WorldWideScience

Sample records for explicit-time description method

  1. Verifying Real-Time Systems using Explicit-time Description Methods

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2009-12-01

    Full Text Available Timed model checking has been extensively researched in recent years. Many new formalisms with time extensions and tools based on them have been presented. On the other hand, Explicit-Time Description Methods aim to verify real-time systems with general untimed model checkers. Lamport presented an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables for time requirements. This paper proposes a new explicit-time description method with no reliance on global variables. Instead, it uses rendezvous synchronization steps between the Tick process and each system process to simulate time. This new method achieves better modularity and facilitates usage of more complex timing constraints. The two explicit-time description methods are implemented in DIVINE, a well-known distributed-memory model checker. Preliminary experiment results show that our new method, with better modularity, is comparable to Lamport's method with respect to time and memory efficiency.

  2. An Efficient Explicit-time Description Method for Timed Model Checking

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2009-12-01

    Full Text Available Timed model checking, the method to formally verify real-time systems, is attracting increasing attention from both the model checking community and the real-time community. Explicit-time description methods verify real-time systems using general model constructs found in standard un-timed model checkers. Lamport proposed an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables to model time requirements. Two methods, the Sync-based Explicit-time Description Method using rendezvous synchronization steps and the Semaphore-based Explicit-time Description Method using only one global variable were proposed; they both achieve better modularity than Lamport's method in modeling the real-time systems. In contrast to timed automata based model checkers like UPPAAL, explicit-time description methods can access and store the current time instant for future calculations necessary for many real-time systems, especially those with pre-emptive scheduling. However, the Tick process in the above three methods increments the time by one unit in each tick; the state spaces therefore grow relatively fast as the time parameters increase, a problem when the system's time period is relatively long. In this paper, we propose a more efficient method which enables the Tick process to leap multiple time units in one tick. Preliminary experimental results in a high performance computing environment show that this new method significantly reduces the state space and improves both the time and memory efficiency.

  3. Explicit time marching methods for the time-dependent Euler computations

    International Nuclear Information System (INIS)

    Tai, C.H.; Chiang, D.C.; Su, Y.P.

    1997-01-01

    Four explicit type time marching methods, including one proposed by the authors, are examined. The TVD conditions of this method are analyzed with the linear conservation law as the model equation. Performance of these methods when applied to the Euler equations are numerically tested. Seven examples are tested, the main concern is the performance of the methods when discontinuities with different strengths are encountered. When the discontinuity is getting stronger, spurious oscillation shows up for three existing methods, while the method proposed by the authors always gives the results with satisfaction. The effect of the limiter is also investigated. To put these methods in the same basis for the comparison the same spatial discretization is used. Roe's solver is used to evaluate the fluxes at the cell interface; spatially second-order accuracy is achieved by the MUSCL reconstruction. 19 refs., 8 figs

  4. Implicit and explicit timing in oculomotor control.

    Directory of Open Access Journals (Sweden)

    Ilhame Ameqrane

    Full Text Available The passage of time can be estimated either explicitly, e.g. before leaving home in the morning, or implicitly, e.g. when catching a flying ball. In the present study, the latency of saccadic eye movements was used to evaluate differences between implicit and explicit timing. Humans were required to make a saccade between a central and a peripheral position on a computer screen. The delay between the extinction of a central target and the appearance of an eccentric target was the independent variable that could take one out of four different values (400, 900, 1400 or 1900 ms. In target trials, the delay period lasted for one of the four durations randomly. At the end of the delay, a saccade was initiated by the appearance of an eccentric target. Cue&target trials were similar to target trials but the duration of the delay was visually cued. In probe trials, the duration of the upcoming delay was cued, but there was no eccentric target and subjects had to internally generate a saccade at the estimated end of the delay. In target and cue&target trials, the mean and variance of latency distributions decreased as delay duration increased. In cue&target trials latencies were shorter. In probe trials, the variance increased with increasing delay duration and scalar variability was observed. The major differences in saccadic latency distributions were observed between visually-guided (target and cue&target trials and internally-generated saccades (probe trials. In target and cue&target trials the timing of the response was implicit. In probe trials, the timing of the response was internally-generated and explicitly based on the duration of the visual cue. Scalar timing was observed only during probe trials. This study supports the hypothesis that there is no ubiquitous timing system in the brain but independent timing processes active depending on task demands.

  5. Qualitative Descriptive Methods in Health Science Research.

    Science.gov (United States)

    Colorafi, Karen Jiggins; Evans, Bronwynne

    2016-07-01

    The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

  6. Automated Linguistic Personality Description and Recognition Methods

    Directory of Open Access Journals (Sweden)

    Danylyuk Illya

    2016-12-01

    Full Text Available Background: The relevance of our research, above all, is theoretically motivated by the development of extraordinary scientific and practical interest in the possibilities of language processing of huge amount of data generated by people in everyday professional and personal life in the electronic forms of communication (e-mail, sms, voice, audio and video blogs, social networks, etc.. Purpose: The purpose of the article is to describe the theoretical and practical framework of the project "Communicative-pragmatic and discourse-grammatical lingvopersonology: structuring linguistic identity and computer modeling". The description of key techniques is given, such as machine learning for language modeling, speech synthesis, handwriting simulation. Results: Lingvopersonology developed some great theoretical foundations, its methods, tools, and significant achievements let us predict that the newest promising trend is a linguistic identity modeling by means of information technology, including language. We see three aspects of the modeling: 1 modeling the semantic level of linguistic identity – by means of the use of corpus linguistics; 2 sound level formal modeling of linguistic identity – with the help of speech synthesis; 3 formal graphic level modeling of linguistic identity – with the help of image synthesis (handwriting. For the first case, we suppose to use machine learning technics and vector-space (word2vec algorithm for textual speech modeling. Hybrid CUTE method for personality speech modeling will be applied to the second case. Finally, trained with the person handwriting images neural network can be an instrument for the last case. Discussion: The project "Communicative-pragmatic, discourse, and grammatical lingvopersonology: structuring linguistic identity and computer modeling", which is implementing by the Department of General and Applied Linguistics and Slavonic philology, selected a task to model Yuriy Shevelyov (Sherekh

  7. Formal Method of Description Supporting Portfolio Assessment

    Science.gov (United States)

    Morimoto, Yasuhiko; Ueno, Maomi; Kikukawa, Isao; Yokoyama, Setsuo; Miyadera, Youzou

    2006-01-01

    Teachers need to assess learner portfolios in the field of education. However, they need support in the process of designing and practicing what kind of portfolios are to be assessed. To solve the problem, a formal method of describing the relations between the lesson forms and portfolios that need to be collected and the relations between…

  8. Relative Contributions of Three Descriptive Methods: Implications for Behavioral Assessment

    Science.gov (United States)

    Pence, Sacha T.; Roscoe, Eileen M.; Bourret, Jason C.; Ahearn, William H.

    2009-01-01

    This study compared the outcomes of three descriptive analysis methods--the ABC method, the conditional probability method, and the conditional and background probability method--to each other and to the results obtained from functional analyses. Six individuals who had been diagnosed with developmental delays and exhibited problem behavior…

  9. 48 CFR 232.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 232.102 Section 232.102 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 232.102 Description of contract financing methods. (e)(2) Progress payments...

  10. 48 CFR 1432.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 1432.102 Section 1432.102 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 1432.102 Description of contract financing methods. Use of progress payments based on a percentage or stage...

  11. 48 CFR 932.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 932.102 Section 932.102 Federal Acquisition Regulations System DEPARTMENT OF ENERGY GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 932.102 Description of contract financing methods. (e)(2) Progress payments based on a percentage or stage of...

  12. 48 CFR 1532.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 1532.102 Section 1532.102 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING General 1532.102 Description of contract financing methods. Progress payments based on a percentage or stage of completion are authorized for use as...

  13. 48 CFR 432.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 432.102 Section 432.102 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 432.102 Description of contract financing methods. Progress payments based on a percentage or stage of completion are...

  14. 48 CFR 32.102 - Description of contract financing methods.

    Science.gov (United States)

    2010-10-01

    ... financing methods. 32.102 Section 32.102 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 32.102 Description of contract financing methods. (a) Advance payments are advances of money by the Government to a...

  15. Three-dimensional display techniques: description and critique of methods

    International Nuclear Information System (INIS)

    Budinger, T.F.

    1982-01-01

    The recent advances in non invasive medical imaging of 3 dimensional spatial distribution of radionuclides, X-ray attenuation coefficients, and nuclear magnetic resonance parameters necessitate development of a general method for displaying these data. The objective of this paper is to give a systematic description and comparison of known methods for displaying three dimensional data. The discussion of display methods is divided into two major categories: 1) computer-graphics methods which use a two dimensional display screen; and 2) optical methods (such as holography, stereopsis and vari-focal systems)

  16. An Apparent Descriptive Method for Judging the Synchronization of ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    So this method brings certain difficulty for judgement. Hence the author further explores how one can use a great deal of the observational data such as a1,2 sin i, m1,2 sin3 i, K1,2 and f (m) in tables of binary stars to judge synchronization of rotation of binary stars by using apparent phenomenal descriptive methods. These.

  17. Solving the Sea-Level Equation in an Explicit Time Differencing Scheme

    Science.gov (United States)

    Klemann, V.; Hagedoorn, J. M.; Thomas, M.

    2016-12-01

    In preparation of coupling the solid-earth to an ice-sheet compartment in an earth-system model, the dependency of initial topography on the ice-sheet history and viscosity structure has to be analysed. In this study, we discuss this dependency and how it influences the reconstruction of former sea level during a glacial cycle. The modelling is based on the VILMA code in which the field equations are solved in the time domain applying an explicit time-differencing scheme. The sea-level equation is solved simultaneously in the same explicit scheme as the viscoleastic field equations (Hagedoorn et al., 2007). With the assumption of only small changes, we neglect the iterative solution at each time step as suggested by e.g. Kendall et al. (2005). Nevertheless, the prediction of the initial paleo topography in case of moving coastlines remains to be iterated by repeated integration of the whole load history. The sensitivity study sketched at the beginning is accordingly motivated by the question if the iteration of the paleo topography can be replaced by a predefined one. This study is part of the German paleoclimate modelling initiative PalMod. Lit:Hagedoorn JM, Wolf D, Martinec Z, 2007. An estimate of global mean sea-level rise inferred from tide-gauge measurements using glacial-isostatic models consistent with the relative sea-level record. Pure appl. Geophys. 164: 791-818, doi:10.1007/s00024-007-0186-7Kendall RA, Mitrovica JX, Milne GA, 2005. On post-glacial sea level - II. Numerical formulation and comparative reesults on spherically symmetric models. Geophys. J. Int., 161: 679-706, doi:10.1111/j.365-246.X.2005.02553.x

  18. Erratum An Apparent Phenomenal Descriptive Method for Judging ...

    Indian Academy of Sciences (India)

    Li Lin-sen. (J. Astrophys. Astr., (2004) Vol. 25, Nos. 3 & 4, pp. 203–211). Table 1. The calculated results for synchronous parameters of twenty components in ten eclipsing binary systems by using the apparent descriptive method of formula (4). Sp. (V1,2 sin i)M. Name type. P(d) i(deg) R1,2(R⊙). (km/s). Qe,e. PR ≷ P Synch.

  19. Storytelling as an Instructional Method: Descriptions and Research Questions

    Science.gov (United States)

    2009-01-01

    computational brain . Cambridge, MA: Bradford/ MIT Press. Cianciolo, A. T., Prevou, M., Cianciolo, D., & Morris, R. (2007). Using digital storytelling to...volume 3, no. 2 (Fall 2009) 6–23 Storytelling as an Instructional Method: Descriptions and Research Questions Dee H. Andrews, Thomas D. Hull, and...Jennifer A. Donahue Abstract This paper discusses the theoretical and empirical foundations of the use of storytelling in instruction. The defi nition

  20. Descriptive and inferential statistical methods used in burns research.

    Science.gov (United States)

    Al-Benna, Sammy; Al-Ajam, Yazan; Way, Benjamin; Steinstraesser, Lars

    2010-05-01

    Burns research articles utilise a variety of descriptive and inferential methods to present and analyse data. The aim of this study was to determine the descriptive methods (e.g. mean, median, SD, range, etc.) and survey the use of inferential methods (statistical tests) used in articles in the journal Burns. This study defined its population as all original articles published in the journal Burns in 2007. Letters to the editor, brief reports, reviews, and case reports were excluded. Study characteristics, use of descriptive statistics and the number and types of statistical methods employed were evaluated. Of the 51 articles analysed, 11(22%) were randomised controlled trials, 18(35%) were cohort studies, 11(22%) were case control studies and 11(22%) were case series. The study design and objectives were defined in all articles. All articles made use of continuous and descriptive data. Inferential statistics were used in 49(96%) articles. Data dispersion was calculated by standard deviation in 30(59%). Standard error of the mean was quoted in 19(37%). The statistical software product was named in 33(65%). Of the 49 articles that used inferential statistics, the tests were named in 47(96%). The 6 most common tests used (Student's t-test (53%), analysis of variance/co-variance (33%), chi(2) test (27%), Wilcoxon & Mann-Whitney tests (22%), Fisher's exact test (12%)) accounted for the majority (72%) of statistical methods employed. A specified significance level was named in 43(88%) and the exact significance levels were reported in 28(57%). Descriptive analysis and basic statistical techniques account for most of the statistical tests reported. This information should prove useful in deciding which tests should be emphasised in educating burn care professionals. These results highlight the need for burn care professionals to have a sound understanding of basic statistics, which is crucial in interpreting and reporting data. Advice should be sought from professionals

  1. PCR IN TRAUMATOLOGY AND ORTHOPAEDICS: METHOD DESCRIPTION AND APPLICABILITY

    Directory of Open Access Journals (Sweden)

    E. M. Polyakova

    2014-01-01

    Full Text Available Review brief presents description of polymerase chain reaction method (PCR and its most common variants. Three PCR-based lines of research, carried out in the traumatology and orthopaedics, include identifying a causative agents of the implant-associated infection after orthopaedic surgery; detection of antibiotic resistance genes and biofilm forming genes. It was shown that PCR can be used as additional method for detection of genetic disorders, significant for traumatology and orthopaedics, and for investigation of cartilage and bone regeneration.

  2. A New Shape Description Method Using Angular Radial Transform

    Science.gov (United States)

    Lee, Jong-Min; Kim, Whoi-Yul

    Shape is one of the primary low-level image features in content-based image retrieval. In this paper we propose a new shape description method that consists of a rotationally invariant angular radial transform descriptor (IARTD). The IARTD is a feature vector that combines the magnitude and aligned phases of the angular radial transform (ART) coefficients. A phase correction scheme is employed to produce the aligned phase so that the IARTD is invariant to rotation. The distance between two IARTDs is defined by combining differences in the magnitudes and aligned phases. In an experiment using the MPEG-7 shape dataset, the proposed method outperforms existing methods; the average BEP of the proposed method is 57.69%, while the average BEPs of the invariant Zernike moments descriptor and the traditional ART are 41.64% and 36.51%, respectively.

  3. An object-oriented description method of EPMM process

    Science.gov (United States)

    Jiang, Zuo; Yang, Fan

    2017-06-01

    In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

  4. Optical description and design method with annularly stitched aspheric surface.

    Science.gov (United States)

    Cheng, De-Wen; Chen, Xue-Jiao; Xu, Chen; Hu, Yuan; Wang, Yong-Tian

    2015-12-01

    The relentless pressure for designs with new optical functions, small volume, and light weight has greatly increased the importance of aspheric surfaces. In this paper, we propose an annularly stitched aspheric surface (ASAS) description method to increase the freedom and flexibility of imaging system design. The rotationally symmetric ASAS consists of a circular central zone and one or more annular zones. Two neighboring zones are constrained to have the same derivatives on their joint curve, and this means the ASAS is C1 continuous. This finding is proved and verified by the mathematical deduction of the surface formulas. Two optimization strategies and two design methods with the C1 continuous constraints are also discussed. This surface can greatly facilitate the design and even achieve some previously impossible designs without increasing the fabrication difficulty. Two different systems with the proposed ASAS are optimized and the results are presented. The design results verified the practicability of the ASAS.

  5. Guidance for Methods Descriptions Used in Preclinical Imaging Papers

    Directory of Open Access Journals (Sweden)

    David Stout

    2013-10-01

    Full Text Available Preclinical molecular imaging is a rapidly growing field, where new imaging systems, methods, and biological findings are constantly being developed or discovered. Imaging systems and the associated software usually have multiple options for generating data, which is often overlooked but is essential when reporting the methods used to create and analyze data. Similarly, the ways in which animals are housed, handled, and treated to create physiologically based data must be well described in order that the findings be relevant, useful, and reproducible. There are frequently new developments for metabolic imaging methods. Thus, specific reporting requirements are difficult to establish; however, it remains essential to adequately report how the data have been collected, processed, and analyzed. To assist with future manuscript submissions, this article aims to provide guidelines of what details to report for several of the most common imaging modalities. Examples are provided in an attempt to give comprehensive, succinct descriptions of the essential items to report about the experimental process.

  6. 2D arc-PIC code description: methods and documentation

    CERN Document Server

    Timko, Helga

    2011-01-01

    Vacuum discharges are one of the main limiting factors for future linear collider designs such as that of the Compact LInear Collider. To optimize machine efficiency, maintaining the highest feasible accelerating gradient below a certain breakdown rate is desirable; understanding breakdowns can therefore help us to achieve this goal. As a part of ongoing theoretical research on vacuum discharges at the Helsinki Institute of Physics, the build-up of plasma can be investigated through the particle-in-cell method. For this purpose, we have developed the 2D Arc-PIC code introduced here. We present an exhaustive description of the 2D Arc-PIC code in two parts. In the first part, we introduce the particle-in-cell method in general and detail the techniques used in the code. In the second part, we provide a documentation and derivation of the key equations occurring in the code. The code is original work of the author, written in 2010, and is therefore under the copyright of the author. The development of the code h...

  7. Homogenized description and retrieval method of nonlinear metasurfaces

    Science.gov (United States)

    Liu, Xiaojun; Larouche, Stéphane; Smith, David R.

    2018-03-01

    A patterned, plasmonic metasurface can strongly scatter incident light, functioning as an extremely low-profile lens, filter, reflector or other optical device. When the metasurface is patterned uniformly, its linear optical properties can be expressed using effective surface electric and magnetic polarizabilities obtained through a homogenization procedure. The homogenized description of a nonlinear metasurface, however, presents challenges both because of the inherent anisotropy of the medium as well as the much larger set of potential wave interactions available, making it challenging to assign effective nonlinear parameters to the otherwise inhomogeneous layer of metamaterial elements. Here we show that a homogenization procedure can be developed to describe nonlinear metasurfaces, which derive their nonlinear response from the enhanced local fields arising within the structured plasmonic elements. With the proposed homogenization procedure, we are able to assign effective nonlinear surface polarization densities to a nonlinear metasurface, and link these densities to the effective nonlinear surface susceptibilities and averaged macroscopic pumping fields across the metasurface. These effective nonlinear surface polarization densities are further linked to macroscopic nonlinear fields through the generalized sheet transition conditions (GSTCs). By inverting the GSTCs, the effective nonlinear surface susceptibilities of the metasurfaces can be solved for, leading to a generalized retrieval method for nonlinear metasurfaces. The application of the homogenization procedure and the GSTCs are demonstrated by retrieving the nonlinear susceptibilities of a SiO2 nonlinear slab. As an example, we investigate a nonlinear metasurface which presents nonlinear magnetoelectric coupling in near infrared regime. The method is expected to apply to any patterned metasurface whose thickness is much smaller than the wavelengths of operation, with inclusions of arbitrary geometry

  8. Model of Team Organization and Behavior and Team Description Method

    Science.gov (United States)

    1984-10-01

    PERFORMING ORG& REPORT’ NUMBER 7.AUTHIOR(&) 0. CONTRACT OR GRANT NUMOSR(ej J. Thomas Roth Rohn J. Hritz HDA 903-81-C-0198: VEa Donald W. McGill 9...team descriptions are included, acid procedures for data recording are provided. 4q-4 4 iv, G OP S• . . • ,," $1 . . ’ __ _ _ _ ’ / . • , Utilization...Listing of thi! number acid identification of the roles adopted by team members in the actual team structure, along with KOS and primary equipment

  9. Project JADE. Description of the MLH-method

    International Nuclear Information System (INIS)

    Sandstedt, H.; Munier, R.; Wichmann, C.; Isaksson, Therese

    2001-08-01

    This report constitutes a part of a series of reports within project JADE, comparison of deposition methods. A comparison of the deposition methods MLH (Medium Long Holes with approximately 25 copper canisters emplaced in a horizontal deposition hole about 200 metres in length bored between central and side tunnels) and KBS-3 (copper canisters are emplaced in vertical deposition holes bored in the floors of horizontal tunnels) has earlier been performed and KBS-3 was judged to be more advantageous than MLH. However, the prerequisites for the comparison have changed with time and an updated evaluation of MLH was therefore required. In this report, the current knowledge of MLH is summarized with focus on geological prerequisites, methods for boring long, horizontal deposition holes, reinforcement and sealing, deposition and cost. Comparisons with KBS-3 are performed sequentially. An MLH-repository is judged to be more sensitive to ingress of water to the deposition holes during the deposition process. This implies that a MLH repository based on today's knowledge is basically recommended for bedrock with fairly low water baring capacity. It has been demonstrated that MLH has considerable economic potential compared to KBS-3. However, the method is judged to be more technically immature than KBS-3. Particularly, methods and equipment for deposition of canisters need to be developed further. Methods and equipment for deposition can be developed, which fulfill the demands on function and safety, in the near future. MLH cannot therefore be rejected as deposition method

  10. Genetic analysis of bulimia nervosa: methods and sample description.

    Science.gov (United States)

    Kaye, Walter H; Devlin, Bernie; Barbarich, Nicole; Bulik, Cynthia M; Thornton, Laura; Bacanu, Silviu-Alin; Fichter, Manfred M; Halmi, Katherine A; Kaplan, Allan S; Strober, Michael; Woodside, D Blake; Bergen, Andrew W; Crow, Scott; Mitchell, James; Rotondo, Alessandro; Mauri, Mauro; Cassano, Giovanni; Keel, Pamela; Plotnicov, Katherine; Pollice, Christine; Klump, Kelly L; Lilenfeld, Lisa R; Ganjei, J Kelly; Quadflieg, Norbert; Berrettini, Wade H

    2004-05-01

    Twin and family studies suggest that genetic variants contribute to the pathogenesis of bulimia nervosa (BN) and anorexia nervosa (AN). The Price Foundation has supported an international, multisite study of families with these disorders to identify these genetic variations. The current study presents the clinical characteristics of this sample as well as a description of the study methodology. All probands met modified criteria for BN or bulimia nervosa with a history of AN (BAN) as defined in the 4th ed. of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric Association, 1994). All affected relatives met DSM-IV criteria for BN, AN, BAN, or eating disorders not otherwise specified (EDNOS). Probands and affected relatives were assessed diagnostically using both trained-rater and self-report assessments. DNA samples were collected from probands, affected relatives, and available biologic parents. Assessments were obtained from 163 BN probands and 165 BAN probands. Overall, there were 365 relative pairs available for linkage analysis. Of the affected relatives of BN probands, 62 were diagnosed as BN (34.8%), 49 as BAN (27.5%), 35 as AN (19.7%), and 32 as EDNOS (18.0%). For the relatives of BAN probands, 42 were diagnosed as BN (22.5%), 67 as BAN (35.8%), 48 as AN (25.7%), and 30 as EDNOS (16.0%). This study represents the largest genetic study of eating disorders to date. Clinical data indicate that although there are a large number of individuals with BN disorders, a range of eating pathology is represented in the sample, allowing for the examination of several different phenotypes in molecular genetic analyses. Copyright 2004 by Wiley Periodicals, Inc. Int J Eat Disord 35: 556-570, 2004.

  11. Stress description model by non destructive magnetic methods

    International Nuclear Information System (INIS)

    Flambard, C.; Grossiord, J.L.; Tourrenc, P.

    1983-01-01

    Since a few years, CETIM investigates analysis possibilities of materials, by developing a method founded on observation of ferromagnetic noise. By experiments, correlations have become obvious between state of the material and recorded signal. These correlations open to industrial applications to measure stresses and strains in elastic and plastic ranges. This article starts with a brief historical account and theoretical backgrounds of the method. The experimental frame of this research is described, and the main results are analyzed. Theoretically, a model was built up, and we present it. It seems in agreement with some experimental observations. The main results concerning stress application, thermal and surface treatments (decarbonizing) are presented [fr

  12. Multiple predictor smoothing methods for sensitivity analysis: Description of techniques

    International Nuclear Information System (INIS)

    Storlie, Curtis B.; Helton, Jon C.

    2008-01-01

    The use of multiple predictor smoothing methods in sampling-based sensitivity analyses of complex models is investigated. Specifically, sensitivity analysis procedures based on smoothing methods employing the stepwise application of the following nonparametric regression techniques are described: (i) locally weighted regression (LOESS), (ii) additive models, (iii) projection pursuit regression, and (iv) recursive partitioning regression. Then, in the second and concluding part of this presentation, the indicated procedures are illustrated with both simple test problems and results from a performance assessment for a radioactive waste disposal facility (i.e., the Waste Isolation Pilot Plant). As shown by the example illustrations, the use of smoothing procedures based on nonparametric regression techniques can yield more informative sensitivity analysis results than can be obtained with more traditional sensitivity analysis procedures based on linear regression, rank regression or quadratic regression when nonlinear relationships between model inputs and model predictions are present

  13. Gastrin radioimmunoassay. Description and application of a novel method

    International Nuclear Information System (INIS)

    Nemeth, J.; Jakab, B.; Schweibert, I.; Szolcsanyi, J.; Oroszi, G.; Szilvassy, Z.

    2002-01-01

    Development and application of a novel gastrin radioimmunoassay (RIA) are described. 125 I-labeling of non-sulphated human gastrin-17 (nshG-17) was performed by the iodogen method and the mono-iodinated hormone, as RIA tracer, was separated by reversed-phase high performance liquid chromatography (HPLC). Serum gastrin levels were measured in response to intravenous application of isoproterenol, a non-selective beta and phenylephrine, a selective alpha-1 receptor agonist using a newly developed method specific for the C-terminal part of the hormone in rats. Isoproterenol at clinically relevant doses elicited a significant increase in serum gastrin concentration in a dose-dependent fashion, whereas phenylephrine was without effect. (author)

  14. Description of a method for computing fluid-structure interaction

    International Nuclear Information System (INIS)

    Gantenbein, F.

    1982-02-01

    A general formulation allowing computation of structure vibrations in a dense fluid is described. It is based on fluid modelisation by fluid finite elements. For each fluid node are associated two variables: the pressure p and a variable π defined as p=d 2 π/dt 2 . Coupling between structure and fluid is introduced by surface elements. This method is easy to introduce in a general finite element code. Validation was obtained by analytical calculus and tests. It is widely used for vibrational and seismic studies of pipes and internals of nuclear reactors some applications are presented [fr

  15. Implicit Methods for the Magnetohydrodynamic Description of Magnetically Confined Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Jardin, S C

    2010-09-28

    Implicit algorithms are essential for predicting the slow growth and saturation of global instabilities in today’s magnetically confined fusion plasma experiments. Present day algorithms for obtaining implicit solutions to the magnetohydrodynamic (MHD) equations for highly magnetized plasma have their roots in algorithms used in the 1960s and 1970s. However, today’s computers and modern linear and non-linear solver techniques make practical much more comprehensive implicit algorithms than were previously possible. Combining these advanced implicit algorithms with highly accurate spatial representations of the vector fields describing the plasma flow and magnetic fields and with improved methods of calculating anisotropic thermal conduction now makes possible simulations of fusion experiments using realistic values of plasma parameters and actual configuration geometry.

  16. Implicit Methods for the Magnetohydrodynamic Description of Magnetically Confined Plasmas

    International Nuclear Information System (INIS)

    Jardin, S.C.

    2010-01-01

    Implicit algorithms are essential for predicting the slow growth and saturation of global instabilities in today's magnetically confined fusion plasma experiments. Present day algorithms for obtaining implicit solutions to the magnetohydrodynamic (MHD) equations for highly magnetized plasma have their roots in algorithms used in the 1960s and 1970s. However, today's computers and modern linear and non-linear solver techniques make practical much more comprehensive implicit algorithms than were previously possible. Combining these advanced implicit algorithms with highly accurate spatial representations of the vector fields describing the plasma flow and magnetic fields and with improved methods of calculating anisotropic thermal conduction now makes possible simulations of fusion experiments using realistic values of plasma parameters and actual configuration geometry.

  17. Descriptive study of the Socratic method: evidence for verbal shaping.

    Science.gov (United States)

    Calero-Elvira, Ana; Froján-Parga, María Xesús; Ruiz-Sancho, Elena María; Alpañés-Freitag, Manuel

    2013-12-01

    In this study we analyzed 65 fragments of session recordings in which a cognitive behavioral therapist employed the Socratic method with her patients. Specialized coding instruments were used to categorize the verbal behavior of the psychologist and the patients. First the fragments were classified as more or less successful depending on the overall degree of concordance between the patient's verbal behavior and the therapeutic objectives. Then the fragments were submitted to sequential analysis so as to discover regularities linking the patient's verbal behavior and the therapist's responses to it. Important differences between the more and the less successful fragments involved the therapist's approval or disapproval of verbalizations that approximated therapeutic goals. These approvals and disapprovals were associated with increases and decreases, respectively, in the patient's behavior. These results are consistent with the existence, in this particular case, of a process of shaping through which the therapist modifies the patient's verbal behavior in the overall direction of his or her chosen therapeutic objectives. © 2013.

  18. FURNACE; a toroidal geometry neutronic program system method description and users manual

    International Nuclear Information System (INIS)

    Verschuur, K.A.

    1984-12-01

    The FURNACE program system performs neutronic and photonic calculations in 3D toroidal geometry for application to fusion reactors. The geometry description is quite general, allowing any torus cross section and any neutron source density distribution for the plasma, as well as simple parametric representations of circular, elliptic and D-shaped tori and plasmas. The numerical method is based on an approximate transport model that produces results with sufficient accuracy for reactor-design purposes, at acceptable calculational costs. A short description is given of the numerical method, and a user manual for the programs of the system: FURNACE, ANISN-PT, LIBRA, TAPEMA and DRAWER is presented

  19. A Method for Transforming Existing Web Service Descriptions into an Enhanced Semantic Web Service Framework

    Science.gov (United States)

    Du, Xiaofeng; Song, William; Munro, Malcolm

    Web Services as a new distributed system technology has been widely adopted by industries in the areas, such as enterprise application integration (EAI), business process management (BPM), and virtual organisation (VO). However, lack of semantics in the current Web Service standards has been a major barrier in service discovery and composition. In this chapter, we propose an enhanced context-based semantic service description framework (CbSSDF+) that tackles the problem and improves the flexibility of service discovery and the correctness of generated composite services. We also provide an agile transformation method to demonstrate how the various formats of Web Service descriptions on the Web can be managed and renovated step by step into CbSSDF+ based service description without large amount of engineering work. At the end of the chapter, we evaluate the applicability of the transformation method and the effectiveness of CbSSDF+ through a series of experiments.

  20. Description of symmetry of magnetic structures by representations of space groups. [Tables, projecton operator methods

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W

    1974-10-15

    A description of magnetic structures based on the use of representations of space groups is given. Representations of the space groups were established for each compound on the basis of experimental data by the method of projection operators. The compounds contained in the list are collected according to crystal systems, alphabetically within each system. The description of each compound consists of the four parts. The first part contain the chemical symbol of the compound, the second its space group. The next part contains the chemical symbol of the magnetic atom and its positions in Wychoff notation with the number of equivalent positions in the crystal unit cell. The main description of a compound magnetic structure is given in the fourth part. It contains: K vector defined in the reciprocal space, the representation according to which a magnetic structure is transformed and the axial vector function S which describes the magnetic structure.

  1. Sleep Spindles as an Electrographic Element: Description and Automatic Detection Methods

    Directory of Open Access Journals (Sweden)

    Dorothée Coppieters ’t Wallant

    2016-01-01

    Full Text Available Sleep spindle is a peculiar oscillatory brain pattern which has been associated with a number of sleep (isolation from exteroceptive stimuli, memory consolidation and individual characteristics (intellectual quotient. Oddly enough, the definition of a spindle is both incomplete and restrictive. In consequence, there is no consensus about how to detect spindles. Visual scoring is cumbersome and user dependent. To analyze spindle activity in a more robust way, automatic sleep spindle detection methods are essential. Various algorithms were developed, depending on individual research interest, which hampers direct comparisons and meta-analyses. In this review, sleep spindle is first defined physically and topographically. From this general description, we tentatively extract the main characteristics to be detected and analyzed. A nonexhaustive list of automatic spindle detection methods is provided along with a description of their main processing principles. Finally, we propose a technique to assess the detection methods in a robust and comparable way.

  2. THE USE OF PAIR COMPOSITION METHOD ON STUDENTS’ DESCRIPTIVE WRITING SKILL

    Directory of Open Access Journals (Sweden)

    Maya Nurmayanti

    2014-06-01

    Full Text Available This research was aimed to find out roles of pair composition method on students’ behaviour in learning processes and their writing assessment, and also to find out students’ attitude toward learning process of pair composition method in writing descriptive text in the classroom. Descriptive qualitative method was used in this research. The participants were 33 students of X grade of Senior High School. The data were collected from observation, the result of analysis showed that 66% of the seriousness of students during learning process was high, 78% of enthusiasm of students in doing task was high, and 58% of students’ participation was high. The increasing of students’ assessment was 18,7 from the average score before. The data collected from interview and questionnaire indicated that pair composition method provided the opportunities for sharing ideas, developing text, corresting writing errors, motivating students being active, and 50% students strongly agreed that pair composition method on writing descriptive text was lively and enjoyable.

  3. Tabular method of critical heat flux description in square packing rod bundles

    International Nuclear Information System (INIS)

    Bobkov, V.P.; Smogalev, I.P.

    2003-01-01

    Elaborations of harnessing tabular method for the description and calculation of critical heat fluxes in square packing rod bundles are presented. The tabular method for fuel rod triangular assemblies derived from using basic table for critical heat fluxes in triangular fuel assemblies demonstrates good results. For the harnessing tabular method in square packing rod bundles correction functions reflecting specific geometry were found. Comparative evaluations of calculated values for the critical heat fluxes with experimental ones are presented. Good agreement of calculations with experiments is noted in all range of parameters [ru

  4. The analogy method for the description of external characteristic of inner combustion engines

    Directory of Open Access Journals (Sweden)

    A. Stonys

    2004-10-01

    Full Text Available The original data for the evaluation of vehicle motion dynamics is external characteristic of its engine, which consists of three parameters: torque, power and specific fuel consumption. It is very important to have the dependences of these characteristics on revs for various engine load cases, creating a vehicle model under real motion conditions. Load cases are defined by a load coefficient. Car-makers usually don’t declare full engine external characteristics, which overtake all load coefficient variation interval. The purpose of this article is to research, how to get full description of engine torque function without its full data. The analogy method, which is used in polymers and composites mechanics, was employed for the description of a torque function. The method is based on the creation of summarized characteristic, making horizontal and vertical shifts of torque dependences. From the curve it is possible to get a proper characteristic at a chosen load coefficient.

  5. Supervised segmentation of phenotype descriptions for the human skeletal phenome using hybrid methods

    Directory of Open Access Journals (Sweden)

    Groza Tudor

    2012-10-01

    Full Text Available Abstract Background Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. In order to fully capture the intrinsic value and knowledge expressed within them, we need to take advantage of their inner structure, which implicitly combines qualities and anatomical entities. The first step in this process is the segmentation of the phenotype descriptions into their atomic elements. Results We present a two-phase hybrid segmentation method that combines a series individual classifiers using different aggregation schemes (set operations and simple majority voting. The approach is tested on a corpus comprised of skeletal phenotype descriptions emerged from the Human Phenotype Ontology. Experimental results show that the best hybrid method achieves an F-Score of 97.05% in the first phase and F-Scores of 97.16% / 94.50% in the second phase. Conclusions The performance of the initial segmentation of anatomical entities and qualities (phase I is not affected by the presence / absence of external resources, such as domain dictionaries. From a generic perspective, hybrid methods may not always improve the segmentation accuracy as they are heavily dependent on the goal and data characteristics.

  6. Supervised segmentation of phenotype descriptions for the human skeletal phenome using hybrid methods.

    Science.gov (United States)

    Groza, Tudor; Hunter, Jane; Zankl, Andreas

    2012-10-15

    Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. In order to fully capture the intrinsic value and knowledge expressed within them, we need to take advantage of their inner structure, which implicitly combines qualities and anatomical entities. The first step in this process is the segmentation of the phenotype descriptions into their atomic elements. We present a two-phase hybrid segmentation method that combines a series individual classifiers using different aggregation schemes (set operations and simple majority voting). The approach is tested on a corpus comprised of skeletal phenotype descriptions emerged from the Human Phenotype Ontology. Experimental results show that the best hybrid method achieves an F-Score of 97.05% in the first phase and F-Scores of 97.16% / 94.50% in the second phase. The performance of the initial segmentation of anatomical entities and qualities (phase I) is not affected by the presence / absence of external resources, such as domain dictionaries. From a generic perspective, hybrid methods may not always improve the segmentation accuracy as they are heavily dependent on the goal and data characteristics.

  7. Understanding common statistical methods, Part I: descriptive methods, probability, and continuous data.

    Science.gov (United States)

    Skinner, Carl G; Patel, Manish M; Thomas, Jerry D; Miller, Michael A

    2011-01-01

    Statistical methods are pervasive in medical research and general medical literature. Understanding general statistical concepts will enhance our ability to critically appraise the current literature and ultimately improve the delivery of patient care. This article intends to provide an overview of the common statistical methods relevant to medicine.

  8. From Matched Spatial Filtering towards the Fused Statistical Descriptive Regularization Method for Enhanced Radar Imaging

    Directory of Open Access Journals (Sweden)

    Shkvarko Yuriy

    2006-01-01

    Full Text Available We address a new approach to solve the ill-posed nonlinear inverse problem of high-resolution numerical reconstruction of the spatial spectrum pattern (SSP of the backscattered wavefield sources distributed over the remotely sensed scene. An array or synthesized array radar (SAR that employs digital data signal processing is considered. By exploiting the idea of combining the statistical minimum risk estimation paradigm with numerical descriptive regularization techniques, we address a new fused statistical descriptive regularization (SDR strategy for enhanced radar imaging. Pursuing such an approach, we establish a family of the SDR-related SSP estimators, that encompass a manifold of existing beamforming techniques ranging from traditional matched filter to robust and adaptive spatial filtering, and minimum variance methods.

  9. Efficiency of Picture Description and Storytelling Methods in Language Sampling According to the Mean Length of Utterance Index

    Directory of Open Access Journals (Sweden)

    Salime Jafari

    2012-10-01

    Full Text Available Background and Aim: Due to limitation of standardized tests for Persian-speakers with language disorders, spontaneous language sampling collection is an important part of assessment of languageprotocol. Therefore, selection of a language sampling method, which will provide information of linguistic competence in a short time, is important. Therefore, in this study, we compared the languagesamples elicited with picture description and storytelling methods in order to determine the effectiveness of the two methods.Methods: In this study 30 first-grade elementary school girls were selected with simple sampling. To investigate picture description method, we used two illustrated stories with four pictures. Languagesamples were collected through storytelling by telling a famous children’s story. To determine the effectiveness of these two methods the two indices of duration of sampling and mean length ofutterance (MLU were compared.Results: There was no significant difference between MLU in description and storytelling methods(p>0.05. However, duration of sampling was shorter in the picture description method than the storytelling method (p<0.05.Conclusion: Findings show that, the two methods of picture description and storytelling have the same potential in language sampling. Since, picture description method can provide language samples with the same complexity in a shorter time than storytelling, it can be used as a beneficial method forclinical purposes.

  10. Fluctuating local field method probed for a description of small classical correlated lattices

    Science.gov (United States)

    Rubtsov, Alexey N.

    2018-05-01

    Thermal-equilibrated finite classical lattices are considered as a minimal model of the systems showing an interplay between low-energy collective fluctuations and single-site degrees of freedom. Standard local field approach, as well as classical limit of the bosonic DMFT method, do not provide a satisfactory description of Ising and Heisenberg small lattices subjected to an external polarizing field. We show that a dramatic improvement can be achieved within a simple approach, in which the local field appears to be a fluctuating quantity related to the low-energy degree(s) of freedom.

  11. Description of JNC's analytical method and its performance for FBR cores

    International Nuclear Information System (INIS)

    Ishikawa, M.

    2000-01-01

    The description of JNC's analytical method and its performance for FBR cores includes: an outline of JNC's Analytical System Compared with ERANOS; a standard data base for FBR Nuclear Design in JNC; JUPITER Critical Experiment; details of Analytical Method and Its Effects on JUPITER; performance of JNC Analytical System (effective multiplication factor k eff , control rod worth, and sodium void reactivity); design accuracy of a 600 MWe-class FBR Core. JNC developed a consistent analytical system for FBR core evaluation, based on JENDL library, f-table method, and three dimensional diffusion/transport theory, which includes comprehensive sensitivity tools to improve the prediction accuracy of core parameters. JNC system was verified by analysis of JUPITER critical experiment, and other facilities. Its performance can be judged quite satisfactory for FBR-core design work, though there is room for further improvement, such as more detailed treatment of cross-section resonance regions

  12. Allowable residual contamination levels for decommissioning. Part 1. A description of the method

    International Nuclear Information System (INIS)

    Napier, B.A.; Kennedy, W.E. Jr.

    1984-10-01

    This paper contains a description of the methods used in a study sponsored by UNC Nuclear Industries to determine Allowable Residual Contamination Levels (ARCL) for decommissioning facilities in the 100 Areas of the Hanford Site. The ARCL method is based on a scenario/exposure-pathway analysis and compliance with an annual dose limit for three specific modes of future use of the land and facilities. Thes modes of use are restricted, controlled, and unrestricted. The information on ARCL values for restricted and controlled use is intended to permit a full consideration of decommissioning alternatives. The analysis results in site-specific ARCL values that can be used for determining compliance with any annual dose limit selected. This flexibility permits proper consideration of field situations involving the radionuclide mixtures and physical conditions encountered. In addition, this method permits a full determination of as low as reasonably achievable (ALARA) conditions

  13. A structured hazard analysis and risk assessment method for automotive systems—A descriptive study

    International Nuclear Information System (INIS)

    Beckers, Kristian; Holling, Dominik; Côté, Isabelle; Hatebur, Denis

    2017-01-01

    The 2011 release of the first version of the ISO 26262 standard for automotive systems demand the elicitation of safety goals following a rigorous method for hazard and risk analysis. Companies are struggling with the adoption of the standard due to ambiguities, documentation demands and the alignment of the standards demands to existing processes. We previously proposed a structured engineering method to deal with these problems developed in applying action research together with an OEM. In this work, we evaluate how applicable the method is for junior automotive software engineers by a descriptive study. We provided the method to 8 members of the master course Automotive Software Engineering (ASE) at the Technical University Munich. The participants have each been working in the automotive industry for 1–4 years in parallel to their studies. We investigated their application of our method to an electronic steering column lock system. The participants applied our method in a first round alone and afterwards discussed their results in groups. Our data analysis revealed that the participants could apply the method successfully and the hazard analysis and risk assessment achieved a high precision and productivity. Moreover, the precision could be improved significantly during group discussions.

  14. A calibration method for fringe reflection technique based on the analytical phase-slope description

    Science.gov (United States)

    Wu, Yuxiang; Yue, Huimin; Pan, Zhipeng; Liu, Yong

    2018-05-01

    The fringe reflection technique (FRT) has been one of the most popular methods to measure the shape of specular surface these years. The existing system calibration methods of FRT usually contain two parts, which are camera calibration and geometric calibration. In geometric calibration, the liquid crystal display (LCD) screen position calibration is one of the most difficult steps among all the calibration procedures, and its accuracy is affected by the factors such as the imaging aberration, the plane mirror flatness, and LCD screen pixel size accuracy. In this paper, based on the deduction of FRT analytical phase-slope description, we present a novel calibration method with no requirement to calibrate the position of LCD screen. On the other hand, the system can be arbitrarily arranged, and the imaging system can either be telecentric or non-telecentric. In our experiment of measuring the 5000mm radius sphere mirror, the proposed calibration method achieves 2.5 times smaller measurement error than the geometric calibration method. In the wafer surface measuring experiment, the measurement result with the proposed calibration method is closer to the interferometer result than the geometric calibration method.

  15. The method of moments and its application to the description of liquid He4

    International Nuclear Information System (INIS)

    Parlinski, K.

