WorldWideScience

Sample records for explosive speciation key-innovations

  1. Key innovations and the ecology of macroevolution.

    Science.gov (United States)

    Hunter, J P

    1998-01-01

    The origin or evolutionary `success' of taxa is often attributed to key innovations-aspects of organismal phenotype that promote diversification. Different ways of delimiting taxa and measuring `success' (i.e. number or longevity of species, morphological variety or differential control of energy) give rise to different ideas of how key innovations might operate. Key innovations may enhance competitive ability, relax adaptive trade-offs or permit exploitation of a new productive resource base. Recent key innovation studies comparing species richness in extant sister clades may miss important observations possible only with consideration of the fossil record, traditional higher taxa and phenotypic diversity.

  2. Phylogenetic tests for evolutionary innovation: the problematic link between key innovations and exceptional diversification.

    Science.gov (United States)

    Rabosky, Daniel L

    2017-12-05

    Evolutionary innovation contributes to the spectacular diversity of species and phenotypes across the tree of life. 'Key innovations' are widely operationalized within evolutionary biology as traits that facilitate increased diversification rates, such that lineages bearing the traits ultimately contain more species than closely related lineages lacking the focal trait. In this article, I briefly review the inference, analysis and interpretation of evolutionary innovation on phylogenetic trees. I argue that differential rates of lineage diversification should not be used as the basis for key innovation tests, despite the statistical tractability of such approaches. Under traditional interpretations of the macroevolutionary 'adaptive zone', we should not necessarily expect key innovations to confer faster diversification rates upon lineages that possess them relative to their extant sister clades. I suggest that a key innovation is a trait that allows a lineage to interact with the environment in a fundamentally different way and which, as a result, increases the total diversification-but not necessarily the diversification rate-of the parent clade. Considered alone, branching patterns in phylogenetic trees are poorly suited to the inference of evolutionary innovation due to their inherently low information content with respect to the processes that produce them. However, phylogenies may be important for identifying transformational shifts in ecological and morphological space that are characteristic of innovation at the macroevolutionary scale.This article is part of the themed issue 'Process and pattern in innovations from cells to societies'. © 2017 The Author(s).

  3. Expert Meeting Report: Key Innovations for Adding Energy Efficiency to Maintenance Projects

    Energy Technology Data Exchange (ETDEWEB)

    Wood, A.; Wiehagen, J.

    2012-09-01

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic, Key Innovations for Adding Energy Efficiency to Maintenance Projects, was intended to provide direction to more focused efforts to increase the efficiency of existing homes; in this meeting, the focus was specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  4. Multiple continental radiations and correlates of diversification in Lupinus (Leguminosae): testing for key innovation with incomplete taxon sampling.

    Science.gov (United States)

    Drummond, Christopher S; Eastwood, Ruth J; Miotto, Silvia T S; Hughes, Colin E

    2012-05-01

    results are consistent with the hypothesis that iteroparity functioned as an adaptive key innovation, providing a mechanism for range expansion and rapid divergence in upper elevation regions across much of the New World.

  5. Diversification in vipers: Phylogenetic relationships, time of divergence and shifts in speciation rates.

    Science.gov (United States)

    Alencar, Laura R V; Quental, Tiago B; Grazziotin, Felipe G; Alfaro, Michael L; Martins, Marcio; Venzon, Mericien; Zaher, Hussam

    2016-12-01

    Snakes of the cosmopolitan family Viperidae comprise around 329 venomous species showing a striking heterogeneity in species richness among lineages. While the subfamily Azemiopinae comprises only two species, 70% of all viper species are arranged in the subfamily Crotalinae or the "pit vipers". The radiation of the pit vipers was marked by the evolution of the heat-sensing pits, which has been suggested to be a key innovation for the successful diversification of the group. Additionally, only crotalines were able to successfully colonize the New World. Here, we present the most complete molecular phylogeny for the family to date that comprises sequences from nuclear and mitochondrial genes representing 79% of all living vipers. We also investigated the time of divergence between lineages, using six fossils to calibrate the tree, and explored the hypothesis that crotalines have undergone an explosive radiation. Our phylogenetic analyses retrieved high support values for the monophyly of the family Viperidae, subfamilies Viperinae and Crotalinae, and 22 out of 27 genera, as well as well-supported intergeneric relationships throughout the family. We were able to recover a strongly supported sister clade to the New World pit vipers that comprises Gloydius, Ovophis, Protobothrops and Trimeresurus gracilis. Our results agree in many aspects with other studies focusing on the phylogenetics of vipers, but we recover new relationships as well. Despite the addition of new sequences we were not able to resolve some of the poor supported relationships previously suggested. Time of divergence estimates suggested that vipers started to radiate around the late Paleocene to middle Eocene with subfamilies most likely dating back to the Eocene. The invasion of the New World might have taken place sometime close to the Oligocene/Miocene boundary. Diversification analyses suggested a shift in speciation rates during the radiation of a sub-clade of pit vipers where speciation rates

  6. Phylogenetic distribution of extant richness suggests metamorphosis is a key innovation driving diversification in insects.

    Science.gov (United States)

    Rainford, James L; Hofreiter, Michael; Nicholson, David B; Mayhew, Peter J

    2014-01-01

    Insects and their six-legged relatives (Hexapoda) comprise more than half of all described species and dominate terrestrial and freshwater ecosystems. Understanding the macroevolutionary processes generating this richness requires a historical perspective, but the fossil record of hexapods is patchy and incomplete. Dated molecular phylogenies provide an alternative perspective on divergence times and have been combined with birth-death models to infer patterns of diversification across a range of taxonomic groups. Here we generate a dated phylogeny of hexapod families, based on previously published sequence data and literature derived constraints, in order to identify the broad pattern of macroevolutionary changes responsible for the composition of the extant hexapod fauna. The most prominent increase in diversification identified is associated with the origin of complete metamorphosis, confirming this as a key innovation in promoting insect diversity. Subsequent reductions are recovered for several groups previously identified as having a higher fossil diversity during the Mesozoic. In addition, a number of recently derived taxa are found to have radiated following the development of flowering plant (angiosperm) floras during the mid-Cretaceous. These results reveal that the composition of the modern hexapod fauna is a product of a key developmental innovation, combined with multiple and varied evolutionary responses to environmental changes from the mid Cretaceous floral transition onward.

  7. Live-birth in vipers (Viperidae) is a key innovation and adaptation to global cooling during the Cenozoic.

    Science.gov (United States)

    Lynch, Vincent J

    2009-09-01

    The identification of adaptations and key innovations has long interested biologists because they confer on organisms the ability to exploit previously unavailable ecological resources and respond to novel selective pressures. Although it can be extremely difficult to test for the effects of a character on the rate of lineage diversification, the convergent evolution of a character in multiple lineages provides an excellent opportunity to test for the effect of that character on lineage diversification. Here, I examine the effect of parity mode on the diversification of vipers, which have independently evolved viviparity in at least 13 lineages. I find strong statistical evidence that viviparous species diversify at a greater rate than oviparous species and correlate major decreases in the diversification rate of oviparous species with periods of global cooling, such as the Oligocene. These results suggest that the evolution of viviparity buffered live-bearing species against the negative effects of global climate change during the Cenozoic, and was a key innovation in the evolution and diversification of live-bearing vipers.

  8. Explosives tester

    Science.gov (United States)

    Haas, Jeffrey S [San Ramon, CA; Howard, Douglas E [Livermore, CA; Eckels, Joel D [Livermore, CA; Nunes, Peter J [Danville, CA

    2011-01-11

    An explosives tester that can be used anywhere as a screening tool by non-technical personnel to determine whether a surface contains explosives. First and second explosives detecting reagent holders and dispensers are provided. A heater is provided for receiving the first and second explosives detecting reagent holders and dispensers.

  9. Primary explosives

    Energy Technology Data Exchange (ETDEWEB)

    Matyas, Robert; Pachman, Jiri [Pardubice Univ. (Czech Republic). Faculty of Chemical Technology

    2013-06-01

    The first chapter provides background such as the basics of initiation and differences between requirements on primary explosives used in detonators and igniters. The authors then clarify the influence of physical characteristics on explosive properties, focusing on those properties required for primary explosives. Furthermore, the issue of sensitivity is discussed. All the chapters on particular groups of primary explosives are structured in the same way, including introduction, physical and chemical properties, explosive properties, preparation and documented use.

  10. Liquid explosives

    CERN Document Server

    Liu, Jiping

    2015-01-01

    The book drawing on the author's nearly half a century of energetic materials research experience intends to systematically review the global researches on liquid explosives. The book focuses on the study of the conception, explosion mechanism, properties and preparation of liquid explosives. It provides a combination of theoretical knowledge and practical examples in a reader-friendly style. The book is likely to be interest of university researchers and graduate students in the fields of energetic materials, blasting engineering and mining.

  11. Explosive compositions

    Energy Technology Data Exchange (ETDEWEB)

    Craig, J.F.M.; Falconer, E.L.

    1971-04-13

    A thickening agent for an aqueous slurry explosive composition consists of the combination of a cross-linked galactomannan with psyllium flour in specific proportions. This thickener provides good fluidity and reduced tackiness. (7 claims)

  12. Arsenic speciation results

    Data.gov (United States)

    U.S. Environmental Protection Agency — Linear combination fitting results of synchrotron data to determine arsenic speciation in soil samples. This dataset is associated with the following publication:...

  13. Searching for speciation genes

    DEFF Research Database (Denmark)

    Holt, Benjamin George; Côté, Isabelle M; Emerson, Brent C

    2011-01-01

    Closely related species that show clear phenotypic divergence, but without obvious geographic barriers, can provide opportunities to study how diversification can occur when opportunities for allopatric speciation are limited. We examined genetic divergence in the coral reef fish genus Hypoplectrus...

  14. Speciation of Dissolved Cadmium

    DEFF Research Database (Denmark)

    Holm, Peter Engelund; Andersen, Sjur; Christensen, Thomas Højlund

    1995-01-01

    Equilibrium dialysis and ion exchange methods, as well as computer calculations (GEOCHEM), were applied for speciation of dissolved cadmium (Cd) in test solutions and leachate samples. The leachate samples originated from soil, compost, landfill waste and industrial waste. The ion exchange (IE...... leachates showed different Cd speciation patterns as expected. Some leachates were dominated by free divalent Cd (1-70%), some by inorganic complexes (1-87%), and some by organic complexes (7-98%)....

  15. Uranium speciation in plants

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, A.; Bernhard, G.; Geipel, G.; Reich, T.; Rossberg, A. [Forschungszentrum Rossendorf e.V., Inst. of Radiochemistry, Dresden (Germany); Nitsche, H. [Univ. of California at Berkeley and Lawrence Berkeley National Lab., Nuclear Sciences Div., Berkeley, CA (United States)

    2003-07-01

    Detailed knowledge of the nature of uranium complexes formed after the uptake by plants is an essential prerequisite to describe the migration behavior of uranium in the environment. This study focuses on the determination of uranium speciation after uptake of uranium by lupine plants. For the first time, time-resolved laser-induced fluorescence spectroscopy and X-ray absorption spectroscopy were used to determine the chemical speciation of uranium in plants. Differences were detected between the uranium speciation in the initial solution (hydroponic solution and pore water of soil) and inside the lupine plants. The oxidation state of uranium did not change and remained hexavalent after it was taken up by the lupine plants. The chemical speciation of uranium was identical in the roots, shoot axis, and leaves and was independent of the uranium speciation in the uptake solution. The results indicate that the uranium is predominantly bound as uranyl(VI) phosphate to the phosphoryl groups. Dandelions and lamb's lettuce showed uranium speciation identical to lupine plants. (orig.)

  16. Explosive Pleuritis

    Directory of Open Access Journals (Sweden)

    Jasdeep K Sharma

    2001-01-01

    Full Text Available The objective of the present paper is to describe the clinical and computed tomography features of 'explosive pleuritis', an entity first named by Braman and Donat in 1986, and to propose a case definition. A case report of a previously healthy, 45-year-old man admitted to hospital with acute onset pleuritic chest pain is presented. The patient arrived at the emergency room at 15:00 in mild respiratory distress; the initial chest x-ray revealed a small right lower lobe effusion. The subsequent clinical course in hospital was dramatic. Within 18 h of admission, he developed severe respiratory distress with oxygen desaturation to 83% on room air and dullness of the right lung field. A repeat chest x-ray, taken the morning after admission, revealed complete opacification of the right hemithorax. A computed tomography scan of the thorax demonstrated a massive pleural effusion with compression of pulmonary tissue and mediastinal shift. Pleural fluid biochemical analysis revealed the following concentrations: glucose 3.5 mmol/L, lactate dehydrogenase 1550 U/L, protein 56.98 g/L, amylase 68 U/L and white blood cell count 600 cells/mL. The pleural fluid cultures demonstrated light growth of coagulase-negative staphylococcus and viridans streptococcus, and very light growth of Candida albicans. Cytology was negative for malignant cells. Thoracotomy was performed, which demonstrated a loculated parapneumonic effusion that required decortication. The patient responded favourably to the empirical administration of intravenous levofloxacin and ceftriaxone, and conservative surgical methods in the management of the empyema. This report also discusses the patient's rapidly progressing pleural effusion and offers a potential case definition for explosive pleuritis. Explosive pleuritis is a medical emergency defined by the rapid development of a pleural effusion involving more than 90% of the hemithorax over 24 h, which causes compression of pulmonary tissue and

  17. SPECIATE and using the Speciation Tool to prepare VOC and PM chemical speciation profiles for air quality modeling

    Science.gov (United States)

    This product provides training to air pollution inventory and modeling professionals to understand the US EPA's SPECIATE database base and Speciation Tool and their use to develop speciated emission inventories.

  18. Explosive Formulation Pilot Plant

    Data.gov (United States)

    Federal Laboratory Consortium — The Pilot Plant for Explosive Formulation supports the development of new explosives that are comprised of several components. This system is particularly beneficial...

  19. Underground Explosions

    Science.gov (United States)

    2015-09-09

    is viewed as a result of the propulsion of broken rock mass by explosion gas by-products. The physical model used to recreate the second and the third...period seismographs. Seismologists of the                                                              5  Edinaya  Sistema   Seismicheskih  Nablyudenii...d’explosifs chiniques dans le sable: Programme Dynasol, Centre d’etudes Nucl. De Grenoble Lab. D’applications Speciales de la Physique, Grenoble. 9

  20. Chemical profiling of explosives

    NARCIS (Netherlands)

    Brust, G.M.H.

    2014-01-01

    The primary goal of this thesis is to develop analytical methods for the chemical profiling of explosives. Current methodologies for the forensic analysis of explosives focus on identification of the explosive material. However, chemical profiling of explosives becomes increasingly important, as

  1. Supernova explosions

    CERN Document Server

    Branch, David

    2017-01-01

    Targeting advanced students of astronomy and physics, as well as astronomers and physicists contemplating research on supernovae or related fields, David Branch and J. Craig Wheeler offer a modern account of the nature, causes and consequences of supernovae, as well as of issues that remain to be resolved. Owing especially to (1) the appearance of supernova 1987A in the nearby Large Magellanic Cloud, (2) the spectacularly successful use of supernovae as distance indicators for cosmology, (3) the association of some supernovae with the enigmatic cosmic gamma-ray bursts, and (4) the discovery of a class of superluminous supernovae, the pace of supernova research has been increasing sharply. This monograph serves as a broad survey of modern supernova research and a guide to the current literature. The book’s emphasis is on the explosive phases of supernovae. Part 1 is devoted to a survey of the kinds of observations that inform us about supernovae, some basic interpreta tions of such data, and an overview of t...

  2. Causes and consequences of range size variation: the influence of traits, speciation, and extinction

    Directory of Open Access Journals (Sweden)

    Steven M. Vamosi

    2012-12-01

    Full Text Available The tremendous variation in species richness observed among related clades across the tree of life has long caught the imagination of biologists. Recently, there has been growing attention paid to the possible contribution of range size variation, either alone or in combination with putative key innovations, to these patterns. Here, we review three related topics relevant to range size evolution, speciation, and extinction. First, we provide a brief overview of the debate surrounding patterns and mechanisms for phylogenetic signal in range size. Second, we discuss some recent findings regarding the joint influence of traits and range size on diversification. Finally, we present the preliminary results of a study investigating whether range size is negatively correlated with contemporary extinction risk in flowering plants.

  3. Understanding vented gas explosions

    Energy Technology Data Exchange (ETDEWEB)

    Lautkaski, R. [VTT Energy, Espoo (Finland). Energy Systems

    1997-12-31

    The report is an introduction to vented gas explosions for nonspecialists, particularly designers of plants for flammable gases and liquids. The phenomena leading to pressure generation in vented gas explosions in empty and congested rooms are reviewed. The four peak model of vented gas explosions is presented with simple methods to predict the values of the individual peaks. Experimental data on the external explosion of dust and gas explosions is discussed. The empirical equation relating the internal and external peak pressures in vented dust explosions is shown to be valid for gas explosion tests in 30 m{sup 3} and 550 m{sup 3} chambers. However, the difficulty of predicting the internal peak pressure in large chambers remains. Methods of explosion relief panel design and principles of vent and equipment layout to reduce explosion overpressures are reviewed. (orig.) 65 refs.

  4. Inspection tester for explosives

    Science.gov (United States)

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2007-11-13

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  5. 75 FR 5545 - Explosives

    Science.gov (United States)

    2010-02-03

    ... for classifying, labeling, and providing safety data sheets for explosives. By withdrawing this.... OSHA-S031-2006-0665 and OSHA-S-031)] RIN 1218-AC09 Explosives AGENCY: Occupational Safety and Health... the rulemaking to amend its Explosives and Blasting Agents Standard at 29 CFR 1910.109. OSHA is taking...

  6. The ecological genetics of homoploid hybrid speciation

    National Research Council Canada - National Science Library

    Gross, B L; Rieseberg, L H

    2005-01-01

    ... a major role as well. In light of this recent shift, we present an evaluation of ecology's role in homoploid hybrid speciation, with an emphasis on the genetics underlying ecological components of the speciation process...

  7. Speciation through sensory drive in cichlid fish

    NARCIS (Netherlands)

    Seehausen, Ole; Terai, Yohey; Magalhaes, Isabel S.; Carleton, Karen L.; Mrosso, Hillary D. J.; Miyagi, Ryutaro; van der Sluijs, Inke; Schneider, Maria V.; Maan, Martine E.; Tachida, Hidenori; Imai, Hiroo; Okada, Norihiro

    2008-01-01

    Theoretically, divergent selection on sensory systems can cause speciation through sensory drive. However, empirical evidence is rare and incomplete. Here we demonstrate sensory drive speciation within island populations of cichlid fish. We identify the ecological and molecular basis of divergent

  8. New Mix Explosives for Explosive Welding

    Science.gov (United States)

    Andreevskikh, Leonid

    2011-06-01

    Suggested and tested were some mix explosives--powder mixtures of a brisant high explosive (HE = RDX, PETN) and an inert diluent (baking soda)--for use in explosive welding. RDX and PETN were selected in view of their high throwing ability and low critical diameter. Since the decomposition of baking soda yields a huge amount of gaseous products, its presence ensures (even at a low HE percentage) a throwing speed that is sufficient for realization of explosive welding, at a reduced brisant action of charge. Mix chargers containing 30-70 wt % HE (the rest baking soda) have been tested experimentally and optimized. For study of possibility to reduce critical diameter of HE mixture, the mixture was prepared where HE crystal sizes did not exceed 10 μm. The tests, which were performed with this HE, revealed that the mixture detonated stably with the velocity D ~ 2 km/s, if the layer thickness was d = 2 mm. The above explosives afford to markedly diminish deformations within the oblique impact zone and thus to carry out explosive welding of hollow items and thin metallic foils.

  9. Explosives tester with heater

    Science.gov (United States)

    Del Eckels, Joel [Livermore, CA; Nunes, Peter J [Danville, CA; Simpson, Randall L [Livermore, CA; Whipple, Richard E [Livermore, CA; Carter, J Chance [Livermore, CA; Reynolds, John G [San Ramon, CA

    2010-08-10

    An inspection tester system for testing for explosives. The tester includes a body and a swab unit adapted to be removeably connected to the body. At least one reagent holder and dispenser is operatively connected to the body. The reagent holder and dispenser contains an explosives detecting reagent and is positioned to deliver the explosives detecting reagent to the swab unit. A heater is operatively connected to the body and the swab unit is adapted to be operatively connected to the heater.

  10. Explosive Technology Group

    Data.gov (United States)

    Federal Laboratory Consortium — The Explosive Technology Group (ETG) provides diverse technical expertise and an agile, integrated approach to solve complex challenges for all classes of energetic...

  11. Sensory drive in cichlid speciation

    NARCIS (Netherlands)

    Maan, Martine E.; Hofker, Kees D.; van Alphen, Jacques J. M.; Seehausen, Ole

    The role of selection in speciation is a central yet poorly understood problem in evolutionary biology. The rapid radiations of extremely colorful cichlid fish in African lakes have fueled the hypothesis that sexual selection can drive species divergence without geographical isolation. Here we

  12. Active explosion barrier performance against methane and coal dust explosions

    National Research Council Canada - National Science Library

    J. J. L. du Plessis

    2015-01-01

    Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines...

  13. Explosions and static electricity

    DEFF Research Database (Denmark)

    Jonassen, Niels M

    1995-01-01

    The paper deals with the problem of electrostatic discharges as causes of ignition of vapor/gas and dust/gas mixtures. A series of examples of static-caused explosions will be discussed. The concepts of explosion limits, the incendiveness of various discharge types and safe voltages are explained...

  14. Cell phone explosion.

    Science.gov (United States)

    Atreya, Alok; Kanchan, Tanuj; Nepal, Samata; Pandey, Bhuwan Raj

    2016-03-01

    Cell phone explosions and resultant burn injuries are rarely reported in the scientific literature. We report a case of cell phone explosion that occurred when a young male was listening to music while the mobile was plugged in for charging. © The Author(s) 2015.

  15. Steam explosion studies review

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Moon Kyu; Kim, Hee Dong

    1999-03-01

    When a cold liquid is brought into contact with a molten material with a temperature significantly higher than the liquid boiling point, an explosive interaction due to sudden fragmentation of the melt and rapid evaporation of the liquid may take place. This phenomenon is referred to as a steam explosion or vapor explosion. Depending upon the amount of the melt and the liquid involved, the mechanical energy released during a vapor explosion can be large enough to cause serious destruction. In hypothetical severe accidents which involve fuel melt down, subsequent interactions between the molten fuel and coolant may cause steam explosion. This process has been studied by many investigators in an effort to assess the likelihood of containment failure which leads to large scale release of radioactive materials to the environment. In an effort to understand the phenomenology of steam explosion, extensive studies has been performed so far. The report presents both experimental and analytical studies on steam explosion. As for the experimental studies, both small scale tests which involve usually less than 20 g of high temperature melt and medium/large scale tests which more than 1 kg of melt is used are reviewed. For the modelling part of steam explosions, mechanistic modelling as well as thermodynamic modelling is reviewed. (author)

  16. Melt Cast High Explosives

    Directory of Open Access Journals (Sweden)

    Stanisław Cudziło

    2014-12-01

    Full Text Available [b]Abstract[/b]. This paper reviews the current state and future developments of melt-cast high explosives. First the compositions, properties and methods of preparation of trinitrotoluene based (TNT conventional mixtures with aluminum, hexogen (RDX or octogen (HMX are described. In the newer, less sensitive explosive formulations, TNT is replaced with dinitroanisole (DNANDNANDNAN and nitrotriazolone (NTONTONTO, nitroguanidine (NG or ammonium perchlorate (AP are the replacement for RDRDX and HMX. Plasticized wax or polymer-based binder systems for melt castable explosives are also included. Hydroxyl terminated polybutadiene (HPTB is the binder of choice, but polyethylene glycol, and polycaprolactone with energetic plasticizers are also used. The most advanced melt-cast explosives are compositions containing energetic thermoplastic elastomers and novel highly energetic compounds (including nitrogen rich molecules in whose particles are nanosized and practically defect-less.[b]Keywords[/b]: melt-cast explosives, detonation parameters

  17. Chemical explosive stimulation

    Energy Technology Data Exchange (ETDEWEB)

    LaRocca, S.J.; McLamore, R.T.; Spencer, A.M. Jr.

    1974-02-01

    A safe, reliable chemical explosive fracturing process has been demonstrated and prototype equipment for its use has been successfully field tested.Called the Astro-Flow II process, it utilizes a highly energetic, hydrazine-based family of liquid explosives known as Astrolite. A unique property of these explosives is that they can be divided into 2 nonexplosive pumpable components that can be handled safely. The 2 components are pumped independently and simultaneously into the well and blended together downhole to form the explosive which is circulated in place or displaced into formation fractures. Explosive hazards to surface equipment and personnel are eliminated. Extensive testing of the physical and chemical stability of the mixed explosive indicates that the material can be reliable and safely used at elevated temperatures, pressures, and in the adverse chemical environment often found in deep oil and gas wells. These tests of prototype equipment proved that the 2 components could be independently pumped with precision and blended together to form the desired explosive formulation. How the process works is described.

  18. Speciation Analysis of Radionuclides in the Environment - NSK-B SPECIATION project report 2009

    DEFF Research Database (Denmark)

    Hou, Xiaolin; Aldahan, Ala; Possnert, Göran

    The second stage of the NKS-B project SPECIATION was complemented in 2008-2009, which mainly focus on three aspects: (1) Further improvement and development of methods for speciation analysis of radionuclides; (2) Investigation of speciation of some radionuclides in the environment (water......, sediments, particles); and (3) Intercomparison excise for speciation analysis of radionu-clides in soil and sediment. This report summarizes the work completed in the project partners’ laboratories, Method developments include: Development of an rapid and in-suit separation method for the speciation...... analysis of 129I in seawater samples; Development of a simple method for the speciation analysis of 129I in fresh water and seawater samples; Development of an on-line HPLC-ICP-MS method for the direct speciation analysis of 127I in water and leachate samples; Speciation of radionuclides in water includes...

  19. Meiosis and speciation: a study in a speciating Mus terricolor complex

    Indian Academy of Sciences (India)

    Unknown

    2000-12-27

    –679. Museum of Comparative Zoology,. Cambridge. King M. 1981 Chromosome change and speciation in lizards. In Evolution and speciation (ed. W. R. Atchley and D. S.. Woodruff), pp. 262–285. Cambridge University Press ...

  20. Arsenic speciation in solids using X-ray absorption spectroscopy

    Science.gov (United States)

    Foster, Andrea L.; Kim, Chris S.

    2014-01-01

    Synchrotron-based X-ray absorption spectroscopy (XAS) is an in situ, minimally-destructive, element-specific, molecular-scale structural probe that has been employed to study the chemical forms (species) of arsenic (As) in solid and aqueous phases (including rocks, soils, sediment, synthetic compounds, and numerous types of biota including humans) for more than 20 years. Although several excellent reviews of As geochemistry and As speciation in the environment have been published previously (including recent contributions in this volume), the explosion of As-XAS studies over the past decade (especially studies employing microfocused X-ray beams) warrants this new review of the literature and of data analysis methods.

  1. ENVIRONMENTAL TOXICOLOGY OF EXPLOSIVES

    OpenAIRE

    KOYUNCU, Hülya

    2017-01-01

    Explosives are used on a large scale byboth the military and by various civilian industries (e.g. mining, high-energymetalwork, and civil engineering). Explosives utilization contributes to the high environmentalcontamination. TNT(2,4,6-trinitrotoluene), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) are found mainly in soils and surface waters; there havealso been cases of groundwater contamination. Most explosives are stable du...

  2. Multivariate sexual selection in a rapidly evolving speciation phenotype.

    Science.gov (United States)

    Oh, Kevin P; Shaw, Kerry L

    2013-06-22

    Estimating the fitness surface of rapidly evolving secondary sexual traits can elucidate the origins of sexual isolation and thus speciation. Evidence suggests that sexual selection is highly complex in nature, often acting on multivariate sexual characters that sometimes include non-heritable components of variation, thus presenting a challenge for predicting patterns of sexual trait evolution. Laupala crickets have undergone an explosive species radiation marked by divergence in male courtship song and associated female preferences, yet patterns of sexual selection that might explain this diversification remain unknown. We used female phonotaxis trials to estimate the fitness surface for acoustic characters within one population of Laupala cerasina, a species with marked geographical variation in male song and female preferences. Results suggested significant directional sexual selection on three major song traits, while canonical rotation of the matrix of nonlinear selection coefficients (γ) revealed the presence of significant convex (stabilizing) sexual selection along combinations of characters. Analysis of song variation within and among males indicated significantly higher repeatability along the canonical axis of greatest stabilizing selection than along the axis of greatest linear selection. These results are largely consistent with patterns of song divergence that characterize speciation and suggest that different song characters have the potential to indicate distinct information to females during courtship.

  3. Speciation of Pb in industrially polluted soils

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Ottosen, Lisbeth M.; Pedersen, Anne Juul

    2006-01-01

    This study was aimed at elucidating the importance of original Pb-speciation versus soil-characteristics to mobility and distribution of Pb in industrially polluted soils. Ten industrially polluted Danish surface soils were characterized and Pb speciation was evaluated through SEM-EDX studies......, examination of pH-dependent desorption, distribution in grain-size fractions and sequential extraction. Our results show that the first factors determining the speciation of Pb in soil are: (1) the stability of the original speciation and (2) the contamination level, while soil characteristics...

  4. Aging of civil explosives (Poster)

    NARCIS (Netherlands)

    Krabbendam-La Haye, E.L.M.; Klerk, W.P.C. de; Hoen, C. 't; Krämer, R.E.

    2014-01-01

    For the Dutch MoD and police, TNO composed sets with different kinds of civil explosives to train their detection dogs. The manufacturer of these explosives guarantees several years of stability of these explosives. These sets of explosives are used under different conditions, like temperature and

  5. Shock waves & explosions

    CERN Document Server

    Sachdev, PL

    2004-01-01

    Understanding the causes and effects of explosions is important to experts in a broad range of disciplines, including the military, industrial and environmental research, aeronautic engineering, and applied mathematics. Offering an introductory review of historic research, Shock Waves and Explosions brings analytic and computational methods to a wide audience in a clear and thorough way. Beginning with an overview of the research on combustion and gas dynamics in the 1970s and 1980s, the author brings you up to date by covering modeling techniques and asymptotic and perturbative methods and ending with a chapter on computational methods.Most of the book deals with the mathematical analysis of explosions, but computational results are also included wherever they are available. Historical perspectives are provided on the advent of nonlinear science, as well as on the mathematical study of the blast wave phenomenon, both when visualized as a point explosion and when simulated as the expansion of a high-pressure ...

  6. Explosive Components Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 98,000 square foot Explosive Components Facility (ECF) is a state-of-the-art facility that provides a full-range of chemical, material, and performance analysis...

  7. Intermittent Explosive Disorder

    Science.gov (United States)

    ... Headache Intermittent explosive disorder Symptoms & causes Diagnosis & treatment Advertisement Mayo Clinic does not endorse companies or products. ... a Job Site Map About This Site Twitter Facebook Google YouTube Pinterest Mayo Clinic is a not- ...

  8. Parametric Explosion Spectral Model

    Energy Technology Data Exchange (ETDEWEB)

    Ford, S R; Walter, W R

    2012-01-19

    Small underground nuclear explosions need to be confidently detected, identified, and characterized in regions of the world where they have never before occurred. We develop a parametric model of the nuclear explosion seismic source spectrum derived from regional phases that is compatible with earthquake-based geometrical spreading and attenuation. Earthquake spectra are fit with a generalized version of the Brune spectrum, which is a three-parameter model that describes the long-period level, corner-frequency, and spectral slope at high-frequencies. Explosion spectra can be fit with similar spectral models whose parameters are then correlated with near-source geology and containment conditions. We observe a correlation of high gas-porosity (low-strength) with increased spectral slope. The relationship between the parametric equations and the geologic and containment conditions will assist in our physical understanding of the nuclear explosion source.

  9. Ammonium nitrate explosion hazards

    Directory of Open Access Journals (Sweden)

    Negovanović Milanka

    2015-01-01

    Full Text Available Ammonium nitrate (AN primarily is used as a fertilizer but it is also very important compound in the production of industrial explosives. The application of ammonium nitrate in the production of industrial explosives was related with the early era of Nobel dynamite and widely increased with the appearance of blasting agents such as ANFO and Slurry, in the middle of the last Century. Throughout the world millions of tons of ammonium nitrate are produced annually and handled without incident. Although ammonium nitrate generally is used safely, accidental explosions involving AN have high impact resulting in loss of lives and destruction of property. The paper presents the basic properties of ammonium nitrate as well as hazards in handling of ammonium nitrate in order to prevent accidents. Several accidents with explosions of ammonium nitrate resulted in catastrophic consequences are listed in the paper as examples of non-compliance with prescribed procedures.

  10. Intermittent Explosive Disorder

    Directory of Open Access Journals (Sweden)

    Lut Tamam

    2011-09-01

    Full Text Available Intermittent explosive disorder is an impulse control disorder characterized by the occurrence of discrete episodes of failure to resist aggressive impulses that result in violent assault or destruction of property. Though the prevalence intermittent explosive disorder has been reported to be relatively rare in frontier studies on the field, it is now common opinion that intermittent explosive disorder is far more common than previously thought especially in clinical psychiatry settings. Etiological studies displayed the role of both psychosocial factors like childhood traumas and biological factors like dysfunctional neurotransmitter systems and genetics. In differential diagnosis of the disorder, disorders involving agression as a symptom such as alcohol and drug intoxication, antisocial and borderline personality disorders, personality changes due to general medical conditions and behavioral disorder should be considered. A combination of pharmacological and psychotherapeutic approaches are suggested in the treatment of the disorder. This article briefly reviews the historical background, diagnostic criteria, epidemiology, etiology and treatment of intermittent explosive disorder.

  11. Modeling nuclear explosion

    Science.gov (United States)

    Redd, Jeremy; Panin, Alexander

    2012-10-01

    As a result of the Nuclear Test Ban Treaty, no nuclear explosion tests have been performed by the US since 1992. This appreciably limits valuable experimental data needed for improvement of existing weapons and development of new ones, as well as for use of nuclear devices in non-military applications (such as making underground oil reservoirs or compressed air energy storages). This in turn increases the value of numerical modeling of nuclear explosions and of their effects on the environment. We develop numerical codes simulating fission chain reactions in a supercritical U and Pu core and the dynamics of the subsequent expansion of generated hot plasma in order to better understand the impact of such explosions on their surroundings. The results of our simulations (of both above ground and underground explosions) of various energy yields are presented.

  12. Explosion suppression system

    Science.gov (United States)

    Sapko, Michael J.; Cortese, Robert A.

    1992-01-01

    An explosion suppression system and triggering apparatus therefor are provided for quenching gas and dust explosions. An electrically actuated suppression mechanism which dispenses an extinguishing agent into the path ahead of the propagating flame is actuated by a triggering device which is light powered. This triggering device is located upstream of the propagating flame and converts light from the flame to an electrical actuation signal. A pressure arming device electrically connects the triggering device to the suppression device only when the explosion is sensed by a further characteristic thereof beside the flame such as the pioneer pressure wave. The light powered triggering device includes a solar panel which is disposed in the path of the explosion and oriented between horizontally downward and vertical. Testing mechanisms are also preferably provided to test the operation of the solar panel and detonator as well as the pressure arming mechanism.

  13. Polymeric binder for explosives

    Science.gov (United States)

    Bissell, E. R.

    1972-01-01

    Chemical reaction for producing a polymer which can be mixed with explosives to produce a rigid material is discussed. Physical and chemical properties of polymers are described and chemical structure of the polymer is illustrated.

  14. Arsenic speciation in edible mushrooms.

    Science.gov (United States)

    Nearing, Michelle M; Koch, Iris; Reimer, Kenneth J

    2014-12-16

    The fruiting bodies, or mushrooms, of terrestrial fungi have been found to contain a high proportion of the nontoxic arsenic compound arsenobetaine (AB), but data gaps include a limited phylogenetic diversity of the fungi for which arsenic speciation is available, a focus on mushrooms with higher total arsenic concentrations, and the unknown formation and role of AB in mushrooms. To address these, the mushrooms of 46 different fungus species (73 samples) over a diverse range of phylogenetic groups were collected from Canadian grocery stores and background and arsenic-contaminated areas. Total arsenic was determined using ICP-MS, and arsenic speciation was determined using HPLC-ICP-MS and complementary X-ray absorption spectroscopy (XAS). The major arsenic compounds in mushrooms were found to be similar among phylogenetic groups, and AB was found to be the major compound in the Lycoperdaceae and Agaricaceae families but generally absent in log-growing mushrooms, suggesting the microbial community may influence arsenic speciation in mushrooms. The high proportion of AB in mushrooms with puffball or gilled morphologies may suggest that AB acts as an osmolyte in certain mushrooms to help maintain fruiting body structure. The presence of an As(III)-sulfur compound, for the first time in mushrooms, was identified in the XAS analysis. Except for Agaricus sp. (with predominantly AB), inorganic arsenic predominated in most of the store-bought mushrooms (albeit with low total arsenic concentrations). Should inorganic arsenic predominate in these mushrooms from contaminated areas, the risk to consumers under these circumstances should be considered.

  15. Estimating the duration of speciation from phylogenies

    NARCIS (Netherlands)

    Etienne, Rampal S.; Morlon, Helene; Lambert, Amaury

    Speciation is not instantaneous but takes time. The protracted birth-death diversification model incorporates this fact and predicts the often observed slowdown of lineage accumulation toward the present. The mathematical complexity of the protracted speciation model has barred estimation of its

  16. Adaptive speciation theory : A conceptual review

    NARCIS (Netherlands)

    Weissing, Franz J.; Edelaar, Pim; van Doorn, G. Sander

    Speciation-the origin of new species-is the source of the diversity of life. A theory of speciation is essential to link poorly understood macro-evolutionary processes, such as the origin of biodiversity and adaptive radiation, to well understood micro-evolutionary processes, such as allele

  17. A tipping point in parapatric speciation.

    Science.gov (United States)

    Yamaguchi, Ryo; Iwasa, Yoh

    2017-05-21

    More than two loci are involved in reproductive isolation in most cases of putative recent speciation. We study the speciation between two geographically isolated populations connected by infrequent migration, in which incompatibility is controlled by quantitative loci. Incompatibility genetic distance is defined as the fraction of compatibility controlling loci that are different between individuals. Speciation is established when genetic distance reaches a threshold level in spite of occasional migration and subsequent hybridization that reduce genetic distance. With stochastic analysis, we investigate how the time to speciation depends on the manner in which the magnitude of incompatibility increases with genetic distance. Results are: (1) The time to speciation is short if the migration rate is smaller than the mutation rate, or if intermediate levels of genetic distance cause mild incompatibility, making migrants less effective in reducing genetic distance. (2) Genetic distance may fluctuate around a positive quasi-equilibrium level for a long time, and suddenly show a quick passage to speciation when it goes beyond a "tipping point." Notably a gradual increase in incompatibility can result in a sudden and rapid formation of a new species. (3) Speciation becomes very slow if incompatibility is effective for individuals differing at only one locus. These findings provide testable predictions on reproductive traits controlled by specific incompatibility accumulation forms that facilitate the speciation process. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Speciation of heavy metals in River Rhine

    NARCIS (Netherlands)

    Vega, F.A.; Weng, L.

    2013-01-01

    Chemical speciation of Zn, Cu, Ni, Cd and Pb in River Rhine was studied by measuring free ion concentration and distribution in nanoparticles, and by comparing the measurement with speciation modeling. Concentrations of free metal ions were determined in situ using Donnan Membrane Technique (DMT).

  19. Advances in Ecological Speciation: an integrative approach.

    Science.gov (United States)

    Faria, Rui; Renaut, Sebastien; Galindo, Juan; Pinho, Catarina; Melo-Ferreira, José; Melo, Martim; Jones, Felicity; Salzburger, Walter; Schluter, Dolph; Butlin, Roger

    2014-02-01

    The role of natural selection in promoting reproductive isolation has received substantial renewed interest within the last two decades. As a consequence, the study of ecological speciation has become an extremely productive research area in modern evolutionary biology. Recent innovations in sequencing technologies offer an unprecedented opportunity to study the mechanisms involved in ecological speciation. Genome scans provide significant insights but have some important limitations; efforts are needed to integrate them with other approaches to make full use of the sequencing data deluge. An international conference 'Advances in Ecological Speciation' organized by the University of Porto (Portugal) aimed to review current progress in ecological speciation. Using some of the examples presented at the conference, we highlight the benefits of integrating ecological and genomic data and discuss different mechanisms of parallel evolution. Finally, future avenues of research are suggested to advance our knowledge concerning the role of natural selection in the establishment of reproductive isolation during ecological speciation. © 2013 John Wiley & Sons Ltd.

  20. A two-locus model of speciation.

    Science.gov (United States)

    Gregorius, H R

    1992-02-07

    Speciation is considered as the evolution of partial or complete cross-incompatibility between the carriers of genes (at a locus called "object locus") that distinguish the prospective species populations. The mating relations at the object locus are modified by the alleles at a second mating modifier locus. Based on a widely applicable concept of fitness and mating preference, it is shown that heterozygote disadvantage in fitness at the object locus is necessary for speciation, which corroborates Wallace's hypothesis. It is pointed out that the difference between sympatric and parapatric speciation essentially lies in the mechanisms stabilizing the polymorphism required at the object locus as a prerequisite for speciation. In the presence of recombination between the object and mating modifier locus speciation may be prevented by forces maintaining gametic phase imbalance between these loci such as can result from unidirectional gene flow between parapatric populations.

  1. Rapid parapatric speciation on holey adaptive landscapes

    CERN Document Server

    Gavrilets, S; Vose, M D; Gavrilets, Sergey; Li, Hai; Vose, Michael D.

    1998-01-01

    A classical view of speciation is that reproductive isolation arises as a by-product of genetic divergence. Here, individual-based simulations are used to evaluate whether the mechanisms implied by this view may result in rapid speciation if the only source of genetic divergence are mutation and random genetic drift. Distinctive features of the simulations are the consideration of the complete process of speciation (from initiation until completion), and of a large number of loci, which was only one order of magnitude smaller than that of bacteria. It is demonstrated that rapid speciation on the time scale of hundreds of generations is plausible without the need for extreme founder events, complete geographic isolation, the existence of distinct adaptive peaks or selection for local adaptation. The plausibility of speciation is enhanced by population subdivision. Simultaneous emergence of more than two new species from a subdivided population is highly probable. Numerical examples relevant to the theory of ce...

  2. Explosion containment device

    Science.gov (United States)

    Benedick, William B.; Daniel, Charles J.

    1977-01-01

    The disclosure relates to an explosives storage container for absorbing and containing the blast, fragments and detonation products from a possible detonation of a contained explosive. The container comprises a layer of distended material having sufficient thickness to convert a portion of the kinetic energy of the explosion into thermal energy therein. A continuous wall of steel sufficiently thick to absorb most of the remaining kinetic energy by stretching and expanding, thereby reducing the momentum of detonation products and high velocity fragments, surrounds the layer of distended material. A crushable layer surrounds the continuous steel wall and accommodates the stretching and expanding thereof, transmitting a moderate load to the outer enclosure. These layers reduce the forces of the explosion and the momentum of the products thereof to zero. The outer enclosure comprises a continuous pressure wall enclosing all of the layers. In one embodiment, detonation of the contained explosive causes the outer enclosure to expand which indicates to a visual observer that a detonation has occurred.

  3. Surface explosion cavities

    CERN Document Server

    Benusiglio, Adrien; Clanet, Christophe

    2012-01-01

    We present a fluid dynamics video on cavities created by explosions of firecrackers at the water free surface. We use three types of firecrackers containing 1, 1.3 and 5 g of flash powder. The firecrackers are held with their center at the surface of water in a cubic meter pool. The movies are recorded from the side with a high-speed video camera. Without confinement the explosion produces an hemispherical cavity. Right after the explosion this cavity grows isotropically, the bottom then stops while the sides continue to expand. In the next phase the bottom of the cavity accelerates backwards to the surface. During this phase the convergence of the flow creates a central jet that rises above the free surface. In the last part of the video the explosion is confined in a vertical open tube made of glass and of centimetric diameter. The explosion creates a cylindrical cavity that develops towards the free end of the tube. Depending on the charge, the cavity can either stop inside the tube or at its exit, but nev...

  4. Actinide speciation in environmental remediation

    Energy Technology Data Exchange (ETDEWEB)

    Plaue, Jon; Czerwinski, Ken R. [Massachusetts Institute of Technology, Nuclear Engineering Dept., Cambridge, MA (United States)

    2002-11-01

    Environmental actinide remediation is often performed in the absence of a clear understanding of the contaminant chemical forms. Remediation efforts are more concerned with the initial and final concentration of the contaminant actinides. Allowable final concentrations of actinides in remediation sites are mainly based on expected dose or prenegotiated levels. However, understanding the chemical forms of actinides in the environment is key to assessing their long-term behavior and developing enhanced analytical methods for their environmental detection. The dominant environmental chemical form will dictate the actinide transport behavior through solubility, colloid formation, or the interaction with natural ligands. This information can be used to evaluate the fate and potential transport of actinides. If the dominant environmental chemical species are understood, analytical methods for enhanced counting statistics and a reduction of counting error can be developed. A reduction in counting error will increase the fraction of verifiable waste below a given threshold, thereby increasing the rate of site clean up while reducing the cost. The impact of actinide speciation is presented in 2 sites contaminated with Am and Pu undergoing remediation. Actinide speciation has affected remediation strategies, regulatory response, and costs. (author)

  5. Speciation analysis of radionuclides in the environment. NKS-B speciation project report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Xiaolin Hou (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy, Roskilde (Denmark)); Aldahan, A. (Uppsala Univ., Dept. of Earth Science, Uppsala (Sweden)); Possnert, G. (Uppsala Univ., Tandem Lab., Uppsala (Sweden)); Lujaniene, G. (Institute of Physics, Vilnius (Lithuania)); Lehto, J. (Univ. of Helsinki, Dept. of Chemistry, Helsinki (Finland)); Salbu, B. (Norwegian Univ. of Life Sciences (UMB), AAs (Norway))

    2008-07-15

    This report describes the work carried out under the NUK-B project SPECIATION 2007. In 2007, the project partners had two meeting in April and November, organized a NUK seminar on speciation and hot particles. SPECIATION 2007 t mainly focused on two issues on speciation (1) further development of speciation methods for radionuclides, and (2) investigation of speciation of radionuclides in environment. The report summarized the work done in partners labs, which includes: (1) Further development on the speciation of 129I and 127I in water samples; (2) Speciation method for 129I and 127I in air; (3) Dynamic system for fractionation of Pu and Am in soil and sediment; (4) Investigation on Re-absorption of Pu during the fractionation of Pu in soil and sediment; (5) Speciation of 129I in North Sea surface water; (6) Partition of 137Cs and 129I in the Nordic lake sediment, pore-water and lake water; (7) Sequential extraction of Pu in soil, sediment and concrete samples, (8) Pu sorption to Mn and Fe oxides in the geological materials, (10) Investigation of the adsorbed species of lanthanides and actinides on clays surfaces. In addition, two review articles on the speciation of plutonium and iodine in environmental are planned to be submitted to an international journal for publication. (au)

  6. 78 FR 64246 - Commerce in Explosives; List of Explosives Materials

    Science.gov (United States)

    2013-10-28

    ... hydrocarbons. Explosive organic nitrate mixtures. Explosive powders. F Flash powder. ] Fulminate of mercury. Fulminate of silver. Fulminating gold. Fulminating mercury. Fulminating platinum. Fulminating silver. G... fulminate. Mercury oxalate. Mercury tartrate. Metriol trinitrate. Minol-2 . MMAN ; methylamine nitrate...

  7. Tipping points in the dynamics of speciation.

    Science.gov (United States)

    Nosil, Patrik; Feder, Jeffrey L; Flaxman, Samuel M; Gompert, Zachariah

    2017-01-24

    Speciation can be gradual or sudden and involve few or many genetic changes. Inferring the processes generating such patterns is difficult, and may require consideration of emergent and non-linear properties of speciation, such as when small changes at tipping points have large effects on differentiation. Tipping points involve positive feedback and indirect selection stemming from associations between genomic regions, bi-stability due to effects of initial conditions and evolutionary history, and dependence on modularity of system components. These features are associated with sudden 'regime shifts' in other cellular, ecological, and societal systems. Thus, tools used to understand other complex systems could be fruitfully applied in speciation research.

  8. Speciation gradients and the distribution of biodiversity.

    Science.gov (United States)

    Schluter, Dolph; Pennell, Matthew W

    2017-05-31

    Global patterns of biodiversity are influenced by spatial and environmental variations in the rate at which new species form. We relate variations in speciation rates to six key patterns of biodiversity worldwide, including the species-area relationship, latitudinal gradients in species and genetic diversity, and between-habitat differences in species richness. Although they sometimes mirror biodiversity patterns, recent rates of speciation, at the tip of the tree of life, are often highest where species richness is low. Speciation gradients therefore shape, but are also shaped by, biodiversity gradients and are often more useful for predicting future patterns of biodiversity than for interpreting the past.

  9. Speciation analysis of radionuclides in the environment - NSK-B SPECIATION project report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Hou, X. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy, Roskilde (Denmark)); Aldahan, A. (Uppsala Univ., Dept. of Earth Science (Sweden)); Possnert, G. (Uppsala Univ., Tandem Lab. (Sweden)); Lujaniene, G. (Univ. of Helsinki, Lab. of Radiochemistry (Finland)); Lehto, J. (Institute of Physics (Lithuania)); Skipperud, L.; Lind, O.C.; Salbu, B. (Norwegian Univ. of Life Sciences, Isotope Lab., AAs (Norway))

    2009-10-15

    The second stage of the NKS-B project SPECIATION was complemented in 2008-2009, which mainly focus on three aspects: (1) Further improvement and development of methods for speciation analysis of radionuclides; (2) Investigation of speciation of some radionuclides in the environment (water, sediments, particles); and (3) Intercomparison excise for speciation analysis of radionuclides in soil and sediment. This report summarizes the work completed in the project partners' laboratories. Method developments include: Development of an rapid and in-suit separation method for the speciation analysis of 129I in seawater samples; Development of a simple method for the speciation analysis of 129I in fresh water and seawater samples; Development of an on-line HPLC-ICP-MS method for the direct speciation analysis of 127I in water and leachate samples; Speciation of radionuclides in water includes: Speciation of 129I and 127I in time-series precipitation samples collected in Denmark 2001-2006 and its application for the investigation of geochemistry and atmospheric chemistry of iodine, Speciation of radionuclides in Ob and Yenisey Rivers, and Speciation of 129I and 127I in Lake Heimdalen water. Speciation of radionuclides in soils and sediments includes: Sequential extraction of radionuclides in sediments and of trace elements in soil samples. Sequential extraction of radionuclides in aerosols and particles has also been performed. Furthermore, sorption experiments have been performed to investigate the association of Pu, Am and Cs with different geological materials. The intercomparison exercises included sequential extraction of Pu, 137Cs, U, Th, and 129I in one soil and one sediment standard reference materials (NIST-4354, IAEA-375) and Pu in sediment collected from the Lake Heimdalen, Norway. (author)

  10. XIT Commercial Explosives Identification Tool

    Science.gov (United States)

    2014-05-01

    Explosives Identification Tool (XIT) was supported by the Canadian Safety and Security Program ( CSSP ) which is led by Defence Research and Development...Explosives Training Unit, and Toronto Police Service, Explosives Disposal Unit. CSSP is a federally-funded program to strengthen Canada’s ability to

  11. Explosive detection technology

    Science.gov (United States)

    Doremus, Steven; Crownover, Robin

    2017-05-01

    The continuing proliferation of improvised explosive devices is an omnipresent threat to civilians and members of military and law enforcement around the world. The ability to accurately and quickly detect explosive materials from a distance would be an extremely valuable tool for mitigating the risk posed by these devices. A variety of techniques exist that are capable of accurately identifying explosive compounds, but an effective standoff technique is still yet to be realized. Most of the methods being investigated to fill this gap in capabilities are laser based. Raman spectroscopy is one such technique that has been demonstrated to be effective at a distance. Spatially Offset Raman Spectroscopy (SORS) is a technique capable of identifying chemical compounds inside of containers, which could be used to detect hidden explosive devices. Coherent Anti-Stokes Raman Spectroscopy (CARS) utilized a coherent pair of lasers to excite a sample, greatly increasing the response of sample while decreasing the strength of the lasers being used, which significantly improves the eye safety issue that typically hinders laser-based detection methods. Time-gating techniques are also being developed to improve the data collection from Raman techniques, which are often hindered fluorescence of the test sample in addition to atmospheric, substrate, and contaminant responses. Ultraviolet based techniques have also shown significant promise by greatly improved signal strength from excitation of resonance in many explosive compounds. Raman spectroscopy, which identifies compounds based on their molecular response, can be coupled with Laser Induced Breakdown Spectroscopy (LIBS) capable of characterizing the sample's atomic composition using a single laser.

  12. Evolution: sympatric speciation the eusocial way

    DEFF Research Database (Denmark)

    Boomsma, Jacobus Jan; Nash, David Richard

    2014-01-01

    Sympatric speciation normally requires particular conditions of ecological niche differentiation. However, ant social parasites have been suspected to arise sympatrically, because (dis)loyalty to eusocial kin-structures induces disruptive selection for dispersal and inbreeding. A new study...

  13. Aerosol Chemical Speciation Monitor (ACSM) Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Watson, Thomas B. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-08-15

    The Aerodyne Aerosol Chemical Speciation Monitor (ACSM) measures particle mass loading and chemical composition in real time for non-refractory sub-micron aerosol particles. The ACSM is designed for long-term unattended deployment and routine monitoring applications.

  14. Dearborn GC-MS organic speciation data

    Data.gov (United States)

    U.S. Environmental Protection Agency — Ambient particulate matter organic speciation data from July - August, 2011. This dataset is associated with the following publication: Lynam, M., T. Dvonch, J....

  15. Pb speciation results in amended soils

    Data.gov (United States)

    U.S. Environmental Protection Agency — The dataset shows the distribution of Pb phases resulting from various amendments to change Pb speciation. This dataset is associated with the following publication:...

  16. Mistletoes as parasites: Host specificity and speciation.

    Science.gov (United States)

    Norton, D A; Carpenter, M A

    1998-03-01

    Recent research on parasite evolution has highlighted the importance of host specialization in speciation, either through host-switching or cospeciation. Many parasites show common patterns of host specificity, with higher host specificity where host abundance is high and reliable, phylogenetically conservative host specificity, and formation of races on or in different host species. Recent advances in our understanding of host specificity and speciation patterns in a variety of animal parasites provides valuable insights into the evolutionary biology of mistletoes.

  17. Electrochemical metal speciation in colloidal dispersions

    OpenAIRE

    Wonders, J.H.A.M.

    1995-01-01

    The term "heavy metals" is connected with toxicity. They form strong complexes with enzymes, other proteins and DNA in living organisms, which causes dysfunctioning and hence poisoning. In combination with the uptake mechanism of the organism, speciation of heavy metal determines the bio-availability of heavy metals. In the environment, heavy metals are complexed by soil particles or molecules of organic and inorganic origin. This thesis deals with the speciation and the binding char...

