ARIES: A mobile robot inspector

International Nuclear Information System (INIS)

Byrd, J.S.

1995-01-01

ARIES (Autonomous Robotic Inspection Experimental System) is a mobile robot inspection system being developed for the Department of Energy (DOE) to survey and inspect drums containing mixed and low-level radioactive waste stored in warehouses at DOE facilities. The drums are typically stacked four high and arranged in rows with three-foot aisle widths. The robot will navigate through the aisles and perform an autonomous inspection operation, typically performed by a human operator. It will make real-time decisions about the condition of the drums, maintain a database of pertinent information about each drum, and generate reports

NPS ARIES Forward Look Sonar Integration

National Research Council Canada - National Science Library

Healey, A. J; Horner, D. P

2004-01-01

This work integrated an experimental Blazed Array Forward Looking Sonar (FLS) developed by the University of Washington, Applied Physics Laboratories into the ARIES autonomous underwater vehicle (AUV...

A systems analysis of the ARIES tokamak reactors

International Nuclear Information System (INIS)

Bathke, C.G.

1992-01-01

The multi-institutional ARIES study has completed a series of cost-of-electricity optimized conceptual designs of commercial tokamak fusion reactors that vary the assumed advances in technology and physics. A comparison of these designs indicates the cost benefit of various design options. A parametric systems analysis suggests a possible means to obtain a marginally competitive fusion reactor

Mechanical deployment system on aries an autonomous mobile robot

International Nuclear Information System (INIS)

Rocheleau, D.N.

1995-01-01

ARIES (Autonomous Robotic Inspection Experimental System) is under development for the Department of Energy (DOE) to survey and inspect drums containing low-level radioactive waste stored in warehouses at DOE facilities. This paper focuses on the mechanical deployment system-referred to as the camera positioning system (CPS)-used in the project. The CPS is used for positioning four identical but separate camera packages consisting of vision cameras and other required sensors such as bar-code readers and light stripe projectors. The CPS is attached to the top of a mobile robot and consists of two mechanisms. The first is a lift mechanism composed of 5 interlocking rail-elements which starts from a retracted position and extends upward to simultaneously position 3 separate camera packages to inspect the top three drums of a column of four drums. The second is a parallelogram special case Grashof four-bar mechanism which is used for positioning a camera package on drums on the floor. Both mechanisms are the subject of this paper, where the lift mechanism is discussed in detail

Enhanced 2/3 four-ary modulation code using soft-decision Viterbi decoding for four-level holographic data storage systems

Science.gov (United States)

Kong, Gyuyeol; Choi, Sooyong

2017-09-01

An enhanced 2/3 four-ary modulation code using soft-decision Viterbi decoding is proposed for four-level holographic data storage systems. While the previous four-ary modulation codes focus on preventing maximum two-dimensional intersymbol interference patterns, the proposed four-ary modulation code aims at maximizing the coding gains for better bit error rate performances. For achieving significant coding gains from the four-ary modulation codes, we design a new 2/3 four-ary modulation code in order to enlarge the free distance on the trellis through extensive simulation. The free distance of the proposed four-ary modulation code is extended from 1.21 to 2.04 compared with that of the conventional four-ary modulation code. The simulation result shows that the proposed four-ary modulation code has more than 1 dB gains compared with the conventional four-ary modulation code.

Aries

Science.gov (United States)

Murdin, P.

2000-11-01

(the Ram; abbrev. Ari, gen. Arietis; area 441 sq. deg.) A northern zodiacal constellation that lies between Taurus and Pisces, and culminates at midnight in late October. It represents the ram in Greek mythology whose golden fleece was the quest of Jason and the Argonauts. Its brightest stars were cataloged by Ptolemy (c. AD 100-175) in the Almagest. In Ptolemy's day the Sun was in Aries at the v...

The ARIES-III D-3He tokamak reactor

International Nuclear Information System (INIS)

Bathke, C.G.; Werley, K.A.; Miller, R.L.; Krakowski, R.A.; Santarius, J.F.

1992-01-01

The multi-institutional ARIES study has generated a conceptual design of another tokamak fusion reactor in a series that varies the assumed advances in technology and physics. The ARIES-III design uses a D- 3 He fuel cycle and requires advances in technology and physics for economical attractiveness. The optimal design was characterized through systems analyses for eventual conceptual engineering design. In this paper, results from the systems analysis are summarized, and a comparison with the high-field, D-T fueled ARIES-I is included

The ARIES tokamak reactor study

International Nuclear Information System (INIS)

1989-10-01

The ARIES study is a community effort to develop several visions of tokamaks as fusion power reactors. The aims are to determine the potential economics, safety, and environmental features of a range of possible tokamak reactors, and to identify physics and technology areas with the highest leverage for achieving the best tokamak reactor. Three ARIES visions are planned, each having a different degree of extrapolation from the present data base in physics and technology. The ARIES-I design assumes a minimum extrapolation from current tokamak physics (e.g., 1st stability) and incorporates technological advances that can be available in the next 20 to 30 years. ARIES-II is a DT-burning tokamak which would operate at a higher beta in the 2nd MHD stability regime. It employs both potential advances in the physics and expected advances in technology and engineering. ARIES-II will examine the potential of the tokamak and the D 3 He fuel cycle. This report is a collection of 14 papers on the results of the ARIES study which were presented at the IEEE 13th Symposium on Fusion Engineering (October 2-6, 1989, Knoxville, TN). This collection describes the ARIES research effort, with emphasis on the ARIES-I design, summarizing the major results, the key technical issues, and the central conclusions

Application of SADT and ARIS methodologies for modeling and management of business processes of information systems

Directory of Open Access Journals (Sweden)

O. V. Fedorova

2018-01-01

Full Text Available The article is devoted to application of SADT and ARIS methodologies for modeling and management of business processes of information systems. The relevance of this article is beyond doubt, because the design of the architecture of information systems, based on a thorough system analysis of the subject area, is of paramount importance for the development of information systems in general. The authors conducted a serious work on the analysis of the application of SADT and ARIS methodologies for modeling and managing business processes of information systems. The analysis was carried out both in terms of modeling business processes (notation and applying the CASE-tool, and in terms of business process management. The first point of view reflects the interaction of the business analyst and the programmer in the development of the information system. The second point of view is the interaction of the business analyst and the customer. The basis of many modern methodologies for modeling business processes is the SADT methodology. Using the methodology of the IDEF family, it is possible to efficiently display and analyze the activity models of a wide range of complex information systems in various aspects. CASE-tool ARIS is a complex of tools for analysis and modeling of the organization's activities. The methodical basis of ARIS is a set of different modeling methods that reflect different views on the system under study. The authors' conclusions are fully justified. The results of the work can be useful for specialists in the field of modeling business processes of information systems. In addition, the article has an oriented character when working on the constituent elements of curricula for students specializing in information specialties and management, provides an update of the content and structure of disciplines on modeling the architecture of information systems and organization management, using models.

ARI3SG: Aerosol retention in the secondary side of a steam generator. Part II: Model validation and uncertainty analysis

International Nuclear Information System (INIS)

Lopez, Claudia; Herranz, Luis E.

2012-01-01

Highlights: ► Validation of a model (ARI3SG) for the aerosol retention in the break stage of a steam generator under SGTR conditions. ► Interpretation of the experimental SGTR and CAAT data by using the ARI3SG model. ► Assessment of the epistemic and stochastic uncertainties effect on the ARI3SG results. - Abstract: A large body of data has been gathered in the last decade through the EU-SGTR, ARTIST and ARTIST 2 projects for aerosol retention in the steam generator during SGTR severe accident sequences. At the same time the attempt to extend the analytical capability has resulted in models that need to be validated. The ARI3SG is one of such developments and it has been built to estimate the aerosol retention in the break stage of a “dry” steam generator. This paper assesses the ARI3SG predictability by comparing its estimates to open data and by analyzing the effect of associated uncertainties. Datamodel comparison has been shown to be satisfactory and highlight the potential use of an ARI3SG-like formulation in system codes.

ARIES tokamak reactor study

International Nuclear Information System (INIS)

Steiner, D.; Embrechts, M.

1990-07-01

This is a status report on technical progress relative to the tasks identified for the fifth year of Grant No. FG02-85-ER52118. The ARIES tokamak reactor study is a multi-institutional effort to develop several visions of the tokamak as an attractive fusion reactor with enhanced economic, safety, and environmental features. The ARIES study is being coordinated by UCLA and involves a number of institutions, including RPI. The RPI group has been pursuing the following areas of research in the context of the ARIES-I design effort: MHD equilibrium and stability analyses; plasma-edge modeling and blanket materials issues. Progress in these areas is summarized herein

The ARIES-I tokamak reactor study

International Nuclear Information System (INIS)

1991-01-01

This report discusses the following topics on the Aries-I Tokamak: Design description; systems studies and economics; reactor plasma physics; magnet engineering; fusion-power-ore engineering; and environmental and safety features

ARIS: Acid Rain Information System. Final project report

Energy Technology Data Exchange (ETDEWEB)

McWilliams, P.; Musante, L.

1982-04-20

ARIS is to provide the technical, government, and business communities with abstracted information from the world's significant technical and business literature. The subject areas covered by this acid rain data base includes (1) the mechanism of the formation of acid rain; (2) its transport phenomena; (3) its effects on materials; (4) its effects on plants; (5) the health effects of acid rain; and (6) monitoring and analysis of acid rain. Data in ARIS comes from several government and commercial data base producers, and these include EDB DOE Energy Database, Environmental Science Index, Air Pollution Abstracts, National Technical Service (NTIS), and articles of regional interests from various newspapers. The types of publication source documents are: technical journals, conference proceedings, selected monographs, government reports, special studies, and newspapers. The file data is proposed to be updated quarterly and will cover selected references from 1970 with major focus on material after 1976.

ARIES-AT safety design and analysis

Energy Technology Data Exchange (ETDEWEB)

Petti, D.A. [Idaho National Engineering and Environmental Laboratory, Fusion Safety Program, P.O. Box 1625, Idaho Falls, ID 83415 (United States)]. E-mail: David.Petti@inl.gov; Merrill, B.J. [Idaho National Engineering and Environmental Laboratory, Fusion Safety Program, P.O. Box 1625, Idaho Falls, ID 83415 (United States); Moore, R.L. [Idaho National Engineering and Environmental Laboratory, Fusion Safety Program, P.O. Box 1625, Idaho Falls, ID 83415 (United States); Longhurst, G.R. [Idaho National Engineering and Environmental Laboratory, Fusion Safety Program, P.O. Box 1625, Idaho Falls, ID 83415 (United States); El-Guebaly, L. [Fusion Technology Institute, 1500 Engineering Drive, University of Wisconsin-Madison, Madison, WI 53706 (United States); Mogahed, E. [Fusion Technology Institute, 1500 Engineering Drive, University of Wisconsin-Madison, Madison, WI 53706 (United States); Henderson, D. [Fusion Technology Institute, 1500 Engineering Drive, University of Wisconsin-Madison, Madison, WI 53706 (United States); Wilson, P. [Fusion Technology Institute, 1500 Engineering Drive, University of Wisconsin-Madison, Madison, WI 53706 (United States); Abdou, A. [Fusion Technology Institute, 1500 Engineering Drive, University of Wisconsin-Madison, Madison, WI 53706 (United States)

2006-01-15

ARIES-AT is a 1000 MWe conceptual fusion power plant design with a very low projected cost of electricity. The design contains many innovative features to improve both the physics and engineering performance of the system. From the safety and environmental perspective, there is greater depth to the overall analysis than in past ARIES studies. For ARIES-AT, the overall spectrum of off-normal events to be examined has been broadened. They include conventional loss of coolant and loss of flow events, an ex-vessel loss of coolant, and in-vessel off-normal events that mobilize in-vessel inventories (e.g., tritium and tokamak dust) and bypass primary confinement such as a loss of vacuum and an in-vessel loss of coolant with bypass. This broader examination of accidents improves the robustness of the design from the safety perspective and gives additional confidence that the facility can meet the no-evacuation requirement under average weather conditions. We also provide a systematic assessment of the design to address key safety functions such as confinement, decay heat removal, and chemical energy control. In the area of waste management, both the volume of the component and its hazard are used to classify the waste. In comparison to previous ARIES designs, the overall waste volume is less because of the compact design.

Fusion power core engineering for the ARIES-ST power plant

International Nuclear Information System (INIS)

Tillack, M.S.; Wang, X.R.; Pulsifer, J.; Malang, S.; Sze, D.K.; Billone, M.; Sviatoslavsky, I.

2003-01-01

ARIES-ST is a 1000 MWe fusion power plant based on a low aspect ratio 'spherical torus' (ST) plasma. The ARIES-ST power core was designed to accommodate the unique features of an ST power plant, to meet the top-level requirements of an attractive fusion energy source, and to minimize extrapolation from the fusion technology database under development throughout the world. The result is an advanced helium-cooled ferritic steel blanket with flowing PbLi breeder and tungsten plasma-interactive components. Design improvements, such as the use of SiC inserts in the blanket to extend the outlet coolant temperature range were explored and the results are reported here. In the final design point, the power and particle loads found in ARIES-ST are relatively similar to other advanced tokamak power plants (e.g. ARIES-RS [Fusion Eng. Des. 38 (1997) 3; Fusion Eng. Des. 38 (1997) 87]) such that exotic technologies were not required in order to satisfy all of the design criteria. Najmabadi and the ARIES Team [Fusion Eng. Des. (this issue)] provide an overview of ARIES-ST design. In this article, the details of the power core design are presented together with analysis of the thermal-hydraulic, thermomechanical and materials behavior of in-vessel components. Detailed engineering analysis of ARIES-ST TF and PF systems, nuclear analysis, and safety are given in the companion papers

Overview of the ARIES-RS reversed-shear tokamak power plant study

International Nuclear Information System (INIS)

Najmabadi, F.; Billone, M.C.

1997-01-01

The ARIES-RS tokamak is a conceptual, D-T-burning 1000 MWe power plant. As with earlier ARIES design studies, the final design of ARIES-RS was obtained in a self-consistent manner using the best available physics and engineering models. Detailed analyses of individual systems together with system interfaces and interactions were incorporated into the ARIES systems code in order to assure self-consistency and to optimize towards the lowest cost system. The ARIES-RS design operates with a reversed-shear plasma and employs a moderate aspect ratio (A=4.0). The plasma current is relatively low (I p =11.32 MA) and bootstrap current fraction is high (f BC =0.88). Consequently, the auxiliary power required for RF current drive is relatively low (∝80 MW). At the same time, the average toroidal beta is high (β=5%), providing power densities near practical engineering limits (the peak neutron wall loading is 5.7 MW m -2 ). The toroidal-field (TF) coil system is designed with relatively 'conventional' materials (Nb 3 Sn and NbTi conductor with 316SS structures), and is operated at a design limit of ∝16 T at the coil in order to optimize the design point. The ARIES-RS design uses a self-cooled lithium blanket with vanadium alloy as the structural material. The V-alloy has low activation, low afterheat, high temperature capability and can handle high heat flux. A self-cooled liquid lithium blanket is simple, and with the development of an insulating coating, has low operating pressure. Also, this blanket gives excellent neutronics performance. Detailed analysis has been performed to minimize the cost and maximize the performance of the blanket and shield. (orig.)

The ARIES-ST study: Assessment of the spherical tokamak concept as fusion power plants

International Nuclear Information System (INIS)

Najmabadi, F.; Tillack, M.; Miller, R.; Mau, T.K.; Jardin, S.; Stambaugh, R.; Steiner, D.; Waganer, L.

2001-01-01

Recent experimental achievements and theoretical studies have generated substantial interest in the spherical tokamak concept. The ARIES-ST study was undertaken as a national U.S. effort to investigate the potential of the spherical tokamak concept as a fusion power plant and as a vehicle for fusion development. The 1000-MWe ARIES-ST power plant has an aspect ratio of 1.6, a major radius of 3.2 m, a plasma elongation (at 95% flux surface) of 3.4 and triangularity of 0.64. This configuration attains a β of 54% (which is 90% of the maximum theoretical β). While the plasma current is 31 MA, the almost perfect alignment of bootstrap and equilibrium current density profiles results in a current-drive power of only 31 MW. The on-axis toroidal field is 2.1 T and the peak field at the TF coil is 7.6 T, which leads to 288 MW of Joule losses in the normal-conducting TF system. The ARIES-ST study has highlighted many areas where tradeoffs among physics and engineering systems are critical in determining the optimum regime of operation for spherical tokamaks. Many critical issues also have been identified which must be resolved in R and D programs. (author)

Superconducting poloidal field magnet engineering for the ARIES-ST

International Nuclear Information System (INIS)

Bromberg, Leslie; Pourrahimi, S.; Schultz, J.H.; Titus, P.; Jardin, S.; Kessel, C.; Reiersen, W.

2003-01-01

The critical issues of the poloidal systems for the ARIES-ST design have been presented in this paper. Because of the large plasma current and the need of highly shaped plasmas, the poloidal field (PF) coils should be located inside the toroidal field in order to reduce their current. Even then, the divertor coils carry large currents. The ARIES-ST PF coils are superconducting using the internally cooled cable-in-conduit conductor. The peak self field in the divertor coils is about 15 T and the highest field in the non-divertor coils is about 6 T. The PF magnets have built-in margins that are sufficient to survive disruptions without quenching. The costing study indicates that the specific cost of the PF system is $80/kg. Detailed design and trade-off studies of ARIES-ST are presented and remaining R and D issues are identified

UCLA program in reactor studies: The ARIES tokamak reactor study

International Nuclear Information System (INIS)

1991-01-01

The ARIES research program is a multi-institutional effort to develop several visions of tokamak reactors with enhanced economic, safety, and environmental features. The aims are to determine the potential economics, safety, and environmental features of a range of possible tokamak reactors, and to identify physics and technology areas with the highest leverage for achieving the best tokamak reactor. Four ARIES visions are currently planned for the ARIES program. The ARIES-1 design is a DT-burning reactor based on ''modest'' extrapolations from the present tokamak physics database and relies on either existing technology or technology for which trends are already in place, often in programs outside fusion. ARIES-2 and ARIES-4 are DT-burning reactors which will employ potential advances in physics. The ARIES-2 and ARIES-4 designs employ the same plasma core but have two distinct fusion power core designs; ARIES-2 utilize the lithium as the coolant and breeder and vanadium alloys as the structural material while ARIES-4 utilizes helium is the coolant, solid tritium breeders, and SiC composite as the structural material. Lastly, the ARIES-3 is a conceptual D- 3 He reactor. During the period Dec. 1, 1990 to Nov. 31, 1991, most of the ARIES activity has been directed toward completing the technical work for the ARIES-3 design and documenting the results and findings. We have also completed the documentation for the ARIES-1 design and presented the results in various meetings and conferences. During the last quarter, we have initiated the scoping phase for ARIES-2 and ARIES-4 designs

Neutronics assessment for the ARIES advanced reactor studies

International Nuclear Information System (INIS)

El-Guebaly, L.A.

1995-01-01

The ARIES tokamak designs have incorporated environmental and safety constraints in the design from the beginning. Low activation materials such as SiC or SiC composites, vanadium alloy, and modified HT-9 ferritic steel were utilized as the main structures in ARIES-IV, II, and III, respectively. All designs employ D-T fuel cycles except ARIES-III which is D- 3 He fuelled. An overall tritium breeding ratio of 1.12 seems adequate for ARIES-II and IV. The Li 2 O breeder requires a beryllium multiplier to achieve T self-sufficiency in the ARIES-IV design while the lithium has the ability to breed sufficient T in ARIES-II without a multiplier. Radiation damage concerns for the structures are the burn-up of the SiC and SiC composites and the atomic displacement in the vanadium. The first wall and blanket require frequent replacement (every 3-4 years) during reactor operation. The end-of-life fluences are 16.5MW yearsm -2 and 13MW yearsm -2 based on the 200dpa and 3% burn-up limits for the V and SiC structures respectively. Because of the lower neutron production, the ARIES-III first wall and shield are permanent components and require no replacement over the plant lifetime. A variety of shield options was examined and the ability of various materials to protect the magnets was assessed. At least 1.2m and 1.4m of inboard blanket-shield are required for magnet protection in ARIES-II and ARIES-IV respectively. The lack of T breeding and the lower wall loading result in a much thinner shield (0.65m) for ARIES-III. (orig.)

Comparative histology of the femur between mouflon (Ovis aries musimon and sheep (Ovis aries aries

Directory of Open Access Journals (Sweden)

Stefano Giua

2014-12-01

Full Text Available Mouflon (Ovis aries musimon and sheep (Ovis aries aries are considered as the wild and domestic subspecies of the same species. A comparative study on the microstructure of mouflon and sheep femoral bone diaphysis is here reported. Bone microstructure is described for the first time in the mouflon. More than 200 secondary osteons from both subspecies were analyzed and qualitative evaluation was followed by quantitative determination of perimeter, area, minimum and maximum diameters of secondary osteons and Haversian canals. The basic structural patterns observed in both subspecies can be classified as plexiform and irregular Haversian tissue, in accordance with what reported in the literature for most ruminants. The presence of many secondary osteons in the mouflon means that the bone also consists of dense Haversian bone tissue. Statistical analysis demonstrated that mouflon secondary osteons are larger than in the sheep and made of a greater number of lamellae. Since mouflon and sheep are taxonomically closely related and their body size is very similar, the qualitative and quantitative differences here reported could be primarily explained on account of their different lifestyle. Indeed, the habits of wildlife typical of mouflons may lead to the presence of wide areas of dense Haversian tissue in that subspecies, as mechanical stresses are known to be related to number and size of secondary osteons. Finally, this analysis could provide a useful tool to recognize bones from different species, in forensic exam and archaeozoological studies as well.

The ARIES-III D-3He tokamak reactor: Design-point determination and parametric studies

International Nuclear Information System (INIS)

Bathke, C.G.; Werley, K.A.; Miller, R.L.; Krakowski, R.A.; Santarius, J.F.

1991-01-01

The multi-institutional ARIES study has generated a conceptual design of another tokamak fusion reactor in a series that varies the assumed advances in technology and physics. The ARIES-3 design uses a D- 3 He fuel cycle and requires advances in technology and physics for economical attractiveness. The optimal design was characterized through systems analyses for eventual conceptual engineering design. Results from the systems analysis are summarized, and a comparison with the high-field, D-T fueled ARIES-1 is included. 11 refs., 5 figs

ARIES-I Fusion-Power-Core Engineering

International Nuclear Information System (INIS)

Sharafat, S.; Najmabadi, F.; Wong, C.P.C.

1991-01-01

The ARIES research program is a multi-institutional project, the goal of which is to determine the economic, safety, and environmental potential of tokamak fusion reactors. The ARIES-I steady-state tokamak reactor is a conceptual, DT-burning, 1000 MWe reactor with a major radius of 6.75 m, a minor radius of 1.5 m, and an average neutron wall loading of 2.5 MW/m 2 . The ARIES-I plasma operates in the first MHD stability regime with a toroidal beta of 1.9%. The choice to operate in the first stability regime, with a high aspect ratio and with a low plasma current, leads to the need for high magnetic field to achieve adequate fusion power density (β 2 B 4 ). The toroidal field at the plasma center is 11 T and the maximum field at the coil is 21 T. Nonetheless, it is found that the maximum stress in the structural material of these magnets is ∝700 MPa and industrially available alloys can be used. The impurity-control and particle-exhaust system is based on a high recycling double-null divertor system. The low-activation silicon-carbide (SiC) composite is used as structural material. The breeder material, Li 2 ZrO 3 , and the multiplier material, Be, are both sphere-packed between poloidally nested SiC-composite shells. The divertor plates consist of SiC-composite tube shells protected with 2 mm-thick tungsten armor. The first wall, blanket, shield, and divertor are all helium cooled with an inlet coolant temperature of 350deg C at a pressure of 10 MPa. The high helium-outlet temperature of 650deg C ensures a relatively high gross thermal efficiency of 49%. The ARIES-I design has demonstrated that tokamak reactors have the potential to achieve a high level of safety coupled with a Class-C waste-disposal rating. (orig.)

Aris Angelis (1954-2003)

CERN Multimedia

2003-01-01

The value of a person is recognized more by what he leaves behind. Aris Angelis has left a plethora of people: teachers, friends, colleagues, associates, acquaintances, all of whom were shocked and devastated by his untimely and "unjust" departure. Some thought of him as their "mentor" during their crucial and difficult first steps in science... Some others as the ever-giving friend, who put the "common good" in front of himself... Others feel an "unpaid debt" to him, who left so soon and so unexpected... Some feel an enormous loss and a huge vacuum left behind where he was... Others had looked forward to working with him in his new scientific environment... But, ALL of us shall remember Aris with love and joy for what he was and what he has given and left to us. Apostolos D. Panagiotou (Teacher, colleague & friend) Aris was very sensitive to the need for science communication. A CERN guide since 1999, he took part in all special events, such as open days and the Oracle de Delphi, always with the same ...

Chaos M-ary modulation and demodulation method based on Hamilton oscillator and its application in communication.

Science.gov (United States)

Fu, Yongqing; Li, Xingyuan; Li, Yanan; Yang, Wei; Song, Hailiang

2013-03-01

Chaotic communication has aroused general interests in recent years, but its communication effect is not ideal with the restriction of chaos synchronization. In this paper a new chaos M-ary digital modulation and demodulation method is proposed. By using region controllable characteristics of spatiotemporal chaos Hamilton map in phase plane and chaos unique characteristic, which is sensitive to initial value, zone mapping method is proposed. It establishes the map relationship between M-ary digital information and the region of Hamilton map phase plane, thus the M-ary information chaos modulation is realized. In addition, zone partition demodulation method is proposed based on the structure characteristic of Hamilton modulated information, which separates M-ary information from phase trajectory of chaotic Hamilton map, and the theory analysis of zone partition demodulator's boundary range is given. Finally, the communication system based on the two methods is constructed on the personal computer. The simulation shows that in high speed transmission communications and with no chaos synchronization circumstance, the proposed chaotic M-ary modulation and demodulation method has outperformed some conventional M-ary modulation methods, such as quadrature phase shift keying and M-ary pulse amplitude modulation in bit error rate. Besides, it has performance improvement in bandwidth efficiency, transmission efficiency and anti-noise performance, and the system complexity is low and chaos signal is easy to generate.

Blanket concepts for the ARIES commercial tokamak reactor study

International Nuclear Information System (INIS)

Grotz, S.P.; Ghoniem, N.M.; Hasan, M.Z.; Martin, R.C.; Najmabadi, F.; Sharafat, S.; Hua, T.; Sze, D.K.; Cheng, E.T.; Creedon, R.L.; Wong, C.P.C.; Herring, J.S.; Klein, A.; Snead, L.; Steiner, D.

1989-01-01

The ARIES study is a 3-year effort, started in 1988, exploring the potential of the tokamak to be an attractive and competitive commercial power reactor. Several different versions of the tokamak are being considered, combining different levels of extrapolations in physics and engineering databases. The first version studied in detail, ARIES-I, combines present-day physics (with minimal extrapolation) with aggressive engineering technology such as very high-field, superconducting magnets and low-activation silicon carbide composite materials. The ARIES-I version is designed to meet acceptable safety and environmental criteria. In particular, achieving a passively safe concept that meets Class-C waste disposal is one of the high leverage items in the design. This paper summarizes the scoping analysis and engineering design of the ARIES-I fusion-power-core subsystems. The ARIES-I design is a 1000 MW e power reactor, operating at steady state in the 1 st stability regime and uses a high magnetic field. Typical operating parameters of the ARIES-I strawman design are listed

Safety in the ARIES Tokamak Design Study

International Nuclear Information System (INIS)

Herring, J.S.; Wong, C.P.-C.; Cheng, E.T.; Grotz, S.

1989-01-01

Safety is one of the primary goals of the ARIES Tokamak Design Study. Public safety goals are the achievement passive safety which is demonstrable in tests that could precede operation and the assurance that releases from accidents be passively limited such that no evacuation plan in necessary. Strategies for safety of the plant investment are factory fabrication, short construction times and a design such that no off-normal operational transient results in damage which could not be repaired in routine maintenance. ARIES-I, the first of three 'visions' of potential tokamak reactors, will use He at 5 MPa as a blanket coolant and SiC/composite ceramic for the first wall and blanket materials. Both the coolant and the structural material were chosen for their low activation, both in the short term after accidents and for long term waste management. The breeder, Li 4 SiO 4 , was also chosen for low activation. Contemporary plasma physics and aggressive technology are used in ARIES-I, which results in very high toroidal fields (24 T maximum at the coil). The stored TF energy will be about 130 GJ. A central concern is the safe discharge of this stored energy under electrical fault conditions and prevention of a failure in the magnet set from propagating into systems containing radioactive inventories. The TF coil system consists of 16 coils, each containing two separate windings powered by two independent power supplies. Arcs and shorts between the two power supply systems and across individual windings have been modeled. In addition, delay or failure in circuit breaker opening has been modeled. The safety impacts of LOCA, LOFA and disruptive events have also been evaluated. 8 refs., 4 figs., 7 tabs

ARIES pit disassembly-safeguards issues for transparency

International Nuclear Information System (INIS)

Fearey, B.L.; Cremers, T.L.

1995-01-01

Historic changes are now occurring in U.S. nonproliferation and arms control policy. The quantity of nuclear weapons required to provide a deterrence has decreased (especially with the end of the Cold War). Further, various bilateral and multilateral treaties now require the removal of numerous nuclear weapons from the U.S. stockpile. Although the removal of such weapons appears straightforward, the final disposition of the surplus weapons-grade nuclear material must be carefully considered. Domestically, several plutonium disposition plans are now under consideration concerning long-term safety, materials accounting, environmental impact, accessibility, and long-term containment. The Automated Retirement and Integrated Extraction System (ARIES) currently under development at Los Alamos National Laboratory is one such disposition method for the disassembly of plutonium weapons components (pits). The ARIES system integrates and automates several features: disassembly of pits, consolidation of the plutonium material, on-line measurement of final products, waste streams, and long-term packaging. Clearly, in any plutonium disposition plan, the safeguards aspects of materials control and accounting and the security aspects must be carefully considered and evaluated

The ARIES-I high-field-tokamak reactor: Design-point determination and parametric studies

International Nuclear Information System (INIS)

Miller, R.L.

1989-01-01

The multi-institutional ARIES study has examined the physics, technology, safety, and economic issues associated with the conceptual design of a tokamak magnetic-fusion reactor. The ARIES-I variant envisions a DT-fueled device based on advanced superconducting coil, blanket, and power-conversion technologies and a modest extrapolation of existing tokamak physics. A comprehensive systems and trade study has been conducted as an integral and ongoing part of the reactor assessment in order to identify an acceptable design point to be subjected to detailed analysis and integration as well as to characterize the ARIES-I operating space. Results of parametric studies leading to the identification of such a design point are presented. 15 refs., 6 figs., 2 tabs

ARIES-AT: An advanced tokamak, advanced technology fusion power plant

International Nuclear Information System (INIS)

Najmabadi, F.; Jardin, S.C.; Tillack, M.; Waganer, L.M.

2001-01-01

The ARIES-AT study was initiated to assess the potential of high-performance tokamak plasmas together with advanced technology in a fusion power plant. Several avenues were pursued in order to arrive at plasmas with a higher β and better bootstrap alignment compared to ARIES-RS that led to plasmas with higher β N and β. Advanced technologies that are examined in detail include: (1) Possible improvements to the overall system by using high-temperature superconductors, (2) Innovative SiC blankets that lead to a high thermal cycle efficiency of ∼60%; and (3) Advanced manufacturing techniques which aim at producing near-finished products directly from raw material, resulting in low-cost, and reliable components. The 1000-MWe ARIES-AT design has a major radius of 5.4 m, minor radius of 1.3 M, a toroidal β of 9.2% (β N =6.0) and an on-axis field of 5.6 T. The plasma current is 13 MA and the current drive power is 24 MW. The ARIES-AT study shows that the combination of advanced tokamak modes and advanced technology leads to attractive fusion power plant with excellent safety and environmental characteristics and with a cost of electricity (5c/kWh), which is competitive with those projected for other sources of energy. (author)

The ARIES-RS power core - recent development in Li/V designs

International Nuclear Information System (INIS)

Sze Dai-Kai; Billone, M.C.; Hua, T.Q.; Tillack, M.; Najmabadi, F.; Wang Xueren; Malang, S.; El-Guebaly, L.A.; Sviatoslavsky, I.N.; Blanchard, J.P.; Crowell, J.A.; Khater, H.Y.; Mogahed, E.A.; Waganer, L.M.; Lee, D.; Cole, D.

1998-01-01

The ARIES-RS fusion power plant design study is based on reversed-shear (RS) physics with a Li/V (lithium breeder and vanadium structure) blanket. The reversed-shear discharge has been documented in many large tokamak experiments. The plasma in the RS mode has a high beta, low current, and low current drive requirement. Therefore, it is an attractive physics regime for a fusion power plant. The blanket system based on Li/V has high temperature operating capability, good tritium breeding, excellent high heat flux removal capability, long structural life time, low activation, low after heat and good safety characteristics. For these reasons, the ARIES-RS reactor study selected Li/V as the reference blanket. The combination of attractive physics and attractive blanket engineering is expected to result in a superior power plant design. This paper summarizes the power core design of the ARIES-RS power plant study. (orig.)