    1974-01-01

    The method of moments used to calculate the time dependent correlation functions is discussed. To reconstruct the approximate correlation function the finite number of the moments of a given function is needed. Every such approximation is an exact solution of the problem described by some model Hamiltonian. The formulae for any order of the approximation are given. Also described is another way of using the moments, which relies on the expansion of the Fourier transform of the correlation function into the series of the Hermitian polynomials, the coefficient of which are combinations of the moments. The method of moments was applied to the description of liquid He 4 which is at absolute zero temperature. The calculated moments of the density-density correlation function were applied to the description of the experimentally observed oscillations of width and average energy of the distribution of neutrons scattered by liquid helium as a function of the wave vector greater than 2 Angstroem -1 . Good agreement between the calculated and experimentally observed oscillations was obtained. It was also shown that the dynamics structure factor is highly asymmetrical. Using the calculated moments of the velocity-velocity correlation function, the expansion coefficients of the incoherent, double differential scattering cross-section into the series over the inverse wave vector were found up to the term of third order. The coefficients of this expansion do not depend explicitly on the relative particle occupation fraction of the zero-momentum state, i.e. the condensate. This expansion describes well the expermentally observed distributions of scattered neutrons for the wave vector 14.33 Angstroem -1 . The obtained results indicate that the inelastic neutron scattering method for high momentum transfers cannot be used as a straightforward method of measuring the relative occupation number of the zero-momentum state. The methods of elaboration of neutron scattering results at

  16. Research methods in nursing students' Bachelor's theses in Sweden: A descriptive study.

    Science.gov (United States)

    Johansson, Linda; Silén, Marit

    2018-07-01

    During the nursing programme in Sweden, students complete an independent project that allows them to receive both a professional qualification as a nurse and a Bachelor's degree. This project gives students the opportunity to develop and apply skills such as critical thinking, problem-solving and decision-making, thus preparing them for their future work. However, only a few, small-scale studies have analysed the independent project to gain more insight into how nursing students carry out this task. The aim of the present study was to describe the methods, including ethical considerations and assessment of data quality, applied in nursing students' independent Bachelor's degree projects in a Swedish context. A descriptive study with a quantitative approach. A total of 490 independent projects were analysed using descriptive statistics. Literature reviews were the predominant project form. References were often used to support the analysis method. They were not, however, always relevant to the method. This was also true of ethical considerations. When a qualitative approach was used, and data collected through interviews, the participants were typically professionals. In qualitative projects involving analysis of biographies/autobiographies or blogs participants were either persons with a disease or next of kin of a person with a disease. Although most of the projects were literature reviews, it seemed unclear to the nursing students how the data should be analysed as well as what ethical issues should be raised in relation to the method. Consequently, further research and guidance are needed. In Sweden, independent projects are not considered research and are therefore not required to undergo ethics vetting. However, it is important that they be designed so as to avoid possible research ethics problems. Asking persons about their health, which occurred in some of the empirical projects, may therefore be considered questionable. Copyright © 2018 Elsevier Ltd. All

  17. Description logic-based methods for auditing frame-based medical terminological systems.

    Science.gov (United States)

    Cornet, Ronald; Abu-Hanna, Ameen

    2005-07-01

    Medical terminological systems (TSs) play an increasingly important role in health care by supporting recording, retrieval and analysis of patient information. As the size and complexity of TSs are growing, the need arises for means to audit them, i.e. verify and maintain (logical) consistency and (semantic) correctness of their contents. This is not only important for the management of TSs but also for providing their users with confidence about the reliability of their contents. Formal methods have the potential to play an important role in the audit of TSs, although there are few empirical studies to assess the benefits of using these methods. In this paper we propose a method based on description logics (DLs) for the audit of TSs. This method is based on the migration of the medical TS from a frame-based representation to a DL-based one. Our method is characterized by a process in which initially stringent assumptions are made about concept definitions. The assumptions allow the detection of concepts and relations that might comprise a source of logical inconsistency. If the assumptions hold then definitions are to be altered to eliminate the inconsistency, otherwise the assumptions are revised. In order to demonstrate the utility of the approach in a real-world case study we audit a TS in the intensive care domain and discuss decisions pertaining to building DL-based representations. This case study demonstrates that certain types of inconsistencies can indeed be detected by applying the method to a medical terminological system. The added value of the method described in this paper is that it provides a means to evaluate the compliance to a number of common modeling principles in a formal manner. The proposed method reveals potential modeling inconsistencies, helping to audit and (if possible) improve the medical TS. In this way, it contributes to providing confidence in the contents of the terminological system.

  18. Description of the atomic disorder (local order) in crystals by the mixed-symmetry method

    Science.gov (United States)

    Dudka, A. P.; Novikova, N. E.

    2017-11-01

    An approach to the description of local atomic disorder (short-range order) in single crystals by the mixed-symmetry method based on Bragg scattering data is proposed, and the corresponding software is developed. In defect-containing crystals, each atom in the unit cell can be described by its own symmetry space group. The expression for the calculated structural factor includes summation over different sets of symmetry operations for different atoms. To facilitate the search for new symmetry elements, an "atomic disorder expert" was developed, which estimates the significance of tested models. It is shown that the symmetry lowering for some atoms correlates with the existence of phase transitions (in langasite family crystals) and the anisotropy of physical properties (in rare-earth dodecaborides RB12).

  19. Description of two-proton radioactivity by the methods of the quantum theory of ternary fission

    International Nuclear Information System (INIS)

    Kadmenskij, S.G.

    2005-01-01

    Two-proton decay of spherical nuclei has been investigated on the base of the formalism of quantum mechanical theory of ternary fission. The suggested method of construction of partial two-proton-decay-width amplitudes and of asymptotics of the decaying nucleus wave functions allows to solve a problem of two-proton radioactivity description without the traditionally used in R-matrix approaches laborious sewing procedure for internal and external parent nucleus wave functions in three-body scheme. In the frame of diagonal approximation, the wave-function structure for Cooper pair of two emitted protons in parent nucleus was analyzed as well as the behavior of the wave function describing potential scattering of two-proton-decay products with taking into account decay channel coupling and properties of interaction potentials between these products [ru

  20. Description of odd-mass nuclei by multi-reference energy density functional methods

    International Nuclear Information System (INIS)

    Bally, B.

    2014-01-01

    In this work, we are interested in the treatment of odd-mass atomic nuclei in energy density functional (EDF) models. More precisely, the goal of this thesis is to develop and to apply to odd-mass nuclei, the theoretical extensions of the EDF method that are: first, the projection technique, and secondly the configuration mixing by the generator coordinate method (GCM). These two extensions are part of the so-called multi-reference energy density functional (MR-EDF) formalism and allow one to take into account, within an EDF context, the 'beyond-mean-field' correlations between the nucleons forming the nucleus. Until now, the MR-EDF formalism has been applied, in its fully-fledged version, only to the calculation of even-even nuclei. In this thesis, we want to demonstrate the applicability of such a model also for the description of odd-mass nuclei. In the first part of this thesis, we describe the theoretical formalism of the EDF models, giving particular attention to the treatment of symmetries within our approach. In the second part of the manuscript, we apply our model to the nucleus 25 Mg and investigate different aspects of the method (e.g. numerical accuracy, convergence of the configuration mixing, comparison to known experimental data). The results obtained in this work are encouraging and demonstrate the potential of our approach for theoretical nuclear structure calculations. (author)

  1. Transport-level description of the 252Cf-source method using the Langevin technique

    International Nuclear Information System (INIS)

    Stolle, A.M.; Akcasu, A.Z.

    1991-01-01

    The fluctuations in the neutron number density and detector outputs in a nuclear reactor can be analyzed conveniently by using the Langevin equation approach. This approach can be implemented at any level of approximation to describe the time evolution of the neutron population, from the most complete transport-level description to the very basic point reactor analysis of neutron number density fluctuations. In this summary, the complete space- and velocity-dependent transport-level formulation of the Langevin equation approach is applied to the analysis of the 252 Cf-source-driven noise analysis (CSDNA) method, an experimental technique developed by J.T. Mihalczo at Oak Ridge National Laboratory, which makes use of noise analysis to determine the reactivity of subcritical media. From this analysis, a theoretical expression for the subcritical multiplication factor is obtained that can then be used to interpret the experimental data. Results at the transport level are in complete agreement with an independent derivation performed by Sutton and Doub, who used the probability density method to interpret the CSDNA experiment, but differed from other expressions that have appeared in the literature

  2. Asymptotic description of plasma turbulence: Krylov-Bogoliubov methods and quasi-particles

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Bertrand, P.; Decyk, V.K.

    2001-01-01

    The asymptotic theory of charged particle motion in electromagnetic fields is developed for the general case of finite Larmor-radius effects by means of Krylov-Bogoliubov averaging method. The correspondence between the general asymptotic methods, elaborated by M. Krylov and M.Bogoliubov, the quasi-particle description and gyrokinetics is established. Such a comparison is used to shed more light on the physical sense of the reduced Poisson equation, introduced in gyrokinetics, and the particle polarization drift. It is shown that the modification of the Poisson equation in the asymptotic theory is due to the non-conservation of the magnetic moment and gyrophase trembling. it is shown that the second-order modification of the adiabatic invariant can determine the conditions of global plasma stability and introduces new nonlinear terms into the reduced Poisson equation. Such a modification is important for several plasma orderings, e.g. NHD type ordering. The feasibility of numerical simulation schemes in which the polarization drift is included into the quasi-particle equations of motion, and the Poisson equation remains unchanged is analyzed. A consistent asymptotic model is proposed in which the polarization drift is included into the quasi-particle equations of motion and the particle and quasi-particle velocities are equal. It is shown that in such models there are additional modifications of the reduced Poisson equation. The latter becomes even more complicated in contrast to earlier suggestions

  3. Faults Classification Of Power Electronic Circuits Based On A Support Vector Data Description Method

    Directory of Open Access Journals (Sweden)

    Cui Jiang

    2015-06-01

    Full Text Available Power electronic circuits (PECs are prone to various failures, whose classification is of paramount importance. This paper presents a data-driven based fault diagnosis technique, which employs a support vector data description (SVDD method to perform fault classification of PECs. In the presented method, fault signals (e.g. currents, voltages, etc. are collected from accessible nodes of circuits, and then signal processing techniques (e.g. Fourier analysis, wavelet transform, etc. are adopted to extract feature samples, which are subsequently used to perform offline machine learning. Finally, the SVDD classifier is used to implement fault classification task. However, in some cases, the conventional SVDD cannot achieve good classification performance, because this classifier may generate some so-called refusal areas (RAs, and in our design these RAs are resolved with the one-against-one support vector machine (SVM classifier. The obtained experiment results from simulated and actual circuits demonstrate that the improved SVDD has a classification performance close to the conventional one-against-one SVM, and can be applied to fault classification of PECs in practice.

  4. A Method to Compare the Descriptive Power of Different Types of Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt

    1980-01-01

    The purpose of this paper is to show how the descriptive power of different types of Petri nets can be compared, without the use of Petri net languages. Moreover the paper proposes an extension of condition/event-nets and it is shown that this extension has the same descriptive power as condition/event-nets....

  5. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  6. Study on the relevance of some of the description methods for plateau-honed surfaces

    International Nuclear Information System (INIS)

    Yousfi, M; Mezghani, S; Demirci, I; El Mansori, M

    2014-01-01

    Much work has been undertaken in recent years into the determination of a complete parametric description of plateau-honed surfaces with the intention of making a link between the process conditions, the surface topography and the required functional performances. Different advanced techniques (plateau/valleys decomposition using the normalized Abbott–Firestone curve or morphological operators, multiscale decomposition using continuous wavelets transform, etc) were proposed and applied in different studies. This paper re-examines the current state of developments and addresses a discussion on the relevance of the different proposed parameters and characterization methods for plateau-honed surfaces by considering the control loop manufacturing-characterization-function. The relevance of appropriate characterization is demonstrated through two experimental studies. They consider the effect of the most plateau honing process variables (the abrasive grit size and abrasive indentation velocity in finish-honing and the plateau-honing stage duration and pressure) on cylinder liner surface textures and hydrodynamic friction of the ring-pack system. (paper)

  7. Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, F.; Tonn, B.

    1999-05-01

    This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

  8. Appropriate description of intermolecular interactions in the methane hydrates: an assessment of DFT methods.

    Science.gov (United States)

    Liu, Yuan; Zhao, Jijun; Li, Fengyu; Chen, Zhongfang

    2013-01-15

    Accurate description of hydrogen-bonding energies between water molecules and van der Waals interactions between guest molecules and host water cages is crucial for study of methane hydrates (MHs). Using high-level ab initio MP2 and CCSD(T) results as the reference, we carefully assessed the performance of a variety of exchange-correlation functionals and various basis sets in describing the noncovalent interactions in MH. The functionals under investigation include the conventional GGA, meta-GGA, and hybrid functionals (PBE, PW91, TPSS, TPSSh, B3LYP, and X3LYP), long-range corrected functionals (ωB97X, ωB97, LC-ωPBE, CAM-B3LYP, and LC-TPSS), the newly developed Minnesota class functionals (M06-L, M06-HF, M06, and M06-2X), and the dispersion-corrected density functional theory (DFT) (DFT-D) methods (B97-D, ωB97X-D, PBE-TS, PBE-Grimme, and PW91-OBS). We found that the conventional functionals are not suitable for MH, notably, the widely used B3LYP functional even predicts repulsive interaction between CH(4) and (H(2)O)(6) cluster. M06-2X is the best among the M06-Class functionals. The ωB97X-D outperforms the other DFT-D methods and is recommended for accurate first-principles calculations of MH. B97-D is also acceptable as a compromise of computational cost and precision. Considering both accuracy and efficiency, B97-D, ωB97X-D, and M06-2X functional with 6-311++G(2d,2p) basis set without basis set superposition error (BSSE) correction are recommended. Though a fairly large basis set (e.g., aug-cc-pVTZ) and BSSE correction are necessary for a reliable MP2 calculation, DFT methods are less sensitive to the basis set and BSSE correction if the basis set is sufficient (e.g., 6-311++G(2d,2p)). These assessments provide useful guidance for choosing appropriate methodology of first-principles simulation of MH and related systems. © 2012 Wiley Periodicals, Inc. Copyright © 2012 Wiley Periodicals, Inc.

  9. Time-dependent Hartree--Fock method: description of heavy-ion collisions and allowance for correlations

    International Nuclear Information System (INIS)

    Maedler, P.

    1984-01-01

    The review describes the application of the time-dependent Hartree--Fock method to the description of heavy-ion interactions at energies of order 10 MeV/nucleon. The fundamentals of the method are presented and qualitative properties of its results are discussed. Realistic calculations of fusion reactions, deep inelastic collisions, and particle emission are presented and compared with the corresponding experimental data. Various approaches that generalize the method by taking into account correlations are considered

  10. Description of methods for making activation detectors for use in nuclear reactors; Description des procedes de fabrication des detecteurs d'activation utilises dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Barbalat, R; Le Coguie, R; Leger, P; Salon, L; Thierry, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    A brief description of methods currently used for making activation detectors, thin films and various deposits used in nuclear reactors. The thicknesses required vary from about a few tenths of a micron to a few tenths of a millimeter. Different techniques are used for fixing the large variety of elements: rolling, moulding, painting, electrolysis, vacuum deposition, thin films, wires, enamels, protective linings, etc. (authors) [French] Expose succinct des procedes actuellement mis en oeuvre pour la realisation des detecteurs d'activation, feuilles minces et depots divers utilises dans les reacteurs nucleaires. La gamme des epaisseurs necessaires s'etendant approximativement des dixiemes de micrometre aux dixiemes de millimetre. La diversite des elements a fixer justifiant les techniques differentes selon les cas: laminage, moulage, peinture, electrolyse, depot sous vide, couches minces, fils, emaux, revetements protecteurs, etc. (auteurs)

  11. 29 CFR 2520.104b-4 - Alternative methods of compliance for furnishing the summary plan description and summaries of...

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Alternative methods of compliance for furnishing the summary plan description and summaries of material modifications of a pension plan to a retired participant, a separated participant with vested benefits, and a beneficiary receiving benefits. 2520.104b-4 Section 2520.104b-4 Labor Regulations Relating to...

  12. Description and validation of a combination of acoustical radiosity and the image source method

    DEFF Research Database (Denmark)

    Marbjerg, Gerd Høy; Jeong, Cheol-Ho; Brunskog, Jonas

    2014-01-01

    A model that combines image source modelling and acoustical radiosity with complex boundary con- ditions, thus including phase shifts on reflection, has been developed. The model is denoted Phased Acoustical Radiosity and Image Source Model (PARISM). It has been developed in order to be able...... to model both specular and diffuse reflections with complex-valued acoustical descriptions of the surfaces. This paper mainly describes the combination of the two models and the implementation of the angle dependent surface descriptions both in the image source model and in acoustical radiosity...

  13. Rapid descriptive sensory methods – Comparison of Free Multiple Sorting, Partial Napping, Napping, Flash Profiling and conventional profiling

    DEFF Research Database (Denmark)

    Dehlholm, Christian; Brockhoff, Per B.; Meinert, Lene

    2012-01-01

    is a modal restriction of Napping to specific sensory modalities, directing sensation and still allowing a holistic approach to products. The new methods are compared to Flash Profiling, Napping and conventional descriptive sensory profiling. Evaluations are performed by several panels of expert assessors......Two new rapid descriptive sensory evaluation methods are introduced to the field of food sensory evaluation. The first method, free multiple sorting, allows subjects to perform ad libitum free sortings, until they feel that no more relevant dissimilarities among products remain. The second method...... are applied for the graphical validation and comparisons. This allows similar comparisons and is applicable to single-block evaluation designs such as Napping. The partial Napping allows repetitions on multiple sensory modalities, e.g. appearance, taste and mouthfeel, and shows the average...

  14. Statistical analysis and interpretation of prenatal diagnostic imaging studies, Part 2: descriptive and inferential statistical methods.

    Science.gov (United States)

    Tuuli, Methodius G; Odibo, Anthony O

    2011-08-01

    The objective of this article is to discuss the rationale for common statistical tests used for the analysis and interpretation of prenatal diagnostic imaging studies. Examples from the literature are used to illustrate descriptive and inferential statistics. The uses and limitations of linear and logistic regression analyses are discussed in detail.

  15. Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

    Science.gov (United States)

    Lennington, R. K.; Rassbach, M. E.

    1979-01-01

    Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

  16. Minimum Description Length Block Finder, a Method to Identify Haplotype Blocks and to Compare the Strength of Block Boundaries

    OpenAIRE

    Mannila, H.; Koivisto, M.; Perola, M.; Varilo, T.; Hennah, W.; Ekelund, J.; Lukk, M.; Peltonen, L.; Ukkonen, E.

    2003-01-01

    We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the ...

  17. Shielding chalculations in x-rays installations for medical diagnosis. description of the method and computational solution

    International Nuclear Information System (INIS)

    Borroto Valdes, M.; Saez, D.G.

    1992-01-01

    Shielding requirements for x-rays diagnostic installations are investigated. The description of an entirely analytical method for calculation of thickness, based in the papers of Simpkin and NCRP49, is presented. Considerations described in specialized method to solving this problem. A program for microcomputer IBM and compatibles ones is available for estimation of minimum shielding requirements in lead, concrete and steel. Similar results were obtained from comparing with others authors

  18. Development and implementation of theoretical methods for the description of electronically core-excited states

    Energy Technology Data Exchange (ETDEWEB)

    Wenzel, Jan

    2016-03-23

    My PhD project mainly consists of two important parts. One was to enhance and develop variants of the core-valence-separation-algebraic-diagrammatic-construction (CVS-ADC) method and implement all approaches efficiently in the adcman program, which is part of the Q-chem program package. Secondly, I benchmarked these implementations and simulated X-ray absorption spectra of small- and medium-sized molecules from different fields. In this thesis, I present my implementations, as well as the results and applications obtained with the CVS-ADC methods and give a general introduction into quantum chemical methods. At first, I implemented the CVS-ADC approach up to the extended second in an efficient way. The program is able to deal with systems up to 500 basis functions in an adequate computational time, which allows for accurate calculations of medium-sized closed-shell molecules, e.g. acenaphthenequinone (ANQ). Afterwards, the CVS-ADC implementation was extended for the first time to deal with open-shell systems, i.e. ions and radicals, which implies a treatment of unrestricted wave functions and spin-orbitals. The resulting method is denoted as CVS-UADC(2)-x. For the first time, I applied the CVS approximation to the the third order ADC scheme, derived the working equations, and implemented the CVS-ADC(3) method in adcman. As the last step, I applied the CVS formalism for the first time to the ISR approach to enable calculations of core-excited state properties and densities. To benchmark all restricted and unrestricted CVS-ADC/CVS-ISR methods up to third order in perturbation theory, I chose a set of small molecules, e.g. carbon monoxide (CO). The calculated values of core-excitation energies, transition moments and static dipole moments are compared with experimental data or other approaches, thereby estimating complete basis set (CBS) limits. Furthermore, a comprehensive study of different basis sets is performed. In combination with the CBS limit of the aug

  19. Universal Natural Shapes: From Unifying Shape Description to Simple Methods for Shape Analysis and Boundary Value Problems

    Science.gov (United States)

    Gielis, Johan; Caratelli, Diego; Fougerolle, Yohan; Ricci, Paolo Emilio; Tavkelidze, Ilia; Gerats, Tom

    2012-01-01

    Gielis curves and surfaces can describe a wide range of natural shapes and they have been used in various studies in biology and physics as descriptive tool. This has stimulated the generalization of widely used computational methods. Here we show that proper normalization of the Levenberg-Marquardt algorithm allows for efficient and robust reconstruction of Gielis curves, including self-intersecting and asymmetric curves, without increasing the overall complexity of the algorithm. Then, we show how complex curves of k-type can be constructed and how solutions to the Dirichlet problem for the Laplace equation on these complex domains can be derived using a semi-Fourier method. In all three methods, descriptive and computational power and efficiency is obtained in a surprisingly simple way. PMID:23028417

  20. Verbal Description of Concrete Objects: A Method for Assessing Semantic Circumlocution in Persons With Aphasia.

    Science.gov (United States)

    Antonucci, Sharon M; MacWilliam, Colleen

    2015-11-01

    We investigated from a theoretically motivated perspective what information differentiated sufficient from insufficient descriptions of objects provided by persons with aphasia. Twenty-one adults with aphasia consequent to single left-hemisphere stroke verbally described 9 living and 9 nonliving objects. Responses were scored for accuracy (i.e., sufficiency) and tallied for type and quantity of semantic feature information provided. Main effects and interactions were identified using repeated measures analyses of variance, with significant findings followed up with planned comparisons. Differences between correct and incorrect descriptions were identified with respect to both feature type and feature distinctiveness for living and nonliving items, in particular highlighting the importance of distinctive features in descriptions of both domains. These findings add to the relatively small body of literature investigating semantic feature processing in adults with aphasia. This is a critical gap to close when considered in light of the preponderance of semantically based treatments for word-retrieval impairment in stroke-aphasia. Our findings provide preliminary support for the notion that semantically guided treatments for word-retrieval impairment in stroke-aphasia may be geared toward increasing specificity of semantic circumlocution to increase semantic self-cueing and to improve communication of information to conversation partners.

  1. Description of a method for assessing veld condition in the Karoo ...

    African Journals Online (AJOL)

    Keywords: Canopy-spread cover; Current grazing capacity; Dry matter; Ecological index method; Forage; Grazing-index method; Karoo; Line-point survey method; Strikes; Veld condition; Veld condition index; botany; method; south africa; razing-index method; razing capacity; ine-point survey method; eld condition index

  2. Minimum description length block finder, a method to identify haplotype blocks and to compare the strength of block boundaries.

    Science.gov (United States)

    Mannila, H; Koivisto, M; Perola, M; Varilo, T; Hennah, W; Ekelund, J; Lukk, M; Peltonen, L; Ukkonen, E

    2003-07-01

    We describe a new probabilistic method for finding haplotype blocks that is based on the use of the minimum description length (MDL) principle. We give a rigorous definition of the quality of a segmentation of a genomic region into blocks and describe a dynamic programming algorithm for finding the optimal segmentation with respect to this measure. We also describe a method for finding the probability of a block boundary for each pair of adjacent markers: this gives a tool for evaluating the significance of each block boundary. We have applied the method to the published data of Daly and colleagues. The results expose some problems that exist in the current methods for the evaluation of the significance of predicted block boundaries. Our method, MDL block finder, can be used to compare block borders in different sample sets, and we demonstrate this by applying the MDL-based method to define the block structure in chromosomes from population isolates.

  3. New Jersey Center for Tourette Syndrome Sharing Repository: methods and sample description

    Directory of Open Access Journals (Sweden)

    King Robert A

    2008-11-01

    Full Text Available Abstract Background Tourette Syndrome is a neuropsychiatric disorder characterized by chronic motor and phonic tics. Affected individuals and their family members are at an increased risk for other neuropsychiatric conditions including obsessive-compulsive disorder and attention deficit hyperactivity disorder. While there is consistent evidence that genetic factors play a significant etiologic role, no replicable susceptibility alleles have thus far been identified. Description Here we discuss a sharing resource of clinical and genetic data, the New Jersey Center for Tourette Syndrome Sharing Repository, whose goal is to provide clinical data, DNA, and lymphoblastoid cell lines to qualified researchers. Conclusion Opening access to the data and patient material to the widest possible research community will hasten the identification of causal genetic factors and facilitate better understanding and treatment of this often impairing disorder.

  4. The Thai Anesthesia Incidents Study (THAI Study) of anesthetic outcomes: I. Description of methods and populations.

    Science.gov (United States)

    Charuluxananan, Somrat; Suraseranivongse, Suwannee; Punjasawadwong, Yodying; Somboonviboon, Wanna; Nipitsukarn, Thana; Sothikarnmanee, Thepakorn; Vasinanukorn, Mayuree; Werawatganon, Thewarug; Tanudsintum, Surasak; Lekprasert, Varinee; Hintong, Thanoo

    2005-11-01

    Since anesthesia, unlike medical or surgical specialties, does not constitute treatment, The Royal College of Anesthesiologists of Thailand host the Thai Anesthesia Incidents Study (THAI Study) of anesthetic outcomes to determine factors related to anesthesia related adverse events. A prospective descriptive study of occurrence screening was conducted in 20 hospitals comprised of 7 university, 4 general and 4 district hospitals across Thailand. Anesthesia personnels were required to fill up patient-related, surgical-related, anesthesia-related variables and adverse outcomes on a strutured data entry form. The data included preanesthetic evaluation intraoperative period and 24 hr postoperative period. Adverse events specific form was recorded when adverse events occurred. All data were keyed in data management unit with double entry technique and descriptive statistics was used in the first phase of this study. A total of 163403 consecutive cases were recorded in one year. The mean (S.D.) of age, weight and height of patients were 38.6(2.3) yrs, 53.9(17.7) kgs and 153.4(22.7) cm respectively. There were more female (52.9%) than male (47. 1%) patients with ASA PS 1, 2, 3, 4, 5 = 50.8%, 36.3%, 10.7%, 2.0%, 0.2% respectively. Hypertension (11.6%), anemia (7.7%) and diabetes melitus (6.8%) were the three most common abnormalities in preanesthetic history taking. Mallampati score of 111870 patients grade 1, 2, 3, 4 were 54.0%, 39.7%, 5.6%, 0.7% and laryngoscopic grade 1, 2, 3, 4 of 74888 patients were 81.0%, 15.5%, 3.0% and 0.5% respectively. The first phase of THAI study epidemiological project can represent both the anesthesia and surgical profiles in Thailand. The collected data available should be useful for the improvement of the quality of anesthesia, guidelines for clinical practices, medical education and for further research.

  5. Description of rotational excitations of odd nuclei by the method of projection

    International Nuclear Information System (INIS)

    Mazepus, V.V.

    1981-01-01

    We have carried out a projection on the angular-momentum operator eigenspace for deformed nuclei. The space of the trial wave functions is chosen to be broader than in the ordinary projection approach. It is shown that this method of projection leads to the particle + rotor model but not to the cranking model. A comparison is made with the method of approximate projection

  6. Description of development of an analytical method for measurement of PAA in tattoo ink and PMU

    DEFF Research Database (Denmark)

    Lassen, Pia

    This review gives a background on azo pigments and primary aromatic amines (PAA) and describe how to develop a robust method for analyzing these in tattoo ink.......This review gives a background on azo pigments and primary aromatic amines (PAA) and describe how to develop a robust method for analyzing these in tattoo ink....

  7. Developing corpus-based translation methods between informal and formal mathematics : project description

    NARCIS (Netherlands)

    Kaliszyk, C.; Urban, J.; Vyskocil, J.; Geuvers, J.H.; Watt, S.M.; Davenport, J.H.; Sexton, A.P.; Sojka, P.; Urban, J.

    2014-01-01

    The goal of this project is to (i) accumulate annotated informal/formal mathematical corpora suitable for training semi-automated translation between informal and formal mathematics by statistical machine-translation methods, (ii) to develop such methods oriented at the formalization task, and in

  8. Description of heat flux measurement methods used in hydrocarbon and propellant fuel fires at Sandia.

    Energy Technology Data Exchange (ETDEWEB)

    Nakos, James Thomas

    2010-12-01

    The purpose of this report is to describe the methods commonly used to measure heat flux in fire applications at Sandia National Laboratories in both hydrocarbon (JP-8 jet fuel, diesel fuel, etc.) and propellant fires. Because these environments are very severe, many commercially available heat flux gauges do not survive the test, so alternative methods had to be developed. Specially built sensors include 'calorimeters' that use a temperature measurement to infer heat flux by use of a model (heat balance on the sensing surface) or by using an inverse heat conduction method. These specialty-built sensors are made rugged so they will survive the environment, so are not optimally designed for ease of use or accuracy. Other methods include radiometers, co-axial thermocouples, directional flame thermometers (DFTs), Sandia 'heat flux gauges', transpiration radiometers, and transverse Seebeck coefficient heat flux gauges. Typical applications are described and pros and cons of each method are listed.

  9. Description of comparison method for evaluating spatial or temporal homogeneity of environmental monitoring data

    International Nuclear Information System (INIS)

    Mecozzi, M.; Cicero, A.M.

    1995-01-01

    In this paper a comparison method to verify the homogeneity/inhomogeneity of environmental monitoring data is described. The comparison method is based on the simultaneous application of three statistical tests: One-Way ANOVA, Kruskal Wallis and One-Way IANOVA. Robust tests such as IANOVA and Kruskal Wallis can be more efficient than the usual ANOVA methods because are resistant against the presence of outliers and divergences from the normal distribution of the data. The evidences of the study are that the validation of the result about presence/absence of homogeneity in the data set is obtained when it is confirmed by two tests at least

  10. Microscopic description of nuclear few-body systems with the stochastic variational method

    International Nuclear Information System (INIS)

    Suzuki, Yasuyuki

    2000-01-01

    A simple gambling procedure called the stochastic variational method can be applied, together with appropriate variational trial functions, to solve a few-body system where the correlation between the constituents plays an important role in determining its structure. The usefulness of the method is tested by comparing to other accurate solutions for Coulombic systems. Examples of application shown here include few-nucleon systems interacting with realistic forces and few-cluster systems with the Pauli principle being taken into account properly. These examples confirm the power of the stochastic variational method. There still remain many problems for extending to a system consisting of more particles. (author)

  11. Physics and numerical methods of OPTMAN. A coupled-channels method based on soft-rotator model for a description of collective nuclear structure and excitations

    International Nuclear Information System (INIS)

    Soukhovitskii, Efrem Sh.; Morogovskii, Gennadij B.; Chiba, Satoshi; Iwamoto, Osamu; Fukahori, Tokio

    2004-03-01

    This report gives a detailed description of the theory and computational algorithms of modernized coupled-channels optical model code OPTMAN based on the soft-rotator model for the collective nuclear structure and excitations. This work was performed under the Project Agreement B-521 with the International Science and Technology Center (Moscow), financing party of which is Japan. As a result of this work, the computational method of OPTMAN was totally updated, and an user-friendly interface was attached. (author)

  12. Description and evaluation of a peracetic acid air sampling and analysis method.

    Science.gov (United States)

    Nordling, John; Kinsky, Owen R; Osorio, Magdalena; Pechacek, Nathan

    2017-12-01

    Peracetic acid (PAA) is a corrosive chemical with a pungent odor, which is extensively used in occupational settings and causes various health hazards in exposed workers. Currently, there is no US government agency recommended method that could be applied universally for the sampling and analysis of PAA. Legacy methods for determining airborne PAA vapor levels frequently suffered from cross-reactivity with other chemicals, particularly hydrogen peroxide (H 2 O 2 ). Therefore, to remove the confounding factor of cross-reactivity, a new viable, sensitive method was developed for assessment of PAA exposure levels, based on the differential reaction kinetics of PAA with methyl p-tolylsulfide (MTS), relative to H 2 O 2 , to preferentially derive methyl p-tolysulfoxide (MTSO). By quantifying MTSO concentration produced in the liquid capture solution from an air sampler, using an internal standard, and utilizing the reaction stoichiometry of PAA and MTS, the original airborne concentration of PAA is determined. After refining this liquid trap high-performance liquid chromatography (HPLC) method in the laboratory, it was tested in five workplace settings where PAA products were used. PAA levels ranged from the detection limit of 0.013 parts per million (ppm) to 0.4 ppm. The results indicate a viable and potentially dependable method to assess the concentrations of PAA vapors under occupational exposure scenarios, though only a small number of field measurements were taken while field testing this method. However, the low limit of detection and precision offered by this method makes it a strong candidate for further testing and validation to expand the uses of this liquid trap HPLC method.

  13. The Moulded Site Data (MSD) wind correlation method: description and assessment

    Energy Technology Data Exchange (ETDEWEB)

    King, C.; Hurley, B.

    2004-12-01

    The long-term wind resource at a potential windfarm site may be estimated by correlating short-term on-site wind measurements with data from a regional meteorological station. A correlation method developed at Airtricity is described in sufficient detail to be reproduced. An assessment of its performance is also described; the results may serve as a guide to expected accuracy when using the method as part of an annual electricity production estimate for a proposed windfarm. (Author)

  14. METHODS OF ESTIMATION OF COMPLEX FREQUENCY DESCRIPTIONS OF LTM AND BRM BEARING KNOTS

    OpenAIRE

    A. Pohrebnyak

    2015-01-01

    The method of studying bearing units (ball bearings) of handling and construction of road machines in the low-frequency range of vibration-acoustic signal is presented. It includes: the choice of the method and place of vibration sensors installation, vibration signals registration modes, instruments, algorithms of processing and formation of diagnostic features of the signal, determination of the threshold values of the diagnostic parameter. The characteristic spectra of vibration velocities...

  15. What is it like to meditate? Methods and issues for micro-phenomenological description of meditative experience

    DEFF Research Database (Denmark)

    Petitmengin, Claire; Beek, Martijn van; Bitbol, Michel

    2017-01-01

    associated with contemplative practice: what it is like to meditate – from moment to moment, at different stages of practice – remains almost invisible in contemporary contemplative science. Recently, "micro-phenomenological" interview methods have been developed to help us become aware of lived experience......In our society where interest in Buddhist meditation is expanding enormously, numerous scientific studies are now conducted on the neurophysiological effects of meditation practices and on the neural correlates of meditative states. However, very few studies have been conducted on the experience...... and describe it with rigor and precision. The present article presents the results of a pilot project aiming at applying these methods to the description of meditative experience. The first part of the article describes these methods and their adjustment for the investigation of meditative experience...

  16. Use of orthonormal polynomial expansion method to the description of the energy spectra of biological liquids

    International Nuclear Information System (INIS)

    Bogdanova, N.B.; Todorov, S.T.; Ososkov, G.A.

    2015-01-01

    Orthonormal polynomial expansion method (OPEM) is applied to the data obtained by the method of energy spectra to the liquid of the biomass of wheat in the case when herbicides are used. Since the biomass of a biological object contains liquid composed mainly of water, the method of water spectra is applicable to this case as well. For comparison, the similar data obtained from control sample consisting of wheat liquid without the application of herbicides are shown. The total variance OPEM is involved including errors in both dependent and independent variables. Special criteria are used for evaluating the optimal polynomial degree and the number of iterations. The presented numerical results show good agreement with the experimental data. The developed analysis frame is of interest for future analysis in theoretical ecology.

  17. Applying terminological methods and description logic for creating and implementing and ontology on inhibition

    DEFF Research Database (Denmark)

    Zambach, Sine; Madsen, Bodil Nistrup

    2009-01-01

    By applying formal terminological methods to model an ontology within the domain of enzyme inhibition, we aim to clarify concepts and to obtain consistency. Additionally, we propose a procedure for implementing this ontology in OWL with the aim of obtaining a strict structure which can form...

  18. Description of the electron-hydrogen collision by the Coulomb Fourier transform method

    International Nuclear Information System (INIS)

    Levin, S.B.

    2005-01-01

    A recently developed Coulomb Fourier Transform method is applied to the system containing one heavy ion and two electrons. The transformed Hamiltonian is described with a controlled accuracy in an effective finite basis set as a finite dimensional operator matrix. The kernels of interaction are formulated in terms of the so called Nordsieck integrals

  19. Research of descriptions of collinear aerial receiving system ADS-B by numeral methods

    Directory of Open Access Journals (Sweden)

    В. П. Харченко

    2013-07-01

    Full Text Available Calculations of electric field intensity and directional diagrammes for colinear antennas using a method of moments in the framework of two program complexes are carried out. Comparison has shown high level of results coincidence. The sample of the antenna which is used in operating system for reception of ADS-B signals from airborne transponders is constructed

  20. Description of a double centrifugation tube method for concentrating canine platelets.

    Science.gov (United States)

    Perazzi, Anna; Busetto, Roberto; Martinello, Tiziana; Drigo, Michele; Pasotto, Daniela; Cian, Francesco; Patruno, Marco; Iacopetti, Ilaria

    2013-07-22

    To evaluate the efficiency of platelet-rich plasma preparations by means of a double centrifugation tube method to obtain platelet-rich canine plasma at a concentration at least 4 times higher than the baseline value and a concentration of white blood cells not exceeding twice the reference range. A complete blood count was carried out for each sample and each concentrate. Whole blood samples were collected from 12 clinically healthy dogs (consenting blood donors). Blood was processed by a double centrifugation tube method to obtain platelet concentrates, which were then analyzed by a flow cytometry haematology system for haemogram. Platelet concentration and white blood cell count were determined in all samples. Platelet concentration at least 4 times higher than the baseline value and a white blood cell count not exceeding twice the reference range were obtained respectively in 10 cases out of 12 (83.3%) and 11 cases out of 12 (91.6%). This double centrifugation tube method is a relatively simple and inexpensive method for obtaining platelet-rich canine plasma, potentially available for therapeutic use to improve the healing process.

  1. A method to assess obstetric outcomes using the 10-Group Classification System: a quantitative descriptive study.

    LENUS (Irish Health Repository)

    Rossen, Janne

    2017-01-01

    Internationally, the 10-Group Classification System (TGCS) has been used to report caesarean section rates, but analysis of other outcomes is also recommended. We now aim to present the TGCS as a method to assess outcomes of labour and delivery using routine collection of perinatal information.

  2. Microscopic and self-consistent description of nuclear properties by extended generator-coordinate method

    International Nuclear Information System (INIS)

    Didong, M.

    1976-01-01

    The extend generator-coordinated method is discussed and a procedure is given for the solution of the Hill-Wheeler equation. The HFB-theory, the particle-number and angular-momentum projections necessary for symmetry, and the modified surprice delta interaction are discussed. The described procedures are used to calculate 72 Ge, 70 Zn and 74 Ge properties. (BJ) [de

  3. The description of a method for accurately estimating creatinine clearance in acute kidney injury.

    Science.gov (United States)

    Mellas, John

    2016-05-01

    Acute kidney injury (AKI) is a common and serious condition encountered in hospitalized patients. The severity of kidney injury is defined by the RIFLE, AKIN, and KDIGO criteria which attempt to establish the degree of renal impairment. The KDIGO guidelines state that the creatinine clearance should be measured whenever possible in AKI and that the serum creatinine concentration and creatinine clearance remain the best clinical indicators of renal function. Neither the RIFLE, AKIN, nor KDIGO criteria estimate actual creatinine clearance. Furthermore there are no accepted methods for accurately estimating creatinine clearance (K) in AKI. The present study describes a unique method for estimating K in AKI using urine creatinine excretion over an established time interval (E), an estimate of creatinine production over the same time interval (P), and the estimated static glomerular filtration rate (sGFR), at time zero, utilizing the CKD-EPI formula. Using these variables estimated creatinine clearance (Ke)=E/P * sGFR. The method was tested for validity using simulated patients where actual creatinine clearance (Ka) was compared to Ke in several patients, both male and female, and of various ages, body weights, and degrees of renal impairment. These measurements were made at several serum creatinine concentrations in an attempt to determine the accuracy of this method in the non-steady state. In addition E/P and Ke was calculated in hospitalized patients, with AKI, and seen in nephrology consultation by the author. In these patients the accuracy of the method was determined by looking at the following metrics; E/P>1, E/P1 and 0.907 (0.841, 0.973) for 0.95 ml/min accurately predicted the ability to terminate renal replacement therapy in AKI. Include the need to measure urine volume accurately. Furthermore the precision of the method requires accurate estimates of sGFR, while a reasonable measure of P is crucial to estimating Ke. The present study provides the

  4. Community assessment in a suburban Hispanic community: a description of method.

    Science.gov (United States)

    Ludwig-Beymer, P; Blankemeier, J R; Casas-Byots, C; Suarez-Balcazar, Y

    1996-01-01

    The Hispanic population is growing rapidly and is composed of individuals from many countries with varying levels of acculturation, education, income, and citizenship status. The Genesis Health and Empowerment Program was developed locally in 1993 to improve the health status of Hispanics living in Des Plaines, Illinois, USA. Understanding the quality of life and its cultural patterning for the community is an essential aspect of planning and implementing a health care delivery program. Using Leininger's Theory of Culture Care: Diversity and Universality as a framework, adapted the Concerns Report Method was essential for data collection. This paper describes the method used for learning about the Hispanic community. Steps included conducting three focus groups, constructing a structured interview guide, collecting data, analyzing data, and reporting the findings to the community. Some very preliminary findings are presented and implications for transcultural health care are described.

  5. Description of a double centrifugation tube method for concentrating canine platelets

    OpenAIRE

    Perazzi, Anna; Busetto, Roberto; Martinello, Tiziana; Drigo, Michele; Pasotto, Daniela; Cian, Francesco; Patruno, Marco; Iacopetti, Ilaria

    2013-01-01

    Background To evaluate the efficiency of platelet-rich plasma preparations by means of a double centrifugation tube method to obtain platelet-rich canine plasma at a concentration at least 4 times higher than the baseline value and a concentration of white blood cells not exceeding twice the reference range. A complete blood count was carried out for each sample and each concentrate. Whole blood samples were collected from 12 clinically healthy dogs (consenting blood donors). Blood was proces...

  6. Highly Accurate Tree Models Derived from Terrestrial Laser Scan Data: A Method Description

    Directory of Open Access Journals (Sweden)

    Jan Hackenberg

    2014-05-01

    Full Text Available This paper presents a method for fitting cylinders into a point cloud, derived from a terrestrial laser-scanned tree. Utilizing high scan quality data as the input, the resulting models describe the branching structure of the tree, capable of detecting branches with a diameter smaller than a centimeter. The cylinders are stored as a hierarchical tree-like data structure encapsulating parent-child neighbor relations and incorporating the tree’s direction of growth. This structure enables the efficient extraction of tree components, such as the stem or a single branch. The method was validated both by applying a comparison of the resulting cylinder models with ground truth data and by an analysis between the input point clouds and the models. Tree models were accomplished representing more than 99% of the input point cloud, with an average distance from the cylinder model to the point cloud within sub-millimeter accuracy. After validation, the method was applied to build two allometric models based on 24 tree point clouds as an example of the application. Computation terminated successfully within less than 30 min. For the model predicting the total above ground volume, the coefficient of determination was 0.965, showing the high potential of terrestrial laser-scanning for forest inventories.

  7. Description of a method of control for glass lenses used as a protection medium against radiation

    International Nuclear Information System (INIS)

    Alonso, J.V.S.; Torio, P.P.

    1977-01-01

    The control of ocular protection medium which is normally used by workers, finds itself confronted by unsurmountable difficulties. Transmission determination needs fine glass lenses, extrapolating the values obtained to the real value of the medium used. The degree of protection required of the glass used by workers has been determined using successive approximations. The work method is quick and simple, and the apparatus used is within the reach of any medium sized laboratory. A theoretical justification has been made of the fundamental principles of the method; for example, the protective power of various filter lenses used by workers in this country has been determined. The method has been centred on the possibility of its practical application. The results obtained are interpreted taking into consideration a possible emissing source, and their discussion is based on prevailing standards which exist in most European countries. The control carried out has allowed to state that in most cases the protection medium used is not adequate, owing to a poor selection or an inadequate maintenance

  8. Alternative methods for dispoal of low-level radioactive wastes. Task 1. Description of methods and assessment of criteria

    International Nuclear Information System (INIS)

    Bennett, R.D.; Miller, W.O.; Warriner, J.B.; Malone, P.G.; McAneny, C.C.

    1984-04-01

    The study reported herein contains the results of Task 1 of a four-task study entitled Criteria for Evaluating Engineered Facilities. The overall objective of this study is to ensure that the criteria needed to evaluate five alternative low-level radioactive waste (LLW) disposal methods are available to the Nuclear Regulatory Commission (NRC) and the Agreement States. The alternative methods considered are belowground vaults, aboveground vaults, earth mounded concrete bunkers, mined cavities, and augered holes. Each of these alternatives is either being used by other countries for low-level radioactive waste (LLW) disposal or is being considered by other countries or US agencies. In this report the performance requirements are listed, each alternative is described, the experience gained with its use is discussed, and the performance capabilities of each method are addressed. Next, the existing 10 CFR Part 61 Subpart D criteria with respect to paragraphs 61.50 through 61.53, pertaining to site suitability, design, operations and closure, and monitoring are assessed for applicability to evaluation of each alternative. Preliminary conclusions and recommendations are offered on each method's suitability as an LLW disposal alternative, the applicability of the criteria, and the need for supplemental or modified criteria

  9. Relationship between quantitative and descriptive methods of studying blood flow through intrapulmonary arteriovenous anastomoses during exercise.

