WorldWideScience

Sample records for exergetic sustainability parameters

  1. Improving exergetic and sustainability parameters of a DI diesel engine using polymer waste dissolved in biodiesel as a novel diesel additive

    International Nuclear Information System (INIS)

    Aghbashlo, Mortaza; Tabatabaei, Meisam; Mohammadi, Pouya; Pourvosoughi, Navid; Nikbakht, Ali M.; Goli, Sayed Amir Hossein

    2015-01-01

    Highlights: • Exergy analysis of diesel engine fuelled with various SBE biodiesel–diesel blends containing EPS. • Profound effect of engine speed and load on exergetic performance parameters of diesel engine. • Selection of B5 containing 50 g EPS/L biodiesel as the best mixture. • Potential application of the applied framework for optimizing sustainability index of IC engines. - Abstract: Exergy analysis of a DI diesel engine running on several biodiesel/diesel blends (B5) containing various quantities of expanded polystyrene (EPS) was carried out. Neat diesel and B5 were also investigated during the engine tests. The biodiesel used was produced using waste oil extracted from spend bleaching earth (SBE). The experiments were conducted to assess the effects of fuel type, engine speed, and load on thermal efficiency, exergetic parameters, and sustainability index of the diesel engine. The obtained results revealed that the exergetic parameters strongly depended on the engine speed and load. Generally, increasing engine speed remarkably decreased the exergy efficiency and sustainability index of the diesel engine. However, increasing engine load initially enhanced the exergy efficiency and sustainability index, while its further augmentation did not profoundly affect these parameters. The maximum exergy efficiency and sustainability index of the diesel engine (i.e. 40.21% and 1.67, respectively) were achieved using B5 containing 50 g EPS/L biodiesel. Generally, the approach presented herein could be a promising strategy for energy recovery from polymer waste, emissions reduction, and performance improvement. The findings of the present study also confirmed that exergy analysis could be employed to minimize the irreversibility and losses occurring in modern engines and to enhance the sustainability index of combustion processes.

  2. Sustainability assessment of turbofan engine with mixed exhaust through exergetic approach

    Science.gov (United States)

    Saadon, S.; Redzuan, M. S. Mohd

    2017-12-01

    In this study, the theory, methods and example application are described for a CF6 high-bypass turbofan engine with mixed exhaust flow based on exergo-sustainable point of view. To determine exergetic sustainability index, the turbofan engine has to undergo detailed exergy analysis. The sustainability indicators reviewed here are the overall exergy efficiency of the system, waste exergy ratio, exergy destruction factor, environmental effect factor and the exergetic sustainability index. The results obtained for these parameters are 26.9%, 73.1%, 38.6%, 2.72 and 0.37, respectively, for the maximum take-off condition of the engine. These results would be useful to better understand the connection between the propulsion system parameters and their impact to the environment in order to make it more sustainable for future development.

  3. Application of exergetic sustainability index to a nano-scale irreversible Brayton cycle operating with ideal Bose and Fermi gasses

    Energy Technology Data Exchange (ETDEWEB)

    Açıkkalp, Emin, E-mail: eacikkalp@gmail.com [Department of Mechanical and Manufacturing Engineering, Engineering Faculty, Bilecik S.E. University, Bilecik (Turkey); Caner, Necmettin [Department of Chemistry, Faculty of Arts and Sciences, Eskisehir Osmangazi University, Eskisehir (Turkey)

    2015-09-25

    Highlights: • An irreversible Brayton cycle operating quantum gasses is considered. • Exergetic sustainability index is derived for nano-scale cycles. • Nano-scale effects are considered. • Calculation are conducted for irreversible cycles. • Numerical results are presented and discussed. - Abstract: In this study, a nano-scale irreversible Brayton cycle operating with quantum gasses including Bose and Fermi gasses is researched. Developments in the nano-technology cause searching the nano-scale machines including thermal systems to be unavoidable. Thermodynamic analysis of a nano-scale irreversible Brayton cycle operating with Bose and Fermi gasses was performed (especially using exergetic sustainability index). In addition, thermodynamic analysis involving classical evaluation parameters such as work output, exergy output, entropy generation, energy and exergy efficiencies were conducted. Results are submitted numerically and finally some useful recommendations were conducted. Some important results are: entropy generation and exergetic sustainability index are affected mostly for Bose gas and power output and exergy output are affected mostly for the Fermi gas by x. At the high temperature conditions, work output and entropy generation have high values comparing with other degeneracy conditions.

  4. Understanding sustainability from an exergetic frame in complex adaptive systems

    International Nuclear Information System (INIS)

    Aguilar Hernandez, Glem Alonso

    2017-01-01

    The concept of sustainability was developed from thermodynamic properties applied to complex adaptive systems. The origins of the perception about sustainable development and limitation in its application to analyze the interaction between a system and its surroundings were described. The properties of a complex adaptive system were taken as basis to determine how a system can to be affected by the resources restriction and irreversibility of the processes. The complex adaptive system was understood using the first and second law of thermodynamics, generating a conceptual framework to define the sustainability of a system. The contributions developed by exergy were shown to analyze the sustainability of systems in an economic, social and environmental context [es

  5. Exergetic effects of some design parameters on the small turbojet engine

    Energy Technology Data Exchange (ETDEWEB)

    Turan, Onder [Anadolu University, School of Civil Aviation (Turkey)], e-mail: onderturan@anadolu.edu.tr

    2011-07-01

    With increasing energy demand and the depletion of fossil fuel reserves, research is being done in the aeronautics sector on improving the efficiency of engines and reducing their fuel consumption. The aim of this study was to determine the impact of design parameters on the performance of a small turbojet engine composed of an inlet, centrifugal compressor, axial flow turbine, exhaust nozzle and reverse flow compression chamber. An exergetic analysis, which allows the loss locations to be assessed and efficiencies to be evaluated in a meaningful way, was carried out under different environments and at different flight velocities. Results showed that high compressor pressure and high turbine inlet temperature significantly increase energy efficiency but the exergy efficiency increase is lower. This study demonstrated that the the second law of thermodynamics, and not only the first law, is highly relevant to the proper understanding of aircraft engine performance.

  6. An oil palm-based biorefinery concept for cellulosic ethanol and phytochemicals production: Sustainability evaluation using exergetic life cycle assessment

    International Nuclear Information System (INIS)

    Ofori-Boateng, Cynthia; Lee, Keat Teong

    2014-01-01

    In this study, thermo-environmental sustainability of an oil palm-based biorefinery concept for the co-production of cellulosic ethanol and phytochemicals from oil palm fronds (OPFs) was evaluated based on exergetic life cycle assessment (ExLCA). For the production of 1 tonne bioethanol, the exergy content of oil palm seeds was upgraded from 236 MJ to 77,999 MJ during the farming process for OPFs production. Again, the high exergy content of the OPFs was degraded by about 62.02% and 98.36% when they were converted into cellulosic ethanol and phenolic compounds respectively. With a total exergy destruction of about 958,606 MJ (internal) and 120,491 MJ (external or exergy of wastes), the biorefinery recorded an overall exergy efficiency and thermodynamic sustainability index (TSI) of about 59.05% and 2.44 per tonne of OPFs' bioethanol respectively. Due to the use of fossil fuels, pesticides, fertilizers and other toxic chemicals during the production, the global warming potential (GWP = 2265.69 kg CO 2 eq.), acidification potential (AP = 355.34 kg SO 2 eq.) and human toxicity potential (HTP = 142.79 kg DCB eq.) were the most significant environmental impact categories for a tonne of bioethanol produced in the biorefinery. The simultaneous saccharification and fermentation (SSF) unit emerged as the most exergetically efficient (89.66%), thermodynamically sustainable (TSI = 9.67) and environmentally friendly (6.59% of total GWP) production system. -- Highlights: • Thermo-environmental sustainability of palm-based biorefinery was assessed. • OPFs' exergy content was degraded when converted into bioethanol and phytochemicals. • Exergy efficiency (59.05%) and TSI (2.44) were recorded for the biorefinery • Global warming potential of 2265.6 kg CO 2 eq. was recorded for the whole biorefinery

  7. Exergetic optimization of a key design parameter in heat pump systems with economizer coupled with scroll compressor

    International Nuclear Information System (INIS)

    Ma, Guoyuan; Li, Xianguo

    2007-01-01

    The heat pump system with economizer coupled with scroll compressor can extend effectively its operating ranges and provide a technological method to enable the heat pump to run steadily and efficiently in severe weather conditions. The intermediate pressure, namely the working pressure of the refrigerant in the economizer, is an essential design parameter and affects crucially the performances of the heat pump system. According to the exergetic model setup for the heat pump system based on the second law of thermodynamics, the influences of the intermediate pressure on the performances are comprehensively analyzed using experimental data of the heat pump prototype. It is found that the optimal relative intermediate pressure (RIP) is between 1.1 and 1.3

  8. Environmental, economic and exergetic sustainability assessment of power generation from fossil and renewable energy sources

    NARCIS (Netherlands)

    Stougie, L.; Giustozzi, N.; van der Kooi, H.J.; Stoppato, Anna

    2018-01-01

    Energy conversion systems have assumed a crucial role in current society. The threat of climate change, fossil fuel depletion and the growing world energy demand ask for a more sustainable way of electricity production, eg, by using renewable energy sources, by improving the conversion efficiency

  9. Hydrogen as a renewable and sustainable solution in reducing global fossil fuel consumption

    International Nuclear Information System (INIS)

    Midilli, Adnan; Dincer, Ibrahim

    2008-01-01

    In this paper, hydrogen is considered as a renewable and sustainable solution for reducing global fossil fuel consumption and combating global warming and studied exergetically through a parametric performance analysis. The environmental impact results are then compared with the ones obtained for fossil fuels. In this regard, some exergetic expressions are derived depending primarily upon the exergetic utilization ratios of fossil fuels and hydrogen: the fossil fuel based global waste exergy factor, hydrogen based global exergetic efficiency, fossil fuel based global irreversibility coefficient and hydrogen based global exergetic indicator. These relations incorporate predicted exergetic utilization ratios for hydrogen energy from non-fossil fuel resources such as water, etc., and are used to investigate whether or not exergetic utilization of hydrogen can significantly reduce the fossil fuel based global irreversibility coefficient (ranging from 1 to +∞) indicating the fossil fuel consumption and contribute to increase the hydrogen based global exergetic indicator (ranging from 0 to 1) indicating the hydrogen utilization at a certain ratio of fossil fuel utilization. In order to verify all these exergetic expressions, the actual fossil fuel consumption and production data are taken from the literature. Due to the unavailability of appropriate hydrogen data for analysis, it is assumed that the utilization ratios of hydrogen are ranged between 0 and 1. For the verification of these parameters, the variations of fossil fuel based global irreversibility coefficient and hydrogen based global exergetic indicator as the functions of fossil fuel based global waste exergy factor, hydrogen based global exergetic efficiency and exergetic utilization of hydrogen from non-fossil fuels are analyzed and discussed in detail. Consequently, if exergetic utilization ratio of hydrogen from non-fossil fuel sources at a certain exergetic utilization ratio of fossil fuels increases

  10. On the exergetic capacity factor of a wind – Solar power generation system

    DEFF Research Database (Denmark)

    Xydis, George

    2013-01-01

    production. In this paper, a detailed exergetic analysis aiming to identify the overall Exergetic Capacity Factor (ExCF) for a wind – solar power generation system was done. ExCF, as a new parameter, can be used for better classification and evaluation of renewable energy sources (RES). All the energy...... and exergy characteristics of wind and solar energy were examined in order to identify the variables that affect the power output of the hybrid system. A validated open source PV optimization tool was also included in the analysis, It was shown that parameters as e.g. air density or tracking losses, low......In the recent years, exergy analysis has become a very important tool in the evaluation of systems’ efficiency. It aims on minimizing the energy related-system losses and therefore maximizing energy savings and helps society substantially to move towards sustainable development and cleaner...

  11. Exergetic analysis and optimization of a solar-powered reformed methanol fuel cell micro-powerplant

    Science.gov (United States)

    Hotz, Nico; Zimmerman, Raúl; Weinmueller, Christian; Lee, Ming-Tsang; Grigoropoulos, Costas P.; Rosengarten, Gary; Poulikakos, Dimos

    The present study proposes a combination of solar-powered components (two heaters, an evaporator, and a steam reformer) with a proton exchange membrane fuel cell to form a powerplant that converts methanol to electricity. The solar radiation heats up the mass flows of methanol-water mixture and air and sustains the endothermic methanol steam reformer at a sufficient reaction temperature (typically between 220 and 300 °C). In order to compare the different types of energy (thermal, chemical, and electrical), an exergetic analysis is applied to the entire system, considering only the useful part of energy that can be converted to work. The effect of the solar radiation intensity and of different operational and geometrical parameters like the total inlet flow rate of methanol-water mixture, the size of the fuel cell, and the cell voltage on the performance of the entire system is investigated. The total exergetic efficiency comparing the electrical power output with the exergy input in form of chemical and solar exergy reaches values of up to 35%, while the exergetic efficiency only accounting for the conversion of chemical fuel to electricity (and neglecting the 'cost-free' solar input) is increased up to 59%. At the same time, an electrical power density per irradiated area of more than 920 W m -2 is obtained for a solar heat flux of 1000 W m -2.

  12. Global exergetic dimension of hydrogen use in reducing fossil fuel consumption

    International Nuclear Information System (INIS)

    Adnan Midilli; Ibrahim Dincer

    2009-01-01

    In this paper, hydrogen is considered as a renewable and sustainable solution for minimizing the fossil fuel based-global irreversibility coefficient of global fossil fuel consumption and combating global warming and studied exergetically through a parametric performance analysis. The environmental impact results are then compared with the ones obtained for fossil fuels. In this regard, some exergetic expressions such as global waste exergy factor, global irreversibility coefficient and hydrogen based-global exergetic indicator. In order to investigate the role of hydrogen use at minimizing the fossil fuel based global irreversibility, the actual fossil fuel consumption data are taken from the literature. Due to the unavailability of appropriate hydrogen data for analysis, it is assumed that the utilization ratios of hydrogen are ranged between 0 and 1. Consequently, if exergetic utilization ratio of hydrogen from non-fossil fuel sources at a certain exergetic utilization ratio of fossil fuels increases, the fossil fuel based-global irreversibility coefficient will decrease. (author)

  13. Exergetic Modelling of Oil-Fired Steam Boilers | Ohijeagbon ...

    African Journals Online (AJOL)

    The performance variables and potential for energy savings in oil-fired industrial steam boilers were studied. Operational parameters of steam boilers using low pour fuel oil (LPFO) and diesel were used to determine thermodynamic properties of material streams and exergetic parameters. Analysis of thermodynamic ...

  14. Exergetic performance analysis of a recirculating aquaculture system

    International Nuclear Information System (INIS)

    Kucuk, Haydar; Midilli, Adnan; Ozdemir, Atilla; Cakmak, Eyuep; Dincer, Ibrahim

    2010-01-01

    This paper examines exergetic aspects of a Recirculation Aquaculture System (RAS) for Black Sea trout (Salmo trutta labrax) fingerling rearing at the Trabzon Central Fisheries Research Institute, Turkey. In its thermodynamic analysis, each component of the RAS is treated as a steady-state steady flow system and its exergetic efficiencies are studied. In addition, the following parameters are measured and recorded in experiments: the mass flow rates, inlet and outlet temperatures and of the system components, surrounding temperatures, and electrical work utilized by the components in the RAS. Based on these experimental data, inlet and outlet exergy values, exergy losses, and exergetic efficiencies of each component in the system are determined to assess their performance. Moreover, the overall system exergy efficiency is determined. The results show that exergy efficiencies of the system components are highly affected by varying input exergy flows as a function of the surrounding temperature and chiller's operating period.

  15. EXERGETIC ANALYSIS OF A COGENERATION POWER PLANT

    Directory of Open Access Journals (Sweden)

    Osvaldo Manuel Nuñez Bosch

    2016-07-01

    Full Text Available Cogeneration power plants connected to industrial processes have a direct impact on the overall efficiency of the plant and therefore on the economic results. Any modification to the thermal outline of these plants must first include an exergetic analysis to compare the benefits it can bring the new proposal. This research is performed to a cogeneration plant in operation with an installed electrical capacity of 24 MW and process heat demand of 190 MW, it shows a study made from the Second Law of Thermodynamics. Exergetic evaluation of each component of the plant was applied and similarly modified cogeneration scheme was evaluated. The results illustrate that the exergy losses and irreversibilities are completely different from one subsystem to another. In general, the total exergy destruction represented 70,7% from the primary fuel exergy. Steam generator was the subsystem with the highest irreversibility of the plant with 54%. It was demonstrated that the increase of the steam parameters lead to reduce exergy destruction and exergy efficiency elevation. The suppression of the reduction system and the adding of an extraction-condensing steam turbine produce the same effect and contribute to drop off the electrical consumption from the grid.

  16. Energetic and exergetic analyses of T56 turboprop engine

    International Nuclear Information System (INIS)

    Balli, Ozgur; Hepbasli, Arif

    2013-01-01

    Highlights: • Performing comprehensive energy and exergy analyses of T56 turboprop engine at various operation modes. • Proposing two new parameters, energetic and exergetic fuel-production ratios. • Calculating maximum energy efficiency values of 25.4% for Case A and 28.1% for Case B at Takeoff mode. • Accounting maximum exergy efficiency values of 23.8% for Case A and 26.3% for Case B at Takeoff mode. - Abstract: This study presents the results of energetic and exergetic analyses of T56 turboprop engine at various power loading operation modes (75%, 100%, Military and Takeoff). The energetic and exergetic performance evaluations were made for both the shaft power (Case A) and the shaft power plus the kinetic energy of exhaust gaseous (Case B). The energetic efficiency was calculated to be maximum at 25.4% for Case A and 28.1% for Case B while the exergy efficiency was obtained to be maximum at 23.8% for Case A and 26.3% for Case B at Takeoff mode, respectively. The maximum exergy destruction rate occurred within the combustion chamber. It increased from 4846.3 kW to 6234.1 kW depending on operation modes. The exergetic performance parameters, such as the relative exergy consumption, the fuel depletion ratio, the productivity lack ratio, the improvement potential and the fuel-production ratio, were also investigated. The fuel energy-production ratio decreased from 4.6 to 3.9 while the fuel exergy-production ratio decreased from 4.9 to 4.2 by increasing the produced shaft power and residual thrust. The results provided here can be helpful to regulate and select operation modes for these engine users

  17. The use of exergetic indicators in the food industry - A review.

    Science.gov (United States)

    Zisopoulos, Filippos K; Rossier-Miranda, Francisco J; van der Goot, Atze Jan; Boom, Remko M

    2017-01-02

    Assessment of sustainability will become more relevant for the food industry in the years to come. Analysis based on exergy, including the use of exergetic indicators and Grassmann diagrams, is a useful tool for the quantitative and qualitative assessment of the efficiency of industrial food chains. In this paper, we review the methodology of exergy analysis and the exergetic indicators that are most appropriate for use in the food industry. The challenges of applying exergy analysis in industrial food chains and the specific features of food processes are also discussed.

  18. Exergetic performance analysis of an ice-cream manufacturing plant: A comprehensive survey

    International Nuclear Information System (INIS)

    Dowlati, Majid; Aghbashlo, Mortaza; Mojarab Soufiyan, Mohamad

    2017-01-01

    In this study, a comprehensive exergetic performance analysis of an ice-cream manufacturing plant was conducted in order to pinpoint the locations of thermodynamic inefficiencies. Exergetic performance parameters of each subunit of the plant were determined and illustrated individually through writing and solving energy and exergy balance equations on the basis of real operational data. The required data were acquired from a local ice-cream factory located in Tehran, Iran. The plant included three main subsystems including water steam generator, refrigeration system, and ice-cream production line. An attempt was also made to quantify the specific exergy destruction of the ice-cream manufacturing process. The functional exergetic efficiency of the water steam generator, refrigeration system, and ice-cream production line was determined at 17.45%, 25.52%, and 5.71%, respectively. The overall functional exergetic efficiency of the process was found to be 2.15%, while the specific exergy destruction was calculated as 719.80 kJ/kg. In general, exergy analysis and its derivatives could provide invaluable information over the conventional energy analysis, suggesting potential locations for the plant performance improvement. - Highlights: • An ice-cream manufacturing plant was exergetically analyzed using the actual data. • Water steaming unit had the highest irreversibility rate among the plant subunits. • The specific exergy destruction of the ice-cream manufacturing was 719.80 kJ/kg. • The overall process exergetic efficiency of the process was found to be 2.15%.

  19. Exergy-based sustainability analysis of a low power, high frequency piezo-based ultrasound reactor for rapid biodiesel production

    International Nuclear Information System (INIS)

    Aghbashlo, Mortaza; Tabatabaei, Meisam; Hosseinpour, Soleiman; Khounani, Zahra; Hosseini, Seyed Sina

    2017-01-01

    Highlights: • Piezoultrasonic-assisted biodiesel production was exergetically analyzed. • Alcohol content, sonication time, and temperature affected exergetic parameters. • 6:1 methanol/oil, 10 min sonication, and 60 °C temperature were the best conditions. • The exergetic sustainability index at the favorable conditions was found to be 11. - Abstract: In this work a thermodynamic model was developed to attain enhanced process comprehension of waste cooking oil (WCO) transesterification process in a low power, high frequency piezo-based ultrasound reactor. The reactor performance was assessed using the exergy concept to distinguish the effects of various operational variables, i.e., methanol to oil molar ratio (4:1–8:1), ultrasonic irradiation time (6–10 min), and temperature (40–60 °C) on the efficiency and sustainability factors. The exergetic efficiency of the developed reactor was found to be ranging from 98% to 99% and from 9% to 91% using the universal and functional definitions, respectively. The maximum functional exergetic efficiency as a decision making parameter, was found at 91% for methanol to oil molar ratio of 6:1, ultrasonic irradiation time of 10 min, and temperature of 60 °C. The exergetic sustainability index of the transesterification process at the selected conditions was determined at about 11. Under these conditions, the reactor efficiently converted triglycerides to methyl esters with an acceptable conversion efficiency of 97%, satisfying the ASTM standard. Overall, the outcomes of the current survey manifested that exergy analysis can be a preferred basis for decision making on the efficiency and sustainability of various biodiesel synthesizing systems.

  20. Energetic, exergetic and financial evaluation of a solar driven absorption chiller – A dynamic approach

    International Nuclear Information System (INIS)

    Bellos, Evangelos; Tzivanidis, Christos; Symeou, Christoforos; Antonopoulos, Kimon A.

    2017-01-01

    Highlights: • A solar cooling system with ETC and a single effect absorption chiller is analyzed. • The analysis is dynamic and it is made for the city of Athens, Greece. • The analysis is energetic, exergetic and financial for all the summer period. • Firstly the system is optimized exergetically and after it is analyzed financially. • The optimum case is 450 m"2 of solar collectors coupled with a storage tank of 14 m"3. - Abstract: In this study, a solar cooling system of 100 kW is analyzed parametrically in dynamic basis for the city of Athens, Greece. The objective of this study is the design of a sustainable system, using energetic, exergetic and financial criteria. The examined system includes evacuated tube collectors, storage tank and a single stage absorption chiller operating with LiBr-H_2O working pair. Different combinations of collecting areas and storage tank volumes are tested in order to determine the most suitable cases exergetically. These optimum cases are evaluated financially and finally the system with the higher financial indexes is selected as the most suitable. More specifically, the collecting area is analyzed from 150 m"2 to 600 m"2 and the storage tank from 6 m"3 to 16 m"3. Finally, 450 m"2 of evacuated tube collectors with a 14 m"3 storage tank was proved to be the optimum solution financially with 15 years payback period and 67 k€ net present value.

  1. Investigation of turbidity effect on exergetic performance of solar ponds

    International Nuclear Information System (INIS)

    Atiz, Ayhan; Bozkurt, Ismail; Karakilcik, Mehmet; Dincer, Ibrahim

    2014-01-01

    Highlights: • A comprehensive experimental work on a turbidity of the solar pond. • Percentage transmission evaluation of the turbid and clean salty water of the zones. • Exergy analysis of the inner zones for turbid and clean salty water. • Turbidity effect on exergy efficiencies of the solar pond. • The thermal performance assessment by comparing the exergetic efficiencies of the solar pond. - Abstract: The present paper undertakes a study on the exergetic performance assessment of a solar pond and experimental investigation of turbidity effect on the system performance. There are various types of solar energy applications including solar ponds. One of significant parameters to consider in the assessment of solar pond performance is turbidity which is caused by dirty over time (e.g., insects, leaf, dust and wind bringing parts fall down). Thus, the turbidity in the salty water decreases solar energy transmission through the zones. In this study, the samples are taken from the three zones of the solar pond and analyzed using a spectrometer for three months. The transmission aspects of the solar pond are investigated under calm and turbidity currents to help distinguish the efficiencies. Furthermore, the maximum exergy efficiencies are found to be 28.40% for the calm case and 22.27% with turbidity effects for the month of August, respectively. As a result, it is confirmed that the solar pond performance is greatly affected by the turbidity effect

  2. Energetic and exergetic Improvement of geothermal single flash cycle

    Directory of Open Access Journals (Sweden)

    Navid Nazari

    2016-08-01

    Full Text Available This paper presents a detailed analysis of a new method for improving energetic and exergetic efficiencies of single flash cycle. The thermodynamic process of the new method consists of extracting a fraction of hot wellhead geothermal brine for the purpose of superheating saturated steam entering the turbine. Computer programming scripts were developed and optimized based on mathematical proposed models for the different components of the systems. The operating parameters such as separator temperature, geofluid wellhead enthalpy and geothermal source temperature are varied to investigate their effects on both net power output and turbine exhaust quality of the systems. Also, full exergy assessment was performed for the new design. The results of separator temperature optimization revealed that specific net power output of the new design can be boosted up to 8% and turbine exhaust quality can be diminished up to 50% as compared to common single flash cycle. In addition, for wells with higher discharge enthalpy, superheating process improve specific net power output even up to 10%. Finally, it was observed that the overall system exergy efficiency was approximately raised 3%. Article History: Received January 5th 2016; Received in revised form June 25th 2016; Accepted July 3rd 2016; Available online How to Cite This Article: Nazari, N. and Porkhial, S. (2016. Energetic and Exergetic Improvement of Geothermal Single Flash Cycle. Int. Journal of Renewable Energy Development, 5(2,129-138. http://dx.doi.org/10.14710/ijred.5.2.129-138 

  3. Energetic and Exergetic Analysis of a Heat Exchanger Integrated in a Solid Biomass-Fuelled Micro-CHP System with an Ericsson Engine

    Directory of Open Access Journals (Sweden)

    Marie Creyx

    2016-04-01

    Full Text Available A specific heat exchanger has been developed to transfer heat from flue gas to the working fluid (hot air of the Ericsson engine of a solid biomass-fuelled micro combined heat and power (CHP. In this paper, the theoretical and experimental energetic analyses of this heat exchanger are compared. The experimental performances are described considering energetic and exergetic parameters, in particular the effectiveness on both hot and cold sides. A new exergetic parameter called the exergetic effectiveness is introduced, which allows a comparison between the real and the ideal heat exchanger considering the Second Law of Thermodynamics. A global analysis of exergetic fluxes in the whole micro-CHP system is presented, showing the repartition of the exergy destruction among the components.

  4. Exergetic optimization of a thermoacoustic engine using the particle swarm optimization method

    International Nuclear Information System (INIS)

    Chaitou, Hussein; Nika, Philippe

    2012-01-01

    Highlights: ► Optimization of a thermoacoustic engine using the particle swarm optimization method. ► Exergetic efficiency, acoustic power and their product are the optimized functions. ► PSO method is used successfully for the first time in the TA research. ► The powerful PSO tool is advised to be more involved in the TA research and design. ► EE times AP optimized function is highly recommended to design any new TA devices. - Abstract: Thermoacoustic engines convert heat energy into acoustic energy. Then, the acoustic energy can be used to pump heat or to generate electricity. It is well-known that the acoustic energy and therefore the exergetic efficiency depend on parameters such as the stack’s hydraulic radius, the stack’s position in the resonator and the traveling–standing-wave ratio. In this paper, these three parameters are investigated in order to study and analyze the best value of the produced acoustic energy, the exergetic efficiency and the product of the acoustic energy by the exergetic efficiency of a thermoacoustic engine with a parallel-plate stack. The dimensionless expressions of the thermoacoustic equations are derived and calculated. Then, the Particle Swarm Optimization method (PSO) is introduced and used for the first time in the thermoacoustic research. The use of the PSO method and the optimization of the acoustic energy multiplied by the exergetic efficiency are novel contributions to this domain of research. This paper discusses some significant conclusions which are useful for the design of new thermoacoustic engines.

  5. Exergetic Analysis of a Novel Solar Cooling System for Combined Cycle Power Plants

    Directory of Open Access Journals (Sweden)

    Francesco Calise

    2016-09-01

    Full Text Available This paper presents a detailed exergetic analysis of a novel high-temperature Solar Assisted Combined Cycle (SACC power plant. The system includes a solar field consisting of innovative high-temperature flat plate evacuated solar thermal collectors, a double stage LiBr-H2O absorption chiller, pumps, heat exchangers, storage tanks, mixers, diverters, controllers and a simple single-pressure Combined Cycle (CC power plant. Here, a high temperature solar cooling system is coupled with a conventional combined cycle, in order to pre-cool gas turbine inlet air in order to enhance system efficiency and electrical capacity. In this paper, the system is analyzed from an exergetic point of view, on the basis of an energy-economic model presented in a recent work, where the obtained main results show that SACC exhibits a higher electrical production and efficiency with respect to the conventional CC. The system performance is evaluated by a dynamic simulation, where detailed simulation models are implemented for all the components included in the system. In addition, for all the components and for the system as whole, energy and exergy balances are implemented in order to calculate the magnitude of the irreversibilities within the system. In fact, exergy analysis is used in order to assess: exergy destructions and exergetic efficiencies. Such parameters are used in order to evaluate the magnitude of the irreversibilities in the system and to identify the sources of such irreversibilities. Exergetic efficiencies and exergy destructions are dynamically calculated for the 1-year operation of the system. Similarly, exergetic results are also integrated on weekly and yearly bases in order to evaluate the corresponding irreversibilities. The results showed that the components of the Joule cycle (combustor, turbine and compressor are the major sources of irreversibilities. System overall exergetic efficiency was around 48%. Average weekly solar collector

  6. Exergetic and thermoeconomic analyses of power plants

    International Nuclear Information System (INIS)

    Kwak, H.-Y.; Kim, D.-J.; Jeon, J.-S.

    2003-01-01

    Exergetic and thermoeconomic analyses were performed for a 500-MW combined cycle plant. In these analyses, mass and energy conservation laws were applied to each component of the system. Quantitative balances of the exergy and exergetic cost for each component, and for the whole system was carefully considered. The exergoeconomic model, which represented the productive structure of the system considered, was used to visualize the cost formation process and the productive interaction between components. The computer program developed in this study can determine the production costs of power plants, such as gas- and steam-turbines plants and gas-turbine cogeneration plants. The program can be also be used to study plant characteristics, namely, thermodynamic performance and sensitivity to changes in process and/or component design variables

  7. Exergetic analysis of basin type solar still

    Directory of Open Access Journals (Sweden)

    Apurba Layek

    2018-02-01

    Full Text Available Simplicity of solar distillation system makes it very attractive, but the yield as well as the overall efficiency is very low. Different types of absorng materials e.g. black ink, black dye solution in brackish water and black toner on water surface were used to evaluate their effect on the yield. As the absorng material absorbs more insolation to increase brackish water temperature, increases yield as well as overall energy efficiency. To enhance the thermal performance, and to have the insight of thermal losses; exergetic analysis of all the components is done. The maximum overall energy efficiency obtained for brackish water having these absorber on brackish water are about 41.3%, 43.42% and 45.79%, while exergetic efficiency values are 5.91%, 6.34% and 7.10% respectively. Exergy destruction from basin liner is the highest compared to that from brackish water and glazing.

  8. Exergetic efficiency analysis of hydrogen–air detonation in pulse detonation combustor using computational fluid dynamics

    Directory of Open Access Journals (Sweden)

    Pinku Debnath

    2017-03-01

    Full Text Available Exergy losses during the combustion process, heat transfer, and fuel utilization play a vital role in the analysis of the exergetic efficiency of combustion process. Detonation is thermodynamically more efficient than deflagration mode of combustion. Detonation combustion technology inside the pulse detonation engine using hydrogen as a fuel is energetic propulsion system for next generation. In this study, the main objective of this work is to quantify the exergetic efficiency of hydrogen–air combustion for deflagration and detonation combustion process. Further detonation parameters are calculated using 0.25, 0.35, and 0.55 of H2 mass concentrations in the combustion process. The simulations have been performed for converging the solution using commercial computational fluid dynamics package Ansys Fluent solver. The details of combustion physics in chemical reacting flows of hydrogen–air mixture in two control volumes were simulated using species transport model with eddy dissipation turbulence chemistry interaction. From these simulations it was observed that exergy loss in the deflagration combustion process is higher in comparison to the detonation combustion process. The major observation was that pilot fuel economy for the two combustion processes and augmentation of exergetic efficiencies are better in the detonation combustion process. The maximum exergetic efficiency of 55.12%, 53.19%, and 23.43% from deflagration combustion process and from detonation combustion process, 67.55%, 57.49%, and 24.89%, are obtained from aforesaid H2 mass fraction. It was also found that for lesser fuel mass fraction higher exergetic efficiency was observed.

  9. Exergetic efficiency optimization for an irreversible heat pump ...

    Indian Academy of Sciences (India)

    This paper deals with the performance analysis and optimization for irreversible heat pumps working on reversed Brayton cycle with constant-temperature heat reservoirs by taking exergetic efficiency as the optimization objective combining exergy concept with finite-time thermodynamics (FTT). Exergetic efficiency is ...

  10. Exergetic optimization of turbofan engine with genetic algorithm method

    Energy Technology Data Exchange (ETDEWEB)

    Turan, Onder [Anadolu University, School of Civil Aviation (Turkey)], e-mail: onderturan@anadolu.edu.tr

    2011-07-01

    With the growth of passenger numbers, emissions from the aeronautics sector are increasing and the industry is now working on improving engine efficiency to reduce fuel consumption. The aim of this study is to present the use of genetic algorithms, an optimization method based on biological principles, to optimize the exergetic performance of turbofan engines. The optimization was carried out using exergy efficiency, overall efficiency and specific thrust of the engine as evaluation criteria and playing on pressure and bypass ratio, turbine inlet temperature and flight altitude. Results showed exergy efficiency can be maximized with higher altitudes, fan pressure ratio and turbine inlet temperature; the turbine inlet temperature is the most important parameter for increased exergy efficiency. This study demonstrated that genetic algorithms are effective in optimizing complex systems in a short time.

  11. Incorporating attitudinal parameter in assessing sustainability of Malaysia manufacturing industry

    Science.gov (United States)

    Lanang, Wan Nurul Syahirah Wan; Turan, Faiz Mohd; Johan, Kartina

    2018-04-01

    Numerous companies are accepting sustainability as an organizational peremptory. There is, however, little convergence on how organizations become sustainable. The previous study suggests that a paradigm shift is necessary to incorporate more sustainable ways of thinking, while others advocate that sustainability requires only moderate behavioural changes as in attitude. In addition, it is also suggesting that sustainability develops most effectively when a singular view of sustainability is applied throughout the company; others contend that differentiated views of sustainability emerge within the various subcultures of an organization. The aim of this paper is to analyse the aftermath of considering attitudinal parameter into the initial data, portraying the true nature of personality during the survey. The research presented was carried out with employees from various manufacturing companies with different branches of knowledge and attitude. Survey methodology was employed by building a questionnaire combining Likert-type items, Sustainable Development Goals (SDGs), Green Project Management (GPM) P5 Integration and multiple-option items. The results allow identifying the knowledges and attitudes of the employees in Malaysia context, contributing relevant data in regard to future engagement relating to sustainability and attitudinal parameter.

  12. Full and part load exergetic analysis of a hybrid micro gas turbine fuel cell system based on existing components

    International Nuclear Information System (INIS)

    Bakalis, Diamantis P.; Stamatis, Anastassios G.

    2012-01-01

    Highlights: ► Hybrid SOFC/GT system based on existing components. ► Exergy analysis using AspenPlus™ software. ► Greenhouse gases emission is significantly affected by SOFC stack temperature. ► Comparison with a conventional GT of similar power. ► SOFC/GT is almost twice efficient in terms of second low efficiency and CO 2 emission. - Abstract: The paper deals with the examination of a hybrid system consisting of a pre-commercially available high temperature solid oxide fuel cell and an existing recuperated microturbine. The irreversibilities and thermodynamic inefficiencies of the system are evaluated after examining the full and partial load exergetic performance and estimating the amount of exergy destruction and the efficiency of each hybrid system component. At full load operation the system achieves an exergetic efficiency of 59.8%, which increases during the partial load operation, as a variable speed control method is utilized. Furthermore, the effects of the various performance parameters such as fuel cell stack temperature and fuel utilization factor are assessed. The results showed that the components in which chemical reactions occur have the higher exergy destruction rates. The exergetic performance of the system is affected significantly by the stack temperature. Based on the exergetic analysis, suggestions are given for reducing the overall system irreversibility. Finally, the environmental impact of the operation of the hybrid system is evaluated and compared with a similarly rated conventional gas turbine plant. From the comparison it is apparent that the hybrid system obtains nearly double exergetic efficiency and about half the amount of greenhouse gas emissions compared with the conventional plant.

  13. Exergetic performance evaluation of a single pass baffled solar air heater

    International Nuclear Information System (INIS)

    Sabzpooshani, M.; Mohammadi, K.; Khorasanizadeh, H.

    2014-01-01

    In this study, the exergetic performance of a baffled type solar air heater has been evaluated theoretically. A detailed parametric study was done to investigate the effect of variation of fin and baffle parameters, number of glass covers, bottom insulation thickness and inlet air temperature at different mass flow rates on the exergy efficiency. The results indicated that attaching fins and baffles at low mass flow rates can lead to noticeable enhancement of the exergy efficiency. The results revealed that the trend of variation of the energy and exergy efficiencies are not the same and the exergy efficiency is the chief criterion for performance evaluation. Increasing the baffles width, reducing the distance between baffles and increasing the number of fins are effective at low mass flow rates, but at high mass flow rates the inverse trend is observable, such that exergy efficiency reduces sharply. The results showed that exergy efficiency increases with increasing the solar radiation intensity. By adding the second glass cover the exergy efficiency enhances at low mass flow rates. Increasing the insulation thickness over an optimum value doesn't improve the exergy efficiency. Increasing the inlet air temperature increases the exergy efficiency especially at high mass flow rates. - Highlights: • We study the exergetic performance of an upward type baffled solar air heater. • The effect of several design parameters on the performance is investigated. • Exergetic performance is very sensitive to the variation of baffles parameters. • Adding fins and baffles and increasing their parameters are efficient at low m . . • At high m . increment of baffles parameters causes decline of the exergy efficiency

  14. A review on energetic, exergetic and exergoeconomic aspects of geothermal district heating systems (GDHSs)

    International Nuclear Information System (INIS)

    Hepbasli, Arif

    2010-01-01

    Geothermal is a reliable and promising renewable energy. In 1892 the first geothermal district heating system (GDHS) began operations in Boise, Idaho, USA. Since then, a number of GDHSs installations have been made worldwide. Various investigations on the efficient utilization of geothermal energy resources have also been conducted to attain sustainable development. There is a link between exergy and sustainable development. In recent years, exergy analysis has been widely used in the design, simulation and performance assessment of thermal systems. Exergoeconomic analysis, which is a combination of exergy and economics, is nowadays considered a powerful tool to study and optimize various types of energy-related systems. The present study comprehensively reviews GDHSs in terms of three aspects, namely energetic, exergetic and exergoeconomic analyses and assessments, for the first time to the best of the author's knowledge. A brief historical development of the studies on GDHSs was given on the base of these three aspects first. Next, GDHSs analyzed were schematically presented and shortly described. The previously conducted studies on GDHSs were then reviewed and classified. Finally, the conclusions were presented. It is expected that this comprehensive study will be very beneficial to everyone involved or interested in the energetic, exergetic and exergoeconomic design, analysis and performance evaluation of GDHSs.

  15. A comparative study on energetic, exergetic and environmental performance assessments of novel M-Cycle based air coolers for buildings

    International Nuclear Information System (INIS)

    Caliskan, Hakan; Dincer, Ibrahim; Hepbasli, Arif

    2012-01-01

    Highlights: ► Applying exergy, environment and sustainability analyses to the three (novel M-Cycle based) air coolers. ► Assessing energy and exergy efficiencies, environmental impact and sustainability. ► Proposing System II (using PV-based electricity) as the most environmentally friendly air cooler. ► Proposing System III (using coal-based electricity) as the most efficient air cooler. - Abstract: In this study, three various novel air coolers based on M-Cycle are evaluated using energy and exergy analyses based efficiency assessments along with environmental impact and sustainability parameters. The M-Cycle systems are considered to cool a building room air while their inlet air parameters are same, but outlet cooled air parameters are different. Systems I and III draw electricity directly taken from an electric grid in the building while System II, which is stand alone system, produces and draws electricity from its solar PV panels. In the energy analysis, wet bulb effectiveness, cooling capacity, Coefficient of Performance (energetic COP) and Primary Energy Ratio (PER) are found. In the exergy analysis, exergy input and output rates, exergy loss rate, exergy destruction rate, Exergetic Coefficient of Performance (COP ex ), Primary Exergy Ratio (PE x R) and exergy efficiency are obtained for six different dead state temperatures changing between 10 °C and 35 °C. Also, sustainability assessments of the systems are obtained using sustainability index (SI) tool for these various dead state temperatures. Finally, environmental assessments of the systems are calculated from their greenhouse gas (GHG) emissions (gCO 2 /kW h) due to their electricity consumptions. Maximum exergy efficiencies and sustainability assessments are found to be 35.13% and 1.5415 for System III and 34.94% and 1.5372 for System II, respectively. GHG emissions of the systems are calculated to be 2119.68 gCO 2 /day, 153.6 gCO 2 /day and 3840 gCO 2 /day for Systems I, II and III

  16. An experimental study of the exergetic performance of an underground air tunnel system for greenhouse cooling

    International Nuclear Information System (INIS)

    Ozgener, Leyla; Ozgener, Onder

    2010-01-01

    The present study highlights the exergetic performance characteristics of an underground air tunnel for greenhouse cooling with a 47 m horizontal, 56 cm nominal diameter U-bend buried galvanized ground heat exchanger. This system was designed and installed in the Solar Energy Institute, Ege University, Izmir, Turkey. Underground air tunnel systems, also known as earth-to-air heat exchangers, are recognized to be outstanding heating, cooling and air heating systems. On the other hand, they have not been used yet in the Turkish market. Greenhouses also have important economical potential in Turkey's agricultural sector. Greenhouses should be cooled during the summer or hot days. In order to establish optimum growth conditions in greenhouses, renewable energy sources should be utilized as much as possible. It is expected that effective use of underground air tunnels with a suitable technology in the modern greenhouses will play a leading role in Turkey in the foreseeable future. The exergy transports between the components and the destructions in each of the components of the system are determined for the average measured parameters obtained from the experimental results. Exergetic efficiencies of the system components are determined in an attempt to assess their individual performances and the potential for improvements is also presented. The daily maximum cooling coefficient of performances (COP) values for the system are also obtained to be 15.8. The total average COP in the experimental period is found to be 10.09. The system COP was calculated based on the amount of cooling produced by the air tunnel and the amount of power required to move the air through the tunnel, while the exergetic efficiency of the air tunnel is found to be in a range among 57.8-63.2%. The overall exergy efficiency value for the system on a product/fuel basis is found to be 60.7%. (author)

  17. Energetic, exergetic, economic and environmental evaluations of geothermal district heating systems: An application

    International Nuclear Information System (INIS)

    Keçebaş, Ali

    2013-01-01

    Highlights: ► Applying exergy, economic, environment and sustainability analyses to the GDHSs. ► Assessing energy and exergy efficiencies, economic and environmental impacts. ► Calculating the energy and exergy efficiencies of 34.86% and 48.78%, respectively. ► Proposing GDHSs as the most economic heating system. ► Providing a significant contribution towards reducing the emissions of air pollution. - Abstract: This study deals with an energetic and exergetic analysis as well as economic and environmental evaluations of Afyon geothermal district heating system (AGDHS) in Afyon, Turkey. In the analysis, actual system data are used to assess the district heating system performance, energy and exergy efficiencies, specific exergy index, exergetic improvement potential and exergy losses. And, for economic and environmental evaluations, actual data are obtained from the Technical Departments. The energy and exergy flow diagrams are clearly drawn to illustrate how much destructions/losses take place in addition to the inputs and outputs. For system performance analysis and improvement, both energy and exergy efficiencies of the overall AGDHS are determined to be 34.86% and 48.78%, respectively. The efficiency improvements in heat and power systems can help achieving energy security in an environmentally acceptable way by reducing the emissions that might otherwise occur. Present application has shown that in Turkey, geothermal energy is much cheaper than the other energy sources, like fossil fuels, and makes a significant contribution towards reducing the emissions of air pollution.

  18. A finite-volume model of a parabolic trough photovoltaic/thermal collector: Energetic and exergetic analyses

    International Nuclear Information System (INIS)

    Calise, Francesco; Palombo, Adolfo; Vanoli, Laura

    2012-01-01

    This paper presents a detailed finite-volume model of a concentrating photovoltaic/thermal (PVT) solar collector. The PVT solar collector consists in a parabolic trough concentrator and a linear triangular receiver. The bottom surfaces of the triangular receiver are equipped with triple-junction cells whereas the top surface is covered by an absorbing surface. The cooling fluid (water) flows inside a channel along the longitudinal direction of the PVT collector. The system was discretized along its axis and, for each slice of the discretized computational domain, mass and energy balances were considered. The model allows one to evaluate both thermodynamic and electrical parameters along the axis of the PVT collector. Then, for each slice of the computational domain, exergy balances were also considered in order to evaluate the corresponding exergy destruction rate and exergetic efficiency. Therefore, the model also calculates the magnitude of the irreversibilities inside the collector and it allows one to detect where these irreversibilities occur. A sensitivity analysis is also performed with the scope to evaluate the effect of the variation of the main design/environmental parameters on the energetic and exergetic performance of the PVT collector. -- Highlights: ► The paper investigates an innovative concentrating photovoltaic thermal solar collector. ► The collector is equipped with triple-junction photovoltaic layers. ► A local exergetic analysis is performed in order to detect sources of irreversibilities. ► Irreversibilities are mainly due to the heat transfer between sun and PVT collector.

  19. Exergetic comparison of food waste valorization in industrial bread production

    International Nuclear Information System (INIS)

    Zisopoulos, Filippos K.; Moejes, Sanne N.; Rossier-Miranda, Francisco J.; Goot, Atze Jan van der; Boom, Remko M.

    2015-01-01

    This study compares the thermodynamic performance of three industrial bread production chains: one that generates food waste, one that avoids food waste generation, and one that reworks food waste to produce new bread. The chemical exergy flows were found to be much larger than the physical exergy consumed in all the industrial bread chains studied. The par-baked brown bun production chain had the best thermodynamic performance because of the highest rational exergetic efficiency (71.2%), the lowest specific exergy losses (5.4 MJ/kg brown bun), and the almost lowest cumulative exergy losses (4768 MJ/1000 kg of dough processed). However, recycling of bread waste is also exergetically efficient when the total fermented surplus is utilizable. Clearly, preventing material losses (i.e. utilizing raw materials maximally) improves the exergetic efficiency of industrial bread chains. In addition, most of the physical (non-material related) exergy losses occurred at the baking, cooling and freezing steps. Consequently, any additional improvement in industrial bread production should focus on the design of thermodynamically efficient baking and cooling processes, and on the use of technologies throughout the chain that consume the lowest possible physical exergy. - Highlights: • Preventing material losses is the best way to enhance the exergetic efficiency. • Most of the physical exergy losses occur at the baking, cooling and freezing steps. • Par-baking “saves” chemical exergy but consumes an equal amount of physical exergy

  20. Advanced exergetic analysis of five natural gas liquefaction processes

    International Nuclear Information System (INIS)

    Vatani, Ali; Mehrpooya, Mehdi; Palizdar, Ali

    2014-01-01

    Highlights: • Advanced exergetic analysis was investigated for five LNG processes. • Avoidable/unavoidable and endogenous/exogenous irreversibilities were calculated. • Advanced exergetic analysis identifies the potentials for improving the system. - Abstract: Conventional exergy analysis cannot identify portion of inefficiencies which can be avoided. Also this analysis does not have ability to calculate a portion of exergy destruction which has been produced through performance of a component alone. In this study advanced exergetic analysis was performed for five mixed refrigerant LNG processes and four parts of irreversibility (avoidable/unavoidable) and (endogenous/exogenous) were calculated for the components with high inefficiencies. The results showed that portion of endogenous exergy destruction in the components is higher than the exogenous one. In fact interactions among the components do not affect the inefficiencies significantly. Also this analysis showed that structural optimization cannot be useful to decrease the overall process irreversibilities. In compressors high portion of the exergy destruction is related to the avoidable one, thus they have high potential to improve. But in multi stream heat exchangers and air coolers, unavoidable inefficiencies were higher than the other parts. Advanced exergetic analysis can identify the potentials and strategies to improve thermodynamic performance of energy intensive processes

  1. Designing an artificial neural network using radial basis function to model exergetic efficiency of nanofluids in mini double pipe heat exchanger

    Science.gov (United States)

    Ghasemi, Nahid; Aghayari, Reza; Maddah, Heydar

    2018-06-01

    The present study aims at predicting and optimizing exergetic efficiency of TiO2-Al2O3/water nanofluid at different Reynolds numbers, volume fractions and twisted ratios using Artificial Neural Networks (ANN) and experimental data. Central Composite Design (CCD) and cascade Radial Basis Function (RBF) were used to display the significant levels of the analyzed factors on the exergetic efficiency. The size of TiO2-Al2O3/water nanocomposite was 20-70 nm. The parameters of ANN model were adapted by a training algorithm of radial basis function (RBF) with a wide range of experimental data set. Total mean square error and correlation coefficient were used to evaluate the results which the best result was obtained from double layer perceptron neural network with 30 neurons in which total Mean Square Error(MSE) and correlation coefficient (R2) were equal to 0.002 and 0.999, respectively. This indicated successful prediction of the network. Moreover, the proposed equation for predicting exergetic efficiency was extremely successful. According to the optimal curves, the optimum designing parameters of double pipe heat exchanger with inner twisted tape and nanofluid under the constrains of exergetic efficiency 0.937 are found to be Reynolds number 2500, twisted ratio 2.5 and volume fraction( v/v%) 0.05.

  2. Methodology for the physical and chemical exergetic analysis of steam boilers

    International Nuclear Information System (INIS)

    Ohijeagbon, Idehai O.; Waheed, M. Adekojo; Jekayinfa, Simeon O.

    2013-01-01

    This paper presents a framework of thermodynamic, energy and exergy, analyses of industrial steam boilers. Mass, energy, and exergy analysis were used to develop a methodology for evaluating thermodynamic properties, energy and exergy input and output resources in industrial steam boilers. Determined methods make available an analytic procedure for the physical and chemical exergetic analysis of steam boilers for appropriate applications. The energy and exergy efficiencies obtained for the entire boiler was 69.56% and 38.57% at standard reference state temperature of 25 °C for an evaporation ratio of 12. Chemical exergy of the material streams was considered to offer a more comprehensive detail on energy and exergy resource allocation and losses of the processes in a steam boiler. - Highlights: ► We evaluated thermodynamic properties and performance variables associated with material streams. ► We analysed resources allocation, and magnitude of exergetic losses in steam boilers. ► Chemical exergy of material streams contributed to improved exergy values. ► High operational parameter will lead to higher boiler exergy. ► Exergy destroyed was higher in the combustion as against the heat exchanging unit

  3. Exergetic comparison of two KRW-based IGCC power plants

    International Nuclear Information System (INIS)

    Tsatsaronis, G.; Tawfik, T.; Lin, L.; Gallaspy, D.T.

