14 CFR 25.1399 - Riding light.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Riding light. 25.1399 Section 25.1399... STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1399 Riding light. (a) Each riding (anchor) light required for a seaplane or amphibian must be installed so that it can— (1) Show a white light for...

Free riding and the provision of candy bars

NARCIS (Netherlands)

Haan, M.A.; Kooreman, P.

A wealth of experimental literature studies the effect of repetition and group size on the extent of free riding in the provision of public goods. In this paper, we use data from honor systems for candy bars in 166 firms to test whether such effects can be found outside the laboratory. We find that

The contribution of attention in virtual moped riding training of teenagers.

Science.gov (United States)

Tagliabue, Mariaelena; Da Pos, Osvaldo; Spoto, Andrea; Vidotto, Giulio

2013-08-01

Riding a moped, like many other everyday activities, is a complex behavior in which attention plays a crucial role. This study aims to investigate the role of attention in enhancing the skills required to ride a moped simulator. Two experiments were conducted with 207 and 60 students (14-15 years old), respectively, using a moped simulator to ride on 12 different tracks. The assignment was to ride safely and avoid hazards. In experiment 1, we divided the hazard scenes of the tracks on the basis of the fact that a shift in attention was required to escape the danger. We showed that during the riding training, when no attentional shift was required, the ability to avoid hazards was constantly higher. In experiment 2, participants were asked to cope with the same basic experimental setting but with an additional attentive task. The results showed that they performed in such a way that not only did the attentive task not impair their performance, but it also produced an improvement in the ability to shift attentional focus, preserving performance efficiency. On the basis of these data, it can be claimed that, primarily, attentional shift plays a prominent role in accounting for accident circumstances. Secondarily, it can be claimed that attentional training contributes to improved processing efficiency so as to prevent mishaps. Copyright © 2013 Elsevier Ltd. All rights reserved.

Behavior and Development: Physical Development--"Riding Along" Outdoors!

Science.gov (United States)

Strickland, Eric

2005-01-01

Riding toys and push-pull toys are traditionally part of every early childhood program. Young children can develop a wide variety of skills and get numerous health benefits from riding toys if one is careful and thoughtful in setting up the riding-toy area. This article describes various types of riding toys and activity ideas to enhance…

[Riding therapy in the rehabilitation of mobility-impaired children].

Science.gov (United States)

Mäenpää, Helena; Kela, Katri; Sätilä, Heli

2016-01-01

Riding therapy is a comprehensive and functional form of rehabilitation, in which the rehabilitee, the horse and the riding therapist collaborate in order to achieve individually assigned goals that support rehabilitation. In Finland, riding therapy is therapeutic rehabilitation carried out by riding therapists who have undergone approved training. The therapy is mainly implemented in an individual form, but small group working is also applied, e.g. in the form of pair therapy and therapeutic vaulting. In Europe, this form of rehabilitation has been divided into hippotherapy supporting motor functions and heilpedagogical riding therapy functioning in support of upbringing.

The directors’ roles in containing the Robben Island Diversity Experience (RIDE

Directory of Open Access Journals (Sweden)

Frans Cilliers

2012-03-01

Research purpose: The purpose of the research was to describe the experiences of the directors of RIDE in the last 10 years. Motivation for the study: Of the many and different diversity events that South African organisations present, RIDE is the only systems psycho-dynamically designed and presented event. This research was an effort to explore the nature of the directors’ roles in working with unconscious diversity dynamics in such a provocative venue. Research design, approach and method: The researchers conducted qualitative, descriptive and double hermeneutic research. The various RIDE events served as case studies. The data consisted of researcher field notes collected during the 10 years. Thematic analysis resulted in four themes, for which the researchers formulated working hypotheses. They integrated them into the research hypothesis. Main findings: Four themes emerged. They were the diversity characteristics of the directors as containers, working on the boundary between RIDE and the macro role players, attacks on the programme as container and challenges from participants. Practical/managerial implications: The research highlighted the important roles of directors’ authorisation as a resilience factor in containing RIDE. Contribution/value-add: The research contributed towards the awareness of intergroup relations between role players during diversity dynamic events and of how authorisation cements relationships.

Practical Secure Transaction for Privacy-Preserving Ride-Hailing Services

Directory of Open Access Journals (Sweden)

Chenglong Cao

2018-01-01

Full Text Available Ride-hailing service solves the issue of taking a taxi difficultly in rush hours. It is changing the way people travel and has had a rapid development in recent years. Since the service is offered over the Internet, there is a great deal of uncertainty about security and privacy. Focusing on the issue, we changed payment pattern of existing systems and designed a privacy protection ride-hailing scheme. E-cash was generated by a new partially blind signature protocol that achieves e-cash unforgeability and passenger privacy. Particularly, in the face of a service platform and a payment platform, a passenger is still anonymous. Additionally, a lightweight hash chain was constructed to keep e-cash divisible and reusable, which increases practicability of transaction systems. The analysis shows that the scheme has small communication and computation costs, and it can be effectively applied in the ride-hailing service with privacy protection.

On-line single server dial-a-ride problems

NARCIS (Netherlands)

Feuerstein, E.; Stougie, L.

1998-01-01

In this paper results on the dial-a-ride problem with a single server are presented. Requests for rides consist of two points in a metric space, a source and a destination. A ride has to be made by the server from the source to the destination. The server travels at unit speed in the metric space

Pricing Decision under Dual-Channel Structure considering Fairness and Free-Riding Behavior

Directory of Open Access Journals (Sweden)

Yongmei Liu

2014-01-01

Full Text Available Under dual-channel structure, the free-riding behavior based on different service levels between online channel and offline channel cannot be avoided, which would lead to channel unfairness. This study implies that the dual-channel supply chain is built up by online channel controlled by manufacturer and traditional channel controlled by retailer, respectively. Under this channel structure, we rebuild the linear demand function considering free-riding behavior and modify the pricing model based on channel fairness. Then the influences of fair factor and free-riding behavior on manufacturer and retailer pricing and performance are discussed. Finally, we propose some numerical analysis to provide some valuable recommendations for manufacturer and retailer improving channel management performance.

The Theory of Dynamic Public Transit Priority with Dynamic Stochastic Park and Ride

Directory of Open Access Journals (Sweden)

Chengming Zhu

2014-01-01

Full Text Available Public transit priority is very important for relieving traffic congestion. The connotation of dynamic public transit priority and dynamic stochastic park and ride is presented. Based on the point that the travel cost of public transit is not higher than the travel cost of car, how to determine the level of dynamic public transit priority is discussed. The traffic organization method of dynamic public transit priority is introduced. For dynamic stochastic park and ride, layout principle, scale, and charging standard are discussed. Traveler acceptability is high through the analysis of questionnaire survey. Dynamic public transit priority with dynamic stochastic park and ride has application feasibility.

Economic analysis of the organisation of a riding centre; application of the linear programming approach

Directory of Open Access Journals (Sweden)

Jaka ŽGAJNAR

2015-12-01

Full Text Available In this contribution, the economics of an equestrian centre, which in addition to a variety of riding school activities also includes breeding and livery, are analysed. We consider the conditions for a hypothetical holding operating in central Slovenia. Methods of mathematical programming are applied in order to attempt to optimise the holding’s activities. Their use may in the given situation facilitate the evaluation of development prospects from different perspectives and indicate the opportunities of increasing value-added. On the basis of maximizing the gross margin, we try to address the various questions and challenges that arise in managing and planning for such an equestrian centre. The obtained results indicate that breeding is unfavourable in the given price-cost ratio, both for the renewal of the working horses herd and for sale. This reflects the current adverse situation in the field of horse breeding. Livery is an important activity on such holdings and through opportunity perspective provides an optimal set of activities. Activities of the riding school for children are interesting in terms of income diversification, as well as an additional source of revenue. A riding school with one riding instructor and an indoor arena needs 4.6 horses in order to cover the costs of full-time employment.

Improvement of Ride Quality of Railway Vehicle by Semiactive Secondary Suspension System on Roller Rig Using Magnetorheological Damper

Directory of Open Access Journals (Sweden)

Yu-Jeong Shin

2014-07-01

Full Text Available Ride quality became a very important factor in the performance of railway vehicles according to the expansion of high-speed railways and speedup of velocity of railway vehicles. In this study, the results of applying the MR (magnetorheological lateral damper on the secondary suspension to reduce the vibration of the car body, directly relating to the ride quality of railway vehicles, were mentioned. In order to verify the control performance of MR dampers, a 1/5 scaled railway vehicle model was constructed, and numerical simulation and experimental tests were conducted. The MR damper for the experimental tests was produced and was attached between the car body and bogie of a full scaled vehicle, and a vibration controlling test was performed to improve ride quality on a roller rig. The skyhook control algorithm was used as the controlling technique, and regarding the test results, the RMS (root mean square value was found by compensating the frequency of the lateral vibration based on the UIC 513 R Standard about the ride quality of railway vehicles. As a result of the test, it could be confirmed that vibration was reduced by approximately 24% when attaching the MR damper between the bogie and the car body compared to when applying a passive damper.

Driving self-regulation and ride service utilization in a multicommunity, multistate sample of U.S. older adults.

Science.gov (United States)

Bird, Donna C; Freund, Katherine; Fortinsky, Richard H; Staplin, Loren; West, Bethany A; Bergen, Gwen; Downs, Jonathan

2017-04-03

This study examined a multicommunity alternative transportation program available 24 hours a day, 7 days a week, for any purpose, offering door-through-door service in private automobiles to members who either do not drive or are transitioning away from driving. Specific aims were to describe the characteristics of members by driving status and ride service usage of these members. Data came from administrative records maintained by a nonprofit ride service program and include 2,661 individuals aged 65+ residing in 14 states who joined the program between April 1, 2010, and November 8, 2013. Latent class analysis was used to group current drivers into 3 classes of driving status of low, medium, and high self-regulation, based on their self-reported avoidance of certain driving situations and weekly driving frequency. Demographics and ride service use rate for rides taken through March 31, 2014, by type of ride (e.g., medical, social, etc.) were calculated for nondrivers and drivers in each driving status class. The majority of ride service users were female (77%) and aged 65-74 years (82%). The primary method of getting around when enrolling for the transportation service was by riding with a friend or family member (60%). Among the 67,883 rides given, nondrivers took the majority (69%) of rides. Medical rides were the most common, accounting for 40% of all rides. Reported ride usage suggests that older adults are willing to use such ride services for a variety of trips when these services are not limited to specific types (e.g., medical). Further research can help tailor strategies to encourage both nondrivers and drivers to make better use of alternative transportation that meets the special needs of older people.

Ride Quality Assessment of Bus Suspension System through Modal Frequency Response Approach

Directory of Open Access Journals (Sweden)

Y. S. Kong

2014-09-01

Full Text Available The ride dynamic characteristics of an urban bus were investigated through simulations with suspension component characteristics and were validated through field measurements. It was performed on highway road at a constant forward speed. A random vibration bus model with two parallel tracks of terrain profile was synthesized with superposition between the left and right sides as well as time delay between front and rear. The bus frequency response model was introduced with embedded modal extraction data to enhance computation efficiency. The simulation results of the bus model were derived in terms of acceleration PSD and frequency-weighted root mean square acceleration along the vertical axes at three locations, namely, driver side, middle, and rear passenger side, to obtain the overall bus ride performance. Another two sets of new leaf spring design were proposed as suspension parameter analysis. The simulation approach provides reasonably good results in evaluating passenger perception on ride and shows that the proposed new spring design can significantly improve the ride quality of the driver and passengers.

The choice of Park & Ride Facilities: an analysis using a context-dependent hierarchical choice experiment

OpenAIRE

Heijden, R.E.C.M. van der; Molin, E.J.E.; Timmermans, H.J.P.

2004-01-01

Park and Ride facilities have been proposed in several countries to alleviate the accessibility problems in cities. Despite growing accessibility problems, these facilities do not seem to attract the expected number of car drivers and are under-used. In an attempt to measure consumer evaluations of the attributes of Park and Ride facilities, a stated choice experiment, based on the method of hierarchical information integration, was conducted in the city of Nijmegen, The Netherlands. This pap...

Feasibility testing for dial-a-ride problems

DEFF Research Database (Denmark)

Haugland, Dag; Ho, Sin C.

Hunsaker and Savelsbergh have proposed an algorithm for testing feasibility of a route in the solution to the dial-a-ride problem. The constraints that are checked are load capacity constraints, time windows, ride time bounds and wait time bounds. The algorithm has linear running time. By virtue...

Feasibility Testing for Dial-a-Ride Problems

DEFF Research Database (Denmark)

Haugland, Dag; Ho, Sin C.

2010-01-01

Hunsaker and Savelsbergh have proposed an algorithm for testing feasibility of a route in the solution to the dial-a-ride problem. The constraints that are checked are load capacity constraints, time windows, ride time bounds and wait time bounds. The algorithm has linear running time. By virtue...

Theoretical and experimental analysis of inverter fed induction motor system under DC link capacitor failure

Directory of Open Access Journals (Sweden)

Hadeed A. Sher

2017-04-01

Full Text Available In this paper theoretical and experimental analysis of an AC–DC–AC inverter under DC link capacitor failure is presented. The failure study conducted for this paper is the open circuit of the DC link capacitor. The presented analysis incorporates the results for both single and three phase AC input. It has been observed that the higher ripple frequency provides better ride through capability for this fault. Furthermore, the effects of this fault on electrical characteristics of AC–DC–AC inverter and mechanical properties of the induction motor are also presented. Moreover, the effect of pulsating torque as a result of an open circuited DC link capacitor is also taken into consideration. Theoretical analysis is supported by computer aided simulation as well as with a real time experimental prototype.

Ride performance of a high speed rail vehicle using controlled semi active suspension system

Science.gov (United States)

Sharma, Sunil Kumar; Kumar, Anil

2017-05-01

The rail-wheel interaction in a rail vehicle running at high speed results in large amplitude vibration of carbody that deteriorates the ride comfort of travellers. The role of suspension system is crucial to provide an acceptable level of ride performance. In this context, an existing rail vehicle is modelled in vertical, pitch and roll motions of carbody and bogies. Additionally, nonlinear stiffness and damping parameters of passive suspension system are defined based on experimental data. In the secondary vertical suspension system, a magneto-rheological (MR) damper is included to improve the ride quality and comfort. The parameters of MR damper depend on the current, amplitude and frequency of excitations. At different running speeds, three semi-active suspension strategies with MR damper are analysed for periodic track irregularity and the resulting performance indices are juxtaposed with the nonlinear passive suspension system. The disturbance rejection and force tracking damper controller algorithms are applied to control the desired force of MR damper. This study reveals that the vertical vibrations of a vehicle can be reduced significantly by using the proposed semi-active suspension strategies. Moreover, it naturally results in improved ride quality and passenger’s comfort in comparison to the existing passive system.

Spine fractures caused by horse riding

OpenAIRE

Siebenga, Jan; Segers, Michiel J. M.; Elzinga, Matthijs J.; Bakker, Fred C.; Haarman, Henk J. T. M.; Patka, Peter

2006-01-01

Study Design: Retrospective study and review of literature. Objectives: Study of demographic data concerning spinal fractures caused by horse riding, classification of fractures according to the AO and Load Sharing classifications, evaluation of mid-term radiological results and long-term functional results. Methods: A review of medical reports and radiological examinations of patients presented to our hospital with horse riding-related spine fractures over a 13-year period; long-term functio...

Radiative inflation and dark energy RIDEs again after BICEP2

International Nuclear Information System (INIS)

Bari, Pasquale Di; King, Stephen F.; Merle, Alexander; Luhn, Christoph; Schmidt-May, Angnis

2014-01-01

Following the ground-breaking measurement of the tensor-to-scalar ratio r=0.20 +0.07 -0.05 by the BICEP2 collaboration, we perform a statistical analysis of a model that combines Radiative Inflation with Dark Energy (RIDE) based on the M 2 |Φ| 2 ln(|Φ| 2 /Λ 2 ) potential and compare its predictions to those based on the traditional chaotic inflation M 2 |Φ| 2 potential. We find a best-fit value in the RIDE model of r=0.18 as compared to r=0.17 in the chaotic model, with the spectral index being n S =0.96 in both models

Braking Control for Improving Ride Comfort

Directory of Open Access Journals (Sweden)

Lee Jonghyup

2018-01-01

Full Text Available While many vehicle control systems focus on vehicle safety and vehicle performance at high speeds, most driving conditions are very low risk situations. In such a driving situation, the ride comfort of the vehicle is the most important performance index of the vehicle. Electro mechanical brake (EMB and other brake-by-wire (BBW systems have been actively researched. As a result, braking actuators in vehicles are more freely controllable, and research on improving ride comfort is also possible. In this study, we develop a control algorithm that dramatically improves ride comfort in low risk braking situations. A method for minimizing the inconvenience of a passenger due to a suddenly changing acceleration at the moment when the vehicle is stopped is presented. For this purpose, an acceleration trajectory is generated that minimizes the discomfort index defined by the change in acceleration, jerk. A controller is also designed to track this trajectory. The algorithm that updates the trajectory is designed considering the error due to the phase lag occurring in the controller and the plant. In order to verify the performance of this controller, simulation verification is completed using a car simulator, Carsim. As a result, it is confirmed that the ride comfort is dramatically improved.

Minimum Makespan Multi-Vehicle Dial-a-Ride

DEFF Research Database (Denmark)

Gørtz, Inge Li; Nagarajan, Viswanath; Ravi, R.

2015-01-01

of multi-vehicle Dial-a-Ride, in which an object may be left at intermediate vertices and transported by more than one vehicle, while being moved from source to destination. Our main results are an O(log(3) n)-approximation algorithm for preemptive multi-vehicle Dial-a-Ride, and an improved O(log t...

PERANCANGAN PURWARUPA KOMIK INTERAKTIF SAFETY RIDING BERKONSEP DIGITAL STORYTELLING

Directory of Open Access Journals (Sweden)

Godham Eko Saputro

2016-12-01

Full Text Available Abstrak Di Indonesia khususnya kota besar, kecelakaan yang disebabkan kendaraan bermotor menjadi persoalan yang serius. Salah satunya disebabkan kurangnya pemahaman tentang safety riding. Berbagai upaya kampanye safety riding pun telah dilaksanakan oleh polisi lalu lintas melalui talkshow, siaran radio, serta media leaflet bagi masyarakat yang dilakukan berulang-ulang. Hal itu mendorong peneliti dalam upaya menemukan strategi baru, salah satunya memanfaatkan perkembangan teknologi yang sangat pesat guna mengembangkan media pendukung kampanye safety riding yang tidak hanya dapat menyampaikan pesan, tetapi juga disukai dan bersifat menghibur. Data diperoleh melalui wawancara, observasi, serta studi literatur sebagai sumber konten purwarupa komik interaktif. Melalui pendekatan digital storytelling dan model komunikasi SMCR serta mengacu pada Penelitian Pengembangan, konsep purwarupa komik interaktif bisa dijabarkan lebih detail serta dapat diimplementasikan dalam perangkat mobile khususnya tablet PC. Diharapkan purwarupa ini dapat dikembangkan lebih lanjut sehingga benar-benar dapat dipublish secara umum sebagai media pendukung kampanye safety riding. Kata Kunci: komik, interaktif, safety riding, digital storytelling Abstract In Indonesia especially in big cities, the accident which caused by rider is still become serious issue. One factor which cause accident is the lack of knowledge about safety riding. A lot of efforts which have been carried by traffic policeman are talkshow, radio broadcast, and leaflet media for public society. On the other hand, it courage the researchers in effort to find new startegy, one of them is using the advance of technology to develop another media campaign which not only can deliver the messages, but also can entertain user. This research is an effort to find unconventional media for safety riding campaign. Data was obtained through interview, observation, and study of literature as sources of content for

Taurine protects DNA of lymphocytes against oxidative alteration in riding horses

DEFF Research Database (Denmark)

Sokól, Janusz Leszek; Sawosz, Ewa; Niemiec, Tomasz

2009-01-01

The study aimed at evaluation the effect of dietary supplement of taurine on the oxidation-reduction status in riding horses, and especially on the extent of oxidative DNA degradation in lymphocytes. Ten Thoroughbred and half-bred geldings aged 6-13 years were classified according to breed...... and amount of work done into two groups - control (C, n=5) and experimental (E, n=5), the latter fed the diet with addition of 40 g taurine/horse/day. Blood samples were withdrawn from the horses' jugular vein before commencing the riding season and then after 30 days of working. In the blood some selected....... The addition of taurine to feed caused smaller oxidative stress, manifested by lower concentration of TBA-RS in plasma and of 8-oxo-dG in lymphocytes. The taurine lowered the lipid peroxidation intensity that occurred in horses due to the oxidative stress caused by physical effort. Furthermore, taurine...

Healthy Ride Trip Data

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A dataset that shows trips taken using the Healthy Ride system by quarter. The dataset includes bike number, membership type, trip start and end timestamp, and...

Pediatric fractures during skateboarding, roller skating, and scooter riding.

Science.gov (United States)

Zalavras, Charalampos; Nikolopoulou, Georgia; Essin, Daniel; Manjra, Nahid; Zionts, Lewis E

2005-04-01

Skateboarding, roller skating, and scooter riding are popular recreational and sporting activities for children and adolescents but can be associated with skeletal injury. The purpose of this study is to describe the frequency and characteristics of fractures resulting from these activities. Fractures from skateboarding, roller skating, and scooter riding compose a considerable proportion of pediatric musculoskeletal injuries. Case series; Level of evidence, 4. Demographic data and injury characteristics were analyzed for all patients who presented to the pediatric fracture clinic of the level I trauma center from January 2001 to May 2002 after sustaining fractures due to skateboarding, roller skating, and scooter riding. Among a total of 2371 fractures, the authors identified 325 fractures (13.7%) that occurred during one of these activities. There were 187 patients (mean age, 13 years; 95% male) who sustained 191 skateboard-related fractures, 64 patients (mean age, 10.8 years; 54% male) who sustained 65 fractures while roller skating, and 66 patients (mean age, 9.7 years; 64% male) who sustained 69 fractures while riding a scooter. The forearm was fractured most often, composing 48.2% of skate-boarding fractures, 63.1% of roller-skating fractures, and 50.7% of fractures due to scooter riding. Of the forearm fractures, 94% were located in the distal third. In the skateboarding group, 10 of 191 (5.2%) fractures were open injuries of the forearm, compared to 6 of 2046 (0.3%) fractures caused by other mechanisms of injury (significant odds ratio, 18.8). Skateboarding, roller-skating, and scooter-riding accidents result in a large proportion of pediatric fractures. An open fracture, especially of the forearm, was more likely to be caused by skateboarding than by other mechanisms of injury. Use of wrist and forearm protective equipment should be considered in all children who ride a skateboard.

ReRide: Performing Lower Back Rehabilitation While Riding Your Motorbike in Traffic

DEFF Research Database (Denmark)

Bagalkot, Naveen; Sokoler, Tomas; Baadkar, Suraj

2016-01-01

controlled mechanically moving display mounted on top of the bike's speedometer that alters the visibility of the speedometer to the rider indicating the correctness of back posture. Informed by embodied perception, the ReRide design emphasizes a rapid coupling between adjusting your back posture...

Never Riding the Tide

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 10. Never Riding the Tide - Seymour Benzer–The Founder of Neurogenetics. K VijayRaghavan Veronica Rodrigues. General Article Volume 13 Issue 10 October 2008 pp 909-915 ...

Examination of a University-Affiliated Safe Ride Program

Science.gov (United States)

Gieck, D. Joseph; Slagle, David M.

2010-01-01

A university-affiliated safe ride program was evaluated to determine whether these programs can reduce drunk-driving related costs. Data was collected from 187 safe ride passengers during three nights of operation. Among the passengers, 93% were enrolled at a local University, 31% were younger than 21, and 40% reported a prior alcohol-related…

Fault Ride Though Control of Photovoltaic Grid-connected Inverter with Current-limited Capability under Offshore Unbalanced Voltage Conditions

DEFF Research Database (Denmark)

Liu, Wenzhao; Guo, Xiaoqiang; Savaghebi, Mehdi

2016-01-01

The photovoltaic (PV) inverter installed on board experiences the excessive current stress in case of the offshore unbalanced voltage fault ride through (FRT), which significantly affects the operation reliability of the power supply system. In order to solve the problem, the inherent mechanism...... of the excessive current phenomenon with the conventional fault ride through control is discussed. The quantitative analysis of the current peak value is conducted and a new current-limiting control strategy is proposed to achieve the flexible power control and successful fault ride through in a safe current...

Low Voltage Ride-Through Capability Solutions for Permanent Magnet Synchronous Wind Generators

Directory of Open Access Journals (Sweden)

Victor F. Mendes

2016-01-01

Full Text Available Due to the increasing number of wind power plants, several countries have modified their grid codes to include specific requirements for the connection of this technology to the power system. One of the requirements is the ride-through fault capability (RTFC, i.e., the system capability to sustain operation during voltage sags. In this sense, the present paper intends to investigate the behavior of a full-converter wind generator with a permanent magnet synchronous machine during symmetrical and asymmetrical voltage sags. Two solutions to improve the low voltage ride-through capability (LVRT of this technology are analyzed: discharging resistors (brake chopper and resonant controllers (RCs. The design and limitations of these solutions and the others proposed in the literature are discussed. Experimental results in a 34 kW test bench, which represents a scaled prototype of a real 2 MW wind conversion system, are presented.

Effect of amusement park rides on programmable shunt valve settings.

Science.gov (United States)

Strahle, Jennifer; Collins, Kelly; Stetler, William R; Smith, Brandon W; Garton, Thomas; Garton, Catherine; Garton, Hugh J L; Maher, Cormac O

2013-01-01

Magnetically programmable shunt valves are susceptible to environmental factors including magnetic fields and accelerative forces. It is unknown if rollercoasters with or without magnetic brakes or linear induction motors (LIMs) are capable of altering the setting of a programmable shunt valve. Two different valve types (type A, n = 10; type B, n = 9) were tested at varying resistance settings in 2 trials on 6 different amusement park rides including 2 rides with LIMs, 2 rides with magnetic brakes, and 2 rides without magnetic technology. The performance level of valve type A and the setting of valve type B changed on rollercoasters with magnets (A = 2.5% [2/80]; B = 5.6% [4/72]) and without magnets (A = 7.5% [3/40]; B = 2.8% [1/36]). Neither valve setting changed when exposed to a Ferris wheel or during ambulation throughout the park. Magnetically programmable valves are susceptible to changes in pressure settings when exposed to amusement park rides with elevated vertical gravitational forces, irrespective of the presence of LIMs or magnetic brakes. © 2013 S. Karger AG, Basel.

Harvesting energy from the counterbalancing (weaving) movement in bicycle riding.

Science.gov (United States)

Yang, Yoonseok; Yeo, Jeongjin; Priya, Shashank

2012-01-01

Bicycles are known to be rich source of kinetic energy, some of which is available for harvesting during speedy and balanced maneuvers by the user. A conventional dynamo attached to the rim can generate a large amount of output power at an expense of extra energy input from the user. However, when applying energy conversion technology to human powered equipments, it is important to minimize the increase in extra muscular activity and to maximize the efficiency of human movements. This study proposes a novel energy harvesting methodology that utilizes lateral oscillation of bicycle frame (weaving) caused by user weight shifting movements in order to increase the pedaling force in uphill riding or during quick speed-up. Based on the 3D motion analysis, we designed and implemented the prototype of an electro-dynamic energy harvester that can be mounted on the bicycle's handlebar to collect energy from the side-to-side movement. The harvester was found to generate substantial electric output power of 6.6 mW from normal road riding. It was able to generate power even during uphill riding which has never been shown with other approaches. Moreover, harvesting of energy from weaving motion seems to increase the economy of cycling by helping efficient usage of human power.

Harvesting Energy from the Counterbalancing (Weaving Movement in Bicycle Riding

Directory of Open Access Journals (Sweden)

Shashank Priya

2012-07-01

Full Text Available Bicycles are known to be rich source of kinetic energy, some of which is available for harvesting during speedy and balanced maneuvers by the user. A conventional dynamo attached to the rim can generate a large amount of output power at an expense of extra energy input from the user. However, when applying energy conversion technology to human powered equipments, it is important to minimize the increase in extra muscular activity and to maximize the efficiency of human movements. This study proposes a novel energy harvesting methodology that utilizes lateral oscillation of bicycle frame (weaving caused by user weight shifting movements in order to increase the pedaling force in uphill riding or during quick speed-up. Based on the 3D motion analysis, we designed and implemented the prototype of an electro-dynamic energy harvester that can be mounted on the bicycle’s handlebar to collect energy from the side-to-side movement. The harvester was found to generate substantial electric output power of 6.6 mW from normal road riding. It was able to generate power even during uphill riding which has never been shown with other approaches. Moreover, harvesting of energy from weaving motion seems to increase the economy of cycling by helping efficient usage of human power.

Analyzing Forces on Amusement Park Rides with Mobile Devices

Science.gov (United States)

Vieyra, Rebecca E.; Vieyra, Chrystian

2014-01-01

Mobile device accelerometers are a simple and easy way for students to collect accurate and detailed data on an amusement park ride. The resulting data can be graphed to assist in the creation of force diagrams to help students explain their physical sensations while on the ride. This type of activity can help students overcome some of the…

Influences of Carbody Vertical Flexibility on Ride Comfort of Railway Vehicles

Directory of Open Access Journals (Sweden)

Dumitriu Mădălina

2017-06-01

Full Text Available The article investigates the influence of the carbody vertical flexibility on the ride comfort of the railway vehicles. The ride comfort is evaluated via the comfort index calculated in three reference points of the carbody. The results of the numerical simulations bring attention to the importance of the carbody symmetrical vertical bending upon the dynamic response of the vehicle, mainly at high velocities. Another conclusion is that the ride comfort can be significantly affected as a function of the symmetrical bending frequency of the carbody. Similarly, there are improvement possibilities for the ride comfort when the best selection of the stiffness in the longitudinal traction system between the carbody and bogie and the vertical suspension damping is made.

Supernetwork approach for modeling traveler response to park-and-ride

NARCIS (Netherlands)

Liao, F.; Arentze, T.A.; Timmermans, H.J.P.

2012-01-01

Park-and-ride has been identified by transport planners as a key element of any sustainability package to promote multimodal trips, improve air quality, and alleviate congestion in urban areas. This paper presents a supernetwork approach that can assess traveler response to park-and-ride in an

Fast Coordinated Control of DFIG Wind Turbine Generators for Low and High Voltage Ride-Through

DEFF Research Database (Denmark)

Wang, Yun; Wu, Qiuwei; Xu, Honghua

2014-01-01

This paper presents a fast coordinated control scheme of the rotor side converter (RSC), the DC chopper and the grid side converter (GSC) of doubly fed induction generator (DFIG) wind turbine generators (WTGs) which is to improve the low voltage ride through (LVRT) and high voltage ride through...... were proposed considering the characteristics of the DFIG WTGs during voltage changes. The fast coordinated control of RSC and GSC were developed based on the characteristic analysis in order to realize efficient LVRT and HVRT of the DFIG WTGs. The proposed fast coordinated control schemes were...

A participatory sensing approach to characterize ride quality

Science.gov (United States)

Bridgelall, Raj

2014-03-01

Rough roads increase vehicle operation and road maintenance costs. Consequently, transportation agencies spend a significant portion of their budgets on ride-quality characterization to forecast maintenance needs. The ubiquity of smartphones and social media, and the emergence of a connected vehicle environment present lucrative opportunities for cost-reduction and continuous, network-wide, ride-quality characterization. However, there is a lack of models to transform inertial and position information from voluminous data flows into indices that transportation agencies currently use. This work expands on theories of the Road Impact Factor introduced in previous research. The index characterizes road roughness by aggregating connected vehicle data and reporting roughness in direct proportion to the International Roughness Index. Their theoretical relationships are developed, and a case study is presented to compare the relative data quality from an inertial profiler and a regular passenger vehicle. Results demonstrate that the approach is a viable alternative to existing models that require substantially more resources and provide less network coverage. One significant benefit of the participatory sensing approach is that transportation agencies can monitor all network facilities continuously to locate distress symptoms, such as frost heaves, that appear and disappear between ride assessment cycles. Another benefit of the approach is continuous monitoring of all high-risk intersections such as rail grade crossings to better understand the relationship between ride-quality and traffic safety.

Scaling Law of Urban Ride Sharing

Science.gov (United States)

Tachet, R.; Sagarra, O.; Santi, P.; Resta, G.; Szell, M.; Strogatz, S. H.; Ratti, C.

2017-03-01

Sharing rides could drastically improve the efficiency of car and taxi transportation. Unleashing such potential, however, requires understanding how urban parameters affect the fraction of individual trips that can be shared, a quantity that we call shareability. Using data on millions of taxi trips in New York City, San Francisco, Singapore, and Vienna, we compute the shareability curves for each city, and find that a natural rescaling collapses them onto a single, universal curve. We explain this scaling law theoretically with a simple model that predicts the potential for ride sharing in any city, using a few basic urban quantities and no adjustable parameters. Accurate extrapolations of this type will help planners, transportation companies, and society at large to shape a sustainable path for urban growth.

Pensionäride probleemid jõuavad Euroopa Komisjoni / Arvo Einre ; interv. Asse Soomets

Index Scriptorium Estoniae

Einre, Arvo, 1931-2012

2005-01-01

Eesti Pensionäride Ühendus sai Euroopa Komisjoni eakate nõukojalt (The European Older People Platform) kutse 31. märtsil Brüsselis toimuvale AGE töökoosolekule, kus käsitletakse pensionäride olukorda EL-i liikmesriikides. Eesti esindajana sõidab üritusele Eesti Pensionäride Ühenduse aseesimees Arvo Einre

Improving Vehicle Ride and Handling Using LQG CNF Fusion Control Strategy for an Active Antiroll Bar System

Directory of Open Access Journals (Sweden)

N. Zulkarnain

2014-01-01

Full Text Available This paper analyses a comparison of performance for an active antiroll bar (ARB system using two types of control strategy. First of all, the LQG control strategy is investigated and then a novel LQG CNF fusion control method is developed to improve the performances on vehicle ride and handling for an active antiroll bar system. However, the ARB system has to balance the trade-off between ride and handling performance, where the CNF consists of a linear feedback law and a nonlinear feedback law. Typically, the linear feedback is designed to yield a quick response at the initial stage, while the nonlinear feedback law is used to smooth out overshoots in the system output when it approaches the target reference. The half car model is combined with a linear single track model with roll dynamics which are used for the analysis and simulation of ride and handling. The performances of the control strategies are compared and the simulation results show the LQG CNF fusion improves the performances in vehicle ride and handling.

Effects of 4 Weeks of Horseback Riding on Anxiety, Depression, and Self-Esteem in Children with Attention Deficit Hyperactivity Disorder

Directory of Open Access Journals (Sweden)

Wi-Young So

2017-09-01

Full Text Available Background and Objective: There is no report on the effects of horseback riding on children with attention deficit hyperactivity disorder (ADHD. Therefore, the purpose of this study was to determine the effects of 4 weeks of horseback riding on anxiety, depression, self-esteem, attention, and learning disorder in children with ADHD. Material and Methods: Subjects comprised a convenience sample of 10 children aged 10-12 years with ADHD and 10 children without ADHD. Horseback riding sessions were performed 2 times (40 minutes/day per week for 4 weeks. Before and after the horseback riding program, we measured the children’s anxiety, depression, self-esteem, attention, and learning disorder. The pre-test and post-test scores were analyzed with repeated-measures analysis of variance. Results: After participating in the 4-week horseback riding program, anxiety (p = 0.013, depression (p = 0.007, attention (p < 0.001, and learning disorder (p < 0.001 were significantly improved in the ADHD group compared to the control group. However, self-esteem was not significantly different between the two groups (p=0.096. Conclusion: These results indicate that the 4-week horseback riding program used in this study was very effective for significantly improving anxiety, depression, and attention in children with ADHD.

Air riding seal with purge cavity

Science.gov (United States)

Sexton, Thomas D; Mills, Jacob A

2017-08-15

An air riding seal for a turbine in a gas turbine engine, where an annular piston is axial moveable within an annular piston chamber formed in a stator of the turbine and forms a seal with a surface on the rotor using pressurized air that forms a cushion in a pocket of the annular piston. A purge cavity is formed on the annular piston and is connected to a purge hole that extends through the annular piston to a lower pressure region around the annular piston or through the rotor to an opposite side. The annular piston is sealed also with inner and outer seals that can be a labyrinth seal to form an additional seal than the cushion of air in the pocket to prevent the face of the air riding seal from overheating.

A qualitative study of gender and work in a British riding school

OpenAIRE

Calamatta, Katherine F G

2012-01-01

This thesis focuses on employees of the horse riding school sector within the United Kingdom. It is based on qualitative fieldwork at two riding schools that took place over the course of three years and asks two questions: why do women numerically dominate within the setting of the riding school? How can we best understand this phenomenon using sociological literature? The subject for this thesis was motivated by my own prior experience as a worker within this industry.\\ud \\ud The thesis wil...

A Comparison Study on the Assessment of Ride Comfort for LRT Passengers

Science.gov (United States)

Tengku Munawir, Tengku Imran; Abqari Abu Samah, Ahmad; Afiq Akmal Rosle, Muhammad; Azlis-Sani, Jalil; Hasnan, Khalid; Sabri, S. M.; Ismail, S. M.; Yunos, Muhammad Nur Annuar Mohd; Yen Bin, Teo

2017-08-01

Ride comfort in railway transportation is very mind boggling and it relies on different dynamic performance criteria as well as subjective observation from the train passengers. Vibration discomfort from different elements such as vehicle condition, track area condition and working condition can prompt poor ride comfort. However, there are no universal applicable standards to analyse the ride comfort. There are several factors including local condition, vehicle condition and the track condition. In this current work, level of ride comfort by previous Adtranz-Walker light rapid transit (LRT) passengers at Ampang line were analysed. A comparison was done via two possible methods which are BS EN 12299 (2009) and Sperling’s Ride Index equation. BS EN 12299 standard is used to measure and evaluate the ride comfort of seating (Nvd) and standing (Nva) of train passenger in three different routes. Next, Sperling’s ride comfort equation is used to conduct validation and comparison between the obtained data. The result indicates a higher extent of vibration in the vertical axis which impacts the overall result. The standing position demonstrates a higher exposure of vibration in all the three tested routes. Comparison of the ride comfort assessment of passenger in sitting and standing position for both methods indicates that all the track sections exceeds “pronounced but not unpleasant (medium)” limit range. Nevertheless, the seating position at track section AU did not exceed the limit and stayed at the comfortable zone. The highest discomfort level achieved for both methods for seating position are 3.34 m/s2 for Nva and 2.63 m/s2 respectively, which is at route C uptrack that is from Chan Sow Lin station to Sri Petaling station. Meanwhile, the highest discomfort level achieved for both methods for standing are 3.80 m/s2 for Nvd and 2.88 m/s2 for Wz respectively, at uptrack section which is from Sri Petaling station to Chan Sow Lin station. Thus, the highest

Flexible fault ride through strategy for wind farm clusters in power systems with high wind power penetration

International Nuclear Information System (INIS)

Wang, Songyan; Chen, Ning; Yu, Daren; Foley, Aoife; Zhu, Lingzhi; Li, Kang; Yu, Jilai

2015-01-01

Highlights: • A flexible fault ride through strategy is proposed. • The strategy comprises of grid code requirements and power restrictions. • Slight faults and moderate faults are the main defending objectives. • Temporary overloading capability of the doubly fed induction generator is considered. - Abstract: This paper investigates a flexible fault ride through strategy for power systems in China with high wind power penetration. The strategy comprises of adaptive fault ride through requirements and maximum power restrictions of the wind farms with weak fault ride through capabilities. The slight faults and moderate faults with high probability are the main defending objective of the strategy. The adaptive fault ride through requirement in the strategy consists of two sub fault ride through requirements, a temporary slight voltage ride through requirement corresponding to a slight fault incident, with a moderate voltage ride through requirement corresponding to a moderate fault. The temporary overloading capability of the wind farm is reflected in both requirements to enhance the capability to defend slight faults and to avoid tripping when the crowbar is disconnected after moderate faults are cleared. For those wind farms that cannot meet the adaptive fault ride through requirement, restrictions are put on the maximum power output. Simulation results show that the flexible fault ride through strategy increases the fault ride through capability of the wind farm clusters and reduces the wind power curtailment during faults

Epidemiological pattern of motorcycle injuries with focus on riding purpose: Experience from a middle-income country

Directory of Open Access Journals (Sweden)

leili Abedi

2015-08-01

Full Text Available Introduction: Road traffic injuries are the eighth leading cause of death worldwide which usually occurs among people aged between15-29 years. In most LAMICs, half of fatal road traffic injuries occur among motorcyclists, which little is known about purpose of riding among motorcycle riders. Objectives: To map out epidemiological aspects of motorcycle traffic injuries with a focus on purpose of riding among victims admitted to referral centers, Tabriz, Iran. Materials/Patients and Methods: A descriptive study was carried out on 200 motorcycle traumatic patients admitted to Shohada and Imam Reza trauma centers in Tabriz((because these two hospitals are referral for trauma in East Azarbyjan Province, Iran from April till November 2013. A questionnaire was filled out through face to face interview for all subjects. Statistical analysis was done using Stata version 11. Results: All subjects were male with mean age of 29 years old. Among injured riders, 70% and 22% of them used helmet and had a riding license, respectively. About 23% of motorcycle riders stated that their main purpose of motorcycle riding was only for fun. Among motorcycle riders who used the motorcycle for fun purposes, the rate of helmet wearing was 43.5% versus 78% among those riding for other purposes (P 0.05; Odd ratio=1. 56, 95% CI: 0. 67-3.4. Crashes have happened more in the summer and during the afternoon times. Conclusion: Motorcyclists who rode motorcycles for fun and amusement, not having rider licenses and helmets wearing were less than other motorcycle riders. Since motorcyclists are mainly young, the rate of risky behavior in this group is higher. Therefore, it is suggested that young motorcycle riders who ride for fun, needs the priority for safety promotion intervention.

The choice of Park & Ride Facilities: an analysis using a context-dependent hierarchical choice experiment

NARCIS (Netherlands)

Heijden, R.E.C.M. van der; Molin, E.J.E.; Timmermans, H.J.P.

2004-01-01

Park and Ride facilities have been proposed in several countries to alleviate the accessibility problems in cities. Despite growing accessibility problems, these facilities do not seem to attract the expected number of car drivers and are under-used. In an attempt to measure consumer evaluations of

The choice of park & ride facilities : an analysis using a context-dependent hierarchical choice experiment

NARCIS (Netherlands)

Bos, D.M.; vd Heijden, R.E.C.M.; Molin, E.J.E.; Timmermans, H.J.P.

2004-01-01

Park and Ride facilities have been proposed in several countries to alleviate the accessibility problems in cities. Despite growing accessibility problems, these facilities do not seem to attract the expected number of car drivers and are under-used. In an attempt to measure consumer evaluations of

Hippotherapy and Therapeutic Riding Highlight!

Science.gov (United States)

Apel, Laura, Comp.

2007-01-01

Horses have always been appreciated by humans for their strength, beauty, and gentle demeanor. Children, especially, have gravitated toward them and many experience their first horseback riding lesson at a young age. However, horses can play a very different role in the lives of children and adults with disabilities. Hippotherapy is physical,…

Benefits of Hippotherapy and Horse Riding Simulation Exercise on Healthy Older Adults: A Systematic Review.

Science.gov (United States)

Hilliere, Camille; Collado-Mateo, Daniel; Villafaina, Santos; Duque-Fonseca, Paulo; Parraça, José A

2018-04-05

To provide an up-to-date research analysis on equine-assisted therapies and horse riding simulation exercise in older adults, and to suggest future directions in clinical practice and research. TYPE: Systematic review. A comprehensive search of studies was performed in 4 electronic databases (Cochrane, PubMed, PEDro, and Web of Science) regarding the effects of equine-assisted therapies and horse riding simulation exercise in older adults. Eight articles were selected, 5 of them focused on hippotherapy, 2 on horse riding simulation, and a single article that used the 2 types of therapy. PRISMA guidelines were followed for the data extraction process. The studies were all randomized controlled trials, but not double-blind, so they were classified as level of evidence B. Duration of hippotherapy programs ranged from 8-12 weeks. Sessions lasted between 15 and 60 minutes and were performed 2-5 times per week. Interventions using a horse simulator spanned 8 weeks and were conducted for 20 minutes 5 times per week. Results indicate that hippotherapy might improve balance, mobility, gait ability, and muscle strength, as well as could induce hormonal and cerebral activity changes in healthy older adults. Benefits of horse riding simulation could be limited to physical fitness and muscular activity. ▪▪▪. Copyright © 2018 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

In-depth investigation of escalator riding accidents in heavy capacity MRT stations.

Science.gov (United States)

Chi, Chia-Fen; Chang, Tin-Chang; Tsou, Chi-Lin

2006-07-01

In 2000, the accident rate for escalator riding was about 0.815 accidents per million passenger trips through Taipei Metro Rapid Transit (MRT) heavy capacity stations. In order to reduce the probability and severity of escalator riding accidents and enhance the safety of passengers, the Drury and Brill model [Drury, C.G., Brill, M., 1983. Human factors in consumer product accident investigation. Hum. Factors 25 (3), 329-342] for in-depth investigation was adopted to analyze the 194 escalator riding accidents in terms of victim, task, product and environment. Prevention measures have been developed based on the major causes of accidents and other related contributing factors. The results from the analysis indicated that the majority of the escalator riding accidents was caused by passengers' carrying out other tasks (38 cases, including carrying luggage 24 cases, looking after accompany persons 9 cases, and 5 others), loss of balance (26 cases, 13.4%), not holding the handrail (20 cases, 10.3%), unhealthy passengers (18 cases, 9.3%), followed by people struck by other passenger (16 cases, 8.2%). For female passengers aged 15-64 years, their rushing for trains accidents could have been prevented by wearing safer footwear or by appropriate signing being provided indicating the location and traveling direction of escalators. Female passengers aged 65 years and above whose accidents were caused by loss of balance, should be encouraged to take the elevator instead. To prevent entrapment injuries, following a stricter design code can be most effective. Further in-depth accident investigation is suggested to cover the activity of the victim prior to the accident, any involved product, the location of the accident on the escalator, any medical treatment, what went wrong, opinion of the respondent on the causes of the accident, and personal characteristics of the passengers. Also, management must trade off productivity and safety appropriately to prevent "Organizational

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

DEFF Research Database (Denmark)

Chen, Wenjie; Xu, Dehong; Zhu, Nan

2016-01-01

The wind turbine system (WTS) is required to ride-through recurring grid faults by the new grid codes. Under single grid faults, the fault ride-through (FRT) strategy with rotor-side crowbar is normally used for the doubly-fed induction generator (DFIG) WTS. However, under recurring faults, larger...... transient current and voltage may be produced, and the DFIG may fail to ride-through the second fault even with the rotor-side crowbar. The crowbar can be active again during the voltage recovery, but large electromagnetic torque (EM-torque) fluctuations will be introduced. The reliability of the mechanical...... system will be influenced. In this paper, an FRT strategy for the DFIG WTS to ride-through recurring symmetrical grid faults is investigated. An improved control strategy is introduced and it is applied during the voltage recovery of the grid faults. The decay of the stator natural flux can...

Sustainable Passenger Transportation: Dynamic Ride-Sharing

NARCIS (Netherlands)

N.A.H. Agatz (Niels); A. Erera (Alan); M.W.P. Savelsbergh (Martin); X. Wang (Xing)

2010-01-01

textabstractRide-share systems, which aim to bring together travelers with similar itineraries and time schedules, may provide significant societal and environmental benefits by reducing the number of cars used for personal travel and improving the utilization of available seat capacity. Effective

"Paul Revere's Ride": Awakening Abolitionists

Science.gov (United States)

Lepore, Jill

2011-01-01

Henry Wadsworth Longfellow used to be both the best-known poet in the English-speaking world and the most beloved, adored by the learned and the lowly alike, read by everyone from Nathaniel Hawthorne and Abraham Lincoln to John Ruskin and Queen Victoria--and, just as avidly, by the queen's servants. "Paul Revere's Ride" is Longfellow's best-known…

Paediatric ride-on mower related injuries and plastic surgical management.

LENUS (Irish Health Repository)

Laing, T A

2011-05-01

Lawnmower related injuries cause significant morbidity in children and young teenagers. The \\'ride-on\\' mowers which are more powerful than the \\'walk behind\\' mowers are becoming increasingly popular. The incidence and severity of injuries from either type of lawnmower appears to be steadily rising as is the burden placed on local plastic surgical and emergency services in managing the care of these patients. The aims of the study were to demonstrate changing trends in lawnmower-related injuries to children presenting to a single unit over a ten-year period and to identify any association between injury severity and machine subtype (\\'ride-on\\' versus \\'walk-behind\\'). Hospital databases, theatre records and medical case notes were reviewed retrospectively of all patients under the age of 16 treated for lawnmower related injuries over a 10 year period from July 1998 to June 2008. Data gathered included patient demographics, injury site and severity, management (type and number of surgical procedures), length of hospital stay and outcome. Injury severity score was also calculated for each case. Controlling for estimated regional population changes, there was a significant increase in the number of ride-on mower related accidents in the time period 2003-2008, compared to the time period 1998-2003. Ride-on injuries had significantly higher injury severity scores, longer hospital stays and were more likely to involve amputations as compared with walk-behind injuries. Children can sustain significant injuries with unsafe lawnmower use. The current study demonstrates the increasing incidence of ride-on mower related injuries in children and identifies a greater morbidity associated with such injuries. Such presentations place intense demands on local plastic surgical services.

Hardness of Preemptive Finite Capacity Dial-a-Ride

DEFF Research Database (Denmark)

Gørtz, Inge Li

2006-01-01

In the Finite Capacity Dial-a-Ride problem the input is a metric space, a set of objects, each specifying a source and a destination, and an integer k---the capacity of the vehicle used for making the deliveries. The goal is to compute a shortest tour for the vehicle in which all objects can...... and Raghavachari [FOCS '98] gave a min{O(log N),O(k)}-approximation algorithm for the preemptive version of the problem. In this paper we show that the preemptive Finite Capacity Dial-a-Ride problem has no $min{O(log^{1/4-\\epsilon}N),k^{1-\\epsilon}}$-approximation algorithm for any $\\epsilon>0$ unless all problems...

Ride Control Systems - Reduced Motions on the Cost of Increased Sectional Forces ?

DEFF Research Database (Denmark)

Folsø, R.; Nielsen, Ulrik Dam; Torti, F.

2003-01-01

Implementation of passive and active ride control systems into both linear frequency and non-linear time domain strip theories is described. The ride control systems considered can consist of T-foils, fins or a combination of these. These appendages are taken into account by considering the lift...

The choice of park and ride facilities : an analysis using a context-dependent hierarchical choice experiment

NARCIS (Netherlands)

Bos, D.M.; vd Heijden, R.E.C.M.; Molin, E.J.E.; Timmermans, H.J.P.

2004-01-01

Park and ride (P & R) facilities have been proposed in several countries to alleviate the accessibility problems in cities. Despite growing accessibility problems, these facilities do not seem to attract the expected number of car drivers and are underused. In an attempt to measure consumer

California Amusement Rides and Liability

Science.gov (United States)

Epstein, Adam

2005-01-01

Twenty-three-year-old Cristina Moreno traveled from Spain to California for her honeymoon in 2000. As part of her visit, she rode the Indiana Jones amusement ride at Disneyland with her new husband. On June 25, 2000, she suffered a brain injury, and she eventually died on September 1, 2000, as a result of injuries allegedly sustained while riding…

Magneto-rheological suspensions for improving ground vehicle's ride comfort, stability, and handling

Science.gov (United States)

Ahmadian, Mehdi

2017-10-01

A state-of-the-art discussion on the applications of magneto-rheological (MR) suspensions for improving ride comfort, handling, and stability in ground vehicles is discussed for both road and rail applications. A historical perspective on the discovery and engineering development of MR fluids is presented, followed by some of the common methods for modelling their non-Newtonian behaviour. The common modes of the MR fluids are discussed, along with the application of the fluid in valve mode for ground vehicles' dampers (or shock absorbers). The applications span across nearly all road vehicles, including automobiles, trains, semi-trucks, motorcycles, and even bicycles. For each type of vehicle, the results of some of the past studies is presented briefly, with reference to the originating study. It is discussed that Past experimental and modelling studies have indicated that MR suspensions provide clear advantages for ground vehicles that far surpasses the performance of passive suspension. For rail vehicles, the primary advantage is in terms of increasing the speed at which the onset of hunting occurs, whereas for road vehicles - mainly automobiles - the performance improvements are in terms of a better balance between vehicle ride, handling, and stability. To further elaborate on this point, a single-suspension model is used to develop an index-based approach for studying the compromise that is offered by vehicle suspensions, using the H2 optimisation approach. Evaluating three indices based on the sprung-mass acceleration, suspension rattlespace, and tyre deflection, it is clearly demonstrated that MR suspensions significantly improve road vehicle's ride comfort, stability, and handling in comparison with passive suspensions. For rail vehicles, the simulation results indicate that using MR suspensions with an on-off switching control can increase the speed at which the on-set of hunting occurs by as much as 50% to more than 300%.

Severe Sunburn After a Hot Air Balloon Ride: A Case Report and Literature Review.

Science.gov (United States)

Ozturk, Sinan; Karagoz, Huseyin

2015-01-01

Hot air balloon tours are very popular among travelers worldwide. Preventable burn injuries associated with hot air balloon rides have been reported during crashes into power lines, in propane burner explosions, and following contact with the propane burner tanks. We present a case of severe repeated sunburn, which poses another risk of preventable injury during hot air balloon rides, and briefly discuss the injury epidemiology of hot air balloon rides. © 2015 International Society of Travel Medicine.

Effects of alcohol on motorcycle riding skills

Science.gov (United States)

2007-12-01

Alcohol is known to disrupt the effect of neurotransmitters and impair various psychomotor skills. Indeed, alcohol intoxication is a significant risk factor for fatal traffic crashes, especially when riding a motorcycle. At present, there is sparse r...

The effect of therapeutic horseback riding on balance in community-dwelling older adults: a pilot study.

Science.gov (United States)

Homnick, Tamara D; Henning, Kim M; Swain, Charlene V; Homnick, Douglas N

2015-02-01

Equine assisted activities (hippotherapy and therapeutic riding) improve balance in patients with disabilities such as cerebral palsy, but have not been systematically studied in older adults, at risk of falls due to balance deficits. We conducted a 10-week, single blind, controlled trial of the effect of a therapeutic horseback riding course on measures of balance in community-dwelling adults 65 years and older. Nine riders and six controls completed the trial. Controls were age matched to riders and all participants were recruited from the local community. Both groups showed improvements in balance during the trial, but did not reach statistical significance. Sample size was small, participants had relatively high initial balance scores, and controls tended to increase their physical activities, likely influencing outcomes. No adverse events occurred and the supervised therapeutic riding program appeared to be a safe and effective form of exercise to improve balance in older adults. A power analysis was performed to estimate numbers of participants needed for a larger study. © The Author(s) 2012.

The Effects of Ride Hailing Services on Travel and Associated Greenhouse Gas Emissions

Science.gov (United States)

2018-04-01

Towards the close of the first decade of the 21st Century, ride-hailing services began to enter the transportation market through smart phone applications that allowed consumers to hail and pay for a ride from drivers using their own vehicle. The inf...

Stay Safe Riding Bikes or Skating Outside

Centers for Disease Control (CDC) Podcasts

2011-02-02

In this podcast for kids, the Kidtastics talk about safety when outside, riding bikes or skating.  Created: 2/2/2011 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 2/2/2011.

