WorldWideScience

Sample records for exchanger materials research

  1. Next Generation Nuclear Plant Intermediate Heat Exchanger Materials Research and Development Plan (PLN-2804)

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Wright

    2008-04-01

    DOE has selected the High Temperature Gas-cooled Reactor (HTGR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production. It will have an outlet gas temperature in the range of 900°C and a plant design service life of 60 years. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed reactor and use low-enriched uranium, Tri-Isotopic (TRISO)-coated fuel. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. Today’s high-temperature alloys and associated ASME Codes for reactor applications are approved up to 760°C. However, some primary system components, such as the Intermediate Heat Exchanger (IHX) for the NGNP will require use of materials that can withstand higher temperatures. The thermal, environmental, and service life conditions of the NGNP will make selection and qualification of some high-temperature materials a significant challenge. Examples include materials for the core barrel and core internals, such as the control rod sleeves. The requirements of the materials for the IHX are among the most demanding. Selection of the technology and design configuration for the NGNP must consider both the cost and risk profiles to ensure that the demonstration plant establishes a sound foundation for future commercial deployments. The NGNP challenge is to achieve a significant advancement in nuclear technology while at the same time setting the stage for an economically viable deployment of the new technology in the commercial sector soon after 2020. A number of solid solution strengthened nickel based alloys have been considered for

  2. Next Generation Nuclear Plant Steam Generator and Intermediate Heat Exchanger Materials Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Wright

    2010-09-01

    DOE has selected the High Temperature Gas-cooled Reactor (HTGR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production. It will have an outlet gas temperature in the range of 900°C and a plant design service life of 60 years. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed reactor and use low-enriched uranium, Tri-Isotopic (TRISO)-coated fuel. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. Today’s high-temperature alloys and associated ASME Codes for reactor applications are approved up to 760°C. However, some primary system components, such as the Intermediate Heat Exchanger (IHX) for the NGNP will require use of materials that can withstand higher temperatures. The thermal, environmental, and service life conditions of the NGNP will make selection and qualification of some high-temperature materials a significant challenge. Examples include materials for the core barrel and core internals, such as the control rod sleeves. The requirements of the materials for the IHX are among the most demanding. Selection of the technology and design configuration for the NGNP must consider both the cost and risk profiles to ensure that the demonstration plant establishes a sound foundation for future commercial deployments. The NGNP challenge is to achieve a significant advancement in nuclear technology while at the same time setting the stage for an economically viable deployment of the new technology in the commercial sector soon after 2020. A number of solid solution strengthened nickel based alloys have been considered for

  3. Seminar Cum Meeting Report: Codata Task Group for Exchangeable Material Data Representation to Support Research and Education

    Directory of Open Access Journals (Sweden)

    T Ashino

    2008-11-01

    Full Text Available On March 4-5, 2008, the CODATA Task Group for Exchangeable Material Data Representation to Support Research and Education held a two day seminar cum meeting at the National Physical Laboratory (NPL, New Delhi, India, with NPL materials researchers and task group members representing material activities and databases from seven countries: European Union (The Czech Republic, France, and the Netherlands, India, Korea, Japan, and the United States. The NPL seminar included presentations about the researchers' work. The Task Group meeting included presentations about current data related activities of the members. Joint discussions between NPL researchers and CODATA task group members began an exchange of viewpoints among materials data producers, users, and databases developers. The seminar cum meeting included plans to continue and expand Task Group activities at the 2008 CODATA 21st Meeting in Kyiv, Ukraine.

  4. Materials Ontology: An Infrastructure for Exchanging Materials Information and Knowledge

    Directory of Open Access Journals (Sweden)

    Toshihiro Ashino

    2010-06-01

    Full Text Available We have rich information resources for materials science and engineering - raw measurement data, computational simulation methods, digitized handbooks, and digital libraries. However, these resources have a wide variety of formats, terminologies, and concepts, which makes it difficult to find appropriate information for materials design, development, and evaluation. One solution to this problem is to integrate these resources into a computer readable concept map, called a domain ontology, which describes concepts and relationships among the concepts in materials science and engineering. This paper describes a trial that constructs a standard of metadata description using ontology language and demonstrates the validity of this construction through data exchange among heterogeneous material databases. "Materials Ontology," which consists of several sub ontologies corresponding to substance, process, environment, and property, is developed using the ontology language of the Semantic Web, OWL, which enables the definition of a flexible and detailed structure of materials information. A versatile "materials data format" is built on the Materials Ontology as a component of the materials information platform and is applied to exchange data among three different thermal property databases, maintained by two major materials science research institutes in Japan.

  5. Joint research and development and exchange of technology on toxic material emergency response between LLNL and ENEA. 1985 progress report

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, M.H.; Caracciolo, R.

    1986-01-31

    For the past six years, the US Department of Energy, LLNL, and the ENEA, Rome, Italy, have participated in cooperative studies for improving a systems approach to an emergency response following nuclear accidents. Technology exchange between LLNL and the ENEA was initially confined to the development, application, and evaluation of atmospheric transport and diffusion models. With the emergence of compatible hardware configurations between LLNL and ENEA, exchanges of technology and ideas for improving the development and implementation of systems are beginning to emerge. This report describes cooperative work that has occurred during the past three years, the present state of each system, and recommendations for future exchanges of technology.

  6. Nanomodified polymer materials for regenerative heat exchangers

    Science.gov (United States)

    Shchegolkov, Alexander; Shchegolkov, Alexey; Dyachkova, Tatyana

    2017-11-01

    The paper presents thermophysical properties of nanomodified paraffin mixed with polymers as polyethylene or fluoroplastic, which may be effectively used for the development of heat exchange elements of personal protective equipment. It has been experimentally shown that the heat exchangers based on the nanomodified polymer composites have twofold mass compared to the standard regenerative heat exchanger with comparable dimensions. The best result has been obtained on the basis of composite containing polyethylene and paraffin modified with CNTs, which thermal conductivity is 1.6 times higher than forconventional paraffin. The application of carbon nanostructures as the modifiers of heat storage materials improves cooling efficiency by 14.9-17.9 °C by creating more comfortable conditions for breathing via personal protective equipment.

  7. Phase Change Material Heat Exchanger Life Test

    Science.gov (United States)

    Lillibridge, Sean; Stephan, Ryan

    2009-01-01

    Low Lunar Orbit (LLO) poses unique thermal challenges for the orbiting space craft, particularly regarding the performance of the radiators. The IR environment of the space craft varies drastically from the light side to the dark side of the moon. The result is a situation where a radiator sized for the maximal heat load in the most adverse situation is subject to freezing on the dark side of the orbit. One solution to this problem is to implement Phase Change Material (PCM) Heat Exchangers. PCM Heat Exchangers act as a "thermal capacitor," storing thermal energy when there is too much being produced by the space craft to reject to space, and then feeding that energy back into the thermal loop when conditions are more favorable. Because they do not use an expendable resource, such as the feed water used by sublimators and evaporators, PCM Heat Exchangers are ideal for long duration LLO missions. In order to validate the performance of PCM Heat Exchangers, a life test is being conducted on four n-Pentadecane, carbon filament heat exchangers. Fluid loop performance, repeatability, and measurement of performance degradation over 2500 melt-freeze cycles will be performed.

  8. Radiation effects on ion exchange materials

    Energy Technology Data Exchange (ETDEWEB)

    Gangwer, T.E.; Goldstein, M.; Pillay, K.K.S.

    1977-11-01

    An extensive literature review and data compilation has been completed on the radiation-damage of ion exchange resins. The primary goal of the study has been to review the available literature on ion exchange materials used in, as well as those with potential for use in, the nuclear fuel and waste reprocessing areas. The physical and chemical properties of ion exchangers are reviewed. Experimental parameters useful in characterizing the effects of radiation on synthetic ion exchange resins are identified or defined. In compiling the diverse types of data, an effort was made to present the experimental data or experimentally based parameters in a format that would be useful for inter-comparing radiation effects on resins. When subject to radiation there are various general trends or qualitative effects displayed by the different types of resins. These radiation-trends and effects have been formulated into qualitative statements. The present day level of understanding of the behavior of resins under ionizing radiation is too limited to justify quantitative predictive modeling. The limitations and deficiencies of the literature are discussed and the experimentation needed to achieve quantitative modeling are outlined. 14 figs., 108 references.

  9. Isotope research materials

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, M. K.; Young, Jr, F. W.

    1977-10-01

    Preparation of research isotope materials is described. Topics covered include: separation of tritium from aqueous effluents by bipolar electrolysis; stable isotope targets and research materials; radioisotope targets and research materials; preparation of an 241Am metallurgical specimen; reactor dosimeters; ceramic and cermet development; fission-fragment-generating targets of 235UO2; and wire dosimeters for Westinghouse--Bettis. (GHT)

  10. Materials research at CMAM

    Science.gov (United States)

    Zucchiatti, Alessandro

    2013-07-01

    The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autónoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming.

  11. Materials research at CMAM

    Energy Technology Data Exchange (ETDEWEB)

    Zucchiatti, Alessandro [Centro de Micro Analisis de Materiales CMAM, Universidad Autonoma de Madrid, c/ Faraday 3, 28049 Madrid (Spain)

    2013-07-18

    The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autonoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming.

  12. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2002-04-01

    The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel.

  13. The Materiality of Research

    DEFF Research Database (Denmark)

    Meier, Ninna

    2016-01-01

    In this feature essay, Ninna Meier reflects on the materiality of the writing – and re-writing – process in academic research. She explores the ways in which our ever-accummulating thoughts come to form layers on the material objects in which we write our notes and discusses the pleasures of co-authorship....

  14. Materials, Turbomachinery and Heat Exchangers for Supercritical CO2 Systems

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Mark; Nellis, Greg; Corradini, Michael

    2012-10-19

    The objective of this project is to produce the necessary data to evaluate the performance of the supercritical carbon dioxide cycle. The activities include a study of materials compatibility of various alloys at high temperatures, the heat transfer and pressure drop in compact heat exchanger units, and turbomachinery issues, primarily leakage rates through dynamic seals. This experimental work will serve as a test bed for model development and design calculations, and will help define further tests necessary to develop high-efficiency power conversion cycles for use on a variety of reactor designs, including the sodium fast reactor (SFR) and very high-temperature gas reactor (VHTR). The research will be broken into three separate tasks. The first task deals with the analysis of materials related to the high-temperature S-CO{sub 2} Brayton cycle. The most taxing materials issues with regard to the cycle are associated with the high temperatures in the reactor side heat exchanger and in the high-temperature turbine. The system could experience pressures as high as 20MPa and temperatures as high as 650°C. The second task deals with optimization of the heat exchangers required by the S-CO{sub 2} cycle; the S-CO{sub 2} flow passages in these heat exchangers are required whether the cycle is coupled with a VHTR or an SFR. At least three heat exchangers will be required: the pre-cooler before compression, the recuperator, and the heat exchanger that interfaces with the reactor coolant. Each of these heat exchangers is unique and must be optimized separately. The most challenging heat exchanger is likely the pre-cooler, as there is only about a 40°C temperature change but it operates close to the CO{sub 2} critical point, therefore inducing substantial changes in properties. The proposed research will focus on this most challenging component. The third task examines seal leakage through various dynamic seal designs under the conditions expected in the S-CO{sub 2} cycle

  15. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2001-04-01

    The activities of the Reactor Materials Research Department of the Belgian Nuclear Research Centre SCK-CEN in 2000 are summarised. The programmes within the department are focussed on studies concerning (1) fusion, in particular mechanical testing; (2) Irradiation Assisted Stress Corrosion Cracking (IASCC); (3) nuclear fuel; and (4) Reactor Pressure Vessel Steel (RPVS)

  16. Research of Spined Heat-Exchanging Pipes

    Directory of Open Access Journals (Sweden)

    Akulov Kirill

    2016-01-01

    Full Text Available Work is devoted to a research of spined heat-exchanging pipes that are assumed to use in air-cooler exchangers (ACE. The proposed new geometry of finning allows intensifying heat exchange and improving the efficiency of air coolers. It is caused by the increased area of finned surface with a value of finning ratio (the ratio of the area of the smooth pipe to a finned one to 42.7, while in the commercially available ACE, the figure is 22. Besides, the geometrical arrangement of the pin fins turbulizes the airflow. It should be mentioned that an easier method of manufacturing of heat exchanging pipes is proposed to use, which will reduce their costs. The proposed heat exchange pipes are made by winding cut aluminum strip to the supporting pipe or stretching stamped blanks on it. To increase the efficiency of the heat exchange surface pin fins should be as thin and long as possible; however, their strength should be sufficient for deformation-free operation. Fins should be staggered to maximize the distance between them. Spined heat-exchange pipes are designed to operate in a commercially produced ACE and their service is carried out similarly to commercially produced transversely finned pipes.

  17. Exchangers: research axes for the future

    Energy Technology Data Exchange (ETDEWEB)

    Sartre, V.; Lallemand, M. (Institut National des Sciences Appliquees (INSA), 69 - Villeurbanne (France)); Marvillet, C. (CEA Centre d' Etudes de Grenoble, 38 (France))

    1993-11-01

    Energy consumption abatement (Greenhouse effect) and environment protection (Chlorofluorocarbons) are the two un-by-path axes for the development of refrigerating industry. Joule european research project aims to improve the performance of refrigerating machines. the present paper presents actual design and evolution of exchangers. 20 refs., 5 figs., 1 tab.

  18. Thermodynamics of heat-and material-exchange in engineering

    Energy Technology Data Exchange (ETDEWEB)

    Matz, W.

    1944-05-23

    This book-length discussion of thermodynamics emphasized the situation of exchanges of heat and materials during various processes. Within the first chapter (on general foundations) the major headings were Points of view and means of representation, Conditions and characteristics of materials, The first law and energy, The second law and entropy, Equilibrium, and The general similarity-principle in heat-and material-exchange. The second chapter (on heat-and material-exchange in counterflow between two phases) had headings The harmonic triangle diagram, The heat exchanger, Heat exchange by means of procedures of blowing, Heating and cooling processes in vessels, Material exchange in couterflow, and Similarity among friction, heat-and material-exchange. The chapter on exchanges between vapor and liquid in single substances discussed evaporation processes and vapor-air mixtures. There were also chapters on exchanges during distillation, adsorption, absorption, and extraction. There was also an extensive bibliography and a collection of 107 diagrams of various types of representatives of thermodynamic relationships. (Some parts of the book appear out of order on the microfilm reels.) 107 diagrams.

  19. Advanced proton-exchange materials for energy efficient fuel cells.

    Energy Technology Data Exchange (ETDEWEB)

    Fujimoto, Cy H.; Grest, Gary Stephen; Hickner, Michael A.; Cornelius, Christopher James; Staiger, Chad Lynn; Hibbs, Michael R.

    2005-12-01

    The ''Advanced Proton-Exchange Materials for Energy Efficient Fuel Cells'' Laboratory Directed Research and Development (LDRD) project began in October 2002 and ended in September 2005. This LDRD was funded by the Energy Efficiency and Renewable Energy strategic business unit. The purpose of this LDRD was to initiate the fundamental research necessary for the development of a novel proton-exchange membranes (PEM) to overcome the material and performance limitations of the ''state of the art'' Nafion that is used in both hydrogen and methanol fuel cells. An atomistic modeling effort was added to this LDRD in order to establish a frame work between predicted morphology and observed PEM morphology in order to relate it to fuel cell performance. Significant progress was made in the area of PEM material design, development, and demonstration during this LDRD. A fundamental understanding involving the role of the structure of the PEM material as a function of sulfonic acid content, polymer topology, chemical composition, molecular weight, and electrode electrolyte ink development was demonstrated during this LDRD. PEM materials based upon random and block polyimides, polybenzimidazoles, and polyphenylenes were created and evaluated for improvements in proton conductivity, reduced swelling, reduced O{sub 2} and H{sub 2} permeability, and increased thermal stability. Results from this work reveal that the family of polyphenylenes potentially solves several technical challenges associated with obtaining a high temperature PEM membrane. Fuel cell relevant properties such as high proton conductivity (>120 mS/cm), good thermal stability, and mechanical robustness were demonstrated during this LDRD. This report summarizes the technical accomplishments and results of this LDRD.

  20. Anisotropic microporous supports impregnated with polymeric ion-exchange materials

    Science.gov (United States)

    Friesen, Dwayne; Babcock, Walter C.; Tuttle, Mark

    1985-05-07

    Novel ion-exchange media are disclosed, the media comprising polymeric anisotropic microporous supports containing polymeric ion-exchange or ion-complexing materials. The supports are anisotropic, having small exterior pores and larger interior pores, and are preferably in the form of beads, fibers and sheets.

  1. Materials Engineering Research Facility (MERF)

    Data.gov (United States)

    Federal Laboratory Consortium — Argonne?s Materials Engineering Research Facility (MERF) enables engineers to develop manufacturing processes for producing advanced battery materials in sufficient...

  2. Materials Behavior Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The purpose is to evaluate mechanical properties of materials including metals, intermetallics, metal-matrix composites, and ceramic-matrix composites under typical...

  3. Subscale Water Based Phase Change Material Heat Exchanger Development

    Science.gov (United States)

    Sheth, Rubik; Hansen, Scott

    2016-01-01

    Supplemental heat rejection devices are required in many spacecraft as the radiators are not sized to meet the full heat rejection demand. One means of obtaining additional heat rejection is through the use of phase change material heat exchangers (PCM HX's). PCM HX's utilize phase change to store energy in unfavorable thermal environments (melting) and reject the energy in favorable environments (freezing). Traditionally, wax has been used as a PCM on spacecraft. However, water is an attractive alternative because it is capable of storing about 40% more energy per unit mass due to its higher latent heat of fusion. The significant problem in using water as a PCM is its expansion while freezing, leading to structural integrity concerns when housed in an enclosed heat exchanger volume. Significant investigation and development has taken place over the past five years to understand and overcome the problems associated with water PCM HX's. This paper reports on the final efforts by Johnson Space Center's Thermal Systems Branch to develop a water based PCM HX. The test article developed and reported on is a subscale version of the full-scale water-based PCM HX's constructed by Mezzo Technologies. The subscale unit was designed by applying prior research on freeze front propagation and previous full-scale water PCM HX development. Design modifications to the subscale unit included use of urethane bladder, decreased aspect ratio, perforated protection sheet, and use of additional mid-plates. Testing of the subscale unit was successful and 150 cycles were completed without fail.

  4. Database & information tools for transportation research management : Connecticut transportation research peer exchange report of a thematic peer exchange.

    Science.gov (United States)

    2006-05-01

    Specific objectives of the Peer Exchange were: : Discuss and exchange information about databases and other software : used to support the program-cycles managed by state transportation : research offices. Elements of the program cycle include: :...

  5. Materials Ontology: An Infrastructure for Exchanging Materials Information and Knowledge

    National Research Council Canada - National Science Library

    Ashino, Toshihiro

    2010-01-01

    .... However, these resources have a wide variety of formats, terminologies, and concepts, which makes it difficult to find appropriate information for materials design, development, and evaluation...

  6. Carbon Materials Research

    Science.gov (United States)

    2006-08-01

    wt% polyvinyl alcohol (Airvol 2005 PVA,Air Products andChemicals,Allentown, PA). The mixture was uniaxially pressed into bars (11 mm long × 9.9 mm...process. First, carbon fibers, which carry the mechanical load, are woven, braided, felted, or filament wound into a preform which has the shape of the... filaments , injection of brake preforms, and in fab- rication of anode materials for lithium ion batteries. The principle behind the impregnation with in

  7. Energy Materials Research Laboratory (EMRL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energy Materials Research Laboratory at the Savannah River National Laboratory (SRNL) creates a cross-disciplinary laboratory facility that lends itself to the...

  8. Assessment of commercially available ion exchange materials for cesium removal from highly alkaline wastes

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, K.P.; Kim, A.Y.; Kurath, D.E.

    1996-04-01

    Approximately 61 million gallons of nuclear waste generated in plutonium production, radionuclide removal campaigns, and research and development activities is stored on the Department of Energy`s Hanford Site, near Richland, Washington. Although the pretreatment process and disposal requirements are still being defined, most pretreatment scenarios include removal of cesium from the aqueous streams. In many cases, after cesium is removed, the dissolved salt cakes and supernates can be disposed of as LLW. Ion exchange has been a leading candidate for this separation. Ion exchange systems have the advantage of simplicity of equipment and operation and provide many theoretical stages in a small space. The organic ion exchange material Duolite{trademark} CS-100 has been selected as the baseline exchanger for conceptual design of the Initial Pretreatment Module (IPM). Use of CS-100 was chosen because it is considered a conservative, technologically feasible approach. During FY 96, final resin down-selection will occur for IPM Title 1 design. Alternate ion exchange materials for cesium exchange will be considered at that time. The purpose of this report is to conduct a search for commercially available ion exchange materials which could potentially replace CS-100. This report will provide where possible a comparison of these resin in their ability to remove low concentrations of cesium from highly alkaline solutions. Materials which show promise can be studied further, while less encouraging resins can be eliminated from consideration.

  9. Materials Ontology: An Infrastructure for Exchanging Materials Information and Knowledge

    OpenAIRE

    Toshihiro Ashino

    2010-01-01

    We have rich information resources for materials science and engineering - raw measurement data, computational simulation methods, digitized handbooks, and digital libraries. However, these resources have a wide variety of formats, terminologies, and concepts, which makes it difficult to find appropriate information for materials design, development, and evaluation. One solution to this problem is to integrate these resources into a computer readable concept map, called a domain ontology, whi...

  10. Smart Materials Research at NRL

    Science.gov (United States)

    Matic, Peter

    1996-01-01

    This presentation covers the use of smart materials in Naval Research Laboratory (NRL) research for sensors, actuators, and modeling and control. Emphasis is on optical fiber Bragg gratings, piezoelectric actuators, shape memory alloy actuators, and polymer matrix and interfaces.

  11. The Materiality of Research

    DEFF Research Database (Denmark)

    Meier, Ninna

    2016-01-01

    In this feature essay, Ninna Meier explores the relationship between time, space and academic writing. She ponders the ‘portable magic’ of research: namely, the capacity for our thoughts to be both grounded in a particular point in time and space and yet simultaneously ‘free from these dimensions...

  12. Intelligent transportation system (ITS) international research exchange.

    Science.gov (United States)

    2014-01-01

    ITS applications address surface transportation challenges in safety, mobility, and : sustainability that are similar in cause and impact worldwide. International ITS : exchange allows cooperating nations to benefit from each others pre-competitiv...

  13. Continued Water-Based Phase Change Material Heat Exchanger Development

    Science.gov (United States)

    Hansen, Scott W.; Sheth, Rubik B.; Poynot, Joe; Giglio, Tony; Ungar, Gene K.

    2015-01-01

    In a cyclical heat load environment such as low Lunar orbit, a spacecraft's radiators are not sized to meet the full heat rejection demands. Traditionally, a supplemental heat rejection device (SHReD) such as an evaporator or sublimator is used to act as a "topper" to meet the additional heat rejection demands. Utilizing a Phase Change Material (PCM) heat exchanger (HX) as a SHReD provides an attractive alternative to evaporators and sublimators as PCM HX's do not use a consumable, thereby leading to reduced launch mass and volume requirements. In continued pursuit of water PCM HX development two full-scale, Orion sized water-based PCM HX's were constructed by Mezzo Technologies. These HX's were designed by applying prior research on freeze front propagation to a full-scale design. Design options considered included bladder restraint and clamping mechanisms, bladder manufacturing, tube patterns, fill/drain methods, manifold dimensions, weight optimization, and midplate designs. Two units, Units A and B, were constructed and differed only in their midplate design. Both units failed multiple times during testing. This report highlights learning outcomes from these tests and are applied to a final sub-scale PCM HX which is slated to be tested on the ISS in early 2017.

  14. Research implementation and leadership engagement : 2012 UDOT research peer exchange, Oct. 29th-31st, 2012.

    Science.gov (United States)

    2012-12-01

    This report discusses the proceedings and recommendations of the 2012 UDOT Research Peer Exchange. The : 2012 UDOT Research Peer Exchange took place in October of 2012. Representatives from eight different : state DOTs, as well as representatives fro...

  15. The Representation and Exchange of Material and Other Engineering Properties

    Directory of Open Access Journals (Sweden)

    Norman Swindells

    2009-09-01

    Full Text Available The representation of information and its exchange in a communication requires the use of a common information model to define the semantics and syntax of the representation and a common dictionary to define the meaning of the data items. These fundamental concepts are the basis of the new standard ISO 10303-235: 'Engineering properties for product design and verification' for the computer representation and exchange of material and any other engineering properties of a product and to provide an audit trail for the derivation of the property value. A related dictionary conforming to ISO 13584 can define testing methods and their properties and enable the information model to be used for any property of any product.

  16. Research on Heterogeneous Data Exchange based on XML

    Science.gov (United States)

    Li, Huanqin; Liu, Jinfeng

    Integration of multiple data sources is becoming increasingly important for enterprises that cooperate closely with their partners for e-commerce. OLAP enables analysts and decision makers fast access to various materialized views from data warehouses. However, many corporations have internal business applications deployed on different platforms. This paper introduces a model for heterogeneous data exchange based on XML. The system can exchange and share the data among the different sources. The method used to realize the heterogeneous data exchange is given in this paper.

  17. High Pressure Research on Materials

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 6. High Pressure Research on Materials - Production and Measurement of High Pressures in the Laboratory. P Ch Sahu N V Chandra Shekar. General Article Volume 12 Issue 6 June 2007 pp 10-23 ...

  18. West Indian Ocean Deltas Exchange and Research Network | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The West Indian Ocean Deltas Exchange and Research Network (WIoDER) aims to support research, training, and pilot interventions in up to four Western Indian Ocean river deltas under pressure from human activity. Research will examine in particular the links between population mobility, agriculture, climate change, ...

  19. Environmental TEM in Materials Research

    DEFF Research Database (Denmark)

    Hansen, Thomas Willum; Wagner, Jakob Birkedal

    Over the last decades, electron microscopy has played a large role in materials research. The increasing use of particularly environmental transmission electron microscopy (ETEM) in materials science provides new possibilities for investigating nanoscale components at work. Careful experimentation....... Imaging samples with a simple geometry, such as gold particles on a flat graphene substrate and analyzing the variations in contrast provides a means for understanding the issues involved with imaging in the presence of a gas. In this work, capabilities, possibilities and challenges of using ETEM...

  20. Environmental TEM for Materials Research

    DEFF Research Database (Denmark)

    Hansen, Thomas Willum

    Over the last decades, electron microscopy has played a large role in materials research. The increasing use of particularly environmental transmission electron microscopy (ETEM) in materials science provides new possibilities for investigating nanoscale components at work. Careful experimentation...... not spatially localized. Imaging samples with a simple geometry, such as gold particles on a flat graphene substrate and analyzing the variations in contrast provides a means for understanding the issues involved with imaging in the presence of a gas.In this work, capabilities, possibilities and challenges...

  1. Experimental Investigation of Ice Phase Change Material Heat Exchangers

    Science.gov (United States)

    Leimkuehler, Thomas O.; Stephan, Ryan A.

    2012-01-01

    Phase change materials (PCM) may be useful for spacecraft thermal control systems that involve cyclical heat loads or cyclical thermal environments. Thermal energy can be stored in the PCM during peak heat loads or in adverse thermal environments. The stored thermal energy can then be released later during minimum heat loads or in more favorable thermal environments. This can result in a decreased turndown ratio for the radiator and a reduced system mass. The use of water as a PCM rather than the more traditional paraffin wax has the potential for significant mass reduction since the latent heat of formation of water is approximately 70% greater than that of wax. One of the potential drawbacks of using ice as a PCM is its potential to rupture its container as water expands upon freezing. In order to develop a space qualified ice PCM heat exchanger, failure mechanisms must first be understood. Therefore, a methodical experimental investigation has been undertaken to demonstrate and document specific failure mechanisms due to ice expansion in the PCM. A number of ice PCM heat exchangers were fabricated and tested. Additionally, methods for controlling void location in order to reduce the risk of damage due to ice expansion were investigated. This paper presents an overview of the results of this investigation from the past three years.

  2. Materials Research Department annual report 2000

    DEFF Research Database (Denmark)

    2001-01-01

    Selected activities of the Materials Research Department at Risø National Laboratory during 2000 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given ofthe Department's industrial collaboration...

  3. Water Based Phase Change Material Heat Exchanger Development

    Science.gov (United States)

    Hansen, Scott W.; Sheth, Ribik B.; Atwell, Matt; Cheek, Ann; Agarwal, Muskan; Hong, Steven; Patel, Aashini,; Nguyen, Lisa; Posada, Luciano

    2014-01-01

    In a cyclical heat load environment such as low Lunar orbit, a spacecraft’s radiators are not sized to reject the full heat load requirement. Traditionally, a supplemental heat rejection device (SHReD) such as an evaporator or sublimator is used to act as a “topper” to meet the additional heat rejection demands. Utilizing a Phase Change Material (PCM) heat exchanger (HX) as a SHReD provides an attractive alternative to evaporators and sublimators as PCM HXs do not use a consumable, thereby leading to reduced launch mass and volume requirements. Studies conducted in this paper investigate utilizing water’s high latent heat of formation as a PCM, as opposed to traditional waxes, and corresponding complications surrounding freezing water in an enclosed volume. Work highlighted in this study is primarily visual and includes understanding ice formation, freeze front propagation, and the solidification process of water/ice. Various test coupons were constructed of copper to emulate the interstitial pin configuration (to aid in conduction) of the proposed water PCM HX design. Construction of a prototypic HX was also completed in which a flexible bladder material and interstitial pin configurations were tested. Additionally, a microgravity flight was conducted where three copper test articles were frozen continuously during microgravity and 2-g periods and individual water droplets were frozen during microgravity.

  4. South Carolina Department of Transportation research peer exchange, November 8-10, 2010.

    Science.gov (United States)

    2010-11-01

    The South Carolina Department of Transportation (SCDOT) hosted a peer exchange of its : research program November 8-10, 2010. The peer exchange was held on the Clemson : University campus in Clemson, SC. The peer exchange team included representative...

  5. Materials Research Department Annual report 1998

    Energy Technology Data Exchange (ETDEWEB)

    Winther, Grethe; Hansen, N. [eds.

    1999-04-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 1998 are described. The scientific work is presented in five chapters: Materials Science, Materials Engineering, Materials Technology, Materials Chemistry and Fusion Materials. A survey is given of the Departments collaboration with national and international industries and research institutions. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists and educational activities are included. (au) 165 refs.

  6. Global Manufacturing Research: Experience Exchange Group (EEG) contributions

    DEFF Research Database (Denmark)

    Bruun, Peter

    1998-01-01

    The intention of this paper is to clarify if and how an ExperienceExchange Group (EEG) can be involved in a research process in the areaof industrial management. For exemplification of the topic an ongoingresearch in global manufacturing is referred to. In this research itwas after a series...... of preliminary studies found interesting to set upan EEG composed of representatives from industry and a researcher. Inthe paper some general research methods pertinent to the areaindustrial management is discussed. The EEG concept is introduced andcharacterised in comparison with the other methods. EEG...... activities aredescribed and a tentative coupling to the phases in a research processis proposed. Following this is a discussion of methodological andquality requirements. It is considered how EEG activities couldpossible contribute to an industrial rooted research. The paper endsup looking at future research...

  7. A Review of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells: Materials and Fabrication Methods

    Directory of Open Access Journals (Sweden)

    Shahram Karimi

    2012-01-01

    Full Text Available The proton exchange membrane fuel cell offers an exceptional potential for a clean, efficient, and reliable power source. The bipolar plate is a key component in this device, as it connects each cell electrically, supplies reactant gases to both anode and cathode, and removes reaction products from the cell. Bipolar plates have been fabricated primarily from high-density graphite, but in recent years, much attention has been paid to developing cost-effective and feasible alternative materials. Two different classes of materials have attracted attention: metals and composites. This paper offers a comprehensive review of the current research being carried out on metallic bipolar plates, covering materials and fabrication methods.

  8. Peer exchange, "strategic goals to manage research programs : building a premier research program".

    Science.gov (United States)

    2013-06-10

    The objectives of the District Department of Transportation (DDOT) Research, Development, & Technology Transfer (RDT) Branch Peer Exchange were: : 1. Receive peer input and perspective on RDT Strategic Plan. : 2. Obtain assistance in assessing validi...

  9. Phase Change Material (PCM) Heat Exchanger Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Project has identified two PCM HX concepts that will be designed, developed and demonstrated on-board the International Space Station (ISS):The first heat exchanger...

  10. Material Exchange Property of Organo Lead Halide Perovskite with Hole-Transporting Materials

    Directory of Open Access Journals (Sweden)

    Seigo Ito

    2015-10-01

    Full Text Available Using X-ray diffraction (XRD, it was confirmed that the deposition of hole-transporting materials (HTM on a CH3NH3PbI3 perovskite layer changed the CH3NH3PbI3 perovskite crystal, which was due to the material exchanging phenomena between the CH3NH3PbI3 perovskite and HTM layers. The solvent for HTM also changed the perovskite crystal. In order to suppress the crystal change, doping by chloride ion, bromide ion and 5-aminovaleric acid was attempted. However, the doping was unable to stabilize the perovskite crystal against HTM deposition. It can be concluded that the CH3NH3PbI3 perovskite crystal is too soft and flexible to stabilize against HTM deposition.

  11. Materials and Waste Management Research

    Science.gov (United States)

    EPA is developing data and tools to reduce waste, manage risks, reuse and conserve natural materials, and optimize energy recovery. Collaboration with states facilitates assessment and utilization of technologies developed by the private sector.

  12. Strategic Research Directions In Microgravity Materials Science

    Science.gov (United States)

    Clinton, Raymond G., Jr.; Wargo, Michael J.; Marzwell, Neville L.; Sanders, Gerald; Schlagheck, Ron; Semmes, Ed; Bassler, Julie; Cook, Beth

    2004-01-01

    The Office of Biological and Physical Research (OBPR) is moving aggressively to align programs, projects, and products with the vision for space exploration. Research in advanced materials is a critical element in meeting exploration goals. Research in low gravity materials science in OBPR is being focused on top priority needs in support of exploration: 1) Space Radiation Shielding; 2) In Situ Resource Utilization; 3) In Situ Fabrication and Repair; 4) Materials Science for Spacecraft and Propulsion Systems; 5) Materials Science for Advanced Life Support Systems. Roles and responsibilities in low gravity materials research for exploration between OBPR and the Office of Exploration Systems are evolving.

  13. Materials Research Department annual report 1999

    DEFF Research Database (Denmark)

    Sørensen, Bent F.; Hansen, Niels

    2000-01-01

    Selected activities of the Materials Research Department at Risø National Laboratory during 1999 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given ofthe Department's participation in collaboration...

  14. Combined research effort on aggregate road materials

    Science.gov (United States)

    Kuznetsova, Elena; Hoff, Inge; Willy Danielsen, Svein; Wigum, Børge Johannes; Fladvad, Marit; Rieksts, Karlis; Loranger, Benoit; Barbieri, Diego

    2017-04-01

    In European countries, the average aggregate consumption per capita is 5 tons per year (European Aggregates Association 2016), while the corresponding number in Norway is 11 tons (Neeb 2015). Due to the increased demand for sand and gravel for construction purposes, e.g. in road construction, the last decade has seen a significant trend towards the use of crushed rock aggregates. Neeb (2015) reports that half of the Norwegian aggregate production (sand, gravel and crushed rock) is used for road construction, and 33 % of the overall sold tonnage of crushed rock is exported. This resource has been more and more preferred over sand and gravel due to the significant technological development of its process and utilization phase. In Norway, the development and implementation of crushed aggregate technology has been the main approach to solve natural resource scarcity (Danielsen and Kuznetsova 2015). In order to reduce aggregates transportation, it is aimed to use local aggregates and aggregates processed from rock excavations, tunneling, road cuts, etc. One issue focused in this research is the influence from blasting and processing on the final quality of the crushed aggregates, specifically relating to the properties for road construction purposes. It is therefor crucial to plan utilization of available materials for use in different road layers following the same production line. New developments and improved availability of mobile crushing and screening equipment could produce more sustainable and profitable sources of good quality aggregate materials from small volume deposits in proximity to construction sites. One of the biggest challenges today to use these materials is that the pavement design manual sets rigid requirements for pavement layers. Four research projects are being conducted in Norway to improve the use of local materials for road construction. Four aspects are to be covered by the research: a) geological characteristics of the materials, their b

  15. Fire-Resistant Materials: Research Overview

    Science.gov (United States)

    1996-12-01

    This report provides an overview of the research being conducted by the Federal Aviation Administration (FAA) to develop fire safe cabin materials for commercial aircraft. The objective of the Fire-Resistant Materials program is to eliminate burning ...

  16. Materials irradiation research in neutron science

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-11-01

    Materials irradiation researches are planned in Neutron Science Research Program. A materials irradiation facility has been conceived as one of facilities in the concept of Neutron Science Research Center at JAERI. The neutron irradiation field of the facility is characterized by high flux of spallation neutrons with very wide energy range up to several hundred MeV, good accessibility to the irradiation field, good controllability of irradiation conditions, etc. Extensive use of such a materials irradiation facility is expected for fundamental materials irradiation researches and R and D of nuclear energy systems such as accelerator-driven incineration plant for long-lifetime nuclear waste. In this paper, outline concept of the materials irradiation facility, characteristics of the irradiation field, preliminary technical evaluation of target to generate spallation neutrons, and materials researches expected for Neutron Science Research program are described. (author)

  17. Materials Research Department annual report 1997

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, B.F.; Hansen, N. [eds.

    1998-04-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 1997 are described. The scientific work is presented in four chapters: Materials Science, Materials Chemistry, Materials Engineering and Materials Technology. A survey is given of the Department`s participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au) 278 refs.

  18. [Research and development of artificial retina material].

    Science.gov (United States)

    Hu, Ning; Yang, Jun; Peng, Chenglin; Wang, Xing; Zhang, Sijie; Zhang, Ying; Zheng, Erxin

    2008-04-01

    The application of artificial retina was introduced. The principal characteristics of artificial retina material were reviewed in particular. Moreover, the recent research development and application prospect were discussed.

  19. Hydrogen adsorption over Zeolite-like MOF materials modified by ion exchange

    Energy Technology Data Exchange (ETDEWEB)

    Calleja, G.; Botas, J.A.; Orcajo, M.G. [Department of Chemical and Energy Technology, ESCET, Universidad Rey Juan Carlos, C/Tulipan s/n, 28933 Mostoles, Madrid (Spain); Sanchez-Sanchez, M. [Instituto de Catalisis y Petroleoquimica, CSIC, C/Marie Curie 2, 28049 Madrid (Spain)

    2010-09-15

    Novel porous Zeolite-like metal-organic framework (ZMOF) materials with Rho and Sod topologies are promising adsorbents for hydrogen storage due to their high surface area and, more importantly, to their capacity of being ion-exchanged, potentially changing their affinity for hydrogen. In this work, we have successfully synthesized both Rho and SodZMOF materials, optimizing experimental conditions for scaling-up the procedure already published to produce grams of material. The resultant materials were alkaline-cation-exchanged, widely characterized and finally tested as hydrogen adsorbents. RhoZMOF is converted into an amorphous phase during some of the ion-exchange processes, whereas SodZMOF, whose ion-exchange capacity has not been investigated so far, always maintains its topology for any tested exchange cation and conditions. Additionally, thermogravimetric analyses and thermal treatments followed by in-situ powder X-ray diffraction analysis have evidenced a significantly higher thermal stability of both as-prepared and ion-exchanged SodZMOF materials in comparison to their Rho-structured homologues. Moreover, the thermal stability of the cation-exchanged ZMOF samples improves when methanol is the ion-exchange solvent rather than the reported ethanol-water mixture. Nitrogen and hydrogen adsorption isotherms at 77 K suggested that alkali-exchanged materials have lower affinity for hydrogen than the as-prepared samples compensated by imidazolium ion; however, due to the smaller size of Na{sup +} or Li{sup +} cations, their lower affinity is easily compensated by the inherent increase in surface area and pore volume as exchange degree increases. (author)

  20. Advanced Materials for Exploration Task Research Results

    Science.gov (United States)

    Cook, M. B. (Compiler); Murphy, K. L.; Schneider, T.

    2008-01-01

    The Advanced Materials for Exploration (AME) Activity in Marshall Space Flight Center s (MSFC s) Exploration Science and Technology Directorate coordinated activities from 2001 to 2006 to support in-space propulsion technologies for future missions. Working together, materials scientists and mission planners identified materials shortfalls that are limiting the performance of long-term missions. The goal of the AME project was to deliver improved materials in targeted areas to meet technology development milestones of NASA s exploration-dedicated activities. Materials research tasks were targeted in five areas: (1) Thermal management materials, (2) propulsion materials, (3) materials characterization, (4) vehicle health monitoring materials, and (5) structural materials. Selected tasks were scheduled for completion such that these new materials could be incorporated into customer development plans.

  1. ION EXCHANGE PROCESS FOR THE RECOVERY AND PURIFICATION OF MATERIALS

    Science.gov (United States)

    Long, R.S.; Bailes, R.H.

    1958-04-15

    A process for the recovery of certain metallic ions from aqueous solutions by ion exchange techniques is described. It is applicable to elements such as vanadium, chromium, nnanganese, and the like, which are capable of forming lower valent cations soluble in aqueous solutions and which also form ldgher valent anions soluble in aqueous acidic solutions. For example, small amounts of vanadium occurring in phosphoric acid prepared from phosphate rock may be recovered by reducing the vanadium to a trivalent cation adsorbing; the vanadium in a cationic exchange resin, then treating the resin with a suitable oxidizing agent to convert the adsorbed vanadium to a higher valent state, and finally eluting; the vanadium as an anion from the resin by means of an aqueous acidic solution.

  2. Analytical Ultrasonics in Materials Research and Testing

    Science.gov (United States)

    Vary, A.

    1986-01-01

    Research results in analytical ultrasonics for characterizing structural materials from metals and ceramics to composites are presented. General topics covered by the conference included: status and advances in analytical ultrasonics for characterizing material microstructures and mechanical properties; status and prospects for ultrasonic measurements of microdamage, degradation, and underlying morphological factors; status and problems in precision measurements of frequency-dependent velocity and attenuation for materials analysis; procedures and requirements for automated, digital signal acquisition, processing, analysis, and interpretation; incentives for analytical ultrasonics in materials research and materials processing, testing, and inspection; and examples of progress in ultrasonics for interrelating microstructure, mechanical properites, and dynamic response.

  3. Proton Exchange Membrane fuel cell development with lightweight component materials, phase 1

    Science.gov (United States)

    Abens, Sandors

    1995-07-01

    Although the Proton Exchange Membrane (PEM) fuel cell is a leading candidate for an automobile power source through meeting the zero emission requirement, its power density is currently an order of magnitude below the 400 W/kg criterion proposed by the Department of Energy. The major contributors to stack weight are the bipolar gas distribution plates. This effort, performed jointly by Energy Research Corporation (ERC) and Texas A&M University (TAM U), focused on lightweight alternative bipolar plate materials and designs. The electronic conductivity of various candidate materials was evaluated. The emphasis was on conductive plastic materials and porous graphite. Several plastic materials with specific resistance between 0.5 and 0.8 ohm/cm were identified. Preliminary evaluation of lightweight materials was performed in single cell tests. The emphasis was on atmospheric pressure and internally humidified cell operation as a potential means of system simplification and reduction of PEM fuel cell ancillary equipment complexity and weight. The performance of single cells was nearly the same at 1 and 3 atm pressure. At a cell potential of O.6V, a current density of 230 mA/sq cm was reached at 1.7 stoichiometric air flow rate. With lightweight bipolar plates, the DOE power density target may be achieved with unpressurized, internally humidified cell stacks.

  4. Analysis of Research Data Management Instruction Materials

    OpenAIRE

    Dressel, Willow

    2015-01-01

    Poster given at the 2015 SLA - All Sciences Poster Session. Many academic libraries are developing research data management instruction programs including online guides and workshops. A wealth of materials are available to draw from. However, the quantity and variety can be overwhelming to someone just starting out. This poster examines and compares 17 publicly available research data management instruction materials.

  5. A Liquid-Liquid Thermoelectric Heat Exchanger as a Heat Pump for Testing Phase Change Material Heat Exchangers

    Science.gov (United States)

    Sheth, Rubik B.; Makinen, Janice; Le, Hung V.

    2016-01-01

    The primary objective of the Phase Change HX payload on the International Space Station (ISS) is to test and demonstrate the viability and performance of Phase Change Material Heat Exchangers (PCM HX). The system was required to pump a working fluid through a PCM HX to promote the phase change material to freeze and thaw as expected on Orion's Multipurpose Crew Vehicle. Due to limitations on ISS's Internal Thermal Control System, a heat pump was needed on the Phase Change HX payload to help with reducing the working fluid's temperature to below 0degC (32degF). This paper will review the design and development of a TEC based liquid-liquid heat exchanger as a way to vary to fluid temperature for the freeze and thaw phase of the PCM HX. Specifically, the paper will review the design of custom coldplates and sizing for the required heat removal of the HX.

  6. Commissioning a materials research laboratory

    Energy Technology Data Exchange (ETDEWEB)

    SAVAGE,GERALD A.

    2000-03-28

    This presentation covers the process of commissioning a new 150,000 sq. ft. research facility at Sandia National Laboratories. The laboratory being constructed is a showcase of modern design methods being built at a construction cost of less than $180 per sq. ft. This is possible in part because of the total commissioning activities that are being utilized for this project. The laboratory's unique approach to commissioning will be presented in this paper. The process will be followed through from the conceptual stage on into the actual construction portion of the laboratory. Lessons learned and cost effectiveness will be presented in a manner that will be usable for others making commissioning related decisions. Commissioning activities at every stage of the design will be presented along with the attributed benefits. Attendees will hear answers to the what, when, who, and why questions associated with commissioning of this exciting project.

  7. Materials Research Department annual report 2000

    Energy Technology Data Exchange (ETDEWEB)

    Winther, G.; Hansen, N. [eds.

    2001-03-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 2000 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's industrial collaboration, educational activities and academic activities, such as collaboration with other research institutions, committee work and a list of publications. Furthermore, the main figures outlining the funding and expenditures of the Department are given. Lists of staff members and visiting scientists are included. (au)

  8. Materials Research Department annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, B.F.; Hansen, N. [eds.

    2000-04-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 1999 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in collaboration with national and international industries and research institutions and of its actitivities within education and training. Furthermore, the main figures outlining the funding and expenditures of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au)

  9. Material Studies Related to the Use of NaK Heat Exchangers Coupled to Stirling Heater Heads

    Science.gov (United States)

    Locci, Ivan E.; Bowman, Cheryl L.; Geng, Steven M.; Robbie, Malcolm G.

    2011-01-01

    NASA has been supporting design studies and technology development that could provide power to an outpost on the Moon, Mars, or an asteroid. Technology development efforts have included fabrication and evaluation of components used in a Stirling engine power conversion system. Destructive material evaluation was performed on a NaK shell heat exchanger that was developed by the NASA Glenn Research Center (GRC) and integrated with a commercial 1 kWe Stirling convertor from Sunpower Incorporated. The NaK Stirling test demonstrated Stirling convertor electrical power generation using a pumped liquid metal heat source under thermal conditions that represent the heat exchanger liquid metal loop in a Fission Power Systems (FPS) reactor. The convertors were operated for a total test time of 66 hr at a maximum temperature of 823 K. After the test was completed and NaK removed, the heat exchanger assembly was sectioned to evaluate any material interactions with the flowing liquid metal. Several dissimilar-metal braze joint options, crucial for the heat exchanger transfer path, were also investigated. A comprehensive investigation was completed and lessons learned for future heat exchanger development efforts are discussed.

  10. Implications of Leader-Member Exchange Theory and Research for Human Resource Development Research.

    Science.gov (United States)

    Burns, Janet Z.; Otte, Fred L.

    1999-01-01

    Leader/member exchange theory is proposed as an alternate approach to the study of organizational leadership. Recent research supports the theory but additional development work is needed. The theory seeks to explain how leader/member relationships develop and the behavioral components of leadership relations. Contains 74 references. (Author/JOW)

  11. Multifunctional Materials and Structures Gordon Research Conference

    Science.gov (United States)

    2016-03-08

    Taylor (Oxford University, United Kingdom) "Dynamic Reconfigurations of Bird Wing During Adaptive Gliding Flight" 9:05 pm - 9:25 pm Discussion 9:25...Operational Summary The Gordon Research Conference (GRC) on Multifunctional Materials & Structures was held at the Four Points Sheraton in...Multifunctional Materials and Structures aimed to extend and accelerate interdisciplinary research activities in this emerging field, which incorporates

  12. MSRR Rack Materials Science Research Rack

    Science.gov (United States)

    Reagan, Shawn

    2017-01-01

    The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and the European Space Agency (ESA) for materials science investigations on the International Space Station (ISS). The MSRR is managed at the Marshall Space Flight Center (MSFC) in Huntsville, AL. The MSRR facility subsystems were manufactured by Teledyne Brown Engineering (TBE) and integrated with the ESA/EADS-Astrium developed Materials Science Laboratory (MSL) at the MSFC Space Station Integration and Test Facility (SSITF) as part of the Systems Development Operations Support (SDOS) contract. MSRR was launched on STS-128 in August 2009, and is currently installed in the U. S. Destiny Laboratory Module on the ISS. Materials science is an integral part of developing new, safer, stronger, more durable materials for use throughout everyday life. The goal of studying materials processing in space is to develop a better understanding of the chemical and physical mechanisms involved, and how they differ in the microgravity environment of space. To that end, the MSRR accommodates advanced investigations in the microgravity environment of the ISS for basic materials science research in areas such as solidification of metals and alloys. MSRR allows for the study of a variety of materials including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. Currently the NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA developed Materials

  13. Advanced Technique and the Results of a Research of a Heat-Mass-Exchange Processes in Clothes Packages in the Subnormal Climate

    Science.gov (United States)

    Rodicheva, M. V.; Abramov, A. V.; Kanatnikov, N. V.; Kanatnikova, P. A.

    2017-05-01

    Quality of clothes in the conditions of subnormal temperatures can be provided by using a scientifically based approach for completing of a set of materials. In the article, the method of a research of heat-mass-exchange in the conditions of a non-stationary heat-mass-exchange is stated; the results of a research of influence of materials on the efficiency of heat-protective clothes are considered.

  14. Research of characteristics slot-hole heat exchanger with the developed surface of heat exchange

    Directory of Open Access Journals (Sweden)

    Malkin E. C.

    2010-03-01

    Full Text Available Thermal characteristics of multichannel slot-hole heat exchanger with the developed surface of heat exchange inside the opened-cycle water cooling system are experimentally investigated. Graphic dependences of average value of temperature of the simulator of a heat current and temperatures of the heat exchanger base are presented on tapped-off power. Dependences of tapped-off power and hydraulic losses on the of water consumption are given. It is shown, that use of developed slot-hole heat exchanger provides higher values of tapped-off power as compared to well-known two-channel slot-hole heat exchanger: at the temperature of heat-generating component simulator of +60°С the tapped-off power increases with 307 up to 750 W. Recommendations on increase of adaptability of slot-hole heat exchanger manufacturing are given. Heat exchanger is suitable for application in microprocessors and others heat-generating components and electronic equipment units cooling.

