-equilibrium Green's functions is applied to determine the selected transport parameters in a typical structure of a terahertz laser. Results were compared with those obtained for a infinite model as well as other methods described in literature.
Efficient Quantum Private Communication Based on Dynamic Control Code Sequence
Cao, Zheng-Wen; Feng, Xiao-Yi; Peng, Jin-Ye; Zeng, Gui-Hua; Qi, Jin
2017-04-01
Based on chaos and quantum properties, we propose a quantum private communication scheme with dynamic control code sequence. The initial sequence is obtained via chaotic systems, and the control code sequence is derived by grouping, XOR and extracting. A shift cycle algorithm is designed to enable the dynamic change of control code sequence. Analysis shows that transmission efficiency could reach 100 % with high dynamics and security.
1981-01-01
An analytical comparison of the efficiency of solar thermal collector arrays with and without external manifolds is reported. A FORTRAN computer program was written for the computation of the thermal performance of solar thermal collector arrays with and without external manifolds. Arrays constructed from two example solar thermal collectors are computated. Typical external manifold sizes and thermal insulations are presented graphically and are compared with the thermal performance of the collector alone.
Certain Properties of a Quantum Information Network Driven by External Fields
Institute of Scientific and Technical Information of China (English)
BI Qiao; FANG Jin-Qing; ZOU Qin
2006-01-01
@@ A quantum information network with the structure of the Gaussian channel is proposed. The network topological property and information characteristic is studied. Under the catastrophic and exponential external field driving,the degree distribution has the spatial and temporal characteristics, and the positive or negative power index appears, which can influence the assortativity coefficient. This is possibly helpful to open a way to using the different type of driving to introduce the expected properties for the network.
Nano-patterned superconducting surface for high quantum efficiency cathode
Hannon, Fay; Musumeci, Pietro
2017-03-07
A method for providing a superconducting surface on a laser-driven niobium cathode in order to increase the effective quantum efficiency. The enhanced surface increases the effective quantum efficiency by improving the laser absorption of the surface and enhancing the local electric field. The surface preparation method makes feasible the construction of superconducting radio frequency injectors with niobium as the photocathode. An array of nano-structures are provided on a flat surface of niobium. The nano-structures are dimensionally tailored to interact with a laser of specific wavelength to thereby increase the electron yield of the surface.
Nano-patterned superconducting surface for high quantum efficiency cathode
Energy Technology Data Exchange (ETDEWEB)
Hannon, Fay; Musumeci, Pietro
2017-03-07
A method for providing a superconducting surface on a laser-driven niobium cathode in order to increase the effective quantum efficiency. The enhanced surface increases the effective quantum efficiency by improving the laser absorption of the surface and enhancing the local electric field. The surface preparation method makes feasible the construction of superconducting radio frequency injectors with niobium as the photocathode. An array of nano-structures are provided on a flat surface of niobium. The nano-structures are dimensionally tailored to interact with a laser of specific wavelength to thereby increase the electron yield of the surface.
External driving synchronization in a superconducting quantum interference device based oscillator
Zhao, Jie; Zhao, Peng; Yu, Haifeng; Yu, Yang
2016-11-01
We propose an external driving, self-sustained oscillator based on superconducting resonators. The dynamics of the self-sustained oscillator can be described by a Duffing-van der Pol like equation. Under external driving, the self-sustained oscillator presents synchronization phenomena. We analytically and numerically investigate the synchronization regions, and the results show that the synchronization bandwidth can be quickly adjusted in situ by the external weak magnetic field in sub-nano seconds. Moreover, the system can re-stabilize in about 10 ns with a certain sudden change of driving frequency or the critical current of the superconducting quantum interference device (SQUID). These advantages allow the potential applications of self-sustained oscillators in timing reference, microwave communication and electromagnetic sensing.
Zahn, Jochen
2015-01-01
In the framework of quantum electrodynamics (QED) in external potentials, we introduce a method to compute the time-dependence of the expectation value of the current density for time-dependent homogeneous external electric fields. We apply it to the so-called Sauter pulse. For late times, our results agree with the asymptotic value due to electron-positron pair production. For sub-critical peak field strengths, or results agree very well with the general expression derived by Serber for the linearization in the external field. In particular, the expectation value of the current density at intermediate times can be much greater than at asymptotic times. We comment on consequences of these findings for recent proposals to test the Schwinger effect with high intensity lasers using processes at intermediate times.
Materials Bound by Non-Chemical Forces: External Fields and the Quantum Vacuum
Swain, John; Srivastava, Yogendra
2014-01-01
We discuss materials which owe their stability to external fields. These include: 1) external electric or magnetic fields, and 2) quantum vacuum fluctuations in these fields induced by suitable boundary conditions (the Casimir effect). Instances of the first case include the floating water bridge and ferrofluids in magnetic fields. An example of the second case is taken from biology where the Casimir effect provides an explanation of the formation of stacked aggregations or "rouleaux" by negatively charged red blood cells. We show how the interplay between electrical and Casimir forces can be used to drive self-assembly of nano-structured materials, and could be generalized both as a probe of Casimir forces and as a means of manufacturing nanoscale structures. Interestingly, all the cases discussed involve the generation of the somewhat exotic negative pressures. We note that very little is known about the phase diagrams of most materials in the presence of external fields other than those represented by the ...
Efficient charge carrier injection into sub-250 nm AlGaN multiple quantum well light emitting diodes
Energy Technology Data Exchange (ETDEWEB)
Mehnke, Frank, E-mail: mehnke@physik.tu-berlin.de; Kuhn, Christian; Guttmann, Martin; Reich, Christoph; Kolbe, Tim; Rass, Jens; Wernicke, Tim [Technische Universität Berlin, Institut für Festkörperphysik, Hardenbergstr. 36, EW 6-1, 10623 Berlin (Germany); Kueller, Viola; Knauer, Arne; Lapeyrade, Mickael; Einfeldt, Sven; Weyers, Markus [Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin (Germany); Kneissl, Michael [Technische Universität Berlin, Institut für Festkörperphysik, Hardenbergstr. 36, EW 6-1, 10623 Berlin (Germany); Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin (Germany)
2014-08-04
The design and Mg-doping profile of AlN/Al{sub 0.7}Ga{sub 0.3}N electron blocking heterostructures (EBH) for AlGaN multiple quantum well (MQW) light emitting diodes (LEDs) emitting below 250 nm was investigated. By inserting an AlN electron blocking layer (EBL) into the EBH, we were able to increase the quantum well emission power and significantly reduce long wavelength parasitic luminescence. Furthermore, electron leakage was suppressed by optimizing the thickness of the AlN EBL while still maintaining sufficient hole injection. Ultraviolet (UV)-C LEDs with very low parasitic luminescence (7% of total emission power) and external quantum efficiencies of 0.19% at 246 nm have been realized. This concept was applied to AlGaN MQW LEDs emitting between 235 nm and 263 nm with external quantum efficiencies ranging from 0.002% to 0.93%. After processing, we were able to demonstrate an UV-C LED emitting at 234 nm with 14.5 μW integrated optical output power and an external quantum efficiency of 0.012% at 18.2 A/cm{sup 2}.
Pure sources and efficient detectors for optical quantum information processing
Zielnicki, Kevin
Over the last sixty years, classical information theory has revolutionized the understanding of the nature of information, and how it can be quantified and manipulated. Quantum information processing extends these lessons to quantum systems, where the properties of intrinsic uncertainty and entanglement fundamentally defy classical explanation. This growing field has many potential applications, including computing, cryptography, communication, and metrology. As inherently mobile quantum particles, photons are likely to play an important role in any mature large-scale quantum information processing system. However, the available methods for producing and detecting complex multi-photon states place practical limits on the feasibility of sophisticated optical quantum information processing experiments. In a typical quantum information protocol, a source first produces an interesting or useful quantum state (or set of states), perhaps involving superposition or entanglement. Then, some manipulations are performed on this state, perhaps involving quantum logic gates which further manipulate or entangle the intial state. Finally, the state must be detected, obtaining some desired measurement result, e.g., for secure communication or computationally efficient factoring. The work presented here concerns the first and last stages of this process as they relate to photons: sources and detectors. Our work on sources is based on the need for optimized non-classical states of light delivered at high rates, particularly of single photons in a pure quantum state. We seek to better understand the properties of spontaneous parameteric downconversion (SPDC) sources of photon pairs, and in doing so, produce such an optimized source. We report an SPDC source which produces pure heralded single photons with little or no spectral filtering, allowing a significant rate enhancement. Our work on detectors is based on the need to reliably measure single-photon states. We have focused on
Fidelity decay as an efficient indicator of quantum chaos.
Emerson, Joseph; Weinstein, Yaakov S; Lloyd, Seth; Cory, D G
2002-12-31
We demonstrate that a system's rate of fidelity decay under repeated perturbations may be measured efficiently on a quantum information processor, and analyze the conditions under which this indicator is a reliable probe of quantum chaos. The type and rate of the decay are not dependent on the eigenvalue statistics of the unperturbed system, but depend on the system's eigenvector statistics in the eigenbasis of the perturbation. For random eigenvector statistics, the decay is exponential with a rate fixed by the variance of the perturbation's energy spectrum. Hence, even classically regular models can exhibit an exponential fidelity decay under generic quantum perturbations. These results clarify which perturbations can distinguish classically regular and chaotic quantum systems.
An efficient quantum search engine on unsorted database
Lu, Songfeng; Zhang, Yingyu; Liu, Fang
2013-10-01
We consider the problem of finding one or more desired items out of an unsorted database. Patel has shown that if the database permits quantum queries, then mere digitization is sufficient for efficient search for one desired item. The algorithm, called factorized quantum search algorithm, presented by him can locate the desired item in an unsorted database using O() queries to factorized oracles. But the algorithm requires that all the attribute values must be distinct from each other. In this paper, we discuss how to make a database satisfy the requirements, and present a quantum search engine based on the algorithm. Our goal is achieved by introducing auxiliary files for the attribute values that are not distinct, and converting every complex query request into a sequence of calls to factorized quantum search algorithm. The query complexity of our algorithm is O() for most cases.
Ramajo, Julián; Cordero, José Manuel; Márquez, Miguel Ángel
2017-10-01
This paper analyses region-level technical efficiency in nine European countries over the 1995-2007 period. We propose the application of a nonparametric conditional frontier approach to account for the presence of heterogeneous conditions in the form of geographical externalities. Such environmental factors are beyond the control of regional authorities, but may affect the production function. Therefore, they need to be considered in the frontier estimation. Specifically, a spatial autoregressive term is included as an external conditioning factor in a robust order- m model. Thus we can test the hypothesis of non-separability (the external factor impacts both the input-output space and the distribution of efficiencies), demonstrating the existence of significant global interregional spillovers into the production process. Our findings show that geographical externalities affect both the frontier level and the probability of being more or less efficient. Specifically, the results support the fact that the spatial lag variable has an inverted U-shaped non-linear impact on the performance of regions. This finding can be interpreted as a differential effect of interregional spillovers depending on the size of the neighboring economies: positive externalities for small values, possibly related to agglomeration economies, and negative externalities for high values, indicating the possibility of production congestion. Additionally, evidence of the existence of a strong geographic pattern of European regional efficiency is reported and the levels of technical efficiency are acknowledged to have converged during the period under analysis.
Energy Technology Data Exchange (ETDEWEB)
Roura, Albert [Los Alamos National Laboratory; Fleming, C H [UNIV OF MARYLAND; Hu, B L [UNIV OF MARYLAND
2008-01-01
We revisit the model of a system made up of a Brownian quantum oscillator linearly coupled to an environment made up of many quantum oscillators at finite temperature. We show that the HPZ master equation for the reduced density matrix derived earlier [B.L. Hu, J.P. Paz, Y. Zhang, Phys. Rev. D 45, 2843 (1992)] has incorrectly specified coefficients for the case of nonlocal dissipation. We rederive the QBM master equation, correctly specifying all coefficients, and determine the position uncertainty to be free of excessive cutoff sensitivity. Our coefficients and solutions are reduced entirely to contour integration for analytic spectra at arbitrary temperature, coupling strength, and cut-off. As an illustration we calculate the master equation coefficients and solve the master equation for ohmic coupling (with finite cutoff) and example supra-ohmic and sub-ohmic spectral densities. We determine the effect of an external force on the quantum oscillator and also show that our representation of the master equation and solutions naturally extends to a system of multiple oscillators bilinearly coupled to themselves and the bath in arbitrary fashion. This produces a formula for investigating the standard quantum limit which is central to addressing many theoretical issues in macroscopic quantum phenomena and experimental concerns related to low temperature precision measurements. We find that in a dissipative environment, all initial states settle down to a Gaussian density matrix whose covariance is determined by the thermal reservoir and whose mean is determined by the external force. We specify the thermal covariance for the spectral densities we explore.
Efficient Quantum State Estimation with Over-complete Tomography
Zhang, Chi; Xiang, Guo-Yong; Zhang, Yong-Sheng; Li, Chuan-Feng; Guo, Guang-Can
2011-01-01
It is widely accepted that the selection of measurement bases can affect the efficiency of quantum state estimation methods, precision of estimating an unknown state can be improved significantly by simply introduce a set of symmetrical measurement bases. Here we compare the efficiencies of estimations with different numbers of measurement bases by numerical simulation and experiment in optical system. The advantages of using a complete set of symmetrical measurement bases are illustrated mor...
Report of high quantum efficiency photocathode at Milano
Energy Technology Data Exchange (ETDEWEB)
Michelato, P. (INFN and University of Milano, Lab. LASA, Via F.lli Cervi 201, 2009, Segrate (Georgia))
1992-07-01
R D activity on high quantum efficiency alkali antimonide photocathode is in progress at Milano, in the context of the ARES program. Inside a preliminary preparation chamber, Cs[sub 3]Sb layers with qunatum efficiency up to 9% (at [lambda]=543.5 nm) and lifetime of some days has been recently produced on copper, stainless steel and niobium, using a reproducible deposition procedure adapted to the material of the different substrata.
High quantum efficiency GaP avalanche photodiodes.
McIntosh, Dion; Zhou, Qiugui; Chen, Yaojia; Campbell, Joe C
2011-09-26
Gallium Phosphide (GaP) reach-through avalanche photodiodes (APDs) are reported. The APDs exhibited dark current less than a pico-ampere at unity gain. A quantum efficiency of 70% was achieved with a recessed window structure; this is almost two times higher than previous work. © 2011 Optical Society of America
Efficient wave-function matching approach for quantum transport calculations
DEFF Research Database (Denmark)
Sørensen, Hans Henrik Brandenborg; Hansen, Per Christian; Petersen, Dan Erik;
2009-01-01
The wave-function matching (WFM) technique has recently been developed for the calculation of electronic transport in quantum two-probe systems. In terms of efficiency it is comparable to the widely used Green's function approach. The WFM formalism presented so far requires the evaluation of all ...
Modeling the irradiance dependency of the quantum efficiency of potosynthesis
Silsbe, G.M.; Kromkamp, J.C.
2012-01-01
Measures of the quantum efficiency of photosynthesis (phi(PSII)) across an irradiance (E) gradient are an increasingly common physiological assay and alternative to traditional photosynthetic-irradiance (PE) assays. Routinely, the analysis and interpretation of these data are analogous to PE measure
Internal quantum efficiency and tunable colour temperature in monolithic white InGaN/GaN LED
Titkov, Ilya E.; Yadav, Amit; Zerova, Vera L.; Zulonas, Modestas; Tsatsulnikov, Andrey F.; Lundin, Wsevolod V.; Sakharov, Alexey V.; Rafailov, Edik U.
2014-03-01
Internal Quantum Efficiency (IQE) of two-colour monolithic white light emitting diode (LED) was measured by temperature dependant electro-luminescence (TDEL) and analysed with modified rate equation based on ABC model. External, internal and injection efficiencies of blue and green quantum wells were analysed separately. Monolithic white LED contained one green InGaN QW and two blue QWs being separated by GaN barrier. This paper reports also the tunable behaviour of correlated colour temperature (CCT) in pulsed operation mode and effect of self-heating on device performance.
Quantum efficiency and oscillator strength of site-controlled InAs quantum dots
DEFF Research Database (Denmark)
Albert, F.; Stobbe, Søren; Schneider, C.
2010-01-01
We report on time-resolved photoluminescence spectroscopy to determine the oscillator strength (OS) and the quantum efficiency (QE) of site-controlled InAs quantum dots nucleating on patterned nanoholes. These two quantities are determined by measurements on site-controlled quantum dot (SCQD......) samples with varying thickness of the capping layer. We determine radiative and nonradiative decay rates, from which we calculate an OS of 10.1+/-2.6 and an encouragingly high QE of (47+/-14)% for the SCQDs. The nonideal QE is attributed to nonradiative recombination at the etched nanohole interface...
Quantum entanglement and criticality of the antiferromagnetic Heisenberg model in an external field.
Liu, Guang-Hua; Li, Ruo-Yan; Tian, Guang-Shan
2012-06-27
By Lanczos exact diagonalization and the infinite time-evolving block decimation (iTEBD) technique, the two-site entanglement as well as the bipartite entanglement, the ground state energy, the nearest-neighbor correlations, and the magnetization in the antiferromagnetic Heisenberg (AFH) model under an external field are investigated. With increasing external field, the small size system shows some distinct upward magnetization stairsteps, accompanied synchronously with some downward two-site entanglement stairsteps. In the thermodynamic limit, the two-site entanglement, as well as the bipartite entanglement, the ground state energy, the nearest-neighbor correlations, and the magnetization are calculated, and the critical magnetic field h(c) = 2.0 is determined exactly. Our numerical results show that the quantum entanglement is sensitive to the subtle changing of the ground state, and can be used to describe the magnetization and quantum phase transition. Based on the discontinuous behavior of the first-order derivative of the entanglement entropy and fidelity per site, we think that the quantum phase transition in this model should belong to the second-order category. Furthermore, in the magnon existence region (h entanglement which can be described by a free bosonic field theory is observed, and the central charge c is determined to be 1.
High Quantum Efficiency OLED Lighting Systems
Energy Technology Data Exchange (ETDEWEB)
Shiang, Joseph [General Electric (GE) Global Research, Fairfield, CT (United States)
2011-09-30
The overall goal of the program was to apply improvements in light outcoupling technology to a practical large area plastic luminaire, and thus enable the product vision of an extremely thin form factor high efficiency large area light source. The target substrate was plastic and the baseline device was operating at 35 LPW at the start of the program. The target LPW of the program was a >2x improvement in the LPW efficacy and the overall amount of light to be delivered was relatively high 900 lumens. Despite the extremely difficult challenges associated with scaling up a wet solution process on plastic substrates, the program was able to make substantial progress. A small molecule wet solution process was successfully implemented on plastic substrates with almost no loss in efficiency in transitioning from the laboratory scale glass to large area plastic substrates. By transitioning to a small molecule based process, the LPW entitlement increased from 35 LPW to 60 LPW. A further 10% improvement in outcoupling efficiency was demonstrated via the use of a highly reflecting cathode, which reduced absorptive loss in the OLED device. The calculated potential improvement in some cases is even larger, ~30%, and thus there is considerable room for optimism in improving the net light coupling efficacy, provided absorptive loss mechanisms are eliminated. Further improvements are possible if scattering schemes such as the silver nanowire based hard coat structure are fully developed. The wet coating processes were successfully scaled to large area plastic substrate and resulted in the construction of a 900 lumens luminaire device.
High efficiency cholesteric liquid crystal lasers with an external stable resonator.
Shirvani-Mahdavi, Hamidreza; Fardad, Shima; Mohajerani, Ezeddin; Wu, Shin-Tson
2010-06-21
An amplified cholesteric liquid crystal (CLC) laser performance is demonstrated by utilizing a binary-dye mixture (with 62 wt% DCM and 38 wt% PM597) as the active medium and an external stable resonator. The measured results show that the laser efficiency is enhanced as compared to the highest efficiency of each individual dye. Furthermore, using such an active CLC in an external stable resonator leads to a approximately 92X improved efficiency over the single CLC laser. In this instance, the binary-dye doped CLC simultaneously functions as laser oscillator and amplifier.
Efficiency, Power and Period of a model quantum heat engine working in a finite time
Bekele, Mulugeta; Dima, Tolasa A.; Alemye, Mekuannent; Chegeno, Warga
We take a spin-half quantum particle undergoing Carnot type cyclic process in a finite time assisted by two heat reservoirs and an external magnetic field. We find that the power of the heat engine is maximum at a particular period of the cyclic process and efficiency at the maximum power is at least half of the Carnot efficiency. We further apply the Omega-criterion for a figure of merit representing a compromise between useful power and lost power determining the corresponding efficiency for the optimization criterion to be at least three fourth of the Carnot efficiency. The authers are thankful to the International Science programme, IPS, Uppsala, Sweden for their support to our research lab.
An Efficient Quantum Somewhat Homomorphic Symmetric Searchable Encryption
Sun, Xiaoqiang; Wang, Ting; Sun, Zhiwei; Wang, Ping; Yu, Jianping; Xie, Weixin
2017-01-01
In 2009, Gentry first introduced an ideal lattices fully homomorphic encryption (FHE) scheme. Later, based on the approximate greatest common divisor problem, learning with errors problem or learning with errors over rings problem, FHE has developed rapidly, along with the low efficiency and computational security. Combined with quantum mechanics, Liang proposed a symmetric quantum somewhat homomorphic encryption (QSHE) scheme based on quantum one-time pad, which is unconditional security. And it was converted to a quantum fully homomorphic encryption scheme, whose evaluation algorithm is based on the secret key. Compared with Liang's QSHE scheme, we propose a more efficient QSHE scheme for classical input states with perfect security, which is used to encrypt the classical message, and the secret key is not required in the evaluation algorithm. Furthermore, an efficient symmetric searchable encryption (SSE) scheme is constructed based on our QSHE scheme. SSE is important in the cloud storage, which allows users to offload search queries to the untrusted cloud. Then the cloud is responsible for returning encrypted files that match search queries (also encrypted), which protects users' privacy.
An Efficient Quantum Somewhat Homomorphic Symmetric Searchable Encryption
Sun, Xiaoqiang; Wang, Ting; Sun, Zhiwei; Wang, Ping; Yu, Jianping; Xie, Weixin
2017-04-01
In 2009, Gentry first introduced an ideal lattices fully homomorphic encryption (FHE) scheme. Later, based on the approximate greatest common divisor problem, learning with errors problem or learning with errors over rings problem, FHE has developed rapidly, along with the low efficiency and computational security. Combined with quantum mechanics, Liang proposed a symmetric quantum somewhat homomorphic encryption (QSHE) scheme based on quantum one-time pad, which is unconditional security. And it was converted to a quantum fully homomorphic encryption scheme, whose evaluation algorithm is based on the secret key. Compared with Liang's QSHE scheme, we propose a more efficient QSHE scheme for classical input states with perfect security, which is used to encrypt the classical message, and the secret key is not required in the evaluation algorithm. Furthermore, an efficient symmetric searchable encryption (SSE) scheme is constructed based on our QSHE scheme. SSE is important in the cloud storage, which allows users to offload search queries to the untrusted cloud. Then the cloud is responsible for returning encrypted files that match search queries (also encrypted), which protects users' privacy.
Efficient quantum algorithm for computing n-time correlation functions.
Pedernales, J S; Di Candia, R; Egusquiza, I L; Casanova, J; Solano, E
2014-07-11
We propose a method for computing n-time correlation functions of arbitrary spinorial, fermionic, and bosonic operators, consisting of an efficient quantum algorithm that encodes these correlations in an initially added ancillary qubit for probe and control tasks. For spinorial and fermionic systems, the reconstruction of arbitrary n-time correlation functions requires the measurement of two ancilla observables, while for bosonic variables time derivatives of the same observables are needed. Finally, we provide examples applicable to different quantum platforms in the frame of the linear response theory.
A hybrid superconducting quantum dot acting as an efficient charge and spin Seebeck diode
Hwang, Sun-Yong; Sánchez, David; López, Rosa
2016-09-01
We propose a highly efficient thermoelectric diode device built from the coupling of a quantum dot with a normal or ferromagnetic electrode and a superconducting reservoir. The current shows a strongly nonlinear behavior in the forward direction (positive thermal gradients) while it almost vanishes in the backward direction (negative thermal gradients). Our discussion is supported by a gauge-invariant current-conserving transport theory accounting for electron-electron interactions inside the dot. We find that the diode behavior is greatly tuned with external gate potentials, Zeeman splittings or lead magnetizations. Our results are thus relevant for the search of novel thermoelectric devices with enhanced functionalities.
Zhang, Wenzhi; Jin, Jiangjiang; Huang, Zhi; Zhuang, Shaoqing; Wang, Lei
2016-07-01
Thermally activated delayed fluorescence (TADF) mechanism is a significant method that enables the harvesting of both triplet and singlet excitons for emission. However, up to now most efforts have been devoted to dealing with the relation between singlet-triplet splitting (ΔEST) and fluorescence efficiency, while the significance of spin-orbit coupling (SOC) is usually ignored. In this contribution, a new method is developed to realize high-efficiency TADF-based devices through simple device-structure optimizations. By inserting an ultrathin external heavy-atom (EHA) perturber layer in a desired manner, it provides useful means of accelerating the T1 → S1 reverse intersystem crossing (RISC) in TADF molecules without affecting the corresponding S1 → T1 process heavily. Furthermore, this strategy also promotes the utilization of host triplets through Förster mechanism during host → guest energy transfer (ET) processes, which helps to get rid of the solely dependence upon Dexter mechanism. Based on this strategy, we have successfully raised the external quantum efficiency (EQE) in 4CzPN-based devices by nearly 38% in comparison to control devices. These findings provide keen insights into the role of EHA played in TADF-based devices, offering valuable guidelines for utilizing certain TADF dyes which possess high radiative transition rate but relatively inefficient RISC.
Active mode locking of quantum cascade lasers operating in external ring cavity
Revin, D G; Wang, Y; Cockburn, J W; Belyanin, A
2015-01-01
Stable ultrashort light pulses and frequency combs generated by mode-locked lasers have many important applications including high-resolution spectroscopy, fast chemical detection and identification, studies of ultrafast processes, and laser metrology. While compact mode-locked lasers emitting in the visible and near infrared range have revolutionized photonic technologies, the systems operating in the mid-infrared range where most gases have their strong absorption lines, are bulky and expensive and rely on nonlinear frequency down-conversion. Quantum cascade lasers are the most powerful and versatile compact light sources in the mid-infrared range, yet achieving their mode locked operation remains a challenge despite dedicated effort. Here we report the first demonstration of active mode locking of an external-cavity quantum cascade laser. The laser operates in the mode-locked regime at room temperature and over the full dynamic range of injection currents of a standard commercial laser chip.
Efficient method for the calculation of dissipative quantum transport in quantum cascade lasers.
Greck, Peter; Birner, Stefan; Huber, Bernhard; Vogl, Peter
2015-03-09
We present a novel and very efficient method for calculating quantum transport in quantum cascade lasers (QCLs). It follows the nonequilibrium Green's function (NEGF) framework but sidesteps the calculation of lesser self-energies by replacing them by a quasi-equilibrium expression. This method generalizes the phenomenological Büttiker probe model by taking into account individual scattering mechanisms. It is orders of magnitude more efficient than a fully self-consistent NEGF calculation for realistic devices. We apply this method to a new THz QCL design which works up to 250 K - according to our calculations.
Laser absorption spectroscopy based on a broadband external cavity quantum cascade laser
Sun, Juan; Liu, Ningwu; Deng, Hao; Ding, Junya; Sun, Jiancha; Zhang, Lei; Li, Jingsong
2017-02-01
A tunable diode laser absorption spectroscopy (TDLAS) system based on a broad band external cavity quantum cascade laser (ECQCL) near 7.78 μm was used to study volatile organic compounds (VOCs) measurements. Instead of using a standard infrared mercury cadmium telluride (MCT) detector, a quartz crystal tuning fork (QCTF) as a light detector was successfully used for laser signal detection. Fast Fourier transform (FFT) was used to extract vibration intensity information of QCTF. Primary results indicate that the new developed system has a good reproducibility, and a good agreement was obtained by comparing with data taken from standard spectroscopic database.
Energy Technology Data Exchange (ETDEWEB)
Nie, You-Qi; Zhang, Jun, E-mail: zhangjun@ustc.edu.cn; Pan, Jian-Wei [Hefei National Laboratory for Physical Sciences at the Microscale and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhang, Hong-Fei; Wang, Jian [Hefei National Laboratory for Physical Sciences at the Microscale and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhang, Zhen; Ma, Xiongfeng [Center for Quantum Information, Institute for Interdisciplinary Information Sciences, Tsinghua University, Beijing 100084 (China)
2014-02-03
We present a practical high-speed quantum random number generator, where the timing of single-photon detection relative to an external time reference is measured as the raw data. The bias of the raw data can be substantially reduced compared with the previous realizations. The raw random bit rate of our generator can reach 109 Mbps. We develop a model for the generator and evaluate the min-entropy of the raw data. Toeplitz matrix hashing is applied for randomness extraction, after which the final random bits are able to pass the standard randomness tests.
Nie, You-Qi; Zhang, Hong-Fei; Zhang, Zhen; Wang, Jian; Ma, Xiongfeng; Zhang, Jun; Pan, Jian-Wei
2014-02-01
We present a practical high-speed quantum random number generator, where the timing of single-photon detection relative to an external time reference is measured as the raw data. The bias of the raw data can be substantially reduced compared with the previous realizations. The raw random bit rate of our generator can reach 109 Mbps. We develop a model for the generator and evaluate the min-entropy of the raw data. Toeplitz matrix hashing is applied for randomness extraction, after which the final random bits are able to pass the standard randomness tests.
Energy Technology Data Exchange (ETDEWEB)
Bernacki, Bruce E.; Phillips, Mark C.
2010-05-01
We describe experimental results on the detection of explosives residues using active hyperspectral imaging by illumination of the target surface using an external cavity quantum cascade laser (ECQCL) and imaging using a room temperature microbolometer camera. The active hyperspectral imaging technique forms an image hypercube by recording one image for each tuning step of the ECQCL. The resulting hyperspectral image contains the full absorption spectrum produced by the illumination laser at each pixel in the image which can then be used to identify the explosive type and relative quantity using spectral identification approaches developed initially in the remote sensing community.
Pavlović, Vladan; Stevanović, Ljiljana
2016-04-01
In this paper we analyzed the realization of the electromagnetically induced transparency (EIT) effect in the spherical quantum dot with on-center hydrogenic impurity under the influence of the external magnetic field. Three energy levels of hydrogen impurity 1s0, 2p-1, and 3d-2, together with the probe and control laser fields, which induce σ- transitions between the given states, form a ladder configuration. Optical Bloch equations for such a system are solved in a stationary regime. Dependence of the susceptibility for such a system on the Rabi frequency of the control field, intensity of the external magnetic field, detuning of the control field, and decay rates coefficients are then discussed in detail. Finally, the explanation in dressed state picture is given.
Tiutiunnyk, A.; Mora-Ramos, M. E.; Morales, A. L.; Duque, C. M.; Restrepo, R. L.; Ungan, F.; Martínez-Orozco, J. C.; Kasapoglu, E.; Duque, C. A.
2017-02-01
In this work we shall present a study of inelastic light scattering involving inter-subband electron transitions in coupled GaAs-(Ga,Al)As quantum wells. Calculations include the electron related Raman differential cross section and Raman gain. The effects of an external nonresonant intense laser field are used in order to tune these output properties. The confined electron states will be described by means of a diagonalization procedure within the effective mass and parabolic band approximations. It is shown that the application of the intense laser field can produce values of the intersubband electron Raman gain above 400 cm-1. The system proposed here is an alternative choice for the development of AlxGa1-xAs semiconductor laser diodes that can be tuned via an external nonresonant intense laser field.
An efficient biologically-inspired photocell enhanced by quantum coherence
Creatore, C; Emmott, S; Chin, A W
2013-01-01
Artificially reproducing the biological light reactions responsible for the remarkably efficient photon-to-charge conversion in photosynthetic complexes represents a new direction for the future development of photovoltaic devices. Here, we develop such a paradigm and present a model photocell based on the nanoscale architecture of photosynthetic reaction centres that explicitly harnesses the quantum mechanical effects recently discovered in photosynthetic complexes. Quantum interference of photon absorption/emission induced by the dipole-dipole interaction between molecular excited states guarantees an enhanced light-to-current conversion and power generation for a wide range of realistic parameters, opening a promising new route for designing artificial light-harvesting devices inspired by biological photosynthesis and quantum technologies.
Photoconductive gain and quantum efficiency of remotely doped Ge/Si quantum dot photodetectors
Yakimov, A. I.; Kirienko, V. V.; Armbrister, V. A.; Bloshkin, A. A.; Dvurechenskii, A. V.; Shklyaev, A. A.
2016-10-01
We study the effect of quantum dot charging on the mid-infrared photocurrent, optical gain, hole capture probability, and absorption quantum efficiency in remotely delta-doped Ge/Si quantum dot photodetectors. The dot occupation with holes is controlled by varying dot and doping densities. From our investigations of samples doped to contain from about one to nine holes per dot we observe an over 10 times gain enhancement and similar suppression of the hole capture probability with increased carrier population. The data are explained by quenching the capture process and increasing the photoexcited hole lifetime due to formation of the repulsive Coulomb potential of the extra holes inside the quantum dots. The normal incidence quantum efficiency is found to be strongly asymmetric with respect to applied bias polarity. Based on the polarization-dependent absorption measurements it is concluded that, at a positive voltage, when holes move toward the nearest δ-doping plane, photocurrent is originated from the bound-to-continuum transitions of holes between the ground state confined in Ge dots and the extended states of the Si matrix. At a negative bias polarity, the photoresponse is caused by optical excitation to a quasibound state confined near the valence band edge with subsequent tunneling to the Si valence band. In a latter case, the possibility of hole transfer into continuum states arises from the electric field generated by charge distributed between quantum dots and delta-doping planes.
Influence of External Pressure on the Performance of Quantum Dot Solar Cells.
Kim, Jaehoon; Jeong, Byeong Guk; Roh, Heebum; Song, Jiyun; Park, Myeongjin; Lee, Doh C; Bae, Wan Ki; Lee, Changhee
2016-09-14
We report the influence of post-treatment via the external pressure on the device performance of quantum dot (QD) solar cells. The structural analysis together with optical and electrical characterization on QD solids reveal that the external pressure compacts QD active layers by removing the mesoscopic voids and enhances the charge carrier transport along QD solids, leading to significant increase in JSC of QD solar cells. Increasing the external pressure, by contrast, accompanies reduction in FF and VOC, yielding the trade-off relationship among JSC and FF and VOC in PCE of devices. Optimization at the external pressure in the present study at 1.4-1.6 MPa enables us to achieve over 10% increase in PCE of QD solar cells. The approach and results show that the control over the organization of QDs is the key for the charge transport properties in ensemble and also offer simple yet effective mean to enhance the electrical performance of transistors and solar cells using QDs.
Energy Technology Data Exchange (ETDEWEB)
Hey, Heyder
1996-12-31
We have study three quantum systems under time dependent external fields. The first one is an harmonic oscillator and the external field is quasiperiodic. We prove that the autocorrelation spectrum is absolutely transient continuous covering the real line on the resonant case or pure point under supplementary diophantine conditions. The second one refers to the spin tunneling. We show that an external periodic field may causes a blocking of spin tunneling. The last problem concerns to the resonances of the Floquet spectrum on the non-perturbative region of parameters for the model of an atom with one bound state under an external periodic field. The problems of Quantum Chaology and Quantum Stability are the predominant points of view in this work. (author) 59 refs., 15 figs., 6 tabs.
Quantum Coherent Three-Terminal Thermoelectrics: Maximum Efficiency at Given Power Output
Directory of Open Access Journals (Sweden)
Robert S. Whitney
2016-05-01
Full Text Available This work considers the nonlinear scattering theory for three-terminal thermoelectric devices used for power generation or refrigeration. Such systems are quantum phase-coherent versions of a thermocouple, and the theory applies to systems in which interactions can be treated at a mean-field level. It considers an arbitrary three-terminal system in any external magnetic field, including systems with broken time-reversal symmetry, such as chiral thermoelectrics, as well as systems in which the magnetic field plays no role. It is shown that the upper bound on efficiency at given power output is of quantum origin and is stricter than Carnot’s bound. The bound is exactly the same as previously found for two-terminal devices and can be achieved by three-terminal systems with or without broken time-reversal symmetry, i.e., chiral and non-chiral thermoelectrics.
Efficient Blue Electroluminescence Using Quantum-Confined Two-Dimensional Perovskites.
Kumar, Sudhir; Jagielski, Jakub; Yakunin, Sergii; Rice, Peter; Chiu, Yu-Cheng; Wang, Mingchao; Nedelcu, Georgian; Kim, Yeongin; Lin, Shangchao; Santos, Elton J G; Kovalenko, Maksym V; Shih, Chih-Jen
2016-10-03
Solution-processed hybrid organic-inorganic lead halide perovskites are emerging as one of the most promising candidates for low-cost light-emitting diodes (LEDs). However, due to a small exciton binding energy, it is not yet possible to achieve an efficient electroluminescence within the blue wavelength region at room temperature, as is necessary for full-spectrum light sources. Here, we demonstrate efficient blue LEDs based on the colloidal, quantum-confined 2D perovskites, with precisely controlled stacking down to one-unit-cell thickness (n = 1). A variety of low-k organic host compounds are used to disperse the 2D perovskites, effectively creating a matrix of the dielectric quantum wells, which significantly boosts the exciton binding energy by the dielectric confinement effect. Through the Förster resonance energy transfer, the excitons down-convert and recombine radiatively in the 2D perovskites. We report room-temperature pure green (n = 7-10), sky blue (n = 5), pure blue (n = 3), and deep blue (n = 1) electroluminescence, with record-high external quantum efficiencies in the green-to-blue wavelength region.
Efficient quantum circuits for continuous-time quantum walks on composite graphs
Loke, T.; Wang, J. B.
2017-02-01
In this paper, we investigate the simulation of continuous-time quantum walks on specific classes of graphs, for which it is possible to fast-forward the time-evolution operator to achieve constant-time simulation complexity and to perform the simulation exactly, i.e. ε =0 , while maintaining \\text{poly}≤ft(\\text{log}(n)\\right) efficiency. In particular, we discuss two classes of composite graphs, commuting graphs and Cartesian product of graphs, that contain classes of graphs which can be simulated in this fashion. This allows us to identify new families of graphs that we can efficiently simulate in a quantum circuit framework, providing practical and explicit means to explore quantum-walk based algorithms in laboratories.
High-efficiency "green" quantum dot solar cells.
Pan, Zhenxiao; Mora-Seró, Iván; Shen, Qing; Zhang, Hua; Li, Yan; Zhao, Ke; Wang, Jin; Zhong, Xinhua; Bisquert, Juan
2014-06-25
Semiconductor quantum dots (QDs) are extremely interesting materials for the development of photovoltaic devices, but currently the present the drawback is that the most efficient devices have been prepared with toxic heavy metals of Cd or Pb. Solar cells based on "green" QDs--totally free of Cd or Pb--present a modest efficiency of 2.52%. Herein we achieve effective surface passivation of the ternary CuInS2 (CIS) QDs that provides high photovoltaic quality core/shell CIS/ZnS (CIS-Z) QDs, leading to the development of high-efficiency green QD solar cells that surpass the performance of those based on the toxic cadmium and lead chalcogenides QDs. Using wide absorption range QDs, CIS-Z-based quantum dot sensitized solar cell (QDSC) configuration with high QD loading and with the benefit of the recombination reduction with type-I core/shell structure, we boost the power conversion efficiency of Cd- and Pb-free QDSC to a record of 7.04% (with certified efficiency of 6.66%) under AM 1.5G one sun irradiation. This efficiency is the best performance to date for QDSCs and also demonstrates that it is possible to obtain comparable or even better photovoltaic performance from green CIS QDs to the toxic cadmium and lead chalcogenides QDs.
High-efficiency reconciliation for continuous variable quantum key distribution
Bai, Zengliang; Yang, Shenshen; Li, Yongmin
2017-04-01
Quantum key distribution (QKD) is the most mature application of quantum information technology. Information reconciliation is a crucial step in QKD and significantly affects the final secret key rates shared between two legitimate parties. We analyze and compare various construction methods of low-density parity-check (LDPC) codes and design high-performance irregular LDPC codes with a block length of 106. Starting from these good codes and exploiting the slice reconciliation technique based on multilevel coding and multistage decoding, we realize high-efficiency Gaussian key reconciliation with efficiency higher than 95% for signal-to-noise ratios above 1. Our demonstrated method can be readily applied in continuous variable QKD.
Enhanced Quantum Efficiency From Hybrid Cesium Halide/Copper Photocathode
Energy Technology Data Exchange (ETDEWEB)
Kong, Lingmei; Joly, Alan G.; Droubay, Timothy C.; Gong, Yu; Hess, Wayne P.
2014-04-28
The quantum efficiency of Cu is found to increase dramatically when coated by a CsI film and then irradiated by a UV laser. Over three orders of magnitude quantum efficiency enhancement at 266 nm is observed in CsI/Cu(100), indicating potential application in future photocathode devices. Upon laser irradiation, a large work function reduction to a value less than 2 eV is also observed, significantly greater than for similarly treated CsBr/Cu(100). The initial QE enhancement, prior to laser irradiation, is attributed to interface interaction, surface cleanliness and the intrinsic properties of the Cs halide film. Further QE enhancement following activation is attributed to formation of inter-band states and Cs metal accumulation at the interface induced by laser irradiation.
Trace-gas sensing using the compliance voltage of an external cavity quantum cascade laser
Energy Technology Data Exchange (ETDEWEB)
Phillips, Mark C.; Taubman, Matthew S.
2013-06-04
Quantum cascade lasers (QCLs) are increasingly being used to detect, identify, and measure levels of trace gases in the air. External cavity QCLs (ECQCLs) provide a broadly-tunable infrared source to measure absorption spectra of chemicals and provide high detection sensitivity and identification confidence. Applications include detecting chemical warfare agents and toxic industrial chemicals, monitoring building air quality, measuring greenhouse gases for atmospheric research, monitoring and controlling industrial processes, analyzing chemicals in exhaled breath for medical diagnostics, and many more. Compact, portable trace gas sensors enable in-field operation in a wide range of platforms, including handheld units for use by first responders, fixed installations for monitoring air quality, and lightweight sensors for deployment in unmanned aerial vehicles (UAVs). We present experimental demonstration of a new chemical sensing technique based on intracavity absorption in an external cavity quantum cascade laser (ECQCL). This new technique eliminates the need for an infrared photodetector and gas cell by detecting the intracavity absorption spectrum in the compliance voltage of the laser device itself. To demonstrate and characterize the technique, we measure infrared absorption spectra of chemicals including water vapor and Freon-134a. Sub-ppm detection limits in one second are achieved, with the potential for increased sensitivity after further optimization. The technique enables development of handheld, high-sensitivity, and high-accuracy trace gas sensors for in-field use.