Undergraduate Observations of Separation and Position Angle of Double Stars ARY 6 AD and ARY 6 AE at Manzanita Observatory

Science.gov (United States)

Hoffert, Michael J.; Weise, Eric; Clow, Jenna; Hirzel, Jacquelyn; Leeder, Brett; Molyneux, Scott; Scutti, Nicholas; Spartalis, Sarah; Tokuhara, Corey

2014-05-01

Six beginning astronomy students, part of an undergraduate stellar astronomy course, one advanced undergraduate student assistant, and a professor measured the position angles and separations of Washington Double Stars (WDS) 05460 + 2119 (also known as ARY 6 AD and ARY 6 AE). The measurements were made at the Manzanita Observatory (116° 20'42" W, 32° 44' 5" N) of the Tierra Astronomical Institute on 10 Blackwood Rd. in Boulevard, California (www.youtube.com/watch?v=BHVdcMGBGDU), at an elevation of 4,500 ft. A Celestron 11" HD Edge telescope was used to measure the position angles and separations of ARY 6 AD and ARY 6 AE. The averages of our measurements are as follows: separation AD: trial 1 124.1 arcseconds and trial 2 124.5 arcseconds. The average of separation for AE: trial 1 73.3 arcseconds and trial 2 73.8 arcseconds. The averages of position angle for AD: trial 1 159.9 degrees and trial 2 161.3 degrees. The averages of position angle for AE: trial 1 232.6 degrees and trial 2 233.7 degrees.

ARIES NDA Robot operators' manual

International Nuclear Information System (INIS)

Scheer, N.L.; Nelson, D.C.

1998-05-01

The ARIES NDA Robot is an automation device for servicing the material movements for a suite of Non-destructive assay (NDA) instruments. This suite of instruments includes a calorimeter, a gamma isotopic system, a segmented gamma scanner (SGS), and a neutron coincidence counter (NCC). Objects moved by the robot include sample cans, standard cans, and instrument plugs. The robot computer has an RS-232 connection with the NDA Host computer, which coordinates robot movements and instrument measurements. The instruments are expected to perform measurements under the direction of the Host without operator intervention. This user's manual describes system startup, using the main menu, manual operation, and error recovery

Use of system code to estimate equilibrium tritium inventory in fusion DT machines, such as ARIES-AT and components testing facilities

International Nuclear Information System (INIS)

Wong, C.P.C.; Merrill, B.

2014-01-01

Highlights: • With the use of a system code, tritium burn-up fraction (f burn ) can be determined. • Initial tritium inventory for steady state DT machines can be estimated. • f burn of ARIES-AT, CFETR and FNSF-AT are in the range of 1–2.8%. • Respective total tritium inventories of are 7.6 kg, 6.1 kg, and 5.2 kg. - Abstract: ITER is under construction and will begin operation in 2020. This is the first 500 MW fusion class DT device, and since it is not going to breed tritium, it will consume most of the limited supply of tritium resources in the world. Yet, in parallel, DT fusion nuclear component testing machines will be needed to provide technical data for the design of DEMO. It becomes necessary to estimate the tritium burn-up fraction and corresponding initial tritium inventory and the doubling time of these machines for the planning of future supply and utilization of tritium. With the use of a system code, tritium burn-up fraction and initial tritium inventory for steady state DT machines can be estimated. Estimated tritium burn-up fractions of FNSF-AT, CFETR-R and ARIES-AT are in the range of 1–2.8%. Corresponding total equilibrium tritium inventories of the plasma flow and tritium processing system, and with the DCLL blanket option are 7.6 kg, 6.1 kg, and 5.2 kg for ARIES-AT, CFETR-R and FNSF-AT, respectively

The ARIES-AT advanced tokamak, Advanced technology fusion power plant

International Nuclear Information System (INIS)

Najmabadi, Farrokh; Abdou, A.; Bromberg, L.

2006-01-01

The ARIES-AT study was initiated to assess the potential of high-performance tokamak plasmas together with advanced technology in a fusion power plant and to identifying physics and technology areas with the highest leverage for achieving attractive and competitive fusion power in order to guide fusion R and D. The 1000-MWe ARIES-AT design has a major radius of 5.2 m, a minor radius of 1.3 m, a toroidal β of 9.2% (β N = 5.4) and an on-axis field of 5.6 T. The plasma current is 13 MA and the current-drive power is 35 MW. The ARIES-AT design uses the same physics basis as ARIES-RS, a reversed-shear plasma. A distinct difference between ARIES-RS and ARIES-AT plasmas is the higher plasma elongation of ARIES-AT (κ x = 2.2) which is the result of a 'thinner' blanket leading to a large increase in plasma β to 9.2% (compared to 5% for ARIES-RS) with only a slightly higher β N . ARIES-AT blanket is a simple, low-pressure design consisting of SiC composite boxes with a SiC insert for flow distribution that does not carry any structural load. The breeding coolant (Pb-17Li) enters the fusion core from the bottom, and cools the first wall while traveling in the poloidal direction to the top of the blanket module. The coolant then returns through the blanket channel at a low speed and is superheated to ∼1100 deg. C. As most of the fusion power is deposited directly into the breeding coolant, this method leads to a high coolant outlet temperature while keeping the temperature of the SiC structure as well as interface between SiC structure and Pb-17Li to about 1000 deg. C. This blanket is well matched to an advanced Brayton power cycle, leading to an overall thermal efficiency of ∼59%. The very low afterheat in SiC composites results in exceptional safety and waste disposal characteristics. All of the fusion core components qualify for shallow land burial under U.S. regulations (furthermore, ∼90% of components qualify as Class-A waste, the lowest level). The ARIES

Current drive studies for the ARIES steady-state tokamak reactors

International Nuclear Information System (INIS)

Mau, T.K.; Ehst, D.A.; Mandrekas, J.

1994-01-01

Steady-state plasma operating scenarios are designed for three versions of the ARIES reactor, using non-inductive current drive techniques that have an established database. R.f. waves, including fast and lower hybrid waves, are the reference drivers for the D-T burning ARIES-I and ARIES-II/IV, while neutral beam injection is employed for ARIES-III which burns D- 3 He. Plasma equilibria with a high bootstrap-current component have been used, in order to minimize the recirculating power fraction and cost of electricity. To maintain plasma stability, the driven current profile has been aligned with that of equilibrium by proper choices of the plasma profiles and power launch parameters. Except for ARIES-III, the current-drive power requirements and the relevant technology developments are found to be quite reasonable. The wave-power spectrum and launch requirements are also considered achievable with a modest development effort. Issues such as an improved database for fast-wave current drive, lower-hybrid power coupling to the plasma edge, profile control in the plasma core, and access to the design point of operation remain to be addressed. ((orig.))

The role of health education in promoting acceptance of an ARI control project.

Science.gov (United States)

Dhar, G M

1993-01-01

In India, acute respiratory infection (ARI) is responsible for 20% of all annual deaths of children under 5 years old (600,000-800,000 deaths). Children have from 3 to 5 ARI episodes a year. Thus, it is important to inform communities about ARI prevention and control. Health education activities of ARI control projects should convey knowledge, improve attitudes, and encourage health-inducing practices in such a way that a community should voluntarily assume responsibility to actively prevent and control ARI in children. These activities should empower communities to identify and report ARI in children, provide home care and supportive therapy, use the UIP cover to protect all infants, promote breast feeding, reduce indoor air pollution, and cooperate with health workers in ARI control as well as use oral rehydration therapy as soon as diarrhea starts. To design an effective health education program, planners need to interview a sample of the local population to learn the people's knowledge, attitudes, and practices toward ARI in children. Any ARI health education program should also include UIP, oral rehydration therapy, maternal and child health, and family welfare. The health educator can use 1 or more educational methods. Discussion is a 2-way process of exchanging ideas and should raise questions about ARI control, provide answers, and yield solutions. If an educator chooses the demonstration method, he or she should take the target audience to a health facility so the staff can demonstrate the clinical signs of a child with ARI, including the fast breathing, chest indrawing, cyanosis, wheezing, and stridor. The display method involves audiovisual aids, such as posters, puppet shows, and films. The health educator can use any of these methods when dealing with individuals, groups, or crowds. He or she must attune the approach and materials to the values of the community and present them so the individual can readily adapt the messages into his or her way of

Use of system code to estimate equilibrium tritium inventory in fusion DT machines, such as ARIES-AT and components testing facilities

Energy Technology Data Exchange (ETDEWEB)

Wong, C.P.C., E-mail: wongc@fusion.gat.com [General Atomics, San Diego, CA (United States); Merrill, B. [Idaho National Laboratory, Idaho Falls, ID (United States)

2014-10-15

Highlights: • With the use of a system code, tritium burn-up fraction (f{sub burn}) can be determined. • Initial tritium inventory for steady state DT machines can be estimated. • f{sub burn} of ARIES-AT, CFETR and FNSF-AT are in the range of 1–2.8%. • Respective total tritium inventories of are 7.6 kg, 6.1 kg, and 5.2 kg. - Abstract: ITER is under construction and will begin operation in 2020. This is the first 500 MW{sub fusion} class DT device, and since it is not going to breed tritium, it will consume most of the limited supply of tritium resources in the world. Yet, in parallel, DT fusion nuclear component testing machines will be needed to provide technical data for the design of DEMO. It becomes necessary to estimate the tritium burn-up fraction and corresponding initial tritium inventory and the doubling time of these machines for the planning of future supply and utilization of tritium. With the use of a system code, tritium burn-up fraction and initial tritium inventory for steady state DT machines can be estimated. Estimated tritium burn-up fractions of FNSF-AT, CFETR-R and ARIES-AT are in the range of 1–2.8%. Corresponding total equilibrium tritium inventories of the plasma flow and tritium processing system, and with the DCLL blanket option are 7.6 kg, 6.1 kg, and 5.2 kg for ARIES-AT, CFETR-R and FNSF-AT, respectively.

Virtual Array Receiver Options for 64-ary Pulse Position Modulation (PPM)

Energy Technology Data Exchange (ETDEWEB)

Mendez, A J; Hernandez, V J; Gagliardi, R M; Bennett, C V

2009-01-12

NASA is developing technology for 64 64-ary PPM using relatively large PPM time slots (10 ns) an and relatively simple d electronic electronic-based receiver logic. In this paper we describe photonic photonics-based receiver options for the case of much higher data rates and inherently shorter decision times. The receivers take the form of virtual ( array or quadrant) arrays with associated comparison tests. Previously we explored this concept for 4-ary and 16-ary PPM at data rates of up to 10 Gb/s. The lessons learned are applied to the case of 64 64-ary PPM at 1.25 Gb/s s. Various receiver designs are compare, and t the optimum design, based on virtual array he arrays, is s, evaluated using numerical simulations.

Safety analyses of the ARIES tokamak reactor designs

International Nuclear Information System (INIS)

Herring, J.S.; McCarthy, K.A.; Dolan, T.J.

1994-01-01

The ARIES design has sought to maximize environmental and safety advantages of fusion through careful selection of materials and design. The ARIES-I tokamak reactor design consists of an SiC composite structure for the first wall and blanket, cooled by 10MPa helium. The breeder is Li 2 ZrO 3 . The divertor consists of SiC composite tubes coated with 2mm tungsten. Loss-of-cooling accident (LOCA) calculations indicate maximum temperatures will not cause damage if the plasma is promptly extinguished. The ARIES-II design includes liquid lithium and vanadium, both of which have low activation, multiple barriers between the lithium and air and an inert cover gas to prevent lithium-air reactions. The ARIES-II reactor is passively safe with a total 1km early dose of about 88rem (0.88Sv). ARIES-III was an extensive examination of the viability of a D- 3 He fueled tokamak power reactor. Because neutrons are produced only through side reactions (D+D→ 3 He+n, and D+D→T+p followed by D+T→ 4 He+n), the reactor has a reduced activation of the first wall and shield, low afterheat and class A or C low level waste disposal. Since no tritium is required for operation, no lithium-containing breeding blanket is necessary. We modeled a LOCA in which the organic coolant was burning in order to estimate the amount of radionuclides released from the first wall. Because the maximum temperature is low, below 600 C, release fractions are small. We analyzed the disposition of the 20g per day of tritium that is produced by D-D reactions and removed by vacuum pumps. The ARIES-IV coolant is helium and the breeder is lithium oxide. The structure is silicon carbide. Since the neutron multiplier, beryllium metal, is combustible, releasing about 60MJkg -1 , beryllium is the chief source of chemical energy. Less than 10% of the 24 Na inventory is likely to diffuse out of the SiC during a fire in which the beryllium is consumed. Therefore, the offsite dose would be less than 200rem. ((orig.))

Physico-chemical and biological studies on water from Aries River (Romania).

Science.gov (United States)

Butiuc-Keul, A; Momeu, L; Craciunas, C; Dobrota, C; Cuna, S; Balas, G

2012-03-01

Our work was focused on physico-chemical and biological characteristics of Aries River, one of the largest rivers from Romania. Water samples were collected from 11 sites along Aries River course. We have measured de (18)O and D isotopic composition of Aries River water in these locations and correlated these data with the isotopic composition of aquatic plants and with the pollution degree. Some ions from Aries River water were also analyzed: NO(3)(-), NO(2)(-), PO(4)(3-) Cu(2+), Fe(3+). Analysis of diatom communities has been performed in order to quantify the level of water pollution of Aries River. All physico-chemical analyses revealed that the most polluted site is Abrud; the source of pollution is most probably the mining enterprise from Rosia Montana. Water isotope content increases from upstream to downstream of the locations analyzed. The structure of diatom communities is strongly influenced by the different pollution sources from this area: mine waters, industrial waters, waste products, land cleaning, tourism etc. The water eutrophication increases from upstream of Campeni to downstream of Campia Turzii. Copyright © 2011 Elsevier Ltd. All rights reserved.

ARIES-III divertor engineering design

International Nuclear Information System (INIS)

Wong, C.P.C.; Schultz, K.R.; Cheng, E.T.; Grotz, S.; Hasan, M.A.; Najmabadi, F.; Sharafat, S.; Herring, J.S.; Valenti, M.; Steiner, D.

1992-01-01

This paper reports the engineering design of the ARIES-III double- null divertor. The divertor coolant tubes are made from W-3Re alloy and cooled by subcooled flow boiling of organic coolant. A coating of 4 mm thick tungsten is plasma sprayed onto the divertor surface. This W layer can withstand the thermal deposition of a few disruptions. At a maximum surface heat flux of 5.4 MW/m 2 , a conventional divertor design can be used. The divertor surface is contoured to have a constant heat flux of 5.4 MW/m 2 . The net erosion of the W-surface was found to be negligible at about 0.1 mm/year. After 3 years of operation, the W-3Re alloy ARIES-III divertor can be disposed of as Class A waste. In order to control the prompt dose release at site boundary to less than 200 Rem, isotopic tailoring of the W-alloy will be needed

ARIES-III divertor engineering design

Energy Technology Data Exchange (ETDEWEB)

Wong, C.P.C.; Schultz, K.R. [General Atomics, San Diego, CA (United States); Cheng, E.T. [TSI Research, Solana Beach, CA (United States); Grotz, S.; Hasan, M.A.; Najmabadi, F.; Sharafat, S. [California Univ., Los Angeles, CA (United States). Dept. of Mechanical, Aerospace and Nuclear Engineering; Brooks, J.N.; Ehst, D.A.; Sze, D.K. [Argonne National Lab., IL (United States); Herring, J.S. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Valenti, M.; Steiner, D. [Rensselaer Polytechnic Inst., Troy, NY (United States). Plasma Dynamics Lab.

1992-01-01

This paper reports the engineering design of the ARIES-III double- null divertor. The divertor coolant tubes are made from W-3Re alloy and cooled by subcooled flow boiling of organic coolant. A coating of 4 mm thick tungsten is plasma sprayed onto the divertor surface. This W layer can withstand the thermal deposition of a few disruptions. At a maximum surface heat flux of 5.4 MW/m{sup 2}, a conventional divertor design can be used. The divertor surface is contoured to have a constant heat flux of 5.4 MW/m{sup 2}. The net erosion of the W-surface was found to be negligible at about 0.1 mm/year. After 3 years of operation, the W-3Re alloy ARIES-III divertor can be disposed of as Class A waste. In order to control the prompt dose release at site boundary to less than 200 Rem, isotopic tailoring of the W-alloy will be needed.

Micropropagation of caçari under different nutritive culture media ...

African Journals Online (AJOL)

The caçari (Myrciaria dubia) is a native fruit tree from Amazon with high concentrations of vitamin C. This study aimed to adjust a culture medium that meets the nutritional needs for the in vitro development of caçari, evaluating the effect of different concentrations and nutritive culture media, antioxidant, and levels of agar and ...

Engineering design of the Aries-IV gaseous divertor

International Nuclear Information System (INIS)

Hasan, M.Z.; Najmabadi, F.; Sharafat, S.

1994-01-01

ARIES-IV is a conceptual, D-T burning, steady-state tokamak fusion reactor producing 1000 MWe net. It operates in the second plasma stability regime. The structural material is SiC composite and the primary coolant is helium at 10MPa base pressure. ARIES-IV uses double-null divertors for particle control. Total thermal power recovered from the divertors is 425MW, which is 16% of the total reactor thermal power. Among the desirable goals of divertor design were to avoid the use of tungsten and to use the same structural material and primary coolant as in the blanket design. In order to reduce peak heat flux, the innovative gaseous divertor has been used in ARIES-IV. A gaseous divertor reduces peak heat flux by increasing the surface area and by distributing particle and radiation energy more uniformly. Another benefit of gaseous divertor is the reduction of plasma temperature in the divertor chamber, so that material erosion due to sputtering, can be diminished. This makes the use of low-Z material possible in a gaseous divertor

Bracket bond strength and cariostatic potential of an experimental resin adhesive system containing Portland cement.

Science.gov (United States)

Iijima, Masahiro; Hashimoto, Masanori; Nakagaki, Susumu; Muguruma, Takeshi; Kohda, Naohisa; Endo, Kazuhiko; Mizoguchi, Itaru

2012-09-01

To determine if a new experimental resin-based material containing Portland cement (PC) can help prevent enamel caries while providing adequate shear bond strength (SBS). Brackets were bonded to human premolars with experimental resin-based adhesive pastes composed of three weight rations of resin and PC powder (PC 30, 7:3; PC 50, 5:5; PC 70, 3:7; n  =  7). Self-etching primer (SEP) adhesive (Transbond Plus) and resin-modified glass ionomer cement (RMGIC) adhesive (Fuji Ortho FC Automix) were used for comparison. All of the bonded teeth were subjected to alternating immersion in demineralizing (pH 4.55) and remineralizing (pH 6.8) solutions for 14 days. The SBS for each sample was examined, and the Adhesive Remnant Index (ARI) score was calculated. The hardness and elastic modulus of the enamel were determined by a nanoindenter at 20 equidistant depths from the external surface at 100 µm from the bracket edge. Data were compared by one-way analysis of variance and a chi-square test. PC 50 and PC 70 showed significantly greater SBS than Fuji Ortho FC Automix, although Transbond Plus showed significantly greater SBS than other bonding systems. No significant difference in the ARI category was observed among the five groups. For specimens bonded with PC 50 and PC 70, the hardness and elastic modulus values in most locations were equivalent to those of Fuji Ortho FC Automix. Experimental resin-based bonding material containing PC provides adequate SBS and a caries-preventive effect equivalent to that of the RMGIC adhesive system.

Health effects assessment of chemical exposures: ARIES methodology

Energy Technology Data Exchange (ETDEWEB)

Sierra, L; Montero, M.; Rabago, I.; Vidania, R.

1995-07-01

In this work, we present ARIES* update: a system designed in order to facilitate the human health effects assessment produced by accidental release of toxic chemicals. The first version of ARIES was developed in relation to 82/501/EEC Directive about mayor accidents in the chemical industry. So, the first aim was the support of the effects assessment derived for the chemicals included into this directive. From this establishment, it was considered acute exposures for high concentrations. In this report, we present the actual methodology for considering other type of exposures, such as environmental and occupational. Likewise other versions, the methodology comprises two approaches: quantitative and qualitative assessments. Quantitative assessment incorporates the mathematical algorithms useful to evaluate the effects produced by the most important routes of exposure: inhalation, ingestion, eye contact and skin absorption, in a short, medium and long term. It has been included models that realizes an accurate quantification of doses, effects,... and so on, such as simple approaches when the available information is not enough. Qualitative assessment, designed in order to complement or replace the previous one, is incorporated into an informatics system, developed in Clipper. It executes and displays outstanding and important toxicological information of about 100 chemicals. This information comes from ECDIN (Environmental Chemicals Data and Information Network) database through a collaboration with JRC-ISPRA working group. (Author) 24 refs.

Health effects assessment of chemical exposures: ARIES methodology

International Nuclear Information System (INIS)

Sierra, L; Montero, M.; Rabago, I.; Vidania, R.

1995-01-01

In this work, we present ARIES* update: a system designed in order to facilitate the human health effects assessment produced by accidental release of toxic chemicals. The first version of ARIES was developed in relation to 82/501/EEC Directive about mayor accidents in the chemical industry. So, the first aim was the support of the effects assessment derived for the chemicals included into this directive. From this establishment, it was considered acute exposures for high concentrations. In this report, we present the actual methodology for considering other type of exposures, such as environmental and occupational. Likewise other versions, the methodology comprises two approaches: quantitative and qualitative assessments. Quantitative assessment incorporates the mathematical algorithms useful to evaluate the effects produced by the most important routes of exposure: inhalation, ingestion, eye contact and skin absorption, in a short, medium and long term. It has been included models that realizes an accurate quantification of doses, effects,... and so on, such as simple approaches when the available information is not enough. Qualitative assessment, designed in order to complement or replace the previous one, is incorporated into an informatics system, developed in Clipper. It executes and displays outstanding and important toxicological information of about 100 chemicals. This information comes from ECDIN (Environmental Chemicals Data and Information Network) database through a collaboration with JRC-ISPRA working group. (Author) 24 refs

Undergraduate Observations of Separation and Position Angle of Double Stars WDS J05460+2119AB (ARY 6AD and ARY 6 AE) at Manzanita Observatory (Abstract)

Science.gov (United States)

HOffert, M. J.; Weise, E.; Clow, J.; Hirzel, J.; Leeder, B.; Molyneux, S.; Scutti, N.; Spartalis, S.; Takuhara, C.

2014-12-01

(Abstract only) Six beginning astronomy students, part of an undergraduate stellar astronomy course, one advanced undergraduate student assistant, and a professor measured the position angles and separations of Washington Double Stars (WDS) J05460+2119 (= WDS J05460+2119AB; also known as ARY 6 AD and ARY 6 AE). The measurements were made at the Manzanita Observatory (116º 20' 42" W, 32º 44' 5" N) of the Tierra Astronomical Institute on 10 Blackwood Road in Boulevard, California (www.youtube.com/watch?v=BHVdeMGBGDU), at an elevation of 4,500 ft. A Celestron 11-inch HD Edge telescope was used to measure the position angles and separations of ARY 6 AD and ARY 6 AE. The averages of our measurements are as follows: separation AD: trial 1 124.1 arcseconds and trial 2 124.5 arcseconds; separation AE: trial 1 73.3 arcseconds and trial 2 73.8 arcseconds. The averages of positon angle for AD: trial 1 159.9 degrees and trial 2 161.3 degrees, for AE: trial 1 232.6 degrees and trial 2 233.7 degrees.

Performance analysis of MIMO wireless optical communication system with Q-ary PPM over correlated log-normal fading channel

Science.gov (United States)

Wang, Huiqin; Wang, Xue; Lynette, Kibe; Cao, Minghua

2018-06-01

The performance of multiple-input multiple-output wireless optical communication systems that adopt Q-ary pulse position modulation over spatial correlated log-normal fading channel is analyzed in terms of its un-coded bit error rate and ergodic channel capacity. The analysis is based on the Wilkinson's method which approximates the distribution of a sum of correlated log-normal random variables to a log-normal random variable. The analytical and simulation results corroborate the increment of correlation coefficients among sub-channels lead to system performance degradation. Moreover, the receiver diversity has better performance in resistance of spatial correlation caused channel fading.

HpARI Protein Secreted by a Helminth Parasite Suppresses Interleukin-33.

Science.gov (United States)

Osbourn, Megan; Soares, Dinesh C; Vacca, Francesco; Cohen, E Suzanne; Scott, Ian C; Gregory, William F; Smyth, Danielle J; Toivakka, Matilda; Kemter, Andrea M; le Bihan, Thierry; Wear, Martin; Hoving, Dennis; Filbey, Kara J; Hewitson, James P; Henderson, Holly; Gonzàlez-Cìscar, Andrea; Errington, Claire; Vermeren, Sonja; Astier, Anne L; Wallace, William A; Schwarze, Jürgen; Ivens, Alasdair C; Maizels, Rick M; McSorley, Henry J

2017-10-17

Infection by helminth parasites is associated with amelioration of allergic reactivity, but mechanistic insights into this association are lacking. Products secreted by the mouse parasite Heligmosomoides polygyrus suppress type 2 (allergic) immune responses through interference in the interleukin-33 (IL-33) pathway. Here, we identified H. polygyrus Alarmin Release Inhibitor (HpARI), an IL-33-suppressive 26-kDa protein, containing three predicted complement control protein (CCP) modules. In vivo, recombinant HpARI abrogated IL-33, group 2 innate lymphoid cell (ILC2) and eosinophilic responses to Alternaria allergen administration, and diminished eosinophilic responses to Nippostrongylus brasiliensis, increasing parasite burden. HpARI bound directly to both mouse and human IL-33 (in the cytokine's activated state) and also to nuclear DNA via its N-terminal CCP module pair (CCP1/2), tethering active IL-33 within necrotic cells, preventing its release, and forestalling initiation of type 2 allergic responses. Thus, HpARI employs a novel molecular strategy to suppress type 2 immunity in both infection and allergy. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Configuration and engineering design of the ARIES-RS tokamak power plant

International Nuclear Information System (INIS)

Tillack, M.S.; Malang, S.; Waganer, L.; Wang, X.R.; Sze, D.K.; El-Guebaly, L.; Wong, C.P.C.; Crowell, J.A.; Mau, T.K.; Bromberg, L.

1997-01-01

ARIES-RS is a conceptual design study which has examined the potential of an advanced tokamak-based power plant to compete with future energy sources and play a significant role in the future energy market. The design is a 1000 MWe, DT-burning fusion power plant based on the reversed-shear tokamak mode of plasma operation, and using moderately advanced engineering concepts such as lithium-cooled vanadium-alloy plasma-facing components. A steady-state reversed shear tokamak currently appears to offer the best combination of good economic performance and physics credibility for a tokamak-based power plant. The ARIES-RS engineering design process emphasized the attainment of the top-level mission requirements developed in the early part of the study in a collaborative effort between the ARIES Team and representatives from U.S. electric utilities and industry. Major efforts were devoted to develop a credible configuration that allows rapid removal of full sectors followed by disassembly in the hot cells during plant operation. This was adopted as the only practical means to meet availability goals. Use of an electrically insulating coating for the self-cooled blanket and divertor provides a wide design window and simplified design. Optimization of the shield, which is one of the larger cost items, significantly reduced the power core cost by using ferritic steel where the power density and radiation levels are low. An additional saving is made by radial segmentation of the blanket, such that large segments can be reused. The overall tokamak configuration is described here, together with each of the major fusion power core components: the first-wall, blanket and shield; divertor; heating, current drive and fueling systems; and magnet systems. (orig.)

Engineering design of ARIES-III

International Nuclear Information System (INIS)

Sze, D.K.; Wong, C.; Cheng, E.

1993-07-01

An efficient organic cooled low activation ferritic steel first wall and shield has been designed for the D- 3 He power reactor ARIES-III. The design allows removal of the large surface heat load without exceeding temperature and stress design limits. The structure is expected to last for the whole reactor life. The major concerns regarding using the organic coolant in fusion reactors have been greatly alleviated

Organic coolant for ARIES-III

International Nuclear Information System (INIS)

Sze, D.K.; Sviatoslavsky, I.; Sawan, M.; Gierszewski, P.; Hollies, R.; Sharafat, S.; Herring, S.

1991-04-01

ARIES-III is a D-He 3 reactor design study. It is found that the organic coolant is well suited for the D-He 3 reactor. This paper discusses the unique features of the D-He 3 reactor, and the reason that the organic coolant is compatible with those features. The problems associated with the organic coolant are also discussed. 8 refs., 2 figs., 6 tabs

ARIES segmented gamma-ray scanner user manual

International Nuclear Information System (INIS)

Biddle, R.S.; Sheppard, G.A.; Schneider, C.M.

1998-01-01

The segmented gamma-ray scatter (SGS) designated as Win SGS at the Los Alamos Plutonium Facility has been installed and is intended for use in quantifying the radioisotope content of DOE-STD-3013-96 equivalent containers. The SGS features new software written in C and a new user interface that runs under Microsoft Windows trademark. The operation of the ARIES Segmented Gamma-ray Scanner is documented in this manual. It covers user instructions as well as hardware and software details. Additional information is found in the documentation for the commercially available components and modules that compose the SGS. The objective of the ARIES project is to demonstrate technology to dismantle plutonium pits from excess nuclear weapons, convert the plutonium to a metal ingot or an oxide powder, package the metal or oxide, and verify the contents of the package by nondestructive assay

Receiver Architecture for 12.5 Gb/s 16-ary Pulse Position Modulation (PPM) Signaling

Energy Technology Data Exchange (ETDEWEB)

Mendez, A J; Gagliardi, R M; Hernandez, V J; Bennett, C V

2008-07-11

PPM is a signaling scheme that enables the transmission of multiple bits per symbol [1]. It has found favor in the regime of free space optical communications ('FSO' or 'Lasercom'); however, PPM has yet to be widely applied to fiber optic-based communications. Its limitation in fiber results from the exceedingly high bandwidth requirements needed to electronically process a directly detected pulse, especially as the symbol rate increases and the pulse width correspondingly decreases. As a solution, we introduced the concept of a virtual quadrant receiver for receiving 1.25 Gb/s 4-ary PPM, where photonic processing reduced the number of required electronic components [2]. In this paper, we extend these photonic process techniques to a 16-ary, 12.5 Gb/s (10 Gb/s plus 8B/10B line coding) PPM communications system for fiber optic avionics, wherein much of the receiver processing is enabled by techniques based on planar lightwave circuits (PLCs). The architecture is applicable to higher input data rates and M-ary PPM. In the following, we present the PPM encoding and decoding architectures and numerically simulated results.

Time-dependent Taylor–Aris dispersion of an initial point concentration

DEFF Research Database (Denmark)

Vedel, Søren; Hovad, Emil; Bruus, Henrik

2014-01-01

-specific theoretical results, and furthermore predict new phenomena. In particular, for the transient phase before the well-described steady Taylor–Aris limit is reached, we find anomalous diffusion with a dependence of the temporal scaling exponent on the initial release point, generalizing this finding in specific...... cases. During this transient we furthermore identify maxima in the values of the dispersion coefficient which exceed the Taylor–Aris value by amounts that depend on channel geometry, initial point release position, velocity profile and Péclet number. We show that these effects are caused by a difference...

Advection and Taylor-Aris dispersion in rivulet flow

Science.gov (United States)

Al Mukahal, F. H. H.; Duffy, B. R.; Wilson, S. K.

2017-11-01

Motivated by the need for a better understanding of the transport of solutes in microfluidic flows with free surfaces, the advection and dispersion of a passive solute in steady unidirectional flow of a thin uniform rivulet on an inclined planar substrate driven by gravity and/or a uniform longitudinal surface shear stress are analysed. Firstly, we describe the short-time advection of both an initially semi-infinite and an initially finite slug of solute of uniform concentration. Secondly, we describe the long-time Taylor-Aris dispersion of an initially finite slug of solute. In particular, we obtain the general expression for the effective diffusivity for Taylor-Aris dispersion in such a rivulet, and discuss in detail its different interpretations in the special case of a rivulet on a vertical substrate.

Calibration of ARI QC ionisation chambers using the Australian secondary standards for activity

International Nuclear Information System (INIS)

Mo, L.; Van Der Gaast, H.A.; Alexiev, D.; Butcher, K.S.A.; Davies, J.

1999-01-01

The Secondary Standard Activity Laboratory (SSAL) in ANSTO routinely provides standardised radioactive sources, traceable activity measurements and custom source preparation services to customers. The most important activity carried out is the calibration of ionisation chambers located in the Quality Control (QC) section of Australian Radioisotopes (ARI). This ensures that their activity measurements are traceable to the Australian primary methods of standardisation. ARI QC ionisation chambers are calibrated for 99m Tc, 67 Ga, 131 I, 201 Tl and 153 Sm. The SSAL has a TPA ionisation chamber, which has been directly calibrated against a primary standard for a variety of radioactive nuclides. Calibration factors for this chamber were determined specifically for the actual volumes (5ml for 99m Tc, 131 I, 2ml for 67 Ga, 201 Tl and 3 ml for 153 Sm) and types of vial (Wheaton) which are routinely used at ARI. These calibration factors can be used to accurately measure the activity of samples prepared by ARI. The samples can subsequently be used to calibrate the QC ionisation chambers. QC ionisation chambers are re-calibrated biannually

Neutronics design aspects of reference ARIES-I fusion blanket

International Nuclear Information System (INIS)

Cheng, E.T.

1990-12-01

A SiC composite blanket concept was recently conceived for a deuterium-tritium burning, 1000 MW(e) tokamak fusion reactor design, ARIES-I. SiC composite structural material was chosen due to its very low activation features. High blanket nuclear performance and thermal efficiency, adequate tritium breeding, and a low level of activation are important design requirements for the ARIES-I reactor. The major approaches, other than using SiC as structural material, in meeting these design requirements, are to employ beryllium, the only low activation neutron multiplying material, and isotopically tailored Li 2 ZrO 3 , a tritium breeding material stable at high temperature, as blanket materials. 5 refs., 4 figs., 2 tabs

FIRE, A Test Bed for ARIES-RS/AT Advanced Physics and Plasma Technology

International Nuclear Information System (INIS)

Meade, Dale M.