  18. Development of ammonium nitrate based explosives to optimize explosive properties and explosive welding parameters used during explosion cladding

    Science.gov (United States)

    Hurley, Christoph

    The ability to accurately measure and predict the velocity of explosively driven flyer plates has been a subject of significant work by the explosives community for some time. The majority of this work has focused on the use of high-energy, ideal explosives that are of interest for defense applications. Several attempts have been made to modify the experimental methods developed for these ideal explosives for use in testing low-energy, non-ideal explosive compounds (including industrially useful mixtures of ammonium nitrate, fuels, and additives) with varying degrees of success. The detonation properties of non-ideal explosives are difficult to measure precisely due to the effect of physical, environmental, and geometric factors on the detonation of these materials. The work presented in this document attempts to mitigate the variability inherent in measurements of non-ideal, ammonium nitrate-based explosives by performing testing using charge geometry similar to that used in the industrial process of explosion welding. A method to measure flyer plate velocity with optical high-speed imaging using commercially available equipment is described. Flyer plate velocity data from both experimental measurements and numerical modeling is presented. A new formula for predicting explosive energy based on the detonation velocity of an ammonium nitrate based explosive in a planar geometry is proposed and applied to a theoretical explosive cladding scenario.

  19. Biodegradation of nitro-explosives.

    Science.gov (United States)

    Kanekar, Pradnya; Dautpure, Premlata; Sarnaik, Seema

    2003-09-01

    Environmental contamination by nitro compounds is associated principally with the explosives industry. However, global production and use of explosives is unavoidable. The presently widely used nitro-explosives are TNT (Trinitrotoluene), RDX (Royal Demolition Explosive) and HMX (High Melting Explosive). Nevertheless, the problems of these nitro-explosives are almost parallel due to their similarities of production processes, abundance of nitro-explosives and resembling chemical structures. The nitro-explosives per se as well as their environmental transformation products are toxic, showing symptoms as methaemoglobinaemia, kidney trouble, jaundice etc. Hence their removal/degradation from soil/water is essential. Aerobic and anaerobic degradation of TNT and RDX have been reported, while for HMX anaerobic or anoxic degradation have been described in many studies. A multisystem involvement using plants in remediation is gaining importance. Thus the information about degradation of nitro-explosives is available in jigsaw pieces which needs to be arranged and lacunae filled to get concrete degradative schemes so that environmental pollution from nitro-explosives can be dealt with more successfully at a macroscale. An overview of the reports on nitro-explosives degradation, future outlook and studies done by us are presented in this review.

  20. Services Textbook of Explosives

    Science.gov (United States)

    1972-03-01

    and shock effects is obtained by the use of ’primary’ (also known as ’initiatory’) explosives, among the most important of which are mercury fulminate ...Brown had discovered that compressed dry guncotton could be detonated by a mercury fulminate detonator, and a little later they found that compressed wet...of his powder (a mixture of mercury fulminate and potassium chlorate) enclosed in thin copper caps. This idea did not at once meet with the approval

  1. Explosives signatures and analysis

    Science.gov (United States)

    Fountain, Augustus Way, III; Oyler, Jonathan M.; Ostazeski, Stanley A.

    2008-04-01

    The challenge of sampling explosive materials for various high threat military and civilian operational scenarios requires the community to identify and exploit other chemical compounds within the mixtures that may be available to support stand-off detection techniques. While limited surface and vapor phase characterization of IEDs exist, they are insufficient to guide the future development and evaluation of field deployable explosives detection (proximity and standoff) capabilities. ECBC has conducted a limited investigation of three artillery ammunition types to determine what chemical vapors, if any, are available for sensing; the relative composition of the vapors which includes the more volatile compounds in munitions, i.e., plastersizers and binders; and the sensitivity needed detect these vapors at stand-off. Also in partnership with MIT-Lincoln Laboratory, we performed a background measurement campaign at the National Training Center to determine the baseline ambient amounts and variability of nitrates and nitro-ester compounds as vapors, particulates, and on surfaces; as well as other chemical compounds related to non-energetic explosive additives. Environmental persistence studies in contexts relevant to counter-IED sensing operations, such as surface residues, are still necessary.

  2. Explosive Welding of Pipes

    Science.gov (United States)

    Drennov, Oleg; Drennov, Andrey; Burtseva, Olga

    2013-06-01

    For connection by welding it is suggested to use the explosive welding method. This method is rather new. Nevertheless, it has become commonly used among the technological developments. This method can be advantageous (saving material and physical resources) comparing to its statical analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. Explosive welding of cylindrical surfaces is performed by launching of welded layer along longitudinal axis of construction. During this procedure, it is required to provide reliable resistance against radial convergent strains. The traditional method is application of fillers of pipe cavity, which are dense cylindrical objects having special designs. However, when connecting pipes consecutively in pipelines by explosive welding, removal of the fillers becomes difficult and sometimes impossible. The suggestion is to use water as filler. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gasdynamic and elastic-plastic calculations we determined non-deformed mass of water (perturbations, which are moving in the axial direction with sound velocity, should not reach the layer end boundaries for 5-7 circulations of shock waves in the radial direction). Linear dimension of the water layer from the zone of pipe coupling along axis in each direction is >= 2R, where R is the internal radius of pipe.

  3. Fossils, molecules and embryos: new perspectives on the Cambrian explosion

    Science.gov (United States)

    Valentine, J. W.; Jablonski, D.; Erwin, D. H.

    1999-01-01

    The Cambrian explosion is named for the geologically sudden appearance of numerous metazoan body plans (many of living phyla) between about 530 and 520 million years ago, only 1.7% of the duration of the fossil record of animals. Earlier indications of metazoans are found in the Neoproterozic; minute trails suggesting bilaterian activity date from about 600 million years ago. Larger and more elaborate fossil burrows appear near 543 million years ago, the beginning of the Cambrian Period. Evidence of metazoan activity in both trace and body fossils then increased during the 13 million years leading to the explosion. All living phyla may have originated by the end of the explosion. Molecular divergences among lineages leading to phyla record speciation events that have been earlier than the origins of the new body plans, which can arise many tens of millions of years after an initial branching. Various attempts to date those branchings by using molecular clocks have disagreed widely. While the timing of the evolution of the developmental systems of living metazoan body plans is still uncertain, the distribution of Hox and other developmental control genes among metazoans indicates that an extensive patterning system was in place prior to the Cambrian. However, it is likely that much genomic repatterning occurred during the Early Cambrian, involving both key control genes and regulators within their downstream cascades, as novel body plans evolved.

  4. Photoacoustic Sensing of Explosives

    Science.gov (United States)

    2013-11-01

    weight (6 kg), and its power require- ments (24 W) allow for the high portability of the system. Laser vibrometer measurement, 2 meters from target...2515 P ar tic le v el oc ity (× 1 0 μ m /s ) −1 −2 2 0 1 −1 −2 2 0 1 −1 −2 2 0 1 The laser vibrometer and processing algorithms clearly...technique is depicted for a moving system. Note that the laser vibrometer measures the vibrations caused by the explosive vaporization process. At the same

  5. Cobalt toxicity in anaerobic granular sludge: influence of chemical speciation

    NARCIS (Netherlands)

    Bartacek, J.; Fermoso, F.G.; Baldo-Urrutia, A.M.; Hullebusch, van E.D.; Lens, P.N.L.

    2008-01-01

    The influence of cobalt speciation on the toxicity of cobalt to methylotrophic methanogenesis in anaerobic granular sludge was investigated. The cobalt speciation was studied with three different media that contained varying concentrations of complexing ligands [carbonates, phosphates and

  6. [XANES study of lead speciation in duckweed].

    Science.gov (United States)

    Chu, Bin-Bin; Luo, Li-Qiang; Xu, Tao; Yuan, Jing; Sun, Jian-Ling; Zeng, Yuan; Ma, Yan-Hong; Yi, Shan

    2012-07-01

    Qixiashan lead-zinc mine of Nanjing was one of the largest lead zinc deposits in East China Its exploitation has been over 50 years, and the environmental pollution has also been increasing. The lead concentration in the local environment was high, but lead migration and toxic mechanism has not been clear. Therefore, biogeochemistry research of the lead zinc mine was carried out. Using ICP-MS and Pb-L III edge XANES, lead concentration and speciation were analyzed respectively, and duckweed which can tolerate and enriched heavy metals was found in the pollution area. The results showed that the lead concentration of duckweed was 39.4 mg x kg(-1). XANES analysis and linear combination fit indicated that lead stearate and lead sulfide accounted for 65% and 36.9% respectively in the lead speciation of duckweed, suggesting that the main lead speciation of duckweed was sulfur-containing lead-organic acid.

  7. Laser machining of explosives

    Science.gov (United States)

    Perry, Michael D.; Stuart, Brent C.; Banks, Paul S.; Myers, Booth R.; Sefcik, Joseph A.

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  8. Explosives detection for aviation security.

    Science.gov (United States)

    Fainberg, A

    1992-03-20

    The threat of terrorism against commercial aviation has received much attention in the past few years. In response, new ways to detect explosives and to combine techniques based on different phenomena into integrated security systems are being developed to improve aviation security. Several leading methods for explosives and weapons detection are presented.

  9. Introduction to High Explosives Science

    Energy Technology Data Exchange (ETDEWEB)

    Skidmore, Cary Bradford [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-11-17

    These are a set of slides for educational outreach to children on high explosives science. It gives an introduction to the elements involved in this science: carbon, hydrogen, nitrogen, and oxygen. Combined, these form the molecule HMX. Many pictures are also included to illustrate explosions.

  10. Numerical Model for Hydrovolcanic Explosions.

    Science.gov (United States)

    Mader, Charles; Gittings, Michael

    2007-03-01

    A hydrovolcanic explosion is generated by the interaction of hot magma with ground water. It is called Surtseyan after the 1963 explosive eruption off Iceland. The water flashes to steam and expands explosively. Liquid water becomes water gas at constant volume and generates pressures of about 3GPa. The Krakatoa hydrovolcanic explosion was modeled using the full Navier-Stokes AMR Eulerian compressible hydrodynamic code called SAGE [1] which includes the high pressure physics of explosions. The water in the hydrovolcanic explosion was described as liquid water heated by magma to 1100 K. The high temperature water is treated as an explosive with the hot liquid water going to water gas. The BKW [2] steady state detonation state has a peak pressure of 8.9 GPa, a propagation velocity of 5900 meters/sec and the water is compressed to 1.33 g/cc. [1] Numerical Modeling of Water Waves, Second Edition, Charles L. Mader, CRC Press 2004. [2] Numerical Modeling of Explosions and Propellants, Charles L. Mader, CRC Press 1998.

  11. Microbial bioreporters of trace explosives.

    Science.gov (United States)

    Shemer, Benjamin; Koshet, Ori; Yagur-Kroll, Sharon; Belkin, Shimshon

    2017-06-01

    Since its introduction as an explosive in the late 19th century, 2,4,6-trinitrotoluene (TNT), along with other explosive compounds, has left numerous environmental marks. One of these is widespread soil and water pollution by trace explosives in military proving grounds, manufacturing facilities, or actual battlefields. Another dramatic impact is that exerted by the millions of landmines and other explosive devices buried in large parts of the world, causing extensive loss of life, injuries, and economical damage. In this review we highlight recent advances in the design and construction of microbial bioreporters, molecularly engineered to generate a quantifiable dose-dependent signal in the presence of trace amounts of explosives. Such sensor strains may be employed for monitoring environmental pollution as well as for the remote detection of buried landmines. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Caribbean AIDS explosion examined.

    Science.gov (United States)

    2000-03-13

    Homophobia, sex tourism, infidelity, and poverty are major factors causing a rapid explosion of AIDS and increasingly infecting women in the Caribbean. The region has the second largest incidence of AIDS in the world after Africa. The number of people with the HIV virus is likely greater than 500,000 and could be as high as 700,000, about twice the previously reported figures. Societal norms encourage homosexuals to have heterosexual relationships, and married men to have extramarital affairs, while poverty forces men and women to prostitution, often with tourists. In addition, a survey of 8100 school children in 4 English-speaking Caribbean islands revealed that 42% of the children had experienced sex before the age of 10 years; 62% had experienced it by age 12. This finding may reflect a high rate of child molestation in the region.

  13. Nucleosynthesis in stellar explosions

    Energy Technology Data Exchange (ETDEWEB)

    Woosley, S.E.; Axelrod, T.S.; Weaver, T.A.

    1983-01-01

    The final evolution and explosion of stars from 10 M/sub solar/ to 10/sup 6/ M/sub solar/ are reviewed with emphasis on factors affecting the expected nucleosynthesis. We order our paper in a sequence of decreasing mass. If, as many suspect, the stellar birth function was peaked towards larger masses at earlier times (see e.g., Silk 1977; but also see Palla, Salpeter, and Stahler 1983), this sequence of masses might also be regarded as a temporal sequence. At each stage of Galactic chemical evolution stars form from the ashes of preceding generations which typically had greater mass. A wide variety of Type I supernova models, most based upon accreting white dwarf stars, are also explored using the expected light curves, spectra, and nucleosynthesis as diagnostics. No clearly favored Type I model emerges that is capable of simultaneously satisfying all three constraints.

  14. Mixing in explosions

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, A.L.

    1993-12-01

    Explosions always contain embedded turbulent mixing regions, for example: boundary layers, shear layers, wall jets, and unstable interfaces. Described here is one particular example of the latter, namely, the turbulent mixing occurring in the fireball of an HE-driven blast wave. The evolution of the turbulent mixing was studied via two-dimensional numerical simulations of the convective mixing processes on an adaptive mesh. Vorticity was generated on the fireball interface by baroclinic effects. The interface was unstable, and rapidly evolved into a turbulent mixing layer. Four phases of mixing were observed: (1) a strong blast wave phase; (2) and implosion phase; (3) a reshocking phase; and (4) an asymptotic mixing phase. The flowfield was azimuthally averaged to evaluate the mean and r.m.s. fluctuation profiles across the mixing layer. The vorticity decayed due to a cascade process. This caused the corresponding enstrophy parameter to increase linearly with time -- in agreement with homogeneous turbulence calculations of G.K. Batchelor.

  15. Magic cues versus magic preferences in speciation

    NARCIS (Netherlands)

    Maan, Martine E.; Seehausen, Ole

    Question: How does divergent natural selection lead to divergence in mating traits and the evolution of reproductive isolation? Background: Ecological speciation of non-allopatric taxa usually requires the evolution of an association between selective mating and the traits underlying ecological

  16. Behavioural reproductive isolation and speciation in Drosophila

    Indian Academy of Sciences (India)

    The origin of premating reproductive isolation continues to help elucidate the process of speciation and is the central event in the evolution of biological species. Therefore, during the process of species formation the diverging populations must acquire some means of reproductive isolation so that the genes from one gene ...

  17. Characterization of Technetium Speciation in Cast Stone

    Energy Technology Data Exchange (ETDEWEB)

    Um, Wooyong; Jung, Hun Bok; Wang, Guohui; Westsik, Joseph H.; Peterson, Reid A.

    2013-11-11

    This report describes the results from laboratory tests performed at Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE) EM-31 Support Program (EMSP) subtask, “Production and Long-Term Performance of Low Temperature Waste Forms” to provide additional information on technetium (Tc) speciation characterization in the Cast Stone waste form. To support the use of Cast Stone as an alternative to vitrification for solidifying low-activity waste (LAW) and as the current baseline waste form for secondary waste streams at the Hanford Site, additional understanding of Tc speciation in Cast Stone is needed to predict the long-term Tc leachability from Cast Stone and to meet the regulatory disposal-facility performance requirements for the Integrated Disposal Facility (IDF). Characterizations of the Tc speciation within the Cast Stone after leaching under various conditions provide insights into how the Tc is retained and released. The data generated by the laboratory tests described in this report provide both empirical and more scientific information to increase our understanding of Tc speciation in Cast Stone and its release mechanism under relevant leaching processes for the purpose of filling data gaps and to support the long-term risk and performance assessments of Cast Stone in the IDF at the Hanford Site.

  18. ARSENIC SPECIATION ANALYSIS IN HUMAN SALIVA

    Science.gov (United States)

    Background: Determination of arsenic species in human saliva is potentially useful for biomonitoring of human exposure to arsenic and for studying arsenic metabolism. However, there is no report on the speciation analysis of arsenic in saliva. Methods: Arsenic species in saliva ...

  19. Electrochemical metal speciation in colloidal dispersions

    NARCIS (Netherlands)

    Wonders, J.H.A.M.

    1995-01-01

    The term "heavy metals" is connected with toxicity. They form strong complexes with enzymes, other proteins and DNA in living organisms, which causes dysfunctioning and hence poisoning. In combination with the uptake mechanism of the organism, speciation of heavy metal determines the

  20. Biogeochemical speciation of Fe in ocean water

    NARCIS (Netherlands)

    Hiemstra, T.; Riemsdijk, van W.H.

    2006-01-01

    The biogeochemical speciation of Fe in seawater has been evaluated using the consistent Non-Ideal Competitive Adsorption model (NICA¿Donnan model). Two types of data sets were used, i.e. Fe-hydroxide solubility data and competitive ligand equilibration/cathodic stripping voltammetry (CLE/CSV) Fe

  1. Behavioural reproductive isolation and speciation in Drosophila

    Indian Academy of Sciences (India)

    2012-03-29

    Mar 29, 2012 ... somes, DNA sequence and hybrid sterility showed that. D. simulans and D. mauritiana are more closely .... DNA including microsatellites) to study population ge- netic structure and incipient speciation in this ...... in the grasshopper Chorthippus parallelus. Evolution 54. 1687–1698. Trickett AJ and Butlin RK ...

  2. Discriminating between explosions and earthquakes

    Science.gov (United States)

    Cho, Kwang-Hyun

    2014-12-01

    Earthquake, explosion, and a nuclear test data are compared with forward modeling and band-pass filtered surface wave amplitude data for exploring methodologies to improve earthquake-explosion discrimination. The proposed discrimination method is based on the solutions of a double integral transformation in the wavenumber and frequency domains. Recorded explosion data on June 26, 2001 (39.212°N, 125.383°E) and October 30, 2001 (38.748°N, 125.267°E), a nuclear test on October 9, 2006 (41.275°N, 129.095°E), and two earthquakes on April 14, 2002 (39.207°N, 125.686°E) and June 7, 2002 (38.703°N, 125.638°E), all in North Korea, are used to discriminate between explosions and earthquakes by seismic wave analysis and numerical modeling. The explosion signal is characterized by first P waves with higher energy than that of S waves. Rg waves are clearly dominant at 0.05-0.5 Hz in the explosion data but not in the earthquake data. This feature is attributed to the dominant P waves in the explosion and their coupling with the SH components.

  3. Explosive signatures: Pre & post blast

    Science.gov (United States)

    Bernier, Evan Thomas

    Manuscripts 1 and 2 of this dissertation both involve the pre-blast detection of trace explosive material. The first manuscript explores the analysis of human hair as an indicator of exposure to explosives. Field analysis of hair for trace explosives is quick and non-invasive, and could prove to be a powerful linkage to physical evidence in the form of bulk explosive material. Individuals tested were involved in studies which required handling or close proximity to bulk high explosives such as TNT, PETN, and RDX. The second manuscript reports the results of research in the design and application of canine training aids for non-traditional, peroxide-based explosives. Organic peroxides such as triacetonetriperoxide (TATP) and hexamethylenetriperoxidediamine (HMTD) can be synthesized relatively easily with store-bought ingredients and have become popular improvised explosives with many terrorist groups. Due to the hazards of handling such sensitive compounds, this research established methods for preparing training aids which contained safe quantities of TATP and HMTD for use in imprinting canines with their characteristic odor. Manuscripts 3 and 4 of this dissertation focus on research conducted to characterize pipe bombs during and after an explosion (post-blast). Pipe bombs represent a large percentage of domestic devices encountered by law enforcement. The current project has involved the preparation and controlled explosion of over 90 pipe bombs of different configurations in order to obtain data on fragmentation patterns, fragment velocity, blast overpressure, and fragmentation distance. Physical data recorded from the collected fragments, such as mass, size, and thickness, was correlated with the relative power of the initial device. Manuscript 4 explores the microstructural analysis of select pipe bomb fragments. Shock-loading of the pipe steel led to plastic deformation and work hardening in the steel grain structure as evidenced by optical microscopy and

  4. Fire and explosion hazards to flora and fauna from explosives.

    Science.gov (United States)

    Merrifield, R

    2000-06-30

    Deliberate or accidental initiation of explosives can produce a range of potentially damaging fire and explosion effects. Quantification of the consequences of such effects upon the surroundings, particularly on people and structures, has always been of paramount importance. Information on the effects on flora and fauna, however, is limited, with probably the weakest area lying with fragmentation of buildings and their effects on different small mammals. Information has been used here to gain an appreciation of the likely magnitude of the potential fire and explosion effects on flora and fauna. This is based on a number of broad assumptions and a variety of data sources including World War II bomb damage, experiments performed with animals 30-40 years ago, and more recent field trials on building break-up under explosive loading.

  5. Testing of Confining Pressure Impacton Explosion Energy of Explosive Materials

    Science.gov (United States)

    Drzewiecki, Jan; Myszkowski, Jacek; Pytlik, Andrzej; Pytlik, Mateusz

    2017-06-01

    This paper presents the results of testing the explosion effects of two explosive charges placed in an environment with specified values of confining pressure. The aim of this study is to determine the impact of variable environmental conditions on the suitability of particular explosives for their use in the prevention of natural hazards in hard coal mining. The research results will contribute to improving the efficiency of currently adopted technologies of natural hazard prevention and aid in raising the level of occupational safety. To carry out the subject matter measurements, a special test stand was constructed which allows the value of the initial pressure inside the chamber, which constitutes its integral part, to be altered before the detonation of the charge being tested. The obtained characteristics of the pressure changes during the explosion of the analysed charge helped to identify the work (energy) which was produced during the process. The test results are a valuable source of information, opening up new possibilities for the use of explosives, the development of innovative solutions for the construction of explosive charges and their initiation.

  6. [Causation, prevention and treatment of dust explosion].

    Science.gov (United States)

    Dong, Maolong; Jia, Wenbin; Wang, Hongtao; Han, Fei; Li, Xiao-Qiang; Hu, Dahai

    2014-10-01

    With the development of industrial technology, dust explosion accidents have increased, causing serious losses of people's lives and property. With the development of economy, we should lay further emphasis on causation, prevention, and treatment of dust explosion. This article summarizes the background, mechanism, prevention, and treatment of dust explosion, which may provide some professional knowledge and reference for the treatment of dust explosion.

  7. Explosives mimic for testing, training, and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, John G.; Durban, Matthew M.; Gash, Alexander E.; Grapes, Michael D.; Kelley, Ryan S.; Sullivan, Kyle T.

    2018-02-13

    Additive Manufacturing (AM) is used to make mimics for explosives. The process uses mixtures of explosives and matrices commonly used in AM. The explosives are formulated into a mixture with the matrix and printed using AM techniques and equipment. The explosive concentrations are kept less than 10% by wt. of the mixture to conform to requirements of shipping and handling.

  8. Microglass spheres in ammonium nitrate explosives

    OpenAIRE

    Y. Kazakov; G. Turesheva; Olga Golovchenko; N. Bergeneva; R. Seisembayev

    2010-01-01

    Developed consisting the explosive ammonium nitrate, paraffin and mikrosteklosfer. Due to the input of the explosive paraffin increased water resistance of explosives to 60 minutes. By entering into the explosive mikrosteklosfers been improved caking indices, since steklomikrosfers and paraffin was formed seal between the granules of ammonium nitrate.

  9. Microglass spheres in ammonium nitrate explosives

    Directory of Open Access Journals (Sweden)

    Y. Kazakov

    2010-03-01

    Full Text Available Developed consisting the explosive ammonium nitrate, paraffin and mikrosteklosfer. Due to the input of the explosive paraffin increased water resistance of explosives to 60 minutes. By entering into the explosive mikrosteklosfers been improved caking indices, since steklomikrosfers and paraffin was formed seal between the granules of ammonium nitrate.

  10. Suppression of stratified explosive interactions

    Energy Technology Data Exchange (ETDEWEB)

    Meeks, M.K.; Shamoun, B.I.; Bonazza, R.; Corradini, M.L. [Wisconsin Univ., Madison, WI (United States). Dept. of Nuclear Engineering and Engineering Physics

    1998-01-01

    Stratified Fuel-Coolant Interaction (FCI) experiments with Refrigerant-134a and water were performed in a large-scale system. Air was uniformly injected into the coolant pool to establish a pre-existing void which could suppress the explosion. Two competing effects due to the variation of the air flow rate seem to influence the intensity of the explosion in this geometrical configuration. At low flow rates, although the injected air increases the void fraction, the concurrent agitation and mixing increases the intensity of the interaction. At higher flow rates, the increase in void fraction tends to attenuate the propagated pressure wave generated by the explosion. Experimental results show a complete suppression of the vapor explosion at high rates of air injection, corresponding to an average void fraction of larger than 30%. (author)

  11. Explosive Blast Neuropathology and Seizures

    Directory of Open Access Journals (Sweden)

    S. Krisztian eKovacs

    2014-04-01

    Full Text Available Traumatic brain injury (TBI due to explosive blast exposure is a leading combat casualty. It is also implicated as a key contributor to war related mental health diseases. A clinically important consequence of all types of TBI is a high risk for development of seizures and epilepsy. Seizures have been reported in patients who have suffered blast injuries in the Global War on Terror but the exact prevalence is unknown. The occurrence of seizures supports the contention that explosive blast leads to both cellular and structural brain pathology. Unfortunately, the exact mechanism by which explosions cause brain injury is unclear, which complicates development of meaningful therapies and mitigation strategies. To help improve understanding, detailed neuropathological analysis is needed. For this, histopathological techniques are extremely valuable and indispensable. In the following we will review the pathological results, including those from immunohistochemical and special staining approaches, from recent preclinical explosive blast studies.

  12. Causes of the Cambrian Explosion

    National Research Council Canada - National Science Library

    M. Paul Smith; David A. T. Harper

    2013-01-01

    .... Recent hypotheses for the Cambrian explosion fall into three main categories: developmental/genetic, ecologic, and abiotic/environmental, with geochemical hypotheses forming an abundant and distinctive subset of the last...

  13. Furball Explosive Breakout Test

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, Joshua David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-05

    For more than 30 years the Onionskin test has been the primary way to study the surface breakout of a detonation wave. Currently the Onionskin test allows for only a small, one dimensional, slice of the explosive in question to be observed. Asymmetrical features are not observable with the Onionskin test and its one dimensional view. As a result, in 2011, preliminary designs for the Hairball and Furball were developed then tested. The Hairball used shorting pins connected to an oscilloscope to determine the arrival time at 24 discrete points. This limited number of data points, caused by the limited number of oscilloscope channels, ultimately led to the Hairball’s demise. Following this, the Furball was developed to increase the number of data points collected. Instead of shorting pins the Furball uses fiber optics imaged by a streak camera to determine the detonation wave arrival time for each point. The original design was able to capture the detonation wave’s arrival time at 205 discrete points with the ability to increase the number of data points if necessary.

  14. Lidar Detection of Explosives Traces

    Directory of Open Access Journals (Sweden)

    Bobrovnikov Sergei M.

    2016-01-01

    Full Text Available The possibility of remote detection of traces of explosives using laser fragmentation/laser-induced fluorescence (LF/LIF is studied. Experimental data on the remote visualization of traces of trinitrotoluene (TNT, hexogen (RDX, trotyl-hexogen (Comp B, octogen (HMX, and tetryl with a scanning lidar detector of traces of nitrogen-containing explosives at a distance of 5 m are presented.

  15. Intraperitoneal explosion following gastric perforation.

    Science.gov (United States)

    Mansfield, Scott K; Borrowdale, Roderick

    2014-04-01

    The object of this study is to report a rare case of explosion during laparotomy where diathermy ignited intraperitoneal gas from a spontaneous stomach perforation. Fortunately, the patient survived but the surgeon experienced a finger burn. A literature review demonstrates other examples of intraoperative explosion where gastrointestinal gases were the fuel source. Lessons learned from these cases provide recommendations to prevent this potentially lethal event from occurring. Copyright © 2012. Published by Elsevier B.V.

  16. Intraperitoneal explosion following gastric perforation

    Directory of Open Access Journals (Sweden)

    Scott K. Mansfield

    2014-04-01

    Full Text Available The object of this study is to report a rare case of explosion during laparotomy where diathermy ignited intraperitoneal gas from a spontaneous stomach perforation. Fortunately, the patient survived but the surgeon experienced a finger burn. A literature review demonstrates other examples of intraoperative explosion where gastrointestinal gases were the fuel source. Lessons learned from these cases provide recommendations to prevent this potentially lethal event from occurring.

  17. exLOPA for explosion risks assessment.

    Science.gov (United States)

    Markowski, Adam S

    2007-04-11

    The European Union regulations require safety and health protection of workers who are potentially at risk from explosive atmosphere areas. According to the requirements, the operators of installations where potentially explosive atmosphere can occur are obliged to produce an explosion protection document. The key objective of this document is the assessment of explosion risks. This paper is concerned with the so-called explosion layer of protection analysis (exLOPA), which allows for semi-quantitative explosion risk assessment for process plants where explosive atmospheres occur. The exLOPA is based on the original work of CCPS for LOPA but takes into account some typical factors appropriate for explosion, like the probability that an explosive atmosphere will occur, probability that sources of ignition will be present and become effective as well as the probability of failure on demand for appropriate explosion prevention and mitigation means.

  18. The genetics of speciation by reinforcement.

    Directory of Open Access Journals (Sweden)

    Daniel Ortiz-Barrientos

    2004-12-01

    Full Text Available Reinforcement occurs when natural selection strengthens behavioral discrimination to prevent costly interspecies matings, such as when matings produce sterile hybrids. This evolutionary process can complete speciation, thereby providing a direct link between Darwin's theory of natural selection and the origin of new species. Here, by examining a case of speciation by reinforcement in Drosophila,we present the first high-resolution genetic study of variation within species for female mating discrimination that is enhanced by natural selection. We show that reinforced mating discrimination is inherited as a dominant trait, exhibits variability within species, and may be influenced by a known set of candidate genes involved in olfaction. Our results show that the genetics of reinforced mating discrimination is different from the genetics of mating discrimination between species, suggesting that overall mating discrimination might be a composite phenomenon, which in Drosophila could involve both auditory and olfactory cues. Examining the genetics of reinforcement provides a unique opportunity for both understanding the origin of new species in the face of gene flow and identifying the genetic basis of adaptive female species preferences, two major gaps in our understanding of speciation.

  19. Arsenic speciation and sorption in natural environments

    Science.gov (United States)

    Campbell, Kate M.; Nordstrom, D. Kirk

    2014-01-01

    Aqueous arsenic speciation, or the chemical forms in which arsenic exists in water, is a challenging, interesting, and complicated aspect of environmental arsenic geochemistry. Arsenic has the ability to form a wide range of chemical bonds with carbon, oxygen, hydrogen, and sulfur, resulting in a large variety of compounds that exhibit a host of chemical and biochemical properties. Besides the intriguing chemical diversity, arsenic also has the rare capacity to capture our imaginations in a way that few elements can duplicate: it invokes images of foul play that range from sinister to comedic (e.g., “inheritance powder” and arsenic-spiked elderberry wine). However, the emergence of serious large-scale human health problems from chronic arsenic exposure in drinking water has placed a high priority on understanding environmental arsenic mobility, toxicity, and bioavailability, and chemical speciation is key to these important questions. Ultimately, the purpose of arsenic speciation research is to predict future occurrences, mitigate contamination, and provide successful management of water resources.

  20. The Quiet Explosion

    Science.gov (United States)

    2008-07-01

    A European-led team of astronomers are providing hints that a recent supernova may not be as normal as initially thought. Instead, the star that exploded is now understood to have collapsed into a black hole, producing a weak jet, typical of much more violent events, the so-called gamma-ray bursts. The object, SN 2008D, is thus probably among the weakest explosions that produce very fast moving jets. This discovery represents a crucial milestone in the understanding of the most violent phenomena observed in the Universe. Black Hole ESO PR Photo 23a/08 A Galaxy and two Supernovae These striking results, partly based on observations with ESO's Very Large Telescope, will appear tomorrow in Science Express, the online version of Science. Stars that were at birth more massive than about 8 times the mass of our Sun end their relatively short life in a cosmic, cataclysmic firework lighting up the Universe. The outcome is the formation of the densest objects that exist, neutron stars and black holes. When exploding, some of the most massive stars emit a short cry of agony, in the form of a burst of very energetic light, X- or gamma-rays. In the early afternoon (in Europe) of 9 January 2008, the NASA/STFC/ASI Swift telescope discovered serendipitously a 5-minute long burst of X-rays coming from within the spiral galaxy NGC 2770, located 90 million light-years away towards the Lynx constellation. The Swift satellite was studying a supernova that had exploded the previous year in the same galaxy, but the burst of X-rays came from another location, and was soon shown to arise from a different supernova, named SN 2008D. Researchers at the Italian National Institute for Astrophysics (INAF), the Max-Planck Institute for Astrophysics (MPA), ESO, and at various other institutions have observed the supernova at great length. The team is led by Paolo Mazzali of INAF's Padova Observatory and MPA. "What made this event very interesting," says Mazzali, "is that the X-ray signal was very

  1. The evolution of defense mechanisms correlate with the explosive diversification of autodigesting Coprinellus mushrooms (Agaricales, Fungi).

    Science.gov (United States)

    Nagy, László G; Házi, Judit; Szappanos, Balázs; Kocsubé, Sándor; Bálint, Balázs; Rákhely, Gábor; Vágvölgyi, Csaba; Papp, Tamás

    2012-07-01

    Bursts of diversification are known to have contributed significantly to the extant morphological and species diversity, but evidence for many of the theoretical predictions about adaptive radiations have remained contentious. Despite their tremendous diversity, patterns of evolutionary diversification and the contribution of explosive episodes in fungi are largely unknown. Here, using the genus Coprinellus (Psathyrellaceae, Agaricales) as a model, we report the first explosive fungal radiation and infer that the onset of the radiation correlates with a change from a multilayered to a much simpler defense structure on the fruiting bodies. We hypothesize that this change constitutes a key innovation, probably relaxing constraints on diversification imposed by nutritional investment into the development of protective tissues of fruiting bodies. Fossil calibration suggests that Coprinellus mushrooms radiated during the Miocene coinciding with global radiation of large grazing mammals following expansion of dry open grasslands. In addition to diversification rate-based methods, we test the hard polytomy hypothesis, by analyzing the resolvability of internal nodes of the backbone of the putative radiation using Reversible-Jump MCMC. We discuss potential applications and pitfalls of this approach as well as how biologically meaningful polytomies can be distinguished from alignment shortcomings. Our data provide insights into the nature of adaptive radiations in general by revealing a deceleration of morphological diversification through time. The dynamics of morphological diversification was approximated by obtaining the temporal distribution of state changes in discrete traits along the trees and comparing it with the tempo of lineage accumulation. We found that the number of state changes correlate with the number of lineages, even in parts of the tree with short internal branches, and peaks around the onset of the explosive radiation followed by a slowdown, most

  2. Molecular Outflows: Explosive versus Protostellar

    Energy Technology Data Exchange (ETDEWEB)

    Zapata, Luis A.; Rodríguez, Luis F.; Palau, Aina; Loinard, Laurent [Instituto de Radioastronomía y Astrofísica, UNAM, Apdo. Postal 3-72 (Xangari), 58089 Morelia, Michoacán, México (Mexico); Schmid-Burgk, Johannes [Max-Planck-Institut für Radioastronomie, Auf dem Hügel 69, D-53121, Bonn (Germany)

    2017-02-10

    With the recent recognition of a second, distinctive class of molecular outflows, namely the explosive ones not directly connected to the accretion–ejection process in star formation, a juxtaposition of the morphological and kinematic properties of both classes is warranted. By applying the same method used in Zapata et al., and using {sup 12}CO( J = 2-1) archival data from the Submillimeter Array, we contrast two well-known explosive objects, Orion KL and DR21, to HH 211 and DG Tau B, two flows representative of classical low-mass protostellar outflows. At the moment, there are only two well-established cases of explosive outflows, but with the full availability of ALMA we expect that more examples will be found in the near future. The main results are the largely different spatial distributions of the explosive flows, consisting of numerous narrow straight filament-like ejections with different orientations and in almost an isotropic configuration, the redshifted with respect to the blueshifted components of the flows (maximally separated in protostellar, largely overlapping in explosive outflows), the very-well-defined Hubble flow-like increase of velocity with distance from the origin in the explosive filaments versus the mostly non-organized CO velocity field in protostellar objects, and huge inequalities in mass, momentum, and energy of the two classes, at least for the case of low-mass flows. Finally, all the molecular filaments in the explosive outflows point back to approximately a central position (i.e., the place where its “exciting source” was located), contrary to the bulk of the molecular material within the protostellar outflows.

  3. Speciation in Malagasy lemurs: a review of the cryptic diversity in genus Lepilemur

    Directory of Open Access Journals (Sweden)

    Wilmet, L.

    2014-01-01

    Full Text Available Introduction. Madagascar is one of the highest biodiversity hotspots on the planet; however, it is also one of the most heavily impacted countries in the world in terms of forest degradation and general habitat destruction. Literature. Genus Lepilemur, in family Lepilemuridae, is a genus of small, nocturnal, exclusively arboreal Malagasy folivores. All species in the genus have small ranges of distribution. Fully forest-dependent, they have a high risk of extinction. Various models and theories of speciation mechanisms have been developed for the fauna and flora of Madagascar. For instance, in the northwestern part of the island, some authors used Lepilemur spp. to test two existing models of distribution: the "Martin model" and "Wilmé model". Conclusion. Regarding the impact of forest destruction and habitat degradation in Madagascar, conservation strategies for Lepilemur need to be put in place. This paper gives an overview of the current knowledge of the genus Lepilemur and examines speciation for Malagasy lemurs. The understanding of species distribution within biodiversity hotspots is important to identify target for conservation. Therefore, we summarize and compare three biogeography models related to lemurs distribution in order to understand the reasons behind the high diversity (26 species in total among the genus Lepilemur. Particular attention is also given to the concept of species regarding biodiversity issues and the taxonomic explosion in genus Lepilemur.

  4. Speciation of Long-Lived Radionuclides in the Environment

    DEFF Research Database (Denmark)

    Hou, Xiaolin

    This project started in November 2005 and ended in November 2008, the work and research approaches are summarized in this report. This project studied the speciation of radionuclides in environment. A number of speciation analytical methods are developed for determination of species of 129I, 99Tc......, isotopes of Pu, and 237Np in seawater, fresh water, soil, sediment, vegetations, and concrete. The developed methods are used for the investigation of the chemical speciation of these radionuclides as well as their environmental behaviours, especially in Danish environment. In addition the speciation of Pu...

  5. Thickened aqueous slurry explosive composition

    Energy Technology Data Exchange (ETDEWEB)

    Craig, J.F.M.; Matts, T.C.; Seto, P.F.L.

    1979-01-04

    A thickened slurry explosive composition consists of water, inorganic oxidizing salt, fuel, and thickener wherein the thickener is a mixture of an unmodified guar gum and a hydroxypropyl-modified guar gum. The thickener mixture improves the stability and rheologic properties of the explosive. The preferred thickener mixture contains from 15 to 85% by weight of unmodified guar to 15 to 85% by weight of hydroxypropyl-modified guar and the composition preferably comprises 0.2% to 2.0% by weight of the thickener mixture. The thickener mixture is especially effective in explosive compositions sensitized with gas bubbles or with water-soluble organic nitrate for example, ethylene glycol mononitrate, propylene glycol mononitrate, ethanolamine nitrate, propanolamine nitrate, methylamine nitrate, ethylamine nitrate, ethylenediamine dinitrate, urea nitrate, or aniline nitrate. 14 claims.

  6. Optimal dynamic detection of explosives

    Energy Technology Data Exchange (ETDEWEB)

    Moore, David Steven [Los Alamos National Laboratory; Mcgrane, Shawn D [Los Alamos National Laboratory; Greenfield, Margo T [Los Alamos National Laboratory; Scharff, R J [Los Alamos National Laboratory; Rabitz, Herschel A [PRINCETON UNIV; Roslund, J [PRINCETON UNIV

    2009-01-01

    The detection of explosives is a notoriously difficult problem, especially at stand-off distances, due to their (generally) low vapor pressure, environmental and matrix interferences, and packaging. We are exploring optimal dynamic detection to exploit the best capabilities of recent advances in laser technology and recent discoveries in optimal shaping of laser pulses for control of molecular processes to significantly enhance the standoff detection of explosives. The core of the ODD-Ex technique is the introduction of optimally shaped laser pulses to simultaneously enhance sensitivity of explosives signatures while reducing the influence of noise and the signals from background interferents in the field (increase selectivity). These goals are being addressed by operating in an optimal nonlinear fashion, typically with a single shaped laser pulse inherently containing within it coherently locked control and probe sub-pulses. With sufficient bandwidth, the technique is capable of intrinsically providing orthogonal broad spectral information for data fusion, all from a single optimal pulse.

  7. Phylogenies reveal new interpretation of speciation and the Red Queen.

    Science.gov (United States)

    Venditti, Chris; Meade, Andrew; Pagel, Mark

    2010-01-21

    The Red Queen describes a view of nature in which species continually evolve but do not become better adapted. It is one of the more distinctive metaphors of evolutionary biology, but no test of its claim that speciation occurs at a constant rate has ever been made against competing models that can predict virtually identical outcomes, nor has any mechanism been proposed that could cause the constant-rate phenomenon. Here we use 101 phylogenies of animal, plant and fungal taxa to test the constant-rate claim against four competing models. Phylogenetic branch lengths record the amount of time or evolutionary change between successive events of speciation. The models predict the distribution of these lengths by specifying how factors combine to bring about speciation, or by describing how rates of speciation vary throughout a tree. We find that the hypotheses that speciation follows the accumulation of many small events that act either multiplicatively or additively found support in 8% and none of the trees, respectively. A further 8% of trees hinted that the probability of speciation changes according to the amount of divergence from the ancestral species, and 6% suggested speciation rates vary among taxa. By comparison, 78% of the trees fit the simplest model in which new species emerge from single events, each rare but individually sufficient to cause speciation. This model predicts a constant rate of speciation, and provides a new interpretation of the Red Queen: the metaphor of species losing a race against a deteriorating environment is replaced by a view linking speciation to rare stochastic events that cause reproductive isolation. Attempts to understand species-radiations or why some groups have more or fewer species should look to the size of the catalogue of potential causes of speciation shared by a group of closely related organisms rather than to how those causes combine.

  8. Experiments in gasdynamics of explosions.

    Science.gov (United States)

    Oppenheim, A. K.; Soloukhin, R. I.

    1973-01-01

    Various topics concerning recent accomplishments in experimental studies of gasdynamics of explosions are reviewed. Detonations, shocks, and blast waves form these topics. The most important feature of current studies is the particular attention paid to transient processes and the concomitant progress made in the development of novel experimental means for the study of such processes. The most exciting prospects for the future are associated with possibilities of exploiting knowledge of explosion phenomena for the development of such interesting devices as the gasdynamic laser and the apparatus based on the use of lasers to achieve controlled thermonuclear reaction.

  9. Intravesical explosion during transurethral electrosurgery.

    Science.gov (United States)

    Georgios, Kallinikas; Evangelos, Boulinakis; Helai, Habib; Ioannis, Gerzelis

    2015-05-01

    Intravesical explosion is a very rare complication of transurethral resection of prostate and transurethral resection of bladder tumour operations. In vitro studies have shown that the gases produced during the procedure could result in a blast once they are mixed with air from the atmosphere. A 79-year-old male experienced an explosion in his bladder while undergoing a transurethral resection of bladder tumour. The case is presented as well as the way that it was treated as an emergency. Precautions of such events are finally suggested. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  10. Comparative Studies of the Speciation Patterns of Nickel and ...

    African Journals Online (AJOL)

    NJD

    2005-01-31

    Jan 31, 2005 ... ABSTRACT. Results of speciation studies of nickel and chromium in wastewater, surface and groundwater systems using flame atomic .... atomic absorption spectrometer (Varian, Australia) using air- acetylene fuel system ..... it is expected that, overall, the changes in speciation as a result of sample dilution ...

  11. Chemical Speciation of Some metal ions in Groundwaters of Yola ...

    African Journals Online (AJOL)

    Chemical speciation of some metal ions in groundwaters of Yola area using geochemical model were carried out to determine the water quality of the area using the PHREEQC speciation model. The study findings based on model calculations indicated that free Na+, Ca2+, Mg2+ and K+ ions are present and the ...

  12. What do we need to know about speciation?

    NARCIS (Netherlands)

    Butlin, Roger; Debelle, Allan; Kerth, Claudius; Snook, Rhonda R.; Beukeboom, Leo W.; Castillo Cajas, Ruth; Diao, Wenwen; Maan, Martine E.; Paolucci, Silvia; Weissing, Franz J.; van de Zande, Louis; Hoikkala, Anneli; Geuverink, Elzemiek; Jennings, Jackson; Kankare, Maaria; Knott, K. Emily; Tyukmaeva, Venera I.; Zoumadakis, Christos; Ritchie, Michael G.; Barker, Daniel; Immonen, Elina; Kirkpatrick, Mark; Noor, Mohamed; Macias Garcia, Constantino; Schmitt, Thomas; Schilthuizen, Menno

    Speciation has been a major focus of evolutionary biology research in recent years, with many important advances. However, some of the traditional organising principles of the subject area no longer provide a satisfactory framework, such as the classification of speciation mechanisms by geographical

  13. Sympatric speciation by sexual selection : A critical reevaluation

    NARCIS (Netherlands)

    van Doorn, G.S.; Dieckmann, U.; Weissing, F.J.

    Several empirical studies put forward sexual selection as an important driving force of sympatric speciation. This idea agrees with recent models suggesting that speciation may proceed by means of divergent Fisherian runaway processes within a single population. Notwithstanding this, the models so

  14. Self-consistent approach for neutral community models with speciation

    NARCIS (Netherlands)

    Haegeman, Bart; Etienne, Rampal S.

    Hubbell's neutral model provides a rich theoretical framework to study ecological communities. By incorporating both ecological and evolutionary time scales, it allows us to investigate how communities are shaped by speciation processes. The speciation model in the basic neutral model is

  15. The neutral theory of biodiversity with random fission speciation

    NARCIS (Netherlands)

    Etienne, Rampal S.; Haegeman, Bart

    The neutral theory of biodiversity and biogeography emphasizes the importance of dispersal and speciation to macro-ecological diversity patterns. While the influence of dispersal has been studied quite extensively, the effect of speciation has not received much attention, even though it was already

  16. Dynamic speciation analysis and bioavailability of metals in aquatic systems

    NARCIS (Netherlands)

    Leeuwen, van H.P.; Town, R.M.; Buffle, J.; Cleven, R.F.M.J.; Davison, W.; Puy, J.; Riemsdijk, van W.H.; Sigg, L.

    2005-01-01

    Dynamic metal speciation analysis in aquatic ecosystems is emerging as a powerful basis for development of predictions of bioavailability and reliable risk assessment strategies. A given speciation sensor is characterized by an effective time scale or kinetic window that defines the measurable metal

  17. On the dependence of speciation rates on species abundance and ...

    Indian Academy of Sciences (India)

    The question of the potential importance for speciation of large/small population sizes remains open. We compare speciation rates in twelve major taxonomic groups that differ by twenty orders of magnitude in characteristic species abundance (global population number). It is observed that the twenty orders of magnitude's ...

  18. Sympatric speciation and extinction driven by environment dependent sexual selection

    NARCIS (Netherlands)

    Van Doorn, G.S.; Noest, A.J.; Hogeweg, P.

    1998-01-01

    A theoretical model is studied to investigate the possibility of sympatric speciation driven by sexual selection and ecological diversification. In particular, we focus on the rock-dwelling haplochromine cichlid species in Lake Victoria. The high speciation rate in these cichlids has been explained

  19. The EU network on trace element speciation in full swing

    NARCIS (Netherlands)

    Cornelis, R.; Camara, C.; Ebdon, L.; Pitts, L.; Sperling, M.; Morabito, R.; Donard, O.F.X.; Crews, H.; Larsen, E.H.; Neidhart, B.; Ariese, F.; Rosenberg, E.; Berrouiguet, O.; Morrison, G.M.; Cordier, G.; Adams, F.; Dero, B.; Marshall, J.; Stojanik, B.; Ekvall, A.; Quevauviller, P.

    2000-01-01

    The EC-funded thematic network 'Speciation 21' links scientists in analytical chemistry working in method development for the chemical speciation of trace elements, and potential users from industry and representatives of legislative agencies, in the field of environment, food and occupational

  20. Speciation of arsenic and mercury in feed: why and how?

    DEFF Research Database (Denmark)

    Hedegaard, Rikke Susanne Vingborg; Sloth, Jens Jørgen

    2011-01-01

    The understanding of the mechanisms of biological activities and biotransformation of trace elements such as arsenic and mercury has improved during recent years with the help of chemical speciation studies. However, the most important practical application of elemental speciation is in the area ...

  1. Parasites Promote and When Might They Constrain Ecological Speciation?

    Directory of Open Access Journals (Sweden)

    Anssi Karvonen

    2012-01-01

    Full Text Available Research on speciation and adaptive radiation has flourished during the past decades, yet factors underlying initiation of reproductive isolation often remain unknown. Parasites represent important selective agents and have received renewed attention in speciation research. We review the literature on parasite-mediated divergent selection in context of ecological speciation and present empirical evidence for three nonexclusive mechanisms by which parasites might facilitate speciation: reduced viability or fecundity of immigrants and hybrids, assortative mating as a pleiotropic by-product of host adaptation, and ecologically-based sexual selection. We emphasise the lack of research on speciation continuums, which is why no study has yet made a convincing case for parasite driven divergent evolution to initiate the emergence of reproductive isolation. We also point interest towards selection imposed by single versus multiple parasite species, conceptually linking this to strength and multifariousness of selection. Moreover, we discuss how parasites, by manipulating behaviour or impairing sensory abilities of hosts, may change the form of selection that underlies speciation. We conclude that future studies should consider host populations at variable stages of the speciation process, and explore recurrent patterns of parasitism and resistance that could pinpoint the role of parasites in imposing the divergent selection that initiates ecological speciation.

  2. Pulmonary contusion and hemothorax due to explosion

    National Research Council Canada - National Science Library

    Baeza-Herrera, Carlos; Sanjuán-Fabián, Héctor; Medellín-Sierra, Ulises Darío; Nájera-Garduño, Heladio; García-Cabello, Luis Manuel

    2006-01-01

    .... Such is the case of gunpowder explosive objects used during celebration holidays. We present a 14-year-old male who suffered a pulmonary contusion as a consequence of an explosion of "huevo de codorniz...

  3. Experimental Investigations of Multiphase Explosions

    Science.gov (United States)

    Carney, Joel R.; Lightstone, James M.; McGrath, Thomas P.

    2009-12-01

    The addition of solid fuel particles to explosive formulations generally reduces the detonation velocity, but can enhance the blast performance if prompt combustion of the particles occurs in the detonation products and surrounding air early enough to support the shock. The degree to which fuel particles burn heavily depends on their dispersal throughout the explosion field and access to oxidizers. To distinguish the factors affecting the dispersal of fuel particles from those controlling their combustion, we began by analyzing the dispersal of equivalent mock inert particles. Solid glass spheres embedded in detonating small explosive charges were tracked using high-speed digital shadowgraphy. Two different particle sizes, 3 and 30 μm, and different mass fractions in the explosive compositions were considered. Shadowgraphs and pressure measurements were compared to the predictions of a newly developed multiphase numerical model. Reactive aluminum particles in the range of 1 to 120 μm in diameter were also analyzed. During the first 50 μs of the expansion, the general trend for both reactive and inert particles is for the smaller particles to expand near or beyond the leading shock wave to a greater extent than the larger particles. Expansion beyond the initial shock from the detonation is presumed to occur when particles agglomerate. The results are consistent with the predictions of the numerical models, highlighting the role of simple factors such as particle size and density in the early time expansion and mixing of fuels for enhanced blast applications.

  4. Explosive micro-bubble actuator

    NARCIS (Netherlands)

    van den Broek, D.M.; Elwenspoek, Michael Curt

    2007-01-01

    Explosive evaporation occurs when a thin layer of liquid reaches a very high temperature in a very short time. At these temperatures homogeneous nucleation takes place. The nucleated bubbles almost instantly coalesce forming a vapour film followed by rapid growth due to the pressure impulse and

  5. Risperidone and Explosive Aggressive Autism.

    Science.gov (United States)

    Horrigan, Joseph P.; Barnhill, L. Jarrett

    1997-01-01

    In this study, 11 males with autism and mental retardation were administered risperidone. Substantial clinical improvement was noted almost immediately; patients with aggression, self-injury, explosivity, and poor sleep hygiene were most improved. The modal dose for optimal response was 0.5 mg bid. Weight gain was a significant side effect.…

  6. Lead-free primary explosives

    Science.gov (United States)

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  7. The Core-Collapse Supernova Explosion Mechanism

    Science.gov (United States)

    Müller, Bernhard

    2017-11-01

    The explosion mechanism of core-collapse supernovae is a long-standing problem in stellar astrophysics. We briefly outline the main contenders for a solution and review recent efforts to model core-collapse supernova explosions by means of multi-dimensional simulations. Focusing on the neutrino-driven mechanism, we summarize currents efforts to predict supernova explosion and remnant properties.

  8. 30 CFR 7.100 - Explosion tests.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosion tests. 7.100 Section 7.100 Mineral... Underground Coal Mines Where Permissible Electric Equipment is Required § 7.100 Explosion tests. (a) Test... agree. (ii) Remove all parts that do not contribute to the operation or ensure the explosion-proof...

  9. Explosion Power and Pressure Desensitization Resisting Property of Emulsion Explosives Sensitized by MgH2

    Science.gov (United States)

    Cheng, Yangfan; Ma, Honghao; Liu, Rong; Shen, Zhaowu

    2014-07-01

    Due to low detonation power and pressure desensitization problems that traditional emulsion explosives encounter in utilization, a hydrogen-based emulsion explosives was devised. This type of emulsion explosives is sensitized by hydrogen-containing material MgH2, and MgH2 plays a double role as a sensitizer and an energetic material in emulsion explosives. Underwater explosion experiments and shock wave desensitization experiments show that an MgH2 emulsion explosives has excellent detonation characteristics and is resistant to pressure desensitization. The pressure desensitization-resistant mechanism of MgH2 emulsion explosives was investigated using scanning electron microscopy.

  10. SPECIATED VOC EMISSIONS FROM MODERN GDI LIGHT ...

    Science.gov (United States)

    Chassis dynamometer emissions testing was conducted to characterize speciated volatile organic compounds (VOCs), including mobile source air toxics (MSATs) and ozone precursors, in exhaust emissions from three modern gasoline direct injection (GDI) light-duty vehicles. Each GDI vehicle tested in this study utilized slightly different fuel injection technology: Vehicle 1 used a 2.4 liter, naturally aspirated, wall-guided GDI; Vehicle 2 used a 1.8 liter, turbocharged GDI engine; Vehicle 3 used a 1.5 liter, turbocharged, spray-guided GDI engine. Vehicle testing was conducted in a temperature controlled chassis dynamometer test cell at 22 °C over the EPA Federal Test Procedure (FTP) and a portion of the Supplemental FTP (SFTP). The FTP was conducted as a three phase cycle with a cold start, hot transient, and warm start phase (also known as the FTP-75 driving cycle). The SFTP consisted of the US06 driving cycle (conducted without the vehicle’s air conditioning on), which provides a more aggressive driving pattern than the FTP. The vehicles operated on 10 percent ethanol blended gasoline (E10). VOC emissions from diluted vehicle exhaust were sampled over each FTP phase and over the Supplemental FTP with SUMMA canisters for EPA Method TO-15 analysis and with DNPH cartridges for carbonyl analysis by EPA Method TO-11A. This presentation will report the impact of driving cycle and GDI technology on speciated MSAT emissions. MSAT emission rates will be compared

  11. Metallic speciation in environmental samples. La especiacion metalica en muestras medioambientales

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Uria, J.E.

