WorldWideScience

Sample records for excess molar volumes

  1. Excess Molar Volumes and Partial Molar Volumes of Binary Systems ...

    African Journals Online (AJOL)

    NJD

    Excess molar volumes have been evaluated from density measurements over the entire composition range for binary systems of an ionic liquid ... was used to fit the excess molar volume data and the partial molar volumes were determined from the Redlich-Kister coefficients. ... ture below the boiling point of water. Most of ...

  2. Excess Molar Volumes and Partial Molar Volumes of Binary Systems ...

    African Journals Online (AJOL)

    Excess molar volumes have been evaluated from density measurements over the entire composition range for binary systems of an ionic liquid (IL) and an alcohol at T = (298.15, 303.15 and 313.15) K. The IL is 1-butyl-3-methylimidazolium methylsulphate [BMIM]+[MeSO4]– and the alcohols are methanol, ethanol or ...

  3. Excess molar volumes, and refractive index of binary mixtures of ...

    African Journals Online (AJOL)

    Excess molar volumes (VE) viscosities and refractive index have been evaluated for binary mixtures of glycerol + water, and glycerol + methanol at 298.15 K and 303.15 K. Excess molar volumes (VE) have been calculated from density. The excess molar volume (VE) results were fitted to the Redlich and Kister type ...

  4. Excess molar volumes and isentropic compressibilities of binary ...

    Indian Academy of Sciences (India)

    Remaining five binary mixtures, n-heptane + toluene, cyclohexane + n-heptane, cyclohexane + n-hexane, toluene + nhexane and n-decane + n-hexane show negative excess molar volumes over the whole composition range. However, the large negative values of excess molar volume becomes dominant in toluene + ...

  5. excess molar volumes, and refractive index of binary mixtures of ...

    African Journals Online (AJOL)

    Preferred Customer

    mixtures of glycerol + water, and glycerol + methanol at 298.15 K and 303.15 K. Excess molar volumes (VE) have been calculated ... KEY WORDS: Excess molar, Density, Refractive index, Glycerol, Water, Methanol ... Biodiesel, defined as “a substitute for, or a additive to diesel fuel that is derived from the oils and fats of ...

  6. Excess Molar Volume of Binary Systems Containing Mesitylene

    Directory of Open Access Journals (Sweden)

    Morávková, L.

    2013-05-01

    Full Text Available This paper presents a review of density measurements for binary systems containing 1,3,5-trimethylbenzene (mesitylene with a variety of organic compounds at atmospheric pressure. Literature data of the binary systems were divided into nine basic groups by the type of contained organic compound with mesitylene. The excess molar volumes calculated from the experimental density values have been compared with literature data. Densities were measured by a few experimental methods, namely using a pycnometer, a dilatometer or a commercial apparatus. The overview of the experimental data and shape of the excess molar volume curve versus mole fraction is presented in this paper. The excess molar volumes were correlated by Redlich–Kister equation. The standard deviations for fitting of excess molar volume versus mole fraction are compared. Found literature data cover a huge temperature range from (288.15 to 343.15 K.

  7. Excess molar volumes and isentropic compressibilities of binary ...

    Indian Academy of Sciences (India)

    However, the large negative values of excess molar volume becomes dominant in toluene. · n-hexane mixture. Deviation in isentropic compressibility is negative over the whole range of composition in the case of all the six binary mixtures. Existence of specific intermolecular interac- tions in the mixtures has been analyzed ...

  8. Excess Molar Volume Of Binarymixtures From Iso-Propyl Alcohol ...

    African Journals Online (AJOL)

    In this work, binary mixtures from Tertiary-Butyl alcohol (TBA), Toluene (TOL) and Iso-Propyl alcohol (IPA) were prepared at 298K. The mixtures physical properties which includes densities of mixtures (ρ) and pure components (ρI) and mole fractions of components (x) were equally measured at 298K. Excess molar volumes ...

  9. excess molar volumes, and refractive index of binary mixtures of ...

    African Journals Online (AJOL)

    Preferred Customer

    product of biodiesel and used in many wide industrial applications. Glycerol can be obtained by ... binary mixtures of glycerol + water and glycerol + methanol covering the whole composition range and at 298.15 K .... 114 the mixture. Excess molar volumes on mixing of the binary systems were fitted to Redlich–. Kister [12 ...

  10. Densities and Excess Molar Volume for the Ternary Systems (1 ...

    African Journals Online (AJOL)

    methylimidazolium methyl sulphate ([BMIM]+[MeSO4]-) were determined. The ternary systems studied were ([BMIM]+[MeSO4]-+ nitromethane + methanol or ethanol or 1-propanol) at the temperatures (303.15 and 313.15) K. The ternary excess molar ...

  11. Excess molar volumes and viscosities of binary mixtures of some ...

    Indian Academy of Sciences (India)

    Unknown

    TvT. (10). In the present study the value of the reduced volume for the liquids and their mixtures ν~ was determined from α values of the mixtures using the (6). Table 5 shows the data4,14,36–38 used in the application of the. Flory model. The excess function (∂Vm. E /∂T)p was computed by analytical differentiation of (3) at ...

  12. Excess molar volumes of the binary mixtures of polyethylene glycol 300 with ethoxyethanols at various temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Kinart, Cezary M. [Department of Chemistry, University of Lodz, 90-236 Lodz, Pomorska 163 (Poland)]. E-mail: ckinart@uni.lodz.pl; Kinart, Wojciech J. [Department of Organic Chemistry, University of Lodz, 90-136 Lodz, Narutowicza 68 (Poland); Cwilinska, Aneta [Department of Chemistry, University of Lodz, 90-236 Lodz, Pomorska 163 (Poland); Klimczak, Magdalena [Department of Chemistry, University of Lodz, 90-236 Lodz, Pomorska 163 (Poland)

    2006-08-15

    Densities at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K in the binary liquid mixtures of polyethylene glycol 300 with 2-ethoxyethanol, 2-(2-ethoxyethoxy)ethanol, or 2-{l_brace}2-(2-ethoxyethoxy)ethoxy{r_brace}ethanol have been measured over the entire range of mixture compositions. These data have been used to compute the excess molar volumes. The excess molar volumes are negative over the entire range of composition for all studied mixtures. The results are discussed in terms of intermolecular interactions in the bulk binary mixtures.

  13. Excess molar volumes and apparent molar volumes of some amide + water systems at 303.15 and 308.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Pal, A.; Singh, Y.P. [Univ. of Kurukshetra (India). Dept. of Chemistry

    1995-07-01

    Excess molar volumes V{sub m}{sup E} for the binary mixtures of N-methylformamide, N,N-dimethylformamide, 2-pyrrolidinone, N-methyl-2-pyrrolidinone, and N,N-dimethylacetamide with water have been measured using a continuous-dilution dilatometer at 303.15 and 308.15 K as a function of composition. In all mixtures, the excess molar volumes are negative over the entire composition range. The results were used to estimate the apparent molar volumes of the components. The values of these two properties have been discussed in terms of intermolecular interactions between the mixing components of the binary mixture.

  14. Excess molar volumes of 1,3 propanediol + (C1-C5 alkan-1-ols: Application of cubic EOS

    Directory of Open Access Journals (Sweden)

    Almasi Mohammad

    2012-01-01

    Full Text Available Densities of the binary mixtures consist of methanol, ethanol, 1- propanol, 1-butanol and 1-pentanol with 1,3 Propanediol were measured at temperatures (293.15, 298.15, 303.15 and 313.15 K and atmospheric pressure. Measurements have been made over the full range of compositions and for the pure compounds by using a vibrating tube densimeter. Excess molar volumes have been obtained from these experimental results and were fitted to a Redlich-Kister type expansion. The results were interpreted in terms of molecular interactions and structural factors of the alcohols. It was observed that an increase of the alcohol carbon chain length led to lower interactions on mixing. The Peng-Robinson-Stryjek-Vera (PRSV equation of state has been used to correlate the binary excess molar volumes.

  15. Excess molar volume of acetonitrile + alcohol systems at 298.15 K. Part II: Correlation by cubic equation of state

    Directory of Open Access Journals (Sweden)

    SLOBODAN P. SERBANOVIC

    2003-01-01

    Full Text Available The excess molar volume VE of the binary liquid systems acetonitrile + methanol and acetonitrile + ethanol, experimentally determined in the previous part, were correlated by the PRSV CEOS coupled with the vdW and TCBT mixing rules. The results obtained show that the number and position of the interaction parameters of these models are of great importance for a satisfactory fitting of VE data.

  16. Topological Investigations of Excess Molar Volumes and Excess Isentropic Compressibilities of Ternary Mixtures Containing Pyrrolidin-2-one at 308.15 K

    Science.gov (United States)

    Yadav, Jaibir S.; Sharma, Dimple; Kumar, Satish; Sharma, V. K.

    2010-12-01

    Excess molar volumes, {V^E_{ijk}}, and speeds of sound, u ijk , of pyrrolidin-2-one (2-Py) ( i)+benzene or methyl benzene ( j)+propan-1-ol ( k) ternary mixtures and speeds of sound, u ij , of benzene or methyl benzene ( i)+propan-1-ol ( j) binary mixtures have been measured dilatometrically and interferrometrically over the complete mole fraction range at 308.15 K. Speed-of-sound data have been utilized to evaluate excess isentropic compressibilities for binary and ternary mixtures. {V^E_{ijk}} and {({kappa_S^E})_{ijk}} values have been fitted to a Redlich-Kister equation to predict ternary adjustable parameters and standard deviations. Topological investigations employed for predicting excess molar volumes and excess isentropic compressibilities, {({kappa _S^E} )_{ij}}, of 2-Py + benzene or methyl benzene or propan-1-ol binary mixtures have been extended to ternary mixtures (by employing the concept of a connectivity parameter of third degree, 3 ξ, of a molecule) to obtain an expression that describes well the measured {V^E_{ijk}} and {({kappa_S^E})_{ijk}} values.

  17. DENSITY, REFRACTIVE INDEX, APPARENT VOLUMES AND EXCESS MOLAR VOLUMES OF FOUR PROTIC IONIC LIQUIDS + WATER AT T=298.15 AND 323.15 K

    Directory of Open Access Journals (Sweden)

    R. Rocha Pinto

    2015-09-01

    Full Text Available AbstractDensities and refractive index of binay mixtures of water with four protic ionic liquids, based on ammonium and fatty acids, were measured at 298.15 and 323.15 K, under atmospheric pressure. Apparent and excess molar volumes were obtained by experiments and fitting data to the Redlich-Meyer (RM, Redlich-Kister (RK and Prigogine-Flory-Patterson (PFP equations. The molar volume values were high, suggesting strong ion-solvent interaction. The same interaction also became stronger as the temperature increased. Excess volume values were negative, indicating that packing efficiency ability or attractive interactions occurred in mixtures of ionic liquid + water. The errors (AARD for the properties in excess were in the range of 1.8% to 7.2%. The PFP error for the apparent volume was in the range of 0.34% to 0.06%, lower than the RM error for the same property, which was in the range of 0.70 to 1.55%. The Gladstone-Dale model was applied to correlate the refractive index of the binary mixture with the density from the values of both pure components.

  18. Excess molar volumes and deviations of the relative permittivity of the binary mixtures of 2-propoxyethanol with diethylene, triethylene, and tetraethylene glycols at various temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Cwilinska, Aneta; Klimczak, Magdalena [Department of Chemistry, University of Lodz, 90-236 Lodz, Pomorska 163 (Poland); Kinart, Wojciech J. [Department of Organic Chemistry, University of Lodz, 90-136 Lodz, Narutowicza 68 (Poland); Kinart, Cezary M. [Department of Chemistry, University of Lodz, 90-236 Lodz, Pomorska 163 (Poland)], E-mail: ckinart@uni.lodz.pl

    2008-03-15

    Densities and relative permittivities at T = (293.15, 298.15, and 303.15) K in the binary liquid mixtures of 2-propoxyethanol with diethylene glycol, triethylene glycol, and tetraethylene glycol have been measured over the entire mixture compositions. These data have been used to compute the excess molar volumes and deviations of the relative permittivity. The results are discussed in terms of intermolecular interactions in the bulk of studied the binary mixtures.

  19. Excess molar volumes of (an alkanol plus a branched chain ether) at the temperature 298.15 K and the application of the ERAS model

    CSIR Research Space (South Africa)

    Letcher, TM

    1997-12-01

    Full Text Available The excess molar volumes V-m(E) {x(CH3OH or CH3CH2OH or CH3(CH2)(2)OH or CH3CH(OH)CH3 + (1 - x)(CH3(CH2)(2)}(2)O or CH3C(CH3)(2)OCH3 or CH3CH2C(CH3)(2)OCH3} have been calculated from measured values of density over the whole composition range...

  20. Excess molar volume, viscosity, and refractive index study for the ternary mixture {l_brace}2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3){r_brace} at different temperatures. Application of the ERAS-model and Peng-Robinson-Stryjek-Vera equation of state

    Energy Technology Data Exchange (ETDEWEB)

    Fattahi, M. [Faculty of Chemistry, University of Bu-Ali Sina, Hamedan 65174 (Iran, Islamic Republic of); Iloukhani, H., E-mail: iloukhani@basu.ac.i [Faculty of Chemistry, University of Bu-Ali Sina, Hamedan 65174 (Iran, Islamic Republic of)

    2010-11-15

    Densities, viscosities, and refractive indices of the ternary mixture consist of {l_brace}2-methyl-2-butanol (1) + tetrahydrofuran (THF) (2) + propylamine (3){r_brace} at a temperature of 298.15 K and related binary mixtures were measured at temperatures of (288.15, 298.15, and 308.15) K at ambient pressure. Data were used to calculate the excess molar volumes and the deviations of the viscosity and refractive index. The Redlich-Kister and the Cibulka equations were used for correlating binary and ternary properties, respectively. The ERAS-model has been applied for describing the binary and ternary excess molar volumes and also Peng-Robinson-Stryjek-Vera (PRSV) equation of state (EOS) has been used to predict the binary and ternary excess molar volumes and viscosities.

  1. Excess Molar Volumes and Viscosities for the Binary Mixtures of n-Octane, n-Decane, n-Dodecane, and n-Tetradecane with Octan-2-ol at 298.15 K

    Directory of Open Access Journals (Sweden)

    Arvind R. Mahajan

    2013-01-01

    Full Text Available Experimental values of densities (ρ and viscosities (η in the binary mixtures of n-octane, n-decane, n-dodecane, and n-tetradecane with octan-2-ol are presented over the whole range of mixture composition at T=298.15 K. From these data, excess molar volume (VmE, deviations in viscosity (Δη, and excess Gibbs free energy of activation ΔG∗E have been calculated. These results were fitted to Redlich-Kister polynomial equations to estimate the binary coefficients and standard errors. Jouyban-Acree model is used to correlate the experimental values of density and viscosity at T=298.15 K. The values of VmE have been analyzed using Prigogine-Flory-Patterson (PFP theory. The results of the viscosity composition are discussed in the light of various viscosity equations suggested by Grunberg-Nissan, Tamara and Kurata, Hind et al., Katti and Chaudhri, Heric, Heric and Brewer, and McAllister multibody model. The values of Δlnη have also been analyzed using Bloomfield and Dewan model. The experiments on the constituted binaries are analyzed to discuss the nature and strength of intermolecular interactions in these mixtures.

  2. Excess molar properties for binary systems of alkylimidazolium-based ionic liquids + nitromethane. Experimental results and ERAS-model calculations

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Miaja, Gonzalo; Troncoso, Jacobo [Departamento de Fisica Aplicada, Universidad de Vigo, Facultad de Ciencias, Campus As Lagoas, 32004 Ourense (Spain); Romani, Luis [Departamento de Fisica Aplicada, Universidad de Vigo, Facultad de Ciencias, Campus As Lagoas, 32004 Ourense (Spain)], E-mail: romani@uvigo.es

    2009-03-15

    Density, isobaric molar heat capacity, and excess molar enthalpy were experimentally determined at atmospheric pressure for a set of binary systems ionic liquid + nitromethane. The studied ionic liquids were: 1-butyl-3-methylimidazolium tetrafluoroborate, 1-hexyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, and 1-butyl-3-methylimidazolium trifluoromethanesulfonate. Density and heat capacity were obtained within the temperature range (293.15 to 318.15) K whereas excess molar enthalpy was measured at 303.15 K; excess molar volume and excess molar isobaric heat capacity were calculated from experimental data. The ERAS-model was applied in order to study the microscopic mechanisms involved in the mixing process. Although the studied compounds are not self-associated, ERAS-model describe adequately the experimental results if cross-association between both compounds is considered.

  3. Compressed liquid densities and excess molar volumes for (CO{sub 2} + 1-pentanol) binary system at temperatures from 313 to 363 K and pressures up to 25 MPa

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Moreno, Abel [Instituto Politecnico Nacional, ESIQIE, Laboratorio de Termodinamica, Edif. Z, Secc. 6, 1er piso, UPALM Zacatenco, 07738, Lindavista, Mexico, D.F. (Mexico); Galicia-Luna, Luis A. [Instituto Politecnico Nacional, ESIQIE, Laboratorio de Termodinamica, Edif. Z, Secc. 6, 1er piso, UPALM Zacatenco, 07738, Lindavista, Mexico, D.F. (Mexico)], E-mail: lgalicial@ipn.mx; Sandler, Stanley I. [Department of Chemical Engineering, University of Delaware, Newark, DE 19716-3119 (United States)

    2008-02-15

    Measurements of compressed liquid densities for 1-pentanol and for {l_brace}CO{sub 2} (1) + 1-pentanol (2){r_brace} system were carried out at temperatures from 313 K to 363 K and pressures up to 25 MPa. Densities were measured for binary mixtures at 10 different compositions, x{sub 1} = 0.0816, 0.1347, 0.3624, 0.4651, 0.6054, 0.7274, 0.8067, 0.8573, 0.9216, and 0.9757. A vibrating tube densimeter was used to perform density measurements using two reference calibration fluids. The uncertainty is estimated to be better than {+-}0.2 kg . m{sup -3} for the experimental density measurements. For each mixture and for 1-pentanol, the experimental densities were correlated using an explicit volume equation of six parameters and an 11-parameter equation of state (EoS). Excess molar volumes were determined for the (CO{sub 2} + 1-pentanol) system using 1-pentanol densities calculated from the 11-parameter EoS and CO{sub 2} densities calculated from a multiparameter reference EoS.

  4. Partial Molar Volumes of Aqua Ions from First Principles.

    Science.gov (United States)

    Wiktor, Julia; Bruneval, Fabien; Pasquarello, Alfredo

    2017-08-08

    Partial molar volumes of ions in water solution are calculated through pressures obtained from ab initio molecular dynamics simulations. The correct definition of pressure in charged systems subject to periodic boundary conditions requires access to the variation of the electrostatic potential upon a change of volume. We develop a scheme for calculating such a variation in liquid systems by setting up an interface between regions of different density. This also allows us to determine the absolute deformation potentials for the band edges of liquid water. With the properly defined pressures, we obtain partial molar volumes of a series of aqua ions in very good agreement with experimental values.

  5. Measurement of the specific and the apparent molar volumes of ...

    African Journals Online (AJOL)

    The objective was to understand the extent to which the acids can disturb the structure of the solvent as well as affect the micellar characteristics. The specific volumes were obtained by fitting the measured viscosity data to the Einstein equation while the apparent molar volumes were obtained using the pycnometric method.

  6. Densities and Excess Molar Volume for the Ternary Systems (1 ...

    African Journals Online (AJOL)

    NICO

    2012-09-10

    Sep 10, 2012 ... catalyst to extend its life span, and as reagents for nanomaterials.2,3. The physical properties of ILs such as density, viscosity, melting point, polarity and miscibility with water or molecular solvents, can be finely tuned by changing either the anion or the cation.2–6. ILs have other properties such as very low ...

  7. ACTIVATION PARAMETERS AND EXCESS THERMODYANAMIC ...

    African Journals Online (AJOL)

    Applying these data, viscosity-B-coefficients, activation parameters (Δμ10≠) and (Δμ20≠) and excess thermodynamic functions, viz., excess molar volume (VE), excess viscosity, ηE and excess molar free energy of activation of flow, (GE) were calculated. The value of interaction parameter, d, of Grunberg and Nissan ...

  8. Prediction of Molar Volumes of the Sudanese Reservoir Fluids

    Directory of Open Access Journals (Sweden)

    A. A. Rabah

    2010-01-01

    Full Text Available This paper provided important experimental PVT data of the Sudanese reservoir fluids. It includes composition analysis of 11 mixtures and about 148 PVT data points of constant mass expansion (CME tests at pressures below the bubble point. The datasets are compared with eight equations of state (EOS, namely, Peng Robinson (PR, Soave-Redlich-Kwong (SRK, Lawal-Lake-Silberberg (LLS, Adachi-Lu-Sugie (ALS, Schmidt-Wenzel (SW, Patel-Teja (PT, Modified-Nasrifar-Moshfeghian (MNM, and Harmens-Knapp (HK. The results of comparison reveals that, with the exception of PR and ALS EOSs, all other EOSs yield consistently a higher average absolute percent deviation (AAPD in the prediction of molar volume; it exceeds 20% by all mixtures. The grand average AAPD of all mixtures is 17 and 16 for PR and ALS, respectively. ALS is selected to represents the mixtures. It is modified by replacing the coefficient (Ωb1 of the parameter (b1 in the dominator of repulsive term by that of PR. This procedure enhanced the accuracy of ALS by 30 to 90% for individual mixtures and the grand average AAPD is significantly reduced from 16 to about 7.

  9. The standard partial molar volumes of ions in N-methylpyrrolidone at 298.15 K

    Science.gov (United States)

    Novikov, A. N.

    2009-03-01

    The standard partial molar volumes of electrolytes and ions in N-methylpyrrolidone (MP) at 298.15 K are presented. Separate components of ionic volumes in solutions in MP at infinite dilution, overline {V_i^0 } , are considered. The influence of various volume effects on ion-solvent interactions is analyzed.

  10. Changes in Apparent Molar Water Volume and DKP Solubility Yield Insights on the Hofmeister Effect

    Science.gov (United States)

    Payumo, Alexander Y.; Huijon, R. Michael; Mansfield, Deauna D.; Belk, Laurel M.; Bui, Annie K.; Knight, Anne E.; Eggers, Daryl K.

    2011-01-01

    This study examines the properties of a 4 × 2 matrix of aqueous cations and anions at concentrations up to 8.0 M. The apparent molar water volume, as calculated by subtracting the mass and volume of the ions from the corresponding solution density, was found to exceed the molar volume of ice in many concentrated electrolyte solutions, underscoring the non-ideal behavior of these systems. The solvent properties of water were also analyzed by measuring the solubility of diketopiperazine (DKP) in 2.000 M salt solutions prepared from the same ion combinations. Solution rankings for DKP solubility were found to parallel the Hofmeister series for both cations and anions, whereas molar water volume concurred with the cation series only. The results are discussed within the framework of a desolvation energy model that attributes solute-specific changes in equilibria to solute-dependent changes in the free energy of bulk water. PMID:22029390

  11. A study of partial molar volumes of citric acid and tartaric acid in ...

    Indian Academy of Sciences (India)

    Unknown

    Partial molar volumes; citric acid; tartaric acid; water + ethanol mixture; structure breaker. 1. Introduction ... ity water (sp. cond. ≈ 10–6 ohm–1 cm–1) was used as standard solvent and for making binary aqueous mixtures of ethanol (EtOH). Ethyl alcohol was kept ..... temperatures meaning thereby that solute–solute in-.

  12. A study of partial molar volumes of citric acid and tartaric acid in ...

    Indian Academy of Sciences (India)

    Partial molar volumes of citric acid and tartaric acid have been determined in water and binary aqueous mixtures of ethanol (5, 10, 15, 20 and 25% by weight of ethanol) at different temperatures and acid concentrations from the solution density measurements. The data have been evaluated by using Masson equation and ...

  13. Excess Volumes, Densities, Speeds of Sound, and Viscosities for the Binary Systems of 1-Octanol with Hexadecane and Squalane at (298.15, 303.15 and 308.15) K

    Science.gov (United States)

    Dubey, Gyan P.; Sharma, Monika

    2008-08-01

    Excess molar volumes, {V_m^E } , excess molar isentropic compressibilities, {K_{S,m}^E } , and deviations of the speeds of sound, u D, from their ideal values u id in an ideal mixture for binary mixtures of 1-octanol, C8H17OH, with hexadecane, C16H34, and squalane (2,6,10,15,19,23-hexamethyltetracosane), C30H62, at T = (298.15, 303.15, and 308.15) K and at atmospheric pressure were derived from experimental density, ρ, and speed-of-sound data, u. Viscosity measurements were also carried out for the same mixtures. The Prigogine-Flory-Patterson (PFP) theory has been applied to analyze {V_m^E} of these systems. Furthermore, the apparent molar volumes, {overline{{V}}_{\\varphi ,i}^0 } and apparent molar compressibility, {overline{{K}}_{\\varphi ,i}^{ 0} } of the components at infinite dilution have been calculated.

  14. Bubble curves and saturated liquid molar volumes for chlorofluorohydrocarbon-hydrocarbon mixtures: Experimental data and modeling

    Energy Technology Data Exchange (ETDEWEB)

    Laugier, S. (Ecole Nationale Superieure de Chimie et Physique de Bordeaux, Talence (France)); Richon, D.; Renon, H. (Ecole National Superieure des Mines de Paris, Fontainebleau (France). Lab. de Thermodynamique)

    1994-01-01

    Vapor-liquid equilibria and liquid densities were obtained using a static apparatus fitted with a variable-volume cell which was described in detail by Valtz et al. (1). Results are given at four temperatures for the binary systems butane--1,2,2-trichlorotrifluoroethane, pentane--1,2-dichloro-1,1,2,2-tetrafluoroethane, hexane--1,2-dichloro-1,1,2,2-tetrafluoroethane, heptane--1,12-trichloro-1,2,2-trifluoromethane, heptane--1,2-dichloro-1,1,2,2-tetrafluoroethane, and benzene--1,2-dichloro-1,1,2,2-tetrafluoroethane and the ternary system 1,2-dichloro-1,1,2,2-tetrafluoroethane--1,1,2-trichloro-1,2,2-trifluoromethane--heptane. The best simultaneous representation of pressures and saturated liquid molar volumes at a given temperature and liquid composition for these mixtures is obtained using either the Patel-Teja or Trebble-Bishnoi-Salim equation of state (TBS EOS) in either their standard or generalized form (maximum deviation 0.7% in pressure and 3.1% in saturated liquid molar volume with the TBS EOS).

  15. Separating the contributions of the volume change upon mixing, permittivity contrast and molecular interactions in the excess relative permittivity of liquid mixtures.

    Science.gov (United States)

    Iglesias, T P; Reis, João Carlos R

    2015-05-28

    The excess relative permittivity of binary systems is separated into three parts. The excess molar volume is the basis for estimating the volume-change contribution. It is proposed to evaluate the electrical permittivity of liquid mixtures, which is solely due to the composition and the relative permittivities of pure components, named permittivity contrast contribution, using the classic local field approach in the case of point-dipoles contained in Lorentz's spherical cavities embedded in the corresponding ideal mixture. The effect of molecular interactions is simply estimated by the difference required to make up experimental excess relative permittivities. This analysis has been applied to 16 binary aqueous organic and organic-organic systems and the estimated values for the contribution of molecular interactions provide interesting insights into the molecular arrangement of these liquid mixtures and the suitability of solvents for determining solute dipole moments.

  16. The molar hydrodynamic volume changes of factor VIIa due to GlycoPEGylation

    DEFF Research Database (Denmark)

    Plesner, Bitten; Westh, Peter; Hvidt, Søren

    2011-01-01

    The effects of GlycoPEGylation on the molar hydrodynamic volume of recombinant human rFVIIa were investigated using rFVIIa and two GlycoPEGylated recombinant human FVIIa derivatives, a linear 10 kDa PEG and a branched 40 kDa PEG, respectively. Molar hydrodynamic volumes were determined by capillary...... viscometry and mass spectrometry. The intrinsic viscosities of rFVIIa, its two GlycoPEGylated compounds, and of linear 8 kDa, 10 kDa, 20 kDa and branched 40 kDa PEG polymers were determined. The measured intrinsic viscosity of rFVIIa is 6.0 mL/g, while the intrinsic viscosities of 10 kDa PEG-rFVIIa and 40 k......Da PEG-rFVIIa are 29.5 mL/g and 79.0 mL/g, respectively. The intrinsic viscosities of the linear PEG polymers are 20, 22.6 and 41.4 mL/g for 8, 10, and 20 kDa, respectively, and 61.1 mL/g for the branched 40 kDa PEG. From the results of the intrinsic viscosity and MALDI–TOF measurements it is evident...

  17. Excess molar volumes and viscosities of binary mixtures of 1, 2 ...

    Indian Academy of Sciences (India)

    The Bloomfield and Dewan model has been used to calculate viscosity coefficients and these have also been compared with experimental data for the three mixtures. The results have been discussed in terms of dipole-dipole interactions between 1,2-diethoxyethane and chloroalkanes and their magnitudes decreasing with ...

  18. Excess molar volumes and viscosities of binary mixtures of 1,2 ...

    Indian Academy of Sciences (India)

    Unknown

    dichloromethane (Qualigens, HPLC grade, minimum assay 99⋅8%) and 1,2- diethoxyethane (Lancaster ... by the method of least squares with equal weights assigned to each point. The values of coefficients ai ... where the additivity law in logarithmic form on mole fraction average was taken into account for ideal mixtures.

  19. Volume analysis of heat-induced cracks in human molars: A preliminary study.

    Science.gov (United States)

    Sandholzer, Michael A; Baron, Katharina; Heimel, Patrick; Metscher, Brian D

    2014-05-01

    Only a few methods have been published dealing with the visualization of heat-induced cracks inside bones and teeth. As a novel approach this study used nondestructive X-ray microtomography (micro-CT) for volume analysis of heat-induced cracks to observe the reaction of human molars to various levels of thermal stress. Eighteen clinically extracted third molars were rehydrated and burned under controlled temperatures (400, 650, and 800°C) using an electric furnace adjusted with a 25°C increase/min. The subsequent high-resolution scans (voxel-size 17.7 μm) were made with a compact micro-CT scanner (SkyScan 1174). In total, 14 scans were automatically segmented with Definiens XD Developer 1.2 and three-dimensional (3D) models were computed with Visage Imaging Amira 5.2.2. The results of the automated segmentation were analyzed with an analysis of variance (ANOVA) and uncorrected post hoc least significant difference (LSD) tests using Statistical Package for Social Sciences (SPSS) 17. A probability level of P models. The macroscopic heat-induced changes observed in this preliminary study correspond with previous observations of unrestored human teeth, yet the current observations also take into account the entire microscopic 3D expansions of heat-induced cracks within the dental hard tissues. Using the same experimental conditions proposed in the literature, this study confirms previous results, adds new observations, and offers new perspectives in the investigation of forensic evidence.

  20. Partial molar volumes of some drug and pro-drug substances in 1-octanol at T = 298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Manin, Alex N.; Shmukler, Liudmila E.; Safonova, Liubov P. [Institute of Solution Chemistry, Russian Academy of Sciences, 153045 Ivanovo (Russian Federation); Perlovich, German L., E-mail: glp@isc-ras.r [Institute of Solution Chemistry, Russian Academy of Sciences, 153045 Ivanovo (Russian Federation)

    2010-03-15

    The article deals with measuring the densities of phenol, acetanilide, benzamide, benzoic acid, phenacetin, i-(acetylamino)-benzoic acid, i-hydroxy-benzamide, and i-acetaminophen (where i = 1, 2, 3) in 1-octanol in the wide concentration interval at T = 298.15 K. It also concerns the evaluation of apparent molar volumes and partial molar volumes at infinite dilution, V{sub 2}{sup 0}-bar as well as comparative analysis of the free volumes per molecule in the octanolic solutions, V{sub 2}{sup free}, and in the crystal lattices, V{sub 2}{sup free} (cr), from the nature and position of the substitutes. Also described is the evaluation of the increments of V{sub 2}{sup 0}-bar andV{sub 2}{sup free} for the unsubstituted molecules and isomers and the methods to obtain partial molar volumes for various functional groups at infinite dilution in 1-octanol at T = 298.15 K. Also considered is the limiting partial molar volume of the solutes in terms of the scaled particle theory.

  1. Effect of restoration volume on stresses in a mandibular molar: a finite element study.

    Science.gov (United States)

    Wayne, Jennifer S; Chande, Ruchi; Porter, H Christian; Janus, Charles

    2014-10-01

    There can be significant disagreement among dentists when planning treatment for a tooth with a failing medium-to-large--sized restoration. The clinician must determine whether the restoration should be replaced or treated with a crown, which covers and protects the remaining weakened tooth structure during function. The purpose of this study was to evaluate the stresses generated in different sized amalgam restorations via a computational modeling approach and reveal whether a predictable pattern emerges. A computer tomography scan was performed of an extracted mandibular first molar, and the resulting images were imported into a medical imaging software package for tissue segmentation. The software was used to separate the enamel, dentin, and pulp cavity through density thresholding and surface rendering. These tissue structures then were imported into 3-dimensional computer-aided design software in which material properties appropriate to the tissues in the model were assigned. A static finite element analysis was conducted to investigate the stresses that result from normal occlusal forces. Five models were analyzed, 1 with no restoration and 4 with increasingly larger restoration volume proportions: a normal-sized tooth, a small-sized restoration, 2 medium-sized restorations, and 1 large restoration as determined from bitewing radiographs and occlusal surface digital photographs. The resulting von Mises stresses for dentin-enamel of the loaded portion of the tooth grew progressively greater as the size of the restoration increased. The average stress in the normal, unrestored tooth was 4.13 MPa, whereas the smallest restoration size increased this stress to 5.52 MPa. The largest restoration had a dentin-enamel stress of 6.47 MPa. A linear correlation existed between restoration size and dentin-enamel stress, with an R(2) of 0.97. A larger restoration volume proportion resulted in higher dentin-enamel stresses under static loading. A comparison of the von Mises

  2. Diagnostic accuracy of the defining characteristics of the excessive fluid volume diagnosis in hemodialysis patients

    Directory of Open Access Journals (Sweden)

    Maria Isabel da Conceição Dias Fernandes

    2015-12-01

    Full Text Available Objective: to evaluate the accuracy of the defining characteristics of the excess fluid volume nursing diagnosis of NANDA International, in patients undergoing hemodialysis. Method: this was a study of diagnostic accuracy, with a cross-sectional design, performed in two stages. The first, involving 100 patients from a dialysis clinic and a university hospital in northeastern Brazil, investigated the presence and absence of the defining characteristics of excess fluid volume. In the second step, these characteristics were evaluated by diagnostic nurses, who judged the presence or absence of the diagnosis. To analyze the measures of accuracy, sensitivity, specificity, and positive and negative predictive values were calculated. Approval was given by the Research Ethics Committee under authorization No. 148.428. Results: the most sensitive indicator was edema and most specific were pulmonary congestion, adventitious breath sounds and restlessness. Conclusion: the more accurate defining characteristics, considered valid for the diagnostic inference of excess fluid volume in patients undergoing hemodialysis were edema, pulmonary congestion, adventitious breath sounds and restlessness. Thus, in the presence of these, the nurse may safely assume the presence of the diagnosis studied.

  3. Blending Octane Number of Ethanol on a Volume and Molar Basis in SI and HCCI Combustion Modes

    KAUST Repository

    Waqas, Muhammad Umer

    2017-10-08

    The blending behavior of ethanol in five different hydrocarbon base fuels with octane numbers of approximately 70 and 84 was examined under Spark-Ignited (SI) and Homogeneous Charge Compression Ignited (HCCI) operating conditions. The Blending octane number (BON) was used to characterize the blending behavior on both a volume and molar basis. Previous studies have shown that the blending behavior of ethanol generally follows several well-established rules. In particular, non-linear blending effects are generally observed on a volume basis (i.e. BON > RON or MON of pure ethanol; 108 and 89, respectively), while linear blending effects are generally observed on a molar basis (i.e. BON = RON or MON of pure ethanol). This work firstly demonstrates that the non-linear volumetric blending effects traditionally observed under SI operating conditions are also observed under HCCI operating conditions. In keeping with previous studies, the degree of this non-linearity is shown to be a function of the base fuel composition and octane number. By contrast, the molar blending approach is shown to behave differently depending on the chosen combustion mode, with some non-linearity observed under HCCI operating conditions (i.e. BON RON or MON of pure ethanol). This suggests that the well-established blending rules for SI operating conditions may not always be relevant to other combustion modes that operate with globally lean or diluted air-fuel mixtures. This has implications for the design of future fuel specifications.

  4. Prevalence of nursing diagnosis of fluid volume excess in patients undergoing hemodialysis

    Directory of Open Access Journals (Sweden)

    Maria Isabel da Conceição Dias Fernandes

    2014-06-01

    Full Text Available Objective: To identify the prevalence of nursing diagnosis of fluid volume excess and their defining characteristics in hemodialysis patients and the association between them. Method: Cross-sectional study conducted in two steps. We interviewed 100 patients between the months of December 2012 and April 2013 in a teaching hospital and one hemodialysis clinic. The inference was performed by diagnostician nurses between July and September 2013. Results: The diagnostic studied was identified in 82% of patients. The characteristics that were statistically associated: bounding pulses, pulmonary congestion, jugular vein distention, edema, change in electrolytes, weight gain, intake greater than output and abnormal breath sounds. Among these, edema and weight gain had the highest chances for the development of this diagnostic. Conclusion: The analyzed diagnostic is prevalent in this population and eight characteristics presented significant association.

  5. Excess enthalpy, density, and heat capacity for binary systems of alkylimidazolium-based ionic liquids + water

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Miaja, Gonzalo; Troncoso, Jacobo [Departamento de Fisica Aplicada, Universidad de Vigo, Facultad de Ciencias, Campus As Lagoas, 32004 Ourense (Spain); Romani, Luis [Departamento de Fisica Aplicada, Universidad de Vigo, Facultad de Ciencias, Campus As Lagoas, 32004 Ourense (Spain)], E-mail: romani@uvigo.es

    2009-02-15

    Experimental measurements of excess molar enthalpy, density, and isobaric molar heat capacity are presented for a set of binary systems ionic liquid + water as a function of temperature at atmospheric pressure. The studied ionic liquids are 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. Excess molar enthalpy was measured at 303.15 K whereas density and heat capacity were determined within the temperature range (293.15 to 318.15) K. From experimental data, excess molar volume and excess molar isobaric heat capacity were calculated. The analysis of the excess properties reveals important differences between the studied ionic liquids which can be ascribed to their capability to form hydrogen bonds with water molecules.

  6. Influence of Zinc on the Surface Tension, Density and Molar Volume of (Ag-Sneut +Zn Liquid Alloys

    Directory of Open Access Journals (Sweden)

    Gąsior W.

    2016-03-01

    Full Text Available The dilatometric and maximum bubble pressure methods were applied for the measurements of the density and surface tension of liquid (Ag-Sneut +Zn lead-free solders. The experiments were carried out in the temperature range from 515 to 1223 K for the alloys of the zinc concentration equaling 0.01, 0.02, 0.04, 0.05, 0.1 and 0.2 of the mole fraction. It was found that the temperature dependence of both the density and the surface tension could be thought as linear, so they were interpreted by straight line equations. The experimental data of the molar volume of the investigated alloys were described by the polynomial dependent on the composition and temperature.

  7. Volumetry of human molars with flat panel-based volume CT in vitro

    NARCIS (Netherlands)

    Hannig, C.; Krieger, E.; Dullin, C.; Merten, H.A.; Attin, T.; Grabbe, E.; Heidrich, G.

    2006-01-01

    The flat panel-based volume computed tomography (fpVCT) is a new CT device applicable for experimental, three-dimensional evaluation of teeth at a resolution of about 150 microm in the high contrast region. The aim of this study was to investigate whether fpVCT was suitable for quantification of the

  8. Investigation of molar volume and surfactant characteristics of water-soluble organic compounds in biomass burning aerosol

    Directory of Open Access Journals (Sweden)

    A. Asa-Awuku

    2008-02-01

    Full Text Available In this study, we characterize the CCN activity of the water-soluble organics in biomass burning aerosol. The aerosol after collection upon filters is dissolved in water using sonication. Hydrophobic and hydrophilic components are fractionated from a portion of the original sample using solid phase extraction, and subsequently desalted. The surface tension and CCN activity of these different samples are measured with a KSV CAM 200 goniometer and a DMT Streamwise Thermal Gradient CCN Counter, respectively. The measurements show that the strongest surfactants are isolated in the hydrophobic fraction, while the hydrophilics exhibit negligible surface tension depression. The presence of salts (primarily (NH42SO4 in the hydrophobic fraction substantially enhances surface tension depression; their synergistic effects considerably enhance CCN activity, exceeding that of pure (NH42SO4. From our analysis, average thermodynamic properties (i.e, molar volume are determined for samples using our newly developed Köhler Theory Analysis (KTA method. The molar mass of the hydrophilic and hydrophobic aerosol components is estimated to be 87±26 g mol−1 and 780±231 g mol−1, respectively. KTA also suggests that the relative proportion (in moles of hydrophobic to hydrophilic compounds in the original sample to be 1:3. For the first time, KTA is applied to an aerosol with this level of complexity and displays its potential for providing physically-based constraints for GCM parameterizations of the aerosol indirect effect.

  9. Molecular simulation of excess isotherm and excess enthalpy change in gas-phase adsorption.

    Science.gov (United States)

    Do, D D; Do, H D; Nicholson, D

    2009-01-29

    We present a new approach to calculating excess isotherm and differential enthalpy of adsorption on surfaces or in confined spaces by the Monte Carlo molecular simulation method. The approach is very general and, most importantly, is unambiguous in its application to any configuration of solid structure (crystalline, graphite layer or disordered porous glass), to any type of fluid (simple or complex molecule), and to any operating conditions (subcritical or supercritical). The behavior of the adsorbed phase is studied using the partial molar energy of the simulation box. However, to characterize adsorption for comparison with experimental data, the isotherm is best described by the excess amount, and the enthalpy of adsorption is defined as the change in the total enthalpy of the simulation box with the change in the excess amount, keeping the total number (gas + adsorbed phases) constant. The excess quantities (capacity and energy) require a choice of a reference gaseous phase, which is defined as the adsorptive gas phase occupying the accessible volume and having a density equal to the bulk gas density. The accessible volume is defined as the mean volume space accessible to the center of mass of the adsorbate under consideration. With this choice, the excess isotherm passes through a maximum but always remains positive. This is in stark contrast to the literature where helium void volume is used (which is always greater than the accessible volume) and the resulting excess can be negative. Our definition of enthalpy change is equivalent to the difference between the partial molar enthalpy of the gas phase and the partial molar enthalpy of the adsorbed phase. There is no need to assume ideal gas or negligible molar volume of the adsorbed phase as is traditionally done in the literature. We illustrate this new approach with adsorption of argon, nitrogen, and carbon dioxide under subcritical and supercritical conditions.

  10. MOLAR UPRIGHTING

    Directory of Open Access Journals (Sweden)

    Eka Erwansyah

    2006-04-01

    Full Text Available The mesial tipping of molar is frequently found in orthodontic cases. This molar malposition must be corrected since it may cause periodontal disorders, occlusal interferences, and temporomandibular joint dysfunction, and is often needed in planning a fixed bridge. This paper is a literature study to discuss about appliance designs, indication, and contraindications, and complication and treatment protocols of molar uprighting by fixed orthodontic appliances. By knowing the techniques of molar uprighting, the moments mentioned above can be avoided.

  11. Dissipative particle dynamics parameterization and simulations to predict negative volume excess and structure of PEG and water mixtures

    Science.gov (United States)

    Kacar, Gokhan

    2017-12-01

    We report the results of dissipative particle dynamics (DPD) parameterization and simulations of a mixture of hydrophilic polymer, PEG 400, and water which are known to exhibit negative volume excess property upon mixing. The addition of a Morse potential to the conventional DPD potential mimics the hydrogen bond attraction, where the parameterization takes the internal chemistry of the beads into account. The results indicate that the mixing of PEG and water are maintained by the influence of hydrogen bonds, and the mesoscopic structure is characterized by the trade-off of enthalpic and entropic effects.

  12. Prediction method for the volume of the excess post-exercise oxygen consumption (EPOC) following supramaximal exercise.

    Science.gov (United States)

    Stefanova, D

    2000-01-01

    Short (up to 60 s) supramaximal (about 400 W on the average) exercise is accompanied by specific biochemical processes in the working muscles and by a general increase in energy metabolism. Outwardly, this is manifested by an excess post-exercise oxygen consumption (EPOC). Since its actual measurement is time consuming and associated sometimes with difficulties, we propose a fixed 3-min test for EPOC prediction. The measured volumes of oxygen consumption are related to the corresponding periods in a coordinate system as reciprocal values. The linear equation, whose parameters were calculated by the method of least squares or were determined graphically, provided for prediction of the EPOC volume with satisfactory accuracy and precision. The obtained increase of the predicted values over the actually measured values was below 5%, and the correlation coefficient r = 0.98. Other parameters of the recovery process were also calculated, such as tau (half-time) of EPOC and the rate constant k.

  13. Evaluation of Excess Free Volume and Internal Pressure in Binary Mixtures of Methyl Methacrylate(MMA with Alcohols

    Directory of Open Access Journals (Sweden)

    R. Vadamalar

    2009-01-01

    Full Text Available Methyl methacrylate (MMA is an important monomer attracting the attention of industrialists and scientists because of its various applications and reactivity. The knowledge of thermodynamic and transport properties of MMA in alcohols and other organic solvents is useful in industrial processes. Ultrasonic and viscometric parameters offer simple, easy and accurate ways for calculating several physical parameters which throw light on molecular interactions in solutions. In this paper, the interactions of two alcohols; tert-butanol and iso-butanol with MMA are reported for the first time. Comparison has been made on the interactive nature of the two alcohols. Computation of free volume, internal pressure and excess free volume has been made for the entire concentration range. Existence of mesomeric effects of MMA is clearly seen and the role of structure of alcohols is observed.

  14. Thermodynamics of aqueous uranyl ion: Apparent and partial molar heat capacities and volumes of aqueous uranyl perchlorate from 10 to 55°C

    Science.gov (United States)

    Hovey, Jamey K.; Nguyen-Trung, Chinh; Tremaine, Peter R.

    1989-07-01

    Apparent molar heat capacities and volumes of aqueous solutions containing UO2(ClO4)2 in dilute (≈0.06 molal) HClO4 have been determined from 10 to 55°C. These results have been analyzed using Young's rule to obtain apparent molar volumes and heat capacities for the solute UO2(ClO42). The temperature dependences of the conventional standard-state heat capacity and volume functions for UO22+ (aq) are well represented by the following equations: V¯°/cm(30 mo1P-1) -80.94 + 0.6091 T - 0.001063T2 andC¯/p0/(J K-1 mol-1) = 350.5 - 0.8722T - 5308/T -90) that are valid from 10 to 55°C. These results differ substantially from results of earlier measurements employing different uranyl salts. These differences are likely due to the presence of ion-paired or hydrolyzed U (VI) species in the earlier studies.

  15. Apparent molar volumes and viscosity B-coefficients of glycine in aqueous silver sulphate solutions at T = (298.15, 308.15, 318.15) k.

    Science.gov (United States)

    Sinha, Biswajit; Roy, Pran Kumar; Roy, Mahendra Nath

    2010-09-01

    Apparent molar volumes (φV) and viscosity B-coefficients for glycine in 0.005, 0.010, 0.015, and 0.020 mol dm-3 aqueous silver sulphate (Ag2SO4) solutions have been determined from solution density and viscosity measurements at (298.15, 308.15, and 318.15) K as a function of glycine concentration. The standard partial molar volume (φV0) and experimental slopes (SV*) obtained from the Masson equation have been interpreted in terms of solute-solvent and solute-solute interactions, respectively. The viscosity data were analyzed using the Jones-Dole equation, and the derived parameters A and B were interpreted in terms of solute-solute and solute-solvent interactions, respectively. The standard volumes of transfer (ΔφV0) and viscosity B-coefficients of transfer (ΔB) of glycine from water to aqueous Ag2SO4 solutions were derived to study various interactions in the ternary solutions. The structure making or breaking ability of glycine has been discussed in terms of the sign of (δ2φV0/δT2)P. The activation parameters of viscous flow for the ternary solutions were also calculated and explained in terms of transition state theory.

  16. A Comparison of Different Volumes of Articaine for Inferior Alveolar Nerve Block for Molar Teeth with Symptomatic Irreversible Pulpitis.

    Science.gov (United States)

    Abazarpoor, Ramin; Parirokh, Masoud; Nakhaee, Nouzar; Abbott, Paul V

    2015-09-01

    Achieving anesthesia in mandibular molar teeth with irreversible pulpitis is very difficult. The aim of this study was to compare the efficacy of 1.8 mL and 3.6 mL articaine for an inferior alveolar nerve block (IANB) when treating molars with symptomatic irreversible pulpitis. In a randomized, double-blind clinical trial, 82 first mandibular molar teeth with symptomatic irreversible pulpitis randomly received conventional IANB injection either with 1 (1.8 mL) or 2 cartridges (3.6 mL) of 4% articaine with 1:100,000 epinephrine. The patients recorded their pain before and during access cavity preparation as well as during root canal instrumentation using a Heft-Parker visual analog scale. No or mild pain was considered as successful anesthesia. Data were analyzed by t and chi-square tests. Eighty patients were eligible to participate in this study, which showed that 3.6 mL articaine provided a significantly higher success rate (77.5%) of IANBs compared with 1.8 mL of the same anesthetic solution (27.5%) although neither group had 100% successful anesthesia (P irreversible pulpitis, but it did not result in 100% anesthetic success. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  17. Molar Pregnancy

    Science.gov (United States)

    ... Vaginal bleeding Molar pregnancy Symptoms & causes Diagnosis & treatment Advertisement Mayo Clinic does not endorse companies or products. ... a Job Site Map About This Site Twitter Facebook Google YouTube Pinterest Mayo Clinic is a not- ...

  18. Excess enthalpy, density, and speed of sound determination for the ternary mixture (methyl tert-butyl ether + 1-butanol + n-hexane)

    Energy Technology Data Exchange (ETDEWEB)

    Mascato, Eva [Departamento de Fisica Aplicada, Facultade de Ciencias, Universidade de Vigo, E-36310 Vigo (Spain); Mariano, Alejandra [Laboratorio de Fisicoquimica, Departamento de Quimica, Facultad de Ingenieria, Universidad Nacional del Comahue, 8300 Neuquen (Argentina); Pineiro, Manuel M. [Departamento de Fisica Aplicada, Facultade de Ciencias, Universidade de Vigo, E-36310 Vigo (Spain)], E-mail: mmpineiro@uvigo.es; Legido, Jose Luis [Departamento de Fisica Aplicada, Facultade de Ciencias, Universidade de Vigo, E-36310 Vigo (Spain); Paz Andrade, M.I. [Departamento de Fisica Aplicada, Facultade de Fisica, Universidade de Santiago de Compostela, E-15706 Santiago de Compostela (Spain)

    2007-09-15

    Density, ({rho}), and speed of sound, (u), from T = 288.15 to T = 308.15 K, and excess molar enthalpies, (h{sup E}) at T = 298.15 K, have been measured over the entire composition range for (methyl tert-butyl ether + 1-butanol + n-hexane). In addition, excess molar volumes, V{sup E}, and excess isentropic compressibility, {kappa}{sub s}{sup E}, were calculated from experimental data. Finally, experimental excess enthalpies results are compared with the estimations obtained by applying the group-contribution models of UNIFAC (in the versions of Dang and Tassios, Larsen et al., Gmehling et al.), and DISQUAC.

  19. Excess properties and vapour pressure of left brace3-diethylaminopropylamine + cyclohexaneright brace

    Energy Technology Data Exchange (ETDEWEB)

    Khimeche, Kamel, E-mail: kamel.khimeche@yahoo.f [Ecole Militaire Polytechnique EMP, BP 17 Bordj-El-Bahri, Alger (Algeria); Dahmani, Abdallah [Laboratoire de thermodynamique et modelisation moleculaire, Faculte de chimie, USTHB, BP 32 El-Alia, 16111 Bab-Ezzouar, Alger (Algeria); Mokbel, Ilham [Laboratoire de chimie analytique I, Universite Claude Bernard (Lyon I), 43, bd du 11 Novembre 1918 69622 Villeurbanne (France)

    2010-07-15

    The vapour pressures of liquid left brace3-diethylaminopropylamine (3-DEPA) + cyclohexaneright brace were measured by a static method between T = (273.15 and 363.15) K at 10 K intervals. The excess molar volumes V{sup E} at 298.15 K and excess molar enthalpies H{sup E} at 303.15 K were also measured. The molar excess Gibbs free energies G{sup E} were obtained with Barker's method and fitted to the Redlich-Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G{sup E} and H{sup E}, by using DISQUAC model, were evaluated

  20. Thermodynamique des systèmes micellaires Partie 1 : Volumes ...

    African Journals Online (AJOL)

    ... a flow densimeter. Results were analysed according to the mass-action model. The first and some times the second micellar critical concentrations were determined. The apparent and partial molar volumes were calculated as well as the excess volumes. The solute-solute and solute solvent interactions were discussed.

  1. Deciduous molar hypomineralization and molar incisor hypomineralization

    NARCIS (Netherlands)

    Elfrink, M.E.C.; ten Cate, J.M.; Jaddoe, V.W.V.; Hofman, A.; Moll, H.A.; Veerkamp, J.S.J.

    2012-01-01

    This study was embedded in the Generation R Study, a population-based prospective cohort study from fetal life until young adulthood. This study focused on the relationship between Deciduous Molar Hypomineralization (DMH) and Molar Incisor Hypomineralization (MIH). First permanent molars develop

  2. Densities and volume properties of (water + tert-butanol) over the temperature range of (274.15 to 348.15) K at pressure of 0.1 MPa

    Energy Technology Data Exchange (ETDEWEB)

    Egorov, Gennadiy I., E-mail: gie@isc-ras.r [Laboratory of Structure and Dynamics of Molecular and Ion-Molecular Solutions, Institute of Solution Chemistry, Russian Academy of Sciences, 1 Akademicheskaya Street, 153045 Ivanovo (Russian Federation); Makarov, Dmitriy M. [Laboratory of Structure and Dynamics of Molecular and Ion-Molecular Solutions, Institute of Solution Chemistry, Russian Academy of Sciences, 1 Akademicheskaya Street, 153045 Ivanovo (Russian Federation)

    2011-03-15

    The densities of {l_brace}water (1) + tert-butanol (2){r_brace} binary mixture were measured over the temperature range (274.15 to 348.15) K at atmospheric pressure using 'Anton Paar' digital vibrating-tube densimeter. Density measurements were carried out over the whole concentration range at (308.15 to 348.15) K. The following volume parameters were calculated: excess molar volumes and thermal isobaric expansivities of the mixture, partial molar volumes and partial molar thermal isobaric expansivities of the components. Concentration dependences of excess molar volumes were fitted with Redlich-Kister equation. The results of partial molar volume calculations using four equations were compared. It was established that for low alcohol concentrations at T {<=} 208 K the inflection points at x{sub 2} {approx} 0.02 were observed at concentration dependences of specific volume. The concentration dependences of partial molar volumes of both water and tert-butanol had extremes at low alcohol content. The temperature dependence of partial molar volumes of water had some inversion at x{sub 2} {approx} 0.65. The temperature dependence of partial molar volumes of tert-butanol at infinite dilution had minimum at {approx}288 K. It was discovered that concentration dependences of thermal isobaric expansivities of the mixture at small alcohol content and low temperatures passed through minimum.

  3. Pressão interna e refração molar dos sistemas dimetilsulfóxido + tiofeno, dimetilsulfóxido + piridina a 298,15K

    OpenAIRE

    AZNAREZ, Silvia Beatriz; POSTIGO, Miguel Ángelo; MARTINS, Adair

    1999-01-01

    Pressão interna, volume livre, refração molar e propriedades termodinâmicas de excesso de misturas líquidas binárias de dimetil sulfóxido + tiofeno e dimetil sulfóxido + piridina a 298.15K foram calculadas a partir de medidas experimentais de densidades, tensão superficial e índice de refração. A relação entre a pressão interna, volume molar de excesso, refração molar, e a interação molecular dos sistemas binários é examinada. Internal pressure, free volume, molar refraction and excess mol...

  4. Partial molar volume of paracetamol in water, 0.1 M HCl and 0.154 M NaCl at T = (298.15, 303.15, 308.15 and 310.65) K and at 101.325 kPa

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, Muhammad Javed [Department of Chemistry, Quaid-i-Azam University, Islamabad, Capital 54320 (Pakistan)]. E-mail: mjiqauchem@yahoo.com; Malik, Qaisar Mahmood [Department of Chemistry, Quaid-i-Azam University, Islamabad, Capital 54320 (Pakistan)]. E-mail: qaisar_@hotmail.com

    2005-12-15

    The apparent molar volume of paracetamol (4-acetamidophenol) in water, 0.1 M HCl and 0.154 M NaCl as solvents at (298.15, 303.15, 308.15 and 310.65) K temperatures and at a pressure of 101.325 kPa were determined from the density data obtained with the help of a vibrating-tube Anton Paar DMA-48 densimeter. The partial molar volume, V {sub m}, of paracetamol in these solvents at different temperatures was evaluated by extrapolating the apparent molar volume versus molality plots to m = 0. In addition, the partial molar expansivity, E {sup .}, the isobaric coefficient of thermal expansion, {alpha} {sub p}, and the interaction coefficient, S {sub v}, have also been computed. The expansivity data show dependence of E {sup .} values on the structure of the solute molecules.

  5. Cálculo do Volume Molar de um Gás de van der Waals em SCILAB: o Método Newton-Raphson na Resolução de um Problema Físico-Químico

    Directory of Open Access Journals (Sweden)

    Diogenes Filho

    2014-07-01

    Full Text Available The use of software in chemical calculations is a constant reality in both laboratories as well as in simulation processes of chemical transformations. Around addition, this publication discusses the use of the computer program in Scilab problems of chemical origin, especially in the case of calculating the molar volume of gas van der Waals forces. Discussions on the results of the use of this program with a view to the tools available for the calculation of a polynomial provide satisfactory conclusions on the use of mathematical methods in Physical Chemistry, especially the Newton-Raphson method.

  6. Excessively High Hydration Volume May Not Be Associated With Decreased Risk of Contrast-Induced Acute Kidney Injury After Percutaneous Coronary Intervention in Patients With Renal Insufficiency.