    1991-01-01

    In studies supported by the U.S. Department of Energy and the Electric Power Research Institute, several design configurations of Kellogg-Rust-Westinghouse (KRW)-based Integrated Gasification-Combined-Cycle (IGCC) power plants were developed. Two of these configurations are compared in this paper, from the exergetic viewpoint. The exergetic comparison identifies the causes of performance differences between the two cases: differences in the exergy destruction of the gasification system, the gas turbine system, and the gas cooling process, as well as differences in the exergy loss accompanying the solids to disposal stream. The potential for using oxygen-blown versus air-blown KRW gasifiers, and hot gas versus cold gas cleanup processes is evaluated

  4. Exergetic analysis of autonomous power complex for drilling rig

    Science.gov (United States)

    Lebedev, V. A.; Karabuta, V. S.

    2017-10-01

    The article considers the issue of increasing the energy efficiency of power equipment of the drilling rig. At present diverse types of power plants are used in power supply systems. When designing and choosing a power plant, one of the main criteria is its energy efficiency. The main indicator in this case is the effective efficiency factor calculated by the method of thermal balances. In the article, it is suggested to use the exergy method to determine energy efficiency, which allows to perform estimations of the thermodynamic perfection degree of the system by the example of a gas turbine plant: relative estimation (exergetic efficiency factor) and an absolute estimation. An exergetic analysis of the gas turbine plant operating in a simple scheme was carried out using the program WaterSteamPro. Exergy losses in equipment elements are calculated.

  5. Support vector machine-based exergetic modelling of a DI diesel engine running on biodiesel–diesel blends containing expanded polystyrene

    International Nuclear Information System (INIS)

    Shamshirband, Shahaboddin; Tabatabaei, Meisam; Aghbashlo, Mortaza; Yee, Por Lip; Petković, Dalibor

    2016-01-01

    Highlights: • SVM-based thermodynamic modelling of a DI diesel engine working with diesel/biodiesel blends containing EPS. • Comparison of SVM-WT, SVM-FFA, SVM-RBF, SVM-QPSO, and ANN approaches for exergetic modelling of the engine. • Satisfactory performance of the SVM-WT for performance modelling of the engine over the other approaches. - Abstract: In the present study, four Support Vector Machine-based (SVM-based) approaches and the standard artificial neural network (ANN) model were designed and compared in modelling the exergetic parameters of a DI diesel engine running on diesel/biodiesel blends containing expanded polystyrene (EPS) wastes. For this aim, the SVM was coupled with discrete wavelet transform (SVM-WT), firefly algorithm (SVM-FFA), radial basis function (SVM-RBF) and quantum particle swarm optimization (SVM-QPSO). The exergetic data were computed using mass, energy, and exergy balance equations for the engine at different speeds and loads as well as various biodiesel and EPS wastes quantities. Three statistical indicators namely root means square error, coefficient of determination and Pearson coefficient were used to access the capability of the developed approaches for exergetic performance modelling of the DI diesel engine. The modelling results indicated that the SVM-WT approach was more efficient in exergetic modelling of the engine than the other three approaches. Moreover, the results obtained confirmed the effectiveness of the SVM-WT model in identifying the most exergy-efficient combustion conditions and the best fuel composition for achieving the most cost-effective and eco-friendly combustion process.

  6. Exergetic analysis of a biodiesel production process from Jatropha curcas

    International Nuclear Information System (INIS)

    Blanco-Marigorta, A.M.; Suárez-Medina, J.; Vera-Castellano, A.

    2013-01-01

    Highlights: ► Exergetic analysis of a biodiesel production process from Jatropha curcas. ► A 95% of the inefficiencies are located in the transesterification reactor. ► Exergetic efficiency of the steam generator amounts 37.6%. ► Chemical reactions cause most of the irreversibilities of the process. ► Exergetic efficiency of the overall process is over 63%. -- Abstract: As fossil fuels are depleting day by day, it is necessary to find an alternative fuel to fulfill the energy demand of the world. Biodiesel is considered as an environmentally friendly renewable diesel fuel alternative. The interest in using Jatropha curcas as a feedstock for the production of biodiesel is rapidly growing. On the one hand, J. curcas’ oil does not compete with the food sector due to its toxic nature and to the fact that it must be cultivated in marginal/poor soil. On the other, its price is low and stable. In the last decade, the investigation on biodiesel production was centered on the choice of the suitable raw material and on the optimization of the process operation conditions. Nowadays, research is focused on the improvement of the energetic performance and on diminishing the inefficiencies in the different process components. The method of exergy analysis is well suited for furthering this goal, for it is a powerful tool for developing, evaluating and improving an energy conversion system. In this work, we identify the location, magnitude and sources of thermodynamic inefficiencies in a biodiesel production process from J. curcas by means of an exergy analysis. The thermodynamic properties were calculated from existing databases or estimated when necessary. The higher exergy destruction takes places in the transesterification reactor due to chemical reactions. Almost 95% of the exergy of the fuel is destroyed in this reactor. The exergetic efficiency of the overall process is 63%.

  7. Exergetic and environmental analysis of a pulverized coal power plant

    International Nuclear Information System (INIS)

    Restrepo, Álvaro; Miyake, Raphael; Kleveston, Fábio; Bazzo, Edson

    2012-01-01

    This paper presents the results of exergetic and environmental analysis of a typical pulverized coal power plant located in Brazil. The goal was to quantify both the exergy destruction and the environmental impact associated with a thermal power plant. The problem boundary consists of the entire coal delivery route, including mining and beneficiation, transport, pre-burning processes and the power plant. The used data were obtained mainly from field measurements taken in all system processes, from mining to the power plant. The study focused only on the operation period. Previous works have shown that the construction and decommissioning periods contribute less than 1% of the environmental impact. The exergetic analysis was based on the second law of thermodynamics while the environmental analysis was based on life cycle assessment (LCA) using SimaPro 7.2, focussing on the climate change and acidification impact categories. The CO 2 -eq emission was 1300 kg per MWh. The highest degree of environmental impact occurred during the combustion process. The exergetic and environmental analysis provides a tool to evaluate irreversibilities and the environmental impact, identifying the most significant stages and equipment of the entire power generation process. -- Highlights: ► Exergetic and environmental analysis of a typical Brazilian PC power plant. ► Environmental impact associated with the mining, transport and thermal power plant. ► Life cycle assessment used for environmental analysis. ► Acidification impact category evaluated using Eco-indicator 99. ► Climate change impact evaluation using (Global Warming Potential) GWP 100a.

  8. COMPARATIVE ANALYSIS OF EXERGETIC BALANCE METHODS IN ALCOHOLIC DISTILLATION COLUMNS

    Directory of Open Access Journals (Sweden)

    Arletis Cruz Llerena

    2017-04-01

    Full Text Available The comparison between three methods to calculate the exergy of the currents involved in the exergetic balance of alcoholic distillation columns is presented. Exergy of the currents was considered as: 1 flow exergies, 2 heat exergies and 3 the sum of flow exergy and chemical exergy. The implementation of the exergetic analysis was examined as a key point to improve the efficiency of the process. A case study, where the methods are applied for the evaluation of the exergy is analyzed; differences among the methods were obtained between the 15% and 30 %. The influence of the studied columns in total work capacity loss was determined, concluding that regardless of the method, the distillation column has shown the higher loss. An economic analysis was made applying the first method to the case study, where the percentage of ethanol in wine increases from 5.8 ºGL to 9 ºGL, which led to a decrease of vapor consumption of 23.66%, an exergetic yield increase of 28.02 % and a combustion gas flow reduction of 24 627 034.4 m3/year.

  9. Determination of optimum insulation thickness in pipe for exergetic life cycle assessment

    International Nuclear Information System (INIS)

    Keçebaş, Ali

    2015-01-01

    Highlights: • It is aimed to determine optimum insulation thickness in pipe. • A new methodology is used as exergetic life cycle assessment for this purpose. • It is evaluated for various fuels, different pipe diameters and some combustion parameters. • This methodology is not suitable for determining optimum insulation thickness of a pipe. • There are benefits to our understanding of the need for insulation use in pipes. - Abstract: The energy saving and the environmental impacts’ reduction in the world building sector have gained great importance. Therefore, great efforts have been invested to create energy-saving green buildings. To do so, one of the many things to be done is the insulation of cylindrical pipes, canals and tanks. In the current study, the main focus is on the determination of the optimum insulation thickness of the pipes with varying diameters when different fuels are used. Therefore, through a new method combining exergy analysis and life cycle assessment, optimum insulation thickness of the pipes, total exergetic environmental impact, net saving and payback period were calculated. The effects of the insulation thickness on environmental and combustion parameters were analyzed in a detailed manner. The results revealed that optimum insulation thickness was affected by the temperature of the fuel when it enters into the combustion chamber, the temperature of the stack gas and the temperature of the combustion chamber. Under these optimum effects, the optimum insulation thickness of a 100 mm pipe was determined to be 55.7 cm, 57.2 cm and 59.3 cm for coal, natural gas and fuel–oil, respectively with the ratios of 76.32%, 81.84% and 84.04% net savings in the exergetic environmental impact. As the environmental impacts of the fuels and their products are bigger than those of the insulation material, the values of the optimum insulation thickness of the method used this study was found greater. Moreover, in the pipes with greater

  10. Energetic and exergetic analysis of a steam turbine power plant in an existing phosphoric acid factory

    International Nuclear Information System (INIS)

    Hafdhi, Fathia; Khir, Tahar; Ben Yahyia, Ali; Ben Brahim, Ammar

    2015-01-01

    Highlights: • The operating mode of the factory and the power supply streams are presented. • Energetic Analysis of steam turbine power plant of an existing phosphoric acid factory. • Exergetic Analysis of each component of steam turbine power plant and the different heat recovery system. • Energy, exergy efficiency and irreversibility rates for the main components are determined. • The effect of the operating parameters on the plant performance are analyzed. - Abstract: An energetic and exergetic analysis is conducted on a Steam Turbine Power Plant of an existing Phosphoric Acid Factory. The heat recovery systems used in the different parts of the plant are also considered in the study. Mass, energy and exergy balances are established on the main compounds of the plant. A numerical code is established using EES software to perform the calculations required for the thermal and exergy plant analysis considering real variation ranges of the main operating parameters such as pressure, temperature and mass flow rate. The effects of theses parameters on the system performances are investigated. The main sources of irreversibility are the melters, followed by the heat exchangers, the steam turbine generator and the pumps. The maximum energy efficiency is obtained for the blower followed by the heat exchangers, the deaerator and the steam turbine generator. The exergy efficiency obtained for the heat exchanger, the steam turbine generator, the deaerator and the blower are 88%, 74%, 72% and 66% respectively. The effects of High Pressure steam temperature and pressure on the steam turbine generator energy and exergy efficiencies are investigated.

  11. Energetic and exergetic efficiencies of coal-fired CHP (combined heat and power) plants used in district heating systems of China

    International Nuclear Information System (INIS)

    Liao, Chunhui; Ertesvåg, Ivar S.; Zhao, Jianing

    2013-01-01

    The efficiencies of coal-fired CHP (combined heat and power) plants used in the district heating systems of China were analyzed with a thermodynamic model in the Hysys program. The influences of four parameters were evaluated by the Taguchi method. The results indicated that the extraction steam flow rate and extraction steam pressure are the most important parameters for energetic and exergetic efficiencies, respectively. The relations between extraction steam flow rate, extraction steam pressure and the energetic and exergetic efficiencies were investigated. The energetic and exergetic efficiencies were compared to the RPES (relative primary energy savings) and the RAI (relative avoided irreversibility). Compared to SHP (separate heat and power) generation, the CHP systems save fuel energy when extraction ratio is larger than 0.15. In the analysis of RAI, the minimum extraction ratio at which CHP system has advantages compared with SHP varies between 0.25 and 0.6. The higher extraction pressure corresponds to a higher value. Two of the examined plants had design conditions giving RPES close to zero and negative RAI. The third had both positive RPES and RAI at design conditions. The minimum extraction ratio can be used as an indicator to design or choose CHP plant for a given district heating system. - Highlights: • Extraction flow rate and extraction pressure are the most important parameters. • The exergetic efficiency depends on the energy to exergy ratio and system boundary. • The minimum extraction ratio is a key indicator for CHP plants. • Program Hysys and Taguchi method are used in this research

  12. Exergetic evaluation on photovoltaic/thermal hybrid panel; Taiyoko netsu hybrid panel no exergy hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Iwaki, H; Morita, Y; Fujisawa, T; Tani, T [Science University of Tokyo, Tokyo (Japan)

    1996-10-27

    The photovoltaic/thermal hybrid panel (PV/T) is an energy converter that was designed for the composite use of electricity and heat. In this paper, the validity of PV/T designed for trial was evaluated based on an exergetic theory. As the result of an experiment, the electric exergetic value of PV/T and PV is each 65.8 kWh/m{sup 2} and 58.6 kWh/m{sup 2}. The former is higher than the latter by 11.2%. The total exergetic value of PV/T is also 1.2 and 8.2 times as high as those of a PV and solar collector (SC), respectively. The calculation result of the optimum temperature operation showed that the exergetic value of PV/T is 3.1 times as high as the electric exergetic value. Therefore, the operation must be performed with the electric and thermal exergetic values set in a ratio of 3.1 to 1. In this paper, the operating mode is handled in which importance was more attached to the electric exergy than the thermal exergy. The flow rate of a heating medium on PV/T is not thus the flow control that maximizes the PV/T exergy. In the future, studies including these points will be promoted. 7 refs., 7 figs., 3 tabs.

  13. Thermal and Exergetic Analysis of a Solar Still

    International Nuclear Information System (INIS)

    Chávez, S; Terres, H; Lizardi, A; López, R; Lara, A

    2017-01-01

    In this work an energy and exergy analysis of solar distillation process is presented. The analysis is based on the experimental observation of the simple basin type solar stills for 4 different initial volumes (5.5, 6.5, 7.5 and 8.5 L). Energy and exergy balance equations have been written for all components of the solar still including glass cover, brine and absorber plate. The thermodynamic models for the energy and exergy analysis are presented on the critical heat transfer correlations in literatures for the simple basin type solar still. The results show that maximum values are reached in the energy efficiency of 45.6, 41.5, 35.7 and 31.8%, however exergetic efficiency for maximum values are 7.5, 7.2, 7 and 5.4%, corresponding to volumes 5.5, 6.5, 7.5 and 8.5 L respectively. (paper)

  14. Energetic and exergetic aspects of cotton stalk production in establishing energy policies

    International Nuclear Information System (INIS)

    Hepbasli, Arif; Utlu, Zafer; Akdeniz, R. Cengiz

    2007-01-01

    Exergy analysis is important for energy resource utilization, because exergy, which is a way to a sustainable future, is a part of the energy analysis. Exergy analysis starts to play a role in several countries in developing energy policy. This paper deals with the exergetic assessment of the cotton stalk (CS) production. In this regard, Turkey, which is one of the eight countries producing 85% of the world's cotton, is given as an application country first. Energy and exergy relations used in the analysis are then presented. Finally, the Turkish CS production in 2003 is evaluated using energy and exergy analyses method, while the results obtained are discussed. The values for the net energy and exergy gained are obtained to be about 49,146 and 59,395 MJ/ha, respectively. Turkey's total energy and exergy are estimated to be 75.45 and 81.87 PJ. It may be concluded that this amount of energy is equal to 7.77% and 2.38% of Turkey's primary energy production and consumption in the same year, respectively. The overall mean energy and exergy efficiencies of the cotton production in the year studied are found to be 33.06% and 33.12%, respectively. It is also expected that the results of this study will be helpful in developing highly applicable and productive planning for energy policies

  15. Relation between parameters of self-sustaining magnetically confined electron cloud and external conditions

    International Nuclear Information System (INIS)

    Yu Qingchang

    1991-01-01

    On the basis of the fluid theory of the axisymmetrical self-sustaining magnetically confined electron clouds an approximate analytical method is developed. By means of this method the relations between the parameters of this type of electron cloud and external conditions are studied. The parameters include electron density, electron temperature, drift angular frequency of electrons, radius of the electron cloud and electric potential at the centre of the electron cloud. They depend on the voltage, magnetic induction, pressure, electromagnetic field distribution in the confinement device and parameters of electron-atom collisions

  16. Thrust Performance Evaluation of a Turbofan Engine Based on Exergetic Approach and Thrust Management in Aircraft

    Science.gov (United States)

    Yalcin, Enver

    2017-05-01

    The environmental parameters such as temperature and air pressure which are changing depending on altitudes are effective on thrust and fuel consumption of aircraft engines. In flights with long routes, thrust management function in airplane information system has a structure that ensures altitude and performance management. This study focused on thrust changes throughout all flight were examined by taking into consideration their energy and exergy performances for fuel consumption of an aircraft engine used in flight with long route were taken as reference. The energetic and exergetic performance evaluations were made under the various altitude conditions. The thrust changes for different altitude conditions were obtained to be at 86.53 % in descending direction and at 142.58 % in ascending direction while the energy and exergy efficiency changes for the referenced engine were found to be at 80.77 % and 84.45 %, respectively. The results revealed here can be helpful to manage thrust and reduce fuel consumption, but engine performance will be in accordance with operation requirements.

  17. Exergetic optimization of shell and tube heat exchangers using a genetic based algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Oezcelik, Yavuz [Ege University, Bornova, Izmir (Turkey). Engineering Faculty, Chemical Engineering Department

    2007-08-15

    In the computer-based optimization, many thousands of alternative shell and tube heat exchangers may be examined by varying the high number of exchanger parameters such as tube length, tube outer diameter, pitch size, layout angle, baffle space ratio, number of tube side passes. In the present study, a genetic based algorithm was developed, programmed, and applied to estimate the optimum values of discrete and continuous variables of the MINLP (mixed integer nonlinear programming) test problems. The results of the test problems show that the genetic based algorithm programmed can estimate the acceptable values of continuous variables and optimum values of integer variables. Finally the genetic based algorithm was extended to make parametric studies and to find optimum configuration of heat exchangers by minimizing the sum of the annual capital cost and exergetic cost of the shell and tube heat exchangers. The results of the example problems show that the proposed algorithm is applicable to find optimum and near optimum alternatives of the shell and tube heat exchanger configurations. (author)

  18. Energetic and exergetic analysis of a new compact trigeneration system run with liquefied petroleum gas

    International Nuclear Information System (INIS)

    Proenza Pérez, Nestor; Titosse Sadamitsu, Marlene; Luz Silveira, Jose; Santana Antunes, Julio; Eduardo Tuna, Celso; Erazo Valle, Atilio; Faria Silva, Natalia

    2015-01-01

    In this study, the first and second laws of thermodynamics are used to analyze the quantity and quality of energy in a small compact trigeneration system. This combined cycle is composed of a little reciprocating ICE model GM, 1.0 CORSA (internal combustion engine), using LPG (liquefied petroleum gas) as fuel, HE1 and HE2 (two heat exchangers) and an AM (absorption machine) using ammonia–water as working fluid mixture. The mass and energy balance equations of the engine and subsystems are reviewed in detail. Exergy of each involved stream is calculated and the exergetic balance of each subsystem is presented, as well as the global system, identifying where and why losses and irreversibilities occurs. Efficiencies based on the second law of thermodynamics are calculated for each subsystem and compared. Special attention is given to identification and quantification of second law efficiencies and the irreversibilities of various processes and subsystems. The determination of the irreversibilities in each subsystem is particularly important since they are not identified in traditional first law analysis. Furthermore, this study revealed that the combustion was the most important contributor to the system inefficiency representing 36.0% of the total exergy input and 73% of the total exergy destruction. The exergetic efficiency of the trigeneration system is determined to be 51.19%. - Highlights: • The energetic and exergetic performance of trigeneration system was studied. • The engine is the main exergetic destruction equipment. • The exergetic efficiency of the trigeneration system was 51.19%.

  19. Comprehensive exergetic and economic comparison of PWR and hybrid fossil fuel-PWR power plants

    International Nuclear Information System (INIS)

    Sayyaadi, Hoseyn; Sabzaligol, Tooraj

    2010-01-01

    A typical 1000 MW Pressurized Water Reactor (PWR) nuclear power plant and two similar hybrid 1000 MW PWR plants operate with natural gas and coal fired fossil fuel superheater-economizers (Hybrid PWR-Fossil fuel plants) are compared exergetically and economically. Comparison is performed based on energetic and economic features of three systems. In order to compare system at their optimum operating point, three workable base case systems including the conventional PWR, and gas and coal fired hybrid PWR-Fossil fuel power plants considered and optimized in exergetic and exergoeconomic optimization scenarios, separately. The thermodynamic modeling of three systems is performed based on energy and exergy analyses, while an economic model is developed according to the exergoeconomic analysis and Total Revenue Requirement (TRR) method. The objective functions based on exergetic and exergoeconomic analyses are developed. The exergetic and exergoeconomic optimizations are performed using the Genetic Algorithm (GA). Energetic and economic features of exergetic and exergoeconomic optimized conventional PWR and gas and coal fired Hybrid PWR-Fossil fuel power plants are compared and discussed comprehensively.

  20. Hierarchically structured exergetic and exergoeconomic analysis and evaluation of energy conversion processes

    International Nuclear Information System (INIS)

    Hebecker, Dietrich; Bittrich, Petra; Riedl, Karsten

    2005-01-01

    Evaluation of the efficiency and economic benefit of energy conversion processes and technologies requires a scientifically based analysis. The hierarchically structured exergetic analysis provides a detailed characterization of complex technical systems. By defining corresponding evaluation coefficients, the exergetic efficiency can be assessed for units within the whole system. Based on this exergetic analysis, a thermoeconomic evaluation method is developed. A cost function is defined for all units, subsystems and the total plant, so that the cost flow in the system can be calculated. Three dimensionless coefficients, the Pauer factor, the loss coefficient and the cost factor, enable pinpointing cost intensive process units, allocating cost in cases of co-production and gaining insight for future design improvements. The methodology is demonstrated by a biomass gasification plant producing electricity, heat and cold

  1. Sustainable development induction in organizations: a convergence analysis of ISO standards management tools' parameters.

    Science.gov (United States)

    Merlin, Fabrício Kurman; Pereira, Vera Lúciaduarte do Valle; Pacheco, Waldemar

    2012-01-01

    Organizations are part of an environment in which they are pressured to meet society's demands and acting in a sustainable way. In an attempt to meet such demands, organizations make use of various management tools, among which, ISO standards are used. Although there are evidences of contributions provided by these standards, it is questionable whether its parameters converge for a possible induction for sustainable development in organizations. This work presents a theoretical study, designed on structuralism world view, descriptive and deductive method, which aims to analyze the convergence of management tools' parameters in ISO standards. In order to support the analysis, a generic framework for possible convergence was developed, based on systems approach, linking five ISO standards (ISO 9001, ISO 14001, OHSAS 18001, ISO 31000 and ISO 26000) with sustainable development and positioning them according to organization levels (strategic, tactical and operational). The structure was designed based on Brundtland report concept. The analysis was performed exploring the generic framework for possible convergence based on Nadler and Tushman model. The results found the standards can contribute to a possible sustainable development induction in organizations, as long as they meet certain minimum conditions related to its strategic alignment.

  2. Cathode fall parameters of a self-sustained normal glow discharge in atmospheric-pressure helium

    International Nuclear Information System (INIS)

    Arkhipenko, V.I.; Zgirovskii, S.M.; Kirillov, A.A.; Simonchik, L.V.

    2002-01-01

    Results from comprehensive studies of a high-current self-sustained glow discharge in atmospheric-pressure helium are presented. The main parameters of the cathode fall, namely, the electric field profile, cathode fall thickness, current density, gas temperature, and heat flux to the cathode are determined. The results obtained are discussed using one-dimensional models of the cathode fall with allowance for volumetric heat release

  3. Exergetic, technological and economic study for transport of nuclear fuel energy to distant consumers

    International Nuclear Information System (INIS)

    Pozdeev, V.V.; Dobrovol'skij, S.P.; Shiryaev, V.K.

    1989-01-01

    Seven versions of energy transport from HTGR base power source are considered. Energy trasnport using electricity is taken as the main variant. The most promising among considered systems is the variant with steam conversion of methane, which can be used for three methods of energy transport: by converted gas, hydrogen and carbon monoxide. Exergetic method of analysis was used to compare different products, used by heat and electric showed that exergetic and economic efficiency of HTGR energy transport by hydrogen appeared to be the highest. Besides this, absolute ecologic purity is provided

  4. Sustainability.

    Science.gov (United States)

    Chang, Chein-Chi; DiGiovanni, Kimberly; Mei, Ying; Wei, Li

    2016-10-01

    This review on Sustainability covers selected 2015 publications on the focus of Sustainability. It is divided into the following sections : • Sustainable water and wastewater utilities • Sustainable water resources management • Stormwater and green infrastructure • Sustainability in wastewater treatment • Life cycle assessment (LCA) applications • Sustainability and energy in wastewater industry, • Sustainability and asset management.

  5. Energetic and exergetic performance analysis of CdS/CdTe based photovoltaic technology in real operating conditions of composite climate

    International Nuclear Information System (INIS)

    Rawat, Rahul; Kaushik, S.C.; Sastry, O.S.; Singh, Y.K.; Bora, B.

    2016-01-01

    Highlights: • Performance analysis of 3.2 kW_P CdTe PV system has been carried out. • Performance ratio and thermodynamic efficiencies have been determined. • Electrical parameters have been assessed at alternative reporting conditions. • Exergy analysis of the system has been carried out. • Degradation rate of the system has been calculated to be 0.18%/year. - Abstract: The solar photovoltaic (PV) technology market has increased rapidly with the continuously increasing electricity demand and climate concerns. With the increased PV installed capacity, the performance analysis of these systems has become critically important in order to ensure its reliable operation for a long lifetime, monetary payback and to identify the scope of improvement. The well-established conventional energetic performance analysis techniques are quantitative approaches based on energy conservation while the exergetic performance analysis is the qualitative method which is based on second law of thermodynamics. In this paper, an approach for energetic and exergetic performance analysis has been developed so as to determine the long term performance of PV systems in real operating conditions. A methodology has been proposed for utilizing the long term time series outdoor data in order to assess the performance of PV system statistically and to determine the system degradation rate. The degradation rate of 3.2 kW_P CdTe PV system is found to be 0.18% per year after 23 months of operation in composite climate which is lower than the reported degradation rate of earlier CdTe technology. The average performance ratio (PR), energetic and exergetic efficiency of the system is found to be 0.89%, 9.84% and 10.62% respectively. The average exergetic efficiency is found to be increased by 12% by utilizing the recoverable thermal exergy loss in photovoltaic-thermal system. The instantaneous PR of 93.5% of the per minute data is found to be in the range of 0.84–0.95. Additionally, the

  6. The value of the exergetic life cycle assessment besides the LCA

    NARCIS (Netherlands)

    Cornelissen, Rene; Hirs, Gerard

    2002-01-01

    In this paper the value of the exergetic life cycle assessment (ELCA) has been analysed. The ELCA uses the framework of the life cycle assessment (LCA) and can be seen as the exergy analysis of a complete life cycle. The value of the ELCA besides the LCA has been discussed. It is shown that the ELCA

  7. Exergetical analysis of combustion, heat transfers, thermodynamical cycles and their applications

    International Nuclear Information System (INIS)

    Buchet, E.

    1983-11-01

    Exergetic analysis allowed to show up and evaluate irreversibilities in combustion, vapor exchanges and thermodynamic cycles, and also to justify processes often used to improve yields of thermal and energetic plants, and among them some more and more complex in cogeneration plants. This analysic method has been applied to thermal or nuclear steam power plant, to gas turbines and to cogeneration [fr

  8. Comparing the sustainability parameters of renewable, nuclear and fossil fuel electricity generation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Annette; Strezov, Vladimir; Evans, Tim

    2010-09-15

    The sustainability parameters of electricity generation have been assessed by the application of eight key indicators. Photovoltaics, wind, hydro, geothermal, biomass, natural gas, coal and nuclear power have been assessed according to their price, greenhouse gas emissions, efficiency, land use, water use, availability, limitations and social impacts on a per kilowatt hour basis. The relevance of this information to the Australian context is discussed. Also included are the results of a survey on Australian opinions regarding electricity generation, which found that Australian prefer solar electricity above any other method, however coal, biomass and nuclear power have low acceptance.

  9. Exergetic life cycle assessment of hydrogen production from renewables

    Science.gov (United States)

    Granovskii, Mikhail; Dincer, Ibrahim; Rosen, Marc A.

    Life cycle assessment is extended to exergetic life cycle assessment and used to evaluate the exergy efficiency, economic effectiveness and environmental impact of producing hydrogen using wind and solar energy in place of fossil fuels. The product hydrogen is considered a fuel for fuel cell vehicles and a substitute for gasoline. Fossil fuel technologies for producing hydrogen from natural gas and gasoline from crude oil are contrasted with options using renewable energy. Exergy efficiencies and greenhouse gas and air pollution emissions are evaluated for all process steps, including crude oil and natural gas pipeline transportation, crude oil distillation and natural gas reforming, wind and solar electricity generation, hydrogen production through water electrolysis, and gasoline and hydrogen distribution and utilization. The use of wind power to produce hydrogen via electrolysis, and its application in a fuel cell vehicle, exhibits the lowest fossil and mineral resource consumption rate. However, the economic attractiveness, as measured by a "capital investment effectiveness factor," of renewable technologies depends significantly on the ratio of costs for hydrogen and natural gas. At the present cost ratio of about 2 (per unit of lower heating value or exergy), capital investments are about five times lower to produce hydrogen via natural gas rather than wind energy. As a consequence, the cost of wind- and solar-based electricity and hydrogen is substantially higher than that of natural gas. The implementation of a hydrogen fuel cell instead of an internal combustion engine permits, theoretically, an increase in a vehicle's engine efficiency of about of two times. Depending on the ratio in engine efficiencies, the substitution of gasoline with "renewable" hydrogen leads to (a) greenhouse gas (GHG) emissions reductions of 12-23 times for hydrogen from wind and 5-8 times for hydrogen from solar energy, and (b) air pollution (AP) emissions reductions of 38

  10. Sustainability Metrics of a Small Scale Turbojet Engine

    Science.gov (United States)

    Ekici, Selcuk; Sohret, Yasin; Coban, Kahraman; Altuntas, Onder; Karakoc, T. Hikmet

    2018-05-01

    Over the last decade, sustainable energy consumption has attracted the attention of scientists and researchers. The current paper presents sustainability indicators of a small scale turbojet engine, operated on micro-aerial vehicles, for discussion of the sustainable development of the aviation industry from a different perspective. Experimental data was obtained from an engine at full power load and utilized to conduct an exergy-based sustainability analysis. Exergy efficiency, waste exergy ratio, recoverable exergy ratio, environmental effect factor, exergy destruction factor and exergetic sustainability index are evaluated as exergetic sustainability indicators of the turbojet engine under investigation in the current study. The exergy efficiency of the small scale turbojet engine is calculated as 27.25 % whereas the waste exergy ratio, the exergy destruction factor and the sustainability index of the engine are found to be 0.9756, 0.5466 and 0.2793, respectively.

  11. Effects of discharge parameters on the micro-hollow cathode sustained glow discharge

    Science.gov (United States)

    Shoujie, HE; Peng, WANG; Jing, HA; Baoming, ZHANG; Zhao, ZHANG; Qing, LI

    2018-05-01

    The effects of parameters such as pressure, first anode radius, and the cavity diameter on the micro-hollow cathode sustained glow discharge are investigated by using a two-dimensional self-consistent fluid model in pure argon. The results indicate that the three parameters influence the discharge in the regions inside and outside of the cavity. Under a fixed voltage on each electrode, a larger volume of high density plasma can be produced in the region between the first and the second anodes by selecting the appropriate pressure, the higher first anode, and the appropriate cavity diameter. As the pressure increases, the electron density inside the hollow cathode, the high density plasma volume between the first anode and second anodes, and the radial electric field in the cathode cavity initially increase and subsequently decrease. As the cavity diameter increases, the high-density plasma volume between the first and second anodes initially increases and subsequently decreases; whereas the electron density inside the hollow cathode decreases. As the first anode radius increases, the electron density increases both inside and outside of the cavity. Moreover, the increase of the electron density is more obvious in the microcathode sustained region than in the micro cavity region. The results reveal that the discharge inside the cavity interacts with that outside the cavity. The strong hollow cathode effect and the high-density plasma inside the cavity favor the formation of a sustained discharge between the first anode and the second anodes. Results also show that the radial boundary conditions exert a considerably weaker influence on the discharge except for a little change in the region close to the radial boundary.

  12. Effect of parameter mismatch on the dynamics of strongly coupled self sustained oscillators.

    Science.gov (United States)

    Chakrabarty, Nilaj; Jain, Aditya; Lal, Nijil; Das Gupta, Kantimay; Parmananda, Punit

    2017-01-01

    In this paper, we present an experimental setup and an associated mathematical model to study the synchronization of two self-sustained, strongly coupled, mechanical oscillators (metronomes). The effects of a small detuning in the internal parameters, namely, damping and frequency, have been studied. Our experimental system is a pair of spring wound mechanical metronomes; coupled by placing them on a common base, free to move along a horizontal direction. We designed a photodiode array based non-contact, non-magnetic position detection system driven by a microcontroller to record the instantaneous angular displacement of each oscillator and the small linear displacement of the base, coupling the two. In our system, the mass of the oscillating pendula forms a significant fraction of the total mass of the system, leading to strong coupling of the oscillators. We modified the internal mechanism of the spring-wound "clockwork" slightly, such that the natural frequency and the internal damping could be independently tuned. Stable synchronized and anti-synchronized states were observed as the difference in the parameters was varied in the experiments. The simulation results showed a rapid increase in the phase difference between the two oscillators beyond a certain threshold of parameter mismatch. Our simple model of the escapement mechanism did not reproduce a complete 180° out of phase state. However, the numerical simulations show that increased mismatch in parameters leads to a synchronized state with a large phase difference.

  13. Exergetic comparison of two different cooling technologies for the power cycle of a thermal power plant

    International Nuclear Information System (INIS)

    Blanco-Marigorta, Ana M.; Victoria Sanchez-Henriquez, M.; Pena-Quintana, Juan A.

    2011-01-01

    Exergetic analysis is without any doubt a powerful tool for developing, evaluating and improving an energy conversion system. In the present paper, two different cooling technologies for the power cycle of a 50 MWe solar thermal power plant are compared from the exergetic viewpoint. The Rankine cycle design is a conventional, single reheat design with five closed and one open extraction feedwater heaters. The software package GateCycle is used for the thermodynamic simulation of the Rankine cycle model. The first design configuration uses a cooling tower while the second configuration uses an air cooled condenser. With this exergy analysis we identify the location, magnitude and the sources or thermodynamic inefficiencies in this thermal system. This information is very useful for improving the overall efficiency of the power system and for comparing the performance of both technologies.

  14. Energetic and exergetic analysis of steam production for the extraction of coniferous essential oils

    International Nuclear Information System (INIS)

    Friso, Dario; Grigolato, Stefano; Cavalli, Raffaele

    2011-01-01

    Bioenergy production is optimal when the energy production process is both efficient and benefits from local resources. Energetic and exergetic analyses are applied to highlight efficiency differences between small-size systems that are based on the co-generation of heating and power (CHP) versus the co-generation of heating and power with steam production (CHP-S). Both systems use the Organic fluid Rankine Cycle (ORC). The recovery of heat from flue gases is considered to be a way of increasing energy efficiency. In the CHP-S case, steam (at low pressure) is used to extract essential oils from fresh twigs and needles of coniferous trees throughout a steam distillation process. When the systems work at a thermal combustion power of 1350 kW, energetic analysis shows that the energy efficiency of the CHP-S plant (89.4%) is higher than that of the CHP plant (77.9%). Exergetic analysis shows that the efficiency of the CHP-S plant is 2.2% higher than that of the CHP plant. -- Highlights: → Bioenergy production is optimal when the energy production process is efficient. → Energetic and exergetic analyses are applied to highlight efficiency differences between the co-generation of heating and power (CHP) versus the co-generation of heating and power with steam production (CHP-S). → The recovery of heat from flue gases is a way of increasing energy efficiency. → The energetic and exergetic analysis shows that the efficiency of the CHP-S plant is higher than that of the CHP plant.

  15. Energetic and Exergetic Analysis of Low and Medium Temperature District Heating Network Integration

    DEFF Research Database (Denmark)

    Li, Hongwei; Svendsen, Svend

    In this paper, energetic and exergetic approaches were applied to an exemplary low temperature district heating (LTDH) network with supply/return water temperature at 55oC/25 oC. The small LTDH network is annexed to a large medium temperature district heating (MTDH) network. The LTDH network can ...... will reduce the amount of water supply from the MTDH network and improve the system energy conversion efficiency. Through the simulation, the system energetic and exergetic efficiencies based on the two network integration approaches were calculated and evaluated.......In this paper, energetic and exergetic approaches were applied to an exemplary low temperature district heating (LTDH) network with supply/return water temperature at 55oC/25 oC. The small LTDH network is annexed to a large medium temperature district heating (MTDH) network. The LTDH network can...... be supplied through upgrading the return water from the MTDH network with a small centralized heat pump. Alternatively, the supply and return water from the MTDH network can be mixed with a shunt at the junction point to supply the LTDH network. Comparing with the second approach, the heat pump system...

  16. Comparison of demographic, clinical, and laboratory parameters between patients with sustained normotension, white coat hypertension, masked hypertension, and sustained hypertension.

    Science.gov (United States)

    Afsar, Baris

    2013-03-01

    After measurement of office blood pressure (BP) and ambulatory BP monitoring (ABPM), 4 groups of patients were identified namely: (i) sustained normotensive patients (BPs are normal both clinically and by ABPM); (ii) white coat hypertensive patients (clinical BP were above limits, but ABPM were normal); (iii) masked hypertensive patients (clinical BP were normal, but ABPM were high); (iv) sustained hypertensive patients (both office and ABPM were high). The exact pathophysiologic mechanisms of these conditions are not exactly known. Besides in the literature there are only few studies that compare the 4 groups of patients together. Thus the study was carried out to compare patients with sustained normotension (SNT), white coat hypertension (WCHT), masked hypertension (MHT), and sustained hypertension (SHT). All patients underwent history taking, physical examination, laboratory analysis, and ABPM. They were referred to the cardiology department for echocardiographic evaluation. In total 85 patients with SNT, 112 patients with WCHT, 31 patients with MHT, and 81 patients with SHT were included. Going from SNT to SHT, body mass index (p<0.0001), waist circumference (p<0.0001), fasting blood glucose (p=0.002), and uric acid (p=0.029) rose progressively. Presence of metabolic syndrome was also highest in SHT and lowest in SNT (p<0.0001). Most of the metabolic risk factors were higher in patients with MHT and SHT when compared to SNT and WCHT. Studies are needed to determine whether metabolic risk factors play a causative role for the development of MHT and SHT. Copyright © 2012 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

  17. Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria

    International Nuclear Information System (INIS)

    Ust, Yasin; Arslan, Feyyaz; Ozsari, Ibrahim; Cakir, Mehmet

    2015-01-01

    Miller cycle engines are one of the popular engine concepts that are available for improving performance, reducing fuel consumption and NO x emissions. There are many research studies that investigated the modification of existing conventional engines for operation on a Miller cycle. In this context, a comparative performance analysis and optimization based on exergetic performance criterion, total exergy output and exergy efficiency has been carried out for an irreversible Dual–Miller Cycle cogeneration system having finite-rate of heat transfer, heat leak and internal irreversibilities. The EPC (Exergetic Performance Coefficient) criterion defined as the ratio of total exergy output to the loss rate of availability. Performance analysis has been also extended to the Otto–Miller and Diesel-Miller cogeneration cycles which may be considered as two special cases of the Dual–Miller cycle. The effect of the design parameters such as compression ratio, pressure ratio, cut-off ratio, Miller cycle ratio, heat consumer temperature ratio, allocation ratio and the ratio of power to heat consumed have also been investigated. The results obtained from this paper will provide guidance for the design of Dual–Miller Cycle cogeneration system and can be used for selection of optimal design parameters. - Highlights: • A thermodynamic performance estimation tool for DM cogeneration cycle is presented. • Using the model two special cases OM and dM cogeneration cycles can be analyzed. • The effects of r M , ψ, χ 2 and R have been investigated. • The results evaluate exergy output and environmental aspects together.

  18. Conventional and advanced exergetic analyses applied to a combined cycle power plant

    International Nuclear Information System (INIS)

    Petrakopoulou, Fontina; Tsatsaronis, George; Morosuk, Tatiana; Carassai, Anna

    2012-01-01

    Conventional exergy-based methods pinpoint components and processes with high irreversibilities. However, they lack certain insight. For a given advanced technological state, there is a minimum level of exergy destruction related to technological and/or economic constraints that is unavoidable. Furthermore, in any thermodynamic system, exergy destruction stems from both component interactions (exogenous) and component inefficiencies (endogenous). To overcome the limitations of the conventional analyses and to increase our knowledge about a plant, advanced exergy-based analyses have been developed. In this paper, a combined cycle power plant is analyzed using both conventional and advanced exergetic analyses. Except for the expander of the gas turbine system and the high-pressure steam turbine, most of the exergy destruction in the plant components is unavoidable. This unavoidable part is constrained by internal technological limitations, i.e. each component’s endogenous exergy destruction. High levels of endogenous exergy destruction show that component interactions do not contribute significantly to the thermodynamic inefficiencies. In addition, these inefficiencies are unavoidable to a large extent. With the advanced analysis, new improvement strategies are revealed that could not otherwise be found. -- Highlights: ► This is the first application of a complete advanced exergetic analysis to a complex power plant. ► In the three-pressure-level combined cycle power plant studied here, the improvement potential of the majority of the components is low, since most of the exergy destruction is unavoidable. ► Component interactions are generally of lower importance for the considered plant. ► Splitting the exogenous exergy destruction reveals one-to-one component interactions and improvement strategies. ► The advanced exergetic analysis is a necessary supplement to the conventional analysis in improving a complex system.

  19. Energetic and exergetic comparison of the human body for the summer season

    International Nuclear Information System (INIS)

    Caliskan, Hakan

    2013-01-01

    Highlights: • Energetic and exergetic comparison of the human body. • Usage of summer season data. • Calculation of entropy generation of the human body. • Thermal comfort. • Determining predicted mean vote rate and predicted percentage dissatisfied rate for the human comfort. - Abstract: The energy and exergy analyses are performed to the human body for the summer season of the Izmir city in Turkey. It is found that the metabolism energy and exergy rates are the major part of the human body’s energy generation. However, metabolism energy rate (58.326 W/m 2 ) is much higher than corresponding exergetic one (1.661 W/m 2 ). The maximum energy loss of the human body (70.59%) occurs due to heat exchange such as radiation, convection, and conduction. On the other hand, the maximum exergy loss of the human body happens due to exhaled humid air (6.393%), while the most of the total exergy is consumed by the human body (90.786%). Thermal comfort condition is also calculated. The Predicted Mean Vote (PMV) rate is found as 0.028 which means that the thermal sensation of the human body is called as comfortable. Furthermore, the Predicted Percentage Dissatisfied (PPD) rate is determined to be 5.017% which is low and shows the thermally dissatisfied people percentages

  20. Energetic and exergetic analysis of waste heat recovery systems in the cement industry

    International Nuclear Information System (INIS)

    Karellas, S.; Leontaritis, A.-D.; Panousis, G.; Bellos, E.; Kakaras, E.

    2013-01-01

    In a typical cement producing procedure, 25% of the total energy used is electricity and 75% is thermal energy. However, the process is characterized by significant heat losses mainly by the flue gases and the ambient air stream used for cooling down the clinker (about 35%–40% of the process heat loss). Approximately 26% of the heat input to the system is lost due to dust, clinker discharge, radiation and convection losses from the kiln and the preheaters. A heat recovery system could be used to increase the efficiency of the cement plant and thus contribute to emissions decrease. The aim of this paper is to examine and compare energetically and exergetically, two different WHR (waste heat recovery) methods: a water-steam Rankine cycle, and an Organic Rankine Cycle (ORC). A parametric study proved that the water steam technology is more efficient than ORC in exhaust gases temperature higher than 310 °C. Finally a brief economic assessment of the most efficient solution was implemented. WHR installations in cement industry can contribute significantly in the reduction of the electrical consumptions operating cost thus being a very attractive investment with a payback period up to 5 years. - Highlights: • This paper presents waste heat recovery as a way to gain energy from the exhaust gases in a cement plant. • Water steam cycle and ORC has been analyzed for waste heat recovery. • The energetic and exergetic evaluation of the two waste heat recovery processes is presented and compared

  1. Exergetic performance analyses of drying of broccoli florets in a tray drier

    International Nuclear Information System (INIS)

    Zafer Erbay

    2009-01-01

    At present, the drying process is one of the major procedures of food preservation and an important unit operation in a wide variety of food industries. Recently, drying of vegetables is of a particular interest because it is added to various ready-to-eat meals in order to improve their nutritional quality due to health benefit compounds present in vegetables (vitamins, phytochemicals, dietary fibers). Broccoli has been described as a vegetable with a high nutritional value due to its important content of vitamins, antioxidants and anti-carcinogenic compounds. Broccoli dehydration has not been investigated to a great extent and a few data are available in the open literature. In this study, broccoli florets were dried in a tray drier at a temperature range of 50-70 deg C with an air velocity range of 0.5-1.5 m/s. The performance of the process and system was evaluated using the exergy analysis method. Based on the experimental data, effects of the drying air temperature and the velocity on the performance of the drying process were discussed. It was obtained that the exergy evaporation rate and the exergetic efficiency of the process were obtained to vary between 0.0006-0.0029 kW and 0.27-1.16%, respectively. They increased as the drying air temperature increased, while the exergetic efficiency decreased with the rise in the drying air velocity. (author)

  2. Exergetic Aspects of Hydrogen Energy Systems—The Case Study of a Fuel Cell Bus

    Directory of Open Access Journals (Sweden)

    Evanthia A. Nanaki

    2017-02-01

    Full Text Available Electrifying transportation is a promising approach to alleviate climate change issues arising from increased emissions. This study examines a system for the production of hydrogen using renewable energy sources as well as its use in buses. The electricity requirements for the production of hydrogen through the electrolysis of water, are covered by renewable energy sources. Fuel cells are being used to utilize hydrogen to power the bus. Exergy analysis for the system is carried out. Based on a steady-state model of the processes, exergy efficiencies are calculated for all subsystems. The subsystems with the highest proportion of irreversibility are identified and compared. It is shown that PV panel has exergetic efficiency of 12.74%, wind turbine of 45%, electrolysis of 67%, and fuel cells of 40%.

  3. Exergetic performance analysis of a Dora II geothermal power plant in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Ganjehsarabi, Hadi; Gungor, Ali [Department of Mechanical Engineering, Faculty of Engineering, Ege University (Turkey); Dincer, Ibrahim [Faculty of Engineering and Applied Science, University of Ontario (Canada)

    2011-07-01

    In the energy sector there is an urgent need to produce energy from renewable energy sources due to the rising demand, the depletion of fossil fuels and their effects on the environment. Geothermal power is a well-established energy resource and the aim of this research was to examine the energetic performance of a geothermal power plant. The studied power plant, Dora II, has a 9.5 MW power output and is situated in Aydin, Turkey. An evaluation of the plant's performance was carried out using an exergy analysis method on each of the plant's components. Results showed that the highest exergy destruction occurs in brine re-injection while the preheater had the best exergy efficiency; the plant had an overall exergetic efficiency of 29.6%. This study highlighted the components where significant exergy destructions take place so actions could be taken to improve the overall efficiency.

  4. Exergetic life cycle assessment of cement production process with waste heat power generation

    International Nuclear Information System (INIS)

    Sui, Xiuwen; Zhang, Yun; Shao, Shuai; Zhang, Shushen

    2014-01-01

    Highlights: • Exergetic life cycle assessment was performed for the cement production process. • Each system’s efficiency before and after waste heat power generation was analyzed. • The waste heat power generation improved the efficiency of each production system. • It provided technical support for the implementation of energy-saving schemes. - Abstract: The cement industry is an industry that consumes a considerable quantity of resources and energy and has a very large influence on the efficient use of global resources and energy. In this study, exergetic life cycle assessment is performed for the cement production process, and the energy efficiency and exergy efficiency of each system before and after waste heat power generation is investigated. The study indicates that, before carrying out a waste heat power generation project, the objective energy efficiencies of the raw material preparation system, pulverized coal preparation system and rotary kiln system are 39.4%, 10.8% and 50.2%, respectively, and the objective exergy efficiencies are 4.5%, 1.4% and 33.7%, respectively; after carrying out a waste heat power generation project, the objective energy efficiencies are 45.8%, 15.5% and 55.1%, respectively, and the objective exergy efficiencies are 7.8%, 2.8% and 38.1%, respectively. The waste heat power generation project can recover 3.7% of the total input exergy of a rotary kiln system and improve the objective exergy efficiencies of the above three systems. The study can identify degree of resource and energy utilization and the energy-saving effect of a waste heat power generation project on each system, and provide technical support for managers in the implementation of energy-saving schemes

  5. Energetic, exergetic, thermoeconomic and environmental analysis of various systems for the cogeneration of biogas produced by an urban wastewater treatment plant UWTP

    Energy Technology Data Exchange (ETDEWEB)

    Coble, J.J. [Nebrija Univ., Madrid (Spain). Industrial Engineering Dept.; Contreras, A. [Industrial Engineering College, Madrid (Spain). Chemistry Dept.

    2010-07-01

    General awareness that the world's energy resources are limited has meant that it is increasingly important to examine energy-saving devices and fuels more closely, in order to use our limited available resources in a more sustainable manner. With this in mind, we studied biogas from a UWTP, because it is a renewable fuel with a neutral contribution to CO2 emissions. We compared two technologies for using biogas as an energy source: cogeneration using either motor-generators or phosphoric acid fuel cells. The comparison was made from the energetic, exergetic, thermo-economic and environmental points of view, internalizing all the costs involved in each case. We used data supplied by the UWTP at the City of Madrid Plant Nursery, which uses motor-generators, and the UWTPs in Portland, Oregon, and in Red Hook, New York, which use a phosphoric acid fuel cell. The joint work carried out has been divided into three parts for publication purposes, and we present here the first of these, which refers to the energy analysis. (orig.)

  6. Target Cultivation and Financing Parameters for Sustainable Production of Fuel and Feed from Microalgae.

    Science.gov (United States)

    Gerber, Léda N; Tester, Jefferson W; Beal, Colin M; Huntley, Mark E; Sills, Deborah L

    2016-04-05

    Production of economically competitive and environmentally sustainable algal biofuel faces technical challenges that are subject to high uncertainties. Here we identify target values for algal productivity and financing conditions required to achieve a biocrude selling price of $5 per gallon and beneficial environmental impacts. A modeling framework--combining process design, techno-economic analysis, life cycle assessment, and uncertainty analysis--was applied to two conversion pathways: (1) "fuel only (HTL)", using hydrothermal liquefaction to produce biocrude, heat and power, and (2) "fuel and feed", using wet extraction to produce biocrude and lipid-extracted algae, which can substitute components of animal and aqua feeds. Our results suggest that with supporting policy incentives, the "fuel and feed" scenario will likely achieve a biocrude selling price of less than $5 per gallon at a productivity of 39 g/m(2)/day, versus 47 g/m(2)/day for the "fuel only (HTL)" scenario. Furthermore, if lipid-extracted algae are used to substitute fishmeal, the process has a 50% probability of reaching $5 per gallon with a base case productivity of 23 g/m(2)/day. Scenarios with improved economics were associated with beneficial environmental impacts for climate change, ecosystem quality, and resource depletion, but not for human health.

  7. Application of the exergetic cost theory to the LiBr/H2O vapour absorption system

    International Nuclear Information System (INIS)

    Misra, R.D.; Sahoo, P.K.; Gupta, A.