    Science.gov (United States)

    Duke, Joseph W; Elliott, Jonathan E; Laurie, Steven S; Voelkel, Thomas; Gladstone, Igor M; Fish, Mathews B; Lovering, Andrew T

    2017-09-01

    Several methods exist to study intrapulmonary arteriovenous anastomoses (IPAVA) in humans. Transthoracic saline contrast echocardiography (TTSCE), i.e., bubble scores, is minimally-invasive, but cannot be used to quantify the magnitude of blood flow through IPAVA (Q IPAVA ). Radiolabeled macroaggregates of albumin ( 99m Tc-MAA) have been used to quantify Q IPAVA in humans, but this requires injection of radioactive particles. Previous work has shown agreement between 99m Tc-MAA and TTSCE, but this has not been tested simultaneously in the same group of subjects. Thus, the purpose of this study was to determine if there was a relationship between Q IPAVA quantified with 99m Tc-MAA and bubble scores obtained with TTSCE. To test this, we used 99m Tc-MAA and TTSCE to quantify and detect Q IPAVA at rest and during exercise in humans. Q IPAVA significantly increased from rest to exercise using 99m Tc-MAA and TTSCE and there was a moderately-strong, but significant relationship between methods. Our data suggest that high bubble scores generally correspond with large Q IPAVA quantified with 99m Tc-MAA during exercise. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. [Treatment and personality development with art therapy. A description of the method].

    Science.gov (United States)

    Antalfai, Márta

    2007-01-01

    Composition as a creative form of self-expression plays an important role not only in maintaining health, but also in gaining insight into the healthy personality and in the definition of this category. It seems nowadays that psychology has collected more information on the pathological personality than on the healthy one. Therefore, different workshops of art therapy are also scenes of a "spiritual alchemy" because they can give a deeper insight into the personality in addition to the primary aim of treatment. The method of the thematic art psychotherapy based on catharsis-experience is based on analytical psychology and on analytically oriented group-therapy. The aim is to generate artificial catharsis-experiences employing the impressive forces of poems, music compositions in order to raise the unconscious or the partly experienced partner-conflicts to the surface, which could manifest themselves in the process of the creative work and could be elaborated in group-activity. The creative process (specially adapted art techniques) provides good opportunities for patients to depict their traumas and complexes and also to resolve them involving the whole personality and not only at a cognitive level. The method, tuned to the workings of nature, helps the personality to develop the emotional and volitional segments, the sensitive and empathetic capabilities, as well as the recognition skills of consciousness. In the therapeutic process, the work of art that is created holds a mirror to the creator, offering to him or her the opportunity to face the real complex at the background the actual conflict. The method aims to achieve a reconstruction of psychic dynamics in two ways. The first is an emotional resonance to the changes of nature, of the year and of the feasts, in which the psychic process starts from inside to the direction of the outside world (psychic enrichment and accomodation). The second way leads from the outer world to the inner one and this psychic

  11. Cardiac dimensional analysis by use of biplane cineradiography: description and validation of method.

    Science.gov (United States)

    Lipscomb, K

    1980-01-01

    Biplane cineradiography is a potentially powerful tool for precise measurement of intracardiac dimensions. The most systematic approach to these measurements is the creation of a three-dimensional coordinate system within the x-ray field. Using this system, interpoint distances, such as between radiopaque clips or coronary artery bifurcations, can be calculated by use of the Pythagoras theorem. Alternatively, calibration factors can be calculated in order to determine the absolute dimensions of a structure, such as a ventricle or coronary artery. However, cineradiography has two problems that have precluded widespread use of the system. These problems are pincushion distortion and variable image magnification. In this paper, methodology to quantitate and compensate for these variables is presented. The method uses radiopaque beads permanently mounted in the x-ray field. The position of the bead images on the x-ray film determine the compensation factors. Using this system, measurements are made with a standard deviation of approximately 1% of the true value.

  12. The INTERPHONE study: design, epidemiological methods, and description of the study population

    DEFF Research Database (Denmark)

    Cardis, Elisabeth; Richardson, Lesley; Deltour, Isabelle

    2007-01-01

    . This paper describes the study design and methods and the main characteristics of the study population. INTERPHONE is the largest case-control study to date investigating risks related to mobile phone use and to other potential risk factors for the tumours of interest and includes 2,765 glioma, 2......The very rapid worldwide increase in mobile phone use in the last decade has generated considerable interest in the possible health effects of exposure to radio frequency (RF) fields. A multinational case-control study, INTERPHONE, was set-up to investigate whether mobile phone use increases...... the risk of cancer and, more specifically, whether the RF fields emitted by mobile phones are carcinogenic. The study focused on tumours arising in the tissues most exposed to RF fields from mobile phones: glioma, meningioma, acoustic neurinoma and parotid gland tumours. In addition to a detailed history...

  13. On some descriptive and predictive methods for the dynamics of cancer growth

    Directory of Open Access Journals (Sweden)

    Iulian T. Vlad

    2015-09-01

    Full Text Available Cancer is a widely spread disease that affects a large proportion of the human population, and many research teams are developing algorithms to help medics to understand this disease. In particular, tumor growth has been studied from different viewpoints and several mathematical models have been proposed. In this paper, we review a set of comprehensive and modern tools that are useful for prediction of cancer growth in space and time. We comment on three alternative approaches. We first consider spatio-temporal stochastic processes within a Bayesian framework to model spatial heterogeneity, temporal dependence and spatio-temporal interactions amongst the pixels, providing a general modeling framework for such dynamics. We then consider predictions based on geometric properties of plane curves and vectors, and propose two methods of geometric prediction. Finally we focus on functional data analysis to statistically compare tumor contour evolutions. We also analyze real data on brain tumor.

  14. MATADOR (Methods for the Analysis of Transport And Deposition Of Radionuclides) code description and User's Manual

    International Nuclear Information System (INIS)

    Avci, H.I.; Raghuram, S.; Baybutt, P.

    1985-04-01

    A new computer code called MATADOR (Methods for the Analysis of Transport And Deposition Of Radionuclides) has been developed to replace the CORRAL-2 computer code which was written for the Reactor Safety Study (WASH-1400). This report is a User's Manual for MATADOR. MATADOR is intended for use in system risk studies to analyze radionuclide transport and deposition in reactor containments. The principal output of the code is information on the timing and magnitude of radionuclide releases to the environment as a result of severely degraded core accidents. MATADOR considers the transport of radionuclides through the containment and their removal by natural deposition and by engineered safety systems such as sprays. It is capable of analyzing the behavior of radionuclides existing either as vapors or aerosols in the containment. The code requires input data on the source terms into the containment, the geometry of the containment, and thermal-hydraulic conditions in the containment

  15. Description of a teaching method for research education for palliative care healthcare professionals.

    Science.gov (United States)

    Rhondali, Wadih; Nguyen, Linh My Thi; Peck, Michelle; Vallet, Fabienne; Daneault, Serge; Filbet, Marilene

    2015-04-01

    Despite the rapidly growing availability of palliative care services, there is still much to be done in order to better support clinicians who are starting research programs. Among the barriers identified in the literature, methodological issues and lack of research training programs are often reported. Our aim was to describe an educational research method for healthcare professionals working in palliative care and to report the result of a survey conducted among a three-year sample of students. The course was provided for a multidisciplinary group and was open to all healthcare professionals involved in palliative care. It took place over a single session during a full day. We used a 20-question e-survey to assess student outcomes (e.g., satisfaction, current status of their project). We received answers from 83 of the 119 students (70%) who took the course. The majority were physicians (n = 62, 75%), followed by nurses (n = 17, 21%). During the class, students assessed the role of the teacher as an information provider (n = 51, 61%), role model (n = 36, 43%), and facilitator (n = 33, 40%), and considered all of these roles as suitable, with a score of 3.9-4.7 out of 5. Participants reported a high level of support from the teacher, with a mean score of 8.2 (SD, 1.7) out of 10, and good overall satisfaction with a mean score of 7.6 (1.8). Finally, 51 participants (77%) were able to start their research project after the class, 27 (41%) to complete it, and 8 (12%) to submit their research to a journal or conference. Our results suggest that newer teaching methods such as roleplay, group work, and target acquisition are feasible and effective in a palliative research curriculum. Additional studies are needed to confirm the objective outputs of educational interventions, including research outputs.

  16. Chemical abundances of fast-rotating massive stars. I. Description of the methods and individual results

    Science.gov (United States)

    Cazorla, Constantin; Morel, Thierry; Nazé, Yaël; Rauw, Gregor; Semaan, Thierry; Daflon, Simone; Oey, M. S.

    2017-07-01

    Aims: Recent observations have challenged our understanding of rotational mixing in massive stars by revealing a population of fast-rotating objects with apparently normal surface nitrogen abundances. However, several questions have arisen because of a number of issues, which have rendered a reinvestigation necessary; these issues include the presence of numerous upper limits for the nitrogen abundance, unknown multiplicity status, and a mix of stars with different physical properties, such as their mass and evolutionary state, which are known to control the amount of rotational mixing. Methods: We have carefully selected a large sample of bright, fast-rotating early-type stars of our Galaxy (40 objects with spectral types between B0.5 and O4). Their high-quality, high-resolution optical spectra were then analysed with the stellar atmosphere modelling codes DETAIL/SURFACE or CMFGEN, depending on the temperature of the target. Several internal and external checks were performed to validate our methods; notably, we compared our results with literature data for some well-known objects, studied the effect of gravity darkening, or confronted the results provided by the two codes for stars amenable to both analyses. Furthermore, we studied the radial velocities of the stars to assess their binarity. Results: This first part of our study presents our methods and provides the derived stellar parameters, He, CNO abundances, and the multiplicity status of every star of the sample. It is the first time that He and CNO abundances of such a large number of Galactic massive fast rotators are determined in a homogeneous way. Based on observations obtained with the Heidelberg Extended Range Optical Spectrograph (HEROS) at the Telescopio Internacional de Guanajuato (TIGRE) with the SOPHIE échelle spectrograph at the Haute-Provence Observatory (OHP; Institut Pytheas; CNRS, France), and with the Magellan Inamori Kyocera Echelle (MIKE) spectrograph at the Magellan II Clay telescope

  17. Miller Early Childhood Sustained Home-visiting (MECSH trial: design, method and sample description

    Directory of Open Access Journals (Sweden)

    Anderson Teresa

    2008-12-01

    Full Text Available Abstract Background Home visiting programs comprising intensive and sustained visits by professionals (usually nurses over the first two years of life show promise in promoting child health and family functioning, and ameliorating disadvantage. Australian evidence of the effectiveness of sustained nurse home visiting in early childhood is limited. This paper describes the method and cohort characteristics of the first Australian study of sustained home visiting commencing antenatally and continuing to child-age two years for at-risk mothers in a disadvantaged community (the Miller Early Childhood Sustained Home-visiting trial. Methods and design Mothers reporting risks for poorer parenting outcomes residing in an area of socioeconomic disadvantage were recruited between February 2003 and March 2005. Mothers randomised to the intervention group received a standardised program of nurse home visiting. Interviews and observations covering child, maternal, family and environmental issues were undertaken with mothers antenatally and at 1, 12 and 24 months postpartum. Standardised tests of child development and maternal-child interaction were undertaken at 18 and 30 months postpartum. Information from hospital and community heath records was also obtained. Discussion A total of 338 women were identified and invited to participate, and 208 were recruited to the study. Rates of active follow-up were 86% at 12 months, 74% at 24 months and 63% at 30 months postpartum. Participation in particular data points ranged from 66% at 1 month to 51% at 24 months postpartum. Rates of active follow-up and data point participation were not significantly different for the intervention or comparison group at any data point. Mothers who presented for antenatal care prior to 20 weeks pregnant, those with household income from full-time employment and those who reported being abused themselves as a child were more likely to be retained in the study. The Miller Early

  18. The IMACS Cluster Building Survey. I. Description of the Survey and Analysis Methods

    Science.gov (United States)

    Oemler Jr., Augustus; Dressler, Alan; Gladders, Michael G.; Rigby, Jane R.; Bai, Lei; Kelson, Daniel; Villanueva, Edward; Fritz, Jacopo; Rieke, George; Poggianti, Bianca M.; hide

    2013-01-01

    The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines.With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

  19. Gold Bead Implantation in Acupoints for Coxofemoral Arthrosis in Dogs: Method Description and Adverse Effects

    Directory of Open Access Journals (Sweden)

    Lars Moe

    2012-09-01

    Full Text Available Gold bead implantation has been used for years as an alternative method to improve function in chronic joint disease both in humans and dogs. The aims of the present study were to describe the technique of implanting 24-karat gold beads around the hip joints of dogs with chronic hip dysplasia, and to record any side effects or complications of such treatment. A prospective placebo-controlled double-blinded clinical trial was performed. Eighty dogs were randomly allocated to treatment or placebo, with 38 in the gold implantation group and 42 in the placebo group, and followed intensely for six months. The implantation technique was simple to perform, using fluoroscopy and with the dogs under inhalation anesthesia for about 30 minutes. Adverse effects, measured as pain or discomfort, were seen for a period of up to four weeks in 15 of the dogs in the gold implantation group, compared to six dogs in the placebo group. During implantation, a technical difficulty occurred as 82% of the dogs showed leakage of blood and/or synovia from the needles. The dogs in the gold implantation group were radiographed 18 months later. Of the 30 dogs that were radiographed at both inclusion and 24 months, 80% (24 dogs showed a deterioration of the coxofemoral arthrosis, the other six had stable disease evaluated by radiography. Migration of gold beads was only observed in one dog.

  20. Digital quantification of fibrosis in liver biopsy sections: description of a new method by Photoshop software.

    Science.gov (United States)

    Dahab, Gamal M; Kheriza, Mohamed M; El-Beltagi, Hussien M; Fouda, Abdel-Motaal M; El-Din, Osama A Sharaf

    2004-01-01

    The precise quantification of fibrous tissue in liver biopsy sections is extremely important in the classification, diagnosis and grading of chronic liver disease, as well as in evaluating the response to antifibrotic therapy. Because the recently described methods of digital image analysis of fibrosis in liver biopsy sections have major flaws, including the use of out-dated techniques in image processing, inadequate precision and inability to detect and quantify perisinusoidal fibrosis, we developed a new technique in computerized image analysis of liver biopsy sections based on Adobe Photoshop software. We prepared an experimental model of liver fibrosis involving treatment of rats with oral CCl4 for 6 weeks. After staining liver sections with Masson's trichrome, a series of computer operations were performed including (i) reconstitution of seamless widefield images from a number of acquired fields of liver sections; (ii) image size and solution adjustment; (iii) color correction; (iv) digital selection of a specified color range representing all fibrous tissue in the image and; (v) extraction and calculation. This technique is fully computerized with no manual interference at any step, and thus could be very reliable for objectively quantifying any pattern of fibrosis in liver biopsy sections and in assessing the response to antifibrotic therapy. It could also be a valuable tool in the precise assessment of antifibrotic therapy to other tissue regardless of the pattern of tissue or fibrosis.

  1. THE IMACS CLUSTER BUILDING SURVEY. I. DESCRIPTION OF THE SURVEY AND ANALYSIS METHODS

    Energy Technology Data Exchange (ETDEWEB)

    Oemler, Augustus Jr.; Dressler, Alan; Kelson, Daniel; Villanueva, Edward [Observatories of the Carnegie Institution for Science, 813 Santa Barbara St., Pasadena, CA 91101-1292 (United States); Gladders, Michael G. [Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60637 (United States); Rigby, Jane R. [Observational Cosmology Lab, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Bai Lei [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 3H4 (Canada); Fritz, Jacopo [Sterrenkundig Observatorium, Universiteit Gent, Krijgslaan 281 S9, B-9000 Gent (Belgium); Rieke, George [Steward Observatory, University of Arizona, Tucson, AZ 8572 (United States); Poggianti, Bianca M.; Vulcani, Benedetta, E-mail: oemler@obs.carnegiescience.edu [INAF-Osservatorio Astronomico di Padova, Vicolo dell' Osservatorio 5, I-35122 Padova (Italy)

    2013-06-10

    The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines. With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

  2. Use of antimicrobial drugs in general hospitals. I. Description of population and definition of methods.

    Science.gov (United States)

    Townsend, T R; Shapiro, M; Rosner, B; Kass, E H

    1979-06-01

    The patterns of use of antimicrobial drugs in a random sample of general hosptials in Pennsylvania were studied. The sample was tested for validity, and all deaths and discharges were analyzed for 10 random days drawn across the year spanning July 1973 to June 1974. Methods were developed for abstracting the hospital records and for determining the reproducibility of the findings of the physician and nonphysician chart reviewers. More than 99% of the requested charts were available. In the 5,288 charts reviewed, most of the required data were readily available. The study population was 84% white and 58% female; most patients were in hospitals that had more than 300 beds and that were located in towns with populations of greater than 10,000. In 41% of the 2,070 antimicrobial courses administered to almost 30% of the patients, an explicit clinical statement of why the drug was being given could be found in the chart. The information for review was found in clinical charts, but in half of the charts, the information required was not on face sheets and discharge summaries.

  3. Description of internal flow problems by a boundary integral method with dipole panels

    International Nuclear Information System (INIS)

    Krieg, R.; Hailfinger, G.

    1979-01-01

    In reactor safety studies the failure of single components is postulated or sudden accident loadings are assumed and the consequences are investigated. Often as a first consequence highly transient three dimensional flow problems occur. In contrast to classical flow problems, in most of the above cases the fluid velocities are relatively small whereas the accelerations assume high values. As a consequence both, viscosity effects and dynamic pressures which are proportional to the square of the fluid velocities are usually negligible. For cases, where the excitation times are considerably longer than the times necessary for a wave to traverse characteristic regions of the fluid field, also the fluid compressibility is negligible. Under these conditions boundary integral methods are an appropriate tool to deal with the problem. Flow singularities are distributed over the fluid boundaries in such a way that pressure and velocity fields are obtained which satisfy the boundary conditions. In order to facilitate the numerical treatment the fluid boundaries are approximated by a finite number of panels with uniform singularity distributions on each of them. Consequently the pressure and velocity field of the given problem may be obtained by superposition of the corresponding fields due to these panels with their singularity intensities as unknown factors. Then satisfying the boundary conditions in so many boundary points as panels have been introduced, yields a system of linear equations which in general allows for a unique determination of the unknown intensities. (orig./RW)

  4. In situ stress measurement with the new LVDT - Cell - method description and verification

    International Nuclear Information System (INIS)

    Hakala, M.; Christiansson, R.; Martin, D.; Siren, T.; Kemppainen, K.

    2013-11-01

    Posiva Oy and SKB (Svensk Kaernbraenslehantering AB) tested the suitability a new LVDT-cell (Linear Variable Differential Transducer cell) to measure the induced stresses in the vicinity of an excavated surface and further to use these results to interpret the in situ state of stress. It utilises the overcoring methodology, measuring the radial convergence of four diameters using eight LVDTs, and is similar in concept to the USBM-gauge. A 127 mm diameter pilot-hole is required and the overcore diameter is 200 mm. The minimum overcoring length is 350 mm, and hence a compact drill can be utilised. Extensive testing of the LVDT-cell shows it to be robust and suitable for use in an underground environment. Sensitivity tests also show that the cell can withstand a range of operating conditions and still provide acceptable results. The in situ stress at the measurement location can be solved by numerical inversion using the results of at least three overcoring measurements around the three-dimensional tunnel section. The large dimensions of the measurement tool and the ability to utilise multiple measurements at various locations in a tunnel section, provides flexibility in selecting an appropriate rock mass volume. Because the inversion technique relies on knowing the exact location of the measurements and the geometry profile of the tunnel, modern survey techniques such as Lidar or photogrammetric technology should be used. Checks using traditional surveying techniques should also be used to ensure adequate survey resolution, specially in case of sidecoring measurements. To evaluate the suitability of the LVDT-cell to provide the in situ state of stress, tests were carried out in the drill-and-blast TASS tunnel and TBM tunnel at the Aespoe Hard Rock Laboratory in Sweden. The state of stress established using the LVDT-cell was in agreement with the state of stress established previously using traditional overcoring and hydraulic fracturing methods. In this study, the

  5. In situ stress measurement with the new LVDT - Cell - method description and verification

    Energy Technology Data Exchange (ETDEWEB)

    Hakala, M. [KMS Hakala Oy, Nokia (Finland); Christiansson, R. [Svensk Kaernbraenslehantering AB, Stockholm (Sweden); Martin, D. [Univ. of Alberta, Edmonton (Canada); Siren, T.; Kemppainen, K.

    2013-11-15

    Posiva Oy and SKB (Svensk Kaernbraenslehantering AB) tested the suitability a new LVDT-cell (Linear Variable Differential Transducer cell) to measure the induced stresses in the vicinity of an excavated surface and further to use these results to interpret the in situ state of stress. It utilises the overcoring methodology, measuring the radial convergence of four diameters using eight LVDTs, and is similar in concept to the USBM-gauge. A 127 mm diameter pilot-hole is required and the overcore diameter is 200 mm. The minimum overcoring length is 350 mm, and hence a compact drill can be utilised. Extensive testing of the LVDT-cell shows it to be robust and suitable for use in an underground environment. Sensitivity tests also show that the cell can withstand a range of operating conditions and still provide acceptable results. The in situ stress at the measurement location can be solved by numerical inversion using the results of at least three overcoring measurements around the three-dimensional tunnel section. The large dimensions of the measurement tool and the ability to utilise multiple measurements at various locations in a tunnel section, provides flexibility in selecting an appropriate rock mass volume. Because the inversion technique relies on knowing the exact location of the measurements and the geometry profile of the tunnel, modern survey techniques such as Lidar or photogrammetric technology should be used. Checks using traditional surveying techniques should also be used to ensure adequate survey resolution, specially in case of sidecoring measurements. To evaluate the suitability of the LVDT-cell to provide the in situ state of stress, tests were carried out in the drill-and-blast TASS tunnel and TBM tunnel at the Aespoe Hard Rock Laboratory in Sweden. The state of stress established using the LVDT-cell was in agreement with the state of stress established previously using traditional overcoring and hydraulic fracturing methods. In this study, the

  6. A search for susceptibility loci for anorexia nervosa: methods and sample description.

    Science.gov (United States)

    Kaye, W H; Lilenfeld, L R; Berrettini, W H; Strober, M; Devlin, B; Klump, K L; Goldman, D; Bulik, C M; Halmi, K A; Fichter, M M; Kaplan, A; Woodside, D B; Treasure, J; Plotnicov, K H; Pollice, C; Rao, R; McConaha, C W

    2000-05-01

    Eating disorders have not traditionally been viewed as heritable illnesses; however, recent family and twin studies lend credence to the potential role of genetic transmission. The Price Foundation funded an international, multisite study to identify genetic factors contributing to the pathogenesis of anorexia nervosa (AN) by recruiting affective relative pairs. This article is an overview of study methods and the clinical characteristics of the sample. All probands met modified DSM-IV criteria for AN; all affected first, second, and third degree relatives met DSM-IV criteria for AN, bulimia nervosa (BN), or eating disorder not otherwise specified (NOS). Probands and affected relatives were assessed diagnostically with the Structured Interview for Anorexia and Bulimia. DNA was collected from probands, affected relatives and a subset of their biological parents. Assessments were obtained from 196 probands and 237 affected relatives, over 98% of whom are of Caucasian ancestry. Overall, there were 229 relative pairs who were informative for linkage analysis. Of the proband-relative pairs, 63% were AN-AN, 20% were AN-BN, and 16% were AN-NOS. For family-based association analyses, DNA has been collected from both biological parents of 159 eating-disordered subjects. Few significant differences in demographic characteristics were found between proband and relative groups. The present study represents the first large-scale molecular genetic investigation of AN. Our successful recruitment of over 500 subjects, consisting of affected probands, affected relatives, and their biological parents, will provide the basis to investigate genetic transmission of eating disorders via a genome scan and assessment of candidate genes.

  7. Relationships of Indoor, Outdoor, and Personal Air (RIOPA). Part I. Collection methods and descriptive analyses.

    Science.gov (United States)

    Weisel, Clifford P; Zhang, Junfeng; Turpin, Barbara J; Morandi, Maria T; Colome, Steven; Stock, Thomas H; Spektor, Dalia M; Korn, Leo; Winer, Arthur M; Kwon, Jaymin; Meng, Qing Yu; Zhang, Lin; Harrington, Robert; Liu, Weili; Reff, Adam; Lee, Jong Hoon; Alimokhtari, Shahnaz; Mohan, Kishan; Shendell, Derek; Jones, Jennifer; Farrar, L; Maberti, Slivia; Fan, Tina

    2005-11-01

    This study on the relationships of indoor, outdoor, and personal air (RIOPA) was undertaken to collect data for use in evaluating the contribution of outdoor sources of air toxics and particulate matter (PM) to personal exposure. The study was not designed to obtain a population-based sample, but rather to provide matched indoor, outdoor, and personal concentrations in homes that varied in their proximity to outdoor pollution sources and had a wide range of air exchange rates (AERs). This design allowed examination of relations among indoor, outdoor, and personal concentrations of air toxics and PM across a wide range of environmental conditions; the resulting data set obtained for a wide range of environmental pollutants and AERs can be used to evaluate exposure models. Approximately 100 households with residents who do not smoke participated in each of three cities in distinct locations expected to have different climates and housing characteristics: Elizabeth, New Jersey; Houston, Texas; and Los Angeles County, California. Questionnaires were administered to characterize homes, neighborhoods, and personal activities that might affect exposures. The concentrations of a suite of volatile organic compounds (VOCs) and carbonyl compounds, as well as the fraction of airborne particulate matter with a mass median aerodynamic diameter personal air samples were collected simultaneously. During the same 48-hour period, the AER (exchanges/hr; x hr(-1)) was determined in each home, and carbonyl compounds were measured inside vehicle cabins driven by a subset of the participants. In most of the homes, measurements were made twice, during two different seasons, to obtain a wide distribution of AERs. This report presents in detail the data collection methods, quality control measures, and initial analyses of data distributions and relations among indoor, outdoor, and personal concentrations. The results show that indoor sources dominated personal and indoor air concentrations

  8. Exploration of consumer perception of Sauvignon Blanc wines with enhanced aroma properties using two different descriptive methods.

    Science.gov (United States)

    Lezaeta, Alvaro; Bordeu, Edmundo; Næs, Tormod; Varela, Paula

    2017-09-01

    The aim of this study was to evaluate consumers' perception of a complex set of stimuli as aromatically enriched wines. For that, two consumer based profiling methods were compared, concurrently run with overall liking measurements: projective mapping based on choice or preference (PM-C), a newly proposed method, and check-all-that-apply (CATA) questions with an ideal sample, a more established, consumer-based method for product optimization. Reserve bottling and regular bottling of Sauvignon Blanc wines from three wineries were aromatically enriched with natural aromas collected by condensation during wine fermentation. A total of 144 consumers were enrolled in the study. The results revealed that both consumer-based highlighted the positive effect of aromatic enrichment on consumer perception and acceptance. However, PM-C generated a very detailed description, in which consumers focused less on the sensory aspects and more on the usage, attitudes, and reasons behind their choices. Providing a deeper understanding of the drivers of liking/disliking of enriched Sauvignon Blanc wines. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. An Authorization Logic with Explicit Time

    Science.gov (United States)

    2008-02-02

    that η-logic can be used in specifying the behavior of systems with time-dependent authorization policies. In such cases, the logic can be used to...10(4):265– 310, November 1992. [26] Christopher Lesniewski-Laas, Bryan Ford, Jacob Strauss, M. Frans Kaashoek, and Robert Morris. Alpaca : extensible

  10. A two-column formalism for time-dependent modelling of stellar convection. I. Description of the method

    Science.gov (United States)

    Stökl, A.

    2008-11-01

    Context: In spite of all the advances in multi-dimensional hydrodynamics, investigations of stellar evolution and stellar pulsations still depend on one-dimensional computations. This paper devises an alternative to the mixing-length theory or turbulence models usually adopted in modelling convective transport in such studies. Aims: The present work attempts to develop a time-dependent description of convection, which reflects the essential physics of convection and that is only moderately dependent on numerical parameters and far less time consuming than existing multi-dimensional hydrodynamics computations. Methods: Assuming that the most extensive convective patterns generate the majority of convective transport, the convective velocity field is described using two parallel, radial columns to represent up- and downstream flows. Horizontal exchange, in the form of fluid flow and radiation, over their connecting interface couples the two columns and allows a simple circulating motion. The main parameters of this convective description have straightforward geometrical meanings, namely the diameter of the columns (corresponding to the size of the convective cells) and the ratio of the cross-section between up- and downdrafts. For this geometrical setup, the time-dependent solution of the equations of radiation hydrodynamics is computed from an implicit scheme that has the advantage of being unaffected by the Courant-Friedrichs-Lewy time-step limit. This implementation is part of the TAPIR-Code (short for The adaptive, implicit RHD-Code). Results: To demonstrate the approach, results for convection zones in Cepheids are presented. The convective energy transport and convective velocities agree with expectations for Cepheids and the scheme reproduces both the kinetic energy flux and convective overshoot. A study of the parameter influence shows that the type of solution derived for these stars is in fact fairly robust with respect to the constitutive numerical

  11. METHODS FOR DESCRIPTION OF EDUCATION AND SCIENTIFIC SERVICES IN INFORMATION AND EDUCATION ON THE BASIS OF INTEROPERABILITY STACK EIF

    Directory of Open Access Journals (Sweden)

    Ekaterina V. Pavlova

    2015-01-01

    Full Text Available The article deals with methodology for description of scientifi c and educational services in education and information on the basis of interoperability stack EIF (European Interoperability Framework. The passage describes operation factors to depict services on every level of the methodology, tools used to describe the services and the content. We also provide the link between methodology of description with the life span of the service. The article presents an example of service description according to the methodology considering the current education and professional standards, ITIL recommendations, ontology on the OWL basis and WSDL-description

  12. Sexual and Reproductive Health Needs of HIV-Positive People in Tehran, Iran: A Mixed-Method Descriptive Study

    Directory of Open Access Journals (Sweden)

    Saharnaz Nedjat

    2015-09-01

    Full Text Available Background People Living with HIV (PLHIV are highly stigmatized and consequently hard-to-access by researchers and importantly, public health outreach in Iran, possibly due to the existing socio-cultural situation in this country. The present study aimed to evaluate the sexual and reproductive health needs of PLHIV in Tehran, the capital of Iran. Methods As a mixed-method descriptive study, this project was conducted in 2012 in Tehran, Iran. In this study, we evaluated and discussed socio-demographic characteristics, family and social support, sexual behaviors, fertility desires and needs, PMTCT services, contraceptive methods, unintended pregnancy and safe abortion, and Pap smear tests among 400 participants referring to the behavioral disorders consulting centers. Results Of the sample 240 (60% were male and 160 (40% were female. About 50% of women and 40% of men were 25-34 years old. More than 60% of men and 96% of women were married, while more than 50% of the participants had HIV-positive spouses at the time of study. According to the results, fertility desire was observed among more than 30% of female and 40% of male participants. Results of the in-depth interviews indicate that the participants are not satisfied with most of the existing services offered to address their sexual and reproductive health needs. Conclusion Despite the availability of services, most of sexual and reproductive health needs of the PLHIV are overlooked by the health system in Iran. Paying attention to sexual and reproductive health needs of PLHIV in Iran not only protects their right to live long and healthy lives, but also may prevent the transmission of HIV from the patients to others within the community.

  13. Tight Binding methods in quantum transport through molecules and small devices: from the coherent to the incoherent description

    Energy Technology Data Exchange (ETDEWEB)

    Pastawaski, Horacio M. [Universidad Nacional de Cordoba, Cordoba (Argentina); Medina, Ernesto [Instituto Venezolano de Investigaciones Cientificas, Caracas (Venezuela)

    2001-03-01

    We discuss the steady-state electronic transport in solid-state and molecular devices in the quantum regime. The decimation technique allows a comprehensive description of the electronic structure. Such a method is used, in conjunction with the generalizations of Landauer's tunneling formalism, to describe a wide range of transport regimes. We analyze mesoscopic and semiclassical metallic transport, the metal-insulator transition, and the resonant tunneling regime. The effects of decoherence on transport is discussed in terms of the D' Amato-Pastawski model. A brief presentation of the time dependent phenomena is also included. [Spanish] Se discuten el transporte, en el estado estacionario, en dispositivos moleculares y de estado solido en el regimen cuantico. La tecnica de decimacion permite una descripcion completa de la estructura electronica. Tal metodo, en conjunto con la generalizacion del formalismo de Landauer, puede ser usado para describir un rango amplio de regimenes de transporte. Se analizan el transporte mesoscopico y semiclasico en el regimen metalico, la transicion metal-aislante, y el regimen de tunel resonante. Los efectos de decoherencia en el transporte son tratados en terminos de modelos de D'amato-Pastawski. Finalmente se incluye una breve presentacion de fenomenos dependientes del tiempo.

  14. Inventory of greenhouse gases at the municipality level. Description of calculation methods; Denmark; Drivhusgasopgoerelse paa kommuneniveau. Beskrivelse af beregningsmetoder

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Ole-Kenneth; Winther, M.; Gyldenkaerne, S.; Lyck, E.; Thomsen, Marianne; Hoffmann, L.; Fauser, P.

    2009-02-15

    This report includes a description of methodologies, data and algorithms behind the inventories of greenhouse gases at the municipality level divided into sectors. The starting point for the sectors in this report is the sectors used for the official Danish emission inventories. A simplified generalization of the equations used in emission calculations is based on the assumption that emissions of a given activity is estimated using data descriptive for the size of the activity multiplied by an emission factor pr unit of activity. Emissions of CH{sub 4} and N{sub 2}O are converted to CO{sub 2} equivalents. In this project this generalization and these conversions are also the basis for all methodologies. The sectors included in this report are: the collective power and heating, individual heating, mobile sources, transportation and machinery, industrial processes, solvents, agriculture, land use and waste depositing and wastewater. The methods include calculations of the greenhouse gases that are most important for the sectors. The importance is estimated from the national emission inventory. This report covers methodologies for the greenhouse gases CO{sub 2}, CH{sub 4} and N{sub 2}O. Due to the mentioned importance criteria for some sectors not all greenhouse gases are included. As for the national inventories the calculation is built into several levels (Tiers) with increased requirements for municipalities regarding data. Tier 1 is mainly based on the Danish national greenhouse gas inventory data using appropriate distribution keys for a given activity into municipality level. Tier 2 is more detailed and includes emission factors used in the Danish national greenhouse gas inventories, for some sectors the emission factors are aggregated, while municipalities can enter their own activity data. At Tier 3, which is the most detailed level, there is - for some sectors - the opportunity to enter municipality specific emission factors and activity data. For other

  15. Pain control methods in use and perceived effectiveness by patients with Ehlers-Danlos syndrome: a descriptive study.

    Science.gov (United States)

    Arthur, Karen; Caldwell, Karen; Forehand, Samantha; Davis, Keith

    2016-01-01

    The purpose of this study was to assess the pain control methods in use by patients who have Ehlers-Danlos Syndrome (EDS), a group of connective tissue disorders, and their perceived effectiveness. This descriptive study involved 1179 adults diagnosed with EDS who completed an anonymous on-line survey. The survey consisted of demographics information, the Patient Reported Outcomes Measurement Information System (PROMIS) Pain-Behavior, PROMIS Pain-Interference, and Neuro QOL Satisfaction with Social Roles and Activities scales, as well as a modified version of the Pain Management Strategies Survey. Respondents reported having to seek out confirmation of their EDS diagnosis with multiple healthcare providers, which implies the difficulty many people with EDS face when trying to gain access to appropriate treatment. Patients with EDS experience higher levels of pain interference and lower satisfaction with social roles and activities compared to national norms. Among the treatment modalities in this study, those perceived as most helpful for acute pain control were opioids, surgical interventions, splints and braces, avoidance of potentially dangerous activities and heat therapy. Chronic pain treatments rated as most helpful were opioids, splints or braces and surgical interventions. For methods used for both acute and chronic pain, those perceived as most helpful were opioids, massage therapies, splints or braces, heat therapy and avoiding potentially dangerous activities. EDS is a complex, multi-systemic condition that can be difficult to diagnose and poses challenges for healthcare practitioners who engage with EDS patients in holistic care. Improved healthcare provider knowledge of EDS is needed, and additional research on the co-occurring diagnoses with EDS may assist in comprehensive pain management for EDS patients. Ehlers-Danlos Syndrome (EDS) is a group of connective tissue disorders associated with defective production of collagen, which can dramatically

  16. Description of a satellite experiment for isotopic-composition measurement of cosmic nuclei by the slowing-down method

    International Nuclear Information System (INIS)

    Bouffard, M.; Engelmann, J.

    1975-01-01

    Two possible versions of an experiment for launch aboard an ESRO free-flyer spacecraft in the 1980's are described. All the data quoted are, of course, preliminary. They may be used only as a basis for discussion although they are derived from well-known balloon hardware. The telescope arrangement, the description of counter, drift chamber and electronics are given [fr

  17. Descriptive Qualitative Method of Evaluation from the Viewpoint of Math Teachers and Its Comparison with the Quantitative Evaluation (Giving scores) Method (A Case Study on the Primary Schools for Girls in Zone 1 of Tehran City)

    OpenAIRE

    Farnaz Ostad-Ali; Mohammad Hasan Behzadi; Ahmad Shahvarani

    2015-01-01

    In recent years, one of the most important developments which have been taking place in the primary school education system is the development of the qualitative-descriptive method of evaluating the students' achievements. The main goals of the qualitative-descriptive evaluation are improving the quality of learning and promoting the level of mental health in teaching-learning environments. Therefore, based on the the raised hypothesis, the purpose of this study is to investigate the teachers...

  18. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  19. The use of qualitative methods in developing the descriptive systems of preference-based measures of health-related quality of life for use in economic evaluation.

    Science.gov (United States)

    Stevens, Katherine; Palfreyman, Simon

    2012-12-01

    To describe how qualitative methods can be used in the development of descriptive systems of preference-based measures (PBMs) of health-related quality of life. The requirements of the National Institute for Health and Clinical Excellence and other agencies together with the increasing use of patient-reported outcome measures has led to an increase in the demand for PBMs. Recently, interest has grown in developing new PBMs and while previous research on PBMs has mainly focused on the methods of valuation, research into the methods of developing descriptive systems is an emerging field. Traditionally, descriptive systems of PBMs were developed by using top-down methods, where content was derived from existing measures, the literature, or health surveys. A contrasting approach is a bottom-up methodology, which takes the views of patients or laypeople on how their life is affected by their health. This approach generally requires the use of qualitative methods. Qualitative methods lend themselves well to the development of PBMs. They also ensure that the measure has appropriate language, content validity, and responsiveness to change. While the use of qualitative methods in the development of non-PBMs is fairly standard, their use in developing PBMs was until recently nonexistent. In this article, we illustrate the use of qualitative methods by presenting two case studies of recently developed PBMs, one generic and one condition specific. We outline the stages involved, discuss the strengths and weaknesses of the approach, and compare with the top-down approach used in the majority of PBMs to date. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  20. [Methodology of the description of atmospheric air pollution by nitrogen dioxide by land use regression method in Ekaterinburg].

    Science.gov (United States)

    Antropov, K M; Varaksin, A N

    2013-01-01

    This paper provides the description of Land Use Regression (LUR) modeling and the result of its application in the study of nitrogen dioxide air pollution in Ekaterinburg. The paper describes the difficulties of the modeling for air pollution caused by motor vehicles exhaust, and the ways to address these challenges. To create LUR model of the NO2 air pollution in Ekaterinburg, concentrations of NO2 were measured, data on factors affecting air pollution were collected, a statistical analysis of the data were held. A statistical model of NO2 air pollution (coefficient of determination R2 = 0.70) and a map of pollution were created.

  1. [Biometric method for the description of the head of an unrecognized corpse for the purpose of personality individualization and identification].

    Science.gov (United States)

    Zviagin, V N; Galitskaia, O I; Negasheva, M A

    2012-01-01

    We have determined absolute dimensions of the head and the relationship between the dimensions of its selected parts. The study enrolled adult subjects (mostly of Russian ethnicity) at the age from 17 to 22 years (1108 men and 1153 women). We calculated the normal values for the estimation of real dimensional characteristics and the frequency of their occurrence in the population. The proposed approach makes it possible to reliably identify the dimensional features of human appearance in terms of the quantitative verbal description (categories 1-5) and to reveal its most characteristic features. The results of this biometric study of the heads of unrecognized corpses obtained by the specially developed technology may be used in operational and search investigations, in the procedure of corpse identification, and forensic medical personality identification of a missing subject.

  2. Descriptive statistics.

    Science.gov (United States)

    Nick, Todd G

    2007-01-01

    Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

  3. Description of an identification method of thermocouple time constant based on application of recursive numerical filtering to temperature fluctuation

    International Nuclear Information System (INIS)

    Bernardin, B.; Le Guillou, G.; Parcy, JP.

    1981-04-01

    Usual spectral methods, based on temperature fluctuation analysis, aiming at thermocouple time constant identification are using an equipment too much sophisticated for on-line application. It is shown that numerical filtering is optimal for this application, the equipment is simpler than for spectral methods and less samples of signals are needed for the same accuracy. The method is described and a parametric study was performed using a temperature noise simulator [fr

  4. Rapid review programs to support health care and policy decision making: a descriptive analysis of processes and methods.

    Science.gov (United States)

    Polisena, Julie; Garritty, Chantelle; Kamel, Chris; Stevens, Adrienne; Abou-Setta, Ahmed M

    2015-03-14

    Health care decision makers often need to make decisions in limited timeframes and cannot await the completion of a full evidence review. Rapid reviews (RRs), utilizing streamlined systematic review methods, are increasingly being used to synthesize the evidence with a shorter turnaround time. Our primary objective was to describe the processes and methods used internationally to produce RRs. In addition, we sought to understand the underlying themes associated with these programs. We contacted representatives of international RR programs from a broad realm in health care to gather information about the methods and processes used to produce RRs. The responses were summarized narratively to understand the characteristics associated with their processes and methods. The summaries were compared and contrasted to highlight potential themes and trends related to the different RR programs. Twenty-nine international RR programs were included in our sample with a broad organizational representation from academia, government, research institutions, and non-for-profit organizations. Responses revealed that the main objectives for RRs were to inform decision making with regards to funding health care technologies, services and policy, and program development. Central themes that influenced the methods used by RR programs, and report type and dissemination were the imposed turnaround time to complete a report, resources available, the complexity and sensitivity of the research topics, and permission from the requestor. Our study confirmed that there is no standard approach to conduct RRs. Differences in processes and methods across programs may be the result of the novelty of RR methods versus other types of evidence syntheses, customization of RRs for various decision makers, and definition of 'rapid' by organizations, since it impacts both the timelines and the evidence synthesis methods. Future research should investigate the impact of current RR methods and reporting to

  5. Under-triage in telephone consultation is related to non-normative symptom description and interpersonal communication: a mixed methods study.

    Science.gov (United States)

    Gamst-Jensen, Hejdi; Lippert, Freddy K; Egerod, Ingrid

    2017-05-15

    Telephone consultation and triage are used to limit the workload on emergency departments. Lack of visual cues and clinical tests put telephone consultations to a disadvantage compared to face-to-face consultations increasing the risk of under-triage. Under-triage occurs in telephone triage; however why under-triage happens is not explored yet. The aim of the study was to describe situations of under-triage in context, to assess the quality of under-triaged calls, and to identify communication patterns contributing to under-triage in a regional OOH service in the capital region of Denmark. Explanatory simultaneous mixed method with thematic analysis and descriptive statistics was chosen. The study was carried out in an Out-Of-Hours service (OOH) in the Capital Region of Denmark, Copenhagen. Under-triage was defined as Potentially Under-Triaged Calls (PUTC) by specific criteria to an OOH Hotline, and identification by integration of three databases: Medical Hotline database, Emergency number database, including the Ambulance database, and electronic patient records. Distribution of PUTC were carried out using ICD-10 codes to identify diagnosis and main themes identified by qualitative analysis of audio recorded under-triaged calls. Study period was October 15 th to November 30 th 2014. Three hundred twenty seven PUTC were identified, representing 0.04% of all calls (n = 937.056) to the OOH. Distribution of PUTC according to diagnoses was: digestive (24%), circulatory (19%), respiratory (15%) and all others (42%). Thematic analysis of the voice logs suggested that inadequate communication and non-normative symptom description contributed to under-triage. The incidence of potentially under-triage is low (0.04%). However, the over-representation of digestive, circulatory, and respiratory diagnoses might suggest that under-triage is related to inadequate symptom description. We recommend that caller and call-handler collaborate systematically on problem

  6. Association between traditional oral hygiene methods with tooth wear, gingival bleeding, and recession: A descriptive cross-sectional study.

    Science.gov (United States)

    Shah, Naseem; Mathur, Vijay Prakash; Jain, Veena; Logani, Ajay

    2018-01-01

    Oral hygiene maintenance is crucial for prevention of various oral diseases. Oral hygiene practices across the country vary largely and people in peri-urban and rural areas use traditional methods of oral hygiene like powders, bark, oil and salt etc. Their effect on oral soft and hard tissues need to be studied to understand their beneficial and/ or harmful effects on maintenance of oral hygiene and prevention or causation of oral diseases. This study aimed to assess the plaque-cleaning efficacy, gingival bleeding, recession and tooth wear with different traditional oral hygiene methods as compared to use of toothpaste-toothbrush, the most accepted method of oral hygiene practice. Hospital based cross sectional analytical study. Results: Total 1062 traditional oral hygiene method users were compared with same number of toothpaste-brush users. The maximum number in the former group used tooth powder (76%) as compared to other indigenous methods, such as use of bark of trees etc and out of tooth powder users; almost 75% reported using red toothpowder. The plaque scores and gingival bleeding & recession were found to be more in traditional oral hygiene method users. The toothwear was also more severe among the toothpowder users. Traditional methods were found to be inferior in plaque control as was documented by increased bleeding and gingival recession. Its effect on hard tissues of teeth was very damaging with higher tooth wear scores on all surfaces.