  15. PREFACE: 6th EEIGM International Conference on Advanced Materials Research

    Science.gov (United States)

    Horwat, David; Ayadi, Zoubir; Jamart, Brigitte

    2012-02-01

    The 6th EEIGM Conference on Advanced Materials Research (AMR 2011) was held at the European School of Materials Engineering (EEIGM) on the 7-8 November 2011 in Nancy, France. This biennial conference organized by the EEIGM is a wonderful opportunity for all scientists involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE), to present their research in the various fields of Materials Science and Engineering. This conference is also open to other universities who have strong links with the EEIGM and provides a forum for the exchange of ideas, co-operation and future orientations by means of regular presentations, posters and a round-table discussion. This edition of the conference included a round-table discussion on composite materials within the Interreg IVA project '+Composite'. Following the publication of the proceedings of AMR 2009 in Volume 5 of this journal, it is with great pleasure that we present this selection of articles to the readers of IOP Conference Series: Materials Science and Engineering. Once again it represents the interdisciplinary nature of Materials Science and Engineering, covering basic and applicative research on organic and composite materials, metallic materials and ceramics, and characterization methods. The editors are indebted to all the reviewers for reviewing the papers at very short notice. Special thanks are offered to the sponsors of the conference including EEIGM-Université de Lorraine, AMASE, DocMASE, Grand Nancy, Ville de Nancy, Region Lorraine, Fédération Jacques Villermaux, Conseil Général de Meurthe et Moselle, Casden and '+Composite'. Zoubir Ayadi, David Horwat and Brigitte Jamart

  16. Use and Misuse of Material Transfer Agreements: Lessons in Proportionality from Research, Repositories, and Litigation

    OpenAIRE

    Bubela, Tania; Guebert, Jenilee; Mishra, Amrita

    2015-01-01

    Material transfer agreements exist to facilitate the exchange of materials and associated data between researchers as well as to protect the interests of the researchers and their institutions. But this dual mandate can be a source of frustration for researchers, creating administrative burdens and slowing down collaborations. We argue here that in most cases in pre-competitive research, a simple agreement would suffice; the more complex agreements and mechanisms for their negotiation should ...

  17. The future research of material science

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, Hironobu [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan)

    1997-11-01

    High Energy Accelerator Research Organization (KEK), which was established on 1 April, consists of two institutes. One of these is Institute of Materials Structure Science. New research program in the new institute using synchrotron radiation, neutrons and muons are discussed. (author)

  18. Materials research institute annual report FY98

    Energy Technology Data Exchange (ETDEWEB)

    Radousky, H

    1999-11-02

    The Materials Research Institute (MRI) is the newest of the University/LLNL Institutes and began operating in March 1997. The MRI is one of five Institutes reporting to the LLNL University Relations Program (URP), all of which have as their primary goal to facilitate university interactions at LLNL. This report covers the period from the opening of the MRI through the end of FY98 (September 30, 1998). The purpose of this report is to emphasize both the science that has been accomplished, as well as the LLNL and university people who were involved. The MRI is concentrating on projects, which highlight and utilize the Laboratory's unique facilities and expertise. Our goal is to enable the best university research to enhance Laboratory programs in the area of cutting-edge materials science. The MRI is focusing on three primary areas of materials research: Biomaterials (organic/inorganic interfaces, biomemetic processes, materials with improved biological response, DNA materials science); Electro/Optical Materials (laser materials and nonlinear optical materials, semiconductor devices, nanostructured materials); and Metals/Organics (equation of state of metals, synthesis of unique materials, high explosives/polymers). In particular we are supporting projects that will enable the MRI to begin to make a distinctive name for itself within the scientific community and will develop techniques applicable to LLNL's core mission. This report is organized along the lines of these three topic areas. A fundamental goal of the MRI is to nucleate discussion and interaction between Lab and university researchers, and among Lab researchers from different LLNL Directorates. This is accomplished through our weekly seminar series, special seminar series such as Biomaterials and Applications of High Pressure Science, conferences and workshops, our extensive visitors program and MRI lunches. We are especially pleased to have housed five graduate students who are performing their

  19. Chemistry and materials science research report

    Energy Technology Data Exchange (ETDEWEB)

    1990-05-31

    The research reported here in summary form was conducted under the auspices of Weapons-Supporting Research (WSR) and Institutional Research and Development (IR D). The period covered is the first half of FY90. The results reported here are for work in progress; thus, they may be preliminary, fragmentary, or incomplete. Research in the following areas are briefly described: energetic materials, tritium, high-Tc superconductors, interfaces, adhesion, bonding, fundamental aspects of metal processing, plutonium, synchrotron-radiation-based materials science, photocatalysis on doped aerogels, laser-induced chemistry, laser-produced molecular plasmas, chemistry of defects, dta equipment development, electronic structure study of the thermodynamic and mechanical properties of Al-Li Alloys, and the structure-property link in sub-nanometer materials.

  20. Research on Heat Exchange Process in Aircraft Air Conditioning System

    Science.gov (United States)

    Chichindaev, A. V.

    2017-11-01

    Using of heat-exchanger-condenser in the air conditioning system of the airplane Tu-204 (Boeing, Airbus, Superjet 100, MS-21, etc.) for cooling the compressed air by the cold air with negative temperature exiting the turbine results in a number of operational problems. Mainly it’s frosting of the heat exchange surface, which is the cause of live-section channels frosting, resistance increasing and airflow in the system decreasing. The purpose of this work is to analyse the known freeze-up-fighting methods for heat-exchanger-condenser, description of the features of anti-icing protection and offering solutions to this problem. For the problem of optimizing the design of heat exchangers in this work used generalized criterion that describes the ratio of thermal resistances of cold and hot sections, which include: the ratio of the initial values of heat transfer agents flow state; heat exchange surface finning coefficients; factors which describes the ratio of operating parameters and finning area. By controlling the ratio of the thermal resistances can be obtained the desired temperature of the heat exchange surface, which would prevent freezing. The work presents the results of a numerical study of the effect of different combinations of regime and geometrical factors changes on reduction of the heat-exchanger-condenser freezing surface area, including using of variable ratio of thermal resistances.

  1. Creating a data exchange strategy for radiotherapy research: Towards federated databases and anonymised public datasets

    NARCIS (Netherlands)

    Skripcak, T.; Belka, C.; Bosch, W.; Brink, C. Van den; Brunner, T.; Budach, V.; Büttner, D.; Debus, J.; Dekker, A.; Grau, C.; Gulliford, S.; Hurkmans, C.; Just, U.; Krause, M.; Lambin, P.; Langendijk, J.A.; Lewensohn, R.; Luhr, A.; Maingon, P.; Masucci, M.; Niyazi, M.; Poortmans, P.M.P.; Simon, M.; Schmidberger, H.; Spezi, E.; Stuschke, M.; Valentini, V.; Verheij, M.; Whitfield, G.; Zackrisson, B.; Zips, D.; Baumann, M.

    2014-01-01

    Disconnected cancer research data management and lack of information exchange about planned and ongoing research are complicating the utilisation of internationally collected medical information for improving cancer patient care. Rapidly collecting/pooling data can accelerate translational research

  2. Creating a data exchange strategy for radiotherapy research : Towards federated databases and anonymised public datasets

    NARCIS (Netherlands)

    Skripcak, Tomas; Belka, Claus; Bosch, Walter; Brink, Carsten; Brunner, Thomas; Budach, Volker; Buettner, Daniel; Debus, Juergen; Dekker, Andre; Grau, Cai; Gulliford, Sarah; Hurkmans, Coen; Just, Uwe; Krause, Mechthild; Lambin, Philippe; Langendijk, Johannes A.; Lewensohn, Rolf; Luehr, Armin; Maingon, Philippe; Masucci, Michele; Niyazi, Maximilian; Poortmans, Philip; Simon, Monique; Schmidberger, Heinz; Spezi, Emiliano; Stuschke, Martin; Valentini, Vincenzo; Verheij, Marcel; Whitfield, Gillian; Zackrisson, Bjoern; Zips, Daniel; Baumann, Michael

    2014-01-01

    Disconnected cancer research data management and lack of information exchange about planned and ongoing research are complicating the utilisation of internationally collected medical information for improving cancer patient care. Rapidly collecting/pooling data can accelerate 'translational research

  3. New developments in photon and materials research

    CERN Document Server

    2013-01-01

    This book presents the most recent updates in the field of photon and optical materials research. It is devoted to various interdisciplinary subjects such as fundamental photon physics, bio and medical photon physics, ultrafast non-linear optics, quasiparticle excitation and spectroscopy, coherent mid-infrared (IR) light sources, functional optoelectronic materials and optical fibres, and quantum nano-structured devices for various important technological applications. It contains 19 authoritative peer-reviewed chapters regarding experimental and theoretical research in these fields, contributed by young scientists and engineers (assistant or associate professor level) along with well-established experts. The response of materials to electromagnetic fields, namely light-matter interaction, has been of special concern in fundamental optical sciences. The ability to fabricate and/or engineer new materials and structures is giving rise to revolutionary changes in the field, which also includes soft condensed mat...

  4. Overview of materials research in South Africa

    CSIR Research Space (South Africa)

    Du Preez, W

    2011-09-01

    Full Text Available Sector Initiatives for Growth and Impact Aerospace Automotive Health Energy Micro-manufacturingBuildings Materials Science & Manufacturing ? CSIR 2010 Slide 4 www.csir.co.za Overview of Materials Research in South Africa Dr Willie du Preez Manager...&D Facilities: CSIR, UCT, UP, US, NMMU, CUT, NLC, Mintek, Necsa Physical Metallurgy: UCT, UP Primary Metal Production CSIR UP Necsa Mintek Powder Processing CSIR US ULim NIMS Wits, Mintek Investment Casting CSIR UCT US Aerosud Welding...

  5. Research of footwear lining materials thermoconductive properties

    Science.gov (United States)

    Maksudova, U.; Ilkhamova, M.; Mirzayev, N.; Pazilova, D.

    2017-11-01

    Protective properties of footwear are influenced by a number of factors and the most important of them are: design features of the top and the bottom of the footwear, it’s shape, physical and mechanical properties of the components of which they are made. In course of work there were researched thermoconductive properties of different lining membrane materials used for production of high temperature protective footwear. Research results allow to select the appropriate materials by reference to thermoconductive properties during design of protective footwear for extreme conditions to prolong the wearer’s time of comfortable stay in conditions of exposure of elevated temperatures to a stack.

  6. MatDB Online - A Standards-Based System for Preserving, Managing, and Exchanging Engineering Materials Test Data

    Directory of Open Access Journals (Sweden)

    TSP Austin

    2012-11-01

    Full Text Available With ICT Standards playing a key role in support of research and development in many disciplines, the European Commission Institute for Energy and Transport is keen to promote the development and adoption of ICT Standards for engineering data. In this respect, its MatDB Online facility is a Standards-based system for preserving, managing, and exchanging engineering materials test data. While MatDB Online has evolved over more than 30 years to incorporate the latest innovations in data preservation and exchange, such as XML-based data transfer and data citation using digital object identifiers, it continues to rely on a robust data model developed more than 30 years ago through the joint efforts of the National Research Institute for Metals (the predecessor to NIMS, the National Institute for Materials Science, the European Commission Joint Research Centre, and the National Institute of Standards and Technology. While this data model has endured over many years, there is no corresponding Standard. Similarly, related efforts by the engineering materials community to deliver a Standard representation for engineering materials, such as MatML, have failed to be ratified. In consequence of the continued absence of a Standard representation for engineering materials data, there is no common mechanism for preserving and exchanging materials data and no formal means of maintaining a data model to support advances in materials technology, such as the emergence of nanomaterials. It is for these reasons that the European Commission Institute for Energy and Transport is supporting SERES, a CEN Workshop on Standards for Electronic Reporting in the Engineering Sector. As one of more than thirty organisations supporting the SERES Workshop, the Institute for Energy and Transport will make the MatDB XML schema available as one of several resources that will be taken into consideration when the prenormative Standard for representing engineering materials data is

  7. Experimental findings on actinide recovery utilizing oxidation by peroxydisulfate followed by ion exchange: Fuel cycle research & development

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, D. T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Shehee, T. C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-08-31

    Our research seeks to determine if inorganic ion-exchange materials can be exploited to provide effective minor actinide (Am, Cm) separation from lanthanides. Previous work has established that a number of inorganic and UMOF ion-exchange materials exhibit varying affinities for actinides and lanthanides, which may be exploited for effective separations. During FY15, experimental work focused on investigating methods to oxidize americium in dilute nitric and perchloric acid with subsequent ion-exchange performance measurements of ion exchangers with the oxidized americium in dilute nitric acid. Ion-exchange materials tested included a variety of alkali titanates. Americium oxidation testing sought to determine the influence that other redox active components may have on the oxidation of AmIII. Experimental findings indicated that CeIII, NpV, and RuII are oxidized by peroxydisulfate, but there are no indications that the presence of CeIII, NpV, and RuII affected the rate or extent of americium oxidation at the concentrations of peroxydisulfate being used.

  8. Materials Research Department annual report 2002

    DEFF Research Database (Denmark)

    2003-01-01

    Selected activities of the Materials Research Department at Risø National Laboratory during 2002 are described. The scientific work is described in five chapters and a survey is given of the Department’s educational activities along with a list ofpublished work, patents, prizes, organized meetings...

  9. Materials Research Department annual report 2001

    DEFF Research Database (Denmark)

    Carstensen, Jesper Vejlø; Lindgård, Per-Anker; Feidenhans'l, Robert Krarup

    2002-01-01

    Selected activities of the Materials Research Department at Risø National Laboratory during 2001 are described. The scientific work is described in 10 chapters and a survey is given of the Department's educational activities along with a list ofpublished work. Furthermore, the main figures...

  10. Materials Research Department annual report 2003

    DEFF Research Database (Denmark)

    2004-01-01

    Selected activities of the Materials Research Department at Risø National Laboratory during 2003 are described. The scientific work is described in five chapters and a survey is given of the Department’s educational activities along with a list ofpublished work, prizes, organized meetings...

  11. First Materials Science Research Facility Rack Capabilities and Design Features

    Science.gov (United States)

    Cobb, S.; Higgins, D.; Kitchens, L.; Curreri, Peter (Technical Monitor)

    2002-01-01

    The first Materials Science Research Rack (MSRR-1) is the primary facility for U.S. sponsored materials science research on the International Space Station. MSRR-1 is contained in an International Standard Payload Rack (ISPR) equipped with the Active Rack Isolation System (ARIS) for the best possible microgravity environment. MSRR-1 will accommodate dual Experiment Modules and provide simultaneous on-orbit processing operations capability. The first Experiment Module for the MSRR-1, the Materials Science Laboratory (MSL), is an international cooperative activity between NASA's Marshall Space Flight Center (MSFC) and the European Space Agency's (ESA) European Space Research and Technology Center (ESTEC). The MSL Experiment Module will accommodate several on-orbit exchangeable experiment-specific Module Inserts which provide distinct thermal processing capabilities. Module Inserts currently planned for the MSL are a Quench Module Insert, Low Gradient Furnace, and a Solidification with Quench Furnace. The second Experiment Module for the MSRR-1 configuration is a commercial device supplied by MSFC's Space Products Development (SPD) Group. Transparent furnace assemblies include capabilities for vapor transport processes and annealing of glass fiber preforms. This Experiment Module is replaceable on-orbit. This paper will describe facility capabilities, schedule to flight and research opportunities.

  12. High temperature corrosion of advanced ceramic materials for hot gas filters and heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Crossland, C.E.; Shelleman, D.L.; Spear, K.E. [Pennsylvania State Univ., University Park, PA (United States)] [and others

    1996-08-01

    A vertical flow-through furnace has been built to study the effect of corrosion on the morphology and mechanical properties of ceramic hot gas filters. Sections of 3M Type 203 and DuPont Lanxide SiC-SiC filter tubes were sealed at one end and suspended in the furnace while being subjected to a simulated coal combustion environment at 870{degrees}C. X-ray diffraction and electron microscopy is used to identify phase and morphology changes due to corrosion while burst testing determines the loss of mechanical strength after exposure to the combustion gases. Additionally, a thermodynamic database of gaseous silicon compounds is currently being established so that calculations can be made to predict important products of the reaction of the environment with the ceramics. These thermodynamic calculations provide useful information concerning the regimes where the ceramic may be degraded by material vaporization. To verify the durability and predict lifetime performance of ceramic heat exchangers in coal combustion environments, long-term exposure testing of stressed (internally pressurized) tubes must be performed in actual coal combustion environments. The authors have designed a system that will internally pressurize 2 inch OD by 48 inch long ceramic heat exchanger tubes to a maximum pressure of 200 psi while exposing the outer surface of the tubes to coal combustion gas at the Combustion and Environmental Research Facility (CERF) at the Pittsburgh Energy and Technology Center. Water-cooled, internal o-ring pressure seals were designed to accommodate the existing 6 inch by 6 inch access panels of the CERF. Tubes will be exposed for up to a maximum of 500 hours at temperatures of 2500 and 2600{degrees}F with an internal pressure of 200 psi. If the tubes survive, their retained strength will be measured using the high temperature tube burst test facility at Penn State University. Fractographic analysis will be performed to identify the failure source(s) for the tubes.

  13. Overview of NASA's Microgravity Materials Research Program

    Science.gov (United States)

    Downey, James Patton; Grugel, Richard

    2012-01-01

    The NASA microgravity materials program is dedicated to conducting microgravity experiments and related modeling efforts that will help us understand the processes associated with the formation of materials. This knowledge will help improve ground based industrial production of such materials. The currently funded investigations include research on the distribution of dopants and formation of defects in semiconductors, transitions between columnar and dendritic grain morphology, coarsening of phase boundaries, competition between thermally and kinetically favored phases, and the formation of glassy vs. crystalline material. NASA microgravity materials science investigators are selected for funding either through a proposal in response to a NASA Research Announcement or by participation in a team proposing to a foreign agency research announcement. In the latter case, a US investigator participating in a successful proposal to a foreign agency can then apply to NASA for funding of an unsolicited proposal. The program relies on cooperation with other aerospace partners from around the world. The ISS facilities used for these investigations are provided primarily by partnering with foreign agencies and in most cases the US investigators are working as a part of a larger team studying a specific area of materials science. The following facilities are to be utilized for the initial investigations. The ESA provided Low Gradient Facility and the Solidification and Quench Inserts to the Materials Research Rack/Materials Science Laboratory are to be used primarily for creating bulk samples that are directionally solidified or quenched from a high temperature melt. The CNES provided DECLIC facility is used to observe morphological development in transparent materials. The ESA provided Electro-Magnetic Levitator (EML) is designed to levitate, melt and then cool samples in order to study nucleation behavior. The facility provides conditions in which nucleation of the solid is

  14. Staff exchange with Spokane Intercollegiate Research and Technology Institute (SIRTI), final project report

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, G.M.

    1994-12-01

    Staff exchanges, such as the one described in this report, are intended to facilitate communication and collaboration among scientists and engineers at Department of Energy (DOE) laboratories, in U.S. industry, and academia. Funding support for these exchanges is provided by the DOE, Office of Energy Research, Laboratory Technology Transfer Program. Funding levels for each exchange typically range from $20,000 to $40,000. The exchanges offer the opportunity for the laboratories to transfer technology and expertise to industry, gain a perspective on industry`s problems, and develop the basis for further cooperative efforts through Cooperative Research and Development Agreements (CRADAS) or other mechanisms.

  15. Creating a data exchange strategy for radiotherapy research: Towards federated databases and anonymised public datasets

    DEFF Research Database (Denmark)

    Skripcak, Tomas; Belka, Claus; Bosch, Walter

    2014-01-01

    Disconnected cancer research data management and lack of information exchange about planned and ongoing research are complicating the utilisation of internationally collected medical information for improving cancer patient care. Rapidly collecting/pooling data can accelerate translational resear...

  16. Conceptual study of in-tank cesium removal using an inorganic ion exchange material

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, R.S.; Kurath, D.E.

    1996-04-01

    Presently, the Hanford Site contains approximately 230,000 m{sup 3} of mixed waste stored in 177 underground tanks. Approximately 55,000 m{sup 3} of this waste is sludge, 90,000 m{sup 3} is salt cake, and 80,000 m{sup 3} is supernate. Although the pretreatment and final disposal requirements for the waste have not been entirely defined, it is likely that some supernatant pretreatment will be required to remove {sup 137}Cs and possibly {sup 90}Sr and the transuranic components. The objective of this study was to estimate the number of HLW glass canisters resulting from the use of inorganic ion exchanger materials as in-tank pretreatment technology. The variables in the study were: number of contacts between waste and ion exchange material; ion exchange material; and decontamination requirement. This conceptual study investigates a generic in-tank Cs removal flowsheet using crystalline silico-titanates and IE-96 zeolites, and the impact of each ion exchanger on the number of glass canisters produced. In determining glass formulation, data based on current reference technology was used. Sample calculations from the worksheets and summaries of final calculated results are included at the end of this report.

  17. Materials research by electron momentum spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Canney, S.A.; Fang, Z.; Guo, X.; McCarthy, I.E. [Flinders Univ. of South Australia, Adelaide, SA (Australia). Electronic Structure of Materials Centre; Kheifets, A.S.; Vos, M.; Weigold, E. [Australian National Univ., Canberra, ACT (Australia). Research School of Physical Sciences and Engineering, Atomic and Molecular Physcis Laboratories

    1998-06-01

    Electron momentum spectroscopy (EMS), also known as (e,2e) spectroscopy is a relatively new technique for the research of materials. It directly determines the electronic structure of materials using binary electron-electron collisions. The measured intensity is proportional to the energy-momentum density, i.e. the modulus square of the wave function in momentum space. This intensity is simply the probability of finding an electron in the material with a particular combination of binding-energy and momentum. In contrast to photoemission measurements, EMS is able to resolve real momentum (rather than crystal-momentum) and the measured intensity is easily related to the electronic structure itself. The measured and calculated momentum densities of graphite, aluminium and amorphous silicon films are presented. 7 refs., 3 figs.

  18. The Empirical Research of the Impact of GDP and Exchange Rate on Foreign Exchange Reserve Scale in China-Based on Quantile Regression Model

    OpenAIRE

    Lu Fang-Yuan; Shi Jun-Guo

    2013-01-01

    Based on the relevant data from 1985 to 2010, this thesis uses a quantile regression model to make an empirical research about the effect of GDP and exchange rate on foreign exchange reserve. The findings show that: Both GDP and exchange rate have a remarkable influence on the size of foreign exchange reserve and the effect of exchange rate on foreign exchange reserve is higher than GDP at mean place and middle and lower quantile, smaller than GDP at higher quantile. At all the examined quant...

  19. Comparative research of international exchange of plant products

    Directory of Open Access Journals (Sweden)

    Đorović Milutin T.

    2003-01-01

    Full Text Available The well known events which had taken place in our country over the period 1989-2001 provoked adverse effects on foreign trade exchange of the total economy, agriculture and commodities of plant origin. These effects and changes were analyzed using corresponding indices for the sub periods 1989-1992 and 1998-2001. The foreign trade exchange balance was substantially negative in both sub periods over the analyzed period showing an aggravating trend. Export covering import declined from 78.09% to only 47.71%. The positive balance of exchange of agricultural, especially commodities of plant origin in the first four years was turned into a negative balance of exchange in the second four years. Export covering import at the agricultural level declined from 164.79% to 78.58% and at the level of commodities of plant origin from 201,76% to 87.35%. There was a significant disturbance of commodity and regional structure exchange. The share of agriculture in the total export of the country was raised from 13.82% to 18.16%. The share of plant originating commodities in the total export of agriculture was raised from 71,96% to 86,34%. Basic agricultural products predominated in the export. In addition, in the domestic export the share of developed countries decreased which contributed to poor export results and increased the import dependence of the country. Considering the above said, the need arises to increase substantially agricultural production, i.e. commodities of plant origin. The structure and output of these productions should meet the needs of both domestic and foreign markets. International standards need to be applied in order to take hold of new foreign markets, exporting high technology processed products, using intensive and efficient promotive activities. Subsequently, greater investments and a planned production are needed, liberalization and especially the system of import control in foreign trade exchange of agricultural products, i

  20. 2015 Materials Research Society Spring Meeting

    Science.gov (United States)

    2016-05-12

    ff/ The Materials Research Society restricts the use of member, volunteer and staff contact information, including all email addresses. This applies...GG3.10 Engineering a Quantum Dot Multiplexing Assay for the Development of Enzyme and Nucleic Acid Diagnostics Polina Brangel1, Philip D Howes1...Electronic Engineering, Yonsei University, Seoul, Korea (the Republic of); 2, Department of Biotechnology , Yonsei University, Seoul, Korea (the Republic

  1. Materials Research Department annual report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Bentzen, J.J.; Lindgaerd, P.A.; Feidenhans' l, R. (eds.)

    2004-04-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 2003 are described. The Scientific work is described in five chapters and a survey is given of the Departments educational activities along with a list of published work, prizes, organized meetings, and membership of committees. Furthermore, the main figures outlining the funding and expenditures of the Department are given and a list of staff members is included. (au)

  2. Materials Research Department. Annual Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Cartensen, J.V.; Lindgaard, P.A.; Freidenhans' I, R. (eds.)

    2002-08-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 2001 are described. The scientific work is described in 10 chapters and a survey is given of the Department's educational activities along with a list of published work. Furthermore, the main figures outlining the funding and expenditures of the Department are given and a list of staff members is included. (au)

  3. Design Guideline for Primary Heat Exchanger in a Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sunil; Seo, Kyoung-Woo; Kim, Seong-Hoon; Chi, Dae-Young; Park, Cheol [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In this paper, analytical study is conducted to track the variation of the PCS outlet temperature in conditions of the constant core power and constant SCS inlet temperature. The PCS circulates demineralized water to remove the heat generated in reactor core. The heat is transferred to the cold water of the SCS through the primary heat exchanger. In JRTR, Plate-type Heat Exchanger (PHE) was used as the primary heat exchanger. The cooling tower automatically sets the SCS inlet temperature constant by fan speed control. The flow rate of SCS is adjusted to be identical with the PCS flow rate. To design the PHE, the inlet and outlet temperatures and the flow rates for both systems should be determined. The flow rate has the allowable band for the safe operation from the lower limit to upper limit resulting in different temperature distribution in the PHE. Specially, the PCS outlet temperature which is the core inlet temperature is used for a safety parameter for the reactor shutdown. Therefore, we need to figure out which limit for the flow rate should be used from the conservative point of view. At 200 kg/s of PCS and SCS flow rates, the inlet and outlet temperatures are 41.3℃and 34℃, respectively. With increase of the flow rate, both of PCS inlet and outlet temperatures decrease to 33.6℃ and 39.9℃. This result means the low limit of the allowable flow band should be used for the conservative design of primary heat exchanger. If the upper limit of the allowable flow band is used, the PCS outlet temperature which is the safety parameter used for the reactor shutdown increases with decrease of the flow rate.

  4. High temperature active heat exchanger research for latent heat storage

    Science.gov (United States)

    Alario, J.; Haslett, R.

    1982-02-01

    An active heat exchange method in a latent heat (salt) thermal energy storage system that prevents a low conductivity solid salt layer from forming on heat transfer surfaces was developed. An evaluation of suitable media with melting points in the temperature range of interest (250 to 400 C) limited the candidates to molten salts from the chloride, hydroxide and nitrate families, based on high storage capacity, good corrosion characteristics and availability in large quantities at reasonable cost. The specific salt recommended for laboratory tests was a choride eutectic (20.5KCL o 24.5NaCL o 55.MgCl2% by wt.), with a nominal melting point of 385 C. Various active heat exchange concepts were given a technical and economic comparison to a passive tube shell design for a reference application (300 MW sub t for 6 hours). Test hardware was then built for the most promising concept: a direct contact heat exchanger in which molten salt droplets are injected into a cooler counter flowing stream of liquid metal carrier fluid (lead/Bismuth).

  5. Isotope exchange reactions on ceramic breeder materials and their effect on tritium inventory

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, M.; Baba, A. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Kawamura, Y.; Nishi, M.

    1998-03-01

    Though lithium ceramic materials such as Li{sub 2}O, LiAlO{sub 2}, Li{sub 2}ZrO{sub 3}, Li{sub 2}TiO{sub 3} and Li{sub 4}SiO{sub 4} are considered as breeding materials in the blanket of a D-T fusion reactor, the release behavior of the bred tritium in these solid breeder materials has not been fully understood. The isotope exchange reaction rate between hydrogen isotopes in the purge gas and tritium on the surface of breeding materials have not been quantified yet, although helium gas with hydrogen or deuterium is planned to be used as the blanket purge gas in the recent blanket designs. The mass transfer coefficient representing the isotope exchange reaction between H{sub 2} and D{sub 2}O or that between D{sub 2} and H{sub 2}O in the ceramic breeding materials bed is experimentally obtained in this study. Effects of isotope exchange reactions on the tritium inventory in the bleeding blanket is discussed based on data obtained in this study where effects of diffusion of tritium in the grain, absorption of water in the bulk of grain, and adsorption of water on the surface of grain, together with two types of isotope exchange reactions are considered. The way to estimate the tritium inventory in a Li{sub 2}ZrO{sub 3} blanket used in this study shows a good agreement with data obtained in such in-situ experiments as MOZART, EXOTIC-5, 6 and TRINE experiments. (author)

  6. Correlation between charge transfer and exchange coupling in carbon-based magnetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Anh Tuan, E-mail: tuanna@hus.edu.vn [Faculty of Physics, VNU University of Science, 334 Nguyen Trai, Thanh Xuan, Ha Noi (Viet Nam); Science and Technology Department, Vietnam National University, Hanoi, 144 Xuan Thuy, Cau Giay, Hanoi (Viet Nam); Japan Advanced Institute of Science and Technology, 1-1, Asahidai, Nomi, Ishikawa, 923-1292 Japan (Japan); Nguyen, Van Thanh; Nguyen, Huy Sinh [Faculty of Physics, VNU University of Science, 334 Nguyen Trai, Thanh Xuan, Ha Noi (Viet Nam); Pham, Thi Tuan Anh [Faculty of Physics, VNU University of Science, 334 Nguyen Trai, Thanh Xuan, Ha Noi (Viet Nam); Faculty of Science, College of Hai Duong, Nguyen Thi Due, Hai Duong (Viet Nam); Do, Viet Thang [Faculty of Physics, VNU University of Science, 334 Nguyen Trai, Thanh Xuan, Ha Noi (Viet Nam); Faculty of Science, Haiphong University, 171 Phan Dang Luu, Kien An, Hai Phong (Viet Nam); Dam, Hieu Chi [Japan Advanced Institute of Science and Technology, 1-1, Asahidai, Nomi, Ishikawa, 923-1292 Japan (Japan)

    2015-10-15

    Several forms of carbon-based magnetic materials, i.e. single radicals, radical dimers, and alternating stacks of radicals and diamagnetic molecules, have been investigated using density-functional theory with dispersion correction and full geometry optimization. Our calculated results demonstrate that the C{sub 31}H{sub 15} (R{sub 4}) radical has a spin of ½. However, in its [R{sub 4}]{sub 2} dimer structure, the net spin becomes zero due to antiferromagnetic spin-exchange between radicals. To avoid antiferromagnetic spin-exchange of identical face-to-face radicals, eight alternating stacks, R{sub 4}/D{sub 2m}/R{sub 4} (with m = 3-10), were designed. Our calculated results show that charge transfer (Δn) between R{sub 4} radicals and the diamagnetic molecule D{sub 2m} occurs with a mechanism of spin exchange (J) in stacks. The more electrons that transfer from R{sub 4} to D{sub 2m}, the stronger the ferromagnetic spin-exchange in stacks. In addition, our calculated results show that Δn can be tailored by adjusting the electron affinity (E{sub a}) of D{sub 2m}. The correlation between Δn, E{sub a}, m, and J is discussed. These results give some hints for the design of new ferromagnetic carbon-based materials.

  7. Correlation between charge transfer and exchange coupling in carbon-based magnetic materials

    Directory of Open Access Journals (Sweden)

    Anh Tuan Nguyen

    2015-10-01

    Full Text Available Several forms of carbon-based magnetic materials, i.e. single radicals, radical dimers, and alternating stacks of radicals and diamagnetic molecules, have been investigated using density-functional theory with dispersion correction and full geometry optimization. Our calculated results demonstrate that the C31H15 (R4 radical has a spin of ½. However, in its [R4]2 dimer structure, the net spin becomes zero due to antiferromagnetic spin-exchange between radicals. To avoid antiferromagnetic spin-exchange of identical face-to-face radicals, eight alternating stacks, R4/D2m/R4 (with m = 3-10, were designed. Our calculated results show that charge transfer (Δn between R4 radicals and the diamagnetic molecule D2m occurs with a mechanism of spin exchange (J in stacks. The more electrons that transfer from R4 to D2m, the stronger the ferromagnetic spin-exchange in stacks. In addition, our calculated results show that Δn can be tailored by adjusting the electron affinity (Ea of D2m. The correlation between Δn, Ea, m, and J is discussed. These results give some hints for the design of new ferromagnetic carbon-based materials.

  8. Development of heat exchanger for high temperature energy storage with bulk materials

    Science.gov (United States)

    Boura, Cristiano Teixeira; Niederwestberg, Stefan; McLeod, Jacqueline; Herrmann, Ulf; Hoffschmidt, Bernhard

    2016-05-01

    This paper gives a general overview of the concept of a high temperature gas-to-particle heat exchanger, the corresponding test facilities and the results of laboratory tests. A description of the optimal bulk material and separator properties and their influences on the operating conditions is also given. The three phenomena pinning, blistering and blocking could be observed during the tests and were analysed in more detail using simulation software.

  9. Nuclear radioactive techniques applied to materials research

    CERN Document Server

    Correia, João Guilherme; Wahl, Ulrich

    2011-01-01

    In this paper we review materials characterization techniques using radioactive isotopes at the ISOLDE/CERN facility. At ISOLDE intense beams of chemically clean radioactive isotopes are provided by selective ion-sources and high-resolution isotope separators, which are coupled on-line with particle accelerators. There, new experiments are performed by an increasing number of materials researchers, which use nuclear spectroscopic techniques such as Mössbauer, Perturbed Angular Correlations (PAC), beta-NMR and Emission Channeling with short-lived isotopes not available elsewhere. Additionally, diffusion studies and traditionally non-radioactive techniques as Deep Level Transient Spectroscopy, Hall effect and Photoluminescence measurements are performed on radioactive doped samples, providing in this way the element signature upon correlation of the time dependence of the signal with the isotope transmutation half-life. Current developments, applications and perspectives of using radioactive ion beams and tech...

  10. Use and misuse of material transfer agreements: lessons in proportionality from research, repositories, and litigation.

    Science.gov (United States)

    Bubela, Tania; Guebert, Jenilee; Mishra, Amrita

    2015-02-01

    Material transfer agreements exist to facilitate the exchange of materials and associated data between researchers as well as to protect the interests of the researchers and their institutions. But this dual mandate can be a source of frustration for researchers, creating administrative burdens and slowing down collaborations. We argue here that in most cases in pre-competitive research, a simple agreement would suffice; the more complex agreements and mechanisms for their negotiation should be reserved for cases where the risks posed to the institution and the potential commercial value of the research reagents is high.

  11. Use and misuse of material transfer agreements: lessons in proportionality from research, repositories, and litigation.

    Directory of Open Access Journals (Sweden)

    Tania Bubela

    2015-02-01

    Full Text Available Material transfer agreements exist to facilitate the exchange of materials and associated data between researchers as well as to protect the interests of the researchers and their institutions. But this dual mandate can be a source of frustration for researchers, creating administrative burdens and slowing down collaborations. We argue here that in most cases in pre-competitive research, a simple agreement would suffice; the more complex agreements and mechanisms for their negotiation should be reserved for cases where the risks posed to the institution and the potential commercial value of the research reagents is high.

  12. Melting of Nanoprticle-Enhanced Phase Change Material inside Shell and Tube Heat Exchanger

    Directory of Open Access Journals (Sweden)

    Seiyed Mohammad Javad Hosseini

    2013-01-01

    Full Text Available This paper presents a numerical study of melting of Nanoprticle-Enhanced phase change material (NEPCM inside a shell and tube heat exchanger using RT50 and copper particles as base material and nanoparticle, respectively. In this study, the effects of nanoparticles dispersion (, 0.03, and 0.05 on melting time, liquid fraction, and penetration length are investigated. The results show that the melting time decreases to 14.6% and the penetration length increases to 146% with increasing volume fraction of nanoparticle up to .

  13. Comparison or organic and inorganic ion exchange materials for removal of cesium and strontium from Hanford waste

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.N.; Carson, K.J.; DesChane, J.R.; Elovich, R.J. [Pacific Northwest National Lab., Richland, WA (United States)

    1997-10-01

    This work is part of an ESP-CP task to develop and evaluate high-capacity, selective, solid extractants for the uptake of cesium, strontium, and technetium (Cs, Sr, and Tc) from nuclear wastes. Pacific Northwest National Laboratory (PNNL) staff, in collaboration with researchers from industry, academia, and national laboratories are investigating these and other novel and commercial ion exchangers for use in nuclear waste remediation of groundwater, HLW, and LLW. Since FY 1995, experimental work at PNNL has focused on small-scale batch distribution (K{sub d}) testing of numerous solid sorbents with actual and simulated Hanford wastes, chemical and radiolytic stability of various organic ion exchanger resins, bench-scale column ion exchange testing in actual and simulated Complexant Concentrate (CC) and Neutralized Current Acid Waste (NCAW), and Tc and Sr removal from groundwater and LLW. In addition, PNNL has continued to support various site demonstrations at the Idaho National Engineering Laboratory, Savannah River Site, West Valley Nuclear Services, Hanford N-Springs, and Hanford N-Basin using technologies developed by their industrial partners. This summary will focus on batch distribution results from the actual waste tests. The data collected in these development and testing tasks provide a rational basis for the selection and direct comparison of various ion exchange materials in simulated and actual HLW, LLW, and groundwater. In addition, prediction of large-scale column loading performance for the materials tested is possible using smaller volumes of actual waste solution. The method maximizes information while minimizing experimental expense, time, and laboratory and process wastes.

  14. Testing of empirical grounds for theoretical models of real exchange rate: research of real exchange rate between RSD and Euro

    Directory of Open Access Journals (Sweden)

    Predrag Petrović

    2013-04-01

    Full Text Available The focus of this research holds the most important determinants of real exchange rate covered by various theoretical models. The empirical testing was carried out on the real exchange rate between RSD and Euro for the period from January 2007 to December 2010, which was significantly imposed by availability of consistent time series. The research pertains to five basic model specifications and is based on the testing of time series cointegration by applying Johansen and Engle-Granger’s test. The obtained results have shown that the observed models do not have grounds in empirical data. Time series figuring in models are not cointegrated, and besides that, the estimated cointegration coefficients have signs opposite to the expected ones in large number of cases. In our opinion, the reasons for such findings can be found in the fact that used time series are quite short, i.e. they pertain to the period of only four years, as well as that prices of some significant services are still under the administrative control. Still, despite the aforementioned lacks, we think that our findings can be accepted as preliminary knowledge about the ability of the observed models to explain the dynamics of real exchange rate between RSD and Euro.

  15. Does Ownership Structure Influence Firm Value? An Empirical Research towards the Bucharest Stock Exchange Listed Companies

    National Research Council Canada - National Science Library

    Georgeta Vintila; Stefan Cristian Gherghina

    2015-01-01

      The aim of this study is to research the influence of ownership structure on firm value in order to provide, from our knowledge, the first results for the case of the Bucharest Stock Exchange listed companies...

  16. Synthesis of granular zeolitic materials with high cation exchange capacity from agglomerated coal fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Roberto Juan; Susana Hernandez; Jose Manuel Andres; Carmen Ruiz [Instituto de Carboquimica (CSIC), Zaragoza (Spain)

    2007-08-15

    Fly ash from coal combustion is a potential source of pollution and there is continuous interest in its recycling by converting it into products such as zeolitic materials for use in retaining pollutants. In this paper, production of granular zeolitic material from a commercially-unusable fine-fraction of a lightweight aggregate (LA) building material made from coal fly ash agglomerated with lime, by conventional alkaline activation is described. NaP1 zeolite, K-F zeolite, K-Phillipsite and K-Chabazite were synthesised. The process was optimised by combining four reaction parameters (temperature, alkali concentration, solution/fly ash ratio and reaction time). Zeolitic materials with the highest zeolite yields and cation exchange capacities were selected for future application in environmental processes. End-product zeolitic materials maintain its granular form and this could favour their use in some particular applications for environmental waste treatment (e.g. ionic exchange in column) without any further transformation stages. 21 refs., 6 figs., 6 tabs.

  17. High temperature corrosion of advanced ceramic materials for hot-gas filters and heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Kupp, E.R.; Trubelja, M.F.; Spear, K.E.; Tressler, R.E. [Pennsylvania State Univ., University Park, PA (United States)

    1995-08-01

    Experimental corrosion studies of hot gas filter materials and heat exchanger materials in oxidizing combustion environments have been initiated. Filter materials from 3M Co. and DuPont Lanxide Composites Inc. are being tested over a range of temperatures, times and gas flows. It has been demonstrated that morphological and phase changes due to corrosive effects occur after exposure of the 3M material to a combustion environment for as little as 25 hours at 800{degrees}C. The study of heat exchanger materials has focused on enhancing the corrosion resistance of DuPont Lanxide Dimox{trademark} composite tubes by adding chromium to its surfaces by (1) heat treatments in a Cr{sub 2}O{sub 3} powder bed, or (2) infiltrating surface porosity with molten chromium nitrate. Each process is followed by a surface homogenization at 1500{degrees}C. The powder bed method has been most successful, producing continuous Cr-rich layers with thicknesses ranging from 20 to 250 {mu}m. As-received and Cr-modified DuPont Lanxide Dimox{trademark} samples will be reacted with commonly encountered coal-ash slags to determine the Cr effects on corrosion resistance.

  18. Materials dispersion and biodynamics project research

    Science.gov (United States)

    Lewis, Marian L.

    1992-01-01

    The Materials Dispersion and Biodynamics Project (MDBP) focuses on dispersion and mixing of various biological materials and the dynamics of cell-to-cell communication and intracellular molecular trafficking in microgravity. Research activities encompass biomedical applications, basic cell biology, biotechnology (products from cells), protein crystal development, ecological life support systems (involving algae and bacteria), drug delivery (microencapsulation), biofilm deposition by living organisms, and hardware development to support living cells on Space Station Freedom (SSF). Project goals are to expand the existing microgravity science database through experiments on sounding rockets, the Shuttle, and COMET program orbiters and to evolve,through current database acquisition and feasibility testing, to more mature and larger-scale commercial operations on SSF. Maximized utilization of SSF for these science applications will mean that service companies will have a role in providing equipment for use by a number of different customers. An example of a potential forerunner of such a service for SSF is the Materials Dispersion Apparatus (MDA) 'mini lab' of Instrumentation Technology Associates, Inc. (ITA) in use on the Shuttle for the Commercial MDAITA Experiments (CMIX) Project. The MDA wells provide the capability for a number of investigators to perform mixing and bioprocessing experiments in space. In the area of human adaptation to microgravity, a significant database has been obtained over the past three decades. Some low-g effects are similar to Earth-based disorders (anemia, osteoporosis, neuromuscular diseases, and immune system disorders). As new information targets potential profit-making processes, services and products from microgravity, commercial space ventures are expected to expand accordingly. Cooperative CCDS research in the above mentioned areas is essential for maturing SSF biotechnology and to ensure U.S. leadership in space technology

  19. Materials for Electroactive Ion-Exchange (EaIX) Separations of Pertechnetate Ion

    Energy Technology Data Exchange (ETDEWEB)

    Stender, Matthias; Hubler, Timothy L.; Alhoshan, Mansour; Smyrl, William H.

    2004-03-29

    Many contaminants of interest to the U.S. Department of Energy (DOE) exist as anions (e.g. chromate, pertechnetate and nitrate). The objective of this study is to develop Electroactive Ion-Exchange (EaIX) materials. Such materials can be used to separate pertechnetate ion from radioactive wastes located at DOE sites while limiting the amount of secondary wastes generated. We have developed a synthetic strategy to prepare vinyl-bipyridyl and -terpyridyl ligands which allow incorporation of ion-selective architectures with a polymerizable handle. Fe complexes formed with these ligands provide the working core of the electroactive polymers. The polymers can be directly used as materials for EaIX or they can be incorporated into porous composite materials that are then used for EaIX.

  20. 2010 Membranes: Materials & Processes Gordon Research Conference

    Energy Technology Data Exchange (ETDEWEB)

    Jerry Lin

    2010-07-30

    The GRC series on Membranes: Materials and Processes have gained significant international recognition, attracting leading experts on membranes and other related areas from around the world. It is now known for being an interdisciplinary and synergistic meeting. The next summer's edition will keep with the past tradition and include new, exciting aspects of material science, chemistry, chemical engineering, computer simulation with participants from academia, industry and national laboratories. This edition will focus on cutting edge topics of membranes for addressing several grand challenges facing our society, in particular, energy, water, health and more generally sustainability. During the technical program, we want to discuss new membrane structure and characterization techniques, the role of advanced membranes and membrane-based processes in sustainability/environment (including carbon dioxide capture), membranes in water processes, and membranes for biological and life support applications. As usual, the informal nature of the meeting, excellent quality of the oral presentations and posters, and ample opportunity to meet many outstanding colleagues make this an excellent conference for established scientists as well as for students. A Gordon Research Seminar (GRS) on the weekend prior to the GRC meeting will provide young researchers an opportunity to present their work and network with outstanding experts. It will also be a right warm-up for the conference participants to join and enjoy the main conference.

  1. Materials and Molecular Research Division annual report, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    Research is presented concerning materials science including metallurgy and ceramics; solid state physics; and materials chemistry; chemical sciences covering radiation science, chemical physics, and chemical energy; nuclear science; coal research; solar energy; magnetic fusion, conservation; and environmental research. (FS)

  2. THE EFFECT OF THE ELECTRON-OPAQUE PORE MATERIAL ON EXCHANGES THROUGH THE NUCLEAR ANNULI

    Science.gov (United States)

    Feldherr, Carl M.

    1965-01-01

    To investigate the extent to which the electron-opaque pore material can regulate nucleocytoplasmic exchanges which occur through the nuclear annuli, experiments were performed in which polyvinylpyrrolidone (PVP)-coated colloidal gold particles (25 to 170 A in diameter) were microinjected into the cytoplasm of amebas (Amoeba proteus). The cells were fixed at various times after injection and examined with the electron microscope in order to determine the location of the gold particles. High concentrations of gold were found associated with the pore material at specific points adjacent to and within the pores. It is tentatively suggested that such specific accumulations could be a means of selecting substances from the cytoplasm for transport through the pores. Particles were also scattered throughout the ground cytoplasm and nucleoplasm. A comparison of the diameters of particles located in these two regions showed that the ability of materials to penetrate the nuclear envelope is a function of their size. It was estimated that the maximum size of the particles able to enter the nucleus is approximately 125 to 145 A indiameter. The regulation of exchanges with regard to particle size is thought to be dependent on the specific organization of the electron-opaque pore material. PMID:14283630

  3. State-of-the-art survey of joinability of materials for OTEC heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Beaver, R. J.

    1978-12-01

    Literature and industrial sources were surveyed to assess, on the basis of apparent economics and reliability, the joinability of both shell-and-tube and compact ocean thermal energy conversion (OTEC) heat exchangers. A no-leak requirement is mandatory to prevent mixing seawater and the ammonia working fluid. The operating temperature range considered is 7 to 28/sup 0/C (45 to 82/sup 0/F). Materials evaluated were aluminum, titanium, copper--nickel, AL-6X austenitic stainless steel, singly and in combination with steel and concrete. Many types of welding and brazing processes, roller expansion, magnaforming, O-ring sealing, and adhesive bonding were considered. The automatic gas tungsten-arc welding process and explosion welding processes are the only two joining processes that now appear to offer the high reliability required of no-leak shell-and-tube heat exchangers. Of these two processes, the gas tungsten-arc welding process appears to be the more economically attractive.

  4. Scalable Atomistic Simulation Algorithms for Materials Research

    Directory of Open Access Journals (Sweden)

    Aiichiro Nakano

    2002-01-01

    Full Text Available A suite of scalable atomistic simulation programs has been developed for materials research based on space-time multiresolution algorithms. Design and analysis of parallel algorithms are presented for molecular dynamics (MD simulations and quantum-mechanical (QM calculations based on the density functional theory. Performance tests have been carried out on 1,088-processor Cray T3E and 1,280-processor IBM SP3 computers. The linear-scaling algorithms have enabled 6.44-billion-atom MD and 111,000-atom QM calculations on 1,024 SP3 processors with parallel efficiency well over 90%. production-quality programs also feature wavelet-based computational-space decomposition for adaptive load balancing, spacefilling-curve-based adaptive data compression with user-defined error bound for scalable I/O, and octree-based fast visibility culling for immersive and interactive visualization of massive simulation data.

  5. Materials and Molecular Research Division annual report, 1977

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    Progress in research in structure of materials, mechanical, and physical properties, solid state physics, and materials chemistry, including chemical structure, high temperature and surface chemistry, is reported. (FS)

  6. Canada-Africa Research Exchange Grants (CAREG) : Pilot Phase ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Driving vaccine innovations to improve lives and livelihoods. Five world-class research teams are working to develop vaccines for neglected livestock diseases in the Global South. View moreDriving vaccine innovations to improve lives and livelihoods ...

  7. Policy analysis and recommendations for the DCM research data exchange.

    Science.gov (United States)

    2012-07-01

    This report is a policy analysis and set of recommendations regarding open data policies and policies for new, transformative data environments that are being developed as part of the Connected Vehicle research program. It is presented in three secti...

  8. Quantifying the Pathway and Predicting Spontaneous Emulsification during Material Exchange in a Two Phase Liquid System.

    Science.gov (United States)

    Spooner, Stephen; Rahnama, Alireza; Warnett, Jason M; Williams, Mark A; Li, Zushu; Sridhar, Seetharaman

    2017-10-30

    Kinetic restriction of a thermodynamically favourable equilibrium is a common theme in materials processing. The interfacial instability in systems where rate of material exchange is far greater than the mass transfer through respective bulk phases is of specific interest when tracking the transient interfacial area, a parameter integral to short processing times for productivity streamlining in all manufacturing where interfacial reaction occurs. This is even more pertinent in high-temperature systems for energy and cost savings. Here the quantified physical pathway of interfacial area change due to material exchange in liquid metal-molten oxide systems is presented. In addition the predicted growth regime and emulsification behaviour in relation to interfacial tension as modelled using phase-field methodology is shown. The observed in-situ emulsification behaviour links quantitatively the geometry of perturbations as a validation method for the development of simulating the phenomena. Thus a method is presented to both predict and engineer the formation of micro emulsions to a desired specification.