    2002-01-01

    Optimization of thermal systems is generally based on thermodynamic analysis. However, the systems so optimized often are not viable due to economic constraints. The Theory of Exergetic Cost, a thermoeconomic optimization technique, combines the thermodynamic analysis with that of economic constraints to obtain an optimum configuration of a thermal system. In this paper, this technique is applied to optimize a LiBr/H 2 O vapour absorption refrigeration system run by pressurized hot water for air-conditioning applications. The mathematical and numerical techniques-based optimization of thermal systems is not always possible due to plant complexities. Hence, a simplified cost minimization methodology, based on 'Theory of Exergetic Cost', is applied to evaluate the economic costs of all the internal flows and products of the system under consideration. As shown in this paper, once these costs are determined, an approximately optimum design configuration can be obtained

  8. What is the effect of optimum independent parameters on solar heating systems?

    International Nuclear Information System (INIS)

    Kaçan, Erkan; Ulgen, Koray; Kaçan, Erdal

    2015-01-01

    Highlights: • The efficiency effect of 4 independent parameters over the solar heating system are examined. • 3 of 4 independent parameters are found as decisive parameter for system design. • Maximum exergetic efficiency exceeded 11% at optimized process. • Maximum environmental efficiency reached up to 95% at optimized process. • The optimum outside temperature and solar radiation are found as 22 °C and 773 W/m"2 for all responses. - Abstract: Researchers are rather closely involved in Solar Combisystems recently, but there is lack of study that presents the optimum design parameters. Therefore, in this study the influence of the four major variables, namely; outside, inside temperature, solar radiation on horizontal surface and instantaneous efficiency of solar collector on the energetic, exergetic and environmental efficiencies of Solar Combisystems are investigated and system optimization is done by a combination of response surface methodology. Measured parameters and energetic–exergetic and environmental performance curves are found and statistical model is created parallel with the actual data. It is found that statistical model is significant and all “lack-of-fit” values are non-significant. Thus, it is proved that statistical model strongly represents the design model. Outside temperature, solar radiation on horizontal surface and instantaneous efficiency of solar collector are the decisive parameters for all responses but instantaneous efficiency of solar collector is not for environmental efficiency. Maximum exergetic efficiency exceeded 11%, maximum environmental efficiency reached up to 95% at optimized process. The optimum value of the outside temperature and solar radiation are found as 22 °C and 773 W/m"2 for all responses, on the other hand optimum collector efficiency is found around 60% for energetic and exergetic efficiency values. Inside temperature is not a decisive parameter for all responses.

  9. Preparation Parameter Analysis and Optimization of Sustainable Asphalt Binder Modified by Waste Rubber and Diatomite

    Directory of Open Access Journals (Sweden)

    Hanbing Liu

    2018-01-01

    Full Text Available In this study, crumb rubber and diatomite were used to modify asphalt binder. Wet process was adopted as a preparation method, and the corresponding preparation process was determined firstly. The effects of six preparation parameters (crumb rubber concentration, diatomite concentration, shear time, shear speed, shear temperature, and storing time on properties of modified asphalt binder (penetration at 25°C, softening point, ductility, viscosity at 135°C, elastic recovery, and penetration index were investigated, and multiresponse optimization was conducted using the response surface method. The results revealed that softening points, viscosity, elastic recovery, and penetration index increase, while penetration and ductility decrease with the increase of crumb rubber concentration. Softening points, viscosity, and penetration index increase, while penetration and ductility decrease with the increase of diatomite concentration, which presents little influence on elastic recovery of binder. Shear temperature presented significant effects on penetration, softening point, viscosity, and ductility. Shear speed, shear time, and storing time have similar effects on binder properties because of their similar mechanism of action. Based on the model obtained from the response surface method, optimized preparation parameters corresponding to specific criteria can be determined, which possess favorable accuracy compared with experimental results.

  10. Effect of cutting parameters on sustainable machining performance of coated carbide tool in dry turning process of stainless steel 316

    Science.gov (United States)

    Bagaber, Salem A.; Yusoff, Ahmed Razlan

    2017-04-01

    The manufacturing industry aims to produce many products of high quality with relatively less cost and time. Different cutting parameters affect the machining performance of surface roughness, cutting force, and material removal rate. Nevertheless, a few studies reported on the effects of sustainable factors such as power consumed, cycle time during machining, and tool life on the dry turning of AISI 316. The present study aims to evaluate the machining performance of coated carbide in the machining of hard steel AISI 316 under the dry turning process. The influence of cutting parameters of cutting speed, feed rate, and depth of cut with their five (5) levels is established by a central composite design. Highly significant parameters were determined by analysis of variance (ANOVA), and the main effects of power consumed and time during machining, surface roughness, and tool wear were observed. Results showed that the cutting speed was proportional to power consumption and tool wear. Meanwhile, insignificant to surface roughness, feed rate most significantly affected surface roughness and power consumption followed by depth of cut.

  11. Determination of sustainable values for the parameters of the construction of residential buildings

    Science.gov (United States)

    Grigoreva, Larisa; Grigoryev, Vladimir

    2018-03-01

    For the formation of programs for housing construction and planning of capital investments, when developing the strategic planning companies by construction companies, the norms or calculated indicators of the duration of the construction of high-rise residential buildings and multifunctional complexes are mandatory. Determination of stable values of the parameters for the high-rise construction residential buildings provides an opportunity to establish a reasonable duration of construction at the planning and design stages of residential complexes, taking into account the influence of market conditions factors. The concept of the formation of enlarged models for the high-rise construction residential buildings is based on a real mapping in time and space of the most significant redistribution with their organizational and technological interconnection - the preparatory period, the underground part, the above-ground part, external engineering networks, landscaping. The total duration of the construction of a residential building, depending on the duration of each redistribution and the degree of their overlapping, can be determined by one of the proposed four options. At the same time, a unified approach to determining the overall duration of construction on the basis of the provisions of a streamlined construction organization with the testing of results on the example of high-rise residential buildings of the typical I-155B series was developed, and the coefficients for combining the work and the main redevelopment of the building were determined.

  12. Determination of sustainable values for the parameters of the construction of residential buildings

    Directory of Open Access Journals (Sweden)

    Grigoreva Larisa

    2018-01-01

    Full Text Available For the formation of programs for housing construction and planning of capital investments, when developing the strategic planning companies by construction companies, the norms or calculated indicators of the duration of the construction of high-rise residential buildings and multifunctional complexes are mandatory. Determination of stable values of the parameters for the high-rise construction residential buildings provides an opportunity to establish a reasonable duration of construction at the planning and design stages of residential complexes, taking into account the influence of market conditions factors. The concept of the formation of enlarged models for the high-rise construction residential buildings is based on a real mapping in time and space of the most significant redistribution with their organizational and technological interconnection - the preparatory period, the underground part, the above-ground part, external engineering networks, landscaping. The total duration of the construction of a residential building, depending on the duration of each redistribution and the degree of their overlapping, can be determined by one of the proposed four options. At the same time, a unified approach to determining the overall duration of construction on the basis of the provisions of a streamlined construction organization with the testing of results on the example of high-rise residential buildings of the typical I-155B series was developed, and the coefficients for combining the work and the main redevelopment of the building were determined.

  13. Geoelectrical parameter-based multivariate regression borehole yield model for predicting aquifer yield in managing groundwater resource sustainability

    Directory of Open Access Journals (Sweden)

    Kehinde Anthony Mogaji

    2016-07-01

    Full Text Available This study developed a GIS-based multivariate regression (MVR yield rate prediction model of groundwater resource sustainability in the hard-rock geology terrain of southwestern Nigeria. This model can economically manage the aquifer yield rate potential predictions that are often overlooked in groundwater resources development. The proposed model relates the borehole yield rate inventory of the area to geoelectrically derived parameters. Three sets of borehole yield rate conditioning geoelectrically derived parameters—aquifer unit resistivity (ρ, aquifer unit thickness (D and coefficient of anisotropy (λ—were determined from the acquired and interpreted geophysical data. The extracted borehole yield rate values and the geoelectrically derived parameter values were regressed to develop the MVR relationship model by applying linear regression and GIS techniques. The sensitivity analysis results of the MVR model evaluated at P ⩽ 0.05 for the predictors ρ, D and λ provided values of 2.68 × 10−05, 2 × 10−02 and 2.09 × 10−06, respectively. The accuracy and predictive power tests conducted on the MVR model using the Theil inequality coefficient measurement approach, coupled with the sensitivity analysis results, confirmed the model yield rate estimation and prediction capability. The MVR borehole yield prediction model estimates were processed in a GIS environment to model an aquifer yield potential prediction map of the area. The information on the prediction map can serve as a scientific basis for predicting aquifer yield potential rates relevant in groundwater resources sustainability management. The developed MVR borehole yield rate prediction mode provides a good alternative to other methods used for this purpose.

  14. Sustainable product development based on second law of thermodynamics

    International Nuclear Information System (INIS)

    Winkler, Wolfgang

    2011-01-01

    The necessary reduction of the human footprint demanded by Sustainable Development can be measured by the entropy flow of the society to the environment. The classic tools of process evaluation as e.g. exergetic or life cycle analysis are able to evaluate existing solutions. But their use during the design phase is quite limited because of lacking information about the system and its components. They may be helpful for evolutionary development strategies on a long term only. But reversible process structures can be used as benchmarks already in the conceptual design phase to introduce the demands of the second law. It can be shown that basic human demands on housing, mobility, communication, and infrastructure and industry can be principally supplied by reversible process structures. Because the process logic is a virtual one, real processes can be engineered with a reversible structure however its components produce irreversible entropy flows. Hybrid cars are the most common examples here. The use of exergetic efficiencies allows a transfer of the results of reversible structures to real technology easily. The here presented methodology of sustainable engineering can be summarized by three design rules as using reversible structures, considering technology by exergetic efficiencies, and minimizing components' entropy export. The still increasing utilization of electricity in upcoming technologies is very helpful for introducing reversible structures within hybrid technologies.

  15. Exergetic and exergoeconomic analysis of a novel hybrid solar–geothermal polygeneration system producing energy and water

    International Nuclear Information System (INIS)

    Calise, Francesco; D’Accadia, Massimo Dentice; Macaluso, Adriano; Piacentino, Antonio; Vanoli, Laura

    2016-01-01

    Highlights: • Exergetic and exergoeconomic analysis of hybrid renewable system is presented. • The system provides electric, thermal and cooling energy and desalinated water. • Exergy efficiency varies between 40–50% in the winter and 16–20% in the summer. • Electricity and fresh water costs vary between 15–17 and 57–60 c€/kW h_e_x. • Chilled and hot water costs vary between 18.6–18.9 and 1.6–1.7 c€/kW h_e_x. - Abstract: A dynamic simulation model of a novel solar–geothermal polygeneration system and the related exergetic and exergoeconomic analyses are presented in this paper. The plant is designed in order to supply electrical, thermal and cooling energy and fresh water for a small community, connected to a district heating and cooling network. The hybrid system is equipped with an Organic Rankine Cycle fueled by medium-enthalpy geothermal energy and by a Parabolic Trough Collector solar field. Geothermal brine is also used for space heating and cooling purposes. Finally, geothermal fluid supplies heat to a Multi-Effect Distillation unit, producing also desalinized water from seawater. Dynamic simulations were performed in order to design the system. The overall simulation model, implemented in TRNSYS environment, includes detailed algorithms for the simulation of system components. Detailed control strategies were included in the model in order to properly manage the system. An exergetic and exergoeconomic analysis is also implemented. The exergetic analysis allows to identify all the aspects that affect the global exergy efficiency, in order to suggest possible system enhancements. The accounting of exergoeconomic costs aims at establishing a monetary value to all material and energy flows, then providing a reasonable basis for price allocation. The analysis is applied to integral values of energy and a comparison of results between summer and winter season is performed. Results are analyzed on different time bases presenting

  16. Resource recovery from residual household waste: An application of exergy flow analysis and exergetic life cycle assessment.

    Science.gov (United States)

    Laner, David; Rechberger, Helmut; De Soete, Wouter; De Meester, Steven; Astrup, Thomas F

    2015-12-01

    Exergy is based on the Second Law of thermodynamics and can be used to express physical and chemical potential and provides a unified measure for resource accounting. In this study, exergy analysis was applied to four residual household waste management scenarios with focus on the achieved resource recovery efficiencies. The calculated exergy efficiencies were used to compare the scenarios and to evaluate the applicability of exergy-based measures for expressing resource quality and for optimizing resource recovery. Exergy efficiencies were determined based on two approaches: (i) exergy flow analysis of the waste treatment system under investigation and (ii) exergetic life cycle assessment (LCA) using the Cumulative Exergy Extraction from the Natural Environment (CEENE) as a method for resource accounting. Scenario efficiencies of around 17-27% were found based on the exergy flow analysis (higher efficiencies were associated with high levels of material recycling), while the scenario efficiencies based on the exergetic LCA lay in a narrow range around 14%. Metal recovery was beneficial in both types of analyses, but had more influence on the overall efficiency in the exergetic LCA approach, as avoided burdens associated with primary metal production were much more important than the exergy content of the recovered metals. On the other hand, plastic recovery was highly beneficial in the exergy flow analysis, but rather insignificant in exergetic LCA. The two approaches thereby offered different quantitative results as well as conclusions regarding material recovery. With respect to resource quality, the main challenge for the exergy flow analysis is the use of exergy content and exergy losses as a proxy for resource quality and resource losses, as exergy content is not per se correlated with the functionality of a material. In addition, the definition of appropriate waste system boundaries is critical for the exergy efficiencies derived from the flow analysis, as it

  17. Identification of energy gain potential in industrial processes, through exergetic analysis; Identificacao de potenciais de ganho energetico em processos industriais via analise exergetica

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Lis Nunes; Silva, Ricardo Junqueira; Bernardes, Lucas Lanza; Filgueiras, Pedro Freire [V e M do Brasil S.A., Belo Horizonte, MG (Brazil)

    2011-12-21

    V and M Brazil is an integrated steel mill for the production of steel tubes. The manufacturing process includes various processes and thermal equipment, such as industrial furnaces, boilers, and others. Due to its importance, it is essential that these devices operate with the best possible efficiency. Thus, it becomes necessary to use tools and methods for performance analysis of energy processes that occurs on these devices. One tool that has been widely used in industrial environment is the exergy analysis. It is based on the Second Law of Thermodynamics, and therefore takes into account the entropy generation, indicating the maximum amount of useful energy (work) that can be drawn from a stream, with reference to environmental parameters. This paper aims to apply the exergetic methodology in industrial thermal processes that occurs at V and M Brazil, as a tool for identification of losses and potential performance improvement of energy systems to save on fuel and the reduction of environmental impacts and emissions of greenhouse gases. (author)

  18. Effect of fuel oxygen on the energetic and exergetic efficiency of a compression ignition engine fuelled separately with palm and karanja biodiesels

    International Nuclear Information System (INIS)

    Jena, Jibanananda; Misra, Rahul Dev

    2014-01-01

    Exergy analysis of any thermodynamic system can take care of the limitations of energy analysis such as irreversible losses, their magnitude and the source of thermodynamic inefficiencies apart from energy losses. In the present study, both the analyses along with heat release analysis are conducted on a natural aspirated diesel engine fuelled separately with palm biodiesel (PB), karanja biodiesel (KB), and petrodiesel (PD) using the experimental data. Since the engine performs best at about 85% loading condition, the energetic and exergetic performance parameters of the engine are evaluated at 85% loading condition for each type of fuel. The aim of the study is to determine the effect of fuel oxygen on energy and exergy efficiencies of a CI (compression ignition) engine. Various exergy losses, exergy destruction and their ratios associated with the heat transfer through cooling water, radiation, exhaust gas, friction, and some uncounted exergy destruction are investigated. Apart from exergy loss due to heat transfer; the uncounted exergy destruction (due to combustion) also plays a major role in the system inefficiency. Based on the comparative assessment of the obtained results, it is concluded that a better combustion with less irreversibility is possible with the increase in O 2 content in the fuel. - Highlights: • Efficiency of a CI engine increases with the increase in oxygen quantity in the fuel. • Irreversibility of a CI engine decreases with increase in oxygen content in the fuel. • Palm biodiesel performs better than karanja biodiesel and petrodiesel for a CI engine

  19. Multi-objective optimization of a cascade refrigeration system: Exergetic, economic, environmental, and inherent safety analysis

    International Nuclear Information System (INIS)

    Eini, Saeed; Shahhosseini, Hamidreza; Delgarm, Navid; Lee, Moonyong; Bahadori, Alireza

    2016-01-01

    Highlights: • A multi-objective optimization is performed for a cascade refrigeration cycle. • The optimization problem considers inherently safe design as well as 3E analysis. • As a measure of inherent safety level a quantitative risk analysis is utilized. • A CO 2 /NH 3 cascade refrigeration system is compared with a CO 2 /C 3 H 8 system. - Abstract: Inherently safer design is the new approach to maximize the overall safety of a process plant. This approach suggests some risk reduction strategies to be implemented in the early stages of design. In this paper a multi-objective optimization was performed considering economic, exergetic, and environmental aspects besides evaluation of the inherent safety level of a cascade refrigeration system. The capital costs, the processing costs, and the social cost due to CO 2 emission were considered to be included in the economic objective function. Exergetic efficiency of the plant was considered as the second objective function. As a measure of inherent safety level, Quantitative Risk Assessment (QRA) was performed to calculate total risk level of the cascade as the third objective function. Two cases (ammonia and propane) were considered to be compared as the refrigerant of the high temperature circuit. The achieved optimum solutions from the multi–objective optimization process were given as Pareto frontier. The ultimate optimal solution from available solutions on the Pareto optimal curve was selected using Decision-Makings approaches. NSGA-II algorithm was used to obtain Pareto optimal frontiers. Also, three decision-making approaches (TOPSIS, LINMAP, and Shannon’s entropy methods) were utilized to select the final optimum point. Considering continuous material release from the major equipment in the plant, flash and jet fire scenarios were considered for the CO 2 /C 3 H 8 cycle and toxic hazards were considered for the CO 2 /NH 3 cycle. The results showed no significant differences between CO 2 /NH 3 and

  20. Exergetic Analysis, Optimization and Comparison of LNG Cold Exergy Recovery Systems for Transportation

    Directory of Open Access Journals (Sweden)

    Paweł Dorosz

    2018-01-01

    Full Text Available LNG (Liquefied Natural Gas shares in the global energy market is steadily increasing. One possible application of LNG is as a fuel for transportation. Stricter air pollution regulations and emission controls have made the natural gas a promising alternative to liquid petroleum fuels, especially in the case of heavy transport. However, in most LNG-fueled vehicles, the physical exergy of LNG is destroyed in the regasification process. This paper investigates possible LNG exergy recovery systems for transportation. The analyses focus on “cold energy” recovery systems as the enthalpy of LNG, which may be used as cooling power in air conditioning or refrigeration. Moreover, four exergy recovery systems that use LNG as a low temperature heat sink to produce electric power are analyzed. This includes single-stage and two-stage direct expansion systems, an ORC (Organic Rankine Cycle system, and a combined system (ORC + direct expansion. The optimization of the above-mentioned LNG power cycles and exergy analyses are also discussed, with the identification of exergy loss in all components. The analyzed systems achieved exergetic efficiencies in the range of 20 % to 36 % , which corresponds to a net work in the range of 214 to 380 kJ/kg L N G .

  1. Exergetic analysis and thermoeconomic study for a container-housed engine

    Energy Technology Data Exchange (ETDEWEB)

    Sala, J.M.; Eguia, J.; Flores, I. [Escuela Superior de Ingenieros Industriales de Bilbao, Universidad del Pais Vasco, Alameda de Urquijo, s/n 48013 Bilbao, Bizkaia (Spain); Lopez-Gonzalez, L.M.; Ruiz de Adana, M. [Escuela Tecnica Superior de Ingenieria Industrial, Universidad de La Rioja, C/Luis de Ulloa, 20. E-26004 Logrono, La Rioja (Spain); Miguez, J.L. [Universidad de Vigo, Escuela Tecnica Superior de Ingenieros Industriales, C/Lagoas-Marcosende, s/n 36200 Vigo, Pontevedra (Spain)

    2006-11-15

    This paper presents the engineering design and theoretical exergetic analyses for a container-housed reciprocating engine. The exergy analysis conducted was based on the first and second laws of thermodynamics for power generation systems. Using thermographic inspection, the heat dissipated by each one of the 28 elements under consideration in the engine container was assessed, together with the mass flow rate of air supplied to the cab and the air temperature at the inlet and outlet. This information is essential for the proper design of the ventilation system needed to disseminate the heat generated inside the container-housed unit. The energy balance and corresponding exergy balance were drawn up using the values thus obtained and the information available on the engine. The engine efficiency rates were evaluated on both an energy and exergy basis, taking into account that heat from the cooling circuit and exhaust fumes are used for CHP. Finally, thermoeconomics was applied to calculate the costs of the electricity and useful heat energy produced by the engine. The result of this study should be to optimize the design of container-housed CHP systems, showing where exergy losses occur and identifying areas of improvement. (author)

  2. Analysis of energetic and exergetic efficiency, and environmental benefits of biomass integrated gasification combined cycle technology.

    Science.gov (United States)

    Mínguez, María; Jiménez, Angel; Rodríguez, Javier; González, Celina; López, Ignacio; Nieto, Rafael

    2013-04-01

    The problem of the high carbon dioxide emissions linked to power generation makes necessary active research on the use of biofuels in gas turbine systems as a promising alternative to fossil fuels. Gasification of biomass waste is particularly of interest in obtaining a fuel to be run in gas turbines, as it is an efficient biomass-to-biofuel conversion process, and an integration into a combined cycle power plant leads to a high performance with regard to energetic efficiency. The goal of this study was to carry out an energetic, exergetic and environmental analysis of the behaviour of an integrated gasification combined cycle (IGCC) plant fuelled with different kinds of biomass waste by means of simulations. A preliminary economic study is also included. Although a technological development in gasification technology is necessary, the results of simulations indicate a high technical and environmental interest in the use of biomass integrated gasification combined cycle (BioIGCC) systems for large-scale power generation from biomass waste.

  3. Optimization of Two-Stage Peltier Modules: Structure and Exergetic Efficiency

    Directory of Open Access Journals (Sweden)

    Cesar Ramirez-Lopez

    2012-08-01

    Full Text Available In this paper we undertake the theoretical analysis of a two-stage semiconductor thermoelectric module (TEM which contains an arbitrary and different number of thermocouples, n1 and n2, in each stage (pyramid-styled TEM. The analysis is based on a dimensionless entropy balance set of equations. We study the effects of n1 and n2, the flowing electric currents through each stage, the applied temperatures and the thermoelectric properties of the semiconductor materials on the exergetic efficiency. Our main result implies that the electric currents flowing in each stage must necessarily be different with a ratio about 4.3 if the best thermal performance and the highest temperature difference possible between the cold and hot side of the device are pursued. This fact had not been pointed out before for pyramid-styled two stage TEM. The ratio n1/n2 should be about 8.

  4. Exergetic analysis of a thermo-generator for automotive application: A dynamic numerical approach

    Science.gov (United States)

    Glavatskaya, O.; Goupil, C.; Bakkali, A. El; Shonda, O.

    2012-06-01

    It is well known that, when using a passenger car with an ICE (Internal Combustion Engine), only a fraction of the burnt fuel energy actually contributes to drive the vehicle. Typical passenger vehicle engines run about 25% efficiency while a great part of the remaining energy (about 40%), is lost through the exhaust gases. This latter has a significant energy conversion potential since the temperature (more than 300°C) and the mass flow rate are high enough. Thus, direct conversion of heat into electricity is a credible option if the overall system is optimized. This point is crucial since the heat conversion into work process is very sensible to any mismatching of the different parts of the system, and very sensible significant to the possible varying working conditions. All these effects constitute irreversibility sources that degrade the overall efficiency. The exergetic analysis is known to be an efficient tool for finding the root causes of theses irreversible processes. In order to investigate the performance of our automotive thermo-generator we propose an analysis of the exergy flow through the system under dynamic conditions. Taking into account the different irreversible sources such as thermal conduction and Joule effect, we are able to localize and quantify the exergy losses. Then, in order to optimize the thermoelectric converter for a given vehicle, correct actions in term of design and working conditions can be proposed.

  5. Comparative exergetic performance analysis for certain thermal power plants in Serbia

    Directory of Open Access Journals (Sweden)

    Mitrović Dejan M.

    2016-01-01

    Full Text Available Traditional methods of analysis and calculation of complex thermal systems are based on the first law of thermodynamics. These methods use energy balance for a system. In general, energy balances do not provide any information about internal losses. In contrast, the second law of thermodynamics introduces the concept of exergy, which is useful in the analysis of thermal systems. Exergy is a measure for assessing the quality of energy, and allows one to determine the location, cause, and real size of losses incurred as well as residues in a thermal process. The purpose of this study is to comparatively analyze the performance of four thermal power plants from the energetic and exergetic viewpoint. Thermodynamic models of the plants are developed based on the first and second law of thermodynamics. The primary objectives of this paper are to analyze the system components separately and to identify and quantify the sites having largest energy and exergy losses. Finally, by means of these analyses, the main sources of thermodynamic inefficiencies as well as a reasonable comparison of each plant to others are identified and discussed. As a result, the outcomes of this study can provide a basis for the improvement of plant performance for the considered thermal power plants.

  6. Lithium bromide high-temperature absorption heat pump: coefficient of performance and exergetic efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Izquierdo, M [Consejo Superior de Investigaciones Cientificas, Madrid (ES). Inst. de Optica; Aroca, S [Escuela Tecnica Superior de Ingenieros Industriales, Valladolid (ES). Catedratico de Ingenieria Termica

    1990-04-01

    A theoretical study of a lithium bromide absorption heat pump, used as a machine type I and aimed to produce heat at 120{sup 0}C via waste heat sources at 60{sup 0}C, is given. Real performance conditions are stated for each component of the machine. By means of thermodynamic diagrams (p, t, x) and (h, x), the required data are obtained for calculation of the heat recovered in the evaporator Q{sub e}, the heat delivered to the absorber Q{sub a} and to the condenser Q{sub c}, and the heat supplied to the generator Q{sub g}. The heat delivered by the hot solution to the cold solution in the heat recovered Q{sub r}, and the work W{sub p} done by the solution pump are calculated. The probable COP is calculated as close to 1.4 and the working temperature in the generator ranges from 178 to 200{sup 0}C. The heat produced by the heat pump is 22% cheaper than that obtained from a cogeneration system comprising a natural gas internal combustion engine and high temperature heat pump with mechanical compression. Compared with a high temperature heat pump with mechanical compression, the heat produced by the absorption heat pump is 31% cheaper. From (h, x) and (s, x) diagrams, exergy losses for each component can be determined leading to an exergetic efficiency of 75% which provides the quality index of the absorption cycle. (author).

  7. Exergetic Analysis of an Integrated Tri-Generation Organic Rankine Cycle

    Directory of Open Access Journals (Sweden)

    Ratha Z. Mathkor

    2015-08-01

    Full Text Available This paper reports on a study of the modelling, validation and analysis of an integrated 1 MW (electrical output tri-generation system energized by solar energy. The impact of local climatic conditions in the Mediterranean region on the system performance was considered. The output of the system that comprised a parabolic trough collector (PTC, an organic Rankine cycle (ORC, single-effect desalination (SED, and single effect LiBr-H2O absorption chiller (ACH was electrical power, distilled water, and refrigerant load. The electrical power was produced by the ORC which used cyclopentane as working fluid and Therminol VP-1 was specified as the heat transfer oil (HTO in the collectors with thermal storage. The absorption chiller and the desalination unit were utilize the waste heat exiting from the steam turbine in the ORC to provide the necessary cooling energy and drinking water respectively. The modelling, which includes an exergetic analysis, focuses on the performance of the solar tri-generation system. The simulation results of the tri-generation system and its subsystems were produced using IPSEpro software and were validated against experimental data which showed good agreement. The tri-generation system was able to produce about 194 Ton of refrigeration, and 234 t/day distilled water.

  8. Exergetic analysis and thermoeconomic study for a container-housed engine

    International Nuclear Information System (INIS)

    Sala, J.M.; Lopez-Gonzalez, L.M.; Ruiz de Adana, M.; Miguez, J.L.; Eguia, J.; Flores, I.

    2006-01-01

    This paper presents the engineering design and theoretical exergetic analyses for a container-housed reciprocating engine. The exergy analysis conducted was based on the first and second laws of thermodynamics for power generation systems. Using thermographic inspection, the heat dissipated by each one of the 28 elements under consideration in the engine container was assessed, together with the mass flow rate of air supplied to the cab and the air temperature at the inlet and outlet. This information is essential for the proper design of the ventilation system needed to disseminate the heat generated inside the container-housed unit. The energy balance and corresponding exergy balance were drawn up using the values thus obtained and the information available on the engine. The engine efficiency rates were evaluated on both an energy and exergy basis, taking into account that heat from the cooling circuit and exhaust fumes are used for CHP. Finally, thermoeconomics was applied to calculate the costs of the electricity and useful heat energy produced by the engine. The result of this study should be to optimize the design of container-housed CHP systems, showing where exergy losses occur and identifying areas of improvement

  9. EXAMINATION OF THE THERMODYNAMIC PARAMETERS OF THE RESIDENTIAL COMMERCIAL SECTOR: AN APPLICATION

    Directory of Open Access Journals (Sweden)

    Zafer Utlu

    2012-01-01

    Full Text Available The energy utilization of a country can be evaluated using exergy analysis, which is a way to a sustainable development, to gain insights into its efficiency. The authors have conducted various studies on analyzing the energy utilization efficiencies of Turkey and extend here these studies by dealing with the investigation of the thermodynamic parameters in the Turkish residential-commercial sector (TRCS. The thermodynamic parameters considered are as follows: (i fuel depletion rate, (ii relative irreversibility, (iii productivity lack, and (iv exergetic factor. These parameters are determined for the components of the TRCS in an attempt to assess their individual performances and are also compared to each other, while the analysis is done based on the actual data. The present study has clearly indicated the necessity of the planned studies towards increasing exergy efficiencies in the sector studied and especially the critical role of policymakers in establishing effective energyefficiency delivery mechanisms throughout the country. It may be concluded that the current methodology is useful for analyzing the sectoral energy and exergy utilization, giving energy saving opportunities.

  10. Exergetic analysis of refrigeration system of the Pelletron-Linac particle accelerator of the University of Sao Paulo

    International Nuclear Information System (INIS)

    Oliveira Filho, O.B. de

    1993-01-01

    The Pelletron-Linac accelerator of the University of Sao Paulo will use the existing electrostatic Pelletron accelerator as an injector for the linear superconducting accelerator (Linac), to increase the acceleration of the particles. The Linac uses a forced flow circulation helium system to promote continuous refrigeration for long periods of time, at temperatures below or equal to 4,9 K. This paper shows the exergetic analysis of the Pelletron-linac refrigerator, identifying the main sources of irreversibilities and evaluating energetic consumption of the system. An exergy-enthalpy diagram for the helium shows the thermodynamic processes that take place in the refrigeration plant and the exergy losses. (author)

  11. Energetic and exergetic investigation of an organic Rankine cycle at different heat source temperatures

    International Nuclear Information System (INIS)

    Li, Jing; Pei, Gang; Li, Yunzhu; Wang, Dongyue; Ji, Jie

    2012-01-01

    The energetic and exergetic performance of an updated ORC (organic Rankine cycle) is investigated. The thermal efficiencies of the ORC at different heat source temperatures of about 100, 90, 80, and 70 °C are explored. The thermodynamic irreversibility that takes place in the evaporator, condenser, turbine, pump, and separator is revealed. The ORC feasibility for low-temperature applications is demonstrated. With a hot side temperature of around 80 °C, a thermal efficiency of 7.4% and a turbine isentropic efficiency of 0.68 can be achieved. The present research further indicates that exergy destruction caused by heat transfer through an appreciable temperature difference in the evaporator is the largest in the energy conversion process, followed by that in the condenser. The exergy destroyed in the heat exchangers amounts to 74% of the overall exergy loss. The total system exergy efficiency is approximately 40%; thus, ways to improve exergy efficiency are required. HCFC-123, a dry fluid, is experimentally confirmed to be highly superheated after expansion in this study. A regenerator should be used to preheat HCFC-123 prior to entering the evaporator. Meanwhile the heat-transfer configuration with two oil cycles can be a good solution to overcome the thermodynamic disadvantage of a one-stage evaporator. -- Highlights: ► An updated ORC system is introduced. ► The ORC feasibility for low-temperature applications is experimentally demonstrated. ► Thermodynamic irreversibility in ORC components is revealed. ► Suggestions are given to reduce the exergy destruction.

  12. Considerações da análise exergética em tarifas de energia elétrica Considerations of the exergetic analysis on electric energy rates

    Directory of Open Access Journals (Sweden)

    Delly Oliveira Filho

    2000-04-01

    Full Text Available É importante que o projeto de sistemas de energia seja concebido de modo que a qualidade da energia para uso final seja a melhor possível, evitando situações em que um suprimento de alta qualidade seja usado em um uso final de baixa qualidade como é, por exemplo, o aquecimento de água via energia elétrica. Na elaboração de tarifas de energia elétrica, vários parâmetros são considerados, dentre eles os sociais, políticos, estratégicos e de engenharia. Dentre os critérios da engenharia, a eficiência do sistema pode ser considerada uma das mais importantes - utilizações racionais de energia. Iluminação, aquecimento e força motriz, por exemplo, podem ser incentivados ou não pelos critérios de eficiência adotados. A eficiência de um sistema pode ser medida de duas maneiras: pela eficiência energética e pela eficiência exergética, embora esta não seja considerada atualmente como parâmetro na elaboração de tarifas de energia elétrica. Se considerações exergéticas, além das energéticas, fossem tomadas, haveria uma profunda mudança na matriz energética brasileira. Neste artigo foram estudadas as conseqüências de uma tarifa exergética aplicada nas tarifas de energia elétrica atualmente vigentes, tanto para a sociedade quanto para o consumidor e as concessionárias de energia elétrica.It is important that the energy systems be designed in such a way that the quality of energy of a given end-use matches, as much as possible, the natural resources, avoiding situations where high quality energy be used by a given end-use of low quality. In the electric energy rates elaboration some parameters are considered, including social, political, strategic and engineering. Among the engineering criteria, the system efficiency may be considered as one of the most important. Rational utilization of the energy in lighting, heating and traction, for example, can be stimulated or not, by the efficiency criteria adopted. The

  13. The Exergetic, Environmental and Economic Effect of the Hydrostatic Design Static Pressure Level on the Pipe Dimensions of Low-Energy District Heating Networks

    DEFF Research Database (Denmark)

    Tol, Hakan İbrahim; Svendsen, Svend

    2013-01-01

    to be used in a low-energy DH network to carry the heat produced by renewable and/or low grade energy sources to low-energy Danish buildings. In this study, a comparison of various design considerations with different levels of maximum design static pressures was performed, and their results evaluated...... in terms of energetic, exergetic, economic, and environmental perspectives....

  14. Exergetic analysis of a double stage LiBr-H2O thermal compressor cooled by air/water and driven by low grade heat

    International Nuclear Information System (INIS)

    Izquierdo, M.; Venegas, M.; Garcia, N.; Palacios, E.

    2005-01-01

    In the present paper, an exergetic analysis of a double stage thermal compressor using the lithium bromide-water solution is performed. The double stage system considered allows obtaining evaporation temperatures equal to 5 deg. C using solar heat coming from flat plate collectors and other low grade thermal sources. In this study, ambient air and water are alternatively used as cooling fluids without crystallization problems up to condensation-absorption temperatures equal to 50 deg. C. The results obtained give the entropy generated, the exergy destroyed and the exergetic efficiency of the double stage thermal compressor as a function of the absorption temperature. The conclusions obtained show that the irreversibilities generated by the double stage thermal compressor will tend to increase with the absorption temperature up to 45 deg. C. The maximum value corresponds to 1.35 kJ kg -1 K -1 . The entropy generated and the exergy destroyed by the air cooled system are higher than those by the water cooled one. The difference between the values increases when the absorption temperature increases. For an absorption temperature equal to 50 deg. C, the air cooled mode generates 14% more entropy and destroys 14% more exergy than the water cooled one. Also, the results are compared with those of previous studies for single and double effect air cooled and water cooled thermal compressors. The conclusions show that the double stage system has about 22% less exergetic efficiency than the single effect one and 32% less exergetic efficiency than the double effect one

  15. Multi-objective optimization and exergetic-sustainability of an irreversible nano scale Braysson cycle operating with Ma

    Directory of Open Access Journals (Sweden)

    Mohammad H. Ahmadi

    2016-06-01

    Full Text Available Nano technology is developed in this decade and changes the way of life. Moreover, developing nano technology has effect on the performance of the materials and consequently improves the efficiency and robustness of them. So, nano scale thermal cycles will be probably engaged in the near future. In this paper, a nano scale irreversible Braysson cycle is studied thermodynamically for optimizing the performance of the Braysson cycle. In the aforementioned cycle an ideal Maxwell–Boltzmann gas is used as a working fluid. Furthermore, three different plans are used for optimizing with multi-objectives; though, the outputs of the abovementioned plans are assessed autonomously. Throughout the first plan, with the purpose of maximizing the ecological coefficient of performance and energy efficiency of the system, multi-objective optimization algorithms are used. Furthermore, in the second plan, two objective functions containing the ecological coefficient of performance and the dimensionless Maximum available work are maximized synchronously by utilizing multi-objective optimization approach. Finally, throughout the third plan, three objective functions involving the dimensionless Maximum available work, the ecological coefficient of performance and energy efficiency of the system are maximized synchronously by utilizing multi-objective optimization approach. The multi-objective evolutionary approach based on the non-dominated sorting genetic algorithm approach is used in this research. Making a decision is performed by three different decision makers comprising linear programming approaches for multidimensional analysis of preference and an approach for order of preference by comparison with ideal answer and Bellman–Zadeh. Lastly, analysis of error is employed to determine deviation of the outcomes gained from each plan.

  16. Exergetic analysis of a steam power plant using coal and rice straw in a co-firing process

    Energy Technology Data Exchange (ETDEWEB)

    Restrepo, Alvaro; Miyake, Raphael Guardini; Bazzo, Edson [Federal University of Santa Catarina (UFSC), Dept. of Mechanical Engineering, Florianopolis, SC (Brazil)], e-mails: arestrep@labcet.ufsc.br, miyake@labcet.ufsc.br, ebazzo@emc.ufsc.br; Bzuneck, Marcelo [Tractebel Energia S.A., Capivari de Baixo, SC (Brazil). U.O. Usina Termeletrica Jorge Lacerda C.], e-mail: marcelob@tractebelenergia.com.br

    2010-07-01

    This paper presents an exergetic analysis concerning an existing 50 M We steam power plant, which operates with pulverized coal from Santa Catarina- Brazil. In this power plant, a co-firing rice straw is proposed, replacing up to 10% of the pulverized coal in energy basis required for the boiler. Rice straw has been widely regarded as an important source for bio-ethanol, animal feedstock and organic chemicals. The use of rice straw as energy source for electricity generation in a co-firing process with low rank coal represents a new application as well as a new challenge to overcome. Considering both scenarios, the change in the second law efficiency, exergy destruction, influence of the auxiliary equipment and the greenhouse gases emissions such as CO{sub 2} and SO{sub 2} were considered for analysis. (author)

  17. Exergetic optimization of the part-flow evaporative gas turbine cycles. Paper no. IGEC-1-ID23

    International Nuclear Information System (INIS)

    Yari, M.; Sarabch, K.

    2005-01-01

    The evaporative gas turbine cycle is a new high efficiency power cycle that has reached the pilot plant testing stage. The latest configuration proposed for this cycle is known as part flow evaporative gas turbine cycle (PEvGT) in which humidification is combined with steam injection. Having advantages of both steam injected and humid air cycles, it is regarded as a very desirable plant for future. In this paper the exergy equations have been added to the mathematical model. Then exergy analysis and optimization of the PEvGT cycles: PEvGT and PEvGT-IC have been done. This study show that the maximum exergy destruction rate related to combustion chamber in both cycles. The exergetic optimization shows, the maximum first and second efficiency occur in the highest values of part-flow humidification rate. (author)

  18. Resource recovery from residual household waste: An application of exergy flow analysis and exergetic life cycle assessment

    DEFF Research Database (Denmark)

    Laner, David; Rechberger, Helmut; De Soete, Wouter

    2015-01-01

    Exergy is based on the Second Law of thermodynamics and can be used to express physical and chemical potential and provides a unified measure for resource accounting. In this study, exergy analysis was applied to four residual household waste management scenarios with focus on the achieved resource...... of the waste treatment system under investigation and (ii) exergetic life cycle assessment (LCA) using the Cumulative Exergy Extraction from the Natural Environment (CEENE) as a method for resource accounting. Scenario efficiencies of around 17-27% were found based on the exergy flow analysis (higher...... with the functionality of a material. In addition, the definition of appropriate waste system boundaries is critical for the exergy efficiencies derived from the flow analysis, as it is constrained by limited information available about the composition of flows in the system as well as about secondary production...

  19. Studying effect of heating plant parameters on performances of a geothermal-fuelled series cogeneration plant based on Organic Rankine Cycle

    International Nuclear Information System (INIS)

    Habka, Muhsen; Ajib, Salman

    2014-01-01

    Highlights: • We analyzed performances of a series ORC–CHP plant versus the heating plant parameters. • ORC–CHP power is destructed when raising the heat demand or the return temperature. • Only the high supply temperatures of the heating plant affect negatively the performances. • Reducing the return temperature optimizes both the energetic and exergetic criteria. • Increasing the heat demand improves the exergetic efficiency of the total CHP system. - Abstract: The present work aims to analyze the performance characteristics of the series Combined Heat and Power (CHP) system based on Organic Rankine Cycle (ORC) under influence of the heating plant parameters without considering the chemistry of the geothermal water considered as heat source. For evaluation, energetic and exergetic criteria along with the heat transfer capacities have been determined, and also the working fluid R134a has been used. The results showed that increasing the heat demand or the return temperature and only the high supply temperatures lead to destruct the net power generated by the ORC–CHP system. While, influence of the last parameters on the total exergy efficiency and losses is different; whereas raising the heat demands optimizes these exergetic indicators, variation of the supply temperature leads to an optimum for these performances. Since increasing the return temperature has purely negative impacts on all exergetic and energetic criteria, the latter can be improved by reducing this temperature with attention to the heat transfer capacities. Thus, reduction of the return temperature about 5 °C lowers the exhausted stream losses by app. 25% and enhances the power generation by app. 52% and the total exergy efficiency by 9%

  20. Exergetic analysis of a gas turbine plant with chemical recuperation; Analise exergetica de uma planta de turbina a gas com recuperacao quimica

    Energy Technology Data Exchange (ETDEWEB)

    Prieto, Mario G. Sanchez; Nebra, Silvia Azucena; Gallo, Waldir L. Ribeiro [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia]. E-mails: 192572rg@discovery.fem.unicamp.br; sanebra@fem.unicamp.br; wgallo@fem.unicamp.br

    2000-07-01

    One of the proposals that has been more recently analyzed with growing interest in Gas Turbine cycles, with the purpose of obtaining gains in the power output and thermal efficiency, is the Chemically Recuperated Gas Turbine Cycle, (CRGT). Such systems are equipped of chemical heat recovery components in which the waste heat in the turbine exhaust is used to convert a methane-steam mixture into a hydrogen-rich fuel in a methane steam reformer. One additional aspect of these cycles that represents a potential benefit is explained by the ultra-low NO{sub x} emission levels, even less than those system which use steam injection This paper, with the aid of the concepts emanated from the Second Thermodynamic Law, is presenting an evaluation of the exergetic performance of one installation of this type. Exergetic efficiencies are evaluated according to the relation fuel-product, considering one control volume for each component of the system. (author)

  1. Exergetic analysis of a double stage LiBr-H{sub 2}O thermal compressor cooled by air/water and driven by low grade heat

    Energy Technology Data Exchange (ETDEWEB)

    Izquierdo, M. [Instituto C.C. Eduardo Torroja (CSIC), Edificacion y Habitabilidad, Madrid (Spain); Venegas, M.; Garcia, N. [Universidad Carlos III de Madrid (Spain). Departamento de Ingenieria Termica y Fluidos; Palacios, E. [Universidad Politecnica de Madrid (Spain). Departamento de Mecanica Industrial

    2005-05-01

    In the present paper, an exergetic analysis of a double stage thermal compressor using the lithium bromide-water solution is performed. The double stage system considered allows obtaining evaporation temperatures equal to 5{sup o} C using solar heat coming from flat plate collectors and other low grade thermal sources. In this study, ambient air and water are alternatively used as cooling fluids without crystallization problems up to condensation-absorption temperatures equal to 50 {sup o}C. The results obtained give the entropy generated, the exergy destroyed and the exergetic efficiency of the double stage thermal compressor as a function of the absorption temperature. The conclusions obtained show that the irreversibilities generated by the double stage thermal compressor will tend to increase with the absorption temperature up to 45 {sup o}C. The maximum value corresponds to 1.35 kJ kg{sup -}1{sup K-1}. The entropy generated and the exergy destroyed by the air cooled system are higher than those by the water cooled one. The difference between the values increases when the absorption temperature increases. For an absorption temperature equal to 50 {sup o}C, the air cooled mode generates 14% more entropy and destroys 14% more exergy than the water cooled one. Also, the results are compared with those of previous studies for single and double effect air cooled and water cooled thermal compressors. The conclusions show that the double stage system has about 22% less exergetic efficiency than the single effect one and 32% less exergetic efficiency than the double effect one. (author)

  2. Pore size is a critical parameter for obtaining sustained protein release from electrochemically synthesized mesoporous silicon microparticles

    Directory of Open Access Journals (Sweden)

    Ester L. Pastor

    2015-10-01

    Full Text Available Mesoporous silicon has become a material of high interest for drug delivery due to its outstanding internal surface area and inherent biodegradability. We have previously reported the preparation of mesoporous silicon microparticles (MS-MPs synthesized by an advantageous electrochemical method, and showed that due to their inner structure they can adsorb proteins in amounts exceeding the mass of the carrier itself. Protein release from these MS-MPs showed low burst effect and fast delivery kinetics with complete release in a few hours. In this work, we explored if tailoring the size of the inner pores of the particles would retard the protein release process. To address this hypothesis, three new MS-MPs prototypes were prepared by electrochemical synthesis, and the resulting carriers were characterized for morphology, particle size, and pore structure. All MS-MP prototypes had 90 µm mean particle size, but depending on the current density applied for synthesis, pore size changed between 5 and 13 nm. The model protein α-chymotrypsinogen was loaded into MS-MPs by adsorption and solvent evaporation. In the subsequent release experiments, no burst release of the protein was detected for any prototype. However, prototypes with larger pores (>10 nm reached 100% release in 24–48 h, whereas prototypes with small mesopores (<6 nm still retained most of their cargo after 96 h. MS-MPs with ∼6 nm pores were loaded with the osteogenic factor BMP7, and sustained release of this protein for up to two weeks was achieved. In conclusion, our results confirm that tailoring pore size can modify protein release from MS-MPs, and that prototypes with potential therapeutic utility for regional delivery of osteogenic factors can be prepared by convenient techniques.

  3. Life cycle assessment (LCA) and exergetic life cycle assessment (ELCA) of the production of biodiesel from used cooking oil (UCO)

    International Nuclear Information System (INIS)

    Talens Peiro, L.; Lombardi, L.; Villalba Mendez, G.; Gabarrell i Durany, X.

    2010-01-01

    The paper assesses the life cycle of biodiesel from used cooking oil (UCO). Such life cycle involves 4 stages: 1) collection, 2) pre-treatment, 3) delivery and 4) transesterification of UCO. Generally, UCO is collected from restaurants, food industries and recycling centres by authorised companies. Then, UCO is pre-treated to remove solid particles and water to increase its quality. After that, it is charged in cistern trucks and delivered to the biodiesel facility to be then transesterified with methanol to biodiesel. The production of 1 ton of biodiesel is evaluated by a Life Cycle Assessment (LCA) to assess the environmental impact and by an Exergetic Life Cycle Assessment (ELCA) to account for the exergy input to the system. A detailed list of material and energy inputs is done using data from local companies and completed using Ecoinvent 1.2 database. The results show that the transesterification stage causes 68% of the total environmental impact. The major exergy inputs are uranium and natural gas. If targets set by the Spanish Renewable Energy Plan are achieved, the exergy input for producing biodiesel would be reduced by 8% in the present system and consequently environmental impacts and exergy input reduced up to 36% in 2010.

  4. Maximum Exergetic Efficiency Operation of a Solar Powered H2O-LiBr Absorption Cooling System

    Directory of Open Access Journals (Sweden)

    Camelia Stanciu

    2017-12-01

    Full Text Available A solar driven cooling system consisting of a single effect H2O-LiBr absorbtion cooling module (ACS, a parabolic trough collector (PTC, and a storage tank (ST module is analyzed during one full day operation. The pressurized water is used to transfer heat from PTC to ST and to feed the ACS desorber. The system is constrained to operate at the maximum ACS exergetic efficiency, under a time dependent cooling load computed on 15 July for a one storey house located near Bucharest, Romania. To set up the solar assembly, two commercial PTCs were selected, namely PT1-IST and PTC 1800 Solitem, and a single unit ST was initially considered. The mathematical model, relying on the energy balance equations, was coded under Engineering Equation Solver (EES environment. The solar data were obtained from the Meteonorm database. The numerical simulations proved that the system cannot cover the imposed cooling load all day long, due to the large variation of water temperature inside the ST. By splitting the ST into two units, the results revealed that the PT1-IST collector only drives the ACS between 9 am and 4:30 pm, while the PTC 1800 one covers the entire cooling period (9 am–6 pm for optimum ST capacities of 90 kg/90 kg and 90 kg/140 kg, respectively.

  5. Assessment of Selected Parameters of the Automatic Scarification Device as an Example of a Device for Sustainable Forest Management

    Directory of Open Access Journals (Sweden)

    Ryszard Tadeusiewicz

    2017-12-01

    Full Text Available Due to technological progress in forestry, seedlings with covered root systems—especially those grown in container nurseries—have become increasingly important in forest nursery production. One the trees that is most commonly grown this way is the common oak (Quercus robur L.. For an acorn to be sown in a container, it is necessary to remove its upper part during mechanical scarification, and evaluate its sowing suitability. At present, this is mainly done manually and by visual assessment. The low effectiveness of this method of acorn preparation has encouraged a search for unconventional solutions. One of them is the use of an automated device that consists of a computer vision-based module. For economic reasons related to the cost of growing seedlings in container nurseries, it is beneficial to minimize the contribution of unhealthy seeds. The maximum accuracy, which is understood as the number of correct seed diagnoses relative to the total number of seeds being assessed, was adopted as a criterion for choosing a separation threshold. According to the method proposed, the intensity and red components of the images of scarified acorns facilitated the best results in terms of the materials examined during the experiment. On average, a 10% inaccuracy of separation was observed. A secondary outcome of the presented research is an evaluation of the ergonomic parameters of the user interface that is attached to the unit controlling the device when it is running in its autonomous operation mode.

  6. Implementing of the multi-objective particle swarm optimizer and fuzzy decision-maker in exergetic, exergoeconomic and environmental optimization of a benchmark cogeneration system

    International Nuclear Information System (INIS)

    Sayyaadi, Hoseyn; Babaie, Meisam; Farmani, Mohammad Reza

    2011-01-01

    Multi-objective optimization for design of a benchmark cogeneration system namely as the CGAM cogeneration system is performed. In optimization approach, Exergetic, Exergoeconomic and Environmental objectives are considered, simultaneously. In this regard, the set of Pareto optimal solutions known as the Pareto frontier is obtained using the MOPSO (multi-objective particle swarm optimizer). The exergetic efficiency as an exergetic objective is maximized while the unit cost of the system product and the cost of the environmental impact respectively as exergoeconomic and environmental objectives are minimized. Economic model which is utilized in the exergoeconomic analysis is built based on both simple model (used in original researches of the CGAM system) and the comprehensive modeling namely as TTR (total revenue requirement) method (used in sophisticated exergoeconomic analysis). Finally, a final optimal solution from optimal set of the Pareto frontier is selected using a fuzzy decision-making process based on the Bellman-Zadeh approach and results are compared with corresponding results obtained in a traditional decision-making process. Further, results are compared with the corresponding performance of the base case CGAM system and optimal designs of previous works and discussed. -- Highlights: → A multi-objective optimization approach has been implemented in optimization of a benchmark cogeneration system. → Objective functions based on the environmental impact evaluation, thermodynamic and economic analysis are obtained and optimized. → Particle swarm optimizer implemented and its robustness is compared with NSGA-II. → A final optimal configuration is found using various decision-making approaches. → Results compared with previous works in the field.

  7. Avaliação exergética de processos psicrométricos Exergetic evaluation of psychrometric processes

    Directory of Open Access Journals (Sweden)

    Paulo Martins Leal

    2000-12-01

    the SIGEP's control volume. These variables, plus the local atmospheric pressure, were enough to determine the state of the air inlet and outlet, which made possible the energetic and exergetic analysis. It was possible to conclude that the methodology based on the evaluation through the First and Second Principle of Thermodynamics was technically viable on the analysis of psychrometric processes. It can be observed that energetic evaluation, in almost every process generated by the SIGEP, provided less rigorous criteria than exergetic analysis. It can be also concluded that the equipments attached to the SIGEP had a high level of irreversibility due to the fact they were designed to meet a specific psychrometric condition, regardless of the level of efficiency at that time.