High quantum efficiency S-20 photocathodes for photon counting applications
Orlov, Dmitry A; Pinto, Serge Duarte; Glazenborg, Rene; Kernen, Emilie
2016-01-01
Based on conventional S-20 processes, a new series of high quantum efficiency (QE) photocathodes has been developed that can be specifically tuned for use in the ultraviolet, blue or green regions of the spectrum. The QE values exceed 30% at maximum response, and the dark count rate is found to be as low as 30 Hz/cm2 at room temperature. This combination of properties along with a fast temporal response makes these photocathodes ideal for application in photon counting detectors.
An efficient quantum key distribution protocol with orthogonal product states
Institute of Scientific and Technical Information of China (English)
Yang Yu-Guang; Wen Qiao-Yan
2007-01-01
An efficient quantum key distribution (QKD) protocol with orthogonal product states in the 3(×)3 Hilbert space is presented. The sender, Alice, disorders the orthogonal product state sequence and sends it to Bob. After Alice has published the matching information of the particle sequence, Bob recovers the correct correspondences and makes an orthogonal measurement on the orthogonal product states to obtain the information sent by Alice. Finally, security analysis is also made.
High Quantum Efficiency Phototubes for Atmospheric Fluorescence Telescopes
Kruppke-Hansen, Daniel
2009-01-01
The detection of atmospheric fluorescence light from extensive air showers has become a powerful tool for accurate measurements of the energy and mass of ultra-high energy cosmic ray particles. Employing large area imaging telescopes with mirror areas of 10m2 or more, showers out to distances of 30km and more can be observed. Matrices of low-noise photomultipliers are used to detect the faint light of the air showers against the ambient night-sky background noise. The signal-to-noise ratio of such a system is found to be proportional to the square root of the mirror area times the quantum efficiency of the phototube. Thus, higher quantum efficiencies could potentially improve the quality of the measurement and/or lead to the construction of more compact telescopes. In this paper, we shall discuss such improvements to be expected from high quantum efficiency phototubes that became available on the market only very recently. A series of simulations has been performed with data of different types of commercially...
Internal quantum efficiency enhancement of GaInN/GaN quantum-well structures using Ag nanoparticles
Energy Technology Data Exchange (ETDEWEB)
Iida, Daisuke [Department of Applied Physics, Tokyo University of Science, Katsushika, 125-8585 Tokyo (Japan); Department of Photonics Engineering, Technical University of Denmark, 2800 Lyngby (Denmark); Faculty of Science and Technology, Meijo University, 1-501 Shiogamaguchi Tempaku, 468-8502 Nagoya (Japan); Fadil, Ahmed, E-mail: afad@fotonik.dtu.dk; Ou, Yiyu; Kopylov, Oleksii; Ou, Haiyan [Department of Photonics Engineering, Technical University of Denmark, 2800 Lyngby (Denmark); Chen, Yuntian, E-mail: yuntian@hust.edu.cn [Department of Photonics Engineering, Technical University of Denmark, 2800 Lyngby (Denmark); School of Optical and Electronic Information, Huazhong University of Science and Technology, 430074 Wuhan (China); Iwaya, Motoaki; Takeuchi, Tetsuya; Kamiyama, Satoshi [Faculty of Science and Technology, Meijo University, 1-501 Shiogamaguchi Tempaku, 468-8502 Nagoya (Japan); Akasaki, Isamu [Faculty of Science and Technology, Meijo University, 1-501 Shiogamaguchi Tempaku, 468-8502 Nagoya (Japan); Akasaki Research Center, Nagoya University, Furo-cho Chikusa, 464-8603 Nagoya (Japan)
2015-09-15
We report internal quantum efficiency enhancement of thin p-GaN green quantum-well structure using self-assembled Ag nanoparticles. Temperature dependent photoluminescence measurements are conducted to determine the internal quantum efficiency. The impact of excitation power density on the enhancement factor is investigated. We obtain an internal quantum efficiency enhancement by a factor of 2.3 at 756 W/cm{sup 2}, and a factor of 8.1 at 1 W/cm{sup 2}. A Purcell enhancement up to a factor of 26 is estimated by fitting the experimental results to a theoretical model for the efficiency enhancement factor.
Internal quantum efficiency enhancement of GaInN/GaN quantum-well structures using Ag nanoparticles
Directory of Open Access Journals (Sweden)
Daisuke Iida
2015-09-01
Full Text Available We report internal quantum efficiency enhancement of thin p-GaN green quantum-well structure using self-assembled Ag nanoparticles. Temperature dependent photoluminescence measurements are conducted to determine the internal quantum efficiency. The impact of excitation power density on the enhancement factor is investigated. We obtain an internal quantum efficiency enhancement by a factor of 2.3 at 756 W/cm2, and a factor of 8.1 at 1 W/cm2. A Purcell enhancement up to a factor of 26 is estimated by fitting the experimental results to a theoretical model for the efficiency enhancement factor.
Hydrophilic quantum dots stability against an external low-strength electric field
Energy Technology Data Exchange (ETDEWEB)
Goftman, Valentina V., E-mail: Valentina.Goftman@UGent.be [Department of General and Inorganic Chemistry, Chemistry Institute, Saratov State University, Astrakhanskaya 83, 410012 Saratov (Russian Federation); Laboratory of Food Analysis, Faculty of Pharmaceutical Sciences, Ghent University, Ottergemsesteenweg 460, 9000 Ghent (Belgium); Pankratov, Vladislav A.; Markin, Alexey V. [Department of General and Inorganic Chemistry, Chemistry Institute, Saratov State University, Astrakhanskaya 83, 410012 Saratov (Russian Federation); Ginste, Dries Vande [IBCN/Electromagnetics Group, Department of Information Technology, Ghent University/iMinds, Sint-Pietersnieuwstraat 41, 9000 B-Gent (Belgium); De Saeger, Sarah [Laboratory of Food Analysis, Faculty of Pharmaceutical Sciences, Ghent University, Ottergemsesteenweg 460, 9000 Ghent (Belgium); Goryacheva, Irina Yu. [Department of General and Inorganic Chemistry, Chemistry Institute, Saratov State University, Astrakhanskaya 83, 410012 Saratov (Russian Federation)
2016-02-15
Graphical abstract: - Highlights: • Silica-coated and polymer-covered hydrophilic quantum dots are synthesized and characterized. • Impact of low-strength electric field is compared for both hydrophilic shells. • Silica shell protects the quantum dots fluorescent core when being subjected to a low-strength electric field. - Abstract: Since the stability of nanobiolabels plays a key role in their application, we thoroughly investigated how an external, low-strength electric field impacts on the fluorescent properties of hydrophilic quantum dots (QDs). Two fundamentally different approaches were applied to make the QDs water-soluble, i.e. ligand exchange (namely silica covering) and encapsulation with an amphiphilic polymer. It is shown that, even under a low-strength electric field, the polymer-coated QDs could lose 90% of their brightness because of the weak interaction between the QD's surface and the polymeric molecule. Silica-covered QDs, on the contrary, stay bright and stable owing to the covalently attached dense silica shell. These findings, which are clearly explained and illustrated in the present paper, are of critical importance in the context of hydrophilic QDs’ bioapplication.
An efficient quantum secret sharing protocol with orthogonal product states
Institute of Scientific and Technical Information of China (English)
2007-01-01
An efficient quantum secret sharing protocol with orthogonal product states in the 33 Hilbert space is presented. The particles in the orthogonal product states form two particle sequences. One sequence is sent to Bob and the other is sent to Charlie after rearranging the particle orders. With the help of Alice, Bob and Charlie make the corresponding local measurement to obtain the information of the or- thogonal product states prepared. This protocol has many distinct features such as great capacity and high efficiency.
An efficient quantum secret sharing protocol with orthogonal product states
Institute of Scientific and Technical Information of China (English)
YANG YuGuang; WEN QiaoYan; ZHU FuChen
2007-01-01
An efficient quantum secret sharing protocol with orthogonal product states in the 3(×)3 Hilbert space is presented. The particles in the orthogonal product states form two particle sequences. One sequence is sent to Bob and the other is sent to Charlie after rearranging the particle orders. With the help of Alice, Bob and Charlie make the corresponding local measurement to obtain the information of the orthogonal product states prepared. This protocol has many distinct features such as great capacity and high efficiency.
Efficient sharing of a continuous-variable quantum secret
Tyc, T; Sanders, B C; Tyc, Tomas; Rowe, David J.; Sanders, Barry C.
2003-01-01
We propose an efficient scheme for sharing a continuous variable quantum secret using passive optical interferometry and squeezers: this efficiency is achieved by showing that a maximum of two squeezers is required to replicate the secret state, and we obtain the cheapest configuration in terms of total squeezing cost. Squeezing is a cost for the dealer of the secret as well as for the receivers, and we quantify limitations to the fidelity of the replicated secret state in terms of the squeezing employed by the dealer.
Efficient calculation of dissipative quantum transport properties in semiconductor nanostructures
Energy Technology Data Exchange (ETDEWEB)
Greck, Peter
2012-11-26
We present a novel quantum transport method that follows the non-equilibrium Green's function (NEGF) framework but side steps any self-consistent calculation of lesser self-energies by replacing them by a quasi-equilibrium expression. We termed this method the multi-scattering Buettiker-Probe (MSB) method. It generalizes the so-called Buettiker-Probe model but takes into account all relevant individual scattering mechanisms. It is orders of magnitude more efficient than a fully selfconsistent non-equilibrium Green's function calculation for realistic devices, yet accurately reproduces the results of the latter method as well as experimental data. This method is fairly easy to implement and opens the path towards realistic three-dimensional quantum transport calculations. In this work, we review the fundamentals of the non-equilibrium Green's function formalism for quantum transport calculations. Then, we introduce our novel MSB method after briefly reviewing the original Buettiker-Probe model. Finally, we compare the results of the MSB method to NEGF calculations as well as to experimental data. In particular, we calculate quantum transport properties of quantum cascade lasers in the terahertz (THz) and the mid-infrared (MIR) spectral domain. With a device optimization algorithm based upon the MSB method, we propose a novel THz quantum cascade laser design. It uses a two-well period with alternating barrier heights and complete carrier thermalization for the majority of the carriers within each period. We predict THz laser operation for temperatures up to 250 K implying a new temperature record.
Power-efficient III-V/silicon external cavity DBR lasers.
Zilkie, A J; Seddighian, P; Bijlani, B J; Qian, W; Lee, D C; Fathololoumi, S; Fong, J; Shafiiha, R; Feng, D; Luff, B J; Zheng, X; Cunningham, J E; Krishnamoorthy, A V; Asghari, M
2012-10-08
We report the design and characterization of external-cavity DBR lasers built with a III-V-semiconductor reflective-SOA with spot-size converter edge-coupled to SOI waveguides containing Bragg grating mirrors. The un-cooled lasers have wall-plug-efficiencies of up to 9.5% at powers of 6 mW. The lasers are suitable for making power efficient, hybrid WDM transmitters in a CMOS-compatible SOI optical platform.
Zimmermann, Tomas
2011-01-01
We propose to measure nonadiabaticity of molecular quantum dynamics rigorously with the quantum fidelity between the Born-Oppenheimer and fully nonadiabatic dynamics. It is shown that this measure of nonadiabaticity applies in situations where other criteria, such as the energy gap criterion or the extent of population transfer, fail. We further propose to estimate this quantum fidelity efficiently with a generalization of the dephasing representation to multiple surfaces. Two variants of the multiple-surface dephasing representation (MSDR) are introduced, in which the nuclei are propagated either with the fewest-switches surface hopping (FSSH) or with the locally mean field dynamics (LMFD). The LMFD can be interpreted as the Ehrenfest dynamics of an ensemble of nuclear trajectories, and has been used previously in the nonadiabatic semiclassical initial value representation. In addition to propagating an ensemble of classical trajectories, the MSDR requires evaluating nonadiabatic couplings and solving the Sc...
Quantum efficiency of a single microwave photon detector based on a semiconductor double quantum dot
Wong, Clement H.; Vavilov, Maxim G.
2017-01-01
Motivated by recent interest in implementing circuit quantum electrodynamics with semiconducting quantum dots, we consider a double quantum dot (DQD) capacitively coupled to a superconducting resonator that is driven by the microwave field of a superconducting transmission line. We analyze the DQD current response using input-output theory and show that the resonator-coupled DQD is a sensitive microwave single photon detector. Using currently available experimental parameters of DQD-resonator coupling and dissipation, including the effects of 1 /f charge noise and phonon noise, we determine the parameter regime for which incident photons are completely absorbed and near-unit ≳98 % efficiency can be achieved. We show that this regime can be reached by using very high quality resonators with quality factor Q ≃105 .
Optimal power and efficiency of quantum Stirling heat engines
Yin, Yong; Chen, Lingen; Wu, Feng
2017-01-01
A quantum Stirling heat engine model is established in this paper in which imperfect regeneration and heat leakage are considered. A single particle which contained in a one-dimensional infinite potential well is studied, and the system consists of countless replicas. Each particle is confined in its own potential well, whose occupation probabilities can be expressed by the thermal equilibrium Gibbs distributions. Based on the Schrödinger equation, the expressions of power output and efficiency for the engine are obtained. Effects of imperfect regeneration and heat leakage on the optimal performance are discussed. The optimal performance region and the optimal values of important parameters of the engine cycle are obtained. The results obtained can provide some guidelines for the design of a quantum Stirling heat engine.
Efficient estimation of resonant coupling between quantum systems.
Stenberg, Markku P V; Sanders, Yuval R; Wilhelm, Frank K
2014-11-21
We present an efficient method for the characterization of two coupled discrete quantum systems, one of which can be controlled and measured. For two systems with transition frequencies ωq, ωr, and coupling strength g we show how to obtain estimates of g and ωr whose error decreases exponentially in the number of measurement shots rather than as a power law expected in simple approaches. Our algorithm can thereby identify g and ωr simultaneously with high precision in a few hundred measurement shots. This is achieved by adapting measurement settings upon data as it is collected. We also introduce a method to eliminate erroneous estimates with small overhead. Our algorithm is robust against the presence of relaxation and typical noise. Our results are applicable to many candidate technologies for quantum computation, in particular, for the characterization of spurious two-level systems in superconducting qubits or stripline resonators.
Efficient Biologically Inspired Photocell Enhanced by Delocalized Quantum States
Creatore, C.; Parker, M. A.; Emmott, S.; Chin, A. W.
2013-12-01
Artificially implementing the biological light reactions responsible for the remarkably efficient photon-to-charge conversion in photosynthetic complexes represents a new direction for the future development of photovoltaic devices. Here, we develop such a paradigm and present a model photocell based on the nanoscale architecture and molecular elements of photosynthetic reaction centers. Quantum interference of photon absorption and emission induced by the dipole-dipole interaction between molecular excited states guarantees an enhanced light-to-current conversion and power generation for a wide range of electronic, thermal, and optical parameters for optimized dipolar geometries. This result opens a promising new route for designing artificial light-harvesting devices inspired by biological photosynthesis and quantum technologies.
A grating-coupled external cavity InAs/InP quantum dot laser with 85-nm tuning range
Wei, Heng; Jin, Peng; Luo, Shuai; Ji, Hai-Ming; Yang, Tao; Li, Xin-Kun; Wu, Jian; An, Qi; Wu, Yan-Hua; Chen, Hong-Mei; Wang, Fei-Fei; Wu, Ju; Wang, Zhan-Guo
2013-09-01
The optical performance of a grating-coupled external cavity laser based on InAs/InP quantum dots is investigated. Continuous tuning from 1391 nm to 1468 nm is realized at an injection current of 1900 mA. With the injection current increasing to 2300 mA, the tuning is blue shifted to some extent to the range from 1383 nm to 1461 nm. By combining the effect of the injection current with the grating tuning, the total tuning bandwidth of the external cavity quantum-dot laser can reach up to 85 nm. The dependence of the threshold current on the tuning wavelength is also presented.
Radix-independent, efficient arrays for multi-level n-qudit quantum and reversible computation
Mohammadi, Majid
2015-08-01
Multiple-valued quantum logic allows the designers to reduce the number of cells while obtaining more functionality in the quantum circuits. Large r-valued reversible or quantum gates ( r stands for radix and is more than 2) cannot be directly realized in the current quantum technology. Therefore, we are interested in designing the large reversible and quantum controlled gates using the arrays of one-quantum digit (qudit) or two-qudit gates. In our previous work, we proposed quantum arrays to implement the r-valued quantum circuits. In this paper, we propose novel efficient structures and arrays, for r-valued quantum logic gates. The quantum costs of the developed quantum arrays are independent of the radix of calculations in the quantum circuit.
Energy Technology Data Exchange (ETDEWEB)
Bueckers, Christina; Kuehn, Eckhard; Schlichenmaier, Christoph; Koch, Stephan W. [Department of Physics and Material Sciences Center, Philipps-University Marburg (Germany); Imhof, Sebastian; Thraenhardt, Angela [Faculty of Natural Sciences, Chemnitz University of Technology, Chemnitz (Germany); Hader, Joerg; Moloney, Jerome V. [Nonlinear Control Strategies, Inc., Tucson, AZ (United States); College of Optical Sciences, University of Arizona, Tucson, AZ (United States); Rubel, Oleg [Thunder Bay Regional Research Institute, Thunder Bay, ON (Canada); Department of Physics, Lakehead University, Thunder Bay, ON (Canada); Zhang, Wei [Centre for Biophotonics, SIPBS, University of Strathclyde, Glasgow, Scotland (United Kingdom); Ackemann, Thorsten [SUPA and Department of Physics, University of Strathclyde, Glasgow, Scotland (United Kingdom)
2010-04-15
This article gives an overview of the microscopic theory used to quantitatively model a wide range of semiconductor laser gain materials. As a snapshot of the current state of research, applications to a variety of actual quantum-well systems are presented. Detailed theory-experiment comparisons are shown and it is analyzed how the theory can be used to extract poorly known material parameters. The intrinsic laser loss processes due to radiative and nonradiative Auger recombination are evaluated microscopically. The results are used for realistic simulations of vertical-external-cavity surface-emitting laser systems. To account for nonequilibrium effects, a simplified model is presented using pre-computed microscopic scattering and dephasing rates. Prominent deviations from quasi-equilibrium carrier distributions are obtained under strong in-well pumping conditions. (Abstract Copyright [2010], Wiley Periodicals, Inc.)
Linear and nonlinear absorption coefficients of spherical quantum dot inside external magnetic field
Çakır, Bekir; Yakar, Yusuf; Özmen, Ayhan
2017-04-01
We have calculated the wavefunctions and energy eigenvalues of spherical quantum dot with infinite potential barrier inside uniform magnetic field. In addition, we have investigated the magnetic field effect on optical transitions between Zeeman energy states. The results are expressed as a function of dot radius, incident photon energy and magnetic field strength. The results present that, in large dot radii, the external magnetic field affects strongly the optical transitions between Zeeman states. In the strong spatial confinement case, energy level is relatively insensitive to the magnetic field, and electron spatial confinement prevails over magnetic confinement. Also, while m varies from -1 to +1, the peak positions of the optical transitions shift toward higher energy (blueshift).
Linear and nonlinear absorption coefficients of spherical quantum dot inside external magnetic field
Energy Technology Data Exchange (ETDEWEB)
Çakır, Bekir, E-mail: bcakir@selcuk.edu.tr [Physics Department, Faculty of Science, Selcuk University, Campus, 42075 Konya (Turkey); Yakar, Yusuf, E-mail: yuyakar@yahoo.com [Physics Department, Faculty of Arts and Science, Aksaray University, Campus, 68100 Aksaray (Turkey); Özmen, Ayhan [Physics Department, Faculty of Science, Selcuk University, Campus, 42075 Konya (Turkey)
2017-04-01
We have calculated the wavefunctions and energy eigenvalues of spherical quantum dot with infinite potential barrier inside uniform magnetic field. In addition, we have investigated the magnetic field effect on optical transitions between Zeeman energy states. The results are expressed as a function of dot radius, incident photon energy and magnetic field strength. The results present that, in large dot radii, the external magnetic field affects strongly the optical transitions between Zeeman states. In the strong spatial confinement case, energy level is relatively insensitive to the magnetic field, and electron spatial confinement prevails over magnetic confinement. Also, while m varies from −1 to +1, the peak positions of the optical transitions shift toward higher energy (blueshift).
External cavity-quantum cascade laser (EC-QCL) spectroscopy for protein analysis in bovine milk.
Kuligowski, Julia; Schwaighofer, Andreas; Alcaráz, Mirta Raquel; Quintás, Guillermo; Mayer, Helmut; Vento, Máximo; Lendl, Bernhard
2017-04-22
The analytical determination of bovine milk proteins is important in food and non-food industrial applications and yet, rather labour-intensive wet-chemical, low-throughput methods have been employed since decades. This work proposes the use of external cavity-quantum cascade laser (EC-QCL) spectroscopy for the simultaneous quantification of the most abundant bovine milk proteins and the total protein content based on the chemical information contained in mid-infrared (IR) spectral features of the amide I band. Mid-IR spectra of protein standard mixtures were used for building partial least squares (PLS) regression models. Protein concentrations in commercial bovine milk samples were calculated after chemometric compensation of the matrix contribution employing science-based calibration (SBC) without sample pre-processing. The use of EC-QCL spectroscopy together with advanced multivariate data analysis allowed the determination of casein, α-lactalbumin, β-lactoglobulin and total protein content within several minutes.
Enhancement of the thermoelectric figure of merit in a quantum dot due to external ac field
Energy Technology Data Exchange (ETDEWEB)
Chen, Qiao, E-mail: cqhy1127@yahoo.com.cn [Department of Maths and Physics, Hunan Institute of Engineering, Xiangtan 411104 (China); Wang, Zhi-yong, E-mail: wzyong@cqut.edu.cn [School of Optoelectronic Information, Chongqing University of Technology, Chongqing 400054 (China); Xie, Zhong-Xiang [Department of Mathematics and Physics, Hunan Institute of Technology, Hengyang 421002 (China)
2013-08-15
We investigate the figure of merit of a quantum dot (QD) system irradiated with an external microwave filed by nonequilibrium Green's function (NGF) technique. Results show that the frequency of microwave field influence the figure of merit ZT significantly. At low temperature, a sharp peak can be observed in the figure of merit ZT as the frequency of ac field increases. As the frequency varies, several zero points and resonant peaks emerge in the figure of merit ZT. By adjusting the frequency of the microwave field, we can obtain high ZT. The figure of merit ZT increases with the decreasing of linewidth function Γ. In addition, Wiedemann–Franz law does not hold, particularly in the low frequency region due to multi-photon emission and absorption. Some novel thermoelectric properties are also found in two-level QD system.
Mid-infrared gas absorption sensor based on a broadband external cavity quantum cascade laser
Sun, Juan; Deng, Hao; Liu, Ningwu; Wang, Hongliang; Yu, Benli; Li, Jingsong
2016-12-01
We developed a laser absorption sensor based on a pulsed, broadband tunable external cavity quantum cascade laser (ECQCL) centered at 1285 cm-1. Unlike traditional infrared spectroscopy system, a quartz crystal tuning fork (QCTF) as a light detector was used for laser signal detection. Fast Fourier transform was applied to extract vibration intensity information of QCTF. The sensor system is successfully tested on nitrous oxide (N2O) spectroscopy measurements and compared with a standard infrared detector. The wide wavelength tunability of ECQCL will allow us to access the fundamental vibrational bands of many chemical agents, which are well-suited for trace explosive, chemical warfare agent, and toxic industrial chemical detection and spectroscopic analysis.
Highly efficient metallic optical incouplers for quantum well infrared photodetectors
Liu, Long; Chen, Yu; Huang, Zhong; Du, Wei; Zhan, Peng; Wang, Zhenlin
2016-01-01
Herein, we propose a highly efficient metallic optical incoupler for a quantum well infrared photodetector (QWIP) operating in the spectrum range of 14~16 μm, which consists of an array of metal micropatches and a periodically corrugated metallic back plate sandwiching a semiconductor active layer. By exploiting the excitations of microcavity modes and hybrid spoof surface plasmons (SSPs) modes, this optical incoupler can convert infrared radiation efficiently into the quantum wells (QWs) layer of semiconductor region with large electrical field component (Ez) normal to the plane of QWs. Our further numerical simulations for optimization indicate that by tuning microcavity mode to overlap with hybrid SSPs mode in spectrum, a coupled mode is formed, which leads to 33-fold enhanced light absorption for QWs centered at wavelength of 14.5 μm compared with isotropic absorption of QWs without any metallic microstructures, as well as a large value of coupling efficiency (η) of |Ez|2 ~ 6. This coupled mode shows a slight dispersion over ~40° and weak polarization dependence, which is quite beneficial to the high performance infrared photodetectors. PMID:27456691
Highly efficient metallic optical incouplers for quantum well infrared photodetectors
Liu, Long; Chen, Yu; Huang, Zhong; Du, Wei; Zhan, Peng; Wang, Zhenlin
2016-07-01
Herein, we propose a highly efficient metallic optical incoupler for a quantum well infrared photodetector (QWIP) operating in the spectrum range of 14~16 μm, which consists of an array of metal micropatches and a periodically corrugated metallic back plate sandwiching a semiconductor active layer. By exploiting the excitations of microcavity modes and hybrid spoof surface plasmons (SSPs) modes, this optical incoupler can convert infrared radiation efficiently into the quantum wells (QWs) layer of semiconductor region with large electrical field component (Ez) normal to the plane of QWs. Our further numerical simulations for optimization indicate that by tuning microcavity mode to overlap with hybrid SSPs mode in spectrum, a coupled mode is formed, which leads to 33-fold enhanced light absorption for QWs centered at wavelength of 14.5 μm compared with isotropic absorption of QWs without any metallic microstructures, as well as a large value of coupling efficiency (η) of |Ez|2 ~ 6. This coupled mode shows a slight dispersion over ~40° and weak polarization dependence, which is quite beneficial to the high performance infrared photodetectors.
Hassan, Ali Saif M; Joag, Pramod S
2010-01-01
We investigate how thermal quantum discord $(QD)$ and classical correlations $(CC)$ of a two qubit one-dimensional XX Heisenberg chain in thermal equilibrium depend on temperature of the bath as well as on nonuniform external magnetic fields applied to two qubits and varied separately. We show that the behaviour of $QD$ differs in many unexpected ways from thermal entanglement $(EN)$. For the nonuniform case, $(B_1= - B_2)$ we find that $QD$ and $CC$ are equal for all values of $(B_1=-B_2)$ and for different temperatures. We show that, in this case, the thermal states of the system belong to a class of mixed states and satisfy certain conditions under which $QD$ and $CC$ are equal. The specification of this class and the corresponding conditions is completely general and apply to any quantum system in a state in this class and satisfying these conditions. We further find the relative contributions of $QD$ and $CC$ can be controlled easily by changing the relative magnitudes of $B_1$ and $B_2$.
High quantum efficiency S-20 photocathodes in photon counting detectors
Orlov, D. A.; DeFazio, J.; Duarte Pinto, S.; Glazenborg, R.; Kernen, E.
2016-04-01
Based on conventional S-20 processes, a new series of high quantum efficiency (QE) photocathodes has been developed that can be specifically tuned for use in the ultraviolet, blue or green regions of the spectrum. The QE values exceed 30% at maximum response, and the dark count rate is found to be as low as 30 Hz/cm2 at room temperature. This combination of properties along with a fast temporal response makes these photocathodes ideal for application in photon counting detectors, which is demonstrated with an MCP photomultiplier tube for single and multi-photoelectron detection.
Photocurrent extraction efficiency in colloidal quantum dot photovoltaics
Kemp, K. W.
2013-01-01
The efficiency of photocurrent extraction was studied directly inside operating Colloidal Quantum Dot (CQD) photovoltaic devices. A model was derived from first principles for a thin film p-n junction with a linearly spatially dependent electric field. Using this model, we were able to clarify the origins of recent improvement in CQD solar cell performance. From current-voltage diode characteristics under 1 sun conditions, we extracted transport lengths ranging from 39 nm to 86 nm for these materials. Characterization of the intensity dependence of photocurrent extraction revealed that the dominant loss mechanism limiting the transport length is trap-mediated recombination. © 2013 AIP Publishing LLC.
Internal quantum efficiency enhancement of GaInN/GaN quantum-well structures using Ag nanoparticles
DEFF Research Database (Denmark)
Iida, Daisuke; Fadil, Ahmed; Chen, Yuntian
2015-01-01
We report internal quantum efficiency enhancement of thin p-GaN green quantumwell structure using self-assembled Ag nanoparticles. Temperature dependent photoluminescence measurements are conducted to determine the internal quantum efficiency. The impact of excitation power density...... on the enhancement factor is investigated. We obtain an internal quantum efficiency enhancement by a factor of 2.3 at 756 W/cm2 , and a factor of 8.1 at 1 W/cm2 . A Purcell enhancement up to a factor of 26 is estimated by fitting the experimental results to a theoretical model for the efficiency enhancement factor....
Leschkies, Kurtis S.; Jacobs, Alan G.; Norris, David J.; Aydil, Eray S.
2009-11-01
External quantum efficiency in solar cells based on junctions between PbSe quantum dots (QDs) and thin ZnO films is increased by replacing the ZnO films with a vertically oriented array of single-crystalline ZnO nanowires, and infiltrating this array with colloidal QDs. When illuminated with 100 mW/cm2 of simulated solar light, QD-nanowire solar cells exhibited power conversion efficiencies approaching 2%, approximately three times higher than that achieved with thin-film ZnO devices constructed with the same amount of QDs. Significant photocurrent and power conversion improvement with increasing nanowire length is consistent with higher exciton and charge collection efficiencies.
Energy Technology Data Exchange (ETDEWEB)
Phillips, Mark C.; Taubman, Matthew S.; Kriesel, Jason M.
2015-02-08
We describe a prototype trace gas sensor designed for real-time detection of multiple chemicals. The sensor uses an external cavity quantum cascade laser (ECQCL) swept over its tuning range of 940-1075 cm-1 (9.30-10.7 µm) at a 10 Hz repetition rate.
Karpf, Andreas; Rao, Gottipaty N
2009-01-10
The absorption spectra and wavelength modulation spectroscopy (WMS) of NO(2) using a tunable, external cavity CW quantum cascade laser operating at room temperature in the region of 1625 to 1645 cm(-1) are reported. The external cavity quantum cascade laser enabled us to record continuous absorption spectra of low concentrations of NO(2) over a broad range (approximately 16 cm(-1)), demonstrating the potential for simultaneously recording the complex spectra of multiple species. This capability allows the identification of a particular species of interest with high sensitivity and selectivity. The measured spectra are in excellent agreement with the spectra from the high-resolution transmission molecular absorption database [J. Quant. Spectrosc. Radiat. Transfer 96, 139-204 (2005)]. We also conduct WMS for the first time using an external cavity quantum cascade laser, a technique that enhances the sensitivity of detection. By employing WMS, we could detect low-intensity absorption lines, which are not visible in the simple absorption spectra, and demonstrate a minimum detection limit at the 100 ppb level with a short-path absorption cell. Details of the tunable, external cavity quantum cascade laser system and its performance are discussed.
Franzrahe, K.; Henseler, P.; Ricci, A.; Strepp, W.; Sengupta, S.; Dreher, M.; Kircher, Chr.; Lohrer, M.; Quester, W.; Binder, K.; Nielaba, P.
2005-07-01
Quantum effects, structures and phase transitions in Nano-systems have been analyzed. An overview is given on the results of our computations on structural and elastic properties of model colloids, on phase transitions of model colloids in external fields, and on structural and electronic properties of stretched atomic wires.
Simulating Hamiltonians in Quantum Networks Efficient Schemes and Complexity Bounds
Wocjan, P; Janzing, D; Beth, T; Wocjan, Pawel; Roetteler, Martin; Janzing, Dominik; Beth, Thomas
2001-01-01
We address the problem of simulating pair-interaction Hamiltonians in n node quantum networks where the subsystems have arbitrary, possibly different, dimensions. We show that any pair-interaction can be used to simulate any other by applying sequences of appropriate local control sequences. Efficient schemes for decoupling and time reversal can be constructed from orthogonal arrays. Conditions on time optimal simulation are formulated in terms of spectral majorization of matrices characterizing the coupling parameters. Moreover, we consider a specific system of n harmonic oscillators with bilinear interaction. In this case, decoupling can efficiently be achieved using the combinatorial concept of difference schemes. For this type of interactions we present optimal schemes for inversion.
High efficiency SHG of orbital angular momentum light in an external cavity
Zhou, Zhi-Yuan; Ding, Dong-Sheng; Jiang, Yun-Kun; Zhang, Wei; Shi, Shuai; Shi, Bao-Sen; Guo, Guang-Can
2014-01-01
Traditional methods for generating orbital angular momentum (OAM) light include holographic diffraction gratings, vortex phase plate and spatial light modulator. In this article, we report a new method for high efficient OAM light generation. By pumping an external cavity contains a quasi phase matching nonlinear crystal with a fundamental OAM carrying light and properly aligning the cavity, mode matching between the pump light and the cavitys higher order Laguerre-Gaussian (LG) mode is achieved, conversion efficiency up to 10.3 percentage have been obtained. We have demonstrated that the cavity can stably operate at its higher order LG mode just as Gaussian mode for the first time. The SHG light possesses a doubled OAM value with respect to the pump light. The parameters that affect the beam quality and conversion efficiency are discussed in detail. Our work opens a brand new field in laser optics, and makes the first step toward high efficiency OAM light processing.
Dehyar, A.; Rezaei, G.; Zamani, A.
2016-10-01
In the present work, we have investigated the simultaneous effects of external electric and magnetic fields on the energy spectrum of an electron bound to an impurity confined in a spherical quantum dot with Kratzer potential. To this end, energy eigenvalues are obtained using the asymptotic iteration method. The energy dependencies upon the confinement potential and external fields are reported. Our results indicate that the confinement potential, external electric and magnetic fields have a great influence on the energy eigenvalues of the system. We found that, an increase in the magnetic field increases the energy eigenvalues of the states with positive magnetic quantum number, m ≽ 0 . While, the states with negative m decrease, reaching to their minimum values and increase again, with increasing the magnetic field. Moreover, an increase in electric field strength leads to decrease the confinement effects and energy eigenvalues of the system.
Quantum efficiency of colloidal suspensions containing quantum dot/silica hybrid particles
Jeon, Hyungjoon; Yoon, Cheolsang; Lee, Sooho; Lee, Doh C.; Shin, Kyusoon; Lee, Kangtaek
2016-10-01
We have investigated the fluorescence properties of colloidal suspensions conntaining quantum dot (QD)/silica hybrid particles. First, we synthesized QD/silica hybrid particles with silica-QD-silica (SQS) core-shell-shell geometry, and monitored the quantum efficiencies of their suspensions at various particle concentrations. We found that the quantum efficiency (QE) of SQS particles in deionized (DI) water was much lower than that of the QDs even at low particle concentration, mainly due to the light scattering of emitted photons at the silica/water interface, followed by reabsorption by QDs. As the concentration of SQS particles was increased, both light scattering and reabsorption by QDs became more important, which further reduced the QE. Refractive index-matched solvent, however, reduced light scattering, yielding greater QE than DI water. Next, we induced aggregation of SQS particles, and found that QE increased as particles aggregated in DI water because of reduced light scattering and reabsorption, whereas it remained almost constant in the refractive index-matched solvent. Finally, we studied aggregation of highly concentrated silica particle suspensions containing a low concentration of SQS particles, and found that QE increased with aggregation because light scattering and reabsorption were reduced.
Wang, Hao; Wu, Guoxing; Chen, Daojiong
2012-07-01
Based on the isotropic two spin-1/2 qubits Heisenberg model with Dzyaloshinskii-Moriya interaction in a constant external magnetic field, we have constructed the entangled quantum Otto engine. Expressions for the basic thermodynamic quantities, i.e. the amount of heat exchange, the net work output and the efficiency, are derived. The influence of thermal entanglement on these basic thermodynamic quantities is investigated. Moreover, some intriguing features and their qualitative explanations in zero and finite magnetic field are given. The validity of the second law of thermodynamics is confirmed in the system. The results obtained here have general significance and will be useful in increasing understanding of the performance of an entangled quantum engine.
Huang, Yande; Su, Bao-Ning; Ye, Qingmei; Palaniswamy, Venkatapuram A; Bolgar, Mark S; Raglione, Thomas V
2014-01-01
The classical internal standard quantitative NMR (qNMR) method determines the purity of an analyte by the determination of a solution containing the analyte and a standard. Therefore, the standard must meet the requirements of chemical compatibility and lack of resonance interference with the analyte as well as a known purity. The identification of such a standard can be time consuming and must be repeated for each analyte. In contrast, the external standard qNMR method utilizes a standard with a known purity to calibrate the NMR instrument. The external standard and the analyte are measured separately, thereby eliminating the matter of chemical compatibility and resonance interference between the standard and the analyte. However, the instrumental factors, including the quality of NMR tubes, must be kept the same. Any deviations will compromise the accuracy of the results. An innovative qNMR method reported herein utilizes an internal reference substance along with an external standard to assume the role of the standard used in the traditional internal standard qNMR method. In this new method, the internal reference substance must only be chemically compatible and be free of resonance-interference with the analyte or external standard whereas the external standard must only be of a known purity. The exact purity or concentration of the internal reference substance is not required as long as the same quantity is added to the external standard and the analyte. The new method reduces the burden of searching for an appropriate standard for each analyte significantly. Therefore the efficiency of the qNMR purity assay increases while the precision of the internal standard method is retained. Copyright © 2013 Elsevier B.V. All rights reserved.
Calculation method of quantum efficiency to TiO2 nanocrystal photocatalysis reaction
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
The quantum yield is an important factor to evaluate the efficiency of photoreactor. This article gives an overall calculation method of the quantum efficiency(ф) and the apparent quantum efficiency(ф2) to the TiO2/UV photocatalysis system. Furthermore, for the immobility system (IS), the formulation of the faction of light absorbed by the TiO2 thin film is proposed so as to calculate the quantum efficiency by using the measured value and theoretic calculated value of transmissivity (T). For the suspension system(SS), due to the difficulty to obtain the absorption coefficient (α) of TiO2 particulates, the quantum efficiency is calculated by means of the relative photonic efficiency (ξr) and the standard quantum yield (фstandard).
Efficient generation of photonic entanglement and multiparty quantum communication
Energy Technology Data Exchange (ETDEWEB)
Trojek, Pavel
2007-09-15
This thesis deals largely with the problem of efficient generation of photonic entanglement with the principal aim of developing a bright source of polarization-entangled photon pairs, which meets the requirements for reliable and economic operation of quantum communication prototypes and demonstrators. Our approach uses a cor-related photon-pair emission in nonlinear process of spontaneous parametric downconversion pumped by light coming from a compact and cheap blue laser diode. Two alternative source configurations are examined within the thesis. The first makes use of a well established concept of degenerate non-collinear emission from a single type-II nonlinear crystal and the second relies on a novel method where the emissions from two adjacent type-I phase-matched nonlinear crystals operated in collinear non-degenerate regime are coherently overlapped. The latter approach showed to be more effective, yielding a total detected rate of almost 10{sup 6} pairs/s at >98% quantum interference visibility of polarization correlations. The second issue addressed within the thesis is the simplification and practical implementation of quantum-assisted solutions to multiparty communication tasks. We show that entanglement is not the only non-classical resource endowing the quantum multiparty information processing its power. Instead, only the sequential communication and transformation of a single qubit can be sufficient to accomplish certain tasks. This we prove for two distinct communication tasks, secret sharing and communication complexity. Whereas the goal of the first is to split a cryptographic key among several parties in a way that its reconstruction requires their collaboration, the latter aims at reducing the amount of communication during distributed computational tasks. Importantly, our qubitassisted solutions to the problems are feasible with state-of-the-art technology. This we clearly demonstrate in the laboratory implementation for 6 and 5 parties
Energy Technology Data Exchange (ETDEWEB)
Kim, T.; Liu, B.; Smith, R.; Athanasiou, M.; Gong, Y.; Wang, T., E-mail: t.wang@sheffield.ac.uk [Department of Electronic and Electrical Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)
2014-04-21
A “coherent” nanocavity structure has been designed on two-dimensional well-ordered InGaN/GaN nanodisk arrays with an emission wavelength in the green spectral region, leading to a massive enhancement in resonance mode in the green spectra region. By means of a cost-effective nanosphere lithography technique, we have fabricated such a structure on an InGaN/GaN multiple quantum well epiwafer and have observed the “coherent” nanocavity effect, which leads to an enhanced spontaneous emission (SE) rate. The enhanced SE rate has been confirmed by time resolved photoluminescence measurements. Due to the coherent nanocavity effect, we have achieved a massive improvement in internal quantum efficiency with a factor of 88, compared with the as-grown sample, which could be significant to bridge the “green gap” in solid-state lighting.
Institute of Scientific and Technical Information of China (English)
NIU Jun; YANG Zhi; CHANG Ben-Kang
2009-01-01
The mathematical expression of the electron diffusion and drift length LDE of exponential doping photocathode is deduced. In the quantum efficiency equation of the reflection-mode uniform doping cathode, substituting L_(DE) for L_D, the equivalent quantum efficiency equation of the reflection-mode exponential doping cathode is obtained. By using the equivalent equation, theoretical simulation and experimental analysis shows that the equivalent index formula and formula-doped cathode quantum efficiency results in fine.The equivalent equation avoids complicated calculation, thereby simplifies the process of solving the quantum efficiency of exponential doping photocathode.
Directory of Open Access Journals (Sweden)
Xionghe Qin
2017-09-01
Full Text Available In this study, we bridge an important gap in the literature by comparing the extent to which external technology spillovers, as indicated by foreign direct investment (FDI, and internal technology spillovers, as indicated by university-institute-industry cooperation (UIC, influence innovation efficiency in China. We divide the innovation process into two sequential stages, namely the knowledge creation and technology commercialization stages, and employ a network data envelopment analysis approach to measure innovation efficiency at each stage. The spatial analysis of the distribution of knowledge creation efficiency and technology commercialization efficiency reveals the heterogeneity of innovation efficiency at the provincial level. Then, a panel data regression is used to analyze the effect of FDI and UIC on innovation efficiency at each stage, using data from 2009 to 2015 for 30 provinces in China. By comparing FDI with UIC, we find that FDI has a higher coefficient and stronger significance level at the knowledge creation stage, while only industry-institute linkages exhibit a stronger association with innovation efficiency at the technology commercialization stage.
Pseudospectral Gaussian quantum dynamics: Efficient sampling of potential energy surfaces
Heaps, Charles W.; Mazziotti, David A.