  9. Templated synthesis, postsynthetic metal exchange, and properties of a porphyrin-encapsulating metal-organic material

    KAUST Repository

    Zhang, ZhenJie

    2012-01-18

    Reaction of biphenyl-3,4′,5-tricarboxylate (H 3BPT) and CdCl 2 in the presence of meso-tetra(N-methyl-4-pyridyl)porphine tetratosylate (TMPyP) afforded porph@MOM-10, a microporous metal-organic material containing CdTMPyP cations encapsulated in an anionic Cd(II) carboxylate framework, [Cd 6(BPT) 4Cl 4(H 2O) 4]. Porph@MOM-10 is a versatile platform that undergoes exchange to serve as the parent of a series of porph@MOMs that exhibit permanent porosity and heterogeneous catalytic activity. © 2011 American Chemical Society.

  10. UDOT research peer exchange, October 12-13, 2016 : implementation, state DOT library, national committees, and state transportation innovation council.

    Science.gov (United States)

    2017-02-01

    The Utah Department of Transportation (UDOT) held a Research Peer Exchange on October 12-13, 2016, in downtown Salt Lake City. The focus topics or themes for the peer exchange included the following: : Supporting Implementation During and A...

  11. Canada-Latin America and the Caribbean Research Exchange ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Canada-Latin America and Caribbean Zika Virus Research Program. A new funding opportunity on Zika virus is responding to the virus outbreak and the health threat it represents for the affected populations in the hardest hit countries in Latin America and the... View moreCanada-Latin America and Caribbean Zika Virus ...

  12. Canada-Latin America and the Caribbean Research Exchange ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Like the three earlier phases (002624, 004097 and 101783), this project will allow the Association of Universities and Colleges of Canada (AUCC) to offer academics (graduate students, professors, researchers) from Canada and Latin America and the Caribbean (LAC) opportunities for face-to-face dialogue on ...

  13. Solid oxide materials research accelerated electrochemical testing

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, C.; Arey, B.

    1995-08-01

    The objectives of this work were to develop methods for accelerated testing of cathode materials for solid oxide fuel cells under selected operating conditions. The methods would be used to evaluate the performance of LSM cathode material.

  14. Solid oxide materials research accelerated electrochemical testing

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, T.R.; Windisch, C.; Arey, B.

    1995-12-31

    The objectives of this work were to develop methods for accelerated testing of cathode material for solid oxide fuel cells under selected operating conditions. The methods would be used to evaluate the performance of LSM cathode material.

  15. Imidazolium-Based Polymeric Materials as Alkaline Anion-Exchange Fuel Cell Membranes

    Science.gov (United States)

    Narayan, Sri R.; Yen, Shiao-Ping S.; Reddy, Prakash V.; Nair, Nanditha

    2012-01-01

    Polymer electrolyte membranes that conduct hydroxide ions have potential use in fuel cells. A variety of polystyrene-based quaternary ammonium hydroxides have been reported as anion exchange fuel cell membranes. However, the hydrolytic stability and conductivity of the commercially available membranes are not adequate to meet the requirements of fuel cell applications. When compared with commercially available membranes, polystyrene-imidazolium alkaline membrane electrolytes are more stable and more highly conducting. At the time of this reporting, this has been the first such usage for imidazolium-based polymeric materials for fuel cells. Imidazolium salts are known to be electrochemically stable over wide potential ranges. By controlling the relative ratio of imidazolium groups in polystyrene-imidazolium salts, their physiochemical properties could be modulated. Alkaline anion exchange membranes based on polystyrene-imidazolium hydroxide materials have been developed. The first step was to synthesize the poly(styrene-co-(1-((4-vinyl)methyl)-3- methylimidazolium) chloride through a free-radical polymerization. Casting of this material followed by in situ treatment of the membranes with sodium hydroxide solutions provided the corresponding hydroxide salts. Various ratios of the monomers 4-chloromoethylvinylbenzine (CMVB) and vinylbenzine (VB) provided various compositions of the polymer. The preferred material, due to the relative ease of casting the film, and its relatively low hygroscopic nature, was a 2:1 ratio of CMVB to VB. Testing confirmed that at room temperature, the new membranes outperformed commercially available membranes by a large margin. With fuel cells now in use at NASA and in transportation, and with defense potential, any improvement to fuel cell efficiency is a significant development.

  16. Towards efficient data exchange and sharing for big-data driven materials science: metadata and data formats

    Science.gov (United States)

    Ghiringhelli, Luca M.; Carbogno, Christian; Levchenko, Sergey; Mohamed, Fawzi; Huhs, Georg; Lüders, Martin; Oliveira, Micael; Scheffler, Matthias

    2017-11-01

    With big-data driven materials research, the new paradigm of materials science, sharing and wide accessibility of data are becoming crucial aspects. Obviously, a prerequisite for data exchange and big-data analytics is standardization, which means using consistent and unique conventions for, e.g., units, zero base lines, and file formats. There are two main strategies to achieve this goal. One accepts the heterogeneous nature of the community, which comprises scientists from physics, chemistry, bio-physics, and materials science, by complying with the diverse ecosystem of computer codes and thus develops "converters" for the input and output files of all important codes. These converters then translate the data of each code into a standardized, code-independent format. The other strategy is to provide standardized open libraries that code developers can adopt for shaping their inputs, outputs, and restart files, directly into the same code-independent format. In this perspective paper, we present both strategies and argue that they can and should be regarded as complementary, if not even synergetic. The represented appropriate format and conventions were agreed upon by two teams, the Electronic Structure Library (ESL) of the European Center for Atomic and Molecular Computations (CECAM) and the NOvel MAterials Discovery (NOMAD) Laboratory, a European Centre of Excellence (CoE). A key element of this work is the definition of hierarchical metadata describing state-of-the-art electronic-structure calculations.

  17. Research Objects for Sharing and Exchanging Research Data and Methods in Earth Science

    Science.gov (United States)

    Gómez Pérez, José Manuel; Palma, Raul

    2016-04-01

    Scientists in data-intensive disciplines increasingly call for models that go beyond the publication of datasets, allowing systematic capture of the lifecycle of scientific investigations and providing a single entry point for accessing information about (to name a few) the hypotheses investigated, the datasets used, the computations, observations and experiments carried out, their outcomes and provenance, the conclusions and findings that were derived, and even the scientists involved in a particular investigation. In this scenario, Research Objects provide a structured means to encapsulate such information and the associated methods involved, along with essential metadata and annotations aimed at both humans and computers. Research objects are therefore portable units of scientific knowledge that enable the sharing, preservation, scholarly communication, validation, and re-use of scientific outcomes. In this presentation we will focus on the application of the Research Object concept in observational disciplines and particularly Earth Science. We will present the main concepts behind research objects and discuss the challenges involved in the extension and adaptation of existing practices, modelling vocabularies, middleware and tools for these disciplines. By deploying research object technologies in Earth Science, we aim to enhance the portability of scientific materials and methods, the collaboration capabilities within and between teams of earth scientists, the quality and long-term preservation capabilities of the methods, and the means to communicate, validate and measure the impact of scientific outcomes. This work is being conducted in the context of the Horizon2020 EVER-EST project, the main objective of which is the development of a research object-centric virtual research environment for Earth Science communities.

  18. Proton exchange membrane materials for the advancement of direct methanol fuel-cell technology

    Science.gov (United States)

    Cornelius, Christopher J [Albuquerque, NM

    2006-04-04

    A new class of hybrid organic-inorganic materials, and methods of synthesis, that can be used as a proton exchange membrane in a direct methanol fuel cell. In contrast with Nafion.RTM. PEM materials, which have random sulfonation, the new class of materials have ordered sulfonation achieved through self-assembly of alternating polyimide segments of different molecular weights comprising, for example, highly sulfonated hydrophilic PDA-DASA polyimide segment alternating with an unsulfonated hydrophobic 6FDA-DAS polyimide segment. An inorganic phase, e.g., 0.5 5 wt % TEOS, can be incorporated in the sulfonated polyimide copolymer to further improve its properties. The new materials exhibit reduced swelling when exposed to water, increased thermal stability, and decreased O.sub.2 and H.sub.2 gas permeability, while retaining proton conductivities similar to Nafion.RTM.. These improved properties may allow direct methanol fuel cells to operate at higher temperatures and with higher efficiencies due to reduced methanol crossover.

  19. Investigation of material efficient fin patterns for cost-effective operation of fin and tube heat exchanger

    DEFF Research Database (Denmark)

    Singh, Shobhana; Sørensen, Kim; Condra, Thomas Joseph

    2017-01-01

    Design management of a thermal energy system is a critical part of identifying basic designs that meet large scale user demand under certain operating characteristics. Fin and tube heat exchangers are among the most commonly used thermal energy systems which are generating considerable interest...... and tube heat exchanger. Computational fluid dynamic models of fin and tube heat exchanger with different fin patterns are developed to investigate the fin pattern behavior on heat transfer and pressure loss performance data. In addition, the numerical results are utilized to analyze the engineering design...... scale-up heat exchanger configurations with each fin pattern focusing on the application of chosen fin and tube heat exchanger in marine exhaust gas boiler. The analysis highlights the impact of material efficient fin patterns investigated and predicts that the polynomial and sinusoidal fin patterns...

  20. Georgia Department of Transportation research peer exchange 2010, May 18-20, 2010.

    Science.gov (United States)

    2010-05-01

    In accordance with 23 Code of Federal Regulations (CFR), Section 420, Subpart B (Research, Development and Technology Transfer Program Management), Georgia Department of Transportation (GDOT) Office of Materials & Research hosted a Research Peer Exch...

  1. Preparation of a monolithic cation-exchange material with hydrophilic external layers by two-step reversible addition-fragmentation chain transfer polymerization.

    Science.gov (United States)

    Lin, Shen; Zhang, Yingying; Huang, Wei; Dong, Xiangchao

    2017-04-01

    In recent years, the efficient analysis of biological samples has become more important due to the advances of life science and pharmaceutical research and practice. Because biological sample pretreatment is the bottleneck for fast process, material development for efficient sample process in the high-performance liquid chromatography analysis is highly desirable. In this research, a cation-exchange restricted access monolithic column was synthesized by a reversible addition-fragmentation chain transfer polymerization method. Utilizing the controlled/living property of the reversible addition-fragmentation chain transfer method, a monolithic column of cross-linked poly(sulfopropyl methacrylate) was prepared first and then linear poly(glycerol mono-methacrylate) was immobilized covalently on the surface of the polymer. The monolithic material has both functionalities of cation-exchange and protein exclusion. Protein recovery of 94.6% was obtained after grafting of poly(glycerol mono-methacrylate) while the cation-exchange property of the column is still retained. In the study, the relation between the synthetic conditions and properties of the materials was studied. The synthesis conditions including the porogen, monomer concentration, and ratio of monomers/initiator/reversible addition-fragmentation chain transfer agent were optimized. The study provided a method for the preparation of restricted access monolithic columns: a bifunctional material by reversible addition-fragmentation chain transfer polymerization method. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Testing and Failure Mechanisms of Ice Phase Change Material Heat Exchangers

    Science.gov (United States)

    Leimkuehler, Thomas O.; Stephan, Ryan A.; Hawkins-Reynolds, Ebony

    2011-01-01

    Phase change materials (PCM) may be useful for thermal control systems that involve cyclical heat loads or cyclical thermal environments such as specific spacecraft orientations in Low Earth Orbit (LEO) and low beta angle Low Lunar Orbit (LLO). Thermal energy can be stored in the PCM during peak heat loads or in adverse thermal environments. The stored thermal energy can then be released later during minimum heat loads or in more favorable thermal environments. One advantage that PCM s have over evaporators in this scenario is that they do not use a consumable. The use of water as a PCM rather than the more traditional paraffin wax has the potential for significant mass reduction since the latent heat of formation of water is approximately 70% greater than that of wax. One of the potential drawbacks of using ice as a PCM is its potential to rupture its container as water expands upon freezing. In order to develop a space qualified ice PCM heat exchanger, failure mechanisms must first be understood. Therefore, a methodical experimental investigation has been undertaken to demonstrate and document specific failure mechanisms due to ice expansion in the PCM. A number of ice PCM heat exchangers were fabricated and tested. Additionally, methods for controlling void location in order to reduce the risk of damage due to ice expansion were investigated. This paper presents the results of testing that occurred from March through September of 2010 and builds on testing that occurred during the previous year.

  3. Development, Testing, and Failure Mechanisms of a Replicative Ice Phase Change Material Heat Exchanger

    Science.gov (United States)

    Leimkuehler, Thomas O.; Hansen, Scott; Stephan, Ryan A.

    2010-01-01

    Phase change materials (PCM) may be useful for thermal control systems that involve cyclical heat loads or cyclical thermal environments such as Low Earth Orbit (LEO) and Low Lunar Orbit (LLO). Thermal energy can be stored in the PCM during peak heat loads or in adverse thermal environments. The stored thermal energy can then be released later during minimum heat loads or in more favorable thermal environments. One advantage that PCM's have over evaporators in this scenario is that they do not use a consumable. Wax PCM units have been baselined for the Orion thermal control system and also provide risk mitigation for the Altair Lander. However, the use of water as a PCM has the potential for significant mass reduction since the latent heat of formation of water is approximately 70% greater than that of wax. One of the potential drawbacks of using ice as a PCM is its potential to rupture its container as water expands upon freezing. In order to develop a space qualified ice PCM heat exchanger, failure mechanisms must first be understood. Therefore, a methodical experimental investigation has been undertaken to demonstrate and document specific failure mechanisms due to ice expansion in the PCM. An ice PCM heat exchanger that replicates the thermal energy storage capacity of an existing wax PCM unit was fabricated and tested. Additionally, methods for controlling void location in order to reduce the risk of damage due to ice expansion are investigated. This paper presents the results to date of this investigation. Nomenclature

  4. Study on Pressure drop for Ion Exchanger in Jordan Research and Training Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ki-jung; Choi, Jungwoon; Kim, Seong-Hoon; Chi, Dae-Young; Park, Cheol [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The Jordan Research and Training Reactor (JRTR) is currently being constructed and commissioned in the JUST (Jordan University of Science and Technology) site. The main fluid systems relevant to the JRTR have been proceeding at the Korea Atomic Energy Research Institute. In order to achieve the purpose of the pool water purification, two filters and two ion exchangers which can be to remove suspended solids and ionic impurities in the in-taken pool water have been designed. For the reliable design of this system pump, it is important to predict the pressure drop of the system equipment including the ion exchanger. In this study, the pressure drop in the ion exchanger of PWMS is predicted by using the well-known model and the results provided from manufacturing company. And, the calculated results are compared to the actual data which is measured from the ion exchanger during the PWMS commissioning. The predicted pressure drop is dominated by the resin bed as a portion of about 85% for total pressure drop. The predicted pressure drop is compared to the measured pressure drop of the ion exchanger which is installed in the JRTR, the data above 5 kg/s agree within 5% in the entire range.

  5. Report on a survey in fiscal 1999. Survey on research exchange possibility; 1999 nendo kenkyu koryu kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This survey deals with research institutions of governmental organizations, universities, and business entities for the purpose of discussing the possibility of research exchange standing on a long-term point of view to serve for solving global environment problems, and the way the exchange should be. The research exchange shall cover the areas of trends in research and development of global environment related technologies, themes for the research and development, institutions for the research and development, and exchange of researchers and information with these research organizations. In fiscal 1999, three survey missions were dispatched to cover the following three areas: (1) surveys on research possibility of catalyst development by means of combinatorial chemistry, (2) surveys on research exchange possibility for thermo-chemical solar hybrid fuel production technologies, and (3) surveys on research exchange possibility for structuring function improving technologies of the 21st century type. Each survey mission has visited research institutions of the world to survey the trends in researches related to global environment, and the possibility of exchanging researches with RITE. The visits presented the following conclusions and findings: (1) the research on the combinatorial chemistry in the U.S.A. is still in the initial stage; (2) important findings were obtained when surveys were made on methane reformation utilizing solar heat, and coal gasification technologies in Europe; and (3) surveys were made on pioneering researches on plant molecule physiology in Europe. (NEDO)

  6. Recent Progress on the Key Materials and Components for Proton Exchange Membrane Fuel Cells in Vehicle Applications

    Directory of Open Access Journals (Sweden)

    Cheng Wang

    2016-07-01

    Full Text Available Fuel cells are the most clean and efficient power source for vehicles. In particular, proton exchange membrane fuel cells (PEMFCs are the most promising candidate for automobile applications due to their rapid start-up and low-temperature operation. Through extensive global research efforts in the latest decade, the performance of PEMFCs, including energy efficiency, volumetric and mass power density, and low temperature startup ability, have achieved significant breakthroughs. In 2014, fuel cell powered vehicles were introduced into the market by several prominent vehicle companies. However, the low durability and high cost of PEMFC systems are still the main obstacles for large-scale industrialization of this technology. The key materials and components used in PEMFCs greatly affect their durability and cost. In this review, the technical progress of key materials and components for PEMFCs has been summarized and critically discussed, including topics such as the membrane, catalyst layer, gas diffusion layer, and bipolar plate. The development of high-durability processing technologies is also introduced. Finally, this review is concluded with personal perspectives on the future research directions of this area.

  7. Electrical Materials Research for NASAs Hybrid Electric Commercial Aircraft Program

    Science.gov (United States)

    Bowman, Randy

    2017-01-01

    A high-level description of NASA GRC research in electrical materials is presented with a brief description of the AATTHGEP funding project. To be presented at the Interagency Advanced Power Group Electrical Materials panel session.

  8. Recent Trend of Research and Development on Materials for Railway

    National Research Council Canada - National Science Library

    SONE, Yasutomo

    2017-01-01

    .... This review describes some of the results from recent research and development conducted at RTRI in the field of material technologies, mainly contributing better functionality, and also presents analytical and measurement methods that assist progress in material technologies.

  9. Social justice and research using human biological material: A ...

    African Journals Online (AJOL)

    Social justice in the context of research using human biological material is an important contemporary legal-ethical issue. A question at the heart of this issue is the following: Is it fair to expect a research participant (a person who participates in such research by, among others, making available biological material from his or ...

  10. Research Progress of Building Materials Used in Construction Land

    Science.gov (United States)

    Niu, Yan

    2018-01-01

    Construction land preparation is an important aspect of land remediation project. The research of materials in the process of land improvement is the foundation and the core. Therefore, it is necessary to study the materials that may be involved in the process of building land preparation. In this paper, the research on the construction materials such as recycled concrete, geosynthetics, soil stabilizers, soil improvers, building insulation materials and inorganic fibrous insulation materials, which are commonly used in construction sites, is reviewed and discussed in this paper. Land remediation project involved in the construction of land materials to provide reference.

  11. Research highlights: microfluidically-fabricated materials.

    Science.gov (United States)

    Koh, Jaekyung; Wu, Chueh-Yu; Kittur, Harsha; Di Carlo, Dino

    2015-10-07

    Polymer particles with precise shapes or chemistries are finding unique uses in a variety of applications, including tissue engineering, drug delivery, barcoding, and diagnostic imaging. Microfluidic systems have been and are continuing to play a large role in enabling the precision synthesis of designer particles in a uniform manner. To expand the impact of these microfluidic-fabricated materials additional fundamental capabilities should still be developed. The capability to fabricate microparticles with complex three-dimensional shapes and increase the production rate of particles to an industrial scale will allow evaluation of shaped particles in a range of new applications to enhance biological, magnetic, optical, surface wetting, as well as other interfacial or mechanical properties of materials. Here we highlight work applying large collections of simple spherical microgels, with unique surface chemistry that allows in situ particle-particle annealing, to form microporous injectable scaffolds for accelerated tissue regeneration. We also report on two other techniques that are addressing the ability to create 3D-shaped microparticles by first sculpting a fluid precursor stream, and increasing the rate of production of particles using contact lithography to millions of particles per hour. The combination of these capabilities and the applications they will enable suggest a bright future for microfluidics in making the next materials.

  12. Custom-tailored adsorbers: A molecular dynamics study on optimal design of ion exchange chromatography material.

    Science.gov (United States)

    Lang, Katharina M H; Kittelmann, Jörg; Pilgram, Florian; Osberghaus, Anna; Hubbuch, Jürgen

    2015-09-25

    The performance of functionalized materials, e.g., ion exchange resins, depends on multiple resin characteristics, such as type of ligand, ligand density, the pore accessibility for a molecule, and backbone characteristics. Therefore, the screening and identification process for optimal resin characteristics for separation is very time and material consuming. Previous studies on the influence of resin characteristics have focused on an experimental approach and to a lesser extent on the mechanistic understanding of the adsorption mechanism. In this in silico study, a previously developed molecular dynamics (MD) tool is used, which simulates any given biomolecule on resins with varying ligand densities. We describe a set of simulations and experiments with four proteins and six resins varying in ligand density, and show that simulations and experiments correlate well in a wide range of ligand density. With this new approach simulations can be used as pre-experimental screening for optimal adsorber characteristics, reducing the actual number of screening experiments, which results in a faster and more knowledge-based development of custom-tailored adsorbers. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Engineer Research and Development Center's Materials Testing Center (MTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Engineer Research and Development Center's Materials Testing Center (MTC) is committed to quality testing and inspection services that are delivered on time and...

  14. Relating SLA Research to Language Teaching Materials

    Directory of Open Access Journals (Sweden)

    Vivian J. Cook

    1998-12-01

    Full Text Available Abstract This article discusses applications of Second Language Acquisition (SLA research to the preparation of language coursebooks. The author suggests a number of ways in which SLA research findings can help improve coursebooks and thereby enhance the learning of large numbers of students. Research leads us to consider learners as genuine speakers of the L2, as bilinguals who still have an L1 present in their minds and who do not all go about learning the L2 in the same way. Few coursebooks take into account these and other findings of SLA research, for example: that the acquisition of basic syntax precedes the acquisition of inflectional morphology, that most of the syntax to be learned is really part of the lexicon, or that vocabulary needs to be encountered in a structural and semantic context in order to be effectively acquired. Coursebook authors also need to bear in mind that pronunciation is necessary not only for communication but also for the actual learning of L2 forms, and that some aspects of the L2 writing system need to be explicitly taught. The author provides two sample lessons to illustrate how these research findings might be applied to the writing of a coursebook.

  15. Creating a data exchange strategy for radiotherapy research: towards federated databases and anonymised public datasets.

    Science.gov (United States)

    Skripcak, Tomas; Belka, Claus; Bosch, Walter; Brink, Carsten; Brunner, Thomas; Budach, Volker; Büttner, Daniel; Debus, Jürgen; Dekker, Andre; Grau, Cai; Gulliford, Sarah; Hurkmans, Coen; Just, Uwe; Krause, Mechthild; Lambin, Philippe; Langendijk, Johannes A; Lewensohn, Rolf; Lühr, Armin; Maingon, Philippe; Masucci, Michele; Niyazi, Maximilian; Poortmans, Philip; Simon, Monique; Schmidberger, Heinz; Spezi, Emiliano; Stuschke, Martin; Valentini, Vincenzo; Verheij, Marcel; Whitfield, Gillian; Zackrisson, Björn; Zips, Daniel; Baumann, Michael

    2014-12-01

    Disconnected cancer research data management and lack of information exchange about planned and ongoing research are complicating the utilisation of internationally collected medical information for improving cancer patient care. Rapidly collecting/pooling data can accelerate translational research in radiation therapy and oncology. The exchange of study data is one of the fundamental principles behind data aggregation and data mining. The possibilities of reproducing the original study results, performing further analyses on existing research data to generate new hypotheses or developing computational models to support medical decisions (e.g. risk/benefit analysis of treatment options) represent just a fraction of the potential benefits of medical data-pooling. Distributed machine learning and knowledge exchange from federated databases can be considered as one beyond other attractive approaches for knowledge generation within "Big Data". Data interoperability between research institutions should be the major concern behind a wider collaboration. Information captured in electronic patient records (EPRs) and study case report forms (eCRFs), linked together with medical imaging and treatment planning data, are deemed to be fundamental elements for large multi-centre studies in the field of radiation therapy and oncology. To fully utilise the captured medical information, the study data have to be more than just an electronic version of a traditional (un-modifiable) paper CRF. Challenges that have to be addressed are data interoperability, utilisation of standards, data quality and privacy concerns, data ownership, rights to publish, data pooling architecture and storage. This paper discusses a framework for conceptual packages of ideas focused on a strategic development for international research data exchange in the field of radiation therapy and oncology. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  16. International Materials Research Meeting in the Greater Region: “Current Trends in the Characterisation of Materials and Surface Modification”

    Science.gov (United States)

    2017-10-01

    Preface Dear ladies and gentlemen, On 6th and 7th of April 2017 took place the “International Materials Research Meeting in the Greater Region” at the Saarland University, Saarbrücken, Germany. This meeting corresponded to the 9th EEIGM International Conference on Advanced Materials Research and it was intended as a meeting place for researchers of the Greater Region as well as their partners of the different cooperation activities, like the EEIGM program, the ‘Erasmus Mundus’ Advanced Materials Science and Engineering Master program (AMASE), the ‘Erasmus Mundus’ Doctoral Program in Materials Science and Engineering (DocMASE) and the CREATe-Network. On this meeting, 72 participants from 15 countries and 24 institutions discussed and exchanged ideas on the latest trends in the characterization of materials and surface modifications. Different aspects of the material research of metals, ceramics, polymers and biomaterials were presented. As a conclusion of the meeting, the new astronaut of the European Space Agency Dr. Matthias Maurer, who is an alumni of the Saarland University and the EEIGM, held an exciting presentation about his activities. Following the publication of selected papers of the 2009 meeting in Volume 5 and 2012 meeting in Volume 31 of this journal, it is a great pleasure to present this selection of 9 articles to the readers of the IOP Conference Series: Materials Science and Engineering. The editors are thankful to all of the reviewers for reviewing the papers. Special praise is also given to the sponsors of the conference: European Commission within the program Erasmus Mundus (AMASE and DocMASE), Erasmus+ (AMASE), and Horizon2020 (CREATe-Network, Grant agreement No 644013): the DAAD (Alumni Program), and the German-French University (PhD-Track). List of Author signatures, Conference topics, Organization, Conference impressions and list of the participants are available in this PDF.

  17. F- and H-Area Seepage Basins Water Treatment System Process Optimization and Alternative Chemistry Ion Exchange/Sorbent Material Screening Clearwell Overflow Study

    Energy Technology Data Exchange (ETDEWEB)

    Serkiz, S.M.

    2000-08-30

    This study investigated alternative ion exchange/sorbent materials and polishing chemistries designed to remove specific radionuclides not removed during the neutralization/precipitation/clarification process.

  18. Research on plasma-facing component materials

    Energy Technology Data Exchange (ETDEWEB)

    Yu Jinnan [China Inst. of Atomic Energy (CIAE), Beijing, BJ (China); Chen Yiren [China Inst. of Atomic Energy (CIAE), Beijing, BJ (China); Wang Yuzhu [China Inst. of Atomic Energy (CIAE), Beijing, BJ (China); Zhang Wen [China Inst. of Atomic Energy (CIAE), Beijing, BJ (China); Xu Shuyan [China Inst. of Atomic Energy (CIAE), Beijing, BJ (China); Noda Tetsuji [National Research Institute for Metals, Ibaraki (Japan)

    1996-10-01

    An irradiation target chamber with rotatable table and cooling systems and a set of quadrupole magnetic lenses associated with the 14 MeV, short-pulse electron linear accelerator was used to irradiate high heat flux materials. The electron gamma shower simulation code (EGS4) was modified to calculate the displacement atom concentration, deposited energy density and damage dose with 14 MeV electron irradiation. The SiC/SiC composite specimens prepared by CVI using ethyl-trichloro-silane (ETS) as SiC source and SiC fiber is Nicalon NL-200, were irradiated with a cyclic 14 MeV electron beam. The thermal diffusivity and resistance of specimens were measured before and after irradiation as a function of temperature. (orig.).

  19. Changing the Landscape of Autism Research: The Autism Genetic Resource Exchange

    OpenAIRE

    Lajonchere, Clara M.

    2010-01-01

    Autism Speaks’ Autism Genetic Resource Exchange (AGRE) represents the largest private collection of genetic and phenotype data for families with ASD that is made available to qualified researchers worldwide. The availability of large and comprehensive registries that include detailed phenotype and genetic information for individuals affected with an ASD and family members is crucial for the discovery of autism susceptibility genes and the development and application of biologically-based appr...

  20. Researches within the Scope Of Articles Related Leader-Member Exchange Theory in Turkey: Bibliometric A Content Analysis as Bibliometrically

    OpenAIRE

    Alparslan, Ali Murat; Oktar, Ömer Faruk

    2015-01-01

    The aim of this study is conducting bibliometric content analysis on academic articles related leader-member exchange theory which published in Turkish literature. Thus, the contribution of Turkish literature to leader-member exchange theory will revealed. Moreover, this research will serve as an important assessment to who done research and will do research about this phenomenon. The scope of research, 20 published & accessible empiric article which in domestic literature until 2014 was revi...

  1. Applied solid state science advances in materials and device research

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 4 covers articles on single crystal compound semiconductors and complex polycrystalline materials. The book discusses narrow gap semiconductors and solid state batteries. The text then describes the advantages of hot-pressed microcrystalline compacts of oxygen-octahedra ferroelectrics over single crystal materials, as well as heterostructure junction lasers. Solid state physicists, materials scientists, electrical engineers, and graduate students studying the subjects being discussed will find the book invaluable.

  2. Study of thermal accumulators-exchangers containing low temperature (20-80c) phase transformation materials

    Energy Technology Data Exchange (ETDEWEB)

    Lecomte, D.

    1983-06-01

    After a review of the various types of heat exchanger technologies (especially the tube and plate types), an analytical and experimental study of a rotating cylinder dynamical accumulator-exchanger is presented and extended to a larger scale accumulator. The various analytical and numerical methods for the resolution of the heat equation in a diphasic medium and the problems caused by the presence of an exchanger and by the natural convection are described. Two approaches for the immersed tubular exchangers are compared and used to modelize a real storage system. A dimensioning procedure is then proposed.

  3. Promoting Scientific Transparency to Facilitate the Safe and Open International Exchange of Biological Materials and Electronic Data

    Directory of Open Access Journals (Sweden)

    Kenneth B. Yeh

    2017-10-01

    Full Text Available Scientific communication, collaboration and progress are enhanced through the exchange of data, materials and ideas. Recent advances in technology, commercial proprietary discovery and current local and global events (e.g., emerging human, animal and plant disease outbreaks have increased the demand, and shortened optimal timelines for material and data exchange, both domestically and internationally. Specific circumstances in each case, such as the type of material being transferred (i.e., select agent, disease-causing agent and assessed biosafety risk level and current events, dictate the level of agreements and requirements. Recent lessons learned from emerging disease issues and emergencies have demonstrated that human engagement and increased science diplomacy are needed to reinforce and sustain biosafety and biosecurity practices and processes, for better scientific transparency. A reasonable and accepted framework of guidance for open sharing of data and materials is needed that can be applied on multiple cooperative levels, including global and national. Although numerous agreement variations already exist for the exchange of materials and data, regulations to guide the development of both the language and implementation of such agreements are limited. Without such regulations, scientific exchange is often restricted, limiting opportunities for international capacity building, collaboration and cooperation. In this article, we present and discuss several international case histories that illustrate the complex nature of scientific exchange. Recommendations are made for a dual bottom-up and top-down approach that includes all stakeholders from beginning negotiation stages to emphasize trust and cooperation. The broader aim of this approach is to increase international scientific transparency and trust in a safe and open manner, supporting increased global one health security.

  4. Governing the postmortem procurement of human body material for research.

    Science.gov (United States)

    Van Assche, Kristof; Capitaine, Laura; Pennings, Guido; Sterckx, Sigrid

    2015-03-01

    Human body material removed post mortem is a particularly valuable resource for research. Considering the efforts that are currently being made to study the biochemical processes and possible genetic causes that underlie cancer and cardiovascular and neurodegenerative diseases, it is likely that this type of research will continue to gain in importance. However, post mortem procurement of human body material for research raises specific ethical concerns, more in particular with regard to the consent of the research participant. In this paper, we attempt to determine which consent regime should govern the post mortem procurement of body material for research. In order to do so, we assess the various arguments that could be put forward in support of a duty to make body material available for research purposes after death. We argue that this duty does in practice not support conscription but is sufficiently strong to defend a policy of presumed rather than explicit consent.

  5. 2004 research briefs :Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2004-01-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  6. 2003 research briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2003-08-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems and Materials Modeling and Computational Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  7. 2005 Research Briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2005-05-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  8. Preparation and characterization of 5-sulphosalicylic acid doped tetraethoxysilane composite ion-exchange material by sol–gel method

    Energy Technology Data Exchange (ETDEWEB)

    Rehman, Suhail-ul; Islam, Nasarul; Ahad, Sozia; Fatima, Syed Zeeshan; Pandith, Altaf Hussain, E-mail: altafpandit23@gmail.com

    2013-09-15

    Highlights: • Sulphosalicylic acid doped tetraethoxysilane composite is prepared by sol–gel method. •Its X-ray diffraction studies suggest that it is crystalline in nature. • This material shows selectivity for Mg(II) and Ni(II) ions in aqueous solutions. • Separation of Ni(II) from binary mixtures was successfully achieved on this material. -- Abstract: In this manuscript, we report the preparation and characterization of sulphosalicylic doped tetraethoxysilane (SATEOS), composite material by sol–gel method as a new ion exchanger for the removal of Ni(II) from aqueous solution. The fine granular material was prepared by acid catalyzed condensation polymerization through sol–gel mechanism in the presence of cationic surfactant. The material has an ion exchange capacity of 0.64 mequiv./g(dry) for sodium ions, 0.60 mequiv./g(dry) for potassium ions, 1.84 mequiv./g(dry) for magnesium ions, 1.08 mequiv./g(dry) for calcium ions and 1.36 mequiv./g(dry) for strontium ions. Its X-ray diffraction studies suggest that it is crystalline in nature. The material has been characterized by SEM, IR, TGA and DTG so as to identify the various functional groups and ion exchange sites present in this material. Quantum chemical computations at DFT/B3LYP/6-311G (d,p) level on model systems were performed to substantiate the structural conclusions based ion instrumental techniques. Investigations into the elution behaviour, ion exchange reversibility and distribution capacities of this material towards certain environmentally hazardous metal ions are also performed. The material shows good chemical stability towards acidic conditions and exhibits fast elution of exchangeable H{sup +} ions under neutral conditions. This material shows remarkable selectivity for Ni(II) and on the basis of its K{sub d} value (4 × 10{sup 2} in 0.01 M HClO{sub 4}) some binary separations of Ni(II) from other metal ions are performed.

  9. Art, Age & Health: A Research Journey about Developing Reminiscence Theatre in an Age-Exchange Project

    Directory of Open Access Journals (Sweden)

    Rikke Gürgens Gjærum

    2013-12-01

    Full Text Available In this article, the researcher studies how it is possible to develop a reminiscence theatre production in an age-exchange project, created with life stories from pensioners, and how the audience experiences the performance. The article is based on six focus group interviews with nine pensioners, a theatre production and a “reminiscence café” between the audience and the actors, arranged after the performance. The researcher designed the study, “The aged as a resource”, based on guidelines for performance ethnography, art-based research, practice-led research and artistic research, in order to combine science and art, which could be said to represent two different epistemological traditions.

  10. Material research for environmental sustainability in Thailand: current trends

    Science.gov (United States)

    Niranatlumpong, Panadda; Ramangul, Nudjarin; Dulyaprapan, Pongsak; Nivitchanyong, Siriluck; Udomkitdecha, Werasak

    2015-06-01

    This article covers recent developments of material research in Thailand with a focus on environmental sustainability. Data on Thailand’s consumption and economic growth are briefly discussed to present a relevant snapshot of its economy. A selection of research work is classified into three topics, namely, (a) resource utilization, (b) material engineering and manufacturing, and (c) life cycle efficiency. Material technologies have been developed and implemented to reduce the consumption of materials, energy, and other valuable resources, thus reducing the burden we place on our ecological system. At the same time, product life cycle study allows us to understand the extent of the environmental impact we impart to our planet.

  11. Material Transfer Agreement (MTA) | FNLCR

    Science.gov (United States)

    Material Transfer Agreements are appropriate for exchange of materials into or out of the Frederick National Labfor research or testing purposes, with no collaborative research by parties involving the materials.

  12. High Temperature Heat Exchanger Project

    Energy Technology Data Exchange (ETDEWEB)

    Anthony E. Hechanova, Ph.D.

    2008-09-30

    The UNLV Research Foundation assembled a research consortium for high temperature heat exchanger design and materials compatibility and performance comprised of university and private industry partners under the auspices of the US DOE-NE Nuclear Hydrogen Initiative in October 2003. The objectives of the consortium were to conduct investigations of candidate materials for high temperature heat exchanger componets in hydrogen production processes and design and perform prototypical testing of heat exchangers. The initial research of the consortium focused on the intermediate heat exchanger (located between the nuclear reactor and hydrogen production plan) and the components for the hydrogen iodine decomposition process and sulfuric acid decomposition process. These heat exchanger components were deemed the most challenging from a materials performance and compatibility perspective

  13. Magnetic materials in Japan research, applications and potential

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. This, the third report in Elsevier's Materials Technology in Japan series, concentrates on magnetic materials as a topic gaining worldwide attention, and each chapter looks not only at current research, but also describes the technology as it is being applied and its future potential. Magnetic-related research is the second largest field of research in Japan after semiconductors, with the estimated number of researchers and engineers engaged in magnetics-related activities currently at 20,000. This research report serves as both a review of

  14. Optimization research of sextant fan baffle curvature radius in shell and tube heat exchanger

    Science.gov (United States)

    Jin, M.; Liu, H. J.; Wang, X. Y.

    2017-09-01

    For a high shell side pressure drop of the conventional segmental baffles in shell and tube heat exchanger, a novel sextant fan baffle was put forward. To research the influence of baffle curvature radius of the sextant fan baffled shell and tube heat exchanger (SFTHX) on the shell side pressure drop, the heat transfer coefficient and the comprehensive heat transfer performance, six different curvature radius baffles were numerically simulated and experimental studied in this paper. Based on the numerically simulation results, under the same inlet flow conditions, a better comprehensive heat transfer performance can be found in SFTHX with the baffle curvature radius of 1 D, which is higher by 0.84-6.85% more than that of the others. Moreover, the experimental investigation data of SFTHX with baffle curvature radius of 1 D indicates that the numerically simulation can well predict the flow and heat transfer characteristics with the experiment.

  15. PREFACE: MRS International Materials Research Conference (IMRC-2008)

    Science.gov (United States)

    Wang, Zhanguo; Qiu, Yong; Li, Yongxiang

    2009-03-01

    This volume contains selected papers presented at the MRS International Materials Research Conference (IMRC-2008) held in Chongqing, China, 9-12 June 2008. IMRC-2008 included 9 symposia of A. Eco/Environmental Materials, B. Sustainable Energy Materials, C. Electronic Packaging Materials, D. Electronic Materials, E. Materials and Processes for Flat-panel Displays, F. Functional Ceramics, G. Transportation Materials, H. Magnesium and I. Biomaterials for Medical Applications. Nearly 1200 participants from 33 countries attended the conference, and the conference organizers received more than 700 papers. After the peer review processes, 555 papers were selected to be published in 9 Journals or proceedings, including J. of Materials Research (JMR), Rare Metal Materials and Engineering, J. of Univ. Science and Technology Beijing, Biomedical Materials: Materials for Tissue Engineering and Regenerative Medicine, Chinese Journal of Aeronautics, Materials Science Forum, and Journal of Physics: Conference Series. Among the 555 selected papers, 91 papers are published in this volume, and the topics mainly cover electronic matrials, processes for flat-panel displays and functional ceramics. The editors would like to give special thanks to the graduate students Liwu Jiang, Ming Li and Di He from Beihang University for their hard work compiling and typesetting each paper in this volume. Zhanguo Wang, Yong Qiu and Yongxiang Li Editors

  16. Advanced Propulsion Research Interest in Materials for Propulsion

    Science.gov (United States)

    Cole, John

    2003-01-01

    This viewgraph presentation provides an overview of material science and technology in the area of propulsion energetics. The authors note that conventional propulsion systems are near peak performance and further refinements in manufacturing, engineering design and materials will only provide incremental increases in performance. Energetic propulsion technologies could potential solve the problems of energy storage density and energy-to-thrust conversion efficiency. Topics considered include: the limits of thermal propulsion systems, the need for energetic propulsion research, emerging energetic propulsion technologies, materials research needed for advanced propulsion, and potential research opportunities.

  17. High throughput materials research and development for lithium ion batteries

    Directory of Open Access Journals (Sweden)

    Parker Liu

    2017-09-01

    Full Text Available Development of next generation batteries requires a breakthrough in materials. Traditional one-by-one method, which is suitable for synthesizing large number of sing-composition material, is time-consuming and costly. High throughput and combinatorial experimentation, is an effective method to synthesize and characterize huge amount of materials over a broader compositional region in a short time, which enables to greatly speed up the discovery and optimization of materials with lower cost. In this work, high throughput and combinatorial materials synthesis technologies for lithium ion battery research are discussed, and our efforts on developing such instrumentations are introduced.

  18. Microcalorimetric study of adsorption of human monoclonal antibodies on cation exchange chromatographic materials.

    Science.gov (United States)

    Dieterle, Michael; Blaschke, Tim; Hasse, Hans

    2008-09-26

    Adsorption of two human monoclonal antibodies on two different strong cation exchange resins is studied by isothermal titration microcalorimetry and independent adsorption isotherm measurements. The pH value is varied between 4.5 and 7.0, using different buffer systems, the temperature is always 25 degrees C. The adsorption isotherm data is fitted using two different Langmuir type models. Combining the calorimetric and the adsorption data, the specific enthalpy of adsorption of the protein Deltah(p)(ads) is determined. At pH values near 7.0, where the antibodies are only weakly charged, the adsorption is exothermal. At small loadings the absolute number of Deltah(p)(ads) is then large and almost constant but it significantly decreases at higher loadings. This shows that the arrangement of antibody molecules on the absorber material depends on the loading and is less favourable at higher loadings. Despite the high positive charge of the antibody at pH values of about 5 the value of Deltah(p)(ads) is almost zero along the entire isotherm. Furthermore, at pH 4.5 even endothermal effects are observed, although high binding capacities are found. At these conditions the adsorption process seems to be strongly influenced by the ions bound to the antibody. Their release upon absorption explains the endothermal caloric effect. The adsorption equilibrium constant K(eq) is calculated from the isotherms. From Deltag(p)(ads) and the calorimetric results for Deltah(p)(ads), Deltas(p)(ads), the entropy change upon adsorption of the protein is found for the different studied conditions.

  19. Knowledge exchange in the CREATE project - Colour Research for European Advanced Technology Employment

    Science.gov (United States)

    Parraman, Carinna; Rizzi, Alessandro

    2011-01-01

    The presentation will review a four-year European funded project CREATE (Colour Research for European Advanced Technology Employment), which was established in 2006. The group came together to promote and exchange research and knowledge through a series of conferences and training courses to researchers working in Europe who were in the early stages of their career. The long-term objective was to address a broad range of themes in colour and to develop with artists, designers, technologists and scientists a cross disciplinary approach to improving colour communication and education and to provide a forum for dialogue between different fields. Now at the end of the funding programme, this paper will highlight some of the key milestones of the project. Moreover, having completed a supplementary workshop event in October 2010, researchers considered new themes for the future.

  20. Synthesis and characterization of a novel hybrid material as amphoteric ion exchanger for simultaneous removal of cations and anions.

    Science.gov (United States)

    Shah, Brijesh; Chudasama, Uma

    2014-07-15

    A new hybrid chelating ion exchanger zirconium diethylene triamine (ZrD) has been synthesized by a simple sol-gel route using inexpensive and easily available chemicals. ZrD has been characterized for elemental analysis (ICP-AES, CHN analysis), TGA, FTIR, X-ray diffraction, SEM and EDX. Physical and ion exchange characteristics as well as chemical stability of the material in various media have been studied. Structural determination reveals that ZrD exhibits amphoteric character. Anion exchange capacity (AEC) for Cl(-), Br(-), Cr2O7(2-), F(-) and AsO4(3-) has been determined. Cations are exchanged through chelation where coordinating sites are offered by nitrogen atoms present in the amine groups of ZrD. Distribution coefficient Kd for Co(2+), Ni(2+), Cu(2+), Zn(2+) (transition metal ions) and Hg(2+), Cd(2+), Pb(2+) (heavy metal ions) has been evaluated by batch equilibration techniques in aqueous and various electrolyte media/concentrations. Based on α the separation factor, a few binary separations have been performed on a chromatographic column packed with ZrD. The amphoteric behaviour of ZrD has been demonstrated by simultaneous exchange of Cu(2+) and Cl(-) in CuCl2. A study on the regeneration and reuse of ZrD indicates that it is effective upto four cycles without much decline in performance. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Fossil Energy Advanced Research and Technology Development Materials Program

    Energy Technology Data Exchange (ETDEWEB)

    Cole, N.C.; Judkins, R.R. (comps.)

    1992-12-01

    Objective of this materials program is to conduct R and D on materials for fossil energy applications with focus on longer-term and generic needs of the various fossil fuel technologies. The projects are organized according to materials research areas: (1) ceramics, (2) new alloys: iron aluminides, advanced austenitics and chromium niobium alloys, and (3) technology development and transfer. Separate abstracts have been prepared.

  2. Research and development of advanced materials using ion beam

    Energy Technology Data Exchange (ETDEWEB)

    Namba, Susumu [Nagasaki Inst. of Applied Science, Nagasaki (Japan)

    1997-03-01

    A wide range of research and development activities of advanced material synthesis using ion beams will be discussed, including ion beam applications to the state-of-the-art electronics from giant to nano electronics. (author)

  3. Research Tools and Materials | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Research Tools can be found in TTC's Available Technologies and in scientific publications. They are freely available to non-profits and universities through a Material Transfer Agreement (or other appropriate mechanism), and available via licensing to companies.

  4. Film Music: The Material, Literature and Present State of Research.

    Science.gov (United States)

    Marks, Martin

    1982-01-01

    A comprehensive look at the neglected art of film music. Examines the nature of the medium, the literature (how others have wrestled with film music's recalcitrant materials), and the present state of research into film music. Includes a bibliography. (PD)

  5. High Pressure Research on Materials-Experimental Techniques to ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 8. High Pressure Research on Materials - Experimental Techniques to Study the Behaviour of Materials Under High Pressure. P Ch Sahu N V Chandra Shekar. General Article Volume 12 Issue 8 August 2007 pp 49-64 ...

  6. Materials and Molecular Research Division annual report 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-06-01

    Progress made in the following research areas is reported: materials sciences (metallurgy and ceramics, solid state physics, materials chemistry); chemical sciences (fundamental interactions, processes and techniques); nuclear sciences; fossil energy; advanced isotope separation technology; energy storage; magnetic fusion energy; and nuclear waste management.

  7. Changing the landscape of autism research: the autism genetic resource exchange.

    Science.gov (United States)

    Lajonchere, Clara M

    2010-10-21

    Autism Speaks' Autism Genetic Resource Exchange (AGRE) represents the largest private collection of genetic and phenotype data for families with ASD that is made available to qualified researchers worldwide. The availability of large and comprehensive registries that include detailed phenotype and genetic information for individuals affected with an ASD and family members is crucial for the discovery of autism susceptibility genes and the development and application of biologically based approaches to diagnosis and treatment. The model that AGRE has developed can be applied broadly to other disorders with complex etiologies. Copyright © 2010 Elsevier Inc. All rights reserved.

  8. Effect of Material Ion Exchanges on the Mechanical Stiffness Properties and Shear Deformation of Hydrated Cement Material Chemistry Structure C-S-H Jennit - A Computational Modeling Study

    Science.gov (United States)

    2014-01-01

    to improve material performances. For example, cementitious materials that are the binders for mortar and concrete have material, geometrical... nanotechnology research from the nascent exploratory research which was initiated mostly to understand underlining principles to designing new materials...2005. 4. Taylor, H.F., Cement chemistry. 1997: Thomas Telford. 5. Mindess, S., J.F. Young, and D. Darwin, Concrete . 2003. 6. Nonat, A., The

  9. DOE Automotive Composite Materials Research: Present and Future Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Warren, C.D.

    1999-08-10

    One method of increasing automotive energy efficiency is through mass reduction of structural components by the incorporation of composite materials. Significant use of glass reinforced polymers as structural components could yield a 20--30% reduction in vehicle weight while the use of carbon fiber reinforced materials could yield a 40--60% reduction in mass. Specific areas of research for lightweighting automotive components are listed, along with research needs for each of these categories: (1) low mass metals; (2) polymer composites; and (3) ceramic materials.

  10. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Study on possibility of research exchanges; 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo seika hokokusho. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the study on possibility of research exchanges, conducted by Research Institute of Innovative Technology for the Earth (RITE) in FY 2000. For development of thin-film catalysts, HTE, a venture developing combinatorial chemistry application to catalysts, is a potential partner for the exchanges. One of the technical problems involved in underground sequestration of CO2 relates to evaluation of the reactions between CO2 injected under pressure and the surrounding rocks. It is a less site-specific theme, and preferably pursued through international networks. The RITE delegates have visited the British Geological Survey, Canada's Alberta Research Council, and US's Pennsylvania State University, Rice University and Chevron Petroleum, finding research exchange possibilities in all of these organizations for broad technical themes related to underground sequestration of CO2. For energy conversion technologies using biomass resources as the source materials, the potential partners for the research exchanges include Swedish Royal Institute of Technology, Belgium's Catholic University of Louvain and Spain's University of Zaragona which leads researches in production of gases from wastes and biomass. (NEDO)

  11. [Research progress of scaffold materials in skeletal muscle tissue engineering].

    Science.gov (United States)

    Huang, Weiyi; Liao, Hua

    2010-11-01

    To review the current researches of scaffold materials for skeletal muscle tissue engineering, to predict the development trend of scaffold materials in skeletal muscle tissue engineering in future. The related literature on skeletal muscle tissue engineering, involving categories and properties of scaffold materials, preparative technique and biocompatibility, was summarized and analyzed. Various scaffold materials were used in skeletal muscle tissue engineering, including inorganic biomaterials, biodegradable polymers, natural biomaterial, and biomedical composites. According to different needs of the research, various scaffolds were prepared due to different biomaterials, preparative techniques, and surface modifications. The development trend and perspective of skeletal muscle tissue engineering are the use of composite materials, and the preparation of composite scaffolds and surface modification according to the specific functions of scaffolds.

  12. Community-based knowledge transfer and exchange: Helping community-based organizations link research to action

    Directory of Open Access Journals (Sweden)

    Lavis John N

    2010-04-01

    Full Text Available Abstract Background Community-based organizations (CBOs are important stakeholders in health systems and are increasingly called upon to use research evidence to inform their advocacy, program planning, and service delivery efforts. CBOs increasingly turn to community-based research (CBR given its participatory focus and emphasis on linking research to action. In order to further facilitate the use of research evidence by CBOs, we have developed a strategy for community-based knowledge transfer and exchange (KTE that helps CBOs more effectively link research evidence to action. We developed the strategy by: outlining the primary characteristics of CBOs and why they are important stakeholders in health systems; describing the concepts and methods for CBR and for KTE; comparing the efforts of CBR to link research evidence to action to those discussed in the KTE literature; and using the comparison to develop a framework for community-based KTE that builds on both the strengths of CBR and existing KTE frameworks. Discussion We find that CBR is particularly effective at fostering a climate for using research evidence and producing research evidence relevant to CBOs through community participation. However, CBOs are not always as engaged in activities to link research evidence to action on a larger scale or to evaluate these efforts. Therefore, our strategy for community-based KTE focuses on: an expanded model of 'linkage and exchange' (i.e., producers and users of researchers engaging in a process of asking and answering questions together; a greater emphasis on both producing and disseminating systematic reviews that address topics of interest to CBOs; developing a large-scale evidence service consisting of both 'push' efforts and efforts to facilitate 'pull' that highlight actionable messages from community relevant systematic reviews in a user-friendly way; and rigorous evaluations of efforts for linking research evidence to action. Summary

  13. [Research progress in electrospinning technique for biomedical materials].