  8. Comparison Based on Exergetic Analyses of Two Hot Air Engines: A Gamma Type Stirling Engine and an Open Joule Cycle Ericsson Engine

    Directory of Open Access Journals (Sweden)

    Houda Hachem

    2015-10-01

    Full Text Available In this paper, a comparison of exergetic models between two hot air engines (a Gamma type Stirling prototype having a maximum output mechanical power of 500 W and an Ericsson hot air engine with a maximum power of 300 W is made. Referring to previous energetic analyses, exergetic models are set up in order to quantify the exergy destruction and efficiencies in each type of engine. The repartition of the exergy fluxes in each part of the two engines are determined and represented in Sankey diagrams, using dimensionless exergy fluxes. The results show a similar proportion in both engines of destroyed exergy compared to the exergy flux from the hot source. The compression cylinders generate the highest exergy destruction, whereas the expansion cylinders generate the lowest one. The regenerator of the Stirling engine increases the exergy resource at the inlet of the expansion cylinder, which might be also set up in the Ericsson engine, using a preheater between the exhaust air and the compressed air transferred to the hot heat exchanger.

  9. Exergetic analysis of the heat pump installed in the Limmat school building in Zurich; Exergieanalyse der Waermepumpe im Schulhaus Limmat - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Friedl, M.

    2009-10-15

    In large buildings, heat pumps todays are only used in a small number of cases. In those rare cases, they are operated with synthetic working fluids and are mainly used for low temperature heating. Since January 2006, a heat pump with Propane as working fluid has been operating in a school building in Zuerich (Schulhaus Limmat), which provides space heating and hot water for the old building erected in 1909. As a heat source, a main channel of sewage is used, an ideal heat source, which is only rarely used nowadays. Hence, the installation has a pioneering role in many aspects and has been analysed in detail during the current project. During this project, the Propane heat pump in the Schulhaus Limmat as well as the hydraulic system have been analysed in respect to its exergetic losses. The heat pump has a seasonal performance factor of 2.7. The investigation has shown that the heat pump does not operate in an optimal way and that the hydraulic has room for improvement with respect to exergetic losses. In implementing the measures suggested in this report, the seasonal performance factor can be increased to about 4.4. (author)

  10. Exergetic assessment for resources input and environmental emissions by Chinese industry during 1997-2006.

    Science.gov (United States)

    Zhang, Bo; Peng, Beihua; Liu, Mingchu

    2012-01-01

    This paper presents an overview of the resources use and environmental impact of the Chinese industry during 1997-2006. For the purpose of this analysis the thermodynamic concept of exergy has been employed both to quantify and aggregate the resources input and the environmental emissions arising from the sector. The resources input and environmental emissions show an increasing trend in this period. Compared with 47568.7 PJ in 1997, resources input in 2006 increased by 75.4% and reached 83437.9 PJ, of which 82.5% came from nonrenewable resources, mainly from coal and other energy minerals. Furthermore, the total exergy of environmental emissions was estimated to be 3499.3 PJ in 2006, 1.7 times of that in 1997, of which 93.4% was from GHG emissions and only 6.6% from "three wastes" emissions. A rapid increment of the nonrenewable resources input and GHG emissions over 2002-2006 can be found, owing to the excessive expansion of resource- and energy-intensive subsectors. Exergy intensities in terms of resource input intensity and environmental emission intensity time-series are also calculated, and the trends are influenced by the macroeconomic situation evidently, particularly by the investment-derived economic development in recent years. Corresponding policy implications to guide a more sustainable industry system are addressed.

  11. Exergetic Assessment for Resources Input and Environmental Emissions by Chinese Industry during 1997–2006

    Directory of Open Access Journals (Sweden)

    Bo Zhang

    2012-01-01

    Full Text Available This paper presents an overview of the resources use and environmental impact of the Chinese industry during 1997–2006. For the purpose of this analysis the thermodynamic concept of exergy has been employed both to quantify and aggregate the resources input and the environmental emissions arising from the sector. The resources input and environmental emissions show an increasing trend in this period. Compared with 47568.7 PJ in 1997, resources input in 2006 increased by 75.4% and reached 83437.9 PJ, of which 82.5% came from nonrenewable resources, mainly from coal and other energy minerals. Furthermore, the total exergy of environmental emissions was estimated to be 3499.3 PJ in 2006, 1.7 times of that in 1997, of which 93.4% was from GHG emissions and only 6.6% from “three wastes” emissions. A rapid increment of the nonrenewable resources input and GHG emissions over 2002–2006 can be found, owing to the excessive expansion of resource- and energy-intensive subsectors. Exergy intensities in terms of resource input intensity and environmental emission intensity time-series are also calculated, and the trends are influenced by the macroeconomic situation evidently, particularly by the investment-derived economic development in recent years. Corresponding policy implications to guide a more sustainable industry system are addressed.

  12. Sustainable transformation

    DEFF Research Database (Denmark)

    Andersen, Nicolai Bo

    This paper is about sustainable transformation with a particular focus on listed buildings. It is based on the notion that sustainability is not just a question of energy conditions, but also about the building being robust. Robust architecture means that the building can be maintained and rebuilt......, that it can be adapted to changing functional needs, and that it has an architectural and cultural value. A specific proposal for a transformation that enhances the architectural qualities and building heritage values of an existing building forms the empirical material, which is discussed using different...... theoretical lenses. It is proposed that three parameters concerning the ꞌtransformabilityꞌ of the building can contribute to a more nuanced understanding of sustainable transformation: technical aspects, programmatic requirements and narrative value. It is proposed that the concept of ꞌsustainable...

  13. Exergetic analysis of cogeneration plants through integration of internal combustion engine and process simulators

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Leonardo de Oliveira [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)], E-mail: leonardo.carvalho@petrobras.com.br; Leiroz, Albino Kalab; Cruz, Manuel Ernani [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Mecanica], Emails: leiroz@mecanica.ufrj.br, manuel@mecanica.ufrj.br

    2010-07-01

    Internal combustion engines (ICEs) have been used in industry and power generation much before they were massively employed for transportation. Their high reliability, excellent power-to-weight ratio, and thermal efficiency have made them a competitive choice as main energy converters in small to medium sized power plants. Process simulators can model ICE powered energy plants with limited depth, due to the highly simplified ICE models used. Usually a better understanding of the global effects of different engine parameters is desirable, since the combustion process within the ICE is typically the main cause of exergy destruction in systems which utilize them. Dedicated commercial ICE simulators have reached such a degree of maturity, that they can adequately model a wide spectrum of phenomena that occur in ICEs. However, ICE simulators are unable to incorporate the remaining of power plant equipment and processes in their models. This paper presents and exploits the integration of an internal combustion engine simulator with a process simulator, so as to evaluate the construction of a fully coupled simulation platform to analyze the performance of ICE-based power plants. A simulation model of an actual cogeneration plant is used as a vehicle for application of the proposed computational methodology. The results show that by manipulating the engine mapping parameters, the overall efficiency of the plant can be improved. (author)

  14. Exergetic and Thermoeconomic Analyses of Solar Air Heating Processes Using a Parabolic Trough Collector

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Hernández-Román

    2014-08-01

    Full Text Available This paper presents a theoretical and practical analysis of the application of the thermoeconomic method. A furnace for heating air is evaluated using the methodology. The furnace works with solar energy, received from a parabolic trough collector and with electricity supplied by an electric power utility. The methodology evaluates the process by the first and second law of thermodynamics as the first step then the cost analysis is applied for getting the thermoeconomic cost. For this study, the climatic conditions of the city of Queretaro (Mexico are considered. Two periods were taken into account: from July 2006 to June 2007 and on 6 January 2011. The prototype, located at CICATA-IPN, Qro, was analyzed in two different scenarios i.e., with 100% of electricity and 100% of solar energy. The results showed that thermoeconomic costs for the heating process with electricity, inside the chamber, are less than those using solar heating. This may be ascribed to the high cost of the materials, fittings, and manufacturing of the solar equipment. Also, the influence of the mass flow, aperture area, length and diameter of the receiver of the solar prototype is a parameter for increasing the efficiency of the prototype in addition to the price of manufacturing. The optimum design parameters are: length is 3 to 5 m, mass flow rate is 0.03 kg/s, diameter of the receiver is around 10 to 30 mm and aperture area is 3 m2.

  15. The Exergetic, Environmental and Economic Effect of the Hydrostatic Design Static Pressure Level on the Pipe Dimensions of Low-Energy District Heating Networks

    Directory of Open Access Journals (Sweden)

    Hakan İbrahim Tol

    2013-01-01

    Full Text Available Low-Energy District Heating (DH systems, providing great energy savings by means of very low operating temperatures of 55 °C and 25 °C for supply and return respectively, were considered to be the 4th generation of the DH systems for a low-energy future. Low-temperature operation is considered to be used in a low-energy DH network to carry the heat produced by renewable and/or low grade energy sources to low-energy Danish buildings. In this study, a comparison of various design considerations with different levels of maximum design static pressures was performed, and their results evaluated in terms of energetic, exergetic, economic, and environmental perspectives.

  16. Exergetic and energetic comparison of LiCl-H_2O and LiBr-H_2O working pairs in a solar absorption cooling system

    International Nuclear Information System (INIS)

    Bellos, Evangelos; Tzivanidis, Christos; Antonopoulos, Kimon A.

    2016-01-01

    Highlights: • Two working pairs (LiCl-H_2O and LiBr-H_2O) are examined in a solar absorption chiller. • The examined single effect absorption chiller is driven by flat plate collectors. • The system is analyzed energetically and energetically for 3 ambient temperatures. • LiCl-H_2O performs better than LiBr-H_2O in all the examined cases. • The optimum operating temperature is lower for the case of pair LiCl-H_2O. - Abstract: The objective of this study is to investigate the use of an alternative working pair in a solar absorption cooling system. LiCl-H_2O is the new examined pair and it is compared energetically and exegetically with the conventional pair LiBr-H_2O, which is the most usual in air-conditioning applications. The simplest solar cooling system is analyzed in order to focus in the comparison between these working fluids. Specifically, flat plate collectors, coupled with a storage tank, feed the single effect absorption chiller which produces 250 kW cooling at 10 °C. The two pairs are examined parametrically for various heat source temperature levels and for three ambient temperature levels (25 °C, 30 °C and 35 °C). The minimization of the collecting area, which means maximum exergetic efficiency, is the optimization goal in every case. The final results show that LiCl-H_2O pair performs better in all cases by giving greater exergetic efficiency. More specifically, about 8% lower collecting area is required to cover the demanded cooling load with this working pair. Another interesting result is that the optimum heat source temperature for the LiCl-H_2O is roughly lower than the respective for the LiBr-H_2O. The system is analyzed in steady state with the commercial software Engineering Equator Solver (EES).

  17. Advanced thermodynamic (exergetic) analysis

    International Nuclear Information System (INIS)

    Tsatsaronis, G; Morosuk, T

    2012-01-01

    Exergy analysis is a powerful tool for developing, evaluating and improving an energy conversion system. However, the lack of a formal procedure in using the results obtained by an exergy analysis is one of the reasons for exergy analysis not being very popular among energy practitioners. Such a formal procedure cannot be developed as long as the interactions among components of the overall system are not being taken properly into account. Splitting the exergy destruction into unavoidable and avoidable parts in a component provides a realistic measure of the potential for improving the thermodynamic efficiency of this component. Alternatively splitting the exergy destruction into endogenous and exogenous parts provides information on the interactions among system components. Distinctions between avoidable and unavoidable exergy destruction on one side and endogenous and exogenous exergy destruction on the other side allow the engineer to focus on the thermodynamic inefficiencies that can be avoided and to consider the interactions among system components. The avoidable endogenous and the avoidable exogenous exergy destruction provide the best guidance for improving the thermodynamic performance of energy conversion systems.

  18. Exergetic Evaluation of Speed and Load Effects in Spark Ignition Engines Évaluation exergétique des effets de la vitesse et de la charge dans les moteurs àallumage par étincelle

    OpenAIRE

    Sezer I.; Bilgin A.

    2012-01-01

    This study investigates the effects of various operating conditions in spark ignition engines via an exergy analysis. A thermodynamic cycle model including compression, combustion and expansion processes was used for investigation. Induction and exhaust processes were computed with a simple approximation method. The principles of the second law were applied to the cycle model to perform the exergy analysis. Exergetic variables, i.e., the exergy transfers with heat and work, irreversibili...

  19. Energetic and exergetic analysis of cogeneration power combined cycle and ME-TVC-MED water desalination plant: Part-1 operation and performance

    International Nuclear Information System (INIS)

    Almutairi, Abdulrahman; Pilidis, Pericles; Al-Mutawa, Nawaf; Al-Weshahi, Mohammed

    2016-01-01

    Highlights: • Develop a comprehensive model for a very advanced cogeneration plant using real data. • Evaluate ME-TVC-MED unit using the latest thermodynamic properties of seawater. • Evaluate the desalination unit contribution to the overall efficiency. • Evaluate the stage exergetic efficiency in the ME-TVC-MED unit. • Numerous possibilities have been suggested to improve the proposed system. - Abstract: A comprehensive model of cogeneration plant for electrical power and water desalination has been developed based on energetic and exergetic analyses using real operational data. The power side is a combined cycle power plant (CCPP), while the desalination side is a multi-effect thermal vapour compression plant coupled with a conventional multi-effect plant (ME-TVC-MED). IPSEpro software was utilized to model the process, which shows good agreement with the manufacturer's data and published research. The thermodynamic properties of saline water were obtained from the latest published data in the literature. The performance of the cogeneration plant was examined for different ambient temperatures, pressure ratios, loads, feed water temperatures, number of effects and entrainment ratios. The results show that gas turbine engines produce the highest level of useful work in the system at around 34% of the total fuel input. At the same time, they constitute a major source of irreversibility, which accounts for 84% of the total exergy destruction in the plant, while the lowest source of irreversibility is in the steam turbine of 3.3% due to the type of working fluid and reheating system. In the ME-TVC-MED desalination unit, the highest source of irreversibilities occurs in the effects and in the thermo-compressor. The first two effects in the ME-TVC parallel section were responsible for about 40.6% of the total effect exergy destruction, which constitutes the highest value among all the effects. Operating the system at full load while reducing ambient

  20. Grassland Sustainability

    Science.gov (United States)

    Deborah U. Potter; Paulette L. Ford

    2004-01-01

    In this chapter we discuss grassland sustainability in the Southwest, grassland management for sustainability, national and local criteria and indicators of sustainable grassland ecosystems, and monitoring for sustainability at various scales. Ecological sustainability is defined as: [T]he maintenance or restoration of the composition, structure, and processes of...

  1. The influence of spray-drying parameters on phase behavior, drug distribution, and in vitro release of injectable microspheres for sustained release.

    Science.gov (United States)

    Meeus, Joke; Lenaerts, Maité; Scurr, David J; Amssoms, Katie; Davies, Martyn C; Roberts, Clive J; Van Den Mooter, Guy

    2015-04-01

    For ternary solid dispersions, it is indispensable to characterize their structure, phase behavior, and the spatial distribution of the dispersed drug as this might influence the release profile and/or stability of these formulations. This study shows how formulation (feed concentration) and process (feed rate, inlet air temperature, and atomizing air pressure) parameters can influence the characteristics of ternary spray-dried solid dispersions. The microspheres considered here consist of a poly(lactic-co-glycolic acid) (PLGA) surface layer and an underlying polyvinylpyrrolidone (PVP) phase. A poorly soluble active pharmaceutical ingredient (API) was molecularly dispersed in this matrix. Differences were observed in component miscibility, phase heterogeneity, particle size, morphology, as well as API surface coverage for selected spray-drying parameters. Observed differences are likely because of changes in the droplet generation, evaporation, and thus particle formation processes. However, varying particle characteristics did not influence the drug release of the formulations studied, indicating the robustness of this approach to produce particles of consistent drug release characteristics. This is likely because of the fact that the release is dominated by diffusion from the PVP layer through pores in the PLGA surface layer and that observed differences in the latter have no influence on the release. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  2. Sensitivity of reentrant driver localization to electrophysiological parameter variability in image-based computational models of persistent atrial fibrillation sustained by a fibrotic substrate

    Science.gov (United States)

    Deng, Dongdong; Murphy, Michael J.; Hakim, Joe B.; Franceschi, William H.; Zahid, Sohail; Pashakhanloo, Farhad; Trayanova, Natalia A.; Boyle, Patrick M.

    2017-09-01

    Atrial fibrillation (AF) is the most common sustained cardiac arrhythmia, causing morbidity and mortality in millions worldwide. The atria of patients with persistent AF (PsAF) are characterized by the presence of extensive and distributed atrial fibrosis, which facilitates the formation of persistent reentrant drivers (RDs, i.e., spiral waves), which promote fibrillatory activity. Targeted catheter ablation of RD-harboring tissues has shown promise as a clinical treatment for PsAF, but the outcomes remain sub-par. Personalized computational modeling has been proposed as a means of non-invasively predicting optimal ablation targets in individual PsAF patients, but it remains unclear how RD localization dynamics are influenced by inter-patient variability in the spatial distribution of atrial fibrosis, action potential duration (APD), and conduction velocity (CV). Here, we conduct simulations in computational models of fibrotic atria derived from the clinical imaging of PsAF patients to characterize the sensitivity of RD locations to these three factors. We show that RDs consistently anchor to boundaries between fibrotic and non-fibrotic tissues, as delineated by late gadolinium-enhanced magnetic resonance imaging, but those changes in APD/CV can enhance or attenuate the likelihood that an RD will anchor to a specific site. These findings show that the level of uncertainty present in patient-specific atrial models reconstructed without any invasive measurements (i.e., incorporating each individual's unique distribution of fibrotic tissue from medical imaging alongside an average representation of AF-remodeled electrophysiology) is sufficiently high that a personalized ablation strategy based on targeting simulation-predicted RD trajectories alone may not produce the desired result.

  3. Sustainable Food & Sustainable Economics

    OpenAIRE

    Alvarez, Mavis Dora

    2012-01-01

    Cuba today is immersed in a very intense process of perfecting its agricultural production structures with the goal of making them more efficient and sustainable in their economic administration and in their social and environmental management. Agricultural cooperatives in Cuba have the responsibility of producing on 73% of the country's farmland. Their contributions are decisive to developing agricultural production and to ensuring more and better food for the population, in addition to redu...

  4. Using an energetic and exergetic life cycle analysis to assess the best applications of legumes within a biobased economy

    International Nuclear Information System (INIS)

    Brehmer, Ben; Struik, Paul C.; Sanders, Johan

    2008-01-01

    In symbiosis with bacteria, legumes are able to biologically fix nitrogen from the atmosphere and therefore require less artificial nitrogen fertilizer. As the manufacturing of nitrogen fertilizers demands a lot of process energy, growing legumes may give large overall energy savings. The reduction of nitrogen fertilizer, however, gives a yield loss as the carbon-to-nitrogen efficiency is lower for inoculation than for the synthetic process. When brought into the realm of biomass for bioenergy, the energy savings obtained through less fertilizer input must be balanced with the loss of potential yield output. Twelve popular choice crops (including two legumes, two crops grown in mixture with legumes and one crop associated with mycorrhiza) were chosen to investigate the relationship between solar radiation input, fertilizer input and the resulting potential bioenergy output. A cradle-to-factory gate assessment was performed with cumulative energy and exergy values as the main indicators. The trade-off between lower fertilizer energy inputs to utilized solar radiation was assessed. Combined they relate to the land use efficiency, basically the energy relations per hectare. Our analysis shows that legumes do not present energy savings and do not contribute to sustainability when grown as bioenergy crops. The benefits of nitrogen fixation by legumes should be carefully assessed and best utilized within the emerging sector of non-food applications

  5. Parametric and exergetic analysis of waste heat recovery system based on thermoelectric generator and organic rankine cycle utilizing R123

    International Nuclear Information System (INIS)

    Shu, Gequn; Zhao, Jian; Tian, Hua; Liang, Xingyu; Wei, Haiqiao

    2012-01-01

    The paper analyzes the combined TEG-ORC (thermoelectric generator and organic rankine cycle) used in exhaust heat recovery of ICE (internal combustion engine) theoretically. A theoretical model is proposed to calculate the optimal parameters of the bottoming cycle based on thermodynamic theory when net output power and volumetric expansion ratio are selected as objective functions, which affect system performance and size. The effects of relative TEG flow direction, TEG scale, highest temperature, condensation temperature, evaporator pressure and efficiency of IHE (internal heat exchanger) on system performance are investigated. R123 is chosen among the fluids whose decomposition temperature exceeds 600 K to avoid fluid resolving and resulting in wet stroke when expansion process ends. The thermodynamic irreversibility that occurs in evaporator, turbine, IHE, condenser, pump and TEG is revealed at target working areas. The results indicate a significant increase of system performance when TEG and IHE are combined with ORC bottoming cycle. It is also suggested that TEG-ORC system is suitable to recovering waste heat from engines, because TEG can extend the temperature range of heat source and thereby improve the security and fuel economy of engines. -- Highlights: ► Development of a TEG-ORC system using R123 as working fluid for WHR of engines. ► Performance of the developed cycle was investigated theoretically. ► Optimization of configurations and parameters can be obtained. ► Irreversibility in the evaporator, turbine, IHE, condenser, pump and TEG is revealed. ► Optimal net power and indicated efficiency is 27 kW and 45.7%, respectively.

  6. Análisis exergético comparativo entre intercambiadores de calor // A comparative exergetic analysis of compact heat exchangers

    Directory of Open Access Journals (Sweden)

    Rubén Borrajo-Pérez

    2011-08-01

    Full Text Available Los intercambiadores de calor son equipos de importancia primordial en la industria y enaplicaciones domésticas en general. El trabajo está relacionado con el area de la intensificacion de latransferencia de calor en intercambiadores de calor compactos y la comparación entre diferentestipos de superficies intensificadas. La comparación es realizada a partir del análisis de la exergíadestruída por la superfície de intercambio como resultado de las perdidas por fricción y delintercambio térmico entre cuerpos con diferencia finita de temperaturas. El análisis de Segunda Leyde la Termodinámica permite identificar en que superfície de intercambio se genera mas entropía.Como resultado fundamental se obtiene la dependencia entre la exergía destruída y elespaciamiento transversal para una superfície formada por una fila de tubos elipticos a diferentesvalores del numero de Reynolds. Se identifica al intercambio térmico como la de mayor aporte a laentropía generada. Finalmente se demuestra la viabilidad de la intensificación de la transferencia decalor empleando generadores de vórtices en intercambiadores de calor.Palabras claves: generadores de vórtices, intecambiadores de calor compactos, tubos elípticos, exergía.__________________________________________________________________AbstractThe heat exchangers are important devices in both industry and household applications. This work isabout heat transfer enhancement in heat exchangers surface. Many heat transfer enhancementtechniques can be applied and then a comparative tool is needed to evaluate its performance.Thermodynamics is one of these tools and the exergetic analysis can be applied to heat exchangersurfaces. The exergy destroyed because both of thermal exchange between bodies with differenttemperatures and destroyed by friction drag is calculated. These results are used to compare heatexchanger surfaces. Heat exchanger surfaces in smooth configuration and the same surfaces

  7. Sustainable Marketing

    NARCIS (Netherlands)

    Dam, van Y.K.

    2017-01-01

    In this article, three different conceptions of sustainable marketing are discussed and compared. These different conceptions are referred to as social, green, and critical sustainable marketing. Social sustainable marketing follows the logic of demand-driven marketing management and places the

  8. Energetic and exergetic efficiency modeling of a cargo aircraft by a topology improving neuro-evolution algorithm

    International Nuclear Information System (INIS)

    Baklacioglu, Tolga; Aydin, Hakan; Turan, Onder

    2016-01-01

    An aircraft is a complex system that requires methodologies for an efficient thermodynamic design process. So, it is important to gain a deeper understanding of energy and exergy use throughout an aircraft. The aim of this study is to propose a topology improving NE (neuro-evolution) algorithm modeling for assessing energy and exergy efficiency of a cargo aircraft for the phases of a flight. In this regard, energy and exergy data of the aircraft achieved from several engine runs at different power settings have been utilized to derive the ANN (artificial neural network) models optimized by a GA (genetic algorithm). NE of feed-forward networks trained by a BP (backpropagation) algorithm with momentum has assured the accomplishment of optimum initial network weights as well as the improvement of the network topology. The linear correlation coefficients very close to unity obtained for the derived ANN models have proved the tight fitting of the real data and the estimated values of the efficiencies provided by the models. Finally, compared to the trial-and-error case, evolving the networks by GAs has enhanced the accuracy of the modeling simply further as the reduction in the MSE (mean squared errors) for the energy and exergy efficiencies indicates. - Highlights: • Optimization using neuro-evolution algorithm. • Improved backpropagation algorithm using momentum factor. • Turboprop parameters as independent variables. • Energy and exergy efficiency modeling of a cargo aircraft.

  9. Assessing the Robustness of Thermoeconomic Diagnosis of Fouled Evaporators: Sensitivity Analysis of the Exergetic Performance of Direct Expansion Coils

    Directory of Open Access Journals (Sweden)

    Antonio Piacentino

    2016-03-01

    Full Text Available Thermoeconomic diagnosis of refrigeration systems is a pioneering approach to the diagnosis of malfunctions, which has been recently proven to achieve good performances for the detection of specific faults. Being an exergy-based diagnostic technique, its performance is influenced by the trends of exergy functions in the “design” and “abnormal” conditions. In this paper the sensitivity of performance of thermoeconomic diagnosis in detecting a fouled direct expansion coil and quantifying the additional consumption it induces is investigated; this fault is critical due to the simultaneous air cooling and dehumidification occurring in the coil, that induce variations in both the chemical and thermal fractions of air exergy. The examined parameters are the temperature and humidity of inlet air, the humidity of reference state and the sensible/latent heat ratio (varied by considering different coil depths. The exergy analysis reveals that due to the more intense dehumidification occurring in presence of fouling, the exergy efficiency of the evaporator coil eventually increases. Once the diagnostic technique is based only on the thermal fraction of air exergy, the results suggest that the performance of the technique increases when inlet air has a lower absolute humidity, as evident from the “optimal performance” regions identified on a psychrometric chart.

  10. Exergetic and economic comparison of ORC and Kalina cycle for low temperature enhanced geothermal system in Brazil

    International Nuclear Information System (INIS)

    Campos Rodríguez, Carlos Eymel; Escobar Palacio, José Carlos; Venturini, Osvaldo J.; Silva Lora, Electo E.; Cobas, Vladimir Melián; Marques dos Santos, Daniel; Lofrano Dotto, Fábio R.; Gialluca, Vernei

    2013-01-01

    This paper deals with the thermodynamic analysis, of both the first and second law of thermodynamic of two different technologies, (ORC and Kalina cycle) for power production through an enhanced geothermal system (EGS). In order to find a better performance of both thermal cycles it were evaluated 15 different working fluids for ORC and three different composition of the ammonia–water mixture for the Kalina cycle. In this work, the Aspen-HYSYS software was used to simulate both thermal cycles and to calculate the thermodynamic properties based on Peng–Robinson Stryjek–Vera (PRSV) Equation of State (EoS). At the end the two cycles was compared using an economic analysis with the fluid that offers the best performance for each thermal cycle which are R-290 for ORC and for Kalina cycle a composition of the mixture of 84% of ammonia mass fraction and 16% of water mass fraction. For this conditions the Kalina cycle produce 18% more net power than the ORC. A levelized electricity costs of 0.22 €/kW h was reached for ORC and 0.18 €/kW h for Kalina cycle. Finally a sensitivity analysis of the EGS LCOE was carried out for a few economic parameters to determinate how is the variation of LCOE for a % change from the base case. -- Highlights: ► The aim of this paper is to compare both cycles (ORC and Kalina). ► Kalina cycle offer 18% more net power than ORC and require 37% less mass flow rate. ► It was obtained 17.8% lower levelized electricity costs for Kalina cycle over the ORC

  11. Exergetic and economic comparison of ORC and Kalina cycle for low temperature enhanced geothermal system in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Campos Rodríguez, Carlos Eymel, E-mail: eymelcampos@hotmail.com [Federal University of Itajuba (UNIFEI), Mechanical Engineering Institute – IEM, Excellence Group in Thermal Power and Distributed Generation (NEST), Minas Gerais (Brazil); Escobar Palacio, José Carlos; Venturini, Osvaldo J.; Silva Lora, Electo E.; Cobas, Vladimir Melián [Federal University of Itajuba (UNIFEI), Mechanical Engineering Institute – IEM, Excellence Group in Thermal Power and Distributed Generation (NEST), Minas Gerais (Brazil); Marques dos Santos, Daniel, E-mail: danielmarques.Santos@aes.com [AES Tietê, Bauru, São Paulo (Brazil); Lofrano Dotto, Fábio R., E-mail: fabio@farolconsultoria.com.br [FAROL Pesquisa, Desenvolvimento e Consultoria (Brazil); Gialluca, Vernei [Gênera Serviços e Comércio LTDA (Brazil)

    2013-04-05

    This paper deals with the thermodynamic analysis, of both the first and second law of thermodynamic of two different technologies, (ORC and Kalina cycle) for power production through an enhanced geothermal system (EGS). In order to find a better performance of both thermal cycles it were evaluated 15 different working fluids for ORC and three different composition of the ammonia–water mixture for the Kalina cycle. In this work, the Aspen-HYSYS software was used to simulate both thermal cycles and to calculate the thermodynamic properties based on Peng–Robinson Stryjek–Vera (PRSV) Equation of State (EoS). At the end the two cycles was compared using an economic analysis with the fluid that offers the best performance for each thermal cycle which are R-290 for ORC and for Kalina cycle a composition of the mixture of 84% of ammonia mass fraction and 16% of water mass fraction. For this conditions the Kalina cycle produce 18% more net power than the ORC. A levelized electricity costs of 0.22 €/kW h was reached for ORC and 0.18 €/kW h for Kalina cycle. Finally a sensitivity analysis of the EGS LCOE was carried out for a few economic parameters to determinate how is the variation of LCOE for a % change from the base case. -- Highlights: ► The aim of this paper is to compare both cycles (ORC and Kalina). ► Kalina cycle offer 18% more net power than ORC and require 37% less mass flow rate. ► It was obtained 17.8% lower levelized electricity costs for Kalina cycle over the ORC.

  12. Evaluación exergética de propuestas de disminución de consumo de vapor en usinas azucareras Exergetic evaluation of proposals for steam consumption reduction in sugar factories

    Directory of Open Access Journals (Sweden)

    Dora Paz

    2005-12-01

    Full Text Available Se realizó un modelado exergético, basado en la 2° ley de la Termodinámica, para la evaluación de las operaciones térmicas de Calentamiento-Evaporación-Cristalización (CEC en un ingenio de Tucumán. Una vez resueltos los balances de masa y energía de sistemas CEC, se determinaron los balances de exergía, evaluando las pérdidas de exergía y la eficiencia exergética. Se emplearon ecuaciones y gráficos existentes en la bibliografía para evaluar las propiedades termodinámicas de los flujos intervinientes. Se simularon y compararon con el caso base (zafra 2000, dos propuestas tendientes a disminuir las pérdidas de exergía, considerando: aumento de efectos de evaporación, mayor aprovechamiento de vapores vegetales, aumento en la concentración de melado, empleo de vapor vegetal para la cristalización y reemplazo de turbinas de vapor ineficientes por motores oleohidráulicos y eléctricos. Los resultados mostraron que las menores eficiencias exergéticas se producen en condensadores barométricos de cristalización y evaporación, y en cristalización. La reducción de irreversibilidades en las propuestas analizadas permitiría eliminar el combustible adicional necesario para operar calderas bagaceras antiguas.Exergetic modelling, based on exergetic analysis (2nd law of Thermodynamics, was applied in assessing Heating-Evaporation-Crystallization (H-E-C thermal operations in a cane sugar mill in Tucumán (Argentina. After solving mass and energy balances in H-E-C systems, exergy balance was determined. Exergy losses and exergetic efficiency were calculated. Equations and graphics found in bibliographic sources were used to calculate thermodynamic properties of intervening flows. Two alternatives for reducing exergy losses were simulated and compared with base case (2000 season. These alternatives aimed at the following goals: more evaporation effects, better use of juice vapours, increase in syrup concentration, and replacement of

  13. Rethinking exergy efficiency in favor of exergy sustainability as a criteria for design. Paper no. IGEC-1-ID12

    International Nuclear Information System (INIS)

    Seager, T.P.

    2005-01-01

    'Full text:' Engineering design in power generation or conversion has typically focused on minimizing exergy losses (entropy gains), or maximizing economic returns. Both entropy minimization and profit maximization are readily obtainable and acceptable objective criteria for design of thermodynamic processes. However, alternative criteria are imaginable. This research presents a framework for considering minimal environmental impact or maximum renewability as alternative design criteria. In the environmental case, fuel source is based upon an exergetic environmental metric called pollution potential. In the case of renewability, a life-cycle metric describing the replacement time frame of the fuel source is employed. When coupled, the two metrics together partially assess the overall sustainability of the design. (author)

  14. Performance Assessment of a Hybrid Solar-Geothermal Air Conditioning System for Residential Application: Energy, Exergy, and Sustainability Analysis

    Directory of Open Access Journals (Sweden)

    Yasser Abbasi

    2016-01-01

    Full Text Available This paper investigates the performance of a ground source heat pump that is coupled with a photovoltaic system to provide cooling and heating demands of a zero-energy residential building. Exergy and sustainability analyses have been conducted to evaluate the exergy destruction rate and SI of different compartments of the hybrid system. The effects of monthly thermal load variations on the performance of the hybrid system are investigated. The hybrid system consists of a vertical ground source heat exchanger, rooftop photovoltaic panels, and a heat pump cycle. Exergetic efficiency of the solar-geothermal heat pump system does not exceed 10 percent, and most exergy destruction takes place in photovoltaic panel, condenser, and evaporator. Although SI of PV system remains constant during a year, SI of GSHP varies depending on cooling and heating mode. The results also show that utilization of this hybrid system can reduce CO2 emissions by almost 70 tons per year.

  15. Sustainable Disruptions

    DEFF Research Database (Denmark)

    Friis, Silje Alberthe Kamille; Kjær, Lykke Bloch

    2016-01-01

    Since 2012 the Sustainable Disruptions (SD) project at the Laboratory for Sustainability at Design School Kolding (DK) has developed and tested a set of design thinking tools, specifically targeting the barriers to economically, socially, and environmentally sustainable business development....... The tools have been applied in practice in collaboration with 11 small and medium sized companies (SMEs). The study investigates these approaches to further understand how design thinking can contribute to sustainable transition in a business context. The study and the findings are relevant to organizations...... invested in the issue of sustainable business development, in particular the leaders and employees of SMEs, but also to design education seeking new ways to consciously handle and teach the complexity inherent in sustainable transformation. Findings indicate that the SD design thinking approach contributes...

  16. Computational sustainability

    CERN Document Server

    Kersting, Kristian; Morik, Katharina

    2016-01-01

    The book at hand gives an overview of the state of the art research in Computational Sustainability as well as case studies of different application scenarios. This covers topics such as renewable energy supply, energy storage and e-mobility, efficiency in data centers and networks, sustainable food and water supply, sustainable health, industrial production and quality, etc. The book describes computational methods and possible application scenarios.

  17. Sustainable Universities

    DEFF Research Database (Denmark)

    Grindsted, Thomas Skou

    2011-01-01

    Declarations on Sustainability in Higher Education (SHE) can be viewed as a piece of international regulation. Over the past 30 years research at universities has produced convincing data to warn about deterioration of the environment, resource scarcity and the need for sustainability. This in turn....... Declarations tend to have impact on three trends. Firstly, there is emerging international consensus on the university’s role and function in relation to sustainable development; secondly, the emergence of national legislation, and thirdly, an emerging international competition to be leader in sustainable...

  18. Sustainable Transition

    DEFF Research Database (Denmark)

    Hansen, Ole Erik; Søndergård, Bent

    2014-01-01

    of agendas/vision, technologies, actors and institutions in the emergent design of an urban mobility system based on an electric car sharing system. Why. Designing for sustainability is a fundamental challenge for future design practices; designers have to obtain an ability to contribute to sustainable...

  19. Sustainable transformation

    DEFF Research Database (Denmark)

    Andersen, Nicolai Bo

    This paper is about sustainable transformation with a particular focus on listed buildings. It is based on the notion that sustainability is not just a question of energy conditions, but also about the building being robust. Robust architecture means that the building can be maintained and rebuil...

  20. Sustainability Labeling

    NARCIS (Netherlands)

    Dam, van Y.K.

    2017-01-01

    Sustainability labeling originated from a need to protect the identity of alternative systems of food production and to increase market transparency. From the 1980s onwards sustainability labeling has changed into a policy instrument replacing direct government regulation of the food market, and a

  1. Afterschool Sustainability

    Directory of Open Access Journals (Sweden)

    Hilary D. Joyce

    2014-12-01

    Full Text Available Youth participation in quality extended learning opportunities (ELOs results in positive academic, physical, mental health, and social/emotional outcomes. Funding is essential to implementing and sustaining quality ELOs; however multiple funding barriers and challenges exist. Understanding the types of funds available for ELOs and the factors that influence sustainability is critical. Through surveys and telephone interviews of ELO providers, this descriptive study identified and examined ELO funding streams, the ways ELO providers use these funding streams, and the barriers and challenges to sustainability. ELO programs often relied on one major funding stream coupled with nutrition supports as well as in-kind resources. Barriers to sustainability included year-to-year funding, transportation costs, reducing community partnerships, and difficulty in diversifying funds. Recommendations to enhance ELO sustainability are offered, particularly in relation to overcoming the challenges to diversification of funding resources and establishing mutually supportive partnerships and collaboration.

  2. Sustainable Cities

    DEFF Research Database (Denmark)

    Georg, Susse; Garza de Linde, Gabriela Lucía

    Judging from the number of communities and cities striving or claiming to be sustainable and how often eco-development is invoked as the means for urban regeneration, it appears that sustainable and eco-development have become “the leading paradigm within urban development” (Whitehead 2003....../assessment tool. The context for our study is urban regeneration in one Danish city, which had been suffering from industrial decline and which is currently investing in establishing a “sustainable city”. Based on this case study we explore how the insights and inspiration evoked in working with the tool...

  3. Sustainable Transportation

    DEFF Research Database (Denmark)

    Hall, Ralph P.; Gudmundsson, Henrik; Marsden, Greg

    2014-01-01

    The transportation system is the backbone of economic and social progress and the means by which humans access goods and services and connect with one another. Yet, as the scale of transportation activities has grown worldwide, so too have the negative environmental, social, and economic impacts...... that relate to the construction and maintenance of transportation infrastructure and the operation or use of the different transportation modes. The concept of sustainable transportation emerged in response to these concerns as part of the broader notion of sustainable development. Given the transportation...... sector’s significant contribution to global challenges such as climate change, it is often said that sustainable development cannot be achieved without sustainable transportation....

  4. Agriculture: Sustainability

    Science.gov (United States)

    Sustainability creates and maintains the conditions under which humans and nature can exist in productive harmony, that permit fulfilling the food, feed, and fiber needs of our country and the social, economic and other requirements.

  5. Sustainable consumption

    DEFF Research Database (Denmark)

    Prothero, Andrea; Dobscha, Susan; Freund, Jim

    2011-01-01

    This essay explores sustainable consumption and considers possible roles for marketing and consumer researchers and public policy makers in addressing the many sustainability challenges that pervade our planet. Future research approaches to this interdisciplinary topic need to be comprehensive...... and systematic and will benefit from a variety of different perspectives. There are a number of opportunities for future research, and three areas are explored in detail. First, the essay considers the inconsistency between the attitudes and behaviors of consumers with respect to sustainability; next, the agenda...... is broadened to explore the role of individual citizens in society; and finally, a macro institutional approach to fostering sustainability is explored. Each of these areas is examined in detail and possible research avenues and public policy initiatives are considered within each of these separate...

  6. Sustainable Futures

    Science.gov (United States)

    Sustainable Futures is a voluntary program that encourages industry to use predictive models to screen new chemicals early in the development process and offers incentives to companies subject to TSCA section 5.

  7. Sustainability reporting

    NARCIS (Netherlands)

    Kolk, A.

    2005-01-01

    This article gives an overview of developments in sustainability (also sometimes labelled corporate social responsibility) reporting. The article will first briefly indicate how accountability on social and environmental issues started, already in the 1970s when social reports were published.

  8. Sustainable Consumption

    DEFF Research Database (Denmark)

    Røpke, Inge

    2015-01-01

    The intention of this chapter is to explore the role of consumption and consumers in relation to sustainability transition processes and wider systemic transformations. In contrast to the individualistic focus in much research on sustainable consumption, the embeddedness of consumption activities...... in wider social, economic and technological frameworks is emphasised. In particular, the chapter is inspired by practice theory and transition theory. First, various trends in consumption are outlined to highlight some of the challenges for sustainability transitions. Then, it is discussed how consumption...... patterns are shaped over time and what should be considered in sustainability strategies. While discussions on consumption often take their point of departure in the perspective of the individual and then zoom to the wider context, the present approach is the opposite. The outline starts with the basic...

  9. Stabilizing Sustainability

    DEFF Research Database (Denmark)

    Reitan Andersen, Kirsti

    The publication of the Brundtland Report in 1987 put the topic of sustainable development on the political and corporate agenda. Defining sustainable development as “a development that meets the needs of the future without compromising the ability of future generations to meet their own needs......” (WCED, 1987, p. 43), the Report also put a positive spin on the issue of sustainability by upholding capitalist beliefs in the possibility of infinite growth in a world of finite resources. While growth has delivered benefits, however, it has done so unequally and unsustainably. This thesis focuses...... on the textile and fashion industry, one of the world’s most polluting industries and an industry to some degree notorious for leading the ‘race to the bottom’ in global labour standards. Despite being faced with increasing demands to practise sustainability, most textile and fashion companies continue to fail...

  10. Seeking Sustainability

    OpenAIRE

    Clive L. Spash

    2014-01-01

    What does sustainability research do to help the environment? One might well wonder when observing the annual conference season with various academics and professors in sustainability science, ecological economics or environmental ethics driving to the airport to fly off to international meetings to discuss how bad things are getting, what should been done about it, and how time is running out for action. In fact, singling out a few academic groups is highly unfair because the link between pr...

  11. Local Sustainability

    International Nuclear Information System (INIS)

    Carrizosa Umana, Julio

    1998-01-01

    The current polemic about the possibilities of sustainable development has led to a renovated interest for the topic of the sustainability of the communities and the local sustainability. In front of the global sustainability whose conditions have been exposed by systemic ecologists and for macro economists, the sustainability of specific places arises in the planet whose conditions are object of study of the ecology of landscapes, of the ecological economy, of the cultural anthropology, of the environmental sociology and naturally, of the integral environmentalism. In this discussion the Colombian case charges unusual interest to be one of the few countries of Latin America, where a very dense net of municipalities exists, each one with its urban helmet and with a position and some functions defined by the political constitution of the nation. This net of municipalities and of urban helmets it also constitutes net of alternative to the current macro-cephalic situation. As well as Bogota grew, in a hundred years, of less than a hundred thousand inhabitants to six million inhabitants, each one of these municipalities contains a potential of growth that depends on the characteristics of its ecological, social, economic and politic sustainability

  12. Sustainable markets for sustainable energy

    Energy Technology Data Exchange (ETDEWEB)

    Millan, J.; Smyser, C.

    1997-12-01

    The author discusses how the Inter-American Development Bank (IDB) is involved in sustainable energy development. It presently has 50 loans and grants for non conventional renewable energy projects and ten grants for efficiency programs for $600 and $17 million respectively, representing 100 MW of power. The IDB is concerned with how to create a sustainable market for sustainable energy projects. The IDB is trying to work with government, private sector, NGOs, trading allies, credit sources, and regulators to find proper roles for such projects. He discusses how the IDB is working to expand its vision and objectives in renewable energy projects in Central and South America.

  13. Sustainability Efficiency Factor: Measuring Sustainability in Advanced Energy Systems through Exergy, Exergoeconomic, Life Cycle, and Economic Analyses

    Science.gov (United States)

    Boldon, Lauren

    (NHES) reference case studies to (1) introduce sustainability metrics, such as life cycle assessment, (2) demonstrate the methods behind exergy and exergoeconomic analyses, (3) provide an economic analysis of the potential for SMR development from first-of-a-kind (FOAK) to nth-of-a-kind (NOAK), thereby illustrating possible cost reductions and deployment flexibility for SMRs over large conventional nuclear reactors, (4) assess the competitive potential for incorporation of storage and hydrogen production in NHES and in regulated and deregulated electricity markets, (5) compare an SMR-hydrogen production plant to a natural gas steam methane reforming plant using the SEF, and (6) identify and review the social considerations which would support future nuclear development domestically and abroad, such as public and political/regulatory needs and challenges. The Global Warming Potential (GWP) for the SMR (300 MWth)-wind (60 MWe)-high temperature steam electrolysis (200 tons Hydrogen per day) system was calculated as approximately 874 g CO2-equivalent as part of the life cycle assessment. This is 92.6% less than the GWP estimated for steam methane reforming production of hydrogen by Spath and Mann. The unit exergetic and exergoeconomic costs were determined for each flow within the NHES system as part of the exergy/exergoeconomic cost analyses. The unit exergetic cost is lower for components yielding more meaningful work like the one exiting the SMR with a unit exergetic cost of 1.075 MW/MW. In comparison, the flow exiting the turbine has a very high unit exergetic cost of 15.31, as most of the useful work was already removed through the turning of the generator/compressor shaft. In a similar manner, the high unit exergoeconomic cost of 12.45/MW*sec is observed for the return flow to the reactors, because there is very little exergy present. The first and second law efficiencies and the exergoeconomic factors were also determined over several cases. For the first or base SMR

  14. Roundtabling Sustainability

    DEFF Research Database (Denmark)

    Ponte, Stefano

    2014-01-01

    councils’ and ‘sustainability roundtables’ and have been designed around a set of institutional features seeking to establish legitimacy, fend off possible criticism, and ‘sell’ certifications to potential users. The concept of ‘roundtabling’ emphasizes the fitting a variety of commodity...... and procedures to meet ‘good practice’ in standard setting and management. This is opening space for competing initiatives that are less democratic, quicker, and more aligned with industry interests to establish substantial presence in the market for sustainability certifications. These tend to more easily...

  15. Sustainable finance

    NARCIS (Netherlands)

    Boersma-de Jong, Margreet F.

    2012-01-01

    Presentation for Springschool of Strategy, University of Groningen, 10 October 2012. The role of CSR is to stimulate ethical behaviour, and as a result, mutual trust in society. Advantage of CSR for the company and the evolution of CSR. From CSR to Sustainable Finance: how does CSR influence

  16. Sustainable Procurement

    DEFF Research Database (Denmark)

    Telles, Pedro; Ølykke, Grith Skovgaard

    2017-01-01

    and within it how sustainable requirements have increased the level of compliance required, particularly regulatory compliance. Compliance was already present in previous EU public procurement frameworks, but its extent on Directive 2014/24/EU leads the authors to consider the current legal framework...

  17. Exergy sustainability.

    Energy Technology Data Exchange (ETDEWEB)

    Robinett, Rush D. III (.; ); Wilson, David Gerald; Reed, Alfred W.

    2006-05-01

    Exergy is the elixir of life. Exergy is that portion of energy available to do work. Elixir is defined as a substance held capable of prolonging life indefinitely, which implies sustainability of life. In terms of mathematics and engineering, exergy sustainability is defined as the continuous compensation of irreversible entropy production in an open system with an impedance and capacity-matched persistent exergy source. Irreversible and nonequilibrium thermodynamic concepts are combined with self-organizing systems theories as well as nonlinear control and stability analyses to explain this definition. In particular, this paper provides a missing link in the analysis of self-organizing systems: a tie between irreversible thermodynamics and Hamiltonian systems. As a result of this work, the concept of ''on the edge of chaos'' is formulated as a set of necessary and sufficient conditions for stability and performance of sustainable systems. This interplay between exergy rate and irreversible entropy production rate can be described as Yin and Yang control: the dialectic synthesis of opposing power flows. In addition, exergy is shown to be a fundamental driver and necessary input for sustainable systems, since exergy input in the form of power is a single point of failure for self-organizing, adaptable systems.

  18. Sustainable Buildings

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Elle, Morten

    The scientific community agrees that: all countries must drastically and rapidly reduce their CO2 emissions and that energy efficient houses play a decisive role in this. The general attitude at the workshop on Sustainable Buildings was that we face large and serious climate change problems...

  19. Sustainable Entrepreneurship

    DEFF Research Database (Denmark)

    Schaltegger, Stefan; Beckmann, Markus; Hockerts, Kai

    2018-01-01

    . We also explore the transformation path of the case company, which starts with simple use and then moves to the feedback to core business pattern. By drawing on insights from lead user theory in innovation management and sustainable entrepreneurship, we ground the new concept in extant literature...

  20. Sustainable machining

    CERN Document Server

    2017-01-01

    This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

  1. Sustainable processing

    DEFF Research Database (Denmark)

    Kristensen, Niels Heine

    2004-01-01

    Kristensen_NH and_Beck A: Sustainable processing. In Otto Schmid, Alexander Beck and Ursula Kretzschmar (Editors) (2004): Underlying Principles in Organic and "Low-Input Food" Processing - Literature Survey. Research Institute of Organic Agriculture FiBL, CH-5070 Frick, Switzerland. ISBN 3-906081-58-3...

  2. Architecture Sustainability

    NARCIS (Netherlands)

    Avgeriou, Paris; Stal, Michael; Hilliard, Rich

    2013-01-01

    Software architecture is the foundation of software system development, encompassing a system's architects' and stakeholders' strategic decisions. A special issue of IEEE Software is intended to raise awareness of architecture sustainability issues and increase interest and work in the area. The

  3. Sustainable development

    International Nuclear Information System (INIS)

    Boiteux, M.

    2004-01-01

    Marcel Boiteux evokes the results of the work on the sustainable development by the Academie des Sciences Morales et Politiques. This is a vast political programme with the goal of allowing all humanity to live well in growing unity while protecting the environment and favouring economic growth. (author)

  4. Sustainable Development

    African Journals Online (AJOL)

    Tsegai Berhane Ghebretekle

    Ethiopia is selected as a case study in light of its pace in economic growth ... Interrogating the Economy-First Paradigm in 'Sustainable Development' … 65 .... agreement, since such effective global cooperation on climate change ultimately ..... and foster innovation; reduce inequality within and among countries; make cities.

  5. Sustainable Soesterkwartier

    NARCIS (Netherlands)

    Abrahams, H.; Goosen, H.; Jong, de F.; Sickmann, J.; Prins, D.

    2010-01-01

    The municipality of Amersfoort wants to construct an endurable and sustainable eco-town in the Soesterkwartier neighbourhood, by taking future climate change into account. The impact of climate change at the location of the proposed eco-town was studied by a literature review.

  6. Sustainable Sizing.

    Science.gov (United States)

    Robinette, Kathleen M; Veitch, Daisy

    2016-08-01

    To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically

  7. Parameter Estimation

    DEFF Research Database (Denmark)

    Sales-Cruz, Mauricio; Heitzig, Martina; Cameron, Ian

    2011-01-01

    of optimisation techniques coupled with dynamic solution of the underlying model. Linear and nonlinear approaches to parameter estimation are investigated. There is also the application of maximum likelihood principles in the estimation of parameters, as well as the use of orthogonal collocation to generate a set......In this chapter the importance of parameter estimation in model development is illustrated through various applications related to reaction systems. In particular, rate constants in a reaction system are obtained through parameter estimation methods. These approaches often require the application...... of algebraic equations as the basis for parameter estimation.These approaches are illustrated using estimations of kinetic constants from reaction system models....