    1994-01-01

    A review about chemical speciation in environmental samples was developed. Starting from definition of speciation, characteristic techniques and squemes for speciation more adequate for the characterization of the several organic/inorganic metal-species was considered. Finally, the possible future tendences of speciation techniques was also considered. (Author) 27 refs.

  12. Sensitivity to friction for primary explosives.

    Science.gov (United States)

    Matyáš, Robert; Šelešovský, Jakub; Musil, Tomáš

    2012-04-30

    The sensitivity to friction for a selection of primary explosives has been studied using a small BAM friction apparatus. The probit analysis was used for the construction of a sensitivity curve for each primary explosive tested. Two groups of primary explosives were chosen for measurement (a) the most commonly used industrially produced primary explosives (e.g. lead azide, tetrazene, dinol, lead styphnate) and (b) the most produced improvised primary explosives (e.g. triacetone triperoxide, hexamethylenetriperoxide diamine, mercury fulminate, acetylides of heavy metals). A knowledge of friction sensitivity is very important for determining manipulation safety for primary explosives. All the primary explosives tested were carefully characterised (synthesis procedure, shape and size of crystals). The sensitivity curves obtained represent a unique set of data, which cannot be found anywhere else in the available literature. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Spot test kit for explosives detection

    Science.gov (United States)

    Pagoria, Philip F; Whipple, Richard E; Nunes, Peter J; Eckels, Joel Del; Reynolds, John G; Miles, Robin R; Chiarappa-Zucca, Marina L

    2014-03-11

    An explosion tester system comprising a body, a lateral flow membrane swab unit adapted to be removeably connected to the body, a first explosives detecting reagent, a first reagent holder and dispenser operatively connected to the body, the first reagent holder and dispenser containing the first explosives detecting reagent and positioned to deliver the first explosives detecting reagent to the lateral flow membrane swab unit when the lateral flow membrane swab unit is connected to the body, a second explosives detecting reagent, and a second reagent holder and dispenser operatively connected to the body, the second reagent holder and dispenser containing the second explosives detecting reagent and positioned to deliver the second explosives detecting reagent to the lateral flow membrane swab unit when the lateral flow membrane swab unit is connected to the body.

  14. Early hominin speciation at the Plio/Pleistocene transition.

    Science.gov (United States)

    Cameron, D W

    2003-01-01

    Over the last half-decade or so, there has been an explosion in the recognition of hominin genera and species. We now have the late Miocene genera Orrorin and Sahelanthropus, the mid Pliocene genus Kenyanthropus, three new Pliocene species of Australopithecus (A. anamensis, A. garhi and A. bahrelghazali) and a sub species of Ardipithecus (Ar. r. kadabba) to contend with. Excepting also the more traditional species allocated to Paranthropus, Australopithecus and early Homo we are approaching around 15 species over 5 million years (excluding hominin evolution over the last one million years). Can such a large number of hominin species be justified? An examination of extant hominid (Gorilla gorilla, Pan troglodytes, and Pan paniscus) anatomical variability indicates that the range of fossil hominin variability supports the recognition of this large number of fossil species. It is also shown that not all hominins are directly related to the emergence of early Homo and as such have become extinct. Indeed the traditional australopithecine species 'A'. anamensis, 'A'. afarensis and 'A'. garhi are considered here to belong to a distinct genus Praeanthropus. They are also argued not be hominins, but rather an as yet undefined hominid group from which the more derived hominins evolved. The first hominin is represented by A. africanus or a hominin very much like it. The Paranthropus clade is defined by a derived heterochronic condition of peramorphosis, associated with sequential progenesis (contraction of successive growth stages) in brain and dental development, but a mixture of peramorphic and paedomorphic features in its craniofacial anatomy. Conversely, Kenyanthropus and Homo both share a pattern of peramorphosis, associated with sequential hypermorphosis (prolongation of successive growth stages) in brain development, and paedomorphosis processes in cranial, facial and dental development. This suggests, that these two clades share an important synapomorphy not

  15. Genomic islands of speciation in Anopheles gambiae.

    Directory of Open Access Journals (Sweden)

    2005-09-01

    Full Text Available The African malaria mosquito, Anopheles gambiae sensu stricto (A. gambiae, provides a unique opportunity to study the evolution of reproductive isolation because it is divided into two sympatric, partially isolated subtaxa known as M form and S form. With the annotated genome of this species now available, high-throughput techniques can be applied to locate and characterize the genomic regions contributing to reproductive isolation. In order to quantify patterns of differentiation within A. gambiae, we hybridized population samples of genomic DNA from each form to Affymetrix GeneChip microarrays. We found that three regions, together encompassing less than 2.8 Mb, are the only locations where the M and S forms are significantly differentiated. Two of these regions are adjacent to centromeres, on Chromosomes 2L and X, and contain 50 and 12 predicted genes, respectively. Sequenced loci in these regions contain fixed differences between forms and no shared polymorphisms, while no fixed differences were found at nearby control loci. The third region, on Chromosome 2R, contains only five predicted genes; fixed differences in this region were also verified by direct sequencing. These "speciation islands" remain differentiated despite considerable gene flow, and are therefore expected to contain the genes responsible for reproductive isolation. Much effort has recently been applied to locating the genes and genetic changes responsible for reproductive isolation between species. Though much can be inferred about speciation by studying taxa that have diverged for millions of years, studying differentiation between taxa that are in the early stages of isolation will lead to a clearer view of the number and size of regions involved in the genetics of speciation. Despite appreciable levels of gene flow between the M and S forms of A. gambiae, we were able to isolate three small regions of differentiation where genes responsible for ecological and behavioral

  16. Robustness of the Approximate Likelihood of the Protracted Speciation Model.

    Science.gov (United States)

    Simonet, Camille Anna; Scherrer, Raphaël; Rego-Costa, Artur; Etienne, Rampal S

    2017-12-22

    The protracted speciation model presents a realistic and parsimonious explanation for the observed slowdown in lineage accumulation through time, by accounting for the fact that speciation takes time. A method to compute the likelihood for this model given a phylogeny is available and allows estimation of its parameters (rate of initiation of speciation, rate of completion of speciation, and extinction rate) and statistical comparison of this model to other proposed models of diversification. However this likelihood computation method makes an approximation of the protracted speciation model to be mathematically tractable: it sometimes counts fewer species than one would do from a biological perspective. This approximation may have large consequences for likelihood-based inferences: it may render any conclusions based on this method completely irrelevant. Here we study to what extent this approximation affects parameter estimations. We simulated phylogenies from which we reconstructed the tree of extant species according to the original, biologically meaningful protracted speciation model and according to the approximation. We then compared the resulting parameter estimates. We found that the differences were larger for high values of extinction rates and small values of speciation-completion rates. Indeed, a long speciation-completion time and a high extinction rate promote the appearance of cases to which the approximation applies. However, surprisingly, the deviation introduced is largely negligible over the parameter space explored, suggesting that this approximate likelihood can be applied reliably in practice to estimate biologically relevant parameters under the original protracted speciation model. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  17. Studying stellar explosions with Athena

    Science.gov (United States)

    O'Brien, P.; Jonker, P.

    Athena is the second large mission selected in the ESA Cosmic Vision plan. With its large collecting area, high spectral-energy resolution (X-IFU instrument) and impressive grasp (WFI instrument), Athena will truly revolutionise X-ray astronomy. The most prodigious sources of high-energy photons are often transitory in nature. Athena will provide the sensitivity and spectral resolution coupled with rapid response to enable the study of the dynamic sky. Potential sources include: distant Gamma-Ray Bursts to probe the reionisation epoch and find missing baryons in the cosmic web; tidal disruption events to reveal dormant supermassive and intermediate-mass black holes; and supernova explosions to understand progenitors and their environments. We illustrate Athenas capabilities and show how it will be able to constrain the nature of explosive transients including gas metallicity and dynamics.

  18. Ranchero Explosive Pulsed Power Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Goforth, J.H.; Atchison, W.L.; Deninger, W.J.; Fowler, C.M.; Herrera, D.H.; King, J.C.; Lopez, E.A.; Oona, H.; Reinovsky, R.E.; Stokes, J.L.; Sena, F.C.; Tabaka, L.J.; Tasker, D.G.; Torres, D.T.; Lindemuth, I.R.; Faehl, R.J.; Keinigs, R.K.; Taylor, A.J.; Rodriguez, G.; Oro, D.M.; Garcia, O.F.; parker, J.V.; Broste, W.B.

    1999-06-27

    The authors are developing the Ranchero high explosive pulsed power (HEPP) system to power cylindrically imploding solid-density liners for hydrodynamics experiments. The near-term goal is to conduct experiments in the regime pertinent to the Atlas Capacitor bank. That is, they will attempt to implode liners of {approximately}50 g mass at velocities approaching 15 km/sec. The basic building block of the HEPP system is a coaxial generator with a 304.8 mm diameter stator, and an initial armature diameter of 152 mm. The armature is expanded by a high explosive (HE) charge detonated simultaneously along its axis. They have reported a variety of experiments conducted with generator modules 43 cm long and have presented an initial design for hydrodynamic liner experiments. In this paper they give a synopsis of their first system test, and a status report on the development of a generator module that is 1.4 m long.

  19. RANCHERO explosive pulsed power experiments

    CERN Document Server

    Goforth, J H; Armijo, E V; Atchison, W L; Bartos, Yu; Clark, D A; Day, R D; Deninger, W J; Faehl, R J; Fowler, C M; García, F P; García, O F; Herrera, D H; Herrera, T J; Keinigs, R K; King, J C; Lindemuth, I R; López, E; Martínez, E C; Martínez, D; McGuire, J A; Morgan, D; Oona, H; Oro, D M; Parker, J V; Randolph, R B; Reinovsky, R E; Rodríguez, G; Stokes, J L; Sena, F C; Tabaka, L J; Tasker, D G; Taylor, A J; Torres, D T; Anderson, H D; Broste, W B; Johnson, J B; Kirbie, H C

    1999-01-01

    The authors are developing the RANCHERO high explosive pulsed power (HEPP) system to power cylindrically imploding solid-density liners for hydrodynamics experiments. Their near-term goal is to conduct experiments in the regime pertinent to the Atlas capacitor bank. That is, they will attempt to implode liners of ~50 g mass at velocities approaching 15 km/sec. The basic building block of the HEPP system is a coaxial generator with a 304.8 mm diameter stator, and an initial armature diameter of 152 mm. The armature is expanded by a high explosive (HE) charge detonated simultaneously along its axis. The authors have reported a variety of experiments conducted with generator modules 43 cm long and have presented an initial design for hydrodynamic liner experiments. In this paper, they give a synopsis of their first system test, and a status report on the development of a generator module that is 1.4 m long. (6 refs).

  20. The EU network on trace element speciation in full swing

    DEFF Research Database (Denmark)

    Cornelis, R.; Camara, C.; Ebdon, L.

    2000-01-01

    The EC-funded thematic network 'Speciation 21' links scientists in analytical chemistry working in method development for the chemical speciation of trace elements, and potential users from industry and representatives of legislative agencies, in the field of environment, food and occupational...... as the influence of packing materials. Once the analytical methodology for the measurement of the trace element species has been optimised, the importance of trace element speciation will grow enormously. Food sciences, material sciences, medicine and occupational health, environmental sciences and related fields...

  1. Explosives Removal from Munitions Wastewaters

    Science.gov (United States)

    1975-01-01

    Rohm and Haas Company, Philadelphia, Pa., 19105 2 Background Generally, pollation in munitions plant waste water stems from washing and steam cleaning...290131 EXPLOSIVES REMOVAL FROM MUNITIONS WST- WATERS B. W. STEVENS, R. P. MCDONNELL ROHM. AND HAAS CO?*ANY, PHILAD2ELPHIA, PENNSYLVANIA R. K. PXDREN...operations. Waste water from a typical TNT manufacturing J21 plant may contain from 40 to 120 ppm of TNT and lesser aimounts of 2,4, DNT. K. Waste

  2. Shell and explosive hydrogen burning

    CERN Document Server

    Boeltzig, A; Cavanna, F; Cristallo, S; Davinson, T; Depalo, R; deBoer, R J; Di Leva, A; Ferraro, F; Imbriani, G; Marigo, P; Terrasi, F; Wiescher, M

    2016-01-01

    The nucleosynthesis of light elements, from helium up to silicon, mainly occurs in Red Giant and Asymptotic Giant Branch stars and Novae. The relative abundances of the synthesized nuclides critically depend on the rates of the nuclear processes involved, often through non-trivial reaction chains, combined with complex mixing mechanisms. In this review, we summarize the contributions made by LUNA experiments in furthering our understanding of nuclear reaction rates necessary for modeling nucleosynthesis in AGB stars and Novae explosions.

  3. Chemical state speciation by resonant Raman scattering

    CERN Document Server

    Karydas, A G; Zarkadas, C; Paradelis, T; Kallithrakas-Kontos, N

    2002-01-01

    In the resonant Raman scattering (RRS) process the emitted photon exhibits a continuous energy distribution with a high energy cutoff limit. This cutoff energy depends on the chemical state of the element under examination. In the present work, the possibility of identifying the chemical state of V atoms by employing RRS spectroscopy with a semiconductor Si(Li) detector is investigated. A proton induced Cr K alpha x-ray beam was used as the incident radiation, having a fixed energy lower than the V K-absorption edge. The net RRS distributions extracted from the energy dispersive spectra of metallic V and its compound targets were simulated by an appropriate theoretical model. The results showed the possibility of employing RRS spectroscopy with a semiconductor detector for chemical speciation studies.

  4. Carbon speciation and surface tension of fog

    Science.gov (United States)

    Capel, P.D.; Gunde, R.; Zurcher, F.; Giger, W.

    1990-01-01

    The speciation of carbon (dissolved/particulate, organic/inorganic) and surface tension of a number of radiation fogs from the urban area of Zurich, Switzerland, were measured. The carbon species were dominated by "dissolved" organic carbon (DOC; i.e., the fraction that passes through a filter), which was typically present at levels of 40-200 mg/L. Less than 10% of the DOC was identified as specific individual organic compounds. Particulate organic carbon (POC) accounted for 26-41% of the mass of the particles, but usually less than 10% of the total organic carbon mass. Inorganic carbon species were relatively minor. The surface tensions of all the measured samples were less than pure water and were correlated with their DOC concentrations. The combination of high DOC and POC and low surface tension suggests a mechanism for the concentration of hydrophobic organic contaminants in the fog droplet, which have been observed by numerous investigators. ?? 1990 American Chemical Society.

  5. Horizontal Gene Transfer, Dispersal and Haloarchaeal Speciation

    Science.gov (United States)

    Papke, R. Thane; Corral, Paulina; Ram-Mohan, Nikhil; de la Haba, Rafael R.; Sánchez-Porro, Cristina; Makkay, Andrea; Ventosa, Antonio

    2015-01-01

    The Halobacteria are a well-studied archaeal class and numerous investigations are showing how their diversity is distributed amongst genomes and geographic locations. Evidence indicates that recombination between species continuously facilitates the arrival of new genes, and within species, it is frequent enough to spread acquired genes amongst all individuals in the population. To create permanent independent diversity and generate new species, barriers to recombination are probably required. The data support an interpretation that rates of evolution (e.g., horizontal gene transfer and mutation) are faster at creating geographically localized variation than dispersal and invasion are at homogenizing genetic differences between locations. Therefore, we suggest that recurrent episodes of dispersal followed by variable periods of endemism break the homogenizing forces of intrapopulation recombination and that this process might be the principal stimulus leading to divergence and speciation in Halobacteria. PMID:25997110

  6. NICKEL SPECIATION OF URBAN PARTICULATE MATTER

    Energy Technology Data Exchange (ETDEWEB)

    Kevin C. Galbreath; Charlene R. Crocker; Carolyn M. Nyberg; Frank E. Huggins; Gerald P. Huffman

    2003-10-01

    A four-step sequential Ni extraction method, summarized in Table AB-1, was evaluated for identifying and quantifying the Ni species occurring in urban total suspended particulate (TSP) matter and fine particulate matter (<10 {micro}m [PM{sub 10}] and <2.5 {micro}m [PM{sub 2.5}] in aerodynamic diameter). The extraction method was originally developed for quantifying soluble, sulfidic, elemental, and oxidic forms of Ni that may occur in industrial atmospheres. X-ray diffraction (XRD) and x-ray absorption fine structure (XAFS) spectroscopy were used to evaluate the Ni species selectivity of the extraction method. Uncertainties in the chemical speciation of Ni in urban PM{sub 10} and PM{sub 2.5} greatly affect inhalation health risk estimates, primarily because of the large variability in acute, chronic, and cancer-causing effects for different Ni compounds.

  7. Horizontal Gene Transfer, Dispersal and Haloarchaeal Speciation

    Directory of Open Access Journals (Sweden)

    R. Thane Papke

    2015-05-01

    Full Text Available The Halobacteria are a well-studied archaeal class and numerous investigations are showing how their diversity is distributed amongst genomes and geographic locations. Evidence indicates that recombination between species continuously facilitates the arrival of new genes, and within species, it is frequent enough to spread acquired genes amongst all individuals in the population. To create permanent independent diversity and generate new species, barriers to recombination are probably required. The data support an interpretation that rates of evolution (e.g., horizontal gene transfer and mutation are faster at creating geographically localized variation than dispersal and invasion are at homogenizing genetic differences between locations. Therefore, we suggest that recurrent episodes of dispersal followed by variable periods of endemism break the homogenizing forces of intrapopulation recombination and that this process might be the principal stimulus leading to divergence and speciation in Halobacteria.

  8. Horizontal gene transfer, dispersal and haloarchaeal speciation.

    Science.gov (United States)

    Papke, R Thane; Corral, Paulina; Ram-Mohan, Nikhil; Haba, Rafael R de la; Sánchez-Porro, Cristina; Makkay, Andrea; Ventosa, Antonio

    2015-05-19

    The Halobacteria are a well-studied archaeal class and numerous investigations are showing how their diversity is distributed amongst genomes and geographic locations. Evidence indicates that recombination between species continuously facilitates the arrival of new genes, and within species, it is frequent enough to spread acquired genes amongst all individuals in the population. To create permanent independent diversity and generate new species, barriers to recombination are probably required. The data support an interpretation that rates of evolution (e.g., horizontal gene transfer and mutation) are faster at creating geographically localized variation than dispersal and invasion are at homogenizing genetic differences between locations. Therefore, we suggest that recurrent episodes of dispersal followed by variable periods of endemism break the homogenizing forces of intrapopulation recombination and that this process might be the principal stimulus leading to divergence and speciation in Halobacteria.

  9. Nuclear Explosions 1945-1998

    Energy Technology Data Exchange (ETDEWEB)

    Bergkvist, Nils-Olov; Ferm, Ragnhild

    2000-07-01

    The main part of this report is a list of nuclear explosions conducted by the United States, the Soviet Union, the United Kingdom, France, China, India and Pakistan in 1945-98. The list includes all known nuclear test explosions and is compiled from a variety of sources including officially published information from the USA, Russia and France. The details given for each explosion (date, origin time, location, yield, type, etc.) are often compiled from more than one source because the individual sources do not give complete information. The report includes a short background to nuclear testing and provides brief information on the Comprehensive Nuclear-Test-Ban Treaty and the verification regime now being established to verify compliance with the treaty. It also summarizes nuclear testing country by country. The list should be used with some caution because its compilation from a variety of sources means that some of the data could be incorrect. This report is the result of cooperation between the Defence Research Establishment (FOA) and the Stockholm International Peace Research Institute (SIPRI)

  10. Data base of chemical explosions in Kazakhstan

    Energy Technology Data Exchange (ETDEWEB)

    Demin, V.N. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan); Malahova, M.N. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan); Martysevich, P.N. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan); Mihaylova, N.N. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan); Nurmagambetov, A. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan); Kopnichev, Yu.F. D. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan); Edomin, V.I. [National Nuclear Center of Republic of Kazakhstan Institute of Geophysical Researches (Kazakhstan)

    1996-12-01

    Within the bounds of this report, the following works were done: (1) Information about explosion quarries, located in Southern, Eastern and Northern Kasakstan was summarized. (2) The general information about seismicity of areas of location of explosion quarries was adduced. (3) The system of observation and seismic apparatus, recording the local earthquakes and quarry explosions at the territory of Kazakstan were described. (4) Data base of quarry explosions, that were carried out in Southern, Eastern and Northern Kazakstan during 1995 and first half of 1996 year was adduced. (5) Upon the data of registration of explosions in Southern Kazakstan the correlative dependences between power class of explosions and summary weight of charge were constructed. (6) Seismic records of quarry explosions were adduced. It is necessary to note, that the collection of data about quarry explosions in Kazakstan in present time is very difficult task. Organizations, that makes these explosions, are always suffering reorganizations and sometimes it is actually impossible to receive all the necessary information. Some quarries are situated in remote, almost inaccessible regions, and within the bounds of supplier financing not the every quarry was in success to visit. So the present data base upon the chemical explosions for 1995 is not full and in further it`s expansion is possible.

  11. Extraction techniques in speciation analysis of environmental samples

    Energy Technology Data Exchange (ETDEWEB)

    Morabito, R. [ENEA Casaccia, Rome (Italy). Environmental Dept.

    1995-02-01

    One of the main problems in speciation analysis is that the different species of metals are present in complex matrices at very low concentration levels. Thus it is almost always necessary to separate the analytes of concern from the matrix and to concentrate them up to detectable concentration levels. Special care should be paid during extraction in order to avoid any contamination of samples, losses and changes in speciation of analytes of concern. The most common extraction techniques for speciation analysis of Pb, Sn, Hg, Cr, As, Se and Sb in liquid and solid samples are presented and briefly discussed. Due to the large quantity of material to be covered, speciation of alkyl, aryl, and macromolecular compounds (porphyrines, thioneines, etc.) has not been taken into account. (orig.)

  12. Speciation of long-lived radionuclides in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Xiaolin Hou

    2008-11-15

    This project started in November 2005 and ended in November 2008, the work and research approaches are summarized in this report. This project studied the speciation of radionuclides in environment. A number of speciation analytical methods are developed for determination of species of 129I, 99Tc, isotopes of Pu, and 237Np in seawater, fresh water, soil, sediment, vegetations, and concrete. The developed methods are used for the investigation of the chemical speciation of these radionuclides as well as their environmental behaviours, especially in Danish environment. In addition the speciation of Pu isotopes in waste samples from the decommissioning of Danish nuclear facilities is also investigated. The report summarizes these works completed in this project. Through this research project, a number of research papers have been published in the scientific journals, the research results has also been presented in the Nordic and international conference/meeting and communicated to international colleagues. Some publications are also enclosed to this report. (au)

  13. Speciation and Persistence of Dimethoate in the Aquatic Environment

    African Journals Online (AJOL)

    Speciation and Persistence of Dimethoate in the Aquatic Environment: Characterization in Terms of a Rate Model that Takes Into Account Hydrolysis, Photolysis, Microbial Degradation and Adsorption of the Pesticide by Colloidal and Sediment Particles.

  14. SPECIATED VOC EMISSIONS FROM MODERN GDI LIGHT DUTY VEHICLES

    Science.gov (United States)

    Chassis dynamometer emissions testing was conducted to characterize speciated volatile organic compounds (VOCs), including mobile source air toxics (MSATs) and ozone precursors, in exhaust emissions from three modern gasoline direct injection (GDI) light-duty vehicles. Each GDI v...

  15. [Speciation analysis and toxicity of arsenic in realgar bioleaching solution].

    Science.gov (United States)

    Zhang, Jing-hong; Fan, Qin; Li, Hong-yu

    2010-05-01

    To analyze speciation and toxicity of arsenic in realgar bioleaching solution, and to explore its possible relation between speciation and toxicity. Capillary zone electrophoresis (CZE) can be used quickly and simply onto the simultaneous separation and quantitative determination of the speciation of arsenic in realgar bioleaching solution. The effects of three different realgar bioleaching liquids on the acute toxicity level of rat were also investigated as well. Parallel experiments with traditional processing realgar via gastric irrigation were conducted for comparison. There are three different arsenic species in realgar bioleaching solution (iAs(III), iAs(V) MMA(V)), and the processing method largely affected speciation and toxicity of arsenic of it. It was found that the toxicity level was decreased through increasing the amount of MMA(V). These results indicate that the species of arsenic may be tightly relationship to its toxicity in realgar bioleaching solution.

  16. Pb Speciation Data to Estimate Lead Bioavailability to Quail

    Data.gov (United States)

    U.S. Environmental Protection Agency — Linear combination fitting data for lead speciation of soil samples evaluated through an in-vivo/in-vitro correlation for quail exposure. This dataset is associated...

  17. How humans drive speciation as well as extinction

    DEFF Research Database (Denmark)

    Bull, Joseph William; Maron, M.

    2016-01-01

    influence upon divergence in microorganisms. Even if human activities resulted in no net loss of species diversity by balancing speciation and extinction rates, this would probably be deemed unacceptable. We discuss why, based upon ‘no net loss’ conservation literature— considering phylogenetic diversity...... and other metrics, risk aversion, taboo trade-offs and spatial heterogeneity. We conclude that evaluating speciation alongside extinction could result in more nuanced understanding of biosphere trends, clarifying what it is we actually value about biodiversity....

  18. Mixing and speciation algorithms for geochemical and reactive transport problems

    OpenAIRE

    De Gaspari, Francesca

    2015-01-01

    Geochemical and reactive transport modelling are essential tools in hydrogeology. They help to identify and assess geochemical processes occurring in applications such as groundwater contamination, water-rock interactions and geologic carbon sequestration. In this thesis we present methods for mixing and speciation calculations to be used for both interpretation of hydrochemical data and numerical modelling. The first method presented allows solving geochemical speciation using redundant i...

  19. Can environmental change affect host/parasite-mediated speciation?

    Science.gov (United States)

    Brunner, Franziska S; Eizaguirre, Christophe

    2016-08-01

    Parasitism can be a driver of species divergence and thereby significantly alter species formation processes. While we still need to better understand how parasite-mediated speciation functions, it is even less clear how this process is affected by environmental change. Both rapid and gradual changes of the environment can modify host immune responses, parasite virulence and the specificity of their interactions. They will thereby change host-parasite evolutionary trajectories and the potential for speciation in both hosts and parasites. Here, we summarise mechanisms of host-parasite interactions affecting speciation and subsequently consider their susceptibility to environmental changes. We mainly focus on the effects of temperature change and nutrient input to ecosystems as they are major environmental stressors. There is evidence for both disruptive and accelerating effects of those pressures on speciation that seem to be context-dependent. A prerequisite for parasite-driven host speciation is that parasites significantly alter the host's Darwinian fitness. This can rapidly lead to divergent selection and genetic adaptation; however, it is likely preceded by more short-term plastic and transgenerational effects. Here, we also consider how these first responses and their susceptibility to environmental changes could lead to alterations of the species formation process and may provide alternative pathways to speciation. Copyright © 2016 The Authors. Published by Elsevier GmbH.. All rights reserved.

  20. Estimation of body exposure to explosion.

    Science.gov (United States)

    Oliver, William R; Baker, Andrew M; Powell, James D; Cotone, Chris M; Meeker, Jeffrey

    2002-09-01

    An ordnance-disposal expert was killed while disposing of a cache of explosives. The likely position of the body was reconstructed by modeling the explosion as an omnidirectional emission of particles from a model of the explosion site and noting the distribution of particles on a model of a human. The applications and limitations of this method in reconstructing the events and correlation with the injuries noted at autopsy are discussed.

  1. 75 FR 70291 - Commerce in Explosives; List of Explosive Materials (2010R-27T)

    Science.gov (United States)

    2010-11-17

    ... hydrocarbons. Explosive organic nitrate mixtures. Explosive powders. F Flash powder. Fulminate of mercury. Fulminate of silver. Fulminating gold. Fulminating mercury. Fulminating platinum. Fulminating silver. G... fulminate. Mercury oxalate. Mercury tartrate. Metriol trinitrate. Minol-2 . MMAN ; methylamine nitrate...

  2. 77 FR 58410 - Commerce in Explosives; List of Explosive Materials (2012R-10T)

    Science.gov (United States)

    2012-09-20

    ... hydrocarbons. Explosive organic nitrate mixtures. Explosive powders. F Flash powder. ] Fulminate of mercury. Fulminate of silver. Fulminating gold. Fulminating mercury. Fulminating platinum. Fulminating silver. G... fulminate. Mercury oxalate. Mercury tartrate. Metriol trinitrate. Minol-2 . MMAN ; methylamine nitrate...

  3. Shock Initiation of Damaged Explosives

    Energy Technology Data Exchange (ETDEWEB)

    Chidester, S K; Vandersall, K S; Tarver, C M

    2009-10-22

    Explosive and propellant charges are subjected to various mechanical and thermal insults that can increase their sensitivity over the course of their lifetimes. To quantify this effect, shock initiation experiments were performed on mechanically and thermally damaged LX-04 (85% HMX, 15% Viton by weight) and PBX 9502 (95% TATB, 5% Kel-F by weight) to obtain in-situ manganin pressure gauge data and run distances to detonation at various shock pressures. We report the behavior of the HMX-based explosive LX-04 that was damaged mechanically by applying a compressive load of 600 psi for 20,000 cycles, thus creating many small narrow cracks, or by cutting wedge shaped parts that were then loosely reassembled, thus creating a few large cracks. The thermally damaged LX-04 charges were heated to 190 C for long enough for the beta to delta solid - solid phase transition to occur, and then cooled to ambient temperature. Mechanically damaged LX-04 exhibited only slightly increased shock sensitivity, while thermally damaged LX-04 was much more shock sensitive. Similarly, the insensitive explosive PBX 9502 was mechanically damaged using the same two techniques. Since PBX 9502 does not undergo a solid - solid phase transition but does undergo irreversible or 'rachet' growth when thermally cycled, thermal damage to PBX 9502 was induced by this procedure. As for LX-04, the thermally damaged PBX 9502 demonstrated a greater shock sensitivity than mechanically damaged PBX 9502. The Ignition and Growth reactive flow model calculated the increased sensitivities by igniting more damaged LX-04 and PBX 9502 near the shock front based on the measured densities (porosities) of the damaged charges.

  4. High Explosives Research and Development (HERD) Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The purpose is to provide high explosive formulation, chemical analysis, safety and performance testing, processing, X-ray, quality control and loading support for...

  5. Explosives detection technology for commercial aviation security

    Science.gov (United States)

    Schafrik, Robert E.

    1994-03-01

    The threat posed to commercial aviation by small, concealed plastic explosives is particularly onerous. Small amounts of these highly energetic explosives are difficult to reliably detect using current technologies. But they can cause significant damage to an aircraft that can result in the destruction of the aircraft, resulting in loss of life. The key issues regarding explosive detection technologies include: What methods can detect plastic explosives? How do these methods perform in practice? How can the different methods be best employed to counter the terrorist threat?

  6. Theoretical basis of explosion effects using al - granules in bulk explosives

    OpenAIRE

    Dambov, Risto; Nikolic, Miroslav; Dambov, Ilija; Cacarov, Vladimir

    2013-01-01

    Use of bulk explosives such as AN-FO, heavy AN-FO, SLLURY and various Emulsions significantly improves explosive energy efficiency in the rock massif. Many operating engineers have the opportunity to examine and modify the technical characteristics of explosives and technologists especially, in the production of explosives where the main goal is improvement, the energy capacity by adding various components. The question is when is technically and economically most suitable to use ...

  7. Explosive transition in amorphous microwire

    Science.gov (United States)

    Borisenko, I. Yu.; Tulin, V. A.

    2017-11-01

    An amorphous microwire in a glass shell offers a quick thermal response and can be rapidly heated to the crystallization point. When heated by a current pulse with a small amplitude and duration, the wire passes from the amorphous to microcrystalline state. The crystallization of the amorphous state may represent a slow or explosive process depending on the parameters of the pulse. In the latter case, the emission of electromagnetic waves (flash of light) and a sharp rise in the resistance are observed. The rate of propagation of the crystallization front in our experiments has been found to be about 1 m/s.

  8. Explosives detection using nanoporous coatings

    Science.gov (United States)

    Pina, María P.; Pellejero, Ismael; Urbiztondo, Miguel; Sesé, Javier; Santamaría, J.

    2011-06-01

    Zeolite-coated cantilevers provided with internal heating elements have been developed and used for the selective detection of nitroderivates, in particular o-nitrotoluene as an example of an explosive-related molecule. In particular, Co exchanged commercial BEA zeolites have been deployed of rectangular Si cantilevers by microdropping technique. In particular, two different strategies have been demonstrated to increase the zeolite modified cantilevers performance: the sensing coating and the operating temperature. As a result, o-nitrotoluene LOD values below 1 ppm are attained at room temperature conditions; whereas the interference of toluene at concentrations below 1000 ppm is completely suppressed by heating the cantilever.

  9. Supernova Explosions Stay In Shape

    Science.gov (United States)

    2009-12-01

    At a very early age, children learn how to classify objects according to their shape. Now, new research suggests studying the shape of the aftermath of supernovas may allow astronomers to do the same. A new study of images from NASA's Chandra X-ray Observatory on supernova remnants - the debris from exploded stars - shows that the symmetry of the remnants, or lack thereof, reveals how the star exploded. This is an important discovery because it shows that the remnants retain information about how the star exploded even though hundreds or thousands of years have passed. "It's almost like the supernova remnants have a 'memory' of the original explosion," said Laura Lopez of the University of California at Santa Cruz, who led the study. "This is the first time anyone has systematically compared the shape of these remnants in X-rays in this way." Astronomers sort supernovas into several categories, or "types", based on properties observed days after the explosion and which reflect very different physical mechanisms that cause stars to explode. But, since observed remnants of supernovas are leftover from explosions that occurred long ago, other methods are needed to accurately classify the original supernovas. Lopez and colleagues focused on the relatively young supernova remnants that exhibited strong X-ray emission from silicon ejected by the explosion so as to rule out the effects of interstellar matter surrounding the explosion. Their analysis showed that the X-ray images of the ejecta can be used to identify the way the star exploded. The team studied 17 supernova remnants both in the Milky Way galaxy and a neighboring galaxy, the Large Magellanic Cloud. For each of these remnants there is independent information about the type of supernova involved, based not on the shape of the remnant but, for example, on the elements observed in it. The researchers found that one type of supernova explosion - the so-called Type Ia - left behind relatively symmetric, circular

  10. The gas dynamics of explosions

    CERN Document Server

    Lee,\tJohn H S

    2016-01-01

    Explosions, and the non-steady shock propagation associated with them, continue to interest researchers working in different fields of physics and engineering (such as astrophysics and fusion). Based on the author's course in shock dynamics, this book describes the various analytical methods developed to determine non-steady shock propagation. These methods offer a simple alternative to the direct numerical integration of the Euler equations and offer a better insight into the physics of the problem. Professor Lee presents the subject systematically and in a style that is accessible to graduate students and researchers working in shock dynamics, combustion, high-speed aerodynamics, propulsion and related topics.

  11. Power of TATP based explosives.

    Science.gov (United States)

    Matyás, Robert; Selesovský, Jakub

    2009-06-15

    The power of various explosive mixtures based on triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP), ammonimum nitrate (AN), urea nitrate (UrN) and water (W), namely TATP/AN, oil/AN, TATP/UrN, TATP/W and TATP/AN/W, was studied using the ballistic mortar test. The ternary mixtures of TATP/AN/W have relatively high power in case of the low water contents. Their power decrease significantly with increasing the water content in the mixture to more than 30%.

  12. 27 CFR 70.445 - Commerce in explosives.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Commerce in explosives. 70... Cartridges, and Explosives § 70.445 Commerce in explosives. Part 55 of title 27 CFR contains the regulations..., explosives, (b) Permits for users who buy or transport explosives in interstate or foreign commerce, (c...

  13. 29 CFR 1926.902 - Surface transportation of explosives.

    Science.gov (United States)

    2010-07-01

    ... of explosives shall be equipped with a fully charged fire extinguisher, in good condition. An... 29 Labor 8 2010-07-01 2010-07-01 false Surface transportation of explosives. 1926.902 Section 1926... Explosives § 1926.902 Surface transportation of explosives. (a) Transportation of explosives shall meet the...

  14. ANALYSIS OF HAZARDS OF FIRE AND EXPLOSION DURING TREATMENT WITH AMMONIUM SELITRENNOE EXPLOSIVES

    OpenAIRE

    Luchko, Ivan Andriiovych; Pashkov, Anatolii Pavlovych

    2016-01-01

    Dangerous factors at the handling ammonium nitrate explosives are covered. Dependence of influence of critical diameter for detonation on degree of compaction of the explosives is specified, causes of self-ignition of liquid explosive mixes are determined and measures according to their elimination are recommended.

  15. A structured approach to forensic study of explosions: The TNO Inverse Explosion Analysis tool

    NARCIS (Netherlands)

    Voort, M.M. van der; Wees, R.M.M. van; Brouwer, S.D.; Jagt-Deutekom, M.J. van der; Verreault, J.

    2015-01-01

    Forensic analysis of explosions consists of determining the point of origin, the explosive substance involved, and the charge mass. Within the EU FP7 project Hyperion, TNO developed the Inverse Explosion Analysis (TNO-IEA) tool to estimate the charge mass and point of origin based on observed damage

  16. High temperature two component explosive

    Science.gov (United States)

    Mars, James E.; Poole, Donald R.; Schmidt, Eckart W.; Wang, Charles

    1981-01-01

    A two component, high temperature, thermally stable explosive composition comprises a liquid or low melting oxidizer and a liquid or low melting organic fuel. The oxidizer and fuel in admixture are incapable of substantial spontaneous exothermic reaction at temperatures on the order of 475.degree. K. At temperatures on the order of 475.degree. K., the oxidizer and fuel in admixture have an activation energy of at least about 40 kcal/mol. As a result of the high activation energy, the preferred explosive compositions are nondetonable as solids at ambient temperature, and become detonable only when heated beyond the melting point. Preferable oxidizers are selected from alkali or alkaline earth metal nitrates, nitrites, perchlorates, and/or mixtures thereof. Preferred fuels are organic compounds having polar hydrophilic groups. The most preferred fuels are guanidinium nitrate, acetamide and mixtures of the two. Most preferred oxidizers are eutectic mixtures of lithium nitrate, potassium nitrate and sodium nitrate, of sodium nitrite, sodium nitrate and potassium nitrate, and of potassium nitrate, calcium nitrate and sodium nitrate.

  17. Geotechnical Aspects of Explosive Compaction

    Directory of Open Access Journals (Sweden)

    Mahdi Shakeran

    2016-01-01

    Full Text Available Explosive Compaction (EC is the ground modification technique whereby the energy released from setting off explosives in subsoil inducing artificial earthquake effects, which compact the soil layers. The efficiency of EC predominantly depends on the soil profile, grain size distribution, initial status, and the intensity of energy applied to the soil. In this paper, in order to investigate the geotechnical aspects, which play an important role in performance of EC, a database has been compiled from thirteen-field tests or construction sites around the world, where EC has been successfully applied for modifying soil. This research focuses on evaluation of grain size distribution and initial stability status of deposits besides changes of soil penetration resistance due to EC. Results indicated suitable EC performance for unstable and liquefiable deposits having particle sizes ranging from gravel to silty sand with less than 40% silt content and less than 10% clay content. However, EC is most effective in fine-to-medium sands with a fine content less than 5% and hydraulically deposited with initial relative density ranging from 30% to 60%. Moreover, it has been observed that EC can be an effective method to improve the density, stability, and resistance of the target soils.

  18. Advances IN Explosive Nuclear Astrophysics

    Science.gov (United States)

    Lotay, Gavin

    2016-09-01

    Breathtaking results from the Planck satellite mission and Hubble space telescope have highlighted the key role modern Astronomy is playing for our understanding of Big Bang Cosmology. However, not so widely publicized is the similar wealth of observational data now available on explosive stellar phenomena, such as X-ray bursts, novae and Supernovae. These astronomical events are responsible for the synthesis of almost all the chemical elements we find on Earth and observe in our Galaxy, as well as energy generation throughout the cosmos. Regrettably, understanding the latest collection of observational data is severely hindered by the current, large uncertainties in the underlying nuclear physics processes that drive such stellar scenarios. In order to resolve this issue, it is becoming increasingly clear that there is a need to explore the unknown properties and reactions of nuclei away from the line of stability. Consequently, state-of-the-art radioactive beam facilities have become terrestrial laboratories for the reproduction of explosive astrophysical events. In this talk, both direct and indirect methods for studying key astrophysical reactions using radioactive beams will be discussed.

  19. Epigenetic inheritance, genetic assimilation and speciation.

    Science.gov (United States)

    Pál, C; Miklós, I

    1999-09-07

    Epigenetic inheritance systems enable the environmentally induced phenotypes to be transmitted between generations. Jablonka and Lamb (1991, 1995) proposed that these systems have a substantial role during speciation. They argued that divergence of isolated populations may be first triggered by the accumulation of (heritable) phenotypic differences that are later followed and strengthened by genetic changes. The plausibility of this idea is examined in this paper. At first, we discuss the "exploratory" behaviour of an epigenetic inheritance system on a one peak adaptive landscape. If a quantitative trait is far from the optimum, then it is advantageous to induce heritable phenotypic variation. Conversely, if the genotypes get closer to the peak, it is more favorable to canalize the phenotypic expression of the character. This process would lead to genetic assimilation. Next we show that the divergence of heritable epigenetic marks acts to reduce or to eliminate the genetic barrier between two adaptive peaks. Therefore, an epigenetic inheritance system can increase the probability of transition from one adaptive state to another. Peak shift might be initiated by (i) slight changes in the inducing environment or by (ii) genetic drift of the genes controlling epigenetic variability. Remarkably, drift-induced transition is facilitated even if phenotypic variation is not heritable. A corollary of our thesis is that evolution can proceed through suboptimal phenotypic states, without passing through a deep adaptive valley of the genotype. We also consider the consequences of this finding on the dynamics and mode of reproductive isolation. Copyright 1999 Academic Press.

  20. Arsenic speciation and reactivity in poultry litter

    Science.gov (United States)

    Arai, Y.; Lanzirotti, A.; Sutton, S.; Davis, J.A.; Sparks, D.L.

    2003-01-01

    Recent U.S. government action to lower the maximum concentration levels (MCL) of total arsenic (As) (10 ppb) in drinking water has raised serious concerns about the agricultural use of As-containing biosolids such as poultry litter (PL). In this study, solid-state chemical speciation, desorbability, and total levels of As in PL and long-term amended soils were investigated using novel synchrotronbased probing techniques (microfocused (??) synchrotron X-ray fluorescence (SXRF) and ??-X-ray absorption near-edge structure (XANES) spectroscopies) coupled with chemical digestion and batch experiments. The total As levels in the PL were as high as ???50 mg kg-1, and As(II/III and V) was always concentrated in abundant needle-shaped microscopic particles (???20/ ??m x 850 ??m) associated with Ca, Cu, and Fe and to a lesser extent with S, CI, and Zn. Postedge XANES features of litter particles are dissimilar to those of the organo-As(V) compound in poultry feed (i.e., roxarsone), suggesting possible degradation/transformation of roxarsone in the litter and/or in poultry digestive tracts. The extent of As desorption from the litter increased with increasing time and pH from 4.5 to 7, but at most 15% of the total As was released after 5 d at pH 7, indicating the presence of insoluble phases and/or strongly retained soluble compounds. No significant As accumulation (effects on As contamination in surrounding soilwater environments.

  1. Speciation trajectories in recombining bacterial species.

    Directory of Open Access Journals (Sweden)

    Pekka Marttinen

    2017-07-01

    Full Text Available It is generally agreed that bacterial diversity can be classified into genetically and ecologically cohesive units, but what produces such variation is a topic of intensive research. Recombination may maintain coherent species of frequently recombining bacteria, but the emergence of distinct clusters within a recombining species, and the impact of habitat structure in this process are not well described, limiting our understanding of how new species are created. Here we present a model of bacterial evolution in overlapping habitat space. We show that the amount of habitat overlap determines the outcome for a pair of clusters, which may range from fast clonal divergence with little interaction between the clusters to a stationary population structure, where different clusters maintain an equilibrium distance between each other for an indefinite time. We fit our model to two data sets. In Streptococcus pneumoniae, we find a genomically and ecologically distinct subset, held at a relatively constant genetic distance from the majority of the population through frequent recombination with it, while in Campylobacter jejuni, we find a minority population we predict will continue to diverge at a higher rate. This approach may predict and define speciation trajectories in multiple bacterial species.

  2. Speciation of triphenyltin compounds using Moessbauer spectroscopy. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Eng, G.

    1993-11-01

    Organotin compounds have been used widely as the active agent in antifouling marine paints. Organotin compounds, i.e., tributyltin compounds (TBTs) and triphenyltin compounds (TPTs) have been found to be effective in preventing the unwanted attachment and development of aquatic organisms such as barnacles, sea grass and hydroids on ships, hulls and underwater surfaces. However, these organotin compounds have been found to be toxic to non-targeted marine species as well. While speciation of tributyltins in environmental water systems has received much attention in the literature, little information concerning the speciation of triphenyltins is found. Therefore, it would be important to study the fate of TPTs in the aquatic environment, particularly in sediments, both oxic and anoxic, in order to obtain speciation data. Since marine estuaries consist of areas with varying salinity and pH, it is important to investigate the speciation of these compounds under varying salinity conditions. In addition, evaluation of the speciation of these compounds as a function of pH would give an insight into how these compounds might interact with sediments in waters where industrial chemical run-offs can affect the pH of the estuarine environment. Finally, since organotins are present in both salt and fresh water environments, the speciation of the organotins in seawater and distilled water should also be studied. Moessbauer spectroscopy would provide a preferred method to study the speciation of triphenyltins as they leach from marine paints into the aquatic environment. Compounds used in this study are those triphenyltin compounds that are commonly incorporated into marine paints such as triphenyltin fluoride (TPTF), triphenyltin acetate (TPTOAc), triphenyltin chloride (TPTCl) and triphenyltin hydroxide (TPTOH).

  3. Fire and explosion hazards of oil shale

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The US Bureau of Mines publication presents the results of investigations into the fire and explosion hazards of oil shale rocks and dust. Three areas have been examined: the explosibility and ignitability of oil shale dust clouds, the fire hazards of oil shale dust layers on hot surfaces, and the ignitability and extinguishment of oil shale rubble piles. 10 refs., 54 figs., 29 tabs.

  4. Sensitivity to friction for primary explosives

    Energy Technology Data Exchange (ETDEWEB)

    Matyas, Robert, E-mail: robert.matyas@upce.cz [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, Pardubice 532 10 (Czech Republic); Selesovsky, Jakub; Musil, Tomas [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, Pardubice 532 10 (Czech Republic)

    2012-04-30

    Highlights: Black-Right-Pointing-Pointer The friction sensitivity of 14 samples of primary explosives was determined. Black-Right-Pointing-Pointer The same apparatus (small scale BAM) and the same method (probit analysis) was used. Black-Right-Pointing-Pointer The crystal shapes and sizes were documented with microscopy. Black-Right-Pointing-Pointer Almost all samples are less sensitive than lead azide, which is commercially used. Black-Right-Pointing-Pointer The organic peroxides (TATP, DADP, HMTD) are not as sensitive as often reported. - Abstract: The sensitivity to friction for a selection of primary explosives has been studied using a small BAM friction apparatus. The probit analysis was used for the construction of a sensitivity curve for each primary explosive tested. Two groups of primary explosives were chosen for measurement (a) the most commonly used industrially produced primary explosives (e.g. lead azide, tetrazene, dinol, lead styphnate) and (b) the most produced improvised primary explosives (e.g. triacetone triperoxide, hexamethylenetriperoxide diamine, mercury fulminate, acetylides of heavy metals). A knowledge of friction sensitivity is very important for determining manipulation safety for primary explosives. All the primary explosives tested were carefully characterised (synthesis procedure, shape and size of crystals). The sensitivity curves obtained represent a unique set of data, which cannot be found anywhere else in the available literature.

  5. Explosive Joining for Nuclear-Reactor Repair

    Science.gov (United States)

    Bement, L. J.; Bailey, J. W.

    1983-01-01

    In explosive joining technique, adapter flange from fuel channel machined to incorporate a V-notch interface. Ribbon explosive, 1/2 inch (1.3 cm) in width, drives V-notched wall of adapter into bellows assembly, producing atomic-level metallurgical bond. Ribbon charge yields joint with double parent metal strength.

  6. Forecasting volcanic explosions based on seismic quiescence

    Science.gov (United States)

    Roman, D.; La Femina, P.; Rodgers, M.; Geirsson, H.; Tenorio, V.

    2016-12-01

    Volcanic eruptions are generally forecast based on strong increases in monitoring parameters such as seismicity or gas emissions above a relatively low background level. Because of this, forecasting individual explosions during an ongoing eruption, or at persistently restless volcanoes, is difficult as seismicity, gas emissions, and other indicators of unrest are already in a heightened state. Therefore, identification of short-term precursors to individual explosions at volcanoes already in heightened states of unrest, and an understanding of explosion trigger mechanisms, is important for the reduction of volcanic risk worldwide. Seismic and visual observations at Telica Volcano, Nicaragua, demonstrate that a) episodes of seismic quiescence reliably preceded explosions during an eruption in May 2011 and b) the duration of precursory quiescence and the energy released in the ensuing explosion were strongly correlated. Precursory seismic quiescence is interpreted as the result of sealing of shallow gas pathways, leading to pressure accumulation and eventual catastrophic failure of the system, culminating in an explosion. Longer periods of sealing and pressurization lead to greater energy release in the ensuing explosion. Near-real-time observations of seismic quiescence at restless or erupting volcanoes can thus be useful for both timely eruption warnings and for forecasting the energy of impending explosions.

  7. Some analytical methods for explosives: Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Selig, W.

    1965-12-08

    This report is the second compilation of methods for analyzing explosives. All the methods were developed for routine performance by techniques, and an attempt has therefore been made to keep them as simple as possible. Methods are presented for analyzing plastic-bonded explosives based on sym-cyclomethylenetetra-nitramine (HMX), based on viton in addition to HMX, and based on pentraerythritol tetranitrate (PETN).

  8. Detection and dispersal of explosives by ants

    Science.gov (United States)

    McFee, John E.; Achal, Steve; Faust, Anthony A.; Puckrin, Eldon; House, Andrew; Reynolds, Damon; McDougall, William; Asquini, Adam

    2009-05-01

    The ability of animals to detect explosives is well documented. Mammalian systems, insects and even single celled organisms have all been studied and in a few cases employed to detect explosives. This paper will describe the potential ability of ants to detect, disperse and possibly neutralize bulk explosives. In spring 2008 a team of DRDC and Itres scientists conducted experiments on detecting surface-laid and buried landmines, improvised explosive devices (IEDs) and their components. Measurements were made using state-of-the-art short wave and thermal infrared hyperspectral imagers mounted on a personnel lift. During one of the early morning measurement sessions, a wispy, long linear trail was seen to emanate several meters from piles of explosives that were situated on the ground. Upon close visual inspection, it was observed that ants had found the piles of explosives and were carrying it to their ant hill, a distance of almost 20 meters from the piles. Initial analysis of the hyperspectral images clearly revealed the trail to the ant hill of explosives, despite being present in quantities not visible to the unaided eye. This paper details these observations and discusses them in the context of landmine and IED detection and neutralization. Possible reasons for such behaviour are presented. A number of questions regarding the behaviour, many pertinent to the use of ants in a counter-landmine/IED role, are presented and possible methods of answering them are discussed. Anecdotal evidence from deminers of detection and destruction of explosives by ants are presented.

  9. 76 FR 8923 - Explosive Siting Requirements

    Science.gov (United States)

    2011-02-16

    ... launch site in Title 14, Code of Federal Regulations (14 CFR) part 420. Part of the application for a... operational requirements of other regulatory regimes, they do not pose a risk of fire or explosion. Isolating... explosion due to the mixing of the two. In accordance with current DDESB and National Fire Protection...

  10. Characterization of mock high-explosive powder

    Energy Technology Data Exchange (ETDEWEB)

    Schmitt, C.R.; Dorsey, G.F.

    1979-03-01

    Analytical characterization and explosibility tests were made on a simulative high-explosive powder consisting of cyanuric acid, melamine, nitrocellulose, and tris-(..beta..-chloroethyl)-phosphate. Tests indicated that the powder presents no unusual safety or health hazards in isostatic-pressing and dry-machining operations.

  11. Explosion risks and consequences for tunnels

    NARCIS (Netherlands)

    Weerheijm, J.; Berg, A.C. van den

    2014-01-01

    Tunnel accidents with transports of dangerous goods may lead to explosions. Risk assessment for these accidents is complicated because of the low probability and the unknown, but disastrous effects expected. Especially the lack of knowledge on the strength of the explosion and the consequences for

  12. 33 CFR 401.67 - Explosive vessels.

    Science.gov (United States)

    2010-07-01

    ... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Dangerous Cargo § 401.67 Explosive vessels. A vessel carrying explosives, either Government or commercial, as defined in the Dangerous Cargo Act of the United States and in the International Maritime Dangerous Goods Code, Class 1, Divisions 1.1 to 1.5 inclusive...

  13. 49 CFR 173.54 - Forbidden explosives.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Forbidden explosives. 173.54 Section 173.54 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Definitions, Classification and Packaging for Class 1 § 173.54 Forbidden explosives...

  14. The St Marys fragmentation grenade explosion.

    Science.gov (United States)

    Nocera, A

    1997-05-19

    The accidental explosion of a fragmentation grenade in a munitions factory at St Marys injured four workers, two critically. The prompt response by ambulances and physician-staffed helicopter emergency medical service prevented deaths, but the incident suggests lessons for the future handling of urban explosions.

  15. Hydrodynamics of Explosion Experiments and Models

    CERN Document Server

    Kedrinskii, Valery K

    2005-01-01

    Hydronamics of Explosion presents the research results for the problems of underwater explosions and contains a detailed analysis of the structure and the parameters of the wave fields generated by explosions of cord and spiral charges, a description of the formation mechanisms for a wide range of cumulative flows at underwater explosions near the free surface, and the relevant mathematical models. Shock-wave transformation in bubbly liquids, shock-wave amplification due to collision and focusing, and the formation of bubble detonation waves in reactive bubbly liquids are studied in detail. Particular emphasis is placed on the investigation of wave processes in cavitating liquids, which incorporates the concepts of the strength of real liquids containing natural microinhomogeneities, the relaxation of tensile stress, and the cavitation fracture of a liquid as the inversion of its two-phase state under impulsive (explosive) loading. The problems are classed among essentially nonlinear processes that occur unde...

  16. [Explosion injuries - prehospital care and management].