2016-04-01
Trajectory-based Gaussian basis sets have been tremendously successful in describing high-dimensional quantum molecular dynamics. In this paper, we introduce a pseudospectral Gaussian-based method that achieves accurate quantum dynamics using efficient, real-space sampling of the time-dependent basis set. As in other Gaussian basis methods, we begin with a basis set expansion using time-dependent Gaussian basis functions guided by classical mechanics. Unlike other Gaussian methods but characteristic of the pseudospectral and collocation methods, the basis set is tested with N Dirac delta functions, where N is the number of basis functions, rather than using the basis function as test functions. As a result, the integration for matrix elements is reduced to function evaluation. Pseudospectral Gaussian dynamics only requires O ( N ) potential energy calculations, in contrast to O ( N 2 ) evaluations in a variational calculation. The classical trajectories allow small basis sets to sample high-dimensional potentials. Applications are made to diatomic oscillations in a Morse potential and a generalized version of the Henon-Heiles potential in two, four, and six dimensions. Comparisons are drawn to full analytical evaluation of potential energy integrals (variational) and the bra-ket averaged Taylor (BAT) expansion, an O ( N ) approximation used in Gaussian-based dynamics. In all cases, the pseudospectral Gaussian method is competitive with full variational calculations that require a global, analytical, and integrable potential energy surface. Additionally, the BAT breaks down when quantum mechanical coherence is particularly strong (i.e., barrier reflection in the Morse oscillator). The ability to obtain variational accuracy using only the potential energy at discrete points makes the pseudospectral Gaussian method a promising avenue for on-the-fly dynamics, where electronic structure calculations become computationally significant.
Directory of Open Access Journals (Sweden)
Daniel F. Heuermann
2012-08-01
Full Text Available Inspired by the literature on the role of local career networks for the quality of labour market matches we investigate whether human capital externalities arise from a higher job matching efficiency in skilled regions. Using two samples of workers in Germany we find that an increase in the regional share of highly qualified workers by one standard deviation is associated with between-job wage growth of about five per cent and with an increase in the annual probability of a job change of about sixty per cent. Wage gains are incurred only by workers changing jobs within industries. We find highly qualified workers in skilled regions to respond to these wage differentials by changing jobs more often within rather than between industries. Taken together, these findings suggest that human capital externalities partly arise because workers in skilled regions have better access to labour market information, which allows them to capitalize on their industry-specific knowledge when changing jobs.
High Speed Travelling Wave Single-Photon Detectors With Near-Unity Quantum Efficiency
Pernice, W; Minaeva, O; Li, M; Goltsman, G N; Sergienko, A V; Tang, H X
2011-01-01
Ultrafast, high quantum efficiency single photon detectors are among the most sought-after elements in modern quantum optics and quantum communication. Close-to-unity photon detection efficiency is essential for scalable measurement-based quantum computation, quantum key distribution, and loophole-free Bell experiments. However, imperfect modal matching and finite photon absorption rates have usually limited the maximum attainable detection efficiency of single photon detectors. Here we demonstrate a superconducting nanowire detector atop nanophotonic waveguides and achieve single photon detection efficiency up to 94% at telecom wavelengths. Our detectors are fully embedded in a scalable, low loss silicon photonic circuit and provide ultrashort timing jitter of 18ps at multi-GHz detection rates. Exploiting this high temporal resolution we demonstrate ballistic photon transport in silicon ring resonators. The direct implementation of such a detector with high quantum efficiency, high detection speed and low ji...
Quantum Efficiency Measurements of Femtosecond Vectorial Photoemission on Cu Photocathodes
Banfi, F; Galimberti, P G; Giannetti, C; Pagliara, S; Parmigiani, F; Pedersoli, E
2005-01-01
Quantum Efficiency (QE) measurements of single photon photoemission from a Cu(111) single crystal and a Cu polycrystal photocathodes, irradiated by 150~fs-6.28~eV laser pulses, are reported over a broad range of incidence angle in both s and p polarizations. The maximum value of QE for the Cu polycrystal sample is Y~4*10(-4), obtained with p polarization at an angle of incidence theta=65°. Our data confirm the vectorial photoemission model. Issues concerning surface roughness and symmetry considerations are addressed. An explanation in terms of non local conductivity tensor is proposed. Advantages of a 6.28~eV photon as compared to the standard 4.71~eV photon in use with Cu photocathodes are discussed.
A concise quantum efficiency measurement system for gaseous photomultipliers
Energy Technology Data Exchange (ETDEWEB)
Moriya, Toru [Department of Physics, Yamagata University, Yamagata 990-8560 (Japan); Tokanai, Fuyuki, E-mail: tokanai@sci.kj.yamagata-u.ac.jp [Department of Physics, Yamagata University, Yamagata 990-8560 (Japan); Okazaki, Keisuke; Sakurai, Hirohisa; Gunji, Shuichi [Department of Physics, Yamagata University, Yamagata 990-8560 (Japan); Kawabata, Hironobu; Sohtome, Takayuki [BUNKOUKEIKI Co., Ltd., Hachioji, Tokyo 192-0033 (Japan); Sumiyoshi, Takayuki [Graduate School of the Faculty of Science and Engineering, Tokyo Metropolitan University, Tokyo 192-0397 (Japan); Sugiyama, Hirioyuki; Okada, Teruyuki; Ohishi, Noboru [Electron Tube Division, Hamamatsu Photonics K.K., Shizuoka 438-0193 (Japan); Kishimoto, Syunji [Institute of Material Structure Science, KEK, Tsukuba 305-0801 (Japan)
2013-12-21
We have been developing gaseous photomultiplier tubes (PMTs) with a bialkali photocathode combined with micropattern gas detectors (MPGDs). The sensitivity of a PMT is described in terms of its quantum efficiency (QE). The QE is very important in many experiments, particularly when dealing with low photon statistics. A concise QE measurement system has been developed to evaluate the characteristics of a sealed gaseous PMT with a bialkali photocathode. This QE measurement system consists of a Xe arc lamp source, reflective optics and filters, a monochromator, and a reference Si photodiode detector. Using the system, we evaluated the QE, gain, and long-term stability of the gaseous PMT. Here, we report the results of our evaluation.
Efficient Design of Reversible Multiplexers with Low Quantum Cost
Directory of Open Access Journals (Sweden)
Ashima Malhotra
2014-07-01
Full Text Available Multiplexing is the generic term used to designate the operation of sending one or more analogue or digital signals over a common transmission line at dissimilar times or speeds and as such, the scheme we use to do just that is called a Multiplexer. In digital electronics, multiplexers are similarly known as data selectors as they can “select” each input line, are made from individual Analogue Switches encased in a single IC package as conflicting to the “mechanical” type selectors such as standard conservative switches and relays. In today era, reversibility has become essential part of digital world to make digital circuits more efficient. In this paper, we have proposed a new method to reduce quantum cost and power for various multiplexers. The results are simulated in Xilinx by using VHDL language.
External cavity tunable quantum cascade lasers and their applications to trace gas monitoring.
Rao, Gottipaty N; Karpf, Andreas
2011-02-01
Since the first quantum cascade laser (QCL) was demonstrated approximately 16 years ago, we have witnessed an explosion of interesting developments in QCL technology and QCL-based trace gas sensors. QCLs operate in the mid-IR region (3-24 μm) and can directly access the rotational vibrational bands of most molecular species and, therefore, are ideally suited for trace gas detection with high specificity and sensitivity. These sensors have applications in a wide range of fields, including environmental monitoring, atmospheric chemistry, medical diagnostics, homeland security, detection of explosive compounds, and industrial process control, to name a few. Tunable external cavity (EC)-QCLs in particular offer narrow linewidths, wide ranges of tunability, and stable power outputs, which open up new possibilities for sensor development. These features allow for the simultaneous detection of multiple species and the study of large molecules, free radicals, ions, and reaction kinetics. In this article, we review the current status of EC-QCLs and sensor developments based on them and speculate on possible future developments.
Sindelka, Milan; Moiseyev, Nimrod
2006-04-27
We study a general problem of the translational/rotational/vibrational/electronic dynamics of a diatomic molecule exposed to an interaction with an arbitrary external electromagnetic field. The theory developed in this paper is relevant to a variety of specific applications, such as alignment or orientation of molecules by lasers, trapping of ultracold molecules in optical traps, molecular optics and interferometry, rovibrational spectroscopy of molecules in the presence of intense laser light, or generation of high order harmonics from molecules. Starting from the first quantum mechanical principles, we derive an appropriate molecular Hamiltonian suitable for description of the center of mass, rotational, vibrational, and electronic molecular motions driven by the field within the electric dipole approximation. Consequently, the concept of the Born-Oppenheimer separation between the electronic and the nuclear degrees of freedom in the presence of an electromagnetic field is introduced. Special cases of the dc/ac-field limits are then discussed separately. Finally, we consider a perturbative regime of a weak dc/ac field, and obtain simple analytic formulas for the associated Born-Oppenheimer translational/rotational/vibrational molecular Hamiltonian.
Energy Technology Data Exchange (ETDEWEB)
Phillips, Mark C. [Pacific Northwest National Laboratory, Richland, Washington; Brumfield, Brian E. [Pacific Northwest National Laboratory, Richland, Washington
2017-08-21
We demonstrate standoff detection of turbulent mixed-chemical plumes using a broadly-tunable external cavity quantum cascade laser (ECQCL). The ECQCL was directed through plumes of mixed methanol/ethanol vapor to a partially-reflective surface located 10 m away. The reflected power was measured as the ECQCL was swept over its tuning range of 930-1065 cm-1 (9.4-10.8 µm) at rates up to 200 Hz. Analysis of the transmission spectra though the plume was performed to determine chemical concentrations with time resolution of 0.005 s. Comparison of multiple spectral sweep rates of 2 Hz, 20 Hz, and 200 Hz shows that higher sweep rates reduce effects of atmospheric and source turbulence, resulting in lower detection noise and more accurate measurement of the rapidly-changing chemical concentrations. Detection sensitivities of 0.13 ppm*m for MeOH and 1.2 ppm*m for EtOH are demonstrated for a 200 Hz spectral sweep rate, normalized to 1 s detection time.
Institute of Scientific and Technical Information of China (English)
王慧云; 叶松; 刘天华; 李松; 胡荣璇; 王德平
2015-01-01
The Tb3+single-doped and Tb3+-Yb3+co-doped glass ceramics with the precipitation of CaF2, CaF2-SrF2 solid state solu-tion and SrF2 nanocrystals were designed and prepared by taking different amounts of CaF2 and SrF2 as the starting fluorides to inves-tigate the influence of the crystalline phase on the total quantum efficiency. The formation of the fluoride nanocrystals and the incor-poration of the doped rare earth ions into the fluoride nanocrystals were proved by the XRD measurement. The energy transfer from Tb3+to Yb3+was studied by the steady and time resolved spectra. The total internal quantum efficiencies were calculated based on the measured Tb3+lifetime, which was about 10.5%improved in the SrF2 nanocrystals precipitated glass ceramics compared with that in the CaF2 nanocrystals precipitated glass ceramics mainly due to the lower phonon energy environment. Meanwhile, the total external quantum efficiencies were evaluated with the integrating sphere measurement system, which were 18.6%, 19.3%and 24.4%, respec-tively, for the CaF2, CaF2-SrF2 and SrF2 nanocrystals precipitated glass ceramics. Additionally, obvious difference between the calcu-lated total internal quantum efficiency and the measured total external quantum efficiency was also discussed.
DEFF Research Database (Denmark)
Gregersen, Niels; Munsch, Mathieu; Malik, Nitin S.
2013-01-01
Efficient coupling between a localized quantum emitter and a well defined optical channel represents a powerful route to realize single-photon sources and spin-photon interfaces. The tailored fiber-like photonic nanowire embedding a single quantum dot has recently demonstrated an appealing potent....... A first implementation of this strategy has lead to an ultra-bright single-photon source with a first-lens external efficiency of 0.75 ± 0.1 and a predicted coupling to a Gaussian beam of 0.61 ± 0.08.......Efficient coupling between a localized quantum emitter and a well defined optical channel represents a powerful route to realize single-photon sources and spin-photon interfaces. The tailored fiber-like photonic nanowire embedding a single quantum dot has recently demonstrated an appealing...... potential. However, the device requires a delicate, sharp needle-like taper with performance sensitive to minute geometrical details. To overcome this limitation we demonstrate the photonic trumpet, exploiting an opposite tapering strategy. The trumpet features a strongly Gaussian far-field emission...
DEFF Research Database (Denmark)
Cheng, Haynes Pak Hay; Jensen, Ole Bjarlin; Tidemand-Lichtenberg, Peter;
2010-01-01
Using a tunable external cavity tapered diode laser (ECDL) pumped quasi-three-level Nd:YAG laser, a fivefold reduction in threshold and twofold increase in slope efficiency is demonstrated when compared to a traditional broad area diode laser pump source. A TEM00 power of 800 mW with 65% slope...... efficiency is obtained, the highest reported TEM00 power from any 946 nm Nd:YAG laser pumped by a single emitter diode laser pump source. A quantum efficiency of 0.85 has been estimated from experimental data using a simple quasi-three-level model. The reported value is in good agreement with published...... values, suggesting that the model is adequate. Improvement of the 946 nm laser due to the ECDL's narrow spectrum proves to be less significant when compared to its spatial quality, inferring a broad spectrum tapered diode laser pump source may be most practical. Experimental confirmation of such setup...
High-conjugation-efficiency aqueous CdSe quantum dots.
Au, Giang H T; Shih, Wan Y; Shih, Wei-Heng
2013-11-12
Quantum dots (QDs) are photoluminescent nanoparticles that can be directly or indirectly coupled with a receptor such as an antibody to specifically image a target biomolecule such as an antigen. Recent studies have shown that QDs can be directly made at room temperature and in an aqueous environment (AQDs) with 3-mercaptopropionic acid (MPA) as the capping ligand without solvent and ligand exchange typically required by QDs made by the organic solvent routes (OQDs). In this study, we have synthesized CdSe AQDs and compared their conjugation efficiency and imaging efficacy with commercial carboxylated OQDs in HT29 colon cancer cells using a primary antibody-biotinylated secondary antibody-streptavidin (SA) sandwich. We showed that the best imaging condition for AQDs occurred when one AQD was bound with 3 ± 0.3 SA with a nominal SA/AQD ratio of 4 corresponding to an SA conjugation efficiency of 75 ± 7.5%. In comparison, for commercial CdSe-ZnS OQDs to achieve 2.7 ± 0.4 bound SAs per OQD for comparable imaging efficacy a nominal SA/OQD ratio of 80 was needed corresponding to an SA conjugation efficiency of 3.4 ± 0.5% for CdSe-ZnS OQDs. The more than 10 times better SA conjugation efficiency of the CdSe AQDs as compared to that of the CdSe-ZnS OQDs was attributed to more capping molecules on the AQD surface as a result of the direct aqueous synthesis. More capping molecules on the AQD surface also allowed the SA-AQD conjugate to be stable in cell culture medium for more than three days without losing their staining capability in a flowing cell culture medium. In contrast, SA-OQD conjugates aggregated in cell culture medium and in phosphate buffer saline solution over time.
Wu, Zhizhang; Huang, Zhongyi
2016-07-01
In this paper, we consider the numerical solution of the one-dimensional Schrödinger equation with a periodic lattice potential and a random external potential. This is an important model in solid state physics where the randomness results from complicated phenomena that are not exactly known. Here we generalize the Bloch decomposition-based time-splitting pseudospectral method to the stochastic setting using the generalized polynomial chaos with a Galerkin procedure so that the main effects of dispersion and periodic potential are still computed together. We prove that our method is unconditionally stable and numerical examples show that it has other nice properties and is more efficient than the traditional method. Finally, we give some numerical evidence for the well-known phenomenon of Anderson localization.
Effect of finite phosphor thickness on detective quantum efficiency
Energy Technology Data Exchange (ETDEWEB)
Nishikawa, R.M.; Yaffe, M.J.; Holmes, R.B. (Univ. of Toronto (Canada))
1989-09-01
In this paper we describe theoretically the relationship between the finite thickness of a phosphor screen and its spatial-frequency-dependent detective quantum efficiency DQE(f-). The finite thickness of the screen causes a variation in both the total number of light quanta emitted from the screen in a burst from a given x-ray interaction and in the spatial distribution of the quanta within the light burst (i.e., shape or point spread function (PSF) of the light burst). The variation in magnitude of the burst gives rise to a spatial-frequency-independent reduction in DQE, characterized by the scintillation efficiency As. The variation in PSF causes a roll off in DQE with increasing spatial frequency which we have characterized by the function Rc(f). Both As and Rc(f) can be determined from the moments of the distribution of the spatial Fourier spectrum of light bursts emitted from the phosphor and thus they are related: As is a scaling factor for Rc(f). Our theory predicts that it is necessary for all light bursts which appear at the output to have the same magnitude to maximize As and the same shape to maximize Rc(f). These requirements can lead to the result that the fluorescent screen with the highest modulation transfer function will not necessarily have the highest DQE(f) even at high spatial frequencies.
Institute of Scientific and Technical Information of China (English)
DENG Fu-Guo; LONG Gui-Lu; WANG Yan; XIAO Li
2004-01-01
@@ The security of quantum communications lies in the capability of the legitimate parties to detect eavesdropping.Here we propose to use delayed measurement to increase the efficiency of protocols of quantum key distribution and quantum secret sharing that uses a random choice of measuring-basis. In addition to a higher efficiency,these measures also bring the benefit of much reduced amount of classical communications.
An Efficient Deterministic Quantum Algorithm for the Integer Square-free Decomposition Problem
Li, Jun; Peng, Xinhua; Du, Jiangfeng; Suter, Dieter
2011-01-01
Quantum computers are known to be qualitatively more powerful than classical computers, but so far only a small number of different algorithms have been discovered that actually use this potential. It would therefore be highly desirable to develop other types of quantum algorithms that widen the range of possible applications. Here we propose an efficient and deterministic quantum algorithm for finding the square-free part of a large integer - a problem for which no efficient classical algori...
An Efficient Exact Quantum Algorithm for the Integer Square-free Decomposition Problem
Jun Li; Xinhua Peng; Jiangfeng Du; Dieter Suter
2012-01-01
Quantum computers are known to be qualitatively more powerful than classical computers, but so far only a small number of different algorithms have been discovered that actually use this potential. It would therefore be highly desirable to develop other types of quantum algorithms that widen the range of possible applications. Here we propose an efficient and exact quantum algorithm for finding the square-free part of a large integer - a problem for which no efficient classical algorithm exis...
Huang, Hailong; Zhao, Fangchao; Liu, Lige; Zhang, Feng; Wu, Xian-gang; Shi, Lijie; Zou, Bingsuo; Pei, Qibing; Zhong, Haizheng
2015-12-30
We report a facile nonaqueous emulsion synthesis of colloidal halide perovskite quantum dots by controlled addition of a demulsifier into an emulsion of precursors. The size of resulting CH3NH3PbBr3 quantum dots can be tuned from 2 to 8 nm by varying the amount of demulsifier. Moreover, this emulsion synthesis also allows the purification of these quantum dots by precipitation from the colloidal solution and obtains solid-state powder which can be redissolved for thin film coating and device fabrication. The photoluminescence quantum yields of the quantum dots is generally in the range of 80-92%, and can be well-preserved after purification (∼80%). Green light-emitting diodes fabricated comprising a spin-cast layer of the colloidal CH3NH3PbBr3 quantum dots exhibited maximum current efficiency of 4.5 cd/A, power efficiency of 3.5 lm/W, and external quantum efficiency of 1.1%. This provides an alternative route toward high efficient solution-processed perovskite-based light-emitting diodes. In addition, the emulsion synthesis is versatile and can be extended for the fabrication of inorganic halide perovskite colloidal CsPbBr3 nanocrystals.
Origin of low quantum efficiency of photoluminescence of InP/ZnS nanocrystals
DEFF Research Database (Denmark)
Shirazi, Roza; Kovacs, Andras; Corell, Dennis Dan
2013-01-01
In this paper, we study the origin of a strong wavelength dependence of the quantum efficiency of InP/ZnS nanocrystals. We find that while the average size of the nanocrystals increased by 50%, resulting in longer emission wavelength, the quantum efficiency drops more than one order of magnitude ...
Energy Technology Data Exchange (ETDEWEB)
Brumfield, Brian E.; Taubman, Matthew S.; Phillips, Mark C.; Suter, Jonathan D.
2016-07-01
The application of quantum cascade lasers (QCLs) in atmospheric science for trace detection of gases has been demonstrated using sensors in point or remote sensing configurations. Many of these systems utilize single narrowly-tunable (~10 cm-1) distributed feedback (DFB-) QCLs that limit simultaneous detection to a restricted number of small chemical species like H2O or N2O. The narrow wavelength range of DFB-QCLs precludes accurate quantification of large chemical species with broad rotationally-unresolved vibrational spectra, such as volatile organic compounds, that play an important role in the chemistry of the atmosphere. External-cavity (EC-) QCL systems are available that offer tuning ranges >100 cm-1, making them excellent IR sources for measuring multiple small and large chemical species in the atmosphere. While the broad wavelength coverage afforded by an EC system enables measurements of large chemical species, most commercial systems can only be swept over their entire wavelength range at less than 10 Hz. This prohibits broadband simultaneous measurements of multiple chemicals in plumes from natural or industrial sources where turbulence and/or chemical reactivity are resulting in rapid changes in chemical composition on sub-1s timescales. At Pacific Northwest National Laboratory we have developed rapidly-swept EC-QCL technology that acquires broadband absorption spectra (~100 cm-1) on ms timescales. The spectral resolution of this system has enabled simultaneous measurement of narrow rotationally-resolved atmospherically-broadened lines from small chemical species, while offering the broad tuning range needed to measure broadband spectral features from multiple large chemical species. In this talk the application of this technology for open-path atmospheric measurements will be discussed based on results from laboratory measurements with simulated plumes of chemicals. The performance offered by the system for simultaneous detection of multiple chemical
Lambrecht, Armin; Pfeifer, Marcel; Konz, Werner; Herbst, Johannes; Axtmann, Felix
2014-05-07
Laser spectroscopy is a powerful tool for analyzing small molecules, i.e. in the gas phase. In the mid-infrared spectral region quantum cascade lasers (QCLs) have been established as the most frequently used laser radiation source. Spectroscopy of larger molecules in the gas phase, of complex mixtures, and analysis in the liquid phase requires a broader tuning range and is thus still the domain of Fourier transform infrared (FTIR) spectroscopy. However, the development of tunable external cavity (EC) QCLs is starting to change this situation. The main advantage of QCLs is their high spectral emission power that is enhanced by a factor of 10(4) compared with thermal light sources. Obviously, transmission measurements with EC-QCLs in strongly absorbing samples are feasible, which can hardly be measured by FTIR due to detector noise limitations. We show that the high power of EC-QCLs facilitates spectroscopy beyond simple absorption measurements. Starting from QCL experiments with liquid samples, we show results of fiber evanescent field analysis (FEFA) to detect pesticides in drinking water. FEFA is a special case of attenuated total reflection spectroscopy. Furthermore, powerful CW EC-QCLs enable fast vibrational circular dichroism (VCD) spectroscopy of chiral molecules in the liquid phase - a technique which is very time consuming with standard FTIR equipment. We present results obtained for the chiral compound 1,1'-bi-2-naphthol (BINOL). Finally, powerful CW EC-QCLs enable the application of laser photothermal emission spectroscopy (LPTES). We demonstrate this for a narrowband and broadband absorber in the gas phase. All three techniques have great potential for MIR process analytical applications.
Ancilla-less selective and efficient quantum process tomography
Schmiegelow, Christian Tomás; Larotonda, Miguel Antonio; Paz, Juan Pablo
2011-01-01
Several methods, known as Quantum Process Tomography, are available to characterize the evolution of quantum systems, a task of crucial importance. However, their complexity dramatically increases with the size of the system. Here we present the theory describing a new type of method for quantum process tomography. We describe an algorithm that can be used to selectively estimate any parameter characterizing a quantum process. Unlike any of its predecessors this new quantum tomographer combines two main virtues: it requires investing a number of physical resources scaling polynomially with the number of qubits and at the same time it does not require any ancillary resources. We present the results of the first photonic implementation of this quantum device, characterizing quantum processes affecting two qubits encoded in heralded single photons. Even for this small system our method displays clear advantages over the other existing ones.
Near-unity quantum efficiency of broadband black silicon photodiodes with an induced junction
Juntunen, Mikko A.; Heinonen, Juha; Vähänissi, Ville; Repo, Päivikki; Valluru, Dileep; Savin, Hele
2016-12-01
Ideal photodiodes can detect all incoming photons independently of the wavelength, angle or intensity of the incident light. Present-day photodiodes notably suffer from optical losses and generated charge carriers are often lost via recombination. Here, we demonstrate a device with an external quantum efficiency above 96% over the wavelength range 250-950 nm. Instead of a conventional p-n junction, we use negatively charged alumina to form an inversion layer that generates a collecting junction extending to a depth of 30 µm in n-type silicon with bulk resistivity larger than 10 kΩ cm. We enhance the collection efficiency further by nanostructuring the photodiode surface, which results in higher effective charge density and increased charge-carrier concentration in the inversion layer. Additionally, nanostructuring and efficient surface passivation allow for a reliable device response with incident angles up to 70°. We expect the considered device to improve data quality, reduce the area of photodiodes as well as decrease the cost per pixel.
Detective quantum efficiency (DQE) in PET scanners: A simulation study.
Karpetas, George E; Michail, Christos M; Fountos, George P; Kalyvas, Nektarios I; Valais, Ioannis G; Kandarakis, Ioannis S; Panayiotakis, George S
2017-07-01
The aim of the present study is to introduce the detective quantum efficiency (DQE) for the image quality assessment of positron emission tomography (PET) scanners. For this purpose, a thin layer chromatography (TLC) plane source was simulated using a previously validated, scanner and source geometry, Monte Carlo (MC) model. The model was developed with the Geant4 application for tomographic emission (GATE) MC package and reconstructed images obtained with the software for tomographic image reconstruction (STIR), with cluster computing. The GE Discovery ST PET scanner was simulated by using a previously validated code. A plane source consisting of a TLC plate, was simulated by a layer of silica gel on aluminum (Al) foil substrate, immersed in 18F-FDG bath solution (1MBq). Image quality was assessed in terms of the modulation transfer function (MTF) and the normalized noise power spectrum (NNPS) in order to obtain the detective quantum efficiency (DQE). MTF curves were estimated from transverse reconstructed images of the plane source, whereas the NNPS data were estimated from the corresponding coronal images. Images were reconstructed by the maximum likelihood estimation ordered subsets maximum a posteriori one step late (MLE)-OS-MAP-OSL algorithm, by using various subsets 1-21) and iterations 1-20). MTF values were found to increase up to the 12th iteration whereas remain almost constant thereafter. However, the range of the increase in the MTF is limited as the number of subsets increases. The noise levels were found to increase with the corresponding increase of both the number of iterations and subsets. The maximum NNPS value (0.517mm(2)) was observed for the 420 MLEM-equivalent iterations reconstructed image at 0cycles/mm. Finally DQE values were found to increase for spatial frequencies up to 0.038cycles/mm and to decrease thereafter with the corresponding increase in both number of iterations and subsets. The maximum DQE value (0.48 at 0.038cycles/mm) was
Nikzad, Shouleh; Greer, Frank; Jones, Todd; Jacquot, Blake; Monacos, Steve; Blacksberg, J; Hamden, Erika; Schiminovich, David; Martin, Chris; Morrissey, Patrick
2011-01-01
We have used Molecular Beam Epitaxy (MBE)-based delta doping technology to demonstrate near 100% internal quantum efficiency (QE) on silicon electron-multiplied Charge Coupled Devices (EMCCDs) for single photon counting detection applications. Furthermore, we have used precision techniques for depositing antireflection (AR) coatings by employing Atomic Layer Deposition (ALD) and demonstrated over 50% external QE in the far and near-ultraviolet in megapixel arrays. We have demonstrated that other device parameters such as dark current are unchanged after these processes. In this paper, we report on these results and briefly discuss the techniques and processes employed.
Directory of Open Access Journals (Sweden)
M. Solaimani
2013-07-01
Full Text Available In this work, we have investigated the effect of an external magnetic field and, for the first time, number of wells with constant total effective length to study the degeneracy in electronic energy levels. We have used constant total effective length because it is technologically important. Then we have tried to remove the n-fold degeneracy of the n-well multiple quantum well by means of the external magnetic field but the two-fold degeneracy was remain and not removed. Finally, the effect of the external magnetic field on the number of bound states and the situation of unchanging absorption coefficient in a wide magnetic field interval are also investigated.
External electric field effect on exciton binding energy in InGaAsP/InP cylindrical quantum wires
Energy Technology Data Exchange (ETDEWEB)
Wang, Hailong, E-mail: hlwang@mail.qfnu.edu.cn [College of Physics and Engineering, Qufu Normal University, Qufu 273165 (China); Wang, Wenjuan [College of Physics and Engineering, Qufu Normal University, Qufu 273165 (China); Gong, Qian; Wang, Shumin [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China)
2016-12-15
Exciton binding energies in InGaAsP/InP cylindrical quantum wires are calculated through variational method under the framework of effective-mass envelope-function approximation. It is shown that the variation of exciton binding energy is highly dependent on radius of the wire, material composition and external electric field. Exciton binding energy is a non-monotonic function of wire radius. It increases until it reaches a maximum, and then decreases as the wire radius decreases. With the increase of In composition, the wire radius need increase to reach the maximum value of exciton binding energy. It is also found that the external electric field has little effect on exciton binding energy. However, the excitonic effect will be destroyed when external electric field is large enough. In addition, the Stark shift of exciton binding energy is also calculated.
Toward efficient fiber-based quantum interface (Conference Presentation)
Soshenko, Vladimir; Vorobyov, Vadim V.; Bolshedvorsky, Stepan; Lebedev, Nikolay; Akimov, Alexey V.; Sorokin, Vadim; Smolyaninov, Andrey
2016-04-01
NV center in diamond is attracting a lot of attention in quantum information processing community [1]. Been spin system in clean and well-controlled environment of diamond it shows outstanding performance as quantum memory even at room temperature, spin control with single shot optical readout and possibility to build up quantum registers even on single NV center. Moreover, NV centers could be used as high-resolution sensitive elements of detectors of magnetic or electric field, temperature, tension, force or rotation. For all of these applications collection of the light emitted by NV center is crucial point. There were number of approaches suggested to address this issue, proposing use of surface plasmoms [2], manufacturing structures in diamond [3] etc. One of the key feature of any practically important interface is compatibility with the fiber technology. Several groups attacking this problem using various approaches. One of them is placing of nanodiamonds in the holes of photonic crystal fiber [4], another is utilization of AFM to pick and place nanodiamond on the tapered fiber[5]. We have developed a novel technique of placing a nanodiamond with single NV center on the tapered fiber by controlled transfer of a nanodiamond from one "donor" tapered fiber to the "target" clean tapered fiber. We verify our ability to transfer only single color centers by means of measurement of second order correlation function. With this technique, we were able to double collection efficiency of confocal microscope. The majority of the factors limiting the collection of photons via optical fiber are technical and may be removed allowing order of magnitude improved in collection. We also discuss number of extensions of this technique to all fiber excitation and integration with nanostructures. References: [1] Marcus W. Doherty, Neil B. Manson, Paul Delaney, Fedor Jelezko, Jörg Wrachtrup, Lloyd C.L. Hollenberg , " The nitrogen-vacancy colour centre in diamond," Physics Reports
Lunnemann, Per; van Dijk-Moes, Relinde J A; Pietra, Francesca; Vanmaekelbergh, Daniël; Koenderink, A Femius
2013-01-01
We demonstrate that a simple silver coated ball lens can be used to accurately measure the entire distribution of radiative transition rates of quantum dot nanocrystals. This simple and cost-effective implementation of Drexhage's method that uses nanometer-controlled optical mode density variations near a mirror, not only allows to extract calibrated ensemble-averaged rates, but for the first time also to quantify the full inhomogeneous dispersion of radiative and non radiative decay rates across thousands of nanocrystals. We apply the technique to novel ultra-stable CdSe/CdS dot-in-rod emitters. The emitters are of large current interest due to their improved stability and reduced blinking. We retrieve a room-temperature ensemble average quantum efficiency of 0.87+-0.08 at a mean lifetime around 20 ns. We confirm a log-normal distribution of decay rates as often assumed in literature and we show that the rate distribution-width, that amounts to about 30% of the mean decay rate, is strongly dependent on the l...
Fu, Jian
2010-01-01
We demonstrate that a tensor product structure could be obtained by introducing pseudorandom phase sequences into classical fields with two orthogonal modes. Using classical fields modulated with pseudorandom phase sequences, we discuss efficient simulation of several typical quantum states, including product state, Bell states, GHZ state, and W state. By performing quadrature demodulation scheme, we could obtain the mode status matrix of the simulating classical fields, based on which we propose a sequence permutation mechanism to reconstruct the simulated quantum states. The research on classical simulation of quantum states is important, for it not only enables potential practical applications in quantum computation, but also provides useful insights into fundamental concepts of quantum mechanics.
Directory of Open Access Journals (Sweden)
Wang S
2016-01-01
Full Text Available Shuo Wang, Wanming Li, Dezheng Yuan, Jindan Song, Jin Fang Department of Cell Biology, Key Laboratory of Cell Biology, Ministry of Public Health, and Key Laboratory of Medical Cell Biology, Ministry of Education, China Medical University, Shenyang, People’s Republic of China Abstract: The large external antigen (LEA is a cell surface glycoprotein that has been proven to be highly expressed in colorectal cancer (CRC as a tumor-associated antigen. To evaluate and validate the relationship between LEA expression and clinical characteristics of CRC with high efficiency, LEA expression levels were detected in 85 tissue blocks from CRC patients by quantum dot-based immunohistochemistry (QD-IHC combined with imaging quantitative analysis using quantum dots with a 605 nm emission wavelength (QD605 conjugated to an ND-1 monoclonal antibody against LEA as a probe. Conventional IHC was performed in parallel for comparison. Both QD-IHC and conventional IHC showed that LEA was specifically expressed in CRC, but not in non-CRC tissues, and high LEA expression was significantly associated with a more advanced T-stage (P<0.05, indicating that LEA is likely to serve as a CRC prognostic marker. Compared with conventional IHC, receiver operating characteristic analysis revealed that QD-IHC possessed higher sensitivity, resulting in an increased positive detection rate of CRC, from 70.1% to 89.6%. In addition, a simpler operation, objective analysis of results, and excellent repeatability make QD-IHC an attractive alternative to conventional IHC in clinical practice. Furthermore, to explore whether the QD probes can be utilized to quantitatively detect living cells or single cells, quantum dot-based immunocytochemistry (QD-ICC combined with imaging quantitative analysis was developed to evaluate LEA expression in several CRC cell lines. It was demonstrated that QD-ICC could also predict the correlation between LEA expression and the T-stage characteristics of
Measuring the absolute quantum efficiency of luminescent materials
Energy Technology Data Exchange (ETDEWEB)
Rohwer, Lauren Shea [Sandia National Laboratories, P.O. Box 5800, MS-0892, Albuquerque, NM 87185-0892 (United States)]. E-mail: leshea@sandia.gov; Martin, James E. [Sandia National Laboratories, P.O. Box 5800, MS-0892, Albuquerque, NM 87185-0892 (United States)
2005-11-15
A measurement system and mathematical procedure are developed for determining the absolute quantum efficiency (QE), of luminescent materials. This technique, based on absorption of diffuse light within an integrating sphere, is applied to fluorescent laser dyes and conventional phosphor powders. The system described is tested for excitation in the near-UV and blue regions, but can be applied to higher energy excitation (UV), as well as lower energy excitation in the visible to near-IR, with the appropriate photodetectors and optical filters. The system was tested on both liquid and solid samples such as Coumarin 500 (CM500) dye in methanol and ethyl acetate; Rhodamine 6G in ethanol; and a variety of powder phosphors. The QE of quinine sulfate dihydrate solution (5x10{sup -3} M in 0.1 N H{sub 2}SO{sub 4}), a NIST fluorescence standard, was found to be in good agreement with the NIST value under 390 nm excitation. The accuracy of this measurement technique is acceptable for samples with absorption cross sections greater than {approx}6 mm{sup 2}.
Effects of image processing on the detective quantum efficiency
Park, Hye-Suk; Kim, Hee-Joung; Cho, Hyo-Min; Lee, Chang-Lae; Lee, Seung-Wan; Choi, Yu-Na
2010-04-01
Digital radiography has gained popularity in many areas of clinical practice. This transition brings interest in advancing the methodologies for image quality characterization. However, as the methodologies for such characterizations have not been standardized, the results of these studies cannot be directly compared. The primary objective of this study was to standardize methodologies for image quality characterization. The secondary objective was to evaluate affected factors to Modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) according to image processing algorithm. Image performance parameters such as MTF, NPS, and DQE were evaluated using the international electro-technical commission (IEC 62220-1)-defined RQA5 radiographic techniques. Computed radiography (CR) images of hand posterior-anterior (PA) for measuring signal to noise ratio (SNR), slit image for measuring MTF, white image for measuring NPS were obtained and various Multi-Scale Image Contrast Amplification (MUSICA) parameters were applied to each of acquired images. In results, all of modified images were considerably influence on evaluating SNR, MTF, NPS, and DQE. Modified images by the post-processing had higher DQE than the MUSICA=0 image. This suggests that MUSICA values, as a post-processing, have an affect on the image when it is evaluating for image quality. In conclusion, the control parameters of image processing could be accounted for evaluating characterization of image quality in same way. The results of this study could be guided as a baseline to evaluate imaging systems and their imaging characteristics by measuring MTF, NPS, and DQE.
Effects of image processing on the detective quantum efficiency
Energy Technology Data Exchange (ETDEWEB)
Park, Hye-Suk; Kim, Hee-Joung; Cho, Hyo-Min; Lee, Chang-Lae; Lee, Seung-Wan; Choi, Yu-Na [Yonsei University, Wonju (Korea, Republic of)
2010-02-15
The evaluation of image quality is an important part of digital radiography. The modulation transfer function (MTF), the noise power spectrum (NPS), and the detective quantum efficiency (DQE) are widely accepted measurements of the digital radiographic system performance. However, as the methodologies for such characterization have not been standardized, it is difficult to compare directly reported the MTF, NPS, and DQE results. In this study, we evaluated the effect of an image processing algorithm for estimating the MTF, NPS, and DQE. The image performance parameters were evaluated using the international electro-technical commission (IEC 62220-1)-defined RQA5 radiographic techniques. Computed radiography (CR) posterior-anterior (PA) images of a hand for measuring the signal to noise ratio (SNR), the slit images for measuring the MTF, and the white images for measuring the NPS were obtained, and various multi-Scale image contrast amplification (MUSICA) factors were applied to each of the acquired images. All of the modifications of the images obtained by using image processing had a considerable influence on the evaluated image quality. In conclusion, the control parameters of image processing can be accounted for evaluating characterization of image quality in same way. The results of this study should serve as a baseline for based on evaluating imaging systems and their imaging characteristics by MTF, NPS, and DQE measurements.
Detective quantum efficiency of electron area detectors in electron microscopy
Energy Technology Data Exchange (ETDEWEB)
McMullan, G., E-mail: gm2@mrc-lmb.cam.ac.uk [MRC Laboratory of Molecular Biology, Hills Road, Cambridge CB2 0QH (United Kingdom); Chen, S.; Henderson, R.; Faruqi, A.R. [MRC Laboratory of Molecular Biology, Hills Road, Cambridge CB2 0QH (United Kingdom)
2009-08-15
Recent progress in detector design has created the need for a careful side-by-side comparison of the modulation transfer function (MTF) and resolution-dependent detective quantum efficiency (DQE) of existing electron detectors with those of detectors based on new technology. We present MTF and DQE measurements for four types of detector: Kodak SO-163 film, TVIPS 224 charge coupled device (CCD) detector, the Medipix2 hybrid pixel detector, and an experimental direct electron monolithic active pixel sensor (MAPS) detector. Film and CCD performance was measured at 120 and 300 keV, while results are presented for the Medipix2 at 120 keV and for the MAPS detector at 300 keV. In the case of film, the effects of electron backscattering from both the holder and the plastic support have been investigated. We also show that part of the response of the emulsion in film comes from light generated in the plastic support. Computer simulations of film and the MAPS detector have been carried out and show good agreement with experiment. The agreement enables us to conclude that the DQE of a backthinned direct electron MAPS detector is likely to be equal to, or better than, that of film at 300 keV.
Detective quantum efficiency of electron area detectors in electron microscopy.
McMullan, G; Chen, S; Henderson, R; Faruqi, A R
2009-08-01
Recent progress in detector design has created the need for a careful side-by-side comparison of the modulation transfer function (MTF) and resolution-dependent detective quantum efficiency (DQE) of existing electron detectors with those of detectors based on new technology. We present MTF and DQE measurements for four types of detector: Kodak SO-163 film, TVIPS 224 charge coupled device (CCD) detector, the Medipix2 hybrid pixel detector, and an experimental direct electron monolithic active pixel sensor (MAPS) detector. Film and CCD performance was measured at 120 and 300 keV, while results are presented for the Medipix2 at 120 keV and for the MAPS detector at 300 keV. In the case of film, the effects of electron backscattering from both the holder and the plastic support have been investigated. We also show that part of the response of the emulsion in film comes from light generated in the plastic support. Computer simulations of film and the MAPS detector have been carried out and show good agreement with experiment. The agreement enables us to conclude that the DQE of a backthinned direct electron MAPS detector is likely to be equal to, or better than, that of film at 300 keV.
The Next Generation Photoinjector (thermal Emittance, Quantum Efficiency)
Palmer, D T
1998-01-01
This dissertation will elucidate the design, construction, theory, and operation of the Next Generation Photoinjector (NGP). This photoinjector is comprised of the BNL/SLAC/UCLA 1.6 cell symmetrized S-band photocathode radio frequency (rf) electron gun and a single emittance-compensation solenoidal magnet. This photoinjector is a prototype for the Linear Coherent Light Source X-ray Free Electron Laser operating in the 1.5 A range. Simulations indicate that this photoinjector is capable of producing a 1 nC electron bunch with transverse normalized emittance less than 1 $\\pi$ mm-mrad were the cathode is illuminated with a 10 psec longitudinal flat top pulse. Using a Gaussian longitudinal laser profile with a full width half maximum (FWHM) of 10 psec, simulation indicates that the NGP is capable of producing a normalized rms emittance of 2.50 $\\pi$ mm-mrad at 1 nC. Using the removable cathode plate we have studied the quantum efficiency (QE) of both copper and magnesium photo-cathodes...
An efficient quantum light-matter interface with sub-second lifetime
Yang, Sheng-Jun; Bao, Xiao-Hui; Pan, Jian-Wei
2015-01-01
Quantum repeater holds the promise for scalable long-distance quantum communication. Towards a first quantum repeater based on memory-photon entanglement, significant progresses have made in improving performances of the building blocks. Further development is hindered by the difficulty of integrating key capabilities such as long storage time and high memory efficiency into a single system. Here we report an efficient light-matter interface with sub-second lifetime by confining laser-cooled atoms with 3D optical lattice and enhancing the atom-photon coupling with a ring cavity. An initial retrieval efficiency of 76(5)% together with an 1/e lifetime of 0.22(1) s have been achieved simultaneously, which already support sub-Hz entanglement distribution up to 1000 km through quantum repeater. Together with an efficient telecom interface and moderate multiplexing, our result may enable a first quantum repeater system that beats direct transmission in the near future.