On the temperature dependence of H-Uiso in the riding hydrogen model

International Nuclear Information System (INIS)

Lübben, Jens; Volkmann, Christian; Grabowsky, Simon; Edwards, Alison; Morgenroth, Wolfgang; Fabbiani, Francesca P. A.; Sheldrick, George M.; Dittrich, Birger

2014-01-01

The temperature dependence of hydrogen U iso and parent U eq in the riding hydrogen model is investigated by neutron diffraction, aspherical-atom refinements and QM/MM and MO/MO cluster calculations. Fixed values of 1.2 or 1.5 appear to be underestimated, especially at temperatures below 100 K. The temperature dependence of H-U iso in N-acetyl-l-4-hydroxyproline monohydrate is investigated. Imposing a constant temperature-independent multiplier of 1.2 or 1.5 for the riding hydrogen model is found to be inaccurate, and severely underestimates H-U iso below 100 K. Neutron diffraction data at temperatures of 9, 150, 200 and 250 K provide benchmark results for this study. X-ray diffraction data to high resolution, collected at temperatures of 9, 30, 50, 75, 100, 150, 200 and 250 K (synchrotron and home source), reproduce neutron results only when evaluated by aspherical-atom refinement models, since these take into account bonding and lone-pair electron density; both invariom and Hirshfeld-atom refinement models enable a more precise determination of the magnitude of H-atom displacements than independent-atom model refinements. Experimental efforts are complemented by computing displacement parameters following the TLS+ONIOM approach. A satisfactory agreement between all approaches is found

Topology Optimization of Vehicle Body Structure for Improved Ride & Handling

OpenAIRE

Lövgren, Sebastian; Norberg, Emil

2011-01-01

Ride and handling are important areas for safety and improved vehicle control during driving. To meet the demands on ride and handling a number of measures can be taken. This master thesis work has focused on the early design phase. At the early phases of design, the level of details is low and the design freedom is big. By introducing a tool to support the early vehicle body design, the potential of finding more efficient structures increases. In this study, topology optimization of a vehicl...

Injuries associated with the use of riding mowers in the United States, 2002-2007.

Science.gov (United States)

Hammig, Bart; Childers, Elizabeth; Jones, Ches

2009-10-01

To examine injuries among patients treated in an emergency department (ED) related to the use of a riding lawn mower. Data were obtained from the National Electronic Injury Surveillance System for the years 2002-2007. National estimates of ED visits for injuries associated with the use of a riding lawn mower were analyzed. Narrative text entries were categorized to provide a detailed record of the circumstances precipitating the injury. Average annual rates were calculated and logistic regression analyses were employed to determine risk estimates for patient disposition and demographic characteristics related to ED visits for injuries associated with riding mowers. From 2002 through 2007, there were an estimated 66,341 ED visits for injuries related to the use of riding lawnmowers in the U.S., with an average annual rate of 6.0 ED visits per 100,000 males, and 1.6 ED visits per 100,000 females. Older adults had higher rates of ED visits for injuries (7.2/100,000) than younger age groups. The most common injuries involved contusions (24%); sprains/strains (22%) and fractures (17%). The majority of patients (90%) were treated and released the same day. Results of logistic regression analyses revealed that older adults were more likely to be hospitalized when compared to younger age groups; and incidents involving rollovers [OR=5.45 (95% CI=3.22-9.23)] and being run over [6.01 (95% CI 3.23-11.17)] were more likely to result in hospitalization when compared to all other circumstances of injury. Riding mowers present injury patterns and circumstances that are different than those reported for push mowers. Circumstances related to injuries and age groups affected were varied, making prevention of riding mower injuries challenging. APPLICATION/IMPACT: Findings support the need to increase awareness and/or change the design of riding mowers with respect to risk of rollover injuries.

Hacking Your Ride: Is Web 2.0 Creating Vulnerabilities To Surface Transportation

Science.gov (United States)

2016-09-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. HACKING YOUR RIDE...3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE HACKING YOUR RIDE: IS WEB 2.0 CREATING VULNERABILITIES TO SURFACE...Prescribed by ANSI Std. 239-18 ii THIS PAGE INTENTIONALLY LEFT BLANK iii Approved for public release. Distribution is unlimited. HACKING

Calling, texting, and searching for information while riding a motorcycle: A study of university students in Vietnam.

Science.gov (United States)

Truong, Long T; De Gruyter, Chris; Nguyen, Hang T T

2017-08-18

The objective of this study was to investigate the prevalence of calling, texting, and searching for information while riding a motorcycle among university students and the influences of sociodemographic characteristics, social norms, and risk perceptions on these behaviors. Students at 2 university campuses in Hanoi and Ho Chi Minh City, the 2 largest cities in Vietnam, were invited to participate in an anonymous online survey. Data collection was conducted during March and May 2016. There were 741 respondents, of whom nearly 90% of students (665) were motorcycle riders. Overall prevalence of mobile phone use while riding is 80.9% (95% confidence interval [CI], 77.9-83.9%) with calling having a higher level of prevalence than texting or searching for information while riding: 74% (95% CI, 70.7-77.3%) vs. 51.7% (95% CI, 47.9-55.5%) and 49.9% (95% CI, 46.1-53.7%), respectively. Random parameter ordered probit modeling results indicate that mobile phone use while riding is associated with gender, motorcycle license duration, perceived crash risk, perceived risk of mobile phone snatching, and perceptions of friends' mobile phone use while riding. Mobile phone use while riding a motorcycle is highly prevalent among university students. Educational programs should focus on the crash and economic risk of all types of mobile phone use while riding, including calling, texting, and searching for information. In addition, they should consider targeting the influence of social norms and peers on mobile phone use while riding.

Co-evolution of three mega-trends nurtures un-captured GDP : Uber's ride-sharing revolution

OpenAIRE

Watanabe, Chihiro; Naveed, Kashif; Neittaanmäki, Pekka

2016-01-01

Uber used a disruptive business model driven by digital technology to trigger a ride-sharing revolution. The institution- al sources of the company’s platform ecosystem architecture were analyzed to explain this revolutionary change. Both an empirical analysis of a co-existing development trajectory with taxis and institutional enablers that helped to create Uber’s platform ecosystem were analyzed. The analysis identified a correspondence with the “two-faced” nature of ICT that nu...

The Value of Optimization in Dynamic Ride-Sharing: a Simulation Study in Metro Atlanta

NARCIS (Netherlands)

N.A.H. Agatz (Niels); A. Erera (Alan); M.W.P. Savelsbergh (Martin); X. Wang (Xing)

2010-01-01

textabstractSmartphone technology enables dynamic ride-sharing systems that bring together people with similar itineraries and time schedules to share rides on short-notice. This paper considers the problem of matching drivers and riders in this dynamic setting. We develop optimization-based

Spinal Cord Injuries in Wave-Riding Sports: The Influence of Environmental and Sport-Specific Factors.

Science.gov (United States)

Falconi, Audrey; Flick, David; Ferguson, Jason; Glorioso, John E

2016-01-01

Spinal cord injury is a nonfatal, catastrophic consequence of wave-riding sports. With surfing at the core, a multitude of activities have evolved that attempt to harness the power of ocean waves. The unique qualities of each wave-riding sport, in combination with the environmental factors of the ocean, define the risk for potential injuries. As wave-riding sports have become more advanced, athletes continue to push physical barriers. Taller waves are attempted while incorporating aerial maneuvers, all without protective equipment.

Free Riding Indexes for Ukrainian Economics Teachers.

Science.gov (United States)

McCorkle, Sarapage; Watts, Michael

1996-01-01

Reports on the adaptation and replication of Jane Leuthold's experiment concerning consumer choice, investments, and free riding indexes. A similar experiment, conducted in a Ukrainian classroom, produced similar results with a few notable exceptions. The exceptions reflected the Ukrainians' lack of familiarity with western economic thought. (MJP)

Calming the Waters or Riding the Waves?

DEFF Research Database (Denmark)

Rydén, Pernille; Kottika, Efthymia; Hossain, Muhammad Ismail

Traditional consumer anger management tends to be compromising rather than empowering the brand. This paper conceptualizes and provides a case example on how consumer empowerment and negative emotions can in fact create opportunities for companies to ride the waves of consumer anger in a way that...

Review of the system compatibility and ride-through options for AC and DC drives including multilevel inverters

Energy Technology Data Exchange (ETDEWEB)

Jouanne, A. von [Power Electronics Lab. - Elect. and Compt. Engineering Dept. - Oregon State Univ., Corvallis, OR (United States); Ben Banerjee, B. [Electric Power Research Inst. - Power Electronics, Energy Delivery, Palo Alto, CA (United States)

2000-07-01

Adjustable speed drive (ASD) compatibility and ride-through issues have caused increased concerns due to the susceptibility of AC and DC drives to power disturbances, and the costly results of process disruptions. These losses can be avoided for critical production processes by using ASDs with ride-through capabilities. This paper assesses industrial ride-through requirements and application issues for AC and DC drives, including medium voltage (2300/4160 V) multi-level inverter topologies. Ride-through alternatives are evaluated based on design, implementation and cost considerations in order to determine the most suitable solutions for various kVA ratings and time duration requirements. (orig.)

CircleRides: developing an older adult transportation application and evaluating feedback.

Science.gov (United States)

Heinz, Melinda; Kelly, Norene

2015-05-01

The purpose of the current study was to assess perceptions of CircleRides, a paper prototype of a service website designed to meet older adult transportation needs. Researchers used purposive sampling to conduct two focus groups comprised of older adults to obtain feedback on the CircleRides prototype at the beginning of its iterative design process. One focus group was conducted in a continuing care retirement community (n = 13) and the other in an independent living community for older adults (n = 11). The study assessed perceptions of the CircleRides prototype as well as self-reported older adult transportation preferences and needs. Three themes emerged from the data: (a) trust and concern, (b) socialization, and (c) flexibility and options. Researchers found that participants are interested in transportation options; however, concern exists about trusting a new system or prototype that has not established a reputation. Findings from the current study offer lessons learned for future iterations and for creating transportation prototypes for older adults. Copyright 2015, SLACK Incorporated.

Port Authority of Allegheny County Park and Rides

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset includes the GIS shapefile for Port Authority of Allegheny County's Park and Ride facilities. This layer is updated annually or on an as-needed basis...

Research on the Effects of Hydropneumatic Parameters on Tracked Vehicle Ride Safety Based on Cosimulation

Directory of Open Access Journals (Sweden)

Shousong Han

2017-01-01

Full Text Available Ride safety of a tracked vehicle is the key focus of this research. The factors that affect the ride safety of a vehicle are analyzed and evaluation parameters with their criteria are proposed. A multibody cosimulation approach is used to investigate the effects of hydropneumatic parameters on the ride safety and aid with design optimization and tuning of the suspension system. Based on the cosimulation environment, the vehicle multibody dynamics (MBD model and the road model are developed using RecurDyn, which is linked to the hydropneumatic suspension model developed in Lab AMESim. Test verification of a single suspension unit is accomplished and the suspension parameters are implemented within the hydropneumatic model. Virtual tests on a G class road at different speeds are conducted. Effects of the accumulator charge pressure, damping diameter, and the track tensioning pressure on the ride safety are analyzed and quantified. This research shows that low accumulator charge pressure, improper damping diameter, and insufficient track tensioning pressure will deteriorate the ride safety. The results provide useful references for the optimal design and control of the parameters of a hydropneumatic suspension.

Development of an ultra-portable ride quality meter.

Science.gov (United States)

2012-12-01

FRAs Office of Research and Development has funded the development of an ultra-portable ride quality meter (UPRQM) under the Small Business and Innovative Research (SBIR) program. Track inspectors can use the UPRQM to locate segments of track that...

Impact of fault ride-through requirements on fixed-speed wind turbine structural loads

DEFF Research Database (Denmark)

Hansen, Anca Daniela; Cutululis, Nicolaos Antonio; Markou, Helen

2011-01-01

by performing a rainflow and a statistical analysis for fatigue and ultimate structural loads, respectively. Two cases are compared i.e. one where the turbine is immediately disconnected from the grid when a grid fault occurs and one where the turbine is equipped with a fault ride-through controller...... and therefore it is able to remain connected to the grid during the grid fault. Copyright © 2010 John Wiley & Sons, Ltd....

Leisure riding horses: research topics versus the needs of stakeholders.

Science.gov (United States)

Janczarek, Iwona; Wilk, Izabela

2017-07-01

Horses intended for leisure riding do not undergo any selection and most often retired sports horses or defective horses are chosen, as a low selling price determines their purchase by a leisure riding center. Unfortunately, horses bought at low prices usually have low utility value, are difficult to handle, require a special or individual approach and do not provide satisfaction in riding. However, neither modern horse breeding nor scientific research address the need to breed horses for leisure activities. There is no clear definition of a model leisure horse and criteria or information for its selection are not readily available in scientific publications. A wide spectrum of research methods may be used to evaluate various performance traits in horses intended for leisure activities. The fact that the population of recreational horses and their riders outnumber sporting horses should attract the special attention of scientific research. Their utility traits need to be determined with modern technology and methods in the same way they are for sporting horses. Such a system of evaluation would be very helpful for riders. © 2017 Japanese Society of Animal Science.

A Motion Simulator Ride Associated With Headache and Subdural Hematoma: First Case Report.

Science.gov (United States)

Scranton, Robert A; Evans, Randolph W; Baskin, David S

2016-02-01

We report the first case report of symptomatic bilateral subdural hematomas (SDH) associated with riding a centrifugal motion simulator ride. A previously healthy 55-year-old male developed new onset daily headaches 1 week after going on the ride that were due to symptomatic bilateral SDH requiring operative intervention with a full recovery. There was no history of other trauma or other systemic or intracranial abnormality to account for the development of the SDH. We review the headaches and other clinical features associated with chronic SDH. Twelve cases of roller coaster headaches due to SDH associated with riding roller coasters have been reported. The pathophysiology is reviewed, which we believe is the same mechanism that may be responsible in this case. Although it is possible that this neurovascular injury is truly rare, it is also possible that this injury is underreported as patients and physicians may not make the association or physicians have not reported additional cases. The risk of this injury likely increases with age, as the size of the subdural space increases, and may support the maxim that "roller coasters and simulators are for kids." © 2015 American Headache Society.

Minimum Makespan Multi-vehicle Dial-a-Ride

DEFF Research Database (Denmark)

Gørtz, Inge Li; Nagarajan, Viswanath; Ravi, R.

2009-01-01

be left at intermediate vertices and transported by more than one vehicle, while being moved from source to destination. Approximation algorithms for the single vehicle Dial-a-Ride problem (q = 1) have been considered in [3,10]. Our main results are an O(log3n)-approximation algorithm for preemptive multi...

Ride comfort enhancement in railway vehicle by the reduction of the car body structural flexural vibration

Science.gov (United States)

Dumitriu, M.

2017-08-01

The paper approaches the issue of reduction in the vertical bending vibrations of the railway vehicle carbody and the ride comfort enhancement at high velocities, starting from the prospect of isolating the vibrations by the best possible selection of the passive suspension damping in the vehicle. To this purpose, the examination falls on the influence of the vertical suspension damping upon the vibrations regime of the vehicle at the bending resonance frequency and upon the ride comfort. The results of the numerical simulations regarding the frequency response of the carbody acceleration and the comfort index will be therefore used. A value of the secondary suspension damping can be thus identified that will provide the best ride comfort performance. Similarly, the ride comfort can be increased by raising the primary suspension damping ratio.

Demographic and psychological variables affecting test subject evaluations of ride quality

Science.gov (United States)

Duncan, N. C.; Conley, H. W.

1975-01-01

Ride-quality experiments similar in objectives, design, and procedure were conducted, one using the U.S. Air Force Total In-Flight Simulator and the other using the Langley Passenger Ride Quality Apparatus to provide the motion environments. Large samples (80 or more per experiment) of test subjects were recruited from the Tidewater Virginia area and asked to rate the comfort (on a 7-point scale) of random aircraft motion typical of that encountered during STOL flights. Test subject characteristics of age, sex, and previous flying history (number of previous airplane flights) were studied in a two by three by three factorial design. Correlations were computed between one dependent measure, the subject's mean comfort rating, and various demographic characteristics, attitudinal variables, and the scores on Spielberger's State-Trait Anxiety Inventory. An effect of sex was found in one of the studies. Males made higher (more uncomfortable) ratings of the ride than females. Age and number of previous flights were not significantly related to comfort ratings. No significant interactions between the variables of age, sex, or previous number of flights were observed.

On the temperature dependence of H-U{sub iso} in the riding hydrogen model

Energy Technology Data Exchange (ETDEWEB)

Lübben, Jens; Volkmann, Christian [Institut für Anorganische Chemie, Georg-August-Universität, Tammannstrasse 4, D-37077 Göttingen (Germany); Grabowsky, Simon [School of Chemistry and Biochemistry, Stirling Highway 35, WA-6009 Crawley (Australia); Edwards, Alison [Bragg Institute, Australian Nuclear Science and Technology Organisation, Locked Bag 2001, Kirrawee DC, NSW 2232 (Australia); Morgenroth, Wolfgang [Institut für Geowissenschaften, Abteilung Kristallographie, Goethe-Universität, Altenhöferallee 1, 60438 Frankfurt am Main (Germany); Fabbiani, Francesca P. A. [GZG, Abteilung Kristallographie, Georg-August Universität, Goldschmidtstrasse 1, 37077 Göttingen (Germany); Sheldrick, George M. [Institut für Anorganische Chemie, Georg-August-Universität, Tammannstrasse 4, D-37077 Göttingen (Germany); Dittrich, Birger, E-mail: birger.dittrich@chemie.uni-hamburg.de [Institut für Anorganische und Angewandte Chemie, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany); Institut für Anorganische Chemie, Georg-August-Universität, Tammannstrasse 4, D-37077 Göttingen (Germany)

2014-07-01

The temperature dependence of hydrogen U{sub iso} and parent U{sub eq} in the riding hydrogen model is investigated by neutron diffraction, aspherical-atom refinements and QM/MM and MO/MO cluster calculations. Fixed values of 1.2 or 1.5 appear to be underestimated, especially at temperatures below 100 K. The temperature dependence of H-U{sub iso} in N-acetyl-l-4-hydroxyproline monohydrate is investigated. Imposing a constant temperature-independent multiplier of 1.2 or 1.5 for the riding hydrogen model is found to be inaccurate, and severely underestimates H-U{sub iso} below 100 K. Neutron diffraction data at temperatures of 9, 150, 200 and 250 K provide benchmark results for this study. X-ray diffraction data to high resolution, collected at temperatures of 9, 30, 50, 75, 100, 150, 200 and 250 K (synchrotron and home source), reproduce neutron results only when evaluated by aspherical-atom refinement models, since these take into account bonding and lone-pair electron density; both invariom and Hirshfeld-atom refinement models enable a more precise determination of the magnitude of H-atom displacements than independent-atom model refinements. Experimental efforts are complemented by computing displacement parameters following the TLS+ONIOM approach. A satisfactory agreement between all approaches is found.

Effect of health education on the riding habits of commercial motorcyclists in Uyo, southern Nigeria.

Science.gov (United States)

Johnson, O E; Owoaje, E T

2012-01-01

The increasing number of motorcyclists in Nigeria has led to a rise in poor road safety practices leading to increased rate of accidents. This study was conducted to implement and evaluate the effect of safety education on riding habits of motorcyclists in Uyo, Nigeria. The intervention study was conducted among commercial motorcyclists in Uyo with controls from another town in Akwa Ibom State. Baseline information was collected from both groups on their riding habits. Motorcyclists in Uyo were educated on appropriate road safety practices. Data was collected from both groups three months later and analysed using the Statistical Package for Social Sciences version 11. A total of 200 respondents participated in the study, 100 per group. At 3 months post-intervention, those riding when tired reduced in the intervention group from 69% at baseline to 42% (p Safety education improved many riding habits of motorcyclists in the intervention group. Road safety education is recommended for all motorcyclists to ensure safer road use.

Overuse Injuries Associated with Mountain Biking: Is Single-Speed Riding a Predisposing Factor?

Directory of Open Access Journals (Sweden)

Michael T. Lebec

2014-01-01

Full Text Available Though mountain bikers are at significant risk for overuse injury, there is minimal quality research describing this relationship. Single-speed mountain biking, in which participants pedal a bike with only a single gear, may place riders at even greater risk for overuse problems due to the disproportionate physical effort associated with this type of riding. The focus of this study was to provide additional perspective on overuse injuries sustained by mountain bikers and to determine if single-speed mountain biking places participants at greater risk for overuse conditions. Four hundred and four (404 mountain bikers were surveyed concerning overuse injuries sustained during the previous year. Findings indicate that 63% of respondents reported an overuse injury affecting at least one area with the most commonly reported areas being the lumbar spine, knees, hand/wrist, and cervical spine. Individuals riding single-speed mountain bikes did not have a higher incidence of overuse injuries than riders of multiple-geared bikes. However, respondents who split time between riding single-speed and multiple-geared bikes were significantly more likely to report an overuse syndrome than those only riding single-speed or multiple-geared bikes (p = 0.0104. This group of riders may be at greater risk for overuse injury due to excessive fatigue and poor biomechanics.

Influência das efemérides transmitidas e precisas no transporte de coordenadas

Directory of Open Access Journals (Sweden)

Felipe Mendes Suci

2010-01-01

Full Text Available O presente estudo descreve uma metodologia que dá suporte para a comparação dos resultados obtidos de processamentos com dados GPS utilizando-se de diferentes tipos de efemérides (transmitidas, ultrarrápidas, rápidas e finais. A metodologia proposta consta de diferentes etapas, que vão desde a obtenção dos dados RINEX (GPS e .sp3 (efemérides precisas nos sítios do IBGE e IGS respectivamente, passando pela atualização e transformação entre diferentes referenciais geodésicos (utilizando a Transformação Generalizada de Helmert, mudança entre sistemas cartesiano geocêntrico e geodésico local até a comparação das discrepâncias obtidas entre as coordenadas obtidas a partir do processamento (utilizando-se do aplicativo Trimble Geomatics Office - TGO e as coordenadas presentes nos descritivos. Os resultados mostraram que não há diferença relevante entre as soluções alcançadas com os diferentes tipos de efemérides precisas para as linhas de base analisadas nesse trabalho, porém, houve diferença considerável entre essas coordenadas e as obtidas com as efemérides transmitidas.

Planning, implementing and evaluating a social and communication skills course for riding instructors

OpenAIRE

Seefeld, Annika

2016-01-01

Social and emotional skills are very important for effective coaching. As research in this field is still very limited, the purpose of this study was to plan, implement and evaluate a course teaching social and emotional skills to riding instructors. The objective of this research project was to analyse the usefulness and feasibility of a social and communication skills course for riding instructors. The present research study is an educational action research case study approa...

Riding Bikes: A Pastime for Every Child

Science.gov (United States)

Mathias, Michelle

2011-01-01

People have heard the expression "It's as easy as riding a bike." But the idea of a child with special needs balancing, steering, and pedaling a bike can seem out of reach for some; especially when he may be unable to walk unaided or hold his head up without support. Physical capabilities or stamina need not keep a child from this pleasurable…

Distributed Low Voltage Ride-Through Operation of Power Converters in Grid-Connected Microgrids under Voltage Sags

DEFF Research Database (Denmark)

Zhao, Xin; Meng, Lexuan; Dragicevic, Tomislav

2015-01-01

it can make the MG a contributor in smooth ride through the faults. In this paper, a reactive power support strategy using droop controlled converters is proposed to aid MG riding through three phase symmetrical voltage sags. In such a case, the MGs should inject reactive power to the grid to boost...... the voltage in all phases at AC common bus. However, since the line admittances from each converter to point of common coupling (PCC) are not identical, the injected reactive power may not be equally shared. In order to achieve low voltage ride through (LVRT) capability along with a good power sharing...

Fast Coordinated Control of DFIG Wind Turbine Generators for Low and High Voltage Ride-Through

Directory of Open Access Journals (Sweden)

Yun Wang

2014-06-01

Full Text Available This paper presents a fast coordinated control scheme of the rotor side converter (RSC, the Direct Current (DC chopper and the grid side converter (GSC of doubly fed induction generator (DFIG wind turbine generators (WTGs to improve the low voltage ride through (LVRT and high voltage ride through (HVRT capability of the DFIG WTGs. The characteristics of DFIG WTGs under voltage sags and swells were studied focusing on the DFIG WTG stator flux and rotor voltages during the transient periods of grid voltage changes. The protection schemes of the rotor crowbar circuit and the DC chopper circuit were proposed considering the characteristics of the DFIG WTGs during voltage changes. The fast coordinated control of RSC and GSC were developed based on the characteristic analysis in order to realize efficient LVRT and HVRT of the DFIG WTGs. The proposed fast coordinated control schemes were verified by time domain simulations using Matlab-Simulink.

Fault ride-through and voltage support of permanent magnet synchronous generator wind turbines

Energy Technology Data Exchange (ETDEWEB)

Michalke, G.; Hartkopf, T. [Darmstadt Technical Univ., Dept. of Renewable Energies (Germany); Hansen, A.D. [Risoe National Lab., DTU, Wind Energy Dept. (Denmark)

2007-11-15

This paper presents a control strategy of direct driven multipole PMSG wind turbines, which enhances the fault ride-through and voltage support capability of such wind turbines during grid faults. A dynamic simulation model of the turbine is implemented in the simulation software DIgSILENT. Simulation results approve the effectiveness of the developed control strategy. It is shown that PMSG wind turbines equipped with such control even enable nearby connected conventional wind turbines to ride-through grid faults. (au)

The Theory of Dynamic Public Transit Priority with Dynamic Stochastic Park and Ride

OpenAIRE

Zhu, Chengming; Chen, Yanyan; Ma, Changxi

2014-01-01

Public transit priority is very important for relieving traffic congestion. The connotation of dynamic public transit priority and dynamic stochastic park and ride is presented. Based on the point that the travel cost of public transit is not higher than the travel cost of car, how to determine the level of dynamic public transit priority is discussed. The traffic organization method of dynamic public transit priority is introduced. For dynamic stochastic park and ride, layout principle, scal...

Risky riding behavior on two wheels: the role of cognitive, social, and personality variables among young adolescents.

Science.gov (United States)

Falco, Alessandra; Piccirelli, Alessandra; Girardi, Damiano; Dal Corso, Laura; De Carlo, Nicola A

2013-09-01

The main objective of this study was to analyze and estimate the relations between risky riding behaviors and some personality and sociocognitive variables through structural equation modeling. We focused on two-wheel riding behavior among a sample of 1,028 Italian adolescents at their first driving experience. The main findings confirmed the role of personality in influencing riding behavior directly as well as indirectly through risk perception. In particular, risk perception was a significant mediator between personality, social norm, and riding behavior. The significant relations that emerged in the general sample were further confirmed in the two specific sub-samples of males and females. In terms of social marketing and educational communication, it may consequently be advisable to proceed in an integrated and coordinated manner at both the cognitive and social level, taking into account some "dispositions to risk" related to personality. The integrated and coordinated action on different levels--cognitive, social, and personality--may therefore allow more effective and significant results in reducing those risky riding behaviors that often underlie young two-wheel riders' higher involvement in traffic accidents. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Simulations of Carnival Rides and Rube Goldberg Machines for the Visualization of Concepts of Statics and Dynamics

Science.gov (United States)

Howard, William; Williams, Richard; Yao, Jason

2010-01-01

Solid modeling is widely used as a teaching tool in summer activities with high school students. The addition of motion analysis allows concepts from statics and dynamics to be introduced to students in both qualitative and quantitative ways. Two sets of solid modeling projects--carnival rides and Rube Goldberg machines--are shown to allow the…

The choice of park and ride facilities: an analysis using a context-dependent hierarchical choice experiment

OpenAIRE

Ilona D M Bos; Rob E C M Van der Heijden; Eric J E Molin; Harry J P Timmermans

2004-01-01

Park and ride (P & R) facilities have been proposed in several countries to alleviate the accessibility problems in cities. Despite growing accessibility problems, these facilities do not seem to attract the expected number of car drivers and are underused. In an attempt to measure consumer evaluations of the attributes of P & R facilities, a stated choice experiment, based on the method of hierarchical information integration, was conducted in the city of Nijmegen, The Netherlands. This pape...

mitigating mitigating free riding in peer-to-peer networks

African Journals Online (AJOL)

eobe

The performance of peer-to-peer systems is based on the quality and quantity of resource contributions from peer systems ... riding [3]. There are several measurement studies ...... J. S. Hua, D. C. Huang, S M Yen, and C. W. Chena, “A dynamic.

Ride control of surface effect ships using distributed control

Directory of Open Access Journals (Sweden)

Asgeir J. Sørensen

1994-04-01

Full Text Available A ride control system for active damping of heave and pitch accelerations of Surface Effect Ships (SES is presented. It is demonstrated that distributed effects that are due to a spatially varying pressure in the air cushion result in significant vertical vibrations in low and moderate sea states. In order to achieve a high quality human comfort and crew workability it is necessary to reduce these vibrations using a control system which accounts for distributed effects due to spatial pressure variations in the air cushion. A mathematical model of the process is presented, and collocated sensor and actuator pairs are used. The process stability is ensured using a controller with appropriate passivity properties. Sensor and actuator location is also discussed. The performance of the ride control system is shown by power spectra of the vertical accelerations obtained from full scale experiments with a 35 m SES.

Riding Pontic--Aesthetic Journey Aesthetic Goal.

Science.gov (United States)

Rohilla, Byajit Kumar; Choudhary, Shweta; Manisha, Kukreja; Walia, Pawanjit Singh; Nafria, Anil

2015-01-01

The increasing concern for esthetics during the orthodontic treatment can be measured by the increasing popularity ofaesthetic brackets, lingual technique, smaller sized metal brackets, and clear alignment therapy. Many clients, especially adolescents, are self-conscious about their appearance in social and professional situations, and they refuse to tolerate the inevitable "black holes" of edentulous spaces during orthodontic treatment. This article describes the use, fabrication, modifications, and shortcomings of riding pontics; and illustrates how their use provides aesthetic, psychological and functional benefits.

A novel "hitch-and-ride" deep biliary cannulation method during rendezvous endoscopic ultrasound-guided ERCP technique.

Science.gov (United States)

Nakai, Yousuke; Isayama, Hiroyuki; Matsubara, Saburo; Kogure, Hirofumi; Mizuno, Suguru; Hamada, Tsuyoshi; Takahara, Naminatsu; Nakamura, Tomoka; Sato, Tatsuya; Takeda, Tsuyoshi; Hakuta, Ryunosuke; Ishigaki, Kazunaga; Saito, Kei; Tada, Minoru; Koike, Kazuhiko

2017-10-01

Background and study aim Endoscopic ultrasound-guided rendezvous (EUS-RV) is increasingly reported as a treatment option after failed endoscopic retrograde cholangiopancreatography. We developed a novel "hitch-and-ride" catheter for biliary cannulation to reduce the risk of guidewire loss during EUS-RV. Patients and methods We retrospectively evaluated safety and technical success of EUS-RV between June 2011 and May 2016. Biliary cannulation during EUS-RV using three methods - over-the-wire, along-the-wire, and hitch-and-ride - were compared. Results A total of 30 EUS-RVs were attempted and the technical success rate was 93.3 %, with two failures (one bile duct puncture and one guidewire insertion). After 28 cases of successful guidewire passage, cannulation was attempted by the over-the-wire (n = 13), along-the-wire (n = 4) or hitch-and-ride (n = 11) method. Only the hitch-and-ride method achieved biliary cannulation without guidewire loss or conversion to the other methods. Time to cannulation was shorter with the hitch-and-ride method (4 minutes) than with over-the-wire and along-the-wire methods (9 and 13 minutes, respectively). The adverse event rate of EUS-RV was 23.3 %. Conclusion A novel hitch-and-ride catheter was feasible for biliary cannulation after EUS-RV. © Georg Thieme Verlag KG Stuttgart · New York.

Mitigating Free Riding in Peer-To-Peer Networks: Game Theory ...

African Journals Online (AJOL)

Mitigating Free Riding in Peer-To-Peer Networks: Game Theory Approach. ... In this paper, we model the interactions between peers as a modified gift giving game and proposed an utility exchange incentive ... AJOL African Journals Online.

The social context of motorcycle riding and the key determinants influencing rider behavior: a qualitative investigation.

Science.gov (United States)

Tunnicliff, Deborah; Watson, Barry; White, Katherine M; Lewis, Ioni; Wishart, Darren

2011-08-01

Given the increasing popularity of motorcycle riding and heightened risk of injury or death associated with being a rider, this study explored rider behavior as a determinant of rider safety and, in particular, key beliefs and motivations that influence such behavior. To enhance the effectiveness of future education and training interventions, it is important to understand riders' own views about what influences how they ride. Specifically, this study sought to identify key determinants of riders' behaviors in relation to the social context of riding, including social and identity-related influences relating to the group (group norms and group identity) as well as the self (moral/personal norm and self-identity). Qualitative research was undertaken via group discussions with motorcycle riders (n = 41). The findings revealed that those in the group with which one rides represent an important source of social influence. Also, the motorcyclist (group) identity was associated with a range of beliefs, expectations, and behaviors considered to be normative. Exploration of the construct of personal norm revealed that riders were most cognizant of the "wrong things to do" when riding; among those issues raised was the importance of protective clothing (albeit for the protection of others and, in particular, pillion passengers). Finally, self-identity as a motorcyclist appeared to be important to a rider's self-concept and was likely to influence on-road behavior. Overall, the insight provided by the current study may facilitate the development of interventions including rider training as well as public education and mass media messages. The findings suggest that these interventions should incorporate factors associated with the social nature of riding in order to best align it with some of the key beliefs and motivations underpinning riders' on-road behaviors.

Power-Up: Exploration and Play in a Novel Modified Ride-On Car for Standing.

Science.gov (United States)

Logan, Samuel W; Lobo, Michele A; Feldner, Heather A; Schreiber, Melynda; MacDonald, Megan; Winden, Haylee N; Stoner, Tracy; Galloway, James Cole

2017-01-01

The purpose of this study was to compare the physical activity and play behaviors of preschoolers without disabilities and 1 preschooler with physical disability. Participants were 42 preschoolers without disabilities and 1 preschooler with physical disability (Child A). Child A used either crutches or a modified ride-on car while in the gymnasium and playground. In the gymnasium, Child A engaged in less solitary play and more parallel play while using the modified ride-on car compared with crutches. On the playground, Child A engaged in more sitting and less running while using crutches compared with preschoolers without disabilities. On the playground, Child A engaged in more peer interaction and less teacher interaction when using the modified ride-on car compared with crutches. For children with disabilities who may use assistive devices, clinicians, families, and teachers are encouraged to embrace a "right device, right time, right place" approach.

Effects of hippotherapy and therapeutic horseback riding on postural control or balance in children with cerebral palsy: a meta-analysis.

Science.gov (United States)

Zadnikar, Monika; Kastrin, Andrej

2011-08-01

This research review and meta-analysis presents an overview of the effects of hippotherapy and therapeutic horseback riding (THR) on postural control or balance in children with cerebral palsy (CP). To synthesize previous research findings, a systematic review and meta-analysis were undertaken. Relevant studies were identified by systematic searches of multiple online databases from the inception of the database through to May 2010. Studies were included if they fulfilled the following criteria: (1) quantitative study design, (2) investigation of the effect of hippotherapy or THR on postural control or balance, and (3) the study group comprised children and adults with CP. The selected articles were rated for methodological quality. The treatment effect was coded as a dichotomous outcome (positive effect or no effect) and quantified by odds ratio (OR). The pooled treatment effect was calculated using a random-effects model. Meta-regression of the effect size was performed against study covariates, including study size, publication date, and methodological quality score. From 77 identified studies, 10 met the inclusion criteria. Two were excluded because they did not include a comparison group. Therapy was found to be effective in 76 out of 84 children with CP included in the intervention groups. The comparison groups comprised 89 children: 50 non-disabled and 39 with CP. A positive effect was shown in 21 of the children with CP in the comparison group regardless of the activity undertaken (i.e. physiotherapy, occupational therapy, sitting on a barrel or in an artificial saddle). The pooled effect size estimate was positive (OR 25.41, 95% CI 4.35, 148.53), demonstrating a statistically significant effectiveness of hippotherapy or THR in children with CP (phippotherapy and THR. Although the generalization of our findings may be restricted by the relatively small sample size, the results clearly demonstrate that riding therapy is indicated to improve postural control

Optimizing itineraries in public transportation with walks between rides

NARCIS (Netherlands)

de Jonge, Bram; Teunter, Ruud H.

We study the problem of finding an optimal itinerary to travel from a starting location to a destination location using public transport, where we allow travelers to alternate rides with (short) walks. The main difference with previous research is that we take all possible walks that a traveler can

Free Riding or Trust?

DEFF Research Database (Denmark)

Svendsen, Gert Tinggaard; Nilsson, Jerker

2011-01-01

It is often observed that members have little interest in monitoring their cooperatives. One explanation is that the members are free-riders, hoping that others will perform the task. Another explanation is that the weak member interest is a consequence of members having trust in the leadership....... These competing explanations refer to the theory of collective action and the social capital paradigm, respectively, and may be linked to the classical Gesellschaft and Gemeinschaft concepts. Hence, one may expect free-rider behavior when conditions of Gesellschaft exist and trustful behavior when Gemeinschaft...... conditions rule. These propositions get support from five studies of members’ readership of their cooperatives’ annual reports. In large and heterogeneous memberships there is free-riding behavior, which explains the members’ low interest in governing their cooperatives. To a limited extent a membership may...

Saturday Subway Ride: A Report on the Initial Tryout.

Science.gov (United States)

Quilling, Mary R.; And Others

"Saturday Subway Ride," a program designed to teach pupils creative thinking techniques and positive attitudes toward creative ideas, is a 92-page workbook in a story-exercise format. Secondary objectives for the product include improving verbal fluency and creative writing. Three classrooms 61 sixth graders and 34 fifth graders at two…

Assessment of a rail vehicle running with the damaged wheel on a ride comfort for passengers

Directory of Open Access Journals (Sweden)

Dižo Ján

2018-01-01

Full Text Available In certain conditions rail vehicles wheels can be during operation damaged. Then, the profile of wheels is no longer circular, but it is changed depending on the type and severity of defects. When such rail vehicle with the damaged wheel operates, the quality of a ride comfort for passenger is degraded. This article is focused on the assessment of ride comfort for passenger based on results obtained from dynamic analyses. Simulations and calculations were carried out in commercial multibody software. In our research we considered one type of the railway wheel untrueness – wheel-flat. This type of wheel damaging is relatively common and has such influence on the ride comfort for passenger worsening, which needs to be detected and investigated.

Cognitive motivations of free riding and cooperation and impaired strategic decision making in schizophrenia during a public goods game.

Science.gov (United States)

Chung, Dongil; Kim, Yang-Tae; Jeong, Jaeseung

2013-01-01

Schizophrenia is generally characterized by various positive and negative symptoms that are accompanied by significant social dysfunction. Various researchers investigated the functional impairments in schizophrenia including impaired theory of mind (TOM), poor integration of affective and cognitive information, and malfunctioning of adaptive and strategic learning process. However, most of the studies were limited to simplified cognitive tests or computerized choice games that exclude real social interaction. The aim of the current study was to investigate human strategies based on the incentives and particularly the cognitive and emotional motivations of free riding. We examined the decision patterns of 41 healthy subjects (HSs) and 37 schizophrenia patients (SZ) during the public goods game (PGG), one of the games simulating human cooperation and free riding in group interactions. Strategic decision processes during the iterative binary PGG were assessed in terms of cognitive understanding, loss sensitivity, and TOM. We found that greed and loss sensitivity both motivated free-riding behavior in the HS, but that they were more vulnerable to greedy incentives than to possible loss. More significantly, the SZ clearly displayed a lower prevalence of free riding and distinct decision patterns from HS. Nonstrategic and unexpectedly low free ridings in the SZ likely arise from poor integration of cognitive and affective information. We suggest that loss sensitivity and TOM as well as cognitive understanding are involved in regulation of the free riding and cooperative behavior.

FDI based on Artificial Neural Network for Low-Voltage-Ride-Through in DFIG-based Wind Turbine.

Science.gov (United States)

Adouni, Amel; Chariag, Dhia; Diallo, Demba; Ben Hamed, Mouna; Sbita, Lassaâd

2016-09-01

As per modern electrical grid rules, Wind Turbine needs to operate continually even in presence severe grid faults as Low Voltage Ride Through (LVRT). Hence, a new LVRT Fault Detection and Identification (FDI) procedure has been developed to take the appropriate decision in order to develop the convenient control strategy. To obtain much better decision and enhanced FDI during grid fault, the proposed procedure is based on voltage indicators analysis using a new Artificial Neural Network architecture (ANN). In fact, two features are extracted (the amplitude and the angle phase). It is divided into two steps. The first is fault indicators generation and the second is indicators analysis for fault diagnosis. The first step is composed of six ANNs which are dedicated to describe the three phases of the grid (three amplitudes and three angle phases). Regarding to the second step, it is composed of a single ANN which analysis the indicators and generates a decision signal that describes the function mode (healthy or faulty). On other hand, the decision signal identifies the fault type. It allows distinguishing between the four faulty types. The diagnosis procedure is tested in simulation and experimental prototype. The obtained results confirm and approve its efficiency, rapidity, robustness and immunity to the noise and unknown inputs. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Cooperate or Free Ride?

DEFF Research Database (Denmark)

Hansen, Per H.

2012-01-01

of international cooperation. On the other hand, the evidence seems to confirm Kindleberger's hypothesis that small countries were free riding during the international financial crisis of 1931, and that therefore there is a need for some coordinating mechanism, or a hegemon, in such crises....... in the establishment of the BIS and free riders in the Austrian crisis, even though there were marked differences in their attitude to international cooperation. These results run counter to the views of those International Political Economy (IPE) theorists who argue that small states should be in favour......In this article, I discuss the role of the three Scandinavian central banks in the establishment of the Bank for International Settlements (BIS) in 1930, and in the international lender of last resort operation towards Austria in 1931. I argue that small central banks were reluctant supporters...

An approach to high speed ship ride quality simulation

Science.gov (United States)

Malone, W. L.; Vickery, J. M.

1975-01-01

The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status.

Hospital-treated injuries from horse riding in Victoria, Australia: time to refocus on injury prevention?

Science.gov (United States)

O'Connor, Siobhán; Hitchens, Peta L; Fortington, Lauren V

2018-01-01

The most recent report on hospital-treated horse-riding injuries in Victoria was published 20 years ago. Since then, injury countermeasures and new technology have aimed to make horse riding safer for participants. This study provides an update of horse-riding injuries that required hospital treatment in Victoria and examines changes in injury patterns compared with the earlier study. Horse-riding injuries that required hospital treatment (hospital admission (HA) or emergency department (ED) presentations) were extracted from routinely collected data from public and private hospitals in Victoria from 2002-2003 to 2015-2016. Injury incidence rates per 100 000 Victorian population per financial year and age-stratified and sex-stratified injury incidence rates are presented. Poisson regression was used to examine trends in injury rates over the study period. ED presentation and HA rates were 31.1 and 6.6 per 100 000 person-years, increasing by 28.8% and 47.6% from 2002 to 2016, respectively. Female riders (47.3 ED and 10.1 HA per 100 000 person-years) and those aged between 10 and 14 years (87.8 ED and 15.7 HA per 100 000 person-years) had the highest incidence rates. Fractures (ED 29.4%; HA 56.5%) and head injuries (ED 15.4%; HA 18.9%) were the most common injuries. HA had a mean stay of 2.6±4.1 days, and the mean cost per HA was $A5096±8345. Horse-riding injuries have remained similar in their pattern (eg, types of injuries) since last reported in Victoria. HA and ED incidence rates have increased over the last 14 years. Refocusing on injury prevention countermeasures is recommended along with a clear plan for implementation and evaluation of their effectiveness in reducing injury.

Effect of Health Education on the Riding Habits of Commercial ...

African Journals Online (AJOL)

METHODS: The intervention study was conducted among commercial motorcyclists in Uyo with controls from another town in Akwa Ibom State. Baseline information was collected from both groups on their riding habits. Motorcyclists in Uyo were educated on appropriate road safety practices. Data was collected from both ...

Fancy a ride?

CERN Multimedia

Anaïs Schaeffer

2014-01-01

This Sunday 7 September, don’t miss your chance to climb into a supercar, one of those exceptional machines that tear up the tracks and that you sometimes hear revving their engines on the motorway. The 2014 supercar experience day, organised by members of CERN, will allow car lovers to go for a ride in style and all for a good cause!   Supercars at the 2013 experience day. Photo: Kevin Mazzilli. If you have always dreamt of sitting in a Ferrari, feeling the vibrations of a Lamborghini, or losing yourself in the hushed calm of a classic car, don’t miss the supercar experience day taking place on Sunday, 7 September! This event has been organised by CERN’s own car enthusiasts, in collaboration with the charity Kumansansa – Children of Zambia, founded by two CERN members. It will take place for the third consecutive year in the car park of the Macumba leisure centre in Saint-Julien-en-Genevois (France). From 9.30 a.m. to 6 p.m., visitors old and young (c...

Exploring Spatiotemporal Patterns of Long-Distance Taxi Rides in Shanghai

Directory of Open Access Journals (Sweden)

Hangbin Wu

2017-11-01

Full Text Available Floating Car Data (FCD has been analyzed for various purposes in past years. However, limited research about the behaviors of taking long-distance taxi rides has been made available. In this paper, we used data from over 12,000 taxis during a six-month period in Shanghai to analyze the spatiotemporal patterns of long-distance taxi trips. We investigated these spatiotemporal patterns by comparing them with metro usage in Shanghai, in order to determine the extent and how the suburban trains divert the passenger flow from taxis. The results identified 12 pick-up and six drop-off hotspots in Shanghai. Overall, the pick-up locations were relatively more concentrated than the drop-off locations. Temporal patterns were also revealed. Passengers on long-distance taxi rides were observed to avoid the rush hours on the street as their first priority and tried to avoid the inconvenience of interchanges on the metro lines as their second priority.

Measurements of Wake-Riding Electrons in Antiproton-Carbon-Foil Collisions

CERN Multimedia

2002-01-01

When a charged particle passes through dielectric media, e.g. a thin carbon foil, a ``wake'' is induced. The characteristic wake-potential shows an oscillatory behaviour, with a wavelength of about $ 2 \\pi v _{p} / \\omega _{p} _{l} $ where $ v _{p} $ is the projectile velocity and $ \\omega _{p} _{l} $ the plasmon energy of the target. This induced wake potential is superimposed on the Coulomb potential of the projectile, the latter leading to a pronounced ``cusp'' of electrons leaving the solid at $ v _{e} app v _{p} $ for positively charged projectiles in the MeV region. Correspondingly, an ``anti-cusp'' is expected for antiprotons. \\\\ \\\\ In the solid, the wake-potential leads to an attractive force on electrons, and a dynamic electronic state is predicted both for proton and antiproton projectiles. In the solid, the wake-riding electrons are travelling with the projectile speed $ v _{p} $ Upon exit of the foil, the electron released from the wake-riding state of an antiproton will suddenly find itself in th...

Experimentally Evoking Nonbelieved Memories for Childhood Events

Science.gov (United States)

Otgaar, Henry; Scoboria, Alan; Smeets, Tom

2013-01-01

We report on the 1st experimental elicitation of nonbelieved memories for childhood events in adults (Study 1) and children (Study 2) using a modified false memory implantation paradigm. Participants received true (trip to a theme park) and false (hot air balloon ride) narratives and recalled these events during 2 interviews. After debriefing, 13%…

Second-order sliding mode control for DFIG-based wind turbines fault ride-through capability enhancement.

Science.gov (United States)

Benbouzid, Mohamed; Beltran, Brice; Amirat, Yassine; Yao, Gang; Han, Jingang; Mangel, Hervé

2014-05-01

This paper deals with the fault ride-through capability assessment of a doubly fed induction generator-based wind turbine using a high-order sliding mode control. Indeed, it has been recently suggested that sliding mode control is a solution of choice to the fault ride-through problem. In this context, this paper proposes a second-order sliding mode as an improved solution that handle the classical sliding mode chattering problem. Indeed, the main and attractive features of high-order sliding modes are robustness against external disturbances, the grids faults in particular, and chattering-free behavior (no extra mechanical stress on the wind turbine drive train). Simulations using the NREL FAST code on a 1.5-MW wind turbine are carried out to evaluate ride-through performance of the proposed high-order sliding mode control strategy in case of grid frequency variations and unbalanced voltage sags. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Electromagnetic validation of fault-ride through capabilities of wind turbines

DEFF Research Database (Denmark)

Arana Aristi, Iván; Garcia-Valle, Rodrigo; Sharma, Ranjan

2010-01-01

Scope of the present project is the development and validation of electro-magnetic transient model of fixed-speed wind turbines. The research work is focused on the development of a fixed-speed wind turbine model with fault-ride through capabilities during transient over-voltages. The model is de...

Coordination of Advertising Free Riding in Hybrid Channel Supply Chain

Directory of Open Access Journals (Sweden)

Jin Sha

2016-01-01

Full Text Available Advertising is a crucial tool for demand creation and market expansion; enterprises in supply chain use it widely to increase sales and improve profits. But the homogeneity of products sold in hybrid channel supply chain magnifies the positive externalities of advertising and leads to serious free-riding problem. To coordinate the supply chain effectively, firstly, this paper classifies hybrid channel supply chain based on the relationship between members and selects horizontally integrated, vertically integrated, and decentralized hybrid channel supply chains as research objects. Then, a demand function considering the common effect of price and advertising is proposed and coordination schemes for different types of supply chains are designed. Finally, a sensitivity analysis is performed to assess the impact of parameters on coordination using orthogonal experiment.

Supercapacitor energy storage system for fault ride-through of a DFIG wind generation system

International Nuclear Information System (INIS)

Rahim, A.H.M.A.; Nowicki, E.P.

2012-01-01

Highlights: ► A detailed dynamic model of a DFIG is developed to study the low voltage ride-through phenomenon. ► A supercapacitor-STATCOM energy storage system is employed. ► Decoupled real and reactive power control strategies implemented on the system. ► The proposed controller show extremely good transient behavior following low voltage conditions. - Abstract: The doubly fed induction generators (DFIGs) are preferred over other variable speed generators because of their advantages in terms of economy and control. One of the problems associated with high wind power penetration DFIG systems, however, is the inability of their converters to work properly under extreme low voltage conditions. This article presents a decoupled P–Q control strategy of a supercapacitor energy storage system, interfaced through a STATCOM, for low voltage ride through as well as damping enhancement of the DFIG system. The STATCOM meets the reactive power need under the depressed voltage condition, while the supercapacitor caters to the real power unbalance. An extensive dynamic model of the DFIG system including a supercapacitor DC–DC buck–boost converter and the STATCOM circuit has been developed. The fault ride-thorough capability of the generator has been investigated for a severe symmetrical three-phase to ground fault on the grid bus. Simulation results suggest that the proposed decoupled control of the supercapacitor STATCOM control strategy can help the DFIG ride through extreme low voltage conditions for significant duration. The proposed control strategy also damps the electromechanical transients, and thus quickly restores normal operation of the converters.

High performance AC–DC control power supply for low voltage ride ...

Indian Academy of Sciences (India)

Ride-Through (LVRT) in solar and wind applications, no work has been ... section 5. Figure 2. Schematic structure of a control power supply used in a HPC. ..... order plant transfer function to first order transfer function. Also, peak current ...

Fault Ride-Through of a Grid-connected Photovoltaic System with Quasi Z Source Inverter

DEFF Research Database (Denmark)

Al-Durra, Ahmed; Fayyad, Yara; Muyeen, S.M.

2016-01-01

This article presents fault ride-through schemes for a three-phase quasi Z source single-stage photovoltaic (PV) inverter that is connected to the grid after the distribution network. The quasi Z source inverter employs a unique LC network to couple the inverter main circuit to the input of the PV...... the grid side so that the grid fault ride-through requirements can be fulfilled. Scheme A involves control modification in the system; Schemes B and C involve hardware modification in the circuit topology by adding a chopper circuit across the DC link in Scheme B and across the quasi Z source inverter...

Undoing Quantitative Easing: Janet Yellen's Tiger Ride

Science.gov (United States)

Niederjohn, M. Scott; Schug, Mark C.; Wood, William C.

2014-01-01

"One who rides a tiger is afraid to dismount," says a colorful proverb from an earlier time. This may be an apt saying for the situation facing the new head of the Federal Reserve, Janet L. Yellen, who takes over at a time when successive rounds of Fed policy have taken the central bank into uncharted territory. By historical standards,…

Zero-Voltage Ride-Through Capability of Single-Phase Grid-Connected Photovoltaic Systems

Directory of Open Access Journals (Sweden)

Zhen Zhang

2017-03-01

Full Text Available Distributed renewable energy systems play an increasing role in today’s energy paradigm. Thus, intensive research activities have been centered on improving the performance of renewable energy systems, including photovoltaic (PV systems, which should be of multiple-functionality. That is, the PV systems should be more intelligent in the consideration of grid stability, reliability, and fault protection. Therefore, in this paper, the performance of single-phase grid-connected PV systems under an extreme grid fault (i.e., when the grid voltage dips to zero is explored. It has been revealed that combining a fast and accurate synchronization mechanism with appropriate control strategies for the zero-voltage ride-through (ZVRT operation is mandatory. Accordingly, the representative synchronization techniques (i.e., the phase-locked loop (PLL methods in the ZVRT operation are compared in terms of detection precision and dynamic response. It shows that the second-order generalized integrator (SOGI-PLL is a promising solution for single-phase systems in the case of fault ride-through. A control strategy by modifying the SOGI-PLL scheme is then introduced to single-phase grid-connected PV systems for ZVRT operation. Simulations are performed to verify the discussions. The results have demonstrated that the proposed method can help single-phase PV systems to temporarily ride through zero-voltage faults with good dynamics.

Park-and-Ride motivations and air quality norms in Europe

NARCIS (Netherlands)

Dijk, Marc; de Haes, Jan; Montalvo, Carlos

2013-01-01

Transport congestion and the quality of the air in cities is a persistent concern for urban planners, and in this context Park and Ride (P. +. R) facilities have been proposed as an element of urban sustainability strategies in many cities in Europe. In 2008 a European Commission directive aimed at

Therapeutic riding followed by rhythmic auditory stimulation to improve balance and gait in a subject with orthopedic pathologies.

Science.gov (United States)

Ungermann, Cathryn M; Gras, Laura Z

2011-12-01

The study objectives were to investigate the effect of therapeutic riding with a subject who had an orthopedic diagnosis. This is a single-subject case report. The study was conducted at an equestrian facility with an indoor riding arena. The subject was a 59-year-old woman with grade I spondylolisthesis at L4/L5 and multilevel lumbar spinal stenosis in central and foraminal canals. The subject had an anterior cervical fusion of C3-C7. The subject has been ambulating with a straight cane due to her history of frequent falls. Gait, agility, strength, range of motion, and balance testing were performed. The subject had impairments of bilateral lower extremities with an ataxic gait pattern and was at risk for continued falls according to the balance measures. The intervention comprised therapeutic riding sessions 3 times a week for 20 minutes for 4 weeks. Each riding session was immediately followed by a 10-minute independent walking program with a metronome for rhythmic auditory stimulation. The outcome measures were as follows: Manual muscle testing and range of motion of the lower extremities, Gait Speed Test, Dynamic Gait Index, Four-Square Step Test, Chair Stand Test, Single Leg Stance. Improvements were seen in lower extremity strength and range of motion and balance. The subject improved on balance scores, placing her out of the risk for falls category. Therapeutic riding followed by rhythmic auditory stimulation improved lower extremity range of motion, strength, and balance with this subject.

Watching Your Back While Riding Your Bike

DEFF Research Database (Denmark)

Sokoler, Tomas; Bagalkot, Naveen

2017-01-01

series of investigations looking into the broader notion of integrating measures for preventive self-care with existing everyday activities (e.g daily motorcycle commute) by means of digital technology. We are guided by the concept of embodied self-monitoring grounded in theories on the embodied...... for interaction design in the domain of preventive self-care. We report on the outcome of in-situ enactments performed by four motorbike riders as co-explorers engaging with our interactive soft&hardware sketches while actually riding in traffic. Insitu enactments and follow-up interviews with the riders...