    Science.gov (United States)

    Holsträter, Thorsten; Holsträter, Susanne; Rein, Daniela; Helm, Matthias; Hossfeld, Björn

    2013-11-01

    Explosion injuries are not restricted to war-like military conflicts or terrorist attacks. The emergency physician may also encounter such injuries in the private or industrial fields, injuries caused by fireworks or gas explosions. In such cases the injury patterns are especially complex and may consist of blunt and penetrating injuries as well as thermal damage. Emergency medical personnel must be prepared to cope with explosion trauma not only in individual cases but also in major casualty incidents (MCI). This necessitates a sound knowledge about the mechanisms and processes of an explosion as well as the particular pathophysiological relationships of explosion injuries in order to be able to initiate the best possible, guideline-conform trauma therapy. © Georg Thieme Verlag Stuttgart · New York.

  17. Independence day explosion on lovers key.

    Science.gov (United States)

    Harding, Brett A; Wolf, Barbara C

    2007-09-01

    The display of fireworks is a popular holiday celebration in the United States. Because injuries due to recreational fireworks-related explosions among private consumers are relatively common, the sale of fireworks is regulated by the federal government and is also limited by state and local laws. In contrast, because fireworks display companies are under tight safety regulations, explosions in the professional pyrotechnics industry are uncommon occurrences, and the literature contains rare reports of injuries and fatalities resulting from such explosions. We report the 2003 Fourth of July commercial fireworks explosion on Lovers Key in southwest Florida that resulted in five fatalities. Events occurring during the investigation of the scene of this explosion illustrate the unique considerations and hazards for medicolegal death investigators, law enforcement and other investigative agencies. Additionally, this case demonstrates unusual aspects of the postmortem examinations performed on victims of fireworks-related incidents.

  18. Explosion interaction with water in a tube

    Science.gov (United States)

    Homae, T.; Sugiyama, Y.; Wakabayashi, K.; Matsumura, T.; Nakayama, Y.

    2017-02-01

    As proposed and legislated in Japan, subsurface magazines have an explosive storage chamber, a horizontal passageway, and a vertical shaft for a vent. The authors found that a small amount of water on the floor of the storage chamber mitigated blast pressure remarkably. The mitigation mechanism has been examined more closely. To examine the effect of water, the present study assesses explosions in a transparent, square cross section, and a straight tube. A high-speed camera used to observe the tube interior. Blast pressure in and around the tube was also measured. Images obtained using the high-speed camera revealed that water inside the tube did not move after the explosion. Differences between cases of tubes without water and with water were unclear. Along with blast pressure measurements, these study results suggest that blast pressure mitigation by water occurs because of interaction between the explosion and the water near the explosion point.

  19. Local Explosion Monitoring using Rg

    Science.gov (United States)

    O'Rourke, C. T.; Baker, G. E.

    2016-12-01

    Rg is the high-frequency fundamental-mode Rayleigh wave, which is only excited by near-surface events. As such, an Rg detection indicates that a seismic source is shallow, generally less than a few km depending on the velocity structure, and so likely man-made. Conversely, the absence of Rg can indicate that the source is deeper and so likely naturally occurring. We have developed a new automated method of detecting Rg arrivals from various explosion sources at local distances, and a process for estimating the likelihood that a source is not shallow when no Rg is detected. Our Rg detection method scans the spectrogram of a seismic signal for a characteristic frequency peak. We test this on the Bighorn Arch Seismic Experiment data, which includes earthquakes, active source explosions in boreholes, and mining explosions recorded on a dense network that spans the Bighorn Mountains and Powder River Basin. The Rg passbands used were 0.4-0.8 Hz for mining blasts and 0.8-1.2 Hz for borehole shots. We successfully detect Rg across the full network for most mining blasts. The lower-yield shots are detectable out to 50 km. We achieve methods that use cross-correlation to detect retrograde motion of the surface waves. Our method shows more complete detection across the network, especially in the Powder River Basin where Rg exhibits prograde motion that does not trigger the existing detector. We also estimate the likelihood that Rg would have been detected from a surface source, based on the measured P amplitude. For example, an event with a large P wave and no detectable Rg would have a high probability of being a deeper event, whereas we cannot confidently determine whether an event with a small P wave and no Rg detection is shallow or not. These results allow us to detect Rg arrivals, which indicate a shallow source, and to use the absence of Rg to estimate the likelihood that a source in a calibrated region is not shallow enough to be man-made.

  20. Explosion probability of unexploded ordnance: expert beliefs.

    Science.gov (United States)

    MacDonald, Jacqueline Anne; Small, Mitchell J; Morgan, M G

    2008-08-01

    This article reports on a study to quantify expert beliefs about the explosion probability of unexploded ordnance (UXO). Some 1,976 sites at closed military bases in the United States are contaminated with UXO and are slated for cleanup, at an estimated cost of $15-140 billion. Because no available technology can guarantee 100% removal of UXO, information about explosion probability is needed to assess the residual risks of civilian reuse of closed military bases and to make decisions about how much to invest in cleanup. This study elicited probability distributions for the chance of UXO explosion from 25 experts in explosive ordnance disposal, all of whom have had field experience in UXO identification and deactivation. The study considered six different scenarios: three different types of UXO handled in two different ways (one involving children and the other involving construction workers). We also asked the experts to rank by sensitivity to explosion 20 different kinds of UXO found at a case study site at Fort Ord, California. We found that the experts do not agree about the probability of UXO explosion, with significant differences among experts in their mean estimates of explosion probabilities and in the amount of uncertainty that they express in their estimates. In three of the six scenarios, the divergence was so great that the average of all the expert probability distributions was statistically indistinguishable from a uniform (0, 1) distribution-suggesting that the sum of expert opinion provides no information at all about the explosion risk. The experts' opinions on the relative sensitivity to explosion of the 20 UXO items also diverged. The average correlation between rankings of any pair of experts was 0.41, which, statistically, is barely significant (p= 0.049) at the 95% confidence level. Thus, one expert's rankings provide little predictive information about another's rankings. The lack of consensus among experts suggests that empirical studies

  1. Analytical tools for speciation in the field of toxicology

    Energy Technology Data Exchange (ETDEWEB)

    Bresson, C. [CEA, DEN, DPC, SEARS, Gif-sur-Yvette (France). Laboratoire de Developpement Analytique Nucleaire, Isotopique et Elementaire; Chartier, F. [CEA, DEN, Gif-sur-Yvette (France). Dept. de Physico-Chimie; Ansoborlo, E. [CEA, DEN, DRCP, CETAMA, Marcoule, Bagnols-sur-ceze (France); Ortega, R. [Bordeaux Univ., CENBG, UMR 5797, Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, Gradignan (France)

    2013-08-01

    The knowledge of the speciation of elements at trace and ultra-trace level, in biological and environmental media is essential to acquire a better understanding of the mechanisms of toxicity, transport and accumulation in which they are involved. Determining the speciation of an element in a given medium is challenging and requires the knowledge of different methodological approaches: the calculation approach and the experimental approach through the use of dedicated analytical and spectroscopic tools. In this framework, this mini-review reports the approaches to investigate the speciation of elements in biological and environmental media as well as the experimental techniques of speciation analysis, illustrated by recent examples. The main analytical and spectroscopic techniques to obtain structural, molecular, elemental and isotopic information are described. A brief overview of separation techniques coupled with spectrometric techniques is given. Imaging and micro-localisation techniques, which aim at determining the in situ spatial distribution of elements and molecules in various solid samples, are also presented. The last part deals with the development of micro-analytical systems, since they open crucial perspectives to speciation analysis for low sample amounts and analysis on field. (orig.)

  2. Genomics of Rapid Incipient Speciation in Sympatric Threespine Stickleback.

    Directory of Open Access Journals (Sweden)

    David A Marques

    2016-02-01

    Full Text Available Ecological speciation is the process by which reproductively isolated populations emerge as a consequence of divergent natural or ecologically-mediated sexual selection. Most genomic studies of ecological speciation have investigated allopatric populations, making it difficult to infer reproductive isolation. The few studies on sympatric ecotypes have focused on advanced stages of the speciation process after thousands of generations of divergence. As a consequence, we still do not know what genomic signatures of the early onset of ecological speciation look like. Here, we examined genomic differentiation among migratory lake and resident stream ecotypes of threespine stickleback reproducing in sympatry in one stream, and in parapatry in another stream. Importantly, these ecotypes started diverging less than 150 years ago. We obtained 34,756 SNPs with restriction-site associated DNA sequencing and identified genomic islands of differentiation using a Hidden Markov Model approach. Consistent with incipient ecological speciation, we found significant genomic differentiation between ecotypes both in sympatry and parapatry. Of 19 islands of differentiation resisting gene flow in sympatry, all were also differentiated in parapatry and were thus likely driven by divergent selection among habitats. These islands clustered in quantitative trait loci controlling divergent traits among the ecotypes, many of them concentrated in one region with low to intermediate recombination. Our findings suggest that adaptive genomic differentiation at many genetic loci can arise and persist in sympatry at the very early stage of ecotype divergence, and that the genomic architecture of adaptation may facilitate this.

  3. Sexual selection drives speciation in an Amazonian frog

    Science.gov (United States)

    Boul, K.E.; Funk, W.C.; Darst, C.R.; Cannatella, D.C.; Ryan, M.J.

    2007-01-01

    One proposed mechanism of speciation is divergent sexual selection, whereby divergence in female preferences and male signals results in behavioural isolation. Despite the appeal of this hypothesis, evidence for it remains inconclusive. Here, we present several lines of evidence that sexual selection is driving behavioural isolation and speciation among populations of an Amazonian frog (Physalaemus petersi). First, sexual selection has promoted divergence in male mating calls and female preferences for calls between neighbouring populations, resulting in strong behavioural isolation. Second, phylogenetic analysis indicates that populations have become fixed for alternative call types several times throughout the species' range, and coalescent analysis rejects genetic drift as a cause for this pattern, suggesting that this divergence is due to selection. Finally, gene flow estimated with microsatellite loci is an average of 30 times lower between populations with different call types than between populations separated by a similar geographical distance with the same call type, demonstrating genetic divergence and incipient speciation. Taken together, these data provide strong evidence that sexual selection is driving behavioural isolation and speciation, supporting sexual selection as a cause for speciation in the wild. ?? 2006 The Royal Society.

  4. On the origin of species by sympatric speciation

    Science.gov (United States)

    Dieckmann, Ulf; Doebeli, Michael

    1999-07-01

    Understanding speciation is a fundamental biological problem. It is believed that many species originated through allopatric divergence, where new species arise from geographically isolated populations of the same ancestral species. In contrast, the possibility of sympatric speciation (in which new species arise without geographical isolation) has often been dismissed, partly because of theoretical difficulties,. Most previous models analysing sympatric speciation concentrated on particular aspects of the problem while neglecting others. Here we present a model that integrates a novel combination of different features and show that sympatric speciation is a likely outcome of competition for resources. We use multilocus genetics to describe sexual reproduction in an individual-based model, and we consider the evolution of assortative mating (where individuals mate preferentially with like individuals) depending either on an ecological character affecting resource use or on a selectively neutral marker trait. In both cases, evolution of assortative mating often leads to reproductive isolation between ecologically diverging subpopulations. When assortative mating depends on a marker trait, and is therefore not directly linked to resource competition, speciation occurs when genetic drift breaks the linkage equilibrium between the marker and the ecological trait. Our theory conforms well with mounting empirical evidence for the sympatric origin of many species.

  5. Song evolution, speciation, and vocal learning in passerine birds.

    Science.gov (United States)

    Mason, Nicholas A; Burns, Kevin J; Tobias, Joseph A; Claramunt, Santiago; Seddon, Nathalie; Derryberry, Elizabeth P

    2017-03-01

    Phenotypic divergence can promote reproductive isolation and speciation, suggesting a possible link between rates of phenotypic evolution and the tempo of speciation at multiple evolutionary scales. To date, most macroevolutionary studies of diversification have focused on morphological traits, whereas behavioral traits─including vocal signals─are rarely considered. Thus, although behavioral traits often mediate mate choice and gene flow, we have a limited understanding of how behavioral evolution contributes to diversification. Furthermore, the developmental mode by which behavioral traits are acquired may affect rates of behavioral evolution, although this hypothesis is seldom tested in a phylogenetic framework. Here, we examine evidence for rate shifts in vocal evolution and speciation across two major radiations of codistributed passerines: one oscine clade with learned songs (Thraupidae) and one suboscine clade with innate songs (Furnariidae). We find that evolutionary bursts in rates of speciation and song evolution are coincident in both thraupids and furnariids. Further, overall rates of vocal evolution are higher among taxa with learned rather than innate songs. Taken together, these findings suggest an association between macroevolutionary bursts in speciation and vocal evolution, and that the tempo of behavioral evolution can be influenced by variation in developmental modes among lineages. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  6. Female mate-choice behavior and sympatric speciation.

    Science.gov (United States)

    Verzijden, Machteld N; Lachlan, Robert F; Servedio, Maria R

    2005-10-01

    Many models have investigated how the process of speciation may occur in sympatry. In these models, individuals are either asexual or mate choice is determined by very simple rules. Females, for example, may be assumed either to compare their phenotype to that of a potential mate, preferring to mate with similar males (phenotype matching), or to possess preference genes that determine which male phenotype they prefer. These rules often do not reflect the mate-choice rules found in empirical studies. In this paper, we compare these two modes of female choice with various types of sexual imprinting. We examine the efficacy of different mate-choice behavior in causing divergence in male traits under simple deterministic one-locus population genetic models as well as under polygenic, individual-based simulations based on the models of Dieckmann and Doebeli (1999). We find that the inheritance mechanism of mate choice can have a large effect on the ease of sympatric speciation. When females imprint on their mothers, the result of the model is similar to phenotype matching, where speciation can occur fairly easily. When females imprint on their fathers or imprint obliquely, speciation becomes considerably less likely. Finally, when females rely on preference genes, male trait evolution occurs easily, but the correlation between trait and preference can be weak, and interpreting these results as speciation may be suspect.

  7. Ephemeral ecological speciation and the latitudinal biodiversity gradient.

    Science.gov (United States)

    Cutter, Asher D; Gray, Jeremy C

    2016-10-01

    The richness of biodiversity in the tropics compared to high-latitude parts of the world forms one of the most globally conspicuous patterns in biology, and yet few hypotheses aim to explain this phenomenon in terms of explicit microevolutionary mechanisms of speciation and extinction. We link population genetic processes of selection and adaptation to speciation and extinction by way of their interaction with environmental factors to drive global scale macroecological patterns. High-latitude regions are both cradle and grave with respect to species diversification. In particular, we point to a conceptual equivalence of "environmental harshness" and "hard selection" as eco-evolutionary drivers of local adaptation and ecological speciation. By describing how ecological speciation likely occurs more readily at high latitudes, with such nascent species especially prone to extinction by fusion, we derive the ephemeral ecological speciation hypothesis as an integrative mechanistic explanation for latitudinal gradients in species turnover and the net accumulation of biodiversity. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  8. Nuclear explosives testing readiness evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Valk, T.C.

    1993-09-01

    This readiness evaluation considers hole selection and characterization, verification, containment issues, nuclear explosive safety studies, test authorities, event operations planning, canister-rack preparation, site preparation, diagnostic equipment setup, device assembly facilities and processes, device delivery and insertion, emplacement, stemming, control room activities, readiness briefing, arming and firing, test execution, emergency response and reentry, and post event analysis to include device diagnostics, nuclear chemistry, and containment. This survey concludes that the LLNL program and its supporting contractors could execute an event within six months of notification, and a second event within the following six months, given the NET group`s evaluation and the following three restraints: (1) FY94 (and subsequent year) funding is essentially constant with FY93, (2) Preliminary work for the initial event is completed to the historical sic months status, (3) Critical personnel, currently working in dual use technologies, would be recallable as needed.

  9. Numerical modelling of the effect of using multi-explosives on the explosive forming of steel cones

    OpenAIRE

    De Vuyst, T; Kong, K.; Djordjevic, N.; Vignjevic, R.; Campbell, JC; Hughes, K

    2016-01-01

    Modelling and analysis of underwater explosive forming process by using FEM and SPH formulation is presented in this work. The explosive forming of a steel cone is studied. The model setup includes a low carbon steel plate, plate holder, forming die as well as water and C4 explosive. The effect of multiple explosives on rate of targets deformation has been studied. Four different multi-explosives models have been developed and compared to the single explosive model. The formability of the ste...

  10. Kinetic speciation and bioavailability of copper and nickel in mangrove sediments

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, P.; Chakraborty, S.; Ramteke, D.; Chennuri, K.

    An attempt was made to establish a mechanistic linkage between chemical speciation of copper and nickel, and their bioavailability in mangrove ecosystem. Kinetic speciation study was performed to determine the concentrations of labile metal...

  11. Rapid acceleration of plant speciation during the Anthropocene.

    Science.gov (United States)

    Thomas, Chris D

    2015-08-01

    Speciation rates need to be considered when estimating human impacts on the numbers of species on Earth, given that past mass extinctions have been followed by the accelerated origination of new taxa. Here, I suggest that the Anthropocene is already exhibiting a greatly accelerated plant speciation rate due to agriculture, horticulture, and the human-mediated transport of species, followed by hybridisation. For example, more new plant species have come into existence in Europe over the past three centuries than have been documented as becoming extinct over the same period, even though most new hybrid-origin species are likely to remain undetected. Current speciation rates are unusually high and they could be higher than during or after previous mass extinctions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Plutonium Speciation in Support of Oxidative-Leaching Demonstration Test

    Energy Technology Data Exchange (ETDEWEB)

    Sinkov, Sergey I.

    2007-10-31

    Bechtel National, Inc. (BNI) is evaluating the plutonium speciation in caustic solutions that reasonably represent the process streams from the oxidative-leaching demonstration test. Battelle—Pacific Northwest Division (PNWD) was contracted to develop a spectrophotometric method to measure plutonium speciation at submicromolar (< 10-6 M) concentrations in alkaline solutions in the presence of chromate and carbonate. Data obtained from the testing will be used to identify the oxidation state of Pu(IV), Pu(V), and Pu(VI) species, which potentially could exist in caustic leachates. Work was initially conducted under contract number 24590-101-TSA-W000-00004 satisfying the needs defined in Appendix C of the Research and Technology Plan TSS A-219 to evaluate the speciation of chromium, plutonium, and manganese before and after oxidative leaching. In February 2007, the contract mechanism was switched to Pacific Northwest National Laboratory (PNNL) Operating Contract MOA: 24590-QL-HC9-WA49-00001.

  13. Fast Chromatographic Method for Explosive Profiling

    Directory of Open Access Journals (Sweden)

    Pierre-Hugues Stefanuto

    2015-05-01

    Full Text Available Security control is becoming a major global issue in strategic locations, such as airports, official buildings, and transit stations. The agencies responsible for public security need powerful and sensitive tools to detect warfare agents and explosives. Volatile signature detection is one of the fastest and easiest ways to achieve this task. However, explosive chemicals have low volatility making their detection challenging. In this research, we developed and evaluated fast chromatographic methods to improve the characterization of volatile signatures from explosives samples. The headspace of explosives was sampled with solid phase micro-extraction fiber (SPME. Following this step, classical gas chromatography (GC and comprehensive two-dimensional GC (GC×GC were used for analysis. A fast GC approach allows the elution temperature of each analyte to be decreased, resulting in decreased thermal degradation of sensitive compounds (e.g., nitro explosives. Using fast GC×GC, the limit of detection is further decreased based on the cryo-focusing effect of the modulator. Sampling of explosives and chromatographic separation were optimized, and the methods then applied to commercial explosives samples. Implementation of fast GC methods will be valuable in the future for defense and security forensics applications.

  14. Towards accounting for dissolved iron speciation in global ocean models

    Directory of Open Access Journals (Sweden)

    A. Tagliabue

    2011-10-01

    Full Text Available The trace metal iron (Fe is now routinely included in state-of-the-art ocean general circulation and biogeochemistry models (OGCBMs because of its key role as a limiting nutrient in regions of the world ocean important for carbon cycling and air-sea CO2 exchange. However, the complexities of the seawater Fe cycle, which impact its speciation and bioavailability, are simplified in such OGCBMs due to gaps in understanding and to avoid high computational costs. In a similar fashion to inorganic carbon speciation, we outline a means by which the complex speciation of Fe can be included in global OGCBMs in a reasonably cost-effective manner. We construct an Fe speciation model based on hypothesised relationships between rate constants and environmental variables (temperature, light, oxygen, pH, salinity and assumptions regarding the binding strengths of Fe complexing organic ligands and test hypotheses regarding their distributions. As a result, we find that the global distribution of different Fe species is tightly controlled by spatio-temporal environmental variability and the distribution of Fe binding ligands. Impacts on bioavailable Fe are highly sensitive to assumptions regarding which Fe species are bioavailable and how those species vary in space and time. When forced by representations of future ocean circulation and climate we find large changes to the speciation of Fe governed by pH mediated changes to redox kinetics. We speculate that these changes may exert selective pressure on phytoplankton Fe uptake strategies in the future ocean. In future work, more information on the sources and sinks of ocean Fe ligands, their bioavailability, the cycling of colloidal Fe species and kinetics of Fe-surface coordination reactions would be invaluable. We hope our modeling approach can provide a means by which new observations of Fe speciation can be tested against hypotheses of the processes present in governing the ocean Fe cycle in an

  15. Possible incipient sympatric ecological speciation in blind mole rats (Spalax).

    Science.gov (United States)

    Hadid, Yarin; Tzur, Shay; Pavlícek, Tomáš; Šumbera, Radim; Šklíba, Jan; Lövy, Matěj; Fragman-Sapir, Ori; Beiles, Avigdor; Arieli, Ran; Raz, Shmuel; Nevo, Eviatar

    2013-02-12

    Sympatric speciation has been controversial since it was first proposed as a mode of speciation. Subterranean blind mole rats (Spalacidae) are considered to speciate allopatrically or peripatrically. Here, we report a possible incipient sympatric adaptive ecological speciation in Spalax galili (2n = 52). The study microsite (0.04 km(2)) is sharply subdivided geologically, edaphically, and ecologically into abutting barrier-free ecologies divergent in rock, soil, and vegetation types. The Pleistocene Alma basalt abuts the Cretaceous Senonian Kerem Ben Zimra chalk. Only 28% of 112 plant species were shared between the soils. We examined mitochondrial DNA in the control region and ATP6 in 28 mole rats from basalt and in 14 from chalk habitats. We also sequenced the complete mtDNA (16,423 bp) of four animals, two from each soil type. Remarkably, the frequency of all major haplotype clusters (HC) was highly soil-biased. HCI and HCII are chalk biased. HC-III was abundant in basalt (36%) but absent in chalk; HC-IV was prevalent in basalt (46.5%) but was low (20%) in chalk. Up to 40% of the mtDNA diversity was edaphically dependent, suggesting constrained gene flow. We identified a homologous recombinant mtDNA in the basalt/chalk studied area. Phenotypically significant divergences differentiate the two populations, inhabiting different soils, in adaptive oxygen consumption and in the amount of outside-nest activity. This identification of a possible incipient sympatric adaptive ecological speciation caused by natural selection indirectly refutes the allopatric alternative. Sympatric ecological speciation may be more prevalent in nature because of abundant and sharply abutting divergent ecologies.

  16. Phylogenetic analyses of the leaf beetle genus Galerucella: evidence for host switching at speciation?

    NARCIS (Netherlands)

    Borghuis, A.; Madsen, O.; Ouborg, N.J.; Groenendael, van J.

    2009-01-01

    It is still the subject of lively debate whether sympatric speciation is a general mode of speciation as opposed to allopatric speciation. In herbivorous insects, host switching, i.e. colonization of, and adaptation to, a new host by a herbivore, has been proposed as one of the driving mechanisms of

  17. Incomplete lineage sorting patterns among human, chimpanzee and orangutan suggest recent orangutan speciation and widespread selection

    DEFF Research Database (Denmark)

    Hobolth, Asger; Dutheil, Julien; Hawks, John

    2011-01-01

    and orangutans (the speciation time) from the genetic divergence time, and we find speciation to be as recent as 9-13 mya (contingent on the calibration point). The analyses provide further support for a recent speciation of human and chimpanzee at ~4 mya and a diverse ancestor of human and chimpanzee...

  18. Speciation and bioavailability of copper in Lake Tjeukemeer

    OpenAIRE

    Verweij, W.

    1991-01-01

    Chapter 1: introduction

    In this thesis an account is given of a research project dealing with the chemical speciation and bioavailability of copper in Lake Tjeukemeer, a lake in the north of the Netherlands. The reason for the initiation of this project was a lack of knowledge about the speciation of copper and the influence of copper on the behaviour of algae. This influence may be important, because copper is an essential element for algae, but becomes toxic whe...

  19. Metal explosion chambers: designing, manufacturing, application

    Science.gov (United States)

    Stoyanovskii, O. I.; Zlobin, B. S.; Shtertser, A. A.; Meshcheryakov, Y. P.

    2017-10-01

    Designing of explosion chambers is based on research investigations of the chamber body stress-strain state, which is determined by numerical computation and experimentally by the strain gage technique. Studies show that chamber bottoms are the most loaded elements, and maximal stresses arise in chamber poles. Increasing the shell thickness around poles by welding-in an insert is a simple and saving way to solve this problem. There are structural solutions, enabling reliable hermetic closure and preventing leakage of detonation products from the chamber. Explosion chambers are employed in scientific research and in different industrial applications: explosive welding and hardening, synthesis of new materials, disposal of expired ammunition, and etc.

  20. Wave dynamics of electric explosion in solids

    Science.gov (United States)

    Burkin, V. V.; Kuznetsova, N. S.; Lopatin, V. V.

    2009-05-01

    A mathematical model of an electric explosion is developed that consistently describes the expansion of the explosion channel with regard to the parameters of the discharge circuit of a high-voltage pulse generator, radiation, and propagation of stress waves in a solid. The dynamics of conversion of the stored energy to a wave and the formation of mechanical stresses due to electric explosion in a solid immersed in a liquid are considered. In the context of electro-discharge destruction of hard materials, the resulting stress field and the relationship between the discharge circuit parameters and characteristics of the wave are analyzed and the most efficient discharge modes are determined.

  1. The mathematical modeling of supernova explosion

    Science.gov (United States)

    Denisov, A. A.; Koldoba, A. V.; Poveshchenko, Iu. A.; Popov, Iu. P.; Chechetkin, V. M.

    An essentially two-dimensional model of supernova explosion is developed, with emphasis on the role of rotation in the thermonuclear explosion process. Attention is given to a star with a carbon-oxygen core, which is transformed into a nickel core as a result of nuclear reaction. In this case, the development of thermal instability leads to the generation of a detonation wave propagating to the periphery of the star. Rapid rotation is found to produce a strong asymmetry of the hydrodynamic processs of the explosion.

  2. Water waves generated by underwater explosion

    CERN Document Server

    Mehaute, Bernard Le

    1996-01-01

    This is the first book on explosion-generated water waves. It presents the theoretical foundations and experimental results of the generation and propagation of impulsively generated waves resulting from underwater explosions. Many of the theories and concepts presented herein are applicable to other types of water waves, in particular, tsunamis and waves generated by the fall of a meteorite. Linear and nonlinear theories, as well as experimental calibrations, are presented for cases of deep and shallow water explosions. Propagation of transient waves on dissipative, nonuniform bathymetries to

  3. On the Violence of High Explosive Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Tarver, C M; Chidester, S K

    2004-02-09

    High explosive reactions can be caused by three general energy deposition processes: impact ignition by frictional and/or shear heating; bulk thermal heating; and shock compression. The violence of the subsequent reaction varies from benign slow combustion to catastrophic detonation of the entire charge. The degree of violence depends on many variables, including the rate of energy delivery, the physical and chemical properties of the explosive, and the strength of the confinement surrounding the explosive charge. The current state of experimental and computer modeling research on the violence of impact, thermal, and shock-induced reactions is reviewed.

  4. Explosive Detection and Identification by PGNAA

    Energy Technology Data Exchange (ETDEWEB)

    E.H. Seabury; A.J. Caffrey

    2004-11-01

    The goal of this project was to determine the feasibility of using field-portable prompt gamma-ray neutron activation analysis (PGNAA) to detect and identify explosives in improvised nuclear devices (INDs). The studies were carried out using the Monte Carlo N-Particle (MCNP) code developed at Los Alamos National Laboratory. The model results were tested experimentally using explosive simulants and the PINS PGNAA system developed at Idaho National Engineering and Environmental Laboratory (INEEL). The results of the MCNP calculations and PINS measurements are presented in this report. The calculations and measurements were in good agreement and indicate that most explosives are readily distinguishable from one another.

  5. Emergence of Xin demarcates a key innovation in heart evolution.

    Directory of Open Access Journals (Sweden)

    Shaun E Grosskurth

    2008-08-01

    Full Text Available The mouse Xin repeat-containing proteins (mXinalpha and mXinbeta localize to the intercalated disc in the heart. mXinalpha is able to bundle actin filaments and to interact with beta-catenin, suggesting a role in linking the actin cytoskeleton to N-cadherin/beta-catenin adhesion. mXinalpha-null mouse hearts display progressively ultrastructural alterations at the intercalated discs, and develop cardiac hypertrophy and cardiomyopathy with conduction defects. The up-regulation of mXinbeta in mXinalpha-deficient mice suggests a partial compensation for the loss of mXinalpha. To elucidate the evolutionary relationship between these proteins and to identify the origin of Xin, a phylogenetic analysis was done with 40 vertebrate Xins. Our results show that the ancestral Xin originated prior to the emergence of lamprey and subsequently underwent gene duplication early in the vertebrate lineage. A subsequent teleost-specific genome duplication resulted in most teleosts encoding at least three genes. All Xins contain a highly conserved beta-catenin-binding domain within the Xin repeat region. Similar to mouse Xins, chicken, frog and zebrafish Xins also co-localized with beta-catenin to structures that appear to be the intercalated disc. A putative DNA-binding domain in the N-terminus of all Xins is strongly conserved, whereas the previously characterized Mena/VASP-binding domain is a derived trait found only in Xinalphas from placental mammals. In the C-terminus, Xinalphas and Xinbetas are more divergent relative to each other but each isoform from mammals shows a high degree of within-isoform sequence identity. This suggests different but conserved functions for mammalian Xinalpha and Xinbeta. Interestingly, the origin of Xin ca. 550 million years ago coincides with the genesis of heart chambers with complete endothelial and myocardial layers. We postulate that the emergence of the Xin paralogs and their functional differentiation may have played a key role in the evolutionary development of the heart.

  6. 30 CFR 75.1314 - Sheathed explosive units.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Sheathed explosive units. 75.1314 Section 75... explosive units. (a) A separate instantaneous detonator shall be used to fire each sheathed explosive unit. (b) Sheathed explosive units shall be primed and placed in position for firing only by a qualified...

  7. Detection of Nuclear Explosions Using Infrasound Techniques

    National Research Council Canada - National Science Library

    Christie, D. R; Kennett, B. L

    2007-01-01

    The performance of typical IMS infrasound monitoring stations has been examined in detail in order to evaluate the detection capability of the global network for regional and distant nuclear explosions...

  8. Isolator fragmentation and explosive initiation tests

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, Peter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rae, Philip John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Foley, Timothy J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Novak, Alan M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Armstrong, Christopher Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Baca, Eva V. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gunderson, Jake Alfred [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-19

    Three tests were conducted to evaluate the effects of firing an isolator in proximity to a barrier or explosive charge. The tests with explosive were conducted without a barrier, on the basis that since any barrier will reduce the shock transmitted to the explosive, bare explosive represents the worst-case from an inadvertent initiation perspective. No reaction was observed. The shock caused by the impact of a representative plastic material on both bare and cased PBX 9501 is calculated in the worst-case, 1-D limit, and the known shock response of the HE is used to estimate minimum run-to-detonation lengths. The estimates demonstrate that even 1-D impacts would not be of concern and that, accordingly, the divergent shocks due to isolator fragment impact are of no concern as initiating stimuli.

  9. Electronic cigarette explosions involving the oral cavity.

    Science.gov (United States)

    Harrison, Rebecca; Hicklin, David

    2016-11-01

    The use of electronic cigarettes (e-cigarettes) is a rapidly growing trend throughout the United States. E-cigarettes have been linked to the risk of causing explosion and fire. Data are limited on the associated health hazards of e-cigarette use, particularly long-term effects, and available information often presents conflicting conclusions. In addition, an e-cigarette explosion and fire can pose a unique treatment challenge to the dental care provider because the oral cavity may be affected heavily. In this particular case, the patient's injuries included intraoral burns, luxation injuries, and alveolar fractures. This case report aims to help clinicians gain an increased knowledge about e-cigarette design, use, and risks; discuss the risk of spontaneous failure and explosion of e-cigarettes with patients; and understand the treatment challenges posed by an e-cigarette explosion. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

  10. Explosives Detection and Identification by PGNAA

    Energy Technology Data Exchange (ETDEWEB)

    E. H. Seabury; A. J. Caffrey

    2006-04-01

    The feasibility of using field-portable prompt gamma-ray neutron activation analysis (PGNAA) to detect and identify explosives in improvised nuclear devices has been studied computationally, using the Monte Carlo N-Particle (MCNP) code developed at Los Alamos National Laboratory. The Monte Carlo results, in turn were tested experimentally using explosive simulants and the PINS PGNAA system developed at Idaho National Laboratory (INL). The results of the MCNP calculations and PINS measurements have been previously reported. In this report we describe measurements performed on actual explosives and compare the results with calculations. The calculations and measurements were in good agreement and indicate that most explosives are readily distinguishable from one another by PGNAA

  11. Highly explosive nanosilicon-based composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Clement, D.; Diener, J.; Gross, E.; Kuenzner, N.; Kovalev, D. [Technical University of Munich, Physics Department, James-Franck-Str., 85747 Garching (Germany); Timoshenko, V.Yu. [Moscow State M.V. Lomonosov University, Physics Department, 119899 Moscow (Russian Federation)

    2005-06-01

    We present a highly explosive binary system based on porous silicon layers with their pores filled with solid oxidizers. The porous layers are produced by a standard electrochemical etching process and exhibit properties that are different from other energetic materials. Its production is completely compatible with the standard silicon technology and full bulk silicon wafers can be processed and therefore a large number of explosive elements can be produced simultaneously. The application-relevant parameters: the efficiency and the long-term stability of various porous silicon/oxidizer systems have been studied in details. Structural properties of porous silicon, its surface termination, the atomic ratio of silicon to oxygen and the chosen oxidizers were optimized to achieve the highest efficiency of the explosive reaction. This explosive system reveals various possible applications in different industrial fields, e.g. as a novel, very fast airbag igniter. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  12. Hamiltonian approach for explosive percolation.

    Science.gov (United States)

    Moreira, A A; Oliveira, E A; Reis, S D S; Herrmann, H J; Andrade, J S

    2010-04-01

    We present a cluster growth process that provides a clear connection between equilibrium statistical mechanics and an explosive percolation model similar to the one recently proposed by D. Achlioptas [Science 323, 1453 (2009)]. We show that the following two ingredients are sufficient for obtaining an abrupt (first-order) transition in the fraction of the system occupied by the largest cluster: (i) the size of all growing clusters should be kept approximately the same, and (ii) the inclusion of merging bonds (i.e., bonds connecting vertices in different clusters) should dominate with respect to the redundant bonds (i.e., bonds connecting vertices in the same cluster). Moreover, in the extreme limit where only merging bonds are present, a complete enumeration scheme based on treelike graphs can be used to obtain an exact solution of our model that displays a first-order transition. Finally, the presented mechanism can be viewed as a generalization of standard percolation that discloses a family of models with potential application in growth and fragmentation processes of real network systems.

  13. Regional Seismic Methods of Identifying Explosions

    Science.gov (United States)

    Walter, W. R.; Ford, S. R.; Pasyanos, M.; Pyle, M. L.; Hauk, T. F.

    2013-12-01

    A lesson from the 2006, 2009 and 2013 DPRK declared nuclear explosion Ms:mb observations is that our historic collection of data may not be representative of future nuclear test signatures (e.g. Selby et al., 2012). To have confidence in identifying future explosions amongst the background of other seismic signals, we need to put our empirical methods on a firmer physical footing. Here we review the two of the main identification methods: 1) P/S ratios and 2) Moment Tensor techniques, which can be applied at the regional distance (200-1600 km) to very small events, improving nuclear explosion monitoring and confidence in verifying compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Amplitude ratios of seismic P-to-S waves at sufficiently high frequencies (~>2 Hz) can identify explosions among a background of natural earthquakes (e.g. Walter et al., 1995). However the physical basis for the generation of explosion S-waves, and therefore the predictability of this P/S technique as a function of event properties such as size, depth, geology and path, remains incompletely understood. Calculated intermediate period (10-100s) waveforms from regional 1-D models can match data and provide moment tensor results that separate explosions from earthquakes and cavity collapses (e.g. Ford et al. 2009). However it has long been observed that some nuclear tests produce large Love waves and reversed Rayleigh waves that complicate moment tensor modeling. Again the physical basis for the generation of these effects from explosions remains incompletely understood. We are re-examining regional seismic data from a variety of nuclear test sites including the DPRK and the former Nevada Test Site (now the Nevada National Security Site (NNSS)). Newer relative amplitude techniques can be employed to better quantify differences between explosions and used to understand those differences in term of depth, media and other properties. We are also making use of the Source Physics

  14. Effects of Explosions in Underground Magazines

    Science.gov (United States)

    1989-10-01

    values of confined explosion gas pressure for PETN in air at sea level.. 23 2.3 An example of the scaling procedure employed to predict peak pressures in...compared to -thoso currently eowployed in the 1980 Department of )fise, O0D) - Amunititon and Explosivo Safety Standards (Refotetce 1). The details are...comparisons of Proctor’s (1974, Reference 5) theoretical predictions with experimontal data for TNT and PETN explosives. Stromsoo (Reference 8) calculated

  15. Non-shock initiation of explosives

    National Research Council Canada - National Science Library

    Asay, B. W

    2010-01-01

    ... explosives. Before 1942, explosives were used in munitions and commercial pursuits that demanded proper chemistry and confinement for the necessary effect, but little else. The needs and requirements of the Manhattan project were of a much more precise and specific nature. Spatial and temporal specifications were reduced from centimeters and milliseconds to micrometers and nanoseconds. New theory and computational tools were required along with a raft of new experimental techniques and novel ways of interpreting...

  16. Weapons Experiments Division Explosives Operations Overview

    Energy Technology Data Exchange (ETDEWEB)

    Laintz, Kenneth E. [Los Alamos National Laboratory

    2012-06-19

    Presentation covers WX Division programmatic operations with a focus on JOWOG-9 interests. A brief look at DARHT is followed by a high level overview of explosives research activities currently being conducted within in the experimental groups of WX-Division. Presentation covers more emphasis of activities and facilities at TA-9 as these efforts have been more traditionally aligned with ongoing collaborative explosive exchanges covered under JOWOG-9.

  17. Explosively Bonded Gun Tube Liner Development

    Science.gov (United States)

    2015-04-01

    some concern was the occasional appearance of iron-Ta intermetallics near the liner-steel interface. This is a brittle phase and subject to...Montgomery JS, de Rosset WS. Examination of intermetallic phases and residual stresses resulting from explosive bonding of refractory metal gun tube...caliber smoothbore gun tube. The metallic bond produced by explosive bonding is extremely strong and presumably would keep the liner in place. In Phase

  18. Grain-scale Dynamics in Explosives

    Energy Technology Data Exchange (ETDEWEB)

    Reaugh, J E

    2002-09-30

    High explosives can have reactions to external stimuli that range from mild pressure bursts to full detonation. The ability to predict these responses is important for understanding the performance as well as the safety and reliability of these important materials. At present, we have only relatively simple phenomenological computational models for the behavior of high explosives under these conditions. These models are limited by the assumption that the explosive can be treated as homogeneous. In reality the explosive is a highly heterogeneous composite of irregular crystallites and plastic binder. The heterogeneous nature of explosives is responsible for many of their unique mechanical and chemical properties. We use computational models to simulate the response of explosives to external mechanical stimuli at the grain-scale level. The ultimate goal of this work is to understand the detailed processes involved with the material response, so that we can develop realistic material models, which can be used in a hydrodynamics/multi-physics code to model real systems. The new material models will provide a more realistic description of the explosive system during the most critical period of ignition and initiation. The focus of this work is to use the results of grain-scale simulations to develop an advanced macroscopic reactive flow model that is consistent with our understanding of the grain-scale details, and that can incorporate such information quantitatively. The objective is to connect changes to observed properties of the explosive (grain size distribution, binder thickness distribution, void shape, size, and separation distribution, binder mechanical properties, etc.) with predictions of the resulting sensitivity and performance.

  19. Book Review The Speciation and Biogeography of Birds By Ian ...

    African Journals Online (AJOL)

    Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Book Review The Speciation and Biogeography of Birds By Ian Newton (2003). Rauri CK Bowie. Abstract. Academic Press, London, Linacre House, Jordan Hill, Oxford OX2 8DP, UK, e-mail k.beran@elsevier.com 668 pages, hardcover. ISBN 012517375X ...

  20. Speciation of Heavy Metals in Sediment of Agbabu Bitumen deposit ...

    African Journals Online (AJOL)

    Michael Horsfall

    soils and water from the vicinity of Agbabu bitumen field (Olajire et al., 2007), and solvent extraction of vanadium from Nigerian bitumen (Oguntimehin and. Ipinmoroti, 2007). The need for this research arose because no study has been reported on the speciation of metals in sediment of Agbabu bitumen deposit environment ...

  1. Bioavailability of iron speciations and EDTA-iron complexes for ...

    African Journals Online (AJOL)

    Selin

    2012-01-19

    Jan 19, 2012 ... Full Length Research Paper. Bioavailability of iron speciations and EDTA-iron .... Diatoms are particularly important in the export of organic matter to the deep ocean because of their large size and ... having a costal centric diatom in the size range of 5 to 20. µm. The aim of this study was to determine the.

  2. Evolution and the latitudinal diversity gradient: speciation, extinction and biogeography.

    Science.gov (United States)

    Mittelbach, Gary G; Schemske, Douglas W; Cornell, Howard V; Allen, Andrew P; Brown, Jonathan M; Bush, Mark B; Harrison, Susan P; Hurlbert, Allen H; Knowlton, Nancy; Lessios, Harilaos A; McCain, Christy M; McCune, Amy R; McDade, Lucinda A; McPeek, Mark A; Near, Thomas J; Price, Trevor D; Ricklefs, Robert E; Roy, Kaustuv; Sax, Dov F; Schluter, Dolph; Sobel, James M; Turelli, Michael

    2007-04-01

    A latitudinal gradient in biodiversity has existed since before the time of the dinosaurs, yet how and why this gradient arose remains unresolved. Here we review two major hypotheses for the origin of the latitudinal diversity gradient. The time and area hypothesis holds that tropical climates are older and historically larger, allowing more opportunity for diversification. This hypothesis is supported by observations that temperate taxa are often younger than, and nested within, tropical taxa, and that diversity is positively correlated with the age and area of geographical regions. The diversification rate hypothesis holds that tropical regions diversify faster due to higher rates of speciation (caused by increased opportunities for the evolution of reproductive isolation, or faster molecular evolution, or the increased importance of biotic interactions), or due to lower extinction rates. There is phylogenetic evidence for higher rates of diversification in tropical clades, and palaeontological data demonstrate higher rates of origination for tropical taxa, but mixed evidence for latitudinal differences in extinction rates. Studies of latitudinal variation in incipient speciation also suggest faster speciation in the tropics. Distinguishing the roles of history, speciation and extinction in the origin of the latitudinal gradient represents a major challenge to future research.

  3. Plant evolution: pulses of extinction and speciation in gymnosperm diversity.

    Science.gov (United States)

    Davis, Charles C; Schaefer, Hanno

    2011-12-20

    Living gymnosperms represent the survivors of ancient seed plant lineages whose fossil record reaches back 270 million years. Two recent studies find that recent pulses of extinction and speciation have shaped today's gymnosperm diversity, contradicting the widespread assumption that gymnosperms have remained largely unchanged for tens of millions of years. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Underappreciated Consequences of Phenotypic Plasticity for Ecological Speciation

    Directory of Open Access Journals (Sweden)

    Benjamin M. Fitzpatrick

    2012-01-01

    Full Text Available Phenotypic plasticity was once seen primarily as a constraint on adaptive evolution or merely a nuisance by geneticists. However, some biologists promote plasticity as a source of novelty and a factor in evolution on par with mutation, drift, gene flow, and selection. These claims are controversial and largely untested, but progress has been made on more modest questions about effects of plasticity on local adaptation (the first component of ecological speciation. Adaptive phenotypic plasticity can be a buffer against divergent selection. It can also facilitate colonization of new niches and rapid divergent evolution. The influence of non-adaptive plasticity has been underappreciated. Non-adaptive plasticity, too can interact with selection to promote or inhibit genetic differentiation. Finally, phenotypic plasticity of reproductive characters might directly influence evolution of reproductive isolation (the second component of ecological speciation. Plasticity can cause assortative mating, but its influence on gene flow ultimately depends on maintenance of environmental similarity between parents and offspring. Examples of plasticity influencing mating and habitat choice suggest that this, too, might be an underappreciated factor in speciation. Plasticity is an important consideration for studies of speciation in nature, and this topic promises fertile ground for integrating developmental biology with ecology and evolution.

  5. The molecular basis of speciation: from patterns to processes, rules ...

    Indian Academy of Sciences (India)

    However, the large genetic and reproductive differences between taxa and the multi-factorial nature of each rule have made it difficult to ascribe general mechanisms. Here, we review the extensive progress made since Darwin on understanding the origin of species. We revisit the rules of speciation, regarding them as ...

  6. Reconstructing the History of Selection during Homoploid Hybrid Speciation

    Science.gov (United States)

    Karrenberg, Sophie; Lexer, Christian; Rieseberg, Loren H.

    2008-01-01

    This study aims to identify selection pressures during the historical process of homoploid hybrid speciation in three Helianthus (sunflower) hybrid species. If selection against intrinsic genetic incompatibilities (fertility selection) or for important morphological/ecological traits (phenotypic selection) were important in hybrid speciation, we would expect this selection to have influenced the parentage of molecular markers or chromosomal segments in the hybrid species’ genomes. To infer past selection, we compared the parentage of molecular markers in high-density maps of the three hybrid species with predicted marker parentage from an analysis of fertility selection in artificial hybrids and from the directions of quantitative trait loci effects with respect to the phenotypes of the hybrid species. Multiple logistic regression models were consistent with both fertility and phenotypic selection in all three species. To further investigate traits under selection, we used a permutation test to determine whether marker parentage predicted from groups of functionally related traits differed from neutral expectations. Our results suggest that trait groups associated with ecological divergence were under selection during hybrid speciation. This study presents a new method to test for selection and supports earlier claims that fertility selection and phenotypic selection on ecologically relevant traits have operated simultaneously during sunflower hybrid speciation. PMID:17479459

  7. Latitude, elevational climatic zonation and speciation in New World vertebrates.

    Science.gov (United States)

    Cadena, Carlos Daniel; Kozak, Kenneth H; Gómez, Juan Pablo; Parra, Juan Luis; McCain, Christy M; Bowie, Rauri C K; Carnaval, Ana C; Moritz, Craig; Rahbek, Carsten; Roberts, Trina E; Sanders, Nathan J; Schneider, Christopher J; VanDerWal, Jeremy; Zamudio, Kelly R; Graham, Catherine H

    2012-01-07

    Many biodiversity hotspots are located in montane regions, especially in the tropics. A possible explanation for this pattern is that the narrow thermal tolerances of tropical species and greater climatic stratification of tropical mountains create more opportunities for climate-associated parapatric or allopatric speciation in the tropics relative to the temperate zone. However, it is unclear whether a general relationship exists among latitude, climatic zonation and the ecology of speciation. Recent taxon-specific studies obtained different results regarding the role of climate in speciation in tropical versus temperate areas. Here, we quantify overlap in the climatic distributions of 93 pairs of sister species of mammals, birds, amphibians and reptiles restricted to either the New World tropics or to the Northern temperate zone. We show that elevational ranges of tropical- and temperate-zone species do not differ from one another, yet the temperature range experienced by species in the temperate zone is greater than for those in the tropics. Moreover, tropical sister species tend to exhibit greater similarity in their climatic distributions than temperate sister species. This pattern suggests that evolutionary conservatism in the thermal niches of tropical taxa, coupled with the greater thermal zonation of tropical mountains, may result in increased opportunities for allopatric isolation, speciation and the accumulation of species in tropical montane regions. Our study exemplifies the power of combining phylogenetic and spatial datasets of global climatic variation to explore evolutionary (rather than purely ecological) explanations for the high biodiversity of tropical montane regions.

  8. Geometry, charge distribution, and surface speciation of phosphate on goethite.

    NARCIS (Netherlands)

    Rahnemaie, R.; Hiemstra, T.; Riemsdijk, van W.H.

    2007-01-01

    The surface speciation of phosphate has been evaluated with surface complexation modeling using an interfacial charge distribution (CD) approach based on ion adsorption and ordering of interfacial water. In the CD model, the charge of adsorbed ions is distributed over two electrostatic potentials in

  9. Speciation of Heavy Metals in Sediment of Agbabu Bitumen deposit ...

    African Journals Online (AJOL)

    Speciation of heavy metals Cu, Cd, Pb, Ni, Zn, Mn, Fe, Cr and Hg was carried out on sediment of Agbabu with a sequential extraction procedure in the dry and rainy seasons of year 2008. Hg was not detected in all the fractions in the two seasons. In the dry season, all the metals were mostly abundant in Fraction-5, however ...

  10. Comparative Studies of the Speciation Patterns of Nickel and ...

    African Journals Online (AJOL)

    NJD

    2005-01-31

    Jan 31, 2005 ... Results of speciation studies of nickel and chromium in wastewater, surface and groundwater systems using flame atomic absorption spectrometry (FAAS), graphite furnace atomic absorption spectrometry (GFAAS) and differential pulse adsorptive cathodic stripping voltammetry (DPAdCSV) are presented.

  11. speciation of heavy metals in street dust samples from sakarya

    African Journals Online (AJOL)

    Preferred Customer

    SPECIATION OF HEAVY METALS IN STREET DUST SAMPLES FROM SAKARYA. I. ORGANIZED INDUSTRIAL DISTRICT USING THE BCR SEQUENTIAL. EXTRACTION PROCEDURE BY ICP-OES. Nilufer Ozcan and Huseyin Altundag*. Sakarya University, Faculty of Arts and Sciences, Department of Chemistry, 54187, ...

  12. Speciation and determination of priority metals in sediments of Oyun ...

    African Journals Online (AJOL)

    This work was carried out to determine the concentrations, bioavailability and mobility of priority metals in sediments of Oyun River, Sango, Ilorin, Nigeria. The river sediments were sampled at six selected locations and the samples were analyzed for some certain priority metals to determine the concentration, speciation and ...

  13. Heavy metal speciation and their accumulation in sediments of Lake ...

    African Journals Online (AJOL)

    Several sediment samples in Lake Burullus have been affected by the discharges of heavy metals through different drains. The study aimed to analyze the chemical speciation of these metals. In particular, the chemical forms of Cd, Cu, Fe, Mn, Pb and Zn in sediments collected in spring season were studied using a ...

  14. Comparative Studies of the Speciation Patterns of Nickel and ...

    African Journals Online (AJOL)

    Results of speciation stdies of nickel and chromium in wastewater, surface and groundwater systems using flame atomic absorption spectrometry (FAAS), graphite furnace atomic absorption spectrometry (GFAAS) and differential pulse adsorptive cathodic stripping voltammetry (DPAdCSV) are presented. Dimethylglyoxime ...

  15. Speciation and migration of 129I in soil profiles

    DEFF Research Database (Denmark)

    Luo, Maoyi; Hou, Xiaolin; Zhou, Weijian

    2013-01-01

    A method has been developed for speciation analysis of ultra low level 129I in soil using sequential extraction combined with coprecipitation for separation of carrier free iodine and AMS measurement of 129I. Two loess profiles collected from northwest China were analyzed for species of 129I...

  16. Sympatric speciation in Yponomeuta: No evidence for host plant fidelity

    NARCIS (Netherlands)

    Bakker, A.C.; Roessingh, P.; Menken, S.B.J.

    2008-01-01

    According to sympatric speciation theory, adaptation to different host plants is expected to pleiotropically lead to assortative mating, an important factor in the reduction of gene flow between the diverging subpopulations. This scenario predicts mating on and oviposition preference for the

  17. Fractionation, characterization and speciation of heavy metals in ...

    African Journals Online (AJOL)

    Speciation of heavy metals in soils determines the availability for metals for plant uptake and potential for contamination of groundwater following application of composts to agricultural lands. Methods used to characterize heavy metals in solid phase of composts and compost amended soils include physical fractionation ...

  18. Speciation of Iberian diving beetles in Pleistocene refugia (Coleoptera, Dytiscidae).

    Science.gov (United States)

    Ribera, Ignacio; Vogler, Alfried P

    2004-01-01

    The Mediterranean basin is an area of high diversity and endemicity, but the age and origin of its fauna are still largely unknown. Here we use species-level phylogenies based on approximately 1300 base pairs of the genes 16S rRNA and cytochrome oxidase I to establish the relationships of 27 of the 34 endemic Iberian species of diving beetles in the family Dytiscidae, and to investigate their level of divergence. Using a molecular clock approach, 18-19 of these species were estimated to be of Pleistocene origin, with four to six of them from the Late Pleistocene ( approximately 100 000 years). A second, lower speciation frequency peak was assigned to Late Miocene or Early Pliocene. Analysis of the distributional ranges showed that endemic species placed in the tip nodes of the trees are significantly more likely to be allopatric with their sisters than endemic species at lower node levels. Allopatric sister species are also significantly younger than sympatric clades, in agreement with an allopatric mode of speciation and limited subsequent range movement. These results strongly suggest that for some taxa Iberian populations were isolated during the Pleistocene long enough to speciate, and apparently did not expand their ranges to recolonize areas north of the Pyrenees. This is in contradiction to observations from fossil beetles in areas further north, which document large range movements associated with the Pleistocene glacial cycles hypothesized to suppress population isolation and allopatric speciation.

  19. Speciation of Water-Extractable Organic Nutrients in Grassland Soils

    NARCIS (Netherlands)

    Ros, G.H.; Tschudy, T.C.; Chardon, W.J.; Temminghoff, E.J.M.; Salm, van der C.; Koopmans, G.F.

    2010-01-01

    The release of dissolved organic matter (DOM) from agricultural land can have a large impact on the transport of N and phosphorus (P) to surface waters leading to water quality impairment. The speciation of DOM in agricultural grassland soils has received little attention thus far. Quantification of

  20. Electrochemical metal speciation in natural and model polyelectrolyte systems

    NARCIS (Netherlands)

    Hoop, van den M.A.G.T.

    1994-01-01

    The purpose of the research described in this thesis was to examine the applicability of electro-analytical techniques in obtaining information on the speciation of metals, i.e. their distribution over different physico-chemical forms, in aquatic systems containing charged macromolecules.