Popescu-Rohrlich correlations imply efficient instantaneous nonlocal quantum computation
Broadbent, Anne
2015-01-01
In instantaneous nonlocal quantum computation, two parties cooperate in order to perform a quantum computation on their joint inputs, while being restricted to a single round of simultaneous communication. Previous results showed that instantaneous nonlocal quantum computation is possible, at the cost of an exponential amount of prior shared entanglement (in the size of the input). Here, we show that a linear amount of entanglement suffices, (in the size of the computation), as long as the pa...
Lucas, William E.; Bonnell, Ian A.; Forgan, Duncan H.
2017-01-01
We investigate how star formation efficiency can be significantly decreased by the removal of a molecular cloud's envelope by feedback from an external source. Feedback from star formation has difficulties halting the process in dense gas but can easily remove the less dense and warmer envelopes where star formation does not occur. However, the envelopes can play an important role keeping their host clouds bound by deepening the gravitational potential and providing a constraining pressure boundary. We use numerical simulations to show that removal of the cloud envelopes results in all cases in a fall in the star formation efficiency (SFE). At 1.38 free-fall times our 4 pc cloud simulation experienced a drop in the SFE from 16 to six percent, while our 5 pc cloud fell from 27 to 16 per cent. At the same time, our 3 pc cloud (the least bound) fell from an SFE of 5.67 per cent to zero when the envelope was lost. The star formation efficiency per free-fall time varied from zero to ≈0.25 according to α, defined to be the ratio of the kinetic plus thermal to gravitational energy, and irrespective of the absolute star forming mass available. Furthermore the fall in SFE associated with the loss of the envelope is found to even occur at later times. We conclude that the SFE will always fall should a star forming cloud lose its envelope due to stellar feedback, with less bound clouds suffering the greatest decrease.
Lisi, A D; Illuminati, F; Vitali, D; Lisi, Antonio Di; Siena, Silvio De; Illuminati, Fabrizio; Vitali, David
2004-01-01
We introduce an efficient and robust scheme to generate maximally entangled states of two atomic ensembles. The scheme is based on quantum non-demolition measurements of total atomic populations and on quantum feedback conditioned by the measurements outputs. The high efficiency of the scheme is tested and confirmed numerically for photo-detection with ideal efficiency as well as in the presence of losses.
Efficient, tunable flip-chip-integrated III-V/Si hybrid external-cavity laser array.
Lin, Shiyun; Zheng, Xuezhe; Yao, Jin; Djordjevic, Stevan S; Cunningham, John E; Lee, Jin-Hyoung; Shubin, Ivan; Luo, Ying; Bovington, Jock; Lee, Daniel Y; Thacker, Hiren D; Raj, Kannan; Krishnamoorthy, Ashok V
2016-09-19
We demonstrate a surface-normal coupled tunable hybrid silicon laser array for the first time using passively-aligned, high-accuracy flip chip bonding. A 2x6 III-V reflective semiconductor optical amplifier (RSOA) array with integrated total internal reflection mirrors is bonded to a CMOS SOI chip with grating couplers and silicon ring reflectors to form a tunable hybrid external-cavity laser array. Waveguide-coupled wall plug efficiency (wcWPE) of 2% and output power of 3 mW has been achieved for all 12 lasers. We further improved the performance by reducing the thickness of metal/dielectric stacks and achieved 10mW output power and 5% wcWPE with the same integration techniques. This non-invasive, one-step back end of the line (BEOL) integration approach provides a promising solution to high density laser sources for future large-scale photonic integrated circuits.
Efficient and long-lived quantum memory with cold atoms inside a ring cavity
Bao, Xiao-Hui; Dietrich, Peter; Rui, Jun; Dück, Alexander; Strassel, Thorsten; Li, Li; Liu, Nai-Le; Zhao, Bo; Pan, Jian-Wei; 10.1038/nphys2324
2012-01-01
Quantum memories are regarded as one of the fundamental building blocks of linear-optical quantum computation and long-distance quantum communication. A long standing goal to realize scalable quantum information processing is to build a long-lived and efficient quantum memory. There have been significant efforts distributed towards this goal. However, either efficient but short-lived or long-lived but inefficient quantum memories have been demonstrated so far. Here we report a high-performance quantum memory in which long lifetime and high retrieval efficiency meet for the first time. By placing a ring cavity around an atomic ensemble, employing a pair of clock states, creating a long-wavelength spin wave, and arranging the setup in the gravitational direction, we realize a quantum memory with an intrinsic spin wave to photon conversion efficiency of 73(2)% together with a storage lifetime of 3.2(1) ms. This realization provides an essential tool towards scalable linear-optical quantum information processing.
Photo-acoustic spectroscopy and quantum efficiency of Yb{sup 3+} doped alumino silicate glasses
Energy Technology Data Exchange (ETDEWEB)
Kuhn, Stefan, E-mail: stefan.kuhn84@googlemail.com; Tiegel, Mirko; Herrmann, Andreas; Rüssel, Christian [Otto-Schott-Institute of Materials Research, Jena University, Fraunhoferstr. 6, 07743 Jena (Germany); Engel, Sebastian; Wenisch, Christoph; Gräf, Stephan; Müller, Frank A. [Otto-Schott-Institute of Materials Research, Jena University, Löbdergraben 32, 07743 Jena (Germany); Körner, Jörg; Seifert, Reinhard; Yue, Fangxin; Klöpfel, Diethardt [Institute of Optics and Quantum Electronics, Jena University, Max-Wien-Platz 1, 07743 Jena (Germany); Hein, Joachim; Kaluza, Malte C. [Institute of Optics and Quantum Electronics, Jena University, Max-Wien-Platz 1, 07743 Jena (Germany); Helmholtz-Institute Jena, Fröbelstieg 3, 07743 Jena (Germany)
2015-09-14
In this contribution, we analyze the effect of several preparation methods of Yb{sup 3+} doped alumino silicate glasses on their quantum efficiency by using photo-acoustic measurements in comparison to standard measurement methods including the determination via the fluorescence lifetime and an integrating sphere setup. The preparation methods focused on decreasing the OH concentration by means of fluorine-substitution and/or applying dry melting atmospheres, which led to an increase in the measured fluorescence lifetime. However, it was found that the influence of these methods on radiative properties such as the measured fluorescence lifetime alone does not per se give exact information about the actual quantum efficiency of the sample. The determination of the quantum efficiency by means of fluorescence lifetime shows inaccuracies when refractive index changing elements such as fluorine are incorporated into the glass. Since fluorine not only eliminates OH from the glass but also increases the “intrinsic” radiative fluorescence lifetime, which is needed to calculate the quantum efficiency, it is difficult to separate lifetime quenching from purely radiative effects. The approach used in this contribution offers a possibility to disentangle radiative from non-radiative properties which is not possible by using fluorescence lifetime measurements alone and allows an accurate determination of the quantum efficiency of a given sample. The comparative determination by an integrating sphere setup leads to the well-known problem of reabsorption which embodies itself in the measurement of too low quantum efficiencies, especially for samples with small quantum efficiencies.
Peng, Huiren; Jiang, Yibin; Chen, Shuming
2016-10-20
Colloidal quantum dot light-emitting diodes (QLEDs) are recognized as promising candidates for next generation displays. QLEDs can be fabricated by low-cost solution processing except for the metal electrodes, which, in general, are deposited by costly vacuum evaporation. To be fully compatible with the low-cost solution process, we herein demonstrate vacuum-free and solvent-free fabrication of electrodes using a printable liquid metal. With eutectic gallium-indium (EGaIn) based liquid metal cathodes, vacuum-free-processed QLEDs are demonstrated with superior external quantum efficiencies of 11.51%, 12.85% and 5.03% for red, green and blue devices, respectively, which are about 2-, 1.5- and 1.1-fold higher than those of the devices with thermally evaporated Al cathodes. The improved performance is attributable to the reduction of electron injection by the native oxide of EGaIn, which serves as an electron-blocking layer for the devices and thus improves the balance of carrier injection. Also, the T50 half-lifetime of the vacuum-free-processed QLEDs is about 2-fold longer than that of the devices with Al cathodes. Our results demonstrate that EGaIn-based solvent-free liquid metals are promising printable electrodes for realizing efficient, low-cost and vacuum-free-processed QLEDs. The elimination of vacuum and high-temperature processes significantly reduces the production cost and paves the way for industrial roll-to-roll manufacturing of large area displays.
An Efficient Exact Quantum Algorithm for the Integer Square-free Decomposition Problem.
Li, Jun; Peng, Xinhua; Du, Jiangfeng; Suter, Dieter
2012-01-01
Quantum computers are known to be qualitatively more powerful than classical computers, but so far only a small number of different algorithms have been discovered that actually use this potential. It would therefore be highly desirable to develop other types of quantum algorithms that widen the range of possible applications. Here we propose an efficient and exact quantum algorithm for finding the square-free part of a large integer - a problem for which no efficient classical algorithm exists. The algorithm relies on properties of Gauss sums and uses the quantum Fourier transform. We give an explicit quantum network for the algorithm. Our algorithm introduces new concepts and methods that have not been used in quantum information processing so far and may be applicable to a wider class of problems.
An Efficient Deterministic Quantum Algorithm for the Integer Square-free Decomposition Problem
Li, Jun; Du, Jiangfeng; Suter, Dieter
2011-01-01
Quantum computers are known to be qualitatively more powerful than classical computers, but so far only a small number of different algorithms have been discovered that actually use this potential. It would therefore be highly desirable to develop other types of quantum algorithms that widen the range of possible applications. Here we propose an efficient and deterministic quantum algorithm for finding the square-free part of a large integer - a problem for which no efficient classical algorithm exists. The algorithm relies on properties of Gauss sums and uses the quantum Fourier transform. We give an explicit quantum network for the algorithm. Our algorithm introduces new concepts and methods that have not been used in quantum information processing so far and may be applicable to a wider class of problems.
Quantum efficiency of InAs/InP nanowire heterostructures grown on silicon substrates
Energy Technology Data Exchange (ETDEWEB)
Anufriev, Roman; Chauvin, Nicolas; Bru-Chevallier, Catherine [Universite de Lyon, Institut des Nanotechnologies de Lyon (INL)-UMR5270-CNRS, INSA-Lyon, Villeurbanne (France); Khmissi, Hammadi [Universite de Monastir, Laboratoire de Micro-Optoelectronique et Nanostructures (LMON), Faculte des Sciences, Monastir (Tunisia); Naji, Khalid; Gendry, Michel [Universite de Lyon, Institut des Nanotechnologies de Lyon (INL)-UMR5270-CNRS, Ecole Centrale de Lyon, Ecully (France); Patriarche, Gilles [Laboratoire de Photonique et de Nanostructures (LPN), UPR20-CNRS, Marcoussis (France)
2013-10-15
Photoluminescence (PL) quantum efficiency (QE) is experimentally investigated, using an integrating sphere, as a function of excitation power on both InAs/InP quantum rod nanowires (QRod-NWs) and radial quantum well nanowires (QWell-NWs) grown on silicon substrates. The measured values of the QE are compared with those of the planar analogues such as quantum dash and quantum well samples, and found to be comparable for the quantum well structures at relatively low power density. Further studies reveal that the values of QE of the QRod-NWs and QWell-NWs are limited by the low quality of the InP NW structure and the quality of radial quantum well, respectively. (copyright 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)
A highly efficient single-photon source based on a quantum dot in a photonic nanowire
DEFF Research Database (Denmark)
Claudon, Julien; Bleuse, Joel; Malik, Nitin Singh
2010-01-01
The development of efficient solid-state sources of single photons is a major challenge in the context of quantum communication,optical quantum information processing and metrology1. Such a source must enable the implementation of a stable, single-photon emitter, like a colour centre in diamond2...... with carefully tailored ends13. Under optical pumping, we demonstrate a record source efficiency of 0.72, combined with pure single-photon emission. This non-resonant approach also provides broadband spontaneous emission control, thus offering appealing novel opportunities for the development of single-photon......–4 or a semiconductor quantum dot5–7. Achieving a high extraction efficiency has long been recognized as a major issue, and both classical solutions8 and cavity quantum electrodynamics effects have been applied1,9–12. We adopt a different approach, based on an InAs quantum dot embedded in a GaAs photonic nanowire...
Optimal efficiency of quantum transport in a disordered trimer.
Giusteri, Giulio G; Celardo, G Luca; Borgonovi, Fausto
2016-03-01
Disordered quantum networks, such as those describing light-harvesting complexes, are often characterized by the presence of peripheral ringlike structures, where the excitation is initialized, and inner structures and reaction centers (RCs), where the excitation is trapped and transferred. The peripheral rings often display distinguished coherent features: Their eigenstates can be separated, with respect to the transfer of excitation, into two classes of superradiant and subradiant states. Both are important to optimize transfer efficiency. In the absence of disorder, superradiant states have an enhanced coupling strength to the RC, while the subradiant ones are basically decoupled from it. Static on-site disorder induces a coupling between subradiant and superradiant states, thus creating an indirect coupling to the RC. The problem of finding the optimal transfer conditions, as a function of both the RC energy and the disorder strength, is very complex even in the simplest network, namely, a three-level system. In this paper we analyze such trimeric structure, choosing as the initial condition an excitation on a subradiant state, rather than the more common choice of an excitation localized on a single site. We show that, while the optimal disorder is of the order of the superradiant coupling, the optimal detuning between the initial state and the RC energy strongly depends on system parameters: When the superradiant coupling is much larger than the energy gap between the superradiant and the subradiant levels, optimal transfer occurs if the RC energy is at resonance with the subradiant initial state, whereas we find an optimal RC energy at resonance with a virtual dressed state when the superradiant coupling is smaller than or comparable to the gap. The presence of dynamical noise, which induces dephasing and decoherence, affects the resonance structure of energy transfer producing an additional incoherent resonance peak, which corresponds to the RC energy being
Modeling of detective quantum efficiency considering scatter-reduction devices
Energy Technology Data Exchange (ETDEWEB)
Park, Ji Woong; Kim, Dong Woon; Kim, Ho Kyung [Pusan National University, Busan (Korea, Republic of)
2016-05-15
The reduction of signal-to-noise ratio (SNR) cannot be restored and thus has become a severe issue in digital mammography.1 Therefore, antiscatter grids are typically used in mammography. Scatter-cleanup performance of various scatter-reduction devices, such as air gaps,2 linear (1D) or cellular (2D) grids,3, 4 and slot-scanning devices,5 has been extensively investigated by many research groups. In the present time, a digital mammography system with the slotscanning geometry is also commercially available.6 In this study, we theoretically investigate the effect of scattered photons on the detective quantum efficiency (DQE) performance of digital mammography detectors by using the cascaded-systems analysis (CSA) approach. We show a simple DQE formalism describing digital mammography detector systems equipped with scatter reduction devices by regarding the scattered photons as additive noise sources. The LFD increased with increasing PMMA thickness, and the amounts of LFD indicated the corresponding SF. The estimated SFs were 0.13, 0.21, and 0.29 for PMMA thicknesses of 10, 20, and 30 mm, respectively. While the solid line describing the measured MTF for PMMA with 0 mm was the result of least-squares of regression fit using Eq. (14), the other lines were simply resulted from the multiplication of the fit result (for PMMA with 0 mm) with the (1-SF) estimated from the LFDs in the measured MTFs. Spectral noise-power densities over the entire frequency range were not much changed with increasing scatter. On the other hand, the calculation results showed that the spectral noise-power densities increased with increasing scatter. This discrepancy may be explained by that the model developed in this study does not account for the changes in x-ray interaction parameters for varying spectral shapes due to beam hardening with increasing PMMA thicknesses.
Tsai, Yu-Lin; Lin, Chien-Chung; Han, Hau-Vei; Chen, Hsin-Chu; Chen, Kuo-Ju; Lai, Wei-Chi; Sheu, Jin-Kong; Lai, Fang-I.; Yu, Peichen; Kuo, Hao-Chung
2013-03-01
In recent year, InGaN-based alloy was also considered for photovoltaic devices owing to the distinctive material properties which are benefit photovoltaic performance. However, the Indium tin oxide (ITO) layer on top, which plays a role of transparent conductive oxide (TCO), can absorb UV photons without generating photocurrent. Also, the thin absorber layer in the device, which is consequent result after compromising with limited crystal quality, has caused insufficient light absorption. In this report, we propose an approach for solving these problems. A hybrid design of InGaN/GaN multiple quantum wells (MQWs) solar cells combined with colloidal CdS quantum dots (QDs) and back side distributed Bragg reflectors (DBRs) has been demonstrated. CdS QDs provide down-conversion effect at UV regime to avoid absorption of ITO. Moreover, CdS QDs also exhibit anti-reflective feature. DBRs at the back side have effectively reflected the light back into the absorber layer. CdS QDs enhance the external quantum efficiency (EQE) for light with wavelength shorter than 400 nm, while DBRs provide a broad band enhancement in EQE, especially within the region of 400 nm ~ 430 nm in wavelength. CdS QDs effectively achieved a power conversion efficiency enhancement as high as 7.2% compared to the device without assistance of CdS QDs. With the participation of DBRs, the power conversion efficiency enhancement has been further boosted to 14%. We believe that the hybrid design of InGaN/GaN MQWs solar cells with QDs and DBRs can be a method for high efficiency InGaN/GaN MQWs solar cells.
Directory of Open Access Journals (Sweden)
Ashley eYaugher
2015-10-01
Full Text Available Research on psychopathology and experimental studies of sleep restriction support a relationship between sleep disruption and both internalizing and externalizing disorders. The objective of the current study was to extend this research by examining sleep, impulsivity, antisocial personality traits, and internalizing traits in a university sample. Three hundred and eighty six individuals (161 males between the ages of 18 and 27 years (M = 18.59, SD = 0.98 wore actigraphs for 7 days and completed established measures of disorder-linked personality traits and sleep quality (i.e., Personality Assessment Inventory, Triarchic Psychopathy Measure, Barratt Impulsiveness Scale-11, and the Pittsburgh Sleep Quality Index. As expected, sleep measures and questionnaire scores fell within the normal range of values and sex differences in sleep and personality were consistent with previous research results. Similar to findings in predominantly male forensic psychiatric settings, higher levels of impulsivity predicted poorer subjective sleep quality in both women and men. Consistent with well-established associations between depression and sleep, higher levels of depression in both sexes predicted poorer subjective sleep quality. Bidirectional analyses showed that better sleep efficiency decreases depression. Finally, moderation analyses showed that gender does have a primary role in sleep efficiency and marginal effects were found. The observed relations between sleep and personality traits in a typical university sample add to converging evidence of the relationship between sleep and psychopathology and may inform our understanding of the development of psychopathology in young adulthood.
Efficient numerical solution of excitation number conserving quantum systems
Zhang, Zheyong; Ding, Jianping; Wang, Hui-Tian
2017-08-01
A system composed of a harmonic oscillator coupled to a two-level atom is one of the quantum systems, which can be completely solved. Although this system is simple, it is never a easy work for the quantum calculations, especially when the system consists of many such simple constituent parts. In this paper, we present a programming method, by which the calculation tasks for the matrix representation of the Hamiltonian of system can be automatically fulfilled. Coupled-cavity array systems are used to demonstrate our programming method. Some quantum properties of these systems are also discussed.
Efficient Computation of Transition State Resonances and Reaction Rates from a Quantum Normal Form
Schubert, Roman; Waalkens, Holger; Wiggins, Stephen
2006-01-01
A quantum version of a recent formulation of transition state theory in phase space is presented. The theory developed provides an algorithm to compute quantum reaction rates and the associated Gamov-Siegert resonances with very high accuracy. The algorithm is especially efficient for multi-degree-o
High Efficiency Quantum Well Waveguide Solar Cells Project
National Aeronautics and Space Administration — The long-term objective of this program is to develop flexible, lightweight, single-junction solar cells using quantum structured designs that can achieve ultra-high...
High efficiency detection technology on quantum action using radiation excitation
Energy Technology Data Exchange (ETDEWEB)
Okubo, Masataka; Ukibe, Masahiro; Sakamoto, Isao; Hayashi, Nobuyuki; Shoji, Akira; Kobayashi, Naoto [Electrotechnical Lab., Tsukuba, Ibaraki (Japan)
2000-02-01
In 1998 fiscal year, as a local quasi particle loss process, it was elucidated that there was a quasi particle loss induced with magnetic flux quantum trapped by a detector on its cooling. Hitherto, it was reported that action of a tunnel junction detector was different by its magnetic history. That is, the detector had unstability such as variation of its action on its cooling. Therefore, the quasi particle loss induced by magnetic flux quantum forming cause of the unstability was quantitatively evaluated. As a result, it was elucidated that output of the detector was reduced half only by trapping the magnetic flux quantum with numbers corresponding to weak magnetic field like geomagnetism. And, this phenomenon was also described by using a model concept with quasi particle trapping due to the magnetic flux quantum. (G.K.)
Efficient Quantum Information Transfer Through a Uniform Channel
Directory of Open Access Journals (Sweden)
Paola Verrucchi
2011-06-01
Full Text Available Effective quantum-state and entanglement transfer can be obtained by inducing a coherent dynamics in quantum wires with homogeneous intrawire interactions. This goal is accomplished by optimally tuning the coupling between the wire endpoints and the two qubits there attached. A general procedure to determine such value is devised, and scaling laws between the optimal coupling and the length of the wire are found. The procedure is implemented in the case of a wire consisting of a spin-1/2 XY chain: results for the time dependence of the quantities which characterize quantum-state and entanglement transfer are found of extremely good quality also for very long wires. The present approach does not require engineered intrawire interactions nor a specific initial pulse shaping, and can be applied to a vast class of quantum channels.
Qureshi, Mumnuna A.; Zhong, Johnny; Betouras, Joseph J.; Zagoskin, Alexandre M.
2017-03-01
Theoretical description and simulation of large quantum coherent systems out of equilibrium remains a daunting task. Here we are developing an approach to it based on the Pechukas-Yukawa formalism, which is especially convenient in the case of an adiabatically slow external perturbation, though it is not restricted to adiabatic systems. In this formalism the dynamics of energy levels in an externally perturbed quantum system as a function of the perturbation parameter is mapped on that of a fictitious one-dimensional classical gas of particles with cubic repulsion. Equilibrium statistical mechanics of this Pechukas gas allows us to reproduce the random matrix theory of energy levels. In the present work, we develop the nonequilibrium statistical mechanics of the Pechukas gas, starting with the derivation of the Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) chain of equations for the appropriate generalized distribution functions. Sets of approximate kinetic equations can be consistently obtained by breaking this chain at a particular point (i.e., approximating all higher-order distribution functions by the products of the lower-order ones). When complemented by the equations for the level occupation numbers and interlevel transition amplitudes, they allow us to describe the nonequilibrium evolution of the quantum state of the system, which can describe better a large quantum coherent system than the currently used approaches. In particular, we find that corrections to the factorized approximation of the distribution function scale as 1 /N , where N is the number of the "Pechukas gas particles" (i.e., energy levels in the system).
Baek, Se-Woong; Song, Jung Hoon; Choi, Woong; Song, Hyunjoon; Jeong, Sohee; Lee, Jung-Yong
2015-12-22
A new configuration of a plasmonic quantum dots solar structure is proposed. Gold-silver core-shell metal nanoparticles (Au@Ag NCs) are incorporated into the TiO2 layer (Au@Ag NCs-HL) of PbS-based solar cells. The TiO2 layer enables the Au@Ag NCs to have broad plasmonic responses and the external quantum efficiency and absorption of the plasmonic devices are significantly enhanced. The electrical performance of the solar cells is also improved. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Grahmann, Jan; Merten, André; Ostendorf, Ralf; Fontenot, Michael; Bleh, Daniela; Schenk, Harald; Wagner, Hans-Joachim
2014-03-01
In situ process information in the chemical, pharmaceutical or food industry as well as emission monitoring, sensitive trace detection and biological sensing applications would increasingly rely on MIR-spectroscopic analysis in the 3 μm - 12 μm wavelength range. However, cost effective, portable, low power consuming and fast spectrometers with a wide tuning range are not available so far. To provide these MIR-spectrometer properties, the combination of quantum cascade lasers with a MOEMS scanning grating as wavelength selective element in the external cavity is addressed to provide a very compact and fast tunable laser source for spectroscopic analysis.
1300 nm optically pumped quantum dot spin vertical external-cavity surface-emitting laser
Energy Technology Data Exchange (ETDEWEB)
Alharthi, S. S., E-mail: ssmalh@essex.ac.uk; Henning, I. D.; Adams, M. J. [School of Computer Science and Electronic Engineering, University of Essex, Wivenhoe Park, Colchester CO4 3SQ (United Kingdom); Orchard, J. [Department of Physics and Astronomy, University of Sheffield, Hounsfield Road, Sheffield S3 7RH (United Kingdom); Clarke, E. [EPSRC National Centre for III-V Technologies, University of Sheffield, Mappin Street, S1 3JD Sheffield (United Kingdom)
2015-10-12
We report a room temperature optically pumped Quantum Dot-based Spin-Vertical-External-Cavity Surface-Emitting laser (QD Spin-VECSEL) operating at the telecom wavelength of 1.3 μm. The active medium was composed of 5 × 3 QD layers; each threefold group was positioned at an antinode of the standing wave of the optical field. Circularly polarized lasing in the QD-VECSEL under Continuous-Wave optical pumping has been realized with a threshold pump power of 11 mW. We further demonstrate at room temperature control of the QD-VECSEL output polarization ellipticity via the pump polarization.
Institute of Scientific and Technical Information of China (English)
Wu Jian; Lü Xue-Qin; Jin Peng; Meng Xian-Quan; Wang Zhan-Guo
2011-01-01
A broadband tunable grating-coupled external cavity laser is realized by employing a self-assembled InAs/GaAs quantum-dot (QD) superluminescent diode (SLD) as the gain device. The SLD device is processed with a bent-waveguide structure and facet antireflection (AR) coating. Tuning bandwidths of 106 nm and 117 nm are achieved under 3-A and 3.5-A injection currents, respectively. The large tuning range originates essentially from the broad gain spectrum of self-assembled QDs. The bent waveguide structure combined with the facet AR coating plays a role in suppressing the inner-cavity lasing under a large injection current.
Institute of Scientific and Technical Information of China (English)
胡发杰; 金鹏; 吴艳华; 王飞飞; 魏恒; 王占国
2015-01-01
A wide wavelength tuning range swept external-cavity laser using an InAs/GaAs quantum-dot superluminescent diode as a gain device is demonstrated. The tunable filter consists of a polygon scanner and a grating in Littrow telescope-less configuration. The swept laser generates greater than 54-mW peak output power and up to 33-kHz sweep rate with a sweep range of 150 nm centered at 1155 nm. The effects of injection current and sweep rate on the sweep performance of the swept laser are studied.
Institute of Scientific and Technical Information of China (English)
Peng Feng
2003-01-01
The laser-field induced magnon amplification in a magnetic semiconductor quantum well under an external magnetic field was discussed, it is shown that when the laser frequency is near to the electron cyclotron frequency, no matter how weaker the laser field is, the magnon amplification always occurs. In case of fixed laser frequency, the optical absorption of magnons obeys the definite selection rule to the laser field strength. The rate of change of magnon occupation is calculated, and the amplification condition is given.
Mischenko, I.; Chuev, M.
2016-12-01
Principal difference of magnetic nanoparticles from the bulk matter which cannot be ignored when constructing upon them combined metamaterials and modern devices is the essential influence on their behavior thermal fluctuations of the environment. These disturbances lead to specific distributions of the particles characteristics and to stochastic reorientations of their magnetic moments. On the basis of quantum-mechanical representation of the particle possessing intrinsic magnetic anisotropy and being placed onto the external magnetic field we developed general approach to describe equilibrium magnetization curves and relaxation Mössbauer spectra of magnetic nanoparticles for diagnostics of magnetic nanomaterials in the whole temperature or external field ranges. This approach has universal character and may be applied not only to the systems under thermal equilibrium, but may in principle describe macroscopic dynamical phenomena such as magnetization reversal.
High Quantum Efficiency Type II SLS FPAs for Space-Based Applications Project
National Aeronautics and Space Administration — This Phase I SBIR proposes to develop high quantum efficiency (QE) and low dark current infrared epitaxy materials based on Type II Strained Layer Superlattice (SLS)...
High Efficiency Quantum Dot III-V Multijunction Solar Cell for Space Power Project
National Aeronautics and Space Administration — We are proposing to utilize quantum dots to develop a super high-efficiency multijunction III-V solar cell for space. In metamorphic triple junction space solar...
High Quantum Efficiency 1024x1024 Longwave Infrared SLS FPA and Camera Project
National Aeronautics and Space Administration — We propose a high quantum efficiency (QE) 1024x1024 longwave infrared focal plane array (LWIR FPA) and CAMERA with ~ 12 micron cutoff wavelength made from...
High Quantum Efficiency Type II SLS FPAs for Space-Based Applications Project
National Aeronautics and Space Administration — This Phase II SBIR proposes to develop high quantum efficiency (QE) and low dark current infrared epitaxy materials based on Type II Strained Layer Superlattice...
Response of a quantum system to a time-dependent external field and dynamical symmetry of the system
Wang, S J; Weiguny, A; Wiese, H
1998-01-01
The response of a quantum system to a time-dependent periodic external field is investigated in connection with the dynamical symmetry breaking and level dynamics of the adiabatic states of the system. The main results are as follows. (A) When the periodic external field preserves the dynamical symmetry of the system, its response is like that of elastic matter. (B) When the periodic external field breaks the dynamical symmetry, several cases may occur: (a) in the adiabatic limit, the system still responds elastically; (b) if the initial state is an eigenstate of the evolution operator U(T) for one period T of the external field, the system evolves in time cyclically and responds quasi-elastically; (c) if the initial state is not an eigenstate of the evolution operator U(T), the system evolves in time non-cyclically and responds non-elastically. The detailed non-elastic behaviour depends on the statistical nature of the adiabatic eigenstates of the system. If the adiabatic spectrum is chaotic, the non-elastic...
Liu, Guohong; Zhou, Xiang; Chen, Shuming
2016-07-01
The microcavity effect in top-emitting quantum dot light-emitting diodes (TQLEDs) is theoretically and experimentally investigated. By carefully optimizing the cavity length, the thickness of the top Ag electrode and the thickness of the capping layer, very bright and efficient TQLEDs with external quantum efficiency (EQE) of 12.5% are demonstrated. Strong dependence of luminance and efficiency on cavity length is observed, in good agreement with theoretical calculation. By setting the normal-direction resonant wavelength around the peak wavelength of the intrinsic emission, highest luminance of 112 000 cd/m(2) (at a driving voltage of 7 V) and maximum current efficiency of 27.8 cd/A are achieved, representing a 12-fold and a 2.1-fold enhancement compared to 9000 cd/m(2) and 13.2 cd/A of the conventional bottom emitting devices, respectively, whereas the highest EQE of 12.5% is obtained by setting the resonant wavelength 30 nm longer than the peak wavelength of the intrinsic emission. Benefit from the very narrow spectrum of QDs and the low absorption of silver electrodes, the potential of microcavity effect can be fully exploited in TQLEDs.
Yang, Yuzhao; Lin, Xiaofeng; Li, Wenlang; Ou, Jiemei; Yuan, Zhongke; Xie, Fangyan; Hong, Wei; Yu, Dingshan; Ma, Yuguang; Chi, Zhenguo; Chen, Xudong
2017-05-03
Cathode interlayers (CILs) with low-cost, low-toxicity, and excellent cathode modification ability are necessary for the large-scale industrialization of polymer solar cells (PSCs). In this contribution, we demonstrated one-pot synthesized carbon quantum dots (C-dots) with high production to serve as efficient CIL for inverted PSCs. The C-dots were synthesized by a facile, economical microwave pyrolysis in a household microwave oven within 7 min. Ultraviolet photoelectron spectroscopy (UPS) studies showed that the C-dots possessed the ability to form a dipole at the interface, resulting in the decrease of the work function (WF) of cathode. External quantum efficiency (EQE) measurements and 2D excitation-emission topographical maps revealed that the C-dots down-shifted the high energy near-ultraviolet light to low energy visible light to generate more photocurrent. Remarkably improvement of power conversion efficiency (PCE) was attained by incorporation of C-dots as CIL. The PCE was boosted up from 4.14% to 8.13% with C-dots as CIL, which is one of the best efficiency for i-PSCs used carbon based materials as interlayers. These results demonstrated that C-dots can be a potential candidate for future low cost and large area PSCs producing.
Abe, Sumiyoshi; Okuyama, Shinji
2012-01-01
The role of the superposition principle is discussed for the quantum-mechanical Carnot engine introduced by Bender, Brody, and Meister [J. Phys. A 33, 4427 (2000)]. It is shown that the efficiency of the engine can be enhanced by the superposition of quantum states. A finite-time process is also discussed and the condition of the maximum power output is presented. Interestingly, the efficiency at the maximum power is lower than that without superposition.
DEFF Research Database (Denmark)
Radko, Ilya; Boll, Mads; Israelsen, Niels Møller
2016-01-01
It is generally accepted that nitrogen-vacancy (NV) defects in bulk diamond are bright sources of luminescence. However, the exact value of their internal quantum efficiency (IQE) has not been measured so far. Here we use an implementation of Drexhage's scheme to quantify the IQE of shallow...... the quantum efficiency to be 0.70 ± 0.07 and 0.82 ± 0.08, respectively....
Lee, Joo Hyung; Yang, Eui Yeol; Oh, Se Young
2013-03-01
In previous work, we have reported that a P3HT:PCBM-based organic photovoltaic cell using a thermally evaporated DMDCNQI buffer layer shows a high power conversion efficiency. In the present work, we have fabricated organic photovoltaic cells consisting of ITO/PEDOT:PSS/P3HT:PCBM:DMDCNQI/DMDCNQI/Al using an all-solution process. A thin, uniform DMDCNQI film was obtained in a methanol solution with high solubility and low viscosity. The prepared device shows a high power conversion efficiency of 2.9%. In particular, a maximum external quantum efficiency of 81% was obtained.
Quantum transport of the semiconductor pump: Due to an axial external field
Energy Technology Data Exchange (ETDEWEB)
Xiao, Yun-Chang, E-mail: phyxiaofan@163.com [College of Electrical and Information Engineering, Hunan University of Arts and Science, Changde 415000 (China); Wang, Ri-Xing, E-mail: wangrixing@sina.com [College of Electrical and Information Engineering, Hunan University of Arts and Science, Changde 415000 (China); Deng, Wei-Ying, E-mail: weiyindeng@gmail.com [Department of Physics, South China University of Technology, Guangzhou 510640 (China)
2014-09-15
Parametric semiconductor pump modulated by the external field is investigated. The pump center attaching to two normal leads is driven by the potentials formed in the interfaces. With the Floquet scattering matrix method, the pumped currents modulated by the parameters are studied. Results reveal that the charge and spin currents pumped from the system can be strengthen by the external field besides the potentials. Directed spin currents can be pumped more strongly than the charge currents, and even the pure spin currents can be achieved in some external field couplings to the pump parameters.
Vahlbruch, Henning; Mehmet, Moritz; Danzmann, Karsten; Schnabel, Roman
2016-09-01
Squeezed states of light belong to the most prominent nonclassical resources. They have compelling applications in metrology, which has been demonstrated by their routine exploitation for improving the sensitivity of a gravitational-wave detector since 2010. Here, we report on the direct measurement of 15 dB squeezed vacuum states of light and their application to calibrate the quantum efficiency of photoelectric detection. The object of calibration is a customized InGaAs positive intrinsic negative (p-i-n) photodiode optimized for high external quantum efficiency. The calibration yields a value of 99.5% with a 0.5% (k =2 ) uncertainty for a photon flux of the order 1 017 s-1 at a wavelength of 1064 nm. The calibration neither requires any standard nor knowledge of the incident light power and thus represents a valuable application of squeezed states of light in quantum metrology.
Characterization of Si nanostructures using internal quantum efficiency measurements
Energy Technology Data Exchange (ETDEWEB)
ZAIDI,SALEEM H.
2000-04-01
Hemispherical reflectance and internal quantum efficiency measurements have been employed to evaluate the response of Si nanostructured surfaces formed by using random and periodic reactive ion etching techniques. Random RIE-textured surfaces have demonstrated solar weighted reflectance of {approx} 3% over 300--1,200-nm spectral range even without the benefit of anti-reflection films. Random RIE-texturing has been found to be applicable over large areas ({approximately} 180 cm{sup 2}) of both single and multicrystalline Si surfaces. Due to the surface contamination and plasma-induced damage, RIE-textured surfaces did not initially provide increased short circuit current as expected from the enhanced absorption. Improved processing combined with wet-chemical damage removal etches resulted in significant improvement in the short circuit current with IQEs comparable to the random, wet-chemically textured surfaces. An interesting feature of the RIE-textured surfaces was their superior performance in the near IR spectral range. The response of RIE-textured periodic surfaces can be broadly classified into three distinct regimes. One-dimensional grating structures with triangular profiles are characterized by exceptionally low, polarization-independent reflective behavior. The reflectance response of such surfaces is similar to a graded-index anti-reflection film. The IQE response from these surfaces is severely degraded in the UV-Visible spectral region due to plasma-induced surface damage. One-dimensional grating structures with rectangular profiles exhibit spectrally selective absorptive behavior with somewhat similar IQE response. The third type of grating structure combines broadband anti-reflection behavior with significant IQE enhancement in 800--1,200-nm spectral region. The hemispherical reflectance of these 2D grating structures is comparable to random RIE-textured surfaces. The IQE enhancement in the long wavelength spectral region can be attributed to
Towards Realising Secure and Efficient Image and Video Processing Applications on Quantum Computers
Directory of Open Access Journals (Sweden)
Abdullah M. Iliyasu
2013-07-01
Full Text Available Exploiting the promise of security and efficiency that quantum computing offers, the basic foundations leading to commercial applications for quantum image processing are proposed. Two mathematical frameworks and algorithms to accomplish the watermarking of quantum images, authentication of ownership of already watermarked images and recovery of their unmarked versions on quantum computers are proposed. Encoding the images as 2n-sized normalised Flexible Representation of Quantum Images (FRQI states, with n-qubits and 1-qubit dedicated to capturing the respective information about the colour and position of every pixel in the image respectively, the proposed algorithms utilise the flexibility inherent to the FRQI representation, in order to confine the transformations on an image to any predetermined chromatic or spatial (or a combination of both content of the image as dictated by the watermark embedding, authentication or recovery circuits. Furthermore, by adopting an apt generalisation of the criteria required to realise physical quantum computing hardware, three standalone components that make up the framework to prepare, manipulate and recover the various contents required to represent and produce movies on quantum computers are also proposed. Each of the algorithms and the mathematical foundations for their execution were simulated using classical (i.e., conventional or non-quantum computing resources, and their results were analysed alongside other longstanding classical computing equivalents. The work presented here, combined together with the extensions suggested, provide the basic foundations towards effectuating secure and efficient classical-like image and video processing applications on the quantum-computing framework.
Labelle, A. J.
2017-02-03
The engineering of broadband absorbers to harvest white light in thin-film semiconductors is a major challenge in developing renewable materials for energy harvesting. Many solution-processed materials with high manufacturability and low cost, such as semiconductor quantum dots, require the use of film structures with thicknesses on the order of 1 μm to absorb incoming photons completely. The electron transport lengths in these media, however, are 1 order of magnitude smaller than this length, hampering further progress with this platform. Herein, we show that, by engineering suitably disordered nanoplasmonic structures, we have created a new class of dispersionless epsilon-near-zero composite materials that efficiently harness white light. Our nanostructures localize light in the dielectric region outside the epsilon-near-zero material with characteristic lengths of 10-100 nm, resulting in an efficient system for harvesting broadband light when a thin absorptive film is deposited on top of the structure. By using a combination of theory and experiments, we demonstrate that ultrathin layers down to 50 nm of colloidal quantum dots deposited atop the epsilon-near-zero material show an increase in broadband absorption ranging from 200% to 500% compared to a planar structure of the same colloidal quantum-dot-absorber average thickness. When the epsilon-near-zero nanostructures were used in an energy-harvesting module, we observed a spectrally averaged 170% broadband increase in the external quantum efficiency of the device, measured at wavelengths between 400 and 1200 nm. Atomic force microscopy and photoluminescence excitation measurements demonstrate that the properties of these epsilon-near-zero structures apply to general metals and could be used to enhance the near-field absorption of semiconductor structures more widely. We have developed an inexpensive electrochemical deposition process that enables scaled-up production of this nanomaterial for large
Efficiency and Coherence of Quantum-Dot Single-Photon Sources
DEFF Research Database (Denmark)
Madsen, Marta Arcari
The main goal of the project has been to realize an efficient source of coherent single photons by coupling a self-assembled quantum dot to a photonic crystal waveguide. Such a source would have a wide range of applications in the field of quantum information processing. By studying the coupling...... on this result, we improved the design of the photonic crystal waveguide, and we characterized in detail the efficiency of the device and the coherence of the emitted single photons. We investigate the decoherence mechanisms affecting the quantum dots by performing resonance fluorescence experiments on emitters...... of a single charge. A very high degree of coherence can be achieved by embedding quantum dots in electrically gated samples. We show that a single quantum dot behaves like a nearly-ideal two-level system in a sample with electrical gates, and single photons emitted up to 1 μs apart show indistinguishability...
Kapur, Ajay; Adair, Nilda; O'Brien, Mildred; Naparstek, Nikoleta; Cangelosi, Thomas; Zuvic, Petrina; Joseph, Sherin; Meier, Jason; Bloom, Beatrice; Potters, Louis
2017-06-29
Modern external beam radiation therapy treatment delivery processes potentially increase the number of tasks to be performed by therapists and thus opportunities for errors, yet the need to treat a large number of patients daily requires a balanced allocation of time per treatment slot. The goal of this work was to streamline the underlying workflow in such time-interval constrained processes to enhance both execution efficiency and active safety surveillance using a Kaizen approach. A Kaizen project was initiated by mapping the workflow within each treatment slot for 3 Varian TrueBeam linear accelerators. More than 90 steps were identified, and average execution times for each were measured. The time-consuming steps were stratified into a 2 × 2 matrix arranged by potential workflow improvement versus the level of corrective effort required. A work plan was created to launch initiatives with high potential for workflow improvement but modest effort to implement. Time spent on safety surveillance and average durations of treatment slots were used to assess corresponding workflow improvements. Three initiatives were implemented to mitigate unnecessary therapist motion, overprocessing of data, and wait time for data transfer defects, respectively. A fourth initiative was implemented to make the division of labor by treating therapists as well as peer review more explicit. The average duration of treatment slots reduced by 6.7% in the 9 months following implementation of the initiatives (P = .001). A reduction of 21% in duration of treatment slots was observed on 1 of the machines (P Kaizen approach has the potential to improve operational efficiency and safety with quick turnaround in radiation therapy practice by addressing non-value-adding steps characteristic of individual department workflows. Higher effort opportunities are identified to guide continual downstream quality improvements. Copyright © 2017. Published by Elsevier Inc.