Kuhu kadus pensionäride kogutud 25 000 allkirja? / Jaanus Kõrv

Index Scriptorium Estoniae

Kõrv, Jaanus

2005-01-01

2003. aasta novembri alguses andsid Eesti Pensionäride Ühenduse esindajad ajalehe Videvik kaasabil üle Riigikogu spiikrile Ene Ergmale pöördumise 25 000 protestiallkirjaga, milles nõuti inimväärset pensioni. Valitsus pole pöördumisele reageerinud

Roller-coaster Ride to, Relief From TMJ | NIH MedlinePlus the Magazine

Science.gov (United States)

... on a roller coaster ride, seeking relief from temporomandibular joint (TMJ) disorder, which causes pain and, sometimes, dysfunction in the jaw joint and muscles of the neck, head, and face. She has endured: excruciating pain ...

Union Free-Riding in Britain and New Zealand

OpenAIRE

Alex Bryson

2006-01-01

The percentage of workers who choose not to join the union available to them at their workplace has been rising in Britain and New Zealand. Social custom, union instrumentality, the fixed costs of joining, employee perceptions of management attitudes to unionization and employee problems at work all influence the propensity to free-ride. Ideological convictions regarding the role of unions also play some role, as do private excludable goods. There is little indication of employer-inspired pol...

Cyclist's nodule: no smooth ride.

Science.gov (United States)

Stoneham, Adam; Thway, Khin; Messiou, Christina; Smith, Myles

2016-03-10

A fit and active amateur cyclist was referred by his general practitioner to a surgical oncology outpatient clinic with a slowly-growing perineal mass. Following clinical examination, the patient underwent imaging and biopsy at a tertiary soft tissue tumour centre, which diagnosed perineal nodular induration: a rare, benign tumour caused by repetitive trauma associated with 'saddle sports' such as cycling or horse riding. It is important to consider soft tissue tumours in patients who present with 'lumps and bumps'; they can occur anywhere in the body including the groin or perineum, where it is sometimes referred to as a 'third' or 'accessory' testicle in men. Although unusual, the case emphasises the importance of rapid specialist referral from primary care, and consideration of a patient's occupation and hobbies when formulating diagnoses. 2016 BMJ Publishing Group Ltd.

Non conventional psychiatric rehabilitation in schizophrenia using therapeutic riding: the FISE multicentre Pindar project

Directory of Open Access Journals (Sweden)

Stefania Cerino

2011-12-01

Full Text Available The FISE (Federazione Italiana Sport Equestri Pindar is a multicentre research project aimed at testing the potential effects of therapeutic riding on schizophrenic patients. Twenty-four subjects with a diagnosis of schizophrenia were enrolled for a 1 year-treatment involving therapeutic riding sessions. All subjects were tested at the beginning and at the end of treatment with a series of validated test batteries (BPRS and 8 items-PANSS. The results discussed in this paper point out an improvement in negative symptoms, a constant disease remission in both early onset and chronic disease subjects, as well as a reduced rate of hospitalization.

Effects of Indoor Horseback Riding and Virtual Reality Exercises on the Dynamic Balance Ability of Normal Healthy Adults

Science.gov (United States)

Lee, Daehee; Lee, Sangyong; Park, Jungseo

2014-01-01

[Purpose] The objective of this study was to determine the effect of indoor horseback riding and virtual reality exercises on the dynamic balance ability of normal adults. [Subjects] This study enrolled 24 normal adults and divided them into two groups: an indoor horseback riding exercise group (IHREG, n = 12) and a virtual reality exercise group (VREG, n = 12). [Methods] IHREG exercised on indoor horseback riding equipment and VREG exercised using the Nintendo Wii Fit three times a week for six weeks. The Biodex Balance System was used to analyze dynamic balance as measured by the overall stability index (OSI), anteroposterior stability index (APSI), and mediolateral stability index (MLSI). [Results] In the within-group comparison, IHREG and VERG both showed significant decreases in the dynamic balance indexes of OSI, APSI, and MLSI after the intervention, but no significant difference was found between the groups. [Conclusion] Both indoor horseback riding and virtual reality exercises were effective at improving the subjects’ dynamic balance ability as measured by OSI, APSI, and MLSI, and can be used as additional exercises for patients with conditions affecting postural control. PMID:25540494

Predictive routing for autonomous mobility-on-demand systems with ride-sharing

NARCIS (Netherlands)

Alonso Mora, J.; Wallar, Alex; Rus, Daniela; Bicchi, A.; Maciejewski, T.

2017-01-01

Ride-sharing, or carpooling, systems with autonomous vehicles will provide efficient and reliable urban mobility on demand. In this work we present a method for dynamic vehicle routing that leverages historical data to improve the performance of a network of self-driving taxis. In particular, we

Traveler Preference for Park-and-Ride Facilities: Empirical Evidence of Generalizability

NARCIS (Netherlands)

Bos, D.M.; Heijden, R.E.C.M. van der; Molin, E.; Timmermans, H.

2005-01-01

This paper reports the main findings of a study, conducted in the Netherlands, aimed at testing whether preference functions for park-and-ride facilities, estimated from data collected in a specific Dutch region, can be generalized to a nationwide sample. Preference data in both samples were

A comparison of optimal semi-active suspension systems regarding vehicle ride comfort

Science.gov (United States)

Koulocheris, Dimitrios; Papaioannou, Georgios; Chrysos, Emmanouil

2017-10-01

The aim of this work is to present a comparison of the main semi active suspension systems used in a passenger car, after having optimized the suspension systems of the vehicle model in respect with ride comfort and road holding. Thus, a half car model, equipped with controllable dampers, along with a seat and a driver was implemented. Semi-active suspensions have received a lot of attention since they seem to provide the best compromise between cost (energy consumption, actuators/sensors hardware) and performance in comparison with active and passive suspensions. In this work, the semi active suspension systems studied are comfort oriented and consist of (a) the two version of Skyhook control (two states skyhook and skyhook linear approximation damper), (b) the acceleration driven damper (ADD), (c) the power driven damper (PDD), (d) the combination of Skyhook and ADD (Mixed Skyhook-ADD) and (e) the combination of the two with the use of a sensor. The half car model equipped with the above suspension systems was excited by a road bump, and was optimized using genetic algorithms (GA) in respect with ride comfort and road holding. This study aims to highlight how the optimization of the vehicle model could lead to the best compromise between ride comfort and road holding, overcoming their well-known trade-off. The optimum results were compared with important performance metrics regarding the vehicle’s dynamic behaviour in general.

Fault Ride Through Enhancement of VSC‐HVDC Connected Offshore Wind Power Plants

DEFF Research Database (Denmark)

Sharma, Ranjan; Wu, Qiuwei; Jensen, Kim Høj

2018-01-01

the model of a VSC‐HVDC‐connected offshore wind power plant (WPP) with an external grid. It proposes a feedforward DC voltage control based FRT technique to control the AC voltage at the WPP collector network during grid‐side faults. Time‐domain simulations have been used to verify the efficacy......Voltage source converter‐high voltage direct current (VSC‐HVDC) connections have become a new trend for long‐distance offshore wind power transmission. In order to facilitate the derivation of the feedforward DC voltage control based fault ride through (FRT) technique, this chapter describes...... of the proposed feedforward DC voltage control based FRT technique for VSC‐HVDC‐connected WPPs. Time‐domain simulation results shows that the proposed FRT scheme can successfully enable VSC‐HVDC‐connected WPPs to ride through balanced and unbalanced faults in host power systems, as well as faults in the WPP...

Solving the Dial-a-Ride Problem using Genetic algorithms

DEFF Research Database (Denmark)

Bergvinsdottir, Kristin Berg; Larsen, Jesper; Jørgensen, Rene Munk

In the Dial-a-Ride problem (DARP) customers send transportation requests to an operator. A request consists of a specified pickup location and destination location along with a desired departure or arrival time and demand. The aim of DARP is to minimize transportation cost while satisfying custom...... routing problems for the vehicles using a routing heuristic. The algorithm is implemented in Java and tested on publicly available data sets....

Experimental modal analysis

Energy Technology Data Exchange (ETDEWEB)

Ibsen, Lars Bo; Liingaard, M.

2006-12-15

This technical report concerns the basic theory and principles for experimental modal analysis. The sections within the report are: Output-only modal analysis software, general digital analysis, basics of structural dynamics and modal analysis and system identification. (au)

New approaches to provide ride-through for critical loads in electric power distribution systems

Science.gov (United States)

Montero-Hernandez, Oscar C.

2001-07-01

The extensive use of electronic circuits has enabled modernization, automation, miniaturization, high quality, low cost, and other achievements regarding electric loads in the last decades. However, modern electronic circuits and systems are extremely sensitive to disturbances from the electric power supply. In fact, the rate at which these disturbances happen is considerable as has been documented in recent years. In response to the power quality concerns presented previously, this dissertation is proposing new approaches to provide ride-through for critical loads during voltage disturbances with emphasis on voltage sags. In this dissertation, a new approach based on an AC-DC-AC system is proposed to provide ride-through for critical loads connected in buildings and/or an industrial system. In this approach, a three-phase IGBT inverter with a built in Dc-link voltage regulator is suitably controlled along with static by-pass switches to provide continuous power to critical loads. During a disturbance, the input utility source is disconnected and the power from the inverter is connected to the load. The remaining voltage in the AC supply is converted to DC and compensated before being applied to the inverter and the load. After detecting normal utility conditions, power from the utility is restored to the critical load. In order to achieve an extended ride-through capability a second approach is introduced. In this case, the Dc-link voltage regulator is performed by a DC-DC Buck-Boost converter. This new approach has the capability to mitigate voltage variations below and above the nominal value. In the third approach presented in this dissertation, a three-phase AC to AC boost converter is investigated. This converter provides a boosting action for the utility input voltages, right before they are applied to the load. The proposed Pulse Width Modulation (PWM) control strategy ensures independent control of each phase and compensates for both single-phase or poly

Re-examination of Chinese semantic processing and syntactic processing: evidence from conventional ERPs and reconstructed ERPs by residue iteration decomposition (RIDE.

Directory of Open Access Journals (Sweden)

Fang Wang

Full Text Available A number of studies have explored the time course of Chinese semantic and syntactic processing. However, whether syntactic processing occurs earlier than semantics during Chinese sentence reading is still under debate. To further explore this issue, an event-related potentials (ERPs experiment was conducted on 21 native Chinese speakers who read individually-presented Chinese simple sentences (NP1+VP+NP2 word-by-word for comprehension and made semantic plausibility judgments. The transitivity of the verbs was manipulated to form three types of stimuli: congruent sentences (CON, sentences with a semantically violated NP2 following a transitive verb (semantic violation, SEM, and sentences with a semantically violated NP2 following an intransitive verb (combined semantic and syntactic violation, SEM+SYN. The ERPs evoked from the target NP2 were analyzed by using the Residue Iteration Decomposition (RIDE method to reconstruct the ERP waveform blurred by trial-to-trial variability, as well as by using the conventional ERP method based on stimulus-locked averaging. The conventional ERP analysis showed that, compared with the critical words in CON, those in SEM and SEM+SYN elicited an N400-P600 biphasic pattern. The N400 effects in both violation conditions were of similar size and distribution, but the P600 in SEM+SYN was bigger than that in SEM. Compared with the conventional ERP analysis, RIDE analysis revealed a larger N400 effect and an earlier P600 effect (in the time window of 500-800 ms instead of 570-810ms. Overall, the combination of conventional ERP analysis and the RIDE method for compensating for trial-to-trial variability confirmed the non-significant difference between SEM and SEM+SYN in the earlier N400 time window. Converging with previous findings on other Chinese structures, the current study provides further precise evidence that syntactic processing in Chinese does not occur earlier than semantic processing.

Are all-terrain vehicle riders willing to pay trail user fees to ride on public lands in the USA?

Science.gov (United States)

Stephanie A. Snyder; Robert A. Smail

2009-01-01

Some public lands in the USA offer opportunities for all-terrain vehicle (ATV) riding, but few charge trail use fees. In a case study in the US state of Wisconsin, the contingent valuation method was used to examine riders' willingness to pay (WTP) to ride on public lands. Information on riders' habits, preferences and responses to a dichotomous choice WTP...

Gust Wind Effects on Stability and Ride Quality of Actively Controlled Maglev Guideway Systems

Directory of Open Access Journals (Sweden)

Dong-Ju Min

2017-01-01

Full Text Available The purpose of this paper is to present a framework to analyze the interaction between an actively controlled magnetic levitation vehicle and a guideway structure under gusty wind. The equation of motion is presented for a 30-dof maglev vehicle model consisting of one cabin and four bogies. In addition, a lateral electromagnetic suspension (EMS system is introduced to improve the running safety and ride quality of the maglev vehicle subjected to turbulent crosswind. By using the developed simulation tools, the effects of various parameters on the dynamic response of the vehicle and guideway are investigated in the case of the UTM maglev vehicle running on a simply supported guideway and cable-stayed guideway. The simulation results show that the independent lateral EMS and associated control scheme are definitely helpful in improving the running safety and ride quality of the vehicle under gusty wind. In the case of the cable-stayed guideway, at low wind speed, vehicle speed is the dominant factor influencing the dynamic responses of the maglev vehicle and the guideway, but at wind speed over 10 m/s, wind becomes the dominant factor. For the ride quality of the maglev vehicle, wind is also the most influential factor.

The effect of cannabis on regular cannabis consumers' ability to ride a bicycle.

Science.gov (United States)

Hartung, Benno; Schwender, Holger; Roth, Eckhard H; Hellen, Florence; Mindiashvili, Nona; Rickert, Annette; Ritz-Timme, Stefanie; Grieser, Almut; Monticelli, Fabio; Daldrup, Thomas

2016-05-01

To assess the effects of cannabis on the ability required to ride a bicycle, repetitive practical cycling tests and medical examinations were carried out before and after inhalative consumption of cannabis. A maximum of three joints with body weight-adapted THC content (300 μg THC per kg body weight) could be consumed by each test subject. Fourteen regular cannabis-consuming test subjects were studied (12 males, 2 females). In summary, only a few driving faults were observed even under the influence of very high THC concentrations. A defined THC concentration that leads to an inability to ride a bicycle cannot be presented. The test subjects showed only slight distinctive features that can be documented using a medical test routinely run for persons under suspicion of driving under the influence of alcohol or drugs.

Low-Voltage Ride-Through Operation of Power Converters in Grid-Interactive Microgrids by Using Negative-Sequence Droop Control

DEFF Research Database (Denmark)

Zhao, Xin; Guerrero, Josep M.; Savaghebi, Mehdi

2017-01-01

of the utility grid during grid faults. In this paper, a LVRT control strategy based on positive/negative sequence droop control is proposed for grid-interactive MGs to ride-through voltage sags with not only inductive/resistive, but also complex line impedance. By using the proposed control strategy, MGs can......Due to the increasing penetration level of microgrids (MGs), it becomes a critical issue for MGs to help sustaining power system stability. Therefore, ancillary services, such as the low-voltage ride-through (LVRT) capability should be incorporated in MGs in order to guarantee stable operation...... support the grid voltage, make profits, and also ride-through the voltage dip during the whole fault period. A two layer hierarchical control strategy is proposed in this paper. The primary controller consists of voltage and current inner loops, a conventional droop control and a virtual impedance loop...

Assessing the impacts of mountain biking and hiking on subalpine grassland in Australia using an experimental protocol.

Science.gov (United States)

Pickering, Catherine Marina; Rossi, Sebastian; Barros, Agustina

2011-12-01

Mountain biking is an increasingly popular, but sometimes controversial, activity in protected areas. Limited research on its impacts, including studies comparing biking with hiking, contributes to the challenges for mangers in assessing its appropriateness. The impacts of mountain bike riding off trail were compared to those of hiking on subalpine grassland in Australia using a modification of a common trampling experimental methodology. Vegetation and soil parameters were measured immediately and two weeks after different intensities of mountain biking (none, 25, 75, 200 and 500 passes across slope, 200 pass up and down slope) and hiking (200 and 500 passes across slope). There were reductions in vegetation height, cover and species richness, as well as changes in species composition and increases in litter and soil compaction with riding. Riding up and down a moderate slope had a greater impact than riding across the slope. Hiking also affected vegetation height, cover and composition. Mountain biking caused more damage than hiking but only at high use (500 passes). Further research including other ecosystems, topography, styles of riding, and weather conditions are required, but under the conditions tested here, hiking and mountain biking appear to be similar in their environmental impacts. Copyright © 2011 Elsevier Ltd. All rights reserved.

Riding Quality Model for Asphalt Pavement Monitoring Using Phase Array Type L-band Synthetic Aperture Radar (PALSAR

Directory of Open Access Journals (Sweden)

Kamiya Yoshikazu

2010-11-01

Full Text Available There are difficulties associated with near-real time or frequent pavement monitoring, because it is time consuming and costly. This study aimed to develop a binary logit model for the evaluation of highway riding quality, which could be used to monitor pavement conditions. The model was applied to investigate the influence of backscattering values of Phase Array type L-band Synthetic Aperture Radar (PALSAR. Training data obtained during 3–7 May 2007 was used in the development process, together with actual international roughness index (IRI values collected along a highway in Ayutthaya province, Thailand. The analysis showed that an increase in the backscattering value in the HH or the VV polarization indicated the poor condition of the pavement surface and, of the two, the HH polarization is more suitable for developing riding quality evaluation. The model developed was applied to analyze highway number 3467, to demonstrate its capability. It was found that the assessment accuracy of the prediction of the highway level of service was 97.00%. This is a preliminary study of the proposed technique and more intensive investigation must be carried out using ALOS/PALSAR images in various seasons.

Using forecast information for storm ride-through control

DEFF Research Database (Denmark)

Barahona Garzón, Braulio; Trombe, Pierre-Julien; Vincent, Claire Louise

2013-01-01

Using probabilistic forecast information in control algorithms can improve the performance of wind farms during periods of extreme winds. This work presents a wind farm supervisor control concept that uses probabilistic forecast information to ride-through a storm with softer ramps of power. Wind...... speed forecasts are generated with a statistical approach (i.e. time series models). The supervisor control is based on a set of logical rules that consider point forecasts and predictive densities to ramp-down the power of the wind farm before the storm hits. The potential of this supervisor control...

Aging effect on plasma metabolites and hormones concentrations in riding horses

Directory of Open Access Journals (Sweden)

K. Kawasumi

2015-11-01

Full Text Available Age effects on plasma metabolites, hormone concentrations, and enzyme activities related to energy metabolism were investigated in 20 riding horses. Animals were divided into two groups: Young (3-8 years and aged (11-18 years. They were clinically healthy, and not obese. Plasma adiponectin (ADN concentrations in aged horses were significantly lower than those in young horses (mean±SE, 6.5±1.3 μg mL-1 vs, 10.9±1.7 μg mL-1, Mann-Whitney U test, respectively; P=0.0233. Plasma non-esterified fatty acid levels and Insulin and malondialdehyde concentrations in aged group tended to increase compared to those in young group although there were not significant differences statistically. In aged group, malate dehydrogenase/lactate dehydrogenase (M/L ratio, which is considered an energy metabolic indicator, did not change significantly compared to that in young group. Present data suggest that aging may negatively affect nutrition metabolism, but not induce remarkable changes in M/L ratio in riding horses.

Ride Your Luck! A Field Experiment on Lottery-Based Incentives for Compliance

NARCIS (Netherlands)

M. Fabbri (Marco); P.N. Barbieri (Paolo); M. Bigoni (Maria)

2016-01-01

textabstractWe designed a natural-field experiment in the context of local public transportation to test whether rewards in the form of lottery prizes coupled with traditional sanctions efficiently reduce free-riding. We organized a lottery in a medium-size Italian city the participation in which is

Cognition and relative importance underlying consumer valuation of park-and-ride facilities

NARCIS (Netherlands)

Bos, D.M.; Molin, E.J.E.; Timmermans, H.J.P.; vd Heijden, R.E.C.M.

2003-01-01

Results are reported of a study designed to identify the cognitive constructs underlying the valuation of park-and-ride (P&R) facilities and to measure the relative importance attached to the attributes of such facilities. Results show that the reliability of public transport is quite important.

Low Voltage Ride-Through Capability of a Single-Stage Single-Phase Photovoltaic System Connected to the Low-Voltage Grid

DEFF Research Database (Denmark)

Yang, Yongheng; Blaabjerg, Frede

2013-01-01

The progressively growing of single-phase photovoltaic (PV) systems makes the Distribution System Operators (DSO) to update or revise the existing grid codes in order to guarantee the availability, quality and reliability of the electrical system. It is expected that the future PV systems connected...... to the low-voltage grid will be more active with functionalities of low voltage ride-through (LVRT) and the grid support capability, which is not the case today. In this paper, the operation principle is demonstrated for a single-phase grid-connected PV system in low voltage ride through operation in order...... to map future challenges. The system is verified by simulations and experiments. Test results show that the proposed power control method is effective and the single-phase PV inverters connected to low-voltage networks are ready to provide grid support and ride-through voltage fault capability...

The high-riding superior aortic recess of the pericardium: MRI visualization in a child

International Nuclear Information System (INIS)

Cohen, Mervyn; Johnson, Tiffanie; Hoyer, Mark

2005-01-01

We report a 4-year-old child with a high-riding superior aortic recess of the pericardium, initially misdiagnosed as a possible vascular malformation. The anatomy of the pericardial recesses is reviewed. (orig.)

Developing a model-based decision support system for call-a-ride paratransit service problems.

Science.gov (United States)

2011-02-01

Paratransit is the transportation service that supplements larger public transportation : systems by providing individualized rides without fixed routes or timetables. In 1990, : the Americans with Disabilities Act (ADA) was passed which allows passe...

Identifying the psychological determinants of risky riding: an application of an extended Theory of Planned Behaviour.

Science.gov (United States)

Chorlton, Kathryn; Conner, Mark; Jamson, Samantha

2012-11-01

The Theory of Planned Behaviour (TPB) plus moral norms, anticipated regret, past behaviour, self-identity and perceived susceptibility was applied to predicting motorcyclists' intention to ride above the speed limit and ride at inappropriate speeds. Past behaviour, control beliefs, attitudes, moral norm, normative beliefs, age and self-identity explained 60% of the variance in motorcyclists' intention to exceed the speed limit on motorways (N=1381). A total of 62% of the variance in motorcyclists' intention to really go for it on rural roads was accounted for, with past behaviour, attitudes, control beliefs, age, normative beliefs, anticipated regret, self-identity, behavioural beliefs and training status being significant (N=1116). Finally, attitudes, past behaviour, control beliefs, moral norm, anticipated regret, behavioural beliefs, normative beliefs, engine size and self-identity explained 57% of the variance in motorcyclists' intention to ride faster than felt safe in order to keep up with the group (N=1940). The belief-based measures also successfully differentiated between those who intended to speed and those who did not. Theoretical and practical implications of the findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Effects of Hippotherapy and a Horse Riding Simulator on the Balance of Children with Cerebral Palsy

Science.gov (United States)

Lee, Chae-Woo; Kim, Seong Gil; Na, Sang Su

2014-01-01

[Purpose] We with respect to their effects on the compared hippotherapy with a horseback riding simulator (JOBA, Panasonic Inc. JP) static and dynamic balance of children with cerebral palsy (CP). [Subjects and Methods] Twenty-six children were randomly divided into two groups: a hippotherapy group that included 13 children, and a horseback riding simulator (JOBA, Panasonic Inc., Japan) group, which was also composed of 13 children. The two groups participated in 1 hour of exercise per day, 3 times a week, for 12 weeks. The subjects’ static balance ability was measured using BPM (software 5.3, SMS Healthcare Inc., UK) as the center of pressure sway length while standing for 30 seconds with their eyes open and looking to the front. Dynamic balance ability was measured using the PBS (Pediatric Balance Scale). [Results] Both groups showed significant improvements in static and dynamic balance but significant differences between the two groups were not found. [Conclusion] The horseback riding simulator could be a useful alternative to hippotherapy for the improvement of static and dynamic balance of children with CP. PMID:24707098

Solving the Dial-a-Ride Problem using Genetic Algorithms

DEFF Research Database (Denmark)

Jørgensen, Rene Munk; Larsen, Jesper; Bergvinsdottir, Kristin Berg

2007-01-01

In the Dial-a-Ride problem (DARP), customers request transportation from an operator. A request consists of a specified pickup location and destination location along with a desired departure or arrival time and capacity demand. The aim of DARP is to minimize transportation cost while satisfying ...... routing problems for the vehicles using a routing heuristic. The algorithm is implemented in Java and tested on publicly available data sets. The new solution method has achieved solutions comparable with the current state-of-the-art methods....

An adaptive Phase-Locked Loop algorithm for faster fault ride through performance of interconnected renewable energy sources

DEFF Research Database (Denmark)

Hadjidemetriou, Lenos; Kyriakides, Elias; Blaabjerg, Frede

2013-01-01

Interconnected renewable energy sources require fast and accurate fault ride through operation in order to support the power grid when faults occur. This paper proposes an adaptive Phase-Locked Loop (adaptive dαβPLL) algorithm, which can be used for a faster and more accurate response of the grid...... side converter control of a renewable energy source, especially under fault ride through operation. The adaptive dαβPLL is based on modifying the control parameters of the dαβPLL according to the type and voltage characteristic of the grid fault with the purpose of accelerating the performance...

Negative Sequence Droop Method based Hierarchical Control for Low Voltage Ride-Through in Grid-Interactive Microgrids

DEFF Research Database (Denmark)

Zhao, Xin; Firoozabadi, Mehdi Savaghebi; Quintero, Juan Carlos Vasquez

2015-01-01

. In this paper, a voltage support strategy based on negative sequence droop control, which regulate the positive/negative sequence active and reactive power flow by means of sending proper voltage reference to the inner control loop, is proposed for the grid connected MGs to ride through voltage sags under...... complex line impedance conditions. In this case, the MGs should inject a certain amount of positive and negative sequence power to the grid so that the voltage quality at load side can be maintained at a satisfied level. A two layer hierarchical control strategy is proposed in this paper. The primary...... control loop consists of voltage and current inner loops, conventional droop control and virtual impedance loop while the secondary control loop is based on positive/negative sequence droop control which can achieve power injection under voltage sags. Experimental results with asymmetrical voltage sags...

RIDES: Robust Intrusion Detection System for IP-Based Ubiquitous Sensor Networks.

Science.gov (United States)

Amin, Syed Obaid; Siddiqui, Muhammad Shoaib; Hong, Choong Seon; Lee, Sungwon

2009-01-01

The IP-based Ubiquitous Sensor Network (IP-USN) is an effort to build the "Internet of things". By utilizing IP for low power networks, we can benefit from existing well established tools and technologies of IP networks. Along with many other unresolved issues, securing IP-USN is of great concern for researchers so that future market satisfaction and demands can be met. Without proper security measures, both reactive and proactive, it is hard to envisage an IP-USN realm. In this paper we present a design of an IDS (Intrusion Detection System) called RIDES (Robust Intrusion DEtection System) for IP-USN. RIDES is a hybrid intrusion detection system, which incorporates both Signature and Anomaly based intrusion detection components. For signature based intrusion detection this paper only discusses the implementation of distributed pattern matching algorithm with the help of signature-code, a dynamically created attack-signature identifier. Other aspects, such as creation of rules are not discussed. On the other hand, for anomaly based detection we propose a scoring classifier based on the SPC (Statistical Process Control) technique called CUSUM charts. We also investigate the settings and their effects on the performance of related parameters for both of the components.

Therapeutic Effects of Mechanical Horseback Riding on Gait and Balance Ability in Stroke Patients

Science.gov (United States)

Han, Jun Young; Kim, Shin Kyoung; Chung, Jin Sang; Lee, Hyun-Cheol; Lim, Jae Kuk; Lee, Jiwon; Park, Kawn Yong

2012-01-01

Objective To investigate the therapeutic effects of mechanical horseback riding for gait and balance parameters in post-stroke patients. Method This study was a non randomized prospective positive-controlled trial over a 12 week period. From May 2011 to October 2011, 37 stroke patients were recruited from our outpatient clinic and divided into two groups. The control group received the conventional physiotherapy while the intervention group received the conventional physiotherapy along with mechanical horseback riding therapy for 12 weeks. Outcome measurements of gait included the Functional Ambulation Category (FAC) and gait part of the Performance Oriented Mobility Assessment (G-POMA) while those of balance included the Berg Balance Scale (BBS) and the balance part of the Performance Oriented Mobility Assessment (B-POMA). These measurements were taken before and after treatment. Results There were no significant differences in the baseline characteristics and initial values between the two groups. When comparing baseline and 12 weeks post treatment in each group, the intervention group showed significant improvement on BBS (39.9±5.7 → 45.7±4.8, p=0.001) and B-POMA (10.4±2.6 → 12.6±2.1, p=0.001), but significant improvement on gait parameters. When comparing the groups, the dynamic balance category of BBS in post treatment showed significant difference (p=0.02). Conclusion This study suggests that mechanical horseback riding therapy may be an effective treatment tool for enhancing balance in adults with stroke. PMID:23342307

Control Strategy of Three-Phase Photovoltaic Inverter under Low-Voltage Ride-Through Condition

Directory of Open Access Journals (Sweden)

Xianbo Wang

2015-01-01

Full Text Available The new energy promoting community has recently witnessed a surge of developments in photovoltaic power generation technologies. To fulfill the grid code requirement of photovoltaic inverter under low-voltage ride-through (LVRT condition, by utilizing the asymmetry feature of grid voltage, this paper aims to control both restraining negative sequence current and reactive power fluctuation on grid side to maintain balanced output of inverter. Two mathematical inverter models of grid-connected inverter containing LCL grid-side filter under both symmetrical and asymmetric grid are proposed. PR controller method is put forward based on inverter model under asymmetric grid. To ensure the stable operation of the inverter, grid voltage feedforward method is introduced to restrain current shock at the moment of voltage drop. Stable grid-connected operation and LVRT ability at grid drop have been achieved via a combination of rapid positive and negative sequence component extraction of accurate grid voltage synchronizing signals. Simulation and experimental results have verified the superior effectiveness of our proposed control strategy.

Influence of Crowbar and Chopper Protection on DFIG during Low Voltage Ride Through

Directory of Open Access Journals (Sweden)

Rita M. Monteiro Pereira

2018-04-01

Full Text Available The energy sector is evolving rapidly, namely due to the increasing importance of renewable energy sources. The connection of large amounts of wind power generation poses new challenges for the dynamic voltage stability analysis of an electric power system, which has to be studied. In this paper, the traditional Doubly-Fed Induction Generator model is employed. Based on this model, a crowbar and chopper circuit is set up to protect the turbine during the short-circuit period. The EUROSTAG software package was used for the simulation studies of the system, and numerical results were obtained. Conclusions are drawn that provide a better understanding of the influence of crowbar and chopper protection on Doubly-Fed Induction Generators (DFIG, during low voltage ride through, in a system with wind power generation.

Second-Order Free-Riding on Antisocial Punishment Restores the Effectiveness of Prosocial Punishment

Science.gov (United States)

Szolnoki, Attila; Perc, Matjaž

2017-10-01

Economic experiments have shown that punishment can increase public goods game contributions over time. However, the effectiveness of punishment is challenged by second-order free-riding and antisocial punishment. The latter implies that noncooperators punish cooperators, while the former implies unwillingness to shoulder the cost of punishment. Here, we extend the theory of cooperation in the spatial public goods game by considering four competing strategies, which are traditional cooperators and defectors, as well as cooperators who punish defectors and defectors who punish cooperators. We show that if the synergistic effects are high enough to sustain cooperation based on network reciprocity alone, antisocial punishment does not deter public cooperation. Conversely, if synergistic effects are low and punishment is actively needed to sustain cooperation, antisocial punishment does is viable, but only if the cost-to-fine ratio is low. If the costs are relatively high, cooperation again dominates as a result of spatial pattern formation. Counterintuitively, defectors who do not punish cooperators, and are thus effectively second-order free-riding on antisocial punishment, form an active layer around punishing cooperators, which protects them against defectors that punish cooperators. A stable three-strategy phase that is sustained by the spontaneous emergence of cyclic dominance is also possible via the same route. The microscopic mechanism behind the reported evolutionary outcomes can be explained by the comparison of invasion rates that determine the stability of subsystem solutions. Our results reveal an unlikely evolutionary escape from adverse effects of antisocial punishment, and they provide a rationale for why second-order free-riding is not always an impediment to the evolutionary stability of punishment.

Second-Order Free-Riding on Antisocial Punishment Restores the Effectiveness of Prosocial Punishment

Directory of Open Access Journals (Sweden)

Attila Szolnoki

2017-10-01

Full Text Available Economic experiments have shown that punishment can increase public goods game contributions over time. However, the effectiveness of punishment is challenged by second-order free-riding and antisocial punishment. The latter implies that noncooperators punish cooperators, while the former implies unwillingness to shoulder the cost of punishment. Here, we extend the theory of cooperation in the spatial public goods game by considering four competing strategies, which are traditional cooperators and defectors, as well as cooperators who punish defectors and defectors who punish cooperators. We show that if the synergistic effects are high enough to sustain cooperation based on network reciprocity alone, antisocial punishment does not deter public cooperation. Conversely, if synergistic effects are low and punishment is actively needed to sustain cooperation, antisocial punishment does is viable, but only if the cost-to-fine ratio is low. If the costs are relatively high, cooperation again dominates as a result of spatial pattern formation. Counterintuitively, defectors who do not punish cooperators, and are thus effectively second-order free-riding on antisocial punishment, form an active layer around punishing cooperators, which protects them against defectors that punish cooperators. A stable three-strategy phase that is sustained by the spontaneous emergence of cyclic dominance is also possible via the same route. The microscopic mechanism behind the reported evolutionary outcomes can be explained by the comparison of invasion rates that determine the stability of subsystem solutions. Our results reveal an unlikely evolutionary escape from adverse effects of antisocial punishment, and they provide a rationale for why second-order free-riding is not always an impediment to the evolutionary stability of punishment.

Therapist-Designed Adaptive Riding in Children With Cerebral Palsy : Results of a Feasibility Study

NARCIS (Netherlands)

Angsupaisal, Mattana; Visser, Baudina; Alkema, Anne; Meinsma-van der Tuin, Marja; Maathuis, Carel G. B.; Reinders-Messelink, Heleen; Hadders-Algra, Mijna

Background. It is debatable whether adaptive riding (AR) in children with cerebral palsy (CP) improves postural control and gross motor development. Objective. The study aim was to explore the feasibility of an extensive assessment protocol for a randomized controlled trial of therapist-designed

The Ride of the Kings in Vlčnov from the Perspective of Contemporary Research

Czech Academy of Sciences Publication Activity Database

Stavělová, Daniela

2015-01-01

Roč. 25, č. 5 (2015), s. 47-64 ISSN 0862-8351 Institutional support: RVO:68378076 Keywords : Ride of the Kings * field research * methodology * festival * traditional custom * Vlčnov Subject RIV: AC - Archeology, Anthropology, Ethnology

RIDES: Robust Intrusion Detection System for IP-Based Ubiquitous Sensor Networks

Directory of Open Access Journals (Sweden)

Sungwon Lee

2009-05-01

Full Text Available TheIP-based Ubiquitous Sensor Network (IP-USN is an effort to build the “Internet of things”. By utilizing IP for low power networks, we can benefit from existing well established tools and technologies of IP networks. Along with many other unresolved issues, securing IP-USN is of great concern for researchers so that future market satisfaction and demands can be met. Without proper security measures, both reactive and proactive, it is hard to envisage an IP-USN realm. In this paper we present a design of an IDS (Intrusion Detection System called RIDES (Robust Intrusion DEtection System for IP-USN. RIDES is a hybrid intrusion detection system, which incorporates both Signature and Anomaly based intrusion detection components. For signature based intrusion detection this paper only discusses the implementation of distributed pattern matching algorithm with the help of signature-code, a dynamically created attack-signature identifier. Other aspects, such as creation of rules are not discussed. On the other hand, for anomaly based detection we propose a scoring classifier based on the SPC (Statistical Process Control technique called CUSUM charts. We also investigate the settings and their effects on the performance of related parameters for both of the components.

Low-voltage ride-through of a droop-based three-phase four-wire grid-connected microgrid

DEFF Research Database (Denmark)

Sadeghkhani, Iman; Golshan, Mohamad Esmail Hamedani; Mehrizi-Sani, Ali

2018-01-01

system operations during abnormal grid conditions. The objective of this paper is to propose an LVRT scheme that improves the power quality of the entire microgrid. The developed method is implemented as the controller of the interface voltage-sourced converter (VSC) of a distributed energy resource...... control of each phase and does not require calculation of symmetrical components. Moreover, it can be employed in the VSC control systems with various reference frames and is effective for droop-based grid-connected microgrids with both single-phase and three-phase four-wire configurations. The proposed......The ability of riding through the grid disturbances can increase the integration of microgrids into the distribution system. Consequently, a grid-connected microgrid should provide ancillary services such as low voltage ride-through (LVRT) capability and reactive power support to sustain the power...

Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

Directory of Open Access Journals (Sweden)

Hongye Gou

2018-04-01

Full Text Available In this study, a dynamic response analysis procedure is proposed and applied to investigate the dynamic responses of a straddle-type concrete-filled steel tube tied arch bridge under train and truck loadings. A numerical model of the coupled monorail train–bridge system is established to investigate the dynamic behaviors of the bridge under moving trains. A refined three-dimensional finite element model is built for the bridge and a 15 degrees-of-freedom vehicle model is presented for the train. The numerical model is validated using in-situ test results and then used to analyze the dynamic displacement and acceleration of the bridge and the trains on the bridge. Based on the simulation results, the impact factor of the bridge is investigated and the riding comfort of the trains is evaluated. The investigation results show that the impact factor of vehicle loads reaches the maximum value when the resonance of the bridge is induced by the moving vehicles. The effect of train braking predominates the longitudinal vibration of the bridge but is negligible in the transverse and vertical directions. The vehicle speed is the dominating factor for the riding comfort of the train.

Comparing the impacts of hiking, skiing and horse riding on trail and vegetation in different types of forest.

Science.gov (United States)

Törn, A; Tolvanen, A; Norokorpi, Y; Tervo, R; Siikamäki, P

2009-03-01

Nature-based tourism in protected areas has increased and diversified dramatically during the last decades. Different recreational activities have a range of impacts on natural environments. This paper reports results from a comparison of the impacts of hiking, cross-country skiing and horse riding on trail characteristics and vegetation in northern Finland. Widths and depths of existing trails, and vegetation on trails and in the neighbouring forests were monitored in two research sites during 2001 and 2002. Trail characteristics and vegetation were clearly related to the recreational activity, research site and forest type. Horse trails were as deep as hiking trails, even though the annual number of users was 150-fold higher on the hiking trails. Simultaneously, cross-country skiing had the least effect on trails due to the protective snow cover during winter. Hiking trail plots had little or no vegetation cover, horse riding trail plots had lower vegetation cover than forest plots, while skiing had no impact on total vegetation cover. On the other hand, on horse riding trails there were more forbs and grasses, many of which did not grow naturally in the forest. These species that were limited to riding trails may change the structure of adjacent plant communities in the long run. Therefore, the type of activities undertaken and the sensitivity of habitats to these activities should be a major consideration in the planning and management of nature-based tourism. Establishment of artificial structures, such as stairs, duckboards and trail cover, or complete closure of the site, may be the only way to protect the most sensitive or deteriorated sites.

A behavioral choice model of the use of car-sharing and ride-sourcing services

Energy Technology Data Exchange (ETDEWEB)

Dias, Felipe F.; Lavieri, Patrícia S.; Garikapati, Venu M.; Astroza, Sebastian; Pendyala, Ram M.; Bhat, Chandra R.

2017-07-26

There are a number of disruptive mobility services that are increasingly finding their way into the marketplace. Two key examples of such services are car-sharing services and ride-sourcing services. In an effort to better understand the influence of various exogenous socio-economic and demographic variables on the frequency of use of ride-sourcing and car-sharing services, this paper presents a bivariate ordered probit model estimated on a survey data set derived from the 2014-2015 Puget Sound Regional Travel Study. Model estimation results show that users of these services tend to be young, well-educated, higher-income, working individuals residing in higher-density areas. There are significant interaction effects reflecting the influence of children and the built environment on disruptive mobility service usage. The model developed in this paper provides key insights into factors affecting market penetration of these services, and can be integrated in larger travel forecasting model systems to better predict the adoption and use of mobility-on-demand services.

Coordinated Low Voltage Ride through strategies for Permanent Magnet Direct Drive Synchronous Generators

Directory of Open Access Journals (Sweden)

Zhang Ge

2016-01-01

Full Text Available By analyzing the mechanism of the low voltage ride through on the permanent magnet direct drive synchronous wind power generating units, this paper proposes a coordinated control strategy for permanent magnet synchronous generator. In order to avoid over speed operation of the generation units, over voltage on DC capacitor and over current on convert, the improved pitch angle control and inverter control are used. When the grid voltage drops, the captured wind power is cut down by the variable pitch system, which limits the speed of the generator, the generator side converter keeps the DC capacitor voltage stabile; and the grid side converter provides reactive power to the grid to help the grid voltage recover. The control strategy does not require any additional hardware equipment, with existing control means, the unit will be able to realize low voltage ride through. Finally, based on Matlab/Simulink to build permanent magnet direct drive wind power generation system, the simulation results verify the correctness and effectiveness of the control strategy.

A First Step toward the Understanding of Implicit Learning of Hazard Anticipation in Inexperienced Road Users Through a Moped-Riding Simulator

Directory of Open Access Journals (Sweden)

Mariaelena Tagliabue

2017-05-01

Full Text Available Hazard perception is considered one of the most important abilities in road safety. Several efforts have been devoted to investigating how it improves with experience and can be trained. Recently, research has focused on the implicit aspects of hazard detection, reaction, and anticipation. In the present study, we attempted to understand how the ability to anticipate hazards develops during training with a moped-riding simulator: the Honda Riding Trainer (HRT. Several studies have already validated the HRT as a tool to enhance adolescents’ hazard perception and riding abilities. In the present study, as an index of hazard anticipation, we used skin conductance response (SCR, which has been demonstrated to be linked to affective/implicit appraisal of risk. We administered to a group of inexperienced road users five road courses two times a week apart. In each course, participants had to deal with eight hazard scenes (except one course that included only seven hazard scenes. Participants had to ride along the HRT courses, facing the potentially hazardous situations, following traffic rules, and trying to avoid accidents. During the task, we measured SCR and monitored driving performance. The main results show that learning to ride the simulator leads to both a reduction in the number of accidents and anticipation of the somatic response related to hazard detection, as proven by the reduction of SCR onset recorded in the second session. The finding that the SCR signaling the impending hazard appears earlier when the already encountered hazard situations are faced anew suggests that training with the simulator acts on the somatic activation associated with the experience of risky situations, improving its effectiveness in detecting hazards in advance so as to avoid accidents. This represents the starting point for future investigations into the process of generalization of learning acquired in new virtual situations and in real-road situations.

Rüütel pensionäride elujärje garandina / Janno Reiljan

Index Scriptorium Estoniae

Reiljan, Janno, 1951-2018

2006-01-01

Ilmunud ka: Severnoje Poberezhje (2006) 17. aug., lk. 2, Meie Maa (2006) 18. aug., lk. 2, Nädaline (2006) 22. aug., lk. 2, Vooremaa (2006) 22. aug., lk. 2, Valgamaalane (2006) 24. aug., lk. 2. Autor selgitab Eesti pensionäride elujärje kujunemise näitel, miks Rahvaliit ja Keskerakond nimetasid oma koostöölepingu garandiks president Arnold Rüütli

Modified Ride-On Cars and Young Children with Disabilities: Effects of Combining Mobility and Social Training

Directory of Open Access Journals (Sweden)

Hsiang-Han Huang

2018-01-01

Full Text Available BackgroundResearch has shown that the use of power mobility devices is safe and beneficial for motor and cognitive development in children with motor disabilities; nevertheless, strong evidence of the benefits for social skill development is limited. This study aimed to examine the effects of combining ride-on car training with an adult-directed, social interaction program in a hospital-based environment on mobility and social functions in young children with motor disabilities.MethodsThis study used a prospective, nonequivalent pretest–posttest control group design. Twenty-nine young children with motor disabilities, aged between 1 and 3 years, were recruited from local hospitals in Taiwan. The treatment group (n = 15 underwent 2-h ride-on car training sessions twice per week for a total of 9 weeks in the hospital environment. The control group (n = 14 underwent a 9-week home education program (mean: 200 min/week focusing on mobility and social skills training. The Chinese version of the Pediatric Evaluation of Disability Inventory, Parenting Stress Index, and Goal Attainment Scaling were administered to all participants before and after the intervention, and at the end of the 9-week follow-up phase.ResultsMobility and social functions significantly improved in both groups after the 9-week intervention, but this improvement was not maintained at the follow-up phase. The treatment group showed significantly better improvement in social function, parenting stress levels, and goal achievement than the control group at posttest.ConclusionThis two-group design study showed the benefits of combining a ride-on car use with a family-centered, structured, social interaction program for positive impacts on mobility, social function, and parenting stress levels. The combination of a modified ride-on car and a social training program has the potential to enhance socialization in young children with motor disabilities.Clinical Trial

Stability of a Light Sail Riding on a Laser Beam

Energy Technology Data Exchange (ETDEWEB)

Manchester, Zachary [John A. Paulson School of Engineering and Applied Science, Harvard University, 60 Oxford St., Cambridge, MA 02138 (United States); Loeb, Abraham, E-mail: zmanchester@seas.harvard.edu [Astronomy Department, Harvard University, 60 Garden St., Cambridge, MA 02138 (United States)

2017-03-10

The stability of a light sail riding on a laser beam is analyzed both analytically and numerically. Conical sails on Gaussian beams, which have been studied in the past, are shown to be unstable without active control or additional mechanical modifications. A new architecture for a passively stable sail-and-beam configuration is proposed. The novel spherical shell design for the sail is capable of “beam riding” without the need for active feedback control. Full three-dimensional ray-tracing simulations are performed to verify our analytical results.

Stability of a Light Sail Riding on a Laser Beam

International Nuclear Information System (INIS)

Manchester, Zachary; Loeb, Abraham

2017-01-01

The stability of a light sail riding on a laser beam is analyzed both analytically and numerically. Conical sails on Gaussian beams, which have been studied in the past, are shown to be unstable without active control or additional mechanical modifications. A new architecture for a passively stable sail-and-beam configuration is proposed. The novel spherical shell design for the sail is capable of “beam riding” without the need for active feedback control. Full three-dimensional ray-tracing simulations are performed to verify our analytical results.

A Low-Voltage Ride-Through Control Strategy for Three-Phase Grid-Connected PV Systems

DEFF Research Database (Denmark)

Afshari, Ehsan; Farhangi, Babak; Yang, Yongheng

2017-01-01

similar variations in the dc-link voltage of conventional two-stage PV inverters. In such systems with an electrolytic capacitor in the dc-link, the oscillations of the dc-link voltage with DGF can deteriorate the capacitor lifetime, and thus the entire system. The proposed Low-Voltage Ride-Through (LVRT...

Low voltage ride through strategies for SCIG wind turbines in distributed power generation systems

DEFF Research Database (Denmark)

Blaabjerg, Frede; Teodorescu, Remus; Rodriguez, Pedro

2008-01-01

Fulfilling the new grid codes constitutes one of the main challenges for the wind power industry, that is specially concerned about the new fault-ride-through requirements. Enhancing the operation of wind-turbines in front of grid faults is not only an important issue for new wind farms, but also...

A Comprehensive Review of Low-Voltage-Ride-Through Methods for Fixed-Speed Wind Power Generators

DEFF Research Database (Denmark)

Moghadasi, Amirhasan; Sarwat, Arif; Guerrero, Josep M.

2016-01-01

This paper presents a comprehensive review of various techniques employed to enhance the low voltage ride through (LVRT) capability of the fixed-speed induction generators (FSIGs)-based wind turbines (WTs), which has a non-negligible 20% contribution of the existing wind energy in the world...

Speech Auditory Alerts Promote Memory for Alerted Events in a Video-Simulated Self-Driving Car Ride.

Science.gov (United States)

Nees, Michael A; Helbein, Benji; Porter, Anna

2016-05-01

Auditory displays could be essential to helping drivers maintain situation awareness in autonomous vehicles, but to date, few or no studies have examined the effectiveness of different types of auditory displays for this application scenario. Recent advances in the development of autonomous vehicles (i.e., self-driving cars) have suggested that widespread automation of driving may be tenable in the near future. Drivers may be required to monitor the status of automation programs and vehicle conditions as they engage in secondary leisure or work tasks (entertainment, communication, etc.) in autonomous vehicles. An experiment compared memory for alerted events-a component of Level 1 situation awareness-using speech alerts, auditory icons, and a visual control condition during a video-simulated self-driving car ride with a visual secondary task. The alerts gave information about the vehicle's operating status and the driving scenario. Speech alerts resulted in better memory for alerted events. Both auditory display types resulted in less perceived effort devoted toward the study tasks but also greater perceived annoyance with the alerts. Speech auditory displays promoted Level 1 situation awareness during a simulation of a ride in a self-driving vehicle under routine conditions, but annoyance remains a concern with auditory displays. Speech auditory displays showed promise as a means of increasing Level 1 situation awareness of routine scenarios during an autonomous vehicle ride with an unrelated secondary task. © 2016, Human Factors and Ergonomics Society.

Individual differences in behavioural inhibition explain free riding in public good games when punishment is expected but not implemented

Science.gov (United States)

2013-01-01

Background The literature on social dilemmas and punishment focuses on the behaviour of the punisher. However, to fully explain the effect of punishment on cooperation, it is important to understand the psychological mechanisms influencing the behaviour of those who expect to be punished. This paper examines whether the expectation of punishment, rather than the implementation of punishment is sufficient to prevent individuals from free riding. Individual differences in the punishment sensitivity have been linked to both threat responses (flight, fight, fear system, or the FFFS) and to the response to the uncertainty of punishment (BIS-anxiety).The paper, therefore, examines if individual differences in BIS-anxiety and FFFS can explain some of the variability in free riding in the face of implemented and non-implemented punishment. Methods Participants took part in a series of one-shot Public Goods Games (PGGs) facing two punishment conditions (implemented and non-implemented) and two standard non-punishment PGGs. The punishment was implemented as a centralized authority punishment (i.e., if one participant contributed less than their group members, they were automatically fined). Individual contribution levels and presence/absence of zero contributions indexed free riding. Individual differences in behavioural inhibition were assessed. Results Individuals contributed more under the threat of punishment (both implemented and non-implemented). However, individuals contributed less when the punishment was not implemented compared to when it was. Those scoring high in BIS-anxiety contributed more when the punishment expectations were not implemented. This effect was not observed for FFFS. Conclusion Supporting previous research, punishment had a powerful effect in increasing contribution levels in the PGGs. However, when expected punishment was not implemented, individual differences in punishment sensitivity, specifically in BIS-anxiety, were related to fewer

Individual differences in behavioural inhibition explain free riding in public good games when punishment is expected but not implemented

Directory of Open Access Journals (Sweden)

Skatova Anya

2013-01-01

Full Text Available Abstract Background The literature on social dilemmas and punishment focuses on the behaviour of the punisher. However, to fully explain the effect of punishment on cooperation, it is important to understand the psychological mechanisms influencing the behaviour of those who expect to be punished. This paper examines whether the expectation of punishment, rather than the implementation of punishment is sufficient to prevent individuals from free riding. Individual differences in the punishment sensitivity have been linked to both threat responses (flight, fight, fear system, or the FFFS and to the response to the uncertainty of punishment (BIS-anxiety.The paper, therefore, examines if individual differences in BIS-anxiety and FFFS can explain some of the variability in free riding in the face of implemented and non-implemented punishment. Methods Participants took part in a series of one-shot Public Goods Games (PGGs facing two punishment conditions (implemented and non-implemented and two standard non-punishment PGGs. The punishment was implemented as a centralized authority punishment (i.e., if one participant contributed less than their group members, they were automatically fined. Individual contribution levels and presence/absence of zero contributions indexed free riding. Individual differences in behavioural inhibition were assessed. Results Individuals contributed more under the threat of punishment (both implemented and non-implemented. However, individuals contributed less when the punishment was not implemented compared to when it was. Those scoring high in BIS-anxiety contributed more when the punishment expectations were not implemented. This effect was not observed for FFFS. Conclusion Supporting previous research, punishment had a powerful effect in increasing contribution levels in the PGGs. However, when expected punishment was not implemented, individual differences in punishment sensitivity, specifically in BIS-anxiety, were

Therapeutic Riding for a Student with Multiple Disabilities and Visual Impairment: A Case Study.

Science.gov (United States)

Lehrman, Jennifer; Ross, David B.

2001-01-01

A 9-year-old with multiple disabilities and visual impairments was the focus of a 10-week developmental therapeutic riding program incorporating hippotherapy. The program has led to increased mobility, an increase in visual attention span and fixation time, signs of greater verbal communication, and the acquisition of new functional signs.…

Challenges to Grid Synchronization of Single-Phase Grid-Connected Inverters in Zero-Voltage Ride-Through Operation

DEFF Research Database (Denmark)

Zhang, Zhen; Yang, Yongheng; Blaabjerg, Frede

2016-01-01

With the fast development in Photovoltaic (PV) technology, the relevant grid-connection requirements/standards are continuously being updated, and more challenges have been imposed on both single-phase and three-phase grid-connected PV systems. For instance, PV systems are currently required...... to remain connected under grid voltage sags (even zero voltage condition). In this case, much attention should be paid to the grid synchronization in such a way to properly ride-through grid faults. Thus, in this paper, the most commonly-used and recently-developed Phase Locked Loop (PLL) synchronization...... methods have been evaluated for single-phase grid-connected PV systems in the case of Zero-Voltage Ride-Through (ZVRT) operation. The performances of the prior-art PLL methods in response to zero voltage faults in terms of detection precision and dynamic response are assessed in this paper. Simulation...

How challenging is a riding horse’s life? Field studies on fitness, workload and welfare

NARCIS (Netherlands)

Munsters, C.C.B.M.

2013-01-01

The objectives of this thesis were to evaluate in practice workload, fitness and welfare of riding horses under work and training conditions. Chapter II presents an overview of the parameters used in earlier studies on training, behaviour and equine welfare, and describes the evaluation of the

A Low-Voltage Ride-Through Technique for Grid-Connected Converters with Reduced Power Transistors Stress

DEFF Research Database (Denmark)

Chen, Hsin-Chih; Lee, Chia-Tse; Cheng, Po-Tai

2016-01-01

With more and more distributed energy resources being installed in the utility grid, grid operators start imposing the low-voltage ride-through requirement on such systems to remain grid-connected and inject reactive and/or active current to support grid voltage during fault conditions. This pape...

Management of lower extremity riding lawn mower injuries in children.

Science.gov (United States)

Kroening, L; Davids, J R

2000-01-01

Eight children are injured by riding lawn mowers every day. The child, usually a bystander or passenger on the mower, can sustain life-threatening and limb-threatening injuries. Multidisciplinary care must be available to manage the numerous issues presented by the unique circumstance of a child with a severe injury in the acute and chronic settings. Whether the limb is salvaged or amputated, the ultimate goal is optimal functional outcome for the patient. We have developed a team approach to address these injuries from their onset until patient maturity, maximizing our ability to achieve this goal.

76 FR 61279 - Defense Federal Acquisition Regulation Supplement; Defense Cargo Riding Gang Member (DFARS Case...

Science.gov (United States)

2011-10-04

... that the language of the proposed clause be amended to read as follows to reinforce DoD's role in the... Military Sealift Command), and specific procedural guidance for DoD personnel obtaining the background... 247.5. B. Language Inconsistency Comment: DFARS 252.247-7027(a) defines ``riding gang member'' as it...