  1. Sympatric speciation in a genus of marine reef fishes.

    Science.gov (United States)

    Crow, Karen D; Munehara, Hiroyuki; Bernardi, Giacomo

    2010-05-01

    Sympatric speciation has been contentious since its inception, yet is increasingly recognized as important based on accumulating theoretical and empirical support. Here, we present a compelling case of sympatric speciation in a taxon of marine reef fishes using a comparative and mechanistic approach. Hexagrammos otakii and H. agrammus occur in sympatry throughout their ranges. Molecular sequence data from six loci, with complete sampling of the genus, support monophyly of these sister species. Although hybridization occurs frequently with an allopatric congener in an area of slight distributional overlap, we found no F(1) hybrids between the focal sympatric taxa throughout their coextensive ranges. We present genetic evidence for complete reproductive isolation based on SNP analysis of 382 individuals indicating fixed polymorphisms, with no shared haplotypes or genotypes, between sympatric species. To address questions of speciation, we take a mechanistic approach and directly compare aspects of reproductive isolation between allopatric and sympatric taxa both in nature and in the laboratory. We conclude that the buildup of reproductive isolation is strikingly different in sympatric vs. allopatric taxa, consistent with theoretical predictions. Lab reared hybrids from allopatric species crosses exhibit severe fitness effects in the F(1) or backcross generation. No intrinsic fitness effects are observed in F(1) hybrids from sympatric species pairs, however these treatments exhibited reduced fertilization success and complete pre-mating isolation is implied in nature because F(1) hybrid adults do not occur. Our study addresses limitations of previous studies and supports new criteria for inferring sympatric speciation.

  2. Investigation on speciation and pollution index of heavy metals in ...

    African Journals Online (AJOL)

    This study investigated the chemical speciation of Cd, Cr, Cu, Ni and Pb and their contamination/pollution indices in the sediment of River Ala in Akure, Nigeria. Sediment samples taken along the course of the river were subjected to Sequential Extraction Technique and the heavy metals were quantified using atomic ...

  3. Speciation of Fe in the Eastern North Atlantic Ocean

    NARCIS (Netherlands)

    Thuroczy, C-E; Gerringa, L. J. A.; Klunder, M. B.; Middag, R.; Laan, P.; Timmermans, K. R.; de Baar, H. J. W.

    2010-01-01

    In the Eastern North Atlantic Ocean iron (Fe) speciation was investigated in three size fractions the dissolvable from unfiltered samples the dissolved fraction (0 2 mu m) fraction were unsaturated with Fe with respect to the dissolved fraction thus these waters had a scavenging potential Crown

  4. Selenium speciation and extractability in Dutch agricultural soils

    NARCIS (Netherlands)

    Supriatin, Supriatin; Weng, Liping; Comans, Rob N.J.

    2015-01-01

    The study aimed to understand selenium (Se) speciation and extractability in Dutch agricultural soils. Top soil samples were taken from 42 grassland fields and 41 arable land fields in the Netherlands. Total Se contents measured in aqua regia were between 0.12 and 1.97mgkg-1(on average

  5. The secondary contact phase of allopatric speciation in Darwin's finches

    Science.gov (United States)

    Grant, Peter R.; Grant, B. Rosemary

    2009-01-01

    Speciation, the process by which two species form from one, involves the development of reproductive isolation of two divergent lineages. Here, we report the establishment and persistence of a reproductively isolated population of Darwin's finches on the small Galápagos Island of Daphne Major in the secondary contact phase of speciation. In 1981, an immigrant medium ground finch (Geospiza fortis) arrived on the island. It was unusually large, especially in beak width, sang an unusual song, and carried some Geospiza scandens alleles. We followed the fate of this individual and its descendants for seven generations over a period of 28 years. In the fourth generation, after a severe drought, the lineage was reduced to a single brother and sister, who bred with each other. From then on this lineage, inheriting unusual song, morphology, and a uniquely homozygous marker allele, was reproductively isolated, because their own descendants bred with each other and with no other member of the resident G. fortis population. These observations agree with some expectations of an ecological theory of speciation in that a barrier to interbreeding arises as a correlated effect of adaptive divergence in morphology. However, the important, culturally transmitted, song component of the barrier appears to have arisen by chance through an initial imperfect copying of local song by the immigrant. The study reveals additional stochastic elements of speciation, in which divergence is initiated in allopatry; immigration to a new area of a single male hybrid and initial breeding with a rare hybrid female. PMID:19918081

  6. Speciation and bioavailability of copper in Lake Tjeukemeer

    NARCIS (Netherlands)

    Verweij, W.

    1991-01-01

    Chapter 1: introduction

    In this thesis an account is given of a research project dealing with the chemical speciation and bioavailability of copper in Lake Tjeukemeer, a lake in the north of the Netherlands. The reason for the initiation of this project was a lack of

  7. Speciation and phase separation of water in quartz (A review ...

    African Journals Online (AJOL)

    Speciation, supersaturation and phase separation of water in hydrothermal grown (synthetic) quartz cryst-als have been examined as fundamental issues determining clustering, nucleation and bubble formation, which have profound influence on hydrolytic weakening, dislocation-bubble interactions and high temperature ...

  8. Speciational view of macroevolution: Are micro and macroevolution decoupled?

    Science.gov (United States)

    Schwämmle, V.; Brigatti, E.

    2006-07-01

    We introduce a simple computational model that, with microscopic dynamics driven by natural selection and mutation alone, allows the description of true speciation events. A statistical analysis of the evolutionary tree so generated captures realistic features showing power laws for frequency distributions in time and size. Finally, some possible interpretations of the absence of punctuated dynamics with mass extinctions are worked out.

  9. saosakwe@yahoo.com Chemical Speciation and Mobility of Some ...

    African Journals Online (AJOL)

    Michael Horsfall

    Chemical Speciation and Mobility of Some Heavy Metals in Soils around Automobile. Waste Dumpsites in Northern ... dumpsites in Northern part of Niger Delta was assessed using Tessier et al. five syteps sequential chemical extraction procedure. ...... Traceinorganics in water Gould, R.F. (ed) Advances in Chemistry Series ...

  10. What factors control superficial lava dome explosivity?

    Science.gov (United States)

    Boudon, Georges; Balcone-Boissard, Hélène; Villemant, Benoît; Morgan, Daniel J

    2015-09-30

    Dome-forming eruption is a frequent eruptive style and a major hazard on numerous volcanoes worldwide. Lava domes are built by slow extrusion of degassed, viscous magma and may be destroyed by gravitational collapse or explosion. The triggering of lava dome explosions is poorly understood: here we propose a new model of superficial lava-dome explosivity based upon a textural and geochemical study (vesicularity, microcrystallinity, cristobalite distribution, residual water contents, crystal transit times) of clasts produced by key eruptions. Superficial explosion of a growing lava dome may be promoted through porosity reduction caused by both vesicle flattening due to gas escape and syn-eruptive cristobalite precipitation. Both processes generate an impermeable and rigid carapace allowing overpressurisation of the inner parts of the lava dome by the rapid input of vesiculated magma batches. The relative thickness of the cristobalite-rich carapace is an inverse function of the external lava dome surface area. Explosive activity is thus more likely to occur at the onset of lava dome extrusion, in agreement with observations, as the likelihood of superficial lava dome explosions depends inversely on lava dome volume. This new result is of interest for the whole volcanological community and for risk management.

  11. Statistical estimation of loads from gas explosions

    Energy Technology Data Exchange (ETDEWEB)

    Hoeiset, Stian

    1998-12-31

    In the design of structures in the offshore and process industries, the possibility of a gas explosion must always be considered. The main uncertainties in computerized simulation of gas explosions are the assumptions of the gas cloud, the location of the ignition point and the properties of the simulator itself. This thesis quantifies the levels of these uncertainties by performing a large number of simulations on three offshore modules and one onshore plant. It is found that (1) there is an approximate linear relation between pressure and gas volume, (2) it may be possible to find a linear relation between pressure and impulse, (3) there is an inverse relation between pressure and duration, (4) the response of offshore structures exposed to gas explosions are rarely in the impulsive regime, (5) loading rates vary widely in magnitude, (6) an assumption of a triangular explosion pulse is often correct, (7) louvres increase pressure, impulse and duration of an explosion. The effect of ignition point location is studied in detail. It is possible to derive an ignition point uncertainty load factor that shows predictable behaviour by generalizing the non-parametric properties of the explosion pressure. A model for taking into account the uncertainties regarding gas volume, ignition point location and simulator imperfectness is proposed. The model is intended to produce a characteristic load for structural design. 68 refs., 51 figs., 36 tabs.

  12. Experimental Explosive Characterization for Counterterrorist Investigation

    Science.gov (United States)

    Etayo, D.; Maestrojuan, I.; Teniente, J.; Ederra, I.; Gonzalo, R.

    2013-08-01

    A THz spectral characterization of different explosives of special interest for the Spanish National Security Forces "Guardia Civil" is presented in this paper. This forensic analysis has been done in the frequency range from 0.060 THz to 3.5 THz using the Teraview TPS Spectra 3000 system in laboratory conditions. With this equipment the refractive index, absorbance and complex permittivity of the explosive samples have been obtained. In this study, some of the most common used explosives (Bullet gunpowder, mine gunpowder, PETN, TNT, RDX) are analysed paying special attention to differences related to the manufacturing process used to elaborate some of them and to the purity of the samples. The different fabrication processes of the explosives lead to the same spectral behaviour and characteristics. At the same time, the inclusion of some additives in the explosive samples does not alter their main electromagnetic properties. The sensitivity limit of the measurement system has been found to be to 10 mg of explosives. These results will be used to design future THz imaging systems that allow to detect and identify them in security and defence applications and/or to complete laboratory studies after a terrorist action.

  13. Thermal explosion in oscillating ambient conditions

    Science.gov (United States)

    Novozhilov, Vasily

    2016-01-01

    Thermal explosion problem for a medium with oscillating ambient temperature at its boundaries is considered. This is a new problem in thermal explosion theory, not previously considered in a distributed system formulation, but important for combustion and fire science. It describes autoignition of wide range of fires (such as but not limited to piles of biosolids and other organic matter; storages of munitions, explosives, propellants) subjected to temperature variations, such as seasonal or day/night variation. The problem is considered in formulation adopted in classical studies of thermal explosion. Critical conditions are determined by frequency and amplitude of ambient temperature oscillations, as well as by a number of other parameters. Effects of all the parameters on critical conditions are quantified. Results are presented for the case of planar symmetry. Development of thermal explosion in time is also considered, and a new type of unsteady thermal explosion development is discovered where thermal runaway occurs after several periods of temperature oscillations within the medium. PMID:27443235

  14. Solid Rocket Launch Vehicle Explosion Environments

    Science.gov (United States)

    Richardson, E. H.; Blackwood, J. M.; Hays, M. J.; Skinner, T.

    2014-01-01

    Empirical explosion data from full scale solid rocket launch vehicle accidents and tests were collected from all available literature from the 1950s to the present. In general data included peak blast overpressure, blast impulse, fragment size, fragment speed, and fragment dispersion. Most propellants were 1.1 explosives but a few were 1.3. Oftentimes the data from a single accident was disjointed and/or missing key aspects. Despite this fact, once the data as a whole was digitized, categorized, and plotted clear trends appeared. Particular emphasis was placed on tests or accidents that would be applicable to scenarios from which a crew might need to escape. Therefore, such tests where a large quantity of high explosive was used to initiate the solid rocket explosion were differentiated. Also, high speed ground impacts or tests used to simulate such were also culled. It was found that the explosions from all accidents and applicable tests could be described using only the pressurized gas energy stored in the chamber at the time of failure. Additionally, fragmentation trends were produced. Only one accident mentioned the elusive "small" propellant fragments, but upon further analysis it was found that these were most likely produced as secondary fragments when larger primary fragments impacted the ground. Finally, a brief discussion of how this data is used in a new launch vehicle explosion model for improving crew/payload survival is presented.

  15. Green primary explosives: 5-Nitrotetrazolato-N2-ferrate hierarchies

    OpenAIRE

    Huynh, My Hang V.; Coburn, Michael D.; Meyer, Thomas J.; Wetzler, Modi

    2006-01-01

    The sensitive explosives used in initiating devices like primers and detonators are called primary explosives. Successful detonations of secondary explosives are accomplished by suitable sources of initiation energy that is transmitted directly from the primaries or through secondary explosive boosters. Reliable initiating mechanisms are available in numerous forms of primers and detonators depending upon the nature of the secondary explosives. The technology of initiation devices used for mi...

  16. Explosions in Majestic Spiral Beauties

    Science.gov (United States)

    2004-12-01

    Images of beautiful galaxies, and in particular of spiral brethren of our own Milky Way, leaves no-one unmoved. It is difficult indeed to resist the charm of these impressive grand structures. Astronomers at Paranal Observatory used the versatile VIMOS instrument on the Very Large Telescope to photograph two magnificent examples of such "island universes", both of which are seen in a southern constellation with an animal name. But more significantly, both galaxies harboured a particular type of supernova, the explosion of a massive star during a late and fatal evolutionary stage. The first image (PR Photo 33a/04) is of the impressive spiral galaxy NGC 6118 [1], located near the celestial equator, in the constellation Serpens (The Snake). It is a comparatively faint object of 13th magnitude with a rather low surface brightness, making it pretty hard to see in small telescopes. This shyness has prompted amateur astronomers to nickname NGC 6118 the "Blinking Galaxy" as it would appear to flick into existence when viewed through their telescopes in a certain orientation, and then suddenly disappear again as the eye position shifted. There is of course no such problem for the VLT's enormous light-collecting power and ability to produce sharp images, and this magnificent galaxy is here seen in unequalled detail. The colour photo is based on a series of exposures behind different optical filters, obtained with the VIMOS multi-mode instrument on the 8.2-m VLT Melipal telescope during several nights around August 21, 2004. About 80 million light-years away, NGC 6118 is a grand-design spiral seen at an angle, with a very small central bar and several rather tightly wound spiral arms (it is classified as of type "SA(s)cd" [2]) in which large numbers of bright bluish knots are visible. Most of them are active star-forming regions and in some, very luminous and young stars can be perceived. Of particular interest is the comparatively bright stellar-like object situated directly

  17. Studies of the laser-induced fluorescence of explosives and explosive compositions.

    Energy Technology Data Exchange (ETDEWEB)

    Hargis, Philip Joseph, Jr. (,; .); Thorne, Lawrence R.; Phifer, Carol Celeste; Parmeter, John Ethan; Schmitt, Randal L.

    2006-10-01

    Continuing use of explosives by terrorists throughout the world has led to great interest in explosives detection technology, especially in technologies that have potential for standoff detection. This LDRD was undertaken in order to investigate the possible detection of explosive particulates at safe standoff distances in an attempt to identify vehicles that might contain large vehicle bombs (LVBs). The explosives investigated have included the common homogeneous or molecular explosives, 2,4,6-trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN), cyclonite or hexogen (RDX), octogen (HMX), and the heterogeneous explosive, ammonium nitrate/fuel oil (ANFO), and its components. We have investigated standard excited/dispersed fluorescence, laser-excited prompt and delayed dispersed fluorescence using excitation wavelengths of 266 and 355 nm, the effects of polarization of the laser excitation light, and fluorescence imaging microscopy using 365- and 470-nm excitation. The four nitro-based, homogeneous explosives (TNT, PETN, RDX, and HMX) exhibit virtually no native fluorescence, but do exhibit quenching effects of varying magnitude when adsorbed on fluorescing surfaces. Ammonium nitrate and fuel oil mixtures fluoresce primarily due to the fuel oil, and, in some cases, due to the presence of hydrophobic coatings on ammonium nitrate prill or impurities in the ammonium nitrate itself. Pure ammonium nitrate shows no detectable fluorescence. These results are of scientific interest, but they provide little hope for the use of UV-excited fluorescence as a technique to perform safe standoff detection of adsorbed explosive particulates under real-world conditions with a useful degree of reliability.

  18. Simulating thermal explosion of RDX-based explosives: Model comparison with experiment

    Energy Technology Data Exchange (ETDEWEB)

    Yoh, J J; McClelland, M A; Maienschein, J L; Wardell, J F; Tarver, C M

    2004-10-11

    We compare two-dimensional model results with measurements for the thermal, chemical and mechanical behavior in a thermal explosion experiment. Confined high explosives are heated at a rate of 1 C per hour until an explosion is observed. The heating, ignition, and deflagration phases are modeled using an Arbitrarily Lagrangian-Eulerian code (ALE3D) that can handle a wide range of time scales that vary from a structural to a dynamic hydro time scale. During the pre-ignition phase, quasi-static mechanics and diffusive thermal transfer from a heat source to the HE are coupled with the finite chemical reactions that include both endothermic and exothermic processes. Once the HE ignites, a hydro dynamic calculation is performed as a burn front propagates through the HE. Two RDX-based explosives, C-4 and PBXN-109, are considered, whose chemical-thermal-mechanical models are constructed based on measurements of thermal and mechanical properties along with small scale thermal explosion measurements. The simulated dynamic response of HE confinement during the explosive phase is compared to measurements in large scale thermal explosion tests. The explosion temperatures for both HE's are predicted to within 5 C. Calculated and measured wall strains provide an indication of vessel pressurization during the heating phase and violence during the explosive phase. During the heating phase, simulated wall strains provide only an approximate representation of measured values indicating a better numerical treatment is needed to provide accurate results. The results also show that more numerical accuracy is needed for vessels with lesser confinement strength. For PBXN-109, the measured wall strains during the explosion are well represented by the ALE3D calculations.

  19. Thermal Impulse Sensors for use in Explosions

    Science.gov (United States)

    Eilers, Hergen; Gunawidjaja, Ray; Anderson, Benjamin

    2017-06-01

    We have developed temperature and thermal impulse (temperature and duration) sensors for use in explosive fireballs. These sensors are seeded into an explosive fireball and record temperature and duration via morphological phase changes that are optically probed. The thermal impulse sensors include two sensor materials with different phase transition kinetics, and may include a reference material which does not undergo temperature-induced phase changes, and can aid in the optical analysis. Analyzing the sensor materials allows us to determine heating temperature and heating duration of an explosion. The temperature sensors and thermal impulse sensors were recently tested and showed promising results. However, we found that the different components of the thermal impulse sensors tend to get separated during the explosion. We are now evaluating several approaches for redesigning our thermal impulse sensors so that the components remain together during the explosion. These approaches include a core/shell assembly, crosslinking, and co-synthesis. The integrity of the chemically bonded components is evaluated by subjecting the sensors to dispersing forces, while temperature-dependent phase changes of these sensors are assessed by rapid heating using a CO2 laser.

  20. Toxicology of explosives and fireworks in small animals.

    Science.gov (United States)

    Gahagan, Patti; Wismer, Tina

    2012-03-01

    Intoxication with explosives or fireworks in dogs or cats is not common, but serious toxicosis can result from exposure to different types of explosives depending on the chemical class of explosive involved. This article will discuss the different types of materials/chemicals, clinical signs of toxicosis, and their treatment. Despite the complexities of explosives and plethora of different devices currently in use worldwide, the toxic potential is more easily explained by looking at the relatively short list of chemical classes used to produce these materials. This article combines structurally similar explosives into different groups and focuses on the toxicity of the most commonly available explosives.

  1. Sourcing explosives: a multi-isotope approach.

    Science.gov (United States)

    Widory, David; Minet, Jean-Jacques; Barbe-Leborgne, Martine

    2009-06-01

    Although explosives are easily identified with current instrumental techniques, it is generally impossible to distinguish between sources of the same substance. To alleviate this difficulty, we present a multi-stable isotope (delta13C, delta15N, delta18O, deltaD) approach for appraising the possibility of discriminating explosives. The results from 30 distinct PETN, TNT and ANFO samples show that the different families of explosives are clearly differentiated by both their specific isotope signatures and their combination with corresponding element concentrations. Coupling two or more of the studied isotope systematics yields an even more precise differentiation on the basis of their raw-material origin and/or manufacturing process.

  2. Criticality safety in high explosives dissolution

    Energy Technology Data Exchange (ETDEWEB)

    Troyer, S.D.

    1997-06-01

    In 1992, an incident occurred at the Pantex Plant in which the cladding around a fissile material component (pit) cracked during dismantlement of the high explosives portion of a nuclear weapon. Although the event did not result in any significant contamination or personnel exposures, concerns about the incident led to the conclusion that the current dismantlement process was unacceptable. Options considered for redesign, dissolution tooling design considerations, dissolution tooling design features, and the analysis of the new dissolution tooling are summarized. The final tooling design developed incorporated a number of safety features and provides a simple, self-contained, low-maintenance method of high explosives removal for nuclear explosive dismantlement. Analyses demonstrate that the tooling design will remain subcritical under normal, abnormal, and credible accident scenarios. 1 fig.

  3. Magnetorotational Explosions of Core-Collapse Supernovae

    Directory of Open Access Journals (Sweden)

    Gennady S. Bisnovatyi-Kogan

    2014-12-01

    Full Text Available Core-collapse supernovae are accompanied by formation of neutron stars. The gravitation energy is transformed into the energy of the explosion, observed as SN II, SN Ib,c type supernovae. We present results of 2-D MHD simulations, where the source of energy is rotation, and magnetic eld serves as a "transition belt" for the transformation of the rotation energy into the energy of the explosion. The toroidal part of the magnetic energy initially grows linearly with time due to dierential rotation. When the twisted toroidal component strongly exceeds the poloidal eld, magneto-rotational instability develops, leading to a drastic acceleration in the growth of magnetic energy. Finally, a fast MHD shock is formed, producing a supernova explosion. Mildly collimated jet is produced for dipole-like type of the initial field. At very high initial magnetic field no MRI development was found.

  4. [First aid to persons with explosion trauma].

    Science.gov (United States)

    Shapovalov, V M; Samokhvalov, I M

    2012-10-01

    Modern organization providing medical aid to victims of explosion trauma in peace time, the success of which largely depends on the timely and professional interaction among the structures involeved into emergency relief operation is represented in the article. Content and sequence of events providing emergency medical and first medical aid to victims of the explosions, and the appropriateness of allocation affected groups, based on the predicted effectiveness of medical care is analyzed. The algorithm, currently used by ambulance crews, of assistance to victims with explosion and order evacuations is analyzed. The content of therapeutic measures in receipt of the wounded on the steps of skilled and specialized surgical care in accordance with the idea of a separation surgery on three stages (damage control). The content of the main levels of damage control orthopedics is introduced.

  5. PINS Testing and Modification for Explosive Identification

    Energy Technology Data Exchange (ETDEWEB)

    E.H. Seabury; A.J. Caffrey

    2011-09-01

    The INL's Portable Isotopic Neutron Spectroscopy System (PINS)1 non-intrusively identifies the chemical fill of munitions and sealed containers. PINS is used routinely by the U.S. Army, the Defense Threat Reduction Agency, and foreign military units to determine the contents of munitions and other containers suspected to contain explosives, smoke-generating chemicals, and chemical warfare agents such as mustard and nerve gas. The objects assayed with PINS range from softball-sized M139 chemical bomblets to 200 gallon DOT 500X ton containers. INL had previously examined2 the feasibility of using a similar system for the identification of explosives, and based on this proof-of-principle test, the development of a dedicated system for the identification of explosives in an improvised nuclear device appears entirely feasible. INL has been tasked by NNSA NA-42 Render Safe Research and Development with the development of such a system.

  6. Securing Infrastructure from High Explosive Threats

    Energy Technology Data Exchange (ETDEWEB)

    Glascoe, L; Noble, C; Reynolds, J; Kuhl, A; Morris, J

    2009-03-20

    Lawrence Livermore National Laboratory (LLNL) is working with the Department of Homeland Security's Science and Technology Directorate, the Transportation Security Administration, and several infrastructure partners to characterize and help mitigate principal structural vulnerabilities to explosive threats. Given the importance of infrastructure to the nation's security and economy, there is a clear need for applied research and analyses (1) to improve understanding of the vulnerabilities of these systems to explosive threats and (2) to provide decision makers with time-critical technical assistance concerning countermeasure and mitigation options. Fully-coupled high performance calculations of structural response to ideal and non-ideal explosives help bound and quantify specific critical vulnerabilities, and help identify possible corrective schemes. Experimental validation of modeling approaches and methodologies builds confidence in the prediction, while advanced stochastic techniques allow for optimal use of scarce computational resources to efficiently provide infrastructure owners and decision makers with timely analyses.

  7. Speciation of Fe in ambient aerosol and cloudwater

    Energy Technology Data Exchange (ETDEWEB)

    Siefert, Ronald Lyn [California Inst. of Technology (CalTech), Pasadena, CA (United States)

    1996-08-15

    Atmospheric iron (Fe) is thought to play an important role in cloudwater chemistry (e.g., S(IV) oxidation, oxidant production, etc.), and is also an important source of Fe to certain regions of the worlds oceans where Fe is believed to be a rate-limiting nutrient for primary productivity. This thesis focuses on understanding the chemistry, speciation and abundance of Fe in cloudwater and aerosol in the troposphere, through observations of Fe speciation in the cloudwater and aerosol samples collected over the continental United States and the Arabian Sea. Different chemical species of atmospheric Fe were measured in aerosol and cloudwater samples to help assess the role of Fe in cloudwater chemistry.

  8. U(IV) fluorescence spectroscopy. A new speciation tool

    Energy Technology Data Exchange (ETDEWEB)

    Lehmann, Susanne; Brendler, Vinzenz [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Surface Processes; Steudtner, Robin [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Inst. of Resource Ecology

    2017-06-01

    We combined absorption and fluorescence spectroscopy to study the speciation of U(IV) in solution in concentrations down to 10{sup -6} M uranium. With our time-resolved laser-induced fluorescence setup we could determine the fluorescence decay time of U(IV) in perchloric as well as in chloric acid with 2.6 ± 0.3 ns at room temperature and 148.4 ± 6.5 ns at liquid nitrogen temperature. For the U(IV) sulfate system, we observed a bathochromic shift and a peak shape modification in the fluorescence spectra with increasing sulfate concentration in solution. Thus, the potential of U(IV) fluorescence for speciation analysis could be proven.

  9. Surveying selenium speciation from soil to cell - forms and transformations

    Energy Technology Data Exchange (ETDEWEB)

    Gammelgaard, Bente; Gabel-Jensen, Charlotte [University of Copenhagen, Department of Pharmaceutics and Analytical Chemistry, Faculty of Pharmaceutical Sciences, Copenhagen (Denmark); Jackson, Matthew I. [Grand Forks Human Nutrition Research Center, Agricultural Research Service, United States Department of Agriculture, Grand Forks, ND (United States)

    2011-02-15

    The aim of this review is to present and evaluate the present knowledge of which selenium species are available to the general population in the form of food and common supplements and how these species are metabolized in mammals. The overview of the selenium sources takes a horizontal approach, which encompasses identification of new metabolites in yeast and food of plant and animal origin, whereas the survey of the mammalian metabolism takes a horizontal as well as a vertical approach. The vertical approach encompasses studies on dynamic conversions of selenium compounds within cells, tissues or whole organisms. New and improved sample preparation, separation and detection methods are evaluated from an analytical chemical perspective to cover the progress in horizontal speciation, whereas the analytical methods for the vertical speciation and the interpretations of the results are evaluated from a biological angle as well. (orig.)

  10. Synergy between Allopatry and Ecology in Population Differentiation and Speciation

    Directory of Open Access Journals (Sweden)

    Yann Surget-Groba

    2012-01-01

    Full Text Available The general diversity pattern of the Caribbean anole radiation has been described in detail; however, the actual mechanisms at the origin of their diversification remain controversial. In particular, the role of ecological speciation, and the relative importance of divergence in allopatry and in parapatry, is debated. We describe the genetic structure of anole populations across lineage contact zones and ecotones to investigate the effect of allopatric divergence, natural selection, and the combination of both factors on population differentiation. Allopatric divergence had no significant impact on differentiation across the lineage boundary, while a clear bimodality in genetic and morphological characters was observed across an ecotone within a single lineage. Critically, the strongest differentiation was observed when allopatry and ecology act together, leading to a sharp reduction in gene flow between two lineages inhabiting different habitats. We suggest that, for Caribbean anoles to reach full speciation, a synergistic combination of several historical and ecological factors may be requisite.

  11. Explosive fragmentation of liquids in spherical geometry

    Science.gov (United States)

    Milne, A.; Longbottom, A.; Frost, D. L.; Loiseau, J.; Goroshin, S.; Petel, O.

    2017-05-01

    Rapid acceleration of a spherical shell of liquid following central detonation of a high explosive causes the liquid to form fine jets that are similar in appearance to the particle jets that are formed during explosive dispersal of a packed layer of solid particles. Of particular interest is determining the dependence of the scale of the jet-like structures on the physical parameters of the system, including the fluid properties (e.g., density, viscosity, and surface tension) and the ratio of the mass of the liquid to that of the explosive. The present paper presents computational results from a multi-material hydrocode describing the dynamics of the explosive dispersal process. The computations are used to track the overall features of the early stages of dispersal of the liquid layer, including the wave dynamics, and motion of the spall and accretion layers. The results are compared with new experimental results of spherical charges surrounded by a variety of different fluids, including water, glycerol, ethanol, and vegetable oil, which together encompass a significant range of fluid properties. The results show that the number of jet structures is not sensitive to the fluid properties, but primarily dependent on the mass ratio. Above a certain mass ratio of liquid fill-to-explosive burster ( F / B), the number of jets is approximately constant and consistent with an empirical model based on the maximum thickness of the accretion layer. For small values of F / B, the number of liquid jets is reduced, in contrast with explosive powder dispersal, where small F / B yields a larger number of particle jets. A hypothetical explanation of these features based on the nucleation of cavitation is explored numerically.

  12. Jet noise recorded during discrete explosive eruptions

    Science.gov (United States)

    Scarlato, P.; Sesterhenn, J.; Taddeucci, J.

    2013-12-01

    Most commonly, acoustic studies of explosive volcanic activity focus on the infrasonic range, as related to large volumetric changes mostly associated with the liberation of pressurized gas. However, there are multiple potential sources of sound that accompany explosive activity, expected to cover a broad range of frequencies. Among the audible range are several mechanisms, generating sound in high-velocity jets of gas or gas-particle mixture entering the atmosphere. This types of sound, well-documented and investigated in physics and engineering literature, has been so far mostly neglected in the study of explosive eruptions, due to the high energy content of the jet noise in the infrasonic regime, despite the potential it holds for parameterizing and understanding eruption processes. High-speed imaging of Strombolian and Vulcanian explosive eruptions at several volcanoes allowed the visualization of acoustic waves generated during the emission of the eruptive gas-pyroclast mixture. The waves, visible only when travelling within dilute gas/aerosol plumes, are thought to cause a temporary phase change in the travel medium. Image analysis allows direct measurement of the apparent (projected) trajectory, wavelength and travel velocity of the waves. Synchronized audio recording from the same eruptions include frequency contents in agreement with the observed waves. The general features of the observed waves are compatible with jet noise originated by the gas-pyroclast mixture entering the atmosphere, opening the way for future comparison with the results of numerical simulations of explosive eruptions, and possibly setting the basis for new acoustic monitoring tools for explosive eruptions.

  13. Venting of gas explosion through relief ducts: interaction between internal and external explosions.

    Science.gov (United States)

    Ferrara, G; Willacy, S K; Phylaktou, H N; Andrews, G E; Di Benedetto, A; Salzano, E; Russo, G

    2008-06-30

    Relief ducts fitted to venting openings is a widespread configuration in the industrial practice. The presence of a duct has been reported to severely increase the violence of the vented explosion posing a problem for the proper design of the venting device. Several studies have reported the leading importance--in the whole complex explosion phenomenology--of a secondary explosion in the duct. Modern approaches in the study of simply vented explosions (without ducts) have focused on the study of the interaction between internal and external explosion as a key issue in the mechanisms of pressure generation. The issue is even more relevant when a duct is fitted to the vent due the confined nature of the external explosion. In this work the interaction between internal and external events is experimentally investigated for gas explosions vented through a relief duct. The work has aimed at studying mechanisms underlying the pressure rise of this venting configuration. The study has put the emphasis on the mutual nature of the interaction. A larger scale than laboratory has been investigated allowing drawing results with a greater degree of generality with respect to data so far presented in literature.

  14. Potential explosion hazard of carbonaceous nanoparticles: Explosion parameters of selected materials.

    Science.gov (United States)

    Turkevich, Leonid A; Dastidar, Ashok G; Hachmeister, Zachary; Lim, Michael

    2015-09-15

    Following a previous explosion screening study, we have conducted concentration and ignition energy scans on several carbonaceous nanopowders: fullerene, SWCNT, carbon black, MWCNT, graphene, CNF, and graphite. We have measured minimum explosive concentration (MEC), minimum ignition energy (MIE), and minimum ignition temperature (MITcloud) for these materials. The nanocarbons exhibit MEC ~10(1)-10(2) g/m(3), comparable to the MEC for coals and for fine particle carbon blacks and graphites. The nanocarbons are confirmed mainly to be in the St-1 explosion class, with fullerene, at K(St) ~200 bar-m/s, borderline St-1/St-2. We estimate MIE ~ 10(2)-10(3) J, an order of magnitude higher than the MIE for coals but an order of magnitude lower than the MIE for fine particle graphites. While the explosion severity of the nanocarbons is comparable to that of the coals, their explosion susceptibility (ease of ignition) is significantly less (i.e., the nanocarbons have higher MIEs than do the coals); by contrast, the nanocarbons exhibit similar explosion severity to the graphites but enhanced explosion susceptibility (i.e., the nanocarbons have lower MIEs than do the graphites). MIT(cloud) > 550 °C, comparable to that of the coals and carbon blacks. Published by Elsevier B.V.

  15. CHEMICAL SPECIATION OF Pb(II), Cd(II)

    African Journals Online (AJOL)

    Chemical speciation of Pb(II), Cd(II), Hg(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes of L-methionine in 0.0-60 % v/v 1,2-propanediol-water mixtures maintaining an ionic strength of 0.16 M at 303 K has been studied pH metrically. The active forms of ligand are LH2+, LH and L-. The predominant species detected are ML, ...

  16. Possible method for dissolved organic carbon speciation in forest soils

    Science.gov (United States)

    Drabek, O.; Tejnecký, V.; Ash, C.; Hubova, P.; Boruvka, L.

    2013-12-01

    Dissolved organic carbon (DOC) is a natural part of dissolved organic matter and it plays an important role in the biogeochemistry of soil processes. Low Molecular Mass Organic Acids (LMMOA) are an essential part of DOC. These acids play a key role in chemical processes that affect the entire soil environment. Knowing the amount of DOC and the speciation of LMMOA is required for realistic equilibrium modelling of soil chemical processes and transport mechanisms. There have been a number of proposed methods for the quantitative analysis of DOC and for speciation of LMMOA. The first aim of this contribution is to introduce and test a modified spectroscopic method for the determination of water-extractable organic carbon (WEOC) from forest soils. In general this method is based on the oxidization of WEOC by chromium-sulphuric acid. The presented method can be used as an economical alternative to the classical, more financially demanding elemental analysis. However, the main aim is to test the reliability of the method for LMMOA speciation. Ion exchange chromatography (IC) with hydroxide elution has proven to be a useful tool for the determination of LMMOA in many different water-based samples. However, the influence of multivalent cations (often present in environmental samples) on IC results has not yet been sufficiently studied. In order to assess the influence of Al, Fe, Mn, Mg and Ca on the amount of LMMOA determined by IC, an extensive set of model solutions was prepared and immediately analysed by means of IC. Moreover, the influence of pH on determined amounts of LMMOA in model solutions and representative soil aqueous extracts was investigated. These experimental results were compared to expected values and also to results provided by the chemical equilibrium model - PHREEQC. Based on the above listed research, some modifications to the common IC method for LMMOA speciation are presented.

  17. Sexual selection and natural selection in bird speciation

    OpenAIRE

    Price, T.

    1998-01-01

    The role of sexual selection in speciation is investigated, addressing two main issues. First, how do sexually selected traits become species recognition traits? Theory and empirical evidence suggest that female preferences often do not evolve as a correlated response to evolution of male traits. This implies that, contrary to runaway (Fisherian) models of sexual selection, premating isolation will not arise as an automatic side effect of divergence between populations in sexually selected tr...

  18. Pu speciation in actual and simulated aged wastes

    Energy Technology Data Exchange (ETDEWEB)

    Lezama-pacheco, Juan S [Los Alamos National Laboratory; Conradson, Steven D [Los Alamos National Laboratory

    2008-01-01

    X-ray Absorption Fine Structure Spectroscopy (XAFS) at the Pu L{sub II/III} edge was used to determine the speciation of this element in (1) Hanford Z-9 Pu crib samples, (2) deteriorated waste resins from a chloride process ion-exchange purification line, and (3) the sediments from two Waste Isolation Pilot Plant Liter Scale simulant brine systems. The Pu speciation in all of these samples except one is within the range previously displayed by PuO{sub 2+x-2y}(OH){sub y}{center_dot}zH{sub 2}O compounds, which is expected based on the putative thermodynamic stability of this system for Pu equilibrated with excess H{sub 2}O and O{sub 2} under environmental conditions. The primary exception was a near neutral brine experiment that displayed evidence for partial substitution of the normal O-based ligands with Cl{sup -} and a concomitant expansion of the Pu-Pu distance relative to the much more highly ordered Pu near neighbor shell in PuO{sub 2}. However, although the Pu speciation was not necessarily unusual, the Pu chemistry identified via the history of these samples did exhibit unexpected patterns, the most significant of which may be that the presence of the Pu(V)-oxo species may decrease rather than increase the overall solubility of these compounds. Several additional aspects of the Pu speciation have also not been previously observed in laboratory-based samples. The molecular environmental chemistry of Pu is therefore likely to be more complicated than would be predicted based solely on the behavior of PuO{sub 2} under laboratory conditions.

  19. Speciation and gene flow between snails of opposite chirality.

    Directory of Open Access Journals (Sweden)

    2005-09-01

    Full Text Available Left-right asymmetry in snails is intriguing because individuals of opposite chirality are either unable to mate or can only mate with difficulty, so could be reproductively isolated from each other. We have therefore investigated chiral evolution in the Japanese land snail genus Euhadra to understand whether changes in chirality have promoted speciation. In particular, we aimed to understand the effect of the maternal inheritance of chirality on reproductive isolation and gene flow. We found that the mitochondrial DNA phylogeny of Euhadra is consistent with a single, relatively ancient evolution of sinistral species and suggests either recent "single-gene speciation" or gene flow between chiral morphs that are unable to mate. To clarify the conditions under which new chiral morphs might evolve and whether single-gene speciation can occur, we developed a mathematical model that is relevant to any maternal-effect gene. The model shows that reproductive character displacement can promote the evolution of new chiral morphs, tending to counteract the positive frequency-dependent selection that would otherwise drive the more common chiral morph to fixation. This therefore suggests a general mechanism as to how chiral variation arises in snails. In populations that contain both chiral morphs, two different situations are then possible. In the first, gene flow is substantial between morphs even without interchiral mating, because of the maternal inheritance of chirality. In the second, reproductive isolation is possible but unstable, and will also lead to gene flow if intrachiral matings occasionally produce offspring with the opposite chirality. Together, the results imply that speciation by chiral reversal is only meaningful in the context of a complex biogeographical process, and so must usually involve other factors. In order to understand the roles of reproductive character displacement and gene flow in the chiral evolution of Euhadra, it will be

  20. Speciation of Heavy Metals in Sediment of Agbabu Bitumen deposit ...

    African Journals Online (AJOL)

    Michael Horsfall

    ABSTRACT: Speciation of heavy metals Cu, Cd, Pb, Ni, Zn, Mn, Fe, Cr and Hg was carried out on sediment of. Agbabu with a sequential .... sulphide:The residue from fraction 3 was oxidized as follows: 3ml of 0.02M HNO3 and 5ml of ... Another 3ml of 30% hydrogen peroxide, adjusted to. pH2 with HNO3, was then added.

  1. Bioslurry treatment of explosives contaminated soils

    Energy Technology Data Exchange (ETDEWEB)

    Zappi, M.; Gunnison, D.; Pennington, J.; Teeter, C. [USAE Waterways Experiment Station, Vicksburg, MS (United States). Environmental Lab.; Coyle, C.; Rope, C. [Army Engineer, Kansas City, MO (United States)

    1994-12-31

    Explosives contamination represents a widespread problem to the US Department of Defense (DOD) due to military activities associated with national defense. The US Army Engineer Waterways Experiment Station (WES) has evaluated the potential of several aerobic bioslurry process formulations for biotreatment of explosives compounds. This effort was conducted using five liter bench scale bioslurry reactors. Results were that the addition of a commercially available surfactant dramatically improved the treatment effectiveness of aerobic bioslurry. The surfactant amended bioreactors achieved an approximate 100 percent decrease in TNT half-life.

  2. Explosive opening switch work at Westinghouse

    Science.gov (United States)

    Aivaliotis, E.; Peterhans, M.

    1989-01-01

    An explosive switch that commutated 315 kA into a resistor and a second version designed to switch up to 1 MA into an HPG (homopolar generator)-driven railgun system are presented. These switches are located very near the load and consist of a set of main busbars in a low-inductance configuration shorted by a thinner switch busbar. Linear-shaped charges are used to sever this switch busbar at several locations when a preselected current level is attained, commutating the current into the load. The feasibility of multishot explosive switches for electromagnetic-launch systems is also considered.

  3. Explosive Outflows from Forming Massive Stars

    OpenAIRE

    Bally, J.; Ginsburg, A.; Kasliwal, M. M.

    2016-01-01

    AO imaging of the near IR [Fe ii] and H_2 lines and ALMA CO J = 2 − 1 data confirms the explosive nature of the BN/KL outflow in Orion. N-body interactions in compact groups may be responsible for the production of powerful, explosive protostellar outflows and luminous infrared flares. The Orion event may have been triggered by a protostellar merger. First results of a search for Orion-like events in 200 nearby galaxies with the SPitzer InfraRed Intensive Transients Survey (SPIRITS) are brief...

  4. Spherical Solutions of an Underwater Explosion Bubble

    Directory of Open Access Journals (Sweden)

    Andrew B. Wardlaw

    1998-01-01

    Full Text Available The evolution of the 1D explosion bubble flow field out to the first bubble minimum is examined in detail using four different models. The most detailed is based on the Euler equations and accounts for the internal bubble fluid motion, while the simplest links a potential water solution to a stationary, Isentropic bubble model. Comparison of the different models with experimental data provides insight into the influence of compressibility and internal bubble dynamics on the behavior of the explosion bubble.

  5. Nanopowder synthesis based on electric explosion technology

    Science.gov (United States)

    Kryzhevich, D. S.; Zolnikov, K. P.; Korchuganov, A. V.; Psakhie, S. G.

    2017-10-01

    A computer simulation of the bicomponent nanoparticle formation during the electric explosion of copper and nickel wires was carried out. The calculations were performed in the framework of the molecular dynamics method using many-body potentials of interatomic interaction. As a result of an electric explosion of dissimilar metal wires, bicomponent nanoparticles having different stoichiometry and a block structure can be formed. It is possible to control the process of destruction and the structure of the formed bicomponent nanoparticles by varying the distance between the wires and the loading parameters.

  6. Explosive detection using infrared laser spectroscopy

    Science.gov (United States)

    Hildenbrand, J.; Herbst, J.; Wöllenstein, J.; Lambrecht, A.

    2009-01-01

    Stand-off and extractive explosive detection methods for short distances are investigated using mid-infrared laser spectroscopy. A quantum cascade laser (QCL) system for TATP-detection by open path absorption spectroscopy in the gas phase was developed. In laboratory measurements a detection limit of 5 ppm*m was achieved. For explosives with lower vapor pressure an extractive hollow fiber based measurement system was investigated. By thermal desorption gaseous TATP or TNT is introduced into a heated fiber. The small sample volume and a fast gas exchange rate enable fast detection. TNT and TATP detection levels below 100 ng are feasible even in samples with a realistic contaminant background.

  7. The role of male contest competition over mates in speciation

    Directory of Open Access Journals (Sweden)

    Anna QVARNSTRÖM, Niclas VALLIN, Andreas RUDH

    2012-06-01

    Full Text Available Research on the role of sexual selection in the speciation process largely focuses on the diversifying role of mate choice. In particular, much attention has been drawn to the fact that population divergence in mate choice and in the male traits subject to choice directly can lead to assortative mating. However, male contest competition over mates also constitutes an important mechanism of sexual selection. We review recent empirical studies and argue that sexual selection through male contest competition can affect speciation in ways other than mate choice. For example, biases in aggression towards similar competitors can lead to disruptive and negative frequency-dependent selection on the traits used in contest competition in a similar way as competition for other types of limited resources. Moreover, male contest abilities often trade-off against other abilities such as parasite resistance, protection against predators and general stress tolerance. Populations experiencing different ecological conditions should therefore quickly diverge non-randomly in a number of traits including male contest abilities. In resource based breeding systems, a feedback loop between competitive ability and habitat use may lead to further population divergence. We discuss how population divergence in traits used in male contest competition can lead to the build up of reproductive isolation through a number of different pathways. Our main conclusion is that the role of male contest competition in speciation remains largely scientifically unexplored [Current Zoology 58 (3: 490–506, 2012].

  8. Speciation, in the nuclear fuel cycle by spectroscopic techniques

    Energy Technology Data Exchange (ETDEWEB)

    Colette, S.; Plancque, G.; Allain, F.; Lamouroux, C.; Steiner, V.; Amekraz, B.; Moulin, C. [CEA/Saclay, Dept, des Procedes d' Enrichissement (DPE), 91 - Gif-sur-Yvette (France)

    2000-07-01

    New analytical techniques allowing to perform speciation in the framework of the nuclear fuel cycle are more and more needed. They have to be selective (since matrix encountered are very complex), sensitive (in order to work at representative concentration and below solubility limit), as well as non intrusive (in order to keep the image of the real solution). Among them, laser-based analytical techniques present these advantages together with the possibility to perform remote measurements via fiber optics. Hence, Time-Resolved Laser-Induced Fluorescence (TRLIF) has been used for actinides/lanthanides interaction and speciation studies in inorganic and organic matrices from the reprocessing to waste storage. Moreover, new ion detection methods such as Electro-Spray - Mass Spectrometry (ES-MS) seems promising for speciation studies. Hence, it is the first time that it is possible to directly couple a liquid at atmospheric pressure to a mass detection working at reduced pressure with a soft mode of ionisation that should allow to give informations on chemical species present. Principle, advantages and limitations as well as results obtained with the use of TRLIF and ES-MS on different systems of interest including actinides, lanthanides, fission products in interaction with simple organic molecules to very complex structure will be presented and discussed. (authors)

  9. Mercury speciation in seafood using isotope dilution analysis: a review.

    Science.gov (United States)

    Clémens, Stéphanie; Monperrus, Mathilde; Donard, Olivier F X; Amouroux, David; Guérin, Thierry

    2012-01-30

    Mercury is a toxic compound that can contaminate humans through food and especially via fish consumption. Mercury's toxicity depends on the species, with methylmercury being the most hazardous form for humans. Hg speciation analysis has been and remains a widely studied subject because of the potential difficulty of preserving the initial distribution of mercury species in the analysed sample. Accordingly, many analytical methods have been developed and most of them incur significant loss and/or cross-species transformations during sample preparation. Therefore, to monitor and correct artefact formations, quantification by isotope dilution is increasingly used and provides significant added value for analytical quality assurance and quality control. This review presents and discusses the two different modes of application of isotope dilution analysis for elemental speciation (i.e. species-unspecific isotope dilution analysis and species-specific isotope dilution analysis) and the different quantification techniques (i.e. classical and multiple spike isotope dilution analyses). Isotope tracers are thus used at different stages of sample preparation to determine the extent of inter-species transformations and correct such analytical artefacts. Finally, a synthesis of the principal methods used for mercury speciation in seafood using isotope dilution analysis is presented. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Chemical speciation of vanadium in coal bottom Ash

    Energy Technology Data Exchange (ETDEWEB)

    Aydin, Firat; Aydin, Isil; Hamamci, Candan [Science Faculty, Chemistry Department, Dicle University, Diyarbakir (Turkey); Saydut, Abdurrahman [Engineering Faculty, Mining Engineering Department, Dicle University, Diyarbakir (Turkey); Gunduz, Beniz [Science Faculty, Chemistry Department, Selcuk University, Konya (Turkey)

    2012-04-15

    Chemical speciation of vanadium is important to understand the true nature of this element in the environment as well as its biochemical pathways. Sample pretreatment, preparation, and chemical speciation methods were applied for vanadium in coal bottom ash here. Two-stage microwave acid digestion was used to preparation of samples. Determination of vanadium was performed using inductively coupled plasma-optical emission spectrometry (ICP-OES). Speciation of vanadium was carried out using a seven-step sequential extraction procedure of the coal bottom ash each releasing species of vanadium: Water soluble, exchangeable, carbonate, reducible, oxidizable, sulfide, and residual fractions. Total vanadium concentration in the coal bottom ash is 701 mg kg{sup -1} d.w. The most abundant form of vanadium in coal bottom ash is residual fraction of vanadium (196 mg kg{sup -1} d.w.). Relative abundances of the remaining vanadium fractions in coal bottom ash are as follows: Reducible (176 mg kg{sup -1} d.w.) > sulfide (176 mg kg{sup -1} d.w.) > carbonate (85 mg kg{sup -1} d.w.) > oxidizable (50 mg kg{sup -1} d.w.) > water soluble (10.6 mg kg{sup -1} d.w.) > exchangeable (9.0 mg kg{sup -1} d.w.). (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  11. The influence of speciation on the ecotoxic effects of heavy metals in aquatic systems

    DEFF Research Database (Denmark)

    Jensen, Karen S.; Borggaard, Ole K.; Hauschild, Michael Zwicky

    The fate, bioavailability and exposure of aquatic organisms to potentially toxic metals are strongly influenced by the speciation of the metal ions in the medium. Metal speciation is mainly controlled by pH, ionic strength, and presence of ligands ranging from small ions (e.g. citrate, EDTA...... for the total chemical mass emitted into the environment. In this study we show that by means of the metal speciation, EF can be corrected in such a way that the resulting CF becomes more accurate for each metal in the LCIA. The chemical speciation in various media was calculated by Visual Minteq ver. 2.......56. Calculations showed that the speciation is very dependent on the metal concentration and the composition of the media. A large variation in heavy metal toxicity for the same test organism was found for a given metal in different media. Our main hypothesis is that this is due to differences in speciation...

  12. SANITARY AND HYGIENIC PRECONDITIONS FOR THE MANUFACTURE OF EXPLOSIVES

    OpenAIRE

    Turuchko, Ivan Ivanovych; Korshun, M.M.; Hubar, Inna Volodymyrivna

    2017-01-01

    The sanitary and hygienic characteristics of industrial explosives and their components are considered, the types of combinations of harmful substances in the air of the working zone at different technological stages of manufacturing explosives

  13. Evaluation of the Thermochemical Code - CHEETAH 2.0 for Modelling Explosives Performance

    National Research Council Canada - National Science Library

    Lu, Jing

    2001-01-01

    The Lawrence Livermore National Laboratory CHEETAH 2.0 program has been used to analyse a number of conventional ideal explosive ingredients, ideal explosive compositions, non-ideal explosive compositions, and new and proposed explosives...

  14. Revisiting the particular role of host shifts in initiating insect speciation.

    Science.gov (United States)

    Forbes, Andrew A; Devine, Sara N; Hippee, Alaine C; Tvedte, Eric S; Ward, Anna K G; Widmayer, Heather A; Wilson, Caleb J

    2017-05-01

    The notion that shifts to new hosts can initiate insect speciation is more than 150 years old, yet widespread conflation with paradigms of sympatric speciation has led to confusion about how much support exists for this hypothesis. Here, we review 85 insect systems and evaluate the relationship between host shifting, reproductive isolation, and speciation. We sort insects into five categories: (1) systems in which a host shift has initiated speciation; (2) systems in which a host shift has made a contribution to speciation; (3) systems in which a host shift has caused the evolution of new reproductive isolating barriers; (4) systems with host-associated genetic differences; and (5) systems with no evidence of host-associated genetic differences. We find host-associated genetic structure in 65 systems, 43 of which show that host shifts have resulted in the evolution of new reproductive barriers. Twenty-six of the latter also support a role for host shifts in speciation, including eight studies that definitively support the hypothesis that a host shift has initiated speciation. While this review is agnostic as to the fraction of all insect speciation events to which host shifts have contributed, it clarifies that host shifts absolutely can and do initiate speciation. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

  15. Landmine Detection Technologies to TraceExplosive Vapour Detection Techniques

    OpenAIRE

    J. C. Kapoor; G. K. Kannan

    2007-01-01

    Large quantity of explosive is manufactured worldwide for use in various types of ammunition,arms, and mines, and used in armed conflicts. During manufacturing and usage of the explosiveequipment, some of the explosive residues are released into the environment in the form ofcontaminated effluents, unburnt explosives fumes and vapours. Limited but uncontrolledcontinuous release of trace vapours also takes place when explosive-laden landmines are deployedin the field. One of the major technolo...

  16. A Study of the behaviour of emulsion explosives

    OpenAIRE

    Allum, J

    2009-01-01

    This study investigated the formulation and characterisation of emulsion explosives. This included the manufacture of more than 120kg of emulsion explosive of which around 105kg was used on the explosive ordnance range in over 350 individual firings. For each emulsion composition, an average of eight firings was undertaken with which to substantiate the explosive performance data. The formulation was varied to determine the effects of water content upon the physical characte...

  17. Source analysis of underground chemical explosions

    Science.gov (United States)

    Chiang, A.; Ford, S. R.; Pitarka, A.

    2016-12-01

    Several physical mechanisms have been proposed to explain the generation of S-waves from underground explosions, such as asymmetries in the source, release of tectonic pre-stress, interactions with the free-surface, and heterogeneities in the Earth. An accurate description of the explosion source processes is an important step towards understanding which of these plausible mechanisms are actively contributing to the generation of S-waves and under what conditions. In this study we investigate the sensitivity of far-field waveforms to seismic source mechanisms by comparing simulated and recorded data from underground chemical explosions performed during the Source Physics Experiment. We use both forward and inverse waveform modeling approaches to estimate the source properties of the explosions, and compare solutions using different velocity models and at different frequency bands and distances. 1D and 3D velocity models are used to characterize wave propagation between the source and receiver. The 3D velocity models are constructed using available geological and geophysical data, and ambient noise seismic tomography. The 3D Green's functions are computed using a numerical finite-difference approach. We will investigate the sensitivity of far-field ground motion to different levels of source complexities, such as a single isotropic source or complex sources with non-isotropic radiation in the frequency range of 0.5 to 6 Hz.

  18. 78 FR 1143 - Explosive Siting Requirements; Correction

    Science.gov (United States)

    2013-01-08

    ... increases flexibility for launch site operators in site planning for the storage and handling of energetic... this final rule, contact Laura Montgomery, AGC 200, ] Senior Attorney for Commercial Space... in site planning for the storage and handling of energetic liquids and explosives. In the discussion...

  19. DOD Ammunition and Explosives Safety Standards

    Science.gov (United States)

    2008-02-29

    following: bulk lead azide, lead styphnate, mercury fulminate , tetracene, dry cyclotrimethylenetrinitramine (RDX) (also known as cyclonite, hexogen, or...primary explosives are lead azide and mercury fulminate . AP1.191. Primary fragment. A fragment from material in intimate contact with reacting AE

  20. Wave forming mechanisms in explosive welding

    NARCIS (Netherlands)

    Carton, E.P.