  7. Comparative description of the use of modern methods of hormonal contraception for women with excessive body mass

    Directory of Open Access Journals (Sweden)

    I. B. Gridina

    2016-04-01

    Full Text Available Maintenance of reproductive health of women with excessive weight is the actual problem of nowadays and is an important direction of modern medicine. Aim. To analyze the efficiency and acceptability of oral, іntravaginal and transdermal hormonal contraceptives among women with excessive body mass. Methods and results. The tolerability and ease of use of different types of hormonal contraception have been studied in 72 women with excessive body mass to determine the reliability and acceptability of modern hormonal contraceptives. It has been investigated that the effectiveness of hormonal contraceptives according to our data is 100%, none patient was registered with an unwanted pregnancy. The total subjective evaluation of all hormonal contraceptives use were positive: 78.6% of women with excessive body mass who used oral contraceptives, were satisfied with the chosen contraceptive method, 81,8% – were satisfied with intravaginal method, 59,1% – transdermal contraceptive. Conclusions. It has been found that intravaginal contraceptive is most suitable as the drug of first choice for women with overweight compared with oral and transdermal hormonal methods of contraception. This suggests that women with excessive body mass can successfully use modern methods of hormonal contraception. But it is necessary to carry out clinical supervision, during which further clarification on the use of hormonal contraception in women with excessive body mass is possible.

  8. Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

    Science.gov (United States)

    Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

    2008-12-15

    Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

  9. Identifying What Student Affairs Professionals Value: A Mixed Methods Analysis of Professional Competencies Listed in Job Descriptions

    Science.gov (United States)

    Hoffman, John L.; Bresciani, Marilee J.

    2012-01-01

    This mixed method study explored the professional competencies that administrators expect from entry-, mid-, and senior-level professionals as reflected in 1,759 job openings posted in 2008. Knowledge, skill, and dispositional competencies were identified during the qualitative phase of the study. Statistical analysis of the prevalence of…

  10. Description and pilot results from a novel method for evaluating return of incidental findings from next-generation sequencing technologies.

    Science.gov (United States)

    Goddard, Katrina A B; Whitlock, Evelyn P; Berg, Jonathan S; Williams, Marc S; Webber, Elizabeth M; Webster, Jennifer A; Lin, Jennifer S; Schrader, Kasmintan A; Campos-Outcalt, Doug; Offit, Kenneth; Feigelson, Heather Spencer; Hollombe, Celine

    2013-09-01

    The aim of this study was to develop, operationalize, and pilot test a transparent, reproducible, and evidence-informed method to determine when to report incidental findings from next-generation sequencing technologies. Using evidence-based principles, we proposed a three-stage process. Stage I "rules out" incidental findings below a minimal threshold of evidence and is evaluated using inter-rater agreement and comparison with an expert-based approach. Stage II documents criteria for clinical actionability using a standardized approach to allow experts to consistently consider and recommend whether results should be routinely reported (stage III). We used expert opinion to determine the face validity of stages II and III using three case studies. We evaluated the time and effort for stages I and II. For stage I, we assessed 99 conditions and found high inter-rater agreement (89%), and strong agreement with a separate expert-based method. Case studies for familial adenomatous polyposis, hereditary hemochromatosis, and α1-antitrypsin deficiency were all recommended for routine reporting as incidental findings. The method requires definition of clinically actionable incidental findings and provide documentation and pilot testing of a feasible method that is scalable to the whole genome.

  11. Identification and epidemiological typing of Campylobacter hyointestinalis subspecies by phenotypic and genotypic methods and description of novel subgroups

    DEFF Research Database (Denmark)

    On, Stephan L.W.; Vandamme, P.

    1997-01-01

    of this taxon. Two novel, distinct groups of C. hyointestinalis-like bacteria, originally isolated from the cloacae of Canada geese and human diarrhoeic stools, were also identified by each of the methods used. This appears to be the first report confirming the presence of C. hyointestinalis-like strains from...

  12. Successfully recruiting, surveying, and retaining college students: a description of methods for the Risk, Religiosity, and Emerging Adulthood Study.

    Science.gov (United States)

    Berry, Devon M; Bass, Colleen P

    2012-12-01

    The selection of methods that purposefully reflect the norms of the target population increases the likelihood of effective recruitment, data collection, and retention. In the case of research among college students, researchers' appreciation of college student norms might be skewed by unappreciated generational and developmental differences. Our purpose in this article is to illustrate how attention to the generational and developmental characteristics of college students enhanced the methods of the Risk, Religiosity, and Emerging Adulthood study. We address the following challenges related to research with college students: recruitment, communication, data collection, and retention. Solutions incorporating Internet-based applications (e.g., Facebook) and sensitivity to the generational norms of participants (e.g., multiple means of communication) are described in detail. Copyright © 2012 Wiley Periodicals, Inc.

  13. Descriptive sensory analysis in different classes of orange juice by a robust free-choice profile method.

    Science.gov (United States)

    Pérez Aparicio, Jesús; Toledano Medina, M Angeles; Lafuente Rosales, Victoria

    2007-07-09

    Free-choice profile (FCP), developed in the 1980s, is a sensory analysis method that can be carried out by untrained panels. The participants need only to be able to use a scale and be consumers of the product under evaluation. The data are analysed by sophisticated statistical methodologies like Generalized Procrustean Analysis (GPA) or STATIS. To facilitate a wider use of the free-choice profiling procedure, different authors have advocated simpler methods based on principal components analysis (PCA) of merged data sets. The purpose of this work was to apply another easy procedure to this type of data by means of a robust PCA. The most important characteristic of the proposed method is that quality responsible managers could use this methodology without any scale evaluation. Only the free terms generated by the assessors are necessary to apply the script, thus avoiding the error associated with scale utilization by inexpert assessors. Also, it is possible to use the application with missing data and with differences in the assessors' attendance at sessions. An example was performed to generate the descriptors from different orange juice types. The results were compared with the STATIS method and with the PCA on the merged data sets. The samples evaluated were fresh orange juices with differences in storage days and pasteurized, concentrated and orange nectar drinks from different brands. Eighteen assessors with a low-level training program were used in a six-session free-choice profile framework. The results proved that this script could be of use in marketing decisions and product quality program development.

  14. Description of an Advantageous Optical Label-Free Biosensing Interferometric Read-Out Method to Measure Biological Species

    Directory of Open Access Journals (Sweden)

    Miguel Holgado

    2014-02-01

    Full Text Available In this article we report a new, simple, and reliable optical read-out detection method able to assess Rotavirus present in human sera as well as in the viral pollution sources. It is based on the interference of two interferometers used as biophotonic transducers. The method significantly improves the optical label-free biosensing response measuring both, the concentration of the AgR and its corresponding size. Two different immunoassays were carried out: Bovine Serum Albumin (BSA, and the recognition by its antibody (anti-BSA; and Rotavirus (AgR and the recognition by its antibody (anti-AgR. In the cases studied, and using as model interferometer a simple Fabry-Perot transducer, we demonstrate a biosensing enhancement of two orders of magnitude in the Limit of Detection (LoD. In fact, this read-out optical method may have significant implications to enhance other optical label-free photonic transducers reported in the scientific literature.

  15. Improved Bone Graft Method for Upper Cervical Surgery with Posterior Approach: Technical Description and Report of 52 Cases.

    Science.gov (United States)

    Wang, Yong-Li; Wang, Xiang-Yang

    2018-02-21

    We sought to report a minimum 12 months' follow-up results of our improved bone graft method for upper cervical surgery with the posterior approach. Among 52 consecutive cases, odontoid nonunion occurred in 33 patients, atlantoaxial instability in 11 patients, and occipitocervical deformity in 8 patients who underwent posterior C1-C2 transarticular screw/screw-rod internal fixation (41 cases) and occipitocervical fusion (11 cases) with the improved bone graft technique. Each surgical procedure was performed by the same senior spine surgeon. We took lateral cervical standing roentgenograms before surgery and immediately after surgery. Then we conducted craniocerebral computed tomography examination with reconstruction at 3, 6, 12, and 24 months and annually thereafter. The postoperative follow-up times are about 12-38 months. All cases showed satisfactory screw fixation by radiographic examination, and there were no postoperative neurologic complications. One case had postoperative retropharyngeal infection after the transoral release and posterior reduction by pedicle screw instrumentation. All patients got solid fusions, and no pseudarthrosis occurred. All cases had solid fusions at the 3-month follow-up. Good bone graft bed, enough bone graft material, solid local fixation, and effective bone graft method are prerequisites for a successful bone graft. By analyzing postoperative follow-up in the consecutive cases in this study, our bone graft method describing a new bone graft structure is a reliable posterior fusion technique. It is worth considering, and further research is needed. Copyright © 2018. Published by Elsevier Inc.

  16. "Focused introspection" during naturally increased diuresis: description and repeatability of a method to study bladder sensation non-invasively.

    Science.gov (United States)

    De Wachter, Stefan G G; Heeringa, Rhea; Van Koeveringe, Gommert A; Winkens, Bjorn; Van Kerrebroeck, Philip E V; Gillespie, James I

    2014-06-01

    To present and describe a non-invasive method to study the origin and development of bladder filling sensation and to evaluate the repeatability of the method. Eighteen volunteers participated in the study and were given a water loading protocol consisting of 1,000 ml water intake 1 hr before the session and 200 ml every 10 min during the session. Protocol 1: To evaluate diuresis rate, seven participants were asked to void every 15 min and the voided volume was measured. Protocol 2: Eleven volunteers graded bladder sensation on regular time points, on an empty graph with time on the X-axis and intensity of sensation on the Y-axis. The protocol ended at absolute need to void (maximal intensity) and voided volumes were measured. This protocol was conducted three times with a 10 days interval. Protocol 1: The diuresis rate was not different during the sessions and showed no variation over the studied time period (P = 0.2). Protocol 2: For an individual, the diuresis rate was not different between the sessions. The curves in all patients showed a continuously increasing bladder intensity. In seven participants the curve was convex, in the other four, the curve was sigmoidal. For each individual the pattern was constant during the three sessions. A strict water loading protocol induces a constant diuresis. This allows individuals to draw an introspection bladder sensation curve with a specific shape, which can be used as a method to study the development of bladder sensation non-invasively. © 2013 Wiley Periodicals, Inc.

  17. Contribution of temporal dominance of sensations method to the sensory description of taste properties of commercial green tea brands

    Directory of Open Access Journals (Sweden)

    Noémi Dubová

    2013-03-01

    Full Text Available This paper aims to investigate the most dominant taste attributes of green tea samples in panelists perception over time. In order to assess the samples, a brand new method of sensory evaluation called „Temporal Dominance of Sensations“ was used. The five commercial green tea brands were evaluated by eight trained panelists (students. For each sample of green tea, curves of the dominance of each attribute over time were computed. The TDS curves provided information about the sequence of attributes that were dominant during degustation. This methodology was useful to characterize taste properties of green tea samples.doi:10.5219/274 Normal 0 false false false EN-US X-NONE X-NONE This paper aims to investigate the most dominant taste attributes of green tea samples in panelists perception over time. In order to assess the samples, a brand new method of sensory evaluation called „Temporal Dominance of Sensations“ was used. The five commercial green tea brands were evaluated by eight trained panelists (students. For each sample of green tea, curves of the dominance of each attribute over time were computed. The TDS curves provided information about the sequence of attributes that were dominant during degustation. This methodology was useful to characterize taste properties of green tea samples.doi:10.5219/274

  18. A simple method of measuring tibial tubercle to trochlear groove distance on MRI: description of a novel and reliable technique.

    Science.gov (United States)

    Camp, Christopher L; Heidenreich, Mark J; Dahm, Diane L; Bond, Jeffrey R; Collins, Mark S; Krych, Aaron J

    2016-03-01

    Tibial tubercle-trochlear groove (TT-TG) distance is a variable that helps guide surgical decision-making in patients with patellar instability. The purpose of this study was to compare the accuracy and reliability of an MRI TT-TG measuring technique using a simple external alignment method to a previously validated gold standard technique that requires advanced software read by radiologists. TT-TG was calculated by MRI on 59 knees with a clinical diagnosis of patellar instability in a blinded and randomized fashion by two musculoskeletal radiologists using advanced software and by two orthopaedists using the study technique which utilizes measurements taken on a simple electronic imaging platform. Interrater reliability between the two radiologists and the two orthopaedists and intermethods reliability between the two techniques were calculated using interclass correlation coefficients (ICC) and concordance correlation coefficients (CCC). ICC and CCC values greater than 0.75 were considered to represent excellent agreement. The mean TT-TG distance was 14.7 mm (Standard Deviation (SD) 4.87 mm) and 15.4 mm (SD 5.41) as measured by the radiologists and orthopaedists, respectively. Excellent interobserver agreement was noted between the radiologists (ICC 0.941; CCC 0.941), the orthopaedists (ICC 0.978; CCC 0.976), and the two techniques (ICC 0.941; CCC 0.933). The simple TT-TG distance measurement technique analysed in this study resulted in excellent agreement and reliability as compared to the gold standard technique. This method can predictably be performed by orthopaedic surgeons without advanced radiologic software. II.

  19. First step towards a non-adiabatic description of the fission process based on the Generator Coordinate Method

    Directory of Open Access Journals (Sweden)

    Lacroix D.

    2010-03-01

    Full Text Available Among the different theoretical approaches able to describe fission, microscopic ones can help us in the understanding of this process, as they have the advantage of describing the nuclear structure and the dynamics in a consistent manner. The sole input of the calculations is the nucleon-nucleon interaction. Such a microscopic time-dependent and quantum mechanical formalism has already been used, based on the Gaussian Overlap Approximation of the Generator Coordinate Method with the adiabatic approximation, to analyze the collective dynamics of low-energy fission in 238U [1]. However, at higher energies, a few MeV above the barrier, the adiabatic approximation doesn’t seem valid anymore. Indeed, manifestations of proton pair breaking have been observed in 238U and 239U for an excitation energy of 2.3 MeV above the barrier [2–4]. Taking the intrinsic excitations into account during the fission process will enable us to determine the coupling between collective and intrinsic degrees of freedom, in particular from saddle to scission. Guidelines of the new formalism under development are presented and some preliminary results on overlaps between non excited and excited states are discussed.

  20. "People like numbers": a descriptive study of cognitive assessment methods in clinical practice for Aboriginal Australians in the Northern Territory.

    Science.gov (United States)

    Dingwall, Kylie M; Pinkerton, Jennifer; Lindeman, Melissa A

    2013-01-31

    Achieving culturally fair assessments of cognitive functioning for Aboriginal people is difficult due to a scarcity of appropriately validated tools for use with this group. As a result, some Aboriginal people with cognitive impairments may lack fair and equitable access to services. The objective of this study was to examine current clinical practice in the Northern Territory regarding cognitive assessment for Aboriginal people thereby providing some guidance for clinicians new to this practice setting. Qualitative enquiry was used to describe practice context, reasons for assessment, and current practices in assessing cognition for Aboriginal Australians. Semi-structured interviews were conducted with 22 clinicians working with Aboriginal clients in central and northern Australia. Results pertaining to assessment methods are reported. A range of standardised tests were utilised with little consistency across clinical practice. Nevertheless, it was recognised that such tests bear severe limitations, requiring some modification and significant caution in their interpretation. Clinicians relied heavily on informal assessment or observations, contextual information and clinical judgement. Cognitive tests developed specifically for Aboriginal people are urgently needed. In the absence of appropriate, validated tests, clinicians have relied on and modified a range of standardised and informal assessments, whilst recognising the severe limitations of these. Past clinical training has not prepared clinicians adequately for assessing Aboriginal clients, and experience and clinical judgment were considered crucial for fair interpretation of test scores. Interpretation guidelines may assist inexperienced clinicians to consider whether they are achieving fair assessments of cognition for Aboriginal clients.

  1. First Step Towards a Non-Adiabatic Description of the Fission Process Based on the Generator Coordinate Method

    International Nuclear Information System (INIS)

    Bernard, R.; Goutte, H.; Gogny, D.; Dubray, N.; Lacroix, D.

    2009-01-01

    Among the different theoretical approaches able to describe fission, microscopic ones can help us in the understanding of this process, as they have the advantage of describing the nuclear structure and the dynamics in a consistent manner. The sole input of the calculations is the nucleon-nucleon interaction. Such a microscopic time-dependent and quantum mechanical formalism has already been used, based on the Gaussian Overlap Approximation of the Generator Coordinate Method with the adiabatic approximation, to analyze the collective dynamics of low-energy fission in 238 U. However, at higher energies, a few MeV above the barrier, the adiabatic approximation doesn't seem valid anymore. Indeed, manifestations of proton pair breaking have been observed in 238 U and 239 U for an excitation energy of 2.3 MeV above the barrier. Taking the intrinsic excitations into account during the fission process will enable us to determine the coupling between collective and intrinsic degrees of freedom, in particular from saddle to scission. Guidelines of the new formalism under development are presented and some preliminary results on overlaps between non excited and excited states are discussed.

  2. Nano-Evaluris: an inhalation and explosion risk evaluation method for nanoparticle use. Part I: description of the methodology

    Science.gov (United States)

    Bouillard, Jacques X.; Vignes, Alexis

    2014-02-01

    In this paper, an inhalation health and explosion safety risk assessment methodology for nanopowders is described. Since toxicological threshold limit values are still unknown for nanosized substances, detailed risk assessment on specific plants may not be carried out. A simple approach based on occupational hazard/exposure band expressed in mass concentrations is proposed for nanopowders. This approach is consolidated with an iso surface toxicological scaling method, which has the merit, although incomplete, to provide concentration threshold levels for which new metrological instruments should be developed for proper air monitoring in order to ensure safety. Whenever the processing or use of nanomaterials is introducing a risk to the worker, a specific nano pictogram is proposed to inform the worker. Examples of risk assessment of process equipment (i.e., containment valves) processing various nanomaterials are provided. Explosion risks related to very reactive nanomaterials such as aluminum nanopowders can be assessed using this new analysis methodology adapted to nanopowders. It is nevertheless found that to formalize and extend this approach, it is absolutely necessary to develop new relevant standard apparatuses and to qualify individual and collective safety barriers with respect to health and explosion risks. In spite of these uncertainties, it appears, as shown in the second paper (Part II) that health and explosion risks, evaluated for given MWCNTs and aluminum nanoparticles, remain manageable in their continuous fabrication mode, considering current individual and collective safety barriers that can be put in place. The authors would, however, underline that peculiar attention must be paid to non-continuous modes of operations, such as process equipment cleaning steps, that are often under-analyzed and are too often forgotten critical steps needing vigilance in order to minimize potential toxic and explosion risks.

  3. Quantitative Computed Tomography Ventriculography for Assessment and Monitoring of Hydrocephalus: A Pilot Study and Description of Method in Subarachnoid Hemorrhage.

    Science.gov (United States)

    Multani, Jasjit Singh; Oermann, Eric Karl; Titano, Joseph; Mascitelli, Justin; Nicol, Kelly; Feng, Rui; Skovrlj, Branko; Pain, Margaret; Mocco, J D; Bederson, Joshua B; Costa, Anthony; Shrivastava, Raj

    2017-08-01

    There is no facile quantitative method for monitoring hydrocephalus (HCP). We propose quantitative computed tomography (CT) ventriculography (qCTV) as a novel computer vision tool for empirically assessing HCP in patients with subarachnoid hemorrhage (SAH). Twenty patients with SAH who were evaluated for ventriculoperitoneal shunt (VPS) placement were selected for inclusion. Ten patients with normal head computed tomography (CTH) findings were analyzed as negative controls. CTH scans were segmented both manually and automatically (by qCTV) to generate measures of ventricular volume. The median manually calculated ventricular volume was 36.1 cm 3 (interquartile range [IQR], 30-115 cm 3 ), which was similar to the median qCTV measured volume of 37.5 cm 3 (IQR, 32-118 cm 3 ) (P = 0.796). Patients undergoing VPS placement demonstrated an increase in median ventricular volume on qCTV from 21 cm 3 to 40 cm 3 on day T-2 and to 51 cm 3 by day 0, a change of 144%. This is in contrast to patients who did not require shunting, in whom median ventricular volume decreased from 16 cm 3 to 14 cm 3 on day T-2 and to 13 cm 3 by day 0, with an average overall volume decrease 19% (P = 0.001). The average change in ventricular volume predicted which patients would require VPS placement, successfully identifying 7 of 10 patients (P = 0.004). Using an optimized cutoff of a change in ventricular volume of 2.5 cm 3 identified all patients who went on to require VPS placement (10 of 10; P = 0.011). qCTV is a reliable means of quantifying ventricular volume and hydrocephalus. This technique offers a new tool for monitoring neurosurgical patients for hydrocephalus, and may be beneficial for use in future research studies, as well as in the routine care of patients with hydrocephalus. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Plot Description (PD)

    Science.gov (United States)

    Robert E. Keane

    2006-01-01

    The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

  5. Quasi-homogenous approximation for description of the properties of dispersed systems. The basic approaches to model hardening processes in nanodispersed silica systems. Part 1. Statical polymer method

    Directory of Open Access Journals (Sweden)

    KUDRYAVTSEV Pavel Gennadievich

    2015-02-01

    Full Text Available The paper deals with possibilities to use quasi-homogenous approximation for discription of properties of dispersed systems. The authors applied statistical polymer method based on consideration of average structures of all possible macromolecules of the same weight. The equiations which allow evaluating many additive parameters of macromolecules and the systems with them were deduced. Statistical polymer method makes it possible to model branched, cross-linked macromolecules and the systems with them which are in equilibrium or non-equilibrium state. Fractal analysis of statistical polymer allows modeling different types of random fractal and other objects examined with the mehods of fractal theory. The method of fractal polymer can be also applied not only to polymers but also to composites, gels, associates in polar liquids and other packaged systems. There is also a description of the states of colloid solutions of silica oxide from the point of view of statistical physics. This approach is based on the idea that colloid solution of silica dioxide – sol of silica dioxide – consists of enormous number of interacting particles which are always in move. The paper is devoted to the research of ideal system of colliding but not interacting particles of sol. The analysis of behavior of silica sol was performed according to distribution Maxwell-Boltzmann and free path length was calculated. Using this data the number of the particles which can overcome the potential barrier in collision was calculated. To model kinetics of sol-gel transition different approaches were studied.

  6. Stability analysis of explicit entropy viscosity methods for non-linear scalar conservation equations

    KAUST Repository

    Bonito, Andrea; Guermond, Jean-Luc; Popov, Bojan

    2013-01-01

    We establish the L2-stability of an entropy viscosity technique applied to nonlinear scalar conservation equations. First-and second-order explicit time-stepping techniques using continuous finite elements in space are considered. The method

  7. Parents' knowledge, attitudes, use of pain relief methods and satisfaction related to their children's postoperative pain management: a descriptive correlational study.

    Science.gov (United States)

    Chng, Hui Yi; He, Hong-Gu; Chan, Sally Wai-Chi; Liam, Joanne Li Wee; Zhu, Lixia; Cheng, Karis Kin Fong

    2015-06-01

    To examine parents' knowledge about and attitudes towards pain management, use of pain relief strategies and satisfaction with their children's postoperative pain management, as well as the relationships among these variables. Children's postoperative pain is inadequately managed worldwide. Despite increasing emphasis on parental involvement in children's postoperative pain management, few studies have examined parents' management of their child's postoperative pain in Singapore. A descriptive correlational study. A convenience sample of 60 parents having 6- to 14-year-old children undergoing inpatient elective surgery in a public hospital in Singapore was recruited. Data were collected one day after each child's surgery using the Pain Management Knowledge and Attitudes questionnaire and the Parents' Use of Pain Relief Strategies questionnaire. Descriptive statistics, Mann-Whitney U tests, Kruskal-Wallis tests and Spearman's rank correlation coefficient were used for data analyses. Parents displayed moderate levels of knowledge, attitudes and use of pain relief methods in relation to their children's postoperative pain and pain management. They were generally satisfied with the management of their child's postoperative pain. There was significant difference in Parents' Use of Pain Relief Strategies scores between parents with and without previous experience of caring for their hospitalised child. Statistically significant positive correlations were found between parents' knowledge and attitude, knowledge and satisfaction, attitude and satisfaction, knowledge and pain relief strategies, as well as attitude and pain relief strategies. This study indicates the need to provide parents with more information regarding their children's postoperative pain management. Future studies are needed to develop educational interventions for parents to improve their knowledge and attitudes, which will eventually improve their use of pain relief strategies for their children. Health

  8. The X-Ray Pebble Recirculation Experiment (X-PREX): Facility Description, Preliminary Discrete Element Method Simulation Validation Studies, and Future Test Program

    International Nuclear Information System (INIS)

    Laufer, Michael R.; Bickel, Jeffrey E.; Buster, Grant C.; Krumwiede, David L.; Peterson, Per F.

    2014-01-01

    This paper presents a facility description, preliminary results, and future test program of the new X-Ray Pebble Recirculation Experiment (X-PREX), which is now operational and being used to collect data on the behavior of slow dense granular flows relevant to pebble bed reactor core designs. The X-PREX facility uses digital x-ray tomography methods to track both the translational and rotational motion of spherical pebbles, which provides unique experimental results that can be used to validate discrete element method (DEM) simulations of pebble motion. The validation effort supported by the X-PREX facility provides a means to build confidence in analysis of pebble bed configuration and residence time distributions that impact the neutronics, thermal hydraulics, and safety analysis of pebble bed reactor cores. Preliminary experimental and DEM simulation results are reported for silo drainage, a classical problem in the granular flow literature, at several hopper angles. These studies include conventional converging and novel diverging geometries that provide additional flexibility in the design of pebble bed reactor cores. Excellent agreement is found between the X-PREX experimental and DEM simulation results. Finally, this paper discusses additional studies in progress relevant to the design and analysis of pebble bed reactor cores including pebble recirculation in cylindrical core geometries and evaluation of forces on shut down blades inserted directly into a packed pebble bed. (author)

  9. Verification study on technology for site investigation for geological disposal. Confirmation of the applicability of survey methods through establishing site descriptive models in accordance with stepwise investigation approach

    International Nuclear Information System (INIS)

    Kondo, Hirofumi; Suzuki, Koichi; Hasegawa, Takuma; Hamada, Takaomi; Yoshimura, Kimitaka

    2014-01-01

    The Yokosuka Demonstration and Validation Project, which uses the Yokosuka Central Research Institute of Electric Power Industry (CRIEPI) site, a Neogene sedimentary and coastal environment, has been conducted since the 2006 fiscal year as a cooperative research project between NUMO (Nuclear Waste Management Organization of Japan) and CRIEPI. The objectives of this project were to examine and refine the basic methodology of the investigation and assessment in accordance with the conditions of geological environment at each stage of investigations from the surface (Preliminary Investigation and the first half of Detailed Investigation conducted by NUMO) for high level radioactive waste geological disposal. Within investigation technologies at these early stages, a borehole survey is an important means of directly obtaining various properties of the deep geological environment. On the other hand, surface geophysical prospecting data provide information about the geological and resistivity structures at depth for planning borehole surveys. During the 2006-2009 fiscal years, a series of on-site surveys and tests, including borehole surveys of YDP-1 (depth: 350 m) and YDP-2 (depth: 500 m), were conducted in this test site. Furthermore, seismic surveys (including seismic reflection method) and electromagnetic surveys (including magnetotelluric method) were conducted within the expanded CRIEPI site in the 2010 fiscal year to obtain information about the geological structure, and the resistivity structure reflecting the distribution of the salt water/fresh water boundary, respectively, to a depth of over several hundred meters. The validity of existing survey and testing methods for stepwise investigations (from surface to borehole surveys) for obtaining properties of the geological environment (in various conditions relating to differences in the properties of the Miura and the Hayama Groups at this site) was confirmed through establishing site descriptive models based on

  10. Unified Modeling Language description of the object-oriented multi-scale adaptive finite element method for Step-and-Flash Imprint Lithography Simulations

    International Nuclear Information System (INIS)

    Paszynski, Maciej; Gurgul, Piotr; Sieniek, Marcin; Pardo, David

    2010-01-01

    In the first part of the paper we present the multi-scale simulation of the Step-and-Flash Imprint Lithography (SFIL), a modern patterning process. The simulation utilizes the hp adaptive Finite Element Method (hp-FEM) coupled with Molecular Statics (MS) model. Thus, we consider the multi-scale problem, with molecular statics applied in the areas of the mesh where the highest accuracy is required, and the continuous linear elasticity with thermal expansion coefficient applied in the remaining part of the domain. The degrees of freedom from macro-scale element's nodes located on the macro-scale side of the interface have been identified with particles from nano-scale elements located on the nano-scale side of the interface. In the second part of the paper we present Unified Modeling Language (UML) description of the resulting multi-scale application (hp-FEM coupled with MS). We investigated classical, procedural codes from the point of view of the object-oriented (O-O) programming paradigm. The discovered hierarchical structure of classes and algorithms makes the UML project as independent on the spatial dimension of the problem as possible. The O-O UML project was defined at an abstract level, independent on the programming language used.

  11. The description of dense hydrogen with Wave Packet Molecular Dynamics (WPMD) simulations; Die Beschreibung von dichtem Wasserstoff mit der Methode der Wellenpaket-Molekulardynamik (WPMD)

    Energy Technology Data Exchange (ETDEWEB)

    Jakob, B.

    2006-10-10

    In this work the wave packet molecular dynamics (WPMD) is presented and applied to dense hydrogen. In the WPMD method the electrons are described by a slater determinant of periodic Gaussian wave packets. Each single particle wave function can parametrised through 8 coordinates which can be interpreted as the position and momentum, the width and its conjugate momentum. The equation of motion for these coordinates can be derived from a time depended variational principle. Properties of the equilibrium can be ascertained by a Monte Carlo simulation. With the now completely implemented antisymmetrisation the simulation yields a fundamental different behavior for dense hydrogen compare to earlier simplified models. The results show a phase transition to metallic hydrogen with a higher density than in the molecular phase. This behavior has e.g. a large implication to the physics of giant planets. This work describes the used model and explains in particular the calculation of the energy and forces. The periodicity of the wave function leads to a description in the Fourier space. The antisymmetrisation is done by Matrix operations. Moreover the numerical implementation is described in detail to allow the further development of the code. The results provided in this work show the equation of state in the temperature range 300K - 50000K an density 10{sup 23}-10{sup 24} cm{sup -3}, according a pressure 1 GPa-1000 GPa. In a phase diagram the phase transition to metallic hydrogen can be red off. The electrical conductivity of both phases is destined. (orig.)

  12. An all time low utilization of intrauterine contraceptive device as a birth spacing method--a qualitative descriptive study in district Rawalpindi, Pakistan.

    Science.gov (United States)

    Khan, Amna; Shaikh, Babar Tasneem

    2013-02-09

    Pakistan was among the leading countries in south Asia which started the family planning program in late 50s, forecasting the need to control the population. Despite this early intervention, fertility rate has declined but slower in Pakistan as compared to most other Asian countries. Pakistan has almost a stagnant contraceptive prevalence rate for more than a decade now, perhaps owing to the inadequate performance of the family planning programs. The provision and use of long term contraceptives such as IUCD has always been low (around 2%) and associated with numerous issues. Married women who want to wait before having another child, or end childbearing altogether, are not using any long term method of contraception. A descriptive qualitative study was conducted from May to July 2012, to explore and understand the perceptions of women regarding the use of IUCDs and to understand the challenges/issues at the service provider's end. Six FGDs with community women and 12 in-depth interviews were conducted with family planning providers. The data was analyzed using the Qualitative Content Analysis approach. The study revealed that the family planning clients are reluctant to use IUCDs because of a number of myths and misconceptions associated with the method. They have reservations about the provider's capability and quality of care at the facility. Private health providers are not motivated and are reluctant to provide the IUCDs because of inadequate counseling skills, lack of competence and improper supporting infrastructure. Government programs either do not have enough supplies or trained staff to promote the IUCD utilization. Besides a well-designed community awareness campaign, providers' communication and counseling skills have to be enhanced, as these are major contributing factors in IUCD acceptance. Ongoing training of all family planning service providers in IUCD insertion is very important, along with strengthening of their services.

  13. An all time low utilization of intrauterine contraceptive device as a birth spacing method- a qualitative descriptive study in district Rawalpindi, Pakistan

    Directory of Open Access Journals (Sweden)

    Khan Amna

    2013-02-01

    Full Text Available Abstract Background Pakistan was among the leading countries in south Asia which started the family planning program in late 50s, forecasting the need to control the population. Despite this early intervention, fertility rate has declined but slower in Pakistan as compared to most other Asian countries. Pakistan has almost a stagnant contraceptive prevalence rate for more than a decade now, perhaps owing to the inadequate performance of the family planning programs. The provision and use of long term contraceptives such as IUCD has always been low (around 2% and associated with numerous issues. Married women who want to wait before having another child, or end childbearing altogether, are not using any long term method of contraception. Methodology A descriptive qualitative study was conducted from May to July 2012, to explore and understand the perceptions of women regarding the use of IUCDs and to understand the challenges/issues at the service provider’s end. Six FGDs with community women and 12 in-depth interviews were conducted with family planning providers. The data was analyzed using the Qualitative Content Analysis approach. Results The study revealed that the family planning clients are reluctant to use IUCDs because of a number of myths and misconceptions associated with the method. They have reservations about the provider’s capability and quality of care at the facility. Private health providers are not motivated and are reluctant to provide the IUCDs because of inadequate counseling skills, lack of competence and improper supporting infrastructure. Government programs either do not have enough supplies or trained staff to promote the IUCD utilization. Conclusion Besides a well-designed community awareness campaign, providers’ communication and counseling skills have to be enhanced, as these are major contributing factors in IUCD acceptance. Ongoing training of all family planning service providers in IUCD insertion is very

  14. SU-G-BRC-08: Evaluation of Dose Mass Histogram as a More Representative Dose Description Method Than Dose Volume Histogram in Lung Cancer Patients

    Energy Technology Data Exchange (ETDEWEB)

    Liu, J; Eldib, A; Ma, C [Fox Chase Cancer Center, Philadelphia, PA (United States); Lin, M [The University of Texas Southwestern Medical Ctr, Dallas, TX (United States); Li, J [Cyber Medical Inc, Xian, Shaanxi (China); Mora, G [Universidade de Lisboa, Codex, Lisboa (Portugal)

    2016-06-15

    Purpose: Dose-volume-histogram (DVH) is widely used for plan evaluation in radiation treatment. The concept of dose-mass-histogram (DMH) is expected to provide a more representative description as it accounts for heterogeneity in tissue density. This study is intended to assess the difference between DVH and DMH for evaluating treatment planning quality. Methods: 12 lung cancer treatment plans were exported from the treatment planning system. DVHs for the planning target volume (PTV), the normal lung and other structures of interest were calculated. DMHs were calculated in a similar way as DVHs expect that the voxel density converted from the CT number was used in tallying the dose histogram bins. The equivalent uniform dose (EUD) was calculated based on voxel volume and mass, respectively. The normal tissue complication probability (NTCP) in relation to the EUD was calculated for the normal lung to provide quantitative comparison of DVHs and DMHs for evaluating the radiobiological effect. Results: Large differences were observed between DVHs and DMHs for lungs and PTVs. For PTVs with dense tumor cores, DMHs are higher than DVHs due to larger mass weighing in the high dose conformal core regions. For the normal lungs, DMHs can either be higher or lower than DVHs depending on the target location within the lung. When the target is close to the lower lung, DMHs show higher values than DVHs because the lower lung has higher density than the central portion or the upper lung. DMHs are lower than DVHs for targets in the upper lung. The calculated NTCPs showed a large range of difference between DVHs and DMHs. Conclusion: The heterogeneity of lung can be well considered using DMH for evaluating target coverage and normal lung pneumonitis. Further studies are warranted to quantify the benefits of DMH over DVH for plan quality evaluation.

  15. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... aim of this thesis is to compare and evaluate selected rapid evaluation techniques for sensory profiling. Method variations have been suggested for evaluations in product development and quality control, and method insight is provided. The thesis includes three original studies, designed...... as a consequence of the current practices and needs faced in the industry. Study I compared applicability and validity of rapid methods across several panels of trained assessors. Two rapid approaches were introduced for the evaluation of foods. The first method, ‘Free Multiple Sorting’, allows subjects to perform...

  16. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  17. Training of audio descriptors: the cinematographic aesthetics as basis for the learning of the audio description aesthetics – materials, methods and products

    Directory of Open Access Journals (Sweden)

    Soraya Ferreira Alves

    2016-12-01

    Full Text Available Audio description (AD, a resource used to make theater, cinema, TV, and visual works of art accessible to people with visual impairments, is slowly being implemented in Brazil and demanding qualified professionals. Based on this statement, this article reports the results of a research developed during post-doctoral studies. The study is dedicated to the confrontation of film aesthetics with audio description techniques to check how the knowledge of the former can contribute to audiodescritor training. Through action research, a short film adapted from a Mario de Andrade’s, a Brazilian writer, short story called O Peru de Natal (Christmas Turkey was produced. The film as well as its audio description were carried out involving students and teachers from the discipline Intersemiotic Translation at the State University of Ceará. Thus, we intended to suggest pedagogical procedures generated by the students experiences by evaluating their choices and their implications.

  18. Scattering theory for explicitely time-dependent interactions

    International Nuclear Information System (INIS)

    Perusch, M.

    1982-01-01

    Multiple ionization of hydrogen atoms has got increased attention in recent years in connection with high-power lasers. Due to the strong external electromagnetic fields, perturbation theory is no longer valid. The expression for the multiple ionization probability contains the projections of the time-dependent Hamilton operators and the Moeller operators. The main point of the present work is a proof of existence and completeness of the Moeller operators. The proof of existence and completeness is given. The final chapter contains a physical interpretation and discussion of the multiple ionization probability. (G.Q.)

  19. Implementation of 3D-virtual brachytherapy in the management of breast cancer: a description of a new method of interstitial brachytherapy

    International Nuclear Information System (INIS)

    Vicini, Frank A.; Jaffray, David A.; Horwitz, Eric M.; Edmundson, Gregory K.; DeBiose, David A.; Kini, Vijay R.; Martinez, Alvaro A.

    1998-01-01

    Purpose: We present the initial description of a new technique of interstitial breast brachytherapy in which a computer-generated image of an implant template is applied virtually to serial-computed tomography (CT) scan images of a patient's breast. Optimal placement of the virtual template around the CT images of the proposed target volume provides the physician with a preplan for improved positioning of implant needles around the actual target volume intraoperatively. Methods and Materials: Since March of 1993, 110 patients with early-stage breast cancer were entered onto a protocol of low or high dose rate brachytherapy as the sole radiation modality for part of their breast-conserving therapy. To improve the accuracy and reproducibility of target volume coverage in patients with a closed lumpectomy cavity, 11 of these implants were performed using the virtual brachytherapy technique. The virtual implant procedure was performed by first placing radiopaque skin markers on the breast surface for reference on the CT image and ultimately as intraoperative landmarks for the placement of implant needles. A CT scan of the breast was then performed and the target volume outlined on each CT scan slice by the physician. A virtual image of the brachytherapy template was then positioned around the CT image of the target volume to achieve an idealized implant with optimal coverage. The projected entrance and exit points of all needles on the skin of the breast (from the idealized virtual implant) were then identified (by perspective rendering of multiple 3D views) and hard-copy images taken to the operating room. The implant was then constructed by referencing the virtual implant images (needle entrance and exit points) to the radiopaque skin markers on the breast. After the implant was completed, a CT scan of the breast with the template catheters or needles in position was taken for comparison of the actual target volume coverage with the virtual implant generated

  20. Description and Methods of the Automated Document Management System Usage in Scientific Organizational Activities of the Joint Institute for Nuclear Research (ADS SOA JINR)

    CERN Document Server

    Borisovsky, V F; Kekelidze, M G; Nikonov, E G; Senchenko, V A

    2005-01-01

    This paper presents the structure description and user guide for Information program system for automation of a document flow for support of scientific arrangement planning (ADS SOA) which can be used for planning and carrying out seminars, workshops, conferences and other arrangements of research management. This work is intended for automation of scientific research management in the Joint Institute for Nuclear Research. The complex of programs represents the CDS Agenda system used in the European Organization for Nuclear Research (CERN), which is adapted to the conditions of JINR.

  1. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  2. Database Description - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ... QTL list, Plant DB link & Genome analysis methods Alternative name - DOI 10.18908/lsdba.nbdc01194-01-000 Cr...ers and QTLs are curated manually from the published literature. The marker information includes marker sequences, genotyping methods... Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  3. Microscopic description of nuclear reactions

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1992-01-01

    The genealogical series method has been extended to the continuous spectrum of the many-body systems. New nonlinear integral equations have been formulated to perform the microscopical description of the nuclear reactions with arbitrary number of particles. The way to solve them numerically is demonstrated

  4. Improving Published Descriptions of Germplasm.

    Science.gov (United States)

    Published descriptions of new germplasm, such as in the Journal of Plant Registrations (JPR) and, prior to mid-2007, in Crop Science, are important vehicles for allowing researchers and other interested parties to learn about such germplasm and the methods used to generate them. Launched in 2007, JP...

  5. Post-mortem radiography of the lungs: Experiments to compare various methods of examination and descriptions of their usefulness in actual practice

    International Nuclear Information System (INIS)

    Pankow, W.

    1986-01-01

    Described is the post-mortem examination of the isolated lung using radiologic-morphologic and histologic methods. Comparisons are made ragarding practical value of the conservation techniques chosen, which were the method of Markaria and Heitzmann that is based on fixing in alcohol and air drying and the nitrogen freezing method developed by Rau and colleagues. Both methods ensure adequate visualition of the pulmonary ultrastructure by X-rays, even though this observation should be qualified by the fact that pulmonary tissue fixed in alcohol tends to shrink and that intraalveolar edema are thus artificially reduced. Either of the methods under investigation permits angiographic and bronchographic examinations to be carried out without difficulty. In macroscopic evaluations better results are obtained for lungs fixed in alcohol. Freeze-dried samples offer advantages in the histological assessment of the pulmonary ultrastructure. Post-mortem radiography of the lungs is particularly valuable in the analysis of pathological changes in the pulmonary structure. (MBC) [de

  6. „Hustý popis“ jako literárněvědná metoda? // "Thick description" as a method of literary theory?

    Directory of Open Access Journals (Sweden)

    Jitka Paitlová

    2016-11-01

    Full Text Available This paper deals with a selected example of the understanding of the Anglo-Saxon New Historicism by German literary scholars. It focuses on the method of “thick description” as formulated by the American anthropologist Clifford Geertz and as criticized by German literary scholar and ethnologist Thomas Fechner-Smarsly. In connection with the so-called anthropological turn, it consists in the application of ethnology in literary criticism. According to Geertz a semantic density arises from the complexity of described, but Geertz fails to formulate a general theory. Fechner sees a great potential for literary studies in the method of “thick description”, but he criticizes the lack of system in Geertz’, when he is reluctant to formulate a generally applicable model of this method. Fechner therefore calls for contextualization, organization and instantiation methods of “thick description” in literary studies and, moreover, emphasizes the interdisciplinary overlap.

  7. mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

    Science.gov (United States)

    van Velthoven, Michelle Helena; Li, Ye; Wang, Wei; Du, Xiaozhen; Wu, Qiong; Chen, Li; Majeed, Azeem; Rudan, Igor; Zhang, Yanfeng; Car, Josip

    2013-01-01

    Background We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies. Field site The field site for this mHealth project was Zhao County, which lies 280 km south of Beijing in Hebei Province, China. Methods We described the methodology of two studies: (i) a mixed methods study exploring factors influencing sample size calculations for mHealth–based health surveys and (ii) a cross–over study determining validity of an mHealth text messaging data collection tool. The first study used mixed methods, both quantitative and qualitative, including: (i) two surveys with caregivers of young children, (ii) interviews with caregivers, village doctors and participants of the cross–over study, and (iii) researchers’ views. We combined data from caregivers, village doctors and researchers to provide an in–depth understanding of factors influencing sample size calculations for mHealth–based health surveys. The second study, a cross–over study, used a randomised cross–over study design to compare the traditional face–to–face survey method to the new text messaging survey method. We assessed data equivalence (intrarater agreement), the amount of information in responses, reasons for giving different responses, the response rate, characteristics of non–responders, and the error rate. Conclusions This paper described the objectives, field site and methods of a large mHealth project part of a collaboration between researchers in China and the UK. The mixed methods study evaluating factors that influence sample size calculations could help future studies with estimating reliable sample sizes. The cross–over study comparing face–to–face and text message survey data collection

  8. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  9. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  10. Description of recovery method used for curdlan produced by Agrobacterium sp. IFO 13140 and its relation to the morphology and physicochemical and technological properties of the polysaccharide.

    Science.gov (United States)

    Mangolim, Camila Sampaio; Silva, Thamara Thaiane da; Fenelon, Vanderson Carvalho; Koga, Luciana Numata; Ferreira, Sabrina Barbosa de Souza; Bruschi, Marcos Luciano; Matioli, Graciette

    2017-01-01

    Curdlan is a linear polysaccharide considered a dietary fiber and with gelation properties. This study evaluated the structure, morphology and the physicochemical and technological properties of curdlan produced by Agrobacterium sp. IFO 13140 recovered by pre-gelation and precipitation methods. Commercial curdlan submitted or otherwise to the pre-gelation process was also evaluated. The data obtained from structural analysis revealed a similarity between the curdlan produced by Agrobacterium sp. IFO 13140 (recovered by both methods) and the commercial curdlans. The results showed that the curdlans evaluated differed significantly in terms of dispersibility and gelation, and only the pre-gelled ones had significant potential for food application, because this method influence on the size of the particles and in the presence of NaCl. In terms of technological properties, the curdlan produced by Agrobacterium sp. IFO 13140 (pre-gelation method) had a greater water and oil holding capacity (64% and 98% greater, respectively) and a greater thickening capacity than the pre-gelled commercial curdlan. The pre-gelled commercial curdlan displayed a greater gelling capacity at 95°C than the others. When applied to food, only the pre-gelled curdlans improved the texture parameters of yogurts and reduced syneresis. The curdlan gels, which are rigid and stable in structure, demonstrated potential for improving the texture of food products, with potential industrial use.