Texas hospitals riding tall. While hospitals post robust profit margins, HMOs are saddled with mounting losses.

Science.gov (United States)

Saphir, A

1999-02-08

In Texas, they do things differently, and they do things big. Hospitals in the Lone Star State have been banding together more often and more effectively than elsewhere. Swinging their lassos, they are riding herd on HMOs, enjoying record profits and making ever-larger deals.

Data Analysis in Experimental Biomedical Research

DEFF Research Database (Denmark)

Markovich, Dmitriy

This thesis covers two non-related topics in experimental biomedical research: data analysis in thrombin generation experiments (collaboration with Novo Nordisk A/S), and analysis of images and physiological signals in the context of neurovascular signalling and blood flow regulation in the brain...... to critically assess and compare obtained results. We reverse engineered the data analysis performed by CAT, a de facto standard assay in the field. This revealed a number of possibilities to improve its methods of data analysis. We found that experimental calibration data is described well with textbook...

Why People Are Not Willing to Let Their Children Ride in Driverless School Buses: A Gender and Nationality Comparison

Directory of Open Access Journals (Sweden)

Emily C. Anania

2018-02-01

Full Text Available As driverless vehicles proliferate, it is possible that this technology will be applied in mass transport vehicles. School buses may be suited for autonomous operations as they follow set routes and schedules. However, a research gap exists in whether or not parents would be willing to have their children ride in autonomously operated school buses. The purpose of this study was to examine parents’ willingness to allow their child to ride in an autonomous school bus. Participant gender and nationality were also two independent variables, along with affect measures as a possible mediating variable. The research used a two-study approach. In study one, it was found that participants were less willing to have their child ride in a driverless school bus than a traditional human-operated vehicle. In study two, findings suggest a significant interaction between the type of driver, participant gender, and nationality. In general, American females were less willing than Indian females and overall, Americans were less willing than Indians in the driverless conditions. Affect was found to be a mediating variable, which suggests that emotions were playing a role in the responses of participants. The paper concludes with theoretical contributions, practical applications, and suggestions for future research.

[Prevention of injuries associated with horseback riding].

Science.gov (United States)

ten Kate, Chantal A; de Kooter, Tabitha A; Kramer, William L M

2015-01-01

Each year 9,900 equestrians present at Accident and Emergency Departments, 40% of them 10-19 year old females. The most common horse-riding injuries are to the head, brain, neck and face, torso and extremities. Because of the relatively larger head, children more often fall on their head. Wearing a helmet gives considerable protection. Despite the common use of a helmet by horseback riders, serious head injury still occurs regularly. Further research into improvement of the protective function of the helmet is indicated. The current safety vest (body protector) does not significantly reduce the risk of torso injury. Improvement of its protective function is necessary. Injury to the lower extremities is caused when they become trapped in the stirrup in a fall from or with the horse. Safety stirrups and sturdy footwear are possible preventive measures. Investment in the quality and promotion of preventive measures could reduce the frequency and severity of equestrian injuries.

Active power control strategies for inverter-based distributed power generation adapted to grid-fault ride-through requirements

NARCIS (Netherlands)

Wang, F.; Duarte, J.L.; Hendrix, M.A.M.

2009-01-01

Distributed power generation is expected to deliver power into the grid without interruption during voltage dips. To improve system ride-through capabilities, a generalized active power control strategy is proposed for grid-interfacing inverters. Specifically, a current reference generation strategy

Integrating stochastic time-dependent travel speed in solution methods for the dynamic dial-a-ride problem.

Science.gov (United States)

Schilde, M; Doerner, K F; Hartl, R F

2014-10-01

In urban areas, logistic transportation operations often run into problems because travel speeds change, depending on the current traffic situation. If not accounted for, time-dependent and stochastic travel speeds frequently lead to missed time windows and thus poorer service. Especially in the case of passenger transportation, it often leads to excessive passenger ride times as well. Therefore, time-dependent and stochastic influences on travel speeds are relevant for finding feasible and reliable solutions. This study considers the effect of exploiting statistical information available about historical accidents, using stochastic solution approaches for the dynamic dial-a-ride problem (dynamic DARP). The authors propose two pairs of metaheuristic solution approaches, each consisting of a deterministic method (average time-dependent travel speeds for planning) and its corresponding stochastic version (exploiting stochastic information while planning). The results, using test instances with up to 762 requests based on a real-world road network, show that in certain conditions, exploiting stochastic information about travel speeds leads to significant improvements over deterministic approaches.

Compression fractures of the vertebrae during a "bumpy" boat ride.

LENUS (Irish Health Repository)

Chukwunyerenwa, C K

2012-01-31

INTRODUCTION: Compression fracture of the vertebrae is common, often the result of falls from height and motor vehicle accidents in the younger age groups. It can occur following minor trauma in the elderly and in those with osteoporosis. MATERIALS AND METHODS: We present an interesting case of compression fracture of the vertebral bodies occurring simultaneously in a couple during a boat ride while on holiday. One individual had fracture of the T8, while the other fractured the L1 vertebrae. Both injuries were treated conservatively with Taylor braces. CONCLUSION: We highlight one of the potential hazards of this recreational activity, and the almost identical fracture pattern in this couple.

Rapid emergence of free-riding behavior in new pediatric immunization programs.

Directory of Open Access Journals (Sweden)

Chris T Bauch

Full Text Available BACKGROUND: Mathematical models have formalized how free-rider effects can threaten the stability of high vaccine coverage levels under established voluntary vaccination programs. However, little research has addressed the question of when free-riding begins to develop when a new vaccine is first introduced in a population. METHODOLOGY/PRINCIPAL FINDINGS: Here, we combine a game theoretical model of vaccinating behavior with an age-structured compartmental model to analyze rational vaccinating behavior in the first years of a universal immunization program, where a new vaccine is free to all children of a specified age. The model captures how successive birth cohorts face different epidemiological landscapes that have been shaped by the vaccinating decisions of previous birth cohorts, resulting in a strategic interaction between individuals in different birth cohorts. The model predicts a Nash equilibrium coverage level of for the first few birth cohorts under the new program. However, free-riding behavior emerges very quickly, with the Nash equilibrium vaccine coverage dropping significantly within 2-5 years after program initiation. Subsequently, a rich set of coupled dynamics between infection prevalence and vaccinating behaviors is possible, ranging from relatively stable (but reduced coverage in later birth cohorts to wide fluctuations in vaccine coverage from one birth cohort to the next. Individual tolerance for vaccine risk also starts out at relatively high levels before dropping significantly within a few years. CONCLUSIONS/SIGNIFICANCE: These results suggest that even relatively new immunization programs can be vulnerable to drops in vaccine coverage caused by vaccine scares and exacerbated by herd immunity effects, necessitating vigilance from the start.

An Active Seat Controller with Vehicle Suspension Feedforward and Feedback States: An Experimental Study

Directory of Open Access Journals (Sweden)

Abdulaziz Alfadhli

2018-04-01

Full Text Available Active seat suspensions can be used to reduce the harmful vertical vibration of a vehicle’s seat by applying an external force using a closed loop controller. Many of the controllers found in the literature are difficult to implement practically, because they are based on using unavailable or difficult and costly measurements. This paper presents both simulation and experimental studies of five novel, simple, and cost-effective control strategies to be used for an active seat suspension in order to improve ride comfort at low frequencies below 20 Hz. These strategies use available and measurable feedforward (preview information states from the vehicle secondary suspension, as well as feedback states from the seat suspension, together with gains optimised to minimise the occupant vibration. The gains were optimised using a genetic algorithm (GA, with a fitness function based on the seat effective amplitude transmissibility (SEAT factor. Constraints on the control force and the seat suspension stroke were also included in the optimisation algorithm. Simulation and laboratory experimental tests were carried out to assess the performance of the proposed controllers according to the ISO 2631-1 standard, in both the frequency and time domains with a range of different road profiles. The experimental tests were performed using a multi-axis simulation table (MAST and a physical active seat suspension configured as a hardware-in-loop (HIL simulation with a virtual linear quarter vehicle model (QvM. The results demonstrate that the proposed controllers substantially attenuate the vertical vibration at the driver’s seat compared with both a passive and a proportional-integral-derivative (PID active seat suspension and thus improve ride comfort together with reducing vibration-linked health risks. Moreover, experimental results show that employing both feedforward information and feedback vehicle body and seat acceleration signals in the controller

Contribution games and the end-game effect: When things get real - An experimental analysis

OpenAIRE

Bar-El, Ronen; Tobol, Yossi

2013-01-01

We conduct a contribution game for a real public good and show that when the contributors value the real public good highly, they increase their contributions in each round. Thus, contrary to previous literature, free riding decreases over rounds and the end-game effect is reversed.

Come on and take a free ride : Contributing to public goods in native and foreign language settings

NARCIS (Netherlands)

Urbig, Diemo; Terjesen, Siri; Procher, Vivien; Muehlfeld, Katrin; Van Witteloostuijn, Arjen

2016-01-01

Business schools around the world must prepare their students for two realities: operating in an English-speaking business world and working in teams. As yet, there is limited understanding of how operating in a native or a foreign language impacts students' propensity to free ride in group

Come on and take a free ride : Contributing to public goods in native and foreign language settings

NARCIS (Netherlands)

Urbig, D.; Terjesen, S.; Procher, V.; Muhlfeld, K.S.; van Witteloostuijn, A.

Business schools around the world must prepare their students for two realities: operating in an English-speaking business world and working in teams. As yet, there is limited understanding of how operating in a native or a foreign language impacts students' propensity to free ride in group

How much can you drink before driving? The influence of riding with impaired adults and peers on the driving behaviors of urban and rural youth.

Science.gov (United States)

Leadbeater, Bonnie J; Foran, Kathleen; Grove-White, Aidan

2008-04-01

Following an ecological model to specify risks for impaired driving, we assessed the effects of youth attitudes about substance use and their experiences of riding in cars with adults and peers who drove after drinking alcohol or smoking cannabis on the youths' own driving after drinking or using cannabis. Participants were 2594 students in grades 10 and 12 (mean age = 16 years and 2 months; 50% girls) from public high schools in urban (994) and rural communities (1600) on Vancouver Island in British Columbia, Canada; 1192 of these were new drivers with restricted licenses. Self-report data were collected in anonymous questionnaires. Regression analyses were used to assess the independent and interacting effects of youth attitudes about substance use and their experiences of riding in cars with adults or peers who drove after drinking alcohol or smoking cannabis on youth driving. Youth driving risk behaviors were associated independently with their own high-risk attitudes and experiences riding with peers who drink alcohol or use cannabis and drive. However, risks were highest for the youth who also report more frequent experiences of riding with adults who drink alcohol or use cannabis and drive. Prevention efforts should be expanded to include the adults and peers who are role models for new drivers and to increase youths' awareness of their own responsibilities for their personal safety as passengers.

Ride-sharing business model for sustainability in developing country: Case Study Nebengers, Indonesia

Science.gov (United States)

Asirin, Asirin; Azhari, Danang

2018-05-01

The growth of population and urban economy increased the need for humans’ mobility to support their activities. On the other hand, online Information and Communication Technology (ICT) is growing rapidly and more affordable. Within few years, there is some sharing economy business formed by using online platform. This condition brings through the emergence of ride-sharing business model using an online platform which can be beneficial to sustainability. This research aims to explore one of ridesharing business models which use the online platform and its impact on sustainability. This research used the procedure of case study method with a single case study of Nebengers. This research explores the case study with the scope of this research is limited by using several conceptual frameworks, they are sharing economy business model, four elements of a business model for sustainability (BMfS), Social Construction of Technology (SCoT), sustainable mobility and agency theory. Nebengers is a sharing economy business using online platform that historically can be explained using Social Construction of Technology (SCoT) Theory. There are conflicts between nebengers entrepreneur and the city government. Nebengers disrupts traditional and formal public transportation services which are managed by the government. However, nebengers also contributes to achieve the city government goal in developing sustainable mobility. The future challenge is how to arrange ride-sharing collaborative governance business model for sustainability in the cities in Indonesia.

Long-term bicycle riding ameliorates the depression of the patients undergoing hemodialysis by affecting the levels of interleukin-6 and interleukin-18

Directory of Open Access Journals (Sweden)

Zhao C

2016-12-01

Full Text Available Chunhui Zhao, Hui Ma, Lei Yang, Yong Xiao Blood Purification Center, The First Affiliated Hospital of Dalian Medical University, Dalian, People’s Republic of China Purpose: Hemodialysis patients with depression have a higher risk of death and hospitalization. Although there is pharmacological management for the depression of hemodialysis patients, the adverse effect of the drug limits the use. The nonpharmacological way, bicycle riding, may be an effective way for the therapy of the depression in hemodialysis patients. However, the underlying mechanism of this relationship is still not fully explained, while interleukin-6 (IL-6 and interleukin-18 (IL-18 are associated with depression and exercise. Thus, the effects of bicycle riding on the levels of the interleukin were explored. Participants and methods: One hundred and eighty-nine patients with chronic hemodialysis were selected and randomly assigned to three groups of medicine (MG, received 20-mg escitalopram daily, medicine and aerobic exercise (MAG, received 20-mg escitalopram daily and bicycle riding six times weekly, and only aerobic exercise (AG, received 20-mg placebo daily and bicycle riding six times weekly. The whole experiment lasted for 18 weeks. The quality of life (36-Item Short Form Health Survey and depression severity according to criteria in the Diagnostic and Statistical Manual of Mental Disorders, fourth edition [DSM-IV] were measured before and at the end of this study. The serum levels of IL-6 and IL-18 were measured by an enzyme-linked immunosorbent assay kit. Results: The quality of life was improved and depression severity was reduced significantly in the MAG and AG groups when compared with the MG group (P<0.05. Serum levels of IL-6 and IL-18 were the highest in the MG group, moderate in the MAG group and the lowest in AG group. On the other hand, the serum levels of IL-6 and IL-18 were closely associated with depression scores (P<0.05. Conclusion: Aerobic exercise

Effects of the Horse Riding Simulator and Ball Exercises on Balance of the Elderly

Science.gov (United States)

Kim, SeongGil; Yuk, Goon-chang; Gak, Hwangbo

2013-01-01

[Purpose] The aim of this study was to examine the effects of horse riding exercise using a horse riding simulator (HRS) and a ball on static and dynamic balance of elderly people. [Methods] Thirty-two elderly people hospitalized in geriatric hospitals were randomly assigned to the HRS exercise group or the ball exercise groups, and they performed exercise for eight weeks. [Results] The length of postural sway during quite standing with and without eyes closed significantly decreased in both groups after the exercises and there was no significant difference between both groups in the Romberg test. In the functional reach test (FRT), there were significant increases in distance in both groups after the exercises, and the distance of the HRS exercise group was significantly greater than that of the ball exercise group. In the Timed Up & Go test (TUG) and Timed 10-meter walk test (10MWT), the time significantly decreased in both groups, and there was a more significant decrease in the HRS exercise group than in the ball exercise group. [Conclusion] The results of this study indicate that HRS and ball exercises may improve the balance and gait ability of elderly people hospitalized in nursing homes or geriatric hospitals. PMID:24396203

Thermal Optimized Operation of the Single-Phase Full-Bridge PV Inverter under Low Voltage Ride-Through Mode

DEFF Research Database (Denmark)

Wang, Huai; Yang, Yongheng; Blaabjerg, Frede

2013-01-01

The efficiency of 98% has been reported on transformer-less photovoltaic (PV) inverters and the penetration of grid-connected PV systems is booming as well. In the future, the PV systems are expected to contribute to the grid stability by means of low voltage ride-through operation and grid suppo...

Analysis of DCA experimental data

International Nuclear Information System (INIS)

Min, B. J.; Kim, S. Y.; Ryu, S. J.; Seok, H. C.

2000-01-01

The lattice characteristics of DCA are calculated with WIMS-ATR code to validate WIMS-AECL code for the lattice analysis of CANDU core by using experimental data of DCA at JNC. Analytical studies of some critical experiments had been performed to analyze the effects of fuel composition. Different items of reactor physics such as local power peaking factor (LPF), effective multiplication factor (Keff) and coolant void reactivity were calculated for two coolant void fractions (0% and 100%). LPFs calculated by WIMS-ATR code are in close agreement with the experimental results. LPFs calculated by WIMS-AECL code with WINFRITH and ENDF/B-V libraries have similar values for both libraries but the differences between experimental data and calculated results by WIMS-AECL code are larger than those of WIMS-ATR code. The maximum difference between the values calculated by WIMS-ATR and experimental values of LPFs are within 1.3%. The coupled code systems WIMS-ATR and CITATION used in this analysis predict Keff within 1% ΔK and coolant void reactivity within 4 % ΔK/K in all cases. The coolant void reactivity of uranium fuel is found to be positive. To validate WIMS-AECL code, the core characteristics of DCA shall be calculated by WIMS-AECL and CITATION codes in the future

Effect of therapeutic horseback riding on balance in community-dwelling older adults with balance deficits.

Science.gov (United States)

Homnick, Douglas N; Henning, Kim M; Swain, Charlene V; Homnick, Tamara D

2013-07-01

Falls are an important cause of morbidity in older adults. Equine-assisted activities including therapeutic riding (TR) benefit balance and neuromuscular control in patients with neurological disabilities but have not been systematically studied in older adults at greater risk for falls due to balance deficits. The effect of an 8-week TR program on measures of balance and quality of life in community-dwelling older adults with established balance deficits was evaluated. This was a pretest-post-test single-group trial of a TR program on measures of balance and quality of life. The study was conducted at a Professional Association of Therapeutic Horsemanship (PATH) International Premier riding center. The subjects comprised 9 adults (5 female, 4 males) with a mean age 76.4 years (range 71-83 years). This included an 8-week observation period followed by an 8-week TR program consisting of 1 hour per week of supervised horseback riding and an 8-week follow-up period. SUBJECTS received balance testing at weeks 0, 8, 16, and 24 using the Fullerton Advanced Balance Scale (FABS), and quality of life was measured at weeks 8 and 16 using the Rand SF (short form) 36 quality-of-life measure. OUTCOME MEASURES were change in the FABS and Rand SF 36. There was no significant difference in balance scores between the start and end of the observation period. There was a significant improvement in the balance score and perception of general health from the start to the end of the intervention period, and no significant difference between the end of the intervention and the end of study, suggesting that improvements may have been sustained. TR is a safe activity for older adults with mild to moderate balance deficits and leads to both improvements in balance and quality of life. Longer and larger studies to assess the benefit of equine-assisted activities on improvements in balance and reduction in fall risk are needed.

Aktsiaseltsi aktsionäride, asutajate, juhatuse ja nõukogu liikmete vastutus : [bakalaureusetöö] / Kristi Relvik ; Õigusinstituut ; juhendaja: Kilvar Kessler

Index Scriptorium Estoniae

Relvik, Kristi

1998-01-01

Aktsionäride vastutus, asutajate vastutus, juhatuse ja liikmete vastutus.Vt. ka Relvik, Kristi. Aktsiaseltsi juhatuse ja nõukogu liikmete vastutus // Õigusinstituudi toimetised (1998) nr. 1, lk. 12

The effect of robo-horseback riding therapy on spinal alignment and associated muscle size in MRI for a child with neuromuscular scoliosis: an experimenter-blind study.

Science.gov (United States)

Lee, Dong Ryul; Lee, Nam Gi; Cha, Hyun Jung; Yun Sung, O; You, Sung Joshua Hyun; Oh, Jin Hwan; Bang, Hyo Seong

2011-01-01

This case study was conducted to highlight the clinical and radiological features of a patient with progressive neuromuscular scoliosis before and after robo-horseback riding therapy (HBRT). A clinical, laboratory, and radiological analysis of a single case. An 11-year-old child, dignosed right thoracolumbar neuromuscular scoliosis secondary to cerebral palsy. The child received a 5-week course of robo-HBRT, comprising of 60-minute periods a day, five times a week. Postural alignment was determined by Cobb's method. A real-time magnetic resonance imaging (MRI) was performed to determine the robo-HBRT-induced changes in cross-sectional area (CSA) of bilateral thoracic (T2) and lumbar (L2) paraspinalis. Clinical tests including the standard Gross Motor Function Measure (GMFM) and manual muscle testing (MMT) with the Lafayette Manual Muscle Tester were used to compare the intervention-related changes in motor performance and power. The surface EMG was also used to examine therapy-induced changes in muscle activity amplitude for bilateral T2 and L2 paraspinalis and rectus abdominis muscles. Clinical motor and strength scores increased after the intervention. Radiographic Cobb's angle, MRI, and electromyographic amplitude data demonstrated notably enhanced spinal alignment and muscle fiber CSA and symmetry, respectively. This is the first study to provide evidence of the therapeutic efficacy of a novel form of robo-HBRT on motor function and associated structural and motor control improvements, thus suggesting a method of augmenting therapy in neuromuscular scoliosis.

Riding the waves of culture understanding cultural diversity in business

CERN Document Server

Trompenaars, Fons

1993-01-01

The definitive guide to cross-cultural management--updated to help you lead effectively during a time of unprecedented globalization First published nearly 20 years ago, Riding the Waves of Culture became the standard guide to conducting business in an international context. Now, the third edition provides you with important new information and groundbreaking methods for leading effectively in the most globalized business landscape ever. Fons Trompenaars is a world expert on international management and founder and director of Trompenaars Hampden-Turner (THT), a consulting firm in the field of intercultural management. Charles Hampden-Turner is a Senior Research Associate at the Judge Business School at the University of Cambridge and cofounder and Director of Research and Development at the Trompenaars-Hampden-Turner Group.

An Inquiry-Oriented Approach to Span and Linear Independence: The Case of the Magic Carpet Ride Sequence

Science.gov (United States)

Wawro, Megan; Rasmussen, Chris; Zandieh, Michelle; Sweeney, George Franklin; Larson, Christine

2012-01-01

In this paper we present an innovative instructional sequence for an introductory linear algebra course that supports students' reinvention of the concepts of span, linear dependence, and linear independence. Referred to as the Magic Carpet Ride sequence, the problems begin with an imaginary scenario that allows students to build rich imagery and…

Comparativa de diferentes tipos de efemérides GNSS en cálculo de grandes líneas base con Magnet Office.

OpenAIRE

Pou Peña, Guillermo

2016-01-01

El objetivo de este Trabajo de Fin de Grado es hallar la influencia de cada tipo de efeméride en la precisión a posteriori de las coordenadas de un punto de la línea base. Para ello, se plantea una comparativa entre líneas base en función de la longitud, la duración de la sesión, la constelación y el tipo de efemérides. Todo ello, eligiendo puntos de control en la Península Ibérica y contrastando las soluciones sobre el marco de referencia ETRS89. No se pretende buscar la máxima precisión ...

Novel scheme for enhancement of fault ride-through capability of doubly fed induction generator based wind farms

International Nuclear Information System (INIS)

Vinothkumar, K.; Selvan, M.P.

2011-01-01

Research highlights: → Proposed Fault ride-through (FRT) scheme for DFIG is aimed at energy conservation. → The input mechanical energy is stored during fault and utilized at fault clearance. → Enhanced Rotor speed stability of DFIG. → Reduced Reactive power requirement and rapid voltage recovery at fault clearance. → Improved post fault performance of DFIG at fault clearance. -- Abstract: Enhancement of fault ride-through (FRT) capability and subsequent improvement of rotor speed stability of wind farms equipped with doubly fed induction generator (DFIG) is the objective of this paper. The objective is achieved by employing a novel FRT scheme with suitable control strategy. The proposed FRT scheme, which is connected between the rotor circuit and dc link capacitor in parallel with Rotor Side Converter, consists of an uncontrolled rectifier, two sets of IGBT switches, a diode and an inductor. In this scheme, the input mechanical energy of the wind turbine during grid fault is stored and utilized at the moment of fault clearance, instead of being dissipated in the resistors of the crowbar circuit as in the existing FRT schemes. Consequently, torque balance between the electrical and mechanical quantities is achieved and hence the rotor speed deviation and electromagnetic torque fluctuations are reduced. This results in reduced reactive power requirement and rapid reestablishment of terminal voltage on fault clearance. Furthermore, the stored electromagnetic energy in the inductor is transferred into the dc link capacitor on fault clearance and hence the grid side converter is relieved from charging the dc link capacitor, which is very crucial at this moment, and this converter can be utilized to its full capacity for rapid restoration of terminal voltage and normal operation of DFIG. Extensive simulation study carried out employing PSCAD/EMTDC software vividly demonstrates the potential capabilities of the proposed scheme in enhancing the performance of

Novel scheme for enhancement of fault ride-through capability of doubly fed induction generator based wind farms

Energy Technology Data Exchange (ETDEWEB)

Vinothkumar, K. [Department of Electrical and Electronics Engineering, National Institute of Technology, Tiruchirappalli, Tamilnadu 620015 (India); Selvan, M.P., E-mail: selvanmp@nitt.ed [Department of Electrical and Electronics Engineering, National Institute of Technology, Tiruchirappalli, Tamilnadu 620015 (India)

2011-07-15

Research highlights: {yields} Proposed Fault ride-through (FRT) scheme for DFIG is aimed at energy conservation. {yields} The input mechanical energy is stored during fault and utilized at fault clearance. {yields} Enhanced Rotor speed stability of DFIG. {yields} Reduced Reactive power requirement and rapid voltage recovery at fault clearance. {yields} Improved post fault performance of DFIG at fault clearance. -- Abstract: Enhancement of fault ride-through (FRT) capability and subsequent improvement of rotor speed stability of wind farms equipped with doubly fed induction generator (DFIG) is the objective of this paper. The objective is achieved by employing a novel FRT scheme with suitable control strategy. The proposed FRT scheme, which is connected between the rotor circuit and dc link capacitor in parallel with Rotor Side Converter, consists of an uncontrolled rectifier, two sets of IGBT switches, a diode and an inductor. In this scheme, the input mechanical energy of the wind turbine during grid fault is stored and utilized at the moment of fault clearance, instead of being dissipated in the resistors of the crowbar circuit as in the existing FRT schemes. Consequently, torque balance between the electrical and mechanical quantities is achieved and hence the rotor speed deviation and electromagnetic torque fluctuations are reduced. This results in reduced reactive power requirement and rapid reestablishment of terminal voltage on fault clearance. Furthermore, the stored electromagnetic energy in the inductor is transferred into the dc link capacitor on fault clearance and hence the grid side converter is relieved from charging the dc link capacitor, which is very crucial at this moment, and this converter can be utilized to its full capacity for rapid restoration of terminal voltage and normal operation of DFIG. Extensive simulation study carried out employing PSCAD/EMTDC software vividly demonstrates the potential capabilities of the proposed scheme in

A comparison of leisure constraints among three outdoor recreation activities: whitewater rafting, canoeing and overnight horseback riding

Science.gov (United States)

Gyan P. Nyaupane; Duarte B. Morais; Alan Graefe

2003-01-01

The purpose of this study was to compare leisure constraints across three outdoor recreation activities, whitewater rafting, canoeing, and overnight horseback riding, in the context of the three-dimensional leisure constraints model proposed by Crawford and Godbey (1987). The sample consisted of 650 outdoor enthusiasts from 14 U.S. states who showed an interest in...

Validation of a Functional Pyelocalyceal Renal Model for the Evaluation of Renal Calculi Passage While Riding a Roller Coaster.

Science.gov (United States)

Mitchell, Marc A; Wartinger, David D

2016-10-01

The identification and evaluation of activities capable of dislodging calyceal renal calculi require a patient surrogate or validated functional pyelocalyceal renal model. To evaluate roller coaster facilitation of calyceal renal calculi passage using a functional pyelocalyceal renal model. A previously described adult ureteroscopy and renoscopy simulator (Ideal Anatomic) was modified and remolded to function as a patient surrogate. Three renal calculi of different sizes from the patient who provided the original computed tomographic urograph on which the simulator was based were used. The renal calculi were suspended in urine in the model and taken for 20 rides on the Big Thunder Mountain Railroad roller coaster at Walt Disney World in Orlando, Florida. The roller coaster rides were analyzed using variables of renal calculi volume, calyceal location, model position on the roller coaster, and renal calculi passage. Sixty renal calculi rides were analyzed. Independent of renal calculi volume and calyceal location, front seating on the roller coaster resulted in a passage rate of 4 of 24. Independent of renal calculi volume and calyceal location, rear seating on the roller coaster resulted in a passage rate of 23 of 36. Independent of renal calculi volume in rear seating, calyceal location differed in passage rates, with an upper calyceal calculi passage rate of 100%; a middle calyceal passage rate of 55.6%; and a lower calyceal passage rate of 40.0%. The functional pyelocalyceal renal model serves as a functional patient surrogate to evaluate activities that facilitate calyceal renal calculi passage. The rear seating position on the roller coaster led to the most renal calculi passages.

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

Science.gov (United States)

Xu, Guangzhong; Zhang, Nong; Roser, Holger M.

2015-12-01

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.

Therapeutic Effects of Horseback Riding Therapy on Gross Motor Function in Children with Cerebral Palsy: A Systematic Review

Science.gov (United States)

Whalen, Cara N.; Case-Smith, Jane

2012-01-01

Purpose: This systematic review examined the efficacy of hippotherapy or therapeutic horseback riding (THR) on motor outcomes in children with cerebral palsy (CP). Methods: Databases were searched for clinical trials of hippotherapy or THR for children with CP. Results: Nine articles were included in this review. Although the current level of…

Carbon monoxide poisoning in children riding in the back of pickup trucks.

Science.gov (United States)

Hampson, N B; Norkool, D M

OBJECTIVE - To describe the case characteristics of a series of children poisoned with carbon monoxide while traveling in the back of pickup trucks. DESIGN - Pediatric cases referred for treatment of carbon monoxide poisoning with hyperbaric oxygen between 1986 and 1991 were reviewed. Those cases that occurred during travel in the back of pickup trucks were selected. Clinical follow-up by telephone interview ranged from 2 to 55 months. SETTING - A private, urban, tertiary care center in Seattle, Wash. PATIENTS - Twenty children ranging from 4 to 16 years of age. INTERVENTION - All patients were treated with hyperbaric oxygen. MAIN OUTCOME MEASURES - Characteristics of the poisoning incident and clinical patient outcome. RESULTS - Of 68 pediatric patients treated for accidental carbon monoxide poisoning, 20 cases occurred as children rode in the back of pickup trucks. In 17 of these, the children were riding under a rigid closed canopy on the rear of the truck, while three episodes occurred as children rode beneath a tarpaulin. Average carboxyhemoglobin level on emergency department presentation was 18.2% +/- 2.4% (mean +/- SEM; range, 1.6% to 37.0%). Loss of consciousness occurred in 15 of the 20 children. One child died of cerebral edema, one had permanent neurologic deficits, and 18 had no recognizable sequelae related to the episode. In all cases, the truck exhaust system had a previously known leak or a tail pipe that exited at the rear rather than at the side of the pickup truck. CONCLUSIONS - Carbon monoxide poisoning is a significant hazard for children who ride in the back of pickup trucks. If possible, this practice should be avoided.

Alterations in muscular enzymes of horses competing long-distance endurance rides under tropical climate Alterações em enzimas musculares de cavalos em competições de enduro de longa distância em clima tropical

Directory of Open Access Journals (Sweden)

A.R. Teixeira-Neto

2008-06-01

Full Text Available This study tried to monitor the alterations of muscle enzymes activity - creatinokinase (CK, lactate dehydrogenase (LDH, and aspartate aminotransferase (AST - in a group of horses that participated of 70 and 100km distance rides in five competitions of an annual endurance championship under tropical climate. Pre ride levels (U/l were 245.13±9.84 for CK, 496.61±14.76 for LDH, and 328.95±8.65 for AST. When compared to these levels, the results revealed a significant decrease in all enzymes activities in the first moment of the rides. Peak levels, significantly different, were reached, immediately after rides by CK (413.591±50.75; 24 hours post rides by LDH (628.61±33.30; and 48 hours after rides by AST (389.89±16.96. Monitoring of recovery period revealed different behavior among enzymes activities with CK values returning to pre ride values (279.61±23.05 24 hours post rides, while LDH and AST values returned to pre ride values (505.25±33.78 and 359.35±24.90, respectively 72 hours post rides. These data revealed different alterations in concentration of muscular enzymes in endurance horses directly related to the duration of the effort.Estudaram-se as alterações de atividade das enzimas musculares creatino quinase (CK, lactato desidrogenase (LDH e aspartato aminotransferase (AST em um grupo de cavalos que utilizados em provas de enduro de 70 e 100km de distância, em cinco competições. Os valores (U/l basais (antes da largada foram 245,13±9,84 para CK, 496,61±14,76 para LDH e 328,95±8,65 para AST. Todas as atividades das enzimas decresceram no primeiro momento das provas (~30km. Valores de pico, significativamente diferentes, foram alcançados para CK (413,59±50,75 imediatamente após 70km de distância; 24 horas após para LDH (628,61±33,30; e 48 horas após as provas para AST (389,89±16,96. A monitoração do período de recuperação revelou diferente comportamento entre as concentrações enzimáticas com CK retornando aos

Analysis of Train Suspension System Using MR dampers

Science.gov (United States)

RamaSastry, DVA; Ramana, K. V.; Mohan Rao, N.; Siva Kumar, SVR; Priyanka, T. G. L.

2016-09-01

This paper deals with introducing MR dampers to the Train Suspension System for improving the ride comfort of the passengers. This type of suspension system comes under Semi-active suspension system which utilizes the properties of MR fluid to damp the vibrations. In case of high speed trains, the coach body is subjected to vibrations due to vertical displacement, yaw and pitch movements. When the body receives these disturbances from the ground,the transmission of vibrations to the passenger increases which affect the ride comfort. In this work, the equations of motion of suspension system are developed for both conventional passive system and semi-active system and are modelled in Matlab/Simulink and analysis has been carried out. The passive suspension system analysis shows that it is taking more time to damp the vibrations and at the same time the transmissibility of vibrations is more.Introducing MR dampers,vertical and angular displacements of the body are computed and compared. The results show that the introduction of MR dampers into the train suspension system improves ride comfort.

Relation between riding quality of MAGLEV vehicle and guideway construction accuracy. Chodendo jiki fujoshiki tetsudo guideway no seko seido to norigokochi level

Energy Technology Data Exchange (ETDEWEB)

Matsuura, A; Hashimoto, S; Furukawa, A [Railway Technology Research Institute, Tokyo (Japan)

1994-01-15

Good riding quality of MAGLEV vehicle requires construction of its guideway to a high level of accuracy. This paper discusses the relation of the power spectrum density (hereinafter the PSD) made up of guideway construction accuracy and its deviation with the level of riding comfort. The discussion uses the 'riding comfort affecting coefficient' consisting of the unit construction length, vehicle's travelling speed, and vibration characteristics. The PSD, which has been used to evaluate track deviation in the iron wheel/rail system railways, is derived from the number of limit exceeded point, the value 'P' as a track deviation coefficient, and the PSD. The relation between the standard deviation in construction errors and the PSD was derived based on track construction methods. This calculation method is characterized by a function with a step form. The relation between the deviation and the level was quantified using this PSD. Its practicability was verified by a simulated re-inspection of the guideway deviation. Correlation between the level and the construction accuracy was elucidated, and a method for determining the criteria for construction accuracy was established. A side wall beam installing vehicle has been fabricated on a trial basis for a side wall system for the guideway, and installation accuracy tests are being carried out. 14 refs., 12 figs., 3 tabs.

Influence of girth strap placement and panel flocking material on the saddle pressure pattern during riding of horses.

Science.gov (United States)

Byström, A; Stalfelt, A; Egenvall, A; Von Peinen, K; Morgan, K; Roepstorff, L

2010-11-01

Saddle fit is well recognised as an important factor for the health and performance of riding horses. However, only few studies have addressed general effects of different saddle construction details within a group of horses. To assess the influence of girth strap placement, traditional vs. v-system, and panel flocking material, wool vs. synthetic foam, on the saddle pressure pattern during riding. Six horses were ridden by 3 riders in sitting and rising trot and sitting canter. Saddle pressure was measured with 3 different saddle variants: 1) wool flocked panels and traditional girthing (baseline); 2) wool flocked panels and v-system girthing; and 3) foam filled panels and traditional girthing. From the pressure data, a number of descriptive variables were extracted. These were analysed using ANCOVA models with horse, rider, saddle, seat (sitting/rising, trot only) and speed as independent variables. With foam filled panels stride maximum pressures under the hind part of the saddle increased by 7-12% and the area under the saddle with a stride mean pressure >11 kPa increased by 114 cm(2) in trot and 127 cm(2) in canter. With v-system girthing, the latter variable also increased, but only by 53 and 38 cm(2) in trot and canter, respectively. In addition, stride maximum pressures under the front part of the saddle tended to increase (≤ 9%). Both flocking material and girthing have a significant influence on the saddle pressure and should thus be considered in saddle fitting. Wool seems a better flocking material than foam of the type used in the current study. For girthing, traditional placement seems equally good if not better than the v-system. However, further studies are needed to show if these results are valid for a larger population of riding horses. © 2010 EVJ Ltd.

(Ne)efektivní fungování skupin: Free-riding na Karlově Univerzitě

OpenAIRE

Kibitzki, Jonas Moritz

2016-01-01

Group work is pervading modern society's life with potentially huge advantages but also the peril of motivational losses. This master thesis focuses on the latter ones, namely on free-riding and social loafing, in the educational context. I conducted a field research at the Institute of Economic Studies at Charles University in Prague. The results are set into context with existing studies from the US, scrutinizing the generalizability of these studies. Students of this sample consider teamwo...

Validation of the Chinese-language brief sensation seeking scale: implications for risky riding behaviors of parental motorcyclists and their child passengers.

Science.gov (United States)

Fan, Hsiu-Ping; Lin, Mau-Roung; Bai, Chyi-Huey; Huang, Ping-Wen; Chiang, Yung-Hsiao; Chiu, Wen-Ta

2014-12-01

Motorcycles are the leading cause of road traffic deaths in the Western Pacific and Southeast Asia, where Mandarin Chinese is the most commonly used language. Sensation seeking (SS) is reported to correlate with many risky motor vehicle behaviors, and therefore a culture-adapted Chinese instrument is needed to assess this personality trait in Chinese-speaking motorcycling populations. The standard front and blinded-backward process was carried out to formulate the Chinese-language Brief Sensation Seeking Scale (C-BSSS). 193 parental motorcyclists who rode with their young children were interviewed concerning their SS levels, demographics, riding behaviors, and the driving/riding experiences. A random sample of 30 subjects was re-interviewed 1-2 weeks later to examine the test-retest reliability. Psychometric analyses revealed satisfactory item characteristics, internal consistency, intraobserver reliability, and interobserver reliability. Additionally, parental motorcyclists who had the following characteristics were more likely to be the high sensation seekers (SSers), including male, younger age, presenting risky motor vehicle behaviors of themselves (e.g., higher riding speeds, operating after drinking, using a mobile phone while operating, and receiving a traffic ticket), and carrying child passengers who demonstrated dangerous motorcycling behaviors (e.g., a younger age, non-helmeted, and overloaded). We conclude that the C-BSSS is a useful and reliable measure of SS for ethnic Chinese populations. This instrument may be helpful to develop the future prevention strategy of motorcycle injuries in Chinese parental motorcyclists and their young child passengers. Copyright © 2014. Published by Elsevier Ltd.

Improving Fault Ride-Through Capability of Variable Speed Wind Turbines in Distribution Networks

DEFF Research Database (Denmark)

Mokryani, Geev; Siano, P.; Piccolo, Antonio

2013-01-01

In this paper, a fuzzy controller for improving the fault ride-through (FRT) capability of variable speed wind turbines (WTs) equipped with a doubly fed induction generator (DFIG) is presented. DFIGs can be used as reactive power sources to control the voltage at the point of common coupling (PCC......). The controller is designed to compensate for the voltage at the PCC by simultaneously regulating the reactive and active power generated by WTs. The performance of the controller is evaluated in different case studies considering a different number of wind farms in different locations. Simulations carried out...

Evaluation of the Ride-Through Capability of an Active-Front-End Adjustable Speed Drive under Real Grid Conditions

DEFF Research Database (Denmark)

Liserre, Marco; Klumpner, Christian; Blaabjerg, Frede

2004-01-01

Better quality of the input currents, unity power factor and regenerative capability are not the only benefits of equipping an Adjustable Speed Drive (ASD) with an active front-end-stage. Controlling the power inflow may enable also the reduction of the dc-link energy storage, which will then lead...... to the replacement of the electrolytic capacitors with film capacitors, which have lower energy density meaning that the volume is similar, but will increase the ASD lifetime. In these circumstances, operation under unbalanced and distorted supply voltage as well as high dynamic operation of the ASD makes...... the control task more challenging. The aim of this paper is to investigate the ride-through capability of an ASD with active front-end under real grid conditions and in view of the minimum dc-link storage. Experiments validate the theoretical analysis....

User's manual of JT-60 experimental data analysis system

International Nuclear Information System (INIS)

Hirayama, Takashi; Morishima, Soichi; Yoshioka, Yuji

2010-02-01

In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is a user's manual of the JT-60 experimental data analysis system. (author)

Sibelius: Pohjola's Daughter; Night Ride and Sunrise; Four Legends from Kalevala (Lemminkäinen Suite). Gothenburg Symphony Orchestra, Neeme Järvi / Brian Hunt

Index Scriptorium Estoniae

Hunt, Brian

1997-01-01

Uuest heliplaadist "Sibelius: Pohjola's Daughter; Night Ride and Sunrise; Four Legends from Kalevala (Lemminkäinen Suite). Gothenburg Symphony Orchestra / Neeme Järvi. Deutsche Grammophon 453 426-2; 70:37 DDD

application of covariance analysis to feed/ ration experimental data

African Journals Online (AJOL)

Prince Acheampong

ABSTRACT. The use Analysis of Covariance (ANOCOVA) to feed/ration experimental data for birds was examined. Correlation and Regression analyses were used to adjust for the covariate – initial weight of the experimental birds. The Fisher's F statistic for the straight forward Analysis of Variance (ANOVA) showed ...

The Impact of Free Riding on Price and Service Competition in the Presence of E-Commerce Retailers

OpenAIRE

Steven Strauss

2002-01-01

An extensive literature has focused on price competition and the Internet; however, little attention has been given to the Internet's impact on service competition. Services include activities such as the provision of product information, repairs, faster checkout, after-sales advice/information, retail advertising, certification of products by limiting the available assortment size, and the ability to examine/test merchandise. A consumer "free rides" when the customer uses services at one ret...

3-D Experimental Fracture Analysis at High Temperature

Energy Technology Data Exchange (ETDEWEB)

John H. Jackson; Albert S. Kobayashi

2001-09-14

T*e, which is an elastic-plastic fracture parameter based on incremental theory of plasticity, was determined numerically and experimentally. The T*e integral of a tunneling crack in 2024-T3 aluminum, three point bend specimen was obtained through a hybrid analysis of moire interferometry and 3-D elastic-plastic finite element analysis. The results were verified by the good agreement between the experimentally and numerically determined T*e on the specimen surface.

Low voltage ride-through capability control for single-stage inverter-based grid-connected photovoltaic power plant

DEFF Research Database (Denmark)

Al-Shetwi, Ali Q.; Sujod, Muhamad Zahim; Blaabjerg, Frede

2018-01-01

to enhance the LVRT capability based on the Malaysian standards and modern grid codes connection requirements. The proposed control overcomes the problems of dc-link over-voltage and ac over-current that may cause disconnection or damage to the inverter. For this purpose, dc-chopper brake controller...... to improve the capability of ride-through fault safely and keep the inverter connected, but also to provide grid support through active and reactive power control at different type of faults....

Low voltage ride-through capability control for single-stage inverter-based grid-connected photovoltaic power plant

DEFF Research Database (Denmark)

Al-Shetwi, Ali Q.; Sujod, Muhamad Zahim; Blaabjerg, Frede

2018-01-01

and current limiter are used to absorb the excessive dc-voltage and limits excessive ac current, respectively. This control strategy can also ensure the reactive power support through the injection of reactive current according to the standard requirements as soon as the voltage sag is detected. Furthermore...... to improve the capability of ride-through fault safely and keep the inverter connected, but also to provide grid support through active and reactive power control at different type of faults....

Efficient fault-ride-through control strategy of DFIG-based wind turbines during the grid faults

International Nuclear Information System (INIS)

Mohammadi, J.; Afsharnia, S.; Vaez-Zadeh, S.

2014-01-01

Highlights: • A comparative review of DFIGs fault-ride-through improvement approaches is presented. • An efficient control strategy is proposed to improve the FRT capability of DFIG. • The rotor overcurrent, DC-link overvoltage and torque oscillations are decreased. • The RSC, DC-link capacitor and mechanical parts are kept safe during the grid faults. • The DFIG remains connected to the grid during the symmetrical and asymmetrical faults. - Abstract: As the penetration of wind power in electrical power system increases, it is necessary that wind turbines remain connected to the grid and contribute to the system stability during and after the grid faults. This paper proposes an efficient control strategy to improve the fault ride through (FRT) capability of doubly fed induction generator (DFIG) during the symmetrical and asymmetrical grid faults. The proposed scheme consists of active and passive FRT compensators. The active compensator is carried out by determining the rotor current references to reduce the rotor over voltages. The passive compensator is based on rotor current limiter (RCL) that considerably reduces the rotor inrush currents at the instants of occurring and clearing the grid faults with deep sags. By applying the proposed strategy, negative effects of the grid faults in the DFIG system including the rotor over currents, electromagnetic torque oscillations and DC-link over voltage are decreased. The system simulation results confirm the effectiveness of the proposed control strategy

Macular hemorrhage after roller coaster riding in a single-eyed patient with congenital glaucoma

Directory of Open Access Journals (Sweden)

Dilek Guven

Full Text Available ABSTRACT A 21-year-old female presented with a 4-day history of decreased vision in her only functional eye (right eye, OD. She had a history of multiple ocular surgeries in both eyes because of congenital glaucoma and had lost light perception in her left eye several years prior. Ophthalmological examination revealed 0.15 Snellen visual acuity, and fundoscopy revealed nearly total cupping and pallor of the optic disc and multiple retinal hemorrhagic foci in the macula in OD. Lesions spontaneously resolved over a few months. Gravitational forces during a roller coaster ride may have caused this macular hemorrhage.

Low-Voltage Ride-Through of Variable Speed Wind Turbines with Permanent Magnet Synchronous Generator

DEFF Research Database (Denmark)

Deng, Fujin; Chen, Zhe

2009-01-01

This paper presents a simulation model of a MW-level variable speed wind turbine with a permanent magnet synchronous generator (PMSG) and a full-scale converter developed in the simulation tool of PSCAD/EMTDC. The low voltage ride-through (LVRT) capability of the wind turbine is investigated. A new...... control scheme for the wind turbine that keeps it connected to the grid during grid faults is designed and simulated. Its design has special focus on the regulation of the DC-link voltage. Simulation results show the proposed control scheme is an effective measure to improve LVRT capability of variable...

About the Little Red Riding Hood, Durex and anger: production, meaning and reception of one fairy tale and one commercial ad

Directory of Open Access Journals (Sweden)

Dragana Antonijević

2016-03-01

Full Text Available By applying the semiological analysis, this paper considers planned and unplanned readings of a provocative domestic commercial, which, in order to convey its message, transposed the Little Red Riding Hood’s character in accordance with the advertised product – Durex condoms. This commercial caused furious reactions of parents who took legal action for breaching the Law on public advertising and, especially, "harming children’s sensibility and integrity". Provocative billboards also caused numerous comments in the daily newspapers, in the Internet chat rooms, with some considering the commercial vulgar and offensive and others having no problem with it, adding that the ones who took offence belonged to those puritan and conservative layers of the society. In order to discover the reasons to this kind of reactions, I started with researching how the commercial was made and what kind of message it offered. Next, I reconsidered the meaning of the very fairy tale "The Red Riding Hood". Its original version, which contains open sexual allusions, is quite different to the changed versions offered by Charles Perrault and the Grimm brothers. Their versions can be seen as fakelore, since they outrageously intervened on the plot and the meaning of the original fairy tale. However, since the Grimm brothers’ version is the most popular, it is a fact that our public reacted with such anger led by the meaning of their version, which accentuates overeating and cannibalism, and not sexual development of girls, which is the basic message of the original version. This is where the "communicational noise" that led to those negative reactions came from. By discovering the true meaning of the tale, the answer is given to the question whether the advertising agency made a slip up, or it had actually found the right way to communicate the hidden message of the tale, and at the same time ruin the advertising campaign for which it was used. In the end, range and

Solving the dial-a-ride problem using agent-based simulation

Directory of Open Access Journals (Sweden)

Campbell, Ian

2016-11-01

Full Text Available The ‘dial-a-ride problem’ (DARP requires a set of customers to be transported by a limited fleet of vehicles between unique origins and destinations under several service constraints, including within defined time windows. The problem is considered NP-hard, and has typically been solved using metaheuristic methods. An agent-based simulation (ABS model was developed, where each vehicle bids to service customers based on a weighted objective function that considers the cost to service the customer and the time quality of the service that would be achieved. The approach applied a pre- processing technique to reduce the search space, given the service time window constraints. Tests of the model showed significantly better customer transit and waiting times than the benchmark datasets. The ABS was able to obtain solutions for much larger problem sizes than the benchmark solutions, with this work being the first known application of ABS to the DARP.

Metaheuristics for the dynamic stochastic dial-a-ride problem with expected return transports.

Science.gov (United States)

Schilde, M; Doerner, K F; Hartl, R F

2011-12-01

The problem of transporting patients or elderly people has been widely studied in literature and is usually modeled as a dial-a-ride problem (DARP). In this paper we analyze the corresponding problem arising in the daily operation of the Austrian Red Cross. This nongovernmental organization is the largest organization performing patient transportation in Austria. The aim is to design vehicle routes to serve partially dynamic transportation requests using a fixed vehicle fleet. Each request requires transportation from a patient's home location to a hospital (outbound request) or back home from the hospital (inbound request). Some of these requests are known in advance. Some requests are dynamic in the sense that they appear during the day without any prior information. Finally, some inbound requests are stochastic. More precisely, with a certain probability each outbound request causes a corresponding inbound request on the same day. Some stochastic information about these return transports is available from historical data. The purpose of this study is to investigate, whether using this information in designing the routes has a significant positive effect on the solution quality. The problem is modeled as a dynamic stochastic dial-a-ride problem with expected return transports. We propose four different modifications of metaheuristic solution approaches for this problem. In detail, we test dynamic versions of variable neighborhood search (VNS) and stochastic VNS (S-VNS) as well as modified versions of the multiple plan approach (MPA) and the multiple scenario approach (MSA). Tests are performed using 12 sets of test instances based on a real road network. Various demand scenarios are generated based on the available real data. Results show that using the stochastic information on return transports leads to average improvements of around 15%. Moreover, improvements of up to 41% can be achieved for some test instances.

Electronic Power Transformer Control Strategy in Wind Energy Conversion Systems for Low Voltage Ride-through Capability Enhancement of Directly Driven Wind Turbines with Permanent Magnet Synchronous Generators (D-PMSGs

Directory of Open Access Journals (Sweden)

Hui Huang

2014-11-01

Full Text Available This paper investigates the use of an Electronic Power Transformer (EPT incorporated with an energy storage system to smooth the wind power fluctuations and enhance the low voltage ride-through (LVRT capability of directly driven wind turbines with permanent magnet synchronous generators (D-PMSGs. The decoupled control schemes of the system, including the grid side converter control scheme, generator side converter control scheme and the control scheme of the energy storage system, are presented in detail. Under normal operating conditions, the energy storage system absorbs the high frequency component of the D-PMSG output power to smooth the wind power fluctuations. Under grid fault conditions, the energy storage system absorbs the redundant power, which could not be transferred to the grid by the EPT, to help the D-PMSG to ride through low voltage conditions. This coordinated control strategy is validated by simulation studies using MATLAB/Simulink. With the proposed control strategy, the output wind power quality is improved and the D-PMSG can ride through severe grid fault conditions.

Owning the Journey: Using Collaborative Revisions of Little Red Riding Hood in Teaching Introduction to Literature at a Historically Black University

Science.gov (United States)

Scott, Pauline

2012-01-01

Design and implementation of a collaborative course project, using Little Red Riding Hood (LRRH) to teach and discuss the concepts of orality, cultural legacy, archetypes, adaptation/appropriation, and social criticism in an Introduction to Literature course at Historically Black Alabama State University in Montgomery, Alabama. The student groups…

Numerical and experimental analysis on tensile properties of ...

Indian Academy of Sciences (India)

A Shadrach Jeyasekaran

2014-11-17

Nov 17, 2014 ... 4 Department of Electronics and Communication Engineering, Sri Sai ... the findings that the numerical analysis is found to be higher than experimental analysis. .... using ANSYS software has showed that the differences of.

A Novel Wind Turbine Concept Based on an Electromagnetic Coupler and the Study of Its Fault Ride-through Capability

Directory of Open Access Journals (Sweden)

Rui You

2013-11-01

Full Text Available This paper presents a novel type of variable speed wind turbine with a new drive train different from the variable speed wind turbine commonly used nowadays. In this concept, a synchronous generator is directly coupled with the grid, therefore, the wind turbine transient overload capability and grid voltage support capability can be significantly improved. An electromagnetic coupling speed regulating device (EMCD is used to connect the gearbox high speed shaft and synchronous generator rotor shaft, transmitting torque to the synchronous generator, while decoupling the gearbox side and the synchronous generator, so the synchronous generator torque oscillations during a grid fault are not transmitted to the gearbox. The EMCD is composed of an electromagnetic coupler and a one quadrant operation converter with reduced capability and low cost. A control strategy for the new wind turbine is proposed and a 2 MW wind turbine model is built to study the wind turbine fault ride-through capability. An integrated simulation environment based on the aeroelastic code HAWC2 and software Matlab/Simulink is used to study its fault ride-through capability and the impact on the structural loads during grid three phase and two phase short circuit faults.

Zero-voltage ride-through capability of single-phase grid-connected photovoltaic systems

DEFF Research Database (Denmark)

Zhang, Zhen; Yang, Yongheng; Ma, Ruiqing

2017-01-01

Distributed renewable energy systems play an increasing role in today’s energy paradigm. Thus, intensive research activities have been centered on improving the performance of renewable energy systems, including photovoltaic (PV) systems, which should be of multiple-functionality. That is, the PV...... systems should be more intelligent in the consideration of grid stability, reliability, and fault protection. Therefore, in this paper, the performance of single-phase grid-connected PV systems under an extreme grid fault (i.e., when the grid voltage dips to zero) is explored. It has been revealed...... that combining a fast and accurate synchronization mechanism with appropriate control strategies for the zero-voltage ride-through (ZVRT) operation is mandatory. Accordingly, the representative synchronization techniques (i.e., the phase-locked loop (PLL) methods) in the ZVRT operation are compared in terms...

A Current Limiting Strategy to Improve Fault Ride-Through of Inverter Interfaced Autonomous Microgrids

DEFF Research Database (Denmark)

Sadeghkhani, Iman; Esmail Hamedani Golshan, Mohamad; Guerrero, Josep M.

2017-01-01

With high penetration of distributed energy resources (DER), fault management strategy is of great importance for the distribution network operation. The objective of this paper is to propose a current and voltage limiting strategy to enhance fault ride-through (FRT) capability of inverter...... for both four- and three-wire configurations. The proposed strategy provides high voltage and current quality during overcurrent conditions, which is necessary for sensitive loads. Several time-domain simulation studies are conducted to investigate the FRT capability of the proposed strategy against both...... asymmetrical and symmetrical faults. Moreover, the proposed method is tested on the CIGRE benchmark microgrid to demonstrate the effectiveness of the proposed limiting strategy....

Fault Ride Through Capability Enhancement of a Large-Scale PMSG Wind System with Bridge Type Fault Current Limiters

Directory of Open Access Journals (Sweden)

ALAM, M. S.