    Science.gov (United States)

    Cai, Zhijiang; Yang, Guang

    2010-12-01

    Electrospinning is a very effective way to prepare scaffolds for biomedical applications. However, conventional electrospinning technique has shortcomings for this purpose. Modification studies on electrospinning technique have been conducted by more and more researchers. This paper summaries the research progress in electrospinning technique for biomedical materials.

  14. Assessment of research needs for wind turbine rotor materials technology

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    1991-01-01

    ... on Assessment of Research Needs for Wind Turbine Rotor Materials Technology Energy Engineering Board Commission on Engineering and Technical Systems National Research Council NATIONAL ACADEMY PRESS Washington, D.C. 1991 Copyrightthe true use are Please breaks Page inserted. accidentally typesetting been have may original the from errors not...

  15. Materials science research for sodium cooled fast reactors

    Indian Academy of Sciences (India)

    The paper gives an insight into basic as well as applied research being carried out at the Indira Gandhi Centre for Atomic Research for the development of advanced materials for sodium cooled fast reactors towards extending the life of reactors to nearly 100 years and the burnup of fuel to 2,00,000 MWd/t with an objective ...

  16. Materials Science Research Rack Onboard the International Space Station Hardware and Operations

    Science.gov (United States)

    Lehman, John R.; Frazier, Natalie C.; Johnson, Jimmie

    2012-01-01

    telemetry commands from the ground. Initially, 12 SCAs were processed in the first furnace insert for a team of European and US investigators. After these samples were processed the Furnaces Inserts were exchanged and an additional single sample was processed. The processed samples have been returned to Earth for evaluation and comparison of their properties to samples similarly processed on the ground. A preliminary examination of the samples indicates that the majority of the desired science objectives have been successfully met leading to significant improvements in the understanding of alloy solidification processes. Six SCAs were launched on Space Shuttle Mission STS-135 in July 2011 for processing during the Fall of 2011. Additional batches are planned for future processing. This facility is available to support additional materials science investigations through programs such as the US National Laboratory, Technology Development, NASA Research Announcements, and others.

  17. Tooth regeneration: challenges and opportunities for biomedical material research.

    Science.gov (United States)

    Du, Chang; Moradian-Oldak, Janet

    2006-03-01

    Tooth regeneration presents many challenges to researchers in the fields of biology, medicine and material science. This review considers the opportunities for biomedical material research to contribute to this multidisciplinary endeavor. We present short summaries and an overview on the collective knowledge of tooth developmental biology, advances in stem-cell research, and progress in the understanding of the tooth biomineralization principles as they provide the foundation for developing strategies for reparative and regenerative medicine. We emphasize that various biomaterials developed via biomimetic strategies have great potential for tooth tissue engineering and regeneration applications. The current practices in tooth tissue engineering approaches and applications of biomimetic carriers or scaffolds are also discussed.

  18. Life Science Research Facility materials management requirements and concepts

    Science.gov (United States)

    Johnson, Catherine C.

    1986-01-01

    The Advanced Programs Office at NASA Ames Research Center has defined hypothetical experiments for a 90-day mission on Space Station to allow analysis of the materials necessary to conduct the experiments and to assess the impact on waste processing of recyclable materials and storage requirements of samples to be returned to earth for analysis as well as of nonrecyclable materials. The materials include the specimens themselves, the food, water, and gases necessary to maintain them, the expendables necessary to conduct the experiments, and the metabolic products of the specimens. This study defines the volumes, flow rates, and states of these materials. Process concepts for materials handling will include a cage cleaner, trash compactor, biological stabilizer, and various recycling devices.

  19. From science to action: Principles for undertaking environmental research that enables knowledge exchange and evidence-based decision-making.

    Science.gov (United States)

    Cvitanovic, C; McDonald, J; Hobday, A J

    2016-12-01

    Effective conservation requires knowledge exchange among scientists and decision-makers to enable learning and support evidence-based decision-making. Efforts to improve knowledge exchange have been hindered by a paucity of empirically-grounded guidance to help scientists and practitioners design and implement research programs that actively facilitate knowledge exchange. To address this, we evaluated the Ningaloo Research Program (NRP), which was designed to generate new scientific knowledge to support evidence-based decisions about the management of the Ningaloo Marine Park in north-western Australia. Specifically, we evaluated (1) outcomes of the NRP, including the extent to which new knowledge informed management decisions; (2) the barriers that prevented knowledge exchange among scientists and managers; (3) the key requirements for improving knowledge exchange processes in the future; and (4) the core capacities that are required to support knowledge exchange processes. While the NRP generated expansive and multidisciplinary science outputs directly relevant to the management of the Ningaloo Marine Park, decision-makers are largely unaware of this knowledge and little has been integrated into decision-making processes. A range of barriers prevented efficient and effective knowledge exchange among scientists and decision-makers including cultural differences among the groups, institutional barriers within decision-making agencies, scientific outputs that were not translated for decision-makers and poor alignment between research design and actual knowledge needs. We identify a set of principles to be implemented routinely as part of any applied research program, including; (i) stakeholder mapping prior to the commencement of research programs to identify all stakeholders, (ii) research questions to be co-developed with stakeholders, (iii) implementation of participatory research approaches, (iv) use of a knowledge broker, and (v) tailored knowledge management

  20. Limitations and potentials of design materials within collaborative research practices

    DEFF Research Database (Denmark)

    Gunn, Wendy; Said Mosleh, Wafa

    The workshop explores the limitations and potentials of design materials to instigate cross-disciplinary research across a university’s technical, humanities and social science faculties. Our aim is to understand possibilities for wider participation within research processes and practices...... and to propose future directions for involving a broader grouping of peoples. During the workshop we will engage participants in the co-analysis of documentation generated through a series of open space research seminars, whereby design was the process of inquiry (2013 – ongoing at SDU Design Research). SDU...... Design Research, University of Southern Denmark attempts to provide a collaborative research environment, which embraces design from a set of complementary methods and methodologies. Findings from the workshop will contribute to a wider debate focusing on the affects of design materials in collaborations...

  1. Materials Science Research Rack Onboard the International Space Station

    Science.gov (United States)

    Reagan, S. E.; Lehman, J. R.; Frazier, N. C.

    2016-01-01

    The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and ESA for materials science investigations on the International Space Station (ISS). MSRR was launched on STS-128 in August 2009 and currently resides in the U.S. Destiny Laboratory Module. Since that time, MSRR has logged more than 1400 hours of operating time. The MSRR accommodates advanced investigations in the microgravity environment on the ISS for basic materials science research in areas such as solidification of metals and alloys. The purpose is to advance the scientific understanding of materials processing as affected by microgravity and to gain insight into the physical behavior of materials processing. MSRR allows for the study of a variety of materials, including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. The NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA-developed Materials Science Laboratory (MSL) that accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400degC. ESA continues to develop samples with 14 planned for launch and processing in the near future. Additionally NASA has begun developing SCAs to

  2. Psychotherapy research needs theory. Outline for an epistemology of the clinical exchange.

    Science.gov (United States)

    Salvatore, Sergio

    2011-09-01

    This paper provides an analysis of a basic assumption grounding the clinical research: the ontological autonomy of psychotherapy-based on the idea that the clinical exchange is sufficiently distinguished from other social objects (i.e. exchange between teacher and pupils, or between buyer and seller, or interaction during dinner, and so forth). A criticism of such an assumption is discussed together with the proposal of a different epistemological interpretation, based on the distinction between communicative dynamics and the process of psychotherapy-psychotherapy is a goal-oriented process based on the general dynamics of human communication. Theoretical and methodological implications are drawn from such a view: It allows further sources of knowledge to be integrated within clinical research (i.e. those coming from other domains of analysis of human communication); it also enables a more abstract definition of the psychotherapy process to be developed, leading to innovative views of classical critical issues, like the specific-nonspecific debate. The final part of the paper is devoted to presenting a model of human communication--the Semiotic Dialogical Dialectic Theory--which is meant as the framework for the analysis of psychotherapy.

  3. An overview of computational life science databases & exchange formats of relevance to chemical biology research.

    Science.gov (United States)

    Smalter Hall, Aaron; Shan, Yunfeng; Lushington, Gerald; Visvanathan, Mahesh

    2013-03-01

    Databases and exchange formats describing biological entities such as chemicals and proteins, along with their relationships, are a critical component of research in life sciences disciplines, including chemical biology wherein small information about small molecule properties converges with cellular and molecular biology. Databases for storing biological entities are growing not only in size, but also in type, with many similarities between them and often subtle differences. The data formats available to describe and exchange these entities are numerous as well. In general, each format is optimized for a particular purpose or database, and hence some understanding of these formats is required when choosing one for research purposes. This paper reviews a selection of different databases and data formats with the goal of summarizing their purposes, features, and limitations. Databases are reviewed under the categories of 1) protein interactions, 2) metabolic pathways, 3) chemical interactions, and 4) drug discovery. Representation formats will be discussed according to those describing chemical structures, and those describing genomic/proteomic entities.

  4. Research of properties of modern heat-insulation materials

    Directory of Open Access Journals (Sweden)

    A. S. Shcherbak

    2013-04-01

    Full Text Available Purpose. To study the modern heat-insulating materials presented at the market of Ukraine and to estimate the efficiency of their application. Methodology. Research and analysis of heat-insulating materials presented at the market of Ukraine, according to the existing standards. Findings. To ensure the energy efficiency in buildings and constructions it is necessary to apply the domestic heat-insulating material, which possesses the given thermo technical characteristics, reduced indexes of water absorption, flammability and toxicity, as well as durability and relatively low self–cost. Originality. Basic heat-insulating materials, which are most widely used in construction are systematized, the researches of their properties are conducted and the foam glass is chosen as the most effective heat-insulating material. It is characterized by high thermo technical characteristics and possesses the best ecological indexes, as well as the sturdiness for aggressive factors influence. Practical value. Special attention deserves the insulating material foam glass, which is a synthetic silicate material with evenly placed pores (0.1 ... 5.0 mm separated by thin septa with a vitreous substance possesses the necessary properties and by aforesaid may be accepted for studies aimed its improvement (modification. The results of researches can be applied in the foam glass production, which is used for heat-insulation of buildings and constructions, equipment, pipelines etc.

  5. Molecularly Engineered Energy Materials, an Energy Frontier Research Center

    Energy Technology Data Exchange (ETDEWEB)

    Ozolins, Vidvuds [Univ. of California, Los Angeles, CA (United States). Materials Science and Engineering Dept.

    2016-09-28

    Molecularly Engineered Energy Materials (MEEM) was established as an interdisciplinary cutting-edge UCLA-based research center uniquely equipped to attack the challenge of rationally designing, synthesizing and testing revolutionary new energy materials. Our mission was to achieve transformational improvements in the performance of materials via controlling the nano-and mesoscale structure using selectively designed, earth-abundant, inexpensive molecular building blocks. MEEM has focused on materials that are inherently abundant, can be easily assembled from intelligently designed building blocks (molecules, nanoparticles), and have the potential to deliver transformative economic benefits in comparison with the current crystalline-and polycrystalline-based energy technologies. MEEM addressed basic science issues related to the fundamental mechanisms of carrier generation, energy conversion, as well as transport and storage of charge and mass in tunable, architectonically complex materials. Fundamental understanding of these processes will enable rational design, efficient synthesis and effective deployment of novel three-dimensional material architectures for energy applications. Three interrelated research directions were initially identified where these novel architectures hold great promise for high-reward research: solar energy generation, electrochemical energy storage, and materials for CO2 capture. Of these, the first two remained throughout the project performance period, while carbon capture was been phased out in consultation and with approval from BES program manager.

  6. Surface oxygen exchange properties of bismuth oxide-based solid electrolytes and electrode materials

    NARCIS (Netherlands)

    Boukamp, Bernard A.; Vinke, I.C.; de Vries, K.J.; Burggraaf, A.J.

    1989-01-01

    The surface oxygen exchange coefficient, ks, has been measured for the solid solution (Bi2O3)0.75(Er2O3)0.25 and (Bi2O3)0.6(Tb2O3)0.4 (abbreviated BE25 and BT40), using gas-phase 18O exchange techniques. The activation enth alpy of ks amounts to ΔE=110 kJ/molforBT40 andΔE=130 kJ/molforBE25. The

  7. A roadmap for knowledge exchange and mobilization research in conservation and natural resource management.

    Science.gov (United States)

    Nguyen, Vivian M; Young, Nathan; Cooke, Steven J

    2017-08-01

    Scholars across all disciplines have long been interested in how knowledge moves within and beyond their community of peers. Rapid environmental changes and calls for sustainable management practices mean the best knowledge possible is needed to inform decisions, policies, and practices to protect biodiversity and sustainably manage vulnerable natural resources. Although the conservation literature on knowledge exchange (KE) and knowledge mobilization (KM) has grown in recent years, much of it is based on context-specific case studies. This presents a challenge for learning cumulative lessons from KE and KM research and thus effectively using knowledge in conservation and natural resources management. Although continued research on the gap between knowledge and action is valuable, overarching conceptual frameworks are now needed to enable summaries and comparisons across diverse KE-KM research. We propose a knowledge-action framework that provides a conceptual roadmap for future research and practice in KE/KM with the aim of synthesizing lessons learned from contextual case studies and guiding the development and testing of hypotheses in this domain. Our knowledge-action framework has 3 elements that occur at multiple levels and scales: knowledge production (e.g., academia and government), knowledge mediation (e.g., knowledge networks, actors, relational dimension, and contextual dimension), and knowledge-based action (e.g., instrumental, symbolic, and conceptual). The framework integrates concepts from the sociology of science in particular, and serves as a guide to further comprehensive understanding of knowledge exchange and mobilization in conservation and sustainable natural resource management. © 2016 Society for Conservation Biology.

  8. Materials and Components Technology Division research summary, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    The Materials and Components Technology Division (MCT) provides a research and development capability for the design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs related to nuclear energy support the development of the Integral Fast Reactor (IFR): life extension and accident analyses for light water reactors (LWRs); fuels development for research and test reactors; fusion reactor first-wall and blanket technology; and safe shipment of hazardous materials. MCT Conservation and Renewables programs include major efforts in high-temperature superconductivity, tribology, nondestructive evaluation (NDE), and thermal sciences. Fossil Energy Programs in MCT include materials development, NDE technology, and Instrumentation design. The division also has a complementary instrumentation effort in support of Arms Control Technology. Individual abstracts have been prepared for the database.

  9. Health information exchanges--Unfulfilled promise as a data source for clinical research.

    Science.gov (United States)

    Parker, Carol; Weiner, Michael; Reeves, Mathew

    2016-03-01

    To determine the use of health information exchange organizations (HIEs) to support and conduct clinical research. This scoping review included US-based studies published between January 2003 and March 2014 that used data from an HIE to address at least one of three categories of research: clinical or epidemiological research, financial evaluation, or utilization of health services. Eligibility was not restricted to research on HIEs. Studies with research questions outside of the evaluation of HIEs themselves were sought. Eighteen articles met final study inclusion criteria from an initial list of 847 hits. Fifteen studies addressed a clinical or epidemiological research question, 6 addressed a financial consideration, and 8 addressed a utilization issue. Considerable overlap was found among the research categories: 13 articles addressed more than one category. Of the eighteen included studies, only two used HIE data to answer a research objective that was NOT specific to HIE use. Research designs were varied and ranged from observational studies, such as cohort and cross-sectional studies, to randomized trials. The 18 articles represent the involvement of a small number of HIEs; 7 of the studies were from a single HIE. This review demonstrates that HIE-provided information is available and used to answer clinical or epidemiological, financial, or utilization-based research questions; however, the majority of the studies using HIE data are done with the primary goal of evaluating the use and impact of HIEs on health care delivery and outcomes. As HIEs mature and become integrated parts of the health care industry, the authors anticipate that fewer studies will be published that describe or validate the role of HIEs, and more will use HIEs as multi-institutional data sources for conducting clinical research and improving health services and clinical outcomes. Articles identified in this review indicate the limited extent that HIE data are being used for clinical

  10. Research Note: Inside an Indonesian Online Library for Radical Materials

    Directory of Open Access Journals (Sweden)

    Muhammad Haniff Hassan

    2012-12-01

    Full Text Available This Research Note provides a review of an Indonesian online library for radical materials. The objective of this review is to compile data and information that will contribute to the understanding of the online radicalisation phenomenon as well as the extremists themselves. Based on data found on the online library, this Research Note reports findings on the influence of Al-Maqdisi’s website; the emphasis on translation work of Arabic materials to Indonesian language by radicals and the value of Arabic materials to them. It also covers influential thinkers and ideologues and the use of the Wikipedia modus operandi to hasten the development of the website and effect mobilisation and recruitment, among others things. Based on the data found, this Research Note concludes that ideas matter to radicals.

  11. Determination of Specific Heat Capacity on Composite Shape-Stabilized Phase Change Materials and Asphalt Mixtures by Heat Exchange System.

    Science.gov (United States)

    Ma, Biao; Zhou, Xue-Yan; Liu, Jiang; You, Zhanping; Wei, Kun; Huang, Xiao-Feng

    2016-05-19

    Previous research has shown that composite shape-stabilized phase change material (CPCM) has a remarkable capacity for thermal storage and stabilization, and it can be directly applied to highway construction without leakage. However, recent studies on temperature changing behaviors of CPCM and asphalt mixture cannot intuitively reflect the thermoregulation mechanism and efficiency of CPCM on asphalt mixture. The objective of this paper is to determine the specific heat capacity of CPCM and asphalt mixtures mixed with CPCM using the heat exchange system and the data acquisition system. Studies have shown that the temperature-rise curve of 5 °C CPCM has an obvious temperature plateau, while an asphalt mixture mixed with 5 °C CPCM does not; with increasing temperature, the specific heat capacities of both 5 °C CPCM and asphalt mixture first increase and then decrease, while the variation rate of 5 °C CPCM is larger than that of the asphalt mixture, and the maximum specific heat capacity of 5 °C CPCM appears around the initial phase change temperature. It is concluded that the temperature intervals of 5 °C CPCM are -18 °C-7 °C, 7 °C-25 °C and 25 °C-44 °C, respectively, and that of the asphalt mixture are -18 °C~10 °C, -10 °C~5 °C and 5 °C~28 °C. A low dosage of 5 °C CPCM has little influence on the specific heat capacity of asphalt mixture. Finally, the functions of specific heat capacities and temperature for CPCM and asphalt mixture mixed with CPCM were recommended by the sectional regression method.

  12. Materials and Components Technology Division research summary, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base.

  13. NATO Advanced Research Workshop on New Materials for Thermoelectric Applications

    CERN Document Server

    Hewson, Alex

    2013-01-01

    Thermoelectric devices could play an important role in making efficient use of our energy resources but their efficiency would need to be increased for their wide scale application. There is a multidisciplinary search for materials with an enhanced thermoelectric responses for use in such devices. This volume covers the latest ideas and developments in this research field, covering topics ranging from the fabrication and characterization of new materials, particularly those with strong electron correlation, use of nanostructured, layered materials and composites, through to theoretical work to gain a deeper understanding of thermoelectric behavior. It should be a useful guide and stimulus to all working in this very topical field.

  14. High ion-exchange properties of hybrid materials from X-type zeolite and ground glass powder

    Science.gov (United States)

    Taira, Nobuyuki; Yoshida, Kohei

    2017-10-01

    Zeolites are crystalline aluminosilicates with a homogeneous distribution of micropores with a superior cation-exchange capacity. Because they have especially excellent selective exchange properties, a considerable number of studies have been conducted on treating water containing radioisotopes using the zeolites. When using artificial zeolites, they have inferior sinterability; in addition, it is quite hard for them to remove from polluted liquid since these artificial zeolites are principally synthesized as a form of powder, which is a disadvantage. In this study, hybrid materials were prepared from X-type zeolite and waste glass powder. Their ion-removal effect and mechanical strength were investigated. The zeolite and waste glass were ground in an agate mortar in several ratios. 0.5 g of the mixture was pressure-molded into pellets having a diameter of 7 mm. These pellets were slowly heated at the speed of 240°C/h to 700°C and maintained at 700°C for 2 h. The removal rate of Sr2+ ions increased as the amount of X-type zeolite in the hybrid materials increased; the former increased up to 100% when the content of latter exceeded 50%. The mechanical strength increased by increasing the amount of glass in the hybrid materials. This is attributed to the fact that the glass powder acts as a binder that improves the densification and consequently the mechanical strength of the hybrid materials.

  15. Ground-Based Research within NASA's Materials Science Program

    Science.gov (United States)

    Gillies, Donald C.; Curreri, Peter (Technical Monitor)

    2002-01-01

    Ground-based research in Materials Science for NASA's Microgravity program serves several purposes, and includes approximately four Principal Investigators for every one in the flight program. While exact classification is difficult. the ground program falls roughly into the following categories: (1) Intellectual Underpinning of the Flight Program - Theoretical Studies; (2) Intellectual Underpinning of the Flight Program - Bringing to Maturity New Research; (3) Intellectual Underpinning of the Flight Program - Enabling Characterization; (4) Intellectual Underpinning of the Flight Program - Thermophysical Property Determination; (5) Radiation Shielding; (6) Preliminary In Situ Resource Utilization; (7) Biomaterials; (8) Nanostructured Materials; (9) Materials Science for Advanced Space Propulsion. It must be noted that while the first four categories are aimed at using long duration low gravity conditions, the other categories pertain more to more recent NASA initiatives in materials science. These new initiatives address NASA's future materials science needs in the realms of crew health and safety, and exploration, and have been included in the most recent NASA Research Announcements (NRA). A description of each of these nine categories will be given together with examples of the kinds of research being undertaken.

  16. Research management peer exchange hosted by the Oregon Department of Transportation Research Group, August 20-24, 2001. Summary report.

    Science.gov (United States)

    2001-05-01

    The team began this peer exchange with a review of the first Oregon Peer Exchange conducted in may, 1998. The review included a summary of recommendations made and the changes made as a result of the 1998 Peer Exchange Report. : The primary focus of ...

  17. Metal foam - a material for heat engineering. Porous structures increase the efficiency of heat exchangers and cooling elements; Metallschaum - ein Werkstoff fuer die Waermetechnik. Offenporige Strukturen steigern die Effizienz von Waermeuebertragern und Kuehlelementen

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Franz

    2016-11-01

    Metal foams are increasingly developing into materials with diverse uses. While metal foams with closed pores have already become established as rigid and strong lightweight materials, the open-cell variant is suitable for thermal engineering applications. Until now, the material has been rarely used in heat exchangers or coolers because the production is expensive and its application little tested. Researchers at the Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM in Dresden now want to change this. Together with industry partners, they are further developing the production method, are characterising different metal foams and are testing them in practice.

  18. A New Adsorbent Composite Material Based on Metal Fiber Technology and Its Application in Adsorption Heat Exchangers

    Directory of Open Access Journals (Sweden)

    Ursula Wittstadt

    2015-08-01

    Full Text Available In order to achieve process intensification for adsorption chillers and heat pumps, a new composite material was developed based on sintered aluminum fibers from a melt-extraction process and a dense layer of silico-aluminophosphate (SAPO-34 on the fiber surfaces. The SAPO-34 layer was obtained through a partial support transformation (PST process. Preparation of a composite sample is described and its characteristic pore size distribution and heat conductivity are presented. Water adsorption data obtained under conditions of a large pressure jump are given. In the next step, preparation of the composite was scaled up to larger samples which were fixed on a small adsorption heat exchanger. Adsorption measurements on this heat exchanger element that confirm the achieved process intensification are presented. The specific cooling power for the adsorption step per volume of composite is found to exceed 500 kW/m3 under specified conditions.

  19. Indiana Department of Transportation research program peer exchange, June 17-20, 2002.

    Science.gov (United States)

    2002-06-01

    This report summarizes the outcomes of a Peer Exchange conducted at : the request of the Indiana Department of Transportation (INDOT) on June 17-20, 2002. Peer : exchanges are required of State Departments of Transportation as a condition of receipt ...

  20. Nuclear materials testing in the loops of the NRU research reactor using material test bundles

    Energy Technology Data Exchange (ETDEWEB)

    Leung, T.C.; Walters, L. [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada)

    2014-07-01

    The NRU research reactor has been used to obtain data to understand and quantify the effects of irradiation on nuclear reactor components through their in-service lives and to develop improved designs and components. Apart from the Mark-4 and Mark-7 fast neutron rod material testing facilities in NRU, the high-pressure/high-temperature experimental loops provide an environment similar to the CANDU reactor core, where test materials are subjected to simulated power reactor conditions. Nuclear materials are tested in the loops using Material Test Bundles (MTB). This paper describes how the MTB is designed to operate in the NRU loops. It also describes the physics calculation of the 89-energy-group neutron spectrum in the MTB and its comparison with the spectrum in CANDU power reactors. The predictions of spectral effects on nuclear material behaviour, such as material damage and helium generation are summarized. (author)

  1. Is there a future for material fatigue research?

    Energy Technology Data Exchange (ETDEWEB)

    Joosse, P. [Stork Product Engineering b.v., Amsterdam (Netherlands); Bulder, B. [ECN-Renewable Energy, Petten (Netherlands)

    1996-09-01

    Due to the fact that it is quite difficult to get new funding for (fundamental) wind turbine material related fatigue research the authors started a discussion with the following title: Are there still wind turbine engineering specific fatigue problems? and What are the research goals for the fatigue experts in wind engineering for the second half of the 90{sup ies}. In this paper the present status of the fatigue issue and the discussion following is reported. (au)

  2. Factors affecting the exchange of genetic material between Nordic and US Holstein populatons

    DEFF Research Database (Denmark)

    Buch, L H; Sørensen, A C; Lassen, J

    2009-01-01

    be explained by differences in economic values, trait definitions, national genetic evaluation procedures, and genotype x environment interactions. The objective of this study was to test whether uniform definitions of the female fertility traits would increase the exchange of genes across populations......, and to quantify the effect on genetic gain. A second objective was to test whether a more similar relative weighting of the index traits across populations would increase the exchange of genes across populations, and to quantify the effect on genetic gain. This was done in a stochastic simulation study...... of the Nordic and US Holstein populations. Uniform definitions of the female fertility traits did not increase total genetic gain in the Nordic Holstein population. The standardization did not seem to affect selection across populations either. However, the results were sensitive to the assumptions made...

  3. Development and Exchange of Instructional Resources in Water Quality Control Programs, II: Instructional Materials Available.

    Science.gov (United States)

    Austin, John H.

    This document is one in a series of reports which reviews instructional materials and equipment for water and wastewater treatment plant personnel. Approximately 900 items are listed in this document along with guidelines for the production of instructional materials. Information is provided regarding the source, type of material, intended…

  4. Bifunctional thermoelectric tube made of tilted multilayer material as an alternative to standard heat exchangers.

    Science.gov (United States)

    Takahashi, Kouhei; Kanno, Tsutomu; Sakai, Akihiro; Tamaki, Hiromasa; Kusada, Hideo; Yamada, Yuka

    2013-01-01

    Enormously large amount of heat produced by human activities is now mostly wasted into the environment without use. To realize a sustainable society, it is important to develop practical solutions for waste heat recovery. Here, we demonstrate that a tubular thermoelectric device made of tilted multilayer of Bi(0.5)Sb(1.5)Te3/Ni provides a promising solution. The Bi(0.5)Sb(1.5)Te3/Ni tube allows tightly sealed fluid flow inside itself, and operates in analogy with the standard shell and tube heat exchanger. We show that it achieves perfect balance between efficient heat exchange and high-power generation with a heat transfer coefficient of 4.0 kW/m(2)K and a volume power density of 10 kW/m(3) using low-grade heat sources below 100°C. The Bi(0.5)Sb(1.5)Te3/Ni tube thus serves as a power generator and a heat exchanger within a single unit, which is advantageous for developing new cogeneration systems in factories, vessels, and automobiles where cooling of excess heat is routinely carried out.

  5. Charge density research: from inorganic and molecular materials to proteins

    OpenAIRE

    Lecomte, Claude; Aubert, Emmanuel; Legrand, Vincent; Porcher, Florence; Pillet, Sébastien; Guillot, Benoît; Jelsch, Christian

    2005-01-01

    International audience; This paper intends to present applications of experimental charge density research in physics, chemistry and biology. It describes briefly most methods for modelling the charge density and calculating and analyzing derived properties (electrostatic potential, topological properties). These methods are illustrated through examples ranging from material science and coordination chemistry to biocrystallography, like the estimation of electrostatic energy in a zeolite-like...

  6. Mathematical research in materials science: opportunities and perspectives

    National Research Council Canada - National Science Library

    National Research Council Staff

    1993-01-01

    ... Applied to Materials Science Board on Mathematical Sciences Commission on Physical Sciences, Mathematics, and Applications National Research Council National Academy Press Washington, D.C. 1993 i Copyrighttrue Please breaks inserted. are Page files. accidentally typesetting been have may original from the errors not typographic original retai...

  7. Needle Exchange and the HIV Epidemic in Vancouver: Lessons Learned from 15 years of research

    Science.gov (United States)

    Hyshka, Elaine; Strathdee, Steffanie; Wood, Evan; Kerr, Thomas

    2012-01-01

    During the mid-1990s, Vancouver experienced a well characterized HIV outbreak among injection drug users (IDU) and many questioned how this could occur in the presence of a high volume needle exchange program (NEP). Specific concerns were fuelled by early research demonstrating that frequent needle exchange program attendees were more likely to be HIV positive than those who attended the NEP less frequently. Since then, some have misinterpreted this finding as evidence that NEPs are ineffective or potentially harmful. In light of continuing questions about the Vancouver HIV epidemic, we review 15 years of peer-reviewed research on Vancouver’s NEP to describe what has been learned through this work. Our review demonstrates that: 1) NEP attendance is not causally associated with HIV infection, 2) frequent attendees of Vancouver’s NEP have higher risk profiles which explain their increased risk of HIV seroconversion, and 3) a number of policy concerns, as well as the high prevalence of cocaine injecting contributed to the failure of the NEP to prevent the outbreak. Additionally, we highlight several improvements to Vancouver’s NEP that contributed to declines in syringe sharing and HIV incidence. Vancouver’s experience provides a number of important lessons regarding NEP. Keys to success include refocusing the NEP away from an emphasis on public order objectives by separating distribution and collection functions, removing syringe distribution limits and decentralizing and diversifying NEP services. Additionally, our review highlights the importance of context when implementing NEPs, as well as ongoing evaluation to identify factors that constrain or improve access to sterile syringes. PMID:22579215

  8. RECENT CONTRIBUTIONS OF THE STATISTICAL PHYSICS IN THE RESEARCH OF BANKING, STOCK EXCHANGE AND FOREIGN EXCHANGE MARKETS

    Directory of Open Access Journals (Sweden)

    PIRVU DANIELA

    2016-04-01

    Full Text Available This paper proposes a framework for exploring the main research approaches of the financial markets, conducted in the past years by statistical physics specialists. It, also, presents the global financial developments in the last few years, as well as a review of the most important steps in the development of the physical and mathematical modelling of the socioeconomic phenomena. In this regard, we analysed research findings published in the notable international journals. Our research demonstrated that the econophysical models developed in the past few years for the description of the financial phenomena and processes do not provide satisfactory results for the construction of complete solutions able to answer the nowadays financial challenges. We believe that research instrumentation of statistical physics has developed significantly lately and the research approaches in this field should continue and should be enhanced.

  9. Casting materials and their application in research and teaching.

    Science.gov (United States)

    Haenssgen, Kati; Makanya, Andrew N; Djonov, Valentin

    2014-04-01

    From a biological point of view, casting refers to filling of anatomical and/or pathological spaces with extraneous material that reproduces a three-dimensional replica of the space. Casting may be accompanied by additional procedures such as corrosion, in which the soft tissue is digested out, leaving a clean cast, or the material may be mixed with radiopaque substances to allow x-ray photography or micro computed topography (µCT) scanning. Alternatively, clearing of the surrounding soft tissue increases transparency and allows visualization of the casted cavities. Combination of casting with tissue fixation allows anatomical dissection and didactic surgical procedures on the tissue. Casting materials fall into three categories namely, aqueous substances (India ink, Prussian blue ink), pliable materials (gelatins, latex, and silicone rubber), or hard materials (methyl methacrylates, polyurethanes, polyesters, and epoxy resins). Casting has proved invaluable in both teaching and research and many phenomenal biological processes have been discovered through casting. The choice of a particular material depends inter alia on the targeted use and the intended subsequent investigative procedures, such as dissection, microscopy, or µCT. The casting material needs to be pliable where anatomical and surgical manipulations are intended, and capillary-passable for ultrastructural investigations.

  10. TuBaFrost 3: regulatory and ethical issues on the exchange of residual tissue for research across Europe

    NARCIS (Netherlands)

    van Veen, E.-B.; Riegman, P. H. J.; Dinjens, W. N. M.; Lam, K. H.; Oomen, M. H. A.; Spatz, A.; Mager, R.; Ratcliffe, C.; Knox, K.; Kerr, D.; van Damme, B.; van de Vijver, M.; van Boven, H.; Morente, M. M.; Alonso, S.; Kerjaschki, D.; Pammer, J.; Lopez-Guerrero, J. A.; Llombart Bosch, A.; Carbone, A.; Gloghini, A.; Teodorovic, I.; Isabelle, M.; Passioukov, A.; Lejeune, S.; Therasse, P.; Oosterhuis, J. W.

    2006-01-01

    The regulatory regimes for research with residual tissue and accompanying data differ widely between countries in the European Union (EU): from specific consent to opt-out or even no consent at all. This could greatly hamper research where the exchange of tissue and accompanying data has become the

  11. General principles of researching the lexicon of traditional material culture

    Directory of Open Access Journals (Sweden)

    Nedeljkov Ljiljana

    2009-01-01

    Full Text Available The paper discusses a linguistic research of terminological systems connected with basic fields of human life and work which, in modern conditions, are either transformed into contemporary modern forms or gradually disappear due to changes in the way of life and work. The lexicon of material culture of native inhabitants of Vojvodina is examined, resulting in monographs on the terminologies of fishing, cartwrighting, shepherding and houses and furniture, all of which have in common the fact that the starting point was the research of the lexicon in question by semantic fields. The paper shows the lexicological and lexicographical procedures used while researching these terminological systems.

  12. Relation between electrical percolation and rate constant for exchange of material between droplets in water in oil microemulsions

    Energy Technology Data Exchange (ETDEWEB)

    Jada, A.; Lang, J.; Zana, R. (Institut Charles Sadron, Strasbourg (France))

    1989-01-12

    The rate constant k{sub e} associated with the exchange of material upon collisions between droplets in ternary water in oil microemulsions stabilized by ionic surfactants has been determined by a time-resolved fluorescence method. The electrical conductivity of the same systems has been investigated. It appears that percolative conduction occurs only in systems where k{sub e} is larger than (1-2) {times} 10{sup 9} M{sup {minus}1} s{sup {minus}1}. This result supports the hypothesis that above percolation threshold the conductivity is mainly due to the motion of counterions through water channels or fusion between droplets in droplet clusters.

  13. Material Transfer Agreement (MTA) | FNLCR Staging

    Science.gov (United States)

    Material Transfer Agreements are appropriate for exchange of materials into or out of the Frederick National Labfor research or testing purposes, with no collaborative research by parties involving the materials.

  14. PENERAPAN MODEL PEMBELAJARAN ROTATING TRIO EXCHANGE (RTE UNTUK MENINGKATKAN KUALITAS PEMBELAJARAN MATERI UPAYA-UPAYA PENEGAKAN HAM DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Hasti Anggraini

    2017-03-01

    Full Text Available The purpose of this research is to improve the quality of learning through the application of the Rotating Trio Exchange (RTE model on the Material of Human Rights Enforcement in Indonesia. The study wasconducted in X IPA 4 and X IPA 8 graders of SMA Negeri 1 Pati Academic Year 2014 / 2015. The characteristic of students in both classes is balanced in terms of the dynamics of the activity and the value of learning outcomes that all have passed the learning mastery (100% passed.Implementation of the actions carried out in three cycles (cycle I, II, and III, each cycle lasts for 135 minutes (3 x 45 minutes. The design of Class Action Research uses the models of Kemmis and Taggart (1988 whose implementation consists of four steps: (1 planning; (2 implementation; (3 observation; and (4 reflection.The results of the implementation on the first cycle is not in line with expectations, as one indicator of the knowledge domains and one indicator of the skill domains shows a lower value or not balanced with other indicators. The average classical learning mastery in this cycle is above the passing grade (80. TQM indicators of these two classes is balanced, that is 684 for X IPA 4 and 679 for X IPA 8. The mean of TQM cognitive formation of both classes is 24.87%, skills is 49.081, and attitudes is 26.049%. In the second cycle, an improvement is carried out in the discourse of knowledge and skills of 7.8. This is influenced by the dynamics of student involvement equalization model which is evenly and alternately. In the third cycle, the two classes showed a different increase in quality, class X IPA 8 showed positive improvement, while Class X IPA 4 shows a fluctuative increase. The increase is relatively small, nevertheless indicates a significant RTE models to improve the quality of classical learning. The use of appropriate learning models is one of the factors that teachers can do to improve the quality of learning that is shown by the increase in

  15. The role of material evidence in architectural research

    DEFF Research Database (Denmark)

    2011-01-01

    of knowledges that inform architectural thinking. Architectural reflection is allied with it media. It is through the drawing, the model and the built that architecture is conceived and developed. In practice based research working through design means reflecting through the production of material evidence......The following texts explore the production of knowledge in architectural research. Focussing on a wide definition of practice led research, the aim for these texts is to discuss how the practices of architectural design; drawing, modelling, prototyping and building embody a particular set...... in its various forms. Our query is to explore how the material evidence resulting of these practices come to contain knowledge - how are they produced, what knowledge do they embody, what are their intersections and by what means and methods can they be evaluated? The texts assembled here...

  16. A Microwave Thermostatic Reactor for Processing Liquid Materials Based on a Heat-Exchanger.

    Science.gov (United States)

    Zhou, Yongqiang; Zhang, Chun; Xie, Tian; Hong, Tao; Zhu, Huacheng; Yang, Yang; Liu, Changjun; Huang, Kama

    2017-10-08

    Microwaves have been widely used in the treatment of different materials. However, the existing adjustable power thermostatic reactors cannot be used to analyze materials characteristics under microwave effects. In this paper, a microwave thermostatic chemical reactor for processing liquid materials is proposed, by controlling the velocity of coolant based on PLC (programmable logic controller) in different liquid under different constant electric field intensity. A nonpolar coolant (Polydimethylsiloxane), which is completely microwave transparent, is employed to cool the liquid materials. Experiments are performed to measure the liquid temperature using optical fibers, the results show that the precision of temperature control is at the range of ±0.5 °C. Compared with the adjustable power thermostatic control system, the effect of electric field changes on material properties are avoided and it also can be used to detect the properties of liquid materials and special microwave effects.

  17. Academic Entrepreneurship and Exchange of Scientific Resources: Material Transfer in Life and Materials Sciences in Japanese Universities

    Science.gov (United States)

    Shibayama, Sotaro; Walsh, John P.; Baba, Yasunori

    2012-01-01

    This study uses a sample of Japanese university scientists in life and materials sciences to examine how academic entrepreneurship has affected the norms and behaviors of academic scientists regarding sharing scientific resources. Results indicate that high levels of academic entrepreneurship in a scientific field are associated with less reliance…

  18. Polymer materials basic research needs for energy applications

    Energy Technology Data Exchange (ETDEWEB)

    Macknight, W.J.; Baer, E.; Nelson, R.D. (eds.)

    1978-08-01

    The larger field covered in the workshop consists of (1) synthesis and characterization, (2) physical chemistry, (3) physics, and (4) engineering. Polymeric materials are properly regarded as new materials in their own right, not as replacements for existing materials. As such they need to be studied to understand the properties which are unique to them by virtue of their particular molecular structures. Technological applications will rationally follow from such studies. It is the objective of this report to point out basic research needs in polymer materials related to energy. The development of sophisticated instrumentation makes the task of molecular characterization possible on a level hitherto unattainable. Many of these instruments because of their size and complexity must of necessity be located at the DOE National Laboratories. The importance of personnel trained in the polymer field located at these facilities is emphasized. In the past there has been relatively little concerted polymer research within the energy community. This report attempts to describe the present situation and point out some needs and future research directions. (GHT)

  19. High temperature corrosion of advanced ceramic materials for hot gas filters. Topical report for part 1 of high temperature corrosion of advanced ceramic materials for hot gas filters and heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Spear, K.E.; Crossland, C.E.; Shelleman, D.L.; Tressler, R.E. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Materials Science and Engineering

    1997-12-11

    This program consists of two separate research areas. Part 1, for which this report is written, studied the high temperature corrosion of advanced ceramic hot gas filters, while Part 2 studied the long-term durability of ceramic heat exchangers to coal combustion environments. The objectives of Part 1 were to select two candidate ceramic filter materials for flow-through hot corrosion studies and subsequent corrosion and mechanical properties characterization. In addition, a thermodynamic database was developed so that thermochemical modeling studies could be performed to simulate operating conditions of laboratory reactors and existing coal combustion power plants, and to predict the reactions of new filter materials with coal combustion environments. The latter would make it possible to gain insight into problems that could develop during actual operation of filters in coal combustion power plants so that potential problems could be addressed before they arise.

  20. Synthesis of Highly Sulfonated Poly(arylene ether Containing Multiphenyl for Proton Exchange Membrane Materials

    Directory of Open Access Journals (Sweden)

    Yi-Chiang Huang

    2016-01-01

    Full Text Available A series of sterically hindered, sulfonated, poly(arylene ether polymers were synthesized by nucleophilic polycondensation reaction using 4,4′′′′-difluoro-3,3′′′′-bistrifluoromethyl-2′′,3′′,5′′,6′′-tetraphenyl-[1,1′;4′,1′′;4′′,1′′′;4′′′,1′′′′]-pentaphenyl and 4,4′-biphenol and were prepared through postpolymerization sulfonation. The chemical structures were confirmed by 1H NMR. Subsequent to sulfonation, solvent-casting membranes were provided ion exchange capacity (IEC values ranging from 0.39 to 2.90 mmol/g. Proton conductivities of membranes ranged from 143 to 228 mS/cm at 80°C under fully humidified conditions which were higher than that of Nafion 117. The membrane also exhibited considerably dimension stability, oxidative stability, and hydrolytic stability. The microphase structure was investigated by transmission electron microscopy (TEM and the ionic aggregation of sulfonic acid groups exhibited spherical ionic clusters with well-developed phase separated morphology. The results indicated that the membranes are promising candidates for application as proton exchange membranes. This investigation demonstrates introducing multiphenylated moieties to create a high free volume polymer that provides dimensionally stable and high proton conductivity membranes.

  1. Concurrent studies of enhanced heat transfer and materials for ocean thermal exchangers. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bonewitz, R.A.

    1976-10-29

    Aluminum alloys 1100, 3003, 5052, and 6063 were examined for their compatibility with the proposed working fluids for Ocean Thermal Energy Conversion (OTEC), anhydrous ammonia, Freon 22 and propane, and mixtures of these with sea water. Such mixtures would occur if leaks develop in evaporator or condenser heat exchangers. These aluminum alloys are compatible with the anhydrous working fluids. In ammonia-sea water solutions only limited general corrosion is found in 0 to 30 percent ammonia, no corrosion in 30 to 90 percent ammonia, and ''self limiting'' pits in 90 to 100 percent ammonia so rapid deterioration of the exchangers would not occur. No corrosion was observed in sea water saturated with Freon 22 or propane. No differences in alloy performance were evident in any of these tests so selection can be made on the basis of compatibility with sea water. A review of the available literature indicates that 5052 shows the best performance in surface sea water followed by 1100, 3003 and then 6063 alloy. In deep sea water only 5052 and 1100 alloys appear suitable although more data is required. In both surface and deep sea waters, alcladding offers the best protection against tube perforation; few instances of penetration into the core alloy have been observed for the alclad alloys examined in this study.

  2. 78 FR 5505 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2013-01-25

    ...: Name: Site Visit review of the Materials Research Science and Engineering Center (MRSEC) at Yale..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065... technical information; financial data, such as salaries and personal information concerning individuals...

  3. 77 FR 25503 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-04-30

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room... nature, including technical information; financial data, such as salaries and personal information...

  4. Research of the convective heat exchange of relatively long cyclone chamber with use gradient heat flux sensors

    Science.gov (United States)

    Onokhin, D. A.; Saburov, E. N.; Orekhov, A. N.

    2017-11-01

    The aim of study is research of features of convective heat transfer in relatively long cyclone chamber. The research of heat exchange was carried out in a wide range of Reynolds numbers using gradient heat flow sensors. In the experiments, the value of the entrance area was changed by the flow and the diameter of the outlet. The results obtained were presented in the form of similarity equation. It was proposed to use the possibilities of gradient thermometry for studying the processes of heat exchange in cyclone chambers.

  5. Interactive Data Visualization for HIV Cohorts: Leveraging Data Exchange Standards to Share and Reuse Research Tools.

    Directory of Open Access Journals (Sweden)

    Meridith Blevins

    Full Text Available To develop and disseminate tools for interactive visualization of HIV cohort data.If a picture is worth a thousand words, then an interactive video, composed of a long string of pictures, can produce an even richer presentation of HIV population dynamics. We developed an HIV cohort data visualization tool using open-source software (R statistical language. The tool requires that the data structure conform to the HIV Cohort Data Exchange Protocol (HICDEP, and our implementation utilized Caribbean, Central and South America network (CCASAnet data.This tool currently presents patient-level data in three classes of plots: (1 Longitudinal plots showing changes in measurements viewed alongside event probability curves allowing for simultaneous inspection of outcomes by relevant patient classes. (2 Bubble plots showing changes in indicators over time allowing for observation of group level dynamics. (3 Heat maps of levels of indicators changing over time allowing for observation of spatial-temporal dynamics. Examples of each class of plot are given using CCASAnet data investigating trends in CD4 count and AIDS at antiretroviral therapy (ART initiation, CD4 trajectories after ART initiation, and mortality.We invite researchers interested in this data visualization effort to use these tools and to suggest new classes of data visualization. We aim to contribute additional shareable tools in the spirit of open scientific collaboration and hope that these tools further the participation in open data standards like HICDEP by the HIV research community.

  6. Sodium fast reactor fuels and materials : research needs.

    Energy Technology Data Exchange (ETDEWEB)

    Denman, Matthew R.; Porter, Douglas (Idaho National Laboratory, Idaho Falls, ID); Wright, Art (Argonne National Laboratory Argonne, IL); Lambert, John (Argonne National Laboratory Argonne, IL); Hayes, Steven (Idaho National Laboratory, Idaho Falls, ID); Natesan, Ken (Argonne National Laboratory Argonne, IL); Ott, Larry J. (Oak Ridge National Laboratory, Oak Ridge, TN); Garner, Frank (Radiation Effects Consulting. Richland, WA); Walters, Leon (Advanced Reactor Concepts, Idaho Falls, ID); Yacout, Abdellatif (Argonne National Laboratory Argonne, IL)

    2011-09-01

    An expert panel was assembled to identify gaps in fuels and materials research prior to licensing sodium cooled fast reactor (SFR) design. The expert panel considered both metal and oxide fuels, various cladding and duct materials, structural materials, fuel performance codes, fabrication capability and records, and transient behavior of fuel types. A methodology was developed to rate the relative importance of phenomena and properties both as to importance to a regulatory body and the maturity of the technology base. The technology base for fuels and cladding was divided into three regimes: information of high maturity under conservative operating conditions, information of low maturity under more aggressive operating conditions, and future design expectations where meager data exist.

  7. Rethinking Socialization Research through the Lens of New Materialism

    Directory of Open Access Journals (Sweden)

    Grit Höppner

    2017-09-01

    Full Text Available In recent decades, socialization research appears to have suffered the loss of its former capacity to explain the processes of becoming a socialized subject in a social environment. In this article, I review socialization theories taking into account assumptions regarding human subjects and their social environments. I confront them with the idea of rethinking dualisms, ontologies, and agencies addressed by the field of new materialism. I propose a new materialist-inspired socialization theory that assumes that humans, knowledge, and material environments become inseparable parts of (gendered socialization processes in a world of constant change. This approach contributes to socialization theory and methodology because it illustrates precisely how humans and non-humans coproduce socialization in situated material-discursive processes.

  8. Research in materials processing using a low gravity simulation aircraft

    Science.gov (United States)

    Owen, Robert B.

    1987-01-01

    The feasibility of performing materials experiments aboard the NASA KC-135 low gravity simulation aircraft is demonstrated. The vehicle serves as a research platform which flies parabolic maneuvers. Experiments which have been conducted on board the aircraft are outlined and particular attention is given to tests utilizing optical measurement techniques such as interferometry, schlieren, and holography. It is noted that the KC-135 can be used for crew training, flight hardware checkout, conceptual development, self-sufficient experiments, and research in support of and leading to space flight experiments.

  9. Micro-exchangers. Final report: integrated research project: 8.2; Micro-echangeurs. Rapport final: Projet de recherche integree: 8.2

    Energy Technology Data Exchange (ETDEWEB)

    Lallemand, M. [Institut National des Sciences Appliquees (INSA), Centre de Thermique de Lyon (CETHIL), UMR 5008, 69 - Villeurbanne (France); Ayela, F. [Centre de Recherches sur les tres Basses Temperatures (CRTBT), UPR 5001, 38 - Grenoble (France); Tadrist, L. [Institut Universitaire des Systemes Thermiques Industriels (IUSTI/EPUM) - UMR 6595, 13 - Marseille (France); Favre-Marinet, M.; Marty, P. [Institut National Polytechnique, Lab. des Ecoulements Geophysiques et Industriels (LEGI), UMR 5519, 38 - Grenoble (France); Lebouche, M.; Maillet, D. [Ecole Nationale Superieure en Electricite et Mecanique (ENSEM), Lab. d' Energetique et de Mecanique Theorique et Appliquee (LEMTA), UMR 7563, 54 - Nancy (France); Peerhossaini, H. [Ecole polytechnique de l' Universite de Nantes (UPUN) Lab. de Thermocinetique, (LT), UMR 6607, 44 - Nantes (France); Gruss, A. [CEA Grenoble, Groupement pour la Recherche sur les Echangeurs Thermiques (GRETH), 38 (France)

    2004-07-01

    This project concerns the design and the development of efficient exchangers, in the monophasic and two-phase exchangers domain. It provides the results and the analysis of research programs on the following topics: hydrodynamic and transfers in micro channels in monophasic convection; boiling study in microchannels; micro-exchangers. (A.L.B.)