    2004-01-01

    Experimental results of wavy metal interfaces obtained by explosive welding are presented and used to determine which wave forming mechanism occurred. It was found that for small collision angles (smaller than about 20°) the Von Karman or jet indentation mechanism occurs, while for large collision

  1. Detection of Nuclear Explosions Using Infrasound Techniques

    Science.gov (United States)

    2007-12-01

    state-of-the- art wind-noise reduction systems, turbulent wind noise will prevent the detection of infrasonic signals from atmospheric explosions over...D.R., J.A. Vivas Veloso, P. Campus, M. Bell, T. Hoffmann, A. Langlois, P. Martysevich, E. Demirovic and J. Carvalho (2001). Detection of atmospheric

  2. Explosives safety research in the Netherlands

    NARCIS (Netherlands)

    Voort, M.M. van der; Weerheijm, J.; Wees, R.M.M. van; Dongen. P. van

    2013-01-01

    The handling of explosives and ammunition introduces a safety risk for personnel and third parties. Accidents related to storage, transport and transhipment may result in severe injury and material damage. TNO has developed a number of tools to quantify the consequences and risks of accidental

  3. EUExNet - A European Explosives Network

    Science.gov (United States)

    2010-07-01

    Tallinn Technical University (EE) • University of Latvia (LV) • Sprengschule Dresden (DE) • LEDAP (PT) • Irish Industrial Explosives (IR) • EFEE (EU...Univ. Latvia WP2 DISSEMINATION Chair KCEM WP3 QC and QA Chair KAU WP4 National nodes Chair IExpE WP5 Certification Chair LEDAP WP6 European

  4. Java: An Explosion on the Internet.

    Science.gov (United States)

    Read, Tim; Hall, Hazel

    Summer 1995 saw the release, with considerable media attention, of draft versions of Sun Microsystems' Java computer programming language and the HotJava browser. Java has been heralded as the latest "killer" technology in the Internet explosion. Sun Microsystems and numerous companies including Microsoft, IBM, and Netscape have agreed…

  5. Differential thermal analysis microsystem for explosive detection

    DEFF Research Database (Denmark)

    Olsen, Jesper Kenneth; Greve, Anders; Senesac, L.

    2011-01-01

    A micro differential thermal analysis (DTA) system is used for detection of trace explosive particles. The DTA system consists of two silicon micro chips with integrated heaters and temperature sensors. One chip is used for reference and one for the measurement sample. The sensor is constructed a...... of the Xsense project at the Technical University of Denmark (DTU) which combines four independent sensing techniques, these micro DNT sensors will be included in handheld explosives detectors with applications in homeland security and landmine clearance.......A micro differential thermal analysis (DTA) system is used for detection of trace explosive particles. The DTA system consists of two silicon micro chips with integrated heaters and temperature sensors. One chip is used for reference and one for the measurement sample. The sensor is constructed...... as a small silicon nitride membrane incorporating heater elements and a temperature measurement resistor. In this manuscript the DTA system is described and tested by measuring calorimetric response of 3 different kinds of explosives (TNT, RDX and PETN). This project is carried out under the framework...

  6. Developments in vapour cloud explosion blast modeling

    NARCIS (Netherlands)

    Mercx, W.P.M.; Berg, A.C. van den; Hayhurst, C.J.; Robertson, N.J.; Moran, K.C.

    2000-01-01

    TNT Equivalency methods are widely used for vapour cloud explosion blast modeling. Presently, however, other types of models are available which do not have the fundamental objections TNT Equivalency models have. TNO Multi-Energy method is increasingly accepted as a more reasonable alternative to be

  7. Explosion proof vehicle for tank inspection

    Science.gov (United States)

    Zollinger, William T [Idaho Falls, ID; Klingler, Kerry M [Idaho Falls, ID; Bauer, Scott G [Idaho Falls, ID

    2012-02-28

    An Explosion Proof Vehicle (EPV) having an interior substantially filled with an inert fluid creating an interior pressure greater than the exterior pressure. One or more flexible tubes provide the inert fluid and one or more electrical conductors from a control system to the vehicle. The vehicle is preferably used in subsurface tank inspection, whereby the vehicle is submerged in a volatile fluid.

  8. The Physics, Chemistry and Dynamics of Explosions

    Science.gov (United States)

    2012-01-01

    is to follow. 2. Fundamentals The basis of our present understanding began with the experimental observations of Berthelot & Vieille [1] and Mallard...carried out. References 1 Berthelot , M. & Vieille, P. 1881 On the propagation velocity of explosion phenomena. Acad. Sci. Comptes Rendus Math. 93, 18–22. 2

  9. Construction of hydrogenation stalls for explosions

    Energy Technology Data Exchange (ETDEWEB)

    Raichle, L.

    1943-05-03

    This report contained explanations for different questions that had been asked by the Association of Chemical Manufacturers. The first item discussed was the pressure occurring in hydrogenation stalls in hydrogen explosions. The pressures actually used were much smaller than the maximum design pressure due to burning gases being allowed to escape from the top and front of the stalls since these areas were open and it could not be assumed that the whole stall space was filled with a 32% hydrogen concentration at the beginning of an explosion. The second item discussed was specifications and rules for the building of hydrogenation stalls. These included the calculations for simple wind pressure according to the Building Code with the usual safety factors and the calculations for an inner pressure of 300 kg/m/sup 2/ with the usual safety factors. An explanation of a stall explosion in Poelitz and reinforced stall construction in Poelitz were two other items that were discussed. Appendix I of the report involved maximum pressures and temperature in hydrogen explosions. Diagram I was involved with this. Appendix II discussed the behavior of a hydrogen flame at high emerging velocities and Appendix III discussed stall construction at Poelitz.

  10. 75 FR 1085 - Commerce in Explosives; List of Explosive Materials (2009R-18T)

    Science.gov (United States)

    2010-01-08

    ... mixtures. Explosive powders. F Flash powder. Fulminate of mercury. Fulminate of silver. Fulminating gold. Fulminating mercury. Fulminating platinum. Fulminating silver. G Gelatinized nitrocellulose. Gem-dinitro...-dinitropentanoate]. MEAN [monoethanolamine nitrate]. Mercuric fulminate. Mercury oxalate. Mercury tartrate. Metriol...

  11. 76 FR 64974 - Commerce in Explosives; List of Explosive Materials (2011R-18T)

    Science.gov (United States)

    2011-10-19

    ... Flash powder. Fulminate of mercury. Fulminate of silver. Fulminating gold. Fulminating mercury. Fulminating platinum. Fulminating silver. G Gelatinized nitrocellulose. Gem-dinitro aliphatic explosive.... MDNP . MEAN . Mercuric fulminate. Mercury oxalate. Mercury tartrate. Metriol trinitrate. Minol-2 . MMAN...

  12. Determination of explosive blast loading equivalencies with an explosively driven shock tube

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, Scott I [Los Alamos National Laboratory; Hill, Larry G [Los Alamos National Laboratory; Morris, John S [Los Alamos National Laboratory

    2009-01-01

    Recently there has been significant interest in evaluating the potential of many different non-ideal energetic materials to cause blast damage. We present a method intended to quantitatively compare the blast loading generated by different energetic materials through use of an explosively driven shock tube. The test explosive is placed at the closed breech end of the tube and initiated with a booster charge. The resulting shock waves are then contained and focused by the tube walls to form a quasi-one-dimensional blast wave. Pressure transducers along the tube wall measure the blast overpressure versus distance from the source and allow the use of the one-dimensional blast scaling relationship to determine the energy deposited into the blast wave per unit mass of test explosive. These values are then compared for different explosives of interest and to other methods of equivalency determination.

  13. Expediency of application of explosion-relief constructions to ensure explosion resistance of production buildings

    Directory of Open Access Journals (Sweden)

    Lyapin Anton

    2016-01-01

    Full Text Available The article presents a model of economic evaluation and selection of explosion-relief constructions (ERC, as well as determination of explosion protection efficiency of buildings and structures provided on a stage of construction. It has been shown that definition of economic efficiency of ERС is the evaluation of its application for buildings with remote or automatically controlled production. It has been determined that an important role in design of explosive industrial facilities is played by selection of the economically feasible and effective materials for ERC. When selecting materials it is necessary to consider probability and yield of explosions. Necessity to create the methods allow considering such probability has been revealed.

  14. Modeling cookoff of HMX based PBX explosives

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, Michael L.

    2017-03-01

    We have previously developed a PBX 9501 cookoff model for the plastic bonded explosive PBX 9501 consisting of 95 wt% octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazoncine (HMX), 2.5 wt% Estane® 5703 (a polyurethane thermoplastic), and 2.5 wt% of a nitroplasticizer (NP): BDNPA/F, a 50/50 wt% eutectic mixture bis(2,2-dinitropropyl)-acetal (BDNPA) and bis(2,2-dinitropropyl)-formal (BDNPF). This fivestep model includes desorption of water, decomposition of the NP to form NO2, reaction of the NO2 with Estane and HMX, and decomposition of HMX [1]. This model has been successfully validated with data from six laboratories with scales ranging from 2 g to more than 2.5 kg of explosive. We have determined, that the PBX 9501 model can be used to predict cookoff of other plastic bonded explosives containing HMX and an inert binder, such as LX-04 consisting of 85 wt% HMX and 15 wt% Viton A (vinylidine fluoride/hexafluoropropylene copolymer), LX-07 (90 wt% HMX and 10 wt% Viton A), LX- 10-0 (95 wt% HMX and 5 wt% Viton A), and LX-14 consisting of 95.5 wt % HMX and 4.5 wt% Estane® 5702-F1 (a polyurethane thermoplastic). Normally our cookoff models are verified using Sandia’s Instrumented Thermal Initiation (SITI) experiment. However, SITI data for LX-04, LX-07, LX-10-0, and LX-14 are not available at pressed density; although, some molding powder SITI data on LX-10-0 and LX-14 exists. Tarver and Tran [2] provide some one-dimensional time-to-explosion (ODTX) data for these explosives. The applicability of the PBX 9501 model to LX-04, LX-07, LX-10-0, AND LX-14 was made using this ODTX data [2]. The PBX 9501 model is applied to these other explosives by accounting for the correct amount of HMX in the explosive and limiting the NP reaction. We have found the PBX 9501 model to be useful for predicting the response of these PBXs to abnormal thermal environments such as fire.

  15. Micro-explosion of compound drops

    Science.gov (United States)

    Chen, Chun-Kuei; Lin, Ta-Hui

    2014-08-01

    Introducing water into spray combustion systems, by either water-in-oil emulsification or supplementary water injection, is one of the major techniques for combustion improvement and NOx reduction. Plentiful researches are available on combustion of water-in-oil emulsion fuel drops. The emulsified liquid is a heterogeneous mixture of immiscible liquids. One component forms the continuous phase and the other component forms the discrete phase. The discrete phase consists of globules of the one fluid that are suspended in the continuous phase fluid. Water-in-oil emulsions are commonly considered for combustion applications because emulsions can result in micro-explosion, thereby reducing the average drop diameter to enhance liquid vaporization, and suppressing the formation of soot and NOx. However, the water addition generally does not exceed about 20% for smooth engine operations[!, 21. The combustion characteristics and micro-explosion of emulsion drop were studied by many researchers. The micro-explosion of water in fuel emulsion drops was caused by very fast growth of superheated water vapor bubbles, its superheat limits must be lower than the boiling point temperature of the fuel. These bubbles were primarily governed by the pressure difference between the superheated vapor and the liquid, and by the inertia imparted to the liquid by the motion of the bubble surface[3 6 In this study, we used a coaxial nozzle to generation the multi-component drop. The different type of water-in-oil fuel drops called the compound drops. Unlike an emulsion drop, a compound drop consists of a water core and a fuel shell, which can originate from the phase separation of emulsion[7, 81 or a water drop colliding with a fuel drop[9, 101 Burning and micro-explosion of compound drops have been found to be distinct from those of emulsion drops[9-111 Wang et al.[9 , 101 studied the combustion characteristics of collision merged alkane-water drops. The merged drops appeared in adhesive

  16. Increase of water resistance of ammonium nitrate explosives

    Directory of Open Access Journals (Sweden)

    Zulkhair Mansurov

    2012-03-01

    Full Text Available Developed a method of kapsulating of ammonium nitrate with liquid paraffin increase finding explosives in water for 60 minutes. Placing explosives in the plastic shell, the explosive was, as in standing or running water during the day. When conducting field tests failures were absent.

  17. an experimental investigation into the explosive forming of square ...

    African Journals Online (AJOL)

    ES Obe

    1981-03-01

    Mar 1, 1981 ... The explosive forming of steel blanks into a perforated square die of side 200 mm and depth 40 mm has been investigated. ... quantity of explosive needed for successful forming. The results also show that the indentation of ..... the Use of. Vented Dies in Explosive Forming of. Metal Sheets" ,Presented at the.

  18. Recent Advances in the Synthesis of High Explosive Materials

    Directory of Open Access Journals (Sweden)

    Jesse J. Sabatini

    2015-12-01

    Full Text Available This review discusses the recent advances in the syntheses of high explosive energetic materials. Syntheses of some relevant modern primary explosives and secondary high explosives, and the sensitivities and properties of these molecules are provided. In addition to the synthesis of such materials, processing improvement and formulating aspects using these ingredients, where applicable, are discussed in detail.

  19. 49 CFR 173.57 - Acceptance criteria for new explosives.

    Science.gov (United States)

    2010-10-01

    ... appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid explosive; or (3) During... 49 Transportation 2 2010-10-01 2010-10-01 false Acceptance criteria for new explosives. 173.57...

  20. 30 CFR 77.304 - Explosion release vents.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosion release vents. 77.304 Section 77.304... Dryers § 77.304 Explosion release vents. Drying chambers, dry-dust collectors, ductwork connecting dryers... explosion release vents which open directly to the outside atmosphere, and all such vents shall be: (a...

  1. 30 CFR 19.7 - Protection against explosion hazard.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protection against explosion hazard. 19.7..., EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC CAP LAMPS § 19.7 Protection against explosion hazard. Unless properly designed, electric cap lamps may present two sources of probable explosion hazards...

  2. A model to assess dust explosion occurrence probability.

    Science.gov (United States)

    Hassan, Junaid; Khan, Faisal; Amyotte, Paul; Ferdous, Refaul

    2014-03-15

    Dust handling poses a potential explosion hazard in many industrial facilities. The consequences of a dust explosion are often severe and similar to a gas explosion; however, its occurrence is conditional to the presence of five elements: combustible dust, ignition source, oxidant, mixing and confinement. Dust explosion researchers have conducted experiments to study the characteristics of these elements and generate data on explosibility. These experiments are often costly but the generated data has a significant scope in estimating the probability of a dust explosion occurrence. This paper attempts to use existing information (experimental data) to develop a predictive model to assess the probability of a dust explosion occurrence in a given environment. The pro-posed model considers six key parameters of a dust explosion: dust particle diameter (PD), minimum ignition energy (MIE), minimum explosible concentration (MEC), minimum ignition temperature (MIT), limiting oxygen concentration (LOC) and explosion pressure (Pmax). A conditional probabilistic approach has been developed and embedded in the proposed model to generate a nomograph for assessing dust explosion occurrence. The generated nomograph provides a quick assessment technique to map the occurrence probability of a dust explosion for a given environment defined with the six parameters. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Forensic analysis of explosions: Inverse calculation of the charge mass

    NARCIS (Netherlands)

    Voort, M.M. van der; Wees, R.M.M. van; Brouwer, S.D.; Jagt-Deutekom, M.J. van der; Verreault, J.

    2015-01-01

    Forensic analysis of explosions consists of determining the point of origin, the explosive substance involved, and the charge mass. Within the EU fP7 project Hyperion, TNO developed the Inverse Explosion Analysis (TNO-IEA) tool to estïmate the charge mass and point of origin based on observed damage

  4. 30 CFR 75.1311 - Transporting explosives and detonators.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Transporting explosives and detonators. 75.1311... Transporting explosives and detonators. (a) When explosives and detonators are to be transported underground... transported by any cars or vehicles— (1) The cars or vehicles shall be marked with warnings to identify the...

  5. 27 CFR 555.63 - Explosives magazine changes.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Explosives magazine... § 555.63 Explosives magazine changes. (a) General. (1) The requirements of this section are applicable to magazines used for other than temporary (under 24 hours) storage of explosives. (2) A magazine is...

  6. Increase of water resistance of ammonium nitrate explosives

    OpenAIRE

    Zulkhair Mansurov; Y. Kazakov; Roza Abdulkarimova; A. Kosmaganbetova

    2012-01-01

    Developed a method of kapsulating of ammonium nitrate with liquid paraffin increase finding explosives in water for 60 minutes. Placing explosives in the plastic shell, the explosive was, as in standing or running water during the day. When conducting field tests failures were absent.

  7. Fluid Interactions with Explosion-Induced Fractures

    Science.gov (United States)

    Swanson, E.; Sussman, A. J.; Wilson, J.; Broome, S.

    2016-12-01

    Fluids can chemically interact with the fractures they flow through, a process that may affect the movement of fluids in the subsurface. This is a topic of interest to a large variety of research areas, including (but not limited to) production of oil and gas, contaminant tracking, geothermal energy production, CO2 sequestration, and nuclear test monitoring. A study performed as part of the Source Physics Experiment, designed to look at the effects of underground chemical explosions, provides a rare opportunity to compare cores from pre-shot and post-shot rock, from damage created in situ. We present data on the variability of microfracture density with distance from the explosion, as well as the occurrence of fractures that either open or contain clay infill. We find that both open and filled fractures occur more frequently within the post-shot samples (by a factor of up to 4x), with similar spatial distributions. This calls into question the validity of the commonly made assumption that all filled fractures were present prior to the explosive shot, and only open fractures can represent explosion-induced damage. These results suggest that fluid-rock interactions might have a significant influence on the permeabilities that result from explosions, even within a few weeks. Additional data on the mechanical properties of the pre-shot and post-shot core samples show an unexpected pattern during unconfined compressive strength tests: the samples retrieved following 2 successive shots failed at higher stresses than did samples retrieved after 1 shot. We present these results, along with some evidence this behavior may arise from trace differences in water content during testing.

  8. Action Replay of Powerful Stellar Explosion

    Science.gov (United States)

    2008-03-01

    Astronomers have made the best ever determination of the power of a supernova explosion that was visible from Earth long ago. By observing the remnant of a supernova and a light echo from the initial outburst, they have established the validity of a powerful new method for studying supernovas. Using data from NASA's Chandra X-ray Observatory, ESA's XMM-Newton Observatory, and the Gemini Observatory, two teams of researchers studied the supernova remnant and the supernova light echo that are located in the Large Magellanic Cloud (LMC), a small galaxy about 160,000 light years from Earth. They concluded that the supernova occurred about 400 years ago (in Earth’s time frame), and was unusually bright and energetic. X-ray Image of SNR 0509-67.5 X-ray Image of SNR 0509-67.5 This result is the first time two methods - X-ray observations of a supernova remnant and optical observations of the expanding light echoes from the explosion - have both been used to estimate the energy of a supernova explosion. Up until now, scientists had only made such an estimate using the light seen soon after a star exploded, or using remnants that are several hundred years old, but not from both. "People didn't have advanced telescopes to study supernovas when they went off hundreds of years ago," said Armin Rest of Harvard University, who led the light echo observations using Gemini. "But we've done the next best thing by looking around the site of the explosion and constructing an action replay of it." People Who Read This Also Read... Milky Way's Super-efficient Particle Accelerators Caught in The Act Oldest Known Objects Are Surprisingly Immature Discovery of Most Recent Supernova in Our Galaxy NASA Unveils Cosmic Images Book in Braille for Blind Readers In 2004, scientists used Chandra to determine that a supernova remnant, known as SNR 0509-67.5 in the LMC, was a so-called Type Ia supernova, caused by a white dwarf star in a binary system that reaches a critical mass and explodes. In

  9. 27 CFR 555.180 - Prohibitions relating to unmarked plastic explosives.

    Science.gov (United States)

    2010-04-01

    ...) Plastic explosive means an explosive material in flexible or elastic sheet form formulated with one or... unmarked plastic explosives. 555.180 Section 555.180 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE EXPLOSIVES COMMERCE IN EXPLOSIVES...

  10. Development in the Detection and Identification of Explosive Residues.

    Science.gov (United States)

    Beveridge, A D

    1992-06-01

    In the past 2 decades, developments in the sensitivity and selectivity of instrument detectors have significantly improved the detection limits for explosives, particularly nitrated organic compounds. Significant improvements have also been made in clean up and recovery procedures for explosive residues. Methods which also have met the criterion of proven effectiveness in identifying explosive components in "real-world" residues from test explosions have been incorporated into systematic analysis protocols for explosive residues. This article first reviews developments in the application of both traditional and novel methods to analysis of unreacted explosives and explosive residues. Compounds used to formulate commercial, military, and "homemade" explosives are then cross-referenced to the analytical methods that have been specifically applied to them, both as pure chemicals and in explosive mixtures. The subsequent focus is on the combinations of methods used to systematically analyze and positively identify residues from improvised explosive devices, from handswabs derived from persons suspected of handling explosives, and from organic gunshot residue. Technology is available to positively identify virtually any unreacted explosive in residue, but no one method can detect all components of all explosives. Investigators and the courts are best served by well-equipped forensic science laboratories staffed with scientists who have gained experience by the successful analysis of post-blast residues from an explosives range and have comprehensive reference collections of physical material, analytical data, and literature. The greatest progress has been made with respect to nitrated organic compounds, but the new generation of commercial explosive slurries and emulsions which are primarily formulated with inorganic salts and non-nitrated organic compounds offer an ongoing challenge. Copyright © 1992 Central Police University.

  11. Extensive range overlap between heliconiine sister species: evidence for sympatric speciation in butterflies?

    Science.gov (United States)

    Rosser, Neil; Kozak, Krzysztof M; Phillimore, Albert B; Mallet, James

    2015-06-30

    Sympatric speciation is today generally viewed as plausible, and some well-supported examples exist, but its relative contribution to biodiversity remains to be established. We here quantify geographic overlap of sister species of heliconiine butterflies, and use age-range correlations and spatial simulations of the geography of speciation to infer the frequency of sympatric speciation. We also test whether shifts in mimetic wing colour pattern, host plant use and climate niche play a role in speciation, and whether such shifts are associated with sympatry. Approximately a third of all heliconiine sister species pairs exhibit near complete range overlap, and analyses of the observed patterns of range overlap suggest that sympatric speciation contributes 32%-95% of speciation events. Müllerian mimicry colour patterns and host plant choice are highly labile traits that seem to be associated with speciation, but we find no association between shifts in these traits and range overlap. In contrast, climatic niches of sister species are more conserved. Unlike birds and mammals, sister species of heliconiines are often sympatric and our inferences using the most recent comparative methods suggest that sympatric speciation is common. However, if sister species spread rapidly into sympatry (e.g. due to their similar climatic niches), then assumptions underlying our methods would be violated. Furthermore, although we find some evidence for the role of ecology in speciation, ecological shifts did not show the associations with range overlap expected under sympatric speciation. We delimit species of heliconiines in three different ways, based on "strict and " "relaxed" biological species concepts (BSC), as well as on a surrogate for the widely-used "diagnostic" version of the phylogenetic species concept (PSC). We show that one reason why more sympatric speciation is inferred in heliconiines than in birds may be due to a different culture of species delimitation in the two

  12. DOE TMD transportation training module 14 transportation of explosives

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, R.L. Jr.

    1994-07-01

    The Department of Energy Transportation Management Division has developed training module 14, entitled {open_quotes}Transportation of Explosives{close_quotes} to compliment the basic {open_quotes}core ten{close_quotes} training modules of the Hazardous Materials Modular Training Program. The purpose of this training module is to increase awareness of the Department of Transportation (DOT) requirements concerning the packaging and transportation of explosives. Topics covered in module 14 include the classification of explosives, approval and registration of explosives, packaging requirements, hazard communication requirements, separation and segregation compatibility requirements, loading and unloading operations, as well as safety measures required in the event of a vehicle accident involving explosives.

  13. DETERMINATION OF FIRE AND EXPLOSION CHARACTERISTICS OF DUST

    Directory of Open Access Journals (Sweden)

    Matej MENČÍK

    2016-12-01

    Full Text Available The aim of this paper is to approximate danger of dust clouds normally occur by determining their explosion characteristics. Nowadays, dusty environment is phenomenon in the industry. In general, about 70% of dust produced is explosive. Dust reduction in companies is the main purpose of the national and European legislative. Early identification and characterization of dust in companies may reduce the risk of explosion. It could be used to identify hazards in industrial production where an explosive dust is produced. For this purpose several standards for identification and characterization of explosion characteristics of industrial dust are being used.

  14. EXPLOSION OF ANNULAR CHARGE ON DUSTY SURFASE

    Directory of Open Access Journals (Sweden)

    A. Levin Vladimir

    2017-01-01

    Full Text Available This problem is related to the safety problem in the area of forest fires. It is well known that is possible to extinguish a fire, for example, by means of a powerful air stream. Such flow arises from the explosive shock wave. To enhance the im- pact of the blast wave can be used an explosive charge of annular shape. The shock wave, produced by the explosion, in- creased during moves to the center and can serve as a means of transportation dust in the seat of the fire. In addition, emerging after the collapse of a converging shock wave strong updraft can raise dust on a greater height and facilitate fire extinguishing, precipitating dust over a large area. This updraft can be dangerous for aircraft that are in the sky above the fire. To determine the width and height of the danger zone performed the numerical simulation of the ring of the explosion and the subsequent movement of dust and gas mixtures. The gas is considered ideal and perfect. The explosion is modeled as an instantaneous increase in the specific internal energy in an annular zone on the value of the specific heat of explosives. The flow is consid- ered as two-dimensional, and axisymmetric. The axis of symmetry perpendicular to the Earth surface. This surface is considered to be absolutely rigid and is considered as the boundary of the computational domain. On this surface is exhibited the condition of no motion. For the numerical method S. K. Godunov is used a movable grid. One system of lines of this grid is moved in accordance with movement of the shock wave. Others lines of this grid are stationary. The calculations were per- formed for different values of the radii of the annular field and for different sizes of rectangular cross-sectional of the annular field. Numerical results show that a very strong flow is occurring near the axis of symmetry and the particles rise high above the surface. These calculations allow us to estimate the sizes of the zone of danger in specific

  15. Inelastic processes in seismic wave generation by underground explosions

    Energy Technology Data Exchange (ETDEWEB)

    Rodean, H.C.

    1980-08-01

    Theories, computer calculations, and measurements of spherical stress waves from explosions are described and compared, with emphasis on the transition from inelastic to almost-elastic relations between stress and strain. Two aspects of nonspherical explosion geometry are considered: tectonic strain release and surface spall. Tectonic strain release affects the generation of surface waves; spall closure may also. The reduced-displacement potential is a common solution (the equivalent elastic source) of the forward and inverse problems, assuming a spherical source. Measured reduced-displacement potentials are compared with potentials calculated as solutions of the direct and inverse problems; there are significant differences between the results of the two types of calculations and between calculations and measurements. The simple spherical model of an explosion is not sufficient to account for observations of explosions over wide ranges of depth and yield. The explosion environment can have a large effect on explosion detection and yield estimation. The best sets of seismic observations for use in developing discrimination techniques are for high-magnitude high-yield explosions; the identification problem is most difficult for low-magnitude low-yield explosions. Most of the presently available explosion data (time, medium, depth, yield, etc.) are for explosions in a few media at the Nevada Test Site; some key questions concerning magnitude vs yield and m/sub b/ vs M/sub s/ relations can be answered only by data for explosions in other media at other locations.

  16. Explosion characteristics of flammable organic vapors in nitrous oxide atmosphere.

    Science.gov (United States)

    Koshiba, Yusuke; Takigawa, Tomihisa; Matsuoka, Yusaku; Ohtani, Hideo

    2010-11-15

    Despite unexpected explosion accidents caused by nitrous oxide have occurred, few systematic studies have been reported on explosion characteristics of flammable gases in nitrous oxide atmosphere compared to those in air or oxygen. The objective of this paper is to characterize explosion properties of mixtures of n-pentane, diethyl ether, diethylamine, or n-butyraldehyde with nitrous oxide and nitrogen using three parameters: explosion limit, peak explosion pressure, and time to the peak explosion pressure. Then, similar mixtures of n-pentane, diethyl ether, diethylamine, or n-butyraldehyde with oxygen and nitrogen were prepared to compare their explosion characteristics with the mixtures containing nitrous oxide. The explosion experiments were performed in a cylindrical vessel at atmospheric pressure and room temperature. The measurements showed that explosion ranges of the mixtures containing nitrous oxide were narrow compared to those of the mixtures containing oxygen. On the other hand, the maximum explosion pressures of the mixtures containing nitrous oxide were higher than those of the mixtures containing oxygen. Moreover, our experiments revealed that these mixtures differed in equivalence ratios at which the maximum explosion pressures were observed: the pressures of the mixtures containing nitrous oxide were observed at stoichiometry; in contrast, those of the mixtures containing oxygen were found at fuel-rich area. Chemical equilibrium calculations confirmed these behaviors. Copyright © 2010 Elsevier B.V. All rights reserved.

  17. Nickel speciation in cement-stabilized/solidified metal treatment filtercakes

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Amitava, E-mail: reroy@lsu.edu [J. Bennett Johnston, Sr., Center for Advanced Microstructures and Devices, Louisiana State University, Baton Rouge, LA 70806, USA (United States); Stegemann, Julia A., E-mail: j.stegemann@ucl.ac.uk [Centre for Resource Efficiency & the Environment, Department of Civil, Environmental & Geomatic Engineering, University College London, Chadwick Building, Gower Street, London WC1E 6BT, UK (United Kingdom)

    2017-01-05

    Highlights: • XAS shows the same Ni speciation in untreated and stabilized/solidified filtercake. • Ni solubility is the same for untreated and stabilized/solidified filtercake. • Leaching is controlled by pH and physical encapsulation for all binders. - Abstract: Cement-based stabilization/solidification (S/S) is used to decrease environmental leaching of contaminants from industrial wastes. In this study, two industrial metal treatment filtercakes were characterized by X-ray diffractometry (XRD), thermogravimetric and differential thermogravimetric analysis (TG/DTG) and Fourier transform infrared (FTIR); speciation of nickel was examined by X-ray absorption (XAS) spectroscopy. Although the degree of carbonation and crystallinity of the two untreated filtercakes differed, α-nickel hydroxide was identified as the primary nickel-containing phase by XRD and nickel K edge XAS. XAS showed that the speciation of nickel in the filtercake was unaltered by treatment with any of five different S/S binder systems. Nickel leaching from the untreated filtercakes and all their stabilized/solidified products, as a function of pH in the acid neutralization capacity test, was essentially complete below pH ∼5, but was 3–4 orders of magnitude lower at pH 8–12. S/S does not respeciate nickel from metal treatment filtercakes and any reduction of nickel leaching by S/S is attributable to pH control and physical mechanisms only. pH-dependent leaching of Cr, Cu and Ni is similar for the wastes and s/s products, except that availability of Cr, Cu and Zn at decreased pH is reduced in matrices containing ground granulated blast furnace slag.

  18. Genetic evidence for hybrid trait speciation in heliconius butterflies.

    Directory of Open Access Journals (Sweden)

    Camilo Salazar

    2010-04-01

    Full Text Available Homoploid hybrid speciation is the formation of a new hybrid species without change in chromosome number. So far, there has been a lack of direct molecular evidence for hybridization generating novel traits directly involved in animal speciation. Heliconius butterflies exhibit bright aposematic color patterns that also act as cues in assortative mating. Heliconius heurippa has been proposed as a hybrid species, and its color pattern can be recreated by introgression of the H. m. melpomene red band into the genetic background of the yellow banded H. cydno cordula. This hybrid color pattern is also involved in mate choice and leads to reproductive isolation between H. heurippa and its close relatives. Here, we provide molecular evidence for adaptive introgression by sequencing genes across the Heliconius red band locus and comparing them to unlinked wing patterning genes in H. melpomene, H. cydno, and H. heurippa. 670 SNPs distributed among 29 unlinked coding genes (25,847bp showed H. heurippa was related to H. c. cordula or the three species were intermixed. In contrast, among 344 SNPs distributed among 13 genes in the red band region (18,629bp, most showed H. heurippa related with H. c. cordula, but a block of around 6,5kb located in the 3' of a putative kinesin gene grouped H. heurippa with H. m. melpomene, supporting the hybrid introgression hypothesis. Genealogical reconstruction showed that this introgression occurred after divergence of the parental species, perhaps around 0.43Mya. Expression of the kinesin gene is spatially restricted to the distal region of the forewing, suggesting a mechanism for pattern regulation. This gene therefore constitutes the first molecular evidence for adaptive introgression during hybrid speciation and is the first clear candidate for a Heliconius wing patterning locus.

  19. Seismic and source characteristics of large chemical explosions. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Adushkin, V.V.; Kostuchenko, V.N.; Pernik, L.M.; Sultanov, D.D.; Zcikanovsky, V.I.

    1995-01-01

    From the very beginning of its arrangement in 1947, the Institute for Dynamics of the Geospheres RAS (former Special Sector of the Institute for physics of the Earth, RAS) was providing scientific observations of effects of nuclear explosions, as well as large-scale detonations of HE, on environment. This report presents principal results of instrumental observations obtained from various large-scale chemical explosions conducted in the Former-Soviet Union in the period of time from 1957 to 1989. Considering principal aim of the work, tamped and equivalent chemical explosions have been selected with total weights from several hundreds to several thousands ton. In particular, the selected explosions were aimed to study scaling law from excavation explosions, seismic effect of tamped explosions, and for dam construction for hydropower stations and soil melioration. Instrumental data on surface explosions of total weight in the same range aimed to test military technics and special objects are not included.

  20. Numerical simulation of explosive welding using Smoothed Particle Hydrodynamics method

    Directory of Open Access Journals (Sweden)

    J Feng

    2017-09-01

    Full Text Available In order to investigate the mechanism of explosive welding and the influences of explosive welding parameters on the welding quality, this paper presents numerical simulation of the explosive welding of Al-Mg plates using Smoothed Particle Hydrodynamics method. The multi-physical phenomena of explosive welding, including acceleration of the flyer plate driven by explosive detonation, oblique collision of the flyer and base plates, jetting phenomenon and the formation of wavy interface can be reproduced in the simulation. The characteristics of explosive welding are analyzed based on the simulation results. The mechanism of wavy interface formation is mainly due to oscillation of the collision point on the bonding surfaces. In addition, the impact velocity and collision angle increase with the increase of the welding parameters, such as explosive thickness and standoff distance, resulting in enlargement of the interfacial waves.

  1. One-Dimensional Time to Explosion (Thermal Sensitivity) of ANPZ

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hust, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McClelland, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gresshoff, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-11-12

    Incidents caused by fire and combat operations can heat energetic materials that may lead to thermal explosion and result in structural damage and casualty. Some explosives may thermally explode at fairly low temperatures (< 100 C) and the violence from thermal explosion may cause a significant damage. Thus it is important to understand the response of energetic materials to thermal insults. The One Dimensional Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory has been used for decades to measure times to explosion, threshold thermal explosion temperature, and determine kinetic parameters of energetic materials. Samples of different configurations (pressed part, powder, paste, and liquid) can be tested in the system. The ODTX testing can also provide useful data for assessing the thermal explosion violence of energetic materials. This report summarizes the recent ODTX experimental data and modeling results for 2,6-diamino-3,5-dintropyrazine (ANPZ).

  2. Analysis of the internal explosion affecting building barriers

    Directory of Open Access Journals (Sweden)

    Jarosław Siwiński

    2015-06-01

    Full Text Available In this paper we considered the action of an internal explosion onto building barriers. Determination of the maximum peak pressure on the forehead of an internal wave explosion was presented on the basis of the analysis of reflected waves. Variability in time of the action of an internal explosion describes overpressure phase only. Load analysis of internal cargo detonation was carried out for the standard atmosphere undisturbed conditions. We developed the tabulated algorithm for determination of loadings taking into account the geometric characteristics of the building barriers and rooms in which the detonation occurs and parameters of explosion environment.[b]Keywords[/b]: civil engineering, explosive actions, internal explosion, concentrate explosive

  3. Speciated organic VOC and PM emissions from peat burns

    Science.gov (United States)

    Supporting information Tables S3 and S4 list emission factors in g/kg of speciated volatile and particulate organic compounds emitted from peat burning. Peat samples were acquired from Alligator River (AR) and Pocosin Lakes (PL) National Wildlife Refuges. This dataset is associated with the following publication:George , I., R. Black, J. Walker , C. Geron , J. Aurell , M. Hays , W. Preston, and B. Gullett. Volatile and semivolatile organic compounds in laboratory peat fire emissions. ATMOSPHERIC ENVIRONMENT. Elsevier Science Ltd, New York, NY, USA, 132: 163-170, (2016).

  4. Specific features of explosive decomposition of pentaerythritol tetranitrate exposed to an electron beam with an explosive emission cathode

    Science.gov (United States)

    Aduev, B. P.; Belokurov, G. M.; Krechetov, A. G.; Liskov, I. Yu.

    2017-07-01

    A comparative examination of the critical energy density of explosive decomposition of pentaerythritol tetranitrate exposed either to an electron beam of a GIN-600 accelerator (240 keV, 20 ns) with an explosive emission cathode or to this beam combined with metal low-temperature diode plasma has been performed. It has been demonstrated that the contribution of plasma to the development of explosive decomposition is appreciable at explosion probabilities P ≤ 0.2. At higher energy densities and explosion probabilities P ≥ 0.5, the contribution of plasma to the overall beam energy density did not exceed 10%.

  5. Cold Temperature Effects on Speciated VOC Emissions from modern GDI Light Duty Truck

    Science.gov (United States)

    Although gasoline direct injection (GDI) vehicles represent nearly half of the light-duty vehicle market share, few studies have reported speciated volatile organic compounds (VOCs) in GDI vehicle exhaust emissions. In this study, speciated VOC emissions were characterized from t...

  6. Chemical speciation and bioavailability of heavy metals in soil and surface water

    NARCIS (Netherlands)

    Kalis, E.J.J.

    2006-01-01

    Keywords:Metal speciation, Bioavailability, Lolium perenne , Free metal ion, Donnan Membrane Technique, Humic acid, Metal uptake, Speciation techniques, Competition, Soil (solution)

  7. Method for Vanadium Speciation in Aqueous Samples by HPLC-ICP ...

    African Journals Online (AJOL)

    Method for Vanadium Speciation in Aqueous Samples by HPLC-ICP-OES. M Hu, PP Coetzee. Abstract. A method for vanadium speciation is proposed. The method uses a low concentration eluent, 10 mmol L–1 EDTA and 14 mmol L–1 sodium carbonate, for the ion chromatographic separation of vanadium species at a ...

  8. GEOCHEM-EZ: a chemical speciation program with greater power and flexibility

    Science.gov (United States)

    GEOCHEM –EZ is a multi-functional chemical speciation program, which was designed to replace the existing GEOCHEM-PC, a program that can only be used on DOS consoles. Chemical speciation programs, such as GEOCHEM (Sposito and Mattigod, 1980) and GEOCHEM-PC (Parker et al., 1995), have been excellent ...

  9. Monitoring metal speciation in the rivers meuse and rhine using DGT

    NARCIS (Netherlands)

    Cleven, Rob; Nur, Yusuf; Krystek, Petra; Van Den Berg, Gerard

    Although a number of metal speciation methods are nowadays available, most water quality regulations are based on total metal concentrations. One of the main reasons for the ignorance of speciation is the lack of methods with potentiality for monitoring. Conditions that have to be met by such

  10. Evolution of blind beetles in isolated aquifers: a test of alternative modes of speciation

    NARCIS (Netherlands)

    Leys, R.; Nes, van E.H.; Watts, C.H.; Cooper, S.J.B.; Humphreys, W.F.; Hogendoorn, K.

    2012-01-01

    Evidence is growing that not only allopatric but also sympatric speciation can be important in the evolution of species. Sympatric speciation has most convincingly been demonstrated in laboratory experiments with bacteria, but field-based evidence is limited to a few cases. The recently discovered

  11. Speciation analysis of 129I in seawater using coprecipitation and accelerator mass spectrometry and its applications

    DEFF Research Database (Denmark)

    Xing, Shan; Hou, Xiaolin; Aldahan, Ala

    2017-01-01

    Speciation analysis of long-lived 129I in seawater can provide useful information on the source of water masses. This paper presents an improved method for speciation analysis of 129I based on coprecipitation of iodide as AgI with Ag2SO3 and AgCl. By adding a small amount of 127I carrier, the sep...

  12. HPLC inorganic arsenic speciation analysis of samples containing high sulfuric acid and iron levels

    NARCIS (Netherlands)

    Gonzalez-Contreras, P.A.; Gerrits, I.P.A.M.; Weijma, J.; Buisman, C.J.N.

    2011-01-01

    To monitor the oxidation of arsenite to arsenate in oxidizing and bioleaching reactors, speciation analysis of the inorganic arsenic compounds is required. Existing arsenic speciation analysis techniques are based on the use of liquid chromatography columns coupled to detector equipment such as

  13. Seismic explosion sources on an ice cap

    DEFF Research Database (Denmark)

    Shulgin, Alexey; Thybo, Hans

    2015-01-01

    Controlled source seismic investigation of crustal structure below ice covers is an emerging technique. We have recently conducted an explosive refraction/wide-angle reflection seismic experiment on the ice cap in east-central Greenland. The data-quality is high for all shot points and a full...... crustal model can be modelled. A crucial challenge for applying the technique is to control the sources. Here, we present data that describe the efficiency of explosive sources in the ice cover. Analysis of the data shows, that the ice cap traps a significant amount of energy, which is observed...... as a strong ice wave. The ice cap leads to low transmission of energy into the crust such that charges need be larger than in conventional onshore experiments to obtain reliable seismic signals. The strong reflection coefficient at the base of the ice generates strong multiples which may mask for secondary...

  14. Initiation and Propagation in Primary Explosives

    Science.gov (United States)

    Dickson, P. M.; Field, J. E.

    1993-05-01

    The initiation and propagation of deflagration and detonation in mercury fulminate, lead azide, mercuric-5-nitrotetrazole and silver-5-nitrotetrazole have been studied using various techniques. Streak and framing high-speed photography were used to observe these events directly. The main aim has been to investigate the factors which affect deflagration-to-detonation transition (DDT) and the related phenomenon of dead-pressing, which may be regarded as a failure of the DDT process at high pressed densities. These factors include the variable properties of pressed density, void structure, confinement and charge dimension and geometry, and also fixed properties (for a given explosive) such as shock and thermal sensitivities, heat of explosion and the quantity and state of the reaction products. The nature and strength of the initiating stimulus also have a major effect on the subsequent reaction.

  15. Ignitability and explosibility of gases and vapors

    CERN Document Server

    Ma, Tingguang

    2015-01-01

    The book provides a systematic view on flammability and a collection of solved engineering problems in the fields of dilution and purge, mine gas safety, clean burning safety and gas suppression modeling. For the first time, fundamental principles of energy conservation are used to develop theoretical flammability diagrams and are then explored to understand various safety-related mixing problems. This provides the basis for a fully-analytical solution to any flammability problem. Instead of the traditional view that flammability is a fundamental material property, here flammability is discovered to be a result of the explosibility of air and the ignitability of fuel, or a process property. By exploring the more fundamental concepts of explosibility and ignitability, the safety targets of dilution and purge can be better defined and utilized for guiding safe operations in process safety. This book provides various engineering approaches to mixture flammability, benefiting not only the safety students, but al...

  16. Study on Explosive Forming of Aluminum Alloy

    Directory of Open Access Journals (Sweden)

    H Iyama

    2016-09-01

    Full Text Available Now, the aluminum alloy is often used as auto parts, for example, body, engine. For example, there are the body, a cylinder block, a piston, a connecting rod, interior, exterior parts, etc. These are practical used the characteristic of a light and strong aluminum alloy efficiently. However, although an aluminum alloy is lighter than steel, the elongation is smaller than that. Therefore, in press forming, some problems often occur. We have proposed use of explosive forming, in order to solve this problem. In the explosive forming, since a blank is formed at high speed, a strain rate effect becomes large and it can be made the elongation is larger. Then, in order to clarify this feature, we carried out experimental research and numerical analysis. In this paper, these contents will be discussed.

  17. Lower head integrity under steam explosion loads

    Energy Technology Data Exchange (ETDEWEB)

    Theofanous, T.G.; Yuen, W.W.; Angelini, S.; Freeman, K.; Chen, X.; Salmassi, T. [Center for Risk Studies and Safety, Univ. of California, Santa Barbara, CA (United States); Sienicki, J.J.

    1998-01-01

    Lower head integrity under steam explosion loads in an AP600-like reactor design is considered. The assessment is the second part of an evaluation of the in-vessel retention idea as a severe accident management concept, the first part (DOE/ID-10460) dealing with thermal loads. The assessment is conducted in terms of the Risk Oriented Accident Analysis Methodology (ROAAM), and includes the comprehensive evaluation of all relevant severe accident scenarios, melt conditions and timing of release from the core region, fully 3D mixing and explosion wave dynamics, and lower head fragility under local, dynamic loading. All of these factors and brought together in a ROAAM Probabilistic Framework to evaluate failure likelihood. The conclusion is that failure is `physically unreasonable`. (author)

  18. The First Man-Made Nuclear Explosion

    Science.gov (United States)

    Worth Seagondollar, L.

    2004-10-01

    This talk is part Nuclear Physics, part description of the greatest war-time experience possible for a young graduate student, and part eye-witness description of the 1945 plutonium fission devise explosion in the New Mexico desert. Living and working in the secret Manhattan District laboratory was truly unique. Hearing talks by Nobel Laureates (past & future), participating in nuclear experiments that determined the critical masses for U-235 and Pu-239, having near-catastrophic accidents, working with an armed guard watching you, having Enrico Fermi ask you to come to his office--these are unforgettable memories. There will be a description of 3 days in the New Mexico desert and a description of the early morning nuclear explosion at the Trinity Site and a description of that Site 30 days later.

  19. SERS substrate for detection of explosives.

    Science.gov (United States)

    Chou, Alison; Jaatinen, Esa; Buividas, Ricardas; Seniutinas, Gediminas; Juodkazis, Saulius; Izake, Emad L; Fredericks, Peter M

    2012-12-07

    A novel gold coated femtosecond laser nanostructured sapphire surface - an "optical nose" - based on surface-enhanced Raman spectroscopy (SERS) for detecting vapours of explosive substances was investigated. Four different nitroaromatic vapours at room temperature were tested. Sensor responses were unambiguous and showed response in the range of 0.05-15 μM at 25 °C. The laser fabricated substrate nanostructures produced up to an eight-fold increase in Raman signal over that observed on the unstructured portions of the substrate. This work demonstrates a simple sensing system that is compatible with commercial manufacturing practices to detect taggants in explosives which can undertake as part of an integrated security or investigative mission.

  20. Quantum cascade laser FM spectroscopy of explosives

    Science.gov (United States)

    Gutmann, Zach; Clasp, Trocia; Lue, Chris; Johnson, Tiffani; Ingle, Taylor; Jamison, Janet; Buchanan, Roger; Reeve, Scott

    2013-05-01

    Polyisobutylene is an industrial polymer that is widely used in a number of applications including the manufacture of military grade explosives. We have examined the vapor emanating from a series of different molecular weight samples of polyisobutylene using high resolution Quantum Cascade Laser FM spectroscopy. The vapor phase spectra all exhibit a rovibrational structure similar to that for the gas phase isobutylene molecule. We have assigned the structure in the 890 cm-1 and 1380 cm-1 regions to the isobutylene ν28 and ν7 fundamental bands respectively. These spectroscopic signatures may prove useful for infrared sensing applications. Here we will present the infrared signatures along with recent GCMS data from a sample of C4, utilizing solid-phase microextraction vapor collection fibers, which confirm the presence of isobutylene as one of the volatile bouquet species in RDX-based explosives.

  1. Explosive magnetorotational instability in Keplerian disks

    Energy Technology Data Exchange (ETDEWEB)

    Shtemler, Yu., E-mail: shtemler@bgu.ac.il; Liverts, E., E-mail: eliverts@bgu.ac.il; Mond, M., E-mail: mond@bgu.ac.il [Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel)

    2016-06-15

    Differentially rotating disks under the effect of axial magnetic field are prone to a nonlinear explosive magnetorotational instability (EMRI). The dynamic equations that govern the temporal evolution of the amplitudes of three weakly detuned resonantly interacting modes are derived. As distinct from exponential growth in the strict resonance triads, EMRI occurs due to the resonant interactions of an MRI mode with stable Alfvén–Coriolis and magnetosonic modes. Numerical solutions of the dynamic equations for amplitudes of a triad indicate that two types of perturbations behavior can be excited for resonance conditions: (i) EMRI which leads to infinite values of the three amplitudes within a finite time, and (ii) bounded irregular oscillations of all three amplitudes. Asymptotic explicit solutions of the dynamic equations are obtained for EMRI regimes and are shown to match the numerical solutions near the explosion time.

  2. Electronic Nose for Detection of Explosives.

    Science.gov (United States)

    Oakes, Landon; Dobrokhotov, Vladimir

    2010-03-01

    The ability to sense the environment is of critical importance for a broad array of applications ranging from ecosystem health, hazardous materials avoidance/chemical warfare to medical applications. In this research project we use the self-assembled monolayer (SAM)-functionalized nanoparticle-decorated nanosprings as a novel design for sensing vapors associated with explosives. The common requirements for any sensor application are sensitivity, selectivity, refreshability, repeatability, low cost of manufacture, and ease of use. The project goal is to answer these needs through the use of mats of functionalized metal nanoparticle-coated nanosprings as a novel type of low-cost nanomaterials-based gas sensor. The advantage of this approach is that very dilute quantities of airborne explosive products can be accumulated over a few seconds to a few minutes onto our high surface area nanospring electrodes. This will facilitate electronic detection, which in contrast to optical detection methods reduces false positive signals, reduces detector sizes and complexity.

  3. Facial trauma caused by electronic cigarette explosion.

    Science.gov (United States)

    Vaught, Brian; Spellman, Joseph; Shah, Anil; Stewart, Alexander; Mullin, David

    2017-03-01

    Electronic cigarettes are increasingly popular as a supposed safer alternative to tobacco cigarettes or a smoking cessation tool. Research and debate have focused primarily on possible adverse effects caused by the inhaled aerosol produced by electronic cigarettes and on smoking cessation efficacy. Few reports in the medical literature describe injuries secondary to device malfunction. We present a case of electronic cigarette explosion, with a projectile fracturing the patient's right naso-orbital-ethmoid complex and anterior and posterior frontal sinus tables, with frontal sinus outflow tract involvement. The patient underwent combined open and endoscopic repair, including open reduction internal fixation, with reconstitution and preservation of the frontal sinus and frontal sinus outflow tract. Additionally, we review the available data on electronic cigarette malfunction-including fires, explosions, associated injuries, and possible reasons for device malfunction-and discuss new 2016 U.S. Food and Drug Administration regulations pertaining to electronic cigarettes.

  4. The November 2009 paroxysmal explosions at Stromboli

    Science.gov (United States)

    Andronico, Daniele; Pistolesi, Marco

    2010-09-01

    Two paroxysmal explosions occurred at Stromboli volcano (Italy) on 8 and 24 November 2009. Analysis of recordings (from video-camera surveillance) indicates that each paroxysm consisted of multiple bursts from different vents. Field surveys, carried out within a few days after the two paroxysmal events, allowed us to gather crucial data on eruptive deposits and document morphological variations occurring at the source vents. Integration of video-analysis and field observations allowed making inferences on the eruptive dynamics of each explosive paroxysm. The 24 November event, in particular, erupted a larger volume and coarser products dispersed further from the summit area, resulting in a more hazardous event compared to the 8 November event that was largely confined to the upper part of the volcano.

  5. Detecting underwater improvised explosive threats (DUIET)

    Science.gov (United States)

    Feeley, Terry

    2010-04-01

    Improvised Explosive Devices (IEDs) have presented a major threat in the wars in Afghanistan and Iraq. These devices are powerful homemade land mines that can be small and easily hidden near roadsides. They are then remotely detonated when Coalition Forces pass by either singly or in convoys. Their rapid detection, classification and destruction is key to the safety of troops in the area. These land based bombs will have an analogue in the underwater theater especially in ports, lakes, rivers and streams. These devices may be used against Americans on American soil as an element of the global war on terrorism (GWOT) Rapid detection and classification of underwater improvised explosive devices (UIED) is critical to protecting innocent lives and maintaining the day to day flow of commerce. This paper will discuss a strategy and tool set to deal with this potential threat.

  6. DOE explosives safety manual. Revision 7

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This manual prescribes the Department of Energy (DOE) safety rules used to implement the DOE safety policy for operations involving explosives. This manual is applicable to all DOE facilities engaged in operations of development, manufacturing, handling, storage, transportation, processing, or testing of explosives, pyrotechnics and propellants, or assemblies containing these materials. The standards of this manual deal with the operations involving explosives, pyrotechnics and propellants, and the safe management of such operations. The design of all new explosives facilities shall conform to the requirements established in this manual and implemented in DOE 6430.1A, ``General Design Criteria Manual.`` It is not intended that existing physical facilities be changed arbitrarily to comply with these provisions, except as required by law. Existing facilities that do not comply with these standards may continue to be used for the balance of their functional life, as long as the current operation presents no significantly greater risk than that assumed when the facility was originally designed and it can be demonstrated clearly that a modification to bring the facility into compliance is not feasible. However, in the case of a major renovation, the facility must be brought into compliance with current standards. The standards are presented as either mandatory or advisory. Mandatory standards, denoted by the words ``shall,`` ``must,`` or ``will,`` are requirements that must be followed unless written authority for deviation is granted as an exemption by the DOE. Advisory standards denoted by ``should`` or ``may`` are standards that may be deviated from with a waiver granted by facility management.

  7. Risk-Based Explosive Safety Analysis

    Science.gov (United States)

    2016-11-30

    REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 30 November 2016 2. REPORT TYPE...Technical Paper 3. DATES COVERED (From - To) 01 November 2016 – 30 November 2016 4. TITLE AND SUBTITLE Risk-Based Explosive Safety Analysis 5a

  8. Explosive Infrasonic Events: Sensor Comparison Experiment (SCE)

    Energy Technology Data Exchange (ETDEWEB)

    Schnurr, J. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Garces, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rodgers, A. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-02-06

    SCE (sensor comparison experiment) 1 through 4 consists of a series of four controlled above-ground explosions designed to provide new data for overpressure propagation. Infrasound data were collected by LLNL iPhones and other sensors. Origin times, locations HOB, and yields are not being released at this time and are therefore not included in this report. This preliminary report will be updated as access to additional data changes, or instrument responses are determined.

  9. Surface detonation in type Ia supernova explosions?

    OpenAIRE

    Roepke, F. K.; Woosley, S. E.

    2006-01-01

    We explore the evolution of thermonuclear supernova explosions when the progenitor white dwarf star ignites asymmetrically off-center. Several numerical simulations are carried out in two and three dimensions to test the consequences of different initial flame configurations such as spherical bubbles displaced from the center, more complex deformed configurations, and teardrop-shaped ignitions. The burning bubbles float towards the surface while releasing energy due to the nuclear reactions. ...