    Science.gov (United States)

    Liu, Yong; Li, Hualong; Chen, Shiqun; Chen, Jiyan; Tan, Ning; Zhou, Yingling; Liu, Yuanhui; Ye, Piao; Ran, Peng; Duan, Chongyang; Chen, Pingyan

    2016-05-27

    No well-defined protocols currently exist regarding the optimal rate and duration of normal saline administration to prevent contrast-induced acute kidney injury (CI-AKI) in patients with renal insufficiency. Hydration volume ratios (hydration volume/weight; HV/W) were calculated in 1406 patients with renal insufficiency (estimated glomerular filtration rate [eGFR], 0.05) and even increased CI-AKI risk (HV/W >25 mL/kg: adjusted OR, 2.11; 95% CI, 1.24-3.59; P=0.006). Additionally, higher HV/W was significantly associated with an increased risk of death (Q4 vs Q1: adjusted hazard ratio, 3.44; 95% CI, 1.20-9.88; P=0.022). Excessively high hydration volume at routine speed might be associated with increased risk of CI-AKI and death post-PCI in patients with renal insufficiency. © 2016 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  7. Excess volumes of 1-butanol, 2-butanol, 2-methylpropan-1-ol, and 2-methylpropan-2-ol with xylenes at 308.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Bhardwaj, U.; Maken, S.; Singh, K.C. [Maharshi Dayanand Univ., Rohtak (India). Dept. of Chemistry

    1996-09-01

    The excess volumes V{sup E} for 1-butanol or 2-butanol or 2-methylpropan-1-ol or 2-methylpropan-2-ol + o-xylene or m-xylene or p-xylene at 308.15 K have been measured over the whole range of composition. The V{sup E} vs composition curves are skewed toward the low concentration of butanol. For systems containing 1-butanol curves are sigmoids and V{sup E} values change sign in the 1-butanol (1) rich region (x{sub 1} > 0.8). For butanol + xylene systems V{sup E} values vary in the order 2-methylpropan-2-ol > 2-butanol > 2-methylpropan-1-ol > 1-butanol.

  8. Excessive somnolence

    Directory of Open Access Journals (Sweden)

    Stella Tavares

    Full Text Available Excessive somnolence can be quite a incapacitating manifestation, and is frequently neglected by physicians and patients. This article reviews the determinant factors, the evaluation and quantification of diurnal somnolence, and the description and treatment of the main causes of excessive somnolence.

  9. Excessive somnolence.

    Science.gov (United States)

    Tavares, S; Alóe, F; Gentil, V; Scaff, M

    1996-01-01

    Excessive somnolence can be quite a incapacitating manifestation, and is frequently neglected by physicians and patients. This article reviews the determinant factors, the evaluation and quantification of diurnal somnolence, and the description and treatment of the main causes of excessive somnolence.

  10. Second molar germectomy and third molar eruption. 11 cases of lower second molar enucleation.

    Science.gov (United States)

    Gaumond, G

    1985-01-01

    Eleven cases followed from enucleation of the unerupted lower second molars through third molar eruption. While results were generally good, three presented third molar malpositions requiring further treatment.

  11. [Hyperthyroidism in molar pregnancy].

    Science.gov (United States)

    Boufettal, H; Mahdoui, S; Noun, M; Hermas, S; Samouh, N

    2014-03-01

    Hyperthyroidism is a rare complication of molar pregnancy. We report a 39-year-old woman who presented a thyrotoxic syndrome accompanying a molar pregnancy. Serum thyroid hormones were elevated and returned to normal level after uterine evacuation of a molar pregnancy. The authors detail the role of thyroid stimulating property of human gonadotropin chorionic hormone and its structural changes during the gestational trophoblastic diseases. These changes give the latter the thyroid stimulating properties and signs of hyperthyroidism. Molar pregnancy may be a cause of hyperthyroidism. The diagnosis of molar pregnancy should be a mention to thyrotoxicosique syndrome in a woman of childbearing age. Copyright © 2013. Published by Elsevier SAS.

  12. The studies of density, apparent molar volume, and viscosity of bovine serum albumin, egg albumin, and lysozyme in aqueous and RbI, CsI, and DTAB aqueous solutions at 303.15 K.

    Science.gov (United States)

    Singh, Man; Chand, Hema; Gupta, K C

    2005-06-01

    Density (rho), apparent molar volume (V(phi)), and viscosity (eta) of 0.0010 to 0.0018% (w/v) of bovine serum albumin (BSA), egg albumin, and lysozyme in 0.0002, 0.0004, and 0.0008 M aqueous RbI and CsI, and (dodecyl)(trimethyl)ammonium bromide (DTAB) solutions were obtained. The experimental data were regressed against composition, and constants are used to elucidate the conformational changes in protein molecules. With salt concentration, the density of proteins is found to decrease, and the order of the effect of additives on density is observed as CsI > RbI > DTAB. The trend of apparent molar volume of proteins is found as BSA > egg-albumin > lysozyme for three additives. In general, eta values of BSA remain higher for all compositions of RbI than that of egg-albumin for CsI and DTAB. These orders of the data indicate the strength of intermolecular forces between proteins and salts, and are helpful for understanding the denaturation of proteins.

  13. Sextant of Sapphires for Molar Distalization.

    Science.gov (United States)

    Ponnada, Swaroopa Rani; Palla, Yudistar Venkata; Ganugapanta, Vivek Reddy

    2016-08-01

    Space analysis quantifies the amount of crowding within the arches estimating the severity of space discrepancy. The space gaining procedures include extraction and non-extraction procedures like expansion, proximal stripping and molar distalization. To identify features seen in molar distalization cases. The sample size comprised 20 patients in whom molar distalization was decided as the treatment plan. The study models and lateral cephalograms of all the patients were taken. Occlusograms were obtained. Model analysis and cephalometric analysis were performed. Descriptive statistical analysis like mean, standard deviation, standard error and mode were done. The parameters in Question gave following results. The Bolton analysis showed anterior mandibular excess with mean value of 1.56mm±1.07. The first order discrepancy between maxillary central and lateral incisors was 5±1.95. The premolar rotation showed mean value of 16.58±5.12. The molar rotation showed the value of 7.66±2.26. The nasolabial angle showed the mean of 101.25±8.7 IMPA of 101.4±5.74. The six features studied in molar distalization cases [First order discrepancy between upper central and lateral incisors; Rotation of premolars and molars; Bolton's discrepancy in anterior dentition; Average to horizontal growth pattern; Proclined lower incisors and Obtuse nasolabial angle] can be taken as patterns seen in molar distalization cases and considered as a valid treatment plan.

  14. Apparent molar volumes and apparent molar heat capacities of aqueous N-acetyl-D-glucosamine at temperatures from 278.15 K to 368.15 K and of aqueous N-methylacetamide at temperatures from 278.15 K to 393.15 K at the pressure 0.35 MPa

    Energy Technology Data Exchange (ETDEWEB)

    Swenson, D.M. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States); Ziemer, S.P. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States); Blodgett, M.B. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States); Jones, J.S. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States); Woolley, E.M. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States)]. E-mail: earl_woolley@byu.edu

    2006-12-15

    We determined apparent molar volumes V {sub {phi}} from densities measured with a vibrating-tube densimeter at 278.15 {<=} (T/K) {<=} 368.15 and apparent molar heat capacities C {sub p,{phi}} with a twin fixed-cell, differential, temperature-scanning calorimeter at 278.15 {<=} (T/K) {<=} 363.15 for aqueous solutions of N-acetyl-D-glucosamine at m from (0.01 to 1.0) mol . kg{sup -1} and at p = 0.35 MPa. We also determined V {sub {phi}} at 278.15 {<=} (T/K) {<=} 368.15 and C {sub p,{phi}} at 278.15 {<=} (T/K) {<=} 393.15 for aqueous solutions of N-methylacetamide at m from (0.015 to 1.0) mol . kg{sup -1} and at p = 0.35 MPa. Empirical functions of m and T for each compound were fitted to our results, which are then compared to those for N,N-dimethylacetamide. Estimated values of {delta}{sub r} V {sub m}(m, T) and {delta}{sub r} C {sub p,m}(m, T) for formation of aqueous N-acetyl-D-glucosamine from aqueous D-glucose and aqueous acetamide are calculated and discussed.

  15. Removable molar power arm

    Directory of Open Access Journals (Sweden)

    Raj Kumar Verma

    2013-01-01

    Full Text Available Attachment of force elements from the gingival hook of maxillary molar tubes during the retraction of the anterior teeth is very common in orthodontic practice. As the line of force passes below the center of resistance (CR of molar, it results its mesial tipping and also anchorage loss. To overcome this problem, the line of force should pass along the CR of molar. This article highlights a method to overcome this problem by attaching a removable power arm to the headgear tube of molar tube during the retraction of the anterior teeth.

  16. Ruptured tubal molar pregnancy

    African Journals Online (AJOL)

    2011-05-19

    May 19, 2011 ... Nigerian Journal of Clinical Practice • Oct-Dec 2012 • Vol 15 • Issue 4. Yakasai, et al.: Tubal molar pregnancy follow-up using serial βhCG measurements similar to other trophoblastic tumors.[6] The outcome of the treatment of these patients is similar to those coming with non-molar ectopic gestation.

  17. Thirst - excessive

    Science.gov (United States)

    ... to fluid loss during exercise or to eating salty foods. ... Causes may include: A recent salty or spicy meal Bleeding enough to cause a large decrease in blood volume Diabetes mellitus Diabetes insipidus Medicines such as anticholinergics, ...

  18. Biomechanics in Molar Control

    OpenAIRE

    Rendón Giraldo, Juan Esteban; Castaño, Gabriel

    2014-01-01

    Inadequate molar control is one of the difficulties that arise during mechanical treatment. When molar control is handled efficiently, it facilitates precise control of forces and moments, which increases the effectiveness of biomechanics. Knowledge of 4 x 2, 6 x 2 partial systems and the transpalatal bar with its different forms of activation offer a number of advantages that make it possible to optimize orthodontic results. The aim of this article is to clarify concepts, specify possible tr...

  19. Third molar infections.

    Science.gov (United States)

    Gutiérrez-Pérez, José Luis

    2004-01-01

    Pericoronitis is an infectious disease often associated with the eruption of a third molar. It can be either acute (serous and suppurative) or chronic. Pain is usually the predominant symptom in acute stages, whereas chronic forms of the disease may display very few symptoms. Both present exudate. The infection is multimicrobial, predominantly caused strictly by betalactamase-producing anaerobeic microorganisms. Treatment measures are symptomatic, antimicrobial and surgical. Antimicrobial treatment is indicated for preoperative prophylaxis when there is a high risk of postoperative infection and, during the acute stages of suppurative pericoronitis when surgery must be postponed. First-line treatment in this case consists of amoxicillin with associated clavulanic acid. Although surgical treatment of pericoronitis presenting at the third molar is indicated as a Grade C recommendation for extraction, it is the most common indication for extraction of a retained third molar, owing to the improved quality of life it can offer the patient.

  20. 7 CFR 985.56 - Excess oil.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess oil. 985.56 Section 985.56 Agriculture... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Order Regulating Handling Volume Limitations § 985.56 Excess oil. Oil of any class in excess of a producer's applicable annual allotment shall be identified as...

  1. VAPOR PRESSURES, LIQUID MOLAR VOLUMES, VAPOR NON- IDEALITIES, AND CRITICAL PROPERTIES OF SOME FLUORINATED ETHERS: CF3OCF2OCF3, CF3OCF2 CF2H, c-CF2CF2CF2O, CF3OCF2H, AND CF3OCH3; AND OF CCl3F AND CF2ClH

    Science.gov (United States)

    Vapor pressures, compressibilities, expansivities, and molar volumes of the liquid phase have been measured between room temperature and the critical temperature for a series of fluorinated ethers: CF3OCF2OCF3, CF3OCF2CF2H, c-CF2CF2CF2O, CF3OCF2H, and CF3OCH3. Vapor-phase non-ide...

  2. Taurodontism in deciduous molars.

    Science.gov (United States)

    Bafna, Yash; Kambalimath, H V; Khandelwal, Vishal; Nayak, Prathibha

    2013-06-03

    Taurodont teeth are characterised by large pulp chambers at the expense of roots. An enlarged pulp chamber, apical displacement of the pulpal floor and no constriction at the level of the cement-enamel junction are the characteristic features of taurodont tooth. It appears more frequently as an isolated anomaly but its association with syndromes and other abnormalities have also been reported. Permanent dentition is more commonly affected than deciduous dentition. This paper presents a case report of taurodontism in relation to mandibular deciduous second molars.

  3. Thermodynamics of the first and second proton dissociations from aqueous L-aspartic acid and L-glutamic acid at temperatures from (278.15 to 393.15) K and at the pressure 0.35 MPa: Apparent molar heat capacities and apparent molar volumes of zwitterionic, protonated cationic, and deprotonated anionic forms at molalities from (0.002 to 1.0) mol . kg{sup -1}

    Energy Technology Data Exchange (ETDEWEB)

    Ziemer, S.P. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States); Woolley, E.M. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT 84602-5700 (United States)]. E-mail: earl_woolley@byu.edu

    2007-04-15

    We have measured the densities of aqueous solutions of L-aspartic acid, L-glutamic acid, and equimolal solutions of these two amino acids with HCl and with NaOH at temperatures 278.15 {<=} T/K {<=} 368.15, at molalities 0.002 {<=} m/mol . kg{sup -1} {<=} 1.0 as solubity of the solutes allowed, and at p = 0.35 MPa using a vibrating tube densimeter. We have also measured the heat capacities of these solutions at 278.15 {<=} T/K {<=} 393.15 and at the same m and p using a twin fixed-cell differential temperature-scanning calorimeter. We used the densities to calculate apparent molar volumes V {sub {phi}} and the heat capacities to calculate apparent molar heat capacities C {sub p,{phi}} for these solutions. We used our results and values from the literature for V {sub {phi}}(T, m) and C {sub p,{phi}}(T, m) for HCl(aq), NaOH(aq), and NaCl(aq) and the molar heat capacity change {delta}{sub r} C {sub p,m}(T, m) for ionization of water to calculate parameters for {delta}{sub r} C {sub p,m}(T, m) for the first two proton dissociations from each of the protonated aqueous cationic amino acids. We used Young's Rule and integrated these results iteratively to account for the effects of equilibrium speciation and chemical relaxation on V {sub {phi}}(T, m) and C {sub p,{phi}}(T, m). This procedure gave parameters for V {sub {phi}}(T, m) and C {sub p,{phi}}(T, m) for L-aspartinium and L-glutaminium chlorides and for monosodium L-aspartate and L-glutamate which modeled our observed results within experimental uncertainties. We report values for {delta}{sub r} C {sub p,m}, {delta}{sub r} H {sub m}, pQ {sub a}, {delta}{sub r} S {sub m}, and {delta}{sub r} V {sub m} for the first and second proton dissociations from protonated aqueous L-aspartic acid and L-glutamic acid as functions of T and m.

  4. MOLAR TOOTH SIGN - JOUBERT SYNDROME

    Directory of Open Access Journals (Sweden)

    Dušica Ranđelović

    2015-09-01

    Full Text Available The molar tooth sign is seen in very few conditions and is a very rare pediatric central nervous system congenital anomaly. Molar tooth sign is the result of cerebellar vermis hypoplasia, thick and maloriented superior cerebellar peduncles, and an abnormally deep interpeduncular fossa. In Joubert syndrome, this is seen in about 85% of patients. We present a case of a two-year old girl with flaccid paraparesis, regression of milestones and developmental delay. Magnetic resonance imaging (MRI showed the characteristic molar tooth sign with apposition of cerebellar hemispheres, batwing-shaped fourth ventricle, cerebellar vermis agenesis and deep interpeduncular fossa consistent with the diagnosis of Joubert syndrome.

  5. Excess Thermodynamic Properties and Ftir Spectroscopy of Aceton-Isopropanol Liquid Binary Mixture

    Directory of Open Access Journals (Sweden)

    Ali A. Jazie

    2018-01-01

    Full Text Available Experimental investigation was done using different instruments for the testing the properties of density, surface tension and viscosity in the case of pure and mixture system at the normal temperature of 25 oC and 1 atm. Excess volume was found to exhibit negative value at a mole fraction of 0.5. The deviation in the surface tension and viscosity were found of a positive value at the mole fraction value of 0.5. The experimental excess properties were correlated using the Redlich-Kister (RK equation and showed an accepted standard deviation. The intermolecular interaction between acetone and isopropanol was found of negligible effect and showed a weakness in the hydrogen bonding according to the FTIR spectra for the mixture of acetone and isopropanol which agreed with the positive values of excess molar volume. Moreover, the values of surface tension and viscosity deviations were found of negative values for all the mole fraction range studied.     

  6. A Semi-Empirical Excess Pressure Equation for CO{sub 2}-H{sub 2}O fluids at 400 C, 0--400 MPa

    Energy Technology Data Exchange (ETDEWEB)

    Blencoe, J.G.; Anovitz, L.M.; Singh, J.

    1999-09-12

    Highly accurate and precise density data for CO{sub 2}-H{sub 2}O mixtures at 400 C 10-400 MPa, were used to develop a modified, B-truncated virial equation for excess pressure (P{sup ex}). This function and empirical equations of state for H{sub 2}O and CO{sub 2} accurately represent the experimentally determined densities, and interpolate smoothly between data points. Integrating the P{sub ex} expression with respect to molar volume yields an equation for excess Helmholta free energy, which can be used to calculate other excess properties of interest. The P{sup ex} modeling method has important advantages over more conventional, alternative approaches.

  7. Molar Intrusion in Open-bite Adults Using Zygomatic Miniplates.

    Science.gov (United States)

    Marzouk, Eiman S; Abdallah, Essam Mohamed; El-Kenany, Walid A

    2015-01-01

    The aim of this study is to evaluate the skeletal, dental and soft tissue changes that arise after intrusion of the maxillary molars using zygomatic miniplates in adult skeletal anterior open bite patients. In addition to measuring the amount and rate of molar intrusion; with special emphasis on changes in the axial inclination of the intruded molars. The study group was composed of 13 anterior open bite patients (mean age 18 years, 8 months ± 2 years, 2 months) with posterior dentoalveolar excess. Mini-plates were placed in the zygomatic buttress bilaterally. The upper arch was segmentally leveled and a double Trans-Palatal Arch (TPA) was bonded. Closed NiTi coil spring was placed bilaterally between the book of the mini-plate just mesial and distal to the first molar buccal tube applying intrusive force of 450 gper side. Lateral and posteroanterior cephalograms were taken before intrusion (T1: post upper segmental leveling) and after intrusion (T2). Comparison between means before and after the intrusion was done using Wilcoxon Signed Ranks test (WSRT). Mandibular autorotation followed the molar intrusion, SNB and SN-Pog angles significantly increased while the ANB, MP-SN angle and N-S-Gn angle significantly decreased. The mean amount of accomplished molar intrusion was 3.1mm ± 0.74mm, with a rate of 0.36mm per month ± 0.08mm per month and a bite closure of 6.55mm ± 1.83mm. There was no significant buccal tip in the right and left molars upon intrusion. Conclusion: Miniplates zygomatic anchorage can be used effectively for skeletal open bite correction through posterior dento-alveolar intrusion. Intrusion of the posterior teeth with skeletal anchorage induced counterclockwise rotation of the mandible and, as a consequence, corrected the anteroposterior intermaxillary relationship with a dramatic improvement in the facial soft tissue convexity.

  8. Excessive Daytime Sleepiness

    Directory of Open Access Journals (Sweden)

    Yavuz Selvi

    2016-06-01

    Full Text Available Excessive daytime sleepiness is one of the most common sleep-related patient symptoms, with preva-lence in the community estimated to be as high as 18%. Patients with excessive daytime sleepiness may exhibit life threatening road and work accidents, social maladjustment, decreased academic and occupational performance and have poorer health than comparable adults. Thus, excessive daytime sleepiness is a serious condition that requires investigation, diagnosis and treatment primarily. As with most medical condition, evaluation of excessive daytime sleepiness begins a precise history and various objective and subjective tools have been also developed to assess excessive daytime sleepiness. The most common causes of excessive daytime sleepiness are insufficient sleep hygiene, chronic sleep deprivation, medical and psychiatric conditions and sleep disorders, such as obstructive sleep apnea, medications, and narcolepsy. Treatment option should address underlying contributors and promote sleep quantity by ensuring good sleep hygiene. [Psikiyatride Guncel Yaklasimlar - Current Approaches in Psychiatry 2016; 8(2: 114-132

  9. Prevention of excess gain.

    Science.gov (United States)

    Stevens, J; Truesdale, K P; Wang, C-H; Cai, J

    2009-11-01

    Obesity prevention trials are designed to promote healthy weight. The success of these trials is often assessed using one of three metrics--means, incidence or prevalence. In this study, we point out conceptual shortcomings of these metrics and introduce an alternative that we call 'excess gain'. A mathematical demonstration using simulated data shows a scenario in which the statistical power of excess gain compares favorably with that of incidence and prevalence. Prevention of excess gain communicates an easily understood public health message that is applicable to all individuals regardless of weight status.

  10. Excess wind power

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    2005-01-01

    analyses it is analysed how excess productions are better utilised; through conversion into hydrogen of through expansion of export connections thereby enabling sales. The results demonstrate that particularly hydrogen production is unviable under current costs but transmission expansion could...

  11. Supernumerary molars. A review of 53 cases

    OpenAIRE

    Menardía Pejoan, V.; Berini Aytés, Leonardo; Gay Escoda, Cosme

    2000-01-01

    Supernumerary molars are not uncommon and may be found nearly anywhere in the dental alveolar arches. A series of 36 patients that presented with 53 supernumerary molars are reviewed. They occurred more frequently in the maxilla (86.8%), had little or no clinical significance, tended to be impacted, and were not associated with the impactation of the third molar. Four cases of maxillary fifth molars are described

  12. Impacted lower third molars and distal caries in the mandibular second molar. Is prophylactic removal of lower third molars justified?

    Science.gov (United States)

    Marques, José; Montserrat-Bosch, Marta; Vilchez-Pérez, Miguel-Angel; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

    2017-01-01

    Background The objective of this study was to evaluate the association between the presence of mandibular third molars and the occurrence of carious lesions in the distal aspect of the mandibular second molar. Material and Methods A retrospective cohort study comprising 327 lower third molars extracted in the Oral Surgery and Implantology Master’s Degree program of the School of Dentistry of the University of Barcelona (Barcelona, Spain) was carried out. A descriptive and bivariate analysis was made. The diagnosis of caries in the second molar and the position of the mandibular third molar were evaluated through panoramic radiographies. Results The sample included 203 patients, 94 males (46.3%) and 109 females (53.7%), with a mean age of 26,8 years and 327 lower third molars. The prevalence of second molar distal caries was 25.4% (95% CI= 20.6% to 30.2%). This pathology was significantly more frequent when the third molar was in a horizontal position (27.7%), when the contact point was at (45,8%) or below (47.0%) the cementoenamel junction (CEJ), and when the distal CEJ of the mandibular second molar and the mesial CEJ of the third molar was 7 to 12 mm apart. Conclusions Horizontal lower third molars with contact points at or below the CEJ are more likely to produce distal caries in the mandibular second molars. Due to the high prevalence of this pathology (20.6% to 30.2%), a prophylactic removal of lower third molars with the above-mentioned features might be advisable. Key words:Second molar, caries, third molar, prophylactic removal. PMID:28638558

  13. Third molar complications requiring hospitalization.

    Science.gov (United States)

    Kunkel, Martin; Morbach, Thomas; Kleis, Wilfried; Wagner, Wilfried

    2006-09-01

    The aim of this study was to describe demographic and clinical patterns of subjects hospitalized with complications associated with third molars (M3). The investigation was designed as a prospective cohort study composed of subjects admitted to hospital for management of M3-associated complications. The predictor variable was "clinical status of the M3" defined as (A) prophylactic M3 removal, (B) nonelective M3 removal, or (C) M3 present at the time of admission. Outcome variables were infection parameters, treatment costs, length of hospital stay, and days of disability. Postoperative complications (A and B) were compared to complications based on pericoronitis (C). Complications due to prophylactic removal (A) were compared to those arising from pericoronitis or from the removal of symptomatic teeth (B and C). From January 2003 to December 2004, 45 deep space infections, 6 mandibular fractures, 2 lingual nerve injuries, 1 parapharyngeal tooth luxation, and 1 osteomyelitis were noticed. Fifteen complications resulted from prophylactic surgery (A), 25 from nonelective removal (B), and 15 from pericoronitis (C). Direct treatment costs were 147,000 euro (A: 42,000 euro; B: 74,000 euro; C: 31,000 euro). In 10 of the 15 patients of group C, deep space involvement resulted immediately from the first episode of pericoronitis. Neither clinical markers of infection nor economic parameters showed significant differences between the groups. Within the catchment area of our institution, the majority of third molar-related hospitalizations resulted from diseased third molars or their removal.

  14. Excessive crying in infants

    Directory of Open Access Journals (Sweden)

    Ricardo Halpern

    2016-06-01

    Full Text Available ABSTRACT Objective: Review the literature on excessive crying in young infants, also known as infantile colic, and its effects on family dynamics, its pathophysiology, and new treatment interventions. Data source: The literature review was carried out in the Medline, PsycINFO, LILACS, SciELO, and Cochrane Library databases, using the terms “excessive crying,” and “infantile colic,” as well technical books and technical reports on child development, selecting the most relevant articles on the subject, with emphasis on recent literature published in the last five years. Summary of the findings: Excessive crying is a common symptom in the first 3 months of life and leads to approximately 20% of pediatric consultations. Different prevalence rates of excessive crying have been reported, ranging from 14% to approximately 30% in infants up to 3 months of age. There is evidence linking excessive crying early in life with adaptive problems in the preschool period, as well as with early weaning, maternal anxiety and depression, attention deficit hyperactivity disorder, and other behavioral problems. Several pathophysiological mechanisms can explain these symptoms, such as circadian rhythm alterations, central nervous system immaturity, and alterations in the intestinal microbiota. Several treatment alternatives have been described, including behavioral measures, manipulation techniques, use of medication, and acupuncture, with controversial results and effectiveness. Conclusion: Excessive crying in the early months is a prevalent symptom; the pediatrician's attention is necessary to understand and adequately manage the problem and offer support to exhausted parents. The prescription of drugs of questionable action and with potential side effects is not a recommended treatment, except in extreme situations. The effectiveness of dietary treatments and use of probiotics still require confirmation. There is incomplete evidence regarding alternative

  15. CANINE ECTOPIC TREATMENT WITH FIRST MOLAR EXTRACTION

    Directory of Open Access Journals (Sweden)

    Angelica Margo

    2015-06-01

    Full Text Available Decision to extract or not and the type of tooth must be analyzed carefully in orthodontic treatment. Preferable tooth to be extracted was the tooth with large caries or restoration. Usually the type of tooth to be extracted was second molar (if the third molar appears, incisor, first molar, and combination of several teeth. Orthodontic treatment with molar extraction is more difficult to treat and the result is usually compromise. There are several considerations in extracting first molar such as tooth with large caries or restoration, hypoplasia, periapical disease, large discrepancy, high maxilla-mandibular plane angle, and cases with anterior open bite. Nowadays, orthodontic cases with molar extraction do not prolong the treatment time compared to premolar extraction case, but the anchorage system must be considered carefully. The present case was treated with extraction of first molar to solve anterior crowding with maximum anchorage at the upper jaw and using Nance Holding Appliance.

  16. Reducing Excessive Television Viewing.

    Science.gov (United States)

    Jason, Leonard A.; Rooney-Rebeck, Patty

    1984-01-01

    A youngster who excessively watched television was placed on a modified token economy: earned tokens were used to activate the television for set periods of time. Positive effects resulted in the child's school work, in the amount of time his family spent together, and in his mother's perception of family social support. (KH)

  17. HIV Excess Cancers JNCI

    Science.gov (United States)

    In 2010, an estimated 7,760 new cancers were diagnosed among the nearly 900,000 Americans known to be living with HIV infection. According to the first comprehensive study in the United States, approximately half of these cancers were in excess of what wo

  18. Using cone beam computed thomography in planning the extraction of impacted third molars

    Directory of Open Access Journals (Sweden)

    Vlahović Zoran

    2016-01-01

    Full Text Available The panoramic radiography is the most used diagnostic imaging method in planning impacted lower third molar extractions. However, often panoramic radiography does not provide enough information in treatment planning for performing safely surgical extraction of impacted third molars. CBCT (Cone beam computed tomography provides more precise information in diagnostic analysis especially for planning surgical procedures where complications can be expected due to close relationship between mandibular canal and lower impacted third molars. The aim of this study is comparative analysis of panoramic radiography and CBCT in evaluating the topographic relationship between mandibular canal and impacted third molars. The study included 50 patients with close relationship between mandibular canal and impacted third molars detected using panoramic radiography. After panoramic radiography analysis CBCT was performed in order to diagnose, plan and prevent complications during the surgical tooth extraction. CBCT examination considered comparative analysis with panoramic radiography, marking, volume rendering and assessment of mandibular canal in buccolingual direction. Out of total patients where suprimposition of mandibular canal and impacted third molar on panoramic radiography was detected, in 32 patients mandibular chanal was localised on lingual side. Mandibular canal was positioned at bucal side in 18 of 50 patients. Results of this research indicate that panoramic radiography can be useful in everyday practice for diagnosis, planning and preparing lower third molar extractions, but in cases where close relationship between mandibular canal and lower third molars is detected CBCT is recommended as more precise radiographic imaging method in order to prevent complications.

  19. Anaesthetic Challenges in Molar Pregnancy

    Directory of Open Access Journals (Sweden)

    Ghansham Biyani

    2013-06-01

    Full Text Available Gestational Trophoblastic Disease (GTD is a spectrum of tumours with a wide range of biologic behaviour and potential for metastases, which were often fatal in the past. However, with better understanding of patho-physiology in the last few years, most women can now be cured. A Hydatidiform Mole (or Molar Pregnancy is a benign Gestational Trophoblastic Disease that originates from the placenta. Treatment consists of vacuum evacuation but rarely hysterectomy may be required. Anaesthetic management is often complicated by the associated derangements.

  20. Mandibular molar root morphology in Neanderthals and Late Pleistocene and recent Homo sapiens.

    Science.gov (United States)

    Kupczik, Kornelius; Hublin, Jean-Jacques

    2010-11-01

    Neanderthals have a distinctive suite of dental features, including large anterior crown and root dimensions and molars with enlarged pulp cavities. Yet, there is little known about variation in molar root morphology in Neanderthals and other recent and fossil members of Homo. Here, we provide the first comprehensive metric analysis of permanent mandibular molar root morphology in Middle and Late Pleistocene Homo neanderthalensis, and Late Pleistocene (Aterian) and recent Homo sapiens. We specifically address the question of whether root form can be used to distinguish between these groups and assess whether any variation in root form can be related to differences in tooth function. We apply a microtomographic imaging approach to visualise and quantify the external and internal dental morphologies of both isolated molars and molars embedded in the mandible (n=127). Univariate and multivariate analyses reveal both similarities (root length and pulp volume) and differences (occurrence of pyramidal roots and dental tissue volume proportion) in molar root morphology among penecontemporaneous Neanderthals and Aterian H. sapiens. In contrast, the molars of recent H. sapiens are markedly smaller than both Pleistocene H. sapiens and Neanderthals, but share with the former the dentine volume reduction and a smaller root-to-crown volume compared with Neanderthals. Furthermore, we found the first molar to have the largest average root surface area in recent H. sapiens and Neanderthals, although in the latter the difference between M(1) and M(2) is small. In contrast, Aterian H. sapiens root surface areas peak at M(2). Since root surface area is linked to masticatory function, this suggests a distinct occlusal loading regime in Neanderthals compared with both recent and Pleistocene H. sapiens. Copyright © 2010 Elsevier Ltd. All rights reserved.

  1. (Vapour + liquid) equilibrium in (N,N-dimethylacetamide + methanol + water) at the temperature 313.15 K[N,N-Dimethylacetamide; Water; Methanol; Amides; Binary mixtures; Ternary mixtures; (Vapour+liquid) equilibrium; Excess Gibbs free energy; Correlation

    Energy Technology Data Exchange (ETDEWEB)

    Zielkiewicz, Jan. E-mail: jaz@altis.chem.pg.gda.pl

    2003-12-01

    Total vapour pressures, measured at the temperature 313.15 K, are reported for the ternary mixture (N,N-dimethylacetamide + methanol + water), and for binary constituents (N,N-dimethylacetamide + methanol) and (N,N-dimethylacetamide + water). The present results are compared with previously obtained data for binary mixtures (amide + water) and (amide + methanol), where amide=N-methylformamide, N,N-dimethylformamide, N-methyl-acetamide, 2-pyrrolidinone and N-methylpyrrolidinone. Moreover, it was found that excess Gibbs free energy of mixing for binary mixtures varies roughly linearly with the molar volume of amide.

  2. The otherness of sexuality: excess.

    Science.gov (United States)

    Stein, Ruth

    2008-03-01

    The present essay, the second of a series of three, aims at developing an experience-near account of sexuality by rehabilitating the idea of excess and its place in sexual experience. It is suggested that various types of excess, such as excess of excitation (Freud), the excess of the other (Laplanche), excess beyond symbolization and the excess of the forbidden object of desire (Leviticus; Lacan) work synergistically to constitute the compelling power of sexuality. In addition to these notions, further notions of excess touch on its transformative potential. Such notions address excess that shatters psychic structures and that is actively sought so as to enable new ones to evolve (Bersani). Work is quoted that regards excess as a way of dealing with our lonely, discontinuous being by using the "excessive" cosmic energy circulating through us to achieve continuity against death (Bataille). Two contemporary analytic thinkers are engaged who deal with the object-relational and intersubjective vicissitudes of excess.

  3. Excessive crying in infants

    Directory of Open Access Journals (Sweden)

    Ricardo Halpern

    2016-05-01

    Conclusion: Excessive crying in the early months is a prevalent symptom; the pediatrician's attention is necessary to understand and adequately manage the problem and offer support to exhausted parents. The prescription of drugs of questionable action and with potential side effects is not a recommended treatment, except in extreme situations. The effectiveness of dietary treatments and use of probiotics still require confirmation. There is incomplete evidence regarding alternative treatments such as manipulation techniques, acupuncture, and use of the herbal supplements and behavioral interventions.

  4. The effects of excessive humidity.

    Science.gov (United States)

    Williams, R B

    1998-06-01

    Humidification devices and techniques can expose the airway mucosa to a wide range of gas temperatures and humidities, some of which are excessive and may cause injury. Humidified gas is a carrier of both water and energy. The volume of water in the gas stream depends on whether the water is in a molecular form (vapor), particulate form (aerosol), or bulk form (liquid). The energy content of gas stream is the sum of the sensible heat (temperature) of the air and any water droplets in it and the heat of vaporization (latent energy) of any water vapor present. Latent heat energy is much larger than sensible heat energy, so saturated air contains much more energy than dry air. Thus every breath contains a water volume and energy (thermal) challenge to the airway mucosa. When the challenge exceeds the homeostatic mechanisms airway dysfunction begins, starting at the cellular and secretion level and progressing to whole airway function. A large challenge will result in quick progression of dysfunction. Early dysfunction is generally reversible, however, so large challenges with short exposure times may not cause irreversible injury. The mechanisms of airway injury owing to excess water are not well studied. The observation of its effects lends itself to some general conclusions, however. Alterations in the ventilation-perfusion ratio, decrease in vital capacity and compilance, and atelectasis are suggestive of partial or full occlusion of small airways. Changes in surface tension and alveolar-arterial oxygen gradient are consistent with flooding of alveoli. There also may be osmotic challenges to mucosal cell function as evidenced by the different reaction rates with hyper- and hypotonic saline. The reaction to nonisotonic saline also may partly explain increases in specific airway resistance. Aerosolized water and instilled water may be hazardous because of their demonstrated potential for delivering excessive water to the airway. Their use for airway humidification or

  5. Pulpectomy procedures in primary molar teeth

    OpenAIRE

    Hany Mohamed Aly Ahmed

    2014-01-01

    Premature loss of primary molars can cause a number of undesirable consequences including loss of arch length, insufficient space for erupting premolars and mesial tipping of the permanent molars. Pulpectomy of primary molar teeth is considered as a reasonable treatment approach to ensure either normal shedding or a long-term survival in instances of retention. Despite being a more conservative treatment option than extraction, efficient pulpectomy of bizarre and tortuous root canals encased ...

  6. Mandibular lip bumper for molar torque control.

    Science.gov (United States)

    Celentano, Giuseppe; Longobardi, Annalisa; Cannavale, Rosangela; Perillo, Letizia

    2011-01-01

    Treatment effects of lip bumpers alone include flaring of the mandibular incisors, distalization and uprighting of the mandibular first molars, and buccal expansion of the canines, premolars, and molar. Lip forces are transmitted through this appliance onto the molars. Moreover the lip bumper is able to derotate, expand or constrict, upright and reinforce the anchorage whereas torque control is lacking. Aim of this paper is the presentation of a new type of lip bumper that allows the molar torque control. Copyright © 2011 Società Italiana di Ortodonzia SIDO. Published by Elsevier Srl. All rights reserved.

  7. Permanent molars: Delayed development and eruption

    Directory of Open Access Journals (Sweden)

    Arathi R

    2006-05-01

    Full Text Available Delayed development and eruption of all the permanent molars is a rare phenomenon, which can cause disturbance in the developing occlusion. The eruption of permanent first and second molars is very important for the coordination of facial growth and for providing sufficient occlusal support for undisturbed mastication. In the case described, the first permanent molars were delayed in their development and were seen erupting at the age of nine and a half years. Severe disparity between the left and the right side of the dentition with respect to the rate of development of molars were also present.

  8. Assessment of association between molar incisor hypomineralization and hypomineralized second primary molar

    National Research Council Canada - National Science Library

    Rakesh Mittal; Shweta Chandak; Manisha Chandwani; Prabhat Singh; Jitesh Pimpale

    2016-01-01

      Background: The term molar incisor hypomineralization (MIH) has been described as a clinical entity of systemic origin affecting the enamel of one or all first permanent molars and also the incisors...

  9. [Hyperthyroidism induced by molar pregnancy].

    Science.gov (United States)

    Laurent, V; Besson, L; Doussin, J F; Rondelet, B; Banssillon, V

    1993-01-01

    A case is reported of a Senegalese patient admitted for hydatiform mole. The serum human chorionic gonadotrophin concentration (hCG) was 900,000 UI.l-1. The patient was recognized to be clinically hyperthyroid with raised T4 and T3 values, but a very low TSH concentration. After two days of beta adrenergic blockade and carbimazole, a suction curettage was performed under general anaesthesia. Propranolol was again administered 6 hours after the surgery. Thyroid function returned to normal level two weeks after removal of the mole, suggesting that hCG was responsible for the thyrotoxicosis. Serum hCG concentrations closely paralleled those of free thyroxine, but the correlation was difficult to assess because of carbimazole. Clinical thyrotoxicosis is rare in molar pregnancy. The diagnosis being made in semi-urgent conditions, this raises the question of how to obtain rapid stabilization of the disease before surgery.

  10. Electrolytic conductivity and molar heat capacity of two aqueous solutions of ionic liquids at room-temperature: Measurements and correlations

    Energy Technology Data Exchange (ETDEWEB)

    Lin Peiyin [R and D Center for Membrane Technology and Department of Chemical Engineering, Chung Yuan Christian University, Chung Li 32023, Taiwan (China); Soriano, Allan N. [R and D Center for Membrane Technology and Department of Chemical Engineering, Chung Yuan Christian University, Chung Li 32023, Taiwan (China); School of Chemical Engineering and Chemistry, Mapua Institute of Technology, Manila 1002 (Philippines); Leron, Rhoda B. [R and D Center for Membrane Technology and Department of Chemical Engineering, Chung Yuan Christian University, Chung Li 32023, Taiwan (China); Li Menghui, E-mail: mhli@cycu.edu.t [R and D Center for Membrane Technology and Department of Chemical Engineering, Chung Yuan Christian University, Chung Li 32023, Taiwan (China)

    2010-08-15

    As part of our systematic study on physicochemical characterization of ionic liquids, in this work, we report new measurements of electrolytic conductivity and molar heat capacity for aqueous solutions of two 1-ethyl-3-methylimidazolium-based ionic liquids, namely: 1-ethyl-3-methylimidazolium dicyanamide and 1-ethyl-3-methylimidazolium 2-(2-methoxyethoxy) ethylsulfate, at normal atmospheric condition and for temperatures up to 353.2 K. The electrolytic conductivity and molar heat capacity were measured by a commercial conductivity meter and a differential scanning calorimeter (DSC), respectively. The estimated experimental uncertainties for the electrolytic conductivity and molar heat capacity measurements were {+-}1% and {+-}2%, respectively. The property data are reported as functions of temperature and composition. A modified empirical equation from another researcher was used to correlate the temperature and composition dependence of the our electrolytic conductivity results. An excess molar heat capacity expression derived using a Redlich-Kister type equation was used to represent the temperature and composition dependence of the measured molar heat capacity and calculated excess molar heat capacity of the solvent systems considered. The correlations applied represent the our measurements satisfactorily as shown by an acceptable overall average deviation of 6.4% and 0.1%, respectively, for electrolytic conductivity and molar heat capacity.

  11. Third molar agenesis and craniofacial morphology.

    Science.gov (United States)

    Sánchez, María José; Vicente, Ascensión; Bravo, Luis Alberto

    2009-05-01

    To test the null hypothesis that agenesis of wisdom teeth is not related with any particular craniofacial morphology. Ninety-seven patients (aged 13-19 years) were selected and divided into three groups: (1) bilateral agenesis of maxillary third molars, (2) bilateral agenesis of mandibular third molars, and (3) control group without agenesis. Presence or absence of third molars was determined using ortopantomographs. Cephalometric analysis was carried out from lateral teleradiographs, which included linear, angular, and proportional measurements. When data obtained were distributed normally it was analyzed by means of single-factor variance analysis and the Scheffé test (P classification in 58.8% of cases. The hypothesis is rejected. Agenesis of the maxillary third molars was related to a reduced mandibular plane angle. Patients with agenesis of the mandibular third molars showed a diminished lower third and a mandibular morphology characteristic of the brachyfacial pattern.

  12. Bilateral maxillary fourth and fifth molars: An unusual radiographic appearance

    Directory of Open Access Journals (Sweden)

    Mukesh Khemchand Asrani

    2016-01-01

    Full Text Available Distomolars are supernumerary teeth present distal to third molars. Although many cases of bilateral fourth molars are reported, very few cases having bilateral fifth molars are described in literature. Here, we present a case having bilateral impacted maxillary fourth and fifth molars with the fifth molar on the left side having an unusually small appearance.

  13. Topiramate Induced Excessive Sialorrhea

    Directory of Open Access Journals (Sweden)

    Ersel Dag

    2015-11-01

    Full Text Available It is well-known that drugs such as clozapine and lithium can cause sialorrhea. On the other hand, topiramate has not been reported to induce sialorrhea. We report a case of a patient aged 26 who was given antiepileptic and antipsychotic drugs due to severe mental retardation and intractable epilepsy and developed excessive sialorrhea complaint after the addition of topiramate for the control of seizures. His complaints continued for 1,5 years and ended after giving up topiramate. We presented this case since it was a rare sialorrhea case induced by topiramate. Clinicians should be aware of the possibility of sialorrhea development which causes serious hygiene and social problems when they want to give topiramate to the patients using multiple drugs.

  14. The influence of premature loss of temporary upper molars on permanent molars.

    Science.gov (United States)

    Cernei, E R; Maxim, Dana Cristiana; Zetu, Irina Nicoleta

    2015-01-01

    Premature loss of primary molars due to dental caries and their complications has been associated with space loss and eruptive difficulties, especially when the loss occurs early. The aim of our study was to determine the impact of premature loss of temporary upper molars upon the longitudinal axis of the first and second upper permanent molar. The study group included 64 patients 6-9 years old with premature loss of primary molars and a control group of 48 patients with intact temporary teeth. It was evaluated the angle between longitudinal axis of first and second upper permanent molars and occlusal plane. The sofware used is Easy Dent 4 Viewer®.The data were analyzed by using the Statistical Package for the Social Sciences (version 20.0; SPSS, Chicago, III). It was observed that premature loss of upper second deciduous molars modifies greater the vertical axis of the permanent molars than the premature loss of first upper primary molar. First upper primary molar loss cause an acceleration eruption of first premolar, which will produce a distal inclintion of the both permanent molars. The use of space maintainers after premature loss of the second upper temporary molar is a last solution in preventing tridimensional lesions in the dental arch and occlusion.

  15. [Correlation between the lower first permanent molar axis and the premature loss of temporary molars].

    Science.gov (United States)

    Petcu, Ana; Maxim, A; Haba, Danisia

    2009-01-01

    The aim of our study was to determine the impact of premature loss of temporary molars upon the longitudinal axis of the first permanent molar. The study sample was formed by 94 orthopanthomografies of child patients with premature loss of lower temporary molars (first or second) after clinical eruption of the first permanent molar. All panoramic radiographs have been realized with the same panoramic unit with 1.4% magnification coefficient and were analyzed using a standardized technique of tracing the images of teeth and bone on matte acetate paper. It was evaluated the angle between longitudinal axis of first permanent lower molar and occlusal plane. It was observed that premature loss of lower second deciduous molar modifies greater the vertical axis of first permanent molar (between 61 degrees and 79 degrees) then premature loss of first lower primary molar. This is perhaps because the loss of space in the case of premature exfoliation of first primary molar is due more to distal drift of canine then mesial drift of molars. The drift to mesial of first permanent molar is more accentuated proportional with the age at which appeared premature loss and so it is loss of leeway space.

  16. Maxillary second molar impaction in the adjacent ectopic third molar: Report of five rare cases

    Science.gov (United States)

    Souki, Bernardo Q.; Cheib, Paula L.; de Brito, Gabriela M.; Pinto, Larissa S. M. C.

    2015-01-01

    Maxillary second molar impaction in the adjacent ectopic third molar is a rare condition that practitioners might face in the field of pediatric dentistry and orthodontics. The early diagnosis and extraction of the adjacent ectopic third molar have been advocated, and prior research has reported a high rate of spontaneous eruption following third molar removal. However, some challenges in the daily practice are that the early diagnosis of this type of tooth impaction is difficult with conventional radiographic examination, and sometimes the early surgical removal of the maxillary third molar must be postponed because of the risks of damaging the second molar. The objective of this study is to report a case series of five young patients with maxillary second molar impaction and to discuss the difficulty of early diagnosis with the conventional radiographic examination, and unpredictability of self-correction. PMID:26321848

  17. Maxillary second molar impaction in the adjacent ectopic third molar: Report of five rare cases

    Directory of Open Access Journals (Sweden)

    Bernardo Q Souki

    2015-01-01

    Full Text Available Maxillary second molar impaction in the adjacent ectopic third molar is a rare condition that practitioners might face in the field of pediatric dentistry and orthodontics. The early diagnosis and extraction of the adjacent ectopic third molar have been advocated, and prior research has reported a high rate of spontaneous eruption following third molar removal. However, some challenges in the daily practice are that the early diagnosis of this type of tooth impaction is difficult with conventional radiographic examination, and sometimes the early surgical removal of the maxillary third molar must be postponed because of the risks of damaging the second molar. The objective of this study is to report a case series of five young patients with maxillary second molar impaction and to discuss the difficulty of early diagnosis with the conventional radiographic examination, and unpredictability of self-correction.

  18. How will mandibular third molar surgery affect mandibular second molar periodontal parameters?

    Science.gov (United States)

    Tabrizi, Reza; Arabion, Hamidreza; Gholami, Mehdi

    2013-07-01

    Several conflicting findings have been published in the previous literature regarding the effects of impacted third molar surgery on the periodontal parameters of the adjacent second molar; some authors have shown improvement of periodontal health distal to the adjacent second molar, whilst others have demonstrated loss of attachment level (AL) and reduction of alveolar bone height. The purpose of this study was to evaluate the changes in periodontal health parameters distal to the adjacent second molar following extraction of an impacted third molar. Out of 50 patients participated in the study, 42 patients completed the study. The mean age of the sample was 20.9 (range, 18-25) years. All teeth were mesioangular impacted mandibular third molars categorized at C1 class based on the Pell and Gregory classification. All surgeries were performed by one surgeon and the same surgeon recorded the pre-operative and post-operative measurements of probing depth (PD) and AL on the distobuccal aspect of the second molars. Data analysis were carried out with the SPSS software (version 19), using the paired-samples t-test and one sample t-test. Surgical extraction of impacted mandibular third molar resulted in a significant increase of PD on the distobuccal aspect of the second molars, whereas AL was decreased significantly after surgery (P molar after extraction of impacted third molar, our study showed a significant increase in PD at the distal aspect of the second molar. Further follow-up on clinical and radiological parameters are required for more profound understanding of the long-term effects of third molar extraction on the periodontal parameters of the adjacent second molar.

  19. Treating Intraradicular Pockets of molars

    Directory of Open Access Journals (Sweden)

    H. Lotfizade

    1987-10-01

    Full Text Available It appears that until bone graft has not achieved 100% success, intraradicular diseases remain controversial and therefore, different treatment plans are suggested for them. Treating intraradicular diseases depend on many factors: maxillary molars are more prone to bone loss and have worse prognosis. To assess prognosis more carefully these factors should be considered: 1 bone loss: its apical depth, local or generalized 2 bone condition: buccal, lingual, mesial and distal aspects 3 tooth mobility: grades 2 and 3 have not good prognosis. Crown root ratio is also important. 4 the angle of divergence of roots: the more the roots are divergent, the better the prognosis would be. 5adjacent teeth health 6tooth position in jaws 7 age and general health of the patients 8 oral hygiene In general, teeth with 2 roots can be treated more effectively than 3 root ones. Maxillary first premolars are exceptions that do not respond to the treatments positively. We should look forward to the future investigations and findings.

  20. Identificação das características definidoras do diagnóstico de enfermagem excesso de volume de líquidos Identificación de las caracteristicas definidoras del diagnóstico de enfermería excesso de volumen de liquidos Identification od defining characteristics of the nursing diagnosis fluid volume excess

    Directory of Open Access Journals (Sweden)

    Heloísa Cristina Quatrini Carvalho Passos Guimarães

    2000-04-01

    Full Text Available Este estudo foi realizado com o objetivo de identificar as características definidoras do diagnóstico de enfermagem Excesso de Volume de Líquidos, proposto pela NANDA. Os dados foram coletados num hospital especializado em cardiologia, com uma amostra de 29 pacientes, cuja seleção foi realizada por duas enfermeiras peritas no assunto. Concluiu-se que houve concordância das duas peritas na identificação de nove pacientes com o diagnóstico em estudo e 20 sem o diagnóstico. As características definidoras identificadas aparecem em percentagens diferentes nos pacientes estudados.Este estudio fue llevado a cabo con el objetivo de validar el diagnóstico de enfermería "Exceso de Volumen de Líquidos". Para esto se buscó verificar la existencia o no de concordancia entre enfermeras de un hospital especializado en cardiología en lo que respecta a la identificación de las características definitorias utilizadas para determinar dicho diagnóstico, tal como es propuesto por la Asociación Norteamericana de Diagnósticos de Enfermería. El estudio fue realizado con 29 pacientes evaluados, en un primer momento, por dos enfermeras especialistas. Los resultados mostraron que las dos enfermeras concordaron en la indicación de presencia del diagnóstico objeto de estudio, en 9 pacientes y de ausencia en 20. Las características definitorias que determinaban la presencia o ausencia del diagnóstico se presentaron en diferentes porcentajes en los pacientes estudiados.This study aimed at verifying the defining characteristics of the nursing diagnosis "Fluid Volume Excess" proposed by NANDA. Data collection was carried out within a specialized Cardiology health care setting where the 29 patients were selected by two expert nurses. The conclusion showed consonance of opinions between the two professionals in regard to the identification of nine patients with diagnosis and 20 without this type of diagnosis. The identified defining characteristics

  1. Fusión de un tercer molar mandibular con un cuarto molar supernumerario Fusion of mandibular third molar with supernumerary fourth molar

    Directory of Open Access Journals (Sweden)

    C. López Carriches

    2008-10-01

    Full Text Available La fusión dental es la unión de dos gérmenes dentales normalmente separados, mientras que la geminación se define como el intento de división de un único germen dental. La fusión y geminación de molares es poco frecuente en la dentición permanente. Describimos un caso clínico de un tercer molar inferior derecho fusionado a un cuarto molar supernumerario en un paciente varón de 36 años que ha presentado repetidos episodios de pericoronaritis. Tras el estudio radiológico se realiza la exodoncia del cordal semiincluido bajo anestesia local. Llevamos a cabo una revisión bibliográfica al respecto.Dental fusion is the union of two tooth buds that normally are separated, while gemination is defined as an attempt by a single tooth bud to divide. The fusion and gemination of molars is uncommon in permanent teeth. We report a clinical case of a right lower third molar fused to a supernumerary fourth molar in a 36-year-old male patient with repeated episodes of inflammation. After the radiologic study, the semi-impacted third molar was extracted under local anesthesia. The literature was reviewed.

  2. Rare occurrence of the left maxillary horizontal third molar impaction ...

    African Journals Online (AJOL)

    Rare occurrence of the left maxillary horizontal third molar impaction, the right maxillary third molar vertical impaction and the left mandibular third molar vertical impaction with inferior alveolar nerve proximity in a 30 year old female: a case report.

  3. Study of kissing molars in Turkish population sample | Yanik ...

    African Journals Online (AJOL)

    Study of kissing molars in Turkish population sample. ... refers to contacting occlusal surfaces of the impacted mandibular second and third molars. ... was to report the incidence of kissing molars (KMs), classification, incorporated pathologies, ...

  4. Episodic Excessive Blinking in Children.

    Science.gov (United States)

    Mali, Yasmin Poustchi; Simon, John W; Chaudhri, Imran; Zobal-Ratner, Jitka; Barry, Gerard P

    2016-01-01

    Many children present with excessive blinking. Categorization, associated conditions, and prognosis are controversial. All children with excessive blinking were reviewed, excluding those with known uveitis, glaucoma, or obvious eyelid abnormalities. Parents were telephoned for follow-up. No ocular pathology was identified in 31 of 34 children with excessive blinking (91%). Parents were able to report a specific cause of blinking in 7 (21%). In 24 of 34 (71%), parents reported complete resolution of excessive blinking. No new ophthalmologic diagnoses were uncovered on follow-up. Episodes of excessive blinking rarely indicate neurologic disorders and frequently resolve spontaneously. Copyright 2016, SLACK Incorporated.

  5. Molar pregnancy and thyroid storm - literature review

    Directory of Open Access Journals (Sweden)

    Filipescu G. A.

    2017-08-01

    Full Text Available Molar pregnancies results from a tainted fertilization process. Trophoblastic thyroidian hyper function is an unusual complication of a molar pregnancy. The degree of thyroid stimulation and the severity of clinical hyperthyroidism is directly proportional to HCG concentration. Human chorionic gonadotrophin is almost identical with TSH, luteinizing hormone (LH and follicle-stimulating hormone, this analogy in the structure will cause cross-reactivity with their receptors. Hyperthyroid status can vary from asymptomatic hyper function to thyroid storm. Dilation and curettage represents the treatment for hyperthyroidism in molar pregnancy. Awareness of this condition is important for diagnosis and treatment.

  6. Unilateral Molar Distalization: A Nonextraction Therapy

    Directory of Open Access Journals (Sweden)

    M. Bhanu Prasad

    2012-01-01

    Full Text Available In the recent years, nonextraction treatment approaches and noncompliance therapies have become more popular in the correction of space discrepancies. One of the conventional approaches for space gaining in the arches without patient compliance is done by using certain extra oral appliances or intraoral appliance. The greatest advantage of certain appliances like fixed functional and molar distalization appliances is that they minimize the dependence on patient cooperation. Molar distalization appliances like pendulum appliance which distalizes the molar rapidly without the need of head gear can be used in patients as a unilateral space gaining procedure due to buccal segment crowding.

  7. Mini-implant-supported Molar Distalization

    Directory of Open Access Journals (Sweden)

    Amit Goyal

    2012-01-01

    Full Text Available Temporary anchorage devices popularly called mini-implants or miniscrews are the latest addition to an orthodontist′s armamentarium. The following case report describes the treatment of a 16-year-old girl with a pleasant profile, moderate crowding and Angle′s Class II molar relationship. Maxillary molar distalization was planned and mini-implants were used to preserve the anterior anchorage. After 13 months of treatment, Class I molar and canine relation was achieved bilaterally and there was no anterior proclination. Thus, mini-implants provide a viable option to the clinician to carry out difficult tooth movements without any side effects.

  8. Treatment of ectopic first permanent molar teeth.

    LENUS (Irish Health Repository)

    Hennessy, Joe

    2012-11-01

    Ectopic eruption of the first permanent molar is a relatively common occurence in the developing dentition. A range of treatment options are available to the clinician provided that diagnosis is made early. Non-treatment can result in premature exfoliation of the second primary molar, space loss and impaction of the second premolar. This paper will describe the management of ectopic first permanent molars, using clinical examples to illustrate the available treatment options. CLINICAL RELEVANCE: This paper is relevant to every general dental practitioner who treats patients in mixed dentition.

  9. A conservative management of iatrogenically damaged distal root of the mandibular second molar

    Directory of Open Access Journals (Sweden)

    Rashmi Bansal

    2017-01-01

    Full Text Available Trauma to the adjacent hard and soft tissue is the most common iatrogenic injury during extraction of the mandibular third molar. As every functional component of the dental arch is of prime importance in contemporary dental practice, the major concern must be in conserving the tooth and its structure as much as possible. The present case discusses the application of this conservative approach for management of iatrogenically damaged distal root of the mandibular second molar during extraction of impacted third molar, in which excessive guttering of alveolar bone and fractured apical third of distal root of 37 was observed radiographically. A conservative and noninvasive approach was successfully achieved to restore the damaged root by the bioactive material. Sealing of the remaining root with mineral trioxide aggregate allowed regeneration of soft and hard tissue around it.

  10. Efficiency of molar distalization with the XBow appliance related to second molar eruption stage.

    Science.gov (United States)

    Flores-Mir, Carlos; McGrath, L M; Heo, G; Major, P W

    2013-12-01

    To quantitatively evaluate on lateral cephalograms horizontal, vertical, and angular changes in the position of the maxillary first molar based on the presence and absence of erupted maxillary second molars when it is distalized with the XBow appliance. In this retrospective study, a total of 102 consecutively treated cases were assessed. Lateral cephalograms were obtained at the start and after completion of active treatment with the XBow appliance. In one group of patients, distal movement of the maxillary first molars was performed before the eruption of maxillary second molars; in the other group of patients, both first and second maxillary molars were simultaneously moved distally. All cephalograms were superimposed on palatal plane using the method of best-fit. In order to compare the mean horizontal, vertical, and angular changes in molar position between the treatment groups and gender, a multivariate analysis of covariance (MANCOVA) was performed with the pre-treatment class II severity used as a covariate. Regression analysis was also performed to further explore any possible relationships between the predictor variables and the quantity and quality of distalization. A MANCOVA revealed that the eruption stage of the maxillary second molar did not have a significant effect on the change in position of the maxillary first molar after treatment with a XBow appliance. When distalizing maxillary first molars with a XBow appliance, there is no difference in the amount of distalization in patients with erupted and unerupted maxillary second molars.