2018-02-01

Full Text Available In this paper, bridge type fault current limiter (BFCL is proposed as a potential solution to the fault problems of permanent magnet synchronous generator (PMSG based large-scale wind energy system. As PMSG wind system is more vulnerable to disturbances, it is essential to guarantee the stability during severe disturbances by enhancing the fault ride through capability. BFCL controller has been designed to insert resistance and inductance during the inception of system disturbances in order to limit fault current. Constant capacitor voltage has been maintained by the grid voltage source converter (GVSC controller while current extraction or injection has been achieved by machine VSC (MVSC controller. Symmetrical and unsymmetrical faults have been applied in the system to show the effectiveness of the proposed BFCL solution. PMSG wind system, BFCL and their controllers have been implemented by real time hardware in loop (RTHIL setup with real time digital simulator (RTDS and dSPACE. Another significant feature of this work is that the performance of the proposed BFCL is compared with that of series dynamic braking resistor (SDBR. Comparative RTHIL implementation results show that the proposed BFCL is very efficient in improving system fault ride through capability by limiting the fault current and outperforms SDBR.

Vision-based measuring system for rider's pose estimation during motorcycle riding

Science.gov (United States)

Cheli, F.; Mazzoleni, P.; Pezzola, M.; Ruspini, E.; Zappa, E.

2013-07-01

Inertial characteristics of the human body are comparable with the vehicle ones in motorbike riding: the study of a rider's dynamic is a crucial step in system modeling. An innovative vision based system able to measure the six degrees of freedom of the driver with respect to the vehicle is proposed here: the core of the proposed approach is an image acquisition and processing technique capable of reconstructing the position and orientation of a target fixed on the rider's back. The technique is firstly validated in laboratory tests comparing measured and imposed target motion laws and successively tested in a real case scenario during track tests with amateur and professional drivers. The presented results show the capability of the technique to correctly describe the driver's dynamic, his interaction with the vehicle as well as the possibility to use the new measuring technique in the comparison of different driving styles.

TFTR Experimental Data Analysis Collaboration

International Nuclear Information System (INIS)

Callen, J.D.

1993-01-01

The research performed under the second year of this three-year grant has concentrated on a few key TFTR experimental data analysis issues: MHD mode identification and effects on supershots; identification of new MHD modes; MHD mode theory-experiment comparisons; local electron heat transport inferred from impurity-induced cool pulses; and some other topics. Progress in these areas and activities undertaken in conjunction with this grant are summarized briefly in this report

The BCD of response time analysis in experimental economics.

Science.gov (United States)

Spiliopoulos, Leonidas; Ortmann, Andreas

2018-01-01

For decisions in the wild, time is of the essence. Available decision time is often cut short through natural or artificial constraints, or is impinged upon by the opportunity cost of time. Experimental economists have only recently begun to conduct experiments with time constraints and to analyze response time (RT) data, in contrast to experimental psychologists. RT analysis has proven valuable for the identification of individual and strategic decision processes including identification of social preferences in the latter case, model comparison/selection, and the investigation of heuristics that combine speed and performance by exploiting environmental regularities. Here we focus on the benefits, challenges, and desiderata of RT analysis in strategic decision making. We argue that unlocking the potential of RT analysis requires the adoption of process-based models instead of outcome-based models, and discuss how RT in the wild can be captured by time-constrained experiments in the lab. We conclude that RT analysis holds considerable potential for experimental economics, deserves greater attention as a methodological tool, and promises important insights on strategic decision making in naturally occurring environments.

Z-Source Inverter Based Power Quality Compensator with Enhanced Ride-Through Capability

DEFF Research Database (Denmark)

Gajanayake, C.J.; Vilathgamuwa, D.M.; Loh, P.C.

2007-01-01

Distributed generation has been gaining acceptance over the years and it has the potential to provide reliable power to sensitive loads. However, distributed networks are prone to unbalanced faults conditions. This makes single inverter DG systems unsuitable as UPS systems. This paper proposes...... a Zsource inverter based power quality compensator and a control structure that supplies high quality voltage to the connected sensitive load in the presence of other non linear loads. The proposed topology consists of combination of shunt and series inverters connected to a common Z-source impedance...... network. The shunt inverter is controlled to maintain a quality voltage waveform at the load bus. Whereas the series inverter enhances the ride-through capability during grid faults, protects the shunt inverter by limiting the current and also controls the power delivered to the grid. The performance...

Modified ride-on toy cars for early power mobility: a technical report.

Science.gov (United States)

Huang, Hsiang-Han; Galloway, James C

2012-01-01

Children with significantly decreased mobility have limited opportunities to explore their physical and social environment. A variety of assistive technologies are available to increase mobility; however, no single device provides the level of functional mobility that children developing typically enjoy. The purpose of this technical report is to formally introduce a new power mobility option--the modified ride-on toy car. This report will provide (a) an overview of toy car features, (b) examples of basic electrical and mechanical modifications, and (c) a brief clinical case. With creative use and customized modifications, toy cars can function as a "general learning environment" for use in the clinic, home, and school. As such, we anticipate that these cars will become a multiuse clinical tool to address not only mobility goals but also goals involving body function and structure such as posture and movement impairments.

Humanism, Modernism and Designing Education: Exploring Progressive Relations between Australia, New Zealand and the West Riding of Yorkshire 1930s-1970s

Science.gov (United States)

Burke, Catherine

2018-01-01

This article takes as a starting point the career of Sir Alec Clegg, Chief Education Officer for the West Riding of Yorkshire (1945-1974), and traces his professional connections with educationists in Australia and New Zealand. In exploring the nature of global exchanges between educators, artists, architects and designers in the decades…

Procedure for statistical analysis of one-parameter discrepant experimental data

International Nuclear Information System (INIS)

Badikov, Sergey A.; Chechev, Valery P.

2012-01-01

A new, Mandel–Paule-type procedure for statistical processing of one-parameter discrepant experimental data is described. The procedure enables one to estimate a contribution of unrecognized experimental errors into the total experimental uncertainty as well as to include it in analysis. A definition of discrepant experimental data for an arbitrary number of measurements is introduced as an accompanying result. In the case of negligible unrecognized experimental errors, the procedure simply reduces to the calculation of the weighted average and its internal uncertainty. The procedure was applied to the statistical analysis of half-life experimental data; Mean half-lives for 20 actinides were calculated and results were compared to the ENSDF and DDEP evaluations. On the whole, the calculated half-lives are consistent with the ENSDF and DDEP evaluations. However, the uncertainties calculated in this work essentially exceed the ENSDF and DDEP evaluations for discrepant experimental data. This effect can be explained by adequately taking into account unrecognized experimental errors. - Highlights: ► A new statistical procedure for processing one-parametric discrepant experimental data has been presented. ► Procedure estimates a contribution of unrecognized errors in the total experimental uncertainty. ► Procedure was applied for processing half-life discrepant experimental data. ► Results of the calculations are compared to the ENSDF and DDEP evaluations.

Fault ride-through capability of DFIG wind turbines

Energy Technology Data Exchange (ETDEWEB)

Hansen, Anca D. [Risoe National Laboratory, Wind Energy Department, P.O. Box 49, DK-4000 Roskilde (Denmark); Michalke, Gabriele [Darmstadt University, Institute for Electrical Power Systems, Landgraf-Georg-Strasse 4, 64283 Darmstadt (Germany)

2007-07-15

This paper concentrates on the fault ride-through capability of doubly fed induction generator (DFIG) wind turbines. The main attention in the paper is, therefore, drawn to the control of the DFIG wind turbine and of its power converter and to the ability to protect itself without disconnection during grid faults. The paper provides also an overview on the interaction between variable-speed DFIG wind turbines and the power system subjected to disturbances, such as short circuit faults. The dynamic model of DFIG wind turbine includes models for both mechanical components as well as for all electrical components, controllers and for the protection device of DFIG necessary during grid faults. The viewpoint of the paper is to carry out different simulations to provide insight and understanding of the grid fault impact on both DFIG wind turbines and on the power system itself. The dynamic behaviour of DFIG wind turbines during grid faults is simulated and assessed by using a transmission power system generic model developed and delivered by the Danish Transmission System Operator Energinet.dk in the power system simulation toolbox PowerFactory DIgSILENT. The data for the wind turbines are not linked to a specific manufacturer, but are representative for the turbine and generator type used in variable-speed DFIG wind turbines with pitch control. (author)

Predictive Sea State Estimation for Automated Ride Control and Handling - PSSEARCH

Science.gov (United States)

Huntsberger, Terrance L.; Howard, Andrew B.; Aghazarian, Hrand; Rankin, Arturo L.

2012-01-01

PSSEARCH provides predictive sea state estimation, coupled with closed-loop feedback control for automated ride control. It enables a manned or unmanned watercraft to determine the 3D map and sea state conditions in its vicinity in real time. Adaptive path-planning/ replanning software and a control surface management system will then use this information to choose the best settings and heading relative to the seas for the watercraft. PSSEARCH looks ahead and anticipates potential impact of waves on the boat and is used in a tight control loop to adjust trim tabs, course, and throttle settings. The software uses sensory inputs including IMU (Inertial Measurement Unit), stereo, radar, etc. to determine the sea state and wave conditions (wave height, frequency, wave direction) in the vicinity of a rapidly moving boat. This information can then be used to plot a safe path through the oncoming waves. The main issues in determining a safe path for sea surface navigation are: (1) deriving a 3D map of the surrounding environment, (2) extracting hazards and sea state surface state from the imaging sensors/map, and (3) planning a path and control surface settings that avoid the hazards, accomplish the mission navigation goals, and mitigate crew injuries from excessive heave, pitch, and roll accelerations while taking into account the dynamics of the sea surface state. The first part is solved using a wide baseline stereo system, where 3D structure is determined from two calibrated pairs of visual imagers. Once the 3D map is derived, anything above the sea surface is classified as a potential hazard and a surface analysis gives a static snapshot of the waves. Dynamics of the wave features are obtained from a frequency analysis of motion vectors derived from the orientation of the waves during a sequence of inputs. Fusion of the dynamic wave patterns with the 3D maps and the IMU outputs is used for efficient safe path planning.

Operation and management manual of JT-60 experimental data analysis system

International Nuclear Information System (INIS)

Hirayama, Takashi; Morishima, Soichi

2014-03-01

In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is an operation and management manual the JT-60 experimental data analysis system. (author)

DMFC anode polarization: Experimental analysis and model validation

Energy Technology Data Exchange (ETDEWEB)

Casalegno, A.; Marchesi, R. [Dipartimento di Energetica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

2008-01-03

Anode two-phase flow has an important influence on DMFC performance and methanol crossover. In order to elucidate two-phase flow influence on anode performance, in this work, anode polarization is investigated combining experimental and modelling approach. A systematic experimental analysis of operating conditions influence on anode polarization is presented. Hysteresis due to operating condition is observed; experimental results suggest that it arises from methanol accumulation and has to be considered in evaluating DMFC performances and measurements reproducibility. A model of DMFC anode polarization is presented and utilised as tool to investigate anode two-phase flow. The proposed analysis permits one to produce a confident interpretation of the main involved phenomena. In particular, it confirms that methanol electro-oxidation kinetics is weakly dependent on methanol concentration and that methanol transport in gas phase produces an important contribution in anode feeding. Moreover, it emphasises the possibility to optimise anode flow rate in order to improve DMFC performance and reduce methanol crossover. (author)

Lechery, lycanthropy and Little Red Riding Hood in Type O Negative’s ‘Wolf Moon (Including Zoanthropic Paranoia)’

OpenAIRE

Digioia, A.

2016-01-01

Type O Negative’s ‘Wolf Moon (including Zoanthropic Paranoia)’ seems to be a melodic ode to lascivious werewolves or to sexual intercourse during menstruation, which is transformative, allowing participation to channel animalistic instincts. Subject to more critical examination, ‘Wolf Moon (including Zoanthropic Paranoia)’ can also be presented as a contemporary incarnation of the ‘Little Red Riding Hood’ myth. Both contain the same themes: the stigmatization of eroticism, reclamation of agen...

An experimental approach to free vibration analysis of smart composite beam

Science.gov (United States)

Yashavantha Kumar, G. A.; Sathish Kumar, K. M.

2018-02-01

Experimental vibration analysis is a main concern of this study. In designing any structural component the important parameter that has to be considered is vibration. The present work involves the experimental investigation of free vibration analysis of a smart beam. Smart beam consists of glass/epoxy composite as a main substrate and two PZT patches. The PZT patches are glued above and below the main beam. By experimentation the natural frequencies and mode shapes are obtained for both with and without PZT patches of a beam. Finally through experimentation the response of the smart beam is recorded.

Identifying Effective Spelling Interventions Using a Brief Experimental Analysis and Extended Analysis

Science.gov (United States)

McCurdy, Merilee; Clure, Lynne F.; Bleck, Amanda A.; Schmitz, Stephanie L.

2016-01-01

Spelling is an important skill that is crucial to effective written communication. In this study, brief experimental analysis procedures were used to examine spelling instruction strategies (e.g., whole word correction; word study strategy; positive practice; and cover, copy, and compare) for four students. In addition, an extended analysis was…

VIRTUAL EXPERIMENTAL ANALYSIS ON CLEANING ELEMENT OF SUGARCANE HARVESTER

Institute of Scientific and Technical Information of China (English)

Ma Fanglan; Li Shangping; He Yulin; Meng Yanmei; Chen Weixu

2005-01-01

The laws of influence of different factors have been analyzed in order to enhance the working efficiency and fatigue life of the cleaning element in brush shape of the sugarcane harvester.Based on the principle of orthogonal experiment design, the virtual-orthogonal-experimental analysis for the cleaning element is carried out on the finite element analysis (FEA) software-ANSYS after analyzing the nonlinear structural behavior in the working procedure. The results are analyzed with the overall balancing method, and then the optimal combination is got, which is made up of different levels of different factors. Also the optimal combination of design parameters of the cleaning element received from the virtual experimental analysis is conducted an experiment to confirm that the virtual analysis model and results are right, and the effect of factors on the function of the cleaning element is obtained by more analysis and further optimizing.

Experimental data base for containment thermalhydraulic analysis

International Nuclear Information System (INIS)

Cheng, X.; Bazin, P.; Cornet, P.; Hittner, D.; Jackson, J.D.; Lopez Jimenez, J.; Naviglio, A.; Oriolo, F.; Petzold, H.

2001-01-01

This paper describes the joint research project DABASCO which is supported by the European Community under a cost-shared contract and participated by nine European institutions. The main objective of the project is to provide a generic experimental data base for the development of physical models and correlations for containment thermalhydraulic analysis. The project consists of seven separate-effects experimental programs which deal with new innovative conceptual features, e.g. passive decay heat removal and spray systems. The results of the various stages of the test programs will be assessed by industrial partners in relation to their applicability to reactor conditions

A Round for Free: How rich countries are getting a free ride on agricultural subsidies at the WTO

OpenAIRE

OXFAM International,

2005-01-01

Agricultural dumping has a devastating effect on poor countries. The Uruguay Round at the WTO was supposed to cut the subsidies that lead to dumping, but it failed to do so — as did reforms of Europe's Common Agricultural Policy and US agricultural policy. Now history is set to repeat itself: the Doha Round of negotiations is again giving rich countries a free ride to continue dumping subsidised produce on poor countries. Oxfam believes that the WTO meeting in Hong Kong must put an end to thi...

Study on the energy-efficiency of 'park and ride' systems (French version); Efficience energetique des P et R

Energy Technology Data Exchange (ETDEWEB)

Guillaume-Gentil, S.; Camandona, Ch.; Stucki, M. [Transitec Ingenieurs Conseils, Lausanne (Switzerland); Baumgartner, P.; Lippuner, Ch. [Ernst Basler und Partner AG, Zuerich (Switzerland)

2004-07-01

This comprehensive final report for the Swiss Federal Office of Energy (SFOE) examines the efficiency of 'park and ride' (P+R) systems from the energy-efficiency point of view. 'Park and ride' means: 'Leave your car on a parking area and travel by public transport services for the second part of your journey'. Five hypotheses are examined: that P+R helps improve the general energy-efficiency of traffic, P+R installations are not an economically advantageous measure for improving the energy-efficiency of traffic, that they are not cost-effective, that they are financed by other public transport services and that their contribution to energy efficiency is dependent on the characteristics of their particular locations. The study looks at the positive and negative effects of P+R on energy efficiency and develops criteria for choosing locations. Three typical P+R installations are looked at - at a main station in a city centre, on the edge of a city and on a main city access road. These locations are analysed with respect to their energy and financial balances and their cost-effectiveness. Also, the use of P+R installations is analysed and the importance of the results of the study for traffic planning is discussed.

Coordination between Fault-Ride-Through Capability and Over-current Protection of DFIG Generators for Wind Farms

DEFF Research Database (Denmark)

Bak-Jensen, Birgitte; Kawady, T.A.; Abdel-Rahman, Mansour Hassan

2010-01-01

is investigated. Simulation test cases using MATLAB-Simulink are implemented on a 365-MW wind farm in AL-Zaafarana, Egypt. The simulation results show the influence of the FRT capability on the protective relaying coordination in wind farms, showing that the FRT may work in situations where is were expected......Fault Ride-Through (FRT) capabilities set up according to the grid codes may affect the performance of related protective elements during fault periods. Therefore, in this paper the coordination between the FRT capability and over-current protection of DFIG Wind Generators in MV networks...... not to work, and then disabling the over-current protection, which should have worked in this situation....

DMFC performance and methanol cross-over: Experimental analysis and model validation

Energy Technology Data Exchange (ETDEWEB)

Casalegno, A.; Marchesi, R. [Dipartimento di Energia, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

2008-10-15

A combined experimental and modelling approach is proposed to analyze methanol cross-over and its effect on DMFC performance. The experimental analysis is performed in order to allow an accurate investigation of methanol cross-over influence on DMFC performance, hence measurements were characterized in terms of uncertainty and reproducibility. The findings suggest that methanol cross-over is mainly determined by diffusion transport and affects cell performance partly via methanol electro-oxidation at the cathode. The modelling analysis is carried out to further investigate methanol cross-over phenomenon. A simple model evaluates the effectiveness of two proposed interpretations regarding methanol cross-over and its effects. The model is validated using the experimental data gathered. Both the experimental analysis and the proposed and validated model allow a substantial step forward in the understanding of the main phenomena associated with methanol cross-over. The findings confirm the possibility to reduce methanol cross-over by optimizing anode feeding. (author)

Power requirements and environmental impact of a pedelec. A case study based on real-life applications

Energy Technology Data Exchange (ETDEWEB)

Abagnale, Carmelina, E-mail: c.abagnale@unina.it; Cardone, Massimo, E-mail: massimo.cardone@unina.it; Iodice, Paolo, E-mail: paolo.iodice@unina.it; Strano, Salvatore, E-mail: salvatore.strano@unina.it; Terzo, Mario, E-mail: m.terzo@unina.it; Vorraro, Giovanni, E-mail: giovanni.vorraro@unina.it

2015-07-15

This paper describes the methodologies to appraise the power requests and environmental analysis of an electrically assisted bicycle under real driving conditions, also containing regulations and technical-science-related aspects. For this purpose, in this study, the on-road test program of an electrically assisted bicycle was executed in the urban area of Naples on different test tracks, so a general assessment about its driving behavior under several driving conditions was performed. The power requirements in different typical riding situations were estimated by a procedure based on the experimental kinematic parameters that characterize the driving dynamics collected during the real-life applications. An environmental analysis was also performed, with a methodology that takes into account the environmental assessment of a moped by measuring the experimental moped exhaust emissions of the regulated pollutants. Starting from the results acquired during the different test samples, besides, an assessment of the electric traction offered by this pedelec on the driving comfort was evaluated for different riding situations. - Highlights: • The power requirements of a pedelec in typical riding conditions were identified. • The estimated electricity consumption for battery recharging was defined. • An environmental valuation of the tested pedelec and of a moped was performed. • Emissions that could be saved utilizing a pedelec instead of a moped were derived.

Power requirements and environmental impact of a pedelec. A case study based on real-life applications

International Nuclear Information System (INIS)

Abagnale, Carmelina; Cardone, Massimo; Iodice, Paolo; Strano, Salvatore; Terzo, Mario; Vorraro, Giovanni

2015-01-01

This paper describes the methodologies to appraise the power requests and environmental analysis of an electrically assisted bicycle under real driving conditions, also containing regulations and technical-science-related aspects. For this purpose, in this study, the on-road test program of an electrically assisted bicycle was executed in the urban area of Naples on different test tracks, so a general assessment about its driving behavior under several driving conditions was performed. The power requirements in different typical riding situations were estimated by a procedure based on the experimental kinematic parameters that characterize the driving dynamics collected during the real-life applications. An environmental analysis was also performed, with a methodology that takes into account the environmental assessment of a moped by measuring the experimental moped exhaust emissions of the regulated pollutants. Starting from the results acquired during the different test samples, besides, an assessment of the electric traction offered by this pedelec on the driving comfort was evaluated for different riding situations. - Highlights: • The power requirements of a pedelec in typical riding conditions were identified. • The estimated electricity consumption for battery recharging was defined. • An environmental valuation of the tested pedelec and of a moped was performed. • Emissions that could be saved utilizing a pedelec instead of a moped were derived

Exergy analysis of an experimental heat transformer for water purification

International Nuclear Information System (INIS)

Rivera, W.; Huicochea, A.; Martinez, H.; Siqueiros, J.; Juarez, D.; Cadenas, E.

2011-01-01

First and second law of thermodynamics have been used to analyze the performance of an experimental heat transformer used for water purification. The pure water is produced in the auxiliary condenser delivering an amount of heat, which is recycled into the heat transformer increasing the heat source temperatures and also the internal, external and exergy coefficients of performance. The theoretical and experimental study was divided into two parts. In the first part, a second law analysis was carried out to the experimental system showing that the absorber and the condenser are the components with the highest irreversibilities. In the second part, with the results obtained from the second law analysis, new test runs were carried out at similar conditions than the former but varying only one selected temperature at the time. Comparing the COP (coefficient of performance) between the old and new test runs, it was shown that higher internal, external and exergy coefficients of performance were obtained in all the new test runs. Also it was shown that the ECOP (exergy coefficient of performance) increases with an increment of the amount of the purified water produced and with the decrease of the flow ratio. -- Research highlights: → By the first time an experimental results of a heat transformer for water purification with heat recycling has been presented. → An exergy analysis has been carried out in order to identify the irreversibilities in the main components of the system. → With the results obtained of the second law analysis new experimental test runs were carried out minimizing the system irreversibilities and furthermore increasing the system efficiency.

Analysis of the minimum swerving distance for the development of a motorcycle autonomous braking system.

Science.gov (United States)

Giovannini, Federico; Savino, Giovanni; Pierini, Marco; Baldanzini, Niccolò

2013-10-01

In the recent years the autonomous emergency brake (AEB) was introduced in the automotive field to mitigate the injury severity in case of unavoidable collisions. A crucial element for the activation of the AEB is to establish when the obstacle is no longer avoidable by lateral evasive maneuvers (swerving). In the present paper a model to compute the minimum swerving distance needed by a powered two-wheeler (PTW) to avoid the collision against a fixed obstacle, named last-second swerving model (Lsw), is proposed. The effectiveness of the model was investigated by an experimental campaign involving 12 volunteers riding a scooter equipped with a prototype autonomous emergency braking, named motorcycle autonomous emergency braking system (MAEB). The tests showed the performance of the model in evasive trajectory computation for different riding styles and fixed obstacles. Copyright © 2013 Elsevier Ltd. All rights reserved.

Experimental Investigation of a Temperature-Controlled Car Seat Powered by an Exhaust Thermoelectric Generator

Science.gov (United States)

Du, H.; Wang, Y. P.; Yuan, X. H.; Deng, Y. D.; Su, C. Q.

2016-03-01

To improve the riding comfort and rational utilization of the electrical energy captured by an automotive thermoelectric generator (ATEG), a temperature-controlled car seat was constructed to adjust the temperature of the car seat surface. Powered by the ATEG and the battery, the seat-embedded air conditioner can improve the riding comfort using a thermoelectric device to adjust the surface temperature of the seat, with an air duct to regulate the cold side and hot side of the thermoelectric device. The performance of the thermoelectric cooler (TEC) and theoretical analysis on the optimum state of the TEC device are put forward. To verify the rationality of the air duct design and to ensure sufficient air supply, the velocity field of the air duct system was obtained by means of the finite element method. To validate the reliability of the numerical simulation, the air velocity around the thermoelectric device was measured by a wind speed transmitter. The performance of the temperature-controlled car seat has been validated and is in good agreement with bench tests and real vehicle tests.

Fatigue behavior of a bolted assembly - a comparison between numerical analysis and experimental analysis

International Nuclear Information System (INIS)

Bosser, M.; Vagner, J.

1987-01-01

The fatigue behavior of a bolted assembly can be analysed, either by fatigue tests, or by computing the stress variations and using a fatigue curve. This paper presents the fatigue analysis of a stud-bolt and stud-flange of a steam generator manway carried out with the two methods. The experimental analysis is performed for various levels of load, according to the recommandations of the ASME code section III appendix II. The numerical analysis of the stresses is based on the results of a finite element analysis performed with the program SYSTUS. The maximum stresses are obtained in the first bolt threads. In using these stresses, the allowable number of cycles for each level of loading analysed, is obtained from fatigue curves, as defined in appendix I section III of the ASME code. The analysis underlines that, for each level of load the purely numerical approach is highly conservative, compared to the experimental approach. (orig.)

Study on the energy-efficiency of 'park and ride' systems (French/German version); Efficience energetique des P et R

Energy Technology Data Exchange (ETDEWEB)

Guillaume-Gentil, S.; Camandona, Ch.; Stucki, M. [Transitec Ingenieurs Conseils, Lausanne (Switzerland); Baumgartner, P.; Lippuner, Ch. [Ernst Basler und Partner AG, Zuerich (Switzerland)

2004-07-01

This comprehensive final report for the Swiss Federal Office of Energy (SFOE) examines the efficiency of 'park and ride' (P+R) systems from the energy-efficiency point of view. 'Park and ride' means: 'Leave your car on a parking area and travel by public transport services for the second part of your journey'. Five hypotheses are examined: that P+R helps improve the general energy-efficiency of traffic, P+R installations are not an economically advantageous measure for improving the energy-efficiency of traffic, that they are not cost-effective, that they are financed by other public transport services and that their contribution to energy efficiency is dependent on the characteristics of their particular locations. The study looks at the positive and negative effects of P+R on energy efficiency and develops criteria for choosing locations. Three typical P+R installations are looked at - at a main station in a city centre, on the edge of a city and on a main city access road. These locations are analysed with respect to their energy and financial balances and their cost-effectiveness. Also, the use of P+R installations is analysed and the importance of the results of the study for traffic planning is discussed.

Fault Ride-Through Capability Enhancement of VSC HVDC connected Offshore Wind Power Plants

DEFF Research Database (Denmark)

Sharma, Ranjan; Wu, Qiuwei; Cha, Seung-Tae

2015-01-01

This paper presents a feed forward direct current (DC) voltage control based fault ride-through (FRT) scheme for voltage source converter (VSC) high voltage DC (HVDC) connected offshore wind power plants (WPPs) in order to achieve active control of the WPP collector network AC voltage magnitude......, and to improve the FRT capability. During steady state operation, an open loop AC voltage control is implemented at the WPP side VSC of the HVDC system such that any possible control interactions between the WPP side VSC and the wind turbine VSC are minimized. Whereas during any grid faults, a dynamic AC voltage...... reference is applied based on both the DC voltage error and the AC active-current from the WPP collector system which ensures fast and robust FRT of the VSC HVDC connected offshore WPPs. Under unbalanced fault conditions in the host power system, the resulting oscillatory DC voltage is directly used...

Analysis of the interaction between experimental and applied behavior analysis.

Science.gov (United States)

Virues-Ortega, Javier; Hurtado-Parrado, Camilo; Cox, Alison D; Pear, Joseph J

2014-01-01

To study the influences between basic and applied research in behavior analysis, we analyzed the coauthorship interactions of authors who published in JABA and JEAB from 1980 to 2010. We paid particular attention to authors who published in both JABA and JEAB (dual authors) as potential agents of cross-field interactions. We present a comprehensive analysis of dual authors' coauthorship interactions using social networks methodology and key word analysis. The number of dual authors more than doubled (26 to 67) and their productivity tripled (7% to 26% of JABA and JEAB articles) between 1980 and 2010. Dual authors stood out in terms of number of collaborators, number of publications, and ability to interact with multiple groups within the field. The steady increase in JEAB and JABA interactions through coauthors and the increasing range of topics covered by dual authors provide a basis for optimism regarding the progressive integration of basic and applied behavior analysis. © Society for the Experimental Analysis of Behavior.

Fault ride-through enhancement of fixed speed wind turbine using bridge-type fault current limiter

Directory of Open Access Journals (Sweden)

Mostafa I. Marei

2016-05-01

Full Text Available The interaction between wind energy turbines and the grid results in two main problems, increasing the short-circuit level and reducing the Fault Ride-Through (FRT capability during faults. The objective of this paper is to solve these problems, for fixed speed Wind Energy Systems (WECS, utilizing the bridge-type Fault Current Limiter (FCL with a discharging resistor. A simple cascaded control system is proposed for the FCL to regulate the terminal voltage of the generator and limit the current. The system is simulated on PSCAD/EMTDC software to evaluate the dynamic performance of the proposed WECS compensated by FCL. The simulation results show the potentials of the FCL as a simple and effective method for solving grid interconnection problems of WECS.

Barriers and solutions for AC low voltage fault ride-through on multi-terminal HVDC grids

Energy Technology Data Exchange (ETDEWEB)

Silva, B.; Moreira, C.L.; Leite, H.; Pecas Lopes, J.A. [Porto Univ. (Portugal). Dept. de Engenharia Electrotecnica e de Computadores (DEEC); Tecnologia e Ciencia, Porto (Portugal). Inst. de Engenharia de Sistemas e Computadores (INESCTEC)

2012-07-01

This work analyzes the multi-terminal DC grids dynamics under AC mainland grid fault events envisioning to assess the feasibility of fault ride-through provision. The major bottleneck related with the operation under AC fault consists on the DC side power imbalance that takes place due to the HVDC converter current limits and consequent incapability of delivering all the generated power to the grid. It was also verified that the power imbalance leads to a DC overvoltage occurrence. The mechanism of including chopper devices at the onshore converters DC terminals has been studied as a mean of power equilibrium promotion. Simulations comparing the both cases were performed and the comparison and the effectiveness of the adopted approach are also presented. (orig.)

Experimental and theoretical analysis of cracking in drying soils

OpenAIRE

Lakshmikantha, M.R.

2009-01-01

The thesis focuses on the experimental and theoretical aspects of the process of cracking in drying soils. The results and conclusions were drawn from an exhaustive experimental campaign characterised by innovative multidisciplinary aspects incorporating Fracture Mechanics and classical Soil mechanics, aided with image analysis techniques. A detailed study of the previous works on the topic showed the absence of large scale fully monitored laboratory tests, while the existing studies were per...

Differential Evolution Based IDWNN Controller for Fault Ride-Through of Grid-Connected Doubly Fed Induction Wind Generators.

Science.gov (United States)

Manonmani, N; Subbiah, V; Sivakumar, L

2015-01-01

The key objective of wind turbine development is to ensure that output power is continuously increased. It is authenticated that wind turbines (WTs) supply the necessary reactive power to the grid at the time of fault and after fault to aid the flowing grid voltage. At this juncture, this paper introduces a novel heuristic based controller module employing differential evolution and neural network architecture to improve the low-voltage ride-through rate of grid-connected wind turbines, which are connected along with doubly fed induction generators (DFIGs). The traditional crowbar-based systems were basically applied to secure the rotor-side converter during the occurrence of grid faults. This traditional controller is found not to satisfy the desired requirement, since DFIG during the connection of crowbar acts like a squirrel cage module and absorbs the reactive power from the grid. This limitation is taken care of in this paper by introducing heuristic controllers that remove the usage of crowbar and ensure that wind turbines supply necessary reactive power to the grid during faults. The controller is designed in this paper to enhance the DFIG converter during the grid fault and this controller takes care of the ride-through fault without employing any other hardware modules. The paper introduces a double wavelet neural network controller which is appropriately tuned employing differential evolution. To validate the proposed controller module, a case study of wind farm with 1.5 MW wind turbines connected to a 25 kV distribution system exporting power to a 120 kV grid through a 30 km 25 kV feeder is carried out by simulation.

Differential Evolution Based IDWNN Controller for Fault Ride-Through of Grid-Connected Doubly Fed Induction Wind Generators

Directory of Open Access Journals (Sweden)

N. Manonmani

2015-01-01

Full Text Available The key objective of wind turbine development is to ensure that output power is continuously increased. It is authenticated that wind turbines (WTs supply the necessary reactive power to the grid at the time of fault and after fault to aid the flowing grid voltage. At this juncture, this paper introduces a novel heuristic based controller module employing differential evolution and neural network architecture to improve the low-voltage ride-through rate of grid-connected wind turbines, which are connected along with doubly fed induction generators (DFIGs. The traditional crowbar-based systems were basically applied to secure the rotor-side converter during the occurrence of grid faults. This traditional controller is found not to satisfy the desired requirement, since DFIG during the connection of crowbar acts like a squirrel cage module and absorbs the reactive power from the grid. This limitation is taken care of in this paper by introducing heuristic controllers that remove the usage of crowbar and ensure that wind turbines supply necessary reactive power to the grid during faults. The controller is designed in this paper to enhance the DFIG converter during the grid fault and this controller takes care of the ride-through fault without employing any other hardware modules. The paper introduces a double wavelet neural network controller which is appropriately tuned employing differential evolution. To validate the proposed controller module, a case study of wind farm with 1.5 MW wind turbines connected to a 25 kV distribution system exporting power to a 120 kV grid through a 30 km 25 kV feeder is carried out by simulation.

Exploring the Mode Change Behavior of Park-and-Ride Users

Directory of Open Access Journals (Sweden)

Shahi Taphsir Islam

2015-01-01

Full Text Available This paper investigates the mode change behavior of park-and-ride (P&R users, which is of considerable significance to analyze the effectiveness of P&R site on the commuters’ travel mode change as well as the increase of public transport mode share. Data from an intercept interview survey conducted at different P&R facilities in Metropolitan Melbourne is used. A questionnaire containing revealed preference (RP and stated preference (SP questions is used to interview the individuals who park at the facility and catch public transport to go to city. This study firstly aims to know the factors affecting current travel behavior using RP data and secondly to investigate the importance of the factors on influencing the commuters’ decision of travel mode choice using the SP data. The empirical models using multinomial logistic regression reveal that travel time taken by transit vehicle and transfer time at P&R stations are the primary factors affecting individuals’ decision on choosing public transport whereas parking fare is the additional factor affecting commuters’ choice of driving. Based on the results of this study, the effectiveness of P&R scheme on commuters’ travel mode change is evaluated which would be helpful to shed lights on the future construction of P&R sites.

Experimental Performance Analysis of Wireless Links for Healthcare ...

African Journals Online (AJOL)

Wireless networking is currently being deployed for various applications. However, the application of wireless networking in healthcare remains a challenge mainly because of security and reliability concerns. This paper presents experimental results of performance analysis of a wireless network for healthcare application ...

Experimental analysis of nonlinear problems in solid mechanics

International Nuclear Information System (INIS)

1982-01-01

The booklet presents abstracts of papers from the Euromech Colloqium No. 152 held from Sept. 20th to 24th, 1982 in Wuppertal, Federal Republic of Germany. All the papers are dealing with Experimental Analysis of Nonlinear Problems in Solid Mechanics. (RW)

SiSn diodes: Theoretical analysis and experimental verification

KAUST Repository

Hussain, Aftab M.

2015-08-24

We report a theoretical analysis and experimental verification of change in band gap of silicon lattice due to the incorporation of tin (Sn). We formed SiSn ultra-thin film on the top surface of a 4 in. silicon wafer using thermal diffusion of Sn. We report a reduction of 0.1 V in the average built-in potential, and a reduction of 0.2 V in the average reverse bias breakdown voltage, as measured across the substrate. These reductions indicate that the band gap of the silicon lattice has been reduced due to the incorporation of Sn, as expected from the theoretical analysis. We report the experimentally calculated band gap of SiSn to be 1.11 ± 0.09 eV. This low-cost, CMOS compatible, and scalable process offers a unique opportunity to tune the band gap of silicon for specific applications.

Experimental Bifurcation Analysis Using Control-Based Continuation

DEFF Research Database (Denmark)

Bureau, Emil; Starke, Jens

The focus of this thesis is developing and implementing techniques for performing experimental bifurcation analysis on nonlinear mechanical systems. The research centers around the newly developed control-based continuation method, which allows to systematically track branches of stable...... the resulting behavior, we propose and test three different methods for assessing stability of equilibrium states during experimental continuation. We show that it is possible to determine the stability without allowing unbounded divergence, and that it is under certain circumstances possible to quantify...... and unstable equilibria under variation of parameters. As a test case we demonstrate that it is possible to track the complete frequency response, including the unstable branches, for a harmonically forced impact oscillator with hardening spring nonlinearity, controlled by electromagnetic actuators. The method...

SiSn diodes: Theoretical analysis and experimental verification

KAUST Repository

Hussain, Aftab M.; Wehbe, Nimer; Hussain, Muhammad Mustafa

2015-01-01

We report a theoretical analysis and experimental verification of change in band gap of silicon lattice due to the incorporation of tin (Sn). We formed SiSn ultra-thin film on the top surface of a 4 in. silicon wafer using thermal diffusion of Sn

SciRide Finder: a citation-based paradigm in biomedical literature search.

Science.gov (United States)

Volanakis, Adam; Krawczyk, Konrad

2018-04-18

There are more than 26 million peer-reviewed biomedical research items according to Medline/PubMed. This breadth of information is indicative of the progress in biomedical sciences on one hand, but an overload for scientists performing literature searches on the other. A major portion of scientific literature search is to find statements, numbers and protocols that can be cited to build an evidence-based narrative for a new manuscript. Because science builds on prior knowledge, such information has likely been written out and cited in an older manuscript. Thus, Cited Statements, pieces of text from scientific literature supported by citing other peer-reviewed publications, carry significant amount of condensed information on prior art. Based on this principle, we propose a literature search service, SciRide Finder (finder.sciride.org), which constrains the search corpus to such Cited Statements only. We demonstrate that Cited Statements can carry different information to this found in titles/abstracts and full text, giving access to alternative literature search results than traditional search engines. We further show how presenting search results as a list of Cited Statements allows researchers to easily find information to build an evidence-based narrative for their own manuscripts.

IMPORTANT INFORMATION - Flagstaff Car-Park and Park-and-Ride (P+R)

CERN Document Server

GS Department

2011-01-01

As part of the new arrangements following the arrival of the tram-line at CERN, an Automatic Number-Plate Recognition (ANPR) system has been installed restricting access to the Flagstaff Car-park and the Park-and-Ride (P+R) zone according to the conditions set out below: Holders of a valid P+R user card may enter the car-park at all hours but may only park in the area specifically designated as the P+R zone. P+R user cards can be purchased from the Fondation des Parkings de Genève (http://www.ge.ch/parkings/abonnements.html)   Members of CERN personnel and of contractors' personnel, whatever their status, may freely access the Flagstaff Car-Park at all hours, as long as their vehicle is duly registered with CERN, but they may not use the P+R zone, which is reserved for holders of P+R user cards. Please check that your vehicle number-plates are properly registered via AdaMS (http://cern.ch/adams). If this is not the case, the following action must be taken: - for private or co...

Ride Motion Simulator (RMS)

Data.gov (United States)

Federal Laboratory Consortium — The RMS is a simulator designed for crew station and man-in-the-loop experimentation. The simulator immerses users in a synthetic battlefield to experience realistic...

Analysis of experimental biosensor/FIA lactose measurements

Directory of Open Access Journals (Sweden)

Ferreira L.S.

2003-01-01

Full Text Available Whey is an abundant effluent in the production of cheese and casein. The biotechnological utilization of this economically important and nutritive source is limited mainly because of the presence of high percentages of lactose. This disaccharide has poor solubility, which can cause crystallization and insufficient sweetness in dairy food; additionally, part of the adult population suffers from associated lactose intolerance diseases. There are several methods to determine lactose such as spectrophotometry, polarimetry, infrared spectroscopy, titrimetry and chromatography. However these methods are tedious and time-consuming due to long sample preparation. These disadvantages stimulated the development of an enzymatic lactose biosensor. It employs two immobilized enzymes, beta-galactosidase and glucose oxidase and the quantitative analysis of lactose is based on determination of oxygen consumption in the enzymatic reaction. The influence of temperature on the biosensor signal was experimentally studied. It was observed that a nonlinear relationship exists between the electric response of the biosensor - provided by CAFCA (Computer Assisted Flow Control & Analysis - ANASYSCON, Hannover - and lactose concentration. In this work, attempts were made to correlate these variables using a simple nonlinear model and multilayered neural networks, with the latter providing the best modeling of the experimental data.

An Experimental Metagenome Data Management and AnalysisSystem

Energy Technology Data Exchange (ETDEWEB)

Markowitz, Victor M.; Korzeniewski, Frank; Palaniappan, Krishna; Szeto, Ernest; Ivanova, Natalia N.; Kyrpides, Nikos C.; Hugenholtz, Philip

2006-03-01

The application of shotgun sequencing to environmental samples has revealed a new universe of microbial community genomes (metagenomes) involving previously uncultured organisms. Metagenome analysis, which is expected to provide a comprehensive picture of the gene functions and metabolic capacity of microbial community, needs to be conducted in the context of a comprehensive data management and analysis system. We present in this paper IMG/M, an experimental metagenome data management and analysis system that is based on the Integrated Microbial Genomes (IMG) system. IMG/M provides tools and viewers for analyzing both metagenomes and isolate genomes individually or in a comparative context.

Morphofunctional analysis of experimental model of esophageal achalasia in rats.

Science.gov (United States)

Sabirov, A G; Raginov, I S; Burmistrov, M V; Chelyshev, Y A; Khasanov, R Sh; Moroshek, A A; Grigoriev, P N; Zefirov, A L; Mukhamedyarov, M A

2010-10-01

We carried out a detailed analysis of rat model of esophageal achalasia previously developed by us. Manifest morphological and functional disorders were observed in experimental achalasia: hyperplasia of the squamous epithelium, reduced number of nerve fibers, excessive growth of fibrous connective tissue in the esophageal wall, high contractile activity of the lower esophageal sphincter, and reduced motility of the longitudinal muscle layer. Changes in rat esophagus observed in experimental achalasia largely correlate with those in esophageal achalasia in humans. Hence, our experimental model can be used for the development of new methods of disease treatment.

Sally Ride EarthKAM - Automated Image Geo-Referencing Using Google Earth Web Plug-In

Science.gov (United States)

Andres, Paul M.; Lazar, Dennis K.; Thames, Robert Q.

2013-01-01

Sally Ride EarthKAM is an educational program funded by NASA that aims to provide the public the ability to picture Earth from the perspective of the International Space Station (ISS). A computer-controlled camera is mounted on the ISS in a nadir-pointing window; however, timing limitations in the system cause inaccurate positional metadata. Manually correcting images within an orbit allows the positional metadata to be improved using mathematical regressions. The manual correction process is time-consuming and thus, unfeasible for a large number of images. The standard Google Earth program allows for the importing of KML (keyhole markup language) files that previously were created. These KML file-based overlays could then be manually manipulated as image overlays, saved, and then uploaded to the project server where they are parsed and the metadata in the database is updated. The new interface eliminates the need to save, download, open, re-save, and upload the KML files. Everything is processed on the Web, and all manipulations go directly into the database. Administrators also have the control to discard any single correction that was made and validate a correction. This program streamlines a process that previously required several critical steps and was probably too complex for the average user to complete successfully. The new process is theoretically simple enough for members of the public to make use of and contribute to the success of the Sally Ride EarthKAM project. Using the Google Earth Web plug-in, EarthKAM images, and associated metadata, this software allows users to interactively manipulate an EarthKAM image overlay, and update and improve the associated metadata. The Web interface uses the Google Earth JavaScript API along with PHP-PostgreSQL to present the user the same interface capabilities without leaving the Web. The simpler graphical user interface will allow the public to participate directly and meaningfully with EarthKAM. The use of

Effect of therapeutic horseback riding on balance and gait of people with multiple sclerosis.

Science.gov (United States)

Muñoz-Lasa, Susana; Ferriero, Giorgio; Valero, Raquel; Gomez-Muñiz, Fernando; Rabini, Alessia; Varela, Enrique

2011-01-01

Exercise therapy is an important part of symptomatic and supportive treatment in patients with multiple sclerosis (PwMS). According to the literature, equine-assisted therapies--such as therapeutic horseback riding (THR) and hippotherapy (HT)--are exercise therapies that can have positive physical effects on coordination, muscle tone, postural alignment, stiffness/flexibility, endurance and strength, correcting abnormal movement patterns and improving gait and balance. While HT is known to have a positive effect on balance in PwMS, data about THR are limited. The aim of the present work was to determine the effect of THR on the balance and gait of ambulatory PwMS. Twenty-seven PwMS were included in the study. Patients were divided into two groups: 12 underwent THR and 15 traditional physiotherapy (for both groups, two series of 10 weekly sessions were performed). Before and after the study period, the following outcome measures were applied: Extended Disability Status Scale (EDSS), Barthel Index, Tinetti Performance-Oriented Mobility Assessment (POMA). In addition, patients of the THR group underwent a gait analysis to assess spatiotemporal gait parameters and ground reaction forces. The THR group showed a significant improvement in POMA scores (p<0.005) and two gait parameters: stride time (p<0.04) and ground reaction forces (p<0.01). No statistically significant change was found in the control group. The results of the study show that THR can improve balance and gait of ambulatory PwMS. Findings are preliminary, but promising and in line with the recent literature.

Coordination between Fault-Ride-Through Capability and Overcurrent Protection of DFIG Generatorsfor Wind Farms

DEFF Research Database (Denmark)

Bak-Jensen, Birgitte; Kawady, Tamer A.; Abdel-Rahman, Mansour H.

2009-01-01

Due to the increasing penetration of wind farms in power systems, stability issues arise strongly for power system operation. Doubly-Fed Induction Generators (DFIG) are charac-terized with some unique features during normal/abnormal op-erating conditions as compared with singly-fed ones. Fault ri...... on protective relaying coordination in wind farms.......-Through (FRT) mainly aims to delay a disconnecting of the DFIG units during grid faults for a possible time to restore the system stability if the fault is cleared within a permissible time. This strategy may, however, affect the performance of related protective elements during fault periods. In this paper......, the Coor-dination between Fault Ride-Through Capability and Overcur-rent Protection of DFIG Wind Generators in MV Networks is in-vestigated. Simulation test cases using MATLAB-Simulink are implemented on a 345-MW wind farm in AL-Zaafarana, Egypt. The simulation results show the influence of FRT capability...

An Experimental Validated Control Strategy of Maglev Vehicle-Bridge Self-Excited Vibration

Directory of Open Access Journals (Sweden)

Lianchun Wang

2017-01-01

Full Text Available This study discusses an experimentally validated control strategy of maglev vehicle-bridge vibration, which degrades the stability of the suspension control, deteriorates the ride comfort, and limits the cost of the magnetic levitation system. First, a comparison between the current-loop and magnetic flux feedback is carried out and a minimum model including flexible bridge and electromagnetic levitation system is proposed. Then, advantages and disadvantages of the traditional feedback architecture with the displacement feedback of electromagnet yE and bridge yB in pairs are explored. The results indicate that removing the feedback of the bridge’s displacement yB from the pairs (yE − yB measured by the eddy-current sensor is beneficial for the passivity of the levitation system and the control of the self-excited vibration. In this situation, the signal acquisition of the electromagnet’s displacement yE is discussed for the engineering application. Finally, to validate the effectiveness of the aforementioned control strategy, numerical validations are carried out and the experimental data are provided and analyzed.

Thermoelectric Generation Of Current - Theoretical And Experimental Analysis

Science.gov (United States)

Ruciński, Adam; Rusowicz, Artur

2017-12-01

This paper provides some information about thermoelectric technology. Some new materials with improved figures of merit are presented. These materials in Peltier modules make it possible to generate electric current thanks to a temperature difference. The paper indicates possible applications of thermoelectric modules as interesting tools for using various waste heat sources. Some zero-dimensional equations describing the conditions of electric power generation are given. Also, operating parameters of Peltier modules, such as voltage and electric current, are analyzed. The paper shows chosen characteristics of power generation parameters. Then, an experimental stand for ongoing research and experimental measurements are described. The authors consider the resistance of a receiver placed in the electric circuit with thermoelectric elements. Finally, both the analysis of experimental results and conclusions drawn from theoretical findings are presented. Voltage generation of about 1.5 to 2.5 V for the temperature difference from 65 to 85 K was observed when a bismuth telluride thermoelectric couple (traditionally used in cooling technology) was used.

Cooperative control of VSC-HVDC connected offshore wind farm with Low-Voltage Ride-Through capability

DEFF Research Database (Denmark)

Liu, Yan; Wang, Xiongfei; Chen, Zhe

2012-01-01

The Low-Voltage Ride-Through (LVRT) has become an important grid requirement for offshore wind farms connecting with Voltage Source Converter based High Voltage Direct Current (VSC-HVDC) links. In this paper, a cooperative control strategy with LVRT ability is proposed for a VSC-HVDC connected...... variable speed Squirrel-Cage Induction Generator (SCIG) wind farm. The approach employs a DC-link voltage versus offshore AC-bus frequency droop control on the offshore converter of VSC-HVDC link. Thus, the back-to-back converters of SCIG wind turbines can adjust the generated active power based on the AC......-bus frequency deviations, so that a fast power reduction on the wind farm side can be achieved. The EMTDC/PSCAD simulations are performed on a 300 MW offshore variable speed SCIG wind farm. Simulation results confirm the effectiveness of the proposed control method....

Optimizing Nuclear Reaction Analysis (NRA) using Bayesian Experimental Design

International Nuclear Information System (INIS)

Toussaint, Udo von; Schwarz-Selinger, Thomas; Gori, Silvio

2008-01-01

Nuclear Reaction Analysis with 3 He holds the promise to measure Deuterium depth profiles up to large depths. However, the extraction of the depth profile from the measured data is an ill-posed inversion problem. Here we demonstrate how Bayesian Experimental Design can be used to optimize the number of measurements as well as the measurement energies to maximize the information gain. Comparison of the inversion properties of the optimized design with standard settings reveals huge possible gains. Application of the posterior sampling method allows to optimize the experimental settings interactively during the measurement process.

Riding Horse Harness (Based on Materials from the Chulkovo Burial Ground

Directory of Open Access Journals (Sweden)

Grishakov Valeriy V.

2013-12-01

Full Text Available The items of riding horse harness (bits with psalia, stirrups, buckles, decorations of bridles are analyzed in the article on the basis of the materials from the Chulkovo (Murom burial ground site of the 8th-10th centuries, located on right bank of the Oka river. It has been established that the use of horse harness items by the Muroma culture population, which had left the Chulkovo burial ground, is in full correspondence with the general traditions of the Finno-Ugric peoples of the Volga river region characteristic of the 8th-10th centuries. The shapes of the bits correspond to both the steppe (bits with S-shaped and straight psalia and the local traditions (bits with two and three moving rings. A tendency to uniformity is observed in the tradition of stirrups production. The main differences of the Muroma burial grounds from the neighboring Mordovian ones consist in the presence of horse burials (not known among the Mordovians, and, on the other hand, in a practically complete lack of horse harness in the funeral set of human burials. It can be assumed that the importance of cavalry with the Muromа was lower than with the Mordovians who were living next to the steppe world.

Modeling and performance analysis of movement-based group location management using RFID sensing in public transportation systems.

Science.gov (United States)

Chung, Yun Won

2012-11-22

Location management, which consists of location registration and paging, is essential to provide mobile communication services to mobile stations (MSs). Since MSs riding on a public transportation system (TS) generates significant location registration signaling loads simultaneously when a TS with riding MSs moves between location areas (LAs), group location management was proposed. Under the group location management, an MS performs group registration when it gets on a TS and performs group deregistration when it gets off a TS. Then, only a TS updates its current location when it changes LA, on behalf of all riding MSs. In this paper, movement-based group location management using radio frequency identification (RFID) is proposed, where the MS's getting on and getting off behaviors are detected using RFID and only location update of a TS is carried out if the number of crossed cells from the last updated cell exceeds a predefined movement threshold, on behalf of all riding MSs. Then, we develop an analytical model for the performance analysis of the movement-based group location management and analyze the effects of various parameters on the performance. The results show that the movement-based group location management has reduced signaling cost compared with movement-based individual location management, and optimal performance can be achieved by choosing appropriate movement threshold values.

A STATCOM with Supercapacitors for Low-Voltage Ride-Through in Fixed-Speed Wind Turbines

Directory of Open Access Journals (Sweden)

Andrés Felipe Obando-Montaño

2014-09-01

Full Text Available Fixed-speed wind generator (FSWG technology has an important presence in countries where wind energy started to be developed more than a decade ago. This type of technology cannot be directly adapted to the grid codes, for example those requirements related to the immunity level under voltage dips. That behavior is typically referred as low-voltage ride through (LVRT, and it usually implies certain reactive and active power injection requirements, both during a voltage dip and during the voltage recovery. In this context, a review is presented of the LVRT exigencies present in some of the countries with the most advanced grid codes (Denmark, Germany, Spain and the United Kingdom. In this paper, the capabilities of STATCOM-based devices for fulfilling the LVRT requirements in FSWGs are analyzed. For this purpose, two technologies are considered: a STATCOM with a supercapacitor, which improves its energy storage features; and a STATCOM with a supercapacitor and a DC-DC converter, to achieve higher discharge levels.

A review on the major sources of the interior sound vibration and riding comfort in vehicles

Science.gov (United States)

AlDhahebi, Adel Mohammed; Junoh, Ahmad Kadri; Ahmed, Amran

2016-10-01

Vehicle interior comfort is a crucial criteria that is considered by the perspective customer when purchasing a new vehicle. Meanwhile, automotive industries face the challenges for producing vehicles with better design criteria that meet the expectations of customers and eventually promote higher competitive advantages in areas of acoustic performance, cost effectiveness, product weight, and global competitive market. This review presents the major sources that influence the generation of noise and vibration in the interior part of the vehicles. It also demonstrates the relative methods that are used to assess the interior acoustics and vibration and further improve the riding comfort. This study is of a particular importance for acoustical researchers and automobile engineers, where it brings about suggestions and fundamentals that can contribute to acoustical comfort in vehicles.

An Introduction to Sensitivity Analysis for Unobserved Confounding in Non-Experimental Prevention Research

Science.gov (United States)

Kuramoto, S. Janet; Stuart, Elizabeth A.

2013-01-01

Despite that randomization is the gold standard for estimating causal relationships, many questions in prevention science are left to be answered through non-experimental studies often because randomization is either infeasible or unethical. While methods such as propensity score matching can adjust for observed confounding, unobserved confounding is the Achilles heel of most non-experimental studies. This paper describes and illustrates seven sensitivity analysis techniques that assess the sensitivity of study results to an unobserved confounder. These methods were categorized into two groups to reflect differences in their conceptualization of sensitivity analysis, as well as their targets of interest. As a motivating example we examine the sensitivity of the association between maternal suicide and offspring’s risk for suicide attempt hospitalization. While inferences differed slightly depending on the type of sensitivity analysis conducted, overall the association between maternal suicide and offspring’s hospitalization for suicide attempt was found to be relatively robust to an unobserved confounder. The ease of implementation and the insight these analyses provide underscores sensitivity analysis techniques as an important tool for non-experimental studies. The implementation of sensitivity analysis can help increase confidence in results from non-experimental studies and better inform prevention researchers and policymakers regarding potential intervention targets. PMID:23408282

Constructing experimental designs for discrete-choice experiments: report of the ISPOR Conjoint Analysis Experimental Design Good Research Practices Task Force.

