Gap filling strategies for defensible annual sums of net ecosystem exchange

DEFF Research Database (Denmark)

Falge, E.; Baldocchi, D.; Olson, R.

2001-01-01

ecosystem exchange (F-NEE) responses are being made among biome types, phenology patterns, and stress conditions. The comparisons are usually performed on annual sums of F-NEE; however, the average data coverage during a year is only 65%. Therefore, robust and consistent gap filling methods are required. We...... is investigated. The difference between annual F-NEE filled by MDV compared to F-NEE filled by Regr. ranged from -45 to +200 g C m(-2) per year (MDV-Regr.). Comparing LookUp and Regr. methods resulted in a difference (LookUp-Regr.) ranging from -30 to +150g Cm-2 per year. We also investigated the impact...... of replacing measurements at night, when turbulent mixing is insufficient. The nighttime correction for low friction velocities (u(*)) shifted annual F-NEE on average by +77 g C m(-2) per year, but in certain cases as much as +185 g C m-2 per year. Our results emphasize the need to standardize gap filling...

Postreplication repair gap filling in an Escherichia coli strain deficient in dnaB gene product

International Nuclear Information System (INIS)

Johnson, R.C.

1975-01-01

Gaps in daughter-strand DNA synthesized after exposure of Escherichia coli E279 to ultraviolet light are filled during reincubation at 30 0 C for 20 min. Escherichia coli E279 is phenotypically DnaB - when incubated at 43 0 C. Cells incubated at 43 0 C were tested for their ability to complete postreplication repair gap filling. It is concluded that the dnaB gene product is essential for postreplication repair gap filling and that the inhibition seen is not initially the result of degradation

Mechanical evaluation of bone gap filled with rigid formulations castor oil polyurethane and chitosan in horses

Directory of Open Access Journals (Sweden)

Rodrigo Crispim Moreira

Full Text Available ABSTRACT: Often fractures of long bones in horses are comminuted and form bone gaps, which represent a major challenge for the fixation of these fractures by loss of contact between the fragments. Bone grafts help in treating this kind of fracture and synthetic materials have been gaining ground because of the limitations of autologous and heterologous grafts. In this study were performed compressive non destructive test in 10 bones with complete cross-bone gap in mid-diaphyseal of the third metacarpal bone of horses. Using a mechanism of "crossing" the 10 bones were used in the three groups (control, castor oil poliuretane and chitosan according to the filling material. After the test with maximum load of 1000N bone had a gap filled by another material and the test was repeated. Deformations caused on the whole bone, plate and bone tissue near and distant of gap were evaluated, using strain gauges adhered to the surface at these locations. There was a reduction in bone deformation from 14% (control to 3,5% and 4,8% by filling the gap with Chitosan and castor oil respectively, and a reduction of strain on the plate of 96% and 85% by filling gap with chitosan and castor respectively. An increase in intensity and direction of deformations occurred in bone near to gap after its filling; however, there was no difference in bone deformations occurring far the gap.

A comparison of gap-filling approaches for Landsat-7 satellite data

KAUST Repository

Yin, Gaohong

2017-08-10

The purpose of this study is to assess the relative performance of four different gap-filling approaches across a range of land-surface conditions, including both homogeneous and heterogeneous areas as well as in scenes with abrupt changes in landscape elements. The techniques considered in this study include: (1) Kriging and co-Kriging; (2) geostatistical neighbourhood similar pixel interpolator (GNSPI); (3) a weighted linear regression (WLR) algorithm; and (4) the direct sampling (DS) method. To examine the impact of image availability and the influence of temporal distance on the selection of input training data (i.e. time separating the training data from the gap-filled target image), input images acquired within the same season (temporally close) as well as in different seasons (temporally far) to the target image were examined, as was the case of using information only within the target image itself. Root mean square error (RMSE), mean spectral angle (MSA), and coefficient of determination (R-2) were used as the evaluation metrics to assess the prediction results. In addition, the overall accuracy (OA) and kappa coefficient (kappa) were used to assess a land-cover classification based on the gap-filled images. Results show that all of the gap-filling approaches provide satisfactory results for the homogeneous case, with R-2 > 0.93 for bands 1 and 2 in all cases and R-2 > 0.80 for bands 3 and 4 in most cases. For the heterogeneous example, GNSPI performs the best, with R-2 > 0.85 for all tested cases. WLR and GNSPI exhibit equivalent accuracy when a temporally close input image is used (i.e. WLR and GNSPI both have an R-2 equal to 0.89 for band 1). For the case of abrupt changes in scene elements or in the absence of ancillary data, the DS approach outperforms the other tested methods.

A comparison of gap-filling approaches for Landsat-7 satellite data

KAUST Repository

Yin, Gaohong; Mariethoz, Gregoire; Sun, Ying; McCabe, Matthew

2017-01-01

The purpose of this study is to assess the relative performance of four different gap-filling approaches across a range of land-surface conditions, including both homogeneous and heterogeneous areas as well as in scenes with abrupt changes in landscape elements. The techniques considered in this study include: (1) Kriging and co-Kriging; (2) geostatistical neighbourhood similar pixel interpolator (GNSPI); (3) a weighted linear regression (WLR) algorithm; and (4) the direct sampling (DS) method. To examine the impact of image availability and the influence of temporal distance on the selection of input training data (i.e. time separating the training data from the gap-filled target image), input images acquired within the same season (temporally close) as well as in different seasons (temporally far) to the target image were examined, as was the case of using information only within the target image itself. Root mean square error (RMSE), mean spectral angle (MSA), and coefficient of determination (R-2) were used as the evaluation metrics to assess the prediction results. In addition, the overall accuracy (OA) and kappa coefficient (kappa) were used to assess a land-cover classification based on the gap-filled images. Results show that all of the gap-filling approaches provide satisfactory results for the homogeneous case, with R-2 > 0.93 for bands 1 and 2 in all cases and R-2 > 0.80 for bands 3 and 4 in most cases. For the heterogeneous example, GNSPI performs the best, with R-2 > 0.85 for all tested cases. WLR and GNSPI exhibit equivalent accuracy when a temporally close input image is used (i.e. WLR and GNSPI both have an R-2 equal to 0.89 for band 1). For the case of abrupt changes in scene elements or in the absence of ancillary data, the DS approach outperforms the other tested methods.

Using the Direct Sampling Multiple-Point Geostatistical Method for Filling Gaps in Landsat 7 ETM+ SLC-off Imagery

KAUST Repository

Yin, Gaohong

2016-05-01

Since the failure of the Scan Line Corrector (SLC) instrument on Landsat 7, observable gaps occur in the acquired Landsat 7 imagery, impacting the spatial continuity of observed imagery. Due to the highly geometric and radiometric accuracy provided by Landsat 7, a number of approaches have been proposed to fill the gaps. However, all proposed approaches have evident constraints for universal application. The main issues in gap-filling are an inability to describe the continuity features such as meandering streams or roads, or maintaining the shape of small objects when filling gaps in heterogeneous areas. The aim of the study is to validate the feasibility of using the Direct Sampling multiple-point geostatistical method, which has been shown to reconstruct complicated geological structures satisfactorily, to fill Landsat 7 gaps. The Direct Sampling method uses a conditional stochastic resampling of known locations within a target image to fill gaps and can generate multiple reconstructions for one simulation case. The Direct Sampling method was examined across a range of land cover types including deserts, sparse rural areas, dense farmlands, urban areas, braided rivers and coastal areas to demonstrate its capacity to recover gaps accurately for various land cover types. The prediction accuracy of the Direct Sampling method was also compared with other gap-filling approaches, which have been previously demonstrated to offer satisfactory results, under both homogeneous area and heterogeneous area situations. Studies have shown that the Direct Sampling method provides sufficiently accurate prediction results for a variety of land cover types from homogeneous areas to heterogeneous land cover types. Likewise, it exhibits superior performances when used to fill gaps in heterogeneous land cover types without input image or with an input image that is temporally far from the target image in comparison with other gap-filling approaches.

Mechanics of Fluid-Filled Interstitial Gaps. I. Modeling Gaps in a Compact Tissue.

Science.gov (United States)

Parent, Serge E; Barua, Debanjan; Winklbauer, Rudolf

2017-08-22

Fluid-filled interstitial gaps are a common feature of compact tissues held together by cell-cell adhesion. Although such gaps can in principle be the result of weak, incomplete cell attachment, adhesion is usually too strong for this to occur. Using a mechanical model of tissue cohesion, we show that, instead, a combination of local prevention of cell adhesion at three-cell junctions by fluidlike extracellular material and a reduction of cortical tension at the gap surface are sufficient to generate stable gaps. The size and shape of these interstitial gaps depends on the mechanical tensions between cells and at gap surfaces, and on the difference between intracellular and interstitial pressures that is related to the volume of the interstitial fluid. As a consequence of the dependence on tension/tension ratios, the presence of gaps does not depend on the absolute strength of cell adhesion, and similar gaps are predicted to occur in tissues of widely differing cohesion. Tissue mechanical parameters can also vary within and between cells of a given tissue, generating asymmetrical gaps. Within limits, these can be approximated by symmetrical gaps. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Efficiency and Fidelity of Human DNA Polymerases λ and β during Gap-Filling DNA Synthesis

Science.gov (United States)

Brown, Jessica A.; Pack, Lindsey R.; Sanman, Laura E.; Suo, Zucai

2010-01-01

The base excision repair (BER) pathway coordinates the replacement of 1 to 10 nucleotides at sites of single-base lesions. This process generates DNA substrates with various gap sizes which can alter the catalytic efficiency and fidelity of a DNA polymerase during gap-filling DNA synthesis. Here, we quantitatively determined the substrate specificity and base substitution fidelity of human DNA polymerase λ (Pol λ), an enzyme proposed to support the known BER DNA polymerase β (Pol β), as it filled 1- to 10-nucleotide gaps at 1-nucleotide intervals. Pol λ incorporated a correct nucleotide with relatively high efficiency until the gap size exceeded 9 nucleotides. Unlike Pol λ, Pol β did not have an absolute threshold on gap size as the catalytic efficiency for a correct dNTP gradually decreased as the gap size increased from 2 to 10 nucleotides and then recovered for non-gapped DNA. Surprisingly, an increase in gap size resulted in lower polymerase fidelity for Pol λ, and this downregulation of fidelity was controlled by its non-enzymatic N-terminal domains. Overall, Pol λ was up to 160-fold more error-prone than Pol β, thereby suggesting Pol λ would be more mutagenic during long gap-filling DNA synthesis. In addition, dCTP was the preferred misincorporation for Pol λ and its N-terminal domain truncation mutants. This nucleotide preference was shown to be dependent upon the identity of the adjacent 5′-template base. Our results suggested that both Pol λ and Pol β would catalyze nucleotide incorporation with the highest combination of efficiency and accuracy when the DNA substrate contains a single-nucleotide gap. Thus, Pol λ, like Pol β, is better suited to catalyze gap-filling DNA synthesis during short-patch BER in vivo, although, Pol λ may play a role in long-patch BER. PMID:20961817

Gap-Filling of Landsat 7 Imagery Using the Direct Sampling Method

KAUST Repository

Yin, Gaohong

2016-12-28

The failure of the Scan Line Corrector (SLC) on Landsat 7 imposed systematic data gaps on retrieved imagery and removed the capacity to provide spatially continuous fields. While a number of methods have been developed to fill these gaps, most of the proposed techniques are only applicable over relatively homogeneous areas. When they are applied to heterogeneous landscapes, retrieving image features and elements can become challenging. Here we present a gap-filling approach that is based on the adoption of the Direct Sampling multiple-point geostatistical method. The method employs a conditional stochastic resampling of known areas in a training image to simulate unknown locations. The approach is assessed across a range of both homogeneous and heterogeneous regions. Simulation results show that for homogeneous areas, satisfactory results can be obtained by simply adopting non-gap locations in the target image as baseline training data. For heterogeneous landscapes, bivariate simulations using an auxiliary variable acquired at a different date provides more accurate results than univariate simulations, especially as land cover complexity increases. Apart from recovering spatially continuous fields, one of the key advantages of the Direct Sampling is the relatively straightforward implementation process that relies on relatively few parameters.

Development and Testing of Physically-Based Methods for Filling Gaps in Remotely Sensed River Data

Science.gov (United States)

2011-09-30

Filling Gaps in Remotely Sensed River Data Jonathan M. Nelson US Geological Survey National Research Program Geomorphology and Sediment Transport...the research work carried out under this grant are to develop and test two methods for filling in gaps in remotely sensed river data. The first...information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215

Gap-Filling of Landsat 7 Imagery Using the Direct Sampling Method

Directory of Open Access Journals (Sweden)

Gaohong Yin

2016-12-01

Full Text Available The failure of the Scan Line Corrector (SLC on Landsat 7 imposed systematic data gaps on retrieved imagery and removed the capacity to provide spatially continuous fields. While a number of methods have been developed to fill these gaps, most of the proposed techniques are only applicable over relatively homogeneous areas. When they are applied to heterogeneous landscapes, retrieving image features and elements can become challenging. Here we present a gap-filling approach that is based on the adoption of the Direct Sampling multiple-point geostatistical method. The method employs a conditional stochastic resampling of known areas in a training image to simulate unknown locations. The approach is assessed across a range of both homogeneous and heterogeneous regions. Simulation results show that for homogeneous areas, satisfactory results can be obtained by simply adopting non-gap locations in the target image as baseline training data. For heterogeneous landscapes, bivariate simulations using an auxiliary variable acquired at a different date provides more accurate results than univariate simulations, especially as land cover complexity increases. Apart from recovering spatially continuous fields, one of the key advantages of the Direct Sampling is the relatively straightforward implementation process that relies on relatively few parameters.

Filling gaps and expanding spaces – voices of student teachers on ...

African Journals Online (AJOL)

Filling gaps and expanding spaces – voices of student teachers on their developing teacher identity ... by Kwan and Lopez-Real (2005) as the 'relational aspects of working together.' The main aim of the ...... and redesigning work. Ergonomics,.

Filling the Gap between IT Governance and IT Project Management

DEFF Research Database (Denmark)

Lundin, Jette

2007-01-01

there is a gap between IT governance and IT project management. Theory on IT governance assumes that strategies are implemented through projects - but do not go into detail on how to do it. Theories on project management do not include interaction with governance processes. A gap between IT governance...... and IT project management can result in IT that does not support business strategy and in lack of flexibility and agility. Competitive, changing business environments combined with the uncertainty and unpredictability of IT implementation projects call for IT governance organisation and processes to sense......The goal of this paper is to explore coordination mechanisms as part of a solution to fill the gap between IT Governance and IT project management. The Gap between IT governance and IT project management has not been fully explored in IT management research. Both in theory and in practice...

Gap filling strategies for long term energy flux data sets

NARCIS (Netherlands)

Falge, E.; Baldocchi, D.; Olson, R.; Anthoni, P.; Aubinet, M.; Bernhofer, C.; Burba, G.; Ceulemans, R.; Clement, R.; Dolman, H.; Granier, A.; Gross, P.; Grünwald, T.; Hollinger, D.; Jensen, N.O.; Katul, G.; Keronen, P.; Kowalski, A.; Lai, C.T.; Law, B.E.; Meyers, T.; Moncrieff, J.; Moors, E.J.; Munger, J.W.; Pilegaard, K.; Rebmann, C.; Suyker, A.; Tenhunen, J.; Tu, K.

2001-01-01

At present a network of over 100 field sites are measuring carbon dioxide, water vapor and sensible heat fluxes between the biosphere and atmosphere, on a nearly continuous basis. Gaps in the long term measurements of evaporation and sensible heat flux must be filled before these data can be used

Filling gaps and expanding spaces – voices of student teachers on ...

African Journals Online (AJOL)

Filling gaps and expanding spaces – voices of student teachers on their ... as part of a broader project – FIRE (Fourth-year Initiative for Research in Education), ... We wanted to determine how we could complement a community of practice ...

Enhancement of absorption of lower hybrid wave by filling the spectral gap

International Nuclear Information System (INIS)

Ide, S.; Naito, O.; Kondoh, T.; Ikeda, Y.; Ushigusa, K.

1994-01-01

The interaction between a lower hybrid wave (LHW) and electrons in a plasma has been investigated. An LHW of low phase velocity was injected into a plasma in addition to a high phase velocity LHW so as to fill the spectral gap which lies between the phase velocity of the faster wave and the thermal velocity of the electrons. It was found that the absorption of the faster wave was enhanced at the plasma outer region by injecting these waves simultaneously. As a result LH-driven current in the inner region of the plasma was reduced by the power absorbed in the outer region. The increase of the power absorption is attributed to the filling of the spectral gap by the slower wave

Annual sums of carbon dioxide exchange over a heterogeneous urban landscape through machine learning based gap-filling

Science.gov (United States)

Menzer, Olaf; Meiring, Wendy; Kyriakidis, Phaedon C.; McFadden, Joseph P.

2015-01-01

A small, but growing, number of flux towers in urban environments measure surface-atmospheric exchanges of carbon dioxide by the eddy covariance method. As in all eddy covariance studies, obtaining annual sums of urban CO2 exchange requires imputation of data gaps due to low turbulence and non-stationary conditions, adverse weather, and instrument failures. Gap-filling approaches that are widely used for measurements from towers in natural vegetation are based on light and temperature response models. However, they do not account for key features of the urban environment including tower footprint heterogeneity and localized CO2 sources. Here, we present a novel gap-filling modeling framework that uses machine learning to select explanatory variables, such as continuous traffic counts and temporal variables, and then constrains models separately for spatially classified subsets of the data. We applied the modeling framework to a three year time series of measurements from a tall broadcast tower in a suburban neighborhood of Minneapolis-Saint Paul, Minnesota, USA. The gap-filling performance was similar to that reported for natural measurement sites, explaining 64% to 88% of the variability in the fluxes. Simulated carbon budgets were in good agreement with an ecophysiological bottom-up study at the same site. Total annual carbon dioxide flux sums for the tower site ranged from 1064 to 1382 g C m-2 yr-1, across different years and different gap-filling methods. Bias errors of annual sums resulting from gap-filling did not exceed 18 g C m-2 yr-1 and random uncertainties did not exceed ±44 g C m-2 yr-1 (or ±3.8% of the annual flux). Regardless of the gap-filling method used, the year-to-year differences in carbon exchange at this site were small. In contrast, the modeled annual sums of CO2 exchange differed by a factor of two depending on wind direction. This indicated that the modeled time series captured the spatial variability in both the biogenic and

Surveillance - filling the gap between audits and inspection

International Nuclear Information System (INIS)

Coulombe, C.T.

1987-01-01

Historically, two major verification activities are accomplished at nuclear plants: audits and inspections. Both have their roots firmly planted in regulation. They are required elements of a quality assurance (QA) program. Inspection, focused on hardware, verifies that equipment meets its specified requirements. Auditing, focused on documentation, verifies, through objective evidence, that the QA program is being effectively implemented. Quality surveillance, focused on performance, verifies effective use of the plant's procedures and quality program. The surveillance concept provides a method to assure that the gap between the inspection function and the audit function is filled in

Filling gaps in bacterial amino acid biosynthesis pathways with high-throughput genetics.

Directory of Open Access Journals (Sweden)

Morgan N Price

2018-01-01

Full Text Available For many bacteria with sequenced genomes, we do not understand how they synthesize some amino acids. This makes it challenging to reconstruct their metabolism, and has led to speculation that bacteria might be cross-feeding amino acids. We studied heterotrophic bacteria from 10 different genera that grow without added amino acids even though an automated tool predicts that the bacteria have gaps in their amino acid synthesis pathways. Across these bacteria, there were 11 gaps in their amino acid biosynthesis pathways that we could not fill using current knowledge. Using genome-wide mutant fitness data, we identified novel enzymes that fill 9 of the 11 gaps and hence explain the biosynthesis of methionine, threonine, serine, or histidine by bacteria from six genera. We also found that the sulfate-reducing bacterium Desulfovibrio vulgaris synthesizes homocysteine (which is a precursor to methionine by using DUF39, NIL/ferredoxin, and COG2122 proteins, and that homoserine is not an intermediate in this pathway. Our results suggest that most free-living bacteria can likely make all 20 amino acids and illustrate how high-throughput genetics can uncover previously-unknown amino acid biosynthesis genes.

FILLED GAP EFFECT AND SEMANTIC PLAUSIBILITY IN BRAZILIAN PORTUGUESE SENTENCE PROCESSING

OpenAIRE

Marcus Maia

2014-01-01

The Filled Gap Effect (FGE) is investigated in Brazilian Portuguese through eye- tracking and self paced reading experiments. Results detect the presence of FGE, indicating that the parser is strictly syntactic in the early stage of processing. The final measures in the two experiments present discrepant results, motivating a discussion on possible good-enough effects.

Structural Transformation of Wireframe DNA Origami via DNA Polymerase Assisted Gap-Filling.

Science.gov (United States)

Agarwal, Nayan P; Matthies, Michael; Joffroy, Bastian; Schmidt, Thorsten L

2018-03-27

The programmability of DNA enables constructing nanostructures with almost any arbitrary shape, which can be decorated with many functional materials. Moreover, dynamic structures can be realized such as molecular motors and walkers. In this work, we have explored the possibility to synthesize the complementary sequences to single-stranded gap regions in the DNA origami scaffold cost effectively by a DNA polymerase rather than by a DNA synthesizer. For this purpose, four different wireframe DNA origami structures were designed to have single-stranded gap regions. This reduced the number of staple strands needed to determine the shape and size of the final structure after gap filling. For this, several DNA polymerases and single-stranded binding (SSB) proteins were tested, with T4 DNA polymerase being the best fit. The structures could be folded in as little as 6 min, and the subsequent optimized gap-filling reaction was completed in less than 3 min. The introduction of flexible gap regions results in fully collapsed or partially bent structures due to entropic spring effects. Finally, we demonstrated structural transformations of such deformed wireframe DNA origami structures with DNA polymerases including the expansion of collapsed structures and the straightening of curved tubes. We anticipate that this approach will become a powerful tool to build DNA wireframe structures more material-efficiently, and to quickly prototype and test new wireframe designs that can be expanded, rigidified, or mechanically switched. Mechanical force generation and structural transitions will enable applications in structural DNA nanotechnology, plasmonics, or single-molecule biophysics.

FILLED GAP EFFECT AND SEMANTIC PLAUSIBILITY IN BRAZILIAN PORTUGUESE SENTENCE PROCESSING

Directory of Open Access Journals (Sweden)

Marcus Maia

2014-12-01

Full Text Available The Filled Gap Effect (FGE is investigated in Brazilian Portuguese through eye- tracking and self paced reading experiments. Results detect the presence of FGE, indicating that the parser is strictly syntactic in the early stage of processing. The final measures in the two experiments present discrepant results, motivating a discussion on possible good-enough effects.

Gap-filling eddy-covariance data using a complex system of neural networks

Science.gov (United States)

Dúbrava, Matúš; Rebok, Tomáš; Havránková, Kateřina; Pavelka, Marian

2014-05-01

The eddy-covariance technique measures the flux of matter and energy between various ecosystems and the atmosphere. The fluxes characterize an interaction of the ecosystems with their surroundings and provide valuable knowledge to Global Climate Change issues. Among the main assets of the method belongs the possible evaluation of the carbon balance, expressed as the Net Ecosystem carbon Exchange (NEE) parameter. However, when unfavorable micro-meteorological conditions (e.g., stable stratification and low turbulent mixing) happen, measured fluxes are inaccurate and need to be corrected and/or gap-filled. Thus, there is a long-term challenge for many research teams from the flux community to develop the most accurate gap-filling method -- many statistical as well as empirical approaches have been proposed so far (e.g., mean replacement, interpolation, extrapolation, regression analysis, methods based on plant physiology depending on meteorological variables, etc.), each of them having its strengths and weaknesses. The artificial neural networks (ANNs) -- purely empirical non-linear regression models generally able to solve any fitness approximation and pattern recognition problem -- were proven as a promising approach and one of the most precise method for gap-filling the eddy-covariance data. However, even though providing encouraging results when considering a prediction error throughout the whole dataset, they considerably fail in fitting inherently present spikes in the NEE values. This drawback results from the nature of ANNs, since their ability to fit spikes is partly in contrast with their ability to reliably approximate previously unseen data -- while the spike fitting can be improved by an increasing number of training epochs, this often leads to ANNs over-fitting and thus losing their generalization ability, resulting in higher overall prediction error. Since the proper generalization ability has greater impact on the precision of the results, current

Gap filling of 3-D microvascular networks by tensor voting.

Science.gov (United States)

Risser, L; Plouraboue, F; Descombes, X

2008-05-01

We present a new algorithm which merges discontinuities in 3-D images of tubular structures presenting undesirable gaps. The application of the proposed method is mainly associated to large 3-D images of microvascular networks. In order to recover the real network topology, we need to fill the gaps between the closest discontinuous vessels. The algorithm presented in this paper aims at achieving this goal. This algorithm is based on the skeletonization of the segmented network followed by a tensor voting method. It permits to merge the most common kinds of discontinuities found in microvascular networks. It is robust, easy to use, and relatively fast. The microvascular network images were obtained using synchrotron tomography imaging at the European Synchrotron Radiation Facility. These images exhibit samples of intracortical networks. Representative results are illustrated.

Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases lambda and mu for nonhomologous end joining in human whole-cell extracts.

Science.gov (United States)

Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P; Lee, Kyung-Jong; Chen, David J; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F

2009-07-01

XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5' or 3' overhangs, and no joining at all of partially complementary 3' overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped using dideoxynucleotides revealed that there was no gap filling on aligned DSB ends in the Cernunnos-deficient extracts. Recombinant Cernunnos protein restored gap filling and end joining of partially complementary overhangs, and stimulated joining of cohesive ends more than twentyfold. XLF-dependent gap filling was nearly eliminated by immunodepletion of DNA polymerase lambda, but was restored by addition of either polymerase lambda or polymerase mu. Thus, Cernunnos is essential for gap filling by either polymerase during nonhomologous end joining, suggesting that it plays a major role in aligning the two DNA ends in the repair complex.

A technique for filling gaps in time series with complicated power spectra

International Nuclear Information System (INIS)

Brown, T.M.

1984-01-01

Fahlman and Ulrych (1982) describe a method for estimating the power and phase spectra of gapped time series, using a maximum-entropy reconstruction of the data in the gaps. It has proved difficult to apply this technique to solar oscillations data, because of the great complexity of the solar oscillations spectrum. We describe a means for avoiding this difficulty, and report the results of a series of blind tests of the modified technique. The main results of these tests are: 1. Gap-filling gives good results, provided that the signal-to-noise ration in the original data is large enough, and provided the gaps are short enough. For low-noise data, the duty cycle of the observations should not be less than about 50%. 2. The frequencies and widths of narrow spectrum features are well reproduced by the technique. 3. The technique systematically reduces the apparent amplitudes of small features in the spectrum relative to large ones. (orig.)

Inpainting approaches to fill in detector gaps in phase contrast computed tomography

Science.gov (United States)

Brun, F.; Delogu, P.; Longo, R.; Dreossi, D.; Rigon, L.

2018-01-01

Photon counting semiconductor detectors in radiation imaging present attractive properties, such as high efficiency, low noise, and energy sensitivity. The very complex electronics limits the sensitive area of current devices to a few square cm. This disadvantage is often compensated by tiling a larger matrix with an adequate number of detector units but this usually results in non-negligible insensitive gaps between two adjacent modules. When considering the case of Computed Tomography (CT), these gaps lead to degraded reconstructed images with severe streak and ring artifacts. This work presents two digital image processing solutions to fill in these gaps when considering the specific case of synchrotron radiation x-ray parallel beam phase contrast CT. While not discussed with experimental data, other CT modalities, such as spectral, cone beam and other geometries might benefit from the presented approaches.

Filling the Gap: Integrating STEM into Career and Technical Education Middle School Programs

Science.gov (United States)

Wu-Rorrer, Ray

2017-01-01

The field of STEM education is an educational framework that has surged in application over the past decade. Science, Technology, Engineering, and Math (STEM) is infused in nearly every facet of our society. Filling the gap of current research in middle school career and technical education (CTE) and STEM programs is important as traditional CTE…

Evaluation of analytical reconstruction with a new gap-filling method in comparison to iterative reconstruction in [11C]-raclopride PET studies

International Nuclear Information System (INIS)

Tuna, U.; Johansson, J.; Ruotsalainen, U.

2014-01-01

The aim of the study was (1) to evaluate the reconstruction strategies with dynamic [ 11 C]-raclopride human positron emission tomography (PET) studies acquired from ECAT high-resolution research tomograph (HRRT) scanner and (2) to justify for the selected gap-filling method for analytical reconstruction with simulated phantom data. A new transradial bicubic interpolation method has been implemented to enable faster analytical 3D-reprojection (3DRP) reconstructions for the ECAT HRRT PET scanner data. The transradial bicubic interpolation method was compared to the other gap-filling methods visually and quantitatively using the numerical Shepp-Logan phantom. The performance of the analytical 3DRP reconstruction method with this new gap-filling method was evaluated in comparison with the iterative statistical methods: ordinary Poisson ordered subsets expectation maximization (OPOSEM) and resolution modeled OPOSEM methods. The image reconstruction strategies were evaluated using human data at different count statistics and consequently at different noise levels. In the assessments, 14 [ 11 C]-raclopride dynamic PET studies (test-retest studies of 7 healthy subjects) acquired from the HRRT PET scanner were used. Besides the visual comparisons of the methods, we performed regional quantitative evaluations over the cerebellum, caudate and putamen structures. We compared the regional time-activity curves (TACs), areas under the TACs and binding potential (BP ND ) values. The results showed that the new gap-filling method preserves the linearity of the 3DRP method. Results with the 3DRP after gap-filling method exhibited hardly any dependency on the count statistics (noise levels) in the sinograms while we observed changes in the quantitative results with the EM-based methods for different noise contamination in the data. With this study, we showed that 3DRP with transradial bicubic gap-filling method is feasible for the reconstruction of high-resolution PET data with

A Comparison of Three Gap Filling Techniques for Eddy Covariance Net Carbon Fluxes in Short Vegetation Ecosystems

Directory of Open Access Journals (Sweden)

Xiaosong Zhao

2015-01-01

Full Text Available Missing data is an inevitable problem when measuring CO2, water, and energy fluxes between biosphere and atmosphere by eddy covariance systems. To find the optimum gap-filling method for short vegetations, we review three-methods mean diurnal variation (MDV, look-up tables (LUT, and nonlinear regression (NLR for estimating missing values of net ecosystem CO2 exchange (NEE in eddy covariance time series and evaluate their performance for different artificial gap scenarios based on benchmark datasets from marsh and cropland sites in China. The cumulative errors for three methods have no consistent bias trends, which ranged between −30 and +30 mgCO2 m−2 from May to October at three sites. To reduce sum bias in maximum, combined gap-filling methods were selected for short vegetation. The NLR or LUT method was selected after plant rapidly increasing in spring and before the end of plant growing, and MDV method was used to the other stage. The sum relative error (SRE of optimum method ranged between −2 and +4% for four-gap level at three sites, except for 55% gaps at soybean site, which also obviously reduced standard deviation of error.

Gap-filling meteorological variables with Empirical Orthogonal Functions

Science.gov (United States)

Graf, Alexander

2017-04-01

Gap-filling or modelling surface-atmosphere fluxes critically depends on an, ideally continuous, availability of their meteorological driver variables, such as e.g. air temperature, humidity, radiation, wind speed and precipitation. Unlike for eddy-covariance-based fluxes, data gaps are not unavoidable for these measurements. Nevertheless, missing or erroneous data can occur in practice due to instrument or power failures, disturbance, and temporary sensor or station dismounting for e.g. agricultural management or maintenance. If stations with similar measurements are available nearby, using their data for imputation (i.e. estimating missing data) either directly, after an elevation correction or via linear regression, is usually preferred over linear interpolation or monthly mean diurnal cycles. The popular implementation of regional networks of (partly low-cost) stations increases both, the need and the potential, for such neighbour-based imputation methods. For repeated satellite imagery, Beckers and Rixen (2003) suggested an imputation method based on empirical orthogonal functions (EOFs). While exploiting the same linear relations between time series at different observation points as regression, it is able to use information from all observation points to simultaneously estimate missing data at all observation points, provided that never all observations are missing at the same time. Briefly, the method uses the ability of the first few EOFs of a data matrix to reconstruct a noise-reduced version of this matrix; iterating missing data points from an initial guess (the column-wise averages) to an optimal version determined by cross-validation. The poster presents and discusses lessons learned from adapting and applying this methodology to station data. Several years of 10-minute averages of air temperature, pressure and humidity, incoming shortwave, longwave and photosynthetically active radiation, wind speed and precipitation, measured by a regional (70 km by

Bone-femoral component interface gap after sagittal mechanical axis alignment is filled with new bone after cementless total knee arthroplasty.

Science.gov (United States)

Kuriyama, Shinichi; Hyakuna, Katsufumi; Inoue, Satoshi; Kawai, Yasutsugu; Tamaki, Yasuyuki; Ito, Hiromu; Matsuda, Shuichi

2018-05-01

This study retrospectively evaluated the fate of mismatch between an uncemented femoral component and each femoral cut surface (i.e., wedge-shaped gap) relative to sagittal mechanical alignment in total knee arthroplasty (TKA). Primary TKA was performed on 99 consecutive knees. The femoral components were aligned to the sagittal mechanical axis with CT-based navigation. All patients were assessed with postoperative true lateral radiographs. Bone-side surfaces of the uncemented femoral component were divided into five zones: anterior flange, anterior chamfer, posterior chamfer, posterior part, and distal part, which were defined as zones 1 to 5, respectively. Bone filling of wedge-shaped gaps in each zone was evaluated after 1 year. Femoral anterior notching did not occur. However, wedge-shaped gaps were observed in at least one zone in 23 of 99 knees (23%), most frequently in zone 5 (18%). There were 9 and 7 gaps in zones 1 and 2, respectively. The femoral component showed malpositioning of approximately 3° of flexion in cases with wedge-shaped gaps in zones 2 and/or 5. After one year, 67% (6/9) of zone 1, 100% (7/7) of zone 2, and 94% (17/18) of zone 5 wedge-shaped gaps were filled in with new bone. Femoral alignment relative to sagittal mechanical axis caused wedge-shaped gaps due to unstable anterior bone cutting through hard bone, but the small gaps were not clinically significant and filled in within one year. Sagittal setting of the femoral component should aim for the anatomical axis rather than the mechanical axis. IV.

Influence of filling fraction on the defect mode and gap closing of a one-dimensional photonic crystal: An analytical approach

International Nuclear Information System (INIS)

Ansari, N.; Tehranchi, M.M.

2010-01-01

Study of the optical properties of the one-dimensional defective photonic crystals using the gap map is improving through the emergence of new analytical methods, which are easy and without any physical restrictions. Gap map is able to monitor the changes in the defect mode frequencies and photonic band gap regions as a function of filling fractions, and all visible spectra in a single graphic presentation. In this paper, by utilizing a novel technique based on Green's function method for analyzing the defect modes, the gap map and gap closing point of a one-dimensional defective photonic crystal have been demonstrated. This method enables study of the defect modes inside the omnidirectional band gap, which is an important object in the designing of the optical filters. Moreover, as a designing criterion, obtaining the gap closing points inside the gap map enables finding of some filling fraction intervals that each one contains several distinct omnidirectional band gaps simultaneously, using a single photonic crystal. This method has been employed for the design of an optical filter at 1.3 and 1.55 μm, which is applicable for telecommunication.

A micro-gap, air-filled ionisation chamber as a detector for criticality accident dosimetry

International Nuclear Information System (INIS)

Murawski, I.; Zielczynski, M.; Gryzinski, M.A.; Golnik, N.

2014-01-01

A micro-gap air-filled ionisation chamber was designed for criticality dosimetry. The special feature of the chamber is its very small gap between electrodes of only 0.3 mm. This prevents ion recombination at high dose rates and minimises the influence of gas on secondary particles spectrum. The electrodes are made of polypropylene because of higher content of hydrogen in this material, when compared with soft tissue. The difference between neutron and gamma sensitivity in such chamber becomes practically negligible. The chamber's envelope contains two specially connected capacitors, one for polarising the electrodes and the other for collecting the ionisation charge. Air-filled ionisation chamber with very small gap is a simple dosemeter, which fulfills the most desired properties of criticality accident dosemeters. Short ion collection time is achieved by combination of small gap and relatively high polarising voltage. For the same reason, parasitic recombination of ions in the chamber is negligibly small even at high dose rates. The difference between neutron and gamma sensitivity is small for tissue-equivalent chamber and is expected to become practically negligible when the chamber electrodes are made of polypropylene. Additional capacitor provides a broad measuring range from ∼0.1 Gy up to ∼25 Gy; however, leakage of electrical charge from polarising capacitor has to be observed and taken into account. Periodical re-charging of the device is necessary. Obviously, final test of the device in conditions simulating criticality accident is needed and will be performed as soon as available. (authors)

Gap Filling of Daily Sea Levels by Artificial Neural Networks

Directory of Open Access Journals (Sweden)

Lyubka Pashova

2013-06-01

Full Text Available In the recent years, intelligent methods as artificial neural networks are successfully applied for data analysis from different fields of the geosciences. One of the encountered practical problems is the availability of gaps in the time series that prevent their comprehensive usage for the scientific and practical purposes. The article briefly describes two types of the artificial neural network (ANN architectures - Feed-Forward Backpropagation (FFBP and recurrent Echo state network (ESN. In some cases, the ANN can be used as an alternative on the traditional methods, to fill in missing values in the time series. We have been conducted several experiments to fill the missing values of daily sea levels spanning a 5-years period using both ANN architectures. A multiple linear regression for the same purpose has been also applied. The sea level data are derived from the records of the tide gauge Burgas, which is located on the western Black Sea coast. The achieved results have shown that the performance of ANN models is better than that of the classical one and they are very promising for the real-time interpolation of missing data in the time series.

Noise Reduction and Gap Filling of fAPAR Time Series Using an Adapted Local Regression Filter

Directory of Open Access Journals (Sweden)

Álvaro Moreno

2014-08-01

Full Text Available Time series of remotely sensed data are an important source of information for understanding land cover dynamics. In particular, the fraction of absorbed photosynthetic active radiation (fAPAR is a key variable in the assessment of vegetation primary production over time. However, the fAPAR series derived from polar orbit satellites are not continuous and consistent in space and time. Filtering methods are thus required to fill in gaps and produce high-quality time series. This study proposes an adapted (iteratively reweighted local regression filter (LOESS and performs a benchmarking intercomparison with four popular and generally applicable smoothing methods: Double Logistic (DLOG, smoothing spline (SSP, Interpolation for Data Reconstruction (IDR and adaptive Savitzky-Golay (ASG. This paper evaluates the main advantages and drawbacks of the considered techniques. The results have shown that ASG and the adapted LOESS perform better in recovering fAPAR time series over multiple controlled noisy scenarios. Both methods can robustly reconstruct the fAPAR trajectories, reducing the noise up to 80% in the worst simulation scenario, which might be attributed to the quality control (QC MODIS information incorporated into these filtering algorithms, their flexibility and adaptation to the upper envelope. The adapted LOESS is particularly resistant to outliers. This method clearly outperforms the other considered methods to deal with the high presence of gaps and noise in satellite data records. The low RMSE and biases obtained with the LOESS method (|rMBE| < 8%; rRMSE < 20% reveals an optimal reconstruction even in most extreme situations with long seasonal gaps. An example of application of the LOESS method to fill in invalid values in real MODIS images presenting persistent cloud and snow coverage is also shown. The LOESS approach is recommended in most remote sensing applications, such as gap-filling, cloud-replacement, and observing temporal

Superior PSZ-SOD Gap-Fill Process Integration Using Ultra-Low Dispensation Amount in STI for 28 nm NAND Flash Memory and Beyond

Directory of Open Access Journals (Sweden)

Chun Chi Lai

2015-01-01

Full Text Available The gap-fill performance and process of perhydropolysilazane-based inorganic spin-on dielectric (PSZ-SOD film in shallow trench isolation (STI with the ultra-low dispensation amount of PSZ-SOD solution have been investigated in this study. A PSZ-SOD film process includes liner deposition, PSZ-SOD coating, and furnace curing. For liner deposition, hydrophilic property is required to improve the contact angle and gap-fill capability of PSZ-SOD coating. Prior to PSZ-SOD coating, the additional treatment on liner surface is beneficial for the fluidity of PSZ-SOD solution. The superior film thickness uniformity and gap-fill performance of PSZ-SOD film are achieved due to the improved fluidity of PSZ-SOD solution. Following that up, the low dispensation rate of PSZ-SOD solution leads to more PSZ-SOD filling in the trenches. After PSZ-SOD coating, high thermal curing process efficiently promotes PSZ-SOD film conversion into silicon oxide. Adequate conversion from PSZ-SOD into silicon oxide further increases the etching resistance inside the trenches. Integrating the above sequence of optimized factors, void-free gap-fill and well-controlled STI recess uniformity are achieved even when the PSZ-SOD solution dispensation volume is reduced 3 to 6 times compared with conventional condition for the 28 nm node NAND flash and beyond.

Designing a clinical dashboard to fill information gaps in the emergency department.

Science.gov (United States)

Swartz, Jordan L; Cimino, James J; Fred, Matthew R; Green, Robert A; Vawdrey, David K

2014-01-01

Data fragmentation within electronic health records causes gaps in the information readily available to clinicians. We investigated the information needs of emergency medicine clinicians in order to design an electronic dashboard to fill information gaps in the emergency department. An online survey was distributed to all emergency medicine physicians at a large, urban academic medical center. The survey response rate was 48% (52/109). The clinical information items reported to be most helpful while caring for patients in the emergency department were vital signs, electrocardiogram (ECG) reports, previous discharge summaries, and previous lab results. Brief structured interviews were also conducted with 18 clinicians during their shifts in the emergency department. From the interviews, three themes emerged: 1) difficulty accessing vital signs, 2) difficulty accessing point-of-care tests, and 3) difficulty comparing the current ECG with the previous ECG. An emergency medicine clinical dashboard was developed to address these difficulties.

Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases ? and ? for nonhomologous end joining in human whole-cell extracts

OpenAIRE

Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P.; Lee, Kyung-Jong; Chen, David J.; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F.

2009-01-01

XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5? or 3? overhangs, and no joining at all of partially complementary 3? overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped us...

Hyper-active gap filling

Directory of Open Access Journals (Sweden)

Akira eOmaki

2015-04-01

Full Text Available Much work has demonstrated that speakers of verb-final languages are able to construct rich syntactic representations in advance of verb information. This may reflect general architectural properties of the language processor, or it may only reflect a language-specific adaptation to the demands of verb-finality. The present study addresses this issue by examining whether speakers of a verb-medial language (English wait to consult verb transitivity information before constructing filler-gap dependencies, where internal arguments are fronted and hence precede the verb. This configuration makes it possible to investigate whether the parser actively makes representational commitments on the gap position before verb transitivity information becomes available. A key prediction of the view that rich pre-verbal structure-building is a general architectural property is that speakers of verb-medial languages should predictively construct dependencies in advance of verb transitivity information, and therefore that disruption should be observed when the verb has intransitive subcategorization frames that are incompatible with the predicted structure. In three reading experiments (self-paced and eye-tracking that manipulated verb transitivity, we found evidence for reading disruption when the verb was intransitive, although no such reading difficulty was observed when the critical verb was embedded inside a syntactic island structure, which blocks filler-gap dependency completion. These results are consistent with the hypothesis that in English, as in verb-final languages, information from preverbal NPs is sufficient to trigger active dependency completion without having access to verb transitivity information.

Hyper-active gap filling.

Science.gov (United States)

Omaki, Akira; Lau, Ellen F; Davidson White, Imogen; Dakan, Myles L; Apple, Aaron; Phillips, Colin

2015-01-01

Much work has demonstrated that speakers of verb-final languages are able to construct rich syntactic representations in advance of verb information. This may reflect general architectural properties of the language processor, or it may only reflect a language-specific adaptation to the demands of verb-finality. The present study addresses this issue by examining whether speakers of a verb-medial language (English) wait to consult verb transitivity information before constructing filler-gap dependencies, where internal arguments are fronted and hence precede the verb. This configuration makes it possible to investigate whether the parser actively makes representational commitments on the gap position before verb transitivity information becomes available. A key prediction of the view that rich pre-verbal structure building is a general architectural property is that speakers of verb-medial languages should predictively construct dependencies in advance of verb transitivity information, and therefore that disruption should be observed when the verb has intransitive subcategorization frames that are incompatible with the predicted structure. In three reading experiments (self-paced and eye-tracking) that manipulated verb transitivity, we found evidence for reading disruption when the verb was intransitive, although no such reading difficulty was observed when the critical verb was embedded inside a syntactic island structure, which blocks filler-gap dependency completion. These results are consistent with the hypothesis that in English, as in verb-final languages, information from preverbal noun phrases is sufficient to trigger active dependency completion without having access to verb transitivity information.

Filling the gaps in SCWR materials research: advanced nuclear corrosion research facilities in Hamilton

International Nuclear Information System (INIS)

Krausher, J.L.; Zheng, W.; Li, J.; Guzonas, D.; Botton, G.

2011-01-01

Research efforts on materials selection and development in support of the design of supercritical water-cooled reactors (SCWRs) have produced a considerable amount of data on corrosion, creep and other related properties. Summaries of the data on corrosion [1] and stress corrosion cracking [2] have recently been produced. As research on the SCWR advances, gaps and limitations in the published data are being identified. In terms of corrosion properties, these gaps can be seen in several areas, including: 1) the test environment, 2) the physical and chemical severity of the tests conducted as compared with likely reactor service/operating conditions, and 3) the test methods used. While some of these gaps can be filled readily using existing facilities, others require the availability of advanced test facilities for specific tests and assessments. In this paper, highlights of the new materials research facilities jointly established in Hamilton by CANMET Materials Technology Laboratory and McMaster University are presented. (author)

Bulk-Fill Resin Composites

DEFF Research Database (Denmark)

Benetti, Ana Raquel; Havndrup-Pedersen, Cæcilie; Honoré, Daniel

2015-01-01

the restorative procedure. The aim of this study, therefore, was to compare the depth of cure, polymerization contraction, and gap formation in bulk-fill resin composites with those of a conventional resin composite. To achieve this, the depth of cure was assessed in accordance with the International Organization...... for Standardization 4049 standard, and the polymerization contraction was determined using the bonded-disc method. The gap formation was measured at the dentin margin of Class II cavities. Five bulk-fill resin composites were investigated: two high-viscosity (Tetric EvoCeram Bulk Fill, SonicFill) and three low......-viscosity (x-tra base, Venus Bulk Fill, SDR) materials. Compared with the conventional resin composite, the high-viscosity bulk-fill materials exhibited only a small increase (but significant for Tetric EvoCeram Bulk Fill) in depth of cure and polymerization contraction, whereas the low-viscosity bulk...

Bridging the Gap: The Role of Research in Science Education

Science.gov (United States)

Adams, M. L.; Michael, P. J.

2001-12-01

Teaching in K-12 science classrooms across the country does not accurately model the real processes of science. To fill this gap, programs that integrate science education and research are imperative. Teachers Experiencing Antarctica and the Arctic (TEA) is a program sponsored and supported by many groups including NSF, the Division of Elementary, Secondary, and Informal Education (ESIE), and the American Museum of Natural History (AMNH). It places teachers in partnerships with research scientists conducting work in polar regions. TEA immerses K-12 teachers in the processes of scientific investigation and enables conveyance of the experience to the educational community and public at large. The TEA program paired me with Dr. Peter Michael from the University of Tulsa to participate in AMORE (Arctic Mid-Ocean Ridge Expedition) 2001. This international mission, combining the efforts of the USCGC Healy and RV Polarstern, involved cutting-edge research along the geologically and geophysically unsampled submarine Gakkel Ridge. While in the field, I was involved with dredge operations, CTD casts, rock cataloging/ processing, and bathymetric mapping. While immersed in these aspects of research, daily journals documented the scientific research and human aspects of life and work on board the Healy. E-mail capabilities allowed the exchange of hundreds of questions, answers and comments over the course of our expedition. The audience included students, numerous K-12 teachers, research scientists, NSF personnel, strangers, and the press. The expedition interested and impacted hundreds of individuals as it was proceeding. The knowledge gained by science educators through research expeditions promotes an understanding of what research science is all about. It gives teachers a framework on which to build strong, well-prepared students with a greater awareness of the role and relevance of scientific research. Opportunities such as this provide valauble partnerships that bridge

Filling the gap in the European administrative space: The role of administrative networks in EU implementation and enforcement

NARCIS (Netherlands)

Mastenbroek, E.; Sindbjerg Martinsen, D.

2018-01-01

European administrative networks (EANs) are a key building block of the European Administrative Space (EAS). Crucially, they are to fill the gap between the EU’s policy ambitions and its limited administrative capacities. Whereas ample research has been done on policy preparation networks, the role

Hyper-active gap filling

OpenAIRE

Omaki, Akira; Lau, Ellen F.; Davidson White, Imogen; Dakan, Myles L.; Apple, Aaron; Phillips, Colin

2015-01-01

Much work has demonstrated that speakers of verb-final languages are able to construct rich syntactic representations in advance of verb information. This may reflect general architectural properties of the language processor, or it may only reflect a language-specific adaptation to the demands of verb-finality. The present study addresses this issue by examining whether speakers of a verb-medial language (English) wait to consult verb transitivity information before constructing filler-gap d...

Comparative scaffolding and gap filling of ancient bacterial genomes applied to two ancient Yersinia pestis genomes

Science.gov (United States)

Doerr, Daniel; Chauve, Cedric

2017-01-01

Yersinia pestis is the causative agent of the bubonic plague, a disease responsible for several dramatic historical pandemics. Progress in ancient DNA (aDNA) sequencing rendered possible the sequencing of whole genomes of important human pathogens, including the ancient Y. pestis strains responsible for outbreaks of the bubonic plague in London in the 14th century and in Marseille in the 18th century, among others. However, aDNA sequencing data are still characterized by short reads and non-uniform coverage, so assembling ancient pathogen genomes remains challenging and often prevents a detailed study of genome rearrangements. It has recently been shown that comparative scaffolding approaches can improve the assembly of ancient Y. pestis genomes at a chromosome level. In the present work, we address the last step of genome assembly, the gap-filling stage. We describe an optimization-based method AGapEs (ancestral gap estimation) to fill in inter-contig gaps using a combination of a template obtained from related extant genomes and aDNA reads. We show how this approach can be used to refine comparative scaffolding by selecting contig adjacencies supported by a mix of unassembled aDNA reads and comparative signal. We applied our method to two Y. pestis data sets from the London and Marseilles outbreaks, for which we obtained highly improved genome assemblies for both genomes, comprised of, respectively, five and six scaffolds with 95 % of the assemblies supported by ancient reads. We analysed the genome evolution between both ancient genomes in terms of genome rearrangements, and observed a high level of synteny conservation between these strains. PMID:29114402

A multi-source precipitation approach to fill gaps over a radar precipitation field

Science.gov (United States)

Tesfagiorgis, K. B.; Mahani, S. E.; Khanbilvardi, R.

2012-12-01

Satellite Precipitation Estimates (SPEs) may be the only available source of information for operational hydrologic and flash flood prediction due to spatial limitations of radar and gauge products. The present work develops an approach to seamlessly blend satellite, radar, climatological and gauge precipitation products to fill gaps over ground-based radar precipitation fields. To mix different precipitation products, the bias of any of the products relative to each other should be removed. For bias correction, the study used an ensemble-based method which aims to estimate spatially varying multiplicative biases in SPEs using a radar rainfall product. Bias factors were calculated for a randomly selected sample of rainy pixels in the study area. Spatial fields of estimated bias were generated taking into account spatial variation and random errors in the sampled values. A weighted Successive Correction Method (SCM) is proposed to make the merging between error corrected satellite and radar rainfall estimates. In addition to SCM, we use a Bayesian spatial method for merging the gap free radar with rain gauges, climatological rainfall sources and SPEs. We demonstrate the method using SPE Hydro-Estimator (HE), radar- based Stage-II, a climatological product PRISM and rain gauge dataset for several rain events from 2006 to 2008 over three different geographical locations of the United States. Results show that: the SCM method in combination with the Bayesian spatial model produced a precipitation product in good agreement with independent measurements. The study implies that using the available radar pixels surrounding the gap area, rain gauge, PRISM and satellite products, a radar like product is achievable over radar gap areas that benefits the scientific community.

Mechanics of Fluid-Filled Interstitial Gaps. II. Gap Characteristics in Xenopus Embryonic Ectoderm.

Science.gov (United States)

Barua, Debanjan; Parent, Serge E; Winklbauer, Rudolf

2017-08-22

The ectoderm of the Xenopus embryo is permeated by a network of channels that appear in histological sections as interstitial gaps. We characterized this interstitial space by measuring gap sizes, angles formed between adjacent cells, and curvatures of cell surfaces at gaps. From these parameters, and from surface-tension values measured previously, we estimated the values of critical mechanical variables that determine gap sizes and shapes in the ectoderm, using a general model of interstitial gap mechanics. We concluded that gaps of 1-4 μm side length can be formed by the insertion of extracellular matrix fluid at three-cell junctions such that cell adhesion is locally disrupted and a tension difference between cell-cell contacts and the free cell surface at gaps of 0.003 mJ/m 2 is generated. Furthermore, a cell hydrostatic pressure of 16.8 ± 1.7 Pa and an interstitial pressure of 3.9 ± 3.6 Pa, relative to the central blastocoel cavity of the embryo, was found to be consistent with the observed gap size and shape distribution. Reduction of cell adhesion by the knockdown of C-cadherin increased gap volume while leaving intracellular and interstitial pressures essentially unchanged. In both normal and adhesion-reduced ectoderm, cortical tension of the free cell surfaces at gaps does not return to the high values characteristic of the free surface of the whole tissue. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Gap-filling of dry weather flow rate and water quality measurements in urban catchments by a time series modelling approach

DEFF Research Database (Denmark)

Sandoval, Santiago; Vezzaro, Luca; Bertrand-Krajewski, Jean-Luc

2016-01-01

seeks to evaluate the potential of the Singular Spectrum Analysis (SSA), a time-series modelling/gap-filling method, to complete dry weather time series. The SSA method is tested by reconstructing 1000 artificial discontinuous time series, randomly generated from real flow rate and total suspended......Flow rate and water quality dry weather time series in combined sewer systems might contain an important amount of missing data due to several reasons, such as failures related to the operation of the sensor or additional contributions during rainfall events. Therefore, the approach hereby proposed...... solids (TSS) online measurements (year 2007, 2 minutes time-step, combined system, Ecully, Lyon, France). Results show up the potential of the method to fill gaps longer than 0.5 days, especially between 0.5 days and 1 day (mean NSE > 0.6) in the flow rate time series. TSS results still perform very...

The tight binding model study of the role of band filling on the charge gap in graphene-on-substrate in paramagnetic state

Science.gov (United States)

Panda, Rudrashish; Sahu, Sivabrata; Rout, G. C.

2017-05-01

We communicate here a tight binding theoretical model study of the band filling effect on the charge gap in graphene-on-substrate. The Hamiltonian consists of nearest neighbor electron hopping and substrate induced gap. Besides this the Coulomb interaction is considered here within mean-field approximation in the paramagnetic limit. The electron occupancies at two sublattices are calculated by Green's function technique and are solved self consistently. Finally the charge gap i.e. Δ ¯=U [ - ] is calculated and computed numerically. The results are reported.

High-biomass C4 grasses-Filling the yield gap.

Science.gov (United States)

Mullet, John E

2017-08-01

A significant increase in agricultural productivity will be required by 2050 to meet the needs of an expanding and rapidly developing world population, without allocating more land and water resources to agriculture, and despite slowing rates of grain yield improvement. This review examines the proposition that high-biomass C 4 grasses could help fill the yield gap. High-biomass C 4 grasses exhibit high yield due to C 4 photosynthesis, long growth duration, and efficient capture and utilization of light, water, and nutrients. These C 4 grasses exhibit high levels of drought tolerance during their long vegetative growth phase ideal for crops grown in water-limited regions of agricultural production. The stems of some high-biomass C 4 grasses can accumulate high levels of non-structural carbohydrates that could be engineered to enhance biomass yield and utility as feedstocks for animals and biofuels production. The regulatory pathway that delays flowering of high-biomass C 4 grasses in long days has been elucidated enabling production and deployment of hybrids. Crop and landscape-scale modeling predict that utilization of high-biomass C 4 grass crops on land and in regions where water resources limit grain crop yield could increase agricultural productivity. Copyright © 2017 Elsevier B.V. All rights reserved.

Integration of different data gap filling techniques to facilitate assessment of polychlorinated biphenyls: A proof of principle case study (ASCCT meeting)

Science.gov (United States)

Data gap filling techniques are commonly used to predict hazard in the absence of empirical data. The most established techniques are read-across, trend analysis and quantitative structure-activity relationships (QSARs). Toxic equivalency factors (TEFs) are less frequently used d...

Pharmacy-level barriers to implementing expedited partner therapy in Baltimore, Maryland.

Science.gov (United States)

Qin, Jennifer Z; Diniz, Clarissa P; Coleman, Jenell S

2018-05-01

Addressing record high rates of Chlamydia trachomatis incidence in the United States requires the utilization of effective strategies, such as expedited partner therapy, to reduce reinfection and further transmission. Expedited partner therapy, which can be given as a prescription or medication, is a strategy to treat the sexual partners of index patients diagnosed with a sexually transmitted infection without prior medical evaluation of the partners. There are multiple steps in the prescription-expedited partner therapy cascade, and we sought to identify pharmacy-level barriers to implementing prescription-expedited partner therapy for Chlamydia trachomatis treatment. We used spatial analysis and ArcGIS, a geographic information system, to map and assess geospatial access to pharmacies within Baltimore, MD, neighborhoods with the highest rates of Chlamydia trachomatis (1180.25-4255.31 per 100,000 persons). Expedited partner therapy knowledge and practices were collected via a telephone survey of pharmacists employed at retail pharmacies located in these same neighborhoods. Cost of antibiotic medication in US dollars was collected. Census tracts with the highest Chlamydia trachomatis incidence rates had lower median pharmacy density than other census tracts (26.9 per 100,000 vs 31.4 per 100,000, P barriers to implementing prescription-expedited partner therapy. Although most Baltimore pharmacists were unaware of expedited partner therapy, they were generally receptive to learning about and filling expedited partner therapy prescriptions. This finding suggests the need for wide dissemination of educational material targeted to pharmacists. In areas with limited geographic access to pharmacies, expedited partner therapy strategies that do not depend on partners physically accessing a pharmacy merit consideration. Copyright © 2018 Elsevier Inc. All rights reserved.

Filling gaps in visual motion for target capture

Directory of Open Access Journals (Sweden)

Gianfranco eBosco

2015-02-01

Full Text Available A remarkable challenge our brain must face constantly when interacting with the environment is represented by ambiguous and, at times, even missing sensory information. This is particularly compelling for visual information, being the main sensory system we rely upon to gather cues about the external world. It is not uncommon, for example, that objects catching our attention may disappear temporarily from view, occluded by visual obstacles in the foreground. Nevertheless, we are often able to keep our gaze on them throughout the occlusion or even catch them on the fly in the face of the transient lack of visual motion information. This implies that the brain can fill the gaps of missing sensory information by extrapolating the object motion through the occlusion. In recent years, much experimental evidence has been accumulated that both perceptual and motor processes exploit visual motion extrapolation mechanisms. Moreover, neurophysiological and neuroimaging studies have identified brain regions potentially involved in the predictive representation of the occluded target motion. Within this framework, ocular pursuit and manual interceptive behavior have proven to be useful experimental models for investigating visual extrapolation mechanisms. Studies in these fields have pointed out that visual motion extrapolation processes depend on manifold information related to short-term memory representations of the target motion before the occlusion, as well as to longer term representations derived from previous experience with the environment. We will review recent oculomotor and manual interception literature to provide up-to-date views on the neurophysiological underpinnings of visual motion extrapolation.

Filling gaps in visual motion for target capture

Science.gov (United States)

Bosco, Gianfranco; Delle Monache, Sergio; Gravano, Silvio; Indovina, Iole; La Scaleia, Barbara; Maffei, Vincenzo; Zago, Myrka; Lacquaniti, Francesco

2015-01-01

A remarkable challenge our brain must face constantly when interacting with the environment is represented by ambiguous and, at times, even missing sensory information. This is particularly compelling for visual information, being the main sensory system we rely upon to gather cues about the external world. It is not uncommon, for example, that objects catching our attention may disappear temporarily from view, occluded by visual obstacles in the foreground. Nevertheless, we are often able to keep our gaze on them throughout the occlusion or even catch them on the fly in the face of the transient lack of visual motion information. This implies that the brain can fill the gaps of missing sensory information by extrapolating the object motion through the occlusion. In recent years, much experimental evidence has been accumulated that both perceptual and motor processes exploit visual motion extrapolation mechanisms. Moreover, neurophysiological and neuroimaging studies have identified brain regions potentially involved in the predictive representation of the occluded target motion. Within this framework, ocular pursuit and manual interceptive behavior have proven to be useful experimental models for investigating visual extrapolation mechanisms. Studies in these fields have pointed out that visual motion extrapolation processes depend on manifold information related to short-term memory representations of the target motion before the occlusion, as well as to longer term representations derived from previous experience with the environment. We will review recent oculomotor and manual interception literature to provide up-to-date views on the neurophysiological underpinnings of visual motion extrapolation. PMID:25755637

Filling gaps in visual motion for target capture.

Science.gov (United States)

Bosco, Gianfranco; Monache, Sergio Delle; Gravano, Silvio; Indovina, Iole; La Scaleia, Barbara; Maffei, Vincenzo; Zago, Myrka; Lacquaniti, Francesco

2015-01-01

A remarkable challenge our brain must face constantly when interacting with the environment is represented by ambiguous and, at times, even missing sensory information. This is particularly compelling for visual information, being the main sensory system we rely upon to gather cues about the external world. It is not uncommon, for example, that objects catching our attention may disappear temporarily from view, occluded by visual obstacles in the foreground. Nevertheless, we are often able to keep our gaze on them throughout the occlusion or even catch them on the fly in the face of the transient lack of visual motion information. This implies that the brain can fill the gaps of missing sensory information by extrapolating the object motion through the occlusion. In recent years, much experimental evidence has been accumulated that both perceptual and motor processes exploit visual motion extrapolation mechanisms. Moreover, neurophysiological and neuroimaging studies have identified brain regions potentially involved in the predictive representation of the occluded target motion. Within this framework, ocular pursuit and manual interceptive behavior have proven to be useful experimental models for investigating visual extrapolation mechanisms. Studies in these fields have pointed out that visual motion extrapolation processes depend on manifold information related to short-term memory representations of the target motion before the occlusion, as well as to longer term representations derived from previous experience with the environment. We will review recent oculomotor and manual interception literature to provide up-to-date views on the neurophysiological underpinnings of visual motion extrapolation.

Presidential inability: Filling in the gaps.

Science.gov (United States)

Feerick, John D

2014-01-01

This article focuses on potential gaps caused by the absence from the Twenty-Fifth Amendment of provisions to deal with the disability of a Vice President and the omission from the statutory line of succession law of provisions comparable to Sections 3 and 4 of the Twenty-Fifth Amendment for when there is an able Vice President. The analysis offers a critical review of the latent ambiguities in the succession provision to the United States Constitution, noting problems that have arisen from the time of the Constitutional Convention, to John Tyler's accession to office, to numerous disability crises that presented themselves throughout the twentieth century, to the present day. As the world becomes more complex and threats to the presidency more common, continued examination of our succession structure and its adequacy for establishing clear and effective presidential succession provisions under a broad range of circumstances is of paramount concern. This article embraces this robust discussion by offering some suggestions for improving the system in a way that does not require a constitutional amendment. The first part of the analysis traces the events that have driven the development of the nation's succession procedures. The second part examines the inadequacies, or "gaps," that remain in the area of presidential inability, and the third part sets forth recommendations for resolving these gaps.

High-etch-rate bottom-antireflective coating and gap-fill materials using dextrin derivatives in via first dual-Damascene lithography process

Science.gov (United States)

Takei, Satoshi; Sakaida, Yasushi; Shinjo, Tetsuya; Hashimoto, Keisuke; Nakajima, Yasuyuki

2008-03-01

The present paper describes a novel class of bottom antireflective coating (BARC) and gap fill materials using dextrin derivatives. The general trend of interconnect fabrication for such a high performance LSI is to apply cupper (Cu)/ low-dielectric-constant (low-k) interconnect to reduce RC delay. A via-first dual damascene process is one of the most promising processes to fabricate Cu/ low-k interconnect due to its wide miss-alignment margin. The sacrificial materials containing dextrin derivatives under resist for lithography were developed in via-first dual damascene process. The dextrin derivatives in this study was obtained by the esterification of the hydroxyl groups of dextrin resulting in improved solubility in the resist solvents such as propylene glycol monomethylether, propylene glycol monomethylether acetate, and ethyl lactate due to avoid the issue of defects that were caused by incompatability. The etch rate of our developed BARC and gap fill materials using dextrin derivatives was more than two times faster than one of the ArF resists evaluated in a CF4 gas condition using reactive ion etching. The improved etch performance was also verified by comparison with poly(hydroxystyrene), acrylate-type materials and latest low-k materials as a reference. In addition to superior etch performance, these materials showed good resist profiles and via filling performance without voids in via holes.

Filling in the Gaps: Conservation and Reconstruction of Archaeological Mail Armour

Directory of Open Access Journals (Sweden)

Martijn A Wijnhoven

2015-10-01

Full Text Available Mail armour is made of many interlinking metal rings. It has been a popular type of defensive gear through the centuries, and this popularity has in part been due to mail armour’s flexibility. However, this very flexibility today hinders its conservation, interpretation and display. Mail pieces retrieved from archaeological contexts are often in such poor state of preservation that their original shape is unrecognizable. This poses a challenge not only for conserving these artefacts, but also for understanding them. This paper describes a conservation technique for flexible mail that involves restoring preserved rings to their original position and filling in the remaining gaps with dummy rings. In addition to stabilizing the mesh of mail, this measure also aids the artefact’s interpretation. The advantages of using this method with archaeological specimens are presented by means of a case-study concerning the remains of a Roman mail coat found near Novae, Bulgaria. The case-study shows that the choice of conservation technique greatly influences the amount of information that researchers can obtain from this material.

Filling in biodiversity threat gaps

DEFF Research Database (Denmark)

Joppa, L. N.; O'Connor, Brian; Visconti, Piero

2016-01-01

increase to 10,000 times the background rate should species threatened with extinction succumb to pressures they face (4). Reversing these trends is a focus of the Convention on Biological Diversity's 2020 Strategic Plan for Biodiversity and its 20 Aichi Targets and is explicitly incorporated...... into the United Nations' 2030 Agenda for Sustainable Development and its 17 Sustainable Development Goals (SDGs). We identify major gaps in data available for assessing global biodiversity threats and suggest mechanisms for closing them....

GapBlaster-A Graphical Gap Filler for Prokaryote Genomes.

Directory of Open Access Journals (Sweden)

Pablo H C G de Sá

Full Text Available The advent of NGS (Next Generation Sequencing technologies has resulted in an exponential increase in the number of complete genomes available in biological databases. This advance has allowed the development of several computational tools enabling analyses of large amounts of data in each of the various steps, from processing and quality filtering to gap filling and manual curation. The tools developed for gap closure are very useful as they result in more complete genomes, which will influence downstream analyses of genomic plasticity and comparative genomics. However, the gap filling step remains a challenge for genome assembly, often requiring manual intervention. Here, we present GapBlaster, a graphical application to evaluate and close gaps. GapBlaster was developed via Java programming language. The software uses contigs obtained in the assembly of the genome to perform an alignment against a draft of the genome/scaffold, using BLAST or Mummer to close gaps. Then, all identified alignments of contigs that extend through the gaps in the draft sequence are presented to the user for further evaluation via the GapBlaster graphical interface. GapBlaster presents significant results compared to other similar software and has the advantage of offering a graphical interface for manual curation of the gaps. GapBlaster program, the user guide and the test datasets are freely available at https://sourceforge.net/projects/gapblaster2015/. It requires Sun JDK 8 and Blast or Mummer.

Testing the applicability of neural networks as a gap-filling method using CH₄ flux data from high latitude wetlands

DEFF Research Database (Denmark)

Dengel, S.; Zona, D.; Sachs, T.

2013-01-01

included representing the seasonal change and time of day. High Pearson correlation coefficients (r) of up to 0.97 achieved in the final analysis are indicative for the high performance of neural networks and their applicability as a gap-filling method for CH4 flux data time series. This novel approach...

The influence of gap to the mass flux

International Nuclear Information System (INIS)

Kim, S. K.; Kang, C. H.; Hwang, Y. S.

2000-01-01

It was known that the release of gap is very important for I-129, Cs, which have high solubility. According to the disposal concept of spent fuel, there is a little gap between fuel rods and a canister. There is a concept that this gap may be filled with sand or beads, but it is impossible to perfectly fill for this gap, so the gap is one of important parameter in release mechanism. In this paper, the influence of gap was carried out. Gap volume have a little influence in the early stage(within a year), but there is not to significantly affect after 1 year. We have to consider the influence of filling material in canister such as cast iron, which have not considered on this paper

A Gap-Filling Procedure for Hydrologic Data Based on Kalman Filtering and Expectation Maximization: Application to Data from the Wireless Sensor Networks of the Sierra Nevada

Science.gov (United States)

Coogan, A.; Avanzi, F.; Akella, R.; Conklin, M. H.; Bales, R. C.; Glaser, S. D.

2017-12-01

Automatic meteorological and snow stations provide large amounts of information at dense temporal resolution, but data quality is often compromised by noise and missing values. We present a new gap-filling and cleaning procedure for networks of these stations based on Kalman filtering and expectation maximization. Our method utilizes a multi-sensor, regime-switching Kalman filter to learn a latent process that captures dependencies between nearby stations and handles sharp changes in snowfall rate. Since the latent process is inferred using observations across working stations in the network, it can be used to fill in large data gaps for a malfunctioning station. The procedure was tested on meteorological and snow data from Wireless Sensor Networks (WSN) in the American River basin of the Sierra Nevada. Data include air temperature, relative humidity, and snow depth from dense networks of 10 to 12 stations within 1 km2 swaths. Both wet and dry water years have similar data issues. Data with artificially created gaps was used to quantify the method's performance. Our multi-sensor approach performs better than a single-sensor one, especially with large data gaps, as it learns and exploits the dominant underlying processes in snowpack at each site.

Mythic gaps

Directory of Open Access Journals (Sweden)

William Hansen

2014-11-01

Full Text Available Different kinds of omissions sometimes occur, or are perceived to occur, in traditional narratives and in tradition-inspired literature. A familiar instance is when a narrator realizes that he or she does not fully remember the story that he or she has begun to tell, and so leaves out part of it, which for listeners may possibly result in an unintelligible narrative. But many instances of narrative gap are not so obvious. From straightforward, objective gaps one can distinguish less-obvious subjective gaps: in many cases narrators do not leave out anything crucial or truly relevant from their exposition, and yet readers perceive gaps and take steps to fill them. The present paper considers four examples of subjective gaps drawn from ancient Greek literature (the Pandora myth, ancient Roman literature (the Pygmalion legend, ancient Hebrew literature (the Joseph legend, and early Christian literature (the Jesus legend. I consider the quite varied ways in which interpreters expand the inherited texts of these stories, such as by devising names, manufacturing motives, creating backstories, and in general filling in biographical ellipses. Finally, I suggest an explanation for the phenomenon of subjective gaps, arguing that, despite their variety, they have a single cause.

Radiating gap filler

International Nuclear Information System (INIS)

2009-01-01

Full text: In May, corrosion on the outside wall of the over 50 year old Canadian Chalk River reactor vessel caused a heavy water leak and the reactor was shut down triggering worldwide a nuclear medicine shortage. The reactor is also a major supplier of the isotope molybdenum-99 (Mo-99), a precursor of the medically widely used technetium-99 m . To fill the gap in demand, the Australian Nuclear Science and Technology Organisation has now arranged with US company Lantheus Medical Imaging, Inc., a world leader in medical imaging, to supply Mo-99. Subject to pending Australian regulatory processes, the deal is expected to assist in alleviating the world's current nuclear medicine shortage. As ANSTO is currently also the only global commercial supplier that produces Mo-99 from low enriched uranium (LEU) targets, Lantheus will be the first company bringing LEU derived Tc-99 m to the US market. To date, over 95% of Mo-99 is derived from highly enriched uranium (HEU) targets. However, there are concerns regarding proliferation risks associated with HEU targets and for commercial uses production from LEU targets would be desirable. ANSTO says that global Mo-99 supply chain is fragile and limited and it is working closely with nuclear safety and healthy regulators, both domestically and overseas, to expedite all necessary approvals to allow long-term production and export of medical isotopes.

Scientific results of the Second Gas Hydrate Drilling Expedition in the Ulleung Basin (UBGH2)

Science.gov (United States)

Ryu, Byong-Jae; Collett, Timothy S.; Riedel, Michael; Kim, Gil-Young; Chun, Jong-Hwa; Bahk, Jang-Jun; Lee, Joo Yong; Kim, Ji-Hoon; Yoo, Dong-Geun

2013-01-01

As a part of Korean National Gas Hydrate Program, the Second Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) was conducted from 9 July to 30 September, 2010 in the Ulleung Basin, East Sea, offshore Korea using the D/V Fugro Synergy. The UBGH2 was performed to understand the distribution of gas hydrates as required for a resource assessment and to find potential candidate sites suitable for a future offshore production test, especially targeting gas hydrate-bearing sand bodies in the basin. The UBGH2 sites were distributed across most of the basin and were selected to target mainly sand-rich turbidite deposits. The 84-day long expedition consisted of two phases. The first phase included logging-while-drilling/measurements-while-drilling (LWD/MWD) operations at 13 sites. During the second phase, sediment cores were collected from 18 holes at 10 of the 13 LWD/MWD sites. Wireline logging (WL) and vertical seismic profile (VSP) data were also acquired after coring operations at two of these 10 sites. In addition, seafloor visual observation, methane sensing, as well as push-coring and sampling using a Remotely Operated Vehicle (ROV) were conducted during both phases of the expedition. Recovered gas hydrates occurred either as pore-filling medium associated with discrete turbidite sand layers, or as fracture-filling veins and nodules in muddy sediments. Gas analyses indicated that the methane within the sampled gas hydrates is primarily of biogenic origin. This paper provides a summary of the operational and scientific results of the UBGH2 expedition as described in 24 papers that make up this special issue of the Journal of Marine and Petroleum Geology.

Fluid dynamics following flow shut-off in bottle filling

Science.gov (United States)

Thete, Sumeet; Appathurai, Santosh; Gao, Haijing; Basaran, Osman

2012-11-01

Bottle filling is ubiquitous in industry. Examples include filling of bottles with shampoos and cleaners, engine oil and pharmaceuticals. In these examples, fluid flows out of a nozzle to fill bottles in an assembly line. Once the required volume of fluid has flowed out of the nozzle, the flow is shut off. However, an evolving fluid thread or string may remain suspended from the nozzle following flow shut-off and persist. This stringing phenomenon can be detrimental to a bottle filling operation because it can adversely affect line speed and filling accuracy by causing uncertainty in fill volume, product loss and undesirable marring of the bottles' exterior surfaces. The dynamics of stringing are studied numerically primarily by using the 1D, slender-jet approximation of the flow equations. A novel feature entails development and use of a new boundary condition downstream of the nozzle exit to expedite the computations. While the emphasis is on stringing of Newtonian fluids and use of 1D approximations, results will also be presented for situations where (a) the fluids are non-Newtonian and (b) the full set of equations are solved without invoking the 1D approximation. Phase diagrams will be presented that identify conditions for which stringing can be problematic.

A morphological gap for Iberian Zospeum filled: Zospeum percostulatum sp. n. (Gastropoda, Eupulmonata, Carychiidae a new species from Asturias (Spain

Directory of Open Access Journals (Sweden)

Alvaro Alonso

2018-03-01

Full Text Available Zospeum percostulatum sp. n. from Cueva de La Herrería (Llanes, Asturias is described. It is characterized by a relatively large shell (1.4–1.8 mm height, conical, with ovate aperture, continuous peristome and thickened parietal callus; shell costulate except two first whorls; without any sort of inner formations. It is the first clearly costulate Iberian species, filling a morphological gap in the Iberian clade, and the largest species from the Cantabrian region, being the first species described from Asturias.

Gap-filling analysis of the iJO1366 Escherichia coli metabolic network reconstruction for discovery of metabolic functions

Directory of Open Access Journals (Sweden)

Orth Jeffrey D

2012-05-01

Full Text Available Abstract Background The iJO1366 reconstruction of the metabolic network of Escherichia coli is one of the most complete and accurate metabolic reconstructions available for any organism. Still, because our knowledge of even well-studied model organisms such as this one is incomplete, this network reconstruction contains gaps and possible errors. There are a total of 208 blocked metabolites in iJO1366, representing gaps in the network. Results A new model improvement workflow was developed to compare model based phenotypic predictions to experimental data to fill gaps and correct errors. A Keio Collection based dataset of E. coli gene essentiality was obtained from literature data and compared to model predictions. The SMILEY algorithm was then used to predict the most likely missing reactions in the reconstructed network, adding reactions from a KEGG based universal set of metabolic reactions. The feasibility of these putative reactions was determined by comparing updated versions of the model to the experimental dataset, and genes were predicted for the most feasible reactions. Conclusions Numerous improvements to the iJO1366 metabolic reconstruction were suggested by these analyses. Experiments were performed to verify several computational predictions, including a new mechanism for growth on myo-inositol. The other predictions made in this study should be experimentally verifiable by similar means. Validating all of the predictions made here represents a substantial but important undertaking.

Divergent NEE balances from manual-chamber CO2 fluxes linked to different measurement and gap-filling strategies: A source for uncertainty of estimated terrestrial C sources and sinks?

DEFF Research Database (Denmark)

Huth, Vytas; Vaidya, Shrijana; Hoffmann, Mathias

2017-01-01

Manual closed-chamber measurements are commonly used to quantify annual net CO2 ecosystem exchange (NEE) in a wide range of terrestrial ecosystems. However, differences in both the acquisition and gap filling of manual closed-chamber data are large in the existing literature, complicating inter...... measurements from sunrise to noon (sunrise approach) to capture a span of light conditions for measurements of NEE with transparent chambers. (2) The second level included three different methods of pooling measured ecosystem respiration (RECO) fluxes for empirical modeling of RECO: campaign-wise (19 single...... RECO fluxes (direct GPP modeling) or empirically modeled RECO fluxes from measured NEE fluxes (indirect GPP modeling). Measurements were made during 2013–2014 in a lucerne-clover-grass field in NE Germany. Across the different combinations of measurement and gap-filling options, the NEE balances...

Customized bentonite pellets. Manufacturing, performance and gap filling properties

Energy Technology Data Exchange (ETDEWEB)

Marjavaara, P.; Holt, E.; Sjoeblom, V. [VTT Technical Research Centre of Finland, Espoo (Finland)

2013-12-15

The goal of this work was to provide knowledge about how to manufacture customized bentonite pellets and how customized bentonite pellets perform in practice during the nuclear repository construction process. The project was mainly focused on laboratory experimental tests to optimize the pellet filling by customizing the raw materials and pellet manufacturing. Bentonite pellets were made using both extrusion and roller compaction methods. The pellets were intended for use in gaps between compacted bentonite and the rock walls in both buffer deposition holes and tunnel backfilling. Performance of different types of custom-made pellets were evaluated with regard to their ease of manufacturing, density, crush strength, abrasion resistance, water holding capacity, free swelling and also their thermal conductivity. These evaluations were done in both Finland (by VTT) and Canada (by AECL). Over 50 different varieties of pellets were roller-compaction manufactured at AECL in Canada and 20 types of extrusion pellets at VTT in Finland. The parameters that were varied during manufacturing included: bentonite raw material type, water content, pellet sizes, bentonite compaction machine parameters, use of recycled pellets, and addition of two different types of filler (illite or granitic sand) at varying addition percentages. By examining the pellets produced with these methods and materials the performance and behaviour of the bentonite pellets were evaluated in laboratory with selected tests. The work done using extrusion pellets showed that it was possible to manufacture pellets with higher water contents, up to 21 % from MX-80. This water content value was higher than what was typically possible using roller-compaction method in this study. Higher water content values allow closer compatibility with the designed bentonite buffer water content. The extrusion tests also showed that the required production simulation runs could be made successfully with reference type of MX

Expedition sol

DEFF Research Database (Denmark)

Jacobsen, Aase Roland

2006-01-01

Tag på expedition sol rundt i museet. Er der nogen, der har taget en bid af solen? Hvorfor bliver der solformørkelse? Kan vi undvære Solen?......Tag på expedition sol rundt i museet. Er der nogen, der har taget en bid af solen? Hvorfor bliver der solformørkelse? Kan vi undvære Solen?...

Long Chain Saturated and Unsaturated Carboxylic Acids: Filling a Large Gap of Knowledge in Their Enthalpies of Formation.

Science.gov (United States)

Rogers, Donald W; Zavitsas, Andreas A

2017-01-06

Despite their abundance in nature and their importance in biology, medicine, nutrition, and in industry, gas phase enthalpies of formation of many long chain saturated and unsaturated fatty acids and of dicarboxylic acids are either unavailable or have been estimated with large uncertainties. Available experimental values for stearic acid show a spread of 68 kJ mol -1 . This work fills the knowledge gap by obtaining reliable values by quantum theoretical calculations using G4 model chemistry. Compounds with up to 20 carbon atoms are treated. The theoretical results are in excellent agreement with well established experimental values when such values exist, and they provide a large number of previously unavailable values.

SEEMLA: 'Filling the gap' - The Future of bioenergy in the EU and the role of biomass from marginal lands

Science.gov (United States)

Baumgarten, Wibke; Kerckow, Birger

2017-04-01

The main objective of the H2020 funded EU project SEEMLA is the establishment of suitable innovative land-use strategies for a sustainable production of plant-based energy on marginal lands while improving general ecosystem services. In the context of the German Renewable Energy Sources Act (EEG, Erneuerbare Energien Gesetz) and the European Common Agricultural Policy (CAP) a concept should be developed with SEEMLA for a sustainable use of domestic biomass in order to be able to 'fill the gap' of the future demand in renewable resources as an energy source till 2050. The project partner countries are Italy, the Ukraine and Greece besides Germany.

Alloy spreading and filling of gaps in brazing of VDU-2 and KhN50VMTYuB heat resistant nickel alloys with VPr3K and VPr10 alloys

International Nuclear Information System (INIS)

Shapiro, A.E.; Podol'skij, B.A.; Lepisko, M.R.; Borzyak, A.G.; Moryakov, V.F.; Rostislavskaya, T.T.

1984-01-01

A study was made on contact interaction of VDU-2 and KhN50VMTYuB alloys with VPr3K and VPr10 alloys at 1325 and 1220 deg C in argon and industrial vacuum. The contact angles and wettability indexes were determined. The solders fill the vertical gaps of up to 0.25 mm width through 80 mm height. Spreading and filling of gaps proceeds better during soldering in argon with boron trifluoride addition as compared to soldering in industrial vacuum. VPr10 alloy is divided into two phases when wetting KhN50VMTYuB alloy: fusible one on the base of nickel-chromium-manganese solution and infusible one on the base of nickel-niobium eutectics. The square of fusible phase spreading is 2.5...3 times larger as compared to infusible one

Finite element modelling of the mechanics of discrete carbon nanotubes filled with ZnS and comparison with experimental observations

KAUST Repository

Monteiro, André O.; Da Costa, Pedro M. F. J.; Cachim, Paulo Barreto

2013-01-01

The mechanical response to a uniaxial compressive force of a single carbon nanotube (CNT) filled (or partially-filled) with ZnS has been modelled. A semi-empirical approach based on the finite element method was used whereby modelling outcomes were closely matched to experimental observations. This is the first example of the use of the continuum approach to model the mechanical behaviour of discrete filled CNTs. In contrast to more computationally demanding methods such as density functional theory or molecular dynamics, our approach provides a viable and expedite alternative to model the mechanics of filled multi-walled CNTs. © 2013 Springer Science+Business Media New York.

Finite element modelling of the mechanics of discrete carbon nanotubes filled with ZnS and comparison with experimental observations

KAUST Repository

Monteiro, André O.

2013-09-25

The mechanical response to a uniaxial compressive force of a single carbon nanotube (CNT) filled (or partially-filled) with ZnS has been modelled. A semi-empirical approach based on the finite element method was used whereby modelling outcomes were closely matched to experimental observations. This is the first example of the use of the continuum approach to model the mechanical behaviour of discrete filled CNTs. In contrast to more computationally demanding methods such as density functional theory or molecular dynamics, our approach provides a viable and expedite alternative to model the mechanics of filled multi-walled CNTs. © 2013 Springer Science+Business Media New York.

The CACAO Method for Smoothing, Gap Filling, and Characterizing Seasonal Anomalies in Satellite Time Series

Science.gov (United States)

Verger, Aleixandre; Baret, F.; Weiss, M.; Kandasamy, S.; Vermote, E.

2013-01-01

Consistent, continuous, and long time series of global biophysical variables derived from satellite data are required for global change research. A novel climatology fitting approach called CACAO (Consistent Adjustment of the Climatology to Actual Observations) is proposed to reduce noise and fill gaps in time series by scaling and shifting the seasonal climatological patterns to the actual observations. The shift and scale CACAO parameters adjusted for each season allow quantifying shifts in the timing of seasonal phenology and inter-annual variations in magnitude as compared to the average climatology. CACAO was assessed first over simulated daily Leaf Area Index (LAI) time series with varying fractions of missing data and noise. Then, performances were analyzed over actual satellite LAI products derived from AVHRR Long-Term Data Record for the 1981-2000 period over the BELMANIP2 globally representative sample of sites. Comparison with two widely used temporal filtering methods-the asymmetric Gaussian (AG) model and the Savitzky-Golay (SG) filter as implemented in TIMESAT-revealed that CACAO achieved better performances for smoothing AVHRR time series characterized by high level of noise and frequent missing observations. The resulting smoothed time series captures well the vegetation dynamics and shows no gaps as compared to the 50-60% of still missing data after AG or SG reconstructions. Results of simulation experiments as well as confrontation with actual AVHRR time series indicate that the proposed CACAO method is more robust to noise and missing data than AG and SG methods for phenology extraction.

Filling Knowledge Gaps for Mimivirus Entry, Uncoating, and Morphogenesis.

Science.gov (United States)

Andrade, Ana Cláudia Dos Santos Pereira; Rodrigues, Rodrigo Araújo Lima; Oliveira, Graziele Pereira; Andrade, Kétyllen Reis; Bonjardim, Cláudio Antônio; La Scola, Bernard; Kroon, Erna Geessien; Abrahão, Jônatas Santos

2017-11-15

Since the discovery of mimivirus, its unusual structural and genomic features have raised great interest in the study of its biology; however, many aspects concerning its replication cycle remain uncertain. In this study, extensive analyses of electron microscope images, as well as biological assay results, shed light on unclear points concerning the mimivirus replication cycle. We found that treatment with cytochalasin, a phagocytosis inhibitor, negatively impacted the incorporation of mimivirus particles by Acanthamoeba castellanii , causing a negative effect on viral growth in amoeba monolayers. Treatment of amoebas with bafilomicin significantly impacted mimivirus uncoating and replication. In conjunction with microscopic analyses, these data suggest that mimiviruses indeed depend on phagocytosis for entry into amoebas, and particle uncoating (and stargate opening) appears to be dependent on phagosome acidification. In-depth analyses of particle morphogenesis suggest that the mimivirus capsids are assembled from growing lamellar structures. Despite proposals from previous studies that genome acquisition occurs before the acquisition of fibrils, our results clearly demonstrate that the genome and fibrils can be acquired simultaneously. Our data suggest the existence of a specific area surrounding the core of the viral factory where particles acquire the surface fibrils. Furthermore, we reinforce the concept that defective particles can be formed even in the absence of virophages. Our work provides new information about unexplored steps in the life cycle of mimivirus. IMPORTANCE Investigating the viral life cycle is essential to a better understanding of virus biology. The combination of biological assays and microscopic images allows a clear view of the biological features of viruses. Since the discovery of mimivirus, many studies have been conducted to characterize its replication cycle, but many knowledge gaps remain to be filled. In this study, we conducted a

DEF: an automated dead-end filling approach based on quasi-endosymbiosis.

Science.gov (United States)

Liu, Lili; Zhang, Zijun; Sheng, Taotao; Chen, Ming

2017-02-01

Gap filling for the reconstruction of metabolic networks is to restore the connectivity of metabolites via finding high-confidence reactions that could be missed in target organism. Current methods for gap filling either fall into the network topology or have limited capability in finding missing reactions that are indirectly related to dead-end metabolites but of biological importance to the target model. We present an automated dead-end filling (DEF) approach, which is derived from the wisdom of endosymbiosis theory, to fill gaps by finding the most efficient dead-end utilization paths in a constructed quasi-endosymbiosis model. The recalls of reactions and dead ends of DEF reach around 73% and 86%, respectively. This method is capable of finding indirectly dead-end-related reactions with biological importance for the target organism and is applicable to any given metabolic model. In the E. coli iJR904 model, for instance, about 42% of the dead-end metabolites were fixed by our proposed method. DEF is publicly available at http://bis.zju.edu.cn/DEF/. mchen@zju.edu.cn Supplementary data are available at Bioinformatics online.

Vehicle Codes and Standards: Overview and Gap Analysis

Energy Technology Data Exchange (ETDEWEB)

Blake, C.; Buttner, W.; Rivkin, C.

2010-02-01

This report identifies gaps in vehicle codes and standards and recommends ways to fill the gaps, focusing on six alternative fuels: biodiesel, natural gas, electricity, ethanol, hydrogen, and propane.

Inoculation Expedition of Agar wood

International Nuclear Information System (INIS)

Peng, C.S.; Mohd Fajri Osman; Rusli Zakaria

2015-01-01

Inoculation expedition of agar wood is a main field works for researcher in Nuclear Malaysia to prove the real inoculation of agar wood in real jungle. These expeditions was conducted fourth times in the jungles of Malaysia including Gunung Tebu in Terengganu, Murum in Belaga, Sarawak, Kampung Timbang in Kota Belud, Sabah and Nuclear Malaysia itself. This expedition starts from preparation of samples and equipment, transportation into the jungle, searching and recognition of agar wood and lastly, inoculation of the agar wood. Safety aspects precedence set out in the preparation and implementation of this expedition. (author)

Filling the gap between disaster preparedness and response networks of urban emergency management: Following the 2013 Seoul Floods.

Science.gov (United States)

Song, Minsun; Jung, Kyujin

2015-01-01

To examine the gap between disaster preparedness and response networks following the 2013 Seoul Floods in which the rapid transmission of disaster information and resources was impeded by severe changes of interorganizational collaboration networks. This research uses the 2013 Seoul Emergency Management Survey data that were collected before and after the floods, and total 94 organizations involving in coping with the floods were analyzed in bootstrap independent-sample t-test and social network analysis through UCINET 6 and STATA 12. The findings show that despite the primary network form that is more hierarchical, horizontal collaboration has been relatively invigorated in actual response. Also, interorganizational collaboration networks for response operations seem to be more flexible grounded on improvisation to coping with unexpected victims and damages. Local organizations under urban emergency management are recommended to tightly build a strong commitment for joint response operations through full-size exercises at the metropolitan level before a catastrophic event. Also, interorganizational emergency management networks need to be restructured by reflecting the actual response networks to reduce collaboration risk during a disaster. This research presents a critical insight into inverse thinking of the view designing urban emergency management networks and provides original evidences for filling the gap between previously coordinated networks for disaster preparedness and practical response operations after a disaster.

Antarctic Starfish (Echinodermata, Asteroidea) from the ANDEEP3 expedition.

Science.gov (United States)

Danis, Bruno; Jangoux, Michel; Wilmes, Jennifer

2012-01-01

species, newly reported in the Southern Ocean.The quality of the data was controlled very thoroughly, by means of on-board Polarstern GPS systems, checking of identification by a renowned specialist (Prof. Michel Jangoux, Université Libre de Bruxelles), and matching to the Register of Antarctic Marine Species (RAMS) and World Register of Marine Species (WoRMS). The data is therefore fit for completing checklists, for inclusion in biodiversity patterns analysis, or niche modeling. It also nicely fills an information gap regarding deep-sea starfish from the Southern Ocean, for which data is very scarce at this time. The authors may be contacted if any additional information is needed before carrying out detailed biodiversity or biogeographic studies.

Impurity in a Luttinger liquid away from half-filling: A numerical study

International Nuclear Information System (INIS)

Shaojin Qin; Lu Yu; Fabrizio, M.; Oshikawa, M.; Affleck, I.

1997-07-01

Conformal field theory gives quite detailed predictions for the low energy spectrum and scaling exponents of a massless Luttinger liquid at generic filling in the presence of an impurity. While these predictions were verified for half-filled systems, there was till now no analysis away from this particular filling. Here, we fill in this gap by numerically investigating a quarter-filled system using the density matrix renormalization group technique. Our results confirm conformal field theory predictions, and suggest that they are indeed valid for arbitrary fillings. (author). 21 refs, 8 figs, 4 tabs

Payee's Guide for the Grant Administration and Payment System (GAPS).

Science.gov (United States)

Department of Education, Washington, DC. Office of the Chief Financial and Chief Information Officer.

Information that payees need for program operation, as well as guidelines for grants and contracts paid through the Grant Administration and Payment System (GAPS), is provided in this guide. The guide is intended to help users understand their responsibilities in expediting payments, in completing forms and reports, and in controlling federal cash…

Galvanostatic bottom-up filling of TSV-like trenches: Choline-based leveler containing two quaternary ammoniums

International Nuclear Information System (INIS)

Kim, Myung Jun; Seo, Youngran; Kim, Hoe Chul; Lee, Yoonjae; Choe, Seunghoe; Kim, Young Gyu; Cho, Sung Ki; Kim, Jae Jeong

2015-01-01

Highlights: • The choline-based leveler having two quaternary ammoniums was synthesized. • The adsorption of this leveler with suppressor and accelerator was examined. • Galvanostatic Cu bottom-up filling was achieved with three-additive system. • The mechanism of gap-filling was elucidated based on the additive adsorption. - Abstract: Through Silicon Via (TSV) technology is essential to accomplish 3-dimensional packaging of electronics. Hence, more reliable and faster TSV filling by Cu electrodeposition is required. Our approach to improve Cu gap-filling in TSV is based on the development of new organic additives for feature filling. Here, we introduce our achievements from the synthesis of choline-based leveler to the feature filling using a synthesized leveler. The choline-based leveler, which includes two quaternary ammoniums at both ends of the molecule, is synthesized from glutaric acid. The characteristics of the choline-based additive are examined by the electrochemical analyses, and it is confirmed that the choline-based leveler shows a convection dependent adsorption behavior, which is essential for leveling. The interactions between the polymeric suppressor, accelerator, and the choline-based leveler are also investigated by changing the convection condition. Using the combination of suppressor, accelerator, and the choline-based leveler, the extreme bottom-up filling of Cu at trenches with dimensions similar to TSV are fulfilled. The mechanism of Cu gap-filling is demonstrated based on the results of electrochemical analyses and feature filling

A network of Pediatric Environmental Health Specialty Units (PEHSUs: Filling a critical gap in the health care system

Directory of Open Access Journals (Sweden)

Christine M. Zachek

2012-09-01

Full Text Available A network of pediatric environmental health specialty units (PEHSUs in the United States was formed in 1998 out of a recognized need for clinical expertise in children’s environmental health. Documented trends in a rise of pediatric diseases caused or exacerbated by environmental conditions, coupled with the failure of medical schools and residency programs to cover these issues in a significant way, leaves health care providers, parents, communities, and governments at a loss for this specialized knowledge. The PEHSUs fill this gap by providing: 1 medical education, 2 general outreach and communications, and 3 consultative services to communities and health care professionals. This paper presents examples of key situations where PEHSU involvement was instrumental in improved patient outcomes or advancing clinical expertise in children’s environmental health. Challenges and opportunities for future directions for the program are also discussed.

Polonium-210 and other radionuclides in terrestrial, freshwater and brackish environments Results from the NKS project GAPRAD (Filling knowledge gaps in radiation protection methodologies for non-human biota)

Energy Technology Data Exchange (ETDEWEB)

Gjelsvik, R; Brown, J; Holm, E; Roos, P; Saxen, R; Outola, I

2012-01-15

The background and rationale to filling knowledge gaps in radiation protection methodologies for biota are presented. Concentrations of Po-210 and Pb-210 are reported for biota sampled in Dovrefjell, Norway and selected lake and brackish ecosystems in Finland. Furthermore, details in relation to Po-210 uptake and biokinetics in humans based on experimental studies are recounted. (Author)

Polonium-210 and other radionuclides in terrestrial, freshwater and brackish environments Results from the NKS project GAPRAD (Filling knowledge gaps in radiation protection methodologies for non-human biota)

International Nuclear Information System (INIS)

Gjelsvik, R.; Brown, J.; Holm, E.; Roos, P.; Saxen, R.; Outola, I.

2012-01-01

The background and rationale to filling knowledge gaps in radiation protection methodologies for biota are presented. Concentrations of Po-210 and Pb-210 are reported for biota sampled in Dovrefjell, Norway and selected lake and brackish ecosystems in Finland. Furthermore, details in relation to Po-210 uptake and biokinetics in humans based on experimental studies are recounted. (Author)

21 CFR 1401.6 - Expedited process.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Expedited process. 1401.6 Section 1401.6 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY PUBLIC AVAILABILITY OF INFORMATION § 1401.6 Expedited process. (a) Requests and appeals will be given expedited treatment whenever ONDCP determines either: (1...

Observing Crustal Magnetic Anomalies in Remote Ocean Regions: Filling in the Gaps

Science.gov (United States)

Claus, B.; Kinsey, J. C.; Tominaga, M.; Tivey, M.

2016-12-01

The use of long duration ocean observing platforms is necessary for filling in broad gaps in the observational record of magnetic anomaly measurements in the ocean basins -- observations that are necessary for understanding a variety of geophysical processes. Such an instrument would need to gather 1000s of kilometers of magnetic data untended, requiring in-situ calibration methods and minimization of energy usage. In this work an autonomous underwater glider (AUG) has been equipped with a low power flux-gate magnetic sensor. Sensor integration was tested locally in shallow water followed by deep water trials to verify the calibration procedure in June of 2016. During this cruise a 160 kilometer magnetic tow was also collected across the East Coast Shelf Anomaly to the South-East of Cape Cod. Following these tests, the AUG was deployed such that it followed the trajectory of the towed magnetic survey to provide a baseline comparison against a known methodology. For these deployments an in-situ calibration procedure was used whereby the vehicle was commanded to perform descending and ascending spirals with its actuators at various discrete locations. When combined with a temperature model for the sensor the calibrated measurements were found to be in agreement with the towed data to within several 10's of nT. These comparative measurements demonstrate the utility of using directed long duration autonomous ocean observing platforms to gather medium wavelength crustal magnetic anomaly features. This ability is especially desirable for collecting measurements in remote ocean basins, such as the Southern Ocean, where presently only a few ship tracks exist and are likely to never be sampled by conventional research vessels surveys.

Filling gaps in PPAR-alpha signaling through comparative nutrigenomics analysis

Directory of Open Access Journals (Sweden)

Radonjic Marijana

2009-12-01

available expression data, exploiting the power of in silico analysis filtered by evolutionary conservation. The analysis enabled us to indicate potential gene candidates that could fill in the gaps with regards to the signalling of PPARα and, moreover, the non-random localization of the differentially expressed genes in the genome, suggest that epigenetic mechanisms are of importance in the regulation of the transcription operated by PPARα.

FILLING GAPS ONLINE - USE OF LEXICAL AND SEMANTIC INFORMATION IN SENTENCE PROCESSING

NARCIS (Netherlands)

STOWE, LA; TANENHAUS, MK; CARLSON, GN

1991-01-01

Two experiments investigated how people assign an interpretation to question phrases. In order to determine the meaning of the WH-phrase (e.g., who, what), a "gap" must be located and the role associated with the gap assigned to the WH-phrase. Two experiments tested the Lexical Expectation model of

The micro-gap resistive plate chamber

CERN Document Server

Cerron-Zeballos, E; Lamas-Valverde, J; Platner, E D; Roberts, J; Williams, M C S; Zichichi, A

1999-01-01

Previously we have found that the freon C/sub 2/F/sub 5/H has very good properties when used in a resistive plate chamber (RPC) with a single gap of 2 mm. In this paper we report on the performance of a multigap RPC consisting of 4 gaps of 0.8 mm filled with a gas mixture containing this freon. (7 refs).

7 CFR 1703.112 - Expedited telecommunications loans

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Expedited telecommunications loans 1703.112 Section... § 1703.112 Expedited telecommunications loans RUS will expedite consideration and determination of an application submitted by an RUS telecommunications borrower for a loan under the Act or an advance of such...

Stress and gas hydrate-filled fracture distribution, Krishna-Godavari Basin, India

Energy Technology Data Exchange (ETDEWEB)

Cook, A.; Goldberg, D. [Lamont-Doherty Earth Observatory of Columbia Univ., Palisades, NY (United States)

2008-07-01

The first expedition of the Indian National Gas Hydrate Program (NGHP) was launched in the summer of 2006 to characterize the presence of gas hydrates on the continental margins of India. This paper presented a study from the NGHP expedition that found high resistivity fractures in unconsolidated clay sediments on logging-while-drilling (LWD) borehole resistivity images. Gas hydrate-filled and conductive fractures appearing on LWD resistivity images in holes 5A, 5B, 6A, 7A and 10 were analysed and discussed. Fracture orientation and shallow sediment stress orientations were determined for each hole. The paper described how to determine which sections of a log are hydrate bearing as well as how to calculate the predicted water saturated resistivity. It was concluded that holes 5A, 5B, 6A and 7A contained well-ordered, high-angle fractures, from which horizontal stress directions could be accurately resolved. However, these stress directions, contradicted the orientations normally seen on a passive margin, and may be the result of local bathymetry variations. 6 refs., 1 tab., 11 figs.

Filling the gap between traditional Chinese medicine and modern medicine, are we heading to the right direction?

Science.gov (United States)

Chen, Xiuping; Pei, Lixia; Lu, Jinjian

2013-06-01

Traditional Chinese medicine (TCM), the ancient medicine popular in China and surrounding areas, has been recognized as a typical representative of complementary and alternative medicine. Over long period in clinical practice, especially the progress in basic research, data on the effectiveness and beneficial contribution of TCM herbs to public health and disease control have been accumulated while the quality of the evidence is generally poor. The most common clinical practice of TCM herbs is herb combination called formula which consists of several types of medicinal herbs or minerals, which is quite different from modern medicine. Definitely, tens of hundreds of compounds could be identified in even a small formula. With the regained enthusiasm on natural products based new drug R&D, the proposed multi-target drug discovery strategy, the booming of -omics technologies, and the implementation of ambitious plan of TCM modernization in China, attempts have been made to fill the gap between TCM herbs and modern drugs. However, are we heading to the right direction? Copyright © 2013 Elsevier Ltd. All rights reserved.

The 0.5-2.22 micrometer Scattered Light Spectrum of the Disk around TW Hya: Detection of a Partially Filled Disk Gap at 80 AU*

Science.gov (United States)

Debes, John H.; Jang-Condell, Hannah; Weinberger, Alycia J.; Roberge, Aki; Schneider, Glenn

2013-01-01

We present a 0.5-2.2 micrometer scattered light spectrum of the circumstellar disk around TW Hya from a combination of spatially resolved Hubble Space Telescope STIS spectroscopy and NICMOS coronagraphic images of the disk. We investigate the morphology of the disk at distances greater than 40 AU over this wide range of wavelengths, and identify the presence of a depression in surface brightness at approximately 80 AU that could be caused by a gap in the disk. Additionally, we quantify the surface brightness, azimuthal symmetry, and spectral character of the disk as a function of radius. Our analysis shows that the scattering efficiency of the dust is largely neutral to blue over the observed wavelengths. We model the disk as a steady a-disk with an ad hoc gap structure. The thermal properties of the disk are selfconsistently calculated using a three-dimensional radiative transfer code that uses ray tracing to model the heating of the disk interior and scattered light images. We find a good fit to the data over a wide range of distances from the star if we use a model disk with a partially filled gap of 30% depth at 80 AU and with a self-similar truncation knee at 100 AU. The origin of the gap is unclear, but it could arise from a transition in the nature of the disk's dust composition or the presence of a planetary companion. Based on scalings to previous hydrodynamic simulations of gap-opening criteria for embedded proto-planets, we estimate that a planetary companion forming the gap could have a mass between 6 and 28 solar mass.

MaNIDA: Integration of marine expedition information, data and publications: Data Portal of German Marine Research

Science.gov (United States)

Koppe, Roland; Scientific MaNIDA-Team

2013-04-01

The Marine Network for Integrated Data Access (MaNIDA) aims to build a sustainable e-infrastructure to support discovery and re-use of marine data from distinct data providers in Germany (see related abstracts in session ESSI 1.2). In order to provide users integrated access and retrieval of expedition or cruise metadata, data, services and publications as well as relationships among the various objects, we are developing (web) applications based on state of the art technologies: the Data Portal of German Marine Research. Since the German network of distributed content providers have distinct objectives and mandates for storing digital objects (e.g. long-term data preservation, near real time data, publication repositories), we have to cope with heterogeneous metadata in terms of syntax and semantic, data types and formats as well as access solutions. We have defined a set of core metadata elements which are common to our content providers and therefore useful for discovery and building relationships among objects. Existing catalogues for various types of vocabularies are being used to assure the mapping to community-wide used terms. We distinguish between expedition metadata and continuously harvestable metadata objects from distinct data providers. • Existing expedition metadata from distinct sources is integrated and validated in order to create an expedition metadata catalogue which is used as authoritative source for expedition-related content. The web application allows browsing by e.g. research vessel and date, exploring expeditions and research gaps by tracklines and viewing expedition details (begin/end, ports, platforms, chief scientists, events, etc.). Also expedition-related objects from harvesting are dynamically associated with expedition information and presented to the user. Hence we will provide web services to detailed expedition information. • Other harvestable content is separated into four categories: archived data and data products, near

Soviet Archaeological Expedition as a Research Object

Directory of Open Access Journals (Sweden)

Olga Sveshnikova

2011-11-01

Full Text Available Soviet archaeological expeditions are the main focus of my research. They provide us with very interesting examples of archaeological expeditions as a part of a society, and not only as a part of science. After the 1960s it was an especially popular leisure practice. Many people who were not professional archaeologists went on expeditions in their leisure time and worked there as diggers or shovelmen (excavators. A Soviet archaeologist described them as people who ‘prefer to spend their vacation in archaeological expeditions in various parts of our country instead of seaside resorts.

Experimental determination of thermal conductivity and gap conductance of fuel rod for HTGR

International Nuclear Information System (INIS)

Kikuchi, Teruo; Iwamoto, Kazumi; Ikawa, Katsuichi; Ishimoto, Kiyoshi

1985-01-01

The thermal conductivity of fuel compacts and the gap conductance between the fuel compact and the graphite sleeve in fuel rods for a high-temperature gas-cooled reactor (HTGR) were measured by the center heating method. These measurements were made as functions of volume percent particle loading and temperature for thermal conductivity and as functions of gap distance and gas composition for gap conductance. The thermal conductivity of fuel compacts decreases with increasing temperature and with increasing particle loading. The gap conductance increases with increasing temperature and decrease with increasing gap distance. A good gap conductance was observed with helium fill gas. It was seen that the gap conductance was dependent on the thermal conductivity of fill gas and conductance by radiation and could be neglected the conductance through solid-solid contact points of fuel compact and graphite sleeve. (author)

Study of a low-dose capsule filling process by dynamic and static tests for advanced process understanding.

Science.gov (United States)

Stranzinger, S; Faulhammer, E; Scheibelhofer, O; Calzolari, V; Biserni, S; Paudel, A; Khinast, J G

2018-04-05

Precise filling of capsules with doses in the mg-range requires a good understanding of the filling process. Therefore, we investigated the various process steps of the filling process by dynamic and static mode tests. Dynamic tests refer to filling of capsules in a regular laboratory dosator filling machine. Static tests were conducted using a novel filling system developed by us. Three grades of lactose excipients were filled into size 3 capsules with different dosing chamber lengths, nozzle diameters and powder bed heights, and, in the dynamic mode, with two filling speeds (500, 3000 caps/h). The influence of the gap at the bottom of the powder container on the fill weight and variability was assessed. Different gaps resulted in a change in fill weight in all materials, although in different ways. In all cases, the fill weight of highly cohesive Lactohale 220 increased when decreasing the gap. Furthermore, experiments with the stand-alone static test tool indicated that this very challenging powder could successfully be filled without any pre-compression in the range of 5 mg-20 mg with acceptable RSDs. This finding is of great importance since for very fine lactose powders high compression ratios (dosing-chamber-length-to-powder-bed height compression ratios) may result in jamming of the piston. Moreover, it shows that the static mode setup is suitable for studying fill weight and variability. Since cohesive powders, such as Lactohale 220, are hard to fill, we investigated the impact of vibration on the process. Interestingly, we found no correlation between the reported fill weight changes in dynamic mode at 3000 cph and static mode using similar vibration. However, we could show that vibrations during sampling in the static mode dramatically reduced fill weight variability. Overall, our results indicate that by fine-tuning instrumental settings even very challenging powders can be filled with a low-dose dosator capsule filling machine. This study is a

John Murray / MABAHISS expedition versus the International Indian Ocean Expedition (IIOE) in retrospect

Science.gov (United States)

Aleem, A. A.; Morcos, S. A.

In addition to its scientific achievements, the John Murray/Mabahiss Expedition was a unique experiment in technology transfer and it pioneered bilateral relations in the field of oceanography, at a time when the Law of the Sea was not even an embryonic concept. The Expedition will be remembered for its profound influence on the development of oceanography in Egypt, and subsequently in several Arab and African countries, as well as for its socio-economic impact in Egypt. The International Indian Ocean Expedition (IIOE) was an elaborate exercise involving both the most sophisticated developments in oceanography of the day and the full complexity of international relations which necessitated the scientific, coordinating and supporting mechanisms of SCOR, IOC and Unesco combined. Each exercise separated by 25 years represented a significant event in the development of oceanography. Each was a natural product of the prevailing state of the art and the international climate. Oceanography had made a quantum jump in technology in the intervening quarter of a century, which had put the cost of deep sea oceanography quite beyond the financial capabilities of many developing countries, an important factor to bear in mind when comparing the impact of the John Murray/Mabahiss Expedition on Egypt with that of the IIOE, on the Indian Ocean countries.

Mortality disparities among groups participating in an East Africa surveying expedition: the Herbert Henry Austin expedition of 1900-1901.

Science.gov (United States)

Imperato, Pascal James; Imperato, Gavin H; Imperato, Austin C

2013-10-01

In the late nineteenth and early twentieth centuries, a number of European expeditions traveled to the region of Lake Rudolf, now largely in northern Kenya. Although diverse in intent, many of these were undertaken in the interests of furthering colonial territorial claims. In 1900-1901, Major Herbert Henry Austin led a British expedition down to the lake from Khartoum in the north. Of the 62 African, Arab, and European members of this expedition, only 18 (29 %) arrived at its final destination at Lake Baringo in Kenya. Because of a confluence of adverse climatic, social, and political conditions, the expedition ran short of food supplies when it arrived at the northern end of the lake in April 1901. For the next 4 months, the members of the expedition struggled down the west side of the lake and beyond. The greatest mortality (91 %) occurred among the 32 African transport drivers who were the most marginally nourished at the outset of the trip. The lowest mortality among the Africans on the expedition (15 %) occurred among the members of the Tenth Sudanese Rifles Battalion, who had an excellent nutritional status at the start of the expedition. Major Austin himself suffered from severe scurvy with retinal hemorrhages which left him partially blind in his right eye. An analysis of the mortality rates among the groups that participated in this expedition was undertaken. This revealed that poor nutritional status at the start of the trip was predictive of death from starvation.

Looking for new emperor penguin colonies? Filling the gaps

Directory of Open Access Journals (Sweden)

André Ancel

2017-01-01

Our analysis highlights a fundamental requirement, that in order to predict how species might respond to regional climate change, we must better understand their biogeography and the factors that lead to their occupation of particular sites. Regarding emperor penguins, remote sensing should target the identified gaps apparently devoid of penguins in order to update the total number of colonies, to re-evaluate both the regional and global population of emperor penguins, and to gain a better understanding of their biogeography.

Filling the gap: Estimating physicochemical properties of the full array of polybrominated diphenyl ethers (PBDEs)

International Nuclear Information System (INIS)

Yue, Chaoyang; Li, Loretta Y.

2013-01-01

Physicochemical properties of PBDE congeners are important for modeling their transport, but data are often missing. The quantitative structure–property relationship (QSPR) approach is utilized to fill this gap. Individual research groups often report piecemeal properties through experimental measurements or estimation techniques, but these data seldom satisfy fundamental thermodynamic relationships because of errors. The data then lack internal consistency and cannot be used directly in environmental modeling. This paper critically reviews published experimental data to select the best QSPR models, which are then extended to all 209 PBDE congeners. Properties include aqueous solubility, vapor pressure, Henry's law constant, octanol–water partition coefficient and octanol–air partition coefficient. Their values are next adjusted to satisfy fundamental thermodynamic equations. The resulting values then take advantage of all measurements and provide quick references for modeling and PBDE-contaminated site assessment and remediation. PCBs are also compared with respect to their properties and estimation methods. -- Highlights: •Property data of PBDEs and reported experimental and estimation methods were reviewed. •Missing data were estimated for all 209 PBDEs based on selected methods. •All data were adjusted to meet thermodynamic constrains using a VisualBasic program. •The established database provides a quick reference for PBDE environmental modeling. -- Through careful selection of literature data, structure–property estimation and adjustment, key properties of 209 PBDE congeners are estimated with internal consistency

20 CFR 405.701 - Expedited appeals process-general.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Expedited appeals process-general. 405.701 Section 405.701 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405.701 Expedited...

Factors affecting marginal integrity of class II bulk-fill composite resin restorations

Science.gov (United States)

Savadi Oskoee, Siavash; Bahari, Mahmoud; Jafari Navimipour, Elmira; Ajami, Amir Ahmad; Ghiasvand, Negar; Savadi Oskoee, Ayda

2017-01-01

Background. Bulk-fill composite resins are a new type of resin-based composite resins, claimed to have the capacity to be placed in thick layers, up to 4 mm. This study was carried out to evaluate factors affecting gap formation in Cl II cavities restored using the bulk-fill technique. Methods. A total of 60 third molars were used in this study. Two Cl II cavities were prepared in each tooth, one on the mesial aspect 1 mm coronal to the CEJ and one on the distal aspect 1 mm apical to the CEJ. The teeth were divided into 4 groups: A: The cavities were restored using the bulk-fill technique with Filtek P90 composite resin and its adhesive system and light-cured with quartz tungsten halogen (QTH) light-curing unit. B: The cavities were restored similar to that in group A but light-cured with an LED light-curing unit. C: The cavities were restored using the bulk-fill technique with X-tra Fil composite resin and Clearfil SE Bond adhesive system and light-cured with a QTH curing unit. D: The cavities were restored similar to that in group C but light-cured with an LED light-curing unit. The gaps were examined under a stereomicroscope at ×60. Data were analyzed with General Linear Model test. In cases of statistical significance (Pcomposite resin type and margin location (Pcomposite resin type were not significant; however, the cumulative effect of composite rein type*gingival margin was significant (P=0.04) Conclusion. X-tra Fil composite exhibited smaller gaps compared with Filtek P90 composite with both light-curing units. Both composite resins exhibited smaller gaps at enamel margins. PMID:28748051

THE 0.5-2.22 μm SCATTERED LIGHT SPECTRUM OF THE DISK AROUND TW Hya: DETECTION OF A PARTIALLY FILLED DISK GAP AT 80 AU

International Nuclear Information System (INIS)

Debes, John H.; Jang-Condell, Hannah; Weinberger, Alycia J.; Roberge, Aki; Schneider, Glenn

2013-01-01

We present a 0.5-2.2 μm scattered light spectrum of the circumstellar disk around TW Hya from a combination of spatially resolved Hubble Space Telescope STIS spectroscopy and NICMOS coronagraphic images of the disk. We investigate the morphology of the disk at distances >40 AU over this wide range of wavelengths, and identify the presence of a depression in surface brightness at ∼80 AU that could be caused by a gap in the disk. Additionally, we quantify the surface brightness, azimuthal symmetry, and spectral character of the disk as a function of radius. Our analysis shows that the scattering efficiency of the dust is largely neutral to blue over the observed wavelengths. We model the disk as a steady α-disk with an ad hoc gap structure. The thermal properties of the disk are self-consistently calculated using a three-dimensional radiative transfer code that uses ray tracing to model the heating of the disk interior and scattered light images. We find a good fit to the data over a wide range of distances from the star if we use a model disk with a partially filled gap of 30% depth at 80 AU and with a self-similar truncation knee at 100 AU. The origin of the gap is unclear, but it could arise from a transition in the nature of the disk's dust composition or the presence of a planetary companion. Based on scalings to previous hydrodynamic simulations of gap-opening criteria for embedded proto-planets, we estimate that a planetary companion forming the gap could have a mass between 6 and 28 M ⊕ .

Expedition medicine: A southern African perspective

African Journals Online (AJOL)

adventure tourists with adequate financial means. ... made wilderness expeditions much safer, they have not been able ... to space – the unifying characteristics of expedition medicine remain ... 4 Department of Paediatrics and Child Health, Faculty of Health Sciences, University of Cape Town, ... Therefore, while learning.

Characterization of Fractures in the Chicxulub Peak Ring: Preliminary Results from IODP/ICDP Expedition 364

Science.gov (United States)

McCall, N.; Gulick, S. P. S.; Morgan, J. V.; Hall, B. J.; Jones, L.; Expedition 364 Science Party, I. I.

2017-12-01

During Expedition 364, IODP/ICDP drilled the peak ring of the Chicxulub impact crater at Site M0077, recovering core from 505.7 to 1334.7 mbsf. The core has been imaged via X-ray Computer Tomography (CT) as a noninvasive method to create a 3-dimensional model of the core, providing information on the density and internal structure at a 0.3 mm resolution. Results from the expedition show that from 748 mbsf and deeper the peak ring is largely composed of uplifted and fractured granitic basement rocks originally sourced from approximately 8-10 km depth. Impact crater modeling suggests the peak ring was formed through dynamic collapse of a rebounding central peak within 10 minutes of impact, requiring the target rocks to temporarily behave as a viscous fluid. The newly recovered core provides a rare opportunity to investigate the cratering process, specifically how the granite was weakened, as well as the extent of the hydrothermal system created after the impact. Based on the CT data, we identify four classes of fractures based on their CT facies deforming the granitoids: pervasive fine fractures, discrete fine fractures, discrete filled fractures, and discrete open fractures. Pervasive fine fractures were most commonly found proximal to dikes and impact melt rock. Discrete filled fractures often displayed a cataclastic texture. We present density trends for the different facies and compare these to petrophysical properties (density, NGR, P-wave seismic velocity). Fractured areas have a lower density than the surrounding granite, as do most filled fractures. This reduction suggests that fluid migrating through the peak ring in the wake of the impact either deposited lower density minerals within the fractures and/or altered the original fracture fill. The extent and duration of fluid flow recorded in these fractures will assist in the characterization of the post-impact hydrothermal system. Future work includes combining information from CT images with thin sections

20 CFR 405.725 - Effect of expedited appeals process agreement.

Science.gov (United States)

2010-04-01

... PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405.725 Effect of expedited appeals process agreement. After an expedited appeals process agreement is... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Effect of expedited appeals process agreement...

28 CFR 51.34 - Expedited consideration.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Expedited consideration. 51.34 Section 51... consideration. (a) When a submitting authority is required under State law or local ordinance or otherwise finds... the submission be given expedited consideration. The submission should explain why such consideration...

Improving Oncology Quality Measurement in Accountable Care: Filling Gaps with Cross-Cutting Measures.

Science.gov (United States)

Valuck, Tom; Blaisdell, David; Dugan, Donna P; Westrich, Kimberly; Dubois, Robert W; Miller, Robert S; McClellan, Mark

2017-02-01

Payment for health care services, including oncology services, is shifting from volume-based fee-for-service to value-based accountable care. The objective of accountable care is to support providers with flexibility and resources to reform care delivery, accompanied by accountability for maintaining or improving outcomes while lowering costs. These changes depend on health care payers, systems, physicians, and patients having meaningful measures to assess care delivery and outcomes and to balance financial incentives for lowering costs while providing greater value. Gaps in accountable care measure sets may cause missed signals of problems in care and missed opportunities for improvement. Measures to balance financial incentives may be particularly important for oncology, where high cost and increasingly targeted diagnostics and therapeutics intersect with the highly complex and heterogeneous needs and preferences of cancer patients. Moreover, the concept of value in cancer care, defined as the measure of outcomes achieved per costs incurred, is rarely incorporated into performance measurement. This article analyzes gaps in oncology measures in accountable care, discusses challenging measurement issues, and offers strategies for improving oncology measurement. Discern Health analyzed gaps in accountable care measure sets for 10 cancer conditions that were selected based on incidence and prevalence; impact on cost and mortality; a diverse range of high-cost diagnostic procedures and treatment modalities (e.g., genomic tumor testing, molecularly targeted therapies, and stereotactic radiotherapy); and disparities or performance gaps in patient care. We identified gaps by comparing accountable care set measures with high-priority measurement opportunities derived from practice guidelines developed by the National Comprehensive Cancer Network and other oncology specialty societies. We found significant gaps in accountable care measure sets across all 10 conditions. For

Analysis of photonic band gap in novel piezoelectric photonic crystal

Science.gov (United States)

Malar Kodi, A.; Doni Pon, V.; Joseph Wilson, K. S.

2018-03-01

The transmission properties of one-dimensional novel photonic crystal having silver-doped novel piezoelectric superlattice and air as the two constituent layers have been investigated by means of transfer matrix method. By changing the appropriate thickness of the layers and filling factor of nanocomposite system, the variation in the photonic band gap can be studied. It is found that the photonic band gap increases with the filling factor of the metal nanocomposite and with the thickness of the layer. These structures possess unique characteristics enabling one to operate as optical waveguides, selective filters, optical switches, integrated piezoelectric microactuators, etc.

Tunneling Spectroscopy of the Energy Gap in MgB2 Under Magnetic Fields

International Nuclear Information System (INIS)

Ekino, T.; Takasaki, T.; Fujii, H.; Muranaka, T.; Akimitsu, J.

2003-01-01

Effects of magnetic field on the multiple-gap structure in the superconductor MgB 2 have been studied by break junctions. With increasing the field, the gap value decreases with filling up of the states inside of the gap. The gap-closing field B c correlates with the gap size. The extrapolated B c value for the larger gap is almost consistent with the upper critical field of this compound. (author)

Growth attributes – closing the GAP in Family-SMEs

DEFF Research Database (Denmark)

Brink, Tove; Neville, Mette

-sized Enterprises (SMEs)” to enhance the growth opportunities present in the EU SMEs. Most initiatives focus on creating better framework conditions for SMEs. However, research shows that growth is hampered by a number of internal factors. Many SMEs often lack the important internal attributes for growth pointed...... out in theory and empirical studies, which means that there is a gap between theory and practice when it comes to growth attributes in SMEs. This paper provides an enhanced understanding of whether gap-filling between theory and practice in family-SMEs is possible and whether gap-filling will actually...... stimulate growth. The findings are based on a large-scale research project involving 24 Danish family-SMEs, which completed a learning and development process over a period of three years. The aim of the project was to examine whether such a process which focused on a combination of some of the most...

Climate Forcing Datasets for Agricultural Modeling: Merged Products for Gap-Filling and Historical Climate Series Estimation

Science.gov (United States)

Ruane, Alex C.; Goldberg, Richard; Chryssanthacopoulos, James

2014-01-01

The AgMERRA and AgCFSR climate forcing datasets provide daily, high-resolution, continuous, meteorological series over the 1980-2010 period designed for applications examining the agricultural impacts of climate variability and climate change. These datasets combine daily resolution data from retrospective analyses (the Modern-Era Retrospective Analysis for Research and Applications, MERRA, and the Climate Forecast System Reanalysis, CFSR) with in situ and remotely-sensed observational datasets for temperature, precipitation, and solar radiation, leading to substantial reductions in bias in comparison to a network of 2324 agricultural-region stations from the Hadley Integrated Surface Dataset (HadISD). Results compare favorably against the original reanalyses as well as the leading climate forcing datasets (Princeton, WFD, WFD-EI, and GRASP), and AgMERRA distinguishes itself with substantially improved representation of daily precipitation distributions and extreme events owing to its use of the MERRA-Land dataset. These datasets also peg relative humidity to the maximum temperature time of day, allowing for more accurate representation of the diurnal cycle of near-surface moisture in agricultural models. AgMERRA and AgCFSR enable a number of ongoing investigations in the Agricultural Model Intercomparison and Improvement Project (AgMIP) and related research networks, and may be used to fill gaps in historical observations as well as a basis for the generation of future climate scenarios.

Kon-Tiki2 Expedition 2015-2016 Scientific Cruise Report

OpenAIRE

De La Torre Olazabal, Pedro Roberto; Mauritzen, Cecilie; Higraff, Torgeir; Wium Lie, Håkon

2017-01-01

The Kon-Tiki2 Expedition was partly an anthropogenic exploration and partly an interdisciplinary oceanic and atmospheric research expedition. As a research expedition it was unique for three reasons: 1) The type of vessel used, 2) the timing of the expedition, and 3) the geographical location. The scientific program was run onboard the ancient design balsa rafts, powered by solar power only, with almost no possibility of stopping the raft, during a year with the strongest El Niño recorded in ...

Inferred residual gaps for IFA-527 rods, compared to PIE measurements

International Nuclear Information System (INIS)

Lanning, D.D.

1983-05-01

The NRC-sponsored assembly IFA-527 contained six xenon-filled rods, each instrumented with fuel thermocouples at each end. Five of the six rods contained stable UO 2 fuel pellets with a fabricated diametral gap size of 230 microns. The rods were unique among instrumented test rods in that their lifetime peak powers were quite low (less than 20 kW/m). The assembly was removed at low exposure (about 2 MWd/kgM) due to pressure seal failures. The prefailure measured fuel temperatures in the five identical rods were quite similar, and indicated an effective fuel relocation of about 30 to 35 percent of the as-fabricated gap. Examination of rod cross sections in PIE, however, reveals virtually no reduction in the as-fabricated gap. In an attempt to reconcile these two observations, it is demonstrated that pellet eccentricity could account for the inferred effective relocation for these xenon-filled rods. That analysis is extended to an estimate of the proper effective relocation value for low-powered He-filled rods

A magnetically tunable non-Bragg defect mode in a corrugated waveguide filled with liquid crystals

Science.gov (United States)

Zhang, Lu; Fan, Ya-Xian; Liu, Huan; Han, Xu; Lu, Wen-Qiang; Tao, Zhi-Yong

2018-04-01

A magnetically tunable, non-Bragg defect mode (NBDM) was created in the terahertz frequency range by inserting a defect in the middle of a periodically corrugated waveguide filled with liquid crystals (LCs). In the periodic waveguide, non-Bragg gaps beyond the Bragg ones, which appear in the transmission spectra, are created by different transverse mode resonances. The transmission spectra of the waveguide containing a defect showed that a defect mode was present inside the non-Bragg gap. The NBDM has quite different features compared to the Bragg defect mode, which includes more complex, high-order guided wave modes. In our study, we filled the corrugated waveguide with LCs to realize the tunability of the NBDM. The simulated results showed that the NBDM in a corrugated waveguide filled with LCs can be used in filters, sensors, switches, and other terahertz integrated devices.

The gap detection test: can it be used to diagnose tinnitus?

NARCIS (Netherlands)

Boyen, Kris; Baskent, D.; van Dijk, P.

2015-01-01

Objectives: Animals with induced tinnitus showed difficulties in detecting silent gaps in sounds, suggesting that the tinnitus percept may be filling the gap. The main purpose of this study was to evaluate the applicability of this approach to detect tinnitus in human patients. The authors first

The Gap Detection Test : Can It Be Used to Diagnose Tinnitus?

NARCIS (Netherlands)

Boyen, Kris; Başkent, Deniz; van Dijk, Pim

2015-01-01

Objectives: Animals with induced tinnitus showed difficulties in detecting silent gaps in sounds, suggesting that the tinnitus percept may be filling the gap. The main purpose of this study was to evaluate the applicability of this approach to detect tinnitus in human patients. The authors first

The Russian-Swedish tundra radioecology expedition 1994

International Nuclear Information System (INIS)

Persson, B.R.; Holm, E.; Carlsson, K.Aa.; Josefsson, D.; Roos, P.

1995-01-01

The expedition investigated the ecology of the anthropogenic radio nuclides 137 Cs, 90 Sr, and 239,240 Pu in the Northern Sea to explain the origin from different sources. It had been shown from an earlier expedition that the levels of 137 Cs are higher in the central Arctic Ocean than further south in Barents Sea. The question was if this was due to inflow from the Atlantic or is due to other origin. The expedition also examined the outflow of 90 Sr from the rivers along the Siberian coast in order to investigate if the permafrost enhances the run-off of radionuclides from tundra. Study of anthropogenic radionuclides in the mixing zone between fresh and salt water at the different river systems along the Siberian coast was of particular interest. Some of the results from the expedition are presented in the present paper. 3 refs., 3 figs., 3 tabs

Comparative X-ray studies on the behaviour of amalgam and gold fillings at the margins in the approximal space as a function of time of residence

International Nuclear Information System (INIS)

Hansen, R.

1982-01-01

Within the framework of this thesis, X-ray pictures have been made of 430 gold or amalgam fillings in order to measure the gap between approximal cavity margin and filling margin. With amalgam fillings, the gap width measured after a residence time of half a year was 9.3 μm and widened to 136.9 μm after 8 years, which represents an increase to the 14-fold. The gap widths measured with gold inlays only doubled within this period, increasing from 38.8 μm after half a year to 77.4 μm after 8 years. The number of retention spots found in the approximal-cervical space with amalgam fillings was at least twice that found for gold fillings. From this it is concluded that gold inlays are by far the better solution for dental restorations. (orig./MG) [de

FILLING THE GAPS: SHAPING LIGHTING EDUCATION FOR THE FUTURE

DEFF Research Database (Denmark)

Bech-Larsen, Pernille; Linnebjerg, Sofie; Mullins, Michael Finbarr

This report forms part of the Lighting Metropolis research project. As one of the work packages under this project, the report investigates the current educational programmes in lighting related fields in Denmark and Sweden and relates these programmes to the employment needs for lighting compete...... competencies. Thus, its intention is to map the ‘gaps’ between current supply and demand of lighting related skills in the private, public and educational sectors, and to recommend areas in which these gaps can be reduced.......This report forms part of the Lighting Metropolis research project. As one of the work packages under this project, the report investigates the current educational programmes in lighting related fields in Denmark and Sweden and relates these programmes to the employment needs for lighting...

Established Osteoporosis and Gaps in the Management: Review ...

African Journals Online (AJOL)

Annals of Medical and Health Sciences Research | Mar-Apr 2014 | Vol 4 | Issue 2 |. Address for ... More efforts are needed to fill this large gap in the correct management of osteoporosis related fractures .... Systematic review: Comparative.

Results of the Lunar Exploration Analysis Group (LEAG) Gap Review: Specific Action Team (SAT), Examination of Strategic Knowledge Gaps (SKGs) for Human Exploration of the Moon

Science.gov (United States)

Shearer, C. K.; Eppler, D.; Farrell, W.; Gruener, J.; Lawrence, S.; Pellis, N.; Spudis, P. D.; Stopar, J.; Zeigler, R.; Neal, C;

20 CFR 405.720 - Notice of agreement to expedite appeal.

Science.gov (United States)

2010-04-01

....720 Section 405.720 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405.720 Notice of agreement to expedite appeal. If we agree that you can use the expedited appeals process...

Low noise wing slat system with rigid cove-filled slat

Science.gov (United States)

Shmilovich, Arvin (Inventor); Yadlin, Yoram (Inventor)

2013-01-01

Concepts and technologies described herein provide for a low noise aircraft wing slat system. According to one aspect of the disclosure provided herein, a cove-filled wing slat is used in conjunction with a moveable panel rotatably attached to the wing slat to provide a high lift system. The moveable panel rotates upward against the rear surface of the slat during deployment of the slat, and rotates downward to bridge a gap width between the stowed slat and the lower wing surface, completing the continuous outer mold line shape of the wing, when the cove-filled slat is retracted to the stowed position.

Expedition-8 Crew Members Portrait

Science.gov (United States)

2003-01-01

This is a portrait of the Expedition-8 two man crew. Pictured left is Cosmonaut Alexander Y, Kaleri, Soyuz Commander and flight engineer; and Michael C. Foale (right), Expedition-8 Mission Commander and NASA ISS Science Officer. The crew posed for this portrait while training at the Gagarin Cosmonaut Training Center in Star City, Russia. The two were launched for the International Space Station (ISS) aboard a Soyuz TMA-3 spacecraft from the Baikonur Cosmodrome, Kazakhstan, along with European Space Agency (ESA) Astronaut Pedro Duque of Spain, on October 18, 2003.

Genome size variation in Orchidaceae subfamily Apostasioideae: filling the phylogenetic gap

Czech Academy of Sciences Publication Activity Database

Jersáková, Jana; Trávníček, Pavel; Kubátová, B.; Krejčíková, Jana; Urfus, Tomáš; Liu, Z.-J.; Lamb, A.; Ponert, J.; Schulte, K.; Čurn, V.; Vrána, Jan; Leitch, I. J.; Suda, Jan

2013-01-01

Roč. 172, č. 1 (2013), s. 95-105 ISSN 0024-4074 R&D Projects: GA ČR GAP506/12/1320 Institutional support: RVO:67179843 ; RVO:67985939 ; RVO:61389030 Keywords : DNA base content * flow cytometry * nuclear C-value * phylogeny * orchids Subject RIV: EH - Ecology, Behaviour; EF - Botanics (BU-J); EF - Botanics (UEB-Q) Impact factor: 2.699, year: 2013

The 0.5-2.22 μm Scattered Light Spectrum of the Disk around TW Hya: Detection of a Partially Filled Disk Gap at 80 AU

Science.gov (United States)

Debes, John H.; Jang-Condell, Hannah; Weinberger, Alycia J.; Roberge, Aki; Schneider, Glenn

2013-07-01

We present a 0.5-2.2 μm scattered light spectrum of the circumstellar disk around TW Hya from a combination of spatially resolved Hubble Space Telescope STIS spectroscopy and NICMOS coronagraphic images of the disk. We investigate the morphology of the disk at distances >40 AU over this wide range of wavelengths, and identify the presence of a depression in surface brightness at ~80 AU that could be caused by a gap in the disk. Additionally, we quantify the surface brightness, azimuthal symmetry, and spectral character of the disk as a function of radius. Our analysis shows that the scattering efficiency of the dust is largely neutral to blue over the observed wavelengths. We model the disk as a steady α-disk with an ad hoc gap structure. The thermal properties of the disk are self-consistently calculated using a three-dimensional radiative transfer code that uses ray tracing to model the heating of the disk interior and scattered light images. We find a good fit to the data over a wide range of distances from the star if we use a model disk with a partially filled gap of 30% depth at 80 AU and with a self-similar truncation knee at 100 AU. The origin of the gap is unclear, but it could arise from a transition in the nature of the disk's dust composition or the presence of a planetary companion. Based on scalings to previous hydrodynamic simulations of gap-opening criteria for embedded proto-planets, we estimate that a planetary companion forming the gap could have a mass between 6 and 28 M ⊕. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with programs 10167, 8624, 7226, and 7233.

MV controlled spark gap

International Nuclear Information System (INIS)

Evdokimovich, V.M.; Evlampiev, S.B.; Korshunov, G.S.; Nikolaev, V.A.; Sviridov, Yu.F.; Khmyrov, V.V.

1980-01-01

A megavolt gas-filled trigatron gap with a sectional gas-discharge chamber having a more than three-fold range of operating voltages is described. The discharge chamber consists of ten sections, each 70 mm thick, made of organic glass. The sections are separated one from another by aluminium gradient rings to which ohmic voltage divider is connected. Insulational sections and gradient rings are braced between themselves by means of metal flanges through gaskets made of oil-resistant rubber with the help of fiberglass-laminate pins. The gap has two electrodes 110 mm in diameter. The trigatron ignition assembly uses a dielectric bushing projecting over the main electrode plane. Use has been made of a gas mixture containing 10% of SF 6 and 90% of air making possible to ensure stable gap operation without readjusting in the voltage range from 0.4 to 1.35 MV. The operation time lag in this range is equal to 10 μs at a spread of [ru

42 CFR 405.718 - Expedited appeals process.

Science.gov (United States)

2010-10-01

... Part A § 405.718 Expedited appeals process. (a) Conditions for use of expedited appeals process (EAP). A party may use the EAP to request court review in place of an administrative law judge (ALJ..., with the request for the EAP. (b) Content of the request for EAP. The request for the EAP: (1) Alleges...

42 CFR 405.853 - Expedited appeals process.

Science.gov (United States)

2010-10-01

....853 Expedited appeals process. (a) Conditions for use of expedited appeals process (EAP). A party may use the EAP set forth in § 405.718 of this chapter to request court review in place of the ALJ hearing... the request for an EAP. (b) Content of the request for EAP. The request for an EAP: (1) Alleges that...

Expedited patent examination for green inventions: Developing countries' policy choices

International Nuclear Information System (INIS)

Lu, Bingbin

2013-01-01

Innovation in green technology is important. Patent rights can provide incentives for green technology research and development. Expedited patent examination for green inventions has emerged as a policy instrument to provide such incentives. Developing countries were never opposed to patents for green technologies. China and Brazil have led the way by offering expedited examinations for green patent applications. More developing countries are expected to follow. Expedited examination for green technologies is consistent with the intellectual property system objectives and is justified by the clear social benefit from green technologies. Introducing such expedited programs in developing countries has sufficient advantages. Existing models of expedited programs for green technologies are analyzed to generalize key issues and to discern suitable policy choices for developing countries. When introducing such programs, a balanced definition for green technology is preferred; a special classification requirement is premature and is not recommended; a pre-examination search requirement is generally recommended to balance patent office workloads, and a green patent database is recommended. - Highlights: • There is no north–south divide in promoting green technologies. • Earlier issuance of green patents has its great social benefit. • Green patent application should receive expedited examination. • Developing countries should introduce such expedited programs. • A suitable approach for developing countries is searched and recommended

17 CFR 201.500 - Expedited consideration of proceedings.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Expedited consideration of proceedings. 201.500 Section 201.500 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Expedited consideration of proceedings. Consistent with the Commission's or the hearing officer's other...

Large band gaps of water waves through two-dimensional periodic topography

International Nuclear Information System (INIS)

Yang Shaohua; Wu Fugen; Zhong Huilin; Zhong Lanhua

2006-01-01

In this Letter, the band structures and band gaps of liquid surface waves propagating over two-dimensional periodic topography was investigated by plane-waves expansion method. The periodic topography drilled by square hollows with square lattice was considered. And the effects of the filling fraction and the orientation of bottom-hollows on the band gaps are investigated in detail

The ornithology of the Baudin expedition (1800-1804)

NARCIS (Netherlands)

Jansen, J.J.F.J.

2018-01-01

The expedition commanded by Nicolas Baudin to Tenerife, Mauritius, Australia, Timor and South Africa in 1800-1804 is fully researched in regard to ornithology. The expedition was government-funded and scientific equipped and had as one of the core activities collecting natural history items.

Exact Fill Rates for the (R, S) Inventory Control with Discrete Distributed Demands for the Backordering Case

OpenAIRE

Eugenia BABILONI; Ester GUIJARRO; Manuel CARDÓS; Sofía ESTELLÉS

2012-01-01

The fill rate is usually computed by using the traditional approach, which calculates it as the complement of the quotient between the expected unfulfilled demand and the expected demand per replenishment cycle, instead of directly the expected fraction of fulfilled demand. Furthermore the available methods to estimate the fill rate apply only under specific demand conditions. This paper shows the research gap regarding the estimation procedures to compute the fill rate and suggests: (i) a ne...

Gap-filling a spatially explicit plant trait database: comparing imputation methods and different levels of environmental information

Science.gov (United States)

Poyatos, Rafael; Sus, Oliver; Badiella, Llorenç; Mencuccini, Maurizio; Martínez-Vilalta, Jordi

2018-05-01

The ubiquity of missing data in plant trait databases may hinder trait-based analyses of ecological patterns and processes. Spatially explicit datasets with information on intraspecific trait variability are rare but offer great promise in improving our understanding of functional biogeography. At the same time, they offer specific challenges in terms of data imputation. Here we compare statistical imputation approaches, using varying levels of environmental information, for five plant traits (leaf biomass to sapwood area ratio, leaf nitrogen content, maximum tree height, leaf mass per area and wood density) in a spatially explicit plant trait dataset of temperate and Mediterranean tree species (Ecological and Forest Inventory of Catalonia, IEFC, dataset for Catalonia, north-east Iberian Peninsula, 31 900 km2). We simulated gaps at different missingness levels (10-80 %) in a complete trait matrix, and we used overall trait means, species means, k nearest neighbours (kNN), ordinary and regression kriging, and multivariate imputation using chained equations (MICE) to impute missing trait values. We assessed these methods in terms of their accuracy and of their ability to preserve trait distributions, multi-trait correlation structure and bivariate trait relationships. The relatively good performance of mean and species mean imputations in terms of accuracy masked a poor representation of trait distributions and multivariate trait structure. Species identity improved MICE imputations for all traits, whereas forest structure and topography improved imputations for some traits. No method performed best consistently for the five studied traits, but, considering all traits and performance metrics, MICE informed by relevant ecological variables gave the best results. However, at higher missingness (> 30 %), species mean imputations and regression kriging tended to outperform MICE for some traits. MICE informed by relevant ecological variables allowed us to fill the gaps in

8 CFR 287.10 - Expedited internal review process.

Science.gov (United States)

2010-01-01

... jurisdiction regarding criminal violations of law. [68 FR 35281, June 13, 2003] ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Expedited internal review process. 287.10... OFFICERS; POWERS AND DUTIES § 287.10 Expedited internal review process. (a) Violations of standards for...

Pectoralis Major Tear with Retracted Tendon: How to Fill the Gap? Reconstruction with Hamstring Autograft and Fixation with an Interference Screw

Directory of Open Access Journals (Sweden)

L. Baverel

2017-01-01

Full Text Available Rupture of the pectoralis major tendon is considered an uncommon injury and a significant number of ruptures are missed or diagnosed late, leading to a chronic tear. We report an open reconstruction technique and its outcomes in a case of chronic and retracted PM tear. At the last follow-up (12 months, the patient was pain-free, with a visual analogic scale at 0 all the time. He was very satisfied concerning the cosmetic and clinical results. The constant score was 93%, the SST value 95%, and the Quick DASH score 4.5. MRI performed one year postoperatively confirmed the continuity between PM tendon and graft, even if the aspect of the distal tendon seemed to be thinner than normal PM tendon. The excellent clinical outcomes at one-year follow-up suggest that PM tear with major tendon retraction can be reliably reconstructed with hamstring autograft, using a bioabsorbable screw to optimize the fixation device. This technique has proven its simplicity and efficiency to fill the gap.

Communicating polar sciences to school children through a scientific expedition

Science.gov (United States)

Lacarra, Maite; Lamarque, Gaelle; Koenig, Zoé; Bourgain, Pascaline; Mathilde Thierry, Anne

2015-04-01

APECS-France, the French national committee of the Association of Polar Early Career Scientists (APECS), was created in 2013 to improve the dissemination of polar sciences towards the general public and school children in particular, through activities developed in French for French schools. During the autumn of 2014, a young polar oceanographer from the University Pierre and Marie Curie, Zoé Koenig, participated in an expedition on board a sailing vessel in the Southern Ocean. APECS-France set up a new education and outreach project called "Zoé en Expé". Using different media, about 800 children, aged 6 to 12, and from 40 schools, were actively involved in the project. Interactions between Zoé and the students occurred before, during, and after the expedition, through a newsletter, a blog updated in real-time during the expedition, webinars (interactive video-conferences), and visits in classrooms when possible. Teachers were given a list of websites dedicated to polar and oceanographic science outreach and activities adapted to the age and level of the students were offered. Different activities were developed around the expedition, depending on teachers' objectives and children affinities. In particular, students were able to relate to the expedition by imagining a day in the life of Chippy, the mascot of the expedition. They were then asked to draw and/or write Chippy's adventures. APECS-France is now planning to edit a children's book using students' drawings as well as photographs taken during the expedition. Older students were also able to follow in real-time sensors released in the Southern Ocean by Zoé, measuring salinity and temperature. Throughout this 3-month project, children were able to study a wide range of topics (oceanography, biology, history, geography…). The expedition and the educational project allowed raising the awareness of children about the fragile and badly known Antarctic environment.

Filling the gap 115 years after Ronald Ross: the distribution of the Anopheles coluzzii and Anopheles gambiae s.s from Freetown and Monrovia, West Africa.

Directory of Open Access Journals (Sweden)

Dziedzom K de Souza

Full Text Available It was in Freetown, Sierra Leone, that the malaria mosquito Anopheles coastalis, now known as Anopheles gambiae, was first discovered as the vector of malaria, in 1899. That discovery led to a pioneering vector research in Sierra Leone and neighbouring Liberia, where mosquito species were extensively characterized. Unfortunately, the decade long civil conflicts of the 1990s, in both countries, resulted in a stagnation of the once vibrant research on disease vectors. This paper attempts to fill in some of the gaps on what is now known of the distribution of the sibling species of the An. gambiae complex, and especially the An. coluzzii and An. gambiae s.s, formerly known as the An. gambiae molecular M and S forms respectively, in the cities of Freetown and Monrovia.

Autologous orbicularis muscle for filling facial folds-an experimental and clinical study.

Science.gov (United States)

Schellini, Silvana Artioli; Hirai, Flavio Eduardo; Hoyama, Erika; Mattos, Maila Karina; Chaves, Fernando Rodrigo; Pellizon, Claudia Helena; Padovani, Carlos Roberto

2009-01-01

To present a technique for filling facial folds by using autologous orbicularis oculi muscle, based on an experimental model. two studies are presented: (1) an experimental study using 15 albino guinea-pigs from which a strip of the sural triceps muscle was removed and implanted in the subcutaneous tissue of the dorsal area. The animals were sacrificed 7, 30 and 60 days after the implantation, and the material was histologically evaluated. And (2) an interventional prospective clinical trial carried out on 20 patients referred to blepharoplasty surgery. They received autologous preseptal orbicularis muscle for filling facial folds. The results where evaluated by patients satisfaction and clinical exam. the sural tricep muscle, when implanted in the subcutaneous tissue, resulted in fibrosis. The patients whom received autologous orbicularis muscle implanted for filling facial folds showed that the procedure can be successfully carried out. autologous preseptal orbicularis muscle is a good material for filling facial folds. Cicatricial tissue will be formed on its implantation site, filling the tissue gap that forms the folds on the skin.

Early age sealing of buffer-rock gap by artificial wetting to induce bentonite swelling

International Nuclear Information System (INIS)

Holt, Erika; Marjavaara, Pieti

2012-01-01

Document available in extended abstract form only. The aim of this work is to study the homogeneous and rapid swelling of bentonite in the gap between the buffer blocks and the rock wall of the Olkiluoto disposal facility by artificial wetting. The focus was on the construction period of the deposition hole and buffer, and thus only the very early ages of the first weeks. In practice it is desirable that the bentonite material has a volume increase sufficient enough to prevent rock scaling while lowering the risks of bentonite piping and erosion due to potential water flow. This initial study was done in a small-scale mock-up in laboratory conditions. The small-scale steel mock-up had dimensions of 39 cm in height by 36 cm in diameter and included 12 pressure sensors, two displacement transducers, thermal couples, and pore water pressure measurements. The radial and axial pressure development was typically measured over a two week period to assess the rate and magnitude of sealing. A steel confining lid was used for simulating overpressure, though in some cases a plexiglass lid was used to take video images of the gap sealing. The buffer blocks were produced by isostatic compression of 100 MPa. The material was MX-80 Wyoming bentonite having a water content of approximately 13% and a dry density of 1890 kg/m 3 . The testing samples were dry sawn and core drilled from the large block and machined to their final dimensions. These were typically 30 x 30 cm, either as a solid block or three disks of 10 cm height each. The diameter was sometimes varied to allow for a change of gap width between 25 to 50 mm The study included various scenarios, such as: eccentric aligned blocks with gap sizes of 5 and 45 mm, free upward swelling or confinement, different types of pellet and granular gap filling, addition of water at varying rates, and longer term test duration. The samples were typically disassembled after two weeks. At this ending point, material assessments were done

Contact mechanics for poroelastic, fluid-filled media, with application to cartilage.

Science.gov (United States)

Persson, B N J

2016-12-21

I study a simple contact mechanics model for a poroelastic, fluid-filled solid squeezed against a rigid, randomly rough substrate. I study how the fluid is squeezed out from the interface, and how the area of contact, and the average interfacial separation, change with time. I present numerical results relevant for a human cartilage. I show that for a fluid filled poroelastic solid the probability of cavitation (and the related wear as the cavities implode), and dynamical scraping (defined below and in Hutt and Persson, J. Chem. Phys. 144, 124903 (2016)), may be suppressed by fluid flow from the poroelastic solid into the (roughness induced) interfacial gap between the solids.

Experience Catalysts: How They Fill the Acquisition Experience Gap for the DoD

Science.gov (United States)

2012-01-01

Russ- Eft , 1997). Other studies have shown that “the more managers are trained in how to support and coach the skills their employees learn, the more...efficacy, age, etc. (Bassi and Russ- Eft , 1997). Making a deterministic forecast is difficult. Experience Catalysts: How They Fill the Acquisition... tap freely. Provide easy access to sources of expertise. It deepens their knowledge base, expands per- spectives, and fuels their experience engine

20 CFR 405.715 - Agreement in expedited appeals process.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Agreement in expedited appeals process. 405.715 Section 405.715 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405...

Engaging Students with Gaps: The Whale and the Cigar.

Science.gov (United States)

Fowler, Lois Josephs; Pesante, Linda Hutz

1989-01-01

Shows how to help students fill in textual "gaps" to interact more fully with contemporary texts, classics, and myths. Presents examples of this approach for studying (1) Shakespeare's "Hamlet" with Tom Stoppard's "Rosencrantz and Guildenstern Are Dead"; and (2) George Bernard Shaw's "Pygmalion" with the…

"May the journey continue": Earth 2 fan fiction, or Filling in gaps to revive a canceled series

Directory of Open Access Journals (Sweden)

Francesca Musiani

2010-09-01

Full Text Available This essay explores writing practices in a fan community having to give life to a story deprived of an "official" version: the television series Earth 2. I argue that fan fiction writing for this prematurely canceled series exhibits peculiar features in comparison to fan writing for established series: for example, temporality, choice of protagonists, character pairings, and challenges to the original conception(s of the series. Writing fan fiction for a canceled series is not about creating alternatives to an existing story, but about filling in gaps; it brings to light the ways in which fan fiction deals with closure. I take as a case study Earth 2, a series aired by NBC in the United States in 1994–95, whose first and only season ended in a cliffhanger episode hinting that a mysterious ailment had struck the main and most popular character. Shortly afterward, a significant number of Earth 2 Web sites, online conventions, and especially fan stories started developing; they explored what could have happened next and bore nostalgic but combative mottoes and titles such as "May the Journey Continue." I explore the specific features of Earth 2 fan fiction production and sharing by analyzing the main Earth 2 fan fiction archives on the Web and the responses to my email interviews of fan writers. Exemplars of the Earth 2 case are compared to those of other science fiction TV series, both prematurely canceled (Firefly, Space: Above and Beyond and long-lived (Babylon 5, Star Trek: Deep Space 9.

Study on the properties of tunable prohibited band gaps for one-dimensional ternary magnetized plasma photonic crystals

International Nuclear Information System (INIS)

Zhang Haifeng; Zheng Jianping; Zhu Rongjun

2012-01-01

The transfer matrix method was applied to study on the properties of tunable prohibited band gaps for one-dimensional ternary magnetized plasma photonic crystals with TE wave arbitrary incident under ideal conditions. TE wave would be divided into left-handed circularly polarized wave and right-handed circularly polarized wave after propagation through one-dimensional ternary magnetized plasma photonic crystals. The calculated transmission coefficients were used to analyze the effects of parameter of plasma, plasma filling factor, incident angle and relative dielectric constant for dielectric layer on the properties of tunable prohibited band gap. The results illustrate that the width of band gaps can not be broadened by increasing plasma collision frequency, the numbers and width of band gaps can be tuned by changing plasma frequency, plasma filling factor and relative dielectric constant for dielectric layer. The band gaps for right-handed circularly polarized wave can be tuned by the plasma gyro frequency, but band gaps for the left-handed circularly polarized wave can't influenced. Low-frequency region of band gaps will be broadened, while high-frequency region of band gaps will be firstly narrow and then broaden with increasing incident angle. (authors)

8 CFR 235.3 - Inadmissible aliens and expedited removal.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Inadmissible aliens and expedited removal. 235.3 Section 235.3 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS INSPECTION OF PERSONS APPLYING FOR ADMISSION § 235.3 Inadmissible aliens and expedited removal. (a) Detention...

OPTIMIZATION MODEL FOR MATERIALS EXPEDITION: AN APLICATION IN A RETAIL CHAIN STORE

Directory of Open Access Journals (Sweden)

Rogério Santos Cruz

2016-07-01

Full Text Available In several companies, transportation costs are most part logistics costs. In this context, the appropriate distribution planning figures as a strategic activity in the generation of competitiveness. Previous studies that analyzed the transportation problem do not consider the role of the expedition in their models. This research investigated a transportation problem considering the expedition of goods. A midsize retailer located in the ABC region of Sao Paulo was used to conduct a case study. In addition to documentary data, interviews were conducted with professionals involved in the expedition operation. The results indicated that the company could optimize their expedition by considering the changes proposed in this study. We conclude that the expedition is an important activity in the analysis of a transport model.

ISS Expedition 08 Press Kit

Data.gov (United States)

National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...

The military role in filling the security gap after armed conflict : Three cases

NARCIS (Netherlands)

Neuteboom, Peter; Soeters, J.M.M.L.

2017-01-01

During stabilization operations, the host nation and the international community are often confronted with a security gap, which could be a prelude to an explosive growth of crime and public disorder. In the absence of a functioning local police, an alternative is that the (international) military

Caudwell xtreme everest expedition

NARCIS (Netherlands)

Grocott, Michael P. W.; Martin, Daniel S.; Wilson, Mark H.; Mitchell, Kay; Dhillon, Sundeep; Mythen, Monty G.; Montgomery, Hugh E.; Levett, Denny Z. H.; Ahuja, V.; Aref-Adib, G.; Burnham, R.; Chisholm, A.; Clarke, K.; Coates, D.; Coates, M.; Cook, D.; Cox, M.; Dhillon, S.; Dougall, C.; Doyle, P.; Duncan, P.; Edsell, M.; Edwards, L.; Evans, L.; Gardiner, P.; Grocott, M.; Gunning, P.; Hart, N.; Harrington, J.; Harvey, J.; Holloway, C.; Howard, D.; Hurlbut, D.; Imray, C.; Ince, C.; Jonas, M.; van der Kaaij, J.; Khosravi, M.; Kolfschoten, N.; Levett, D.; Luery, H.; Luks, A.; Martin, D.; McMorrow, R.; Meale, P.; Mitchell, K.; Montgomery, H.; Morgan, G.; Morgan, J.; Murray, A.

2010-01-01

The Caudwell Xtreme Everest (CXE) expedition involved the detailed study of 222 subjects ascending to 5300 m or higher during the first half of 2007. Following baseline measurements at sea level, 198 trekker-subjects trekked to Everest Base Camp (EBC) following an identical ascent profile. An

20 CFR 405.705 - When the expedited appeals process may be used.

Science.gov (United States)

2010-04-01

... PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405.705 When the expedited appeals process may be used. If you have filed a disability claim, you may... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false When the expedited appeals process may be...

The Data Gap in the EHR for Clinical Research Eligibility Screening.

Science.gov (United States)

Butler, Alex; Wei, Wei; Yuan, Chi; Kang, Tian; Si, Yuqi; Weng, Chunhua

2018-01-01

Much effort has been devoted to leverage EHR data for matching patients into clinical trials. However, EHRs may not contain all important data elements for clinical research eligibility screening. To better design research-friendly EHRs, an important step is to identify data elements frequently used for eligibility screening but not yet available in EHRs. This study fills this knowledge gap. Using the Alzheimer's disease domain as an example, we performed text mining on the eligibility criteria text in Clinicaltrials.gov to identify frequently used eligibility criteria concepts. We compared them to the EHR data elements of a cohort of Alzheimer's Disease patients to assess the data gap by usingthe OMOP Common Data Model to standardize the representations for both criteria concepts and EHR data elements. We identified the most common SNOMED CT concepts used in Alzheimer 's Disease trials, andfound 40% of common eligibility criteria concepts were not even defined in the concept space in the EHR dataset for a cohort of Alzheimer 'sDisease patients, indicating a significant data gap may impede EHR-based eligibility screening. The results of this study can be useful for designing targeted research data collection forms to help fill the data gap in the EHR.

Expedition 8 Crew Interview: Pedro Duque

Science.gov (United States)

2003-01-01

European Space Agency (ESA) astronaut Pedro Duque is interviewed in preparation for his flight to and eight day stay on the International Space Station (ISS) as part of the Cervantes mission. Duque arrived on the ISS with the Expedition 8 crew onboard a Soyuz TMA-3, the seventh Soyuz flight to the station. He departed from the ISS on a Soyuz TMA-2 with the Expedition 7 crew of the ISS. In the video, Duque answers questions on: the goals of his flight; his life and career path; the Columbus Module, which ESA will contribute to the ISS, the ride onboard a Soyuz, and the importance of the ISS.

The IAEA '97 Pacific Ocean expedition

International Nuclear Information System (INIS)

Povinec, P.P.; Huynh-Ngoc, L.; Liong Wee Kwong, L.

1999-01-01

The International Atomic Energy Agency's Marine Environment Laboratory (IAEA-MEL) started in 1995 a five-year project 'Research on World-wide Marine Radioactivity', generously supported by the Government of Japan. In the framework of the project, IAEA-MEL conducted the 'IAEA '97 Pacific Ocean Expedition' to the NW Pacific Ocean from 21 October to 20 November, 1997. The objectives of the expedition were to provide new data on the current marine radioactivity in order to compare them with data sets obtained during national and international surveys at sites used for radioactive waste dumping or nuclear bomb testing in the NW Pacific Ocean and its marginal seas

Filling the gaps

DEFF Research Database (Denmark)

Tota, Pasqua Marina

2014-01-01

) with the main aim to achieve basic education for all children, youth and adults. A participant in this process since 2000 is the Global Campaign for Education (GCE), an advocacy network of INGOs, established jointly by Oxfam, ActionAid International, Education International and Global March Against Child Labour...

Filling the gaps

DEFF Research Database (Denmark)

Bech-Larsen, Pernille; Linnebjerg, Sofie; Mullins, Michael Finbarr

2018-01-01

Training and knowledge of lighting is an increasingly sought-after professional quality in Denmark and Sweden. However, technological development in the lighting field has been in recent years extremely rapid, not least in Scandinavia. This has led to a situation, where users, designers, specifie...

Field Science Ethnography: Methods For Systematic Observation on an Expedition

Science.gov (United States)

Clancey, William J.; Clancy, Daniel (Technical Monitor)

2001-01-01

The Haughton-Mars expedition is a multidisciplinary project, exploring an impact crater in an extreme environment to determine how people might live and work on Mars. The expedition seeks to understand and field test Mars facilities, crew roles, operations, and computer tools. I combine an ethnographic approach to establish a baseline understanding of how scientists prefer to live and work when relatively unemcumbered, with a participatory design approach of experimenting with procedures and tools in the context of use. This paper focuses on field methods for systematically recording and analyzing the expedition's activities. Systematic photography and time-lapse video are combined with concept mapping to organize and present information. This hybrid approach is generally applicable to the study of modern field expeditions having a dozen or more multidisciplinary participants, spread over a large terrain during multiple field seasons.

Getting it right: Filling the gaps in FERC's stranded cost policies

International Nuclear Information System (INIS)

Gordon, K.; Olson, W.P.

1999-01-01

FERC is currently at a cross-road: It must implement its stranded cost policies properly or the comprehensive approach that Order 888 represents will not be credible. In this context, it is important to remember that public policies aimed at introducing competition into electricity markets will proceed more quickly and effectively if the regulatory bargain is kept. Thus, any plan to introduce competition in electricity must honor existing commitments and provide utilities with a reasonable opportunity to recover prudently incurred investments. By closing the gaps in its stranded cost recovery policies in economically appropriate ways, FERC can reaccelerate the movement to efficient competition in generation markets

ISS Expeditions 16 through 20: Chemical Analysis Results for Potable Water

Science.gov (United States)

Straub, John E., II; Plumlee, Debrah K.; Schultz, John R.

2010-01-01

During the 2-year span from Expedition 16 through Expedition 20, the chemical quality of the potable water onboard the International Space Station (ISS) was verified safe for crew consumption through the return and chemical analysis of archival water samples by the Water and Food Analytical Laboratory (WAFAL) at Johnson Space Center (JSC). Reclaimed cabin humidity condensate and Russian ground-supplied water were the principal sources of potable water for Expeditions 16 through 18. During Expedition 18 the U.S. water processor assembly was delivered, installed, and tested during a 90-day checkout period. Beginning with Expedition 19, U.S. potable water recovered from a combined waste stream of humidity condensate and pretreated urine was also available for ISS crew use. A total of 74 potable water samples were collected using U.S. sampling hardware during Expeditions 16 through 20 and returned on both Shuttle and Soyuz vehicles. The results of JSC chemical analyses of these ISS potable water samples are presented in this paper. Eight potable water samples collected in flight with Russian hardware were also received for analysis, as well as 5 preflight samples of Rodnik potable water delivered to ISS on Russian Progress vehicles 28 to 34. Analytical results for these additional potable water samples are also reported and discussed.

Band gap of two-dimensional fiber-air photonic crystals

Energy Technology Data Exchange (ETDEWEB)

Yang, Shu, E-mail: yangshu5678@163.com; Li, Masha

2016-04-15

A two-dimensional photonic crystal (PC) composed of textile fiber and air is initially discussed in this paper. Textile materials are so called soft materials, which are different from the previous PCs composed of rigid materials. The plain wave expansion method is used to calculate band structure of different PCs by altering component properties or structural parameters. Results show that the dielectric constant of textile fibers, fiber filling ratio and lattice arrangement are effective factors which influence PCs' band gap. Yet lattice constant and fiber diameter make inconspicuous influence on the band gap feature.

Optical study of the band structure of wurtzite GaP nanowires

OpenAIRE

Assali, S.; Greil, J.; Zardo, I.; Belabbes, A.; de Moor, M.W.A.; Kölling, S.; Koenraad, P.M.; Bechstedt, F.; Bakkers, E.P.A.M.; Haverkort, J.E.M.

2016-01-01

We investigated the optical properties of wurtzite (WZ) GaP nanowires by performing photoluminescence (PL) and time-resolved PL measurements in the temperature range from 4 K to 300 K, together with atom probe tomography to identify residual impurities in the nanowires. At low temperature, the WZ GaP luminescence shows donor-acceptor pair emission at 2.115 eV and 2.088 eV, and Burstein-Moss band-filling continuum between 2.180 and 2.253 eV, resulting in a direct band gap above 2.170 eV. Sharp...

Selection and specification criteria for fills for cut-and-fill mining

Energy Technology Data Exchange (ETDEWEB)

Thomas, E. G.

1980-05-15

Because of significant differences in placement and loading conditions, the ideal fill material for a cut-and-fill operation has different characteristics to those for a fill for a filled open stoping operation. The differing requirements of the two mining operations must be understood and accounted for in establishing fill selection and specification criteria. Within the paper, aspects of the particular requirements of cut-and-fill mining are analyzed and related to the specific fill tests and properties required. Emphasis is placed upon the role of fill in ground support, though this cannot be isolated from overall fill performance. Where appropriate, test data are introduced and areas requiring continuing research highlighted.

38 CFR 20.1500 - Rule 1500. Expedited Claims Adjudication Initiative.

Science.gov (United States)

2010-07-01

... Claims Adjudication Initiative. 20.1500 Section 20.1500 Pensions, Bonuses, and Veterans' Relief... Adjudication Initiative-Pilot Program § 20.1500 Rule 1500. Expedited Claims Adjudication Initiative. (a) Purpose. The Expedited Claims Adjudication Initiative is a pilot program designed to streamline the claims...

Forest filled with gaps : effects of gap size on water and nutrient cycling in tropical rain forest : a study in Guyana

NARCIS (Netherlands)

Dam, O. van

2001-01-01

Guyana's forests are selectively logged and a forest management is desired that is economically sustainable and ecologically responsible. Canopy gaps, created by selective logging, induce changes to microclimatic and edaphic conditions. These changes influence the regeneration of the

Paradoxical gap in the relative ages of T Tauri stars

International Nuclear Information System (INIS)

Weaer, W.B.

1984-01-01

The frequency distribution of T Tauri stars of different Youth (relative age) shows a pronounced gap at 5% of their time to the zero-age main sequence. This gap, which occurs in all of the four major T Tauri associations, is too large to be filled by unclassifiable veiled stars. It is nearly vertical on the Hertzsprung-Russell diagram, is centered near spectral class K5, and lies close to the transition between the convective and radiative tracks of the pre-main-sequence stars

38 CFR 3.161 - Expedited Claims Adjudication Initiative-Pilot Program.

Science.gov (United States)

2010-07-01

... Adjudication Initiative-Pilot Program. 3.161 Section 3.161 Pensions, Bonuses, and Veterans' Relief DEPARTMENT... Claims § 3.161 Expedited Claims Adjudication Initiative—Pilot Program. Rules pertaining to the Expedited Claims Adjudication Initiative Pilot Program are set forth in part 20, subpart P, of this chapter...

Adaptive sampling program support for expedited site characterization

International Nuclear Information System (INIS)

Johnson, R.

1993-01-01

Expedited site characterizations offer substantial savings in time and money when assessing hazardous waste sites. Key to some of these savings is the ability to adapt a sampling program to the ''real-time'' data generated by an expedited site characterization. This paper presents a two-prong approach to supporting adaptive sampling programs: a specialized object-oriented database/geographical information system for data fusion, management and display; and combined Bayesian/geostatistical methods for contamination extent estimation and sample location selection

Japan Sea expeditions for studies on water circulation and transport processes of radionuclides

International Nuclear Information System (INIS)

Togawa, Orihiko; Ito, Toshimichi; Kobayashi, Takuya; Otosaka, Shigeyoshi; Suzuki, Takashi

2006-02-01

The Japan Sea expeditions at the Japan Atomic Energy Agency (JAEA from October 1, 2005, former JAERI: Japan Atomic Energy Research Institute until September 30, 2005) were started on its participation in the first and second Japanese-Korean-Russian joint expeditions in 1994 and 1995 to investigate the situation on marine pollution due to radioactive wastes dumped in the Japan Sea and other seas around Japan. After the joint expeditions, JAEA continued to conduct the Japan Sea expeditions not only to monitor the impacts of radioactive wastes dumped in the Japan Sea, but also to investigate water circulation and the migration behavior of radionuclides in the Japan Sea. Taking account of some difficulties and constraints due to the political boundaries in the Japan Sea, the expeditions were carried out, separating the sea into two regions; one is the Japanese exclusive economical zone (EEZ) and the other is the Russian EEZ. The data of observations and measurements obtained in the two regions were analyzed together. The program of the Japan Sea expeditions included large-volume seawater sampling at different depths and seabed sediment sampling for measurements of representative anthropogenic radionuclides. To investigate the migration behavior of the radionuclides more in detail, associated oceanographic observations were also implemented; CTD/MBS (conductivity-temperature-depth meter with multi-bottle sampler) casts, analysis of dissolved oxygen and nutrients, deployment and recovery of mooring systems with current meters and sediment traps, and so on. Additional seawater samples were taken with CTD/MBS for further analysis on land. This report summarizes the results of the Japan Sea expeditions (Phase 1) conducted and/or jointed by JAEA from 1994 to 2002. First the report explains oceanographic features of the Japan Sea, main expeditions in the past and the summarized results of the Japanese-Korean-Russian joint expeditions. Then the report gives an outline of the

Gap-filling a spatially explicit plant trait database: comparing imputation methods and different levels of environmental information

Directory of Open Access Journals (Sweden)

R. Poyatos

2018-05-01

allowed us to fill the gaps in the IEFC incomplete dataset (5495 plots and quantify imputation uncertainty. Resulting spatial patterns of the studied traits in Catalan forests were broadly similar when using species means, regression kriging or the best-performing MICE application, but some important discrepancies were observed at the local level. Our results highlight the need to assess imputation quality beyond just imputation accuracy and show that including environmental information in statistical imputation approaches yields more plausible imputations in spatially explicit plant trait datasets.

Effect of anitiferromagnetism on superconducting gap of cuprates

International Nuclear Information System (INIS)

Rout, G.C.; Panda, B.N.; Bishoyi, K.C.

2000-01-01

The interplay between superconductivity (SC) and antiferromagnetism (AF) is studied in strongly correlated systems: R 2-x M x CuO 4 (R = Nd, La, Pr, Gd; M = Sr, Ge). It is assumed that superconductivity arises due to BCS pairing mechanism in presence of AF in Cu lattices of Cu-O planes. Temperature dependence of SC gap as well as staggered magnetic field are calculated analytically and solved self-consistently with respect to half-filled band situation for different model parameters λ 1 , and λ 2 being SC and AF coupling parameters respectively. The SC gap is studied in the coexistent phase of SC and AFM. (author)

Expeditions and other fieldwork

NARCIS (Netherlands)

NN,

1989-01-01

The Forest Research Institute of Malaysia (FRIM) has started a project on the conservation of fruit trees. Collecting expeditions have been made in 1988 to the Kraun Game Reserve (c. 102° 30’ E, 3° 40’ N), Maxwell’s Hill, Endau-Rompin. Collections were not only made of fruit trees, but also of any

Expeditions and other exploration

NARCIS (Netherlands)

NN,

1964-01-01

Previous to the 4th UNESCO Expedition, Dr H. Sleumer of the Rijksherbarium made three trips together with Mr Tem Smitinand, first to Doi Chiengdao and Doi Suthep in the North (Aug. 15-21, 1963), then to the Khao Yai National Park in Central Siam (Aug. 28-29), then to Pha Nok Khao and Phu Krading

Corporate governance from the perspective of the past and the present and the need to fill an international GAP

Directory of Open Access Journals (Sweden)

Tariq Tawfeeq Yousif Alabdullah

2016-10-01

Full Text Available Corporate governance (CG emerged many centuries ago, despite the debate on this subject and the widely-held view that it commenced in the 2000s. Thus, CG is not a new practice and over time it has become a precise system. In this study, the origins of CG are examined by the author in order to shed light on the underlying facts concerning the roots of this discipline and its history. By introducing such facts, it provides the background of the emergence of CG as clear principles and mechanisms. In the organizational sense, this study is considered important for both investors and organizations in applying the principles of CG and its mechanisms in all countries worldwide. The objective of this paper is to provide useful information to both researchers and practitioners in relation to CG including the fundamental principles and its history. This paper will present a solution to fill the gap in the literature concerning the relationship between CG and a firm’s performance in such instances when the results of examining such a relationship are found to be inconsistent. A number of factors have contributed to this author’s desire to research the relationship between a firm’s performance and CG and that includes the author’s experience and understanding of accounting over the years especially in the CG discipline, and also further to an in-depth literature review

Extension of the Mott-Gurney Law for a Bilayer Gap

Science.gov (United States)

Dubinov, A. E.; Kitayev, I. N.

2018-04-01

Steady drift states of an electron flow in a planar gap filled with a bilayer dielectric have been considered. Exact mathematical formulas have been derived that describe the distributions of the electrostatic potential and space charge limited electron flow current (extended Mott-Gurney law for a bilayer diode).

Collaboration tin gap: a new day for faith community nursing.

Science.gov (United States)

Morris, G Scott; Miller, Susan Martins

2014-01-01

The Church Health Center (CHC) in Memphis, Tennessee has worked to fill gaps in healthcare since 1987. With the advent of the Affordable Care Act and millions unable to afford insurance, the CHC is partnering with faith community nurses in new opportunities to offer wholistic healthcare toward wellness.

A Sub-channel Analysis of a VHTR Fuel Block with Tin Gap-Filler

International Nuclear Information System (INIS)

Cho, Chung Ho; Kim, Yong Hee; Yi, Yong Sun; Kim, Hong Pyo

2005-01-01

In the Nuclear Hydrogen Development and Demonstration (NHDD) project, two types of VHTRs (Very High Temperature Reactors), prismatic or pebble bed, are under investigation as the nuclear heat source for hydrogen production. In general, the targeted coolant outlet temperature of VHTR is 950∼1000 .deg. C and the maximum allowable fuel temperature is 1250 .deg. C during the normal operation. In the case of the prismatic reactor (PMR), conventional fuel designs result in a small margin in the maximum fuel temperature. This is one of the biggest demerits of the prismatic type In this paper, a technique of lowering the maximum fuel temperature is suggested. The PMR fuel assembly is comprised of many coolant holes and fuel channels. Cylindrical fuel compacts are stacked inside the fuel channel. Consequently, there should be a physical gap between the fuel compact and graphite block, which is filled with the He gas in the conventional design. The heat transfer coefficient of the He gap is very poor, and this increases the fuel temperature substantially. In the proposed design measure, the gap is filled with a liquid metal, tin (Sn) that has a very high thermal conductivity. The effects of tin in the gap with gap distance variation in the viewpoint of thermal hydraulics are quantitatively discussed. Also, the effects of the variations of the axial power distribution are discussed

Zoological results of the Dutch Scientific Expedition to Central-Borneo

NARCIS (Netherlands)

Lidth de Jeude, van Th.W.

1905-01-01

The following pages contain an enumeration of the lizards collected in Borneo by the Dutch Borneo-Expedition, of which expedition Mr. J. Büttikofer was the zoologist, and also of the lizards collected by Dr. A. W. Nieuwenhuis during his travels in the interior of this island. The collections made

49 CFR 385.308 - What may cause an expedited action?

Science.gov (United States)

2010-10-01

... SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.308 What may cause an expedited... inspections or by any other means, may be subjected to an expedited safety audit or a compliance review or may..., or missing a required endorsement. (2) Operating a vehicle placed out of service for violations of...

Exact Fill Rates for the (R, S Inventory Control with Discrete Distributed Demands for the Backordering Case

Directory of Open Access Journals (Sweden)

Eugenia BABILONI

2012-01-01

Full Text Available The fill rate is usually computed by using the traditional approach, which calculates it as the complement of the quotient between the expected unfulfilled demand and the expected demand per replenishment cycle, instead of directly the expected fraction of fulfilled demand. Furthermore the available methods to estimate the fill rate apply only under specific demand conditions. This paper shows the research gap regarding the estimation procedures to compute the fill rate and suggests: (i a new exact procedure to compute the traditional approximation for any discrete demand distribution; and (ii a new method to compute the fill rate directly as the fraction of fulfilled demand for any discrete demand distribution. Simulation results show that the latter methods outperform the traditional approach, which underestimates the simulated fill rate, over different demand patterns. This paper focuses on the traditional periodic review, base stock system when backlogged demands are allowed.

Mt. Kilimanjaro expedition in earth science education

Science.gov (United States)

Sparrow, Elena; Yoshikawa, Kenji; Narita, Kenji; Brettenny, Mark; Yule, Sheila; O'Toole, Michael; Brettenny, Rogeline

2010-05-01

Mt. Kilimanjaro, Africa's highest mountain is 5,895 meters above sea level and is located 330 km south of the equator in Tanzania. In 1976 glaciers covered most of Mt. Kilimanjaro's summit; however in 2000, an estimated eighty percent of the ice cap has disappeared since the last thorough survey done in 1912. There is increased scientific interest in Mt. Kilimanjaro with the increase in global and African average temperatures. A team of college and pre-college school students from Tanzania, South Africa and Kenya, teachers from South Africa and the United States, and scientists from the University of Alaska Fairbanks in the United States and Akita University in Japan, climbed to the summit of Mt Kilimanjaro in October 2009. They were accompanied by guides, porters, two expedition guests, and a videographer. This expedition was part of the GLOBE Seasons and Biomes Earth System Science Project and the GLOBE Africa science education initiative, exploring and contributing to climate change studies. Students learned about earth science experientially by observing their physical and biological surroundings, making soil and air temperature measurements, participating in discussions, journaling their experience, and posing research questions. The international trekkers noted the change in the biomes as the altitude, temperature and conditions changed, from cultivated lands, to rain forest, heath zone, moorland, alpine desert, and summit. They also discovered permafrost, but not at the summit as expected. Rather, it was where the mountain was not covered by a glacier and thus more exposed to low extreme temperatures. This was the first report of permafrost on Mt. Kilimanjaro. Classrooms from all over the world participated in the expedition virtually. They followed the trek through the expedition website (http://www.xpeditiononline.com/) where pictures and journals were posted, and posed their own questions which were answered by the expedition and base camp team members

Knowledge-Base Semantic Gap Analysis for the Vulnerability Detection

Science.gov (United States)

Wu, Raymond; Seki, Keisuke; Sakamoto, Ryusuke; Hisada, Masayuki

Web security became an alert in internet computing. To cope with ever-rising security complexity, semantic analysis is proposed to fill-in the gap that the current approaches fail to commit. Conventional methods limit their focus to the physical source codes instead of the abstraction of semantics. It bypasses new types of vulnerability and causes tremendous business loss.

STAT, GAPS, STRAIN, DRWDIM: a system of computer codes for analyzing HTGR fuel test element metrology data. User's manual

Energy Technology Data Exchange (ETDEWEB)

Saurwein, J.J.

1977-08-01

A system of computer codes has been developed to statistically reduce Peach Bottom fuel test element metrology data and to compare the material strains and fuel rod-fuel hole gaps computed from these data with HTGR design code predictions. The codes included in this system are STAT, STRAIN, GAPS, and DRWDIM. STAT statistically evaluates test element metrology data yielding fuel rod, fuel body, and sleeve irradiation-induced strains; fuel rod anisotropy; and additional data characterizing each analyzed fuel element. STRAIN compares test element fuel rod and fuel body irradiation-induced strains computed from metrology data with the corresponding design code predictions. GAPS compares test element fuel rod, fuel hole heat transfer gaps computed from metrology data with the corresponding design code predictions. DRWDIM plots the measured and predicted gaps and strains. Although specifically developed to expedite the analysis of Peach Bottom fuel test elements, this system can be applied, without extensive modification, to the analysis of Fort St. Vrain or other HTGR-type fuel test elements.

Filling Predictable and Unpredictable Gaps, with and without Similarity-Based Interference: Evidence for LIFG Effects of Dependency Processing.

Science.gov (United States)

Leiken, Kimberly; McElree, Brian; Pylkkänen, Liina

2015-01-01

One of the most replicated findings in neurolinguistic literature on syntax is the increase of hemodynamic activity in the left inferior frontal gyrus (LIFG) in response to object relative (OR) clauses compared to subject relative clauses. However, behavioral studies have shown that ORs are primarily only costly when similarity-based interference is involved and recently, Leiken and Pylkkänen (2014) showed with magnetoencephalography (MEG) that an LIFG increase at an OR gap is also dependent on such interference. However, since ORs always involve a cue indicating an upcoming dependency formation, OR dependencies could be processed already prior to the gap-site and thus show no sheer dependency effects at the gap itself. To investigate the role of gap predictability in LIFG dependency effects, this MEG study compared ORs to verb phrase ellipsis (VPE), which was used as an example of a non-predictable dependency. Additionally, we explored LIFG sensitivity to filler-gap order by including right node raising structures, in which the order of filler and gap is reverse to that of ORs and VPE. Half of the stimuli invoked similarity-based interference and half did not. Our results demonstrate that LIFG effects of dependency can be elicited regardless of whether the dependency is predictable, the stimulus materials evoke similarity-based interference, or the filler precedes the gap. Thus, contrary to our own prior data, the current findings suggest a highly general role for the LIFG in dependency interpretation that is not limited to environments involving similarity-based interference. Additionally, the millisecond time-resolution of MEG allowed for a detailed characterization of the temporal profiles of LIFG dependency effects across our three constructions, revealing that the timing of these effects is somewhat construction-specific.

ISS Potable Water Quality for Expeditions 26 through 30

Science.gov (United States)

Straub, John E., II; Plumlee, Debrah K.; Schultz, John R.; McCoy, J. Torin

2012-01-01

International Space Station (ISS) Expeditions 26-30 spanned a 16-month period beginning in November of 2010 wherein the final 3 flights of the Space Shuttle program finished ISS construction and delivered supplies to support the post-shuttle era of station operations. Expedition crews relied on several sources of potable water during this period, including water recovered from urine distillate and humidity condensate by the U.S. water processor, water regenerated from humidity condensate by the Russian water recovery system, and Russian ground-supplied potable water. Potable water samples collected during Expeditions 26-30 were returned on Shuttle flights STS-133 (ULF5), STS-134 (ULF6), and STS-135 (ULF7), as well as Soyuz flights 24-27. The chemical quality of the ISS potable water supplies continued to be verified by the Johnson Space Center s Water and Food Analytical Laboratory (WAFAL) via analyses of returned water samples. This paper presents the chemical analysis results for water samples returned from Expeditions 26-30 and discusses their compliance with ISS potable water standards. The presence or absence of dimethylsilanediol (DMSD) is specifically addressed, since DMSD was identified as the primary cause of the temporary rise and fall in total organic carbon of the U.S. product water that occurred in the summer of 2010.

Analysis of optical band-gap shift in impurity doped ZnO thin films by using nonparabolic conduction band parameters

International Nuclear Information System (INIS)

Kim, Won Mok; Kim, Jin Soo; Jeong, Jeung-hyun; Park, Jong-Keuk; Baik, Young-Jun; Seong, Tae-Yeon

2013-01-01

Polycrystalline ZnO thin films both undoped and doped with various types of impurities, which covered the wide carrier concentration range of 10 16 –10 21 cm −3 , were prepared by magnetron sputtering, and their optical-band gaps were investigated. The experimentally measured optical band-gap shifts were analyzed by taking into account the carrier density dependent effective mass determined by the first-order nonparabolicity approximation. It was shown that the measured shifts in optical band-gaps in ZnO films doped with cationic dopants, which mainly perturb the conduction band, could be well represented by theoretical estimation in which the band-gap widening due to the band-filling effect and the band-gap renormalization due to the many-body effect derived for a weakly interacting electron-gas model were combined and the carrier density dependent effective mass was incorporated. - Highlights: ► Optical band-gaps of polycrystalline ZnO thin films were analyzed. ► Experimental carrier concentration range covered from 10 16 to 10 21 cm −3 . ► Nonparabolic conduction band parameters were used in theoretical analysis. ► The band-filling and the band-gap renormalization effects were considered. ► The measured optical band-gap shifts corresponded well with the calculated ones

Bridging the Gap Between Scientists and Classrooms: Scientist Engagement in the Expedition Earth and Beyond Program

Science.gov (United States)

Graff, P. V.; Stefanov, W. L.; Willis, K. J.; Runco, S.

2012-01-01

Teachers in today s classrooms need to find creative ways to connect students with science, technology, engineering, mathematics (STEM) experts. These STEM experts can serve as role models and help students think about potential future STEM careers. They can also help reinforce academic knowledge and skills. The cost of transportation restricts teachers ability to take students on field trips exposing them to outside experts and unique learning environments. Additionally, arranging to bring in guest speakers to the classroom seems to happen infrequently, especially in schools in rural areas. The Expedition Earth and Beyond (EEAB) Program [1], facilitated by the Astromaterials Research and Exploration Science (ARES) Directorate Education Program at the NASA Johnson Space Center has created a way to enable teachers to connect their students with STEM experts virtually. These virtual connections not only help engage students with role models, but are also designed to help teachers address concepts and content standards they are required to teach. Through EEAB, scientists are able to actively engage with students across the nation in multiple ways. They can work with student teams as mentors, participate in virtual student team science presentations, or connect with students through Classroom Connection Distance Learning (DL) Events.

Gaps in monitoring systems for Implanon NXT services in South Africa

African Journals Online (AJOL)

Staff often took the initiative to fill gaps in reporting systems. Current systems are unable to accurately monitor uptake or discontinuation, or identify aspects of services requiring strengthening. Lack of pharmacovigilance data is especially concerning. Deficiencies noted in these monitoring systems may be common to family ...

Pleistocene to Miocene Calcareous Nannofossil Biostratigraphy from IODP Expedition 334 Hole U1381A and Expedition 352 Hole U1439A

Science.gov (United States)

Power, M.; Scientists, I. E.; Avery, A. J.

2015-12-01

Samples for this study were collected from drill cores taken during the Integrated Ocean Drilling Program (IODP) Expeditions 334 and 352 at Sites U1381 and U1439, respectively. Both of these expeditions were focused around subduction zones and, therefore, had priorities to determine time frames for the initiation of subduction. There are two main objectives for this study, the first being to age-date Pleistocene to Miocene sediments from the western offshore continental margin of Costa Rica (IODP Expedition 334) via calcareous nannofossils. The second objective is to age-date the Miocene sediments from the fore-arc of the Izu-Bonin-Mariana system, east of Japan (IODP Expedition 352), using calcareous nannofossils. Shore-based analysis allows for high-resolution study to determine exact biostratigraphic zonations. These zonations reflect specific time frames based on the occurrence or non-occurrence of certain nannofossil species. Once these zonations are determined, scientists can use the data to identify the initiation of seismic processes that often occur in these regions. Calcareous nannofossil biostratigraphy has now provided zonations for the samples taken from IODP Expedition 334 cores. Samples from core 6R are assigned to the Pleistocene nannofossil Zone NN19 due to the presence ofPseudoemiliania lacunosa and the absence of Emiliania huxleyi. Using the zonal scheme by de Kaenel (1999), this can further be broken down into Event 18 due to the presence of Gephyrocapsa oceanica larger than 4 μm but less than 5 μm, the presence of Calcidiscus macintyrei smaller than 11 μm, and the absence ofGephyrocapsa caribbeanica larger than 4 μm. De Kaenel (1999) has assigned this event datum an age of 1.718 Ma using orbital time scales and oxygen isotope data. Below these samples, an extensive hiatus ranges from the Pleistocene to the early Miocene. Samples from cores 7R through 10R are assigned to nannofossil zone NN5; however, it is impossible to constrain the top of

Decreased anaerobic performance and hormone adaptation after expedition to Peak Lenin.

Science.gov (United States)

Chen, Kung-tung; Chen, Yu-yawn; Wu, Huey-june; Chang, Chen-kang; Lee, Wen-tsung; Lu, Yen-yuan; Liu, Chieh-chung; Yang, Rong-sen; Lin, Jung-charng

2008-11-20

The change of anaerobic exercise abilities during and after a high-altitude expedition or hypoxic exposure is not well studied. To evaluate the effects of an extreme-altitude expedition on anaerobic performance, the 10-second supramaximal test and endocrine hormones were evaluated before and after an expedition to Peak Lenin. Four subjects (3 male and 1 female, age (30.5 +/- 16.5) years) were recruited into the study. Three sets of tests were performed, including a basic test at sea level and 20 days before first arrival at the base camp (3600 m), a middle test done at day after returning from the summit to the base camp and the post test at the 10th day after return to the sea level. Both the supramaximal test, performed by a cycle ergometer, and body composition, performed by bioelectrical impedance analysis, were completed before the basic test and post test. The endocrine hormones including cortisol, growth hormone, testosterone, noradrenaline, adrenaline, dopamine, glucagon and beta-endorphin were measured at all tests. Comparing the conditions before and after the expedition, the body measurement parameters were decreased after the expedition, i.e., body weight (-4.22%, P Lenin had occurred. The real physiological significance needs to be further investigated.

Spheres of Interest: Imperialism, Culture, and Practice in British Solar Eclipse Expeditions, 1860-1914

Science.gov (United States)

Pang, Alex Soojung-Kim

Scientific expeditions have played an important role in the development of Western Science, but have received far less attention than theory-making or experiment. This is a cultural and social history of British solar eclipse expeditions and observing practices. An introductory chapter outlines the historiography of scientific practice, imperialism and science, and scientific expeditions, and explains the importance of solar eclipses to nineteenth-century science. The chapters follow expeditions from their planning, through their execution, and into the publication of results. Chapter 2 is an institutional and social history of British and American eclipse planning. British expeditions were organized by national societies, while American expeditions were planned by individual observatories and colleges. Chapters 3 and 4 move into the field. They show how the evolution of tourist culture, the expansion of imperial spheres of political control, the transfer of Western technological systems to colonial territories shaped the experience of going on an expedition, and even made accurate astrophysical observation possible. They also examine the roles women played on eclipse expeditions. Chapters 5 and 6 examine spectroscopic and visual observation. They study the effects of intellectual shifts, the introduction of photography, and the scaling up of instruments on observing practices. Chapter 6 shows how visual and photographic observations of the solar corona were made. Chapter 7 follows those pictures out of the field, and examines how they were copied and shared with other astronomers.

100 kV reliable accurately-synchronized spark gap

International Nuclear Information System (INIS)

Bosamykin, V.S.; Gerasimov, A.I.; Zenkov, D.I.

1987-01-01

100 kV three-electrode spark gap filled with 40% SF 6 +60% N 2 mixture under the pressure of ∼ 1 MPa, which has spread Δt ≤ ± 5 ns of operating time delay in the range of 10 4 triggerings and commutation energy of 2.5 kJ, providing electric strength is 100%, is described; at 10 kJ Δt is less than ± 10 ns for 10 3 triggerings. Parallel connection of 16 groups, each consisting of 5 spark gaps with series connection, electric strength being 100%, in the pulse charging unit of Arkadiev-Marx generator being in operation for several years manifested their high efficiency; mutual group spread is ≤ ± 15 ns

Adding Some Gas Can Completely Change How an Object in a Liquid-Filled Housing Responds to Vibration

Science.gov (United States)

Torczynski, J. R.; O'Hern, T. J.; Clausen, J. R.

2015-11-01

Adding a little gas can completely change the motion of an object in a liquid-filled housing during vibration. A common system exhibiting this behavior is a spring-supported piston in a liquid-filled cylinder, where the gaps between them are narrow and depend on the piston position. When gas is absent, the piston's vibrational response is highly overdamped due to forcing viscous liquid through narrow gaps. When a small amount of gas is added, Bjerknes forces cause some of the gas to migrate below the piston. The resulting two gas regions form a pneumatic spring that enables the liquid to move with the piston, with the result that very little liquid is forced through the narrow gaps. This ``Couette mode'' has low damping and thus has a strong resonance near the frequency given by the pneumatic spring constant and the piston mass. At this frequency, the piston response is large, and the nonlinearity from the gap geometry produces a net force on the piston. This ``rectified'' force can be many times the piston's weight and can cause the piston to compress its supporting spring. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Controls on Filling and Evacuation of Sediment in Waterfall Plunge Pools

Science.gov (United States)

Scheingross, J. S.; Lamb, M. P.

2014-12-01

Many waterfalls are characterized by the presence of deep plunge pools that experience periods of sediment fill and evacuation. These cycles of sediment fill are a first order control on the relative magnitude of lateral versus vertical erosion at the base of waterfalls, as vertical incision requires cover-free plunge pools to expose the bedrock floor, while lateral erosion can occur when pools are partially filled and plunge-pool walls are exposed. Currently, there exists no mechanistic model describing sediment transport through waterfall plunge pools, limiting our ability to predict waterfall retreat. To address this knowledge gap, we performed detailed laboratory experiments measuring plunge-pool sediment transport capacity (Qsc_pool) under varying waterfall and plunge-pool geometries, flow hydraulics, and sediment size. Our experimental plunge-pool sediment transport capacity measurements match well with a mechanistic model we developed which combines existing waterfall jet theory with a modified Rouse profile to predict sediment transport capacity as a function of water discharge and suspended sediment concentration at the plunge-pool lip. Comparing the transport capacity of plunge pools to lower gradient portions of rivers (Qsc_river) shows that, for transport limited conditions, plunge pools fill with sediment under modest water discharges when Qsc_river > Qsc_pool, and empty to bedrock under high discharges when Qsc_pool > Qsc_river. These results are consistent with field observations of sand-filled plunge pools with downstream boulder rims, implying filling and excavation of plunge pools over single-storm timescales. Thus, partial filling of waterfall plunge pools may provide a mechanism to promote lateral undercutting and retreat of waterfalls in homogeneous rock in which plunge-pool vertical incision occurs during brief large floods that expose bedrock, whereas lateral erosion may prevail during smaller events.

Fragment library design: using cheminformatics and expert chemists to fill gaps in existing fragment libraries.

Science.gov (United States)

Kutchukian, Peter S; So, Sung-Sau; Fischer, Christian; Waller, Chris L

2015-01-01

Fragment based screening (FBS) has emerged as a mainstream lead discovery strategy in academia, biotechnology start-ups, and large pharma. As a prerequisite of FBS, a structurally diverse library of fragments is desirable in order to identify chemical matter that will interact with the range of diverse target classes that are prosecuted in contemporary screening campaigns. In addition, it is also desirable to offer synthetically amenable starting points to increase the probability of a successful fragment evolution through medicinal chemistry. Herein we describe a method to identify biologically relevant chemical substructures that are missing from an existing fragment library (chemical gaps), and organize these chemical gaps hierarchically so that medicinal chemists can efficiently navigate the prioritized chemical space and subsequently select purchasable fragments for inclusion in an enhanced fragment library.

Gender, culture, and astrophysical fieldwork: Elizabeth Campbell and the Lick Observatory-Crocker eclipse expeditions.

Science.gov (United States)

Pang, A. S.-K.

The article is organized as follows. It begins with an overview of women in nineteenth-century American science. It then describes the culture of mountaintop observatories and life on Mount Hamilton. Elizabeth Campbell's unique role in the Crocker-Lick expeditions drew upon her equally unique role in the observatory, and also on the meaning given to women's work in general on the mountain. The bulk of the article focuses on the Campbells and their expeditions to India in 1898, Spain in 1905, and the South Pacific in 1908. The third section compares the Lick Observatory expeditions to those conducted by David Todd of Amherst College. Todd's wife, Mabel Loomis Todd, went into the field several times with her husband, but her place in the field was radically different from Elizabeth Campbell's, a difference that can be ascribed to a combination of local culture and personality. Finally, it compares American expeditions to British expeditions of the period, to see what the absence of British women on expeditions can tell us about the way national scientific styles and cultures affected gender roles in science.

Expedition 357 Preliminary Report: Atlantis Massif Serpentinization and Life

OpenAIRE

Früh-Green, GL; Orcutt, BN; Green, S; Cotterill, C; McCaig, AM; Expedition 357 Scientists,

2016-01-01

International Ocean Discovery Program (IODP) Expedition 357 successfully cored an east–west transect across the southern wall of Atlantis Massif on the western flank of the Mid-Atlantic Ridge to study the links between serpentinization processes and microbial activity in the shallow subsurface of highly altered ultramafic and mafic sequences that have been uplifted to the seafloor along a major detachment fault zone. The primary goals of this expedition were to (1) examine the role of serpent...

Low-Symmetry Gap Functions of Organic Superconductors

Science.gov (United States)

Mori, Takehiko

2018-04-01

Superconducting gap functions of various low-symmetry organic superconductors are investigated starting from the tight-binding energy band and the random phase approximation by numerically solving Eliashberg's equation. The obtained singlet gap function is approximately represented by an asymmetrical dx2 - y2 form, where two cosine functions are mixed in an appropriate ratio. This is usually called d + s wave, where the ratio of the two cosine functions varies from 1:1 in the two-dimensional limit to 1:0 in the one-dimensional limit. A single cosine function does not make a superconducting gap in an ideal one-dimensional conductor, but works as a relevant gap function in quasi-one-dimensional conductors with slight interchain transfer integrals. Even when the Fermi surface is composed of small pockets, the gap function is obtained supposing a globally connected elliptical Fermi surface. In such a case, we have to connect the second energy band in the second Brillouin zone. The periodicity of the resulting gap function is larger than the first Brillouin zone. This is because the susceptibility has peaks at 2kF, where the periodicity has to be twice the size of the global Fermi surface. In general, periodicity of gap function corresponds to one electron or two molecules in the real space. In the κ-phase, two axes are nonequivalent, but the exact dx2 - y2 symmetry is maintained because the diagonal transfer integral introduced to a square lattice is oriented to the node direction of the dx2 - y2 wave. By contrast, the θ-phase gap function shows considerable anisotropy because a quarter-filled square lattice has a different dxy symmetry.

Using an Expedition Storyline, Baseline Data, Multiple Partnerships and a Varied Outreach Strategy to Engage Diverse Audiences in Geoscience Discourse: A Case Study on the Rio Maranon, Peru

Science.gov (United States)

Hill, A. F.; Goode, J. R.; Kramer, N. R.

2016-12-01

Growing energy demands in mountain regions motivate hydropower development on remote rivers previously not pursued due to difficult access and challenging terrain. These same physical factors have in part resulted in a dearth of data needed to understand these important water resources and the river systems as a whole. Resource management decisions not founded on data-driven science can not evaluate river system sustainability; decisions regarding the fate of globally important environmental resources without public awareness and discourse are missed opportunities to leverage international perspectives and lessons learned on the process. In the summer of 2015, we launched a 620 km, 30-day river expedition on the headwater stem of the Amazon River, Peru's Rio Maranon, to collect a baseline dataset as a start to filling this data gap on this river under threat from major hydropower development. We conducted a longitudinal characterization from Rio Maranon's Peruvian Andes headwaters to its lower lying Amazon jungle basin including continuous data collection on water quality, source water isotopes and invertebrate samples. A central focus of this project included outreach to broad audiences for public awareness and conservation advocacy of this critical river corridor at risk of imminent disconnection across ecosystems from dams. Outreach strategies were multi-pronged to encompass different audiences, including: a short-format documentary film, publicly available online data, oral presentations, magazine articles, blog posts and a science-education childrens' book highlighting both the adventure of the expedition and the female-dominated science team. Initiating non-traditional partnerships has been a key component of the project success given the minimal budget, including continuing partnerships with National Geographic, the Natural History Museum of Peru, Adventurers for Science and Conservation, Sierra Rios recreational river outfitter, Maranon Waterkeeper and the

Development of an abort gap monitor for high-energy proton rings

International Nuclear Information System (INIS)

Beche, Jean-Francois; Byrd, John; De Santis, Stefano; Denes, Peter; Placidi, Massimo; Turner, William; Zolotorev, Max

2004-01-01

The fill pattern in proton synchrotrons usually features an empty gap, longer than the abort kicker raise time, for machine protection. This gap is referred to as the ''abort gap'' and any particles, which may accumulate in it due to injection errors and diffusion between RF buckets, would be lost inside the ring, rather than in the beam dump, during the kicker firing. In large proton rings, due to the high energies involved, it is vital to monitor the build up of charges in the abort gap with a high sensitivity. We present a study of an abort gap monitor based on a photomultiplier with a gated microchannel plate, which would allow for detecting low charge densities by monitoring the synchrotron radiation emitted. We show results of beam test experiments at the Advanced Light Source using a Hamamatsu 5916U MCP-PMT and compare them to the specifications for the Large Hadron Collider

Development of an Abort Gap Monitor for High-Energy Proton Rings

International Nuclear Information System (INIS)

Beche, J.-F.; Byrd, J.; De Santis, S.; Denes, P.; Placidi, M.; Turner, W.; Zolotorev, M.

2004-01-01

The fill pattern in proton synchrotrons usually features an empty gap, longer than the abort kicker raise time, for machine protection. This gap is referred to as the 'abort gap', and any particles, which may accumulate in it due to injection errors and diffusion between RF buckets, would be lost inside the ring, rather than in the beam dump, during the kicker firing. In large proton rings, due to the high energies involved, it is vital to monitor the build up of charges in the abort gap with a high sensitivity. We present a study of an abort gap monitor based on a photomultiplier with a gated microchannel plate, which would allow for detecting low charge densities by monitoring the synchrotron radiation emitted. We show results of beam test experiments at the Advanced Light Source using a Hamamatsu 5916U MCP-PMT and compare them to the specifications for the Large Hadron Collider

Minding the gap

Directory of Open Access Journals (Sweden)

Mia Carlberg

2013-12-01

Full Text Available The plan for the Round table session was to focus on organizational and social/cultural differences between librarians and faculty with the aim to increase our awareness of the differences when we try to find ways to cooperate within the academy or school. This may help us to sort things out, experience acceptance and take adequate actions, saving energy and perhaps be less frustrated.  The questions that the workshop addressed were: What is in the gap between librarians and faculty when dealing with information literacy? How can we fill the gap? Participants discussed this in detail with the aim of together finding ways to understand it better and make it possible to find ways to fill this gap. By defining it and thereby making it easier to work out a strategy for future action to improve the teaching of information literacy, including listing possible, impossible or nearly impossible ways. The springboard to the discussion was extracted from some projects that the workshop leader has been engaged in since 2009. The first example is a research circle where Uppsala University Library used action research to observe and understand the process when we had the opportunity to implement information literacy classes with progression in an undergraduate program. What worked well? What did not? Why? This work was described together with other examples from Uppsala University to an international panel working with quality issues. What did they think of our work? May this change the ways we are working? How? Another example is an ongoing joint project where librarians and faculty members are trying to define ways to increase the cooperation between the library and faculty and make this cooperation sustainable. Recent experience from this was brought to the discussion.   There are an overwhelming number of papers written in this field. A few papers have inspired these ideas. One article in particular: Christiansen, L., Stombler, M. & Thaxton, L. (2004. A

Filling the gap. Human cranial remains from Gombore II (Melka Kunture, Ethiopia; ca. 850 ka) and the origin of Homo heidelbergensis.

Science.gov (United States)

Profico, Antonio; Di Vincenzo, Fabio; Gagliardi, Lorenza; Piperno, Marcello; Manzi, Giorgio

2016-06-20

African archaic humans dated to around 1,0 Ma share morphological affinities with Homo ergaster and appear distinct in cranio-dental morphology from those of the Middle Pleistocene that are referred to Homo heidelbergensis. This observation suggests a taxonomic and phylogenetic discontinuity in Africa that ranges across the Matuyama/Brunhes reversal (780 ka). Yet, the fossil record between roughly 900 and 600 ka is notoriously poor. In this context, the Early Stone Age site of Gombore II, in the Melka Kunture formation (Upper Awash, Ethiopia), provides a privileged case-study. In the Acheulean layer of Gombore II, somewhat more recent than 875 ±10 ka, two large cranial fragments were discovered in 1973 and 1975 respectively: a partial left parietal (Melka Kunture 1) and a right portion of the frontal bone (Melka Kunture 2), which probably belonged to the same cranium. We present here the first detailed description and computer-assisted reconstruction of the morphology of the cranial vault pertaining to these fossil fragments. Our analysis suggest that the human fossil specimen from Gombore II fills a phenetic gap between Homo ergaster and Homo heidelbergensis. This appears in agreement with the chronology of such a partial cranial vault, which therefore represents at present one of the best available candidates (if any) for the origin of Homo heidelbergensis in Africa.

Identifying the morphologies of gas hydrate distribution using P-wave velocity and density: a test from the GMGS2 expedition in the South China Sea

Science.gov (United States)

Liu, Tao; Liu, Xuewei

2018-06-01

Pore-filling and fracture-filling are two basic distribution morphologies of gas hydrates in nature. A clear knowledge of gas hydrate morphology is important for better resource evaluation and exploitation. Improper exploitation may cause seafloor instability and exacerbate the greenhouse effect. To identify the gas hydrate morphologies in sediments, we made a thorough analysis of the characteristics of gas hydrate bearing sediments (GHBS) based on rock physics modeling. With the accumulation of gas hydrate in sediments, both the velocities of two types of GHBS increase, and their densities decrease. Therefore, these two morphologies cannot be differentiated only by velocity or density. After a series of tests, we found the attribute ρ {{V}{{P}}}0.5 as a function of hydrate concentration show opposite trends for these two morphologies due to their different formation mechanisms. The morphology of gas hydrate can thus be identified by comparing the measured ρ {{V}{{P}}}0.5 with its background value, which means the ρ {{V}{{P}}}0.5 of the hydrate-free sediments. In 2013, China’s second gas hydrate expedition was conducted by Guangzhou Marine Geologic Survey to explore gas hydrate resources in the northern South China Sea, and both two hydrate morphologies were recovered. We applied this method to three sites, which include two pore-filling and three fracture-filling hydrate layers. The data points, that agree with the actual situations, account for 72% and 82% of the total for the two pore-filling hydrate layers, respectively, and 86%, 74%, and 69% for the three fracture-filling hydrate layers, respectively.

Developing a Gap Taxonomy to Address Crew Health Risks in NASA's Human Research Program

Science.gov (United States)

Kundrot, Craig E.; Edwards, J. Michelle

2009-01-01

The mission of NASA's Human Research Program (HRP) is to understand and reduce the risk to crew health and performance in exploration missions. The HRP addresses 27 specific risks by identifying and then filling gaps in understanding the risks and in the ability to disposition the risks. The primary bases for identifying gaps have been past experience and requirements definition. This approach has been very effective in identifying some important, relevant gaps, but may be inadequate for identifying gaps outside the past experience base. We are exploring the use of a gap taxonomy as a comprehensive, underlying conceptual framework that allows a more systematic identification of gaps. The taxonomy is based on these stages in medical care: prediction, prevention, detection/diagnosis, treatment, monitoring, rehabilitation, and lifetime surveillance. This gap taxonomy approach identifies new gaps in HRP health risks. Many of the new gaps suggest risk reduction approaches that are more cost effective than present approaches. A major benefit of the gap taxonomy approach is to identify new, economical approaches that reduce the likelihood and/or consequence of a risk.

Bridging the semantic gap in sports

Science.gov (United States)

Li, Baoxin; Errico, James; Pan, Hao; Sezan, M. Ibrahim

2003-01-01

One of the major challenges facing current media management systems and the related applications is the so-called "semantic gap" between the rich meaning that a user desires and the shallowness of the content descriptions that are automatically extracted from the media. In this paper, we address the problem of bridging this gap in the sports domain. We propose a general framework for indexing and summarizing sports broadcast programs. The framework is based on a high-level model of sports broadcast video using the concept of an event, defined according to domain-specific knowledge for different types of sports. Within this general framework, we develop automatic event detection algorithms that are based on automatic analysis of the visual and aural signals in the media. We have successfully applied the event detection algorithms to different types of sports including American football, baseball, Japanese sumo wrestling, and soccer. Event modeling and detection contribute to the reduction of the semantic gap by providing rudimentary semantic information obtained through media analysis. We further propose a novel approach, which makes use of independently generated rich textual metadata, to fill the gap completely through synchronization of the information-laden textual data with the basic event segments. An MPEG-7 compliant prototype browsing system has been implemented to demonstrate semantic retrieval and summarization of sports video.

Dive Activities for Expedition to the Deep Slope 2007 - Office of Ocean Exploration

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Information about dive activities were recorded by personnel during the "Expedition to the Deep Slope 2007" expedition, June 4 through July 6, 2007. Additional...

Dive Activities for Expedition to the Deep Slope 2006 - Office of Ocean Exploration

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Information about dive activities were recorded by personnel during the "Expedition to the Deep Slope 2006" expedition, May 7 through June 2, 2006. Additional...

42 CFR 405.1202 - Expedited determination procedures.

Science.gov (United States)

2010-10-01

... Reconsiderations of Provider Service Terminations, and Procedures for Inpatient Hospital Discharges § 405.1202... exercise the right to an expedited determination must submit a request for a determination to the QIO in...

Human intracranial recordings link suppressed transients rather than 'filling-in' to perceptual continuity across blinks.

Science.gov (United States)

Golan, Tal; Davidesco, Ido; Meshulam, Meir; Groppe, David M; Mégevand, Pierre; Yeagle, Erin M; Goldfinger, Matthew S; Harel, Michal; Melloni, Lucia; Schroeder, Charles E; Deouell, Leon Y; Mehta, Ashesh D; Malach, Rafael

2016-09-29

We hardly notice our eye blinks, yet an externally generated retinal interruption of a similar duration is perceptually salient. We examined the neural correlates of this perceptual distinction using intracranially measured ECoG signals from the human visual cortex in 14 patients. In early visual areas (V1 and V2), the disappearance of the stimulus due to either invisible blinks or salient blank video frames ('gaps') led to a similar drop in activity level, followed by a positive overshoot beyond baseline, triggered by stimulus reappearance. Ascending the visual hierarchy, the reappearance-related overshoot gradually subsided for blinks but not for gaps. By contrast, the disappearance-related drop did not follow the perceptual distinction - it was actually slightly more pronounced for blinks than for gaps. These findings suggest that blinks' limited visibility compared with gaps is correlated with suppression of blink-related visual activity transients, rather than with "filling-in" of the occluded content during blinks.

Riverland expedited response action assessment

International Nuclear Information System (INIS)

1995-06-01

The US Environmental Protection Agency (EPA) and Washington Department of Ecology (Ecology) recommended that the US Department of Energy (DOE) prepare an expedited response action (ERA) for the Riverland Railroad Car Wash Pit (located in the Riverland Rail Yard) and the 600 Area Army Munitions Burial Site (Munitions Cache). This assessment report details the actions taken to complete the Riverland ERA

Filling the Gondwanan gap

DEFF Research Database (Denmark)

Cole, Selina R.; Ausich, William I.; Colmenar Lallena, Jorge

2017-01-01

., and Ambonacrinus decorus n. gen. n. Sp.; the monobathrid camerate Eopatelliocrinus hispaniensis n. Sp.; and the cladid Picassocrinus villasi n. gen. n. Sp. A new occurrence of Heviacrinus melendezi Gil Cid, Domínguez Alonso, and Silván Pobes, 1996 is also documented from the Castillejo Formation (Darriwilian......A diverse crinoid fauna is described from the Upper Ordovician (Katian) Fombuena Formation from the eastern Iberian Chains of Spain. New crinoids include the diplobathrid camerates Fombuenacrinus nodulus n. gen. n. Sp., Goyacrinus gutierrezi n. gen. n. Sp., Dalicrinus hammanni n. gen. n. Sp......, Middle Ordovician) from the eastern Iberian Chains of Spain. The Fombuena Formation comprises a Gondwanan crinoid assemblage from a high paleolatitude and has the highest crinoid diversity of any currently known Katian Gondwanan fauna. This assemblage is compared to other Katian age faunas around...

Influence of pellet-clad-gap-size on LWR fuel rod performance

International Nuclear Information System (INIS)

Brzoska, B.; Fuchs, H.P.; Garzarolli, F.; Manzel, R.

1979-01-01

The as-fabricated pellet-clad-gap size varies due to fabricational tolerances of the cladding inner diameter and the pellet outer diameter. The consequences of these variations on the fuel rod behaviour are analyzed using the KWU fuel rod code CARO. The code predictions are compared with experimental results of special pathfinder test fuel rods irradiated in the OBRIGHEIM nuclear power plant. These test fuel rods include gap sizer in the range of 140 μm to 270 μm, prepressurization between 13 bar to 36 bar and Helium and Argon fill gases irradiated up to a local burnup of 35 MWd/kg(U). Post irradiation examination were performed at different burnups. CARC calculations have been performed with special emphasis in cladding creep down, fission gas release and pellet clad gap closure. (orig.)

76 FR 2930 - International Product Change-Global Expedited Package Services-Non- Published Rates

Science.gov (United States)

2011-01-18

... POSTAL SERVICE International Product Change--Global Expedited Package Services-- Non- Published... request with the Postal Regulatory Commission to add Global Expedited Package Services-- Non-Published...--Non-Published Rates, to the Competitive Products List, and Notice of Filing (Under Seal) the Enabling...

AUTOMATIC ROAD GAP DETECTION USING FUZZY INFERENCE SYSTEM

Directory of Open Access Journals (Sweden)

S. Hashemi

2012-09-01

Full Text Available Automatic feature extraction from aerial and satellite images is a high-level data processing which is still one of the most important research topics of the field. In this area, most of the researches are focused on the early step of road detection, where road tracking methods, morphological analysis, dynamic programming and snakes, multi-scale and multi-resolution methods, stereoscopic and multi-temporal analysis, hyper spectral experiments, are some of the mature methods in this field. Although most researches are focused on detection algorithms, none of them can extract road network perfectly. On the other hand, post processing algorithms accentuated on the refining of road detection results, are not developed as well. In this article, the main is to design an intelligent method to detect and compensate road gaps remained on the early result of road detection algorithms. The proposed algorithm consists of five main steps as follow: 1 Short gap coverage: In this step, a multi-scale morphological is designed that covers short gaps in a hierarchical scheme. 2 Long gap detection: In this step, the long gaps, could not be covered in the previous stage, are detected using a fuzzy inference system. for this reason, a knowledge base consisting of some expert rules are designed which are fired on some gap candidates of the road detection results. 3 Long gap coverage: In this stage, detected long gaps are compensated by two strategies of linear and polynomials for this reason, shorter gaps are filled by line fitting while longer ones are compensated by polynomials.4 Accuracy assessment: In order to evaluate the obtained results, some accuracy assessment criteria are proposed. These criteria are obtained by comparing the obtained results with truly compensated ones produced by a human expert. The complete evaluation of the obtained results whit their technical discussions are the materials of the full paper.

Automatic Road Gap Detection Using Fuzzy Inference System

Science.gov (United States)

Hashemi, S.; Valadan Zoej, M. J.; Mokhtarzadeh, M.

2011-09-01

Automatic feature extraction from aerial and satellite images is a high-level data processing which is still one of the most important research topics of the field. In this area, most of the researches are focused on the early step of road detection, where road tracking methods, morphological analysis, dynamic programming and snakes, multi-scale and multi-resolution methods, stereoscopic and multi-temporal analysis, hyper spectral experiments, are some of the mature methods in this field. Although most researches are focused on detection algorithms, none of them can extract road network perfectly. On the other hand, post processing algorithms accentuated on the refining of road detection results, are not developed as well. In this article, the main is to design an intelligent method to detect and compensate road gaps remained on the early result of road detection algorithms. The proposed algorithm consists of five main steps as follow: 1) Short gap coverage: In this step, a multi-scale morphological is designed that covers short gaps in a hierarchical scheme. 2) Long gap detection: In this step, the long gaps, could not be covered in the previous stage, are detected using a fuzzy inference system. for this reason, a knowledge base consisting of some expert rules are designed which are fired on some gap candidates of the road detection results. 3) Long gap coverage: In this stage, detected long gaps are compensated by two strategies of linear and polynomials for this reason, shorter gaps are filled by line fitting while longer ones are compensated by polynomials.4) Accuracy assessment: In order to evaluate the obtained results, some accuracy assessment criteria are proposed. These criteria are obtained by comparing the obtained results with truly compensated ones produced by a human expert. The complete evaluation of the obtained results whit their technical discussions are the materials of the full paper.

Development of an abort gap monitor for the large hadron collider

International Nuclear Information System (INIS)

Beche, J.-F.; Byrd, J.; De Santis, S.; Placidi, M.; Turner, W.; Zolotorev, M.

2004-01-01

The Large Hadron Collider (LHC), presently under construction at CERN, requires monitoring the parasitic charge in the 3.3ms long gap in the machine fill structure. This gap, referred to as the abort gap, corresponds to the raise time of the abort kickers magnets. Any circulating particle present in the abort gap at the time of the kickers firing is lost inside the ring, rather than in the beam dump, and can potentially damage a number of the LHC components. CERN specifications indicate a linear density of 6 x 106 protons over a 100 ns interval as the maximum charge safely allowed to accumulate in the abort gap at 7 TeV. We present a study of an abort gap monitor, based on a photomultiplier tube with a gated microchannel plate, which would allow for detecting such low charge densities by monitoring the synchrotron radiation emitted in the dedicated diagnostics port. We show results of beam test experiments at the Advanced Light Source (ALS) using a Hamamatsu 5961U MCP-PMT, which indicate that such an instrument has the required sensitivity to meet LHC specifications

Children's Perception of Gap Affordances: Bicycling Across Traffic-Filled Intersections in an Immersive Virtual Environment

Science.gov (United States)

Plumert, Jodie M.; Kearney, Joseph K.; Cremer, James F.

2004-01-01

This study examined gap choices and crossing behavior in children and adults using an immersive, interactive bicycling simulator. Ten- and 12-year-olds and adults rode a bicycle mounted on a stationary trainer through a virtual environment consisting of a street with 6 intersections. Participants faced continuous cross traffic traveling at 25mph…

U.S., U.S.S.R. Marine Expedition

Science.gov (United States)

Wainger, Lisa A.

An historic expedition involving U.S. and U.S.S.R. scientists may open a new era of cooperation in marine research. A University of California, San Diego/Scripps Institution of Oceanography ship carrying a team that includes two Soviet scientists is on an expedition that will take the R/V Thomas Washington into the Exclusive Economic Zone (EEZ) of the U.S.S.R. For the first time in a decade a U.S. research vessel has been given permission to operate in the Soviet Union's EEZ, according to Department of State representative Tom Cocke, who worked with Scripps on this project. The ship will also operate in the U.S. EEZ and international waters.

Assessment of corrosion and stress corrosion cracking results for SCWR development: gaps and needs

International Nuclear Information System (INIS)

Zheng, W.; Gu, G.; Guzonas, D.; Luo, J.

2010-01-01

International efforts on materials evaluation for the development of supercritical water-cooled reactors (SCWRs) have produced a considerable amount of corrosion test data in the open literature. These data are helping guide the selection of candidate alloys for further, longer-term evaluation. As continuing research in this area advances, the gaps and limitations in the published data are being identified. These gaps can be seen in several areas, including the test environment and the severity of test condition as compared with reactor service/operating condition. While some of these gaps can be filled readily with existing capabilities, others require major investments in advanced test facilities. (author)

30 CFR 817.72 - Disposal of excess spoil: Valley fill/head-of-hollow fills.

Science.gov (United States)

2010-07-01

... STANDARDS-UNDERGROUND MINING ACTIVITIES § 817.72 Disposal of excess spoil: Valley fill/head-of-hollow fills.... Uncontrolled surface drainage may not be directed over the outslope of the fill. (2) Runoff from areas above the fill and runoff from the surface of the fill shall be diverted into stabilized diversion channels...

Sodium fill of FFTF

International Nuclear Information System (INIS)

Waldo, J.B.; Greenwell, R.K.; Keasling, T.A.; Collins, J.R.; Klos, D.B.

1980-02-01

With construction of the Fast Flux Test Facility (FFTF) completed, the first major objective in the startup program was to fill the sodium systems. A sodium fill sequence was developed to match construction completion, and as systems became available, they were inerted, preheated, and filled with sodium. The secondary sodium systems were filled first while dry refueling system testing was in progress in the reactor vessel. The reactor vessel and the primary loops were filled last. This paper describes the methods used and some of the key results achieved for this major FFTF objective

REFLECTIONS ON THE REPERTORY IN MUSIC EDUCATION: FILLING THE GAP WITH CONTEMPORARY MUSIC

Directory of Open Access Journals (Sweden)

Érica Dias Gomes

2014-04-01

Full Text Available Formal musical education in Brasil has been focusing common practice period repertory on all education segments. This research aims to reflect about this gap on musical education’s repertory, especially regarding contemporary music. Therefore, theoretical review was carried out in order to present some facts on music education’s history that have contributed to this repertory consolidation. Finally some notes about both contemporary music and life are exposed as argument for the importance of discussing these relations at school. Lastly this paper defends contemporary music as a significant issue for the purpose of develops musicality and relates students’ everyday life to music education.

78 FR 1277 - International Product Change-Global Expedited Package Services-Non-Published Rates

Science.gov (United States)

2013-01-08

... POSTAL SERVICE International Product Change--Global Expedited Package Services-- Non-Published...-- Non-Published Rates 4 (GEPS-NPR 4) to the Competitive Products List. DATES: Effective date: January 8... add Global Expedited Package Services-- Non-Published Rates 4 (GEPS-NPR 4) to the Competitive Products...

Zoological results of the Dutch New Guinea expedition, 1939. No. 51) The Birds

NARCIS (Netherlands)

Junge, G.C.A.

1953-01-01

The present paper is the report on a collection of birds brought together during the expedition of the "Koninklijk Nederlandsch Aardrijkskundig Genootschap" to the Wissel Lake area in 1939. The zoologist of this expedition Prof. Dr. H. Boschma collected with the assistance of two mantris of the

About Dental Amalgam Fillings

Science.gov (United States)

... and Medical Procedures Dental Devices Dental Amalgam About Dental Amalgam Fillings Share Tweet Linkedin Pin it More ... should I have my fillings removed? What is dental amalgam? Dental amalgam is a dental filling material ...

The expediting resolutions of the Federal Government

International Nuclear Information System (INIS)

Anon.

1981-01-01

Even before the Third Update of their Energy Programme was dismissed the Federal Government had decreed ten measures for expediting the licensing procedures for nuclear power plants in October. The statements of politicians, experts and a journalist are given. (orig./UA) [de

Effect of a Prolonged Altitude Expedition on Glucose Tolerance and Abdominal Fatness

Science.gov (United States)

Chen, Mu-Tsung; Lee, Wen-Chih; Chen, Shih-Chang; Chen, Chiu-Chou; Chen, Chung-Yu; Lee, Shin-Da; Jensen, Jorgen; Kuo, Chia-Hua

2010-01-01

In the present study, we investigated the effect of a long-term mountain expedition on glucose tolerance and insulin action. Twelve registered mountaineers ages 31 years (SD = 1.1) participated in a 25-day expedition at a 2,200-3,800-m altitude with an average duration of 8 hr per day. Arterial oxygen saturation (SaO[subscript 2]) was…

Professional organisation profile: a faculty of expedition and wilderness medicine for Australasia.

Science.gov (United States)

Leggat, Peter A; Shaw, Marc T M

2012-05-01

A profile of the recent genesis of the Sub-Faculty of Expedition Medicine into a Faculty of Expedition and Wilderness Medicine of The Australasian College of Tropical Medicine is presented. Information is given on aims, structure, professional grades of membership, and the various activities of the Faculty, including publications and scientific meetings. Copyright © 2012 Elsevier Ltd. All rights reserved.

Contamination tracer testing with seabed drills: IODP Expedition 357

Science.gov (United States)

Orcutt, Beth N.; Bergenthal, Markus; Freudenthal, Tim; Smith, David; Lilley, Marvin D.; Schnieders, Luzie; Green, Sophie; Früh-Green, Gretchen L.

2017-11-01

IODP Expedition 357 utilized seabed drills for the first time in the history of the ocean drilling program, with the aim of collecting intact sequences of shallow mantle core from the Atlantis Massif to examine serpentinization processes and the deep biosphere. This novel drilling approach required the development of a new remote seafloor system for delivering synthetic tracers during drilling to assess for possible sample contamination. Here, we describe this new tracer delivery system, assess the performance of the system during the expedition, provide an overview of the quality of the core samples collected for deep biosphere investigations based on tracer concentrations, and make recommendations for future applications of the system.

STS-102 Expedition 2 Increment and Science Briefing

Science.gov (United States)

2001-01-01

Merri Sanchez, Expedition 2 Increment Manager, John Uri, Increment Scientist, and Lybrease Woodard, Lead Payload Operations Director, give an overview of the upcoming activities and objectives of the Expedition 2's (E2's) mission in this prelaunch press conference. Ms. Sanchez describes the crew rotation of Expedition 1 to E2, the timeline E2 will follow during their stay on the International Space Station (ISS), and the various flights going to the ISS and what each will bring to ISS. Mr. Uri gives details on the on-board experiments that will take place on the ISS in the fields of microgravity research, commercial, earth, life, and space sciences (such as radiation characterization, H-reflex, colloids formation and interaction, protein crystal growth, plant growth, fermentation in microgravity, etc.). He also gives details on the scientific facilities to be used (laboratory racks and equipment such as the human torso facsimile or 'phantom torso'). Ms. Woodard gives an overview of Marshall Flight Center's role in the mission. Computerized simulations show the installation of the Space Station Remote Manipulator System (SSRMS) onto the ISS and the installation of the airlock using SSRMS. Live footage shows the interior of the ISS, including crew living quarters, the Progress Module, and the Destiny Laboratory. The three then answer questions from the press.

Formation of moon induced gaps in dense planetary rings

Science.gov (United States)

Grätz, F.; Seiß, M.; Spahn, F.

2017-09-01

Recent works have shown that bodies embedded in planetary rings create S-shaped density modula- tions called propellers if their mass deceeds a certain threshold or cause a gap around the entire circumference of the disc if the embedded bodies mass exceeds it. Two counteracting physical processes govern the dynamics and determine what structure is created: The gravitational disturber excerts a torque on nearby disc particles, sweeping them away from itself on both sides thus depleting the discs density and forming a gap. Diffusive spreading of the disc material due to collisions counteracts the gravitational scattering and has the tendency to fill the gap. We develop a nonlinear diffusion model that accounts for those two counteracting processes and describes the azimutally averaged surface density profile an embedded moon creates in planetary rings. The gaps width depends on the moons mass, its radial position and the rings viscosity allowing us to estimate the rings viscosity in the vicinity of the Encke and Keeler gap in Saturns A-Ring and compare it to previous measurements. We show that for the Keeler gap the time derivative of the semi-major axis as derived by Goldreich and Tremaine 1980 is underestimated yielding an underestimated viscosity for the ring. We therefore derive a corrected expression for said time derivative by fitting the solutions of Hill's equations for an ensemble of test particles. Furthermore we estimate the masses for potentionally unseen moonlets in the C-Ring and Cassini division.

Material gap membrane distillation: A new design for water vapor flux enhancement

KAUST Repository

Francis, Lijo

2013-08-19

A new module design for membrane distillation, namely material gap membrane distillation (MGMD), for seawater desalination has been proposed and successfully tested. It has been observed that employing appropriate materials between the membrane and the condensation plate in an air gap membrane distillation (AGMD) module enhanced the water vapor flux significantly. An increase in the water vapor flux of about 200-800% was observed by filling the gap with sand and DI water at various feed water temperatures. However, insulating materials such as polypropylene and polyurethane have no effect on the water vapor flux. The influence of material thickness and characteristics has also been investigated in this study. An increase in the water gap width from 9. mm to 13. mm increases the water vapor flux. An investigation on an AGMD and MGMD performance comparison, carried out using two different commercial membranes provided by different manufacturers, is also reported in this paper. © 2013 Elsevier B.V.

Hydrogen Filling Station

Energy Technology Data Exchange (ETDEWEB)

Boehm, Robert F; Sabacky, Bruce; Anderson II, Everett B; Haberman, David; Al-Hassin, Mowafak; He, Xiaoming; Morriseau, Brian

2010-02-24

future. Project partners also conducted a workshop on hydrogen safety and permitting. This provided an opportunity for the various permitting agencies and end users to gather to share experiences and knowledge. As a result of this workshop, the permitting process for the hydrogen filling station on the Las Vegas Valley Water District’s land was done more efficiently and those who would be responsible for the operation were better educated on the safety and reliability of hydrogen production and storage. The lessons learned in permitting the filling station and conducting this workshop provided a basis for future hydrogen projects in the region. Continuing efforts to increase the working pressure of electrolysis and efficiency have been pursued. Research was also performed on improving the cost, efficiency and durability of Proton Exchange Membrane (PEM) hydrogen technology. Research elements focused upon PEM membranes, electrodes/catalysts, membrane-electrode assemblies, seals, bipolar plates, utilization of renewable power, reliability issues, scale, and advanced conversion topics. Additionally, direct solar-to-hydrogen conversion research to demonstrate stable and efficient photoelectrochemistry (PEC) hydrogen production systems based on a number of optional concepts was performed. Candidate PEC concepts included technical obstacles such as inefficient photocatalysis, inadequate photocurrent due to non-optimal material band gap energies, rapid electron-hole recombination, reduced hole mobility and diminished operational lifetimes of surface materials exposed to electrolytes. Project Objective 1: Design, build, operate hydrogen filling station Project Objective 2: Perform research and development for utilizing solar technologies on the hydrogen filling station and convert two utility vehicles for use by the station operators Project Objective 3: Increase capacity of hydrogen filling station; add additional vehicle; conduct safety workshop; develop a roadmap for

From the Milky Way to differing galaxy environments: filling critical gaps in our knowledge of star formation and its interplay with dust, and in stellar and galaxy evolution.

Science.gov (United States)

Bianchi, Luciana

2018-01-01

Rest-frame UV, uniquely sensitive to luminous, short-lived hot massive stars, trace and age-date star formation across galaxies, and is very sensitive to dust, whose properties and presence are closely connected to star formation.With wide f-o-v and deep sensitivity in two broad filters,FUV and NUV,GALEX delivered the first comprehensive UV view of large nearby galaxies, and of the universe to z~2 (e.g.,Bianchi 2014 ApSS 354,103), detected star formation at the lowest rates, in environments where it was not seen before and not expected (e.g. Bianchi 2011 ApSS 335,51; Thilker+2009 Nature 457,990;2007 ApJS 173,538), triggering a new era of investigations with HST and large ground-based telescopes. New instrument technology and modeling capabilities make it now possible and compelling to solve standing issues. The scant UV filters available (esp. FUV) and the wide gap in resolution and f-o-v between GALEX and HST leaves old and new questions open. A chief limitation is degeneracies between physical parameters of stellar populations (age/SFR) and hot stars, and dust (e.g. Bianchi+ 2014 JASR 53,928).We show sample model simulations for filter optimization to provide critical measurements for the science objectives. We also demonstrate how adequate FUV+NUV filters, and resolution, allow us to move from speculative interpretation of UV data to unbiased physical characterization of young stellar populations and dust, using new data from UVIT, which, though smaller than CETUS, has better resolution and filter coverage than GALEX.Also, our understanding of galaxy chemical enrichment is limited by critical gaps in stellar evolution; GALEX surveys enabled the first unbiased census of the Milky Way hot-WD population (Bianchi+2011 MNRAS, 411,2770), which we complement with SDSS, Pan-STARRS, and Gaia data to fill such gaps (Bianchi et al.2018, ApSS). Such objects in CETUS fields (deeper exposures, more filters, and the first UV MOS) will be much better characterized, enabling

Effect of Flapless Immediate Implantation and Filling the Buccal Gap with Xenograft Material on the Buccal Bone Level: A Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

Mojgan Paknejad

2017-12-01

Full Text Available Objectives: Following tooth extraction, soft and hard tissue alterations occur; Different factors can affect this process. The objective of this study was to determine the effect of gap filling on buccal alveolar crestal bone level after immediate implant placement after 4- to 6-month observation period.Materials and Methods: This   randomized clinical trial was performed on 20 patients (mean age of 38.8 years requiring tooth extraction in a total of 27 areas in the anterior maxilla. The treatment strategy was as follows: atraumatic flapless tooth extraction, implant placement, insertion of a graft (test group or no material (control group between the implant and the socket wall, connection healing abutment placement and suturing the area. Clinical and cone beam computed tomographic examinations were performed before implant placement (baseline, 24 hours after surgery and 4-6 months (T2 after implant placement, to assess the buccal plate height (BH and implant complications.Results: After 4 months of healing, a reduction in different bone measurements was noticed in the two groups. No statistically significant differences were assessed in bone height measurements between the test and control groups at different time points. The study demonstrated that immediate implantation resulted in 1.30 and 1.66 mm reduction in buccal bone plate in the test and control groups, respectively.Conclusions: The study demonstrated that immediate implantation in the extraction socket together with xenograft failed to prevent bone resorption.

Report on the Dutch expedition to observe the 1973 June 30 solar eclipse. II

International Nuclear Information System (INIS)

Houtgast, J.; Namba, O.

1979-01-01

This paper continues to report the Dutch expedition to Atar, Mauritania, to observe the total solar eclipse of June 30, 1973. The purpose of this expedition was to obtain spectra from the transition region photosphere-chromosphere with high spectral and time resolution. (Auth.)

Educational expeditions - et norsk perspektiv

Directory of Open Access Journals (Sweden)

Andre Horgen

2015-06-01

Full Text Available AbstractThe topic of this article is the Norwegian concept of “friluftsliv” (outdoor life, used as a pedagogical tool to support personal growth. While supporting personal growth appears to be a central pedagogical strategy within Anglo-American and British youth expeditions and adventure programming, this does not appear to be case in the Norwegian outdoor tradition. My research question is: Do Norwegian Outdoor Education students experience a learning outcome related to personal growth, and to their abilities as leaders/mentors, during ski expeditions? I have collected data through a three-year period, after three ski expeditions with Outdoor Education students from an outdoor bachelor-programme at Telemark University College.The students have given written answers to questions regarding personal growth in which several informants’ express thoughts about experiences related to “self” and “identity”. They reflect upon experiences related to “mastering” and “performing”, to acceptance of their own strengths and weaknesses, and about developing self-confidence. They also reflect upon learning outcomes related to interpersonal relations and abilities, self-control, communication and caregiving. The informants have experienced, as leaders/mentors, that it is important to be able to, to “read” situations, to make good assessments of the situations, and to make good decisions related to the situations. As a follow up to this, the informants highlight the importance of being aware of each individual in the group, the importance of encouragement, being positive and caregiving. This study has shown that ski expeditions in “a Norwegian tradition” may have a potential when it comes to encouraging reflections related to personal growth and leadership abilities. Hopefully this study can contribute to increased awareness of the pedagogical potential, for personal growth, within the Norwegian concept of �

Postirradiation examination data report for gap conductance test series. Test GC 2-1

International Nuclear Information System (INIS)

Murdock, B.A.

1978-02-01

The results of the postirradiation examination of four boiling water reactor type, zircaloy-clad, UO 2 -fueled rods tested in the Power Burst Facility are discussed. These rods were employed in Gap Conductance Test GC 2-1 which was performed to obtain experimental data from which test fuel rod gap conductance values could be determined by both the steady state ∫kdT and the power oscillation methods. The postirradiation examination results provided in the document will aid in interpreting the experimental data obtained during Test GC 2-1 and in evaluating the effect of fuel behavior on the fuel rod thermal response and interpreted gap conductances. Fuel rod fill gas composition and pressure are discussed. Measurements of fuel pellet-cladding gap and fuel crack areas are presented. The fuel structure is analyzed. Test rod instrumentation and power profiles are examined to better evaluate the test conditions

Mechanism of photonic band gap, optical properties, tuning and applications

International Nuclear Information System (INIS)

Tiwari, A.; Johri, M.

2006-05-01

Mechanism of occurrence of Photonic Band Gap (PBG) is presented for 3-D structure using close packed face centered cubic lattice. Concepts and our work, specifically optical properties of 3-D photonic crystal, relative width, filling fraction, effective refractive index, alternative mechanism of photonic band gap scattering strength and dielectric contrast, effect of fluctuations and minimum refractive index contrast, are reported. The temperature tuning and anisotropy of nematic and ferroelectric liquid crystal infiltrated opal for different phase transitions are given. Effective dielectric constant with filling fraction using Maxwell Garnet theory (MG), multiple modified Maxwell Garnet (MMMG) and Effective Medium theory (EM) and results are compared with experiment to understand the occurrence of PBG. Our calculations of Lamb shifts including fluctuations are given and compared with those of literature values. We have also done band structure calculations including anisotropy and compared isotropic characteristic of liquid crystal. A possibility of lowest refractive index contrast useful for the fabrication of PBG is given. Our calculations for relative width as a function of refractive index contrast are reported and comparisons with existing theoretical and experimental optimal values are briefed. Applications of photonic crystals are summarized. The investigations conducted on PBG materials and reported here may pave the way for understanding the challenges in the field of PBG. (author)

IODP Expedition 360: Analyzing the Media Coverage of a High Profile Research Project

Science.gov (United States)

Kavanagh, L.; Martinez, A. O.; Burgio, M.; Zhang, J.; Expedition 360 Scientists, I.

2016-12-01

During Expedition 360 of the International Ocean Discovery Program (IODP), the JOIDES Resolution drilled 789 meters of lower crustal gabbro in the Southwest Indian Ocean. This hole began a multi-expedition project with the goal of one day drilling across the crust-mantle boundary for the first time. This simplified narrative of the research objectives struck a chord with media and the project received worldwide coverage in the form of over 50 stories with a total audience in the millions. This expedition is presented as a case study in science communication. A four-member education and outreach team onboard the ship acted as the point of contact for interested reporters. Major outlets that ran stories include the Australian Broadcasting Corporation, British Broadcasting Corporation, Boston Globe, Daily Express, Fox News, Nature, Smithsonian, and Chinese based Xinhua News Agency who sailed a reporter on the ship for the duration of the expedition. The majority of stories published provided accurate and favourable coverage of the project; however, a few contained critical errors and cast the expedition in a less positive light. Public reaction varied greatly depending on the article. Positive themes include interest in the scientific outcomes and encouragement of human exploration. Negative themes include the project being an inefficient use of money and a perceived risk of the drilling triggering an earthquake or volcano. Through a review of published articles and online comments, the successes and challenges faced by Expedition 360 are identified. Despite minimal preparation for media relations, the team successfully maintained a public profile while working in one of the most remote locations on Earth. Interviews were facilitated and videos, articles, and podcasts were produced onboard the ship. A simple, catchy narrative resulted in a large volume of coverage; however, this simplicity also formed the root of a number of misconceptions and issues of public concern.

Calanoid copepods of the International Indian Ocean Expedition

Digital Repository Service at National Institute of Oceanography (India)

Stephen, R.; Devi, K.S.; Meenakshikunjamma, P.P.; Gopalakrishnan, T.C.; Saraswathy, M.

The distribution of calanoid copepods is discussed based on the subsorted taxa of the International Indian Ocean Expedition samples. Of the 32 calanoid taxa only 17 groups were considered as significant components. The family Eycalanidae...

Optical study of the band structure of wurtzite GaP nanowires

KAUST Repository

Assali, S.

2016-07-25

We investigated the optical properties of wurtzite (WZ) GaP nanowires by performing photoluminescence (PL) and time-resolved PL measurements in the temperature range from 4 K to 300 K, together with atom probe tomography to identify residual impurities in the nanowires. At low temperature, the WZ GaP luminescence shows donor-acceptor pair emission at 2.115 eV and 2.088 eV, and Burstein-Moss band-filling continuum between 2.180 and 2.253 eV, resulting in a direct band gap above 2.170 eV. Sharp exciton α-β-γ lines are observed at 2.140–2.164–2.252 eV, respectively, showing clear differences in lifetime, presence of phonon replicas, and temperature-dependence. The excitonic nature of those peaks is critically discussed, leading to a direct band gap of ∼2.190 eV and to a resonant state associated with the γ-line ∼80 meV above the Γ8C conduction band edge.

Optical study of the band structure of wurtzite GaP nanowires

KAUST Repository

Assali, S.; Greil, J.; Zardo, I.; Belabbes, Abderrezak; de Moor, M. W. A.; Koelling, S.; Koenraad, P. M.; Bechstedt, F.; Bakkers, E. P. A. M.; Haverkort, J. E. M.

2016-01-01

We investigated the optical properties of wurtzite (WZ) GaP nanowires by performing photoluminescence (PL) and time-resolved PL measurements in the temperature range from 4 K to 300 K, together with atom probe tomography to identify residual impurities in the nanowires. At low temperature, the WZ GaP luminescence shows donor-acceptor pair emission at 2.115 eV and 2.088 eV, and Burstein-Moss band-filling continuum between 2.180 and 2.253 eV, resulting in a direct band gap above 2.170 eV. Sharp exciton α-β-γ lines are observed at 2.140–2.164–2.252 eV, respectively, showing clear differences in lifetime, presence of phonon replicas, and temperature-dependence. The excitonic nature of those peaks is critically discussed, leading to a direct band gap of ∼2.190 eV and to a resonant state associated with the γ-line ∼80 meV above the Γ8C conduction band edge.

Calculations on the effect of pellet filling on the rewetting of overheated nuclear reactor fuel pins

International Nuclear Information System (INIS)

Pearson, K.G.; Loveless, J.

1977-03-01

Numerical solutions of the rewetting equations are presented which show the effect of filler material and gas gap on the rate of rewetting of an overheated fuel pin. It is shown that taking the presence of the fuel into account can lead to a large reduction in the calculated rewetting speed compared with a calculation which neglects the presence of fuel. The effect is most marked in conditions where rewetting speeds tend to be already low, such as at high pin temperatures and low ambient pressure. A comparison is made between the predictions of the present method and experimental data obtained on zircaloy and stainless steel pins filled with magnesia and with boron nitride. In all cases filling the pins produced a large reduction in rewetting speed and the agreement between the calculated and measured effect was encouraging. It is concluded that the presence of the UO 2 pellet filling should be taken into account when calculating rewetting speeds in safety assessments. (author)

Evaluation of Root-End Resections Performed by Er, Cr: YSGG Laser with and without Placement of a Root-End Filling Material

Directory of Open Access Journals (Sweden)

John Sullivan

2009-01-01

Full Text Available Microleakage following root-end resections has a direct influence on the outcome of surgical endodontic procedures. This study compared the microleakage after root-end resections performed by the Er, Cr: YSGG laser or carbide burs with or without the placement of MTA, and evaluated the presence of microcracks and gaps at the interface of GP/MTA and the canal walls. Ninety single-rooted teeth were instrumented, obturated with GP and AH-Plus sealer, and divided into 3 experimental groups: (I root-end resections were performed with the laser and G6 tips (parameters: 4.5 w, 30 pps, 20% water and 50% air; (II Lindeman burs were used, without the placement of MTA; (III the burs were used followed by root-end fillings with MTA, and one control (IV of five unobturated roots resected with the burs. The samples were prepared for microleakage (=20 and SEM (=10 analysis. They were immersed in 1% methylene blue, decalcified, cleared, and evaluated for dye penetration (mm2 with the ImageJ software. Epoxy-resin replicas of the root-ends were analyzed by SEM for gaps (m2 and microcracks. Microleakage results were 0.518±1.059, 0.172±0.223, and 0.158±0.253, for the laser (I, no root-end filling (II, and MTA (III samples, respectively, (ANOVA =.02. The laser (7831.7±2329.2 and no root-end filling (7137.3±1400.7 samples presented gaps. Whereas, none was found in the MTA (ANOVA =.002. Microcracks were not observed. The MTA group demonstrated statistically less leakage and better adaptation to the canal walls when compared to the other groups. There was no correlation between the size of the gaps and the degree of microleakage.

Contamination tracer testing with seabed drills: IODP Expedition 357

Directory of Open Access Journals (Sweden)

B. N. Orcutt

2017-11-01

Full Text Available IODP Expedition 357 utilized seabed drills for the first time in the history of the ocean drilling program, with the aim of collecting intact sequences of shallow mantle core from the Atlantis Massif to examine serpentinization processes and the deep biosphere. This novel drilling approach required the development of a new remote seafloor system for delivering synthetic tracers during drilling to assess for possible sample contamination. Here, we describe this new tracer delivery system, assess the performance of the system during the expedition, provide an overview of the quality of the core samples collected for deep biosphere investigations based on tracer concentrations, and make recommendations for future applications of the system.

The gastropod Phorcus sauciatus (Koch, 1845) along the north-west Iberian Peninsula: filling historical gaps

Science.gov (United States)

Rubal, Marcos; Veiga, Puri; Moreira, Juan; Sousa-Pinto, Isabel

2014-03-01

The intertidal gastropod Phorcus sauciatus is a subtropical grazer that reaches its northern boundary in the Iberian Peninsula. Distribution of P. sauciatus along the Iberian Peninsula shows, however, gaps in its distribution. The present study was aimed at detecting possible recent changes on the population structure and distribution of P. sauciatus along the north-west Atlantic coast of the Iberian Peninsula. To achieve this aim, we adopted a qualitative sampling design to explore the presence of P. sauciatus along a region within its historical gap of distribution (north Portuguese coast). In addition, a quantitative sampling design was adopted to test hypotheses about the abundance and size structure of P. sauciatus populations among regions with different historical records of its abundance and among shores with different exposure. Results showed that P. sauciatus was present along the north Portuguese coast. However, the abundance and size structure of the newly settled populations were significantly different to those of the historically recorded populations. Moreover, P. sauciatus was able to establish populations at sheltered shores. Considering these results, we propose models for the distribution of P. sauciatus along the Iberian Peninsula, based on effects of sea surface temperature, and to explain the size-frequency of their populations based on their density.

Thermal behaviour of high burnup PWR fuel under different fill gas conditions

International Nuclear Information System (INIS)

Tverberg, T.

2001-01-01

During its more than 40 years of existence, a large number of experiments have been carried out at the Halden Reactor Project focusing on different aspects related to nuclear reactor fuel. During recent years, the fuels testing program has mainly been focusing on aspects related to high burnup, in particular in terms of fuel thermal performance and fission gas release, and often involving reinstrumentation of commercially irradiated fuel. The paper describes such an experiment where a PWR rod, previously irradiated in a commercial reactor to a burnup of ∼50 MWd/kgUO 2 , was reinstrumented with a fuel central oxide thermocouple and a cladding extensometer together with a high pressure gas flow line, allowing for different fill gas compositions and pressures to be applied. The paper focuses on the thermal behaviour of such LWR rods with emphasis on how different fill gas conditions influence the fuel temperatures and gap conductance. Rod growth rate was also monitored during the irradiation in the Halden reactor. (author)

Submersible Data (Dive Trackpoints) for Expedition to the Deep Slope 2007 - Office of Ocean Exploration

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data and information collected by the ROV Jason along its track during sixteen dives of the 2007 "Expedition to the Deep Slope" expedition sponsored by the National...

Gaps within the Biomedical Literature: Initial Characterization and Assessment of Strategies for Discovery

Directory of Open Access Journals (Sweden)

Yufang Peng

2017-05-01

Full Text Available Within well-established fields of biomedical science, we identify “gaps,” topical areas of investigation that might be expected to occur but are missing. We define a field by carrying out a topical PubMed query and analyze Medical Subject Headings (MeSH by which the set of retrieved articles are indexed. MeSH terms that occur in >1% of the articles are examined pairwise to see how often they are predicted to co-occur within individual articles (assuming that they are independent of each other. A pair of MeSH terms that are predicted to co-occur in at least 10 articles, yet are not observed to co-occur in any article, are “gaps” and were studied further in a corpus of 10 disease-related article sets and 10 related to biological processes. Overall, articles that filled gaps were cited more heavily than non-gap-filling articles and were 61% more likely to be published in multidisciplinary high-impact journals. Nine different features of these “gaps” were characterized and tested to learn which, if any, correlate with the appearance of one or more articles containing both MeSH terms within the next 5 years. Several different types of gaps were identified, each having distinct combinations of predictive features: (a those arising as a byproduct of MeSH indexing rules; (b those having little biological meaning; (c those representing “low hanging fruit” for immediate exploitation; and (d those representing gaps across disciplines or subdisciplines that do not talk to each other or work together. We have built a free, open tool called “Mine the Gap!” that identifies and characterizes the “gaps” for any PubMed query, which can be accessed via the Anne O’Tate value-added PubMed search interface (http://arrowsmith.psych.uic.edu/cgi-bin/arrowsmith_uic/AnneOTate.cgi.

Ultrasound in assisted reproduction: a call to fill the endometrial gap.

Science.gov (United States)

Hershko-Klement, Anat; Tepper, Ronnie

2016-06-01

Ultrasound offers essential details and an overall view of the anatomic features of the reproductive organs, as well as physiologic assessment. There is still a great gap, however, in our understanding and interpretation of endometrial sonographic findings. Endometrial thickness, growth, and sonographic patterns have been repeatedly tested and compared with pregnancy rates in IVF cycles, yielding conflicting results. Generally, the data accrued so far suggest refraining from clinical decisions based solely on endometrial thickness. The three-layer ultrasound pattern reflects normal follicular/proliferative dynamics, and its presence in the pre-hCG period was reported to carry a better outcome: Significantly higher clinical pregnancy rates were found in patients with this pattern on the day of hCG administration among IVF cohorts. Subendometrial contractility (endometrial "waves") offers a tool that can be used in cases of repeated implantation failure in patients reporting cramps around the planned time of embryo transfer, or as a reassuring modality to assess uterine quiescence during preparations for embryo transfer. We support the creation of an integrated endometrial score incorporating conservative endometrial measurements, endometrial-myometrial junction studies, and endometrial contractility, as well as new concepts that remain to be tested, such as endometrial surface area. Such scores may enable us to improve the effectiveness of endometrial ultrasound imaging in the clinical setting. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Teen pregnancy in Inuit communities - gaps still needed to be filled.

Science.gov (United States)

Moisan, Caroline; Baril, Chloé; Muckle, Gina; Belanger, Richard E

2016-01-01

Teen pregnancy is depicted around the world as an important cause of health disparities both for the child and the mother. Accordingly, much effort has been invested in its prevention and led to its decline in the northern hemisphere since the mid-1990s. Despite that, high rates are still observed in the circumpolar regions. As Inuit communities have granted better understanding of teenage pregnancy a priority for the coming years, this article comprehensively reviews this multidimensional issue. By depicting current prevalence, likely determinants and possible impacts documented among Inuit of Canada, Alaska and Greenland, and contrasting them to common knowledge that has emerged from other populations over the years, great gaps surface. In some regions, the number of pregnancies per number of Inuit women aged between 15 and 19 years has increased since the turn of the millennium, while statistics from others are either absent or difficult to compare. Only few likely determinants of teenage pregnancy such as low education and some household factors have actually been recognized among Inuit populations. Documented impacts of early pregnancy on Inuit women and their children are also limited compared to those from other populations. As a way to better address early pregnancy in the circumpolar context, the defence for additional scientific efforts and the provision of culturally adapted sexual health prevention programmes appear critical.

Filling Terrorism Gaps: VEOs, Evaluating Databases, and Applying Risk Terrain Modeling to Terrorism

Energy Technology Data Exchange (ETDEWEB)

Hagan, Ross F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-08-29

This paper aims to address three issues: the lack of literature differentiating terrorism and violent extremist organizations (VEOs), terrorism incident databases, and the applicability of Risk Terrain Modeling (RTM) to terrorism. Current open source literature and publicly available government sources do not differentiate between terrorism and VEOs; furthermore, they fail to define them. Addressing the lack of a comprehensive comparison of existing terrorism data sources, a matrix comparing a dozen terrorism databases is constructed, providing insight toward the array of data available. RTM, a method for spatial risk analysis at a micro level, has some applicability to terrorism research, particularly for studies looking at risk indicators of terrorism. Leveraging attack data from multiple databases, combined with RTM, offers one avenue for closing existing research gaps in terrorism literature.

The Wilderness Expedition: An Effective Life Course Intervention to Improve Young People's Well-Being and Connectedness to Nature

Science.gov (United States)

Barton, Jo; Bragg, Rachel; Pretty, Jules; Roberts, Jo; Wood, Carly

2016-01-01

It is well understood that wilderness expeditions improve well-being; however, there is little supporting quantitative data. The aim of this study was to measure the impact of wilderness expeditions on self-esteem (SE) and connectedness to nature (CN) and assess whether benefits varied according to participant and expedition characteristics. SE…

The Royal Philanthropic Expedition of the Vaccine: a landmark in the history of public health.

Science.gov (United States)

Soto-Pérez-de-Celis, E

2008-11-01

In 1979, smallpox officially became the first disease ever to be eradicated by mankind. The global efforts to defeat this dreadful pandemic, however, started almost two centuries before. One of the most important, and sometimes forgotten, events in the fight against smallpox was the Royal Philanthropic Expedition of the Vaccine, commissioned by Charles IV of Spain to physicians Francisco Xavier Balmis y Berenguer and Jose Salvany in 1804. The aim of this expedition was to take the smallpox vaccine, discovered by Jenner, to Spain's territories in the Americas and in the Far East. After several years of vaccination in modern day Puerto Rico, Cuba, Venezuela, Ecuador, Peru, Bolivia, Chile, Mexico and the Philippines, the expedition returned to Europe. To this day, the Balmis and Salvany expedition remains a great example of international cooperation, and a landmark in the history of public health.

Postcolonial partnerships: deep sea research, media coverage and (inter)national narratives on the Galathea Deep Sea Expedition from 1950 to 1952.

Science.gov (United States)

Nielsen, Kristian Hvidtfelt

2010-03-01

The Danish Galathea Deep Sea Expedition between 1950 and 1952 combined scientific and official objectives with the production of national and international narratives distributed through the daily press and other media. Dispatched by the Danish government on a newly acquired naval ship, the expedition undertook groundbreaking deep sea research while also devoting efforts to showing the flag, public communication of science, and international cooperation. The expedition was conceived after the war as a way in which to rehabilitate Denmark's reputation internationally and to rebuild national pride. To this end, the expedition included an onboard press section reporting the expedition to the Danish public and to an international audience. The press section mediated the favourable, post-war and postcolonial image of Denmark as an internationalist, scientific, modernizing and civilizing nation for which the expedition planners and many others were hoping. The expedition, therefore, was highly relevant to, indeed fed on, the emerging internationalist agenda in Denmark's foreign policy. Bringing out these aspects of the historical context of the expedition, this paper adds important perspectives to our knowledge about the expedition in particular and, more generally, about scientific exploration in the immediate post-war and postcolonial period.

75As-NQR study of the hybridization gap semiconductor CeOs4As12

International Nuclear Information System (INIS)

Yogi, M; Niki, H; Higa, N; Kawata, T; Sekine, C

2016-01-01

We performed an 75 As nuclear quadrupole resonance (NQR) measurement on CeOs 4 As 12 . The 75 As-NQR spectrum shape demonstrates that the Ce-site filling fraction of our high-pressure synthesized sample is close to unity. A presence of the c — f hybridization gap is confirmed from the temperature dependence of the nuclear spin-lattice relaxation rate 1/T 1 . An increase of 1/T 1 below ∼3 K indicates a development of the spin fluctuations. The 1/T 1 for CeOs 4 As 12 shows similar behavior as that for CeOs 4 Sb 12 with different magnitude of the c — f hybridization gap. An absence of phase transition in CeOs 4 As 12 may be caused by the increase of the c — f hybridization, which increases the gap magnitude and reduces the residual density of state inside the gap. (paper)

Contamination Tracer Testing With Seabed Rock Drills: IODP Expedition 357

Science.gov (United States)

Orcutt, B.; Bergenthal, M.; Freudenthal, T.; Smith, D. J.; Lilley, M. D.; Schneiders, L.; Fruh-Green, G. L.

2016-12-01

IODP Expedition 357 utilized seabed rock drills for the first time in the history of the ocean drilling program, with the aim of collecting intact core of shallow mantle sequences from the Atlantis Massif to examine serpentinization processes and the deep biosphere. This new drilling approach required the development of a new system for delivering synthetic tracers during drilling to assess for possible sample contamination. Here, we describe this new tracer delivery system, assess the performance of the system during the expedition, provide an overview of the quality of the core samples collected for deep biosphere investigations based on tracer concentrations, and make recommendations for future applications of the system.

[The real philanthropic expedition of the smallpox vaccine: monarchy and modernity in 1803].

Science.gov (United States)

Rigau-Pérez, José G

2004-09-01

Smallpox resulted in the death of 30 % of those who acquired it, so the preventive method discovered by Edward Jenner (London, 1798) spread very quickly. At the request in 1803 of Carlos IV, king of Spain, his government evaluated offers to carry smallpox vaccine to the colonies. The selected proposal, by doctor Francisco Xavier de Balmis, sought to take the lymph to America and Asia in a chain of arm to arm vaccination of foundlings. The Expedition set sail from Corunna on November 30, 1803, stopped in the Canary Isles, Puerto Rico, and Venezuela and after Caracas (1804) split in two groups. Balmis led some members of the Expedition to Cuba and Mexico. For the trip to the Philippines, in 1805, parents lent their children in exchange for economic compensation and the promise that the boys would be returned home. The Expedition returned to Mexico in August, 1807, but Balmis separately took vaccine to China and returned to Spain. Another contingent of the Expedition, under vice-director José Salvany, took vaccine to what we know as Colombia, Ecuador, Peru and Bolivia. His assistant Manuel Grajales reached the Chilean Patagonia in 1811. This article also comments on three principal themes - the institutional management of the scientific project, the conflicts that characterized its course, and the children's experience. The Vaccine Expedition was a brave and humanitarian endeavor, but also an extraordinary sanitary and administrative success. It was not until the twentieth century that a global eradication campaign eliminated smallpox in the world.

IODP Expedition 352 (Bonin Forearc): First Results

Science.gov (United States)

Pearce, J. A.; Reagan, M. K.; Stern, R. J.; Petronotis, K. E.

2014-12-01

IODP Expedition #352 (Testing Subduction Initiation and Ophiolite Models by Drilling the Outer Izu-Bonin-Mariana Forearc: July 30-Sept. 29, 2014) is just underway at the time of writing. It is testing the Stern-Bloomer hypothesis that subduction initiation (SI) was followed by a strongly extensional period of slab sinking and trench roll-back and then by a transitional period leading to the establishment of significant slab-parallel plate motion and hence normal subduction. The Expedition aims to carry out offset drilling at two sites near 28°30'N in the Bonin forearc. Ideally, these together will give the vertical volcanic stratigraphy needed to trace the geodynamic and petrogenetic processes associated with SI, and provide the complete reference section required for comparison with volcanic sequences of possible SI origin found on land in ophiolite complexes and elsewhere. We predict, but need to confirm, a c. 1.0-1.5km sequence with basal, MORB-like forearc basalts (known as FAB) marking the initial period of extension, boninites characterizing the transitional period, and tholeiitic and calc-alkaline lavas marking the establishment of normal arc volcanism. Study of such a sequence will enable us to understand the chemical gradients within and across these volcanic units, to reconstruct mantle flow and melting processes during the course of SI, and to test the hypothesis that fore-arc lithosphere created during SI is the birthplace of most supra-subduction zone ophiolites. Here, we present the first Expedition results, including (a) the volcanic stratigraphic record and subdivision into lava units, (b) the classifications and interpretations made possible by shipboard (portable XRF and ICP) analyses and down-hole measurements, and (c) the biostratigraphic, magnetic, mineralogical, sedimentary and structural constraints on the geological history of the SI section and the interactions between magmatic, hydrothermal and tectonic activity during its evolution.

The effect of expedited rotator cuff surgery in injured workers: a case-control study.

Science.gov (United States)

Razmjou, Helen; Lincoln, Sandra; Boljanovic, Dragana; Gallay, Stephen; Henry, Patrick; Richards, Robin R; Holtby, Richard

2017-07-01

Expediting rotator cuff surgery is expected to facilitate recovery and return to work in injured workers. This case-control study examined the effect of expedited rotator cuff surgery on recovery and work status in injured workers. Injured workers who had undergone an expedited rotator cuff surgery funded by parallel-pay insurance (study group) were compared with workers who had used the public health insurance (control group) while adjusting for sex, age, severity of pathology, and follow-up period. Disability was measured by the American Shoulder and Elbow Surgeons (ASES) Standardized Assessment Form score. The percentage of patients who exceeded the minimal clinically important difference of 17 points in the ASES was calculated. The study group waited less time to have surgery than the control group (P workers who underwent expedited rotator cuff surgery reported less disability and had a more successful return to work after surgery than injured workers who waited longer for specialist assessment and surgery within the public health system. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

On the Turn of Two Millennia (60 Years of the Mari Archaeological Expedition

Directory of Open Access Journals (Sweden)

Nikitin Valeriy V.,

2017-03-01

Full Text Available The article is dedicated to the 60th Anniversary of the Mari Archaeological Expedition and summarizes the two decades of its studies (1996-2016 into the early cultures of the Mari region, starting from the era of the original settlement (Mesolithic, through the Neolithic-Eneolithic, Bronze Age, Early Iron Age and up to the Middle Ages. The expedition studied stations and settlements of primitive cultures, as well as unfortified and fortified settlements and necropolises. Special studies focused on formation and development of the early Mari culture, as well as the material and spiritual culture of the medieval Mari. The expedition continues its survey exploration in order to identify new archaeological sites. During the reported period, twelve monographs were published and three monographs prepared based on the expedition’s materials.

Phosphorene for energy and catalytic application—filling the gap between graphene and 2D metal chalcogenides

Science.gov (United States)

Jain, Rishabh; Narayan, Rekha; Padmajan Sasikala, Suchithra; Lee, Kyung Eun; Jung, Hong Ju; Ouk Kim, Sang

2017-12-01

Phosphorene, a newly emerging graphene analogous 2D elemental material of phosphorous atoms, is unique on the grounds of its natural direct band gap opening, highly anisotropic and extraordinary physical properties. This review highlights the current status of phosphorene research in energy and catalytic applications. The initial part illustrates the typical physical properties of phosphorene, which successfully bridge the prolonged gap between graphene and 2D metal chalcogenides. Various synthetic methods available for black phosphorus (BP) and the exfoliation/growth techniques for single to few-layer phosphorene are also overviewed. The latter part of this review details the working mechanisms and performances of phosphorene/BP in batteries, supercapacitors, photocatalysis, and electrocatalysis. Special attention has been paid to the research efforts to overcome the inherent shortcomings faced by phosphorene based devices. The relevant device performances are compared with graphene and 2D metal chalcogenides based counterparts. Furthermore, the underlying mechanism behind the unstable nature of phosphorene under ambient condition is discussed along with the various approaches to avoid ambient degradation. Finally, comments are offered for the future prospective explorations and outlook as well as challenges lying in the road ahead for phosphorene research.

Bioinvasion in a Brazilian bay: filling gaps in the knowledge of southwestern Atlantic biota.

Directory of Open Access Journals (Sweden)

Barbara L Ignacio

2010-09-01

Full Text Available Biological invasions are a major cause of global species change. Nevertheless, knowledge about the distribution and ecology of introduced species is regionally biased, and many gaps in knowledge exist for most developing countries.To study the zoobenthos on the hard substratum of the Ilha Grande Bay, a survey was conducted on both natural and artificial substrata at three depths and seven sites. The species recorded were classified as native, cryptogenic or introduced. Multivariate analyses were conducted to assess the prevalence of introduced species in these communities and to compare the distribution of species on natural and artificial substrata of this bay to identify possible discrepancies in habitat use. Of the 61 species, 25 were cryptogenic, 10 were introduced and 26 were native. Similar numbers of introduced species were found on both natural and artificial substrata, though the community composition was significantly different between them. We also compared the species composition of the Ilha Grande Bay survey to other inventories taken around the world. The highest similarities were found between the Ilha Grande Bay inventory and the Atlantic coastal region (Tampa Bay, USA and the Gulf of Mexico, American Samoa and Pearl Harbor (USA inventories.This study presents the first published comprehensive list of hard substratum sessile marine invertebrate species in a Brazilian bay. The high percentage of cryptogenic species reveals gaps in both zoological records and information on introduced species for the Brazilian coast. The introduced species successfully colonized different sites in the Ilha Grande Bay, including both natural and artificial substrata. In addition, we find that artificial structures may not be good surrogates for natural rocky shores and may represent an ecological threat. Comparisons with other inventories suggest a history of broad-scale invasion, though more evidence is needed to support this conclusion.

The structure of filled skutterudites and the local vibration behavior of the filling atom

Energy Technology Data Exchange (ETDEWEB)

Zhou, Xiaojuan [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Dongguan Institute of Neutron Science, Dongguan 523808 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zong, Peng-an [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Chen, Xihong [Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Tao, Juzhou, E-mail: taoj@ihep.ac.cn [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Dongguan Institute of Neutron Science, Dongguan 523808 (China); Lin, He, E-mail: linhe@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Science, Shanghai 201204 (China)

2017-02-15

Both of atomic pair distribution function (PDF) and extended x-ray absorption fine structure (EXAFS) experiments have been carried out on unfilled and Yb-filled skutterudites Yb{sub x}Co{sub 4}Sb{sub 12} (x=0, 0.15, 0.2 and 0.25) samples. The structure refinements on PDF data confirm the large amplitude vibration of Yb atom and the dependence of Yb vibration amplitude on the filling content. Temperature dependent EXAFS experiment on filled skutterudites have been carried out at Yb L{sub Ⅲ}-edge in order to explore the local vibration behavior of filled atom. EXAFS experiments show that the Einstein temperature of the filled atom is very low (70.9 K) which agrees with the rattling behavior.

15 CFR 325.8 - Expediting the certification process.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Expediting the certification process. 325.8 Section 325.8 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS EXPORT TRADE...

Expedited CT-Based Methods for Evaluating Fracture Severity to Assess Risk of Post-Traumatic Osteoarthritis After Articular Fractures.

Science.gov (United States)

Anderson, Donald D; Kilburg, Anthony T; Thomas, Thaddeus P; Marsh, J Lawrence

2016-01-01

Post-traumatic osteoarthritis (PTOA) is common after intra-articular fractures of the tibial plafond. An objective CT-based measure of fracture severity was previously found to reliably predict whether PTOA developed following surgical treatment of such fractures. However, the extended time required obtaining the fracture energy metric and its reliance upon an intact contralateral limb CT limited its clinical applicability. The objective of this study was to establish an expedited fracture severity metric that provided comparable PTOA predictive ability without the prior limitations. An expedited fracture severity metric was computed from the CT scans of 30 tibial plafond fractures using textural analysis to quantify disorder in CT images. The expedited method utilized an intact surrogate model to enable severity assessment without requiring a contralateral limb CT. Agreement between the expedited fracture severity metric and the Kellgren-Lawrence (KL) radiographic OA score at two-year follow-up was assessed using concordance. The ability of the metric to differentiate between patients that did or did not develop PTOA was assessed using the Wilcoxon Ranked Sum test. The expedited severity metric agreed well (75.2% concordance) with the KL scores. The initial fracture severity of cases that developed PTOA differed significantly (p = 0.004) from those that did not. Receiver operating characteristic analysis showed that the expedited severity metric could accurately predict PTOA outcome in 80% of the cases. The time required to obtain the expedited severity metric averaged 14.9 minutes/ case, and the metric was obtained without using an intact contralateral CT. The expedited CT-based methods for fracture severity assessment present a solution to issues limiting the utility of prior methods. In a relatively short amount of time, the expedited methodology provided a severity score capable of predicting PTOA risk, without needing to have the intact contralateral limb

Graded band-gap engineering for increased efficiency in CZTS solar cells

Science.gov (United States)

Ferhati, H.; Djeffal, F.

2018-02-01

In this paper, we propose a potential high efficiency Cu2ZnSn(S,Se)4/CdS (CZTS) solar cell design based on graded band-gap engineering that can offer the benefits of improved absorption behavior and reduced recombination effects. Moreover, a new hybrid approach based on analytical modeling and Particle Swarm Optimization (PSO) is proposed to determinate the optimal band-gap profile of the amended CZTS absorber layer to achieve further efficiency enhancement. It is found that the proposed design exhibits superior performance, where a high efficiency of 16.9% is recorded for the optimized solar cell with a relative improvement of 92%, compared with the reference cell efficiency of 8.8%. Likewise, the optimized CZTS solar cell with a graded band-gap enables achieving a higher open circuit voltage of 889 mV, a short-circuit current of 28.5 mA and a fill factor of 66%. Therefore, the optimized CZTS-based solar cell with graded-band gap paradigm pinpoints a new path toward recording high-efficiency thin-film solar cells through enhancing carrier collection and reducing the recombination rate.

Fabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding

Directory of Open Access Journals (Sweden)

Yoshihiko Hangai

2015-10-01

Full Text Available Aluminum foam is usually used as the core of composite materials by combining it with dense materials, such as in Al foam core sandwich panels and Al-foam-filled tubes, owing to its low tensile and bending strengths. In this study, all-Al foam-filled tubes consisting of ADC12 Al-Si-Cu die-cast aluminum alloy foam and a dense A1050 commercially pure Al tube with metal bonding were fabricated by friction welding. First, it was found that the ADC12 precursor was firmly bonded throughout the inner wall of the A1050 tube without a gap between the precursor and the tube by friction welding. No deformation of the tube or foaming of the precursor was observed during the friction welding. Next, it was shown that by heat treatment of an ADC12-precursor-bonded A1050 tube, gases generated by the decomposition of the blowing agent expand the softened ADC12 to produce the ADC12 foam interior of the dense A1050 tube. A holding time during the foaming process of approximately tH = 8.5 min with a holding temperature of 948 K was found to be suitable for obtaining a sound ADC12-foam-filled A1050 tube with sufficient foaming, almost uniform pore structures over the entire specimen, and no deformation or reduction in the thickness of the tube.

Operation feedback of hydrogen filling station

International Nuclear Information System (INIS)

Pregassame, S.; Barral, K.; Allidieres, L.; Charbonneau, T.; Lacombe, Y.

2004-01-01

One of the technical challenges of hydrogen technology is the development of hydrogen infrastructures which satisfy either safety requirements and reliability of filling processes. AIR LIQUIDE realized an hydrogen filling station in Sassenage (France) operational since September 2003. This station is able to fill 3 buses a day up to 350bar by equilibrium with high pressure buffers. In parallel with commercial stations, the group wanted to create a testing ground in real conditions running with several objectives: validate on a full scale bench a simulation tool able to predict the temperature of both gas and cylinder's materials during filling processes; define the best filling procedures in order to reach mass, temperature and filling time targets; analyse the temperature distribution and evolution inside the cylinder; get a general knowledge about hydrogen stations from safety and reliability point of view; operate the first full scale refuelling station in France. The station is also up-graded for 700bar filling from either a liquid hydrogen source or a gas booster, with cold filling possibility. This paper presents the results concerning 350bar filling : thermal effects, optimal filling procedures and influence of parameters such as climatic conditions are discussed. (author)

Droplet Measurement below Single-Layer Grid Fill

Directory of Open Access Journals (Sweden)

Vitkovic Pavol

2016-01-01

Full Text Available The main part of the heat transfer in a cooling tower is in a fill zone. This one is consist of a cooling fill. For the cooling tower is used a film fill or grid fill or splash fill in the generally. The grid fill has lower heat transfer performance like film fill usually. But their advantage is high resistance to blockage of the fill. The grid fill is consisted with independent layers made from plastic usually. The layers consist of several bars connected to the different shapes. For experiment was used the rhombus shape. The drops diameter was measured above and below the Grid fill.

The band gap variation of a two dimensional binary locally resonant structure in thermal environment

Directory of Open Access Journals (Sweden)

Zhen Li

2017-01-01

Full Text Available In this study, the numerical investigation of thermal effect on band gap dynamical characteristic for a two-dimensional binary structure composed of aluminum plate periodically filled with nitrile rubber cylinder is presented. Initially, the band gap of the binary structure variation trend with increasing temperature is studied by taking the softening effect of thermal stress into account. A breakthrough is made which found the band gap being narrower and shifting to lower frequency in thermal environment. The complete band gap which in higher frequency is more sensitive to temperature that it disappears with temperature increasing. Then some new transformed models are created by changing the height of nitrile rubber cylinder from 1mm to 7mm. Simulations show that transformed model can produce a wider band gap (either flexure or complete band gap. A proper forbidden gap of elastic wave can be utilized in thermal environment although both flexure and complete band gaps become narrower with temperature. Besides that, there is a zero-frequency flat band appearing in the first flexure band, and it becomes broader with temperature increasing. The band gap width decreases trend in thermal environment, as well as the wider band gap induced by the transformed model with higher nitrile rubber cylinder is useful for the design and application of phononic crystal structures in thermal environment.

Expedited enforcement of UST regulations in New Mexico

International Nuclear Information System (INIS)

Sutton-Mendoza, S.A.

1993-01-01

New Mexico is the first state to implement an expedited enforcement program to enhance compliance with the Underground Storage Tank Regulations (USTR). UST field inspectors conduct inspections at UST facilities to ensure compliance with the USTR. If the inspector detects a violation, a field Notice of Violation is issued to the owner/operator and a penalty assessed. Prior to expedited enforcement 14% of the violations were corrected. Since implementing the program the Underground Storage Tank Bureau has conducted 592 inspections, issued 181 field Notices of Violation and 52% of those cited have complied. As a result of the enforcement program 85% of the facilities inspected are in compliance with USTR. This program has been successful in gaining compliance with USTR, specifically the release detection requirements. The UST Bureau has significantly increased compliance with the Regulations; and thereby reduced the threats to New Mexico's environment posed by petroleum products and hazardous substances released from underground storage tanks

Not Just About the Science: Cold War Politics and the International Indian Ocean Expedition

Science.gov (United States)

Harper, K.

2016-12-01

The International Indian Ocean Expedition broke ground for a series of multi-national oceanographic expeditions starting in the late 1950s. In and of itself, it would have been historically significant—like the International Geophysical Year (1957-58)—for pulling together the international scientific community during the Cold War. However, US support for this and follow-on Indian Ocean expeditions were not just about the science; they were also about diplomacy, specifically efforts to bring non-aligned India into the US political orbit and out of the clutches of its Cold War enemy, the Soviet Union. This paper examines the behind-the-scenes efforts at the highest reaches of the US government to extract international political gain out of a large-scale scientific effort.

Filling a Conical Cavity

Science.gov (United States)

Nye, Kyle; Eslam-Panah, Azar

2016-11-01

Root canal treatment involves the removal of infected tissue inside the tooth's canal system and filling the space with a dense sealing agent to prevent further infection. A good root canal treatment happens when the canals are filled homogeneously and tightly down to the root apex. Such a tooth is able to provide valuable service for an entire lifetime. However, there are some examples of poorly performed root canals where the anterior and posterior routes are not filled completely. Small packets of air can be trapped in narrow access cavities when restoring with resin composites. Such teeth can cause trouble even after many years and lead the conditions like acute bone infection or abscesses. In this study, the filling of dead-end conical cavities with various liquids is reported. The first case studies included conical cavity models with different angles and lengths to visualize the filling process. In this investigation, the rate and completeness at which a variety of liquids fill the cavity were observed to find ideal conditions for the process. Then, a 3D printed model of the scaled representation of a molar with prepared post spaces was used to simulate the root canal treatment. The results of this study can be used to gain a better understanding of the restoration for endodontically treated teeth.

The effect of exchange interaction on quasiparticle Landau levels in narrow-gap quantum well heterostructures.

Science.gov (United States)

Krishtopenko, S S; Gavrilenko, V I; Goiran, M

2012-04-04

Using the 'screened' Hartree-Fock approximation based on the eight-band k·p Hamiltonian, we have extended our previous work (Krishtopenko et al 2011 J. Phys.: Condens. Matter 23 385601) on exchange enhancement of the g-factor in narrow-gap quantum well heterostructures by calculating the exchange renormalization of quasiparticle energies, the density of states at the Fermi level and the quasiparticle g-factor for different Landau levels overlapping. We demonstrate that exchange interaction yields more pronounced Zeeman splitting of the density of states at the Fermi level and leads to the appearance of peak-shaped features in the dependence of the Landau level energies on the magnetic field at integer filling factors. We also find that the quasiparticle g-factor does not reach the maximum value at odd filling factors in the presence of large overlapping of spin-split Landau levels. We advance an argument that the behavior of the quasiparticle g-factor in weak magnetic fields is defined by a random potential of impurities in narrow-gap heterostructures. © 2012 IOP Publishing Ltd

Job Grading Standard for Materials Expediter WG-6705.

Science.gov (United States)

Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

The standard is used to grade nonsupervisory jobs involved in routing and expediting the movement of parts, end items, supplies, and materials within production and repair facilities to meet priority needs. The work requires knowledge of material characteristics, uses, condition, industrial production shop procedures, shop layout, and internal…

Satellite Eye for the Galathea 3 ship expedition: Global tour 2006-2007

DEFF Research Database (Denmark)

Hasager, Charlotte Bay; Badger, Merete; Sørensen, Peter

2007-01-01

Satellite Eye for Galathea 3 (www.satellitecye.dk contains education at the internet for secondary and upper secondary schools and the public. The Galathea 3 ship expedition circumnavigated the globe starting from Denmark 11 August 2006, visiting Greenland, Azores, South Africa, Australia, Solomon...... of the expedition and these classes in particular used the Satellite Eye teaching material. In Google Earth satellite images of many themes are shown. These include sea ice, sea surface temperature, ocean wind, wave height, sea surface level, ozone, clouds and radar images of ocean and land. Also high spatial...

Using the Direct Sampling Multiple-Point Geostatistical Method for Filling Gaps in Landsat 7 ETM+ SLC-off Imagery

KAUST Repository

Yin, Gaohong

2016-01-01

simulation case. The Direct Sampling method was examined across a range of land cover types including deserts, sparse rural areas, dense farmlands, urban areas, braided rivers and coastal areas to demonstrate its capacity to recover gaps accurately

Harnessing the bistable composite shells to design a tunable phononic band gap structure

Science.gov (United States)

Li, Yi; Xu, Yanlong

2018-02-01

By proposing a system composed of an array of bistable composite shells immersed in air, we develop a new class of periodic structure to control the propagation of sound. Through numerical investigation, we find that the acoustic band gap of this system can be switched on and off by triggering the snap through deformation of the bistable composite shells. The shape of cross section and filling fraction of unit cell can be altered by different number of bistable composite shells, and they have strong impact on the position and width of the band gap. The proposed concept paves the way of using the bistable structures to design a new class of metamaterials that can be enable to manipulate sound.

An Exploration of Canadian Identity in Recent Literary Narratives of the Franklin Expeditions

Directory of Open Access Journals (Sweden)

Victor Kennedy

2006-06-01

Full Text Available Sir John Franklin’s three expeditions to the high Arctic in 1819, 1825, and 1845 have become the stuff of Canadian legend, enshrined in history books, songs, short stories, novels, and web sites. Franklin set out in 1845 to discover the Northwest Passage with the most advanced technology the British Empire could muster, and disappeared forever. Many rescue explorations found only scant evidence of the Expedition, and the mystery was finally solved only recently. This paper will explore four recent fictional works on Franklin’s expeditions, Stan Rogers’ song “Northwest Passage”, Margaret Atwood’s short story “The Age of Lead”, Rudy Wiebe’s A Discovery of Strangers, and John Wilson’s North with Franklin: the Lost Journals of James Fitzjames, to see how Franklin’s ghost has haunted the hopes and values of nineteenth-century, as well as modern, Canada.

Framing the Arctic: Reconsidering Roald Amundsen’s Gjøa Expedition Imagery

Directory of Open Access Journals (Sweden)

Ingeborg Høvik

2015-04-01

Full Text Available In 1906 Roald Amundsen’s Gjøa Expedition returned to Norway after three years in the Arctic. The first to complete a Northwest Passage by sea, the expedition also brought back a substantial amount of ethnographic material concerning the Netsilik Inuit, with whom Amundsen and his crew had been in sustained contact during their stay on King William Island in Nunavut between 1903 and 1905. This material included a large number of photographs, forty-two of which were included as illustrations in his expedition narrative, titled Nordvest-passagen and first released in Norwegian in 1907. Focusing on a selection of published and unpublished photographs from Amundsen’s voyage and their interrelationships, this article examines the degree to which the Gjøa Expedition’s use of photography formed part of a planned project that intersected with anthropological concerns and practices of its time. My purpose is further to demonstrate that there is a discernible change in the representation of indigeneity that occurs when particular photographs were selected and then contextually reframed as illustrations in Nordvest-passagen. On the one hand, the extensive body of photographs taken in the field elaborates the close interaction between crew and Inuit recorded in Amundsen’s personal diary and published narrative, testifying to the existence of an active and dynamic contact zone. In this regard, the original photographs could arguably be read as a dialogic portrayal of the unique individuals Amundsen’s crew met while in the Arctic. On the other hand, a peculiar distancing seems to have taken place as the Gjøa Expedition’s photographs were selected and reproduced as illustrations for Amundsen’s expedition narrative. Likely connected to a desire to match his expedition narrative to existing scientific visual and literary conventions, this shift suggests Amundsen’s attempts through textual and visual means to deny the Netsilik Inuit�

Expedited Remedial Action Program (SB 923): A California Brownfields initiative

Energy Technology Data Exchange (ETDEWEB)

Cambridge, M.; Wolfenden, A.K.

1996-12-31

California`s Expedited Remedial Action Program (ERAP) created a comprehensive program that promotes an equitable and expedited approach for redevelopment of properties contaminated with hazardous substances. This bill embodies an emerging trend in environmental policy that permits flexibility, cooperation and creativity without compromising protection to public health or the environment. Within the California Environmental Protection Agency, the Department of Toxic Substances Control (DTSC) is promoting a number of programs to facilitate the restoration of contaminated properties as part of its Brownfields initiative. ERAP represents a potentially more efficient process to remediate sites by minimizing economic risks through a clearly identified liability scheme, indemnifying future owners through a covenant not to sue, and providing risk based cleanups that are based on the permanent use of the site.

Report of the JARE-54 and BELARE 2012-2013 joint expedition to collect meteorites on the Nansen Ice Field, Antarctica

Directory of Open Access Journals (Sweden)

Naoya Imae

2015-03-01

Full Text Available This paper reports on a joint expedition (JARE-54 and BELARE 2012-2013 that conducted a search for meteorites on the Nansen Ice Field, Antarctica, in an area south of the Sor Rondane Mountains (72°30′-73°S, 23°-25°E; elevation 2900-3000 m. The expedition took place over a period of 39 days during the austral summer, between 26 December 2012 and 2 February 2013. The team consisted of ten members: three researchers and one field assistant from the 54th Japanese Antarctic Research Expedition (JARE-54, and five researchers and one field assistant from the Belgian Antarctic Expedition (BELARE 2012-2013. Previously, this area had only been searched by JARE-29. The team collected 424 meteorites, which had a total weight of about 70 kg. The search tracks of the ten members of the expedition were recorded using hand-held GPS units, and this allowed the distribution of meteorites within the searched area to be mapped. The resultant data will be useful for planning future expeditions and can be used to clarify the meteorite concentration mechanism on the ice field. This paper focuses on the activities of JARE-54 during the joint expedition.

Microhardness of bulk-fill composite materials

OpenAIRE

Kelić, Katarina; Matić, Sanja; Marović, Danijela; Klarić, Eva; Tarle, Zrinka

2016-01-01

The aim of the study was to determine microhardness of high- and low-viscosity bulk-fill composite resins and compare it with conventional composite materials. Four materials of high-viscosity were tested, including three bulk-fills: QuiXfi l (QF), x-tra fil (XTF) and Tetric EvoCeram Bulk Fill (TEBCF), while nanohybrid composite GrandioSO (GSO) served as control. The other four were low-viscosity composites, three bulk-fill materials: Smart Dentin Replacement (SDR), Venus Bulk Fill (VBF) and ...

Two-dimensional fluid-filled closed-cell cellular solid as an acoustic metamaterial with negative index

Science.gov (United States)

Dorodnitsyn, V.; Van Damme, B.

2016-04-01

A concept for acoustic metamaterials consisting of a cellular medium with fluid-filled cells is fabricated and studied experimentally. In such a system, the fluid and solid structure explicitly interact, and elastic wave propagation is coupled to both phases. Focusing here on shear wave behavior, we confirm previous numerical studies in three steps. We first measure the material deformations pertaining to three qualitatively different shear wave modes in the frequency range below 3.5 kHz. We then measure the group velocity and demonstrate that, within a certain frequency interval, the group and phase velocity have opposite signs. This shows that the system acts as a negative-index metamaterial. Finally, we confirm the presence of band gaps due to the locally resonant behavior of the cell walls. The demonstrated concept of a closed, fluid-filled cellular material as an acoustic metamaterial opens a wide space for applications.

Radiopacity of root filling materials

International Nuclear Information System (INIS)

Beyer-Olsen, E.M.

1983-01-01

A method for measuring the radiopacity of root filling materials is described. Direct measurements were made of the optic density values of the materials in comparison with a standard curve relating optic density to the thickness of an aluminium step wedge exposed simultaneously. By proper selection of film and conditions for exposure and development, it was possible to obtain a near-linear standard curve which added to the safety and reproducibility of the method. The technique of radiographic assessment was modified from clinical procedures in evaluating the obturation in radiographs, and it was aimed at detecting slits or voids between the dental wall and the filling material. This radiographic assessment of potensial leakage was compared with actual in vitro lekage of dye (basic fuchsin) into the roots of filled teeth. The result of the investigation show that root filling materials display a very wide range of radiopacity, from less than 3 mm to more than 12 mm of aluminium. It also seem that tooth roots that appear to be well obturated by radiographic evaluation, stand a good chance of beeing resistant to leakage in vitro, and that the type of filling material rather than its radiographic appearance, determines the susceptibility of the filled tooth to leakage in vitro. As an appendix the report contains a survey of radiopaque additives in root filling materials

Teen pregnancy in Inuit communities – gaps still needed to be filled

Directory of Open Access Journals (Sweden)

Caroline Moisan

2016-12-01

Full Text Available Teen pregnancy is depicted around the world as an important cause of health disparities both for the child and the mother. Accordingly, much effort has been invested in its prevention and led to its decline in the northern hemisphere since the mid-1990s. Despite that, high rates are still observed in the circumpolar regions. As Inuit communities have granted better understanding of teenage pregnancy a priority for the coming years, this article comprehensively reviews this multidimensional issue. By depicting current prevalence, likely determinants and possible impacts documented among Inuit of Canada, Alaska and Greenland, and contrasting them to common knowledge that has emerged from other populations over the years, great gaps surface. In some regions, the number of pregnancies per number of Inuit women aged between 15 and 19 years has increased since the turn of the millennium, while statistics from others are either absent or difficult to compare. Only few likely determinants of teenage pregnancy such as low education and some household factors have actually been recognized among Inuit populations. Documented impacts of early pregnancy on Inuit women and their children are also limited compared to those from other populations. As a way to better address early pregnancy in the circumpolar context, the defence for additional scientific efforts and the provision of culturally adapted sexual health prevention programmes appear critical.

Teen pregnancy in Inuit communities – gaps still needed to be filled

Science.gov (United States)

Moisan, Caroline; Baril, Chloé; Muckle, Gina; Belanger, Richard E.

2016-01-01

Teen pregnancy is depicted around the world as an important cause of health disparities both for the child and the mother. Accordingly, much effort has been invested in its prevention and led to its decline in the northern hemisphere since the mid-1990s. Despite that, high rates are still observed in the circumpolar regions. As Inuit communities have granted better understanding of teenage pregnancy a priority for the coming years, this article comprehensively reviews this multidimensional issue. By depicting current prevalence, likely determinants and possible impacts documented among Inuit of Canada, Alaska and Greenland, and contrasting them to common knowledge that has emerged from other populations over the years, great gaps surface. In some regions, the number of pregnancies per number of Inuit women aged between 15 and 19 years has increased since the turn of the millennium, while statistics from others are either absent or difficult to compare. Only few likely determinants of teenage pregnancy such as low education and some household factors have actually been recognized among Inuit populations. Documented impacts of early pregnancy on Inuit women and their children are also limited compared to those from other populations. As a way to better address early pregnancy in the circumpolar context, the defence for additional scientific efforts and the provision of culturally adapted sexual health prevention programmes appear critical. PMID:27938638

Fabrication of a three-dimensional photonic band-gap crystal of air-spheres in a titania matrix

Science.gov (United States)

Diop, M.; Maurin, G.; Tork, Amir; Lessard, Roger A.

2003-02-01

A three-dimensional (3D) colloidal crystal have been grown from an aqueous colloidal solution of highly monodisperse submicrometer-sized polystyrene spheres using a self-assembly processing technique. The electromagnetic waves diffracted by this crystal can interfere and give rise to a photonic band-gap. However, due to the low refractive index contrast within this material the band-gap is incomplete. By filling the voids between the spheres of the colloidal crystal with titania and removing the polystyrene beads by sublimation, we obtained an inverse-opal structure with an increased refractive index contrast showing strong opalescence.

Estimation of water-filled and air-filled porosity in the unsaturated zone, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Nelson, P.H.

1993-01-01

Water content and porosity vary considerably within the unsaturated zone at Yucca Mountain. Measurement of these quantities has been based on core samples. A log-based approach offers the advantage of in-situ measurements, continuous throughout the borehole. This paper describes an algorithm which determines the air-filled and water-filled porosities from density and dielectric logs. The responses of density and dielectric logs are formulated in terms of the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole USW G-2 are in reasonable agreement with estimates from core determinations

[The royal philanthropic expedition of the vaccine (Xavier de Balmis/Josep Salvany). 1803-1806].

Science.gov (United States)

Botet, Francesc Asensi

2009-12-01

Six years after Jenner discovered the anti-smallpox vaccine, King Charles IV mandated the initiation of vaccination campaigns throughout his kingdom. The overseas campaign was coordinated by the Valencian military doctor Xavier de Balmis with the aid of the Catalan Josep Salvany. The vaccine was transported to America "in vivo" in 22 children. The expedition departed from La Coruña on November 1806 and arrived to the Venezuelan port of La Guayra where it was split in two: One sub expedition under the order of Josep Salvany, continued by land to Colombia, Ecuador, Peru and Bolivia. Salvany died in the Bolivian city of Cochabamba. The other sub expedition, leaded by Balmis himself, continued by sea to Cuba and Mexico. From Acapulco it arrived to Manila and from there to Macau followed by inland penetration into China.

The effect of tube filling on the electronic properties of Fe filled carbon nanotubes

International Nuclear Information System (INIS)

Linganiso, Ella C.; Chimowa, George; Franklyn, Paul J.; Bhattacharyya, Somnath; Coville, Neil J.

2012-01-01

Graphical abstract: HRTEM image of a twisted CNT filled with a bent single crystal of Fe. Insets from top to bottom show the power spectra of the corresponding regions, indicating the twisting of the Fe lattice. Inset in the top right shows the relative angling of the lattice fringes to accommodate the twisting of the Fe. Highlights: ► Synthesis of Fe filled CNTs with Fe content varying from 3 to 35%. ► TEM analysis indicates that Fe in the tubes is in contact with the CNTs. ► TEM analysis reveals that α-Fe crystallizes after CNT formation. ► Temperature dependent electronic transport measurements performed. ► Conductivity varies with the % Fe filling in the CNTs. - Abstract: Carbon nanotubes filled with Fe nanostructures (Fe-CNTs) were synthesized using an injection method in a 1-stage horizontal CVD furnace and a bubbling method in a 2-stage horizontal CVD reactor. Fe-CNTs were obtained through the pyrolysis of a mixture of dichlorobenzene and ferrocene in 5%H 2 /Ar. Metal impurities from the Fe-CNTs were removed using 1 M HCl solution. CNTs filled with crystalline Fe nanoparticles, nanorods and nanowires were obtained using these procedures. An intimate interaction between the Fe and the CNT was established by HRTEM studies. The α-Fe phase was observed to be the most dominant fraction found in the synthesized Fe-CNTs. The Fe 2 O 3 residue obtained from the TGA analysis revealed the amount of Fe filled inside the CNTs and this ranged between 3 and 31% by mass after purification. The temperature dependence of the conductivity in the temperature range between 2.5 and 100 K for an entangled network of Fe-CNTs was measured. An increase in conductivity due to the increased Fe filling inside the CNTs with increased temperature was observed. The observed temperature dependence was explained in terms of variable range hopping (VRH) conduction mechanisms. A transition from Efros–Shklovskii behavior at low % Fe filling of the CNTs to Mott 3D VRH behavior at

Mechanics of filled carbon nanotubes

KAUST Repository

Monteiro, A.O.; Cachim, P.B.; Da Costa, Pedro M. F. J.

2014-01-01

The benefits of filling carbon nanotubes (CNTs) with assorted molecular and crystalline substances have been investigated for the past two decades. Amongst the study of new structural phases, defects, chemical reactions and varied types of host-guest interactions, there is one fundamental characterisation aspect of these systems that continues to be overlooked: the mechanical behaviour of filled CNTs. In contrast to their empty counterparts, the mechanics of filled CNTs is a subject where reports appear far and apart, this despite being key to the application of these materials in technological devices. In the following paragraphs, we review the work that has been carried out up to the present on the mechanics of filled CNTs. The studies discussed range from experimental resonant frequency essays performed within electron microscopes to modelling, via molecular dynamics, of three-point bending of nanotubes filled with gases. (C) 2014 Elsevier B.V. All rights reserved.

Mechanics of filled carbon nanotubes

KAUST Repository

Monteiro, A.O.

2014-04-01

The benefits of filling carbon nanotubes (CNTs) with assorted molecular and crystalline substances have been investigated for the past two decades. Amongst the study of new structural phases, defects, chemical reactions and varied types of host-guest interactions, there is one fundamental characterisation aspect of these systems that continues to be overlooked: the mechanical behaviour of filled CNTs. In contrast to their empty counterparts, the mechanics of filled CNTs is a subject where reports appear far and apart, this despite being key to the application of these materials in technological devices. In the following paragraphs, we review the work that has been carried out up to the present on the mechanics of filled CNTs. The studies discussed range from experimental resonant frequency essays performed within electron microscopes to modelling, via molecular dynamics, of three-point bending of nanotubes filled with gases. (C) 2014 Elsevier B.V. All rights reserved.

Systolic ventricular filling.

Science.gov (United States)

Torrent-Guasp, Francisco; Kocica, Mladen J; Corno, Antonio; Komeda, Masashi; Cox, James; Flotats, A; Ballester-Rodes, Manel; Carreras-Costa, Francesc

2004-03-01

The evidence of the ventricular myocardial band (VMB) has revealed unavoidable coherence and mutual coupling of form and function in the ventricular myocardium, making it possible to understand the principles governing electrical, mechanical and energetical events within the human heart. From the earliest Erasistratus' observations, principal mechanisms responsible for the ventricular filling have still remained obscured. Contemporary experimental and clinical investigations unequivocally support the attitude that only powerful suction force, developed by the normal ventricles, would be able to produce an efficient filling of the ventricular cavities. The true origin and the precise time frame for generating such force are still controversial. Elastic recoil and muscular contraction were the most commonly mentioned, but yet, still not clearly explained mechanisms involved in the ventricular suction. Classical concepts about timing of successive mechanical events during the cardiac cycle, also do not offer understandable insight into the mechanism of the ventricular filling. The net result is the current state of insufficient knowledge of systolic and particularly diastolic function of normal and diseased heart. Here we summarize experimental evidence and theoretical backgrounds, which could be useful in understanding the phenomenon of the ventricular filling. Anatomy of the VMB, and recent proofs for its segmental electrical and mechanical activation, undoubtedly indicates that ventricular filling is the consequence of an active muscular contraction. Contraction of the ascendent segment of the VMB, with simultaneous shortening and rectifying of its fibers, produces the paradoxical increase of the ventricular volume and lengthening of its long axis. Specific spatial arrangement of the ascendent segment fibers, their interaction with adjacent descendent segment fibers, elastic elements and intra-cavitary blood volume (hemoskeleton), explain the physical principles

An Environmental Expedition Course in Search of the Maya.

Science.gov (United States)

Loret, John

1978-01-01

Sponsoring an interdisciplinary program (over 30 lecture hours of geology, ecology, anthropology, ethnology, and agriculture of the Yucatan and Meso-America), Queens College and the University of Connecticut provide expeditions to Mexico and study of local geomorphology, stratigraphy, climate, topography, soils, archeological sites, flora, and…

A lunar polar expedition

Science.gov (United States)

Dowling, Richard; Staehle, Robert L.; Svitek, Tomas

1992-09-01

Advanced exploration and development in harsh environments require mastery of basic human survival skill. Expeditions into the lethal climates of Earth's polar regions offer useful lessons for tommorrow's lunar pioneers. In Arctic and Antarctic exploration, 'wintering over' was a crucial milestone. The ability to establish a supply base and survive months of polar cold and darkness made extensive travel and exploration possible. Because of the possibility of near-constant solar illumination, the lunar polar regions, unlike Earth's may offer the most hospitable site for habitation. The World Space Foundation is examining a scenario for establishing a five-person expeditionary team on the lunar north pole for one year. This paper is a status report on a point design addressing site selection, transportation, power, and life support requirements.

The insurance industry and unconventional gas development: Gaps and recommendations

International Nuclear Information System (INIS)

Wetherell, Daniel; Evensen, Darrick

2016-01-01

The increasingly growing and controversial practice of natural gas development by horizontal drilling and high volume hydraulic fracturing (‘fracking’) faces a severe environmental insurance deficit at the industry level. Part of this deficit is arguably inherent to the process, whereas another part is caused by current risk information shortfalls on the processes and impacts associated with development. In the short and long terms, there are several conventional and unconventional methods by which industry-level and governmental-level policy can insure against these risks. Whilst academic attention has been afforded to the potential risks associated with unconventional natural gas development, little consideration has been given to the lack of insurance opportunities against these risks or to the additional risks promulgated by the dearth of insurance options. We chronicle the ways in which insurance options are limited due to unconventional gas development, the problems caused by lack of insurance offerings, and we highlight potential policy remedies for addressing these gaps, including a range of government- and industry-specific approaches. - Highlights: •A gap exists in provision of liability insurance for ‘fracking’-related risks. •The market gap is due primarily to uncertainties about probabilistic risk. •Insurance for risks similar to ‘fracking’ highlight potential policy options. •Government regulation and/or industry agreements can effectively fill the gap. •Policies on insurance and liability coverage necessitate ethical considerations.

Haughton-Mars Project Expedition 2005: Interplanetary Supply Chain Management & Logistics Architectures

Science.gov (United States)

deWeck, Olivier; Simchi-Levi, David

2006-01-01

The 2005 expedition to the Haughton-Mars Project (HMP) research station on Devon Island was part of a NASA-funded project on Space Logistics. A team of nine researchers from MIT went to the Canadian Arctic to participate in the annual HMP field campaign from July 8 to August 12, 2005. We investigated the applicability of the HMP research station as an analogue for planetary macro- and micro-logistics to the Moon and Mars, and began collecting data for modeling purposes. We also tested new technologies and procedures to enhance the ability of humans and robots to jointly explore remote environments. The expedition had four main objectives. We briefly summarize our key findings in each of these areas.

In-gap discounts in Medicare Part D and specialty drug use.

Science.gov (United States)

Jung, Jeah; Xu, Wendy Yi; Cheong, Chelim

2017-09-01

Specialty drugs can bring significant benefits to patients, but they can be expensive. Medicare Part D plans charge relatively high cost-sharing costs for specialty drugs. A provision in the Affordable Care Act reduced cost sharing in the Part D coverage gap phase in an attempt to mitigate the financial burden of beneficiaries with high drug spending. We examined the early impact of the Part D in-gap discount on specialty cancer drug use and patients' out-of-pocket (OOP) spending. Natural experimental design. We compared changes in outcomes before and after the in-gap discount among beneficiaries with and without low-income subsidies (LIS). Beneficiaries with LIS, who were not affected by the in-gap discount, made up the control group. We studied a random sample of elderly standalone prescription drug plan enrollees with relatively uncommon cancers (eg, leukemia, skin, pancreas, kidney, sarcomas, and non-Hodgkin lymphoma) between 2009 and 2013. We constructed 4 outcome variables annually: 1) use of any specialty cancer drug, 2) the number of specialty cancer drug fills, 3) total specialty drug spending, and 4) OOP spending for specialty cancer drugs. The in-gap discount did not influence specialty cancer drug use, but reduced annual OOP spending for specialty cancer drugs among users without LIS by $1108. In-gap discounts in Part D decreased patients' financial burden to some extent, but resulted in no change in specialty drug use. As demand for specialty drugs increases, it will be important to ensure patients' access to needed drugs, while simultaneously reducing their financial burden.

Vertical Scan-Conversion for Filling Purposes

OpenAIRE

Hersch, R. D.

1988-01-01

Conventional scan-conversion algorithms were developed independently of filling algorithms. They cause many problems, when used for filling purposes. However, today's raster printers and plotters require extended use of filling, especially for the generation of typographic characters and graphic line art. A new scan-conversion algorithm, called vertical scan-conversion has been specifically designed to meet the requirements of parity scan line fill algorithms. Vertical scan-conversion ensures...

Electronmicroscopical evaluation of short-term nerve regeneration through a thin-walled biodegradable poly(DLLA-epsilon-CL) nerve guide filled with modified denatured muscle tissue

NARCIS (Netherlands)

Meek, MF; Robinson, PH; Stokroos, [No Value; Blaauw, EH; Kors, G; den Dunnen, WFA

The aim of this study was to evaluate short-term peripheral nerve regeneration across a 15-mm gap in the sciatic nerve of the rat, using a thin-walled biodegradable poly(DL-lactide-epsilon -caprolactone) nerve guide filled with modified denatured muscle tissue (MDMT). The evaluation was performed

Expedition Earth and Beyond: Student Scientist Guidebook. Model Research Investigation

Science.gov (United States)

Graff, Paige Valderrama

2009-01-01

The Expedition Earth and Beyond Student Scientist Guidebook is designed to help student researchers model the process of science and conduct a research investigation. The Table of Contents listed outlines the steps included in this guidebook

8 CFR 1235.3 - Inadmissible aliens and expedited removal.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Inadmissible aliens and expedited removal. 1235.3 Section 1235.3 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION REGULATIONS INSPECTION OF PERSONS APPLYING FOR ADMISSION § 1235.3 Inadmissible aliens...

Removal of root filling materials.

LENUS (Irish Health Repository)

Duncan, H.F. Chong, B.S.

2011-05-01

Safe, successful and effective removal of root filling materials is an integral component of non-surgical root canal re-treatment. Access to the root canal system must be achieved in order to negotiate to the canal terminus so that deficiencies in the original treatment can be rectified. Since a range of materials have been advocated for filling root canals, different techniques are required for their removal. The management of commonly encountered root filling materials during non-surgical re-treatment, including the clinical procedures necessary for removal and the associated risks, are reviewed. As gutta-percha is the most widely used and accepted root filling material, there is a greater emphasis on its removal in this review.

Disproportionality Fills in the Gaps: Connections between Achievement, Discipline and Special Education in the School-to-Prison Pipeline

Science.gov (United States)

Annamma, Subini; Morrison, Deb; Jackson, Darrell

2014-01-01

The focus on the achievement gap has overshadowed ways in which school systems constrain student achievement through trends of racial disproportionality in areas such as school discipline, special education assignment, and juvenile justice. Using Critical Race Theory, we reframe these racial disparities as issues of institutionalized racism.…

Rural and remote dental services shortages: filling the gaps through geo-spatial analysis evidence-based targeting.

Science.gov (United States)

Shiika, Yulia; Kruger, Estie; Tennant, Marc

Australia has a significant mal-distribution of its limited dental workforce. Outside the major capital cities, the distribution of accessible dental care is at best patchy. This study applied geo-spatial analysis technology to locate gaps in dental service accessibility for rural and remote dwelling Australians, in order to test the hypothesis that there are a few key location points in Australia where further dental services could make a significant contribution to ameliorating the immediate shortage crisis. A total of 2,086 dental practices were located in country areas, covering a combined catchment area of 1.84 million square kilometers, based on 50 km catchment zones around each clinic. Geo-spatial analysis technology was used to identify gaps in the accessibility of dental services for rural and remote dwelling Australians. An extraction of data was obtained to analyse the integrated geographically-aligned database. Results: Resolution of the lack of dental practices for 74 townships (of greater than 500 residents) across Australia could potentially address access for 104,000 people. An examination of the socio-economic mix found that the majority of the dental practices (84%) are located in areas classified as less disadvantaged. Output from the study provided a cohesive national map that has identified locations that could have health improvement via the targeting of dental services to that location. The study identified potential location sites for dental clinics, to address the current inequity in accessing dental services in rural and remote Australia.

Expeditions to Death and Disaster: Chappe d'Auteroche and Charles Green at the 1769 Transit of Venus

Science.gov (United States)

Pasachoff, Jay M.

2012-09-01

Scientific expeditions usually bring back information or specimens that forward human knowledge. We also prefer them to bring back the humans in good shape, but that does not always occur. I discuss the expeditions to Siberia in 1761 and to Baja California in 1769 by the French abbé Jean Chappe d'Auteroche and to Tahiti in 1769 by the English astronomer Charles Green, accompanying Captain James Cook, to observe the transits of Venus. Neither Chappe d'Auteroche nor Green survived their expeditions. Chappe managed to hang on after the transit to see an eclipse of the Moon about two weeks later, and it is said that since ``the intent of his voyage was fulfilled, and the fruit of his observations secured,'' he ``died content,'' since ``he saw nothing more to wish for.'' Green died of dysentery caught in Batavia (now in Indonesia) on the continuation of his expedition with Capt. Cook on the ship Endeavour after the transit.

Detecting management and fertilization effects on the carbon balance of winter oilseed rape with manual closed chamber measurements: Can we outrange gap-filling uncertainty and spatiotemporal variability?

Science.gov (United States)

Huth, Vytas; Moffat, Antje Maria; Calmet, Anna; Andres, Monique; Laufer, Judit; Pehle, Natalia; Rach, Bernd; Gundlach, Laura; Augustin, Jürgen

2017-04-01

Winter oilseed rape is the dominant biofuel crop in the young moraine landscape in North-Eastern Germany. However, studies on the effect of rapeseed cropping on net ecosystem exchange of CO2 (NEE) and the soil carbon (SC) balance are scarce. SC balance estimates are usually derived from long-term soil sampling field trials where rapeseed is part of different crop rotations. The estimated annual differences linked to rapeseed cropping are rather small (varying between losses of 40 g C m-2 and gains of up to 100 g C m-2). Testing management effects on the NEE and SC balance of cropping systems is best done by comparing plots with different treatments at the same site under the same climate. The soil sampling approach is in the need of field trials that run over decades, which has the disadvantage that management strategies of practical farming may have already changed when the results are derived. Continuous eddy covariance measurements of NEE would require large fields in flat terrain for each of the treatments, which is especially complicated in the heterogeneous landscapes of glacigenic origin of North-Eastern Germany. The common approach of using the chamber technique to derive NEE, however, is subject to the local soil and plant stand heterogeneities due to its tiny footprint. This technique might also disturb the ecosystem, the measurements are usually discontinuous requiring elaborate gap-filling techniques, and it has mostly been used on organic soils where large respiratory C losses occur. Therefore, our aim was to answer, if a combined approach of the eddy covariance and the chamber technique can detect the relatively small NEE and SC differences of rapeseed cropping on mineral soils within a shorter period of time than conventional soil sampling field trials can. We tested the new experimental design taking the advantages of both techniques into account: The eddy covariance tower measuring the NEE dynamics during the year; the chamber measurements to

Filling the gap: using non-invasive geophysical methods to monitor the processes leading to enhanced carbon turnover induced by periodic water table fluctuations

Science.gov (United States)

Mellage, A.; Pronk, G.; Atekwana, E. A.; Furman, A.; Rezanezhad, F.; Van Cappellen, P.

2017-12-01

Subsurface transition environments such as the capillary fringe are characterized by steep gradients in redox conditions. Spatial and temporal variations in electron acceptor and donor availability - driven by hydrological changes - may enhance carbon turnover, in some cases resulting in pulses of CO2-respiration. Filling the mechanistic knowledge gap between the hydrological driver and its biogeochemical effects hinges on our ability to monitor microbial activity and key geochemical markers at a high spatial and temporal resolution. However, direct access to subsurface biogeochemical processes is logistically difficult, invasive and usually expensive. In-line, non-invasive geophysical techniques - Spectral Induced Polarization (SIP) and Electrodic Potential (EP), specifically - offer a comparatively inexpensive alternative and can provide data with high spatial and temporal resolution. The challenge lies in linking electrical responses to specific changes in biogeochemical processes. We conducted SIP and EP measurements on a soil column experiment where an artificial soil mixture was subjected to monthly drainage and imbibition cycles. SIP responses showed a clear dependence on redox zonation and microbial abundance. Temporally variable responses exhibited no direct moisture dependence suggesting that the measured responses recorded changes in microbial activity and coincided with the depth interval over which enhanced carbon turnover was observed. EP measurements detected the onset of sulfate mineralization and mapped its depth zonation. SIP and EP signals thus detected enhanced microbial activity within the water table fluctuation zone as well as the timing of the development of specific reactive processes. These findings can be used to relate measured electrical signals to specific reaction pathways and help inform reactive transport models, increasing their predictive capabilities.

Lyme disease ecology in a changing world: Consensus, uncertainty and critical gaps for improving control

Science.gov (United States)

Kilpatrick, A. Marm; Dobson, Andrew D.M.; Levi, Taal; Salkeld, Daniel J.; Swei, Andrea; Ginsberg, Howard; Kjemtrup, Anne; Padgett, Kerry A.; Jensen, Per A.; Fish, Durland; Ogden, Nick H.; Diuk-Wasser, Maria A.

2017-01-01

Lyme disease is the most common tick-borne disease in temperate regions of North America, Europe and Asia, and the number of reported cases has increased in many regions as landscapes have been altered. Although there has been extensive work on the ecology and epidemiology of this disease in both Europe and North America, substantial uncertainty exists about fundamental aspects that determine spatial and temporal variation in both disease risk and human incidence, which hamper effective and efficient prevention and control. Here we describe areas of consensus that can be built on, identify areas of uncertainty and outline research needed to fill these gaps to facilitate predictive models of disease risk and the development of novel disease control strategies. Key areas of uncertainty include: (i) the precise influence of deer abundance on tick abundance, (ii) how tick populations are regulated, (iii) assembly of host communities and tick-feeding patterns across different habitats, (iv) reservoir competence of host species, and (v) pathogenicity for humans of different genotypes of Borrelia burgdorferi. Filling these knowledge gaps will improve Lyme disease prevention and control and provide general insights into the drivers and dynamics of this emblematic multi-host–vector-borne zoonotic disease.

Exact Quantization of the Even-Denominator Fractional Quantum Hall State at ν =5/2 Landau Level Filling Factor

International Nuclear Information System (INIS)

Pan, W.; Tsui, D.C.; Pan, W.; Xia, J.; Shvarts, V.; Adams, D.E.; Xia, J.; Shvarts, V.; Adams, D.E.; Stormer, H.L.; Stormer, H.L.; Pfeiffer, L.N.; Baldwin, K.W.; West, K.W.

1999-01-01

We report ultralow temperature experiments on the obscure fractional quantum Hall effect at Landau level filling factor ν=5/2 in a very high-mobility specimen of μ=1.7x10 7 cm 2 /V s . We achieve an electron temperature as low as ∼4 mK , where we observe vanishing R xx and, for the first time, a quantized Hall resistance, R xy =h/(5/2)e 2 to within 2ppm. R xy at the neighboring odd-denominator states ν=7/3 and 8/3 is also quantized. The temperature dependences of the R xx minima at these fractional fillings yield activation energy gaps Δ 5/2 =0.11 , Δ 7/3 =0.10 , and Δ 8/3 =0.055 K . copyright 1999 The American Physical Society

Medical Operational Challenges in the Expedition 16 Landing and Recovery

Science.gov (United States)

Moynihan, S.; Johnston, S. L.; Ilcus, L. S.; Shevchenko, V.

2009-01-01

On April 19, 2008 the crew of Expedition 16 left the International Space Station and returned to earth via their Soyuz TMA-11 capsule after 192 days on orbit. Their capsule experienced the second consecutive and third ballistic reentry in the last 10 TMA recoveries and landed approximately 260 miles (420 km) from the prime landing site. Issues: The purpose of this presentation will be to describe, not only the typical medical operational challenges faced by Flight Surgeons recovering a long duration crew from space, but also address the unique challenges that existed with the Expedition 16 landing and crew recovery. Nominal Soyuz recovery challenges include remote recovery sites with crew exposures to sleep shifting and fatigue, dehydration, hypothermia and hyperthermia, and rotational, sustained, and impact g-forces. These environmental factors coupled with the patho-physiologic neuro-vestibular and orthostatic intolerance changes that occur secondary to the crews reintroduction into the earth s gravity field will be detailed. Additional challenges that were unique to this expedition included a ballistic reentry with higher g-loads, the presence of fire outside of the capsule on landing, a contingency medical event of a ground support personnel, and loss of communications with the crew just prior to landing and during recovery operations. Conclusions: In spite of these unique challenges the Russian Search and Rescue Forces and Medical Support personnel along with U.S. Medical Support performed well together. Possible improvements in training and coordination will be discussed.

The Malaysian heritage anscientific expedition: Endau-Rompin, 1985-1986

NARCIS (Netherlands)

Kiew, Ruth

1989-01-01

The Malayan Nature Society (MNS), a non-governmental organisation with about 3,000 members, has since its formation in 1940 always had a strong emphasis on conservation. The Society’s objective in mounting this expedition, a mammoth undertaking for any Society as it included raising funds to a tune

What Can Expeditions Do for Students … and for Science? An Investigation into the Impact of University of Glasgow Exploration Society Expeditions

Science.gov (United States)

Harper, Lynsey R.; Downie, J. Roger; Muir, Martin; White, Stewart A.

2017-01-01

The benefits of field courses for biological science students are well established, but field courses also have limitations: they are generally too brief to allow significant research and they are staff-designed and led, limiting the development of student autonomy. In contrast, the value of student-organised field expeditions has been little…

Voluntary program promotes equitable and expedited remediation of contaminated properties

Energy Technology Data Exchange (ETDEWEB)

Wolfenden, A.K.; Cambridge, M. [California Environmental Protection Agency, Sacramento, CA (United States). Dept. of Toxic Substances Control

1995-12-31

In California, the California Environmental Protection Agency (Cal/EPA) has developed a more equitable and expedited approach for the redevelopment of sites contaminated with hazardous substances. Senate Bill 923 enacted in 1994, established the Expedited Remedial Action Program (ERAP) under Chapter 6.85 of the California Health and Safety Code. This bill responds to a nationwide demand to reform Superfund laws and promote the restoration of blighted and contaminated parcels--often referred to as Brownfields. The program was designed as an alternative to CERCLA, which has come under criticism for being inefficient, unfair and restricting opportunities for effective cleanups. Cal/EPA`s Department of Toxic Substances Control will implement this pilot program. This pilot program, which will eventually comprise 30 sites, provides incentives for voluntary remediation by addressing key economic issues associated with the remediation and redevelopment of contaminated properties.

Embark students on geosciences expeditions, across the oceans …

Science.gov (United States)

Burgio, Marion; Darrieu, Michele; Pointu, Agnes; Maruejol, Patricia; Cooper, Sharon

2017-04-01

As teachers we can live and share a fabulous experience of science and research on the scientific drilling vessels and platforms of IODP-ECORD and JAMSTEC consortiums. ECORD offered us the opportunity to embark on the IODP 359, 360 and 362 expeditions as Education Officers. Our task was to communicate about science with the general public and students from 7 to 25 years-old. In this presentation, we will focus on the 360 expedition, South West Indian Ridge-lower crust and Moho. We explain the three steps of the "teacher at sea" experience from the very first idea to the real pedagogical work during and after the expedition. -Apply, get ready and leave… for two months: From the difficulties you may encounter to the most efficient ways to prepare the pedagogical tasks. -Work, live onboard and get back: We will describe the main activities of the Education officers among the Science party and the way all this can become a highly changing-life experience. -Use data, share and inspire: We will detail some strategies we used to catch the attention of the students. They could participate to "live" science and have a better idea of the job of researcher. Now, we have to inspire others teachers to use our data and pedagogical documents, or to get the opportunity to embark ! What gets out of these crossed experiences is that the quality of the human relationships, and the way the students can get closer to the scientists during the interactions, are the keys to motivate students and give them a new vision of the scientific research.

Influence of filling pattern structure on synchrotron radiation and beam spectrum at ANKA

Energy Technology Data Exchange (ETDEWEB)

Steinmann, Johannes; Brosi, Miriam; Bruendermann, Erik; Caselle, Michele; Blomley, Edmund; Hiller, Nicole; Kehrer, Benjamin; Mueller, Anke-Susanne; Schoenfeldt, Patrik; Schuh, Marcel; Schwarz, Markus; Siegel, Michael [Karlsruher Institut fuer Technologie, Karlsruhe (Germany)

2016-07-01

We present the effects of the filling pattern structure in multi-bunch mode on the beam spectrum. This effects can be seen by all detectors whose resolution is better than the RF frequency, ranging from stripline and Schottky measurements to high resolution synchrotron radiation measurements. Our heterodyne measurements of the emitted coherent synchrotron radiation at 270 GHz reveal the discrete frequency harmonics around the 100'000 revolution harmonic of ANKA, the synchrotron radiation facility in Karlsruhe, Germany. Significant effects of bunch spacing, gaps between bunch trains and variations in individual bunch currents on the emitted CSR spectrum are described by theory and supported by observations.

Technology of hardening fills for mined spaces

International Nuclear Information System (INIS)

Simek, P.; Holas, M.; Chyla, A.; Pech, P.

1985-01-01

The technology is described of hardening fills for mined spaces of uranium deposits in North Bohemian chalk. A special equipment was developed for the controlled preparation of a hardening mixture. The composition of the fill is determined by the strength of the filled rock, expecially by the standard strength, i.e., the minimal strength of the filling under uniaxial pressure. The said parameter determines the consumption of binding materials and thereby the total costs of the filling. A description is presented of the filling technology, including rabbit tube transport of the mixture and quality control. (Pu)

Gas-filled hohlraum fabrication

International Nuclear Information System (INIS)

Salazar, M.A.; Gobby, P.L.; Foreman, L.R.; Bush, H. Jr.; Gomez, V.M.; Moore, J.E.; Stone, G.F.

1995-01-01

Los Alamos National Laboratory (LANL) researchers have fabricated and fielded gas-filled hohlraums at the Lawrence Livermore National Laboratory (LLNL) Nova laser. Fill pressures of 1--5 atmospheres have been typical. We describe the production of the parts, their assembly and fielding. Emphasis is placed on the production of gas-tight polyimide windows and the fielding apparatus and procedure

NSLS-II filling pattern measurement

International Nuclear Information System (INIS)

Yong Hu; Dalesio, L.B.; Kiman Ha; Pinayev, I.

2012-01-01

Multi-bunch injection will be deployed at NSLS-II. High bandwidth diagnostic beam monitors with high speed digitizers are used to measure bunch-by-bunch charge variation. In order to minimize intensity-correlated orbit oscillations due to uneven bunch patterns, we need to measure the filling pattern (also named bunch pattern or bunch structure). This paper focuses on filling pattern measurements: how to measure bunch structure and make this information available in EPICS-based control system. This measurement requires combination of 3 types of beam monitors (Wall Current Monitor, Fast Current Transformer and Beam Position Monitor), data acquisition and controls (fast digitizer, EPICS software, etc.) and Event Timing system. High-bandwidth filling pattern monitor requires high-speed digitizer to sample its analog output signal. The evaluation results of commercial fast digitizer Agilent Acqiris and high bandwidth detector Bergoz FCT are presented. We have also tested the algorithm software for filling pattern measurement as well as the interface to event timing system. It appears that filling pattern measurement system is well understood and the tests for control hardware and software have given good results

The prototype GAPS (pGAPS) experiment

International Nuclear Information System (INIS)

Mognet, S.A.I.; Aramaki, T.; Bando, N.; Boggs, S.E.; Doetinchem, P. von; Fuke, H.; Gahbauer, F.H.; Hailey, C.J.; Koglin, J.E.; Madden, N.; Mori, K.; Okazaki, S.; Ong, R.A.; Perez, K.M.; Tajiri, G.; Yoshida, T.; Zweerink, J.

2014-01-01

The General Antiparticle Spectrometer (GAPS) experiment is a novel approach for the detection of cosmic ray antiparticles. A prototype GAPS (pGAPS) experiment was successfully flown on a high-altitude balloon in June of 2012. The goals of the pGAPS experiment were: to test the operation of lithium drifted silicon (Si(Li)) detectors at balloon altitudes, to validate the thermal model and cooling concept needed for engineering of a full-size GAPS instrument, and to characterize cosmic ray and X-ray backgrounds. The instrument was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The flight lasted a total of 6 h, with over 3 h at float altitude (∼33km). Over one million cosmic ray triggers were recorded and all flight goals were met or exceeded

Review of fill mining technology in Canada

Energy Technology Data Exchange (ETDEWEB)

Singh, K. H.; Hedley, D. G.F.

1980-05-15

The Canadian mining industry has a long history of being in the fore-front in developing new technology in underground hardrock mines. Examples include the development of hydraulic and cemented fills, undercut-and-fill, mechanized cut-and-fill, post pillar, vertical retreat and blasthole mining methods. The evolution of this technology is briefly described in an historical review. Backfill serves many functions, although it is generally considered in terms of its support capabilities. These functions, mainly related to the mining method used, are evaluated in regard to regional support, pillar support, fill roof, working floor, dilution control and waste disposal. With the advent of blasthole and vertical retreat methods for pillar recovery operations, the freestanding height of backfill walls has assumed greater importance. Consequently, more attention is being given to what fill properties are required to achieve fill wall exposures up to 25 m wide by 90 m high. With the large increases in energy costs, alternatives to partially replace Portland cement in fill are being examined. The validation of mining concepts and the interaction of backfill is perhaps best evaluated by in-situ measurements. Examples are given of stress, deformation and fill pressure measurements in longitudinal cut-and-fill, post pillar mining and blasthole stoping with delayed fill which were taken in several mines in Canada. Finally, the overall design procedure used in deciding mining method, stope and pillar dimensions, sequence of extraction, fill properties and support systems at a new mine is described.

The 'third wave' of HIV prevention: filling gaps in integrated interventions, knowledge, and funding.

Science.gov (United States)

Sepúlveda, Jaime

2012-07-01

There is growing optimism in the global health community that the HIV epidemic can be halted. After decades of relying primarily on behavior change to prevent HIV transmission, a second generation of prevention efforts based on medical or biological interventions such as male circumcision and preexposure prophylaxis--the use of antiretroviral drugs to protect uninfected, at-risk individuals--has shown promising results. This article calls for a third generation of HIV prevention efforts that would integrate behavioral, biological, and structural interventions focused on the social, political, and environmental underpinnings of the epidemic, making use of local epidemiological evidence to target affected populations. In this third wave, global programs should deliver HIV prevention services together with cost-effective interventions for reproductive health and for tuberculosis, malaria, and other diseases. Additionally, new efforts are needed to address gaps in HIV prevention research, evaluation, and implementation. Increased and sustained funding, along with evidence-based allocation of funds, will be necessary to accelerate the decline in new HIV infections.

47 CFR 69.119 - Basic service element expedited approval process.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Basic service element expedited approval process. 69.119 Section 69.119 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) ACCESS CHARGES Computation of Charges § 69.119 Basic service element...

Education and Outreach from the JOIDES Resolution during IODP Expedition 360 : linking onboard research and classroom activities during and after the Expedition.

Science.gov (United States)

Burgio, M.; Zhang, J.; Kavanagh, L.; Martinez, A. O.; Expedition 360 Scientists, I.

2016-12-01

The International Ocean Discovery Program (IODP) expeditions provide an excellent opportunity for onboard Education Officers (EO) to communicate and disseminate exciting shipboard research and discoveries to students around the world. During expedition 360, the EOs carried out 140 live webcasts, using different strategies to create an effective link between both students and scientists. Below are examples of strategies we used: -Primary school: The Beauty of Gabbro! and Life in the rocks! During the webcasts, students could virtually tour the ship, interview scientists, and see and discuss samples of the cored gabbro and minerals in thin sections. Artistic contextualization by J. Zhang, facilitated these activities. Moreover, highlighting the search for microbes in the Earth's crust , was particularly successful in engaging the students. -Middle and High school: Fun and relationships in science. Students were able to email expert scientists in the scientific discipline they chose to research and interview them during a live webcast. Some students created a song about the expedition. "on the boat - cup song - IODP project" https://www.youtube.com/watch?v=qex-w9aSV7c-University: Travels, research and the everyday life of professors onboard. We used webcasts to connect with universities in France, Japan and Italy, to create vibrant interactions between students and scientists that enabled students to get closer to their professors and understand better the life of onboard researchers. In collaboration with the science party we developed new strategies to keep in touch with students after completion of the cruise. We generated teaching kits consisting of pedaqgoical sets of pictures, exercises using onboard data, a continuously updated map "tracking geologists", and live webcasts to be organized from laboratories to schools. We already have had enthusiastic feedback from teachers that took part in our webcasts and the challenge is to continue to foster the

FP-LAPW calculations of the elastic, electronic and thermoelectric properties of the filled skutterudite CeRu4Sb12

International Nuclear Information System (INIS)

Shankar, A.; Rai, D.P.; Chettri, Sandeep; Khenata, R.; Thapa, R.K.

2016-01-01

We have investigated the electronic structure, elastic and thermoelectric properties of the filled skutterudite CeRu 4 Sb 12 using the density functional theory (DFT). The full potential linearized augmented plane wave (FP-LAPW) method within a framework of the generalized gradient approximation (GGA) approach is used to perform the calculations presented here. The electronic structure calculation suggests an indirect band gap semiconducting nature of the material with energy band gap of 0.08 eV. The analysis of the elastic constants at relaxed positions reveals the ductile nature of the sample material with covalent contribution in the inter-atomic bonding. The narrow band gap semiconducting nature with high value of Seebeck coefficient suggests the possibility of the thermoelectric application of the material. The analysis of the thermal transport properties confirms the result obtained from the energy band structure of the material with high thermopower and dimensionless figure of merit 0.19 at room temperature.

Text-Filled Stacked Area Graphs

DEFF Research Database (Denmark)

Kraus, Martin

2011-01-01

-filled stacked area graphs; i.e., graphs that feature stacked areas that are filled with small-typed text. Since these graphs allow for computing the text layout automatically, it is possible to include large amounts of textual detail with very little effort. We discuss the most important challenges and some...... solutions for the design of text-filled stacked area graphs with the help of an exemplary visualization of the genres, publication years, and titles of a database of several thousand PC games....

Mass-transfer studies in an electrochemical reactor with a small interelectrode gap

International Nuclear Information System (INIS)

Colli, A.N.; Toelzer, R.; Bergmann, M.E.H.; Bisang, J.M.

2013-01-01

Highlights: • Turbulence promoters increase from two to eight times the mass-transfer coefficients. • Turbulence promoters become more uniform the mass-transfer distribution. • Expanded plastics with an open structure are appropriate as turbulence promoters. -- Abstract: This paper reports the distribution of the local mass-transfer coefficient along the electrode length for an electrochemical reactor with parallel-plate electrodes and narrow interelectrode gaps of 1 and 2.2 mm, using the reduction of ferricyanide as a test reaction. The studies were performed at different flow rates, Reynolds numbers ranging from 370 to 3700, with the empty reactor and also the interelectrode gap was filled with two types of expanded plastics and a woven plastic mesh as turbulence promoters. The effect of both the interelectrode gap and the partial placing of the turbulence promoter along the electrode length on the mass-transfer behaviour was also analyzed. In all cases the pressure drop across the reactor was measured. A more uniform distribution of the local mass-transfer coefficient, ±15% related to its mean value, and an important increase of the mean mass-transfer coefficient, enhancement factor ranging from 2 to 8, were observed, depending on the type of turbulence promoter, the volumetric flow rate, and the interelectrode gap

Magnetic Susceptibility as a Tool for Investigating Igneous Rocks—Experience from IODP Expedition 304

Directory of Open Access Journals (Sweden)

Roger C. Searle

2008-07-01

Full Text Available Continuous measurements of magnetic susceptibility have been commonly used on Ocean Drilling Program (ODP and Integrated Ocean Drilling Program (IODPexpeditions to study minor lithological variations (forexample, those related to climatic cycles in sedimentary rocks, but they have been less frequently used on igneous rocks, although important post-cruise studies have utilized them (e.g., Ildefonse and Pezard, 2001. Here I report its use (and that of the closely related electrical conductivity on IODP Expedition 304 to examine igneous crustal rocks. Expedition 304/305 targeted the Atlantis Massif, an oceanic core complex on the Mid-Atlantic Ridge, and recovered a suite of igneous rocks comprising mainly gabbros, troctolites, and some diabases (Blackman et al., 2006; Ildefonse et al., 2006, 2007; IODP Expeditions 304 and 305 Scientists, 2005. Shipboard measurements (on D/V JOIDES Resolution of physical properties were made to characterize lithological units and alteration products, to correlate cored material with down-hole logging data, and to interpret broader-scale geophysical data.

A Strategic Examination of the Punitive Expedition into Mexico, 1916-1917

National Research Council Canada - National Science Library

Cyrulik, John

2003-01-01

This thesis examines the strategy of the United States Army's Punitive Expedition into Mexico following the raid on Columbus, New Mexico, by Francisco Pancho Villa and his followers on 9 March 1916...

ASTER Expedited L1A Reconstructed Unprocessed Instrument Data V003

Data.gov (United States)

National Aeronautics and Space Administration — The ASTER Expedited L1A Reconstructed Unprocessed Instrument Data is produced with the express purpose of providing the ASTER Science Team members and others, data...

A Web-Disseminated Self-Help and Peer Support Program Could Fill Gaps in Mental Health Care: Lessons From a Consumer Survey

Science.gov (United States)

Banschback, Kaitlin; Santorelli, Gennarina D; Constantino, Michael J

2017-01-01

Background Self-guided mental health interventions that are disseminated via the Web have the potential to circumvent barriers to treatment and improve public mental health. However, self-guided interventions often fail to attract consumers and suffer from user nonadherence. Uptake of novel interventions could be improved by consulting consumers from the beginning of the development process in order to assess their interest and their preferences. Interventions can then be tailored using this feedback to optimize appeal. Objective The aim of our study was to determine the level of public interest in a new mental health intervention that incorporates elements of self-help and peer counseling and that is disseminated via a Web-based training course; to identify predictors of interest in the program; and to identify consumer preferences for features of Web-based courses and peer support programs. Methods We surveyed consumers via Amazon’s Mechanical Turk to estimate interest in the self-help and peer support program. We assessed associations between demographic and clinical characteristics and interest in the program, and we obtained feedback on desired features of the program. Results Overall, 63.9% (378/592) of respondents said that they would try the program; interest was lower but still substantial among those who were not willing or able to access traditional mental health services. Female gender, lower income, and openness to using psychotherapy were the most consistent predictors of interest in the program. The majority of respondents, although not all, preferred romantic partners or close friends as peer counselors and would be most likely to access the program if the training course were accessed on a stand-alone website. In general, respondents valued training in active listening skills. Conclusions In light of the apparent public interest in this program, Web-disseminated self-help and peer support interventions have enormous potential to fill gaps in

The prototype GAPS (pGAPS) experiment

Energy Technology Data Exchange (ETDEWEB)

Mognet, S.A.I., E-mail: mognet@astro.ucla.edu [University of California, Los Angeles, CA 90095 (United States); Aramaki, T. [Columbia University, New York, NY 10027 (United States); Bando, N. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Boggs, S.E.; Doetinchem, P. von [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States); Fuke, H. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Gahbauer, F.H.; Hailey, C.J.; Koglin, J.E.; Madden, N. [Columbia University, New York, NY 10027 (United States); Mori, K.; Okazaki, S. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Ong, R.A. [University of California, Los Angeles, CA 90095 (United States); Perez, K.M.; Tajiri, G. [Columbia University, New York, NY 10027 (United States); Yoshida, T. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Zweerink, J. [University of California, Los Angeles, CA 90095 (United States)

2014-01-21

The General Antiparticle Spectrometer (GAPS) experiment is a novel approach for the detection of cosmic ray antiparticles. A prototype GAPS (pGAPS) experiment was successfully flown on a high-altitude balloon in June of 2012. The goals of the pGAPS experiment were: to test the operation of lithium drifted silicon (Si(Li)) detectors at balloon altitudes, to validate the thermal model and cooling concept needed for engineering of a full-size GAPS instrument, and to characterize cosmic ray and X-ray backgrounds. The instrument was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The flight lasted a total of 6 h, with over 3 h at float altitude (∼33km). Over one million cosmic ray triggers were recorded and all flight goals were met or exceeded.

Psychosocial issues during an expedition to Mars

Science.gov (United States)

Kanas, Nick

2014-10-01

Much is known about psychological and interpersonal issues affecting astronauts participating in manned space missions near the Earth. But in a future long-distance, long-duration expedition to Mars, additional stressors will occur that will result in psychological, psychiatric, and interpersonal effects on the crew, both negative and positive. This paper will review what is known about important psychosocial issues in space and will extrapolate them to the scenario of a future manned space mission to Mars.

Pandemic influenza and health system resource gaps in Bali: an analysis through a resource transmission dynamics model.

Science.gov (United States)

Adisasmito, Wiku; Hunter, Benjamin M; Krumkamp, Ralf; Latief, Kamal; Rudge, James W; Hanvoravongchai, Piya; Coker, Richard J

2015-03-01

The failure to contain pandemic influenza A(H1N1) 2009 in Mexico has shifted global attention from containment to mitigation. Limited surveillance and reporting have, however, prevented detailed assessment of mitigation during the pandemic, particularly in low- and middle-income countries. To assess pandemic influenza case management capabilities in a resource-limited setting, the authors used a health system questionnaire and density-dependent, deterministic transmission model for Bali, Indonesia, determining resource gaps. The majority of health resources were focused in and around the provincial capital, Denpasar; however, gaps are found in every district for nursing staff, surgical masks, and N95 masks. A relatively low pathogenicity pandemic influenza virus would see an overall surplus for physicians, antivirals, and antimicrobials; however, a more pathogenic virus would lead to gaps in every resource except antimicrobials. Resources could be allocated more evenly across Bali. These, however, are in short supply universally and therefore redistribution would not fill resource gaps. © 2011 APJPH.

Expeditions to Komsomolets in 1993 and 1994; Tokt til Komsomolets i 1993 og 1994

Energy Technology Data Exchange (ETDEWEB)

Kolstad, A.K.

1995-09-01

The Russian nuclear submarine Komsomolets went down about 180 km southwest of the Bear Island in the Norwegian Sea on April 7, 1989. According to Russian information the submarine contains one nuclear reactor and two torpedoes with nuclear warheads. The Norwegian Radiation Protection Authority has taken part in the Russian expeditions to the accident site since 1991. This is a report from the expeditions in 1993 and 1994. It includes sampling, analysis and results obtained by the Norwegian part. 5 refs., 4 figs., 5 tabs.

Power supplies and equipment for military field research: lessons from the British Service Dhaulagiri Research Expedition 2016.

Science.gov (United States)

Howard, Matt; Bakker-Dyos, J; Gallagher, L; O'Hara, J P; Woods, D; Mellor, A

2018-02-01

The British Service Dhaulagiri Research Expedition (BSDMRE) took place from 27 March to 31 May 2016. The expedition involved 129 personnel, with voluntary participation in nine different study protocols. Studies were conducted in three research camps established at 3600, 4600 and 5140 m and involved taking and storing blood samples, cardiac echocardiography and investigations involving a balance plate. Research in this remote environment requires careful planning in order to provide a robust and resilient power plan. In this paper we aim to report the rationale for the choices we made in terms of power supply, the equipment used and potential military applicability. This is a descriptive account from the expedition members involved in planning and conducting the medical research. Power calculations were used to determine estimates of requirement prior to the expedition. The primary sources used to generate power were internal combustion engine (via petrol fuelled electric generators) and solar panels. Having been generated, power was stored using lithium-ion batteries. Special consideration was given to the storage of samples taken in the field, for which electric freezers and dry shippers were used. All equipment used functioned well during the expedition, with the challenges of altitude, temperature and transport all overcome due to extensive prior planning. Power was successfully generated, stored and delivered during the BSDMRE, allowing extensive medical research to be undertaken. The challenges faced and overcome are directly applicable to delivering military medical care in austere environments, and lessons learnt can help with the planning and delivery of future operations, training exercises or expeditions. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

7 CFR 58.923 - Filling containers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Filling containers. 58.923 Section 58.923 Agriculture... Procedures § 58.923 Filling containers. (a) The filling of small containers with product shall be done in a sanitary manner. The containers shall not contaminate or detract from the quality of the product in any way...

40 CFR 26.1110 - Expedited review procedures for certain kinds of research involving no more than minimal risk...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Expedited review procedures for certain....1110 Section 26.1110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PROTECTION OF... Intentional Exposure of Non-pregnant, Non-nursing Adults § 26.1110 Expedited review procedures for certain...

Electronic structure and insulating gap in epitaxial VO2 polymorphs

Directory of Open Access Journals (Sweden)

Shinbuhm Lee

2015-12-01

Full Text Available Determining the origin of the insulating gap in the monoclinic V O2(M1 is a long-standing issue. The difficulty of this study arises from the simultaneous occurrence of structural and electronic transitions upon thermal cycling. Here, we compare the electronic structure of the M1 phase with that of single crystalline insulating V O2(A and V O2(B thin films to better understand the insulating phase of VO2. As these A and B phases do not undergo a structural transition upon thermal cycling, we comparatively study the origin of the gap opening in the insulating VO2 phases. By x-ray absorption and optical spectroscopy, we find that the shift of unoccupied t2g orbitals away from the Fermi level is a common feature, which plays an important role for the insulating behavior in VO2 polymorphs. The distinct splitting of the half-filled t2g orbital is observed only in the M1 phase, widening the bandgap up to ∼0.6 eV. Our approach of comparing all three insulating VO2 phases provides insight into a better understanding of the electronic structure and the origin of the insulating gap in VO2.

Social interaction and pain: An arctic expedition.

Science.gov (United States)

Block, Per; Heathcote, Lauren C; Burnett Heyes, Stephanie

2018-01-01

Complex human behaviour can only be understood within its social environment. However, disentangling the causal links between individual outcomes and social network position is empirically challenging. We present a research design in a closed real-world setting with high-resolution temporal data to understand this interplay within a fundamental human experience - physical pain. Study participants completed an isolated 3-week hiking expedition in the Arctic Circle during which they were subject to the same variation in environmental conditions and only interacted amongst themselves. Adolescents provided daily ratings of pain and social interaction partners. Using longitudinal network models, we analyze the interplay between social network position and the experience of pain. Specifically, we test whether experiencing pain is linked to decreasing popularity (increasing isolation), whether adolescents prefer to interact with others experiencing similar pain (homophily), and whether participants are increasingly likely to report similar pain as their interaction partners (contagion). We find that reporting pain is associated with decreasing popularity - interestingly, this effect holds for males only. Further exploratory analyses suggest this is at least partly driven by males withdrawing from contact with females when in pain, enhancing our understanding of pain and masculinity. Contrary to recent experimental and clinical studies, we found no evidence of pain homophily or contagion in the expedition group. Copyright © 2018 Elsevier Ltd. All rights reserved.

India National Gas Hydrate Program Expedition 02 Technical Contributions

Science.gov (United States)

Collett, T. S.; Kumar, P.; Shukla, K. M.; Nagalingam, J.; Lall, M. V.; Yamada, Y.; Schultheiss, P. J.; Holland, M.; Waite, W. F.

2017-12-01

The National Gas Hydrate Program Expedition 02 (NGHP-02) was conducted from 3-March-2015 to 28-July-2015 off the eastern coast of India. The primary objective of this expedition was the exploration and discovery of highly saturated gas hydrate occurrences in sand reservoirs that would be targets of future production testing. The first 2 months of the expedition were dedicated to logging while drilling (LWD) operations with a total of 25 holes being drilled and logged. The next 3 months were dedicated to coring operations at 10 of the most promising sites. NGHP-02 downhole logging, coring and formation pressure testing have confirmed the presence of large, highly saturated, gas hydrate accumulations in coarse-grained sand-rich depositional systems throughout the Krishna-Godavari Basin within the regions defined during NGHP-02 as Area-B, Area-C, and Area-E. The nature of the discovered gas hydrate occurrences closely matched pre-drill predictions, confirming the project developed depositional models for the sand-rich depositional facies in the Krishna-Godavari and Mahanadi Basins. The existence of a fully developed gas hydrate petroleum system was established in Area-C of the Krishna-Godavari Basin with the discovery of a large slope-basin interconnected depositional system, including a sand-rich, gas-hydrate-bearing channel-levee prospect at Sites NGHP-02-08 and -09. The acquisition of closely spaced LWD and core holes in the Area-B L1 Block gas hydrate accumulation have provided one of the most complete three-dimensional petrophysical-based views of any known gas hydrate reservoir system in the world. It was concluded that Area-B and Area-C in the area of the greater Krishna-Godavari Basin contain important world-class gas hydrate accumulations and represent ideal sites for consideration of future gas hydrate production testing.

Raman spectra of filled carbon nanotubes

International Nuclear Information System (INIS)

Bose, S.M.; Behera, S.N.; Sarangi, S.N.; Entel, P.

2004-01-01

The Raman spectra of a metallic carbon nanotube filled with atoms or molecules have been investigated theoretically. It is found that there will be a three way splitting of the main Raman lines due to the interaction of the nanotube phonon with the collective excitations (plasmons) of the conduction electrons of the nanotube as well as its coupling with the phonon of the filling material. The positions and relative strengths of these Raman peaks depend on the strength of the electron-phonon interaction, phonon frequency of the filling atom and the strength of interaction of the nanotube phonon and the phonon of the filling atoms. Careful experimental studies of the Raman spectra of filled nanotubes should show these three peaks. It is also shown that in a semiconducting nanotube the Raman line will split into two and should be observed experimentally

A 100-YEAR ANNIVERSARY OF THE RUSSIAN GEOGRAPHIC SOCIETY EXPEDITION TO KAMCHATKA (1908–1910

Directory of Open Access Journals (Sweden)

Vladimir Kotlyakov

2010-01-01

Full Text Available For three centuries, the main task of geography in Russia was gathering information about the geographical features of the country. The unique image of the Russian Geographical Society (RGS is largely due to its expeditionary activities. The RGS Kamchatka Complex Expedition of 1908-1910 was to explore and examine the flora and fauna of the Kamchatka peninsula, mainly in the area of volcanoes. The expedition to Kamchatka played a significant role in promoting science in the Russian Far East. Important scientific and public institutions were founded in this region as a result of this endeavor. Two institutions directly associated with the expedition are the Kamchatka branch of the RGS and the Institute of Volcanology and Seismology (Far Eastern Branch of the Russian Academy of Sciences. These institutions are important members of the Russian scientific community and are well known around the world.

Gas-hydrate-bearing sand reservoir systems in the offshore of India: Results of the India National Gas Hydrate Program Expedition 02

Science.gov (United States)

Kumar, P.; Collett, Timothy S.; Vishwanath, K.; Shukla, K.M.; Nagalingam, J.; Lall, M.V.; Yamada, Y; Schultheiss, P.; Holland, M.

2016-01-01

The India National Gas Hydrate Program Expedition 02 (NGHP-02) was conducted from 3-March-2015 to 28-July-2015 off the eastern coast of India using the deepwater drilling vessel Chikyu. The primary goal of this expedition was to explore for highly saturated gas hydrate occurrences in sand reservoirs that would become targets for future production tests. The first two months of the expedition were dedicated to logging-whiledrilling (LWD) operations, with a total of 25 holes drilled and logged. The next three months were dedicated to coring operations at 10 of the most promising sites. With a total of five months of continuous field operations, the expedition was the most comprehensive dedicated gas hydrate investigation ever undertaken.

Filling regulatory gaps in high seas fisheries: discrete high seas fish stocks, deep-sea fisheries and vulnerable marine ecosystems

NARCIS (Netherlands)

Takei, Y.

2008-01-01

The present study examines the legal regime of high seas fisheries with a view to identifying regulatory gaps. The main research questions are as follows: 1. What general principles are applicable to high seas fisheries?; 2. What implications do these general principles have for new challenges in

Expedition to the 30-km Chernobyl Exclusion Zone and the Utilization of its Experience in Education and Communication

International Nuclear Information System (INIS)

Aszodi, Attila; Yamaji, Bogdan; Silye, Judit; Pazmandi, Tamas

2006-01-01

Between May 28 - June 4, 2005, under the organization of the Hungarian Nuclear Society (HNS) and the Hungarian Young Generation Network (HYGN) - which operates within the framework of the HNS - a scientific expedition visited the Chernobyl Nuclear Power Plant and the surrounding exclusion zone. The participants were young Hungarian nuclear professionals supervised by more experienced experts. The main scientific goals of the expedition were the followings: Get personal experiences in a direct way about the current status of the Chernobyl Power Plant and its surroundings, the contamination of the environment and about the doses. Gather information about the state of the shut down power plant and the shelter built above the damaged 4. unit. Training of young nuclear experts by performing on site measurements. The Hungarian expedition successfully achieved its objectives by performing wide-range of environmental and dosimetric measurements and collecting numerous biological and soil samples. Within the 30-km exclusion zone the influence of the accident occurred 20 years ago still could be measured clearly; however the level of the radioactivity is manageable in most places. The dosimetric measurements showed that no considerable exposure occurred among the members of the expedition. The analysis of samples has been started at the International Chernobyl Center in Slavutich. During the expedition not only environmental sampling and in-situ measurements were carried out but it was also well documented with photos and video recordings for educational, training and PR purposes. A documentary TV film was recorded during the expedition. The first-hand knowledge acquired during the expedition helps the authentic communication of the accident and its present-day consequences, which is especially important in 2006, 20 years after the Chernobyl accident. Since Ukraine and Hungary are neighbor countries the media constantly discuss the accident, the consequences and the risks of

20 CFR 405.710 - How to request an expedited appeal.

Science.gov (United States)

2010-04-01

... Section 405.710 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Expedited Appeals Process for Constitutional Issues § 405.710 How to... process, you must request it— (1) No later than 60 days after the date you receive notice of the Federal...

Joint pricing and inventory replenishment decisions with returns and expediting

NARCIS (Netherlands)

Zhu, Stuart X.

2012-01-01

We study a single-item periodic-review model for the joint pricing and inventory replenishment problem with returns and expediting. Demand in consecutive periods are independent random variables and their distributions are price sensitive. At the end of each period, after the demand is realized, a

Student Experiences: the 2013 Cascadia Initiative Expedition Team's Apply to Sail Program

Science.gov (United States)

Mejia, H.; Hooft, E. E.; Fattaruso, L.

2013-12-01

During the summer of 2013, the Cascadia Initiative Expedition Team led six oceanographic expeditions to recover and redeploy ocean bottom seismometers (OBSs) across the Cascadia subduction zone and Juan de Fuca plate. The Cascadia Initiative (CI) is an onshore/offshore seismic and geodetic experiment to study questions ranging from megathrust earthquakes to volcanic arc structure to the formation, deformation and hydration of the Juan de Fuca and Gorda plates with the overarching goal of understanding the entire subduction zone system. The Cascadia Initiative Expedition Team is a team of scientists charged with leading the oceanographic expeditions to deploy and recover CI OBSs and developing the associated Education and Outreach effort. Students and early career scientists were encouraged to apply to join the cruises via the Cascadia Initiative Expedition Team's Apply to Sail Program. The goal of this call for open participation was to help expand the user base of OBS data by providing opportunities for students and scientists to directly experience at-sea acquisition of OBS data. Participants were required to have a strong interest in learning field techniques, be willing to work long hours at sea assisting in OBS deployment, recovery and preliminary data processing and have an interest in working with the data collected. In total, there were 51 applicants to the Apply to Sail Program from the US and 4 other countries; 21 graduate students as well as a few undergraduate students, postdocs and young scientists from the US and Canada were chosen to join the crew. The cruises lasted from 6 to 14 days in length. OBS retrievals comprised the three first legs, of which the first two were aboard the Research Vessel Oceanus. During each of the retrievals, multiple acoustic signals were sent while the vessel completed a semi-circle around the OBS to accurately determine its position, a final signal was sent to drop the seismometer's anchor, and finally the ship and crew

DCS: A Case Study of Identification of Knowledge and Disposition Gaps Using Principles of Continuous Risk Management

Science.gov (United States)

Norcross, Jason; Steinberg, Susan; Kundrot, Craig; Charles, John

2011-01-01

The Human Research Program (HRP) is formulated around the program architecture of Evidence-Risk-Gap-Task-Deliverable. Review of accumulated evidence forms the basis for identification of high priority risks to human health and performance in space exploration. Gaps in knowledge or disposition are identified for each risk, and a portfolio of research tasks is developed to fill them. Deliverables from the tasks inform the evidence base with the ultimate goal of defining the level of risk and reducing it to an acceptable level. A comprehensive framework for gap identification, focus, and metrics has been developed based on principles of continuous risk management and clinical care. Research towards knowledge gaps improves understanding of the likelihood, consequence or timeframe of the risk. Disposition gaps include development of standards or requirements for risk acceptance, development of countermeasures or technology to mitigate the risk, and yearly technology assessment related to watching developments related to the risk. Standard concepts from clinical care: prevention, diagnosis, treatment, monitoring, rehabilitation, and surveillance, can be used to focus gaps dealing with risk mitigation. The research plan for the new HRP Risk of Decompression Sickness (DCS) used the framework to identify one disposition gap related to establishment of a DCS standard for acceptable risk, two knowledge gaps related to DCS phenomenon and mission attributes, and three mitigation gaps focused on prediction, prevention, and new technology watch. These gaps were organized in this manner primarily based on target for closure and ease of organizing interim metrics so that gap status could be quantified. Additional considerations for the knowledge gaps were that one was highly design reference mission specific and the other gap was focused on DCS phenomenon.

Understanding the cell-to-module efficiency gap in Cu(In,Ga)(S,Se)2 photovoltaics scale-up

Science.gov (United States)

Bermudez, Veronica; Perez-Rodriguez, Alejandro

2018-06-01

Cu(In,Ga)(S,Se)2 (CIGS) solar cells show record efficiencies comparable to those of crystalline Si-based technologies. Their industrial module production costs are also comparable to those of Si photovoltaics in spite of their much lower production volume. However, the competitiveness of CIGS is compromised by the difference in performance between cell and module scales, known as the cell-to-module efficiency gap, which is significantly higher than in competing industrial photovoltaic technologies. In this Review, we quantify the main cell-to-module efficiency loss mechanisms and discuss the various strategies explored in academia and industry to reduce the efficiency gap: new transparent conductive oxides, hybrid modularization approaches and the use of wide-bandgap solar absorbers in the 1.4-1.5 eV range. To implement these strategies, research gaps relating to various device layers need to be filled.

Behavioral Issues Associated With Long Duration Space Expeditions: Review and Analysis of Astronaut Journals

Science.gov (United States)

Struster, Jack

2010-01-01

Personal journals maintained by NASA astronauts during six-month expeditions onboard the International Space Station were analyzed to obtain information concerning a wide range of behavioral and human factors issues. Astronauts wrote most about their work, followed by outside communications (with mission control, family, and friends), adjustment to the conditions, interactions with crew mates, recreation/leisure, equipment (installation, maintenance), events (launches, docking, hurricanes, etc.), organization/management, sleep, and food. The study found evidence of a decline in morale during the third quarters of the missions and identified key factors that contribute to sustained adjustment and optimal performance during long-duration space expeditions. Astronauts reported that they benefited personally from writing in their journals because it helped maintain perspective on their work and relations with others. Responses to questions asked before, during, and after the expeditions show that living and working onboard the ISS is not as difficult as the astronauts anticipate before starting their six-month tours of duty. Recommendations include application of study results and continuation of the experiment to obtain additional data as crew size increases and operations evolve.

21 CFR 1.383 - What expedited procedures apply when FDA initiates a seizure action against a detained perishable...

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false What expedited procedures apply when FDA initiates a seizure action against a detained perishable food? 1.383 Section 1.383 Food and Drugs FOOD AND... Administrative Detention of Food for Human or Animal Consumption General Provisions § 1.383 What expedited...

Filling a gap: Public talks about earthquake preparation and the 'Big One'

Science.gov (United States)

Reinen, L. A.

2013-12-01

Residents of southern California are aware they live in a seismically active area and earthquake drills have trained us to Duck-Cover-Hold On. While many of my acquaintance are familiar with what to do during an earthquake, few have made preparations for living with the aftermath of a large earthquake. The ShakeOut Scenario (Jones et al., USGS Open File Report 2008-1150) describes the physical, social, and economic consequences of a plausible M7.8 earthquake on the southernmost San Andreas Fault. While not detailing an actual event, the ShakeOut Scenario illustrates how individual and community preparation may improve the potential after-affects of a major earthquake in the region. To address the gap between earthquake drills and preparation in my community, for the past several years I have been giving public talks to promote understanding of: the science behind the earthquake predictions; why individual, as well as community, preparation is important; and, ways in which individuals can prepare their home and work environments. The public presentations occur in an array of venues, including elementary school and college classes, a community forum linked with the annual ShakeOut Drill, and local businesses including the local microbrewery. While based on the same fundamental information, each presentation is modified for audience and setting. Assessment of the impact of these talks is primarily anecdotal and includes an increase in the number of venues requesting these talks, repeat invitations, and comments from audience members (sometimes months or years after a talk). I will present elements of these talks, the background information used, and examples of how they have affected change in the earthquake preparedness of audience members. Discussion and suggestions (particularly about effective means of conducting rigorous long-term assessment) are strongly encouraged.

Ultrafast Gap Dynamics and Electronic Interactions in a Photoexcited Cuprate Superconductor

Directory of Open Access Journals (Sweden)

S. Parham

2017-10-01

Full Text Available We perform time- and angle-resolved photoemission spectroscopy (trARPES on optimally doped Bi_{2}Sr_{2}CaCu_{2}O_{8+δ} (BSCCO-2212 using sufficient energy resolution (9 meV to resolve the k-dependent near-nodal gap structure on time scales where the concept of an electronic pseudotemperature is a useful quantity, i.e., after electronic thermalization has occurred. We study the ultrafast evolution of this gap structure, uncovering a very rich landscape of decay rates as a function of angle, temperature, and energy. We explicitly focus on the quasiparticle states at the gap edge as well as on the spectral weight inside the gap that “fills” the gap—understood as an interaction, or self-energy effect—and we also make high resolution measurements of the nodal states, enabling a direct and accurate measurement of the electronic temperature (or pseudotemperature of the electrons in the system. Rather than the standard method of interpreting these results using individual quasiparticle scattering rates that vary significantly as a function of angle, temperature, and energy, we show that the entire landscape of relaxations can be understood by modeling the system as following a nonequilibrium, electronic pseudotemperature that controls all electrons in the zone. Furthermore, this model has zero free parameters, as we obtain the crucial information of the SC gap Δ and the gap-filling strength Γ_{TDoS} by connecting to static ARPES measurements. The quantitative and qualitative agreement between data and model suggests that the critical parameters and interactions of the system, including the pairing interactions, follow parametrically from the electronic pseudotemperature. We expect that this concept will be relevant for understanding the ultrafast response of a great variety of electronic materials, even though the electronic pseudotemperature may not be directly measurable.

Exploring Values and Personal and Social Development: Learning through Expeditions

Science.gov (United States)

Allison, Peter; Von Wald, Kris

2010-01-01

Travel and overseas experiences, particularly those involving some form of outdoor education, are regarded by many young people, parents, university admissions and employers as somehow beneficial to a young person's development. Often, expedition experiences are happening at crucial times in life (the teen years) when metaphysical (rather than…

Utilizing the International GeoSample Number Concept during ICDP Expedition COSC

Science.gov (United States)

Conze, Ronald; Lorenz, Henning; Ulbricht, Damian; Gorgas, Thomas; Elger, Kirsten

2016-04-01

The concept of the International GeoSample Number (IGSN) was introduced to uniquely identify and register geo-related sample material, and make it retrievable via electronic media (e.g., SESAR - http://www.geosamples.org/igsnabout). The general aim of the IGSN concept is to improve accessing stored sample material worldwide, enable the exact identification, its origin and provenance, and also the exact and complete citation of acquired samples throughout the literature. The ICDP expedition COSC (Collisional Orogeny in the Scandinavian Caledonides, http://cosc.icdp-online.org) prompted for the first time in ICDP's history to assign and register IGSNs during an ongoing drilling campaign. ICDP drilling expeditions are using commonly the Drilling Information System DIS (http://doi.org/10.2204/iodp.sd.4.07.2007) for the inventory of recovered sample material. During COSC IGSNs were assigned to every drill hole, core run, core section, and sample taken from core material. The original IGSN specification has been extended to achieve the required uniqueness of IGSNs with our offline-procedure. The ICDP name space indicator and the Expedition ID (5054) are forming an extended prefix (ICDP5054). For every type of sample material, an encoded sequence of characters follows. This sequence is derived from the DIS naming convention which is unique from the beginning. Thereby every ICDP expedition has an unlimited name space for IGSN assignments. This direct derivation of IGSNs from the DIS database context ensures the distinct parent-child hierarchy of the IGSNs among each other. In the case of COSC this method of inventory-keeping of all drill cores was done routinely using the ExpeditionDIS during field work and subsequent sampling party. After completing the field campaign, all sample material was transferred to the "Nationales Bohrkernlager" in Berlin-Spandau, Germany. Corresponding data was subsequently imported into the CurationDIS used at the aforementioned core storage

Marine palaemonoid shrimps of the Netherlands Seychelles Expedition 1992-1993

NARCIS (Netherlands)

Fransen, C.H.J.M.

1994-01-01

An account is given of the palaemonoid shrimps collected during an expedition with R/V Tyro to the Seychelles. A total of 59 species is recorded of which two are new to science: Conchodytes pteriae and Jocaste platysoma. 25 species were not previously recorded from the Seychelles. A checklist of

FP-LAPW calculations of the elastic, electronic and thermoelectric properties of the filled skutterudite CeRu{sub 4}Sb{sub 12}

Energy Technology Data Exchange (ETDEWEB)

Shankar, A., E-mail: amitshan2009@gmail.com [Condensed Matter Theory Group, Department of Physics, Mizoram University, 796004 (India); Rai, D.P. [Department of Physics, Pachhunga University College, Aizawl 796001 (India); Chettri, Sandeep [Condensed Matter Theory Group, Department of Physics, Mizoram University, 796004 (India); Khenata, R. [Laboratoire de Physique Quantique et de Modélisation Mathématique (LPQ3M), Département de Technologie, Université de Mascara, 29000 (Algeria); Thapa, R.K. [Condensed Matter Theory Group, Department of Physics, Mizoram University, 796004 (India)

2016-08-15

We have investigated the electronic structure, elastic and thermoelectric properties of the filled skutterudite CeRu{sub 4}Sb{sub 12} using the density functional theory (DFT). The full potential linearized augmented plane wave (FP-LAPW) method within a framework of the generalized gradient approximation (GGA) approach is used to perform the calculations presented here. The electronic structure calculation suggests an indirect band gap semiconducting nature of the material with energy band gap of 0.08 eV. The analysis of the elastic constants at relaxed positions reveals the ductile nature of the sample material with covalent contribution in the inter-atomic bonding. The narrow band gap semiconducting nature with high value of Seebeck coefficient suggests the possibility of the thermoelectric application of the material. The analysis of the thermal transport properties confirms the result obtained from the energy band structure of the material with high thermopower and dimensionless figure of merit 0.19 at room temperature.

TCGA Expedition: A Data Acquisition and Management System for TCGA Data.

Directory of Open Access Journals (Sweden)

Uma R Chandran

Full Text Available The Cancer Genome Atlas Project (TCGA is a National Cancer Institute effort to profile at least 500 cases of 20 different tumor types using genomic platforms and to make these data, both raw and processed, available to all researchers. TCGA data are currently over 1.2 Petabyte in size and include whole genome sequence (WGS, whole exome sequence, methylation, RNA expression, proteomic, and clinical datasets. Publicly accessible TCGA data are released through public portals, but many challenges exist in navigating and using data obtained from these sites. We developed TCGA Expedition to support the research community focused on computational methods for cancer research. Data obtained, versioned, and archived using TCGA Expedition supports command line access at high-performance computing facilities as well as some functionality with third party tools. For a subset of TCGA data collected at University of Pittsburgh, we also re-associate TCGA data with de-identified data from the electronic health records. Here we describe the software as well as the architecture of our repository, methods for loading of TCGA data to multiple platforms, and security and regulatory controls that conform to federal best practices.TCGA Expedition software consists of a set of scripts written in Bash, Python and Java that download, extract, harmonize, version and store all TCGA data and metadata. The software generates a versioned, participant- and sample-centered, local TCGA data directory with metadata structures that directly reference the local data files as well as the original data files. The software supports flexible searches of the data via a web portal, user-centric data tracking tools, and data provenance tools. Using this software, we created a collaborative repository, the Pittsburgh Genome Resource Repository (PGRR that enabled investigators at our institution to work with all TCGA data formats, and to interrogate these data with analysis pipelines, and

South African Climates: Highlights From International Ocean Discovery Program Expedition 361

Science.gov (United States)

Hemming, S. R.; Hall, I. R.; LeVay, L.

2016-12-01

International Ocean Discovery Program Expedition 361 drilled six sites on the southeast African margin and in the Indian-Atlantic ocean gateway, southwest Indian Ocean, from 30 January to 31 March 2016. In total, 5175 m of core was recovered, with an average recovery of 102%, during 29.7 days of on-site operations. The sites, situated in the Mozambique Channel, at locations directly influenced by discharge from the Zambezi and Limpopo River catchments, the Natal Valley, the Agulhas Plateau, and the Cape Basin were targeted to reconstruct the history of the Greater Agulhas Current System over the past 5 Ma. The Agulhas Current transports 70 Sv of warm and saline surface waters from the tropical Indian Ocean along the East African margin to the tip of Africa. Exchanges of heat and moisture with the atmosphere influence southern African rainfall patterns. Recent ocean model and paleoceanographic data further point at a potential role of the Agulhas Current in controlling the strength and mode of the Atlantic Meridional Overturning Circulation (AMOC) during the Late Pleistocene. The main objectives of the expedition were to document the oceanographic properties of the Agulhas Current through tectonic and climatic changes during the Plio-Pleistocene, to determine the dynamics of the Indian-Atlantic gateway circulation during this time, to examine the connection of the Agulhas leakage and AMOC, to address the influence of the Agulhas Current on African terrestrial climates and potential links to Human evolution. Additionally, the Expedition set out to fulfill the needs of the Ancillary Project Letter, consisting of high-resolution interstitial water samples that will, and to constrain the temperature and salinity profiles of the ocean during the Last Glacial Maximum. Here we highlight some of the expedition successes and show how it has made major strides toward fulfilling each of these objectives. The recovered sequences allowed complete spliced stratigraphic sections

ExpEdit: a webserver to explore human RNA editing in RNA-Seq experiments.

Science.gov (United States)

Picardi, Ernesto; D'Antonio, Mattia; Carrabino, Danilo; Castrignanò, Tiziana; Pesole, Graziano

2011-05-01

ExpEdit is a web application for assessing RNA editing in human at known or user-specified sites supported by transcript data obtained by RNA-Seq experiments. Mapping data (in SAM/BAM format) or directly sequence reads [in FASTQ/short read archive (SRA) format] can be provided as input to carry out a comparative analysis against a large collection of known editing sites collected in DARNED database as well as other user-provided potentially edited positions. Results are shown as dynamic tables containing University of California, Santa Cruz (UCSC) links for a quick examination of the genomic context. ExpEdit is freely available on the web at http://www.caspur.it/ExpEdit/.

77 FR 43492 - Expedited Vocational Assessment Under the Sequential Evaluation Process

Science.gov (United States)

2012-07-25

..., or visit our Internet site, Social Security Online, at http://www.socialsecurity.gov . SUPPLEMENTARY... SOCIAL SECURITY ADMINISTRATION 20 CFR Parts 404 and 416 [Docket No. SSA-2010-0060] RIN 0960-AH26 Expedited Vocational Assessment Under the Sequential Evaluation Process AGENCY: Social Security...

Characterization of vegetative and grain filling periods of winter wheat by stepwise regression procedure. II. Grain filling period

Directory of Open Access Journals (Sweden)

Pržulj Novo

2011-01-01

Full Text Available In wheat, rate and duration of dry matter accumulation and remobilization depend on genotype and growing conditions. The objective of this study was to determine the most appropriate polynomial regression of stepwise regression procedure for describing grain filling period in three winter wheat cultivars. The stepwise regression procedure showed that grain filling is a complex biological process and that it is difficult to offer a simple and appropriate polynomial equation that fits the pattern of changes in dry matter accumulation during the grain filling period, i.e., from anthesis to maximum grain weight, in winter wheat. If grain filling is to be represented with a high power polynomial, quartic and quintic equations showed to be most appropriate. In spite of certain disadvantages, a cubic equation of stepwise regression could be used for describing the pattern of winter wheat grain filling.

ASTER Expedited L1B Registered Radiance at the Sensor V003

Data.gov (United States)

National Aeronautics and Space Administration — The Expedited ASTER Level-1B Registered Radiance at the Sensor data set is produced with the express purpose of providing ASTER Science Team members data of their...

Alternative Certification Pathways: Filling a Gap?

Science.gov (United States)

Ludlow, Carlyn

2013-01-01

The purpose of this article is to examine the proliferation of alternative certification pathways through an analysis of the role and history of teacher certification and supply followed by a synthesis of national, regional, and state research studies on alternative routes to certification programs and a review of studies conducted on well-known…

Filling the gaps with PCO’s

International Nuclear Information System (INIS)

Sen, Ashoke; Witten, Edward

2015-01-01

Superstring perturbation theory is traditionally carried out by using picture-changing operators (PCO’s) to integrate over odd moduli. Naively the PCO’s can be inserted anywhere on a string worldsheet, but actually a constraint must be placed on PCO insertions to avoid spurious singularities. Accordingly, it has been long known that the simplest version of the PCO procedure is valid only locally on the moduli space of Riemann surfaces, and that a correct PCO-based algorithm to compute scattering amplitudes must be based on piecing together local descriptions. Recently, “vertical integration” was proposed as a relatively simple method to do this. Here, we spell out in detail what vertical integration means if carried out systematically. This involves a hierarchical procedure with corrections of high order. One might anticipate such a structure from the viewpoint of super Riemann surfaces.

Filling the gaps with PCO’s

Energy Technology Data Exchange (ETDEWEB)

Sen, Ashoke [Harish-Chandra Research Institute,Chhatnag Road, Jhusi, Allahabad 211019 (India); Witten, Edward [School of Natural Sciences, Institute for Advanced Study,1 Einstein Drive, Princeton, NJ 08540 (United States)

2015-09-01

Superstring perturbation theory is traditionally carried out by using picture-changing operators (PCO’s) to integrate over odd moduli. Naively the PCO’s can be inserted anywhere on a string worldsheet, but actually a constraint must be placed on PCO insertions to avoid spurious singularities. Accordingly, it has been long known that the simplest version of the PCO procedure is valid only locally on the moduli space of Riemann surfaces, and that a correct PCO-based algorithm to compute scattering amplitudes must be based on piecing together local descriptions. Recently, “vertical integration” was proposed as a relatively simple method to do this. Here, we spell out in detail what vertical integration means if carried out systematically. This involves a hierarchical procedure with corrections of high order. One might anticipate such a structure from the viewpoint of super Riemann surfaces.

Filling the gaps with PCO’s

OpenAIRE

Sen, AshokeHarish-Chandra Research Institute, Chhatnag Road, Jhusi, Allahabad, 211019, India; Witten, Edward(School of Natural Sciences, Institute for Advanced Study, 1 Einstein Drive, Princeton, NJ, 08540, U.S.A.)

2015-01-01

Superstring perturbation theory is traditionally carried out by using picture-changing operators (PCO’s) to integrate over odd moduli. Naively the PCO’s can be inserted anywhere on a string worldsheet, but actually a constraint must be placed on PCO insertions to avoid spurious singularities. Accordingly, it has been long known that the simplest version of the PCO procedure is valid only locally on the moduli space of Riemann surfaces, and that a correct PCO-based algorithm to compute scatter...

Early scientific expeditions and local encounters: new perspectives on Carsten Niebuhr and 'The Arabian Journey'

DEFF Research Database (Denmark)

observations were brought back to Europe and communicated both to other scholars and to the general reading public. The contrasts between the “gentleman travellers” or the authors of entertaining travelogues and the scholarly approach of the Danish expedition are also apparent in several accounts. Together...... instructions given to the travellers, many of the most surprising, innovating or lasting results of the expeditions were achieved either due to casual events or in cases where the travellers did not strictly follow the research plans outlined for them, but improvised and grasped unpredicted opportunities...

Revised Late Oligocene to Early Miocene magnetic stratigraphy recorded by drift sediments at Sites U1405 and U1406, IODP Expedition 342 (Newfoundland, NW Atlantic)

Science.gov (United States)

van Peer, Tim; Xuan, Chuang; Wilson, Paul; Liebrand, Diederik; Lippert, Peter

2015-04-01

The nannofossil oozes drilled at IODP Expedition 342 (Paleogene Newfoundland Sediment Drifts) Sites U1405 and U1406 provide an exceptional sedimentary archive of the Late Oligocene to Early Miocene due to high sedimentation rates (2-6 cm/kyr at U1406 and up to 20 cm/kyr at U1405) and their ideal location below the Deep Western Boundary Current. These drift sediment sequences provide a unique opportunity to study the Oligocene-Miocene Transition (OMT) and Mi1-event (a transient 1‰ positive oxygen isotope excursion) at an unprecedented resolution from a Northern Hemisphere perspective. The exact timing of the OMT and its rate of change require a reliable and high-resolution magnetic stratigraphic age control, as Chron C6Cn with its three subchrons roughly spans the Mi1 event and the reversal C6Cn.2n/C6Cn.2r defines the Oligocene-Miocene boundary. Natural Remanent Magnetisation (NRM) was measured on 140 m of u-channel samples at U1405 and 190 m at U1406. The u-channel sample based magnetostratigraphy is in good agreement with that based on the shipboard data and reveal distinctive well-defined patterns of normal and reversed polarities, which can be correlated to the Geomagnetic Polarity Time Scale between C6Bn.2n and C9n (ca. 22.2 to 27 Ma) at U1406 and between C6Bn.2n and C6Cr (ca. 22.2 to 23.5 Ma) at U1405. Furthermore, putative cryptochrons in Chron C6Br and C7Ar, previously reported at Site U1334 (IODP Expedition 320), are observed in the u-channel magnetic stratigraphy for Sites U1405 and U1406. Anhysteretic Remanent Magnetisation (ARM) intensity variations are combined with X-Ray Fluorescence (XRF) generated elemental measurements to refine the shipboard splice of both U1405 and U1406. Latest Oligocene to earliest Miocene splice refinements are complicated by the presence of large-scale stratigraphic gaps (up to 25 m at U1405) unrelated to drilling disturbances. The depth and estimated age of these stratigraphic gaps vary from hole to hole, and do not appear

Radon-domain interferometric interpolation for reconstruction of the near-offset gap in marine seismic data

Science.gov (United States)

Xu, Zhuo; Sopher, Daniel; Juhlin, Christopher; Han, Liguo; Gong, Xiangbo

2018-04-01

In towed marine seismic data acquisition, a gap between the source and the nearest recording channel is typical. Therefore, extrapolation of the missing near-offset traces is often required to avoid unwanted effects in subsequent data processing steps. However, most existing interpolation methods perform poorly when extrapolating traces. Interferometric interpolation methods are one particular method that have been developed for filling in trace gaps in shot gathers. Interferometry-type interpolation methods differ from conventional interpolation methods as they utilize information from several adjacent shot records to fill in the missing traces. In this study, we aim to improve upon the results generated by conventional time-space domain interferometric interpolation by performing interferometric interpolation in the Radon domain, in order to overcome the effects of irregular data sampling and limited source-receiver aperture. We apply both time-space and Radon-domain interferometric interpolation methods to the Sigsbee2B synthetic dataset and a real towed marine dataset from the Baltic Sea with the primary aim to improve the image of the seabed through extrapolation into the near-offset gap. Radon-domain interferometric interpolation performs better at interpolating the missing near-offset traces than conventional interferometric interpolation when applied to data with irregular geometry and limited source-receiver aperture. We also compare the interferometric interpolated results with those obtained using solely Radon transform (RT) based interpolation and show that interferometry-type interpolation performs better than solely RT-based interpolation when extrapolating the missing near-offset traces. After data processing, we show that the image of the seabed is improved by performing interferometry-type interpolation, especially when Radon-domain interferometric interpolation is applied.

Study of gap conductance model for thermo mechanical fully coupled finite element model

International Nuclear Information System (INIS)

Kim, Hyo Cha; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun

2012-01-01

A light water reactor (LWR) fuel rod consists of zirconium alloy cladding and uranium dioxide pellets, with a slight gap between them. Therefore, the mechanical integrity of zirconium alloy cladding is the most critical issue, as it is an important barrier for fission products released into the environment. To evaluate the stress and strain of the cladding during operation, fuel performance codes with a one-dimensional (1D) approach have been reported since the 1970s. However, it is difficult for a 1D model to simulate the stress and strain of the cladding accurately owing to a lack of degree of freedom. A LWR fuel performance code should include thermo-mechanical coupled model owing to the existence of the fuel-cladding gap. Generally, the gap that is filled with helium gas results in temperature drop along radius direction. The gap conductance that determines temperature gradient within the gap is very sensitive to gap thickness. For instance, once the gap size increases up to several microns in certain region, difference of surface temperatures increases up to 100 Kelvin. Therefore, iterative thermo-mechanical coupled analysis is required to solve temperature distribution throughout pellet and cladding. Consequently, the Finite Element (FE) module, which can simulate a higher degree of freedom numerically, is an indispensable requirement to understand the thermomechanical behavior of cladding. FRAPCON-3, which is reliable performance code, has iterative loop for thermo-mechanical coupled calculation to solve 1D gap conductance model. In FEMAXI-III, 1D thermal analysis module and FE module for stress-strain analysis were separated. 1D thermal module includes iterative analysis between them. DIONISIO code focused on thermal contact model as function of surface roughness and contact pressure when the gap is closed. In previous works, gap conductance model has been developed only for 1D model or hybrid model (1D and FE). To simulate temperature, stress and strain

Assessment of imputation methods using varying ecological information to fill the gaps in a tree functional trait database

Science.gov (United States)

Poyatos, Rafael; Sus, Oliver; Vilà-Cabrera, Albert; Vayreda, Jordi; Badiella, Llorenç; Mencuccini, Maurizio; Martínez-Vilalta, Jordi

2016-04-01

Plant functional traits are increasingly being used in ecosystem ecology thanks to the growing availability of large ecological databases. However, these databases usually contain a large fraction of missing data because measuring plant functional traits systematically is labour-intensive and because most databases are compilations of datasets with different sampling designs. As a result, within a given database, there is an inevitable variability in the number of traits available for each data entry and/or the species coverage in a given geographical area. The presence of missing data may severely bias trait-based analyses, such as the quantification of trait covariation or trait-environment relationships and may hamper efforts towards trait-based modelling of ecosystem biogeochemical cycles. Several data imputation (i.e. gap-filling) methods have been recently tested on compiled functional trait databases, but the performance of imputation methods applied to a functional trait database with a regular spatial sampling has not been thoroughly studied. Here, we assess the effects of data imputation on five tree functional traits (leaf biomass to sapwood area ratio, foliar nitrogen, maximum height, specific leaf area and wood density) in the Ecological and Forest Inventory of Catalonia, an extensive spatial database (covering 31900 km2). We tested the performance of species mean imputation, single imputation by the k-nearest neighbors algorithm (kNN) and a multiple imputation method, Multivariate Imputation with Chained Equations (MICE) at different levels of missing data (10%, 30%, 50%, and 80%). We also assessed the changes in imputation performance when additional predictors (species identity, climate, forest structure, spatial structure) were added in kNN and MICE imputations. We evaluated the imputed datasets using a battery of indexes describing departure from the complete dataset in trait distribution, in the mean prediction error, in the correlation matrix

Design Tool for Liquid-Nitrogen Gaps in Superconducting Apparatus

International Nuclear Information System (INIS)

Pace, Marshall O.; Sauers, Isidor; James, David Randy; Tuncer, Enis; Polyzos, Georgios

2011-01-01

For designers of high temperature superconducting equipment with liquid nitrogen as a dielectric, an expedient universal curve is sought that provides breakdown strength for a specified class of electrode shapes, with any practical sizes of electrodes and gap; thus the universal curve fills in missing experimental data. Universal breakdown strength curves at pressures of or slightly above 100 kPa, are being developed for AC, DC or impulse stress for the class with sphere-sphere, plane-plane and sphere-plane gaps, with three independent parameters: the size of each electrode and gap. A user can normalize his parameters and find the corresponding breakdown strength, even though no data were available for his exact dimensions. For AC and DC stresses the geometrical effects of stressed area/volume are incorporated from most published AC and DC experimental data of the last 50 years, by plotting breakdown field versus new geometrical quantities, such that all data fall approximately on or near one normalized universal curve. This avoids the usual difficult task of calculating stressed area and volume effects on the breakdown values for the graph ordinate. For impulse stress a more traditional plot suffices to produce a universal curve. This suggests that area/volume effects might not be so important with impulse stress. If the method proves reliable, it may be possible to determine design parameters for a broad range of geometries, help unify seemingly disparate breakdown data in the literature, and provide easily used, practical guidance for designers.

Iron filled carbon nanostructures from different precursors

International Nuclear Information System (INIS)

Costa, S.; Borowiak-Palen, E.; Bachmatiuk, A.; Ruemmeli, M.H.; Gemming, T.; Kalenczuk, R.J.

2008-01-01

Here, we present a study on the synthesis of different nanostructures with one single-step in situ filling (encapsulation) via carbon vapor deposition (CVD). Ferrocene, acetylferrocene and iron (II) nitrate as iron precursors were explored. The application of each of these compounds resulted in different carbon nanomaterials such as: iron filled multiwalled carbon nanotubes with a low filling ratio (Fe-MWCNT), iron filled nanocapsules and unfilled MWCNT. The as-produced samples were purified by high temperature annealing and acid treatment. The purified materials were characterised using transmission electron microscopy (TEM) and Raman spectroscopy

46 CFR 98.25-65 - Filling density.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Filling density. 98.25-65 Section 98.25-65 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL... § 98.25-65 Filling density. (a) The filling density, or the percent ratio of the liquefied gas that may...

Effect of ultrasonic agitation on push-out bond strength and adaptation of root-end filling materials.

Science.gov (United States)

Alcalde, Murilo Priori; Vivan, Rodrigo Ricci; Marciano, Marina Angélica; Duque, Jussaro Alves; Fernandes, Samuel Lucas; Rosseto, Mariana Bailo; Duarte, Marco Antonio Hungaro

2018-05-01

This study evaluated the effect of ultrasonic agitation of mineral trioxide aggregate (MTA), calcium silicate-based cement (CSC), and Sealer 26 (S26) on adaptation at the cement/dentin interface and push-out bond strength. Sixty maxillary canines were divided into 6 groups ( n = 10): MTA, S26, and CSC, with or without ultrasonic activation (US). After obturation, the apical portions of the teeth were sectioned, and retrograde cavities were prepared and filled with cement by hand condensation. In the US groups, the cement was activated for 60 seconds: 30 seconds in the mesio-distal direction and 30 seconds in the buccal-lingual direction, using a mini Irrisonic insert coupled with the ultrasound transducer. After the materials set, 1.5-mm thick sections were obtained from the apexes. The presence of gaps and the bond between cement and dentin were analyzed using low-vacuum scanning electron microscopy. Push-out bond strength was measured using a universal testing machine. Ultrasonic agitation increased the interfacial adaptation of the cements. The S26 US group showed a higher adaptation value than MTA ( p < 0.05). US improved the push-out bond strength for all the cements ( p < 0.05). The US of retrograde filling cements enhanced the bond to the dentin wall of the root-end filling materials tested.

Increasing Polymer Solar Cell Fill Factor by Trap-Filling with F4-TCNQ at Parts Per Thousand Concentration.

Science.gov (United States)

Yan, Han; Manion, Joseph G; Yuan, Mingjian; García de Arquer, F Pelayo; McKeown, George R; Beaupré, Serge; Leclerc, Mario; Sargent, Edward H; Seferos, Dwight S

2016-08-01

Intrinsic traps in organic semiconductors can be eliminated by trap-filling with F4-TCNQ. Photovoltaic tests show that devices with F4-TCNQ at parts per thousand concentration outperform control devices due to an improved fill factor. Further studies confirm the trap-filling pathway and demonstrate the general nature of this finding. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Filled aperture concepts for the Terrestrial Planet Finder

Science.gov (United States)

Ridgway, Stephen T.

2003-02-01

Filled aperture telescopes can deliver a real, high Strehl image which is well suited for discrimination of faint planets in the vicinity of bright stars and against an extended exo-zodiacal light. A filled aperture offers a rich variety of PSF control and diffraction suppression techniques. Filled apertures are under consideration for a wide spectral range, including visible and thermal-IR, each of which offers a significant selection of biomarker molecular bands. A filled aperture visible TPF may be simpler in several respects than a thermal-IR nuller. The required aperture size (or baseline) is much smaller, and no cryogenic systems are required. A filled aperture TPF would look and act like a normal telescope - vendors and users alike would be comfortable with its design and operation. Filled aperture telescopes pose significant challenges in production of large primary mirrors, and in very stringent wavefront requirements. Stability of the wavefront control, and hence of the PSF, is a major issue for filled aperture systems. Several groups have concluded that these and other issues can be resolved, and that filled aperture options are competitive for a TPF precursor and/or for the full TPF mission. Ball, Boeing-SVS and TRW have recently returned architecture reviews on filled aperture TPF concepts. In this paper, I will review some of the major considerations underlying these filled aperture concepts, and suggest key issues in a TPF Buyers Guide.

Increased dependence on slow filling for left ventricular diastolic filling in patients with coronary artery disease and a depressed systolic function

International Nuclear Information System (INIS)

Yamagishi, Takashi; Ozaki, Masaharu; Furutani, Yuhji; Yamamoto, Kouzo; Saeki, Atsushi; Satoh, Shinichi; Kusukawa, Reizo

1990-01-01

Contributions of rapid filling, slow filling and atrial systole to the left ventricular(LV) filling volume were analyzed with the use of radionuclide ventriculography at rest, both globally and regionally, in 34 patients with isolated disease of the left anterior descending coronary artery. The patients included 17 with a normal ejection fraction (EF≥50%; group 1) and 17 with a depressed EF (<50%; group 2), and the data were compared with those obtained from 13 normal subjects. A computer program subdivided the LV image into 4 regions, and time-activity curves were constructed globally and regionally by reverse-gating from the R wave. In both groups the contribution of rapid filling to the LV filling volume was decreased significantly in the affected septal and apical regions, and in the global left ventricle compared with that in normal subjects. In group 1, the contribution of atrial systole showed an increase in these affected regions and in the global left ventricle. In contrast, in group 2, the atrial contribution was not increased globally or regionally as much as was expected. However, the contribution of slow filling was either increased significantly or tended to increase in the affected regions and in the global left ventricle. There were negative correlations between the contribution of rapid filling and that of slow filling in the global left ventricle (r=-0.73, p<0.001) and in each of the septal, apical and lateral regions (r≥-0.60, p<0.001), which suggested that the contribution of slow filling as well as of atrial systole undergoes an increase as rapid filling is impaired. Thus, in patients with coronary artery disease, the left ventricle relies on slow filling as well as atrial systole to affect diastolic LV filling in the affected regions and in the global left ventricle in the presence of LV systolic dysfunction. (author)

Drugs Cleared Through The FDA's Expedited Review Offer Greater Gains Than Drugs Approved By Conventional Process.

Science.gov (United States)

Chambers, James D; Thorat, Teja; Wilkinson, Colby L; Neumann, Peter J

2017-08-01

We investigated whether drugs approved by the Food and Drug Administration (FDA) through expedited review have offered larger health gains, compared to drugs approved through conventional review processes. We identified published estimates of additional health gains (measured in quality-adjusted life-years, or QALYs) associated with drugs approved in the period 1999-2012 through expedited (seventy-six drugs) versus conventional (fifty-nine) review processes. We found that drugs in at least one expedited review program offered greater gains than drugs reviewed through conventional processes (0.182 versus 0.003 QALYs). We also found that, compared to drugs not included in the same program, greater gains were provided by drugs in the priority review (0.175 versus 0.007 QALYs), accelerated approval (0.370 versus 0.031 QALYs), and fast track (0.254 versus 0.014 QALYs) programs. Our analysis suggests that the FDA has prioritized drugs that offer the largest health gains. Project HOPE—The People-to-People Health Foundation, Inc.

Conceptualizing Telehealth in Nursing Practice: Advancing a Conceptual Model to Fill a Virtual Gap.

Science.gov (United States)

Nagel, Daniel A; Penner, Jamie L

2016-03-01

Increasingly nurses use various telehealth technologies to deliver health care services; however, there has been a lag in research and generation of empirical knowledge to support nursing practice in this expanding field. One challenge to generating knowledge is a gap in development of a comprehensive conceptual model or theoretical framework to illustrate relationships of concepts and phenomena inherent to adoption of a broad range of telehealth technologies to holistic nursing practice. A review of the literature revealed eight published conceptual models, theoretical frameworks, or similar entities applicable to nursing practice. Many of these models focus exclusively on use of telephones and four were generated from qualitative studies, but none comprehensively reflect complexities of bridging nursing process and elements of nursing practice into use of telehealth. The purpose of this article is to present a review of existing conceptual models and frameworks, discuss predominant themes and features of these models, and present a comprehensive conceptual model for telehealth nursing practice synthesized from this literature for consideration and further development. This conceptual model illustrates characteristics of, and relationships between, dimensions of telehealth practice to guide research and knowledge development in provision of holistic person-centered care delivery to individuals by nurses through telehealth technologies. © The Author(s) 2015.

Global change expedition : nutrient, chlorophyll-A and primary productivity data, NOAA ship Mt. Mitchell, 14 July-6 September 1988 (NODC Accession 9000186)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Chlorophyll data from NOAA's Global Change Expedition in July-September 1988 was submitted by Dr. D.W. Frazel of RSMAS (University of Miami). The expedition was...

Global change expedition : nutrient, chlorophyll-A and primary productivity data, NOAA ship Mt. Mitchell, 14 July-6 September 1988 (NODC Accession 9000187)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Nutrient data from NOAA'S Global Change Expedition in July-September 1988 was submitted by Dr. Dennis W. Frazel of RSMAS (University of Miami). The expedition was...

Safety Distances for hydrogen filling stations

Energy Technology Data Exchange (ETDEWEB)

Matthijsen, A. J. C. M.; Kooi, E. S.

2005-07-01

In the Netherlands there is a growing interest in using natural gas as a transport fuel. The most important drivers behind this development are formed by poor inner city air quality and the decision to close several LPG filling stations. Dwellings are not allowed within the safety distances of 45 or 110 meters from the tanker filling point of these LPG stations, depending on the capacity of the station. Another driver is global warming. We are carrying out a study on station supply, compression, storage and filling for natural gas stations, and a similar, simultaneous study on hydrogen as a followup to our risk analysis for the hydrogen filling station in Amsterdam. Here, three buses drive on hydrogen as part of the European CUTE project. Driving on natural gas is an important step in the transition to cars on hydrogen. This study was commissioned by the Dutch Ministry of Spatial Planning, Housing and the Environment to advise on external safety aspects of future hydrogen filling stations. According to Dutch law homes may not be built within an individual risk contour of 10-6 per year of a dangerous object, such as a plant with hazardous materials or a filling station. An individual risk contour of 10-6 is represented by a line around a dangerous object that connects locations with an individual risk level of 10-6 per year. An individual 'located' within this contour line has a chance of one per million per year or more to be killed as a result of an accident caused by this object. The longest distance between the object and such a contour is called a 'safety distance'. A study on safety distances is now in progress for different kinds of hydrogen filling stations (e. g. gaseous and liquid hydrogen) and for different capacities, such as big, medium and small stations. The focus is on different kinds of hydrogen production and the hydrogen supply of the filling station. To decide on the design and supply of the hydrogen station, we examined the

Gap Resolution

Energy Technology Data Exchange (ETDEWEB)

2017-04-25

Gap Resolution is a software package that was developed to improve Newbler genome assemblies by automating the closure of sequence gaps caused by repetitive regions in the DNA. This is done by performing the follow steps:1) Identify and distribute the data for each gap in sub-projects. 2) Assemble the data associated with each sub-project using a secondary assembler, such as Newbler or PGA. 3) Determine if any gaps are closed after reassembly, and either design fakes (consensus of closed gap) for those that closed or lab experiments for those that require additional data. The software requires as input a genome assembly produce by the Newbler assembler provided by Roche and 454 data containing paired-end reads.

Of Images, Archives, and Anonymity: Glacier Photographs from Louise Arner Boyd's East Greenland Expeditions, 1933, 1937, and 1938

Science.gov (United States)

Nelson, F. E.; Peschel, S. M.; Hall, D. K.

2010-12-01

Louise A. Boyd (1887-1972) was raised to wealth and privilege in San Raphael, CA. Her inherited fortune allowed unlimited travel, and in 1924 she arrived in Spitsbergen as a tourist. Infatuated by Arctic landscapes, Boyd resolved to return north in a more assertive role and ran three "preliminary" expeditions to Greenland, in 1926, 1928, and 1931. Boyd’s expeditions to East Greenland in 1933, 1937, and 1938 were predictive of the type of campaign that after WWII would characterize government-sponsored and international scientific efforts. “Planned as a unit,” these campaigns, sponsored by the American Geographical Society (AGS), were thoroughly integrated scientific expeditions incorporating glaciology, periglacial and glacial geomorphology, bedrock geology, botany, hydrography, topographic surveys, tides and currents, and magnetic observations within representative areas. The goal of the expeditions was to provide comprehensive characterization of the physical environment. The volumes resulting from this work contain many large-scale hydrographic and topographic maps, photomosaics, glacier maps, and chapters on the geology, glacial history, botany, and hydrology of the region. Boyd received extensive publicity for her Arctic expeditions, although much of it was concerned with the novelty of expeditions to remote locations being led by a woman. Boyd’s expeditions employed scientists who eventually became highly influential in their respective fields. Boyd employed, among others, the earth scientists J.H. Bretz, R.F. Flint, and A.L. Washburn. Other important personnel on these expeditions included AGS cartographer/surveyor O.M. Miller and his assistant, W.A. Wood, who employed novel ground-based photogrammetric techniques to construct a series of glacier maps at scales as large as 1:5000. The maps featured detailed error analyses, and are probably the first large-scale maps of known accuracy to be made of the Greenland Ice Sheet’s outlet glaciers. Boyd�

Development of gap measurement technique in-vessel corium retention using ultrasonic pulse echo method

International Nuclear Information System (INIS)

Koo, Kil Mo; Kim, Jong Hwan; Kang, Kyung Ho; Kim, Sang Baik; Sim, Cheul Muu

1999-03-01

A gap between a molten material and a lower vessel is formed in the LAVA experiment, a phase 1 study of Sonata-IV program. In this technical report, quantitative results of the gap measurement using an off-line ultrasonic pulse echo method are presented. This report aims at development of an appropriate ultrasonics test method, by analyzing the problems from the external environmental reason and the internal characteristic reason. The signal analyzing methods to improve the S/N ratio in these problems are divided into the time variant synthesized signal analyzing method and the time invariant synthesized signal analyzing method. In this report, the possibility of the application of these two methods to the gap signal and the noise is considered. In this test, the signal of the propagational direction and reflectional direction through solid-liquid-solid specimen was analyzed to understand the behavior of the reflectional signal in a multi-layered structure by filling the gap with water between the melt and the lower head vessel. The quantitative gap measurement using the off-line ultrasonic pulse echo method was available for a little of the scanned region. But furtherly using DSP technique and imaging technique, the better results will be obtained. Some of the measured signals are presented as 2-dimensional spherical mapping method using distance and amplitude. Other signals difficult in quantitative measurement are saved for a new signal processing method. (author). 11 refs., 4 tabs., 54 figs

IODP Expeditions 303 and 306 Monitor Miocene- Quaternary Climate in the North Atlantic

Directory of Open Access Journals (Sweden)

Carlos Alvarez-Zarikian

2006-03-01

Full Text Available Introduction The IODP Expeditions 303 and 306 drilling sites were chosen for two reasons: (1 to capture Miocene-Quaternary millennial-scale climate variability in sensitive regions at the mouth of the Labrador Sea and in the North Atlantic icerafted debris (IRD belt (Ruddiman et al., 1977, and (2 to provide the sedimentary and paleomagnetic attributes, including adequate sedimentation rates, for constructinghigh-resolution isotopic and magnetic stratigraphies.High accumulation rates, reaching 20 cm ky-1, permit the study of millennial-scale variations in climate and in the Earth's magnetic fi eld over the past several million years, when the amplitude and frequency of climate variability changed substantially. Shipboard logging and scanning data (magnetic susceptibility and remanence, density, natural gamma radiation, digital images and color refl ectance and post-expedition x-ray fl uorescence (XRF scanning datahave revealed that the sediment cores recovered on Expeditions 303 and 306 contain detailed histories of millennial-scale climate and geomagnetic fi eld variability throughout the late Miocene to Quaternary epochs. The climate proxies will be integrated with paleomagnetic data to place the records of millennial-scale climate change into a high resolution stratigraphy based on oxygen isotope andrelative paleomagnetic intensity (RPI. The paleomagnetic record of polarity reversals, excursions and RPI in these cores is central to the construction of the stratigraphic template and will provide detailed documentation of geomagnetic fi eld behavior.

Effects of selective attention on perceptual filling-in.

Science.gov (United States)

De Weerd, P; Smith, E; Greenberg, P

2006-03-01

After few seconds, a figure steadily presented in peripheral vision becomes perceptually filled-in by its background, as if it "disappeared". We report that directing attention to the color, shape, or location of a figure increased the probability of perceiving filling-in compared to unattended figures, without modifying the time required for filling-in. This effect could be augmented by boosting attention. Furthermore, the frequency distribution of filling-in response times for attended figures could be predicted by multiplying the frequencies of response times for unattended figures with a constant. We propose that, after failure of figure-ground segregation, the neural interpolation processes that produce perceptual filling-in are enhanced in attended figure regions. As filling-in processes are involved in surface perception, the present study demonstrates that even very early visual processes are subject to modulation by cognitive factors.

Group dynamics in a long-term blind endeavor on Earth: An analog for space missions (Lewis & Clark Expedition group dynamic analysis)

Science.gov (United States)

Allner, M.; Rygalov, V.

2008-12-01

In 1803, President Thomas Jefferson set fourth a military expedition led by Captains M. Lewis and W. Clark (Lewis and Clark Expedition) on an exploration that would become an everlasting part of US national history and pride. Looking back at the events of this exploration, there are many similarities to the experiences future human space explorers will face as we look to colonize the Moon and travel to Mars and beyond (NASA Vision for Space Exploration, 2004): The Lewis and Clark Expedition lasted almost three years and involved a crew of 43 men traveling up the Missouri River to explore the unknown lands and a possible water route to the Pacific Ocean; The Expedition took place far away from customary comfortable environments known to European settlers in the early 18th century; The Expedition involved a remotely confined high-perceived risk environment with high levels of uncertainty providing stresses and every day challenges for the crew; Supplies brought on the mission were limited (mainly a mass/weight issue rather than cost), therefore the discovery and use of environmental resources (In-Situ Resource Utilization approach, including info-resources to mitigate uncertainty) was necessary for crew survival. The environments astronauts will encounter in space and on the Moon and Mars due to high risk and uncertainty will be in many aspects similar to what Lewis and Clark's crew experienced, as environments will be hostile and unforgiving if problems arise and aren't resolved quickly. The analysis provided in this research paper is relevant because the Lewis and Clark Expedition needed to move extensively and with minimal supplies. Polar remote settings, which were analyzed extensively, were different from this expedition due to the fact that these missions did not encompass extensive movement of crew facilities and supplies and were more like space missions orbiting the Earth. Using past space station results of performance on orbit in correlation with a

Development of Multidimensional Gap Conductance model using Virtual Link Gap Element

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyo Chan; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

The gap conductance that determines temperature gradient between pellet and cladding can be quite sensitive to gap thickness. For instance, once the gap size increases up to several micrometers in certain region, difference of pellet surface temperatures increases up to 100 Kelvin. Therefore, iterative thermo-mechanical coupled analysis is required to solve temperature distribution throughout pellet and cladding. Recently, multidimensional fuel performance codes have been being developed in the advanced countries to evaluate thermal behavior of fuel for off normal conditions and DBA(design based accident) conditions using the Finite Element Method (FEM). FRAPCON-FRAPTRAN code system, which is well known as the verified and reliable code, incorporates 1D thermal module and multidimensional mechanical module. In this code, multidimensional gap conductance model is not applied. ALCYONE developed by CEA introduces equivalent heat convection coefficient that represents multidimensional gap conductance as a function of gap thickness. BISON, which is multidimensional fuel performance code developed by INL, owns multidimensional gap conductance model using projected thermal contact. In general, thermal contact algorithm is nonlinear calculation which is expensive approach numerically. The gap conductance model for multi-dimension is difficult issue in terms of convergence and nonlinearity because gap conductance is function of gap thickness which depends on mechanical analysis at each iteration step. In this paper, virtual link gap (VLG) element has been proposed to resolve convergence issue and nonlinear characteristic of multidimensional gap conductance. In terms of calculation accuracy and convergence efficiency, the proposed VLG model was evaluated. LWR fuel performance codes should incorporate thermo-mechanical loop to solve gap conductance problem, iteratively. However, gap conductance in multidimensional model is difficult issue owing to its nonlinearity and

Geologic implications of gas hydrates in the offshore of India: results of the National Gas Hydrate Program Expedition 01

Science.gov (United States)

Collett, Timothy S.; Boswell, Ray; Cochran, J.R.; Kumar, Pushpendra; Lall, Malcolm; Mazumdar, Aninda; Ramana, Mangipudi Venkata; Ramprasad, Tammisetti; Riedel, Michael; Sain, Kalachand; Sathe, Arun Vasant; Vishwanath, Krishna

2014-01-01

The Indian National Gas Hydrate Program Expedition 01 (NGHP-01) is designed to study the occurrence of gas hydrate along the passive continental margin of the Indian Peninsula and in the Andaman convergent margin, with special emphasis on understanding the geologic and geochemical controls on the occurrence of gas hydrate in these two diverse settings. The NGHP-01 expedition established the presence of gas hydrates in the Krishna-Godavari and Mahanadi Basins, and the Andaman Sea. The expedition discovered in the Krishna-Godavari Basin one of the thickest gas hydrate accumulations ever documented, in the Andaman Sea one of the thickest and deepest gas hydrate stability zones in the world, and established the existence of a fully developed gas hydrate petroleum system in all three basins.

The Australasian Antarctic Expedition 2013-2014: Practicing 'Citizen-Science' in a Changing World

Science.gov (United States)

Fogwill, C. J.; Turney, C. S.

2014-12-01

Government funding is the cornerstone of modern science. But with declining investment in science across most of the Western World, a major challenge for society is where best to place what little resource we have. Which research questions should have the greatest priority? Nowhere are these issues more pressing than in the Antarctic, where bases have and continue to play host to 'big-science', multi-year programmes of research, locking up logistical support and costs. But in a warming world, the areas with the greatest effects of climate change aren't always near government research stations. With this in mind, in 2012 a plan was formed to visit Commonwealth Bay, a remote area off the East Antarctic Ice Sheet, where in 2010, an iceberg the size of Rhode Island, known as B09B, dramatically knocked a 60-mile long tongue of ice off the Mertz Glacier into the Southern Ocean, setting off a cascade of change. Inspired by the expeditions of the past, we advertised berths for sale to take citizen scientists south with us, harnessing their interest, experience and investment. People responded far and wide. We were oversubscribed, and the Australasian Antarctic Expedition 2013-2014 was born. With the Russian-owned MV Akademik Shokalskiy as the expedition vessel, we set out south from the New Zealand port of Bluff in late November 2013. During our journey south and on the ice we undertook a number of scientific firsts for the region actively engaging the volunteer scientists on board in projects ranging from oceanography, biology, ecology, geology and glaciaology. The expedition demostrated how private funding could support targeted programmes of research and communicate it to the wider world. Small-science research can capture the public's imagination and also reap real scientific outputs. Although it is a funding model developed in the Antarctic a hundred years ago, the beauty is it can applied anywhere in the world.

Professional organisation profile: a sub-Faculty of expedition medicine for Australasia.

Science.gov (United States)

Leggat, Peter A; Shaw, Marc T M

2010-05-01

A review of the recent foundation by The Australasian College of Tropical Medicine of the Sub-Faculty of Expedition Medicine is presented. Information is given on aims, professional grades of membership, and the various activities of the Sub-Faculty, including publications and scientific meetings. Copyright 2010 Elsevier Ltd. All rights reserved.

Spatial consequences of bridging the saccadic gap

DEFF Research Database (Denmark)

Yarrow, Kielan; Whiteley, Louise Emma; Rothwell, John C

2006-01-01

with the post-saccadic image. We first demonstrate that this illusion holds for moving objects, implying that the perception of time, velocity, and distance traveled become discrepant. We then show that this discrepancy is partially resolved up to 500 ms after a saccade: the perceived offset position of a post......We report six experiments suggesting that conscious perception is actively redrafted to take account of events both before and after the event that is reported. When observers saccade to a stationary object they overestimate its duration, as if the brain were filling in the saccadic gap......-saccadic moving stimulus shows a greater forward mislocalization when pursued after a saccade than during pursuit alone. These data are consistent with the idea that the temporal bias is resolved by the subsequent spatial adjustment to provide a percept that is coherent in its gist but inconsistent in its detail....

Quality Assurance Plan, N springs expedited response action

International Nuclear Information System (INIS)

Jackson, G.J.

1994-01-01

This document is the Quality Assurance Plan (QAP) to be followed during the definitive design, construction, and operational phases for activities associated with the N Springs Expedited Response Action (ERA) for the 100-NR-2 Operable Unit (OU). Westinghouse Hanford Company (WHC) will comply with the US Department of Energy (DOE) Order 5700.6C, Quality Assurance (DOE 1989), and the US Environmental Protection Agency (EPA), EPA/530-SW-86-031, Technical Guidance Document: Construction Quality Assurance for Hazardous Waste Land Disposal Facilities (EPA 1986)

Coordinating plug-in electric vehicle charging with electric grid: Valley filling and target load following

Science.gov (United States)

Zhang, Li; Jabbari, Faryar; Brown, Tim; Samuelsen, Scott

2014-12-01

Plug-in electric vehicles (PEVs) shift energy consumption from petroleum to electricity for the personal transportation sector. This work proposes a decentralized charging protocol for PEVs with grid operators updating the cost signal. Each PEV calculates its own optimal charging profile only once based on the cost signal, after it is plugged in, and sends the result back to the grid operators. Grid operators only need to aggregate charging profiles and update the load and cost. The existing PEV characteristics, national household travel survey (NHTS), California Independent System Operator (CAISO) demand, and estimates for future renewable generation in California are used to simulate PEV operation, PEV charging profiles, grid demand, and grid net load (demand minus renewable). Results show the proposed protocol has good performance for overnight net load valley filling if the costs to be minimized are proportional to the net load. Annual results are shown in terms of overnight load variation and comparisons are made with grid level valley filling results. Further, a target load can be approached in the same manner by using the gap between current load and the target load as the cost. The communication effort involved is quite modest.

Reviewing innovative Earth observation solutions for filling science-policy gaps in hydrology

Science.gov (United States)

Lehmann, Anthony; Giuliani, Gregory; Ray, Nicolas; Rahman, Kazi; Abbaspour, Karim C.; Nativi, Stefano; Craglia, Massimo; Cripe, Douglas; Quevauviller, Philippe; Beniston, Martin

2014-10-01

Improved data sharing is needed for hydrological modeling and water management that require better integration of data, information and models. Technological advances in Earth observation and Web technologies have allowed the development of Spatial Data Infrastructures (SDIs) for improved data sharing at various scales. International initiatives catalyze data sharing by promoting interoperability standards to maximize the use of data and by supporting easy access to and utilization of geospatial data. A series of recent European projects are contributing to the promotion of innovative Earth observation solutions and the uptake of scientific outcomes in policy. Several success stories involving different hydrologists' communities can be reported around the World. Gaps still exist in hydrological, agricultural, meteorological and climatological data access because of various issues. While many sources of data exists at all scales it remains difficult and time-consuming to assemble hydrological information for most projects. Furthermore, data and sharing formats remain very heterogeneous. Improvements require implementing/endorsing some commonly agreed standards and documenting data with adequate metadata. The brokering approach allows binding heterogeneous resources published by different data providers and adapting them to tools and interfaces commonly used by consumers of these resources. The challenge is to provide decision-makers with reliable information, based on integrated data and tools derived from both Earth observations and scientific models. Successful SDIs rely therefore on various aspects: a shared vision between all participants, necessity to solve a common problem, adequate data policies, incentives, and sufficient resources. New data streams from remote sensing or crowd sourcing are also producing valuable information to improve our understanding of the water cycle, while field sensors are developing rapidly and becoming less costly. More recent data

Molar apicectomy with amalgam root-end filling: results of a prospective study in two district general hospitals.

Science.gov (United States)

Wesson, C M; Gale, T M

2003-12-20

To determine the five-year success rates, site or sites of failure, prognostic indicators and lower lip morbidity associated with molar apicectomy using amalgam root-end filling. Multicentre, prospective study. The departments of oral and maxillo-facial surgery in two district general hospitals. One thousand and seven molar apicectomy procedures, combined with amalgam root-end filling were expedited during the period 1974-1995. A five-year review of each operated tooth was carried out or attempted between 1979-2000. Of the 790 (78%) operated molars successfully reviewed at 5 years or later 451 (57%) exhibited 'complete healing' and 39 (5%) 'uncertain healing'. Three hundred (38%) were classified as 'unsatisfactory healing' (failures), and these included 12 which were assumed to be of periodontal origin. Whilst longitudinal root fracture, perforation and/or infection in the furcation, periodontal disease or a non-restorable crown accounted for treatment failure and often the need to remove teeth subsequently, the study probably pointed to the apical ends of the roots rather than the furcation as being the major sites at which 'unsatisfactory healing' occurred. Mandibular first molars attracted the highest 'complete healing' rate (60%) and mandibular second molars the lowest (46%). 'Good' root canal treatment (RCT) at the outset improved the prognosis of a root-end filling (REF) whilst the absence of RCT compromised it. Cystic change pointed to a better prognosis than apical granulomatous change as did a deep compared with a shallow 'bone cuff'. Disease at the furcation suggested a worse prognosis. Teeth which showed 'complete healing' at 1 year had a 75% probability of maintaining this outcome at 5 years. Sensory disturbance of variable duration occurred in the lower lip following 20-21% of mandibular molar procedures. In the majority of cases (79-80%) this had remitted within 3 months. A permanent deficit occurred in 8 patients (1%) where the apicectomy could

Simultaneous in vivo comparison of water-filled and air-filled pressure measurement catheters: Implications for good urodynamic practice.

Science.gov (United States)

Gammie, A; Abrams, P; Bevan, W; Ellis-Jones, J; Gray, J; Hassine, A; Williams, J; Hashim, H

2016-11-01

This study aimed to evaluate whether the pressure readings obtained from air-filled catheters (AFCs) are the same as the readings from simultaneously inserted water-filled catheters (WFCs). It also aimed to make any possible recommendations for the use of AFCs to conform to International Continence Society (ICS) Good Urodynamic Practices (GUP). Female patients undergoing urodynamic studies in a single center had water-filled and air-filled catheters simultaneously measuring abdominal and intravesical pressure during filling with saline and during voiding. The pressures recorded by each system at each event during the test were compared using paired t-test and Bland-Altman analyses. 62 patients were recruited, of whom 51 had pressures that could be compared during filling, and 23 during voiding. On average, the pressures measured by the two systems were not significantly different during filling and at maximum flow, but the values for a given patient were found to differ by up to 10 cmH 2 O. This study shows that AFCs and WFCs cannot be assumed to register equal values of pressure. It has further shown that even when the p det readings are compared with their value at the start of a test, a divergence of values of up to 10 cmH 2 O remains. If AFCs are used, care must be taken to compensate for any p det variations that occur during patient movement. Before AFCs are adopted, new normal values for resting pressures need to be developed to allow good quality AFC pressure readings to be made. Neurourol. Urodynam. 35:926-933, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Quality of root fillings performed with two root filling techniques. An in vitro study using micro-CT

DEFF Research Database (Denmark)

Møller, L; Wenzel, A; Wegge-Larsen, AM

2013-01-01

-section images from Micro-computed Tomography scans. Results. All root canal fillings had voids. Permutation test showed no statistically significant difference between the two root filling techniques in relation to presence of voids (p = 0.092). A statistically significant difference in obturation time between...

Coffee and qat on the Royal Danish expedition to Arabia – botanical, ethnobotanical and commercial observations made in Yemen 1762-1763

DEFF Research Database (Denmark)

Friis, Ib

2015-01-01

requested observations on the use of coffee, but otherwise Forsskål and Niebuhr’s studies of coffee and qat were made entirely on their own initiative. Now, 250 years after The Royal Danish expedition to Arabia, coffee has become one of the world’s most valuable trade commodities and qat has become a widely......In spite of widespread consumption of coffee in Europe at the time of the Royal Danish expedition to Arabia 1761-1767, little was known of the cultivation of coffee in Yemen and of the Arabian coffee export to Europe. Fresh leaves of qat were used as a stimulant on the Arabian Peninsula and in East...... Africa, but before the Royal Danish expedition to Arabia this plant was known in Europe only from secondary reports. Two members of the expedition, Carsten Niebuhr and Peter Forsskål, pioneered studies of coffee and qat in Yemen and of the Arabian coffee export. Linnaeus’ instructions for travellers...

Expedited technology demonstration project. Project baseline revision 2.2 and FY96 plan

International Nuclear Information System (INIS)

1996-07-01

The Expedited Technology Demonstration Project Plan, Mixed Waste Management Facility (MWMF) current baseline. The revised plan will focus efforts specifically on the demonstration of an integrated Molten Salt Oxidation (MSO) system. In addition to the MSO primary unit, offgas, and salt recycle subsystems, the demonstrations will include feed preparation and feed delivery systems, and the generation of robust final forms from process mineral residues. A simplified process flow chart for the expedited demonstration is provided. To minimize costs and to accelerate the schedule for deployment, the integrated system will be staged in an existing facility at LLNL equipped to handle hazardous and radioactive materials. The MSO systems will be activated in fiscal year 97, followed by the activation of feed preparation and final forms in fiscal year 98

Filling the Data Gaps in Mountain Climate Observatories Through Advanced Technology, Refined Instrument Siting, and a Focus on Gradients

Directory of Open Access Journals (Sweden)

Scotty Strachan

2016-11-01

Full Text Available The mountain research community is still contending with the need to monitor ecosystems, both to improve local management practices and to address regional and global science questions related to the Future Earth themes of Dynamic Planet, Global Sustainable Development, and Transformations Towards Sustainability. How such efforts may be designed and coordinated remains an open question. Historical climate and ecological observatories and networks typically have not represented the scope or spatial and topographic distribution of near-surface processes in mountains, creating knowledge gaps. Grassroots, in situ investigations have revealed the existence of topoclimates that are not linearly related to general atmospheric conditions, and are also not adequately represented in gridded model products. In this paper, we describe how some of the disconnects between data, models, and applications in mountains can be addressed using a combination of gradient monitoring, uniform observational siting and standards, and modern technology (cyberinfrastructure. Existing observational studies need to expand their topographic niches, and future observatories should be planned to span entire gradients. Use of cyberinfrastructure tools such as digital telemetry and Internet Protocol networks can reduce costs and data gaps while improving data quality control processes and widening audience outreach. Embracing this approach and working toward common sets of comparable measurements should be goals of emerging mountain observatories worldwide.

Selective filling of Photonic Crystal Fibres

DEFF Research Database (Denmark)

Nielsen, Kristian; Noordegraaf, Danny; Sørensen, Thorkild

2005-01-01

A model for calculating the time necessary for filling one or more specific holes in a photonic crystal fibre is made. This model is verified for water, and its enabling potential is illustrated by a polymer application. Selective filling of the core in an air-guide photonic crystal fibre...

The ultrasonic wave pattern analysis and the frequency diversity signal processing in multi-layered gap measurement for in-vessel corium retention

International Nuclear Information System (INIS)

Koo, K. M.; Kim, J. H.; Kim, S. B.; Kim, H. D.

1999-01-01

A gap between a molten material and a lower head vessel is formed in the LAVA experiment, a phase 1 study of SONATA-IV program. In this paper, the quantitative results of the gap measurement using an off-line ultrasonic pulse echo method by frequency diversity signal processing are presented. However, the gap measurement signal using an ordinary ultrasonic test would be lack of reliability due to the structural complexity of the specimen. The structural complexity may result from the external reason from the shape and the internal reason from the material characteristics. This paper aims at the development of an appropriate ultrasonic test method, by analyzing the problems from the internal characteristic reason. In this test, the signal of the propagational direction and reflectional direction through solid-liquid-solid specimen was analyzed to understand the behavior of the reflectional signal in a multi-layered structure by filling the gap with water between the melt and the lower head vessel

A novel adaptive discrete cosine transform-domain filter for gap-inpainting of high resolution PET scanners

International Nuclear Information System (INIS)

Shih, Cheng-Ting; Lin, Hsin-Hon; Chuang, Keh-Shih; Wu, Jay; Chang, Shu-Jun

2014-01-01

Purpose: Several positron emission tomography (PET) scanners with special detector block arrangements have been developed in recent years to improve the resolution of PET images. However, the discontinuous detector blocks cause gaps in the sinogram. This study proposes an adaptive discrete cosine transform-based (aDCT) filter for gap-inpainting. Methods: The gap-corrupted sinogram was morphologically closed and subsequently converted to the DCT domain. A certain number of the largest coefficients in the DCT spectrum were identified to determine the low-frequency preservation region. The weighting factors for the remaining coefficients were determined by an exponential weighting function. The aDCT filter was constructed and applied to two digital phantoms and a simulated phantom introduced with various levels of noise. Results: For the Shepp-Logan head phantom, the aDCT filter filled the gaps effectively. For the Jaszczak phantom, no secondary artifacts were induced after aDCT filtering. The percent mean square error and mean structure similarity of the aDCT filter were superior to those of the DCT2 filter at all noise levels. For the simulated striatal dopamine innervation study, the aDCT filter recovered the shape of the striatum and restored the striatum to reference activity ratios to the ideal value. Conclusions: The proposed aDCT filter can recover the missing gap data in the sinogram and improve the image quality and quantitative accuracy of PET images

A novel adaptive discrete cosine transform-domain filter for gap-inpainting of high resolution PET scanners

Energy Technology Data Exchange (ETDEWEB)

Shih, Cheng-Ting; Lin, Hsin-Hon; Chuang, Keh-Shih [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Wu, Jay, E-mail: jwu@mail.cmu.edu.tw [Department of Biomedical Imaging and Radiological Science, China Medical University, Taichung 40402, Taiwan (China); Chang, Shu-Jun [Health Physics Division, Institute of Nuclear Energy Research, Atomic Energy Council, Taoyuan 32546, Taiwan (China)

2014-08-15

Purpose: Several positron emission tomography (PET) scanners with special detector block arrangements have been developed in recent years to improve the resolution of PET images. However, the discontinuous detector blocks cause gaps in the sinogram. This study proposes an adaptive discrete cosine transform-based (aDCT) filter for gap-inpainting. Methods: The gap-corrupted sinogram was morphologically closed and subsequently converted to the DCT domain. A certain number of the largest coefficients in the DCT spectrum were identified to determine the low-frequency preservation region. The weighting factors for the remaining coefficients were determined by an exponential weighting function. The aDCT filter was constructed and applied to two digital phantoms and a simulated phantom introduced with various levels of noise. Results: For the Shepp-Logan head phantom, the aDCT filter filled the gaps effectively. For the Jaszczak phantom, no secondary artifacts were induced after aDCT filtering. The percent mean square error and mean structure similarity of the aDCT filter were superior to those of the DCT2 filter at all noise levels. For the simulated striatal dopamine innervation study, the aDCT filter recovered the shape of the striatum and restored the striatum to reference activity ratios to the ideal value. Conclusions: The proposed aDCT filter can recover the missing gap data in the sinogram and improve the image quality and quantitative accuracy of PET images.

[Cermet cements for milk tooth fillings. Preliminary results].

Science.gov (United States)

Hickel, R; Petschelt, A; Voss, A

1989-06-01

106 Ketac-Silver fillings in deciduous molars were reevaluated after 1 to 3.3 years, i.e. 25 month on the average. About 90% of 50 occlusal fillings and about 84% of 56 multisurface restorations were unchanged. Without claiming statistical evidence for their conclusiveness, we consider these results as an indication that cermet cements are a useful alternative to amalgam fillings in deciduous teeth, particularly since the life of these fillings is limited to the time until the milk tooth is physiologically lost.

Spatio-temporal gap analysis of OBIS-SEAMAP project data: assessment and way forward.

Directory of Open Access Journals (Sweden)

Connie Y Kot

Full Text Available The OBIS-SEAMAP project has acquired and served high-quality marine mammal, seabird, and sea turtle data to the public since its inception in 2002. As data accumulated, spatial and temporal biases resulted and a comprehensive gap analysis was needed in order to assess coverage to direct data acquisition for the OBIS-SEAMAP project and for taxa researchers should true gaps in knowledge exist. All datasets published on OBIS-SEAMAP up to February 2009 were summarized spatially and temporally. Seabirds comprised the greatest number of records, compared to the other two taxa, and most records were from shipboard surveys, compared to the other three platforms. Many of the point observations and polyline tracklines were located in northern and central Atlantic and the northeastern and central-eastern Pacific. The Southern Hemisphere generally had the lowest representation of data, with the least number of records in the southern Atlantic and western Pacific regions. Temporally, records of observations for all taxa were the lowest in fall although the number of animals sighted was lowest in the winter. Oceanographic coverage of observations varied by platform for each taxa, which showed that using two or more platforms represented habitat ranges better than using only one alone. Accessible and published datasets not already incorporated do exist within spatial and temporal gaps identified. Other related open-source data portals also contain data that fill gaps, emphasizing the importance of dedicated data exchange. Temporal and spatial gaps were mostly a result of data acquisition effort, development of regional partnerships and collaborations, and ease of field data collection. Future directions should include fostering partnerships with researchers in the Southern Hemisphere while targeting datasets containing species with limited representation. These results can facilitate prioritizing datasets needed to be represented and for planning research for

Gas-Filled Capillary Model

International Nuclear Information System (INIS)

Steinhauer, L. C.; Kimura, W. D.

2006-01-01

We have developed a 1-D, quasi-steady-state numerical model for a gas-filled capillary discharge that is designed to aid in selecting the optimum capillary radius in order to guide a laser beam with the required intensity through the capillary. The model also includes the option for an external solenoid B-field around the capillary, which increases the depth of the parabolic density channel in the capillary, thereby allowing for propagation of smaller laser beam waists. The model has been used to select the parameters for gas-filled capillaries to be utilized during the Staged Electron Laser Acceleration -- Laser Wakefield (STELLA-LW) experiment

Initial settlements of rock fills on soft clay

OpenAIRE

Pedersen, Truls Martens

2012-01-01

Rock fills that hit the seabed will remold the underlying material. If this material is a clay with sufficiently low shear strength, it will adopt rheological properties, causing flow through the rock fill, and contributing to the initial settlements of the rock fill in addition to conventional consolidation theory. The settlements of the rocks depend upon the height of the rock fill and how the rocks have been laid out. This is due to the viscosity of the clay, and the fact that clay is thix...

To Fill or Not to Fill: Sensitivity Analysis of the Influence of Resolution and Hole Filling on Point Cloud Surface Modeling and Individual Rockfall Event Detection

Directory of Open Access Journals (Sweden)

Michael J. Olsen

2015-09-01

Full Text Available Monitoring unstable slopes with terrestrial laser scanning (TLS has been proven effective. However, end users still struggle immensely with the efficient processing, analysis, and interpretation of the massive and complex TLS datasets. Two recent advances described in this paper now improve the ability to work with TLS data acquired on steep slopes. The first is the improved processing of TLS data to model complex topography and fill holes. This processing step results in a continuous topographic surface model that seamlessly characterizes the rock and soil surface. The second is an advance in the automated interpretation of the surface model in such a way that a magnitude and frequency relationship of rockfall events can be quantified, which can be used to assess maintenance strategies and forecast costs. The approach is applied to unstable highway slopes in the state of Alaska, U.S.A. to evaluate its effectiveness. Further, the influence of the selected model resolution and degree of hole filling on the derived slope metrics were analyzed. In general, model resolution plays a pivotal role in the ability to detect smaller rockfall events when developing magnitude-frequency relationships. The total volume estimates are also influenced by model resolution, but were comparatively less sensitive. In contrast, hole filling had a noticeable effect on magnitude-frequency relationships but to a lesser extent than modeling resolution. However, hole filling yielded a modest increase in overall volumetric quantity estimates. Optimal analysis results occur when appropriately balancing high modeling resolution with an appropriate level of hole filling.

21 CFR 872.3820 - Root canal filling resin.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Root canal filling resin. 872.3820 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3820 Root canal filling resin. (a) Identification. A root canal filling resin is a device composed of material, such as methylmethacrylate, intended...

7 CFR 58.730 - Filling containers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Filling containers. 58.730 Section 58.730 Agriculture... Procedures § 58.730 Filling containers. Hot fluid cheese from the cookers may be held in hotwells or hoppers... shall effectively measure the desired amount of product into the pouch or container in a sanitary manner...

Modeling and Fault Simulation of Propellant Filling System

International Nuclear Information System (INIS)

Jiang Yunchun; Liu Weidong; Hou Xiaobo

2012-01-01

Propellant filling system is one of the key ground plants in launching site of rocket that use liquid propellant. There is an urgent demand for ensuring and improving its reliability and safety, and there is no doubt that Failure Mode Effect Analysis (FMEA) is a good approach to meet it. Driven by the request to get more fault information for FMEA, and because of the high expense of propellant filling, in this paper, the working process of the propellant filling system in fault condition was studied by simulating based on AMESim. Firstly, based on analyzing its structure and function, the filling system was modular decomposed, and the mathematic models of every module were given, based on which the whole filling system was modeled in AMESim. Secondly, a general method of fault injecting into dynamic system was proposed, and as an example, two typical faults - leakage and blockage - were injected into the model of filling system, based on which one can get two fault models in AMESim. After that, fault simulation was processed and the dynamic characteristics of several key parameters were analyzed under fault conditions. The results show that the model can simulate effectively the two faults, and can be used to provide guidance for the filling system maintain and amelioration.

33 CFR 183.564 - Fuel tank fill system.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Fuel tank fill system. 183.564...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.564 Fuel tank fill system. (a) Each fuel fill opening must be located so that a gasoline overflow of up to five...

Better building of valley fills

Energy Technology Data Exchange (ETDEWEB)

Chironis, N.P.

1980-03-01

Current US regulations for building valley fills or head of hollow fills to hold excess spoil resulting from contour mining are meeting with considerable opposition, particularly from operators in steep-slope areas. An alternative method has been submitted to the Office of Surface Mining by Virgina. Known as the zoned concept method, it has already been used successfully in building water-holding dams and coal refuse embankments on sloping terrain. The ways in which drainage and seepage are managed are described.

Radio resource management using geometric water-filling

CERN Document Server

He, Peter; Zhou, Sheng; Niu, Zhisheng

2014-01-01

This brief introduces the fundamental theory and development of managing radio resources using a water-filling algorithm that can optimize system performance in wireless communication. Geometric Water-Filling (GWF) is a crucial underlying tool in emerging communication systems such as multiple input multiple output systems, cognitive radio systems, and green communication systems. Early chapters introduce emerging wireless technologies and provide a detailed analysis of water-filling. The brief investigates single user and multi-user issues of radio resource management, allocation of resources

One-dimensional Gromov minimal filling problem

International Nuclear Information System (INIS)

Ivanov, Alexandr O; Tuzhilin, Alexey A

2012-01-01

The paper is devoted to a new branch in the theory of one-dimensional variational problems with branching extremals, the investigation of one-dimensional minimal fillings introduced by the authors. On the one hand, this problem is a one-dimensional version of a generalization of Gromov's minimal fillings problem to the case of stratified manifolds. On the other hand, this problem is interesting in itself and also can be considered as a generalization of another classical problem, the Steiner problem on the construction of a shortest network connecting a given set of terminals. Besides the statement of the problem, we discuss several properties of the minimal fillings and state several conjectures. Bibliography: 38 titles.

[Research progress of larger flexion gap than extension gap in total knee arthroplasty].

Science.gov (United States)

Zhang, Weisong; Hao, Dingjun

2017-05-01

To summarize the progress of larger flexion gap than extension gap in total knee arthro-plasty (TKA). The domestic and foreign related literature about larger flexion gap than extension gap in TKA, and its impact factors, biomechanical and kinematic features, and clinical results were summarized. During TKA, to adjust the relations of flexion gap and extension gap is one of the key factors of successful operation. The biomechanical, kinematic, and clinical researches show that properly larger flexion gap than extension gap can improve both the postoperative knee range of motion and the satisfaction of patients, but does not affect the stability of the knee joint. However, there are also contrary findings. So adjustment of flexion gap and extension gap during TKA is still in dispute. Larger flexion gap than extension gap in TKA is a new joint space theory, and long-term clinical efficacy, operation skills, and related complications still need further study.

Assessment of periapical health, quality of root canal filling, and ...

African Journals Online (AJOL)

Sixty three teeth were found to have short root canal fillings, whereas 74 teeth had adequate root canal fillings, and the remaining 10 teeth had over extended root canal filling. A significant correlation was observed between the length of root filling and apical periodontitis (P = 0,023). Inadequately dense root canal filling was ...

Electrical stimulation accelerates axonal and functional peripheral nerve regeneration across long gaps.

Science.gov (United States)

Haastert-Talini, Kirsten; Schmitte, Ruth; Korte, Nele; Klode, Dorothee; Ratzka, Andreas; Grothe, Claudia

2011-04-01

Short-term low-frequency electrical stimulation (ESTIM) of proximal peripheral nerve stumps prior to end-to-end coaptation or tubular bridging of small distances has been reported to increase preferential motor reinnervation and functional motor recovery in animal models and human patients undergoing carpal tunnel release surgery. We investigated the effects of ESTIM on regeneration across rat sciatic nerve gaps, which exceed distances that allow spontaneous regeneration. Three different reconstruction approaches were combined with ESTIM in the experimental groups. Nerve gaps (13 mm) were bridged using (I) nerve autotransplantation, (II) transplantation of differentially filled silicone tubes, or (III) transplantation of tubular grafts containing fibroblast growth factor-2 overexpressing Schwann cells (SCs) for gene therapy. The regeneration outcome was followed for up to 8 weeks, and functionally as well as histomorphometrically analyzed in comparison to non-stimulated control groups. Combining ESTIM with nerve autotransplantation significantly increased the nerve fiber density in the regenerated nerve, and the grade of functional recovery as detected by electrodiagnostic recordings from the gastrocnemius muscle. The combination of ESTIM with transplantation of naïve SCs increased the regeneration of gap-bridging nerve tissue. Although macroscopic tissue regeneration was not further improved after combining ESTIM with FGF-2(21/23-kD) gene therapy, the latter resulted in a high rate of regenerated nerves that functionally reconnected to the target muscle. Based on our results, brief ESTIM shows high potential to accelerate axonal as well as functional (motor and sensory) outcomes in the clinical setting of peripheral nerve gap reconstruction in human patients.

Gap Junctions

Science.gov (United States)

Nielsen, Morten Schak; Axelsen, Lene Nygaard; Sorgen, Paul L.; Verma, Vandana; Delmar, Mario; Holstein-Rathlou, Niels-Henrik

2013-01-01

Gap junctions are essential to the function of multicellular animals, which require a high degree of coordination between cells. In vertebrates, gap junctions comprise connexins and currently 21 connexins are known in humans. The functions of gap junctions are highly diverse and include exchange of metabolites and electrical signals between cells, as well as functions, which are apparently unrelated to intercellular communication. Given the diversity of gap junction physiology, regulation of gap junction activity is complex. The structure of the various connexins is known to some extent; and structural rearrangements and intramolecular interactions are important for regulation of channel function. Intercellular coupling is further regulated by the number and activity of channels present in gap junctional plaques. The number of connexins in cell-cell channels is regulated by controlling transcription, translation, trafficking, and degradation; and all of these processes are under strict control. Once in the membrane, channel activity is determined by the conductive properties of the connexin involved, which can be regulated by voltage and chemical gating, as well as a large number of posttranslational modifications. The aim of the present article is to review our current knowledge on the structure, regulation, function, and pharmacology of gap junctions. This will be supported by examples of how different connexins and their regulation act in concert to achieve appropriate physiological control, and how disturbances of connexin function can lead to disease. © 2012 American Physiological Society. Compr Physiol 2:1981-2035, 2012. PMID:23723031

Navigating Fragmented Ocean Law in the California Current: Tools to Identify and Measure Gaps and Overlaps for Ecosystem-Based Management

OpenAIRE

Ekstrom, Julia A.

2008-01-01

Fragmented ocean management contributes significantly to the declining health of the world’s oceans. The sector-based piecemeal approach to management has produced a governance system filled with gaps and overlaps. These inefficiencies impede effective mitigation and confrontation of major environmental stressors. Historically, industries such as mining, fishing, and shipping, have driven management decisions for ocean-related uses. Government agencies, scientists, and other natural resource ...

RESOLVING THE GAP AND AU-SCALE ASYMMETRIES IN THE PRE-TRANSITIONAL DISK OF V1247 ORIONIS

Energy Technology Data Exchange (ETDEWEB)

Kraus, Stefan; Espaillat, Catherine; Wilner, David J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, MS-78, Cambridge, MA 02138 (United States); Ireland, Michael J. [Department of Physics and Astronomy, Macquarie University, Sydney, NSW 2109 (Australia); Sitko, Michael L.; Swearingen, Jeremy R.; Werren, Chelsea [Department of Physics, University of Cincinnati, Cincinnati, OH 45221 (United States); Monnier, John D.; Calvet, Nuria [Department of Astronomy, University of Michigan, 918 Dennison Building, Ann Arbor, MI 48109 (United States); Grady, Carol A. [Eureka Scientific Inc., Oakland, CA 94602 (United States); Harries, Tim J. [School of Physics, University of Exeter, Stocker Road, Exeter EX4 4QL (United Kingdom); Hoenig, Sebastian F. [Department of Physics, University of California Santa Barbara, Broida Hall, Santa Barbara, CA 93106 (United States); Russell, Ray W. [The Aerospace Corporation, Los Angeles, CA 90009 (United States)

2013-05-01

Pre-transitional disks are protoplanetary disks with a gapped disk structure, potentially indicating the presence of young planets in these systems. In order to explore the structure of these objects and their gap-opening mechanism, we observed the pre-transitional disk V1247 Orionis using the Very Large Telescope Interferometer, the Keck Interferometer, Keck-II, Gemini South, and IRTF. This allows us to spatially resolve the AU-scale disk structure from near- to mid-infrared wavelengths (1.5-13 {mu}m), tracing material at different temperatures and over a wide range of stellocentric radii. Our observations reveal a narrow, optically thick inner-disk component (located at 0.18 AU from the star) that is separated from the optically thick outer disk (radii {approx}> 46 AU), providing unambiguous evidence for the existence of a gap in this pre-transitional disk. Surprisingly, we find that the gap region is filled with significant amounts of optically thin material with a carbon-dominated dust mineralogy. The presence of this optically thin gap material cannot be deduced solely from the spectral energy distribution, yet it is the dominant contributor at mid-infrared wavelengths. Furthermore, using Keck/NIRC2 aperture masking observations in the H, K', and L' bands, we detect asymmetries in the brightness distribution on scales of {approx}15-40 AU, i.e., within the gap region. The detected asymmetries are highly significant, yet their amplitude and direction changes with wavelength, which is not consistent with a companion interpretation but indicates an inhomogeneous distribution of the gap material. We interpret this as strong evidence for the presence of complex density structures, possibly reflecting the dynamical interaction of the disk material with sub-stellar mass bodies that are responsible for the gap clearing.

Space-Time Water-Filling for Composite MIMO Fading Channels

Directory of Open Access Journals (Sweden)

2006-01-01

Full Text Available We analyze the ergodic capacity and channel outage probability for a composite MIMO channel model, which includes both fast fading and shadowing effects. The ergodic capacity and exact channel outage probability with space-time water-filling can be evaluated through numerical integrations, which can be further simplified by using approximated empirical eigenvalue and maximal eigenvalue distribution of MIMO fading channels. We also compare the performance of space-time water-filling with spatial water-filling. For MIMO channels with small shadowing effects, spatial water-filling performs very close to space-time water-filling in terms of ergodic capacity. For MIMO channels with large shadowing effects, however, space-time water-filling achieves significantly higher capacity per antenna than spatial water-filling at low to moderate SNR regimes, but with a much higher channel outage probability. We show that the analytical capacity and outage probability results agree very well with those obtained from Monte Carlo simulations.

Striking balance between expedited review and expecting efficacious anticancer drug and biologics: An ongoing challenge

Directory of Open Access Journals (Sweden)

Krishnan Vengadaragava Chary

2017-01-01

Full Text Available Objective: The objective of this study is to assess the postmarketing status: Efficacy and safety drugs and biologics related with cancer approved under expedited review. Methods: This observational, analytical study was carried between January and April 2016 by the Department of Pharmacology and Medical Oncology, Saveetha Medical College. Drugs approved under expedited review, fast-track status and its association with anti-cancer effects, postmarketing efficacy and safety, propensity to induce the second tumor was noted. Drug approval status and average time of review process were obtained from the United States-Food and Drug Administration (FDA, Center for Drugs and Biologics Center (Center for Drug Evaluation and Research and Center for Biologics Evaluation and Research. Postmarketing adverse events and safety issues were collected FDA adverse effects reporting system. Further, evidence efficacy and safety of drugs were taken from various meta-analysis, reports on BioMed journals, and Cochrane systematic reviews. Results: In the last 5 years, 166 products were approved by expedited review. Out of 166, 48 (28.9% drugs/biologics are anticancer drugs and drugs used in precancerous conditions. The average time of review varies from19 months to 8.2 months. Out of these 48 molecules, 37 (77% molecules received serious adverse event alert. Positive correlation is seen between average time of review and number of adverse events reported. Seven (14.5% drugs were proven to induce second tumor among receivers. Conclusion: Although expedited review facilitates faster approval of drugs; selection and assessment criteria should be stringent to prevent clinical failure, serious adverse effects of such drugs exposed to many individuals. Focus should be given developing chemosensitizing molecule and evaluation of metronomic regimen which is being more optimistic in current cancer therapeutics.

Gas filled detectors

International Nuclear Information System (INIS)

Stephan, C.

1993-01-01

The main types of gas filled nuclear detectors: ionization chambers, proportional counters, parallel-plate avalanche counters (PPAC) and microstrip detectors are described. New devices are shown. A description of the processes involved in such detectors is also given. (K.A.) 123 refs.; 25 figs.; 3 tabs

Lectotype designations of new species of hydroids (Cnidaria, Hydrozoa), described by C.M. Fraser, from Allan Hancock Pacific and Caribbean Sea Expeditions

NARCIS (Netherlands)

Calder, D.R.; Vervoort, W.; Hochberg, F.G.

2009-01-01

Hydroids of the Allan Hancock Pacific Expeditions, and those of the Allan Hancock Caribbean Sea Expedition, were examined by Charles McLean Fraser in a series of reports published between 1938 and 1948. A total of 159 new nominal species was described from material collected in the eastern Pacific

The water-filled versus air-filled status of vessels cut open in air: the 'Scholander assumption' revisited

Science.gov (United States)

M.T. Tyree; H. Cochard; P. Cruziat

2003-01-01

When petioles of transpiring leaves are cut in the air, according to the 'Scholander assumption', the vessels cut open should fill with air as the water is drained away by continued transpiration, The distribution of air-filled vessels versus distance from the cut surface should match the distribution of lengths of 'open vessels', i.e. vessels cut...

Filling gaps in biodiversity knowledge for macrofungi: contributions and assessment of an herbarium collection DNA barcode sequencing project.

Science.gov (United States)

Osmundson, Todd W; Robert, Vincent A; Schoch, Conrad L; Baker, Lydia J; Smith, Amy; Robich, Giovanni; Mizzan, Luca; Garbelotto, Matteo M

2013-01-01

Despite recent advances spearheaded by molecular approaches and novel technologies, species description and DNA sequence information are significantly lagging for fungi compared to many other groups of organisms. Large scale sequencing of vouchered herbarium material can aid in closing this gap. Here, we describe an effort to obtain broad ITS sequence coverage of the approximately 6000 macrofungal-species-rich herbarium of the Museum of Natural History in Venice, Italy. Our goals were to investigate issues related to large sequencing projects, develop heuristic methods for assessing the overall performance of such a project, and evaluate the prospects of such efforts to reduce the current gap in fungal biodiversity knowledge. The effort generated 1107 sequences submitted to GenBank, including 416 previously unrepresented taxa and 398 sequences exhibiting a best BLAST match to an unidentified environmental sequence. Specimen age and taxon affected sequencing success, and subsequent work on failed specimens showed that an ITS1 mini-barcode greatly increased sequencing success without greatly reducing the discriminating power of the barcode. Similarity comparisons and nonmetric multidimensional scaling ordinations based on pairwise distance matrices proved to be useful heuristic tools for validating the overall accuracy of specimen identifications, flagging potential misidentifications, and identifying taxa in need of additional species-level revision. Comparison of within- and among-species nucleotide variation showed a strong increase in species discriminating power at 1-2% dissimilarity, and identified potential barcoding issues (same sequence for different species and vice-versa). All sequences are linked to a vouchered specimen, and results from this study have already prompted revisions of species-sequence assignments in several taxa.

Geomechanical investigations for the designing of cemented filling

Energy Technology Data Exchange (ETDEWEB)

Berry, P.

1980-05-15

Laboratory and in situ investigations have led to the identification of the main geomechanical parameters that condition the stability of the cemented fill in the Gavorrano pyrite mine (Tuscany, Italy); such parameters were used for working out a satisfactory mining method. The pyrite is mined with the descending horizontal slice method with integral cemented filling which is obtained by throwing a mixture of limestone aggregates and cement into the mined voids. The laboratory geomechanical investigations carried out on fill samples have pointed out that the physical and mechanical characteristics are highly variable and this is essentially due to the fact that the fill is cast into place by compressed air. In particular, it was pointed out that the strength depends upon the cement content and upon the porosity according to a power law. The in situ measurements of the convergence between the roof and the floor, and the load measurements pointed out the considerable importance of the horizontal and vertical joints that cross the fill mass and that are inevitably brought about by a discontinuity of the fill. The results of the study made it possible to adopt an acceptable geomechanical behaviour model of the fill. On the basis of this model the mining pattern was deeply modified, the width and the height of the slices were considerably enlarged and thus the output was improved.

Improving the support characteristics of hydraulic fill

Energy Technology Data Exchange (ETDEWEB)

Corson, D. R.; Dorman, K. R.; Sprute, R. H.

1980-05-15

Extensive laboratory and field testing has defined the physical properties of hydraulic fill. Effect of void ratio on percolation rate has been quantified, and tests were developed to estimate waterflow through fill material in a given state underground. Beneficial effect on fill's support capability through addition of cement alone or in conjunction with vibratory compaction has been investigated. Two separate field studies in operating cut-and-fill mines measured vein-wall deformation and loads imposed on backfilled stopes. Technology has been developed that will effectively and efficiently dewater and densify ultra-fine-grained slurries typical of metal mine hydraulic backfill. At least two operators are using this electrokinetic technique to dewater slimes collected in underground sumps or impoundments. This technique opens up the possibility of using the total unclassified tailings product as a hydraulic backfill. Theoretical enhancement of ground support and rock-burst control through improved support capability will be tested in a full-scale mine stope installation. Both a horizontal layer and a vertical column of high modulus fill will be placed in an attempt to reduce stope wall closure, support more ground pressure, and lessen rock-burst occurrence.

Use of Expedited Partner Therapy for Sexually Transmitted Diseases in College and University Health Centers in the United States, 2011-2012.

Science.gov (United States)

Cramer, Ryan; Martinez, Nina; Roberts, Craig; Habel, Melissa A; Leino, E Victor; Leichliter, Jami S

2015-10-01

We examined expedited partner therapy for chlamydia and gonorrhea in college and university health centers by institutional and policy characteristics. Expedited partner therapy awareness and use was low (44.1% used), did not differ by institutional characteristics, and differed by policy environment. Our findings suggest missed opportunities for sexually transmitted disease prevention in college and university health centers.

Airborne Arctic Stratospheric Expedition II: An overview

Science.gov (United States)

Anderson, James G.; Toon, Owen B.

1993-11-01

The sudden onset of ozone depletion in the antarctic vortex set a precedent for both the time scale and the severity of global change. The Airborne Antarctic Ozone Experiment (AAOE), staged from Punta Arenas, Chile, in 1987, established that CFCs, halons, and methyl bromide, the dominant sources of chlorine and bromine radicals in the stratosphere, control the rate of ozone destruction over the Antarctic; that the vortex is depleted in reactive nitrogen and water vapor; and that diabatic cooling during the Antarctic winter leads to subsidence within the vortex core, importing air from higher altitudes and lower latitudes. This last conclusion is based on observed dramatic distortion in the tracer fields, most notably N2O.In 1989, the first Airborne Arctic Stratospheric Expedition (AASE-I), staged from Stavanger, Norway, and using the same aircraft employed for AAOE (the NASA ER-2 and the NASA DC-8), discovered that while NOx and to some degree NOy were perturbed within the arctic vortex, there was little evidence for desiccation. Under these (in contrast to the antarctic) marginally perturbed conditions, however, ClO was found to be dramatically enhanced such that a large fraction of the available (inorganic) chlorine resided in the form of ClO and its dimer ClOOCl.This leaves two abiding issues for the northern hemisphere and the mission of the second Airborne Arctic Stratospheric Expedition (AASE-II): (1) Will significant ozone erosion occur within the arctic vortex in the next ten years as chlorine loading in the stratosphere exceeds four parts per billion by volume? (2) Which mechanisms are responsible for the observed ozone erosion poleward of 30°N in the winter/spring northern hemisphere reported in satellite observations?

Riverland expedited response action proposal

International Nuclear Information System (INIS)

1993-04-01

The US Environmental Protection Agency (EPA) and Washington Department of Ecology (Ecology) recommended that the US Department of Energy (DOE) prepare an expedited response action (ERA) for the Riverland Railroad Car Wash Pit and the 600 Area Army Munitions Burial Site. A non-time-critical ERA proposal includes preparation of an engineering evaluation/cost analysis (EE/CA) section. The EE/CA is a rapid, focused evaluation of available technologies using specific screening factors to assess feasibility, appropriateness, and cost. The ERA proposal will undergo reviews by Westinghouse Hanford Company (WHC), DOE, EPA, Ecology, and the public. Ecology and EPA will issue an Action Agreement Memorandum after resolution of all review comments. The, memorandum will authorize remediation activities. The ERA goal is to reduce the potential for any contaminant migration to the soil column, groundwater, and Columbia River. The ERA may be the final remediation of the 100-IU-1 Operable Unit. A No Action Record of Decision may be issued after cleanup completion

Technical procedures for aeromagnetic surveys in Antarctica during the Italian expeditions (1988-1992

Directory of Open Access Journals (Sweden)

D. Damaske

1994-06-01

Full Text Available For most of Antarctica, the geophysical data now available are those of aeromagnetic surveys performed there from 1950 to 1960. Until 1984, the inaccurate positioning and insufficient monitoring of geomagnetic time variations allowed the investigation of the geomagnetic residual field only along profiles. The Ganovex IV aeromagnetic survey, performed by BGR-USGS over the Ross Sea and the Northern Victoria Land, and the geophysical investigations of BAS on the Southern Antarctic peninsula and the Ronne ice shelf region corresponds to the recent advancement of these techniques in Antarctica. The first experiments of aeromagnetic measurements, during the Italian expeditions in Antarctica were made during the 1988-1989 field season. Some geomagnetic helicopter borne profiles were accomplished with a Proton Precession Magnetometer (PPM in the Terra Nova Bay-Gerlache Inlet area. In the 1989-1990 ItaliAntartide expedition some profiles were flown over the suture between the Wilson and Bower terranes, in Northern Victoria Land. During the 1991-1992 expedition, in cooperation with researchers of BGR (Bundesanstalt fur Geowissenschaften und Rohstoffe of Hannover, the GITARA I (German ITalian Aeromagnetic Rescarch Antarctica program, as part of the LIRA (Litospheric Investigation in the Ross Sea Area project, was carried out. The investigated area lies between the latitudes 74°18' S and 75°18' S and the longitudes 160°30' E and 164°30'E and it corresponds to a portion of the North Victoria Land, located between the Eisenhower Range and the, DrygaIski Ice Tongue. The survey was made with a Cesium vapour magnetometer. The positioning system was of the “Range-Range” type, it consisted of three transmitters (beacons, installed inside the investigated area and located with GPS measurements. The line spacing was 4.4 km, with tie lines every 22 km. The survey covered an area of 6500 km2 . Four PPM base stations for the determination of the time variation

Effect of bulk-fill base material on fracture strength of root-filled teeth restored with laminate resin composite restorations.

Science.gov (United States)

Taha, N A; Maghaireh, G A; Ghannam, A S; Palamara, J E

2017-08-01

To evaluate the effect of using a bulk-fill flowable base material on fracture strength and fracture patterns of root-filled maxillary premolars with MOD preparations restored with laminate restorations. Fifty extracted maxillary premolars were selected for the study. Standardized MOD cavities with endodontic treatment were prepared for all teeth, except for intact control. The teeth were divided randomly into five groups (n=10); (Group 1) sound teeth, (Group 2) unrestored teeth; (Group 3) MOD cavities with Vitrebond base and resin-based composite (Ceram. X One Universal); (Group 4) MOD cavities with 2mm GIC base (Fuji IX GP) and resin-based composite (Ceram. X One Universal) open laminate, (Group 5) MOD cavities were restored with 4mm of bulk-fill flowable base material (SDR) and resin-based composite (Ceram. X One Universal). All teeth were thermocycled and subjected to a 45° ramped oblique load in a universal testing machine. Fracture load and fracture patterns were recorded. Data were analyzed using one-way ANOVA and Dunnett's T3 test. Restoration in general increased the fracture strength compared to unrestored teeth. The fracture strength of group 5 (bulk-fill) was significantly higher than the fracture strength of the GIC laminate groups and not significantly different from the intact teeth (355±112N, P=0.118). The type of failure was unfavorable for most of the groups, with the majority being mixed failures. The use of a bulk-fill flowable base material significantly increased the fracture strength of extracted root-filled teeth with MOD cavities; however it did not improve fracture patterns to more favorable ones. Investigating restorative techniques that may improve the longevity of root-filled premolar teeth restored with direct resin restorations. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Missing Link Expeditions; or how the Peking Man wasn't found

DEFF Research Database (Denmark)

Kjærgaard, Peter C.

2012-01-01

to China as ‘the palaeontological Garden of Eden’. The United States made their bid through a large-scale operation popularly known as ‘The Missing Link Expeditions’. The aim was to use all modern technologies available. Hopes were high and the leader of the expedition, Roy Chapman Andrews, estimated...

The Foraminifera of the Saba Bank Expedition, 1972 (Cicar Cruises 34, 35)

NARCIS (Netherlands)

Hofker, J.

1980-01-01

INTRODUCTION Bottom samples obtained by means of a Van Veen grab during the 1972 Saba Bank Expedition (CICAR cruises 34 and 35) appeared to comprise many samples with Foraminifera. This material was kindly put at my disposal by Dr. D. van Harten of the Geological Institute of the University of

Optimization of foam-filled bitubal structures for crashworthiness criteria

International Nuclear Information System (INIS)

Zhang, Yong; Sun, Guangyong; Li, Guangyao; Luo, Zhen; Li, Qing

2012-01-01

Highlights: ► The paper aims to optimize foam-filled bitubal squared column for crashworthiness. ► It explores different formulations and configurations of design. ► The optimal foam-filled bitubal column is better than foam-filled monotubal column. ► The optimal foam-filled bitubal column is better than empty bitubal column. -- Abstract: Thin-walled structures have been widely used as key components in automobile and aerospace industry to improve the crashworthiness and safety of vehicles while maintaining overall light-weight. This paper aims to explore the design issue of thin-walled bitubal column structures filled with aluminum foam. As a relatively new filler material, aluminum foam can increase crashworthiness without sacrificing too much weight. To optimize crashworthiness of the foam-filled bitubal square column, the Kriging meta-modeling technique is adopted herein to formulate the objective and constraint functions. The genetic algorithm (GA) and Non-dominated Sorting Genetic Algorithm II (NSGA II) are used to seek the optimal solutions to the single and multiobjective optimization problems, respectively. To compare with other thin-walled configurations, the design optimization is also conducted for empty bitubal column and foam-filled monotubal column. The results demonstrate that the foam-filled bitubal configuration has more room to enhance the crashworthiness and can be an efficient energy absorber.

Stability of the split-band solution and energy gap in the narrow-band region of the Hubbard model

International Nuclear Information System (INIS)

Arai, T.; Cohen, M.H.

1980-01-01

By inserting quasielectron energies ω calculated from the fully renormalized Green's function of the Hubbard model obtained in the preceding paper into the exact expression of Galitskii and Migdal, the ground-state energy, the chemical potential, and the dynamic- and thermodynamic-stability conditions are calculated in the narrow-band region. The results show that as long as the interaction energy I is finite, electrons in the narrow-band region do not obey the Landau theory of Fermi liquids, and a gap appears between the lowest quasielectron energy ω and the chemical potential μ for any occupation n, regardless of whether the lower band is exactly filled or not. This unusual behavior is possible because, when an electron is added to the system of N electrons, the whole system relaxes due to the strong interaction, introducing a relaxation energy difference between the two quantities. We also show that all previous solutions which exhibit the split-band structure, including Hubbard's work, yield the same conclusion that electrons do not behave like Landau quasiparticles. However, the energy gap is calculated to be negative at least for some occupations n, demonstrating the dynamic instability of those solutions. They also exhibit thermodynamic instability for certain occupations, while the fully renormalized solution, having sufficient electron correlations built in, satisfies the dynamic and thermodynamic stability conditions for all occupations. When the lower band is nearly filled, the nature of the solution is shown to change, making the coherent motion of electrons with fixed k values more difficult. In the pathological limit where I=infinity, however, the gap vanishes, yielding a metallic state

Magnetically Active and Coated Gadolinium-Filled Carbon Nanotubes

KAUST Repository

Fidiani, Elok; Da Costa, Pedro M. F. J.; Wolter, Anja U. B.; Maier, Diana; Buechner, Bernd; Hampel, Silke

2013-01-01

Gd-filled carbon nanotubes (which include the so-called gadonanotubes(1)) have been attracting much interest due to their potential use in medical diagnostic applications. In the present work, a vacuum filling method was performed to confine gadolinium(III) iodide in carbon nanotubes (CNTs). Filling yields in excess of 50% were obtained. Cleaning and dosing of the external walls was undertaken, as well as the study of the filled CNT magnetic properties. Overall, we found that the encapsulating procedure can lead to reduction of the lanthanide metal and induce disorder in the initial GdI3-type structure. Notwithstanding, the magnetic response of the material is not compromised, retaining a strong paramagnetic response and an effective magnetic moment of similar to 6 mu B. Our results may entice further investigation into whether an analogous Gd3+ to Gd2+ reduction takes place in other Gd-filled CNT systems.

Magnetically Active and Coated Gadolinium-Filled Carbon Nanotubes

KAUST Repository

Fidiani, Elok

2013-08-15

Gd-filled carbon nanotubes (which include the so-called gadonanotubes(1)) have been attracting much interest due to their potential use in medical diagnostic applications. In the present work, a vacuum filling method was performed to confine gadolinium(III) iodide in carbon nanotubes (CNTs). Filling yields in excess of 50% were obtained. Cleaning and dosing of the external walls was undertaken, as well as the study of the filled CNT magnetic properties. Overall, we found that the encapsulating procedure can lead to reduction of the lanthanide metal and induce disorder in the initial GdI3-type structure. Notwithstanding, the magnetic response of the material is not compromised, retaining a strong paramagnetic response and an effective magnetic moment of similar to 6 mu B. Our results may entice further investigation into whether an analogous Gd3+ to Gd2+ reduction takes place in other Gd-filled CNT systems.

Filling the implementation gap: a community-academic partnership approach to early intervention in psychosis.

Science.gov (United States)

Hardy, Kate V; Moore, Melissa; Rose, Demian; Bennett, Robert; Jackson-Lane, Carletta; Gause, Michael; Jackson, Alma; Loewy, Rachel

2011-11-01

The aim of this study was to describe the development of a sustainable community early psychosis programme created through an academic-community partnership in the United States to other parties interested in implementing early psychosis services founded upon evidence-based practices within community settings. The service was developed around a sustainable core of key components, founded upon evidence-based practice, with additional flexible elements that could be adapted to the needs of the individual commissioning county. This paper describes the ways in which funding was sourced and secured as well as the partnerships developed through this process. Successful development of the Prevention and Recovery from Early Psychosis (PREP) programme in San Francisco County, California. PREP clinicians have received extensive training in the evidence-based approaches that are available through the programme and treated 30 clients and their families in the first year of operation. Development of a sustainable community programme of this type in a non-universal health-care setting, which is historically seen as non-integrated, required extensive partnering with agencies familiar with local resources. Implementation of the community-academic partnership bridged the gap between research and practice with successful integration of fidelity practice at the community level. The community partners were effective in sourcing funding and allocating resources, while the academic side of the partnership provided training in evidence-based models and oversight of clinical implementation of the model. Stringent evaluation of the impact of the service is our next focus. © 2011 Blackwell Publishing Asia Pty Ltd.

The Knowledge Gap Versus the Belief Gap and Abstinence-Only Sex Education.

Science.gov (United States)

Hindman, Douglas Blanks; Yan, Changmin

2015-08-01

The knowledge gap hypothesis predicts widening disparities in knowledge of heavily publicized public affairs issues among socioeconomic status groups. The belief gap hypothesis extends the knowledge gap hypothesis to account for knowledge and beliefs about politically contested issues based on empirically verifiable information. This analysis of 3 national surveys shows belief gaps developed between liberals and conservatives regarding abstinence-only sex education; socioeconomic status-based knowledge gaps did not widen. The findings partially support both belief gap and knowledge gap hypotheses. In addition, the unique contributions of exposure to Fox News, CNN, and MSNBC in this process were investigated. Only exposure to Fox News was linked to beliefs about abstinence-only sex education directly and indirectly through the cultivation of conservative ideology.

Effects of an Arctic Ocean Ski Traverse on the Protective Capabilities of Expedition Footwear

National Research Council Canada - National Science Library

Endrusick, Thomas; Frykman, Peter; O'Brien, Catherine; Giblo, Joseph

2005-01-01

A traverse of the Arctic Ocean during a 2000-km unsupported ski expedition provided an opportunity to assess the impact of an extreme cold environment on the protective capabilities of a specialized footwear system (FS...

Tension-filled Governance?

DEFF Research Database (Denmark)

Celik, Tim Holst

on the statesituated tension-filled functional relationship between legitimation and accumulation, the study both historically and theoretically reworks this approach and reapplies it for the post-1970s/1990s governance period. It asks whether and to what extent governance has served as a distinctive post- 1970s/1990s...

Combining expedited cleanup with innovative technology demonstrations

International Nuclear Information System (INIS)

Hagood, M.C.; Rohay, V.J.; Valcich, P.J.; Brouns, T.M.; Cameron, R.J.

1993-04-01

A Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) expedited response action (ERA) has been initiated at the Hanford Site, Washington, for the removal of carbon tetrachloride from contaminated soils to mitigate further contamination of the groundwater. Soil vapor extraction with aboveground collection and treatment was chosen as the preferred remedial technology for the first phase of the ERA. At the same time, innovative technology demonstrations are being conducted in coordination with the ERA to determine the viability of emerging technologies that can be used to characterize, remediate, and monitor carbon tetrachloride and cocontaminants. The overall goal is to improve the performance and decrease the costs of carbon tetrachloride remediation while maintaining a safe working environment

Regression analysis for bivariate gap time with missing first gap time data.

Science.gov (United States)

Huang, Chia-Hui; Chen, Yi-Hau

2017-01-01

We consider ordered bivariate gap time while data on the first gap time are unobservable. This study is motivated by the HIV infection and AIDS study, where the initial HIV contracting time is unavailable, but the diagnosis times for HIV and AIDS are available. We are interested in studying the risk factors for the gap time between initial HIV contraction and HIV diagnosis, and gap time between HIV and AIDS diagnoses. Besides, the association between the two gap times is also of interest. Accordingly, in the data analysis we are faced with two-fold complexity, namely data on the first gap time is completely missing, and the second gap time is subject to induced informative censoring due to dependence between the two gap times. We propose a modeling framework for regression analysis of bivariate gap time under the complexity of the data. The estimating equations for the covariate effects on, as well as the association between, the two gap times are derived through maximum likelihood and suitable counting processes. Large sample properties of the resulting estimators are developed by martingale theory. Simulations are performed to examine the performance of the proposed analysis procedure. An application of data from the HIV and AIDS study mentioned above is reported for illustration.