  10. Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research

    Science.gov (United States)

    Jacobs, James A.

    2003-01-01

    The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website and 2) using the National Educators Workshop: Update in Engineering Materials, Science and Technology (NEW:Updates). We have also participated in a number of national projects, presented talks at technical meetings and published articles aimed at improving k-12 technical education. Through the three years of this project the NSU team developed the successful MST-Online site and continued to upgrade and update it as our limited resources permitted. Three annual NEW:Updates conducted from 2000 though 2002 overcame the challenges presented first by the September 11,2001 terrorist attacks and the slow U.S. economy and still managed to conduct very effective workshops and expand our outreach efforts. Plans began on NEW:Update 2003 to be hosted by NASA Langley as a part of the celebration of the Centennial of Controlled Flight.

  11. Applied solid state science advances in materials and device research

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 1 presents articles about junction electroluminescence; metal-insulator-semiconductor (MIS) physics; ion implantation in semiconductors; and electron transport through insulating thin films. The book describes the basic physics of carrier injection; energy transfer and recombination mechanisms; state of the art efficiencies; and future prospects for light emitting diodes. The text then discusses solid state spectroscopy, which is the pair spectra observed in gallium phosphide photoluminescence. The extensive studies

  12. Electrocatalysts and their Supporting Materials for Proton Exchange Membrane Fuel Cells: Activity and Durability Studies

    DEFF Research Database (Denmark)

    Permyakova, Anastasia Aleksandrovna

    This thesis describes investigations conducted exploring the activity, stability and durability of supported nano-particulate, bulk and thin film electrocatalysts used in proton exchange membrane fuel cells (PEMFCs). The effects of different factors and conditions on the reactions involved...... in oxygen reduction, carbon monoxide and methanol electro-oxidation reactions were explored. Employed catalysts were characterized electrochemically and physiochemically using techniques such as: cyclic voltammetry, rotating disk electrode technique, SEM, TEM, EDS, XPS, TGA/DTA, Raman, XRD, FTIR-IR among...... other methods. The thesis begins with an introduction in Chapter 1 providing an overview of fuel cells, their associated reaction mechanisms, catalysts and catalysts supports. Chapter 2 presents the theoretical background to the study including equipment and the techniques used to analyse the catalysts...

  13. Neuromorphic Computing – From Materials Research to Systems Architecture Roundtable

    Energy Technology Data Exchange (ETDEWEB)

    Schuller, Ivan K. [Univ. of California, San Diego, CA (United States); Stevens, Rick [Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Chicago, IL (United States); Pino, Robinson [Dept. of Energy (DOE) Office of Science, Washington, DC (United States); Pechan, Michael [Dept. of Energy (DOE) Office of Science, Washington, DC (United States)

    2015-10-29

    Computation in its many forms is the engine that fuels our modern civilization. Modern computation—based on the von Neumann architecture—has allowed, until now, the development of continuous improvements, as predicted by Moore’s law. However, computation using current architectures and materials will inevitably—within the next 10 years—reach a limit because of fundamental scientific reasons. DOE convened a roundtable of experts in neuromorphic computing systems, materials science, and computer science in Washington on October 29-30, 2015 to address the following basic questions: Can brain-like (“neuromorphic”) computing devices based on new material concepts and systems be developed to dramatically outperform conventional CMOS based technology? If so, what are the basic research challenges for materials sicence and computing? The overarching answer that emerged was: The development of novel functional materials and devices incorporated into unique architectures will allow a revolutionary technological leap toward the implementation of a fully “neuromorphic” computer. To address this challenge, the following issues were considered: The main differences between neuromorphic and conventional computing as related to: signaling models, timing/clock, non-volatile memory, architecture, fault tolerance, integrated memory and compute, noise tolerance, analog vs. digital, and in situ learning New neuromorphic architectures needed to: produce lower energy consumption, potential novel nanostructured materials, and enhanced computation Device and materials properties needed to implement functions such as: hysteresis, stability, and fault tolerance Comparisons of different implementations: spin torque, memristors, resistive switching, phase change, and optical schemes for enhanced breakthroughs in performance, cost, fault tolerance, and/or manufacturability.

  14. The Materials Data Facility: Data services to advance materials science research

    Energy Technology Data Exchange (ETDEWEB)

    Blaiszik, B.; Chard, K.; Pruyne, J.; Ananthakrishnan, R.; Tuecke, S.; Foster, I.

    2016-08-01

    With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloudhosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific)and automatically-extractedmetadata in a registrywhile the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. TheMDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of thirdparty publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF’s design, current status, and future plans.

  15. The Materials Data Facility: Data Services to Advance Materials Science Research

    Science.gov (United States)

    Blaiszik, B.; Chard, K.; Pruyne, J.; Ananthakrishnan, R.; Tuecke, S.; Foster, I.

    2016-08-01

    With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloud-hosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific) and automatically-extracted metadata in a registry while the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. The MDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of third-party publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF's design, current status, and future plans.

  16. Present and Future Automotive Composite Materials Research Efforts at DOE

    Energy Technology Data Exchange (ETDEWEB)

    Warren, C.D.

    1999-07-03

    Automobiles of the future will be forced to travel fi.uther on a tank of fuel while discharging lower levels of pollutants. Currently, the United States uses in excess of 16.4 million barrels of petroleum per day. Sixty-six percent of that petroleum is used in the transportation of people and goods. Automobiles currently account for just under two-thirds of the nation's gasoline consumptio~ and about one-third of the total United States energy usage. [1] By improving transportation related fiel efficiency, the United States can lessen the impact that emissions have on our environment and provide a cleaner environment for fiture generations. In 1992, The Department of Energy's (DOE) Office of Transportation Materials completed a comprehensive program plan entitled, The Lightweight MateriaIs (LWko Multi-Year Program Plan, for the development of technologies aimed at reducing vehicle mass [2]. This plan was followed in 1997 by the more comprehensive Office of Advanced Automotive Technologies research and development plan titled, Energy Eficient Vehicles for a Cleaner Environment [3] which outlines the department's plans for developing more efficient vehicles during the next ~een years. Both plans identi~ potential applications, technology needs, and R&D priorities. The goal of the Lightweight Materials Program is to develop materials and primary processing methods for the fabrication of lighter weight components which can be incorporated into automotive systems. These technologies are intended to reduce vehicle weight, increase fuel efficiency and decrease emissions. The Lightweight Materials program is jointly managed by the Department of Energy(DOE) and the United States Automotive Materials Partnership (USAMP). Composite materiak program work is coordinated by cooperative research efforts between the DOE and the Automotive Composites Consortium (ACC).

  17. Low Gravity Materials Science Research for Space Exploration

    Science.gov (United States)

    Clinton, R. G., Jr.; Semmes, Edmund B.; Schlagheck, Ronald A.; Bassler, Julie A.; Cook, Mary Beth; Wargo, Michael J.; Sanders, Gerald B.; Marzwell, Neville I.

    2004-01-01

    On January 14, 2004, the President of the United States announced a new vision for the United States civil space program. The Administrator of the National Aeronautics and Space Administration (NASA) has the responsibility to implement this new vision. The President also created a Presidential Commission 'to obtain recommendations concerning implementation of the new vision for space exploration.' The President's Commission recognized that achieving the exploration objectives would require significant technical innovation, research, and development in focal areas defined as 'enabling technologies.' Among the 17 enabling technologies identified for initial focus were advanced structures; advanced power and propulsion; closed-loop life support and habitability; extravehicular activity system; autonomous systems and robotics; scientific data collection and analysis; biomedical risk mitigation; and planetary in situ resource utilization. The Commission also recommended realignment of NASA Headquarters organizations to support the vision for space exploration. NASA has aggressively responded in its planning to support the vision for space exploration and with the current considerations of the findings and recommendations from the Presidential Commission. This presentation will examine the transformation and realignment activities to support the vision for space exploration that are underway in the microgravity materials science program. The heritage of the microgravity materials science program, in the context of residence within the organizational structure of the Office of Biological and Physical Research, and thematic and sub-discipline based research content areas, will be briefly examined as the starting point for the ongoing transformation. Overviews of future research directions will be presented and the status of organizational restructuring at NASA Headquarters, with respect to influences on the microgravity materials science program, will be discussed

  18. An investigation into carbon nanostructured materials as catalyst support in proton exchange membrane fuel cells

    DEFF Research Database (Denmark)

    Veltzé, Sune

    black support materials for low platinum containing electrocatalyst. This is partly due to their high electronic conductivity. Partly due to their high surface area needed for the dispersion of nanoparticulate metal-clusters. In addition carbon nano-structures (CNF, SWCNT, MWCNT etc.) are more durable...

  19. Effect of airflow velocity on moisture exchange at surfaces of building materials

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard; Rode, Carsten; Peuhkuri, Ruut Hannele

    2006-01-01

    The moisture transfer between air and construction are affected of the boundary layer conditions close to the surface, which is influenced by the airflow patterns in the room. Therefore an investigation of the relation be-tween the surface resistance and the airflow velocity above a material samp...

  20. Electrokinetic salt removal from porous building materials using ion exchange membranes

    NARCIS (Netherlands)

    Kamran, K.; Van Soestbergen, M.; Pel, L.

    The removal of salt from porous building materials under the influence of an applied voltage gradient normally results in high pH gradients due to the formation of protons and hydroxyl ions at the electrodes. The formed acidic and alkaline regions not only lead to disintegration of the porous

  1. Micro-Scale Experiments and Models for Composite Materials with Materials Research

    DEFF Research Database (Denmark)

    Zike, Sanita

    Numerical models are frequently implemented to study micro-mechanical processes in polymer/fibre composites. To ensure that these models are accurate, the length scale dependent properties of the fibre and polymer matrix have to be taken into account. Most often this is not the case, and material...... properties acquired at macro-scale are used for micro-mechanical models. This is because material properties at the macro-scale are much more available and the test procedures to obtain them are well defined. The aim of this research was to find methods to extract the micro-mechanical properties of the epoxy...... resin used in polymer/fibre composites for wind turbine blades combining experimental, numerical, and analytical approaches. Experimentally, in order to mimic the stress state created by a void in a bulk material, test samples with finite root radii were made and subjected to a double cantilever beam...

  2. NATO Advanced Research Workshop on Molecular Engineering for Advanced Materials

    CERN Document Server

    Schaumburg, Kjeld

    1995-01-01

    An important aspect of molecular engineering is the `property directed' synthesis of large molecules and molecular assemblies. Synthetic expertise has advanced to a state which allows the assembly of supramolecules containing thousands of atoms using a `construction kit' of molecular building blocks. Expansion in the field is driven by the appearance of new building blocks and by an improved understanding of the rules for joining them in the design of nanometer-sized devices. Another aspect is the transition from supramolecules to materials. At present no single molecule (however large) has been demonstrated to function as a device, but this appears to be only a matter of time. In all of this research, which has a strongly multidisciplinary character, both existing and yet to be developed analytical techniques are and will remain indispensable. All this and more is discussed in Molecular Engineering for Advanced Materials, which provides a masterly and up to date summary of one of the most challenging researc...

  3. Electrical research on solar cells and photovoltaic materials

    Science.gov (United States)

    Orehotsky, J.

    1985-01-01

    A systematic study of the properties of various polymer pottant materials and of the electrochemical corrosion mechanisms in solar cell materials is required for advancing the technology of terrestrial photovoltaic modules. The items of specific concern in this sponsored research activity involve: (1) kinetics of plasticizer loss in PVB, (2) kinetics of water absorption and desorption in PVB, (3) kinetics of water absorption and desorption in EVA, (4) the electrical properties at PVB as a function of temperature and humidity, (5) the electrical properties of EVA as a function of temperature and humidity, (6) solar cell corrosion characteristics, (7) water absorption effects in PVB and EVA, and (8) ion implantation and radiation effects in PVB and EVA.

  4. Next Generation Nuclear Plant Materials Research and Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    G.O. Hayner; R.L. Bratton; R.N. Wright

    2005-09-01

    The U.S Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed, thermal neutron spectrum reactor that will produce electricity and hydrogen in a state-of-the-art thermodynamically efficient manner. The NGNP will use very high burn-up, low-enriched uranium, TRISO-coated fuel and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Project is envisioned to demonstrate the following: (1) A full-scale prototype VHTR by about 2021; (2) High-temperature Brayton Cycle electric power production at full scale with a focus on economic performance; (3) Nuclear-assisted production of hydrogen (with about 10% of the heat) with a focus on economic performance; and (4) By test, the exceptional safety capabilities of the advanced gas-cooled reactors. Further, the NGNP program will: (1) Obtain a Nuclear Regulatory Commission (NRC) License to construct and operate the NGNP, this process will provide a basis for future performance based, risk-informed licensing; and (2) Support the development, testing, and prototyping of hydrogen infrastructures. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. The NGNP Materials R&D Program includes the following elements: (1) Developing a specific approach, program plan and other project management tools for

  5. [Yi lin cuo yao (Essentials of medical works) and its historical materials of medical exchanges between China and Korea].

    Science.gov (United States)

    Liang, Y

    2001-01-01

    Yi lin cuo yao, including 13 chapters and 128 categories, was written by Zheng Zhengxian and collated by Yang Lishou, both Korean imperial physicians in the 16 -- 17th centuries. With notation of a number of the Chinese and Korean medical books and materials in the first decade of the Li dynasty, this book is a comprehensive prescription work, very useful to clinical application. Especially with several points of the formulas from Zhong chao zhi wen fang (Sino -- Korean Prescriptions of Questioning) and zhong chao chuan xi fang (Sino -- Korean Prescriptions of Questioning) recorded in this book connected with Ren zhai zhi zhi fang lun (Renzhai's Comprehensive Prescriptions) in the Song dynasty. This book is an important record of the exchanges on medical ideas between China and Korea. However, it has nothing to do with Yi xue yi wen (Questions on Medicine) by Fu Maoguang, which records the questions and answers between Chinese and Korean officials.

  6. Barcoded materials based on photoluminescent hybrid system of lanthanide ions-doped metal organic framework and silica via ion exchange.

    Science.gov (United States)

    Shen, Xiang; Yan, Bing

    2016-04-15

    A multicolored photoluminescent hybrid system based on lanthanide ions-doped metal organic frameworks/silica composite host has potential in display and barcode applications. By controlling the stoichiometry of the lanthanides via cation exchange, proportional various lanthanide ions are successfully introduced into metal organic frameworks, whose emission intensity is correspondingly proportional to its amount. The resulting luminescent barcodes depend on the lanthanide ions ratios and compositions. Subsequently, the lanthanide ions located in the channels of metal organic frameworks are protected from any interaction with the environment after the modification of silica on the surface. The optical and thermal stability of the hybrid materials are improved for technological application. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Ion exchange uptake of ammonium in wastewater from a Sewage Treatment Plant by zeolitic materials from fly ash.

    Science.gov (United States)

    Juan, Roberto; Hernández, Susana; Andrés, José M; Ruiz, Carmen

    2009-01-30

    The potential value of zeolitic materials (ZM) obtained from a hazardous waste, such as coal fly ash, for the retention of NH(4)(+) present in liquid effluents from a Sewage Treatment Plant (STP) is studied. A wastewater sample was taken from an STP in Zaragoza (Spain) after conventional treatment at the Plant. The water was treated with different amounts of three ZM: NaP1 zeolite, K-F zeolite and K-Chabazite/K-Phillipsite zeolites all of them in powdered and granulated state. The wastewater was treated by two kinds of processes: continuous stirring batch experiments with powdered ZM, and fixed packed bed of granulated ZM in a column. The powdered materials reduced about 80% of NH(4)(+) from wastewater, even in the presence of Ca(2+), which competes with NH(4)(+) for the cation exchange sites in zeolites. Around 70% of NH(4)(+) reduction was achieved with granulated materials. In both cases, moderate ZM/wastewater ratios had to be used to achieve those results, with K-zeolites slightly less effective in NH(4)(+) retention.

  8. 77 FR 2096 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-01-13

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials..., including technical information; financial data, such as salaries and personal information concerning...

  9. Transport and exchange of U-series nuclides between suspended material, dissolved load and colloids in rivers draining basaltic terrains

    Science.gov (United States)

    Pogge von Strandmann, Philip A. E.; Burton, Kevin W.; Porcelli, Don; James, Rachael H.; van Calsteren, Peter; Gislason, Sigurður R.

    2011-01-01

    This study presents uranium and thorium concentrations and activity ratios for all riverine phases (bedload, suspended load, dissolved load and colloids) from basaltic terrains in Iceland and the Azores. Small basaltic islands, such as these, are thought to account for ~ 25% of CO2 consumed by global silicate weathering, and for ~ 45% of the flux of suspended material to the oceans. These data indicate that [U] and [Th] in the dissolved and colloidal fractions are strongly controlled by pH, and to a much lesser extent by levels of dissolved organic carbon (which are low in these environments). At high pH, basalt glass dissolution is enhanced, and secondary mineral formation (e.g. Fe-oxyhydroxides and allophane) is suppressed, resulting in high dissolved [U], and low colloidal [U] and [Th], indicating a direct chemical weathering control on elemental abundances. When the dissolved (234U/238U) activity ratio is >~1.3 (i.e. when physical weathering, groundwater contribution or soil formation are high), there is little isotope exchange between dissolved and colloidal fractions. At lower activity ratios, the dissolved load and colloids have indistinguishable activity ratios, suggesting that when chemical weathering rates are high, secondary clay formation is also high, and colloids rapidly adsorb dissolved U. Many of the suspended sediment samples have (234U/238U) activity ratios of > 1, which suggests that uptake of U onto the suspended load is important. Identical (230Th/232Th) in suspended, dissolved and colloidal samples suggests that Th, like U, is exchanged or sorbed rapidly between all riverine phases. This particle-reactivity, combined with poorly constrained contributions from groundwater and hydrothermal water, and short-term variations in input to soils (volcanic and glacial), suggests that U-series nuclides in riverine material from such basaltic terrains are unlikely to reflect steady state erosion processes.

  10. Application of Chemistry in Materials Research at NASA GRC

    Science.gov (United States)

    Kavandi, Janet L.

    2016-01-01

    Overview of NASA GRC Materials Development. New materials enabled by new chemistries offering unique properties and chemical processing techniques. Durability of materials in harsh environments requires understanding and modeling of chemical interaction of materials with the environment.

  11. Materials research and beam line operation utilizing NSLS. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Liedl, G.L.

    1993-06-01

    MATRIX, a participating research team of Midwest x-ray scattering specialists, continues to operate beam line X-18A at NSLS. Operations of this line now provides state-of-the-art capabilities to a wide range of people in the Materials Science and Engineering research community. Improvements of the beam line continue to be a focus of MATRIX. Throughout this past year the emphasis has been shifting towards improvement in ``user friendly`` aspects. Simplified control operations and a shift to single-user personal computer has been a major part of the effort. Over the past year all 232 operational days were fully utilized. Beam line tests coupled with MATRIX members combined to use 284 days. General user demand for use of the beam line continues to be strong and four groups were provided 48 operating days. Research production has been growing as NSLS and the beam line become a more stable type of operation. For 1992 the MATRIX group published six articles. To date, for 1993 the same group has published, submitted, or has in preparation nine articles. Recent research milestones include: the first quantitative structural information on the as-quenched and early stages of decomposition of supersaturated Al-Li alloys; the first quantitative diffuse scattering measurements on a complex system (Co substitute for Cu YBCO superconductor); demonstration of capabilities of a new UHV surface diffraction chamber with in-situ characterization and temperature control (30-1300K); feasibility of phasing structure factors in a quasicrystal using multiple Bragg scattering.

  12. Focused Research Group in Correlated Electron and Complex Materials

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ziqiang [Boston College, Chestnut Hill, MA (United States)

    2016-02-17

    While the remarkable physical properties of correlated and complex electronic materials hold great promise for technological applications, one of the key values of the research in this field is its profound impact on fundamental physics. The transition metal oxides, pnictides, and chalcogenides play a key role and occupy an especially important place in this field. The basic reason is that the outer shell of transition metals contains the atomic d-orbitals that have small spatial extent, but not too small to behave as localized orbtials. These d-electrons therefore have a small wave function overlap in a solid, e.g. in an octahedral environment, and form energy bands that are relatively narrow and on the scale of the short-range intra-atomic Coulomb repulsion (Hubbard U). In this intermediate correlation regime lies the challenge of the many-body physics responsible for new and unconventional physical properties. The study of correlated electron and complex materials represents both the challenge and the vitality of condensed matter and materials physics and often demands close collaborations among theoretical and experimental groups with complementary techniques. Our team has a track record and a long-term research goal of studying the unusual complexities and emergent behaviors in the charge, spin, and orbital sectors of the transition metal compounds in order to gain basic knowledge of the quantum electronic states of matter. During the funding period of this grant, the team continued their close collaborations between theory, angle-resolved photoemission spectroscopy, and scanning tunneling microscopy and made significant progress and contributions to the field of iron-based superconductors, copper-oxide high-temperature superconductors, triangular lattice transition metal oxide cobaltates, strontium ruthenates, spin orbital coupled iridates, as well as topological insulators and other topological quantum states of matter. These results include both new

  13. [Participant research in reference to historical and dialectical materialism: a contribution to nursing research].

    Science.gov (United States)

    Oliveira, M A

    1991-07-01

    Based upon the studies of Castellanos e Salum (1988) and Egry et al (1991), the author makes a theoretical approach of the participant research as an strategy related to the dialectical and historical materialism, emphasizing its in two main lines: - the dialectical method of exposition and the process of becoming aware.

  14. The Galim LL/EH Polymict Breccia: Evidence for Impact-Induced Exchange Between Reduced and Oxidized Meteoritic Material

    Science.gov (United States)

    Rubin, Alan E.

    1997-01-01

    Galim is a polymict breccia consisting of a heavily shocked (shock stage S6) LL6 chondrite, Galim (a), and an impact-melted EH chondrite, Galim (b). Relict chondrules in Galim (b) served as nucleation sites for euhedral enstatite grains crystallizing from the impact melt. Many of the reduced phases typical of EH chondrites (e.g., Si-bearing metallic Fe-Ni; Ti-bearing troilite) are absent. Galim (b) was probably shock-melted while in contact with a more oxidized source, namely, Galim (a); during this event, Si was oxidized from the metal and Ti was oxidized from troilite. Galim (a) contains shock veins and recrystallized, unzoned olivine. The absence of evidence for reduction in Galim (a) may indicate that the amount of LL material greatly exceeded that of EH material; shock metamorphism may have taken place on the LL parent body. Shock-induced redox reactions such as those inferred for the Galim breccia appear to be restricted mainly to asteroids because the low-end tail of their relative-velocity distribution permits mixing of intact disparate materials (including accretion of projectiles of different oxidation states), whereas the peak of the distribution leads to high equilibration shock pressures (allowing impact-induced exchange between previously accreted, disequilibrated materials). Galim probably formed by a two-stage process: (I) accretion to the LL parent body of an intact EH projectile at low relative velocities, and (2) shock metamorphism of the assemblage by the subsequent impact of another projectile at significantly higher relative velocities.

  15. Fiscal 2000 report on research exchange/technical guidance project, international research exchange project, and invitation program for overseas researchers; 2000 nendo kenkyu koryu gijutsu shido jigyo / kokusai kenkyu koryu jigyo kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    With the purpose of promoting research exchanges with developing countries concerning preservation of the global environment, ICETT (International Center for Environmental Technology Transfer) invited two researchers from Center of Environmental Protection and Chemical Safety, Institute of Industrial Chemistry, Ministry of Industry, Vietnam. The period was from September 19 to December 17, 2000, and the subject was a basic research on environmentally friendly wastewater treatment technology utilizing bacteria in soils. In an experimental system, five reaction layers made of vinyl chloride tubes having a diameter of 16 cm and a height of 50 cm are serially connected, with a suitable filler used for each as a tank for precipitation of heavy metals and treatment of BOD, for anaerobic denitrification, for decomposition of aerobic COD, BOD, etc., for phosphorus treatment, and for bleaching (deodorizing), and with domestic wastewater treated through contact filtration. In spite of a limited period, from the obtained experimental results, the quality of water after the treatment was Class B or higher in the Japanese environmental standards for rivers, lakes and coastal waters, showing high practicability of this system. Further, some pieces of consideration were given additionally to the application in Vietnam. (NEDO)

  16. Very High Temperature Reactor (VHTR) Survey of Materials Research and Development Needs to Support Early Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Eric Shaber; G. Baccaglini; S. Ball; T. Burchell; B. Corwin; T. Fewell; M. Labar; P. MacDonald; P. Rittenhouse; Russ Vollam; F. Southworth

    2003-01-01

    The VHTR reference concept is a helium-cooled, graphite moderated, thermal neutron spectrum reactor with an outlet temperature of 1000 C or higher. It is expected that the VHTR will be purchased in the future as either an electricity producing plant with a direct cycle gas turbine or a hydrogen producing (or other process heat application) plant. The process heat version of the VHTR will require that an intermediate heat exchanger (IHX) and primary gas circulator be located in an adjoining power conversion vessel. A third VHTR mission - actinide burning - can be accomplished with either the hydrogen-production or gas turbine designs. The first ''demonstration'' VHTR will produce both electricity and hydrogen using the IHX to transfer the heat to either a hydrogen production plant or the gas turbine. The plant size, reactor thermal power, and core configuration will be designed to assure passive decay heat removal without fuel damage during accidents. The fuel cycle will be a once-through very high burnup low-enriched uranium fuel cycle. The purpose of this report is to identify the materials research and development needs for the VHTR. To do this, we focused on the plant design described in Section 2, which is similar to the GT-MHR plant design (850 C core outlet temperature). For system or component designs that present significant material challenges (or far greater expense) there may be some viable design alternatives or options that can reduce development needs or allow use of available (cheaper) materials. Nevertheless, we were not able to assess those alternatives in the time allotted for this report and, to move forward with this material research and development assessment, the authors of this report felt that it was necessary to use a GT-MHR type design as the baseline design.

  17. Materials research and beam line operation utilizing NSLS

    Energy Technology Data Exchange (ETDEWEB)

    Liedl, G.L.

    1991-10-01

    MATRIX, a participating research team of Midwest x-ray scattering specialists, continues to operate beam line X-18A at NSLS. Operations of this line now provides state-of-the-art capabilities to a wide range of people in the Materials Science and Engineering research community. Improvements of the beam line continue to be a focus of MATRIX. Throughout this past year the emphasis has been shifting towards improvement in user friendly'' aspects. Simplified control operations and a shift to single-user personal computer has been a major part of the effort. Over the past year the full 242 operational days were utilized. Beam line test and evaluation consumed 21 days with eight MATRIX groups combining to use 170 days. General user demand for use of the beam line continues to be strong and three groups were provided 51 operating days. Research production has been growing as NSLS and the beam line become a more stable type of operation. For 1990 the MATRIX group published nine articles. To data for 1991 the same group has published, submitted, or has in preparation twelve articles. Among the milestones achieved last year on MATRIX member obtained the first data from a new ultra high vacuum chamber with low temperature capability. This is a unique capability at NSLS. Another member demonstrated grazing incidence small angle x-ray scattering capability for kinetic studies of film growth.

  18. Materials research and beam line operation utilizing NSLS. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Liedl, G.L.

    1991-10-01

    MATRIX, a participating research team of Midwest x-ray scattering specialists, continues to operate beam line X-18A at NSLS. Operations of this line now provides state-of-the-art capabilities to a wide range of people in the Materials Science and Engineering research community. Improvements of the beam line continue to be a focus of MATRIX. Throughout this past year the emphasis has been shifting towards improvement in ``user friendly`` aspects. Simplified control operations and a shift to single-user personal computer has been a major part of the effort. Over the past year the full 242 operational days were utilized. Beam line test and evaluation consumed 21 days with eight MATRIX groups combining to use 170 days. General user demand for use of the beam line continues to be strong and three groups were provided 51 operating days. Research production has been growing as NSLS and the beam line become a more stable type of operation. For 1990 the MATRIX group published nine articles. To data for 1991 the same group has published, submitted, or has in preparation twelve articles. Among the milestones achieved last year on MATRIX member obtained the first data from a new ultra high vacuum chamber with low temperature capability. This is a unique capability at NSLS. Another member demonstrated grazing incidence small angle x-ray scattering capability for kinetic studies of film growth.

  19. Next Generation Microchannel Heat Exchangers

    CERN Document Server

    Ohadi, Michael; Dessiatoun, Serguei; Cetegen, Edvin

    2013-01-01

    In Next Generation Microchannel Heat Exchangers, the authors’ focus on the new generation highly efficient heat exchangers and presentation of novel data and technical expertise not available in the open literature.  Next generation micro channels offer record high heat transfer coefficients with pressure drops much less than conventional micro channel heat exchangers. These inherent features promise fast penetration into many mew markets, including high heat flux cooling of electronics, waste heat recovery and energy efficiency enhancement applications, alternative energy systems, as well as applications in mass exchangers and chemical reactor systems. The combination of up to the minute research findings and technical know-how make this book very timely as the search for high performance heat and mass exchangers that can cut costs in materials consumption intensifies.

  20. Mn-based antiperovskite functional materials: Review of research

    Science.gov (United States)

    Tong, Peng; Wang, Bo-Sen; Sun, Yu-Ping

    2013-06-01

    Our recent research on the Mn-based antiperovskite functional materials AXMn3 (A: metal or semiconducting elements; X: C or N) is outlined. Antiperovskite carbides (e.g., AlCMn3) show large magnetocaloric effect comparable to those of typical magnetic refrigerant materials. Enhanced giant magnetoresistance up to 70% at 50 kOe (1 Oe = 79.5775 Am-1) over a wide temperature span was obtained in Ga1-xZnxCMn3 and GaCMn3-xNix. In Cu0.3Sn0.5NMn3.2, negative thermal expansion (NTE) was achieved in a wide temperature region covering room temperature (α = -6.8 ppm/K, 150 K-400 K). Neutron pair distribution function analysis suggests the Cu/Sn-Mn bond fluctuation is the driving force for the NTE in Cu1-xSnxNMn3. In CuN1-xCxMn3 and CuNMn3-yCoy, the temperature coefficient of resistivity (TCR) decreases monotonically from positive to negative as Co or C content increases. TCR is extremely low when the composition approaches the critical points. For example, TCR is ~ 1.29 ppm/K between 240 K and 320 K in CuN0.95C0.05Mn3, which is one twentieth of that in the typical low-TCR materials (~ 25 ppm/K). By studying the critical scaling behavior and X deficiency effect, some clues of localized-electron magnetism have been found against the background of electronic itinerant magnetism.

  1. Research on lunar materials. [optical, chemical, and electrical properties

    Science.gov (United States)

    Gold, T.

    1978-01-01

    Abstracts of 14 research reports relating to investigations of lunar samples are presented. The principal topics covered include: (1) optical properties of surface and core samples; (2) chemical composition of the surface layers of lunar grains: Auger electron spectroscopy of lunar soil and ground rock samples; (3) high frequency electrical properties of lunar soil and rock samples and their relevance for the interpretation of lunar radar observations; (4) the electrostatic dust transport process; (5) secondary electron emission characteristics of lunar soil samples and their relevance to the dust transportation process; (6) grain size distribution in surface soil and core samples; and (7) the optical and chemical effects of simulated solar wind (2keV proton and a particle radiation) on lunar material.

  2. FY 1999 project report on the invitation program for developing countries. International researcher exchange project - Researcher exchange/technical guidance project; 1999 nendo kenkyu koryu gijutsu shido jigyo / kokusai kenkyu koryu jigyo kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the promotion of research exchanges on global environmental preservation with developing countries, Ms. Malee Santikunaporn, lecturer of Faculty of Engineering, Thammasat University, Bankok, Thailand was invited. Desulfurization/denitrification facilities, which are being widely spread in developed countries, have marked effects, but high prices are an obstacle to the spread in developing countries. To make them spread in developing countries, it is needed to develop the technology which is low in price and meets the actual state in developing countries. As a technology with high viability, a system to simultaneously remove SOx and NOx was cited in which Cu is used as catalyst and adsorbent and into which the catalyst regeneration process is integrated. Considering it, technical exchanges on Cu-SiO{sub 2} catalyst as the basic theme were made during September 26 - December 23, 1999. Through visits on and exchanges with Tokyo Institute of Technology, ICEET, University of Kyoto, etc., understanding was deepened about how each country is tackling environmental problems. The theme 'Oxidative sorption of SO2 by Cu-SiO{sub 2} catalyst: characteristics of catalyst' could deepen knowledge/information of the developmental research as a system for simultaneous removal of SOx/NOx. The data obtained indicated great practicality of Cu-SiO{sub 2}. (NEDO)

  3. NATO Advanced Research Workshop on Brilliant Light Facilities and Research in Life and Material Sciences

    CERN Document Server

    Tsakanov, Vasili; Brilliant Light in Life and Material Sciences

    2007-01-01

    The present book contains an excellent overview of the status and highlights of brilliant light facilities and their applications in biology, chemistry, medicine, materials and environmental sciences. Overview papers on diverse fields of research by leading experts are accompanied by the highlights in the near and long-term perspectives of brilliant X-Ray photon beam usage for fundamental and applied research. The book includes advanced topics in the fields of high brightness photon beams, instrumentation, the spectroscopy, microscopy, scattering and imaging experimental techniques and their applications. The book is strongly recommended for students, engineers and scientists in the field of accelerator physics, X-ray optics and instrumentation, life, materials and environmental sciences, bio and nanotechnology.

  4. Light Spins of Cylindrical Electromagnetic Waves and their Jumps across Material Interfaces in the Presence of Energy Exchange

    Directory of Open Access Journals (Sweden)

    J. Mok

    2016-08-01

    Full Text Available We investigate light spins for cylindrical electromagnetic waves on resonance. To this goal, we consider both a dielectric cylinder of infinite length immersed in vacuum and a cylindrical hole punched through a dense dielectric medium. In order for waves of constant frequencies to be established through lossless media, energy absorption is allowed in the surrounding medium to compensate for radiation loss. The dispersion relation is then numerically solved for an asymmetry parameter implying a balance in energy exchange. Numerical studies are performed by varying parameters of refractive index contrast, azimuthal mode index, and size parameter of a cylindrical object. The resulting data is presented mostly in terms of a specific spin, defined as light spin per energy density. This specific spin is found to be bounded in its magnitude, with its maximum associated with either optical vortices or large rotations. Depending on parametric combinations, the specific spin could not only undergo finite jumps across the material interface but also exhibit limit behaviors.

  5. Indoor Solar Thermal Energy Saving Time with Phase Change Material in a Horizontal Shell and Finned-Tube Heat Exchanger

    Directory of Open Access Journals (Sweden)

    S. Paria

    2015-01-01

    Full Text Available An experimental as well as numerical investigation was conducted on the melting/solidification processes of a stationary phase change material (PCM in a shell around a finned-tube heat exchanger system. The PCM was stored in the horizontal annular space between a shell and finned-tube where distilled water was employed as the heat transfer fluid (HTF. The focus of this study was on the behavior of PCM for storage (charging or melting and removal (discharging or solidification, as well as the effect of flow rate on the charged and discharged solar thermal energy. The impact of the Reynolds number was determined and the results were compared with each other to reveal the changes in amount of stored thermal energy with the variation of heat transfer fluid flow rates. The results showed that, by increasing the Reynolds number from 1000 to 2000, the total melting time decreases by 58%. The process of solidification also will speed up with increasing Reynolds number in the discharging process. The results also indicated that the fluctuation of gradient temperature decreased and became smooth with increasing Reynolds number. As a result, by increasing the Reynolds number in the charging process, the theoretical efficiency rises.

  6. Indoor solar thermal energy saving time with phase change material in a horizontal shell and finned-tube heat exchanger.

    Science.gov (United States)

    Paria, S; Sarhan, A A D; Goodarzi, M S; Baradaran, S; Rahmanian, B; Yarmand, H; Alavi, M A; Kazi, S N; Metselaar, H S C

    2015-01-01

    An experimental as well as numerical investigation was conducted on the melting/solidification processes of a stationary phase change material (PCM) in a shell around a finned-tube heat exchanger system. The PCM was stored in the horizontal annular space between a shell and finned-tube where distilled water was employed as the heat transfer fluid (HTF). The focus of this study was on the behavior of PCM for storage (charging or melting) and removal (discharging or solidification), as well as the effect of flow rate on the charged and discharged solar thermal energy. The impact of the Reynolds number was determined and the results were compared with each other to reveal the changes in amount of stored thermal energy with the variation of heat transfer fluid flow rates. The results showed that, by increasing the Reynolds number from 1000 to 2000, the total melting time decreases by 58%. The process of solidification also will speed up with increasing Reynolds number in the discharging process. The results also indicated that the fluctuation of gradient temperature decreased and became smooth with increasing Reynolds number. As a result, by increasing the Reynolds number in the charging process, the theoretical efficiency rises.

  7. Numerical Study of Solidification in a Plate Heat Exchange Device with a Zigzag Configuration Containing Multiple Phase-Change-Materials

    Directory of Open Access Journals (Sweden)

    Peilun Wang

    2016-05-01

    Full Text Available Latent heat thermal energy storage (TES plays an important role in the advocation of TES in contrast to sensible energy storage because of the large storage energy densities per unit mass/volume possible at a nearly constant thermal energy. In the current study, a heat exchange device with a zigzag configuration containing multiple phase-change-materials (m-PCMs was considered, and an experimental system was built to validate the model for a single PCM. A two-dimensional numerical model was developed using the ANSYS Fluent 14.0 software program. The energy fractions method was put forward to calculate the average Ste number and the influence of Re and Ste numbers on the discharge process were studied. The influence of phase change temperature among m-PCMs on the solidification process has also been studied. A new boundary condition was defined to determine the combined effect of the Re and Ste numbers on the discharging process. The modelling results show that for a given input power, the Ste (or Re number has a significant impact on the discharging process; however, the period value of inlet velocity has almost no impact on it. Besides, the zigzag plate with m-PCMs has a good impact on the temperature shock as “filter action” in the discharging process.

  8. International research cooperation in fiscal 1997. Report on the results of researches for the development of tribo-materials; 1997 nendo kokusai kenkyu kyoryoku jigyo. Tribo material no kaihatsu chosa seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Researches were conducted for the development of tribo-materials for the improvement of energy efficiency for equipment with slide members usable for example aboard automobiles, and the result is reported for fiscal 1997. In the research for the creation of substrate materials, some metals different in hardness, iron-base materials, titanium-base materials, etc., were selected, and experiments were conducted to disclose the effect of the substrate hardness/surface roughness on the critical load under which gas phase coatings fracture. In the research about surface treatment, the arc ion plating method is employed to produce TiN coatings on substrates of SKD11 and Ti-6Al-4V, and the critical loads were evaluated using a heavy duty, acoustic detection type adhesion evaluator and a sliding wear tester. Furthermore, the substrate/coating interface is subjected to observation under high-resolution transmission electron microscope. As for the evaluation of coating characteristics, the effects of the hardness of the coating itself, Young`s modulus, and toughness on the fracture of the coating were investigated. During the international joint researches, information was exchanged with National Institute for Standards and Technology, U.S. 11 refs., 64 figs., 4 tabs.

  9. NDEx - the Network Data Exchange, A Network Commons for Biologists | Informatics Technology for Cancer Research (ITCR)

    Science.gov (United States)

    Network models of biology, whether curated or derived from large-scale data analysis, are critical tools in the understanding of cancer mechanisms and in the design and personalization of therapies. The NDEx Project (Network Data Exchange) will create, deploy, and maintain an open-source, web-based software platform and public website to enable scientists, organizations, and software applications to share, store, manipulate, and publish biological networks.

  10. Frontiers in propulsion research: Laser, matter-antimatter, excited helium, energy exchange thermonuclear fusion

    Science.gov (United States)

    Papailiou, D. D. (Editor)

    1975-01-01

    Concepts are described that presently appear to have the potential for propulsion applications in the post-1990 era of space technology. The studies are still in progress, and only the current status of investigation is presented. The topics for possible propulsion application are lasers, nuclear fusion, matter-antimatter annihilation, electronically excited helium, energy exchange through the interaction of various fields, laser propagation, and thermonuclear fusion technology.

  11. Research on magnetic materials of interest in transportation

    Science.gov (United States)

    2000-04-01

    This paper reports the results of an investigation on magnetic materials of interest in the transportation field. It includes information about the present state of magnetic materials and examines the recently discovered phenomenon referred to as col...

  12. Progress on research of materials science and biotechnology by ion beam application

    Energy Technology Data Exchange (ETDEWEB)

    Ishigaki, Isao [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    1997-03-01

    Research of materials science and biotechnology by ion beam application in Takasaki Establishment was reviewed. Especially, the recent progresses of research on semiconductors in space, creation of new functional materials and topics in biotechnology were reported. (author)

  13. 78 FR 39017 - Proposal Review Panel for Materials Research, Notice of Meeting

    Science.gov (United States)

    2013-06-28

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the.... Chuck Bouldin, Program Director, Materials Research Science and Engineering Centers Program, Division of..., including technical information; financial data, such as salaries and personal information concerning...

  14. 77 FR 56236 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-09-12

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science... technical information; financial data, such as salaries and personal information concerning individuals...

  15. 78 FR 40519 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2013-07-05

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the.... Charles Ying, Program Director, Materials Research Science and Engineering Centers Program, Division of... a proprietary or confidential nature, including technical information; financial data, such as...

  16. 75 FR 9001 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2010-02-26

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Colorado.... Contact Person: Dr. Charles Ying, Program Director, Materials Research Science and Engineering Centers... nature, including technical information; financial data, such as salaries and personal information...

  17. 78 FR 30342 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2013-05-22

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Duke.... Jones, Program Director, Materials Research Science and Engineering Centers Program, Division of... confidential nature, including technical information; financial data, such as salaries and personal information...

  18. 77 FR 2095 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-01-13

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Georgia... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science..., including technical information; financial data, such as salaries and personal information concerning...

  19. 77 FR 61432 - Proposal Review for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-10-09

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Harvard... Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201... technical information; financial data, such as salaries and personal information concerning individuals...

  20. Synopsis of utilization research on SRIC raw materials

    Science.gov (United States)

    John B. Crist

    1983-01-01

    The take-home message of this paper is this: Raw materials produced using SRIC are suitable for many reconstituted end products. Juvenility, rapid growth, and bark contents do not greatly hinder the usefulness of the raw materials. In the future, increased industrial acceptance of SRIC methods and materials should be a major thrust and is discussed.

  1. Materials and Molecular Research Division annual report 1983

    Energy Technology Data Exchange (ETDEWEB)

    Searcy, A.W.; Muller, R.H.; Peterson, C.V.

    1984-07-01

    Progress is reported in the following fields: materials sciences (metallurgy and ceramics, solid-state physics, materials chemistry), chemical sciences (fundamental interactions, processes and techniques), actinide chemistry, fossil energy, electrochemical energy storage systems, superconducting magnets, semiconductor materials and devices, and work for others. (DLC)

  2. ISS Material Science Research Rack HWIL Interface Simulation

    Science.gov (United States)

    Williams, Philip J.; Ballard, Gary H.; Crumbley, Robert T. (Technical Monitor)

    2002-01-01

    In this paper, the first Material Science Research Rack (MSRR-1) hardware-in-the-loop (HWIL) interface simulation is described. Dynamic Concepts developed this HWIL simulation system with funding and management provided by the Flight Software group (ED14) of NASA-MSFC's Avionics Department. The HWIL system has been used both as a flight software development environment and as a software qualification tool. To fulfill these roles, the HWIL simulator accurately models the system dynamics of many MSRR-1 subsystems and emulates most of the internal interface signals. The modeled subsystems include the Experiment Modules, the Thermal Environment Control System, the Vacuum Access System, the Solid State Power Controller Module, and the Active Rack Isolation Systems. The emulated signals reside on three separate MIL-STD-1553B digital communication buses, the ISS Medium Rate Data Link, and several analog controller and sensor signals. To enhance the range of testing, it was necessary to simulate several off-nominal conditions that may occur in the interfacing subsystems.

  3. Solid oxide fuel cell material research in SICCAS

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.; Ye, X.; Zen, F.; Li, J.; Shi, J.; Wen, T. [Chinese Academy of Sciences, Shanghai Inst. of Ceramics, Shanghai (China). CAS Key Laboratory of Materials for Energy Conversion

    2010-07-01

    A fuel cell is a device that transfers the chemical energy of fuels directly to electricity. Because its high operating temperature enables the further application of the co-generated heat, the solid oxide fuel cell (SOFC) has the highest efficiency in different types of fuel cells. SICCAS has almost 15 years of experience in the research, development and manufacture of planar type SOFCs. In order to reduce the cost, extend the life time, and propel the commercialization of SOFCs, the company is now focusing on intermediate temperature SOFCs following an international tendency in this direction. Two options for reducing the operating temperatures involve decreasing the thickness of the electrolyte or adopting new materials with higher conductivity. This paper presented a study that used both these methods to make nickel (Ni)/yttria stabilized zirconia (YSZ) anode supported scandia-stabilized zirconia electrolyte composite membranes, using an astrocyte-derived extracellullar matrix (ASECM) with the tape casting technique. In order to evaluate various cathodes, single cells were also constructed on the ASECM. It was concluded that a cell with LBSM-GDC cathode could exhibit good activity, and the output power density reached 0.738W/cm2 at 750 degrees Celsius.

  4. Measurement of materialism and spiritualism in substance abuse research.

    Science.gov (United States)

    Mathew, R J; Mathew, V G; Wilson, W H; Georgi, J M

    1995-07-01

    A modified version of an instrument called the Mathew Materialism-Spiritualism Scale (MMSS), originally developed in India, was evaluated for possible use in substance abuse research in the U.S. The scale was administered to 62 individuals recovering from substance use, 20 clergy people and 61 general controls. Test-retest reliability for the MMSS was verified by administering it to 18 control subjects on two separate occasions, 7 days apart. The Pearson correlation for the MMSS total scores was 0.83 (p < .0001). Internal consistency was examined with Cronbach's alpha in the entire sample of 143 subjects; the result for the total score was .93. Factor analysis showed a factor structure compatible with the subscales proposed by the developer. Women, in general, obtained higher spirituality scores. Members of the recovering group obtained significantly higher scores on "character" and "mysticism" than the general controls. When general controls were divided into MAST positive and MAST negative individuals, the MAST positive group obtained lower scores than the recovering group for "God," "mysticism" and "character." MAST negative individuals had lower scores on "mysticism" than the recovering group. Christians had higher scores on "God" and "religion" subscales than did nonChristians and agnostics. The results of this study need confirmation using an improved methodology and larger sample sizes. However, they suggest that the scale may be useful for the study of spirituality in the U.S.

  5. Energy and environmental research emphasizing low-rank coal: Task 6.1. Corrosion of advanced structural materials

    Energy Technology Data Exchange (ETDEWEB)

    Nowok, J.W.; Strobel, T.M.; Bieber, J.A.; Hurley, J.P.

    1995-04-01

    In order to increase national energy self-sufficiency for the near future, energy systems will be required to fire low-grade fuels and use more efficient energy cycles than those available today. The steam cycle used at present is limited to a maximum steam temperature of 550{degrees}C and thus a conversion efficiency of 35%. To boost efficiency significantly, much higher working fluid temperatures are required, compelling subsystems to operate at much higher temperatures and, therefore, in much more corrosive environments than those currently used. Problems of special concern are corrosion and fatigue of direct-fired turbine blades, corrosion and blinding of hot-gas cleanup filters, catastrophic failure of high-temperature heat exchangers, and spalling and dissolution of refractory materials. The extreme conditions will require the use of advanced structural materials such as high-temperature ceramics for the construction of the subsystems. Unfortunately, little is known of the performance of these materials in actual coal combustion environments. Although some corrosion testing has been performed in the past, most has been done by groups experimenting with ash or slag stimulants composed of only one or two simple compounds. For this project performed at the Energy & Environmental Research Center (EERC), actual coal ash and slag will be used in simulated combustion conditions so that more realistic determinations of the mechanisms of corrosion can be made. The work includes three main research areas focusing on two fossil energy subsystems: high-temperature heat exchangers and hot-gas cleanup filters. The first area involves developing existing abilities in thermodynamic equilibrium calculations to determine the most appropriate corroding agents to include in the tests; the second area involves coal slag corrosion of high temperature heat exchangers; and the third, lower-temperature ash and gas corrosion hot-gas cleanup filters.

  6. Numerical heat transfer studies of the fatty acids for different heat exchanger materials on the performance of a latent heat storage system

    Energy Technology Data Exchange (ETDEWEB)

    Atul Sharma; Lee Dong Won; Jun Un Park [Korea Institute of Energy Research, Daejeon (Korea). Solar Thermal Research Centre; Buddhi, D. [Devi Ahilya University, Indore (India). Thermal Energy Storage Laboratory

    2005-11-01

    Theoretical investigations of fatty acids as a phase change material (PCM) for energy storage system have been conducted in this study. The selected fatty acids were capric acid, lauric acid, myristic acid, palmitic acid and stearic acid. For the two-dimensional simulation model based on the enthalpy approach, calculations have been made for the melt fraction with conduction only. Glass, stainless steel, tin, aluminium mixed, aluminium and copper were used as heat exchanger materials in the numerical calculations. Theoretical results show that capric acid was found good compatibility with latent heat storage system. The large value of thermal conductivity of heat exchanger materials did not make significant contribution on the melt fraction. (author)

  7. 78 FR 11903 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2013-02-20

    ... FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal... following meeting: Name: Site Visit review of the Materials Research Science and Engineering Center (MRSEC) at the University of Wisconsin--Madison by NSF Division of Materials Research (DMR) 1203. Dates...

  8. Developing bulk exchange spring magnets

    Energy Technology Data Exchange (ETDEWEB)

    Mccall, Scott K.; Kuntz, Joshua D.

    2017-06-27

    A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

  9. From Ships in the Night to Exchanges in the Piazza: Renegotiating the Researcher-Stakeholder Nexus in Climate Adaptation

    Science.gov (United States)

    Jackson, S. T.

    2016-12-01

    A substantial divide remains between the communities of research, embedded largely in universities and science agencies, and the communities of practice, comprising the natural-resource managers and other decision-makers in diverse federal, state, local, and tribal agencies and in private-sector enterprises and organizations. In spite of clear needs and best intentions, engagement among the respective communities is imperfect; researchers and stakeholders are often like ships passing in the night, exchanging brief, cryptic signals. A variety of boundary organizations have been developed to facilitate the communications, and a number of successful models for researcher-stakeholder exchange and engagement have been applied. At least two substantial challenges remain. First, how can the successes be scaled up and proliferated to meet the vast demands posed by climate adaptation? Second, how can the various boundary organizations most effectively foster this expansion, individually and collectively? Meeting these challenges will require coordination among the respective organizations, changes in the cultures of research and management, and careful assessment of process and outcomes.

  10. New Optical Sensing Materials for Application in Marine Research

    Science.gov (United States)

    Borisov, S.; Klimant, I.