Efficient quantum computation in a network with probabilistic gates and logical encoding
DEFF Research Database (Denmark)
Borregaard, J.; Sørensen, A. S.; Cirac, J. I.
2017-01-01
An approach to efficient quantum computation with probabilistic gates is proposed and analyzed in both a local and nonlocal setting. It combines heralded gates previously studied for atom or atomlike qubits with logical encoding from linear optical quantum computation in order to perform high......-fidelity quantum gates across a quantum network. The error-detecting properties of the heralded operations ensure high fidelity while the encoding makes it possible to correct for failed attempts such that deterministic and high-quality gates can be achieved. Importantly, this is robust to photon loss, which...... is typically the main obstacle to photonic-based quantum information processing. Overall this approach opens a path toward quantum networks with atomic nodes and photonic links....
Multipulse addressing of a Raman quantum memory: configurable beam splitting and efficient readout.
Reim, K F; Nunn, J; Jin, X-M; Michelberger, P S; Champion, T F M; England, D G; Lee, K C; Kolthammer, W S; Langford, N K; Walmsley, I A
2012-06-29
Quantum memories are vital to the scalability of photonic quantum information processing (PQIP), since the storage of photons enables repeat-until-success strategies. On the other hand, the key element of all PQIP architectures is the beam splitter, which allows us to coherently couple optical modes. Here, we show how to combine these crucial functionalities by addressing a Raman quantum memory with multiple control pulses. The result is a coherent optical storage device with an extremely large time bandwidth product, that functions as an array of dynamically configurable beam splitters, and that can be read out with arbitrarily high efficiency. Networks of such devices would allow fully scalable PQIP, with applications in quantum computation, long distance quantum communications and quantum metrology.
Efficient Three-Party Quantum Dialogue Protocol Based on the Continuous Variable GHZ States
Yu, Zhen-Bo; Gong, Li-Hua; Zhu, Qi-Biao; Cheng, Shan; Zhou, Nan-Run
2016-07-01
Based on the continuous variable GHZ entangled states, an efficient three-party quantum dialogue protocol is devised, where each legitimate communication party could simultaneously deduce the secret information of the other two parties with perfect efficiency. The security is guaranteed by the correlation of the continuous variable GHZ entangled states and the randomly selected decoy states. Furthermore, the three-party quantum dialogue protocol is directly generalized to an N-party quantum dialogue protocol by using the n-tuple continuous variable GHZ entangled states.
A power-efficient communication system between brain-implantable devices and external computers.
Yao, Ning; Lee, Heung-No; Chang, Cheng-Chun; Sclabassi, Robert J; Sun, Mingui
2007-01-01
In this paper, we propose a power efficient communication system for linking a brain-implantable device to an external system. For battery powered implantable devices, the processor and the transmitter power should be reduced in order to both conserve battery power and reduce the health risks associated with transmission. To accomplish this, a joint source-channel coding/decoding system is devised. Low-density generator matrix (LDGM) codes are used in our system due to their low encoding complexity. The power cost for signal processing within the implantable device is greatly reduced by avoiding explicit source encoding. Raw data which is highly correlated is transmitted. At the receiver, a Markov chain source correlation model is utilized to approximate and capture the correlation of raw data. A turbo iterative receiver algorithm is designed which connects the Markov chain source model to the LDGM decoder in a turbo-iterative way. Simulation results show that the proposed system can save up to 1 to 2.5 dB on transmission power.
Energy Technology Data Exchange (ETDEWEB)
Nolde, Jill A., E-mail: jill.nolde@nrl.navy.mil; Kim, Chul Soo; Jackson, Eric M.; Ellis, Chase T.; Abell, Joshua; Glembocki, Orest J.; Canedy, Chadwick L.; Tischler, Joseph G.; Vurgaftman, Igor; Meyer, Jerry R.; Aifer, Edward H. [Naval Research Laboratory, 4555 Overlook Ave. SW, Washington, DC 20375 (United States); Kim, Mijin [Sotera Defense Solutions, Inc., 7230 Lee Deforest Dr. Suite 100, Columbia, Maryland 21046 (United States)
2015-06-29
We demonstrate up to 39% resonant enhancement of the quantum efficiency (QE) of a low dark current nBn midwave infrared photodetector with a 0.5 μm InAsSb absorber layer. The enhancement was achieved by using a 1D plasmonic grating to couple incident light into plasmon modes propagating in the plane of the device. The plasmonic grating is composed of stripes of deposited amorphous germanium overlaid with gold. Devices with and without gratings were processed side-by-side for comparison of their QEs and dark currents. The peak external QE for a grating device was 29% compared to 22% for a mirror device when the illumination was polarized perpendicularly to the grating lines. Additional experiments determined the grating coupling efficiency by measuring the reflectance of analogous gratings deposited on bare GaSb substrates.
Miyoshi, Makoto; Tsutsumi, Tatsuya; Kabata, Tomoki; Mori, Takuma; Egawa, Takashi
2017-03-01
We investigated the effect of well layer thicknesses on the external quantum efficiency (EQE) and energy conversion efficiency (ECE) for InGaN/GaN multiple quantum well (MQW) solar cells grown on sapphire substrates by metalorganic chemical vapor deposition. The results indicated that EQE and ECE have maximum values at a specific well thickness. When the well thickness is sufficiently thin, EQE and ECE increase with an increase in the well thickness owing to an increase in light absorption. Then, once the well thickness surpasses a critical thickness, EQE and ECE begin to decrease owing to the influence of nonradiative recombination processes, which was indicated by the static and dynamic photoluminescence analyses. The critical well thickness probably depends not only on the MQW design but also on growth conditions. Further, we confirmed that the increased total thickness of the stacked well layers leads to increased light absorption and thereby contributes to the improvement of solar cell performance. A high short circuit current density of 1.34 mA/cm2 and a high ECE of 1.31% were achieved for a InGaN/GaN MQW solar cell with a 3.2-nm-thick InGaN well with total well thickness of 115 nm.
Terahertz Quantum Cascade Laser With Efficient Coupling and Beam Profile
Chattopadhyay, Goutam; Kawamura, Jonathan H.; Lin, Robert H.; Williams, Benjamin
2012-01-01
Quantum cascade lasers (QCLs) are unipolar semiconductor lasers, where the wavelength of emitted radiation is determined by the engineering of quantum states within the conduction band in coupled multiple-quantum-well heterostructures to have the desired energy separation. The recent development of terahertz QCLs has provided a new generation of solid-state sources for radiation in the terahertz frequency range. Terahertz QCLs have been demonstrated from 0.84 to 5.0 THz both in pulsed mode and continuous wave mode (CW mode). The approach employs a resonant-phonon depopulation concept. The metal-metal (MM) waveguide fabrication is performed using Cu-Cu thermo-compression bonding to bond the GaAs/AlGaAs epitaxial layer to a GaAs receptor wafer.
Hernández-Sancho, F; Molinos-Senante, M; Sala-Garrido, R
2011-12-01
Efficiency and productivity are important measures for identifying best practice in businesses and optimising resource-use. This study analyses how these two measures change across the period 2003-2008 for 196 wastewater treatment plants (WWTPs) in Spain, by using the benchmarking methods of Data Envelopment Analysis and the Malmquist Productivity Index. To identify which variables contribute to the sustainability of the WWTPs, differences in efficiency scores and productivity indices for external factors are also investigated. Our results indicate that both efficiency and productivity decreased over the five years. We verify that the productivity drop is primarily explained by technical change. Furthermore, certain external variables affected WWTP efficiency, including plant size, treatment technology and energy consumption. However, plants with low energy consumption are the only ones which improve their productivity. Finally, the benchmarking analyses proved to be useful as management tools in the wastewater sector, by providing vital information for improving the sustainability of plants.
Planar supersymmetric quantum mechanics of a charged particle in an external electromagnetic field
Energy Technology Data Exchange (ETDEWEB)
Paschoal, Ricardo C. [Servico Nacional de Aprendizagem Industrial, Rio de Janeiro, RJ (Brazil). Centro de Tecnologia da Industria Quimica e Textil (SENAI/CETIQT)]. E-mail: paschoal@cbpf.br; Helayel-Neto, Jose A.; Assis, Leonardo P.G. de [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil)]|[Grupo de Fisica Teorica Jose Leite Lopes, Petropolis, RJ (Brazil); E-mails: helayel@cbpf.br; lpgassis@cbpf.br
2004-07-01
The supersymmetric quantum mechanics of a two-dimensional non-relativistic particle subject to both magnetic and electric fields is studied in a superfield formulation and with the typical non-minimal coupling of (2+1) dimensions. Both the N=1 and N=2 cases are contemplated and the introduction of the electric interaction is suitably analysed. (author)
Modeling of dilute nitride cascaded quantum well solar cells for high efficiency photovoltaics
Vijaya, G.; Alemu, A.; Freundlich, A.
2013-03-01
III-V Dilute Nitride multi-quantum well structures are currently promising candidates to achieve 1 sun efficiencies of cell in a 4 junction configuration could yield 1 sun efficiencies greater than 40%. However for a conventional deep well design the characteristic carrier escape times could exceed that of radiative recombination hence limiting the current output of the cell, as has been indicated by prior experiments. In order to increase the current extraction here we evaluate the performance of a cascaded quantum well design whereby a thermally assisted resonant tunneling process is used to accelerate the carrier escape process (efficiency. The quantum efficiency of a p-i-n subcell where a periodic sequence of quantum wells with well and barrier thicknesses adjusted for the sequential extraction operation is calculated using a 2D drift diffusion model and taking into account absorption properties of resulting MQWs. The calculation also accounts for the E-field induced modifications of absorption properties and quantization in quantum wells. The results are then accounted for to calculate efficiencies for the proposed 4 junction design, and indicate potential for reaching efficiencies in excess of this structure is above 42% (1 sun) and above 50% (500 sun) AM1.5.
Origin of low quantum efficiency of photoluminescence of InP/ZnS nanocrystals
Energy Technology Data Exchange (ETDEWEB)
Shirazi, Roza, E-mail: rozas@fotonik.dtu.dk [Department of Photonics Engineering, Technical University of Denmark, Oersted Plads 343, 2800 Kgs Lyngby (Denmark); Kovacs, Andras [Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons, Peter Grunberg Institute, Forschungszentrum Julich, 52425 Julich (Germany); Dan Corell, Dennis [Department of Photonics Engineering, Technical University of Denmark, Riso, Frederiksborgvej 399, 4000 Roskilde (Denmark); Gritti, Claudia [Department of Photonics Engineering, Technical University of Denmark, Oersted Plads 343, 2800 Kgs Lyngby (Denmark); Thorseth, Anders; Dam-Hansen, Carsten; Michael Petersen, Paul [Department of Photonics Engineering, Technical University of Denmark, Riso, Frederiksborgvej 399, 4000 Roskilde (Denmark); Kardynal, Beata [Department of Photonics Engineering, Technical University of Denmark, Oersted Plads 343, 2800 Kgs Lyngby (Denmark); PGI-9, Forschungszentrum Julich, JARA FIT, 52425 Julich (Germany)
2014-01-15
In this paper, we study the origin of a strong wavelength dependence of the quantum efficiency of InP/ZnS nanocrystals. We find that while the average size of the nanocrystals increased by 50%, resulting in longer emission wavelength, the quantum efficiency drops more than one order of magnitude compared to the quantum efficiency of the small nanocrystals. By correlating this result with the time-resolved photoluminescence we find that the reduced photoluminescence efficiency is caused by a fast growing fraction of non-emissive nanocrystals while the quality of the nanocrystals that emit light is similar for all samples. Transmission electron microscopy reveals the polycrystalline nature of many of the large nanocrystals, pointing to the grain boundaries as one possible site for the photoluminescence quenching defects. -- Highlights: • We investigate drop of quantum efficiency of InP/ZnS nanocrystals emitting at longer wavelengths. • We correlate quantum efficiency measurements with time-resolved carrier dynamics. • We find that only a small fraction of larger nanocrystals is optically active.
Efficiency and Coherence of Quantum-Dot Single-Photon Sources
DEFF Research Database (Denmark)
Madsen, Marta Arcari
of single quantum dots to the waveguide, we demonstrate that the emitters are coupled with near-unity efficiency to the waveguide mode. We measure a coupling efficiency (β-factor) as high as 98.4% close to the band-edge of the waveguide mode, and β-factors above 90% over a bandwidth of 20 nm. Based...
Efficient mode conversion in an optical nanoantenna mediated by quantum emitters
Straubel, Jakob; Rockstuhl, Carsten; Slowik, Karolina
2016-01-01
Converting signals between different electromagnetic modes is an asset for future information technologies. In general, slightly asymmetric optical nanoantennas enable the coupling between bright and dark modes sustained by an optical nanoantenna. However, the conversion efficiency might be very low. Here, we show that the additional incorporation of a quantum emitter allows to tremendously enhance this efficiency. The enhanced local density of states cycles the quantum emitter between its upper and lower level at an extremely hight rate; hence converting the energy very efficient. The process is robust with respect to possible experimental tolerances and adds a new ingredient to be exploited while studying and applying coupling phenomena in optical nanosystems.
High heralding-efficiency of near-IR fiber coupled photon pairs for quantum technologies
Energy Technology Data Exchange (ETDEWEB)
Dixon, P. Ben [Massachusetts Institute of Technology (MIT); Murphy, Ryan [Lincoln Laboratory, Massachusetts Institute of Technology (MIT); Rosenberg, Danna [Massachusetts Institute of Technology (MIT); Grein, Matthew E. [Massachusetts Institute of Technology (MIT); Stelmakh, Veronika [Massachusetts Institute of Technology (MIT); Bennink, Ryan S [ORNL; Wong, Franco N. C. [Massachusetts Institute of Technology (MIT)
2015-01-01
We report on the development and use of a high heralding-efficiency, single-mode-fiber coupled telecom-band source of entangled photons for quantum technology applications. The source development efforts consisted of theoretical and experimental efforts and we demonstrated a correlated-mode coupling efficiency of 97% 2%, the highest efficiency yet achieved for this type of system. We then incorporated these beneficial source development techniques in a Sagnac configured telecom-band entangled photon source that generates photon pairs entangled in both time/energy and polarization degrees of freedom. We made use of these highly desirable entangled states to investigate several promising quantum technologies.
Choi, Young-Hwan; Ryu, Guen-Hwan; Ryu, Han-Youl
2016-10-01
The internal quantum efficiency (IQE) and the light extraction efficiency (LEE) of a GaN-based blue light-emitting diode (LED) are evaluated separately in the temperature range between 20 to 80 °C. The theoretical IQE model based on the carrier rate equation of semiconductors is applied to determine the IQE and the LEE separately from a measured external quantum efficiency (EQE) versus current relation for the LED sample. While the peak EQE of the measured sample decreases by 3.2 % as the temperature increases from 20 to 80 °C, it is found that the peak IQE decreases by 4.5 % and the LEE increases by 1.5 %.
Efficient measurement of quantum gate error by interleaved randomized benchmarking.
Magesan, Easwar; Gambetta, Jay M; Johnson, B R; Ryan, Colm A; Chow, Jerry M; Merkel, Seth T; da Silva, Marcus P; Keefe, George A; Rothwell, Mary B; Ohki, Thomas A; Ketchen, Mark B; Steffen, M
2012-08-24
We describe a scalable experimental protocol for estimating the average error of individual quantum computational gates. This protocol consists of interleaving random Clifford gates between the gate of interest and provides an estimate as well as theoretical bounds for the average error of the gate under test, so long as the average noise variation over all Clifford gates is small. This technique takes into account both state preparation and measurement errors and is scalable in the number of qubits. We apply this protocol to a superconducting qubit system and find a bounded average error of 0.003 [0,0.016] for the single-qubit gates X(π/2) and Y(π/2). These bounded values provide better estimates of the average error than those extracted via quantum process tomography.
Efficient algorithms for the laboratory discovery of optimal quantum controls.
Turinici, Gabriel; Le Bris, Claude; Rabitz, Herschel
2004-01-01
The laboratory closed-loop optimal control of quantum phenomena, expressed as minimizing a suitable cost functional, is currently implemented through an optimization algorithm coupled to the experimental apparatus. In practice, the most commonly used search algorithms are variants of genetic algorithms. As an alternative choice, a direct search deterministic algorithm is proposed in this paper. For the simple simulations studied here, it outperforms the existing approaches. An additional algorithm is introduced in order to reveal some properties of the cost functional landscape.
Efficient spray-coated colloidal quantum dot solar cells
Kramer, Illan J.
2014-11-10
(Figure Presented). A colloidal quantum dot solar cell is fabricated by spray-coating under ambient conditions. By developing a room-temperature spray-coating technique and implementing a fully automated process with near monolayer control - an approach termed as sprayLD - an electronic defect is eliminated resulting in solar cell performance and statistical distribution superior to prior batch-processed methods along with a hero performance of 8.1%.
Nanopatterned Quantum Dot Lasers for High Speed, High Efficiency, Operation
2015-04-27
SUBTITLE 13. SUPPLEMENTARY NOTES 12. DISTRIBUTION AVAILIBILITY STATEMENT 6. AUTHORS 7. PERFORMING ORGANIZATION NAMES AND ADDRESSES 15. SUBJECT TERMS ...growth using metalorganic chemical vapor deposition (MOCVD). These methods allowed us to realize quantum dot active regions in which the injected carriers...temperature sensitivity , commonly observed in self-assembled QD lasers2. An alternate approach to SK QD formation is the use of nanopatterning with
Efficient optimal minimum error discrimination of symmetric quantum states
Assalini, Antonio; Cariolaro, Gianfranco; Pierobon, Gianfranco
2010-01-01
This article deals with the quantum optimal discrimination among mixed quantum states enjoying geometrical uniform symmetry with respect to a reference density operator ρ0. It is well known that the minimal error probability is given by the positive operator-valued measure obtained as a solution of a convex optimization problem, namely a set of operators satisfying geometrical symmetry, with respect to a reference operator Π0 and maximizing Tr(ρ0Π0). In this article, by resolving the dual problem, we show that the same result is obtained by minimizing the trace of a semidefinite positive operator X commuting with the symmetry operator and such that X⩾ρ0. The new formulation gives a deeper insight into the optimization problem and allows to obtain closed-form analytical solutions, as shown by a simple but not trivial explanatory example. In addition to the theoretical interest, the result leads to semidefinite programming solutions of reduced complexity, allowing to extend the numerical performance evaluation to quantum communication systems modeled in Hilbert spaces of large dimension.
Coropceanu, Igor; Bawendi, Moungi G
2014-07-09
CdSe/CdS core/shell quantum dots (QDs) have been optimized toward luminescent solar concentration (LSC) applications. Systematically increasing the shell thickness continuously reduced reabsorption up to a factor of 45 for the thickest QDs studied (with ca. 14 monolayers of CdS) compared to the initial CdSe cores. Moreover, an improved synthetic method was developed that retains a high-fluorescence quantum yield, even for particles with the thickest shell volume, for which a quantum yield of 86% was measured in solution. These high quantum yield thick shell quantum dots were embedded in a polymer matrix, yielding highly transparent composites to serve as prototype LSCs, which exhibited an optical efficiency as high as 48%. A Monte Carlo simulation was developed to model LSC performance and to identify the major loss channels for LSCs incorporating the materials developed. The results of the simulation are in excellent agreement with the experimental data.
External meeting - Geneva University: A lab in a trap: quantum gases in optical lattices
2007-01-01
GENEVA UNIVERSITY ECOLE DE PHYSIQUE Département de physique nucléaire et corspusculaire 24, Quai Ernest-Ansermet 1211 GENEVE 4 - Tél: 022 379 62 73 - Fax: 022 379 69 92 Monday 16 April 2007 PARTICLE PHYSICS SEMINAR at 17:00 - Stückelberg Auditorium A lab in a trap: quantum gases in optical lattices by Prof. Tilman Esslinger / Department of Physics, ETH Zurich The field of ultra cold quantum gases has seen an astonishing development during the last ten years. With the demonstration of Bose-Einstein condensation in weakly interacting atomic gases a theoretical concept of unique beauty could be witnessed experimentally. Very recent developments have now made it possible to engineer atomic many-body systems which are dominated by strong interactions. A major driving force for these advances are experiments in which ultracold atoms are trapped in optical lattices. These systems provide anew avenue for designing and studying quantum many-body systems. Exposed to the crystal structure of interfering laser wave...
Quantum Dots Promise to Significantly Boost Solar Cell Efficiencies (Fact Sheet)
Energy Technology Data Exchange (ETDEWEB)
2013-08-01
In the search for a third generation of solar-cell technologies, a leading candidate is the use of 'quantum dots' -- tiny spheres of semiconductor material measuring only about 2-10 billionths of a meter in diameter. Quantum dots have the potential to dramatically increase the efficiency of converting sunlight into energy -- perhaps even doubling it in some devices -- because of their ability to generate more than one bound electron-hole pair, or exciton, per incoming photon. NREL has produced quantum dots using colloidal suspensions; then, using molecular self-assembly, they have been fabricated into the first-ever quantum-dot solar cells. While these devices operate with only 4.4% efficiency, they demonstrate the capability for low-cost manufacturing.
Kano, Shinya; Fujii, Minoru
2017-03-01
We study the conversion efficiency of an energy harvester based on resonant tunneling through quantum dots with heat leakage. Heat leakage current from a hot electrode to a cold electrode is taken into account in the analysis of the harvester operation. Modeling of electrical output indicates that a maximum heat leakage current is not negligible because it is larger than that of the heat current harvested into electrical power. A reduction of heat leakage is required in this energy harvester in order to obtain efficient heat-to-electrical conversion. Multiple energy levels of a quantum dot can increase the output power of the harvester. Heavily doped colloidal semiconductor quantum dots are a possible candidate for a quantum-dot monolayer in the energy harvester to reduce heat leakage, scaling down device size, and increasing electrical output via multiple discrete energy levels.
Wang, He; Zhang, Yu Qing; Liu, Xue Feng; Hu, Yu Pu
2016-06-01
We propose a novel quantum dialogue protocol by using the generalized Bell states and entanglement swapping. In the protocol, a sequence of ordered two-qutrit entangled states acts as quantum information channel for exchanging secret messages directly and simultaneously. Besides, a secret key string is shared between the communicants to overcome information leakage. Different from those previous information leakage-resistant quantum dialogue protocols, the particles, composed of one of each pair of entangled states, are transmitted only one time in the proposed protocol. Security analysis shows that our protocol can overcome information leakage and resist several well-known attacks. Moreover, the efficiency of our scheme is acceptable.
Efficient Modeling of Coulomb Interaction Effect on Exciton in Crystal-Phase Nanowire Quantum Dot
DEFF Research Database (Denmark)
Taherkhani, Masoomeh; Gregersen, Niels; Mørk, Jesper
2016-01-01
The binding energy and oscillation strength of the ground-state exciton in type-II quantum dot (QD) is calculated by using a post Hartree-Fock method known as the configuration interaction (CI) method which is significantly more efficient than conventional methods like ab initio method. We show t...... that the Coulomb interaction between electron and holes in these structures considerably affects the transition dipole moment which is the key parameter of optical quantum gating in STIRAP (stimulated Raman adiabatic passage) process for implementing quantum gates [1], [2]....
Fluorescent porous silicon biological probes with high quantum efficiency and stability.
Tu, Chang-Ching; Chou, Ying-Nien; Hung, Hsiang-Chieh; Wu, Jingda; Jiang, Shaoyi; Lin, Lih Y
2014-12-01
We demonstrate porous silicon biological probes as a stable and non-toxic alternative to organic dyes or cadmium-containing quantum dots for imaging and sensing applications. The fluorescent silicon quantum dots which are embedded on the porous silicon surface are passivated with carboxyl-terminated ligands through stable Si-C covalent bonds. The porous silicon bio-probes have shown photoluminescence quantum yield around 50% under near-UV excitation, with high photochemical and thermal stability. The bio-probes can be efficiently conjugated with antibodies, which is confirmed by a standard enzyme-linked immunosorbent assay (ELISA) method.
Efficient Raman generation in a waveguide: A route to ultrafast quantum random number generation
England, D. G.; Bustard, P. J.; Moffatt, D. J.; Nunn, J.; Lausten, R.; Sussman, B. J.
2014-02-01
The inherent uncertainty in quantum mechanics offers a source of true randomness which can be used to produce unbreakable cryptographic keys. We discuss the development of a high-speed random number generator based on the quantum phase fluctuations in spontaneously initiated stimulated Raman scattering (SISRS). We utilize the tight confinement and long interaction length available in a Potassium Titanyl Phosphate waveguide to generate highly efficient SISRS using nanojoule pulse energies, reducing the high pump power requirements of the previous approaches. We measure the random phase of the Stokes output using a simple interferometric setup to yield quantum random numbers at 145 Mbps.
Huang, Xuanqi; Fu, Houqiang; Chen, Hong; Zhang, Xiaodong; Lu, Zhijian; Montes, Jossue; Iza, Michael; DenBaars, Steven P.; Nakamura, Shuji; Zhao, Yuji
2017-04-01
We demonstrate the nonpolar and semipolar InGaN/GaN multiple-quantum-well (MQW) solar cells grown on the nonpolar m-plane and semipolar ( 20 2 ¯ 1 ) plane bulk GaN substrates. The optical properties and photovoltaic performance of the nonpolar and semipolar InGaN solar cells were systematically studied, and the results were compared to the conventional polar c-plane devices. The absorption spectra, current density-voltage (J-V) characteristics, external quantum efficiency (EQE), and internal quantum efficiency (IQE) were measured for nonpolar m-plane, semipolar ( 20 2 ¯ 1 ) plane, and polar c-plane InGaN/GaN MQW solar cells. Nonpolar m-plane InGaN/GaN MQW solar cells showed the best performance across all devices, with a high open-circuit voltage of 2.32 V, a low bandgap-voltage offset of 0.59 V, and the highest EQE and IQE. In contrast, the polar c-plane device showed the lowest EQE despite the highest absorption spectra. This huge difference is attributed to the better carrier transport and collection on nonpolar m-plane devices due to the reduced polarization effects, which were further confirmed by bias-dependent EQE measurements and energy band diagram simulations. This study demonstrates the high potential of nonpolar and semipolar InGaN solar cells and can serve as guidance for the future design and fabrication of high efficiency III-nitride solar cells.
Yun, Hyeong Jin; Paik, Taejong; Diroll, Benjamin; Edley, Michael E; Baxter, Jason B; Murray, Christopher B
2016-06-15
Light absorption and electron injection are important criteria determining solar energy conversion efficiency. In this research, monodisperse CdSe quantum dots (QDs) are synthesized with five different diameters, and the size-dependent solar energy conversion efficiency of CdSe quantum dot sensitized solar cell (QDSSCs) is investigated by employing the atomic inorganic ligand, S(2-). Absorbance measurements and transmission electron microscopy show that the diameters of the uniform CdSe QDs are 2.5, 3.2, 4.2, 6.4, and 7.8 nm. Larger CdSe QDs generate a larger amount of charge under the irradiation of long wavelength photons, as verified by the absorbance results and the measurements of the external quantum efficiencies. However, the smaller QDs exhibit faster electron injection kinetics from CdSe QDs to TiO2 because of the high energy level of CBCdSe, as verified by time-resolved photoluminescence and internal quantum efficiency results. Importantly, the S(2-) ligand significantly enhances the electronic coupling between the CdSe QDs and TiO2, yielding an enhancement of the charge transfer rate at the interfacial region. As a result, the S(2-) ligand helps improve the new size-dependent solar energy conversion efficiency, showing best performance with 4.2-nm CdSe QDs, whereas conventional ligand, mercaptopropionic acid, does not show any differences in efficiency according to the size of the CdSe QDs. The findings reported herein suggest that the atomic inorganic ligand reinforces the influence of quantum confinement on the solar energy conversion efficiency of QDSSCs.
Exciton spectra in GaAs/Ga1-xAlxAs quantum wells in an externally applied electric field
Zhu, Bangfen
1988-12-01
A theory on the exciton spectra in quantum wells in the presence of an external electric field is presented. The theory emphasizes the usually ignored aspect, namely, that the different exciton spinor components correspond to different in-plane angular momenta and only a single spinor component contributes to the optical transition, which in conjunction with the hybridization of the heavy and light holes will affect the exciton binding energies and oscillator strengths drastically. Numerical calculations based on the theory explain the contradictory behavior of the h12a peak observed by Collins et al., which is actually the 2p state of the light-hole-conduction-band (LH1-CB1) exciton.
Hu, Fa-Jie; Jin, Peng; Wu, Yan-Hua; Wang, Fei-Fei; Wei, Heng; Wang, Zhan-Guo
2015-10-01
A wide wavelength tuning range swept external-cavity laser using an InAs/GaAs quantum-dot superluminescent diode as a gain device is demonstrated. The tunable filter consists of a polygon scanner and a grating in Littrow telescope-less configuration. The swept laser generates greater than 54-mW peak output power and up to 33-kHz sweep rate with a sweep range of 150 nm centered at 1155 nm. The effects of injection current and sweep rate on the sweep performance of the swept laser are studied. Project supported by the National Natural Science Foundation of China (Grant No. 61274072) and the National High Technology Research and Development Program of China (Grant No. 2013AA014201).
Energy Technology Data Exchange (ETDEWEB)
Brumfield, Brian E.; Taubman, Matthew S.; Phillips, Mark C.
2016-02-13
A rapidly-swept external cavity quantum cascade laser (ECQCL) system for fast open-path quantification of multiple chemicals and mixtures is presented. The ECQCL system is swept over its entire tuning range (>100 cm-1) at frequencies up to 200 Hz. At 200 Hz the wavelength tuning rate and spectral resolution are 2x104 cm-1/sec and < 0.2 cm-1, respectively. The capability of the current system to quantify changes in chemical concentrations on millesecond timescales is demonstrated at atmospheric pressure using an open-path multi-pass cell. The detection limits for chemicals ranged from ppb to ppm levels depending on the absorption cross-section.
An efficient quantum scheme for Private Set Intersection
Shi, Run-hua; Mu, Yi; Zhong, Hong; Cui, Jie; Zhang, Shun
2016-01-01
Private Set Intersection allows a client to privately compute set intersection with the collaboration of the server, which is one of the most fundamental and key problems within the multiparty collaborative computation of protecting the privacy of the parties. In this paper, we first present a cheat-sensitive quantum scheme for Private Set Intersection. Compared with classical schemes, our scheme has lower communication complexity, which is independent of the size of the server's set. Therefore, it is very suitable for big data services in Cloud or large-scale client-server networks.
Photoluminescence efficiency in AlGaN quantum wells
Energy Technology Data Exchange (ETDEWEB)
Tamulaitis, G.; Mickevičius, J. [Institute of Applied Research and Semiconductor Physics Department, Vilnius University, Sauletekio av. 9-III, Vilnius LT-10222 (Lithuania); Jurkevičius, J., E-mail: jonas.jurkevicius@ff.vu.lt [Institute of Applied Research and Semiconductor Physics Department, Vilnius University, Sauletekio av. 9-III, Vilnius LT-10222 (Lithuania); Shur, M.S. [Department of ECE and CIE, Rensselaer Polytechnic Institute (United States); Shatalov, M.; Yang, J.; Gaska, R. [Sensor Electronic Technology, Inc. (United States)
2014-11-15
Photoluminescence spectroscopy of AlGaN/AlGaN multiple quantum wells under quasi-steady-state conditions in the temperature range from 8 to 300 K revealed a strong dependence of droop onset threshold on temperature that was explained by the influence of carrier delocalization. The delocalization at room temperature results predominantly in enhancement of bimolecular radiative recombination, while being favorable for enhancement of nonradiative recombination at low temperatures. Studies of stimulated emission confirmed the strong influence of carrier localization on droop.
Shi, Zhifeng; Li, Ying; Zhang, Yuantao; Chen, Yongsheng; Li, Xinjian; Wu, Di; Xu, Tingting; Shan, Chongxin; Du, Guotong
2017-01-11
Perovskite light-emitting diodes (PeLEDs), because of its fundamental scientific importance and practical applications in the fields of low-cost light source or display applications, have drawn worldwide attention in recent years. However, PeLEDs available today suffer from a compromise in their emission efficiency and operation stability. In this study, we designed and fabricated a stacking all-inorganic multilayer structure by using inorganic perovskite CsPbBr3 quantum dots (QDs) as the emissive layer and inorganic n-type MgZnO and p-type MgNiO as the carrier injectors, respectively. Through energy band engineering of carrier injectors by Mg incorporation and their thickness optimization, PeLEDs with maximum luminance of 3809 cd/m(2), luminous efficiency of 2.25 cd/A, and external quantum efficiency of 2.39% have been realized, which are much better than most PeLEDs from CH3NH3PbBr3 films, and comparable with the highest results reported on CsPbBr3 QDs LEDs. More importantly, the unencapsulated PeLEDs in a continuous current mode demonstrate a remarkable operation stability against water and oxygen degradation. After a continuous operation for 10 h under a dc bias (10.0 V), nearly 80% of the original efficiency of the PeLEDs has been retained, greatly superior to reference and other previously reported devices constructed with conventional organic carrier injectors. Our results obtained open possibilities for the design and development of high-efficiency and air-stable PeLEDs that are not dependent on expensive and less-stable organic carrier injectors.
Temperature dependence of quantum efficiency of Schottky diodes based on 4H-SiC
Blank, T V; Kalinina, E V; Konstantinov, O V; Konstantinov, A O; Hallen, A
2001-01-01
The metal-semiconductor structures, which made it possible to create the photoreceivers of the Cr-4H-SiC ultraviolet radiation with the photosensitivity maximum by 4.9 eV and quantum efficiency up to 0.3 were manufactured on the basis of the n-4H-SiC pure epitaxial layer. The experimental study on the temperature dependence of the quantum efficiency of the photoelectric transformation showed, that by the photons energy of 3.4-4.7 eV and the temperatures above 300 K there takes place fast growth of the quantum efficiency with growth of temperatures, which is conditioned by participation of the phonons in the indirect interzonal transitions
An efficient quantum mechanical method for radical pair recombination reactions
Lewis, Alan M.; Fay, Thomas P.; Manolopoulos, David E.
2016-12-01
The standard quantum mechanical expressions for the singlet and triplet survival probabilities and product yields of a radical pair recombination reaction involve a trace over the states in a combined electronic and nuclear spin Hilbert space. If this trace is evaluated deterministically, by performing a separate time-dependent wavepacket calculation for each initial state in the Hilbert space, the computational effort scales as O (Z2log Z ) , where Z is the total number of nuclear spin states. Here we show that the trace can also be evaluated stochastically, by exploiting the properties of spin coherent states. This results in a computational effort of O (M Z log Z ) , where M is the number of Monte Carlo samples needed for convergence. Example calculations on a strongly coupled radical pair with Z >106 show that the singlet yield can be converged to graphical accuracy using just M =200 samples, resulting in a speed up by a factor of >5000 over a standard deterministic calculation. We expect that this factor will greatly facilitate future quantum mechanical simulations of a wide variety of radical pairs of interest in chemistry and biology.
Scales of Time Where the Quantum Discord Allows an Efficient Execution of the DQC1 Algorithm
Directory of Open Access Journals (Sweden)
M. Ávila
2014-01-01
Full Text Available The power of one qubit deterministic quantum processor (DQC1 (Knill and Laflamme (1998 generates a nonclassical correlation known as quantum discord. The DQC1 algorithm executes in an efficient way with a characteristic time given by τ=Tr[Un]/2n, where Un is an n qubit unitary gate. For pure states, quantum discord means entanglement while for mixed states such a quantity is more than entanglement. Quantum discord can be thought of as the mutual information between two systems. Within the quantum discord approach the role of time in an efficient evaluation of τ is discussed. It is found that the smaller the value of t/T is, where t is the time of execution of the DQC1 algorithm and T is the scale of time where the nonclassical correlations prevail, the more efficient the calculation of τ is. A Mösbauer nucleus might be a good processor of the DQC1 algorithm while a nuclear spin chain would not be efficient for the calculation of τ.
Energy Technology Data Exchange (ETDEWEB)
Hassan, Ali Saif M [Department of Physics, University of Amran, Amran (Yemen); Lari, Behzad; Joag, Pramod S, E-mail: alisaif73@gmail.co, E-mail: behzadlari1979@yahoo.co, E-mail: pramod@physics.unipune.ac.i [Department of Physics, University of Pune, Pune 411007 (India)
2010-12-03
We investigate how thermal quantum discord (QD) and classical correlations (CC) of a two-qubit one-dimensional XX Heisenberg chain in thermal equilibrium depend on the temperature of the bath as well as on nonuniform external magnetic fields applied to two qubits and varied separately. We show that the behavior of QD differs in many unexpected ways from the thermal entanglement (EOF). For the nonuniform case (B{sub 1} = -B{sub 2}), we find that QD and CC are equal for all values of (B{sub 1} = -B{sub 2}) and for different temperatures. We show that, in this case, the thermal states of the system belong to a class of mixed states and satisfy certain conditions under which QD and CC are equal. The specification of this class and the corresponding conditions are completely general and apply to any quantum system in a state in this class satisfying these conditions. We further find that the relative contributions of QD and CC can be controlled easily by changing the relative magnitudes of B{sub 1} and B{sub 2}. Finally, we connect our results with the monogamy relations between the EOF, CC and the QD of two qubits and the environment.
Ma, Shao-Qiang; Zhu, Han-Jie; Zhang, Guo-Feng
2017-04-01
The effects of different quantum feedback types on the estimation precision of the detection efficiency are studied. It is found that the precision can be more effective enhanced by a certain feedback type through comparing these feedbacks and the precision has a positive relation with detection efficiency for the optimal feedback when the system reach the state of dynamic balance. In addition, the bigger the proportion of |1> is the higher the precision is and we will not obtain any information about the parameter to be estimated if |0> is chosen as initial state for the feedback type λσz.
A highly efficient single-photon source based on a quantum dot in a photonic nanowire
DEFF Research Database (Denmark)
Claudon, Julien; Bleuse, Joel; Malik, Nitin Singh
2010-01-01
The development of efficient solid-state sources of single photons is a major challenge in the context of quantum communication,optical quantum information processing and metrology1. Such a source must enable the implementation of a stable, single-photon emitter, like a colour centre in diamond2...... with carefully tailored ends13. Under optical pumping, we demonstrate a record source efficiency of 0.72, combined with pure single-photon emission. This non-resonant approach also provides broadband spontaneous emission control, thus offering appealing novel opportunities for the development of single...
High Efficiency Hybrid Solar Cells Using Nanocrystalline Si Quantum Dots and Si Nanowires.
Dutta, Mrinal; Thirugnanam, Lavanya; Trinh, Pham Van; Fukata, Naoki
2015-07-28
We report on an efficient hybrid Si nanocrystal quantum dot modified radial p-n junction thinner Si solar cell that utilizes the advantages of effective exciton collection by energy transfer from nanocrystal-Si (nc-Si) quantum dots to underlying radial p-n junction Si nanowire arrays with excellent carrier separation and propagation via the built-in electric fields of radial p-n junctions. Minimization of recombination, optical, and spectrum losses in this hybrid structure led to a high cell efficiency of 12.9%.
Very Efficient Single-Photon Sources Based on Quantum Dots in Photonic Wires
DEFF Research Database (Denmark)
Gerard, Jean-Michel; Claudon, Julien; Bleuse, Joel
2014-01-01
We review the recent development of high efficiency single photon sources based on a single quantum dot in a photonic wire. Unlike cavity-based devices, very pure single photon emission and efficiencies exceeding 0.7 photon per pulse are jointly demonstrated under non-resonant pumping conditions....... By placing a tip-shaped or trumpet-like tapering at the output end of the wire, a highly directional Gaussian far-field emission pattern is obtained. More generally, a photonic wire containing a quantum dot appears as an attractive template to explore and exploit in a solid-state system the unique optical...
Directory of Open Access Journals (Sweden)
Sabina Koleša
2014-09-01
Full Text Available The paper focuses on a country’s external trade policy management in relation to the processes within its sub national entities. Its main goal is to identify an optimal approach to realizing the national interests of a small EU member state at the international/sub national level. We argue that influence on certain decisions does not necessarily solely depend on the power (i. e., size of a country, but also depends on other factors, such as the country’s goals and ability to form alliances. We confirm that institutions are of key importance for efficient external trade policy management – small countries in particular can increase their influence at the international level substantially if they are capable of efficient process management and forming alliances with sub national actors. After analysing the systems in selected eu member states, we make proposals for enhancing the trade policy management process in Slovenia.
Efficient algorithms for large-scale quantum transport calculations
Brück, Sascha; Calderara, Mauro; Bani-Hashemian, Mohammad Hossein; VandeVondele, Joost; Luisier, Mathieu
2017-08-01
Massively parallel algorithms are presented in this paper to reduce the computational burden associated with quantum transport simulations from first-principles. The power of modern hybrid computer architectures is harvested in order to determine the open boundary conditions that connect the simulation domain with its environment and to solve the resulting Schrödinger equation. While the former operation takes the form of an eigenvalue problem that is solved by a contour integration technique on the available central processing units (CPUs), the latter can be cast into a linear system of equations that is simultaneously processed by SplitSolve, a two-step algorithm, on general-purpose graphics processing units (GPUs). A significant decrease of the computational time by up to two orders of magnitude is obtained as compared to standard solution methods.
A Novel Implementation of Efficient Algorithms for Quantum Circuit Synthesis
Zeller, Luke
In this project, we design and develop a computer program to effectively approximate arbitrary quantum gates using the discrete set of Clifford Gates together with the T gate (π/8 gate). Employing recent results from Mosca et. al. and Giles and Selinger, we implement a decomposition scheme that outputs a sequence of Clifford, T, and Tt gates that approximate the input to within a specified error range ɛ. Specifically, the given gate is first rounded to an element of Z[1/2, i] with a precision determined by ɛ, and then exact synthesis is employed to produce the resulting gate. It is known that this procedure is optimal in approximating an arbitrary single qubit gate. Our program, written in Matlab and Python, can complete both approximate and exact synthesis of qubits. It can be used to assist in the experimental implementation of an arbitrary fault-tolerant single qubit gate, for which direct implementation isn't feasible.
Robust and Efficient Sifting-Less Quantum Key Distribution Protocols
Grosshans, Frédéric
2009-01-01
We show that replacing the usual sifting step of the standard quantum-key-distribution protocol BB84 by a one-way reverse reconciliation procedure increases its robustness against photon-number-splitting (PNS) attacks to the level of the SARG04 protocol while keeping the raw key-rate of BB84. This protocol, which uses the same state and detection than BB84, is the m=4 member of a protocol-family using m polarization states which we introduce here. We show that the robustness of these protocols against PNS attacks increases exponentially with m, and that the effective keyrate of optimized weak coherent pulses decreases with the transmission T like T^{1+1/(m-2)}.