  11. [Comparative description and retrospective analisis of modern methods of surgical wounds closure for intraoperative prophylaxis of development of pathologic cutaneous cicatrices].

    Science.gov (United States)

    Stavyts'kyĭ, S O; Avetikov, D S; Lokes, K P; Rozkolupa, O O; Boĭko, I V

    2014-05-01

    The experience of application of various methods of closure was presented for the head and neck cutaneous wound surfaces after elective operative interventions. The variant of the postoperative results estimation and optimization of the wounds healing by primary closure was proposed.

  12. Accuracy of Several Wave Function and Density Functional Theory Methods for Description of Noncovalent Interaction of Saturated and Unsaturated Hydrocarbon Dimers

    Czech Academy of Sciences Publication Activity Database

    Granatier, Jaroslav; Pitoňák, M.; Hobza, Pavel

    2012-01-01

    Roč. 8, č. 7 (2012), s. 2282-2292 ISSN 1549-9618 Grant - others:APVV(SK) APVV-0059-10 Institutional research plan: CEZ:AV0Z40550506 Keywords : intermolecular interaction energies * Plesset perturbation-theory * molecular-orbital methods * protein rubredoxin Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 5.389, year: 2012

  13. A comparison between the adiabatic time dependent Hartree-Fock and the generator coordinate methods for the description of nuclear collective motion

    International Nuclear Information System (INIS)

    Villars, F.

    1975-01-01

    The objective of the work is to draw attention to the essential equivalence of the two apparently quite distinct ways of describing nuclear collective dyanmics, the adiabatic time-dependent Hartree-Fock method (ADTHF) on the one hand, and the Generator Coordinate (GC) method on the other hand. To demonstrate this relation, an analysis of the simplest case, in which collective motion is described by a single collective para- meter q(t) is presented. In the ATDHF approach, two self-consistency conditions are obtained; the resultant expressions for the collective potential and kinetic energies represent a special case of the more general results of Baranger and Veneroni. In the G.C. approach to the same system (with the same collective parameter q), the narrow overlap approximation must be made, as the counterpart of the adiabatic approximation in the TDHF method. In its conventional form, the G.C. method leads to a different expression for the collective kinetic energy. It is shown however, that a simple generalization of the G.C.-wave function leads to corrections determined by a variational principle. In leading order, the corrected expression for the collective kinetic energy is identical with the TDHF result In both cases, the collective inertia is determined by a self-consistent cranking formula

  14. Methods and Tools to allow molecular flow simulations to be coupled to higher level continuum descriptions of flows in porous/fractured media and aerosol/dust dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Loyalka, Sudarshan [Univ. of Missouri, Columbia, MO (United States)

    2015-04-09

    The purpose of this project was to develop methods and tools that will aid in safety evaluation of nuclear fuels and licensing of nuclear reactors relating to accidents.The objectives were to develop more detailed and faster computations of fission product transport and aerosol evolution as they generally relate to nuclear fuel and/or nuclear reactor accidents. The two tasks in the project related to molecular transport in nuclear fuel and aerosol transport in reactor vessel and containment. For both the tasks, explorations of coupling of Direct Simulation Monte Carlo with Navier-Stokes solvers or the Sectional method were not successful. However, Mesh free methods for the Direct Simulation Monte Carlo method were successfully explored.These explorations permit applications to porous and fractured media, and arbitrary geometries.The computations were carried out in Mathematica and are fully parallelized. The project has resulted in new computational tools (algorithms and programs) that will improve the fidelity of computations to actual physics, chemistry and transport of fission products in the nuclear fuel and aerosol in reactor primary and secondary containments.

  15. LIFTING THE DUSTY VEIL WITH NEAR- AND MID-INFRARED PHOTOMETRY. I. DESCRIPTION AND APPLICATIONS OF THE RAYLEIGH-JEANS COLOR EXCESS METHOD

    International Nuclear Information System (INIS)

    Majewski, Steven R.; Zasowski, Gail; Nidever, David L.

    2011-01-01

    The Milky Way (MW) remains a primary laboratory for understanding the structure and evolution of spiral galaxies, but typically we are denied clear views of MW stellar populations at low Galactic latitudes because of extinction by interstellar dust. However, the combination of Two Micron All-Sky Survey (2MASS) near-infrared (NIR) and Spitzer-IRAC mid-infrared (MIR) photometry enables a powerful method for determining the line-of-sight reddening to any star: the sampled wavelengths lie in the Rayleigh-Jeans part of the spectral energy distribution of most stars, where, to first order, all stars have essentially the same intrinsic color. Thus, changes in stellar NIR-MIR colors due to interstellar reddening are readily apparent, and (under an assumed extinction law) the observed colors and magnitudes of stars can be easily and accurately restored to their intrinsic values, greatly increasing their usefulness for Galactic structure studies. In this paper, we explore this 'Rayleigh-Jeans Color Excess' (RJCE) method and demonstrate that use of even a simple variant of the RJCE method based on a single reference color, (H -[4.5μ]), can rather accurately remove dust effects from previously uninterpretable 2MASS color-magnitude diagrams of stars in fields along the heavily reddened Galactic midplane, with results far superior to those derived from application of other dereddening methods. We also show that 'total' Galactic midplane extinction looks rather different from that predicted using 100μ emission maps from the IRAS/ISSA and COBE/DIRBE instruments as presented by Schlegel et al. Instead, the Galactic midplane extinction strongly resembles the distribution of 13 CO (J = 1→0) emission. Future papers will focus on refining the RJCE method and applying the technique to understand better not only dust and its distribution but also the distribution of stars intermixed with the dust in the low-latitude Galaxy.

  16. Absolute determination of thyroid activity from profile scans. Description of a correction method for extra-thyroidal activity of the neck. , pt. 2

    International Nuclear Information System (INIS)

    Damme, K.J. van

    1977-01-01

    An absolute method to measure the uptake of radioactive iodide by the thyroid by making a profile scan across the thyroid region with a slit-collimated detector is described. It is well known that the extra-thyroidal activity (ETA) in the neck may constitute a severe hindrance to measure the uptake accurately, especially in cases of hypothyroidism and often during the first few hours after the administration of the traces dose (e.g. orally 0.5 μCiNa 131 I). The author's approach to the problem is presented. A practical application of the method is discussed in extenso. A comparative evaluation of the usability of 123 I and 131 I as least-burdening radionuclides for child patients is given at the end

  17. mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

    Directory of Open Access Journals (Sweden)

    Michelle Helena van Velthoven

    2013-12-01

    Full Text Available We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies.

  18. Dual gated PET/CT imaging of small targets of the heart: method description and testing with a dynamic heart phantom.

    Science.gov (United States)

    Kokki, Tommi; Sipilä, Hannu T; Teräs, Mika; Noponen, Tommi; Durand-Schaefer, Nicolas; Klén, Riku; Knuuti, Juhani

    2010-01-01

    In PET imaging respiratory and cardiac contraction motions interfere the imaging of heart. The aim was to develop and evaluate dual gating method for improving the detection of small targets of the heart. The method utilizes two independent triggers which are sent periodically into list mode data based on respiratory and ECG cycles. An algorithm for generating dual gated segments from list mode data was developed. The test measurements showed that rotational and axial movements of point source can be separated spatially to different segments with well-defined borders. The effect of dual gating on detection of small moving targets was tested with a moving heart phantom. Dual gated images showed 51% elimination (3.6 mm out of 7.0 mm) of contraction motion of hot spot (diameter 3 mm) and 70% elimination (14 mm out of 20 mm) of respiratory motion. Averaged activity value of hot spot increases by 89% when comparing to non-gated images. Patient study of suspected cardiac sarcoidosis shows sharper spatial myocardial uptake profile and improved detection of small myocardial structures such as papillary muscles. The dual gating method improves detection of small moving targets in a phantom and it is feasible in clinical situations.

  19. Quantitative measurement of post-irradiation neck fibrosis based on the young modulus: description of a new method and clinical results.

    Science.gov (United States)

    Leung, Sing-Fai; Zheng, Yongping; Choi, Charles Y K; Mak, Suzanne S S; Chiu, Samuel K W; Zee, Benny; Mak, Arthur F T

    2002-08-01

    Postirradiation fibrosis is one of the most common late effects of radiation therapy for patients with head and neck carcinoma. An objective and quantitative method for its measurement is much desired, but the criteria currently used to score fibrosis are mostly semiquantitative and partially subjective. The Young Modulus (YM) is a physical parameter that characterizes the deformability of material to stress. The authors measured the YM in soft tissues of the neck, at defined reference points, using an ultrasound probe and computer algorithm that quantified the indentation (deformation) on tissue due to a measured, applied force. One hundred five patients who had received previous radiation therapy to the entire neck were assessed, and the results were compared with the hand palpation scores and with a functional parameter represented by the range of neck rotation, and all results were correlated with symptoms. The YM was obtained successfully in all patients examined. It had a significant positive correlation with the palpation score and a significant negative correlation with the range of neck rotation. The YM was significantly higher on the side of the neck that received a boost dose of radiation, although the corresponding palpation scores were similar. The results of all three measurement methods were correlated with symptoms. Postirradiation neck fibrosis can be measured in absolute units based on the YM. The results showed a significant correlation with hand palpation scores, with restriction of neck rotation, and with symptoms. Compared with the palpation method, the YM is more quantitative, objective, focused on small subregions, and better discriminates regions subject to differential radiation dose levels. Its inclusion in the Analytic category of the Late Effects of Normal Tissues-SOMA system should be considered to facilitate comparative studies. Copyright 2002 American Cancer Society.

  20. Novel hybrid cryo‐radial method: an emerging alternative to CT‐guided biopsy in suspected lung cancer. A prospective case series and description of technique

    Science.gov (United States)

    Yap, Elaine

    2017-01-01

    In diagnosing peripheral pulmonary lesions (PPL), radial endobronchial ultrasound (R‐EBUS) is emerging as a safer method in comparison to CT‐guided biopsy. Despite the better safety profile, the yield of R‐EBUS remains lower (73%) than CT‐guided biopsy (90%) due to the smaller size of samples. We adopted a hybrid method by adding cryobiopsy via the R‐EBUS Guide Sheath (GS) to produce larger, non‐crushed samples to improve diagnostic capability and enhance molecular testing. We report six prospective patients who underwent this procedure in our institution. R‐EBUS samples were obtained via conventional sampling methods (needle aspiration, forceps biopsy, and cytology brush), followed by a cryobiopsy. An endobronchial blocker was placed near the planned area of biopsy in advance and inflated post‐biopsy to minimize the risk of bleeding in all patients. A chest X‐ray was performed 1 h post‐procedure. All the PPLs were visualized with R‐EBUS. The mean diameter of cryobiopsy samples was twice the size of forceps biopsy samples. In four patients, cryobiopsy samples were superior in size and the number of malignant cells per high power filed and was the preferred sample selected for mutation analysis and molecular testing. There was no pneumothorax or significant bleeding to report. Cryobiopsy samples were consistently larger and were the preferred samples for molecular testing, with an increase in the diagnostic yield and reduction in the need for repeat procedures, without hindering the marked safety profile of R‐EBUS. Using an endobronchial blocker improves the safety of this procedure. PMID:29321931

  1. Analytical Criticalities Associated to Different Immunological Methods for Serum Free Light Chain Detection in Plasma Cell Dyscrasias: A Description of Particular Clinical Cases

    Directory of Open Access Journals (Sweden)

    Rocco Sabatino

    2017-04-01

    Full Text Available Current criteria for differential diagnosis of multiple myeloma (MM, Monoclonal gammopathy of undetermined significance (MGUS, and smoldering multiple myeloma (SMM are included in the 2003 guidelines by the International Myeloma Working Group (IMWG. An updated version was then published in 2014, highlighting the importance of serum free light chain (sFLC detection, as well as the κ/λ ratio as excellent indicators of clonality. At present, two commercial assays for sFLC quantification are available: the Freelite™ assay and the N-Latex assay. The first was developed by The Binding Site based on a mixture of polyclonal antibodies directed against a variety of FLC epitopes. It may be run on a wide range of nephelometers, as well as on turbidimeters. The second method was developed by Siemens and runs exclusively on Siemens instruments. It employs a probe mixture of mouse monoclonal antibodies. The aim of our study was to evaluate sFLC measurement and calculated κ/λ ratio in 85 patients with monoclonal gammopathies (MGs in order to compare methods. We demonstrated that there is only a moderate concordance between the two FLC assays. In particular, in one case, we observed no qualitative alterations of the serum protein pattern, and in the absence of a Freelite™ assay, sFLC measurement would not have been possible to highlight the increase of λ FLC.

  2. The simplest "field" methods for extractin of nematodes from plants, wood, insects and soil, with additional description how to keep extracted nematodes alive for a long time.

    Science.gov (United States)

    Ryss, A Yu

    2017-01-01

    The simplest modification of the dynamic extraction method using cottonwool filter based on the Baermann funnel principle, is described. This modification excludes the funnel because a great share of Sticky worms attach to sloping walls of a funnel and thus do not reach the collector Eppendorf tube. But the main principle of the Baermann funnel is used, I. e. sinking down of actively moving heavy narrow bodies via wide holes of filter and thus separating the active worms from passive non-Brownian moving substrate particles, which do not pass the filter and remain above it. This principle is illustrated because it has never been described before. In the proposed modification any sloping walls in the extraction paths are excluded and thus the probability to attach sticky nemotodes to walls is also excluded; only cylindrical equipment with abrupt vertical walls is used; procedures are extremely simplified to be user-friendly for beginners: only filter (cotton pads), Eppendorf tubes, plastic glasses and narrow PVC tubing are applied. The new simplified modification allows one to collect nematodes by non-professional workers, e. g. in Polar expeditions without microscopic study of results. As an addition, an efficient method to maintain extracted nematodes alive is proposed, using the "effect of water film" in foam rubber inside the Eppendorf tube. To maintain nematodes alive during several months it is recommended to suppress bacteria via addition of 0.2-0.4% formaldehyde solution and then keep the tube with nematodes in a refrigerator.

  3. A novel method for the extraction of local gravity wave parameters from gridded three-dimensional data: description, validation, and application

    Directory of Open Access Journals (Sweden)

    L. Schoon

    2018-05-01

    Full Text Available For the local diagnosis of wave properties, we develop, validate, and apply a novel method which is based on the Hilbert transform. It is called Unified Wave Diagnostics (UWaDi. It provides the wave amplitude and three-dimensional wave number at any grid point for gridded three-dimensional data. UWaDi is validated for a synthetic test case comprising two different wave packets. In comparison with other methods, the performance of UWaDi is very good with respect to wave properties and their location. For a first practical application of UWaDi, a minor sudden stratospheric warming on 30 January 2016 is chosen. Specifying the diagnostics for hydrostatic inertia–gravity waves in analyses from the European Centre for Medium-Range Weather Forecasts, we detect the local occurrence of gravity waves throughout the middle atmosphere. The local wave characteristics are discussed in terms of vertical propagation using the diagnosed local amplitudes and wave numbers. We also note some hints on local inertia–gravity wave generation by the stratospheric jet from the detection of shallow slow waves in the vicinity of its exit region.

  4. Production of the charmonium states in the direct channel of pantip annihilation and description of a new experimental method. Exclusive reactions pantip#-> #e+e-

    International Nuclear Information System (INIS)

    Brom, J.M.

    1985-06-01

    The experiment R704 at the CERN Intersecting Storages Rings (ISR) utilised a completely new technique for charmonium spectroscopy, using a cooled antiprotons beam in collision with protons of a dense, molecular H 2 ''jet target''. ISR operations, jet target and experimental apparatus are described. Observation of the reaction pantip#-> #J/Ψ#-> #e + e - (193 evts for an integrated luminosity of 141 nb -1 ) and estimation of the J/Ψ mass using the beam parameters (3096.95±0.1±0.27 MeV) are used to test the method, the energy calibration and the reproductibility of the ISR. From these results, a very good precision of ± 300 KeV is expected in the later results on J PC ≠ 1 -- states. In addition, we give new upper limits for the magnetic form factor of the proton at high transfer [fr

  5. Implementation and extension of the impulse transfer function method for future application to the space shuttle project. Volume 2: Program description and user's guide

    Science.gov (United States)

    Patterson, G.

    1973-01-01

    The data processing procedures and the computer programs were developed to predict structural responses using the Impulse Transfer Function (ITF) method. There are three major steps in the process: (1) analog-to-digital (A-D) conversion of the test data to produce Phase I digital tapes (2) processing of the Phase I digital tapes to extract ITF's and storing them in a permanent data bank, and (3) predicting structural responses to a set of applied loads. The analog to digital conversion is performed by a standard package which will be described later in terms of the contents of the resulting Phase I digital tape. Two separate computer programs have been developed to perform the digital processing.

  6. Description of analytical method and clinical utility of measuring serum 7-alpha-hydroxy-4-cholesten-3-one (7aC4) by mass spectrometry.

    Science.gov (United States)

    Donato, Leslie J; Lueke, Alan; Kenyon, Stacy M; Meeusen, Jeffrey W; Camilleri, Michael

    2018-02-01

    Imbalance of bile acids (BA) homeostasis in the gastrointestinal tract can lead to chronic diarrhea or constipation when BA in the colon are in excess or low, respectively. Since both disturbances of bowel function can result from other etiologies, identifying BA imbalance is important to tailor treatment strategies. Serum concentrations of 7-alpha-hydroxy-4-cholesten-3-one (7aC4), a precursor in bile acid synthesis, reflect BA homeostasis. Here we describe a method to accurately measure serum 7aC4 and evaluate the clinical utility in patients with diarrhea or constipation phenotypes. Serum 7aC4 is measured after acetonitrile protein precipitation using C18 liquid chromatography, tandem mass spectrometry, and deuterium-labeled 7aC4 internal standard. Assay performance including linearity, precision, and accuracy was assessed using waste serum samples. The reference interval was established in healthy individuals without BA-altering conditions or medications. Clinical performance was assessed in patients with irritable bowel syndrome. The method precisely and accurately measured 7aC4 in human serum from 1.4-338ng/mL with no ion suppression or interference from related 7-keto-cholesterol. Central 95th percentile reference interval was 2.5-63.2ng/mL. Lower serum 7aC4 was found in patients with constipation with sensitivity/specificity of 79%/55% compared to healthy controls. Higher 7aC4 was found in patients with bile acid diarrhea (BAD) compared to those without BAD with sensitivity/specificity of 82%/53%. We have developed a sensitive and precise assay for measuring the concentration of 7aC4 in serum. The assay can be used to screen for diarrhea caused by bile acid malabsorption. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  7. Hardware description languages

    Science.gov (United States)

    Tucker, Jerry H.

    1994-01-01

    Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

  8. Interface description using computational methods and tribological characteristic of Ti N/Ti C films prepared by reactive pulse arc evaporation technique

    International Nuclear Information System (INIS)

    Devia N, D. M.; Gonzalez C, J. M.; Ruden M, A.

    2013-01-01

    The Ti N/Ti C bilayers have been deposited by Plasma Assisted Physical Vapor Deposition Technique - Reactive Pulsed Arc. The coatings were analyzed by X-ray photoelectron spectroscopy (XP S) and X-ray diffraction (XRD). From the signal treatment of the narrow XP S spectra and the XRD diffraction patterns, the formation of Ti N (titanium nitride), Ti C (titanium carbide) and Ti CN (titanium carbonitride) was confirmed, with fm-3m spatial group, corresponding to the Fcc phase of the synthesized compounds. The multilayer was simulated using Density Functional Theory (DFT) by the Unrestricted Hartree Fock method. Charge distributions and electron total density were obtained; finding bond formation at the interphase, electrical neutrality and system stability. Anomalies in the corners of the structures due to edge effect, simulation ideality and the no internal tension inclusion, intrinsic to the growing, are observed. The ball on disc tribometer was used to measure the friction and wear coefficient to verify the interface formation. (Author)

  9. Interface description using computational methods and tribological characteristic of Ti N/Ti C films prepared by reactive pulse arc evaporation technique

    Energy Technology Data Exchange (ETDEWEB)

    Devia N, D. M. [Universidad Nacional de Colombia, Sede Manizales, Campus La Nubia, Manizales, Caldas (Colombia); Gonzalez C, J. M.; Ruden M, A., E-mail: dmdevian@utp.edu.co [Universidad del Valle, Edificio 349, espacio 1003, Ciudad Universitaria Melendez, Cali (Colombia)

    2013-10-01

    The Ti N/Ti C bilayers have been deposited by Plasma Assisted Physical Vapor Deposition Technique - Reactive Pulsed Arc. The coatings were analyzed by X-ray photoelectron spectroscopy (XP S) and X-ray diffraction (XRD). From the signal treatment of the narrow XP S spectra and the XRD diffraction patterns, the formation of Ti N (titanium nitride), Ti C (titanium carbide) and Ti CN (titanium carbonitride) was confirmed, with fm-3m spatial group, corresponding to the Fcc phase of the synthesized compounds. The multilayer was simulated using Density Functional Theory (DFT) by the Unrestricted Hartree Fock method. Charge distributions and electron total density were obtained; finding bond formation at the interphase, electrical neutrality and system stability. Anomalies in the corners of the structures due to edge effect, simulation ideality and the no internal tension inclusion, intrinsic to the growing, are observed. The ball on disc tribometer was used to measure the friction and wear coefficient to verify the interface formation. (Author)

  10. An introduction to and description of the first Spanish applications of slôjd (a system of manual work following the Swedish Nads method

    Directory of Open Access Journals (Sweden)

    Francesca COMAS RUBÍ

    2013-11-01

    Full Text Available The study and application of the Nads slôjd system of manual work with wood is known to have become a compulsory part of the syllabus in Spanish state schools in 1901, thanks to a Royal Decree signed by the then Minister of Education, the Honourable Romanones. However, written history is far less familiar with questions such as how this system came to be known in Spain, when it was introduced, who encouraged its use or where and how it was first applied. In this study, with the aid of a large number of hitherto unpublished documents (some of which were found in Nààs, Sweden, we shall try to answer these questions and, as a result, produce a detailed analysis of the introduction of Nads slojd to Spain at the end of the 19th century, strangely enough (or perhaps not under the clear, but implicit influence of the Spanish movement for free-thinking methods of education.

  11. The "Performance of Rotavirus and Oral Polio Vaccines in Developing Countries" (PROVIDE) study: description of methods of an interventional study designed to explore complex biologic problems.

    Science.gov (United States)

    Kirkpatrick, Beth D; Colgate, E Ross; Mychaleckyj, Josyf C; Haque, Rashidul; Dickson, Dorothy M; Carmolli, Marya P; Nayak, Uma; Taniuchi, Mami; Naylor, Caitlin; Qadri, Firdausi; Ma, Jennie Z; Alam, Masud; Walsh, Mary Claire; Diehl, Sean A; Petri, William A

    2015-04-01

    Oral vaccines appear less effective in children in the developing world. Proposed biologic reasons include concurrent enteric infections, malnutrition, breast milk interference, and environmental enteropathy (EE). Rigorous study design and careful data management are essential to begin to understand this complex problem while assuring research subject safety. Herein, we describe the methodology and lessons learned in the PROVIDE study (Dhaka, Bangladesh). A randomized clinical trial platform evaluated the efficacy of delayed-dose oral rotavirus vaccine as well as the benefit of an injectable polio vaccine replacing one dose of oral polio vaccine. This rigorous infrastructure supported the additional examination of hypotheses of vaccine underperformance. Primary and secondary efficacy and immunogenicity measures for rotavirus and polio vaccines were measured, as well as the impact of EE and additional exploratory variables. Methods for the enrollment and 2-year follow-up of a 700 child birth cohort are described, including core laboratory, safety, regulatory, and data management practices. Intense efforts to standardize clinical, laboratory, and data management procedures in a developing world setting provide clinical trials rigor to all outcomes. Although this study infrastructure requires extensive time and effort, it allows optimized safety and confidence in the validity of data gathered in complex, developing country settings. © The American Society of Tropical Medicine and Hygiene.

  12. Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

    Science.gov (United States)

    Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

    2016-09-01

    Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

  13. Coupling an analytical description of anti-scatter grids with simulation software of radiographic systems using Monte Carlo code; Couplage d'une methode de description analytique de grilles anti diffusantes avec un logiciel de simulation de systemes radiographiques base sur un code Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Rinkel, J.; Dinten, J.M.; Tabary, J

    2004-07-01

    The use of focused anti-scatter grids on digital radiographic systems with two-dimensional detectors produces acquisitions with a decreased scatter to primary ratio and thus improved contrast and resolution. Simulation software is of great interest in optimizing grid configuration according to a specific application. Classical simulators are based on complete detailed geometric descriptions of the grid. They are accurate but very time consuming since they use Monte Carlo code to simulate scatter within the high-frequency grids. We propose a new practical method which couples an analytical simulation of the grid interaction with a radiographic system simulation program. First, a two dimensional matrix of probability depending on the grid is created offline, in which the first dimension represents the angle of impact with respect to the normal to the grid lines and the other the energy of the photon. This matrix of probability is then used by the Monte Carlo simulation software in order to provide the final scattered flux image. To evaluate the gain of CPU time, we define the increasing factor as the increase of CPU time of the simulation with as opposed to without the grid. Increasing factors were calculated with the new model and with classical methods representing the grid with its CAD model as part of the object. With the new method, increasing factors are shorter by one to two orders of magnitude compared with the second one. These results were obtained with a difference in calculated scatter of less than five percent between the new and the classical method. (authors)

  14. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  15. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  16. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  17. Descriptive data analysis.

    Science.gov (United States)

    Thompson, Cheryl Bagley

    2009-01-01

    This 13th article of the Basics of Research series is first in a short series on statistical analysis. These articles will discuss creating your statistical analysis plan, levels of measurement, descriptive statistics, probability theory, inferential statistics, and general considerations for interpretation of the results of a statistical analysis.

  18. Osiris reactor descriptive report

    International Nuclear Information System (INIS)

    1976-03-01

    OSIRIS is a swimming pool reactor of 70 MW thermal power. Its main purpose is the irradiation of reactor materials in high neutron flux. A description is given of the air conditioning, ventilation, and radioactive gas removal system. (R.L.)

  19. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  20. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  1. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  2. 48 CFR 14.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Descriptive literature. 14... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 14.202-5 Descriptive literature. (a) Policy. Contracting officers must not require bidders to furnish descriptive literature unless it is...

  3. 48 CFR 514.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Descriptive literature... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 514.202-5 Descriptive literature... FAR 52.211-6 satisfies the requirement for descriptive literature. [74 FR 47739, Sept. 17, 2009] ...

  4. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  5. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  6. Input description for BIOPATH

    International Nuclear Information System (INIS)

    Marklund, J.E.; Bergstroem, U.; Edlund, O.

    1980-01-01

    The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

  7. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  8. Olkiluoto site description 2006

    International Nuclear Information System (INIS)

    Andersson, J.; Ahokas, H.; Hudson, J.A.

    2007-03-01

    This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

  9. Management control system description

    Energy Technology Data Exchange (ETDEWEB)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  10. Principle of the determination of neutron multiplication coefficients by the Monte Carlo method. Application. Description of a code for ibm 360-75; Principe de la determination des coefficients de multiplication neutronique par methode de Monte-Carlo. Application. Description d'un code pour IBM 360-75

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, J; Parisot, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The determination of neutron multiplication coefficients by the Monte Carlo method can be carried out in different ways; the are first examined particularly complex geometries; it makes use of multi-group isotropic cross sections. The performances of this code are illustrated by some examples. (author) [French] La determination des coefficients de multiplication neutronique par methode de Monte Carlo peut se faire par differentes voies, elles sont successivement examinees et comparees. On en deduit un code rapide pour des geometries particulierement complexes, il utilise des sections efficaces multigroupes isotropes. Les performances de ce code sont demontrees par quelques exemples. (auteur)

  11. Improved Detection System Description and New Method for Accurate Calibration of Micro-Channel Plate Based Instruments and Its Use in the Fast Plasma Investigation on NASA's Magnetospheric MultiScale Mission

    Science.gov (United States)

    Gliese, U.; Avanov, L. A.; Barrie, A. C.; Kujawski, J. T.; Mariano, A. J.; Tucker, C. J.; Chornay, D. J.; Cao, N. T.; Gershman, D. J.; Dorelli, J. C.; hide

    2015-01-01

    The Fast Plasma Investigation (FPI) on NASAs Magnetospheric MultiScale (MMS) mission employs 16 Dual Electron Spectrometers (DESs) and 16 Dual Ion Spectrometers (DISs) with 4 of each type on each of 4 spacecraft to enable fast (30 ms for electrons; 150 ms for ions) and spatially differentiated measurements of the full 3D particle velocity distributions. This approach presents a new and challenging aspect to the calibration and operation of these instruments on ground and in flight. The response uniformity, the reliability of their calibration and the approach to handling any temporal evolution of these calibrated characteristics all assume enhanced importance in this application, where we attempt to understand the meaning of particle distributions within the ion and electron diffusion regions of magnetically reconnecting plasmas. Traditionally, the micro-channel plate (MCP) based detection systems for electrostatic particle spectrometers have been calibrated using the plateau curve technique. In this, a fixed detection threshold is set. The detection system count rate is then measured as a function of MCP voltage to determine the MCP voltage that ensures the count rate has reached a constant value independent of further variation in the MCP voltage. This is achieved when most of the MCP pulse height distribution (PHD) is located at higher values (larger pulses) than the detection system discrimination threshold. This method is adequate in single-channel detection systems and in multi-channel detection systems with very low crosstalk between channels. However, in dense multi-channel systems, it can be inadequate. Furthermore, it fails to fully describe the behavior of the detection system and individually characterize each of its fundamental parameters. To improve this situation, we have developed a detailed phenomenological description of the detection system, its behavior and its signal, crosstalk and noise sources. Based on this, we have devised a new detection

  12. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  13. Stability analysis of explicit entropy viscosity methods for non-linear scalar conservation equations

    KAUST Repository

    Bonito, Andrea

    2013-10-03

    We establish the L2-stability of an entropy viscosity technique applied to nonlinear scalar conservation equations. First-and second-order explicit time-stepping techniques using continuous finite elements in space are considered. The method is shown to be stable independently of the polynomial degree of the space approximation under the standard CFL condition. © 2013 American Mathematical Society.

  14. Mining skeletal phenotype descriptions from scientific literature.

    Directory of Open Access Journals (Sweden)

    Tudor Groza

    Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

  15. Deep hierarchical attention network for video description

    Science.gov (United States)

    Li, Shuohao; Tang, Min; Zhang, Jun

    2018-03-01

    Pairing video to natural language description remains a challenge in computer vision and machine translation. Inspired by image description, which uses an encoder-decoder model for reducing visual scene into a single sentence, we propose a deep hierarchical attention network for video description. The proposed model uses convolutional neural network (CNN) and bidirectional LSTM network as encoders while a hierarchical attention network is used as the decoder. Compared to encoder-decoder models used in video description, the bidirectional LSTM network can capture the temporal structure among video frames. Moreover, the hierarchical attention network has an advantage over single-layer attention network on global context modeling. To make a fair comparison with other methods, we evaluate the proposed architecture with different types of CNN structures and decoders. Experimental results on the standard datasets show that our model has a more superior performance than the state-of-the-art techniques.

  16. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  17. MCO Monitoring activity description

    International Nuclear Information System (INIS)

    SEXTON, R.A.

    1998-01-01

    Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description

  18. THULE: A detailed description

    International Nuclear Information System (INIS)

    Terry, M.J.

    1964-07-01

    This report describes the THULE scheme of lattice physics calculation which has been developed in FORTRAN for the IBM 7090. This scheme predicts the neutron flux over energy and space, for many groups and regions, together with reactivity and reaction rate edits for both a single lattice cell and a reactor core. This report describes in detail the input requirements for the THULE programme which forms the main part of the scheme. Brief descriptions of the 7090 programmes TED 6 and NOAH are included as appendices. TED 6 will produce the THULE edits from a WDSN output tape and NOAH is a version of the METHUSELAH programme which contains many of the THULE edits and will also produce input cards for THULE. (author)

  19. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    Full Text Available Taking into account the fact that, throughout history, certain artworks have been considered as “worth of watching” (according to the Greek etymon ἀξιοϑέατος / aksioteatos, preservation, or theorizing, while others were not, one is led to investigate the various types of evaluative descriptions. Those artworks that are more valuable than others, or simply valuable in themselves on the basis of rather specific features, have always represented the paradigmatic model for the evaluator, thus revealing the identitary nature of value as different from one epoch to another. Our aim has been to discern, with regard to this starting point, the way in which the process of evaluating artworks fits the general matrix of the universal theory of value, with its clearly distinguished levels of evaluation, beginning with value descriptions, continuing through the features of evaluation or abstract qualities of values extracted from these descriptions, and ending with value norms or systems of accepted generalizations in evaluation. Value standpoints in such an evaluation matrix represent dispositions or preferences in procedures, which reflect the norms or signifying concepts of the time. Corresponding procedures, or applications of the hierarchicized signification of artworks, are manifested in all known forms of artwork assessment: attribution, institutionalization, and setting of priorities in terms of exhibition, conservation, acquisition, restoration, and so on. Research in the history of European art-historical ideas has corroborated the hypothesis that, prior to the late 18th century, clear normative patterns were applied when it came to the evaluation of artworks. However, with the emergence of early Romanticism, this could no longer be done in the traditional way. Before the period in question, visual art was created (regardless of some stylistic discrepancies between individual authors and classified according to well-defined thematic

  20. Metaphorical descriptions of wrongdoers

    Directory of Open Access Journals (Sweden)

    Dryll Ewa Marta

    2017-10-01

    Full Text Available What is a metaphoric picture of an evil person made of? In a study devoted to the development of the ability to use metaphorical descriptions of humans, the semantic fields of four target metaphors - Human-Swamp, Human-Snake, Human-Knife, and Human-Nettle - were established and compared. Subjects (365 young adults were asked to decipher the metaphors’ meanings. The results were obtained mainly by qualitative analysis, with frequency analysis of clusters containing synonymous meanings. The results indicate that when creating imaginary characteristics of evil people, young adults seem to be more concerned about the possibility of suffering verbal harassment (most commonly: vulgarity, mockery, gossip, jeering than the threat of actual physical assault. The results may prove useful for developmental comparisons.

  1. Polemic and Descriptive Negations

    DEFF Research Database (Denmark)

    Horslund, Camilla Søballe

    2011-01-01

    to semantics and pragmatics, negations can be used in three different ways, which gives rise to a typology of three different types of negations: 1) the descriptive negation, 2) the polemic negation, and 3) the meta-linguistic negation (Nølke 1999, 4). This typology illuminates the fact that the negation...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...... prominence and register may either work in concert or oppose each other with respect to the cues they provide for the interpretation....

  2. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  3. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  4. Qualitative and quantitative descriptions of glenohumeral motion.

    Science.gov (United States)

    Hill, A M; Bull, A M J; Wallace, A L; Johnson, G R

    2008-02-01

    Joint modelling plays an important role in qualitative and quantitative descriptions of both normal and abnormal joints, as well as predicting outcomes of alterations to joints in orthopaedic practice and research. Contemporary efforts in modelling have focussed upon the major articulations of the lower limb. Well-constrained arthrokinematics can form the basis of manageable kinetic and dynamic mathematical predictions. In order to contain computation of shoulder complex modelling, glenohumeral joint representations in both limited and complete shoulder girdle models have undergone a generic simplification. As such, glenohumeral joint models are often based upon kinematic descriptions of inadequate degrees of freedom (DOF) for clinical purposes and applications. Qualitative descriptions of glenohumeral motion range from the parody of a hinge joint to the complex realism of a spatial joint. In developing a model, a clear idea of intention is required in order to achieve a required application. Clinical applicability of a model requires both descriptive and predictive output potentials, and as such, a high level of validation is required. Without sufficient appreciation of the clinical intention of the arthrokinematic foundation to a model, error is all too easily introduced. Mathematical description of joint motion serves to quantify all relevant clinical parameters. Commonly, both the Euler angle and helical (screw) axis methods have been applied to the glenohumeral joint, although concordance between these methods and classical anatomical appreciation of joint motion is limited, resulting in miscommunication between clinician and engineer. Compounding these inconsistencies in motion quantification is gimbal lock and sequence dependency.

  5. Descriptive data of JENDL-3.2

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi; Narita, Tsutomu [eds.; Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-02-01

    The second revision of JENDL-3 (JENDL-3.2) was released in 1994. The library contains evaluated neutron nuclear data for 340 nuclides which are needed for the design of fission and fusion reactors and for shielding calculation. This report presents a brief description of the evaluation method which is given in the File-1 part of JENDL-3.2. (author)

  6. Descriptive data of JENDL-3.3

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-01-01

    The third revision of JENDL-3 (JENDL-3.3) was released in 2002. The library contains evaluated neutron nuclear data for 337 nuclides. This report presents a brief description of the evaluation method which is given in the MF1 part of JENDL-3.3. (author)

  7. Sharp Penalty Term and Time Step Bounds for the Interior Penalty Discontinuous Galerkin Method for Linear Hyperbolic Problems

    NARCIS (Netherlands)

    Geevers, Sjoerd; van der Vegt, J.J.W.

    2017-01-01

    We present sharp and sucient bounds for the interior penalty term and time step size to ensure stability of the symmetric interior penalty discontinuous Galerkin (SIPDG) method combined with an explicit time-stepping scheme. These conditions hold for generic meshes, including unstructured

  8. Employing a Qualitative Description Approach in Health Care Research

    Science.gov (United States)

    Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

    2017-01-01

    A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage. PMID:29204457

  9. Employing a Qualitative Description Approach in Health Care Research.

    Science.gov (United States)

    Bradshaw, Carmel; Atkinson, Sandra; Doody, Owen

    2017-01-01

    A qualitative description design is particularly relevant where information is required directly from those experiencing the phenomenon under investigation and where time and resources are limited. Nurses and midwives often have clinical questions suitable to a qualitative approach but little time to develop an exhaustive comprehension of qualitative methodological approaches. Qualitative description research is sometimes considered a less sophisticated approach for epistemological reasons. Another challenge when considering qualitative description design is differentiating qualitative description from other qualitative approaches. This article provides a systematic and robust journey through the philosophical, ontological, and epistemological perspectives, which evidences the purpose of qualitative description research. Methods and rigor issues underpinning qualitative description research are also appraised to provide the researcher with a systematic approach to conduct research utilizing this approach. The key attributes and value of qualitative description research in the health care professions will be highlighted with the aim of extending its usage.

  10. Olkiluoto biosphere description 2006

    International Nuclear Information System (INIS)

    Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

    2007-02-01

    This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

  11. Description of nuclear properties

    International Nuclear Information System (INIS)

    Faessler, A.

    1991-01-01

    The lectures want to give a survey about new developments in the description of nuclei. In a first chapter we try to derive nuclear properties from the basis theory of quantum chromodynamics. This is not rigorously possible. There are still many cracks in the bridge between QCD and nuclear structure. The basic ingredient for nuclear structure calculations is the nucleon-nucleon interaction. We shall discuss the nucleon-nucleon interaction in a quark model. In a further chapter we discuss the way to come from a bare nucleon-nucleon interaction in free space to an effective nucleon-nucleon interaction in a limited model space for nuclear structure calculations. Such nuclear structure calculations can be done as shell model calculations. But they are due to the large number of configurations limited to light nuclei. We discuss possibilities (MONSTER and VAMPIR) to enlarge the model space for medium heavy and heavy nuclei. As the example of the low lying isovector 1 + states we discuss collective models (Bohr - Mottelson Model, interacting Boson Model) with proton and neutron degrees of freedom. The same states can also be described microscopically with the Quasi-Particle Random Phase Approximation (QRPA). We discuss the removal of spurious states in RPA. We also discuss the calculation of form factors and compare with inelastic electron scattering data. Finally we apply QRPA to the double-beta decay. Grand unified models predict, that the neutrino is identical with his antiparticle, that it has a finite mass and a weak right-handed interaction. If these properties are found the standard model of the strong and the electro-weak interaction can not be correct. Presently we can only derive from lower limits of the half lives of neutrinoless double-beta decays upper limits of the neutrino mass and of the right-handedness of the weak interaction and lower limits of the mass of the right handed heavy vector boson, if a specific grand unified model is given. (author)

  12. Description of textures by a structural analysis.

    Science.gov (United States)

    Tomita, F; Shirai, Y; Tsuji, S

    1982-02-01

    A structural analysis system for describing natural textures is introduced. The analyzer automatically extracts the texture elements in an input image, measures their properties, classifies them into some distinctive classes (one ``ground'' class and some ``figure'' classes), and computes the distributions of the gray level, the shape, and the placement of the texture elements in each class. These descriptions are used for classification of texture images. An analysis-by-synthesis method for evaluating texture analyzers is also presented. We propose a synthesizer which generates a texture image based on the descriptions. By comparing the reconstructed image with the original one, we can see what information is preserved and what is lost in the descriptions.

  13. Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

    Directory of Open Access Journals (Sweden)

    Ida Ayu Mega Cahyani

    2018-03-01

    Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

  14. Qualitative description – the poor cousin of health research?

    OpenAIRE

    Sondergaard Jens; Andersen Rikke; Olesen Frede; Neergaard Mette

    2009-01-01

    Abstract Background The knowledge and use of qualitative description as a qualitative research approach in health services research is limited. The aim of this article is to discuss the potential benefits of a qualitative descriptive approach, to identify its strengths and weaknesses and to provide examples of use. Discussion Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed m...

  15. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  16. Dual descriptions of supersymmetry breaking

    International Nuclear Information System (INIS)

    Intrilligator, K.; Thomas, S.

    1996-08-01

    Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

  17. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  18. On the thermodynamic description of real systems

    International Nuclear Information System (INIS)

    Bernardes, N.

    1984-01-01

    A new method of approach to the theory of the thermodynamic properties of real systems is proposed, to include interactions among the constituent particles of the system. The method consists in obtaining the entropy of a real system from the entropy of the corresponding ideal system by a translation in the internal energy and other relevant extensive variables. The usefulness of the method is displayed by application to the cases of: (i) real gases, and (ii) spin paramagnetism with interactions among spins. It is shown that this description corresponds to a generalization of the molecular field approximation. (Author) [pt

  19. GAROS input deck description

    Energy Technology Data Exchange (ETDEWEB)

    Vollan, A.; Soederberg, M. (Aeronautical Research Inst. of Sweden, Bromma (Sweden))

    1989-01-01

    This report describes the input for the programs GAROS1 and GAROS2, version 5.8 and later, February 1988. The GAROS system, developed by Arne Vollan, Omega GmbH, is used for the analysis of the mechanical and aeroelastic properties for general rotating systems. It has been specially designed to meet the requirements of aeroelastic stability and dynamic response of horizontal axis wind energy converters. Some of the special characteristics are: * The rotor may have one or more blades. * The blades may be rigidly attached to the hub, or they may be fully articulated. * The full elastic properties of the blades, the hub, the machine house and the tower are taken into account. * With the same basic model, a number of different analyses can be performed: Snap-shot analysis, Floquet method, transient response analysis, frequency response analysis etc.