  11. A Molar Pregnancy within the Fallopian Tube

    Directory of Open Access Journals (Sweden)

    Laura Allen

    2016-01-01

    Full Text Available Background. Discussion of the incidence of molar pregnancy and ectopic pregnancy. Role of salpingostomy and special considerations for postoperative care. Case. The patient is a 29-year-old G7P4 who presented with vaginal bleeding in the first trimester and was initially thought to have a spontaneous abortion. Ultrasound was performed due to ongoing symptoms and an adnexal mass was noted. She underwent uncomplicated salpingostomy and was later found to have a partial molar ectopic pregnancy. Conclusion. This case illustrates the rare occurrence of a molar ectopic pregnancy. There was no indication of molar pregnancy preoperatively and this case highlights the importance of submitting and reviewing pathological specimens.

  12. IMPLICATIONS OF PREMATURE LOSS OF PRIMARY MOLARS

    Directory of Open Access Journals (Sweden)

    Ana PETCU

    2016-06-01

    Full Text Available The pathology of premature loss of temporary molars is a complex issue with profound impact on dental and facial harmony, urging clinician`s interest for an optimal therapeutic approach. Identification of the predisposing factors, in full agreement with the anatomical particularities of the temporary teeth, corroborated with the incidence of premature loss of molars is a main condition for an optimal therapeutic management of these patients.

  13. Efficiency of a pendulum appliance for molar distalization related to second and third molar eruption stage.

    Science.gov (United States)

    Kinzinger, Gero S M; Fritz, Ulrike B; Sander, Franz-Günter; Diedrich, Peter R

    2004-01-01

    A modified pendulum appliance, including a distal screw and special preactivated pendulum springs (built-in straightening activation and toe-in bending), was used for bilateral maxillary molar distalization in 36 adolescent patients in various stages of the molar dentition. The patients were divided into 3 groups (PG 1-3) according to the stage of eruption of their second and third molars. In PG 1 (18 patients), eruption of the second molars had either not yet taken place or was not complete. In PG 2 (15 patients), the second molars had already developed as far as the occlusal plane, with the third molars at the budding stage. In PG 3 (3 patients), germectomy of the wisdom teeth had been carried out, and the first and second molars on both sides had completely erupted. Analysis of cephalograms to identify any changes in the sagittal plane showed that, in the direction of distalization, a tooth bud acts on the mesial neighboring tooth like a fulcrum, and that tipping of the first molars in patients in whom the second molar was still at the budding stage was thus greater. In patients whose second molars had erupted completely, the degree of tipping was greater again when a third molar bud was located in the direction of movement. After previously completed germectomy of the wisdom teeth, almost exclusively bodily distalization of both molars is possible, even without bands being applied to the second molars. However, if the first and second molars are distalized simultaneously with a pendulum appliance, the duration of therapy will be longer, greater forces will have to be applied, and more anchorage will be lost. Statistical analysis of the results of dental-angular measurements showed significant differences in the degree of molar tipping and reciprocal incisor protrusion. The degree of distal tipping of first molars was less in patients with erupted second molars (PG 2 and PG 3) than in those whose second molars were not yet erupted (PG 1). For instance, the

  14. Economic and health implications of routine CBCT examination before surgical removal of the mandibular third molar in the Danish population

    DEFF Research Database (Denmark)

    Petersen, L B; Rose Olsen, Kim; Matzen, L H

    2015-01-01

    OBJECTIVES: This epidemiological study aimed to analyse economical and societal consequences in Denmark if CBCT is used routinely as a diagnostic method before removal of the mandibular third molar. Furthermore, the aim was to calculate the excess cancer incidence from this practice. METHODS: 17 ...

  15. Estudios físico-químicos de miscelas de aceites vegetales XIV. Volumen molar, refracción molar y viscosidad de disoluciones de estearato de metilo en ciciohexano, hexano, tetracloroetileno o tricloroetileno

    Directory of Open Access Journals (Sweden)

    Muñoz Cueto, María J.

    1991-02-01

    Full Text Available In the miscelies studied, molar volume and molar refraction values show linear dependence with the molar fraction of methyl stearate. Viscosity values fit Hildebrand's modified equation, where the "Vo" parameter is a linear function of the molar fraction of methyl stearate. Regarding with this three physico-chemical properties, the mixtures studied behave like ideal mixtures of two organic liquids without ionization.

    En todas las miscelas estudiadas los valores del volumen molar y de la refracción molar presentan variaciones lineales en función de la fracción molar de estearato de metilo. Los valores de viscosidad de las miscelas estudiadas se ajustan a la ecuación de fluidez de Hildebrand modificada, siendo su parámetro "Vo" función lineal de la fracción molar de estearato de metilo. En relación con estas tres características, el comportamiento de las miscelas estudiadas no difiere significativamente del correspondiente a una mezcla "ideal" de dos líquidos orgánicos sin ionizar.

  16. Predicting pathology in impacted mandibular third molars

    Directory of Open Access Journals (Sweden)

    Aveek Mukherji

    2017-01-01

    Full Text Available Introduction: The rising incidence of the impacted mandibular third molars and their association with pathologies is now considered a public health problem. Aims and Objectives: The objective of this study was to assess the position of impacted mandibular third molars that are prone to developing pathologies and to determine the frequency and type of pathological conditions associated with these impacted teeth to facilitate planning for their prophylactic removal. Materials and Methods: Consecutive panoramic radiographs and clinical examination of 300 patients with impacted mandibular third molars were collected. They were segregated according to Pell and Gregory’s classification, Winter’s classification, and according to their state of eruption. These were correlated with associated pathologies based on clinical and radiological criteria. Statistical Analysis Used: Descriptive statistics included computation of percentages, mean, and standard deviations. The statistical test applied for the analysis was Pearson’s Chi-square test (χ2. For this test, confidence interval and P value were set at 93% and ≤0.03, respectively. Results: The pathology most commonly associated with impacted third molars was pericoronitis, which had the highest frequency of occurrence in partially erupted, distoangular, and IA positioned (as per Pell and Gregory classification impacted teeth. Impacted mandibular third molars, which were in IA position, placed mesially, and partially erupted, were prone to develop pathologies such as dental caries and periodontitis. Conclusion: The clinical and radiographical features of impacted third molar may be correlated to the development of their pathological complications. The partially impacted mandibular third molars with mesioangularly aligned in IA position have the highest potential to cause pathological complications.

  17. Measuring Excess Noise in SDL's

    Science.gov (United States)

    Katzberg, S. J.; Kowitz, H. R.; Rowland, C. W.; Shull, T. A.; Ruggles, S. L.; Matthews, L. F.

    1983-01-01

    New instrument gives quantitive information on "excess noise" in semiconductor-diode laser (SDL's). By proper selection of detector, instrument tests any SDL from visible wavelengths through thermal infrared. Lasers determine excess noise in SKL source by measuring photocurrent generated in photodetector exposed first to reference laser then to SKL under test.

  18. Ketac Molar Versus Dyract Class II restorations in primary molars: twelve month clinical results.

    Science.gov (United States)

    Marks, L A; van Amerongen, W E; Borgmeijer, P J; Groen, H J; Martens, L C

    2000-01-01

    The aim of the present clinical study was an in vivo evaluation of an improved conventional glass ionomer cement Ketac Molar (ESPE), compared to a polyacid modified composite resin, Dyract (Dentsply/De Trey), used in primary molars. Fifty-three Ketac Molar and fifty-two Dyract restorations were placed in box-only preparations in primary molars. The application time for the chemically cured Ketac Molar, was longer compared to the light-cured Dyract. In comparing the materials, no differences were found, comparing both materials regarding secondary caries, marginal adaptation, wear and fracture toughness. One case of recurrent caries adjacent to a Ketac Molar restoration and two cases in the Dyract group were reported. Two Ketac Molar restorations and one Dyract showed bulk fracture at the time of evaluation. At the twelve-month evaluation, no difference between the investigated materials was registered, which indicates that Ketac Molar can be used as a proximal restoration in the primary dentition. It should be emphasized, however, that one-year data should not be extrapolated to indicate the long-term success of restorations.

  19. Comparative evaluation of molar distalization therapy with erupted second molar: Segmented versus Quad Pendulum appliance.

    Science.gov (United States)

    Caprioglio, Alberto; Cozzani, Mauro; Fontana, Mattia

    2014-01-01

    There are controversial opinions about the effect of erupted second molars on distalization of the first molars. Most of the distalizing devices are anchored on the first molars, without including second molars; so, differences between sequentially distalize maxillary molars (second molar followed by the first molar) or distalize second and first molars together are not clear. The aim of the study was to compare sequential versus simultaneous molar distalization therapy with erupted second molar using two different modified Pendulum appliances followed by fixed appliances. The treatment sample consisted of 35 class II malocclusion subjects, divided in two groups: group 1 consisted of 24 patients (13 males and 11 females) with a mean pre-treatment age of 12.9 years, treated with the Segmented Pendulum (SP) and fixed appliances; group 2 consisted of 11 patients (6 males and 5 females) with a mean pre-treatment age of 13.2 years, treated with the Quad Pendulum (QP) and fixed appliances. Lateral cephalograms were obtained before treatment (T1), at the end of distalization (T2), and at the end of orthodontic fixed appliance therapy (T3). A Student t test was used to identify significant between-group differences between T1 to T2, T2 to T3, and T1 to T3. QP and SP were equally effective in distalizing maxillary molars (3.5 and 4 mm, respectively) between T1 and T2; however, the maxillary first molar showed less distal tipping (4.6° vs. 9.6°) and more extrusion (1.1 vs. 0.2 mm) in the QP group than in the SP group, as well as the vertical facial dimension, which increased more in the QP group (1.2°) than in the SP group (0.7°). At T3, the QP group maintained greater increase in lower anterior facial height and molar extrusion and decrease in overbite than the SP group. Quad Pendulum seems to have greater increase in vertical dimension and molar extrusion than the Segmented Pendulum.

  20. Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

    Directory of Open Access Journals (Sweden)

    S. Arab

    2011-09-01

    Full Text Available Objective: Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD which is a simple molar distalizing appliance.Materials and Methods: Sixteen patients (12 girls, four boys with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. Thescrews were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance.Results: Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH decreased 1.28±1.36 mm.Conclusion: BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance.

  1. Fusión de un tercer molar mandibular con un cuarto molar supernumerario Fusion of mandibular third molar with supernumerary fourth molar

    OpenAIRE

    C. López Carriches; I. Leco Berrocal; R. Baca Pérez-Bryan

    2008-01-01

    La fusión dental es la unión de dos gérmenes dentales normalmente separados, mientras que la geminación se define como el intento de división de un único germen dental. La fusión y geminación de molares es poco frecuente en la dentición permanente. Describimos un caso clínico de un tercer molar inferior derecho fusionado a un cuarto molar supernumerario en un paciente varón de 36 años que ha presentado repetidos episodios de pericoronaritis. Tras el estudio radiológico se realiza la exodoncia...

  2. Does Excessive Pronation Cause Pain?

    DEFF Research Database (Denmark)

    Olesen, Christian Gammelgaard; Nielsen, RG; Rathleff, M

    Excessive pronation could be an inborn abnormality or an acquired foot disorder caused by overuse, inadequate supported shoes or inadequate foot training. When the muscles and ligaments of the foot are insufficient it can cause an excessive pronation of the foot. The current treatment consist...... of antipronation shoes or insoles, which latest was studied by Kulce DG., et al (2007). So far there have been no randomized controlled studies showing methods that can measure the effect of treatments with insoles. Some of the excessive pronation patients recieve antipronation training often if the patient...

  3. Does Excessive Pronation Cause Pain?

    DEFF Research Database (Denmark)

    Mølgaard, Carsten Møller; Olesen Gammelgaard, Christian; Nielsen, R. G.

    2008-01-01

    Excessive pronation could be an inborn abnormality or an acquired foot disorder caused by overuse, inadequate supported shoes or inadequate foot training. When the muscles and ligaments of the foot are insufficient it can cause an excessive pronation of the foot. The current treatment consist of ...... pronation patients recieve antipronation training often if the patient is in pain but wanted to investigate if it was possible to measure a change in foot posture after af given treatment....

  4. Evaluación del distalador molar Belussi Evaluation of Belussi's molar distalizer

    Directory of Open Access Journals (Sweden)

    Samer Abdel Nour Khoury

    2008-12-01

    Full Text Available La distalización de los molares superiores en mesogresión es una alternativa de tratamiento muy utilizado en nuestros días. Se conocen muchos métodos de distalización molar, estos han evolucionado notablemente y siguen siendo eficaces en el tratamiento. El objetivo de esta investigación fue evaluar los cambios dentales producidos por el distalador molar Belussi. El aparato fue empleado en 11 pacientes con una edad promedio de 12 años, distoclusión de molares causada por mesogresión, y con tipo facial favorable. A cada uno se le confeccionaron modelos de estudio y se le realizaron fotografías, radiografías panorámicas y telerradiografías laterales de cráneo, antes y después del tratamiento, para analizar las variables objeto de estudio. El aparato se mantuvo en boca hasta lograr un sobretratamiento de la relación molar. Finalmente, se obtuvo una distalización molar de 4,45 mm acompañada de una inclinación de 5,55°, con una pérdida mínima de anclaje temporal.The distalization of the superior molars in mesial migration is a useful alternative treatment nowadays. Many methods of molar distalization are known. They have significantly evolved and they are still effective in the treatment. The objective of this investigation was to evaluate the dental changes produced by Belussi Molar Distalizer. The appliance was used in 11 patients with an average of 12 years-old, distoocclusion of molars caused by mesial migration and with a favorable facial type. Study models were made for each one of them and pictures, panoramic x-rays and lateral X-rays of the skull were taken, before and after the treatment, to analyze the variables object of study. The appliance was kept in the mouth until achieving an overtreatment of the molar relation. Finally, a molar distalization of 4.45 mm accompanied with an inclination of 5.55° was obtained, with a minimum loss of temporary anchorage.

  5. Molar Tissue in Spleen: A Case Report

    Directory of Open Access Journals (Sweden)

    Maral Mokhtari

    2016-04-01

    Full Text Available An invasive mole is a rare form of gestational trophoblastic disease in which the molar tissue invades into the deep myometrium, cervical stroma, blood vessels or extrauterine sites. This report is of an invasive mole of spleen that has originated from an ectopic pregnancy, which was primarily though to be a choriocarcinoma.

  6. Taurodontism in deciduous Molars - A Case Report.

    Science.gov (United States)

    Bhat, S S; Sargod, S; Mohammed, S V

    2004-01-01

    Taurodontism has a very low incidence in deciduous dentition and very few cases are reported in the literature, it stands a challenge when it requires pulp therapy. This case report presents a case of Taurodontism in deciduous molars of a five year old male child which required pulp therapy. A clinical and radiographic follow up of the patient is discussed.

  7. Molar extinction coefficients of some fatty acids

    DEFF Research Database (Denmark)

    Sandhu, G.K.; Singh, K.; Lark, B.S.

    2002-01-01

    ) and stearic acid (C18H36O2), has been measured at the photon energies 81, 356, 511, 662, 1173 and 1332 keV. Experimental values for the molar extinction coefficient, the effective atomic number and the electron density have been derived and compared with theoretical calculations. There is good agreement...

  8. ERUPTION DISTURBANCES OF PERMANENT MOLARS - A REVIEW

    NARCIS (Netherlands)

    RAGHOEBAR, GM; BOERING, G; VISSINK, A; STEGENGA, B

    Eruption disturbances of permanent molars may become clinically and radiographically manifest as impaction, primary retention or secondary retention. This may result in clinical problems such as malocclusion and loss of neighboring teeth due to caries and periodontal disease. Which of these

  9. Distalización de molares

    Directory of Open Access Journals (Sweden)

    Ana María García Jiménez

    2016-01-01

    Full Text Available La distoclusión es una anomalía que alcanza a más de la mitad de los pacientes ortodóncicos, entre sus causas se encuentra la mesogresión de molares superiores. Una opción terapéutica es la distalización molar, cuando se considera la corrección sin extracciones. Se presenta el caso de un paciente remitido desde la atención primaria de salud, con relación molar de distoclusión derecha, neutroclusion izquierda, resalte de seis milímetros y sobrepase corona completa. Previa confección de modelos de estudio e indicación de estudio radiográfico, se procedió a la corrección ortodóncica con la placa Cetlin, a la que se le realizaron algunas modificaciones. Se corrigió la distoclusión del primer molar permanente superior derecho hasta la neutroclusión; además del espacio requerido para el acomodamiento del canino superior derecho, se logró la corrección del sobrepase hasta un tercio de corona y se mejoró el resalte de seis a cuatro milímetros.

  10. Efficiency of Intraligamentary Anesthesia of Inferior Molars for Endodontic Treatment

    Directory of Open Access Journals (Sweden)

    Peycheva K.

    2014-12-01

    Full Text Available The periodontal ligament injection appears to be the most consistently reliable in achieving clinically adequate pulpal anaesthesia. Materials and Methods: 130 inferior molar teeth; technique: The tooth was first cleaned with chlorhexidine 0.2% solution. The penetration of the ligament is performed with special intraligamentary needle (30 G - 9, 17,21 mm “sliding” along the side of the tooth, 300º angle between the needle and the tooth, having taken the care of determining support points which will prevent the needle from twisting. The penetration must be deep enough to obtain the seal required for the injection, injection for each root in particular points; volume of solution per root is 0.2-0.4 ml. Results: In 125 cases the technique was absolutely efficient. In only 5 cases with pulpitis chronica ulcerosa there was need for additional intrapulpal anesthesia. Conclusions: The method could be used as a primary anesthetic method for endodontic treatment.

  11. Bodily distalization of molars with absolute anchorage.

    Science.gov (United States)

    Keles, Ahmet; Erverdi, Nejat; Sezen, Serdar

    2003-08-01

    Palatal implants have been used over the last two decades to eliminate headgear wear and to establish stationary anchorage. In this case report, the stability of a palatal implant for distalization of molars bodily and for anchorage maintenance was assessed. The implant was a stepped screw titanium (4.5 mm diameter x 8 mm length), and it was placed in the palatal region for orthodontic purposes. A surgical template containing a metal drill housing was prepared. Angulation of the drill housing was controlled according to the radiologic tracing of the maxilla transferred to a plaster cast section in the paramedian plane. The implant was placed using a noninvasive technique (incision, flap, and suture elimination) and left transmucosally to facilitate the surgical procedure and to reduce the number of operations. The paramedian region was selected (1) to avoid the connective tissues of the palatine suture and (2) because it is considered to be a suitable host site for implant placement. After three months of healing, the implant was osseointegrated and orthodontic treatment was initiated. For molar distalization, the Keles Slider appliance was modified and, instead of a Nance button, a palatal implant was used for anchorage. The results showed that the molars were distalized bodily at five months, and no anchorage loss was observed. At the end of the treatment, the smile was improved, and an ideal Class I molar and canine relationship, an ideal overbite, and an ideal overjet were all achieved. In conclusion, palatal implants can be used effectively for anchorage maintenance and in space-gaining procedures. Use of a three-dimensional surgical template eliminated implant placement errors, reduced chair time, minimized trauma to the tissues, and enhanced osseointegration. This method can be used effectively to achieve distalization of molars bodily without anchorage loss.

  12. Incidence of distal caries in mandibular second molars due to impacted third molars: Nonintervention strategy of asymptomatic third molars causes harm? A retrospective study.

    Science.gov (United States)

    Srivastava, Nikhil; Shetty, Akshay; Goswami, Rahul Dev; Apparaju, Vijay; Bagga, Vivek; Kale, Saurabh

    2017-01-01

    Removal of impacted third molars is the most common oral surgical procedure. Many investigators have questioned the necessity of removal in patients who are free of symptoms or associated pathologies. The aim of this retrospective study was to evaluate the incidence of caries on distal aspect of mandibular second molars in patients referred for corresponding third molar assessment and to identify its association with angular position and depth of the impacted mandibular third molars based on the classification of Pell and Gregory. Records of 150 patients with impacted third molar presenting to the Department of Oral and Maxillofacial Surgery, Sri Rajiv Gandhi College of Dental Sciences and Hospital, were assessed retrospectively. The radiographic angulation and depth of mandibular third molar impaction were determined and compared to determine the relationship with incidence of caries on the distal surface of the second molar. According to this study results, 37.5% cases show caries on the distal aspect of mandibular second molars. The incidence of caries with mesioangular impacted third molars was 55%. A majority of these mesioangular cases were Level B and Class I as per the Pell and Gregory classification. The prophylactic extraction of mandibular third molars is indicated if the angulation is between 30° and 70° and is justified by incidence of distal caries in the second molars.

  13. Study of root canal accessibility in human primary molars.

    Science.gov (United States)

    Aminabadi, Naser A; Farahani, Ramin M Z; Gajan, Esrafil B

    2008-03-01

    The aim of the present study was to provide a general scheme for pulpectomy of primary molars that may be useful for decision-making about negotiation of root canals and selection of appropriate instruments. A total of 160 vital primary molars in 85 patients (40 males, 45 females) aged 4-6 years were selected. After taking primary radiographs, local anesthesia was induced, and the teeth were isolated using a rubber dam. Canal accessibility index (CAI) and tooth accessibility index (TAI) were calculated according to initial file size. Mandibular first molars had either three canals (79.2%) or four canals (20.8%), and all second molars had four canals. Maxillary first molars had three canals and second molars had either three canals (70.9%) or four canals (29.1%). Lower accessibility of the mandibular first molar distobuccal root accounted for the lower accessibility of these teeth in comparison with mandibular second molars. While three-canal maxillary second molars were more accessible due to the lower accessibility of the distobuccal canal of the maxillary first molar, poor accessibility of the distal canal in four-canal second molars was responsible for the difficult accessibility of these teeth. In conclusion, it seems that the accessibility of a single canal in each tooth determines the difficulty of accessibility for any given tooth. Moreover, while primary second molars are more accessible than first molars, all of them are negotiable.

  14. An innovative technique to distalize maxillary molar using microimplant supported rapid molar distalizer

    Directory of Open Access Journals (Sweden)

    Meenu Goel

    2013-01-01

    Full Text Available Introduction: In recent years, enhancements in implants have made their use possible as a mode of absolute anchorage in orthodontic patients. In this paper, the authors have introduced an innovative technique to unilaterally distalize the upper left 1 st molar to obtain an ideal Class I molar relationship from a Class II existing molar relationship with an indigenous designed distalizer. Clinical Innovation: For effective unilateral diatalization of molar, a novel cantilever sliding jig assembly was utilized with coil spring supported by a buccally placed single micro implant. The results showed 3 mm of bodily distalization with 1 mm of intrusion and 2° of distal tipping of upper left 1 st molar in 1.5 months. Discussion: This appliance is relatively easy to insert, well-tolerated, and requires minimal patient cooperation compared to other present techniques of molar distalization. Moreover, it is particularly useful in cases that are Class II on one side and Class I on the other, with a minor midline discrepancy and nominal overjet. Patient acceptance level was reported to be within patients physiological and comfort limits.

  15. Mandibular molar crown-topography, a biological predisposing ...

    African Journals Online (AJOL)

    Mandibular molar crown-topography, a biological predisposing factor to development of caries – a post-mortem analysis of 2500 extracted lower permanent molars at the dental centre, University of Benin teaching hospital.

  16. [The extraction of the lower third molars: germectomy or late avulsion?].

    Science.gov (United States)

    Chiapasco, M; Crescentini, M; Romanoni, G

    1994-05-01

    Lower third molars show the highest incidence of impaction and have been held responsible for pathologies such as pericoronitis, periodontitis, second molars tooth-crown resorption, pain, cysts or odontogenic tumors, primary or secondary crowding of the dentition. Early removal of these teeth to prevent the overmentioned problems is widely acknowledged, as many studies demonstrated a direct correlation between age and incidence of complications. These studies mostly refer to adult patients, while studies about germectomies are few. Because recent contributions showed that the risk of development of these pathologies in presence of impacted third molars is quite low while a certain morbidity associated to this procedure may be expected, a very careful risk to benefit ratio must be considered. The purpose of this study was therefore to compare the incidence of complications and side effects in three age groups, in order to obtain some informations about the choice of the best moment for operation. The patients, 462 females and 406 males, were divided, according to age, in the following three groups: group A included patients from 9 to 16 years; group B included patients from 17 to 24 years; group C included patients over 24 years. All patients were treated under local anesthesia; surgical procedure and instruments were standardized. In group A, formed by 500 germectomies, the incidence of complications was 2.6% (10 instances of secondary infections, 2 instances of trismus, 1 instance of excessive postoperative bleeding). Group B included 570 procedures and the incidence of complications was 2.8% (3 instances of alveolar osteitis, 7 instances of secondary infections, 2 instances of excessive postoperative bleeding, 2 instances od second molar lesions, 1 instance of inferior alveolar nerve paresthesia, 1 instance of trismus). Group C included 430 procedures and the incidence of complications was 7.4% (2 instances of second molar lesions, 9 instances of alveolar

  17. Study of Kissing Molars in Turkish Population Sample

    African Journals Online (AJOL)

    2017-06-28

    Jun 28, 2017 ... Mandibular third molars are the most common unerupted teeth; retention of the mandibular second molar is much less common.[1] Simultaneous retention of both teeth is quite rare. “Kissing molars” (KMs) are an interesting finding in permanent mandibular molar teeth. KMs or “rosette formation” was first ...

  18. Ruptured tubal molar pregnancy | Yakasai | Nigerian Journal of ...

    African Journals Online (AJOL)

    Molar pregnancies in most instances develop within the uterine cavity, but may occur at any site. Ectopic molar pregnancy is a rare event. The objective of this study was to present a case of ruptured tubal molar gestation, discuss its clinical features and ways to improve diagnostic accuracy. A 35.year.old woman presented ...

  19. Molar tooth sign - looking beyond the obvious | Mahomed | SA ...

    African Journals Online (AJOL)

    The molar tooth sign was initially identified in Joubert syndrome, named after Marie Joubert who first described it in 1968 as a rare autosomal recessive disorder characterised by the neuroradiological hallmark of the molar tooth sign caused by cerebellar vermian hypoplasia. Subsequently, it emerged that the molar tooth ...

  20. Molar-incisor-hypomineralisation: a literature review.

    Science.gov (United States)

    Willmott, N S; Bryan, R A E; Duggal, M S

    2008-12-01

    Molar-Incisor-Hypomineralisation (MIH) is a qualitative defect of 1-4 first permanent molars with or without the maxillary and mandibular permanent incisors. It seems to have been recognised first in the 1970s and prevalence varies between 2.8% and 25%, dependent upon the study. The dental literature was searched using a number of key terms entered into MEDLINE, the reference list of each paper as located was examined for further papers that had been missed in the initial search. The review of the literature showed that teeth that are affected indicate a systemic cause at around the time of birth; investigators have put forward a number of possible causes; asthma, pneumonia, upper respiratory tract infections, otitis media, antibiotics, dioxins in mother's milk, tonsillitis and tonsillectomy and exanthamatous fevers of childhood. However, at the present time the aetiology remains unclear. Treatment of the affected permanent first molars can include restorations using adhesive intra-coronal restorations to extra-coronal restorations (e.g. preformed metal crowns). There is little evidence to support one option over another. In severe cases extraction at the optimum time may be the best option; allowing the permanent second molars to come forwards. There is little improvement in affected anterior teeth with microabrasion and direct or indirect composite resin restorations may be appropriate in some children. Ultrastructural and biochemical make up of MIH affected teeth seem to have been investigated less than other areas. It is important that children with MIH are diagnosed as early as possible and managed appropriately; this will involve multidisciplinary input.

  1. Ceramic onlay for endodontically treated mandibular molar

    OpenAIRE

    Roopadevi Garlapati; Bhuvan Shome Venigalla; Shekhar Kamishetty; Jayaprakash Thumu

    2014-01-01

    Restoration of endodontically treated teeth is important for the success of endodontic treatment. In full coverage restorations, maximum amount of tooth structure is compromised, so as to conserve the amount of tooth structure partial coverage restorations, can be preferred. This case report is on fabrication of a conservative tooth colored restoration for an endodontically treated posterior tooth. A 22-year-old male patient presented with pain in the mandibular left first molar. After endodo...

  2. Excessive masturbation after epilepsy surgery.

    Science.gov (United States)

    Ozmen, Mine; Erdogan, Ayten; Duvenci, Sirin; Ozyurt, Emin; Ozkara, Cigdem

    2004-02-01

    Sexual behavior changes as well as depression, anxiety, and organic mood/personality disorders have been reported in temporal lobe epilepsy (TLE) patients before and after epilepsy surgery. The authors describe a 14-year-old girl with symptoms of excessive masturbation in inappropriate places, social withdrawal, irritability, aggressive behavior, and crying spells after selective amygdalohippocampectomy for medically intractable TLE with hippocampal sclerosis. Since the family members felt extremely embarrassed, they were upset and angry with the patient which, in turn, increased her depressive symptoms. Both her excessive masturbation behavior and depressive symptoms remitted within 2 months of psychoeducative intervention and treatment with citalopram 20mg/day. Excessive masturbation is proposed to be related to the psychosocial changes due to seizure-free status after surgery as well as other possible mechanisms such as Kluver-Bucy syndrome features and neurophysiologic changes associated with the cessation of epileptic discharges. This case demonstrates that psychiatric problems and sexual changes encountered after epilepsy surgery are possibly multifactorial and in adolescence hypersexuality may be manifested as excessive masturbation behavior.

  3. Propylene Glycol Poisoning From Excess Whiskey Ingestion

    Directory of Open Access Journals (Sweden)

    Courtney A. Cunningham MD

    2015-09-01

    Full Text Available In this report, we describe a case of high anion gap metabolic acidosis with a significant osmolal gap attributed to the ingestion of liquor containing propylene glycol. Recently, several reports have characterized severe lactic acidosis occurring in the setting of iatrogenic unintentional overdosing of medications that use propylene glycol as a diluent, including lorazepam and diazepam. To date, no studies have explored potential effects of excess propylene glycol in the setting of alcohol intoxication. Our patient endorsed drinking large volumes of cinnamon flavored whiskey, which was likely Fireball Cinnamon Whisky. To our knowledge, this is the first case of propylene glycol toxicity from an intentional ingestion of liquor containing propylene glycol.

  4. Crying - excessive (0-6 months)

    Science.gov (United States)

    ... provider will check the infant's growth and development. Antibiotics may be prescribed if the baby has a bacterial infection. Alternative Names Infants - excessive crying; Well child - excessive crying ...

  5. Pattern of mandibular third molar impaction and its association to caries in mandibular second molar: A clinical variant

    Directory of Open Access Journals (Sweden)

    V K Prajapati

    2017-01-01

    Conclusion: According to this study, pattern of mandibular third molar impaction is in association to caries in mandibular second molar. More future studies are needed. In addition, the results of the present study can be used to screen and inform the patients about the possibility of caries in relation to third molar mandibular impaction.

  6. Influence of unilateral maxillary first molar extraction treatment on second and third molar inclination in Class II subdivision patients

    NARCIS (Netherlands)

    Livas, Christos; Pandis, Nikolaos; Booij, Johan Willem; Halazonetis, Demetrios J.; Katsaros, Christos; Ren, Yijin

    Objective: To assess the maxillary second molar (M2) and third molar (M3) inclination following orthodontic treatment of Class II subdivision malocclusion with unilateral maxillary first molar (M1) extraction. Materials and Methods: Panoramic radiographs of 21 Class II subdivision adolescents (eight

  7. Excess fluid volume: clinical validation in patients with decompensated heart failure Volumen de líquidos excesivo: validación clínica del diagnóstico en pacientes con insuficiencia cardíaca descompensada Volume de líquidos excessivo: validação clínica em pacientes com insuficiência cardíaca descompensada

    Directory of Open Access Journals (Sweden)

    Quenia Camille Soares Martins

    2011-06-01

    Full Text Available This cross-sectional study aimed to clinically validate the defining characteristics of the Nursing Diagnosis Excess Fluid Volume in patients with decompensated heart failure. The validation model used follows the model of Fehring. The subjects were 32 patients at a university hospital in Rio Grande do Sul. The average age was 60.5 ± 14.3 years old. The defining characteristics with higher reliability index (R: R ≥ 0.80 were: dyspnea, orthopnea, edema, positive hepatojugular reflex, paroxysmal nocturnal dyspnea, pulmonary congestion and elevated central venous pressure, and minor or secondary, R> 0.50 to 0.79: weight gain, hepatomegaly, jugular vein distention, crackles, oliguria, decreased hematocrit and hemoglobin. This study indicates that the defining characteristics with R> 0.50 and 1 were validated for the diagnosis Excess Fluid Volume.Estudio transversal que tuvo como objetivo validar clínicamente las características definidoras del Diagnóstico de Enfermería Volumen de Líquidos Excesivo en pacientes con insuficiencia cardíaca descompensada. Para la validación se utilizó el modelo de Fehring. Participaron 32 pacientes de un hospital universitario en Rio Grande del Sur. El promedio de edad fue de 60,5±14,3 años. Las características definidoras mayores que tuvieron tasa de fiabilidad (R: R ≥ 0,80 fueron: disnea, orto-disnea, edema, reflujo hepatoyugular positivo, disnea paroxística nocturna, congestión pulmonar y presión venosa central elevada; y las menores o secundarias con R > 0,50 a 0,79, fueron: aumento de peso, hepatomegalia, distención de la vena yugular, crepitaciones, oliguria, hematocrito y hemoglobina disminuidos. Se demostró en este estudio que las características definidoras con R > 0,50 y 1 fueron validadas para el diagnóstico Volumen de Líquidos Excesivo en la muestra en estudio.Estudo transversal que teve como objetivo validar clinicamente as características definidoras do diagnóstico de enfermagem

  8. Molar tubal ectopic pregnancy: Report of two cases.

    Science.gov (United States)

    Mbarki, Chaouki; Jerbi, Emna; Hsayaoui, Najeh; Zouari, Fatma; Ben Brahim, Ehsen; Oueslati, Hedhili

    2015-06-01

    Ectopic molar pregnancy is a rare occurrence and consequently not often considered as a diagnostic possibility. We report two cases of molar hydatidiform tubal pregnancy. Diagnosis of ectopic pregnancy was confirmed on clinical biological and sonographic investigations. Diagnosis of molar pregnancy was done on histopathology. The clinical course was favorable for both patients. Although rare, molar changes can occur at any site of an ectopic pregnancy. Clinical diagnosis of a molar pregnancy is difficult but histopathology is the gold standard for diagnosis. © 2014 The Authors. Journal of Obstetrics and Gynaecology Research © 2014 Japan Society of Obstetrics and Gynecology.

  9. One year Survival Rate of Ketac Molar versus Vitro Molar for Occlusoproximal ART Restorations: a RCT.

    Science.gov (United States)

    Anna Luisa de Brito, Pacheco; Isabel Cristina, Olegário; Clarissa Calil, Bonifácio; Ana Flávia Bissoto, Calvo; José Carlos Pettorossi, Imparato; Daniela Prócida, Raggio

    2017-11-06

    Good survival rates for single-surface Atraumatic Restorative Treatment (ART) restorations have been reported, while multi-surface ART restorations have not shown similar results. The aim of this study was to evaluate the survival rate of occluso-proximal ART restorations using two different filling materials: Ketac Molar EasyMix (3M ESPE) and Vitro Molar (DFL). A total of 117 primary molars with occluso-proximal caries lesions were selected in 4 to 8 years old children in Barueri city, Brazil. Only one tooth was selected per child. The subjetcs were randomly allocated in two groups according to the filling material. All treatments were performed following the ART premises and all restorations were evaluated after 2, 6 and 12 months. Restoration survival was evaluated using Kaplan-Meier survival analysis and Log-rank test, while Cox regression analysis was used for testing association with clinical factors (α = 5%). There was no difference in survival rate between the materials tested, (HR = 1.60, CI = 0.98-2.62, p = 0.058). The overall survival rate of restorations was 42.74% and the survival rate per group was Ketac Molar = 50,8% and Vitro Molar G2 = 34.5%). Cox regression test showed no association between the analyzed clinical variables and the success of the restorations. After 12 months evaluation, no difference in the survival rate of ART occluso-proximal restorations was found between tested materials.

  10. One year Survival Rate of Ketac Molar versus Vitro Molar for Occlusoproximal ART Restorations: a RCT

    Directory of Open Access Journals (Sweden)

    PACHECO Anna Luisa de Brito

    2017-11-01

    Full Text Available Abstract Good survival rates for single-surface Atraumatic Restorative Treatment (ART restorations have been reported, while multi-surface ART restorations have not shown similar results. The aim of this study was to evaluate the survival rate of occluso-proximal ART restorations using two different filling materials: Ketac Molar EasyMix (3M ESPE and Vitro Molar (DFL. A total of 117 primary molars with occluso-proximal caries lesions were selected in 4 to 8 years old children in Barueri city, Brazil. Only one tooth was selected per child. The subjetcs were randomly allocated in two groups according to the filling material. All treatments were performed following the ART premises and all restorations were evaluated after 2, 6 and 12 months. Restoration survival was evaluated using Kaplan-Meier survival analysis and Log-rank test, while Cox regression analysis was used for testing association with clinical factors (α = 5%. There was no difference in survival rate between the materials tested, (HR = 1.60, CI = 0.98–2.62, p = 0.058. The overall survival rate of restorations was 42.74% and the survival rate per group was Ketac Molar = 50,8% and Vitro Molar G2 = 34.5%. Cox regression test showed no association between the analyzed clinical variables and the success of the restorations. After 12 months evaluation, no difference in the survival rate of ART occluso-proximal restorations was found between tested materials.

  11. Radiologic study of mandibular third molar of Korean youths

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Hyung Kyu [Dept. of Oral Radiology, College of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    1982-11-15

    The author has made a study on the classification of the mandibular 3rd molars of Korean youths through dental radiography by means of Pell and Gregory's classification and on the prevalence of the dental caries of distal surface of the mandibular 2nd molar adjacent to the mandibular 3rd molars turned anteriorly. The results are as follow; 1. It was found that the largest case number was class I (272 cases, 52.9%) in the relation of the tooth to the ramus of the mandible and 2nd molar. 2. The mesio-angular position was the largest number (239 cases, 46.5%) in the relation of the long axis of the impacted mandibular 3rd molar to the long axis of the 2nd molar. 3. The mesio-angular position of class I was the largest number (140 cases, 27.2%) in the relation of the tooth to the ramus of the mandible and 2nd molar and the long axis of the impacted mandibular 3rd moral to the long axis of the 2nd molar. 4. The average angle of the long axis of mandibular 3rd molar in mesioangular position or horizontal position to the occlusal plane was 143 W 5. Mandibular 3rd molar with lesion such as dental cries or pericoronitis was 73 cases (14.2). 6. The caries incidence rate of the distal surface of the 2nd molar was about 3.1%.

  12. UNILATERAL DISTALIZATION OF MAXILLARY MOLAR BY PENDULUM APPLIANCE

    Directory of Open Access Journals (Sweden)

    Safra Mauna

    2006-04-01

    Full Text Available Pendulum appliance is one of intraoral appliances to distalize molars for correction of class II molar relationship or space gaining in the maxillary arch. Its major advantages are: no need to depend on patient compliance; ease of fabrication; and better patient acceptance. In this case, 22 years old female patient with class II division 2 malocclusion was treated with pendulum appliance for unilateral distalization of the maxillary molar teeth. Pendulum can distalize second molar until 4 mm in 4 months and continues to distalize first molar in 3 months. Nevertheless, relapse 2 mm happens during anterior retraction. This case has shown that pendulum is an effective and reliable appliance for distalizing maxillary molars. However, molar distalization is at the expense of moderate anchorage loss during anterior retraction, which could possibly be reduced if the anchor unit is adequately reinforced.

  13. Bilateral lower second molar impaction in teenagers: An emergent problem?

    Directory of Open Access Journals (Sweden)

    Shinohara Elio

    2010-01-01

    Full Text Available The frequency of simultaneously impacted second and third molars in teenagers is increasing and becoming a common occurrence in adolescent oral surgery practice. The traditional treatment is the removal of the third molar by conventional access but repositioning of the surgical flap to the distal face of the first molar can predispose to complications such as pericoronitis and delayed healing of the attached gingiva. We present a case in which we use the germectomy approach to remove the impacted third molar for the eruption of the second molar through a vestibular incision. This incision offers excellent bone exposure and exit route for the third molar without disturbing the gingiva attached architecture on the distal face of the first molar providing good healing environment.

  14. Bilateral lower second molar impaction in teenagers: an emergent problem?

    Science.gov (United States)

    Shinohara, Elio H; Kaba, Shajadi Carlos Pardo; Pedron, Irineu Gregnanin; Imparato, Jose Carlos Petorossi

    2010-01-01

    The frequency of simultaneously impacted second and third molars in teenagers is increasing and becoming a common occurrence in adolescent oral surgery practice. The traditional treatment is the removal of the third molar by conventional access but repositioning of the surgical flap to the distal face of the first molar can predispose to complications such as pericoronitis and delayed healing of the attached gingiva. We present a case in which we use the germectomy approach to remove the impacted third molar for the eruption of the second molar through a vestibular incision. This incision offers excellent bone exposure and exit route for the third molar without disturbing the gingiva attached architecture on the distal face of the first molar providing good healing environment.

  15. Influência da temperatura, da massa molar e da distribuição de massa molar na tensão superficial de PS, PP e PE: experimento e teoria

    Directory of Open Access Journals (Sweden)

    Moreira José C.

    2003-01-01

    Full Text Available Neste trabalho a influência da temperatura, da massa molar (n e da distribuição de massa molar (MWD na tensão superficial de poliestireno (PS foi avaliada utilizando o método da gota pendente. A influência da temperatura na tensão superficial de polipropileno isotático (i-PP e de polietileno de baixa densidade (PELBD também foi estudada aqui. As teorias de Patterson-Rastogi e Dee-Sauer foram utilizadas em conjunção com a teoria de equação de estado de Flory, Orwoll, e Vrij (FOV para prever a tensão superficial (gama utilizando dados de pressão-volume-temperatura (PVT dos polímeros. Ambas teorias prevêem que a tensão superficial diminui linearmente com o aumento da temperatura e aumenta com a massa molar concordando com os resultados experimentais. Entretanto, ambas teorias subestimam a mudança de entropia de formação de superfície por unidade de área a volume constante para sistemas poliméricos de baixa massa molar e polidisperso e subestimam o efeito da distribuição de massa molar na tensão superficial

  16. Hydrocarbon molar water solubility predicts NMDA vs. GABAA receptor modulation.

    Science.gov (United States)

    Brosnan, Robert J; Pham, Trung L

    2014-11-19

    Many anesthetics modulate 3-transmembrane (such as NMDA) and 4-transmembrane (such as GABAA) receptors. Clinical and experimental anesthetics exhibiting receptor family specificity often have low water solubility. We hypothesized that the molar water solubility of a hydrocarbon could be used to predict receptor modulation in vitro. GABAA (α1β2γ2s) or NMDA (NR1/NR2A) receptors were expressed in oocytes and studied using standard two-electrode voltage clamp techniques. Hydrocarbons from 14 different organic functional groups were studied at saturated concentrations, and compounds within each group differed only by the carbon number at the ω-position or within a saturated ring. An effect on GABAA or NMDA receptors was defined as a 10% or greater reversible current change from baseline that was statistically different from zero. Hydrocarbon moieties potentiated GABAA and inhibited NMDA receptor currents with at least some members from each functional group modulating both receptor types. A water solubility cut-off for NMDA receptors occurred at 1.1 mM with a 95% CI = 0.45 to 2.8 mM. NMDA receptor cut-off effects were not well correlated with hydrocarbon chain length or molecular volume. No cut-off was observed for GABAA receptors within the solubility range of hydrocarbons studied. Hydrocarbon modulation of NMDA receptor function exhibits a molar water solubility cut-off. Differences between unrelated receptor cut-off values suggest that the number, affinity, or efficacy of protein-hydrocarbon interactions at these sites likely differ.

  17. Severe rhabdomyolysis after excessive bodybuilding.

    Science.gov (United States)

    Finsterer, J; Zuntner, G; Fuchs, M; Weinberger, A

    2007-12-01

    A 46-year-old male subject performed excessive physical exertion during 4-6 h in a studio for body builders during 5 days. He was not practicing sport prior to this training and denied the use of any aiding substances. Despite muscle aching already after 1 day, he continued the exercises. After the last day, he recognized tiredness and cessation of urine production. Two days after discontinuation of the training, a Herpes simplex infection occurred. Because of acute renal failure, he required hemodialysis. There were absent tendon reflexes and creatine kinase (CK) values up to 208 274 U/L (normal: <170 U/L). After 2 weeks, CK had almost normalized and, after 4 weeks, hemodialysis was discontinued. Excessive muscle training may result in severe, hemodialysis-dependent rhabdomyolysis. Triggering factors may be prior low fitness level, viral infection, or subclinical metabolic myopathy.

  18. MANAGEMENT OF MANDIBULAR THIRD MOLAR SURGERY TO PRESERVE PERIODONTAL HEALTH OF SECOND MOLAR

    Directory of Open Access Journals (Sweden)

    Elitsa G. Deliverska

    2017-06-01

    Full Text Available Background: Extraction of impacted third molar violates surrounding soft and bony tissues. Various surgical approaches and surgical technics have an important impact on the periodontal health of the adjacent second molar. Purpose: The aim of this review is to analyse the causes that can affect postoperative periodontal outcomes for the mandibular second molars (LM2 adjacent to the impacted/ semi impacted mandibular third molars (LM3. Material and Methods: Electronic searches were conducted through the MEDLINE (PubMed, Scopus, etc. databases to screen all relevant articles published from inception to April 2017. Results: Different flap techniques had no significant impact on the probing depth reduction or on the clinical attachment level of LM2. Szmyd and paramarginal flap designs may be the most effective in reducing the probing depth after third molar surgery, and the envelope flap may be the least effective. Use of bone substitutes and guided tissue regeneration therapy has been proposed, to eliminate or prevent these periodontal defects, but there is still no consensus on their predictability or clinical benefit. Higher costs and the risk of postoperative inflammatory complications should also be taken into proper account, as with any surgical procedure. “Orthodontic extraction” is indicated for that impacted M3 that present a high risk of postoperative periodontal defects at the distal aspect of adjacent M2. Conclusion: Risk factors associated with bone loss following lower third molar extraction includes age, the direction of the eruption, preoperative bone defects, and resorbtion of the LM2 root surface. Prevention of such periodontal defects continues to challenge clinicians.

  19. Excess enthalpies of mixing, effect of temperature and composition on the density, and viscosity and thermodynamic properties of binary systems of {ammonium-based ionic liquid + alkanediol}.

    Science.gov (United States)

    Domańska, Urszula; Papis, Paulina; Szydłowski, Jerzy; Królikowska, Marta; Królikowski, Marek

    2014-11-06

    In the present work the excess enthalpies of butyltrimethylammonium bis(trifluoromethyl-sulfonyl)imide, [N1114][NTf2], with 1,2-propanediol, or 1,2-butanediol, or 2,3-butanediol have been measured at T = 298.15 K. Additionally, the density, ρ, and dynamic viscosity, η, for binary solutions containing ionic liquids (ILs) and alkanedioles, {butyltrimethylammonium bis(trifluoromethyl-sulfonyl)imide, [N1114][NTf2], + 1,2-propanediol, 1,2-butanediol, 2,3-butanediol} and {(2-hydroxyethyl)trimethylammonium bis(trifluoro-methylsulfonyl)imide, [N1112OH][NTf2], + 1,2-propanediol, 1,3-propanediol, 1,5-pentanediol}, at wide temperature and composition ranges at ambient pressure have been investigated. From experimental values of the density, ρ, and dynamic viscosity, η, the excess molar volumes, V(E), and dynamic viscosity deviations, Δη, were calculated and correlated using the Redlich-Kister polynomial equation. The temperature dependence of density and viscosity for the tested binary systems was described by an empirical second-order polynomial and by the Vogel-Fucher-Tammann equation, respectively. The variation of density and viscosity as a function of composition has been described by the polynomial correlations. Comparison of the experimental results for the binary mixtures tested in this work allows us to determine the influence of alkanediol carbon chain length, the position of the hydroxyl group in the alcohol, and the influence of the structure of the cation of the ionic liquid on the presented properties.

  20. The role of microbial iron reduction in the formation of Proterozoic molar tooth structures

    Science.gov (United States)

    Hodgskiss, Malcolm S. W.; Kunzmann, Marcus; Poirier, André; Halverson, Galen P.

    2018-01-01

    Molar tooth structures are poorly understood early diagenetic, microspar-filled voids in clay-rich carbonate sediments. They are a common structure in sedimentary successions dating from 2600-720 Ma, but do not occur in rocks older or younger, with the exception of two isolated Ediacaran occurrences. Despite being locally volumetrically significant in carbonate rocks of this age, their formation and disappearance in the geological record remain enigmatic. Here we present iron isotope data, supported by carbon and oxygen isotopes, major and minor element concentrations, and total organic carbon and sulphur contents for 87 samples from units in ten different basins spanning ca. 1900-635 Ma. The iron isotope composition of molar tooth structures is almost always lighter (modal depletion of 2‰) than the carbonate or residue components in the host sediment. We interpret the isotopically light iron in molar tooth structures to have been produced by dissimilatory iron reduction utilising Fe-rich smectites and Fe-oxyhydroxides in the upper sediment column. The microbial conversion of smectite to illite results in a volume reduction of clay minerals (∼30%) while simultaneously increasing pore water alkalinity. When coupled with wave loading, this biogeochemical process is a viable mechanism to produce voids and subsequently precipitate carbonate minerals. The disappearance of molar tooth structures in the mid-Neoproterozoic is likely linked to a combination of a decrease in smectite abundance, a decline in the marine DIC reservoir, and an increase in the concentration of O2 in shallow seawater.

  1. The Role of Microbial Iron Reduction in the Formation of Proterozoic Molar Tooth Structures

    Science.gov (United States)

    Hodgskiss, M. S. W.; Kunzmann, M.; Halverson, G. P.; Poirier, A.

    2016-12-01

    Molar tooth structures are poorly understood early diagenetic, microspar-filled voids in clay-rich carbonate sediments. They are a common structure in sedimentary successions dating from 2600-720 Ma, but do not occur in rocks older or younger. Despite being volumetrically significant in carbonate rocks of this age, their formation and disappearance are poorly understood. Here, we present iron isotope data, supported by carbon and oxygen isotopes, major and minor element concentrations, and total organic carbon and pyrite contents for samples from ten regions spanning 1870-635 Ma. The iron isotopic composition of molar tooth structures is almost always lighter (modal depletion of 2‰) than the carbonate or siliciclastic components in the host sediment, whereas carbon isotopes are indistinguishable. We interpret the isotopically light iron in molar tooth structures to have been produced by microbial iron reduction utilising Fe-oxyhydroxides and smectites. The microbial conversion of smectite to illite results in a volume reduction of clay minerals ( 30%), while locally increasing pore water alkalinity. Therefore, this biogeochemical process is a viable mechanism to produce voids and subsequently precipitate carbonate minerals. The disappearance of molar tooth structures is likely linked to a combination of a decrease in smectite abundance, a decline in the marine DIC reservoir, and increase in the concentration of O2 in shallow seawater in the mid-Neoproterozoic.

  2. 10 CFR 904.9 - Excess capacity.

    Science.gov (United States)

    2010-01-01

    ... Marketing § 904.9 Excess capacity. (a) If the Uprating Program results in Excess Capacity, Western shall be entitled to such Excess Capacity to integrate the operation of the Boulder City Area Projects and other... 10 Energy 4 2010-01-01 2010-01-01 false Excess capacity. 904.9 Section 904.9 Energy DEPARTMENT OF...

  3. 12 CFR 925.23 - Excess stock.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Excess stock. 925.23 Section 925.23 Banks and... BANKS Stock Requirements § 925.23 Excess stock. (a) Sale of excess stock. Subject to the restriction in paragraph (b) of this section, a member may purchase excess stock as long as the purchase is approved by the...

  4. Stepwise excavation in a permanent molar

    DEFF Research Database (Denmark)

    Lima, Fernanda Ferruzzi; Pascotto, Renata Corrêa; Benetti, Ana Raquel

    2010-01-01

    The current study presents a 17-year clinical report of stepwise excavation and indirect pulp capping in a lower right first molar, with great dentin destruction and a lack of dentin support of the cusps. At the first appointment, indirect pulp capping with calcium hydroxide and a temporary filling...... with zinc oxide cement were performed to minimize the risk of pulp exposure during excavation. After 45 days, the remaining carious tissue was removed and a restoration with glass-ionomer lining (Vitrebond) and resin composite (P-50) was performed. Satisfactory morphology and function of the restoration...

  5. Molar Pregnancy Presents as Tubal Ectopic Pregnancy

    Directory of Open Access Journals (Sweden)

    Fatemeh Davari Tanha

    2011-01-01

    Full Text Available Hydatidiform moles are abnormal gestations characterized by the presence of hydropic changesaffecting some or all of the placental villi. Hydatidiform moles arise as a result of the fertilizationof an abnormal ovum. In this report, the patient was a 29 year old Asian woman who had inductionof ovulation with letrozol. Since the majority of molar gestations arise within the uterine cavitythus the occurrence of a hydatidiform mole within ectopic gestational tissue is rare. It is importantto differentiate a hydatidiform mole from a conventional ectopic pregnancy, particularly in infertilewomen who have a history of ovulation induction.

  6. Restorative management of severely ankylosed primary molars.

    Science.gov (United States)

    de Moura, Marcoeli Silva; Pontes, Alessandra Silva; Brito, Maria Hellen Sâmia Fortes; de Deus Moura, Lucia; de Deus Moura de Lima, Marina; de Melo Simplício, Alexandre Henrique

    2015-01-01

    Severe dentoalveolar ankylosis is an etiological factor for malocclusion. When infraocclusion occurs early, it progresses with time, leading to severe consequences in young children because of compensatory supra-eruption of the antagonist tooth and mesialization of adjacent teeth. Early diagnosis allows for interception of the problem and may prevent orthodontic treatment. The purpose of this manuscript is to report two cases of infraocclusion of primary mandibular second molars that were diagnosed early and were treated with composite resin crowns. The use of indirect composite restorations for ankylosed teeth is a good option for primary teeth with a moderate/ severe degree of ankylosis.

  7. Root growth during molar eruption in extant great apes.

    Science.gov (United States)

    Kelley, Jay; Dean, Christopher; Ross, Sasha

    2009-01-01

    While there is gradually accumulating knowledge about molar crown formation and the timing of molar eruption in extant great apes, very little is known about root formation during the eruption process. We measured mandibular first and second molar root lengths in extant great ape osteological specimens that died while either the first or second molars were in the process of erupting. For most specimens, teeth were removed so that root lengths could be measured directly. When this was not possible, roots were measured radiographically. We were particularly interested in the variation in the lengths of first molar roots near the point of gingival emergence, so specimens were divided into early, middle and late phases of eruption based on the number of cusps that showed protein staining, with one or two cusps stained equated with immediate post-gingival emergence. For first molars at this stage, Gorilla has the longest roots, followed by Pongo and Pan. Variation in first molar mesial root lengths at this stage in Gorilla and Pan, which comprise the largest samples, is relatively low and represents no more than a few months of growth in both taxa. Knowledge of root length at first molar emergence permits an assessment of the contribution of root growth toward differences between great apes and humans in the age at first molar emergence. Root growth makes up a greater percentage of the time between birth and first molar emergence in humans than it does in any of the great apes. Copyright (c) 2009 S. Karger AG, Basel.

  8. Taking advantage of an unerupted third molar: a case report.

    Science.gov (United States)

    Pereira, Igor Figueiredo; Santiago, Fernando Zander Mucci; Sette-Dias, Augusto Cesar; Noronha, Vladimir Reimar Augusto de Souza

    2017-01-01

    Treatments with dental surgery seek to displace tooth to the correct position within the dental arch. To report a clinical case that took advantage of an unerupted third molar. A male patient, 18 years of age, was referred by his dentist to evaluate the third molars. The clinical exam revealed no visible lower third molars. The computed tomography (CT) exam showed the presence of a supernumerary tooth in the region of the mandibular ramus, on the left side, and impaction of the third molar, which was causing root resorption on the second molar, thus making it impossible to remain in the buccal cavity. The preferred option, therefore, was to remove both second molar and the supernumerary tooth, in addition to attaching a device to the third molar during surgery for further traction. After 12 months, the third molar reached the proper position. When a mandibular second permanent molar shows an atypical root resorption, an impacted third molar can effectively substitute the tooth by using an appropriate orthodontic-surgical approach.

  9. Characterization of branched ultrahigh molar mass polymers by asymmetrical flow field-flow fractionation and size exclusion chromatography.