2004-01-01

The overall vision for FIRE [Fusion Ignition Research Experiment] is to develop and test the fusion plasma physics and plasma technologies needed to realize capabilities of the ARIES-RS/AT power plant designs. The mission of FIRE is to attain, explore, understand and optimize a fusion dominated plasma which would be satisfied by producing D-T [deuterium-tritium] fusion plasmas with nominal fusion gains ∼10, self-driven currents of ∼80%, fusion power ∼150-300 MW, and pulse lengths up to 40 s. Achieving these goals will require the deployment of several key fusion technologies under conditions approaching those of ARIES-RS/AT. The FIRE plasma configuration with strong plasma shaping, a double null pumped divertor and all metal plasma-facing components is a 40% scale model of the ARIES-RS/AT plasma configuration. ''Steady-state'' advanced tokamak modes in FIRE with high beta, high bootstrap fraction, and 100% noninductive current drive are suitable for testing the physics of the ARIES-RS/A T operating modes. The development of techniques to handle power plant relevant exhaust power while maintaining low tritium inventory is a major objective for a burning plasma experiment. The FIRE high-confinement modes and AT-modes result in fusion power densities from 3-10 MWm -3 and neutron wall loading from 2-4 MWm -2 which are at the levels expected from the ARIES-RS/AT design studies

Radiologic analysis of hindfoot alignment: Comparison of Méary, long axial, and hindfoot alignment views.

Science.gov (United States)

Neri, T; Barthelemy, R; Tourné, Y

2017-12-01

Among radiographic views available for assessing hindfoot alignment, the antero-posterior weight-bearing view with metal cerclage of the hindfoot (Méary view) is the most widely used in France. Internationally, the long axial view (LAV) and hindfoot alignment view (HAV) are used also. The objective of this study was to compare the reliability of these three views. The Méary view with cerclage of the hindfoot is as reliable as the LAV and HAV for assessing hindfoot alignment. All three views were obtained in each of 22 prospectively included patients. Intra-observer and inter-observer reliabilities were assessed by having two observers collect the radiographic measurements then computing the intra-class correlation coefficients (ICCs). The intra-observer and inter-observer ICCs were 0.956 and 0.988 with the Méary view, 0.990 and 0.765 with the HAV, and 0.997 and 0.991 with the LAV, respectively. Correlations were far stronger between the LAV and HAV than between each of these and the Méary view. Compared to the LAV and HAV, the Méary view indicated a greater degree of hindfoot valgus. Intra-observer reliability was excellent with both the LAV and HAV, whereas inter-observer reliability was better with the LAV. Excellent reliability was also obtained with the Méary view. Combining the Méary view to obtain a radiographic image of the clinical deformity with the LAV to measure the angular deviation of the hindfoot axis may be useful when assessing hindfoot malalignment. A comparison of the three views in a larger population is needed before clinical recommendations can be made. II, prospective study. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

ARIES-IV Nested Shell Blanket Design

International Nuclear Information System (INIS)

Wong, C.P.C.; Redler, K.; Reis, E.E.; Will, R.; Cheng, E.; Hasan, C.M.; Sharafat, S.

1993-11-01

The ARIES-IV Nested Shell Blanket (NSB) Design is an alternate blanket concept of the ARIES-IV low activation helium-cooled reactor design. The reference design has the coolant routed in the poloidal direction and the inlet and outlet plena are located at the top and bottom of the torus. The NSB design has the high velocity coolant routed in the toroidal direction and the plena are located behind the blanket. This is of significance since the selected structural material is SiC-composite. The NSB is designed to have key high performance components with characteristic dimensions of no larger than 2 m. These components can be brazed to form the blanket module. For the diverter design, we eliminated the use of W as the divertor coating material by relying on the successful development of the gaseous divertor concept. The neutronics and thermal-hydraulic performance of both blanket concepts are similar. The selected blanket and divertor configurations can also meet all the projected structural, neutronics and thermal-hydraulics design limits and requirements. With the selected blanket and divertor materials, the design has a level of safety assurance rate of I (LSA-1), which indicates an inherently safe design

ARI-EL: een case-controle onderzoek naar Acute Respiratoire Infecties in de Eerste lijn. Tussenrapportage over okt. 2000 t/m sept. 2001

NARCIS (Netherlands)

van den Brandhof WE; Bartelds AIM; Peeters MF; Wilbrink B; Heijnen MLA; CIE; NIVEL; Streeklaboratorium voor de Volksgezondheid Tilburg; LIS

2002-01-01

Vanaf oktober 2000 is de Nederlandse influenza-surveillance tijdelijk uitgebreid tot een case-controle studie naar acute respiratoire infecties (ARI) bij huisartspatienten: de ARI-EL studie. Doel is inzicht verkrijgen in de incidentie en etiologie van ARI, risicofactoren voor ARI en in de zorgvraag

Unique features in the ARIES glovebox line

International Nuclear Information System (INIS)

Martinez, H.E.; Brown, W.G.; Flamm, B.; James, C.A.; Laskie, R.; Nelson, T.O.; Wedman, D.E.

1998-01-01

A series of unique features have been incorporated into the Advanced Recovery and Integrated Extraction System (ARIES) at the Los Alamos National Laboratory, TA-55 Plutonium Facility. The features enhance the material handling in the process of the dismantlement of nuclear weapon primaries in the glovebox line. Incorporated into these features are the various plutonium process module's different ventilation zone requirements that the material handling systems must meet. These features include a conveyor system that consists of a remotely controlled cart that transverses the length of the conveyor glovebox, can be operated from a remote location and can deliver process components to the entrance of any selected module glovebox. Within the modules there exists linear motion material handling systems with lifting hoist, which are controlled via an Allen Bradley control panel or local control panels. To remove the packaged products from the hot process line, the package is processed through an air lock/electrolytic decontamination process that removes the radioactive contamination from the outside of the package container and allows the package to be removed from the process line

The Aries Program with emphasis on the International Magnetospherics Studies /IMS/-Porcupine Project

Science.gov (United States)

Honecker, H. J.

1976-01-01

This paper will discuss the present state of the development of the Aries Sounding Rocket System with particular emphasis on the configuration and subsystems required to support the IMS Program. A brief history of the development program will be presented. The results of the first five flights, three successes and two failures, will be presented and the observed performance compared to theoretical performance.

ARIES Oxide Production Program Annual Report - FY14

Energy Technology Data Exchange (ETDEWEB)

Kelley, Evelyn A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dinehart, Steven Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-02-01

A summary of the major accomplishments (September), milestones, financial summary, project performance and issues facing the ARIES Oxide Production Program at the close of FY14 is presented in this Executive Summary. Annual accomplishments are summarized in the body of the report.

Non-dirt house floor and the stimulant of environmental health decreased the risk Acute Respiratory Infection (ARI

Directory of Open Access Journals (Sweden)

Putu Suriyasa

2006-03-01

Full Text Available The risk factors related to acute respiratory infection (ARI, among others, is house floor. The aim of this research was to identify the influence of the Family Health and Nutrition program (FHN and other risk factors related to ARI. Data was obtained from a survey conducted in 5 provinces in Indonesia, which received the project of Family Health and Nutrition (FHN in 2003. The number of subjects was 1,500 families, selected by stratified random sampling method. The questionnaire completion and the observation were done on the spot in the subject’s house by special trained interviewers. The use of non-dirt house floor built prior to the project of FHN decreased the risk of ARI cases of 51% than the use of dirt house floor [Odds Ratio (OR = 0.49; 95% Confidence Interval (CI = 0.25-0.96]. The risk of ARI decreased of 52% among those who received than those which never received the stimulant of environmental health Family Health and Nutrition program (OR = 0.48; 95% CI =0.33-0.70. To decrease the risks of ARI cases, the program of environmental health is necessarily continued. (Med J Indones 2006; 15:60-5Keywords: ARI, non-dirt house floor, and stimulant of environmental health

Being Irrationally Funny as a Cognitive Psychologist: Interview With Dan Ariely.

Science.gov (United States)

Ariely, Dan; Popescu, Beatrice

2015-11-01

The idea of interviewing Dan Ariely was somehow latent on my mind since I started being interested in cognitive psychology and cognitive behavior psychotherapy, but actually got more ardent ever since irrationality became a research topic for his team at Duke University. I picked him as an interviewee thinking not only at his exceptional skills as a researcher and as Kahnemann 'disciple', but mainly for his fantastic wit, true modesty and utmost interest in making people's lives easier and more comfortable, by creating awareness on a lot of topics otherwise neglected. Dan Ariely's very agreeable personality and humor would not let you think of him as a burnt casualty who, in his youth struggled to survive a personal drama, so well-documented in his paper "Painful lessons" posted on the MIT website (http://web.mit.edu/ariely/www/MIT/Papers/mypain.pdf). I think reading his paper and also this transcribed interview with him would be also comforting for people who found out about Bucharest fire incident that rocked our society and also for people who are personally related to this tragedy.

Risk factors of Acute Respiratory Infection (ARI in under-fives in a rural hospital of Central India

Directory of Open Access Journals (Sweden)

Amar M. Taksande

2015-11-01

Full Text Available Introduction: Acute Respiratory Infection (ARI is a major cause of morbidity and mortality in developing countries in children especially in under-fives. Every year in the world, about 13 million under-5 children dies, 95% from developing countries; one third of total deaths are due to ARI. The aim of this study was to identify the significant risk factors for ARI in children less than five years of age living in rural areas of Central India.Methods: A hospital based case control study was undertaken to determine risk factors associated with respiratory tract infections in children. Children less than 5 years admitted in a pediatric ward with diagnosis of ARI were enrolled in the study as cases (n = 300 while the same number of controls (n = 300 were selected from neighborhood and were matched for age, sex and religion. Details of risk factors in cases and controls were recorded in pre-designed proforma. Results: A significant association was found between ARI and lack of breastfeeding, nutritional status, immunization status, delayed weaning, prelactal feeding, living in overcrowded conditions, mothers’ literacy status, low birth weight and prematurity. Among the environmental variables, inadequate ventilation, improper housing condition, exposure to indoor air pollution in form of combustion from fuel used for cooking were found as significant risk factors for ARI in under-fives.Conclusions: ARIs are affected by socio-demographic and socio-cultural risk factors, which can be modified with simple interventions. The various risk factors identified in this study were lack of breastfeeding, undernutrition, delayed weaning, overcrowding and prelactal feeding.

Observations of TT Ari requested in support of MOST observations

Science.gov (United States)

Waagen, Elizabeth O.

2012-08-01

Dr. Nikolaus Vogt (Universidad de Valparaiso, Chile) requested simultaneous photometry and spectroscopy of the novalike (VY Scl subtype) cataclysmic variable TT Ari in support of upcoming observations with the Canadian Microvariability and Oscillations of Stars (MOST) satellite 2012 September 13 through October 20. The Departamento de Fisica y Astronomia of the Valparaiso University will carry out photometry with small telescopes in central Chile but the assistance of other observers, particularly in other latitudes and longitudes, is requested. The observations are being carried out to study superhump behavior, which is still not well understood despite the amount of research done in all classes of cataclysmic variables. TT Ari exibits superhumps - both positive (the superhump period is longer than the orbital period) and negative (the superhump period is shorter than the orbital period). While positive superhumps are thought probably to be the result of an eccentric configuration in the accretion disk, the mechanism for negative superhumps is not yet understood except that it may be related to the disk's being warped out of the orbital plane, leading to complex torque phenomena. TT Ari, one of the brightest cataclysmic variables, exhibits occasional fadings of several magnitudes, from its usual high-state (maximum) magnitude of ~10.5V to a low-state magnitude as faint as 16V. These fadings occur every 20-25 years, and last between 500 and 1000 days. According to observations in the AAVSO International Database, TT Ari is currently magnitude 10.5V. Finder charts with sequence may be created using the AAVSO Variable Star Plotter (http://www.aavso.org/vsp). Observations should be submitted to the AAVSO International Database. See full Alert Notice for more details, particularly regarding goals of the campaign, and observing instructions.

Transient Taylor-Aris dispersion for time-dependent flows in straight channels

DEFF Research Database (Denmark)

Vedel, Søren; Bruus, Henrik

2012-01-01

Taylor–Aris dispersion, the shear-induced enhancement of solute diffusion in the flow direction of the solvent, has been studied intensely in the past half century for the case of steady flow and single-frequency pulsating flows. Here, combining Aris’s method of moments with Dirac’s bra–ket forma......Taylor–Aris dispersion, the shear-induced enhancement of solute diffusion in the flow direction of the solvent, has been studied intensely in the past half century for the case of steady flow and single-frequency pulsating flows. Here, combining Aris’s method of moments with Dirac’s bra...

Research Facilities for Solar Astronomy at ARIES P. Pant

Indian Academy of Sciences (India)

Aryabhatta Research Institute of Observational Sciences (ARIES), Manora Peak,. Nainital 263 129 .... station-20 computer, a GPS clock for accurate timing, etc. The various CCD ... circulation unit is used for cooling the camera head up to −25.

Fuzzy control of optical PPM CDMA with M-ary orthogonal signaling

Science.gov (United States)

Cui, K.; Leeson, M. S.; Hines, E. L.

2008-06-01

This paper introduces an incorporated spectral-amplitude coding (SAC) optical code-division multiple-access (OCDMA) scheme. One novel class of optical signature codes based on combinatorial designs is employed with M-ary pulse-position modulation (PPM) signaling to improve the system performance beyond the interference limit. A union upper bound on the bit error rate (BER) is derived and the performance characteristics are then discussed with a variety of system parameters. Furthermore, fuzzy logic (FL) control is proposed to provide tolerance of different degrees of reliability in multirate transmission and to achieve distinct service differentiation for multimedia applications. It is shown that the proposed system can effectively suppress noise effects and offer improved adaptation capabilities for multi-quality network requirements in comparison with systems without optimization.

On δ-derivations of n-ary algebras

International Nuclear Information System (INIS)

Kaygorodov, Ivan B

2012-01-01

We give a description of δ-derivations of (n+1)-dimensional n-ary Filippov algebras and, as a consequence, of simple finite-dimensional Filippov algebras over an algebraically closed field of characteristic zero. We also give new examples of non-trivial δ-derivations of Filippov algebras and show that there are no non-trivial δ-derivations of the simple ternary Mal'tsev algebra M 8 .

n-ary algebras: a review with applications

International Nuclear Information System (INIS)

De Azcarraga, J A; Izquierdo, J M

2010-01-01

This paper reviews the properties and applications of certain n-ary generalizations of Lie algebras in a self-contained and unified way. These generalizations are algebraic structures in which the two-entry Lie bracket has been replaced by a bracket with n entries. Each type of n-ary bracket satisfies a specific characteristic identity which plays the role of the Jacobi identity for Lie algebras. Particular attention will be paid to generalized Lie algebras, which are defined by even multibrackets obtained by antisymmetrizing the associative products of its n components and that satisfy the generalized Jacobi identity, and to Filippov (or n-Lie) algebras, which are defined by fully antisymmetric n-brackets that satisfy the Filippov identity. 3-Lie algebras have surfaced recently in multi-brane theory in the context of the Bagger-Lambert-Gustavsson model. As a result, Filippov algebras will be discussed at length, including the cohomology complexes that govern their central extensions and their deformations (it turns out that Whitehead's lemma extends to all semisimple n-Lie algebras). When the skewsymmetry of the Lie or n-Lie algebra bracket is relaxed, one is led to a more general type of n-algebras, the n-Leibniz algebras. These will be discussed as well, since they underlie the cohomological properties of n-Lie algebras. The standard Poisson structure may also be extended to the n-ary case. We shall review here the even generalized Poisson structures, whose generalized Jacobi identity reproduces the pattern of the generalized Lie algebras, and the Nambu-Poisson structures, which satisfy the Filippov identity and determine Filippov algebras. Finally, the recent work of Bagger-Lambert and Gustavsson on superconformal Chern-Simons theory will be briefly discussed. Emphasis will be made on the appearance of the 3-Lie algebra structure and on why the A 4 model may be formulated in terms of an ordinary Lie algebra, and on its Nambu bracket generalization. (topical

Normal forms for characteristic functions on n-ary relations

NARCIS (Netherlands)

D.J.N. van Eijck (Jan)

2004-01-01

textabstractFunctions of type (n) are characteristic functions on n-ary relations. Keenan established their importance for natural language semantics, by showing that natural language has many examples of irreducible type (n) functions, i.e., functions of type (n) that cannot be represented as

The Performance of a Mobile Phone Respiratory Rate Counter Compared to the WHO ARI Timer

Directory of Open Access Journals (Sweden)

Heng Gan

2015-01-01

Full Text Available OBJECTIVE: To compare the accuracy and efficiency of the respiratory rate (RR RRate mobile application to the WHO ARI Timer. METHODS: Volunteers used both devices to measure RR from reference videos of infants and children. Measurements were compared using correlation, Bland-Altman analysis, error metrics and time taken. RESULTS: Measurements with either device were highly correlated to the reference (r = 0.991 and r = 0.982, and to each other (r = 0.973. RRate had a larger bias than the ARI Timer (0.6 vs. 0.04 br/min, but tighter limits of agreement (−4.5 to 3.3 br/min vs. −5.5 to 5.5 br/min. RRate was more accurate than the ARI Timer (percentage error 10.6% vs. 14.8%, root mean square error 2.1 vs. 2.8 br/min and normalized root mean square error 5.6% vs. 7.5%. RRate measurements were 52.7 seconds (95% CI 50.4 s to 54.9 s faster. CONCLUSION: During video observations, RRate measured RR quicker with a similar accuracy compared to the ARI Timer.

Closed Form Aliasing Probability For Q-ary Symmetric Errors

Directory of Open Access Journals (Sweden)

Geetani Edirisooriya

1996-01-01

Full Text Available In Built-In Self-Test (BIST techniques, test data reduction can be achieved using Linear Feedback Shift Registers (LFSRs. A faulty circuit may escape detection due to loss of information inherent to data compaction schemes. This is referred to as aliasing. The probability of aliasing in Multiple-Input Shift-Registers (MISRs has been studied under various bit error models. By modeling the signature analyzer as a Markov process we show that the closed form expression derived for aliasing probability previously, for MISRs with primitive polynomials under q-ary symmetric error model holds for all MISRs irrespective of their feedback polynomials and for group cellular automata signature analyzers as well. If the erroneous behaviour of a circuit can be modelled with q-ary symmetric errors, then the test circuit complexity and propagation delay associated with the signature analyzer can be minimized by using a set of m single bit LFSRs without increasing the probability of aliasing.

ARIES-ST STUDIES REPORT FOR THE PERIOD JANUARY 1, 1998 THROUGH DECEMBER 31, 1998

International Nuclear Information System (INIS)

V.S. CHAN; L.L. LAO; Y.R. LIN-LIU; R.L. MILLER; T.W. PETRIE; P.A. POLITZER; R. PRATER; M.J. SCHAFFER; G.M. STAEBLER; R.D. STAMBAUGH; A.D. TURNBULL; W.P.WEST

1999-01-01

During 1998, the General Atomics (GA) ARIES-Spherical Torus (ST) team examined several critical issues related to the physics performance of the ARIES-ST design, and a number of suggestions were made concerning possible improvements in performance. These included specification of a reference plasma equilibrium, optimization about the reference equilibrium to achieve higher beta limits, examination of three possible schemes for plasma initiation, development of a detailed scenario for ramp-up of the plasma current and pressure to its full, final operating values, an assessment of the requirement for electron confinement, and several suggestions for divertor heat flux reduction. The reference equilibrium was generated using the TOQ code, with the specification of a 100%, self-consistent bootstrap current. The equilibrium has β = 51%, 10% below the stability limit (a margin specified by the ARIES-ST study). In addition, a series of intermediate equilibria were defined, corresponding to the ramp-up scenario discussed. A study of the influence of shaping on ARIES-ST performance indicates that significant improvement in both kink and ballooning stability can be obtained by modest changes in the squareness of the plasma. In test equilibria the ballooning beta limit is increased from 58% to 67%. Also the maximum allowable plasma-wall separation for kink stability can be increased by 30%. Three schemes were examined for noninductive plasma initiation. These are helicity injection (HICD), electron cyclotron heating (ECH)-assisted startup, and inductive startup using only the external equilibrium coils. HICD startup experiments have been done on the HIT and CDX devices. ECH-assisted startup has been demonstrated on CDX-U and DIII-D. External coil initiation is based on calculations for a proposed DIII-D experiment. In all cases, plasma initiation and preparation of an approximately 0.3 MA plasma for ARIES-ST appears entirely feasible

Evaluating methamphetamine use and risks of injection initiation among street youth: the ARYS study

Directory of Open Access Journals (Sweden)

Montaner Julio SG

2006-05-01

Full Text Available Abstract Many Canadian cities are experiencing ongoing infectious disease and overdose epidemics among injection drug users (IDU. These health concerns have recently been exacerbated by the increasing availability and use of methamphetamine. The challenges of reducing health-related harms among IDU have led to an increased recognition that strategies to prevent initiation into injection drug use must receive renewed focus. In an effort to better explore the factors that may protect against or facilitate entry into injection drug use, the At Risk Youth Study (ARYS has recently been initiated in Vancouver, Canada. The local setting is unique due to the significant infrastructure that has been put in place to reduce HIV transmission among active IDU. The ARYS study will seek to examine the impact of these programs, if any, on non-injection drug users. In addition, Vancouver has been the site of widespread use of methamphetamine in general and has seen a substantial increase in the use of crystal methamphetamine among street youth. Hence, the ARYS cohort is well positioned to examine the harms associated with methamphetamine use, including its potential role in facilitating initiation into injection drug use. This paper provides some background on the epidemiology of illicit drug use among street youth in North America and outlines the methodology of ARYS, a prospective cohort study of street youth in Vancouver, Canada.

Reactor Configuration Development for ARIES-CS

International Nuclear Information System (INIS)

Ku LP

2005-01-01

New compact, quasi-axially symmetric stellarator configurations have been developed as part of the ARIES-CS reactor studies. These new configurations have good plasma confinement and transport properties, including low losses of α particles and good integrity of flux surfaces at high β. We summarize the recent progress by showcasing two attractive classes of configurations--configurations with judiciously chosen rotational transforms to avoid undesirable effects of low order resonances on the flux surface integrity and configurations with very small aspect ratios (∼2.5) that have excellent quasi-axisymmetry and low field ripples

Exploration of Compact Stellarators as Power Plants: Initial Results from ARIES-CS Study

International Nuclear Information System (INIS)

Najmabadi, Farrokh

2005-01-01

A detailed and integrated study of compact stellarators as power plants, ARIES-CS, was initiated recently to advance our understanding of attractive compact stellarator configurations and to define key R and D areas. We have completed phase 1 of ARIES-CS study - our results are described in this paper. We have identified several promising stellarator configurations. High α particle loss of these configurations is a critical issue. It appears that devices with an overall size similar to those envisioned for tokamak power plants are possible. A novel approach was developed in ARIES-CS in which the blanket at the critical areas of minimum stand-off is replaced by a highly efficient WC-based shield. In this manner, we have been able to reduce the minimum stand-off by ∼20%-30% compared to a uniform radial build which was assumed in previous studies. Our examination of engineering options indicates that overall assembly and maintenance procedure plays a critical role in identifying acceptable engineering design and has a major impact on the optimization of a plasma/coil configuration

Analysis of different sub-carrier allocation of M-ary QAM-OFDM downlink in RoF system

Science.gov (United States)

Shao, Yu-feng; Chen, Luo; Wang, An-rong; Zhao, Yun-jie; Long, Ying; Ji, Xing-ping

2018-01-01

In this paper, the performance of a 60 GHz radio over fiber (RoF) system with 4/16/64 quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM) downstream signals is studied. Delivery of 10 Gbit/s M-ary QAM (MQAM) OFDM signals through the 20-km-long single-mode fiber (SMF) is complicated in terms of intensity modulation and direct detection (IM/DD). Using self-homodyne method, the beating of two independent light waves generating the millimeter-wave at the photodetector can be down-converted to baseband in the electrical domain. Meanwhile, three kinds of sub-carrier arrangement schemes are compared and discussed, and the simulation results show that lower peak-to-average power ratio ( PAPR) can be obtained adopting the adjacent scheme. At bit error rate ( BER) of 10-3, the receiver sensitivity using 4QAM-OFDM sub-carrier signal is almost enhanced by 4 dB and 9 dB compared with those of 16QAM-OFDM signal and 64QAM-OFDM signal.

ARIES: Enabling Visual Exploration and Organization of Art Image Collections.

Science.gov (United States)

Crissaff, Lhaylla; Wood Ruby, Louisa; Deutch, Samantha; DuBois, R Luke; Fekete, Jean-Daniel; Freire, Juliana; Silva, Claudio

2018-01-01

Art historians have traditionally used physical light boxes to prepare exhibits or curate collections. On a light box, they can place slides or printed images, move the images around at will, group them as desired, and visual-ly compare them. The transition to digital images has rendered this workflow obsolete. Now, art historians lack well-designed, unified interactive software tools that effectively support the operations they perform with physi-cal light boxes. To address this problem, we designed ARIES (ARt Image Exploration Space), an interactive image manipulation system that enables the exploration and organization of fine digital art. The system allows images to be compared in multiple ways, offering dynamic overlays analogous to a physical light box, and sup-porting advanced image comparisons and feature-matching functions, available through computational image processing. We demonstrate the effectiveness of our system to support art historians tasks through real use cases.

ARIES-RS safety design and analysis

International Nuclear Information System (INIS)

Steiner, D.; El-Guebaly, L.; Herring, S.; Khater, H.; Mogahed, E.; Thayer, R.; Tillack, M.S.

1997-01-01

The ARIES-RS safety design and analysis focused on achieving two objectives: (1) The avoidance of sheltering or evacuation in the event of an accident; and (2) the generation of only low-level waste, no greater than Class C. The ARIES-RS baseline design employs V-4Cr-4Ti as the blanket structural material and a low activation ferritic steel in the reflector and shield. In the event of a LOCA, the baseline design first wall maximum temperature falls in the range of 1100-1200 C. For this temperature range, the hazard assessment indicates that the dose at the site boundary will be less than 1 rem per year. Thus, no sheltering or evacuation would be required in the event of a LOCA. Although the baseline design satisfies the first safety objective noted above, a first wall maximum temperature of ∝1100-1200 C would likely compromise the integrity of the vanadium blanket structure and would require blanket replacement following such a temperature excursion. To avoid this situation, a modified blanket design incorporating supplemental heat removal is also proposed. Preliminary analysis of this modified design suggests that the first wall maximum temperature can be kept below the temperature range of concern, ∝1000-1100 C, in the event of a LOCA. When the ferritic steel used in the reflector and shield is one reduced in Ir and Ag impurities, all in-vessel components qualify for near-surface shallow land burial as Class C low-level waste. (orig.)

Summary of the PULSAR and ARIES studies

International Nuclear Information System (INIS)

Najmabadi, F.; Conn, R.W.

1994-01-01

The PULSAR research program is a multi-institutional effort to investigate the feasibility and potential features of fusion power plants based on pulsed, inductively driven tokamak operation. In order to provide a sensible assessment of pulsed tokamak operation, a comparison with the ARIES steady-state power plant designs has been made. Two PULSAR designs have been considered: PULSAR-I uses He coolant, a solid tritium-breeding material, and SiC composite structure; PULSAR-II uses liquid Li as the coolant and tritium breeder, and a V-alloy structure material. This paper focuses on the PULSAR design and the comparison with steady-state ARIES designs. The 1000-MWe PULSAR design has an aspect ratio of 4, a plasma major radius of 8.6m, a plasma minor radius of 2.2m, and a neutron wall loading of l.3MW/m 2 . The toroidal field on axis is 7T, plasma β is 2.8%, plasma current is 14MA, and the bootstrap fraction is 37%. Because of cyclic fatigue, the allowable stress in the TF coils is lower, and, therefore, for the same magnet technology, the maximum toroidal field on the coil is 12T in the PULSAR design (corresponding to 16T in a steady-state device). This decrease in the toroidal-field strength more than offsets the gains in plasma β values for a pulsed device, resulting in a lower fusion-power density and a larger tokamak relative to a steady-state design

On The (honest) truth about dishonesty: How we lie to everyone: Especially ourselves by Dan Ariely

OpenAIRE

Hajdu, Csongor

2016-01-01

In this book Dan Ariely follows the topic he started to discuss in his prior book, the Predictably Irrational: stating that there is logic and consistency behind irrational human thinking and actions. Ariely goes into more details and leads the general topic of irrationality through a narrow-down approach to the topic of cheating, one of the fields we could observe to work irrationally in some cases, and even within that to cheating within organizational environment.

Effect of nanotechnology in self-etch bonding systems on the shear bond strength of stainless steel orthodontic brackets

Directory of Open Access Journals (Sweden)

Shaza M. Hammad

Full Text Available ABSTRACT Objective: To evaluate the effect of silica dioxide (SiO2 nanofillers in different bonding systems on shear bond strength (SBS and mode of failure of orthodontic brackets at two experimental times. Methods: Ninety-six intact premolars were divided into four groups: A Conventional acid-etch and primer Transbond XT; B Transbond Plus self-etch primer; and two self-etch bonding systems reinforced with silica dioxide nanofiller at different concentrations: C Futurabond DC at 1%; D Optibond All-in-One at 7%. Each group was allocated into two subgroups (n = 12 according to experimental time (12 and 24 hours. SBS test was performed using a universal testing machine. ARI scores were determined under a stereomicroscope. Scanning electron microscopy (SEM and transmission electron microscopy (TEM were used to determine the size and distribution of nanofillers. One-way ANOVA was used to compare SBS followed by the post-hoc Tukey test. The chi-square test was used to evaluate ARI scores. Results: Mean SBS of Futurabond DC and Optibond All-in-One were significantly lower than conventional system, and there were no significant differences between means SBS obtained with all self-etch bonding systems used in the study. Lower ARI scores were found for Futurabond DC and Optibond All-in-One. There was no significant difference of SBS and ARI obtained at either time points for all bonding systems. Relative homogeneous distribution of the fillers was observed with the bonding systems. Conclusion: Two nanofilled systems revealed the lowest bond strengths, but still clinically acceptable and less adhesive was left on enamel. It is advisable not to load the brackets immediately to the maximum.

Effect of nanotechnology in self-etch bonding systems on the shear bond strength of stainless steel orthodontic brackets

Science.gov (United States)

Hammad, Shaza M.; El-Wassefy, Noha; Maher, Ahmed; Fawakerji, Shafik M.

2017-01-01

ABSTRACT Objective: To evaluate the effect of silica dioxide (SiO2) nanofillers in different bonding systems on shear bond strength (SBS) and mode of failure of orthodontic brackets at two experimental times. Methods: Ninety-six intact premolars were divided into four groups: A) Conventional acid-etch and primer Transbond XT; B) Transbond Plus self-etch primer; and two self-etch bonding systems reinforced with silica dioxide nanofiller at different concentrations: C) Futurabond DC at 1%; D) Optibond All-in-One at 7%. Each group was allocated into two subgroups (n = 12) according to experimental time (12 and 24 hours). SBS test was performed using a universal testing machine. ARI scores were determined under a stereomicroscope. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to determine the size and distribution of nanofillers. One-way ANOVA was used to compare SBS followed by the post-hoc Tukey test. The chi-square test was used to evaluate ARI scores. Results: Mean SBS of Futurabond DC and Optibond All-in-One were significantly lower than conventional system, and there were no significant differences between means SBS obtained with all self-etch bonding systems used in the study. Lower ARI scores were found for Futurabond DC and Optibond All-in-One. There was no significant difference of SBS and ARI obtained at either time points for all bonding systems. Relative homogeneous distribution of the fillers was observed with the bonding systems. Conclusion: Two nanofilled systems revealed the lowest bond strengths, but still clinically acceptable and less adhesive was left on enamel. It is advisable not to load the brackets immediately to the maximum. PMID:28444018

ARIES API/industry communication network now spans the U.S

International Nuclear Information System (INIS)

Anon.

1996-01-01

The ATM Research and Industrial Enterprise Study (ARIES) is a joint development project of API member companies. It involves the cooperation of the vendor community, several DOE labs and NASA's Advanced Communications Technology Satellite (ACTS) Program to explore the ability of Asynchronous Transfer Mode (ATM) networking technology to revolutionize the process of energy exploration and production. One of the goals of this partnership is to implement real-time seismic exploration by providing high-data-rate communications from ships to data processing centers on land, all integrally coupled with interactive analysis by expert geoscientists. This paper reviews a demonstration project of this system transmitting seismic data from a ship in the Gulf of Mexico to the Houston offices of Amoco, Shell and the Institute of Biosciences and Technology in the Texas Medical Center

Tunne Kelam - kolleeg ja sõber / Christopher Beazley, Elmar Bork, Ari Vatanen ...[jt.

Index Scriptorium Estoniae

2009-01-01

Euroopa Parlamendi väliskomisjoni liikmed Christopher Beazley, Elmar Bork, Ari Vatanen, Leedu Vabariigi president Valdas Adamkus, Euroopa Parlamendi asepresident Alejo Vidal-Quadras ja Euroopa Parlamendi president Hans-Gert Pöttering Tunne Kelamist

Transmitter and Translating Receiver Design For 64-ary Pulse Position Modulation (PPM)

Energy Technology Data Exchange (ETDEWEB)

Mendez, A J; Hernandez, V J; Gagliardi, R M; Bennett, C V

2010-01-20

This paper explores the architecture and design of an optically-implemented 64-ary PPM transmitter and direct-translating receiver that effectively translates incoming electrically-generated bit streams into optical PPM symbols (and vice-versa) at > 1 Gb/s data rates. The PPM transmitter is a cascade of optical switches operating at the frame rate. A corresponding receiver design is more difficult to architect and implement, since increasing data rates lead to correspondingly shorter decision times (slot times and frame times). We describe a solution in the form of a time-to-space mapping arrayed receiver that performs a translating algorithm represented as a code map. The technique for generating the code map is described, and the implementation of the receiver as a planar lightwave circuit is given. The techniques for implementing the transmitter and receiver can be generalized for any case of M-ary PPM.

Enamel shear bond strength of two orthodontic self-etching bonding systems compared to Transbond™ XT.

Science.gov (United States)

Hellak, Andreas; Rusdea, Patrick; Schauseil, Michael; Stein, Steffen; Korbmacher-Steiner, Heike Maria

2016-11-01

The aim of this in vitro study was to compare the shear bond strength (SBS) and Adhesive Remnant Index (ARI) scores of two self-etching no-mix adhesives (Prompt L-Pop™ and Scotchbond™) for orthodontic appliances to the commonly used total etch system Transbond XT™ (in combination with phosphoric acid). In all, 60 human premolars were randomly divided into three groups of 20 specimens each. In group 1 (control), brackets were bonded with Transbond™ XT primer. Prompt L-Pop™ (group 2) and Scotchbond™ Universal (group 3) were used in the experimental groups. Lower premolar brackets were bonded by light curing the adhesive. After 24 h of storage, the shear bond strength (SBS) was measured using a Zwicki 1120 testing machine. The adhesive remnant index (ARI) was determined under 10× magnification. The Kruskal-Wallis test was used to statistically compare the SBS and the ARI scores. No significant differences in the SBS between any of the experimental groups were detected (group 1: 15.49 ± 3.28 MPa; group 2: 13.89 ± 4.95 MPa; group 3: 14.35 ± 3.56 MPa; p = 0.489), nor were there any significant differences in the ARI scores (p = 0.368). Using the two self-etching no-mix adhesives (Prompt L-Pop™ and Scotchbond™) for orthodontic appliances does not affect either the SBS or ARI scores in comparison with the commonly used total-etch system Transbond™ XT. In addition, Scotchbond™ Universal supports bonding on all types of surfaces (enamel, metal, composite, and porcelain) with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures.

Evidence for a Common Origin of Blacksmiths and Cultivators in the Ethiopian Ari within the Last 4500 Years: Lessons for Clustering-Based Inference.

Directory of Open Access Journals (Sweden)

Lucy van Dorp

2015-08-01

Full Text Available The Ari peoples of Ethiopia are comprised of different occupational groups that can be distinguished genetically, with Ari Cultivators and the socially marginalised Ari Blacksmiths recently shown to have a similar level of genetic differentiation between them (FST ≈ 0.023 - 0.04 as that observed among multiple ethnic groups sampled throughout Ethiopia. Anthropologists have proposed two competing theories to explain the origins of the Ari Blacksmiths as (i remnants of a population that inhabited Ethiopia prior to the arrival of agriculturists (e.g. Cultivators, or (ii relatively recently related to the Cultivators but presently marginalized in the community due to their trade. Two recent studies by different groups analysed genome-wide DNA from samples of Ari Blacksmiths and Cultivators and suggested that genetic patterns between the two groups were more consistent with model (i and subsequent assimilation of the indigenous peoples into the expanding agriculturalist community. We analysed the same samples using approaches designed to attenuate signals of genetic differentiation that are attributable to allelic drift within a population. By doing so, we provide evidence that the genetic differences between Ari Blacksmiths and Cultivators can be entirely explained by bottleneck effects consistent with hypothesis (ii. This finding serves as both a cautionary tale about interpreting results from unsupervised clustering algorithms, and suggests that social constructions are contributing directly to genetic differentiation over a relatively short time period among previously genetically similar groups.

Whale shark economics: a valuation of wildlife tourism in South Ari Atoll, Maldives

KAUST Repository

Cagua, Edgar F.; Collins, Neal; Hancock, James; Rees, Richard

2014-01-01

Whale sharks attract large numbers of tourists, divers and snorkelers each year to South Ari Atoll in the Republic of Maldives. Yet without information regarding the use and economic extent of the attraction, it is difficult to prioritize

Studies on Aries River (Apuseni Mountains pollution using factorial analyses (in Romanian

Directory of Open Access Journals (Sweden)

Forray Ferenc La̒za̒r

2001-04-01

Full Text Available In the present study we try to use factor analysis in the characterisation of river water chemistry between the municipalities of Cheia and Muncel along a 54-km stretch of the Aries River (NW Romania. The results show that 4 factors can explain 88% of the water chemistry. The first factor explains 39% of the total data variance, and represents the water-rock interactions. This high percent indicates the importance of water rock interactions in defining the chemistry of surface waters. The second factor explains 23% of the data variation and represents the influence of mining effluents. The influence of the mine tailings on water chemistry is represented by the third factor. The sum of the second and the third factor can explain 40% of the total data variance, which confirms that the Arieş River is highly polluted by the mining industry. The last factor, which explains 8% of data variation represents the influence of the agricultural and domestic effluents.

Liquid metal cooled divertor for ARIES

International Nuclear Information System (INIS)

Muraviev, E.

1995-01-01

A liquid metal, Ga-cooled divertor design was completed for the double null ARIES-II divertor design. The design analysis indicated a surface heat flux removal capability of up to 15 MW/m 2 , and its relative easy maintenance. Design issues of configuration, thermal hydraulics, thermal stresses, liquid metal loop and safety effects were evaluated. For coolant flow control, it was found that it is necessary to use some part of the blanket cooling ducts for the draining of liquid metal from the top divertor. In order to minimize the inventory of Ga, it was recommended that the liquid metal loop equipment should be located as close to the torus as possible. More detailed analysis of transient conditions especially under accident conditions was identified as an issue that will need to be addressed

New q-ary quantum MDS codes with distances bigger than q/2

Science.gov (United States)

He, Xianmang; Xu, Liqing; Chen, Hao

2016-07-01

The construction of quantum MDS codes has been studied by many authors. We refer to the table in page 1482 of (IEEE Trans Inf Theory 61(3):1474-1484, 2015) for known constructions. However, there have been constructed only a few q-ary quantum MDS [[n,n-2d+2,d

In live interaction, does familiarity promote attraction or contempt? Reply to Norton, Frost, and Ariely (2011).

Science.gov (United States)

Reis, Harry T; Maniaci, Michael R; Caprariello, Peter A; Eastwick, Paul W; Finkel, Eli J

2011-09-01

In this reply, we address and refute each of Norton, Frost, and Ariely's (see record 2011-18560-001) specific objections to the conclusion that, ceteris paribus, familiarity breeds liking in live interaction. In particular, we reiterate the importance of studying live interaction rather than decontextualized processes. These rebuttals notwithstanding, we concur with Norton et al.'s call for an integrative model that encompasses both Norton, Frost, and Ariely's (see record 2006-23056-008) results and ours (see record 2011-04644-001), and we point readers toward a description of a possible model presented in our original article. PsycINFO Database Record (c) 2011 APA, all rights reserved.

Conference on Earth Observation and Information Systems

CERN Document Server

Morley, Lawrence

1977-01-01

The NATO Science Committee and its subsidiary Programme Panels provide support for Advanced Research Institutes (ARI) in various fields. The idea is to bring together scientists of a chosen field with the hope that they will achieve a consensus on research direc­ tions for the future, and make recommendations for the benefit of a wider scientific community. Attendance is therefore limited to those whose experience and expertise make the conclusions significant and acceptable to the wider community. Participants are selected on the basis of substantial track records in research or in the synthesis of research results to serve mankind. The proposal for a one-week ARIon Earth Observation and In­ formation Systems was initiated by the NATO Special Programme Panel on Systems Science (SPPOSS). In approving the ARI, the senior NATO Science Committee identified the subject as one of universal impor­ tance, requiring a broad perspective on the development of opera­ tional systems based on successful experimental s...

Does Measles Vaccination Reduce the Risk of Acute Respiratory Infection (ARI and Diarrhea in Children: A Multi-Country Study?

Directory of Open Access Journals (Sweden)

Rahul Bawankule

Full Text Available Pneumonia and diarrhea occur either as complications or secondary infections in measles affected children. So, the integrated Global Action Plan for Pneumonia and Diarrhea (GAPPD by WHO and UNICEF includes measles vaccination as preventive measure in children. The objective of the study is to examine the effect of measles vaccination on Acute Respiratory Infection (ARI and diarrhea in children in the Democratic Republic of Congo, Ethiopia, India, Nigeria, and Pakistan.We analyzed data from the most recent rounds of Demographic and Health Surveys (DHS in the selected countries. We included children age 12-59 months in the analysis. We used multivariable binary logistic regression to examine the effect of measles vaccination on ARI and diarrhea in children. We also estimated Vaccination Effectiveness (VE.More than 60 percent of the children age 12-59 months were given measles vaccine before the survey in the Democratic Republic of Congo, Ethiopia, India and Pakistan. Children who were given the measles vaccine were less likely to suffer from ARI than unvaccinated children in India and Pakistan. Children who were given the measles vaccine had a lower risk of diarrhea than those who did not receive it in all the selected countries except Ethiopia. Measles vaccination was associated with reduction in ARI cases by 15-30 percent in India and Pakistan, and diarrhea cases by 12-22 percent in the Democratic Republic of Congo, India, Nigeria and Pakistan.The receipt of the measles vaccine was associated with decrease in ARI and diarrhea in children. The immunization program must ensure that each child gets the recommended doses of measles vaccine at the appropriate age. The measles vaccination should be given more attention as a preventive intervention under the Global Action Plan for Pneumonia and Diarrhea (GAPPD in all low and middle-income countries.

Does Measles Vaccination Reduce the Risk of Acute Respiratory Infection (ARI) and Diarrhea in Children: A Multi-Country Study?

Science.gov (United States)

Bawankule, Rahul; Singh, Abhishek; Kumar, Kaushalendra; Shetye, Sadanand

2017-01-01

Pneumonia and diarrhea occur either as complications or secondary infections in measles affected children. So, the integrated Global Action Plan for Pneumonia and Diarrhea (GAPPD) by WHO and UNICEF includes measles vaccination as preventive measure in children. The objective of the study is to examine the effect of measles vaccination on Acute Respiratory Infection (ARI) and diarrhea in children in the Democratic Republic of Congo, Ethiopia, India, Nigeria, and Pakistan. We analyzed data from the most recent rounds of Demographic and Health Surveys (DHS) in the selected countries. We included children age 12-59 months in the analysis. We used multivariable binary logistic regression to examine the effect of measles vaccination on ARI and diarrhea in children. We also estimated Vaccination Effectiveness (VE). More than 60 percent of the children age 12-59 months were given measles vaccine before the survey in the Democratic Republic of Congo, Ethiopia, India and Pakistan. Children who were given the measles vaccine were less likely to suffer from ARI than unvaccinated children in India and Pakistan. Children who were given the measles vaccine had a lower risk of diarrhea than those who did not receive it in all the selected countries except Ethiopia. Measles vaccination was associated with reduction in ARI cases by 15-30 percent in India and Pakistan, and diarrhea cases by 12-22 percent in the Democratic Republic of Congo, India, Nigeria and Pakistan. The receipt of the measles vaccine was associated with decrease in ARI and diarrhea in children. The immunization program must ensure that each child gets the recommended doses of measles vaccine at the appropriate age. The measles vaccination should be given more attention as a preventive intervention under the Global Action Plan for Pneumonia and Diarrhea (GAPPD) in all low and middle-income countries.

Error Probability of Binary and -ary Signals with Spatial Diversity in Nakagami- (Hoyt Fading Channels

Directory of Open Access Journals (Sweden)

Duong Trung Q

2007-01-01

Full Text Available We analyze the exact average symbol error probability (SEP of binary and -ary signals with spatial diversity in Nakagami- (Hoyt fading channels. The maximal-ratio combining and orthogonal space-time block coding are considered as diversity techniques for single-input multiple-output and multiple-input multiple-output systems, respectively. We obtain the average SEP in terms of the Lauricella multivariate hypergeometric function . The analysis is verified by comparing with Monte Carlo simulations and we further show that our general SEP expressions particularize to the previously known results for Rayleigh ( = 1 and single-input single-output (SISO Nakagami- cases.

Updating ARI Educational Benefits Usage Data Bases for Army Regular, Reserve, and Guard: 2005 - 2006

National Research Council Canada - National Science Library

Young, Winnie

2007-01-01

This report describes the updating of ARI's educational benefits usage database with Montgomery GI Bill and Army College Fund data for Army Regular, Reserve, and Guard components over the 2005 and 2006 period...

A comparison of steady-state ARIES and pulsed PULSAR tokamak power plants

International Nuclear Information System (INIS)

Bathke, C.G.

1994-01-01

The multi-institutional ARIES study has completed a series of three steady-state and two pulsed cost-optimized conceptual designs of commercial tokamak fusion power plants that vary the level of assumed advances in technology and physics. The cost benefits of various design options are compared quantitatively. Possible means to improve the economic competitiveness of fusion are suggested

Vegetation map and plant checklist of Ol Ari Nyiro ranch and the ...

African Journals Online (AJOL)

Ol Ari Nyiro is a 360 km2 ranch of the Laikipia Plateau, in a semi-arid part of Kenya. The vegetation of the ranch and nearby Mukutan Gorge was mapped, and a preliminary check-list of fungi and vascular plants compiled. The vegetation was classified in 16 different types. A total of 708 species and subspecies were ...

ABSI (A Body Shape Index) and ARI (Anthropometric Risk Indicator) in Bariatric Surgery. First Application on a Bariatric Cohort and Possible Clinical Use.

Science.gov (United States)

Consalvo, Vincenzo; Krakauer, Jesse C; Krakauer, Nir Y; Canero, Antonio; Romano, Mafalda; Salsano, Vincenzo

2018-01-29

BMI (body mass index) is used to identify candidates for bariatric surgery, with a criterion of BMI ≥ 40. For lesser degrees of obesity, BMI 35-39.9, comorbidities are also considered. A Body Shape Index (ABSI) was derived to correct WC (waist circumference) for BMI and height. ABSI has been shown to be a linear predictor of long-term mortality across the range of BMI. Anthropometric risk indicator (ARI) combines the complementary contributions of BMI and ABSI and further improves mortality hazard prediction. We report for the first time ABSI and ARI for a bariatric surgical cohort at baseline and with 3-year follow-up. ABSI and BMI were calculated for 101 subjects from our bariatric surgery center database at baseline and after 3 years of follow-up. Raw values for BMI and ABSI were converted to Z scores and ARI values based on sex- and age-specific normals and risk associations from the National Health and Nutrition Examination Survey (NHANES) III sample of the US general population. Baseline scores for the anthropometric variables BMI and ABSI and the corresponding ARI were all higher than for the NHANES population sample. At 3-year post surgery, all three measures decreased significantly. While baseline BMI did not predict the change in mortality risk by ARI, baseline ABSI did (r = - 0.73), as did baseline ARI (r = - 0.94). Sleeve gastrectomy lowers ABSI and the associated mortality risk estimated from population studies after 3 years of follow-up. Considering our results, bariatric surgical candidates with BMI in the range of 35 to 39.9 with an increased ABSI-related mortality risk may have considerable survival benefit from bariatric surgery, even in the absence of qualifying comorbidities. 2814.

Survival of bighorn sheep (Ovis canadensis) commingled with domestic sheep (Ovis aries) in the absence of Mycoplasma ovipneumoniae.

Science.gov (United States)

Besser, Thomas E; Cassirer, E Frances; Yamada, Catherine; Potter, Kathleen A; Herndon, Caroline; Foreyt, William J; Knowles, Donald P; Srikumaran, Subramaniam

2012-01-01

To test the hypothesis that Mycoplasma ovipneumoniae is an important agent of the bighorn sheep (Ovis canadensis) pneumonia that has previously inevitably followed experimental commingling with domestic sheep (Ovis aries), we commingled M. ovipneumoniae-free domestic and bighorn sheep (n=4 each). One bighorn sheep died with acute pneumonia 90 days after commingling, but the other three remained healthy for >100 days. This unprecedented survival rate is significantly different (P=0.002) from that of previous bighorn-domestic sheep contact studies but similar to (P>0.05) bighorn sheep survival following commingling with other ungulates. The absence of epizootic respiratory disease in this experiment supports the hypothesized role of M. ovipneumoniae as a key pathogen of epizootic pneumonia in bighorn sheep commingled with domestic sheep.

Major integration issues in evolving the configuration design space for the Aries-Cs compact stellarator power plant

International Nuclear Information System (INIS)

Raffray, A.R.; Malang, S.; El-Guebaly, L.; Ihli, T.; Najmabadi, F.; Wang, X.

2006-01-01

The Aries-Cs study has been launched with the goal of developing through physics and engineering optimization an attractive power plant concept based on a compact stellarator configuration. The first phase of the study involved scoping out different physics configurations including two and three field period options. The engineering effort during that phase aimed at scoping out maintenance schemes and power core designs best suited to a compact stellarator configuration. This led to a down selection of the most attractive blanket configurations and maintenance schemes for more detailed studies during the second phase of the study. This paper summarizes early results from the second phase of the Aries-Cs study with a particular emphasis on the engineering effort

notebooks, looking for a very specific di- ary entry that he had made ...

African Journals Online (AJOL)

notebooks, looking for a very specific di- ary entry that he had made some years before. As he searches, the audience (or in this case, the reader) is shown glimpses from Fugard's actual diary entries since there is a significant overlap between dramatist and character. As Fugard (and. Fourie) confirms in the foreword to the.

Evaluation of disposal, recycling and clearance scenarios for managing ARIES radwaste after plant decommissioning

International Nuclear Information System (INIS)

El-Guebaly, L.

2007-01-01

The wealth of experience accumulated over the past 30-40 years of fusion power plant studies must be forged into a new strategy to reshape all aspects of handling the continual stream of radioactive materials during operation and after power plant decommissioning. With tighter environmental controls and the political difficulty of building new repositories worldwide, the disposal option could be replaced with more environmentally attractive scenarios, such as recycling and clearance. We applied the three scenarios to the most recent ARIES compact stellarator power plant. All ARIES-CS components qualify as Class A or C low-level waste, according to the US guidelines, and can potentially be recycled using conventional and advanced remote handling equipment. Approximately 80% of the total waste can be cleared for reuse within the nuclear industry or, preferably, released to the commercial market. This paper documents the recent developments in radwaste management of nuclear facilities and highlights the benefits and challenges of disposal, recycling and clearance

Whale shark economics: a valuation of wildlife tourism in South Ari Atoll, Maldives

KAUST Repository

Cagua, Edgar F.

2014-08-12

Whale sharks attract large numbers of tourists, divers and snorkelers each year to South Ari Atoll in the Republic of Maldives. Yet without information regarding the use and economic extent of the attraction, it is difficult to prioritize conservation or implement effective management plans. We used empirical recreational data and generalized mixed statistical models to conduct the first economic valuation (with direct spend as the primary proxy) of whale shark tourism in Maldives. We estimated that direct expenditures for whale shark focused tourism in the South Ari Marine Protected Area for 2012 and 2013 accounted for US$7.6 and $9.4 million respectively. These expenditures are based on an estimate of 72,000-78,000 tourists who are involved in whale shark excursions annually. That substantial amount of income to resort owners and operators, and tourism businesses in a relatively small area highlights the need to implement regulations and management that safeguard the sustainability of the industry through ensuring guest satisfaction and whale shark conservation. © 2014 Cagua et al.

Design of the Advanced Rare Isotope Separator ARIS at FRIB

Energy Technology Data Exchange (ETDEWEB)

Hausmann, M., E-mail: hausmann@frib.msu.edu [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States); Aaron, A.M. [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Amthor, A.M. [Dept. of Physics and Astronomy, Bucknell University, Lewisburg, PA 17837 (United States); Avilov, M.; Bandura, L.; Bennett, R.; Bollen, G.; Borden, T. [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States); Burgess, T.W. [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Chouhan, S.S. [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States); Graves, V.B. [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Mittig, W. [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States); National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824 (United States); Morrissey, D.J. [National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824 (United States); Pellemoine, F.; Portillo, M.; Ronningen, R.M.; Schein, M. [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States); Sherrill, B.M. [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States); National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, MI 48824 (United States); Zeller, A. [Facility for Rare Isotope Beams, Michigan State University, East Lansing, MI 48824 (United States)

2013-12-15

The Facility for Rare Isotopes Beams (FRIB) at Michigan State University will use projectile fragmentation and induced in-flight fission of heavy-ion primary beams at energies of 200 MeV/u and higher and at a beam power of 400 kW to generate rare isotope beams for experiments in nuclear physics, nuclear astrophysics, and fundamental symmetries, as well as for societal needs. The Advanced Rare Isotope Separator (ARIS) has been designed as a three-stage fragment separator for the efficient collection and purification of the rare isotope beams of interest. A vertically bending preseparator (first stage) with production target and beam dump is fully integrated into a production target facility hot cell with remote handling. The new separator compresses the accepted momentum width of up to ±5% of the beam by a factor of three in the standard operational mode. Provisions for alternate operational modes for specific cases are included in the design. This preseparator is followed by two, horizontally-bending separator stages (second and third stages) utilizing the magnets from the existing A1900 fragment separator at the National Superconducting Cyclotron Laboratory (NSCL). These stages can alternatively be coupled to a single high-resolution separator stage, resulting in the flexibility to optimize the operation for different experiments, including momentum tagging and in-flight particle identification of rare isotope beams. The design of ARIS will be presented with an emphasis on beam physics characteristics, and anticipated operational modes will be described.

Probing the central engine and environment of AGN using ARIES 1.3-m and 3.6-m telescopes

Science.gov (United States)

Chand, Hum; Rakshit, Suvendu; Jalan, Priyanka; Ojha, Vineet; Srianand, Raghunathan; Vivek, Mariappan; Mishra, Sapna; Omar, Amitesh; Kumar, Parveen; Joshi, Ravi; Gopal-Krishna; Kumar, Rathna

2018-04-01

We discuss three long term observational programmes to probe the central engine and environment of active galactic nuclei (AGN) using the recently installed ARIES 1.3-m and 3.6-m telescopes. The first programme is on the photometric reverberation mapping of low luminosity AGN by mainly using the ARIES 1.3-m telescope. The major impact of this programme other than to estimate the black hole mass will be to extend the broad line region (BLR) radius-luminosity (RBLR-LAGN) relation to the unexplored low luminosity regime, and to constrain the AGN broad line region geometry. The second programme is to use long slit spectroscopy on the ARIES 3.6-m telescope to discover new high redshift quasar pairs with angular separation less than 1-arcmin. Here, the background QSOs sight-line will be used to probe the environment of the foreground QSOs at kpc-Mpc scales. The major impact of this programme will be on the discovery of new pairs which have been missed in the SDSS survey due to fiber collision below 1-arcmin separation, and use them to understand about any excess overdensity around the QSO, any anisotropic emission of QSOs, and/or any episodic activity of QSOs. The third programme is related to spectral variability studies of the C IV broad absorption line (BAL) QSOs, based on low resolution spectroscopy using the ARIES 3.6-m telescope. Here, those most interesting cases will be monitored, where the BAL flow emerges afresh or disappears completely in the C IV trough of BAL QSOs sample as seen in SDSS multi-epoch observations. Continuous monitoring of such a sample will be important for our understanding of the nature and origin of the flow, along with their stability and dynamical evolution.

Pendidikan Karakter Menurut K.H. Hasyim Asy'ari Dalam Kitab Adâb Al-‘Âlim Wa Al-Muta‘Allim

OpenAIRE

Sholikah, Sholikah

2015-01-01

The article deals with K.H. Hasyim Asy'ari's thought of character education. The result of the study indicates that according to K.H. Hasyim Asy'ari the characters of teachers and students in his work Adab al-‘Âlim wa al-Muta'allim can be classified into three parts, are mentality or character, which should be possessed by teachers and learners: attempts to be done in order to become characterized teachers and learners, and: teaching strategies employed by educators and learning strategies us...

Safety and environmental aspects of the HYLIFE-II and ARIES fusion reactor designs

International Nuclear Information System (INIS)

Dolan, T.J.; Longhurst, G.R.; Herring, J.S.

1993-01-01

The HYLIFE-II inertial confinement fusion reactor design uses jets of Flibe molten salt to protect the blast chamber walls and to breed tritium. It has a low tritium inventory and effective tritium removal. The issue with this design is not one of safety but of economics. The ARIES reactor designs have safety concerns associated with fires. These reactors designs are described

PENDIDIKAN KARAKTER MENURUT K.H. HASYIM ASY’ARI DALAM KITAB ADÂB AL-‘ÂLIM WA AL-MUTA‘ALLIM

Directory of Open Access Journals (Sweden)

Sholikah Sholikah

2015-09-01

Full Text Available The article deals with K.H. Hasyim Asy’ari’s thought of character education. The result of the study indicates that according to K.H. Hasyim Asy’ari the characters of teachers and students in his work Adab al-‘Âlim wa al-Muta’allim can be classified into three parts, are mentality or character, which should be possessed by teachers and learners: attempts to be done in order to become characterized teachers and learners, and: teaching strategies employed by educators and learning strategies used by learners. These three parts have compatible indicators with the competence of educators stated in UU Sisdiknas (The Legislation of National Educational System year 2003 along with 18 values of character promulgated by Pusat Kurikulum Pengembangan dan Pendidikan Budaya dan Karakter Bangsa. Moreover, according to K.H. Hasyim Asy’ari, the relevance of character education with the context of character education in Indonesia consists of a number of character education elements, namely the meaning and goal of character education, the values of character for both teachers and students, the rationale of character education, the method of character education, the media of character education, and the evaluation of character education

Shear Bond Strength of Three Orthodontic Bonding Systems on Enamel and Restorative Materials

Directory of Open Access Journals (Sweden)

Andreas Hellak

2016-01-01

Full Text Available Objective. The aim of this in vitro study was to determine the shear bond strength (SBS and adhesive remnant index (ARI score of two self-etching no-mix adhesives (iBond™ and Scotchbond™ on different prosthetic surfaces and enamel, in comparison with the commonly used total etch system Transbond XT™. Materials and Methods. A total of 270 surfaces (1 enamel and 8 restorative surfaces, n=30 were randomly divided into three adhesive groups. In group 1 (control brackets were bonded with Transbond XT primer. In the experimental groups iBond adhesive (group 2 and Scotchbond Universal adhesive (group 3 were used. The SBS was measured using a Zwicki 1120™ testing machine. The ARI and SBS were compared statistically using the Kruskal–Wallis test (P≤0.05. Results. Significant differences in SBS and ARI were found between the control group and experimental groups. Conclusions. Transbond XT showed the highest SBS on human enamel. Scotchbond Universal on average provides the best bonding on all other types of surface (metal, composite, and porcelain, with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures on restorative materials in patients. If metal brackets have to be bonded to a metal surface, the use of a dual-curing resin is recommended.

Shear Bond Strength of Three Orthodontic Bonding Systems on Enamel and Restorative Materials.

Science.gov (United States)

Hellak, Andreas; Ebeling, Jennifer; Schauseil, Michael; Stein, Steffen; Roggendorf, Matthias; Korbmacher-Steiner, Heike

2016-01-01

Objective. The aim of this in vitro study was to determine the shear bond strength (SBS) and adhesive remnant index (ARI) score of two self-etching no-mix adhesives (iBond ™ and Scotchbond ™ ) on different prosthetic surfaces and enamel, in comparison with the commonly used total etch system Transbond XT ™ . Materials and Methods . A total of 270 surfaces (1 enamel and 8 restorative surfaces, n = 30) were randomly divided into three adhesive groups. In group 1 (control) brackets were bonded with Transbond XT primer. In the experimental groups iBond adhesive (group 2) and Scotchbond Universal adhesive (group 3) were used. The SBS was measured using a Zwicki 1120 ™ testing machine. The ARI and SBS were compared statistically using the Kruskal-Wallis test ( P ≤ 0.05). Results . Significant differences in SBS and ARI were found between the control group and experimental groups. Conclusions . Transbond XT showed the highest SBS on human enamel. Scotchbond Universal on average provides the best bonding on all other types of surface (metal, composite, and porcelain), with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures on restorative materials in patients. If metal brackets have to be bonded to a metal surface, the use of a dual-curing resin is recommended.

Assessment of contamination and origin of metals in mining affected river sediments: A case study of the Aries catchment, Romania

Directory of Open Access Journals (Sweden)

Levei Erika

2014-01-01

Full Text Available The study presents the current status of contamination with metals (Cu, Cr, Cd, Pb, Ni, Zn, As and their anthropogenic or natural origin in the sediments of the Aries river basin, Romania, affected by mining activities. The results indicated an enrichment of metals in sediments. Different contamination levels were identified on the Aries river and its tributaries. According to sediment quality guidelines and contamination indices, sediments from the Aries river were found to be highly contaminated with Cd, Cu, As, considerably with Zn and moderately with Pb and Ni. The right-bank tributaries were found to be more contaminated than the left-bank affluents, where only a contamination with As of geogenic origin was identified. The Principal Component Analysis allowed to identify five latent factors (86 % total variability reflecting the anthropogenic and natural origins of metals. Arsenic, Cd and partially Pb were found to have a common anthropogenic origin, different from that of Cu. The statistical approach indicated also the geogenic origin of Pb due to its association with Ca, K, Na, Sr. Chromium and Ni were attributed to natural source following their association with Mn, Fe, Al and Mg, respectively.

The Implementation of Acute Respiratory Infection (ARI Controlling Programme and the Coverage of Pneumonia among Under-Five Children

Directory of Open Access Journals (Sweden)

Ni'mal Baroya

2018-01-01

Full Text Available Abstract Pneumonia is an acute infection of lung tissue (alveoli. Pneumonia is one of the main focus ARI preventing and controlling program.  One of the ARI preventing and controlling program indicators was pneumonia coverage among under five years old. The coverage of pneumonia finding among under five years old in Banyuwangi Regency since 2014-2016 years have not reached the national target. Pneumonia toddler coverage in 2014 and 2015 shows 33,7% and 71,1%, while in 2016 shows 41,99%. This research aims to analyze the association between officer characteristics, logistics availability and ARI control activities with pneumonia toddler coverage in Banyuwangi Regency. The research uses cross sectional analytic desain with 31 respondents. The result of this research has significant relationship is age, work length and capacity buailding. Nevertheless, gender, education, knowladge, availability of diagnostic tools, guideline, KIE media, recording and reporting media, advocation and socialisation, pneumonia find and management, supervision, recording and reporting, partnership and network, monitoring and evaluation has not significant relationship. Banyuwangi Health Office is hoped to do conduct periodic training every year to ARI program officer on ARI control management, management of pneumonia toddler and promotion of pneumonia control in under fives to increase human resources capacity in primary health facility.                 Abstrak Pneumonia merupakan salah satu fokus utama Program Pencegahan dan Pengendalian ISPA. Salah satu indikator program P2 ISPA adalah cakupan penemuan pneumonia balita. Cakupan pneumonia pada balita di Kabupaten Banyuwangi dari tahun 2014-2016 belum mencapai target nasional. Pada tahun 2014 dan 2015 cakupan pneumonia pada balita sebesar 33,7% dan 71,1% sedangkan tahun 2016 sebesar 41,99%. Penelitian ini bertujuan menganalisis hubungan antara karakteristik petugas, ketersediaan  logistik dan kegiatan

Limiter discriminator detection of M-ary FSK signals

Science.gov (United States)

Fonseka, John P.

1990-10-01

The performance of limiter discriminator detection of M-ary FSK signals is analyzed at arbitrary modulation indices. It is shown that the error rate performance of limiter discriminator detection can be significantly improved by increasing the modulation index above 1/M. The optimum modulation index that minimizes the overall error probability is determined for the cases M = 2, 4 and 8. The analysis is carried out for wideband and bandlimited channels with Gaussian and second-order Butterworth filters. It is shown that the optimum modulation index depends on the signal/noise ratio (SNR), in a wideband channel, and on both SNR and time-bandwidth product in a bandlimited channel. Finally, it is shown that the optimum sampling instance in presence of a nonzero phase IF filter can be approximately determined by using only the worst case symbol pattern.

Wild and semi-wild leafy vegetables used by the Maale and Ari ethnic communities in southern Ethiopia

NARCIS (Netherlands)

Kidane, Berhane; Maesen, van der L.J.G.; Asfaw, Zemede; Sosef, M.S.M.; Andel, van Tinde

2015-01-01

We studied wild and semi-wild leafy vegetables used by the Maale and Ari ethnic communities in southern Ethiopia. Quantitative and qualitative ethnobotanical methods, including individual and focus group (n = 18) discussions, field observations, and individual interviews (n = 144), were used in

An advanced computational algorithm for systems analysis of tokamak power plants

International Nuclear Information System (INIS)

Dragojlovic, Zoran; Rene Raffray, A.; Najmabadi, Farrokh; Kessel, Charles; Waganer, Lester; El-Guebaly, Laila; Bromberg, Leslie

2010-01-01

A new computational algorithm for tokamak power plant system analysis is being developed for the ARIES project. The objective of this algorithm is to explore the most influential parameters in the physical, technological and economic trade space related to the developmental transition from experimental facilities to viable commercial power plants. This endeavor is being pursued as a new approach to tokamak systems studies, which examines an expansive, multi-dimensional trade space as opposed to traditional sensitivity analyses about a baseline design point. The new ARIES systems code consists of adaptable modules which are built from a custom-made software toolbox using object-oriented programming. The physics module captures the current tokamak physics knowledge database including modeling of the most-current proposed burning plasma experiment design (FIRE). The engineering model accurately reflects the intent and design detail of the power core elements including accurate and adjustable 3D tokamak geometry and complete modeling of all the power core and ancillary systems. Existing physics and engineering models reflect both near-term as well as advanced technology solutions that have higher performance potential. To fully assess the impact of the range of physics and engineering implementations, the plant cost accounts have been revised to reflect a more functional cost structure, supported by an updated set of costing algorithms for the direct, indirect, and financial cost accounts. All of these features have been validated against the existing ARIES-AT baseline case. The present results demonstrate visualization techniques that provide an insight into trade space assessment of attractive steady-state tokamaks for commercial use.

A cartography and GIS consultancy mission to the Agricultural Research Institute (ARI) in Mlingano, Tanzania, september 1999

NARCIS (Netherlands)

Schuiling, C.

2000-01-01

The Agricultural Research Institute (ARI) in Mlingano, Tanzania made a start with GIS activities at the end of 1998. After purchasing GIS hardware and software and basic training courses, Alterra was invited to carry out a consultancy mission to solvepractical problems with map projection, map

Demonstration of micro-projection enabled short-range communication system for 5G.

Science.gov (United States)

Chou, Hsi-Hsir; Tsai, Cheng-Yu

2016-06-13

A liquid crystal on silicon (LCoS) based polarization modulated image (PMI) system architecture using red-, green- and blue-based light-emitting diodes (LEDs), which offers simultaneous micro-projection and high-speed data transmission at nearly a gigabit, serving as an alternative short-range communication (SRC) approach for personal communication device (PCD) application in 5G, is proposed and experimentally demonstrated. In order to make the proposed system architecture transparent to the future possible wireless data modulation format, baseband modulation schemes such as multilevel pulse amplitude modulation (M-PAM), M-ary phase shift keying modulation (M-PSK) and M-ary quadrature amplitude modulation (M-QAM) which can be further employed by more advanced multicarrier modulation schemes (such as DMT, OFDM and CAP) were used to investigate the highest possible data transmission rate of the proposed system architecture. The results demonstrated that an aggregative data transmission rate of 892 Mb/s and 900 Mb/s at a BER of 10^(-3) can be achieved by using 16-QAM baseband modulation scheme when data transmission were performed with and without micro-projection simultaneously.

TSKT-ORAM: A Two-Server k-ary Tree Oblivious RAM without Homomorphic Encryption

Directory of Open Access Journals (Sweden)

Jinsheng Zhang

2017-09-01

Full Text Available This paper proposes TSKT-oblivious RAM (ORAM, an efficient multi-server ORAM construction, to protect a client’s access pattern to outsourced data. TSKT-ORAM organizes each of the server storages as a k-ary tree and adopts XOR-based private information retrieval (PIR and a novel delayed eviction technique to optimize both the data query and data eviction process. TSKT-ORAM is proven to protect the data access pattern privacy with a failure probability of 2 - 80 when system parameter k ≥ 128 . Meanwhile, given a constant-size local storage, when N (i.e., the total number of outsourced data blocks ranges from 2 16 – 2 34 , the communication cost of TSKT-ORAM is only 22–46 data blocks. Asymptotic analysis and practical comparisons are conducted to show that TSKT-ORAM incurs lower communication cost, storage cost and access delay in practical scenarios than the compared state-of-the-art ORAM schemes.

GASNet-EX Performance Improvements Due to Specialization for the Cray Aries Network

Energy Technology Data Exchange (ETDEWEB)

Hargrove, Paul H.; Bonachea, Dan

2018-03-27

This document is a deliverable for milestone STPM17-6 of the Exascale Computing Project, delivered by WBS 2.3.1.14. It reports on the improvements in performance observed on Cray XC-series systems due to enhancements made to the GASNet-EX software. These enhancements, known as “specializations”, primarily consist of replacing network-independent implementations of several recently added features with implementations tailored to the Cray Aries network. Performance gains from specialization include (1) Negotiated-Payload Active Messages improve bandwidth of a ping-pong test by up to 14%, (2) Immediate Operations reduce running time of a synthetic benchmark by up to 93%, (3) non-bulk RMA Put bandwidth is increased by up to 32%, (4) Remote Atomic performance is 70% faster than the reference on a point-to-point test and allows a hot-spot test to scale robustly, and (5) non-contiguous RMA interfaces see up to 8.6x speedups for an intra-node benchmark and 26% for inter-node. These improvements are available in the GASNet-EX 2018.3.0 release.

Low-sampling-rate M-ary multiple access UWB communications in multipath channels

KAUST Repository

Alkhodary, Mohammad T.

2015-08-31

The desirable characteristics of ultra-wideband (UWB) technology are challenged by formidable sampling frequency, performance degradation in the presence of multi-user interference, and complexity of the receiver due to the channel estimation process. In this paper, a low-rate-sampling technique is used to implement M-ary multiple access UWB communications, in both the detection and channel estimation stages. A novel approach is used for multiple-access-interference (MAI) cancelation for the purpose of channel estimation. Results show reasonable performance of the proposed receiver for different number of users operating many times below Nyquist rate.

Low-sampling-rate M-ary multiple access UWB communications in multipath channels

KAUST Repository

Alkhodary, Mohammad T.; Ballal, Tarig; Al-Naffouri, Tareq Y.; Muqaibel, Ali H.

2015-01-01

The desirable characteristics of ultra-wideband (UWB) technology are challenged by formidable sampling frequency, performance degradation in the presence of multi-user interference, and complexity of the receiver due to the channel estimation process. In this paper, a low-rate-sampling technique is used to implement M-ary multiple access UWB communications, in both the detection and channel estimation stages. A novel approach is used for multiple-access-interference (MAI) cancelation for the purpose of channel estimation. Results show reasonable performance of the proposed receiver for different number of users operating many times below Nyquist rate.

Image processing algorithm design and implementation for real-time autonomous inspection of mixed waste

International Nuclear Information System (INIS)

Schalkoff, R.J.; Shaaban, K.M.; Carver, A.E.

1996-01-01

The ARIES number-sign 1 (Autonomous Robotic Inspection Experimental System) vision system is used to acquire drum surface images under controlled conditions and subsequently perform autonomous visual inspection leading to a classification as 'acceptable' or 'suspect'. Specific topics described include vision system design methodology, algorithmic structure,hardware processing structure, and image acquisition hardware. Most of these capabilities were demonstrated at the ARIES Phase II Demo held on Nov. 30, 1995. Finally, Phase III efforts are briefly addressed

Sketsa Karya Ari Nur Utami: Arsitektur Urban dalam Perspektif Ekokritisisme

Directory of Open Access Journals (Sweden)

Usma Nur Dian Rosyidah

2013-12-01

Full Text Available Kota adalah ruang kompleks bagi siapa pun yang berada di dalamnya. Saat ini, penghuni ruang kota terancam oleh menurunnya kualitas ekologis kota akibat pembangunan gedung, berbagai fasilitas. dan infrastruktur kota yang masif. Salah satu novel yang memotret eksploitasi ekologi kota tersebut adalah Sketsa karya Ari Nur Utami. Sebagai novel berlatar belakang arsitektur, Sketsa menceritakan pembangunan gedung di Jakarta oleh pengembang bernama PT Semesta Sentosa. Menggunakan teori ekokritisisme, fokus diskusi dalam artikel ini adalah cara penulis memasukkan nilai dan asumsi ekokritik dalam arsitektur urban di novel Sketsa. Tulisan ini bertujuan untuk menguraikan dominasi pandangan antroposentris individu terhadap alam. Melalui metode kualitatif­deskriptif dengan melakukan close­reading, hasil pembahasan menunjukkan bahwa pembangunan di Jakarta dengan berbagai proyek arsitektur urbannya masih mengabaikan kelestarian lingkungan. Ketidakpedulian terhadap lingkungan ini dapat dilihat dari orientasi etis dan linguistik antroposentris yang dipilih demi mendapatkan keuntungan besar dalam bisnis properti di Jakarta. Abstract: City is a space that contains complexities for anyone being part of it. Nowadays, people are threatened by the ecologically degrading city as the result of the massive development of buildings and other city’s facilities and infrastructures. A novel portraying the issues of ecological exploitation is Ari Nur Utami’s Sketsa. Being claimed as an architectural background novel, Sketsa portrays the development of buildings in Jakarta by a property developer named PT Semesta Sentosa. By applying ecocriticism theory, one point discussed in this article is how the author imputes certain ecocritical values and assumptions in presenting the urban architecture in Sketsa. The objective of this research is to elaborate the domination of anthropocentric perspective over nature. Through the qualitative­descriptive method, it is found that

PESANTREN DAN POLITIK (Sinergi Pendidikan Pesantren dan Kepemimpinan dalam Pandangan KH. M. Hasyim Asy’ari

Directory of Open Access Journals (Sweden)

Zaini Tamin Abd Rohim

2015-11-01

Full Text Available Pesantren and politics are two different terms which may have a synergy in a social reality and a history of archipelago. This study refers to the thought of Hasyim Asy’ari about Islamic education, pesantren, and its role in a national life. Historically, the existence of pesantren aims to preserve Islamic values especially on education and to educate students to be well-knowledged people who are capable of using their knowledge in society and have a noble character. Some studies by Hasyim Asy’ari explain that the goal of Islamic education does not merely bring out education outcome on the cognitive level, but also on the practice level where students can make use of knowledge they have learned or so-called useful knowledge (‘ilm na>fi’. These aforesaid goal becomes the pesantren’s priority which combines intellectual, emotional, and spiritual skills to build a students’ character. Character is a prominent factor in leadership, an ability to step out of the existing culture and make an evolutionary change which is far adaptive. Hence, since Pesantren is valued as a hub of character education, it plays a role to build students’ character either intellectual and social abilities or leadership skills.

Expert systems as decision tools

International Nuclear Information System (INIS)

Scott, C.K.

1989-01-01

The feasibility of using expert systems as an aid in regulatory compliance functions has been investigated. A literature review was carried out to identify applications of expert systems to regulatory affairs. A bibliography of the small literature on such applications was prepared. A prototype system, ARIES, was developed to demonstrate the use of an expert system as an aid to a Project Officer in assuring compliance with licence requirements. The system runs on a personal computer with a graphical interface. Extensive use is made of hypertext to link interrelated rules and requirements as well as to provide an explanation facility. Based on the performance of ARIES the development of a field version is recommended

Comments concerning the real risk of sexual adverse events secondary to the use of 5-ARIs

Directory of Open Access Journals (Sweden)

Furio Pirozzi Farina

2016-01-01

Full Text Available Treatment-induced sexual dysfunctions (SD are a recurrent and controversial topic in recent literature on the adverse events related to the use of 5-alpha-reductase inhibitors (5ARIs (1, 2. In order to deal adequately with the various aspects of this topic, it is necessary to first cover some of the steps that allow a better definition and understanding of the subject.

Physics Basis for the Advanced Tokamak Fusion Power Plant ARIES-AT

Energy Technology Data Exchange (ETDEWEB)

S.C. Jardin; C.E. Kessel; T.K. Mau; R.L. Miller; F. Najmabadi; V.S. Chan; M.S. Chu; R. LaHaye; L.L. Lao; T.W. Petrie; P. Politzer; H.E. St. John; P. Snyder; G.M. Staebler; A.D. Turnbull; W.P. West

2003-10-07

The advanced tokamak is considered as the basis for a fusion power plant. The ARIES-AT design has an aspect ratio of A always equal to R/a = 4.0, an elongation and triangularity of kappa = 2.20, delta = 0.90 (evaluated at the separatrix surface), a toroidal beta of beta = 9.1% (normalized to the vacuum toroidal field at the plasma center), which corresponds to a normalized beta of bN * 100 x b/(I(sub)P(MA)/a(m)B(T)) = 5.4. These beta values are chosen to be 10% below the ideal-MHD stability limit. The bootstrap-current fraction is fBS * I(sub)BS/I(sub)P = 0.91. This leads to a design with total plasma current I(sub)P = 12.8 MA, and toroidal field of 11.1 T (at the coil edge) and 5.8 T (at the plasma center). The major and minor radii are 5.2 and 1.3 m, respectively. The effects of H-mode edge gradients and the stability of this configuration to non-ideal modes is analyzed. The current-drive system consists of ICRF/FW for on-axis current drive and a lower-hybrid system for off-axis. Tran sport projections are presented using the drift-wave based GLF23 model. The approach to power and particle exhaust using both plasma core and scrape-off-layer radiation is presented.

Physics Basis for the Advanced Tokamak Fusion Power Plant ARIES-AT

International Nuclear Information System (INIS)

Jardin, S.C.; Kessel, C.E.; Mau, T.K.; Miller, R.L.; Najmabadi, F.; Chan, V.S.; Chu, M.S.; LaHaye, R.; Lao, L.L.; Petrie, T.W.; Politzer, P.; John, St. H.E.; Snyder, P.; Staebler, G.M.; Turnbull, A.D.; West, W.P.

2003-01-01

The advanced tokamak is considered as the basis for a fusion power plant. The ARIES-AT design has an aspect ratio of A always equal to R/a = 4.0, an elongation and triangularity of kappa = 2.20, delta = 0.90 (evaluated at the separatrix surface), a toroidal beta of beta = 9.1% (normalized to the vacuum toroidal field at the plasma center), which corresponds to a normalized beta of bN * 100 x b/(I(sub)P(MA)/a(m)B(T)) = 5.4. These beta values are chosen to be 10% below the ideal-MHD stability limit. The bootstrap-current fraction is fBS * I(sub)BS/I(sub)P = 0.91. This leads to a design with total plasma current I(sub)P = 12.8 MA, and toroidal field of 11.1 T (at the coil edge) and 5.8 T (at the plasma center). The major and minor radii are 5.2 and 1.3 m, respectively. The effects of H-mode edge gradients and the stability of this configuration to non-ideal modes is analyzed. The current-drive system consists of ICRF/FW for on-axis current drive and a lower-hybrid system for off-axis. Tran sport projections are presented using the drift-wave based GLF23 model. The approach to power and particle exhaust using both plasma core and scrape-off-layer radiation is presented

Sarmatian Attributes in Archaeological Complexes of Catacombs Burials in Arys Culture of Southern Kazakhstan (1st Century B.C. - 3rd Century A.D.

Directory of Open Access Journals (Sweden)

Podushkin Aleksandr Nikolaevich

2015-12-01

Full Text Available The publication is devoted to archaeological research of monuments of the catacomb of Arys culture of Southern Kazakhstan (1st Century B.C. - 3rd Century A.D.. Now scientists have a complete understanding of the range and typology, periodization and chronology of monuments of this culture. There are three stages: Karaultobe (4th century B.C. - 1st century A.D.; Karatobe (1st Century B.C. - 4th century A.D.; Altintobe (4th-6th centuries A.D.. These stages are characterized by specific clusters of signs in the form of artifacts. The author also carried out the ethnic attribution of the Arys culture in association with the ancient state Kangiuj. As a result of this work, the ethnicity of the state Kangiuj was revealed: in particular, late Saka’s, Sarmatian, Huns and Kangiuj ethnic components which are relevant to archaeological complexes, were identified. In the Arys monuments of culture the author discovered complexes of findings which associated with the Sarmatian world of Eurasia by their ethno-cultural parameters. They include typical for the Sarmatians list of ritual action and the funerary equipment, including weapons, bronze mirrors, ritual and religious objects, signs-tamgas, jewelry (including Egyptian faience, articles in “animal”, gold-turquoise and polychrome style. The characteristics of the burial complexes of catacombs of the Arys culture discussed in the publication and corresponding to chronological calculations and ethno-cultural interpretations, allow to speak about presence in the territory of South Kazakhstan of the Asian Sarmatians or any local branch of the Union of the Sarmatian tribes in the 1st century B.C. - 3rd century A.D.

ARIES Oxide Production Program Assessment of Risk to Long-term Sustainable Production Rate

Energy Technology Data Exchange (ETDEWEB)

Whitworth, Julia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lloyd, Jane Alexandria [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Majors, Harry W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-05-04

This report describes an assessment of risks and the development of a risk watch list for the ARIES Oxide Production Program conducted in the Plutonium Facility at LANL. The watch list is an active list of potential risks and opportunities that the management team periodically considers to maximize the likelihood of program success. The initial assessments were made in FY 16. The initial watch list was reviewed in September 2016. The initial report was not issued. Revision 1 has been developed based on management review of the original watch list and includes changes that occurred during FY-16.

First wall/blanket/shield design and power conversion for the ARIES-IV tokamak fusion reactor

International Nuclear Information System (INIS)

Hasan, M.Z.; Conn, R.W.; Najmabadi, F.

1994-01-01

ARIES-IV is a conceptual, D-T burning, steady-state tokamak fusion reactor producing 1000 MWe net. It operates in the second plasma stability regime. The structural material is SiC composite and the primary coolant is helium at 10 MPa base pressure. The coolant flows poloidally in two loops, one inboard and one outboard. The coolant channels are circular tubes that form shells and are placed between two purge plates; the space between two adjacent tubes and the plate is purge gas flow area. The solid breeder is Li 2 O, and Be is used as neutron multiplier to ensure adequate TBR. Beryllium and Li 2 O are placed in between the adjacent tube shells. A computer code was developed to perform and optimize thermal-hydraulic design. Minimization of blanket thickness and the amount of Be, and the maximization of breeder zone thickness were done by iteration with neutronics. The gross thermal efficiency is 49%. The cost of electricity is 68 mills/kWh. The use of low activation SiC composite as the structural material, Li 2 O as the solid breeder, and avoidance of tungsten in the divertor has resulted in a good safety performance, and LSA rating of 1. Overall, SiC/He/Li 2 O ARIES-IV design is expected to have attractive economic and safety advantages

The Impact of Combination Therapy with a-Blockers and 5ARIs on the Progression of BPH.

Science.gov (United States)

Sountoulides, Petros; Gravas, Stavros

2015-01-01

Benign prostatic hyperplasia (BPH) can be a progressive disease for some men with significant impact on their quality of life due to worsening of symptoms, risk of acute urinary retention (AUR) and surgery. Certain clinical parameters such as age, prostate volume and PSA are able to predict those patients with BPH-associated LUTS that are at risk of disease progression. These patients will likely benefit most from medical therapy that provides symptom relief while at the same time may prevent disease progression. Studies have shown that a-blockers, although able to rapidly alleviate symptoms, have no effect on prostate volume, risk for AUR and BPH-related surgery. On the other hand 5ARIs have proven their efficacy in reducing prostate size, the risk of AUR and prostate surgery. Therefore combination therapy with an a-blocker and a 5ARI can be the mainstay of treatment for those patients at risk of BPH progression. Patients' perspective and their needs and expectations from treatment are other crucial parameters to consider in order selecting the optimal management of BPH. Therefore physicians should take into consideration the drug properties and also the patients' preferences before deciding on the optimal pharmacological treatment for BPH-associated LUTS.

MITLL 2015 Language Recognition Evaluation System Description

Science.gov (United States)

2016-01-27

912 8.18 qsl-rus Russian 2021 37.80 ara-ary Maghrebi 919 46.91 spa-car Carib. Spa. 194 30.59 ara-arz Egyptian 440 97.27 spa-eur Eur. Spa. 366 8.55...qsl-pol Polish 695 32.14 ara-arb MSA 912 8.18 qsl-rus Russian 2021 37.80 ara-ary Maghrebi 919 46.91 spa-car Carib. Spa. 194 30.59 ara-arz Egyptian ...BOTTLENECK I-VECTOR SYSTEM (BNF1) The Deep Neural Network architecture that we used for this system was composed of seven hidden layers. The sixth

Fusion reactor systems studies

International Nuclear Information System (INIS)

1993-01-01

Fusion Technology Institute personnel actively participated in the ARIES/PULSAR project during the present contract period. Numerous presentations were made at PULSAR project meetings, major contributions were written for the ARIES-II/IV Final Report presentations and papers were given at technical conferences contributions were written for the ARIES Lessons Learned report and a very large number of electronic-mail and regular-mail communications were sent. The remaining sections of this progress report win summarize the work accomplished and in progress for the PULSAR project during the contract period. The main areas of effort are: PULSAR Research; ARIES-II/IV Report Contributions; ARIES Lessons Learned Report Contributions; and Stellarator Study

Lessons learned from the tokamak Advanced Reactor Innovation and Evaluation Study (ARIES)

International Nuclear Information System (INIS)

Krakowski, R.A.; Bathke, C.G.; Miller, R.L.; Werley, K.A.

1994-01-01

Lessons from the four-year ARIES (Advanced Reactor Innovation and Evaluation Study) investigation of a number of commercial magnetic-fusion-energy (MFE) power-plant embodiments of the tokamak are summarized. These lessons apply to physics, engineering and technology, and environmental, safety, and health (ES ampersand H) characteristics of projected tokamak power plants. Summarized herein are the composite conclusions and lessons developed in the course of four conceptual tokamak power-plant designs. A general conclusion from this extensive investigation of the commercial potential of tokamak power plants is the need for combined, symbiotic advances in both physics, engineering, and materials before economic competitiveness with developing advanced energy sources can be realized. Advances in materials are also needed for the exploitation of environmental advantages otherwise inherent in fusion power

Lessons learned from the Tokamak Advanced Reactor Innovation and Evaluation Study (ARIES)

International Nuclear Information System (INIS)

Krakowski, R.A.; Bathke, C.G.; Miller, R.L.; Werley, K.A.

1994-01-01

Lessons from the four-year ARIES (Advanced Reactor Innovation and Evaluation Study) investigation of a number of commercial magnetic-fusion-energy (MFE) power-plant embodiments of the tokamak are summarized. These lessons apply to physics, engineering and technology, and environmental, safety and health (ES ampersand H) characteristics of projected tokamak power plants. A general conclusion from this extensive investigation of the commercial potential of tokamak power plants is the need for combined, symbiotic advances relative to present understanding in physics, engineering, and materials before economic competitiveness with developing advanced energy sources can be realized. Advanced tokamak plasmas configured in the second-stability regime that achieve both high β and bootstrap fractions near unity through strong profile control offer high promise in this regard

A Low-Complexity Joint Detection-Decoding Algorithm for Nonbinary LDPC-Coded Modulation Systems

OpenAIRE

Wang, Xuepeng; Bai, Baoming; Ma, Xiao

2010-01-01

In this paper, we present a low-complexity joint detection-decoding algorithm for nonbinary LDPC codedmodulation systems. The algorithm combines hard-decision decoding using the message-passing strategy with the signal detector in an iterative manner. It requires low computational complexity, offers good system performance and has a fast rate of decoding convergence. Compared to the q-ary sum-product algorithm (QSPA), it provides an attractive candidate for practical applications of q-ary LDP...

Strongly correlated systems experimental techniques

CERN Document Server

Mancini, Ferdinando

2015-01-01

The continuous evolution and development of experimental techniques is at the basis of any fundamental achievement in modern physics. Strongly correlated systems (SCS), more than any other, need to be investigated through the greatest variety of experimental techniques in order to unveil and crosscheck the numerous and puzzling anomalous behaviors characterizing them. The study of SCS fostered the improvement of many old experimental techniques, but also the advent of many new ones just invented in order to analyze the complex behaviors of these systems. Many novel materials, with functional properties emerging from macroscopic quantum behaviors at the frontier of modern research in physics, chemistry and materials science, belong to this class of systems. The volume presents a representative collection of the modern experimental techniques specifically tailored for the analysis of strongly correlated systems. Any technique is presented in great detail by its own inventor or by one of the world-wide recognize...

Antimicrobial susceptibility of Eschericia coli isolates from Arieş river (Romania

Directory of Open Access Journals (Sweden)

Andreea BODOCZI FLOREA

2011-05-01

Full Text Available We studied the prevalence of antimicrobial resistance (AR and multiple antimicrobial resistances (MAR among the faecal bacteria found in the Arieş river (Romania affected by strong anthropogenic pressures. Isolation and identification of E. coli were done by using enrichment media, selective media, and biochemical tests. Antimicrobial susceptibility testing by the disk diffusion method was conducted for 12 antimicrobial agents: ciprofloxacin, gentamicin, streptomycin, ceftazidin, ofloxacin, sulfamethoxazole, ticarcycline, ampicillin, nalidixic acid, nitrofurantoin, erythromycin, and norfloxacin. The data of the antimicrobial susceptibility reviled that all the studied E. coli strains were resistant to most of the tested antibiotics. The analysis of antibiotic resistance frequencies has showed an incidence of 46.66% strains resistant to more than 4 different antibiotics. Moreover, a high incidence of multiple antibiotic resistances was detected in each of the studied samples.

Optical monitoring of Active Galactic Nuclei from ARIES

Science.gov (United States)

Gopal-Krishna; Wiita, Paul Joseph

2018-04-01

This overview provides a historical perspective highlighting the pioneering role which the fairly modest observational facilities of ARIES have played since the 1990s in systematically characterizing the optical variability on hour-like time scale (intra-night optical variability, or INOV) of several major types of high-luminosity Active Galactic Nuclei (AGN). Such information was previously available only for blazars. Similar studies have since been initiated in at least a dozen countries, giving a boost to AGN variability research. Our work has, in particular, provided strong indication that mild INOV occurs in radio-quiet QSOs (amplitude up to 3 – 5 % and duty cycle 10%) and, moreover, has demonstrated that similarly mild INOV is exhibited even by the vast majority of radio-loud quasars which possess powerful relativistic jets (even including many that are beamed towards us). The solitary outliers are blazars, the tiny strongly polarized subset of powerful AGN, which frequently exhibit a pronounced INOV. Among the blazars, BL Lac objects often show a bluer-when-brighter chromatic behavior, while the flat spectrum radio quasars seem not to. Quantifying any differences of INOV among the major subclasses of non-blazar type AGNs will require dedicated monitoring programs using 2 - 3 metre class telescopes.

Trusses Of Tensegrity Type In A Concept Of Train Station Renovation In Żary

Directory of Open Access Journals (Sweden)

Lechocka Paulina

2015-09-01

Full Text Available The first railway station in Żary was built in 1843 in Germany. After the Second World War and years of socialism in Poland the meaning of railway decreased and its technical condition deteriorated. Now the building needs renovation and change of function. Tensegrity structures may be useful in renovation of platforms shelter. They are strut and tie construction, in which there is self-stabilization between compressed and tensioned elements. Conception of new platform shelter is based on exemplary tensegrity module consist of three struts and nine cables (called „Simplex”. Tensegrity would make railway station more modern, but not cover its original elevation.

Computer system for Monte Carlo experimentation

International Nuclear Information System (INIS)

Grier, D.A.

1986-01-01

A new computer system for Monte Carlo Experimentation is presented. The new system speeds and simplifies the process of coding and preparing a Monte Carlo Experiment; it also encourages the proper design of Monte Carlo Experiments, and the careful analysis of the experimental results. A new functional language is the core of this system. Monte Carlo Experiments, and their experimental designs, are programmed in this new language; those programs are compiled into Fortran output. The Fortran output is then compiled and executed. The experimental results are analyzed with a standard statistics package such as Si, Isp, or Minitab or with a user-supplied program. Both the experimental results and the experimental design may be directly loaded into the workspace of those packages. The new functional language frees programmers from many of the details of programming an experiment. Experimental designs such as factorial, fractional factorial, or latin square are easily described by the control structures and expressions of the language. Specific mathematical modes are generated by the routines of the language

Tokamak reactor systems studies

International Nuclear Information System (INIS)

1992-01-01

A summary of work completed on the ARIES project during this report period is given. The main areas of effort were: neutronics, shield optimization and design, safety, systems, startup and shutdown, and ripple loss

On the Symbol Error Rate of M-ary MPSK over Generalized Fading Channels with Additive Laplacian Noise

KAUST Repository

Soury, Hamza

2015-01-07

This work considers the symbol error rate of M-ary phase shift keying (MPSK) constellations over extended Generalized-K fading with Laplacian noise and using a minimum distance detector. A generic closed form expression of the conditional and the average probability of error is obtained and simplified in terms of the Fox’s H function. More simplifications to well known functions for some special cases of fading are also presented. Finally, the mathematical formalism is validated with some numerical results examples done by computer based simulations [1].

On the Symbol Error Rate of M-ary MPSK over Generalized Fading Channels with Additive Laplacian Noise

KAUST Repository

Soury, Hamza; Alouini, Mohamed-Slim

2015-01-01

This work considers the symbol error rate of M-ary phase shift keying (MPSK) constellations over extended Generalized-K fading with Laplacian noise and using a minimum distance detector. A generic closed form expression of the conditional and the average probability of error is obtained and simplified in terms of the Fox’s H function. More simplifications to well known functions for some special cases of fading are also presented. Finally, the mathematical formalism is validated with some numerical results examples done by computer based simulations [1].

Energy conversion options for ARIES-III - A conceptual D-3He tokamak reactor

International Nuclear Information System (INIS)

Santarius, J.F.; Blanchard, J.P.; Emmert, G.A.; Sviatoslavsky, I.N.; Wittenberg, L.J.; Ghoneim, N.M.; Hasan, M.Z.; Mau, T.K.; Greenspan, E.; Herring, J.S.; Kernbichler, W.; Klein, A.C.; Miley, G.H.; Miller, R.L.; Peng, Y.K.M.

1989-01-01

The potential for highly efficient conversion of fusion power to electricity provides one motivation for investigating D- 3 He fusion reactors. This stems from: (1) the large fraction of D- 3 He power produced in the forms of charged particles and synchrotron radiation which are amenable to direct conversion, and (2) the low neutron fluence and lack of tritium breeding constraints, which increase design flexibility. The design team for a conceptual D- 3 He tokamak reactor, ARIES-III, has investigated numerous energy conversion options at a scoping level in attempting to realize high efficiency. The energy conversion systems have been studied in the context of their use on one or more of three versions of a D- 3 He tokamak: a first stability regime device, a second stability regime device, and a spherical torus. The set of energy conversion options investigated includes bootstrap current conversion, compression-expansion cycles, direct electrodynamic conversion, electrostatic direct conversion, internal electric generator, liquid metal heat engine blanket, liquid metal MHD, plasma MHD, radiation boiler, scrape-off layer thermoelectric, synchrotron radiation conversion by rectennas, synchrotron radiation conversion by thermal cycles, thermionic/AMTEC/thermal systems, and traveling wave conversion. The original set of options is briefly discussed, and those selected for further study are described in more detail. The four selected are liquid metal MHD, plasma MHD, rectenna conversion, and direct electrodynamic conversion. Thermionic energy conversion is being considered, and some options may require a thermal cycle in parallel or series. 17 refs., 3 figs., 1 tab

On the symbol error rate of M-ary MPSK over generalized fading channels with additive Laplacian noise

KAUST Repository

Soury, Hamza

2014-06-01

This paper considers the symbol error rate of M-ary phase shift keying (MPSK) constellations over extended Generalized-K fading with Laplacian noise and using a minimum distance detector. A generic closed form expression of the conditional and the average probability of error is obtained and simplified in terms of the Fox\\'s H function. More simplifications to well known functions for some special cases of fading are also presented. Finally, the mathematical formalism is validated with some numerical results examples done by computer based simulations. © 2014 IEEE.

On the symbol error rate of M-ary MPSK over generalized fading channels with additive Laplacian noise

KAUST Repository

Soury, Hamza; Alouini, Mohamed-Slim

2014-01-01

This paper considers the symbol error rate of M-ary phase shift keying (MPSK) constellations over extended Generalized-K fading with Laplacian noise and using a minimum distance detector. A generic closed form expression of the conditional and the average probability of error is obtained and simplified in terms of the Fox's H function. More simplifications to well known functions for some special cases of fading are also presented. Finally, the mathematical formalism is validated with some numerical results examples done by computer based simulations. © 2014 IEEE.

Experimental lithium system. Final report

International Nuclear Information System (INIS)

Kolowith, R.; Berg, J.D.; Miller, W.C.

1985-04-01

A full-scale mockup of the Fusion Materials Irradiation Test (FMIT) Facility lithium system was built at the Hanford Engineering Development Laboratory (HEDL). This isothermal mockup, called the Experimental Lithium System (ELS), was prototypic of FMIT, excluding the accelerator and dump heat exchanger. This 3.8 m 3 lithium test loop achieved over 16,000 hours of safe and reliable operation. An extensive test program demonstrated satisfactory performance of the system components, including the HEDL-supplied electromagnetic lithium pump, the lithium jet target, the purification and characterization hardware, as well as the auxiliary argon and vacuum systems. Experience with the test loop provided important information on system operation, performance, and reliability. This report presents a complete overview of the entire Experimental Lithium System test program and also includes a summary of such areas as instrumentation, coolant chemistry, vapor/aerosol transport, and corrosion

An intelligent inspection and survey robot

International Nuclear Information System (INIS)

Byrd, J.; Holland, J.M.

1994-01-01

ARIES (Autonomous Robotic Inspection Experimental System) is a semi-autonomous robotic system intended for use in the automatic inspection of stored containers of low-level nuclear waste. This article describes the technology and how it could be used. 3 refs., 3 figs

Simplified Soft-output Demapper Based on a Linear Transformation Technique for M-ary PSK

Directory of Open Access Journals (Sweden)

Jianping Li

2014-10-01

Full Text Available Combining channel coding with high-order modulation schemes, namely coded modulation (CM, is an efficient digital transmission technology. CM requires the demapper to provide a soft decision bit metric as a part of the inputs to the decoder. This paper proposes an efficient soft- output demapper for M-ary PSK. This novel demodulation algorithm continues to evolve the conventional MAX-Log-MAP algorithm and summarizes the final derivation into a form of matrix multiplication. The Computational complexity for getting one bit soft value of a signal by employing the proposed algorithm remains a constant with the increase of modulation order. Meanwhile, the theoretical analysis and simulation results prove that the novel simplified soft-output demapper can obtain the same performance as MAX-Log-MAP.

Experimental lithium system experience

International Nuclear Information System (INIS)

Atwood, J.M.; Berg, J.D.; Kolowith, R.; Miller, W.C.

1984-01-01

The Experimental Lithium System is a test loop built to support design and operation of the Fusion Materials Irradiation Test Facility. ELS has achieved over 15,000 hours of safe and reliable operation. An extensive test program has demonstrated satisfactory performance of the system components, including an electromagnetic pump, lithium jet target, and vacuum system. Data on materials corrosion and behavior of lithium impurities are also presented. (author)

Utiliza????o do mapa pedol??gico na caracteriza????o geot??cnica da Aris Mestre D`Armas em Planaltina ??? DF

OpenAIRE

Paranhos, Haroldo; Farias, Rideci; Silva, Joyce Maria Lucas; Pereira, Paulo Sergio

2016-01-01

O presente trabalho apresenta os resultados dos estudos geot??cnicos realizados na ARIS Metre D???Armas em Planaltina ??? DF, com vistas ?? caracteriza????o geot??cnica dos solos e risco geot??cnico, por meio de levantamento de campo, sondagens SPT, sondagens com penetr??metro de anel e sondagens ?? trado, com coleta de amostras, ensaios de permeabilidade em furos de sondagens e ensaios de caracteriza????o dos solos em laborat??rio. Como ferramenta auxiliar na espacializa????o e defi...

Startup of Experimental Lithium System

International Nuclear Information System (INIS)

McCauley, D.L.

1980-06-01

The Experimental Lithium System (ELS) is designed for full-scale testing of targets and other lithium system components for the Fusion Materials Irradiation Test (FMIT) Facility. The system also serves as a test bed for development of lithium purification and characterization equipment, provides experience in operation of large lithium systems, and helps guide FMIT design

Mitigation of environmental impacts: a study of the companies that compose the Camaçari Industrial Center (PIC

Directory of Open Access Journals (Sweden)

Sonia Maria da Silva Gomes

2016-09-01

Full Text Available The purpose of this research was to map the environmental impacts of mitigation actions demonstrated in the sustainability reporting and financial statements of companies that compose the Camaçari Industrial Center (PIC from 2007 to 2013. Data from the Industrial Development Committee of Camaçari was used to survey the companies. The final sample consisted of 14 companies. Content analysis was used to identify the information contained in these reports, based on the model proposed by Nossa (2002 for measuring environmental impacts. The results showed that the subcategory most mentioned in the sustainability reports was wastefulness. It was found in 430 instances, followed by Recycling (157, CO² (129, Contamination and Land Restoration (122, and Conservation of Natural Resources (108. The wastefulness subcategory was also more present in the financial statements, with 77 instances, followed by Contamination and Land Restoration (49 and Recycling (29. There was also a growing trend of disclosure of environmental liabilities. The evidence indicates that the companies are concerned primarily with the treatment and disposal of their waste (solid, liquid and gaseous. The results are restricted to the period and sample investigated. Further research is suggested to broaden the sample and investigate the relationship between disclosure of environmental mitigation actions related to environmental impacts and the financial performance of companies. Additionally, studies could investigate which factors influence the adoption and dissemination of these actions, in the perception of managers of Brazilian companies.

Target activation and radiological response of ARIES-IFE dry wall chamber

International Nuclear Information System (INIS)

El-Guebaly, L.A.; Henderson, D.L.; Wilson, P.P.H.; Abdou, A.E.

2002-01-01

The choice of target coating and hohlraum wall materials is among the most critical decisions to be made for inertial fusion energy (IFE) designs. Gold and gold/gadolinium have long been considered to be the coating and hohlraum wall materials of choice for direct drive (DD) and indirect drive (ID) targets, respectively, offering high target performance and low beam energy losses. More recently, a variety of other materials have been considered, including W, Pb, Pt, Pd, and Ag for the DD target coating and Au, W, Pb, Hg, Ta, Cs, and Hf for the hohlraum wall of the ID target. The choice of the coating/hohlraum material is a tradeoff between the target design elements such as safety, target physics, economics, etc. We identified the key safety issues and have investigated the neutron-induced irradiation effects of the candidate coating/hohlraum materials using the radiation chamber conditions of the ARIES-IFE dry wall concept. The safety requirements have specific impacts in terms of the coating/hohlraum materials choice

Proyecto de mejora y acondicionamiento como apeadero multimodal de la parcela ARI-T03 y de varios viales en el municipio de San Fernando (Cádiz)

OpenAIRE

Díaz Ramos, Jesús

2014-01-01

El objeto del presente Proyecto es definir las obras necesarias para la correcta ejecución de las obras de mejora y acondicionamiento como apeadero multimodal de la parcela ARI-T03 y de varios viales, en el municipio de San Fernando (Cádiz).

Laser Induced Fluorescence (LIF) Measurements of Neutral (ArI) and singly-ionized (ArII) Argon in a LargeScale Helicon Plasma

Science.gov (United States)

Kelly, R. F.; Fisher, D. M.; Hatch, M. W.; Gilmore, M.; Dwyer, R. H.; Meany, K.; Zhang, Y.; Desjardins, T. R.

2017-10-01

In order to investigate the role of neutral dynamics in helicon discharges in the HelCat (Helicon-Cathode) plasma device at U. New Mexico, a Laser Induced Fluorescence (LIF) system has been developed. The LIF system is based on a >250 mW, tunable diode laser with a tuning range between 680 and 700nm. For neutral Argon, the laser pumps the metastable (2P3/20) 4s level to the (2P1/20) 4p level using 696. 7352 nm light. The fluorescence radiation from decay to the (2P1/20) 4s level at 772. 6333 nm is observed. For singly ionized Argon, the laser pumps the 3s23p4(3 P)3d level to the 3s23p4(3 P)4p level using 686.3162nm light. The fluorescence radiation from the decay to the 3s23p4(3 P)4s level is observed. The system design, and velocity measurements in the axial, azimuthal and radial directions for ArI, and in the axial direction for ArII will be presented. Supported by U.S. National Science Foundation Award 1500423.

Quantum treatment of the Ar-HI photodissociation dynamics

International Nuclear Information System (INIS)

Lopez-Lopez, Sergio; Prosmiti, Rita; Garcia-Vela, Alberto

2004-01-01

A wave packet simulation of the ultraviolet photolysis dynamics of Ar-HI(v=0) is reported. Cluster photodissociation is started from two different initial states, namely, the ground van der Waals (vdW) and the first excited vdW bending state, associated with the Ar-I-H and Ar-H-I isomeric forms of the system, respectively. Formation of Ar-I radical products is investigated over the energy range of the cluster absorption spectrum. It is found that the yield of bound Ar-I radical complexes is typically 90%-100% and 70%-80% for the initial states associated with the Ar-I-H and Ar-H-I isomers, respectively. This result is in agreement with the experimentally observed time-of-flight spectrum of the hydrogen fragment produced after Ar-HI photodissociation. The high Ar-I yield is explained mainly by the small amount of energy available for the radical that is converted into internal energy in the photofragmentation process, which enhances the Ar-I survival probability. Quantum interference effects manifest themselves in structures in the angular distribution of the hydrogen fragment, and in pronounced rainbow patterns in the rotational distributions of the Ar-I radical

Clinical Survival of Rebonded Brackets with Different ARI Scores

Directory of Open Access Journals (Sweden)

Mohammad Hossein Ahangar Atashi

2016-01-01

Full Text Available Introduction: Bracket debonding is one of the most common events in orthodontics. The aim of the present study was to quantitatively compare clinical survival of rebonded brackets with different ARI scores with new brackets rebonding. Materials and Methods: The subjects in the present study consisted of 74 patients with 76 debonded brackets on maxillary first and second premolars. After refreshing the bracket base of the debonded brackets, they were assigned in two groups: group A with 27 brackets of ARI≥4 and group B with 28 brackets of ARI≤2. In 21 cases, new brackets were used (group C. The frequency of the debonding in each rebonded group during treatment was calculated in intervals of 6,12,18 mounths after onset of bracket rebonding . Chi-squared test was used to compare the frequency of debonded brackets. Results: The frequency of debonded brackets was significantly higher in group B (ARI≤2 than those of groups A (ARI≥4 and C (new brackets. The number of debonded brackets were not significantly different between groups A (ARI≥4 and C (new brackets. Conclusion: Rebonding strength of debonded brackets in those that the failure is presented between adhesive and enamel (ARI≥4 could be clinically acceptable with no need to use new brackets.    Key words: dental bonding; orthodontic brackets; prevalence

Experimental Modeling of Dynamic Systems

DEFF Research Database (Denmark)

Knudsen, Morten Haack

2006-01-01

An engineering course, Simulation and Experimental Modeling, has been developed that is based on a method for direct estimation of physical parameters in dynamic systems. Compared with classical system identification, the method appears to be easier to understand, apply, and combine with physical...

Plasma profile and shape optimization for the advanced tokamak power plant, ARIES-AT

International Nuclear Information System (INIS)

Kessel, C.E.; Mau, T.K.; Jardin, S.C.; Najmabadi, F.

2006-01-01

An advanced tokamak plasma configuration is developed based on equilibrium, ideal MHD stability, bootstrap current analysis, vertical stability and control, and poloidal field coil analysis. The plasma boundaries used in the analysis are forced to coincide with the 99% flux surface from the free-boundary equilibrium. Using an accurate bootstrap current model and external current drive profiles from ray tracing calculations in combination with optimized pressure profiles, β N values above 7.0 have been obtained. The minimum current drive requirement is found to lie at a lower β N of 6.0. The external kink mode is stabilized by a tungsten shell located at 0.33 times the minor radius and a feedback system. Plasma shape optimization has led to an elongation of 2.2 and triangularity of 0.9 at the separatrix. Vertical stability could be achieved by a combination of tungsten shells located at 0.33 times the minor radius and feedback control coils located behind the shield. The poloidal field coils were optimized in location and current, providing a maximum coil current of 8.6 MA. These developments have led to a simultaneous reduction in the power plant major radius and toroidal field from those found in a previous study [S.C. Jardin, C.E. Kessel, C.G. Bathke, D.A. Ehst, T.K. Mau, F. Najmabadi, T.W. Petrie, the ARIES Team, Physics basis for a reversed shear tokamak power plant, Fusion Eng. Design 38 (1997) 27

Melhor isso do que nada! Participação e responsabilização na gestão dos riscos do Pólo Petroquímico de Camaçari (BA Better this than nothing! Participation and accountability on risk management of Camaçari Petrochemical Complex, in Bahia State

Directory of Open Access Journals (Sweden)

Ana Licks Almeida Silva

2009-12-01

Full Text Available O objetivo da pesquisa foi analisar o modelo adotado na construção dos conselhos comunitários consultivos. O recorte empírico trata do Conselho Comunitário de Camaçari (BA, primeiro no país e referência para a implantação de outros. Observação participante e dezessete entrevistas foram as principais fontes de dados. O conselho se constitui num sofisticado mecanismo de docilização e responsabilização pela disseminação de uma ideologia organizacional hegemônica e de modos de governança neoliberais.This research intends to analyze the model adopted in the construction of community advisory committees. The empirical object is the Community Advisory Committee of Camaçari Complex (BA, the first one to be set up in the country and that has been used as a reference for the implementation of others. Participant observation and seventeen interviews were the main sources of data. The advisory committee constitutes itself in a sophisticated mechanism of docilization and responsabilization for the spread of an organizational hegemonic ideology and neoliberal modes of governance.

Experimental Autonomous Vehicle Systems

DEFF Research Database (Denmark)

Ravn, Ole; Andersen, Nils Axel

1998-01-01

The paper describes the requirements for and a prototype configuration of a software architecture for control of an experimental autonomous vehicle. The test bed nature of the system is emphasised in the choice of architecture making re-configurability, data logging and extendability simple...

LDPC-coded MIMO optical communication over the atmospheric turbulence channel using Q-ary pulse-position modulation.

Science.gov (United States)

Djordjevic, Ivan B

2007-08-06

We describe a coded power-efficient transmission scheme based on repetition MIMO principle suitable for communication over the atmospheric turbulence channel, and determine its channel capacity. The proposed scheme employs the Q-ary pulse-position modulation. We further study how to approach the channel capacity limits using low-density parity-check (LDPC) codes. Component LDPC codes are designed using the concept of pairwise-balanced designs. Contrary to the several recent publications, bit-error rates and channel capacities are reported assuming non-ideal photodetection. The atmospheric turbulence channel is modeled using the Gamma-Gamma distribution function due to Al-Habash et al. Excellent bit-error rate performance improvement, over uncoded case, is found.

Strategic Management of People in Organizations of Petrochemical Camaçari – Bahia: Reflections on its Strategies for Attracting, Retaining and Professional Development

Directory of Open Access Journals (Sweden)

Nildes Pitombo Leite

2012-12-01

Full Text Available The investigation object of this research, the primary objectives was to identify and analyze what changes made in people management by the petrochemical organizations, from the trajectory of diversification in the Industrial Complex of Camaçari and their reflections into strategies for attraction, retention and professional development, much in line with the justifications, as with the question asked. The subjects involved were directors, managers and / or coordinators HR, minimum 10 and maximum of 32 years, two respondents per organization, totaling twenty-one organizations. This investigation was answered in each category and gradually increased at the junction of them all. The results show that the changes made in managing people in the petrochemical investigated are not, necessarily, computed from the trajectory of diversification: Petrochemical Pole / Industrial Complex of Camaçari. These results suggest that mergers are among the main responsible. However, there is the record that this change in context was beneficial to these organizations promote the output of the comfort zone that were since deploying Pole. It reinforces the premise that such an investigation ends innovative and contributory aspect for: the area of people management, petrochemical industry and the country.

Control systems for experimental physics

International Nuclear Information System (INIS)

Anon.

1988-01-01

At an international conference last year at Villars-sur-Ollon (Switzerland), scientists from all over the world looked at the problems of controlling complex physics installations, including particle accelerators, nuclear reactors, large telescopes and high energy physics detectors. The meeting, organized by the European Physical Society's Interdivisional Group on Experimental Physics Control Systems, EPCS, brought together 180 scientists from the world's leading experimental physics research laboratories, universities and industries

Dust removal system for fusion experimental reactors

International Nuclear Information System (INIS)

Onozuka, M.; Ueda, Y.; Takahashi, K.; Oda, Y.; Seki, Y.; Ueda, S.; Aoki, I.

1995-01-01

Development of a dust removal system using static electricity has been conducted. It is envisioned that the system can collect and transport dust under vacuum. In the system, the dust is charged by dielectric polarization and floated by an electrostatic attraction force that is generated by the DC electric field. The dust is then transported by the electric curtain formed by the three-phase AC electric field. Experimental investigation has been conducted to examine the characteristics of the system. Current research results indicate that the dust removal system using static electricity can be used for fusion experimental reactors

Dust removal system for fusion experimental reactors

Energy Technology Data Exchange (ETDEWEB)

Onozuka, M.; Ueda, Y.; Takahashi, K.; Oda, Y. [Mitsubishi Heavy Industries, Ltd., Yokohama (Japan); Seki, Y.; Ueda, S.; Aoki, I. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan)

1995-12-31

Development of a dust removal system using static electricity has been conducted. It is envisioned that the system can collect and transport dust under vacuum. In the system, the dust is charged by dielectric polarization and floated by an electrostatic attraction force that is generated by the DC electric field. The dust is then transported by the electric curtain formed by the three-phase AC electric field. Experimental investigation has been conducted to examine the characteristics of the system. Current research results indicate that the dust removal system using static electricity can be used for fusion experimental reactors.

"ON ALGEBRAIC DECODING OF Q-ARY REED-MULLER AND PRODUCT REED-SOLOMON CODES"

Energy Technology Data Exchange (ETDEWEB)

SANTHI, NANDAKISHORE [Los Alamos National Laboratory

2007-01-22

We consider a list decoding algorithm recently proposed by Pellikaan-Wu for q-ary Reed-Muller codes RM{sub q}({ell}, m, n) of length n {le} q{sup m} when {ell} {le} q. A simple and easily accessible correctness proof is given which shows that this algorithm achieves a relative error-correction radius of {tau} {le} (1-{radical}{ell}q{sup m-1}/n). This is an improvement over the proof using one-point Algebraic-Geometric decoding method given in. The described algorithm can be adapted to decode product Reed-Solomon codes. We then propose a new low complexity recursive aJgebraic decoding algorithm for product Reed-Solomon codes and Reed-Muller codes. This algorithm achieves a relative error correction radius of {tau} {le} {Pi}{sub i=1}{sup m} (1 - {radical}k{sub i}/q). This algorithm is then proved to outperform the Pellikaan-Wu algorithm in both complexity and error correction radius over a wide range of code rates.

PENDIDIKAN KARAKTER MENURUT K.H. HASYIM ASY’ARI DALAM KITAB ADÂB AL-‘ÂLIM WA AL-MUTA‘ALLIM

OpenAIRE

Sholikah Sholikah

2015-01-01

The article deals with K.H. Hasyim Asy’ari’s thought of character education. The result of the study indicates that according to K.H. Hasyim Asy’ari the characters of teachers and students in his work Adab al-‘Âlim wa al-Muta’allim can be classified into three parts, are mentality or character, which should be possessed by teachers and learners: attempts to be done in order to become characterized teachers and learners, and: teaching strategies employed by educators and learning strategies us...

Error Probability of Binary and -ary Signals with Spatial Diversity in Nakagami- (Hoyt) Fading Channels

OpenAIRE

Duong Trung Q; Shin Hyundong; Hong Een-Kee

2007-01-01

We analyze the exact average symbol error probability (SEP) of binary and -ary signals with spatial diversity in Nakagami- (Hoyt) fading channels. The maximal-ratio combining and orthogonal space-time block coding are considered as diversity techniques for single-input multiple-output and multiple-input multiple-output systems, respectively. We obtain the average SEP in terms of the Lauricella multivariate hypergeometric function . The analysis is verified by comparing with Monte Carlo simu...

A high resolution atlas of gene expression in the domestic sheep (Ovis aries).

Science.gov (United States)

Clark, Emily L; Bush, Stephen J; McCulloch, Mary E B; Farquhar, Iseabail L; Young, Rachel; Lefevre, Lucas; Pridans, Clare; Tsang, Hiu G; Wu, Chunlei; Afrasiabi, Cyrus; Watson, Mick; Whitelaw, C Bruce; Freeman, Tom C; Summers, Kim M; Archibald, Alan L; Hume, David A

2017-09-01

Sheep are a key source of meat, milk and fibre for the global livestock sector, and an important biomedical model. Global analysis of gene expression across multiple tissues has aided genome annotation and supported functional annotation of mammalian genes. We present a large-scale RNA-Seq dataset representing all the major organ systems from adult sheep and from several juvenile, neonatal and prenatal developmental time points. The Ovis aries reference genome (Oar v3.1) includes 27,504 genes (20,921 protein coding), of which 25,350 (19,921 protein coding) had detectable expression in at least one tissue in the sheep gene expression atlas dataset. Network-based cluster analysis of this dataset grouped genes according to their expression pattern. The principle of 'guilt by association' was used to infer the function of uncharacterised genes from their co-expression with genes of known function. We describe the overall transcriptional signatures present in the sheep gene expression atlas and assign those signatures, where possible, to specific cell populations or pathways. The findings are related to innate immunity by focusing on clusters with an immune signature, and to the advantages of cross-breeding by examining the patterns of genes exhibiting the greatest expression differences between purebred and crossbred animals. This high-resolution gene expression atlas for sheep is, to our knowledge, the largest transcriptomic dataset from any livestock species to date. It provides a resource to improve the annotation of the current reference genome for sheep, presenting a model transcriptome for ruminants and insight into gene, cell and tissue function at multiple developmental stages.

Construction of 3.6m ARIES telescope enclosure with eccentric pier at Devasthal, Nainital

Science.gov (United States)

Bangia, Tarun

Space optimized enclosure with eccentric pier for 3.6m ARIES telescope presents construction challenges at the unique observing site of Devasthal, Nainital, India. Enclosure comprises of about 16.5m diameter and 14m high insulated steel framed cylindrical dome rotating on a 14m high stationery dome supporting structure and a 24m × 12m extension structure building for accommodating aluminizing plant and ventilation system etc. Great deal of manual and mechanical excavation was carried out at the rocky site using rock breaking and JCB machines. Foundation bolts for columns of dome supporting structure and extension structure building were grouted after alignment with total station. A 7m diameter hollow cylindrical pier isolated from other structures and 1.85m eccentric with dome center designed due to space limitation at site is being casted for mounting 150 MT mass of the largest 3.6m telescope in the country. A 7m diameter template was fabricated for 3.6m pier top. Most of enclosure components are manufactured and tested in works before assembly/erection at site. Dome drive was tested with dummy loads using VVVF drive with 6 drive and 12 idler wheel assemblies at works to simulate dome weight and smooth operation before erection at site. A 4.2m wide motorized windscreen is being manufactured with a special grade synthetic fabric to withstand wind speed up to 15m/s.

Data Warehousing and Data Quality for a Spatial Decision Support System

National Research Council Canada - National Science Library

Dill, Robert

1997-01-01

.... The Army Reserve Installation Evaluation System (ARIES) integrates a GIS mapping engine and a decision model solver in a flexible environment that leverages operational legacy database information for decision-making...

Monophasic action potentials and activation recovery intervals as measures of ventricular action potential duration: experimental evidence to resolve some controversies

NARCIS (Netherlands)

Coronel, Ruben; de Bakker, Jacques M. T.; Wilms-Schopman, Francien J. G.; Opthof, Tobias; Linnenbank, André C.; Belterman, Charly N.; Janse, Michiel J.

2006-01-01

BACKGROUND: Activation recovery intervals (ARIs) and monophasic action potential (MAP) duration are used as measures of action potential duration in beating hearts. However, controversies exist concerning the correct way to record MAPs or calculate ARIs. We have addressed these issues

Development of the NSRR experimental data bank system, (1)

International Nuclear Information System (INIS)

Ishijima, Kiyomi; Uemura, Mutsumi; Ohnishi, Nobuaki

1981-01-01

To promote collection, arrangement, and utilization of the NSRR experimental data, development of the NSRR experimental data bank system was intended. Fundamental parts of the NSRR experimental data bank system, including the processing program DTBNK, have been completed. Data of the experiments performed so far have been collected and stored. Outline of the processing program and the method of utilization and the present status of the data bank system are discussed. (author)

Safety in the ARIES-III D-3He tokamak reactor design

International Nuclear Information System (INIS)

Herring, J.S.; Dolan, T.J.

1992-01-01

This paper reports on the ARIES-III reactor study, an extensive examination of the viability of a D- 3 He-fueled commercial tokamak powder reactor. Because neutrons are produced only through side reactions (D+D- 3 HE+N; and D+D-T+p followed by D+T- 4 He+n), the reactor has the significant advantages of reduced activation of the first wall and shield, low afterheat and Class A or C low level waste disposal. Since no tritium is required for operation, no lithium-containing breeding blanket is necessary. A ferritic steel shield behind the first wall protects the magnets from gamma and neutron heating and from radiation damage. The authors explored the potential for isotopically tailoring the 4 mm tungsten layer on the divertor in order to reduce the offsite doses should a tungsten aerosol be released from the reactor after an accident. The authors also modeled a loss-of-cooling accident (LOCA) in which the organic coolant was burning in order to estimate the amount of radionuclides released from the first wall. Because the maximum temperature is low, degree C, release fractions are small. The authors analyzed the disposition of the 20 g/day of tritium that is produced by D-D reactions and removed by the vacuum pumps

User's manual of JT-60 experimental data analysis system

International Nuclear Information System (INIS)

Hirayama, Takashi; Morishima, Soichi; Yoshioka, Yuji

2010-02-01

In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is a user's manual of the JT-60 experimental data analysis system. (author)

Grazing by sheep Ovis aries reduces island populations of water voles Arvicola amphibius

Directory of Open Access Journals (Sweden)

Karl Frafjord

2014-12-01

Full Text Available The population of water voles Arvicola amphibius was surveyed on 21 islands in the Solvær archipelago, northern Norway, in August 2012; 11 islands with semi-wild domestic sheep Ovis aries and 10 islands without sheep. Signs from water voles are very easy to detect and were used as a measure of the population (on a scale 0-10, and the numbers of sheep were counted. The ranking of signs on islands with and without sheep was compared, and a significant difference was found. Islands with sheep had, with one exception, only very small and fragmented populations of water voles, the one exception being a fairly large Carex swamp that was not grazed by the sheep and where a moderate-sized population of voles was found. Islands without sheep had much larger populations of water voles, giving a ranking about four times higher. One reason for the devastating effect of sheep on water voles is probably the fact that the sheep are living year-round on these islands with no supplemental food.

DESIGN OF SMALL AUTOMATION WORK CELL SYSTEM DEMONSTRATIONS

International Nuclear Information System (INIS)

TURNER, C.; PEHL, J.

2000-01-01

The introduction of automation systems into many of the facilities dealing with the production, use and disposition of nuclear materials has been an ongoing objective. Many previous attempts have been made, using a variety of monolithic and, in some cases, modular technologies. Many of these attempts were less than successful, owing to the difficulty of the problem, the lack of maturity of the technology, and over optimism about the capabilities of a particular system. Consequently, it is not surprising that suggestions that automation can reduce worker Occupational Radiation Exposure (ORE) levels are often met with skepticism and caution. The development of effective demonstrations of these technologies is of vital importance if automation is to become an acceptable option for nuclear material processing environments. The University of Texas Robotics Research Group (UTRRG) has been pursuing the development of technologies to support modular small automation systems (each of less than 5 degrees-of-freedom) and the design of those systems for more than two decades. Properly designed and implemented, these technologies have a potential to reduce the worker ORE associated with work in nuclear materials processing facilities. Successful development of systems for these applications requires the development of technologies that meet the requirements of the applications. These application requirements form a general set of rules that applicable technologies and approaches need to adhere to, but in and of themselves are generally insufficient for the design of a specific automation system. For the design of an appropriate system, the associated task specifications and relationships need to be defined. These task specifications also provide a means by which appropriate technology demonstrations can be defined. Based on the requirements and specifications of the operations of the Advanced Recovery and Integrated Extraction System (ARIES) pilot line at Los Alamos National

Benefit Analysis of Implementation of Alternative SO2 Quality Standards on Acute Respiratory Syndrome (ARI Incidence Reduction in Indonesia

Directory of Open Access Journals (Sweden)

Muhamad Nizar

2014-12-01

Full Text Available Indonesia Quality Standard (QS for ambient SO2 for 1 hour time average i.e. 900 μg/m3(equivalent to 360μg/m3in24 hour time average regulated in the Government Regulation No. 41 of 1999 is the most loose compared to the ambient SO2 standards of other countries in the world including WHO QS guideline. This QS is not expected to guarantee the protection of public health in Indonesia. Therefore more stringent QS alternative for ambient SO2 is required. This research examines benefit values in public health aspect if Indonesia tightens its ambient SO2 QS. Two alternative QS for SO2 are used i.e196 μg/m3(equivalent to 78μg/m3in24 hour time average referring to U.S. EPA and 750μg/m3(equivalent to 360μg/m3in24 hour time average referring to PUSARPEDAL. First step is to map distribution of SO2 ambient concentrations in Indonesia. The result indicates that Provinces of Jakarta and Banten have exceeded both alternative QS while Provinces of Yogyakarta, West Java, Central Java, East Java, Bali, and North Sumatra only exceed the alternative QS of 196μg/m3. From the public health aspect, by attaining to the alternative QS of 750μg/m3, Jakarta and Banten will reduce incidence of ARI by 95% and 98%. By attaining to the alternative QS of 196μg/m3, East Java, Bali and North Sumatra will reduce the incidence of ARI by 59%, 51%, and 5%.

Acquisition and treatment systems for experimental data

International Nuclear Information System (INIS)

Bouard, E.

1988-01-01

The acquisition and treatment systems for experimental data has been conceived to give a response to experimental requirements in a research reactor such OSIRIS. Its objective is to acquire and treat the ensemble of informations coming from one or many experiences, to archive useful data for an ulterior treatment and to give at the experimentator a tool ensemble for a better track of his experience. Its main characteristics are given in this text [fr

X- and Y-chromosome specific variants of the amelogenin gene allow sex determination in sheep (Ovis aries and European red deer (Cervus elaphus

Directory of Open Access Journals (Sweden)

Brenig B

2005-03-01

Full Text Available Abstract Background Simple and precise methods for sex determination in animals are a pre-requisite for a number of applications in animal production and forensics. However, some of the existing methods depend only on the detection of Y-chromosome specific sequences. Therefore, the abscence of a signal does not necessarily mean that the sample is of female origin, because experimental errors can also lead to negative results. Thus, the detection of Y- and X-chromosome specific sequences is advantageous. Results A novel method for sex identification in mammals (sheep, Ovis aries and European red deer, Cervus elaphus is described, using a polymerase chain reaction (PCR and sequencing of a part of the amelogenin gene. A partial sequence of the amelogenin gene of sheep and red deer was obtained, which exists on both X and Y chromosomes with a deletion region on the Y chromosome. With a specific pair of primers a DNA fragment of different length between the male and female mammal was amplified. Conclusion PCR amplification using the amelogenin gene primers is useful in sex identification of samples from sheep and red deer and can be applied to DNA analysis of micro samples with small amounts of DNA such as hair roots as well as bones or embryo biopsies.

Aspects of Toxoplasma Infection on the Reproductive System of Experimentally Infected Rams (Ovis Aries

Directory of Open Access Journals (Sweden)

Welber Daniel Zanetti Lopes

2009-01-01

Full Text Available Eight reproductive rams with no prior reproductive disease were distributed into three groups of infection with T. gondii: GI, 3 rams, 2.0×105 P strain oocysts; GII, 3 rams, 1.0×106 RH strain tachyzoites; GIII, 2 control rams. Clinical parameters were measured and serological evaluations (IIF were performed. Presence of the parasite in the semen was investigated by PCR and bioassay techniques. The rams presented clinical alterations (hyperthermia and apathy related to toxoplasmosis in both groups infected with Toxoplasma gondii. All the inoculated rams responded to antigenic stimulus, producing antibodies against T. gondii from postinoculation day 5 onwards. In ovine groups I and II, the greatest titers observed were 1 : 4096 and 1 : 8192, respectively. In semen samples collected from these two groups, the presence of T. gondii was detected by bioassay and PCR. This coccidian was isolated (bioassay and PCR in tissue pools (testicles, epididymis, seminal vesicle, and prostrate from two rams infected presenting oocysts and in one presenting tachyzoites.

Fusion reactor systems studies. Progress report for the period November 1, 1996--October 31, 1997, and final report

Energy Technology Data Exchange (ETDEWEB)

El-Guebaly, L.A.; Blanchard, J.P.; Kulcinski, G.L.

1997-08-01

During FY97, the University of Wisconsin Fusion Technology Institute personnel have participated in the ARIES-RS and the ARIES-ST projects. The main areas of effort are: (1) neutronics analysis; (2) shielding of components and personnel; (3) neutron wall loading distribution; (4) radiation damage to in-vessel components; (5) components lifetimes; (6) embrittled materials designs issues; (7) stress and structural analysis; (8) activation, LOCA, and safety analysis; (9) support and fabrication of components; (10) vacuum system; and (11) maintenance. Progress made in these areas are summarized.

Fusion reactor systems studies. Progress report for the period November 1, 1996--October 31, 1997, and final report

International Nuclear Information System (INIS)

El-Guebaly, L.A.; Blanchard, J.P.; Kulcinski, G.L.

1997-08-01

During FY97, the University of Wisconsin Fusion Technology Institute personnel have participated in the ARIES-RS and the ARIES-ST projects. The main areas of effort are: (1) neutronics analysis; (2) shielding of components and personnel; (3) neutron wall loading distribution; (4) radiation damage to in-vessel components; (5) components lifetimes; (6) embrittled materials designs issues; (7) stress and structural analysis; (8) activation, LOCA, and safety analysis; (9) support and fabrication of components; (10) vacuum system; and (11) maintenance. Progress made in these areas are summarized

Proposed experiment to test fundamentally binary theories

Science.gov (United States)

Kleinmann, Matthias; Vértesi, Tamás; Cabello, Adán

2017-09-01

Fundamentally binary theories are nonsignaling theories in which measurements of many outcomes are constructed by selecting from binary measurements. They constitute a sensible alternative to quantum theory and have never been directly falsified by any experiment. Here we show that fundamentally binary theories are experimentally testable with current technology. For that, we identify a feasible Bell-type experiment on pairs of entangled qutrits. In addition, we prove that, for any n , quantum n -ary correlations are not fundamentally (n -1 ) -ary. For that, we introduce a family of inequalities that hold for fundamentally (n -1 ) -ary theories but are violated by quantum n -ary correlations.

Solar-Diesel Hybrid Power System Optimization and Experimental Validation

Science.gov (United States)

Jacobus, Headley Stewart

As of 2008 1.46 billion people, or 22 percent of the World's population, were without electricity. Many of these people live in remote areas where decentralized generation is the only method of electrification. Most mini-grids are powered by diesel generators, but new hybrid power systems are becoming a reliable method to incorporate renewable energy while also reducing total system cost. This thesis quantifies the measurable Operational Costs for an experimental hybrid power system in Sierra Leone. Two software programs, Hybrid2 and HOMER, are used during the system design and subsequent analysis. Experimental data from the installed system is used to validate the two programs and to quantify the savings created by each component within the hybrid system. This thesis bridges the gap between design optimization studies that frequently lack subsequent validation and experimental hybrid system performance studies.

Study of TXRF experimental system by Monte Carlo simulation

International Nuclear Information System (INIS)

Costa, Ana Cristina M.; Leitao, Roberta G.; Lopes, Ricardo T.; Anjos, Marcelino J.; Conti, Claudio C.

2011-01-01

The Total-Reflection X-ray Fluorescence (TXRF) technique offers unique possibilities to study the concentrations of a wide range of trace elements in various types of samples. Besides that, the TXRF technique is widely used to study the trace elements in biological, medical and environmental samples due to its multielemental character as well as simplicity of sample preparation and quantification methods used. In general the TXRF experimental setup is not simple and might require substantial experimental efforts. On the other hand, in recent years, experimental TXRF portable systems have been developed. It has motivated us to develop our own TXRF portable system. In this work we presented a first step in order to optimize a TXRF experimental setup using Monte Carlo simulation by MCNP code. The results found show that the Monte Carlo simulation method can be used to investigate the development of a TXRF experimental system before its assembly. (author)

Emergency reactor cooling systems for the experimental VHTR

International Nuclear Information System (INIS)

Mitake, Susumu; Suzuki, Katsuo; Miyamoto, Yoshiaki; Tamura, Kazuo; Ezaki, Masahiro.

1983-03-01

Performances and design of the panel cooling system which has been proposed to be equipped as an emergency reactor cooling system for the experimental multi purpose very high temperature gas-cooled reactor are explained. Effects of natural circulation flow which would develop in the core and temperature transients of the panel in starting have been precisely investigated. Conditions and procedures for settling accidents with the proposed panel cooling system have been also studied. Based on these studies, it has been shown that the panel cooling system is effective and useful for the emergency reactor cooling of the experimental VHTR. (author)

Toward the ultimate goal of tritium self-sufficiency: Technical issues and requirements imposed on ARIES advanced power plants

International Nuclear Information System (INIS)

El-Guebaly, Laila A.; Malang, Siegfried

2009-01-01

Due to the lack of external tritium sources, all fusion power plants must demonstrate a closed tritium fuel cycle. The tritium breeding ratio (TBR) must exceed unity by a certain margin. The key question is: how large is this margin and how high should the calculated TBR be? The TBR requirement is design and breeder-dependent and evolves with time. At present, the ARIES requirement is 1.1 for the calculated overall TBR of LiPb systems. The Net TBR during plant operation could be around 1.01. The difference accounts for deficiencies in the design elements (nuclear data evaluation, neutronics code validation, and 3D modeling tools). Such a low Net TBR of 1.01 is potentially achievable in advanced designs employing advanced physics and technology. A dedicated R and D effort will reduce the difference between the calculated TBR and Net TBR. A generic breeding issue encountered in all fusion designs is whether any fusion design will over-breed or under-breed during plant operation. To achieve the required Net TBR with sufficient precision, an online control of tritium breeding is highly recommended for all fusion designs. This can easily be achieved for liquid breeders through online adjustment of Li enrichment.

The path from ITER to a power plant - initial results from the ARIES ''Pathways'' program

International Nuclear Information System (INIS)

Najmabadi, F.

2007-01-01

convince power industry to invest in a fusion system, the licensing authority to license such a device, etc Through this approach we have identified many operational and licensing issues which had not previously received sufficient attention. An industrial advisory committee is guiding us through this process. Given the limited resources available for fusion development, it is essential that we develop metrics for distributing resources among R and D issues. We have revisited various ARIES tokamak design and investigated the parameter space available for a fusion power plant and the impact of various constraints. Only by focusing on the final product, one can arrive at a satisfactory metric for prioritizing R and D (e.g., is it more prudent to push for a higher plasma or a high-efficiency blanket?). Of course, the resulting improvement in the attractiveness of the final product, should be judged against additional resources and risk associated with that particular R and D. (orig.)

Control systems: More for experimental physics

Energy Technology Data Exchange (ETDEWEB)

Anon.

1990-03-15

The European Physical Society's Interdivisional Group on Experimental Physics Control Systems (EPCS) ended 1989 on an optimistic note, welcoming its 30th member institution and having substantially enlarged its range of activities.

Experimental Study of a Thermoelectric Generation System

DEFF Research Database (Denmark)

Zhu, Junpeng; Gao, Junling; Chen, Min

2011-01-01

. System-level simulation is carried out using a quasi-one-dimensional numerical model that enables direct comparison with experimental results. The results of both experiment and simulation will provide a foundation to improve and optimize complex thermoelectric generation systems....

Control systems: More for experimental physics

International Nuclear Information System (INIS)

Anon.

1990-01-01

The European Physical Society's Interdivisional Group on Experimental Physics Control Systems (EPCS) ended 1989 on an optimistic note, welcoming its 30th member institution and having substantially enlarged its range of activities.

Design and performance of axes controller for the 50/80 cm ARIES Schmidt telescope

Science.gov (United States)

Kumar, T. S.; Banwar, R. N.

We describe here the details of R.A. and Dec axes controller for the 50/80 cm Schmidt telescope at Aryabhatta Research Institute of observational sciencES (ARIES). Each axis is driven by a set of two motors for backlash-free motion and is coupled to on-shaft encoder for absolute position measurements. Additional incremental encoders are provided though a backlash-free reduction for velocity feedback. A pulse width modulation (PWM) based proportional and integral (PI) controller is designed to drive the twin-motor drive of each axis. The overall telescope control architecture features a distributed network of simple low cost PIC microcontrollers interfaced via CAN bus and RS232 ports. Using this controller it has been observed that the rms velocity errors at slew, set, guide, fine and tracking speeds are negligible. Excessive preload on the gearbox bearings results in a highly nonlinear behavior at fine speeds owing to dynamics of friction. We found that the peak errors in the tracking performance and fine speeds can be improved by properly adjusting the preloads on the gearbox bearings.

Use and management of traditional medicinal plants by Maale and Ari ethnic communities in southern Ethiopia

Science.gov (United States)

2014-01-01

Background Around 80% of the people of Ethiopia are estimated to be relying on medicinal plants for the treatment of different types of human health problems. The purpose of this study was to describe and analyse the use and management of medicinal plants used for the treatment of human health problems by the Maale and Ari communities in southern Ethiopia. Methods Quantitative and qualitative ethnobotanical field inquiries and analytical methods including individual and focus group discussions (18), observations, individual interviews (n = 74), preference ranking and paired comparison were used. Data were collected in three study sites and from two markets; the latter surveyed every 15 days from February 2011 to February 2012. Results A total of 128 medicinal plant species, belonging to 111 genera and 49 families, used as herbal medicine by Maale and Ari communities were documented. Predominantly harvested plant parts were leaves, which are known to have relatively low impact on medicinal plant resources. Species with high familiarity indices included Solanum dasyphyllum, Indigofera spicata, Ruta chalepensis, Plumbago zeylanica and Meyna tetraphylla. Low Jaccards similarity indices (≤ 0.33) indicated little correspondence in medicinal plant use among sites and between ethnic communities. The dominant ways of medicinal plant knowledge acquisition and transfer is vertical: from parents to children through oral means. Gender and site significantly influenced the number of human medicinal plants known currently in the study sites. Age was only a factor of significance in Maale. Marketing of medicinal plants harvested from wild and semi-wild stands is not common. Expansion of agricultural land and lack of cultivation efforts by local communities are mentioned by locals to affect the availability of medicinal plant resources. Conclusion S. dasyphyllum, I. spicata, P. zeylanica, M. tetraphylla, and Oxalis radicosa need to be considered for phytochemical and

Surface blemish detection from passive imagery using learned fuzzy set concepts

International Nuclear Information System (INIS)

Gurbuz, S.; Carver, A.; Schalkoff, R.

1997-12-01

An image analysis method for real-time surface blemish detection using passive imagery and fuzzy set concepts is described. The method develops an internal knowledge representation for surface blemish characteristics on the basis of experience, thus facilitating autonomous learning based upon positive and negative exemplars. The method incorporates fuzzy set concepts in the learning subsystem and image segmentation algorithms, thereby mimicking human visual perception. This enables a generic solution for color image segmentation. This method has been applied in the development of ARIES (Autonomous Robotic Inspection Experimental System), designed to inspect DOE warehouse waste storage drums for rust. In this project, the ARIES vision system is used to acquire drum surface images under controlled conditions and subsequently perform visual inspection leading to the classification of the drum as acceptable or suspect

Experimental functional realization of attribute grammar system

Directory of Open Access Journals (Sweden)

I. Attali

2002-07-01

Full Text Available In this paper we present an experimental functional realization of attribute grammar(AG system for personal computers. For AG system functioning only Turbo Prolog compiler is required. The system functioning is based on a specially elaborated metalanguage for AG description, universal syntactic and semantic constructors. The AG system provides automatic generation of target compiler (syntax--oriented software using Turbo Prolog as object language.

Performance Analysis of SAC Optical PPM-CDMA System-Based Interference Rejection Technique

Science.gov (United States)

Alsowaidi, N.; Eltaif, Tawfig; Mokhtar, M. R.

2016-03-01

In this paper, we aim to theoretically analyse optical code division multiple access (OCDMA) system that based on successive interference cancellation (SIC) using pulse position modulation (PPM), considering the interference between the users, imperfection cancellation occurred during the cancellation process and receiver noises. Spectral amplitude coding (SAC) scheme is used to suppress the overlapping between the users and reduce the receiver noises effect. The theoretical analysis of the multiple access interference (MAI)-limited performance of this approach indicates the influence of the size of M-ary PPM on OCDMA system. The OCDMA system performance improves with increasing M-ary PPM. Therefore, it was found that the SIC/SAC-OCDMA system using PPM technique along with modified prime (MPR) codes used as signature sequence code offers significant improvement over the one without cancellation and it can support up to 103 users at the benchmarking value of bit error rate (BER) = 10-9 with prime number p = 11 while the system without cancellation scheme can support only up to 52 users.

Mannheimia haemolytica serotype A1 exhibits differential pathogenicity in two related species, Ovis canadensis and Ovis aries.

Science.gov (United States)

Dassanayake, Rohana P; Shanthalingam, Sudarvili; Herndon, Caroline N; Lawrence, Paulraj K; Frances Cassirer, E; Potter, Kathleen A; Foreyt, William J; Clinkenbeard, Kenneth D; Srikumaran, Subramaniam

2009-02-02

Mannheimia haemolytica causes pneumonia in both bighorn sheep (BHS, Ovis canadensis) and domestic sheep (DS, Ovis aries). Under experimental conditions, co-pasturing of BHS and DS results in fatal pneumonia in BHS. It is conceivable that certain serotypes of M. haemolytica carried by DS are non-pathogenic to them, but lethal for BHS. M. haemolytica serotypes A1 and A2 are carried by DS in the nasopharynx. However, it is the serotype A2 that predominantly causes pneumonia in DS. The objectives of this study were to determine whether serotype A1 exhibits differential pathogenicity to BHS and DS, and to determine whether leukotoxin (Lkt) secreted by this organism is its primary virulence factor. Three groups each of BHS and DS were intra-tracheally administered either 1 x 10(9)cfu of serotype A1 wild-type (lktA-Wt group), Lkt-deletion mutant of serotype A1-(lktA-Mt group), or saline (control group), respectively. In the lktA-Wt groups, all four BHS died within 48h while none of the DS died during the 2-week study period. In the lktA-Mt groups, none of the BHS or DS died. In the control groups, one DS died due to an unrelated cause. Necropsy and histopathological findings revealed that death of BHS in the lktA-Wt group was due to bilateral, fibrinohemorrhagic pneumonia. Although the A1-Mt-inoculated BHS were clinically normal, on necropsy, lungs of two BHS showed varying degrees of mild chronic pneumonia. These results indicate that M. haemolytica serotype A1 is non-pathogenic to DS, but highly lethal to BHS, and that Lkt is the primary virulence factor of M. haemolytica.

A comparative study of ketone body metabolism between the camel (Camelus dromedarius) and the sheep (Ovis aries).

Science.gov (United States)

Chandrasena, L G; Emmanuel, B; Hamar, D W; Howard, B R

1979-01-01

1. Plasma levels of beta-hydroxybutyrate (BHB), and acetoacetate (AcAc) have been measured in camels (Camelus dromedarius) and sheep (Ovis aries). The activity of beta-hydroxybutyrate dehydrogenase (BHB-deH2) (E.C. 1.1.1.30) was studied in the rumen epithelium and the liver of these animals. 2. Concentrations of plasma BHB and AcAc in the camel were in respective order 33 and 4 times lower than that of the sheep. The ratios of BHB to AcAc were 0.61 and 4.8 for the camel and sheep, respectively. 3. The activity of BHB-deH2 in the rumen epithelium of the camel and sheep were 7.15 and 66 mumol/hr/g wet wt tissue, respectively. The activity in both species was higher in the rumen epithelium than in the liver.

Temperature, salinity, pressure, and other data from current meter and CTD casts in the NE Atlantic Ocean as part of the Subduction Accelerated Research Initiative (ARI) project, from 1991-05-18 to 1993-06-14 (NODC Accession 9700245)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The overall objective of the Subduction Accelerated Research Initiative (ARI) was to bring together several techniques to address the formation and evolution of...

Experimental evaluation of Arabic OCR systems

Directory of Open Access Journals (Sweden)

Mansoor Alghamdi

2017-11-01

Full Text Available Purpose – The aim of this paper is to experimentally evaluate the effectiveness of the state-of-the-art printed Arabic text recognition systems to determine open areas for future improvements. In addition, this paper proposes a standard protocol with a set of metrics for measuring the effectiveness of Arabic optical character recognition (OCR systems to assist researchers in comparing different Arabic OCR approaches. Design/methodology/approach – This paper describes an experiment to automatically evaluate four well-known Arabic OCR systems using a set of performance metrics. The evaluation experiment is conducted on a publicly available printed Arabic dataset comprising 240 text images with a variety of resolution levels, font types, font styles and font sizes. Findings – The experimental results show that the field of character recognition for printed Arabic still requires further research to reach an efficient text recognition method for Arabic script. Originality/value – To the best of the authors’ knowledge, this is the first work that provides a comprehensive automated evaluation of Arabic OCR systems with respect to the characteristics of Arabic script and, in addition, proposes an evaluation methodology that can be used as a benchmark by researchers and therefore will contribute significantly to the enhancement of the field of Arabic script recognition.

Florística em um hectare de cerrado stricto sensu na ARIE - cerrado Pé-de-Gigante, Santa Rita do Passa Quatro, SP

OpenAIRE

Weiser, Veridiana de Lara; Godoy, Silvana Aparecida Pires de

2001-01-01

Foi realizado um levantamento florístico em um ha de cerrado stricto sensu, na parte norte da ARIE - Cerrado Pé-de-Gigante, Santa Rita do Passa Quatro, São Paulo. Foram coletados 428 espécimes em fase reprodutiva, em vinte e cinco excursões de coleta, durante o período de novembro de 1996 a abril de 1998. A listagem florística obtida apresenta 141 espécies, distribuídas em 109 gêneros e 49 famílias. As famílias mais representativas foram: Leguminosae, Asteraceae, Malpighiaceae e Myrtaceae. A ...

Cost/Benefit Analysis of the Army Education Information System (AREIS)

Science.gov (United States)

1980-11-01

educational and vocational opportunities to civilian life d. improved transition from military life to civilian life . 30 8. Counselor and FSO clerical...Columbia Uiversity , ,-- T. Oliver, L.W., and Day, R.W., October-Novenber 1976 Field Tryout of Officer Career Information and Planning System. ARI Draft

The IPIRG-1 pipe system fracture tests: Experimental results

International Nuclear Information System (INIS)

Scott, P.; Olson, R.J.; Wilkowski, G.M.

1994-01-01

As part of the First International Piping Integrity Research Group (IPIRG-1) program, six dynamic pipe system experiments were conducted. The objective of these experiments was to generate experimental data to assess analysis methodologies for characterizing the fracture behavior of circumferentially cracked pipe in a representative piping system subjected to combined inertial and displacement-controlled stresses. A unique experimental facility was designed and constructed. The pipe system evaluated was an expansion loop with over 30 m (100 feet) of 16-inch nominal diameter Schedule 100 pipe. The experimental facility was equipped with special hardware to ensure that system boundary conditions could be appropriately modeled. The test matrix involved one uncracked and five cracked dynamic pipe system experiments. The uncracked-pipe experiment was conducted to evaluate the piping system damping and natural frequency characteristics. The cracked-pipe experiments were conducted to evaluate the fracture behavior, piping system response, and fracture stability characteristics of five different materials. All cracked-pipe experiments were conducted at PWR conditions. Material characterization efforts provided the tensile and fracture toughness properties of the different pipe materials at various strain rates and temperatures. Key results from the six pipe system experiments and material characterization efforts are presented. Detailed analyses will be published in a companion paper

Development of experimental systems for material sciences under microgravity

Science.gov (United States)

Tanii, Jun; Obi, Shinzo; Kamimiyata, Yotsuo; Ajimine, Akio

1988-01-01

As part of the Space Experiment Program of the Society of Japanese Aerospace Companies, three experimental systems (G452, G453, G454) have been developed for materials science studies under microgravity by the NEC Corporation. These systems are to be flown as Get Away Special payloads for studying the feasibility of producing new materials. Together with the experimental modules carrying the hardware specific to the experiment, the three systems all comprise standard subsystems consisting of a power supply, sequence controller, temperature controller, data recorder, and video recorder.

Operation and management manual of JT-60 experimental data analysis system

International Nuclear Information System (INIS)

Hirayama, Takashi; Morishima, Soichi

2014-03-01

In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is an operation and management manual the JT-60 experimental data analysis system. (author)

Experimental inventory verification system

International Nuclear Information System (INIS)

Steverson, C.A.; Angerman, M.I.

1991-01-01

As Low As Reasonably Achievable (ALARA) goals and Department of Energy (DOE) inventory requirements are frequently in conflict at facilities across the DOE complex. The authors wish, on one hand, to verify the presence of correct amounts of nuclear materials that are in storage or in process; yet on the other hand, we wish to achieve ALARA goals by keeping individual and collective exposures as low as social, technical, economic, practical, and public policy considerations permit. The Experimental Inventory Verification System (EIVSystem) is a computer-based, camera-driven system that utilizes image processing technology to detect change in vault areas. Currently in the test and evaluation phase at Idaho National Engineering Laboratory, this system guards personnel. The EIVSystem continually monitors the vault, providing proof of changed status for objects sorted within the vault. This paper reports that these data could provide the basis for reducing inventory requirements when no change has occurred, thus helping implement ALARA policy; the data will also help describe there target area of an inventory when change has been shown to occur

Experimental system design for the integration of trapped-ion and superconducting qubit systems

Science.gov (United States)

De Motte, D.; Grounds, A. R.; Rehák, M.; Rodriguez Blanco, A.; Lekitsch, B.; Giri, G. S.; Neilinger, P.; Oelsner, G.; Il'ichev, E.; Grajcar, M.; Hensinger, W. K.

2016-12-01

We present a design for the experimental integration of ion trapping and superconducting qubit systems as a step towards the realization of a quantum hybrid system. The scheme addresses two key difficulties in realizing such a system: a combined microfabricated ion trap and superconducting qubit architecture, and the experimental infrastructure to facilitate both technologies. Developing upon work by Kielpinski et al. (Phys Rev Lett 108(13):130504, 2012. doi: 10.1103/PhysRevLett.108.130504), we describe the design, simulation and fabrication process for a microfabricated ion trap capable of coupling an ion to a superconducting microwave LC circuit with a coupling strength in the tens of kHz. We also describe existing difficulties in combining the experimental infrastructure of an ion trapping set-up into a dilution refrigerator with superconducting qubits and present solutions that can be immediately implemented using current technology.

Experimental gingivitis, bacteremia and systemic biomarkers: a randomized clinical trial.

Science.gov (United States)

Kinane, D F; Zhang, P; Benakanakere, M; Singleton, J; Biesbrock, A; Nonnenmacher, C; He, T

2015-12-01

Bacteremia and systemic inflammatory markers are associated with periodontal and systemic diseases and may be linking mechanisms between these conditions. We hypothesized that in the development of gingival inflammation, systemic markers of inflammation and bacteremia would increase. To study the effect of bacteremia on systemic inflammatory markers, we recruited 80 subjects to participate in an experimental gingivitis study. Subjects were stratified based on gender, smoking and the number of bleeding sites and then randomized to one of two groups: control group (n = 40) or experimental gingivitis group (n = 40). Subjects in the control group conducted an oral hygiene regimen: brushing twice daily with a regular sodium fluoride cavity protection dentifrice and a standard manual toothbrush, flossing twice daily, and mouth rinsing with an anti-cavity fluoride rinse once daily. The experimental group stopped brushing and flossing, and used only the fluoride anti-cavity mouth rinse for 21 d. Seventy-nine of 80 subjects were evaluable. One subject in the control group was excluded from the results due to antibiotic use during the study. Our data showed the experimental gingivitis group exhibited a significant (p gingival inflammatory indices relative to baseline and the control group but a decrease in bacteremia and soluble intercellular adhesion molecule-1 levels vs. baseline. Bacteremia was negatively correlated with gingival inflammatory indices and soluble intercellular adhesion molecule-1 levels in the experimental gingivitis group, thus negating our hypothesis. We conclude that there are marked differences in systemic cytokine levels over the course of short-term experimentally induced gingivitis and further conclude that a long-term periodontitis study must be considered to address mechanisms whereby oral diseases may affect systemic diseases. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Conserved Genetic Architecture Underlying Individual Recombination Rate Variation in a Wild Population of Soay Sheep (Ovis aries).

Science.gov (United States)

Johnston, Susan E; Bérénos, Camillo; Slate, Jon; Pemberton, Josephine M

2016-05-01

Meiotic recombination breaks down linkage disequilibrium (LD) and forms new haplotypes, meaning that it is an important driver of diversity in eukaryotic genomes. Understanding the causes of variation in recombination rate is important in interpreting and predicting evolutionary phenomena and in understanding the potential of a population to respond to selection. However, despite attention in model systems, there remains little data on how recombination rate varies at the individual level in natural populations. Here we used extensive pedigree and high-density SNP information in a wild population of Soay sheep (Ovis aries) to investigate the genetic architecture of individual autosomal recombination rates. Individual rates were high relative to other mammal systems and were higher in males than in females (autosomal map lengths of 3748 and 2860 cM, respectively). The heritability of autosomal recombination rate was low but significant in both sexes (h(2) = 0.16 and 0.12 in females and males, respectively). In females, 46.7% of the heritable variation was explained by a subtelomeric region on chromosome 6; a genome-wide association study showed the strongest associations at locus RNF212, with further associations observed at a nearby ∼374-kb region of complete LD containing three additional candidate loci, CPLX1, GAK, and PCGF3 A second region on chromosome 7 containing REC8 and RNF212B explained 26.2% of the heritable variation in recombination rate in both sexes. Comparative analyses with 40 other sheep breeds showed that haplotypes associated with recombination rates are both old and globally distributed. Both regions have been implicated in rate variation in mice, cattle, and humans, suggesting a common genetic architecture of recombination rate variation in mammals. Copyright © 2016 by the Genetics Society of America.

BICM-based cooperative communication systems with relay selection: Constellation and multiplexer design

KAUST Repository

Malik, Muhammad Talha

2014-09-01

We propose a new bit-interleaved coded modulation (BICM)-based cooperative communication system where different BICM modules can be optimized jointly considering the average signal to noise ratios of the direct and the two-hop Rayleigh fading channels. As such, the full benefit of BICM can be exploited in the context of cooperative communication. Our design considers cooperative communication systems with so called max-min relay selection scheme that has no loss in performance in terms of diversity- multiplexing trade off in orthogonal cooperation. The presented numerical results for rate 1/2 convolutional code with 8-ary pulse amplitude modulation equivalently 64-ary quadrature amplitude modulation show that the proposed design can offer gains up to 1.4 dB over the traditional BICM design for a target bit error rate of 10-6. Moreover the results show that the amount of gain depends on the relays\\' positions and increases with the number of relays available for selection.

Experimental study of non-binary LDPC coding for long-haul coherent optical QPSK transmissions.

Science.gov (United States)

Zhang, Shaoliang; Arabaci, Murat; Yaman, Fatih; Djordjevic, Ivan B; Xu, Lei; Wang, Ting; Inada, Yoshihisa; Ogata, Takaaki; Aoki, Yasuhiro

2011-09-26

The performance of rate-0.8 4-ary LDPC code has been studied in a 50 GHz-spaced 40 Gb/s DWDM system with PDM-QPSK modulation. The net effective coding gain of 10 dB is obtained at BER of 10(-6). With the aid of time-interleaving polarization multiplexing and MAP detection, 10,560 km transmission over legacy dispersion managed fiber is achieved without any countable errors. The proposed nonbinary quasi-cyclic LDPC code achieves an uncoded BER threshold at 4×10(-2). Potential issues like phase ambiguity and coding length are also discussed when implementing LDPC in current coherent optical systems. © 2011 Optical Society of America

Experimental consideration for realizing image based visual servo control system

International Nuclear Information System (INIS)

Ishikawa, N.; Suzuki, K.; Fujii, Y.; Usui, H.

1995-01-01

In this study, we consider the experimental aspect of image based visual servo control system. The items considered are the following; 1) Inertial parameter estimation, 2) Focal point estimation, 3) Controller performance for the system with delay. From the experimental result of visual control, it is found that the system is very sensitive to the controller gain because of the computational delay of vision. In order to establish a satisfactory delay compensation, more investigations on controller design are required. (author)

The design status of CSNS experimental control system

International Nuclear Information System (INIS)

Jian Zhuang; Yuanping Chu; Dapeng Jin; Yuqian Liu; Yinhong Zhang; Zhuoyu Zhang; Kejun Zhu; Libin Ding; Lei Hu; Jiajie Li; Yali, Liu

2012-01-01

To meet the increasing demand from user community, China decided to build a world-class spallation neutron source, called CSNS (China Spallation Neutron Source). It can provide users a neutron scattering platform with high flux, wide wavelength range and high efficiency. CSNS construction is expected to start in 2011 and will last 6.5 years. The control system of CSNS is divided into accelerator control system and experimental control system. CSNS Experimental Control System is based on EPICS architecture, offering device operation and device debug interface, communication between devices, environment monitor, machine and personnel protection, interface to accelerator control system, overall system monitor and database service. The control system is divided into 4 parts, such as front control layer, local and global control layer based on EPICS, database and network service and the others. The front control layer is based on YOKOGAWA PLC and other controllers. EPICS includes local and global control layer provides all system control and information exchange. Embedded PLC YOKOGAWA RP61 and others is to be used as communication node between front layer and EPICS. Database service provides system configuration and historical data. From the experience of BESIII, MySQL is an option. The system will be developed in Dongguan, Guangdong province and Beijing. So VPN will be used to help development. Now, total 9 persons are working on this system. (authors)

PROFILE SOCIAL CLASS OF INDIVIDUALS ASSISTED IN A SOCIAL ORGANIZATION IN THE CAMAÇARI-BA CITY

Directory of Open Access Journals (Sweden)

Milene de Andrade Carvalho

2012-04-01

Full Text Available The city of Camaçari-Ba in the Bahia is considered the biggest territory of the region metropolitan area of Salvador-B. This population has presented considerable growth in the Human Development Index (HDI, with magnifying of the life expectancy and industrial cycle. The biggest social organization situated in the city and considered satate reference of social inclusion are develops entailed diverse actions to the participation of the city departments, except on actions to the healt secretariat. This study one is about a research of transverse whose objective was to identify the profile of 227 individuals assisted by social organization Prof. Raimundo Pinheiro, located in the mentioned city. The results had indicated the presence of a predominant age range next to 60 years, the relation between income and scholarity, the high frequency of chronic pain and relation enters the chronic use of drugs, activities of daily life and occupational activities. It is necessary that the activities of the social organization contemplate the logic of the intersectoral and include secretariat of health in its organizational politics.

Experimental overview on small collision systems at the LHC

Energy Technology Data Exchange (ETDEWEB)

Loizides, Constantin

2016-12-15

These conferences proceedings summarize the experimental findings obtained in small collision systems at the LHC, as presented in the special session on “QGP in small systems?” at the Quark Matter 2015 conference.

Equalizer Complexity for 6-LP Mode 112 Gbit/s m-ary DP-QAM Space Division Multiplexed Transmission in Strongly Coupled Few-Mode-Fibers

DEFF Research Database (Denmark)

Asif, Rameez; Ye, Feihong; Morioka, Toshio

2015-01-01

12×12 multiple-input multiple-output (MIMO) adaptive digital signal processing (DSP). Time domain equalization (TDE) is realized to implement the linear adaptive MIMO module that is implemented in blind mode using conventional constant-modulusalgorithm (CMA) for finite impulse response (FIR) adaptive......We have quantified equalizer complexity for transmitting dual-polarized 6-LP modes (LP01, LP11a, LP11b, LP21a, LP21b and LP02) of 112 Gbit/s m-ary QAM (m=4, 16, 32, 64, 256) single carrier signals over 20 km step-index few-mode fiber. The transmitted signals are strongly coupled and recovered using...

Photoacoustic Experimental System to Confirm Infrared Absorption Due to Greenhouse Gases

Science.gov (United States)

Kaneko, Fumitoshi; Monjushiro, Hideaki; Nishiyama, Masayoshi; Kasai, Toshio; Harris, Harold H.

2010-01-01

An experimental system for detecting infrared absorption using the photoacoustic (PA) effect is described. It is aimed for use at high-school level to illustrate the difference in infrared (IR) absorption among the gases contained in the atmosphere in connection with the greenhouse effect. The experimental system can be built with readily…

Experimental results obtained with the simulated cold moderator system. System characteristics and technical issues

CERN Document Server

Aso, T; Hino, R; Kaminaga, M; Kinoshita, H; Takahashi, T

2002-01-01

The Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization have been developing a Mega-Watt scale spallation target system. In the system, neutrons generated in a target are sorted out their energy to the proper values in liquid-hydrogen moderators. Then, the liquid-hydrogen is forced to circulate in order to suppress hydrogen temperature increase. In the operation of moderators, it is very important to establish a safety protection system against emergency shutdown of the accelerator or accidents of the cold moderator system. In order to obtain a technical data for design and safety review of the liquid-hydrogen system, we have fabricated an experimental apparatus simulated the cold moderator system using liquid nitrogen (max. 1.5 MPa, mini. 77 K) instead of liquid hydrogen. The experiments on a controllability of the system were carried out to investigate dynamic characteristics of the system. This report presents the experimental results and technical issues for the co...

Improving the Statistical Modeling of the TRMM Extreme Precipitation Monitoring System

Science.gov (United States)

Demirdjian, L.; Zhou, Y.; Huffman, G. J.

2016-12-01

This project improves upon an existing extreme precipitation monitoring system based on the Tropical Rainfall Measuring Mission (TRMM) daily product (3B42) using new statistical models. The proposed system utilizes a regional modeling approach, where data from similar grid locations are pooled to increase the quality and stability of the resulting model parameter estimates to compensate for the short data record. The regional frequency analysis is divided into two stages. In the first stage, the region defined by the TRMM measurements is partitioned into approximately 27,000 non-overlapping clusters using a recursive k-means clustering scheme. In the second stage, a statistical model is used to characterize the extreme precipitation events occurring in each cluster. Instead of utilizing the block-maxima approach used in the existing system, where annual maxima are fit to the Generalized Extreme Value (GEV) probability distribution at each cluster separately, the present work adopts the peak-over-threshold (POT) method of classifying points as extreme if they exceed a pre-specified threshold. Theoretical considerations motivate the use of the Generalized-Pareto (GP) distribution for fitting threshold exceedances. The fitted parameters can be used to construct simple and intuitive average recurrence interval (ARI) maps which reveal how rare a particular precipitation event is given its spatial location. The new methodology eliminates much of the random noise that was produced by the existing models due to a short data record, producing more reasonable ARI maps when compared with NOAA's long-term Climate Prediction Center (CPC) ground based observations. The resulting ARI maps can be useful for disaster preparation, warning, and management, as well as increased public awareness of the severity of precipitation events. Furthermore, the proposed methodology can be applied to various other extreme climate records.

Synchronised laser chaos communication: statistical investigation of an experimental system

OpenAIRE

Lawrance, Anthony J.; Papamarkou, Theodore; Uchida, Atsushi

2017-01-01

The paper is concerned with analyzing data from an experimental antipodal laser-based chaos shift-keying communication system. Binary messages are embedded in a chaotically behaving laser wave which is transmitted through a fiber-optic cable and are decoded at the receiver using a second laser synchronized with the emitter laser. Instrumentation in the experimental system makes it particularly interesting to be able to empirically analyze both optical noise and synchronization error as well a...