    2012-04-01

    Optical chemosensors are versatile analytical tools which find application in numerous fields of science and technology. They proved to be a promising alternative to electrochemical methods and are applied increasingly often in marine research. However, not all state-of-the- art optical chemosensors are suitable for these demanding applications since they do not fully fulfil the requirements of high luminescence brightness, high chemical- and photochemical stability or their spectral properties are not adequate. Therefore, development of new advanced sensing materials is still of utmost importance. Here we present a set of novel optical sensing materials recently developed in the Institute of Analytical Chemistry and Food Chemistry which are optimized for marine applications. Particularly, we present new NIR indicators and sensors for oxygen and pH which feature high brightness and low level of autofluorescence. The oxygen sensors rely on highly photostable metal complexes of benzoporphyrins and azabenzoporphyrins and enable several important applications such as simultaneous monitoring of oxygen and chlorophyll or ultra-fast oxygen monitoring (Eddy correlation). We also developed ulta-sensitive oxygen optodes which enable monitoring in nM range and are primary designed for investigation of oxygen minimum zones. The dynamic range of our new NIR pH indicators based on aza-BODIPY dyes is optimized for the marine environment. A highly sensitive NIR luminescent phosphor (chromium(III) doped yttrium aluminium borate) can be used for non-invasive temperature measurements. Notably, the oxygen, pH sensors and temperature sensors are fully compatible with the commercially available fiber-optic readers (Firesting from PyroScience). An optical CO2 sensor for marine applications employs novel diketopyrrolopyrrol indicators and enables ratiometric imaging using a CCD camera. Oxygen, pH and temperature sensors suitable for lifetime and ratiometric imaging of analytes

  11. Overview of Superconducting Materials Researches held in HFLSM at Tohoku University(Part III. Superconducting Materials Researches)

    OpenAIRE

    Noto, Koshichi; Watanabe, Kazuo; Muto, Yoshio

    1987-01-01

    Recent remarkable progresses in practical superconducting conductors for high field magnets and advanced high field superconducting materials developments held at the High Field Laboratory for Superconducting Materials (HFLSM) are overlooked.

  12. A common basis for facilitated legitimate exchange of biological materials proposed by the European Culture Collections' Organisation

    Directory of Open Access Journals (Sweden)

    Dagmar Fritze

    2009-12-01

    Full Text Available Being charged with the task of accessioning and supplying of living microbiological material, microbial culture collections are institutions that play a central role between the interests of a variety of user communities. On the one side are the providers of living microbiological material, such as individual scientists, institutions and countries of origin and on the other side are the various kinds of recipients/users of cultures of microorganisms from academia and industry. Thus, providing access to high quality biological material and scientific services while at the same time observing donor countries' rights, intellectual property rights, biosafety and biosecurity aspects poses demanding challenges. E.g. donor countries rights relate to Article 15 of the Convention on Biological Diversity: "Contracting parties …. recognize the sovereign rights of states over their natural resources …. shall facilitate access to resources … and not impose restrictions that run counter to the aims of the Convention. Access to natural resources shall be by mutually agreed terms and subject to prior informed consent ..." The use of a proposed standard contract by culture collections is discussed as a way of contractually safeguarding the existing research commons, while observing the new rights established in the Convention on Biological Diversity as well as other existing and new legislation impacting on the accessibility of living microbial material.

  13. Materials Science Research Rack-1 Fire Suppressant Distribution Test Report

    Science.gov (United States)

    Wieland, P. O.

    2002-01-01

    Fire suppressant distribution testing was performed on the Materials Science Research Rack-1 (MSRR-1), a furnace facility payload that will be installed in the U.S. Lab module of the International Space Station. Unlike racks that were tested previously, the MSRR-1 uses the Active Rack Isolation System (ARIS) to reduce vibration on experiments, so the effects of ARIS on fire suppressant distribution were unknown. Two tests were performed to map the distribution of CO2 fire suppressant throughout a mockup of the MSRR-1 designed to have the same component volumes and flowpath restrictions as the flight rack. For the first test, the average maximum CO2 concentration for the rack was 60 percent, achieved within 45 s of discharge initiation, meeting the requirement to reach 50 percent throughout the rack within 1 min. For the second test, one of the experiment mockups was removed to provide a worst-case configuration, and the average maximum CO2 concentration for the rack was 58 percent. Comparing the results of this testing with results from previous testing leads to several general conclusions that can be used to evaluate future racks. The MSRR-1 will meet the requirements for fire suppressant distribution. Primary factors that affect the ability to meet the CO2 distribution requirements are the free air volume in the rack and the total area and distribution of openings in the rack shell. The length of the suppressant flowpath and degree of tortuousness has little correlation with CO2 concentration. The total area of holes in the rack shell could be significantly increased. The free air volume could be significantly increased. To ensure the highest maximum CO2 concentration, the PFE nozzle should be inserted to the stop on the nozzle.

  14. RESEARCH A randomised controlled trial of suture materials used ...

    African Journals Online (AJOL)

    A variety of suture materials and skin staples (SS) are used for skin closure after caesarean section (CS). Some of these suture materials have been associated with lower wound infection rates, reduced pain, improved cosmetic outcomes and cost-effectiveness.1 On the other hand, SS are easier to use and are associated ...

  15. Packaging Research Outputs into Extension and Training Materials ...

    African Journals Online (AJOL)

    Based on the experiences and lessons learned, a series of recommendations are made for improving the production process of extension and training materials. These emphasize (i) determining the type of material to be produced and why, (ii) applying effective writing and editing guidelines, (iii) using appropriate designs ...

  16. Tweet reach: a research protocol for using Twitter to increase information exchange in people with communication disabilities.

    Science.gov (United States)

    Hemsley, Bronwyn; Palmer, Stuart; Balandin, Susan

    2014-04-01

    To (a) outline the background to research evaluating Twitter use by people with severe physical and communication disabilities participating actively in online communication forums for increasing information exchange and (b) illustrate a range of potential methods that might be applied in furthering research on the use of social media by people with developmental and acquired communication disabilities. The literature on communication disabilities, augmentative and alternative communication, and social media research informed the rationale for and design of three studies investigating the use of Twitter by people with communication disabilities. To date, there is little information in the literature about how people with a range of communication disabilities might use Twitter to increase their access to information and help them to feel knowledgeable and in control of their own lives. In this paper, three studies are proposed to investigate the use of Twitter by people with communication disabilities.

  17. Factors affecting spatial and temporal variability in material exchange between the Southern Everglades wetlands and Florida Bay (USA)

    Science.gov (United States)

    Sutula, Martha A.; Perez, Brian C.; Reyes, Enrique; Childers, Daniel L.; Davis, Steve; Day, John W.; Rudnick, David; Sklar, Fred

    2003-08-01

    Physical and biological processes controlling spatial and temporal variations in material concentration and exchange between the Southern Everglades wetlands and Florida Bay were studied for 2.5 years in three of the five major creek systems draining the watershed. Daily total nitrogen (TN), and total phosphorus (TP) fluxes were measured for 2 years in Taylor River, and ten 10-day intensive studies were conducted in this creek to estimate the seasonal flux of dissolved inorganic nitrogen (N), phosphorus (P), total organic carbon (TOC), and suspended matter. Four 10-day studies were conducted simultaneously in Taylor, McCormick, and Trout Creeks to study the spatial variation in concentration and flux. The annual fluxes of TOC, TN, and TP from the Southern Everglades were estimated from regression equations. The Southern Everglades watershed, a 460-km 2 area that includes Taylor Slough and the area south of the C-111 canal, exported 7.1 g C m -2, 0.46 g N m -2, and 0.007 g P m -2, annually. Everglades P flux is three to four orders of magnitude lower than published flux estimates from wetlands influenced by terrigenous sedimentary inputs. These low P flux values reflect both the inherently low P content of Everglades surface water and the efficiency of Everglades carbonate sediments and biota in conserving and recycling this limiting nutrient. The seasonal variation of freshwater input to the watershed was responsible for major temporal variations in N, P, and C export to Florida Bay; approximately 99% of the export occurred during the rainy season. Wind-driven forcing was most important during the later stages of the dry season when low freshwater head coincided with southerly winds, resulting in a net import of water and materials into the wetlands. We also observed an east to west decrease in TN:TP ratio from 212:1 to 127:1. Major spatial gradients in N:P ratios and nutrient concentration and flux among the creek were consistent with the westward decrease in

  18. University of Illinois at Urbana-Champaign, Materials Research Laboratory progress report for FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The Materials Research Laboratory at the University of Illinois is an interdisciplinary laboratory operated in the College of Engineering. Its focus is the science of materials and it supports research in the areas of condensed matter physics, solid state chemistry, and materials science. This report addresses topics such as: an MRL overview; budget; general programmatic and institutional issues; new programs; research summaries for metallurgy, ceramics, solid state physics, and materials chemistry.

  19. From Mini Development-Machine to Being Human: Research as Social Exchange

    Directory of Open Access Journals (Sweden)

    Merrill S. A. Baker-Médard

    2014-07-01

    Full Text Available This research note is part of the thematic section, Practical Realities of Giving Back, in the special issue titled “Giving Back in Field Research,” published as Volume 10, Issue 2 in the Journal of Research Practice.

  20. Preliminary Research on Damping Material Composed of Flexible Porous Material and Liquid

    Science.gov (United States)

    Kang, Beomsuk; Okuma, Masaaki; Segawa, Shuhei

    This paper presents a new type of damping material composed of flexible porous material such as polyurethane foam and liquid such as water. This new type of damping material costs less than viscoelastic materials such as Sorbothane, and is anticipated to have a better damping effect. At the same time, installation of the new type of damping material is as easy as that of usual viscoelastic materials. The damping effect of this material on the vibration of a cantilever iron plate is experimentally compared with the one of a viscoelastic material. The damping effect on a rail piece with a length of 1.2m and a weight of 72kg is also experimentally investigated. The experimental results show a good damping effect. The design variables of this new damping material such as the liquid viscosity and the hardness of the porous material are thought to influence the damping effect, consequently are investigated by carrying out vibration testing of a cantilever iron plate (material:SS400, size:300×440×5mm, weight:5.2kg).

  1. Design and evaluation of foamed asphalt base materials : [research summary].

    Science.gov (United States)

    2013-05-01

    Foamed asphalt stabilized base (FASB) combines reclaimed asphalt pavement (RAP), : recycled concrete (RC), and/or graded aggregate base (GAB) with a foamed asphalt : binder to produce a partially stabilized base material. Although widely used, most :...

  2. Materials research in africa: Rising from the Falls

    Science.gov (United States)

    Chaker, Mohamed; Rosei, Federico

    2012-03-01

    Materials science and technology could offer the opportunity to address vital needs of African people. But improving the infrastructure for science education and dissemination of knowledge is the first step to take.

  3. Vanderbilt free electron laser project in biomedical and materials research

    Science.gov (United States)

    Haglund, Richard F.; Tolk, N. H.

    1988-06-01

    The Medical Free Electron Laser Program was awarded to develop, construct and operate a free-electron laser facility dedicated to biomedical and materials studies, with particular emphases on: fundamental studies of absorption and localization of electromagnetic energy on and near material surfaces, especially through electronic and other selective, non-statistical processes; non-thermal photon-materials interactions (e.g., electronic bond-breaking or vibrational energy transfer) in physical and biological materials as well as in long-wavelength biopolymer dynamics; development of FEL-based methods to study drug action and to characterize biomolecular properties and metabolic processes in biomembranes; clinical applications in otolaryngology, neurosurgery, ophthalmology and radiology stressing the use of the laser for selective laser-tissue, laser-cellular and laser-molecule interactions in both therapeutic and diagnostic modalities.

  4. Talk, trust and time: a longitudinal study evaluating knowledge translation and exchange processes for research on violence against women

    Directory of Open Access Journals (Sweden)

    Jack Susan M

    2011-09-01

    Full Text Available Abstract Background Violence against women (VAW is a major public health problem. Translation of VAW research to policy and practice is an area that remains understudied, but provides the opportunity to examine knowledge translation and exchange (KTE processes in a complex, multi-stakeholder context. In a series of studies including two randomized trials, the McMaster University VAW Research Program studied one key research gap: evidence about the effectiveness of screening women for exposure to intimate partner violence. This project developed and evaluated KTE strategies to share research findings with policymakers, health and community service providers, and women's advocates. Methods A longitudinal cross-sectional design, applying concurrent mixed data collection methods (surveys, interviews, and focus groups, was used to evaluate the utility of specific KTE strategies, including a series of workshops and a day-long Family Violence Knowledge Exchange Forum, on research sharing, uptake, and use. Results Participants valued the opportunity to meet with researchers, provide feedback on key messages, and make personal connections with other stakeholders. A number of factors specific to the knowledge itself, stakeholders' contexts, and the nature of the knowledge gap being addressed influenced the uptake, sharing, and use of the research. The types of knowledge use changed across time, and were specifically related to both the types of decisions being made, and to stage of decision making; most reported use was conceptual or symbolic, with few examples of instrumental use. Participants did report actively sharing the research findings with their own networks. Further examination of these second-order knowledge-sharing processes is required, including development of appropriate methods and measures for its assessment. Some participants reported that they would not use the research evidence in their decision making when it contradicted professional

  5. Research and applications of N-halamine biocidal materials

    Directory of Open Access Journals (Sweden)

    KANG Zhenzhen

    2012-10-01

    Full Text Available N-halamines,a new class of biocides,overcome some of the disadvantages caused by the traditional biocides in practical applications.They are environmentally friendly germicides due to their fast and efficient sterilization,storage stability,and regeneration.Earlier studies on N-halamines mainly focused on the syntheses and applications of small molecular organic N-halamines such as fivemembered and six-membered heterocyclic N-halamine compounds.Compared to traditional inorganic halogen-containing disinfectants such as chlorine gas,sodium hypochlorite,chlorine dioxide,these heterocyclic N-halamines can maintain disinfection capacity in the water for longer time due to their better stability.Since the late 20th century,non-leaching biocial N-halamine materials have received much attention.Some novel N-halmine precursors with binding groups have been covalently bounded to various materials such as cellulose fiber,silica gel,polystyrene,polyethylene,and polyurethane to produce nonleaching biocidal materials.Specially,the successful development of macroporous cross-linked N-halamine polymer resin materials (Halopure and related technologies created a new era for the applications of N-halamine materials in the disinfection of drinking water.In this review paper,the antibacterial mechanism and synthetic methods of N-halamine biocidal materials and their application prospects in various fields of daily life were introduced.Their development prospects were also made.

  6. Classroom Teachers and Classroom Research. JALT Applied Materials.

    Science.gov (United States)

    Griffee, Dale T., Ed.; Nunan, David, Ed.

    This collection of papers leads classroom language teachers through the process of developing and completing a classroom research project. Arranged in four sections, they include: "Language Teaching and Research" (David Nunan); "Where Are We Now? Trends, Teachers, and Classroom Research" (Dale T. Griffee); "First Things First: Writing the Research…

  7. Deepening Our Understanding of Academic Inbreeding Effects on Research Information Exchange and Scientific Output: New Insights for Academic Based Research

    Science.gov (United States)

    Horta, Hugo

    2013-01-01

    This paper analyzes the impact of academic inbreeding in relation to academic research, and proposes a new conceptual framework for its analysis. We find that mobility (or lack of) at the early research career stage is decisive in influencing academic behaviors and scientific productivity. Less mobile academics have more inward oriented…

  8. Enhancing Students Academic Writing Skill by Using Research Paper Writing Instructional Materials

    OpenAIRE

    Ghufron, M. Ali

    2015-01-01

    Tujuan dari penelitian ini adalah (1) untuk menginvestigasi apakah penggunaan Research Paper Writing Instructional Materials dan meningkatkan kemampuan mahasiswa dalam menulis paper/artikel jurnal penelitian; dan (2) untuk menginvestigasi situasi kelas ketika Research PaperWriting Instructional Materials diterapkan sebagai materi ajar di kelas. Penelitian ini termasuk dalam kategori penelitian tindakan kelas. Penelitian tindakan ini dilakukan pada mahasiswa semester IV Prodi Pendidikan Bahasa...

  9. Evidence, Policy and Pragmatics: A Case Study on the Development of a National Research and Data Strategy on Children's Lives and the Role of Knowledge Exchange

    Science.gov (United States)

    Hanafin, Sinéad; Roche, Gillian; Brooks, Anne-Marie; Meaney, Bairbre

    2013-01-01

    This paper presents a case study on the transfer of research into policy and describes how evidence was used to inform, develop, frame and ultimately agree a national strategy for research and data on children's lives in Ireland. The paper highlights key issues arising in the research-policy exchange, but also argues that evidence on its own,…

  10. Research Update: Computational materials discovery in soft matter

    Directory of Open Access Journals (Sweden)

    Tristan Bereau

    2016-05-01

    Full Text Available Soft matter embodies a wide range of materials, which all share the common characteristics of weak interaction energies determining their supramolecular structure. This complicates structure-property predictions and hampers the direct application of data-driven approaches to their modeling. We present several aspects in which these methods play a role in designing soft-matter materials: drug design as well as information-driven computer simulations, e.g., histogram reweighting. We also discuss recent examples of rational design of soft-matter materials fostered by physical insight and assisted by data-driven approaches. We foresee the combination of data-driven and physical approaches a promising strategy to move the field forward.

  11. People and Buildings--a Brief Overview of Research. Exchange Bibliography No. 301.

    Science.gov (United States)

    Canter, David

    This bibliography and paper provide a brief overview of empirical studies that attempt to apply the insights of modern psychology to architecture. Items are discussed under headings of scientific research, methodology, perceptual studies, the use of space, interpersonal distance, personality development, learning, decision-related research, and…

  12. James C. McGroddy Prize for New Materials Lecture: New Superconductors and other Research in New Materials

    Science.gov (United States)

    Cava, Robert

    2012-02-01

    Superconductors and other electronic materials can often display subtle relationships between their structural characteristics and their electronic properties. Though the primary interest in these relationships is within the condensed matter physics community, often at their foundation are the concepts of bonding and structure familiar to inorganic and solid state chemists. Thus a hybridized view, combining physics and chemistry, is one way of approaching the discovery and characterization of new materials. In this talk I will describe some of our research in this context and comment on some broader aspects of interdisciplinary research in new materials.

  13. Material Research of Rotary Sealing Device for Combined Cutting System

    OpenAIRE

    Rui Zeng; Yong Zhang; Zhenrong Lin; Lulu Wang

    2017-01-01

    In order to solve the rotary sealing problem of rotary shaft in drum shearer combined cutting system, the material and structure of combined cutting system rotary sealing device needs to be selected and designed. In the paper, the rotary sealing structure of four grades in series was designed first, and then the material of NBR-40 and PTFE 4FT-4 under the separate static and dynamic sealing tests were carried out on the combined tooth-slip-ring sealing test-bed. The tests show that the NBR-40...

  14. JPRS Report, Science & Technology, Japan, STA Research on Superconducting Materials

    Science.gov (United States)

    1990-09-24

    currently possess a critical temperature (Tc) of more than 100 K , which is higher than the temperature of liquid nitrogen--77 K . This has been made possible...out that it is necessary to promote basic infrastructure research, utilize existing research development potentials, etc. 1 [ K ] [’C ] 120 TI-Ba-Ca-Cu-O...Laboratory Atsushi Nagai Manager Toshiba General Research Laboratory Aiko Hara Deputy R&D Division, Sumitomo Electric Indus- manager tries, Ltd. Harumi

  15. Cooperative Materials Research Projects - Student Research Program III. Student Research Program to AFRL/RX: A Summary of Various Materials Research Projects

    Science.gov (United States)

    2015-05-27

    real research as an undergraduate student has been helpful both in learning what research is like, and in supplementing classroom learning. Thanks...of the deoxyribonucleic acid biopolymer DNA-CTMA. As an intermediate goal towards fabrication of the Mach Zehnder device, a DNA-CTMA clad inverted ...core. Independent demonstration of optical modulation in a slab waveguide structure, together with waveguiding in an inverted ridge waveguide presents

  16. Revived beauty : Research into aesthetic appreciation of materials to valorise materials fromwaste

    NARCIS (Netherlands)

    Sauerwein, M.; Karana, E.; Rognoli, Valentina

    2017-01-01

    The use of materials derived from waste is one of the prominent ways to contribute to sustainable product design. However, there is a stark gap in literature concerning how people appraise such materials. In this paper, we present our initial attempts to understand the aesthetic appreciation of

  17. Fusion Materials Research at Oak Ridge National Laboratory in Fiscal Year 2016

    Energy Technology Data Exchange (ETDEWEB)

    Wiffen, Frederick W [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Katoh, Yutai [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Melton, Stephanie G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-12-01

    This document summarizes FY2016 activities supporting the Office of Science, Office of Fusion Energy Sciences Materials Research for MFE carried out by ORNL. The organization of the report is mainly by material type, with sections on specific technical activities.

  18. The National Shipbuilding Research Program: Producibility Cost Reductions through Alternative Materials and Processes

    National Research Council Canada - National Science Library

    Horsmon, Jr., Albert W; Johnson, Karl; Gans-Devney, Barbara

    1999-01-01

    This report describes research into the use of alternative materials and processes to reduce material and labor costs while also looking at the influence of these choices on the life cycle costs of the vessel...

  19. Materials Research for GHz Multi-Chip Modules

    Science.gov (United States)

    1993-09-30

    Publications: Laursen, K., Hertling, D., Berry, N., Bidstrup, S.A., Kohl, P., and Arroz , A., "Measurement of the Electrical Properties of Hligh Performance...Materials, Fall 1992. Herding, D.R., Laursen, K., Bidstrup, S.A., Kohl, P.A., Arroz , G.S.., "Measurement of the Electrical Properties of High

  20. Materials and Molecular Research Division. Annual report 1981

    Energy Technology Data Exchange (ETDEWEB)

    1982-08-01

    Progress is reported in the areas of materials sciences, chemical sciences, nuclear sciences, fossil energy, advanced (laser) isotope separation technology, energy storage, superconducting magnets, and nuclear waste management. Work for others included phase equilibria for coal gasification products and ..beta..-alumina electrolytes for storage batteries. (DLC)

  1. Research Perspectives for Material Requirements Planning Systems. Paper No. 434.

    Science.gov (United States)

    Berry, W. L.; Whybark, D. Clay

    Material requirements planning (MRP) systems are described as management tools for planning and controlling production operations. A wide variety of industries and production organizations are credited as reporting significant operating improvements in such areas as inventory control, production scheduling, delivery performance, and production…

  2. Materials and Molecular Research Division annual report 1982

    Energy Technology Data Exchange (ETDEWEB)

    1983-05-01

    This report is divided into: materials sciences, chemical sciences, nuclear sciences, fossil energy, advanced isotope separation technology (AISI), energy storage, magnetic fusion energy (MFE), nuclear waste management, and work for others (WFO). Separate abstracts have been prepared for all except AIST, MFE, and WFO. (DLC)

  3. 77 FR 55863 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-09-11

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Princeton... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National... information; financial data, such as salaries and personal information concerning individuals associated with...

  4. 77 FR 61433 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-10-09

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National... proprietary or confidential nature, including technical information; financial data, such as salaries and...

  5. University of Illinois at Urbana-Champaign, Materials Research Laboratory progress report for FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This interdisciplinary laboratory in the College of Engineering support research in areas of condensed matter physics, solid state chemistry, and materials science. These research programs are developed with the assistance of faculty, students, and research associates in the departments of Physics, Materials Science and Engineering, chemistry, Chemical Engineering, Electrical Engineering, Mechanical Engineering, and Nuclear Engineering.

  6. Research of efficiency of water purification-exchange resin from iron compounds using modified filter media

    OpenAIRE

    Gomel, Nikolai; Tverdokhlib, Mariia

    2016-01-01

    Recently, the modified media have become widely used in the processes of iron removal from water. These media are based on the natural granular material with a catalytically-active surface layer, which promotes a more efficient oxidation of iron ions. However, their application raises some problems associated with restoring their oxidative capacity, reliability and duration of use.The paper presents the results of removal of iron ions from water by catalytic oxidation. The method of modifying...

  7. Pu Anion Exchange Process Intensification

    Energy Technology Data Exchange (ETDEWEB)

    Taylor-Pashow, Kathryn M. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-10-06

    This research is focused on improving the efficiency of the anion exchange process for purifying plutonium. While initially focused on plutonium, the technology could also be applied to other ion-exchange processes. Work in FY17 focused on the improvement and optimization of porous foam columns that were initially developed in FY16. These foam columns were surface functionalized with poly(4-vinylpyridine) (PVP) to provide the Pu specific anion-exchange sites. Two different polymerization methods were explored for maximizing the surface functionalization with the PVP. The open-celled polymeric foams have large open pores and large surface areas available for sorption. The fluid passes through the large open pores of this material, allowing convection to be the dominant mechanism by which mass transport takes place. These materials generally have very low densities, open-celled structures with high cell interconnectivity, small cell sizes, uniform cell size distributions, and high structural integrity. These porous foam columns provide advantages over the typical porous resin beads by eliminating the slow diffusion through resin beads, making the anion-exchange sites easily accessible on the foam surfaces. The best performing samples exceeded the Pu capacity of the commercially available resin, and also offered the advantage of sharper elution profiles, resulting in a more concentrated product, with less loss of material to the dilute heads and tails cuts. An alternate approach to improving the efficiency of this process was also explored through the development of a microchannel array system for performing the anion exchange.

  8. A New Direction for the NASA Materials Science Research Using the International Space Station

    Science.gov (United States)

    Schlagheck, Ronald A.; Stinson, Thomas N. (Technical Monitor)

    2002-01-01

    In 2001 NASA created a fifth Strategic Enterprise, the Office of Biological and Physical Research (OBPR), to bring together physics, chemistry, biology, and engineering to foster interdisciplinary research. The Materials Science Program is one of five Microgravity Research disciplines within this new Enterprise's Division of Physical Sciences Research. The Materials Science Program will participate within this new enterprise structure in order to facilitate effective use of ISS facilities, target scientific and technology questions and transfer results for Earth benefits. The Materials Science research will use a low gravity environment for flight and ground-based research in crystallization, fundamental processing, properties characterization, and biomaterials in order to obtain fundamental understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. Completion of the International Space Station's (ISS) first major assembly, during the past year, provides new opportunities for on-orbit research and scientific utilization. The Enterprise has recently completed an assessment of the science prioritization from which the future materials science ISS type payloads will be implemented. Science accommodations will support a variety of Materials Science payload hardware both in the US and international partner modules with emphasis on early use of Express Rack and Glovebox facilities. This paper addresses the current scope of the flight and ground investigator program. These investigators will use the various capabilities of the ISS lab facilities to achieve their research objectives. The type of research and classification of materials being studied will be addressed. This includes the recent emphasis being placed on radiation shielding, nanomaterials, propulsion materials, and biomaterials type research. The Materials Science Program will pursue a new, interdisciplinary approach, which contributes, to Human

  9. The Materiality of Exclusion and the Ideology of Research

    DEFF Research Database (Denmark)

    Pais, Alexandre

    2013-01-01

    emphasis on discourse and identity politics, functions as the necessary ideology of current capitalist schooling, by the way it provides a fantasy screen enabling research to perform as if the problem of exclusion could be solved by changing discourses alone. I draw on Lacanian psychoanalysis, particularly....... The method used to analyze research can be called ideology critique, and is based on Žižek’s recent revitalization of this Marxist concept. It consists in showing the incongruities between the discourse emanating from research and its actualization within a life world context—in this case, schools. What...

  10. [Research progress of myocardial tissue engineering scaffold materials].

    Science.gov (United States)

    Fang, Yibing; Liao, Bin

    2011-03-01

    To review the current status and problems in the developing scaffolds for the myocardial tissue engineering application. The literature concerning the myocardial tissue engineering scaffold in recent years was reviewed extensively and summarized. As one of three elements for tissue engineering, a proper scaffold is very important for the proliferation and differentiation of the seeding cells. The naturally derived and synthetic extracellular matrix (ECM) materials aim to closely resemble the in vivo microenvironment by acting as an active component of the developing tissue construct in myocardial tissue engineering. With the advent and continuous refinement of cell removal techniques, a new class of native ECM has emerged with some striking advantages. Through using the principle of composite scaffold, computers and other high-technology nano-polymer technology, surface modification of traditional biological materials in myocardial tissue engineering are expected to provide ideal myocardial scaffolds.

  11. Material Research of Rotary Sealing Device for Combined Cutting System

    Directory of Open Access Journals (Sweden)

    Rui Zeng

    2017-01-01

    Full Text Available In order to solve the rotary sealing problem of rotary shaft in drum shearer combined cutting system, the material and structure of combined cutting system rotary sealing device needs to be selected and designed. In the paper, the rotary sealing structure of four grades in series was designed first, and then the material of NBR-40 and PTFE 4FT-4 under the separate static and dynamic sealing tests were carried out on the combined tooth-slip-ring sealing test-bed. The tests show that the NBR-40 O-Ring with PTFE 4FT-4 tooth-slip-ring has no low-pressure leakage problem and low leakage in the sealing progress, the sealing effect of which is the best.

  12. Progress in the research and application of polysaccharide hemostatic materials

    Directory of Open Access Journals (Sweden)

    Yi JIANG

    2015-01-01

    Full Text Available Local hemostasis is the first step in wound treatment, and effective hemostatic methods could reduce the number of unnecessary casualties. Hemostatic materials need to have good hemostatic properties, excellent biocompatibility, no toxic side effects, no irritation and easy to prepare. The polysaccharide has many advantages, including rich source, simple structures, absorbable and biodegradable, excellent biocompatibility. At present, it has been found that polysaccharide is easy to modify in structure and recombine. This paper summarizes the characteristics and products of polysaccharide hemostatic materials including celluloses, chitosans, alginate, hyaluronic acid, and starch in order to offer the indications for clinical application and further study. DOI: 10.11855/j.issn.0577-7402.2014.12.16

  13. NATO Advanced Research Workshop on Smart Materials for Ranging Systems

    CERN Document Server

    Franse, Jaap; Sirenko, Valentyna

    2006-01-01

    The problem of determining the location of an object (usually called ranging) attracts at present much attention in different areas of applications, among them in ecological and safety devices. Electromagnetic waves along with sound waves are widely used for these purposes. Different aspects of materials with specific magnetic, electric and elastic properties are considered in view of potential application in the design and manufacturing of smart materials. Progress is reported in the fabrication and understanding of in-situ formation and characterization of solid state structures with specified properties. Attention is paid to the observation and study of the mobility of magnetic structures and of the kinetics of magnetic ordering transitions. Looking from a different perspective, one of the outcomes of the ARW is the emphasis on the important role that collective phenomena (like spin waves in systems with a magnetically ordered ground state, or critical currents in superconductors) could play at the design ...

  14. NANO(materials): EHS, Research, INnovation, ReGulation

    OpenAIRE

    GOTTARDO STEFANIA; MECH AGNIESZKA; QUIROS PESUDO LAIA; CRUTZEN HUGUES

    2017-01-01

    This collection contains data, results, information and tools derived from research and institutional activities regarding the environment, health and safety matters for supporting sustainable innovation for regulatory purposes, with a focus on nanomaterials.

  15. Experiences of packaging research outputs into extension materials

    African Journals Online (AJOL)

    Mo

    constraints related to housing, markets, feeding, diseases, or pests. In cases where the constraints were specified ( ... transportation of produce to markets). Following these discussions, the information needs of ..... Spreading the Word: Disseminating research findings. Synthesis Note. Water, Engineering and Development.

  16. A short report on knowledge exchange through research-based theatre: 'inside out of mind'.

    Science.gov (United States)

    Schneider, Justine; Lowe, Stephen; Myers, Tanya; Scales, Kezia; Bailey, Simon; Middleton, Joanne

    2014-10-01

    The short report describes the development from page to stage of a work of theatre based on an ethnographic study. The originating research focused on the work of health care assistants (nurse's aides) whose direct impact on the quality of life of highly dependent people is often overlooked. The research followed hospital personnel on wards specialising in the 'challenging behaviour' associated with dementia in central England. Conventional research outputs failed to engage the health care assistants themselves, so we turned to theatre to remedy this. The development of the field notes into theatre was characterised by the artistic freedom given to the playwright, in contrast to more data-led approaches to theatre making. The account of the process of creating the play, Inside Out of Mind, is followed a description of how the work was received by specialist and general audiences totalling 2000+. The discussion seeks to locate the whole enterprise in relation to the field of research-based theatre and explores how the production and its associated learning events relate to definitions of research-based theatre in the light of recent attempts to encapsulate this broad and diverse methodology. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  17. Chemistry {ampersand} Materials Science progress report summary of selected research and development topics, FY97

    Energy Technology Data Exchange (ETDEWEB)

    Newkirk, L.

    1997-12-01

    This report contains summaries of research performed in the Chemistry and Materials Science division. Topics include Metals and Ceramics, High Explosives, Organic Synthesis, Instrument Development, and other topics.

  18. 78 FR 4464 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2013-01-22

    ... Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201... nature, including technical information; financial data, such as salaries and personal information...

  19. 78 FR 19535 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2013-04-01

    ... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science... proprietary or confidential nature, including technical information; financial data, such as salaries and...

  20. Comparison of organic and inorganic ion exchange materials for removal of cesium and strontium from tank waste

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-10-01

    This work is part of an ESP task to develop high-capacity, selective, solid extractants for cesium, strontium, and technetium from nuclear wastes. Pacific Northwest National Laboratory (PNNL) staff are investigating novel ion exchangers for use in nuclear waste remediation (groundwater, high-level waste (HLW), and low-level waste (LLW)). Waste components targeted for remediation include cesium, strontium, and technetium.

  1. Chemistry and materials science progress report. Weapons-supporting research and laboratory directed research and development: FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This report covers different materials and chemistry research projects carried out a Lawrence Livermore National Laboratory during 1995 in support of nuclear weapons programs and other programs. There are 16 papers supporting weapons research and 12 papers supporting laboratory directed research.

  2. Design and Development of a Sub-Zero Fluid System for Demonstration of Orion's Phase Change Material Heat Exchangers on ISS

    Science.gov (United States)

    Sheth, Rubik B.; Ahlstrom, Thomas D.; Le, Hung V.

    2016-01-01

    NASA's Orion Multipurpose Crew Vehicle's Exploration Mission 2 is expected to loiter in Lunar orbit for a relatively long period of time. In low Lunar orbit (LLO) the thermal environment is cyclic - extremely cold in the eclipse and relatively hot near the subsolar point. Phase change material heat exchangers (PCM HXs) are the best option for long term missions in these environments. A PCM HX allows a vehicle to store excess waste energy by thawing a phase change material such as n-pentadecane wax. During portions of the orbit that are extremely cold, the excess energy is rejected, resolidifying the wax. Due to the inherent risk of compromising the heat exchanger during multiple freeze and thaw cycles, a unique payload was designed for the International Space Station to test and demonstration the functions of a PCM HX. The payload incorporates the use of a pumped fluid system and a thermoelectric heat exchanger to promote the freezing and thawing of the PCM HX. This paper shall review the design and development undertaken to build such a system.

  3. A New Direction for NASA Materials Science Research Using the International Space Station

    Science.gov (United States)

    Schlagheck, Ronald; Trach, Brian; Geveden, Rex D. (Technical Monitor)

    2001-01-01

    NASA recently created a fifth Strategic Enterprise, the Office of Biological and Physical Research (OBPR), to bring together physics, chemistry, biology, and engineering to foster interdisciplinary research. The Materials Science Program is one of five Microgravity Research disciplines within this new enterprise's Division of Physical Sciences Research. The Materials Science Program will participate within this new enterprise structure in order to facilitate effective use of ISS facilities, target scientific and technology questions and transfer scientific and technology results for Earth benefits. The Materials Science research will use a low gravity environment for flight and ground-based research in crystallization, fundamental processing, properties characterization, and biomaterials in order to obtain fundamental understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. Completion of the International Space Station's (ISS) first major assembly, during the past year, provides new opportunities for on-orbit research and scientific utilization. Accommodations will support a variety of Materials Science payload hardware both in the US and international partner modules with emphasis on early use of Express Rack and Glovebox facilities. This paper addresses the current scope of the flight investigator program. These investigators will use the various capabilities of the ISS to achieve their research objectives. The type of research and classification of materials being studied will be addressed. This includes the recent emphasis being placed on nanomaterials and biomaterials type research. Materials Science Program will pursue a new, interdisciplinary approach, which contributes, to Human Space Flight Exploration research. The Materials Science Research Facility (MSRF) and other related American and International experiment modules will serve as the foundation for this research. Discussion will be

  4. [Research progress of Chinese herbal medicine raw materials in cosmetics].

    Science.gov (United States)

    Xie, Yan-jun; Kong, Wei-jun; Yang, Mei-hua; Yang, Shi-hai

    2015-10-01

    Advocating green, nature, environmental protection, safety and the pursuit of efficacy are the trends of cosmetics in the world. In recent years, more and more Chinese herbal extracts with mild, high safety and small irritation are applied to cosmetics as the natural additives. This has become a new hot spot. The recent application advances of Chinese medicine raw materials in cosmetics are overviewed according to their main functions. This review will provide useful references for the future development and application of Chinese medicinal herbs cosmetics.

  5. Basic research needs and opportunities on interfaces in solar materials

    Energy Technology Data Exchange (ETDEWEB)

    Czanderna, A. W.; Gottschall, R. J. [eds.

    1981-04-01

    The workshop on research needs and recommended research programs on interfaces in solar energy conversion devices was held June 30-July 3, 1980. The papers deal mainly with solid-solid, solid-liquid, and solid-gas interfaces, sometimes involving multilayer solid-solid interfaces. They deal mainly with instrumental techniques of studying these interfaces so they can be optimized, so they can be fabricated with quality control and so changes with time can be forecast. The latter is required because a long lifetime (20 yrs is suggested) is necessary for economic reasons. Fifteen papers have been entered individually into EDB and ERA. (LTN)

  6. Smart Materials in the Netherlands. From fundamental research to innovative societal applications; Smart Materials in Nederland. Van Fundamenteel Onderzoek naar Innovatieve Maatschappelijke Toepassingen

    Energy Technology Data Exchange (ETDEWEB)

    Callant, C.

    2012-11-15

    Research in the field of smart materials in the Netherlands is subdivided into structural materials research and functional materials research. In addition, it shows a breakdown by type of material: metals, polymers and composites. Netherlands is particularly active in a number of sub-areas carries out research on a global level, such as selfhealing materials and biomimetic materials [Dutch] Onderzoek op het gebied van slimme materialen wordt in Nederland onderverdeeld in constructief materiaalonderzoek en functioneel materiaalonderzoek. Daarnaast kent men een onderverdeling naar soort materiaal: metalen, polymeren en composieten. Nederland is op een aantal deelgebieden bijzonder actief en voert daarbij onderzoek uit op wereldniveau, zoals selfhealing materials en biomimetic materials.

  7. Research and development on materials for the SPES target

    Directory of Open Access Journals (Sweden)

    Corradetti Stefano

    2014-03-01

    Full Text Available The SPES project at INFN-LNL (Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro is focused on the production of radioactive ion beams. The core of the SPES facility is constituted by the target, which will be irradiated with a 40 MeV, 200 µA proton beam in order to produce radioactive species. In order to efficiently produce and release isotopes, the material constituting the target should be able to work under extreme conditions (high vacuum and temperatures up to 2000 °C. Both neutron-rich and proton-rich isotopes will be produced; in the first case, carbon dispersed uranium carbide (UCx will be used as a target, whereas to produce p-rich isotopes, several types of targets will have to be irradiated. The synthesis and characterization of different types of material will be reported. Moreover, the results of irradiation and isotopes release tests on different uranium carbide target prototypes will be discussed.

  8. [Clinical research on repairing alveolar cleft with osteoinduction active material].

    Science.gov (United States)

    She, Xiao-ming; Zhang, Qian; Tian, Kun; Yang, Li; Xiong, Gui-fa

    2010-08-01

    To study the feasibility and authenticity of repairing alveolar defects in alveolar cleft patients with osteoinduction active material (OAM) in clinic. Twenty-seven cases of alveolar defect chosen from clinic were divided into two groups (test group and control group). For test group (12 cases), OAM was transplanted to repair the alveolar cleft. For control group (15 cases), autogenous ilium cancellous bone were transplanted into the defect region to repair alveolar cleft. At 6 months after operation, CT and three-dimensional reconstruction were used to observe alveolar appearance, and the effect and clinical success rate of recover alveolar cleft by using different repair material were compared. In the 27 cases, all the maxillary continuity was restored except two of test group and two of control group. There was no significant difference between test group and control group regarding the clinical success rate of the alveolar cleft repair (P = 1.000). OAM was used to repair the alveolar cleft that can result in new bone formations and the burgeon of canines from the bone grafted areas. There is no significant difference between OAM and autogenous ilium cancellous bone regarding the effect of the alveolar cleft repair.

  9. Nuclear-Fuel-Cycle Research Program: availability of geotoxic material

    Energy Technology Data Exchange (ETDEWEB)

    Wachter, B.G.; Kresan, P.L.

    1982-09-01

    This report represents an analog approach to the characterization of the environmental behavior of geotoxic waste materials (toxic material emplaced in the earth's crust) as drawn from literature on the Oklo natural fission reactors and uranium ore deposits relative to radioactive wastes, and hydrothermal metal ore deposits relative to stable toxic wastes. The natural analog data were examined in terms of mobility and immobility of selected radioactive or stable waste elements and are presented in matrix relationship with their prime geochemical variables. A numerical system of ranking those relationships for purposes of hazard-indexing is proposed. Geochemical parameters (especially oxidation/reduction potential) are apparently more potent mobilizers/immobilizers than geological or hydrological conditions in many, if not most, geologic environments for most radioactive waste elements. Heavy metal wastes, by analogy to hydrothermal ore systems and geothermal systems, are less clear in their behavior but similar geochemical patterns do apply. Depth relationships between geochemical variables and waste element behavior show some surprises. It is significantly indicated that for waste isolation, deeper is not necessarily better geochemically. Relatively shallow isolation in host rocks such as shale could offer maximum immobility. This paper provides a geochemical outline for examining analog models as well as a departure point for improved quantification of geological and geochemical indexing of toxic waste hazards.

  10. OVERVIEW OF EUCARD ACCELERATOR AND MATERIAL RESEARCH AT GSI

    CERN Document Server

    Stadlmann, J; Kollmus, H; Mustafin, E; Pyka, N; Spiller, P; Strasik, I; Tahir, N A; Tomut, M; Trautmann, C

    2011-01-01

    EuCARD is a joined accelerator R&D initiative funded by the EU. Within this program, GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt is performing R&D on materials for accelerators and collimators in workpackage 8 (ColMat). GSI covers prototyping and testing of a cryogenic ion catcher for FAIR’s main synchrotron SIS100, simulations and studies on activation of accelerator components e.g. halo collimatiors as well as irradiation experiments on materials foreseen to be used in FAIR accelerators and the LHC upgrade program. Carbon-carbon composites, silicon carbide and copper-diamond composite samples have been irradiated with heavy ions at various GSI beamlines and their radiation induced property changes were characterized. Numerical simulations on the possible damage by LHC and SPS beams to different targets have been performed. Simulations and modelling of activation and long term radiation induced damage to accelerator components have started. A prototype ion catcher has been built and...

  11. Effectiveness of the Picture Exchange Communication System as a Functional Communication Intervention for Individuals with Autism Spectrum Disorders: A Practice-Based Research Synthesis

    Science.gov (United States)

    Tien, Kai-Chien

    2008-01-01

    This research synthesis verifies the effectiveness of the Picture Exchange Communication System (PECS) for improving the functional communication skills of individuals with autism spectrum disorders (ASD). The research synthesis was focused on the degree to which variations in PECS training are associated with variations in functional…

  12. Analytical SuperSTEM for extraterrestrial materials research

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, J P; Dai, Z R

    2009-09-08

    Electron-beam studies of extraterrestrial materials with significantly improved spatial resolution, energy resolution and sensitivity are enabled using a 300 keV SuperSTEM scanning transmission electron microscope with a monochromator and two spherical aberration correctors. The improved technical capabilities enable analyses previously not possible. Mineral structures can be directly imaged and analyzed with single-atomic-column resolution, liquids and implanted gases can be detected, and UV-VIS optical properties can be measured. Detection limits for minor/trace elements in thin (<100 nm thick) specimens are improved such that quantitative measurements of some extend to the sub-500 ppm level. Electron energy-loss spectroscopy (EELS) can be carried out with 0.10-0.20 eV energy resolution and atomic-scale spatial resolution such that variations in oxidation state from one atomic column to another can be detected. Petrographic mapping is extended down to the atomic scale using energy-dispersive x-ray spectroscopy (EDS) and energy-filtered transmission electron microscopy (EFTEM) imaging. Technical capabilities and examples of the applications of SuperSTEM to extraterrestrial materials are presented, including the UV spectral properties and organic carbon K-edge fine structure of carbonaceous matter in interplanetary dust particles (IDPs), x-ray elemental maps showing the nanometer-scale distribution of carbon within GEMS (glass with embedded metal and sulfides), the first detection and quantification of trace Ti in GEMS using EDS, and detection of molecular H{sub 2}O in vesicles and implanted H{sub 2} and He in irradiated mineral and glass grains.

  13. Performance evaluation of 24 ion exchange materials for removing cesium and strontium from actual and simulated N-Reactor storage basin water

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.N.; Carson, K.J.; DesChane, J.R.; Elovich, R.J.

    1997-09-01

    This report describes the evaluation of 24 organic and inorganic ion exchange materials for removing cesium and strontium from actual and simulated waters from the 100 Area 105 N-Reactor fuel storage basin. The data described in this report can be applied for developing and evaluating ion exchange pre-treatment process flowsheets. Cesium and strontium batch distribution ratios (K{sub d}`s), decontamination factors (DF), and material loadings (mmol g{sup -1}) are compared as a function of ion exchange material and initial cesium concentration. The actual and simulated N-Basin waters contain relatively low levels of aluminum, barium, calcium, potassium, and magnesium (ranging from 8.33E-04 to 6.40E-05 M), with slightly higher levels of boron (6.63E-03 M) and sodium (1.62E-03 M). The {sup 137}Cs level is 1.74E-06 Ci L-{sup 1} which corresponds to approximately 4.87E-10 M Cs. The initial Na/Cs ratio was 3.33E+06. The concentration of total strontium is 4.45E-06 M, while the {sup 90}Sr radioactive component was measured to be 6.13E-06 Ci L{sup -1}. Simulant tests were conducted by contacting 0.067 g or each ion exchange material with approximately 100 mL of either the actual or simulated N-Basin water. The simulants contained variable initial cesium concentrations ranging from 1.00E-04 to 2.57E- 10 M Cs while all other components were held constant. For all materials, the average cesium K{sub d} was independent of cesium concentration below approximately 1.0E-06 M. Above this level, the average cesium K{sub d} values decreased significantly. Cesium K{sub d} values exceeding 1.0E+07 mL g{sup -1} were measured in the simulated N-Basin water. However, when measured in the actual N-Basin water the values were several orders of magnitude lower, with a maximum of 1.24E+05 mL g{sup -1} observed.

  14. Autonomy in Materials Research: A Case Study in Carbon Nanotube Growth (Postprint)

    Science.gov (United States)

    2016-10-21

    effectively make use of the explosion in data generation. However, neither automation nor Integrated Computational Materials Science and Engineering...PARTNER JOURNALS (STINFO COPY) AIR FORCE RESEARCH LABORATORY MATERIALS AND MANUFACTURING DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE, OH 45433...Laboratory Materials and Manufacturing Directorate Wright-Patterson Air Force Base, OH 45433-7750 Air Force Materiel Command United States Air Force AFRL

  15. Project to promote the technical development of global environmental industries. International research exchange project; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Exchanges with researchers/research institutes in overseas countries have an important meaning in promoting the research and development toward the creation of new research fields where the solution to the environmental problem is aimed at and toward the construction of new technological systems. Therefore, under the cooperation of Research Institute of Innovative Technology for the Earth (RITE), and RITE related researchers and societies, given were invitation and dispatch of researchers to international conferences and symposia involved in the global environment related technology, and exchanges with major overseas research institutes/universities. At the same time, based on the short-term invitation and dispatch so far given, a system was established for medium- and long-term dispatch/invitation of researchers who are thought to hold an important position in the future research activities. From the results obtained, domestic and foreign exchanges relating to the latest research could be promoted. In addition, researches in the basic domain related to the global environmental technology were advanced in a variety of fields overseas. The numbers of invitation and dispatch given in fiscal 1995 were 12 and 13, respectively, the results of which were included in this paper. 121 refs., 74 figs., 11 tabs.

  16. An experimental and numerical study of a jetfire stop material and a new helical flow heat exchanger

    Energy Technology Data Exchange (ETDEWEB)

    Austegard, Anders

    1997-12-31

    This thesis consists of two parts. Part 1: Experimental and numerical study of jetfire stop, and Part 2: Experimental and numerical study of a new kind of shell and tube heat exchanger with helical flow on shell side. Part 1 describes the development of the model for simulation of the temperature development through Viking jetfirestop. A simulation program is developed that calculates the temperature development through Viking jetfire stop. In the development of the model, measurements of reaction energy, pyrolysis and heat conductivity at low temperatures are made. The conductivity at higher temperatures and when pyrolysis reactions are going on is estimated experimentally and by numerical calculations. Full-scale jet fire test and small-scale xenon lamp experiments are made to test the simulation model. Part 2 contains the development of a model that simulate the fluid flow and heat transfer in a helical flow shell and tube heat exchanger. It consists of the development of a porosity model and a model for pressure drop and heat transfer as well as experiments in non-standard tube layouts. Results from the simulation program are compared with experiments on a helical flow shell and tube heat exchanger. There is a separate appendix volume. 62 refs., 152 figs., 22 tabs.

  17. Hydrogen/deuterium exchange, a unique and effective method for MS fragmentation behavior elucidation of ginkgolides and its application to systematic research in Ginkgo biloba.

    Science.gov (United States)

    Niu, Xingliang; Luo, Jun; Xu, Deran; Zou, Hongyan; Kong, Lingyi

    2017-02-05

    Ginkgolides, the main active constituents of Ginkgo biloba, possess significant selectively inhibition on platelet-activating factor and pancreatic lipase and attract wide attention in pharmacological research area. In our study, an effective hydrogen/deuterium (H/D) exchange method was developed by exchanging the α-Hs of lactone groups in ginkgolides with Ds, which was very useful for the elucidation of the fragmentation patterns of ginkgolides in Quadrupole Time-of-flight Mass Spectrometry (Q-TOF-MS), especially in accurately distinguishing the type and position of substituent in framework of ginkgolides. Then, a systematic research strategy for qualitative and quantitative analysis of ginkgolides, based on H/D exchange, tandem solid-phase extraction and LC-Q-TOF-MS, was developed, which was successfully applied in each medicinal part of G. biloba, which indicated that ginkgolide B was the most abundant ginkgolide in the seeds of G. biloba (60.6μg/g). This research was the successful application of H/D exchange in natural products, and proved that H/D exchange is a potential method for analysis research of complex TCMs active constituents. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. 75 FR 34769 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2010-06-18

    ... Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal Advisory...: Name: Site Visit review of the Nanoscale Science and Engineering Center (NSEC) at the University of... Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

  19. Current research trends and perspectives on materials-based hydrogen storage solutions: A critical review

    CSIR Research Space (South Africa)

    Ren, Jianwei

    2016-01-01

    Full Text Available Effective hydrogen storage solutions have been pursued for decades, and materials-based hydrogen storage is a research frontier of much current interest. Yet, no researched materials to date have come close to the DOE 2020 targets for hydrogen...