  8. Design and exergetic analysis of a novel carbon free tri-generation system for hydrogen, power and heat production from natural gas, based on combined solid oxide fuel and electrolyser cells

    Energy Technology Data Exchange (ETDEWEB)

    Perdikaris, N.; Hofmann, Ph.; Spyrakis, S. [Laboratory of Steam Boilers and Thermal Plants, School of Mechanical Engineering, Thermal Engineering Section, National Technical University of Athens, 9 Heroon Polytechniou Ave., Zografou, 15780 Athens (Greece); Panopoulos, K.D. [Institute for Solid Fuels Technology and Applications, Centre for Research and Technology Hellas, 4th km N.R. Ptolemais-Kozani, P.O. Box 95, 50200 Ptolemais (Greece); Kakaras, E. [Laboratory of Steam Boilers and Thermal Plants, School of Mechanical Engineering, Thermal Engineering Section, National Technical University of Athens, 9 Heroon Polytechniou Ave., Zografou, 15780 Athens (Greece); Institute for Solid Fuels Technology and Applications, Centre for Research and Technology Hellas, 4th km N.R. Ptolemais-Kozani, P.O. Box 95, 50200 Ptolemais (Greece)

    2010-03-15

    The Solid Oxide Cells (SOCs) are able to operate in two modes: (a) the Solid Oxide Fuel Cells (SOFCs) that produce electricity and heat and (b) the Solid Oxide Electrolyser Cells (SOEC) that consume electricity and heat to electrolyse water and produce hydrogen and oxygen. The present paper presents a carbon free SOEC/SOFC combined system for the production of hydrogen, electricity and heat (tri-generation) from natural gas fuel. Hydrogen can be locally used as automobile fuel whereas the oxygen produced in the SOEC is used to combust the depleted fuel from the SOFC, which is producing electricity and heat from natural gas. In order to achieve efficient carbon capture in such a system, water steam should be used as the SOEC anode sweep gas, to allow the production of nitrogen free flue gases. The SOEC and SOFC operations were matched through modeling of all components in Aspenplus trademark. The exergetic efficiency of the proposed decentralised system is 28.25% for power generation and 18.55% for production of hydrogen. The system is (a) carbon free because it offers an almost pure pressurised CO{sub 2} stream to be driven for fixation via parallel pipelines to the natural gas feed, (b) does not require any additional water for its operation and (c) offers 26.53% of its energetic input as hot water for applications. (author)

  9. Energetic analysis versus exergetic analysis of charcoal blast furnace of V and M do Brazil; Analise energetica versus analise exergetica do alto forno a carvao vegetal da V and M do Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Lis Nunes; Silva, Ricardo Junqueira [V e M do BRASIL S.A., Belo Horizonte, MG (Brazil); Franca, Geraldo Augusto Campolina; Lemos, Ricardo Jose Fernandes [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

    2011-12-21

    The energetic analysis is the traditional method of quantification of the energy used in an operation involving physical and chemical processes and transference and/or conversion of energy. Generally used through energetic balance that is based on the first law of thermodynamics to evaluate the energetic efficiency. This balance is used to determine and reduce the loss of energy. Although an energy balance does not provide information about the energy degradation or resources during a process and do not quantify the potential or quality of the energy fluxes and material that flow in a system and come out as products and losses. The exergetic analysis goes beyond the limitations of the first law of thermodynamics. The concept of exergy is based in the second law of thermodynamics. The objective of this paper is to compare the more suitable analysis method aiming the identification of the energy economy potentials and consequently the reduction in the emissions of the greenhouse gases, through the balance of mass, energy and exergy of the blast furnace 1 of V and M do Brazil. (author)

  10. Multi-criteria assessment of energy conversion systems by means of thermodynamic, economic and environmental parameters

    Science.gov (United States)

    Becerra Lopez, Humberto Ruben

    2007-12-01

    High expansion of power demand is expected in the Upper Rio Grande region (El Paso, Hudspeth, Culberson, Jeff Davis, Presidio and Brewster counties) as a result of both electrical demand growth and decommissioning of installed capacity. On the supply side a notable deployment of renewable power technologies can be projected owing to the recent introduction of a new energy policy in Texas, which attempts to reach 10,000 installed-MWe of renewable capacity for 2025. Power generation fueled by natural-gas might consistently expand due to the encouraged use of this fuel. In this context the array of participating technologies can be optimized, which, within a sustainability framework, translates into a multidimensional problem. The solution to the problem is presented through this dissertation in two main parts. The first part solves the thermodynamic-environmental problem through developing a dynamic model to project maximum allowable expansion of technologies. Predetermined alternatives include diverse renewable energy technologies (wind turbine, photovoltaic conversion, hybrid solar thermal parabolic trough, and solid oxide fuel cells), a conventional fossil-fuel technology (natural gas combined-cycle), and a breakthrough fossil-fuel technology (solid oxide fuel cells). The analysis is based on the concept of cumulative exergy consumption, expanded to include abatement of emissions. A Gompertz sigmoid growth is assumed and constrained by both exergetic self-sustenance and regional energy resource availability. This part of the analysis assumes that power demand expansion is met by full deployment of alternative technologies backed up by conventional technology. Results show that through a proper allowance for exergy reinvestment the power demand expansion may be met largely by alternative technologies minimizing the primary resource depletion. The second part of the study makes use of the dynamic model to support a multi-objective optimization routine, where the

  11. Sustainable Soil Management

    DEFF Research Database (Denmark)

    Green, Ole; Evgrafova, Alevtina; Kirkegaard Nielsen, Søren

    management strategies, which consider the site- and field-specific parameters and agricultural machinery’s improvements, it is possible to maximize production and income, while reducing negative environmental impacts and human health issues induced by agricultural activities as well as improving food......Linket til højre henviser til rapporten i trykt format til download. This report provides an overview on new technologies for integrate sustainable and resilient management practices in arable ecosystems for advanced farmers, consultants, NGOs and policy makers. By following sustainable soil...... and soil quality in short- and long-terms. This report also illustrates the importance to combine a system approach for plant production by assessing field readiness, managing in-field traffic management, implementing the sitespecific controlled as well as sensor-controlled seedbed preparation, seeding...

  12. Building sustainability

    CSIR Research Space (South Africa)

    Mass Media

    2007-11-01

    Full Text Available particu- lar social environment also being awarded. If a building can be used by the community after hours, it should be awarded extra points.” School sports facilities or meeting halls in corporate buildings, are some example. Multi-purpose use..., architect and senior researcher for the CSIR’s Built Environment Unit, the integra- tion of sustainability in building design cannot begin soon enough before it is too late. He says: “Unfortunately nothing is in place in South Africa. For a start...

  13. Sorting and sustaining cooperation

    DEFF Research Database (Denmark)

    Vikander, Nick

    2013-01-01

    This paper looks at cooperation in teams where some people are selfish and others are conditional cooperators, and where lay-offs will occur at a fixed future date. I show that the best way to sustain cooperation prior to the lay-offs is often in a sorting equilibrium, where conditional cooperators...... can identify and then work with one another. Changes to parameters that would seem to make cooperation more attractive, such as an increase in the discount factor or the fraction of conditional cooperators, can reduce equilibrium cooperation if they decrease a selfish player's incentive to sort....

  14. Inventory parameters

    CERN Document Server

    Sharma, Sanjay

    2017-01-01

    This book provides a detailed overview of various parameters/factors involved in inventory analysis. It especially focuses on the assessment and modeling of basic inventory parameters, namely demand, procurement cost, cycle time, ordering cost, inventory carrying cost, inventory stock, stock out level, and stock out cost. In the context of economic lot size, it provides equations related to the optimum values. It also discusses why the optimum lot size and optimum total relevant cost are considered to be key decision variables, and uses numerous examples to explain each of these inventory parameters separately. Lastly, it provides detailed information on parameter estimation for different sectors/products. Written in a simple and lucid style, it offers a valuable resource for a broad readership, especially Master of Business Administration (MBA) students.

  15. Interdependences between sustainable development and sustainable economy

    OpenAIRE

    Emilia Mioara CÂMPEANU; Carmen Valentina RĂDULESCU

    2014-01-01

    Sustainable development and sustainable economy are mostly used concepts. Understanding clearly their meaning allows their use in an appropriate context and, therefore, their boundaries in terms of theoretical and practical approaches on which occasion it can be given their interdependencies. The paper aim is to analyze the interdependences between sustainable development and sustainable economy.

  16. Virtual Sustainability

    Directory of Open Access Journals (Sweden)

    William Sims Bainbridge

    2010-09-01

    Full Text Available In four ways, massively multiplayer online role-playing games may serve as tools for advancing sustainability goals, and as laboratories for developing alternatives to current social arrangements that have implications for the natural environment. First, by moving conspicuous consumption and other usually costly status competitions into virtual environments, these virtual worlds might reduce the need for physical resources. Second, they provide training that could prepare individuals to be teleworkers, and develop or demonstrate methods for using information technology to replace much transportation technology, notably in commuting. Third, virtual worlds and online games build international cooperation, even blending national cultures, thereby inching us toward not only the world consciousness needed for international agreements about the environment, but also toward non-spatial government that cuts across archaic nationalisms. Finally, realizing the potential social benefits of this new technology may urge us to reconsider a number of traditional societal institutions.

  17. Sustainability; Sustentabilidade

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    This chapter analyses the production chain of ethanol, considering the impacts on the quality of the air, water supplies, soil occupation and biodiversity, and the efforts for the soil preservation. It is pointed out the activities of the production cycle and use of bio ethanol due to great uncertainties as far the environmental impacts is concerning and that will deserve more attention in future evaluations. At same time, the chapter highlights another activities where the present acknowledge is sufficient to assure the control and/or prediction of consequences of the desired intervention on the environment media to accommodate the sugar and ethanol production expansion. The consideration is not conservative but to promote the sustainable development.

  18. Sustainability Science Needs Sustainable Data!

    Science.gov (United States)

    Downs, R. R.; Chen, R. S.

    2013-12-01

    Sustainability science (SS) is an 'emerging field of research dealing with the interactions between natural and social systems, and with how those interactions affect the challenge of sustainability: meeting the needs of present and future generations while substantially reducing poverty and conserving the planet's life support systems' (Kates, 2011; Clark, 2007). Bettencourt & Kaur (2011) identified more than 20,000 scientific papers published on SS topics since the 1980s with more than 35,000 distinct authors. They estimated that the field is currently growing exponentially, with the number of authors doubling approximately every 8 years. These scholars are undoubtedly using and generating a vast quantity and variety of data and information for both SS research and applications. Unfortunately we know little about what data the SS community is actually using, and whether or not the data that SS scholars generate are being preserved for future use. Moreover, since much SS research is conducted by cross-disciplinary, multi-institutional teams, often scattered around the world, there could well be increased risks of data loss, reduced data quality, inadequate documentation, and poor long-term access and usability. Capabilities and processes therefore need to be established today to support continual, reliable, and efficient preservation of and access to SS data in the future, especially so that they can be reused in conjunction with future data and for new studies not conceived in the original data collection activities. Today's long-term data stewardship challenges include establishing sustainable data governance to facilitate continuing management, selecting data to ensure that limited resources are focused on high priority SS data holdings, securing sufficient rights to allow unforeseen uses, and preparing data to enable use by future communities whose specific research and information needs are not yet known. Adopting sustainable models for archival

  19. Environmental sustainability assessments of pharmaceuticals: an emerging need for simplification in life cycle assessments.

    Science.gov (United States)

    De Soete, Wouter; Debaveye, Sam; De Meester, Steven; Van der Vorst, Geert; Aelterman, Wim; Heirman, Bert; Cappuyns, Philippe; Dewulf, Jo

    2014-10-21

    The pharmaceutical and fine chemical industries are eager to strive toward innovative products and technologies. This study first derives hotspots in resource consumption of 2839 Basic Operations in 40 Active Pharmaceutical Ingredient synthesis steps through Exergetic Life Cycle Assessment (ELCA). Second, since companies are increasingly obliged to quantify the environmental sustainability of their products, two alternative ways of simplifying (E)LCA are discussed. The usage of averaged product group values (R(2) = 3.40 × 10(-30)) is compared with multiple linear regression models (R(2) = 8.66 × 10(-01)) in order to estimate resource consumption of synthesis steps. An optimal set of predictor variables is postulated to balance model complexity and embedded information with usability and capability of merging models with existing Enterprise Resource Planning (ERP) data systems. The amount of organic solvents used, molar efficiency, and duration of a synthesis step were shown to be the most significant predictor variables. Including additional predictor variables did not contribute to the predictive power and eventually weakens the model interpretation. Ideally, an organization should be able to derive its environmental impact from readily available ERP data, linking supply chains back to the cradle of resource extraction, excluding the need for an approximation with product group averages.

  20. Performance parameters of an ejector-absorption heat transformer

    International Nuclear Information System (INIS)

    Soezen, Adnan; Arcaklioglu, Erol; Oezalp, Mehmet; Yuecesu, Serdar

    2005-01-01

    Ejector-absorption heat transformers (EAHTs) are attractive for increasing a solar-pond's temperature and for recovering low-level waste-heat. Thermodynamic analysis of the performance of an EAHT is complicated due to the associated complex differential equations and simulation programs. This paper proposes the use of artificial neural-networks (ANNs) as a new approach to determine the performance parameters, as functions of only the working temperatures of the EAHT, which is used to increase the solar pond's temperature under various working conditions. Thus, this study is helpful in predicting the performance of an EAHT where the temperatures are known. Scaled conjugate gradient (SCG) and Levenberg-Marquardt (LM) learning algorithms and a logistic sigmoid transfer-function were used in the network. The best approach was investigated for performance parameters with developed software using various algorithms. The best statistical coefficients of multiple determinations (R 2 -values) equal 0.99995, 0.99997 and 0.99995 for the coefficient of performance (COP), exergetic coefficient of performance (ECOP) and circulation ratio (F), respectively obtained by the LM algorithm with seven neurons. In the comparison of performances, results obtained via analytic equations and by means of the ANN, the COP, ECOP and F for all working situations differ by less than 1.05%, 0.7% and 3.07%, respectively. These accuracies are acceptable in the design of the EAHT. The ANN approach greatly reduces the time required by design engineers to find the optimum solution. Apart from reducing the time required, it is possible to find solutions that make solar-energy applications more viable and thus more attractive to potential users. Also, this approach has the advantages of high computational speed, low cost for feasibility, rapid turn-around, which is especially important during iterative design phases, and ease of design by operators with little technical experience

  1. Sustainable NREL - Site Sustainability Plan FY 2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-01-01

    NREL's Site Sustainability Plan FY 2015 reports on sustainability plans for the lab for the year 2015 based on Executive Order Goals and provides the status on planned actions cited in the FY 2014 report.

  2. Bomb parameters

    International Nuclear Information System (INIS)

    Kerr, George D.; Young, Rebert W.; Cullings, Harry M.; Christry, Robert F.

    2005-01-01

    The reconstruction of neutron and gamma-ray doses at Hiroshima and Nagasaki begins with a determination of the parameters describing the explosion. The calculations of the air transported radiation fields and survivor doses from the Hiroshima and Nagasaki bombs require knowledge of a variety of parameters related to the explosions. These various parameters include the heading of the bomber when the bomb was released, the epicenters of the explosions, the bomb yields, and the tilt of the bombs at time of explosion. The epicenter of a bomb is the explosion point in air that is specified in terms of a burst height and a hypocenter (or the point on the ground directly below the epicenter of the explosion). The current reassessment refines the energy yield and burst height for the Hiroshima bomb, as well as the locations of the Hiroshima and Nagasaki hypocenters on the modern city maps used in the analysis of the activation data for neutrons and TLD data for gamma rays. (J.P.N.)

  3. Sustainability : Politics and governance

    NARCIS (Netherlands)

    Heinrichs, Harald; Biermann, Frank

    2016-01-01

    he article gives an overview of global sustainability policy and politics. It is shown how international policy making on sustainable development has progressed from environmental policy toward recent approaches of Earth system governance. Key challenges of international sustainability politics are

  4. Sustainability in Transport Planning

    DEFF Research Database (Denmark)

    Gudmundsson, Henrik; Greve, Carsten

    Contribution to session J: Joint University Sustainability Initiatives. This session will provide an inspiring overview of interdisciplinary research and teaching activities on sustainability bridging DTU, KU, and CBS, and introduce the joint collaboration Copenhagen Sustainability Initiative (COSI...

  5. Textiles and clothing sustainability sustainable technologies

    CERN Document Server

    2017-01-01

    This is the first book to deal with the innovative technologies in the field of textiles and clothing sustainability. It details a number of sustainable and innovative technologies and highlights their implications in the clothing sector. There are currently various measures to achieve sustainability in the textiles and the clothing industry, including innovations in the manufacturing stage, which is the crux of this book.

  6. Sustainable diets within sustainable food systems.

    Science.gov (United States)

    Meybeck, Alexandre; Gitz, Vincent

    2017-02-01

    Sustainable diets and sustainable food systems are increasingly explored by diverse scientific disciplines. They are also recognised by the international community and called upon to orient action towards the eradication of hunger and malnutrition and the fulfilment of sustainable development goals. The aim of the present paper is to briefly consider some of the links between these two notions in order to facilitate the operationalisation of the concept of sustainable diet. The concept of sustainable diet was defined in 2010 combining two totally different perspectives: a nutrition perspective, focused on individuals, and a global sustainability perspective, in all its dimensions: environmental, economic and social. The nutrition perspective can be easily related to health outcomes. The global sustainability perspective is more difficult to analyse directly. We propose that it be measured as the contribution of a diet to the sustainability of food systems. Such an approach, covering the three dimensions of sustainability, enables identification of interactions and interrelations between food systems and diets. It provides opportunities to find levers of change towards sustainability. Diets are both the results and the drivers of food systems. The drivers of change for those variously involved, consumers and private individuals, are different, and can be triggered by different dimensions (heath, environment, social and cultural). Combining different dimensions and reasons for change can help facilitate the transition to sustainable diets, recognising the food system's specificities. The adoption of sustainable diets can be facilitated and enabled by food systems, and by appropriate policies and incentives.

  7. Towards a Non-Human Primate Model of Alpha-Synucleinopathy for Development of Therapeutics for Parkinson's Disease: Optimization of AAV1/2 Delivery Parameters to Drive Sustained Expression of Alpha Synuclein and Dopaminergic Degeneration in Macaque.

    Directory of Open Access Journals (Sweden)

    James B Koprich

    Full Text Available Recent failures in clinical trials for disease modification in Parkinson's disease have highlighted the need for a non-human primate model of the synucleinopathy underpinning dopaminergic neuron degeneration. The present study was defined to begin the development of such a model in cynomolgus macaque. We have validated surgical and vector parameters to define a means to provide a robust over-expression of alpha-synuclein which is associated with Lewy-like pathology and robust degeneration of the nigrostriatal pathway. Thus, an AAV1/2 vector incorporating strong transcription and transduction regulatory elements was used to deliver the gene for the human A53T mutation of alpha-synuclein. When injected into 4 sites within each substantia nigra (7 μl per site, 1.7 x 1012 gp/ml, this vector provided expression lasting at least 4 months, and a 50% loss of nigral dopaminergic neurons and a 60% reduction in striatal dopamine. Further studies will be required to develop this methodology into a validated model of value as a drug development platform.

  8. Assessing sustainable remediation frameworks using sustainability principles.

    Science.gov (United States)

    Ridsdale, D Reanne; Noble, Bram F

    2016-12-15

    The remediation industry has grown exponentially in recent decades. International organizations of practitioners and remediation experts have developed several frameworks for integrating sustainability into remediation projects; however, there has been limited attention to how sustainability is approached and operationalized in sustainable remediation frameworks and practices - or whether sustainability plays any meaningful role at all in sustainable remediation. This paper examines how sustainability is represented in remediation frameworks and the guidance provided for practical application. Seven broad sustainability principles and review criteria are proposed and applied to a sample of six international remediation frameworks. Not all review criteria were equally satisfied and none of the frameworks fully met all criteria; however, the best performing frameworks were those identified as sustainability remediation frameworks. Intra-generational equity was addressed by all frameworks. Integrating social, economic and biophysical components beyond triple-bottom-line indicators was explicitly addressed only by the sustainable remediation frameworks. No frameworks provided principle- or rule-based guidance for dealing with trade-offs in sustainability decisions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Technology and sustainability

    NARCIS (Netherlands)

    Kroeze, C.; Boersema, J.J.; Tellegen, E.; Cremers, A.

    2011-01-01

    In ten essays, this book addresses a broad range of issues related to the interplay of sustainability and technology. How do population growth and technology relate to sustainable development? Can globalization be reconciled with sustainable development? Is sustainability a subjective or an

  10. Sustainable consumption and marketing

    NARCIS (Netherlands)

    Dam, van Y.K.

    2016-01-01

    Sustainable development in global food markets is hindered by the discrepancy between positive consumer attitudes towards sustainable development or sustainability and the lack of corresponding sustainable consumption by a majority of consumers. Apparently for many (light user) consumers the

  11. Externality or sustainability economics?

    International Nuclear Information System (INIS)

    Bergh, Jeroen C.J.M. van den

    2010-01-01

    In an effort to develop 'sustainability economics' Baumgaertner and Quaas (2010) neglect the central concept of environmental economics-'environmental externality'. This note proposes a possible connection between the concepts of environmental externality and sustainability. In addition, attention is asked for other aspects of 'sustainability economics', namely the distinction weak/strong sustainability, spatial sustainability and sustainable trade, distinctive sustainability policy, and the ideas of early 'sustainability economists'. I argue that both sustainability and externalities reflect a systems perspective and propose that effective sustainability solutions require that more attention is given to system feedbacks, notably other-regarding preferences and social interactions, and energy and environmental rebound. The case of climate change and policy is used to illustrate particular statements. As a conclusion, a list of 20 insights and suggestions for research is offered. (author)

  12. Physiological parameters

    International Nuclear Information System (INIS)

    Natera, E.S.

    1998-01-01

    The physiological characteristics of man depend on the intake, metabolism and excretion of stable elements from food, water, and air. The physiological behavior of natural radionuclides and radionuclides from nuclear weapons testing and from the utilization of nuclear energy is believed to follow the pattern of stable elements. Hence information on the normal physiological processes occurring in the human body plays an important role in the assessment of the radiation dose received by man. Two important physiological parameters needed for internal dose determination are the pulmonary function and the water balance. In the Coordinated Research Programme on the characterization of Asian population, five participants submitted data on these physiological characteristics - China, India, Japan, Philippines and Viet Nam. During the CRP, data on other pertinent characteristics such as physical and dietary were simultaneously being collected. Hence, the information on the physiological characteristics alone, coming from the five participants were not complete and are probably not sufficient to establish standard values for the Reference Asian Man. Nonetheless, the data collected is a valuable contribution to this research programme

  13. Engineering Sustainability: A Technical Approach to Sustainability

    OpenAIRE

    Rosen, Marc A.

    2012-01-01

    Sustainability is a critically important goal for human activity and development. Sustainability in the area of engineering is of great importance to any plans for overall sustainability given 1) the pervasiveness of engineering activities in societies, 2) their importance in economic development and living standards, and 3) the significant impacts that engineering processes and systems have had, and continue to have, on the environment. Many factors that need to be considered and appropriate...

  14. Sustainability in Business

    DEFF Research Database (Denmark)

    Tollin, Karin; Vej, Jesper

    2012-01-01

    How do companies integrate sustainability into their strategy and practices, and what factors explain their approach? In this paper a typology of sustainability strategies is presented as well as a conceptual framework relating sustainability at the company level to the functional level of market...... managers' mindsets, a framework addressing sustainability from four organisational learning schools was designed and followed......How do companies integrate sustainability into their strategy and practices, and what factors explain their approach? In this paper a typology of sustainability strategies is presented as well as a conceptual framework relating sustainability at the company level to the functional level...... of marketing. The central contribution of the typology is a strategic and managerial view on sustainability. Furthermore, the typology shows that sustainability in business is enacted from different areas of competences and fields in the literature (e.g. supply chain management, corporate branding, value...

  15. Sustainable Table | Welcome to Sustainable Table

    Science.gov (United States)

    Sustainable Seafood Industrial Agriculture Industrial Livestock Production Antibiotics Hormones rBGH Animal , safeguarding animal welfare and supporting local communities. Questions to Ask Asking questions is the best way Livestock Husbandry Sustainable Crop Production Innovative Agriculture New Farmers Organic Agriculture Local

  16. Education for sustainable development

    DEFF Research Database (Denmark)

    Breiting, Søren

    2009-01-01

     An introduction to the idea of sustainable development (SD) and education for sustainable development (ESD) with reference to the international Decade for Education for Sustainable Development . The chapter includes a focus on conflicting interests between present and future generations related ...... to the use of natural resources and other matters, and how that kind of issues can be dealt with in education as ESD....... An introduction to the idea of sustainable development (SD) and education for sustainable development (ESD) with reference to the international Decade for Education for Sustainable Development . The chapter includes a focus on conflicting interests between present and future generations related...

  17. Smart Sustainable Islands VS Smart Sustainable Cities

    Science.gov (United States)

    Pantazis, D. N.; Moussas, V. C.; Murgante, B.; Daverona, A. C.; Stratakis, P.; Vlissidis, N.; Kavadias, A.; Economou, D.; Santimpantakis, K.; Karathanasis, B.; Kyriakopoulou, V.; Gadolou, E.

    2017-09-01

    This paper has several aims: a) the presentation of a critical analysis of the terms "smart sustainable cities" and "smart sustainable islands" b) the presentation of a number of principles towards to the development methodological framework of concepts and actions, in a form of a manual and actions guide, for the smartification and sustainability of islands. This kind of master plan is divided in thematic sectors (key factors) which concern the insular municipalities c) the creation of an island's smartification and sustainability index d) the first steps towards the creation of a portal for the presentation of our smartification actions manual, together with relative resources, smart applications examples, and, in the near future the first results of our index application in a number of Greek islands and e) the presentation of some proposals of possible actions towards their sustainable development and smartification for the municipalities - islands of Paros and Antiparos in Greece, as case studies.

  18. Conceptualising sustainability assessment

    International Nuclear Information System (INIS)

    Pope, Jenny; Annandale, David; Morrison-Saunders, Angus

    2004-01-01

    Sustainability assessment is being increasingly viewed as an important tool to aid in the shift towards sustainability. However, this is a new and evolving concept and there remain very few examples of effective sustainability assessment processes implemented anywhere in the world. Sustainability assessment is often described as a process by which the implications of an initiative on sustainability are evaluated, where the initiative can be a proposed or existing policy, plan, programme, project, piece of legislation, or a current practice or activity. However, this generic definition covers a broad range of different processes, many of which have been described in the literature as 'sustainability assessment'. This article seeks to provide some clarification by reflecting on the different approaches described in the literature as being forms of sustainability assessment, and evaluating them in terms of their potential contributions to sustainability. Many of these are actually examples of 'integrated assessment', derived from environmental impact assessment (EIA) and strategic environmental assessment (SEA), but which have been extended to incorporate social and economic considerations as well as environmental ones, reflecting a 'triple bottom line' (TBL) approach to sustainability. These integrated assessment processes typically either seek to minimise 'unsustainability', or to achieve TBL objectives. Both aims may, or may not, result in sustainable practice. We present an alternative conception of sustainability assessment, with the more ambitious aim of seeking to determine whether or not an initiative is actually sustainable. We term such processes 'assessment for sustainability'. 'Assessment for sustainability' firstly requires that the concept of sustainability be well-defined. The article compares TBL approaches and principles-based approaches to developing such sustainability criteria, concluding that the latter are more appropriate, since they avoid many

  19. Handbook of sustainable engineering

    CERN Document Server

    Lee, Kun-Mo

    2013-01-01

    "The efficient utilization of energy, sustainable use of natural resources, and large-scale adoption of sustainable technologies is the key to a sustainable future. The Handbook of Sustainable Engineering provides tools that will help us achieve these goals". Nobel Prize Winner Dr. R.K. Pauchauri, Chairman, UN Intergovernmental Panel on Climate Change As global society confronts the challenges of diminishing resources, ecological degradation, and climate change, engineers play a crucial role designing and building technologies and products that fulfil our needs for utility and sustainability. The Handbook of Sustainable Engineering equips readers with the context and the best practices derived from both academic research and practical examples of successful implementations of sustainable technical solutions. The handbook’s content revolves around the two themes, new ways of thinking and new business models, including sustainable production, products, service systems and consumption while addressing key asse...

  20. Sustainable Water Infrastructure

    Science.gov (United States)

    Resources for state and local environmental and public health officials, and water, infrastructure and utility professionals to learn about sustainable water infrastructure, sustainable water and energy practices, and their role.

  1. Sustainable development. First part

    International Nuclear Information System (INIS)

    Colombo, U.; Lanzavecchia, G.; Berrini, M; Zambrini, M.; Bologna, G.; Carraro, C.; Hinterberger, F.; Mastino, G.; Federico, A.; Gaudioso, D.; Luise, A.; Mauro, F.; Padovani, L.; Federico, A.

    1998-01-01

    This paper summarizes a collective effort and represents the second edition of: Environment, energy, economy: a sustainable future. In this work are reported various interventions on sustainable development problem [it

  2. Sustainable Public Bids

    Directory of Open Access Journals (Sweden)

    Gil César Costa de Paula

    2016-06-01

    Full Text Available In this article we will discuss the issue of sustainability in public procurement, given that the government in Brazil is constituted as a great promoter of economic development and needs to adapt its acquisitions worldwide sustainability agenda.

  3. Neighbourhood facilities for sustainability

    CSIR Research Space (South Africa)

    Gibberd, Jeremy T

    2013-01-01

    Full Text Available . In this paper these are referred to as ‘Neighbourhood Facilities for Sustainability’. Neighbourhood Facilities for Sustainability (NFS) are initiatives undertaken by individuals and communities to build local sustainable systems which not only improve...

  4. FORUM: Is Ecotourism Sustainable?

    Science.gov (United States)

    Wall

    1997-07-01

    / It is legitimate to ask whether and in what form tourism might contribute to sustainable development. This is not the same as sustainable tourism which, as a single-sector approach to development, may overlook important linkages with other sectors. If tourism is to contribute to sustainable development, then it must be economically viable, ecologically sensitive and culturally appropriate. Ecotourism is often advocated as being a sustainable form of tourism but imprecision in terminology clouds basic issues and there are strong economic, ecological, and cultural reasons for believing that, even in its purest forms, ecotourism is likely to present substantial challenges to destination areas, particularly if it competes for scarce resources and displaces existing uses and users. Sustainable tourism and ecotourism are not synonyms, many forms of ecotourism may not be sustainable, and if ecotourism is to contribute to sustainable development, then careful planning and management will be required.KEY WORDS: Ecotourism; Sustainable development; Development; Tourism

  5. Synthetic sustained gene delivery systems.

    Science.gov (United States)

    Agarwal, Ankit; Mallapragada, Surya K

    2008-01-01

    Gene therapy today is hampered by the need of a safe and efficient gene delivery system that can provide a sustained therapeutic effect without cytotoxicity or unwanted immune responses. Bolus gene delivery in solution results in the loss of delivered factors via lymphatic system and may cause undesired effects by the escape of bioactive molecules to distant sites. Controlled gene delivery systems, acting as localized depot of genes, provide an extended sustained release of genes, giving prolonged maintenance of the therapeutic level of encoded proteins. They also limit the DNA degradation in the nuclease rich extra-cellular environment. While attempts have been made to adapt existing controlled drug delivery technologies, more novel approaches are being investigated for controlled gene delivery. DNA encapsulated in nano/micro spheres of polymers have been administered systemically/orally to be taken up by the targeted tissues and provide sustained release once internalized. Alternatively, DNA entrapped in hydrogels or scaffolds have been injected/implanted in tissues/cavities as platforms for gene delivery. The present review examines these different modalities for sustained delivery of viral and non-viral gene-delivery vectors. Design parameters and release mechanisms of different systems made with synthetic or natural polymers are presented along with their prospective applications and opportunities for continuous development.

  6. Sustainability Statement and Policy

    Science.gov (United States)

    Journal of Education for Sustainable Development, 2009

    2009-01-01

    This article presents nine resources that focus on environmental education and sustainability. These include: (1) "Sustainability Statement and Policy," Dalhousie University, Nova Scotia, Canada, 2009, which is available at http://office.sustainability.dal.ca/Governance; (2) "Climate Literacy: The Essential Principles of Climate…

  7. The sustainable development

    International Nuclear Information System (INIS)

    2004-01-01

    In the framework of the sustainable development week (june 2003), Actu Environnement published a complete document on the sustainable development to inform the public, recall the main steps of this notion (Rio conference and the following conferences) and the possible employments. It presents also the main organizations acting in the sustainable development domain. (A.L.B.)

  8. Toward sustainable logistics

    NARCIS (Netherlands)

    Soysal, Mehmet; Bloemhof-Ruwaard, Jacqueline M.

    2017-01-01

    The fast evolution of sustainability leads to the development of a new fast-growing concept called sustainable logistics management. This research addresses recent business trends and challenges in logistics and their implications for sustainable logistics management. Additionally, we discuss policy

  9. ORNL Annual Sustainability Report

    Energy Technology Data Exchange (ETDEWEB)

    Lapsa, Melissa Voss [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nichols, Teresa A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-02-01

    As described in this report, we have made substantial progress across the 25 roadmaps of the Sustainable Campus Initiative. The report also outlines our plans to continue integrating sustainable practices into the planning, execution, and evaluation of all ORNL activities. We appreciate your interest in our journey to sustainability, and we welcome your comments, questions, and suggestions.

  10. Toward sustainable logistics

    NARCIS (Netherlands)

    Soysal, Mehmet; Bloemhof-Ruwaard, Jacqueline M.

    2018-01-01

    The fast evolution of sustainability leads to the development of a new fast-growing concept called sustainable logistics management. This research addresses recent business trends and challenges in logistics and their implications for sustainable logistics management. Additionally, we discuss policy

  11. Sustainable Learning Organizations

    Science.gov (United States)

    Velazquez, Luis E.; Esquer, Javier; Munguia, Nora E.; Moure-Eraso, Rafael

    2011-01-01

    Purpose: The purpose of this paper is to debate how companies may better become a sustainable learning organization by offering the most used and insightful concepts of sustainability. Design/methodology/approach: Through literature review, learning organization and sustainability perspectives are explored and compared. Findings: Learning…

  12. Sustainability Annual Report 2013

    OpenAIRE

    2013-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  13. Sustainability Annual Report 2014

    OpenAIRE

    2014-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  14. Sustainability Annual Report 2017

    OpenAIRE

    2017-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  15. Sustainability Annual Report 2011

    OpenAIRE

    2011-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  16. Sustainability Annual Report 2012

    OpenAIRE

    2012-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  17. Sustainability Annual Report 2015

    OpenAIRE

    2015-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  18. Sustainability Annual Report 2016

    OpenAIRE

    2016-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  19. Critical sustainability parameters in defluoridation of drinking water

    DEFF Research Database (Denmark)

    Bregnhøj, Henrik

    to be critical since fluorosis is not always considered as the main problem of concern and improvements are not always visible for a number of years. Appropiate and cheap technique is always a must in poor villages. Finally the organisation of supporting functions that may include quality control, technical...

  20. Assessment of Sustainability of Sports Events (Slovenia

    Directory of Open Access Journals (Sweden)

    Aleksandra Golob

    2015-04-01

    Full Text Available Events industry plays an important role in nowadays economy and can have a substantial impact for a successful business; in addition, sustainability-oriented tourism is becoming an important component of development and planning of a tourist destination. Thus, organizing sustainability-oriented events is crucial and should focus on the zero waste event management and consider as many elements of sustainable development as possible. The same stands for organizing sports events. The aim of this paper was to find out to which level the organizers of existing sports events in Slovenia are taking into account different domains of sustainable development. Answering to a common questionnaire the organizers gave us a feedback considering four main areas: environmental, social, cultural, and economic criteria. The plan was to determine the level of sustainability of three sports events and compare them to each other according to the outstanding areas as well as to draw the attention to the importance of organizing sustainability-oriented sports events and minimizing negative effects of those. Since the field of research is complex, dynamic, and has an interdisciplinary character the results were attained using the DEX software which supports a qualitative approach and allows the modelling of complex decision-making processes with a large number of parameters and alternatives. Such methodology enables the input of a preliminary set of sustainability criteria and can be used as a support when deciding on the evaluation of sustainability of events in general.

  1. Life Cycle Sustainability Dashboard

    DEFF Research Database (Denmark)

    Traverso, Marzia; Finkbeiner, Matthias; Jørgensen, Andreas

    2012-01-01

    One method to assess the sustainability performance of products is life cycle sustainability assessment (LCSA), which assesses product performance considering the environmental,economic, and social dimensions of the life cycle. The results of LCSA can be used to compare different products...... of sustainability is the communicability of the results by means of a graphical representation (a cartogram), characterized by a suitable chromatic scale and ranking score. The integration of LCSA and the dashboard of sustainability into a so-called Life Cycle Sustainability Dashboard (LCSD) is described here...

  2. LCA and Sustainability

    DEFF Research Database (Denmark)

    Moltesen, Andreas; Bjørn, Anders

    2018-01-01

    LCA is often presented as a sustainability assessment tool. This chapter analyses the relationship between LCA and sustainability. This is done by first outlining the history of the sustainability concept, which gained momentum with the Brundtland Commission’s report ‘Our Common Future report...... is then demonstrated, and the strategy of LCA to achieving environmental protection, namely to guide the reduction of environmental impacts per delivery of a function, is explained. The attempt to broaden the scope of LCA, beyond environmental protection, by so-called life cycle sustainability assessment (LCSA......) is outlined. Finally, the limitations of LCA in guiding a sustainable development are discussed....

  3. EXERGETIC MODELLING OF RGETIC MODELLING OF OIL ...

    African Journals Online (AJOL)

    eobe

    f steam boilers using low pour fuel oil (LPFO) and diesel were used of material .... failure mode effect and fault tree analyses, the energy source for the ... Type of tube. Fire tube. 3. Type of firing. Internally fired. 4. Type of circulation. Forced. 5.

  4. Fur and Sustainability

    DEFF Research Database (Denmark)

    Skjold, Else; Csaba, Fabian

    2016-01-01

    This paper explores the notion of deeper luxury, which insists that 'real' luxury should involve sustainable practices in the production and consumption of luxury goods. It traces historical and recent developments in the field of fur, to understand the implications, uncertainties and ambiguities...... of luxury’s confrontation with sustainability. Considering fur in relation to future standards for luxury products, we raise questions about moral problematisation and justification of luxury in terms of sustainability. We first examine the encounter of luxury with sustainability and explain...... the significance of the notion of ‘deeper luxury’. After taking stock of the impact of sustainability on luxury and various directions in which sustainable luxury is evolving, we discuss concepts of sustainable development in relation to the history of moral problematisation of luxury. This leads to the case...

  5. Sustainability index for Taipei

    International Nuclear Information System (INIS)

    Lee, Y.-J.; Huang Chingming

    2007-01-01

    Sustainability indicators are an effective means of determining whether a city is moving towards sustainable development (SD). After considering the characteristics of Taipei, Taiwan, discussions with experts, scholars and government departments and an exhaustive literature review, this study selected 51 sustainability indicators corresponding to the socio-economic characteristic of Taipei City. Such indicators should be regarded as a basis for assessing SD in Taipei City. The 51 indicators are classified into economic, social, environmental and institutional dimensions. Furthermore, statistical data is adopted to identify the trend of SD from 1994 to 2004. Moreover, the sustainability index is calculated for the four dimensions and for Taipei as a whole. Analysis results demonstrate that social and environmental indicators are moving towards SD, while economic and institutional dimensions are performing relatively poorly. However, since 2002, the economic sustainability index has gradually moved towards SD. Overall, the Taipei sustainability index indicates a gradual trend towards sustainable development during the past 11 years

  6. Sustainability and Entrepreneurial Action

    DEFF Research Database (Denmark)

    Korsgaard, Steffen T.; Anderson, Alistair

    Abstract Objectives - This paper explores how entrepreneurial action can lead to environmental sustainability. It builds on the assumption that the creation of sustainble practices is one of the most important challenges facing the global society, and that entrepreneurial action is a vital......: resource oriented sustainable entrepreneurial action.  Approach - The paper uses a case study approach to build deeper theoretical knowledge of environmentally sustainable entrepreneurship.  Results - The paper identifies and analyses a distinct form of sustainable entrepreneurship -  resource oriented...... entrepreneurship - which uses bricolage in various ways to create sustainable solutions. Implications and value - The concept of resource oriented sustainable entrepreneurship contributes to the theoretical understanding of how entrepreneurial action can support sustainability, Furthermore the case study has...

  7. Health and sustainability.

    Science.gov (United States)

    Kjӕrgård, Bente; Land, Birgit; Bransholm Pedersen, Kirsten

    2014-09-01

    In the present article, we explore how sustainable development strategies and health promotion strategies can be bridged. The concept of the 'duality of structure' is taken as our starting point for understanding the linkages between health promotion and sustainable development, and for uncovering the structural properties or conditions which either enable or constrain sustainable public health initiatives. We argue that strategies towards health promotion are not sufficiently integrated with strategies for sustainable development, and thus political strategies aimed at solving health problems or sustainability problems may cause new, undesired and unforeseen environmental or health problems. First, we explore how the relation between health and sustainability is articulated in international policy documents. Next, we develop a model for understanding the relation between health promotion and sustainability. Third, we use examples from agriculture and food production to illustrate that health and sustainability are mutually enabling and constraining. We conclude that while the renewed focus on food security and food inequalities has brought the health and sustainability dimensions of the food system onto the political agenda, the conceptualization of duality between health and sustainability could be a new platform for a critical and theoretical stance towards the market-oriented food system strategy. Thinking along the lines of duality means that the integration of health promotion strategies and sustainable development strategies cannot be based on an approach to integration in which either health or sustainability is given precedence over the other. From a duality perspective, integration means conceiving sustainability from a health perspective and health from a sustainability perspective. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Green energy strategies for sustainable development

    International Nuclear Information System (INIS)

    Midilli, Adnan; Dincer, Ibrahim; Ay, Murat

    2006-01-01

    In this study we propose some green energy strategies for sustainable development. In this regard, seven green energy strategies are taken into consideration to determine the sectoral, technological, and application impact ratios. Based on these ratios, we derive a new parameter as the green energy impact ratio. In addition, the green energy-based sustainability ratio is obtained by depending upon the green energy impact ratio, and the green energy utilization ratio that is calculated using actual energy data taken from literature. In order to verify these parameters, three cases are considered. Consequently, it can be considered that the sectoral impact ratio is more important and should be kept constant as much as possible in a green energy policy implementation. Moreover, the green energy-based sustainability ratio increases with an increase of technological, sectoral, and application impact ratios. This means that all negative effects on the industrial, technological, sectoral and social developments partially and/or completely decrease throughout the transition and utilization to and of green energy and technologies when possible sustainable energy strategies are preferred and applied. Thus, the sustainable energy strategies can make an important contribution to the economies of the countries where green energy (e.g., wind, solar, tidal, biomass) is abundantly produced. Therefore, the investment in green energy supply and progress should be encouraged by governments and other authorities for a green energy replacement of fossil fuels for more environmentally benign and sustainable future

  9. SMART SUSTAINABLE ISLANDS VS SMART SUSTAINABLE CITIES

    Directory of Open Access Journals (Sweden)

    D. N. Pantazis

    2017-09-01

    Full Text Available This paper has several aims: a the presentation of a critical analysis of the terms “smart sustainable cities” and “smart sustainable islands” b the presentation of a number of principles towards to the development methodological framework of concepts and actions, in a form of a manual and actions guide, for the smartification and sustainability of islands. This kind of master plan is divided in thematic sectors (key factors which concern the insular municipalities c the creation of an island’s smartification and sustainability index d the first steps towards the creation of a portal for the presentation of our smartification actions manual, together with relative resources, smart applications examples, and, in the near future the first results of our index application in a number of Greek islands and e the presentation of some proposals of possible actions towards their sustainable development and smartification for the municipalities - islands of Paros and Antiparos in Greece, as case studies.

  10. Health and Sustainability

    DEFF Research Database (Denmark)

    Land, Birgit; Pedersen, Kirsten Bransholm; Kjærgård, Bente

    2014-01-01

    In the present article, we explore how sustainable development strategies and health promotion strategies can be bridged. The concept of the ‘duality of structure’ is taken as our starting point for understanding the linkages between health promotion and sustainable development, and for uncovering...... the structural properties or conditions which either enable or constrain sustainable public health initiatives. We argue that strategies towards health promotion are not sufficiently integrated with strategies for sustainable development, and thus political strategies aimed at solving health problems...... or sustainability problems may cause new, undesired and unforeseen environmental or health problems. First, we explore how the relation between health and sustainability is articulated in international policy documents. Next, we develop a model for understanding the relation between health promotion...

  11. ICT innovations for sustainability

    CERN Document Server

    Aebischer, Bernard

    2015-01-01

    ICT Innovations for Sustainability is an investigation of how information and communication technology can contribute to sustainable development. It presents clear definitions of sustainability, suggesting conceptual frameworks for the positive and negative effects of ICT on sustainable development. It reviews methods of assessing the direct and indirect impact of ICT systems on energy and materials demand, and examines the results of such assessments. In addition, it investigates ICT-based approaches to supporting sustainable patterns of production and consumption, analyzing them at various levels of abstraction – from end-user devices, Internet infrastructure, user behavior, and social practices to macro-economic indicators.   Combining approaches from Computer Science, Information Systems, Human-Computer Interaction, Economics, and Environmental Sciences, the book presents a new, holistic perspective on ICT for Sustainability (ICT4S). It is an indispensable resource for anyone working in the area of ICT...

  12. Engineering students' sustainability approaches

    Science.gov (United States)

    Haase, S.

    2014-05-01

    Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The empirical base of the article is a nation-wide, web-based survey sent to all newly enrolled engineering students in Denmark commencing their education in the fall term 2010. The response rate was 46%. The survey focused on a variety of different aspects of what can be conceived as sustainability. By means of cluster analysis, three engineering student approaches to sustainability are identified and described. The article provides knowledge on the different prerequisites of engineering students in relation to the role of sustainability in engineering. This information is important input to educators trying to target new engineering students and contribute to the provision of engineers equipped to meet sustainability challenges.

  13. Sustainable Concrete Technology

    Directory of Open Access Journals (Sweden)

    Sim J.

    2015-12-01

    Full Text Available The growing concern over global warming and significant ecological changes requires sustainable development in all fields of science and technology. Concrete not only consumes huge amount of energy and natural sources, but also emits large amount of CO2, mainly due to the production of cement. It is evident that such large amount of concrete production has put significant impact on the energy, resource, environment, and ecology of the society. Hence, how to develop the concrete technology in a sustainable way has become a significant issue. In this paper, some of Korean researches for sustainable development of concrete are presented. These are sustainable strengthening for deteriorated concrete structure, sustainable reinforcement of new concrete structure, sustainable concrete using recycled aggregate and supplementary cementing materials and finally application of each technique to precast concrete.

  14. Sustainable Housing Design

    DEFF Research Database (Denmark)

    Lauring, Gert Michael

    2016-01-01

    Sustainable Housing Design. Integrating technical and housing quality aspects of sustainable architecture in civil engineering education. Summary An integrated design approach to sustainable architecture is outlined that combines concerns for zero energy building, good indoor climate and adequate...... phases. The outcome shows that integrated design further solutions where sustainable urban forms of settlement can be highly energy efficient while also attractive from a user perspective. Key words: Sustainable architecture, integrated design, zero-energy-housing, dense urban living. 1. Introduction...... When designing sustainable housing, energy optimization and satisfactory indoor climates are central issues that need to be incorporated from early design phases if to reach a coherent design. It might also be argued that the energy consumption of contemporary buildings only plays a rela-tively minor...

  15. Is Mass Customization Sustainable?

    DEFF Research Database (Denmark)

    Petersen, Thomas Ditlev; Jørgensen, Kaj Asbjørn; Nielsen, Kjeld

    2011-01-01

    Mass customizers are like other companies currently experiencing an increasing customer demand for environmentally sustainable products as well as an increasingly strict legislation regarding environmental sustainability. This paper addresses the issue whether the concepts mass customization...... and sustainability are fundamentally compatible by asking the question: can a mass customized product be sustainable? Several factors could indicate that mass customized products are less sustainable than standardized products; however other factors suggest the opposite. This paper explores these factors during...... three life cycle phases for a product: Production, Use and End of Life. It is concluded that there is not an unambiguous causal relationship between mass customization and sustainability; however several factors unique to mass customized products are essential to consider during product and process...

  16. Motivations Behind Sustainable Purchasing

    OpenAIRE

    Vörösmarty, Gyöngyi; Dobos, Imre; Tátrai, Tünde

    2011-01-01

    Sustainability issues in purchasing are receiving greater attention. Literature is rapidly growing, with several research programs being initiated to investigate the topic. This study presents the results of a research project which aims to reveal and structure the motivating forces leading companies to make efforts in sustainability purchasing and the means used to attain achievements in some fields of sustainability. Results presented in the literature are scattered in terms of ...

  17. Monitor Sustainable Netherlands 2011

    International Nuclear Information System (INIS)

    2011-09-01

    The Monitor provides an image of the sustainability of the Dutch society. It shows which areas are successful and what the 'concerns for tomorrow' are from the point of view of sustainability. An analysis is conducted of how the Netherlands are doing in the fields of climate change, biodiversity, health, knowledge, graying and social cohesion. These and many other topics are discussed in this monitor by means of a number of sustainability indicators and detail analyses [mk]. [nl

  18. Monitor Sustainable Netherlands 2009

    International Nuclear Information System (INIS)

    2009-02-01

    The Monitor provides an image of the sustainability of the Dutch society. It shows which areas are successful and what the 'concerns for tomorrow' are from the point of view of sustainability. An analysis is conducted of how the Netherlands are doing in the fields of climate change, biodiversity, health, knowledge, graying and social cohesion. These and many other topics are discussed in this monitor by means of a number of sustainability indicators and detail analyses [mk] [nl

  19. Managing Supplier Sustainability Risk

    OpenAIRE

    Harilainen, Hanna-Riitta

    2014-01-01

    Supply chains are increasingly global, often reaching to developing regions. The media pressure brand owners to be responsible, but a product is only as sustainable as the practices of all the companies involved in manufacturing it are. It’s not enough that the brand owner acts responsibly; sustainable practices have to reach component and raw material suppliers upstream. Image risk has often been recognized as reason for investing in sustainability. In the supply chain context, supplier m...

  20. Sustainability and Organizational Change

    OpenAIRE

    Sitnikov, Catălina

    2012-01-01

    The relevant and, above all, remarkable feature of sustainability is due to its "duality": on the one hand, it is an indispensable element within the companies even if, on the other hand, it increases the costs of many activities and processes. Facing the challenge of sustainability will determine and create, in the coming years, emerging organizational forms. If ten years ago, many managers clearly expressed their doubts regarding the financial feasibility of sustainability, today, they admi...

  1. Towards a Sustainable Architecture

    OpenAIRE

    Patuel Chust, Pascual

    2014-01-01

    The growing awareness of the importance of ecology in the last decades has led many architects to rethink their construction proposals to make them more respectful of the environment and sustainability. The present article analyzes the legislation, conferences and international declarations (Earth Summit, Declaration of Interdependence for a Sustainable Future, Introduction to Sustainable Design) that have advocated the practice of a more ecological architecture. Also examined ...

  2. Sustainable Management of Food

    Science.gov (United States)

    To provide information to organizations to help them implement sustainable food management, including joining the Food Recovery Challenge. To provide education and information to communities and concerned citizens.

  3. Sustainable wireless networks

    CERN Document Server

    Zheng, Zhongming; Xuemin

    2013-01-01

    This brief focuses on network planning and resource allocation by jointly considering cost and energy sustainability in wireless networks with sustainable energy. The characteristics of green energy and investigating existing energy-efficient green approaches for wireless networks with sustainable energy is covered in the first part of this brief. The book then addresses the random availability and capacity of the energy supply. The authors explore how to maximize the energy sustainability of the network and minimize the failure probability that the mesh access points (APs) could deplete their

  4. Action Research for Sustainability

    DEFF Research Database (Denmark)

    Egmose, Jonas

    on urban sustainability the need to move towards sustainability at societal level is conceptualised as a democratic challenge questioning the way we live on planet earth. By understanding sustainability as an immanent and emergent ability of ecological and social life, continuously to renew itself without...... with a greater say in the future of urban sustainability research, the work shows how action research can make important methodological contributions to processes of social learning between citizens and scientists by enabling free spaces in peoples everyday life and within academia, where aspects...

  5. Action Research for Sustainability

    DEFF Research Database (Denmark)

    Egmose, Jonas

    by analysing processes of social learning. The book addresses the need to move towards sustainability at societal level as a democratic challenge questioning the way we live on planet earth. By conceptualising sustain-ability as an immanent and emergent ability of ecological and social life, continuously...... to provide local citizens with a greater say in the future of urban sustainability research, this book shows how action research can make important methodological contributions to processes of social learning between citizens and scientists by enabling free spaces in peoples everyday life and within academia...

  6. Sustained spheromak experiments in CTX

    International Nuclear Information System (INIS)

    Jarboe, T.R.; Barnes, C.W.; Henins, I.; Hoida, H.W.; Linford, R.K.; Sherwood, A.R.