Efficient implementation of the continuous-time hybridization expansion quantum impurity solver
Hafermann, Hartmut; Werner, Philipp; Gull, Emanuel
2013-04-01
Strongly correlated quantum impurity problems appear in a wide variety of contexts ranging from nanoscience and surface physics to material science and the theory of strongly correlated lattice models, where they appear as auxiliary systems within dynamical mean-field theory. Accurate and unbiased solutions must usually be obtained numerically, and continuous-time quantum Monte Carlo algorithms, a family of algorithms based on the stochastic sampling of partition function expansions, perform well for such systems. With the present paper we provide an efficient and generic implementation of the hybridization expansion quantum impurity solver, based on the segment representation. We provide a complete implementation featuring most of the recently developed extensions and optimizations. Our implementation allows one to treat retarded interactions and provides generalized measurement routines based on improved estimators for the self-energy and for vertex functions. The solver is embedded in the ALPS-DMFT application package. Catalogue identifier: AEOL_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOL_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Use of the hybridization expansion impurity solvers requires citation of this paper. Use of any ALPS program requires citation of the ALPS [1] paper. No. of lines in distributed program, including test data, etc.: 650044 No. of bytes in distributed program, including test data, etc.: 20553265 Distribution format: tar.gz Programming language: C++/Python. Computer: Desktop PC, high-performance computers. Operating system: Unix, Linux, OSX, Windows. Has the code been vectorized or parallelized?: Yes, MPI parallelized. RAM: 1 GB Classification: 7.3. External routines: ALPS [1, 2, 3], BLAS [4, 5], LAPACK [6], HDF5 [7] Nature of problem: Quantum impurity models were originally introduced to describe a magnetic transition metal ion in a non
Azevedo, F S; Castro, Luis B; Filgueiras, Cleverson; Cogollo, D
2015-01-01
The planar quantum dynamics of spin-1/2 neutral particle interacting with electrical fields is considered. A set of first order differential equations are obtained directly from the planar Dirac equation with nonminimum coupling. New solutions of this system, in particular, for the Aharonov-Casher effect, are found and discussed in detail. Pauli equation is also obtained by studying the motion of the particle when it describes a circular path of constant radius. We also analyze the planar dynamics in the full space, including the $r=0$ region. The self-adjoint extension method is used to obtain the energy levels and wave functions of the particle for two particular values for the self-adjoint extension parameter. The energy levels obtained are analogous to the Landau levels and explicitly depend on the spin projection parameter.
Scaling-up quantum heat engines efficiently via shortcuts to adiabaticity
Beau, M; del Campo, A
2016-01-01
The finite-time operation of a quantum heat engine that uses a single particle as a working medium generally increases the output power at the expense of inducing friction that lowers the cycle efficiency. We propose to scale up a quantum heat engine utilizing a many-particle working medium in combination with the use of shortcuts to adiabaticity to boost the nonadiabatic performance by eliminating quantum friction and reducing the cycle time. To this end, we first analyze the finite-time thermodynamics of a quantum Otto cycle implemented with a quantum fluid confined in a time-dependent harmonic trap. We show that nonadiabatic effects can be controlled and tailored to match the adiabatic performance using a variety of shortcuts to adiabaticity. As a result, the nonadiabatic dynamics of the scaled-up many-particle quantum heat engine exhibits no friction and the cycle can be run at maximum efficiency with a tunable output power. We demonstrate our results with a working medium consisting of particles with inv...
Scaling-Up Quantum Heat Engines Efficiently via Shortcuts to Adiabaticity
Directory of Open Access Journals (Sweden)
Mathieu Beau
2016-04-01
Full Text Available The finite-time operation of a quantum heat engine that uses a single particle as a working medium generally increases the output power at the expense of inducing friction that lowers the cycle efficiency. We propose to scale up a quantum heat engine utilizing a many-particle working medium in combination with the use of shortcuts to adiabaticity to boost the nonadiabatic performance by eliminating quantum friction and reducing the cycle time. To this end, we first analyze the finite-time thermodynamics of a quantum Otto cycle implemented with a quantum fluid confined in a time-dependent harmonic trap. We show that nonadiabatic effects can be controlled and tailored to match the adiabatic performance using a variety of shortcuts to adiabaticity. As a result, the nonadiabatic dynamics of the scaled-up many-particle quantum heat engine exhibits no friction, and the cycle can be run at maximum efficiency with a tunable output power. We demonstrate our results with a working medium consisting of particles with inverse-square pairwise interactions that includes non-interacting and hard-core bosons as limiting cases.
Li, Tao; Deng, Fu-Guo
2015-10-27
Quantum repeater is one of the important building blocks for long distance quantum communication network. The previous quantum repeaters based on atomic ensembles and linear optical elements can only be performed with a maximal success probability of 1/2 during the entanglement creation and entanglement swapping procedures. Meanwhile, the polarization noise during the entanglement distribution process is harmful to the entangled channel created. Here we introduce a general interface between a polarized photon and an atomic ensemble trapped in a single-sided optical cavity, and with which we propose a high-efficiency quantum repeater protocol in which the robust entanglement distribution is accomplished by the stable spatial-temporal entanglement and it can in principle create the deterministic entanglement between neighboring atomic ensembles in a heralded way as a result of cavity quantum electrodynamics. Meanwhile, the simplified parity-check gate makes the entanglement swapping be completed with unity efficiency, other than 1/2 with linear optics. We detail the performance of our protocol with current experimental parameters and show its robustness to the imperfections, i.e., detuning and coupling variation, involved in the reflection process. These good features make it a useful building block in long distance quantum communication.
DEFF Research Database (Denmark)
Leistikow, M.D.; Johansen, Jeppe; Kettelarij, A.J.;
2009-01-01
, allowing us to determine the size-dependent quantum efficiency and oscillator strength. We find that the quantum efficiency decreases with increasing emission energy mostly due to an increase in nonradiative decay. We manage to obtain the oscillator strength of the important class of CdSe quantum dots....... The oscillator strength varies weakly with frequency in agreement with behavior of quantum dots in the strong confinement limit. Surprisingly, previously calculated tight-binding results differ by a factor of 5 with the measured absolute values. Results from pseudopotential calculations agree well...
McMahon, Walter W., Ed.; Boediono, Ed.
External inefficiency in education--inequity between the characteristics of graduates and the job market--is a problem in Indonesia and many other countries. Job markets at the junior secondary level are very tight in Indonesia with low levels of unemployment at all ages, short job-search times, and high real rates of return. Unemployment,…
Han, Shikui
2017-07-04
Preparation of two-dimensional (2D) heterostructures is important not only fundamentally, but also technologically for applications in electronics and optoelectronics. Herein, we report a facile colloidal method for the synthesis of WOn -WX2 (n=2.7, 2.9; X=S, Se) heterostructures by sulfurization or selenization of WOn nanomaterials. The WOn -WX2 heterostructures are composed of WO2.9 nanoparticles (NPs) or WO2.7 nanowires (NWs) grown together with single- or few-layer WX2 nanosheets (NSs). As a proof-of-concept application, the WOn -WX2 heterostructures are used as the anode interfacial buffer layer for green quantum dot light-emitting diodes (QLEDs). The QLED prepared with WO2.9 NP-WSe2 NS heterostructures achieves external quantum efficiency (EQE) of 8.53 %. To our knowledge, this is the highest efficiency in the reported green QLEDs using inorganic materials as the hole injection layer.
Step-by-step magic state encoding for efficient fault-tolerant quantum computation
Goto, Hayato
2014-01-01
Quantum error correction allows one to make quantum computers fault-tolerant against unavoidable errors due to decoherence and imperfect physical gate operations. However, the fault-tolerant quantum computation requires impractically large computational resources for useful applications. This is a current major obstacle to the realization of a quantum computer. In particular, magic state distillation, which is a standard approach to universality, consumes the most resources in fault-tolerant quantum computation. For the resource problem, here we propose step-by-step magic state encoding for concatenated quantum codes, where magic states are encoded step by step from the physical level to the logical one. To manage errors during the encoding, we carefully use error detection. Since the sizes of intermediate codes are small, it is expected that the resource overheads will become lower than previous approaches based on the distillation at the logical level. Our simulation results suggest that the resource requirements for a logical magic state will become comparable to those for a single logical controlled-NOT gate. Thus, the present method opens a new possibility for efficient fault-tolerant quantum computation. PMID:25511387
Step-by-step magic state encoding for efficient fault-tolerant quantum computation.
Goto, Hayato
2014-12-16
Quantum error correction allows one to make quantum computers fault-tolerant against unavoidable errors due to decoherence and imperfect physical gate operations. However, the fault-tolerant quantum computation requires impractically large computational resources for useful applications. This is a current major obstacle to the realization of a quantum computer. In particular, magic state distillation, which is a standard approach to universality, consumes the most resources in fault-tolerant quantum computation. For the resource problem, here we propose step-by-step magic state encoding for concatenated quantum codes, where magic states are encoded step by step from the physical level to the logical one. To manage errors during the encoding, we carefully use error detection. Since the sizes of intermediate codes are small, it is expected that the resource overheads will become lower than previous approaches based on the distillation at the logical level. Our simulation results suggest that the resource requirements for a logical magic state will become comparable to those for a single logical controlled-NOT gate. Thus, the present method opens a new possibility for efficient fault-tolerant quantum computation.
Efficient interfacing of light and surface plasmon polaritons for quantum optics applications
DEFF Research Database (Denmark)
Eran, Kot
control of matter. These include applications such as efficient photon collection, single-photon switching and transistors, and long-range optical coupling of quantum bits for quantum communications. However, generating and controlling strong coherent interaction between otherwise very weakly interacting...... interaction are the window to the underlying quantum world. It is no surprise then that there has always been push to find more, and gain better control over systems in which this interaction can be studied. In the past two decades, this end was further motivated as applications were envisioned to coherent...... light and quantum emitters proves a difficult task. Current days solutions range from cavities, atomic ensembles, photonic band gaps structures, ion traps and optical latices are all being improved and studied but none has yet to emerge as superior. Recently, another proposal for such a strong coupling...
Efficient spin filter using multi-terminal quantum dot with spin-orbit interaction
Directory of Open Access Journals (Sweden)
Yokoyama Tomohiro
2011-01-01
Full Text Available Abstract We propose a multi-terminal spin filter using a quantum dot with spin-orbit interaction. First, we formulate the spin Hall effect (SHE in a quantum dot connected to three leads. We show that the SHE is significantly enhanced by the resonant tunneling if the level spacing in the quantum dot is smaller than the level broadening. We stress that the SHE is tunable by changing the tunnel coupling to the third lead. Next, we perform a numerical simulation for a multi-terminal spin filter using a quantum dot fabricated on semiconductor heterostructures. The spin filter shows an efficiency of more than 50% when the conditions for the enhanced SHE are satisfied. PACS numbers: 72.25.Dc,71.70.Ej,73.63.Kv,85.75.-d
Salant, Asaf; Shalom, Menny; Hod, Idan; Faust, Adam; Zaban, Arie; Banin, Uri
2010-10-26
Quantum dot sensitized solar cells (QDSSC) may benefit from the ability to tune the quantum dot optical properties and band gap through the manipulation of their size and composition. Moreover, the inorganic nanocrystals may provide increased stability compared to organic sensitizers. We report the facile fabrication of QDSSC by electrophoretic deposition of CdSe QDs onto conducting electrodes coated with mesoporous TiO(2). Unlike prior chemical linker-based methods, no pretreatment of the TiO(2) was needed, and deposition times as short as 2 h were sufficient for effective coating. Cross-sectional chemical analysis shows that the Cd content is nearly constant across the entire TiO(2) layer. The dependence of the deposition on size was studied and successfully applied to CdSe dots with diameters between 2.5 and 5.5 nm as well as larger CdSe quantum rods. The photovoltaic characteristics of the devices are greatly improved compared with those achieved for cells prepared with a linker approach, reaching efficiencies as high as 1.7%, under 1 sun illumination conditions, after treating the coated electrodes with ZnS. Notably, the absorbed photon to electron conversion efficiencies did not show a clear size-dependence indicating efficient electron injection even for the larger QD sizes. The electrophoretic deposition method can be easily expanded and applied for preparations of QDSSCs using diverse colloidal quantum dot and quantum rod materials for sensitization.
Optical excitation and external photoluminescence quantum efficiency of Eu3+ in GaN
de Boer, W.D.A.M.; McGonigle, C.; Gregorkiewicz, T.; Fujiwara, Y.; Stallinga, P.
2014-01-01
We investigate photoluminescence of Eu-related emission in a GaN host consisting of thin layers grown by organometallic vapor-phase epitaxy. By comparing it with a reference sample of Eu-doped Y2O3, we find that the fraction of Eu3+ ions that can emit light upon optical excitation is of the order of
Nikiforov, Alexander; Gamez, Jose A; Thiel, Walter; Filatov, Michael
2016-01-07
Two new light-driven molecular rotary motors based on the N-alkylated indanylidene benzopyrrole frameworks are proposed and studied using quantum chemical calculations and nonadiabatic molecular dynamics simulations. These new motors perform pure axial rotation, and the photochemical steps of the rotary cycle are dominated by the fast bond-length-alternation motion that enables ultrafast access to the S1/S0 intersection. The new motors are predicted to display a quantum efficiency higher than that of the currently available synthetic all-hydrocarbon motors. Remarkably, the quantum efficiency is not governed by the topography (peaked versus sloped) of the minimum-energy conical intersection, whereas the S1 decay time depends on the topography as well as on the energy of the intersection relative to the S1 minimum. It is the axial chirality (helicity), rather than the point chirality, that controls the sense of rotation of the motor.
Efficient Dielectric Metasurface Collimating Lenses for Mid-Infrared Quantum Cascade Lasers
Arbabi, Amir; Horie, Yu; Bagheri, Mahmood; Faraon, Andrei
2015-01-01
Light emitted from single-mode semiconductor lasers generally has large divergence angles, and high numerical aperture lenses are required for beam collimation. Visible and near infrared lasers are collimated using aspheric glass or plastic lenses, yet collimation of mid-infrared quantum cascade lasers typically requires more costly aspheric lenses made of germanium, chalcogenide compounds, or other infrared-transparent materials. Here we report mid-infrared dielectric metasurface flat lenses that efficiently collimate the output beam of single-mode quantum cascade lasers. The metasurface lenses are composed of amorphous silicon posts on a flat sapphire substrate and can be fabricated at low cost using a single step conventional UV binary lithography. Mid-infrared radiation from a 4.8 $\\mu$m distributed-feedback quantum cascade laser is collimated using a polarization insensitive metasurface lens with 0.86 numerical aperture and 79% transmission efficiency. The collimated beam has a half divergence angle of 0...
Lei, Fengcai; Liu, Wei; Sun, Yongfu; Xu, Jiaqi; Liu, Katong; Liang, Liang; Yao, Tao; Pan, Bicai; Wei, Shiqiang; Xie, Yi
2016-09-01
Ultrathin metal layers can be highly active carbon dioxide electroreduction catalysts, but may also be prone to oxidation. Here we construct a model of graphene confined ultrathin layers of highly reactive metals, taking the synthetic highly reactive tin quantum sheets confined in graphene as an example. The higher electrochemical active area ensures 9 times larger carbon dioxide adsorption capacity relative to bulk tin, while the highly-conductive graphene favours rate-determining electron transfer from carbon dioxide to its radical anion. The lowered tin-tin coordination numbers, revealed by X-ray absorption fine structure spectroscopy, enable tin quantum sheets confined in graphene to efficiently stabilize the carbon dioxide radical anion, verified by 0.13 volts lowered potential of hydroxyl ion adsorption compared with bulk tin. Hence, the tin quantum sheets confined in graphene show enhanced electrocatalytic activity and stability. This work may provide a promising lead for designing efficient and robust catalysts for electrolytic fuel synthesis.
Highly efficient multiple-layer CdS quantum dot sensitized III-V solar cells.
Lin, Chien-Chung; Han, Hau-Vei; Chen, Hsin-Chu; Chen, Kuo-Ju; Tsai, Yu-Lin; Lin, Wein-Yi; Kuo, Hao-Chung; Yu, Peichen
2014-02-01
In this review, the concept of utilization of solar spectrum in order to increase the solar cell efficiency is discussed. Among the three mechanisms, down-shifting effect is investigated in detail. Organic dye, rare-earth minerals and quantum dots are three most popular down-shift materials. While the enhancement of solar cell efficiency was not clearly observed in the past, the advances in quantum dot fabrication have brought strong response out of the hybrid platform of a quantum dot solar cell. A multiple layer structure, including PDMS as the isolation layer, is proposed and demonstrated. With the help of pulse spray system, precise control can be achieved and the optimized concentration can be found.
Spectral difference Lanczos method for efficient time propagation in quantum control theory.
Farnum, John D; Mazziotti, David A
2004-04-01
Spectral difference methods represent the real-space Hamiltonian of a quantum system as a banded matrix which possesses the accuracy of the discrete variable representation (DVR) and the efficiency of finite differences. When applied to time-dependent quantum mechanics, spectral differences enhance the efficiency of propagation methods for evolving the Schrodinger equation. We develop a spectral difference Lanczos method which is computationally more economical than the sinc-DVR Lanczos method, the split-operator technique, and even the fast-Fourier-Transform Lanczos method. Application of fast propagation is made to quantum control theory where chirped laser pulses are designed to dissociate both diatomic and polyatomic molecules. The specificity of the chirped laser fields is also tested as a possible method for molecular identification and discrimination.
Efficient Path Finding with the Sweep-Line Method using External Storage
DEFF Research Database (Denmark)
Kristensen, Lars Michael; Mailund, Thomas
2003-01-01
space exploration and gives the same reduction in peak memory usage as the stand-alone sweep-line method. We evaluate the proposed technique on a number of example systems, and compare its performance to a related technique. These practical experiments demonstrate how the suggested technique complements......The sweep-line method deletes states on-the-fly during state space exploration to reduce peak memory usage. This deletion of states prohibits the immediate generation of, e.g., an error-trace when the violation of a safety property is detected. We address this problem by combining the sweep......-line method with storing a spanning tree of the explored state space in external storage on a magnetic disk. We show how this allows us to easily obtain paths in the state space, such as error-traces. A key property of the proposed technique is that it avoids searching in external storage during the state...
Confidence and efficiency scaling in Variational Quantum Monte Carlo calculations
Delyon, François; Holzmann, Markus
2016-01-01
Based on the central limit theorem, we discuss the problem of evaluation of the statistical error of Monte Carlo calculations using a time discretized diffusion process. We present a robust and practical method to determine the effective variance of general observables and show how to verify the equilibrium hypothesis by the Kolmogorov-Smirnov test. We then derive scaling laws of the efficiency illustrated by Variational Monte Carlo calculations on the two dimensional electron gas.
Confidence and efficiency scaling in variational quantum Monte Carlo calculations
Delyon, F.; Bernu, B.; Holzmann, Markus
2017-02-01
Based on the central limit theorem, we discuss the problem of evaluation of the statistical error of Monte Carlo calculations using a time-discretized diffusion process. We present a robust and practical method to determine the effective variance of general observables and show how to verify the equilibrium hypothesis by the Kolmogorov-Smirnov test. We then derive scaling laws of the efficiency illustrated by variational Monte Carlo calculations on the two-dimensional electron gas.
Simple formalism for efficient derivatives and multi-determinant expansions in quantum Monte Carlo
Filippi, C.; Assaraf, R.; Moroni, S.
2016-01-01
We present a simple and general formalism to compute efficiently the derivatives of a multi-determinant Jastrow-Slater wave function, the local energy, the interatomic forces, and similar quantities needed in quantum Monte Carlo. Through a straightforward manipulation of matrices evaluated on the oc
The effect of nonadiabaticity on the efficiency of quantum memory based on an optical cavity
Veselkova, N. G.; Sokolov, I. V.
2017-07-01
Quantum efficiency is an important characteristic of quantum memory devices that are aimed at recording the quantum state of light signals and its storing and reading. In the case of memory based on an ensemble of cold atoms placed in an optical cavity, the efficiency is restricted, in particular, by relaxation processes in the system of active atomic levels. We show how the effect of the relaxation on the quantum efficiency can be determined in a regime of the memory usage in which the evolution of signals in time is not arbitrarily slow on the scale of the field lifetime in the cavity and when the frequently used approximation of the adiabatic elimination of the quantized cavity mode field cannot be applied. Taking into account the effect of the nonadiabaticity on the memory quality is of interest in view of the fact that, in order to increase the field-medium coupling parameter, a higher cavity quality factor is required, whereas storing and processing of sequences of many signals in the memory implies that their duration is reduced. We consider the applicability of the well-known efficiency estimates via the system cooperativity parameter and estimate a more general form. In connection with the theoretical description of the memory of the given type, we also discuss qualitative differences in the behavior of a random source introduced into the Heisenberg-Langevin equations for atomic variables in the cases of a large and a small number of atoms.
Quantum efficiencies exceeding unity due to impact ionization in silicon solar cells
Kolodinski, Sabine; Werner, Jürgen H.; Wittchen, Thomas; Queisser, Hans J.
1993-10-01
Absolute measurements demonstrate internal quantum efficiencies in silicon solar cells to exceed unity for photon energies above the first direct band gap and to show distinct spectral features that correspond to specific points in the Brillouin zone. Ultraviolet radiation can generate hot carriers with sufficient energy to cause impact ionization which results in two electron hole pairs per incident photon.
A novel high-efficiency single-mode quantum dot single photon source
DEFF Research Database (Denmark)
Gerard, J.M.; Gregersen, Niels; Nielsen, Torben Roland
2008-01-01
We present a novel single-mode single photon source exploiting the emission of a semiconductor quantum dot (QD) located inside a photonic wire. Besides an excellent coupling (>95%) of QD spontaneous emission to the fundamental guided mode [1], we show that a single photon collection efficiency...
Design Rules for High-Efficiency Quantum-Dot-Sensitized Solar Cells: A Multilayer Approach.
Shalom, Menny; Buhbut, Sophia; Tirosh, Shay; Zaban, Arie
2012-09-06
The effect of multilayer sensitization in quantum-dot (QD)-sensitized solar cells is reported. A series of electrodes, consisting of multilayer CdSe QDs were assembled on a compact TiO2 layer. Photocurrent measurements along with internal quantum efficiency calculation reveal similar electron collection efficiency up to a 100 nm thickness of the QD layers. Moreover, the optical density and the internal quantum efficiency measurements reveal that the desired surface area of the TiO2 electrode should be increased only by a factor of 17 compared with a compact electrode. We show that the sensitization of low-surface-area TiO2 electrode with QD layers increases the performance of the solar cell, resulting in 3.86% efficiency. These results demonstrate a conceptual difference between the QD-sensitized solar cell and the dye-based system in which dye multilayer decreases the cell performance. The utilization of multilayer QDs opens new opportunities for a significant improvement of quantum-dot-sensitized solar cells via innovative cell design.
LHCb: Quantum Efficiency of Hybrid Photon Detectors for the LHCb RICH
Lambert, Robert W
2007-01-01
The production of 550 hybrid photon detectors to be used within the LHCb RICH detectors has recently finished. Photonis-DEP have succeeded in consistently improving the tube quantum efficiency, by a relative 27,% with respect to preseries and prototype tubes, when integrated over the energy spectrum.
Efficient scheme for preparation of the multi-atom W state via cavity quantum electrodynamics
Institute of Scientific and Technical Information of China (English)
Zhang Jin; Ye Liu
2004-01-01
We present an efficient scheme for preparation of the multi-atom W state via cavity quantum electrodynamics.Involved in this scheme are n identical two-level atoms and a single-mode cavity field. Discussion indicates that this scheme can be realized easily by current technologies.
Wu, Feilong; He, Jizhou; Ma, Yongli; Wang, Jianhui
2014-12-01
We consider the efficiency at maximum power of a quantum Otto engine, which uses a spin or a harmonic system as its working substance and works between two heat reservoirs at constant temperatures Th and Tc (Otto engine working in the linear-response regime.
Yassitepe, Emre
2016-10-31
Cesium lead halide perovskite quantum dots (PQDs) have attracted significant interest for optoelectronic applications in view of their high brightness and narrow emission linewidth at visible wavelengths. A remaining challenge is the degradation of PQDs during purification from the synthesis solution. This is attributed to proton transfer between oleic acid and oleylamine surface capping agents that leads to facile ligand loss. Here, a new synthetic method is reported that enhances the colloidal stability of PQDs by capping them solely using oleic acid (OA). Quaternary alkylammonium halides are used as precursors, eliminating the need for oleylamine. This strategy enhances the colloidal stability of OA capped PQDs during purification, allowing us to remove excess organic content in thin films. Inverted red, green, and blue PQD light-emitting diodes (LED) are fabricated for the first time with solution-processed polymer-based hole transport layers due to higher robustness of OA capped PQDs to solution processing. The blue and green LEDs exhibit threefold and tenfold improved external quantum efficiency (EQE), respectively, compared to prior related reports for amine/ammonium capped cross-linked PQDs. The brightest blue LED based on all inorganic CsPb(Br1- xClx)3 PQDs is also reported. Â© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Gómez-Bombarelli, Rafael; Aguilera-Iparraguirre, Jorge; Hirzel, Timothy D.; Ha, Dong-Gwang; Einzinger, Markus; Wu, Tony; Baldo, Marc A.; Aspuru-Guzik, Alán.
2016-09-01
Discovering new OLED emitters requires many experiments to synthesize candidates and test performance in devices. Large scale computer simulation can greatly speed this search process but the problem remains challenging enough that brute force application of massive computing power is not enough to successfully identify novel structures. We report a successful High Throughput Virtual Screening study that leveraged a range of methods to optimize the search process. The generation of candidate structures was constrained to contain combinatorial explosion. Simulations were tuned to the specific problem and calibrated with experimental results. Experimentalists and theorists actively collaborated such that experimental feedback was regularly utilized to update and shape the computational search. Supervised machine learning methods prioritized candidate structures prior to quantum chemistry simulation to prevent wasting compute on likely poor performers. With this combination of techniques, each multiplying the strength of the search, this effort managed to navigate an area of molecular space and identify hundreds of promising OLED candidate structures. An experimentally validated selection of this set shows emitters with external quantum efficiencies as high as 22%.
Area laws and efficient descriptions of quantum many-body states
Ge, Yimin; Eisert, Jens
2016-08-01
It is commonly believed that area laws for entanglement entropies imply that a quantum many-body state can be faithfully represented by efficient tensor network states—a conjecture frequently stated in the context of numerical simulations and analytical considerations. In this work, we show that this is in general not the case, except in one-dimension. We prove that the set of quantum many-body states that satisfy an area law for all Renyi entropies contains a subspace of exponential dimension. We then show that there are states satisfying area laws for all Renyi entropies but cannot be approximated by states with a classical description of small Kolmogorov complexity, including polynomial projected entangled pair states or states of multi-scale entanglement renormalisation. Not even a quantum computer with post-selection can efficiently prepare all quantum states fulfilling an area law, and we show that not all area law states can be eigenstates of local Hamiltonians. We also prove translationally and rotationally invariant instances of these results, and show a variation with decaying correlations using quantum error-correcting codes.
Near-unity coupling efficiency of a quantum emitter to a photonic crystal waveguide.
Arcari, M; Söllner, I; Javadi, A; Lindskov Hansen, S; Mahmoodian, S; Liu, J; Thyrrestrup, H; Lee, E H; Song, J D; Stobbe, S; Lodahl, P
2014-08-29
A quantum emitter efficiently coupled to a nanophotonic waveguide constitutes a promising system for the realization of single-photon transistors, quantum-logic gates based on giant single-photon nonlinearities, and high bit-rate deterministic single-photon sources. The key figure of merit for such devices is the β factor, which is the probability for an emitted single photon to be channeled into a desired waveguide mode. We report on the experimental achievement of β=98.43%±0.04% for a quantum dot coupled to a photonic crystal waveguide, corresponding to a single-emitter cooperativity of η=62.7±1.5. This constitutes a nearly ideal photon-matter interface where the quantum dot acts effectively as a 1D "artificial" atom, since it interacts almost exclusively with just a single propagating optical mode. The β factor is found to be remarkably robust to variations in position and emission wavelength of the quantum dots. Our work demonstrates the extraordinary potential of photonic crystal waveguides for highly efficient single-photon generation and on-chip photon-photon interaction.
Efficient method for calculating electronic bound states in arbitrary one-dimensional quantum wells
de Aquino, V. M.; Iwamoto, H.; Dias, I. F. L.; Laureto, E.; da Silva, M. A. T.; da Silva, E. C. F.; Quivy, A. A.
2017-01-01
In the present paper it is demonstrated that the bound electronic states of multiple quantum wells structures may be calculated very efficiently by expanding their eigenstates in terms of the eigenfunctions of a particle in a box. The bound states of single and multiple symmetric or nonsymmetric wells are calculated within the single-band effective mass approximation. A comparison is then made between the results obtained for simple cases with exact calculations. We also apply our approach to a GaAs/AlGaAs multiple quantum well structure composed of forty periods each one with seven quantum wells. The method may be very useful to design narrow band quantum cascade photodetectors to work without applied bias in a photovoltaic mode. With the presented method the effects of a electric field may also be easily included which is very important if one desires study quantum well structures for application to the development of quantum cascade lasers. The advantages of the method are also presented.
Functional Basis for Efficient Physical Layer Classical Control in Quantum Processors
Ball, Harrison; Nguyen, Trung; Leong, Philip H. W.; Biercuk, Michael J.
2016-12-01
The rapid progress seen in the development of quantum-coherent devices for information processing has motivated serious consideration of quantum computer architecture and organization. One topic which remains open for investigation and optimization relates to the design of the classical-quantum interface, where control operations on individual qubits are applied according to higher-level algorithms; accommodating competing demands on performance and scalability remains a major outstanding challenge. In this work, we present a resource-efficient, scalable framework for the implementation of embedded physical layer classical controllers for quantum-information systems. Design drivers and key functionalities are introduced, leading to the selection of Walsh functions as an effective functional basis for both programing and controller hardware implementation. This approach leverages the simplicity of real-time Walsh-function generation in classical digital hardware, and the fact that a wide variety of physical layer controls, such as dynamic error suppression, are known to fall within the Walsh family. We experimentally implement a real-time field-programmable-gate-array-based Walsh controller producing Walsh timing signals and Walsh-synthesized analog waveforms appropriate for critical tasks in error-resistant quantum control and noise characterization. These demonstrations represent the first step towards a unified framework for the realization of physical layer controls compatible with large-scale quantum-information processing.
Heterostructures for Increased Quantum Efficiency in Nitride LEDs
Energy Technology Data Exchange (ETDEWEB)
Davis, Robert F. [Carnegie Mellon Univ., Pittsburgh, PA (United States)
2010-09-30
Task 1. Development of an advanced LED simulator useful for the design of efficient nitride-based devices. Simulator will contain graphical interface software that can be used to specify the device structure, the material parameters, the operating conditions and the desired output results. Task 2. Theoretical and experimental investigations regarding the influence on the microstructure, defect concentration, mechanical stress and strain and IQE of controlled changes in the chemistry and process route of deposition of the buffer layer underlying the active region of nitride-based blue- and greenemitting LEDs. Task 3. Theoretical and experimental investigations regarding the influence on the physical properties including polarization and IQE of controlled changes in the geometry, chemistry, defect density, and microstructure of components in the active region of nitride-based blue- and green-emitting LEDs. Task 4. Theoretical and experimental investigations regarding the influence on IQE of novel heterostructure designs to funnel carriers into the active region for enhanced recombination efficiency and elimination of diffusion beyond this region. Task 5. Theoretical and experimental investigations regarding the influence of enhanced p-type doping on the chemical, electrical, and microstructural characteristics of the acceptor-doped layers, the hole injection levels at Ohmic contacts, the specific contact resistivity and the IQE of nitride-based blue- and green-emitting LEDs. Development and optical and electrical characterization of reflective Ohmic contacts to n- and p-type GaN films.
Optimal Power and Efficiency of Quantum Thermoacoustic Micro-cycle Working in 1D Harmonic Trap
E, Qing; Wu, Feng; Yin, Yong; Liu, XiaoWei
2017-10-01
Thermoacoustic engines (including heat engines and refrigerators) are energy conversion devices without moving part. They have great potential in aviation, new energy utilization, power technology, refrigerating and cryogenics. The thermoacoustic parcels, which compose the working fluid of a thermoacoustic engine, oscillate within the sound channel with a temperature gradient. The thermodynamic foundation of a thermoacoustic engine is the thermoacoustic micro-cycle (TAMC). In this paper, the theory of quantum mechanics is applied to the study of the actual thermoacoustic micro-cycle for the first time. A quantum mechanics model of the TAMC working in a 1D harmonic trap, which is named as a quantum thermoacoustic micro-cycle (QTAMC), is established. The QTAMC is composed of two constant force processes connected by two straight line processes. Analytic expressions of the power output and the efficiency for QTAMC have been derived. The effects of the trap width and the temperature amplitude on the power output and the thermal efficiency have been discussed. Some optimal characteristic curves of power output versus efficiency are plotted, and then the optimization region of QTAMC is given in this paper. The results obtained here not only enrich the thermoacoustic theory but also expand the application of quantum thermodynamics.
Negentropy as a source of efficiency: a nonequilibrium quantum Otto cycle
Li, Hai; Zou, Jian; Yu, Wen-Li; Li, Lin; Xu, Bao-Ming; Shao, Bin
2013-07-01
We consider a single quantum mechanical particle confined to an one-dimensional (1D) infinite square well, and propose a nonequilibrium quantum Otto cycle (NQOC). Compared with the conventional quantum Otto engine (CQOE) investigated by [T.D. Kieu, Phys. Rev. Lett. 93, 140403 (2004); T.D. Kieu, Eur. Phys. J. D 39, 115 (2006)], due to the effects of negentropy produced in the NQOC, many interesting features appear: (1) in general, the NQOC is capable of extracting more work, so it is more efficient; (2) the NQOC can operate even when T 1 = T 2 or T 1 < T 2, where T 1 ( T 2) represents the temperature of hot (cold) bath; (3) in some cases, the NQOC can absorb heat from both baths and completely transforms them into work. These results demonstrate that the negentropy can be understood as an effective source of efficiency in quantum heat engines (QHEs) and meanwhile it is shown that the second law of thermodynamics is not violated. At last, we also show that the efficiency of NQOC reduces to that of classical Otto cycle in the classical limit.
Efficient exciton funneling in cascaded PbS quantum dot superstructures.
Xu, Fan; Ma, Xin; Haughn, Chelsea R; Benavides, Jamie; Doty, Matthew F; Cloutier, Sylvain G
2011-12-27
Benzenedithiol (BDT) and ethanedithiol (EDT) ligand-exchange treatments can be used to cross-link colloidal PbS quantum dots into nanocrystalline film structures with distinct optoelectronic properties. Such structures can provide a unique platform to study the energy transfer between layers of quantum dots with different sizes. In this report, efficient exciton funneling and recycling of surface state-bound excitons is observed in cascaded PbS quantum dot-based multilayered superstructures, where the excitons transfer from the larger band gap or donor layers to the smallest band gap or acceptor layers. In this system, both the BDT- and EDT-treated cascaded structures exhibit dramatically enhanced photoluminescence from the acceptor layers. As we show, the energy transfer mechanisms involved and their efficiencies are significantly different depending on the ligand-exchange treatment. In the future, we believe these efficient exciton recycling and funneling mechanisms could be used to improve significantly the photocurrent, charge-transport, and conversion efficiencies in low-cost nanocrystalline and hybrid solar cells and the emission efficiencies in hybrid light-emitting devices.
Highly efficient CdS-quantum-dot-sensitized GaAs solar cells.
Lin, Chien-Chung; Chen, Hsin-Chu; Tsai, Yu Lin; Han, Hau-Vei; Shih, Huai-Shiang; Chang, Yi-An; Kuo, Hao-Chung; Yu, Peichen
2012-03-12
We demonstrate a hybrid design of traditional GaAs-based solar cell combined with colloidal CdS quantum dots. With anti-reflective feature at long wavelength and down-conversion at UV regime, the CdS quantum dot effectively enhance the overall power conversion efficiency by as high as 18.9% compared to traditional GaAs-based device. A more detailed study showed an increase of surface photoconductivity due to UV presence, and the fill factor of the solar cell can be improved accordingly.
Quantum efficiencies of the photo-Fenton degradation of atrazine in water.
Benzaquén, T B; Isla, M A; Alfano, O M
2012-01-01
An experimental work in a well-stirred batch recycling reactor for the photo-Fenton degradation of atrazine in water is presented. A study of the quantum efficiency is performed to assess the effectiveness of the photo-Fenton process on the atrazine degradation and total organic carbon (TOC) mineralization. Apparent and absolute quantum efficiencies of degradation and mineralization of an atrazine-based commercial herbicide are determined under different experimental conditions. Higher apparent efficiencies were found for both atrazine degradation and TOC mineralization when the ferric ion and hydrogen peroxide concentrations are increased. Because of the well known stability of the triazine ring, atrazine was not completely mineralized by the photo-Fenton process. However, a TOC reduction of 40% was achieved, being 62.5% of the maximum value that can be reached.
Efficient Multiparty Quantum Secret Sharing with Greenberger-Horne-Zeilinger States
Institute of Scientific and Technical Information of China (English)
DENG Fu-Guo; ZHOU Ping; LI Xi-Han; LI Chun-Yan; ZHOU Hong-Yu
2006-01-01
@@ An efficient multiparty quantum secret sharing scheme is proposed with Greenberger-Horne-Zeilinger (GHZ)states following some ideas in quantum dense coding. The agents take the single-photon measurements on the photons received for eavesdropping check and exploit the four local unitary operations I, σz, σx and iσy tocode their message. This scheme has the advantage of high capacity as each GHZ state can carry two bits of information. The parties do not need to announce the measuring bases for almost all the photons, which will reduce the classical information exchanged largely. The intrinsic efficiency for qubits and the total efficiency both approach the maximal values.
Wu, Feilong; He, Jizhou; Ma, Yongli; Wang, Jianhui
2014-12-01
We consider the efficiency at maximum power of a quantum Otto engine, which uses a spin or a harmonic system as its working substance and works between two heat reservoirs at constant temperatures T(h) and T(c) (power based on these two different kinds of quantum systems are bounded from the upper side by the same expression η(mp)≤η(+)≡η(C)(2)/[η(C)-(1-η(C))ln(1-η(C))] with η(C)=1-T(c)/T(h) as the Carnot efficiency. This expression η(mp) possesses the same universality of the CA efficiency η(CA)=1-√(1-η(C)) at small relative temperature difference. Within the context of irreversible thermodynamics, we calculate the Onsager coefficients and show that the value of η(CA) is indeed the upper bound of EMP for an Otto engine working in the linear-response regime.
General Formula for the Efficiency of Quantum-Mechanical Analog of the Carnot Engine
Directory of Open Access Journals (Sweden)
Sumiyoshi Abe
2013-04-01
Full Text Available An analog of the Carnot engine reversibly operating within the framework of pure-state quantum mechanics is discussed. A general formula is derived for the efficiency of such an engine with an arbitrary confining potential. Its expression is given in terms of an energy spectrum and shows how the efficiency depends on a potential as the analog of a working material in thermodynamics, in general. This non-universal nature results from the fact that there exists no analog of the second law of thermodynamics in pure-state quantum mechanics where the von Neumann entropy identically vanishes. A special class of spectra, which leads to a common form of the efficiency, is identified.
Efficient near-infrared quantum cutting in NaYF4: Ho3+, Yb3+ for solar photovoltaics.
Deng, Kaimo; Gong, Tao; Hu, Lingxun; Wei, Xiantao; Chen, Yonghu; Yin, Min
2011-01-31
Quantum cutting converting a ultraviolet photon into two near-infrared photons has been demonstrated by spectroscopic measurements in NaYF4:Ho3+,Yb3+ synthesized by hydrothermal method. Evidence is provided to confirm the occurrence of quantum cutting. Upon excitation of Ho3+ 5G4 level, near-infrared quantum cutting could occur through a two-step resonance energy transfer from Ho3+ to Yb3+ by cross relaxation, with a maximum quantum efficiency of 155.2%. This result reveals the possibility of violet to near-infrared quantum cutting with a quantum efficiency larger than 100% in Ho3+/Yb3+ codoped fluorides, suggesting the possible application in modifying the solar spectrum to enhance the efficiency of silicon solar cells.
Energy Technology Data Exchange (ETDEWEB)
Nair, Vineet; Perkins, Craig L.; Lin, Qiyin; Law, Matt
2016-04-01
We have developed a simple spin coating method to make high-quality nanoporous photoelectrodes of monoclinic BiVO4 and studied the ability of these electrodes to transport photogenerated carriers to oxidize sulfite and water. Samples containing molybdenum and featuring [001] out-of-plane crystallographic texture show a photocurrent and external quantum efficiency (EQE) for sulfite oxidation as high as 3.1 mA cm-2 and 60%, respectively, at 1.23 V versus reversible hydrogen electrode. By using an optical model of the electrode stack to accurately determine the fraction of electrode absorptance due to the BiVO4 active layer, we estimate that on average 70 +/- 5% of all photogenerated carriers escape recombination. A comparison of internal quantum efficiency as a function of film processing, illumination direction, and film thickness shows that electron transport is efficient and hole transport limits the photocurrent (hole diffusion length <40 nm). We find that Mo addition primarily improves electron transport and texturing mostly improves hole transport. Mo enhances electron transport by thinning the surface depletion layer or passivating traps and recombination centers at grain boundaries and interfaces, while improved hole transport in textured films may result from more efficient lateral hole extraction due to the texturing itself or the reduced density of deep gap states observed in photoemission measurements. Photoemission data also reveal that the films have bismuth-rich, vanadium- and oxygen-deficient surface layers, while ion scattering spectroscopy indicates a Bi-V-O surface termination. Without added catalysts, the plain BiVO4 electrodes oxidized water with an initial photocurrent and peak EQE of 1.7 mA cm-2 and 30%, respectively, which equates to a hole transfer efficiency to water of >64% at 1.23 V. The electrodes quickly photocorrode during water oxidation but show good stability during sulfite oxidation and indefinite stability in the dark. By improving
Yao, Wen-ting; Chen, Xiao-bo; Cheng, Huan-li; Zhou, Gu; Deng, Zhi-wei; Li, Yong-liang; Yan, Da-dong; Peng, Fang-lin
2015-02-01
The authors present a solar cell model with a three photons quantum-cutting system on the rear surface, then the method of calculation of limiting efficiencies was used to get the maximum efficiency 58.58% at the band gap Eg=0.9315 eV, and in contrast with two-photons quantum-cutting system, it is greatly improved. The result can prove that the three-photons quantum-cutting has a great sense to improve the efficiencies of solar cells. It is the exciting development for us to find out the useful luminescence materials to get the high efficiency.