  10. Polyurethane Binder Systems for Polymer Bonded Explosives

    Science.gov (United States)

    2006-12-01

    Trimethylol propane TPB Triphenyl Bismuth DSTO-GD-0492 1. Introduction The desire for increased safety in explosives handling, storage and...HTPB) 7.346 Dioctyl adipate (DOA) 7.346 Antioxidant 2246 (AO) 0.10 N,N 2-Hydroxyethyl dimethyl-hydantoin (DHE) 0.26 Triphenyl bismuth (TBP) 0.02...with water and the liberated acetic acid is titrated against 0.5 N alcoholic potassium hydroxide solution. The following solutions are required

  11. Explosive detection technologies for airline security

    OpenAIRE

    Maruyama, Xavier K.

    2000-01-01

    Aviation safety and security has become a topic of paramount national concern. Informed decision making requires an appreciation of trends in technology in response to projected future terrorist activities. In the area of security, explosive detection is made possible by a bewildering array of newly offered equipment. This document describes the science and engineering of the various technologies. The information presented here was written for airline security, but it applies also to a wi...

  12. Optimization of Composting for Explosives Contaminated Soil

    Science.gov (United States)

    1991-09-30

    required for implementation of j composting as a cost- effective alternative to incineration. All three explosives present at UMDA demonstrated...into the mixture to be composted and/or the contaminants must be degraded at a higher rate. To increase the rates of degradation either more effective ...microorganisms with more effective metabolic pathways/enzymes are available and will function well in a compost matrix), optimizing the composition of the

  13. Composting of Explosives-Contaminated Soil Technology

    Science.gov (United States)

    1989-10-01

    dinitrotoluenes) and to evaluate the influence of temperature upon composting effectiveness . This study demonstrated that the bioconversion of explosives under... effected primarily by mechanical turning of the compost , clcsely regulated temperature regimes in such a system may be difficult to achieve. In aerated...treatment processes, the feasibility and economics of composting will be directly influenced by the length of time required for treatment. Treatment

  14. Dynamic Fracture Simulations of Explosively Loaded Cylinders

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, Carly W. [Univ. of California, Davis, CA (United States). Dept. of Civil and Environmental Engineering; Goto, D. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-11-30

    This report documents the modeling results of high explosive experiments investigating dynamic fracture of steel (AerMet® 100 alloy) cylinders. The experiments were conducted at Lawrence Livermore National Laboratory (LLNL) during 2007 to 2008 [10]. A principal objective of this study was to gain an understanding of dynamic material failure through the analysis of hydrodynamic computer code simulations. Two-dimensional and three-dimensional computational cylinder models were analyzed using the ALE3D multi-physics computer code.

  15. Youngest Stellar Explosion in Our Galaxy Discovered

    Science.gov (United States)

    2008-05-01

    Astronomers have found the remains of the youngest supernova, or exploded star, in our Galaxy. The supernova remnant, hidden behind a thick veil of gas and dust, was revealed by the National Science Foundation's Very Large Array (VLA) and NASA's Chandra X-Ray Observatory, which could see through the murk. The object is the first example of a "missing population" of young supernova remnants. 1985 and 2008 VLA Images Move cursor over image to blink. VLA Images of G1.9+0.3 in 1985 and 2008: Circle for size comparison. CREDIT: Green, et al., NRAO/AUI/NSF From observing supernovae in other galaxies, astronomers have estimated that about three such stellar explosions should occur in our Milky Way every century. However, the most recent one known until now occurred around 1680, creating the remnant called Cassiopeia A. The newly-discovered object is the remnant of an explosion only about 140 years ago. "If the supernova rate estimates are correct, there should be the remnants of about 10 supernova explosions in the Milky Way that are younger than Cassiopeia A," said David Green of the University of Cambridge in the UK, who led the VLA study. "It's great to finally track one of them down." Supernova explosions, which mark the violent death of a star, release tremendous amounts of energy and spew heavy elements such as calcium and iron into interstellar space. They thus seed the clouds of gas and dust from which new stars and planets are formed and, through their blast shocks, can even trigger such formation. The lack of evidence for young supernova remnants in the Milky Way had caused astronomers to wonder if our Galaxy, which appears otherwise normal, differed in some unknown way from others. Alternatively, scientists thought that the "missing" Milky Way supernovae perhaps indicated that their understanding of the relationship between supernovae and other galactic processes was in error. The astronomers made their discovery by measuring the expansion of the debris from

  16. Synthesis of Magnetized Nuclei at Supernova Explosion

    Science.gov (United States)

    Kondratyev, V. N.; Nurtayeva, U. M.; Zhomartova, A. Zh.; Mishenina, T. V.

    Influence of magnetorotational instabilities in astrophysical plasma at supernova explosion on synthesis of chemical elements is investigated. At field strength less than 10 teratesla nuclear magnetic susceptibility exhibits linear regime with enhanced nuclear binding energy for open shell nuclei. Effects of ultra-strong nuclear magnetization are demonstrated to enhance the portion of titanium product. The relation to an excess of titanium isotopes revealed from the Integral mission data and galactic chemical evolution is discussed.

  17. Radioactive Beam Measurements to Probe Stellar Explosions

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Michael Scott [ORNL

    2010-01-01

    Unique beams of unstable nuclei from the Holi eld Radioactive Ion Beam Facility at Oak Ridge National Laboratory are being used to measure the thermonuclear reactions that occur in novae, X-ray bursts, and supernovae. The astrophysical impact of these measurements is determined by synergistic nuclear data evaluations and element synthesis calculations. Results of recent measurements and explosion simulations are brie y described, along with future plans and software research tools for the community.

  18. The Biggest Explosions in the Universe

    Indian Academy of Sciences (India)

    G am m a ray bursts { w hich are ¯rst detected in energetic gam m a rays and w hich then glow in. X -ray, visible and radio w avelengths { are the result of the biggest explosions in the universe. A stronom ers w onder w hat causes these violent events, and som e of their ideas are discussed in th is article. 1. S eren d ip itou s ...

  19. Some properties of explosive mixtures containing peroxides

    Energy Technology Data Exchange (ETDEWEB)

    Zeman, Svatopluk [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, CZ-532 10 Pardubice (Czech Republic)], E-mail: svatopluk.zeman@upce.cz; Trzcinski, Waldemar A. [Institute of Chemistry, Military University of Technology, PL-00-908 Warsaw 49 (Poland); Matyas, Robert [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, CZ-532 10 Pardubice (Czech Republic)

    2008-06-15

    This study concerns mixtures of triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP) and ammonium nitrate (AN) with added water (W), as the case may be, and dry mixtures of TATP with urea nitrate (UN). Relative performances (RP) of the mixtures and their individual components, relative to TNT, were determined by means of ballistic mortar. The detonation energies, E{sub 0}, and detonation velocities, D, were calculated for the mixtures studied by means of the thermodynamic code CHEETAH. Relationships have been found and are discussed between the RP and the E{sub 0} values related to unit volume of gaseous products of detonation of these mixtures. These relationships together with those between RP and oxygen balance values of the mixtures studied indicate different types of participation of AN and UN in the explosive decomposition of the respective mixtures. Dry TATP/UN mixtures exhibit lower RP than analogous mixtures TATP/AN containing up to 25% of water. Depending on the water content, the TATP/AN mixtures possess higher detonability values than the ANFO explosives. A semi-logarithmic relationship between the D values and oxygen coefficients has been derived for all the mixtures studied at the charge density of 1000 kg m{sup -3}. Among the mixtures studied, this relationship distinguishes several samples of the type of 'tertiary explosives' as well as samples that approach 'high explosives' in their performances and detonation velocities.

  20. High Voltage Application of Explosively Formed Fuses

    Energy Technology Data Exchange (ETDEWEB)

    Tasker, D.G.; Goforth, J.H.; Fowler, C.M.; Lopez, E.M.; Oona, H.; Marsh, S.P.; King, J.C.; Herrera, D.H.; Torres, D.T.; Sena, F.C.; Martinez, E.C.; Reinovsky, R.E.; Stokes, J.L.; Tabaka, L.J.; Kiuttu, G.; Degnan, J.

    1998-10-18

    At Los Alamos, the authors have primarily applied Explosively Formed Fuse (EFF) techniques to high current systems. In these systems, the EFF has interrupted currents from 19 to 25 MA, thus diverting the current to low inductance loads. The magnitude of transferred current is determined by the ratio of storage inductance to load inductance, and with dynamic loads, the current has ranged from 12 to 20 MA. In a system with 18 MJ stored energy, the switch operates at a power up to 6 TW. The authors are now investigating the use of the EFF technique to apply high voltages to high impedance loads in systems that are more compact. In these systems, they are exploring circuits with EFF lengths from 43 to 100 cm, which have storage inductances large enough to apply 300 to 500 kV across high impedance loads. Experimental results and design considerations are presented. Using cylindrical EFF switches of 10 cm diameter and 43 cm length, currents of approximately 3 MA were interrupted producing {approximately}200 kV. This indicate s the switch had an effective resistance of {approximately}100 m{Omega} where 150--200 m{Omega} was expected. To understand the lower performance, several parameters were studied, including: electrical conduction through the explosive products; current density; explosive initiation; insulator type; conductor thickness; and so on. The results show a number of interesting features, most notably that the primary mechanism of switch operation is mechanical and not electrical fusing of the conductor. Switches opening on a 10 to 10 {micro}s time scale with resistances starting at 50 {micro}{Omega} and increasing to perhaps 1 {Omega} now seem possible to construct, using explosive charges as small as a few pounds.

  1. Speciation environments and centres of diversity in southern Africa. I. Conceptual framework

    Directory of Open Access Journals (Sweden)

    E. R. Robinson

    1982-10-01

    Full Text Available A knowledge of the nature and distribution of the environments where speciation (micro-evolution is or has been rapid would help explain plant distributions and give insight into the mechanisms of plant evolution. Before southern African speciation environments can be identified and described, a number of basic theoretical concepts have to be clarified. In this paper the major taxonomic, systematic, floristic, ecological and evolutionary ideas pertinent to speciation environments are reviewed and discussed. Despite many publications about species concepts, species diversity, modes of speciation and the relationship between environments and genetic variability within taxa, it is still not possible to make predictions about the kinds of environments that favour speciation.

  2. Nitroaromatic explosives detection using electrochemically exfoliated graphene

    Science.gov (United States)

    Yew, Ying Teng; Ambrosi, Adriano; Pumera, Martin

    2016-09-01

    Detection of nitroaromatic explosives is of paramount importance from security point of view. Graphene sheets obtained from the electrochemical anodic exfoliation of graphite foil in different electrolytes (LiClO4 and Na2SO4) were compared and tested as electrode material for the electrochemical detection of 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT) in seawater. Voltammetry analysis demonstrated the superior electrochemical performance of graphene produced in LiClO4, resulting in higher sensitivity and linearity for the explosives detection and lower limit of detection (LOD) compared to the graphene obtained in Na2SO4. We attribute this to the presence of oxygen functionalities onto the graphene material obtained in LiClO4 which enable charge electrostatic interactions with the -NO2 groups of the analyte, in addition to π-π stacking interactions with the aromatic moiety. Research findings obtained from this study would assist in the development of portable devices for the on-site detection of nitroaromatic explosives.

  3. Explosive microfractures induced by K-metasomatism

    Science.gov (United States)

    Xu, Xing-Wang; Cai, Xin-Ping; Zhang, Bao-Lin; Wang, Jie

    2004-07-01

    Ultra-fine mineral aggregates in K-metasomatic rocks of the Hougou area, northwestern Hebei Province, China contain peculiar and distinct intergranular and intragranular geometries, compositions, and textures. These features indicate solidification of expanded and enclosed relict fluids within tensile microfractures. Two basic morphologic types of textures are present: saw-toothed and wheel-shaped, and several composite patterns also are present, such as X-shaped, grid, and network. The appearance of these features indicate explosion from an instantaneous force. These microscopic explosive microfractures are directly related to the enclosed relict fluids. Theoretical estimates show that volume expansion induced by mineral replacements during K-metasomatism may have caused the K-metasomatic fluids to be confined and strongly compressed in order to build up powerful forces that produced the ultra-fine mineral aggregates and explosive microfractures. The thick-walled texture of K-metasomatic rocks confined fractures that propagated only in the replaced rocks with the lowest strength. Both pumping pressures and the propagation of the K-metasomatism were self-governed and controlled by introduced chemical elements, specially K +.

  4. Explosive Detection in Aviation Applications Using CT

    Energy Technology Data Exchange (ETDEWEB)

    Martz, H E; Crawford, C R

    2011-02-15

    CT scanners are deployed world-wide to detect explosives in checked and carry-on baggage. Though very similar to single- and dual-energy multi-slice CT scanners used today in medical imaging, some recently developed explosives detection scanners employ multiple sources and detector arrays to eliminate mechanical rotation of a gantry, photon counting detectors for spectral imaging, and limited number of views to reduce cost. For each bag scanned, the resulting reconstructed images are first processed by automated threat recognition algorithms to screen for explosives and other threats. Human operators review the images only when these automated algorithms report the presence of possible threats. The US Department of Homeland Security (DHS) has requirements for future scanners that include dealing with a larger number of threats, higher probability of detection, lower false alarm rates and lower operating costs. One tactic that DHS is pursuing to achieve these requirements is to augment the capabilities of the established security vendors with third-party algorithm developers. A third-party in this context refers to academics and companies other than the established vendors. DHS is particularly interested in exploring the model that has been used very successfully by the medical imaging industry, in which university researchers develop algorithms that are eventually deployed in commercial medical imaging equipment. The purpose of this paper is to discuss opportunities for third-parties to develop advanced reconstruction and threat detection algorithms.

  5. Development of steam explosion simulation code JASMINE

    Energy Technology Data Exchange (ETDEWEB)

    Moriyama, Kiyofumi; Yamano, Norihiro; Maruyama, Yu; Kudo, Tamotsu; Sugimoto, Jun [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Nagano, Katsuhiro; Araki, Kazuhiro

    1995-11-01

    A steam explosion is considered as a phenomenon which possibly threatens the integrity of the containment vessel of a nuclear power plant in a severe accident condition. A numerical calculation code JASMINE (JAeri Simulator for Multiphase INteraction and Explosion) purposed to simulate the whole process of steam explosions has been developed. The premixing model is based on a multiphase flow simulation code MISTRAL by Fuji Research Institute Co. In JASMINE code, the constitutive equations and the flow regime map are modified for the simulation of premixing related phenomena. The numerical solution method of the original code is succeeded, i.e. the basic equations are discretized semi-implicitly, BCGSTAB method is used for the matrix solver to improve the stability and convergence, also TVD scheme is applied to capture a steep phase distribution accurately. Test calculations have been performed for the conditions correspond to the experiments by Gilbertson et al. and Angelini et al. in which mixing of solid particles and water were observed in iso-thermal condition and with boiling, respectively. (author).

  6. Divergence with gene flow across a speciation continuum of Heliconius butterflies.

    Science.gov (United States)

    Supple, Megan A; Papa, Riccardo; Hines, Heather M; McMillan, W Owen; Counterman, Brian A

    2015-09-24

    A key to understanding the origins of species is determining the evolutionary processes that drive the patterns of genomic divergence during speciation. New genomic technologies enable the study of high-resolution genomic patterns of divergence across natural speciation continua, where taxa pairs with different levels of reproductive isolation can be used as proxies for different stages of speciation. Empirical studies of these speciation continua can provide valuable insights into how genomes diverge during speciation. We examine variation across a handful of genomic regions in parapatric and allopatric populations of Heliconius butterflies with varying levels of reproductive isolation. Genome sequences were mapped to 2.2-Mb of the H. erato genome, including 1-Mb across the red color pattern locus and multiple regions unlinked to color pattern variation. Phylogenetic analyses reveal a speciation continuum of pairs of hybridizing races and incipient species in the Heliconius erato clade. Comparisons of hybridizing pairs of divergently colored races and incipient species reveal that genomic divergence increases with ecological and reproductive isolation, not only across the locus responsible for adaptive variation in red wing coloration, but also at genomic regions unlinked to color pattern. We observe high levels of divergence between the incipient species H. erato and H. himera, suggesting that divergence may accumulate early in the speciation process. Comparisons of genomic divergence between the incipient species and allopatric races suggest that limited gene flow cannot account for the observed high levels of divergence between the incipient species. Our results provide a reconstruction of the speciation continuum across the H. erato clade and provide insights into the processes that drive genomic divergence during speciation, establishing the H. erato clade as a powerful framework for the study of speciation.

  7. Allopatric Speciation within a Cryptic Species Complex of Australasian Octopuses

    Science.gov (United States)

    Amor, Michael D.; Norman, Mark D.; Cameron, Hayley E.; Strugnell, Jan M.

    2014-01-01

    Despite extensive revisions over recent decades, the taxonomy of benthic octopuses (Family Octopodidae) remains in a considerable flux. Among groups of unresolved status is a species complex of morphologically similar shallow-water octopods from subtropical Australasia, including: Allopatric populations of Octopus tetricus on the eastern and western coasts of Australia, of which the Western Australian form is speculated to be a distinct or sub-species; and Octopus gibbsi from New Zealand, a proposed synonym of Australian forms. This study employed a combination of molecular and morphological techniques to resolve the taxonomic status of the ‘tetricus complex’. Phylogenetic analyses (based on five mitochondrial genes: 12S rRNA, 16S rRNA, COI, COIII and Cytb) and Generalised Mixed Yule Coalescent (GMYC) analysis (based on COI, COIII and Cytb) distinguished eastern and Western Australian O. tetricus as distinct species, while O. gibbsi was found to be synonymous with the east Australian form (BS = >97, PP = 1; GMYC p = 0.01). Discrete morphological differences in mature male octopuses (based on sixteen morphological traits) provided further evidence of cryptic speciation between east (including New Zealand) and west coast populations; although females proved less useful in morphological distinction among members of the tetricus complex. In addition, phylogenetic analyses suggested populations of octopuses currently treated under the name Octopus vulgaris are paraphyletic; providing evidence of cryptic speciation among global populations of O. vulgaris, the most commercially valuable octopus species worldwide. PMID:24964133

  8. Triassic-Jurassic pteridosperms of Australasia: speciation, diversity and decline

    Energy Technology Data Exchange (ETDEWEB)

    Pattemore, G. A.; Rigby, J. F.; Playford, G.

    2015-07-01

    Pteridosperms are preserved abundantly in the Gondwanan Triassic, with many species exhibiting consider- able morphological variation that has been attributed to a hybridization model of speciation. This is an improbable explanation given that hybridization is very rare in gymnosperms. Allopatric speciation resulting from geographic and climatic provincialism is a more likely explanation for the morphological diversity which is well represented in Anisian Norian (Middle and Upper Triassic) floras of Australasia and elsewhere in Gondwana. Most specimens are distributed among three families: Umkomasiaceae, Peltaspermaceae and Matatiellaceae. These families, together with other possibly pteridospermous genera, are reviewed herein. Diversity in these families apparently declined by the Rhaetian and they did not persist into the Gondwanan post-Triassic. Australasian post-Triassic strata contain remarkably different floral assemblages to those of the Triassic. No fructifications are clearly pteridospermous and no remains show any obvious relationship with pteridosperms of the Gondwanan Triassic. Caytonialean fructifications are not known in Australasian strata; however, associated foliage has been reported from the Eastern Gondwanan Upper Triassic through Middle Jurassic including Australia. Much fern-like foliage, claimed to be pteridospermous from the Lower Jurassic through Eocene of Eastern Gondwana, lacks supporting evidence of such affiliation. (Author)

  9. Speciation and bioavailability of zinc in amended sediments

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Aaron G.B.; Scheckel, Kirk G.; McDermott, Gregory; Gratson, David; Neptune, Dean; Ryan, James A.

    2011-12-09

    The speciation and bioavailability of zinc (Zn) in smelter-contaminated sediments were investigated as a function of phosphate (apatite) and organic amendment loading rate. Zinc species identified in preamendment sediment were zinc hydroxide-like phases, sphalerite, and zinc sorbed to an iron oxide via X-ray adsorption near edge structure (XANES) spectroscopy. Four months after adding the amendments to the contaminated sediment, hopeite, a Zn phosphate mineral, was identified indicating phosphate was binding and sequestering available Zn and Zn pore water concentrations were decreased at levels of 90% or more. Laboratory experiments indicate organic amendments exhibit a limited effect and may hinder sequestration of pore water Zn when mixed with apatite. The acute toxicity of the sediment Zn was evaluated with Hyalella azteca, and bioaccumulation of Zn with Lumbriculus variegates. The survivability of H. azteca increased as a function of phosphate (apatite) loading rate. In contaminated sediment without apatite, no specimens of H. azteca survived. The bioaccumulation of Zn in L. variegates also followed a trend of decreased bioaccumulation with increased phosphate loading in the contaminated sediment. The research supports an association between Zn speciation and bioavailability.

  10. Technetium Inventory, Distribution, and Speciation in Hanford Tanks

    Energy Technology Data Exchange (ETDEWEB)

    Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rapko, Brian M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pegg, Ian L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-11-13

    The purpose of this report is three fold: 1) assemble the available information regarding Tc inventory, distribution between phases, and speciation in Hanford’s 177 storage tanks into a single, detailed, comprehensive assessment; 2) discuss the fate (distribution/speciation) of Tc once retrieved from the storage tanks and processed into final waste forms; and 3) discuss/document in less detail the available data on the inventory of Tc in other “pools” such as the vadose zone below inactive cribs and trenches, below single-shell tanks (SSTs) that have leaked, and in the groundwater below the Hanford Site. This report was revised in September 2014 to add detail and correct inaccuracies in Section 5.0 on the fate of technetium (Tc) recycle from the off-gas systems downstream of the low-activity waste (LAW) melters back to the melters, based on several reports that were not found in the original literature search on the topic. The newly provided reports, from experts active in the Hanford Tank Waste Treatment and Immobilization Plant (WTP) glass studies, the Vitreous State Laboratory at The Catholic University of America (VSL) melter and off-gas system demonstrations and overall WTP systems analysis, were not originally found on electronic databases commonly searched. The major revisions to Section 5.0 also required changes to Section 7.0 (Summary and Conclusions) and this executive summary.

  11. Evaluation of mercury speciation by EPA (Draft) Method 29

    Energy Technology Data Exchange (ETDEWEB)

    Laudal, D.L.; Heidt, M.K. [Energy & Environmental Research Center, Grand Forks, ND (United States); Nott, B. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-11-01

    The 1990 Clean Air Act Amendments require that the U.S. Environmental protection Agency (EPA) assess the health risks associated with mercury emissions. Also, the law requires a separate assessment of health risks posed by the emission of 189 tract chemicals (including mercury) for electric utility steam-generating units. In order to conduct a meaningful assessment of health and environmental effects, we must have, among other things, a reliable and accurate method to measure mercury emissions. In addition, the rate of mercury deposition and the type of control strategies used may depend upon the type of mercury emitted (i.e., whether it is in the oxidized or elemental form). It has been speculated that EPA (Draft) Method 29 can speciate mercury by selective absorption; however, this claim has yet to be proven. The Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) have contracted with the Energy & Environmental Research Center (EERC) at University of North Dakota to evaluate EPA (Draft) Method 29 at the pilot-scale level. The objective of the work is to determine whether EPA (Draft) Method 29 can reliably quantify and speciate mercury in the flue gas from coal-fired boilers.

  12. Parallel speciation in Astyanax cave fish (Teleostei) in Northern Mexico.

    Science.gov (United States)

    Strecker, Ulrike; Hausdorf, Bernhard; Wilkens, Horst

    2012-01-01

    We investigated differentiation processes in the Neotropical fish Astyanax that represents a model system for examining adaptation to caves, including regressive evolution. In particular, we analyzed microsatellite and mitochondrial data of seven cave and seven surface populations from Mexico to test whether the evolution of the cave fish represents a case of parallel evolution. Our data revealed that Astyanax invaded northern Mexico across the Trans-Mexican Volcanic Belt at least three times and that populations of all three invasions adapted to subterranean habitats. Significant differentiation was found between the cave and surface populations. We did not observe gene flow between the strongly eye and pigment reduced old cave populations (Sabinos, Tinaja, Pachon) and the surface fish, even when syntopically occurring like in Yerbaniz cave. Little gene flow, if any, was found between cave populations, which are variable in eye and pigmentation (Micos, Chica, Caballo Moro caves), and surface fish. This suggests that the variability is due to their more recent origin rather than to hybridization. Finally, admixture of the young Chica cave fish population with nuclear markers from older cave fish demonstrates that gene flow between populations that independently colonized caves occurs. Thus, all criteria of parallel speciation are fulfilled. Moreover, the microsatellite data provide evidence that two co-occurring groups with small sunken eyes and externally visible eyes, respectively, differentiated within the partly lightened Caballo Moro karst window cave and might represent an example for incipient sympatric speciation. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. AN ANALYTICAL METHOD FOR CHEMICAL SPECIATION OF SELENIUM IN SOIL

    Directory of Open Access Journals (Sweden)

    Constantin Luca

    2010-10-01

    Full Text Available Selenium is an essential microelement, sometimes redoubtable, through its beneficial role - risk depending on its concentration in the food chain, at low dose is an important nutrient in the life of humans and animals, contrary at high doses, it becomes toxic. Selenium may be find itself in the environment (soil, sediment, water in many forms (oxidized, reduced, organometallic which determine their mobility and toxicity. Determination of chemical speciation (identification of different chemical forms provides much more complete information for a better understanding of the behavior and the potential impact on the environment. In this work we present the results of methodological research on the extraction of sequential forms of selenium in the soil and the coupling of analytical methods capable of identifying very small amounts of selenium in soils An efficient scheme of sequential extractions forms of selenium (SES consisting in atomic absorption spectrometry coupled with hydride generation (HGAAS has been developed into five experimental steps, detailed in the paper. This operational scheme has been applied to the analysis of chemical speciation in the following areas: the Bărăgan Plain and Central Dobrogea of Romania.

  14. Pedigrees, assortative mating and speciation in Darwin's finches

    Science.gov (United States)

    Grant, Peter R; Grant, B. Rosemary

    2008-01-01

    Pedigree analysis is a useful tool in the study of speciation. It can reveal trans-generational influences on the choice of mates. We examined mating patterns in a population of Darwin's medium ground finches (Geospiza fortis) on Daphne Major Island to improve our understanding of how a barrier to the exchange of genes between populations arises in evolution. Body sizes of mates were weakly correlated. In one year, the smallest females were paired non-randomly with the males of similar size, and in another year the largest males were paired with the largest females. An influence of parental morphology on the choice of mates, as expected from sexual imprinting theory, was found; the body size of mates was predicted by the body sizes of both parents, and especially strongly by the father's. These associations imply that the seeds of reproductive isolation between species are present within a single variable population. The implication was subject to a natural test: two exceptionally large birds of the study species, apparently immigrants, bred with each other, as did their offspring, and not with the members of the resident population. The intense inbreeding represents incipient speciation. It parallels a similar phenomenon when another species, the large ground finch, immigrated to Daphne and established a new population without interbreeding with the resident medium ground finches. PMID:18211884

  15. Salinity Effects on Iron Speciation in Boreal River Waters.

    Science.gov (United States)

    Herzog, Simon D; Persson, Per; Kritzberg, Emma S

    2017-09-05

    Previous studies report high and increasing iron (Fe) concentrations in boreal river mouths. This Fe has shown relatively high stability to salinity-induced aggregation in estuaries. The aim of this study was to understand how the speciation of Fe affects stability over salinity gradients. For Fe to remain in suspension interactions with organic matter (OM) are fundamental and these interactions can be divided in two dominant phases: organically complexed Fe, and colloidal Fe (oxy)hydroxides, stabilized by surface interactions with OM. The stability of these two Fe phases was tested using mixing experiments with river water and artificial seawater. Fe speciation of river waters and salinity-induced aggregates was determined by synchrotron-based extended X-ray absorption fine structure (EXAFS) spectroscopy. The relative contribution of the two Fe phases varied widely across the sampled rivers. Moreover, we found selective removal of Fe (oxy)hydroxides by aggregation at increasing salinity, while organically complexed Fe was less affected. However, Fe-OM complexes were also found in the aggregates, illustrating that the control of Fe stability is not explained by the prevalence of the respective Fe phases alone. Factors such as colloid size and the chemical composition of the OM may also impact the behavior of Fe species.

  16. Selenium speciation from food source to metabolites: a critical review

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, Emmie; Vanhaecke, Frank; Cornelis, Rita [Ghent University, Department of Analytical Chemistry, Ghent (Belgium)

    2006-08-15

    Especially in the last decade, a vast number of papers on Se and its role in health issues have been published. This review gives a brief, critical overview of the main analytical findings reported in these papers. Of particular interest is the Se content in different food sources worldwide and the extent to which their consumption is reflected in the Se content of human tissues and body fluids. Several food sources, both natural (Brazil nuts, garlic, Brassica juncea) and Se-enriched (yeast-based supplements), are discussed as to origin, characteristics, Se metabolism and impact of their consumption on the human body. The continuous development of new and improvement of existing analytical techniques has provided different powerful tools to unravel the Se species and their function. An up-to-date literature study on Se speciation analysis is given, illustrating how analytical chemistry in its different facets aids in the identification of Se compounds and provides insight into the complete metabolic pathway of Se throughout the human body. This review includes a detailed image of the current state-of-the-art of Se speciation analysis in these food sources and in human tissues and body fluids. (orig.)

  17. Characteristics of regional seismic waves from large explosive events including Korean nuclear explosions

    Science.gov (United States)

    Jo, Eunyoung; Lee, Ha-sung

    2015-04-01

    Three North Korean underground nuclear explosion (UNE) tests were conducted in 2006, 2009 and 2013. Discrimination of explosions from natural earthquakes is important in monitoring the seismic activity in the Korean Peninsula. The UNEs were well recorded by dense regional seismic networks in South Korea. The UNEs provide unique regional seismic waveforms with high signal-to-noise ratios. However, the continental crust in the Korean Peninsula changes abruptly into a transitional structure between continental and oceanic crusts across the eastern coast. The complex geological and tectonic structures around the Korean Peninsula cause significant variations in regional waveforms. Outstanding question is whether conventional discrimination techniques can be applicable for explosions including the North Korean UNEs. P/S amplitude ratios are widely used for seismic discrimination. To understand the regional shear-energy composition, we analyze the frequency contents of waveforms. The shear-energy contents for the UNEs are compared with those for natural earthquakes with comparable magnitudes. The result shows that the UNEs are successfully discriminated from earthquakes in the Korean Peninsula. We also analyze the explosive events from North Korean not UNEs to test the applicability of the discrimination technique. The result of high frequency Pn/Sn regional discrimination in the explosions show that as magnitude of event is smaller, available distance of discrimination is decreased particularly in high frequency range. The poor signal to noise ratio of Pn phase in the explosions, and inefficient propagation of Sn phase in the Western part of the peninsula frustrate Pn/Sn discriminant, while the UNEs show good performance using both discriminants because of propagation path effects in the eastern part of the peninsula.

  18. Supersensitive fingerprinting of explosives by chemically modified nanosensors arrays

    Science.gov (United States)

    Lichtenstein, Amir; Havivi, Ehud; Shacham, Ronen; Hahamy, Ehud; Leibovich, Ronit; Pevzner, Alexander; Krivitsky, Vadim; Davivi, Guy; Presman, Igor; Elnathan, Roey; Engel, Yoni; Flaxer, Eli; Patolsky, Fernando

    2014-06-01

    The capability to detect traces of explosives sensitively, selectively and rapidly could be of great benefit for applications relating to civilian national security and military needs. Here, we show that, when chemically modified in a multiplexed mode, nanoelectrical devices arrays enable the supersensitive discriminative detection of explosive species. The fingerprinting of explosives is achieved by pattern recognizing the inherent kinetics, and thermodynamics, of interaction between the chemically modified nanosensors array and the molecular analytes under test. This platform allows for the rapid detection of explosives, from air collected samples, down to the parts-per-quadrillion concentration range, and represents the first nanotechnology-inspired demonstration on the selective supersensitive detection of explosives, including the nitro- and peroxide-derivatives, on a single electronic platform. Furthermore, the ultrahigh sensitivity displayed by our platform may allow the remote detection of various explosives, a task unachieved by existing detection technologies.

  19. Analysis of the external explosion action on the building barriers

    Directory of Open Access Journals (Sweden)

    Jarosław Siwiński

    2015-06-01

    Full Text Available The paper presents a method for determination of the action of an external explosion on building barriers. We used different procedures, known in the literature, for analysis of action of an external explosion. These procedures were the basis of tabulated algorithm for determination of the characteristics of the explosion action on the building barriers. We considered the basic division of phases of explosion action onto overpressure phase and underpressure phase. We determined blast wave parameters considering the division of explosion zone onto the close zone and distant zone. For each zone, we presented the methods of determination of the initial pressure of the reflected wave, time durations of overpressure phase, and the load variation in time.[b]Keywords[/b]: civil engineering, structural mechanics, explosive actions, building structures

  20. Characterization of explosives processing waste decomposition due to composting

    Energy Technology Data Exchange (ETDEWEB)

    Griest, W.H.; Tyndall, R.L.; Stewart, A.J.; Ho, C.H.; Ironside, K.S.; Caton, J.E.; Caldwell, W.M.; Tan, E.

    1991-11-01

    Static pile and mechanically stirred composts generated at the Umatilla Army Depot Activity in a field composting optimization study were chemically and toxicologically characterized to provide data for the evaluation of composting efficiency to decontaminate and detoxify explosives-contaminated soil. Characterization included determination of explosives and 2,4,6,-trinitrotoluene metabolites in composts and their EPA Synthetic Precipitation Leaching Procedure Leachates, leachate toxicity to Ceriodaphnia Dubia and mutagenicity of the leachates and organic solvent extracts of the composts to Ames bacterial strains TA-98 and TA-100. The main conclusion from this study is that composting can effectively reduce the concentrations of explosives and bacterial mutagenicity in explosives -- contaminated soil, and can reduce the aquatic toxicity of leachable compounds. Small levels of explosive and metabolites, bacterial mutagenicity, and leachable aquatic toxicity remain after composting. The ultimate fate of the biotransformed explosives, and the source(s) of residual toxicity and mutagenicity remain unknown.

  1. Blast overpressure after tire explosion: a fatal case.

    Science.gov (United States)

    Pomara, Cristoforo; D'Errico, Stefano; Riezzo, Irene; Perilli, Gabriela; Volpe, Umberto; Fineschi, Vittorio

    2013-12-01

    Fatal blast injuries are generally reported in literature as a consequence of the detonation of explosives in war settings. The pattern of lesion depends on the position of the victim in relation to the explosion, on whether the blast tracks through air or water, and whether it happens in the open air or within an enclosed space and the distance from the explosion. Tire explosion-related injuries are rarely reported in literature. This study presents a fatal case of blast overpressure due to the accidental explosion of a truck tire occurring in a tire repair shop. A multidisciplinary approach to the fatality involving forensic pathologists and engineers revealed that the accidental explosion, which caused a series of primary and tertiary blast wave injuries, was due to tire deterioration.

  2. Stability and the competition-dispersal trade-off as drivers of speciation and biodiversity gradients

    Directory of Open Access Journals (Sweden)

    Loïc ePellissier

    2015-06-01

    Full Text Available The geography of speciation is one of the most contentious topics at the frontier between ecology and evolution. Here, building on previous hypotheses, I propose that ecological constraints on species co-existence mediate the likelihood of speciation, via a trade-off between competitive and dispersal abilities. Habitat stability, as found in the tropics, selects for the evolution of stronger competitive abilities. Since resource investment in competitive and dispersal abilities should trade off, high competition in stable habitats reduces species dispersal ability, decreasing effective population sizes. In smaller local populations, higher fixation rates of molecular substitutions increases the likelihood of speciation. Higher species diversity triggers more speciation by further increasing the spatial structuring of populations and decreasing effective population sizes. Higher resource specialization also trades-off with dispersal ability and could account for speciation at higher trophic levels. Biotic interactions would therefore promote parapatric speciation and generate spatial patterns in diversity such as the latitudinal diversity gradient. I discuss the main evidence for this mechanism and emphasize the need for studies coupling ecology and speciation theory within landscapes.

  3. Motivation for a High Explosive Testing Program in South Africa

    Science.gov (United States)

    2015-12-04

    1~7JJ!i 5a. DATE: 6a. DATE: 7a. DATE: 8. TITLE: Motivation for a High Explosive Testing Program in South Africa 9. CONTRACT NUMBER: 10...00-00-2015 4. TITLE AND SUBTITLE Motivation for a High Explosive Testing Program in South Africa 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...600 Raleigh, NC 27605 Contract Number: HDTRA2-11-D-0001 Motivation for a High Explosive Testing Program in South Africa 4

  4. Mesoscale modeling of metal-loaded high explosives

    Energy Technology Data Exchange (ETDEWEB)

    Bdzil, John Bohdan [Los Alamos National Laboratory; Lieberthal, Brandon [UNIV OF ILLINOIS; Srewart, Donald S [UNIV OF ILLINOIS

    2010-01-01

    We describe a 3D approach to modeling multi-phase blast explosive, which is primarily condensed explosive by volume with inert embedded particles. These embedded particles are uniform in size and placed on the array of a regular lattice. The asymptotic theory of detonation shock dynamics governs the detonation shock propagation in the explosive. Mesoscale hydrodynamic simulations are used to show how the particles are compressed, deformed, and accelerated by the high-speed detonation products flow.

  5. Speciation and bioavailability of lead in complementary medicines

    Energy Technology Data Exchange (ETDEWEB)

    Bolan, S., E-mail: Shiv.Bolan@UON.edu.au [School of Natural and Built Environments, University of South Australia, SA 5095 (Australia); Global Centre for Environmental Remediation (GCER), University of Newcastle, NSW 2308 (Australia); Naidu, R. [Global Centre for Environmental Remediation (GCER), University of Newcastle, NSW 2308 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment (CRC CARE), University of South Australia, SA 5095 (Australia); Kunhikrishnan, A. [Chemical Safety Division, Department of Agro–Food Safety, National Academy of Agricultural Science, Wanju-gun, Jeollabuk-do, 565-851 (Korea, Republic of); Seshadri, B. [Global Centre for Environmental Remediation (GCER), University of Newcastle, NSW 2308 (Australia); Ok, Y.S. [Korea Biochar Research Center & Department of Biological Environment, Kangwon National University, Chuncheon 200-701 (Korea, Republic of); Palanisami, T.; Dong, M. [Global Centre for Environmental Remediation (GCER), University of Newcastle, NSW 2308 (Australia); Clark, I. [School of Natural and Built Environments, University of South Australia, SA 5095 (Australia)

    2016-01-01

    Complementary medicines have associated risks which include toxic heavy metal(loid) and pesticide contamination. The objective of this study was to examine the speciation and bioavailability of lead (Pb) in selected complementary medicines. Six herbal and six ayurvedic medicines were analysed for: (i) total heavy metal(loid) contents including arsenic (As), cadmium (Cd), Pb and mercury (Hg); (ii) speciation of Pb using sequential fractionation and extended x-ray absorption fine structure (EXAFS) techniques; and (iii) bioavailability of Pb using a physiologically-based in vitro extraction test (PBET). The daily intake of Pb through the uptake of these medicines was compared with the safety guidelines for Pb. The results indicated that generally ayurvedic medicines contained higher levels of heavy metal(loid)s than herbal medicines with the amount of Pb much higher than the other metal(loid)s. Sequential fractionation indicated that while organic-bound Pb species dominated the herbal medicines, inorganic-bound Pb species dominated the ayurvedic medicines. EXAFS data indicated the presence of various Pb species in ayurvedic medicines. This implies that Pb is derived from plant uptake and inorganic mineral input in herbal and ayurvedic medicines, respectively. Bioavailability of Pb was higher in ayurvedic than herbal medicines, indicating that Pb added as a mineral therapeutic input is more bioavailable than that derived from plant uptake. There was a positive relationship between soluble Pb fraction and bioavailability indicating that solubility is an important factor controlling bioavailability. The daily intake values for Pb as estimated by total and bioavailable metal(loid) contents are likely to exceed the safe threshold level in certain ayurvedic medicines. This research demonstrated that Pb toxicity is likely to result from the regular intake of these medicines which requires further investigation. - Highlights: • Pb species in complementary medicines was

  6. Airborne Vertical Profiling of Mercury Speciation near Tullahoma, TN, USA

    Directory of Open Access Journals (Sweden)

    Steve Brooks

    2014-08-01

    Full Text Available Atmospheric transport and in situ oxidation are important factors influencing mercury concentrations at the surface and wet and dry deposition rates. Contributions of both natural and anthropogenic processes can significantly impact burdens of mercury on local, regional and global scales. To address these key issues in atmospheric mercury research, airborne measurements of mercury speciation and ancillary parameters were conducted over a region near Tullahoma, Tennessee, USA, from August 2012 to June 2013. Here, for the first time, we present vertical profiles of Hg speciation from aircraft for an annual cycle over the same location. These airborne measurements included gaseous elemental mercury (GEM, gaseous oxidized mercury (GOM and particulate bound mercury (PBM, as well as ozone (O3, sulfur dioxide (SO2, condensation nuclei (CN and meteorological parameters. The flights, each lasting ~3 h, were conducted typically one week out of each month to characterize seasonality in mercury concentrations. Data obtained from 0 to 6 km altitudes show that GEM exhibited a relatively constant vertical profile for all seasons with an average concentration of 1.38 ± 0.17 ng∙m−3. A pronounced seasonality of GOM was observed, with the highest GOM concentrations up to 120 pg∙m−3 in the summer flights and lowest (0–20 pg∙m−3 in the winter flights. Vertical profiles of GOM show the maximum levels at altitudes between 2 and 4 km. Limited PBM measurements exhibit similar levels to GOM at all altitudes. HYSPLIT back trajectories showed that the trajectories for elevated GOM (>70 pg∙m−3 or PBM concentrations (>30 pg∙m−3 were largely associated with air masses coming from west/northwest, while events with low GOM (<20 pg∙m−3 or PBM concentrations (<5 pg∙m−3 were generally associated with winds from a wider range of wind directions. This is the first set of speciated mercury vertical profiles collected in a single location over the course

  7. Sample treatment in chromatography-based speciation of organometallic pollutants.

    Science.gov (United States)

    Gómez-Riza, J L; Morales, E; Giráldez, I; Sánchez-Rodas, D; Velasco, A

    2001-12-14

    Speciation analysis is nowadays performed routinely in many laboratories to control the quality of the environment, food and health. Chemical speciation analyses generally include the study of different oxidation state of elements or individual organometallic compounds. The determination of the different chemical forms of elements is still an analytical challenge, since they are often unstable and concentrations in different matrices of interest are in the microg l(-1) or even in the ng l(-1) range (e.g., estuarine waters) or ng g(-1) in sediments and biological tissues. For this reason, sensitive and selective analytical atomic techniques are being used as available detectors for speciation, generally coupled with chromatography for the time-resolved introduction of analytes into the atomic spectrometer. The complexity of these instrumental couplings has a straightforward consequence on the duration of the analysis, but sample preparation to separate and transfer the chemical species present in the sample into a solution to be accepted readily by a chromatographic column is the more critical step of total analysis, and demands considerable operator skills and time cost. Traditionally, liquid-liquid extraction has been employed for sample treatment with serious disadvantages, such as consumption, disposal and long-term exposure to organic solvent. In addition, they are usually cumbersome and time-consuming. Therefore, the introduction of new reagents such as sodium tetraethylborate for the simultaneous derivatization of several elements has been proposed. Other possibilities are based in the implementation of techniques for efficient and accelerated isolation of species from the sample matrix. This is the case for microwave-assisted extraction, solid-phase extraction and microextraction, supercritical fluid extraction or pressurized liquid extraction, which offer new possibilities in species treatment, and the advantages of a drastic reduction of the extraction

  8. Selenium speciation influences bioaccumulation in Limnodynastes peronii tadpoles

    Energy Technology Data Exchange (ETDEWEB)

    Lanctôt, C.M., E-mail: c.lanctot@griffith.edu.au [Central Queensland University, School of Medical and Applied Sciences, Gladstone, QLD 4680 (Australia); Australian Rivers Institute, School of Environment, Griffith University, Southport, QLD 4215 (Australia); Melvin, S.D., E-mail: s.melvin@griffith.edu.au [Australian Rivers Institute, School of Environment, Griffith University, Southport, QLD 4215 (Australia); Cresswell, T., E-mail: tom.cresswell@ansto.gov.au [Australian Nuclear Science and Technology Organisation (ANSTO), Locked Bag 2001, Kirrawee DC, NSW 2232 (Australia)

    2017-06-15

    Highlights: • Differences in SeIV and SeVI bioaccumulation and biodistribution were assessed. • Limnodynastes peronii tadpoles accumulated more selenite than selenate. • Selenium depuration kinetics was similar for both forms. • Tadpoles accumulated Se predominantly in the digestive and excretory organs. - Abstract: Despite being essential for animal health and fitness, Se has a relatively narrow range between deficiency and toxicity, and excess Se can cause a variety of adverse effects in aquatic organisms. Amphibians are particularly vulnerable to contaminants during larval aquatic life stage, because they can accumulate toxic ions through various routes including skin, gills, lungs and digestive tract. Few attempts have been made to understand the tissue-specific accumulation of trace elements, including the impacts of chemical speciation in developing amphibian larvae. We used radiolabelled {sup 75}Se to explore the biokinetics and tissue distributions of the two dominant forms occurring in surface waters, selenite (SeIV) and selenate (SeVI). Tadpoles of the native Australian frog Limnodynastes peronii were exposed to Se in both forms, and live-animal gamma spectroscopy was used to track accumulation and retention over time. Tissue biodistributions were also quantified at the end of the uptake and depuration phases. Results showed the bioconcentration of SeIV to be 3 times greater compared to SeVI, but rates of elimination were similar for both forms. This suggests a change of Se speciation within the organism prior to excretion. Depuration kinetics were best described by a one-phase exponential decay model, and tadpoles retained approximately 19% of the accumulated Se after 12 days of depuration in clean water. Selenium bioaccumulation was greatest in digestive and excretory organs, as well as the eye, which may directly relate to previously reported Se-induced impairments. Results demonstrate how the use of radiotracing techniques can significantly

  9. Air Blasts from Cased and Uncased Explosives

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, L. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-04-12

    The problem of a spherical blast in air is solved using the STUN code. For bare charges, the calculations are shown to be in excellent agreement with previous published results. It is demonstrated that, for an unconfined (uncased) chemical explosive, both range and time to effect scale inversely as the cube root of the yield and directly as the cube root of the ambient air density. It is shown that the peak overpressure decays to roughly 1/10 of ambient pressure in a scaled range of roughly 10 m/kg1/3 at sea level. At a height of 30 km, where the ambient density is a factor of 64 less, the range to the same decay increases to 40 m/kg1/3 . As a direct result of the scaling a single calculation suffices for all charge sizes and altitudes. Although the close-in results are sensitive to the nature of the explosive source and the equation of state of the air, this sensitivity is shown to virtually disappear at scaled ranges > 0.5 m/kg1/3 . For cased explosives the case thickness introduces an additional scale factor. Moreover, when the blast wave arrives at the inner case radius the case begins to expand. Fracture occurs when a critical value of the resulting hoop strain is reached, causing the case to shatter into fragments. A model is proposed to describe the size distribution of the fragments and their subsequent motion via drag interaction with the explosion products and ambient air. It is shown that a significant fraction of the charge energy is initially transmitted to the case fragments in the form of kinetic energy; for example, a 1 kg spherical charge with a 5 mm thick steel case has almost 29% of the total charge energy as initial kinetic energy of case fragments. This percentage increases with increasing case thickness and decreases with increasing charge size. The peak overpressure at a given range is 70-85% for cased explosives as compared with uncased and the peak impulse per unit area is 90-95%. The peak overpressure and

  10. Trace element analytical speciation in biological systems: importance, challenges and trends

    Science.gov (United States)

    Sanz-Medel, Alfredo

    1998-02-01

    Speciation of trace elements is a relatively new field and it was in toxicology that the relationship between the chemical form of a metal and its harmful effects was first recognized. The present need for chemical speciation information in biochemistry bioinorganic and clinical chemistry is documented in an attempt to justify the present demand for innovative chemical speciation strategies and analytical technologies. The challenge and complexity of speciation is stressed and three different categories of analytical speciation of increasing analytical difficulty are proposed. Analytical strategies developed so far to try to tackle speciation problems (computational approaches, direct species-specific and hybrid techniques) are reviewed and critically assessed for biological materials. It is indisputable these days that in most cases of real-life analytical speciation we have to resort to the development and use of hybrid techniques combining an adequate separation technique for the species physical separation and an element specific detector such as those based in atomic spectrometry. Examples of such strategies, as developed mainly in the author's laboratory and including chromatographic and non-chromatographic type hybrid strategies coupled to flame, plasma and electrothermal vaporization atomic detectors, are discussed in more detail. Finally, in light of the latest trends observed in this new field, the author attempts to cast a forward look into the foreseeable future of analytical speciation research in biological and biomedical sciences. The urgent plea for quality assurance in non-routine analysis and the concept of using complementary analytical techniques and definitive methods to attack the complexity of chemical speciation in biological systems are particularly highlighted.

  11. AND EXPLOSIVE STRENGTH OF YOUNG GYMNASTS

    Directory of Open Access Journals (Sweden)

    G. Dallas

    2014-08-01

    Full Text Available The purpose of this study was to examine the acute effect of a single bout of whole body vibration (WBV on flexibility and explosive strength of lower limbs in young artistic gymnasts. Thirty-two young competitive gymnasts volunteered to participate in this study, and were allocated to either the vibration group or traditional body weight training according to the vibration protocol. The vibration intervention consisted of a single bout of eccentric and concentric squatting movements on a vibration platform that was turned on (vibration group: VG n=15, whereas the traditional body weight (no vibration group performed the same training protocol with the WBV device turned off (NVG: n= 17. Flexibility (sit and reach test and explosive strength tests [squat jump (SJ, counter movement jump (CMJ, and single leg squat (right leg (RL and left leg (LL] were performed initially (pre-test, immediately after the intervention (post-test 1, and 15 minutes after the end of the intervention programme (post-test 15. Four 2x3 ANOVAs were used to examine the interaction between group (VG vs NVG and time (pre, post 1, and post 15 with respect to examined variables. The results revealed that a significant interaction between group and time was found with respect to SJ (p 0.05. Further, the percentage improvement of the VG was significantly greater in all examined variables compared to the NVG. This study concluded that WBV training improves flexibility and explosive strength of lower limbs in young trained artistic gymnasts and maintains the initial level of performance for at least 15 minutes after the WBV intervention programme.

  12. Surface effects of underground nuclear explosions

    Energy Technology Data Exchange (ETDEWEB)

    Allen, B.M.; Drellack, S.L. Jr.; Townsend, M.J.

    1997-06-01

    The effects of nuclear explosions have been observed and studied since the first nuclear test (code named Trinity) on July 16, 1945. Since that first detonation, 1,053 nuclear tests have been conducted by the US, most of which were sited underground at the Nevada Test Site (NTS). The effects of underground nuclear explosions (UNEs) on their surroundings have long been the object of much interest and study, especially for containment, engineering, and treaty verification purposes. One aspect of these explosion-induced phenomena is the disruption or alteration of the near-surface environment, also known as surface effects. This report was prepared at the request of the Los Alamos National Laboratory (LANL), to bring together, correlate, and preserve information and techniques used in the recognition and documentation of surface effects of UNEs. This report has several main sections, including pertinent background information (Section 2.0), descriptions of the different types of surface effects (Section 3.0), discussion of their application and limitations (Section 4.0), an extensive bibliography and glossary (Section 6.0 and Appendix A), and procedures used to document geologic surface effects at the NTS (Appendix C). Because a majority of US surface-effects experience is from the NTS, an overview of pertinent NTS-specific information also is provided in Appendix B. It is not within the scope of this report to explore new relationships among test parameters, physiographic setting, and the types or degree of manifestation of surface effects, but rather to compile, summarize, and capture surface-effects observations and interpretations, as well as documentation procedures and the rationale behind them.

  13. Explosive Boiling in Z-pinch Plasmas*

    Science.gov (United States)

    de Groot, John S.; Bauer, Bruno S.

    2002-11-01

    Recently, high resolution x-ray backlighting (radiography), experiments [1] have shown complex small-scale (typical sizes of 2-30 µm) structure of the exploding wire cores of both single-wire and multiwire loads subjected to 2-5 kA per 7.5-25 µm diameter wire for 1µs. The radiographs show features implying that the core has become a foam-like, liquid-vapor mixture. This foam-like state is apparently caused by explosive boiling. The point is that the wires are heated so rapidly that normal boiling (vapor bubbles are formed heterogeneously in the liquid) cannot occur. In explosive boiling, the liquid is superheated to a temperature close to the critical temperature and the phase change occurs explosively in times as short as a few ns. Homogeneous bubble nucleation occurs and the wire makes a very rapid transition from superheated liquid to a mixture of vapor and liquid droplets. This behavior will have very important effects on wire initiation in Z-pinch driven wire arrays and breakdown in MITLs. The ablation of the wire to form the coronal plasma and the remaining core plasma will be quite different for the mixed state. The mixed state is not modeled in the MHD codes that are being used to model wire initiation. We are developing models of the mixed state to include in the MHD codes. We are also developing experiments to improve the understanding of this curious state of matter. 1. Pikuz, S. A., Shelkovenko, T. A., Sinars, D. B., Greenly, J. B., Dimant, Y. S., and Hammer, D. A., Phys. Rev. Letters 83, 4313-4316 (1999). *Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed-Martin Company, for the United States Department of Energy Under Contract DE-AC04-94AL85000.

  14. Storage standards for industrial explosives, May 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    The storage standards for industrial explosives comprise the following 3 parts: (1) magazine storage standards, (2) storage operation principles, and (3) ruling and policy decisions for magazines built before May 31, 2001. There are many refinements and improvements in these revised storage standards which were first published in 1972. They come into force on May 31, 2001 and update and supersede the Revised 1982 Magazine Standards for Blasting Explosives and Detonators. The Explosives and Regulatory Division (ERD) of Natural Resources Canada worked with the Royal Canadian Mounted Police (RCMP) to develop and adopt a redesign of the walk-in magazine door to ensure greater security. The laminated door is mandatory for all new walk-in-type magazines immediately. For existing magazine installations, it will be phased in over a period of 5 to 10 years with most emphasis on those areas with a high risk of break-ins. ERD has also moved from heavy duty-locks to high-security locking hardware and is emphasizing better key control for magazines with no grandfathering on locking hardware. The wall thicknesses for the new Type 4 magazine standards have been upgraded from 5 to 7.6 cm for gravel and 15 cm for sand. Types 2, 3, 5, and 7 magazines will no longer be allowed under this new standard. Type 9 magazines will also be phased out over the next 5 years and will be replaced by an upgraded design similar to Type 4 magazine. Type 11 magazine standards have also been revised to use the ISO seacan container which has a newer door concept with ballistic materials in the walls. With these revised standards, only approved welding facilities across Canada will be issued design details of magazine doors. Each magazine will have a unique code of numbers corresponding to a tag and noted on the licence. Each of these storage standards has been upgraded to reflect higher security. tabs., figs.

  15. Thermal Environment inside a Tunnel after Thermobaric Explosion

    Directory of Open Access Journals (Sweden)

    Fei Chen

    2017-01-01

    Full Text Available The outstanding thermal damage effect of thermobaric explosive (TBX is enhanced in closed or semiclosed spaces, which may pose a serious threat to the security of people sheltered in tunnels or other protective engineering. In order to investigate the thermal environment inside a tunnel after thermobaric explosion, we developed a damage evaluation method for the thermal radiation of explosion fireballs in tunnels; secondly, the air temperature distribution inside a tunnel shortly after explosion was theoretically analyzed; finally, the dynamic thermal environment after the explosion and the influences of TBXs mass and initial ground temperature on it in cases of open and blocked tunnels were numerically simulated with the FLUENT software. The results show that the fireball thermal radiation damage occurs mainly in the vicinity of the explosion source. The air temperature inside a tunnel shortly after the explosion decreases continuously with increasing distance from the explosion source and finally reaches the initial air temperature. The decay rate of air temperature inside a tunnel is slower in the blocked case, which increases the probability of causing a secondary fire disaster. The increase of explosive mass and the initial ground temperature favor the high-temperature performance of TBX, especially for the blocked tunnel.

  16. Remote Machining and Evaluation of Explosively Filled Munitions

    Data.gov (United States)

    Federal Laboratory Consortium — This facility is used for remote machining of explosively loaded ammunition. Munition sizes from small arms through 8-inch artillery can be accommodated. Sectioning,...

  17. Large-volume sampling and preconcentration for trace explosives detection.

    Energy Technology Data Exchange (ETDEWEB)

    Linker, Kevin Lane

    2004-05-01

    A trace explosives detection system typically contains three subsystems: sample collection, preconcentration, and detection. Sample collection of trace explosives (vapor and particulate) through large volumes of airflow helps reduce sampling time while increasing the amount of dilute sample collected. Preconcentration of the collected sample before introduction into the detector improves the sensitivity of the detector because of the increase in sample concentration. By combining large-volume sample collection and preconcentration, an improvement in the detection of explosives is possible. Large-volume sampling and preconcentration is presented using a systems level approach. In addition, the engineering of large-volume sampling and preconcentration for the trace detection of explosives is explained.

  18. Vapor explosion studies for nuclear and non-nuclear industries

    Energy Technology Data Exchange (ETDEWEB)

    Taleyarkhan, Rusi P. [Arden L. Bement, Jr. Professor Nuclear Engineering, School of Nuclear Engineering, 1290 Nuclear Engineering Building, Room 108C, Purdue University, West Lafayette, IN 47905 (United States)]. E-mail: rusi@purdue.edu

    2005-05-01

    Energetic melt-water explosions are a well-established contributor to risk for nuclear reactors, and even more so for the metal casting industry. In-depth studies were undertaken in an industry-national laboratory collaborative effort to understand the root causes of explosion triggering and to evaluate methods for prevention. The steam explosion triggering studies (SETS) facility was devised and implemented for deriving key insights into explosion prevention. Data obtained indicated that onset of base surface-entrapment induced explosive boiling-caused trigger shocks is a result of complex combination of surface wettability, type of coating (organic versus inorganic), degree of coating wearoff, existence of bypass pathways for pressure relief, charring and non-condensable gas (NCG) release potential. Of these parameters NCGs were found to play a preeminent role on explosion prevention by stabilizing the melt-water steam interface and acting as a shock absorber. The role of NCGs was experimentally confirmed using SETS for their effect on stable film boiling using a downward facing heated body through which gases were injected. The presence of NCGs in the steam film layer caused a significant delay in the transitioning of film-to-nucleate boiling. The role of NCGs on explosion prevention was thereafter demonstrated more directly by introducing molten metal drops into water pools with and without NCG bubbling. Whereas spontaneous and energetic explosions took place without NCG injection, only benign quenching occurred in the presence of NCGs. Gravimetric analyses of organic coatings which are known to prevent explosion onset were also found to release significant NCGs during thermal attack by melt in the presence of water. These findings offer a novel, simple, cost-effective technique for deriving fundamental insights into melt-water explosions as well as for explosion prevention under most conditions of interest to metal casting, and possibly for nuclear reactor

  19. Explosion of a road tanker containing liquefied natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Planas-Cuchi, E.; Casal, J. [Universitat Politecnica de Catalunya, Catalonia (Spain). CERTEC; Gasulla, N.; Ventosa, A. [Autonomous Government of Catalonia (Spain). General Directorate for Emergencies and Civl Security

    2004-07-01

    The explosion of a road tanker transporting LNG (one person killed, two injured) is studied. The analysis shows that the explosion, which followed a two-step mode as for the failure of the vessel, could have been a boiling liquid expanding vapor explosion (BLEVE). The overpressure and thermal radiation have been estimated and related to the effects observed. Only a relatively small part of the energy released in the explosion was manifested in the pressure wave. The large fragments (the three pieces into which the tank was broken) and the truck motor were ejected at various distances along the tank's main axis. (author)

  20. Nonisotropic radiation of the 2013 North Korean nuclear explosion

    Science.gov (United States)

    Vavryčuk, Václav; Kim, So Gu

    2014-10-01

    On 12 February 2013, North Korea conducted an underground nuclear test in the northeastern mountainous part of the country. The explosion reached magnitude mb = 5.1 being recorded at most of seismic stations around the world and becoming one of the best ever recorded nuclear explosions in history. Similarly, as other nuclear explosions buried in Nevada, Kazakhstan, or China, the 2013 North Korean explosion is characterized by a significant nonisotropic radiation. This radiation is manifested by distinct SH and Love waves in the wave field and is inconsistent with the model of a spherically symmetric source. We show that the Love waves are not generated by a tectonic earthquake triggered on a nearby fault structures but produced by asymmetry of the explosive source caused by presence of deviatoric stress in the surrounding rock. The retrieved moment tensor of the 2013 explosion is characterized by the isotropic component of 57 ± 5%, the double-couple component of 17 ± 9%, and the compensated linear vector dipole component of 24 ± 7%. The P, T, and N axes of the moment tensor are consistent with the principal axes of the regional tectonic stress in the Korean Peninsula. A comparison of waveforms and particle motions of the 2013 explosion and the previous North Korean nuclear explosion buried in 2009 indicates that the 2013 explosion was slightly more nonisotropic.

  1. Hyperspectral requirements for detection of trace explosives agents

    Science.gov (United States)

    Schau, Harvey C.; Jennette, Bryan D.

    2006-05-01

    The ability to remotely detect explosive devices and explosive materials has generated considerable interest over the last several years. The study of remote sensing of explosives date back many decades but recent world events have forced the technology to respond to changing events and bring new technologies to the field in shorter development times than previously thought possible. Several applications have proven both desirable and illusive to date. Most notable is the desire to sense explosives within containers, sealed or otherwise. This requires a sensing device to penetrate the walls of the container, a difficult task when the container is steel or thick cement. Another is the desire to detect explosive vapors which escape from a container into the ambient air. This has been made difficult because explosives are generally formulated to have extremely low vapor pressure. (This has made many gas detection technique not strong candidates for explosive vapor detection due to the low vapor pressure of explosive materials [1].) Because of the many difficulties in a general explosive remote detection, we have attempted to bound the problem into a series of achievable steps with the first step a simple remote detection of TNT-bearing compounds. Prior to discussing our technology, we will first discuss our choice for attacking the problem in this manner.

  2. Coal-preparation baghouse protects against explosion damage

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Improvements in baghouse containment technology are reducing the risks when air and coal dust mixtures ignite and cause secondary explosions that were formerly vented. The cement industry was quick to adopt the new technology that resembles a circular pressure vessel able to withstand a 50-psi internal pressure and contain secondary explosions. Steps to minimize primary explosions include new standards for baghouse design and construction to eliminate components that cause sparks, electrical grounding, continuous dust removal, high air-to-cloth ratios, and pulse jet cleaning. Other considerations involving baghouse location, maintenance access, fire suppression, and rotary valve sizing can also reduce explosion risks. (DCK)

  3. Preliminary results for explosion bonding of beryllium to copper

    Energy Technology Data Exchange (ETDEWEB)

    Butler, D.J. [Northwest Technical Industries, Inc., Sequim, WA (United States); Dombrowski, D.E. [Brush Wellman, Inc., Cleveland, OH (United States)

    1995-09-01

    This program was undertaken to determine if explosive bonding is a viable technique for joining beryllium to copper substrates. The effort was a cursory attempt at trying to solve some of the problems associated with explosive bonding beryllium and should not be considered a comprehensive research effort. There are two issues that this program addressed. Can beryllium be explosive bonded to copper substrates and can the bonding take place without shattering the beryllium? Thirteen different explosive bonding iterations were completed using various thicknesses of beryllium that were manufactured with three different techniques.

  4. Ballistic Evaluation of Aircraft Explosion Suppression Materials

    Science.gov (United States)

    1978-01-01

    Inside tihe tank, the use of a fan as in TWS No. I was prwL\\luded. The system devised is depicted in Figure No. 5. lt is composed of two electric fans in...digital daLa acquisition and control system. This system was composed of an HP 2100 mini-computer with associated analog-to- digital converters, relay...panel damage. h’lherefore, for all of the explosion suppression materiali tested, there did not appear to he any marked difference in exit panel

  5. Luck Reveals Stellar Explosion's First Moments

    Science.gov (United States)

    2008-05-01

    Through a stroke of luck, astronomers have witnessed the first violent moments of a stellar explosion known as a supernova. Astronomers have seen thousands of these stellar explosions, but all previous supernovae were discovered days after the event had begun. This is the first time scientists have been able to study a supernova from its very beginning. Seeing one just moments after the event began is a major breakthrough that points the way to unraveling longstanding mysteries about how such explosions really work. Galaxy Before Supernova Explosion NASA's Swift satellite took these images of SN 2007uy in galaxy NGC 2770 before SN 2008D exploded. An X-ray image is on the left; image at right is in visible light. CREDIT: NASA/Swift Science Team/Stefan Immler. Large Image With Labels Large Image Without Labels Galaxy After Supernova Explosion On January 9, 2008, Swift caught a bright X-ray burst from an exploding star. A few days later, SN 2008D appeared in visible light. CREDIT: NASA/Swift Science Team/Stefan Immler. Large Image With Labels Large Image Without Labels "For years, we have dreamed of seeing a star just as it was exploding," said team leader Alicia Soderberg, a Hubble and Carnegie-Princeton Fellow at Princeton University. "This newly-born supernova is going to be the Rosetta Stone of supernova studies for years to come." Theorists had predicted for four decades that a bright burst of X-rays should be produced as the shock wave from a supernova blasts out of the star and through dense material surrounding the star. However, in order to see this burst, scientists faced the nearly-impossible challenge of knowing in advance where to point their telescopes to catch a supernova in the act of exploding. On January 9, luck intervened. Soderberg and her colleagues were making a scheduled observation of the galaxy NGC 2770, 88 million light-years from Earth, using the X-ray telescope on NASA's Swift satellite. During that observation, a bright burst of X

  6. Projection image enhancement for explosive detection systems

    Science.gov (United States)

    Yildiz, Yesna O.; Abraham, Douglas Q.; Agaian, Sos; Panetta, Karen

    2008-02-01

    Automated Explosive Detection Systems (EDS) utilizing Computed Tomography (CT) generate a series of 2-D projections from a series of X-ray scans OF luggage under inspection. 3-D volumetric images can also be generated from the collected data set. Extensive data manipulation of the 2-D and 3-D image sets for detecting the presence of explosives is done automatically by EDS. The results are then forwarded to human screeners for final review. The final determination as to whether the luggage contains an explosive and needs to be searched manually is performed by trained TSA (Transportation Security Administration) screeners following an approved TSA protocol. The TSA protocol has the screeners visually inspect the resulting images and the renderings from the EDS to determine if the luggage is suspicious and consequently should be searched manually. Enhancing those projection images delivers a higher quality screening, reduces screening time and also reduces the amount of luggage that needs to be manually searched otherwise. This paper presents a novel edge detection algorithm that is geared towards, though not exclusive to, automated explosive detection systems. The goal of these enhancements is to provide a higher quality screening process while reducing the overall screening time and luggage search rates. Accurately determining the location of edge pixels within 2-D signals, often the first step in segmentation and recognition systems indicates the boundary between overlapping objects in a luggage. Most of the edge detection algorithms such as Canny, Prewitt, Roberts, Sobel, and Laplacian methods are based on the first and second derivatives/difference operators. These operators detect the discontinuities in the differences of pixels. These approaches are sensitive to the presence of noise and could produce false edges in noisy images. Including large scale filters, may avoid errors generated by noise, but often simultaneously eliminating the finer edge details as

  7. Reaction Studies for Explosive Nuclear Astrophysics

    Science.gov (United States)

    Woods, Philip J.

    The paper describes experimental approaches to measuring key nuclear astrophysical reactions involving radioactive isotopes. Specifically the paper considers the utilisation of (d, n) and (d, p) transfer reactions to probe the strengths of key resonances in the hydrogen burning/proton capture reactions 30P(p, γ) and 26Al(p, γ). The use of a radioactive target and silicon strip detector set-ups to study the key 26Al(n, p) and (n, α) destruction reactions relevant to explosive burning conditions in core collapse supernovae is also reported.

  8. Optical chemosensors and reagents to detect explosives

    OpenAIRE

    Salinas Soler, Yolanda; Martínez Mañez, Ramón; Marcos Martínez, María Dolores; Sancenón Galarza, Félix; Costero Nieto, Ana Maria; Parra Alvarez, Margarita; Gil Grau, Salvador

    2012-01-01

    This critical review is focused on examples reported from 1947 to 2010 related to the design of chromo-fluorogenic chemosensors and reagents for explosives (141 references). © 2012 The Royal Society of Chemistry. Spanish Government (project MAT2009-14564-C04) Generalitat Valencia (project PROMETEO/2009/016) Spanish Ministry of Science and Innovation Salinas Soler, Y.; Martínez Mañez, R.; Marcos Martínez, MD.; Sancenón Galarza, F.; Costero Nieto, AM.; Parra Alvarez, M.; Gil Grau, S...

  9. Recent directions of electrospray mass spectrometry for elemental speciation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Schaumloeffel, Dirk [Universite de Pau et des Pays de l' Adour/CNRS UMR 5254, Laboratoire de Chimie Analytique Bio-Inorganique et Environnement/IPREM, Pau (France); Tholey, Andreas [Christian-Albrechts-Universitaet, Institute for Experimental Medicine - Div. Systematic Proteome Research, Kiel (Germany)

    2011-06-15

    A brief survey is given of the last 2 years' literature on electrospray mass spectrometry (ESI-MS) for speciation analysis. As observed for many years, the main recent applications in this field concern arsenic and selenium species, especially in studies encompassing combined use of molecular and element mass spectrometry. A further application field is the stoichiometric characterization of metal complexes by ESI-MS, which in some studies was assisted by nuclear magnetic resonance spectroscopy. A few examples are presented to illustrate arsenic species involved in metabolic pathways, sulfur species in oils and bitumen, and aluminum complexes. On the basis of this review, we also give an outlook of expected future developments and trends in this research field. (orig.)

  10. Plutonium, americium, and neptunium speciation in selected groundwaters

    Science.gov (United States)

    Cleveland, J.M.; Rees, T.F.; Nash, K.L.

    1985-01-01

    Speciation was determined at 25 and 90 degree C in four groundwaters from diverse sources: the Sparta aquifer in Louisiana, near the Vacherie salt dome; Mansfield No. 2 well in the Palo Duro Basin, Texas; the Stripa mine in Sweden; and the Waste Isolation Pilot Plant in New Mexico. Neptunium generally was soluble in all waters and was present exclusively as Np(V) and Np(VI), regardless of initial oxidation state. The results indicated that plutonium and neptunium solubilities were determined by the oxidation-reduction properties of the waters, i. e. , their abilities to convert these elements to soluble oxidation states. This was not the case for americium, however; Am(IV) was not detected, and the solubility of this element was determined entirely by the chemical properties of Am(III).

  11. Ruthenium speciation in model nuclear fuel process solutions

    Energy Technology Data Exchange (ETDEWEB)

    Koster, Anne L.; May, Iain; Sharrad, Clint A.; Wright, Des; Owens, Ivan F.; Charnock, John M.; Hennig, Christoph

    2004-07-01

    Ru speciation is being investigated systematically from models of high level waste solutions right through to the calcination process and the vitrified glass product. The characterisation of these species is complicated due to the fact that a wide range of ruthenium nitrosyl/nitrite/nitrate complexes can be present in nitric acid waste solutions. The general formula for these complexes is RuNO(NO{sub 3}){sub x}(NO{sub 2}){sub y}(OH){sub z}(H{sub 2}O){sub 5-x-y-z}{sup +3-x-y-z}. A range of different techniques has been used for the characterisation of these species in solution, including electron absorption spectroscopy, vibrational spectroscopy, multi-nuclear magnetic resonance spectroscopy and X-ray absorption spectroscopy. (authors)

  12. Arsenic in the aquatic environment - speciation and biological effects

    Energy Technology Data Exchange (ETDEWEB)

    Landner, L. [Swedish Environmental Research Group (MFG)

    1998-03-01

    The present report is a contribution to EC Commission`s undertaking to review existing EC provisions on the substances for which Sweden has been granted transitional provisions. The provisions imply that Sweden may maintain more stringent regulations on four substances until the end of 1998. The present report deals with speciation and biological effects of arsenic in three types of aquatic environments - marine water, estuarine or brackish water and freshwater. The similarity between arsenate and phosphate and the interference in phosphorylation reactions is discussed. It is clear that in Scandinavian inland waters the concentration of phosphorous is on average lower than in most inland waters in continental Europe. However, in most inland waters phosphorus is the limiting factor for phytoplankton development and eutrophication, which means that there is a clear risk for detrimental effects in the great majority of inland waters, also eutrophic waters 167 refs, 27 figs, 12 tabs. Exemption Substances Project (Directive 89/677/EEC)

  13. Analytical aspects of technetium speciation in spinach plants

    Energy Technology Data Exchange (ETDEWEB)

    Harms, A.V

    1998-12-31

    Spinach (Spinacea oleracea L.) is used as a model plant for terrestrial systems, because of its relation to the human food chain, its ability to accumulate heavy metals, and certain experimental advantages, e.g., the relative ease of cultivation of the seedlings and the relative ease of maceration of its leaves. The role of technetium in this research with its chemical, environmental and analytical aspects is discussed in Chapter 2. Chapters 3, 4, and 5, are dedicated to a closer look at the design of a reliable speciation method using size-exclusion chromatography (SEC). Chapter 3 illustrates the role which a `protective` compound, i.e., 2-mercaptoethanol (2-ME), an inhibitor of polyphenol oxidase, might play in plant-Tc speciation studies. The reactivity of TcO{sub 4}{sup {sup -}} and two Tc model species, i.e., anionic Tc-DTPA and cationic Tc-cyclam, with 2-ME is discussed. The Tc species are separated with low- pressure SEC, using Sephadex as stationary phase. It is shown that Tc-DTPA does react with 2-ME, presumably resulting in the formation of a Tc-complex. In Chapter 4 the development of a `mild` high-performance SEC method for separation of Tc compounds is described. It is shown that non-size effects enhance the separation characteristics of this technique resulting in the separation of TcO{sub 4}{sup {sup -}}, Tc-DTPA, and Tc-cyclam. Moreover, it is shown that the extent of these non-size effects has a close relation with the nature of the Tc species, temperature, ionic strength of the mobile phase, and nature of the stationary phase. One of the stationary phases, i.e., a copolymer of 2-hydroxyethyl methacrylate and ethylene dimethacrylate (HEMA), is also used in Chapter 5 to separate TcO{sub 4}{sup {sup -}} from plant-induced Tc species (TcX). Chapter 5 is dedicated to the development of an analytical procedure for Tc speciation in spinach plants using a dual Tc radiotracer technique. Chapters 6 and 7 are dedicated to a further investigation of the

  14. Arsenic speciation in xylem sap of cucumber (Cucumis sativus L.).

    Science.gov (United States)

    Mihucz, Victor G; Tatár, Eniko; Virág, István; Cseh, Edit; Fodor, Ferenc; Záray, Gyula

    2005-10-01

    Flow injection analysis (FIA) and high-performance liquid chromatography double-focusing sector field inductively coupled plasma mass spectrometry (HPLC-DF-ICP-MS) were used for total arsenic determination and arsenic speciation of xylem sap of cucumber plants (Cucumis sativus L.) grown in hydroponics containing 2 micromol dm(-3) arsenate or arsenite, respectively. Arsenite [As(III)], arsenate [As(V)] and dimethylarsinic acid (DMA) were identified in the sap of the plants. Arsenite was the predominant arsenic species in the xylem saps regardless of the type of arsenic treatment, and the following concentration order was determined: As(III) > As(V) > DMA. The amount of total As, calculated taking into consideration the mass of xylem sap collected, was almost equal for both treatments. Arsenite was taken up more easily by cucumber than arsenate. Partial oxidation of arsenite to arsenate (nutrient solutions, which may explain the detection of arsenate in the saps of plants treated with arsenite.

  15. Solid state gas sensors for detection of explosives and explosive precursors

    Science.gov (United States)

    Chu, Yun

    The increased number of terrorist attacks using improvised explosive devices (IEDs) over the past few years has made the trace detection of explosives a priority for the Department of Homeland Security. Considerable advances in early detection of trace explosives employing spectroscopic detection systems and other sensing devices have been made and have demonstrated outstanding performance. However, modern IEDs are not easily detectable by conventional methods and terrorists have adapted to avoid using metallic or nitro groups in the manufacturing of IEDs. Instead, more powerful but smaller compounds, such as TATP are being more frequently used. In addition, conventional detection techniques usually require large capital investment, labor costs and energy input and are incapable of real-time identification, limiting their application. Thus, a low cost detection system which is capable of continuous online monitoring in a passive mode is needed for explosive detection. In this dissertation, a thermodynamic based thin film gas sensor which can reliably detect various explosive compounds was developed and demonstrated. The principle of the sensors is based on measuring the heat effect associated with the catalytic decomposition of explosive compounds present in the vapor phase. The decomposition mechanism is complicated and not well known, but it can be affected by many parameters including catalyst, reaction temperature and humidity. Explosives that have relatively high vapor pressure and readily sublime at room temperature, like TATP and 2, 6-DNT, are ideal candidate for vapor phase detection using the thermodynamic gas sensor. ZnO, W2O 3, V2O5 and SnO2 were employed as catalysts. This sensor exhibited promising sensitivity results for TATP, but poor selectivity among peroxide based compounds. In order to improve the sensitivity and selectivity of the thermodynamic sensor, a Pd:SnO2 nanocomposite was fabricated and tested as part of this dissertation. A

  16. Chromium speciation in solid matrices and regulation: a review

    Energy Technology Data Exchange (ETDEWEB)

    Unceta, N. [University of the Basque Country, Department of Analytical Chemistry, Faculty of Pharmacy, Vitoria-Gasteiz (Spain); Seby, F. [Ultra Traces Analyses Aquitaine (UT2A), Helioparc Pau-Pyrenees, Pau (France); Malherbe, J.; Donard, O.F.X. [Universite de Pau et des Pays de l' Adour, Helioparc Pau-Pyrenees, Laboratoire de Chimie Analytique Bio-Inorganique et Environnement, IPREM, UMR CNRS 5254, Pau (France)

    2010-06-15

    In recent years, the extensive use of chromium in industrial processes has led to the promotion of several directives and recommendations by the European Union, that try to limit and regulate the presence of Cr(VI) in the environment and to protect industrial workers using chromium and end-users of manufactured products. As a consequence, new standard methods and analytical procedures have been published at the EU level for Cr(VI) determination in soil, sludge, sediment, and similar waste materials, workplace atmospheres, cement, packaging materials, industrially produced samples, and corrosion-protection layers on some components of vehicles and electrical and electronic equipment. The objective of this article is to summarize the different directives and recommendations and to critically review the currently existing standard methods and the methods published in the literature for chromium speciation in the above mentioned solid matrices, putting the emphasis on the different extraction procedures which have been developed for each matrix. Particular attention has been paid to Cr(III) and Cr(VI) inter-conversions that can occur during extraction and efforts to minimize these unwanted reactions. Although the use of NaOH-Na{sub 2}CO{sub 3} solutions with hot plate extraction seems to be the more widespread procedure, species transformation can still occur and several studies suggest that speciated isotope-dilution mass spectrometry (SIDMS) could be a suitable tool for correction of these interconversions. Besides, recent studies have proved the role of Cr(III) in chromium toxicology. As a consequence, the authors suggest an update of standard methods in the near future. (orig.)

  17. Genomic Divergence during Speciation Driven by Adaptation to Altitude

    Science.gov (United States)

    Chapman, Mark A.; Hiscock, Simon J.; Filatov, Dmitry A.

    2013-01-01

    Even though Darwin’s “On the Origin of Species” implied selection being the main driver of species formation, the role of natural selection in speciation remains poorly understood. In particular, it remains unclear how selection at a few genes can lead to genomewide divergence and the formation of distinct species. We used a particularly attractive clear-cut case of recent plant ecological speciation to investigate the demography and genomic bases of species formation driven by adaptation to contrasting conditions. High-altitude Senecio aethnensis and low-altitude S. chrysanthemifolius live at the extremes of a mountain slope on Mt. Etna, Sicily, and form a hybrid zone at intermediate altitudes but remain morphologically distinct. Genetic differentiation of these species was analyzed at the DNA polymorphism and gene expression levels by high-throughput sequencing of transcriptomes from multiple individuals. Out of ∼18,000 genes analyzed, only a small number (90) displayed differential expression between the two species. These genes showed significantly elevated species differentiation (FST and Dxy), consistent with diversifying selection acting on these genes. Genomewide genetic differentiation of the species is surprisingly low (FST = 0.19), while ∼200 genes showed significantly higher (false discovery rate 0.6) interspecific differentiation and evidence for local adaptation. Diversifying selection at only a handful of loci may be enough for the formation and maintenance of taxonomically well-defined species, despite ongoing gene flow. This provides an explanation of why many closely related species (in plants, in particular) remain phenotypically and ecologically distinct despite ongoing hybridization, a question that has long puzzled naturalists and geneticists alike. PMID:24077768

  18. Arsenic extraction and speciation in plants: Method comparison and development.

    Science.gov (United States)

    Zhao, Di; Li, Hong-Bo; Xu, Jia-Yi; Luo, Jun; Ma, Lena Qiying

    2015-08-01

    We compared four methods to extract arsenic (As) from three different plants containing different As levels for As speciation with the goal of developing a more efficient method, i.e., As-hyperaccumulator Pteris vittata at 459-7714mgkg(-1), rice seedling at 53.4-574mgkg(-1), and tobacco leaf at 0.32-0.35mgkg(-1). The four methods included heating with dilute HNO3, and sonication with phosphate buffered solution, methanol/water, and ethanol/water, with As being analyzed using high-performance liquid chromatography coupled with inductively-coupled plasma mass spectrometry (HPLC-ICP-MS). Among the four methods, the ethanol/water method produced the most satisfactory extraction efficiency (~80% for the roots and >85% for the fronds) without changing As species based on P. vittata. The lower extraction efficiency from P. vittata roots was attributed to its dominance by arsenate (82%) while arsenite dominated in the fronds (89%). The ethanol/water method used sample:solution ratio of 1:200 (0.05g:10mL) with 50% ethanol and 2h sonication. Based on different extraction times (0.5-2h), ethanol concentrations (25-100%) and sample:solution ratios (1:50-1:300), the optimized ethanol/water method used less ethanol (25%) and time (0.5h for the fronds and 2h for the roots). Satisfactory extraction was also obtained for tobacco leaf (78-92%) and rice seedlings (~70%) using the optimized method, which was better than the other three methods. Based on satisfactory extraction efficiency with little change in As species during extraction from three plants containing different As levels, the optimized method has the potential to be used for As speciation in other plants. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Hybrid speciation in sparrows II: a role for sex chromosomes?

    Science.gov (United States)

    Elgvin, Tore O; Hermansen, Jo S; Fijarczyk, Anna; Bonnet, Timothée; Borge, Thomas; Saether, Stein A; Voje, Kjetil L; Saetre, Glenn-Peter

    2011-09-01

    Homoploid hybrid speciation in animals is poorly understood, mainly because of the scarcity of well-documented cases. Here, we present the results of a multilocus sequence analysis on the house sparrow (Passer domesticus), Spanish sparrow (P. hispaniolensis) and their proposed hybrid descendant, the Italian sparrow (P. italiae). The Italian sparrow is shown to be genetically intermediate between the house sparrow and Spanish sparrow, exhibiting genealogical discordance and a mosaic pattern of alleles derived from either of the putative parental species. The average variation on the Z chromosome was significantly reduced compared with autosomal variation in the putative parental species, the house sparrow and Spanish sparrow. Additionally, divergence between the two species was elevated on the Z chromosome relative to the autosomes. This pattern of variation and divergence is consistent with reduced introgression of Z-linked genes and/or a faster-Z effect (increased rate of adaptive divergence on the Z). F(ST) -outlier tests were consistent with the faster-Z hypothesis: two of five Z-linked loci (CHD1Z and PLAA) were identified as candidates for being subject to positive, divergent selection in the putative parental species. Interestingly, the two latter genes showed a mosaic pattern in the (hybrid) Italian sparrow; that is, the Italian sparrow was found to be fixed for Spanish sparrow alleles at CHD1Z and to mainly have house sparrow alleles at PLAA. Preliminary evidence presented in this study thus suggests that sex chromosomes may play a significant role in this case of homoploid hybrid speciation. © 2011 Blackwell Publishing Ltd.

  20. Mercury speciation during in situ thermal desorption in soil

    Energy Technology Data Exchange (ETDEWEB)

    Park, Chang Min, E-mail: cmpark80@gmail.com; Katz, Lynn E.; Liljestrand, Howard M.

    2015-12-30

    Highlights: • Impact of soil conditions on distribution and phase transitions of Hg was identified. • Metallic Hg was slowly transformed to Hg{sup 0} gas until the temperature reached 358.15 K. • Phase change of HgCl{sub 2(s)} completely occurred without decomposition at 335.15 K. • HgS remained solid in dry soil sharply decreased in the narrow temperature range. • Hg gas can be easily captured with higher vapor pressures of soil compositions. - Abstract: Metallic mercury (Hg{sup 0}) and its compounds are highly mobile and toxic environmental pollutants at trace level. In situ thermal desorption (ISTD) is one of the soil remediation processes applying heat and vacuum simultaneously. Knowledge of thermodynamic mercury speciation is imperative to understand the fate and transport of mercury during thermal remediation and operate the treatment processes in a cost-effective manner. Hence, speciation model for inorganic mercury was developed over a range of environmental conditions to identify distribution of dissolved mercury species and potential transformations of mercury at near source environment. Simulation of phase transitions for metallic mercury, mercury(II) chloride and mercury sulfide with temperature increase showed that complete vaporization of metallic mercury and mercury(II) chloride were achieved below the boiling point of water. The effect of soil compositions on mercury removal was also evaluated to better understand thermal remediation process. Higher vapor pressures expected both from soil pore water and inorganic carbonate minerals in soil as well as creation of permeability were significant for complete vaporization and removal of mercury.

  1. Finding genes and lineages under selection in speciation.

    Science.gov (United States)

    Hart, Michael W; Guerra, Vanessa

    2017-07-01

    What are the genes and traits that respond to selection and cause prezygotic reproductive isolation between species? This question has been hard to answer because genomes are large, the targets of selection may be scattered across the genome (Sabeti et al., ) and different genes may respond to the same selective pressure in different populations (Scheinfeldt et al., ). In this issue of Molecular Ecology, Weber et al. () use a clever comparative approach and leading-edge transcriptomic methods to identify the species and genes under positive selection for divergence between brittle stars (the echinoderm class Ophiuroidea) in the Ophioderma longicauda species complex. They found convincing evidence of positive or diversifying selection acting on two genes encoding ion channels that form part of the signal transduction cascade within the sperm in response to pheromones. Evidence for selection was concentrated in genes from one species (called C5, with internal fertilization and female parental care of brooded juveniles and not in the other species (called C3, with more conventional broadcast spawning and planktonic development of embryos and larvae). That analysis greatly extends the range of taxa, life history traits and molecules that are associated with positive selection in speciation. It also illustrates some of the current limitations on the application of RNAseq methods in the search for the targets of selection in nonmodel organisms like brittle stars. From both points of view, the new work by Weber et al. () has important implications for our understanding of speciation in the ocean. © 2017 John Wiley & Sons Ltd.

  2. Technetium Inventory, Distribution, and Speciation in Hanford Tanks

    Energy Technology Data Exchange (ETDEWEB)

    Serne, R. Jeffrey; Rapko, Brian M.

    2014-05-02

    The purpose of this report is three fold: 1) assemble the available information regarding technetium (Tc) inventory, distribution between phases, and speciation in Hanford’s 177 storage tanks into a single, detailed, comprehensive assessment; 2) discuss the fate (distribution/speciation) of Tc once retrieved from the storage tanks and processed into a final waste form; and 3) discuss/document in less detail the available data on the inventory of Tc in other "pools" such as the vadose zone below inactive cribs and trenches, below single-shell tanks (SSTs) that have leaked, and in the groundwater below the Hanford Site. A thorough understanding of the inventory for mobile contaminants is key to any performance or risk assessment for Hanford Site facilities because potential groundwater and river contamination levels are proportional to the amount of contaminants disposed at the Hanford Site. Because the majority of the total 99Tc produced at Hanford (~32,600 Ci) is currently stored in Hanford’s 177 tanks (~26,500 Ci), there is a critical need for knowledge of the fate of this 99Tc as it is removed from the tanks and processed into a final solid waste form. Current flow sheets for the Hanford Waste Treatment and Immobilization Plant process show most of the 99Tc will be immobilized as low-activity waste glass that will remain on the Hanford Site and disposed at the Integrated Disposal Facility (IDF); only a small fraction will be shipped to a geologic repository with the immobilized high-level waste. Past performance assessment studies, which focused on groundwater protection, have shown that 99Tc would be the primary dose contributor to the IDF performance.

  3. Selenium Speciation and Management in Wet FGD Systems

    Energy Technology Data Exchange (ETDEWEB)

    Searcy, K; Richardson, M; Blythe, G; Wallschlaeger, D; Chu, P; Dene, C

    2012-02-29

    This report discusses results from bench- and pilot-scale simulation tests conducted to determine the factors that impact selenium speciation and phase partitioning in wet FGD systems. The selenium chemistry in wet FGD systems is highly complex and not completely understood, thus extrapolation and scale-up of these results may be uncertain. Control of operating parameters and application of scrubber additives have successfully demonstrated the avoidance or decrease of selenite oxidation at the bench and pilot scale. Ongoing efforts to improve sample handling methods for selenium speciation measurements are also discussed. Bench-scale scrubber tests explored the impacts of oxidation air rate, trace metals, scrubber additives, and natural limestone on selenium speciation in synthetic and field-generated full-scale FGD liquors. The presence and concentration of redox-active chemical species as well as the oxidation air rate contribute to the oxidation-reduction potential (ORP) conditions in FGD scrubbers. Selenite oxidation to the undesirable selenate form increases with increasing ORP conditions, and decreases with decreasing ORP conditions. Solid-phase manganese [Mn(IV)] appeared to be the significant metal impacting the oxidation of selenite to selenate. Scrubber additives were tested for their ability to inhibit selenite oxidation. Although dibasic acid and other scrubber additives showed promise in early clear liquor (sodium based and without calcium solids) bench-scale tests, these additives did not show strong inhibition of selenite oxidation in tests with higher manganese concentrations and with slurries from full-scale wet FGD systems. In bench-tests with field liquors, addition of ferric chloride at a 250:1 iron-to-selenium mass ratio sorbed all incoming selenite to the solid phase, although addition of ferric salts had no impact on native selenate that already existed in the field slurry liquor sample. As ORP increases, selenite may oxidize to selenate more

  4. Influence of natural organic matter on the speciation of radionuclides in a geochemistry context; Influence de la matiere organique naturelle sur la speciation des radionucleides en contexte geochimique

    Energy Technology Data Exchange (ETDEWEB)

    Marang, L

    2007-09-15

    The principal aim of this work is the study of the influence of natural organic matter, in particularly humic substances (HS), on the speciation of radionuclides (RN). The studied radionuclides are cobalt (II), europium (III) and uranium (VI). It has been shown that mobility and bioavailability of a metal are related to its speciation. The NICA-Donnan model describes metal ion binding to NOM: it accounts for NOM chemical heterogeneity, competition during binding and ionic strength effects. However the model has been calibrated with a limited number of experimental data for the RN. Indeed there is only a few speciation technique available for the study of the interactions RN-HS. Within the framework of this study, we have developed and optimised speciation technique (Flux Donnan Membrane Technique and the use of an un-solubilized humic acid) in order to acquire new experimental data, we have also studied the effect of the competition on RN speciation and finally we have tested the model capacity to predict the RN behavior in laboratory or in situ. (author)

  5. Explosive formation of coherent particle jets

    Science.gov (United States)

    Frost, David; Ruel, Jean-Frederic; Zarei, Zouya; Goroshin, Sam; Gregoire, Yann; Zhang, Fan; Milne, Alec; Longbottom, Aaron

    2013-06-01

    A high-speed jet of solid particles may be formed by detonating an explosive layer lining the outside of a conically-shaped volume of particles. Experiments have been carried out to determine the velocity history and the coherency of a particle jet formed using this shaped-charge arrangement. Important parameters include the cone angle, the ratio of the masses of the explosive and particles, and the particle size and density. Dense particles (e.g., iron) form thin, stable, coherent jets, whereas lighter particles (e.g., glass or Al) lead to more diffuse jets. The jet velocities observed experimentally were close to the predictions from a Gurney velocity formulation for conical geometry. The effects of cone angle and particle density on the jet formation and development were explored with calculations using a multimaterial hydrocode. The simulations indicate that the converging shock and Mach disk within the particle bed have a strong influence on the uniformity of the particle density field. With iron particles, the particle volume remains coherent whereas for glass particles, during the particle acceleration phase, the shock interactions within the particle bed cause the particles to be concentrated in a thin shell surrounding a low density region.

  6. Biotreatment of explosive-contaminated soils

    Energy Technology Data Exchange (ETDEWEB)

    Shen, C. F.; Guiot, S. R.; Manuel, M. F.; Havari, J. [National Research Council of Canada, Biotechnology Research Institute, Montreal, PQ (Canada)

    1995-12-31

    A research project was undertaken to develop a process for the remediation of soils which have been contaminated by 2,4,6 trinitrotoluene (TNT), and/or by hexahydro-1.3,5-trinitro-1,3,5-triazine (RDX), two of the most widely used military explosives. In this context, municipal activated sludge and anaerobic sludge were evaluated for their TNT and RDX degrading ability. Results showed that TNT was easily degraded in the bioslurry reactors. Complete removal was achieved in less than two weeks of reactor operation. Removal efficiency was further increased by the addition of anaerobic sludge. RDX degradation was poor under most operating conditions. Only 25 per cent to 40 per cent of RDX was degraded after five weeks of operation, however, in one of the reactors which received an injection of 20 per cent anaerobic sludge, and was operated under anaerobic conditions, RDX removal was 100 per cent after 37 days. These results support the conclusion that municipal anaerobic sludge and activated sludge are rich sources of TNT and RDX degrading organisms, therefore, bioslurry reactors may be a cost-effective approach to on-site bioremediation of explosive-contaminated soils.

  7. The Development of Explosive Metalworking in Poland

    Directory of Open Access Journals (Sweden)

    Babul W.

    2014-10-01

    Full Text Available The author coordinated the research in Poland by the collaboration with civil and military scientific and research centres. In result they elaborated detonation process of spraying coats designed and constructed stands equipped with detonative devices, they also elaborated the techniques of basic coating parameter measurement and built devices for commercial and scientific services. In the research the author's achievements within the range of explosive welding have been used. The experience of the scientific teams was very effective. It was observed that many phenomena that take place in the processes of detonative layer coating and explosive welding are the same. In order to obtain a required connection the plastic strain of the connected material surfaces has to be achieved and cumulative flows have to be formed. There are a similar range of the connecting process conditions and the mechanisms of plastic strain. The highest connection strength is obtained when an intermediate zone is formed. The zone has to be composed of the two connected materials. The intermediate layer is formed as a result of mechanical alloying of the materials due to large plastic strain. The plastic strain leads to forming meta-stable phases that have properties of pseudo solid solution, chemical compounds, intermetallic phases and fragmentation corresponding to nanomaterials and amorphous states.

  8. Surface detonation in type Ia supernova explosions?

    Science.gov (United States)

    Röpke, F. K.; Woosley, S. E.

    2006-09-01

    We explore the evolution of thermonuclear supernova explosions when the progenitor white dwarf star ignites asymmetrically off-center. Several numerical simulations are carried out in two and three dimensions to test the consequences of different initial flame configurations such as spherical bubbles displaced from the center, more complex deformed configurations, and teardrop-shaped ignitions. The burning bubbles float towards the surface while releasing energy due to the nuclear reactions. If the energy release is too small to gravitationally unbind the star, the ash sweeps around it, once the burning bubble approaches the surface. Collisions in the fuel on the opposite side increase its temperature and density and may - in some cases - initiate a detonation wave which will then propagate inward burning the core of the star and leading to a strong explosion. However, for initial setups in two dimensions that seem realistic from pre-ignition evolution, as well as for all three-dimensional simulations the collimation of the surface material is found to be too weak to trigger a detonation.

  9. FAA bulk technology overview for explosives detection

    Science.gov (United States)

    Novakoff, Alan K.

    1993-04-01

    The Federal Aviation Administration (FAA) is the leading federal agency responsible for encouraging and fostering the development of a safe, secure, and efficient national airspace system (NAS). Our goal is to establish an operating environment that ensures a threat-free system to preclude acts of terrorism and fatalities. As part of the process to meet this goal, our research and development activities continually search for technologies to ensure aviation security. Recent acts of terrorism against the aviation community have demonstrated an increasing level of sophistication in the design and deployment of explosive devices. In order to prevent the introduction of explosives onto an aircraft they must be detected prior to passenger and baggage loading. The Bulk Detection program is one method of developing a number of technologies that 'see' into and 'alarm' on suspect baggage. These detection devices must be capable of providing this serve with a confidence commensurate with the state-of-the- art available today. This program utilizes the expertise of government agencies, universities and industries working toward constructing their plans and executing their designs to produce the best available equipment.

  10. Contamination with explosives in analytical laboratory procedure.

    Science.gov (United States)

    Pawłowski, Wojciech; Matyjasek, Łukasz; Cieślak, Katarzyna; Karpińska, Monika

    2017-10-18

    The philosophy underlying the procedure with the trace from the moment of the securing of the evidence up to its ultimate inspection is of significance for the result achieved. Hands of the people who conduct investigative action or of the experts involved in examinations contaminated with explosives may adversely affect results of the analyses. The contamination effect is one of the most dangerous consequences of non-observance of the strict rules in handling the traces secured on the crime scene. The aim of this research work was to examine whether at all, and if so, with what an ease and at which stage of the analytical procedure there occurs a likely contamination of the evidence material with explosives such as TNT, RDX, PETN, NG. The analytical procedure employed consisted of the sampling stage, extraction from gauze swab, transfer of the extract and execution of an instrumental analysis based on gas chromatography with electron capture detector (ECD). The most significant contamination effect was observed during the analytical procedure for TNT, followed by a similar, yet less pronounced, for RDX and PETN. Contaminating the research material with nitroglycerin, known to be liquid under normal conditions, proved unsuccessful. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. The Interaction of Two Underwater Explosion Bubbles

    Science.gov (United States)

    Milligan, Charles; Duncan, James

    1996-11-01

    The interaction between two growing and collapsing underwater explosion bubbles is studied experimentally and numerically. In the experiments, the bubbles are generated by detonating small Lead Azide explosive charges submerged in a transparent water tank, and the resulting interactions are photographed using a high-speed camera. The parametric studies include simultaneous detonation of two charges of different sizes, and detonation of identically sized charges at staggered times. When the time delay between detonations is significant, the collapsing first bubble forms a jet directed away from the expanding second bubble and then re-expands nonspherically. During the re-expansion of the first bubble, a micro-jet forms in the second bubble. Eventually this micro-jet pierces the side of the second bubble farthest from the first and vortex rings are formed. Numerical simulations of the interaction phenomena are achieved using a boundary element method. By partitioning the system into computational sub-domains it is possible to replicate many relevant physical details including jet formation, fluid-fluid impact, and bubble re-expansion after complete jet penetration. The numerical results are in qualitative agreement with the experimental findings.

  12. Jetting formation of the explosively loaded powders

    Science.gov (United States)

    Xue, Kun; Yu, Qiqi

    2017-10-01

    The formation of jet-like structures is widely reported in the explosive dispersal of powders surrounding high explosive charges. The jetting of powder beds initiates upon the shock wave reaches the outer edge of the charge. Opposed to the interface instability theory, a hollow sphere based bulk fragmentation model is established to account for the jetting of powders. A two-phase process, namely the nucleation and free expansion of hollow spheres, corresponds to the unloading process of the powder compact caused by the rarefaction waves which governs the fragmentation of the powders. The separation between adjacent hollow spheres dictates the size of the particle clusters, which would evolve into particle jets in later times. The predicted breakup time and the size of particle jets agree well with the experimental results. The increased moisture content in powders results in an increased number of particle jets. This moisture effect can be understood in light of the varied energy distribution due to the incompressibility of the interstitial liquids trapped inside the inter-grain pores. The portion of shock energy which is not consumed in the shock compaction of the wet powders would be dissipated through the viscous shear flows during the unloading of the wet powder compact. The excessive viscous energy requires to activate more localized shear flows, accordingly leading to an increased number of particle jets.

  13. Robustness Assessment of Building Structures under Explosion

    Directory of Open Access Journals (Sweden)

    Mark Waggoner

    2012-12-01

    Full Text Available Over the past decade, much research has focused on the behaviour of structures following the failure of a key structural component. Particular attention has been given to sudden column loss, though questions remain as to whether this event-independent scenario is relevant to actual extreme events such as explosion. Few studies have been conducted to assess the performance of floor slabs above a failed column, and the computational tools used have not been validated against experimental results. The research program presented in this paper investigates the adequacy of sudden column loss as an idealisation of local damage caused by realistic explosion events, and extends prior work by combining the development of accurate computational models with large-scale testing of a typical floor system in a prototypical steel-framed structure. The floor system consists of corrugated decking topped by a lightly reinforced concrete slab that is connected to the floor beams through shear studs. The design is consistent with typical building practices in the US. The first test has been completed, and subsequent tests are currently being planned. This paper addresses the importance of robustness design for localized damage and includes a detailed description regarding how the research program advances the current state of knowledge for assessing robustness of compositely constructed steel-framed buildings.

  14. SANFO: The missing link in explosives technology

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, R.J. [Johnson Hi-Tech Australia Pty Ltd, Queensland (Australia)

    1996-12-01

    The development of SANFO has provided the mining industry with a low cost high gas volume, variable density, blasting agent which can be blended on site in a simple agitator mixing and charging system by mine site employees. During the last decade most major explosives manufacturers have been promoting high density, high shock energy blasting agents. To offset the cost of these products they have relied on expanded borehole patterns. It has since been discovered that lower VOD products are more effective in most overburden geologies due to the longer explosion pressure period and lower shock energy. These characteristics also reduce energy loss consumed in pulverization around the perimeter of borehole. The major advantages of SANFO compared with normal ANFO or heavy ANFO are as listed. Due to problems associated with bulling when blasting soft geologies at BHP`s Riverside Mine in Central Queensland, Australia, the company was invited to develop a low density blasting agent which could be blended as required on the mine site. This paper describes the problems associated with blasting softer geologies and the use of sawdust as a cost-effective bulking agent.

  15. Analysis of Explosives by GC-UV.

    Science.gov (United States)

    Andrasko, Jan; Lagesson-Andrasko, Ludmila; Dahlén, Johan; Jonsson, Bengt-Harald

    2017-07-01

    A mixture of explosives was analyzed by gas chromatography (GC) linked to ultraviolet (UV) spectrophotometry that enabled detection in the range of 178-330 nm. The gas-phase UV spectra of 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), ethylene glycol dinitrate (EGDN), glycerine trinitrate (NG, nitroglycerine), triacetone triperoxide (TATP), and pentaerythritol tetranitrate (PETN) were successfully recorded. The most interesting aspect of the current application is that it enabled simultaneous detection of both the target analyte and its decomposition products. At suitable elevated temperatures of the transfer line between the GC instrument and the UV detector, a partial decomposition was accomplished. Detection was made in real time and resulted in overlaid spectra of the mother compound and its decomposition product. Hence, the presented approach added another level to the qualitative identification of the explosives in comparison with traditional methods that relies only on the detection of the target analyte. As expected, the decomposition product of EGDN, NG, and PETN was NO, while TATP degraded to acetone. DNT and TNT did not exhibit any decomposition at the temperatures used. © 2017 American Academy of Forensic Sciences.

  16. Hydrogen-poor superluminous stellar explosions.

    Science.gov (United States)

    Quimby, R M; Kulkarni, S R; Kasliwal, M M; Gal-Yam, A; Arcavi, I; Sullivan, M; Nugent, P; Thomas, R; Howell, D A; Nakar, E; Bildsten, L; Theissen, C; Law, N M; Dekany, R; Rahmer, G; Hale, D; Smith, R; Ofek, E O; Zolkower, J; Velur, V; Walters, R; Henning, J; Bui, K; McKenna, D; Poznanski, D; Cenko, S B; Levitan, D

    2011-06-08

    Supernovae are stellar explosions driven by gravitational or thermonuclear energy that is observed as electromagnetic radiation emitted over weeks or more. In all known supernovae, this radiation comes from internal energy deposited in the outflowing ejecta by one or more of the following processes: radioactive decay of freshly synthesized elements (typically (56)Ni), the explosion shock in the envelope of a supergiant star, and interaction between the debris and slowly moving, hydrogen-rich circumstellar material. Here we report observations of a class of luminous supernovae whose properties cannot be explained by any of these processes. The class includes four new supernovae that we have discovered and two previously unexplained events (SN 2005ap and SCP 06F6) that we can now identify as members of the same class. These supernovae are all about ten times brighter than most type Ia supernova, do not show any trace of hydrogen, emit significant ultraviolet flux for extended periods of time and have late-time decay rates that are inconsistent with radioactivity. Our data require that the observed radiation be emitted by hydrogen-free material distributed over a large radius (∼10(15) centimetres) and expanding at high speeds (>10(4) kilometres per second). These long-lived, ultraviolet-luminous events can be observed out to redshifts z > 4.

  17. Importance of ICPMS for speciation analysis is changing: future trends for targeted and non-targeted element speciation analysis.

    Science.gov (United States)

    Feldmann, Joerg; Raab, Andrea; Krupp, Eva M

    2018-01-01

    This article is aimed at researchers interested in organic molecules which contain a heteroatom but who have never considered using inductively coupled plasma mass spectrometry (ICPMS) or who have used ICPMS for years and developed numerous methods for analysis of target elemental species. We try to illustrate (1) that ICPMS has been very useful for speciation analysis of metal(loid) target species and that there is now a trend to replace the costly detector with cheaper detection systems for routine target analysis, and (2) that ICPMS has been used and will be used even more in the future for non-targeted analysis of elements which are not normally associated with ICPMS analysis, such as non-metals such as sulfur, phosphorus, chlorine and fluorine. Graphical Abstract Starting with HPLC-ICPMS for non-targeted analysis of heteroatom containing molecules, once target molecule is identified alternative detectors can be used for routine measurements.

  18. Speciation on oceanic islands: rapid adaptive divergence vs. cryptic speciation in a Guadalupe Island songbird (Aves: Junco.

    Directory of Open Access Journals (Sweden)

    Pau Aleixandre

    Full Text Available The evolutionary divergence of island populations, and in particular the tempo and relative importance of neutral and selective factors, is of central interest to the study of speciation. The rate of phenotypic evolution upon island colonization can vary greatly among taxa, and cases of convergent evolution can further confound the inference of correct evolutionary histories. Given the potential lability of phenotypic characters, molecular dating of insular lineages analyzed in a phylogenetic framework provides a critical tool to test hypotheses of phenotypic divergence since colonization. The Guadalupe junco is the only insular form of the polymorphic dark-eyed junco (Junco hyemalis, and shares eye and plumage color with continental morphs, yet presents an enlarged bill and reduced body size. Here we use variation in mtDNA sequence, morphological traits and song variables to test whether the Guadalupe junco evolved rapidly following a recent colonization by a mainland form of the dark-eyed junco, or instead represents a well-differentiated "cryptic" lineage adapted to the insular environment through long-term isolation, with plumage coloration a result of evolutionary convergence. We found high mtDNA divergence of the island lineage with respect to both continental J. hyemalis and J. phaeonotus, representing a history of isolation of about 600,000 years. The island lineage was also significantly differentiated in morphological and male song variables. Moreover, and contrary to predictions regarding diversity loss on small oceanic islands, we document relatively high levels of both haplotypic and song-unit diversity on Guadalupe Island despite long-term isolation in a very small geographic area. In contrast to prevailing taxonomy, the Guadalupe junco is an old, well-differentiated evolutionary lineage, whose similarity to mainland juncos in plumage and eye color is due to evolutionary convergence. Our findings confirm the role of remote islands

  19. Speciation on Oceanic Islands: Rapid Adaptive Divergence vs. Cryptic Speciation in a Guadalupe Island Songbird (Aves: Junco)

    Science.gov (United States)

    Aleixandre, Pau; Hernández Montoya, Julio; Milá, Borja

    2013-01-01

    The evolutionary divergence of island populations, and in particular the tempo and relative importance of neutral and selective factors, is of central interest to the study of speciation. The rate of phenotypic evolution upon island colonization can vary greatly among taxa, and cases of convergent evolution can further confound the inference of correct evolutionary histories. Given the potential lability of phenotypic characters, molecular dating of insular lineages analyzed in a phylogenetic framework provides a critical tool to test hypotheses of phenotypic divergence since colonization. The Guadalupe junco is the only insular form of the polymorphic dark-eyed junco (Junco hyemalis), and shares eye and plumage color with continental morphs, yet presents an enlarged bill and reduced body size. Here we use variation in mtDNA sequence, morphological traits and song variables to test whether the Guadalupe junco evolved rapidly following a recent colonization by a mainland form of the dark-eyed junco, or instead represents a well-differentiated “cryptic” lineage adapted to the insular environment through long-term isolation, with plumage coloration a result of evolutionary convergence. We found high mtDNA divergence of the island lineage with respect to both continental J. hyemalis and J. phaeonotus, representing a history of isolation of about 600,000 years. The island lineage was also significantly differentiated in morphological and male song variables. Moreover, and contrary to predictions regarding diversity loss on small oceanic islands, we document relatively high levels of both haplotypic and song-unit diversity on Guadalupe Island despite long-term isolation in a very small geographic area. In contrast to prevailing taxonomy, the Guadalupe junco is an old, well-differentiated evolutionary lineage, whose similarity to mainland juncos in plumage and eye color is due to evolutionary convergence. Our findings confirm the role of remote islands in driving

  20. Quantitative uranium speciation with U M{sub 4,5}-edge HERFD absorption spectra

    Energy Technology Data Exchange (ETDEWEB)

    Kvashnina, Kristina O.; Rossberg, Andre [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Molecular Structures

    2017-06-01

    This report gives a brief description of the quantitative uranium speciation performed by iterative transformation factor analysis (ITFA) of High Energy Resolution X-ray Fluorescence Detection (HERFD) data collected at the M{sub 4,5} edge.