    1983-01-01

    So far, spheromaks can be sustained as long as the source is injecting helicity. When the injection stops the configuration decays. Spheromks have been sustained for more than 1 ms with total lifetimes of more than 2 ms. The physical properties of the sustained spheromak are under investigation in this paper. Preliminary data indicate that (B) approx. = 2 kG, n approx. = 2 x 10 14 -cm -3 and T /sub e/ approx. = 20-30 eV. An helicity decay rate is determined from the ratio of an estimate of the helicity content of the spheromak and the rate of helicity flow from the source. In the coaxial source geometry a constant value of poloidal flux /PHI/ /sub p/ is placed inside the center electrode. By applying a voltage V between the two electrodes toroidal flux is injected (/PHI/ /sub t/ =V) which links the poloidal flux. The rate of helicity injection is then 2V/PHI/ /sub p/ . The helicity content of the spheromak is estimated by measuring the fields at one point and using the model described above to calculate the profiles. The result is that /TAU/ /sub Hel/ approx. = 200 us. This value is about the same as the /TAU/ /sub B/ 2 of a decaying spheromak with similar parameters. These results indicate that helicity injection is possible and that a large fraction (30-100%) of the injected helicity is absorbed

  7. Sustaining Exploration in Mature Basins

    International Nuclear Information System (INIS)

    Bayo, A.

    2002-01-01

    Exploration is a business like any other business driven by opportunity, resources and expectation of profit. Therefore, exploration will thrive anywhere the opportunities are significant, the resources are available and the outlook for profit (or value creation) is good. To sustain exploration activities anywhere, irrespective of the environment, there must be good understanding of the drivers of these key investment criteria. This paper will examine these investment criteria as they relate to exploration business and address the peculiarity of exploration in mature basin. Mature basins are unique environment that lends themselves a mix of fears, paradigms and realities, particularly with respect to the perception of value. To sustain exploration activities in a mature basin, we need to understand these perceptions relative to the true drivers of profitability. Exploration in the mature basins can be as profitable as exploration in emerging basins if the dynamics of value definition-strategic and fiscal values are understood by operators, regulators and co ventures alike. Some suggestions are made in this presentation on what needs to be done in addressing these dynamic investment parameters and sustaining exploration activities in mature basins

  8. Sustainable Building Life Cycle Design

    Directory of Open Access Journals (Sweden)

    Ginzburg Alexander

    2016-01-01

    Full Text Available The current building life cycle management system in the Russian Federation is a family of discrete subsystems that exist independently for different building life cycle stages. In this situation building reliability and sustainable functioning are out of the question. The implementation of a united information model (BIM-model intended to describe building entire life cycle will allow to raise the sustainability, but this will happen only if goals and concerns of all participants of the project process are properly coordinated. An important figure of process sustainability is the organizational and technological reliability (OTR that describes the possibility of a system to reach a goal. In case of building life cycle design, the economical efficiency of a building can be considered as the goal. The required technical, ecological, organizational, and other parameters form a complex of constraints that determine the area of allowable values for building functioning. In its broad meaning, OTR may be understood as the probability of receiving an economical effect based on the value of organizational and economical reliability (OER.

  9. Sustainable building organisation

    NARCIS (Netherlands)

    Schmid, P.

    1998-01-01

    Sustainable Development and Sustainable Building is mainly a question of (human) environmentally-conscious Organisation and Management Criteria are needed in order to capture the best practices in the field. Therefore we developed modells and methods, which help to choose the most adequate

  10. At Home with Sustainability

    DEFF Research Database (Denmark)

    Hale, Lara

    2018-01-01

    of default rules in subconscious decision-making, this research finds that, ultimately, awareness drives the demand necessary for the creation of sustainable consumption. Whereas direct appeal to individuals has a disappointing level of influence on sustainability choices, it is understood that green...

  11. Predicting Sustainable Work Behavior

    DEFF Research Database (Denmark)

    Hald, Kim Sundtoft

    2013-01-01

    Sustainable work behavior is an important issue for operations managers – it has implications for most outcomes of OM. This research explores the antecedents of sustainable work behavior. It revisits and extends the sociotechnical model developed by Brown et al. (2000) on predicting safe behavior...

  12. Sustainability in Software Engineering

    NARCIS (Netherlands)

    Wolfram, N.J.E.; Lago, P.; Osborne, Francesco

    2017-01-01

    The intersection between software engineering research and issues related to sustainability and green IT has been the subject of increasing attention. In spite of that, we observe that sustainability is still not clearly defined, or understood, in the field of software engineering. This lack of

  13. Sustainable Agriculture: Cover Cropping

    Science.gov (United States)

    Webster, Megan

    2018-01-01

    Sustainable agriculture practices are increasingly being used by farmers to maintain soil quality, increase biodiversity, and promote production of food that is environmentally safe. There are several types of sustainable agriculture practices such as organic farming, crop rotation, and aquaculture. This lesson plan focuses on the sustainable…

  14. Sustaining Urban Forests

    Science.gov (United States)

    John F. Dwyer; David J. Nowak

    2003-01-01

    The significance of the urban forest resource and the powerful forces for change in the urban environment make sustainability a critical issue in urban forest management. The diversity, connectedness, and dynamics of the urban forest establish the context for management that will determine the sustainability of forest structure, health, functions, and benefits. A...

  15. Engineering Students' Sustainability Approaches

    Science.gov (United States)

    Haase, S.

    2014-01-01

    Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The…

  16. Thermodynamics and sustainable development

    NARCIS (Netherlands)

    Cornelissen, Rene

    1997-01-01

    It is the objective of this thesis to demonstrate exergy analysis as a powerful instrument to obtain sustainable development. An important aspect of sustainable development is the minimisation of irreversibilities caused by the use of non-renewables. In order to limit the scope of this thesis

  17. Sustainability at BPA 2012

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-12-01

    BPA’s Sustainability Action Plan is grounded in our commitment to environmental stewardship and Executive Order 13514 that calls on the federal agencies to “lead by example” by setting a 2020 greenhouse gas emissions target, increasing energy efficiency; reducing fleet petroleum consumption; conserving water; reducing waste; supporting sustainable communities; and leveraging federal purchasing power to promoting environmentally responsible products and technologies.

  18. Gut microbiota sustains hematopoiesis

    DEFF Research Database (Denmark)

    Theilgaard-Mönch, Kim

    2017-01-01

    In this issue of Blood, Josefsdottir et al provide substantial evidence that commensal gut microbes regulate and sustain normal steady-state hematopoiesis.1......In this issue of Blood, Josefsdottir et al provide substantial evidence that commensal gut microbes regulate and sustain normal steady-state hematopoiesis.1...

  19. Sustainable economic structures

    NARCIS (Netherlands)

    Dellink, R.B.; Bennis, M.; Verbruggen, H.

    1999-01-01

    The paper introduces four scenarios for sustainable economic structures in the Netherlands for 2030. The aim of this paper is to provide possible answers to what a sustainable future might look like in terms of alternative economic structures. To this end, an empirical economy-ecology model is

  20. Measurement in Sustainable Building

    DEFF Research Database (Denmark)

    Hale, Lara

    2018-01-01

    Measurement is a necessary aspect of planning and constructing buildings. However, recent attempts to integrate the social dimension of sustainable building into building design and specifications demand measurement of non-technical qualities, such as well-being. The Active House Alliance, in lieu...... and continued provision of sustainable buildings to market demand....

  1. Leading Sustainability in Schools

    Science.gov (United States)

    Carr, Katie

    2016-01-01

    What is the role of schools, and more specifically school leadership, in the transition to a sustainable future for humankind? What different forms of leadership are needed to enable this role? The challenges are huge and complex and for those of us engaged in promoting sustainability learning, it is clear that the issue has never been more…

  2. Aesthetics of sustainable architecture

    NARCIS (Netherlands)

    Lee, S.; Hill, G.; Sauerbruch, M.; Hutton, L.; Knowles, R.; Bothwell, K.; Brennan, J.; Jauslin, D.; Holzheu, H.; AlSayyad, N.; Arboleda, G.; Bharne, V.; Røstvik, H.; Kuma, K.; Sunikka-Blank, M.; Glaser, M.; Pero, E.; Sjkonsberg, M.; Teuffel, P.; Mangone, G.; Finocchiaro, L.; Hestnes, A.; Briggs, D.; Frampton, K.; Lee, S.

    2011-01-01

    The purpose of this book is to reveal, explore and further the debate on the aesthetic potentials of sustainable architecture and its practice. This book opens a new area of scholarship and discourse in the design and production of sustainable architecture, one that is based in aesthetics. The

  3. Sustaining the wild equals sustaining the world.

    Science.gov (United States)

    Nelson, G

    1994-01-01

    Sustainable development and carrying capacity are concepts that denote meeting society's needs without compromising the survival of future generations. The United States and other industrialized countries are pursuing a self-destructive course when fueling their economies by consuming their capital and degrading and depleting their resource base. Maximum exploitation of all resources has been the guiding ethic without paying respect to the environmental consequences. A sustainable society is still possible if strong political leadership and an ecologically literate society with an environmental ethic evolves. In the 1990s the world's population is calculated to increase to 6.3 billion people, the population of the United States already exceeds its carrying capacity and neither of these population increases are sustainable in the long run. In 1916 the US had 98 million people, and in 1994 it had about 260 million and it is still growing. The consequences are already obvious: the National Park System had just 358,000 visitors in 1916, 33 million in 1950, 172 million in 1970, and over 270 million in 1993. Often economists are an impediment to a sustainable economy because they fail to factor in the accumulated environmental deficit or annual cost of environmental deterioration when measuring annual economic output. Fortunately, in the US a conservation ethic is beginning to develop that will eventually become a strong social, political, and economic force. For instance, Wisconsin has mandated environmental education in every school from kindergarten through 12th grade. Such a program will provide the moral and political support to move the country to a sustainable economy. Even losing nations have recovered from World War II, but there is no recovery from destroyed ecosystems.

  4. Sustainable nuclear energy dilemma

    Directory of Open Access Journals (Sweden)

    Afgan Naim H.

    2013-01-01

    Full Text Available Sustainable energy development implies the need for the emerging potential energy sources which are not producing adverse effect to the environment. In this respect nuclear energy has gained the complimentary favor to be considered as the potential energy source without degradation of the environment. The sustainability evaluation of the nuclear energy systems has required the special attention to the criteria for the assessment of nuclear energy system before we can make firm justification of the sustainability of nuclear energy systems. In order to demonstrate the sustainability assessment of nuclear energy system this exercise has been devoted to the potential options of nuclear energy development, namely: short term option, medium term option, long term option and classical thermal system option. Criteria with following indicators are introduced in this analysis: nuclear indicator, economic indicator, environment indicator, social indicator... The Sustainability Index is used as the merit for the priority assessment among options under consideration.

  5. Sustaining Participatory Design Initiatives

    DEFF Research Database (Denmark)

    Iversen, Ole Sejer; Dindler, Christian

    2014-01-01

    While many participatory design (PD) projects succeed in establishing new organisational initiatives or creating technology that is attuned to the people affected, the issue of how such results are sustained after the project ends remains an important challenge. We explore the challenge...... these various forms of sustainability may be pursued in PD practice and how they can become a resource in reflecting on PD activities. Finally, we discuss implications for PD practice, suggesting that a nuanced conception of sustainability and how it may relate to PD practice are useful resources for designers...... of sustaining PD initiatives beyond the individual project and discuss implications for PD practice. First, based on current PD literature, we distinguish between four ideal typical forms of sustainability: maintaining, scaling, replicating and evolving. Second, we demonstrate from a case study how...

  6. The challenge of sustainability

    International Nuclear Information System (INIS)

    Orr, D.W.

    1993-01-01

    This paper discusses sustainability in a world that has changed rapidly. The author suggests that ecological assumptions embedded in communism and capitalism are badly flawed, but the flaws were not apparent when there were fewer than a billion people on earth living at low technology levels. Sustaining the earth's vital signs is a challenge to our perception of time, and the numbers - population, environmental damage, oil consumption, waste disposal - are too large to comprehend easily. There is a global debate about what sustainability means. In fact the challenge of sustainability is 6 different challenges: overcoming the tendency to deny inconvenient realities; establishing accurate indicators of human and ecological health; questions about the kinds of technology necessary to make the transition to sustainability; education; the need for an emotional bond between man and nature; rebuilding the existing democratic institutions. 16 refs

  7. Sustainable built environments

    CERN Document Server

    Haase, Dagmar

    2013-01-01

    Sustainable design is a collective process whereby the built environment achieves unprecedented levels of ecological balance through new and retrofit construction, with the goal of long-term viability and humanization of architecture. Focusing on the environmental context, sustainable design merges the natural, minimum resource conditioning solutions of the past (daylight, solar heat, and natural ventilation) with the innovative technologies of the present.  The desired result is an integrated “intelligent” system that supports individual control with expert negotiation for resource consciousness. International experts in the field address the fundamental questions of sustainable design and landscape management: How should the sustainability of landscapes and buildings be evaluated? Which targets have to be set and which thresholds should not be exceeded? What forms of planning and governance structures exist and to what extent do they further the goals of sustainability?  Gathering 30 peer-reviewed ent...

  8. Agroecology and Sustainable Agriculture

    Directory of Open Access Journals (Sweden)

    Fabio Caporali

    Full Text Available In the framework of the 16th National Meeting of the Italian Ecological Society (“Global Change, Ecological Diversity and Sustainability”, University of Tuscia, Viterbo, 19-22 September 2006, a symposium was devoted to “Agroecology and Sustainable Development”. A major goal of this symposium was to contribute to keeping the dialogue among the experts of the various disciplines alive. Sustainability of agriculture is a challenge for society world wide. Universities and society as a whole have a responsibility in re-examining current perception of nature, of the world and of human society in the light of natural resources depletion, increasing pollution and social inequalities. The urgency to address sustainability issues is increasingly being reflected in the manner in which institutions of higher education around the world are giving priority to the teaching, research and practice of sustainability. The University of Tuscia is involved in international initiatives concerning teaching and research in Agroecology and Sustainable Agriculture.

  9. Sustainability Marketing Commitment

    DEFF Research Database (Denmark)

    Tollin, Karin; Bech Christensen, Lars

    2017-01-01

    sustainability in marketing, processes associated with sustainability marketing commitment, drivers of sustainability marketing at the functional level of marketing, and its organizational context. Using survey data from 269 managers in marketing, covering a broad range of industries in Sweden and Denmark, we...... took a structural modelling approach to examine construct relationships, mediation, and moderation effects. Overall, the findings show that marketing capabilities associated with the innovation of new products, services, and business models constitute a strong driver to leverage sustainability......Corporate sustainability is an important strategy and value orientation for marketing, but scarce research addresses the organizational drivers and barriers to including it in companies’ marketing strategies and processes. The purpose of this study is to determine levels of commitment to corporate...

  10. Sustainability and Organizational Change

    Directory of Open Access Journals (Sweden)

    Catălina Sitnikov

    2012-06-01

    Full Text Available The relevant and, above all, remarkable feature of sustainability is due to its "duality": on the one hand, it is an indispensable element within the companies even if, on the other hand, it increases the costs of many activities and processes. Facing the challenge of sustainability will determine and create, in the coming years, emerging organizational forms. If ten years ago, many managers clearly expressed their doubts regarding the financial feasibility of sustainability, today, they admit the importance of sustainability for the competitive advantage of the companies they manage. Currently, companies have great opportunities to support build a sustainable global economy, becoming one of the solutions to the most pressing societal challenges. Whether it is about reducing pollution, global warming, reducing use of water resources and other limited resources or ensuring a better work environment for employees throughout the supply chain, there are many things that companies can and should do.

  11. What is sustainability economics?

    Energy Technology Data Exchange (ETDEWEB)

    Baumgaertner, Stefan [Department of Sustainability Sciences, Leuphana University of Lueneburg (Germany); Department of Economics, Leuphana University of Lueneburg (Germany); Quaas, Martin [Department of Economics, University of Kiel (Germany)

    2010-01-15

    While economists have been contributing to the discussion of various aspects of sustainability for decades, it is just recently that the term 'sustainability economics' was used explicitly in the ecological, environmental, and resource economics community. Yet, the contributions that use the term 'sustainability economics' do not refer to any explicit definition of the term, and are not obviously joined by common or unifying characteristics, such as subject focus, methodology, or institutional background. The question thus arises: what is 'sustainability economics'? In this essay, we systematically define and delineate 'sustainability economics' in terms of its normative foundation, aims, subject matter, ontology, and genuine research agenda. (author)

  12. Sustainability and uncertainty

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint

    2007-01-01

    The widely used concept of sustainability is seldom precisely defined, and its clarification involves making up one's mind about a range of difficult questions. One line of research (bottom-up) takes sustaining a system over time as its starting point and then infers prescriptions from...... this requirement. Another line (top-down) takes an economical interpretation of the Brundtland Commission's suggestion that the present generation's needsatisfaction should not compromise the need-satisfaction of future generations as its starting point. It then measures sustainability at the level of society...... a clarified ethical goal, disagreements can arise. At present we do not know what substitutions will be possible in the future. This uncertainty clearly affects the prescriptions that follow from the measure of sustainability. Consequently, decisions about how to make future agriculture sustainable...

  13. Sustainability of abrasive processes

    DEFF Research Database (Denmark)

    Aurich, J.C.; Linke, B.; Hauschild, Michael Zwicky

    2013-01-01

    , the content of technical presentations in STC G, and the results of a comprehensive literature study. The approach to sustainability includes environmental, social, and economic sustainability in accordance with the definition proposed in the Brundtland Report of the United Nations [156]. The main focus......This paper presents an overview of research on sustainability of abrasive processes. It incorporates results from a round robin study on ‘‘energy-efficiency of abrasive processes’’ which has been carried out within the scientific technical committee ‘‘abrasive processes’’ (STC G) of CIRP...... is on environmental and social sustainability. Economic sustainability will be considered as manufacturing productivity. © 2013 CIRP....

  14. Sustainable Agricultural Marketing Initiatives

    Directory of Open Access Journals (Sweden)

    Hakan Adanacıoğlu

    2015-07-01

    Full Text Available Sustainable marketing is a holistic approach that puts equal emphasis on environmental, social equity, and economic concerns in the development of marketing strategies. The purpose of the study is to examine and discuss the sustainable agricultural marketing initiatives practiced throughout the World and Turkey, and to put forth suggestions to further improve the performance of agricultural marketing initiatives in Turkey. Some of the sustainable agricultural marketing initiatives practiced around the world are carried out through civil organizations. Furthermore; some of these initiatives have also launched by farmers, consumers, food processors and retailers. The long-term strategies to increase these initiatives should be determined due to the fact that examples of successful sustainable agricultural marketing initiatives are inadequate and cannot be spread in Turkey. In this context, first of all, the supports provided by the government to improve agricultural marketing systems, such as EU funds for rural development should be compatible with the goals of sustainable marketing. For this purpose, it should be examined whether all proposed projects related to agricultural marketing meet the social, economic, and environmental principles of sustainable marketing. It is important that supporting organizations, especially civil society organisations, should take an active role for faster dissemination and adoption of sustainable agricultural marketing practices in Turkey. These organizations may provide technical assistance in preparing successful project proposals and training to farm groups. In addition, the other organizations, such as local administrations, producers' associations, cooperatives, can contribute to the success of sustainable agricultural marketing initiatives. The use of direct marketing strategies and vertical integration attempts in sustainable agricultural marketing initiatives that will likely be implemented in Turkey is

  15. Effect of the design variables on the energy performance and size parameters of a heat transformer based on the system acetone/H[sub 2]/2-propanol

    Energy Technology Data Exchange (ETDEWEB)

    Gandia, L M; Montes, M [Ente Vasco de la Energia, Bilbao (Spain). Div. de Investigacion y Recursos

    1992-12-01

    A high-temperature chemical heat pump based on the system acetone/H[sub 2]/2-propanol for waste heat recovery was studied. Two reversible catalytic chemical reactions are involved in this system. The waste heat (at 333-353K) is recovered by means of the endothermic liquid-phase dehydrogenation of 2-propanol, and is upgraded at high temperature (453-473K) by the reverse reaction, the exothermic gaseous-phase hydrogenation of acetone. In this process, a fraction of the recovered waste heat is removed at low temperature (303K), to carry out the separation by vapour rectification between acetone and 2-propanol. A mathematical model was developed, that permits the study of the effect of the heat pump operating conditions on the coefficient of performance (COP), exergetic efficiency and size parameters. This model allows the optimal range for the system control variables to be estimated. Under these conditions, the energy and size parameters have been calculated on a basis of 0.32 MW upgraded heat. (author)

  16. Interpreting sustainable development

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Over the past decade, the term" sustainable development"has emerged as the principal concept in the development field. The concept emerged in the 1970s and was first promoted in the international environmental and development communities with the publication of the " world conservation strategy"(1980). It was popularized by the Brundtland report, " Our common future"(1987). The Brundtland Commission defined sustainable development as " development which meets the needs of the present, without compromising the sustainability of future generation to meet their own needs". The Earth Summit(1992) established "sustainable development" as the most important policy of the 21st century. Since then, the relationship between development and environment has been widely discussed and sustainabale development is now an important part of the vocabulary of environmental policy research and analysis. In this paper, we begin by tracing the evolution of the concept of sustainable development. Definitions of sustainable development in ecology, economics and sociology are then explored and discussed. This paper also examine the contribution that a broadly-based concept of sustainable development can make: as a goal, an attitude and as a guiding principle for integrating economic development and environmental protection.

  17. Sustainable winegrowing: current perspectives

    Directory of Open Access Journals (Sweden)

    Mariani A

    2015-05-01

    Full Text Available Angela Mariani,1 Antonella Vastola2 1Department of Economic and Legal Studies, University Parthenope, Naples, 2School of Agricultural, Forestry, Food and Environmental Sciences, University of Basilicata, Potenza, Italy Abstract: The winegrowing sector worldwide is strongly committed to improving environmental and social sustainability. The aim of this work, based on a literature review, is to highlight current sustainability perspectives and the related main issues. There is a broad consensus that the challenge to achieve a greater spread of sustainable practices is to enhance environmental and social sustainability while maintaining economic viability. From the producers' point of view, the priority is to bridge the still substantial knowledge gaps in terms of perceived environmental benefits, economic benefits, and costs. Thus, an increased research effort focusing on the costs and benefits of different winegrowing practices and technical assistance with implementation might support their diffusion. Moreover, targeted marketing strategies are needed to: enhance consumers' involvement and their attitude toward sustainable wine; improve understanding and use of sustainable labels and claims; and raise awareness of some environmental credentials of wine packaging, mainly with reference to lightweight glass bottles. Keywords: winegrower, sustainability, wine, consumer, marketing strategies

  18. Sustainability Infused Curriculum

    Science.gov (United States)

    Ibarra, D. L.

    2015-12-01

    The Independent Schools Foundation Academy (ISF) in Hong Kong established a sustainability policy in 2015, which explicitly states, "an experimentally integrated, environmentally and ethically sustainable system of science education and conservation practices based on the 2012 Jeju Declaration of the World Conservation Congress will be implemented through the school". ISF Academy is a private Chinese bilingual school in Hong Kong serving over 1500 students K-12, following the framework and curriculum of the International Baccalaureate Organization (IBO). The strategy behind the implementation of this policy includes: development of a scientific sustainable curriculum that is age appropriate; establish a culture of sustainability within the ISF community and beyond to the wider HK community; install sustainable infrastructure that allows students to learn; and learn first hand sustainable living practices. It is well understood that solutions to the environmental challenges facing Hong Kong and our planet will require multiple disciplines. The current sustainability programs at ISF include: a) a whole school aerobic food waste composting system and organic farming, b) energy consumption monitoring of existing buildings, c) upcoming installation of an air pollution monitoring equipment that will correlate with the AQHI data collected by the Hong Kong government, d) a Renewable Energy Education Center (REEC) that will teach students about RE and also produce solar energy for classroom consumption, and e) student lead environmental group that manages the paper and used cooking oil recycling on campus. The Shuyuan Science and Sustainability faculty work closely with classroom teachers to ensure that the above mentioned projects are incorporated into the curriculum throughout the school. Interdisciplinary units (IDU) of study are being developed that encourage faculty and students to work across subject areas. Projects include Personal Projects, Extended Essays

  19. The Cradle to Cradle concept - is it always sustainable?

    DEFF Research Database (Denmark)

    Bjørn, Anders; Strandesen, Maria

    TerraSkin with a cellulose based reference paper was conducted. From this, energy systems and recycling infrastructure was found to be decisive parameters for the sustainability of C2C products. They are therefore not always sustainable. Moreover a literature study identified inherent sustainability......The Cradle to Cradle (C2C) concept has gained wide interest among especially designers over the past few years. This paper aims to investigate whether C2C products are in fact always sustainable and to explore whether an ideal C2C society is so too. An LCA comparing the C2C certified mineral paper...

  20. Textiles and clothing sustainability nanotextiles and sustainability

    CERN Document Server

    2017-01-01

    This book highlights the sustainability aspects of textiles and clothing sector in light of nanomaterials and technologies. The invasion of nano in every industrial sector has been important and has made remarkable changes as well as posed new challenges, including the textiles and clothing sector. There is quite a great deal of research happening in terms of nano materials for textiles across the globe, some of which are covered in this book. .

  1. The sustainable development

    International Nuclear Information System (INIS)

    Robreau, Y.; Porcher, P.

    2002-11-01

    This document aims to define the sustainable development concept with a special attention for France and Israel position. The first part recalls the history of the sustainable development from the ''Man and Biosphere'' program of the UNESCO to Rio protocol. Then are described the principles of the sustainable development, the France plans and the France position at Johannesburg conference. The last part is devoted to the Israel position and a short presentation of the consequences of the greenhouse gases on the human health and the environment. (A.L.B.)

  2. Lean maturity, lean sustainability

    DEFF Research Database (Denmark)

    Jørgensen, Frances; Matthiesen, Rikke; Nielsen, Jacob

    2007-01-01

    . A framework for describing levels of lean capability is presented, based on a brief review of the literature and experiences from 12 Danish companies currently implementing lean. Although still in its emerging phase, the framework contributes to both theory and practice by describing developmental stages......Although lean is rapidly growing in popularity, its implementation is far from problem free and companies may experience difficulties sustaining long term success. In this paper, it is suggested that sustainable lean requires attention to both performance improvement and capability development...... that support lean capability development and consequently, lean sustainability....

  3. Sustainable Facilities Management

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten; Hoffmann, Birgitte

    2004-01-01

    The Danish public housing sector has more than 20 years of experience with sustainable facilities management based on user involvement. The paper outlines this development in a historical perspective and gives an analysis of different approaches to sustainable facilities management. The focus...... is on the housing departments and strateies for the management of the use of resources. The research methods used are case studies based on interviews in addition to literature studies. The paper explores lessons to be learned about sustainable facilities management in general, and points to a need for new...

  4. Sustainable development - an entrepreneur's view

    International Nuclear Information System (INIS)

    Fahrni, F.

    1995-01-01

    The following topics are dealt with in this paper: prizing the environment, inducing change, getting the right mix, energy and market place, financing sustainable development, trade and sustainable development, managing corporate change, the Sulzer strategy for sustainable development. (author)

  5. Analyse that! : understanding sustainable design

    NARCIS (Netherlands)

    Brand, van den G.J.W.; Wit, de M.H.

    2004-01-01

    This paper describes a method for the analysis of sustainable building projects. Sustainable technology measures can easily be misinterpreted, consequently leading to unsustainable building solutions. Our research and educations aims at discovering new approaches for sustainable design. For building

  6. Contribution of Nuclear Science in Agriculture Sustainability

    International Nuclear Information System (INIS)

    Soliman, S.M.; Galal, Y.G.M.

    2017-01-01

    Sustainable agricultural systems employ natural processes to achieve acceptable levels of productivity and food quality while minimizing adverse environmental impacts. Sustainable agriculture must, by definition, be ecologically sound, economically viable, and socially responsible. Sustainable agriculture must nurture healthy co systems and support the sustainable management of land, water and natural resources, while ensuring world food security. To be sustainable, agriculture must meet the needs of present and future generations for its products and services, while ensuring profitability, environmental health and social and economic equity. The global transition to sustainable food and agriculture will require major improvements in the efficiency of resource use, in environmental protection and in systems resilience. In Mediterrane an environments, crops are grown mainly in the semiarid and sub-humid are as. In arid and semiarid are as dry land farming, techniques are of renewed interest in the view of sustain ability. They are aimed to increase water accumulation in the soil, reduce runoff and soil evaporation losses, choose species and varieties able to make better use of rainwater, and rationalize fertilization plans, sowing dates, and weed and pest control. Fertilization plans should be based on well-defined principles of plant nutrition, soil chemistry, and chemistry of the fertilizer elements. Starting from the calculation of nutrient crop uptake (based on the actually obtainable yield), dose calculation must be corrected by considering the relation ship between the availability of the trace elements in soil and the main physical and chemical parameters of the soil (ph, organic matter content, mineralization rate, C/N, ratio of solubilization of phosphorus, active lime content, presence of antagonist ions, etc.). In the Egyptian Atomic Energy Authority, Soil and Water Research Department, nuclear techniques including radio and stable isotopes in addition to

  7. Sustainable Transportation and Health

    Directory of Open Access Journals (Sweden)

    Norbert Mundorf

    2018-03-01

    Full Text Available We are experiencing a shift in thinking about Transportation and Mobility, which makes this Special Issue on Sustainable Transportation and Health in the International Journal of Environmental Research and Public Health especially timely.[...

  8. Food, Globalization and Sustainability

    NARCIS (Netherlands)

    Oosterveer, P.J.M.; Sonnenfeld, D.A.

    2011-01-01

    Food is increasingly traded internationally, thereby transforming the organisation of food production and consumption globally and influencing most food-related practices. This transition is generating unfamiliar challenges related to sustainability of food provision, the social impacts of

  9. The macroecology of sustainability

    Science.gov (United States)

    Burger, Joseph R.; Allen, Craig D.; Brown, James H.; Burnside, William R.; Davidson, Ana D.; Fristoe, Trevor S.; Hamilton, Marcus J.; Mercado-Silva, Norman; Nekola, Jeffrey C.; Okie, Jordan G.; Zuo, Wenyun

    2012-01-01

    The discipline of sustainability science has emerged in response to concerns of natural and social scientists, policymakers, and lay people about whether the Earth can continue to support human population growth and economic prosperity. Yet, sustainability science has developed largely independently from and with little reference to key ecological principles that govern life on Earth. A macroecological perspective highlights three principles that should be integral to sustainability science: 1) physical conservation laws govern the flows of energy and materials between human systems and the environment, 2) smaller systems are connected by these flows to larger systems in which they are embedded, and 3) global constraints ultimately limit flows at smaller scales. Over the past few decades, decreasing per capita rates of consumption of petroleum, phosphate, agricultural land, fresh water, fish, and wood indicate that the growing human population has surpassed the capacity of the Earth to supply enough of these essential resources to sustain even the current population and level of socioeconomic development.

  10. Environmentally Sustainable Economic Growth

    Directory of Open Access Journals (Sweden)

    Stelian Brad

    2016-05-01

    Full Text Available Economic growth and sustainable development are important issues for social prosperity. Sustainable development strives for moderate and responsible use within the economic activity of the limited resources of our planet, whereas economic growth does not limit the resource exploitation and energy, being mainly focused on productivity increase. From this perspective, both conceptual and operational contradictions occur between the two pillars of prosperity. This paper looks to these contradictions and proposes some streams of intervention such as economic growth and environmental sustainability to operate in harmony. A structured framework for innovative problem solving is considered in this respect. Results of this research show that it is possible to induce smart measures in the economic system for directing businesses towards new paradigms where economic growth is possible without negative effects on environmental sustainability.

  11. Sustainable Materials Management

    Science.gov (United States)

    To introduce businesses, NGOs, and government officials to the concept of Sustainable Materials Management (SMM). To provide tools to allow stakeholders to take a lifecycle approach managing their materials, & to encourage them to join a SMM challenge.

  12. Sustainable roadway lighting seminar.

    Science.gov (United States)

    2014-07-01

    The objective of this project was to develop and conduct a half-day educational seminar on sustainable : roadway lighting at three locations within New York State: Rochester, New York City, and Albany. : Primary attendees were engineers from the New ...

  13. Sustainable Practices Innovation

    Science.gov (United States)

    Better sustainability means more environmentally conscious and efficient businesses and communities. EPA helps modify the way we consume energy, deal with waste, and grow our economy through programs such as Energy Star, E3, Smart Growth, and WaterSense.

  14. Sustainable Building Operation

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2009-01-01

    of sustainable building operation and a survey amongst building administrators from the private and the social housing sector. Our results show that there are many good examples on sustainable building operation in Danish housing estates, where local building managers, residents etc. have gained impressive......Energy-savings in the existing building stock have becomes a main goal in national and international policies. Often focus is on building-renovations, whereas the potential of sustainable building operation to a large extent has been neglected. Nevertheless, international research as well...... as practical experiences from Danish housing estates indicates that there are large potentials for energy savings by focusing on the operation of the buildings. We suggest that in order to achieve sustainability in the existing housing, renovation and operations should be seen as integrated parts...

  15. Teaching sustainable design

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, P.; Haggard, K.; Knuckles, A.; Le Noble, J. [California Polytechnic State Univ., San Luis Obispo, CA (United States)

    1995-11-01

    Sustainable design is inclusive, holistic and integrative. It require humility and guts, caring and a certain degree of stubbornness. It helps to do it cooperatively in a group. Human interest in sustainability has gained a great deal of impetus over the last several years as the problems of the late 20th and the early 21st century have become clearer. Design for sustainability broadens and integrates many previously separate design concerns to create a unified approach that is both compelling and ripe with new possibilities. Ecosystem regeneration, ecological land use planning, biometric design, regional environmental and economic viability, natural landscape maintenance, resource optimization, integrated infrastructure system, neotraditional and pedestrian oriented urban design, passive solar architecture, appropriate technology, renewable building materials, healthy buildings, and the aesthetics of place; are a few of these design concerns that, when welded together, can create sustainability.

  16. Sustainable Enterprise Excellence

    DEFF Research Database (Denmark)

    Edgeman, Rick; Williams, Joseph; Eskildsen, Jacob Kjær

    , supply chain, customer-related, human capital, financial, marketplace, societal, and environmental performance. Sustainable Enterprise Excellence integrates ethical, efficient and effective (E3) enterprise governance with 3E (equity, ecology, economy) Triple Top Line strategy throughout enterprise...

  17. Education for Sustainable development

    African Journals Online (AJOL)

    ESD (education for sustainable development) planning and implementation, and regular ... between the environment and socio-economic issues of poverty and ..... capacity to make informed decisions (T7) and a sense of responsibility (T9), ...

  18. Sustainable Buildings in Interaction

    DEFF Research Database (Denmark)

    Elle, Morten

    2007-01-01

    The first attempts to build sustainable buildings in Denmark were typically located on the countryside. The basic idea was to create buildings that were independent of the technical infrastructure. District heating has, however, been the dominating solution to heating in buildings in Denmark......, and the focus on sustainable building have gradually turned from special houses on the countryside to normally looking houses in the urban fabric, integrated in the technical infrastructure. Some new built urban areas in Denmark will, however, not have to be supplied with district heating – these developments...... are going to consist of passive houses. The first sustainable buildings were built by their users, and the user – building interaction still play a decisive role for the performance of the present sustainable buildings. The users have to understand how the building functions. Urban design is essential...

  19. Towards Intelligently - Sustainable Cities?

    Directory of Open Access Journals (Sweden)

    Luca Salvati

    2013-04-01

    Full Text Available In the quest for achieving sustainable cities, Intelligent and Knowledge City Programmes (ICPs and KCPs represent cost-efficient strategies for improving the overall performance of urban systems. However, even though nobody argues on the desirability of making cities “smarter”, the fundamental questions of how and to what extent can ICPs and KCPs contribute to the achievement of urban sustainability lack a precise answer. In the attempt of providing a structured answer to these interrogatives, this paper presents a methodology developed for investigating the modalities through which ICPs and KCPs contribute to the achievement or urban sustainability. Results suggest that ICPs and KCPs efficacy lies in supporting cities achieve a sustainable urban metabolism through optimization, innovation and behavior changes.

  20. Packaging for Sustainability

    CERN Document Server

    Lewis, Helen; Fitzpatrick, Leanne

    2012-01-01

    The packaging industry is under pressure from regulators, customers and other stakeholders to improve packaging’s sustainability by reducing its environmental and societal impacts. This is a considerable challenge because of the complex interactions between products and their packaging, and the many roles that packaging plays in the supply chain. Packaging for Sustainability is a concise and readable handbook for practitioners who are trying to implement sustainability strategies for packaging. Industry case studies are used throughout the book to illustrate possible applications and scenarios. Packaging for Sustainability draws on the expertise of researchers and industry practitioners to provide information on business benefits, environmental issues and priorities, environmental evaluation tools, design for environment, marketing strategies, and challenges for the future.

  1. Energy and Sustainable Development

    International Nuclear Information System (INIS)

    2013-01-01

    None of the eight Millennium Development Goals (MDGs) adopted by the United Nations in 2000 directly addressed energy, although for nearly all of them - from eradicating poverty and hunger to improving education and health - progress has depended on greater access to modern energy. Thirteen years later, energy is being given more attention. The target date for the MDGs is 2015, and in 2012 the UN began deliberations to develop sustainable development goals to guide support for sustainable development beyond 2015. The Future We Want, the outcome document of the 2012 United Nations Conference on Sustainable Development (also known as Rio+20) gives energy a central role: ''We recognize the critical role that energy plays in the development process, as access to sustainable modern energy services contributes to poverty eradication, saves lives, improves health and helps provide for basic human needs''

  2. Strategic sustainability performance plan

    Science.gov (United States)

    2010-06-01

    In October 2009, President Obama signed Executive Order (EO) 13514 that sets sustainability : goals for Federal agencies and focuses on making improvements in environmental, energy and : economic performance. The Executive Order requires Federal agen...

  3. System Innovation for Sustainability

    DEFF Research Database (Denmark)

    System Innovation for Sustainability 2 focuses on change towards sustainable personal mobility based on implemented cases analysed from a system perspective. It examines what changes can be made to help us reduce our need for mobility, or start to make use of more sustainable mobility systems...... in order to provide sustainable solutions to our current ‘lock-in’ problems. Three major problem areas are considered (the ‘three Cs’): carbon emissions (and the growing contribution of mobility to the climate change crisis), congestion, and casualties. And each strategy proposed addresses one or more...... of these problem areas. Among the cases discussed are: Norway’s carbon compensation scheme for air travel; Madrid’s high-occupancy vehicle lanes; London’s congestion charge scheme; market-based instruments such as eco-labelling for cars; and taxation. The book identifies opportunities for actors...

  4. Biorefinery Sustainability Analysis

    DEFF Research Database (Denmark)

    J. S. M. Silva, Carla; Prunescu, Remus Mihail; Gernaey, Krist

    2017-01-01

    This chapter deals with sustainability analysis of biorefinery systems in terms of environmental and socio-economic indicators . Life cycle analysis has methodological issues related to the functional unit (FU), allocation , land use and biogenic carbon neutrality of the reference system and of t......This chapter deals with sustainability analysis of biorefinery systems in terms of environmental and socio-economic indicators . Life cycle analysis has methodological issues related to the functional unit (FU), allocation , land use and biogenic carbon neutrality of the reference system...... and of the biorefinery-based system. Socio-economic criteria and indicators used in sustainability frameworks assessment are presented and discussed. There is not one single methodology that can aptly cover the synergies of environmental, economic, social and governance issues required to assess the sustainable...

  5. Sustainable Enterprise Excellence

    DEFF Research Database (Denmark)

    Edgeman, Rick

    2013-01-01

    Structured Abstract Purpose: Sustainable Enterprise Excellence (SEE) is defined and developed through integration and expansion of business excellence modeling and sustainability thought. The intent is to enable simple yet reliable enterprise assessment of triple bottom line (TBL) performance...... and produce actionable enterprise foresight that can enable next best practices and sources of sustainable competitive advantage through innovation. Methodology: Key elements of SEE are identified from various business excellence and sustainability reporting sources, including the Global Reporting Initiative...... assessment approach similar in structure to those behind established excellence awards are developed that enable enterprise assessment of progress toward SEE. The resulting assessment is delivered in a highly consumable, combined narrative and graphic format referred to as a SEE NEWS Report. Practical...

  6. Fur and sustainability

    DEFF Research Database (Denmark)

    Skjold, Else; Ræbild, Ulla; Tanderup, Sisse

    2016-01-01

    interviews and observations at the premises of Kopenhagen Fur, as well as with stakeholders and collaborate partners in Denmark and in China. The definition of sustainability in the report must be seen as related to Design School Kolding's research umbrella of Sustainable Futures - a term chosen to unite...... practices around retail and communication (by Else Skjold, PhD in user studies and business management). On the basis of these four sub-projects, the report concludes the following: Currently, fur is placed very centrally in the moral debates around sustainability, as fur farming highligts environmental...... sustainability within the garment sector at large, and to define its own unique position for the future. With a departure in the the four sub-projects, the report lists a line of recommendations for how it would be possible to develop and revitalise traditional and current practices around fur design...

  7. Transport, environment and sustainability

    DEFF Research Database (Denmark)

    Joumard, Robert; Gudmundsson, Henrik; Kehagia, Fotini

    2010-01-01

    This report is the final report of the action COST 356 'EST - Towards the definition of a measurable environmentally sustainable transport'. It tries to answer the following questions: How can environmental impacts of transport be measured? How can measurements be transformed into operational...... indicators? How can several indicators be jointly considered? And how can indicators be used in planning and decision making? Firstly we provide definition of 'indicator of environmental sustainability in transport'. The functions, strengths and weaknesses of indicators as measurement tools, and as decision...... support tools are discussed. We define what "environmental sustainability in transport" may mean through the transport system, the concepts of sustainable development and of environment. The concept of 'chain of causality' between a source and a final target is developed, as a common reference...

  8. 2005 Environmental Sustainability Index (ESI)

    Data.gov (United States)

    National Aeronautics and Space Administration — The 2005 Environmental Sustainability Index (ESI) is a measure of overall progress towards environmental sustainability, developed for 146 countries. The index...

  9. 2002 Environmental Sustainability Index (ESI)

    Data.gov (United States)

    National Aeronautics and Space Administration — The 2002 Environmental Sustainability Index (ESI) measures overall progress toward environmental sustainability for 142 countries based on environmental systems,...

  10. Involving citizens in sustainable development

    DEFF Research Database (Denmark)

    Agger, Annika

    2010-01-01

    Local Environment The International Journal of Justice and Sustainability, Volume 15 Issue 6, 541......Local Environment The International Journal of Justice and Sustainability, Volume 15 Issue 6, 541...

  11. Wrapping Our Brains around Sustainability

    Directory of Open Access Journals (Sweden)

    Mary Ann Curran

    2009-03-01

    Full Text Available As many of us begin to embrace the concept of sustainability, we realize that it is not simply something that we ‘do.’ Rather, sustainability is a destination that we aspire to reach with the selection of the sustainable pathways that we choose as we proceed along the journey. We are embarking on a new journey with the creation of Sustainability, an on-line, open access journal. As stated on the journal’s website, Sustainability is an international and cross-disciplinary scholarly journal of environmental, cultural, economic and social sustainability of human beings, which provides an advanced forum for studies that are related to sustainability and sustainable development. To genuinely wrap our brains around the impact that our actions have on the sustainability of our planet, we must first understand something of the big picture and have a firm grasp of the terminology. To help further clarify the elusive term ‘sustainability,’ without attempting to provide an exact definition, this paper outlines various, inter-related concepts and basic practices and approaches that are being used in the name of sustainability, including: traditional end-of-pipe control strategies, life cycle, environmental sustainability, urban sustainability, industrial ecology, business sustainability, sustainable supply chain systems, sustainability indicators and metrics, green chemistry and green engineering, design for the environment, sustainable buildings, eco-tourism, and renewable and sustainable energy and fuels.

  12. Innovating for sustainability

    DEFF Research Database (Denmark)

    The theme of the articles is innovating for sustainability. Empirically the articles shows how enterprises makes environmental innovations related to their processes and products within the organic dairy industry, the fish processing industry and the car industry.......The theme of the articles is innovating for sustainability. Empirically the articles shows how enterprises makes environmental innovations related to their processes and products within the organic dairy industry, the fish processing industry and the car industry....

  13. SUSTAINABLE TRAILER FLOORING

    OpenAIRE

    John Lu; Marc Chorney; Lowell Peterson

    2009-01-01

    Different trailer flooring materials, including wood-based, aluminum, steel, and synthetic plastic floors, were evaluated in accordance with their durability and sustainability to our natural environment. Wood-based trailer flooring is an eco-friendly product. It is the most sustainable trailer flooring material compared with fossil fuel-intensive steel, aluminum, and plastics. It is renewable and recyclable. Oak, hard maple, and apitong are strong and durable hardwood species that are curren...

  14. Business travel and sustainability

    OpenAIRE

    AGUILERA, Anne

    2013-01-01

    Although it contributes significantly to the demand for transport, in particular air transport, business travel has been relatively neglected in thinking about the strategies needed to promote more sustainable mobility practices. This paper provides a two-stage approach to this subject. We begin by showing how the sustainability of business travel is relevant not only in environmental terms, but also from an economic and social perspective. In the second stage, we consider the strategies that...

  15. ETHICAL ASPECTS OF SUSTAINABILITY

    OpenAIRE

    Amantova-Salmane, Liene

    2015-01-01

    Ethics can be defined as a reflection on nature and a definition of “the good”. Individuals value qualities and things dissimilarly, most visibly, but they also value their goods in different ways, in different relations to each other, for different reasons, and to different ends. These differences are very applicable to sustainability. In other words, sustainability cannot be achieved without attention to its ethical dimensions. The aim of this research is to examine the ethical aspects of s...

  16. Sustainable development. Uncertain futures

    International Nuclear Information System (INIS)

    Leveque, Ch.; Sciama, Y.

    2005-01-01

    The last 30 years show that the human being did not dominate the Nature. After an introduction on the historical relations between the human and the environment, the authors present the different research ways (irrigation with recovery, renewable energies, new agriculture,...). They show that science is not always the enemy of the sustainable development. The third part presents the constraints that the society puts on the way of the sustainable development, which explain the limitations of the progress. (A.L.B.)

  17. Sustainability, accounting and reporting

    CERN Document Server

    Balachandran, Kashi

    2011-01-01

    The topic of business sustainability is multidisciplinary in nature, and its complexity calls for putting in place a wide variety of research approaches, such as action research, case studies, surveys, model development etc. The papers presented in this ebook represent a comprehensive overview of recent advances in this area of accounting and reporting research. It contains six papers, covering how leasing can increase environmental benefits, CSR, developing social, environmental and economic indicators for SMEs, sustainability reporting and reputation risk and others.

  18. Biofuels and sustainability.

    Science.gov (United States)

    Solomon, Barry D

    2010-01-01

    Interest in liquid biofuels production and use has increased worldwide as part of government policies to address the growing scarcity and riskiness of petroleum use, and, at least in theory, to help mitigate adverse global climate change. The existing biofuels markets are dominated by U.S. ethanol production based on cornstarch, Brazilian ethanol production based on sugarcane, and European biodiesel production based on rapeseed oil. Other promising efforts have included programs to shift toward the production and use of biofuels based on residues and waste materials from the agricultural and forestry sectors, and perennial grasses, such as switchgrass and miscanthus--so-called cellulosic ethanol. This article reviews these efforts and the recent literature in the context of ecological economics and sustainability science. Several common dimensions for sustainable biofuels are discussed: scale (resource assessment, land availability, and land use practices); efficiency (economic and energy); equity (geographic distribution of resources and the "food versus fuel" debate); socio-economic issues; and environmental effects and emissions. Recent proposals have been made for the development of sustainable biofuels criteria, culminating in standards released in Sweden in 2008 and a draft report from the international Roundtable on Sustainable Biofuels. These criteria hold promise for accelerating a shift away from unsustainable biofuels based on grain, such as corn, and toward possible sustainable feedstock and production practices that may be able to meet a variety of social, economic, and environmental sustainability criteria.

  19. Sustainability at BPA 2013

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-12-01

    THIS IS THE THIRD YEAR BPA has reported on sustainability program accomplishments. The report provides an opportunity to review progress made on sustainability initiatives, evaluate how far we have come and how much we can improve. The program has demonstrated maturation as the concepts of sustainability and resource conservation are communicated and understood. The sustainability program started as an employee-driven “grass roots” effort in 2010. Sustainability is becoming a consideration in how work is performed. The establishment of several policies supporting sustainability efforts proves the positive progress being made. In 2009, BPA became a founder and member of The Climate Registry, a nonprofit collaboration that sets standards to calculate, verify and report greenhouse gas emissions. This year, BPA completed and published our Greenhouse Gas inventory for the years of 2009, 2010 and 2011. The 2012 inventory is currently in the process of third-party verification and scheduled for public release in January 2014. These inventories provide a concrete measure of the progress we are making.

  20. Sustainable Biofuels Development Center

    Energy Technology Data Exchange (ETDEWEB)

    Reardon, Kenneth F. [Colorado State Univ., Fort Collins, CO (United States)

    2015-03-01

    The mission of the Sustainable Bioenergy Development Center (SBDC) is to enhance the capability of America’s bioenergy industry to produce transportation fuels and chemical feedstocks on a large scale, with significant energy yields, at competitive cost, through sustainable production techniques. Research within the SBDC is organized in five areas: (1) Development of Sustainable Crops and Agricultural Strategies, (2) Improvement of Biomass Processing Technologies, (3) Biofuel Characterization and Engine Adaptation, (4) Production of Byproducts for Sustainable Biorefining, and (5) Sustainability Assessment, including evaluation of the ecosystem/climate change implication of center research and evaluation of the policy implications of widespread production and utilization of bioenergy. The overall goal of this project is to develop new sustainable bioenergy-related technologies. To achieve that goal, three specific activities were supported with DOE funds: bioenergy-related research initiation projects, bioenergy research and education via support of undergraduate and graduate students, and Research Support Activities (equipment purchases, travel to attend bioenergy conferences, and seminars). Numerous research findings in diverse fields related to bioenergy were produced from these activities and are summarized in this report.

  1. Sustainable IT and IT for Sustainability

    Science.gov (United States)

    Liu, Zhenhua

    Energy and sustainability have become one of the most critical issues of our generation. While the abundant potential of renewable energy such as solar and wind provides a real opportunity for sustainability, their intermittency and uncertainty present a daunting operating challenge. This thesis aims to develop analytical models, deployable algorithms, and real systems to enable efficient integration of renewable energy into complex distributed systems with limited information. The first thrust of the thesis is to make IT systems more sustainable by facilitating the integration of renewable energy into these systems. IT represents the fastest growing sectors in energy usage and greenhouse gas pollution. Over the last decade there are dramatic improvements in the energy efficiency of IT systems, but the efficiency improvements do not necessarily lead to reduction in energy consumption because more servers are demanded. Further, little effort has been put in making IT more sustainable, and most of the improvements are from improved "engineering" rather than improved "algorithms". In contrast, my work focuses on developing algorithms with rigorous theoretical analysis that improve the sustainability of IT. In particular, this thesis seeks to exploit the flexibilities of cloud workloads both (i) in time by scheduling delay-tolerant workloads and (ii) in space by routing requests to geographically diverse data centers. These opportunities allow data centers to adaptively respond to renewable availability, varying cooling efficiency, and fluctuating energy prices, while still meeting performance requirements. The design of the enabling algorithms is however very challenging because of limited information, non-smooth objective functions and the need for distributed control. Novel distributed algorithms are developed with theoretically provable guarantees to enable the "follow the renewables" routing. Moving from theory to practice, I helped HP design and implement

  2. Booster parameter list

    International Nuclear Information System (INIS)

    Parsa, Z.

    1986-10-01

    The AGS Booster is designed to be an intermediate synchrotron injector for the AGS, capable of accelerating protons from 200 MeV to 1.5 GeV. The parameters listed include beam and operational parameters and lattice parameters, as well as parameters pertaining to the accelerator's magnets, vacuum system, radio frequency acceleration system, and the tunnel. 60 refs., 41 figs

  3. Lumped-parameter models

    Energy Technology Data Exchange (ETDEWEB)

    Ibsen, Lars Bo; Liingaard, M.

    2006-12-15

    A lumped-parameter model represents the frequency dependent soil-structure interaction of a massless foundation placed on or embedded into an unbounded soil domain. In this technical report the steps of establishing a lumped-parameter model are presented. Following sections are included in this report: Static and dynamic formulation, Simple lumped-parameter models and Advanced lumped-parameter models. (au)

  4. Delineating a sustainable future

    International Nuclear Information System (INIS)

    Brown, Lester R

    1996-01-01

    The expression Develop Sustainable of wide use today in day is used among national political leaders and among environmentalists. The sustainable economy from the environmental point of view is that that obeys the basic principles or laws of the sustainability; principles so real as those of the aerodynamic one or those of the thermodynamic. If somebody intends, for example, to design an airplane, it will have to be adjusted to the aerodynamic principles and to print to the apparatus a certain stability degree so that it can fly. In the same way, an economic system environmentally sustainable it must respond to the balance principles if it doesn't want to be condemned to the failure. The fundamental laws or sustainability principles are as rigorous as the aerodynamic laws. The society can violate these laws in the short term; but not long term. As well as an airplane can lose height in a brief lapse without falling; the economy can violate the principles of the sustainability in the short term without collapsing. Among of the sustainability principles figure the following: long term; the extinction of species cannot exceed the evolution of the species; the soil erosion cannot exceed the soils formation; the destruction of forests cannot exceed the regeneration of the forests; the emissions of carbon cannot exceed the fixation of carbon; the fishing cannot exceed the regenerative capacity of the banks of fish and, in the human land, the morbidity cannot exceed the mortality. The author also speaks of the disappearance of species, ozone layer, stability of the climate, earth, water fertilizers and alimentary systems among others

  5. Proactive sustainability strategy and corporate sustainability performance: The mediating effect of sustainability control systems.

    Science.gov (United States)

    Wijethilake, Chaminda

    2017-07-01

    This study examines to what extent corporations use sustainability control systems (SCS) to translate proactive sustainability strategy into corporate sustainability performance. The study investigates the mediating effect of SCS on the relationship between proactive sustainability strategy and corporate sustainability performance. Survey data were collected from top managers in 175 multinational and local corporations operating in Sri Lanka and analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM). SCS were observed to only partially mediate the relationship between proactive sustainability strategy and corporate sustainability performance. The mediating effect of SCS is further examined under three sustainability strategies; environmental and social strategies reveal a partial mediation, while the economic strategy exhibits no mediation. The study also finds that (i) a proactive sustainability strategy is positively associated with SCS and corporate sustainability performance and (ii) SCS are positively associated with corporate sustainability performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. APPROACHES FOR SUSTAINABLE MANUFACTURING

    Institute of Scientific and Technical Information of China (English)

    G(U)NTHER Seliger; SEBASTIAN Kernbaum; MARCO Zettl

    2007-01-01

    Sustainable development is a holistic approach harmonizing ecological, economical and socio-political needs with respect to the superior objective of enhancing human living standards. Thereby the availability of natural resources and the conservation of the ecosystems have to be considered that future generations have the possibility to meet their own needs. A long-term economical development demands the transition from a source-sink economy to a cycle economy as a result of limited resources, limited environmental capacities to absorb waste and emissions as well as increasing needs of a growing population. A reference model for sustainability in manufacturing is presented and used to illustrate sustainable approaches with respect to management, technology, process and product. Adaptation of products and components is a vital element for supporting efficient reuse of products and components. Consequently adaptation contributes to the ambitious goals of sustainability. Technological enablers for adaptation as modularity, information and communication technology are exemplarily introduced. Moreover, approaches for disseminating knowledge in sustainability are given.

  7. Sustainable Consumption Dilemmas

    Directory of Open Access Journals (Sweden)

    Kees Vringer

    2017-06-01

    Full Text Available To examine which considerations play a role when individuals make decisions to purchase sustainable product varieties or not, we have conducted a large scale field experiment with more than 600 participating households. Households can vote on whether the budgets they receive should only be spent on purchasing the sustainable product variety, or whether every household in a group is free to spend their budget on any product variety. By conducting several treatments, we tested whether people tend to view sustainable consumption as a social dilemma or as a moral dilemma. We find little support for the hypothesis that social dilemma considerations are the key drivers of sustainable consumption behaviour. Participants seem to be caught in a moral dilemma in which they not only weigh their individual financial costs with the sustainable benefits but they also consider the consequences of restricting other people’s freedom of choice. Complementary survey results further substantiate this claim and show that many people are reluctant to impose restrictions on their peers, but, at the same time, our results also suggest substantial support for the government to regulate the availability of unsustainable product varieties.

  8. Methodology of sustainability accounting

    Directory of Open Access Journals (Sweden)

    O.H. Sokil

    2017-03-01

    Full Text Available Modern challenges of the theory and methodology of accounting are realized through the formation and implementation of new concepts, the purpose of which is to meet the needs of users in standard and unique information. The development of a methodology for sustainability accounting is a key aspect of the management of an economic entity. The purpose of the article is to form the methodological bases of accounting for sustainable development and determine its goals, objectives, object, subject, methods, functions and key aspects. The author analyzes the theoretical bases of the definition and considers the components of the traditional accounting methodology. Generalized structural diagram of the methodology for accounting for sustainable development is offered in the article. The complex of methods and principles of sustainable development accounting for systematized and non-standard provisions has been systematized. The new system of theoretical and methodological provisions of accounting for sustainable development is justified in the context of determining its purpose, objective, subject, object, methods, functions and key aspects.

  9. Sustainability in coastal tourism development

    DEFF Research Database (Denmark)

    Andersen, Ida Marie Visbech; Blichfeldt, Bodil Stilling; Liburd, Janne J.

    2018-01-01

    explicitly requested nominations for sustainable tourism projects. A comparison between academic sustainability discourse and the approved projects suggests that tourism actors do not address sustainable tourism development as a holistic concept. Long-term perspectives are largely absent, whereas economic...... benefits are emphasized. Key findings also indicate weak political leadership in the envisaged transfer towards sustainable tourism development....

  10. Market solutions for sustainable cities

    NARCIS (Netherlands)

    Ursem, Thomas; Nijkamp, Peter

    1995-01-01

    Sustainable development has become a globally accepted policy objective. It is however, increasingly recognized that the implementation of sustainability strategies has to take place at a decentralized level. This has also provoked the idea of urban sustainability. The notion of sustainable city is

  11. Natural resources sustainability: iron ore mining

    International Nuclear Information System (INIS)

    De La Torre de Palacios, Luis

    2011-01-01

    In the present article, a new tool to determine environmental sustainability, the energy impact index (EII) was developed to classify different iron mine projects according to two main parameters including energy consumption and CO 2 emissions. The EII considers the characteristics of the mineral (such as the quality, size, hardness, iron ore grade, reducibility, mineral/waste rate, and type of deposit), mining processes (type of exploitation, ore processing, available technology), and transportation (distance to cover).

  12. Sustainable Supply Chain Design

    DEFF Research Database (Denmark)

    Bals, Lydia; Tate, Wendy

    A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

  13. Nuclear and sustainable development

    International Nuclear Information System (INIS)

    Audebert, P.; Balle, St.; Barandas, Ch.; Basse-Cathalinat, B.; Bellefontaine, E.; Bernard, H.; Bouhand, M.H.; Bourg, D.; Bourgoignon, F.; Bourlat, Y.; Brunet, F.; Buclet, N.; Buquet, N.; Caron, P.; Cartier, M.; Chagneau, E.; Charles, D.; Chateau, G.; Collette, P.; Collignon, A.; Comtesse, Ch.; Crammer, B.; Dasnias, J.; Decroix, G.; Defoy, B.; Delafontaine, E.; Delcroix, V.; Delerue, X.; Demet, M.; Dimmers, G.; Dodivers, S.; Dubigeon, O.; Eimer, M.; Fadin, H.; Foos, J.; Ganiage, D.; Garraud, J.; Girod, J.P.; Gourod, A.; Goussot, D.; Guignard, C.; Heloury, J.; Hondermarck, B.; Hurel, S.; Jeandron, C.; Josse, A.; Lagon, Ch.; Lalleron, Ch.; Laurent, M.; Legrand, H.; Leveau, E.

    2006-01-01

    On September 15. and 16., 2004, at Rene Delcourt invitation, President of the C.L.I. of Paluel and Penly, took place the 4. colloquium of the A.N.C.L.I.. Jean Dasnias, new President of the C.L.I., welcomed the colloquium. Hundred of persons participated. The place of the nuclear power in the energy perspectives of tomorrow, its assets and its weaknesses in front of the other energies and within the framework of a sustainable development, are so many subjects which were discussed. The different tackled subjects are: the stakes in the sustainable development; energy perspectives; the reactors of the fourth generation; nuclear power and transparency; sustainable development and I.R.S.N. (N.C.)

  14. Staircase To Sustainable Development

    Directory of Open Access Journals (Sweden)

    Doorasamy Mishelle

    2015-06-01

    Full Text Available The aim of this article to provide a theoretical framework on the concepts of Sustainable Development and the process that companies need to follow in order to ensure the future sustainability of business operations. Various secondary sources and previous literature was reviewed to clearly identify why companies are finding it difficult to conduct their business operations in a sustainable manner. Stricter legislation and regulations, increased competition, depletion of natural resources and market pressures have placed organisations under increased pressure to improve environmental performance and achieve eco-efficiency. This paper provides comprehensive overview of how companies can achieve the ‘Triple bottom line’ by committing to continuous improvement and adhering to the regulations stipulated according to the International Standards of Organisations (ISO14001.

  15. Sustainable urban development

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Christensen, Toke Haunstrup; Gram-Hanssen, Kirsten

    Sustainability in urban planning has a long history and it has been a widespread solution to build high and compact in order to minimise the need for transportation, land use and heating. Recent research, however, points towards the need for a supplementary approach which includes the consumer...... behaviour of the household. This approach necessarily has to work from below and include the citizens, as it is their daily practices that have to be challenged. This article reviews the literature of to what extent compact cities are the most sustainable and it use lifestyle interpretations of urbane forms...... to challenge the compact cities approach. As an alternative or supplementary approach the article introduce practice theory as a way to understand consumption and it gives examples on how this approach can be used to inspire local authorities to alternative and supplementary strategies of achieving sustainable...

  16. The road to sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Sarrao, John L [Los Alamos National Laboratory; Crabtree, George [ANL

    2009-01-01

    Sustainability is the hottest topic in energy research today, but what does it actually mean? George Crabtree and John Sarrao describe what makes a technology sustainable, and outline the materials-science challenges standing between us and clean, long-lasting energy. Although most people agree that more-sustainable energy technologies are desirable, they often find it harder to agree on exactly how sustainable these technologies need to be, and even precisely what is meant by sustainability. To clarify the debate, we suggest three criteria for sustainability, each of which captures a different feature of the problem. While we do not have the lUxury of achieving full sustainability for all of our next-generation energy technologies, we can use these definitions to select our strategic sustainability targets and track our progress toward achieving them. As will become clear, the most sustainable energy technologies require the most challenging fundamental science breakthroughs. The first criterion for sustainability is 'lasts a long time'. This quality has been a feature of many energy sources we have used historically, including wood in ancient times and oil throughout most of the 20th century. The definition of 'long time' is, of course, relative: the world's demand for energy long ago outpaced the ability of wood to supply it, and the production of oil is likely to peak sometime within the next few decades. Substantial reductions in the rate of oil consumption through higher-efficiency processes can significantly impact on how long non-renewable resources last. In applying the 'long time' criterion, we need to distinguish between energy sources that are effectively limitless and those that are finite but, for the moment, adequate. The second criterion for sustainability is 'does no harm'. Burning fossil fuels releases pollutants such as sulphur and mercury that endanger human health, as well as greenhouse gases like

  17. Citizens in sustainable transitions

    DEFF Research Database (Denmark)

    Hoffmann, Birgitte; Agger, Annika

    2013-01-01

    The paper explores how local public authorities can support and facilitate citizens’ participa-tion and learning in sustainable transition in urban neighbourhoods, by supporting local in-termediaries. The role of intermediaries can be performed by a variety of actors such as public housing...... associations; NGO´s, or semi public institutions. Our claim is that intermediary actors have the potential to facilitate new platforms for citizens’ participation in urban sustainable transition due to their particular role in between public authorities and civil society. The key question of the paper is how...... the intermediary actors facilitate citizens' participatory processes in sustainable urban transitions, and the paper explores the concept of institutional capacity building as a way to develop learning processes and new practises? The aim is to analyse approaches of creating platforms for involving citizens...

  18. Sustainability and sacred values

    Directory of Open Access Journals (Sweden)

    John Cairns Jr.

    2002-09-01

    Full Text Available Successful implementation of the quest for sustainable use of the planet requires that human society both reexamine and expand present views of what is sacred and what is not. The most important aspect will be going beyond a homocentric focus to a biocentric emphasis. A unifying theme would be the desire to leave a habitable planet for human descendants and those of other species. It is unlikely that society can be confident of achieving sustainability until persuasive evidence supporting this belief has existed for several generations. In order for sustainable use of the planet to persist indefinitely, the conditions essential to this state must be morally preserved on sacred grounds. Viewing natural systems as sacred requires not only preventing damage to them but, wherever possible, repairing damage to them caused by humankind.

  19. TOURISM AND SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Gina Ionela Butnaru

    2014-06-01

    Full Text Available Tourism and sustainable development are the subject of many initiatives and public or private debates in Romania. The main problem to which these initiatives try to find an answer is mostly related to the income generation for the local communities by using rationally and efficiently the local potential, in agreement with the economic, social, natural, and cultural factors. Consequently, some measures should be taken, and the tourist sector as a whole needs all the methods of sustainable development: new technologies, change of social behaviour, change of environmental legislation, methods of environmental management, better planning and development of control procedures. In this article, we presented a model of tourism development which should be applied in all the regions of great tourist attraction, and we realised a synthesis of the socio-economic advantages of sustainable tourism.

  20. Geoscience and sustainability

    DEFF Research Database (Denmark)

    Grindsted, Thomas Skou

    2018-01-01

    This paper explores how scientists entangle themselves in between keywords and buzzwords when they make use of concepts like sustainability. It sketches out theoretical distinctions between keywords and buzzwords. Then it turns to the concept of nature discussing the paradox that nature embraces...... the same fuzzy, slippery and contingent character as does sustainability, yet the former has a deep ontological status, the latter does not. The paper explores a related paradox: natural sciences claim we live in the Anthropocene, in which humans have transformed geochemical cycles, e.g. of methane...... and carbon dioxide as much as they changed between glacial and interglacial periods. Yet, science favors (external) nature as a keyword, sustainability as a buzzword. This should cause deep reflections on how scientists make use of the power of reference in between keywords and buzzwords – as well...

  1. Policy for Sustainable Entrepreneurship

    DEFF Research Database (Denmark)

    Watson, Rosina; Nielsen, Kristian Roed; Wilson, Hugh N.

    open innovation with SME entrepreneurs, business execs, academics and policymakers via an online crowdsourcing event with 150 participants. Through inductive analysis of 1,696 text comments, five policy domains are identified: creating awareness/skills; building networks; funding/investing; measuring......Sustainable entrepreneurship—entrepreneurship with social and ecological gains as well as economic ones—can significantly address societal and environmental challenges, however, it is not clear how policy can support it. The authors develop a policy framework for sustainable entrepreneurship, using...... impact/performance; and innovating government. Contributions to entrepreneurship policy literature include measuring impact/performance and open policy innovation for entrepreneurship policy. Contributions to sustainability policy literature include empowering individuals as entrepreneurs and not just...

  2. Managing Sustainability in Fruit Production

    OpenAIRE

    Taragola, N.; Van Passel, S.; Zwiekhorst, W.

    2012-01-01

    As fruit growers are faced with a growing need for sustainable development, it is important to integrate sustainability into their management processes. This research applies and evaluates a self-analysis tool for entrepreneurs called the ‘sustainability scan’. The scan identifies 23 sustainability themes, divided according to the 3P-framework (People, Planet and Profit). In the scan, it is assumed that the management of these themes is at the core of sustainable entrepren...

  3. Hydroelectricity and sustainable development

    International Nuclear Information System (INIS)

    Dubeau, D.

    1995-01-01

    From 1975 to 1992, hydroelectricity helped reduce greenhouse gas emissions in Quebec by 20%. For Hydro-Quebec, energy conservation and hydroelectric development are basic complementary tools for sustainable development. Recent studies show that developing only 50% of economically exploitable hydroelectric potential (30% of the gross theoretical potential) of different regions worldwide would considerably reduce greenhouse gas and SO 2 emissions. However, hydroelectric systems produce environmental and social impacts locally that require mitigative measures. To fulfill its mandate in a sustainable development context, Hydro-Quebec has adopted methods such as integrated resource planning, the assessment of externalities, multi criteria decision tools and public participations

  4. Sustainable building; Duurzaam bouwen

    Energy Technology Data Exchange (ETDEWEB)

    Hendriks, Ch.F. [ed.] [Interfacultair Onderzoek Centrum ' De Ecologische Stad' DIOC, Delft (Netherlands)

    1999-07-01

    A complete overview is given of starting points and targets for the sustainable construction of buildings. The notion of sustainable indicates the necessity of managing specific flows: materials, energy, water and transport (traffic). Also, the monitoring and calculation of environmental effects must be clarified by the generally accepted method of life cycle analysis. This book is for the larger part the result of research carried out at the Interdepartmental Research Centre 'The Ecological City' at the Delft University of Technology in Delft, Netherlands. refs.

  5. Sustainability as Opportunity

    DEFF Research Database (Denmark)

    Lawrence, Joanne; Rasche, Andreas; Kenny, Kevina

    2019-01-01

    Sustainability, as it relates to both social and environmental issues, is treated very differently among companies that incorporate the subject into their business strategies. In this case, we explore sustainability at Unilever whose management addresses it not as a risk to be managed or cost...... product development and marketing expertise, to realise the potential of the fast-growing emerging markets (57% of its 2014 revenues came from emerging markets compared to less than 17% of most multinationals). Issues considered are the role of corporate culture and competencies, the importance...

  6. Engineering sustainable development

    International Nuclear Information System (INIS)

    Prendergast, J.

    1993-01-01

    This article discusses sustainable development, a policy which attempts to balance environmental preservation and economic growth, and promises a way to provide a decent life for Earth's human inhabitants without destroying the global ecosystem. Sustainable development is an effort to use technology to help clean up the mess it helped make, and engineers will be central players in its success or failure. Key aspects include more efficient energy use through conservation measures and switching to renewable sources, waste minimization, much greater recycling and reuse of materials, more comprehensive economic/environmental assessments employing life-cycle analyses, and better management of resources

  7. Physics and sustainable development

    International Nuclear Information System (INIS)

    Emre, B.

    2005-01-01

    Is there a relationship with between physics and sustainable development? The answer of this question is yes since in the past to the health and welfare of people and nations physics has made tremendous contributions. Think of the contributions that physics has made to the world economy in areas such as electronics, materials, and computer technology, also to health x-rays, magnetic resonance imaging and nuclear medicine. However, many of these contributions have benefited people in the developed world more than those in the developing world. Moreover current physics curricula do not have vision of to offer the student a full perspective of sustainable development

  8. Existing Sustainable Renovation Concepts

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Vanhoutteghem, Lies; Gustavsson, Leif

    The Nordic single-family house renovation market is dominated by a craftsman based approach with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses there is......The Nordic single-family house renovation market is dominated by a craftsman based approach with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses...

  9. Consumerism and sustainable tourism

    DEFF Research Database (Denmark)

    Hjalager, Anne Mette

    2000-01-01

    This article recognises the immense and growing interest for the development of a sustainable tourism. However, it demonstrates a gap between general awareness and preferences on the one hand, and the practices and behaviour of tourists and tourist industries on the other hand. The constraints...... for the development of a consumerism in the fields of tourism are addressed in the article. A particular emphasis is put on a lack of appropriate institutional frameworks that provide individual tourists with reliable information and co-ordinate their purchasing power in order to enhance the issues of environmental...... sustainability....

  10. Emergent pedagogy of sustainability

    DEFF Research Database (Denmark)

    Husted, Mia; Frøkjær, Thorleif

    of societal life. Most often, the experimental activities tends to favor learning about responsible behavior, but the intension was formation of critical curiosity. While the difficulties to find pedagogical forms to present sustainability frustrate the participating pedagogues, the teachers teaching student.......S. Nielsen, N. Sriskandarajah, & E. Gunnarsson (eds) (2016). Commons, Sustainability, Democratization: Action Research and the Basic Renewal of Society. New York. RoutledgeLewin, K. (1948). Resolving Social Conflicts. New York, Harper and RowSachs, W. (1999). Planet dialectics. Explorations in Environment...

  11. Sustainability Base Construction Update

    Science.gov (United States)

    Mewhinney, Michael

    2012-01-01

    Construction of the new Sustainability Base Collaborative support facility, expected to become the highest performing building in the federal government continues at NASA's Ames Research Center, Moffet Field, Calif. The new building is designed to achieve a platinum rating under the leadership in Energy and Environment Design (LEED) new construction standards for environmentally sustainable construction developed by the U. S. Green Building Council, Washington, D. C. When completed by the end of 2011, the $20.6 million building will feature near zero net energy consumption, use 90 percent less potable water than conventionally build buildings of equivalent size, and will result in reduced building maintenance costs.

  12. Developing Ecological Sustainability

    DEFF Research Database (Denmark)

    Hedman, Jonas; Henningsson, Stefan

    2016-01-01

    IS initiatives become part of a firm’s overall strategy and part of the organizational sustainability process. We find that Green IS initiatives are initiated through a bottom-up process where environmentally concerned individuals identify issues and become Green IS champions. They use their authority...... and edification skills to promote Green IS to the organizational agenda. If the issue is aligned with the organizational agenda, it receives management’s endorsement. The empirical case also shows two types of systemic feedback that can fuel a self-reinforcing sustainability process. The first type of feedback...

  13. Growth, Development and Sustainability

    Directory of Open Access Journals (Sweden)

    Irina-Virginia Dragulanescu

    2013-11-01

    Full Text Available Describing the relationship of interdependence through the materials balance, will be argued how the economy is a subset of the environment and the environment the natural limit to any economic initiative, or the limits imposed by the laws of thermodynamics. The theoretical debate moves, then, from the concept of growth to that of development, understood this in its three dimensions: economic, social, environmental. Bring the different environmental positions in four versions of sustainability, with the gained awareness that it’s “a spectrum of overlapping sustainability positions from very weak to very strong”.

  14. Sustainable Soil Management

    DEFF Research Database (Denmark)

    Green, Ole; Evgrafova, Alevtina; Kirkegaard Nielsen, Søren

    Linket til højre henviser til rapporten i trykt format til download. This report provides an overview on new technologies for integrate sustainable and resilient management practices in arable ecosystems for advanced farmers, consultants, NGOs and policy makers. By following sustainable soil...... and soil quality in short- and long-terms. This report also illustrates the importance to combine a system approach for plant production by assessing field readiness, managing in-field traffic management, implementing the sitespecific controlled as well as sensor-controlled seedbed preparation, seeding...

  15. Sustainable Energy (SUSEN) project

    International Nuclear Information System (INIS)

    Richter, Jiri

    2012-01-01

    Research Centre Rez and University of West Bohemia started preparatory work on the 'Sustainable Energy' project, financed from EU structural funds. The goals and expected results of the project, its organization, estimated costs, time schedule and current status are described. (orig.)

  16. Governance for sustainability

    NARCIS (Netherlands)

    D.A. Loorbach (Derk)

    2007-01-01

    textabstractSustainable development is rapidly moving from the periphery to the mainstream of politics, business, and science. Over the past several years, a strong consensus has started to emerge that some of the major global problems can only be overcome through large-scale concerted action.

  17. Paying for sustainability

    DEFF Research Database (Denmark)

    Grebitus, Carola; Steiner, Bodo; Veeman, Michele

    2016-01-01

    Increasing environmental concerns of consumers and global supply chains center on the impacts of carbon dioxide emissions and water usage. This study analyzes consumers’ preferences for sustainable products as indicated by water and carbon footprint labels, enabling a rare cross-cultural comparison...... and policy stakeholders in designing targeted footprint labeling initiatives....

  18. Sustainability in SMEs

    DEFF Research Database (Denmark)

    Jahanshahi, Asghar Afshar; Brem, Alexander

    2017-01-01

    with their innovativeness and sustainability orientation. To accomplish this, we surveyed 40 TMTs in Iranian small- and medium-sized enterprises (SMEs) at two points in time. We ran a hierarchical multiple regression in order to test the hypotheses of the study. Building a theoretical model based on the Upper...

  19. Strategic corporate sustainability

    DEFF Research Database (Denmark)

    Grewatsch, Sylvia; Rohrbeck, René; Madsen, Henning

    antecedents and outcomes. To overcome this limitation we propose an integrated typology which may facilitate more research on the link between corporate sustainability performance (CSP) and corporate financial performance (CFP). Our expectation is that the strategy type might play a moderating or mediating...

  20. Sustainable growth in Europe

    International Nuclear Information System (INIS)

    Andreini, P.

    1993-01-01

    The measures till now adopted did not stop environmental deterioration in Europe and the growth of economic activities in the future will make the situation more and more heavy. The European Communities (EEC) Cabinet launched a long term program for a sustainable growth in Europe, which could conciliate economic needs with environmental protection. This paper presents the first part of the program

  1. Sustainable consumption dilemmas

    NARCIS (Netherlands)

    Vringer, Kees; Heijden, Eline Van Der; Soest, Daan Van; Vollebergh, Herman; Dietz, Frank

    To examine which considerations play a role when individuals make decisions to purchase sustainable product varieties or not, we have conducted a large scale field experiment with more than 600 participating households. Households can vote on whether the budgets they receive should only be spent on

  2. Nanotechnologies for sustainable construction

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Andersen, Maj Munch

    2009-01-01

    This chapter aims to highlight key aspects and recent trends in the development and application of nanotechnology to facilitate sustainable construction, use and demolition of buildings and infrastructure structures, ‘nanoconstruction’. Nanotechnology is not a technology but a very diverse...

  3. Environmental sustainability of beef

    Science.gov (United States)

    A national assessment of the sustainability of beef is being conducted in collaboration with the National Cattlemen’s Beef Association through the support of the Beef Checkoff. This includes surveys and visits to cattle operations throughout the U.S. to gather production information. With this infor...

  4. Sustainable Use of Electricity

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1998-01-01

    An overview is presented of the need for keeping electricity consumption low, including a suggested definition of sustainable development. Specific attention is devoted to present and future electricity production´s contribution to the environmental problems. Prognoses are shown from before any...

  5. Why sustain oak forests?

    Science.gov (United States)

    David Wm. Smith

    2006-01-01

    A brief overview and some personal thoughts are offered that deal with the implications of our social and political systems on the long-term sustainability of our forest resources. The connection of the most recent climatic events, in a geologic-time context, to the development of present day oak dominated forests of the Eastern United States is discussed. The impacts...

  6. Assembling Sustainable Territories

    DEFF Research Database (Denmark)

    Vandergeest, Peter; Ponte, Stefano; Bush, Simon

    2015-01-01

    that territorialisation is accomplished not just through (re)defining bounded space, but more broadly through the assembling of four elements: space, subjects, objects, and expertise. Four case studies of sustainability certification in seafood are analyzed to show that ‘green gabbing’ is not necessarily the central...

  7. Environmental Education and Sustainability

    Science.gov (United States)

    Chapman, Paul

    2014-01-01

    In the fall of 2013, Inverness Associates conducted a comprehensive national survey of environmental education and sustainability among private independent schools. The National Association of Independent Schools (NAIS) and 14 regional and state associations supported the research. The survey sought to understand how schools' environmental…

  8. Indicators for environmental sustainability

    DEFF Research Database (Denmark)

    Dong, Yan; Hauschild, Michael Zwicky

    2017-01-01

    . In this study, we reviewed indicators applied in life cycle assessment (LCA), planetary boundary framework (PB), and Sustainable Development Goals (SDGs) developed under United Nation. The aim is to 1) identify their applications and relevant decision context; 2) Review their indicators and categorize them...

  9. Sustainable consumer behaviour

    NARCIS (Netherlands)

    Antonides, Gerrit

    2017-01-01

    We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments,

  10. Partitioning ecosystems for sustainability.

    Science.gov (United States)

    Murray, Martyn G

    2016-03-01

    Decline in the abundance of renewable natural resources (RNRs) coupled with increasing demands of an expanding human population will greatly intensify competition for Earth's natural resources during this century, yet curiously, analytical approaches to the management of productive ecosystems (ecological theory of wildlife harvesting, tragedy of the commons, green economics, and bioeconomics) give only peripheral attention to the driving influence of competition on resource exploitation. Here, I apply resource competition theory (RCT) to the exploitation of RNRs and derive four general policies in support of their sustainable and equitable use: (1) regulate resource extraction technology to avoid damage to the resource base; (2) increase efficiency of resource use and reduce waste at every step in the resource supply chain and distribution network; (3) partition ecosystems with the harvesting niche as the basic organizing principle for sustainable management of natural resources by multiple users; and (4) increase negative feedback between consumer and resource to bring about long-term sustainable use. A simple policy framework demonstrates how RCT integrates with other elements of sustainability science to better manage productive ecosystems. Several problem areas of RNR management are discussed in the light of RCT, including tragedy of the commons, overharvesting, resource collapse, bycatch, single species quotas, and simplification of ecosystems.

  11. Sustainable urban environmental quality

    Directory of Open Access Journals (Sweden)

    Tošković Dobrivoje

    2004-01-01

    Full Text Available MEANING as the essential element of urban quality. The role of the three main factors for the urban quality achievement: PLANNING, DEVELOPMENT and PEOPLE. Next to that, it is important to assume the identity of the local CONTEXT as the essential base for designing and shaping of form development. The problems of the quality achievements in the situation of the permanent changes. In such an environment - the RENEWAL of the towns become the basic strategic orientation requiring - evaluation of the development policy instruments. On the road of changes there are PROBLEMS of a strategic nature which should be, firstly, defined and, then, solved before entering in the process of structuring and arrangement. One of these problems is NEW versus OLD. Transition to a new policy of urbanism relying, first of all, on the private investors and international funds of the local authorities - call for a NEW STRATEGY in urbanism, in the context of the sustainability of environment. The sustainability of quality and the categories of the influencing factors. The sustainability of quality as a twofold process of urban design. The quality of environment as an aesthetic phenomenon. The urban situation and environmental quality: feasibility of changes and effects; the environmental capacity as an indicator and quality determinant. The urban quality and international experience. The evaluation of our urban situation. INSTEAD OF CONCLUSION: A general review on the visions and urban quality policy and planning. Toward an evaluation of urban environmental quality: negative and positive indicators; sustainable communities environmental ruling and urban quality planning.

  12. Sustainability by Default

    NARCIS (Netherlands)

    Wals, Arjen E.J.

    2017-01-01

    In this article, based on a keynote address presented at the 68th OMEP World Assembly and International Conference held in Seoul in July 2016, it is argued that children are more in tune with sustainability than most adults and that both adults and children can benefit from intergenerational

  13. Sustainability through precision agriculture

    Science.gov (United States)

    As population and standard of living increase in many parts of the world, so will the need for food and other agriculturally-based products. To be sustainable, these increases in production must occur with minimum impact on the environment and with efficient use of production resources, including la...

  14. Industrialization for sustainable construction?

    NARCIS (Netherlands)

    Egmond - de Wilde De Ligny, van E.L.C.; Barrett, P; Amaratunga, D.; Haigh, R; Keraminiyage, K.; Pathirage, C

    2010-01-01

    Sustainable construction (SuCo), which genesis dates in the early 1990’s, advocates the creation and operation of a quality and healthy built environment based on resource efficiency, life cycle economics and ecological principles. (Kibert, 2003). Currently the Construction Industry does not meet

  15. Mainstreaming sustainable coffee

    NARCIS (Netherlands)

    Kolk, A.

    2013-01-01

    This overview article examines the various dimensions of sustainable coffee as well as the actors involved and their perceptions of how to advance the market from niche to mainstream. The issues at hand are very complex, with different types of coffee producers, manufacturing/roasting companies and

  16. Sustaining alliances for integrity.

    Science.gov (United States)

    Werhane, P H

    2000-01-01

    Research in business ethics has shown that value-grounded organizations outperform their counterparts in business terms and that industries can successfully regulate themselves. The market in health care, systems theory, and stakeholder analysis are used to generate a set of five potential core values to sustain an Ethics Alliance of Oral Health Organizations.

  17. Transport and Sustainability

    DEFF Research Database (Denmark)

    Jørgensen, Kaj

    1997-01-01

    Ph.D. study of the scope for sustainable transport in Denmark, and particularly of the role of the motor vehicle in this context. The distribution of groceries is used as case study of the introduction of the motor vehicle in Denmark, concluding that this has resulted in increases of the transport...

  18. Sustainable mining management

    International Nuclear Information System (INIS)

    Tejera Oliver, J. L.

    2009-01-01

    Mining activities are carried out by the older man and have provided resources, since ancient times, for their development and progress. With the discovery of fire will show the first metals that have marked the civilizations of copper, bronze and iron, and is the prehistory of the Stone Age tools that man has made from the exploitation of quarries first. The industrial revolution of the nineteenth century is linked to coal and steel, and could not conceiver of todays society without oil and gas, without silicon and coltan. But the mines are often aggressive and, despite their need and what they contribute to the development are answered by the societies where are made. during recent years there has been growing international efforts to try to make the minimum requirements of sustainable exploitation (European Directives, GMI, GRI, etc.) In AENOR, and within the Technical Committee of Standardization 22 Mining and Explosives, chaired by AITEMIN, was established the subcommittee 3, chaired by IGME, where, with the participation of all stake holders, have developed some standards on sustainable mining management sustainable mining that will be a tool available to mining companies to demonstrate their sustainable use to Society. (Author)

  19. The sustainable livelihoods approach

    DEFF Research Database (Denmark)

    Oelofse, Myles; Jensen, Henning Høgh

    2008-01-01

    food chain has on producers and their families, an analysis was conducted of the use of the Sustainable Livelihoods Approach (SLA). The SLA provides a holistic and integrative approach which researchers can use as the overriding frame for their research. The application of the approach is recommended...

  20. Disorder parameter of confinement

    International Nuclear Information System (INIS)

    Nakamura, N.; Ejiri, S.; Matsubara, Y.; Suzuki, T.

    1996-01-01

    The disorder parameter of confinement-deconfinement phase transition based on the monopole action determined previously in SU(2) QCD are investigated. We construct an operator which corresponds to the order parameter defined in the abelian Higgs model. The operator shows proper behaviors as the disorder parameter in the numerical simulations of finite temperature QCD. (orig.)

  1. Sustainability issues in civil engineering

    CERN Document Server

    Saride, Sireesh; Basha, B

    2017-01-01

    This compilation on sustainability issues in civil engineering comprises contributions from international experts who have been working in the area of sustainability in civil engineering. Many of the contributions have been presented as keynote lectures at the International Conference on Sustainable Civil Infrastructure (ICSCI) held in Hyderabad, India. The book has been divided into core themes of Sustainable Transportation Systems, Sustainable Geosystems, Sustainable Environmental and Water Resources and Sustainable Structural Systems. Use of sustainability principles in engineering has become an important component of the process of design and in this context, design and analysis approaches in civil engineering are being reexamined to incorporate the principles of sustainable designs and construction in practice. Developing economies are on the threshold of rapid infrastructure growth and there is a need to compile the developments in various branches of civil engineering and highlight the issues. It is th...

  2. Sustainability of Fossil Fuels

    Science.gov (United States)

    Lackner, K. S.

    2002-05-01

    For a sustainable world economy, energy is a bottleneck. Energy is at the basis of a modern, technological society, but unlike materials it cannot be recycled. Energy or more precisely "negentropy" (the opposite of entropy) is always consumed. Thus, one either accepts the use of large but finite resources or must stay within the limits imposed by dilute but self-renewing resources like sunlight. The challenge of sustainable energy is exacerbated by likely growth in world energy demand due to increased population and increased wealth. Most of the world still has to undergo the transition to a wealthy, stable society with the near zero population growth that characterizes a modern industrial society. This represents a huge unmet demand. If ten billion people were to consume energy like North Americans do today, world energy demand would be ten times higher. In addition, technological advances while often improving energy efficiency tend to raise energy demand by offering more opportunity for consumption. Energy consumption still increases at close to the 2.3% per year that would lead to a tenfold increase over the course of the next century. Meeting future energy demands while phasing out fossil fuels appears extremely difficult. Instead, the world needs sustainable or nearly sustainable fossil fuels. I propose the following definition of sustainable under which fossil fuels would well qualify: The use of a technology or resource is sustainable if the intended and unintended consequences will not force its abandonment within a reasonable planning horizon. Of course sustainable technologies must not be limited by resource depletion but this is only one of many concerns. Environmental impacts, excessive land use, and other constraints can equally limit the use of a technology and thus render it unsustainable. In the foreseeable future, fossil fuels are not limited by resource depletion. However, environmental concerns based on climate change and other environmental

  3. Assessing the global sustainability of different electricity generation systems

    International Nuclear Information System (INIS)

    Cartelle Barros, Juan José; Lara Coira, Manuel; Cruz López, María Pilar de la; Caño Gochi, Alfredo del

    2015-01-01

    A model is presented for assessing the global sustainability of power plants. It uses requirement trees, value functions and the analytic hierarchy process. The model consists of 27 parameters and makes it possible to obtain a sustainability index for each conventional or renewable energy plant, throughout its life-cycle. Here the aim is to make society aware of the sustainability level for each type of power system. As a result, decision making can be done with greater objectivity in both the public and private sectors. The model can be useful for engineers, researchers and, in general, decision makers in the energy policy field. With the exception of biomass fuels, the results obtained reinforce the idea that renewable energies make a greater contribution to sustainable development than their conventional counterparts. Renewable energies have a sustainability index that varies between 0.39 and 0.80; 0 and 1 being the lowest and highest contribution to sustainability, respectively. On the other hand, conventional power plants obtained results that fall between 0.29 and 0.57. High temperature solar-thermal plants, wind farms, photovoltaic solar plants and mini-hydroelectric power plants occupy the first four places, in this order. - Highlights: • A model for assessing the integral sustainability of power plants is proposed. • Different energy alternatives are ordered according to sustainability criteria. • Except for biomass, renewable energies contribute more to sustainable development. • The model aids the decision making process in the energy policy field

  4. The sustainable company: new challenges and strategies for more sustainability

    Directory of Open Access Journals (Sweden)

    Victor DANCIU

    2013-09-01

    Full Text Available The sustainability becomes a model of development only if countries, industries, businesses and citizens become sustainable. The contribution of the business to a promising future should come from a fully integrated sustainability in its DNA and strategies.This paper focuses on the needed sustainable strategies for scaling up the contribution of the companies to sustainable development in the future. At the beginning, we analyze the main theoretical points of view on sustainability. Then, we explain how companies could achieve the sustainability by following the steps of a difficult process and the present performances in sustainability of large companies around the world. Finally, we suggest four strategies that businesses could design and implement in order to scaling up their sustainability in the future.The research has two important conclusions on sustainability in business. One is that the sustainability pays off if it is integrated in the DNA of the companies. The other conclusion says that the companies will succeed to make the needed transformation for achieving a better sustainability in the future only if they design and perform strategies focused on improving sustainability.

  5. Sustainable Geophysical Observatory Networks

    Science.gov (United States)

    Willemann, R. J.; Lerner-Lam, A.; Aster, R.; Beck, S.; Ekstrom, G.; Nyblade, A.; Sandvol, E.

    2007-05-01

    Geophysical networks are defined not only by their technical specifications, but also by the characteristics and needs of the communities that use them. Growing populations supported by more elaborate urban infrastructure with its fine-grained socio-economic interdependencies and relying on global and regional connections for sustainability make new demands for natural hazard risk management. Taking advantage of advances in the underlying science to provide society with accurate risk assessments often requires higher fidelity measurements, entirely new types of observations, and an evolutionary sense of data products and information management. Engineering a high-tech system to address stakeholder needs is difficult, and designing for unpredictable developments requires an emphasis on adaptation. Thus, it is essential to promote formation of organizations or communities that can support evolution of a technological system, imagine new uses, and develop the societal relationships that sustain operations and provide capital for improvement. The owners must have a deep understanding of why the system works in particular ways and how to manage data products for the benefits of stakeholders. To be effective, community promotion must be sustained over a longer period of time than required to build a network and should be aimed at integrating the community into worldwide partnerships. Practices that can promote community formation if they are sustained include repeated training and scientific exchange workshops, extended visits by experts and staff at all levels to and from countries where networks are installed, mechanisms that make timely upgrades realistically possible, and routine exchange and wide dissemination of data in all directions. The combination of international research and educational collaborations, supported by open data exchange, with regionalized and specific assessments of local stakeholder needs and concerns, provides a sustainable model for

  6. Marketing Sustainable Retail Development

    Directory of Open Access Journals (Sweden)

    Dragan Ilić

    2013-06-01

    Full Text Available One of the primary benefits of sustainable retail over the long run has to be the marketing gain from having something other competitors do not: lower operating costs, a more socially responsible public profile, ease of gaining planning approval for new projects, better access to certain investment pools, higher rents (in the case of developers, ease of recruiting and retaining key people. Each of these benefits needs marketing and public relations support; each benefits from a clear and consistent corporate message that promotes sustainable retail. To date, there are very few retailers or developers who have championed sustainability long enough, consistently enough and with enough actual demonstration of changes in standard operations to gain the benefits of green marketing, but the very paucity of examples serves to underscore the point: the green marketing space is wide open for large retailers and developers. What would be the marketing steps that a company could take to benefit from its “sustainability focus?” The key to any marketing program is to differentiate a company’s actions from those of competitors and to do it along lines that its various stakeholders care about. This practice of differentiation is often expressed as “finding a difference that makes a difference, to someone who makes difference to you.” For retail developers, the first differentiator should be to attract more and better tenants to all of their centers, tenants who value lower operating costs and the developer’s program of sustainable development and corporate social responsibility.

  7. The Globe Sustained: Shakespeare’s allegory for sustainable development

    NARCIS (Netherlands)

    Casteren van Cattenburch, Iris

    2017-01-01

    Sustainability theory shows that the sustainability problem is a value orientation problem. In a recent study, Klaas van Egmond identified an underlying pattern of a crossed circle, representing affirmative and adversative value orientations, whose disintegration engenders unsustainable tendencies.

  8. Advancing a sustainable highway system : highlights of FHWA sustainability activities

    Science.gov (United States)

    2014-06-01

    FHWA is undertaking a significant amount of work related to sustainability across a number of program areas throughout the Agency. The purpose of this report is to showcase some of the ways in which FHWA is incorporating and embedding sustainability ...

  9. Textiles and clothing sustainability sustainable textile chemical processes

    CERN Document Server

    2017-01-01

    This book highlights the challenges in sustainable wet processing of textiles, natural dyes, enzymatic textiles and sustainable textile finishes. Textile industry is known for its chemical processing issues and many NGO’s are behind the textile sector to streamline its chemical processing, which is the black face of clothing and fashion sector. Sustainable textile chemical processes are crucial for attaining sustainability in the clothing sector. Seven comprehensive chapters are aimed to highlight these issues in the book.

  10. Textiles and clothing sustainability sustainable fashion and consumption

    CERN Document Server

    2017-01-01

    This is the first book to introduce and explain the concept of sustainable consumption with reference to the clothing sector. It uses various case studies to detail sustainable consumption behavior in the industry. Consumption is a key issue and is a major driver when it comes to sustainability in any industry, including clothing sector. Several studies which have highlighted the need for sustainable consumption in the clothing sector are discussed in this book.

  11. PATHWAYS TO SUSTAINABLE BANKING MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Dragan (Santamarian Oana Raluca

    2012-12-01

    Full Text Available This paper describes one of the major challenges of the future: the sustainable development of the society. Sustainability is now increasingly recognized as central to the growth of emerging market economies. For the banking sector, this represents both a demand for greater social and environmental responsibility as well as a new landscape of business opportunity. Several years ago, the main part of the banks did not consider the social and environmental problems relevant for their operations. Recently, the banks began to realize the major impact of the sustainable development over the way of ulterior development of the society and, implicitly over the way of creating of the banking value in the future. In this context, the development of a banking management system, based on sustainable principles represents one of the provocations of these days.Starting from literature in the sustainable banking management field in this paper are presented several relevant issues related to risk management in the context of sustainable banking financing: the need to implement the sustainable management principles in financial and banking industry; the role of banks in sustainable development of society; social and environmental risk management policies, events that have shaped the role of the banking sector in sustainable development; international standards regarding sustainable banking management such us: Equator Principles for sustainable investment projects’ financing or GRI principles for sustainable reporting. Furthermore, we developed a practical case study related to the implementation of sustainable banking management at Bank of America.

  12. No-Self, Natural Sustainability and Education for Sustainable Development

    Science.gov (United States)

    Wang, Chia-Ling

    2017-01-01

    This article explores the significance of sustainability and several ways in which education for sustainable development (ESD) can be considered. It presents several issues related to the theories of sustainability and ESD, which are generated based on a firm concept of anthropocentrism. ESD has been used for developing a scientific understanding…

  13. Corporate Sustainability Reporting in the BIST Sustainability Index

    Directory of Open Access Journals (Sweden)

    Burcu Demirel

    2016-11-01

    Full Text Available In recent years, there is a growing focus on corporate operations especially since the publication of the first environmental reports in 1989. Companies have started to publish information about its environmental, social and sustainability policies. The study examines the sustainability reporting elements of Borsa Istanbul Sustainability Index (BIST in Turkey and to evaluate which elements is most vital in this context. This study will begin with the sustainability reporting that will be examined under the roof of corporation sustainability and end with the examination of sustainability reports of 15 firms, which are included in the BIST Sustainability Index in Turkey, and a content analysis. The reports of companies under study were taken from special web site and GRI (Global Reporting Initiative database of companies. Being the first study in examining the sustainability report of companies in BIST Sustainability Index, it is expected to contribute in literature about sustainability reporting recently started to gain importance in Turkey. Overall our findings suggest that the sustainability index established in Turkey is still in development stage, but the enterprises in the endeavor are working day by day to develop the sustainability qualities.

  14. THE JUDICIARY AND SUSTAINABLE DEVELOPMENT ...

    African Journals Online (AJOL)

    RAYAN_

    ABSTRACT. The approval of 17 goals and 169 targets for sustainable development by the ... commentary evaluates the role of the judiciary in promoting sustainable .... a healthy quality of life, imposing on the Public Power and the community.

  15. Towards Sustainable Flow Management - Introduction

    DEFF Research Database (Denmark)

    Moss, Timothy; Elle, Morten

    2001-01-01

    Outlines the conditions for the three Local Agenda 21 case-studies in the Sustainable Flow Management project......Outlines the conditions for the three Local Agenda 21 case-studies in the Sustainable Flow Management project...

  16. Towards Sustainable Flow Management - Introduction

    DEFF Research Database (Denmark)

    Moss, Timothy; Elle, Morten

    1998-01-01

    Outlines the conditions for the three Local Agenda 21 case-studies in the Sustainable Flow Management Project......Outlines the conditions for the three Local Agenda 21 case-studies in the Sustainable Flow Management Project...

  17. Economic theories of sustainable consumption

    NARCIS (Netherlands)

    Ferrer-i-Carbonell, Ada; Bergh, van den Jeroen C.J.M.

    1999-01-01

    The term `sustainable consumption' denotes the search for consumption patterns that reduce human pressure on the environment and nature. This searchinvolves three levels of research. First, the relationship between consumption, lifestyles and environmental sustainability has to be clarified.

  18. An Evolution of Sustainable Aesthetics

    DEFF Research Database (Denmark)

    Donovan, Elizabeth

    2017-01-01

    . This paper is framed within the understanding that while sustainable architecture has showcased ethical technology, it lacks the holistic aesthetic language needed for the discipline to progress. A discussion of literature concerning sustainability, architecture, and aesthetics, articulating the particularly...

  19. Strategies for Sustainable Energy Development

    DEFF Research Database (Denmark)

    Meyer, Niels I

    2009-01-01

    The paper analyses international strategies for establishing a sustainable energy development. Proposals are given for mitigation of global warming.......The paper analyses international strategies for establishing a sustainable energy development. Proposals are given for mitigation of global warming....

  20. Interpreting Sustainability for Urban Forests

    Directory of Open Access Journals (Sweden)

    Camilo Ordóñez

    2010-06-01

    Full Text Available Incisive interpretations of urban-forest sustainability are important in furthering our understanding of how to sustain the myriad values associated with urban forests. Our analysis of earlier interpretations reveals conceptual gaps. These interpretations are attached to restrictive definitions of a sustainable urban forest and limited to a rather mechanical view of maintaining the biophysical structure of trees. The probing of three conceptual domains (urban forest concepts, sustainable development, and sustainable forest management leads to a broader interpretation of urban-forest sustainability as the process of sustaining urban forest values through time and across space. We propose that values—and not services, benefits, functions or goods—is a superior concept to refer to what is to be sustained in and by an urban forest.

  1. Property company's sustainability goals.

    Science.gov (United States)

    Ormsby, Kim

    2014-11-01

    In a keynote presentation on the second morning of this year's Healthcare Estates conference, Kim Ormsby (pictured), national corporate social responsibility (CSR) and sustainability manager at NHS Property Services, discussed how, as part of its broader goals of 'supporting the NHS in delivering clinical services', and 'helping to enhance the experience' of patients visiting its buildings, the organization would continue to pursue and embed in its activities sustainable policies wherever and whenever possible, encouraging both its staff and tenants to take a similar approach. In an informative address, she highlighted some of the key steps the property company had already taken to encourage a proactive approach. Echoing the sentiments of Day One keynote speaker, Julian Hartley (see pages 55-60), she argued that one of the fundamentals to success was wide-ranging staff engagement.

  2. SUSTAINABLE TRAILER FLOORING

    Directory of Open Access Journals (Sweden)

    John Lu

    2009-05-01

    Full Text Available Different trailer flooring materials, including wood-based, aluminum, steel, and synthetic plastic floors, were evaluated in accordance with their durability and sustainability to our natural environment. Wood-based trailer flooring is an eco-friendly product. It is the most sustainable trailer flooring material compared with fossil fuel-intensive steel, aluminum, and plastics. It is renewable and recyclable. Oak, hard maple, and apitong are strong and durable hardwood species that are currently extensively used for trailer flooring. For manufacture, wood-based flooring is higher in energy efficiency and lower in carbon emission than steel, aluminum and plastics. Moreover, wood per se is a natural product that sequesters carbon. Accordingly, using more wood-based trailer flooring is effective to reduce global warming.

  3. Sustainability and specialisation

    Directory of Open Access Journals (Sweden)

    John Cairns Jr.

    2004-05-01

    Full Text Available Society depends heavily on its major universities and independent research organisations for new ideas. Arguable, sustainable use of the planet will require conceptual paradigms unprecedented in human history. Educational systems, especially major universities and research organisations, must produce students in all phases of the educational continuum who are capable of transdisciplinary activities. A much larger group of such students will be required to implement these new undertakings. Until the perception of the need for transdisciplinary education becomes widespread, nothing significant is likely to happen. One major obstacle is the lack of employment for transdisciplinary individuals. A commitment to sustainable use of the planet will provide employment and make better use of increasingly scarce resources.

  4. Sustainable Consumption: Research Challenges

    DEFF Research Database (Denmark)

    Reisch, Lucia A.; Cohen, Maurie J.; Thøgersen, John

    The Board of the Swedish Foundation for Strategic Environmental Research (Mistra) decided in October 2015 that a proposal for a funding application call in the research area of “sustainable consumption” should be drawn up. According to the statutes of Mistra, research funded by the foundation...... international senior researchers in the eld — Lucia A. Reisch, Maurie J. Cohen, John B. Thøgersen and Arnold Tukker (see Appendix 3) — to draft a background report to prepare the call. The group’s tasks were outlined as follows: ► to describe the challenges facing society in this area, and the political (and...... the orientation of a new research program to be used as draft text for the call for funding applications. The aim of this background report is hence to shed light on future research topics within sustainable consumption from a Swedish perspective. The research pro- moted should help to develop Sweden...