Highly efficient photonic nanowire single-photon sources for quantum information applications
DEFF Research Database (Denmark)
Gregersen, Niels; Claudon, J.; Munsch, M.
2013-01-01
must feature near-unity efficiency, where the efficiency is defined as the number of detected photons per trigger, the probability g(2)(τ=0) of multi-photon emission events should be 0 and the emitted photons are required to be indistinguishable. An optically or electrically triggered quantum light...... factor, meaning that efficient coupling from the QD to the guided mode is obtained over a broad spectral range of ~ 50-100 nm. [4] This means that spectral alignment between the emitter line and a narrow cavity line is not required, which represents a huge practical advantage in the fabrication...
Fong, C. F.; Ota, Y.; Harbord, E.; Iwamoto, S.; Arakawa, Y.
2016-03-01
Repeated injection of spin-polarized carriers in a quantum dot (QD) leads to the polarization of nuclear spins, a process known as dynamic nuclear spin polarization (DNP). Here, we report the observation of p-shell carrier assisted DNP in single QDs at zero external magnetic field. The nuclear field—measured by using the Overhauser shift of the singly charged exciton state of the QDs—continues to increase, even after the carrier population in the s-shell saturates. This is also accompanied by an abrupt increase in nuclear spin buildup time as p-shell emission overtakes that of the s shell. We attribute the observation to p-shell electrons strongly altering the nuclear spin dynamics in the QD, supported by numerical simulation results based on a rate equation model of coupling between electron and nuclear spin system. Dynamic nuclear spin polarization with p-shell carriers could open up avenues for further control to increase the degree of nuclear spin polarization in QDs.
Energy Technology Data Exchange (ETDEWEB)
Brumfield, Brian E.; Taubman, Matthew S.; Phillips, Mark C.
2016-05-23
A rapidly-swept external-cavity quantum cascade laser with an open-path Herriott cell is used to quantify gas-phase chemical mixtures of D2O and HDO at an update rate of 40 Hz (25 ms measurement time). The chemical mixtures were generated by evaporating D2O liquid near the open-path Herriott cell, allowing the H/D exchange reaction with ambient H2O to produce HDO. Fluctuations in the ratio of D2O and HDO on timescales of < 1 s due to the combined effects of plume transport and the H/D exchange chemical reaction are observed. Noise equivalent concentrations (1σ) (NEC) of 147.0 ppbv and 151.6 ppbv in a 25 ms measurement time are estimated for D2O and HDO respectively with a 127 m optical path. These NECs are reduced to 23.0 and 24.0 ppbv with a 1 s averaging time for D2O and HDO respectively. NECs < 200 ppbv are also estimated for N2O, F134A, CH4, Acetone, and SO2 for a 25 ms measurement time. Based on the NECs obtained for D2O and HDO, the isotopic precision for measurement of the [D2O]/[HDO] concentration ratio was studied. An isotopic precision of 33‰ and 5‰ was calculated for the current experimental conditions for measurement times of 25 ms and 1 s, respectively.
Efficient Approximation of the Dynamics of One-Dimensional Quantum Spin Systems
Osborne, Tobias J.
2006-10-01
In this Letter we show that an arbitrarily good approximation to the propagator eitH for a 1D lattice of n quantum spins with Hamiltonian H may be obtained with polynomial computational resources in n and the error γ and exponential resources in |t|. Our proof makes use of the finitely correlated state or matrix product state formalism exploited by numerical renormalization group algorithms like the density matrix renormalization group. There are two immediate consequences of this result. The first is that Vidal’s time-dependent density matrix renormalization group will require only polynomial resources to simulate 1D quantum spin systems for logarithmic |t|. The second consequence is that continuous-time 1D quantum circuits with logarithmic |t| can be simulated efficiently on a classical computer, despite the fact that, after discretization, such circuits are of polynomial depth.
An efficient matrix product operator representation of the quantum chemical Hamiltonian
Energy Technology Data Exchange (ETDEWEB)
Keller, Sebastian, E-mail: sebastian.keller@phys.chem.ethz.ch; Reiher, Markus, E-mail: markus.reiher@phys.chem.ethz.ch [ETH Zürich, Laboratory of Physical Chemistry, Vladimir-Prelog-Weg 2, 8093 Zürich (Switzerland); Dolfi, Michele, E-mail: dolfim@phys.ethz.ch; Troyer, Matthias, E-mail: troyer@phys.ethz.ch [ETH Zürich, Institute of Theoretical Physics, Wolfgang-Pauli-Strasse 27, 8093 Zürich (Switzerland)
2015-12-28
We describe how to efficiently construct the quantum chemical Hamiltonian operator in matrix product form. We present its implementation as a density matrix renormalization group (DMRG) algorithm for quantum chemical applications. Existing implementations of DMRG for quantum chemistry are based on the traditional formulation of the method, which was developed from the point of view of Hilbert space decimation and attained higher performance compared to straightforward implementations of matrix product based DMRG. The latter variationally optimizes a class of ansatz states known as matrix product states, where operators are correspondingly represented as matrix product operators (MPOs). The MPO construction scheme presented here eliminates the previous performance disadvantages while retaining the additional flexibility provided by a matrix product approach, for example, the specification of expectation values becomes an input parameter. In this way, MPOs for different symmetries — abelian and non-abelian — and different relativistic and non-relativistic models may be solved by an otherwise unmodified program.
High Efficient Quantum Key Distribution by Random Using Classified Signal Coherent States
Institute of Scientific and Technical Information of China (English)
XI Jing-Bo; FANG Xi-Ming
2006-01-01
The decoy-state method is a useful method in resisting the attacks on quantum key distribution. However, how to choose the intensities of decoy states and the ratio of the decoy states and the signal state is still an open question. We present a simple formula to analyse the problem. We also give a simple method to derive the bounds of the necessary counting rates and quantum bit error rates for BB84 and SARG04; the latter was previously proposed by Scarani et al. [Phys. Rev. Lett. 92 (2004) 057901] We then propose a multi-signal-state method which employs different coherent states either as the decoy state or as the signal state to carry out quantum key distribution. We find our protocol more efficient and feasible.
Limits to solar power conversion efficiency with applications to quantum and thermal systems
Byvik, C. E.; Buoncristiani, A. M.; Smith, B. T.
1983-01-01
An analytical framework is presented that permits examination of the limit to the efficiency of various solar power conversion devices. Thermodynamic limits to solar power efficiency are determined for both quantum and thermal systems, and the results are applied to a variety of devices currently considered for use in space systems. The power conversion efficiency for single-threshold energy quantum systems receiving unconcentrated air mass zero solar radiation is limited to 31 percent. This limit applies to photovoltaic cells directly converting solar radiation, or indirectly, as in the case of a thermophotovoltaic system. Photoelectrochemical cells rely on an additional chemical reaction at the semiconductor-electrolyte interface, which introduces additional second-law demands and a reduction of the solar conversion efficiency. Photochemical systems exhibit even lower possible efficiencies because of their relatively narrow absorption bands. Solar-powered thermal engines in contact with an ambient reservoir at 300 K and operating at maximum power have a peak conversion efficiency of 64 percent, and this occurs for a thermal reservoir at a temperature of 2900 K. The power conversion efficiency of a solar-powered liquid metal magnetohydrodydnamic generator, a solar-powered steam turbine electric generator, and an alkali metal thermoelectric converter is discussed.
Green synthesis of highly efficient CdSe quantum dots for quantum-dots-sensitized solar cells
Energy Technology Data Exchange (ETDEWEB)
Gao, Bing; Shen, Chao; Zhang, Mengya; Yuan, Shuanglong; Yang, Yunxia, E-mail: yangyunxia@ecust.edu.cn, E-mail: grchen@ecust.edu.cn; Chen, Guorong, E-mail: yangyunxia@ecust.edu.cn, E-mail: grchen@ecust.edu.cn [Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237 (China); Zhang, Bo [Department of Physics, East China University of Science and Technology, Shanghai 200237 (China)
2014-05-21
Green synthesis of CdSe quantum dots for application in the quantum-dots-sensitized solar cells (QDSCs) is investigated in this work. The CdSe QDs were prepared with glycerol as the solvent, with sharp emission peak, full width at half maximum around 30 nm, and absorption peak from 475 nm to 510 nm. The reaction is environmental friendly and energy saving. What's more, the green synthesized CdSe QDs are coherence to the maximum remittance region of the solar spectrum and suitable as sensitizers to assemble onto TiO{sub 2} electrodes for cell devices application. What's more, the dynamic procedure of the carriers' excitation, transportation, and recombination in the QDSCs are discussed. Because the recombination of the electrons from the conduction band of TiO{sub 2}'s to the electrolyte affects the efficiency of the solar cells greatly, 3-Mercaptopropionic acid capped water-dispersible QDs were used to cover the surface of TiO{sub 2}. The resulting green synthesized CdSe QDSCs with Cu{sub 2}S as the electrode show a photovoltaic performance with a conversion efficiency of 3.39%.
Effect of external tensile stress on blue InGaN/GaN multi-quantum-well light-emitting diodes
Energy Technology Data Exchange (ETDEWEB)
Tawfik, Wael Z. [Interdisciplinary Program of Photonic Engineering, Chonnam National University, Yongbong 300, Gwangju 500-757 (Korea, Republic of); Department of Physics, Faculty of Science, Beni-Suef University, Beni-Suef 62511 (Egypt); Song, Juhui; Lee, Jung Ju; Ha, Jun Seok; Ryu, Sang-Wan [Interdisciplinary Program of Photonic Engineering, Chonnam National University, Yongbong 300, Gwangju 500-757 (Korea, Republic of); Choi, Hee Seok [Interdisciplinary Program of Photonic Engineering, Chonnam National University, Yongbong 300, Gwangju 500-757 (Korea, Republic of); LG Innotek Co., Ltd., 413-901 Paju (Korea, Republic of); Ryu, Bengso [Interdisciplinary Program of Photonic Engineering, Chonnam National University, Yongbong 300, Gwangju 500-757 (Korea, Republic of); Lee, June Key, E-mail: junekey@chonnam.ac.kr [Interdisciplinary Program of Photonic Engineering, Chonnam National University, Yongbong 300, Gwangju 500-757 (Korea, Republic of)
2013-10-15
The influence of external tensile stress on blue InGaN/GaN multi-quantum-well (MQW) light-emitting diodes (LEDs) is demonstrated. It was found that applying external tensile stress effectively compensates for the compressive strain developed in the InGaN active layer, thus reducing the quantum-confined Stark effect by attenuating the piezoelectric polarization from the InGaN layer. With 35 A/cm{sup 2} of current density (∼50 mA), the light output power could be improved by ∼40% when the LEDs were subjected to an external tensile stress. The blueshift in electroluminescence (EL) spectra was reduced by applying the external tensile stress. In contrast, when the LEDs were exposed to external compressive stress, the light output power intensity was decreased by ∼12% at a current density of 35 A/cm{sup 2}. The simulation results confirm that the relaxation of compressive strain in the InGaN/GaN MQW structure results in the reduction of the piezoelectric field and improves the overlap of electron and hole wave functions.
Groot, J.C.J.; Rossing, W.A.H.; Lantinga, E.A.
2006-01-01
The implementation of the statutory Mineral Accounting System (MINAS) in the Netherlands in the period 1998¿2003 required large reductions in nutrient inputs of dairy farms. Patterns in farm management adjustments throughout 6 years and their effectiveness in terms of nitrogen use efficiency (NUE) a
Wang, Peng; Lei, Jianping; Su, Mengqi; Liu, Yueting; Hao, Qing; Ju, Huangxian
2013-09-17
This work presented a photocurrent response mechanism of quantum dots (QDs) under illumination with the concept of a quantum photoelectric effect. Upon irradiation, the photoelectron could directly escape from QDs. By using nitro blue tetrazolium (NBT) to capture the photoelectron, a new visual system was proposed due to the formation of an insoluble reduction product, purple formazan, which could be used to visualize the quantum photoelectric effect. The interaction of copper(II) with QDs could form trapping sites to interfere with the quantum confinement and thus blocked the escape of photoelectron, leading to a "signal off" visual method for sensitive copper(II) detection. Meanwhile, by using QDs as a signal tag to label antibody, a "signal on" visual method was also proposed for immunoassay of corresponding protein. With meso-2,3-dimercaptosuccinic-capped CdTe QDs and carcino-embryonic antigen as models, the proposed visual detection methods showed high sensitivity, low detection limit, and wide detectable concentration ranges. The visualization of quantum photoelectric effect could be simply extended for the detection of other targets. This work opens a new visual detection way and provides a highly efficient tool for bioanalysis.
Efficiency studies on semipolar GaInN-GaN quantum well structures
Energy Technology Data Exchange (ETDEWEB)
Scholz, Ferdinand; Meisch, Tobias; Elkhouly, Karim [Institute of Optoelectronics, Ulm University (Germany)
2016-12-15
In order to clarify the reasons for the fairly poor electroluminescence (EL) performance of semipolar LED structures grown on patterned sapphire wafers, we have analyzed both, pure photoluminescence (PL) test structures without doping only containing 5 GaInN quantum wells and full EL test structures, all emitting at a wavelength of about 510 nm. Evaluating the PL intensity over a wide range of temperatures and excitation powers, we conclude that such quantum wells possess a fairly large internal quantum efficiency of about 20%. However, on EL test structures containing nominally the same quantum wells, we obtained an optical output power of only about 150μW at an applied current of 20 mA. This may be due partly to some thermal destruction of the quantum wells by the overgrowth with p-GaN. Even more important seems to be the not yet finally optimized p-doping of these structures. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)
Energy Technology Data Exchange (ETDEWEB)
Van Le, Quyet; Beom Kim, Jong; Kim, Soo Young; Lee, Byeongdu; Lee, Dong Ryeol
2017-08-16
We have investigated the effect of reaction temperature of hot-injection method on the structural properties of CsPbX3 (X: Br, I, Cl) perovskite nanocrystals (NCs) using the small- and wide-angle X-ray scattering. It is confirmed that the size of the NCs decreased as the reaction temperature decreased, resulting stronger quantum confinement. The cubic-phase perovskite NCs were formed despite the reaction temperatures increased from 140 to 180 °C. However, monodispersive NC cubes which are required for densely packing self-assembly film were only formed at lower temperatures. From the X-ray scattering measurements, the spin-coated film from more monodispersive perovskite nanocubes synthesized at lower temperatures resulted in more preferred orientation. This dense-packing perovskite film with preferred orientation yielded efficient light-emitting diode (LED) performance. Thus, the dense-packing structure of NC assemblies formed after spin-coating should be considered for high-efficient LEDs based on perovskite quantum dots in addition to quantum confinement effect of the quantum dots.
Energy Technology Data Exchange (ETDEWEB)
Kohandani, R; Kaatuzian, H [Photonics Research Laboratory, Electrical Engineering Department, AmirKabir University of Technology, Hafez Ave., Tehran (Iran, Islamic Republic of)
2015-01-31
We report a theoretical study of optical properties of AlGaAs/GaAs multiple quantum-well (MQW), slow-light devices based on excitonic population oscillations under applied external magnetic and electric fields using an analytical model for complex dielectric constant of Wannier excitons in fractional dimension. The results are shown for quantum wells (QWs) of different width. The significant characteristics of the exciton in QWs such as exciton energy and exciton oscillator strength (EOS) can be varied by application of external magnetic and electric fields. It is found that a higher bandwidth and an appropriate slow-down factor (SDF) can be achieved by changing the QW width during the fabrication process and by applying magnetic and electric fields during device functioning, respectively. It is shown that a SDF of 10{sup 5} is obtained at best. (slowing of light)
An efficient two-step quantum key distribution protocol with orthogonal product states
Institute of Scientific and Technical Information of China (English)
Yang Yu-Guang; Wen Qiao-Yan; Zhu Fu-Chen
2007-01-01
An efficient two-step quantum key distribution (QKD) protocol with orthogonal product states in the n( )n(n ≥ 3) Hilbert space is presented. In this protocol, the particles in the orthogonal product states form two particle sequences.The sender, Alice, first sends one sequence to the receiver, Bob. After Bob receives the first particle sequence, Alice and Bob check eavesdropping by measuring a fraction of particles randomly chosen. After ensuring the security of the quantum channel, Alice sends the other particle sequence to Bob. By making an orthogonal measurement on the two particle sequences, Bob can obtain the information of the orthogonal product states sent by Alice. This protocol has many distinct features such as great capacity, high efficiency in that it uses all orthogonal product states in distributing the key except those chosen for checking eavesdroppers.
A novel method to increase quantum efficiency of the monolithically integrated PIN/HBT-receiver
Cui, Hailin; Zhou, Shouli; Huang, Hui; Huang, Yongqing; Ren, Xiaomin
2005-11-01
Adding resonant cavity to increase quantum efficiency of the monolithically integrated PIN/HBT-Receiver is described. Between the InP buffer and device epitaxial structure, InP/InGaAsP quarter wavelength stack (QWS) are used to form DBR (Distributed Bragg Reflectors) mirror. The PIN-PD is integrated within a Fabry-Perot cavity and the incident light is reflected many times by the Fabry-Perot cavity and consequently absorbed many times by the absorption layer. Therefore, the quantum efficiency of this detector is enlarged, meanwhile other performances such as frequency response are not influenced. We discuss the method to fabricate the resonance cavity, make theory simulation, optimize design on it, and analyze the advantage of this device.
General and Efficient C-C Bond Forming Photoredox Catalysis with Semiconductor Quantum Dots.
Caputo, Jill A; Frenette, Leah C; Zhao, Norman; Sowers, Kelly L; Krauss, Todd D; Weix, Daniel J
2017-03-29
Photoredox catalysis has become an essential tool in organic synthesis because it enables new routes to important molecules. However, the best available molecular catalysts suffer from high catalyst loadings and rely on precious metals. Here we show that colloidal nanocrystal quantum dots (QDs) can serve as efficient and robust, precious-metal free, photoassisted redox catalysts. A single-sized CdSe quantum dot (3.0 ± 0.2 nm) can replace several different dye catalysts needed for five different photoredox reactions (β-alkylation, β-aminoalkylation, dehalogenation, amine arylation, and decarboxylative radical formation). Even without optimization of the QDs or the reaction conditions, efficiencies rivaling those of the best available metal dyes were obtained.
Quantum efficiency of the CCD camera (XIS) for the ASTRO-E mission
Katayama, H; Kohmura, T; Katayama, K; Yoshita, K; Tsunemi, H; Kitamoto, S; Hayashida, K; Miyata, E; Hashimotodani, K; Koyama, K; Ricker, G; Bautz, M W; Foster, R; Kissel, S
1999-01-01
We measured the optical and the X-ray transmission of the optical blocking filters for the X-ray Imaging Spectrometers (XISs) which are the X-ray CCD cameras of the ASTRO-E satellite. We conclude that the oxidation of the aluminum reduces the optical transmission down to approx 60-70% of the theoretical value of the aluminum. We achieved optical transmission below 5x10 sup - sup 5 in the range from 4000 to 9500 A by using aluminum thickness of 1200 A, while the theoretical calculation requires 800 A. The measurement of absolute quantum efficiency of XIS is also performed at several particular energies. We confirmed 20% quantum efficiency at 0.5 keV for the XIS engineering model (XIS EM).
Simulation of the detective quantum efficiency for a hybrid pixel detector
Energy Technology Data Exchange (ETDEWEB)
Risco Norrlid, L. del [Department of Radiation Sciences, Uppsala University, Box 535, 751 21 Uppsala (Sweden)]. E-mail: lilian@tsl.uu.se; Edling, Fredrik [Department of Radiation Sciences, Uppsala University, Box 535, 751 21 Uppsala (Sweden); Fransson, K. [The Svedberg Laboratory, Uppsala University, Box 533, 751 21 Uppsala (Sweden); Brenner, R. [Department of Radiation Sciences, Uppsala University, Box 535, 751 21 Uppsala (Sweden); Bingefors, N. [Department of Radiation Sciences, Uppsala University, Box 535, 751 21 Uppsala (Sweden); Gustafsson, L. [Department of Radiation Sciences, Uppsala University, Box 535, 751 21 Uppsala (Sweden); Roennqvist, C. [Scanditronix Wellhoefer AB, Stalgatan 14, 754 50 Uppsala (Sweden)
2005-05-11
A simulation tool has been developed for the analysis of the performance of an X-ray imaging hybrid pixel detector. The photon transport and charge collection were simulated with the aid of the Monte Carlo based code GEANT and the readout signal processing was simulated in a program written in the LabView programming environment. Results of the spatial frequency-dependent detective quantum efficiency are presented and the influence of charge sharing, the threshold settings, level of exposure, the noise sources on the detector performance are studied. The detector was found to operate quantum limited down to an exposure of 0.08 {mu}Gy, below which it is limited by the readout noise. The threshold setting has a strong influence on both the efficiency and the spatial resolution due to charge sharing, and a compromise between the two is necessary. The optimized threshold value corresponds to half of the mean energy of the input spectrum.
Enhanced quantum efficiency for CsI grown on a graphite-based substrate coating
Friese, J; Homolka, J; Kastenmüller, A; Maier-Komor, P; Peter, M; Zeitelhack, K; Kienle, P; Körner, H J
1999-01-01
Quantum efficiencies (QE) in the vacuum ultraviolet (VUV) wavelength region have been measured for solid CsI layers on various substrates. The CsI films were deposited applying electron beam evaporation. The QE measurements were performed utilizing synchrotron radiation as well as light from a deuterium lamp. A GaAsP diode with a sensitivity calibration traceable to a primary radiation standard was used for normalization. For CsI layers grown on resin-stabilized graphite films a significant enhancement of QE was observed. Substrates suitable for gas detector applications and aging properties were investigated. The procedures to prepare and reproduce high quantum efficient CsI layers are described.
Clawson, Savannah Ellen
2017-01-01
The quantum efficiency of a Burle 8850 photomultiplier tube with a potassium-caesium-antimony (bialkali) photocathode was determined by attenuating a 1 mW HeNe laser emitting at 633 nm and measuring the signal frequency when the laser was incident on the photomultiplier. A temperature range of 5 $^{\\circ}$C $-$ 20 $^{\\circ}$C was investigated and it was found that the quantum efficiency decreases with temperature, with the signal frequency decreasing at a faster rate than the dark current frequency. Therefore, it was concluded that it would not be beneficial to cool photomultiplier tubes operating in the visible spectrum for use in collinear laser spectroscopy due to a decreasing signal-to-noise ratio. The signal pulse height distribution was also analysed and found to be independent of temperature within the range investigated.
Tscherbul, T V; Dalgarno, A
2010-11-14
An efficient method is presented for rigorous quantum calculations of atom-molecule and molecule-molecule collisions in a magnetic field. The method is based on the expansion of the wave function of the collision complex in basis functions with well-defined total angular momentum in the body-fixed coordinate frame. We outline the general theory of the method for collisions of diatomic molecules in the (2)Σ and (3)Σ electronic states with structureless atoms and with unlike (2)Σ and (3)Σ molecules. The cross sections for elastic scattering and Zeeman relaxation in low-temperature collisions of CaH((2)Σ(+)) and NH((3)Σ(-)) molecules with (3)He atoms converge quickly with respect to the number of total angular momentum states included in the basis set, leading to a dramatic (>10-fold) enhancement in computational efficiency compared to the previously used methods [A. Volpi and J. L. Bohn, Phys. Rev. A 65, 052712 (2002); R. V. Krems and A. Dalgarno, J. Chem. Phys. 120, 2296 (2004)]. Our approach is thus well suited for theoretical studies of strongly anisotropic molecular collisions in the presence of external electromagnetic fields.
Enhanced quantum efficiency of photoelectron emission, through surface textured metal electrodes
Energy Technology Data Exchange (ETDEWEB)
Alexander, Anna; Bandaru, Prabhakar R., E-mail: pbandaru@ucsd.edu [Program in Materials Science, Department of Mechanical Engineering, University of California, San Diego, La Jolla, California, 92130 (United States); Moody, Nathan A. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)
2016-03-15
It is predicted that the quantum efficiency (QE) of photoelectron emission from metals may be enhanced, possibly by an order of magnitude, through optimized surface texture. Through extensive computational simulations, it is shown that the absorption enhancement in select surface groove geometries may be a dominant contributor to enhanced QE and corresponds to localized Fabry–Perot resonances. The inadequacy of extant analytical models in predicting the QE increase, and suggestions for further improvement, are discussed.
Efficient parabolic evaluation of coupling terms in hybrid quantum/classical simulations
Energy Technology Data Exchange (ETDEWEB)
Bastida, Adolfo, E-mail: bastida@um.es [Departamento de Quimica Fisica, Facultad de Quimica, Universidad de Murcia, 30100 Murcia (Spain); Soler, Miguel Angel; Zuniga, Jose; Requena, Alberto [Departamento de Quimica Fisica, Facultad de Quimica, Universidad de Murcia, 30100 Murcia (Spain); Miguel, Beatriz [Departamento de Ingenieria Quimica y Ambiental, Universidad Politecnica de Cartagena, 30203 Cartagena (Spain)
2009-03-30
A parabolic interpolation function of time is proposed to evaluate the non-adiabatic coupling matrix elements and the adiabatic energies at intermediate times within the classical time integration interval in hybrid quantum/classical simulations. The accuracy and the computational efficiency of this parabolic approximation are illustrated by carrying out a numerical application to the well-studied vibrational relaxation of I{sub 2} in liquid xenon.
Qu, Yuanyuan; Li, Feng; Zhou, Hongcai; Zhao, Mingwen
2016-01-01
Light isotopes separation, such as 3He/4He, H2/D2, H2/T2, etc., is crucial for various advanced technologies including isotope labeling, nuclear weapons, cryogenics and power generation. However, their nearly identical chemical properties made the separation challenging. The low productivity of the present isotopes separation approaches hinders the relevant applications. An efficient membrane with high performance for isotopes separation is quite appealing. Based on first-principles calculations, we theoretically demonstrated that highly efficient light isotopes separation, such as 3He/4He, can be reached in a porous graphene-like carbon nitride material via quantum sieving effect. Under moderate tensile strain, the quantum sieving of the carbon nitride membrane can be effectively tuned in a continuous way, leading to a temperature window with high 3He/4He selectivity and permeance acceptable for efficient isotopes harvest in industrial application. This mechanism also holds for separation of other light isotopes, such as H2/D2, H2/T2. Such tunable quantum sieving opens a promising avenue for light isotopes separation for industrial application. PMID:26813491
Energy Technology Data Exchange (ETDEWEB)
Ollis, D.F. [North Carolina State Univ., Raleigh, NC (United States)
1996-09-01
In the remediation industries, a useful treatment technology must be {open_quotes}general, robust, and cheap{close_quotes}. Among oxidation processes, heterogeneous photocatalysis is now broadly demonstrated to destroy common water and air contaminants. The potential process uses of highly stable titania, long lived lamps (one year), and room temperature operation, indicating a simple and robust process. We are left to address the third criterion: Can photocatalysis be {open_quotes}cheap{close_quotes}? In both liquid phase and gas phase treatment and purification by photocatalysis, it is established that the primary barrier to commercialization is often cost. Cost in return is dominated by the efficiency with which solar or lamp photons are harvested for productive light, and subsequent dark, reactions. This paper therefore defines fundamental needs in photocatalysis for pollution control in terms of activities which could lead to quantum efficiency enhancement. We first recall three related definitions. The quantum yield (QY) is the ratio of molecules of reactant converted per photon absorbed, a fundamental quantity. A less fundamental, but more easily measured variable is the quantum efficiency (QE), the ratio of molecules converted per photon entering the reactor. A third variable is the energy required per order of magnitude pollutant reduction, or EEO, a definition which provides for easy energy cost comparisons among different technologies. Each measure cited here reflects the photon, and thus the electrical, cost of this photochemistry.
Efficient photon extraction from a quantum dot in a broad-band planar cavity antenna
Energy Technology Data Exchange (ETDEWEB)
Ma, Yong, E-mail: y.ma@hw.ac.uk; Kremer, Peter E.; Gerardot, Brian D., E-mail: B.D.Gerardot@hw.ac.uk [Institute of Photonics and Quantum Sciences, SUPA, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom)
2014-01-14
We analyse the extraction of photons emitted from single InAs quantum dots embedded in planar microcavities. The structures are designed to achieve broad-band operation and high-collection efficiency from a device requiring straightforward fabrication, even with electrical contacts. The designs consist of a quantum dot in a GaAs membrane with asymmetric top and bottom mirrors and a top-side solid immersion lens (SIL). Four separate cases are considered in our design: a GaAs membrane only (case 1), GaAs membrane with a glass SIL on top (case 2), a GaAs membrane with a glass SIL on top and a back mirror consisting of Au (case 3), a GaAs membrane with a glass SIL on top of a distribute Bragg reflector mirror and Au back mirror (case 4). Both finite difference time domain and analytical simulations are used to calculate the electric field, power density, and far-field radiation pattern. For optimized structures (case 4), we obtain significant extraction efficiencies (>50%) with modest Purcell enhancements (∼20%) and a large spectral full-width-half-maximum (>100 nm). The high-extraction efficiency, broad-band operation, and facile fabrication make the proposed structures promising for realistic quantum dot devices.
Quantum efficiency performances of the NIR European Large Format Array detectors tested at ESTEC
Crouzet, P.-E.; Duvet, L.; de Wit, F.; Beaufort, T.; Blommaert, S.; Butler, B.; Van Duinkerken, G.; ter Haar, J.; Heijnen, J.; van der Luijt, K.; Smit, H.
2015-10-01
Publisher's Note: This paper, originally published on 10/12/2015, was replaced with a corrected/revised version on 10/23/2015. If you downloaded the original PDF but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. The Payload Technology Validation Section (SRE-FV) at ESTEC has the goal to validate new technology for future or on-going mission. In this framework, a test set up to characterize the quantum efficiency of near-infrared (NIR) detectors has been created. In the context of the NIR European Large Format Array ("LFA"), 3 deliverables detectors coming from SELEX-UK/ATC (UK) on one side, and CEA/LETI- CEA/IRFU-SOFRADIR (FR) on the other side were characterized. The quantum efficiency of an HAWAII-2RG detector from Teledyne was as well measured. The capability to compare on the same setup detectors from different manufacturers is a unique asset for the future mission preparation office. This publication will present the quantum efficiency results of a HAWAII-2RG detector from Teledyne with a 2.5um cut off compared to the LFA European detectors prototypes developed independently by SELEX-UK/ATC (UK) on one side, and CEA/LETI- CEA/IRFU-SOFRADIR (FR) on the other side.
A novel high-efficiency single-mode quantum dot single photon source
DEFF Research Database (Denmark)
Gerard, J.M.; Gregersen, Niels; Nielsen, Torben Roland
2008-01-01
We present a novel single-mode single photon source exploiting the emission of a semiconductor quantum dot (QD) located inside a photonic wire. Besides an excellent coupling (>95%) of QD spontaneous emission to the fundamental guided mode [1], we show that a single photon collection efficiency...... above 80% within a 0.5 numerical aperture can be achieved using a bottom Bragg mirror and a tapering of the nanowire tip. Because this photon collection strategy does not exploit the Purcell effect, it could also be efficiently applied to broadband single photon emitters such as F-centers in diamond....
Brennan, Thomas P.
2013-01-01
Atomic layer deposition (ALD) was used to grow both PbS quantum dots and Al2O3 barrier layers in a solid-state quantum dot-sensitized solar cell (QDSSC). Barrier layers grown prior to quantum dots resulted in a near-doubling of device efficiency (0.30% to 0.57%) whereas barrier layers grown after quantum dots did not improve efficiency, indicating the importance of quantum dots in recombination processes. © 2013 The Royal Society of Chemistry.
Wu, Feng
2017-05-03
Significant internal quantum efficiency (IQE) enhancement of GaN/AlGaN multiple quantum wells (MQWs) emitting at similar to 350 nm was achieved via a step quantum well (QW) structure design. The MQW structures were grown on AlGaN/AlN/sapphire templates by metal-organic chemical vapor deposition (MOCVD). High resolution x-ray diffraction (HR-XRD) and scanning transmission electron microscopy (STEM) were performed, showing sharp interface of the MQWs. Weak beam dark field imaging was conducted, indicating a similar dislocation density of the investigated MQWs samples. The IQE of GaN/AlGaN MQWs was estimated by temperature dependent photoluminescence (TDPL). An IQE enhancement of about two times was observed for the GaN/AlGaN step QW structure, compared with conventional QW structure. Based on the theoretical calculation, this IQE enhancement was attributed to the suppressed polarization-induced field, and thus the improved electron-hole wave-function overlap in the step QW.
Wu, Feng; Sun, Haiding; AJia, Idris A.; Roqan, Iman S.; Zhang, Daliang; Dai, Jiangnan; Chen, Changqing; Feng, Zhe Chuan; Li, Xiaohang
2017-06-01
Significant internal quantum efficiency (IQE) enhancement of GaN/AlGaN multiple quantum wells (MQWs) emitting at ~350 nm was achieved via a step quantum well (QW) structure design. The MQW structures were grown on AlGaN/AlN/sapphire templates by metal-organic chemical vapor deposition (MOCVD). High resolution x-ray diffraction (HR-XRD) and scanning transmission electron microscopy (STEM) were performed, showing sharp interface of the MQWs. Weak beam dark field imaging was conducted, indicating a similar dislocation density of the investigated MQWs samples. The IQE of GaN/AlGaN MQWs was estimated by temperature dependent photoluminescence (TDPL). An IQE enhancement of about two times was observed for the GaN/AlGaN step QW structure, compared with conventional QW structure. Based on the theoretical calculation, this IQE enhancement was attributed to the suppressed polarization-induced field, and thus the improved electron-hole wave-function overlap in the step QW.
High Quantum Efficiency AlGaN/InGaN Photodetectors
Energy Technology Data Exchange (ETDEWEB)
Buckley, James H; Leopold, Daniel
2009-11-24
High efficiency photon counting detectors in use today for high energy particle detection applications have a significant spectral mismatch with typical sources and have a number of practical problems compared with conventional bialkali photomultiplier tubes. Numerous high energy physics experiments that employ scintillation light detectors or Cherenkov detectors would benefit greatly from photomultipliers with higher quantum efficiencies. The need for extending the sensitivity of photon detectors to the blue and UV wavebands comes from the fact that both Cherenkov light and some scintillators have an emission spectrum which is peaked at short wavelengths. This research involves the development of high quantum efficiency, high gain, UV/blue photon counting detectors based on AlGaN/InGaN photocathode heterostructures grown by molecular beam epitaxy (MBE). The work could eventually lead to nearly ideal light detectors with a number of distinct advantages over existing technologies for numerous applications in high-energy physics and particle astrophysics. Potential advantages include much lower noise detection, better stability and radiation resistance than other cathode structures, very low radioactive background levels for deep underground experiments and high detection efficiency of individual UV-visible photons. We are also working on the development of photocathodes with intrinsic gain, initially improving the detection efficiency of hybrid semiconductor-vacuum tube devices, and eventually leading to an all-solid-state photomultiplier device.
Fotakis, Dimitris
2011-01-01
We study the problem of revenue maximization in the marketing model for social networks introduced by (Hartline, Mirrokni, Sundararajan, WWW '08). We restrict our attention to the Uniform Additive Model and mostly focus on Influence-and-Exploit (IE) marketing strategies. We obtain a comprehensive collection of results on the efficiency and the approximability of IE strategies, which also imply a significant improvement on the best known approximation ratios for revenue maximization. Specifically, we show that in the Uniform Additive Model, both computing the optimal marketing strategy and computing the best IE strategy are $\\NP$-hard for undirected social networks. We observe that allowing IE strategies to offer prices smaller than the myopic price in the exploit step leads to a measurable improvement on their performance. Thus, we show that the best IE strategy approximates the maximum revenue within a factor of 0.911 for undirected and of roughly 0.553 for directed networks. Moreover, we present a natural g...
Energy Technology Data Exchange (ETDEWEB)
Pilla, Viviane, E-mail: vivianepilla@infis.ufu.br [Universidade Federal de Uberlandia (UFU), Instituto de Fisica (Brazil); Munin, Egberto [Universidade Camilo Castelo Branco (UNICASTELO), Centro de Engenharia Biomedica (Brazil)
2012-10-15
The thermo-optical parameters of cadmium selenide/zinc sulfide (CdSe/ZnS) core-shell quantum dots (QDs) suspended in aqueous solutions were measured using a Thermal Lens (TL) technique. TL transient measurements were performed using the mode-mismatched dual-beam (excitation and probe) configuration. A He-Ne laser at {lambda}{sub p} = 632.8 nm was used as the probe beam, and an Ar{sup +} laser (at {lambda}{sub e} = 514.5 nm) was used as the excitation beam to study the effect of the core sizes (2-4 nm) of CdSe/ZnS nanocrystals functionalized with amine (R-NH{sub 2}) or carboxyl (R-COOH) groups. The average values of the thermal diffusivity D = (1.48 {+-} 0.06) Multiplication-Sign 10{sup -3} cm{sup 2}/s obtained for QDs samples are in good agreement with the pure water solvent result. The fraction thermal load ({phi}) and radiative quantum efficiencies ({eta}) of the functionalized CdSe/ZnS QDs were determined and compared with non-functionalized CdSe/ZnS QDs. The obtained {eta} values for non-functionalized CdSe/ZnS are slightly higher than those for the QDs functionalized with amine or carboxyl groups.
Efficiency at maximum power output of quantum heat engines under finite-time operation
Wang, Jianhui; He, Jizhou; Wu, Zhaoqi
2012-03-01
We study the efficiency at maximum power, ηm, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures Th and Tc, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ηm becomes identical to the Carnot efficiency ηC=1-Tc/Th. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ηm at maximum power output is bounded from above by ηC/(2-ηC) and from below by ηC/2. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ηCA=1-Tc/Th is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.
Ai, Qing; Jin, Bih-Yaw; Cheng, Yuan-Chung
2013-01-01
Elucidating quantum coherence effects and geometrical factors for efficient energy transfer in photosynthesis has the potential to uncover non-classical design principles for advanced organic materials. We study energy transfer in a linear light-harvesting model to reveal that dimerized geometries with strong electronic coherences within donor and acceptor pairs exhibit significantly improved efficiency, which is in marked contrast to predictions of the classical F\\"orster theory. We reveal that energy tuning due to coherent delocalization of photoexcitations is mainly responsible for the efficiency optimization. This coherence-assisted energy-tuning mechanism also explains the energetics and chlorophyll arrangements in the widely-studied Fenna-Matthews-Olson complex. We argue that a clustered network with rapid energy relaxation among donors and resonant energy transfer from donor to acceptor states provides a basic formula for constructing efficient light-harvesting systems, and the general principles revea...
Efficiency at maximum power output of quantum heat engines under finite-time operation.
Wang, Jianhui; He, Jizhou; Wu, Zhaoqi
2012-03-01
We study the efficiency at maximum power, η(m), of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures T(h) and T(c), respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), η(m) becomes identical to the Carnot efficiency η(C)=1-T(c)/T(h). For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency η(m) at maximum power output is bounded from above by η(C)/(2-η(C)) and from below by η(C)/2. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency η(CA)=1-√(T(c)/T(h)) is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.
Tanhaei, M. H.; Rezaei, G.
2016-10-01
In this work, effects of an on-center hydrogenic impurity, external electric and magnetic fields on the optical rectification coefficient (ORC), second and third harmonic generations (SHG and THG) of a multi-layer spherical quantum dot (MLSQD) are studied. Energy eigenvalues and eigenvectors are calculated using the direct matrix diagonalization method and optical properties are obtained using the compact density matrix approach. Our results reveal that the hydrogenic impurity and external fields have a great influence on these optical quantities. Hydrogenic impurity reduces the magnitude of the resonant peaks and shifts them to the higher energies. An increase in the magnetic (electric) field, leads to increase (decrease) the interval energies and the dipole moment matrix elements. Therefore, resonant peaks of these optical quantities find an obvious blue (red) shift and their magnitudes enhance (diminish) with increasing the external magnetic (electric) field.
Shen, Huaibin; Zheng, Ying; Wang, Hongzhe; Xu, Weiwei; Qian, Lei; Yang, Yixing; Titov, Alexandre; Hyvonen, Jake; Li, Lin Song
2013-11-29
In this paper, we present an innovative method for the synthesis of CdTe/CdSe type-II core/shell structure quantum dots (QDs) using 'greener' chemicals. The PL of CdTe/CdSe type-II core/shell structure QDs ranges from 600 to 820 nm, and the as-synthesized core/shell structures show narrow size distributions and stable and high quantum yields (50–75%). Highly efficient near-infrared light-emitting diodes (LEDs) have been demonstrated by employing the CdTe/CdSe type-II core/shell QDs as emitters. The devices fabricated based on these type-II core/shell QDs show color-saturated near-infrared emission from the QD layers, a low turn-on voltage of 1.55 V, an external quantum efficiency (EQE) of 1.59%, and a current density and maximum radiant emittance of 2.1 × 10(3) mA cm−2 and 17.7 mW cm−2 at 8 V; it is the first report to use type-II core/shell QDs as near-infrared emitters and these results may offer a practicable platform for the realization of near-infrared QD-based light-emitting diodes, night-vision-readable displays, and friend/foe identification system.
Rabbani-Haghighi, Hadi; Chenais, Sebastien; Siove, Alain
2010-01-01
We report on a solid-state laser structure being the organic counterpart of the Vertical External-Cavity Surface-Emitting Laser (VECSEL) design. The gain medium is a poly (methyl methacrylate) film doped with Rhodamine 640, spin-casted onto the High-Reflectivity mirror of a plano-concave resonator. Upon pumping by 7-ns pulses at 532 nm, a diffraction-limited beam (M^2=1) was obtained, with a conversion efficiency of 43%; higher peak powers (2kW) could be attained when resorting to shorter (0.5 ns) pump pulses. The spectrum was controlled by the thickness of the active layer playing the role of an intracavity etalon; tunability is demonstrated over up to 20 nm.
Thermodynamic limits to the efficiency of solar energy conversion by quantum devices
Buoncristiani, A. M.; Byvik, C. E.; Smith, B. T.
1981-01-01
The second law of thermodynamics imposes a strict limitation to the energy converted from direct solar radiation to useful work by a quantum device. This limitation requires that the amount of energy converted to useful work (energy in any form other than heat) can be no greater than the change in free energy of the radiation fields. Futhermore, in any real energy conversion device, not all of this available free energy in the radiation field can be converted to work because of basic limitations inherent in the device itself. A thermodynamic analysis of solar energy conversion by a completely general prototypical quantum device is presented. This device is completely described by two parameters, its operating temperature T sub R and the energy threshold of its absorption spectrum. An expression for the maximum thermodynamic efficiency of a quantum solar converter was derived in terms of these two parameters and the incident radiation spectrum. Efficiency curves for assumed solar spectral irradiance corresponding to air mass zero and air mass 1.5 are presented.