  20. 77 FR 19362 - Proposal Review Panel for Materials Research, Notice of Meeting

    Science.gov (United States)

    2012-03-30

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the.... Jones, Program Director, Materials Research Science and Engineering Centers Program, Division of...; financial data, such as salaries and personal information concerning individuals associated with the MRSEC...

  1. 77 FR 6826 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-02-09

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the... and Engineering Centers Program, Division of Materials Research, Room 1065, National Science... information of a proprietary or confidential nature, including technical information; financial data, such as...

  2. 75 FR 18240 - Proposal Review Panel for Materials Research Notice of Meeting

    Science.gov (United States)

    2010-04-09

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Brandeis...: Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of... confidential nature, including technical information; financial data, such as salaries and personal information...

  3. 77 FR 57161 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-09-17

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Brandeis.... Contact Person: Dr. Mary E. Galvin, Program Director, Materials Research Science and Engineering Centers... proprietary or confidential nature, including technical information; financial data, such as salaries and...

  4. 77 FR 14441 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-03-09

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at New York... Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201... technical information; financial data, such as salaries and personal information concerning individuals...

  5. 75 FR 4876 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2010-01-29

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at the Georgia... Person: Dr. Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program... confidential nature, including technical information; financial data, such as salaries and personal information...

  6. 77 FR 57162 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-09-17

    ...: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at The Ohio... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science... include information of a proprietary or confidential nature, including technical information; financial...

  7. 77 FR 29696 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-05-18

    ... Research Science and Engineering Center (MRSEC) at the University of Chicago by the Division of Materials... Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201... technical information; financial data, such as salaries and personal information concerning individuals...

  8. Educative Curriculum Materials: Uptake, Impact, and Implications for Research and Design

    Science.gov (United States)

    Davis, Elizabeth A.; Palincsar, Annemarie Sullivan; Smith, P. Sean; Arias, Anna Maria; Kademian, Sylvie M.

    2017-01-01

    The authors synthesize the findings of a research project to extend what is known about educative curriculum materials, or curriculum materials designed with the intent of supporting teacher learning as well as student learning. Drawing on a three-year program of research, including several close observational case studies and a large-scale…

  9. Designing a knowledge transfer and exchange strategy for the Alberta Depression Initiative: contributions of qualitative research with key stakeholders

    Directory of Open Access Journals (Sweden)

    Mitton Craig

    2009-06-01

    Full Text Available Abstract Background Depressive disorders are highly prevalent and of significant societal burden. In fall 2004, the 'Alberta Depression Initiative' (ADI research program was formed with a mission to enhance the mental health of the Alberta population. A key expectation of the ADI is that research findings will be effectively translated to appropriate research users. To help ensure this, one of the initiatives funded through the ADI focused specifically on knowledge transfer and exchange (KTE. The objectives of this project were first to examine the state of the KTE literature, and then based on this review and a set of key informant interviews, design a KTE strategy for the ADI. Methods Face to face interviews were conducted with 15 key informants familiar with KTE and/or mental health policy and programs in Alberta. Interviews were transcribed and analyzed using the constant comparison method. Results This paper reports on findings from the qualitative interviews. Respondents were familiar with the barriers to and facilitators of KTE as identified in the existing literature. Four key themes related to the nature of effective KTE were identified in the data analysis: personal relationships, cultivating champions, supporting communities of practice, and building receptor capacity. These recommendations informed the design of a contextually appropriate KTE strategy for the ADI. The three-phased strategy involves preliminary research, public workshops, on-going networking and linkage activities and rigorous evaluation against pre-defined and mutually agreed outcome measures. Conclusion Interest in KTE on the part of ADI has led to the development of a strategy for engaging decision makers, researchers, and other mental health stakeholders in an on-going network related to depression programs and policy. A similarly engaged process might benefit other policy areas.

  10. Smart Materials and Structures Applications at the NASA Langley Research Center

    Science.gov (United States)

    Horner, Garnett

    1996-01-01

    This overview of the presentation covers Langley's smart materials infrastructure, materials research, applications, and summary. Langley's infrastructure consists of fabrication and characterization of smart structures. Materials researched include ceramics, polymers, and polymer-ceramic composites. Applications include interior aircraft noise suppression, aircraft engine noise reduction, active flutter damping of aircraft wings for better performance, active shape control of polymeric reflectors, and aircraft wing distortion to eliminate control surfaces.

  11. Optical Material Researches for Frontier Optical Ceramics and Visible Fiber Laser Technologies

    Science.gov (United States)

    2016-07-07

    AFRL-AFOSR-JP-TR-2016-0059 Optical material researches for frontier optical ceramics and visible fiber laser technologies Yasushi Fujimoto Osaka...07-2016 2. REPORT TYPE Final 3. DATES COVERED (From - To) 18 Apr 2013 to 17 Apr 2016 4. TITLE AND SUBTITLE Optical material researches for frontier...are very useful for scientific and industrial applications. 15. SUBJECT TERMS Fibre Lasers, Laser Dynamics, Nonlinear Optical Materials 16. SECURITY

  12. Effects of Air Pollution on Materials and Cultural Heritage: ICP Materials Celebrates 25 Years of Research

    Directory of Open Access Journals (Sweden)

    Johan Tidblad

    2012-01-01

    Full Text Available An overview is given of all results from the International Co-operative Programme on Effects on Materials including Historic and Cultural Monuments (ICP Materials, which was launched in 1985. Since then, about twenty different materials have been exposed repeatedly in a network of test sites consisting of more than twenty sites with an extensive environmental characterisation and more than sixty official reports have been issued. Recent results on trends in corrosion, soiling, and pollution show that corrosion of carbon steel, zinc, and limestone is today substantially lower than 25 years ago, but while corrosion of carbon steel has decreased until today, corrosion of zinc and limestone has remained more or less constant since the turn of the century. Unique data are given on measured HNO3 concentrations from 2002-2003, 2005-2006, and 2008-2009, and the relative average decrease was about the same from 2002-2003 to 2005-2006 as it was from 2005-2006 to 2008-2009.

  13. European seismological data exchange, access and processing: current status of the Research Infrastructure project NERIES

    Science.gov (United States)

    Giardini, D.; van Eck, T.; Bossu, R.; Wiemer, S.

    2009-04-01

    The EC Research infrastructure project NERIES, an Integrated Infrastructure Initiative in seismology for 2006-2010 has passed its mid-term point. We will present a short concise overview of the current state of the project, established cooperation with other European and global projects and the planning for the last year of the project. Earthquake data archiving and access within Europe has dramatically improved during the last two years. This concerns earthquake parameters, digital broadband and acceleration waveforms and historical data. The Virtual European Broadband Seismic Network (VEBSN) consists currently of more then 300 stations. A new distributed data archive concept, the European Integrated Waveform Data Archive (EIDA), has been implemented in Europe connecting the larger European seismological waveform data. Global standards for earthquake parameter data (QuakeML) and tomography models have been developed and are being established. Web application technology has been and is being developed to make a jump start to the next generation data services. A NERIES data portal provides a number of services testing the potential capacities of new open-source web technologies. Data application tools like shakemaps, lossmaps, site response estimation and tools for data processing and visualisation are currently available, although some of these tools are still in an alpha version. A European tomography reference model will be discussed at a special workshop in June 2009. Shakemaps, coherent with the NEIC application, are implemented in, among others, Turkey, Italy, Romania, Switzerland, several countries. The comprehensive site response software is being distributed and used both inside and outside the project. NERIES organises several workshops inviting both consortium and non-consortium participants and covering a wide range of subjects: ‘Seismological observatory operation tools', ‘Tomography', ‘Ocean bottom observatories', 'Site response software training

  14. Knowledge exchange in the Pacific: The TROPIC (Translational Research into Obesity Prevention Policies for Communities project

    Directory of Open Access Journals (Sweden)

    Mavoa Helen

    2012-07-01

    Full Text Available Abstract Background Policies targeting obesogenic environments and behaviours are critical to counter rising obesity rates and lifestyle-related non-communicable diseases (NCDs. Policies are likely to be most effective and enduring when they are based on the best available evidence. Evidence-informed policy making is especially challenging in countries with limited resources. The Pacific TROPIC (Translational Research for Obesity Prevention in Communities project aims to implement and evaluate a tailored knowledge-brokering approach to evidence-informed policy making to address obesity in Fiji, a Pacific nation challenged by increasingly high rates of obesity and concomitant NCDs. Methods The TROPIC project draws on the concept of ‘knowledge exchange’ between policy developers (individuals; organisations and researchers to deliver a knowledge broking programme that maps policy environments, conducts workshops on evidence-informed policy making, supports the development of evidence-informed policy briefs, and embeds evidence-informed policy making into organisational culture. Recruitment of government and nongovernment organisational representatives will be based on potential to: develop policies relevant to obesity, reach broad audiences, and commit to resourcing staff and building a culture that supports evidence-informed policy development. Workshops will increase awareness of both obesity and policy cycles, as well as develop participants’ skills in accessing, assessing and applying relevant evidence to policy briefs. The knowledge-broking team will then support participants to: 1 develop evidence-informed policy briefs that are both commensurate with national and organisational plans and also informed by evidence from the Pacific Obesity Prevention in Communities project and elsewhere; and 2 collaborate with participating organisations to embed evidence-informed policy making structures and processes. This knowledge broking initiative

  15. Application of the ATOMKI-ECRIS for materials research

    Directory of Open Access Journals (Sweden)

    S. Biri

    2009-05-01

    Full Text Available In the ATOMKI ECRIS Laboratory long-termprojects were initiated to investigate basic properties of highcharged ions and use heavy ion beams and plasmas formaterials research, including the nanotechnology as well asto explore the possibility of industrial or medical applicationsof such ion treatments. In this paper a brief review of somenew experimental possibilities and applications is presented.The ECR ion source was further developed towardsirradiation of solid surfaces with highly charged ions or evenfullerenes. Experiments on interaction of such plasma withtitanium surface were performed with an aim of its biofunctionalization.The modification of functional amorphouschalcogenide layer surfaces by highly charged argon andxenon ions was also investigated with aim to establish basicmechanism of such processes and to develop new possibilitiesof nanofabrication.

  16. Review of the international symposium, sister chromatid exchanges: twenty-five years of experimental research

    Energy Technology Data Exchange (ETDEWEB)

    Tice, R.R.; Lambert, B.; Morimoto, Kanehisa; Hollaender, A.

    1983-01-01

    The purpose of this symposium was to honor initial research at Brookhaven by bringing internationally recognized leaders in the fields of genetics, cytogenetics, carcinogenesis, mutagenesis, radiation biology, toxicology, and environmental health together into an open forum to present and discuss: (1) current knowledge of the induction and formation of SCEs and their relationship to other biological endpoints, including carcinogenesis, mutagenesis, transformation, clastogenesis, DNA damage and repair, and cellular toxicity; (2) the optimal strategies for the utilization of SCEs in genetic toxicology testing schemes involving in vitro and in vivo exposure situations; (3) the most valid statistical methods for analyzing SCE data obtained from cells in culture, from cells in intact organisms, and from cells in humans; (4) the relevance of SCEs as an indicator of human disease states, both inherited and acquired, and of progress in disease treatment; and (5) the use of SCEs as an indicator of human exposure to genotoxic agents and their relevance as a prognosticator of future adverse health outcomes. This report summarizes the presentations. 7 references. (ACR)

  17. Research and Application Progress of Silicone Rubber Materials in Aviation

    Directory of Open Access Journals (Sweden)

    HUANG Yanhua

    2016-06-01

    Full Text Available The research progress of heat resistance, cold resistance, electrical conductivity and damping properties of aviation silicone rubber were reviewed in this article. The heat resistance properties of silicone rubber can be enhanced by changing the molecular structure (main chain, end-group, side chain and molecular weight of the gum and adding special heat-resistance filler. The cold resistance of aviation silicone rubber can be enhanced by adjusting the side chain molecular structure of the gum and the content of different gum chain. The electrical conductivity of silicone rubber can be improved by optimizing, blending and dispersing of conductive particles. The damping property of silicone rubber can be improved by designing and synthesizing of high-molecular polysiloxane damping agent. Furthermore, the application of aviation silicone rubber used in high-low temperature seal, electrical conduction and vibration damping technology are also summarized, and the high performance (for example long-term high temperature resistance, ultralow temperature resistance, high electromagnetic shelding, long-term fatigue resistance vibration damping, quasi constant modulus and so on of special silicone rubber is the future direction of aviation silicone rubber.

  18. Materials Research for Advanced Inertial Instrumentation. Task 1. Dimensional Stability of Gyro Structural Materials

    Science.gov (United States)

    1980-06-01

    10. The ramps are indepen- dent of instrument orientation to gravity vector and although the magni- tude of scale factors vary somewhat from...Livermore, CA 94550 Institute for Fracture and Solid Mechanics Dr. Frank Gardner Bethlehem , PA 18015 Acting Scientific Director Office of Naval Research

  19. Determining the sign of exchange coupling in a chromia based perpendicular exchange bias heterostructure

    Science.gov (United States)

    Singh, Uday; Street, Mike; Echtenkamp, Will; Binek, Christian; Adenwalla, Shireen

    Exchange bias arises from the coupling at the AFM/FM interface and, has been observed and studied in a wide range of systems. A key property of exchange bias systems is the sign of the coupling between the ferromagnet spins and the interfacial antiferromagnet spins, which may be aligned either ferromagnetically (parallel) or antiferromagnetically (antiparallel). Antiferromagnetic exchange coupling is known to be the generic cause of positive exchange bias. Determining the sign of exchange coupling is straight forward in system where the coupling is weak and can be overcome by Zeeman energy on field -cooling. It is, however, a challenging task when the available magnetic field is low or the magnitude of the exchange coupling is high. Here, we present a technique to determine the sign of the exchange coupling using low fields. We measure the exchange bias field as a function of ferromagnet magnetization during field cooling and the resultant behavior of the exchange bias vs. the magnetization uniquely determines the sign of the coupling. We use this to measure the sign of the exchange coupling in a Cr2O3(300 nm)/Pd(0.5 nm)/[Co(0.3 nm)/Pd(1 nm)]3 heterostructure thin film system and verify our results with the conventional high field method. This work was supported by the National Science Foundation (NSF) through Grant No. DMR-1409622 and the Nebraska Materials Research Science and Engineering Center (MRSEC) (Grant No. DMR-1420645).

  20. The NASA Materials Science Research Program - It's New Strategic Goals and Plans

    Science.gov (United States)

    Schlagheck, Ronald A.

    2003-01-01

    In 2001, the NASA created a separate science enterprise, the Office of Biological and Physical Research (OBPR), to perform strategical and fundamental research bringing together physics, chemistry, biology, and engineering to solve problems needed for future agency mission goals. The Materials Science Program is one of basic research disciplines within this new Enterprise's Division of Physical Sciences Research. The Materials Science Program participates to utilize effective use of International Space Station (ISS) experimental facilities, target new scientific and technology questions, and transfer results for Earth benefits. The program has recently pursued new investigative research in areas necessary to expand NASA knowledge base for exploration of the universe, some of which will need access to the microgravity of space. The program has a wide variety of traditional ground and flight based research related types of basic science related to materials crystallization, fundamental processing, and properties characterization in order to obtain basic understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. A summary of the types and sources for this research is presented and those experiments planned for the space. Areas to help expand the science basis for NASA future missions are described. An overview of the program is given including the scope of the current and future NASA Research Announcements with emphasis on new materials science initiatives. A description of the planned flight experiments to be conducted on the International Space Station program along with the planned facility class Materials Science Research Rack (MSRR) and Microgravity Glovebox (MSG) type investigations.

  1. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  2. The Influence of Materials Science and Engineering Undergraduate Research Experiences on Public Communication Skills

    Science.gov (United States)

    Ing, Marsha; Fung, Wenson W.; Kisailus, David

    2013-01-01

    Communicating research findings with others is a skill essential to the success of future STEM professionals. However, little is known about how this skill can be nurtured through participating in undergraduate research. The purpose of this study is to quantify undergraduate participation in research in a materials science and engineering…

  3. A Place for Materials Science: Laboratory Buildings and Interdisciplinary Research at the University of Pennsylvania

    Science.gov (United States)

    Choi, Hyungsub; Shields, Brit

    2015-01-01

    The Laboratory for Research on the Structure of Matter (LRSM), University of Pennsylvania, was built in 1965 as part of the Advanced Research Projects Agency's (ARPA) Interdisciplinary Laboratories (IDL) program intended to foster interdisciplinary research and training in materials science. The process that led to the construction of the…

  4. Collaborative Relationships in Dental Materials Research: Measuring the Volume and Outcomes.

    Science.gov (United States)

    Garrison, Howard H.; And Others

    1992-01-01

    Collaborative relationships between researchers and resources from government, industry, and academia were studied through a survey of research into dental materials. The outcomes of research conducted under various arrangements by 386 targeted respondents were reviewed. Implications of the high rate of collaboration for both industry and academia…

  5. Applied solid state science advances in materials and device research 2

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 2 covers topics about complex oxide materials such as the garnets, which dominate the field of magnetoelasticity and are among the most important laser hosts, and sodalite, which is one of the classic photochromic materials. The book discusses the physics of the interactions of electromagnetic, elastic, and spin waves in single crystal magnetic insulators. The text then describes the mechanism on which inorganic photochromic materials are based, as observed in a variety of materials in single crystal, powder, and gl

  6. A Review on the Research Progress of Nano Organic Friction Materials.

    Science.gov (United States)

    Liu, Yang; Bao, Jiusheng; Hu, Dongyang; Ge, Shirong; Yin, Yan; Liu, Tonggang

    2016-01-01

    Traditional organic friction materials are difficult to adapt to people's growing technical requirements for stability, safety, comfort and environmental protection in the braking process. With the rapid development of nanotechnology, the brake's organic friction materials meet new opportunities. This article aims to review the research progress of organic friction materials that have applied nanotechnology. The research progress of nano organic friction materials was reviewed from four aspects in this article. Firstly, this article outlined the development history of friction materials. Secondly, two preparation methods of the nano organic friction material were summarized as by nano modifying of matrix material and by adding nanoparticles into friction material. Thirdly, it was indicated that the nano organic friction material has generally better mechanical, physical properties and tribological performance than traditional organic friction materials. And the main factors that affect the friction and wear performance were analyzed. Finally, the main existing problems in this field were summarized. It was pointed out that the nano organic friction material may be an important developing trend of friction materials. It was also pointed out that the dispersion of nanoparticles must be a key process during preparation. What is more, the improvement mechanisms of performance by nano modifying were explained. And it was considered at the end that the functional friction material with magnetism or self-adsorption may be a leading developoing direction of nano organic friction materials in the future. The findings of this review confirm the excellent performance of nano organic friction materials. It is concluded that the development of a new functional friction material by using the special effect of nanoparticles will be an important developing trend. Few relevant patents to the topic have been reviewed and cited.

  7. Modification of polyamide-CdS-CdSe composite material films with Ag using a cation–cation exchange reaction

    Energy Technology Data Exchange (ETDEWEB)

    Krylova, V.; Žalenkienė, S.; Dukstienė, N. [Department of Physical and Inorganic Chemistry, Kaunas University of Technology, Radvilenu st. 19, LT-50254, Kaunas (Lithuania); Baltrusaitis, J., E-mail: job314@lehigh.edu [Department of Chemical and Biomolecular Engineering, Lehigh University, B336 Iacocca Hall, 111 Research Drive, Bethlehem, PA 18015 (United States)

    2015-10-01

    Highlights: • We investigated deposition of a mixed CdSe-CdS-Ag{sub 2}Se-Ag{sub 2}S on polyamide. • A single chalcogen precursor – K{sub 2}SeS{sub 2}O{sub 6} – was used. • AAS showed five- to ten-fold excess of chalcogens diffused into PA. • Addition of AgNO{sub 3} resulted in subsurface Ag{sub 2}Se–Ag{sub 2}S formation. - Abstract: Thin mixed CdSe-CdS-Ag{sub 2}Se-Ag{sub 2}S films were deposited on a polyamide 6 (PA) surface by successfully using a cation-exchange reaction between Cd{sup 2+} and Ag{sup +} to convert CdSe-CdS into Ag{sub 2}Se-Ag{sub 2}S. These were deposited using a K{sub 2}SeS{sub 2}O{sub 6} precursor solution at 60 °C followed by cadmium acetate (Cd(CH{sub 3}COO){sub 2}). An aqueous AgNO{sub 3} solution was used as the Ag source. XRD patterns showed a complex PA-Cd-S-Se-Ag film crystalline composition with CdS, CdSe, Ag{sub 2}S and Ag{sub 2}Se peaks. Calculated dislocation density ranged within 5–15 × 10{sup 13} lines·m{sup −2} indicating high quality atomic layers. Atomic Absorption Spectroscopy (AAS) showed five- to ten-fold excess of chalcogens to metals in the thin films formed. No chalcogenides were observed on the sample surface during XPS analysis after Ag exchange due to the desorption of CdS and CdSe layers, not diffused into the bulk of the polymer suggesting that silver chalcogenides were located subsurface, as opposed to the outermost layer, likely comprised of Ag{sub 2}O.

  8. Chemistry and Materials Science progress report, first half FY 1992. Weapons-Supporting Research and Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This report contains sections on: Fundamentals of the physics and processing of metals; interfaces, adhesion, and bonding; energetic materials; plutonium research; synchrotron radiation-based materials science; atomistic approach to the interaction of surfaces with the environment: actinide studies; properties of carbon fibers; buried layer formation using ion implantation; active coherent control of chemical reaction dynamics; inorganic and organic aerogels; synthesis and characterization of melamine-formaldehyde aerogels; structural transformation and precursor phenomena in advanced materials; magnetic ultrathin films, surfaces, and overlayers; ductile-phase toughening of refractory-metal intermetallics; particle-solid interactions; electronic structure evolution of metal clusters; and nanoscale lithography induced chemically or physically by modified scanned probe microscopy.

  9. The NASA Materials Science Research Program: It's New Strategic Goals and Opportunities

    Science.gov (United States)

    Schlagheck, Ronald A.; Stagg, Elizabeth

    2004-01-01

    In the past year, the NASA s Office of Biological and Physical Research (OBPR) has formulated a long term plan to perform strategical and fundamental research bringing together physics, chemistry, biology, and engineering to solve problems needed for current and future agency mission goals. Materials Science is one of basic disciplines within the Enterprise s Division of Physical Sciences Research. The Materials Science Program participates to utilize effective use of International Space Station (ISS) and various world class ground laboratory facilities to solve new scientific and technology questions and transfer these results for public and agency benefits. The program has recently targeted new investigative research in strategic areas necessary to expand NASA knowledge base for exploration of the universe and some of these experiments will need access to the microgravity of space. The program is implementing a wide variety of traditional ground and flight based research related types of fundamental science related to materials crystallization, fundamental processing, and properties characterization in order to obtain basic understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. , In addition new initiatives in radiation protection, materials for propulsion and In-space fabrication and repair focus on research helping the agency solve problems needed for future transportation into the solar system. A summary of the types and sources for this research is presented including those experiments planned for a low gravity environment. Areas to help expand the science basis for NASA future missions are described. An overview of the program is given including the scope of the current and future NASA Research Announcements with emphasis on new materials science initiatives. A description of the planned flight experiments to be conducted on the International Space Station program along with the planned

  10. REFERENCE MATERIALS SYSTEM OF SCIENTIFIC METHODICAL CENTRE OF STATE SERVICE OF REFERENCE MATERIALS FOR COMPOSITION AND PROPERTIES OF SUBSTANCES AND MATERIALS URAL RESEARCH INSTITUTE FOR METROLOGY

    Directory of Open Access Journals (Sweden)

    E. V. Osinseva

    2015-01-01

    Full Text Available Since 1960s UNIIM performs research in the field of needs in reference materials of composition and properties of substances and materials (RM as well as develops it. During the research UNIIM has developed 757 types of RMs for metrological measurement assurance of factors of composition and properties of substance and materials for test laboratories of chemical, pharmaceutical, fuel, food industry, agriculture, metallurgy and ecological monitoring laboratories. List ofRMs enlarges thanks to development of UNIIM standards and transmission measurement facility from State standards of units. Taking into account the actual requirements in the field of measurements, the UNIIM's key destination is to assure the accuracy and the metrological traceability of measurements. The present-day system of RMs to be developed in UNIIM includes RMs of composition of inorganic and organic compounds and their solutions, fuels, stable isotopic materials, water, grounds, food products, biomaterials, nanomaterials, metals, alloys and other materials offerrous and non-ferrous industry, RMs of properties (thermodynamic, magnetic, physical-chemical, technical of substances and materials. The present article considers history of RMs list development which were created by UNIIM and the strategy of this direction.

  11. Research and development of novel advanced materials for next-generation collimators

    CERN Document Server

    Bertarelli, A; Carra, F; Dallocchio, A; Gil Costa, M; Mariani, N

    2011-01-01

    The study of innovative collimators is essential to handle the high energy particle beams required to explore unknown territory in basic research. This calls for the development of novel advanced materials, as no existing metal-based or carbon-based material possesses the combination of physical, thermal, electrical and mechanical properties, imposed by collimator extreme working conditions. A new family of materials, with promising features, has been identified: metal-diamond composites. These materials are to combine the outstanding thermal and physical properties of diamond with the electrical and mechanical properties of metals. The best candidates are Copper-Diamond (Cu-CD) and Molybdenum-Diamond (Mo-CD). In particular, Mo-CD may provide interesting properties as to mechanical strength, melting temperature, thermal shock resistance and, thanks to its balanced material density, energy absorption. The research program carried out on these materials at CERN and collaborating partners is presented, mainly fo...

  12. In memoriam: Alexander Ivanovskii, innovative researcher and science manager in computational materials science of advanced inorganic materials

    OpenAIRE

    BANNIKOV V.V.; DENISOVA T.A.; ENYASHIN A.N.; MEDVEDEVA N.I.; SHEIN I.R.; SUETIN D.V.; ZHUKOV V.P.; KUZNETSOV M.V.

    2014-01-01

    The paper is written to pay a tribute to Prof. Alexander Leonidovich Ivanovskii, Head of the Quantum Chemistry and Spectroscopy Laboratory at the Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences (RAS), and is devoted to recalling the most signi cant landmarks in his scienti c career. A broad-minded man of great erudition, A. L. Ivanovskii made invaluable contributions in the eld of computational materials science | a new eld of research covering computational...

  13. Material Development to Raise Awareness of Using Smart Boards: An Example Design and Development Research

    Science.gov (United States)

    Günaydin, Serpil; Karamete, Aysen

    2016-01-01

    This study aims to develop training material that will help raise awareness in prospective teachers regarding the benefits of using smart boards in the classroom. In this study, a Type 2 design and development research method (DDR) was used. The material was developed by applying phases of ADDIE--an instructional systems design model. The…

  14. Microwave Emission Characteristics of Natural Materials and the Environment (A Summary of Six Years Research).

    Science.gov (United States)

    emission characteristics of natural materials and the environment . Research activities encompass investigations of the ocean and coastal environment...snowpack and ice studies, sediment and soil studies, dielectric constant measurements and techniques, and analytical modeling of natural materials and the ... environment . Field studies were conducted with a mobile microwave field laboratory containing a number of microwave radiometers and supporting

  15. Research activities on structure materials of spallation neutron source at SINQ

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, G.S.; Dai, Y. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    With the growing interests on powerful spallation neutron sources, especially with liquid metal targets, and accelerator driven energy systems, spallation materials science and technology have been received wide attention. At SINQ, material research activities are focused on: a) liquid metal corrosion; b) radiation damage; and c) interaction of corrosion and radiation damage. (author) 1 fig., refs.

  16. A Corpus-Based Approach to Online Materials Development for Writing Research Articles

    Science.gov (United States)

    Chang, Ching-Fen; Kuo, Chih-Hua

    2011-01-01

    There has been increasing interest in the possible applications of corpora to both linguistic research and pedagogy. This study takes a corpus-based, genre-analytic approach to discipline-specific materials development. Combining corpus analysis with genre analysis makes it possible to develop teaching materials that are not only authentic but…

  17. The hot cell laboratories for material investigations of the Institute for Safety Research

    Energy Technology Data Exchange (ETDEWEB)

    Viehrig, H.W.

    1998-10-01

    Special facilities for handling and testing of irradiated specimens are necessary, to perform the investigation of activated material. The Institute for Safety Research has two hot cell laboratories: - the preparation laboratory and - the materials testing laboratory. This report is intended to give an overview of the available facilities and developed techniques in the laboratories. (orig.)

  18. Application and Research Status of Alternative Materials for 3D-printing Technology

    Directory of Open Access Journals (Sweden)

    WANG Yanqing

    2016-08-01

    Full Text Available Application features and research status of alternative 3D-printing materials for six typical 3D-printingtechniques were reviewed. From the point of view of physical forms, four kinds of materials of liquid photosensitive resin material, thin sheet material (paper or plastic film , low melting point filament material and powder material are included. And from the composition point of view, nearly all kinds of materials in the production and life are included such as polymer materials: plastic, resin, wax; metal and alloy materials; ceramic materials. Liquid photosensitive resin material is used for stereo lithigraphy apparatus(SLA; thin sheet materials such as paper or plastic film are used for laminated object manufacturing(LOM; low melting point polymer filament materials such as wax filament, polyolefin resin filament, polyamide filament and ABS filament are used for fused deposition modeling(FDM; very wide variety powder materials including nylon powder, nylon-coated glass powder, polycarbonate powder, polyamide powder, wax powder, metal powder(Re-sintering and infiltration of copper are needed after sintering, wax-coated ceramic powder, wax-coated metal powder and thermosetting resin-coated fine sand are used for selective laser sintering(SLS. Nearly the same above powder materials are used for selective laser melting(SLM, but the printed parts own much more higher density and better mechanical properties. Powder materials are likewise used for threedimensional printing and gluing(3DP, however, the powders are stuck together by tricolor binder sprayed through nozzle and cross-section shape of the part is color-printed on it. Finally, the development direction in both quality and the yield of 3D-printing materials were pointed out to be a bottle-neck issue and a hot topic in the field of 3D-printing.

  19. X-Ray Micro-Tomography Applied to Nasa's Materials Research: Heat Shields, Parachutes and Asteroids

    Science.gov (United States)

    Panerai, Francesco; Borner, Arnaud; Ferguson, Joseph C.; Mansour, Nagi N.; Stern, Eric C.; Barnard, Harold S.; Macdowell, Alastair A.; Parkinson, Dilworth Y.

    2017-01-01

    X-ray micro-tomography is used to support the research on materials carried out at NASA Ames Research Center. The technique is applied to a variety of applications, including the ability to characterize heat shield materials for planetary entry, to study the Earth- impacting asteroids, and to improve broadcloths of spacecraft parachutes. From micro-tomography images, relevant morphological and transport properties are determined and validated against experimental data.

  20. Overview of realized research on physical processing methods of primary and secondary materials

    Directory of Open Access Journals (Sweden)

    Mockovèiaková Annamária

    1997-09-01

    Full Text Available The paper describes research activities of the physical mineral processing group at the Institute of Geotechnics of the Slovak Academy of Sciences in last 5 years. The research programme of this group has been focused on the utilization of ferrofluids in mineral processing, especially in fine-grained materials separation. Other investigation works deal with the possibilities of Slovak brown coal preparation and metallurgical wastes processing as well as with the problems of domestic raw-materials treatment.

  1. Evaluation and comparison of SuperLig{reg_sign} 644, resorcinol-formaldehyde and CS-100 ion exchange materials for the removal of cesium from simulated alkaline supernate

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.N.; Bray, L.A.; Eloviche, R.J. [Pacific Northwest Lab., Richland, WA (United States); Bruening, R.L.; Decker, R.M. [IBC Advanced Technologies, Inc., Provo, UT (United States); Kafka, T.M.; White, L.R. [3M Co., St. Paul, MN (United States)

    1995-03-01

    PNL evaluated three polymeric materials for Cs removal efficiency from a simulated Hanford Neutralized Current Acid Waste (NCAW) supernatant liquid using 200 mL ion exchange columns. Cs loadings (mmole Cs/g resin) were 0.20, 0.18, and 0.039 for Super Lig 644, R-F, and CS-100 (0.045, 0.070, 0.011 mmole Cs/mL resin). Elution of each resin material with 0.5 M HNO{sub 3} required 3.5, 7.0, and 3.2 cv to reach 0.1 C/C{sub 0} for the respective materials, resulting in volume compressions of 27, 20, and 6.9. Peak Cs concentrations during elution was 185, 38.5, and 27.8 C/C{sub 0}. SuperLig 644 had the highest Cs loading per gram in NCAW and the greatest volume compression on aci elution. Because of high density and poor elution, R-F had the highest Cs loading per unit volume and lower volume compression. CS-100, the baseline material for Cs removal at Hanford, was inferior to both SuperLig 644 and R-F in terms of Cs loading and selectivity over sodium.

  2. Pediatric Oncology Branch - Psychosocial Support and Research Program-Educational Materials | Center for Cancer Research

    Science.gov (United States)

    Educational Resources The Pediatric Oncology Branch has produced a number of educational and therapeutic materials to help the children we serve learn about their condition and cope with the challenges they might face as a result of their illness. If you are interested in any of these resources, contact Lori Wiener, Ph.D., at wienerl@mail.nih.gov.

  3. Recent progress in research on tungsten materials for nuclear fusion applications in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Rieth, M., E-mail: Michael.rieth@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, Karlsruhe (Germany); Dudarev, S.L. [EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Gonzalez de Vicente, S.M. [EFDA-Close Support Unit, Garching (Germany); Aktaa, J. [Karlsruhe Institute of Technology, Institute for Applied Materials, Karlsruhe (Germany); Ahlgren, T. [University of Helsinki, Department of Physics, Helsinki (Finland); Antusch, S. [Karlsruhe Institute of Technology, Institute for Applied Materials, Karlsruhe (Germany); Armstrong, D.E.J. [Department of Materials, University of Oxford (United Kingdom); Balden, M. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, Garching (Germany); Baluc, N. [Centre de Recherches en Physique des Plasmas, CRPP EPFL - Materials, 5232 Villigen/PSI (Switzerland); Barthe, M.-F. [CNRS, UPR3079 CEMHTI, 1D Avenue, de la Recherche Scientifique, 45071 Orleans cedex 2 (France); Universite d' Orleans, Polytech ou Faculte des Sciences, Avenue du Parc Floral, BP 6749, 45067 Orleans cedex 2 (France); Basuki, W.W. [Karlsruhe Institute of Technology, Institute for Applied Materials, Karlsruhe (Germany); Battabyal, M. [Centre de Recherches en Physique des Plasmas, CRPP EPFL - Materials, 5232 Villigen/PSI (Switzerland); Becquart, C.S. [Unite Materiaux et Transformations, UMR 8207, 59655 Villeneuve d' Ascq (France); Blagoeva, D. [NRG, Nuclear Research and consultancy Group, Petten (Netherlands); Boldyryeva, H. [Institute of Plasma Physics, Za Slovankou 3, 18200 Praha (Czech Republic); and others

    2013-01-15

    The current magnetic confinement nuclear fusion power reactor concepts going beyond ITER are based on assumptions about the availability of materials with extreme mechanical, heat, and neutron load capacity. In Europe, the development of such structural and armour materials together with the necessary production, machining, and fabrication technologies is pursued within the EFDA long-term fusion materials programme. This paper reviews the progress of work within the programme in the area of tungsten and tungsten alloys. Results, conclusions, and future projections are summarized for each of the programme's main subtopics, which are: (1) fabrication, (2) structural W materials, (3) W armour materials, and (4) materials science and modelling. It gives a detailed overview of the latest results on materials research, fabrication processes, joining options, high heat flux testing, plasticity studies, modelling, and validation experiments.

  4. Applying Second Language Acquisition Research Findings to Materials: A cognitive-interactionist perspective

    Directory of Open Access Journals (Sweden)

    Lani Freeborn

    2015-11-01

    Full Text Available In recent years, ELT publishers have been criticised for not incorporating the findings of second language acquisition (SLA research into the design of their teaching materials. The first aim of this article is to inform teachers of key research findings from the cognitive-interactionist approach to SLA by discussing five environmental ingredients that contribute to optimal L2 learning. The second aim of this article is to demonstrate how these research findings can be practically applied to the selection and adaptation of teaching materials. It is the author’s hope that teachers will be encouraged to apply this knowledge to their teaching contexts, and be motivated to keep themselves informed of SLA research findings. Keywords: materials development, SLA research, cognitive-interactionism

  5. Directory of crystal growth and solid state materials production and research

    Energy Technology Data Exchange (ETDEWEB)

    Connolly, T.F.; Battle, G.C.; Keesee, A.M. (comps.)

    1979-03-01

    This directory lists only those who returned questionnaires distributed by the Research Materials Information Center during 1978. The directory includes, in addition to crystal growers, those preparing starting materials for crystal growth and ultrapure noncrystalline research specimens. It also includes responses from those characterizing, or otherwise studying, the properties of materials provided by others. The international coverage of the directory is limited to the United States, Argentina, Australia, Bulgaria, Canada, Czechoslovakia, Egypt, Finland, East Germany, Hungary, India, Israel, Japan, Mexico, Poland, Romania, South Africa, Taiwan, Yugoslavia, and Zaire.

  6. Research Update: Materials design of implantable nanogenerators for biomechanical energy harvesting

    Science.gov (United States)

    Li, Jun; Wang, Xudong

    2017-07-01

    Implantable nanogenerators are rapidly advanced recently as a promising concept for harvesting biomechanical energy in vivo. This review article presents an overview of the most current progress of implantable piezoelectric nanogenerator (PENG) and triboelectric nanogenerator (TENG) with a focus on materials selection, engineering, and assembly. The evolution of the PENG materials is discussed from ZnO nanostructures, to high-performance ferroelectric perovskites, to flexible piezoelectric polymer mesostructures. Discussion of TENGs is focused on the materials and surface features of friction layers, encapsulation materials, and device integrations. Challenges faced by this promising technology and possible future research directions are also discussed.

  7. Research Update: Materials design of implantable nanogenerators for biomechanical energy harvesting

    Directory of Open Access Journals (Sweden)

    Jun Li

    2017-07-01

    Full Text Available Implantable nanogenerators are rapidly advanced recently as a promising concept for harvesting biomechanical energy in vivo. This review article presents an overview of the most current progress of implantable piezoelectric nanogenerator (PENG and triboelectric nanogenerator (TENG with a focus on materials selection, engineering, and assembly. The evolution of the PENG materials is discussed from ZnO nanostructures, to high-performance ferroelectric perovskites, to flexible piezoelectric polymer mesostructures. Discussion of TENGs is focused on the materials and surface features of friction layers, encapsulation materials, and device integrations. Challenges faced by this promising technology and possible future research directions are also discussed.

  8. Insert Concepts for the Material Science Research Rack (MSRR-1) of the Material Science Research Facility (MSRF) on the International Space Station (ISS)

    Science.gov (United States)

    Crouch, Myscha; Carswell, Bill; Farmer, Jeff; Rose, Fred; Tidwell, Paul

    2000-01-01

    The Material Science Research Rack I (MSRR-1) of the Material Science Research Facility (MSRF) contains an Experiment Module (EM) being developed collaboratively by NASA and the European Space Agency (ESA). This NASA/ESA EM will accommodate several different removable and replaceable Module Inserts (MIs) which are installed on orbit NASA's planned inserts include the Quench Module Insert (QMI) and the Diffusion Module Insert (DMI). The QMI is a high-gradient Bridgman-type vacuum furnace with quench capabilities used for experiments on directional solidification of metal alloys. The DMI is a vacuum Bridgman-Stockbarger-type furnace for experiments on Fickian and Soret diffusion in liquids. This paper discusses specific design features and performance capabilities of each insert. The paper also presents current prototype QMI hardware analysis and testing activities and selected results.

  9. Adaptation of instructional materials: a commentary on the research on adaptations of Who Polluted the Potomac

    Science.gov (United States)

    Ercikan, Kadriye; Alper, Naim

    2009-03-01

    This commentary first summarizes and discusses the analysis of the two translation processes described in the Oliveira, Colak, and Akerson article and the inferences these researchers make based on their research. In the second part of the commentary, we describe procedures and criteria used in adapting tests into different languages and how they may apply to adaptation of instructional materials. The authors provide a good theoretical analysis of what took place in two translation instances and make an important contribution by taking the first step in providing a systematic discussion of adaptation of instructional materials. Our discussion proposes procedures for adapting instructional materials for examining equivalence of source and target versions of adapted instructional materials. We highlight that many of the procedures and criteria used in examining comparability of educational tests is missing in this emerging research of area.

  10. Characterization of Lone Pine, California, tremolite asbestos and preparation of research material.

    Science.gov (United States)

    Harper, Martin; Van Gosen, Bradley; Crankshaw, Owen S; Doorn, Stacy S; Ennis, Todd J; Harrison, Sara E

    2015-01-01

    Well-characterized amphibole asbestos mineral samples are required for use as analytical standards and in future research projects. Currently, the National Institute for Standards and Technology Standard Reference Material samples of asbestos are listed as 'Discontinued'. The National Institute for Occupational Safety and Health (NIOSH) has a goal under the Asbestos Roadmap of locating and characterizing research materials for future use. Where an initial characterization analysis determines that a collected material is appropriate for use as a research material in terms of composition and asbestiform habit, sufficient amounts of the material will be collected to make it publicly available. An abandoned mine near Lone Pine, California, contains a vein of tremolite asbestos, which was the probable source of a reference material that has been available for the past 17 years from the Health and Safety Laboratory (HSL) in the UK. Newly collected fibrous vein material from this mine was analyzed at Research Triangle Institute (RTI International) with some additional analysis by the US Geological Survey's Denver Microbeam Laboratory. The analysis at RTI International included: (i) polarized light microscopy (PLM) with a determination of principal optical properties; (ii) X-ray diffraction; (iii) transmission electron microscopy, including energy dispersive X-ray spectroscopy and selected-area electron diffraction; and (iv) spindle stage analysis using PLM to determine whether individual fibers and bundles of the samples were polycrystalline or single-crystal cleavage fragments. The overall findings of the study indicated that the material is tremolite asbestos with characteristics substantially similar to the earlier distributed HSL reference material. A larger quantity of material was prepared by sorting, acid-washing and mixing for sub-division into vials of ~10g each. These vials have been transferred from NIOSH to RTI International, from where they can be obtained on

  11. Barter exchanges

    DEFF Research Database (Denmark)

    Sudzina, Frantisek

    Although barter is often perceived as something that proceeded money, barter is still used. The focus of the paper is on barter exchanges. Barter exchanges are used both in developing countries as well as in developed countries (including the U.S.). They are used by both organizations...... and individuals. They usually allow to exchange good but some include also services. Some exchanges allow only for bi-directional barter, i.e. when only two parties are involved in the exchange. But probably most of the barter exchanges use barter money; this makes it easier to exchange goods and services...

  12. On design-oriented research and digital learning materials in higher education

    NARCIS (Netherlands)

    Hartog, R.J.M.

    2012-01-01

    The context of the research described in this thesis is formed by a number of research projects that were aimed at the design, development, implementation, use and evaluation of innovative digital learning materials. Most of these projects were carried out mainly within Wageningen University. In

  13. 77 FR 58871 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-09-24

    ... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National... From the Federal Register Online via the Government Publishing Office NATIONAL SCIENCE FOUNDATION... Committee Act (Pub. L. 92- 463 as amended), the National Science Foundation announces the following meeting...

  14. Poetry Education Research as an Anchorage of Thought: Using Poetry as Interview Stimulus Material

    Science.gov (United States)

    Xerri, Daniel

    2017-01-01

    Interviews in qualitative research may sometimes employ stimulus material as a means of eliciting richer data. However, scant consideration has been given to the use of poetry for this purpose, especially within the field of poetry education research. This article seeks to address the gap in the literature by illustrating how the use of poetry as…

  15. Postparadigmatic Materialisms: A "New Movement of Thought" for Outdoor Environmental Education Research?

    Science.gov (United States)

    Gough, Noel

    2016-01-01

    Since at least the beginning of this century, the literatures of research methodology in the social sciences have increasingly focused on what are now being called "new empiricisms" and "new materialisms." My purpose in this essay is to appraise the potential of these approaches for outdoor environmental education research. I…

  16. 75 FR 18241 - Proposal Review Panel for Materials Research Notice of Meeting

    Science.gov (United States)

    2010-04-09

    ...: Name: Site Visit review of the Nanoscale Science and Engineering Center (NSEC) at the University of... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National... technical information; financial data, such as salaries and personal information concerning individuals...

  17. 77 FR 20852 - Proposal Review Panel for Materials Research; Notice of Meeting

    Science.gov (United States)

    2012-04-06

    ...: Name: Site visit review of the Nanoscale Science and Engineering Center (NSEC) at the University of... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National... proprietary or confidential nature, including technical information; financial data, such as salaries and...

  18. Ethical issues in the collection, storage, and research use of human biological materials.

    Science.gov (United States)

    Meslin, Eric M; Quaid, Kimberly A

    2004-11-01

    Human biological materials (HBMs) are samples of blood, DNA, organs and tissues commonly obtained during routine surgical procedures or through direct donation by an individual. This article reviews four of the most pressing issues arising from the collection, storage, and use of HBMs in research: current regulations governing research with human subjects, misuse of genetic information, economic factors, and public knowledge.

  19. US/French Joint Research Program regarding the behavior of polymer base materials subjected to beta radiation. Volume 1. Phase-1 normalization results

    Energy Technology Data Exchange (ETDEWEB)

    Wyant, F.J.; Buckalew, W.H.; Chenion, J.; Carlin, F.; Gaussens, G.; Le Tutour, P.; Le Meur, M.

    1986-06-01

    As part of the ongoing multi-year joint NRC/CEA international cooperative test program to investigate the dose-damage equivalence of gamma and beta radiation on polymer base materials, dosimetry and ethylene-propylene rubber (EPR) specimens were exchanged, irradiated, and evaluated for property changes at research facilities in the US (Sandia National Laboratories) and France (Compagnie ORIS Industrie). The purpose of this Phase-1 test series was to normalize and cross-correlate the results obtained by one research center to the other, in terms of exposure (1.0 MeV accelerated electrons and /sup 60/Co gammas) and postirradiation testing (ultimate elongation and tensile strength, hardness, and density) techniques. The dosimetry and material specimen results indicate good agreement between the two countries regarding the exposure conditions and postirradiation evaluation techniques employed.

  20. Experimental process investigation of a latent heat energy storage system with a staggered heat exchanger with different phase change materials for solar thermal energy storage applications

    Science.gov (United States)

    Tsolakoglou, Nikolas P.; Koukou, Maria K.; Vrachopoulos, Michalis Gr.; Tachos, Nikolaos; Lymberis, Kostas; Stathopoulos, Vassilis

    2017-11-01

    This work investigates melting and solidification processes of four different Phase Change Materials (PCM) used as latent heat thermal storage system. The experimental rig was consisted of an insulated tank, filled with the under investigation PCM, a staggered heat exchanger to supply or extract heat from the PCM cavity and a water pump to circulate Heat Transfer Fluid (HTF). Both charging (melting) and discharging (solidification) processes were conducted for two different HTF flow rates. The main scope of this work was to develop a first approach and to investigate the behaviour of PCM under various load conditions (different HTF flow rates). Results show that different HTF flow rates affect melting and solidification time periods; in both processes time was reduced while HTF flow rate was increased but in differentways due to the transition from conduction to convection heat transfer mechanisms.

  1. Community and research staff collaboration for development of materials to inform microbicide study participants in Africa.

    Science.gov (United States)

    Woodsong, Cynthia; Mutsambi, John Michael; Ntshele, Smangalisa; Modikoe, Peggy

    2014-01-01

    Clinical trials of new vaginal products require careful communication with participants about trial requirements. Most microbicide trials have been multi-site studies conducted among women in sub-Saharan Africa, where literacy levels and understanding of scientific methods differ from those designing and conducting the trials. Microbicide trials require women to insert objects in their vagina and ensure they are present in the vagina during sex. For many women, this is a novel behaviour. These behaviours take place within the context of clinical trial participation, which is an additional novelty. Research teams must develop informational materials to help participants understand the clinical trial and input from local research staff and community members can improve the content and format of these materials. This paper discusses the development of illustrated materials developed for microbicide trial participants, presenting examples from two studies. In both studies, research staff and community advisory groups collaborated to review and revise materials. Collaborative efforts revealed insights about how to convey information about clinical trial participation and microbicide use. These insights highlighted realities of the local context, details that might be misunderstood, illustrations of a sensitive nature and concerns about blood testing. In particular, information about blood testing and product use instructions required careful consideration. Although the research team anticipated needing advice on how best to convey information on these topics to participants, some aspects of potential participant concerns about these topics were also new to the research team. Community advisors and local research staff suggested better ways to convey this information, and provided guidance on how to use the materials. The collaboration served to develop informational materials for microbicide trial participants. Furthermore, staff gained a better understanding of issues

  2. Advanced Test Reactor National Scientific User Facility: Addressing advanced nuclear materials research

    Energy Technology Data Exchange (ETDEWEB)

    John Jackson; Todd Allen; Frances Marshall; Jim Cole

    2013-03-01

    The Advanced Test Reactor National Scientific User Facility (ATR NSUF), based at the Idaho National Laboratory in the United States, is supporting Department of Energy and industry research efforts to ensure the properties of materials in light water reactors are well understood. The ATR NSUF is providing this support through three main efforts: establishing unique infrastructure necessary to conduct research on highly radioactive materials, conducting research in conjunction with industry partners on life extension relevant topics, and providing training courses to encourage more U.S. researchers to understand and address LWR materials issues. In 2010 and 2011, several advanced instruments with capability focused on resolving nuclear material performance issues through analysis on the micro (10-6 m) to atomic (10-10 m) scales were installed primarily at the Center for Advanced Energy Studies (CAES) in Idaho Falls, Idaho. These instruments included a local electrode atom probe (LEAP), a field-emission gun scanning transmission electron microscope (FEG-STEM), a focused ion beam (FIB) system, a Raman spectrometer, and an nanoindentor/atomic force microscope. Ongoing capability enhancements intended to support industry efforts include completion of two shielded, irradiation assisted stress corrosion cracking (IASCC) test loops, the first of which will come online in early calendar year 2013, a pressurized and controlled chemistry water loop for the ATR center flux trap, and a dedicated facility intended to house post irradiation examination equipment. In addition to capability enhancements at the main site in Idaho, the ATR NSUF also welcomed two new partner facilities in 2011 and two new partner facilities in 2012; the Oak Ridge National Laboratory, High Flux Isotope Reactor (HFIR) and associated hot cells and the University California Berkeley capabilities in irradiated materials analysis were added in 2011. In 2012, Purdue University’s Interaction of Materials

  3. FIRE-RESISTANCE PROPERTIES RESEARCH OF “WATER GLASS - GRAPHITE MICROPARTICLES” COMPOSITE MATERIAL

    OpenAIRE

    E. A. Pitukhin; A. S. Ustinov

    2016-01-01

    Subject of Research. Research results of the fire-resistance for “water glass - graphite microparticles” composite material (CM) are given. The method for fire-resistance test of the micro composition is suggested in order to determine the limit state of the experimental samples under hightemperature action. Method. Test-benchequipment being used for research includes metering devices of temperature and time, as well as laboratory electric furnace PL20 with a maximum temperature in the chambe...