  20. Sirocco - Fukushima Forecast Description

    International Nuclear Information System (INIS)

    2011-01-01

    SYMPHONIE-NH is the non-hydrostatic ocean model following the Boussinesq hydrostatic SYMPHONIE-2010 model developed by the Sirocco system team (CNRS and Toulouse University). Both are using an Arakawa type finite difference method for the C grid. The R and D team generally gives priority to a physically based approach of modelling (global conservation of the mechanical energy, consistency of pressure and density, accuracy of the bottom pressure torque,...) that tends to favour low order and robust numerical schemes. Most of the physical and numerical options (Non-Hydrostatic, free surface, generalised coordinates combined to an ALE method,...) are particularly suitable for the coastal area. At the request of the International Atomic Energy Agency (IAEA, March 14, 2011), SIROCCO is delivering every day a real time 6-day forecast bulletin of the dispersion in seawater of radionuclides emitted by the Fukushima nuclear plant. The simulations are based on the S2010.18 release of the 3D SIROCCO ocean circulation model. The system is operational since March 24 and the bulletin is available on an 'open-access' basis since March 28. The model uses a stretched horizontal grid with a variable horizontal resolution: from 600 m x 600 m at the nearest grid point from Fukushima, to 5 km x 5 km offshore. The initial fields (T, S, U, V, SSH) and the lateral open boundary conditions are provided by the Mercator PSY4V1R3 system (one field per day, horizontal resolution 1/12 deg. x 1/12 deg.). At the sea surface, the ocean model is forced by the meteorological fluxes delivered every 3 hours by ECMWF.i The tidal forcing at the lateral open boundaries is provided by the T-UGO model, implemented for this purpose by the SIROCCO team on the Japanese Pacific coast. Some details are given on the methodology: Bathymetry, Initialization and large scale forcing, Tides, Atmospheric forcing, Forecast protocol, and Scenario for radioactive tracers

  1. Sirocco - Fukushima Forecast Description

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-04-10

    SYMPHONIE-NH is the non-hydrostatic ocean model following the Boussinesq hydrostatic SYMPHONIE-2010 model developed by the Sirocco system team (CNRS and Toulouse University). Both are using an Arakawa type finite difference method for the C grid. The R and D team generally gives priority to a physically based approach of modelling (global conservation of the mechanical energy, consistency of pressure and density, accuracy of the bottom pressure torque,...) that tends to favour low order and robust numerical schemes. Most of the physical and numerical options (Non-Hydrostatic, free surface, generalised coordinates combined to an ALE method,...) are particularly suitable for the coastal area. At the request of the International Atomic Energy Agency (IAEA, March 14, 2011), SIROCCO is delivering every day a real time 6-day forecast bulletin of the dispersion in seawater of radionuclides emitted by the Fukushima nuclear plant. The simulations are based on the S2010.18 release of the 3D SIROCCO ocean circulation model. The system is operational since March 24 and the bulletin is available on an 'open-access' basis since March 28. The model uses a stretched horizontal grid with a variable horizontal resolution: from 600 m x 600 m at the nearest grid point from Fukushima, to 5 km x 5 km offshore. The initial fields (T, S, U, V, SSH) and the lateral open boundary conditions are provided by the Mercator PSY4V1R3 system (one field per day, horizontal resolution 1/12 deg. x 1/12 deg.). At the sea surface, the ocean model is forced by the meteorological fluxes delivered every 3 hours by ECMWF.i The tidal forcing at the lateral open boundaries is provided by the T-UGO model, implemented for this purpose by the SIROCCO team on the Japanese Pacific coast. Some details are given on the methodology: Bathymetry, Initialization and large scale forcing, Tides, Atmospheric forcing, Forecast protocol, and Scenario for radioactive tracers

  2. TINTE. Nuclear calculation theory description report

    Energy Technology Data Exchange (ETDEWEB)

    Gerwin, H.; Scherer, W.; Lauer, A. [Forschungszentrum Juelich GmbH (DE). Institut fuer Energieforschung (IEF), Sicherheitsforschung und Reaktortechnik (IEF-6); Clifford, I. [Pebble Bed Modular Reactor (Pty) Ltd. (South Africa)

    2010-01-15

    The Time Dependent Neutronics and Temperatures (TINTE) code system deals with the nuclear and the thermal transient behaviour of the primary circuit of the High-temperature Gas-cooled Reactor (HTGR), taking into consideration the mutual feedback effects in twodimensional axisymmetric geometry. This document contains a complete description of the theoretical basis of the TINTE nuclear calculation, including the equations solved, solution methods and the nuclear data used in the solution. (orig.)

  3. Description of giant resonances

    International Nuclear Information System (INIS)

    Lane, A.M.

    1975-01-01

    The history of collective theories in nuclear physics is briefly reviewed. It is emphasised that some theories (like RPA) allow collectivity to emerge from calculations, while others (like GCM) essentially impose a collective framework from teh start. The former class has the incidental merit that it treats spreading of collective states arising from interaction with (discrete and continuum) particle excitations. A problem with the RPA calculations is that they are almost too detailed if one's interest is in exposing systematic qualitative features. The speaker (along with co-authors) has developed a sum-rule method for exposing such trends. It is based on the fact that one can readily evaluate three sum-rules; in addition to the familiar one with plus-one power of energy-weighting, those with minus-one and plus-three powers can be evaluated for RPA states in closed form. From the three moments, the energy and spread of the collective state can be obtained. Amongst other things, the approach gives a very simple derivation of the Suzuki-Mottelson result that collective energy equals √2 times the oscillator quantum. (orig.) [de

  4. ATLAS Facility Description Report

    International Nuclear Information System (INIS)

    Kang, Kyoung Ho; Moon, Sang Ki; Park, Hyun Sik; Cho, Seok; Choi, Ki Yong

    2009-04-01

    A thermal-hydraulic integral effect test facility, ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation), has been constructed at KAERI (Korea Atomic Energy Research Institute). The ATLAS has the same two-loop features as the APR1400 and is designed according to the well-known scaling method suggested by Ishii and Kataoka to simulate the various test scenarios as realistically as possible. It is a half-height and 1/288-volume scaled test facility with respect to the APR1400. The fluid system of the ATLAS consists of a primary system, a secondary system, a safety injection system, a break simulating system, a containment simulating system, and auxiliary systems. The primary system includes a reactor vessel, two hot legs, four cold legs, a pressurizer, four reactor coolant pumps, and two steam generators. The secondary system of the ATLAS is simplified to be of a circulating loop-type. Most of the safety injection features of the APR1400 and the OPR1000 are incorporated into the safety injection system of the ATLAS. In the ATLAS test facility, about 1300 instrumentations are installed to precisely investigate the thermal-hydraulic behavior in simulation of the various test scenarios. This report describes the scaling methodology, the geometric data of the individual component, and the specification and the location of the instrumentations in detail

  5. GARFEM input deck description

    Energy Technology Data Exchange (ETDEWEB)

    Zdunek, A.; Soederberg, M. (Aeronautical Research Inst. of Sweden, Bromma (Sweden))

    1989-01-01

    The input card deck for the finite element program GARFEM version 3.2 is described in this manual. The program includes, but is not limited to, capabilities to handle the following problems: * Linear bar and beam element structures, * Geometrically non-linear problems (bar and beam), both static and transient dynamic analysis, * Transient response dynamics from a catalog of time varying external forcing function types or input function tables, * Eigenvalue solution (modes and frequencies), * Multi point constraints (MPC) for the modelling of mechanisms and e.g. rigid links. The MPC definition is used only in the geometrically linearized sense, * Beams with disjunct shear axis and neutral axis, * Beams with rigid offset. An interface exist that connects GARFEM with the program GAROS. GAROS is a program for aeroelastic analysis of rotating structures. Since this interface was developed GARFEM now serves as a preprocessor program in place of NASTRAN which was formerly used. Documentation of the methods applied in GARFEM exists but is so far limited to the capacities in existence before the GAROS interface was developed.

  6. Health Topic XML File Description

    Science.gov (United States)

    ... this page: https://medlineplus.gov/xmldescription.html Health Topic XML File Description: MedlinePlus To use the sharing ... information categories assigned. Example of a Full Health Topic Record A record for a MedlinePlus health topic ...

  7. Research team training: moving beyond job descriptions.

    Science.gov (United States)

    Nelson, LaRon E; Morrison-Beedy, Dianne

    2008-08-01

    Providing appropriate training to research team members is essential to the effective implementation and overall operation of a research project. It is important to identify job requirements beyond those listed in the job description in order to fully assess basic and supplementary training needs. Training needs should be identified prior to and during the conduct of the study. Methods for delivering the training must also be identified. This article describes the identification of training needs and methods in the design of a research team training program using examples from an HIV prevention intervention trial with adolescent girls.

  8. “Influence Method”. Detailed mathematical description

    International Nuclear Information System (INIS)

    Rios, I.J.; Mayer, R.E.

    2015-01-01

    A new method for the absolute determination of nuclear particle flux in the absence of known detector efficiency, the “Influence Method”, was recently published (I.J. Rios and R.E. Mayer, Nuclear Instruments & Methods in Physics Research A 775 (2015) 99–104). The method defines an estimator for the population and another estimator for the efficiency. In this article we present a detailed mathematical description which yields the conditions for its application, the probability distributions of the estimators and their characteristic parameters. An analysis of the different cases leads to expressions of the estimators and their uncertainties. - Highlights: • “Influence Method”, a new method for absolute particle flux determination. • Absolute counting method when detector efficiencies are not known. • Absolute detector efficiency determination

  9. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  10. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  11. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  12. The relationship between symbolic interactionism and interpretive description.

    Science.gov (United States)

    Oliver, Carolyn

    2012-03-01

    In this article I explore the relationship between symbolic interactionist theory and interpretive description methodology. The two are highly compatible, making symbolic interactionism an excellent theoretical framework for interpretive description studies. The pragmatism underlying interpretive description supports locating the methodology within this cross-disciplinary theory to make it more attractive to nonnursing researchers and expand its potential to address practice problems across the applied disciplines. The theory and method are so compatible that symbolic interactionism appears to be part of interpretive description's epistemological foundations. Interpretive description's theoretical roots have, to date, been identified only very generally in interpretivism and the philosophy of nursing. A more detailed examination of its symbolic interactionist heritage furthers the contextualization or forestructuring of the methodology to meet one of its own requirements for credibility.

  13. Explicit time integration of finite element models on a vectorized, concurrent computer with shared memory

    Science.gov (United States)

    Gilbertsen, Noreen D.; Belytschko, Ted

    1990-01-01

    The implementation of a nonlinear explicit program on a vectorized, concurrent computer with shared memory is described and studied. The conflict between vectorization and concurrency is described and some guidelines are given for optimal block sizes. Several example problems are summarized to illustrate the types of speed-ups which can be achieved by reprogramming as compared to compiler optimization.

  14. Generalized algorithm for control of numerical dispersion in explicit time-domain electromagnetic simulations

    Directory of Open Access Journals (Sweden)

    Benjamin M. Cowan

    2013-04-01

    Full Text Available We describe a modification to the finite-difference time-domain algorithm for electromagnetics on a Cartesian grid which eliminates numerical dispersion error in vacuum for waves propagating along a grid axis. We provide details of the algorithm, which generalizes previous work by allowing 3D operation with a wide choice of aspect ratio, and give conditions to eliminate dispersive errors along one or more of the coordinate axes. We discuss the algorithm in the context of laser-plasma acceleration simulation, showing significant reduction—up to a factor of 280, at a plasma density of 10^{23}  m^{-3}—of the dispersion error of a linear laser pulse in a plasma channel. We then compare the new algorithm with the standard electromagnetic update for laser-plasma accelerator stage simulations, demonstrating that by controlling numerical dispersion, the new algorithm allows more accurate simulation than is otherwise obtained. We also show that the algorithm can be used to overcome the critical but difficult challenge of consistent initialization of a relativistic particle beam and its fields in an accelerator simulation.

  15. Explicit Time Integrators for Nonlinear Dynamics Derived from the Midpoint Rule

    Directory of Open Access Journals (Sweden)

    P. Krysl

    2004-01-01

    Full Text Available We address the design of time integrators for mechanical systems that are explicit in the forcing evaluations. Our starting point is the midpoint rule, either in the classical form for the vector space setting, or in the Lie form for the rotation group. By introducing discrete, concentrated impulses we can approximate the forcing impressed upon the system over the time step, and thus arrive at first-order integrators. These can then be composed to yield a second order integrator with very desirable properties: symplecticity and momentum conservation. 

  16. Methods of statistical analysis, dimensioning and determination of production of electric power for description of the scheme applied to wind in Botucatu/ SP region, Brazil; Metodos de analise estatistica, dimensionamento e determinacao da energia eletrica produtivel para descricao do regime eolico aplicados na regiao de Botocatu-SP

    Energy Technology Data Exchange (ETDEWEB)

    Gabriel Filho, Luis Roberto Almeida [Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas], email: gabrielfilho@tupa.unesp.br; Cremasco, Camila P. [Faculdade de Tecnologia (FATEC), Presidente Prudente, SP (Brazil); Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil). Dept. de Bioestatistica; Verri, Juliano A. [Universidade Estadual Paulista Julio de Mesquita Filho (FCT/UNESP), Presidente Prudente, SP (Brazil). Dept. de Matematica, Estatistica e Computacao; Viais Neto, Daniel dos S. [Faculdade de Tecnologia (FATEC), Presidente Prudente, SP (Brazil); Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas; Seraphim, Odivaldo J. [Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural

    2011-07-01

    The wind energy is an abundant source of renewable energy, clean and available almost everywhere. For its use, studies are needed to adequately describe its intensity for statistical methods and design for wind turbines. The objective is to structure the mathematical methods used to conduct a general description of the wind, to establish a description of the wind regime using the parameters described using the Weibull function and the analytical model of power from a wind turbine, as well as applications of these methods show. This work was developed at Rural Empowerment Lab of FCA/UNESP in Botucatu-SP. For the application of methods were utilized measurements of wind speed and direction, between 2004 and 2005, obtained by anemometer RM Young Wind Monitor-Campbell. As a result, they estimated the wind behavior and distribution of wind in the region, with 78 kWh of energy production, relatively low potential to supply a small house. Moreover, this energy could possibly be applied in ambient illumination, power supply for electric fences and irrigation of vegetables. (author)

  17. Emended description of Pasteuria nishizawae.

    Science.gov (United States)

    Noel, Gregory R; Atibalentja, N; Domier, Leslie L

    2005-07-01

    The description of the Gram-positive, obligately parasitic, mycelial and endospore-forming bacterium, Pasteuria nishizawae, is emended to include additional observations on the life cycle, host specificity and endospore morphology. The nucleotide sequence of the 16S rRNA gene is also provided.

  18. Manufacturer Usage Description Specification Implementation

    OpenAIRE

    Srinivasan, Kaushik

    2017-01-01

    Manufacturer Usage Description Specification (MUDS) is aframework under RFC development that aims to automate Internet access control rules for IoT devices . These access controls prevent malicious IoT devices from attacking other devices and also protect the IoT devices from being attacked by other devices.We are implementing this framework and trying to improve its security.

  19. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

  20. NOAA Weather Radio - EAS Description

    Science.gov (United States)

    Non-Zero All Hazards Logo Emergency Alert Description Event Codes Fact Sheet FAQ Organization Search Search For Go NWS All NOAA Emergency Alert System (EAS) List of EAS Event Codes NWS EAS fact sheet What Management Agency (FEMA) and the NWS, implements the EAS at the federal level. The EAS is the nation's public

  1. Natural Language Description of Emotion

    Science.gov (United States)

    Kazemzadeh, Abe

    2013-01-01

    This dissertation studies how people describe emotions with language and how computers can simulate this descriptive behavior. Although many non-human animals can express their current emotions as social signals, only humans can communicate about emotions symbolically. This symbolic communication of emotion allows us to talk about emotions that we…

  2. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  3. Self-reported prevalence, description and management of pain in adults with haemophilia: methods, demographics and results from the Pain, Functional Impairment, and Quality of life (P-FiQ) study.

    Science.gov (United States)

    Witkop, M; Neff, A; Buckner, T W; Wang, M; Batt, K; Kessler, C M; Quon, D; Boggio, L; Recht, M; Baumann, K; Gut, R Z; Cooper, D L; Kempton, C L

    2017-07-01

    Haemophilia is characterized by frequent haemarthrosis, leading to acute/chronic joint pain. To assess self-reported prevalence, description and management of pain in adult males with mild-to-severe haemophilia and history of joint pain/bleeding. Participants completed a pain survey and five patient-reported outcome instruments assessing pain, functional impairment and health-related quality of life (HRQoL). Of 381 participants enrolled, median age was 34 years; 77% had haemophilia A, 71% had severe disease and 65% were overweight/obese. Many (56%) were not receiving routine infusions; 30% never received routine infusions. During the prior 6 months, 20% experienced acute pain, 34% chronic pain and 32% both acute/chronic pain. Subjects with both acute/chronic pain (vs. none, acute or chronic) were more likely to be depressed (30% vs. 0-15%), obese (35% vs. 20-29%) and have lower HRQoL (mean EQ-5D visual analog scale, 69 vs. 83-86) and function (median overall Hemophilia Activities List, 60 vs. 88-99). Most common analgesics used for acute/chronic pain during the prior 6 months were acetaminophen (62%/55%) and non-steroidal anti-inflammatory drugs (34%/49%); most common non-pharmacologic strategies were ice (65%/33%) and rest (51%/33%). Hydrocodone-acetaminophen was the most common opioid for both acute/chronic pain (30%); other long-acting opioids were infrequently used specifically for chronic but not acute pain (morphine, 7%; methadone, 6%; fentanyl patch, 2%). Patients with chronic pain, particularly those with both acute/chronic pain, frequently experience psychological issues, functional disability and reduced HRQoL. Treatment strategies for acute pain (e.g. routine infusions to prevent bleeding) and for chronic pain (e.g. long-acting opioids) may be underused. © 2017 The Authors. Haemophilia Published by John Wiley & Sons Ltd.

  4. Can digital stories go where palliative care research has never gone before? A descriptive qualitative study exploring the application of an emerging public health research method in an indigenous palliative care context.

    Science.gov (United States)

    Williams, Lisa; Gott, Merryn; Moeke-Maxwell, Tess; Black, Stella; Kothari, Shuchi; Pearson, Sarina; Morgan, Tessa; Wharemate, Matua Rawiri; Hansen, Whaea Whio

    2017-09-04

    The World Health Organization (WHO) has called for global approaches to palliative care development. Yet it is questionable whether one-size-fits-all solutions can accommodate international disparities in palliative care need. More flexible research methods are called for in order to understand diverse priorities at local levels. This is especially imperative for Indigenous populations and other groups underrepresented in the palliative care evidence-base. Digital storytelling (DST) offers the potential to be one such method. Digital stories are short first-person videos that tell a story of great significance to the creator. The method has already found a place within public health research and has been described as a useful, emergent method for community-based participatory research. The aim of this study was to explore Māori participants' views on DST's usefulness, from an Indigenous perspective, as a research method within the discipline of palliative care. The digital storytelling method was adapted to include Māori cultural protocols. Data capturing participant experience of the study were collected using participant observation and anonymous questionnaires. Eight participants, seven women and one man, took part. Field notes and questionnaire data were analysed using critical thematic analysis. Two main themes were identified during analyses: 1) issues that facilitated digital storytelling's usefulness as a research method for Māori reporting on end of life caregiving; and 2) issues that hindered this process. All subthemes identified: recruitment, the pōwhiri process, (Māori formal welcome of visitors) and technology, related to both main themes and are presented in this way. Digital storytelling is an emerging method useful for exploring Indigenous palliative care issues. In line with a Health Promoting Palliative Care approach that centres research in communities, it helps meet the need for diverse approaches to involve underrepresented groups.

  5. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  6. Theoretical Description of the Fission Process

    International Nuclear Information System (INIS)

    Witold Nazarewicz

    2003-01-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process

  7. Theoretical Description of the Fission Process

    Energy Technology Data Exchange (ETDEWEB)

    Witold Nazarewicz

    2003-07-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process.

  8. Non Standard Finite Difference Scheme for Mutualistic Interaction Description

    OpenAIRE

    Gabbriellini, Gianluca

    2012-01-01

    One of the more interesting themes of the mathematical ecology is the description of the mutualistic interaction between two interacting species. Based on continuous-time model developed by Holland and DeAngelis 2009 for consumer-resource mutualism description, this work deals with the application of the Mickens Non Standard Finite Difference method to transform the continuous-time scheme into a discrete-time one. It has been proved that the Mickens scheme is dynamically consistent with the o...

  9. Microscopic description of the three major bands in transitional nuclei

    International Nuclear Information System (INIS)

    Pineda S, R.L.

    1986-01-01

    The author has extended the Coherent Phonon Model to the description of the three major bands in medium heavy transitional nuclei. The model assumes an axially symmetric deformed ground intrinsic state for the description of the low lying yrast levels of the ground band, while the excited bands are generated by intrinsic excitations of the ground band. Good angular momentum states are generated by the Peierls-Yoccoz angular momentum projection method

  10. Description of the ππ → ππ, ππ → K anti K and K anti K → K anti K process in the framework of the N/D method

    International Nuclear Information System (INIS)

    Khenner, V.K.

    1978-01-01

    On the basis of the dispersion model the ππ → ππ, ππ → K anti K and K anti K → K anti K processes in the state with I=J=.0 are studied. The processes are considered using the N/D matrix method, permitting to solve precisely the related system of dispersion ratios for the partial amplitudes. It is shown that the discovery of the inelastic channel can be effectively taken into account by the introduction of the CDD (Castillejo-Dality-Dyson) term into the elastic scattering amplitude. It is established, that at a given ππ → ππ amplitude the transition from the complete multichannel problem, considered by the matrix method, to the linear problem leads to the solution, where all arbitrary constants are fixed in the case when zeros of the ππ → K anti K and ππ → ππ amplitudes coincide. In this case the ππ → K anti K amplitude coincides with that obtained by the Omnes-Muskhelishvili method. Other processes, where the interaction in the initial or final state is insignificant, can be also studied by such a method not resulting in the appearance of additional arbitrary parameters. The consideration of the problem of a resonance position in various channels has shown, that the matrix method does not obligatorily result in the appearance of the resonance with the permitted quantum numbers in all the interconnected channels

  11. Relativistic description of atomic nuclei

    International Nuclear Information System (INIS)

    Krutov, V.A.

    1985-01-01

    Papers on the relativistic description of nuclei are reviewed. The Brown and Rho ''small'' bag'' model is accepted for hardrons. Meson exchange potentials of the nucleon-nucleon interaction have been considered. Then the transition from a system of two interacting nucleons has been performed to the relativistic nucleus description as a multinucleon system on the basis of OBEP (one-boson exchange potential). The proboem of OPEP (one-pion-exchange potential) inclusion to a relativistic scheme is discussed. Simplicity of calculations and attractiveness of the Walecka model for specific computations and calculations was noted. The relativistic model of nucleons interacting through ''effective'' scalar and vector boson fields was used in the Walacka model for describing neutronaand nuclear mater matters

  12. Data Description of a System

    Directory of Open Access Journals (Sweden)

    P. Nevriva

    1996-04-01

    Full Text Available In this paper, a brief discussion on description of process by memorized data is given. The insight into the problem can offer modified views on optimal control, on data compression at communication systems with respect to information content of message, etc.The idea of process description by memorized data with different information content will be presented here on the classical case study of optimal control: the data based control algorithm (data algorithm, DA gathers data from the controlled process and derives control signal (control from data accumulated in the data base. The implementation of the DA on the ideal computer which is not limited by its speed or capacity of memory is expected for simplicity. Accuracy of the data algorithm is then given by a-priori knowledge of the task and by information exchange between the controlled process and the computer.

  13. Continuum description for jointed media

    International Nuclear Information System (INIS)

    Thomas, R.K.

    1982-04-01

    A general three-dimensional continuum description is presented for a material containing regularly spaced and approximately parallel jointing planes within a representative elementary volume. Constitutive relationships are introduced for linear behavior of the base material and nonlinear normal and shear behavior across jointing planes. Furthermore, a fracture permeability tensor is calculated so that deformation induced alterations to the in-situ values can be measured. Examples for several strain-controlled loading paths are presented

  14. Conformal description of spinning particles

    International Nuclear Information System (INIS)

    Todorov, I.T.

    1986-01-01

    This book is an introduction to the application of the conformal group to quantum field theory of particles with spin. After an introduction to the twistor representations of the conformal group of a conformally flat space-time and twistor flag manifolds with Su(2,2) orbits the classical phase space of conformal spinning particles is described. Thereafter the twistor description of classical zero mass fields is considered together with the quantization. (HSI)

  15. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    Energy Technology Data Exchange (ETDEWEB)

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  16. Durability 2007. Injection grout investigations. Background description

    International Nuclear Information System (INIS)

    Orantie, K.; Kuosa, H.

    2008-12-01

    The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

  17. Description and recognition of patterns in stochastic signals. [Electroencephalograms

    Energy Technology Data Exchange (ETDEWEB)

    Flik, T [Technische Univ. Berlin (F.R. Germany). Informatik-Forschungsgruppe Rechnerorganisation und Schaltwerke

    1975-10-01

    A method is shown for the description and recognition of patterns in stochastic signals such as electroencephalograms. For pattern extraction the signal is segmented at times of minimum amplitudes. The describing features consist of geometric values of the so defined patterns. The classification algorithm is based on the regression analysis, which is well known in the field of character recognition. For an economic classification a method is proposed which reduces the number of features. The quality of this pattern recognition method is demonstrated by the detection of spike wave complexes in electroencephalograms. The pattern description and recognition are provided for processing on a digital computer. (DE)

  18. Recommended procedures and methodology of coal description

    Science.gov (United States)

    Chao, E.C.; Minkin, J.A.; Thompson, C.L.

    1983-01-01

    This document is the result of a workshop on coal description held for the Branch of Coal Resources of the U.S. Geological Survey in March 1982. It has been prepared to aid and encourage the field-oriented coal scientist to participate directly in petrographic coal-description activities. The objectives and past and current practices of coal description vary widely. These are briefly reviewed and illustrated with examples. Sampling approaches and techniques for collecting columnar samples of fresh coal are also discussed. The recommended procedures and methodology emphasize the fact that obtaining a good megascopic description of a coal bed is much better done in the laboratory with a binocular microscope and under good lighting conditions after the samples have been cut and quickly prepared. For better observation and cross-checking using a petrographic microscope for identification purposes, an in-place polishing procedure (requiring less than 2 min) is routinely used. Methods for using both the petrographic microscope and an automated image analysis system are also included for geologists who have access to such instruments. To describe the material characteristics of a coal bed in terms of microlithotypes or lithotypes, a new nomenclature of (V), (E), (1), (M). (S). (X1). (X2) and so on is used. The microscopic description of the modal composition of a megascopically observed lithologic type is expressed in terms of (VEIM); subscripts are used to denote the volume percentage of each constituent present. To describe a coal-bed profile, semiquantitative data (without microscopic study) and quantitative data (with microscopic study) are presented in ready-to-understand form. The average total composition of any thickness interval or of the entire coal bed can be plotted on a triangular diagram having V, E, and I+ M +S as the apices. The modal composition of any mixed lithologies such as (X1), (X2), and so on can also be plotted on such a triangular ternary diagram

  19. Case Study Regarding the Design of a Direct Current Electromagnet for the MIG Welding of Metallic Materials Part I: Description of the Welding Methods and Preliminary Calculus of the Electromagnet

    Directory of Open Access Journals (Sweden)

    Tudorel Ene

    2016-10-01

    Full Text Available The paper refers to the design of a direct current electromagnet, located on the head of a swan neck welding gun of a MIG welding equipment and used for magnetising the rotation space of two additional electric arches, in order to preheat the electrode wire and of the protective gas, partially turned into plasma jet. One describes the MIG welding method in which the electromagnet is used as well as its preliminary calculus.

  20. A description of teaching methods using an on-site instructor versus a distant site instructor to train laryngoscopy to medical students in Hanoi, Vietnam, from Omaha, Nebraska, by video communication.

    Science.gov (United States)

    Zeger, Wesley G; Branecki, Chad E; Nguyen, Thang T; Hall, Todd; Boedeker, Ben; Boedeker, David; Wadman, Michael C

    2015-12-01

    This study demonstrated a method to train medical students at Hanoi Medical School in airway management from Omaha, Nebraska, using tele-mentoring techniques. Correct placement of the endotracheal tube was documented by tele-broncoscopy following intubation. This technology may increase medical training capabilities in remote or developing areas of the world. Medical care delivery could be performed using this technology by tele-mentoring a lesser trained medical provider at a distant site enabling them to accomplish complex medical tasks.

  1. Improved description of metal oxide stability

    DEFF Research Database (Denmark)

    Jauho, Thomas Stenbæk; Olsen, Thomas; Bligaard, Thomas

    2015-01-01

    The renormalized adiabatic PBE (rAPBE) method has recently been shown to comprise a significant improvement over the random phase approximation (RPA) for total energy calculations of simple solids and molecules. Here we consider the formation energies of 19 group I and II metal oxides and a few...... transition-metal oxides. The mean absolute error relative to experiments is 0.21 eV and 0.38 eV per oxygen atom for rAPBE and RPA, respectively, and thus the rAPBE method greatly improves the description of metal-oxygen bonds across a wide range of oxides. The failure of the RPA can be partly attributed...... to the lack of error cancellation between the correlation energy of the oxide on the one hand and the bulk metal and oxygen molecule on the other hand, which are all separately predicted much too negative by the RPA. We ascribe the improved performance of the rAPBE to its significantly better description...

  2. Improved description of the fragmentation of nuclear collective states

    International Nuclear Information System (INIS)

    Soloviev, V.G.

    1984-01-01

    A mathematical method is deveioped for a more accurate description of the fragmentation of one-phonon states forming giant resonances. The method consists in that the one-phonon states already fragmented are used in the two-phonon terms of wave functions. Strength functions are obtained for the exci excitation of collective charge-exchange states ano giant resonances in spherical nuclei

  3. Completely reproducible description of digital sound data with cellular automata

    International Nuclear Information System (INIS)

    Wada, Masato; Kuroiwa, Jousuke; Nara, Shigetoshi

    2002-01-01

    A novel method of compressive and completely reproducible description of digital sound data by means of rule dynamics of CA (cellular automata) is proposed. The digital data of spoken words and music recorded with the standard format of a compact disk are reproduced completely by this method with use of only two rules in a one-dimensional CA without loss of information

  4. Averaged description of 3D MHD equilibrium

    International Nuclear Information System (INIS)

    Medvedev, S.Yu.; Drozdov, V.V.; Ivanov, A.A.; Martynov, A.A.; Pashekhonov, Yu.Yu.; Mikhailov, M.I.

    2001-01-01

    A general approach by S.A.Galkin et al. in 1991 to 2D description of MHD equilibrium and stability in 3D systems was proposed. The method requires a background 3D equilibrium with nested flux surfaces to generate the metric of a Riemannian space in which the background equilibrium is described by the 2D equation of Grad-Shafranov type. The equation can be solved then varying plasma profiles and shape to get approximate 3D equilibria. In the framework of the method both planar axis conventional stellarators and configurations with spatial magnetic axis can be studied. In the present report the formulation and numerical realization of the equilibrium problem for stellarators with planar axis is reviewed. The input background equilibria with nested flux surfaces are taken from vacuum magnetic field approximately described by analytic scalar potential

  5. Compact and Hybrid Feature Description for Building Extraction

    Science.gov (United States)

    Li, Z.; Liu, Y.; Hu, Y.; Li, P.; Ding, Y.

    2017-05-01

    Building extraction in aerial orthophotos is crucial for various applications. Currently, deep learning has been shown to be successful in addressing building extraction with high accuracy and high robustness. However, quite a large number of samples is required in training a classifier when using deep learning model. In order to realize accurate and semi-interactive labelling, the performance of feature description is crucial, as it has significant effect on the accuracy of classification. In this paper, we bring forward a compact and hybrid feature description method, in order to guarantees desirable classification accuracy of the corners on the building roof contours. The proposed descriptor is a hybrid description of an image patch constructed from 4 sets of binary intensity tests. Experiments show that benefiting from binary description and making full use of color channels, this descriptor is not only computationally frugal, but also accurate than SURF for building extraction.

  6. Selecting foils for identification lineups: matching suspects or descriptions?

    Science.gov (United States)

    Tunnicliff, J L; Clark, S E

    2000-04-01

    Two experiments directly compare two methods of selecting foils for identification lineups. The suspect-matched method selects foils based on their match to the suspect, whereas the description-matched method selects foils based on their match to the witness's description of the perpetrator. Theoretical analyses and previous results predict an advantage for description-matched lineups both in terms of correctly identifying the perpetrator and minimizing false identification of innocent suspects. The advantage for description-matched lineups should be particularly pronounced if the foils selected in suspect-matched lineups are too similar to the suspect. In Experiment 1, the lineups were created by trained police officers, and in Experiment 2, the lineups were constructed by undergraduate college students. The results of both experiments showed higher suspect-to-foil similarity for suspect-matched lineups than for description-matched lineups. However, neither experiment showed a difference in correct or false identification rates. Both experiments did, however, show that there may be an advantage for suspect-matched lineups in terms of no-pick and rejection responses. From these results, the endorsement of one method over the other seems premature.

  7. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  8. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  9. Subject categories and scope descriptions

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series. It defines the subject categories and provides the scope descriptions to be used for categorization of the nuclear literature for the preparation of INIS and ETDE input by national and regional centres. Together with the other volumes of the INIS Reference Series it defines the rules, standards and practices and provides the authorities to be used in the International Nuclear Information System and ETDE. A complete list of the volumes published in the INIS Reference Series may be found on the inside front cover of this publication. This INIS/ETDE Reference Series document is intended to serve two purposes: to define the subject scope of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE) and to define the subject classification scheme of INIS and ETDE. It is thus the guide to the inputting centres in determining which items of literature should be reported, and in determining where the full bibliographic entry and abstract of each item should be included in INIS or ETDE database. Each category is identified by a category code consisting of three alphanumeric characters. A scope description is given for each subject category. The scope of INIS is the sum of the scopes of all the categories. With most categories cross references are provided to other categories where appropriate. Cross references should be of assistance in finding the appropriate category; in fact, by indicating topics that are excluded from the category in question, the cross references help to clarify and define the scope of the category to which they are appended. A Subject Index is included as an aid to subject classifiers, but it is only an aid and not a means for subject classification. It facilitates the use of this document, but is no substitute for the description of the scope of the subject categories

  10. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  11. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  12. Quantum logical description of microsystems

    International Nuclear Information System (INIS)

    Stachow, E.-W.

    1984-01-01

    An abstract object language with respect to single microsystems and its pragmatic foundation are considered in a systematic way. The quantum physical restrictions of local operations of a speaker lead to a propositional language which, under certain conditions, can be referred to an individual microsystem. The time dependence of the propositions according to the measuring process is discussed. Finally the language is extended to a space-time description of microsystems. Hereby relativity imposes certain constraints on the validi ty regions of propositions in space-time. Via realization, the language establishes the essential features of quantum physics in Hilbert space. (author)

  13. Qualitative description - the poor cousin of health research?

    DEFF Research Database (Denmark)

    Neergaard, Mette Asbjørn; Olesen, Frede; Andersen, Rikke Sand

    2009-01-01

    ', relatives' or professionals' experiences with a particular topic. Another great advantage of the method is that it is suitable if time or resources are limited. SUMMARY: As a consequence of the growth in qualitative research in the health sciences, researchers sometimes feel obliged to designate their work......BACKGROUND: The knowledge and use of qualitative description as a qualitative research approach in health services research is limited.The aim of this article is to discuss the potential benefits of a qualitative descriptive approach, to identify its strengths and weaknesses and to provide examples...... of use. DISCUSSION: Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed method research, in questionnaire development and in research projects aiming to gain firsthand knowledge of patients...

  14. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1994-09-01

    The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

  15. Thermodynamical description of excited nuclei

    International Nuclear Information System (INIS)

    Bonche, P.

    1989-01-01

    In heavy ion collisions it has been possible to obtain composite systems at rather high excitation energies corresponding to temperatures of several MeV. The theoretical studies of these systems are based on concepts borrowed from thermodynamics or statistical physics, such as the temperature. In these lectures, we present the concepts of statistical physics which are involved in the physics of heavy ion as they are produced nowadays in the laboratory and also during the final stage of a supernova collapse. We do not attempt to describe the reaction mechanisms which yield such nuclear systems nor their decay by evaporation or fragmentation. We shall only study their static properties. The content of these lectures is organized in four main sections. The first one gives the basic features of statistical physics and thermodynamics necessary to understand quantum mechanics at finite temperature. In the second one, we present a study of the liquid-gas phase transition in nuclear physics. A phenomenological approach of the stability of hot nuclei follows. The microscopic point of view is proposed in the third part. Starting from the basic concepts derived in the first part, it provides a description of excited or hot nuclei which confirms the qualitative results of the second part. Furthermore it gives a full description of most properties of these nuclei as a function of temperature. Finally in the last part, a microscopic derivation of the equation of state of nuclear matter is proposed to study the collapse of a supernova core

  16. Addressing the Language Description Deficit

    Directory of Open Access Journals (Sweden)

    M. Ali Bolgiin

    2010-01-01

    Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

  17. Archival Descriptions from the National Archives Catalog

    Data.gov (United States)

    National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

  18. Semantic foundation for preferential description logics

    CSIR Research Space (South Africa)

    Britz, K

    2011-12-01

    Full Text Available Description logics are a well-established family of knowledge representation formalisms in Artificial Intelligence. Enriching description logics with non-monotonic reasoning capabilities, especially preferential reasoning as developed by Lehmann...

  19. Computerized Italian criticality guide, description and validation

    International Nuclear Information System (INIS)

    Carotenuto, M.; Landeyro, P.A.

    1988-10-01

    Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

  20. Computerized Italian criticality guide, description and validation

    Energy Technology Data Exchange (ETDEWEB)

    Carotenuto, M; Landeyro, P A [ENEA - Dipartimento Ciclo del Combustibile, Centro Ricerche Energia, Casaccia (Italy)

    1988-10-15

    Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

  1. A fully implicit Newton-Krylov-Schwarz method for tokamak magnetohydrodynamics: Jacobian construction and preconditioner formulation

    KAUST Repository

    Reynolds, Daniel R.

    2012-01-01

    Single-fluid resistive magnetohydrodynamics (MHD) is a fluid description of fusion plasmas which is often used to investigate macroscopic instabilities in tokamaks. In MHD modeling of tokamaks, it is often desirable to compute MHD phenomena to resistive time scales or a combination of resistive-Alfvén time scales, which can render explicit time stepping schemes computationally expensive. We present recent advancements in the development of preconditioners for fully nonlinearly implicit simulations of single-fluid resistive tokamak MHD. Our work focuses on simulations using a structured mesh mapped into a toroidal geometry with a shaped poloidal cross-section, and a finite-volume spatial discretization of the partial differential equation model. We discretize the temporal dimension using a fully implicit or the backwards differentiation formula method, and solve the resulting nonlinear algebraic system using a standard inexact Newton-Krylov approach, provided by the sundials library. The focus of this paper is on the construction and performance of various preconditioning approaches for accelerating the convergence of the iterative solver algorithms. Effective preconditioners require information about the Jacobian entries; however, analytical formulae for these Jacobian entries may be prohibitive to derive/implement without error. We therefore compute these entries using automatic differentiation with OpenAD. We then investigate a variety of preconditioning formulations inspired by standard solution approaches in modern MHD codes, in order to investigate their utility in a preconditioning context. We first describe the code modifications necessary for the use of the OpenAD tool and sundials solver library. We conclude with numerical results for each of our preconditioning approaches in the context of pellet-injection fueling of tokamak plasmas. Of these, our optimal approach results in a speedup of a factor of 3 compared with non-preconditioned implicit tests, with

  2. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  3. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office (''Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs

  4. High Luminosity LHC Project Description

    CERN Document Server

    Apollinari, Giorgio; Rossi, Lucio

    2014-01-01

    The High Luminosity LHC (HL-LHC) is a novel configuration of the Large Hadron Collider, aiming at increasing the luminosity by a factor five or more above the nominal LHC design, to allow increasing the integrated luminosity, in the high luminosity experiments ATLAS and CMS, from the 300 fb-1 of the LHC original design up to 3000 fb-1 or more. This paper contains a short description of the main machine parameters and of the main equipment that need to be developed and installed. The preliminary cost evaluation and the time plan are presented, too. Finally, the international collaboration that is supporting the project, the governance and the project structure are discussed, too.

  5. TYPES OF SCIENTIFIC DESCRIPTIONS IN ROMANIAN GEOGRAPHY TEXTBOOKS

    Directory of Open Access Journals (Sweden)

    VIORICA BLÎNDA

    2012-01-01

    Full Text Available This study will provide a brief look into the numerous aspects of description as a unit of discourse and into the/as well as into those/distinctive discourse methods. The perspectives of the proposed analysis emphasize that description as a unit of discourse is no longer denigrated and that it has regained its well-defined place within the discourse (especially within the discourse of geography as a primary unit of discourse. The analysis is based on a corpus of studies represented by texts of geography available in geography textbooks. Through this study there will be outlined a number of methods and strategies of the discursive process through description.

  6. Hartree-Fock description of superdeformed states

    International Nuclear Information System (INIS)

    Dobaczewski, J.; Meyer, J.

    1991-10-01

    The discovery of superdeformation has been preceded by theoretical predictions made in Nilsson-Strutinsky calculations and a description of the phenomenon still constitutes an exciting challenge to the theory of nuclear collective motion. In particular, a determination of electromagnetic transition rates requires a knowledge of microscopic collective wave functions, which can be achieved by using the Hartree-Fock (HF) theory and the generator coordinate method (GCM). In this study we present results of our calculations concerning the properties and superdeformed states in the mercury region. Using the GCM, we diagonalize the microscopic two-body hamiltonian within the basis set of constrained HF+BCS wave functions. The GCM provides values for the energy of the ground and excited states including the shape isomer which take into account the effect of correlations in the collective degree of freedom. The GCM will also allow us to discuss the qualitative modifications of the shape isomeric stability as induced by changes in pairing correlations

  7. Biological and Phytopharmacological Descriptions of Litchi Chinensis.

    Science.gov (United States)

    Kilari, Eswar Kumar; Putta, Swathi

    2016-01-01

    Plants remain a vital source of drugs and at present, much emphasis is given to nutraceuticals. Herbal medicines have been the basis of treatment and cure for various diseases and physiological conditions in the traditional methods practiced such as ayurveda and homeopathy. Litchi chinensis belongs to the Sapindaceae family and is well-known in the Indian traditional system for its traditional uses. The parts of the plant used are leaves, flowers, fruits, seed, pulp, and pericarp. All parts of the plant are rich sources of phytochemicals--epicatechin; procyanidin A2 and procyanidin B2; leucocyanidin; cyanidin glycoside, malvidin glycoside, and saponins; butylated hydroxytoluene; isolariciresinol; kaempferol; rutin; and stigmasterol. In the present review, we explore the lychee's description, traditional medicinal uses, and phytoconstituents, and investigate the pharmacological activities in various parts of the lychee to show its importance in ethanopharmacology. This is so that this review can serve as a ready-to-use material for further research on the plant.

  8. General description of discriminating quantum operations

    International Nuclear Information System (INIS)

    Zhang Ke-Jia; Gao Fei; Qin Su-Juan; Wen Qiao-Yan; Zhu Ping; Guo Fen-Zhuo

    2011-01-01

    The discrimination of quantum operations plays a key role in quantum information and computation. Unlike discriminating quantum states, it has some special properties which can be carried out in practice. In this paper, we provide a general description of discriminating quantum operations. Concretely speaking, we describe the distinguishability between quantum operations using a measure called operator fidelity. It is shown that, employing the theory of operator fidelity, we can not only verify some previous results to discriminate unitary operations, but also exhibit a more general discrimination condition. We further apply our results to analysing the security of some quantum cryptographic protocols and discuss the realization of our method using well-developed quantum algorithms. (general)

  9. CANGEO program description and user's instruction

    International Nuclear Information System (INIS)

    Park, Joo Hwan; Jun, J. S.; Suk, H. C.; Hwang, D. H.; Yoo, Y. J.

    1997-10-01

    This is a report for the description and user's instruction of CANGEO (CANdu GEOmetry) program. CANGEO program is able to generate the geometry input for thermalhydraulic subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel data for a complicated geometry such as a CANDU fuel channel. And this code can be applicable to a bundle eccentricity from pressure tube center to bundle center, pressure tube creep, rod ballooning, and any symmetric subchannel geometry required by thermalhydraulic subchannel analysis code. The report also describes the basic calculation method of subchannel geometry, including user's manual, input and output for a CANDU fuel channel loaded with 37-element fuel bundle. (author). 35 refs., 6 figs

  10. Transport properties site descriptive model. Guidelines for evaluation and modelling

    International Nuclear Information System (INIS)

    Berglund, Sten; Selroos, Jan-Olof

    2004-04-01

    This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

  11. Multiparticle model for the description of the neutron-production in the plasma focus

    International Nuclear Information System (INIS)

    Ruhs, N.

    Following a comparison of the various numerical methods the experimental set-up is described. This is followed by a brief description of the MHD computation on which the particle computation is to be based. A description is given of the methods applied for the particle computation

  12. INTRA/Mod3.2. Manual and Code Description. Volume I - Physical Modelling

    International Nuclear Information System (INIS)

    Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

    1999-01-01

    The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the Physical modelling of INTRA and the ruling numerical methods and volume II, the User's Manual is an input description. This document, the Physical modelling of INTRA, contains code characteristics, integration methods and applications

  13. INTRA/Mod3.2. Manual and Code Description. Volume I - Physical Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Jenny; Edlund, O; Hermann, J; Johansson, Lise-Lotte

    1999-01-01

    The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the Physical modelling of INTRA and the ruling numerical methods and volume II, the User`s Manual is an input description. This document, the Physical modelling of INTRA, contains code characteristics, integration methods and applications

  14. Green-function description of dense polymeric systems

    NARCIS (Netherlands)

    Schoot, van der P.P.A.M.

    2000-01-01

    A self-consistent Green-function description of concentrated polymer solutions and dense polymeric melts is presented. The method, which applies to both uniform and nonuniform systems, is used in this work to calculate the static structure factor of a homogeneous fluid of Gaussian model chains.

  15. Description of nuclear collective motion by Wigner function moments

    International Nuclear Information System (INIS)

    Balbutsev, E.B.

    1996-01-01

    The method is presented in which the collective motion is described by the dynamic equations for the nuclear integral characteristics. The 'macroscopic' dynamics is formulated starting from the equations of the microscopic theory. This is done by taking the phase space moments of the Wigner function equation. The theory is applied to the description of collective excitations with multipolarities up to λ=5. (author)

  16. Consistent dynamical and statistical description of fission and comparison

    Energy Technology Data Exchange (ETDEWEB)

    Shunuan, Wang [Chinese Nuclear Data Center, Beijing, BJ (China)

    1996-06-01

    The research survey of consistent dynamical and statistical description of fission is briefly introduced. The channel theory of fission with diffusive dynamics based on Bohr channel theory of fission and Fokker-Planck equation and Kramers-modified Bohr-Wheeler expression according to Strutinsky method given by P.Frobrich et al. are compared and analyzed. (2 figs.).

  17. Description of elastic scattering in U-matrix method

    International Nuclear Information System (INIS)

    Edneral, V.F.; Troshin, S.M.; Tyurin, N.E.; Khrustalev, O.A.

    1975-01-01

    The elastic pp-scattering has been analyzed using a generalized reaction matrix (the U-matrix). A good agreement has been reached with the experimental total cross sections for the (pp) reaction beginning with an energy of 30 GeV and for the dsub(t)(dt)(pp) for four ISR energies [ru

  18. PACAP-27 radioimmunoassay. Description and application of a novel method

    International Nuclear Information System (INIS)

    Nemeth, J.; Jakab, B.; Horvath, B.; Jozsa, R.; Hollosy, T.; Tamas, A.; Lubics, A.; Lengvari, I.; Kiss, P.; Oberritter, Zs.