Wang, Guan-Yu; Li, Tao; Deng, Fu-Guo
2015-04-01
Quantum entanglement is the key resource in quantum information processing, especially in quantum communication network. However, affected by the environment noise, the maximally entangled states usually collapse into nonmaximally entangled ones or even mixed states. Here we present two high-efficiency schemes to complete the entanglement concentration of nonlocal two-atom systems. Our first scheme is used to concentrate the nonlocal atomic systems in the partially entangled states with known parameters, and it has the optimal success probability. The second scheme is used to concentrate the entanglement of the nonlocal two-atom systems in the partially entangled states with unknown parameters. Compared with the other schemes for the entanglement concentration of atomic systems, our two protocols are more efficient and practical. They require only an ancillary single photon to judge whether they succeed or not, and they work in a heralded way with detection inefficiency and absence of sophisticated single-photon detectors in practical applications. Moreover, they are insensitive to both the cavity decay and atomic spontaneous emission.
Lei, Fengcai; Liu, Wei; Sun, Yongfu; Xu, Jiaqi; Liu, Katong; Liang, Liang; Yao, Tao; Pan, Bicai; Wei, Shiqiang; Xie, Yi
2016-01-01
Ultrathin metal layers can be highly active carbon dioxide electroreduction catalysts, but may also be prone to oxidation. Here we construct a model of graphene confined ultrathin layers of highly reactive metals, taking the synthetic highly reactive tin quantum sheets confined in graphene as an example. The higher electrochemical active area ensures 9 times larger carbon dioxide adsorption capacity relative to bulk tin, while the highly-conductive graphene favours rate-determining electron transfer from carbon dioxide to its radical anion. The lowered tin–tin coordination numbers, revealed by X-ray absorption fine structure spectroscopy, enable tin quantum sheets confined in graphene to efficiently stabilize the carbon dioxide radical anion, verified by 0.13 volts lowered potential of hydroxyl ion adsorption compared with bulk tin. Hence, the tin quantum sheets confined in graphene show enhanced electrocatalytic activity and stability. This work may provide a promising lead for designing efficient and robust catalysts for electrolytic fuel synthesis. PMID:27585984
Image quality and detective quantum efficiency of new screens HG-M and XG-S
Energy Technology Data Exchange (ETDEWEB)
Sawada, Michito; Tsuge, Tatsuya; Oda, Koji; Kosuge, Keiko [Anjo Kosei Hospital, Aichi (Japan)
1998-04-01
Imaging characteristics of the new screens HG-M (AD system) and XG-S (EX system) were examined in terms of both image quality and x-ray utilization efficiency. For the evaluation of these screens, NEQ(u), which represents an overall evaluation of the imaging properties of the screen-film system, was measured to determine image quality, and DQE(u), which represents detective quantum efficiency, was measured to determine x-ray utilization efficiency. The conventional screen HR-8, which has similar sensitivity, was examined in the same way, and the results were compared with those of the new screens. The new screens were found to have inferior graininess but superior sharpness, NEQ(u), and DQE(u) in comparison with the HR-8 screen. These results indicate that the new screens improve both image quality and detective quantum efficiency. Therefore, the HG-M and XG-S screens, which include the new phosphor technology, can be considered new-generation screens with improved image quality performance for sensitivity. In use, these screens provided superior image quality to the conventional screen with identical exposure. (author)
Quantum efficiency of silica-coated rare-earth doped yttrium silicate
Energy Technology Data Exchange (ETDEWEB)
Cervantes-Vásquez, D., E-mail: dcervant@cnyn.unam.mx [Centro de Investigación Científica y de Educación Superior de Ensenada, Carretera Ensenada-Tijuana No. 3918, Zona Playitas, C.P. 22860 Ensenada, B.C., México (Mexico); Contreras, O.E.; Hirata, G.A. [Centro de Nanociencias y Nanotecnología, Universidad Nacional Autónoma de México, Km. 107 Carretera Tijuana-Ensenada, C.P. 22800 Ensenada, B.C., México (Mexico)
2013-11-15
The photoluminescent properties of rare earth-activated white-emitting Y{sub 2}SiO{sub 5}:Ce,Tb nanocrystalline phosphor prepared by two different methods, pressure-assisted combustion synthesis and sol–gel, were studied. The synthesized phosphor samples were post-annealed at 1373 K and 1623 K in order to obtain the X1-Y{sub 2}SiO{sub 5} and X2-Y{sub 2}SiO{sub 5} phases, respectively, which were confirmed by X-ray diffraction measurements. Photoluminescence analysis showed the contribution of two blue-emission bands within the 380–450 nm region originating from 5d–4f transitions in Ce{sup 3+} ions and a well-defined green emission of Tb{sup 3+} ions located at 545 nm corresponding to {sup 5}D{sub 4}→{sup 7}F{sub 5} electronic transitions. Thereafter, Y{sub 2}SiO{sub 5}:Ce,Tb powders were coated with colloidal silica in order to investigate the effect of silica coatings on their luminescent properties. Absolute fluorescence quantum efficiency measurements were carefully performed, which revealed an increase of 12% of efficiency in coated compared with bare-Y{sub 2}SiO{sub 5}:Ce,Tb phosphor. -- Highlights: • Y{sub 2}SiO{sub 5}:Ce,Tb phosphor powders were successfully coated with colloidal silica. • Post-annealing treatments improved the quantum efficiency of silica-coated Y{sub 2}SiO{sub 5}:Ce,Tb phosphors. • Absolute fluorescence quantum efficiency measurements showed an increase of 12%.
Smolin, John A; Gambetta, Jay M; Smith, Graeme
2012-02-17
We provide an efficient method for computing the maximum-likelihood mixed quantum state (with density matrix ρ) given a set of measurement outcomes in a complete orthonormal operator basis subject to Gaussian noise. Our method works by first changing basis yielding a candidate density matrix μ which may have nonphysical (negative) eigenvalues, and then finding the nearest physical state under the 2-norm. Our algorithm takes at worst O(d(4)) for the basis change plus O(d(3)) for finding ρ where d is the dimension of the quantum state. In the special case where the measurement basis is strings of Pauli operators, the basis change takes only O(d(3)) as well. The workhorse of the algorithm is a new linear-time method for finding the closest probability distribution (in Euclidean distance) to a set of real numbers summing to one.
Spectral-gap analysis for efficient tunneling in quantum adiabatic optimization
Brady, Lucas T.; van Dam, Wim
2016-09-01
We investigate the efficiency of quantum adiabatic optimization when overcoming potential barriers to get from a local to a global minimum. Specifically we look at n qubit systems with symmetric cost functions f :{0,1 } n→R , where the ground state must tunnel through a potential barrier of width nα and height nβ. By the quantum adiabatic theorem the time delay sufficient to ensure tunneling grows quadratically with the inverse spectral gap during this tunneling process. We analyze barrier sizes with 1 /2 ≤α +β and α folklore result by Goldstone from 2002, which used large spin and instanton methods. Parts of our result also refine recent results by Kong and Crosson [arXiv:1511.06991] and Jiang et al. [arXiv:1603.01293] about the exponential gap scaling.
Ma, Liang; Tu, Chunlai; Le, Phuong; Chitoor, Shweta; Lim, Sung Jun; Zahid, Mohammad U; Teng, Kai Wen; Ge, Pinghua; Selvin, Paul R; Smith, Andrew M
2016-03-16
Quantum dots are fluorescent nanoparticles used to detect and image proteins and nucleic acids. Compared with organic dyes and fluorescent proteins, these nanocrystals have enhanced brightness, photostability, and wavelength tunability, but their larger size limits their use. Recently, multidentate polymer coatings have yielded stable quantum dots with small hydrodynamic dimensions (≤10 nm) due to high-affinity, compact wrapping around the nanocrystal. However, this coating technology has not been widely adopted because the resulting particles are frequently heterogeneous and clustered, and conjugation to biological molecules is difficult to control. In this article we develop new polymeric ligands and optimize coating and bioconjugation methodologies for core/shell CdSe/Cd(x)Zn(1-x)S quantum dots to generate homogeneous and compact products. We demonstrate that "ligand stripping" to rapidly displace nonpolar ligands with hydroxide ions allows homogeneous assembly with multidentate polymers at high temperature. The resulting aqueous nanocrystals are 7-12 nm in hydrodynamic diameter, have quantum yields similar to those in organic solvents, and strongly resist nonspecific interactions due to short oligoethylene glycol surfaces. Compared with a host of other methods, this technique is superior for eliminating small aggregates identified through chromatographic and single-molecule analysis. We also demonstrate high-efficiency bioconjugation through azide-alkyne click chemistry and self-assembly with hexa-histidine-tagged proteins that eliminate the need for product purification. The conjugates retain specificity of the attached biomolecules and are exceptional probes for immunofluorescence and single-molecule dynamic imaging. These results are expected to enable broad utilization of compact, biofunctional quantum dots for studying crowded macromolecular environments such as the neuronal synapse and cellular cytoplasm.
A fast and efficient algorithm for Slater determinant updates in quantum Monte Carlo simulations.
Nukala, Phani K V V; Kent, P R C
2009-05-28
We present an efficient low-rank updating algorithm for updating the trial wave functions used in quantum Monte Carlo (QMC) simulations. The algorithm is based on low-rank updating of the Slater determinants. In particular, the computational complexity of the algorithm is O(kN) during the kth step compared to traditional algorithms that require O(N(2)) computations, where N is the system size. For single determinant trial wave functions the new algorithm is faster than the traditional O(N(2)) Sherman-Morrison algorithm for up to O(N) updates. For multideterminant configuration-interaction-type trial wave functions of M+1 determinants, the new algorithm is significantly more efficient, saving both O(MN(2)) work and O(MN(2)) storage. The algorithm enables more accurate and significantly more efficient QMC calculations using configuration-interaction-type wave functions.
Tsai, Meng-Lin
2015-12-16
By employing graphene quantum dots (GQDs), we have achieved a high efficiency of 16.55% in n-type Si heterojunction solar cells. The efficiency enhancement is based on the photon downconversion phenomenon of GQDs to make more photons absorbed in the depletion region for effective carrier separation, leading to the enhanced photovoltaic effect. The short circuit current and the fill factor are increased from 35.31 to 37.47 mA/cm2 and 70.29% to 72.51%, respectively. The work demonstrated here holds the promise for incorporating graphene-based materials in commercially available solar devices for developing ultra-high efficiency photovoltaic cells in the future.
High quantum-efficiency photon-number-resolving detector for photonic on-chip information processing
Calkins, Brice; Lita, Adriana E; Metcalf, Benjamin J; Kolthammer, W Steven; Linares, Antia Lamas; Spring, Justin B; Humphreys, Peter C; Mirin, Richard P; Gates, James C; Smith, Peter G R; Walmsley, Ian A; Gerrits, Thomas; Nam, Sae Woo
2013-01-01
The integrated optical circuit is a promising architecture for the realization of complex quantum optical states and information networks. One element that is required for many of these applications is a high-efficiency photon detector capable of photon-number discrimination. We present an integrated photonic system in the telecom band at 1550 nm based on UV-written silica-on-silicon waveguides and modified transition-edge sensors capable of number resolution and over 40% efficiency. Exploiting the mode transmission failure of these devices, we multiplex three detectors in series to demonstrate a combined 79% +/- 2% detection efficiency with a single pass, and 88% +/- 3% at the operating wavelength of an on-chip terminal reflection grating. Furthermore, our optical measurements clearly demonstrate no significant unexplained loss in this system due to scattering or reflections. This waveguide and detector design therefore allows the placement of number-resolving single-photon detectors of predictable efficienc...
Development of III-Sb Quantum Dot Systems for High Efficiency Intermediate Band Solar Cells
Energy Technology Data Exchange (ETDEWEB)
Huffaker, Diana [Univ. of California, Los Angeles, CA (United States); Hubbard, Seth [Rochester Inst. of Technology, NY (United States); Norman, Andrew [National Renewable Energy Lab. (NREL), Golden, CO (United States)
2015-07-31
This project aimed to develop solar cells that can help reduce cost per watt. This work focused on developing solar cells that utilize quantum dot (QD) nanomaterials to provide multijunction solar cell efficiency at the cost of single junction solar cell. We focused on a novel concept known as intermediate band solar cells (IBSC) where an additional energy band is inserted in a single solar cell to accommodate sub-bandgap photons absorption which otherwise are lost through transmission. The additional energy band can be achieved by growing QDs within a solar cell p-n junction. Though numerous studies have been conducted to develop such QD systems, very small improvements in solar energy conversion efficiency have been reported. This is mainly due to non-optimal material parameters such as band gap, band offset etc. In this work, we identified and developed a novel QD material system that meets the requirements of IBSC more closely than the current state-of-the-art technology. To achieve these goals, we focused on three important areas of solar cell design: band structure calculations of new materials, efficient device design for high efficiency, and development of new semiconductor materials. In this project, we focused on III-Sb materials as they possess a wide range of energy bandgaps from 0.2 eV to 2eV. Despite the difficulty involved in realizing these materials, we were successfully developed these materials through a systematic approach. Materials studied in this work are AlAsSb (Aluminum Arsenide Antimonide), InAlAs (Indium Aluminum Arsenide) and InAs (Indium Arsenide). InAs was used to develop QD layers within AlAsSb and InAlAs p-n junctions. As the QDs have very small volume, up to 30 QD layers been inserted into the p-n junction to enhance light absorption. These QD multi-stack devices helped in understanding the challenges associated with the development of quantum dot solar cells. The results from this work show that the quantum dot solar cells indeed
Fu, Chuan-Ji; Zhu, Qin-Sheng; Wu, Shao-Yi
2010-06-01
Based on algebraic dynamics and the concept of the concurrence of the entanglement, we investigate the evolutive properties of the two-qubit entanglement that formed by Heisenberg XXX models under a time-depending external held. For this system, the property of the concurrence that is only dependent on the coupling constant J and total values of the external field is proved. Furthermore, we found that the thermal concurrence of the system under a static random external field is a function of the coupling constant J, temperature T, and the magnitude of external held.
High-Efficiency Colloidal Quantum Dot Photovoltaics via Robust Self-Assembled Monolayers.
Kim, Gi-Hwan; García de Arquer, F Pelayo; Yoon, Yung Jin; Lan, Xinzheng; Liu, Mengxia; Voznyy, Oleksandr; Jagadamma, Lethy Krishnan; Abbas, Abdullah Saud; Yang, Zhenyu; Fan, Fengjia; Ip, Alexander H; Kanjanaboos, Pongsakorn; Hoogland, Sjoerd; Kim, Jin Young; Sargent, Edward H
2015-11-11
The optoelectronic tunability offered by colloidal quantum dots (CQDs) is attractive for photovoltaic applications but demands proper band alignment at electrodes for efficient charge extraction at minimal cost to voltage. With this goal in mind, self-assembled monolayers (SAMs) can be used to modify interface energy levels locally. However, to be effective SAMs must be made robust to treatment using the various solvents and ligands required for to fabricate high quality CQD solids. We report robust self-assembled monolayers (R-SAMs) that enable us to increase the efficiency of CQD photovoltaics. Only by developing a process for secure anchoring of aromatic SAMs, aided by deposition of the SAMs in a water-free deposition environment, were we able to provide an interface modification that was robust against the ensuing chemical treatments needed in the fabrication of CQD solids. The energy alignment at the rectifying interface was tailored by tuning the R-SAM for optimal alignment relative to the CQD quantum-confined electron energy levels. This resulted in a CQD PV record power conversion efficiency (PCE) of 10.7% with enhanced reproducibility relative to controls.
A theoretical model for calculation of the detective quantum efficiency in granular scintillators
Energy Technology Data Exchange (ETDEWEB)
Cavouras, D. E-mail: cavouras@hol.gr; Kandarakis, I.; Tsoukos, S.; Kateris, A.; Nomicos, C.D.; Panayiotakis, G.S
2001-11-01
A theoretical model has been developed for calculating the detective quantum efficiency (DQE) of scintillators, by taking into account the internal structure of granular scintillators often used in medical imaging detectors. Scintillators were considered to consist of N elementary thin layers containing spherical scintillating grains of equal size. Grains were assumed to be regularly distributed within each thin layer, the thickness of the latter being equal to the grain diameter. Values of the X-ray absorption and X-ray attenuation coefficients, of the intrinsic X-ray to light conversion efficiency and of the optical scattering and absorption coefficients were used as input data to the model. Optical scattering and optical absorption coefficients were determined by fitting the model to experimental luminescence data. The model was employed to calculate the detective quantum efficiency of La{sub 2}O{sub 2}S:Tb, Y{sub 2}O{sub 2}S:Tb, Y{sub 2}O{sub 2}S:Eu, ZnSCdS:Ag, ZnSCdS:Au,Cu scintillators. Results of the calculations were found close to values published in previous studies.
Necessary detection efficiencies for secure quantum key distribution and bound randomness
Acín, Antonio; Cavalcanti, Daniel; Passaro, Elsa; Pironio, Stefano; Skrzypczyk, Paul
2016-01-01
In recent years, several hacking attacks have broken the security of quantum cryptography implementations by exploiting the presence of losses and the ability of the eavesdropper to tune detection efficiencies. We present a simple attack of this form that applies to any protocol in which the key is constructed from the results of untrusted measurements performed on particles coming from an insecure source or channel. Because of its generality, the attack applies to a large class of protocols, from standard prepare-and-measure to device-independent schemes. Our attack gives bounds on the critical detection efficiencies necessary for secure quantum key distribution, which show that the implementation of most partly device-independent solutions is, from the point of view of detection efficiency, almost as demanding as fully device-independent ones. We also show how our attack implies the existence of a form of bound randomness, namely nonlocal correlations in which a nonsignalling eavesdropper can find out a posteriori the result of any implemented measurement.
High-Efficiency Colloidal Quantum Dot Photovoltaics via Robust Self-Assembled Monolayers
Kim, Gi-Hwan
2015-11-11
© 2015 American Chemical Society. The optoelectronic tunability offered by colloidal quantum dots (CQDs) is attractive for photovoltaic applications but demands proper band alignment at electrodes for efficient charge extraction at minimal cost to voltage. With this goal in mind, self-assembled monolayers (SAMs) can be used to modify interface energy levels locally. However, to be effective SAMs must be made robust to treatment using the various solvents and ligands required for to fabricate high quality CQD solids. We report robust self-assembled monolayers (R-SAMs) that enable us to increase the efficiency of CQD photovoltaics. Only by developing a process for secure anchoring of aromatic SAMs, aided by deposition of the SAMs in a water-free deposition environment, were we able to provide an interface modification that was robust against the ensuing chemical treatments needed in the fabrication of CQD solids. The energy alignment at the rectifying interface was tailored by tuning the R-SAM for optimal alignment relative to the CQD quantum-confined electron energy levels. This resulted in a CQD PV record power conversion efficiency (PCE) of 10.7% with enhanced reproducibility relative to controls.
Harmonic bath averaged Hamiltonian: an efficient tool to capture quantum effects of large systems.
Yang, Yonggang; Liu, Xiaomeng; Meuwly, Markus; Xiao, Liantuan; Jia, Suotang
2012-11-26
Starting from a reaction path Hamiltonian, a suitably reduced harmonic bath averaged Hamiltonian is derived by averaging over all the normal mode coordinates. Generalization of the harmonic bath averaged Hamiltonian to any dimensions are performed and the feasibility to use a linear reaction path/surface are investigated and discussed. By use of a harmonic bath averaged Hamiltonian, the tunneling splitting and proton transfer dynamics of malonaldehyde is briefly discussed and shows that the harmonic bath averaged Hamiltonian is an efficient tool to capture quantum effects in larger systems.
Information detective quantum efficiency of X-ray film-intensifier foil systems
Energy Technology Data Exchange (ETDEWEB)
Hoeschen, D.; Stargardt, A.; Mirande, W.
1988-04-01
The capability of screen-film combinations of detection and representation of information is described by the detective quantum efficiency (DQE). The DQE may be calculated from the sensitivity, the gradient of the characteristic curve, the modulation transfer function and the Wiener spectrum. These parameters have been determined for fourteen screen-film combinations and the DQE's have been calculated. It is shown that the low frequency region the DQE does not depend on spatial frequency. This constant level of DQE is mostly dependent on the absorbance of the screens. Consequences from this fact, as well for the manufacturer as for the user of the screens, are discussed.
A one-dimensional model for the quantum efficiency of front-surface-field solar cells
Yernaux, M. I.; Battochio, C.; Verlinden, P.; van de Wiele, F.
1984-11-01
A one-dimensional analytical model is proposed to calculate the photocurrent generated in interdigitated back contact solar cells with a high-low junction at the front illuminated surface. The high-low junction is simulated by constant doping levels, mobilities and lifetimes. A study of the quantum efficiency of front-surface-field (FSF) solar cells is made and the computer results are compared with experimental results. A method of determining the real and the effective surface recombination velocity of FSF solar cells is proposed.
Wu, Jianlan; Ma, Jian; Silbey, Robert J; Cao, Jianshu
2011-01-01
Following the calculation of optimal energy transfer in thermal environment in our first paper (New J. Phys. {\\bf 12}, 105012), full quantum dynamics and leading-order `classical' hopping kinetics are compared for the Fenna-Matthews-Olson (FMO) protein complex with the thermal bath described by classical white noise (the Haken-Strobl model) and by quantum Debye noise. Because the two-site quantum dynamics is fully captured by the hopping kinetics, the difference between the quantum dynamics and 'classical' kinetics is due to higher-order quantum corrections, which include non-local multi-site coherence, i.e. long-range coherence. We observe that higher-order quantum correction leads to small changes in the trapping time or in energy transfer efficiency. (1-2% in the Haken-Strobl model and $\\lessapprox 10%$ in the quantum Debye model), suggesting that quantum coherence does not extend beyond a pair of sites in FMO and the optimal efficiency in FMO can be explained by Forster rate theory. However, using the pop...
Lin, Chien-chung; Chen, Hsin-Chu; Han, Hau-Vei; Tsai, Yu-Lin; Chang, Chia-Hua; Tsai, Min-An; Kuo, Hao-Chung; Yu, Peichen
2012-02-01
Improvement of efficiency for crystalline silicon (c-Si) with nanopillar arrays (NPAs) solar cell was demonstrated by deployment of CdS quantum dots (QDs). The NPAs was fabricated by colloidal lithography of self-assembled polystyrene (PS) nanospheres with a 600 nm in size and reactive-ion etching techniques, and then a colloidal CdS QDs with a concentration of 5 mg/mL was spun on the surface of c-Si with NPAs solar cell. Under a simulated one-sun condition, the device with CdS QDs shows a 33% improvement of power conversion efficiency, compared with the one without QDs. Additionally, we also found that the device with CdS QDs shows a 32% reduction in electrical resistance, compared with the one without QDs solar cell, under an ultraviolet (UV) light of 355nm illumination. This reduced electrical resistance can directly contribute to our fill-factor (FF) enhancement. For further investigation, the excitation spectrum of photoluminescence (PL), absorbance spectrum, current-voltage (I-V) characteristics, reflectance and external quantum efficiency (EQE) of the device were measured and analyzed. Based on the spectral response and optical measurement, we believe that CdS QDs not only have the capability for photon down-conversion in ultraviolet region, but also provide extra antireflection capability.
Practical expressions describing detective quantum efficiency in flat-panel detectors
Kim, H. K.
2011-11-01
In radiology, image quality excellence is a balance between system performance and patient dose, hence x-ray systems must be designed to ensure the maximum image quality is obtained for the lowest consistent dose. The concept of detective quantum efficiency (DQE) is widely used to quantify, understand, measure, and predict the performance of x-ray detectors and imaging systems. Cascaded linear-systems theory can be used to estimate DQE based on the system design parameters and this theoretical DQE can be utilized for determining the impact of various physical processes, such as secondary quantum sinks, noise aliasing, reabsorption noise, and others. However, the prediction of DQE usually requires tremendous efforts to determine each parameter consisting of the cascaded linear-systems model. In this paper, practical DQE formalisms assessing both the photoconductor- and scintillator-based flat-panel detectors under quantum-noise-limited operation are described. The developed formalisms are experimentally validated and discussed for their limits. The formalisms described in this paper would be helpful for the rapid prediction of the DQE performances of developing systems as well as the optimal design of systems.
Near-Unity Internal Quantum Efficiency of Luminescent Silicon Nanocrystals with Ligand Passivation.
Sangghaleh, Fatemeh; Sychugov, Ilya; Yang, Zhenyu; Veinot, Jonathan G C; Linnros, Jan
2015-07-28
Spectrally resolved photoluminescence (PL) decays were measured for samples of colloidal, ligand-passivated silicon nanocrystals. These samples have PL emission energies with peak positions in the range ∼1.4-1.8 eV and quantum yields of ∼30-70%. Their ensemble PL decays are characterized by a stretched-exponential decay with a dispersion factor of ∼0.8, which changes to an almost monoexponential character at fixed detection energies. The dispersion factors and decay rates for various detection energies were extracted from spectrally resolved curves using a mathematical approach that excluded the effect of homogeneous line width broadening. Since nonradiative recombination would introduce a random lifetime variation, leading to a stretched-exponential decay for an ensemble, we conclude that the observed monoexponential decay in size-selected ensembles signifies negligible nonradiative transitions of a similar strength to the radiative one. This conjecture is further supported as extracted decay rates agree with radiative rates reported in the literature, suggesting 100% internal quantum efficiency over a broad range of emission wavelengths. The apparent differences in the quantum yields can then be explained by a varying fraction of "dark" or blinking nanocrystals.
Meinardi, Francesco; Ehrenberg, Samantha; Dhamo, Lorena; Carulli, Francesco; Mauri, Michele; Bruni, Francesco; Simonutti, Roberto; Kortshagen, Uwe; Brovelli, Sergio
2017-02-01
Building-integrated photovoltaics is gaining consensus as a renewable energy technology for producing electricity at the point of use. Luminescent solar concentrators (LSCs) could extend architectural integration to the urban environment by realizing electrode-less photovoltaic windows. Crucial for large-area LSCs is the suppression of reabsorption losses, which requires emitters with negligible overlap between their absorption and emission spectra. Here, we demonstrate the use of indirect-bandgap semiconductor nanostructures such as highly emissive silicon quantum dots. Silicon is non-toxic, low-cost and ultra-earth-abundant, which avoids the limitations to the industrial scaling of quantum dots composed of low-abundance elements. Suppressed reabsorption and scattering losses lead to nearly ideal LSCs with an optical efficiency of η = 2.85%, matching state-of-the-art semi-transparent LSCs. Monte Carlo simulations indicate that optimized silicon quantum dot LSCs have a clear path to η > 5% for 1 m2 devices. We are finally able to realize flexible LSCs with performances comparable to those of flat concentrators, which opens the way to a new design freedom for building-integrated photovoltaics elements.
Energy Technology Data Exchange (ETDEWEB)
Correa, J. D. [Departamento de Ciencias Básicas, Universidad de Medellín, Medellín (Colombia); Mora-Ramos, M. E., E-mail: memora@uaem.mx [Facultad de Ciencias, Universidad Autónoma del Estado de Morelos, Av. Universidad 1001, CP 62209 Cuernavaca, Morelos (Mexico); Duque, C. A. [Grupo de Materia Condensada-UdeA, Instituto de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín (Colombia)
2014-06-07
We report a study on the optical absorption coefficient associated to hydrogenic impurity interstate transitions in zinc-blende GaN quantum wires of cylindrical shape taking into account the effects of externally applied static electric and magnetic fields. The electron states emerge within the effective mass approximation, via the exact diagonalization of the donor-impurity Hamiltonian with parabolic confinement and external field effects. The nonlinear optical absorption is calculated using a recently derived expression for the dielectric susceptibility, obtained via a nonperturbative solution of the density-matrix Bloch equation. Our results show that this treatment eliminates not only the intensity-dependent bleaching effect but also the change in sign of the nonlinear contribution due to the combined effect of asymmetric impurity location and the applied electric field.
Correa, J. D.; Mora-Ramos, M. E.; Duque, C. A.
2014-06-01
We report a study on the optical absorption coefficient associated to hydrogenic impurity interstate transitions in zinc-blende GaN quantum wires of cylindrical shape taking into account the effects of externally applied static electric and magnetic fields. The electron states emerge within the effective mass approximation, via the exact diagonalization of the donor-impurity Hamiltonian with parabolic confinement and external field effects. The nonlinear optical absorption is calculated using a recently derived expression for the dielectric susceptibility, obtained via a nonperturbative solution of the density-matrix Bloch equation. Our results show that this treatment eliminates not only the intensity-dependent bleaching effect but also the change in sign of the nonlinear contribution due to the combined effect of asymmetric impurity location and the applied electric field.
Simple formalism for efficient derivatives and multi-determinant expansions in quantum Monte Carlo
Filippi, Claudia; Assaraf, Roland; Moroni, Saverio
2016-05-01
We present a simple and general formalism to compute efficiently the derivatives of a multi-determinant Jastrow-Slater wave function, the local energy, the interatomic forces, and similar quantities needed in quantum Monte Carlo. Through a straightforward manipulation of matrices evaluated on the occupied and virtual orbitals, we obtain an efficiency equivalent to algorithmic differentiation in the computation of the interatomic forces and the optimization of the orbital parameters. Furthermore, for a large multi-determinant expansion, the significant computational gain afforded by a recently introduced table method is here extended to the local value of any one-body operator and to its derivatives, in both all-electron and pseudopotential calculations.
Efficient molecular quantum dynamics in coordinate and phase space using pruned bases
Larsson, Henrik R; Tannor, David J
2016-01-01
We present an efficient implementation of dynamically pruned quantum dynamics, both in coordinate space and in phase space. We combine the ideas behind the biorthogonal von Neumann basis (PvB) with the orthogonalized momentum-symmetrized Gaussians (Weylets) to create a new basis, projected Weylets, that takes the best from both methods. We benchmark pruned dynamics using phase-space-localized PvB, projected Weylets, and coordinate-space-localized DVR bases, with real-world examples in up to six dimensions. We show that coordinate-space localization is most important for efficient pruning and that pruned dynamics is much faster compared to unpruned, exact dynamics. Phase-space localization is useful for more demanding dynamics where many basis functions are required. There, projected Weylets offer a more compact representation than pruned DVR bases.
Efficient molecular quantum dynamics in coordinate and phase space using pruned bases
Larsson, H. R.; Hartke, B.; Tannor, D. J.
2016-11-01
We present an efficient implementation of dynamically pruned quantum dynamics, both in coordinate space and in phase space. We combine the ideas behind the biorthogonal von Neumann basis (PvB) with the orthogonalized momentum-symmetrized Gaussians (Weylets) to create a new basis, projected Weylets, that takes the best from both methods. We benchmark pruned time-dependent dynamics using phase-space-localized PvB, projected Weylets, and coordinate-space-localized DVR bases, with real-world examples in up to six dimensions. For the examples studied, coordinate-space localization is the most important factor for efficient pruning and the pruned dynamics is much faster than the unpruned, exact dynamics. Phase-space localization is useful for more demanding dynamics where many basis functions are required. There, projected Weylets offer a more compact representation than pruned DVR bases.
Courtney, Joseph M; Rienstra, Chad M
2016-08-01
We present a systematic study of dipolar double quantum (DQ) filtering in (13)C-labeled organic solids over a range of magic-angle spinning rates, using the SPC-n recoupling sequence element with a range of n symmetry values from 3 to 11. We find that efficient recoupling can be achieved for values n⩾7, provided that the (13)C nutation frequency is on the order of 100kHz or greater. The decoupling-field dependence was investigated and explicit heteronuclear decoupling interference conditions identified. The major determinant of DQ filtering efficiency is the decoupling interference between (13)C and (1)H fields. For (13)C nutation frequencies greater than 75kHz, optimal performance is observed without an applied (1)H field. At spinning rates exceeding 20kHz, symmetry conditions as low as n=3 were found to perform adequately.
Ivanov, Mikhail V; Babikov, Dmitri
2012-05-14
Efficient method is proposed for computing thermal rate constant of recombination reaction that proceeds according to the energy transfer mechanism, when an energized molecule is formed from reactants first, and is stabilized later by collision with quencher. The mixed quantum-classical theory for the collisional energy transfer and the ro-vibrational energy flow [M. Ivanov and D. Babikov, J. Chem. Phys. 134, 144107 (2011)] is employed to treat the dynamics of molecule + quencher collision. Efficiency is achieved by sampling simultaneously (i) the thermal collision energy, (ii) the impact parameter, and (iii) the incident direction of quencher, as well as (iv) the rotational state of energized molecule. This approach is applied to calculate third-order rate constant of the recombination reaction that forms the (16)O(18)O(16)O isotopomer of ozone. Comparison of the predicted rate vs. experimental result is presented.
Two-Step Efficient Deterministic Secure Quantum Communication Using Three-Qubit W State
Institute of Scientific and Technical Information of China (English)
YUAN Hao; ZHOU Jun; ZHANG Gang; WEI Xiang-Fei; LIU Xiang-Yuan
2011-01-01
A two-step deterministic secure quantum communication (DSQC) scheme using blocks of three-qubit W state is proposed. In this scheme, the secret messages can be encoded by employing four two-particle unitary operations and directly decoded by utilizing the corresponding measurements in Bell basis or single-particle basis. Comparing with most previous DSQC protocols, the present scheme has a high total efficiency, which comes up to 50％. Apart from this,it has still the advantages of high capacity as each W state can carry two bits of secret information, and high intrinsic efficiency because almost all the instances are useful. Furthermore, the security of this communication can be ensured by the decoy particle checking technique and the two-step transmitting idea.
Simple formalism for efficient derivatives and multi-determinant expansions in quantum Monte Carlo.
Filippi, Claudia; Assaraf, Roland; Moroni, Saverio
2016-05-21
We present a simple and general formalism to compute efficiently the derivatives of a multi-determinant Jastrow-Slater wave function, the local energy, the interatomic forces, and similar quantities needed in quantum Monte Carlo. Through a straightforward manipulation of matrices evaluated on the occupied and virtual orbitals, we obtain an efficiency equivalent to algorithmic differentiation in the computation of the interatomic forces and the optimization of the orbital parameters. Furthermore, for a large multi-determinant expansion, the significant computational gain afforded by a recently introduced table method is here extended to the local value of any one-body operator and to its derivatives, in both all-electron and pseudopotential calculations.
Efficient and universal quantum key distribution based on chaos and middleware
Jiang, Dong; Chen, Yuanyuan; Gu, Xuemei; Xie, Ling; Chen, Lijun
2017-01-01
Quantum key distribution (QKD) promises unconditionally secure communications, however, the low bit rate of QKD cannot meet the requirements of high-speed applications. Despite the many solutions that have been proposed in recent years, they are neither efficient to generate the secret keys nor compatible with other QKD systems. This paper, based on chaotic cryptography and middleware technology, proposes an efficient and universal QKD protocol that can be directly deployed on top of any existing QKD system without modifying the underlying QKD protocol and optical platform. It initially takes the bit string generated by the QKD system as input, periodically updates the chaotic system, and efficiently outputs the bit sequences. Theoretical analysis and simulation results demonstrate that our protocol can efficiently increase the bit rate of the QKD system as well as securely generate bit sequences with perfect statistical properties. Compared with the existing methods, our protocol is more efficient and universal, it can be rapidly deployed on the QKD system to increase the bit rate when the QKD system becomes the bottleneck of its communication system.
Efficient inorganic solid solar cells composed of perovskite and PbS quantum dots
Li, Yi; Zhu, Jun; Huang, Yang; Wei, Junfeng; Liu, Feng; Shao, Zhipeng; Hu, Linhua; Chen, Shuanghong; Yang, Shangfeng; Tang, Junwang; Yao, Jianxi; Dai, Songyuan
2015-05-01
Lead halide perovskite solar cells have attracted great interest due to their high efficiency and simple fabrication process. However, the high efficiency heavily relies on expensive organic hole-transporting materials (OHTMs) such as 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-MeOTAD), it is preferable to replace these expensive OHTMs by inorganic and low cost materials. Here, we report colloidal PbS quantum dots synthesized by a facile method and used as the inorganic hole-transporting material in a hybrid perovskite solar cell. By controlling the crystalline morphology of the perovskite capping layer, the recombination process is significantly retarded. Furthermore, a pure inorganic solar cell prepared by a two-step process demonstrated a nearly 8% power conversion efficiency due to efficient charge separation by a cascade of junctions and retarding charge recombination by a void-free capping layer. The stability of the inorganic solar cell was also tested with a little decay observed within ca. 100 h.Lead halide perovskite solar cells have attracted great interest due to their high efficiency and simple fabrication process. However, the high efficiency heavily relies on expensive organic hole-transporting materials (OHTMs) such as 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-MeOTAD), it is preferable to replace these expensive OHTMs by inorganic and low cost materials. Here, we report colloidal PbS quantum dots synthesized by a facile method and used as the inorganic hole-transporting material in a hybrid perovskite solar cell. By controlling the crystalline morphology of the perovskite capping layer, the recombination process is significantly retarded. Furthermore, a pure inorganic solar cell prepared by a two-step process demonstrated a nearly 8% power conversion efficiency due to efficient charge separation by a cascade of junctions and retarding charge recombination by a void-free capping layer
Zhu, Haiming; Song, Nianhui; Lian, Tianquan
2013-08-07
In quantum dot (QD) sensitized solar cells (QDSSCs), redox electrolytes act as hole scavengers to regenerate the QD ground state from its oxidized form, thus enabling a continuous device operation. However, unlike molecular sensitizers, QDs also have redox-active trap states within the band gap, which can be charged in the presence of redox electrolyte. The effects of electrolyte induced charging of QDs on the performance of QDSSCs have not been reported. Here, using steady-state and time-resolved absorption and emission spectroscopy, we show that CdSe/CdS3MLZnCdS2MLZnS2ML core/multishell QDs are charged in the presence of sulfide electrolytes due to the reduction of surface states. As a result, exciton lifetimes in these QDs are shortened due to an Auger recombination process. Such charging induced fast Auger recombination can compete effectively with electron transfer from QDs to TiO2 and reduce the electron injection efficiency in QDSSCs. We believe that the reported charging effects are present for most colloidal nanocrystals in the presence of redox media and have important implications for designing QD-based photovoltaic and photocatalytic devices.
Kozlovsky, William J.; Nabors, C. D.; Byer, Robert L.
1988-01-01
56-percent efficient external-cavity-resonant second-harmonic generation of a diode-laser pumped, CW single-axial-mode Nd:YAG laser is reported. A theory of external doubling with a resonant fundamental is presented and compared to experimental results for three monolithic cavities of nonlinear MgO:LiNbO3. The best conversion efficiency was obtained with a 12.5-mm-long monolithic ring cavity doubler, which produced 29.7 mW of CW, single-axial model 532-nm radiation from an input of 52.5 mW.
Influence of dislocation density on internal quantum efficiency of GaN-based semiconductors
Directory of Open Access Journals (Sweden)
Jiadong Yu
2017-03-01
Full Text Available By considering the effects of stress fields coming from lattice distortion as well as charge fields coming from line charges at edge dislocation cores on radiative recombination of exciton, a model of carriers’ radiative and non-radiative recombination has been established in GaN-based semiconductors with certain dislocation density. Using vector average of the stress fields and the charge fields, the relationship between dislocation density and the internal quantum efficiency (IQE is deduced. Combined with related experimental results, this relationship is fitted well to the trend of IQEs of bulk GaN changing with screw and edge dislocation density, meanwhile its simplified form is fitted well to the IQEs of AlGaN multiple quantum well LEDs with varied threading dislocation densities but the same light emission wavelength. It is believed that this model, suitable for different epitaxy platforms such as MOCVD and MBE, can be used to predict to what extent the luminous efficiency of GaN-based semiconductors can still maintain when the dislocation density increases, so as to provide a reasonable rule of thumb for optimizing the epitaxial growth of GaN-based devices.
Energy Technology Data Exchange (ETDEWEB)
Sertore, Daniele, E-mail: daniele.sertore@mi.infn.it; Michelato, Paolo; Monaco, Laura [Istituto Nazionale di Fisica Nucleare Sez. Milano – LASA, Via Fratelli Cervi 201, I-20090 Segrate (Italy); Manini, Paolo; Siviero, Fabrizio [SAES Getters S.p.A., Viale Italia 77, 20020 Lainate (Italy)
2014-05-15
High quantum efficiency photocathodes are routinely used as laser triggered emitters in the advanced high brightness electron sources based on radio frequency guns. The sensitivity of “semiconductor” type photocathodes to vacuum levels and gas composition requires special care during preparation and handling. This paper will discuss the results obtained using a novel pumping approach based on coupling a 20 l s{sup −1} sputter ion getter pump with a CapaciTorr® D100 non evaporable getter (NEG) pump. A pressure of 8⋅10{sup −8} Pa was achieved using only a sputter ion pump after a 6 day bake-out. With the addition of a NEG pump, a pressure of 2⋅10{sup −9} Pa was achieved after a 2 day bake-out. These pressure values were maintained without power due to the ability of the NEG to pump gases by chemical reaction. Long term monitoring of cathodes quantum efficiencies was also carried out at different photon wavelengths for more than two years, showing no degradation of the photoemissive film properties.
Directory of Open Access Journals (Sweden)
A. Malasi
2016-10-01
Full Text Available Plasmonic nanoparticles are amongst the most effective ways to resonantly couple optical energy into and out of nanometer sized volumes. However, controlling and/or tuning the transfer of this incident energy to the surrounding near and far field is one of the most interesting challenges in this area. Due to the dielectric properties of metallic silver (Ag, its nanoparticles have amongst the highest radiative quantum efficiencies (η, i.e., the ability to radiatively transfer the incident energy to the surrounding. Here we report the discovery that bimetallic nanoparticles of Ag made with immiscible and plasmonically weak Co metal can show comparable and/or even higher η values. The enhancement is a result of the narrowing of the plasmon bandwidth from these bimetal systems. The phenomenological explanation of this effect based on the dipolar approximation points to the reduction in radiative losses within the Ag nanoparticles when in contact with cobalt. This is also supported by a model of coupling between poor and good conductors based on the surface to volume ratio. This study presents a new type of bandwidth engineering, one based on using bimetal nanostructures, to tune and/or enhance the quality factor and quantum efficiency for near and far-field plasmonic applications.
High Efficiency Quantum Well Waveguide Solar Cells and Methods for Constructing the Same
Welser, Roger E. (Inventor); Sood, Ashok K. (Inventor)
2014-01-01
Photon absorption, and thus current generation, is hindered in conventional thin-film solar cell designs, including quantum well structures, by the limited path length of incident light passing vertically through the device. Optical scattering into lateral waveguide structures provides a physical mechanism to increase photocurrent generation through in-plane light trapping. However, the insertion of wells of high refractive index material with lower energy gap into the device structure often results in lower voltage operation, and hence lower photovoltaic power conversion efficiency. The voltage output of an InGaAs quantum well waveguide photovoltaic device can be increased by employing a III-V material structure with an extended wide band gap emitter heterojunction. Analysis of the light IV characteristics reveals that non-radiative recombination components of the underlying dark diode current have been reduced, exposing the limiting radiative recombination component and providing a pathway for realizing solar-electric conversion efficiency of 30% or more in single junction cells.