Experimental investigation of the thermal hydraulics in lead bismuth eutectic-helium experimental loop of an accelerator-driven system

Energy Technology Data Exchange (ETDEWEB)

Xi, Wenxuan; Wang, Yong Wei; Li, Xun Feng; Huai, Xiulan; Cal, Jun [Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing (China)

2016-10-15

The heat transfer characteristics between liquid lead bismuth eutectic (LBE) and helium are of great significance for the two-loop cooling system based on an accelerator-driven system (ADS). This paper presents an experimental study on the resistance characteristics and heat transfer performance in a LBE-helium experimental loop of ADS. Pressure drops in the LBE loop, the main heat transfer, and the coupled heat transfer characteristics between LBE and helium are investigated experimentally. The temperature of LBE has a significant effect on the LBE thermo-physical properties, and is therefore considered in the prediction of pressure drops. The results show that the overall heat transfer coefficient increases with the increasing helium flow rate and the decreasing inlet temperature of helium. Increasing the LBE Reynolds number and LBE inlet temperature promotes the heat transfer performance of main heat transfer and thus the overall heat transfer coefficient. The experimental results give an insight into the flow and heat transfer properties in a LBE-helium heat exchanger and are helpful for the optimization of an ADS system design.

Experimental study of hydronic panels system and its environment

Energy Technology Data Exchange (ETDEWEB)

Diaz, Nestor Fonseca [University of Liege Belgium, Thermodynamics Laboratory, Campus du Sart Tilman, Bat: B49 - P33, B-4000 Liege (Belgium); Universidad Tecnologica de Pereira, Facultad de Ingenieria Mecanica (Colombia)

2011-01-15

An experimental analysis of hydronic cooling or heating ceiling panels coupled to the building is present in this investigation as a part of the commissioning study of this system. Two test chambers are adapted in a way to reproduce the interaction of the system to the building (windows, internal thermal loads distribution, building structure and ventilation). A series of experimental tests were performed in which the main objective is to observe the influence of parameters such as the water mass flow rate, supply water temperature, thermal load distribution, window and ventilation system effects on the hydronic ceiling capacity and comfort conditions. Test results show that the influence of asymmetric surfaces temperatures inside the room, especially the window effect is not negligible. Then, it is clear that the cooling hydronic ceiling must be evaluated coupled to the building systems and structure. (author)

Experimental study of hydronic panels system and its environment

Energy Technology Data Exchange (ETDEWEB)

Fonseca Diaz, Nestor, E-mail: nestorfonseca5@hotmail.co [University of Liege Belgium, Thermodynamics Laboratory, Campus du Sart Tilman, Bat: B49 - P33, B-4000 Liege (Belgium); Universidad Tecnologica de Pereira, Facultad de Ingenieria Mecanica (Colombia)

2011-01-15

An experimental analysis of hydronic cooling or heating ceiling panels coupled to the building is present in this investigation as a part of the commissioning study of this system. Two test chambers are adapted in a way to reproduce the interaction of the system to the building (windows, internal thermal loads distribution, building structure and ventilation). A series of experimental tests were performed in which the main objective is to observe the influence of parameters such as the water mass flow rate, supply water temperature, thermal load distribution, window and ventilation system effects on the hydronic ceiling capacity and comfort conditions. Test results show that the influence of asymmetric surfaces temperatures inside the room, especially the window effect is not negligible. Then, it is clear that the cooling hydronic ceiling must be evaluated coupled to the building systems and structure.

Experimental investigation of system effects in stressed-skin elements

DEFF Research Database (Denmark)

Dela Stang, B.; Isaksson, T.; Hansson, M.

What kind of behaviour can be expected from stressed-skin elements at failure? To answer this question was a primary objective of the experimental investigation presented in this report. Systems of 3 roof units, each made of 5 parallel beams, have been tested for load-carrying capacity and behavi......What kind of behaviour can be expected from stressed-skin elements at failure? To answer this question was a primary objective of the experimental investigation presented in this report. Systems of 3 roof units, each made of 5 parallel beams, have been tested for load-carrying capacity...

Experimental results obtained with the simulated cold moderator system. System characteristics and technical issues

Energy Technology Data Exchange (ETDEWEB)

Aso, Tomokazu; Kaminaga, Masanori; Haga, Katsuhiro; Kinoshita, Hidetaka; Takahashi, Toshio; Hino, Ryutaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-12-01

The Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization have been developing a Mega-Watt scale spallation target system. In the system, neutrons generated in a target are sorted out their energy to the proper values in liquid-hydrogen moderators. Then, the liquid-hydrogen is forced to circulate in order to suppress hydrogen temperature increase. In the operation of moderators, it is very important to establish a safety protection system against emergency shutdown of the accelerator or accidents of the cold moderator system. In order to obtain a technical data for design and safety review of the liquid-hydrogen system, we have fabricated an experimental apparatus simulated the cold moderator system using liquid nitrogen (max. 1.5 MPa, mini. 77 K) instead of liquid hydrogen. The experiments on a controllability of the system were carried out to investigate dynamic characteristics of the system. This report presents the experimental results and technical issues for the construction of a practical liquid-hydrogen moderator system of the Mega-Watt scale target system. (author)

Cable systems for experimental facilities in JAERI TANDEM ACCELERATOR BUILDING

International Nuclear Information System (INIS)

Tukihashi, Yoshihiro; Yoshida, Tadashi; Takekoshi, Eiko

1979-03-01

Measuring cable systems for experimental facilities in JAERI TANDEM ACCELERATOR BUILDING were completed recently. Measures are taken to prevent penetration of noises into the measuring systems. The cable systems are described in detail, including power supplies and grounding for the measuring systems. (author)

Impact of experimentation in thermodynamic studies of some metallic and oxidic systems

Directory of Open Access Journals (Sweden)

Aune R.E.

2002-01-01

Full Text Available The importance of experimentation as an ingredient to CALPHAD assessments is brought out in the present paper and is illustrated in the case of a number of metallic and oxidic systems. Two types of experimental techniques have been used in the present laboratory for thermodynamic studies, and the details are presented. The results obtained together with the assessed phase diagram in the case of a few selected systems are presented. It was shown that careful experimentation has brought new features in the case of carbide systems involving Mn, and a new 4-phase equilibrium in the case of Ni-W-O system. New data with regard to the thermodynamic activities of FeO-containing slag systems and sulphide capacities of multicomponent slags, obtained by gas equilibration method, are also presented. A thermodynamic software, THERMOSLAG© based on the experimental data has been found to be extremely useful by the steel industries is also discussed.

Passive transfer in domestic and bighorn lambs Total IgG in ewe sera and colostrum and serum IgG kinetics in lambs following colostrum ingestion are similar in domestic sheep and bighorn sheep (ovis aries and ovis canadensis)

Science.gov (United States)

Pneumonia is a population-limiting disease of bighorn sheep (BHS; Ovis canadensis) and a recognized disease entity in domestic sheep (DS; Ovis aries) worldwide. Respiratory disease in BHS lambs can persist for years after all-age outbreaks, resulting in suppressed lamb recruitment. It has been sugge...

Theoretical and experimental evaluation of an indirect-fired GAX cycle cooling system

Energy Technology Data Exchange (ETDEWEB)

Gomez, V.H.; Vidal, A. [Posgrado en Ingenieria, Energia, Universidad Nacional Autonoma de Mexico, Privada Xochicalco S/N, Apdo. Postal 34, 62580 Temixco Morelos (Mexico); Best, R.; Garcia-Valladares, O. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Privada Xochicalco S/N, Apdo. Postal 34, 62580 Temixco Morelos (Mexico); Velazquez, N. [Instituto de Ingenieria, Universidad Autonoma de Baja California, Calle de la Normal S/N, Insurgentes Este, 21280 Mexicali, BC (Mexico)

2008-06-15

A theoretical and experimental evaluation of an indirect-fired GAX-Prototype Cooling System (GAX-PCS), using ammonia-water as the working fluid, is presented. The GAX-PCS was designed for a cooling capacity of 10.6 kW (3 tons). A simulation model was developed, calibrated and validated with experimental values in order to predict the performance of the system outside the design parameters. Experimental results were obtained using thermal oil, at temperatures from 180 to 195 C, as heating source. An internal heat recovery in the system of {proportional_to}55% with respect to the total heat supplied in the generator was obtained. Also the performance of the GAX absorption system, integrated to a micro gas turbine (MGT) as a cogeneration system was simulated. Overall efficiencies for the cogeneration system from 29% to 49% were obtained for cooling loads from 5 kW to 20 kW, respectively. With the theoretical and experimental study of the proposed cycle, it is concluded that the GAX-PCS presents potential to compete technically in the Mexican air conditioning market. (author)

Experimental Investigation and Modeling of Integrated Tri-generation Systems

Science.gov (United States)

Cetinkaya, Eda

Energy demand in the world is increasing with population growth and higher living standards. Today, the need for energy requires a focus on renewable sources without abandoning fossil fuels. Efficient use of energy is one of the most important tasks in modern energy systems to achieve. In addition to the energy need, growing environmental concerns are linked with energy is emerged. Multi-purpose energy generation allows a higher efficiency by generating more outputs with the same input in the same system. Tri-generation systems are expected to provide at least three commodities, such as heating, cooling, desalination, storable fuel production and some other useful outputs, in addition to power generation. In this study, an experimental investigation of gasification is presented and two integrated tri-generation systems are proposed. The first integrated tri-generation system (System 1) utilizes solar energy as input and the outputs are power, fresh water and hot water. It consists of four sub-systems, namely solar power tower system, desalination system, Rankine cycle and organic Rankine cycle (ORC). The second integrated tri-generation system (System 2) utilizes coal and biomass as input and the outputs are power, fuel and hot water. It consists of five sub-systems: gasification plant, Brayton cycle, Rankine cycle, Fischer-Tropsch synthesis plant and an organic Rankine cycle (ORC). Experimental investigation includes coal and biomass gasification, where the experimental results of synthesis gas compositions are utilized in the analysis of the second systems. To maximize efficiency, heat losses from the system should be minimized through a recovery system to make the heat a useful commodity for other systems, such as ORCs which can utilize the low-grade heat. In this respect, ORCs are first analyzed for three different configurations in terms of energy and exergy efficiencies altering working fluids to increase the power output. Among two types of coal and one type

Experimental studies of water hammer in propellant feed system of reaction control system

Directory of Open Access Journals (Sweden)

Avanish Kumar

2018-03-01

Full Text Available Water hammer pressure transient produces large dynamic forces which can damage the pipes and other assemblies in the feed line of a reaction control system (RCS. It has led to the failure of pressure transducers monitoring the manifold pressure in the feed line of RCS. Therefore, water hammer studies have been carried out to understand its effect in feed line. Feedline system has been simplified to develop a mathematical model and experiments have been carried out at extensive levels. The mathematical model was developed considering pipe of uniform c/s and moving liquid-gas interface. The experimental studies have been done using water as working medium instead of actual propellant. The studies showed that rate of pressurization have a very critical role on the water hammer amplitude. Sensitivity studies have been also carried out to study the effect of density, friction and initial liquid column length on water hammer amplitude. Keywords: Water hammer, Reaction control system (RCS, Propellant feed system, Experimental study, Testing

Experimental StudyHigh Altitude Forced Convective Cooling of Electromechanical Actuation Systems

Science.gov (United States)

2016-01-01

34 Massachusetts Institute of Technology , 1989. [3] FedBizOps.Gov, " Integrated Vehicle Energy Technology (INVENT) Development Program for the 6th...AFRL-RQ-WP-TR-2016-0043 EXPERIMENTAL STUDY—HIGH ALTITUDE FORCED CONVECTIVE COOLING OF ELECTROMECHANICAL ACTUATION SYSTEMS Evan M. Racine...TITLE AND SUBTITLE EXPERIMENTAL STUDY—HIGH ALTITUDE FORCED CONVECTIVE COOLING OF ELECTROMECHANICAL ACTUATION SYSTEMS 5a. CONTRACT NUMBER In-house

Set membership experimental design for biological systems

Directory of Open Access Journals (Sweden)

Marvel Skylar W

2012-03-01

Full Text Available Abstract Background Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. Results In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. Conclusions The practicability of our approach is illustrated with a case study. This

Design of experimental system for supercritical CO2 fracturing under confining pressure conditions

Science.gov (United States)

Wang, H.; Lu, Q.; Li, X.; Yang, B.; Zheng, Y.; Shi, L.; Shi, X.

2018-03-01

Supercritical CO2 has the characteristics of low viscosity, high diffusion and zero surface tension, and it is considered as a new fluid for non-polluting and non-aqueous fracturing which can be used for shale gas development. Fracturing refers to a method of utilizing the high-pressure fluid to generate fractures in the rock formation so as to improve the oil and gas flow conditions and increase the oil and gas production. In this article, a new type of experimental system for supercritical CO2 fracturing under confining pressure conditions is designed, which is based on characteristics of supercritical CO2, shale reservoir and down-hole environment. The experimental system consists of three sub-systems, including supercritical CO2 generation system, supercritical CO2 fracturing system and data analysis system. It can be used to simulate supercritical CO2 fracturing under geo-stress conditions, thus to study the rock initiation pressure, the formation of the rock fractures, fractured surface morphology and so on. The experimental system has successfully carried out a series of supercritical CO2 fracturing experiments. The experimental results confirm the feasibility of the experimental system and the high efficiency of supercritical CO2 in fracturing tight rocks.

Web based system architecture for long pulse remote experimentation

International Nuclear Information System (INIS)

Heras, E. de las; Lastra, D.; Vega, J.; Castro, R.; Ruiz, M.; Barrera, E.

2010-01-01

Remote experimentation (RE) methods will be essential in next generation fusion devices. Requirements for long pulse RE will be: on-line data visualization, on-line data acquisition processes monitoring and on-line data acquisition systems interactions (start, stop or set-up modifications). Note that these methods are not oriented to real-time control of fusion plant devices. INDRA Sistemas S.A., CIEMAT (Centro de Investigaciones Energeticas Medioambientales y Tecnologicas) and UPM (Universidad Politecnica de Madrid) have designed a specific software architecture for these purposes. The architecture can be supported on the BeansNet platform, whose integration with an application server provides an adequate solution to the requirements. BeansNet is a JINI based framework developed by INDRA, which makes easy the implementation of a remote experimentation model based on a Service Oriented Architecture. The new software architecture has been designed on the basis of the experience acquired in the development of an upgrade of the TJ-II remote experimentation system.

HISTOPATOLOGIA DE LA INFECCIÓN EXPERIMENTAL DE OVEJAS SIN LANA Ovis aries POR Neospora caninum

Directory of Open Access Journals (Sweden)

Teresa Oviedo

2003-01-01

Full Text Available Ovejas sin lana en diferentes estados reproductivos fueron inoculadas por vía intravenosa con taquizoítos deN. caninum muestra «NC-beef» con el fin de estudiar la patofisiología de la enfermedad en estos animales yverificar la posibilidad de ser usados como modelo experimental de neosporosis bovina. Se utilizaron cincoovejas gestantes (una con 15 días, dos con 30 días, dos con 90 días, tres no gestantes y dos con 10 díasposparto. Los animales eran serologicamente negativos para N.caninum y T. gondii. Dos ovejas gestantes, noinoculadas, fueron utilizadas como control negativo. Los corderos necropsiados, nacidos de ovejas inoculadasantes o durante la gestación presentaron alteraciones histopatológicas en diferentes tejidos, siendo las masseveras observadas en el sistema nervioso central, caracterizadas por la presencia de formas quísticas delparásito asociadas con infiltrado inflamatorio predominantemente mononuclear, áreas de necrosis y en algunoscasos presencia de calcificación. Los corderos nacidos de ovejas inoculadas 10 días después del parto nopresentaron signos clínicos de la enfermedad ni anticuerpos contra o parásito y a la necropsia no presentaronlesiones en ninguno de los tejidos analizados. Un cordero nacido de oveja no inoculada no presentó alteracionesmicroscópicas en ninguno de los tejidos analizados

System design overview of JAXA small supersonic experimental airplane (NEXST-1)

OpenAIRE

Takami, Hikaru; 高見　光

2007-01-01

The system of JAXA small supersonic experimental airplane (NEXST-1: National EXperimental Supersonic Transport-1) has been briefly explained. Some design problems that the designers have encountered have also been briefly explained.

Experimental analyses of dynamical systems involving shape memory alloys

DEFF Research Database (Denmark)

Enemark, Søren; Savi, Marcelo A.; Santos, Ilmar F.

2015-01-01

The use of shape memory alloys (SMAs) in dynamical systems has an increasing importance in engineering especially due to their capacity to provide vibration reductions. In this regard, experimental tests are essential in order to show all potentialities of this kind of systems. In this work, SMA ...

Shear bond strength and debonding characteristics of metal and ceramic brackets bonded with conventional acid-etch and self-etch primer systems: An in-vivo study.

Science.gov (United States)

Mirzakouchaki, Behnam; Shirazi, Sajjad; Sharghi, Reza; Shirazi, Samaneh; Moghimi, Mahsan; Shahrbaf, Shirin

2016-02-01

Different in-vitro studies have reported various results regarding shear bond strength (SBS) of orthodontic brackets when SEP technique is compared to conventional system. This in-vivo study was designed to compare the effect of conventional acid-etching and self-etching primer adhesive (SEP) systems on SBS and debonding characteristics of metal and ceramic orthodontic brackets. 120 intact first maxillary and mandibular premolars of 30 orthodontic patients were selected and bonded with metal and ceramic brackets using conventional acid-etch or self-etch primer system. The bonded brackets were incorporated into the wire during the study period to simulate the real orthodontic treatment condition. The teeth were extracted and debonded after 30 days. The SBS, debonding characteristics and adhesive remnant indices (ARI) were determined in all groups. The mean SBS of metal brackets was 10.63±1.42 MPa in conventional and 9.38±1.53 MPa in SEP system, (P=0.004). No statistically significant difference was noted between conventional and SEP systems in ceramic brackets. The frequency of 1, 2 and 3 ARI scores and debonding within the adhesive were the most common among all groups. No statistically significant difference was observed regarding ARI or failure mode of debonded specimens in different brackets or bonding systems. The SBS of metal brackets bonded using conventional system was significantly higher than SEP system, although the SBS of SEP system was clinically acceptable. No significant difference was found between conventional and SEP systems used with ceramic brackets. Total SBS of metal brackets was significantly higher than ceramic brackets. Due to adequate SBS of SEP system in bonding the metal brackets, it can be used as an alternative for conventional system. Shear bond strength, Orthodontic brackets, Adhesive remnant index, self-etch.

BER of subcarrier MPSK and MDPSK systems in atmospheric turbulence

KAUST Repository

Song, Xuegui

2015-01-01

Bit-error rate (BER) performance of subcarrier $M$-ary phase-shift keying (MPSK) and $M$-ary differential PSK (MDPSK) is analyzed for optical wireless communications over Gamma-Gamma and lognormal turbulence channels. We study the relation between the exact BER and the approximate BER, which is obtained by dividing the symbol-error rate by the number of bits per symbol, for subcarrier MPSK and MDPSK modulations. The asymptotic BER performance gap between the exact and the approximate BERs is quantified analytically through our asymptotic analyses. The accuracy of the approximate BER of both MPSK and MDPSK depends on the channel conditions. Under weak turbulence conditions, the approximate BER expression can be used to predict the system performance with high accuracy, while under strong turbulence conditions the approximate BER becomes inaccurate and can only serve as a loose lower bound of the exact BER. The asymptotic BER performance loss of MDPSK with respect to MPSK is also quantified analytically.

Summary: Experimental validation of real-time fault-tolerant systems

Science.gov (United States)

Iyer, R. K.; Choi, G. S.

1992-01-01

Testing and validation of real-time systems is always difficult to perform since neither the error generation process nor the fault propagation problem is easy to comprehend. There is no better substitute to results based on actual measurements and experimentation. Such results are essential for developing a rational basis for evaluation and validation of real-time systems. However, with physical experimentation, controllability and observability are limited to external instrumentation that can be hooked-up to the system under test. And this process is quite a difficult, if not impossible, task for a complex system. Also, to set up such experiments for measurements, physical hardware must exist. On the other hand, a simulation approach allows flexibility that is unequaled by any other existing method for system evaluation. A simulation methodology for system evaluation was successfully developed and implemented and the environment was demonstrated using existing real-time avionic systems. The research was oriented toward evaluating the impact of permanent and transient faults in aircraft control computers. Results were obtained for the Bendix BDX 930 system and Hamilton Standard EEC131 jet engine controller. The studies showed that simulated fault injection is valuable, in the design stage, to evaluate the susceptibility of computing sytems to different types of failures.

The 30/20 GHz experimental communications satellite system

Science.gov (United States)

Sivo, J. N.

NASA is continuing to pursue an agressive satellite communications technology development program focused on the 30/20 GHz frequency band. A review of the program progress to date is presented. Included is a discussion of the technology program status as well as a description of the experimental system concept under study. Expected system performance characteristics together with spacecraft and payload configuration details including weight and power budget is presented. Overall program schedules of both the technology development and the flight system development are included.

Design and Experimental Study of an Over-Under TBCC Exhaust System.

Science.gov (United States)

Mo, Jianwei; Xu, Jinglei; Zhang, Liuhuan

2014-01-01

Turbine-based combined-cycle (TBCC) propulsion systems have been a topic of research as a means for more efficient flight at supersonic and hypersonic speeds. The present study focuses on the fundamental physics of the complex flow in the TBCC exhaust system during the transition mode as the turbine exhaust is shut off and the ramjet exhaust is increased. A TBCC exhaust system was designed using methods of characteristics (MOC) and subjected to experimental and computational study. The main objectives of the study were: (1) to identify the interactions between the two exhaust jet streams during the transition mode phase and their effects on the whole flow-field structure; (2) to determine and verify the aerodynamic performance of the over-under TBCC exhaust nozzle; and (3) to validate the simulation ability of the computational fluid dynamics (CFD) software according to the experimental conditions. Static pressure taps and Schlieren apparatus were employed to obtain the wall pressure distributions and flow-field structures. Steady-state tests were performed with the ramjet nozzle cowl at six different positions at which the turbine flow path were half closed and fully opened, respectively. Methods of CFD were used to simulate the exhaust flow and they complemented the experimental study by providing greater insight into the details of the flow field and a means of verifying the experimental results. Results indicated that the flow structure was complicated because the two exhaust jet streams interacted with each other during the exhaust system mode transition. The exhaust system thrust coefficient varied from 0.9288 to 0.9657 during the process. The CFD simulation results agree well with the experimental data, which demonstrated that the CFD methods were effective in evaluating the aerodynamic performance of the TBCC exhaust system during the mode transition.

Experimental evaluation of improved dual temperature hydrogen isotopic exchange reaction system

International Nuclear Information System (INIS)

Asakura, Yamato; Uchida, Shunsuke

1984-01-01

A proposed dual temperature hydrogen isotopic exchange reaction system between water and hydrogen gas is evaluated experimentally. The proposed system is composed of low temperature co-current reactors for reaction between water mists and hydrogen gas and high temperature co-current reactors for reaction between water vapor and hydrogen gas. Thus, operation is possible under atmospheric pressure with high reaction efficiency. Using the pilot test system which is composed of ten low temperature (30 0 C) reaction units and ten high temperature (200 0 C) reaction units, an experimental separation of deuterium from light water is carried out. The enrichment factor under steady state conditions, its dependency on operating time, and the reaction period necessary to obtain the steady state enrichment factor are determined experimentally and compared with calculations. It is shown that separation ability in a multistage reaction system can be estimated by numerical calculation using actual reaction efficiency in a unit reactor. (author)

Monitoring system for an experimental facility using GMDH methodology

Energy Technology Data Exchange (ETDEWEB)

Pereira, Iraci Martinez; Moraes, Davi Almeida [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Bueno, Elaine Inacio, E-mail: martinez@ipen.br, E-mail: dmoraes@dk8.com.br, E-mail: ebueno@ifsp.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia de Sao Paulo (IFSP), São Paulo, SP (Brazil)

2017-07-01

This work presents a Monitoring System developed based on the GMDH - Group Method of Data Handling methodology to be used in an Experimental Test Facility. GMDH is a combinatorial multi-layer algorithm in which a network of layers and nodes is generated using a number of inputs from the data stream being evaluated. The GMDH network topology has been traditionally determined using a layer by layer pruning process based on a pre-selected criterion of what constitutes the best nodes at each level. The traditional GMDH method is based on an underlying assumption that the data can be modeled by using an approximation of the Volterra Series or Kolmorgorov-Gabor polynomial. The Fault Test Experimental Facility was designed to simulate a PWR nuclear power plant and is composed by elements that correspond to the pressure vessel, steam generator, pumps of the primary and secondary reactor loops. The nuclear reactor core is represented by an electrical heater with different values of power. The experimental plant will be fully instrumented with sensors and actuators, and the data acquisition system will be constructed in order to enable the details of the temporal analysis of process variables. The Fault Test Experimental Facility can be operated to generate normal and fault data. These failures can be added initially with small magnitude, and their magnitude being increasing gradually in a controlled way. The database will interface with the plant supervisory system SCADA (Supervisory Control and Data Acquisition) that provides the data through standard interface. (author)

Monitoring system for an experimental facility using GMDH methodology

International Nuclear Information System (INIS)

Pereira, Iraci Martinez; Moraes, Davi Almeida; Bueno, Elaine Inacio

2017-01-01

This work presents a Monitoring System developed based on the GMDH - Group Method of Data Handling methodology to be used in an Experimental Test Facility. GMDH is a combinatorial multi-layer algorithm in which a network of layers and nodes is generated using a number of inputs from the data stream being evaluated. The GMDH network topology has been traditionally determined using a layer by layer pruning process based on a pre-selected criterion of what constitutes the best nodes at each level. The traditional GMDH method is based on an underlying assumption that the data can be modeled by using an approximation of the Volterra Series or Kolmorgorov-Gabor polynomial. The Fault Test Experimental Facility was designed to simulate a PWR nuclear power plant and is composed by elements that correspond to the pressure vessel, steam generator, pumps of the primary and secondary reactor loops. The nuclear reactor core is represented by an electrical heater with different values of power. The experimental plant will be fully instrumented with sensors and actuators, and the data acquisition system will be constructed in order to enable the details of the temporal analysis of process variables. The Fault Test Experimental Facility can be operated to generate normal and fault data. These failures can be added initially with small magnitude, and their magnitude being increasing gradually in a controlled way. The database will interface with the plant supervisory system SCADA (Supervisory Control and Data Acquisition) that provides the data through standard interface. (author)

Local and Systemic Inflammatory Responses to Experimentally Induced Gingivitis

Science.gov (United States)

Leishman, Shaneen J.; Seymour, Gregory J.; Ford, Pauline J.

2013-01-01

This study profiled the local and systemic inflammatory responses to experimentally induced gingivitis. Eight females participated in a 21-day experimental gingivitis model followed by a 14-day resolution phase. Bleeding on probing and plaque index scores were assessed before, during, and after resolution of gingival inflammation, and samples of saliva, GCF, and plasma were collected. Samples were assessed for biomarkers of inflammation using the BioPlex platform and ELISA. There were no significant changes in GCF levels of cytokines during the experimental phase; however, individual variability in cytokine profiles was noted. During resolution, mean GCF levels of IL-2, IL-6, and TNF-α decreased and were significantly lower than baseline levels (P = 0.003, P = 0.025, and P = 0.007, resp.). Furthermore, changes in GCF levels of IL-2, IL-6, and TNF-α during resolution correlated with changes in plaque index scores (r = 0.88, P = 0.004; r = 0.72, P = 0.042; r = 0.79, P = 0.019, resp.). Plasma levels of sICAM-1 increased significantly during the experimental phase (P = 0.002) and remained elevated and significantly higher than baseline levels during resolution (P gingivitis adds to the systemic inflammatory burden of an individual. PMID:24227893

Disruptions in large value payment systems: an experimental approach

NARCIS (Netherlands)

Abbink, K.; Bosman, R.; Heijmans, R.; van Winden, F.

2010-01-01

This experimental study investigates the behaviour of banks in a large value payment system. More specifically,we look at 1) the reactions of banks to disruptions in the payment system, 2) the way in which the history of disruptions affects the behaviour of banks (path dependency) and 3) the effect

Disruptions in large value payment systems: An experimental approach

NARCIS (Netherlands)

Abbink, K.; Bosman, R.; Heijmans, R.; van Winden, F.; Hellqvist, M.; Laine, T.

2012-01-01

This experimental study investigates the behaviour of banks in a large value payment system. More specifically, we look at 1) the reactions of banks to disruptions in the payment system, 2) the way in which the history of disruptions affects the behaviour of banks (path dependency) and 3) the effect

Exploiting communication concurrency on high performance computing systems

Energy Technology Data Exchange (ETDEWEB)

Chaimov, Nicholas [Univ. of Oregon, Eugene, OR (United States); Ibrahim, Khaled Z. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Iancu, Costin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-01-01

Although logically available, applications may not exploit enough instantaneous communication concurrency to maximize hardware utilization on HPC systems. This is exacerbated in hybrid programming models such as SPMD+OpenMP. We present the design of a "multi-threaded" runtime able to transparently increase the instantaneous network concurrency and to provide near saturation bandwidth, independent of the application configuration and dynamic behavior. The runtime forwards communication requests from application level tasks to multiple communication servers. Our techniques alleviate the need for spatial and temporal application level message concurrency optimizations. Experimental results show improved message throughput and bandwidth by as much as 150% for 4KB bytes messages on InfiniBand and by as much as 120% for 4KB byte messages on Cray Aries. For more complex operations such as all-to-all collectives, we observe as much as 30% speedup. This translates into 23% speedup on 12,288 cores for a NAS FT implemented using FFTW. We also observe as much as 76% speedup on 1,500 cores for an already optimized UPC+OpenMP geometric multigrid application using hybrid parallelism.

Adaptive Residual Interpolation for Color and Multispectral Image Demosaicking.

Science.gov (United States)

Monno, Yusuke; Kiku, Daisuke; Tanaka, Masayuki; Okutomi, Masatoshi

2017-12-01

Color image demosaicking for the Bayer color filter array is an essential image processing operation for acquiring high-quality color images. Recently, residual interpolation (RI)-based algorithms have demonstrated superior demosaicking performance over conventional color difference interpolation-based algorithms. In this paper, we propose adaptive residual interpolation (ARI) that improves existing RI-based algorithms by adaptively combining two RI-based algorithms and selecting a suitable iteration number at each pixel. These are performed based on a unified criterion that evaluates the validity of an RI-based algorithm. Experimental comparisons using standard color image datasets demonstrate that ARI can improve existing RI-based algorithms by more than 0.6 dB in the color peak signal-to-noise ratio and can outperform state-of-the-art algorithms based on training images. We further extend ARI for a multispectral filter array, in which more than three spectral bands are arrayed, and demonstrate that ARI can achieve state-of-the-art performance also for the task of multispectral image demosaicking.

Experimental systems of integrated and organic wheat production

NARCIS (Netherlands)

Vereijken, P.H.

1989-01-01

The objectives and significance of integrated and organic farming are briefly discussed. In wheat production, the cropping methods involved are then described and compared to those of a conventional system. Initial results from an experimental farm at Nagele, The Netherlands, indicate that by an

Theoretical and Experimental Impact Analysis of Decision Support Systems for Advanced MCR Operators

International Nuclear Information System (INIS)

Lee, Seung Jun; Seong, Poong Hyun

2008-01-01

Human error is recognized as one of the main causes of nuclear power plant (NPP) accidents, and there have been efforts to reduce and prevent human errors by developing various operator support systems. Before adapting these support systems to actual NPPs, it is necessary to validate their reliability and to evaluate their effect on operator performance. Particularly for safety-critical systems such as NPPs, the validation and evaluation of support systems is as important as the design of good systems. Such evaluations may be carried out through a theoretical modelling or experimentation. The objective of this study is to investigate the effects of decision support systems on operator performance by both theoretical and experimental methods. The target system is an integrated decision support system including four decision support sub-systems. In the results of both the theoretical and experimental evaluations, the decision support systems revealed positive effects, and several trends were observed. (authors)

Theoretical and Experimental Impact Analysis of Decision Support Systems for Advanced MCR Operators

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Jun [Korea Atomic Energy Research Institute, 1045 Daedeok-daero, Yuseong-gu, Daejeon, 305-353 (Korea, Republic of); Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Guseong-dong, Yuseong-gu, Daejeon, 305-703 (Korea, Republic of)

2008-07-01

Human error is recognized as one of the main causes of nuclear power plant (NPP) accidents, and there have been efforts to reduce and prevent human errors by developing various operator support systems. Before adapting these support systems to actual NPPs, it is necessary to validate their reliability and to evaluate their effect on operator performance. Particularly for safety-critical systems such as NPPs, the validation and evaluation of support systems is as important as the design of good systems. Such evaluations may be carried out through a theoretical modelling or experimentation. The objective of this study is to investigate the effects of decision support systems on operator performance by both theoretical and experimental methods. The target system is an integrated decision support system including four decision support sub-systems. In the results of both the theoretical and experimental evaluations, the decision support systems revealed positive effects, and several trends were observed. (authors)

Ari Folman’s Waltz With Bashir and the Limits of Abstract Tragedy

Directory of Open Access Journals (Sweden)

Nicholas Hetrick

2010-06-01

Full Text Available

Abstract (E: Drawing on scholarship on film cognition, the essay argues that Ari Folman's animated documentary Waltz with Bashir effectively recreates the process of recovering memories by capitalizing on the way our brains process films, and by thematizing memory. However, the film's limited contextualization of the 1982 Lebanon War and the lives of the soldiers involved and depicted limits Waltz's ability to make an effective antiwar statement. While the film's impact is not limited to viewers with knowledge of the particular politico-military conflict the film represents, it is limited by the nature and extent of its involvement with its subjects' lives before and after the war.