    2007-01-01

    Pituitary adenylate cyclase activating polypeptide (PACAP) is a widely distributed neuropeptide that has two molecular forms with 38 and 27 amino acid residues. The aim of the present study was to develop a new, highly specific PACAP-27 assay to investigate the quantitative distribution of PACAP-27 in the central nervous system of various vertebrate species applying the same technical and experimental conditions. Our results show that the antiserum used turned to be PACAP-27 specific. The average ID 50 value was 51.5±3.6 fmol/ml and the detection limit was 2 fmol/ml. PACAP-27 immunoreactivity was present in the examined brain areas, with highest concentration in the rat diencephalon and telencephalon. Swine and pigeon brain also contained significant amount of PACAP-27. Our results confirm the previously described data showing that PACAP-38 is the dominant form of PACAP in vertebrates, since PACAP-38 levels exceeded those of PACAP-27 in all examined brain areas. Furthermore, our study describes for the first time, the comparative quantitative distribution of PACAP-27 and -38 in the swine and pigeon brain. (author)

  19. Stochastic methods for the description of multiparticle production

    International Nuclear Information System (INIS)

    Carruthers, P.

    1984-01-01

    Dynamical questions in the evolution of excited hadronic matter are reviewed, with emphasis on KNO scaling and its possible violation. It is suggested that the KNO distributions is described by a stochastic evolution of the Fokker-Planck type related to underlying field theory by coupled rate equations approximated by Langevin equations with noise. Refined correlation analysis of data, especially the use of intensity interferometry techniques, is recommended for data analysis. 26 references

  20. IDEF5 Ontology Description Capture Method: Concepts and Formal Foundations

    Science.gov (United States)

    1992-11-01

    cutter comes to exist. The puzzle here goes back to Greek times iii the guise of the Ship of Theseus : if we bit by bit replace the planks of a ship...831 Barwise, J. and Perry, J., Situations and Attitudes, The MIT Press, Cambridge, 1983. [Burch 911 Burch, R., A Peircean Reduction Thesis : The

  1. Description of the Triton reactor

    International Nuclear Information System (INIS)

    1967-09-01

    The Triton reactor is an enriched uranium pool type reactor. It began operation in 1959, after a divergence made on the June 30 the same year. Devoted to studies of radiation protection, its core can be displaced in the longitudinal direction. The pool can be separated in two unequal compartments by a wall. The Triton core is placed in a small compartment, the Nereide core in the big compartment. A third compartment without water is called Naiade II, is separated by a concrete wall in which is made a window closed by an aluminium plate (2.50 m x 2.70 m). The Naiade II hole is useful for protection experiments using the Nereide core. After a complete refitting, the power of the triton reactor that reached progressively from 1.2 MW to 2 MW, then 3 MW has reached in August 1965 6.5 MW. The reactor has been specialized in irradiations in fix position, the core become fix, the nereide core has been hung mobile. Since it has been used for structure materials irradiation, for radioelements fabrication and fundamental research. The following descriptions are valid for the period after August 1965 [fr

  2. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  3. Probabilistic description of traffic flow

    International Nuclear Information System (INIS)

    Mahnke, R.; Kaupuzs, J.; Lubashevsky, I.

    2005-01-01

    A stochastic description of traffic flow, called probabilistic traffic flow theory, is developed. The general master equation is applied to relatively simple models to describe the formation and dissolution of traffic congestions. Our approach is mainly based on spatially homogeneous systems like periodically closed circular rings without on- and off-ramps. We consider a stochastic one-step process of growth or shrinkage of a car cluster (jam). As generalization we discuss the coexistence of several car clusters of different sizes. The basic problem is to find a physically motivated ansatz for the transition rates of the attachment and detachment of individual cars to a car cluster consistent with the empirical observations in real traffic. The emphasis is put on the analogy with first-order phase transitions and nucleation phenomena in physical systems like supersaturated vapour. The results are summarized in the flux-density relation, the so-called fundamental diagram of traffic flow, and compared with empirical data. Different regimes of traffic flow are discussed: free flow, congested mode as stop-and-go regime, and heavy viscous traffic. The traffic breakdown is studied based on the master equation as well as the Fokker-Planck approximation to calculate mean first passage times or escape rates. Generalizations are developed to allow for on-ramp effects. The calculated flux-density relation and characteristic breakdown times coincide with empirical data measured on highways. Finally, a brief summary of the stochastic cellular automata approach is given

  4. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  5. Content of system design descriptions

    International Nuclear Information System (INIS)

    1998-10-01

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective

  6. Application of descriptive statistics in analysis of experimental data

    OpenAIRE

    Mirilović Milorad; Pejin Ivana

    2008-01-01

    Statistics today represent a group of scientific methods for the quantitative and qualitative investigation of variations in mass appearances. In fact, statistics present a group of methods that are used for the accumulation, analysis, presentation and interpretation of data necessary for reaching certain conclusions. Statistical analysis is divided into descriptive statistical analysis and inferential statistics. The values which represent the results of an experiment, and which are the subj...

  7. EP1000 passive plant description

    International Nuclear Information System (INIS)

    Saiu, G.

    1999-01-01

    In 1994, a group of European Utilities, together with Westinghouse and its Industrial Partner GENESI (an Italian consortium including ANSALDO and FIAT), initiated a program designated EPP (European Passive Plant) to evaluate Westinghouse Passive Nuclear Plant Technology for application in Europe. In Phase I of the European Passive Plant Program which was completed in 1996, a 1000 MWe passive plant reference design (EP1000) was established which conforms to the European Utility Requirements (EUR) and is expected to meet the European Safety Authorities requirements. Phase 2 of the program was initiated in 1997 with the objective of developing the Nuclear Island design details and performing supporting analyses to start development of Safety Case Report (SCR) for submittal to European Licensing Authorities. The first part of Phase 2, 'Design Definition' phase (Phase 2A) will be completed at the end of 1998, the main efforts being design definition of key systems and structures, development of the Nuclear Island layout, and performing preliminary safety analyses to support design efforts. The second part, 'Phase 2B', includes both the analyses and evaluations required to demonstrate the adequacy of the design, and to support the preparation of Safety Case Report. The second part of Phase 2 of the program will start at the beginning of 1999 and will be completed in the 2001. Incorporation of the EUR has been a key design requirement for the EP1000 from the beginning of the program. Detailed design solutions to meet the EUR have been defined and the safety approach has also been developed based on the EUR guidelines. This paper integrates and updates the plant description reported in the IAEA TECDOC-968. The most significant developments of the EP1000 plant design during Phase 2A of the EPP program are described and reference is made to the key design requirements set by the EUR Rev. B document. (author)

  8. Qualitative description – the poor cousin of health research?

    Science.gov (United States)

    2009-01-01

    Background The knowledge and use of qualitative description as a qualitative research approach in health services research is limited. The aim of this article is to discuss the potential benefits of a qualitative descriptive approach, to identify its strengths and weaknesses and to provide examples of use. Discussion Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed method research, in questionnaire development and in research projects aiming to gain firsthand knowledge of patients', relatives' or professionals' experiences with a particular topic. Another great advantage of the method is that it is suitable if time or resources are limited. Summary As a consequence of the growth in qualitative research in the health sciences, researchers sometimes feel obliged to designate their work as phenomenology, grounded theory, ethnography or a narrative study when in fact it is not. Qualitative description might be a useful alternative approach to consider. PMID:19607668

  9. Descriptive psychopathology, phenomenology, and the legacy of Karl Jaspers.

    Science.gov (United States)

    Häfner, Heinz

    2015-03-01

    With his early publications (1910-1913), Karl Jaspers created a comprehensive methodological arsenal for psychiatry, thus laying the foundation for descriptive psychopathology. Following Edmund Husserl, the founder of philosophical phenomenology, Jaspers introduced phenomenology into psychopathology as "static understanding," ie, the unprejudiced intuitive reproduction (Vergegenwärtigung) and description of conscious phenomena. In a longitudinal perspective, "genetic understanding" based on empathy reveals how mental phenomena arise from mental phenomena. Severance in understanding of, or alienation from, meaningful connections is seen as indicating illness or transition of a natural development into a somatic process. Jaspers opted for philosophy early. After three terms of law, he switched to studying medicine, came to psychopathology after very little training in psychiatry; to psychology without ever studying psychology; and to a chair in philosophy without ever studying philosophy. In the fourth and subsequent editions of his General Psychopathology, imbued by his existential philosophy, Jaspers partly abandoned the descriptive method.

  10. Receptive fields selection for binary feature description.

    Science.gov (United States)

    Fan, Bin; Kong, Qingqun; Trzcinski, Tomasz; Wang, Zhiheng; Pan, Chunhong; Fua, Pascal

    2014-06-01

    Feature description for local image patch is widely used in computer vision. While the conventional way to design local descriptor is based on expert experience and knowledge, learning-based methods for designing local descriptor become more and more popular because of their good performance and data-driven property. This paper proposes a novel data-driven method for designing binary feature descriptor, which we call receptive fields descriptor (RFD). Technically, RFD is constructed by thresholding responses of a set of receptive fields, which are selected from a large number of candidates according to their distinctiveness and correlations in a greedy way. Using two different kinds of receptive fields (namely rectangular pooling area and Gaussian pooling area) for selection, we obtain two binary descriptors RFDR and RFDG .accordingly. Image matching experiments on the well-known patch data set and Oxford data set demonstrate that RFD significantly outperforms the state-of-the-art binary descriptors, and is comparable with the best float-valued descriptors at a fraction of processing time. Finally, experiments on object recognition tasks confirm that both RFDR and RFDG successfully bridge the performance gap between binary descriptors and their floating-point competitors.

  11. 40 CFR 233.11 - Program description.

    Science.gov (United States)

    2010-07-01

    ... organization and structure of the State agency (agencies) which will have responsibility for administering the... under § 233.10 shall include: (a) A description of the scope and structure of the State's program. The... will coordinate its enforcement strategy with that of the Corps and EPA; (h) A description of the...

  12. Freeform surface descriptions. Part I: Mathematical representations

    Science.gov (United States)

    Broemel, Anika; Lippmann, Uwe; Gross, Herbert

    2017-10-01

    Optical systems can benefit strongly from freeform surfaces; however, the choice of the right surface representation is not trivial and many aspects must be considered. In this work, we discuss the general approach classical globally defined representations, as well as the basic mathematics and properties of the most commonly used descriptions and present a new description developed by us for describing freeform surfaces.

  13. Promoting Shared Decision Making through Descriptive Inquiry

    Science.gov (United States)

    Seher, Rachel; Traugh, Cecelia; Cheng, Alan

    2018-01-01

    This article shows how City-As-School, a progressive public school in New York City, used descriptive inquiry to deepen shared decision making, which is a central value of the school and part of a democratic way of life. Descriptive inquiry is a democratic knowledge-making process that was developed at the Prospect School in North Bennington,…

  14. Formalizing the Problem of Music Description

    DEFF Research Database (Denmark)

    Sturm, Bob L.; Bardeli, Rolf; Langlois, Thibault

    2015-01-01

    The lack of a formalism for “the problem of music descrip- tion” results in, among other things: ambiguity in what problem a music description system must address, how it should be evaluated, what criteria define its success, and the paradox that a music description system can reproduce the “ground...

  15. Description in Literature and Other Media

    Directory of Open Access Journals (Sweden)

    Thomas Van Parys

    2009-10-01

    Full Text Available Book Review:
    Description in Literature and Other Media
    Werner Wolf & Walter Bernhart, eds., Description in Literature and Other Media. Amsterdam/New
    York: Rodopi, 2007.
    ISBN: 978-90-420-2310-9

  16. UO3 plant turnover - facility description document

    International Nuclear Information System (INIS)

    Clapp, D.A.

    1995-01-01

    This document was developed to provide a facility description for those portions of the UO 3 Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI

  17. 4 CFR 202.1 - Description.

    Science.gov (United States)

    2010-01-01

    ... further encircled by a ring bearing the gold-colored words “RECOVERY ACCOUNTABILITY AND TRANSPARENCY... 4 Accounts 1 2010-01-01 2010-01-01 false Description. 202.1 Section 202.1 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.1 Description. (a) The official seal of the Recovery...

  18. A DESCRIPTION OF BUFO PARDALIS TADPOLES (ANURA ...

    African Journals Online (AJOL)

    Tadpoles of Bufo parda/is Hewitt from Kei Road, Cape Province, are described. INTRODUCTION. Although tadpoles of B. pardalis have been included in Van Dijk's (1971) key to the genus Bufa, no adequate description of this taxon has yet been published. Further studies on variability depend upon a complete description ...

  19. Waste Management System Description Document (WMSD)

    International Nuclear Information System (INIS)

    1992-02-01

    This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

  20. Eye tracking to explore attendance in health-state descriptions.

    Directory of Open Access Journals (Sweden)

    Anna Selivanova

    Full Text Available A crucial assumption in health valuation methods is that respondents pay equal attention to all information components presented in the response task. So far, there is no solid evidence that respondents are fulfilling this condition. The aim of our study is to explore the attendance to various information cues presented in the discrete choice (DC response tasks.Eye tracking was used to study the eye movements and fixations on specific information areas. This was done for seven DC response tasks comprising health-state descriptions. A sample of 10 respondents participated in the study. Videos of their eye movements were recorded and are presented graphically. Frequencies were computed for length of fixation and number of fixations, so differences in attendance were demonstrated for particular attributes in the tasks.All respondents completed the survey. Respondents were fixating on the left-sided health-state descriptions slightly longer than on the right-sided. Fatigue was not observed, as the time spent did not decrease in the final response tasks. The time spent on the tasks depended on the difficulty of the task and the amount of information presented.Eye tracking proved to be a feasible method to study the process of paying attention and fixating on health-state descriptions in the DC response tasks. Eye tracking facilitates the investigation of whether respondents fully read the information in health descriptions or whether they ignore particular elements.

  1. A proposed descriptive methodology for environmental geologic (envirogeologic) site characterization

    International Nuclear Information System (INIS)

    Schwarz, D.L.; Snyder, W.S.

    1994-01-01

    We propose a descriptive methodology for use in environmental geologic (envirogeologic) site characterization. The method uses traditional sedimentologic descriptions augmented by environmental data needs, and facies analysis. Most other environmental methodologies for soil and sediment characterization use soil engineering and engineering geology techniques that classify by texture and engineering properties. This technique is inadequate for envirogeologic characterization of sediments. In part, this inadequacy is due to differences in the grain-size between the Unified soil Classification and the Udden-Wentworth scales. Use of the soil grain-size classification could easily cause confusion when attempting to relate descriptions based on this classification to our basic understanding of sedimentary depositional systems. The proposed envirogeologic method uses descriptive parameters to characterize a sediment sample, suggests specific tests on samples for adequate characterization, and provides a guidelines for subsurface facies analysis, based on data retrieved from shallow boreholes, that will allow better predictive models to be developed. This methodology should allow for both a more complete site assessment, and provide sufficient data for selection of the appropriate remediation technology, including bioremediation. 50 refs

  2. Audio Description as a Pedagogical Tool

    Directory of Open Access Journals (Sweden)

    Georgina Kleege

    2015-05-01

    Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

  3. Physical description of decay processes

    International Nuclear Information System (INIS)

    Henin, F.; Mayne, F.

    1981-01-01

    A dynamical formulation of quasi-particles corresponding to complex poles of Green's functions has been provided in the frame of 'Liapounov' transformations in a superoperator formalism. In this formalism, two different superorperators are associated with the hamiltonian, on the one hand an energy superoperator H, and on the other hand, an evolution superoperator L. In the case of systems with continuous spectrum it is possible to diagonalize the transform of H, the diagonal elements being the energies found by the Green's functions methods. This can be achieved without diagonalizing at the same time, the transform of L: the inverse lifetimes and the collision processes are obtained in this way. We show here on the Friedrichs model, that we can specify uniquely such a transformation in agreement with our previous 'new quantum rules for dissipative systems'. This method can be generalized to more complex systems. (orig.)

  4. Firebird-III program description

    International Nuclear Information System (INIS)

    Lin, M.R.; Prawirosochardjo, S.; Rennick, D.F.; Wessman, E.; Blain, R.J.D.; Wilson, J.M.

    1979-09-01

    The FIREBIRD-III digital computer program is a general network code developed primarily for predicting the thermalhydraulic behaviour of CANDU power reactors during a postulated loss-of-coolant accident and the subsequent emergency coolant injection. Because of its flexibility, the code can also be used to solve a large variety of general two-phase flow problems. This report describes the thermalhydraulic models and the computation methods used in the program

  5. Using Open Geographic Data to Generate Natural Language Descriptions for Hydrological Sensor Networks.

    Science.gov (United States)

    Molina, Martin; Sanchez-Soriano, Javier; Corcho, Oscar

    2015-07-03

    Providing descriptions of isolated sensors and sensor networks in natural language, understandable by the general public, is useful to help users find relevant sensors and analyze sensor data. In this paper, we discuss the feasibility of using geographic knowledge from public databases available on the Web (such as OpenStreetMap, Geonames, or DBpedia) to automatically construct such descriptions. We present a general method that uses such information to generate sensor descriptions in natural language. The results of the evaluation of our method in a hydrologic national sensor network showed that this approach is feasible and capable of generating adequate sensor descriptions with a lower development effort compared to other approaches. In the paper we also analyze certain problems that we found in public databases (e.g., heterogeneity, non-standard use of labels, or rigid search methods) and their impact in the generation of sensor descriptions.

  6. Using Open Geographic Data to Generate Natural Language Descriptions for Hydrological Sensor Networks

    Directory of Open Access Journals (Sweden)

    Martin Molina

    2015-07-01

    Full Text Available Providing descriptions of isolated sensors and sensor networks in natural language, understandable by the general public, is useful to help users find relevant sensors and analyze sensor data. In this paper, we discuss the feasibility of using geographic knowledge from public databases available on the Web (such as OpenStreetMap, Geonames, or DBpedia to automatically construct such descriptions. We present a general method that uses such information to generate sensor descriptions in natural language. The results of the evaluation of our method in a hydrologic national sensor network showed that this approach is feasible and capable of generating adequate sensor descriptions with a lower development effort compared to other approaches. In the paper we also analyze certain problems that we found in public databases (e.g., heterogeneity, non-standard use of labels, or rigid search methods and their impact in the generation of sensor descriptions.

  7. Description and Recognition of the Concept of Social Capital in Higher Education System

    Science.gov (United States)

    Tonkaboni, Forouzan; Yousefy, Alireza; Keshtiaray, Narges

    2013-01-01

    The current research is intended to describe and recognize the concept of social capital in higher education based on theoretical method in a descriptive-analytical approach. Description and Recognition of the data, gathered from theoretical and experimental studies, indicated that social capital is one of the most important indices for…

  8. Colony collapse disorder: a descriptive study.

    Directory of Open Access Journals (Sweden)

    Dennis Vanengelsdorp

    Full Text Available BACKGROUND: Over the last two winters, there have been large-scale, unexplained losses of managed honey bee (Apis mellifera L. colonies in the United States. In the absence of a known cause, this syndrome was named Colony Collapse Disorder (CCD because the main trait was a rapid loss of adult worker bees. We initiated a descriptive epizootiological study in order to better characterize CCD and compare risk factor exposure between populations afflicted by and not afflicted by CCD. METHODS AND PRINCIPAL FINDINGS: Of 61 quantified variables (including adult bee physiology, pathogen loads, and pesticide levels, no single measure emerged as a most-likely cause of CCD. Bees in CCD colonies had higher pathogen loads and were co-infected with a greater number of pathogens than control populations, suggesting either an increased exposure to pathogens or a reduced resistance of bees toward pathogens. Levels of the synthetic acaricide coumaphos (used by beekeepers to control the parasitic mite Varroa destructor were higher in control colonies than CCD-affected colonies. CONCLUSIONS/SIGNIFICANCE: This is the first comprehensive survey of CCD-affected bee populations that suggests CCD involves an interaction between pathogens and other stress factors. We present evidence that this condition is contagious or the result of exposure to a common risk factor. Potentially important areas for future hypothesis-driven research, including the possible legacy effect of mite parasitism and the role of honey bee resistance to pesticides, are highlighted.

  9. Description of an open quantum mechanical system

    International Nuclear Information System (INIS)

    Rotter, I.; Forschungszentrum Rossendorf e.V.

    1994-05-01

    A model for the description of an open quantum mechanical many-particle system is formulated. It starts from the shell model and treats the continuous states by a coupled channels method. The mixing of the discrete shell model states via the continuum of decay channels results in the genuine decaying states of the system. These states are eigenstates of a non-Hermitean Hamilton operator the eigenvalues of which give both the energies and the widths of the states. All correlations between two particles which are caused by the two-particle residual interaction, are taken into account including those via the continuum. In the formalism describing the open quantum mechanical system, the coupling between the system and its environment appears nonlinearly. If the resonance states start to overlap, a redistribution of the spectroscopic values ('trapping effect') takes place. As a result, the complexity of the system is reduced at high level density, structures in space and time are formed. This redistribution describes, on the one hand, the transition from the well-known nuclear properties at low level density to those at high level density and fits, on the other hand, into the concept of selforganization. (orig.)

  10. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  11. The Box Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactor...... description of this momentum flow. The Box Method is a practical method for the description of an Air Terminal Device which will save grid points and ensure the right level of the momentum flow....

  12. The transportation operations system: A description

    International Nuclear Information System (INIS)

    Best, R.E.; Danese, F.L.; Dixon, L.D.; Peterson, R.W.; Pope, R.B.

    1990-01-01

    This paper presents a description of the system for transporting radioactive waste that may be deployed to accomplish the assigned system mission, which includes accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste generator sites and transporting them to the FWMS destination facilities. The system description presented here contains, in part, irradiated fuel and waste casks, ancillary equipments, truck, rail, and barge transporters, cask and vehicle traffic management organizations, maintenance facilities, and other operations elements. The description is for a fully implemented system, which is not expected to be achieved, however, until several years after initial operations. 6 figs

  13. Crosswalking EAD: Collaboration in Archival Description

    Directory of Open Access Journals (Sweden)

    Amy McCrory

    2005-09-01

    Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

  14. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  15. 1995 Baseline solid waste management system description

    International Nuclear Information System (INIS)

    Anderson, G.S.; Konynenbelt, H.S.

    1995-09-01

    This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

  16. Algebraic descriptions of nuclear and molecular rotation-vibration spectra

    International Nuclear Information System (INIS)

    Roosmalen, O.S. van.

    1982-01-01

    The application of algebraic models to the description of rotational and vibrational degrees of freedom of nuclei and molecules are discussed. Simple model Hamiltonians are shown to give good agreement with the energy spectra of diatomic molecules and nuclei. Some formal aspects of path integral methods for many-boson systems are treated. The two representations for the quantum mechanical propagator are compared and appear to be identical in leading order in 1/N (N is the number of bosons). Approximations for both are static and dynamic problems are discussed. Applications of mean field techniques are also treated. A description of tri- and tetra-atomic molecules in terms of a U(4)xU(4) and U(4)xU(4)xU(4) group structure is given. Linear molecules appear to correspond with symmetries of O(4) type. S-matrix elements are calculated to test mean field methods, and the results compared with exact calculations. (Auth.)

  17. Improving Students' Reading Comprehension in Descriptive Text Through Anticipation Guide

    OpenAIRE

    Nasution, Maya Puspita

    2014-01-01

    This study concerrns with improving students' reading comprehension in descriptive text through anticipation guide.The objective was to investigate improvement of students' reading comprehension by applying anticipation guide. This research was conducted by using action research method. The subject of the study was grade VII students of SMP SWASTA TAMAN HARAPAN MEDAN totalling to 30 students. They were taught reading comprehension by anticipation guide. The instruments for collecting data wer...

  18. Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reyes, Jose A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-02-03

    This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

  19. Scripps Sediment Description File- OCSEAP Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

  20. Reachability modules for the description logic SRIQ

    CSIR Research Space (South Africa)

    Nortje, R

    2013-12-01

    Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

  1. SIO Ferromanganese Nodule Description file - IDOE Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples related to ferromanganese deposits, funded through the International Decade of...

  2. Quantum State Description Complexity (Invited Talk)

    OpenAIRE

    Vazirani, Umesh V.

    2011-01-01

    Quantum states generally require exponential sized classical descriptions, but the long conjectured area law provides hope that a large class of natural quantum states can be described succinctly. Recent progress in formally proving the area law is described.

  3. Integrated Visualisation and Description of Complex Systems

    National Research Council Canada - National Science Library

    Goodburn, D

    1999-01-01

    .... Guided by a conceptual model of a description process that is driven by user information needs within a domain context, the approach incorporates the use of novel visualization techniques based...

  4. Description of Sizewell B nuclear power plant

    International Nuclear Information System (INIS)

    Meyer, G.; Stokke, E.

    1997-09-01

    The intention of this report is to present a condensed technical description of Sizewell B in a language understandable to non-technical personnel. It is unavoidable that some parts will be less precise than the technically initiated would like to see, but hopefully the content still give a realistic picture of Sizewell B. The technical description is based on publicly available material, of which the Sizewell B safety report has been particularly useful. Nearly all figures and drawings found in this description are reproductions of corresponding material in the safety report. To keep the description from becoming too voluminous it has been necessary to condense some background material down to a small volume. Hopefully this has not introduced any errors or inaccuracies, possible oversimplification at certain points must be weighed against the wish to cover most of the topics in the agreed table of contents for these NKS reports. (au)

  5. An Application for Descriptive Nearness: Iris Recognition

    Directory of Open Access Journals (Sweden)

    Polat Kadirhan

    2017-12-01

    Full Text Available Near Set Theory has various applications in the literature. In this paper, using the concept descriptive nearness, we show how to perform iris recognition. This process has a few algorithms given via Mathematica Script Language.

  6. Defeasible inheritance-based description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-01-01

    Full Text Available of Artificial Intelligence Research 2013 Defeasible Inheritance-based Description Logics Giovanni Casini GCASINI@CSIR.CO.ZA Centre for Artificial Intelligence Research (CAIR), CSIR Meraka Institute and UKZN, South Africa Umberto Straccia UMBERTO...

  7. 49 CFR 587.6 - General description.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Side Impact Moving Deformable Barrier § 587.6 General description. (a) The moving deformable barrier consists of component parts and...

  8. Nonminimal description of spin 3/2

    International Nuclear Information System (INIS)

    Tybor, W.

    1988-01-01

    The nonminimal description (with the help of the antisymmetric tensor-bispinor) of the spin 3/2, equivalent to the Rarita-Schwinger theory, is given. The variational principle is formulated. 5 refs. (author)

  9. Towards practical defeasible reasoning for description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-07-01

    Full Text Available The formalisation of defeasible reasoning in automated systems is becoming increasingly important. Description Logics (DLs) are nowadays the main logical formalism in the field of formal ontologies. Our focus in this paper is to devise a practical...

  10. Site descriptive modelling - strategy for integrated evaluation

    International Nuclear Information System (INIS)

    Andersson, Johan

    2003-02-01

    The current document establishes the strategy to be used for achieving sufficient integration between disciplines in producing Site Descriptive Models during the Site Investigation stage. The Site Descriptive Model should be a multidisciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using site investigation data from deep bore holes and from the surface as input. The modelling comprise the following iterative steps, evaluation of primary data, descriptive and quantitative modelling (in 3D), overall confidence evaluation. Data are first evaluated within each discipline and then the evaluations are checked between the disciplines. Three-dimensional modelling (i.e. estimating the distribution of parameter values in space and its uncertainty) is made in a sequence, where the geometrical framework is taken from the geological model and in turn used by the rock mechanics, thermal and hydrogeological modelling etc. The three-dimensional description should present the parameters with their spatial variability over a relevant and specified scale, with the uncertainty included in this description. Different alternative descriptions may be required. After the individual discipline modelling and uncertainty assessment a phase of overall confidence evaluation follows. Relevant parts of the different modelling teams assess the suggested uncertainties and evaluate the feedback. These discussions should assess overall confidence by, checking that all relevant data are used, checking that information in past model versions is considered, checking that the different kinds of uncertainty are addressed, checking if suggested alternatives make sense and if there is potential for additional alternatives, and by discussing, if appropriate, how additional measurements (i.e. more data) would affect confidence. The findings as well as the modelling results are to be documented in a Site Description

  11. Effective Conformal Descriptions of Black Hole Entropy

    Directory of Open Access Journals (Sweden)

    Steven Carlip

    2011-07-01

    Full Text Available It is no longer considered surprising that black holes have temperatures and entropies. What remains surprising, though, is the universality of these thermodynamic properties: their exceptionally simple and general form, and the fact that they can be derived from many very different descriptions of the underlying microscopic degrees of freedom. I review the proposal that this universality arises from an approximate conformal symmetry, which permits an effective “conformal dual” description that is largely independent of the microscopic details.

  12. Description of hadrons using string theory

    International Nuclear Information System (INIS)

    Sugimoto, Shigeki

    2013-01-01

    We give a brief overview of 'holographic QCD' for JPS members. Applying the idea of gauge/string duality to QCD, We obtain a description of hadrons based on string theory. Using this description, a lot of properties of hadrons can be analyzed and the results are in reasonable agreement with the observations. We try to explain the basic idea and some of the interesting results in a way accessible to non-experts. (author)

  13. Description of Measurements on Biogas Stations

    Directory of Open Access Journals (Sweden)

    Ladislav Novosád

    2016-08-01

    Full Text Available This paper focuses mainly on performance analysis for three biogas stations situated within the territory of the Czech Republic. This paper contains basic details of the individual biogas stations as well as description of their types. It also refers to the general description of the measurement gauge involved, with specifications of its potential use. The final part of this paper deals with the analysis of course data obtained, with special regard to voltage, current, active power and reactive power data.

  14. System Design Description for the TMAD Code

    International Nuclear Information System (INIS)

    Finfrock, S.H.

    1995-01-01

    This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System

  15. Description and search labor for information retrieval

    OpenAIRE

    Warner, Julian

    2007-01-01

    Selection power is taken as the fundamental value for information retrieval systems. Selection power is regarded as produced by selection labor, which itself separates historically into description and search labor. As forms of mental labor, description and search labor participate in the conditions for labor and for mental labor. Concepts and distinctions applicable to physical and mental labor are indicated, introducing the necessity of labor for survival, the idea of technology as a human ...

  16. Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

    Directory of Open Access Journals (Sweden)

    جواد رنجبر

    2009-12-01

    Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

  17. RELAP5 Model Description and Validation for the BR2 Loss-of-Flow Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Licht, J. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Dionne, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Van den Branden, G. [Argonne National Lab. (ANL), Argonne, IL (United States); Sikik, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Koonen, E. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-07-01

    This paper presents a description of the RELAP5 model, the calibration method used to obtain the minor loss coefficients from the available hydraulic data and the LOFA simulation results compared to the 1963 experimental tests for HEU fuel.

  18. ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Gorpani, B.

    2000-01-01

    into the cask unloading pool. In the cask unloading pool the DPC is removed from the cask and placed in an overpack and the DPC lid is severed and removed. Assemblies are removed from either an open cask or DPC and loaded into assembly baskets positioned in the basket staging rack in the assembly unloading pool. A method called ''blending'' is utilized to load DCs with a heat output of less than 11.8 kW. This involves combining hotter and cooler assemblies from different baskets. Blending requires storing some of the hotter fuel assemblies in fuel-blending inventory pools until cooler assemblies are available. The assembly baskets are then transferred from the basket staging rack to the assembly handling cell and loaded into the assembly drying vessels. After drying, the assemblies are removed from the assembly drying vessels and loaded into a DC positioned below the DC load port. After installation of a DC inner lid and temporary sealing device, the DC is transferred to the DC decontamination cell where the top area of the DC, the DC lifting collar, and the DC inner lid and temporary sealing device are decontaminated, and the DC is evacuated and backfilled with inert gas to prevent prolonged clad exposure to air. The DC is then transferred to the Disposal Container Handling System for lid welding. In another cask preparation and decontamination area, lids are replaced on the empty transportation casks and DPC overpacks, the casks and DPC overpacks are decontaminated, inspected, and transferred to the Carrier/Cask Handling System for shipment off-site. All system equipment is designed to facilitate manual or remote operation, decontamination, and maintenance. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks and DPCs. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling

  19. JSC Orbital Debris Website Description

    Science.gov (United States)

    Johnson, Nicholas L.

    2006-01-01

    required. These data also help in the analysis and interpretation of impact features on returned spacecraft surfaces. 4) Mitigation - Controlling the growth of the orbital debris population is a high priority for NASA, the United States, and the major space-faring nations of the world to preserve near-Earth space for future generations. Mitigation measures can take the form of curtailing or preventing the creation of new debris, designing satellites to withstand impacts by small debris, and implementing operational procedures ranging from utilizing orbital regimes with less debris, adopting specific spacecraft attitudes, and even maneuvering to avoid collisions with debris. Downloadable items include several documents in PDF format and executable software.and 5) Reentry - Because of the increasing number of objects in space, NASA has adopted guidelines and assessment procedures to reduce the number of non-operational spacecraft and spent rocket upper stages orbiting the Earth. One method of postmission disposal is to allow reentry of these spacecraft, either from orbital decay (uncontrolled entry) or with a controlled entry. Orbital decay may be achieved by firing engines to lower the perigee altitude so that atmospheric drag will eventually cause the spacecraft to enter. However, the surviving debris impact footprint cannot be guaranteed to avoid inhabited landmasses. Controlled entry normally occurs by using a larger amount of propellant with a larger propulsion system to drive the spacecraft to enter the atmosphere at a steeper flight path angle. It will then enter at a more precise latitude, longitude, and footprint in a nearly uninhabited impact region, generally located in the ocean.

  20. Analytical methods used at model facility

    International Nuclear Information System (INIS)

    Wing, N.S.

    1984-01-01

    A description of analytical methods used at the model LEU Fuel Fabrication Facility is presented. The methods include gravimetric uranium analysis, isotopic analysis, fluorimetric analysis, and emission spectroscopy

  1. Efficient 3D frequency response modeling with spectral accuracy by the rapid expansion method

    KAUST Repository

    Chu, Chunlei

    2012-07-01

    Frequency responses of seismic wave propagation can be obtained either by directly solving the frequency domain wave equations or by transforming the time domain wavefields using the Fourier transform. The former approach requires solving systems of linear equations, which becomes progressively difficult to tackle for larger scale models and for higher frequency components. On the contrary, the latter approach can be efficiently implemented using explicit time integration methods in conjunction with running summations as the computation progresses. Commonly used explicit time integration methods correspond to the truncated Taylor series approximations that can cause significant errors for large time steps. The rapid expansion method (REM) uses the Chebyshev expansion and offers an optimal solution to the second-order-in-time wave equations. When applying the Fourier transform to the time domain wavefield solution computed by the REM, we can derive a frequency response modeling formula that has the same form as the original time domain REM equation but with different summation coefficients. In particular, the summation coefficients for the frequency response modeling formula corresponds to the Fourier transform of those for the time domain modeling equation. As a result, we can directly compute frequency responses from the Chebyshev expansion polynomials rather than the time domain wavefield snapshots as do other time domain frequency response modeling methods. When combined with the pseudospectral method in space, this new frequency response modeling method can produce spectrally accurate results with high efficiency. © 2012 Society of Exploration Geophysicists.

  2. Inadequate description of educational interventions in ongoing randomized controlled trials

    Directory of Open Access Journals (Sweden)

    Pino Cécile

    2012-05-01

    Full Text Available Abstract Background The registration of clinical trials has been promoted to prevent publication bias and increase research transparency. Despite general agreement about the minimum amount of information needed for trial registration, we lack clear guidance on descriptions of non-pharmacologic interventions in trial registries. We aimed to evaluate the quality of registry descriptions of non-pharmacologic interventions assessed in ongoing randomized controlled trials (RCTs of patient education. Methods On 6 May 2009, we searched for all ongoing RCTs registered in the 10 trial registries accessible through the World Health Organization International Clinical Trials Registry Platform. We included trials evaluating an educational intervention (that is, designed to teach or train patients about their own health and dedicated to participants, their family members or home caregivers. We used a standardized data extraction form to collect data related to the description of the experimental intervention, the centers, and the caregivers. Results We selected 268 of 642 potentially eligible studies and appraised a random sample of 150 records. All selected trials were registered in 4 registers, mainly ClinicalTrials.gov (61%. The median [interquartile range] target sample size was 205 [100 to 400] patients. The comparator was mainly usual care (47% or active treatment (47%. A minority of records (17%, 95% CI 11 to 23% reported an overall adequate description of the intervention (that is, description that reported the content, mode of delivery, number, frequency, duration of sessions and overall duration of the intervention. Further, for most reports (59%, important information about the content of the intervention was missing. The description of the mode of delivery of the intervention was reported for 52% of studies, the number of sessions for 74%, the frequency of sessions for 58%, the duration of each session for 45% and the overall duration for 63

  3. Time-dependent description of quantum interference nanotransistor

    International Nuclear Information System (INIS)

    Konopka, M.; Bokes, P.

    2012-01-01

    In this contribution we have presented simulations of electron current response to applied gate potentials in a ring-shaped quantum interference device. Such device could function like a current-switching quantum-interference transistor. We demonstrated capability of our approach to describe this kind of system keeping full quantum coherence in the description for extended periods of time. This have been achieved thanks to the unique feature of our method which allows for explicit simulations of small quantum subsystems with open boundary conditions. Further generalisation of the method is needed to reduce the number of basis set functions required to describe the system. (authors)

  4. Choosing a suitable sample size in descriptive sampling

    International Nuclear Information System (INIS)

    Lee, Yong Kyun; Choi, Dong Hoon; Cha, Kyung Joon

    2010-01-01

    Descriptive sampling (DS) is an alternative to crude Monte Carlo sampling (CMCS) in finding solutions to structural reliability problems. It is known to be an effective sampling method in approximating the distribution of a random variable because it uses the deterministic selection of sample values and their random permutation,. However, because this method is difficult to apply to complex simulations, the sample size is occasionally determined without thorough consideration. Input sample variability may cause the sample size to change between runs, leading to poor simulation results. This paper proposes a numerical method for choosing a suitable sample size for use in DS. Using this method, one can estimate a more accurate probability of failure in a reliability problem while running a minimal number of simulations. The method is then applied to several examples and compared with CMCS and conventional DS to validate its usefulness and efficiency

  5. Spacetime quantum probabilities II: Relativized descriptions and Popperian propensities

    Science.gov (United States)

    Mugur-Schächter, M.

    1992-02-01

    In the first part of this work(1) we have explicated the spacetime structure of the probabilistic organization of quantum mechanics. We have shown that each quantum mechanical state, in consequence of the spacetime characteristics of the epistemic operations by which the observer produces the state to be studied and the processes of qualification of these, brings in a tree-like spacetime structure, a “quantum mechanical probability tree,” that transgresses the theory of probabilities as it now stands. In this second part we develop the general implications of these results. Starting from the lowest level of cognitive action and creating an appropriate symbolism, we construct a “relativizing epistemic syntax,” a “general method of relativized conceptualization” where—systematically—each description is explicitly referred to the epistemic operations by which the observer produces the entity to be described and obtains qualifications of it. The method generates a typology of increasingly complex relativized descriptions where the question of realism admits of a particularly clear pronouncement. Inside this typology the epistemic processes that lie—UNIVERSALLY—at the basis of any conceptualization, reveal a tree-like spacetime structure. It appears in particular that the spacetime structure of the relativized representation of a probabilistic description, which transgresses the nowadays theory of probabilities, is the general mould of which the quantum mechanical probability trees are only particular realizations. This entails a clear definition of the descriptional status of quantum mechanics. While the recognition of the universal cognitive content of the quantum mechanical formalism opens up vistas toward mathematical developments of the relativizing epistemic syntax. The relativized representation of a probabilistic description leads with inner necessity to a “morphic” interpretation of probabilities that can be regarded as a formalized and

  6. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  7. An object model for beamline descriptions

    International Nuclear Information System (INIS)

    Hill, B.W.; Martono, H.; Gillespie, J.S.

    1997-01-01

    Translation of beamline model descriptions between different accelerator codes presents a unique challenge due to the different representations used for various elements and subsystems. These differences range from simple units conversions to more complex translations involving multiple beamline components. A representation of basic accelerator components is being developed in order to define a meta-structure from which beamline models, in different codes, can be described and to facilitate the translation of models between these codes. Sublines of basic components will be used to represent more complex beamline descriptions and bridge the gap between codes which may represent a beamline element as a single entity, and those which use multiple elements to describe the same physical device. A C++ object model for supporting this beamline description and a grammar for describing beamlines in terms of these components is being developed. The object model will support a common graphic user interface and translation filters for representing native beamline descriptions for a variety of accelerator codes. An overview of our work on the object model for beamline descriptions is presented here. copyright 1997 American Institute of Physics

  8. Descriptive and analytic epidemiology. Bridges to cancer control

    International Nuclear Information System (INIS)

    Mettlin, C.

    1988-01-01

    Epidemiology serves as a bridge between basic science and cancer control. The two major orientations of epidemiology are descriptive and analytic. The former is useful in assessing the scope and dimensions of the cancer problem and the latter is used to assess environmental and lifestyle sources of cancer risk. A recent development in descriptive epidemiology is the use of functional measures of disease such as lost life expectancy. In analytical epidemiology, there is new or renewed interest in several lifestyle factors including diet and exercise as well as environmental factors such as involuntary tobacco exposure and radon in dwellings. Review of the evidence should consider the strengths and weaknesses of different research procedures. Each method is inconclusive by itself but, the different research designs of epidemiology collectively may represent a hierarchy of proof. Although the roles of many factors remain to be defined, the aggregate epidemiologic data continue to demonstrate the special importance of personal behavior and lifestyle in affecting cancer risk

  9. Telidon Videotex presentation level protocol: Augmented picture description instructions

    Science.gov (United States)

    Obrien, C. D.; Brown, H. G.; Smirle, J. C.; Lum, Y. F.; Kukulka, J. Z.; Kwan, A.

    1982-02-01

    The Telidon Videotex system is a method by which graphic and textual information and transactional services can be accessed from information sources by the general public. In order to transmit information to a Telidon terminal at a minimum bandwidth, and in a manner independent of the type of communications channel, a coding scheme was devised which permits the encoding of a picture into the geometric drawing elements which compose it. These picture description instructions are an alpha geometric coding model and are based on the primitives of POINT, LINE, ARC, RECTANGLE, POLYGON, and INCREMENT. Text is encoded as (ASCII) characters along with a supplementary table of accents and special characters. A mosaic shape table is included for compatibility. A detailed specification of the coding scheme and a description of the principles which make it independent of communications channel and display hardware are provided.

  10. Quantum description of spin tunneling in magnetic molecules

    Science.gov (United States)

    Galetti, D.

    2007-01-01

    Starting from a phenomenological Hamiltonian originally written in terms of angular momentum operators we derive a new quantum angle-based Hamiltonian that allows for a discussion on the quantum spin tunneling. The study of the applicability of the present approach, carried out in calculations with a soluble quasi-spin model, shows that we are allowed to use our method in the description of physical systems such as the Mn12-acetate molecule, as well as the octanuclear iron cluster, Fe8, in a reliable way. With the present description the interpretation of the spin tunneling is seen to be direct, the spectra and energy barriers of those systems are obtained, and it is shown that they agree with the experimental ones.

  11. On the description of fault-tolerant systems

    International Nuclear Information System (INIS)

    Syrbe, M.

    1980-01-01

    Various demands by increasing complexity and the disposability of new technologies, like the One-chip-microcomputer and fiber optics, lead to control systems, which are built as decentralized distributed multi-microcomputersystems. They realize not only new control functions but they also open possibilities to increase availability by fault-tolerance. The design or the selection and lay-out of such systems require a quantitative description of these systems. This is possible on the bases of the set of hardware and software moduls of the system by the use of queuing models, reliability nets and diagnostic graphs. This is shown by an example of a practically applied Really Distributed Computer Control System (RDC-System). Computer aided methods for these system descriptions are emphasized. (orig.) [de

  12. Qualitative Description of Spatial Quality in Inclusive Architecture.

    Science.gov (United States)

    Ryhl, Camilla; Kajita, Masashi; Sørensen, René

    2016-01-01

    Universal design (UD) has gained global significance and is in the process of institutionalisation in the Nordic Region. This is despite an urgent necessity for developing the theoretical basis and practical applicability of UD. Reflecting this need for furthering the comprehensive understanding of spatial implication of UD, this paper aims to contribute for articulating a means to assess the quality of UD in architecture. Drawing upon numerous cases from research conducted at the Danish Building Research Institute, the paper focuses on sensory aspects of spatial quality, and discusses as well as reflects an applied method for producing the qualitative description of selected buildings that embody UD through creative solutions. The qualitative description of collected examples appears to be effective in delineating sensory aspects of spatial experience; however the systematic development of assessment criteria is essential in order to support students and designers to make responsible decisions in shaping built environments that are accessible and inclusive but also enjoyable.

  13. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  14. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  15. Effective fluid description of the dark universe

    Directory of Open Access Journals (Sweden)

    M. Cadoni

    2018-01-01

    Full Text Available We propose an effective anisotropic fluid description for a generic infrared-modified theory of gravity. In our framework, the additional component of the acceleration, commonly attributed to dark matter, is explained as a radial pressure generated by the reaction of the dark energy fluid to the presence of baryonic matter. Using quite general assumptions, and a microscopic description of the fluid in terms of a Bose–Einstein condensate of gravitons, we find the static, spherically symmetric solution for the metric in terms of the Misner–Sharp mass function and the fluid pressure. At galactic scales, we correctly reproduce the leading MOND-like log⁡(r and subleading (1/rlog⁡(r terms in the weak-field expansion of the potential. Our description also predicts a tiny (of order 10−6 for a typical spiral galaxy Machian modification of the Newtonian potential at galactic scales, which is controlled by the cosmological acceleration.