  5. Fundamentals of sustainable neighbourhoods

    CERN Document Server

    Friedman, Avi

    2015-01-01

    This book introduces architects, engineers, builders, and urban planners to a range of design principles of sustainable communities and illustrates them with outstanding case studies. Drawing on the author’s experience as well as local and international case studies, Fundamentals of Sustainable Neighbourhoods presents planning concepts that minimize developments' carbon footprint through compact communities, adaptable and expandable dwellings, adaptable landscapes, and smaller-sized yet quality-designed housing. This book also: Examines in-depth global strategies for minimizing the residential carbon footprint, including district heating, passive solar gain, net-zero residences, as well as preserving the communities' natural assets Reconsiders conceptual approaches in building design and urban planning to promote a better connection between communities and nature Demonstrates practical applications of green architecture Focuses on innovative living spaces in urban environments

  6. Mathematics for sustainability

    CERN Document Server

    Roe, John; Jamshidi, Sara

    2018-01-01

    Designed for the 21st century classroom, this textbook poses, refines, and analyzes questions of sustainability in a quantitative environment. Building mathematical knowledge in the context of issues relevant to every global citizen today, this text takes an approach that empowers students of all disciplines to understand and reason with quantitative information. Whatever conclusions may be reached on a given topic, this book will prepare the reader to think critically about their own and other people’s arguments and to support them with careful, mathematical reasoning. Topics are grouped in themes of measurement, flow, connectivity, change, risk, and decision-making. Mathematical thinking is at the fore throughout, as students learn to model sustainability on local, regional, and global scales. Exercises emphasize concepts, while projects build and challenge communication skills. With no prerequisites beyond high school algebra, instructors will find this book a rich resource for engaging all majors in the...

  7. Sustainable Food Consumption

    DEFF Research Database (Denmark)

    Reisch, Lucia; Eberle, Ulrike; Lorek, Sylvia

    2013-01-01

    Contemporary food production and consumption cannot be regarded as sustainable and raises problems with its wide scope involving diverse actors. Moreover, in the face of demographic change and a growing global population, sus-tainability problems arising from food systems will likely become more...... and globalization of agriculture and food processing, the shift of consumption patterns toward more dietary animal protein, the emergence of modern food styles that entail heavily processed products, the growing gap on a global scale between rich and poor, and the paradoxical lack of food security amid an abundance...... of food. These factors are attributable to national and international policies and regulations, as well as to prevalent business prac-tices and, in particular, consumers' values and habits. The most effective ways for affluent societies to reduce the environmental impact of their diets are to reduce...

  8. Sustainable Energy for All

    DEFF Research Database (Denmark)

    - renewable energy and energy efficiency. The promise of renewable energy can only be realised through significant R&D investments on technologies such as solar, biomass, wind, hydropower, geothermal power, ocean energy sources, solar-derived hydrogen fuel coupled with energy storage technologies necessary......Energy crisis is one of the most pressing issues of our century. The world currently invests more than $1 trillion per year in energy, much of it going toward the energy systems of the past instead of building the clean energy economies of the future. Effectively, the provision of energy should...... be such that it meets the needs of the present without compromising the ability of future generations to meet their own needs. Investment in sustainable energy is a smart strategy for growing markets, improving competitiveness, and providing greater equity and opportunity. Sustainable energy has two key elements...

  9. Sustaining a Business

    DEFF Research Database (Denmark)

    Marinova, Svetla Trifonova; Marinov, Marin Alexandrov

    2015-01-01

    The chapter explores how internationalisation accounted for sustained business success during the turbulent time of radical economic, political and social transformation in Eastern Europe. The study adopts a longitudinal approach to exploring the evolution of internationalisation – from a partner......The chapter explores how internationalisation accounted for sustained business success during the turbulent time of radical economic, political and social transformation in Eastern Europe. The study adopts a longitudinal approach to exploring the evolution of internationalisation – from...... system was under way. Dyadic and triadic relationships are investigated by applying sets of theoretical approaches to the creation of an East-West business relationship. They encompass the role of the country’s government, the management of the focal company and the foreign partner. Furthermore, the role...... and the integration of the company into global business structures....

  10. Electricity and sustainable development

    International Nuclear Information System (INIS)

    Martin, D.

    2003-11-01

    The sustainable development is a political project. Its purpose is to erase the contradictions between the requirements of Environment and social development. the first article of the law of February 10, 2000 erects a sustainable electricity. For the first time. a law integrates the environmental requirements into the electrical industry. The starting point of this study is in the observation of the effects of this integration in a central sector for the developed countries. electricity is the motive of social development. However, it is carried by a Network. This network results from the confusion between the energy policy and the rules which aim at ensuring the construction and the management of structures of production and transport. Nevertheless, if the energy policy integrates the requirements of the environment, the structures subject them to a dominant social logic which aim is to satisfy an increasing demand for electricity. (author)

  11. Towards sustainable food production

    DEFF Research Database (Denmark)

    Aramyan, Lusine H; Hoste, Robert; van den Broek, Willie

    2011-01-01

    continuous innovation of supply chain network structures, reconsideration of business processes, relocation of logistics infrastructures and renewed allocation of chain activities to these infrastructures in order to achieve sustainable performances. This paper presents a scenario analysis of the spatial...... of pigs, processing of pork and pork consumption, is used to analyse the scenarios. The results reveal major opportunities for reductions in cost as well as in CO2 equivalent emissions if a European sector perspective is taken and some chain activities are relocated to other countries. However......, as minimizing costs will not always lead to an optimal reduction in CO2 equivalent emissions, a differentiated strategy is needed for the European pork sector to move towards more sustainable production...

  12. Making sustainability work

    International Nuclear Information System (INIS)

    Binswanger, Hans Christoph

    1998-01-01

    Today's economic theory usually neglects the role of nature and environment. To make sustainability work it is, however, essential to (re-)integrate nature into the standard concepts of economics, especially by incorporating natural factors into the production function. It must be acknowledged that economic growth is not (only) the result of technical change but is mainly caused by rising energy-inputs into the economy, and that this is necessarily followed by resource exhaustion and pollution. Therefore, nature must not only be taken into account as a central factor of production but also in the form of environmental quality which is the basis for human quality of life. A numeric example shows that a small, but steady decrease of yearly resource consumption is already apt to redirect the economy on a path of sustainable development

  13. Sustainable tourism types

    OpenAIRE

    Ion-Danut JUGANARU; Mariana JUGANARU; Andreea ANGHEL

    2008-01-01

    Tourism development must be based on sustainability criteria, be long term bearable economically and ethically and socially equitable for the local populations of the destinations. Tourism forms identified by the literature as being “sustainable” are numerous: ecological tourism (ecotourism), green tourism, soft, rural tourism and agrotourism, community tourism, solidarity and responsible tourism, all these opposing to the traditional, mass tourism. According to some specialists only tourism ...

  14. Sustainable Bridge Infrastructure Procurement

    DEFF Research Database (Denmark)

    Safi, Mohammed; Du, Guangli; Simonsson, Peter

    2016-01-01

    The lack of a flexible but systematic approach for integrating lifecycle aspects into bridge investment decisions is a major obstacle hindering the procurement of sustainable bridge infrastructures. This paper addresses this obstacle by introducing a holistic approach that agencies could use...... to procure the most “sustainable” (lifecycle-efficient) bridge through a fair design-build (D-B) tendering process, considering all the main aspects: life-cycle cost (LCC), service life-span, aesthetic demands and environmental impacts (LCA)....

  15. Carbon offsetting: sustaining consumption?

    OpenAIRE

    Heather Lovell; Harriet Bulkeley; Diana Liverman

    2009-01-01

    In this paper we examine how theories of sustainable and ethical consumption help us to understand a new, rapidly expanding type of consumer product designed to mitigate climate change: carbon offsets. The voluntary carbon offset market grew by 200% between 2005 and 2006, and there are now over 150 retailers of voluntary carbon offsets worldwide. Our analysis concentrates on the production and consumption of carbon offsets, drawing on ideas from governmentality and political ecology about how...

  16. Sustainable development report 2005

    International Nuclear Information System (INIS)

    2005-01-01

    The Gaz de France strategic choices and management systems have long been inspired by the principles of sustainable development. This document presents the involvement of the Group in this policy: the profile of the gaz de France group, the highlights 2005, from the strategy to the action, the corporate culture of sharing and the dialogue, the corporate governance, the performance 2005 and indicators and external evaluation. (A.L.B.)

  17. Maintenance in sustainable manufacturing

    Directory of Open Access Journals (Sweden)

    Vladimir Stuchly

    2014-09-01

    Full Text Available Background: Sustainable development is about reaching a balance between economic, social, and environmental goals, as well as people's participation in the planning process in order to gain their input and support. For a company, sustainable development means adoption of such business strategy and actions that contribute to satisfying present needs of company and stakeholders, as well as simultaneous protection, maintenance and strengthening of human and environmental potential which will be needed in the future. This new approach forces manufacturing companies to change their previous management paradigms. New management paradigm should include new issues and develop innovative methods, practices and technologies striving for solving problem of shortages of resources, softening environment overload and enabling development of environment-friendly lifecycle of products. Hence, its realization requires updating existing production models as they are based on previously accepted paradigm of unlimited resources and unlimited regeneration capabilities. Maintenance plays a crucial role because of its impact on availability, reliability, quality and life cycle cost, thus it should be one of the main pillars of new business running model.  Material and methods: The following paper is a result of research on the literature and observation of practices undertaken by a company within maintenance area. Results and conclusions: The main message is that considering sustainable manufacturing requires considerable expanding range of analysis and focusing on supporting processes. Maintenance offers numerous opportunities of decreasing influence of business processes on natural environment and more efficient resources utilization. The goal of maintenance processes realizing sustainable development strategy is increased profitability of exploitation and optimization of total lifecycle cost without disturbing safety and environmental issues. 

  18. Wetlands and Sustainability

    Directory of Open Access Journals (Sweden)

    Richard Smardon

    2014-11-01

    Full Text Available This editorial provides an overview of the special issue “Wetlands and Sustainability”. In particular, the special issue contains a review of Paul Keddy’s book “Wetland Ecology” with specific reference to wetland sustainability. It also includes papers addressing wetland data acquisition via radar and remote sensing to better understand wetland system dynamics, hydrologic processes linked to wetland stress and restoration, coastal wetlands land use conflict/management, and wetland utilization for water quality treatment.

  19. Sustainability and Business Planning

    OpenAIRE

    Joy Davidson

    2017-01-01

    This session will consider the longer term sustainability of ROM services and provide an introduction to Business Model Canvas (BMC) as a tool to help develop a longer term business plan. Working in institutional groups, each group will work together to develop a BMC for their institution. This will be revisited at several stages over the life of the project and updated accordingly. By the end of this session, participants will: •be able to flesh out a Business Model C...

  20. Nanotechnologies for sustainable construction

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Andersen, Maj Munch

    2009-01-01

    This chapter aims to highlight key aspects and recent trends in the development and application of nanotechnology to facilitate sustainable construction, use and demolition of buildings and infrastructure structures, ‘nanoconstruction’. Nanotechnology is not a technology but a very diverse...... technological field which covers many aspects. The chapter therefore seeks to provide a framework for addressing relevant issues of green nanoconstruction and to bring an overview and illustrative examples of current early developments....

  1. MARKETING AND SUSTAINABLE TOURISM

    OpenAIRE

    Silvia Muhcină

    2007-01-01

    Among others, tourism marketing has the purpose to facilitate the process of conceiving and developing those specific tourism products, which better corresponding to different tourists categories' needs. These products are created going from utilization of some natural and human resources, considered as tourism attraction. In the sustainable development spirit, marketers must conceive harmonious tourism product policies; as to satisfy the actual tourists' needs and future tourists generation'...

  2. Science Shaping Sustainable Finance

    Science.gov (United States)

    Rodriguez Osuna, V.; Vorosmarty, C. J.; Koehler, D.; Klop, P.; Spengler, J.; Buonocore, J.; Cak, A. D.; Tessler, Z. D.; Corsi, F.; Green, P. A.; Sánchez, R.

    2017-12-01

    Sustainable investment is confronting a period of rapid growth and fundamental change. However, the methods used to evaluate corporate sustainability are failing to keep pace with this new reality. In contrast to the 1990s when corporate data on pollution or occupational health were not available in the public domain, today's investors can take advantage of rich data streams, owing to voluntary corporate disclosures of their business practices. Yet, the data companies declare are hardly standardized, difficult to verify, and thus run the risk of creating unreliable assertions, a form of "green-washing". A partnership comprising a pension fund, an asset manager and two research universities has created a science-based approach to quantify context and place it into a decision-making framework for investors. We have tested this framework on US$2.5 billion of assets held by a large European pension fund with an initial focus on four domains—water, climate change, human health and food security. Our standardized metrics enable coherent comparison of individual company and portfolios over time. To place a company's impact on water systems or climate change into context requires geographically co-locating company operations, combining these with estimates of industrial emissions or mitigation potential, baseline Earth system science data and geopolitical and demographic statistics. Recent developments regarding the Paris Accord are a warning that progress toward a sustainable future requires rethinking the roles that the public and private sectors can play in effecting meaningful change. The finance sector, if given the proper guideposts, could rapidly transform fraught public policy challenges like climate adaptation or the global loss of biodiversity into business opportunities. By utilizing a science-based yardstick to evaluate and compare companies on the basis of their impacts, attention could be drawn to companies that are verifiably contributing to sustainability.

  3. Armenia's Economic Growth Sustainability

    OpenAIRE

    Hayakawa, Tatsuji

    2015-01-01

    Armenia enjoyed 15 years of uninterrupted high economic growth prior to the global financial crisis in 2009. Investment, particularly in the mining and metallurgy sectors, played a key role as a driver of economic growth. Remittances,mostly from Russia, had an effect in sustaining consumption and boosting construction. Armenia has shown some weaknesses in the external sector, due to demands for natural gas, mineral products, machinery, and equipment. Armenia's exports and FDI suffer from the ...

  4. The Fiction of Sustainability

    DEFF Research Database (Denmark)

    Mubanda Rasmussen, Louise

    research with organisations providing help to "Orphans and Vulnerable Children" in Malawi, this paper discusses how donors, international and local NGOs, and CBOs all participate in keeping alive 'the fiction of sustainability', each for their different reasons. Rather than overt resistance to the power...... of international donors, the processes I discuss reflect how actors from their different positions become skilled in using established policy models and available resources for their own ends....

  5. Humanitarian logistics and sustainability

    CERN Document Server

    Leeuw, Sander; Regattieri, Alberto; Souza, Robert

    2015-01-01

    This contributed volume combines conceptual and strategic research articles dealing with the "why" and "to what end" of sustainable operations in humanitarian logistics, as well as operational research contributions regarding the "how" from the United Nations as well as from researchers and organizations from different countries (Germany, Australia, Singapore, Italy, Denmark, Jordan). The target audience primarily comprises research experts, decision makers  and practitioners in the field, but the book may also be beneficial for graduate students.

  6. Chemistry of sustainable energy

    CERN Document Server

    Carpenter, Nancy E

    2014-01-01

    Energy BasicsWhat Is Energy?Energy, Technology, and SustainabilityEnergy Units, Terms, and AbbreviationsElectricity Generation and StorageOther ResourcesReferencesFossil FuelsFormation of Oil and GasExtraction of Fossil FuelsRefiningCarbon Capture and StorageSummaryOther ResourcesOnline Resources Related to Carbon Capture andSequestrationReferencesThermodynamicsIntroductionThe First Law of ThermodynamicsThe Second Law and Thermodynamic Cycles: the Carnot EfficiencyExerg

  7. Taxation and Sustainability

    OpenAIRE

    Common, Mick S.

    1992-01-01

    Clearly, the question which is the workshop title permits of no single simple answer. This paper addresses it in the particular context of taxation. The argument is that in this context the sustainability debate seems to have had rather little effect on economists' thinking and policy advice. While it is true that taxation is looked upon more favourably than some alternative instruments for environmental policy implementation, there does not appear to have been much in the way of thinking abo...

  8. Sustainability or profitability?

    Energy Technology Data Exchange (ETDEWEB)

    Khennas, Smail; Doig, Alsion [Intermediate Technology, Bourton on Dunsmore, Rugby (United Kingdom)

    1999-10-01

    For small rural communities off-grid, micro-hydro power is often the most cost-effective means of providing electricity. Whether the electricity should be provided without cost to the beneficiaries or whether it should be paid for are the points under discussion. Details of cost and technology of schemes in both Nepal and Sri Lanka show that micro hydro can be sustainable in small isolated communities. (UK)

  9. Implementing Sustainable Development

    OpenAIRE

    Rydin, Y.

    2002-01-01

    This paper highlights the scope for making progress towards sustainable development through changes in current practices and decision-making processes that do not need international agreements. It outlines seven key areas for improving implementation, including: using monitoring and evaluation (and the information these produce) to change attitudes and behaviour; participation that involves the public constructively; better use of “soft” instruments of persuasion and communication; and ensuri...

  10. Sustainable consumer behaviour

    OpenAIRE

    Antonides, Gerrit

    2017-01-01

    We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments, eye tracking, scale development, and contingent valuation. The 12 contributions from authors of 13 different countries show the wide and varied application of consumer research focused on sustainabilit...

  11. Towards Sustainable Development

    DEFF Research Database (Denmark)

    Silva, Victor

    2010-01-01

    GHG emissions can be reduced by shifting travel to a more efficient mode, which can be achieved by offering high quality public transport integrated to land use and density policies. However, there is a scarcity of efficient and low-cost alternatives to improve urban transport and tackle GHG emis......). The review highlights empirical evidence of the development and implementation of creative solutions, which integrate transport infrastructure, land use policies and street design strategies for fostering sustainable mobility and GHG emission reduction....

  12. The sustainability indicators of power production systems

    Energy Technology Data Exchange (ETDEWEB)

    Onat, Nevzat [Vocational School of Technical Studies, Marmara University, Istanbul 34722 (Turkey); Bayar, Haydar [Technical Education Faculty, Marmara University, Istanbul 34722 (Turkey)

    2010-12-15

    One of the most important elements of economical and social development is to provide uninterrupted electric energy to consumers. The increasing world population and technological developments rapidly increase the demand on electric energy. In order to meet the increasing demand for sustainable development, it is necessary to use the consumable resources of the world in the most productive manner and minimum level and to keep its negative effects on human health and environment in the lowest level as much as possible. In this study, alignment of hydrogen fuel cells, hydroelectric, wind, solar and geothermal sourced electric energy systems, in addition to fossil fueled coal, natural gas and nuclear power plants, in respect to sustainability parameters such as CO{sub 2} emission, land use, energy output, fresh water consumption and environmental and social effects is researched. Consequently, it has been determined that the wind and nuclear energy power plants have the highest sustainability indicators. The fuel cells that use hydrogen obtained by using coal and natural gas are determined as the most disadvantageous transformation technologies in respect to sustainability. This study contains an alignment related to today's technologies. Using of renewable energy resources especially in production of hydrogen, output increases to be ensured with nanotechnology applications in photovoltaic systems may change this alignment. (author)

  13. Role of Biocatalysis in Sustainable Chemistry.

    Science.gov (United States)

    Sheldon, Roger A; Woodley, John M

    2018-01-24

    Based on the principles and metrics of green chemistry and sustainable development, biocatalysis is both a green and sustainable technology. This is largely a result of the spectacular advances in molecular biology and biotechnology achieved in the past two decades. Protein engineering has enabled the optimization of existing enzymes and the invention of entirely new biocatalytic reactions that were previously unknown in Nature. It is now eminently feasible to develop enzymatic transformations to fit predefined parameters, resulting in processes that are truly sustainable by design. This approach has successfully been applied, for example, in the industrial synthesis of active pharmaceutical ingredients. In addition to the use of protein engineering, other aspects of biocatalysis engineering, such as substrate, medium, and reactor engineering, can be utilized to improve the efficiency and cost-effectiveness and, hence, the sustainability of biocatalytic reactions. Furthermore, immobilization of an enzyme can improve its stability and enable its reuse multiple times, resulting in better performance and commercial viability. Consequently, biocatalysis is being widely applied in the production of pharmaceuticals and some commodity chemicals. Moreover, its broader application will be further stimulated in the future by the emerging biobased economy.

  14. Strategic Leadership of Corporate Sustainability

    DEFF Research Database (Denmark)

    Strand, Robert

    2014-01-01

    Strategic leadership and corporate sustainability have recently come together in conspicuously explicit fashion through the emergence of top management team (TMT) positions with dedicated corporate sustainability responsibilities. These TMT positions, commonly referred to as 'Chief Sustainability......? What effects do corporate sustainability TMT positions have at their organizations? We consider these questions through strategic leadership and neoinstitutional theoretical frameworks. Through the latter, we also engage with Weberian considerations of bureaucracy. We find that the reasons why...

  15. Environmentally sustainable economic development

    International Nuclear Information System (INIS)

    Jones, M.G.; Woodruffe, J.D.

    1991-01-01

    Shell Canada adopted Sustainable Development in 1990 as the approach to managing the environment. The corporation's president, representing the energy industry on the National Round Table on the Environment and the Economy, provided key direction on the development of the process. This paper reports on national concepts of Sustainable Development principles that were utilized as a starting point, but quickly a Shell specific policy was approved, followed by Corporate Principles and Targets and Undertakings. These are being further developed in both the upstream and downstream with leadership from Resources (E and P) Department. Cascading of Targets and Undertakings has occurred to E and P followed by operating complexes, the drilling sites and the seismic lines. Steps were carefully programmed to learn from specific application before expanding to all areas. All plans are expected to be in place by mid 1992. Place contain short and long term target but focus on a rolling 2 year identification of actions to meet those targets. The plans permit an annual appraisal of accomplishments as well as budgeting for successive years. The move to Sustainable Development planning is a significant shift in industry attitude and approach but demonstrates the ability for the coexistence of environmental and economic demands

  16. Sustainable Urban Transport Planning

    Directory of Open Access Journals (Sweden)

    Boitor Melania R.

    2013-07-01

    Full Text Available Environmental protection has become a common issue in every area, but extremely important for the domains which deal with intensive energy consumption as it is the case of the transportation. Achieving the sustainable cities on the other hand, is also focused on the protection of the environment in order to provide a higher quality of life for the population. Therefore it is considered that by improving the urban transportation planning additional benefits could be provided for both the environment and the sustainable development of the cities. One possibility is to supplement the traditionally land-use plans with the transportrelated zones analysis, where the city is divided in public transport, pedestrian and caroriented zones. Analyzing the transport-related zones of a city is important as it provides additional information in the assessment of the development trend. The process of zoning was conducted for the city of Cluj-Napoca, Romania. In this paper, the outcome of the zoning was analyzed for a more comprehensive review of the urban transport in order to attain a sustainable-oriented approach of the urban area development.

  17. Modeling Sustainable Food Systems.

    Science.gov (United States)

    Allen, Thomas; Prosperi, Paolo

    2016-05-01

    The processes underlying environmental, economic, and social unsustainability derive in part from the food system. Building sustainable food systems has become a predominating endeavor aiming to redirect our food systems and policies towards better-adjusted goals and improved societal welfare. Food systems are complex social-ecological systems involving multiple interactions between human and natural components. Policy needs to encourage public perception of humanity and nature as interdependent and interacting. The systemic nature of these interdependencies and interactions calls for systems approaches and integrated assessment tools. Identifying and modeling the intrinsic properties of the food system that will ensure its essential outcomes are maintained or enhanced over time and across generations, will help organizations and governmental institutions to track progress towards sustainability, and set policies that encourage positive transformations. This paper proposes a conceptual model that articulates crucial vulnerability and resilience factors to global environmental and socio-economic changes, postulating specific food and nutrition security issues as priority outcomes of food systems. By acknowledging the systemic nature of sustainability, this approach allows consideration of causal factor dynamics. In a stepwise approach, a logical application is schematized for three Mediterranean countries, namely Spain, France, and Italy.

  18. Indicators of sustainable tourism

    Directory of Open Access Journals (Sweden)

    Jovičić Dobrica

    2010-01-01

    Full Text Available The indicators, precisely describing the linkages between tourism and the environment, social and cultural base, are not easily available. How ever, some relevant organizations (WTO, EU, OECD, etc., institutions and experts, have been hardly working to create the indicators of sustainable tourism. Whereas the economic objectives are easily defined by the use of the traditional indicators used in national and business economics, it is very difficult to identify widely applicable environmental, social and cultural indicators. In order to stimulate and alleviate the process of sustainable tourism development, EU created the list of comparative indicators of sustainable tourism. In preparing this list, special attention is paid to identification of valid indicators of real tourism impacts on the social and cultural environment (the entire set of traditions, customs, history, hospitality and culture that characterize a given area, that is a very complex task. Assuming the fact that the related indicators have been analyzed in many European countries, this paper is focused on applying the related indicators in research of tourism development in villages of the Kosjerić community. .

  19. Day one sustainability

    Science.gov (United States)

    Orr, John; Ibell, Timothy; Evernden, Mark; Darby, Antony

    2015-05-01

    Emissions reductions targets for the UK set out in the Climate Change Act for the period to 2050 will only be achieved with significant changes to the built environment, which is currently estimated to account for 50% of the UK's carbon emissions. The socio-technological nature of Civil Engineering means that this field is uniquely placed to lead the UK through such adaptations. This paper discusses the importance of interdisciplinary teaching to produce multi-faceted team approaches to sustainable design solutions. Methods for measuring success in education are often not fit for purpose, producing good students but poor engineers. Real-world failures to apply sustainable design present a serious, difficult to detect, and ultimately economically negative situation. Techniques to replace summative examinations are presented and discussed, with the aim of enhancing core technical skills alongside those required for sustainable design. Finally, the role of our future engineers in policy-making is discussed. In addition to carbon, the provision of water and food will heavily influence the work of civil engineers in the coming decades. Leadership from civil engineers with the technical knowledge and social awareness to tackle these issues will be required. This provides both opportunities and challenges for engineering education in the UK.

  20. SUSTAINABLE YACHT TOURISM PRACTICES

    Directory of Open Access Journals (Sweden)

    Figen SEVİNÇ

    2017-06-01

    Full Text Available Yacht tourism has become an important asset for the countries which consider tourism as a means of development due to its environment awareness, national and international investments, the volume of business, employment opportunities, foreign exchange income, socio-economic and socio-cultural impact, and an increasing number of investments and incentives for yacht tourism have made and used in a number of countries. In the presence of such rapid developments, the environmental damage caused by yacht tourism has been of importance for coastal countries, and action plans and special projects involving many countries have been developed in order to enhance the awareness of the sustainability of yacht tourism. Given that environment is not a limited source, it is blatant that national or international sustainable tourism practices have been essential for coastal countries and environmental threats are now so severe that they cannot be overlooked. The purpose of the study is to discuss sustainable tourism practices as a part of the measures to eliminate the negative impacts of yacht tourism and provide relevant suggestions.

  1. If Development, Then Sustainability

    Directory of Open Access Journals (Sweden)

    Bóna Péter

    2015-12-01

    Full Text Available The aim of this study is to explore how the effects of components belonging to the concept of strategic management system influence outstanding achievement and success in the processing industry in Hungary as well as the sustainability success component within that. In order to do that, the study defines the factors having an influence. Thereafter, it explains the successful operation of companies with the help of factors emerging via path analysis using regression models. It uses the balanced scorecard as a tool for success criteria describing success. This is a non-market aspect that has an impact on the whole system, making it of crucial importance. Via the exploration of effects, it can be shown the deliberate use of those factors that generate outstanding results and success from the point of view of sustainability, and thus internal development, customer appreciation, and financial success. By taking the results of the research into consideration, it will also be revealed that success factors in the processing industry in Hungary have the most direct and the largest impact on outstanding sustainability performance.

  2. Sustainable energy development

    International Nuclear Information System (INIS)

    Afgan, N.; Al Gobaisi, D.; Carvalho, M.; Cumo, M.

    1998-01-01

    It is shown that present energy strategy requires adaptation of new criterions to be followed in the future energy system development. No doubt that there is a link between energy consumption and environment capacity reduction. This is an alarming sign, which recently has become the leading theme for our near and distant future. Modern engineering science has to be oriented to those areas which may directly assist in our future energy planning. In this respect, it is demanding need that our attention be oriented to the global aspect og the energy development. Modern technology will help to adopt essential principles of the sustainable energy development. With the appropriate renewable energy resources introduction in our energy future and with the increase of safety of nuclear energy, it will be possible to comply with the main principles to be adapted in the sustainable energy strategy. in order to promote the sustainable energy development the respective education system is required. It was recognized that the present energy education system can not meet future demand for the knowledge dissemination. It was shown that the potential option for the future education system is the distance learning with multimedia telematic system. (authors). 46 refs, 14 figs, 1 tab

  3. Transforming Innovation for Sustainability

    Directory of Open Access Journals (Sweden)

    Melissa Leach

    2012-06-01

    Full Text Available The urgency of charting pathways to sustainability that keep human societies within a "safe operating space" has now been clarified. Crises in climate, food, biodiversity, and energy are already playing out across local and global scales and are set to increase as we approach critical thresholds. Drawing together recent work from the Stockholm Resilience Centre, the Tellus Institute, and the STEPS Centre, this commentary article argues that ambitious Sustainable Development Goals are now required along with major transformation, not only in policies and technologies, but in modes of innovation themselves, to meet them. As examples of dryland agriculture in East Africa and rural energy in Latin America illustrate, such "transformative innovation" needs to give far greater recognition and power to grassroots innovation actors and processes, involving them within an inclusive, multi-scale innovation politics. The three dimensions of direction, diversity, and distribution along with new forms of "sustainability brokering" can help guide the kinds of analysis and decision making now needed to safeguard our planet for current and future generations.

  4. Sustainability curricula in design education

    NARCIS (Netherlands)

    Casais, M.; Christiaans, H.H.C.M.; Almendra, R.

    2012-01-01

    While sustainability in Design finds much attention in the literature, the education of sustainability in Design courses lacks discussion regarding curricula and importance. In an attempt to map the way sustainability is taught in Design Bachelor and Master Courses in the European Union, we began

  5. Educating Professionals for Sustainable Futures

    Directory of Open Access Journals (Sweden)

    Hille Janhonen-Abruquah

    2018-02-01

    Full Text Available The recent discourse on sustainability science calls for interdisciplinary research. The home economics science approach ranges from individual actions to the involvement of communities and societies at large, and thus it can provide important perspectives on cultural sustainability. The aim of the research is to study the linkage between cultural sustainability and service sector education to support the creation of sustainable professions. In the present small-scale empirical study, the food service degree curriculum of a Finnish vocational college and teachers’ group interview data were analyzed to find how cultural sustainability is presented in the curriculum and how it is understood by teachers and integrated into teaching practices. Previous cultural sustainability research identifies four perspectives of cultural sustainability: (1 vitality of cultural traditions; (2 economic starting point; (3 diversity together with maintenance of local culture; and (4 possible influence on the balance between human actions and environment. Findings indicate that sustainability, including cultural sustainability, is integrated in the curriculum and considered important by teachers. Translating these into practice remains a challenge. The balance between human and nature was mostly understood as recycling, use of public transport, sustainable consumption, and taking trips to the nature nearby. Cultural sustainability as a concept is not well known, although themes such as multicultural issues, equality, charity, and environmental responsibility were included in teachers’ practical lessons daily. Feasts and celebrations in learning were opportunities to view cultural sustainability widely. This paper provides a way forward for the teachers to develop further their pedagogical practices.

  6. Sustainability in the Business Case

    NARCIS (Netherlands)

    Ron Schipper; Gilbert Gilbert Silvius

    2012-01-01

    This paper explores the integration of indicators that reflect the concepts of sustainability into business cases and business case evaluation methods. It is based on the observations that sustainability is one of the most important challenges of our time and that sustainable development requires

  7. The sustainable wood production initiative.

    Science.gov (United States)

    Robert. Deal

    2004-01-01

    To address concerns about sustainable forestry in the region, the Focused Science Delivery Program is sponsoring a three year Sustainable Wood Production Initiative. The Pacific Northwest is one of the world's major timber producing regions, and the ability of this region to produce wood on a sustained yield basis is widely recognized. Concerns relating to the...

  8. Sustainability in the food sector

    DEFF Research Database (Denmark)

    Grunert, Klaus G

    2011-01-01

    Consumers have, through their food choices, a major role in bringing about more sustainable food production. However, this presupposes that differences in sustainability are communicated to consumers. Even if food products are eco-labelled and consumers are motivated to support sustainability...

  9. Sustainability in the textile industry

    CERN Document Server

    2017-01-01

    This book examines in detail key aspects of sustainability in the textile industry, especially environmental, social and economic sustainability in the textiles and clothing sector. It highlights the various faces and facets of sustainability and their implications for textiles and the clothing sector.

  10. Organizational citizenship behavior towards sustainability

    OpenAIRE

    Chowdhury, Dhiman Deb

    2013-01-01

    This article extends literature of Organizational Citizenship Behavior (OCB) in the context of corporate sustainability. The author presents the concept of Organizational Citizenship Behavior towards Sustainability (OCBS) as a variant, contending it's appropriateness for today's much needed behavioral competence to implement sustainability measure at organizational level. The formulation of OCBS espouses Organizational Citizenship Behavior (OCB) with a twist. The viewpoint defended that a for...

  11. Cork for sustainable product design

    NARCIS (Netherlands)

    Mestre, A.C.; Gil, L.

    2011-01-01

    Sustainable Product Design is currently accepted as one of the most promising trends in the “Sustainable Development” movement. It is often seen as a facilitation tool to implement Sustainability in practice, by improving the life cycle and eco-efficiency of products, by promoting dematerialization

  12. Deliverable 2 (SustainAQ)

    NARCIS (Netherlands)

    Schneider, O.; Julian, B.; Bosman, R.; Eding, E.

    2009-01-01

    The European Project SustainAQ (Framework 6) aims to identify the limiting factors for the sustainable production of aquatic origin food in Eastern Europe. It focuses on the possible use of Recirculation Aquaculture Systems (RAS) as sustainable method for the production of aquatic animals as

  13. Viral Innovation, Sustainability, and Excellence

    DEFF Research Database (Denmark)

    Edgeman, Rick; Eskildsen, Jacob Kjær

    Enterprises strive to be economically sustainable. In doing so, they either contribute to or detract from environmental and social sustainability. Sustainability is hence multi-dimensional with formulations that include the familiar triple-bottom-line and BEST models. Any assessment regimen for t...

  14. Sustainability: Higher Education's New Fundamentalism

    Science.gov (United States)

    Peterson, Rachelle; Wood, Peter W.

    2015-01-01

    "Sustainability" is a key idea on college campuses in the United States and the rest of the Western world. To the unsuspecting, sustainability is just a new name for environmentalism. This report is the first in-depth critical study of the sustainability movement in higher education. The focus of this study is on how the sustainability…

  15. Sustainable Lifestyle Marketing of Individuals: the Base of Sustainability

    Directory of Open Access Journals (Sweden)

    Mira Rakic

    2015-08-01

    Full Text Available This paper highlights the sustainable lifestyle marketing of an individual (SLMOI. The SLMOI is the activity, a set of institutions and processes for creating, communicating and maintaining the sustainable lifestyle of an individual (SLOI. The SLOI is an individual’s sustainability-oriented pattern of living represented by his or her activities, interests and opinions. The SLOI refers to a sustainable pattern of life (daily activities within the family, a sustainable pattern of consumption, a sustainable pattern of work and production (as employees in organizations and a sustainable pattern of behavior in the society and the environment they live in. The SLOI reflects an individual’s choices with respect to spending time, money and energy in accordance with the sustainable pattern of life. The SLOI stands for sustainable behavioral patterns on the basis of attitudes and values. The purpose of this paper is to investigate the attitudes of the population towards sustainable lifestyles and the SLMOI (performed by different actors and behaviors on the basis of attitudes.Using a face-to-face questionnaire interview, the study was conducted on a sample of 400 citizens of Serbia. There are three key conclusions. First, the SLMOI leads to the SLOI, and the SLOI further leads to sustainability. Second, the creation and maintenance of the SLOI is a long-term process. Third, a holistic approach is needed as well as the engagement of numerous actors in that process of creating and maintaining the SLOI.

  16. Cosmological Parameters 2000

    OpenAIRE

    Primack, Joel R.

    2000-01-01

    The cosmological parameters that I emphasize are the age of the universe $t_0$, the Hubble parameter $H_0 \\equiv 100 h$ km s$^{-1}$ Mpc$^{-1}$, the average matter density $\\Omega_m$, the baryonic matter density $\\Omega_b$, the neutrino density $\\Omega_\

  17. Sustainability dilemmas in emerging economies

    Directory of Open Access Journals (Sweden)

    Rama K. Jayanti

    2014-06-01

    Full Text Available Increasing evidence of climate change is forcing businesses to play an active role in reducing sustainability burdens and preserving resources for future generations. Extant research on sustainability has an exclusive focus on developed countries with stringent environmental regulations and activist scrutiny. Emerging markets present interesting dilemmas since rapid mass urbanisation aimed at raising standards of living poses concomitant threats to environmental health. This round table aimed to showcase best practices in sustainability within the Indian business context. Insights from the discussion regarding sustainability dilemmas provide a fertile ground for bench marking global sustainability best practices.

  18. Catalysis and sustainable (green) chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Centi, Gabriele; Perathoner, Siglinda [Dipartimento di Chimica Industriale ed Ingegneria dei Materiali, University of Messina, Salita Sperone 31, 98166 Messina (Italy)

    2003-01-15

    Catalysis is a key technology to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and a brief assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry is discussed and illustrated via an analysis of some selected and relevant examples. Emphasis is also given to the concept of catalytic technologies for scaling-down chemical processes, in order to develop sustainable production processes which reduce the impact on the environment to an acceptable level that allows self-depuration processes of the living environment.

  19. Sustainability in Fashion Business Operations

    Directory of Open Access Journals (Sweden)

    Tsan-Ming Choi

    2015-11-01

    Full Text Available Under the global trend of sustainability, many companies selling fashion products have to reshape their operational strategies. Over the past few years, we have witnessed many fashion companies going green by re-engineering their business processes and establishing their formal sustainability programs. Many important topics, such as closed-loop supply chain management, corporate social responsibility, and economic sustainability, are all related to sustainable fashion business operations management. This paper provides a brief review of these critical topics, introduces the special issue, and proposes future research areas to achieve sustainable operations management in the fashion business.

  20. Entrepreneurial action, sustainability and bricolage

    DEFF Research Database (Denmark)

    Korsgaard, Steffen T.

    This paper explores the relation between entrepreneurship and sustainability. It is explored whether bricolage, a specific form of entrepreneurial action, is particularly conducive to the creation of sustainable solutions. This question is investigated through a case study of an entrepreneur who...... has a long history of sustainable entrepreneurship in which bricolage plays a central role. The study identifies six distinct forms of bricolage practised by the entrepreneur. Furthermore, it is found that, while there is no direct link between bricolage and sustainability, the two concepts have...... a potentially synergetic relationship between them so that bricolage skills may enhance a sustainable mindset, and vice versa....

  1. A New Agenda for Sustainability

    DEFF Research Database (Denmark)

    Aagaard Nielsen, Kurt

    Two decades after the Brundtland Commission's Report "Our Common Future" adopted the concept of 'sustainable development', this book provides a renewal of the concept exploring the potential for new practices and fields for those involved in sustainability activity. The book addresses a number...... on sustainability. The material dealt with in the book offers a wide variety of perspectives on sustainability and reflects the importance of interdisciplinary and transdiciplinary work in the field. Suggesting targets for future analytical and political efforts in achieving global sustainability, this book offers...

  2. Wrapping Our Brains around Sustainability

    OpenAIRE

    Mary Ann Curran

    2009-01-01

    As many of us begin to embrace the concept of sustainability, we realize that it is not simply something that we ‘do.’ Rather, sustainability is a destination that we aspire to reach with the selection of the sustainable pathways that we choose as we proceed along the journey. We are embarking on a new journey with the creation of Sustainability , an on-line, open access journal. As stated on the journal’s website, Sustainability is an international and cross-disciplinary scholarly journal of...

  3. Towards Life Cycle Sustainability Assessment

    Directory of Open Access Journals (Sweden)

    Marzia Traverso

    2010-10-01

    Full Text Available Sustainability is nowadays accepted by all stakeholders as a guiding principle for both public policy making and corporate strategies. However, the biggest challenge for most organizations remains in the real and substantial implementation of the sustainability concept. The core of the implementation challenge is the question, how sustainability performance can be measured, especially for products and processes. This paper explores the current status of Life Cycle Sustainability Assessment (LCSA for products and processes. For the environmental dimension well established tools like Life Cycle Assessment are available. For the economic and social dimension, there is still need for consistent and robust indicators and methods. In addition to measuring the individual sustainability dimensions, another challenge is a comprehensive, yet understandable presentation of the results. The “Life Cycle Sustainability Dashboard” and the “Life Cycle Sustainability Triangle” are presented as examples for communication tools for both experts and non expert stakeholders.

  4. Assessing the sustainability of egg production systems in The Netherlands.

    Science.gov (United States)

    van Asselt, E D; van Bussel, L G J; van Horne, P; van der Voet, H; van der Heijden, G W A M; van der Fels-Klerx, H J

    2015-08-01

    Housing systems for laying hens have changed over the years due to increased public concern regarding animal welfare. In terms of sustainability, animal welfare is just one aspect that needs to be considered. Social aspects as well as environmental and economic factors need to be included as well. In this study, we assessed the sustainability of enriched cage, barn, free-range, and organic egg production systems following a predefined protocol. Indicators were selected within the social, environmental, and economic dimensions, after which parameter values and sustainability limits were set for the core indicators in order to quantify sustainability. Uncertainty in the parameter values as well as assigned weights and compensabilities of the indicators influenced the outcome of the sustainability assessment. Using equal weights for the indicators showed that, for the Dutch situation, enriched cage egg production was most sustainable, having the highest score on the environmental dimension, whereas free-range egg production gave the highest score in the social dimension (covering food safety, animal welfare, and human welfare). In the economic dimension both enriched cage egg and organic egg production had the highest sustainability score. When weights were attributed according to stakeholder outputs, individual differences were seen, but the overall scores were comparable to the sustainability scores based on equal weights. The provided method enabled a quantification of sustainability using input from stakeholders to include societal preferences in the overall assessment. Allowing for different weights and compensabilities helps policymakers in communicating with stakeholders involved and provides a weighted decision regarding future housing systems for laying hens. © 2015 Poultry Science Association Inc.

  5. What is Sustainability?

    Directory of Open Access Journals (Sweden)

    John Farrington

    2010-11-01

    Full Text Available Sustainability as a policy concept has its origin in the Brundtland Report of 1987. That document was concerned with the tension between the aspirations of mankind towards a better life on the one hand and the limitations imposed by nature on the other hand. In the course of time, the concept has been re-interpreted as encompassing three dimensions, namely social, economic and environmental. The paper argues that this change in meaning (a obscures the real contradiction between the aims of welfare for all and environmental conservation; (b risks diminishing the importance of the environmental dimension; and (c separates social from economic aspects, which in reality are one and the same. It is proposed instead to return to the original meaning, where sustainability is concerned with the well-being of future generations and in particular with irreplaceable natural resources—as opposed to the gratification of present needs which we call well-being. A balance needs to be found between those two, but not by pretending they are three sides of the same coin. Although we use up natural resources at the expense of future generations, we also generate capital (including knowledge which raises future well-being. A major question is to what extent the one compensates for the other. This debate centres around the problem of substitutability, which has been cast into a distinction between ‘weak’ and ‘strong’ sustainability. It is argued that these two do not need to be in opposition but complement one another.

  6. Resource consumption, sustainability, and cancer.

    Science.gov (United States)

    Kareva, Irina; Morin, Benjamin; Castillo-Chavez, Carlos

    2015-02-01

    Preserving a system's viability in the presence of diversity erosion is critical if the goal is to sustainably support biodiversity. Reduction in population heterogeneity, whether inter- or intraspecies, may increase population fragility, either decreasing its ability to adapt effectively to environmental changes or facilitating the survival and success of ordinarily rare phenotypes. The latter may result in over-representation of individuals who may participate in resource utilization patterns that can lead to over-exploitation, exhaustion, and, ultimately, collapse of both the resource and the population that depends on it. Here, we aim to identify regimes that can signal whether a consumer-resource system is capable of supporting viable degrees of heterogeneity. The framework used here is an expansion of a previously introduced consumer-resource type system of a population of individuals classified by their resource consumption. Application of the Reduction Theorem to the system enables us to evaluate the health of the system through tracking both the mean value of the parameter of resource (over)consumption, and the population variance, as both change over time. The article concludes with a discussion that highlights applicability of the proposed system to investigation of systems that are affected by particularly devastating overly adapted populations, namely cancerous cells. Potential intervention approaches for system management are discussed in the context of cancer therapies.

  7. HCI and sustainability

    DEFF Research Database (Denmark)

    Møllenbach, Emilie; Hoff, Jens Villiam; Hornbæk, Kasper

    2012-01-01

    Sustained behavior changes are required to reduce the impact of human society on the environment. Much research on how HCI may help to do so focuses on changing behaviour by providing information directed at an individual or a microstructure (e.g. household). We propose societal macrostructures (e.......g. municipalities) and their interaction with microstructures as a focus for HCI aimed at designing behavior change. We present two ongoing case studies involving municipalities in Denmark and discuss how and why macrostructures may be used in the design of HCI for behavior based environmental suatainability....

  8. Settlement patterns and sustainability

    DEFF Research Database (Denmark)

    Hendriksen, Kåre

    This paper discusses settlement patterns and sustainability. Generally urbanization is recognised as an inevitable development driven by job opportunities, better service supply, education, and health services, and it is argued that this is the main driver for centralisation. Research based...... on economic and demographic studies and a large series of interviews problematize this. In Greenland the historical correlation between settlement pattern and livelihood has been decoupled, so that distributions of jobs and potential earnings to a growing extend is a consequence of political and...

  9. Procurement Sustainability Tensions

    DEFF Research Database (Denmark)

    Fayezi, Sajad; Zomorrodi, Maryam; Bals, Lydia

    2018-01-01

    as stakeholder and institutional theory. Design/methodology/approach: The authors use a multiple case study approach. Data are collected through multiple interviews and archival data from eight case companies in Australia. Findings: The authors identify supply chain and company procurement sustainability...... of institutional distance, can characterize the manifestation of PSTs. Practical implications: The findings are instrumental for managers to make informed decisions when dealing with PSTs, and they pave the way for paradoxical leadership given the increasing importance of simultaneous development and balancing...

  10. Ethics and sustainability

    International Nuclear Information System (INIS)

    Jimenez Mejia, Jose Fernando

    2002-01-01

    It could be said that the concept of sustainability is based on ethic postulates, because it claims to bear in mind the set of necessities of future generations as a control variable for human development models and for consumption patterns. Ethics, in its own, mainly in the spinozist line of thinking, is a philosophical proposal directed to empowering the operations of expression of the beings (not only of the human being). This ethics outlines multiple developments and conceive future generations not as undifferentiated, passive and impotent collectives, but as active and joyful communities, who are sensitive to the possibilities of their own devenir

  11. Sustainable hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Block, D.L.; Linkous, C.; Muradov, N.

    1996-01-01

    This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

  12. Sustainable web ecosystem design

    CERN Document Server

    O'Toole, Greg

    2013-01-01

    This book is about the process of creating web-based systems (i.e., websites, content, etc.) that consider each of the parts, the modules, the organisms - binary or otherwise - that make up a balanced, sustainable web ecosystem. In the current media-rich environment, a website is more than a collection of relative html documents of text and images on a static desktop computer monitor. There is now an unlimited combination of screens, devices, platforms, browsers, locations, versions, users, and exabytes of data with which to interact. Written in a highly approachable, practical style, this boo

  13. Social Health and Sustainability

    DEFF Research Database (Denmark)

    Andersen, Heidi Lene

    2015-01-01

    ?’ (Kickbusch, 2011: p. 7). The empirical case study presented here describes the local planning process of a health project in a deprived community in Copenhagen, Denmark. This setting opened an opportunity for intersectional cooperation and interaction between the municipality’s Environmental and Healthcare...... language in the search for a shared agenda is based in the social aspect of heath and sustainability. The other conclusion is that the search for a shared agenda is in itself a strategy for achieving integration between health and the environmental, economic and social impacts, both within the field...

  14. Crowdfunding for Sustainability

    DEFF Research Database (Denmark)

    Nielsen, Kristian Roed

    benefit entrepreneurs with social and/or environmentally-oriented products. The dissertation employs four articles in order to explore this. The first sets the stage by systematically reviewing the various roles that end-users can adopt within sustainable innovation process. The second serves to present...... a conceptual understanding of how the process of crowdfunding is organized. Finally papers three and four respectively present the dissertation’s empirical evidence. Paper three focuses on uncovering the distributive qualities of reward-based crowdfunding in terms of its ability to increase innovation finance...

  15. Institute for Sustainable Energy

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Ajay [Univ. of Alabama, Tuscaloosa, AL (United States)

    2016-03-28

    Alternate fuels offer unique challenges and opportunities as energy source for power generation, vehicular transportation, and industrial applications. Institute for Sustainable Energy (ISE) at UA conducts innovative research to utilize the complex mix of domestically-produced alternate fuels to achieve low-emissions, high energy-efficiency, and fuel-flexibility. ISE also provides educational and advancement opportunities to students and researchers in the energy field. Basic research probing the physics and chemistry of alternative fuels has generated practical concepts investigated in a burner and engine test platforms.

  16. Focus on sustainability.

    Science.gov (United States)

    Thompson, R J; Godiksen, L; Hansen, G; Gustafson, D J; Brinkerhoff, D W; Ingle, M D; Rounds, T; Wing, H

    1990-01-01

    In recent years, sustainability has become one of the most critical concepts in international development and is having a dramatic impact on the way development is conceptualized and carried out. The US Agency for International Development (USAID) is incorporating this concept into its programs and projects. Factors encouraging sustainability of projects and programs include host government policies that support or constrain program objectives, national and/or local commitment to project goals, managerial leadership that helps shape improved policies, collaboration at all staff levels in program management, financial resources that cover program operational costs, appropriate program technology, integration of the program with the social and cultural setting of the country, community involvement in the program, sound environmental management, technical assistance oriented to transferring skills and increasing institutional capacity, perception by the host country that the project is "effective," training provided by the project to transfer skill needed for capacity-building, integration of the program into existing institutional framework, and external political, economic and environmental factors. Impediments to sustainability are often inherent in the donor agency's programming process. This includes the implicit assumption that program objectives can be accomplished in a relatively short time frame, when in fact capacity-building requires a lengthy commitment. USAID professionals are pressured to show near-term results which emphasize outputs rather than purpose and goal-level accomplishments achievable only after extensive effort. The emphasis on obligating money and on the project paper as a sales document leads project designers to talk with a great deal more certainty about project results than is warranted by the complex development situation. Uncertainty and flexibility should be designed into projects so activities and objects can change as more

  17. BEYOND SUSTAINABILITY: SHOULD WE EXPECT MORE FROM ...

    African Journals Online (AJOL)

    education for sustainability," particu- larly the .... and the need to nurture alternative perspectives. Yet another author ... education for sustainable development or sustain- ability. ..... ing for sustainable tourism: Problems, possibilities and cautious first ...

  18. Developing sustainable transportation performance measures for ALDOT.

    Science.gov (United States)

    2013-06-01

    Sustainable transportation is generally used to refer to transportation that contributes to the sustainable development of the community that owns and uses the system. The Transportation Research Board defines sustainability as: Sustainability is ...

  19. Magnetic S-parameter

    DEFF Research Database (Denmark)

    Sannino, Francesco

    2010-01-01

    We propose a direct test of the existence of gauge duals for nonsupersymmetric asymptotically free gauge theories developing an infrared fixed point by computing the S-parameter in the electric and dual magnetic description. In particular we show that at the lower bound of the conformal window...... the magnetic S-parameter, i.e. the one determined via the dual magnetic gauge theory, assumes a simple expression in terms of the elementary magnetic degrees of freedom. The results further support our recent conjecture of the existence of a universal lower bound on the S parameter and indicates...

  20. Sustainable flood risk management – What is sustainable?

    DEFF Research Database (Denmark)

    Sørup, Hjalte Jomo Danielsen; Brudler, Sarah; Lerer, Sara Maria

    2016-01-01

    Sustainable flood risk management has to be achieved since flood protection is a fundamental societal service that we must deliver. Based on the discourse within the fields of risk management and sustainable urban water management, we discuss the necessity of assessing the sustainability of flood...... risk management, and propose an evaluation framework for doing so. We argue that it is necessary to include quantitative sustainability measures in flood risk management in order to exclude unsustainable solutions. Furthermore, we use the concept of absolute sustainability to discuss the prospects...... of maintaining current service levels without compromising future generation’s entitlement of services. Discussions on the sustainability of different overall flood risk schemes must take place. Fundamental changes in the approaches will require fundamental changes in the mind-sets of practitioners as well...