    Science.gov (United States)

    Otte, T; Pasch, H; Macko, T; Brüll, R; Stadler, F J; Kaschta, J; Becker, F; Buback, M

    2011-07-08

    The molar mass distribution (MMD) of synthetic polymers is frequently analyzed by size exclusion chromatography (SEC) coupled to multi angle light scattering (MALS) detection. For ultrahigh molar mass (UHM) or branched polymers this method is not sufficient, because shear degradation and abnormal elution effects falsify the calculated molar mass distribution and information on branching. High temperatures above 130 °C have to be applied for dissolution and separation of semi-crystalline materials like polyolefins which requires special hardware setups. Asymmetrical flow field-flow fractionation (AF4) offers the possibility to overcome some of the main problems of SEC due to the absence of an obstructing porous stationary phase. The SEC-separation mainly depends on the pore size distribution of the used column set. The analyte molecules can enter the pores of the stationary phase in dependence on their hydrodynamic volume. The archived separation is a result of the retention time of the analyte species inside SEC-column which depends on the accessibility of the pores, the residence time inside the pores and the diffusion ability of the analyte molecules. The elution order in SEC is typically from low to high hydrodynamic volume. On the contrary AF4 separates according to the diffusion coefficient of the analyte molecules as long as the chosen conditions support the normal FFF-separation mechanism. The separation takes place in an empty channel and is caused by a cross-flow field perpendicular to the solvent flow. The analyte molecules will arrange in different channel heights depending on the diffusion coefficients. The parabolic-shaped flow profile inside the channel leads to different elution velocities. The species with low hydrodynamic volume will elute first while the species with high hydrodynamic volume elute later. The AF4 can be performed at ambient or high temperature (AT-/HT-AF4). We have analyzed one low molar mass polyethylene sample and a number of

  10. Molar Incisor Hypomineralization, Prevalence, and Etiology

    Directory of Open Access Journals (Sweden)

    Sulaiman Mohammed Allazzam

    2014-01-01

    Full Text Available Aim. To evaluate the prevalence and possible etiological factors associated with molar incisor hypomineralization (MIH among a group of children in Jeddah, Saudi Arabia. Methods. A group of 8-12-year-old children were recruited (n=267  from the Pediatric Dental Clinics at the Faculty of Dentistry, King Abdulaziz University. Children had at least one first permanent molar (FPM, erupted or partially erupted. Demographic information, children’s medical history, and pregnancy-related data were obtained. The crowns of the FPM and permanent incisors were examined for demarcated opacities, posteruptive breakdown (PEB, atypical restorations, and extracted FPMs. Children were considered to have MIH if one or more FPM with or without involvement of incisors met the diagnostic criteria. Results. MIH showed a prevalence of 8.6%. Demarcated opacities were the most common form. Maxillary central incisors were more affected than mandibular (P=0.01. The condition was more prevalent in children with history of illnesses during the first four years of life including tonsillitis (P=0.001, adenoiditis (P=0.001, asthma (P=0.001, fever (P=0.014, and antibiotics intake (P=0.001. Conclusions. The prevalence of MIH is significantly associated with childhood illnesses during the first four years of life including asthma, adenoid infections, tonsillitis, fever, and antibiotics intake.

  11. Sealing Occlusal Dentin Caries in Permanent Molars

    DEFF Research Database (Denmark)

    Qvist, Vibeke; Borum, Mette Kit; Møller, Kirsten Dynes

    2017-01-01

    The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical and radiog......The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical...... longevity of sealings and restorations until retreatments, and 3) compare effectiveness of sealings and restorations to halt caries progression in sealed lesions and beneath restorations. Furthermore, we aimed to identify factors influencing longevity and the effectiveness of sealings and restorations.......001). The median survival time for sealings not replaced by restorations was 7.3 y (CI, 6.4 y to NA). Survival of sealings was increased in patients with low caries risk and/or excellent oral hygiene, second molars compared with first molars, and lesions not extending the middle one-third of the dentin. Survival...

  12. Periodontal changes following molar intrusion with miniscrews.

    Science.gov (United States)

    Bayani, Shahin; Heravi, Farzin; Radvar, Mehrdad; Anbiaee, Najmeh; Madani, Azam Sadat

    2015-01-01

    With the introduction of skeletal anchorage system, recently it is possible to successfully intrude molar teeth. On the other hand, there have been concerns about periodontal changes associated with intrusion and there are few studies on this topic, especially for posterior teeth. Ten female patients were enrolled in this study. Maxillary molar intrusion was achieved by inserting two miniscrews and a 17 × 25 titanium molybdenum alloy spring. Crestal height changes were evaluated at three intervals including: Baseline (T0), end of active treatment (T1) and 6 months after retention (T2). Other variables including probing depth, gingival recession, attachment level and bleeding on probing were evaluated by clinical measurements in the three above mentioned intervals. One-sample Kolmogrov-Smirnov test ascertained the normality of the data. For all patients, the changes in tooth position and crestal height were evaluated using one-sample t-test. (P intrusion, but also there were signs of periodontal improvement including attachment gain and shortening of clinical crown height.

  13. Diphoton excess through dark mediators

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chien-Yi [Department of Physics and Astronomy, University of Victoria,Victoria, BC V8P 5C2 (Canada); Perimeter Institute for Theoretical Physics,Waterloo, ON N2J 2W9 (Canada); Lefebvre, Michel [Department of Physics and Astronomy, University of Victoria,Victoria, BC V8P 5C2 (Canada); Pospelov, Maxim [Department of Physics and Astronomy, University of Victoria,Victoria, BC V8P 5C2 (Canada); Perimeter Institute for Theoretical Physics,Waterloo, ON N2J 2W9 (Canada); Zhong, Yi-Ming [C.N. Yang Institute for Theoretical Physics, Stony Brook University,Stony Brook, New York 11794 (United States)

    2016-07-12

    Preliminary ATLAS and CMS results from the first 13 TeV LHC run have encountered an intriguing excess of events in the diphoton channel around the invariant mass of 750 GeV. We investigate a possibility that the current excess is due to a heavy resonance decaying to light metastable states, which in turn give displaced decays to very highly collimated e{sup +}e{sup −} pairs. Such decays may pass the photon selection criteria, and successfully mimic the diphoton events, especially at low counts. We investigate two classes of such models, characterized by the following underlying production and decay chains: gg→S→A{sup ′}A{sup ′}→(e{sup +}e{sup −})(e{sup +}e{sup −}) and qq̄→Z{sup ′}→sa→(e{sup +}e{sup −})(e{sup +}e{sup −}), where at the first step a heavy scalar, S, or vector, Z{sup ′}, resonances are produced that decay to light metastable vectors, A{sup ′}, or (pseudo-)scalars, s and a. Setting the parameters of the models to explain the existing excess, and taking the ATLAS detector geometry into account, we marginalize over the properties of heavy resonances in order to derive the expected lifetimes and couplings of metastable light resonances. We observe that in the case of A{sup ′}, the suggested range of masses and mixing angles ϵ is within reach of several new-generation intensity frontier experiments.

  14. Extrações de molares na Ortodontia Molar extractions in orthodontics

    Directory of Open Access Journals (Sweden)

    Marco Antônio Schroeder

    2011-12-01

    Full Text Available O tratamento ortodôntico com extração de molares em pacientes adultos é tecnicamente mais complexo, devido a inúmeros fatores. Em geral, o espaço a ser fechado é maior do que o espaço dos pré-molares e, por isso, a ancoragem é crítica e o tempo de tratamento mais longo. É comum esses casos apresentarem algum grau de comprometimento periodontal por causa da idade dos pacientes e, portanto, necessitam de maior controle da mecânica ortodôntica para reduzir os efeitos colaterais do fechamento do espaço. Por isso, bons resultados de finalização são mais difíceis de ser alcançados. Sendo assim, este artigo tem como objetivo apresentar as razões para a indicação de extração de molares nos tratamentos ortodônticos, as contraindicações, as diferentes fases da mecânica ortodôntica, esclarecer os fatores envolvidos nesse tipo de planejamento e tratamento e apresentar casos clínicos tratados com extração de molares.Orthodontic treatment with extraction of molars in adult patients is technically more complex due to a number of factors. In general, the space to be closed is greater than premolar spaces rendering critical anchorage and longer treatment time. Often such cases exhibit some degree of periodontal involvement due to patient age. Hence, the need for greater control over orthodontic mechanics to reduce the side effects of space closure. Therefore, good finishing results can be more difficult to achieve. Thus, the purpose of this article is to determine the reasons for molar extraction indications, describe different stages of orthodontic mechanics, and explain the issues involved in this kind of planning and treatment. Additionally, it aims at describing some treatments with molar extractions.

  15. Clinical performance of esthetic posterior crowns in primary molars: a pilot study.

    Science.gov (United States)

    Fuks, A B; Ram, D; Eidelman, E

    1999-01-01

    The aim of this pilot study was to assess the clinical performance of esthetic crowns and to compare these to conventional stainless steel crowns (SSC). Twenty two crowns (11 conventional and 11 esthetic) were placed in mandibular primary molars obeying the following criteria: the tooth was not mobile; no fistulae were present; the tooth had at least one caries free or properly restored antagonist and had to be in contact with one adjacent tooth mesially, in the case of the primary second molars or distally in the case of the primary first molars. Crown preparation was done in a conventional manner, but reduction was more extensive for the thicker esthetic crowns, to allow for proper occlusion. The crowns were evaluated clinically and radiographically after 6 months and the following parameters were assessed: gingival health, marginal extension, crown adequacy, proper position or occlusion, proximal contact, chipping of the facing (for esthetic crowns) and cement removal. At the 6 month evaluation all esthetic crowns were intact, without chipping of the facing, and no excess of cement was observed in both groups. No difference was found for marginal extension, occlusion, proximal contact, crown adequacy, and bone resorption, but a significant difference was found for periodontal health between esthetic crowns and conventional SSC (P crowns assessed had several inconveniences, as they resulted in poor gingival health, are very expensive, and, although not measured, are bulky and without a natural appearance.

  16. Negative βhCG and Molar Pregnancy: The Hook Effect

    Directory of Open Access Journals (Sweden)

    Isabel Lobo Antunes

    2017-09-01

    Full Text Available Molar pregnancy, included in gestational trophoblastic disease, is a benign pathology with ability to metastasize, usually occurring with excessively high βhCG levels. Clinical scenario is usually a woman in extremes of reproductive age presenting with amenorrhoea, pain and vaginal blood loss; signs derived from high βhCG levels may be present (hyperthyroidism, hyperemesis. Diagnosis is based on a positive pregnancy test – usually a qualitative urinary test. The limitation of this test results from its inability to become positive in presence of markedly high levels of βhCG, saturating the antigens used – known as the ‘hook effect’. With the widespread use of gynaecological ultrasound cases of molar pregnancy have been diagnosed in timely fashion. We describe a case referred as a degenerating fibroid, with a negative urinary pregnancy test. Transvaginal ultrasound was highly suggestive of molar pregnancy, which was confirmed with a quantitative βhCG test, allowing for timely treatment. The importance of a high index of suspicion for this pathology is tremendous to avoid the devastating consequences of a delayed diagnosis.

  17. Formation of polyelectrolyte complexes with diethylaminoethyl dextran: charge ratio and molar mass effect.

    Science.gov (United States)

    Le Cerf, Didier; Pepin, Anne Sophie; Niang, Pape Momar; Cristea, Mariana; Karakasyan-Dia, Carole; Picton, Luc

    2014-11-26

    The formation of polyelectrolyte complexes (PECs) between carboxymethyl pullulan and DEAE Dextran, was investigated, in dilute solution, with emphasis on the effect of charge density (molar ratio or pH) and molar masses. Electrophoretic mobility measurements have evidenced that insoluble PECs (neutral electrophoretic mobility) occurs for charge ratio between 0.6 (excess of polycation) and 1 (stoichiometry usual value) according to the pH. This atypical result is explained by the inaccessibility of some permanent cationic charge when screened by pH dependant cationic ones (due to the Hoffman alkylation). Isothermal titration calorimetry (ITC) indicates an endothermic formation of PEC with a binding constant around 10(5) L mol(-1). Finally asymmetrical flow field flow fractionation coupled on line with static multi angle light scattering (AF4/MALS) evidences soluble PECs with very large average molar masses and size around 100 nm, in agreement with scrambled eggs multi-association between various polyelectrolyte chains. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Excess Early Mortality in Schizophrenia

    DEFF Research Database (Denmark)

    Laursen, Thomas Munk; Nordentoft, Merete; Mortensen, Preben Bo

    2014-01-01

    Schizophrenia is often referred to as one of the most severe mental disorders, primarily because of the very high mortality rates of those with the disorder. This article reviews the literature on excess early mortality in persons with schizophrenia and suggests reasons for the high mortality...... as well as possible ways to reduce it. Persons with schizophrenia have an exceptionally short life expectancy. High mortality is found in all age groups, resulting in a life expectancy of approximately 20 years below that of the general population. Evidence suggests that persons with schizophrenia may...

  19. Pattern of mandibular third molar impaction and its association to caries in mandibular second molar: A clinical variant.

    Science.gov (United States)

    Prajapati, V K; Mitra, Ruchi; Vinayak, K M

    2017-01-01

    Caries in second molar is common and prophylactic removal of the impacted teeth may be considered appropriate. Caries detection and restoration can be difficult and a restored second molar can undergo recurrent caries if the third molar is not removed prophylactically. In this study, the clinical findings related to impaction and its association with angular position and depth of impacted third molar were evaluated. A retrospective descriptive study was carried out among the patients visiting the outpatient, department of Dentistry, RIMS, Ranchi. The clinical examination, periapical radiographs and Pre-op OPG were taken. Teeth positions were analyzed by Pell and Gregory and Winter classification. The angulation and depth of mandibular third molar impaction and caries in the second molar with the eruption status of the mandibular third molar was determined. A total of 200 patients were included in the study between age group 17-45 years. Majority of the Patients reported to the hospital with complaints of decayed tooth (66%) and pain (59%). The most common third molar impaction was mesioangular followed by distoangular. A statistically highly significant difference (P = 0.001) was obtained with the presence of caries in second molar adjacent to mesioangular third molar in class I and level B. According to this study, pattern of mandibular third molar impaction is in association to caries in mandibular second molar. More future studies are needed. In addition, the results of the present study can be used to screen and inform the patients about the possibility of caries in relation to third molar mandibular impaction.

  20. Survival of sealants in molars affected by molar-incisor hypomineralization: 18-month follow-up.

    Science.gov (United States)

    Fragelli, Camila Maria Bullio; Souza, Juliana Feltrin de; Bussaneli, Diego Girotto; Jeremias, Fabiano; Santos-Pinto, Lourdes Dos; Cordeiro, Rita de Cássia Loiola

    2017-04-27

    The objective of this study was to evaluate the clinical survival of sealants applied in first permanent molars (FPMs) affected by molar-incisor hypomineralization (MIH), at 18 months of follow-up. Forty-one first permanent molars were selected from 21 children, 6-8 years of age. MIH was classified by one calibrated examiner (kappa = 0.80) according to EAPD criteria. The inclusion criteria were fully erupted FPMs with MIH or sound FPMs (without MIH) for which sealant treatment was indicated. The FPMs were assigned to two groups: CG (control group) and HG (MIH group). Both groups were treated with sealant (FluroShield). Clinical follow-up was performed from baseline to 18 months to assess anatomical form, marginal adaptation, retention and presence of caries, according to criteria set by the United States Public Health Service-Modified, and was conducted by a blinded examiner (kappa = 0.80). The actuarial method was used to evaluate the survival of the sealants. The survival rates for the groups were compared using Fisher's exact test (α = 5%). The cumulative survival rates were 81% at 1 month, 68.8% at 6 months, 68.8% at 12 months, and 62.6% at 18 months for CG, and 88% at 1 month, 84% at 6 months, 76% at 12 months, and 72% at 18 months for HG. No significant difference was found between the groups. The sealants in molars affected by MIH presented a survival rate similar to the sealants in the control, suggesting that sealants may be an adequate approach for preventing carious lesions in MIH-affected molars.

  1. Survival of sealants in molars affected by molar-incisor hypomineralization: 18-month follow-up

    Directory of Open Access Journals (Sweden)

    Camila Maria Bullio FRAGELLI

    2017-04-01

    Full Text Available Abstract The objective of this study was to evaluate the clinical survival of sealants applied in first permanent molars (FPMs affected by molar-incisor hypomineralization (MIH, at 18 months of follow-up. Forty-one first permanent molars were selected from 21 children, 6–8 years of age. MIH was classified by one calibrated examiner (kappa = 0.80 according to EAPD criteria. The inclusion criteria were fully erupted FPMs with MIH or sound FPMs (without MIH for which sealant treatment was indicated. The FPMs were assigned to two groups: CG (control group and HG (MIH group. Both groups were treated with sealant (FluroShield. Clinical follow-up was performed from baseline to 18 months to assess anatomical form, marginal adaptation, retention and presence of caries, according to criteria set by the United States Public Health Service-Modified, and was conducted by a blinded examiner (kappa = 0.80. The actuarial method was used to evaluate the survival of the sealants. The survival rates for the groups were compared using Fisher’s exact test (α = 5%. The cumulative survival rates were 81% at 1 month, 68.8% at 6 months, 68.8% at 12 months, and 62.6% at 18 months for CG, and 88% at 1 month, 84% at 6 months, 76% at 12 months, and 72% at 18 months for HG. No significant difference was found between the groups. The sealants in molars affected by MIH presented a survival rate similar to the sealants in the control, suggesting that sealants may be an adequate approach for preventing carious lesions in MIH-affected molars.

  2. Autotransplantation of Mandibular Third Molar: A Case Report

    Directory of Open Access Journals (Sweden)

    Pabbati Ravi kumar

    2012-01-01

    Full Text Available Autogenous transplantation is a feasible, fast, and economical option for the treatment of nonsalvageable teeth when a suitable donor tooth is available. This paper presents successful autotransplantation of a mature mandibular left third molar (38 without anatomical variances is used to replace a mandibular left second molar (37. The mandibular second molar was nonrestorable due to extensive root caries and resorption of distal root. After extraction of mandibular second and third molars, root canal therapy was done for the third molar extraorally, and the tooth was reimplanted into the extracted socket of second molar site. After one year, clinical and radiographic examination revealed satisfactory outcome with no signs or symptoms suggestive of pathology. In selected cases, autogenous tooth transplantation, even after complete root formation of the donor tooth, may be considered as a practical treatment alternative to conventional prosthetic rehabilitation or implant treatment.

  3. Prevalence of eruption status of third molars in Libyan students

    Directory of Open Access Journals (Sweden)

    Sujata Byahatti

    2012-01-01

    Full Text Available Background: The aim of the present study is to determine the number of third molars per person, angulation, level, amount of space for eruption of third molar between ramus of mandible and second molar and the eruption status of third molar in a group of Libyan students, with different impaction patterns and agenesis of third molars. Materials and Methods: In this descriptive retrospective study, a total of 200 students (100 male and 100 female students of bachelor of dental surgery, Faculty of Dentistry, Garyounis University, Benghazi, Libya were enrolled. Students who had complete complement of teeth within the age group 17-26 years were selected for this study, while those cases who had history of extraction of any of the teeth or who refused to give consent were excluded. Before starting the study, ethical concern from the ethical committee, IRB and informed consent from each student who underwent radiography were obtained. Results: The results showed that 5% of third molars were congenitally missing. Approximately 93.5% of the subjects had all four third molars, 1% had two third molars and 0.5% had one third molars with 2.5% having agenesis of all third molars. Third molar agenesis showed predilection for maxilla with higher proportion in females (3% than males (2.1%. Angular position was maximum with vertical position (5.83%, with least being horizontal impactions. Level of occlusal plane of third molar similar to that of adjacent tooth was seen in 44.74%, below the occlusal plane in 24.76%, totally impacted noted in 30%. Conclusion: The present study showed that 33% of the teeth were fully erupted and 66% were in various stages of eruption and 5% were congenitally missing in these students.

  4. Unusal canal configuration in maxillary and mandibular second molars

    Directory of Open Access Journals (Sweden)

    Ramachandran Ragunathan

    2016-01-01

    Full Text Available This clinical article describes three different case reports of maxillary and mandibular second molars with the unusual anatomy of single root with a single canal and their endodontic management. An unusual case of bilateralism is observed in the first two cases in the form of single-rooted second mandibular molars in both the quadrant of the same patient. The presence of maxillary second molar with single root and single canal in the third case is unusual.

  5. Bilateral lower second molar impaction in teenagers: An emergent problem

    OpenAIRE

    Shinohara Elio; Kaba Shajadi; Pedron Irineu; Imparato Jose

    2010-01-01

    The frequency of simultaneously impacted second and third molars in teenagers is increasing and becoming a common occurrence in adolescent oral surgery practice. The traditional treatment is the removal of the third molar by conventional access but repositioning of the surgical flap to the distal face of the first molar can predispose to complications such as pericoronitis and delayed healing of the attached gingiva. We present a case in which we use the germectomy approach to remove the impa...

  6. Intraoperative accidents associated with surgical removal of third molars

    OpenAIRE

    SEBASTIANI,Aline Monise; Todero,Sara Regina Barancelli; Gabardo,Giovana; Costa,Delson João da; Rebelatto,Nelson Luis Barbosa; Scariot, Rafaela

    2014-01-01

    Aim: To evaluate the prevalence of intraoperative accidents associated with extraction of third molars and identify possible risk factors. Methods: Prospective study with patients undergoing third molar surgery by residents of the Oral and Maxillofacial Surgery Service at the Federal University of Parana. Epidemiological data were collected from preoperative evaluation forms. During the surgical procedure were evaluated the radiographic position classifications of all third molars removed, us...

  7. Excessive hoarding in Parkinson's disease.

    Science.gov (United States)

    O'Sullivan, Sean S; Djamshidian, Atbin; Evans, Andrew H; Loane, Clare M; Lees, Andrew J; Lawrence, Andrew D

    2010-06-15

    Hoarding is seen in several psychiatric conditions, but has not been specifically assessed in Parkinson's disease (PD). This study investigates hoarding tendency amongst patients with PD, and its association with impulsive-compulsive spectrum behaviors (ICBs). We compare clinical features, measures of hoarding, impulse buying, self-control, obsessive-compulsive symptoms, depression, and anxiety in 39 patients with PD with ICBs (PD + ICB), 61 patients with PD without ICBs (PD - ICB), and 50 healthy controls. A much higher proportion of PD + ICB (27.8%) than PD - ICB (3.5%) were hoarders (P = 0.001). 6% of healthy controls were hoarders. Compulsive shoppers scored higher than other varieties of ICB on excessive acquisition measures. Hoarding correlated positively with impulsive buying, obsessive-compulsive symptoms, PD duration, and negatively with self-control measures. Using multivariate regression analyzes, the presence of ICBs and measures of impulsive buying were the only variables independently associated with hoarding in PD. The association of hoarding with other ICBs and low trait impulse control suggests that excessive hoarding is related to the spectrum of impulsive behaviors in PD. (c) 2010 Movement Disorder Society.

  8. Definições operacionais das características definidoras do diagnóstico de enfermagem Volume de Líquidos Excessivo Definiciones operacionales de las características definidoras del diagnóstico de enfermería Volumen de Líquídos Excesivo Operational definitions of the defining characterístics of the nursing diagnosis Fluid Volume Excess

    Directory of Open Access Journals (Sweden)

    Rita Narriman Silva de Oliveira Boery

    2005-06-01

    Full Text Available As definições operacionais são requisitos importantes no ensino da Semiologia e Semiotécnica nos Cursos de Graduação e Pós-Graduação em Enfermagem. Este estudo descritivo, acerca das definições operacionais elaboradas para as características definidoras do diagnóstico de enfermagem Volume de Líquidos Excessivo em portadores de cardiopatias foi realizado a partir de revisão da literatura, no período de 1985 a 2001. As definições operacionais foram analisadas criticamente por quatro enfermeiros especialistas em diferentes campos clínicos de atuação. Após os ajustes sugeridos por esses especialistas, os dados foram enviados a uma consultora técnica, para avaliação conclusiva.Las definiciones operacionales son subsidios importantes para la ensveñanza de Semiologia y Semiotécnica en los cursos de pre y pós grado. Este estudio descriptivo, aurea de las caracteristicas definidoras del diagnóstico de enfermaria Volumen de Liquidos Excesivo en pacientes cardíacos, que realizado a partir de revision de literatura, del período de 1985 a 2001. las definiciones operacionales elaboradas fueron analizadas por cuatro enfermeros especialistas que actuavan en diferentes campos clínicos. Despues de realizar las correcciones sugeridas por esas especialistas, los dados fueron enviados a uma consultora técnica para evoluación final.Operational definitions are important tools for teaching Semiology and Semiotechuiques both for undergraduate and graduate nursing students. This descriptive study on the operational definitions of the defining characteristics of nursing diagnosis Fluid Volume Excess in cardiac patients was based on literature review regarding the period from 1985 to 2001. The operational definitions were analyzed by four expert nurses from different clinical areas. After the suggested corrections were made, the data was submitted to a technical consultant for final evaluation.

  9. Second molar impaction associated with lip bumper therapy.

    Science.gov (United States)

    Jacob, Helder Baldi; LeMert, Shawn; Alexander, Richard G; Buschang, Peter H

    2014-01-01

    Although lip bumpers (LBs) provide significant clinical gain of mandibular arch perimeter in mixed-dentition patients, orthodontists are reluctant to use them due to the possibility of permanent second molar eruptive disturbances. The present study was conducted to assess second molar impaction associated with the use of LBs, and to investigate how they can be solved. Lateral and panoramic radiographs of 67 patients (34 females and 33 males) were assessed prior (T₁) and post-LB treatment (T₂). LB therapy lasted for approximately 1.8 ± 0.9 years. Concomitant rapid palatal expansion (RPE) was performed in the maxilla at LB treatment onset. Impaction of mandibular second molars was assessed by means of panoramic radiographs in relation to the position of first mandibular molars. Horizontal and vertical movements of first and second molars were assessed cephalometrically on lateral cephalometric radiographs based on mandibular superimpositions. Eight (11.9%) patients had impacted second molars at the end of LB therapy. Two patients required surgical correction, whereas five required spacers and one patient was self-corrected. Mandibular first molar tip and apex migrated forward 1.3 mm and 2.3 mm, respectively. Second molar tip showed no statistically significant horizontal movement. Although LB therapy increased the risk of second molar impaction, impactions were, in most instances, easily solved.

  10. Second molar impaction associated with lip bumper therapy

    Directory of Open Access Journals (Sweden)

    Helder Baldi Jacob

    2014-12-01

    Full Text Available INTRODUCTION: Although lip bumpers (LBs provide significant clinical gain of mandibular arch perimeter in mixed-dentition patients, orthodontists are reluctant to use them due to the possibility of permanent second molar eruptive disturbances.OBJECTIVE: The present study was conducted to assess second molar impaction associated with the use of LBs, and to investigate how they can be solved.MATERIAL AND METHODS: Lateral and panoramic radiographs of 67 patients (34 females and 33 males were assessed prior (T1 and post-LB treatment (T2. LB therapy lasted for approximately 1.8 ± 0.9 years. Concomitant rapid palatal expansion (RPE was performed in the maxilla at LB treatment onset. Impaction of mandibular second molars was assessed by means of panoramic radiographs in relation to the position of first mandibular molars. Horizontal and vertical movements of first and second molars were assessed cephalometrically on lateral cephalometric radiographs based on mandibular superimpositions.RESULTS: Eight (11.9% patients had impacted second molars at the end of LB therapy. Two patients required surgical correction, whereas five required spacers and one patient was self-corrected. Mandibular first molar tip and apex migrated forward 1.3 mm and 2.3 mm, respectively. Second molar tip showed no statistically significant horizontal movement.CONCLUSION: Although LB therapy increased the risk of second molar impaction, impactions were, in most instances, easily solved.

  11. Epidemiological Status of Third Molars in an Iranian Population

    Directory of Open Access Journals (Sweden)

    Mahnaz Sheikhi

    2016-07-01

    Full Text Available Background Impaction of third molars is a common phenomenon. The incidence of impacted third molars varies in different populations. Objectives The aim of this study is to assess radiographic status (root development degree, angulation, and eruption level of the third molar in Iranian population via panoramic radiographs. Patients and Methods 647 patients, ranging in age from 17 - 25, were selected from three regions of Iran. Based on their panoramic radiographs, their root development degree, angulation, and eruption levels were analyzed. Results The angulation of upper third molars were vertical (44.6%, distoangular (44.1%, mesioangular (10.7%, and horizontal (0.6%. For lower third molars, the angulation was mesioangular (44.5%, vertical (33.8%, distoangular (12.2%, and horizontal (9.5%. The eruption levels of maxillary third molars were C > A> B, and for mandibular third molars they were A > B> C. The order of root development prevalence of the maxillary and mandibular third molars was complete > 2/3 > 1/3. Conclusions The most common status of impaction of the third molars in the maxilla was vertical angulation, level C of eruption, and complete root formation. In the mandible it was mesioangular, level A of eruption, and complete root formation. Since the study sample consists of patients from the north, middle, and south of Iran, the sample can represent the whole population of Iran.

  12. Energy potential of the modified excess sludge

    Directory of Open Access Journals (Sweden)

    Zawieja Iwona

    2017-01-01

    Full Text Available On the basis of the SCOD value of excess sludge it is possible to estimate an amount of energy potentially obtained during the methane fermentation process. Based on a literature review, it has been estimated that from 1 kg of SCOD it is possible to obtain 3.48 kWh of energy. Taking into account the above methane and energy ratio (i.e. 10 kWh/1Nm3 CH4, it is possible to determine the volume of methane obtained from the tested sludge. Determination of potential energy of sludge is necessary for the use of biogas as a source of power generators as cogeneration and ensure the stability of this type of system. Therefore, the aim of the study was to determine the energy potential of excess sludge subjected to the thermal and chemical disintegration. In the case of thermal disintegration, test was conducted in the low temperature 80°C. The reagent used for the chemical modification was a peracetic acid, which in an aqueous medium having strong oxidizing properties. The time of chemical modification was 6 hours. Applied dose of the reagent was 1.0 ml CH3COOOH/L of sludge. By subjecting the sludge disintegration by the test methods achieved an increase in the SCOD value of modified sludge, indicating the improvement of biodegradability along with a concomitant increase in their energy potential. The obtained experimental production of biogas from disintegrated sludge confirmed that it is possible to estimate potential intensity of its production. The SCOD value of 2576 mg O2/L, in the case of chemical disintegration, was obtained for a dose of 1.0 ml CH3COOH/L. For this dose the pH value was equal 6.85. In the case of thermal disintegration maximum SCOD value was 2246 mg O2/L obtained at 80°C and the time of preparation 6 h. It was estimated that in case of thermal disintegration as well as for the chemical disintegration for selected parameters, the potential energy for model digester of active volume of 5L was, respectively, 0.193 and 0,118 kWh.

  13. Energy potential of the modified excess sludge

    Science.gov (United States)

    Zawieja, Iwona

    2017-11-01

    On the basis of the SCOD value of excess sludge it is possible to estimate an amount of energy potentially obtained during the methane fermentation process. Based on a literature review, it has been estimated that from 1 kg of SCOD it is possible to obtain 3.48 kWh of energy. Taking into account the above methane and energy ratio (i.e. 10 kWh/1Nm3 CH4), it is possible to determine the volume of methane obtained from the tested sludge. Determination of potential energy of sludge is necessary for the use of biogas as a source of power generators as cogeneration and ensure the stability of this type of system. Therefore, the aim of the study was to determine the energy potential of excess sludge subjected to the thermal and chemical disintegration. In the case of thermal disintegration, test was conducted in the low temperature 80°C. The reagent used for the chemical modification was a peracetic acid, which in an aqueous medium having strong oxidizing properties. The time of chemical modification was 6 hours. Applied dose of the reagent was 1.0 ml CH3COOOH/L of sludge. By subjecting the sludge disintegration by the test methods achieved an increase in the SCOD value of modified sludge, indicating the improvement of biodegradability along with a concomitant increase in their energy potential. The obtained experimental production of biogas from disintegrated sludge confirmed that it is possible to estimate potential intensity of its production. The SCOD value of 2576 mg O2/L, in the case of chemical disintegration, was obtained for a dose of 1.0 ml CH3COOH/L. For this dose the pH value was equal 6.85. In the case of thermal disintegration maximum SCOD value was 2246 mg O2/L obtained at 80°C and the time of preparation 6 h. It was estimated that in case of thermal disintegration as well as for the chemical disintegration for selected parameters, the potential energy for model digester of active volume of 5L was, respectively, 0.193 and 0,118 kWh.

  14. Periodontal Healing Distally to Second Mandibular Molar After Third Molar Coronectomy.

    Science.gov (United States)

    Vignudelli, Elisabetta; Monaco, Giuseppe; Gatto, Maria Rosaria Antonella; Franco, Simonetta; Marchetti, Claudio; Corinaldesi, Giuseppe

    2017-01-01

    Coronectomy of mandibular third molars is a procedure that still raises a number of questions. The aim of the present study was to answer one unsolved question: the periodontal healing distal to the mandibular second molar after third molar coronectomy. A prospective cohort study was performed of 30 patients treated at the Unit of Oral and Maxillofacial Surgery of the Department of Biomedical and Neuromotor Science of the University of Bologna. The predictor variables were the probing pocket depth (PPD), the distance between the marginal crest (MC) and the bottom of the osseous defect (BOD), and the distance between the cementum enamel junction (CEJ) and the BOD. These clinical indexes were recorded on 3 points of the distal surface of second molar: the distobuccal (DB), distomedial (DM), and distolingual (DL) sites. The other variables evaluated included root migration and postoperative complications. The Wilcoxon test for paired data and Kendall's tau-b correlation coefficient was used to evaluate all variables. The significance level was set at P = .05. The cohort was composed of 30 patients with 34 high-risk mandibular third molars (9 men and 21 women), with a mean age of 28 ± 7 years. At 9 months, a statistically significant reduction in the PPD of 2 ± 3, 1 ± 2, and 2 ± 2 mm and a statistically significant reduction in the MC-BOD distance of 4 ± 4, 4 ± 4, and 4 ± 5 mm for the DB, DM, and DL sites, respectively, was observed (P = .001). Also, the intraoperative CEJ-BOD distance showed a statistically significant reduction for the DB, DM, and DL sites. After coronectomy, restoration of a clinical healthy periodontium distal to the second molar was observed. However, further studies are necessary to confirm these preliminary clinical results and to compare periodontal healing between coronectomy and complete extraction. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Second molar periodontal inflammatory disease after third molar removal in young adults.

    Science.gov (United States)

    Dicus, Carolyn; Blakey, George H; Faulk-Eggleston, Jan; Hoverstad, Eric; Offenbacher, Steven; Phillips, Ceib; White, Raymond P

    2010-12-01

    To assess the prevalence of periodontal inflammatory disease on the distal side of second molars after third molar removal and the association between presurgical and surgical variables and postsurgical periodontal outcomes. Data before and after surgery from 2 studies approved by an institutional review board were used. In 1 study, 26 subjects had 4 asymptomatic third molars and in the other 49 subjects had at least 1 mandibular third molar with symptoms of pericoronitis. Full-mouth periodontal probing data, 6 sites per tooth, were obtained as a measurement of periodontal status before and after surgery. A probing depth (PD) ≥4 mm on either of the 2 possible probing sites on the distal side of any second molar (D2M) served as an indicator of periodontal inflammatory disease; periodontal health was defined as all D2M PD <4 mm. Cochran-Mantel-Haenszel row mean score tests compared the subjects' postsurgical periodontal status (all D2M PD <4 mm and at least 1 D2M PD ≥4 mm) with respect to age and time intervals, and the Fisher exact test was used to compare ethnicity, gender, and clinical data at surgery. The McNemar test was used to assess the discordance between subjects' pre- and postsurgical periodontal status. The level of significance was set at .05. Of the 75 subjects, 52% were women and 65% were white. The median age at surgery was 23.6 years (interquartile range, 20.9 to 26.6 years). At enrollment, 53 of 75 subjects (71%) had at least 1 D2M PD ≥4 mm. Subjects were significantly more likely to have an improved D2M periodontal status after surgery than a deteriorated status (P < .01). Fewer subjects, 17 of 75 (24%), had at least 1 D2M PD ≥4 mm after surgery. D2M PD ≥4 mm was more likely after surgery if presurgical D2M was PD ≥4 mm (P < .01). Gender, ethnicity, age, presurgical symptoms, and data estimating the extensiveness of surgery were not significantly associated with postsurgical D2M periodontal outcomes. After third molar removal

  16. Adjacent dentigerous cysts with the ectopic displacement of a third mandibular molar and supernumerary (forth) molar: a rare occurrence.

    Science.gov (United States)

    McCrea, Shane

    2009-06-01

    Dentigerous cysts are the most common odontological cysts of the jaws, being associated with the crowns of permanent teeth, especially unerupted mandibular third molars. Multiple dentigerous cysts are rare and most often occur in association with a developmental syndrome. This article presents an unusual case of nonsyndromic adjacent dentigerous cysts associated with a mandibular third molar and a supernumerary molar. This occurrence has not been previously reported.

  17. Ceramic onlay for endodontically treated mandibular molar

    Directory of Open Access Journals (Sweden)

    Roopadevi Garlapati

    2014-01-01

    Full Text Available Restoration of endodontically treated teeth is important for the success of endodontic treatment. In full coverage restorations, maximum amount of tooth structure is compromised, so as to conserve the amount of tooth structure partial coverage restorations, can be preferred. This case report is on fabrication of a conservative tooth colored restoration for an endodontically treated posterior tooth. A 22-year-old male patient presented with pain in the mandibular left first molar. After endodontic treatment, composite material was used as postendodontic restoration. The tooth was then prepared to receive a ceramic onlay and bonded with self-adhesive universal resin cement. Ceramic onlay restoration was periodically examined up to 2 years.

  18. Presence of third molars in orthodontic patients from northern Greece

    Directory of Open Access Journals (Sweden)

    Barka G

    2012-05-01

    Full Text Available Georgia Barka,1 Georgios Tretiakov,1 Theodosios Theodosiou,2 Ioulia Ioannidou-Marathiotou31School of Dentistry, 2Biostatistics, Department of Informatics, School of Natural Sciences, 3Department of Orthodontics, School of Dentistry, Aristotle University of Thessaloniki, Thessaloniki, GreeceObjective: The purpose of the present study was to investigate the frequency of presence of third molar teeth and their distribution in each jaw and each side, according to sex, in a group of orthodontic patients with permanent dentition from northern Greece.Methods: The sample included panoramic radiographs from 220 patients with permanent dentition (mean age 13.62 ± 1.81. The Χ2 test was used to assess the relationships between the variables, and the Fisher's exact test was used in cases where the expected frequencies in each cell were <5.Results: The frequency of third molar presence was 79.1%, and 20.9% was the frequency of third molar agenesis. Intersexual differences in the number of third molars was not statistically significant. There was a correlation between the distribution of third molars on the right and the left side (Fisher's exact test = 100.788; P = 0. The two sides showed the same tendency toward the presence or absence of third molars. A correlation was also found between the distribution of maxillary and mandibular third molars (Fisher's exact test = 24.372; P = 0. In each jaw, the presence or absence of third molars was highly related to the number of third molars found in the other jaw.Conclusion: The present results showed that in this orthodontic group of northern Greek patients, presence accounted for 79.1% and agenesis for 20.9%. No significant difference was found between the frequencies of third molar presence on the left and right sides in either the maxilla or mandible.Keywords: third molars, presence, orthodontic population, Greeks

  19. 10 CFR 904.10 - Excess energy.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Excess energy. 904.10 Section 904.10 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.10 Excess energy. (a) If excess Energy is determined by the United States to be available...

  20. 43 CFR 426.12 - Excess land.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Excess land. 426.12 Section 426.12 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR ACREAGE LIMITATION RULES AND REGULATIONS § 426.12 Excess land. (a) The process of designating excess and...

  1. Excess water dynamics in hydrotalcite: QENS study

    Indian Academy of Sciences (India)

    Abstract. Results of the quasi-elastic neutron scattering (QENS) measurements on the dynamics of excess water in hydrotalcite sample with varied content of excess water are reported. Translational motion of excess water can be best described by random transla- tional jump diffusion model. The observed increase in ...

  2. Shear bond strength evaluation of bonded molar tubes on fluorotic molars.

    Science.gov (United States)

    Silva-Benítez, Erika L; Zavala-Alonso, Veronica; Martinez-Castanon, Gabriel A; Loyola-Rodriguez, Juan P; Patiño-Marin, Nuria; Ortega-Pedrajo, Irene; García-Godoy, Franklin

    2013-01-01

    To study the shear bond strength (SBS), sites of failure, and micromorphology of bonded molar tubes used on teeth affected by dental fluorosis. This in vitro study included 140 first molars classified according to Dean's index for dental fluorosis. Samples were divided into seven groups: (1) healthy teeth etched for 15 seconds, (2) teeth with moderate fluorosis (MOF) etched for 15 seconds, (3) teeth with MOF etched for 150 seconds, (4) teeth with MOF microabrasion etched for 15 seconds, (5) teeth with severe fluorosis (SEF) etched for 15 seconds, (6) teeth with SEF etched for 150 seconds, and (7) teeth with SEF microabrasion etched for 15 seconds. All samples were incubated and were then submitted to the SBS test and evaluated with the modified adhesive remnant index (ARI) and analyzed by using a scanning electronic microscope. The SBS mean value for healthy enamel was 20 ± 10.2 MPa. For the group with MOF, the etched 150-second mean value was the highest (19 ± 7.6 MPa); for the group with SEF treated with microabrasion and etched for 15 seconds, the mean value was (13 ± 4.1 MPa). Significant differences (P ≤ .05) were found in the ARI between healthy and fluorosed groups. Fluorotic enamel affects the adhesion of bonded molar tubes. The use of overetching in cases of MOF and the combination of microabrasion and etching in SEF provides a suitable adhesion for fixed appliance therapy.

  3. Histomorphometric evaluation of maxillary molar roots and surrounding periodontium following molar intrusion in rats.

    Science.gov (United States)

    Choi, Y J; Kim, K H; Lee, K J; Chung, C J; Park, Y C

    2015-02-01

    To investigate periodontal tissue changes during and after molar intrusion in rats. The Department of Orthodontics at Yonsei University. Thirty 12-week-old male rats were assigned to 1 control and 5 experimental groups (n = 5 each). In the experimental groups, two maxillary molars were intruded for 2 weeks; the control group underwent the same procedures without the intrusion force. After 2 weeks of intrusion, rats in one of the experimental groups and in the control group were killed. In the other four experimental groups, the new molar positions were either retained or not retained with an occlusal bite block for 1 or 2 weeks prior to euthanization. Histomorphometric analysis was performed for sulcus depth, osteoclast number per unit alveolar bone length, and root resorption area per unit root surface length. Sulcus depth increased during intrusion (P intrusion (P intrusion, irrespective of the retention regimen, relative to that of the control group (P intrusion and that the surrounding periodontium remodeled accordingly as tooth positions were altered, regardless of retention regime. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Interspecific and intraspecific variation in selenium:mercury molar ratios in saltwater fish from the Aleutians: Potential protection on mercury toxicity by selenium

    Science.gov (United States)

    Burger, Joanna; Gochfeld, Michael; Jeitner, Christian; Donio, Mark; Pittfield, Taryn

    2014-01-01

    A number of factors affect the consumption risk from mercury in fish, including mercury levels, seasonal patterns of mercury concentrations, human consumption patterns, and sensitive populations (e.g. pregnant women, fetuses, young children, and yet unknown genetic factors). Recently the protective effects of selenium on methylmercury toxicity have been publicized, particularly for saltwater fish. We examine levels of mercury and selenium in several species of fish and seabirds from the Aleutians (Alaska), determine selenium:mercury molar ratios, and examine species-specific and individual variation in the ratios as a means of exploring the use of the ratio in risk assessment and risk management. Variation among species was similar for mercury and selenium. There was significant inter-specific and intraspecific variation in selenium:mercury molar ratios for fish, and for birds. The mean selenium:mercury molar ratios for all fish and bird species were above 1, meaning there was an excess of selenium relative to mercury. It has been suggested that an excess of selenium confers some protective advantage for salt water fish, although the degree of excess necessary is unclear. The selenium:mercury molar ratio was significantly correlated negatively with total length for most fish species, but not for dolly varden. Some individuals of Pacific cod, yellow irish lord, rock greenling, Pacific halibut, dolly varden, and to a lesser extent, flathead sole, had selenium:mercury ratios below 1. No bird muscle had an excess of mercury (ratio below 1), and only glaucous-winged gull and pigeon guillemot had ratios between 1 and 5. There was a great deal of variation in selenium:mercury molar ratios within fish species, and within bird species, making it difficult and impractical to use these ratios in risk assessment or management, for fish advisories, or for consumers, particularly given the difficulty of interpreting the ratios. PMID:22664537

  5. An audit of impacted mandibular third molar surgery | Obimakinde ...

    African Journals Online (AJOL)

    Methodology: We carried out a descriptive clinical study involving patients who presented for management of impacted third molar between January 2010 and December 2011. Demography of the patients including third molar spatial relationship, indications for surgery and pre- and post-operative visual analogue score for ...

  6. Internal root morphology in maxillary first permanent molars in a ...

    African Journals Online (AJOL)

    Objective: To determine the internal root morphology and gender variations in maxillary first permanent molars in a Kenyan population. Design: In vitro descriptive cross-sectional study. Setting: School of Dental Sciences, University of Nairobi. Subject: One hundred and eighty seven maxillary first permanent molars were ...

  7. Incomplete molar pregnancy with live coexisting fetus: a case report

    Directory of Open Access Journals (Sweden)

    Leila Pourali

    2014-03-01

    Conclusion: The rate of pregnancy complications such as hypertension, hyperthyroidism, and obstetrics hemorrhage and also the risk of Gestational Trophoblastic Neoplasm (GTN are increasing in incomplete molar pregnancy. Therefore, early diagnosis and timely treatment of molar pregnancy is very important to reduce maternal morbidity and mortality.

  8. Case report - Ectopic molar pregnancy: A case report | Bousfiha ...

    African Journals Online (AJOL)

    The incidence of hydatidiform moles is 1 per 1,000 pregnancies. Ectopic pregnancy occurs in 20 per 1,000 pregnancies. Thus, the incidence of the ectopic molar gestation is very rare. We report a case of tubal molar pregnancy diagnosed at the systematic histology exam of an ectopic pregnancy. We report the case of 32 ...

  9. Evaluation of radiographic features of embedded primary molar ...

    African Journals Online (AJOL)

    Background: The roots of primary molars were found in the permanent dentition without symptoms on the clinical or radiographic examination. However, their incidence could not be achieved on the current literature. Objective: The aim of this study is to evaluate the radiographic features of the embedded primary molar roots ...

  10. Impacted Mandibular Third Molars: Review of Literature and a ...

    African Journals Online (AJOL)

    impacted mandibular third molar surgery: 1‑year results. Int. J Periodontics Restorative Dent 1993;13:397. 43. Edwards MJ, Brickley MR, Goodey RD, Shepherd JP. The cost, effectiveness and cost effectiveness of removal and retention of asymptomatic, disease free third molars. Br Dent. J 1999;187:380‑4. 44. Smith WP.

  11. [Supernumerary teeth located in molar region: three cases report].

    Science.gov (United States)

    Dai, Jie; Yang, Weijiang; Shen, Xuanjiang

    2011-08-01

    Supernumerary teeth is one of the teeth dysplasia that the number of teeth exceeded normal. Most of supernumerary teeth reported were located in anterior teeth region, but rare cases were reported in molar region. This paper reported three cases that supernumerary teeth located in molar region.

  12. Molar incisor hypomineralisation: clinical management of the young patient.

    LENUS (Irish Health Repository)

    Daly, Dympna

    2009-04-01

    Molar incisor hypomineralisation (MIH) is a common developmental condition resulting in enamel defects in first permanent molars and permanent incisors. It presents at eruption of these teeth. Early diagnosis is essential since rapid breakdown of tooth structure may occur, giving rise to acute symptoms and complicated treatment. The purpose of this article is to review MIH and illustrate its clinical management in young children.

  13. Changes in heart rate during third molar surgery

    NARCIS (Netherlands)

    Hollander, M. H. J.; Schortinghuis, J.; Vissink, A.

    2016-01-01

    Anxiety is an undesirable psychological phenomenon. Patients are usually anxious when subjected to third molar surgery, but the pattern of anxiety is unknown. The aim of this study was to assess the intensity and course of anxiety during third molar surgery. This study included 48 consecutive

  14. Variant root morphology of third mandibular molar in normal and ...

    African Journals Online (AJOL)

    Variant root morphology of third mandibular molar in normal and impacted teeth. Isaac Kipyator Bokindo, Fawzia Butt, Francis Macigo. Abstract. The mandibular third molar poses a challenge to dental surgeons due to it's unpredictable morphology which leads to increased difficulty during its extraction. The root morphology ...

  15. Fatigue resistance of CAD/CAM resin composite molar crowns.

    NARCIS (Netherlands)

    Shembish, F.A.; Tong, H.; Kaizer, M.; Janal, M.N.; Thompson, V.P.; Opdam, N.J.M.; Zhang, Y.

    2016-01-01

    OBJECTIVE: To demonstrate the fatigue behavior of CAD/CAM resin composite molar crowns using a mouth-motion step-stress fatigue test. Monolithic leucite-reinforced glass-ceramic crowns were used as a reference. METHODS: Fully anatomically shaped monolithic resin composite molar crowns (Lava

  16. Indications and risk factors for complications of lower third molar ...

    African Journals Online (AJOL)

    Aim: The aim of this study was to determine the surgical indications and risk factors for complications of third molar surgery at a Nigerian teaching hospital. ... records of patients referred to the Oral Surgery Clinic of our institution for surgical extraction of their impacted mandibular third molars from January 2008 to December ...

  17. Impacted Mandibular Third Molars: Review of Literature and a ...

    African Journals Online (AJOL)

    Keywords like impaction, mandibular third molar, impacted mandibular third molar, complications, anatomy, inferior alveolar nerve injury, lingual nerve injury were used to search the databases. A total of 826 articles were screened, and 50 articles were included in the review which was obtained from 1980 to February 2015.

  18. Prematurely erupted tooth in the molar region | Denloye | Nigerian ...

    African Journals Online (AJOL)

    This paper reports the case of a thirty-three-day old male child who was seen at the outpatient clinic of the University College Hospital, Ibadan with a tooth- like structure in the maxillary right molar region. This firm structure which resembled a primary molar had only two definite buccal cusps, no lingual cusp and no occlusal ...

  19. Pathomorphology of Molar Gestation in Zaria | Mayun | Nigerian ...

    African Journals Online (AJOL)

    Background: Molar gestations are a source of significant morbidity with increased risk of mortality from their complications if not identified and treated early enough. Objective: This study aims at histologically reviewing and analyzing all cases of molar gestations seen in the Histopathology Department of Ahmadu Bello ...

  20. Internal root morphology in mandibular first permanent molars in a ...

    African Journals Online (AJOL)

    Objective: To determine the internal root morphology and gender variations in mandibular first permanent molars in a Kenyan population. Design: In vitro descriptive cross sectional study. Setting: School of Dental Sciences, University of Nairobi Results: The mesial root of mandibular first molars had two canals in 96.3% of ...

  1. Molar pregnancy: a ten year review at Onitsha, Nigeria | Obiechina ...

    African Journals Online (AJOL)

    The incidence of molar pregnancy was 1:332 deliveries or 1.416 pregnancies. There was no definite age pattern in the distribution of molar pregnancy. The commonest clinical presentation was recurrent vaginal bleeding 90.6% while the least was uterine size less than date in 3.8% of the cases. Syntocinon induction with ...

  2. [Clinical analysis of caries status of the mandibular second molar].

    Science.gov (United States)

    You, Chun-an; Zheng, Ping; Hu, Ning; Su, Qin

    2014-04-01

    To collect the cases which have caries on the mandibular second molar and analyze the caries status and correlative factors. Patients treated in the Department of Endodontics in West China Hospital of Stomatology were randomly collected. The baseline information, primary sites and severity of dental caries on the mandibular second molar, and eruption pattern of the mandibular third molar were recorded. The data was analyzed with SPSS13.0 software package. Four hundred eighty-one patients including 227 males and 254 females were collected. Caries on the mandibular second molar starting from the occlusal, distal proximal and buccal surfaces accounted for 33.8%, 33.2% and 24.4%, respectively. Caries involving dental pulp (49.7%) were significantly more than deep and shallow to moderate caries (31.7% and 18.6%). Gender was not correlated with the site and severity of caries. However, impacted mandibular third molars and age were significantly related to both caries site and severity. Occlusal and distal proximal surfaces are the most predisposed sites to have caries on mandibular second molar. Impacted mandibular third molar and age are significantly related to caries of mandibular second molar.

  3. Prevalent of root resorption of second molar adjustment the impacted third molar in prepiacal and panoramic radiographs

    Directory of Open Access Journals (Sweden)

    Mohammad Ebrahimi Saravi

    2013-10-01

    Full Text Available   Background and Aims: Impacted third molar reduces the bone level in the distal aspect of second molar, and sometimes it can lead to root resorption of the adjacent tooth. The purpose of this study was to determine this resorption using panoramic and periapical radiographs.   Materials and Methods: In this cross-sectional descriptive study 54 patient (28 men, 26 women above 15 years old with the average of 22 years in Oral and Maxillofacial Department of Tehran University were studied. A periapical radiography from the third molar and a panoramic radiograph were taken from each patient (Because of their routine use and evaluation of accuracy of panoramic compared with periapical, and the magnitude of the root resorption for the second molar was determined by 2 observers and written in a questionnaire. Data were analyzed using Fisher test.   Results: The prevalence of the root resorption of the second molar adjacent to the impacted third molar in the panoramic and the periapical radiographies, with respect to the limitation of the sample size were 46.3% and 31.5%, respectively, with 95% confidence(P>0.05. Most of these resorptions were in the cervical third of the second molar roots and in cases in which the third molars were mesially oriented or horizontal. There was also no significant difference between panoramic and periapical radiographs.   Conclusion: Due to the increased risk of the resorption of the second molar adjacent to the third molar, extraction of the impacted third molars, especiall y mesially oriented or horizontal ones are recommended.

  4. Pulpotomies with portland cement in human primary molars

    Directory of Open Access Journals (Sweden)

    Taísa Regina Conti

    2009-02-01

    Full Text Available Two clinical cases in which Portland cement (PC was applied as a medicament after pulpotomy of mandibular primary molars in children are presented. Pulpotomy using PC was carried out in two mandibular first molars and one mandibular second molar, which were further followed-up. At the 3, 6 and 12-month follow-up appointments, clinical and radiographic examinations of the pulpotomized teeth and their periradicular area revealed that the treatments were successful in maintaining the teeth asymptomatic and preserving pulpal vitality. Additionally, the formation of a dentin bridge immediately below the PC could be observed in the three molars treated. PC may be considered as an effective alternative for primary molar pulpotomies, at least in a short-term period. Randomized clinical trials with human teeth are required in order to determine the suitability of PC before unlimited clinical use can be recommended.

  5. Sleepiness or excessive daytime somnolence.

    Science.gov (United States)

    Edd, Ethel Mitty; Flores, Sandi

    2009-01-01

    Excessive daytime somnolence (EDS) is associated with age-related changes, environment, circadian rhythm or sleep pattern disorder, insomnia, medications, lifestyle factors, depression, pain, and illness. The notion of "sleep architecture" connotes a structure that describes the sleep cycle (i.e., stages) and wakefulness during a single sleep period-that is, rapid eye movement (REM) and non-REM sleep. Circadian rhythms perform a variety of functions including regulation of the quality and distribution of the stages of sleep. Insomnia includes delayed sleep onset as well as premature wakening; sleep is nonrestorative. Comorbidities associated with insomnia are Alzheimer's disease and other dementias, delirium, depression, congestive heart failure, chronic obstructive pulmonary disease, gastroesophageal reflux disease, pain, degenerative diseases of the neurological system, and sleep apnea. Continuous inadequate sleep affects cognitive function, physical performance, overall well-being, and quality of life. There is a greater risk of falls from insomnia than is the use of hypnotics to manage it. Sleep disruption among older adults is underrecognized and undertreated. Assessment using valid tools can be performed rapidly. There are a variety of treatment options, including sleep hygiene and pharmacological and alternative modalities.

  6. Extraction of maxillary first molars improves second and third molar inclinations in Class II Division 1 malocclusion

    NARCIS (Netherlands)

    Livas, C.; Halazonetis, D.J.; Booij, J.W.; Katsaros, C.

    2011-01-01

    INTRODUCTION: The aim of this study was to assess the changes in inclination of the maxillary second (M2) and third (M3) molars after orthodontic treatment of Class II Division 1 malocclusion with extraction of maxillary first molars. METHODS: Two groups of subjects were studied. The experimental

  7. 75 FR 27572 - Monthly Report of Excess Income and Annual Report of Uses of Excess Income

    Science.gov (United States)

    2010-05-17

    ... URBAN DEVELOPMENT Monthly Report of Excess Income and Annual Report of Uses of Excess Income AGENCY... subject proposal. Project owners are permitted to retain Excess Income for projects under terms and conditions established by HUD. Owners must request to retain some or all of their Excess Income. The request...

  8. Eruption status of third molars in South Indian city

    Directory of Open Access Journals (Sweden)

    Sujata M Byahatti

    2011-01-01

    Full Text Available Aim : The aim of the present study is to determine the number of third molars per person, angulation, level, amount of space for eruption of third molar between ramus of mandible and second molar status of root and also to study the difficulty index. Objective: To study the eruption status of third molar in South Indian population. Materials and methods: The study conducted at Department of Oral Medicine and Radiology. Maratha Mandals NG Halgekar College of Dental Sciences and Research Centre. Belgaum, Karnataka, India A total of 150 patients (54 females and 96 males visiting outpatient department between the age group of 17 and 30 with a mean age of 23.5 years were selected- Before starting the study, ethical concern taken from the ethical committee and informed consent from each patent who underwent radiographic examination. Results: The results showed approximately 94.66% of the subjects had all four third molars, 8.6% had three third molars, 4.6% had two third molars and 2% had one third molars with 3.3% having agenesis of all third molars. Third molar agenesis showed predilection for upper jaw with higher proportion in females (5 5% than males (2%. Angular position seen maximum with vertical position (66.16% with least being horizontal impactions. Level of occlusal plane of third molar similar to that of adjacent tooth seen in 52.65%. Below the occlusal plane in 19.61 %, totally impacted teeth noted in 27.73%. More than 75% of the teeth had complete root formation. Among total number of teeth, 518 (91.51 % teeth were easy to extract and remaining 33 (5.8% were difficult to extract. Conclusion: Radiological and clinical findings have correlated to assess whether teeth were easy to extract or difficult. Because of the increasing incidence of unerupted third molars and the association of numerous complications with these retained teeth, assessment of germ position and prognosis of third molar eruption is necessary for better patient management.

  9. Excess enthalpies of binary mixtures of 1-hexene with some branched alkanes at the temperature 298.15 K[Excess enthalpy; Binary mixture; 1-Hexene; Branched alkanes; Liebermann-Fried model

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhaohui; Benson, George C.; Lu, Benjamin C.-Y. E-mail: lu@eng.uottawa.ca

    2004-01-01

    Measurements of excess molar enthalpies at the temperature 298.15 K in a flow microcalorimeter are reported for the five binary mixtures formed by mixing 1-hexene with the branched alkanes: 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane, 2,3-dimethylbutane, and 2,2,4-trimethylpentane. Smooth Redlich-Kister representations of the results are described. It was found that the Liebermann-Fried model also provided good representations of the results.