Science.gov (United States)

Reed Johnson, F; Lancsar, Emily; Marshall, Deborah; Kilambi, Vikram; Mühlbacher, Axel; Regier, Dean A; Bresnahan, Brian W; Kanninen, Barbara; Bridges, John F P

2013-01-01

Stated-preference methods are a class of evaluation techniques for studying the preferences of patients and other stakeholders. While these methods span a variety of techniques, conjoint-analysis methods-and particularly discrete-choice experiments (DCEs)-have become the most frequently applied approach in health care in recent years. Experimental design is an important stage in the development of such methods, but establishing a consensus on standards is hampered by lack of understanding of available techniques and software. This report builds on the previous ISPOR Conjoint Analysis Task Force Report: Conjoint Analysis Applications in Health-A Checklist: A Report of the ISPOR Good Research Practices for Conjoint Analysis Task Force. This report aims to assist researchers specifically in evaluating alternative approaches to experimental design, a difficult and important element of successful DCEs. While this report does not endorse any specific approach, it does provide a guide for choosing an approach that is appropriate for a particular study. In particular, it provides an overview of the role of experimental designs for the successful implementation of the DCE approach in health care studies, and it provides researchers with an introduction to constructing experimental designs on the basis of study objectives and the statistical model researchers have selected for the study. The report outlines the theoretical requirements for designs that identify choice-model preference parameters and summarizes and compares a number of available approaches for constructing experimental designs. The task-force leadership group met via bimonthly teleconferences and in person at ISPOR meetings in the United States and Europe. An international group of experimental-design experts was consulted during this process to discuss existing approaches for experimental design and to review the task force's draft reports. In addition, ISPOR members contributed to developing a consensus

Reflections on the glass ceiling: women in the experimental analysis of behavior.

Science.gov (United States)

Odum, A L

2000-01-01

McSweeney and Swindell (1998) sought to determine whether men and women are treated equitably in the experimental analysis of behavior. They purported to show that women participate less in the Journal of the Experimental Analysis of Behavior than in similar journals and that the participation of women decreases with increases in selectivity. Their data were difficult to interpret, however, because they did not present the variability in the mean data drawn from different individuals over time. My analyses were not in accord with their conclusions. When the percentage of associate editors who are women was considered along with the mean percentages McSweeney and Swindell reported for other measures, participation did not systematically decrease with increases in selectivity in recent years. As quantified in terms of their number of publications in the Journal of the Experimental Analysis of Behavior, women who were editorial board members and associate editors were not more highly selected than their male counterparts. Finally, in the recent period from 1996 to 1998, although women submitted fewer manuscripts to the journal, rejection ratios did not differ for men and women. Efforts to increase the participation of women in the experimental analysis of behavior may best be directed toward recruitment and retention rather than some of the suggestions proposed by McSweeney and Swindell (1998), which could inadvertently create different standards for women's work.

Development of advanced methods for analysis of experimental data in diffusion

Science.gov (United States)

Jaques, Alonso V.

There are numerous experimental configurations and data analysis techniques for the characterization of diffusion phenomena. However, the mathematical methods for estimating diffusivities traditionally do not take into account the effects of experimental errors in the data, and often require smooth, noiseless data sets to perform the necessary analysis steps. The current methods used for data smoothing require strong assumptions which can introduce numerical "artifacts" into the data, affecting confidence in the estimated parameters. The Boltzmann-Matano method is used extensively in the determination of concentration - dependent diffusivities, D(C), in alloys. In the course of analyzing experimental data, numerical integrations and differentiations of the concentration profile are performed. These methods require smoothing of the data prior to analysis. We present here an approach to the Boltzmann-Matano method that is based on a regularization method to estimate a differentiation operation on the data, i.e., estimate the concentration gradient term, which is important in the analysis process for determining the diffusivity. This approach, therefore, has the potential to be less subjective, and in numerical simulations shows an increased accuracy in the estimated diffusion coefficients. We present a regression approach to estimate linear multicomponent diffusion coefficients that eliminates the need pre-treat or pre-condition the concentration profile. This approach fits the data to a functional form of the mathematical expression for the concentration profile, and allows us to determine the diffusivity matrix directly from the fitted parameters. Reformulation of the equation for the analytical solution is done in order to reduce the size of the problem and accelerate the convergence. The objective function for the regression can incorporate point estimations for error in the concentration, improving the statistical confidence in the estimated diffusivity matrix

Remote Experimental Site: A command and analysis center for ''Big Physics'' experimentation

International Nuclear Information System (INIS)

Casper, T.A.; Lennon, W.J.

1991-09-01

The next generation of tokamaks, ITER or BPX, will be characterized by an even greater emphasis on joint operation and experimentation. With anticipation of an increased number and diversity of collaborations, we are preparing for such shared facilities by developing a systematic approach to remote, joint physics operation involving experimental teams at several locations. The local area network of computers used for control and data acquisition on present and future experiments can be extended over a wide area network to provide a mechanism for remote operation of subsystems required for physics experiments. The technology required for high bandwidth (≥45Mbps) connections between multiple sites either exists or will be available over the next few years. With the rapid development of high performance workstations, network interfaces, distributed computing, and video conferencing, we can proceed with the development of a system of control and analysis sites to provide for consistent, efficient, and continuing collaborations. Early establishment of such sites could also enhance existing joint design and development efforts. 2 refs., 3 figs

Fault Ride-through Capability Enhancement of Voltage Source Converter-High Voltage Direct Current Systems with Bridge Type Fault Current Limiters

Directory of Open Access Journals (Sweden)

Md Shafiul Alam

2017-11-01

Full Text Available This paper proposes the use of bridge type fault current limiters (BFCLs as a potential solution to reduce the impact of fault disturbance on voltage source converter-based high voltage DC (VSC-HVDC systems. Since VSC-HVDC systems are vulnerable to faults, it is essential to enhance the fault ride-through (FRT capability with auxiliary control devices like BFCLs. BFCL controllers have been developed to limit the fault current during the inception of system disturbances. Real and reactive power controllers for the VSC-HVDC have been developed based on current control mode. DC link voltage control has been achieved by a feedback mechanism such that net power exchange with DC link capacitor is zero. A grid-connected VSC-HVDC system and a wind farm integrated VSC-HVDC system along with the proposed BFCL and associated controllers have been implemented in a real time digital simulator (RTDS. Symmetrical three phase as well as different types of unsymmetrical faults have been applied in the systems in order to show the effectiveness of the proposed BFCL solution. DC link voltage fluctuation, machine speed and active power oscillation have been greatly suppressed with the proposed BFCL. Another significant feature of this work is that the performance of the proposed BFCL in VSC-HVDC systems is compared to that of series dynamic braking resistor (SDBR. Comparative results show that the proposed BFCL is superior over SDBR in limiting fault current as well as improving system fault ride through (FRT capability.

An experimental-numerical method for comparative analysis of joint prosthesis

International Nuclear Information System (INIS)

Claramunt, R.; Rincon, E.; Zubizarreta, V.; Ros, A.

2001-01-01

The difficulty that exists in the analysis of mechanical stresses in bones is high due to its complex mechanical and morphological characteristics. This complexity makes generalists modelling and conclusions derived from prototype tests very questionable. In this article a relatively simple comparative analysis systematic method that allow us to establish some behaviour differences in different kind of prosthesis is presented. The method, applicable in principle to any joint problem, is based on analysing perturbations produced in natural stress states of a bone after insertion of a joint prosthesis and combines numerical analysis using a 3-D finite element model and experimental studies based on photoelastic coating and electric extensometry. The experimental method is applied to compare two total hip prosthesis cement-free femoral stems of different philosophy. One anatomic of new generation, being of oblique setting over cancellous bone and the other madreporique of trochantero-diaphyseal support over cortical bone. (Author) 4 refs

Study on Application of New Approach of Fault Current Limiters in Fault Ride through Capability Improvement of DFIG Based Wind Turbine

DEFF Research Database (Denmark)

Naderi, Seyed Behzad; Davari, Pooya; Zhou, Dao

2018-01-01

Due to salient advantages, Doubly-Fed Induction Generator (DFIG) has more application in power network compared to Fixed Speed Wind Turbine. Because of employing back-to-back converters, one of the important studies regarding new grid code requirements is Fault Ride-Through (FRT) capability....... The proposed FCL can insert a controllable resistance in fault current pass to not only restrict fault current level and compensate voltage sag in the stator but also consume pre-fault output active power of the DFIG regarding wind speed variation. Simulation results and analytics are presented to prove...

Analysis and presentation of experimental results with examples, problems and programs

CERN Document Server

Christodoulides, Costas

2017-01-01

This book is intended as a guide to the analysis and presentation of experimental results. It develops various techniques for the numerical processing of experimental data, using basic statistical methods and the theory of errors. After presenting basic theoretical concepts, the book describes the methods by which the results can be presented, both numerically and graphically. The book is divided into three parts, of roughly equal length, addressing the theory, the analysis of data, and the presentation of results. Examples are given and problems are solved using the Excel, Origin, Python and R software packages. In addition, programs in all four languages are made available to readers, allowing them to use them in analyzing and presenting the results of their own experiments. Subjects are treated at a level appropriate for undergraduate students in the natural sciences, but this book should also appeal to anyone whose work involves dealing with experimental results.

Statistical analysis of correlated experimental data and neutron cross section evaluation

International Nuclear Information System (INIS)

Badikov, S.A.

1998-01-01

The technique for evaluation of neutron cross sections on the basis of statistical analysis of correlated experimental data is presented. The most important stages of evaluation beginning from compilation of correlation matrix for measurement uncertainties till representation of the analysis results in the ENDF-6 format are described in details. Special attention is paid to restrictions (positive uncertainty) on covariation matrix of approximate parameters uncertainties generated within the method of least square fit which is derived from physical reasons. The requirements for source experimental data assuring satisfaction of the restrictions mentioned above are formulated. Correlation matrices of measurement uncertainties in particular should be also positively determined. Variants of modelling the positively determined correlation matrices of measurement uncertainties in a situation when their consequent calculation on the basis of experimental information is impossible are discussed. The technique described is used for creating the new generation of estimates of dosimetric reactions cross sections for the first version of the Russian dosimetric file (including nontrivial covariation information)

Experimental design and quantitative analysis of microbial community multiomics.

Science.gov (United States)

Mallick, Himel; Ma, Siyuan; Franzosa, Eric A; Vatanen, Tommi; Morgan, Xochitl C; Huttenhower, Curtis

2017-11-30

Studies of the microbiome have become increasingly sophisticated, and multiple sequence-based, molecular methods as well as culture-based methods exist for population-scale microbiome profiles. To link the resulting host and microbial data types to human health, several experimental design considerations, data analysis challenges, and statistical epidemiological approaches must be addressed. Here, we survey current best practices for experimental design in microbiome molecular epidemiology, including technologies for generating, analyzing, and integrating microbiome multiomics data. We highlight studies that have identified molecular bioactives that influence human health, and we suggest steps for scaling translational microbiome research to high-throughput target discovery across large populations.

Numerical and on-site experimental dynamic analysis of the Italian PEC fast reactor building

International Nuclear Information System (INIS)

Castoldi, A.; Muzzi, F.; Orsi, R.; Panzeri, P.; Pezzoli, P.; Ruggeri, G.; Martelli, A.; Masoni, P.; Brancati, V.

1988-01-01

On-site dynamic tests and three-dimensional numerical analysis have been performed by ISMES on behalf of ENEA on the building of the Italian PEC fast reactor test facility. These studies aimed at evaluating the safety margins in the PEC reactor seismic analysis and at providing data for the optimization of the PEC seismic monitoring system. The paper describes the on-site dynamic tests carried out using various excitation methods (two eccentric back-rotating-mass mechanical vibrator, blasting in bore-hole and hydraulic actuators at the building foundations). It highlights the purposes of the four tests campaigns performed at various construction stages and reports the main experimental results. In connection with the experimental tests, a detailed 3D finite element model was set up for fixed base analysis; from the results of the 3D model a simplified equivalent model of the structure was then derived for soil-structure interaction analysis. The mathematical model was validated and calibrated by using the results of the experimental dynamic tests. The main numerical results and the comparisons with the experimental data are presented. (author)

Designing a ticket to ride with the Cognitive Work Analysis Design Toolkit.

Science.gov (United States)

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G; Jenkins, Daniel P

2015-01-01

Cognitive work analysis has been applied in the design of numerous sociotechnical systems. The process used to translate analysis outputs into design concepts, however, is not always clear. Moreover, structured processes for translating the outputs of ergonomics methods into concrete designs are lacking. This paper introduces the Cognitive Work Analysis Design Toolkit (CWA-DT), a design approach which has been developed specifically to provide a structured means of incorporating cognitive work analysis outputs in design using design principles and values derived from sociotechnical systems theory. This paper outlines the CWA-DT and describes its application in a public transport ticketing design case study. Qualitative and quantitative evaluations of the process provide promising early evidence that the toolkit fulfils the evaluation criteria identified for its success, with opportunities for improvement also highlighted. The Cognitive Work Analysis Design Toolkit has been developed to provide ergonomics practitioners with a structured approach for translating the outputs of cognitive work analysis into design solutions. This paper demonstrates an application of the toolkit and provides evaluation findings.

Motion Analysis of Chinese Bajiquan Based on Three-dimensional Images of Biomechanics

Directory of Open Access Journals (Sweden)

Ming Zi

2017-06-01

Full Text Available With the development of sports biomechanics, human motion mechanical characteristics have received more and more attention from plenty of researchers. Therefore, how to analyze the biomechanics of the living body has become the principle problem at the present stage. In this study, the three-dimensional (3D image was adopted for a sport dynamics analysis of the riding style of the Chinese Bajiquan. First of all, the change rules of the temporal characteristic parameters when the research objects in the experiment group and the control group completing the riding style action were analyzed based on the characteristics of the action; in the initial stage of the action, the movement speed was relatively slow, and with the center of gravity of the right feet moving down, stable support was formed. Secondly, parameters such as hip joint angle and knee joint angle, etc., were tested from the perspective of dynamics sensors and a rigid block model was constructed to accurately calculate the joint angle. The hip joint guaranteed the stability of center of gravity during movement; the fluctuation of the ankle joint was relatively small, while the maximum fluctuation range of the trunk angle during movement was small, which could keep the upper limbs up straight as well as reduce fluctuation, and the lowering of the center of gravity was good for the stability of the lower limbs. When the riding style action was completed, the toes of the research objects in the experiment group would buckle subconsciously to control the balance of the body. Therefore, the riding style requires the interaction among different parameters, which conforms with the characteristics of the Chinese Bajiquan.

Experimental burn plot trial in the Kruger National Park: history, experimental design and suggestions for data analysis

Directory of Open Access Journals (Sweden)

R. Biggs

2003-12-01

Full Text Available The experimental burn plot (EBP trial initiated in 1954 is one of few ongoing long-termfire ecology research projects in Africa. The trial aims to assess the impacts of differentfire regimes in the Kruger National Park. Recent studies on the EBPs have raised questions as to the experimental design of the trial, and the appropriate model specificationwhen analysing data. Archival documentation reveals that the original design was modified on several occasions, related to changes in the park's fire policy. These modifications include the addition of extra plots, subdivision of plots and changes in treatmentsover time, and have resulted in a design which is only partially randomised. The representativity of the trial plots has been questioned on account of their relatively small size,the concentration of herbivores on especially the frequently burnt plots, and soil variation between plots. It is suggested that these factors be included as covariates inexplanatory models or that certain plots be excluded from data analysis based on resultsof independent studies of these factors. Suggestions are provided for the specificationof the experimental design when analysing data using Analysis of Variance. It is concluded that there is no practical alternative to treating the trial as a fully randomisedcomplete block design.

Editorial: Special Issue on Experimental Vibration Analysis

Science.gov (United States)

Serra, Roger

2018-04-01

The vibratory analyses are particularly present today in the various fields of industry, from aeronautics to manufacturing, from machining and maintenance to civil engineering, to mention a few areas, which have made this special issue a true need. The International Journal of Mechanics & Industry compiles a Special Issue on Experimental Vibration Analysis. More than thirty manuscripts were received by the international scientific committee on the 6th congress AVE2016 and only eight papers have been selected after completing a careful and rigorous peer-review process for the Special Issue, which are briefly summarized below.

Complex experimental analysis of rifle-shooter interaction

Directory of Open Access Journals (Sweden)

Michał Taraszewski, M.ScEng, PhD. candidate

2017-10-01

Full Text Available In this study, a complex analysis of a man-weapon interaction based on experimental effort is presented. The attention is focused on how a shooter can influence on a rifle, opposite to generally considered in literature rifle's impact on a shooter. It is shown, based on the kbk AKM weapon, that each support point of the rifle has an substantial impact on the system. It is said that identifying human reactions on weapon may let to describe gun movement and thus may be applied to weapon accuracy determination.

Maintaining stability of standalone Micro-Grid by employing electrical and mechanical fault ride through techniques upon fixed speed wind generation systems

International Nuclear Information System (INIS)

Kamel, Rashad M.

2013-01-01

Highlights: • This paper presented two fault ride through techniques for fixed speed wind systems. • The first technique is implemented by inserting a series resistance with the terminals of wind generator. • Second technique is performed by adapting the gear ratio to spill some mechanical power. - Abstract: This study presents two different Fault Ride Through (FRT) techniques to keep and restore stability of Fixed Speed Wind Generation system (FSWGs) installed in standalone Micro-Grid (MG). The first technique is an electrical FRT and is implemented by inserting a series resistance with the terminals of FSWGs during fault to maintain reasonable value of terminal voltage and consequently help stability restoration. The second controller is a mechanical FRT controller and is performed by change the gear ratio of wind generation systems to spill part of extracted mechanical power and consequently improving stability issue. Obtained results proved that each controller able to maintain the stability of FSWGs under the most severe disturbance conditions (400 ms three phase fault at FSWGs terminals). The first controller is faster than the second controller in restoring FSWGs stability. Superior results and performances are obtained when the two FRT techniques are employed simultaneously. Without employing any one of the two FRT techniques, FSWGs is not able to maintain or restore its stability after fault clearing. Consequently, MG will lose one of its micro-sources and cannot keep its stability during the standalone mode, unless load shedding strategy is activated. The two proposed controllers are simple, effective, and economical attractive

Development of a simulation model of semi-active suspension for monorail

Science.gov (United States)

Hasnan, K.; Didane, D. H.; Kamarudin, M. A.; Bakhsh, Qadir; Abdulmalik, R. E.

2016-11-01

The new Kuala Lumpur Monorail Fleet Expansion Project (KLMFEP) uses semiactive technology in its suspension system. It is recognized that the suspension system influences the ride quality. Thus, among the way to further improve the ride quality is by fine- tuning the semi-active suspension system on the new KL Monorail. The semi-active suspension for the monorail specifically in terms of improving ride quality could be exploited further. Hence a simulation model which will act as a platform to test the design of a complete suspension system particularly to investigate the ride comfort performance is required. MSC Adams software was considered as the tool to develop the simulation platform, where all parameters and data are represented by mathematical equations; whereas the new KL Monorail being the reference model. In the simulation, the model went through step disturbance on the guideway for stability and ride comfort analysis. The model has shown positive results where the monorail is in stable condition as an outcome from stability analysis. The model also scores a Rating 1 classification in ISO 2631 Ride Comfort performance which is very comfortable as an overall outcome from ride comfort analysis. The model is also adjustable, flexibile and understandable by the engineers within the field for the purpose of further development.

Prevalence of 'high-riding' superior pericardial recesses on thin-section 16-MDCT scans

Energy Technology Data Exchange (ETDEWEB)

Basile, Antonio [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy)]. E-mail: antodoc@yahoo.com; Bisceglie, Paola [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Giulietti, Giorgio [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Calcara, Giacomo [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Figuera, Michele [Department of Radiology, Ospedale Vittorio Emanuele, Via Plebiscito 628, 95124 Catania (Italy); Mundo, Elena [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Granata, Antonio [Department of Nephrology, Ospedale Vittorio Emanuele, Via Plebiscito 628, 95124 Catania (Italy); Runza, Giuseppe [Department of Radiology, Policlinico Universitario, Via del Vespro 129, 90127 Palermo (Italy); Privitera, Carmelo [Department of Radiology, Ospedale Vittorio Emanuele, Via Plebiscito 628, 95124 Catania (Italy); Privitera, Giambattista [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy); Patti, Maria Teresa [Department of Radiology and Interventional Radiology, Ospedale Ferrarotto, via Citelli, 8 95124 Catania (Italy)

2006-08-15

Objective: The aim of this study was to evaluate the prevalence of 'high-riding' superior pericardial recess (HRSPR) on thin-section (1 mm) 16-multidetector computed tomography (MDCT) scans. Materials and methods: Three hundred and fourteen consecutive chest CT scans obtained with a thin-section 16 MDCT were retrospectively evaluated. The prevalence and characteristic of HRSPR were analyzed. Results: HRSPR was depicted in 21 patients (11 men and 10 women) (6.6%) who ranged in age from 28 to 72 years (mean age, 57 years). The extended recesses were rounded/oval shaped in five patients and triangular, spindle, half moon or irregular shaped in the other 16 patients. Conclusion: Our data suggest as HRSPRs are more frequently and better depicted on thinsection MDCT scans, and this improves the capability to distinguish this superior extension of the superior aortic recess from abnormal findings such as lymphadenopathy, cystic lesions, and aortic dissection.

Flexible fault ride through of DFIG wind turbines with DC-chopper solution

Energy Technology Data Exchange (ETDEWEB)

Wessels, Christian; Laubrock, Malte; Bellgardt, Uwe [Nordex Energy GmbH, Hamburg (Germany). System Dept Grid and Grid Integration; Genius, Andreas [Woodward Kempen GmbH, Kempen (Germany). Wind Power Systems

2012-07-01

Grid code requirements are becoming increasingly challenging due to the growing integration of decentralized power generators like renewable energy devices. One of the most challenging grid code requirements is the fault ride through (FRT) of wind turbines. Internationally varying and quickly revised grid code requirements are making it necessary for wind turbine manufacturers to apply competitive hardware and flexible software structures to respond quickly to renewed requirements or project specific changes. In this paper an industrially applied and field-tested hardware solution for the FRT of a DFIG wind turbine is presented. The method using a DC-chopper is making the utilization of the conventionally used rotor crowbar unnecessary. Thus, the consumption of reactive power during grid faults is avoided. Instead, a controlled current can be fed dynamically in order to support the grid voltage and to avoid mechanical stress on the drivetrain of the turbine. Using the presented technology, the application of a flexible FRT software structure is possible to fulfill the internationally varying FRT requirements, which is described here. Selected measurement results from long term FRT tests from a wind turbine manufacturer of a real 2.5 MW wind turbine during grid faults are presented and verify the results. (orig.)

Fault ride-through and grid support of permanent magnet synchronous generator-based wind farms with HVAC and VSC-HVDC transmission systems

DEFF Research Database (Denmark)

Liu, Hongzhi; Chen, Zhe

2012-01-01

This paper describes fault ride-through and grid support of offshore wind farms based on permanent magnet synchronous generator (PMSG) wind turbines connected to the onshore AC network through two alternative transmission systems: high voltage AC (HVAC) or high voltage DC (HVDC) based on voltage...... source converters (VSC). The proposed configurations of the PMSG-based offshore wind farm and VSC-based HVDC are given as well as their control strategies under both steady state and fault state. The PMSG-based offshore wind farm is integrated into a test power transmission system via either HVAC or VSC...

Diseases and parasites in wolves of the Riding Mountain National Park region, Manitoba, Canada.

Science.gov (United States)

Stronen, Astrid V; Sallows, Tim; Forbes, Graham J; Wagner, Brent; Paquet, Paul C

2011-01-01

We examined wolf (Canis lupus) blood and fecal samples from the Riding Mountain National Park (RMNP) region of Manitoba, Canada. In 601 fecal samples collected during two study periods in RMNP and the Duck Mountain Provincial Park and Forest (DMPPF) we found gastrointestinal helminth eggs from Alaria sp. (15.5%), Capillaria sp. (1.0%), taeniid tapeworms (30.8%), Toxascaris sp. (1.7%), Toxocara sp. (0.2%), Trichuris sp. (2.2%), and Moniezia sp. (0.5%). In addition, we found Demodex sp. (0.2%) and the protozoal cysts/oocysts of Sarcocystis sp. (37.3%), Cryptosporidium sp. (1.2%), coccidia (Isospora sp. or Eimeria sp.) (1.7%), and Giardia sp. (29.5%). No fecal shedding of canine parvovirus (CPV, n=387) was detected. All 18 blood samples collected in RMNP showed CPV exposure and eight of 18 blood samples indicated canine distemper virus (CDV) exposure. One wolf died from CDV. Our results are consistent with previous findings on pathogens affecting wolves and with high Giardia sp. prevalence in wolves inhabiting agricultural regions.

The experimental assessment of dynamic tire handling performance

NARCIS (Netherlands)

Pauwelussen, J.P.

1999-01-01

Testing of steady state tire handling performance is nowadays common practice with slip angle sweeps and breaking being simulated in the laboratory with drum or flat belt, or on the road with a test trailer. In recent years, more emphasis is put on dynamic tire models, motivated by ride comfort

Mechanisms of Change for Children Participating in Therapeutic Horse Riding: A Grounded Theory.

Science.gov (United States)

Martin, R A; Graham, F P; Taylor, W J; Levack, W M M

2017-12-13

To develop a model for understanding mechanisms of change in health outcomes for riders with disabilities participating in therapeutic horse riding (THR). Using grounded theory methods we collected and analyzed data from interviews with 16 child riders and 18 caregivers, teachers and primary therapists, and from participant-observation during THR sessions. The central concept underpinning the model illustrating mechanisms of change was "gaining the tools to go on." Riders' experiences suggested the THR landscape (i.e., "where the tools are gathered") allowed for an expanded range of experiences in which riders could participate. Riders experienced an expansion of self-concept by learning to move, succeed, connect, and adapt (i.e., "the tools gathered") within the THR landscape. Riders then iteratively translated an expanded view of self into other environments, reflecting "how and where the tools are used." Findings suggest that positive changes in health arise from riders' experiences of learning and agency within the THR therapeutic landscape, and from the influence of these experiences on a child's developing self-concept. This article considers the wider impact of THR on children's health, beyond a focus on changes in physical outcomes.

A static VAR compensator model for improved ride-through capability of wind farms

Energy Technology Data Exchange (ETDEWEB)

Akhmatov, V.; Soebrink, K.

2004-12-01

Dynamic reactive compensation is associated with reactive power and voltage control of induction generator based wind turbines. With regard to wind power, application areas of dynamic reactive compensation can be improvement of the power quality and the voltage stability, the control of the reactive power exchange between the wind farm and the power grid in the wind farm connection point as well as improvement of the ride-through capability of the wind farm. This article presents a model of a Static VAR Compensator (SVC) with dynamic generic control that is a kind of dynamic reactive compensation device. The term 'generic' implies that the model is general and must cover a variety of the SVC units and their specific controls from different manufacturers. The SVC model with dynamic generic control is implemented by Eltra in the simulation tool Powerfactory and validated from the SVC model in the tool PSCAD/EMTDC. Implementation in the tool Powerfactory makes it possible to apply the SVC model with dynamic generic control in investigations of power system stability with regard to establishment of large wind farms without restrictions on the model size of the power grid. (Author)

Experimental bifurcation analysis of an impact oscillator – Determining stability

DEFF Research Database (Denmark)

Bureau, Emil; Schilder, Frank; Elmegård, Michael

2014-01-01

We propose and investigate three different methods for assessing stability of dynamical equilibrium states during experimental bifurcation analysis, using a control-based continuation method. The idea is to modify or turn off the control at an equilibrium state and study the resulting behavior...

Experimental modal analysis of components of the LHC experiments

CERN Document Server

Guinchard, M; Catinaccio, A; Kershaw, K; Onnela, A

2007-01-01

Experimental modal analysis of components of the LHC experiments is performed with the purpose of determining their fundamental frequencies, their damping and the mode shapes of light and fragile detector components. This process permits to confirm or replace Finite Element analysis in the case of complex structures (with cables and substructure coupling). It helps solving structural mechanical problems to improve the operational stability and determine the acceleration specifications for transport operations. This paper describes the hardware and software equipment used to perform a modal analysis on particular structures such as a particle detector and the method of curve fitting to extract the results of the measurements. This paper exposes also the main results obtained for the LHC Experiments.

Dynamic Carpooling in Urban Areas: Design and Experimentation with a Multi-Objective Route Matching Algorith

Directory of Open Access Journals (Sweden)

Matteo Mallus

2017-02-01

Full Text Available This paper focuses on dynamic carpooling services in urban areas to address the needs of mobility in real-time by proposing a two-fold contribution: a solution with novel features with respect to the current state-of-the-art, which is named CLACSOON and is available on the market; the analysis of the carpooling services performance in the urban area of the city of Cagliari through emulations. Two new features characterize the proposed solution: partial ridesharing, according to which the riders can walk to reach the driver along his/her route when driving to the destination; the possibility to share the ride when the driver has already started the ride by modelling the mobility to reach the driver destination. To analyse which features of the population bring better performance to changing the characteristics of the users, we also conducted emulations. When compared with current solutions, CLACSOON allows for achieving a decrease in the waiting time of around 55% and an increase in the driver and passenger success rates of around 4% and 10%,respectively. Additionally, the proposed features allowed for having an increase in the reduction of the CO2 emission by more than 10% with respect to the traditional carpooling service.

Analysis of cerebral vessels dynamics using experimental data with missed segments

Science.gov (United States)

Pavlova, O. N.; Abdurashitov, A. S.; Ulanova, M. V.; Shihalov, G. M.; Semyachkina-Glushkovskaya, O. V.; Pavlov, A. N.

2018-04-01

Physiological signals often contain various bad segments that occur due to artifacts, failures of the recording equipment or varying experimental conditions. The related experimental data need to be preprocessed to avoid such parts of recordings. In the case of few bad segments, they can simply be removed from the signal and its analysis is further performed. However, when there are many extracted segments, the internal structure of the analyzed physiological process may be destroyed, and it is unclear whether such signal can be used in diagnostic-related studies. In this paper we address this problem for the case of cerebral vessels dynamics. We perform analysis of simulated data in order to reveal general features of quantifying scaling features of complex signals with distinct correlation properties and show that the effects of data loss are significantly different for experimental data with long-range correlations and anti-correlations. We conclude that the cerebral vessels dynamics is significantly less sensitive to missed data fragments as compared with signals with anti-correlated statistics.

Magnetic resonance imaging findings of the lumbar spine in elite horseback riders: correlations with back pain, body mass index, trunk/leg-length coefficient, and riding discipline.

Science.gov (United States)

Kraft, Clayton N; Pennekamp, Peter H; Becker, Ute; Young, Mei; Diedrich, Oliver; Lüring, Christian; von Falkenhausen, Makus

2009-11-01

Most orthopaedic problems experienced by competitive horseback riders are related to pain in the lower back, hip joint, and hamstring muscles. Riders-especially, show jumpers-are frequently hampered in their performance because of lumbar pain. To date, there has been no research into lumbar disk degeneration in elite competitive riders. Competitive horseback riding accelerates lumbar disk degeneration. Cross-sectional study; Level of evidence, 3. Fifty-eight elite riders (18 men, 40 women; mean age, 32.4 years) and a control group of 30 nonriding volunteers (17 men, 13 women; mean age, 28.7 years) were evaluated for lumbar disk degeneration, cross-sectional area of paraspinal muscles, spondylolysis, and spondylolisthesis, using magnetic resonance imaging (MRI). The prevalence of disk degeneration between the 2 groups was compared, and the relationship was investigated between low back pain (LBP), riding discipline, body mass index (BMI), trunk/leg-length coefficient, and MRI results. Eighty-eight percent of elite riders (n = 51) had a history of LBP, versus 33% of the controls (P back pain. Although riders have a high prevalence of LBP, there is no conclusive MRI evidence to suggest that the cause lies in undue disk degeneration, spondylolysis, spondylolisthesis, or pathologic changes of the paraspinal muscles of the lumbar spine.

New experimental and analysis methods in I-DLTS

International Nuclear Information System (INIS)

Pandey, S.U.; Middelkamp, P.; Li, Z.; Eremin, V.

1998-02-01

A new experimental apparatus to perform I-DLTS measurements is presented. The method is shown to be faster and more sensitive than traditional double boxcar I-DLTS systems. A novel analysis technique utilizing multiple exponential fits to the I-DLTS signal from a highly neutron irradiated silicon sample is presented with a discussion of the results. It is shown that the new method has better resolution and can deconvolute overlapping peaks more accurately than previous methods

Systematic review and meta-analysis of the effect of equine assisted activities and therapies on gross motor outcome in children with cerebral palsy.

Science.gov (United States)

Tseng, Sung-Hui; Chen, Hung-Chou; Tam, Ka-Wai

2013-01-01

To evaluate the literature on the efficacy of equine assisted activities and therapies (EAAT) on gross motor outcomes representing the ICF component of body functions and activity in children with cerebral palsy (CP). We conducted a systematic review and meta-analysis of randomized controlled trials and observational studies of hippotherapy (HPOT) and therapeutic horseback riding (TR) for children with spastic CP. Gross motor outcomes, assessed via muscle activity and muscle tone, gait, posture and Gross Motor Function Measures (GMFM) were evaluated. Five TR studies and nine HPOT studies were included. Our meta-analysis indicated that short-term HPOT (total riding time 8-10 min) significantly reduced asymmetrical activity of the hip adductor muscles. HPOT could improve postural control in children with spastic CP, GMFCS level < 5. However, the evidence did not show a statistically significant effect on GMFM after long-term HPOT or TR (total riding time, 8-22 h) in children with spastic CP. This systematic review found insufficient evidence to support the claim that long-term TR or HPOT provide a significant benefit to children with spastic CP. We found no statistically significant evidence of either therapeutic effect or maintenance effects on the gross motor activity status in CP children.

Experimental investigation of thermal neutron analysis based landmine detection technology

International Nuclear Information System (INIS)

Zeng Jun; Chu Chengsheng; Ding Ge; Xiang Qingpei; Hao Fanhua; Luo Xiaobing

2013-01-01

Background: Recently, the prompt gamma-rays neutron activation analysis method is wildly used in coal analysis and explosive detection, however there were less application about landmine detection using neutron method especially in the domestic research. Purpose: In order to verify the feasibility of Thermal Neutron Analysis (TNA) method used in landmine detection, and explore the characteristic of this technology. Methods: An experimental system of TNA landmine detection was built based on LaBr 3 (Ce) fast scintillator detector and 252 Cf isotope neutron source. The system is comprised of the thermal neutron transition system, the shield system, and the detector system. Results: On the basis of the TNA, the wide energy area calibration method especially to the high energy area was investigated, and the least detection time for a typical mine was defined. In this study, the 72-type anti-tank mine, the 500 g TNT sample and several interferential objects are tested in loess, red soil, magnetic soil and sand respectively. Conclusions: The experimental results indicate that TNA is a reliable demining method, and it can be used to confirm the existence of Anti-Tank Mines (ATM) and large Anti-Personnel Mines (APM) in complicated condition. (authors)

Experimental and Numerical Analysis of Notched Composites Under Tension Loading

Science.gov (United States)

Aidi, Bilel; Case, Scott W.

2015-12-01

Experimental quasi-static tests were performed on center notched carbon fiber reinforced polymer (CFRP) composites having different stacking sequences made of G40-600/5245C prepreg. The three-dimensional Digital Image Correlation (DIC) technique was used during quasi-static tests conducted on quasi-isotropic notched samples to obtain the distribution of strains as a function of applied stress. A finite element model was built within Abaqus to predict the notched strength and the strain profiles for comparison with measured results. A user-material subroutine using the multi-continuum theory (MCT) as a failure initiation criterion and an energy-based damage evolution law as implemented by Autodesk Simulation Composite Analysis (ASCA) was used to conduct a quantitative comparison of strain components predicted by the analysis and obtained in the experiments. Good agreement between experimental data and numerical analyses results are observed. Modal analysis was carried out to investigate the effect of static damage on the dominant frequencies of the notched structure using the resulted degraded material elements. The first in-plane mode was found to be a good candidate for tracking the level of damage.

Increase in fault ride through capability of direct drive permanent magnet based wind farm using VSC-HVDC

International Nuclear Information System (INIS)

Maleki, Hesamaldin; Ramachandaramurthy, V K; Lak, Moein

2013-01-01

Burning of fossil fuels and green house gasses causes global warming. This has led to governments to explore the use of green energies instead of fossil fuels. The availability of wind has made wind technology a viable alternative for generating electrical power. Hence, many parts of the world, especially Europe are experiencing a growth in wind farms. However, by increasing the number of wind farms connected to the grid, power quality and voltage stability of grid becomes a matter of concern. In this paper, VSC-HVDC control strategy which enables the wind farm to ride-through faults and regulate voltage for fault types is proposed. The results show that the wind turbine output voltage fulfills the E.ON grid code requirements, when subjected to three phase to ground fault. Hence, continues operation of the wind farm is achieved.

Increase in fault ride through capability of direct drive permanent magnet based wind farm using VSC-HVDC

Science.gov (United States)

Maleki, Hesamaldin; Ramachandaramurthy, V. K.; Lak, Moein

2013-06-01

Burning of fossil fuels and green house gasses causes global warming. This has led to governments to explore the use of green energies instead of fossil fuels. The availability of wind has made wind technology a viable alternative for generating electrical power. Hence, many parts of the world, especially Europe are experiencing a growth in wind farms. However, by increasing the number of wind farms connected to the grid, power quality and voltage stability of grid becomes a matter of concern. In this paper, VSC-HVDC control strategy which enables the wind farm to ride-through faults and regulate voltage for fault types is proposed. The results show that the wind turbine output voltage fulfills the E.ON grid code requirements, when subjected to three phase to ground fault. Hence, continues operation of the wind farm is achieved.

Analytical and experimental vibration analysis of BWR pressure vessel internals

International Nuclear Information System (INIS)

Krutzik, N.; Schad, O.

1975-01-01

This report attempts to evaluate the validity as well as quality of several analytical methods in the light of presently available experimental data for the internals of pressure vessels of boiling-water-reactor-types. The experimental checks were performed after the numerical analysis was completed and showed the accuracy of the numerical results. The analytical investigations were done by finite element programmes - 2-dimensional as well as 3-dimensional, where the effect of the mass distribution with parts of virtual masses on the dynamic response could be studied in depth. The experimental data were collected at various different plants and with different mass correlations. Besides evaluating the dynamic characteristics of the components, tests were also performed to evaluate the vibrations of the pressure vessel relative to the main structure. After analysing extensive recorded data much better understanding of the response under a variety of loading- and boundary conditions could be gained. The comparison of the results of analytical studies with the experimental results made a broad qualitative evaluation possible. (Auth.)

Experimental assessment of computer codes used for safety analysis of integral reactors

Energy Technology Data Exchange (ETDEWEB)

Falkov, A.A.; Kuul, V.S.; Samoilov, O.B. [OKB Mechanical Engineering, Nizhny Novgorod (Russian Federation)

1995-09-01

Peculiarities of integral reactor thermohydraulics in accidents are associated with presence of noncondensable gas in built-in pressurizer, absence of pumped ECCS, use of guard vessel for LOCAs localisation and passive RHRS through in-reactor HX`s. These features defined the main trends in experimental investigations and verification efforts for computer codes applied. The paper reviews briefly the performed experimental investigation of thermohydraulics of AST-500, VPBER600-type integral reactors. The characteristic of UROVEN/MB-3 code for LOCAs analysis in integral reactors and results of its verification are given. The assessment of RELAP5/mod3 applicability for accident analysis in integral reactor is presented.

Thermoelectric Generation Of Current – Theoretical And Experimental Analysis

Directory of Open Access Journals (Sweden)

Ruciński Adam

2017-12-01

Full Text Available This paper provides some information about thermoelectric technology. Some new materials with improved figures of merit are presented. These materials in Peltier modules make it possible to generate electric current thanks to a temperature difference. The paper indicates possible applications of thermoelectric modules as interesting tools for using various waste heat sources. Some zero-dimensional equations describing the conditions of electric power generation are given. Also, operating parameters of Peltier modules, such as voltage and electric current, are analyzed. The paper shows chosen characteristics of power generation parameters. Then, an experimental stand for ongoing research and experimental measurements are described. The authors consider the resistance of a receiver placed in the electric circuit with thermoelectric elements. Finally, both the analysis of experimental results and conclusions drawn from theoretical findings are presented. Voltage generation of about 1.5 to 2.5 V for the temperature difference from 65 to 85 K was observed when a bismuth telluride thermoelectric couple (traditionally used in cooling technology was used.

Experimental and finite element analysis of bond-slip in reinforced concrete

Directory of Open Access Journals (Sweden)

A. R. V. WOLENSKI

Full Text Available Abstract The modeling of reinforced concrete structures has taken advantage of the increasing progress on Computational Mechanics, in such way that complex phenomena, such as cracking and crushing, creep, reinforcement yielding, steel-concrete bond loss, can be modeled in a reasonable realistic way, using the proper set of numerical and computational resources. Among several options, the ones based on the Finite Element Method (FEM allow complex analysis simulations of reinforced concrete structures, including the interaction of different nonlinear effects. This paper deals with the nonlinear finite element analysis of the bond-slip between reinforcing steel and concrete, taking into account an experimental study previously performed. The FEM analysis presented uses a combination of resources where the material behavior of concrete is described by the Microplane Constitutive Model, and an embedded reinforcement model is used to represent steel inside the concrete and take into account the effect of bond-slip. The FEM models were created using the INSANE (INteractive Structural ANalysis Environment computational system, open source software that has a set of FEM tools for nonlinear analysis of reinforced concrete structures. The correlations between numerical-experimentals results and several parameters validate the proposed combination of resources and identifies the significance of various effects on the response.

HTC Experimental Program: Validation and Calculational Analysis

Energy Technology Data Exchange (ETDEWEB)

Fernex, F.; Ivanova, T.; Bernard, F.; Letang, E. [Inst Radioprotect and Surete Nucl, F-92262 Fontenay Aux Roses (France); Fouillaud, P. [CEA Valduc, Serv Rech Neutron and Critcite, 21 - Is-sur-Tille (France); Thro, J. F. [AREVA NC, F-78000 Versailles (France)

2009-05-15

In the 1980's a series of the Haut Taux de Combustion (HTC) critical experiments with fuel pins in a water-moderated lattice was conducted at the Apparatus B experimental facility in Valduc (Commissariat a I'Energie Atomique, France) with the support of the Institut de Radioprotection et de Surete Nucleaire and AREVA NC. Four series of experiments were designed to assess profit associated with actinide-only burnup credit in the criticality safety evaluation for fuel handling, pool storage, and spent-fuel cask conditions. The HTC rods, specifically fabricated for the experiments, simulated typical pressurized water reactor uranium oxide spent fuel that had an initial enrichment of 4. 5 wt% {sup 235}U and was burned to 37.5 GWd/tonne U. The configurations have been modeled with the CRISTAL criticality package and SCALE 5.1 code system. Sensitivity/uncertainty analysis has been employed to evaluate the HTC experiments and to study their applicability for validation of burnup credit calculations. This paper presents the experimental program, the principal results of the experiment evaluation, and modeling. The HTC data applicability to burnup credit validation is demonstrated with an example of spent-fuel storage models. (authors)

Issues in motorcycle sensory and cognitive conspicuity: the impact of motorcycle low-beam headlights and riding experience on drivers' decisions to turn across the path of a motorcycle.

Science.gov (United States)

Mitsopoulos-Rubens, Eve; Lenné, Michael G

2012-11-01

Crashes involving a passenger car and a motorcycle, where the car is turning across the path of the motorcycle, are a major crash type of motorcycle riders. It has been proposed that the incidence of such crashes could be reduced through improvements in motorcycle conspicuity. Operation of low-beam headlights on motorcycles has been discussed as one approach for improving the "sensory conspicuity" of motorcycles during daylight hours, whilst previous experience as a rider may serve to heighten "cognitive conspicuity" through raised awareness of motorcyclists on our roads. Twenty-three experienced car drivers with no riding experience ("drivers") and 20 experienced car drivers who were also motorcycle riders ("driver-riders") completed a series of trials in a driving simulator where their task in each trial was to turn ahead of an oncoming vehicle if they felt that they had sufficient room to do so safely. A key manipulation across trials was whether the oncoming vehicle was a motorcycle with headlights on, or a motorcycle with headlights off. Time gap (short, medium, long) was also manipulated. Results indicate that, at time gaps defined in the current study as short, low-beam headlights may confer some benefit in gap acceptance by encouraging drivers to accept fewer gaps ahead of a motorcycle with headlights on than ahead of a motorcycle with headlights off. No statistically significant differences in gap acceptance between the headlight conditions were found at either the medium or long time gaps. Irrespective of time gap, driver-riders were found to adopt a more efficient turn strategy than drivers with no direct riding experience. Overall, the present research provides support for the use of low-beam headlights and riding experience as tools through which to augment the sensory and cognitive conspicuity of motorcycles, respectively. It is proposed that further research aim to explore directly the precise mechanisms underlying the observed effects. Copyright �

Experimental software for modeling and interpreting educational data analysis processes

Directory of Open Access Journals (Sweden)

Natalya V. Zorina

2017-12-01

Full Text Available Problems, tasks and processes of educational data mining are considered in this article. The objective is to create a fundamentally new information system of the University using the results educational data analysis. One of the functions of such a system is knowledge extraction from accumulated in the operation process data. The creation of the national system of this type is an iterative and time-consuming process requiring the preliminary studies and incremental prototyping modules. The novelty of such systems is that there is a lack of those using this methodology of the development, for this purpose a number of experiments was carried out in order to collect data, choose appropriate methods for the study and to interpret them. As a result of the experiment, the authors were available sources available for analysis in the information environment of the home university. The data were taken from the semester performance, obtained from the information system of the training department of the Institute of IT MTU MIREA, the data obtained as a result of the independent work of students and data, using specially designed Google-forms. To automate the collection of information and analysis of educational data, an experimental software package was created. As a methodology for developing the experimental software complex, a decision was made using the methodologies of rational-empirical complexes (REX and single-experimentation program technologies (TPEI. The details of the program implementation of the complex are described in detail, conclusions are given about the availability of the data sources used, and conclusions are drawn about the prospects for further development.

Analysis of experimental data on relativistic nuclear collisions in the Lobachevsky space

International Nuclear Information System (INIS)

Baldin, A.A.; Baldina, Eh.G.; Kladnitskaya, E.N.; Rogachevskij, O.V.

2004-01-01

Relativistic nuclear collisions are considered in terms of relative 4-velocity and rapidity space (the Lobachevsky space). The connection between geometric relations in the Lobachevsky space and measurable (experimentally determined) kinematic characteristics (transverse momentum, longitudinal rapidity, square relative 4-velocity b ik , etc.) is discussed. The experimental data obtained using the propane bubble chamber are analyzed on the basis of triangulation in the Lobachevsky space. General properties of relativistic invariants distributions characterizing the geometric position of particles in the Lobachevsky space are discussed. The transition energy region is considered on the basis of relativistic approach to experimental data on multiparticle processes. Possible applications of the obtained results for planning of experimental research and analysis of data on multiple particle production are discussed

Experimental analysis of an autothermal reformer for automotive purposes

International Nuclear Information System (INIS)

Caners, C.; Peppley, B.; Harrison, S.; Oosthuizen, P.

2004-01-01

This paper describes the experimental analysis, concomitant with modeling research, to determine improved operating parameters and design of an autothermal reformer. The reformer, utilizing both partial oxidation and steam reforming reactions, along with the water gas shift phenomena is well suited for the mobile application of transportation. This is due to the novel geometry of the autothermal reformer, which seeks to improve the heat transfer characteristics of the process, whereby the exothermic partial oxidation reaction provides the heat energy required to drive the steam reforming reaction, to the point of a thermally neutral system. The paper will present data from the experimental results of reforming iso-octane as a surrogate for gasoline in the form of reformate composition, iso-octane conversion percentages and efficiencies in terms of hydrogen realized per mol of fuel input. (author)

Coordinated Control Strategies of VSC-HVDC-Based Wind Power Systems for Low Voltage Ride Through

Directory of Open Access Journals (Sweden)

Xinyin Zhang

2015-07-01

Full Text Available The Voltage Source Converter-HVDC (VSC-HVDC system applied to wind power generation can solve large scale wind farm grid-connection and long distance transmission problems. However, the low voltage ride through (LVRT of the VSC-HVDC connected wind farm is a key technology issue that must be solved, and it is currently lacking an economic and effective solution. In this paper, a LVRT coordinated control strategy is proposed for the VSC-HVDC-based wind power system. In this strategy, the operation and control of VSC-HVDC and wind farm during the grid fault period is improved. The VSC-HVDC system not only provides reactive power support to the grid, but also effectively maintains the power balance and DC voltage stability by reducing wind-farm power output, without increasing the equipment investment. Correspondingly, to eliminate the influence on permanent magnet synchronous generator (PMSG-based wind turbine (WT systems, a hierarchical control strategy is designed. The speed and validity of the proposed LVRT coordinated control strategy and hierarchical control strategy were verified by MATLAB/Simulink simulations.

Treating experimental data of inverse kinetic method by unitary linear regression analysis

International Nuclear Information System (INIS)

Zhao Yusen; Chen Xiaoliang

2009-01-01

The theory of treating experimental data of inverse kinetic method by unitary linear regression analysis was described. Not only the reactivity, but also the effective neutron source intensity could be calculated by this method. Computer code was compiled base on the inverse kinetic method and unitary linear regression analysis. The data of zero power facility BFS-1 in Russia were processed and the results were compared. The results show that the reactivity and the effective neutron source intensity can be obtained correctly by treating experimental data of inverse kinetic method using unitary linear regression analysis and the precision of reactivity measurement is improved. The central element efficiency can be calculated by using the reactivity. The result also shows that the effect to reactivity measurement caused by external neutron source should be considered when the reactor power is low and the intensity of external neutron source is strong. (authors)

Fault-Ride through Strategy for Permanent-Magnet Synchronous Generators in Variable-Speed Wind Turbines

Directory of Open Access Journals (Sweden)

Mohamed Abdelrahem

2016-12-01

Full Text Available Currently, the electric power production by wind energy conversion systems (WECSs has increased significantly. Consequently, wind turbine (WT generators are requested to fulfill the grid code (GC requirements stated by network operators. In case of grid faults/voltage dips, a mismatch between the generated active power from the wind generator and the active power delivered to the grid is produced. The conventional approach is using a braking chopper (BC in the DC-link to dissipate this active power. This paper proposes a fault-ride through (FRT strategy for variable-speed WECSs based on permanent magnet synchronous generators (PMSGs. The proposed strategy exploits the rotor inertia of the WECS (inertia of the WT and PMSG to store the surplus active power during the grid faults/voltage dips. Thus, no additional hardware components are requested. Furthermore, a direct model predictive control (DMPC scheme for the PMSG is proposed in order to enhance the dynamic behavior of the WECS. The behavior of the proposed FRT strategy is verified and compared with the conventional BC approach for all the operation conditions by simulation results. Finally, the simulation results confirm the feasibility of the proposed FRT strategy.

A study of the free vibration of suspension rod based on four-stage arm mechanism by using computer simulation

Directory of Open Access Journals (Sweden)

Melnychuk S.V.

2016-08-01

Full Text Available We analyze the current state of the prospects and problems of using computer technology to determine the operating parameters of movement of the vehicle. Scientific works related to the study of the properties of the vehicle smooth ride are studied. The following example shows that the modern researches of smooth ride do not pay enough attention to issues associated with the processes that occur in the suspension rod of a vehicle. Scientific works related to the choice of the optimal and simple CAD system for conducting computer simulation tests are overviewed. We developed an animating model of experimental car in SOLIDWORKS environment with the staff suspension rod and the suspension rod based on four-stage arm mechanism, which allows a wide range of tests of components of the vehicle. Methodology and hardware-software complex for testing a car are developed. A test of a vehicle of category N1 is conducted. A computer simulation of the motion of the smooth ride of the car with suspension rod based on four-stage arm mechanism is conducted. The comparative analysis of suspension rod performance based on four-stage arm mechanism is conducted.

Identifying controlling variables for math computation fluency through experimental analysis: the interaction of stimulus control and reinforcing consequences.

Science.gov (United States)

Hofstadter-Duke, Kristi L; Daly, Edward J

2015-03-01

This study investigated a method for conducting experimental analyses of academic responding. In the experimental analyses, academic responding (math computation), rather than problem behavior, was reinforced across conditions. Two separate experimental analyses (one with fluent math computation problems and one with non-fluent math computation problems) were conducted with three elementary school children using identical contingencies while math computation rate was measured. Results indicate that the experimental analysis with non-fluent problems produced undifferentiated responding across participants; however, differentiated responding was achieved for all participants in the experimental analysis with fluent problems. A subsequent comparison of the single-most effective condition from the experimental analyses replicated the findings with novel computation problems. Results are discussed in terms of the critical role of stimulus control in identifying controlling consequences for academic deficits, and recommendations for future research refining and extending experimental analysis to academic responding are made. © The Author(s) 2014.

Acceleration in One, Two, and Three Dimensions in Launched Roller Coasters

Science.gov (United States)

Pendrill, Ann-Marie

2008-01-01

During a roller coaster ride, the body experiences acceleration in three dimensions. An accelerometer can measure and provide a graph of the forces on the body during different parts of a ride. To couple the experience of the body to pictures of the ride and an analysis of data can contribute to a deeper understanding of Newton's laws. This…

Analysis of polymer/oxide interfaces under ambient conditions - An experimental perspective

Science.gov (United States)

González-Orive, A.; Giner, I.; de los Arcos, T.; Keller, A.; Grundmeier, G.

2018-06-01

In many different hybrid materials and materials composites polymers adhere to bulk oxides or oxide covered metal. The formed polymer/oxide interfaces are of crucial importance for the functionality and durability of such complex materials. Especially, under humid and corrosive conditions such interfaces tend to degrade due to permeability of polymers for water, the high adsorption energy of water on oxide surfaces and even corrosion processes of the metal. Different experimental studies considered such interfaces ranging from spectroscopy to electrochemical analysis. However, it is still a challenge to understand the complex interaction especially under non-ideal ambient conditions. The perspective article presents an overview on the existing experimental approaches and considers most recent experimental developments with regard to their potential applications in the area of polymer/oxide interfaces in the future.

Used frying oil biodiesel production: experimental factorial design and multivariate analysis

Directory of Open Access Journals (Sweden)

Rosana de Cassia de Souza Schneider

2009-01-01

Full Text Available Biodiesel é derivado de fontes renováveis ereduz significativamente as emissões atmosféricas. Pode serobtido de diversos processos, como a alcoolise. Nestetrabalho, o biodiesel foi produzido através da alcoolise doóleo de fritura usado de indústrias de alimentação. Umplanejamento experimental foi utilizado e os produtos dereação foram analisados por cromatografia gasosa (CGespectroscopia na região do infravermelho com acessório dereflexão total atenuada horizontal (IV-HATR e análiseexploratória por análise de componentes principais (PCA eanálise hierárquica de grupos (HCA. De acordo com ascondições analisadas obteve-se alta conversão em ésteresmetílicos. Por IV-HATR, a conversão máxima foi observadaem condições experimentais de temperatura ( 50 e 60°C,concentração de catalisador (0,6 e 1,2% e a 1:8 de relaçãomolar entre óleo e metanol. Também foi possíveldiscriminar por análise quimiométrica, 4 grupos noplanejamento experimental e determinar as melhorescondições para a produção de biodiesel de óleo de friturausado.Abstract Biodiesel is derived from renewable sources and it significantly reduces atmospheric emissions. It can be obtained byseveral processes, such as alcoholysis. In this work, biodiesel was produced through alcoholysis of used frying oil from a cateringbusiness. An experimental factorial design was used and the reaction products were analyzed through gas chromatography (GC,horizontal attenuated total reflection Fourier transform infrared (HATR/FT-IR spectroscopy and exploratory analysis withprincipal component analysis (PCA and hierarchical cluster analysis (HCA. Under the conditions analyzed, a high degree ofconversion to methyl ester was found. As shown by HATR/FT-IR, the maximum conversion was obtained when the experimentalconditions had the temperature ( 50 e 60°C, largest catalyst concentration (0,6 e 1,2% and a 1:8 molar proportion of oil tomethanol. It was possible to discriminate

The emergence of modern statistics in agricultural science: analysis of variance, experimental design and the reshaping of research at Rothamsted Experimental Station, 1919-1933.