  4. Center for Fundamental and Applied Research in Nanostructured and Lightweight Materials. Final Technical Summary

    Energy Technology Data Exchange (ETDEWEB)

    Mullins, Michael; Rogers, Tony; King, Julia; Keith, Jason; Cornilsen, Bahne; Allen, Jeffrey; Gilbert, Ryan; Holles, Joseph

    2010-09-28

    The core projects for this DOE-sponsored Center at Michigan Tech have focused on several of the materials problems identified by the NAS. These include: new electrode materials, enhanced PEM materials, lighter and more effective bipolar plates, and improvement of the carbon used as a current carrier. This project involved fundamental and applied research in the development and testing of lightweight and nanostructured materials to be used in fuel cell applications and for chemical synthesis. The advent of new classes of materials engineered at the nanometer level can produce materials that are lightweight and have unique physical and chemical properties. The grant was used to obtain and improve the equipment infrastructure to support this research and also served to fund seven research projects. These included: 1. Development of lightweight, thermally conductive bipolar plates for improved thermal management in fuel cells; 2. Exploration of pseudomorphic nanoscale overlayer bimetallic catalysts for fuel cells; 3. Development of hybrid inorganic/organic polymer nanocomposites with improved ionic and electronic properties; 4. Development of oriented polymeric materials for membrane applications; 5. Preparation of a graphitic carbon foam current collectors; 6. The development of lightweight carbon electrodes using graphitic carbon foams for battery and fuel cell applications; and 7. Movement of water in fuel cell electrodes.

  5. European contribution to heat exchanger design/performance: HTFS research and computer programs. Final report. [SCON4 and CEMP1

    Energy Technology Data Exchange (ETDEWEB)

    Lang, C.; Skrovanek, T.

    1979-01-01

    The performance of selected HTFS computer program in solving example heat exchanger design/performance situations is evaluated. In addition, the specific inputs required by the program are presented to give an idea of the amount of detail the user must supply concerning the heat transfer system. Comments on the versatility of each program and technical details necessary for running each program are also provided. The computer programs examined rate the performance of shell-and-tube type condensers and plate-fin heat exchangers.

  6. [Comparative research on the NIR and MIR micro-imaging of two similar plastic materials].

    Science.gov (United States)

    Wang, Dong; Ma, Zhi-Hong; Zhao, Liu; Pan, Li-Gang; Li, Xiao-Ting; Wang, Ji-Hua

    2011-09-01

    The NIR/MIR micro-imaging can supply not only the information of spectra, but also the information of spacial distribution of the sample, which is superior to the traditional NIR/MIR spectroscopy analysis. In the present paper, polyethylene and parafilm, with similar appearances, were regarded as the research objects, of which the NIR/MIR micro-imaging was collected. Chemical imaging (CI) and compare correlation imaging were carried out for the two materials respectively to discuss the imaging methods of the two materials. The result indicated that the differentiation of the CI values of the two materials in the NIR/MIR CI for material II was 0.004 8 and 0.254 8 respectively, while those in the NIR/MIR CI for material I were 0.002 6 and 0.326 5, respectively. Clear CI was acquired, and the two materials could be differentiated. The result of the compare correlation imagings indicated that the compare correlation imagings, in which the NIR/MIR spectra of the two materials were regarded as reference spectra respectively, can differentiate the two materials remarkably with clear imagings. In the compare correlation imagings of MIR micro-imaging, the difference of the correlation coefficients between the two materials' MIR spectra and the reference spectrum was more than 0.12, which showed a better imaging result; while a tiny difference of the correlation coefficients between the two materials' NIR spectra and the reference spectrum could be employed to show a clear imaging result for NIR compare correlation imaging so as to differentiate the two materials. This thesis, to some extent, can supply the reference to not only the rapid discrimination of the safety of the packaging material for agri-food, but also the imaging methods for NIR/MIR micro-imaging to differentiate the different materials.

  7. Materials and Structures Research for Gas Turbine Applications Within the NASA Subsonic Fixed Wing Project

    Science.gov (United States)

    Hurst, Janet

    2011-01-01

    A brief overview is presented of the current materials and structures research geared toward propulsion applications for NASA s Subsonic Fixed Wing Project one of four projects within the Fundamental Aeronautics Program of the NASA Aeronautics Research Mission Directorate. The Subsonic Fixed Wing (SFW) Project has selected challenging goals which anticipate an increasing emphasis on aviation s impact upon the global issue of environmental responsibility. These goals are greatly reduced noise, reduced emissions and reduced fuel consumption and address 25 to 30 years of technology development. Successful implementation of these demanding goals will require development of new materials and structural approaches within gas turbine propulsion technology. The Materials and Structures discipline, within the SFW project, comprise cross-cutting technologies ranging from basic investigations to component validation in laboratory environments. Material advances are teamed with innovative designs in a multidisciplinary approach with the resulting technology advances directed to promote the goals of reduced noise and emissions along with improved performance.

  8. Topical issues of psychological research materials on matters related to extremism

    Directory of Open Access Journals (Sweden)

    Sekerazh T.N.

    2014-12-01

    Full Text Available The article deals with methodological support psychological and linguistic research "extremist" materials. Presents a comprehensive psycho-linguistic approach to the examination of information materials on matters related to combating extremism and terrorism, and certain provisions of the methodology developed by the Russian federal center of judicial examination of the Ministry of Justice of the Russian Federation. Based on the analysis of the "verbal" crimes related to criminal legal interpretation of extremism and terrorism, highlighted the types of prohibited public expression of communicative action, corresponding to the seven types of "extremist" values. The article outlines the key features of psychological analysis "extremist" materials research stages. It is shown that the complex (psycho-linguistic approach to the study of materials of extremist orientation, is scientifically sound, methodically proven, appropriate to the needs of law enforcement, judicial and investigative practice.

  9. ION EXCHANGE IN GLASS-CERAMICS

    Directory of Open Access Journals (Sweden)

    George Halsey Beall

    2016-08-01

    Full Text Available In the past few years ion-exchange in glasses has found a renewed interest with a lot of new development and research in industrial and academic labs and the commercialization of materials with outstanding mechanical properties. These glasses are now widely used in many electronic devices including hand-held displays and tablets. The exchange is generally conducted in a bath of molten salt below the transition temperature of the glass. The exchange at the surface of an alkali ion by a bigger one brings compressive stress at the surface. The mechanical properties are dependent on the stress level at the surface and the depth of penetration of the bigger ion. As compared to glasses, glass-ceramics have the interest to display a wide range of aspects (transparent to opaque and different mechanical properties (especially higher modulus and toughness. There has been little research on ion-exchange in glass-ceramics. In these materials the mechanisms are much more complex than in glasses because of their polyphasic nature: ion-exchange generally takes place mostly in one phase (crystalline phase or residual glass. The mechanism can be similar to what is observed in glasses with the replacement of an ion by another in the structure. But in some cases this ion-exchange leads to microstructural modifications (for example amorphisation or phase change.This article reviews these ion-exchange mechanisms using several transparent and opaque alumino-silicate glass-ceramics as examples. The effect of the ion exchange in the various glass-ceramics will be described, with particular emphasis on flexural strength.

  10. Ion Exchange in Glass-Ceramics

    Science.gov (United States)

    Beall, George; Comte, Monique; Deneka, Matthew; Marques, Paulo; Pradeau, Philippe; Smith, Charlene

    2016-08-01

    In the past few years ion-exchange in glasses has found a renewed interest with a lot of new development and research in industrial and academic labs and the commercialization of materials with outstanding mechanical properties. These glasses are now widely used in many electronic devices including hand-held displays and tablets. The exchange is generally conducted in a bath of molten salt below the transition temperature of the glass. The exchange at the surface of an alkali ion by a bigger one brings compressive stress at the surface. The mechanical properties are dependent on the stress level at the surface and the depth of penetration of the bigger ion. As compared to glasses, glass-ceramics have the interest to display a wide range of aspects (transparent to opaque) and different mechanical properties (especially higher modulus and toughness). There has been little research on ion-exchange in glass-ceramics. In these materials the mechanisms are much more complex than in glasses because of their polyphasic nature: ion-exchange generally takes place mostly in one phase (crystalline phase or residual glass). The mechanism can be similar to what is observed in glasses with the replacement of an ion by another in the structure. But in some cases this ion-exchange leads to microstructural modifications (for example amorphisation or phase change). This article reviews these ion-exchange mechanisms using several transparent and opaque alumino-silicate glass-ceramics as examples. The effect of the ion exchange in the various glass-ceramics will be described, with particular emphasis on flexural strength.

  11. Next Generation Nuclear Plant Materials Research and Development Program Plan, Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    G.O. Hayner; R.L. Bratton; R.E. Mizia; W.E. Windes; W.R. Corwin; T.D. Burchell; C.E. Duty; Y. Katoh; J.W. Klett; T.E. McGreevy; R.K. Nanstad; W. Ren; P.L. Rittenhouse; L.L. Snead; R.W. Swindeman; D.F. Wlson

    2007-09-01

    DOE has selected the High Temperature Gas-cooled Reactor (HTGR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production. It will have an outlet gas temperature in the range of 950°C and a plant design service life of 60 years. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed reactor and use low-enriched uranium, TRISO-coated fuel. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. Some of the general and administrative aspects of the R&D Plan include: • Expand American Society of Mechanical Engineers (ASME) Codes and American Society for Testing and Materials (ASTM) Standards in support of the NGNP Materials R&D Program. • Define and develop inspection needs and the procedures for those inspections. • Support selected university materials related R&D activities that would be of direct benefit to the NGNP Project. • Support international materials related collaboration activities through the DOE sponsored Generation IV International Forum (GIF) Materials and Components (M&C) Project Management Board (PMB). • Support document review activities through the Materials Review Committee (MRC) or other suitable forum.

  12. Research and implementation of good agricultural practice for traditional Chinese medicinal materials in Jilin Province, China

    OpenAIRE

    Li, Changtian; Yan, Zhengfei; Zhang, Lianxue; Li, Yu

    2014-01-01

    Jilin Province is one of the principal production bases of traditional Chinese medicine (TCM) in China with its typical preponderance in TCM resources, research and development power, and industrialization capacity. The province has 2,790 species of TCM materials in total. Over 20% of the TCM materials in common use are from Jilin Province. The province has established 36 good agricultural practice bases for 22 typical TCMs. The overall situation, in terms of collection, processing, and prepa...

  13. Reports distributed under the NRC Light-Water Reactor Safety Research Foreign Technical Exchange Program. Volume III, January--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, D.S.; Cottrell, W.B.

    1977-09-19

    Lists of documents exchanged during the first half of 1977 under agreements between the U.S. Nuclear Regulatory Commission's Office of Nuclear Regulatory Research and the governments of France, Federal Republic of Germany, and Japan are presented. During this period, the NRC received 41 reports from France, 29 from F. R. Germany, and 24 from Japan, and in return sent 107 U.S. reports to each of these three countries.

  14. Linking didactics and research in instructional material: A new structural model

    DEFF Research Database (Denmark)

    Graf, Stefan Ting

    2009-01-01

    How can research in instructional materials become more relevant for didactics and instruction planning? And how can general didactics reflect questions developed from a media perspective. These are the guiding questions of the article, which assumes a gap between general didactics and research...... and theory of instructional material. General didactics does not sufficiently incorporate a theory of media, and research and theory in instructional material do not recognise general didactics and apply very different conceptions of instruction in their studies – if at all. Through two approaches we argue...... for a new basic structure in didactics in order to bridge the gap when relevant conclusions for pragmatic didactics are in question. The first approach accounts for the place and status of media in the most known structural theories in general didactics. The second approach argues from another angle...

  15. Research overview of design method of super light multi-hole class- honeycomb sandwich structure materials

    Directory of Open Access Journals (Sweden)

    Xiang LI

    Full Text Available With the sandwich structure materials' application and promotion in the field of engineering continuously, existing sandwich structure material gradually cannot meet the design requirements. It is very urgent to develop new sandwich structure materials of high efficiency, energy saving and easy to process. The project puts forward and constructs a new kind of class-honeycomb sandwich structure material combined with important application backgrounds that super light and high strength metal sandwich structure materials are applied into the high weight and high energy consumption equipments of automobile, aerospace and machinery and so on. This research involve: mechanical properties equivalent method for the class-honeycomb sandwich structure and its core; Strength, stiffness and inherent frequency characteristic and failure criterions of the class-honeycomb sandwich structure; based on the failure criterions constructing the multiple-constraint models of the class-honeycomb sandwich structure. The research tries to put forward a new method for innovative design of lightweight material and structure and new ideas of lightweight technology research in theory and practice.

  16. IMPROVING TEACHERS’ PROFESSIONALISM THROUGH MATERIALS DEVELOPMENT, INFORMATION TECHNOLOGY AND CLASSROOM ACTION RESEARCH

    Directory of Open Access Journals (Sweden)

    Emalia Iragiliati Sukarni

    2009-01-01

    Full Text Available Abstract: One of the ways to promote the International standard schools’ teacher professionalism was to carry out weekly workshops on material development based on curriculum pathways of the National Plus High Schools using the Information Technology (IT facilities. This research developed teacher-made materials for the X grade. The materials were graded: narrative, recount, news item, descriptive, ranging from 250 to 500 words. The materials were then tried out in a Classroom Action Research (CAR at eight classes of X grades. Based on previous research, teachers’ preferences are made in line with the students’ choice of issues to be discussed. It aimed at knowing the feasibility of the materials, the students’ preference of exercises and students’ level of competencies of each class related to the understanding of the units. Results of the questionnaires showed that most of the materials were understood and liked by the students. Thus, professionalism was seen during the process of the CAR.

  17. Researches Regarding the Efficiency of Water to Air Heat Exchanger with Heat Pipes for the Mechanical Ventilation System

    OpenAIRE

    Andrei Burlacu; Theodor Mateescu

    2007-01-01

    The present paper proposes the analysis of the efficiency of water to air heat exchanger with heat pipes for the mechanical ventilation system. The performed study is based on the necessity of the unconventional energy forms capitalization, increasing of the energy efficiency and the energy consumption decrease in concordance with the sustainable development concept.

  18. Research on Land Surface Thermal-Hydrologic Exchange in Southern China under Future Climate and Land Cover Scenarios

    Directory of Open Access Journals (Sweden)

    Jianwu Yan

    2013-01-01

    Full Text Available Climate change inevitably leads to changes in hydrothermal circulation. However, thermal-hydrologic exchanging caused by land cover change has also undergone ineligible changes. Therefore, studying the comprehensive effects of climate and land cover changes on land surface water and heat exchanges enables us to well understand the formation mechanism of regional climate and predict climate change with fewer uncertainties. This study investigated the land surface thermal-hydrologic exchange across southern China for the next 40 years using a land surface model (ecosystem-atmosphere simulation scheme (EASS. Our findings are summarized as follows. (i Spatiotemporal variation patterns of sensible heat flux (H and evapotranspiration (ET under the land cover scenarios (A2a or B2a and climate change scenario (A1B are unanimous. (ii Both H and ET take on a single peak pattern, and the peak occurs in June or July. (iii Based on the regional interannual variability analysis, H displays a downward trend (10% and ET presents an increasing trend (15%. (iv The annual average H and ET would, respectively, increase and decrease by about 10% when woodland converts to the cultivated land. Through this study, we recognize that land surface water and heat exchanges are affected greatly by the future climate change as well as land cover change.

  19. Researches Regarding the Efficiency of Water to Air Heat Exchanger with Heat Pipes for the Mechanical Ventilation System

    Directory of Open Access Journals (Sweden)

    Andrei Burlacu

    2007-01-01

    Full Text Available The present paper proposes the analysis of the efficiency of water to air heat exchanger with heat pipes for the mechanical ventilation system. The performed study is based on the necessity of the unconventional energy forms capitalization, increasing of the energy efficiency and the energy consumption decrease in concordance with the sustainable development concept.

  20. Experimental research on the impact of Corbicula fluminea on DIN exchange at a tidal flat sediment-water interface

    Science.gov (United States)

    Liu, Jie; Chen, Zhenlou; Xu, Shiyuan; Zheng, Xiangmin

    2007-10-01

    Based on a simulative experiment and a comparison analysis, the effect of bivalve Corbicula fluminea activity on sediment-water exchange of dissolved inorganic nitrogen (DIN) is studied. The areas included three intertidal flat sites of the Changjiang (Yangtze) River estuary in China. The interface exchange flux of ammonium, nitrate and nitrite in the short experiment (6 h) was -46.4-40, -74.8-929.1 and 2.5-14.6 µmol/(m2·h), respectively. It was found that the burrowing activities of C. fluminea increased NH{4/+} and NO{3/-} release from sediments to overlying water in the short-term experiment. During long-term incubation, NH{4/+} and NO{3/-} released in turn from the sediments. At the beginning of incubation, bioturbation by C. fluminea could accelerate NH{4/+} release from sediments 2-17 times in different sites, resulting in stronger nitrification and increased NO{3/-} concentrations in the overlying water. Sediment profile analysis post-incubation shows that organic matter mineralization and sediment-water NH{4/+} exchange had been stimulated by C. fluminea bioturbation and bioirrigation during the experiment. Therefore, C. fluminea activities such as excretion, burrowing, irrigation and turbation can effectively alter nitrogen dynamics and accelerate and stimulate nitrogen exchange and cycling at the sediment-water interface.

  1. The DOE Center of Excellence for the Synthesis and Processing of Advanced Materials: Research briefs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This publication is designed to inform present and potential customers and partners of the DOE Center of Excellence for the Synthesis and Processing of Advanced Materials about significant advances resulting from Center-coordinated research. The format is an easy-to-read, not highly technical, concise presentation of the accomplishments. Selected accomplishments from each of the Center`s seven initial focused projects are presented. The seven projects are: (1) conventional and superplastic forming; (2) materials joining; (3) nanoscale materials for energy applications; (4) microstructural engineering with polymers; (5) tailored microstructures in hard magnets; (6) processing for surface hardness; and (7) mechanically reliable surface oxides for high-temperature corrosion resistance.

  2. Applied solid state science advances in materials and device research 6

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 6 covers the application of composites in electronic systems. The book discusses different types of composite-composite materials consisting of finely dispersed mixtures of metals and insulators; composite devices in which two distinct semiconductor devices are combined in one package; and composite glass fibers with the core and cladding differing in their optical properties. The text describes articles dealing with properties that can be achieved in versatile materials; light-emitting diodes and photodetectors th

  3. Research and implementation of good agricultural practice for traditional Chinese medicinal materials in Jilin Province, China.

    Science.gov (United States)

    Li, Changtian; Yan, Zhengfei; Zhang, Lianxue; Li, Yu

    2014-10-15

    Jilin Province is one of the principal production bases of traditional Chinese medicine (TCM) in China with its typical preponderance in TCM resources, research and development power, and industrialization capacity. The province has 2,790 species of TCM materials in total. Over 20% of the TCM materials in common use are from Jilin Province. The province has established 36 good agricultural practice bases for 22 typical TCMs. The overall situation, in terms of collection, processing, and preparation, and the implementation of good agricultural practice of TCM materials in Jilin Province are summarized.

  4. Research and implementation of good agricultural practice for traditional Chinese medicinal materials in Jilin Province, China

    Directory of Open Access Journals (Sweden)

    Changtian Li

    2014-10-01

    Full Text Available Jilin Province is one of the principal production bases of traditional Chinese medicine (TCM in China with its typical preponderance in TCM resources, research and development power, and industrialization capacity. The province has 2,790 species of TCM materials in total. Over 20% of the TCM materials in common use are from Jilin Province. The province has established 36 good agricultural practice bases for 22 typical TCMs. The overall situation, in terms of collection, processing, and preparation, and the implementation of good agricultural practice of TCM materials in Jilin Province are summarized.

  5. Polymeric Materials for Aerospace Power and Propulsion: Overview of Polymer Research at NASA Glenn

    Science.gov (United States)

    Meador, Michael A.

    2007-01-01

    Weight, durability and performance are all major concerns for any NASA mission. Use of lightweight materials, such as fiber reinforced polymer matrix composites can lead to significant reductions in vehicle weight and improvements in vehicle performance. Research in the Polymeric Materials Branch at NASA Glenn is focused on improving the durability, properties, processability and performance of polymeric materials by utilizing both conventional polymer science and engineering as well as nanotechnology and bioinspired approaches. This presentation will provide an overview of these efforts and highlight recent progress.

  6. Some statistics about research on granular materials during the last decade

    Science.gov (United States)

    Oquendo, William-Fernando; Estrada, Nicolas

    2017-06-01

    In this work we present several statistical analyses about research on the subject of granular materials during the last ten years. These statistics are based on the set of articles published in the Granular Materials section of Physical Review E during this period, comprising roughly 1000 documents (including rapid communications). We estimate the degree of contribution of countries, academic institutions, authors, and articles, in terms of the frequency of appearance on the articles' affiliations and the number of citations. On the first hand, these analyses serve as a recognition to researchers and research communities that have notably contributed to the development of knowledge on granular materials. On the second hand, the presented statistics allow for identifying countries and institutions where research in granular materials is the most developed, and also places where it can be developed in the future. Finally, these analyses allow for highlighting which cooperations amongst countries have been the most active during the last decade, which in turn allows for identifying potential links to be created and developed across this research network.

  7. Functional design of heat exchange for pneumatic vehicles

    Science.gov (United States)

    Xu, Z. G.; Yang, D. Y.; Shen, W. D.; Liu, T. T.

    2017-10-01

    With the increasingly serious environmental problems, especially the impact of fog and haze, the development of air powered vehicles has become an important research direction of new energy vehicles. Quadrature test was done with different materials, i.e. stainless steel and aluminum alloy, at different inlet pressures, using different expansion gases, i.e. air, CO2, for heat exchanging properties for pneumatic vehicles. The mathematics as well as simulation methods are used to analyze the different heat exchanging effects in the multistage cylinder. The research results showed that the stainless steel has better effects in heat exchanging than Aluminum Alloy; the intake pressure has little effect on CO2 than the air in heat exchanging effect. CO2 is better in heat exchanging than air.

  8. Material exchange and food web of seagrass beds in the Sylt-Rømø Bight: how significant are community changes at the ecosystem level?

    Science.gov (United States)

    Asmus, H.; Asmus, R.

    2000-07-01

    Material exchange, biodiversity and trophic transfer within the food web were investigated in two different types of intertidal seagrass beds: a sheltered, dense Zostera marina bed and a more exposed, sparse Z. noltii bed, in the Northern Wadden Sea. Both types of Zostera beds show a seasonal development of above-ground biomass, and therefore measurements were carried out during the vegetation period in summer. The exchange of particles and nutrients between seagrass beds and the overlying water was measured directly using an in situ flume. Particle sedimentation [carbon (C), nitrogen (N) and phosphorus (P) constituents] from the water column prevailed in dense seagrass beds. In the sheltered, dense seagrass bed, a net particle uptake was found even on windy days (7-8 Beaufort). Dissolved inorganic N and orthophosphate were mainly taken up by the dense seagrass bed. At times of strong winds, nutrients were released from the benthic community to tidal waters. In a budget calculation of total N and total P, the dense seagrass beds were characterised as a material sink. The seagrass beds with sparse Z. noltii were a source of particles even during calm weather. The uptake of dissolved inorganic N in the sparse seagrass bed was low but significant, while the uptake of inorganic phosphate and silicate by seagrasses and their epiphytes was exceeded by release processes from the sediment into the overlying water. Estimates at the ecosystem level showed that material fluxes of seagrass beds in the Sylt-Rømø Bight are dominated by the dense type of Zostera beds. Therefore, seagrass beds act as a sink for particles and for dissolved inorganic nutrients. During storms, seagrass beds are distinct sources for inorganic nutrients. The total intertidal area of the Sylt-Rømø Bight could be described as a sink for particles and a source for dissolved nutrients. This balance of the material budget was estimated by either including or excluding seagrass beds. Including the

  9. FUSION ENERGY SCIENCES WORKSHOP ON PLASMA MATERIALS INTERACTIONS: Report on Science Challenges and Research Opportunities in Plasma Materials Interactions

    Energy Technology Data Exchange (ETDEWEB)

    Maingi, Rajesh [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Zinkle, Steven J. [University of Tennessee – Knoxville; Foster, Mark S. [U.S. Department of Energy

    2015-05-01

    The realization of controlled thermonuclear fusion as an energy source would transform society, providing a nearly limitless energy source with renewable fuel. Under the auspices of the U.S. Department of Energy, the Fusion Energy Sciences (FES) program management recently launched a series of technical workshops to “seek community engagement and input for future program planning activities” in the targeted areas of (1) Integrated Simulation for Magnetic Fusion Energy Sciences, (2) Control of Transients, (3) Plasma Science Frontiers, and (4) Plasma-Materials Interactions aka Plasma-Materials Interface (PMI). Over the past decade, a number of strategic planning activities1-6 have highlighted PMI and plasma facing components as a major knowledge gap, which should be a priority for fusion research towards ITER and future demonstration fusion energy systems. There is a strong international consensus that new PMI solutions are required in order for fusion to advance beyond ITER. The goal of the 2015 PMI community workshop was to review recent innovations and improvements in understanding the challenging PMI issues, identify high-priority scientific challenges in PMI, and to discuss potential options to address those challenges. The community response to the PMI research assessment was enthusiastic, with over 80 participants involved in the open workshop held at Princeton Plasma Physics Laboratory on May 4-7, 2015. The workshop provided a useful forum for the scientific community to review progress in scientific understanding achieved during the past decade, and to openly discuss high-priority unresolved research questions. One of the key outcomes of the workshop was a focused set of community-initiated Priority Research Directions (PRDs) for PMI. Five PRDs were identified, labeled A-E, which represent community consensus on the most urgent near-term PMI scientific issues. For each PRD, an assessment was made of the scientific challenges, as well as a set of actions

  10. Energetic materials research and development activities at Sandia National Laboratories supported under DP-10 programs

    Energy Technology Data Exchange (ETDEWEB)

    Ratzel, A.C. III

    1998-09-01

    This report provides summary descriptions of Energetic Materials (EM) Research and Development activities performed at Sandia National Laboratories and funded through the Department of Energy DP-10 Program Office in FY97 and FY98. The work falls under three major focus areas: EM Chemistry, EM Characterization, and EM Phenomenological Model Development. The research supports the Sandia component mission and also Sandia's overall role as safety steward for the DOE Nuclear Weapons Complex.

  11. Research of the biodegradability of degradable/biodegradable plastic material in various types of environments

    OpenAIRE

    Dana Adamcová; Maja Radziemska; Joanna Fronczyk; Jan Zloch; Vaverková, Magdalena D.

    2017-01-01

    Research was carried out in order to assess biodegradability of degradable/biodegradable materials made of HDPE and mixed with totally degradable plastic additive (TDPA additive) or made of polyethylene (PE) with the addition of pro-oxidant additive (d2w additive), advertised as 100% degradable or certifi ed as compostable within various types of environments. Research conditions were: (i) controlled composting environment – laboratory-scale, (ii) real composting conditions – domestic compost...

  12. Asian consortium on computational materials science theme meeting on ;first principles analysis & experiment: Role in energy research; 22-24 september 2016, SRM University, Kattankulathur, Chennai, India (ACCMS-TM 2016)

    Science.gov (United States)

    Thapa, Ranjit; Kawazoe, Yoshiyuki

    2017-10-01

    The main objective of this meeting was to provide a platform for theoreticians and experimentalists working in the area of materials to come together and carry out cutting edge research in the field of energy by showcasing their ideas and innovations. The theme meeting was successful in attracting young researchers from both fields, sharing common research interests. Participation of more than 250 researchers in ACCMS-TM 2016 has successfully paved the way towards exchange of mutual research insights and establishment of promising research collaborations. To encourage the young participants' research efforts, three best posters, each named as ;KAWAZOE PRIZE; in theoretical category and two best posters named ;ACCMS-TM 2016 POSTER AWARD; for experimental contributions was selected. A new award named ;ACCMS MID-CAREER AWARD; for outstanding scientific contribution in the area of Computational Materials Science was constituted.

  13. PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

    Science.gov (United States)

    Niño, Ely Dannier V.

    2013-11-01

    These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for

  14. Research on simulation based material delivery system for an automobile company with multi logistics center

    Science.gov (United States)

    Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

    2017-06-01

    Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

  15. Research trend in thermally stimulated current method for development of materials and devices in Japan

    Science.gov (United States)

    Iwamoto, Mitsumasa; Taguchi, Dai

    2018-03-01

    Thermally stimulated current (TSC) measurement is widely used in a variety of research fields, i.e., physics, electronics, electrical engineering, chemistry, ceramics, and biology. TSC is short-circuit current that flows owing to the displacement of charges in samples during heating. TSC measurement is very simple, but TSC curves give very important information on charge behaviors. In the 1970s, TSC measurement contributed greatly to the development of electrical insulation engineering, semiconductor device technology, and so forth. Accordingly, the TSC experimental technique and its analytical method advanced. Over the past decades, many new molecules and advanced functional materials have been discovered and developed. Along with this, TSC measurement has attracted much attention in industries and academic laboratories as a way of characterizing newly discovered materials and devices. In this review, we report the latest research trend in the TSC method for the development of materials and devices in Japan.

  16. Writing Material in Chemical Physics Research: The Laboratory Notebook as Locus of Technical and Textual Integration

    Science.gov (United States)

    Wickman, Chad

    2010-01-01

    This article, drawing on ethnographic study in a chemical physics research facility, explores how notebooks are used and produced in the conduct of laboratory science. Data include written field notes of laboratory activity; visual documentation of "in situ" writing processes; analysis of inscriptions, texts, and material artifacts produced in the…

  17. Research on harmonized molecular materials; Bunshi kyocho zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Harmonized molecular materials (HMM) were researched to create functional materials adaptable to needs such as environmental harmony and high-efficient conversion in post-industrial society and aging society. Superior mechanisms function efficiently in organisms for perception, transmission and processing of information, and transport and conversion of substances. These functions are caused by harmonization between organic molecules, or organic molecule and metal or inorganic substance. HMM is a key substance to realize these functions similar to those of organisms artificially. It is the purpose of this research to develop HMMs, reform production process by innovating separation and conversion technologies, and finally realize molecular chemical plants. This research also develops high-efficient devices to contribute to the information society, and progresses the industry of bio-functional materials such as high-sensitive bio-sensor. The functions, applications and creation technologies of three kinds of HMM such as assembly, mesophase and microporous materials were researched in fiscal 1995. 956 refs., 128 figs., 13 tabs.

  18. Competence-Based, Research-Related Lab Courses for Materials Modeling: The Case of Organic Photovoltaics

    Science.gov (United States)

    Schellhammer, Karl Sebastian; Cuniberti, Gianaurelio

    2017-01-01

    We are hereby presenting a didactic concept for an advanced lab course that focuses on the design of donor materials for organic solar cells. Its research-related and competence-based approach qualifies the students to independently and creatively apply computational methods and to profoundly and critically discuss the results obtained. The high…

  19. Design of Digital Learning Material on Social-Psychological Theories for Nutrition Behavior Research

    Science.gov (United States)

    Busstra, Maria C.; De Graaf, Cees; Hartog, Rob

    2007-01-01

    This article describes the design, implementation and evaluation of digital learning material on the social--psychological Theory of Planned Behavior (TPB) and its use in nutrition behavior research. The design is based on guidelines derived from theories on instructional design. The major component of the design challenge is to implement three…

  20. Design of digital learning material on social-psychological theories for nutrition behavior research

    NARCIS (Netherlands)

    Busstra, M.C.; Graaf, de C.; Hartog, R.J.M.

    2007-01-01

    This article describes the design, implementation and evaluation of digital learning material on the social--psychological Theory of Planned Behavior (TPB) and its use in nutrition behavior research. The design is based on guidelines derived from theories on instructional design. The major component

  1. Research on the Application of Tactile Materials to Design and Printing of Books

    Directory of Open Access Journals (Sweden)

    Wang Yuanyuan

    2016-01-01

    Full Text Available China is a country with the most abundant forms of traditional books, and the evolution of book forms has special material characteristics. The Paper meets the demands of people on multi-sensory stimulation and spiritual experience not only through sense of touch taken as one of human body’s multiple senses, but also through analyzing and researching the tactile materials generated based on the sense of touch and discussing how the tactile materials change the single visual experience of traditional paper media. Unique emotional experience and interactive experience brought by the tactile materials are the future book development direction. Through discussing application to contemporary culture and design thinking and introspection and more profoundly understanding the cultural connotation and the artistic value of the books, a newer way of development is provided for future development of paper books.

  2. Fusion Materials Research at Oak Ridge National Laboratory in Fiscal Year 2015

    Energy Technology Data Exchange (ETDEWEB)

    Wiffen, F. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Katoh, Yutai [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Melton, Stephanie G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-12-01

    The realization of fusion energy is a formidable challenge with significant achievements resulting from close integration of the plasma physics and applied technology disciplines. Presently, the most significant technological challenge for the near-term experiments such as ITER, and next generation fusion power systems, is the inability of current materials and components to withstand the harsh fusion nuclear environment. The overarching goal of the Oak Ridge National Laboratory (ORNL) fusion materials program is to provide the applied materials science support and understanding to underpin the ongoing Department of Energy (DOE) Office of Science fusion energy program while developing materials for fusion power systems. In doing so the program continues to be integrated both with the larger United States (US) and international fusion materials communities, and with the international fusion design and technology communities.This document provides a summary of Fiscal Year (FY) 2015 activities supporting the Office of Science, Office of Fusion Energy Sciences Materials Research for Magnetic Fusion Energy (AT-60-20-10-0) carried out by ORNL. The organization of this report is mainly by material type, with sections on specific technical activities. Four projects selected in the Funding Opportunity Announcement (FOA) solicitation of late 2011 and funded in FY2012-FY2014 are identified by “FOA” in the titles. This report includes the final funded work of these projects, although ORNL plans to continue some of this work within the base program.

  3. Combination of Universal Mechanical Testing Machine with Atomic Force Microscope for Materials Research

    Science.gov (United States)

    Zhong, Jian; He, Dannong

    2015-08-01

    Surface deformation and fracture processes of materials under external force are important for understanding and developing materials. Here, a combined horizontal universal mechanical testing machine (HUMTM)-atomic force microscope (AFM) system is developed by modifying UMTM to combine with AFM and designing a height-adjustable stabilizing apparatus. Then the combined HUMTM-AFM system is evaluated. Finally, as initial demonstrations, it is applied to analyze the relationship among macroscopic mechanical properties, surface nanomorphological changes under external force, and fracture processes of two kinds of representative large scale thin film materials: polymer material with high strain rate (Parafilm) and metal material with low strain rate (aluminum foil). All the results demonstrate the combined HUMTM-AFM system overcomes several disadvantages of current AFM-combined tensile/compression devices including small load force, incapability for large scale specimens, disability for materials with high strain rate, and etc. Therefore, the combined HUMTM-AFM system is a promising tool for materials research in the future.

  4. Graduate Student Program in Materials and Engineering Research and Development for Future Accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Spentzouris, Linda [Illinois Inst. of Technology, Chicago, IL (United States)

    2016-07-07

    The objective of the proposal was to develop graduate student training in materials and engineering research relevant to the development of particle accelerators. Many components used in today's accelerators or storage rings are at the limit of performance. The path forward in many cases requires the development of new materials or fabrication techniques, or a novel engineering approach. Often, accelerator-based laboratories find it difficult to get top-level engineers or materials experts with the motivation to work on these problems. The three years of funding provided by this grant was used to support development of accelerator components through a multidisciplinary approach that cut across the disciplinary boundaries of accelerator physics, materials science, and surface chemistry. The following results were achieved: (1) significant scientific results on fabrication of novel photocathodes, (2) application of surface science and superconducting materials expertise to accelerator problems through faculty involvement, (3) development of instrumentation for fabrication and characterization of materials for accelerator components, (4) student involvement with problems at the interface of material science and accelerator physics.

  5. Brittle materials at high-loading rates: an open area of research

    Science.gov (United States)

    Forquin, Pascal

    2017-01-01

    Brittle materials are extensively used in many civil and military applications involving high-strain-rate loadings such as: blasting or percussive drilling of rocks, ballistic impact against ceramic armour or transparent windshields, plastic explosives used to damage or destroy concrete structures, soft or hard impacts against concrete structures and so on. With all of these applications, brittle materials are subjected to intense loadings characterized by medium to extremely high strain rates (few tens to several tens of thousands per second) leading to extreme and/or specific damage modes such as multiple fragmentation, dynamic cracking, pore collapse, shearing, mode II fracturing and/or microplasticity mechanisms in the material. Additionally, brittle materials exhibit complex features such as a strong strain-rate sensitivity and confining pressure sensitivity that justify expending greater research efforts to understand these complex features. Currently, the most popular dynamic testing techniques used for this are based on the use of split Hopkinson pressure bar methodologies and/or plate-impact testing methods. However, these methods do have some critical limitations and drawbacks when used to investigate the behaviour of brittle materials at high loading rates. The present theme issue of Philosophical Transactions A provides an overview of the latest experimental methods and numerical tools that are currently being developed to investigate the behaviour of brittle materials at high loading rates. This article is part of the themed issue 'Experimental testing and modelling of brittle materials at high strain rates'.

  6. General Motors and the University of Michigan smart materials and structures collaborative research laboratory

    Science.gov (United States)

    Brei, Diann; Luntz, Jonathan; Shaw, John; Johnson, Nancy L.; Browne, Alan L.; Alexander, Paul W.; Mankame, Nilesh D.

    2007-04-01

    The field of Smart Materials and Structures is evolving from high-end, one-of-a-kind products for medical, military and aerospace applications to the point of viability for mainstream affordable high volume products for automotive applications. For the automotive industry, there are significant potential benefits to be realized including reduction in vehicle mass, added functionality and design flexibility and decrease in component size and cost. To further accelerate the path from basic research and development to launched competitive products, General Motors (GM) has teamed with the College of Engineering at the University of Michigan (UM) to establish a $2.9 Million Collaborative Research Laboratory (CRL) in Smart Materials and Structures. Researchers at both GM and UM are working closely together to create leap-frog technologies which start at conceptualization and proceed all the way through demonstration and handoff to product teams, thereby bridging the traditional technology gap between industry and academia. In addition to Smart Device Technology Innovation, other thrust areas in the CRL include Smart Material Maturity with a basic research focus on overcoming material issues that form roadblocks to commercialism and Mechamatronic System Design Methodology with an applied focus on development tools (synthesis and analysis) to aid the engineer in application of smart materials to system engineering. This CRL is a global effort with partners across the nation and world from GM's Global Research Network such as HRL Laboratories in California and GM's India Science Lab in Bangalore, India. This paper provides an overview of this new CRL and gives examples of several of the projects underway.

  7. Annual report 2012. Institute of Ion Beam Physics and Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Cordeiro, A.L.; Fassbender, J.; Heera, V.; Helm, M. (eds.)

    2013-09-01

    In 2012 the HZDR, and in consequence also the Institute of Ion Beam Physics and Materials Research (IIM) including its Ion Beam Center (IBC), has undergone a scientific evaluation. The evaluation committee composed of the Scientific Advisory Board and numerous external experts in our field of research concluded that ''the overall quality of the scientific work is excellent'', that ''there are an impressive number of young scientists working enthusiastically on a variety of high-level projects'' and that ''the choice of these projects represents a clear underlying strategy and vision''. We feel honored and are proud that the external view on our scientific achievements is that extraordinary. In view of this outstanding result we would like to express our gratitude to all our staff members for their commitment and efforts. In the past year, we continued our integration into the Helmholtz Association of German Research Centers (HGF) with our Institute mostly active in the research area ''Matter'', but also involved in a number of activities in the research area ''Energy''. In this respect, many consultations were held with the Helmholtz centers contributing to common research areas to precisely define the role we will play in the newly established HGF program ''From Matter to Materials and Life''. Our IBC has been recognized as a large-scale user facility for ion beam analysis and modification of materials, i.e., specializing on materials science. In particular, the IBC plays a prominent role in the recently approved Helmholtz Energy Materials Characterization Platform (HEMCP), which mainly concentrates on the development of dedicated analytical tools for the characterization of materials required for future energy technologies. The successes achieved by the IBC allows us to invest 7200 kEuro to further improve and strengthen the ion beam

  8. The Prospect of Neutron Scattering In the 21st Century: A Powerful Tool for Materials Research

    Directory of Open Access Journals (Sweden)

    E. Kartini

    2007-07-01

    Full Text Available Over the last 60 years research reactors (RRs have played an important role in technological and socio-economical development of mankind, such as radioisotope production for medicine, industry, research and education. Neutron scattering has been widely used for research and development in materials science. The prospect of neutron scattering as a powerful tool for materials research is increasing in the 21st century. This can be seen from the investment of several new neutron sources all over the world such as the Spallation Neutron Source (SNS in USA, the Japan Proton Accelerator Complex (JPARC in Japan, the new OPAL Reactor in Australia, and some upgrading to the existing sources at ISIS, Rutherford Appleton Laboratory, UK; Institute of Laue Langevin (ILL in Grenoble, France and Berlin Reactor, Germany. Developing countries with moderate flux research reactor have also been involved in this technique, such as India, Malaysia and Indonesia. The Siwabessy Multipurpose Reactor in Serpong, Indonesia that also produces thermal neutron has contributed to the research and development in the Asia Pacific Region. However, the international joint research among those countries plays an important role on optimizing the results.

  9. Survey report of FY 1997 on the global environmental industry technology development promotion project. International research exchange project; 1997 nendo chosa hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (kokusai kenkyu koryu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Exchange of personnel among foreign research organizations is significant for promoting research and development to create new research fields and to build new technological systems for the purpose of solving global environmental problems. For this purpose, researchers were sent/invited to/from international conferences and international symposiums related to global environmental technology and exchange of personnel with major foreign research organizations and universities was conducted under the cooperation of RITE and RITE-related researchers and related academic societies. Based on short-term invitation and sending of researchers as well as the feasibility study of researcher exchange, researchers were sent/invited on long- and mid-terms. As a result, exchange of personnel engaged in the latest research in Japan and overseas could be promoted. It was found that various researches are being conducted abroad in basic areas of global environmental technology. Since they are closely related to the research and development of industrial technology contributing to global environmental preservation promoted by RITE, it is important to establish a more efficient exchange system of researchers in the future. 91 refs., 38 figs., 14 tabs.

  10. Merton and Ziman's modes of science: the case of biological and similar material transfer agreements

    NARCIS (Netherlands)

    Rodriguez, V.F.

    2007-01-01

    This paper makes a connection between recent studies on research materials exchange and its effect on the progress of science. Academia fears that scientific development could be hampered by the privatised practices of research material exchange. Since post-academic science represents a sufficient

  11. Evaluation of the Benefits Attributable to Automotive Lighweight Materials Program Research and Development Projects

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.

    2002-01-11

    The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The program focuses on the development and validation of advanced lightweight materials technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The work supports the goals of the Partnership for a New Generation of Vehicles (PNGV). Up to thirty percent of the improvement required to meet the PNGV goal of tripling vehicle fuel economy and much of its cost, safety, and recyclability goal depend on the lightweight materials. Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers.

  12. Development and validation of a fully automated LC method for the determination of cloxacillin in human plasma using anion exchange restricted access material for sample clean-up.

    Science.gov (United States)

    Rbeida, O; Chiap, P; Lubda, D; Boos, K-S; Crommen, J; Hubert, Ph

    2005-01-04

    In the framework of a preliminary investigation on the plasma profile of cloxacillin after oral administration, a simple and rapid LC method was developed for the direct determination of this compound in human plasma. The on-line sample clean-up was carried out using a weak anion exchanger (diethylaminoethyl groups) as restricted access material (RAM). The effects of the washing liquid pH, the ionic strength and the addition of organic modifier to the washing liquid were studied in order to obtain an efficient sample clean-up and a high recovery of cloxacillin. The separation was achieved on octadecylsilica stationary phase using a mobile phase consisting in a mixture of phosphate buffer (pH 4.0; 25 mM) and acetonitrile (72:28, v/v). The UV detection was performed at 215 nm. The most appropriate regression model of the response function as well as the limit of quantitation (LOQ) were first selected during the pre-validation step. These criteria were then assessed during the formal validation step. The LOQ was 50 ng/ml. The method was also validated with respect to analyte recovery, precision, trueness, accuracy and linearity. Finally, it was successfully applied for the analysis of the first plasma samples obtained from patients having taken an oral dose of 500 mg cloxacillin.

  13. Development of a Low Temperature Irradiation Capsule for Research Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Choo, Kee Nam; Cho, Man Soon; Lee, Cheol Yong; Yang, Sung Woo; Shin, Yoon Taek; Park, Seng Jae; Kang, Suk Hoon; Kang, Young Hwan; Park, Sang Jun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-07-01

    A new capsule design was prepared and tested at HANARO for a neutron irradiation of core materials of research reactors as a part of the research reactor development project. Irradiation testing of the materials including graphite, beryllium, and zircaloy-4 that are supposed to be used as core materials in research reactors was required for irradiation at up to 8 reactor operation cycles at low temperature (<100 .deg. C). Therefore, three instrumented capsules were designed and fabricated for an evaluation of the neutron irradiation properties of the core materials (Graphite, Be, Zircaloy-4) of research reactors. The capsules were first designed and fabricated to irradiate materials at low temperature (<100 .deg. C) for a long cycle of 8 irradiation cycles at HANARO. Therefore, the safety of the new designed capsule should be fully checked before irradiation testing. Out-pile performance and endurance testing before HANARO irradiation testing was performed using a capsule under a 110% condition of a reactor coolant flow amount. The structural integrity of the capsule was analyzed in terms of a vibration-induced fatigue cracking of a rod tip of the capsule that is suspected to be the most vulnerable part of a capsule. Another two capsules were irradiated at HANARO for 4 cycles, and one capsule was transferred to a hot cell to examine the integrity of the rod tip of the capsule. After confirming the soundness of the 4 cycle-irradiated capsule, the remaining capsule was irradiated at up to 8 cycles at HANARO. Based on the structural integrity analysis of the capsule, an improved capsule design will be suggested for a longer irradiation test at HANARO.

  14. Integrated foreign exchange risk management

    DEFF Research Database (Denmark)

    Aabo, Tom; Høg, Esben; Kuhn, Jochen

    2010-01-01

    Empirical research has focused on export as a proxy for exchange rate exposure and the use of foreign exchange derivatives as an instrument to deal with this exposure. This empirical study applies an integrated foreign exchange risk management approach with a particular focus on the role of impor...

  15. Integrated Foreign Exchange Risk Management

    DEFF Research Database (Denmark)

    Aabo, Tom; Høg, Esben; Kuhn, Jochen

    Empirical research has focused on export as a proxy for the exchange rate exposure and the use of foreign exchange derivatives as the instrument to deal with this exposure. This empirical study applies an integrated foreign exchange risk management approach with a particular focus on the role...

  16. Design Features and Capabilities of the First Materials Science Research Rack

    Science.gov (United States)

    Pettigrew, P. J.; Lehoczky, S. L.; Cobb, S. D.; Holloway, T.; Kitchens, L.

    2003-01-01

    The First Materials Science Research Rack (MSRR-1) aboard the International Space Station (ISS) will offer many unique capabilities and design features to facilitate a wide range of materials science investigations. The initial configuration of MSRR-1 will accommodate two independent Experiment Modules (EMS) and provide the capability for simultaneous on-orbit processing. The facility will provide the common subsystems and interfaces required for the operation of experiment hardware and accommodate telescience capabilities. MSRR1 will utilize an International Standard Payload Rack (ISPR) equipped with an Active Rack Isolation System (ARIS) for vibration isolation of the facility.

  17. Applied solid state science advances in materials and device research 3

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 3 covers reviews that are directly related to the two devices which are the epitome of applied solid state science - the transistor and the laser. The book discusses the physics of multilayer-gate IGFET memories; the application of the transient charge technique in drift velocity; and trapping in semiconductors and in materials used in xerography, nuclear particle detectors, and space-charge-limited devices; as well as thin film transistors. The text describes the manipulation of laser beams in solids and discusses

  18. DOE Energy Frontiers Research Center for Heterogeneous Functional Materials; the “HeteroFoaM Center”

    Energy Technology Data Exchange (ETDEWEB)

    Reifsnider, Kenneth Leonard [Univ. of South Carolina, Columbia, SC (United States)

    2016-11-03

    Synopsis of five year accomplishments: Devices that convert and store energy are generally made from heterogeneous constituent materials that act and interact to selectively conduct, transport, and separate mass, heat, and charge. Controlling these actions and interactions enables the technical breakthroughs that have made fuel cells, batteries, and solid state membranes, for example, essential parts of our society. In the biological sense, these materials are ‘vascular’ rather than primitive ‘cellular’ materials, in which the arrangements and configurations of the constituents (including their void phases) play essential and definitive roles in their functional capabilities. In 2009 a group of investigators, with lifetime investments of effort in the understanding of heterogeneous materials, recognized that the design of such material systems is not an optimization problem as such. Local interactions of the constituents create “emergent” properties and responses that are not part of the formal set of constituent characteristics, in much the same sense that society and culture is created by the group interactions of the people involved. The design of emergent properties is an open question in all formal science, but for energy materials the lack of this foundation science relegates development tasks to Edisonian trial and error, with anecdotal success and frequent costly failures. That group defined, for the first time, multi-scale heterogeneous functional materials with functional disordered and void phase regions as “HeteroFoaM,” and formed the first multidisciplinary research team to define and codify the foundation science of that material class. The primary goal of the HeteroFoaM Center was, and is, to create and establish the multi-scale fundamental knowledge and related methodology required for the rational and systematic multiphysics design of heterogeneous functional materials and their interfaces and surfaces for applications in energy

  19. 1995 Federal Research and Development Program in Materials Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    1995-12-01

    The Nation's economic prosperity and military security depend heavily on development and commercialization of advanced materials. Materials are a key facet of many technologies, providing the key ingredient for entire industries and tens of millions of jobs. With foreign competition in many areas of technology growing, improvements in materials and associated processes are needed now more than ever, both to create the new products and jobs of the future and to ensure that U.S. industry and military forces can compete and win in the international arena. The Federal Government has invested in materials research and development (R&D) for nearly a century, helping to lay the foundation for many of the best commercial products and military components used today. But while the United States has led the world in the science and development of advanced materials, it often has lagged in commercializing them. This long-standing hurdle must be overcome now if the nation is to maintain its leadership in materials R&D and the many technologies that depend on it. The Administration therefore seeks to foster commercialization of state-of-the-art materials for both commercial and military use, as a means of promoting US industrial competitiveness as well as the procurement of advanced military and space systems and other products at affordable costs. The Federal R&D effort in Fiscal Year 1994 for materials science and technology is an estimated $2123.7 million. It includes the ongoing R&D base that support the missions of nine Federal departments and agencies, increased strategic investment to overcome obstacles to commercialization of advanced materials technologies, interagency cooperation in R&D areas of mutual benefit to leverage assets and eliminate duplicative work, cost-shared research with industrial and academic partners in critical precompetitive technology areas, and international cooperation on selected R&D topics with assured benefits for the United States. The

  20. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.