  10. Molar-incisor hypomineralization: Therapeutic challenge to paediatric dentistry practice

    Directory of Open Access Journals (Sweden)

    Stojković Branislava

    2017-01-01

    Full Text Available Introduction: Molar incisor hypomineralization indicates the appearance of enamel hypomineralization of systemic origin which occurs in 1-4 first permanent molars, which is often accompanied by changes on permanent incisors. Variations in clinical manifestation, together with commonly present asymmetry, are the reason for large variations in the needs for therapeutic treatment of these structural enamel defects. Case study: Two patients with diagnosed molar incisor hypomineralization are shown. The first patient, a six-year-old girl, with diagnosed mild clinical form, visited the dentist immediately after the eruption of the first permanent molars. Early diagnosis and timely application of preventive-profilactic measures, together with mild clinical form, are the reason for prevention of dental caries and further spreading of posteruptive enamel breakdown on affected first molars. Unlike the first one, the second patient, a 7,5-year-old girl had the diagnosis of moderate molar incisor hypomineralization. She developed dental caries on tooth 46 as well as complication in dental caries on tooth 36 which was extracted soon after the eruption. Conclusion: Early diagnosis and the severity of clinical appearance are the most important factors which determine therapeutic outcome of the treatment of molar incisor hypomineralization.

  11. Response of molars and non-molars to a strict supragingival control in periodontal patients

    Directory of Open Access Journals (Sweden)

    Patrícia Daniela Melchiors Angst

    2013-02-01

    Full Text Available The posterior position in the arches is one of the factors that underlies the poor prognosis of molar teeth (M. It is speculated that M do not benefit from the oral hygiene routine as well as non-molars (NM do. This study evaluated the response of M and NM to supragingival control during a 6-month period in 25 smokers (S and 25 never-smokers (NS with moderate-to-severe periodontitis. One calibrated examiner assessed visible plaque (VPI and gingival bleeding (GBI indexes, periodontal probing depth (PPD, bleeding on probing (BOP, and clinical attachment loss (CAL at days 0 (baseline, 30 and 180. At baseline, M showed significantly higher mean values of VPI (p = 0.017 and PPD (p < 0.001 compared with NM; CAL was also greater in M (p < 0.001 and was affected by smoking (p = 0.007. The reductions obtained for periodontal indicators at day 180 showed similar responses between M and NM. For CAL, M (NS 0.57 ± 0.50; S 0.67 ± 0.64 and NM (NS 0.38 ± 0.23; S 0.50 ± 0.33 reached an almost significant difference (p = 0.05. Smoking did not influence the response to treatment. Multilevel analysis revealed that, only for PDD reductions, the interaction between sites, teeth and patient was significant (p < 0.001. It was concluded that M benefit from an adequate regimen of supragingival biofilm control; therefore, supragingival condition should be considered in the prognosis of molar teeth.

  12. Surgical approach to impacted mandibular third molars--operative classification.

    Science.gov (United States)

    Abu-El Naaj, Imad; Braun, Refael; Leiser, Yoav; Peled, Micha

    2010-03-01

    The aim of the present study is to suggest a convenient way to classify the position of the impacted third mandibular molar relative to the mandibular canal and to suggest indications for the use of each surgical approach for mandibular third molar extraction. The presented new typing system, Third Molar Classification (TMC), is a simple and easy-to-apply method for the surgical management of mandibular third molars and can be extended for any ectopic or impacted mandibular tooth. There are 3 major types of third molar positions. The second type is subdivided further into 2 subtypes. In the present study, 9 patients with high-risk mandibular third molars were treated according to the present classification and are presented and discussed. Patients typed as TMC IIb were treated with a sagittal split osteotomy approach and patients typed as TMC III were treated with an extraoral approach. The operative classification was successfully implemented in very rare cases of deeply impacted mandibular third molars. In 3 of 9 cases (33%) minor complications included some degree of hypoesthesia using the extraoral approach; these complications resolved spontaneously without the need for any intervention. The present study describes the use of a new surgical classification system for treatment planning in all types of mandibular third molar extractions. We believe that the present classification could help the oral and maxillofacial surgeon in decision-making and limit the possible risks that are present when attempting to extract impacted mandibular third molars. Copyright (c) 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  13. Immediate transmucosal implant placement in molar extraction sites: a 12-month prospective multicenter cohort study.

    Science.gov (United States)

    Cafiero, C; Annibali, S; Gherlone, E; Grassi, F R; Gualini, F; Magliano, A; Romeo, E; Tonelli, P; Lang, N P; Salvi, G E

    2008-05-01

    To assess the clinical and radiographic outcomes of immediate transmucosal placement of implants into molar extraction sockets. Twelve-month multicenter prospective cohort study. Following molar extraction, tapered implants with an endosseous diameter of 4.8 mm and a shoulder diameter of 6.5 mm were immediately placed into the sockets. Molars with evidence of acute periapical pathology were excluded. After implant placement and achievement of primary stability, flaps were repositioned and sutured allowing a non-submerged, transmucosal healing. Peri-implant marginal defects were treated according to the principles of guided bone regeneration (GBR) by means of deproteinized bovine bone mineral particles in conjunction with a bioresrobable collagen membrane. Standardized radiographs were obtained at baseline and 12 months thereafter. Changes in depth and width of the distance from the implant shoulder (IS) and from the alveolar crest (AC) to the bottom of the defect (BD) were assessed. Eighty-two patients (42 males and 40 females) were enrolled and followed for 12 months. They contributed with 82 tapered implants. Extraction sites displayed sufficient residual bone volume to allow primary stability of all implants. Sixty-four percent of the implants were placed in the areas of 36 and 46. GBR was used in conjunction with the placement of all implants. No post-surgical complications were observed. All implants healed uneventfully yielding a survival rate of 100% and healthy soft tissue conditions after 12 months. Radiographically, statistically significant changes (Pcrestal bone levels were observed from baseline to the 12-month follow-up. The findings of this 12-month prospective cohort study showed that immediate transmucosal implant placement represented a predictable treatment option for the replacement of mandibular and maxillary molars lost due to reasons other than periodontitis including vertical root fractures, endodontic failures and caries.

  14. Autotransplantation of a mandibular third molar: A case report

    Directory of Open Access Journals (Sweden)

    Elham Najafi

    2017-09-01

    Full Text Available Tooth autotransplantation defines as transition of one tooth from one position to another, in same individual. It is a biological procedure in which teeth have the potential to induce alveolar bone growth. It can be applied in patients before adolescence growth is finished. It significantly reduces time and cost compared to implants. Healing rapidly occurs and function is regained almost immediately. Our case was a 15-year-old male that his left mandibular third molar transplanted to the second molar sight after extraction of second molar because of unrestorable crown. During 9 month follow up transplanted tooth was asymptomatic, functional and responsive to sensibility tests. (Cold test, EPT.

  15. Molar Pregnancy with a Co-Existing Viable Fetus

    Directory of Open Access Journals (Sweden)

    Ruya Deveer

    2014-03-01

    Full Text Available     The aim of this study was to report the clinical features, management, and outcome of a case of molar pregnancy with a coexisting viable fetus and to review the literature. In this article, we report a case of pregnancy with diffuse placental molar change and a normal fetus which presented with hyperemesis gravidarum and hyperthyroidism. Genetic amniocentesis showed normal fetal karyotype. A healthy full-term live male infant was delivered by cesarean section. In molar pregnancies with a normal karyotype fetus, with intensive maternal follow-up, continuation of pregnancy can be suggested.

  16. Elongational viscosity of narrow molar mass distribution polystyrene

    DEFF Research Database (Denmark)

    Bach, Anders; Almdal, Kristoffer; Rasmussen, Henrik Koblitz

    2003-01-01

    above the linear viscoelastic prediction at intermediate strains, indicating strain hardening. The steady elongational viscosities are monotone decreasing functions of elongation rate. At elongation rates larger than the inverse reptation time, the steady elongational viscosity scales linearly......Transient and steady elongational viscosity has been measured for two narrow molar mass distribution polystyrene melts of molar masses 200 000 and 390 000 by means of a filament stretching rheometer. Total Hencky strains of about five have been obtained. The transient elongational viscosity rises...... with molar mass at fixed elongation rate....

  17. [Germectomy. The germ of the third mandibular molar in children: remove or preserve?].

    Science.gov (United States)

    Voorsmit, R A; van den Bergh, A W

    1992-11-01

    Third molars are often removed in order to prevent complications and various other problems associated with impacted third molars and their removal. Abortion of mandibular third molars is a procedure carried out at an early age in those subjects where there is insufficient room for the eruption of the third molars. On the other hand one can also decide to remove the second molars and to annexate orthodontically the third molars in the arch.

  18. A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage.

    Science.gov (United States)

    Kang, Ju-Man; Park, Jae Hyun; Bayome, Mohamed; Oh, Moonbee; Park, Chong Ook; Kook, Yoon-Ah; Mo, Sung-Seo

    2016-09-01

    This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

  19. Review of molar tooth structure research

    Directory of Open Access Journals (Sweden)

    Hong-Wei Kuang

    2014-10-01

    Full Text Available For more than a century, molar tooth structure (MTS has been studied. The study developed in three stages. During the first stage (before 1980, researchers described three basic morphologies of MTS, mainly from the Belt Supergroup in North America, and they provided several hypotheses for the origin of MTS. During the second stage (1980–1999, the frequent discoveries of MTS on all continents resulted in many detailed descriptions of their shape and in several hypotheses concerning the origin of MTS. Notably, hypotheses of MTS’s origin such as seismic activity and biological activity were developed. Since 2000, research has progressed into a new stage (the third stage. This is due to discoveries of MTS in the Meso–Neoproterozoic of China and elsewhere, and the ongoing debate on the seismic or biological origin is replaced by a hypothesis that involves gas expansion and chemically-controlled carbonate precipitation (both of them possibly affected by biological activities. This latter idea has gradually been commonly recognized as the mainstream theory. Despite continued disagreements, researchers now agree that microsparry calcite played a controlling role regarding the development and the global distribution of MTS in time and space during the Proterozoic, the morphological diversity, and the impact on the sedimentary environment. The present contribution analyses the three major hypotheses regarding the origin of MTS; it also discusses the shortcomings of the hypotheses regarding a seismic or biologic origin, and it details the modern hypothesis that links formation of cracks to the precipitation of sparry calcite. It is deduced that important questions dealing with the Precambrian can be answered, among other aspects regarding the depositional palaeogeography and stratigraphic correlations.

  20. Preformed crowns for decayed primary molar teeth.

    Science.gov (United States)

    Innes, Nicola P T; Ricketts, David; Chong, Lee Yee; Keightley, Alexander J; Lamont, Thomas; Santamaria, Ruth M

    2015-12-31

    Crowns for primary molars are preformed and come in a variety of sizes and materials to be placed over decayed or developmentally defective teeth. They can be made completely of stainless steel (know as 'preformed metal crowns' or PMCs), or to give better aesthetics, may be made of stainless steel with a white veneer cover or made wholly of a white ceramic material. In most cases, teeth are trimmed for the crowns to be fitted conventionally using a local anaesthetic. However, in the case of the Hall Technique, PMCs are pushed over the tooth with no local anaesthetic, carious tissue removal or tooth preparation. Crowns are recommended for restoring primary molar teeth that have had a pulp treatment, are very decayed or are badly broken down. However, few dental practitioners use them in clinical practice. This review updates the original review published in 2007. Primary objectiveTo evaluate the clinical effectiveness and safety of all types of preformed crowns for restoring primary teeth compared with conventional filling materials (such as amalgam, composite, glass ionomer, resin modified glass ionomer and compomers), other types of crowns or methods of crown placement, non-restorative caries treatment or no treatment. Secondary objectiveTo explore whether the extent of decay has an effect on the clinical outcome of primary teeth restored with all types of preformed crowns compared with those restored with conventional filling materials. We searched the following electronic databases: Cochrane Oral Health Group Trials Register (to 21 January 2015), Cochrane Central Register of Controlled Trials (CENTRAL; The Cochrane Library, 2014, Issue 12), MEDLINE via Ovid (1946 to 21 January 2015) and EMBASE via Ovid (1980 to 21 January 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the World Health Organization (WHO) International Clinical Trials Registry Platform for ongoing trials and Open Grey for grey literature (to

  1. A novel approach for building up infraoccluded ankylosed primary molars in cases of missing premolars: A case report.

    Science.gov (United States)

    Lygidakis, N A; Chatzidimitriou, K; Lygidakis, N N

    2015-10-01

    In cases of infraoccluded primary molars associated with agenesis of premolars, any treatment plan occasionally includes retention of the primary teeth for space preservation and future implant placement if needed. In these cases, building up the crowns to the occlusal line is necessary to prevent various clinical problems. The present case report describes in detail a novel but simple clinical approach for retention and building up of the crown of infraoccluded primary molars. The technique is presented in a 14-year-old girl with nine missing permanent teeth. Orthodontic evaluation indicated space closure for five teeth and space maintenance in the remaining four second primary molars, three of them being infraoccluded. The technique included the following clinical steps: (a) elastic separators were placed proximally to the primary molars for few days to create space; (b) proximal minimal reduction of the crown width was performed; a direct hand composite resin core was made to increase crown height facilitating the selection of a preformed metal crown (PMC). The selected PMC was filled with self-curing composite resin and placed on the primary tooth following an acid etch and adhesive procedure; excess cervical material was removed; (c) after polymerisation, the PMC was carefully removed using cutting and hand instruments, revealing the composite resin fabricated crown which was adjusted for occlusion and polished. Radiographic evaluation confirmed the result. This simple method for infraoccluded primary molars crown building up to occlusion using conventional instruments and materials, appears to be a valuable clinical tool for paediatric dentists who frequently find themselves dealing with primary teeth that need to be retained and which can produce serious clinical problems if left untreated.

  2. Role of the excess monomer in the growth of urea and formaldehyde resin deposit particles.

    Science.gov (United States)

    Hao, Zhixian; Guo, Yuqing; Mansuer, Mulati; Zhu, Junfu; Zhu, Zhirong

    2014-09-15

    The role of excess monomer (i.e., Urea (U) or Formaldehyde (F)) in UF precipitation reaction was investigated at 28°C. The maximum output of the UF resin deposit was found around the U:F molar ratio 1.0:1.0 and this output decreased if excessive urea (or formaldehyde) was used in the reaction system. The excess monomer was considered to decrease the polymerization degree of UF resin deposit and increased the bonding saturation of its copolymerization monomer as well as the solubility of the UF resin deposit. The Influence of the excess monomer on the lamellar crystallinity of the resultant deposit, involving the polymerization degree and bonding saturation of the monomer, was examined. Three different dynamic regions containing excess monomers were revealed according to the behaviors of the deposit nucleation. The density and water absorption of the UF resin particles were finally demonstrated relative to the dynamic regions in their nucleation reactions. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. Mandibular second molar periodontal healing after impacted third molar extraction in young adults.

    Science.gov (United States)

    Faria, Ana Inocêncio; Gallas-Torreira, Mercedes; López-Ratón, Mónica

    2012-12-01

    To estimate the prevalence of preoperative periodontal defects and analyze 12-month spontaneous healing on the distal aspect of the mandibular second molar (M2) after impacted mandibular third molar (M3) extraction. This prospective clinical study was conducted in 25 healthy young patients (21.03 ± 4.38 yr old) with 40 extractions of higher-risk periodontal impacted M3s. Plaque and gingival indexes, recession, bleeding on probing, probing depth (PD), and attachment level were recorded before surgery and at 3, 6, and 12 months after surgery at 5 sites on the distal aspect of the M2. The initial mean PD was 5.70 ± 3.80 mm, with the deepest mean PD at the lingual side. At 12 months, a mean PD average of 3.77 ± 2.86 mm was recorded, with a total average recovery of 1.93 ± 2.46 mm (P periodontal defects that are deepest at the lingual side and almost recover at 12 months after extraction. The first 3 months is considered the cutoff for periodontal healing. Young adults with high-risk periodontal M3 impactions may benefit from early extraction, which increases spontaneous periodontal healing. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  4. Hipomineralização molar-incisivo = Molar incisor hypomineralization

    Directory of Open Access Journals (Sweden)

    Basso, Ana Paula

    2007-01-01

    Full Text Available A hipomineralização-molar incisivo (HMI é um defeito de origem sistêmica no esmalte dentário de primeiros molares e incisivos permanentes. Nesta condição, o esmalte hipomineralizado é frágil e pode se destacar facilmente, deixando a dentina exposta e causando, assim, problemas como sensibilidade dentária e maior risco ao estabelecimento de lesões de cárie. A HMI é freqüentemente confundida com fluorose ou amelogênese imperfeita e sua prevalência varia de 3,6 a 25%. Vários fatores etiológicos são citados para a condição e estão freqüentemente relacionados com doenças na infância nos primeiros três anos de vida. O tratamento envolve desde a restauração dos dentes afetados com materiais adesivos ou até mesmo a extração dos mesmos, dependendo da severidade do caso

  5. Coastal Meringues: Are Salt Marshes Inflated with Excess Void Spaces?

    Science.gov (United States)

    Gunnell, J. R.

    2016-02-01

    Failure to stay above sea level is among many ways that salt marshes may be destroyed. This race against the sea is carried out by vertical accretion. Accretion is partly the accumulation of material mediated by vegetative and sedimentary feedbacks. Prognoses for salt marshes based on studies of these variables have proven useful, but they may also be failing to read between the lines. After all, the majority of a salt marsh's volume is typically comprised of void spaces, which seem to be under-examined in our current predictions of salt marsh survival. Salt marshes may be inflated with excess void spaces, occupying greater volumes than sedimentary predictions would otherwise assume. To test this hypothesis, benthic porosity measurements were drawn from a USGS database of thousands of seabed samples along the U.S. Atlantic and Gulf coasts. Seabed porosities were used to geostatistically interpolate expected porosities at selected salt marsh sites. Measurements of known salt marsh porosities were drawn from several case studies in the literature. These salt marsh porosity measurements were georeferenced so they could be compared to the expected seabed porosity determined by spatial interpolation. Initial results show that these salt marshes tend to be more porous than the benthic sediments surrounding them. This excess porosity can be an important contributor to marsh volume (i.e. elevation), and ultimately to marsh survival. Furthermore, it raises several questions about the source of this void space and the mechanism of its retention. Salt marsh volume appears to be greater than we would expect based on the sum of its parts. Therefore, predictions of salt marsh accretion may systematically underestimate void volumes and be overly pessimistic about marsh response to relative sea level rise.

  6. Impacted Mandibular Third Molars: Review of Literature and a ...

    African Journals Online (AJOL)

    Impacted Mandibular Third Molars: Review of Literature and a Proposal of a Combined ... Annals of Medical and Health Sciences Research ... has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

  7. Prediction of postoperative pain after mandibular third molar surgery

    DEFF Research Database (Denmark)

    Rudin, Asa; Eriksson, Lars; Liedholm, Rolf

    2010-01-01

    To evaluate the predictive potential of preoperative psychological and psychophysiological variables in estimating severity of postoperative pain following mandibular third molar surgery (MTMS). Methods: Following ethical committee approval and informed consent, 40 consecutive patients scheduled...

  8. Má oclusão Classe I de Angle tratada com extrações de primeiros molares permanentes Angle Class I malocclusion treated with extraction of first permanent molars

    Directory of Open Access Journals (Sweden)

    Ivan Tadeu Pinheiro da Silva

    2010-08-01

    Full Text Available A má oclusão Classe I de Angle é caracterizada por uma relação anteroposterior normal nos molares, que pode ou não estar acompanhada por alterações esqueléticas - nos planos vertical ou transverso - ou dentárias. A biprotrusão, revelada pela inclinação acentuada dos incisivos superiores e inferiores para vestibular, somada ao trespasse horizontal excessivo, faz com que o paciente fique mais exposto a traumas dentários, além de causar comprometimento estético. A escolha dos dentes a serem extraídos para a correção, geralmente, recai sobre os primeiros ou segundos pré-molares, devido à sua posição na arcada. Contudo, a extração do primeiro molar permanente, em função de algum comprometimento, por cárie ou restauração extensa, pode ser uma alternativa, proporcionando a manutenção de um dente hígido em detrimento de outro já manipulado. O presente caso, tratado de maneira incomum, pela extração dos quatro primeiros molares permanentes, foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 2, como parte dos requisitos para a obtenção do título de diplomado pelo BBO.Angle Class I malocclusion is characterized by normal anteroposterior molar relationship, which may or may not be accompanied by skeletal changes-in the vertical or transverse planes-or dental changes. Bimaxillary dental protrusion, characterized by pronounced labial inclination of maxillary and mandibular incisors combined with excessive overjet, expose patients to dental trauma and compromise aesthetics. In deciding which teeth to extract for Class I correction the first or second premolars are usually selected due to their location in the dental arch. However, the extraction of a first permanent molar compromised by caries or extensive restoration may be an alternative that ensures the preservation of a healthy tooth instead of one that has already been manipulated. This case, treated in

  9. Managing molar-incisor hypomineralization: A systematic review.

    Science.gov (United States)

    Elhennawy, Karim; Schwendicke, Falk

    2016-12-01

    We systematically reviewed treatment modalities for MIH-affected molars and incisors. Trials on humans with ≥1 MIH molar/incisor reporting on various treatments were included. Two authors independently searched and extracted records. Sample-size-weighted annual failure rates were estimated where appropriate. The risk of bias was assessed using the Newcastle-Ottawa scale. Electronic databases (PubMed, Embase, Cochrane CENTRAL, Google Scholar) were screened, and hand searches and cross-referencing performed. Fourteen (mainly observational) studies were included. Ten trials (381 participants) investigated MIH-molars, four (139) MIH-incisors. For molars, remineralization, restorative or extraction therapies had been assessed. For restorative approaches, mean (SD) annual failure rates were highest for fissure sealants (12[6]%) and glass-ionomer restorations (12[2]%), and lowest for indirect restorations (1[3]%), preformed metal crowns (1.3 [2.1]%) and composite restorations (4[3]%). Ony study assessed extraction of molars in young patients (median age 8.2 years), the majority of them without malocclusions, but third molars in development. Spontaneous alignment of second molars was more frequent in the maxilla (55%) than the mandible (47%). For incisors, desensitizing agents successfully managed hypersensitivity. Micro-abrasion and composite veneers improved aesthetics. Few, mainly moderate to high-risk-studies investigated treatment of MIH. Remineralization or sealants seem suitable for MIH-molars with limited severity and/or hypersensitivity. For severe cases, restorations with composites or indirect restorations or preformed metal crowns seem suitable. Prior to tooth extraction as last resort factors like the presence of a general malocclusion, patients' age and the status of neighboring teeth should be considered. No recommendations can be given for MIH-incisors. Dentists need to consider the specific condition of each tooth and the needs and expectations of

  10. Fusion or gemination? An unusual mandibular second molar

    Directory of Open Access Journals (Sweden)

    Angela Jordão Camargo

    2016-01-01

    Full Text Available Fusion and gemination is not an uncommon finding and affected most primary dentition and the permanent maxillary incisors. These changes can develop a series of complication. A 11-year-old male presented radiography finding: an unusual mandibular second molar. A well-documented case brings a challenge for radiologists classify between fusion and gemination. In conclusion, this alteration although common in other regions, there are no case in the literature involving “second and third” molar.

  11. Anxiety before extraction of impacted lower third molars

    OpenAIRE

    Tarazona Álvarez, Beatriz; Tarazona Álvarez, Pablo; Peñarrocha Oltra, David; Rojo Moreno, Juan; Peñarrocha Diago, María

    2015-01-01

    Objetives: Assess levels of trait anxiety, state anxiety and dental anxiety before extraction of lower third molars and check the correlation and reliability of the scales used for the measurement of preoperative anxiety. Study Design: A prospective study of patients treated with extraction of a lower third molar between September 2010 to December 2010 was carried out. A total of 125 patients were included in the study. All of them were patients of the Oral Surgery and Implantology Department...

  12. A retrospective study of sodium hypochlorite pulpotomies in primary molars

    OpenAIRE

    Li, Tzu-Ying; Chuang, Li-Chuan; Aileen I Tsai

    2016-01-01

    Background/purpose: Formocresol has been a popular pulpotomy medicament for primary molars, however, its toxicity and potential carcinogenicity leaves room for other alternatives such as sodium hypochlorite (NaOCl). The purpose of this study is to evaluate the clinical and radiographic success rate of 5% NaOCl pulpotomy in primary molars. Materials and methods: A retrospective research of patient records from January 1, 2009 and December 31, 2012 was conducted to evaluate the clinical and ...

  13. Molar Absorptivities of Ultraviolet and Visible Bands of Ozone in Aqueous Solutions

    DEFF Research Database (Denmark)

    Hart, E.J.; Sehested, Knud; Holcman, J.

    1983-01-01

    by absorbance measurements of the gas at 253.7 nm and by oxidation of FeSO4 in H2SO4 solution followed by back-titration of excess Fe2+ with KMnO4. Spectrophotometric analysis of Fe3+ was also used at low ozone concentrations. A stoichiometric ratio, Fe3+/O3, of 1.996 .+-. 0.036 was found. The visible spectrum......The molar absorptivities of aqueous ozone solutions [.epsilon.(O3)] are reported for the wavelength ranges 190-300 nm and 350-900 nm. At the maxima of these bands, .epsilon.260(O3) = 3292 .+-. 70 M-1 cm-1 and .epsilon.590(O3) = 5.1 .+-. 0.1 M-1 cm-1. The analyses for ozone were carried out...... of aqueous O3 is compared with that of ozone gas....

  14. Excessive libido in a woman with rabies.

    OpenAIRE

    Dutta, J. K.

    1996-01-01

    Rabies is endemic in India in both wildlife and humans. Human rabies kills 25,000 to 30,000 persons every year. Several types of sexual manifestations including excessive libido may develop in cases of human rabies. A laboratory proven case of rabies in an Indian woman who manifested excessive libido is presented below. She later developed hydrophobia and died.

  15. Understand Your Risk for Excessive Blood Clotting

    Science.gov (United States)

    ... Vascular Health Peripheral Artery Disease Venous Thromboembolism Aortic Aneurysm More Understand Your Risk for Excessive Blood Clotting Updated:Nov 2,2015 Many factors can lead to excessive blood clotting, leading to limited or blocked blood flow. Blood clots can travel to the arteries or ...

  16. Bladder calculus presenting as excessive masturbation.

    Science.gov (United States)

    De Alwis, A C D; Senaratne, A M R D; De Silva, S M P D; Rodrigo, V S D

    2006-09-01

    Masturbation in childhood is a normal behaviour which most commonly begins at 2 months of age, and peaks at 4 years and in adolescence. However excessive masturbation causes anxiety in parents. We describe a boy with a bladder calculus presenting as excessive masturbation.

  17. 30 CFR 57.6902 - Excessive temperatures.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Excessive temperatures. 57.6902 Section 57.6902... Requirements-Surface and Underground § 57.6902 Excessive temperatures. (a) Where heat could cause premature... shall— (1) Measure an appropriate number of blasthole temperatures in order to assess the specific mine...

  18. 30 CFR 56.6902 - Excessive temperatures.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Excessive temperatures. 56.6902 Section 56.6902... Requirements § 56.6902 Excessive temperatures. (a) Where heat could cause premature detonation, explosive... an appropriate number of blasthole temperatures in order to assess the specific mine conditions prior...

  19. Excess Based Allocation of Risk Capital

    NARCIS (Netherlands)

    van Gulick, G.; De Waegenaere, A.M.B.; Norde, H.W.

    2010-01-01

    In this paper we propose a new rule to allocate risk capital to portfolios or divisions within a firm. Specifically, we determine the capital allocation that minimizes the excesses of sets of portfolios in lexicographical sense. The excess of a set of portfolios is defined as the expected loss of

  20. The excessively crying infant : etiology and treatment

    NARCIS (Netherlands)

    Akhnikh, S.; Engelberts, A.C.; Sleuwen, B.E. van; Hoir, M.P. L’; Benninga, M.A.

    2014-01-01

    Excessive crying, often described as infantile colic, is the cause of 10% to 20% of all early pediatrician visits of infants aged 2 weeks to 3 months. Although usually benign and selflimiting, excessive crying is associated with parental exhaustion and stress. However, and underlying organic cause

  1. Triboson interpretations of the ATLAS diboson excess

    CERN Document Server

    Aguilar-Saavedra, J.A.

    2015-01-01

    The ATLAS excess in fat jet pair production is kinematically compatible with the decay of a heavy resonance into two gauge bosons plus an extra particle. This possibility would explain the absence of such a localised excess in the analogous CMS analysis of fat dijet final states, as well as the negative results of diboson resonance searches in the semi-leptonic decay modes.

  2. Ionic Asymmetry and Solvent Excluded Volume Effects on Spherical Electric Double Layers: A Density Functional Approach

    Energy Technology Data Exchange (ETDEWEB)

    Medasani, Bharat; Ovanesyan, Zaven; Thomas, Dennis G.; Sushko, Maria L.; Marucho, Marcelo

    2014-05-29

    In this article we present a classical density functional theory for electrical double layers of spherical macroions that extends the capabilities of conventional approaches by accounting for electrostatic ion correlations, size asymmetry and excluded volume effects. The approach is based on a recent approximation introduced by Hansen-Goos and Roth for the hard sphere excess free energy of inhomogeneous fluids (J. Chem. Phys. 124, 154506). It accounts for the proper and efficient description of the effects of ionic asymmetry and solvent excluded volume, especially at high ion concentrations and size asymmetry ratios including those observed in experimental studies. Additionally, we utilize a leading functional Taylor expansion approximation of the ion density profiles. In addition, we use the Mean Spherical Approximation for multi-component charged hard sphere fluids to account for the electrostatic ion correlation effects. These approximations are implemented in our theoretical formulation into a suitable decomposition of the excess free energy which plays a key role in capturing the complex interplay between charge correlations and excluded volume effects. We perform Monte Carlo simulations in various scenarios to validate the proposed approach, obtaining a good compromise between accuracy and computational cost. We use the proposed computational approach to study the effects of ion size, ion size asymmetry and solvent excluded volume on the ion profiles, integrated charge, mean electrostatic potential, and ionic coordination number around spherical macroions in various electrolyte mixtures. Our results show that both solvent hard sphere diameter and density play a dominant role in the distribution of ions around spherical macroions, mainly for experimental water molarity and size values where the counterion distribution is characterized by a tight binding to the macroion, similar to that predicted by the Stern model.

  3. Prevalence of Taurodont molars in a North Indian population.

    Science.gov (United States)

    Bharti, Ramesh; Chandra, Anil; Tikku, Aseem Prakash; Arya, Deeksha

    2015-01-01

    It is very important for dentists to be familiar with anomalies of teeth not only for the clinical complications but also their management. Taurodontism also provides a valuable clue in detecting its association with various syndromes and other systemic conditions. The purpose of this study was to assess the prevalence of Taurodont molars among a North Indian population. A total of 1000 patients' full-mouth periapical radiographs were screened. The radiographs were evaluated under optimal conditions using double magnifying glasses. A total of 7615 molars (including third molars) were evaluated. The relative incidence and the correlations regarding the location of Taurodont teeth (right versus left side and maxillary versus mandibular) were analyzed using the Chi-square test. Twenty-eight patients were found to have a Taurodont molar (11 women and 17 men [P = 0.250]). The prevalence of Taurodont molar was 2.8%. Males had a higher prevalence rate than females (3.4% vs. 2.2%, respectively). A cluster analysis of total Taurodonts in the mandible (45%) versus maxilla (55%) of both males and females combined showed a statistically significant difference (P Taurodontism is basically based on racial expression in different populations. These variations in prevalence between different populations may be due to ethnic variations. The occurrence of Taurodont molars among this Indian population was rare.

  4. Cuartos molares supernumerarios: relato de caso clínico

    Directory of Open Access Journals (Sweden)

    Daniela Nascimento Silva

    2006-04-01

    Full Text Available Los dientes supernumerarios se diagnostican mediante exámenes radiográficos de rutina, pues generalmente son asintomáticos. Los cuartos molares representan el segundo grupo de dientes supernumerarios con más frecuencias; ocurren en posición distal a los terceros molares, especialmente en el maxilar superior, y en la mayoría de casos, estos están incluidos. El objetivo de este artículo es realizar la presentación de un caso, de una mujer de 30 anos con los cuartos molares incluidos en el maxilar inferior y describir la técnica para su remoción.Supernumerary teeth are generally asymptomatic and are diagnosed by routine X-ray tests. The fourth molar teeth represent the second group of the most frequent supernumerary teeth, occur in distal position to the third molar teeth, specially in the superior maxilla and, in most of the cases, they are included. The aim of this paper is to comment on the case of a 30-year-old woman with the fourth molar teeth included in the inferior maxilla and to describe the technique used for their removal.

  5. Von Askese und anderen Exzessen Of Asceticism and Other Excesses

    Directory of Open Access Journals (Sweden)

    Sebastian Möckel

    2005-11-01

    Full Text Available Die Kulturtechnik der Askese wird in diesem detailreichen Sammelband in ihrer auf Selbstermächtigung einerseits und Selbstdisziplinierung andererseits beruhenden Ambivalenz dargestellt. Askese bringt Geschlechterordnungen hervor, kann diese aber auch unterlaufen. Die Ästhetik der Askese birgt kreatives, exzessives Potential.The cultural techniques of asceticism are portrayed in this richly detailed collected volume. The book illustrates its ambivalence based on self-empowerment on the one side and self-discipline on the other. Asceticism produces the order of gender but can also undermine this. The aesthetics of asceticism contain creative and excessive potential.

  6. Caries Management Strategies for Primary Molars

    Science.gov (United States)

    Santamaria, R.M.; Innes, N.P.T.; Machiulskiene, V.; Evans, D.J.P.; Splieth, C.H.

    2014-01-01

    Minimal invasive approaches to managing caries, such as partial caries removal techniques, are showing increasing evidence of improved outcomes over the conventional complete caries removal. There is also increasing interest in techniques where no caries is removed. We present the 1-yr results of clinical efficacy for 3 caries management options for occlusoproximal cavitated lesions in primary molars: conventional restorations (CR; complete caries removal and compomer restoration), Hall technique (HT; no caries removal, sealing in with stainless steel crowns), and nonrestorative caries treatment (NRCT; no caries removal, opening up the cavity, teaching brushing and fluoride application). In sum, 169 children (3-8 yr old; mean, 5.56 ± 1.45 yr) were enrolled in this secondary care–based, 3-arm, parallel-group, randomized clinical trial. Treatments were carried out by specialist pediatric dentists or postgraduate trainees. One lesion per child received CR, HT, or NRCT. Outcome measures were clinical failure rates, grouped as minor failure (restoration loss/need for replacement, reversible pulpitis, caries progression, etc.) and major failure (irreversible pulpitis, abscess, etc.). There were 148 children (87.6%) with a minimum follow-up of 11 mo (mean, 12.23 ± 0.98 mo). Twenty teeth were recorded as having at least 1 minor failure: NRCT, n = 8 (5%); CR, n = 11 (7%); HT, n = 1 (1%) (p = .002, 95% CI = 0.001 to 0.003). Only the comparison between NRCT and CR showed no significant difference (p = .79, 95% CI = 0.78 to 0.80). Nine (6%) experienced at least 1 major failure: NRCT, n = 4 (2%); CR, n = 5 (3%); HT, n = 0 (0%) (p = .002, 95% CI = 0.001 to 0.003). Individual comparison of NRCT and CR showed no statistically significant difference in major failures (p = .75, 95% CI = 0.73 to 0.76). Success and failure rates were not significantly affected by pediatric dentists’ level of experience (p = .13, 95% CI = 0.12 to 0.14). The HT was significantly more successful

  7. Prevalence of missing and impacted third molars in adults aged 25 years and above

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yun Hoa; Cho, Bong Hae [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Yansan (Korea, Republic of)

    2013-12-15

    The purpose of this study was to determine the prevalence of missing and impacted third molars in people aged 25 years and above. The study sample of 3,799 patients was chosen randomly from patients who visited Pusan National University Dental Hospital and had panoramic radiographs taken. The data collected included presence and impaction state, angulation, and depth of impaction of third molars, and radiographically detected lesions of third molars and adjacent second molars. A greater percentage of men than women retained at least one third molar. The incidence of third molars decreased with increasing age. The incidence of partially impacted third molars greatly declined after the age of 30. Vertically impacted maxillary third molars and horizontally impacted mandibular third molars were most frequent in all age groups. Among the maxillary third molars, those impacted below the cervical line of the second molar were most frequent in all age groups, and among the mandibular third molars, deeply impacted third molars were most frequent in those aged over 40. Dental caries was the most common radiographic lesion of the third molars. Mesioangularly impacted third molars showed radiographic lesions in 13 (9.5%) adjacent maxillary second molars and 117 (27.4%) mandibular second molars. The number of remaining third molars decreased and the percentage of Class C depth increased with age. Caries was the most frequent lesion in third molars. Partially impacted mesioangular third molars showed a high incidence of caries or periodontal bone loss of the adjacent second molar. Regular oral examination will be essential to keep asymptomatic third molars in good health.

  8. Selenium and mercury molar ratios in commercial fish from New Jersey and Illinois: Variation within species and relevance to risk communication

    Science.gov (United States)

    Burger, Joanna; Gochfeld, Michael

    2015-01-01

    There is an emerging consensus that people consuming large amounts of fish with selenium:mercury ratios below 1 may be at higher risk from mercury toxicity. As the relative amount of selenium increases compared to mercury, risk may be lowered, but it is unclear how much excess selenium is required. It would be useful if the selenium:mercury ratio was relatively consistent within a species, but this has not been the case in our studies of wild-caught fish. Since most people in developed countries and urban areas obtain their fish and other seafood commercially, we examined selenium:mercury molar ratios in commercial fish purchased in stores and fish markets in central New Jersey and Chicago. There was substantial interspecific and intraspecific variation in molar ratios. Across species the selenium:mercury molar ratio decreased with increasing mean mercury levels, but selenium variation also contributed to the ratio. Few samples had selenium:mercury molar ratios below 1, but there was a wide range in ratios, complicating the interpretation for use in risk management and communication. Before ratios can be used in risk management, more information is needed on mercury:selenium interactions and mutual bioavailability, and on the relationship between molar ratios and health outcomes. Further, people who are selenium deficient may be more at risk from mercury toxicity than others. PMID:23541437

  9. Two-year follow-up of indirect posterior composite restorations of permanent teeth with excessive material loss in pediatric patients: a clinical study.

    Science.gov (United States)

    Koyuturk, Alp Erdin; Ozmen, Bilal; Tokay, Ugur; Tuloglu, Nuray; Sari, M Erhan; Sonmez, T Taha

    2013-12-01

    To evaluate the clinical effectiveness of indirect composite restorations in permanent molars with excessive substance loss in pediatric patients who have undergone root canal treatments. Molars of 29 pediatric patients underwent endodontic treatment. Sixteen molars were restored with an indirect posterior composite resin restoration and 13 molars were restored with a direct posterior composite resin restoration. The success of the restorations was evaluated for 2 years based on United States Public Health Service (USPHS) criteria, photographs after staining with basic fuchsine, and radiographic data. Data obtained from both groups were compared using the Mann-Whitney U-test and Wilcoxon signed rank test. Evaluation of the clinical and radiographic data revealed no observable, statistically significant differences between the posterior and the indirect posterior composites (p > 0.05). However, evaluation of photos taken of the patients' molars after staining with basic fuchsin revealed that direct posterior composites showed increased staining on the margins of the restorations after six months (p restoring endodontically treated permanent teeth with excessive substance loss in child patients, indirect restorations may be seen as a better option.

  10. Standard molar Gibbs free energy and enthalpy of solvation of low polar solutes in formamide derivatives at 298 K

    Energy Technology Data Exchange (ETDEWEB)

    Sedov, I.A., E-mail: igor_sedov@inbox.ru; Magsumov, T.I.; Stolov, M.A.; Solomonov, B.N.

    2016-01-10

    Highlights: • Standard molar enthalpies of solution of low polar solutes in NMF were measured. • Limiting activity coefficients in NMF were measured. • The solvophobic effects are present but weaker in NMF than in formamide. • We can tune the solvophobic effects by mixing NMF or formamide with other solvents. - Abstract: Novel experimental values of the limiting activity coefficients and standard molar enthalpies of solution in N-methylformamide at 298.15 K are reported and used to calculate the thermodynamic functions of solvation. We compare the plots of the standard molar Gibbs free energy against the standard molar enthalpy of solvation of low polar molecules in N-methylformamide, N,N-dimethylformamide, and formamide. The solvophobic effect is responsible for the deviations of the data points from the straight line corresponding to a correlation between thermodynamic functions of solvation in aprotic solvents. It is shown that the solvophobic effects are strong in formamide solutions, significantly weaker in N-methylformamide, and very weak in N,N-dimethylformamide, which coincides with the average number of intermolecular hydrogen bonds per unit volume of these solvents. Behavior of solutions in binary solvents composed of N-methylformamide or formamide mixed with water and ethylene glycol and a possibility to tune the solvophobic effect by changing the solvent composition are also considered.

  11. Orthodontic Replacement of Lost Permanent Molar with Neighbor Molar: A Six-Year Follow-Up

    Directory of Open Access Journals (Sweden)

    Taisa Boamorte Raveli

    2017-01-01

    Full Text Available Extraction is very frequent indication in orthodontic planning, especially when there are crowding, biprotrusion, and aesthetically unpleasant profiles. Next to extraction comes space closure, which represents a challenge for orthodontists because of extended treatment time, discomfort created for the patient, tissue tolerance, and stability concerns. When it comes to what mechanics to choose for space closure, loops present two major advantages in relation to sliding mechanics: absence of abrasion and possibility to reach pure dental translation. A case is presented where an adult female patient with early loss of the first lower permanent molars, minor lower crowding, and tooth biprotrusion was treated with upper first bicuspids extraction along with upper and lower space closure done with T-loops to promote best space closure control in order to correct the malocclusion and enhance facial aesthetics.

  12. 26 CFR 54.4979-1 - Excise tax on certain excess contributions and excess aggregate contributions.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 17 2010-04-01 2010-04-01 false Excise tax on certain excess contributions and excess aggregate contributions. 54.4979-1 Section 54.4979-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) MISCELLANEOUS EXCISE TAXES (CONTINUED) PENSION EXCISE TAXES § 54.4979-1 Excise tax on certain excess...

  13. Pattern of third molar impaction in a Saudi population

    Directory of Open Access Journals (Sweden)

    Ali H Hassan

    2010-10-01

    Full Text Available Ali H Hassan11Department of Preventive Dental Sciences, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi ArabiaObjective: To evaluate the current pattern of third molar impaction in a sample of Saudi patients.Methods: One thousand thirty-nine orthopantomograms (OPG of patients ranging in age from 19 to 46 years (536 males and 503 females were evaluated to determine the frequency of impacted third molars, their levels of eruption, and their angulations.Results: Four hundred twenty-two (40.5% of the 1039 OPG showed at least one impacted third molar, with no significant difference between males (222; 52.6% and females (200; 47.4% (P = 0.284. The most common number of impacted third molars per OPG was one (72.5%. Impacted third molars were 1.64 times more likely to occur in the mandible than in the maxilla. The most common angulation of impaction in the mandible was the mesial (33.4%, while the most common angulation in the maxilla, was the vertical (49.6%. Level B impaction was the most common in both maxilla (48.2% and mandible (67.7%. There was no significant difference in the frequency of impaction between the right and left sides in both jaws.Conclusion: The pattern of third molar impaction in the western region of Saudi Arabia is characterized by a high prevalence of impaction that is greater in the mandibles and with no sex predilection.Keywords: third molar, impaction, prevalence, Saudi 

  14. Predictors of excessive use of social media and excessive online gaming in Czech teenagers.

    Science.gov (United States)

    Spilková, Jana; Chomynová, Pavla; Csémy, Ladislav

    2017-12-01

    Background and aims Young people's involvement in online gaming and the use of social media are increasing rapidly, resulting in a high number of excessive Internet users in recent years. The objective of this paper is to analyze the situation of excessive Internet use among adolescents in the Czech Republic and to reveal determinants of excessive use of social media and excessive online gaming. Methods Data from secondary school students (N = 4,887) were collected within the 2015 European School Survey Project on Alcohol and Other Drugs. Logistic regression models were constructed to describe the individual and familial discriminative factors and the impact of the health risk behavior of (a) excessive users of social media and (b) excessive players of online games. Results The models confirmed important gender-specific distinctions - while girls are more prone to online communication and social media use, online gaming is far more prevalent among boys. The analysis did not indicate an influence of family composition on both the excessive use of social media and on excessive online gaming, and only marginal effects for the type of school attended. We found a connection between the excessive use of social media and binge drinking and an inverse relation between excessive online gaming and daily smoking. Discussion and conclusion The non-existence of significant associations between family environment and excessive Internet use confirmed the general, widespread of this phenomenon across the social and economic strata of the teenage population, indicating a need for further studies on the topic.

  15. Explaining CMS lepton excesses with supersymmetry

    CERN Multimedia

    CERN. Geneva; Prof. Allanach, Benjamin

    2014-01-01

    1) Kostas Theofilatos will give an introduction to CMS result 2) Ben Allanach: Several CMS analyses involving di-leptons have recently reported small 2.4-2.8 sigma local excesses: nothing to get too excited about, but worth keeping an eye on nonetheless. In particular, a search in the $lljj p_T$(miss) channel, a search for $W_R$ in the $lljj$ channel and a di-leptoquark search in the $lljj$ channel and $ljj p_T$(miss) channel have all yielded small excesses. We interpret the first excess in the MSSM, showing that the interpretation is viable in terms of other constraints, despite only having squark masses of around 1 TeV. We can explain the last three excesses with a single R-parity violating coupling that predicts a non-zero contribution to the neutrinoless double beta decay rate.

  16. Genetics Home Reference: aromatase excess syndrome

    Science.gov (United States)

    ... Ogata T. Genomic basis of aromatase excess syndrome: recombination- and replication-mediated rearrangements leading to CYP19A1 overexpression. ... 2013 Oct 18. Citation on PubMed More from Genetics Home Reference Bulletins Rare Disease Day 2018 Darwin ...

  17. Prevention of modern teenager's computer excessive gambling

    OpenAIRE

    Shamsutdinova, D.

    2011-01-01

    This article is devoted to the prevention of young people's excessive gambling. The article organized and convincingly derived the prevention strategies dependent gaming behavior among young people and teenagers.

  18. Excessive deforestation of Gishwati Mountainous forest ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    sigp1. Excessive deforestation of Gishwati. Mountainous forest & biodiversity changes. Introduction. The Change in Forest cover in. Rwanda is result of the high growth of population density. The latter has doubled between 1978 and 2002. Over.

  19. Uterine rupture following incomplete molar pregnancy: a case report

    Directory of Open Access Journals (Sweden)

    Pourali L

    2013-03-01

    Full Text Available Background: In molar pregnancy, when hydatidiform changes are local and some embryonic components are observed, the term of partial mole is used. The risk of persistent trophoblastic tumor after partial mole is much lower than complete mole. In this persistent cases almost all are non metastatic. The aim of this study is to report a case of uterine rupture following incomplete molar pregnancy.Case presentation: The patient was a 26 year old woman with obstetric history of an abortion and one molar pregnancy and no child. She was referred to emergency unit in Ghaem University Hospital, Mashhad, Iran in May 2011. She had an evacuation curettage following molar pregnancy three months before and without any follow up visit. The patient was referred to emergency unit with hemorrhagic shock. She immediately underwent laparotomy. The uterine fundal rupture was repaired and evacuation curettage performed. In post operative evaluation, she had a nine millimeter metastatic nodule in base of right Lung. As a patient in low risk stage III, she received weekly intramuscular methotrexate (40mg/m2 for six courses. In follow up visit -hCG titer was negative (<10miu/ml at 5th week. Conclusion: In cases of in complete molar pregnancy risk of metastasis is very low. Serial beta-hCG titer is the most accurate method for detection of persistent gestational trophoblastic disease (GTN. In neglected cases like this case preservation of ruptured uterus in GTN is possible.

  20. Histopathologic Evaluation of Follicular Tissues Associated with Impacted Third Molars

    Directory of Open Access Journals (Sweden)

    M. Khorasani

    2008-06-01

    Full Text Available Objective: The aim of the present study was to histopathologically evaluate follicular tissues of third molars with pericoronal radiolucenciesof less than 2 millimeters.Materials and Methods: In this descriptive analytic study, 100 impacted third molars with normal follicular spaces were removed and their pericoronaltissues submitted for histopathologic examination. Different characteristicsof the epithelium and connective tissue were evaluated in all cases. Statisti-cal analysis was performed using chi square and Mann-Whitney tests.Results: In our study sample, 74% of the patients were female and 26% were male, ranging in age from 13 to 54 years (mean, 25.3 years. Lining epithelium was observed in 69% of the specimens of which 31%, 23% and 14% was cuboidal, squamous and columnar, respectively. A significant re-lationship was found between the presence of squamous epithelium and pa-tient age (P<0.05. Nonspecific chronic inflammation was the only patho-logic finding observed in 44% of the specimens. Inflammation was signifi-cantly associated with age and squamous metaplasia (P<0.05.Conclusion: Considering that pathologic lesions were not observed in anyof the studied cases, unerupted third molars should not be removed unless there is a clinical indication to do so, or in case the impacted molar shows evidence of pathological changes. Follow-up is suggested for asympto-matic impacted third molars.

  1. Prevalence of Taurodont Molars in a Selected Iranian Adult Population.

    Science.gov (United States)

    Jamshidi, Davoud; Tofangchiha, Maryam; Jafari Pozve, Nasim; Mohammadpour, Mahdis; Nouri, Bijan; Hosseinzadeh, Kazem

    2017-01-01

    Taurodontism is an anomaly characterized by elongated crowns and consumedly apical location of the bifurcation area. This study aimed to determine the prevalence of taurodontism in molars based on digital panoramic radiographies in eight cities of Iran. This descriptive cross-sectional study was conducted on 2360 digital panoramic radiographs taken for different treatment purposes. Demographic information of patients was recorded and radiographs were evaluated for presence of taurodont molars. The prevalence rates were calculated and the data were analyzed using SPSS software version 18 via paired t-test, chi square test and ANOVA. A total of 2360 panoramic radiographs (from 51.4% male and 48.6% female patients) were evaluated and the prevalence of taurodontism was reported 22.9% (22.6% in males and 23.3% in females) (P>0.05). Its prevalence was 51.67% in the right and 48.33% in the left quadrants (P>0.05), 34.1% in the mandible and 65.9% in the maxilla (P=0.000) and 79.52% in the second and 20.48% in the first molar (P=0.000). The prevalence of hypotaurodontism, mesotaurodontism and hypertaurodontism was 84.13%, 11.07% and 4.8%, respectively. The prevalence of taurodont molars was high in Iran and it was more common in the second molars and in the maxilla. Hypotaurodontism had the highest prevalence.

  2. Phospholipids as Biomarkers for Excessive Alcohol Use

    Science.gov (United States)

    2017-03-01

    of SM and LPC and the amount of alcohol consumption during the past month. The proposal has both scientific and practical significance in... alcohol use (EAU). Drinking becomes excessive when it causes or elevates the risk for alcohol -related problems or complicates the management of other...the quantity of alcohol consumption during the past month. 2. KEYWORDS: Excessive alcohol use, lipidomics, timeline follow back 3. ACCOMPLISHMENTS

  3. Romanian welfare state between excess and failure

    Directory of Open Access Journals (Sweden)

    Cristina Ciuraru-Andrica

    2012-12-01

    Full Text Available Timely or not, our issue can bring back to life some prolific discussions, sometimes diametrical. We strike the social assistance, where, at this moment, is still uncertain if, once unleashed the excess, the failure will come inevitably or there is a “Salvation Ark”. However, the difference between the excess and the failure of the welfare state is almost intangible, the reason of his potential failure being actually the abuses made until the start of depression.

  4. Organizational Inertia and Excessive Product Proliferation

    OpenAIRE

    Sakuraki, Rie

    2015-01-01

    This study investigates the internal factors of excessive product proliferation. Since empirical literature on product over-proliferation focused on how to optimize existing product portfolio, the causes of excessive product proliferation have so far attracted little attention. This study employs a case study of Shiseido, a famous Japanese cosmetics company, with particular attention to product proliferation in the Shiseido chain store channel, because external factors are mostly absent from ...

  5. External root resorption of the second molar associated with third molar impaction: comparison of panoramic radiography and cone beam computed tomography.

    Science.gov (United States)

    Oenning, Anne Caroline Costa; Neves, Frederico Sampaio; Alencar, Phillipe Nogueira Barbosa; Prado, Rodrigo Freire; Groppo, Francisco Carlos; Haiter-Neto, Francisco

    2014-08-01

    The aim of the present study was to compare panoramic radiography and cone beam computed tomography (CBCT) for the assessment of external root resorption (ERR) of second molars associated with impacted third molars. In addition, the prevalence of ERR in second molars and the inclinations of the third molars more associated with ERR were investigated in both imaging methods. The sample consisted of 66 individuals with maxillary and mandibular impacted third molars (n = 188) seen on panoramic radiographs and CBCT images. The presence of ERR on the adjacent second molar was investigated, and the position of the third molar was determined using Winter's classification (vertical, horizontal, mesioangular, distoangular, and transverse). Statistical analysis was performed using the χ(2) test, Fisher exact test, and 2-proportion Z test (the significance level was set at 5%). A significantly greater number of cases of ERR (P third molars in mesioangular and horizontal inclinations were more likely to cause resorption of the adjacent teeth. CBCT should be indicated for the diagnosis of ERR in second molars when direct contact between the mandibular second and third molars has been observed on panoramic radiographs, especially in mesioangular or horizontal impactions. Furthermore, considering the propensity of these teeth to cause ERR in second molars, third molar prophylactic extraction could be suggested. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  6. La hiperdontia en región de molares Hyperdontia in molar region

    Directory of Open Access Journals (Sweden)

    George Táccio de Miranda Candeiro

    2011-12-01

    Full Text Available La hiperdontia constituye una de las anomalías más estudiadas de la dentición humana. Esa alteración representa la aparición de uno o más dientes en cantidades mayores de lo normal, que puede ocurrir en la mandíbula o maxila y de manera unilateral o bilateral. La etiología de los dientes supernumerarios puede ser explicada principalmente por hiperactividad de la lámina dentaria en la fase inicial. Es importante la detección precoz de dientes supernumerarios porque se ha visto una serie de complicaciones como los diastemas, que pueden causar en la cavidad bucal: retardo de la erupción o dientes impactados, posicionamiento inadecuado de dientes permanentes, desajuste oclusal y el desarrollo de quistes y tumores odontógenos. Así el diagnóstico es normalmente realizado a partir de un examen radiográfico convencional, principalmente la radiografía panorámica. Este trabajo tuvo como objetivo relatar 4 casos clínicos de pacientes con presencia de molares supernumerarios, que fueron atendidos en el Servicio de Radiología de la Escuela de Odontología de la Universidad Federal de Ceará.Hyperdontia is one of the more studied anomalies of human dentition. This alteration represents the appearance of one or more teeth in a number greater of normal, occurring in mandible or in maxilla and could be unilateral or bilateral. The etiology of supernumerary teeth may be explained mainly due to the hyperactivity of dental plate in its initial phase; its early detection is important because of there have been a series of complications that may to cause diastemata, eruption retard or impacted teeth, inappropriate positioning of permanent teeth, occlusal misalignment and the development of odontogenic cysts or tumors. Thus, the diagnosis is normally made from a conventional radiographic examination, mainly the panoramic X-ray. The objective of present paper is the present four clinical cases of patients presenting with supernumerary molars, seen in

  7. Variation in buccal surface morphology of deciduous first molars

    Directory of Open Access Journals (Sweden)

    M Simratvir

    2012-01-01

    Full Text Available Background: The buccal bulge of the deciduous first molars has always been a restorative challenge to the pediatric dentist. Morphologically it may vary from a slight prominence to a well-developed cusp-like structure. Aim: This study was conducted to determine the variable buccal surface morphology of deciduous first molar and its clinical relevance. Materials and Methods: A prospective study was conducted whereby 2016 patients visiting the outpatient clinic of dental hospital over 1 year were evaluated. Any variation in buccal surface morphology of the deciduous first molars was recorded photographically or by replicating in dental stone. Results: Varied morphological patterns on buccal surface were observed for which a new classification scheme has been proposed. Conclusion: The surface morphology of deciduous teeth crowns must be studied carefully as it may be indicative of pulpal extensions and accessory roots, requiring consideration during restorative treatment planning.

  8. Pendulum Therapy of Molar Distalization in Mixed Dentition.

    Science.gov (United States)

    Patil, Raju Umaji; Prakash, Amit; Agarwal, Anshu

    2016-01-01

    Early and timely pedo-orthodontic treatment is aimed at eliminating the disturbances of skeletal or dentoalveolar development, to harmonize the stomatognathic system before the full eruption of all permanent teeth. The advantages of pendulum appliance are its minimal dependence on patient's compliance (child cooperation), ease of fabrication, onetime activation and adjustment of the springs if necessary to correct minor transverse and vertical molar positions. This article reports a successful treatment method of class II malocclusion with pendulum appliance in mixed dentition phase. Distalization of maxillary molar was done, followed by guidance of canine impaction orthodontically and other dental correction using 0.022 MBT appliances. Posttreatment results were stable and remarkable. How to cite this article: Patil RU, Prakash A, Agarwal A. Pendulum Therapy of Molar Distalization in Mixed Dentition. Int J Clin Pediatr Dent 2016;9(1):67-73.

  9. Anxiety and extraction of third molars in Turkish patients.

    Science.gov (United States)

    Garip, Hasan; Abali, Osman; Göker, Kamil; Göktürk, Ulkü; Garip, Yildiz

    2004-12-01

    Preoperative anxiety is widespread and adversely affects a patient's physical and psychological outcome. Extraction of third molars is common, and many patients complain of anxiety and emotional disturbance. We assessed the anxiety of patients in Turkey before extraction of third molars. A total of 120 patients were admitted for removal of one or more third molars under local anaesthesia. The Amsterdam Preoperative Anxiety and Information Scale (APAIS) and Spielberger's State Trait Anxiety Inventory (STAI) were used to evaluate anxiety. The results showed that women were significantly more anxious than men; women who had not had a previous operation were more anxious than other women; there was no difference in the anxiety scores of patients who had previously had a local anaesthetic and those who had not; there were no differences in anxiety as measured by trait scores; patients who wanted a lot of information were more anxious.

  10. Microbiology of the pericoronal pouch in mandibular third molar pericoronitis.

    Science.gov (United States)

    Leung, W K; Theilade, E; Comfort, M B; Lim, P L

    1993-10-01

    The microorganisms associated with mandibular third molar pericoronitis were investigated using direct microscopy and anaerobic culture method. The pericoronal pouch was sampled with paper points in A) 8 patients without mandibular third molar pericoronitis and B) 6 patients with mandibular third molar pericoronitis. Under the microscope, the microflora was found to be a complex mixture comprising gram-positive and gram-negative cocci, rods and filaments (including fusiform and curved rods), motile rods and spirochetes. Significantly higher proportions of motile, gram-negative rods were found in group B than in group A. The predominant cultivable microflora of 9 samples: A (4) and B (5) comprised several species of facultative and obligate anaerobic bacteria, namely Peptostreptococcus, Streptococcus, Actinomyces, Eubacterium, Propionibacterium, Veillonella, Porphyromonas, Prevotella, Bacteriodes, Fusobacterium, Campylobacter, Staphylococcus, Stomatococcus, Lactobacillus, Neisseria, Capnocytophaga, Haemophilus, Selenomonas and Centipeda species. The microflora in pericoronitis appeared similar to that of diseased periodontal pockets.

  11. COMPLICATIONS AFTER EXTRACTION OF IMPACTED THIRD MOLARS - LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    Elitsa G. Deliverska

    2016-07-01

    Full Text Available Third molar surgery is the most common procedure performed by oral and maxillofacial surgeons worldwide. This article addresses the incidence of specific complications and, where possible, offers a preventive or management strategy. Complications, such as pain, dry socket, swelling, paresthesia of the lingual or inferior alveolar nerve, bleeding, and infection are most common. Factors thought to influence the incidence of complications after third molar removal include age, gender, medical history, oral contraceptives, presence of pericoronitis, poor oral hygiene, smoking, type of impaction, relationship of third molar to the inferior alveolar nerve, surgical time, surgical technique, surgeon experience, use of perioperative antibiotics, use of topical antiseptics, use of intra-socket medications, and anaesthetic technique. For the general dental practitioner, as well as the oral and maxillofacial surgeon, it is important to be familiar with all the possible complications after this procedure. This improves patient education and leads to prevention, early recognition and management.

  12. Solution viscosity – molar mass relationships for poly(butylene succinate and discussion on molar mass analysis

    Directory of Open Access Journals (Sweden)

    Q. Charlier

    2015-05-01

    Full Text Available Poly(butylene succinate (PBS is currently developing due to its biodegradability and the similarity of its mechanical properties to those of polyolefins. Relationships between the number average molar mass, Mn, and solution viscosity such as [η] and ηred were derived for this aliphatic polyester. Mn values were determined by end-group analysis and size exclusion chromatography (SEC. Mark-Houwink-Sakurada (MHS parameters were proposed in two solvents and for the different molar masses and viscosity measurement methods. As an example, the MHS equations were respectively, [η] =6.4•10–4•Mn0.67 in chloroform and [η] = 7.1•10–4•Mn0.69 in 50/50 wt% 1,2-dichlorobenzene/phenol at 25°C for molar masses measured by SEC in hexafluoro isopropanol (HFIP with poly(methyl methacrylate (PMMA standards. Empirical relationships were also suggested to derive Mn directly from reduced viscosity, ηred, which is much easier to determine than intrinsic viscosity. With these data, the number average molar mass of PBS can be conveniently estimated from a single viscosity measurement. In addition, it was shown that PBS contains 1–2 wt% of cyclic oligomers produced during esterification and that molar masses determined by taking this fraction into account or not were significantly different, especially for long chains.

  13. Piezoelectric Versus Conventional Rotary Techniques for Impacted Third Molar Extraction

    Science.gov (United States)

    Jiang, Qian; Qiu, Yating; Yang, Chi; Yang, Jingyun; Chen, Minjie; Zhang, Zhiyuan

    2015-01-01

    Abstract Impacted third molars are frequently encountered in clinical work. Surgical removal of impacted third molars is often required to prevent clinical symptoms. Traditional rotary cutting instruments are potentially injurious, and piezosurgery, as a new osteotomy technique, has been introduced in oral and maxillofacial surgery. No consistent conclusion has been reached regarding whether this new technique is associated with fewer or less severe postoperative sequelae after third molar extraction. The aim of this study was to compare piezosurgery with rotary osteotomy techniques, with regard to surgery time and the severity of postoperative sequelae, including pain, swelling, and trismus. We conducted a systematic literature search in the Cochrane Library, PubMed, Embase, and Google Scholar. The eligibility criteria of this study included the following: the patients were clearly diagnosed as having impacted mandibular third molars; the patients underwent piezosurgery osteotomy, and in the control group rotary osteotomy techniques, for removing impacted third molars; the outcomes of interest include surgery time, trismus, swelling or pain; the studies are randomized controlled trials. We used random-effects models to calculate the difference in the outcomes, and the corresponding 95% confidence interval. We calculated the weighted mean difference if the trials used the same measurement, and a standardized mean difference if otherwise. A total of seven studies met the eligibility criteria and were included in our analysis. Compared with rotary osteotomy, patients undergoing piezosurgery experienced longer surgery time (mean difference 4.13 minutes, 95% confidence interval 2.75–5.52, P trismus in the piezosurgery groups. The number of included randomized controlled trials and the sample size of each trial were relatively small, double blinding was not possible, and cost analysis was unavailable due to a lack of data. Our meta-analysis indicates that although

  14. Treatment of Ectopic Mandibular Second Permanent Molar with Elastic Separators

    Directory of Open Access Journals (Sweden)

    R. Rajesh

    2014-01-01

    Full Text Available Ectopic eruption is a developmental disturbance in which the tooth fails to follow its normal eruption pathway. Ectopic eruption of the second molar is relatively rare. This paper presents the case of thirteen-year-old male with an ectopic mandibular second permanent molar. The condition was corrected with surgical exposure and placement of elastic separators. This case report lays emphasis on the practice of basic methods to obtain acceptable results rather than extensive surgical or orthodontic corrections. It is advised that ectopic teeth should not be neglected especially when it concerns developing caries and malocclusion.

  15. Partial molar quantity of an intensive mother function

    Science.gov (United States)

    Koga, Yoshikata

    2012-09-01

    A new formal definition is given to the partial molar quantity of a component i for an intensive mother function. We perturb the entire system by increasing the amount of the target component by δni keeping others constant and measure the response of the system in terms of an intensive mother function, Φ, δΦ. We then define its partial molar quantity of the ith component, ϕi, as ϕi = [δΦ/{δni/(N + δni)

  16. First molar health status in different craniofacial relationships

    Directory of Open Access Journals (Sweden)

    Linjawi AI

    2016-07-01

    Full Text Available Amal I Linjawi Department of Orthodontics, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia Objective: To investigate the association between the health status of permanent first molars and different craniofacial relationships among adolescents. Study design: This is a retrospective study on patients’ records aged 11–15 years. Sex, skeletal relationship, vertical growth pattern, malocclusion, overjet, and overbite were assessed. The health status of permanent first molars was recorded from the orthopantomograms and intraoral photographs as “sound” and “not sound”. Chi-square, Mann–Whitney U and Kruskal–Wallis tests, and Pearson’s correlation coefficient were used to analyze and correlate the assessed variables. Significance level was set at P<0.05. Results: A total of 210 records were evaluated; 81 were male, 68 had Class I and 91 had Class II skeletal relationships. More than half of the subjects had normal (n=67 to moderate deep bite (n=72; normal (n=91, moderately increased (n=54, to severely increased (n=50 overjet; and Class I (n=106 and Class II division 1 (n=75 malocclusion. Significant differences were found in the health status of the permanent first molars with respect to sex (P=0.034, vertical growth pattern (P=0.01, and overbite (P=0.047. Strong correlations were only found between the health status of the permanent first molars and the following variables: sex (P=0.036 and vertical growth pattern (P=0.004. Significant correlation was further found between the upper left first molar health status and sex (P=0.019 and the lower right first molar health status and the vertical growth pattern (P=0.001. No significant association was found with the anteroposterior craniofacial relationships (P>0.05. Conclusion: Sex difference and vertical growth patterns were found to be potential predictors of the health status of the permanent first molars. No significant association was found with the

  17. Special Contribution: Third Molar Clinical Trials Annotated Bibliography.

    Science.gov (United States)

    White, Raymond P; Fisher, Elda L; Magraw, Caitlin B L; Phero, James; Abdelbaky, Omar; Sherwood, Colin; Nelson, Blake

    2016-01-01

    To provide clinicians with an annotated bibliography of published articles from research funded externally by the Oral and Maxillofacial Surgery Foundation, spanning 1996 to 2015, addressing the topic of third molar management. A brief summary for each article was generated by the respective authors. The complete annotated bibliography generated by the authors is included in the Appendix. The annotated bibliography provides clinicians and other interested individuals with a summary of current literature emanating from clinical studies on third molar topics. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  18. Patient's perception on mini-screws used for molar distalization

    OpenAIRE

    Blaya, Micéli Guimarães; Blaya, Diego Segatto; Guimarães, Magáli Beck; Hirakata, Luciana M.; Marquezan, Marcela

    2010-01-01

    PURPOSE: The objective of this study was to evaluate and compare the perceived pain intensity, side effects and discomfort related to the moment of placement, during mechanics and removal of a mini-screw for molar distalization in orthodontic treatment. METHODS: The sample consisted of 30 adult patients with a mean age of 30 years old, with class II malocclusion subdivision right or left. A mini-screw was installed in each patient, in the maxillary arch to provide a molar distalization. The p...

  19. [What nosographic framework for excessive tanning?].

    Science.gov (United States)

    Petit, A; Karila, L; Lejoyeux, M

    2014-04-01

    Socially valorised tanning, like other forms of behaviour, can take on an addictive aspect. Excessive tanning, defined by the presence of impulsivity and repetition of tanning that leads to personal distress, is a psychiatric disorder that has only recently been recognized. This finding is based on the observations of many dermatologists who report an addictive relationship in their patients with tanning cabins despite announcement of the diagnosis of malignant melanoma. This article attempts to synthesize the existing literature on excessive tanning and addiction to investigate possible associations. This review focuses on the prevalence, clinical features, aetiology, and treatment of this disorder. The literature review was conducted from 1983 to 2012, using PubMed, Google Scholar, EMBASE, and PsycInfo, using the following keywords alone or combined: Tanning, Addiction, Sunbeds, Skin cancer prevention, and Treatment. We investigated different models to determine how excessive tanning met these criteria. Excessive Tanning was described in the 2000s by an American dermatologist, Carolyn Heckman. Wartham et al. were the first to have proposed a theoretical framework for addiction to sunbathing, as well as two scales (m CAGE and m DSM IV) for the diagnosis and to assess the degree of addiction. These diagnostic criteria describe the craving like-symptoms, the feeling of losing control, or the continuation of the behavior despite knowledge of negative consequences. Excessive Tanning is not present in the classifications of the DSM or ICD, but may be related to Addiction, Obsessive-Compulsive Disorder, Impulse control disorders, Anorexia, or Body Dysmorphic Disorder. Excessive tanning can be included in the spectrum of behavioural addictions due its clinical characteristics in common with classics addictive disorders. They are a variety of other models, which may offer an explanation for or insight into tanning behaviour. Further studies must be controlled, notably on

  20. Antidepressant induced excessive yawning and indifference

    Directory of Open Access Journals (Sweden)

    Bruno Palazzo Nazar

    2015-03-01

    Full Text Available Introduction Antidepressant induced excessive yawning has been described as a possible side effect of pharmacotherapy. A syndrome of indifference has also been described as another possible side effect. The frequency of those phenomena and their physiopathology are unknown. They are both considered benign and reversible after antidepressant discontinuation but severe cases with complications as temporomandibular lesions, have been described. Methods We report two unprecedented cases in which excessive yawning and indifference occurred simultaneously as side effects of antidepressant therapy, discussing possible physiopathological mechanisms for this co-occurrence. Case 1: A male patient presented excessive yawning (approximately 80/day and apathy after venlafaxine XR treatment. Symptoms reduced after a switch to escitalopram, with a reduction to 50 yawns/day. Case 2: A female patient presented excessive yawning (approximately 25/day and inability to react to environmental stressors with desvenlafaxine. Conclusion Induction of indifference and excessive yawning may be modulated by serotonergic and noradrenergic mechanisms. One proposal to unify these side effects would be enhancement of serotonin in midbrain, especially paraventricular and raphe nucleus.

  1. Excess vibrational modes of a crystal in an external non-affine field

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 129; Issue 7. Excess vibrational ... While the former couples to external stress with familiar consequences, the response of a crystal when nonaffine displacements are enhanced using the thermodynamically conjugate field, is relatively less studied. We examine this ...

  2. [Half-molar sodium-lactate: The osmotic agent we are looking for?].

    Science.gov (United States)

    Aramendi, I; Manzanares, W; Biestro, A

    2016-03-01

    Intracranial hypertension (ICH) is the most important modifiable factor with predictive negative value in brain injury patients. Osmotherapy is the most important first level specific measure in the treatment of ICH. Mannitol 20%, and 3, 7.5, 10, and 23% hypertonic sodium chloride are the most commonly used osmotic agents in the neurocritical care setting. Currently, controversy about the best osmotic agent remains elusive. Therefore, over the past few years, half-molar sodium lactate has been introduced as a new osmotic agent to be administered in the critically ill. Lactate is able to prevent hyperchloremia, as well as its adverse effects such as hyperchloremic acidosis, systemic inflammation, and acute kidney injury. Furthermore, lactate may also be used by glia as energy substrate in brain injury patients. Half-molar sodium lactate would also have a more potent and long-lasting effect decreasing intracellular osmolarity and by inhibiting neuronal volume control mechanisms. Pioneering researches in patients with traumatic brain injury have shown a more significant effect than mannitol on the control of ICH. In addition, in this group of patients this solution appears to be beneficial in preventing episodes of ICH. However, future research is necessary to corroborate or not these promising results. Copyright © 2015 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

  3. Cicatrización periodontal del segundo molar mandibular tras la exodoncia del tercer molar mandibular incluido

    OpenAIRE

    Inocêncio Teixeira de Faria, Ana Cristina

    2015-01-01

    La extracción quirúrgica del tercer molar (M3) puede provocar complicaciones periodontales en la cara distal del segundo molar (M2) adyacente. Se realizó un estudio clínico prospectivo a 12 meses en 25 pacientes jóvenes sanos (edad media 21 años) sometidos a 40 extracciones quirúrgicas de M3 mandibulares incluidos con elevado riesgo periodontal, con objeto de estudiar la cicatrización periodontal espontánea en la cara distal del M2. Prequirúrgicamente y a 3, 6 y 12 meses tras l...

  4. Brain structural correlates of reward sensitivity and impulsivity in adolescents with normal and excess weight.

    Directory of Open Access Journals (Sweden)

    Laura Moreno-López

    Full Text Available INTRODUCTION: Neuroscience evidence suggests that adolescent obesity is linked to brain dysfunctions associated with enhanced reward and somatosensory processing and reduced impulse control during food processing. Comparatively less is known about the role of more stable brain structural measures and their link to personality traits and neuropsychological factors on the presentation of adolescent obesity. Here we aimed to investigate regional brain anatomy in adolescents with excess weight vs. lean controls. We also aimed to contrast the associations between brain structure and personality and cognitive measures in both groups. METHODS: Fifty-two adolescents (16 with normal weight and 36 with excess weight were scanned using magnetic resonance imaging and completed the Sensitivity to Punishment and Sensitivity to Reward Questionnaire (SPSRQ, the UPPS-P scale, and the Stroop task. Voxel-based morphometry (VBM was used to assess possible between-group differences in regional gray matter (GM and to measure the putative differences in the way reward and punishment sensitivity, impulsivity and inhibitory control relate to regional GM volumes, which were analyzed using both region of interest (ROI and whole brain analyses. The ROIs included areas involved in reward/somatosensory processing (striatum, somatosensory cortices and motivation/impulse control (hippocampus, prefrontal cortex. RESULTS: Excess weight adolescents showed increased GM volume in the right hippocampus. Voxel-wise volumes of the second somatosensory cortex (SII were correlated with reward sensitivity and positive urgency in lean controls, but this association was missed in excess weight adolescents. Moreover, Stroop performance correlated with dorsolateral prefrontal cortex volumes in controls but not in excess weight adolescents. CONCLUSION: Adolescents with excess weight have structural abnormalities in brain regions associated with somatosensory processing and motivation.

  5. Limiting law excess sum rule for polyelectrolytes.

    Science.gov (United States)

    Landy, Jonathan; Lee, YongJin; Jho, YongSeok

    2013-11-01

    We revisit the mean-field limiting law screening excess sum rule that holds for rodlike polyelectrolytes. We present an efficient derivation of this law that clarifies its region of applicability: The law holds in the limit of small polymer radius, measured relative to the Debye screening length. From the limiting law, we determine the individual ion excess values for single-salt electrolytes. We also consider the mean-field excess sum away from the limiting region, and we relate this quantity to the osmotic pressure of a dilute polyelectrolyte solution. Finally, we consider numerical simulations of many-body polymer-electrolyte solutions. We conclude that the limiting law often accurately describes the screening of physical charged polymers of interest, such as extended DNA.

  6. Molar Intubation for Intra Oral Swellings:Our Experience

    Directory of Open Access Journals (Sweden)

    Meenoti Potdar

    2008-01-01

    Full Text Available Molar intubation is a technique of laryngoscopy that can be used for anticipated difficult intubation in cases where standard laryngoscopy technique is difficult due to presence of any intraoral mass that anatomically hampers laryngoscopy or that bleeds on touch. This technique is very easy, reliable and rewarding but should be practiced on normal patients for easy application in actual difficult cases.

  7. Variant Root Morphology of Third Mandibular Molar in Normal and ...

    African Journals Online (AJOL)

    isaac kipyator

    2017-11-12

    Nov 12, 2017 ... Anatomy Journal of Africa. 2017. Vol 6 (3): 1052 - 1061. 1052. ORIGINAL COMMUNICATION. Variant Root Morphology of Third Mandibular Molar in Normal and. Impacted Teeth. Isaac Kipyator Bokindo1, Fawzia Butt 2,3, Francis Macigo4. 1School of Dental Sciences, University of Nairobi, Nairobi, Kenya.

  8. Ectopic (tubal) Molar Gestation: Report Of Two Cases | Abdul ...

    African Journals Online (AJOL)

    Ectopicmolar gestation is a rare event. Itsmalignant potential is similar to that of an intrauterine molar pregnancy. To document two cases of tubalmolar gestations seen over a 10-year period. Case series. Two young Nigerian undergraduates presented with features of ruptured tubal pregnancy. They had total salpingectomy ...

  9. Management of inflammatory complications in third molar surgery: A ...

    African Journals Online (AJOL)

    Results: Methods ranges from surgical closure techniques, use of drains, physical therapy and pharmacological means. Studies reviewed have shown that no single modality effectively minimizes postoperative pain, swelling and trismus without undesirable effects. Conclusion: Inflammatory complications after third molar ...

  10. SIGNS Molar tooth sign − looking beyond the obvious

    African Journals Online (AJOL)

    The molar tooth sign refers to the characteristic appearance on axial CT or MRI of enlarged and horizontally directed columnar structures on each side of the midline flanking a deep interpeduncular fossa.[1] This appearance is a result of absence or hypoplasia of the cerebellar vermis, lack of normal dorsal decussation and ...

  11. Complete molar pregnancy in a 53-year-old woman

    African Journals Online (AJOL)

    Enrique

    43. SA JOURNAL OF RADIOLOGY • May 2004. CASE REPORT. Introduction. This case emphasises the role of sonography in the diagnosis of a com- plete molar pregnancy. Case report. A 53-year-old female, para 13 gravid 13, presented to the casualty department of Pretoria Academic. Hospital with a complaint of PV (per.

  12. Canal pattern in mesiobuccal root of maxillary molars of Nigerians ...

    African Journals Online (AJOL)

    planed maxillary first and second molars respectively were sectioned transversely at three different points corresponding to the cemento-enamel junction, the peak of the external outline of the furcation and the margin of the middle and apical thirds ...

  13. Impacted Mandibular Third Molars: Review of Literature and a ...

    African Journals Online (AJOL)

    Impacted tooth is a tooth which is completely or partially unerupted and is positioned against another tooth, bone or soft tissue so that its further eruption is unlikely, described according to its anatomic position.[1] The third molar impaction is occurring in about 73% of the young adults in Europe,[2] these teeth generally erupt ...

  14. Dental caries pattern of first and second permanent molars and ...

    African Journals Online (AJOL)

    Objective: The study was carried out to assess the dental caries pattern of first and second permanent molars and treatment needs among adolescent Nigerians in Lagos. Method: Examinations for dental caries and treatment needs in accordance with the criteria of the World Health Organization Basic Methods for oral ...

  15. internal root morphology in maxillary first permanent molars in a ...

    African Journals Online (AJOL)

    2011-03-03

    Mar 3, 2011 ... N. J. Muriithi, BDS (NBI), MDS, Prosthodontist, Ministry of Medical Services, Divisional of Oral Health, Rift Valley. Provincial Hospital, P. O. Box .... molars and satisfied the inclusion criteria were selected. The study was approved by the .... according to Vertucci classification. Type I. Type II. Type VII. Type VIII.

  16. Case report - Ectopic molar pregnancy: A case report | Bousfiha ...

    African Journals Online (AJOL)

    The patient was followed with weekly quantitative ;-hCG titers until three successive ;-hCG levels were negative. It is pertinent that clinicians take routine histological examination of tubal specimens in ectopic pregnancy very seriously in order to diagnose cases of ectopic molar gestations early and mount appropriate post ...

  17. ON THE MOLAR POLARIZABILITIES OF BINARY MIXTURES FROM ...

    African Journals Online (AJOL)

    TBA), lso-Propyl alcohol (IPA) and Toluene (TOL) were prepared at 298k and 1 atm. Subsequently, the densities, mole fractions and refractive indices of the mixtures and their pure components were obtained at 298k. The average molar ...

  18. internal root morphology in mandibular first permanent molars in a ...

    African Journals Online (AJOL)

    2013-11-06

    Nov 6, 2013 ... and for disinfection. Subsequently, the teeth were ... (70%, 95%, 100%) of ethyl alcohol (Scharlab S.L.. Sentmenat, Spain) for three ... Number of canals in mandibular first molars. 100. 90. 80. 70. 60. 50. 40. 30. 20. 10. 0. 3.2%.

  19. Variant Root Morphology of Third Mandibular Molar in Normal and ...

    African Journals Online (AJOL)

    isaac kipyator

    2017-11-12

    Nov 12, 2017 ... The mandibular third molar poses a challenge to dental surgeons due to it's unpredictable morphology which leads to increased difficulty during its .... Regeneration within the canal will thus be unimpeded unless obstructed by ... MATERIALS AND METHODS. A descriptive study was carried out at the.

  20. Taurodontism of deciduous and permanent molars: report of two cases.

    Science.gov (United States)

    Rao, Ashwin; Arathi, R

    2006-03-01

    Taurodontism is an aberration of teeth that lacks the constriction at the level of the CEJ characterized by elongated pulp chambers and apical displacement of bifurcation or trifurcation of the roots, giving it a rectangular shape. Its occurrence in permanent teeth is common and is quite rare in deciduous dentition. Presented in this article are two cases with taurodontism involving deciduous and permanent molars.

  1. A Rare Condition of Bimaxillary Primary Molar Taurodontism

    OpenAIRE

    Avula Jogendra Sai Sankar; Enuganti Sreedevi; Akkala Satya Gopal; Manne Naga Lakshmi

    2017-01-01

    Taurodontism is a relatively rare variance with a very low incidence in primary dentition and only a few cases have been reported in the literature. It stands a challenge when these teeth require pulp therapy. This case report illustrates the oral rehabilitation of multiple primary molars with taurodontism involving both the maxillary and mandibular arches, which is a rare occurrence.

  2. A Rare Condition of Bimaxillary Primary Molar Taurodontism.

    Science.gov (United States)

    Jogendra Sai Sankar, Avula; Sreedevi, Enuganti; Satya Gopal, Akkala; Naga Lakshmi, Manne

    2017-06-01

    Taurodontism is a relatively rare variance with a very low incidence in primary dentition and only a few cases have been reported in the literature. It stands a challenge when these teeth require pulp therapy. This case report illustrates the oral rehabilitation of multiple primary molars with taurodontism involving both the maxillary and mandibular arches, which is a rare occurrence.

  3. Temporal abscess after third molar extraction in the mandible.

    Science.gov (United States)

    de Oliveira Neto, Patrício José; de Souza Maliska, Maximiana Cristina; Sawazaki, Renato; Asprino, Luciana; de Moraes, Márcio; Moreira, Roger William Fernandes

    2012-03-01

    Dental infections resulting before or after third molar removal are complications in which the maxillofacial surgeon may have to initiate an earlier management. The severe dental infections resulting before or after this procedure is one of the few life-threatening complications in which the maxillofacial surgeon may have to initiate an earlier management. Infections involving the temporal space are rare and infrequently reported. Infections in this space have also been observed secondary to maxillary sinusitis, maxillary sinus fracture, temporomandibular arthroscopy, and drug injection, although more commonly associated to third molar infections. A 22-year-old man had undergone extraction of tooth 38 secondary to pericoronaritis by a general dentist. Physical examination of his face demonstrated severe trismus, pain, and swelling in temporal region. A CT scan showed an inflammatory area into the temporal space. He was started on IV cephalosporin, but the clinical course of the patient was not satisfactory. Incision and drainage were performed from an extraoral and intraoral approach. After discharged, the antibiotic was switched to clindamycin IO 600 mg. The retromaxillary and temporal infections are quite common after maxillary molar extractions but not after mandibular third molar, the spread mechanism of ascension must be involved with the virulence of microorganisms, but more studies are necessary to clarify this occurrence.

  4. Molar extinction coefficients of some carbohydrates in aqueous ...

    Indian Academy of Sciences (India)

    pp. 521–528. Molar extinction coefficients of some carbohydrates in aqueous solutions. K SINGH£, G K SANDHU, B S LARKa and S P SUDb. Department of Physics, Guru Nanak Dev University, Amritsar 143 005, India. aDepartment of Chemistry, Guru Nanak Dev University, Amritsar 143 005, India. bDepartment of Physics ...

  5. Molar extinction coefficients of solutions of some organic compounds

    Indian Academy of Sciences (India)

    were also fitted to third-order polynomial for all the carbohydrates of CnH2nOn type. Value of molar extinction coefficient is independent of the concentration of the solution as illustrated in figure 2. Using the present experimental data of mass attenuation coefficients of solutions and of H, C and O at different energies from ...

  6. Masticatory function following implants replacing a second molar.

    Science.gov (United States)

    Kim, Moon-Sun; Lee, Jae-Kwan; Chang, Beom-Seok; Um, Heung-Sik

    2011-04-01

    The aim of this study was to obtain objective and standardized information on masticatory function and patient satisfaction following second molar single implant therapy. Twenty adult patients, who had restored second molar single implants more than 1 month before the study, were enrolled in this study. All patients received a chewing test using peanuts before and after insertion of the implant prosthesis, with a questionnaire and visual analogue scale (VAS) to evaluate the effect of second molar single implant therapy. This study obtained standardized information on the masticatory function objectively (e.g., P, R, X(50)) before (Pre-insertion) and after insertion (Post-insertion) of the implant prosthesis. Masticatory performance (P) after insertion of the implant prosthesis significantly increased from 67.8±9.9 to 84.3±8.5% (Pmasticatory efficiency index (R) of Post-insertion is higher than that of Pre-insertion (Pfunctional point of view. These findings indicate that a second molar single implant can increase masticatory function.

  7. Inflammatory root resorption in primary molars: prevalence and associated factors.

    Science.gov (United States)

    Vieira-Andrade, Raquel Gonçalves; Drumond, Clarissa Lopes; Alves, Laura Pereira Azevedo; Marques, Leandro Silva; Ramos-Jorge, Maria Letícia

    2012-01-01

    This study aimed at determining the prevalence of inflammatory root resorption and associated factors in 1068 primary mandibular molars in 453 children 3 to 12 years of age. Age, dental history and medical history were recorded using a questionnaire administered to the children's parents/caregivers. Previously trained and calibrated examiners assessed radiographic images of the primary molars by direct observation, with the aid of a viewing box. Root resorption (physiological or inflammatory), dental crown status (healthy, carious with no pulp involvement, carious with pulp involvement and evidence of restoration), and pulpotomy or pulpectomy were determined. Data analysis involved descriptive statistics, the chi-square test and a multiple logistic regression (p pulpectomy (OR: 5.4; 95% CI) were risk factors for the occurrence of inflammatory root resorption in primary molars. In conclusion, the prevalence of inflammatory root resorption in the present sample was 16.2%. Gender, age, an unhealthy tooth, caries with pulp involvement, pulpotomy, pulpectomy, and the absence of a restoration were associated with a higher occurrence of inflammatory root resorption in primary molars.

  8. Inflammatory root resorption in primary molars: prevalence and associated factors

    Directory of Open Access Journals (Sweden)

    Raquel Gonçalves Vieira-Andrade

    2012-08-01

    Full Text Available This study aimed at determining the prevalence of inflammatory root resorption and associated factors in 1068 primary mandibular molars in 453 children 3 to 12 years of age. Age, dental history and medical history were recorded using a questionnaire administered to the children's parents/caregivers. Previously trained and calibrated examiners assessed radiographic images of the primary molars by direct observation, with the aid of a viewing box. Root resorption (physiological or inflammatory, dental crown status (healthy, carious with no pulp involvement, carious with pulp involvement and evidence of restoration, and pulpotomy or pulpectomy were determined. Data analysis involved descriptive statistics, the chi-square test and a multiple logistic regression (p < 0.05. The prevalence of inflammatory root resorption was 16.2% (n = 173. The male gender (OR: 1.4; 95% CI, the 3-to-7-years age bracket (OR: 1.5; 95% CI, an unhealthy dental crown (OR: 8.7; 95% CI, caries with pulp involvement (OR: 7.4; 95% CI, pulpotomy (OR: 3.1; 95% CI, and pulpectomy (OR: 5.4; 95% CI were risk factors for the occurrence of inflammatory root resorption in primary molars. In conclusion, the prevalence of inflammatory root resorption in the present sample was 16.2%. Gender, age, an unhealthy tooth, caries with pulp involvement, pulpotomy, pulpectomy, and the absence of a restoration were associated with a higher occurrence of inflammatory root resorption in primary molars.

  9. Permanent versus temporary restorations after emergency pulpotomies in primary molars.

    Science.gov (United States)

    Guelmann, Marcio; Fair, Jodi; Bimstein, Enrique

    2005-01-01

    The purpose of this retrospective study was to determine if immediate placement of a stainless steel crown (SSC) after emergency pulpotomies in primary molars would result in a better outcome when compared to different temporary restorations. Records of 94 emergency pulpotomies in primary molars performed at a university pediatric graduate dental clinic between July 2001 and June 2004 were analyzed. Inclusion criteria included: (1) teeth with a positive history of spontaneous or elicited pain; (2) deep caries with close approximation to the pulp; (3) absence of clinical and radiographic signs of pulpal degeneration; (4) abnormal mobility; or (5) swelling. Pulpotomized teeth were temporarily restored with a zinc oxide eugenol-based temporary restoration (IRM) covered with Ketac Molar or with a permanent restoration (SSC). The time interval between emergency and definitive treatment or recall, age, gender, tooth type, and arch were the variables analyzed in the study. Success was determined by record (progress notes and radiographs) verification of SSC placement in case of a temporary restoration and by confirmation of crown presence during recall exam. Data from emergency pulpotomies restored only with IRM was added to the study and included in the statistical analysis. Superior clinical success was obtained when emergency pulpotomies were restored with SSC (86%) when compared to IRM only (61%) or IRM and Ketac Molar combined (77%). Statistical significance was obtained in favor of SSC when survival analysis was performed (P.05). Immediate placement of an SSC tended to improve the chances for success when emergency pulpotomies are performed.

  10. Impacted third molar transplantation on the malpracticed extraction ...

    African Journals Online (AJOL)

    ... followed after transplant for a four-year period with the best satisfaction. Funding: A grant of the Korean Health Technology R&D Project, Ministry of Health & Welfare, Republic of Korea. (HI15C0689). Keywords: Autotransplantation, Endodontic treatment, Impacted third molar, Malpracticed extraction, Maxillofacial specialty ...

  11. Evaluation of radiographic features of embedded primary molar ...

    African Journals Online (AJOL)

    2014-05-20

    May 20, 2014 ... should be alert to this possibility and should perform a thorough clinical and radiographic examination. If these primary molar roots are allowed to remain in the oral cavity, periodontist should be aware of their presence and modify the treatment plan accordingly.[13]. Differential diagnosis of retained roots ...

  12. Miniscrew-supported coil spring for molar uprighting: description

    Directory of Open Access Journals (Sweden)

    Antônio Carlos de Oliveira Ruellas

    2013-02-01

    Full Text Available INTRODUCTION: Since the beginning of miniscrews as orthodontic anchorage, many applications have been described in the literature. Among these, one is the uprighting of mesially inclined molars. In regard to the mechanical aspects, however, there is little information about the application of orthodontic forces using such devices. OBJECTIVE: The objective of this study was to describe a miniscrew supported spring for uprighting of mesially inclined molars. With this device, one can achieve the correct use of orthodontic biomechanics, thus favoring more predictable tooth movements and preventing unwanted movements from occurring.INTRODUÇÃO: desde o surgimento dos mini-implantes como recurso de ancoragem ortodôntica, muitas aplicações têm sido descritas na literatura. Entre essas, cita-se a verticalização de molares inclinados para mesial. No entanto, pouco se fala da correta aplicação das forças ortodônticas nesses dispositivos, sob o ponto de vista mecânico. OBJETIVOS: o objetivo desse artigo foi demonstrar uma mola mini-implante suportada para verticalizar molares inclinados para mesial. Com esse dispositivo consegue-se correta aplicação da mecânica ortodôntica, favorecendo movimentos mais previsíveis e minimizando os movimentos indesejáveis.

  13. Risk for molars without antagonists: opinion of dental practitioners in ...

    African Journals Online (AJOL)

    Results: The great majority of practitioners (92%) believed that unopposed molars overerupt markedly and majority (87%) recommends replacement of the missing antagonist with partial dentures while 13% preferred to wait and see. The main reasons for the suggested treatment were (1) to prevent overeruption of ...

  14. Geometric morphometric analysis of the molars in three species of ...

    African Journals Online (AJOL)

    The relatively new technique of outline-based geometric morphometrics was applied in a study of the variation in the shape of the upper and lower molars among 122 mice, belonging to one species from Iran (Mus musculus) and two species from Europe (Mus macedonicus, Mus spicilegus). Differentiation of specimens ...

  15. Antibiotic prophylaxis in third molar surgery: a review

    NARCIS (Netherlands)

    Oomens, M.A.E.; Forouzanfar, T.

    2012-01-01

    Objective: Controversy exists about the efficacy of antibiotic prophylaxis in preventing complications after lower third molar surgery. For evidence-based recommendation, a review was performed on clinical trials reporting the use of antibiotic prophylaxis compared with no treatment or placebo with

  16. Antibiotic prophylaxis in third molar surgery: a review

    NARCIS (Netherlands)

    Oomens, M.A.E.; Forouzanfar, T.

    2012-01-01

    Objective Controversy exists about the efficacy of antibiotic prophylaxis in preventing complications after lower third molar surgery. For evidence-based recommendation, a review was performed on clinical trials reporting the use of antibiotic prophylaxis compared with no treatment or placebo with

  17. Acute Pericoronitis And The Position Of The Mandibular Third Molar ...

    African Journals Online (AJOL)

    This study evaluates the relationship of acute pericoronitis to the position of the mandibular third molar in Nigerians. One hundred and thirty-two cases of acute pericoronitis seen over a period of 6 months at the state Dental Centre, Kaduna were studied. The tooth with the highest risk for acute pericoronitis was found to be ...

  18. Update in the technique of third molar surgery | Obiechina | Annals ...

    African Journals Online (AJOL)

    No Abstract. Keywords: third molar, impaction; preoperative assessment; surgery. Annals of Ibadan Postgraduate Medicine Vol. 1 (1) 2003: pp. 40-45. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/aipm.v1i1.39100 · AJOL African ...

  19. Prevalence Of Molar Incisor Hypomineralisation In Six To Eight Year ...

    African Journals Online (AJOL)

    Objective: To determine the prevalence of molar incisor hypomineralization (MIH) and any associated causes of MIH in children from two rural divisions in Kenya. Design: Prospective cross-sectional study. Setting: Seventeen primary schools in Matungulu and Kangundo divisions of Machakos district in Kenya. Subjects: All ...

  20. Unilateral maxillary molar distalization with zygoma-gear appliance.

    Science.gov (United States)

    Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

    2012-08-01

    The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  1. The High Price of Excessive Alcohol Consumption

    Centers for Disease Control (CDC) Podcasts

    2011-10-17

    This podcast is based on the October 2011 release of a report estimating the economic cost of excessive drinking. Excessive alcohol consumption cost the U. S. $223.5 billion in 2006, or about $1.90 per drink. Over three-quarters (76%) of these costs were due to binge drinking, defined as consuming 4 or more alcoholic beverages per occasion for women or 5 or more drinks per occasion for men.  Created: 10/17/2011 by National Center for Chronic Disease Prevention and Health Promotion.   Date Released: 10/17/2011.

  2. Contrast induced hyperthyroidism due to iodine excess

    Science.gov (United States)

    Mushtaq, Usman; Price, Timothy; Laddipeerla, Narsing; Townsend, Amanda; Broadbridge, Vy

    2009-01-01

    Iodine induced hyperthyroidism is a thyrotoxic condition caused by exposure to excessive iodine. Historically this type of hyperthyroidism has been described in areas of iodine deficiency. With advances in medicine, iodine induced hyperthyroidism has been observed following the use of drugs containing iodine—for example, amiodarone, and contrast agents used in radiological imaging. In elderly patients it is frequently difficult to diagnose and control contrast related hyperthyroidism, as most of these patients do not always present with typical signs and symptoms of hyperthyroidism. Treatment can be very challenging as drugs commonly used to treat hyperthyroidism have little effect on already formed thyroid hormone due to iodine excess. PMID:22053166

  3. [The relation of pericoronitis to the position of the mandibular third molar].

    Science.gov (United States)

    Lee, D K; Kim, B J

    1989-02-01

    Pericoronitis is the most commonly encountered pathologic condition involving the mandibular third molar. Because of the dangers associated with mandibular third molar pericoronitis, prophylactic extraction of third molar at high risk has been recommended. We studied 411 patients with mandibular third molar pericoronitis by clinical symptoms and radiographic measurement of mandibular third molar height, wideth and angulation. The results were as follows: 1. Mandibular third molar pericoronitis is frequently seen in third decade and there are no sexual difference significantely. 2. In inflammatory type of mandibular third molar pericoronitis, chronic pericoronitis occured more frequently than acute type. 3. In relation to angulation and height, mandibular third molar most likely to be afflicted with pericoronitis is vertical eruption at occlusal plane of the second molar. 4. In relation to angulation and width, it appears that the position of the mandibular third molar most likely to be afflicted with pericoronitis is in a vertically erupted tooth of which the space between the ramus and the distal side of the second molar is less than the mesiodistal diameter of crown. (Class II). 5. In relation to height and width, it appears that the position of the mandibular third molar most likely to be afflicted with pericoronitis is class II width (described above)at occlusal plane of the second molar.

  4. 34 CFR 300.16 - Excess costs.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Excess costs. 300.16 Section 300.16 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN WITH...

  5. Excessive Positivism in Person-Centered Planning

    Science.gov (United States)

    Holburn, Steve; Cea, Christine D.

    2007-01-01

    This paper illustrates the positivistic nature of person-centered planning (PCP) that is evident in the planning methods employed, the way that individuals with disabilities are described, and in portrayal of the outcomes of PCP. However, a confluence of factors can lead to manifestation of excessive positivism that does not serve PCP…

  6. Excessive daytime sleepiness, nocturnal sleep duration and ...

    African Journals Online (AJOL)

    Background and objectives. Short nocturnal sleep duration resulting in sleep debt may be a cause of excessive daytime sleepiness (EDS). Severity of depression (psychopathology) has been found to be directly related to EDS. There is an association between sleep duration and mental health, so there may therefore be an ...

  7. Excessive prices as abuse of dominance?

    DEFF Research Database (Denmark)

    la Cour, Lisbeth; Møllgaard, Peter

    2007-01-01

    firm abused its position by charging excessive prices. We also test whether tightening of the Danish competition act has altered the pricing behaviour on the market. We discuss our results in the light of a Danish competition case against the dominant cement producer that was abandoned by the authority...

  8. Surface temperature excess in heterogeneous catalysis

    NARCIS (Netherlands)

    Zhu, L.

    2005-01-01

    In this dissertation we study the surface temperature excess in heterogeneous catalysis. For heterogeneous reactions, such as gas-solid catalytic reactions, the reactions take place at the interfaces between the two phases: the gas and the solid catalyst. Large amount of reaction heats are released

  9. Origin of excess 176Hf in meteorites

    DEFF Research Database (Denmark)

    Thrane, Kristine; Connelly, James; Bizzarro, Martin

    2010-01-01

    with Lu/Hf elemental ratios in meteorites older than similar to 4.56 Ga meteorites unresolved. We attribute (176)Hf excess in older meteorites to an accelerated decay of (176)Lu caused by excitation of the long-lived (176)Lu ground state to a short-lived (176m)Lu isomer. The energy needed to cause...

  10. Excessive nitrogen and phosphorus in European rivers

    NARCIS (Netherlands)

    Blaas, Harry; Kroeze, Carolien

    2016-01-01

    Rivers export nutrients to coastal waters. Excess nutrient export may result in harmful algal blooms and hypoxia, affecting biodiversity, fisheries, and recreation. The purpose of this study is to quantify for European rivers (1) the extent to which N and P loads exceed levels that minimize the

  11. Excessive infant crying : definitions determine risk groups

    NARCIS (Netherlands)

    Reijneveld, SA; Brugman, E; Hirasing, RA

    We assessed risk groups for excessive infant crying using 10 published definitions, in 3179 children aged 1-6 months (response: 96.5%). Risk groups regarding parental employment, living area, lifestyle, and obstetric history varied by definition. This may explain the existence of conflicting

  12. Low excess air operations of oil boilers

    Energy Technology Data Exchange (ETDEWEB)

    Butcher, T.A.; Celebi, Y.; Litzke, Wai Lin [Brookhaven National Labs., Upton, NY (United States)

    1997-09-01

    To quantify the benefits which operation at very low excess air operation may have on heat exchanger fouling BNL has recently started a test project. The test allows simultaneous measurement of fouling rate, flue gas filterable soot, flue gas sulfuric acid content, and flue gas sulfur dioxide.

  13. Cholesterol-induced variations in the volume and enthalpy fluctuations of lipid bilayers.

    Science.gov (United States)

    Halstenberg, S; Heimburg, T; Hianik, T; Kaatze, U; Krivanek, R

    1998-07-01

    The sound velocity and density of suspensions of large unilamellar liposomes from dimyristoylphosphatidylcholine with admixed cholesterol have been measured as a function of temperature around the chain melting temperature of the phospholipid. The cholesterol-to-phospholipid molar ratio xc has been varied over a wide range (0 volume of the phospholipid, and of the apparent specific adiabatic compressibility have been derived from the measured data. These data are particularly discussed with respect to the volume fluctuations within the samples. A theoretical relation between the compressibility and the excess heat capacity of the bilayer system has been derived. Comparison of the compressibilities (and sound velocity numbers) with heat capacity traces display the close correlation between these quantities for bilayer systems. This correlation appears to be very useful as it allows some of the mechanical properties of membrane systems to be calculated from the specific heat capacity data and vice versa.

  14. Influence of the cavity-size on the survival rate of proximal ART restorations in primary molars.

    Science.gov (United States)

    Kemoli, Arthur Musakulu; van Amerongen, Willem Evert

    2009-11-01

    To evaluate the influence of the size of proximal cavities on the survival rate of the atraumatic restorative treatment (ART) restorations. A total of 804 children, aged 6-8 years, from a low socio-economic community, with an ART restorable proximal carious lesion in their primary molars, participated. Over a 3-week period, three 'experienced' and four 'inexperienced' operators randomly paired with four 'experienced' and four 'inexperienced' assistants, made the restorations at site using hand instruments. They randomly used Fuji IX, Ketac Molar Easymix and Ketac Molar Aplicap glass ionomer cements to restore the cavities, under randomly selected rubber dam and cotton roll isolation methods. The fillings were independently evaluated by nine trained and calibrated evaluators. After 1 year, the survival rate of the fillings evaluated in the study was 44.8%. Irrespective of the other factors involved, restorations with the highest survival rate were of size between 2 and 3 mm (mesio-distal, bucco-lingual, and depth) or volumes 10.0-19.9 mm(3) (Chi-square, P = 0.002, KM mean survival of 345 days). While the survival rates for class II ART restorations were still low, the choice of medium-sized proximal cavities gave better survival rates for this technique.

  15. In Vitro Comparative Evaluation of Cleaning Efficacy and Volumetric Filling in Primary Molars: Cone Beam Computed Tomography Evaluation

    Science.gov (United States)

    Deshpande, Anshula Neeraj; Joshi, Neelam Hasmukhbhai; Naik, Kishan S.

    2017-01-01

    Introduction: Pulpectomy of primary teeth is mostly carried out with hand files and broaches which is tricky and time consuming procedure. The development of new design features like varying tapers, non-cutting safety tips and varying length of cutting blades have resulted in new generation of rotary instruments. Aim: To compare and evaluate cleaning efficacy, canal preparation and volumetric filling using conventional files and rotary V Taper files through cone beam computed tomography. Materials and Method: Thirty extracted primary molars were selected. The teeth were randomly divided into three groups each containing 10 teeth i.e. 30 canals in each group. Group A was instrumented with K files; Group B rotary V Taper files and Group C was Hybrid group. Sodium hypochlorite (1%) was used for irrigation. Root canal filling was done with Zinc Oxide Eugenol cement in all groups. The volumetric analysis i.e. Percentage of Volume (POV) of the root canal filling in primary molars was done through CBCT Software. Result: In present study, p- value was found to be significant (primary molar endodontics, especially with unpredictability and difficulty of canal morphology, is inevitable. The study confirms superior ability of rotary-file systems to shape severely curved canals with less time and significant decrease in procedural errors like partial filling, voids and inappropriate canal preparation. PMID:28566848

  16. Influence of monomer and crosslinker molar ratio on the swelling behaviour of thermosensitive hydrogels

    National Research Council Canada - National Science Library

    Ilić-Stojanović Snežana S; Nikolić Ljubiša; Nikolić Vesna; Stanković Mihajlo; Stamenković Jakov; Mladenović-Ranisavljević Ivana; Petrović Slobodan

    2012-01-01

    ... of monomer and crosslinker molar ratios on the swelling behaviour was investigated. Synthesis of thermosensitive hydrogel based on N-isopropylacrylamide was carried out with the molar ratios of 5, 10, 15 and 20 mol...

  17. Molar Uprighting Using Mini-Screws after Distalization by the Pendulum Appliance: A Case Report

    Directory of Open Access Journals (Sweden)

    Amir Moradi

    2013-12-01

    Full Text Available A 16-year-old Class II female patient was treated without tooth extraction. The upper first molars were distalized by the Pendulum appliance. After six months, the molars tipped significantly to the distal. To correct this side effect, we decided to upright the molars using skeletal anchorage. On each side, a mini-screw was inserted between first and second premolars in the buccal cortical plate. An auxiliary spring was placed between the mini-screw head and the molar buccal tube. The resultant moment made the first molar upright. In addition, the side effects of this mechanic, i.e. molar intrusion and molar buccal tipping, counteract the extrusion and medial movement caused by the Pendulum Appliance. The aim of this case report was to present an innovative method for molar uprighting using skeletal anchorage.

  18. Clinical outcomes for primary molars treated by different types of pulpotomy: A retrospective cohort study

    Directory of Open Access Journals (Sweden)

    Heng-Yeh Kuo

    2018-01-01

    Conclusion: Operators and final restorations are confounding factors for determining the success rate of primary molars treated by pulpotomy. Pulpotomy with diode laser, sodium hypochlorite, or no medication are all acceptable treatments of choice for coronally infected primary molars.

  19. Outcomes of intentionally replanted molars according to preoperative locations of periapical lesions and the teeth

    Directory of Open Access Journals (Sweden)

    WooCheol Lee

    2012-06-01

    Conclusions: Within the limitations of this study, IR of mandibular molars seemed to provide a higher success rate than that for maxillary molars, regardless of the presence of preoperative periapical lesions.

  20. C-reactive protein a better indicator of inflammation after third molar ...

    African Journals Online (AJOL)

    operative pain and pre-operative levels of C-reactive and post-operative pain and swelling in impacted third molar surgery. Materials and Methods: In this prospective study subjects were patients indicated for mandibular third molar extraction.

  1. Are there any differences between first and second primary molar pulpectomy prognoses? A retrospective clinical study.

    Science.gov (United States)

    Mendoza-Mendoza, A; Caleza-Jiménez, C; Solano-Mendoza, B; Iglesias-Linares, A

    2017-03-01

    To determine if there are any significant differences between the prognoses of pulpectomies done on first and second primary molars of the upper and lower dental arch. Study Design: The clinical study included 55 children who had undergone 86 pulpectomy treatments, 41 on the first molars and 45 on the second molars. The root canal filling material consisted of a paste based on Walkhoff formula, containing Kri-1, calcium hydroxide and meta-cresol formaldehyde. The same clinician carried out all pulpectomies. After the analysis there were a total of 7 treatment failures (3 in the upper arch and 4 in the lower). Four of the 7 failures were first primary molars and three were second primary molars. There were no significant differences in the prognoses of the different kinds of primary molars. The anatomy of the primary molars changes considerably. Significant differences were not observed in the prognosis of different types of primary molars after pulpectomy.

  2. Immediate changes in the mandibular dentition after maxillary molar distalization using headgear

    OpenAIRE

    Kang, Sung-Ja; Kim, Hyun-Hee; Hwang, Hyeon-Shik; Lee, Kyung-Min

    2017-01-01

    The purpose of this study was to investigate immediate changes in the mandibular dentition after maxillary molar distalization using headgear in non-growing patients. Sixteen patients (mean age, 18.9 ? 2.0 years) with Class II molar relationship and crowding were included in the present study. To correct the molar relationship, headgear was used for maxillary molar distalization. Cone-beam computed tomography-generated half-cephalograms (CG Cephs) and dental casts were used to evaluate dental...

  3. A comparative study between lip bumper and headgear as maxillary molar retainers following distalization.

    Science.gov (United States)

    Silva, Rafael Games Corrêa; Kaieda, Armando Koichiro; Paranhos, Luiz Renato; Angelieri, Fernanda; Torres, Fernando César; Scanavini, Marco Antônio

    2012-01-01

    Abstract: There are many appliances that can be used to correct molar relationship, achieving upper molar distalization, in Class II malocclusion. This research aimed to study the dental effects promoted by lip bumper to retain maxillary molars that had previously been distalized using a Cetlin appliance in conjunction with headgear.

  4. CAD/CAM Preparation Design Effects on Endodontically Treated and Restored Molars

    Science.gov (United States)

    2016-05-24

    CAD /CAM Preparation Design Effects on Endodontically Treated and Restored Molars Aaron T. Krance CAD /CAM Preparation Design Effect on...manuscript entitled: CAD /CAM Preparation Design Effect on Endodonticallv Treated and Restored Molars is appropriately acknowledged and beyond brief...by a CAD /CAM technique on endodontically treated molars restored with the endocrown method versus ceramic full coverage based on amalgam cores with

  5. Sub-10-Minute Characterization of an Ultrahigh Molar Mass Polymer by Multi-detector Hydrodynamic Chromatography

    Science.gov (United States)

    Molar mass averages, distributions, and architectural information of polymers are routinely obtained using size-exclusion chromatography (SEC). It has previously been shown that ultrahigh molar mass polymers may experience degradation during SEC analysis, leading to inaccurate molar mass averages a...

  6. Correlation between chronological age and third molar developmental stages in an Iranian population (Demirjian method

    Directory of Open Access Journals (Sweden)

    Aria Khosronejad

    2017-01-01

    Conclusion: Development of third molar might complete after the age 22. Iranian individuals with third molars at the G and H stages are likely above 18 while those at E and F are likely below 18. Pace of molar development differs for jaws, but intergender differences are open to further investigations.

  7. The origin of the lower fourth molar in canids, inferred by individual variation

    Directory of Open Access Journals (Sweden)

    Masakazu Asahara

    2016-11-01

    Full Text Available Background An increase in tooth number is an exception during mammalian evolution. The acquisition of the lower fourth molar in the bat-eared fox (Otocyon megalotis, Canidae, Carnivora, Mammalia is one example; however, its developmental origin is not clear. In some canids (Canidae, individual variation exist as supernumerary molar M4. This study focuses on the acquisition of the lower fourth molar in canids and proposes that the inhibitory cascade model can explain its origin. Methods Occlusal view projected area of lower molars was determined from 740 mandibles obtained from Canis latrans, Nyctereutes procyonoides, and Urocyon cinereoargenteus museum specimens. For each molar, relative sizes of molars (M2/M1 and M3/M1 scores affected by inhibition/activation dynamics during development, were compared between individuals with and without supernumerary molar (M4. Results Possession of a supernumerary molar was associated with significantly larger M2/M1 score in Canis latrans, M3/M1 score in Nyctereutes procyonoides, and M2/M1 and M3/M1 scores in Urocyon cinereoargenteus compared to individuals of these species that lacked supernumerary molars. Discussion We propose that, in canids, the supernumerary fourth molar is attributable to reduced inhibition and greater activation during molar development. In the bat-eared fox, altered inhibition and activation dynamics of dental development during omnivorous-insectivorous adaptation may be a contributing factor in the origin of the lower fourth molar.

  8. [Etiological problems of anterior tooth crowding: the role of the third molar].

    Science.gov (United States)

    Minervini, G; Posillico, N

    1990-01-01

    The authors discussed about the extraction or not of the 3 degrees molar either to prevent or correct the dental crowding. They state that, since there is no definitive evidence of the real importance of the 3 degrees molar in creating dental crowding, it is not possible to perform without discrimination 3 degrees molar germectomy nor the extraction for prevention.

  9. Photoelastic stress analysis of mandibular molars moved distally with the skeletal anchorage system.

    Science.gov (United States)

    Nakamura, Atsushi; Teratani, Tsuyoshi; Itoh, Hidemi; Sugawara, Junji; Ishikawa, Hiroyuki

    2007-11-01

    The purpose of this study was to analyze photoelastically the stress distribution around teeth in the simulated distal movement of mandibular molars with the skeletal anchorage system. Two types of the photoelastic mandibular dentition models were used, 1 before and 1 after distal movement of the second molar. The experiment was performed with 3 forms of traction--first-molar single traction, second-molar single traction, and simultaneous first- and second-molar traction. The direction of traction was set parallel to the occlusal plane and at an angle of 30 degrees downward to the occlusal plane. In the first-molar single traction model, extremely high stress was generated around the first molar with traction parallel to the occlusal plane. With the traction 30 degrees downward to the occlusal plane, all models showed the stress around the molars extended distally and downward. Simultaneous traction of the first and second molars might be preferable to the sequential traction of each molar to prevent the unfavorable distal tipping of the first molar. Regardless of whether simultaneous or sequential traction is used, the downward traction to the occlusal plane seems to induce intrusion of the molars as well as their distal movement.

  10. Distance of mandibular foramen from 3 rd molar tooth in dry adult ...

    African Journals Online (AJOL)

    The aim of this study was to determine the distance of MF from 3rd molar tooth in both genders. Seventy dry adult mandible were included in this study. Mandible having 3rd molar tooth was selected for the study. Distance of MF from mid point of 3rd molar tooth to anterior margin of MF was measured with Vernier caliper.

  11. Molar tooth carbonates and benthic methane fluxes in Proterozoic oceans.

    Science.gov (United States)

    Shen, Bing; Dong, Lin; Xiao, Shuhai; Lang, Xianguo; Huang, Kangjun; Peng, Yongbo; Zhou, Chuanming; Ke, Shan; Liu, Pengju

    2016-01-07

    Molar tooth structures are ptygmatically folded and microspar-filled structures common in early- and mid-Proterozoic (∼2,500-750 million years ago, Ma) subtidal successions, but extremely rare in rocks Proterozoic continental margins. In this convergence zone, methyl sulphides served as a non-competitive substrate supporting methane generation and methanethiol inhibited anaerobic oxidation of methane, resulting in the buildup of CH4, formation of degassing cracks in sediments and an increase in the benthic methane flux from sediments. Precipitation of crack-filling microspar was driven by methanogenesis-related alkalinity accumulation. Deep ocean ventilation and oxygenation around 750 Ma brought molar tooth structures to an end.

  12. The Hall Technique for managing carious primary molars.

    Science.gov (United States)

    Innes, Nicola; Evans, Dafydd; Hall, Norna

    2009-10-01

    The Hall Technique, a method of managing carious primary molars effectively with preformed metal crowns, without the use of local anaesthesia, caries removal or tooth preparation of any kind, is described.The technique is illustrated with a case report.The evidence underpinning the technique is discussed, along with indications and contra-indications for its use, and details of where clinicians can obtain further information on the technique if they are considering using it. Research evidence has indicated that the Hall Technique is effective in managing dental caries in primary molar teeth when used by General Dental Practitioners, and is preferred by them, their child patients and the children's parents to conventional restorative methods for these teeth.

  13. Periodontal pathogens in erupting third molars of periodontally healthy subjects.

    Science.gov (United States)

    Rajasuo, A; Sihvonen, O J; Peltola, M; Meurman, J H

    2007-09-01

    The presence of Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia and Tannerella forsythensis in bacteriologic samples of 5-7-mm deep mandibular third-molar pericoronal pockets was analysed by polymerase chain reaction, to test the hypothesis that these sites would harbour the bacteria. The patients were periodontally healthy 20-year-old Finnish male conscripts. Sixteen had acute pericoronitis, 28 chronic pericoronitis, and 15 were symptom-free controls. A. actinomycetemcomitans was detected in only 7% of the samples from chronic pericoronitis cases, whereas P. gingivalis was positive in 20% of the symptom-free versus 69% (P = 0.018) of the acute and 57% (P = 0.044) of the chronic cases. The percentages for P. intermedia were 93, 94 and 93%, and for T. forsythensis 47, 63 and 57%, respectively. These results confirm that, apart from A. actinomycetemcomitans, periodontopathogens are common in third-molar sites in periodontally healthy individuals.

  14. Personalized Recommendation via Suppressing Excessive Diffusion

    Directory of Open Access Journals (Sweden)

    Guilin Chen

    2017-01-01

    Full Text Available Efficient recommendation algorithms are fundamental to solve the problem of information overload in modern society. In physical dynamics, mass diffusion is a powerful tool to alleviate the long-standing problems of recommendation systems. However, popularity bias and redundant similarity have not been adequately studied in the literature, which are essentially caused by excessive diffusion and will lead to similarity estimation deviation and recommendation performance degradation. In this paper, we penalize the popular objects by appropriately dividing the popularity of objects and then leverage the second-order similarity to suppress excessive diffusion. Evaluation on three real benchmark datasets (MovieLens, Amazon, and RYM by 10-fold cross-validation demonstrates that our method outperforms the mainstream baselines in accuracy, diversity, and novelty.

  15. ILLUSION OF EXCESSIVE CONSUMPTION AND ITS EFFECTS

    Directory of Open Access Journals (Sweden)

    MUNGIU-PUPĂZAN MARIANA CLAUDIA

    2015-12-01

    Full Text Available The aim is to explore, explain and describe this phenomenon to a better understanding of it and also the relationship between advertising and the consumer society members. This paper aims to present an analysis of excessive and unsustainable consumption, the evolution of a phenomenon, and the ability to find a way to combat. Unfortunately, studies show that this tendency to accumulate more than we need to consume excess means that almost all civilizations fined and placed dogmatic among the values that children learn early in life. This has been perpetuated since the time when the goods or products does not get so easy as today. Anti-consumerism has emerged in response to this economic system, not on the long term. We are witnessing the last two decades to establish a new phase of consumer capitalism: society hiperconsumtion.

  16. Conservative treatment of excessive anterior pelvic tilt

    DEFF Research Database (Denmark)

    Brekke, Anders Falk

    , DK-5000 Odense C, Denmark ABSTRACT (1795 anslag) Background: Excessive anterior pelvic tilt has been linked to pain and dysfunction of the hip and pelvic region. Conservative treatment (e.g. manual therapy and physical training) is suggested in correcting the tilt and eventually related symptoms...... demonstrated a significant reduction in anterior pelvic tilt. The two studies intervening on symptomatic subjects demonstrated a significant reduction in pain and disability, respectively. Conclusions: Very low quality of evidence suggests that further studies are needed to clarify whether conservative......Conservative treatment of excessive anterior pelvic tilt: A systematic review Anders Falk Brekke1,2,3, Søren Overgaard1,2, Asbjørn Hróbjartsson4, Anders Holsgaard-Larsen1,2 1Orthopaedic Research Unit, Department of Orthopaedic Surgery and Traumatology, Odense University Hospital 2Department...

  17. Endodontic and post-endodontic management of a fused molar

    Directory of Open Access Journals (Sweden)

    Ruchi Gupta

    2013-01-01

    Full Text Available Treatment of fused teeth needs special care and attention to the bizarre anatomy. This paper describes root canal treatment of a fused carious tooth presenting with apical periodontitis. It is a rare case of fusion of the mandibular second molar with a paramolar. There is no literature regarding placement of crown over endodontically treated fused teeth. In this case, the fused teeth were endodontically treated and restored by a porcelain fused to metal crown.

  18. Indirect composite onlay restorations in primary molars: a clinical report.

    Science.gov (United States)

    Villalta, Patricia; Oliveira, Luciana Butini; Imparato, José Carlos Pettorossi; Rodrigues, Célia Regina Martins Delgado

    2006-01-01

    The authors describe a clinical case of oral rehabilitation, in a 4-year-old patient, using indirect composite onlay restorations. Eight severely decayed primnary molars were restored. The clinical findings after 4 years demonstrated the efficiency of the technique as well as its indication in extensive restorations in Pediatric Dentistry, reestablishing function and aesthetics of these primary teeth. The indirect composite onlay restorations seem to wear at rate compatible with primary tooth wear and maintain a smooth, continuous anatomic form.

  19. Prediction of postoperative pain after mandibular third molar surgery

    DEFF Research Database (Denmark)

    Rudin, Asa; Eriksson, Lars; Liedholm, Rolf

    2010-01-01

    To evaluate the predictive potential of preoperative psychological and psychophysiological variables in estimating severity of postoperative pain following mandibular third molar surgery (MTMS). Methods: Following ethical committee approval and informed consent, 40 consecutive patients scheduled...... for MTMS were included. Preoperative psychometric indicators of anxiety, depression, and vulnerability were evaluated by patient questionnaires. Thermal thresholds and heat pain perception (1 second phasic stimuli: 44 degrees C to 48 degrees C) were evaluated with quantitative sensory testing techniques...

  20. Fate of the molar dental lamina in the monophyodont mouse.

    Directory of Open Access Journals (Sweden)

    Hana Dosedělová

    Full Text Available The successional dental lamina (SDL plays an essential role in the development of replacement teeth in diphyodont and polyphyodont animals. A morphologically similar structure, the rudimental successional dental lamina (RSDL, has been described in monophyodont (only one tooth generation lizards on the lingual side of the developing functional tooth. This rudimentary lamina regresses, which has been proposed to play a role in preventing the formation of future generations of teeth. A similar rudimentary lingual structure has been reported associated with the first molar in the monophyodont mouse, and we show that this structure is common to all murine molars. Intriguingly, a lingual lamina is also observed on the non-replacing molars of other diphyodont mammals (pig and hedgehog, initially appearing very similar to the successional dental lamina on the replacing teeth. We have analyzed the morphological as well as ultrastructural changes that occur during the development and loss of this molar lamina in the mouse, from its initiation at late embryonic stages to its disappearance at postnatal stages. We show that loss appears to be driven by a reduction in cell proliferation, down-regulation of the progenitor marker Sox2, with only a small number of cells undergoing programmed cell death. The lingual lamina was associated with the dental stalk, a short epithelial connection between the tooth germ and the oral epithelium. The dental stalk remained in contact with the oral epithelium throughout tooth development up to eruption when connective tissue and numerous capillaries progressively invaded the dental stalk. The buccal side of the dental stalk underwent keratinisation and became part of the gingival epithelium, while most of the lingual cells underwent programmed cell death and the tissue directly above the erupting tooth was shed into the oral cavity.

  1. Identification of Protocadherin 18-like Protein in Horse Molar Cementum

    OpenAIRE

    深澤, 加與子; 佐原, 紀行; 森山, 敬太; 久野, 知子; 藤井, 慈貴; 音琴, 淳一; 太田, 紀雄; 宇田川, 信之; 矢ケ﨑, 裕; 小澤, 英浩

    2005-01-01

    Cementum plays an important role in tooth regeneration; however, the organization system has not yet been clarified. We have studied odontoclastic resorption in human deciduous teeth, and found that the cementum completely covers the enamel tissues of horse molar teeth. In order to study the regeneration system ofcementum, an EDTA soluble fraction extracted from horse cementum was analyzed. The 30 kDa protein was isolated from the EDTA fraction of horse cementum by hydroxyapatite chromatograp...

  2. Radicular cyst in deciduous maxillary molars: a rarity.

    Science.gov (United States)

    Shetty, Shibani; Angadi, Punnya V; Rekha, K

    2010-03-01

    Radicular cyst arising from deciduous teeth is exceedingly rare accounting for radicular cysts. A total of 122 cases have been reported to date in the English language literature. We present a rare case of a radicular cyst associated with a decayed deciduous maxillary molar tooth without any history of prior pulp therapy. Our aim is to emphasize the recognition of inflammatory radicular lesions associated with deciduous teeth which may adversely impact underlying permanent successor.

  3. Nutrient Composition and Phytate-Zinc Molar Ratio of Prepared ...

    African Journals Online (AJOL)

    High calcium foods include kulikuli (871.08mg/100g), akara (296.13mg/100g) and fufu a wet cassava meal (255.31mg/100g). kulikuli was also high in iron and zinc ... Phytate-zinc molar ratios of the prepared dishes were <10 indicating that the bioavailability of zinc consumed in these rural dishes is not likely to be impaired.

  4. Anxiety before extraction of impacted lower third molars.

    Science.gov (United States)

    Tarazona, Beatriz; Tarazona-Álvarez, Pablo; Peñarrocha-Oltra, David; Rojo-Moreno, Juan; Peñarrocha-Diago, Maria

    2015-03-01

    Assess levels of trait anxiety, state anxiety and dental anxiety before extraction of lower third molars and check the correlation and reliability of the scales used for the measurement of preoperative anxiety. A prospective study of patients treated with extraction of a lower third molar between September 2010 to December 2010 was carried out. A total of 125 patients were included in the study. All of them were patients of the Oral Surgery and Implantology Department (Valencia University Medical and Dental School, Valencia, Spain). Before surgery, patients had to complete a preoperative protocol with 4 scales: the STAI-T (State-Trait Anxiety Inventory-Trait) for measuring trait anxiety, the STAI-S (State-Trait Anxiety Inventory-State) for measuring state anxiety, and DAS (Dental anxiety Scale of N. Corah) and APAIS (Amsterdam Preoperative anxiety and Information Scale) for measuring dental anxiety. Patients undergoing extractions of an impacted lower third molar showed low levels of trait anxiety and moderate levels of state anxiety and dental anxiety. Higher levels of trait anxiety were obtained for older patients. Women had higher mean levels of dental anxiety and state anxiety that men with a statistically significant difference in STAI-S scales, DAS, and APAIS. Patients with higher trait anxiety and state anxiety showed higher levels of dental anxiety. A significant correlation (p ≤ 0.01) (p = 0.00) was found between the four scales used to measure anxiety. The scale showed higher correlation was STAI-S scale. The 4 scales showed high reliability (α of C.> 0.80). Patients with highest levels of trait anxiety and state anxiety, had more dental anxiety. The STAI-T, STAI-S, DAS and APAIS scales provided useful information about anxiety before the extraction of lower impacted third molars. The STAI-S is the scale with highest correlation and reliability.

  5. Diagnosis of Proximal Caries in Primary Molars with DIAGNOdent pen

    OpenAIRE

    Ermler, Romy

    2010-01-01

    Proximal surfaces, together with fissures, are the areas where most primary caries occur. Due to the anatomy of the deciduous molars, proximal caries cannot be detected at an early stage in crowded teeth by simply using a mirror and probe. Therefore, additional methods to find early proximal caries have to be used. KaVo uses laser fluorescence to detect caries. Originally, the DIAGNOdent devices were able to detect only occlusal caries (56, 61, 62, 65, 66). New results are now also available ...

  6. Neurological manifestations of excessive alcohol consumption.

    Science.gov (United States)

    Planas-Ballvé, Anna; Grau-López, Laia; Morillas, Rosa María; Planas, Ramón

    2017-12-01

    This article reviews the different acute and chronic neurological manifestations of excessive alcohol consumption that affect the central or peripheral nervous system. Several mechanisms can be implicated depending on the disorder, ranging from nutritional factors, alcohol-related toxicity, metabolic changes and immune-mediated mechanisms. Recognition and early treatment of these manifestations is essential given their association with high morbidity and significantly increased mortality. Copyright © 2017 Elsevier España, S.L.U., AEEH y AEG. All rights reserved.

  7. Interfacial Properties of Methylcelluloses: The Influence of Molar Mass

    Directory of Open Access Journals (Sweden)

    Pauline L. Nasatto

    2014-12-01

    Full Text Available The interfacial interactions of four methylcelluloses having the same average degree of substitution and distribution of methyl groups, but different molar masses, are studied at ambient temperature and at very low polymer concentrations. Firstly, the surface tension σ at the water/air interface is determined for the progressive addition of methylcellulose up to 100 mg/L; σ starts to decrease over 1 mg/L up to the critical aggregation concentration (CAC at 10 mg/L. The curves describing the influence of polymer concentration on σ are independent of the molar mass at equilibrium. Secondly, the adsorption of methylcellulose on silica particles is estimated from ζ-potential measurements. The data are interpreted in terms of an increase of the adsorbed layer thickness at the interface when the molar mass of methylcellulose increases. It is concluded that methylcellulose is adsorbed, forming trains and loops at the interface based on the equilibrium between surface free energy and solvent quality.

  8. 3-D diagnosis-assisted management of anomalous mandibular molar

    Directory of Open Access Journals (Sweden)

    Neelam Mittal

    2012-01-01

    Full Text Available This case report describes the successful non-surgical endodontic management of carious exposed three-rooted mandibular molar with four root canals detected on the pre-operative radiograph taken with 20 degrees mesial angulation and confirmed with a 64-slice helical computed tomography scan-assisted 3-D-reconstructed images. Access cavity shape was modified to locate the extra canal with respect to the distolingual root in the left mandibular first molar. Copious irrigation was accomplished with 5.25% sodium hypochlorite and 17% EDTA. Biomechanical preparation was done using protapers. Calcium hydroxide dressing was done for 1 week. The tooth was obturated using gutta percha and AH 26 root canal sealer, and it was permanently restored with composite. Clinical examination on follow-up visits revealed no sensitivity to percussion and palpation in the left mandibular first molar. Thorough knowledge of root canal variations and use of advanced diagnostic modalities lead to successful non-surgical management of the complex cases.

  9. Posterior Open Bite Due to Failure of Maxillary Molar Eruption.

    Science.gov (United States)

    Yasumura, Toshihiko; Sueishi, Kenji

    2016-01-01

    Posterior open bite can cause problems with occlusion. It arises from systemic or local factors such as physical or functional interference, ankylosis, and failure of eruption. Primary failure of eruption (PFE) is a rare condition that is difficult to differentiate from ankylosis and requires complex treatment strategies. Here we report a 12-year-old girl who was referred to our hospital by her dentist for re-evaluation of eruption failure of the left maxillary secondary premolar and first and second molars with congenitally missing maxillary lateral teeth. The maxillary first molar was extracted for a therapeutic diagnosis. The left maxillary secondary premolar and second molar reacted well to subsequent orthodontic treatment. Auto-transplantation of the mandibular premolar to the maxil-lary arch was carried out to achieve optimal overjet, overbite, and occlusion. The active treatment period spanned 4 years and 1 month. Assessment of the patient's medical and dental history, prior trauma, and clinical conditions resulted in a therapeutic diagnosis of PFE. Satisfactory orthodontic treatment results were achieved.

  10. Molar macrowear reveals Neanderthal eco-geographic dietary variation.

    Directory of Open Access Journals (Sweden)

    Luca Fiorenza

    Full Text Available Neanderthal diets are reported to be based mainly on the consumption of large and medium sized herbivores, while the exploitation of other food types including plants has also been demonstrated. Though some studies conclude that early Homo sapiens were active hunters, the analyses of faunal assemblages, stone tool technologies and stable isotopic studies indicate that they exploited broader dietary resources than Neanderthals. Whereas previous studies assume taxon-specific dietary specializations, we suggest here that the diet of both Neanderthals and early Homo sapiens is determined by ecological conditions. We analyzed molar wear patterns using occlusal fingerprint analysis derived from optical 3D topometry. Molar macrowear accumulates during the lifespan of an individual and thus reflects diet over long periods. Neanderthal and early Homo sapiens maxillary molar macrowear indicates strong eco-geographic dietary variation independent of taxonomic affinities. Based on comparisons with modern hunter-gatherer populations with known diets, Neanderthals as well as early Homo sapiens show high dietary variability in Mediterranean evergreen habitats but a more restricted diet in upper latitude steppe/coniferous forest environments, suggesting a significant consumption of high protein meat resources.

  11. A Neanderthal lower molar from Stajnia Cave, Poland.

    Science.gov (United States)

    Dąbrowski, P; Nowaczewska, W; Stringer, C B; Compton, T; Kruszyński, R; Nadachowski, A; Stefaniak, K; Urbanowski, M

    2013-04-01

    The primary aim of this study was to conduct a taxonomic assessment of the second of three isolated human teeth found in the Stajnia Cave (north of the Carpathians, Poland) in 2008. The specimen was located near a human tooth (S5000), which was identified by Urbanowski et al. (2010) as a Neanderthal permanent upper molar. Both of these teeth were excavated from the D2 layer, which belongs to the D stratigraphic complex comprising the archaeological assemblage associated with the Micoquian tradition. An Ursus spelaeus bone and Mammuthus primigenius tooth that were also excavated from the D2 layer were dated to >49,000 years BP (by AMS (14)C) and 52.9 ka BP (by U-Th), respectively. The sediment overlying stratigraphic complex D was dated to 45.9 ka BP by the OSL method. The S4300 tooth is a lower first or second permanent molar belonging to an individual other than that who once possessed the S5000 tooth. The S4300 tooth exhibits a combination of traits typical of Neanderthal lower molars, including a mid-trigonid crest, large anterior fovea, taurodontism and subvertical grooves on the interproximal face, indicating that this tooth belonged to a Neanderthal individual. The S4300 tooth from Stajnia Cave is one of the oldest human remains found in Poland. Copyright © 2013 Elsevier GmbH. All rights reserved.

  12. Molar Macrowear Reveals Neanderthal Eco-Geographic Dietary Variation

    Science.gov (United States)

    Fiorenza, Luca; Benazzi, Stefano; Tausch, Jeremy; Kullmer, Ottmar; Bromage, Timothy G.; Schrenk, Friedemann

    2011-01-01

    Neanderthal diets are reported to be based mainly on the consumption of large and medium sized herbivores, while the exploitation of other food types including plants has also been demonstrated. Though some studies conclude that early Homo sapiens were active hunters, the analyses of faunal assemblages, stone tool technologies and stable isotopic studies indicate that they exploited broader dietary resources than Neanderthals. Whereas previous studies assume taxon-specific dietary specializations, we suggest here that the diet of both Neanderthals and early Homo sapiens is determined by ecological conditions. We analyzed molar wear patterns using occlusal fingerprint analysis derived from optical 3D topometry. Molar macrowear accumulates during the lifespan of an individual and thus reflects diet over long periods. Neanderthal and early Homo sapiens maxillary molar macrowear indicates strong eco-geographic dietary variation independent of taxonomic affinities. Based on comparisons with modern hunter-gatherer populations with known diets, Neanderthals as well as early Homo sapiens show high dietary variability in Mediterranean evergreen habitats but a more restricted diet in upper latitude steppe/coniferous forest environments, suggesting a significant consumption of high protein meat resources. PMID:21445243

  13. Variable permanent mandibular first molar: Review of literature

    Science.gov (United States)

    Ballullaya, Srinidhi V; Vemuri, Sayesh; Kumar, Pabbati Ravi

    2013-01-01

    Introduction: The success of root canal therapy depends on the locations of all the canals, thourough debridement and proper sealing. At times the clinicians are challenged with variations in morphology of root canal. This review article attempts to list out all the variations of permanent mandibular first molar published so for in the literature. Materials and Methods: An exhaustive search was undertaken using PUBMED database to identify published literature from 1900 to 2010 relating to the root canal morphology of permanent first molar by using key words. The selected artcles were obtained and reviewed. Results: Total ninty seven articles were selected out of which 50 were original article and forty seven were case reports. The incidence of third canal in mesial root was 0.95% to 15%. The incidence of three rooted mandibular first molar was 3% to 33%. Only ninety cases reported with c-shape canal configuration. Incidence of Taurodintism without congenital disorder was very rare. Conclusion: The root canal treatment requires proper knowlegde of variations in root canal morphology in order to recognise, disinfect and seal all portal of exit. This can be accomplished with proper diagnosis using newer modes, modification in access preparation, use of operating microscope, enhanced methods of disinfecting and sealing of all canals. PMID:23716959

  14. Changes in maxillary molar pulp blood flow during orthodontic intrusion.

    Science.gov (United States)

    Sabuncuoglu, Fidan Alakus; Ersahan, Seyda

    2014-11-01

    The aim of this prospective study was to evaluate the effects of maxillary first molar intrusion on pulpal blood flow (PBF) in humans as recorded by laser Doppler flowmetry (LDF). Maxillary first molars of 16 participants were divided into two groups. In the study group, 20 teeth in 10 participants were subjected to an intrusive force of 100 g delivered from mini-implants for 6 months. A control group of 6 subjects (12 teeth) received no orthodontic treatment. LDF measurements were recorded at baseline and at 3 days, 3 weeks, 3 months and 6 months during intrusion. Data was analysed using the Wilcoxon Signed Rank and Mann-Whitney U tests, with a level of p intrusion with mini-implants and an applied force of 100 g, blood vessel function was maintained throughout intrusion, as indicated by LDF measurements of PBF, which tended to return to baseline values by the end of the observation period. These results highlight the changes that can occur in molar vascularity, especially during six months of intrusion.

  15. The Use of Narrow Diameter Implants in the Molar Area

    Directory of Open Access Journals (Sweden)

    M. Saad

    2016-01-01

    Full Text Available Implant rehabilitations in the posterior jaw are influenced by many factors such as the condition of the remaining teeth, the force factors related to the patient, the quality of the bone, the maintenance of the hygiene, the limited bone height, the type and extent of edentulism, and the nature of the opposing arch. The gold standard is to place a regular diameter implant (>3.7 mm or a wide one to replace every missing molar. Unfortunately, due to horizontal bone resorption, this option is not possible without lateral bone augmentation. In this situation, narrow diameter implant (NDI < 3.5 mm could be the alternative to lateral bone augmentation procedures. This paper presents a clinical study where NDIs were used for the replacement of missing molars. They were followed up to 11 years. Special considerations were observed and many parameters were evaluated. NDI could be used to replace missing molar in case of moderate horizontal bone resorption if strict guidelines are respected. Yet, future controlled prospective clinical trials are required to admit their use as scientific evidence.

  16. Third molar-related morbidity in deployed Service personnel.

    Science.gov (United States)

    Combes, J; McColl, E; Cross, B; McCormick, R J

    2010-08-28

    The minimisation of disease and non-battle injury (DNBI) is essential for maintaining efficiency in a fighting force. Third molar-related morbidity is a common cause of DNBI. With extended lines of communication in current military deployments, travelling for dental care is often subject to significant danger. Military dental officers in Afghanistan and Iraq recorded data on patients presenting with third molar pathology. Related previous history was obtained from the individual and from the military dental records. Three hundred and three individuals presented during the 23 month study period; 27.7% were unable to access care immediately, most commonly citing work pressure or lack of safe transport. Of those needing to travel, 70% were moved by helicopter. Pericoronitis was diagnosed in 84.4% of cases, 20.6% of these teeth being extracted; 53.5% of patients reported no prior symptoms, 22.7% with two or more episodes. There was documented evidence in military dental records of previous problems in 29.2% of cases. 11.3% had previously been listed for extraction of the presenting tooth. Dental treatment for troops in combat situations is fraught with difficulty. Special consideration must be given to the management of third molars in military personnel.

  17. Tendon rupture associated with excessive smartphone gaming.

    Science.gov (United States)

    Gilman, Luke; Cage, Dori N; Horn, Adam; Bishop, Frank; Klam, Warren P; Doan, Andrew P

    2015-06-01

    Excessive use of smartphones has been associated with injuries. A 29-year-old, right hand-dominant man presented with chronic left thumb pain and loss of active motion from playing a Match-3 puzzle video game on his smartphone all day for 6 to 8 weeks. On physical examination, the left extensor pollicis longus tendon was not palpable, and no tendon motion was noted with wrist tenodesis. The thumb metacarpophalangeal range of motion was 10° to 80°, and thumb interphalangeal range of motion was 30° to 70°. The clinical diagnosis was rupture of the left extensor pollicis longus tendon. The patient subsequently underwent an extensor indicis proprius (1 of 2 tendons that extend the index finger) to extensor pollicis longus tendon transfer. During surgery, rupture of the extensor pollicis longus tendon was seen between the metacarpophalangeal and wrist joints. The potential for video games to reduce pain perception raises clinical and social considerations about excessive use, abuse, and addiction. Future research should consider whether pain reduction is a reason some individuals play video games excessively, manifest addiction, or sustain injuries associated with video gaming.

  18. [Mortality attributable to excess weight in Spain].

    Science.gov (United States)

    Martín-Ramiro, José Javier; Álvarez-Martín, Elena; Gil-Prieto, Ruth

    2014-06-16

    Estimate the mortality attributable to higher than optimal body mass index in the Spanish population in 2006. Excess body weight prevalence data were obtained from the 2006 National Health Survey, while data on associated mortality were extracted from the National Statistic Institute. Population attributable fractions were applied and mortality attributable to higher than optimal body mass index was calculated for people between 35 and 79 years. In 2006, among the Spanish population aged 35-79 years, 25,671 lives (16,405 males and 9,266 women) were lost due to higher than optimal body mass index. Mortality attributable was 15.8% of total deaths in males and 14.8% in women, but if we refer to those causes where excess body weight is a risk factor, it is about a 30% of mortality (31.6% in men and 28% in women). The most important individual cause was cardiovascular disease (58%), followed by cancer. The individual cause with a major contribution to deaths was type 2 diabetes; nearly 70% in males and 80% in women. Overweight accounted for 54.9% deaths in men and 48.6% in women. Excess body weight is a major public health problem, with an important associated mortality. Attributable deaths are a useful tool to know the real situation and to monitor for disease control interventions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  19. Earnings Quality Measures and Excess Returns.

    Science.gov (United States)

    Perotti, Pietro; Wagenhofer, Alfred

    2014-06-01

    This paper examines how commonly used earnings quality measures fulfill a key objective of financial reporting, i.e., improving decision usefulness for investors. We propose a stock-price-based measure for assessing the quality of earnings quality measures. We predict that firms with higher earnings quality will be less mispriced than other firms. Mispricing is measured by the difference of the mean absolute excess returns of portfolios formed on high and low values of a measure. We examine persistence, predictability, two measures of smoothness, abnormal accruals, accruals quality, earnings response coefficient and value relevance. For a large sample of US non-financial firms over the period 1988-2007, we show that all measures except for smoothness are negatively associated with absolute excess returns, suggesting that smoothness is generally a favorable attribute of earnings. Accruals measures generate the largest spread in absolute excess returns, followed by smoothness and market-based measures. These results lend support to the widespread use of accruals measures as overall measures of earnings quality in the literature.

  20. Measurements and analysis of excess enthalpies of ester + n-alkane using the UNIFAC model

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, J. (Escuela Superior de Ingenieros Industriales, Las Palmas (Spain). Catedra de Termodinamica y Fisicoquimica); Legido, J.L.; Fernandez, J.; Pias, L.; Paz Andrade, M.I. (Universidad de Santiago de Compostela (Spain). Dept. de Fisica Aplicada)

    1991-02-01

    We present new experimental data of the excess molar enthalpies at 298.15 K for eighteen different binary mixtures of nine methyl alkanoates (ethanoate to decanoate) with n-heptane and n-undecane. The results show that all the systems are endothermic, h{sup E} values increase with the length of the n-alkane and decrease with the length of the methyl ester. The data have been analysed with a version of the UNIFAC model, and the parameters corresponding to the CH{sub 2}/COOC interaction have been recalculated using a larger base of experimental data. New values for the CH{sub 2}/COO interaction parameters have been obtained. (orig.).

  1. A method for estimating both the solubility parameters and molar volumes of liquids

    Science.gov (United States)

    Fedors, R. F.

    1974-01-01

    Development of an indirect method of estimating the solubility parameter of high molecular weight polymers. The proposed method of estimating the solubility parameter, like Small's method, is based on group additive constants, but is believed to be superior to Small's method for two reasons: (1) the contribution of a much larger number of functional groups have been evaluated, and (2) the method requires only a knowledge of structural formula of the compound.

  2. Vertical bone growth following autotransplantation of the developing maxillary third molar to replace a retained mandibular permanent molar: a case report.

    Science.gov (United States)

    Plakwicz, Paweł; Czochrowska, Ewa Monika; Milczarek, Anna; Zadurska, Malgorzata

    2014-01-01

    A retained permanent mandibular first molar caused arrested development and a defect of the alveolar bone in a 16-year-old girl. Extraction of the ankylosed tooth was immediately followed by autotransplantation of the developing maxillary third molar. At the 3-year follow-up examination the interproximal bone level at the autotransplanted molar was equal to that of the neighboring teeth. Cone beam computed tomography showed bone at the labial aspect of the transplant. The eruption of the autotransplanted tooth stimulated vertical alveolar bone development and repaired the bone defect. Additionally, there was closure of the posterior open bite that was initially present at the ankylosed molar site.

  3. Enamel pits in hamster molars, formed by a single high fluoride dose, are associated with a perturbation of transitional stage ameloblasts.

    Science.gov (United States)

    Lyaruu, D M; Vermeulen, L; Stienen, N; Bervoets, T J M; Denbesten, P K; Bronckers, A L J J

    2012-01-01

    Excessive intake of fluoride (F) by young children results in the formation of enamel subsurface porosities and pits, called enamel fluorosis. In this study, we used a single high dose of F administered to hamster pups to determine the stage of ameloblasts most affected by F and whether pit formation was related to F-related sub-ameloblastic cyst formation. Hamster pups received a single subcutaneous injection of either 20 mg or 40 mg NaF/kg body weight, were sacrificed 24 h later, and the number of cysts formed in the first molars were counted. Other pups were sacrificed 8 days after F injection, when the first molars had just erupted, to score for enamel defects. All F-injected pups formed enamel defects in the upper half of the cusps in a dose-dependent way. After injection of 20 mg NaF/kg, an average of 2.5 white spots per molar was found but no pits. At 40 mg NaF/kg, almost 4.5 spots per molar were counted as well as 2 pits per molar. The defects in erupted enamel were located in the upper half of the cusps, sites where cysts had formed at the transition stage of ameloblast differentiation. These results suggest that transitional ameloblasts, located between secretory- and maturation-stage ameloblasts, are most sensitive to the effects of a single high dose of F. F-induced cysts formed earlier at the pre-secretory stage were not correlated to either white spots or enamel pits, suggesting that damaged ameloblasts overlying a F-induced cyst regenerate and continue to form enamel. Copyright © 2012 S. Karger AG, Basel.

  4. Mercury and selenium in European catfish (Silurus glanis) from Northern Italian Rivers: can molar ratio be a predictive factor for mercury toxicity in a top predator?

    Science.gov (United States)

    Squadrone, S; Benedetto, A; Brizio, P; Prearo, M; Abete, M C

    2015-01-01

    The study of mercury and selenium bioaccumulation in fish is crucially important for evaluating the extent of contamination in freshwater environments, and the possible health risk posed for humans when the antagonistic interactions of these two elements are considered. Several factors affect the risk of mercury intake from fish consumption, including mercury levels, human consumption patterns, and sensitive populations (e.g., pregnant women, foetuses, young children and unknown genetic factors). The protective effects of selenium on mercury toxicity have been extensively publicised in recent years, particularly targeting fish consumers. In this study, mercury (Hg) and selenium (Se) concentrations were determined in the muscle of European catfish (Silurus glanis) collected from North Italian Rivers. Differences in mercury and selenium levels, as a function of size, gender and location were investigated. Hg was strongly related to length, gender and location, while Se levels are not dependent on fish size or location. The mean Se/Hg molar ratio was strongly affected by location, and significantly related to length and age. Selenium was in molar excess of mercury in all sites, with a rank order of mean Se/Hg molar ratio of the Parma River (2.55)>Po River (1.71)>Tanaro River (1.66)>Bormida River (1.36). However, in 37% of analyzed samples, Hg exceeded the maximum level set by 1881/2006/EC and 629/2008/EC in fish muscle. The molar ratio of Se/Hg was 0.5mg/kg), and therefore the mean molar ratio cannot be considered as a safety criterion in top predator fish. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Avaliação ortopantomográfica das angulações mesiodistais de caninos, pré-molares e molares inferiores com e sem a presença dos terceiros molares Panoramic evaluation of the mesiodistal angulations of canine teeth, premolar and inferior molars with and without the presence of the third molars

    Directory of Open Access Journals (Sweden)

    Rodrigo Castellazzi Sella

    2009-12-01

    Full Text Available OBJETIVOS: comparar os valores médios normais das angulações mesiodistais dentárias, propostos por Ursi, em 1989, com as angulações mesiodistais de caninos, pré-molares e molares inferiores em indivíduos com e sem a presença dos terceiros molares inferiores e idades entre 18 e 25 anos. Além disso, foram comparados os valores das angulações mesiodistais desses dentes nessas duas situações. MÉTODOS: foram utilizadas 40 radiografias ortopantomográficas de indivíduos, de ambos os gêneros, que não receberam tratamento ortodôntico, divididos em dois grupos: Grupo I, constituído por 20 radiografias que não apresentavam os terceiros molares inferiores; e Grupo II, formado por 20 radiografias com os terceiros molares inferiores presentes. RESULTADOS E CONCLUSÕES: a análise dos resultados e a análise estatística permitiram concluir que ambos os grupos exibiram pré-molares e molares inferiores mais angulados em sentido mesial, quando comparados à oclusão normal. Por outro lado, a angulação mesiodistal de caninos inferiores mostrou-se semelhante àquela apresentada em casos de oclusão normal. Os dois grupos, quando comparados entre si, exibiram semelhantes valores angulares dos caninos, pré-molares e molares inferiores, de modo que a presença dos terceiros molares não exerceu influência sobre essas angulações mesiodistais dentárias.AIM: To compare the normal mean values of the mesiodistal axial angulation, proposed by Ursi in 1989, with the mesiodistal axial angulation of canine teeth, premolar and inferior molars in individuals with and without the presence of the third inferior molars and ages between 18 and 25 years. Besides, the values of the mesiodistal axial angulation of these teeth were compared in these two situations. METHODS: Forty panoramic x-rays were used from individuals of both genders that didn't receive orthodontic treatment, divided in two groups: Group I, constituted by 20 x-rays that didn't present

  6. Restauraciones cerámicas en molares jóvenes con endodoncia Ceramics restorations in young molars with endodontic

    OpenAIRE

    M. Urdaneta Quintero; L. Yánez de Meléndez; J. Álvarez Zárraga; M. Jimeno Jiménez; C. Soto Mestre

    2009-01-01

    Objetivo: Efectuar restauraciones cerámicas Cerec (feldespática y de dióxido de circonio) en molares jóvenes con endodoncia, para prevenir complicaciones en el aparato estomatognático por la pérdida de estos dientes. Material y métodos: Se describe la confección de restauraciones cerámicas a nivel de la zona molar mandibular derecha de un paciente del género femenino de 18 años de edad, a quien se le realizó radiografía periapical, por presentar dolor espontáneo en el lado derecho mandibular....

  7. Micro-computed tomography evaluation of the preparation of mesiobuccal root canals in maxillary first molars with Hyflex CM, Twisted Files, and K3 instruments.

    Science.gov (United States)

    Zhao, Dan; Shen, Ya; Peng, Bin; Haapasalo, Markus

    2013-03-01

    The aim of this study was to describe the canal shaping properties of Hyflex CM, Twisted Files (TF), and K3 rotary nickel-titanium files by using micro-computed tomography in maxillary first molars. A total of 36 mesiobuccal root canals of maxillary first molars were prepared with Hyflex CM, TF, or K3 system. Micro-computed tomography was used to scan the specimens before and after instrumentation. The volume of untreated canal, volume of dentin removed after preparation, amount of uninstrumented area, and the transportation for the coronal, middle, and apical thirds of canals were measured. Instrumentation of canals increased their volume and surface area. TF group showed the greatest amount of volumetric dentin removal (P Hyflex CM and K3 groups. There were no significant differences among instrument types concerning uninstrumented area. The TF system produced significantly less transportation than the K3 system in the apical third of canals. No significant difference was found between TF and Hyflex CM instruments relating to apical transportation. In vitro, Hyflex and TF instruments shaped curved root canals in maxillary first molar without significant shaping errors. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

  8. Preformed metal crowns for decayed primary molar teeth.

    Science.gov (United States)

    Innes, N P T; Ricketts, D N J; Evans, D J P

    2007-01-24

    Preformed metal crowns (PMCs) are recommended by the British Society of Paediatric Dentistry (BSPD) for restoring badly broken down primary molar teeth. However, few dental practitioners adopt this technique in clinical practice, citing cost and clinical difficulty as reasons for this. Whilst there is a subjective impression by clinical academics that PMCs provide a more durable restoration than filling materials, there appears to be little evidence within the literature to support this. The primary aim of this systematic review was to compare clinical outcomes for primary molar teeth restored using PMCs compared to those restored with filling materials. The literature was searched using: the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2005, Issue 3); MEDLINE (1966 to August 2005); EMBASE (1980 to August 2005); System for Information on Grey Literature in Europe (SIGLE) (1976 to August 2005). Relevant publications' reference lists were reviewed for relevant articles. The most recent search was carried out on 24 August 2005. Randomised controlled trials (RCTs) that assessed the effectiveness of PMCs compared with filling materials or where there had been no treatment in children with untreated tooth decay in one or more primary molar teeth. Two review authors independently assessed the title and abstracts for each article from the search results to decide whether it was likely to be relevant. Full papers were obtained for relevant articles and all three review authors studied these. Forty-seven records were retrieved by the search strategies of which some were duplicates. Of these, 14 studies were scrutinised. No studies met the inclusion criteria and six studies were excluded from the review as they were either retrospective in design or reported as prospective outcomes but not randomised. No data were available for extraction and analysis and therefore, no conclusion could be made as to whether PMCs were more successful than

  9. X-RAY MEASUREMENTS OF IMPACTED MANDIBULAR THIRD MOLARS

    Directory of Open Access Journals (Sweden)

    Petya G. Kanazirska

    2017-03-01

    Full Text Available The X-ray diagnostics is essential in case of retention of teeth. An important condition for proper treatment plan for impacted third molars of the mandible is the determination of the type of retention in the jaw in accordance with their medio-distal inclination and the space available for eruption (retromolar space. Purpose: The purpose of this article is to present an objective method for determination of the medio-distal inclination and the space for eruption of the third molars of the mandible. Materials and methods: The studied patients with impacted third molars of the mandible are 127, aged 17 through 60. They were examined with Cone-beam Computed Tomography (CBCT. On the orthopantomography, obtained after the scanning as a reconstructed image, we defined the medio-distal inclination and space for eruption of the third molars of the mandible. For this purpose, we summarized several methods. Results: The most common inclination of the third molars of the mandible with retained eruption is the medial one at 120 teeth (61.5% ± 3.5. Second in frequency is the vertical one-34 teeth (17.4% ± 2.7, followed by the distal inclination– 21 teeth (10.8% ± 2.2. With the lowest frequency are the teeth which are positioned horizontally –20 teeth (10.3% ± 2.2. Shortage of retromolar space is established for173 teeth (88.7% ± 2.3. In 22 teeth (11.3% ± 2.3 there is enough space in the jaw for eruption. Conclusion: An objective method for determination of the medio-distal inclination of the teeth and the space available for eruption is introduced for the first time in Bulgaria. By determining the inclination of impacted wisdom teeth under this methodology one can avoid the subjective factor–the seventh tooth. It is not a reference plane, because it can also be tilted or missing. With the help of the developed method the retromolar point can be determined more objectively.

  10. Delayed onset infections after lower third molar germectomy could be related to the space distal to the second molar.

    Science.gov (United States)

    Monaco, G; Cecchini, S; Gatto, M R; Pelliccioni, G A

    2017-03-01

    The onset of delayed infection after lower third molar germectomy is influenced by the amount of distal space. This retrospective study aimed to determine whether the incidence of delayed onset infection is related to the space distal to the second molar. The ratio between the distal space and the crown width, measured according to the Ganss protocol on panoramic radiographs, was obtained for 218 surgical germectomies performed for orthodontic reasons in 134 patients. A delayed onset infection occurred following 20 germectomies at between 2 and 8 weeks after surgery; purulent exudates from the alveolus and swelling were present. In 16 of the 20 cases of infection, a Ganss ratio of <0.5 showed the almost complete absence of space distal to the second molar. This study found that the distal space was significantly and inversely correlated with delayed onset infection (P=0.004). From a clinical point of view, it is important for the surgeon to be aware that a higher Ganss ratio may indicate that a delayed onset infection is less likely to occur and that a lower Ganss ratio could indicate a greater likelihood of this type of infection, so that the patient can be properly informed. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  11. Compensation trends of the angulation of first molars: retrospective study of 1 403 malocclusion cases

    Science.gov (United States)

    Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

    2014-01-01

    We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1 403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged 16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability. PMID:24699185

  12. Assessment of the relationship between the maxillary molars and adjacent structures using cone beam computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yun Hoa; Cho, Bong Hae [Dept. of Oral and Maxillofacial Radiology, College of Dentistry, Pusan National University, Yangsan (Korea, Republic of)

    2012-09-15

    This study investigated the relationship between the roots of the maxillary molars and the maxillary sinus using cone beam computed tomography (CBCT), and measured the distances between the roots of the maxillary molars and the sinus floor as well as the thickness of the bone between the root and the alveolar cortical plate. The study sample consisted of 83 patients with normally erupted bilateral maxillary first and second molars. A total of 332 maxillary molars were examined using CBCT images. The vertical relationship of each root with the maxillary sinus was classified into four types on CBCT cross-sectional images. The distance between the sinus floor and root and the bone thickness between the root and alveolar cortical plate were measured. In the buccal roots of the maxillary molars, a root protruding into the sinus occurred most frequently. A root projecting laterally along the sinus cavity was most common in the palatal roots of the maxillary first molars. The mesiobuccal roots of the maxillary second molar were closest to the sinus. The mesiobuccal roots of the first molars were closest to the cortical plate. The relationship between the roots of the maxillary molars and the sinus differed between the buccal and palatal roots. A root protruding into the sinus occurred more frequent in the buccal roots of the maxillary molars. The mesiobuccal root of the maxillary second molar was closest to the maxillary sinus floor and farthest from the alveolar cortical plate.

  13. Intrusion of overerupted maxillary molars with miniscrew implant anchorage: a radiographic evaluation.

    Science.gov (United States)

    Xun, Chun-lei; Zhao, Hong; Zeng, Xiang-long; Wang, Xing

    2013-10-01

    The aim of this retrospective study was to quantitatively evaluate the treatment effects of intrusion of overerupted maxillary molars using miniscrew implant anchorage and to investigate the apical root resorption after molar intrusion. The subjects included 30 patients whose average ages were 35.5±9.0 years. All patients had received intrusion treatments for overerupted maxillary molars with miniscrew anchorage. There were 38 maxillary first molars and 26 maxillary second molars to be intruded. Two miniscrews were inserted in the buccal and palatal alveolar bone mesial to the overerupted molar. Force of 100-150 g was applied by the elastic chains between screw head and attachment on each side. Lateral cephalograms and panoramic radiographs taken before and after intrusion were used to evaluate dental changes and root resorption of molars. Only 6 of the 128 miniscrews failed. The first and second molars were significantly intruded by averages of 3.4 mm and 3.1 mm respectively (Pintrusion time was more than 6 months. The crown of the molars mesially tilted by averages of 3.1 degrees and 3.3 degrees (Pintrusion treatment of overerupted molars with miniscrew anchorages could be used as an efficient and reliable method to recover lost restoration space for prosthesis. Radiographically speaking, root resorption of molars was not clinically significant after application of intrusive forces of 200 to 300 g.

  14. Mesial inclination of impacted third molars and its propensity to stimulate external root resorption in second molars--a cone-beam computed tomographic evaluation.

    Science.gov (United States)

    Oenning, Anne Caroline Costa; Melo, Saulo Leonardo Sousa; Groppo, Francisco Carlos; Haiter-Neto, Francisco

    2015-03-01

    To investigate the presence of external root resorption (ERR) in second molars adjacent to horizontally and mesioangular impacted mandibular third molars by cone-beam computed tomography. In addition, patient characteristics (age and gender) and third molar depth were correlated with the presence of ERR. The sample consisted of 116 scans (58 acquired on the i-CAT Classic and 58 on the Picasso-Trio) of 70 women and 46 men (mean age, 23.7 yr). Two observers recorded the presence of ERR in the second molars, inclination and depth of third molars in relation to bone and soft tissues, third molars classification according to Pell and Gregory, and location and severity of ERR. Data were analyzed by analysis of variance, Mann-Whitney test, and χ(2) test. The κ test was used to analyze intraobserver agreement. The overall prevalence of ERR was 49.43%. There were no statistically significant differences in the detection of ERR by gender, images from the 2 devices, or third molar inclination (P > .05). The κ test showed excellent reproducibility values (κ = 0.7778). There was a smaller proportion of affected patients 14 to 24 years old and ERR in teeth adjacent to Class C third molars. Mesially inclined third molars (mesioangular and horizontal) have a greater potential of being associated with ERR in second molars, which was shown by the high prevalence of the condition in the overall sample. Class A and B third molars in patients older than 24 years were more associated with the presence of ERR in adjacent teeth. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Management of large class II lesions in molars: how to restore and when to perform surgical crown lengthening?

    Directory of Open Access Journals (Sweden)

    Ana Belén Dablanca-Blanco

    2017-08-01

    Full Text Available The restoration of endodontic tooth is always a challenge for the clinician, not only due to excessive loss of tooth structure but also invasion of the biological width due to large decayed lesions. In this paper, the 7 most common clinical scenarios in molars with class II lesions ever deeper were examined. This includes both the type of restoration (direct or indirect and the management of the cavity margin, such as the need for deep margin elevation (DME or crown lengthening. It is necessary to have the DME when the healthy tooth remnant is in the sulcus or at the epithelium level. For caries that reaches the connective tissue or the bone crest, crown lengthening is required. Endocrowns are a good treatment option in the endodontically treated tooth when the loss of structure is advanced.

  16. Excessive sleep duration and quality of life.

    Science.gov (United States)

    Ohayon, Maurice M; Reynolds, Charles F; Dauvilliers, Yves

    2013-06-01

    Using population-based data, we document the comorbidities (medical, neurologic, and psychiatric) and consequences for daily functioning of excessive quantity of sleep (EQS), defined as a main sleep period or 24-hour sleep duration ≥ 9 hours accompanied by complaints of impaired functioning or distress due to excessive sleep, and its links to excessive sleepiness. A cross-sectional telephone study using a representative sample of 19,136 noninstitutionalized individuals living in the United States, aged ≥ 18 years (participation rate = 83.2%). The Sleep-EVAL expert system administered questions on life and sleeping habits; health; and sleep, mental, and organic disorders (Diagnostic and Statistical Manual of Mental Disorders, 4th edition, text revision; International Classification of Sleep Disorders: Diagnostic and Coding Manual II, International Classification of Diseases and Related Health Problems, 10th edition). Sleeping at least 9 hours per 24-hour period was reported by 8.4% (95% confidence interval = 8.0-8.8%) of participants; EQS (prolonged sleep episode with distress/impairment) was observed in 1.6% (1.4-1.8%) of the sample. The likelihood of EQS was 3 to 12× higher among individuals with a mood disorder. EQS individuals were 2 to 4× more likely to report poor quality of life than non-EQS individuals as well as interference with socioprofessional activities and relationships. Although between 33 and 66% of individuals with prolonged sleep perceived it as a major problem, only 6.3 to 27.5% of them reported having sought medical attention. EQS is widespread in the general population, co-occurring with a broad spectrum of sleep, medical, neurologic, and psychiatric disorders. Therefore, physicians must recognize EQS as a mixed clinical entity indicating careful assessment and specific treatment planning. © 2013 American Neurological Association.

  17. First excess levels of vector processes

    Directory of Open Access Journals (Sweden)

    Jewgeni H. Dshalalow

    1994-01-01

    Full Text Available This paper analyzes the behavior of a point process marked by a two-dimensional renewal process with dependent components about some fixed (two-dimensional level. The compound process evolves until one of its marks hits (i.e. reaches or exceeds its associated level for the first time. The author targets a joint transformation of the first excess level, first passage time, and the index of the point process which labels the first passage time. The cases when both marks are either discrete or continuous or mixed are treated. For each of them, an explicit and compact formula is derived. Various applications to stochastic models are discussed.

  18. Association between the presence of a partially erupted mandibular third molar and the existence of caries in the distal of the second molars.

    Science.gov (United States)

    Falci, S G M; de Castro, C R; Santos, R C; de Souza Lima, L D; Ramos-Jorge, M L; Botelho, A M; Dos Santos, C R R

    2012-10-01

    The objective of this study was to verify, using periapical radiographs, whether a partially erupted mandibular third molar is a factor in the presence of dental caries on the distal surface of the adjacent second molar. Two-forty six high quality periapical radiographs were selected, each showing a partially erupted mandibular third molar. The variables analyzed were: tooth number; gender; age; radiographic presence of caries on the distal surface of the adjacent molar; Pell and Gregory classification; Winter classification; angulation and distance between the second and mandibular third molar. The examiners were previously calibrated to collect data (kappa statistics from 0.87 to 1.0). The prevalence rate of caries on the distal surface of the second molar was 13.4%. In the logistical multivariate regression analysis, the angulation (OR=8.5; IC95%: 1.7-43.8; p=0.011) and the gender (OR=3.3; IC95%: 1.4-7.7; p=0.005) remained statistically significant after an age adjustment was made. The results indicate that the presence of a partially erupted mandibular third molar with an angulation of 31 degrees or more, is a risk factor for caries on the distal surface of the mandibular second molars. Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  19. Exodoncia del tercer molar: Factores que determinan complejidad

    Directory of Open Access Journals (Sweden)

    Ivan Manotas Arevalo

    2014-06-01

    Full Text Available ResumenUno de los procedimientos más frecuentes en el campo de la Cirugía Oral es la exodoncia, o extracción dental. La prevención y la promoción de hábitos saludables dentro de los que se cuenta la práctica del cepillado dental, uso de dentífricos, hilo dental y enjuagatorios bucales, además de visitas periódicas de control a especialistas y odontólogos generales e higienistas bucales ha conllevado a una reducción en la perdida de estructuras dentarias por causa de la caries y las periodontopatìas. Sin embargo se mantiene alto el número de exodoncias indicadas por falta de espacio en la estructura de los maxilares para la erupción dental, así como alteraciones en la posición y angulacion de los órganos dentales sobre su eje que impide una adecuada ubicación logrando que se indique su extracción. Dentro de la serie dental los órganos dentarios más frecuentemente afectados por este tipo de alteraciones son los terceros molares. También se mencionan que son esos mismos dientes los que acusan mayor grado de complejidad para realizar el procedimiento de exodoncia, y los que causan mayor grado de morbilidad posquirúrgica en el paciente, con un número mayor de complicaciones y su severidad, descritas en la literatura. (Duazary 2008; 141-147. Este artículo pretende analizar los factores que determinan complejidad en la exodoncia del tercer molar a partir de una revisión bibliografía y comparación de ésta.AbstractOne of the most frequent procedure used in the field of Oral Surgery is extracted, or tooth extraction. The prevention and promoting healthy habits in mind that the practice of brushing teeth, use of toothpastes, mouthwashes and dental floss mouth, in addition to regular monitoring visits to specialists and general dentists and oral hygiene has led to a reduction in the loss of structures caused by tooth decay and periodontal pathology. However remains high number of extractions indicated by lack of space in the

  20. [Disability attributable to excess weight in Spain].

    Science.gov (United States)

    Martín-Ramiro, José Javier; Alvarez-Martín, Elena; Gil-Prieto, Ruth

    2014-08-19

    To estimate the disability attributable to higher than optimal body mass index in the Spanish population in 2006. Excess body weight prevalence data were obtained from the 2006 National Health Survey (NHS), while the prevalence of associated morbidities was extracted from the 2006 NHS and from a national hospital data base. Population attributable fractions were applied and disability attributable was expressed as years life with disability (YLD). In 2006, in the Spanish population aged 35-79 years, 791.650 YLD were lost due to higher than optimal body mass index (46.7% in males and 53.3% in females). Overweight (body mass index 25-29.9) accounted for 45.7% of total YLD. Males YLD were higher than females under 60. The 35-39 quinquennial group showed a difference for males of 16.6% while in the 74-79 group the difference was 23.8% for women. Osteoarthritis and chronic back pain accounted for 60% of YLD while hypertensive disease and type 2 diabetes mellitus were responsible of 37%. Excess body weight is a health risk related to the development of various diseases with an important associated disability burden and social and economical cost. YLD analysis is a useful monitor tool for disease control interventions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  1. Effective interpretations of a diphoton excess

    Energy Technology Data Exchange (ETDEWEB)

    Berthier, Laure [Niels Bohr International Academy & Discovery Center,Niels Bohr Institute, University of Copenhagen,Blegdamsvej 17, DK-2100, Copenhagen (Denmark); Cline, James M. [Niels Bohr International Academy & Discovery Center,Niels Bohr Institute, University of Copenhagen,Blegdamsvej 17, DK-2100, Copenhagen (Denmark); Department of Physics, McGill University,3600 Rue University, Montréal, Québec, H3A 2T8 (Canada); Shepherd, William; Trott, Michael [Niels Bohr International Academy & Discovery Center,Niels Bohr Institute, University of Copenhagen,Blegdamsvej 17, DK-2100, Copenhagen (Denmark)

    2016-04-14

    We discuss some consistency tests that must be passed for a successful explanation of a diphoton excess at larger mass scales, generated by a scalar or pseudoscalar state, possibly of a composite nature, decaying to two photons. Scalar states at mass scales above the electroweak scale decaying significantly into photon final states generically lead to modifications of Standard Model Higgs phenomenology. We characterise this effect using the formalism of Effective Field Theory (EFT) and study the modification of the effective couplings to photons and gluons of the Higgs. The modification of Higgs phenomenology comes about in a variety of ways. For scalar 0{sup +} states, a component of the Higgs and the heavy boson can mix. Lower energy phenomenology gives a limit on the mixing angle, which gets generated at one loop in any theory explaining the diphoton excess. Even if the mixing angle is set to zero, we demonstrate that a relation exists between lower energy Higgs data and a massive scalar decaying to diphoton final states. If the new boson is a pseudoscalar, we note that if it is composite, it is generic to have an excited scalar partner that can mix with a component of the Higgs, which has a stronger coupling to photons. In the case of a pseudoscalar, we also characterize how lower energy Higgs phenomenology is directly modified using EFT, even without assuming a scalar partner of the pseudoscalar state. We find that naturalness concerns can be accommodated, and that pseudoscalar models are more protected from lower energy constraints.

  2. Nonintrusive verification attributes for excess fissile materials

    Energy Technology Data Exchange (ETDEWEB)

    Nicholas, N.J.; Eccleston, G.W.; Fearey, B.L. [and others

    1997-10-01

    Under US initiatives, over two hundred metric tons of fissile materials have been declared to be excess to national defense needs. These excess materials are in both classified and unclassified forms. The US has expressed the intent to place these materials under international inspections as soon as practicable. To support these commitments, members of the US technical community are examining a variety of nonintrusive approaches (i.e., those that would not reveal classified or sensitive information) for verification of a range of potential declarations for these classified and unclassified materials. The most troublesome and potentially difficult issues involve approaches for international inspection of classified materials. The primary focus of the work to date has been on the measurement of signatures of relevant materials attributes (e.g., element, identification number, isotopic ratios, etc.), especially those related to classified materials and items. The authors are examining potential attributes and related measurement technologies in the context of possible verification approaches. The paper will discuss the current status of these activities, including their development, assessment, and benchmarking status.

  3. Unilateral failure of development of mandibular premolars and molars in an Eastern Grey kangaroo (Macropus giganteus) and its effects on molar progression.

    Science.gov (United States)

    Barber, D; Campbell, J; Davey, J; Luke, T; Agren, E; Beveridge, I

    2008-01-01

    An adult male Eastern Grey kangaroo from a wildlife reserve near Melbourne was submitted for necropsy examination and was discovered to have abnormal dentition. There was no evidence that any premolars or molars had ever been present on the right mandible, whilst the incisors were normal. The age of the kangaroo was estimated to be 1 year 9 months using the right maxillary molars and 2 years 4 months old using the contralateral side, presumably due to the asymmetry of the dental arcades. 'Lumpy jaw', a common periodontal disease of kangaroos, from which Bacteroides sp was cultured, was present on the base of the vertical ramus of the left mandible. Complete unilateral absence of premolar and molar teeth in the mandible of a kangaroo has not been described. This condition affected molar progression in both sets of maxillary molars.

  4. El Trípode en la distalización unilateral de molares superiores: Cambios oclusales The tripod in the unilateral distalization of superior molars: Occlusal changes

    Directory of Open Access Journals (Sweden)

    Ania Moreno Véliz

    2008-06-01

    Full Text Available OBJETIVO: aumentar los conocimientos en los tratamientos distalizadores, se realizó este estudio con una técnica distalizadora novedosa: el Trípode. MÉTODOS: el estudio incluyó 6 pacientes con clase II de Angle por mesogresión de los molares superiores y con ausencia clínica del segundo molar superior. Se evaluaron las modificaciones a nivel dental producidas por el trípode. RESULTADOS: los primeros molares superiores se distalizaron (3.36 mm, además, el molar sufrió una inclinación distal; las segundas bicúspides siguieron al molar en su movimiento distal, mientras que, la primera bicúspide del lado de la distalización se mesializó; los incisivos resultaron vestibularizados y la anchura transversal, medida a nivel de los primeros molares y primeras bicúspides, disminuyó, mientras que, en las segundas bicúspides aumentó. CONCLUSIONES: los cambios producidos con esta aparatología a nivel dental han sido: distalización de los primeros molares superiores (3.36 mm, además, el molar sufrió una inclinación distal; las segundas bicúspides siguieron al primer molar en su movimiento distal, mientras que, la primera bicúspide del lado de la distalización se mesializó; los incisivos resultaron vestibularizados; la anchura transversal medida a nivel de los primeros molares y primeras bicúspides disminuyó, mientras que, en las segundas bicúspides aumentóOBJECTIVE: to enhance the knowledge of the distalizing treatments, a study was conducted with a distalizing novel technique: the tripod. METHODS: the study included 6 patients with Angle class II due to mesogression of the superior molars and with clinical absence of the second superior molar. The modifications produced by the tripod at the dental level were evaluated. RESULTS: The first superior molars were distalized (3.36 mm. The molar also suffered a distal inclination, the second bicuspids followed the molar in its distal movement, whereas the first bicuspid of the side of

  5. Anesthetic management in thyroid crisis triggered by molar pregnancy

    Directory of Open Access Journals (Sweden)

    Harun Aydoğan

    2012-09-01

    Full Text Available Clinical thyrotoxicosis is one of the rare complications of molar pregnancy. The cause of the symptoms associated with hyperthyroidism in mol hydatiform is the thyrotrophic effects of high levels of β-hCG. The hCG molecule consists of α and β subunits; the α subunit is identical to TSH and the β subunit has a similar structure to TSH. In this case report it was aimed to discuss the anesthetic management of a dilatation and curettage case in a patient with mol hydatiform and thyroid crisis. J Clin Exp Invest 2012; 3 (3: 433-434Key words: Hydatidiform mole, hyperthyroidism, anesthesia

  6. Relationship between root development of third molars and chronological age

    OpenAIRE

    Suárez Canlla, Carlos Alberto; Facultad de Odontología Universidad Nacional “San Luis Gonzága” Ica

    2014-01-01

    La estimación de la edad en individuos de 14 a 25 años es de utilidad para la identificación humana en la práctica clínica y tanatológica forense, así también, como indicador del crecimiento y desarrollo. Cuando todos los dientes permanentes han completado su formación, el desarrollo radicular de la tercera molar es el único indicador que puede ser utilizado para lograr predecir la edad de los individuos hasta los 25 años. El presente estudio piloto tiene como objetivo establecer la relación ...

  7. Irregular Periapical Radiopacity in Mandibular Premolars and Molars

    Directory of Open Access Journals (Sweden)

    S. Aravind Warrier

    2014-01-01

    Full Text Available Increased deposition of cementum is observed in a wide number of both benign and malignant conditions. Many cases are often diagnosed during routine examination as an incidental finding. Diagnosing correctly without confusing it with other similarly appearing lesions, thus avoiding subjecting the patient to unnecessary investigations and stress, is of prime importance. We report one such case, where the patient presented with the routine complaint of a painful tooth, during the investigation of which he was also diagnosed with hypercementosis affecting the mandibular second premolars and molars bilaterally. The literature review reveals that not many cases of hypercementosis are frequently reported.

  8. Mini-implants: mechanical resource for molars uprighting

    Directory of Open Access Journals (Sweden)

    Susiane Allgayer

    2013-02-01

    Full Text Available INTRODUCTION: The early orthodontic treatment allows correction of skeletal discrepancies by growth control, and the elimination of deleterious habits, which are risk factors for the development of malocclusions, favoring for the correction of tooth positioning later in a second treatment stage. During development of teeth and occlusion, the mandibular second molars commonly erupt in the oral cavity after all other teeth of the anterior region. In their eruptive process there may be a condition known as tooth impaction, which precludes its complete eruption and requires proper uprighting treatment. The temporary anchorage devices allow disimpaction and movement of these teeth directly to their final position, without the need of patient compliance or reaction movements in other parts of the arch. OBJECTIVE: This paper aims at describing a case report of the treatment of a patient with Angle Class II malocclusion, performed in two phases, in which mini-implants were used for uprighting the impacted mandibular second molars.INTRODUÇÃO: o tratamento ortodôntico precoce permite a correção das discrepâncias esqueléticas por meio do controle de crescimento e a eliminação de hábitos deletérios, que são fatores de risco para o desenvolvimento de más oclusões, que favorecem a correção do posicionamento dentário mais tardiamente, em uma segunda fase do tratamento. Durante o desenvolvimento da dentição e da oclusão, normalmente o segundo molar inferior chega à cavidade bucal após todos os dentes posicionados anteriormente a ele. Durante seu processo eruptivo, pode ocorrer uma condição chamada "impacção dentária", em que sua erupção completa é interrompida, exigindo tratamento apropriado para verticalização. Os dispositivos temporários de ancoragem permitem a desimpacção e a movimentação desses dentes diretamente às suas posições finais, sem a necessidade de cooperação do paciente e sem movimento de reação nas

  9. Pericoronitis, deep fascial space infections, and the impacted third molar.

    Science.gov (United States)

    Litonjua, L S

    1996-01-01

    Patients consulting the Philippine General Hospital Dentistry Department for management of impacted mandibular third molars were studied for the presence of pericoronits and deep fascial space infections. 18% of total cases presented an infection, while 13% presented with pericoronitis. 11% presented with deep fascial infection of which 72% were secondary to pericoronitis. A radiographic evaluation showed the vertical angulation (68%) with the highest portion at or above the occlusal level (70%) associated the most with pericoronits. The potential of pericoronitis developing to a deep space infection should always be considered.

  10. Development of caries in permanent first molars adjacent to primary second molars with interproximal caries: four-year prospective radiographic study.

    Science.gov (United States)

    Vanderas, Apostole P; Kavvadia, Katerina; Papagiannoulis, Lisa

    2004-01-01

    This study investigated the effect of the primary second molars' distal surface caries on the incidence of the permanent first molars' mesial surface caries in 613 paired tooth surfaces of children ages 6 to 8 years at baseline examination. Proximal caries and its progression were diagnosed by bite-wing radiographs taken at a 1-year interval over a period of 4 years. The permanent first molars' mesial surfaces and primary second molars' distal surfaces were examined. Recorded were: (1) sound surfaces; (2) carious lesions on the enamel's external and internal half and on the dentin's external, middle, and internal third; (3) filled, extracted, and exfoliated teeth. The logistic model for panel data was employed to estimate the effect of proximal caries of the primary second molars' distal surfaces on the incidence of the permanent first molars' mesial surface caries. The 95% confidence interval probability was used. Sensitivity and specificity as well as the positive and negative predictive rates were computed. The results showed that the presence of proximal caries on each primary second molars' distal surfaces significantly affected the development of proximal caries on the corresponding permanent first molar's mesial surfaces. Age was estimated to exert a positive and highly significant impact, while gender had no effect. The odds ratio values ranged from 4.86 to 63.43. The values of sensitivity and specificity ranged from 45% to 97% and 80% to 89%, respectively, while the positive and negative rates ranged from 40% to 56% and 90% to 99%, respectively. Proximal caries present on the primary second molars' distal surfaces increases the risk of developing caries on the permanent first molars' mesial surfaces. This risk, however, is different among the paired surfaces studied.

  11. Size of the lower third molar space in relation to age in Serbian population

    Directory of Open Access Journals (Sweden)

    Zelić Ksenija

    2013-01-01

    Full Text Available Background/Aim. It is considered that the shortage of space is the major cause of the third molar impaction. The aim of this study was to establish the frequency of insufficient lower third molar eruption space in Serbian population, to question the differences in this frequency in the subjects of different age, to determine the influence of the lower third molar space (retromolar space size on third molar eruption, and to investigate a possible correlation between the size of gonial angle and the space/third molar width ratio. Methods. Digital orthopantomograms were taken from 93 patients divided into two groups: early adult (16-18 years of age and adult (18-26 patients. Retromolar space, mesiodistal third molar crown width, gonial angle and eruption levels were measured. Results. The space/third molar width in early adult subjects was smaller (p < 0.0001 and insufficient space was significantly more frequent (p = 0.0003 than in adult patients. Considerably more third molars erupted in case of enough space in both age groups (p < 0.0001. There was no difference between the means of gonial angle size in relations to the available space. Conclusions. The retromolar space/third molar width ratio is more favorable in adult subjects. Gonial angle is not in correlation with the retromolar space/third molar width ratio. [Projekat Ministarstva nauke Republike Srbije, br. 45005

  12. Comparison of Primary Molar Crown Dimensions with Stainless Steel Crowns in a Sample of Iranian Children.

    Science.gov (United States)

    Afshar, Hossein; Kamali Sabeti, Arghavan; Shahrabi, Mahdi

    2015-01-01

    Background and aims. Due to anatomic variation in tooth anatomy between populations, this study compared the buccolingual (BL) and mesiodistal (MD) dimensions of primary molars with those of stainless steel crowns (SSCs) in anIranian population. Materials and methods. Impressions were taken from both dental arches of children, and casts were poured. Teeth with caries, restoration, hypoplasia or other dental anomalies were excluded. 216 primary molars were selected and divided into 4 groups of 54 each (maxillary and mandibular first and second primary molars). MD/BL dimensions were measured using a digital caliper with 0.01 mm precision on casts and SCCs (3M brand). Data were assessed using paired t-test, post hoc test and ANOVA. P < 0.05 was considered statistically significant. Results. The MD dimension of the lower first molar SSC and the BL dimension of the lower second molar SSC had the least difference with the corresponding values of the respective teeth. The MD dimension of the upper second molar SSC and the BL dimension of the upper first molar SSC had the greatest difference with the corresponding values in the respective teeth. Comparison of the two different brands of SSCs for the upper first molar revealed that both types had significant differences with the teeth in terms of both MD (P = 0.0) and BL (P = 0.0) dimensions. Conclusion. In the studied population, best adaptation was seen in second lower molars and the least adaptationswere seen in first and second upper molars.

  13. Radiographic evaluation of third molar development in 6 to 24 year olds

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yun Hwa; Cho, Bong Hae [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Yangsan (Korea, Republic of)

    2014-09-15

    This study investigated the developmental stages of third molars in relation to chronological age and compared third molar development according to location and gender. A retrospective analysis of panoramic radiographs of 2490 patients aged between 6 and 24 years was conducted, and the developmental stages of the third molars were evaluated using the modified Demirjian's classification. The mean age, standard deviation, minimal and maximal age, and percentile distributions were recorded for each stage of development. A Mann-Whitney U test was performed to test the developmental differences in the third molars between the maxillary and mandibular arches and between genders. A linear regression analysis was used for assessing the correlation between the third molar development and chronological age. The developmental stages of the third molars were more advanced in the maxillary arch than the mandibular arch. Males reached the developmental stages earlier than females. The average age of the initial mineralization of the third molars was 8.57 years, and the average age at apex closure was 21.96 years. The mean age of crown completion was 14.52 and 15.04 years for the maxillary and the mandibular third molars, respectively. The developmental stages of the third molars clearly showed a strong correlation with age. The third molars developed earlier in the upper arch than the lower arch; further, they developed earlier in males than in females.

  14. Radiographic evaluation of third molar development in 6- to 24-year-olds.

    Science.gov (United States)

    Jung, Yun-Hoa; Cho, Bong-Hae

    2014-09-01

    This study investigated the developmental stages of third molars in relation to chronological age and compared third molar development according to location and gender. A retrospective analysis of panoramic radiographs of 2490 patients aged between 6 and 24 years was conducted, and the developmental stages of the third molars were evaluated using the modified Demirjian's classification. The mean age, standard deviation, minimal and maximal age, and percentile distributions were recorded for each stage of development. A Mann-Whitney U test was performed to test the developmental differences in the third molars between the maxillary and mandibular arches and between genders. A linear regression analysis was used for assessing the correlation between the third molar development and chronological age. The developmental stages of the third molars were more advanced in the maxillary arch than the mandibular arch. Males reached the developmental stages earlier than females. The average age of the initial mineralization of the third molars was 8.57 years, and the average age at apex closure was 21.96 years. The mean age of crown completion was 14.52 and 15.04 years for the maxillary and the mandibular third molars, respectively. The developmental stages of the third molars clearly showed a strong correlation with age. The third molars developed earlier in the upper arch than the lower arch; further, they developed earlier in males than in females.

  15. Banding versus bonding of first permanent molars: a multi-centre randomized controlled trial.

    Science.gov (United States)

    Nazir, Mariyah; Walsh, Tanya; Mandall, Nicky A; Matthew, Susie; Fox, Dee

    2011-06-01

    To assess the effectiveness of banding versus bonding of first permanent molars during fixed appliance treatment; in terms of attachment failure, patient discomfort and post-treatment enamel demineralization. Multi-centre randomized clinical trial. One District General Hospital Orthodontic Department and two Specialist Orthodontic Practices. Orthodontic patients aged between 10 and 18 years old, randomly allocated to either receive molar bands (n=40) or molar bonds (n=40). Bands were cemented with a conventional glass ionomer cement and tubes were bonded with light-cured composite to all four first permanent molar teeth for each subject. Attachments were reviewed at each recall appointment to assess loosening or loss. The clinical end point of the trial was the day of appliance debond. Enamel demineralization at debond was assessed using the modified International Caries Assessment and Detection System (ICDAS). The first time failure rate for molar bonds was 18·4% and 2·6% for molar bands (P=0·0002). Survival analysis demonstrated molar bonds were more likely to fail compared with molar bands. First permanent molars with bonded tubes experienced more demineralization than those with cemented bands (P=0·027). There was no statistically significant difference in discomfort experienced by patients after banding or bonding first permanent molars (P>0·05). This study shows that as part of fixed appliance therapy, American Orthodontics photoetched first permanent molar bands cemented with 3M ESPE Ketac-Cem perform better than American Orthodontics low profile photo-etched and mesh-based first permanent molar tubes bonded with 3M Unitek Transbond XT in terms of failure behaviour and molar enamel demineralization.

  16. [Degradation evaluation and success of pulpectomy with a modified primary root canal filling in primary molars].

    Science.gov (United States)

    Chen, Xiao-xian; Lin, Bi-chen; Zhong, Jie; Ge, Li-hong

    2015-06-18

    To compare clinical and radiographic success rates of a modified primary root canal filling (ingredients: zinc oxide-eugenol, iodoform and calcium hydroxide, MPRCF) vs. zinc oxide-eugenol cement (ZOE) and calcium hydroxide/iodoform paste (Vitapex) in pulpectomized primary molars at the end of 6 and 12 months, and to evaluate the degradation of materials in the root canals and in apical area. In the study, 160 primary molars from 155 children (the average age: 5.88±1.27 years) that met the inclusion criteria were allocated to one of the three materials via block randomization. A two-visit pulpectomy was performed by an investigator. The clinical and radiographic diagnoses were blindly assessed by other two investigators. At the end of 6 and 12 months, the ZOE and MPRCF success rates were 100% both in clinical and radiographic evaluation. The Vitapex group showed the clinical success of 100% at the end of 6 months and 94.5% at the end of 12 months. Radiographic evaluation for the Vitapex group showed 80.4% success at the end of 6 months and 60.7% at the end of 12 months. No statistically significant differences were noted at the end of 6 months in the three groups both in clinical and radiographic evaluation. The success rates in clinical and radiographic evaluation at the end of 12 months for ZOE and MPRCF groups were not significantly different, and better than those for Vitapex group with statistically significant difference. The completely resorb rate of excess extruded extraradicularly were 14.3%, 100% and 71.4% for ZOE, Vitapex and MPRCF at the end of 12 months. The rates of resorption of material at the same rate of the root were 5.8%, 7.2% and 40.9% for ZOE, Vitapex and MPRCF at the end of 12 months. MPRCF, a mixture of zinc oxide eugenol and iodoform with calcium hydroxide can be used as a root canal filling material in primary teeth, taking account of the success rate and resorbing at a similar rate with the roots of the primary teeth.

  17. Excessive anticoagulation with warfarin or phenprocoumon may have multiple causes

    DEFF Research Database (Denmark)

    Meegaard, Peter Martin; Holck, Line H V; Pottegård, Anton

    2012-01-01

    Excessive anticoagulation with vitamin K antagonists is a serious condition with a substantial risk of an adverse outcome. We thus found it of interest to review a large case series to characterize the underlying causes of excessive anticoagulation....

  18. Supplemental root in a mandibular first molar: a rarity

    Directory of Open Access Journals (Sweden)

    Poonam Mahajan

    2011-04-01

    Full Text Available Anatomic variations are common in human dentition. A clear understanding of these variations is very important for success of endodontic treatment. A dentist should be aware of these anatomic variations as this can affect the treatment outcome. A case of endodontic therapy is presented in which inability to locate an anatomically rare supplemental canal of a three rooted mandibular first molar resulted in treatment failure. A 21-year-old female reported with pain and swelling in relation to lower right first molar. An intra oral periapical radiograph revealed 3 roots; the first canal of the mesial root and a canal of one of the distal roots were found to be treated endodontically, which were infraobturated but the canal of the 2nd distal root had not been treated. The radiograph revealed periapical radiolucency and widening of periodontal space. Prior to starting the endodontic treatment the clinician must be aware of the anatomic variations in tooth pulp morphology and also the importance of preoperative radiographs cannot be underscored.

  19. [The first permanent molars and palatal or mandibular variations].

    Science.gov (United States)

    Coulomb, E; Blocquel, H; Laude, M; Hurel, C

    1990-01-01

    101 children, each of them with two teleradiographies, were selected. The first X-ray was taken at the time of the mixed dentition, the second one, when the permanent dentition was established. The purpose of the research is to show the oscillations of the palatine and mandibular planes, and their link to the movements of the first permanent molars. The palatine plane is found to swing between -7 degrees and +5 degrees with an average of -0.97 degree. The posterior part of that plane rocks downwards in 51% of the children. The limits are -7 degrees and -1 degree, with an average of -3.2 degrees. In 22%, the plane rocks upwards between +1 degree and +5 degrees with an average of +3.1 degrees. In 27% it moves parallel to itself. The posterior part of the mandibular plane varies between -6 degrees and +5 degrees, with an average of -1.1 degrees. It rocks downwards in 48% of the cases, between -6 degrees and -1 degree with an average of -3.9 degrees. In 22% of the children, this plane rocks upwards between +1 degree and +5 degrees with an average of +2.5 degrees. In 30%, it moves parallel to itself. The overall result is that the more the posterior part of the palate, or of the mandible moves downwards, the more the first permanent molars get straight or move forwards.

  20. Mandibular lip bumper treatment and second molar eruption disturbances.

    Science.gov (United States)

    Ferro, Fabrizia; Funiciello, Gloria; Perillo, Letizia; Chiodini, Paolo

    2011-05-01

    Mandibular lip-bumper (LB) nonextraction treatment, usually started before complete second molar (M2) eruption, inevitably interacts with the development of the dentition. Yet, its effects on M2 eruption are still unknown. The first aim of this study was to retrospectively investigate whether LB therapy (260 patients) enhances the risk for M2 ectopic eruptions and impactions in comparison with 135 untreated subjects. The second aim was to assess, among treated patients (n = 197), the main potential determinants of M2 impaction and ectopic eruption. M2 eruption and impaction were determined on panoramic radiographs. To assess the predictive role of M2 inclination in relation to the first molar, a panoramic radiograph suitable for this measurement before treatment was required. The data were analyzed by using software (version 8.2, SAS, Cary, NC). LB treatment significantly enhanced M2 impaction and ectopic eruption. Negative prognostic factors were found. An initial inclination of the M2 greater than 30° was significantly associated with a higher impaction risk compared with an angulation less than 10°. LB treatment duration longer than 2 years increased the risk of ectopic eruptions. While gaining space in the anterior arch, unwanted effects might be produced in the posterior arch. To be informed about these unplanned events is necessary to better optimize treatment. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  1. Size and shape variability in human molars during odontogenesis.

    Science.gov (United States)

    Morita, W; Yano, W; Nagaoka, T; Abe, M; Nakatsukasa, M

    2014-03-01

    Under the patterning cascade model (PCM) of cusp development inspired by developmental genetic studies, it is predicted that the location and the size of later-forming cusps are more variable than those of earlier-forming ones. Here we assessed whether differences in the variability among cusps in total and each particular crown component (enamel-dentin junction [EDJ], outer enamel surface [OES], and cement-enamel junction [CEJ]) could be explained by the PCM, using human maxillary permanent first molars (UM1) and second deciduous molars (um2). Specimens were µCT-scanned, and 3D models of EDJ and OES were reconstructed. Based on these models, landmark-based 3D geometric morphometric analyses were conducted. Size variability in both tooth types was generally consistent with the above prediction, and the differences in size variation among cusps were smaller for the crown components completed in later stages of odontogenesis. With a few exceptions, however, the prediction was unsupported regarding shape variability, and UM1 and um2 showed different patterns. Our findings suggested that the pattern of size variability would be caused by temporal factors such as the order of cusp initiation and the duration from the beginning of mineralization to the completion of crown formation, whereas shape variability may be affected by both topographic and temporal factors.

  2. Altered distribution of Ghrelin protein in mice molar development.

    Science.gov (United States)

    Liu, Bo; Han, Xiuchun; Feng, Wei; Cui, Jian; Hasegawa, Tomoka; Amizuka, Norio; Xu, Xin; Li, Minqi

    2016-05-01

    Ghrelin, an appetite-stimulating hormone, plays diverse regulatory functions in cell growth, proliferation, differentiation and apoptosis during mammalian development. There is limited information currently available regarding Ghrelin expression during mammalian tooth development, thus we aimed to establish the spatiotemporal expression of Ghrelin during murine molar odontogenesis. Immunohistochemistry was performed to detect the expression pattern of Ghrelin in mandible molar from E15.5 to PN7 during murine tooth development. The results showed that Ghrelin initially expressed in the inner enamel epithelium and the adjacent mesenchymal cells below, further with persistent expression in the ameloblasts and odontoblasts throughout the following developmental stages. In addition, Ghrelin was also present in Hertwig's epithelial root sheath at the beginning of tooth root formation. These results suggest that Ghrelin was present in tooth organs throughout the stages of tooth development, especially in ameloblasts and odontoblasts with little spatiotemporal expression differences. However, the potential regulatory roles of this hormone in tooth development still need to be validated by functional studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Nanoparticle counting: towards accurate determination of the molar concentration.

    Science.gov (United States)

    Shang, Jing; Gao, Xiaohu

    2014-11-07

    Innovations in nanotechnology have brought tremendous opportunities for the advancement of many research frontiers, ranging from electronics, photonics, energy, to medicine. To maximize the benefits of nano-scaled materials in different devices and systems, precise control of their concentration is a prerequisite. While concentrations of nanoparticles have been provided in other forms (e.g., mass), accurate determination of molar concentration, arguably the most useful one for chemical reactions and applications, has been a major challenge (especially for nanoparticles smaller than 30 nm). Towards this significant yet chronic problem, a variety of strategies are currently under development. Most of these strategies are applicable to a specialized group of nanoparticles due to their restrictions on the composition and size range of nanoparticles. As research and uses of nanomaterials are being explored in an unprecedented speed, it is necessary to develop universal strategies that are easy to use and are compatible with nanoparticles of different sizes, compositions, and shapes. This review outlines the theories and applications of current strategies to measure nanoparticle molar concentration, discusses the advantages and limitations of these methods, and provides insights into future directions.

  4. Reliability in estimating taurodontism of permanent molars from orthopantomograms.

    Science.gov (United States)

    Tulensalo, T; Ranta, R; Kataja, M

    1989-10-01

    Taurodontism is a morphologic dental trait showing continuous expressivity, and criteria of the degree of pulp chamber elongation vary in different investigations. The aim of this investigation was to test a simple method of assessing taurodontism in the developing dentition from orthopantomograms in order to determine its reliability for later use in epidemiologic investigations. The method was also compared with other methods. Forty-three children 10-16.9 yr of age with one or more taurodontic permanent first or second molars were selected for the study. A subgroup of 16 children with two longitudinally obtained radiographs was used in a follow-up study of the same tooth in two different formational stages. The follow-up time averaged 2.2 yr. The distance between the baseline connecting the mesial and distal points of the cementoenamel junction and the highest point of the floor of the pulp chamber was measured (Measure 3). A tooth was classified as taurodontic when Measure 3 reached or exceeded 3.5 mm. This distance remained unchanged during the course of tooth development. Intraexaminer reliability of two examiners in reproducing the same classification was, on average, 96.2%, and the interexaminer reliability was 93.2%. The reliability was greater for the first than for the second molars. Results obtained by this method agreed well with those obtained by other methods. Measure 3 proved to be reliable in assessing taurodontism in the developing dentition from orthopantomograms in epidemiologic investigations.

  5. Nanoparticle Counting: Towards Accurate Determination of the Molar Concentration

    Science.gov (United States)

    Shang, Jing; Gao, Xiaohu

    2014-01-01

    Summary Innovations in nanotechnology have brought tremendous opportunities for the advancement of many research frontiers, ranging from electronics, photonics, energy, to medicine. To maximize the benefits of nano-scaled materials in different devices and systems, precise control of their concentration is a prerequisite. While concentrations of nanoparticles have been provided in other forms (e.g., mass), accurate determination of molar concentration, arguably the most useful one for chemical reactions and applications, has been a major challenge (especially for nanoparticles smaller than 30 nm). Towards this significant yet chronic problem, a variety of strategies are currently under development. Most of these strategies are applicable to a specialized group of nanoparticles due to their restrictions on the composition and size ranges of nanoparticles. As research and uses of nanomaterials being explored in an unprecedented speed, it is necessary to develop universal strategies that are easy to use, and compatible with nanoparticles of different sizes, compositions, and shapes. This review outlines the theories and applications of current strategies to measure nanoparticle molar concentration, discusses the advantages and limitations of these methods, and provides insights into future directions. PMID:25099190

  6. Regulators of Collagen Fibrillogenesis during Molar Development in the Mouse

    Directory of Open Access Journals (Sweden)

    Ivana Zvackova

    2017-08-01

    Full Text Available Development of mammalian teeth and surrounding tissues includes time–space changes in the extracellular matrix composition and organization. This requires complex control mechanisms to regulate its synthesis and remodeling. Fibril-associated collagens with interrupted triple helices (FACITs and a group of small leucine-rich proteoglycans (SLRPs are involved in the regulation of collagen fibrillogenesis. Recently, collagen type XII and collagen type XIV, members of the FACITs family, were found in the peridental mesenchyme contributing to alveolar bone formation. This study was designed to follow temporospatial expression of collagen types XIIa and XIVa in mouse first molar and adjacent tissues from embryonic day 13, when the alveolar bone becomes morphologically apparent around the molar tooth bud, until postnatal day 22, as the posteruption stage. The patterns of decorin, biglycan, and fibromodulin, all members of the SLRPs family and interacting with collagens XIIa and XIVa, were investigated simultaneously. The situation in the tooth was related to what happens in the alveolar bone, and both were compared to the periodontal ligament. The investigation provided a complex localization of the five antigens in soft tissues, the dental pulp, and periodontal ligaments; in the mineralized tissues, predentin/dentin and alveolar bone; and junction between soft and hard tissues. The results illustrated developmentally regulated and tissue-specific changes in the balance of the two FACITs and three SLRPs.

  7. Modeling excessive nutrient loading in the environment.

    Science.gov (United States)

    Reckhow, K H; Chapra, S C

    1999-01-01

    Models addressing excessive nutrient loading in the environment originated over 50 years ago with the simple nutrient concentration thresholds proposed by Sawyer (1947. Fertilization of lakes by agricultural and urban drainage. New Engl. Water Works Assoc. 61, 109-127). Since then, models have improved due to progress in modeling techniques and technology as well as enhancements in scientific knowledge. Several of these advances are examined here. Among the recent approaches in modeling techniques we review are error propagation, model confirmation, generalized sensitivity analysis, and Bayesian analysis. In the scientific arena and process characterization, we focus on advances in surface water modeling, discussing enhanced modeling of organic carbon, improved hydrodynamics, and refined characterization of sediment diagenesis. We conclude with some observations on future needs and anticipated developments.

  8. Managing a patient with excessive belching.

    Science.gov (United States)

    Disney, Benjamin; Trudgill, Nigel

    2014-04-01

    A 50-year-old man with end-stage renal failure was referred by his general practitioner with dyspeptic symptoms. On further questioning the patient complained of a 10-year history of frequent belching. This was noticeably worse after meals and during times of stress. He did not have nocturnal belching and episodes of belching were less frequent when the patient was talking or distracted. There was no history of gastro-oesophageal reflux, vomiting, dysphagia, loss of appetite or weight loss. He was diagnosed with excessive, probably supragastric, belching. Further investigation was not deemed necessary. His symptoms have since settled with simple reassurance and explanation of their origin provided during the clinic visit.

  9. Production of ethanol from excess ethylene

    DEFF Research Database (Denmark)

    Kadhim, Adam S.; Carlsen, Kim B.; Bisgaard, Thomas

    2012-01-01

    Ethyl alcohol is one of the most important and used chemicals. Two common routes exist for the production: synthetic route typically based on petroleum feedstock and a fermentation route. The fermentation route comprises the majority of the produced ethyl alcohol. In this work, however, we...... alcohol (azeotropic mixture) is produced from excess ethylene containing propylene and methane as impurities. The design work is based on a systematic approach consisting of 12 tasks performed in a specified hierarchy. According to this 12-tasks design procedure, information about the product and process...... is obtained in tasks 1-2. A preliminary process flowsheet is obtained in task 3 using a modified Douglas hierarchical process synthesis method. The next tasks involves making design decisions and then further refining them in tasks 4-7 related to separation factors, reactor operating conditions, product...

  10. Excessive Fragmentary Myoclonus: What Do We Know?

    Directory of Open Access Journals (Sweden)

    Jiří Nepožitek

    2017-03-01

    Full Text Available Excessive fragmentary myoclonus (EFM is a polysomnographic finding registered by the surface electromyography (EMG and characterized as a result of the muscle activity consisting of sudden, isolated, arrhythmic, asynchronous and asymmetric brief twitches. The EMG potentials are defined by the exact criteria in The International Classification of the Sleep Disorders, 3rd edition and they appear with high intensity in all sleep stages. Clinical significance of EFM is unclear. It was observed in combination with other diseases and features such as obstructive and central sleep apnea, narcolepsy, periodic limb movements, insomnia, neurodegenerative disorders and peripheral nerve dysfunction. Relation to such wide range of diseases supports the opinion that EFM is nor a specific sleep disorder nor a specific polysomnographic sign. The option that EFM is a normal variant has also not been ruled out so far.

  11. Desaturation of excess intramyocellular triacylglycerol in obesity

    DEFF Research Database (Denmark)

    Haugaard, S B; Madsbad, S; Mu, Huiling

    2010-01-01

    OBJECTIVE: Excess intramyocellular triacylglycerol (IMTG), found especially in obese women, is slowly metabolized and, therefore, prone to longer exposure to intracellular desaturases. Accordingly, it was hypothesized that IMTG content correlates inversely with IMTG fatty acid (FA) saturation...... in sedentary subjects. In addition, it was validated if IMTG palmitic acid is associated with insulin resistance as suggested earlier. DESIGN: Cross-sectional human study. SUBJECTS: In skeletal muscle biopsies, which were obtained from sedentary subjects (34 women, age 48+/-2 years (27 obese including 7 type 2...... diabetes (T2DM), body mass index (BMI)=35.5+/-0.8 kg m(-2)) and 25 men, age 49+/-2 years (20 obese including 6 T2DM, BMI=35.8+/-0.8 kg m(-2))), IMTG FA composition was determined by gas-liquid chromatography after separation from phospholipids by thin-layer chromatography. RESULTS: Independently of gender...

  12. Excess plutonium disposition using ALWR technology

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, A. (ed.); Buckner, M.R.; Radder, J.A.; Angelos, J.G.; Inhaber, H.

    1993-02-01

    The Office of Nuclear Energy of the Department of Energy chartered the Plutonium Disposition Task Force in August 1992. The Task Force was created to assess the range of practicable means of disposition of excess weapons-grade plutonium. Within the Task Force, working groups were formed to consider: (1) storage, (2) disposal,and(3) fission options for this disposition,and a separate group to evaluate nonproliferation concerns of each of the alternatives. As a member of the Fission Working Group, the Savannah River Technology Center acted as a sponsor for light water reactor (LWR) technology. The information contained in this report details the submittal that was made to the Fission Working Group of the technical assessment of LWR technology for plutonium disposition. The following aspects were considered: (1) proliferation issues, (2) technical feasibility, (3) technical availability, (4) economics, (5) regulatory issues, and (6) political acceptance.

  13. Invisible excess of sense in social interaction.

    Science.gov (United States)

    Koubová, Alice

    2014-01-01

    The question of visibility and invisibility in social understanding is examined here. First, the phenomenological account of expressive phenomena and key ideas of the participatory sense-making theory are presented with regard to the issue of visibility. These accounts plead for the principal visibility of agents in interaction. Although participatory sense-making does not completely rule out the existence of opacity and invisible aspects of agents in interaction, it assumes the capacity of agents to integrate disruptions, opacity and misunderstandings in mutual modulation. Invisibility is classified as the dialectical counterpart of visibility, i.e., as a lack of sense whereby the dynamics of perpetual asking, of coping with each other and of improvements in interpretation are brought into play. By means of empirical exemplification this article aims at demonstrating aspects of invisibility in social interaction which complement the enactive interpretation. Without falling back into Cartesianism, it shows through dramaturgical analysis of a practice called "(Inter)acting with the inner partner" that social interaction includes elements of opacity and invisibility whose role is performative. This means that opacity is neither an obstacle to be overcome with more precise understanding nor a lack of meaning, but rather an excess of sense, a "hiddenness" of something real that has an "active power" (Merleau-Ponty). In this way it contributes to on-going social understanding as a hidden potentiality that naturally enriches, amplifies and in part constitutes human participation in social interactions. It is also shown here that this invisible excess of sense already functions on the level of self-relationship due to the essential self-opacity and self-alterity of each agent of social interaction. The analysis consequently raises two issues: the question of the enactive ethical stance toward the alterity of the other and the question of the autonomy of the self

  14. Invisible excess of sense in social interaction.

    Directory of Open Access Journals (Sweden)

    Alice eKoubová

    2014-09-01

    Full Text Available The question of visibility and invisibility in social understanding is examined here. First, the phenomenological account of expressive phenomena and key ideas of the participatory sense-making theory are presented with regard to the issue of visibility. These accounts plead for the principal visibility of agents in interaction. Although participatory sense-making does not completely rule out the existence of opacity and invisible aspects of agents in interaction, it assumes the capacity of agents to integrate disruptions, opacity and misunderstandings in mutual modulation. Invisibility is classified as the dialectical counterpart of visibility, i.e. as a lack of sense whereby the dynamics of perpetual asking, of coping with each other and of improvements in interpretation are brought into play. By means of empirical exemplification this article aims at demonstrating aspects of invisibility in social interaction which complement the enactive interpretation. Without falling back into Cartesianism, it shows through dramaturgical analysis of a practice called ‘(Interacting with the inner partner’ that social interaction includes elements of opacity and invisibility whose role is performative. This means that opacity is neither an obstacle to be overcome with more precise understanding nor a lack of meaning, but rather an excess of sense, a hiddenness of something real that has an active power (Merleau-Ponty. In this way it contributes to on-going social understanding as a hidden potentiality that naturally enriches, amplifies and in part constitutes human participation in social interactions. It is also shown here that this invisible excess of sense already functions on the level of self-relationship due to the essential self-opacity and self-alterity of each agent of social interaction. The analysis consequently raises two issues: the question of the enactive ethical stance towards the alterity of the other and the question of the autonomy of

  15. The lifetime of excess atmospheric carbon dioxide

    Science.gov (United States)

    Moore, Berrien; Braswell, B. H.

    1994-03-01

    We explore the effects of a changing terrestrial biosphere on the atmospheric residence time of CO2 using three simple ocean carbon cycle models and a model of global terrestrial carbon cycling. We find differences in model behavior associated with the assumption of an active terrestrial biosphere (forest regrowth) and significant differences if we assume a donor-dependent flux from the atmosphere to the terrestrial component (e.g., a hypothetical terrestrial fertilization flux). To avoid numerical difficulties associated with treating the atmospheric CO2 decay (relaxation) curve as being well approximated by a weighted sum of exponential functions, we define the single half-life as the time it takes for a model atmosphere to relax from its present-day value half way to its equilibrium pCO2 value. This scenario-based approach also avoids the use of unit pulse (Dirac Delta) functions which can prove troublesome or unrealistic in the context of a terrestrial fertilization assumption. We also discuss some of the numerical problems associated with a conventional lifetime calculation which is based on an exponential model. We connect our analysis of the residence time of CO2 and the concept of single half-life to the residence time calculations which are based on using weighted sums of exponentials. We note that the single half-life concept focuses upon the early decline of CO2 under a cutoff/decay scenario. If one assumes a terrestrial biosphere with a fertilization flux, then our best estimate is that the single half-life for excess CO2 lies within the range of 19 to 49 years, with a reasonable average being 31 years. If we assume only regrowth, then the average value for the single half-life for excess CO2 increases to 72 years, and if we remove the terrestrial component completely, then it increases further to 92 years.

  16. Third molar removal: an overview of indications, imaging, evaluation, and assessment of risk.

    Science.gov (United States)

    Marciani, Robert D

    2007-02-01

    Asymptomatic third molars may have associated periodontal pathology that may not be limited to the third molar region and have a negative impact on systemic health. Third molars should be considered for removal when there is clinical, radiographic, or laboratory evidence of acute or chronic periodontitis, caries, pericoronitis, deleterious effects on second molars, or pathology. Radiographic findings of extreme locations of impacted teeth, dense bone, dilacerated roots, large radiolucent lesions associated with impactions, and lower third molar apices in cortical inferior border bone are predictive of more complex surgery. Certain demographic and oral health conditions available to the surgeon before surgery and intraoperative circumstances are predictive of delayed recovery for health-related quality of outcomes and delayed clinical outcomes after third molar surgery.

  17. Correlation of acute pericoronitis and the position of the mandibular third molar.

    Science.gov (United States)

    Leone, S A; Edenfield, M J; Cohen, M E

    1986-09-01

    Acute pericoronitis is a painful, debilitating infection that is most commonly found among young adults with erupting mandibular third molars. Prophylactic removal of third molars to prevent this disease has been advocated, but this procedure requires an accurate description of the third molar at highest risk for this infection. Clinical and radiographic measurements were compared in 25 diseased subjects and 109 normal subjects. Of 10 variables significantly related to the presence of acute pericoronitis, stepwise discriminant analysis selected 4 variables that produced a canonical correlation coefficient of 0.71. In clinical terms, these variables described the tooth at highest risk for acute pericoronitis as a fully erupted, vertical mandibular third molar that is in contact with the adjacent second molar, at or above the occlusal plane, and partially encapsulated by soft or hard tissues. Prophylactic treatment of these third molars is highly recommended.

  18. 32 CFR 644.385 - Record of excess classification.

    Science.gov (United States)

    2010-07-01

    ... PROPERTY REAL ESTATE HANDBOOK Disposal Predisposal Action § 644.385 Record of excess classification. The DE will establish a record on ENG Form 836A, Real Property Disposal Report, of the excess classification... 32 National Defense 4 2010-07-01 2010-07-01 true Record of excess classification. 644.385 Section...

  19. 46 CFR 154.546 - Excess flow valve: Closing flow.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Excess flow valve: Closing flow. 154.546 Section 154.546... and Process Piping Systems § 154.546 Excess flow valve: Closing flow. (a) The rated closing flow of vapor or liquid cargo for an excess flow valve must be specially approved by the Commandant (CG-522). (b...

  20. Excessive Testing and Pupils in the Public Schools

    Science.gov (United States)

    Ediger, Marlow

    2017-01-01

    This article explores the question of excessive testing in public schools, its value in the educational process, and the impact that excessive testing may have on the student and the family unit. While assessments are valuable when used properly, excessive testing may lead to problems with unforeseen consequences.

  1. Stability of molar relationship after non-extraction Class II malocclusion treatment

    Directory of Open Access Journals (Sweden)

    Darwin Vaz de Lima

    2013-04-01

    Full Text Available OBJECTIVE: This study aimed to evaluate the stability of molar relationship after non-extraction treatment of Class II malocclusion. METHODS: The sample comprised 39 subjects (16 females, 23 males with initial Class II malocclusion treated with no extractions, using fixed appliances. Mean age at the beginning of treatment was 12.94 years, at the end of treatment was 15.14 years and at post-retention stage was 21.18 years. Mean treatment time was 2.19 years and mean time of post-treatment evaluation was 6.12 years. To verify the influence of the severity of initial Class II molar relationship in stability of molar relationship, the sample was divided into two groups, one presenting a ½-cusp or ¾-cusp Class II molar relationship, and the other with full-cusp Class II molar relationship. In dental casts from initial, final and postretention stages, molar, first and second premolars and canine relationships were measured. Data obtained were analyzed by dependent ANOVA, Tukey and Pearson's correlation tests, as well as independent t test between the two groups divided by severity of initial molar relationship. RESULTS: There was a non-statistically significant 0.12 mm relapse of molar relationship. The initial severity of Class II molar relationship was not correlated to relapse in the post-retention period. When compared, the two groups showed no difference in relapse of molar relationship. CONCLUSION: It was concluded that correction of Class II molar relationship is stable and initial severity does not influence relapse of molar relationship.

  2. Age estimation using development of third molars in South Indian population: A radiological study.

    Science.gov (United States)

    Priyadharshini, K Indra; Idiculla, Jose Joy; Sivapathasundaram, B; Mohanbabu, V; Augustine, Dominic; Patil, Shankargouda

    2015-05-01

    To assess the estimation of chronological age based on the stages of third molar development following the eight stages (A-H) method of Demirjian et al. in Chennai population of South India. A sample consisting of 848 individuals (471 males and 377 females) aged between 14 and 30 years was randomly selected for the clinical evaluation and 323 orthopantomograms with clinically missing third molars were taken for radiological evaluation using Demirjian's method from a Chennai population of known chronological age and sex. Statistical analysis was performed using Pearson's Chi-square test and mean values were compared between the study groups using t-test or analysis of variance (ANOVA) followed by Tukey's highly significant difference (HSD). In the present study, P < 0.05 was considered as the level of significance. The results showed that the mean age of having clinically completely erupted maxillary third molars was 22.41 years in male subjects and 23.81 years in female subjects and that of mandibular third molars was 21.49 years in male subjects and 23.34 years in female subjects. Mandibular third molars were clinically missing more often in females than in males. Eruption of mandibular third molars was generally ahead of the emergence of maxillary third molars into the oral cavity. Third molar development between male and female subjects showed statistically significant differences at calcification stage F and stage G in maxillary third molars and stage F in mandibular third molars (P < 0.05). There are differences indicating that maxillary and mandibular third molar eruption reached Demirjian's formation stages earlier in males than in females. It is suggested that in future studies, to increase the accuracy of age determination, indications of sexual maturity and ossification should also be evaluated in addition to third molar mineralization.

  3. [Role of lower third molars in the development of dental malocclusion: review of the literature].

    Science.gov (United States)

    Garattini, G; Grecchi, M T; Vogel, G

    1990-01-01

    The Author's aims was to review the role of the lower third molars in delayed crowding of the jaw. A global agreement exists on the fact that lower molars should be considered only one between several factors able to cause malocclusion. Finally, the germectomy of the third molars has to be performed only in carefully selected patients after a comprehensive diagnostic evaluation of the single case.

  4. Compensation trends of the angulation of first molars: retrospective study of 1 403 malocclusion cases

    OpenAIRE

    Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

    2014-01-01

    We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1 403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification an...

  5. Success Rate of Zinc Oxide Eugenol in Pulpectomy of Necrotic Primary Molars: A Retrospective Study

    OpenAIRE

    Zahra Bahrololoomi; Shiva Zamaninejad

    2015-01-01

    Introduction: Pulpectomy is a conservative treatment plan for primary necrotic teeth and Zinc Oxide Eugenol is still a good choice as root canal filling material but long term studies on poor prognosis molars are limited and almost contradictory. The purpose of this study is to evaluate the clinical and radiographical success rate of pulpectomy of necrotic primary molars using ZOE as the root canal filling material. Methods: 152 records of 76 primary molars on which two-visit pulpectomy had b...

  6. Fate of third molar in line of mandibular angle fracture - Retrospective study

    Directory of Open Access Journals (Sweden)

    Preetha Balaji

    2015-01-01

    Conclusion: The present study fails to identify any concrete factors that would predict the failure of the retained third molar that were involved in the line of mandibular fractures. The proof presented here, especially with low complication rates indicate that all impacted third molar along the line of fracture be removed and unless necessary, the partially erupted teeth would also be extracted. In such a situation, the rate of infection and survival of the third molar would have been entirely different.

  7. Orthodontic Molar Brackets: The Effect of Three Different Base Designs on Shear Bond Strength

    OpenAIRE

    Hudson, Athol P.; Grobler, Sias R.; Harris, Angela M. P.

    2011-01-01

    The purpose of the study was to assess the relative base designs of three different maxillary molar stainless steel brackets with reference to the shear bond strength of three different adhesive resins. The molar brackets used were Victory series (3M Unitek), Upper Molar (GAC) and Optimesh XRT (Ormco). The adhesives used were Transbond XT (3M Unitek), Enlight (Ormco) and Sure Ortho Light Bond (Sure Orthodontics). The human enamel specimens (144) were randomly divided into nine groups and each...

  8. Independent and Confluent Middle Mesial Root Canals in Mandibular First Molars: A Report of Four Cases

    Directory of Open Access Journals (Sweden)

    Mohanavelu Deepalakshmi

    2012-01-01

    Full Text Available Mandibular molars demonstrate considerable variations with respect to number of roots and root canals. The possibility of additional root canals should be considered even in teeth with a low frequency of abnormal root canal anatomy. This paper discusses the endodontic management of the rare anatomical complexity middle mesial canals in mandibular first molar and also serves to remind the clinicians that such anatomical variations should be taken into account during the endodontic treatment of the mandibular molars.

  9. The effect of headgear on upper third molars: a retrospective longitudinal study.

    Science.gov (United States)

    Miclotte, Annelie; Grommen, Bieke; Lauwereins, Steven; Cadenas de Llano-Pérula, Maria; Alqerban, Ali; Verdonck, Anna; Fieuws, Steffen; Jacobs, Reinhilde; Willems, Guy

    2017-08-01

    To investigate the effects of orthodontic non-extraction treatment with or without headgear on the position of and the space available for upper third molars in growing children with class II malocclusions. The sample consisted of pre- and post-treatment panoramic radiographs and lateral cephalograms of 294 class II orthodontic patients; 160 were treated with headgear and 134 were treated without headgear. The space available for the upper third molar was measured on the lateral cephalogram as the distance from pterygoid vertical (PTV) to the distal surface of the upper first molar crown (PTV-M1). Angulation, vertical position and tooth development stage of the upper third molars were evaluated on panoramic radiographs. All measurements were evaluated statistically. In both groups PTV-M1 increased, but the increase in PTV-M1 was significantly higher for patients treated without headgear. A linear model for repeated measures revealed that this difference was still significant after correction for age, gender and molar occlusion. Further, there is no evidence that the change in angulation, vertical position and development stage of the upper third molars during orthodontic treatment is influenced by headgear therapy. This study indicates that the use of headgear in growing patients significantly affects the space available for upper third molars. However, orthodontic treatment with headgear does not influence the angulation, vertical position and development stage of upper third molars. It is therefore important to always take into account third molars during treatment planning.

  10. Horizontal and vertical changes in anchor molars after extractions in bimaxillary protrusion cases

    Directory of Open Access Journals (Sweden)

    Pratik Chandra

    2016-01-01

    Full Text Available Objective: To evaluate changes in the anchor molar position (horizontal, vertical after retraction in bimaxillary protrusion maximum anchorage cases. Materials and Methods: Thirty patients requiring maximum anchorage after extraction of the first premolars were selected for this study. The second molars were banded in both arches along with trans-palatal arch in the maxillary arch and lingual arch in the mandibular arch. En mass retraction was done using sliding mechanics. Horizontal and vertical positions of the anchor first molars were evaluated cephalometrically before and after orthodontic retraction. Results: In the horizontal plane, maxillary first molars showed net mesial movement of 1.72 mm, and there was a statistical difference between the pre- and post-values (P < 0.001. The mandibular molars showed a net horizontal movement of 2.26 mm, and there was a statistically significant difference between the pre- and post-values (P < 0.001. In the vertical plane, there was vertical movement of the maxillary anchor molars by a net value of 0.95 mm which was statistically significant (P < 0.001. The mandibular anchor molars moved vertically by a net value of 0.45 mm. This difference was statistically not significant. Conclusion: There was anchorage loss seen in both the planes (horizontal, vertical of the maxillary anchor molars. In the mandibular anchor molars, there was anchorage loss seen only in the horizontal plane. No anchorage loss was seen in the vertical plane.

  11. Orthodontic uprighting of impacted mandibular permanent second molar: A case report

    Directory of Open Access Journals (Sweden)

    Reddy S

    2008-03-01

    Full Text Available The mandibular second molars can become impacted beneath the crown of the first molars due to various causes and fail to erupt normally. Presented herewith is a case report of orthodontic uprighting of a mesioangular impacted mandibular right permanent second molar. Though various treatment options were available, an uprighting push spring appliance was used as it is easy to fabricate and produces distal tipping and uprighting of the impacted tooth without the necessity of surgical assistance, bone removal, or splinting. The uprighting of the mandibular second molar was achieved within two months.

  12. Mandibular Third Molar Impaction: Review of Literature and a Proposal of a Classification

    Directory of Open Access Journals (Sweden)

    Gintaras Juodzbalys

    2013-06-01

    Full Text Available Objectives: The purpose of present article was to review impacted mandibular third molar aetiology, clinical anatomy, radiologic examination, surgical treatment and possible complications, as well as to create new mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results.Material and Methods: Literature was selected through a search of PubMed, Embase and Cochrane electronic databases. The keywords used for search were mandibular third molar, impacted mandibular third molar, inferior alveolar nerve injury third molar, lingual nerve injury third molar. The search was restricted to English language articles, published from 1976 to April 2013. Additionally, a manual search in the major anatomy and oral surgery journals and books was performed. The publications there selected by including clinical and human anatomy studies.Results: In total 73 literature sources were obtained and reviewed. Impacted mandibular third molar aetiology, clinical anatomy, radiographic examination, surgical extraction of and possible complications, classifications and risk factors were discussed. New mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results was proposed. Conclusions: The classification proposed here based on anatomical and radiological impacted mandibular third molar features is promising to be a helpful tool for impacted tooth assessment as well as for planning for surgical operation. Further clinical studies should be conducted for new classification validation and reliability evaluation.

  13. Effect of solution molarity on properties of hydrothermally grown ZnO nanostructures

    Science.gov (United States)

    Chen, Yi; Chen, Wei-You; Hsu, Hung-Pin; Lee, Jiunn-Chyi; Wu, Ya-Fen

    2017-07-01

    In this work, the hydrothermally grown ZnO nanostructures were successfully prepared on indium tin oxide glass using different aqueous solution molarities. The effect of solution molarity on the structual and optical properties of ZnO nanostructures were studied by X-ray diffraction and temperature-dependent photoluminescence (PL) measurements. The PL intensity ratio of the ultraviolet emission to the visible emission is also calculated. It is found that the crystal quality and the optical properties are improved by raising the solution molarity, but too higher solution molarity should lead to the disorder of ZnO structures, and deteriorate the crystal quality.

  14. Assessment of maxillary third molars with panoramic radiography and cone-beam computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yun Hoa; Cho, Bong Hae [Dept.of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Yangsan (Korea, Republic of)

    2015-12-15

    This study investigated maxillary third molars and their relation to the maxillary sinus using panoramic radiography and cone-beam computed tomography (CBCT). A total of 395 maxillary third molars in 234 patients were examined using panoramic radiographs and CBCT images. We examined the eruption level of the maxillary third molars, the available retromolar space, the angulation, the relationship to the second molars, the number of roots, and the relationship between the roots and the sinus. Females had a higher frequency of maxillary third molars with occlusal planes apical to the cervical line of the second molar (Level C) than males. All third molars with insufficient retromolar space were Level C. The most common angulation was vertical, followed by buccoangular. Almost all of the Level C molars were in contact with the roots of the second molar. Erupted teeth most commonly had three roots, and completely impacted teeth most commonly had one root. The superimposition of one third of the root and the sinus floor was most commonly associated with the sinus floor being located on the buccal side of the root. Eruption levels were differently distributed according to gender. A statistically significant association was found between the eruption level and the available retromolar space. When panoramic radiographs showed a superimposition of the roots and the sinus floor, expansion of the sinus to the buccal side of the root was generally observed in CBCT images.

  15. [Dissertations 25 years after date 47. Third molars in the lower jaw].

    Science.gov (United States)

    Maertens, J K M

    2016-12-01

    Mandibular third molar impaction causes many problems in the lower jaw. It has been assumed, for example, that impacted third molars are the cause of recurrent problems following orthodontic treatment. In order to prevent problems surgical removal of third molar buds, a germectomy, was proposed. An important factor was to predict the development of the third molar. In doctoral research, this was investigated. The causal relationship between the eruption of third molars and crowding of the lower front has never been proven. Therefore the preventive removal of asymptomatic impacted lower third molars is not advisable. It is, however, advisable to remove all asymptomatic partially erupted impacted third molars that are mesioangulated, distoangulated or horizontally impacted when the patient is between 18 and 25 years old. The absence of clear and clinically applicable predictions of problems relating to the eruption of third molars limits the indication of their germectomy. This doctoral research from 1990 produced a formula for predicting the eruption of third molars in the lower jaw.

  16. Mandibular third molar impaction: review of literature and a proposal of a classification.

    Science.gov (United States)

    Juodzbalys, Gintaras; Daugela, Povilas

    2013-07-01

    The purpose of present article was to review impacted mandibular third molar aetiology, clinical anatomy, radiologic examination, surgical treatment and possible complications, as well as to create new mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results. Literature was selected through a search of PubMed, Embase and Cochrane electronic databases. The keywords used for search were mandibular third molar, impacted mandibular third molar, inferior alveolar nerve injury third molar, lingual nerve injury third molar. The search was restricted to English language articles, published from 1976 to April 2013. Additionally, a manual search in the major anatomy and oral surgery journals and books was performed. The publications there selected by including clinical and human anatomy studies. In total 75 literature sources were obtained and reviewed. Impacted mandibular third molar aetiology, clinical anatomy, radiographic examination, surgical extraction of and possible complications, classifications and risk factors were discussed. New mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results was proposed. The classification proposed here based on anatomical and radiological impacted mandibular third molar features is promising to be a helpful tool for impacted tooth assessment as well as for planning for surgical operation. Further clinical studies should be conducted for new classification validation and reliability evaluation.

  17. A microCT Study of Three-Dimensional Patterns of Biomineralization in Pig Molars

    Directory of Open Access Journals (Sweden)

    Susanna S. Sova

    2018-02-01

    Full Text Available Domestic pig molars provide an interesting system to study the biomineralization process. The large size, thick enamel and complex crown morphology make pig molars relatively similar to human molars. However, compared to human molars, pig molars develop considerably faster. Here we use microCT to image the developing pig molars and to decipher spatial patterns of biomineralization. We used mineral grains to calibrate individual microCT-scans, which allowed an accurate measure of the electron density of the developing molars. The microCT results show that unerupted molars that are morphologically at the same stage of development, can be at markedly different stage of enamel biomineralization. Erupted molars show increased electron density, suggesting that mineralization continues in oral cavity. Yet, our comparisons show that human enamel has slightly higher electron density than pig enamel. These results support the relatively low hardness values and calcium level values that have been reported earlier in literature for pig teeth. The mineral calibration was an efficient method for the microCT-absorption models, allowing a relatively robust way to detect scanning artifacts. In conclusions, whereas thin sections remain the preferred way to analyze enamel features, such as incremental lines and crystal orientation, the microCT allows efficient and non-destructive comparisons between different teeth and species.

  18. Radiographic evaluations of molar intrusion and changes with or without retention in rats.

    Science.gov (United States)

    Choi, Yoon Jeong; Kim, Kyung-Ho; Lee, Kee-Joon; Chung, Chooryung J; Park, Young-Chel

    2011-05-01

    To describe radiographic changes caused by molar intrusion with or without retention methods in rats. Thirty 12-week-old male rats were assigned to six groups (n  =  5 each). Molar intrusion was achieved with an intrusion spring to two maxillary molars for 2 weeks. The control group underwent the same experimental conditions, but without the intrusion spring. The intrusion and control groups were then euthanized. In four groups, the intrusion spring was disengaged after intrusion and the new molar positions were either retained or not with an occlusal bite-block for 1 or 2 weeks. Radiographic changes were measured in the cusp tip, root apices, and alveolar crests. After 2 weeks of intrusion, the cusp tip and root apices had moved apically compared with the control group. However, the alveolar crests were similar in the intrusion and control groups. With retention bite-block, the new position of the intruded cusp tip was maintained, but the root apices had moved occlusally, and the alveolar crest between the two intruded molars had moved apically. Without retention, the cusp tip and root apices had moved occlusally, and the alveolar crest between the intruded molar and unintruded molars had moved occlusally compared with the intrusion group. Rat molars were successfully intruded and maintained at the altered position with retention bite-block. However, the apical root resorption was observed as an instant response. The alveolar crest adjacent to the intruded molars was repositioned apically, but that was a delayed response compared to root resorption.

  19. Sonolência excessiva Excessive daytime sleepiness

    Directory of Open Access Journals (Sweden)

    Lia Rita Azeredo Bittencourt

    2005-05-01

    Full Text Available A sonolência é uma função biológica, definida como uma probabilidade aumentada para dormir. Já a sonolência excessiva (SE, ou hipersonia, refere-se a uma propensão aumentada ao sono com uma compulsão subjetiva para dormir, tirar cochilos involuntários e ataques de sono, quando o sono é inapropriado. As principais causas de sonolência excessiva são a privação crônica de sono (sono insuficiente, a Síndrome da Apnéia e Hipopnéia Obstrutiva do Sono (SAHOS, a narcolepsia, a Síndrome das Pernas Inquietas/Movimentos Periódicos de Membros (SPI/MPM, Distúrbios do Ritmo Circadiano, uso de drogas e medicações e a hipersonia idiopática. As principais conseqüências são prejuízo no desempenho nos estudos, no trabalho, nas relações familiares e sociais, alterações neuropsicológicas e cognitivas e risco aumentado de acidentes. O tratamento da sonolência excessiva deve estar voltado para as causas específicas. Na privação voluntária do sono, aumentar o tempo de sono e higiene do sono, o uso do CPAP (Continuous Positive Airway Pressure na Síndrome da Apnéia e Hipopnéia Obstrutiva do Sono, exercícios e agentes dopaminérgicos na Síndrome das Pernas Inquietas/Movimentos Periódicos de Membros, fototerapia e melatonina nos Distúrbios do Ritmo Circadiano, retiradas de drogas que causam sonolência excessiva e uso de estimulantes da vigília.Sleepiness is a physiological function, and can be defined as increased propension to fall asleep. However, excessive sleepiness (ES or hypersomnia refer to an abnormal increase in the probability to fall asleep, to take involuntary naps, or to have sleep atacks, when sleep is not desired. The main causes of excessive sleepiness is chronic sleep deprivation, sleep apnea syndrome, narcolepsy, movement disorders during sleep, circadian sleep disorders, use of drugs and medications, or idiopathic hypersomnia. Social, familial, work, and cognitive impairment are among the consequences of

  20. In vitro comparative evaluation of cleaning efficacy and volumetric filling in primary molars: Cone beam computed tomography evaluation

    Directory of Open Access Journals (Sweden)

    Anshula Neeraj Deshpande

    2017-01-01

    Full Text Available Introduction: Pulpectomy of primary teeth is mostly carried out with hand files and broaches which is tricky and time consuming procedure. The development of new design features like varying tapers, non-cutting safety tips and varying length of cutting blades have resulted in new generation of rotary instruments. Aim: To compare and evaluate cleaning efficacy, canal preparation and volumetric filling using conventional files and rotary V Taper files through cone beam computed tomography. Materials and Method: Thirty extracted primary molars were selected. The teeth were randomly divided into three groups each containing 10 teeth i.e. 30 canals in each group. Group A was instrumented with K files; Group B rotary V Taper files and Group C was Hybrid group. Sodium hypochlorite (1% was used for irrigation. Root canal filling was done with Zinc Oxide Eugenol cement in all groups. The volumetric analysis i.e. Percentage of Volume (POV of the root canal filling in primary molars was done through CBCT Software. Result: In present study, p- value was found to be significant (<0.05. Almost 100% of canals of hybrid group were fully filled and 63.3% of canals of hand filing group were partially filled. The filling was found to be dense and no. of voids was least in hybrid group. Conclusion: Clinical time required in primary molar endodontics, especially with unpredictability and difficulty of canal morphology, is inevitable. The study confirms superior ability of rotary-file systems to shape severely curved canals with less time and significant decrease in procedural errors like partial filling, voids and inappropriate canal preparation.