Science.gov (United States)

Parolini, Giuditta

2015-01-01

During the twentieth century statistical methods have transformed research in the experimental and social sciences. Qualitative evidence has largely been replaced by quantitative results and the tools of statistical inference have helped foster a new ideal of objectivity in scientific knowledge. The paper will investigate this transformation by considering the genesis of analysis of variance and experimental design, statistical methods nowadays taught in every elementary course of statistics for the experimental and social sciences. These methods were developed by the mathematician and geneticist R. A. Fisher during the 1920s, while he was working at Rothamsted Experimental Station, where agricultural research was in turn reshaped by Fisher's methods. Analysis of variance and experimental design required new practices and instruments in field and laboratory research, and imposed a redistribution of expertise among statisticians, experimental scientists and the farm staff. On the other hand the use of statistical methods in agricultural science called for a systematization of information management and made computing an activity integral to the experimental research done at Rothamsted, permanently integrating the statisticians' tools and expertise into the station research programme. Fisher's statistical methods did not remain confined within agricultural research and by the end of the 1950s they had come to stay in psychology, sociology, education, chemistry, medicine, engineering, economics, quality control, just to mention a few of the disciplines which adopted them.

Examination of a dual-process model predicting riding with drinking drivers.

Science.gov (United States)

Hultgren, Brittney A; Scaglione, Nichole M; Cleveland, Michael J; Turrisi, Rob

2015-06-01

Nearly 1 in 5 of the fatalities in alcohol-related crashes are passengers. Few studies have utilized theory to examine modifiable psychosocial predictors of individuals' tendencies to be a passenger in a vehicle operated by a driver who has consumed alcohol. This study used a prospective design to test a dual-process model featuring reasoned and reactive psychological influences and psychosocial constructs as predictors of riding with drinking drivers (RWDD) in a sample of individuals aged 18 to 21. College students (N = 508) completed web-based questionnaires assessing RWDD, psychosocial constructs (attitudes, expectancies, and norms), and reasoned and reactive influences (intentions and willingness) at baseline (the middle of the spring semester) and again 1 and 6 months later. Regression was used to analyze reasoned and reactive influences as proximal predictors of RWDD at the 6-month follow-up. Subsequent analyses examined the relationship between the psychosocial constructs as distal predictors of RWDD and the mediation effects of reasoned and reactive influences. Both reasoned and reactive influences predicted RWDD, while only the reactive influence had a significant unique effect. Reactive influences significantly mediated the effects of peer norms, attitudes, and drinking influences on RWDD. Nearly all effects were constant across gender except parental norms (significant for females). Findings highlight that the important precursors of RWDD were reactive influences, attitudes, and peer and parent norms. These findings suggest several intervention methods, specifically normative feedback interventions, parent-based interventions, and brief motivational interviewing, may be particularly beneficial in reducing RWDD. Copyright © 2015 by the Research Society on Alcoholism.

Numerical simulation and experimental analysis for a Risers Uphold Sub-Surface Buoy (BSR); Simulacao numerica e ensaio experimental da Boia de Sub-superficie de Suporte de Risers - BSSR

Energy Technology Data Exchange (ETDEWEB)

Araujo, Jairo B. de; Almeida, Jose Carlos L. de [PETROBRAS, Rio de Janeiro, RJ (Brazil); Rangel, Marcos; Fernandes, Antonio C.; Santos, Melquisedec F. dos; Sales Junior, Joel Sena [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

2004-07-01

This paper presents results, numeric and experimental, due to installation operation of a Risers Uphold Sub-Surface Buoy, (BSR). This kind of installation developed by PETROBRAS is unique in the world. The work of BSR installation was based on a numeric pre analysis to verify the system and determine the main parameters to be experimentally verified. The second phase of the work was the experimental analysis in a deep water ocean basin. s. The work describes the BSR and their main accessories, the experimental environment and the model constructed in aluminum in a 1:12 scale and the main results. (author)

Experimental and simulation analysis of the W-band SC-FDMA hybrid optical-wireless transmission

DEFF Research Database (Denmark)

Dogadaev, Anton Konstantinovich; Pang, Xiaodan; Deng, Lei

2014-01-01

We report on the experimental demonstration of the W-band hybrid optical-wireless SC-FDMA with 1.49 Gbit/s transmission over up to 2.3 m of air propagation. Provided simulation performance analysis proves a potential to reach 12.1 Gbit/s.......We report on the experimental demonstration of the W-band hybrid optical-wireless SC-FDMA with 1.49 Gbit/s transmission over up to 2.3 m of air propagation. Provided simulation performance analysis proves a potential to reach 12.1 Gbit/s....

Ride comfort optimization of a multi-axle heavy motorized wheel dump truck based on virtual and real prototype experiment integrated Kriging model

Directory of Open Access Journals (Sweden)

Bian Gong

2015-06-01

Full Text Available The optimization of hydro-pneumatic suspension parameters of a multi-axle heavy motorized wheel dump truck is carried out based on virtual and real prototype experiment integrated Kriging model in this article. The root mean square of vertical vibration acceleration, in the center of sprung mass, is assigned as the optimization objective. The constraints are the natural frequency, the working stroke, and the dynamic load of wheels. The suspension structure for the truck is the adjustable hydro-pneumatic suspension with ideal vehicle nonlinear characteristics, integrated with elastic and damping elements. Also, the hydraulic systems of two adjacent hydro-pneumatic suspension are interconnected. Considering the high complexity of the engineering model, a novel kind of meta-model called virtual and real prototype experiment integrated Kriging is proposed in this article. The interpolation principle and the construction of virtual and real prototype experiment integrated Kriging model were elucidated. Being different from traditional Kriging, virtual and real prototype experiment integrated Kriging combines the respective advantages of actual test and Computer Aided Engineering simulation. Based on the virtual and real prototype experiment integrated Kriging model, the optimization results, obtained by experimental verification, showed significant improvement in the ride comfort by 12.48% for front suspension and 11.79% for rear suspension. Compared with traditional Kriging, the optimization effect was improved by 3.05% and 3.38% respectively. Virtual and real prototype experiment integrated Kriging provides an effective way to approach the optimal solution for the optimization of high-complexity engineering problems.

Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

International Nuclear Information System (INIS)

Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves

2017-01-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2 k experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2 3 and the 2 4 , depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

Energy Technology Data Exchange (ETDEWEB)

Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves, E-mail: uandapaula@gmail.com, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2{sup k} experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2{sup 3} and the 2{sup 4}, depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

An experimental-numerical method for comparative analysis of joint prosthesis; Un metodo numerico-experimental para el analisis comparativo de protesis articulares

Energy Technology Data Exchange (ETDEWEB)

Claramunt, R.; Rincon, E.; Zubizarreta, V.; Ros, A.

2001-07-01

The difficulty that exists in the analysis of mechanical stresses in bones is high due to its complex mechanical and morphological characteristics. This complexity makes generalists modelling and conclusions derived from prototype tests very questionable. In this article a relatively simple comparative analysis systematic method that allow us to establish some behaviour differences in different kind of prosthesis is presented. The method, applicable in principle to any joint problem, is based on analysing perturbations produced in natural stress states of a bone after insertion of a joint prosthesis and combines numerical analysis using a 3-D finite element model and experimental studies based on photoelastic coating and electric extensometry. The experimental method is applied to compare two total hip prosthesis cement-free femoral stems of different philosophy. One anatomic of new generation, being of oblique setting over cancellous bone and the other madreporique of trochantero-diaphyseal support over cortical bone. (Author) 4 refs.

Analysis of biogas transformation in experimental biogas plant

Directory of Open Access Journals (Sweden)

Eva Jelínková

2011-01-01

Full Text Available The topic of this paper is the analysis of anaerobic fermentation in an experimental biogas plant. Technological processes and operation parameters were monitored; these processes and parameters include, for example, the optimal structure of the input material and the consideration of the prolonging of the duration of the fermentation process. The goal of prolonging the fermentation process is to obtain higher biogas (and methane production and to decrease the fermentation residue effluvial emissions. Emphasis is also laid on the mutual co-fermentation of substrates with regard to further use of the results in solving technological problems in other biogas plants. This technological process was first monitored in 2009; that is, before the planned intensification and modernization of the experimental biogas plant. Thus, the evaluation of the process could become part of the planned intensification and modernization of the chosen biogas plant (extended by the addition of the second stage of methanogenesis. The results obtained from the experimental biogas plant, which is one of the pioneering biogas plants in the Czech Republic, may serve, to other biogas operators, as a base for the preparation of suitable input, and for improving the efficiency of anaerobic fermentation within their biogas plants. The goal of the improvement of the fermentation process is to fulfill the ecological aspects; that is, to cut down CO2 emissions and to reduce the negative impact of the fermentation process on the environment (reduction of effluvium and noise originating in biogas plants.

Analysis of the experimental positron lifetime spectra by neural networks

International Nuclear Information System (INIS)

Avdic, S.; Chakarova, R.; Pazsit, I.

2003-01-01

This paper deals with the analysis of experimental positron lifetime spectra in polymer materials by using various algorithms of neural networks. A method based on the use of artificial neural networks for unfolding the mean lifetime and intensity of the spectral components of simulated positron lifetime spectra was previously suggested and tested on simulated data [Pazsit et al., Applied Surface Science, 149 (1998), 97]. In this work, the applicability of the method to the analysis of experimental positron spectra has been verified in the case of spectra from polymer materials with three components. It has been demonstrated that the backpropagation neural network can determine the spectral parameters with a high accuracy and perform the decomposition of lifetimes which differ by 10% or more. The backpropagation network has not been suitable for the identification of both the parameters and the number of spectral components. Therefore, a separate artificial neural network module has been designed to solve the classification problem. Module types based on self-organizing map and learning vector quantization algorithms have been tested. The learning vector quantization algorithm was found to have better performance and reliability. A complete artificial neural network analysis tool of positron lifetime spectra has been constructed to include a spectra classification module and parameter evaluation modules for spectra with a different number of components. In this way, both flexibility and high resolution can be achieved. (author)

Multi-objective experimental design for (13)C-based metabolic flux analysis.

Science.gov (United States)

Bouvin, Jeroen; Cajot, Simon; D'Huys, Pieter-Jan; Ampofo-Asiama, Jerry; Anné, Jozef; Van Impe, Jan; Geeraerd, Annemie; Bernaerts, Kristel

2015-10-01

(13)C-based metabolic flux analysis is an excellent technique to resolve fluxes in the central carbon metabolism but costs can be significant when using specialized tracers. This work presents a framework for cost-effective design of (13)C-tracer experiments, illustrated on two different networks. Linear and non-linear optimal input mixtures are computed for networks for Streptomyces lividans and a carcinoma cell line. If only glucose tracers are considered as labeled substrate for a carcinoma cell line or S. lividans, the best parameter estimation accuracy is obtained by mixtures containing high amounts of 1,2-(13)C2 glucose combined with uniformly labeled glucose. Experimental designs are evaluated based on a linear (D-criterion) and non-linear approach (S-criterion). Both approaches generate almost the same input mixture, however, the linear approach is favored due to its low computational effort. The high amount of 1,2-(13)C2 glucose in the optimal designs coincides with a high experimental cost, which is further enhanced when labeling is introduced in glutamine and aspartate tracers. Multi-objective optimization gives the possibility to assess experimental quality and cost at the same time and can reveal excellent compromise experiments. For example, the combination of 100% 1,2-(13)C2 glucose with 100% position one labeled glutamine and the combination of 100% 1,2-(13)C2 glucose with 100% uniformly labeled glutamine perform equally well for the carcinoma cell line, but the first mixture offers a decrease in cost of $ 120 per ml-scale cell culture experiment. We demonstrated the validity of a multi-objective linear approach to perform optimal experimental designs for the non-linear problem of (13)C-metabolic flux analysis. Tools and a workflow are provided to perform multi-objective design. The effortless calculation of the D-criterion can be exploited to perform high-throughput screening of possible (13)C-tracers, while the illustrated benefit of multi

Predict-first experimental analysis using automated and integrated magnetohydrodynamic modeling

Science.gov (United States)

Lyons, B. C.; Paz-Soldan, C.; Meneghini, O.; Lao, L. L.; Weisberg, D. B.; Belli, E. A.; Evans, T. E.; Ferraro, N. M.; Snyder, P. B.

2018-05-01

An integrated-modeling workflow has been developed for the purpose of performing predict-first analysis of transient-stability experiments. Starting from an existing equilibrium reconstruction from a past experiment, the workflow couples together the EFIT Grad-Shafranov solver [L. Lao et al., Fusion Sci. Technol. 48, 968 (2005)], the EPED model for the pedestal structure [P. B. Snyder et al., Phys. Plasmas 16, 056118 (2009)], and the NEO drift-kinetic-equation solver [E. A. Belli and J. Candy, Plasma Phys. Controlled Fusion 54, 015015 (2012)] (for bootstrap current calculations) in order to generate equilibria with self-consistent pedestal structures as the plasma shape and various scalar parameters (e.g., normalized β, pedestal density, and edge safety factor [q95]) are changed. These equilibria are then analyzed using automated M3D-C1 extended-magnetohydrodynamic modeling [S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)] to compute the plasma response to three-dimensional magnetic perturbations. This workflow was created in conjunction with a DIII-D experiment examining the effect of triangularity on the 3D plasma response. Several versions of the workflow were developed, and the initial ones were used to help guide experimental planning (e.g., determining the plasma current necessary to maintain the constant edge safety factor in various shapes). Subsequent validation with the experimental results was then used to revise the workflow, ultimately resulting in the complete model presented here. We show that quantitative agreement was achieved between the M3D-C1 plasma response calculated for equilibria generated by the final workflow and equilibria reconstructed from experimental data. A comparison of results from earlier workflows is used to show the importance of properly matching certain experimental parameters in the generated equilibria, including the normalized β, pedestal density, and q95. On the other hand, the details of the pedestal

F.E. analysis of seismic isolators: comparison with experimental results

International Nuclear Information System (INIS)

Fuller, K.N.G.; Gough, J.; Ahmadi, H.R.

1998-01-01

Analysis of seismic isolators is performed by the ABAQUS code. The force deformation behaviour of a circular layer of rubber bonded to rigid surface was investigated. This model is chosen because of its simplicity and the relatively short processing time required. A 3-dimensional model was used for finite element calculations. Comparison of calculated values with experimental results is shown

Equine Assisted Therapy and Changes in Gait for a Young Adult Female with Down Syndrome

Directory of Open Access Journals (Sweden)

Katherine J. Coffey

2015-10-01

Full Text Available The purpose of this study was to examine the effects of equine assisted therapy on selected gait parameters in a person with Down syndrome. One female participant with Down syndrome completed two therapeutic horseback riding programs, each consisting of six riding sessions. Specific gait characteristics were analyzed with a trend analysis of the data by examining the means of the different variables. The trend analysis revealed a difference in stride length as well as hip and knee angle. These results indicate that over the course of the two therapeutic horseback riding programs, changes in gait occurred. Therefore, therapeutic horseback riding may have the potential to benefit gait characteristics and stability in young adult females with Down syndrome; however, further research is warranted.

Evaluation of ride-quality and incidence of seasickness. 4. Motion sickness incidence and change of facial expression; Senpaku no norigokochi hyoka ni kansuru kenkyu ( 4 ). Norimonoyoi hasshoji no hyojo no henka

Energy Technology Data Exchange (ETDEWEB)

Arima, M.; Hirai, T.; Hosoda, R. [Osaka City Univ. (Japan)

1998-12-31

This paper studies the method of predicting and evaluating the motion sickness incidence from subject`s facial expressions during the whole-body exposure to oscillations. The facial expressions are recorded with a video camera which can measure them without invasion physiologically and mentally. Facial parameters, which are considered to relate to the motion sickness incidence, are selected, measured and analyzed quantitatively, and a method of evaluating the motion sickness incidence objectively from the facial expressions is proposed. Three facial expression parameters now selected to evaluate the motion sickness incidence are brow width, eye opening and mouth opening. It was clarified that the motion sickness incidence could be expressed joining the above parameters together. This paper consists of three sections, viz. Oscillation experiment for ride-quality evaluation, Measurement and analysis of facial expressions, and Modeling for evaluating facial expressions. 11 refs., 5 figs., 5 tabs.

A Semiactive and Adaptive Hybrid Control System for a Tracked Vehicle Hydropneumatic Suspension Based on Disturbance Identification

Directory of Open Access Journals (Sweden)

Shousong Han

2017-01-01

Full Text Available The riding conditions for a high-speed tracked vehicle are quite complex. To enhance the adaptability of suspension systems to different riding conditions, a semiactive and self-adaptive hybrid control strategy based on disturbance velocity and frequency identification was proposed. A mathematical model of the semiactive, self-adaptive hybrid suspension control system, along with a performance evaluation function, was established. Based on a two-degree-of-freedom (DOF suspension system, the kinematic relations and frequency zero-crossing detection method were defined, and expressions for the disturbance velocity and disturbance frequency of the road were obtained. Optimal scheduling of the semiactive hybrid damping control gain (csky, cground, chybrid and self-adaptive control gain (cv under different disturbances were realized by exploiting the particle swarm multiobjective optimization algorithm. An experimental study using a carefully designed test rig was performed under a number of typical riding conditions of tracked vehicles, and the results showed that the proposed control strategy is capable of accurately recognizing different disturbances, shifting between control modes (semiactive/self-adaptive, and scheduling the damping control gain according to the disturbance identification outcomes; hence, the proposed strategy could achieve a good trade-off between ride comfort and ride safety and efficiently increase the overall performance of the suspension under various riding conditions.

Experimental investigation and exergy analysis of a triple fluid vapor absorption refrigerator

International Nuclear Information System (INIS)

Jemaa, Radhouane Ben; Mansouri, Rami; Boukholda, Ismail; Bellagi, Ahmed

2016-01-01

Highlights: • Experimental study on a commercial triple fluid vapor absorption refrigerator performed. • An Aspen-hysys model developed and validated with experimental measurements. • Exergy analysis of the unit performed and discussed. • Absorber identified as largest source of irreversibility, followed by solution heat exchanger. - Abstract: This paper presents an energy and exergy analyses of a triple fluid vapor absorption refrigerator working with ammonia as refrigerant, water as absorbent and hydrogen as auxiliary gas. The experimental setup is constituted of a commercial unit equipped with the appropriate metrology. The temperature at the inlet and outlet of every component of the machine, as well as the cabinet and ambient temperature are continuously measured and monitored. A simulation model of the machine is developed using the process simulator Aspen-Hysys. The thermodynamic analysis includes energy and exergy efficiency calculations, destroyed exergy evaluation and degradation of the coefficient of performance (COP) in each component of the refrigerator. The results indicate that the absorber exhibits the largest source of irreversibility followed by the solution heat exchanger. These two components alone are at the origin of 63% of the total degradation of COP.

Low Voltage Ride-Through of Two-Stage Grid-Connected Photovoltaic Systems Through the Inherent Linear Power-Voltage Characteristic

DEFF Research Database (Denmark)

Yang, Yongheng; Sangwongwanich, Ariya; Liu, Hongpeng

2017-01-01

In this paper, a cost-effective control scheme for two-stage grid-connected PhotoVoltaic (PV) systems in Low Voltage Ride-Through (LVRT) operation is proposed. In the case of LVRT, the active power injection by PV panels should be limited to prevent from inverter over-current and also energy...... aggregation at the dc-link, which will challenge the dc-link capacitor lifetime if remains uncontrolled. At the same time, reactive currents should be injected upon any demand imposed by the system operators. In the proposed scheme, the two objectives can be feasibly achieved. The active power is regulated...... point tracking controller without significant hardware or software modifications. In this way, the PV system will not operate at the maximum power point, whereas the inverter will not face any over-current challenge but can provide reactive power support in response to the grid voltage fault...

Power Hardware In The Loop Validation of Fault Ride Through of VSC HVDC Connected Offshore Wind Power Plants

DEFF Research Database (Denmark)

Sharma, Ranjan; Wu, Qiuwei; Cha, Seung-Tae

2014-01-01

This paper presents the power hardware in the loop (PHIL) validation of a feed forward DC voltage control scheme for the fault ride through (FTR) of voltage source converter (VSC) high voltage DC (HVDC) connected offshore wind power plants (WPPs). In the proposed FRT scheme, the WPP collector...... network AC voltage is actively controlled by considering both the DC voltage error and the AC current from the WPP AC collector system which ensures fast and robust FRT of the VSC HVDC connected offshore WPPs. The PHIL tests were carried out in order to verify the efficacy of the proposed feed forward DC...... voltage control scheme for enhancing the FRT capability of the VSC HVDC connected WPPs. The PHIL test results have demonstrated the proper control coordination between the offshore WPP and the WPP side VSC and the efficient FRT of the VSC HVDC connected WPPs....

Experimental and theoretical analysis of a hybrid solar thermoelectric generator with forced convection cooling

Science.gov (United States)

Sundarraj, Pradeepkumar; Taylor, Robert A.; Banerjee, Debosmita; Maity, Dipak; Sinha Roy, Susanta

2017-01-01

Hybrid solar thermoelectric generators (HSTEGs) have garnered significant research attention recently due to their potential ability to cogenerate heat and electricity. In this paper, theoretical and experimental investigations of the electrical and thermal performance of a HSTEG system are reported. In order to validate the theoretical model, a laboratory scale HSTEG system (based on forced convection cooling) is developed. The HSTEG consists of six thermoelectric generator modules, an electrical heater, and a stainless steel cooling block. Our experimental analysis shows that the HSTEG is capable of producing a maximum electrical power output of 4.7 W, an electrical efficiency of 1.2% and thermal efficiency of 61% for an average temperature difference of 92 °C across the TEG modules with a heater power input of 382 W. These experimental results of the HSTEG system are found to be in good agreement with the theoretical prediction. This experimental/theoretical analysis can also serve as a guide for evaluating the performance of the HSTEG system with forced convection cooling.

The Development of the Model for the Park and Ride System in the Major Lithuanian Cities

Directory of Open Access Journals (Sweden)

Vytautas Palevičius

2014-10-01

Full Text Available Park and Ride (P&R is the original transport system of public passengers, acting as a traditional supplement of public transport. The system is becoming widely popular in European cities. The central core of this system is composed of parking facilities in the specified parking areas at the approaches to the city with connections to public transport or special buses that allow people reach the city centre. The P&R system is based on a reduction in car density in the city centre as well as on a decrease in traffic noise, air and visual pollution. Furthermore, the P&R system is an economical and time-saving way to travel. This article has been prepared according to structural support provided by the European Union (EU for the purpose of developing the P&R system in five major Lithuanian cities – Vilnius, Kaunas, Klaipeda, Siauliai and Panevezys. Therefore, this paper is aimed at the development and application of the theoretical model of the P&R system to Lithuanian cities according to external good and bad practice.

Steady and unsteady experimental analysis of a turbocharger for automotive applications

International Nuclear Information System (INIS)

Bontempo, R.; Cardone, M.; Manna, M.; Vorraro, G.

2015-01-01

Highlights: • Steady and unsteady characteristics of a turbocharger are analysed by experimental means. • The steady state characteristic maps are obtained for both the compressor and the turbine. • The validity of the classical adiabatic assumption is questioned. • The compressor efficiency evaluated through the adiabatic assumption may lead to a 5–10% relative error. • The mild and deep compressor surge phenomena have been experimentally investigated. - Abstract: The paper describes the steady and unsteady performance characteristics of a small size turbocharger typically employed in automotive downsized engine applications. The analysis is carried out by experimental means using an innovative hot gas generator system specifically designed for turbocharger testing which is capable of delivering a wide range of flow rates with adequate thermodynamic characteristics. More in detail, the gas generator consists of a medium size direct injection compression ignition Internal Combustion Engine (ICE) feeding the turbine of the test article. To independently set the hot gas mass flow rate and the turbine inlet temperature, the operating parameters of the aforementioned ICE are specified through an electronic control unit in a fully automated manner. Compared to previously presented data [1] (Energy Procedia, vol. 45, pp 1116-1125, 2014), those reported herein have been collected with the help of newly installed equipment and controlling software allowing for the estimation of the thermal power transferred from the turbocharger to the environment. In particular, thanks to a first law analysis, the collected measurements have shown that the algebraic sum of the thermal power transferred to the lubricating oil as well as to the environment is roughly speaking 20–30% of the compressor total enthalpy change per unit time. Moreover, it has been shown that evaluating the compressor efficiency through classical expression based on the adiabatic assumption leads to

Speech Is Silver, Silence Is Golden

Directory of Open Access Journals (Sweden)

Hakan J. Holm

2013-08-01

Full Text Available This paper experimentally investigates free-riding behavior on communication cost in a coordination game and finds strong indications of such free-riding. Firstly, the subjects wait for others to send a message when communication is costly, which does not happen when communication is costless. Secondly, the proportion of games where no communication or one-way communication takes place is much higher when communication is costly compared to when it is free.

Improved fault ride through capability of DFIG based wind turbines using synchronous reference frame control based dynamic voltage restorer.

Science.gov (United States)

Rini Ann Jerin, A; Kaliannan, Palanisamy; Subramaniam, Umashankar

2017-09-01

Fault ride through (FRT) capability in wind turbines to maintain the grid stability during faults has become mandatory with the increasing grid penetration of wind energy. Doubly fed induction generator based wind turbine (DFIG-WT) is the most popularly utilized type of generator but highly susceptible to the voltage disturbances in grid. Dynamic voltage restorer (DVR) based external FRT capability improvement is considered. Since DVR is capable of providing fast voltage sag mitigation during faults and can maintain the nominal operating conditions for DFIG-WT. The effectiveness of the DVR using Synchronous reference frame (SRF) control is investigated for FRT capability in DFIG-WT during both balanced and unbalanced fault conditions. The operation of DVR is confirmed using time-domain simulation in MATLAB/Simulink using 1.5MW DFIG-WT. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

An improved low-voltage ride-through performance of DFIG based wind plant using stator dynamic composite fault current limiter.

Science.gov (United States)

Gayen, P K; Chatterjee, D; Goswami, S K

2016-05-01

In this paper, an enhanced low-voltage ride-through (LVRT) performance of a grid connected doubly fed induction generator (DFIG) has been presented with the usage of stator dynamic composite fault current limiter (SDCFCL). This protection circuit comprises of a suitable series resistor-inductor combination and parallel bidirectional semiconductor switch. The SDCFCL facilitates double benefits such as reduction of rotor induced open circuit voltage due to increased value of stator total inductance and concurrent increase of rotor impedance. Both effects will limit rotor circuit over current and over voltage situation more secured way in comparison to the conventional scheme like the dynamic rotor current limiter (RCL) during any type of fault situation. The proposed concept is validated through the simulation study of the grid integrated 2.0MW DFIG. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Assessment of control strategies for fault ride through of SCIG-based wind energy conversion systems

Directory of Open Access Journals (Sweden)

Manaullah

2016-01-01

Full Text Available With increasing penetration of wind energy into the power grid, researchers have started focusing more on control and coordination of wind energy conversion systems (WECS with the other components at system level, especially during fault. It is important to implement a suitable fault ride through control strategy to avoid tripping of the generators when the power system is subjected to voltage dips normally below 90% of nominal voltage. The dips below 90% may lead to a significant loss of generation and frequency collapse, followed by a blackout. This article implements and assesses the methodologies to deal with such situations for squirrel cage induction generator-based wind energy conversion systems employing fully rated power electronic converters. Three distinct control techniques—namely, balanced positive sequence control, positive negative sequence control, and dual current control—have been simulated and applied to grid side converter of SCIG-based WECS. The performance of all the three control strategies has been compared and presented in this work. During this study, the system is subjected to the most common unsymmetrical line to ground (LG fault and most severe symmetrical LLL fault on grid for the purpose of anaysis.

Coordinated control for low voltage ride-through of a PMSG-based wind power plant

Directory of Open Access Journals (Sweden)

Khagendra Thapa

2016-01-01

Full Text Available Wind turbine generators should be kept connected to a power grid, while supporting the voltage recovery in the case of a grid fault to meet low voltage ride-through requirement in some grid codes. This paper proposes a coordinated control scheme that prevents the increase in the DC-link voltage by reducing the active power in the machine side converter of permanent magnet synchronous generators (PMSGs in proportion to the voltage dip at the terminal of PMSGs. The proposed scheme changes the current priorities from the active current to the reactive current to inject more reactive power for a severe fault depending on the voltage dip. In addition, the grid-side converter operates in a voltage control mode with the slope, which is the ratio of reactive current capability to the voltage tolerance around a rated value. Moreover, during the fault, the slope is changed depending on the voltage dip to inject more reactive current. The performance of the proposed scheme is validated for a wind power plant consisting of 20 units of 5-MW PMSGs using an EMTP-RV simulator. The results demonstrate that the scheme enables the PMSGs not only to survive during the fault, but also to provide a dynamic reactive power support.

Analysis of Elektrogorsk 108 test facility experimental data

International Nuclear Information System (INIS)

Urbonas, R.

2001-01-01

In the paper an evaluation of experimental data obtained at Russian Elektrogorsk 108 (E-108) test facility is presented. E-108 facility is a scaled model of Russian RBMK design reactor. An attempt to validate state-of-the-art thermal hydraulic codes on the basis of E-108 test facility was made. Originally these codes were developed and validated for BWRs and PWRs. Since state-of-art thermal hydraulic codes are widely used for simulation of RBMK reactors further codes' implementation and validation is required. The facility was modelled by employing RELAP5 (INEEL, USA) thermal hydraulic system analysis best estimate code. The results show dependence from number of nodes used in the heated channels, frictional and form losses employed. The obtained oscillatory behaviour is resulted by density wave and critical heat flux. It is shown that codes are able to predict thermal hydraulic instability and sudden heat structure temperature excursion, when critical heat flux is approached, well. In addition, an uncertainty analysis of one of the experiments was performed by employing GRS developed System for Uncertainty and Sensitivity Analysis (SUSA). It was one of the first attempts to use this statistic-based methodology in Lithuania.(author)

Experimental analysis of natural convection within a thermosyphon

International Nuclear Information System (INIS)

Clarksean, R.

1993-01-01

The heat transfer characteristics of a thermosyphon designed to passively cool cylindrical heat sources are experimentally studied. The analysis is based on recognizing the physics of the flow within different regions of the thermosyphon to develop empirical heat transfer correlations. The basic system consists of three concentric cylinders, with an outer channel between the outer two cylinders, and an inner channel between the inner two cylinders. Tests were conducted. with two different process material container diameters, representing the inner cylinder, and several different power levels. The experimentally determined local and average Nu numbers for the inner channel are in good agreement with previous work for natural convection between vertical parallel plates, one uniformly heated and the other thermally insulated. The implication is that the heat transfer off of each surface is independent of the adjacent surface for sufficiently high Ra numbers. The heat transfer is independent because of limited interaction between the boundary layers at sufficiently high Ra numbers. As a result of the limited interaction, the maximum temperature within the system remained constant, or decreased slightly when the radii of the inner cylinders increased for the same amount of heat removal

Analysis of modal frequency optimization of railway vehicle car body

Directory of Open Access Journals (Sweden)

Wenjing Sun

2016-04-01

Full Text Available High structural modal frequencies of car body are beneficial as they ensure better vibration control and enhance ride quality of railway vehicles. Modal sensitivity optimization and elastic suspension parameters used in the design of equipment beneath the chassis of the car body are proposed in order to improve the modal frequencies of car bodies under service conditions. Modal sensitivity optimization is based on sensitivity analysis theory which considers the thickness of the body frame at various positions as variables in order to achieve optimization. Equipment suspension design analyzes the influence of suspension parameters on the modal frequencies of the car body through the use of an equipment-car body coupled model. Results indicate that both methods can effectively improve the modal parameters of the car body. Modal sensitivity optimization increases vertical bending frequency from 9.70 to 10.60 Hz, while optimization of elastic suspension parameters increases the vertical bending frequency to 10.51 Hz. The suspension design can be used without alteration to the structure of the car body while ensuring better ride quality.

Experimental and numerical analysis of a small-scale turbojet engine

International Nuclear Information System (INIS)

Badami, M.; Nuccio, P.; Signoretto, A.

2013-01-01

Highlights: • A theoretical and experimental activity was performed on a small scale turbojet. • The small turbojet shows the typical CO, UHC and NO x trends of aero-engines emissions. • The comparison between the CFD and experimental results show a quite good agreement. • The CFD analysis permitted to interpret some unexpected behaviour of thermodynamic parameters. • This essential knowledge of the research will be applied in a subsequent research on the use of alternative fuels. - Abstract: Since experimental activities on real aeronautical turbines can be very complex and expensive, the use of parts of real engines or small-size turbojets can be very useful for research activities. The present paper describes the results of an experimental and numerical activity that was conducted on a research turbojet engine, with a nominal thrust of 80 N at 80,000 rpm. The aim of the research was to obtain detailed information on the thermodynamic cycle and performance of the engine in order to use it in subsequent activities on the benefits of using alternative fuels in gas turbine engines. A specific characterization of each component of the engine has been performed by means of thermodynamics and CFD analyses and several measured parameters have been critically analyzed and compared with theoretical ones, with the purpose of increasing the knowledge of these kinds of small turbo-engines

Numerical and Experimental Analysis of Aircraft Wing Subjected to Fatigue Loading

Directory of Open Access Journals (Sweden)

Hatem Rahim Wasmi

2016-10-01

Full Text Available This study deals with the aircraft wing analysis (numerical and experimental which subjected to fatigue loading in order to analyze the aircraft wing numerically by using ANSYS 15.0 software and experimentally by using loading programs which effect on fatigue test specimens at laboratory to estimate life of used metal (aluminum alloy 7075-T651 the wing metal and compare between numerical and experimental work, as well as to formulate an experimental mathematical model which may find safe estimate for metals and most common alloys that are used to build aircraft wing at certain conditions. In experimental work, a (34 specimen of (aluminum alloy 7075-T651 were tested using alternating bending fatigue machine rig. The test results are ; (18 Specimen to establish the (S-N curve and endurance limit and the other specimens used for variable amplitude tests were represented by loading programs which represents actual flight conditions. Also it has been obtained the safe fatigue curves which are described by mathematical formulas. ANSYS results show convergence with experimental results about cumulative fatigue damage (D, a mathematical model is proposed to estimate the life; this model gives good results in case of actual loading programs. Also, Miner and Marsh rules are applied to the specimens and compared with the proposal mathematical model in order to estimate the life of the wing material under actual flight loading conditions, comparing results show that it is possible to depend on present mathematical model than Miner and Marsh theories because the proposal mathematical model shows safe and good results compared with experimental work results.

Development and implantation of application systems for reduction and analysis of experimental data in Nuclear Physics area

International Nuclear Information System (INIS)

Cardoso Junior, J.L.; Schelin, H.R.; Lemos, B.J.K.C.; Tanaka, E.H.; Castro, A.T.C.G.

1984-01-01

Several application systems for reduction and analysis of experimental data are described. These codes were development and/or implanted in tee IEAv/CTA CYBER 170/750 system. A brief description of the experimental data acquisition modes and the necessary reduction for analysis is given. Information on the purposes, uses and access of the codes are given [pt

Experimental study on the operators' cognitive behavior analysis for the plant anomaly diagnosis

International Nuclear Information System (INIS)

Takahashi, Makoto; Kubo, Osamu; Yasuta, Akira

1996-01-01

In this paper, a method of human cognitive state estimation based on physiological measures has been applied to the analysis of cognitive behavior during anomaly diagnosis observed with nuclear power plant simulator. This method has also been combined with the conventional experimental protocol such as operational sequence and questionnaire results. The simulator experiments have been performed using plant experts and the results demonstrate that the cognitive state estimation method can be an effective way for understanding cognitive behavior during the anomaly diagnosis of the nuclear power plant. It has also been shown from the results that the combined use of the human cognitive state estimation and the conventional experimental protocol can provide effective information in decreasing the ambiguity of the analysis results. (author)

Short-Circuit Current Analysis for DFIG Wind Farm Considering the Action of a Crowbar

OpenAIRE

Yan Hong Yuan; Feng Wu

2018-01-01

With the increasing capacity of wind farms integrated into the power grid, the short-circuit current analysis for wind farms becomes more and more important. Since the wind turbine is usually integrated into the power grid via power electronic devices, the “crowbar” is installed in the wind turbine to protect the power electronic devices and to improve the fault ride through capability. The impact of the crowbar has to be considered during the short-circuit current analysis for the wind farm....

The Etymology of Basic Concepts in the Experimental Analysis of Behavior

Science.gov (United States)

Dinsmoor, James A.

2004-01-01

The origins of many of the basic concepts used in the experimental analysis of behavior can be traced to Pavlov's (1927/1960) discussion of unconditional and conditional reflexes in the dog, but often with substantial changes in meaning (e.g., stimulus, response, and reinforcement). Other terms were added by Skinner (1938/1991) to describe his…

Development of a thermal-hydraulic code for reflood analysis in a PWR experimental loop

International Nuclear Information System (INIS)

Alves, Sabrina P.; Mesquita, Amir Z.; Rezende, Hugo C.; Palma, Daniel A.P.

2017-01-01

A process of fundamental importance in the event of Loss of Coolant Accident (LOCA) in Pressurized Water nuclear Reactors (PWR) is the reflood of the core or rewetting of nuclear fuels. The Nuclear Technology Development Center (CDTN) has been developing since the 70’s programs to allow Brazil to become independent in the field of reactor safety analysis. To that end, in the 80’s was designed, assembled and commissioned one Rewetting Test Facility (ITR in Portuguese). This facility aims to investigate the phenomena involved in the thermal hydraulic reflood phase of a Loss of Coolant Accident in a PWR nuclear reactor. This work aim is the analysis of physical and mathematical models governing the rewetting phenomenon, and the development a thermo-hydraulic simulation code of a representative experimental circuit of the PWR reactors core cooling channels. It was possible to elaborate and develop a code called REWET. The results obtained with REWET were compared with the experimental results of the ITR, and with the results of the Hydroflut code, that was the old program previously used. An analysis was made of the evolution of the wall temperature of the test section as well as the evolution of the front for two typical tests using the two codes calculation, and experimental results. The result simulated by REWET code for the rewetting time also came closer to the experimental results more than those calculated by Hydroflut code. (author)

Development of a thermal-hydraulic code for reflood analysis in a PWR experimental loop

Energy Technology Data Exchange (ETDEWEB)

Alves, Sabrina P.; Mesquita, Amir Z.; Rezende, Hugo C., E-mail: sabrinapral@gmail.com, E-mail: amir@cdtn.brm, E-mail: hcr@cdtn.br, E-mail: hcr@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Palma, Daniel A.P., E-mail: dapalma@cnen.gov.br [Comissão Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

2017-07-01

A process of fundamental importance in the event of Loss of Coolant Accident (LOCA) in Pressurized Water nuclear Reactors (PWR) is the reflood of the core or rewetting of nuclear fuels. The Nuclear Technology Development Center (CDTN) has been developing since the 70’s programs to allow Brazil to become independent in the field of reactor safety analysis. To that end, in the 80’s was designed, assembled and commissioned one Rewetting Test Facility (ITR in Portuguese). This facility aims to investigate the phenomena involved in the thermal hydraulic reflood phase of a Loss of Coolant Accident in a PWR nuclear reactor. This work aim is the analysis of physical and mathematical models governing the rewetting phenomenon, and the development a thermo-hydraulic simulation code of a representative experimental circuit of the PWR reactors core cooling channels. It was possible to elaborate and develop a code called REWET. The results obtained with REWET were compared with the experimental results of the ITR, and with the results of the Hydroflut code, that was the old program previously used. An analysis was made of the evolution of the wall temperature of the test section as well as the evolution of the front for two typical tests using the two codes calculation, and experimental results. The result simulated by REWET code for the rewetting time also came closer to the experimental results more than those calculated by Hydroflut code. (author)

Numerical modeling and experimental investigation of the local hydrology of a porous concrete site.

Science.gov (United States)

2011-10-01

Although porous pavement use has been accepted as a successful stormwater management practice in warm climates, application in regions with colder climates, like New England, is still under investigation. The Randolph Park and Ride Site, which is the...

Statistics in experimental design, preprocessing, and analysis of proteomics data.

Science.gov (United States)

Jung, Klaus

2011-01-01

High-throughput experiments in proteomics, such as 2-dimensional gel electrophoresis (2-DE) and mass spectrometry (MS), yield usually high-dimensional data sets of expression values for hundreds or thousands of proteins which are, however, observed on only a relatively small number of biological samples. Statistical methods for the planning and analysis of experiments are important to avoid false conclusions and to receive tenable results. In this chapter, the most frequent experimental designs for proteomics experiments are illustrated. In particular, focus is put on studies for the detection of differentially regulated proteins. Furthermore, issues of sample size planning, statistical analysis of expression levels as well as methods for data preprocessing are covered.

Modeling and Control System Design for an Integrated Solar Generation and Energy Storage System with a Ride-Through Capability: Preprint

Energy Technology Data Exchange (ETDEWEB)

Wang, X.; Yue, M.; Muljadi, E.

2012-09-01

This paper presents a generic approach for PV panel modeling. Data for this modeling can be easily obtained from manufacturer datasheet, which provides a convenient way for the researchers and engineers to investigate the PV integration issues. A two-stage power conversion system (PCS) is adopted in this paper for the PV generation system and a Battery Energy Storage System (BESS) can be connected to the dc-link through a bi-directional dc/dc converter. In this way, the BESS can provide some ancillary services which may be required in the high penetration PV generation scenario. In this paper, the fault ride-through (FRT) capability is specifically focused. The integrated BESS and PV generation system together with the associated control systems is modeled in PSCAD and Matlab platforms and the effectiveness of the controller is validated by the simulation results.

Adult attention-deficit hyperactivity disorder, risky behaviors, and motorcycle injuries: a case-control study

Directory of Open Access Journals (Sweden)

Sadeghi-Bazargani H

2015-08-01

Full Text Available Homayoun Sadeghi-Bazargani,1,2 Leili Abedi,3 Minoo Mahini,4 Shahrokh Amiri,5 Davoud Khorasani-Zavareh6 1Road Traffic Injury Research Center, Tabriz University of Medical Sciences, Tabriz, Iran; 2World Health Organization Collaborating Center on Safe Community Promotion, Stockholm, Sweden; 3Department of Statistics and Epidemiology, Faculty of Health, Tabriz University of Medical Sciences, Tabriz, 4Department of Counseling, Aras International Campus, University of Tehran, Jolfa, 5Research Center of Psychiatry and Behavioral Sciences, Faculty of Medicine, Tabriz University of Medical Sciences, Tabriz, 6Social Determinants of Health Research Center, Urmia University of Medical Sciences, Urmia, Iran Background: The aim of this study was to assess the association of motorcycle traffic injuries with motorcycle riding behavior and subtypes of attention-deficit hyperactivity disorder (ADHD while controlling for individual correlates of motorcycle traffic injuries.Methods: A case-control study was carried out in 298 patients with motorcycle trauma along with 151 control patients admitted to the Shohada and Imam Reza university hospitals as the two referral specialty centers in the East Azarbyjan Province of Iran in 2013. The Persian version of the Motorcycle Riding Behavior Questionnaire and the Persian version of Conner’s Adult ADHD Rating Scales (the self-report short version were used to assess riding behavior and screen for adult ADHD, respectively. The scale has four subscales, comprising subscale A (inattention, subscale B (hyperactivity, impulsivity, subscale C (A + C, and subscale D (ADHD index. The statistical analysis was done using Stata version 11.Results: All subjects were male and aged 13–79 years. Approximately 54% of the participants were married and 13% had academic education. Approximately 18% of the motorcycle riders stated that their motorcycle riding was only for fun purposes. More than two thirds of the participants did not

Analytical and Experimental Evaluation of Digital Control Systems for the Semi-Span Super-Sonic Transport (S4T) Wind Tunnel Model

Science.gov (United States)

Wieseman, Carol D.; Christhilf, David; Perry, Boyd, III

2012-01-01

An important objective of the Semi-Span Super-Sonic Transport (S4T) wind tunnel model program was the demonstration of Flutter Suppression (FS), Gust Load Alleviation (GLA), and Ride Quality Enhancement (RQE). It was critical to evaluate the stability and robustness of these control laws analytically before testing them and experimentally while testing them to ensure safety of the model and the wind tunnel. MATLAB based software was applied to evaluate the performance of closed-loop systems in terms of stability and robustness. Existing software tools were extended to use analytical representations of the S4T and the control laws to analyze and evaluate the control laws prior to testing. Lessons were learned about the complex windtunnel model and experimental testing. The open-loop flutter boundary was determined from the closed-loop systems. A MATLAB/Simulink Simulation developed under the program is available for future work to improve the CPE process. This paper is one of a series of that comprise a special session, which summarizes the S4T wind-tunnel program.

2000 CKM-triangle analysis a critical review with updated experimental inputs and theoretical parameters

International Nuclear Information System (INIS)

Roudeau, P.; Stocchi, A.; Ciuchini, M.; Lubicz, V.; D'Agostini, G.; Franco, E.; Martinelli, G.; Parodi, F.

2000-12-01

Within the Standard Model, a review of the current determination of the sides and angles of the CKM unitarity triangle is presented, using experimental constraints from the measurements of |ε K |, |V ub /V cb |, Δm d and from the limit on Δm s , available in September 2000. Results from the experimental search for B 0 s -B-bar 0 s oscillations are introduced in the present analysis using the likelihood. Special attention is devoted to the determination of the theoretical uncertainties. The purpose of the analysis is to infer regions where the parameters of interest lie with given probabilities. The BaBar '95% C.L. scanning' method is also commented. (authors)

Experimental analysis of influence of different lubricants types on the multi-phase ironing process

Directory of Open Access Journals (Sweden)

Milan Djordjević

2013-05-01

Full Text Available This paper is aimed at presenting results of an experimental analysis of the different types of lubricants influence on the multi-phase ironing process. Based on sliding of the metal strip between the two contact elements a special tribological model was adopted. The subject of experimental investigations was variations of the drawing force, contact pressure and the friction coefficient for each type of the applied lubricants. The ironing process was conducted in three-phases at the constant sliding velocity. The objective of this analysis was to compare all the applied lubricants in order to estimate their quality from the point of view of their applicability in the multi-phase ironing process.

EXPERIMENTAL ANALYSIS OF INFLUENCE OF DIFFERENT LUBRICANTS TYPES ON THE MULTI-PHASE IRONING PROCESS

Directory of Open Access Journals (Sweden)

Milan Djordjević

2013-09-01

Full Text Available This paper is aimed at presenting results of an experimental analysis of the different types of lubricants influence on the multi-phase ironing process. Based on sliding of the metal strip between the two contact elements a special tribological model was adopted. The subject of experimental investigations was variations of the drawing force, contact pressure and the friction coefficient for each type of the applied lubricants. The ironing process was conducted in three-phases at the constant sliding velocity. The objective of this analysis was to compare all the applied lubricants in order to estimate their quality from the point of view of their applicability in the multi-phase ironing process.

CFD Analysis of Experimental Wing and Winglet for FalconLAUNCH 8 and the ExFIT Program

Science.gov (United States)

2010-03-01

the interaction of the winglet shock wave with the main wing. It is important to note here that the main wing has both aerodynamic and geometric twist...CFD Analysis of Experimental Wing and Winglet for FalconLAUNCH 8 and the ExFIT Program THESIS Benjamin P. Switzer, Second Lieutenant, USAF AFIT/GAE...to copyright protection in the United States. AFIT/GAE/ENY/10-M25 CFD Analysis of Experimental Wing and Winglet for FalconLAUNCH 8 and the ExFIT

Experimental determination of the fluid velocity by spectral analysis of temperature fluctuations

International Nuclear Information System (INIS)

Foucrier, M.J.; Faya, A.J.G.

1988-12-01

Local velocities of turbulent closed channel flow were measured applying the noise analysis technique to signals coming from two sensors separated by a know distance. Good agreement was found when comparing experimental data to more accurate measurements. Ranges of Reynolds number and thermocouple spacial separation are recommended. (author) [pt

Experimental and numerical analysis of interlocking rib formation at sheet metal blanking

Science.gov (United States)

Bolka, Špela; Bratuš, Vitoslav; Starman, Bojan; Mole, Nikolaj

2018-05-01

Cores for electrical motors are typically produced by blanking of laminations and then stacking them together, with, for instance, interlocking ribs or welding. Strict geometrical tolerances, both on the lamination and on the stack, combined with complex part geometry and harder steel strip material, call for use of predictive methods to optimize the process before actual blanking to reduce the costs and speed up the process. One of the major influences on the final stack geometry is the quality of the interlocking ribs. A rib is formed in one step and joined with the rib of the preceding lamination in the next. The quality of the joint determines the firmness of the stack and also influences its. The geometrical and positional accuracy is thus crucial in rib formation process. In this study, a complex experimental and numerical analysis of interlocking rib formation has been performed. The aim of the analysis is to numerically predict the shape of the rib in order to perform a numerical simulation of the stack formation in the next step of the process. A detailed experimental research has been performed in order to characterize influential parameters on the rib formation and the geometry of the ribs itself, using classical and 3D laser microscopy. The formation of the interlocking rib is then simulated using Abaqus Explicit. The Hilll 48 constitutive material model is based on extensive and novel material characterization process, combining data from in-plane and out-of-plane material tests to perform a 3D analysis of both, rib formation and rib joining. The study shows good correlation between the experimental and numerical results.

Riding through red lights: the rate, characteristics and risk factors of non-compliant urban commuter cyclists.

Science.gov (United States)

Johnson, Marilyn; Newstead, Stuart; Charlton, Judith; Oxley, Jennifer

2011-01-01

This study determined the rate and associated factors of red light infringement among urban commuter cyclists. A cross-sectional observational study was conducted using a covert video camera to record cyclists at 10 sites across metropolitan Melbourne, Australia from October 2008 to April 2009. In total, 4225 cyclists faced a red light and 6.9% were non-compliant. The main predictive factor for infringement was direction of travel, cyclists turning left (traffic travels on the left-side in Australia) had 28.3 times the relative odds of infringement compared to cyclists who continued straight through the intersection. Presence of other road users had a deterrent effect with the odds of infringement lower when a vehicle travelling in the same direction was present (OR=0.39, 95% CI 0.28-0.53) or when other cyclists were present (OR=0.26, 95% CI 0.19-0.36). Findings suggest that some cyclists do not perceive turning left against a red signal to be unsafe and the opportunity to ride through the red light during low cross traffic times influences the likelihood of infringement. Copyright © 2010 Elsevier Ltd. All rights reserved.

Statistical analysis on experimental calibration data for flowmeters in pressure pipes

Science.gov (United States)

Lazzarin, Alessandro; Orsi, Enrico; Sanfilippo, Umberto

2017-08-01

This paper shows a statistical analysis on experimental calibration data for flowmeters (i.e.: electromagnetic, ultrasonic, turbine flowmeters) in pressure pipes. The experimental calibration data set consists of the whole archive of the calibration tests carried out on 246 flowmeters from January 2001 to October 2015 at Settore Portate of Laboratorio di Idraulica “G. Fantoli” of Politecnico di Milano, that is accredited as LAT 104 for a flow range between 3 l/s and 80 l/s, with a certified Calibration and Measurement Capability (CMC) - formerly known as Best Measurement Capability (BMC) - equal to 0.2%. The data set is split into three subsets, respectively consisting in: 94 electromagnetic, 83 ultrasonic and 69 turbine flowmeters; each subset is analysed separately from the others, but then a final comparison is carried out. In particular, the main focus of the statistical analysis is the correction C, that is the difference between the flow rate Q measured by the calibration facility (through the accredited procedures and the certified reference specimen) minus the flow rate QM contemporarily recorded by the flowmeter under calibration, expressed as a percentage of the same QM .

Experimental display of Fourier analysis through the optical physics and its didatical utilization

International Nuclear Information System (INIS)

Oliveira, S.M.M. de.

1983-01-01

The properties of Fourier analysis through physical optics are displayed experimentally. Within physical optics topics that illustrate didactically Fourier analysis, a subject usually considered purely mathematical are selected. The most important properties of Fourier transform and their utilization in cleaning up images through spatial filtering are presented, in this way the properties of convolution to analyse image formation and characterize some diffraction patterns are also used. (Author) [pt

6. GESA symposium on experimental stress analysis, May 6 and 7, 1982 Stuttgart

Energy Technology Data Exchange (ETDEWEB)

1982-04-01

Under the scientific chairmanship of Dr. H. Wolf, KWU Muehlheim/Ruhr, the 6th Symposium of the Gemeinschaft Experimentelle Spannungsanalyse (GESA = Experimental Stress Analysis Association) takes place in the Schwabenlandhalle at Fellbach near Stuttgart. The meeting will be organized by VDI/VDE-Gesellschaft Mess- und Regelungstechnik (GMR = VDI/VDE Society for Instrumentation and Control Engineering) located at Duesseldorf. It will be associated with an exposition of firms working in the field of experimental mechanics and presenting among other things developments in the fields of measuring transmitters, data acquisition and processing.

6. GESA symposium on experimental stress analysis, May 6 and 7, 1982 Stuttgart

International Nuclear Information System (INIS)

Anon.

1982-01-01

Under the scientific chairmanship of Dr. H. Wolf, KWU Muehlheim/Ruhr the 6th Symposium of the Gemeinschaft Experimentelle Spannungsanalyse (GESA = Experimental Stress Analysis Association) takes place in the Schwabenlandhalle at Fellbach near Stuttgart. The meeting will be organized by VDI/VDE-Gesellschaft Mess- und Regelungstechnik (GMR = VDI/VDE Society for Instrumentation and Control Engineering) located at Duesseldorf. It will be associated with an exposition of firms working in the field of experimental mechanics and presenting among other things developments in the fields of measuring transmitters, data acquisition and processing. (orig./RW) [de

An experimental and theoretical analysis of void fraction dynamics in a boiling channel

International Nuclear Information System (INIS)

Romberg, T.M.

1977-01-01

This paper describes an experimental and theoretical investigation of the void fraction dynamics at the exit of a test boiling channel which is operated near the 'instability threshold power' (the power level at which coolant flow instabilities occur). Dynamic measurements of the perturbations in channel inlet flow-rate, power input and exit void fraction are analysed using multivariate spectral analysis. The resulting experimental cross-spectral density functions between flow-rate/exit void fraction and power input/exit void fraction agree favourably with those calculated by a linearised hydrodynamic model in the frequency domain. (Author)

Off-road vehicle dynamics analysis, modelling and optimization

CERN Document Server

Taghavifar, Hamid

2017-01-01

This book deals with the analysis of off-road vehicle dynamics from kinetics and kinematics perspectives and the performance of vehicle traversing over rough and irregular terrain. The authors consider the wheel performance, soil-tire interactions and their interface, tractive performance of the vehicle, ride comfort, stability over maneuvering, transient and steady state conditions of the vehicle traversing, modeling the aforementioned aspects and optimization from energetic and vehicle mobility perspectives. This book brings novel figures for the transient dynamics and original wheel terrain dynamics at on-the-go condition.

EXPERIMENTAL ANALYSIS OF THE CHARACTERISTIC PERFORMANCE OF STANDALONE PHOTOVOLTAIC SYSTEM

OpenAIRE

Birendra Kishore; Anirban Nandy*; O.P. Pandey

2016-01-01

This paper demonstrates an insight solar PV Stand Alone system which is a practical model with a halogen light source. At different situations the performance of solar PV cells are analyzed. The system produces power with depending on the change in halogen light intensity & temperature. A theoretical & experimental analysis of the PV cell can be achieved. In this paper the I-V & P-V characteristic of the solar photovoltaic cells with changes in temperature and isolation have been showed. With...

General analysis for experimental studies of time-reversal-violating effects in slow neutron propagation through polarized matter

International Nuclear Information System (INIS)

Lamoreaux, S.K.; Golub, R.

1994-01-01

A general technique is developed for the analysis of proposed experimental studies of possible P,T-violating effects in the neutron-nucleus interaction based on low-energy neutron transmission through polarized matter. The analysis is applied to proposed experimental schemes and we determine the levels at which the absolute neutron polarization, magnetic fields, and target polarization must be controlled in order for these experiments to obtain a given sensitivity to P,T-violating effects

El Calloviense de los Ibérides (dominio Ibérico, España. Síntesis bioestratigráfica

Directory of Open Access Journals (Sweden)

Meléndez, G.

1987-04-01

Full Text Available More than 60 Callovian geological profiles in the Iberides (between Burgos and Alicante have been studied. The Ricla (Zaragoza Callovian section as reference biostratigraphic outline has been established, documenting almost all Callovian Mesogean Zones and Subzones and many biohorizons. The others profiles in relation with the elected as reference are briefly described, standing out the scarce thickness and Upper Callovian and frequently Middle Callovian absence.Se han estudiado más de 60 perfiles geológicos de edad Calloviense en los Ibérides (entre Burgos y Alicante. El Calloviense de Ricla (Zaragoza se toma como esquema bioestratigráfico de referencia, documentándose casi todas las zonas y subzonas y muchos de los biohorizontes del Calloviense de la Mesogea. Los demás perfiles se describen sumariamente en relación al elegido como referencia, destacando su escasa potencia y la falta de Calloviense superior y frecuentemente de Calloviense medio.

Research on Ontology Modeling of Steel Manufacturing Process Based on Big Data Analysis

OpenAIRE

Bao Qing; Wang Jian; Cheng Jin

2016-01-01

As an important method that steel industries ride the Indutrie 4.0 wave, knowledge management is expected to be versatile, effective and intelligent. Mechanism modeling difficulties, numerous influencing factors and complex industrial chains hinder the development of knowledge and information integration. Using data potentials, big data analysis can be an effective way to deal with knowledge acquisition as it solves the inaccuracy and imperfection mechanism modeling may lead to. This paper pr...

Experimental analysis of an air-to-air heat recovery unit for balanced ventilation systems in residential buildings

International Nuclear Information System (INIS)

Fernandez-Seara, Jose; Diz, Ruben; Uhia, Francisco J.; Dopazo, Alberto; Ferro, Jose M.

2011-01-01

This paper deals with the experimental analysis of an air-to-air heat recovery unit equipped with a sensible polymer plate heat exchanger (PHE) for balanced ventilation systems in residential buildings. The PHE is arranged in parallel triangular ducts. An experimental facility was designed to reproduce the typical outdoor and exhaust air conditions with regard to temperature and humidity. The unit was tested under balanced operation conditions, as commonly used in practice. A set of tests was conducted under the reference operating conditions to evaluate the PHE performance. Afterwards, an experimental parametric analysis was conducted to investigate the influence of changing the operating conditions on the PHE performance. Experiments were carried out varying the inlet fresh air temperature, the exhaust air relative humidity and the air flow rate. The experimental results are shown and discussed in this paper.

Comparison of typical inelastic analysis predictions with benchmark problem experimental results

International Nuclear Information System (INIS)

Clinard, J.A.; Corum, J.M.; Sartory, W.K.

1975-01-01

The results of exemplary inelastic analyses are presented for a series of experimental benchmark problems. Consistent analytical procedures and constitutive relations were used in each of the analyses, and published material behavior data were used in all cases. Two finite-element inelastic computer programs were employed. These programs implement the analysis procedures and constitutive equations for Type 304 stainless steel that are currently used in many analyses of elevated-temperature nuclear reactor system components. The analysis procedures and constitutive relations are briefly discussed, and representative analytical results are presented and compared to the test data. The results that are presented demonstrate the feasibility of performing inelastic analyses, and they are indicative of the general level of agreement that the analyst might expect when using conventional inelastic analysis procedures. (U.S.)

Gender role affects experimental pain responses: a systematic review with meta-analysis.

Science.gov (United States)

Alabas, O A; Tashani, O A; Tabasam, G; Johnson, M I

2012-10-01

Gender role refers to the culturally and socially constructed meanings that describe how women and men should behave in certain situations according to feminine and masculine roles learned throughout life. The aim of this meta-analysis was to evaluate the relationship between gender role and experimental pain responses in healthy human participants. We searched computerized databases for studies published between January 1950 and May 2011 that had measured gender role in healthy human adults and pain response to noxious stimuli. Studies were entered into a meta-analysis if they calculated a correlation coefficient (r) for gender role and experimental pain. Searches yielded 4465 'hits' and 13 studies were eligible for review. Sample sizes were 67-235 participants and the proportion of female participants was 45-67%. Eight types of gender role instrument were used. Meta-analysis of six studies (406 men and 539 women) found a significant positive correlation between masculine and feminine personality traits and pain threshold and tolerance, with a small effect size (r = 0.17, p = 0.01). Meta-analysis of four studies (263 men and 297 women) found a significant negative correlation between gender stereotypes specific to pain and pain threshold and tolerance, with a moderate effect size (r = -0.41, p Gender stereotypes specific to pain scales showed stronger associations with sex differences in pain sensitivity response than masculine and feminine personality trait scales. © 2012 European Federation of International Association for the Study of Pain Chapters.

Riding the rapids: living with autism or disability--an evaluation of a parenting support intervention for parents of disabled children.

Science.gov (United States)

Stuttard, Lucy; Beresford, Bryony; Clarke, Susan; Beecham, Jennifer; Todd, Samantha; Bromley, Jo

2014-10-01

Evidence on the effectiveness of interventions to support parents of disabled children to manage their child's behaviour problems is limited. The aim of this study was to evaluate a group-delivered intervention (Riding the Rapids) which was specifically developed for parents of a child with a disability or autistic spectrum condition. This programme has been routinely delivered by a community-based mental health team across an urban, multi-ethnic locality for a number of years. A non-randomised controlled study design comprising an intervention group (n=48) and comparator (no intervention) group (n=28) was used to evaluate the effects of the intervention on child behaviour (Eyberg Child Behaviour Inventory; parent-set goals) and parenting efficacy and satisfaction (Parents Sense of Competence Scale) at post-intervention and six-month follow-up. Data on costs to the service provider of delivering the intervention were also collected. Receipt of the intervention was associated with significant reductions in parent-reported behaviour problems and significant improvements in parenting efficacy and satisfaction. At six-month follow-up, progress towards achieving parent-set child behaviour goals and parenting satisfaction had been maintained. Post hoc analysis suggests parents who do not have English as a first language may not benefit as much as other parents from this intervention. Findings suggest this is a promising intervention for parents of a child with a disability that is likely to be less resource intensive to service providers than individually delivered interventions. Limitations and implications for future research are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Testing for Questionable Research Practices in a Meta-Analysis: An Example from Experimental Parapsychology.

Directory of Open Access Journals (Sweden)

Dick J Bierman

Full Text Available We describe a method of quantifying the effect of Questionable Research Practices (QRPs on the results of meta-analyses. As an example we simulated a meta-analysis of a controversial telepathy protocol to assess the extent to which these experimental results could be explained by QRPs. Our simulations used the same numbers of studies and trials as the original meta-analysis and the frequencies with which various QRPs were applied in the simulated experiments were based on surveys of experimental psychologists. Results of both the meta-analysis and simulations were characterized by 4 metrics, two describing the trial and mean experiment hit rates (HR of around 31%, where 25% is expected by chance, one the correlation between sample-size and hit-rate, and one the complete P-value distribution of the database. A genetic algorithm optimized the parameters describing the QRPs, and the fitness of the simulated meta-analysis was defined as the sum of the squares of Z-scores for the 4 metrics. Assuming no anomalous effect a good fit to the empirical meta-analysis was found only by using QRPs with unrealistic parameter-values. Restricting the parameter space to ranges observed in studies of QRP occurrence, under the untested assumption that parapsychologists use comparable QRPs, the fit to the published Ganzfeld meta-analysis with no anomalous effect was poor. We allowed for a real anomalous effect, be it unidentified QRPs or a paranormal effect, where the HR ranged from 25% (chance to 31%. With an anomalous HR of 27% the fitness became F = 1.8 (p = 0.47 where F = 0 is a perfect fit. We conclude that the very significant probability cited by the Ganzfeld meta-analysis is likely inflated by QRPs, though results are still significant (p = 0.003 with QRPs. Our study demonstrates that quantitative simulations of QRPs can assess their impact. Since meta-analyses in general might be polluted by QRPs, this method has wide applicability outside the domain of

Testing for Questionable Research Practices in a Meta-Analysis: An Example from Experimental Parapsychology.

Science.gov (United States)

Bierman, Dick J; Spottiswoode, James P; Bijl, Aron

2016-01-01

We describe a method of quantifying the effect of Questionable Research Practices (QRPs) on the results of meta-analyses. As an example we simulated a meta-analysis of a controversial telepathy protocol to assess the extent to which these experimental results could be explained by QRPs. Our simulations used the same numbers of studies and trials as the original meta-analysis and the frequencies with which various QRPs were applied in the simulated experiments were based on surveys of experimental psychologists. Results of both the meta-analysis and simulations were characterized by 4 metrics, two describing the trial and mean experiment hit rates (HR) of around 31%, where 25% is expected by chance, one the correlation between sample-size and hit-rate, and one the complete P-value distribution of the database. A genetic algorithm optimized the parameters describing the QRPs, and the fitness of the simulated meta-analysis was defined as the sum of the squares of Z-scores for the 4 metrics. Assuming no anomalous effect a good fit to the empirical meta-analysis was found only by using QRPs with unrealistic parameter-values. Restricting the parameter space to ranges observed in studies of QRP occurrence, under the untested assumption that parapsychologists use comparable QRPs, the fit to the published Ganzfeld meta-analysis with no anomalous effect was poor. We allowed for a real anomalous effect, be it unidentified QRPs or a paranormal effect, where the HR ranged from 25% (chance) to 31%. With an anomalous HR of 27% the fitness became F = 1.8 (p = 0.47 where F = 0 is a perfect fit). We conclude that the very significant probability cited by the Ganzfeld meta-analysis is likely inflated by QRPs, though results are still significant (p = 0.003) with QRPs. Our study demonstrates that quantitative simulations of QRPs can assess their impact. Since meta-analyses in general might be polluted by QRPs, this method has wide applicability outside the domain of experimental

Numerical and Experimental Analysis on Inorganic Phase Change Material Usage in Construction

Science.gov (United States)

Muthuvel, S.; Saravanasankar, S.; Sudhakarapandian, R.; Muthukannan, M.

2014-12-01

This work demonstrates the significance of Phase Change Material (PCM) in the construction of working sheds and product storage magazines in fireworks industries to maintain less temperature variation by passive cooling. The inorganic PCM, namely Calcium Chloride Hexahydrate (CCH) is selected in this study. First, the performance of two models with inbuilt CCH was analysed, using computational fluid dynamics. A significant change in the variation of inner wall temperature was observed, particularly during the working hours. This is mainly due to passive cooling, where the heat transfer from the surroundings to the room is partially used for the phase change from solid to liquid. The experiment was carried out by constructing two models, one with PCM packed in hollow brick walls and roof, and the other one as a conventional construction. The experimental results show that the temperature of the room got significantly reduced up to 7 °C. The experimental analysis results had good agreement with the numerical analysis results, and this reveals the advantage of the PCM in the fireworks industry construction.

A Comparative Analysis of Social Media Marketing by Transportation Network Companies in the Sharing Economy

OpenAIRE

Heymans, Alice

2017-01-01

The sharing economy is a new business model rapidly expanding. In transportation, many people use innovative services proposed by ride-hailing mobile applications. These technological platforms, operated by networking companies, rely extensively on social media to promote their services, and reach new customers (riders) and providers (drivers). This dissertation focuses on e-marketing communication. It makes a comparative analysis of the information published on several social media (Facebook...

Learning to Be Mobile

DEFF Research Database (Denmark)

McIlvenny, Paul

of this creative cyclomobility research focuses on adult cycling or more extreme sports, such as BMX trials or mountain biking. There is, however, little qualitative research to date on family bike rides, eg. how children learn to sit in or ride a bike and how parents or caregivers talk and interact with children...... predominantly on separate bike lanes, with bike-only traffic lights at intersections for example. The analysis will be illustrated with clips comprising multi-angle video recordings of the two types of bike rides. After several experiments, more than one video camera was necessary to capture audio and visual...... are presented and discussed: 1) riding/talk formations; 2) stretchy participation frameworks; 3) navigating static and moving obstacles; 4) situated noticings: 5) learning safe riding; and 6) negotiating the appropriate road conduct of other road users....

Experimental and Numerical Analysis of Screw Fixation in Anterior Cruciate Ligament Reconstruction

Science.gov (United States)

Chizari, Mahmoud; Wang, Bin; Snow, Martyn; Barrett, Mel

2008-09-01

This paper reports the results of an experimental and finite element analysis of tibial screw fixation in anterior cruciate ligament (ACL) reconstruction. The mechanical properties of the bone and tendon graft are obtained from experiments using porcine bone and bovine tendon. The results of the numerical study are compared with those from mechanical testing. Analysis shows that the model may be used to establish the optimum placement of the tunnel in anterior cruciate ligament reconstruction by predicting mechanical parameters such as stress, strain and displacement at regions in the tunnel wall.

Numerical and experimental analysis of a horizontal ground-coupled heat pump system

Energy Technology Data Exchange (ETDEWEB)

Esen, Hikmet; Esen, Mehmet [Department of Mechanical Education, Faculty of Technical Education, University of Firat, 23119 Elazig (Turkey); Inalli, Mustafa [Department of Mechanical Engineering, Faculty of Engineering, University of Firat, 23119 Elazig (Turkey)

2007-03-15

The main objective of this work is to evaluate a heat pump system using the ground as a source of heat. A ground-coupled heat pump (GCHP) system has been installed and tested at the test room, University of Firat, Elazig, Turkey. Results obtained during experimental testing are presented and discussed here. The coefficient of performance (COP{sub sys}) of the GCHP system is determined from the measured data. A numerical model of heat transfer in the ground was developed for determining the temperature distribution in the vicinity of the pipe. The finite difference approximation is used for numerical analysis. It is observed that the numerical results agree with the experimental results. (author) (author)

Control of maglev vehicles with aerodynamic and guideway disturbances

Science.gov (United States)

Flueckiger, Karl; Mark, Steve; Caswell, Ruth; Mccallum, Duncan

1994-01-01

A modeling, analysis, and control design methodology is presented for maglev vehicle ride quality performance improvement as measured by the Pepler Index. Ride quality enhancement is considered through active control of secondary suspension elements and active aerodynamic surfaces mounted on the train. To analyze and quantify the benefits of active control, the authors have developed a five degree-of-freedom lumped parameter model suitable for describing a large class of maglev vehicles, including both channel and box-beam guideway configurations. Elements of this modeling capability have been recently employed in studies sponsored by the U.S. Department of Transportation (DOT). A perturbation analysis about an operating point, defined by vehicle and average crosswind velocities, yields a suitable linearized state space model for multivariable control system analysis and synthesis. Neglecting passenger compartment noise, the ride quality as quantified by the Pepler Index is readily computed from the system states. A statistical analysis is performed by modeling the crosswind disturbances and guideway variations as filtered white noise, whereby the Pepler Index is established in closed form through the solution to a matrix Lyapunov equation. Data is presented which indicates the anticipated ride quality achieved through various closed-loop control arrangements.

Experimental Analysis of Desalination Unit Coupled with Solar Water Lens Concentrator

Science.gov (United States)

Chaithanya, K. K.; Rajesh, V. R.; Suresh, Rahul

2016-09-01

The main problem that the world faces in this scenario is shortage of potable water. Hence this research work rivets to increase the yield of desalination system in an economical way. The integration of solar concentrator and desalination unit can project the desired yield, but the commercially available concentrated solar power technologies (CSP) are not economically viable. So this study proposes a novel method to concentrate ample amount of solar radiation in a cost effective way. Water acting as lens is a highlighted technology initiated in this work, which can be a substitute for CSP systems. And water lens can accelerate the desalination process so as to increase the yield economically. The solar irradiance passing through the water will be concentrated at a focal point, and the concentration depends on curvature of water lens. The experimental analysis of water lens makes use of transparent thin sheet, supported on a metallic structure. The Plano convex shape of water lens is developed by varying the volume of water that is being poured on the transparent thin sheet. From the experimental analysis it is inferred that, as the curvature of water lens increases, solar irradiance can be focused more accurately on to the focus and a higher water temperature is obtained inside the solar still.

R&D productivity rides again?

Science.gov (United States)

Lendrem, Dennis; Senn, Stephen J; Lendrem, B Clare; Isaacs, John D

2015-01-01

A recent analysis of R&D productivity suggests that there are grounds for 'cautious optimism' that the industry 'turned the corner' in 2008 and is 'on the comeback trail'. We believe that this analysis is flawed and most probably wrong. We present an alternative analysis of these same data to suggest that the industry is not yet 'out of the woods' and suggest that many of the systemic issues affecting pharmaceutical R&D productivity are still being resolved. Copyright © 2014 John Wiley & Sons, Ltd.

Comparison of typical inelastic analysis predictions with benchmark problem experimental results

International Nuclear Information System (INIS)

Clinard, J.A.; Corum, J.M.; Sartory, W.K.

1975-01-01

The results of exemplary inelastic analyses for experimental benchmark problems on reactor components are presented. Consistent analytical procedures and constitutive relations were used in each of the analyses, and the material behavior data presented in the Appendix were used in all cases. Two finite-element inelastic computer programs were employed. These programs implement the analysis procedures and constitutive equations for type 304 stainless steel that are currently used in many analyses of elevated-temperature nuclear reactor system components. The analysis procedures and constitutive relations are briefly discussed, and representative analytical results are presented and compared to the test data. The results that are presented demonstrate the feasibility of performing inelastic analyses for the types of problems discussed, and they are indicative of the general level of agreement that the analyst might expect when using conventional inelastic analysis procedures. (U.S.)

Linear elastic obstacles: analysis of experimental results in the case of stress dependent pre-exponentials

International Nuclear Information System (INIS)

Surek, T.; Kuon, L.G.; Luton, M.J.; Jones, J.J.

1975-01-01

For the case of linear elastic obstacles, the analysis of experimental plastic flow data is shown to have a particularly simple form when the pre-exponential factor is a single-valued function of the modulus-reduced stress. The analysis permits the separation of the stress and temperature dependence of the strain rate into those of the pre-exponential factor and the activation free energy. As a consequence, the true values of the activation enthalpy, volume and entropy also are obtained. The approach is applied to four sets of experimental data, including Zr, and the results for the pre-exponential term are examined for self-consistency in view of the assumed functional dependence

Characteristics of a micro-fin evaporator: Theoretical analysis and experimental verification

OpenAIRE

Zheng Hui-Fan; Fan Xiao-Wei; Wang Fang; Liang Yao-Hua

2013-01-01

A theoretical analysis and experimental verification on the characteristics of a micro-fin evaporator using R290 and R717 as refrigerants were carried out. The heat capacity and heat transfer coefficient of the micro-fin evaporator were investigated under different water mass flow rate, different refrigerant mass flow rate, and different inner tube diameter of micro-fin evaporator. The simulation results of the heat transfer coefficient are fairly in good a...

Experimental Evaluation of Grid Support Enabled PV Inverter Response to Abnormal Grid Conditions: Preprint

Energy Technology Data Exchange (ETDEWEB)

Nelson, Austin; Martin, Gregory; Hurtt, James

2017-05-08

As revised interconnection standards for grid-tied photovoltaic (PV) inverters address new advanced grid support functions (GSFs), there is increasing interest in inverter performance in the case of abnormal grid conditions. The growth of GSF-enabled inverters has outpaced the industry standards that define their operation, although recently published updates to UL1741 with Supplement SA define test conditions for GSFs such as volt-var control, frequency-watt control, and volt-age/frequency ride-through, among others. A comparative experimental evaluation has been completed on four commercially available, three-phase PV inverters in the 24.0-39.8 kVA power range on their GSF capability and the effect on abnormal grid condition response. This study examines the impact particular GSF implementations have on run-on times during islanding conditions, peak voltages in load rejection overvoltage scenarios, and peak currents during single-phase and three-phase fault events for individual inverters. This report reviews comparative test data, which shows that GSFs have little impact on the metrics of interest in most tests cases.

Droop-Controlled Inverters with Seamless Transition between Islanding and Grid-Connected Operations

DEFF Research Database (Denmark)

Hu, Shang-Hung; Kuo, Chun-Yi; Lee, Tzung-Lin

2011-01-01

This paper presents a seamless transition method for droop-controlled inverters to operate in both islanding and grid-connected modes. A local PLL and a virtual inductance are designed to ride through transient when the inverter switches between two modes with no synchronization. The proposed...... method can cooperatively work with well-developed droop controls so that the inverters are able to share load among them as well as subsist under transient events of the utility. Theoretical analysis and experimental results validate effectiveness of the proposed method....

Chemical analysis of interstitial water in rivers of Centro Experimental Aramar area

International Nuclear Information System (INIS)

Matoso, Erika; Goncalves, Julia Rosa; Cadore, Solange

2013-01-01

This work presents the results from analysis of samples of interstitial waters for the following chemical parameters: F - , Cl - , NO 2 - , Br - , NO 3 - , PO 4 3- , SO 4 2- by Ionic Chromatography, Na, K by Flame Photometry, Al, Cd, Pb, Cu, Cr, Fe, Mn, Ni, Zn by ICP OES, pH and the biological parameter: toxicity by natural bioluminescent bacterium (Vibrio fischeri) bioassay. The samples were obtained from sediments collected in 6 different sampling locations, in a ratio of 10-km-long from Centro Experimental Aramar (CEA). The rivers were the samples came from were: Ipanema River, Sorocaba River and Ribeirao do Ferro River. The interstitial water was extracted by centrifugation (3000 rpm, 20 min, 4 deg C). Analysis for metal concentrations were carried out after acid digestion and others tests proceeded in the sample after filtration without further treatment. These data will contribute to evaluate the distribution of contaminants and nutrients in these collecting points and this toxicity status. The release of soluble substances from sediments to interstitial water provides one way for bioaccumulation of these compounds and may affect the survival or development of aquatic organisms. The analysis in interstitial water has never been evaluated at this sampling points and the importance of this study is collecting data providing a better knowledge of the hydrological conditions in which Centro Experimental Aramar is located. (author)

Rotor Current Control of DFIG for Improving Fault Ride - Through Using a Novel Sliding Mode Control Approach

Science.gov (United States)

Cai, Guowei; Liu, Cheng; Yang, Deyou

2013-11-01

The doubly fed induction generators (DFIG) have been recognized as the dominant technology used in wind power generation systems with the rapid development of wind power. However, continuous operation of DFIG may cause a serious wind turbine generators tripping accident, due to destructive over-current in the rotor winding which is caused by the power system fault or inefficient fault ride-through (FRT) strategy. A new rotor current control scheme in the rotor-side converter (RSC) ispresented to enhance FRT capacities of grid-connected DFIG. Due to the strongly nonlinear nature of DFIG and insensitive to DFIG parameter's variations, a novel sliding mode controller was designed. The controller combines extended state observer (ESO) with sliding model variable structure control theory. The simulation is carried out to verify the effectiveness of the proposed control approach under various types of grid disturbances. It is shown that the proposed controller provides enhanced transient features than the classic proportional-integral control. The proposed control method can effectively reduce over-current in the RSC, and the transient pulse value of electromagnetic torque is too large under power grid fault.

Studies on High Voltage Ride through Technologies in Wind Turbines%风力发电机组高电压穿越技术研究

Institute of Scientific and Technical Information of China (English)

马伟娜; 姚万业; 白恺

2014-01-01

为保障风电大规模接入条件下电力系统的高效稳定运行，电网电压骤升对风力发电机组的影响分析及相应高电压穿越技术的研究逐步成为国内外研究热点。通过分析风力发电机组大规模脱网事件对高电压穿越概念进行理解，结合现行国内外高电压穿越标准及电压骤升下风机的暂态过程，介绍了实现电压穿越的不同技术方案，为风力发电机组高电压穿越技术的研究和应用提供参考。%For the efficient and stable operation of the power system integrated with large scale of wind power,the response of the wind turbine generation system to the voltage swells of the power grid and technical principles of HVRT have gradually become a focus of studies at home and abroad. This paper introduces and interprets the high voltage ride-through(HVRT) concept by analyzing the large-scaled off-grid event, and presents different technical principles based on the current domestic and foreign HVRT standards and the transient process of the wind turbine under the voltage swell. The paper can provide useful reference for the research and application of the high voltage ride through technology for the wind turbine.

Experimental analysis of armouring process

Science.gov (United States)

Lamberti, Alberto; Paris, Ennio

Preliminary results from an experimental investigation on armouring processes are presented. Particularly, the process of development and formation of the armour layer under different steady flow conditions has been analyzed in terms of grain size variations and sediment transport rate associated to each size fraction.

Experimental and computational analysis of the hot water layer for the radiological protection in swimming pool reactor

International Nuclear Information System (INIS)

Ribeiro, Rogerio.

1995-01-01

Pool reactors are research reactors, which allow easy access to the core and rare simple to operate. Reactors of this kind operating at power levels higher than about one megawatt need a hot water layer at the surface of the pool, in order to keep surface activity below acceptable levels and enable free access to the upper part of the reactor. An experimental apparatus was constructed to study the hot water layer stability. Thermocouples were used to measure the temperature field. A numerical analysis was conducted simultaneously. Regarding experimental results, representative temperature contour lines of the hot water layer were plotted. The temperature field was determined in the numerical analysis and temperature contour lines corresponding to those of the experimental results were plotted. The hot water layer kept stable for experimental and numerical results. Good agreement between the results for the hot water layer position and thickness has been obtained. (author). 21 refs., 40 figs., 15 tabs

Removal of Cr(III ions from salt solution by nanofiltration: experimental and modelling analysis

Directory of Open Access Journals (Sweden)

Kowalik-Klimczak Anna

2016-09-01

Full Text Available The aim of this study was experimental and modelling analysis of the nanofiltration process used for the removal of chromium(III ions from salt solution characterized by low pH. The experimental results were interpreted with Donnan and Steric Partitioning Pore (DSP model based on the extended Nernst-Planck equation. In this model, one of the main parameters, describing retention of ions by the membrane, is pore dielectric constant. In this work, it was identified for various process pressures and feed compositions. The obtained results showed the satisfactory agreement between the experimental and modelling data. It means that the DSP model may be helpful for the monitoring of nanofiltration process applied for treatment of chromium tannery wastewater.

Stability and spring constant investigation for micromachined inductive suspensions: theoretical analysis vs. experimental results

International Nuclear Information System (INIS)

Poletkin, K; Lu, Z; Wallrabe, U; Badilita, V; Den Hartogh, B

2014-01-01

We present a linear analytical model coupled with experimental analysis to discuss stability of a levitated proof mass (PM) in a micromachined inductive suspension (MIS), which has been previously introduced and characterized. The model is a function of the MIS geometry, describes the dynamics of a levitated disk-shaped PM near the equilibrium point, and predicts conditions for stable levitation. The experimental setup directly measures the lateral component of the Lorentz force, which has a stabilization role in the MIS structure, as well as the vertical levitation force. The experimental setup is further used to derive mechanical parameters such as stiffness values relative to lateral, vertical and angular displacements, proven to be in excellent agreement with the values predicted by the analytical model

Riding the wave or paddling in the shallows? Understanding older Australians' use of the internet.

Science.gov (United States)

Burns, Pippa; Jones, Sandra C; Iverson, Don; Caputi, Peter

2012-08-01

Australia's ageing population is set to become an increasing burden on an already over-stretched primary health care system. Potential strategies to alleviate this pressure need to be investigated. Increased knowledge of older Australians' use of the internet would allow the appropriateness of online health intervention to be assessed. This initial, exploratory study examined the proportion of people aged 55 years and older who accessed the internet. It investigated their duration of use, level of comfort, use of the internet to seek health information and perceived reliability of information found on the internet. A paper based survey was distributed to a purposive sample of adults in metropolitan New South Wales. Complete data was received from 115 respondents. Sixty-two per cent of respondents reported internet use, with use decreasing with age. The majority of respondents who used the internet reported high confidence levels and long-term use. The majority had used the internet to search for health information which was generally perceived to be reliable. Logistic regression showed tertiary education and household income greater than $40,000 per year predicted use of a computer to access the internet. The majority of older Australians surveyed were successfully riding the internet wave. They have both the skills and equipment to access health information online and many were already doing so.

Proportional-Resonant Control of Doubly-Fed Induction Generator Wind Turbines for Low-Voltage Ride-Through Enhancement

Directory of Open Access Journals (Sweden)

Zhan-Feng Song

2012-11-01

Full Text Available A novel control strategy is proposed in this paper for the rotor side converter (RSC of doubly-fed induction generator (DFIG-based wind power generation systems. It is supposed to enhance the low-voltage ride-through (LVRT capability of DFIGs during great-level grid voltage dips. The strategy consists of a proportional-resonant (PR controller and auxiliary PR controllers. The auxiliary controllers compensate the output voltage of the RSC in case of grid faults, thus limiting the rotor inrush current of DFIG and meeting the requirements of LVRT. Sequential-component decompositions of current are not required in the control system to improve the response of system. Since the resonant compensator is a double-side integrator, the auxiliary controllers can be simplified through coordinate transformation. The feasibility of the control strategy is validated by simulation on a 1.5 MW wind-turbine driven DFIG system. The impact of the RSC converter voltage rating on the LVRT capability of DFIG is investigated. Meanwhile, the influence of angular frequency detection and control parameters are also discussed. Compared with traditional vector control schemes based on PI current controllers, the presented control strategy effectively suppress rotor current and reduce oscillations of DFIG power and torque under grid faults.

Head and pelvic movement asymmetries at trot in riding horses in training and perceived as free from lameness by the owner

Science.gov (United States)

Egenvall, Agneta; Haubro Andersen, Pia; Pfau, Thilo

2017-01-01

Recent studies evaluating horses in training and considered free from lameness by their owners have identified a large proportion of horses with motion asymmetries. However the prevalence, type and magnitude of asymmetries when trotting in a straight line or on the lunge have not been investigated. The aim of this study was to objectively investigate the presence of motion asymmetries in riding horses in training by identifying the side and quantifying the degree and type (impact, pushoff) of forelimb and hind limb asymmetries found during straight line trot and on the lunge. In a cross-sectional study, vertical head and pelvic movement symmetry was measured in 222 Warmblood type riding horses, all without perceived performance issues and considered free from lameness by their owners. Body-mounted uni-axial accelerometers were used and differences between maximum and minimum head (HDmax, HDmin) and pelvic (PDmax, PDmin) vertical displacement between left and right forelimb and hind limb stances were calculated during straight line trot and on the lunge. Previously reported symmetry thresholds were used. The thresholds for symmetry were exceeded in 161 horses for at least one variable while trotting in a straight line, HDmin (n = 58, mean 14.3 mm, SD 7.1), HDmax (n = 41, mean 12.7 mm, SD 5.5), PDmax (n = 87, mean 6.5 mm, SD 3.10), PDmin (n = 79, mean 5.7 mm, SD 2.1). Contralateral and ipsilateral concurrent forelimb and hind limb asymmetries were detected in 41 and 49 horses, respectively. There was a linear association between the straight line PDmin values and the values on the lunge with the lame limb to the inside of the circle. A large proportion (72.5%) of horses in training which were perceived as free from lameness by their owner showed movement asymmetries above previously reported asymmetry thresholds during straight line trot. It is not known to what extent these asymmetries are related to pain or to mechanical abnormalities. Therefore, one of the most

Research Directions for Cyber Experimentation: Workshop Discussion Analysis.

Energy Technology Data Exchange (ETDEWEB)

DeWaard, Elizabeth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Deccio, Casey [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fritz, David Jakob [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tarman, Thomas D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

Sandia National Laboratories hosted a workshop on August 11, 2017 entitled "Research Directions for Cyber Experimentation," which focused on identifying and addressing research gaps within the field of cyber experimentation , particularly emulation testbeds . This report mainly documents the discussion toward the end of the workshop, which included research gaps such as developing a sustainable research infrastructure, exp anding cyber experimentation, and making the field more accessible to subject matter experts who may not have a background in computer science . Other gaps include methodologies for rigorous experimentation, validation, and uncertainty quantification, which , if addressed, also have the potential to bridge the gap between cyber experimentation and cyber engineering. Workshop attendees presented various ways to overcome these research gaps, however the main conclusion for overcoming these gaps is better commun ication through increased workshops, conferences, email lists, and slack chann els, among other opportunities.

Therapeutic Horseback Riding Crossover Effects of Attachment Behaviors with Family Pets in a Sample of Children with Autism Spectrum Disorder

Directory of Open Access Journals (Sweden)

Jessie D. Petty

2017-03-01

Full Text Available The unique needs of individuals with autism spectrum disorder (ASD have implications for animal welfare. This nested pilot study examined the effects of a randomized trial of 10-week therapeutic horseback riding (THR intervention versus a no-horse barn activity (BA control group on children’s behaviors with family pets. Sixty-seven (THR n = 31; BA n = 36 participants with ASD (ages 6–16 years with one or more family pet, were enrolled from a larger trial (n = 116 following their randomization to intervention groups, stratified by nonverbal intellectual ability. A consistent caregiver completed questionnaires about participants’ interactions with their household pets pre- and post-intervention. Caregivers of THR group participants reported significant improvements in participants’ caring actions with the family pet compared with the BA group (p = 0.013; effect size = 0.74. Engaging with horses during a standard THR intervention protocol may generalize to improving caring actions toward family pets in children and adolescents with ASD.

Desiccant wheels for air humidification: An experimental and numerical analysis

International Nuclear Information System (INIS)

De Antonellis, Stefano; Intini, Manuel; Joppolo, Cesare Maria; Molinaroli, Luca; Romano, Francesco

2015-01-01

Highlights: • The use of desiccant wheel to humidify an air stream is investigated. • Air humidification is obtained by extracting water vapour from outdoor air. • Experimental tests in winter humidification conditions are performed. • The design of the proposed humidification system is numerically analyzed. • Effects of boundary conditions on humidification capacity are investigated. - Abstract: In this work the use of a desiccant wheel for air humidification is investigated through a numerical and experimental approach. In the proposed humidification system, water vapour is adsorbed from outdoor environment and it is released directly to the air stream supplied to the building. Such a system can be an interesting alternative to steam humidifiers in hospitals or, more generally, in applications where air contamination is a critical issue and therefore adiabatic humidifiers are not allowed. Performance of the proposed system is deeply investigated and optimal values of desiccant wheel configuration parameters are discussed. It is shown that in the investigated conditions, which are representative of Southern Europe winter climate, the system can properly match the latent load of the building. Finally, power consumption referred to the primary source of the proposed humidification system is compared to the one of steam humidifiers. The present analysis is carried out through experimental tests of a desiccant wheel in winter humidification conditions and through a phenomenological model of the device, based on heat and mass transfer equations.

Exergo-Economic Analysis of an Experimental Aircraft Turboprop Engine Under Low Torque Condition

Science.gov (United States)

Atilgan, Ramazan; Turan, Onder; Aydin, Hakan

Exergo-economic analysis is an unique combination of exergy analysis and cost analysis conducted at the component level. In exergo-economic analysis, cost of each exergy stream is determined. Inlet and outlet exergy streams of the each component are associated to a monetary cost. This is essential to detect cost-ineffective processes and identify technical options which could improve the cost effectiveness of the overall energy system. In this study, exergo-economic analysis is applied to an aircraft turboprop engine. Analysis is based on experimental values at low torque condition (240 N m). Main components of investigated turboprop engine are the compressor, the combustor, the gas generator turbine, the free power turbine and the exhaust. Cost balance equations have been formed for all components individually and exergo-economic parameters including cost rates and unit exergy costs have been calculated for each component.

Experimental and computational analysis of pressure response in a multiphase flow loop

Science.gov (United States)

Morshed, Munzarin; Amin, Al; Rahman, Mohammad Azizur; Imtiaz, Syed

2016-07-01

The characteristics of multiphase fluid flow in pipes are useful to understand fluid mechanics encountered in the oil and gas industries. In the present day oil and gas exploration is successively inducing subsea operation in the deep sea and arctic condition. During the transport of petroleum products, understanding the fluid dynamics inside the pipe network is important for flow assurance. In this case the information regarding static and dynamic pressure response, pressure loss, optimum flow rate, pipe diameter etc. are the important parameter for flow assurance. The principal aim of this research is to represents computational analysis and experimental analysis of multi-phase (L/G) in a pipe network. This computational study considers a two-phase fluid flow through a horizontal flow loop with at different Reynolds number in order to determine the pressure distribution, frictional pressure loss profiles by volume of fluid (VOF) method. However, numerical simulations are validated with the experimental data. The experiment is conducted in 76.20 mm ID transparent circular pipe using water and air in the flow loop. Static pressure transducers are used to measure local pressure response in multiphase pipeline.

Evaluation of thermal ratchetting on axisymmetric thin shells at the free level of sodium: Experimental results and elastic analysis

International Nuclear Information System (INIS)

Cabrillat, M.T.; Gatt, J.M.; Schoulguine, P.; Skiara, A.

1993-01-01

Startup operations and load variations for a FBR reactor (Fast Breeder Reactor) cause sodium level variations in the vessels which exert stresses on the emergent shells in the free level area. The loading of these shells is mainly linked to the axial thermal gradient, primary stresses being generally low or negligible as are the radial thermal gradients. Under the effect of these variable axial thermal gradients, there is a risk of progressive deformation even in the absence of primary type stresses. The simplified methods of analysis (Bree diagram, efficiency diagram) proposed in the design codes (Code Case and RCCMR) are not applicable in this specific case where primary type stresses are negligible. In recent years, many studies and experimental programmes have been undertaken in order to propose more reliable methods of analysis for these structures. This paper describes the experimental program, called VINIL, developed at the CEA at Cadarache. After a brief description of the experimental facility and of the experimental results, this paper proposes an evaluation of the risk of progressive deformation on an elastic basis: various simplified methods of analysis were used and are compared with experimental results

Experimental And Theoretical Stress Analysis For Composite Plate Under Combined Load

Directory of Open Access Journals (Sweden)

Emad Qasim Hussein

2017-12-01

Full Text Available The combined effects of thermal and mechanical loadings on the distribution of stress-strain for E-glass fiber /polyester composite plates are investigated experimentally and numerically. The experimental work has been carried out by applying to a uniform temperature and tensile load on the composite plate inside the furnace and the deformation of plate measured by a dial gauge. Two parameter studies, the fiber volume fraction and fiber orientation on the stress-strain for plates subjected to identical mechanical and temperature gradient. The results presented showed that, the maximum absolute of total strain in longitudinal direction occurred at 50 N tension load and fiber angle 60º, while the minimum absolute values of it occurred at 15 N tension loads and fiber angle 0º. However the maximum absolute of total strain in transverse direction occurred at 15N tension load and fiber angle 0º, while the minimum absolute values of it are obtained at 50 N tension loads and fiber angle 60º. Also, the total strain in longitudinal and transverse direction decrease with increasing the fiber volume fraction. Comparison of the results in the experimental test with the numerical analysis of the total strain and evaluated the agreement between the two methods used, the maximum discrepancywas 20%.

Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation

Directory of Open Access Journals (Sweden)

Hasan Mahamudul

2016-01-01

Full Text Available This work represents an effective design of a temperature regulated PV module by integrating phase change materials for Malaysian weather condition. Through the numerical analysis and experimental investigation it has been shown that if a PCM layer of width 0.02 m of RT 35 is used as a cooling arrangement with a PV module, the surface temperature of the module is reduced by 10°C, which remains constant for a period of 4–6 hours. This reduction of temperature implies the increase in conversion efficiency of the module. Experiment as well as investigation has been carried out considering typical Malaysian weather. Obtained result has been validated by using experimental prototype and comparative analysis.

Articles Published in Four School Psychology Journals from 2000 to 2005: An Analysis of Experimental/Intervention Research

Science.gov (United States)

Bliss, Stacy L.; Skinner, Christopher H.; Hautau, Briana; Carroll, Erin E.

2008-01-01

Using an experimenter-developed system, articles from four school psychology journals for the years 2000-2005 (n = 929) were classified. Results showed that 40% of the articles were narrative, 29% correlational, 16% descriptive, 8% causal-experimental, 4% causal-comparative, and 2% were meta-analytic. Further analysis of the causal-experimental…

Acoustic analysis in Mudejar-Gothic churches: experimental results.

Science.gov (United States)

Galindo, Miguel; Zamarreño, Teófilo; Girón, Sara

2005-05-01

This paper describes the preliminary results of research work in acoustics, conducted in a set of 12 Mudejar-Gothic churches in the city of Seville in the south of Spain. Despite common architectural style, the churches feature individual characteristics and have volumes ranging from 3947 to 10 708 m3. Acoustic parameters were measured in unoccupied churches according to the ISO-3382 standard. An extensive experimental study was carried out using impulse response analysis through a maximum length sequence measurement system in each church. It covered aspects such as reverberation (reverberation times, early decay times), distribution of sound levels (sound strength); early to late sound energy parameters derived from the impulse responses (center time, clarity for speech, clarity, definition, lateral energy fraction), and speech intelligibility (rapid speech transmission index), which all take both spectral and spatial distribution into account. Background noise was also measured to obtain the NR indices. The study describes the acoustic field inside each temple and establishes a discussion for each one of the acoustic descriptors mentioned by using the theoretical models available and the principles of architectural acoustics. Analysis of the quality of the spaces for music and speech is carried out according to the most widespread criteria for auditoria.

Acoustic analysis in Mudejar-Gothic churches: Experimental results

Science.gov (United States)

Galindo, Miguel; Zamarreño, Teófilo; Girón, Sara

2005-05-01

This paper describes the preliminary results of research work in acoustics, conducted in a set of 12 Mudejar-Gothic churches in the city of Seville in the south of Spain. Despite common architectural style, the churches feature individual characteristics and have volumes ranging from 3947 to 10 708 m3. Acoustic parameters were measured in unoccupied churches according to the ISO-3382 standard. An extensive experimental study was carried out using impulse response analysis through a maximum length sequence measurement system in each church. It covered aspects such as reverberation (reverberation times, early decay times), distribution of sound levels (sound strength); early to late sound energy parameters derived from the impulse responses (center time, clarity for speech, clarity, definition, lateral energy fraction), and speech intelligibility (rapid speech transmission index), which all take both spectral and spatial distribution into account. Background noise was also measured to obtain the NR indices. The study describes the acoustic field inside each temple and establishes a discussion for each one of the acoustic descriptors mentioned by using the theoretical models available and the principles of architectural acoustics. Analysis of the quality of the spaces for music and speech is carried out according to the most widespread criteria for auditoria. .

Experimental Analysis of a Heat Cost Allocation Method for Apartment Buildings

Directory of Open Access Journals (Sweden)

Fabio Saba

2017-03-01

Full Text Available The correct estimate of individual thermal energy consumptions, and consequently, a fair heat cost allocation among the residents of apartment buildings with centralized heating systems, represents an important driving force towards energy saving, energy efficiency and the reduction of pollutant emissions. Nowadays, in those contexts where direct heat meters cannot be used because of the layout of the hot water distribution system, electronic Heat Cost Allocators (HCAs have the highest market share for the assessment of individual thermal energy consumptions. The uncertainty associated with the parameterization of heat cost allocation devices and the installation effects arising in real applications can negatively affect the accuracy of these devices, as far as the estimation of the individual fractions of thermal energy consumption is concerned. This work deals with the experimental analysis of a novel heat cost allocation method for apartment buildings and its comparison with conventional HCAs. The method allows the indirect estimation of the thermal energy exchanged by water radiators without the need for surface temperature measurements, reducing some of the drawbacks associated with the on-site installation. The experimental analysis was carried out in a full-scale central heating system test facility available at the Italian National Metrology Institute (INRIM and characterized by SI-traceable direct heat meters installed on each water radiator.

Cooperative Experimental System Development - cooperative techniques beyound initial design and analysis

DEFF Research Database (Denmark)

Grønbæk, Kaj; Kyng, Morten; Mogensen, Preben Holst

1995-01-01

This chapter represents a step towards the establishment of a new system development approach, called Cooperative Experimental System Development (CESD). CESD seeks to overcome a number of limitations in existing approaches: specification oriented methods usually assume that system design can....../design activities of development projects. In contrast, the CESD approach is characterized by its focus on: active user involvement throughout the entire development process; prototyping experiments closely coupled to work-situations and use-scenarios; transforming results from early cooperative analysis...... be based solely on observation and detached reflection; prototyping methods often have a narrow focus on the technical construction of various kinds of prototypes; Participatory Design techniques—including the Scandinavian Cooperative Design (CD) approaches—seldom go beyond the early analysis...

Digital evaluation of sitting posture comfort in human-vehicle system under Industry 4.0 framework

Science.gov (United States)

Tao, Qing; Kang, Jinsheng; Sun, Wenlei; Li, Zhaobo; Huo, Xiao

2016-09-01

Most of the previous studies on the vibration ride comfort of the human-vehicle system were focused only on one or two aspects of the investigation. A hybrid approach which integrates all kinds of investigation methods in real environment and virtual environment is described. The real experimental environment includes the WBV(whole body vibration) test, questionnaires for human subjective sensation and motion capture. The virtual experimental environment includes the theoretical calculation on simplified 5-DOF human body vibration model, the vibration simulation and analysis within ADAMS/VibrationTM module, and the digital human biomechanics and occupational health analysis in Jack software. While the real experimental environment provides realistic and accurate test results, it also serves as core and validation for the virtual experimental environment. The virtual experimental environment takes full advantages of current available vibration simulation and digital human modelling software, and makes it possible to evaluate the sitting posture comfort in a human-vehicle system with various human anthropometric parameters. How this digital evaluation system for car seat comfort design is fitted in the Industry 4.0 framework is also proposed.

Analysis and discussion on the experimental data of electrolyte analyzer

Science.gov (United States)

Dong, XinYu; Jiang, JunJie; Liu, MengJun; Li, Weiwei

2018-06-01

In the subsequent verification of electrolyte analyzer, we found that the instrument can achieve good repeatability and stability in repeated measurements with a short period of time, in line with the requirements of verification regulation of linear error and cross contamination rate, but the phenomenon of large indication error is very common, the measurement results of different manufacturers have great difference, in order to find and solve this problem, help enterprises to improve quality of product, to obtain accurate and reliable measurement data, we conducted the experimental evaluation of electrolyte analyzer, and the data were analyzed by statistical analysis.

EXPERIMENTAL MEASUREMENT, ANALYSIS AND MODELLING ...

African Journals Online (AJOL)

30 juin 2010 ... We obtain a good agreement between the resolution of the nonlinear equation of heat and the results obtained by the experimentation. . Keywords: Emissivity, Température, optimal Linearisation, finite elements. 1. ..... basse température, Rapport de Stage de D.E.A, Université Paris 12 – Val de Marne.

Experimental analysis with numerical comparison for different thermoelectric generators configurations

International Nuclear Information System (INIS)

Favarel, Camille; Bédécarrats, Jean-Pierre; Kousksou, Tarik; Champier, Daniel

2016-01-01

Highlights: • 3 experimental TE generators are tested and compared to a numerical model. • Different mass flow rates and temperatures ranges were used. • Maximum output electrical power is guaranty by the use of MPPT DC/DC controllers. • The importance of the occupancy rate for the design of TEG is demonstrated. • The importance of the location of the TE modules is shown. - Abstract: Thermoelectric (TE) energy harvesting is a promising perspective to use waste heat. Due to the low efficiency of thermoelectric materials many analytical and numerical optimization studies have been developed. To be validated, an optimization must necessarily be linked to the experience. There are a lot of results on thermoelectric generators (TEG) based on experiments or model validations. Nevertheless, the validated models concern most of the time one TE module but rarely an entire system. Moreover, these models of complete system mainly concern the optimization of fluid flow rates or of heat exchangers. Our choice is to optimize the number of these modules in a whole system point of view. A numerical model using a software for numerical computation, based on multi-physics equations such as heat transfer, fluid mechanics and thermoelectricity was developed to predict both thermal and electrical powers of TEG. This paper aims to present the experimental validation of this model and shows interesting experimental results on the location of the TE modules. In parallel, an experimental set-up was built to compare and validate this model. This set-up is composed of a thermal loop with a hot gas source, a cold fluid, a hot fin exchanger, a cold tubular exchanger and thermoelectric modules. The number and the place of these modules can be changed to study different configurations. A specific maximum power point tracker DC/DC converter charging a battery is added in order to study the electrical power produced by the TEG. The analysis of the influence of the number of

Chemical analysis of interstitial water in rivers of Centro Experimental Aramar area

Energy Technology Data Exchange (ETDEWEB)

Matoso, Erika; Goncalves, Julia Rosa, E-mail: ematoso@hotmail.com [Centro Tecnologico da Marinha (CE/CTM-SP), Ipero, SP (Brazil). Centro Experimental Aramar; Cadore, Solange [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Instituto de Quimica. Departamento de Quimica Analitica

2013-07-01

This work presents the results from analysis of samples of interstitial waters for the following chemical parameters: F{sup -}, Cl{sup -}, NO{sub 2}{sup -}, Br{sup -}, NO{sub 3}{sup -}, PO{sub 4}{sup 3-}, SO{sub 4}{sup 2-} by Ionic Chromatography, Na, K by Flame Photometry, Al, Cd, Pb, Cu, Cr, Fe, Mn, Ni, Zn by ICP OES, pH and the biological parameter: toxicity by natural bioluminescent bacterium (Vibrio fischeri) bioassay. The samples were obtained from sediments collected in 6 different sampling locations, in a ratio of 10-km-long from Centro Experimental Aramar (CEA). The rivers were the samples came from were: Ipanema River, Sorocaba River and Ribeirao do Ferro River. The interstitial water was extracted by centrifugation (3000 rpm, 20 min, 4 deg C). Analysis for metal concentrations were carried out after acid digestion and others tests proceeded in the sample after filtration without further treatment. These data will contribute to evaluate the distribution of contaminants and nutrients in these collecting points and this toxicity status. The release of soluble substances from sediments to interstitial water provides one way for bioaccumulation of these compounds and may affect the survival or development of aquatic organisms. The analysis in interstitial water has never been evaluated at this sampling points and the importance of this study is collecting data providing a better knowledge of the hydrological conditions in which Centro Experimental Aramar is located. (author)

Influence of the cognitive workload on bicycle safety at four-legged intersections

DEFF Research Database (Denmark)

Kveladze, Irma; Agerholm, Niels

2018-01-01

is the influence of workload capacity on bicyclists spatial behaviour in a natural environment of four-legged intersections. Method: Due to the traffic safety of test participants, the study is divided in two phases. In the first phase, the actual physical environment of the four-legged intersection and bicyclists......-legged intersection. The eye tracking glasses will be used to make video and audio recording of visible field of where or how long bicyclists are allocating their visual attention while riding a bicycle and facing obstacles when crossing the four-legged intersection. On the second phase, a bicycle riding simulator...... riding task. This will allow to understand the allocation of bicyclists attention between primary and secondary tasks, to reveal the limit of the information processing capacity during biking. Results expected: Two experimental results will be incorporated to gain in-depth knowledge on bicycle accidents...

Jones matrix formulation of a Porro prism laser resonator with waveplates: theoretical and experimental analysis

Science.gov (United States)

Agrawal, L.; Bhardwaj, A.; Pal, S.; Kumar, A.

2007-11-01

This article presents the results of a detailed theoretical and experimental analysis carried out on a folded Z-shaped polarization coupled, electro-optically Q-switched laser resonator with Porro prisms and waveplates. The advantages of adding waveplates in a Porro prism resonator have been explored for creating high loss condition prior to Q-switching and obtaining variable reflectivity with fixed orientation of Porro prism. Generalized expressions have been derived in terms of azimuth angles and phase shifts introduced by the polarizing elements. These expressions corroborate with known reported results under appropriate substitutions. A specific case of a crossed Porro prism diode-pumped Nd:YAG laser has been theoretically and experimentally investigated. In the feedback arm, a 0.57λ waveplate oriented at 135° completely compensates the phase shift of a fused silica Porro prism and provides better tolerances than a BK-7 prism/0.60λ waveplate combination to stop prelasing. The fused silica prism/0.57λ combination with waveplate at 112° acts like a 100% mirror and was utilized for optimization of free running performance. The effective reflectivity was determined for various orientations of the quarter waveplate in the gain arm to numerically estimate the Q-switched laser pulse parameters through rate equation analysis. Experimental results match well with the theoretical analysis.

Experimental design for optimizing MALDI-TOF-MS analysis of palladium complexes

Directory of Open Access Journals (Sweden)

Rakić-Kostić Tijana M.

2017-01-01

Full Text Available This paper presents optimization of matrix-assisted laser desorption/ionization (MALDI time-of-flight (TOF mass spectrometer (MS instrumental parameters for the analysis of chloro(2,2'',2"-terpyridinepalladium(II chloride dihydrate complex applying design of experiments methodology (DoE. This complex is of interest for potential use in the cancer therapy. DoE methodology was proved to succeed in optimization of many complex analytical problems. However, it has been poorly used for MALDI-TOF-MS optimization up to now. The theoretical mathematical relationships which explain the influence of important experimental factors (laser energy, grid voltage and number of laser shots on the selected responses (signal to noise – S/N ratio and the resolution – R of the leading peak is established. The optimal instrumental settings providing maximal S/N and R are identified and experimentally verified. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 172052 and Grant no. 172011

The Numerical and Experimental Analysis of Ballizing Process of Steel Tubes

Directory of Open Access Journals (Sweden)

Dyl T.

2017-06-01

Full Text Available This paper presents chosen results of experimental and numerical research of ballizing process of the steel tubes. Ballizing process is a method of burnishing technology of an internal diameter by precisely forcing a ball through a slightly undersized pre-machined tubes. Ballizing process is a fast, low-cost process for sizing and finishing tubes. It consists of pressing a slightly oversized ball through an unfinished tube to quickly bring the hole to desired size. The ball is typically made from a very hard material such as tungsten carbide or bearing steel. Ballizing process is by cold surface plastic forming of the surface structure, thereby leaving a layer of harder material and reducing its roughness. After theoretical and experimental analysis it was determined that the smaller the diameter of the balls, the bigger intensity of stress and strain and strain rate. The paper presents influence of ballizing process on the strain and stress state and on the surface roughness reduction rate of the steel tubes.

The role of sensation seeking, perceived peer pressure, and harmful alcohol use in riding with an alcohol-impaired driver.

Science.gov (United States)

Kim, Jun-Hong; Kim, Kwang Sik

2012-09-01

Alcohol-related motor vehicle collisions have been the top of policy agenda for more than three decades in Korea. Despite implementation of various traffic safety measures, some drivers' alcohol use and abuse has resulted in a high number of alcohol-impaired traffic fatalities every year. This paper presents the association of theoretical factors with behavior of riding with an alcohol-impaired driver (RAID) among all age groups in the Korean adult sample. The theoretical factors of the drivers are personality factor, socio-psychological factor, and alcohol-related behavioral risk factor. We utilized national survey data from 1007 respondents consisting of 703 males and 304 females aged 20-66 collected by Korean Institute of Criminology (KIC) to test our theorized model. Our results indicated that there were three major predictors of RAID involvement: sensation seeking propensity, perceived peer pressure, and frequent harmful drinking. Overall, prediction of RAID behavior by gender was mediated entirely through these predictors. The issue of males' higher risk of RAID involvements was addressed for effective communication strategies such as campaigns. Copyright © 2012 Elsevier Ltd. All rights reserved.