  16. CORECOOL, model description of the programme

    International Nuclear Information System (INIS)

    Andersen, J.G.M.; Abel-Larsen, H.

    1978-11-01

    CORECOOL, Convection and Radiation Emergency Cooling, is a model for the two-phase flow and heat transfer in a fuel element during the core heat-up phase following a loss of coolant accident. The model for the two-phase flow is based on a solution of the conservation equations with a separate description of the two phases and thermodynamic non-equilibrium. The flow-regimes considered are drop flow and film flow. The heat transfer consists of convection, sputtering and radiation heat transfer. The documentation of CORECOOL consists of four parts: I) model description, II) programme description (COMMERCIAL), III) users guide (COMMERCIAL) IV) verification (COMMERCIAL). CORECOOL is a joint project between Risoe National Laboratory Denmark and General Electric Company, San Jose, USA. (author)

  17. Towards reproducible descriptions of neuronal network models.

    Directory of Open Access Journals (Sweden)

    Eilen Nordlie

    2009-08-01

    Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

  18. Extended generalized Lagrangian multipliers for magnetohydrodynamics using adaptive multiresolution methods

    Directory of Open Access Journals (Sweden)

    Domingues M. O.

    2013-12-01

    Full Text Available We present a new adaptive multiresoltion method for the numerical simulation of ideal magnetohydrodynamics. The governing equations, i.e., the compressible Euler equations coupled with the Maxwell equations are discretized using a finite volume scheme on a two-dimensional Cartesian mesh. Adaptivity in space is obtained via Harten’s cell average multiresolution analysis, which allows the reliable introduction of a locally refined mesh while controlling the error. The explicit time discretization uses a compact Runge–Kutta method for local time stepping and an embedded Runge-Kutta scheme for automatic time step control. An extended generalized Lagrangian multiplier approach with the mixed hyperbolic-parabolic correction type is used to control the incompressibility of the magnetic field. Applications to a two-dimensional problem illustrate the properties of the method. Memory savings and numerical divergences of magnetic field are reported and the accuracy of the adaptive computations is assessed by comparing with the available exact solution.

  19. Fusion Engineering Device. Volume II. Design description

    International Nuclear Information System (INIS)

    1981-10-01

    This volume summarizes the design of the FED. It includes a description of the major systems and subsystems, the supporting plasma design analysis, a projected device cost and associated construction schedule, and a description of the facilities to house and support the device. This effort represents the culmination of the FY81 studies conducted at the Fusion Engineering Design Center (FEDC). Unique in these design activities has been the collaborative involvement of the Design Center personnel and numerous resource physicists from the fusion community who have made significant contributions in the physics design analysis as well as the physics support of the engineering design of the major FED systems and components

  20. Manifest domains:analysis and description

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2017-01-01

    _static_attribute, is_dynamic_attribute, is_inert_attribute, is_reactive_attribute, is_active_attribute, is_autonomous_attribute, is_biddable_attribute and is_programmable_attribute. The twist suggests ways of modeling “access” to the values of these kinds of attributes: the static attributes by simply “copying” them...... processes. C.A.R. Hoare series in computer science. Prentice-Hall International, London, 2004). We show how to model essential aspects of perdurants in terms of their signatures based on the concepts of endurants. And we show how one can “compile” descriptions of endurant parts into descriptions...

  1. The first accurate description of an aurora

    Science.gov (United States)

    Schröder, Wilfried

    2006-12-01

    As technology has advanced, the scientific study of auroral phenomena has increased by leaps and bounds. A look back at the earliest descriptions of aurorae offers an interesting look into how medieval scholars viewed the subjects that we study.Although there are earlier fragmentary references in the literature, the first accurate description of the aurora borealis appears to be that published by the German Catholic scholar Konrad von Megenberg (1309-1374) in his book Das Buch der Natur (The Book of Nature). The book was written between 1349 and 1350.

  2. Microscopic description of magnetized plasma: quasiparticle concept

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Decyk, V.K.

    1993-01-01

    A quasiparticle concept is developed systematically, from first principles, within the context of microscopic description of magnetized plasma. It is argued that the zeroth velocity-gyroangle harmonic of the microscopic particle distribution function under the gyrokinetic change of variables can be taken as a microscopic quasi-particle density in a reduced phase space. The nature of quasiparticles is discussed and equations of their motion are derived within both exact and reduced microscopic descriptions. The reduced one employs explicitly the separation of interesting time scales. (orig.)

  3. Characteristics of Qualitative Descriptive Studies: A Systematic Review.

    Science.gov (United States)

    Kim, Hyejin; Sefcik, Justine S; Bradway, Christine

    2017-02-01

    Qualitative description (QD) is a term that is widely used to describe qualitative studies of health care and nursing-related phenomena. However, limited discussions regarding QD are found in the existing literature. In this systematic review, we identified characteristics of methods and findings reported in research articles published in 2014 whose authors identified the work as QD. After searching and screening, data were extracted from the sample of 55 QD articles and examined to characterize research objectives, design justification, theoretical/philosophical frameworks, sampling and sample size, data collection and sources, data analysis, and presentation of findings. In this review, three primary findings were identified. First, although there were some inconsistencies, most articles included characteristics consistent with the limited available QD definitions and descriptions. Next, flexibility or variability of methods was common and effective for obtaining rich data and achieving understanding of a phenomenon. Finally, justification for how a QD approach was chosen and why it would be an appropriate fit for a particular study was limited in the sample and, therefore, in need of increased attention. Based on these findings, recommendations include encouragement to researchers to provide as many details as possible regarding the methods of their QD studies so that readers can determine whether the methods used were reasonable and effective in producing useful findings. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  4. Multi-GPU-based acceleration of the explicit time domain volume integral equation solver using MPI-OpenACC

    KAUST Repository

    Feki, Saber

    2013-07-01

    An explicit marching-on-in-time (MOT)-based time-domain volume integral equation (TDVIE) solver has recently been developed for characterizing transient electromagnetic wave interactions on arbitrarily shaped dielectric bodies (A. Al-Jarro et al., IEEE Trans. Antennas Propag., vol. 60, no. 11, 2012). The solver discretizes the spatio-temporal convolutions of the source fields with the background medium\\'s Green function using nodal discretization in space and linear interpolation in time. The Green tensor, which involves second order spatial and temporal derivatives, is computed using finite differences on the temporal and spatial grid. A predictor-corrector algorithm is used to maintain the stability of the MOT scheme. The simplicity of the discretization scheme permits the computation of the discretized spatio-temporal convolutions on the fly during time marching; no \\'interaction\\' matrices are pre-computed or stored resulting in a memory efficient scheme. As a result, most often the applicability of this solver to the characterization of wave interactions on electrically large structures is limited by the computation time but not the memory. © 2013 IEEE.

  5. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  6. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

  7. Pain perception description after advanced surface ablation

    Directory of Open Access Journals (Sweden)

    Sobas EM

    2017-04-01

    Full Text Available Eva M Sobas,1,2 Sebastián Videla,3,4 Amanda Vázquez,1 Itziar Fernández,1,5 Miguel J Maldonado,1 José-Carlos Pastor1,6,7 1Instituto Universitario de Oftalmobiología Aplicada (IOBA, Universidad de Valladolid, Valladolid, Spain; 2Facultad de Enfermería, Universidad de Valladolid, Valladolid Spain; 3Laboratorios Dr. Esteve S.A., Barcelona, Spain; 4Department of Experimental and Health Sciences, Facultad de Ciencias de la Salud y de la Vida, Universidad Pompeu Fabra, Barcelona, Spain; 5Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN, Valladolid, Spain; 6Department of Ophthalmology, Hospital Clínico Universitario, Valladolid, Spain; 7Department of Surgery, Ophthalmology, Otorhinolaryngology and Physiotherapy, Facultad de Medicina, Universidad de Valladolid, Valladolid, Spain Purpose: The objective of this study was to characterize the evolution of ocular pain after advanced surface ablation (ASA to improve strategies in postoperative pain management.Methods: This was a multicenter, prospective, descriptive, cohort study. The inclusion criteria were healthy individuals ≥18 years old receiving bilateral alcohol-assisted surface ablation with epithelial removal. Pain intensity was evaluated with the visual analog scale (VAS and the numeric pain rating scale before and after surgery. Comorbidities (photophobia, burning, tearing, and foreign body sensation and Hospital Anxiety and Depression (HAD questionnaire were evaluated before and at 6 hours after surgery. Postoperative treatments included cold patch, topical cold antibiotics, topical steroids, and benzodiazepines.Results: Thirty-two consecutive patients having similar profiles of postoperative pain evolution were included. At 0.5 hour after ASA, the pain score by VAS was 37±20 mm, and the maximum pain, 61±31 mm, occurred at 24 hours. Afterward, it decreased progressively until 72 hours after surgery (19±20 mm. Most patients (81% scored >60 mm, and

  8. Word Processing Job Descriptions and Duties.

    Science.gov (United States)

    Gajewski-Johnson, Marlyce

    In order to develop a word processing career file at Milwaukee Area Technical College, employment managers at 124 Milwaukee-area businesses were asked to provide job descriptions for all word processing positions in the company; skill and knowledge requirements necessary to obtain these positions; employee appraisal forms; wage scales; a list of…

  9. Effective lagrangian description on discrete gauge symmetries

    International Nuclear Information System (INIS)

    Banks, T.

    1989-01-01

    We exhibit a simple low-energy lagrangian which describes a system with a discrete remnant of a spontaneously broken continuous gauge symmetry. The lagrangian gives a simple description of the effects ascribed to such systems by Krauss and Wilczek: black holes carry discrete hair and interact with cosmic strings, and wormholes cannot lead to violation of discrete gauge symmetries. (orig.)

  10. Computer hardware description languages - A tutorial

    Science.gov (United States)

    Shiva, S. G.

    1979-01-01

    The paper introduces hardware description languages (HDL) as useful tools for hardware design and documentation. The capabilities and limitations of HDLs are discussed along with the guidelines needed in selecting an appropriate HDL. The directions for future work are provided and attention is given to the implementation of HDLs in microcomputers.

  11. Descriptive Developmental Research: Why Only Time?

    Science.gov (United States)

    Labouvie, Erich W.

    1975-01-01

    The usefulness of the concepts of cohort and time of measurement in descriptive developmental research was examined by comparing the time-specific cross-sectional and cohort-specific longitudinal age gradients of stable and unstable children. (Author/ED)

  12. Advisory processes and their descriptive data

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2005-01-01

    Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

  13. Applicability of the Organisational Climate Description Questionnaire

    African Journals Online (AJOL)

    ... Climate Description. Questionnaire – Rutgers Elementary: a South African case study ... educators of their work are determinants for the organizational climate of school. ... The article concludes with a number of recommendations on the use of the ... Region, one an Afrikaans- and the other an English-medium school.

  14. Some Dictionary Descriptions of Grammatical Structure | Branford ...

    African Journals Online (AJOL)

    This paper examines some points in the treatment of grammatical structure in four recent dictionaries of English as Ll. These are viewed against the background concepts of "Iexicogrammar" (Halliday 1978) and of the interdependence of lexicographical and syntactic descriptions of language. Its scope is necessari1y ...

  15. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...

  16. Improved motion description for action classification

    NARCIS (Netherlands)

    Jain, M.; Jégou, H.; Bouthemy, P.

    2016-01-01

    Even though the importance of explicitly integrating motion characteristics in video descriptions has been demonstrated by several recent papers on action classification, our current work concludes that adequately decomposing visual motion into dominant and residual motions, i.e., camera and scene

  17. Description of the Wetlands Research Programme

    CSIR Research Space (South Africa)

    Walmsley, RD

    1988-01-01

    Full Text Available This report presents a rationale to the development of a multidisciplinary South African Wetland Research Programme. A definition of what is meant by the term wetland is given along with a general description of what types of wetland occur in South...

  18. MPEG DASH SRD : Spatial Relationship Description

    NARCIS (Netherlands)

    Niamut, O.A.; Thomas, E.D.R.; D'Acunto, L.; Concolato, C.; Denoual, F.; Yong Lim, S.

    2016-01-01

    This paper presents the Spatial Representation Description (SRD)feature of the second amendment of MPEG DASH standard part 1, 23009-1:2014 [1]. SRD is an approach for streaming only spatial sub-parts of a video to display devices, in combination with the form of adaptive multi-rate streaming that is

  19. 49 CFR 587.13 - General description.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.13 General description. The offset deformable barrier is comprised of two elements: a fixed rigid barrier and...

  20. Journal bearing impedance descriptions for rotordynamic applications

    NARCIS (Netherlands)

    Childs, D.W.; Moes, H.; Leeuwen, van H.J.

    1977-01-01

    Bearing impedance vectors are introduced for plain journal bearings which define the bearing reaction force components as a function of the bearing motion. Impedance descriptions are developed directly for the approximate Ocvirk (short) and Sommerfeld (long) bearing solutions. The impedance vector

  1. 30 CFR 1.2 - Description.

    Science.gov (United States)

    2010-07-01

    ... MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OFFICIAL EMBLEM AND OMB CONTROL NUMBERS FOR RECORDKEEPING AND REPORTING MINE SAFETY AND HEALTH ADMINISTRATION; ESTABLISHMENT AND USE OF OFFICIAL EMBLEM § 1.2 Description. The emblem of the Mine Safety and Health Administration is of contemporary design...

  2. Descriptions of positron defect analysis capabilities

    International Nuclear Information System (INIS)

    Howell, R.H.

    1994-10-01

    A series of descriptive papers and graphics appropriate for distribution to potential collaborators has been assembled. These describe the capabilities for defect analysis using positron annihilation spectroscopy. The application of positrons to problems in the polymer and semiconductor industries is addressed

  3. Waste Management Systems Requirements and Descriptions (SRD)

    International Nuclear Information System (INIS)

    Conner, C.W.

    1986-01-01

    The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

  4. Optimization of neural network algorithm of the land market description

    Directory of Open Access Journals (Sweden)

    M. A. Karpovich

    2016-01-01

    Full Text Available The advantages of neural network technology is shown in comparison of traditional descriptions of dynamically changing systems, which include a modern land market. The basic difficulty arising in the practical implementation of neural network models of the land market and construction products is revealed It is the formation of a representative set of training and test examples. The requirements which are necessary for the correct description of the current economic situation has been determined, it consists in the fact that Train-paid-set in the feature space should not has the ranges with a low density of observations. The methods of optimization of empirical array, which allow to avoid the long-range extrapolation of data from range of concentration of the set of examples are formulated. It is shown that a radical method of optimization a set of training and test examples enclosing to collect supplemantary information, is associated with significant costs time and resources for the economic problems and the ratio of cost / efficiency is less efficient than an algorithm optimization neural network models the earth market fixed set of empirical data. Algorithm of optimization based on the transformation of arrays of information which represents the expansion of the ranges of concentration of the set of examples and compression the ranges of low density of observations is analyzed in details. The significant reduction in the relative error of land price description is demonstrated on the specific example of Voronezh region market of lands which intend for road construction, it makes the using of radical method of empirical optimization of the array costeffective with accounting the significant absolute value of the land. The high economic efficiency of the proposed algorithms is demonstrated.

  5. Quantum reflection of fast atoms from insulator surfaces: Eikonal description

    Energy Technology Data Exchange (ETDEWEB)

    Gravielle, M S; Miraglia, J E, E-mail: msilvia@iafe.uba.a, E-mail: miraglia@iafe.uba.a [Instituto de Astronomia y Fisica del Espacio, CONICET, Casilla de Correo 67, Sucursal 28, 1428 Buenos Aires (Argentina) and Dpto. de Fisica, FCEN, Universidad de Buenos Aires (Argentina)

    2009-11-01

    Interference effects recently observed in grazing scattering of swift atoms from insulator surfaces are studied within a distorted-wave method - the surface eikonal approximation. This approach makes use of the eikonal wave function, involving axial channeled trajectories. The theory is applied to helium atoms colliding with a LiF(001) surface along low-index crystallographic directions. The roles played by the projectile polarization and the surface rumpling are investigated, finding that both effects are important for the description of the experimental projectile distributions.

  6. Europlexus: a domain decomposition method in explicit dynamics

    International Nuclear Information System (INIS)

    Faucher, V.; Hariddh, Bung; Combescure, A.

    2003-01-01

    Explicit time integration methods are used in structural dynamics to simulate fast transient phenomena, such as impacts or explosions. A very fine analysis is required in the vicinity of the loading areas but extending the same method, and especially the same small time-step, to the whole structure frequently yields excessive calculation times. We thus perform a dual Schur domain decomposition, to divide the global problem into several independent ones, to which is added a reduced size interface problem, to ensure connections between sub-domains. Each sub-domain is given its own time-step and its own mesh fineness. Non-matching meshes at the interfaces are handled. An industrial example demonstrates the interest of our approach. (authors)

  7. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  8. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  9. Unsupervised Idealization of Ion Channel Recordings by Minimum Description Length

    DEFF Research Database (Denmark)

    Gnanasambandam, Radhakrishnan; Nielsen, Morten S; Nicolai, Christopher

    2017-01-01

    and characterize an idealization algorithm based on Rissanen's Minimum Description Length (MDL) Principle. This method uses minimal assumptions and idealizes ion channel recordings without requiring a detailed user input or a priori assumptions about channel conductance and kinetics. Furthermore, we demonstrate...... that correlation analysis of conductance steps can resolve properties of single ion channels in recordings contaminated by signals from multiple channels. We first validated our methods on simulated data defined with a range of different signal-to-noise levels, and then showed that our algorithm can recover...... channel currents and their substates from recordings with multiple channels, even under conditions of high noise. We then tested the MDL algorithm on real experimental data from human PIEZO1 channels and found that our method revealed the presence of substates with alternate conductances....

  10. 48 CFR 52.214-21 - Descriptive Literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means information...

  11. Descriptive catalogue of radioactive waste families

    International Nuclear Information System (INIS)

    2004-01-01

    This document describes the different types of radioactive wastes produced in France or which are expected to be produced in the future. The wastes have been shared into different families having similar characteristics. A description is made for each family: general presentation, photos, position of the family in the French classification, industrial origin, status of production. Some informations about the raw waste and its conditioning process are also given. The qualitative description is completed by some numerical data like: the quantity produced in the past and to be produced in the future, the evaluation of the radioactivity in 2002 and 2020, and the evaluation of the thermal power when it exists. Finally, some informations are given about the risk of toxicity of some chemical species or compounds. (J.S.)

  12. Parametric description of the quantum measurement process

    Science.gov (United States)

    Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

    2015-08-01

    We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

  13. System Design Description PFP Thermal Stabilization

    International Nuclear Information System (INIS)

    RISENMAY, H.R.

    2000-01-01

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures

  14. A Modal Description of Multiport Antennas

    Directory of Open Access Journals (Sweden)

    Jonathan J. Lynch

    2011-01-01

    Full Text Available This paper presents a modal description of multiport antennas that leads directly to a rigorous network representation and simple quadratic expressions for gain, efficiency, and effective area. The analysis shows that the transmitting and receiving properties of an element antenna array are exactly described by a 2×2 element scattering matrix together with a set of orthonormal mode functions and accounts for effects such as mutual coupling, scattering, reflection, and losses. The approach is quite general, only requiring that the antenna be finite and reciprocal. The scattering network description simplifies accounting of power flow while retaining a close connection to the physical antenna characteristics. The orthonormal mode functions provide a complete basis for radiated and received fields, facilitating beamforming. The theory provides rigorous definitions of input-output signals and links them to the underlying electromagnetics in a straightforward manner.

  15. Combinatorial description of space and strong interactions

    International Nuclear Information System (INIS)

    Zenczykowski, P.

    1988-01-01

    A reinterpretation is given of a successful phenomenological approach to hadron self-energy effects known as the unitarized quark model. General arguments are given that the proper description of strong interactions may require abandoning the assignment of a primary role to continuous concepts such as position and momentum in favor of discrete ones such as spin or W-spin. The reinterpretation exploits an analogy between the W-spin diagrams occurring in the calculations of hadronic loop effects and the spin network idea of Penrose. A connection between the S-matrix approach to hadron masses and the purely algebraic approach characteristic of the quark model is indicated. Several hadron mass relations generated by a resulting SU(6)/sub w/-group-theoretic expression are presented and discussed. Results of an attempt to generalize the scheme to the description of hadron vertices are reported

  16. Hydrogen electrode reaction: A complete kinetic description

    International Nuclear Information System (INIS)

    Quaino, P.M.; Gennero de Chialvo, M.R.; Chialvo, A.C.

    2007-01-01

    The kinetic description of the hydrogen electrode reaction (HER) in the whole range of overpotentials (-0.2 < η (V) < 0.40) is presented. The Volmer-Heyrovsky-Tafel mechanism was solved considering simultaneously the following items: (i) the diffusional contribution of the molecular hydrogen from and towards the electrode surface, (ii) the forward and backward reaction rates of each elementary step and (iii) a Frumkin type adsorption for the reaction intermediate. In order to verify the descriptive capability of the kinetic expressions derived, an experimental study of the HER was carried out on a rotating platinum disc electrode in acid solution. From the correlation of these results the elementary kinetic parameters were evaluated and several aspects related to the kinetic mechanism were discussed. Finally, the use of these kinetic expressions to interpret results obtained on microelectrodes is also analysed

  17. XML for Detector Description at GLAST

    Energy Technology Data Exchange (ETDEWEB)

    Bogart, Joanne

    2002-04-30

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. This paper describes its use for a GLAST detector.

  18. RSYST - a short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    1976-04-01

    The modular system RSYST is used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic experssions. Sections of the user language may be stored in the data base and activated at any time. (orig.) [de

  19. Unified geometric description of black hole thermodynamics

    International Nuclear Information System (INIS)

    Alvarez, Jose L.; Quevedo, Hernando; Sanchez, Alberto

    2008-01-01

    In the space of thermodynamic equilibrium states we introduce a Legendre invariant metric which contains all the information about the thermodynamics of black holes. The curvature of this thermodynamic metric becomes singular at those points where, according to the analysis of the heat capacities, phase transitions occur. This result is valid for the Kerr-Newman black hole and all its special cases and, therefore, provides a unified description of black hole phase transitions in terms of curvature singularities.

  20. Salt Block II: description and results

    International Nuclear Information System (INIS)

    Hohlfelder, J.J.

    1980-06-01

    A description of and results from the Salt Block II experiment, which involved the heating of and measurement of water transport within a large sample of rock salt, are presented. These results include the measurement of water released into a heated borehole in the sample as well as measured temperatures within the salt. Measured temperatures are compared with the results of a mathematical model of the experiment

  1. Thin film description by wavelet coefficients statistics

    Czech Academy of Sciences Publication Activity Database

    Boldyš, Jiří; Hrach, R.

    2005-01-01

    Roč. 55, č. 1 (2005), s. 55-64 ISSN 0011-4626 Grant - others:GA UK(CZ) 173/2003 Institutional research plan: CEZ:AV0Z10750506 Keywords : thin films * wavelet transform * descriptors * histogram model Subject RIV: BD - Theory of Information Impact factor: 0.360, year: 2005 http://library.utia.cas.cz/separaty/2009/ZOI/boldys-thin film description by wavelet coefficients statistics .pdf

  2. 1993 baseline solid waste management system description

    International Nuclear Information System (INIS)

    Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

    1994-02-01

    Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford's solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents

  3. A phenomenological calculus of Wiener description space.

    Science.gov (United States)

    Richardson, I W; Louie, A H

    2007-10-01

    The phenomenological calculus is a categorical example of Robert Rosen's modeling relation. This paper is an alligation of the phenomenological calculus and generalized harmonic analysis, another categorical example. Our epistemological exploration continues into the realm of Wiener description space, in which constitutive parameters are extended from vectors to vector-valued functions of a real variable. Inherent in the phenomenology are fundamental representations of time and nearness to equilibrium.

  4. XML for detector description at GLAST

    International Nuclear Information System (INIS)

    Bogart, J.; Favretto, D.; Giannitrapani, R.

    2001-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. The author describes its use for a GLAST detector

  5. XML for Detector Description at GLAST

    International Nuclear Information System (INIS)

    Bogart, Joanne

    2002-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. This paper describes its use for a GLAST detector

  6. Descriptive studies of Purepecha: Introductory study

    Directory of Open Access Journals (Sweden)

    Violeta Vázquez Rojas Maldonado

    2013-12-01

    Full Text Available Seven papers in this volume are the result of a collective project of linguistic description. This introduction offers a general background for such enterprise. It provides information about some sociolinguistic and grammatical aspects of the Purepecha language, a list of some recent studies on the language, it describes the orthographic conventions employed. We also provide details about the elicitation methodology and the demographic information of the language consultants.

  7. Simple Parametric Model for Airfoil Shape Description

    Science.gov (United States)

    Ziemkiewicz, David

    2017-12-01

    We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

  8. Description of the Lewin Natural Gas Model

    International Nuclear Information System (INIS)

    Kuuskraa, V.; Godec, M.

    1989-01-01

    This paper provides a brief description of the Lewin Natural Gas Model, shows how this model differs in key features from the other models participating in EMF-9, and describes how the different modeling scenarios analyzed in EMF-9 were implemented in the Lewin model. This background helps explain the key results that have been gained from applying the Lewin model to the EMF scenarios

  9. SNF/HLW Transfer System Description Document

    International Nuclear Information System (INIS)

    W. Holt

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF)/high-level radioactive waste (HLW) transfer system and associated bases, which will allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in this SDD reflects the current results of the design process

  10. A description of LUSTRA's common field sites

    International Nuclear Information System (INIS)

    Berggren, Dan; Bergkvist, Bo; Johansson, Maj-Britt; Melkerud, Per-Arne; Nilsson, Aake; Olsson, Mats; Langvall, Ola; Majdi, Hooshang; Weslien, Per

    2004-01-01

    arena, and thus LUSTRA has gradually put more focus on the Kyoto process. LUSTRA was evaluated during spring 2002 and the general overall statement was that 'The ambitious goals of the LUSTRA program are very good and seem to be well understood by the participating researchers. However, for a second phase a focus on synthesis and synergy is recommended'. In LUSTRA we are performing integrated research on C fluxes at three common field sites (CFS) situated in a south-north transect in Sweden: Asa, Knottaasen and Flakaliden. Measurements started summer 2000. The intention was to establish a climate gradient through Sweden but keep other environmental parameters rather similar. Also within each site the ambition was to get a hydrological gradient going from dry, over mesic to moist conditions, i.e. from deep lying ground water level to shallow groundwater. According to the advises by the reviewers of LUSTRA phase 1, more focus will be on syntheses during LUSTRA phase 2 (2003-2006). However, measurements at the CFS will be continued during 2003 and 2004. The objectives of this paper are (i) to give a general description of the sites, (ii) to describe the abiotic measurements made at the different sites, including the data base, (iii) to describe the methods used to obtain background information about soils and vegetation (C pools and fluxes) and (iv) to present the background information about soils and vegetation

  11. Ecosystem description of a drainage area - a strategy in biosphere descriptions during site investigations for a repository of spent nuclear fuel

    International Nuclear Information System (INIS)

    Lindborg, T.; Lofgren, A.

    2004-01-01

    During the next few years the Swedish Nuclear Fuel and Waste Management Co. (SKB) performs site investigations at two sites in Sweden for a future repository of spent nuclear fuel. Novel methods based on systems and landscape ecology are developed to understand and model the radionuclide flow in the biosphere using site specific data for a safety assessment. This work describes the strategy for development of a descriptive ecosystem model for the surface ecosystem. The site description is needed to: a) perform a safety assessment that describes and analyzes different scenarios for radionuclide releases into the ecosystem and possible pathways for dispersal or accumulation radionuclides in the ecosystem, b) detect changes caused by the construction of a repository, c) establish a baseline for detecting long-term effects of the repository. The description adopts a site-specific approach focusing on the quantification of the properties that will constitute the descriptive model. The aim is also to present the methodology for determining the properties, to describe the development of the framework for the descriptive ecosystem models by integrating use of different properties, and finally, to present vital data from other site descriptive models such as those for geology or hydrogeology. The safety assessment will use an approach, among other methods, where transport and accumulation of radionuclides will be modelled by quantifying biogeochemical pathways of matter. The descriptive ecosystem model applied to the site was therefore built to describe and quantify processes affecting i.e. turnover of matter in a drainage area. The conclusions from applying this approach was that by have estimating the flow of matter the ecological and physical constrains on the system reduces the potential variations in outcome of future states of the ecosystem and thus also reduces the uncertainties in estimating radionuclide flow and consequences to humans and the environment. (author)

  12. Horizons of description: Black holes and complementarity

    Science.gov (United States)

    Bokulich, Peter Joshua Martin

    Niels Bohr famously argued that a consistent understanding of quantum mechanics requires a new epistemic framework, which he named complementarity . This position asserts that even in the context of quantum theory, classical concepts must be used to understand and communicate measurement results. The apparent conflict between certain classical descriptions is avoided by recognizing that their application now crucially depends on the measurement context. Recently it has been argued that a new form of complementarity can provide a solution to the so-called information loss paradox. Stephen Hawking argues that the evolution of black holes cannot be described by standard unitary quantum evolution, because such evolution always preserves information, while the evaporation of a black hole will imply that any information that fell into it is irrevocably lost---hence a "paradox." Some researchers in quantum gravity have argued that this paradox can be resolved if one interprets certain seemingly incompatible descriptions of events around black holes as instead being complementary. In this dissertation I assess the extent to which this black hole complementarity can be undergirded by Bohr's account of the limitations of classical concepts. I begin by offering an interpretation of Bohr's complementarity and the role that it plays in his philosophy of quantum theory. After clarifying the nature of classical concepts, I offer an account of the limitations these concepts face, and argue that Bohr's appeal to disturbance is best understood as referring to these conceptual limits. Following preparatory chapters on issues in quantum field theory and black hole mechanics, I offer an analysis of the information loss paradox and various responses to it. I consider the three most prominent accounts of black hole complementarity and argue that they fail to offer sufficient justification for the proposed incompatibility between descriptions. The lesson that emerges from this

  13. The Effectiveness of FRESH Technique to Teach Descriptive Paragraph

    Directory of Open Access Journals (Sweden)

    Faisal Faisal

    2013-11-01

    Full Text Available This study was aimed at knowing the effectiveness of FRESH technique in teaching descriptive paragraph. The method of this study was quasi experimental method. This study was conducted at one of the state madrasah aliyah in academic year 2012/2013. The total sample of this study was 78 respondents divided into two groups: the control class with no treatment and the experimental class with FRESH technique. The data collection technique used essay tests for pre-test and post-test. The evaluation covered content, organization, vocabulary, style, and mechanic. After data analyses, the students in the experimental class had better achievement than those in the control class. The result of t-test computation was 1.968, with t-table value = 1.664 at the significant level α = 0.05. The t-test result was higher than the value of t-table (1.968 > 1.664. It meant that the hypothesis was accepted or FRESH technique was effective in teaching descriptive paragraph to the students of that school in academic year 2012/2013.

  14. Uniform in Time Description for Weak Solutions of the Hopf Equation with Nonconvex Nonlinearity

    Directory of Open Access Journals (Sweden)

    Antonio Olivas Martinez

    2009-01-01

    Full Text Available We consider the Riemann problem for the Hopf equation with concave-convex flux functions. Applying the weak asymptotics method we construct a uniform in time description for the Cauchy data evolution and show that the use of this method implies automatically the appearance of the Oleinik E-condition.

  15. The description of N=1, d=4 supergravity using twisted supersymmetric fields

    CERN Document Server

    Baulieu, Laurent

    2015-01-01

    This chapter describes how the method of twisted supersymmetric fields used for describing global supersymmetry, as in the context of topological field theories, can be extended to the description of local supersymmetry. As an example, the method is applied to the case of N = 1 Euclidean supergravity on a 4-manifold with an almost complex structure, with its couplings to scalar and vector multiplets.

  16. Quality of reporting of descriptive studies in implant dentistry. Critical aspects in design, outcome assessment and clinical relevance

    NARCIS (Netherlands)

    Meijer, Henny J. A.; Raghoebar, Gerry M.

    Objectives: The aim of this study was to conduct a review on quality of reporting on descriptive studies in implant dentistry using the STROBE Statement and to analyse possible changes in quality of reporting on descriptive studies in implant dentistry over time. Material and Methods: A hand search

  17. Descriptive Epidemiology of Female Breast Cancer in Tianjin, China

    Institute of Scientific and Technical Information of China (English)

    KexinChen; MinHe; ShufenDong; JifangWang

    2004-01-01

    OBJECTIVE To observe trends in the changes of incidence and mortality of female breast cancer patients in Tianjin, and evaluate the effect of these trends on prevention. METHODS A method of descriptive epidemiology was used to comprehensively study the status of female breast cancer in Tianjin. RESULTS From 1981 to 2000, the incidence rate of breast cancer in Tianjin had been increasing at the speed of 1.8 % annually, whereas the peak of the age-adjusted incidence and mortality rate expressed a mild declining trend. Follow-up study indicated that 3 and 5-year survival rates improved in various degrees. CONCLUSION Early detection and diagnosis of breast cancer are very important to both increasing survival and lowering mortality from breast cancer. Preventive efforts should be promoted for women who are at high risk for breast cancer.

  18. Impedance planimetric description of normal rectoanal motility in humans

    DEFF Research Database (Denmark)

    Andersen, Inge S; Michelsen, Hanne B; Krogh, Klaus

    2007-01-01

    PURPOSE: Manometry and pressure-volume measurements are commonly used to study anorectal physiology. However, the methods are limited by several sources of error. Recently, a new impedance planimetric system has been introduced in a porcine model. It allows simultaneous determination of anorectal...... pressures and multiple rectal luminal cross-sectional areas. This study was designed to study normal human rectoanal motility by means of impedance planimetry with multiple rectal cross-sectional areas and rectal and anal pressure. METHODS: Twelve healthy volunteers (10 females), aged 24 to 53 years, were...... the experiment, the cross-sectional area at all channels showed strong cyclic contractile activity and the anal pressure increased by approximately 100 percent. CONCLUSIONS: The new rectal impedance planimetry system allows highly detailed description of rectoanal motility patterns. It has promise as a new...

  19. An introduction to descriptive statistics: A review and practical guide

    International Nuclear Information System (INIS)

    Marshall, Gill; Jonker, Leon

    2010-01-01

    This paper, the first of two, demonstrates why it is necessary for radiographers to understand basic statistical concepts both to assimilate the work of others and also in their own research work. As the emphasis on evidence-based practice increases, it will become more pressing for radiographers to be able to dissect other people's research and to contribute to research themselves. The different types of data that one can come across are covered here, as well as different ways to describe data. Furthermore, the statistical terminology and methods used that comprise descriptive statistics are explained, including levels of measurement, measures of central tendency (average), and dispersion (spread) and the concept of normal distribution. This paper reviews relevant literature, provides a checklist of points to consider before progressing with the application of appropriate statistical methods to a data set, and provides a glossary of relevant terms for reference.

  20. High Performance Descriptive Semantic Analysis of Semantic Graph Databases

    Energy Technology Data Exchange (ETDEWEB)

    Joslyn, Cliff A.; Adolf, Robert D.; al-Saffar, Sinan; Feo, John T.; Haglin, David J.; Mackey, Greg E.; Mizell, David W.

    2011-06-02

    As semantic graph database technology grows to address components ranging from extant large triple stores to SPARQL endpoints over SQL-structured relational databases, it will become increasingly important to be able to understand their inherent semantic structure, whether codified in explicit ontologies or not. Our group is researching novel methods for what we call descriptive semantic analysis of RDF triplestores, to serve purposes of analysis, interpretation, visualization, and optimization. But data size and computational complexity makes it increasingly necessary to bring high performance computational resources to bear on this task. Our research group built a novel high performance hybrid system comprising computational capability for semantic graph database processing utilizing the large multi-threaded architecture of the Cray XMT platform, conventional servers, and large data stores. In this paper we describe that architecture and our methods, and present the results of our analyses of basic properties, connected components, namespace interaction, and typed paths such for the Billion Triple Challenge 2010 dataset.

  1. Basic Finite Element Method

    International Nuclear Information System (INIS)

    Lee, Byeong Hae

    1992-02-01

    This book gives descriptions of basic finite element method, which includes basic finite element method and data, black box, writing of data, definition of VECTOR, definition of matrix, matrix and multiplication of matrix, addition of matrix, and unit matrix, conception of hardness matrix like spring power and displacement, governed equation of an elastic body, finite element method, Fortran method and programming such as composition of computer, order of programming and data card and Fortran card, finite element program and application of nonelastic problem.

  2. Quantum Description of Optical Devices Used in Interferometry

    Directory of Open Access Journals (Sweden)

    P. Kucera

    2007-09-01

    Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

  3. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  4. RSYST: short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    Since 1969, the modular system RSYST has been used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic expressions. Sections of the user language may be stored in the data base and activated at any time. Presently, an interactive version of the system is developed. It supports basic operations and interactive input checking on a front end computer

  5. Forsmark - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  6. PARR-2: reactor description and experiments

    International Nuclear Information System (INIS)

    Wyne, M.F.; Meghji, J.H.

    1990-12-01

    PARR-2 is a miniature neutron source reactor (MNSR) research reactor has been designed at the rate of 27 kW. Reactor assembly comprises of peaking characteristics with a self limiting flux. In this report reactor description with its assembly and instrumentation control system has been explained. The reactor engineering and physics experiments which can be performed on this reactor are explained in this report. PARR-2 is fueled with HEU fuel pins which are about 90% enriched in U-235. Specific requirements for the safety of the reactor, its building and the personnel, normal instrumentation as required in an industrial environment is sufficient. (A.B.)

  7. LCDD: A complete detector description package

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Norman, E-mail: Norman.Graf@slac.stanford.edu; McCormick, Jeremy, E-mail: Jeremy.McCormick@slac.stanford.edu

    2015-07-21

    LCDD has been developed to provide a complete detector description package for physics detector simulations using Geant4. All aspects of the experimental setup, such as the physical geometry, magnetic fields, and sensitive detector readouts, as well as control of the physics simulations, such as physics processes, interaction models and kinematic limits, are defined at runtime. Users are therefore able to concentrate on the design of the detector system without having to master the intricacies of C++ programming or being proficient in setting up their own Geant4 application. We describe both the XML-based file format and the processors which communicate this information to the underlying Geant4 simulation toolkit.

  8. The athena data dictionary and description language

    International Nuclear Information System (INIS)

    Bazan, A.; Ghez, P.; Le Flour, T.; Lieunard, S.; Tull, C.

    2001-01-01

    The authors have developed a data object description tool suite and service for Athena consisting of: a language grammar based upon an extended proper subset of IDL 2.0, a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface, and several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. The authors present here details of the work and experience to date on the Athena Definition Language and Athena Data Dictionary

  9. Chinese legal texts – Quantitative Description

    Directory of Open Access Journals (Sweden)

    Ľuboš GAJDOŠ

    2017-06-01

    Full Text Available The aim of the paper is to provide a quantitative description of legal Chinese. This study adopts the approach of corpus-based analyses and it shows basic statistical parameters of legal texts in Chinese, namely the length of a sentence, the proportion of part of speech etc. The research is conducted on the Chinese monolingual corpus Hanku. The paper also discusses the issues of statistical data processing from various corpora, e.g. the tokenisation and part of speech tagging and their relevance to study of registers variation.

  10. Hamiltonian description of the ideal fluid

    International Nuclear Information System (INIS)

    Morrison, P.J.

    1994-01-01

    Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems

  11. Modelling Imprecise Arguments in Description Logic

    Directory of Open Access Journals (Sweden)

    LETIA, I. A.

    2009-10-01

    Full Text Available Real arguments are a mixture of fuzzy linguistic variables and ontological knowledge. This paper focuses on modelling imprecise arguments in order to obtain a better interleaving of human and software agents argumentation, which might be proved useful for extending the number of real life argumentative-based applications. We propose Fuzzy Description Logic as the adequate technical instrumentation for filling the gap between human arguments and software agents arguments. A proof of concept scenario has been tested with the fuzzyDL reasoner.

  12. System design description PFP thermal stabilization

    International Nuclear Information System (INIS)

    RISENMAY, H.R.

    1998-01-01

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides

  13. Description of the Nuclear Training Centre

    International Nuclear Information System (INIS)

    Wagadarikar, V.K.

    1974-01-01

    The Department of Atomic Energy, Government of India has developed an on-going programme for constructing and operating heavy water moderated, natural uranium fuelled power stations of the CANDU-type. With the view to train personnel required for operation and maintenance of these stations, a Nuclear Training Centre has been set up at the site of the Rajasthan Atomic Power Station. A description of the nuclear training centre with its facilities is given. The training programme for engineers, operators, mechanical, electrical and control maintainers etc. is given in detail, along with the actual syllabi for respective courses. Examples of the typical field check list are provided. (K.B.)

  14. Multiple descriptions for packetized predictive control

    DEFF Research Database (Denmark)

    Østergaard, Jan; Quevedo, Daniel

    2016-01-01

    be reliably reconstructed at the plant side. For the particular case of LTI plant models and i.i.d. channels, we show that the overall system forms a Markov jump linear system. We provide conditions for mean square stability and derive upper bounds on the operational bit rate of the quantizer to guarantee......In this paper, we propose to use multiple descriptions (MDs) to achieve a high degree of robustness towards random packet delays and erasures in networked control systems. In particular, we consider the scenario, where a data-rate limited channel is located between the controller and the plant...

  15. On the methods and examples of aircraft impact analysis

    International Nuclear Information System (INIS)

    Arros, J.

    2012-01-01

    Conclusions: Aircraft impact analysis can be performed today within feasible run times using PCs and available advanced commercial finite element software tools. Adequate element and material model technologies exist. Explicit time integration enables analysis of very large deformation Missile/Target impacts. Meshless/particle based methods may be beneficial for large deformation concrete “punching shear” analysis – potentially solves the “element erosion” problem associated with FE, but are not generally implemented yet in major commercial software. Verification of the complicated modeling technologies continues to be a challenge. Not much work has been done yet on ACI shock loading – redundant and physically separated safety trains key to success. Analysis approach and detail should be “balanced” - commensurate with the significant uncertainties - do not “over-do” details of some parts of the model (e.g., the plane) and the analysis

  16. A Descriptive Study of Registers Found in Spoken and Written Communication (A Semantic Analysis

    Directory of Open Access Journals (Sweden)

    Nurul Hidayah

    2016-07-01

    Full Text Available This research is descriptive study of registers found in spoken and written communication. The type of this research is Descriptive Qualitative Research. In this research, the data of the study is register in spoken and written communication that are found in a book entitled "Communicating! Theory and Practice" and from internet. The data can be in the forms of words, phrases and abbreviation. In relation with method of collection data, the writer uses the library method as her instrument. The writer relates it to the study of register in spoken and written communication. The technique of analyzing the data using descriptive method. The types of register in this term will be separated into formal register and informal register, and identify the meaning of register.

  17. Analysis of laparoscopic port site complications: A descriptive study

    Directory of Open Access Journals (Sweden)

    Somu Karthik

    2013-01-01

    Full Text Available Context: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. Aims: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. Settings and Design: Prospective descriptive study. Materials and Methods: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. Statistical Analysis Used: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. Results: Of the 570 patients undergoing laparoscopic surgery, 17 (3% had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI was the most frequent (n = 10, 1.8%, followed by port site bleeding (n = 4, 0.7%, omentum-related complications (n = 2; 0.35%, and port site metastasis (n = 1, 0.175%. Conclusions: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit.

  18. Analysis of laparoscopic port site complications: A descriptive study

    Science.gov (United States)

    Karthik, Somu; Augustine, Alfred Joseph; Shibumon, Mundunadackal Madhavan; Pai, Manohar Varadaraya

    2013-01-01

    CONTEXT: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. AIMS: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. SETTINGS AND DESIGN: Prospective descriptive study. MATERIALS AND METHODS: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. STATISTICAL ANALYSIS USED: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. RESULTS: Of the 570 patients undergoing laparoscopic surgery, 17 (3%) had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI) was the most frequent (n = 10, 1.8%), followed by port site bleeding (n = 4, 0.7%), omentum-related complications (n = 2; 0.35%), and port site metastasis (n = 1, 0.175%). CONCLUSIONS: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit. PMID:23741110

  19. A new compiler for the GANIL Data Acquisition description

    International Nuclear Information System (INIS)

    Saillant, F.; Raine, B.

    1997-01-01

    An important feature of the GANIL Data Acquisition System is the description of the experiments by means of a language developed at GANIL. The philosophy is to attribute to each element (parameters, spectra, etc) an operational name which will be used at any level of the system. This language references a library of modules to free the user from the technical details of the hardware. This compiler has been recently entirely re-developed using technologies as the object-oriented language (C++) and object-oriented software development method and tool. This enables us to provide a new functionality or to support a new electronic module within a very short delay and without any deep modification of the application. A new Dynamic Library of Modules has been also developed. Its complete description is available on the GANIL WEB site http://ganinfo.in2p3.fr/acquisition/homepage.html. This new compiler brings a lot of new functionalities, among which the most important is the notion of 'register' whatever the module standard is. All the registers described in the module provider's documentation can now be accessed by their names. Another important new feature is the notion of 'function' that can be executed on a module. Also a set of new instructions has been implemented to execute commands on CAMAC crates. Another possibility of this new compiler is to enable the description of specific interfaces with GANIL Data Acquisition System. This has been used to describe the coupling of the CHIMERA Data Acquisition System with the INDRA one through a shared memory in the VME crate. (authors)

  20. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases