Study on engineering technologies in the Mizunami Underground Research Laboratory (FY 2015). Development of design and construction planning and countermeasure technologies (Contract research)

International Nuclear Information System (INIS)

Toguri, Satohito; Kobayashi, Shinji; Tsuji, Masakuni; Yahagi, Ryoji; Yamada, Toshiko; Matsui, Hiroya; Mikake, Shinichiro; Aoyagi, Yoshiaki; Sato, Toshinori

2017-03-01

The study on engineering technology in the Mizunami Underground Research Laboratory (MIU) project roughly consists of (1)development of design and construction planning technologies, (2)development of construction technology, (3)development of countermeasure technology, (4)development of technology for security, and (5) development of technologies regarding restoration and mitigating of the excavation effect. So far, the verification of the initial design based on the data obtained during excavation was mainly conducted as a research in the Construction Phase, also the countermeasure technologies to control groundwater inflow were examined as a research in the Operation Phase. In FY2015, as a part of the important issues on the research program, “Development of countermeasure technologies for reducing groundwater inflow” in the Japan Atomic Energy Agency 3rd Midterm Plan, water-tight grouting method has been developed. Grouting methods utilized in the MIU were evaluated and the post-excavation grouting at the -500m Access/Research Gallery-South was planned based on these evaluation results. Also, technology development from the viewpoint of geological disposal was summarized, and information on the alternative method to the grouting method was collected and organized. (author)

Engineering research, development and technology

International Nuclear Information System (INIS)

1994-05-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report

Research on technology of evaluating thermal property data of nuclear power materials

International Nuclear Information System (INIS)

Imai, Hidetaka; Baba, Tetsuya; Matsumoto, Tsuyoshi; Kishimoto, Isao; Taketoshi, Naoyuki; Arai, Teruo

1997-01-01

For the materials of first wall and diverter of nuclear fusion reactor, in order to withstand steady and unsteady high heat flux load, excellent thermal characteristics are required. It is strongly demanded to measure such thermal property values as heat conductivity, heat diffusivity, specific heat capacity, emissivity and so using small test pieces up to higher than 2000degC. As the materials of nuclear reactors are subjected to neutron irradiation, in order to secure the long term reliability of the materials, it is very important to establish the techniques for forecasting the change of the thermal property values due to irradiation effect. Also the establishment of the techniques for estimating the thermal property values of new materials like low radioactivation material is important. In National Research Laboratory of Metrology, the research on the advancement of the measuring technology for high temperature thermal properties has resulted in the considerably successful development of such technologies. In this research, the rapid measurement of thermal property values up to superhigh temperature with highest accuracy, the making of thermal property data set of high level, the analysis and evaluation of the correlation of material characters and thermal property values, and the development of the basic techniques for estimating the thermal property values of solid materials are aimed at and advanced. These are explained. (K.I.)

Standoff Detection Technology Evaluation Facility

Data.gov (United States)

Federal Laboratory Consortium — The Standoff Detection Technology Evaluation facility is the only one of its kind in the country and allows researchers to release a known amount of material while...

Technology evaluation for time sensitive data transport

DEFF Research Database (Denmark)

Wessing, Henrik; Breach, Tony; Colmenero, Alberto

. The NREN communities must provide underlying network infrastructures and transport technologies to facilitate ser-vices with such requirements to the network. In this paper we investigate and evaluate circuit and packet based transport technologies from classic best effort IP over MPLS flavours, Provider...... Backbone Bridging (PBB), “Transparent Interconnect of Lots of Links” (TRILL) to Optical Transport Network (OTN) and SDH. The transport technologies are evaluated theoreti-cally, using simulations and/or experimentally. Each transport technology is evaluated based on its performances and capabilities...... overhead and restoration time. Thirdly, complexity and automation possibilities for establishment of paths for high demanding applica-tions, and finally how the technologies are backed by research communities and major vendors like Ciena, Alcatel-Lucent, Nokia-Siemens and Huawei. The technologies...

A snapshot of research in learning technology

Directory of Open Access Journals (Sweden)

Rhona Sharpe

2010-12-01

Full Text Available The papers in this issue present a convenient snapshot of current research in learning technology, both in their coverage of the issues that concern us and the methods that are being used to investigate them. This issue shows that e-learning researchers are interested in: what technologies are available and explorations of their potential (Nie et al. explore the role of podcasting, how to design technology-mediated learning activities in ways which support specific learning outcomes (Simpson evaluates the role of ‘book raps' in supporting critical thinking, the identification of critical success factors in implementations (Cochrane's observation of three mobile learning projects and how such e-learning initiatives can be sustained within an institutional context (Gunn's examination of the challenges of embedding ‘grass roots' initiatives. Finally e-learning research is concerned with investigating the impact of emerging technologies on education – in this case Traxler's discussion of mobile, largely student-owned, devices. Together these five papers demonstrate the scope of research in learning technology and it is with this in mind that we will soon be referring to this journal by its subtitle: Research in Learning Technology.

Enhancing public involvement in assistive technology design research.

Science.gov (United States)

Williamson, Tracey; Kenney, Laurence; Barker, Anthony T; Cooper, Glen; Good, Tim; Healey, Jamie; Heller, Ben; Howard, David; Matthews, Martin; Prenton, Sarah; Ryan, Julia; Smith, Christine

2015-05-01

To appraise the application of accepted good practice guidance on public involvement in assistive technology research and to identify its impact on the research team, the public, device and trial design. Critical reflection and within-project evaluation were undertaken in a case study of the development of a functional electrical stimulation device. Individual and group interviews were undertaken with lay members of a 10 strong study user advisory group and also research team members. Public involvement was seen positively by research team members, who reported a positive impact on device and study designs. The public identified positive impact on confidence, skills, self-esteem, enjoyment, contribution to improving the care of others and opportunities for further involvement in research. A negative impact concerned the challenge of engaging the public in dissemination after the study end. The public were able to impact significantly on the design of an assistive technology device which was made more fit for purpose. Research team attitudes to public involvement were more positive after having witnessed its potential first hand. Within-project evaluation underpins this case study which presents a much needed detailed account of public involvement in assistive technology design research to add to the existing weak evidence base. The evidence base for impact of public involvement in rehabilitation technology design is in need of development. Public involvement in co-design of rehabilitation devices can lead to technologies that are fit for purpose. Rehabilitation researchers need to consider the merits of active public involvement in research.

On founding of the science and technology intelligence (STI) research system for the grand engineering research organization

International Nuclear Information System (INIS)

Li Zhimin; Tang Yong; Shi Yi; Wang Yirong

2010-01-01

This article discusses the science and technology intelligence (STI) research system for grand engineering research organization, and pose that this system should be composed of five elements of research category, research form, service patterns , quality control and fruit evaluation and precession with ability, and describes its definition, connotation and function for each element. research category includes strategy intelligence, technology route and develop trend, technology detail; research form has dynamic track, investigation and analysis, consult study; service patterns involve demand or induction service, independence or mutual action service; quality control and fruit evaluation should be conducted by a group of technologist and intelligence expert; precession with ability should be an organized system with good configuration and learning ability. (authors)

Armstrong Flight Research Center Research Technology and Engineering Report 2015

Science.gov (United States)

Voracek, David F.

2016-01-01

I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

Study on engineering technologies in the Mizunami Underground Research Laboratory. FY 2014. Development of recovery and mitigation technology on excavation damage (Contract research)

International Nuclear Information System (INIS)

Fukaya, Masaaki; Hata, Koji; Akiyoshi, Kenji; Sato, Shin; Takeda, Nobufumi; Miura, Norihiko; Uyama, Masao; Kanata, Tsutomu; Ueda, Tadashi; Hara, Akira; Torisu, Seda; Ishida, Tomoko; Sato, Toshinori; Mikake, Shinichiro; Aoyagi, Yoshiaki

2016-03-01

The researches on engineering technology in the Mizunami Underground Research Laboratory (MIU) project consist of (1) development of design and construction planning technologies, (2) development of construction technology, (3) development of countermeasure technology, (4) development of technology for security and (5) development of technologies for restoration and/or reduction of the excavation damage. As a part of the second phase of the MIU project, research has been focused on the evaluation of engineering technologies including the initial design based on the data obtained during construction. In this research, examination of the plug applied to the future reflood test was conducted as a part of (5) development of technologies for restoration and/or reduction of the excavation damage relating to the engineering technology in the MIU (2014), specifically focused on (1) plug examination (e.g. functions, structure and material) and the quality control methods and (2) analytical evaluation of rock mass behavior around the plug through the reflood test. As a result, specifications of the plug were determined. These specifications should be able to meet requirements for the safety structure and surrounding rock mass against predicted maximum water pressure, temperature stress and seismic force, and for controlling the groundwater inflow, ensuring the access into the reflood gallery and the penetration performance of measurement cable. Also preliminary knowledge regarding the rock mass behavior around the plug after flooding the reflood gallery by installed plug was obtained. A CD-ROM is attached as an appendix. (J.P.N.)

Legislation on university technology transfer and research management 2012

International Nuclear Information System (INIS)

2012-02-01

This book deals with legislation on university technology transfer in 2012, which includes invention promotion act, legislation on technology transfer and promotion of industrialization, legislation on industrial education and industrial cooperation, and special legislation on venture business. It lists the legislation related research and development by government department : fundamental law of scientific technique, law on evaluation and management of domestic research development business, national science and technology council and the patent office.

Fusion research and technology records in INIS database

International Nuclear Information System (INIS)

Hillebrand, C.D.

1998-01-01

This article is a summary of a survey study ''''A survey on publications in Fusion Research and Technology. Science and Technology Indicators in Fusion R and T'''' by the same author on Fusion R and T records in the International Nuclear Information System (INIS) bibliographic database. In that study, for the first time, all scientometric and bibliometric information contained in a bibliographic database, using INIS records, is analyzed and quantified, specific to a selected field of science and technology. A variety of new science and technology indicators which can be used for evaluating research and development activities is also presented in that study that study

Methodology for evaluation of railroad technology research projects

Science.gov (United States)

1981-04-01

This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

Evaluation of User Acceptance of Mixed Reality Technology

Science.gov (United States)

Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

2011-01-01

This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

PROCEEDINGS OF THE 2004 NATIONAL OILHEAT RESEARCH RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM.

Energy Technology Data Exchange (ETDEWEB)

MCDONALD,R.J.

2004-08-31

This meeting is the seventeenth oilheat industry technology meeting held since 1984 and the forth since the National Oilheat Research Alliance was formed. This year's symposium is a very important part of the effort in technology transfer, which is supported by the Oilheat Research Program under the United States Department of Energy, Building Technologies Program within the Office of Energy Efficiency and Renewable Energy. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. The conference provides a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

Materials and Components Technology Division research summary, 1992

International Nuclear Information System (INIS)

1992-11-01

The Materials and Components Technology Division (MCT) provides a research and development capability for the design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs related to nuclear energy support the development of the Integral Fast Reactor (IFR): life extension and accident analyses for light water reactors (LWRs); fuels development for research and test reactors; fusion reactor first-wall and blanket technology; and safe shipment of hazardous materials. MCT Conservation and Renewables programs include major efforts in high-temperature superconductivity, tribology, nondestructive evaluation (NDE), and thermal sciences. Fossil Energy Programs in MCT include materials development, NDE technology, and Instrumentation design. The division also has a complementary instrumentation effort in support of Arms Control Technology. Individual abstracts have been prepared for the database

Making use of research: clinical views on an evaluation of everyday technology use.

Science.gov (United States)

Nygård, Louise; Kottorp, Anders; Rosenberg, Lena

2015-01-01

The study aim was to investigate how and when an evaluation of perceived difficulty in use of everyday technology (Everyday Technology Use Questionnaire, ETUQ) could be used in clinical occupational therapy. Eight focus-group interviews were undertaken with a total of 42 participants (occupational therapists), and data were analysed with a constant comparative approach. The findings are presented in four main categories, including (i) appropriate purposes and contexts for using ETUQ, (ii) standardization versus individual flexibility, (iii) approaching everyday technology use and occupation as one whole, and (iv) synthesizing and documentation. In conclusion, the participants considered ability to use technology to be an important topic for occupational therapy, particularly in investigations of clients with subtle disabilities and in connection with discharge from hospital - but not in inpatient care. They had different views on how to integrate ETUQ with evaluations of occupational performance, and new ideas on how information about clients' ability to use technology could be utilized in interventions. They held standardized evaluations in high regard, but a paradox appeared in that many of them would use ETUQ in a non-standardized way, while simultaneously asking for a standardized output to be used in clients' medical files and to guide interventions.

Cyber security evaluation of II&C technologies

Energy Technology Data Exchange (ETDEWEB)

Thomas, Ken [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

2014-11-01

The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

Improving early cycle economic evaluation of diagnostic technologies.

Science.gov (United States)

Steuten, Lotte M G; Ramsey, Scott D

2014-08-01

The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increase the return on investment as well as patient and societal impact. This paper describes examples of 'early cycle economic evaluations' as applied to diagnostic technologies and highlights challenges in its real-time application. It shows that especially in the field of diagnostics, with rapid technological developments and a changing regulatory climate, early cycle economic evaluation can have a guiding role to improve the efficiency of the diagnostics innovation process. In the next five years the attention will move beyond the methodological and analytic challenges of early cycle economic evaluation towards the challenge of effectively applying it to improve diagnostic research and development and patient value. Future work in this area should therefore be 'strong on principles and soft on metrics', that is, the metrics that resonate most clearly with the various decision makers in this field.

Technology Base Research Project for electrochemical energy storage

Science.gov (United States)

Kinoshita, K.

1985-06-01

The DOE Electrochemical Energy Storage Program is divided into two projects: (1) the exploratory technology development and testing (ETD) project and (2) the technology base research (TBR) project. The role of the TBR Project is to perform supporting research for the advanced battery systems under development by the ETD Project, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the TBR Project is to identify the most promising electrochemical technologies and transfer them to industry and/or the ETD Project for further development and scale-up. This report summarizes the research, financial, and management activities relevant to the TBR Project in CY 1984. General problem areas addressed by the project include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the assessment of fuel-cell technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The TBR Project is divided into three major project elements: exploratory research, applied science research, and air systems research.

Research and Technology 1997

Science.gov (United States)

1998-01-01

This report highlights the challenging work accomplished during fiscal year 1997 by Ames research scientists and engineers. The work is divided into accomplishments that support the goals of NASA s four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Science, Human Exploration and Development of Space (HEDS), and Earth Science. NASA Ames Research Center s research effort in the Space, Earth, and HEDS Enterprises is focused i n large part to support Ames lead role for Astrobiology, which broadly defined is the scientific study of the origin, distribution, and future of life in the universe. This NASA initiative in Astrobiology is a broad science effort embracing basic research, technology development, and flight missions. Ames contributions to the Space Science Enterprise are focused in the areas of exobiology, planetary systems, astrophysics, and space technology. Ames supports the Earth Science Enterprise by conducting research and by developing technology with the objective of expanding our knowledge of the Earth s atmosphere and ecosystems. Finallv, Ames supports the HEDS Enterprise by conducting research, managing spaceflight projects, and developing technologies. A key objective is to understand the phenomena surrounding the effects of gravity on living things. Ames has also heen designated the Agency s Center of Evcellence for Information Technnlogv. The three cornerstones of Information Technology research at Ames are automated reasoning, human-centered computing, and high performance computing and networking.

Performance Evaluation Methods for Assistive Robotic Technology

Science.gov (United States)

Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

Ames Research Center Research and Technology 2000

Science.gov (United States)

2002-01-01

This report highlights the challenging work accomplished during fiscal year 2000 by Ames research scientists,engineers, and technologists. It discusses research and technologies that enable the Information Age, that expand the frontiers of knowledge for aeronautics and space, and that help to maintain U.S. leadership in aeronautics and space research and technology development. The accomplishments are grouped into four categories based on four of NASA's Strategic Enterprises: Aerospace Technology, Space Science, Biological and Physical Research, and Earth Science. The primary purpose of this report is to communicate knowledge-to inform our stakeholders, customer, and partners, and the people of the United States about the scope and diversity of Ames' mission,the nature of Ames' research and technolog) activities,and the stimulating challenges ahead. The accomplishments cited illustrate the contributions that Ames is willing to improve the quality of life for our citizens and the economic position of the United States in the world marketplace.

Research & Technology 2005

Science.gov (United States)

2006-01-01

This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2005. It comprises 126 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

Conducting evaluation research with children exposed to violence: How technological innovations in methodologies and data collection may enhance the process.

Science.gov (United States)

Wall, Michael A; Jenney, Angelique; Walsh, Margaret

2018-01-20

Research and program evaluation processes that engage children and youth are becoming much more common due to influences from children's rights and the acknowledgement that children have the capacity to contribute to research, both as participants and co-researchers (Roberts, 2017). Recent technological advances in the form of tablet and internet-based applications have provided researchers with additional methodological tools to better capture the voices and experiences of children and their caregivers (Livingstone & Blum-Ross, 2017). However, little has been written on the ways in which these new technological advances can improve research experiences for children who have been exposed to intimate partner and family violence, as well as other forms of traumatic experiences. This paper provides a review of current literature and a case study example of how one children's mental health agency has implemented tablet-based data collection procedures. Copyright © 2018. Published by Elsevier Ltd.

Cutting-edge technology for public health workforce training in comparative effectiveness research.

Science.gov (United States)

Salinas-Miranda, Abraham A; Nash, Michelle C; Salemi, Jason L; Mbah, Alfred K; Salihu, Hamisu M

2013-06-01

A critical mass of public health practitioners with expertise in analytic techniques and best practices in comparative effectiveness research is needed to fuel informed decisions and improve the quality of health care. The purpose of this case study is to describe the development and formative evaluation of a technology-enhanced comparative effectiveness research learning curriculum and to assess its potential utility to improve core comparative effectiveness research competencies among the public health workforce. Selected public health experts formed a multidisciplinary research collaborative and participated in the development and evaluation of a blended 15-week comprehensive e-comparative effectiveness research training program, which incorporated an array of health informatics technologies. Results indicate that research-based organizations can use a systematic, flexible, and rapid means of instructing their workforce using technology-enhanced authoring tools, learning management systems, survey research software, online communities of practice, and mobile communication for effective and creative comparative effectiveness research training of the public health workforce.

Research and Technology, 1994

Science.gov (United States)

1995-01-01

This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1994. It comprises approximately 200 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: Aeronautics, Aerospace Technology, Space Flight Systems, Engineering and Computational Support, Lewis Research Academy, and Technology Transfer. A table of contents and author index have been developed to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible.

Research and Technology, 1998

Science.gov (United States)

1999-01-01

This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1998. It comprises 134 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to he a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. At the time of publication, NASA Lewis was undergoing a name change to the NASA John H. Glenn Research Center at Lewis Field.

Analysis and evaluation of the applicability of green energy technology

Science.gov (United States)

Xu, Z. J.; Song, Y. K.

2017-11-01

With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

Research and Technology, 1995

Science.gov (United States)

1996-01-01

This report presents some of the challenging research and technology accomplished at NASA Ames Research Center during FY95. The accomplishments address almost all goals of NASA's four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Sciences, Human Exploration and Development of Space, and Mission to Planet Earth. The report's primary purpose is to inform stakeholders, customers, partners, colleagues, contractors, employees, and the American people in general about the scope and diversity of the research and technology activities. Additionally, the report will enable the reader to know how these goals are being addressed.

Mobile health technology evaluation: the mHealth evidence workshop.

Science.gov (United States)

Kumar, Santosh; Nilsen, Wendy J; Abernethy, Amy; Atienza, Audie; Patrick, Kevin; Pavel, Misha; Riley, William T; Shar, Albert; Spring, Bonnie; Spruijt-Metz, Donna; Hedeker, Donald; Honavar, Vasant; Kravitz, Richard; Lefebvre, R Craig; Mohr, David C; Murphy, Susan A; Quinn, Charlene; Shusterman, Vladimir; Swendeman, Dallas

2013-08-01

Creative use of new mobile and wearable health information and sensing technologies (mHealth) has the potential to reduce the cost of health care and improve well-being in numerous ways. These applications are being developed in a variety of domains, but rigorous research is needed to examine the potential, as well as the challenges, of utilizing mobile technologies to improve health outcomes. Currently, evidence is sparse for the efficacy of mHealth. Although these technologies may be appealing and seemingly innocuous, research is needed to assess when, where, and for whom mHealth devices, apps, and systems are efficacious. In order to outline an approach to evidence generation in the field of mHealth that would ensure research is conducted on a rigorous empirical and theoretic foundation, on August 16, 2011, researchers gathered for the mHealth Evidence Workshop at NIH. The current paper presents the results of the workshop. Although the discussions at the meeting were cross-cutting, the areas covered can be categorized broadly into three areas: (1) evaluating assessments; (2) evaluating interventions; and (3) reshaping evidence generation using mHealth. This paper brings these concepts together to describe current evaluation standards, discuss future possibilities, and set a grand goal for the emerging field of mHealth research. Published by Elsevier Inc. on behalf of American Journal of Preventive Medicine.

Energy Technology Division research summary 2001

International Nuclear Information System (INIS)

2001-01-01

The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the U.S. Department of Energy. As shown on the preceding page, the Division is organized into eight sections, four with concentrations in the materials area and four in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officer, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. This Overview highlights some major ET research areas. Research related to the operational safety of commercial light water nuclear reactors (LWRs) for the U.S. Nuclear Regulatory Commission (NRC) remains a significant area of interest for the Division. We currently have programs on environmentally assisted cracking, steam generator integrity, and the integrity of high-burnup fuel during loss-of-coolant accidents. The bulk of the NRC research work is carried out by three ET sections: Corrosion and Mechanics of Materials; Irradiation Performance; and Sensors, Instrumentation, and Nondestructive Evaluation

Evaluative conditioning of food technologies

DEFF Research Database (Denmark)

Loebnitz, Natascha; Grunert, Klaus G

2015-01-01

Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

The rehabilitation engineering research center for the advancement of cognitive technologies.

Science.gov (United States)

Heyn, Patricia Cristine; Cassidy, Joy Lucille; Bodine, Cathy

2015-02-01

Barring few exceptions, allied health professionals, engineers, manufacturers of assistive technologies (ATs), and consumer product manufacturers have developed few technologies for individuals with cognitive impairments (CIs). In 2004, the National Institute on Disability Rehabilitation Research (NIDRR) recognized the need to support research in this emergent field. They funded the first Rehabilitation Engineering Research Center for the Advancement of Cognitive Technologies (RERC-ACT). The RERC-ACT has since designed and evaluated existing and emerging technologies through rigorous research, improving upon existing AT devices, and creating new technologies for individuals with CIs. The RERC-ACT has contributed to the development and testing of AT products that assist persons with CIs to actively engage in tasks of daily living at home, school, work, and in the community. This article highlights the RERC-ACT's engineering development and research projects and discusses how current research may impact the quality of life for an aging population. © The Author(s) 2014.

Practice-centred evaluation and the privileging of care in health information technology evaluation.

Science.gov (United States)

Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

2014-06-05

Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these

Research and Technology 2000

Science.gov (United States)

2001-01-01

This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 2000. It comprises 138 short articles submitted by staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology, a table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that was reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.gre.nasa.gov/GLTRS).

Research and Technology 2002

Science.gov (United States)

Kim, Walter S.

2003-01-01

This report selectively summarizes NASA Glenn Research Center s research and technology accomplishments for fiscal year 2002. It comprises 166 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS/).

Research and Technology 2001

Science.gov (United States)

2002-01-01

This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2001. It comprises 156 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and, where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/www/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS).

Evaluating New Technology.

Science.gov (United States)

Carniol, Paul J; Heffelfinger, Ryan N; Grunebaum, Lisa D

2018-05-01

There are multiple complex issues to consider when evaluating any new technology. First evaluate the efficacy of the device. Then considering your patient population decide whether this technology brings an added benefit to your patients. If it meets these 2 criteria, then proceed to the financial analysis of acquiring this technology. The complete financial analysis has several important components that include but are not limited to cost, value, alternatives, return on investment, and associated marketing expense. Copyright © 2018 Elsevier Inc. All rights reserved.

Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Research and development of photovoltaic power generation system evaluation technology (Research and development of system evaluation technology); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu (system hyoka gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development is conducted for the acquisition of a system evaluation technique for predicting the performance of standard photovoltaic power systems and evaluation technologies applicable to residential photovoltaic power systems different from each other in terms of tilt and direction, district, solar cell type, etc. In fiscal 1999, using data collected from the Hamamatsu field test facilities and residential photovoltaic power systems installed across Japan, various design parameters, such as the irregularity compensation coefficient, temperature compensation coefficient, and the incidence compensation coefficient were determined, and, using the parameters as the secondary estimation values, design parameters were updated. In the development of simulation technologies, basic studies were made about the shadow compensation coefficient, spectral response fluctuation compensation coefficient, and the composition of polyhedral arrays. Moreover, studies were made about the estimation of large area insolation, based on the horizontal surface insolation data collected at 21 sites of residential photovoltaic power systems in the Kanto district. (NEDO)

Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

Research and Technology 1996

Science.gov (United States)

1997-01-01

This report highlights the challenging work accomplished during fiscal year 1996 by Ames research scientists, engineers, and technologists. It discusses research and technologies that enable the Information Age, that expand the frontiers of knowledge for aeronautics and space, and that help to maintain U.S. leadership in aeronautics and space research and technology development. The accomplishments span the range of goals of NASA's four Strategic Enterprises: (1) Aeronautics and Space Transportation Technology, (2) Space Science, (3) Human Exploration and Development of Space, and (4) Mission to Planet Earth. The primary purpose of this report is to communicate knowledge--to inform our stakeholders, customers, and partners, and the people of the United States about the scope and diversity of Ames' mission, the nature of Ames' research and technology activities, and the stimulating challenges ahead. The accomplishments cited illustrate the contributions that Ames is making to improve the quality of life for our citizens and the economic position of the United States in the world marketplace.

Soil washing technology evaluation

International Nuclear Information System (INIS)

Suer, A.

1995-04-01

Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

A novel hybrid MCDM model for performance evaluation of research and technology organizations based on BSC approach.

Science.gov (United States)

Varmazyar, Mohsen; Dehghanbaghi, Maryam; Afkhami, Mehdi

2016-10-01

Balanced Scorecard (BSC) is a strategic evaluation tool using both financial and non-financial indicators to determine the business performance of organizations or companies. In this paper, a new integrated approach based on the Balanced Scorecard (BSC) and multi-criteria decision making (MCDM) methods are proposed to evaluate the performance of research centers of research and technology organization (RTO) in Iran. Decision-Making Trial and Evaluation Laboratory (DEMATEL) are employed to reflect the interdependencies among BSC perspectives. Then, Analytic Network Process (ANP) is utilized to weight the indices influencing the considered problem. In the next step, we apply four MCDM methods including Additive Ratio Assessment (ARAS), Complex Proportional Assessment (COPRAS), Multi-Objective Optimization by Ratio Analysis (MOORA), and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) for ranking of alternatives. Finally, the utility interval technique is applied to combine the ranking results of MCDM methods. Weighted utility intervals are computed by constructing a correlation matrix between the ranking methods. A real case is presented to show the efficacy of the proposed approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

Finding Qualitative Research Evidence for Health Technology Assessment.

Science.gov (United States)

DeJean, Deirdre; Giacomini, Mita; Simeonov, Dorina; Smith, Andrea

2016-08-01

Health technology assessment (HTA) agencies increasingly use reviews of qualitative research as evidence for evaluating social, experiential, and ethical aspects of health technologies. We systematically searched three bibliographic databases (MEDLINE, CINAHL, and Social Science Citation Index [SSCI]) using published search filters or "hedges" and our hybrid filter to identify qualitative research studies pertaining to chronic obstructive pulmonary disease and early breast cancer. The search filters were compared in terms of sensitivity, specificity, and precision. Our screening by title and abstract revealed that qualitative research constituted only slightly more than 1% of all published research on each health topic. The performance of the published search filters varied greatly across topics and databases. Compared with existing search filters, our hybrid filter demonstrated a consistently high sensitivity across databases and topics, and minimized the resource-intensive process of sifting through false positives. We identify opportunities for qualitative health researchers to improve the uptake of qualitative research into evidence-informed policy making. © The Author(s) 2016.

Research and Technology 1995

Science.gov (United States)

1996-01-01

This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for fiscal year 1995. It comprises over 150 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: aeronautics, aerospace technology, space flight systems, engineering support, Lewis Research Academy, and technology transfer. A table of contents, an author index, and a list of NASA Headquarters program offices have been included to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors (for abstracts of these Lewis-authored reports, visit the Lewis Technical Report Server (LETRS) on the World Wide Web-http://letrs.lerc.nasa.gov/LeTRS/). In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about Lewis' research, visit us on the World Wide web-http://www.lerc.nasa.gov.

Critical technologies research: Opportunities for DOE

Energy Technology Data Exchange (ETDEWEB)

1992-12-01

Recent studies have identified a number of critical technologies that are essential to the nation`s defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy`s Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE`s capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

Critical technologies research: Opportunities for DOE

Energy Technology Data Exchange (ETDEWEB)

1992-12-01

Recent studies have identified a number of critical technologies that are essential to the nation's defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy's Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE's capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

Report of interim evaluation of Horonobe Underground Research Project Plan in FY2004

International Nuclear Information System (INIS)

2005-09-01

The research results on the ground in the first step, until 2004 FY, and the research program of drift work in the second step are evaluated. On the first step, development of the geological environment research technologies, the monitoring technologies and the basic engineering technologies in the deep underground, long period stability of geological environment, and improvement of the geological disposal technologies, and the stability evaluation methods are investigated and these research results were high in estimation. The research program in the second step contains to obtain the geological environment data at sinking shaft, the effects of sinking on the geological environment, validity of the geological environment model in the first step and around the shaft are estimated. Validity of monitoring technologies of geological environment on the ground, engineering technologies of work, maintenance and management of shaft are evaluated. The fault, upheaval, submergence, change of sea level and climate are determined by earthquakes measurements, GPS and time-stratigraphic classification. The geological disposal technologies are improved by storage of data, better model and verification of engineering element techniques. Test program of materials transition in the geological disposal system is work out. (S.Y.)

Nuclear medicine. Medical technology research

International Nuclear Information System (INIS)

Lerch, H.; Jigalin, A.

2005-01-01

Aim, method: the scientific publications in the 2003 and 2004 issues of the journal Nuklearmedizin were analyzed retrospectively with regard to the proportion of medical technology research. Results: out of a total of 73 articles examined, 9 (12%) were classified as medical technology research, that is, 8/15 of the original papers (16%) and one of the case reports (5%). Of these 9 articles, 44% (4/9) focused on the combination of molecular and morphological imaging with direct technical appliance or information technology solutions. Conclusion: medical technology research is limited in the journal's catchment area. The reason for this is related to the interdependency between divergent development dynamics in the medical technology industry's locations, the many years that the area of scintigraphic technology has been underrepresented, research policy particularly in discrepancies in the promotion of molecular imaging and a policy in which health is not perceived as a predominantly good and positive economic factor, but more as a curb to economic development. (orig.)

Space Transportation Technology Workshop: Propulsion Research and Technology

Science.gov (United States)

2000-01-01

This viewgraph presentation gives an overview of the Space Transportation Technology Workshop topics, including Propulsion Research and Technology (PR&T) project level organization, FY 2001 - 2006 project roadmap, points of contact, foundation technologies, auxiliary propulsion technology, PR&T Low Cost Turbo Rocket, and PR&T advanced reusable technologies RBCC test bed.

Health information technology needs help from primary care researchers.

Science.gov (United States)

Krist, Alex H; Green, Lee A; Phillips, Robert L; Beasley, John W; DeVoe, Jennifer E; Klinkman, Michael S; Hughes, John; Puro, Jon; Fox, Chester H; Burdick, Tim

2015-01-01

While health information technology (HIT) efforts are beginning to yield measurable clinical benefits, more is needed to meet the needs of patients and clinicians. Primary care researchers are uniquely positioned to inform the evidence-based design and use of technology. Research strategies to ensure success include engaging patient and clinician stakeholders, working with existing practice-based research networks, and using established methods from other fields such as human factors engineering and implementation science. Policies are needed to help support primary care researchers in evaluating and implementing HIT into everyday practice, including expanded research funding, strengthened partnerships with vendors, open access to information systems, and support for the Primary Care Extension Program. Through these efforts, the goal of improved outcomes through HIT can be achieved. © Copyright 2015 by the American Board of Family Medicine.

Korea-China Optical Technology Research Centre

Energy Technology Data Exchange (ETDEWEB)

Kim, Cheol Jung; Cha, H. K.; Rhee, Y. J. (and others)

2007-04-15

The main objectives of this project are to develop cooperative channel by personnel exchanges between industrial, educational and research partners of Korea and China on the fields of optical technologies which are the basis of optical industry and being spot-lighted as new industry of 21th century, and to raise the class of Korean optical technology up to world class by utilization of Chinese large facilities through the cooperative research between the optical technology institutions of both sides. To attain the goals mentioned above, we carried out the cooperative researches between the Korean and Chinese optical technology institutions in the following 7 fields; ? research cooperation between KAERI-SITP for the quantum structured far-IR sensor technology - research cooperation for the generation of femtosecond nuclear fusion induced neutrons - research cooperation between KAERI-AIOFM for laser environment analysis and remote sensing technology - research cooperation between KAERI-SIOM for advanced diode-pumped laser technology - cooperative research related on linear and nonlinear magneto-optical properties of advanced magnetic quantum structures - design of pico-second PW high power laser system and its simulation and - cooperative research related on the femto-second laser-plasma interaction physics.

Korea-China Optical Technology Research Centre

International Nuclear Information System (INIS)

Kim, Cheol Jung; Cha, H. K.; Rhee, Y. J.

2007-04-01

The main objectives of this project are to develop cooperative channel by personnel exchanges between industrial, educational and research partners of Korea and China on the fields of optical technologies which are the basis of optical industry and being spot-lighted as new industry of 21th century, and to raise the class of Korean optical technology up to world class by utilization of Chinese large facilities through the cooperative research between the optical technology institutions of both sides. To attain the goals mentioned above, we carried out the cooperative researches between the Korean and Chinese optical technology institutions in the following 7 fields; ? research cooperation between KAERI-SITP for the quantum structured far-IR sensor technology - research cooperation for the generation of femtosecond nuclear fusion induced neutrons - research cooperation between KAERI-AIOFM for laser environment analysis and remote sensing technology - research cooperation between KAERI-SIOM for advanced diode-pumped laser technology - cooperative research related on linear and nonlinear magneto-optical properties of advanced magnetic quantum structures - design of pico-second PW high power laser system and its simulation and - cooperative research related on the femto-second laser-plasma interaction physics

Thrust Area Report, Engineering Research, Development and Technology

Energy Technology Data Exchange (ETDEWEB)

Langland, R. T.

1997-02-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

Science.gov (United States)

Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

2017-03-01

Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Research on the use of data fusion technology to evaluate the state of electromechanical equipment

Science.gov (United States)

Lin, Lin

2018-04-01

Aiming at the problems of different testing information modes and the coexistence of quantitative and qualitative information in the state evaluation of electromechanical equipment, the paper proposes the use of data fusion technology to evaluate the state of electromechanical equipment. This paper introduces the state evaluation process of mechanical and electrical equipment in detail, uses the D-S evidence theory to fuse the decision-making layers of mechanical and electrical equipment state evaluation and carries out simulation tests. The simulation results show that it is feasible and effective to apply the data fusion technology to the state evaluation of the mechatronic equipment. After the multiple decision-making information provided by different evaluation methods are fused repeatedly and the useful information is extracted repeatedly, the fuzziness of judgment can be reduced and the state evaluation Credibility.

A Study on the Role of Web Technology in Enhancing Research Pursuance among University Academia

Science.gov (United States)

Hussain, Irshad; Durrani, Muhammad Ismail

2012-01-01

The purpose of this study was to evaluate the role of web technologies in promoting research pursuance among university teachers, examine the use of web technologies by university teachers in conducting research and identify the problems of university academia in using web technologies for research. The study was delimited to academia of social…

United States Department of Agriculture-Agricultural Research Service research in application technology for pest management.

Science.gov (United States)

Smith, L A; Thomson, S J

2003-01-01

A research summary is presented that emphasizes ARS achievements in application technology over the past 2-3 years. Research focused on the improvement of agricultural pesticide application is important from the standpoint of crop protection as well as environmental safety. Application technology research is being actively pursued within the ARS, with a primary focus on application system development, drift management, efficacy enhancement and remote sensing. Research on application systems has included sensor-controlled hooded sprayers, new approaches to direct chemical injection, and aerial electrostatic sprayers. For aerial application, great improvements in on-board flow controllers permit accurate field application of chemicals. Aircraft parameters such as boom position and spray release height are being altered to determine their effect on drift. Other drift management research has focused on testing of low-drift nozzles, evaluation of pulsed spray technologies and evaluation of drift control adjuvants. Research on the use of air curtain sprayers in orchards, air-assist sprayers for row crops and vegetables, and air deflectors on aircraft has documented improvements in application efficacy. Research has shown that the fate of applied chemicals is influenced by soil properties, and this has implications for herbicide efficacy and dissipation in the environment. Remote sensing systems are being used to target areas in the field where pests are present so that spray can be directed to only those areas. Soil and crop conditions influence propensity for weeds and insects to proliferate in any given field area. Research has indicated distinct field patterns favorable for weed growth and insect concentration, which can provide further assistance for targeted spraying.

Report of the evaluation by the Ad Hoc Review Committee on Information Technology. In-advance evaluation in fiscal year 2000

International Nuclear Information System (INIS)

2001-06-01

The Research Evaluation Committee, which consisted of 14 members from outside of the Japan Atomic Energy Research Institute (JAERI), set up an Ad Hoc Review Committee on Information Technology in accordance with the Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations in order to evaluate the adequacy of the R and D programs pertaining to the establishment and utilization of the Information Technology Based Laboratory (ITBL) to be implemented for five years starting in Fiscal Year 2001 at Center for Promotion of Computational Science and Engineering and Department of Environmental Sciences of JAERI. The Ad Hoc Review Committee consisted of eight specialists from outside of JAERI. The Ad Hoc Review Committee conducted its activities from February to March 2001. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Ad Hoc Review Committee meeting which was held on February 9, 2001, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Ad Hoc Review Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on March 16, 2001. This report describes the result of the evaluation by the Ad Hoc Review Committee on Information Technology. (author)

1991 research and technology

Science.gov (United States)

1992-01-01

Selected research and technology activities at Ames Research Center, including the Moffett Field site and the Dryden Flight Research Facility, are summarized. These activities exemplify the Center's varied and productive research efforts for 1991.

2007 Research and Technology

Science.gov (United States)

Riddlebaugh, Stephen M. (Editor)

2008-01-01

The NASA Glenn Research Center is pushing the envelope of research and technology in aeronautics, space exploration, science, and space operations. Our research in aeropropulsion, structures and materials, and instrumentation and controls is enabling next-generation transportation systems that are faster, more environmentally friendly, more fuel efficient, and safer. Our research and development of space flight systems is enabling advanced power, propulsion, communications, and human health systems that will advance the exploration of our solar system. This report selectively summarizes NASA Glenn Research Center s research and technology accomplishments for fiscal year 2007. Comprising 104 short articles submitted by the staff scientists and engineers, the report is organized into six major sections: Aeropropulsion, Power and Space Propulsion, Communications, Space Processes and Experiments, Instrumentation and Controls, and Structures and Materials. It is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year; most of the work is reported in Glenn-published technical reports, journal articles, and presentations. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained.

Energy research and energy technology

International Nuclear Information System (INIS)

Anon.

1991-01-01

Research and development in the field of energy technologies was and still is a rational necessity of our time. However, the current point of main effort has shifted from security of supply to environmental compatibility and safety of the technological processes used. Nuclear fusion is not expected to provide an extension of currently available energy resources until the middle of the next century. Its technological translation will be measured by the same conditions and issues of political acceptance that are relevant to nuclear technology today. Approaches in the major research establishments to studies of regenerative energy systems as elements of modern energy management have led to research and development programs on solar and hydrogen technologies as well as energy storage. The percentage these systems might achieve in a secured energy supply of European national economies is controversial yet today. In the future, the Arbeitsgemeinschaft Grossforschungseinrichtungen (AGF) (Cooperative of Major Research Establishments) will predominantly focus on nuclear safety research and on areas of nuclear waste disposal, which will continue to be a national task even after a reorganization of cooperation in Europe. In addition, they will above all assume tasks of nuclear plant safety research within international cooperation programs based on government agreements, in order to maintain access for the Federal Republic of Germany to an advancing development of nuclear technology in a concurrent partnership with other countries. (orig./HSCH) [de

Studies on engineering technologies in the Mizunami Underground Research Laboratory. FY 2007 (Contract research)

International Nuclear Information System (INIS)

Noda, Masaru; Suyama, Yasuhiro; Nobuto, Jun; Ijiri, Yuji; Mikake, Shinichiro; Matsui, Hiroya

2009-07-01

The Mizunami Underground Research Laboratory (MIU) of the Japan Atomic Energy Agency is a major site for geoscientific research to advance the scientific and technological basis for geological disposal of high-level radioactive waste in crystalline rock. Studies on relevant engineering technologies in the MIU consist of a) research on design and construction technology for very deep underground applications, and b) research on engineering technology as a basis of geological disposal. In the Second Phase of the MIU project (the construction phase), engineering studies have focused on research into design and construction technologies for deep underground. The main subjects in the study of very deep underground structures consist of the following: 'Demonstration of the design methodology', 'Demonstration of existing and supplementary excavation methods', 'Demonstration of countermeasures during excavation' and 'Demonstration of safe construction'. In the FY 2007 studies, identification and evaluation of the subjects for study of engineering technologies in the construction phase were carried out to optimize future research work. Specific studies included: validation of the existing design methodology based on data obtained during construction; validation of existing and supplementary rock excavation methods for very deep shafts; estimation of rock stability under high differential water pressures, methodology on long-term maintenance of underground excavations and risk management systems for construction of underground structures have been performed. Based on these studies, future research focused on the four subject areas, which are 'Demonstration of the design methodology', 'Demonstration of existing and supplementary excavation methods', 'Demonstration of countermeasures during excavation' and 'Demonstration of safe construction', has been identified. The design methodology in the first phase of the MIU Project (surface-based investigation phase) was verified to

Development and application of a probabilistic evaluation method for advanced process technologies

Energy Technology Data Exchange (ETDEWEB)

Frey, H.C.; Rubin, E.S.

1991-04-01

The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

Methodology is more than research design and technology.

Science.gov (United States)

Proctor, Robert W

2005-05-01

The Society for Computers in Psychology has been at the forefront of disseminating information about advances in computer technology and their applications for psychologists. Although technological advances, as well as clean research designs, are key contributors to progress in psychological research, the justification of methodological rules for interpreting data and making theory choices is at least as important. Historically, methodological beliefs and practices have been justified through intuition and logic, an approach known as foundationism. However, naturalism, a modern approach in the philosophy of science inspired by the work of Thomas S. Kuhn, indicates that all aspects of scientific practice, including its methodology, should be evaluated empirically. This article examines implications of the naturalistic approach for psychological research methods in general and for the current debate that is often framed as one of qualitative versus quantitative methods.

Final report of the group research. Advanced Technology for Medical Imaging Research. 1996-2000 FY

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

This report involves the organization of the research groups (4 units of radiopharmaceutical chemistry, radiotracer and radiopharmacology, clinical imaging, and molecular informative research), 5 research reports and 38 published research papers. The research reports concern Fundamental researches on the availability and production of PET radiopharmaceuticals using the National Institute of Radiological Sciences (NIRS) cyclotron, Design and evaluation of in vivo radiopharmaceuticals for PET measurement (kinetics and metabolism in small animals and primates), Fundamental studies on development of technique radiation measurement, Clinical application of medical imaging technology in the fields of neuroscience, cardiovascular, cancer diagnosis and others, and A study to establish and evaluate a lung cancer screening system using spiral CT units which is in pilot-progress in Kanto and Kansai regions. (N.I.)

Research and technology, 1991. Langley Research Center

Science.gov (United States)

1992-01-01

The mission of the NASA Langley Research Center is to increase the knowledge and capability of the United States in a full range of aeronautics disciplines and in selected space disciplines. This mission will be accomplished by performing innovative research relevant to national needs and Agency goals, transferring technology to users in a timely manner, and providing development support to other United States Government agencies, industry, and other NASA centers. Highlights are given of the major accomplishments and applications that have been made during the past year. The highlights illustrate both the broad range of the research and technology (R&T) activities at NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research.

76 FR 30696 - Technology Evaluation Process

Science.gov (United States)

2011-05-26

...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... (DOE) seeks comments and information related to a commercial buildings technology evaluation process... evaluation efforts. The goal of creating this standard process is to evaluate energy-saving technologies in a...

Research and Technology 1999

Science.gov (United States)

2000-01-01

This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 1999. It comprises 130 short articles submitted by the staff scientists and engineers. The report is organized into four major sections: Aeronautics. Research and Technology, Space, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available on the World Wide Web (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (GLTRS) on the World Wide Web (http://gltrs.grc.nasa.gov/GLTRS/).

Role of research in non-destructive evaluation for nuclear technology

International Nuclear Information System (INIS)

Jayakumar, T.; Rao, B.P.C.; Raj, Baldev

2010-01-01

This paper presents the role of research in non-destructive evaluation (NDE) of microstructures and mechanical properties in materials, assessment of manufacturing quality and early detection of in-service damage in nuclear components and structures. A few applications and case studies are discussed based on the results of systematic research and developmental activities pursued in different NDE techniques at the authors' laboratory for three different types of Indian nuclear reactors. (author)

Research and Technology 2004

Science.gov (United States)

2005-01-01

This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2004. It comprises 133 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

Where Is Current Research on Blockchain Technology?-A Systematic Review.

Science.gov (United States)

Yli-Huumo, Jesse; Ko, Deokyoon; Choi, Sujin; Park, Sooyong; Smolander, Kari

2016-01-01

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers.

FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

International Nuclear Information System (INIS)

1994-10-01

The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE's goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD's RDDT and E

Strategic Evaluation of University Knowledge and Technology Transfer Effectiveness

Science.gov (United States)

Tran, Thien Anh

2013-01-01

Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research.…

Information seeking research needs extension towards tasks and technology

Directory of Open Access Journals (Sweden)

Kalervo Järvelin

2004-01-01

Full Text Available This paper discusses the research into information seeking and its directions at a general level. We approach this topic by analysis and argumentation based on past research in the domain. We begin by presenting a general model of information seeking and retrieval (IS&R which is used to derive nine broad dimensions that are needed to analyze IS&R. Past research is then contrasted with the dimensions and shown not to cover the dimensions sufficiently. Based on an analysis of the goals of information seeking research, and a view on human task performance augmentation, it is then shown that information seeking is intimately associated with, and dependent on, other aspects of work; tasks and technology included. This leads to a discussion on design and evaluation frameworks for IS&R, based on which two action lines are proposed: information retrieval research needs extension towards more context and information seeking research needs extension towards tasks and technology.

Outlining an analytical framework for mapping research evaluation landscapes

Energy Technology Data Exchange (ETDEWEB)

Åström, F.

2016-07-01

This paper suggests an infrastructure perspective, as suggested by Star and Bowker (2006), as an analytical framework for studying the research evaluation landscape. An infrastructure is suggested to be understood, not as a concrete technology, but as a system of contextual factors including ‘Actors/Stakeholders’, ‘Technical systems’, and ‘Evaluation practices’. How the framework can be operationationalized is exemplified by examples from previous and ongoing research, as well as by identify gaps in current research. (Author)

Researchers and mine managers cooperate for better technology

International Nuclear Information System (INIS)

Anon.

1984-01-01

How cooperation between mine managers and research organizations can result in practical technology and better work methods is discussed. Specific cases of how this close cooperation has helped in the U.K., Swedish blasting experiments, linear array scanners for Australian geologic evaluation, coal preparation in Canada, and deep mine problems in South Africa are given

76 FR 37344 - Technology Evaluation Process

Science.gov (United States)

2011-06-27

...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... seeks comments and information related to a commercial buildings technology evaluation process. DOE is seeking to create a process for evaluating emerging and underutilized energy efficient technologies for...

Research and technology, 1993

Science.gov (United States)

1994-01-01

Selected research and technology activities at Ames Research Center, including the Moffett Field site and the Dryden Flight Research Facility, are summarized. These activities exemplify the center's varied and productive research efforts for 1993. This year's report presents some of the challenging work recently accomplished in the areas of aerospace systems, flight operations and research, aerophysics, and space research.

Research and Technology at the John F. Kennedy Space Center 1993

Science.gov (United States)

1993-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1993 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. Major areas of research include material science, advanced software, industrial engineering, nondestructive evaluation, life sciences, atmospheric sciences, environmental technology, robotics, and electronics and instrumentation.

Energy Technology Division research summary 1997

International Nuclear Information System (INIS)

1997-01-01

The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water nuclear

Energy Technology Division research summary 1997.

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-21

The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water

Engineering research, development and technology. Thrust area report, FY93

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

Where Is Current Research on Blockchain Technology?-A Systematic Review.

Directory of Open Access Journals (Sweden)

Jesse Yli-Huumo

Full Text Available Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers.

Research and development project for a large-scale industrial technology in fiscal 1992. Research and development of an advanced function creating and processing technology /Development of an advanced function creating and processing technology (Report on work achievements); 1992 nend senshin kino soshutsu kako gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-01-01

A joint research has been performed between the Material Engineering Technology Research Institute of the National Institute of Materials and Chemical Research of the Ministry of International Trade and Industry and the Advanced Function Creating and Processing Technology Research Association. The research themes are the 'identification of the basic conditions for production of ultra fine ceramics particles by using the hybrid high-frequency plasma process' and the 'establishment of non-destructive analysis technology for inclination functional materials'. This paper reports the achievements in fiscal 1992. The research on the inclination functional materials has performed hybridization of high-frequency plasmas and fabrication of ultra fine alumina particles, trial fabrication and evaluation on alumina-titanium mixed ultra fine particles by using the high-frequency plasma process, spraying of hydroxyapatite by using high-frequency plasma, evaluation on thick film bulk made of ultra fine particles, and trial fabrication of an ultra fine particle injection device. It was intended to evaluate quantitatively crystalline deficiency and composition distribution in the inclination functional materials for which continuous composition control is important. Therefore, a Rutherford wake scattering device was introduced and installed newly at the Material Engineering Technology Research Institute, which has improved the evaluation and experiment system at the institute. (NEDO)

The current situation and prospect of fundamental research about nuclear logging technology

International Nuclear Information System (INIS)

Zhang Feng; Wang Xinguang; Yuan Chao

2010-01-01

Nuclear logging technology is one of the important methods to evaluate complex hydrocarbon reservoir in the process of petroleum exploration and development. The fundamental research of nuclear logging is an important step of logging technology innovation. Through analyzing the current situation of the development of nuclear logging technology at home and abroad in recent years, the problems and gaps are pointed out in the field of fundamental research of nuclear logging at home, and the future development of new nuclear logging technologies is concisely analyzed. Therefore, the optimal design and processing are conducted from aspects of ray source, detector, data acquisition and processing method. In addition, the fundamental research of LWD and pulsed neutron logging technology is taken as the main breach. In the fundamental research of nuclear logging technology, innovative thinking should be expressed and the innovation should be achieved in every field of the development of nuclear logging technology. Meanwhile, the logging key lab should be taken as the platform and the latest achievement in the field of nuclear logging technology should be fully utilized. Thus, the level of independent R and D and technology innovation of logging tools will be raised and service for the exploration and development of petroleum and other mineral resources. (authors)

FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

Energy Technology Data Exchange (ETDEWEB)

1994-10-01

The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE`s goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD`s RDDT and E.

Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

Energy Technology Data Exchange (ETDEWEB)

Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

2006-09-01

The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

DOE evaluates nine alternative thermal technologies for treatment of mixed waste

International Nuclear Information System (INIS)

Anon.

1995-01-01

In June 1993, the U.S. Department of Energy's (DOE's) Office of Technology Development commissioned a study to evaluate 19 thermal technologies for treating DOE's mixed waste. The study was divided into two phases: Phase I evaluated ten conventional incineration techniques (primarily rotary kiln), and Phase II looked at nine innovative, alternative thermal treatment technologies. The treatment processes were evaluated as part of an integrated waste treatment system, which would include all of the facilities, equipment, and methods required to treat and dispose DOE mixed waste. The relative merits and life-cycle costs were then developed for each of the 19 waste treatment systems evaluated. The study also identified the additional research and development, demonstration, and testing/evaluation steps that would be necessary for the waste treatment systems to successfully treat DOE mixed waste. 3 tabs., 2 refs

Emerging Technologies for Gut Microbiome Research

Science.gov (United States)

Arnold, Jason W.; Roach, Jeffrey; Azcarate-Peril, M. Andrea

2016-01-01

Understanding the importance of the gut microbiome on modulation of host health has become a subject of great interest for researchers across disciplines. As an intrinsically multidisciplinary field, microbiome research has been able to reap the benefits of technological advancements in systems and synthetic biology, biomaterials engineering, and traditional microbiology. Gut microbiome research has been revolutionized by high-throughput sequencing technology, permitting compositional and functional analyses that were previously an unrealistic undertaking. Emerging technologies including engineered organoids derived from human stem cells, high-throughput culturing, and microfluidics assays allowing for the introduction of novel approaches will improve the efficiency and quality of microbiome research. Here, we will discuss emerging technologies and their potential impact on gut microbiome studies. PMID:27426971

Development of New Technologies for Stem Cell Research

Directory of Open Access Journals (Sweden)

Xibo Ma

2012-01-01

Full Text Available Since the 1960s, the stem cells have been extensively studied including embryonic stem cells, neural stem cells, bone marrow hematopoietic stem cells, and mesenchymal stem cells. In the recent years, several stem cells have been initially used in the treatment of diseases, such as in bone marrow transplant. At the same time, isolation and culture experimental technologies for stem cell research have been widely developed in recent years. In addition, molecular imaging technologies including optical molecular imaging, positron emission tomography, single-photon emission computed tomography, and computed tomography have been developed rapidly in recent the 10 years and have also been used in the research on disease mechanism and evaluation of treatment of disease related with stem cells. This paper will focus on recent typical isolation, culture, and observation techniques of stem cells followed by a concise introduction. Finally, the current challenges and the future applications of the new technologies in stem cells are given according to the understanding of the authors, and the paper is then concluded.

Fire-Protection Research for Energy-Technology Projects: FY 1981 year-end report

Energy Technology Data Exchange (ETDEWEB)

Hasegawa, H.K.; Alvares, N.J.; Lipska-Quinn, A.E.; Beason, D.G.; Foote, K.L.; Priante, S.J.

1982-07-20

This report summarizes research conducted in fiscal year 1981 for the DOE-supported project, Fire Protection Research for Energy Technology Projects. Initiated in 1977, this ongoing research program was conceived to advance fire protection strategies for Energy Technology Projects to keep abreast of the unique fire problems that are developing with the complexity of energy technology research. We are developing an analytical methodology through detailed study of fusion energy experiments at Lawrence Livermore National Laboratory (LLNL). Employing these facilities as models for methodology development, we are simultaneously advancing three major task areas: (1) determination of unique fire hazards of current fusion energy facilities; (2) evaluation of the ability of accepted fire management measures to meet and negate hazards; and (3) performance of unique research into problem areas we have identified to provide input into analytical fire-growth and damage-assessment models.

Fire-Protection Research for Energy-Technology Projects: FY 1981 year-end report

International Nuclear Information System (INIS)

Hasegawa, H.K.; Alvares, N.J.; Lipska-Quinn, A.E.; Beason, D.G.; Foote, K.L.; Priante, S.J.

1982-01-01

This report summarizes research conducted in fiscal year 1981 for the DOE-supported project, Fire Protection Research for Energy Technology Projects. Initiated in 1977, this ongoing research program was conceived to advance fire protection strategies for Energy Technology Projects to keep abreast of the unique fire problems that are developing with the complexity of energy technology research. We are developing an analytical methodology through detailed study of fusion energy experiments at Lawrence Livermore National Laboratory (LLNL). Employing these facilities as models for methodology development, we are simultaneously advancing three major task areas: (1) determination of unique fire hazards of current fusion energy facilities; (2) evaluation of the ability of accepted fire management measures to meet and negate hazards; and (3) performance of unique research into problem areas we have identified to provide input into analytical fire-growth and damage-assessment models

Where Is Current Research on Blockchain Technology?—A Systematic Review

Science.gov (United States)

Yli-Huumo, Jesse; Ko, Deokyoon; Park, Sooyong; Smolander, Kari

2016-01-01

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers. PMID:27695049

An evaluation of supersonic STOVL technology

Science.gov (United States)

Kidwell, G. H., Jr.; Lampkin, B. A.

1983-01-01

The purpose of this paper is to document the status of supersonic STOVL aircraft technology. The major focus is the presentation of summaries of pertinent aspects of supersonic STOVL technology, such as justification for STOVL aircraft, current designs and their recognized areas of uncertainty, recent research programs, current activities, plans, etc. The remainder of the paper is an evaluation of the performance differential between a current supersonic STOVL design and three production (or near production) fighters, one of them the AV-8B. The results indicate that there is not a large range difference between a STOL aircraft and a STOVL aircraft, and that other aspects of performance, such as field performance or combat maneuverability, may more than make up for this decrement.

Engineering Research, Development and Technology, FY95: Thrust area report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

A Training Technology Evaluation Tool

National Research Council Canada - National Science Library

Livingston, Stephen C; Dyer, Jean L; Swinson, Diadra

2005-01-01

A Training Technology Evaluation Tool was developed to help procurers and developers of training technologies to make informed decisions and to improve the overall effectiveness of training technologies...

Proposal of a model for evaluation of research and development projects in a public scientific and technological institution: a survey in CNEN

International Nuclear Information System (INIS)

Silva, Eduardo de Assumpcao

2017-01-01

Science and technology are directly related to the development of a country. The research and development projects in CNEN are financed by the direct resources of the budget of the Union and of the Development Agencies such as FINEP and CNPq. In general, project managers believe they can succeed when they complete a project on schedule, budget, and anticipated requirements, which is commonly known as a 'triple constraint' or 'iron triangle'. However, in the review of the literature, other criteria for evaluating success in projects, such as the benefits generated by society, the development of the team's capabilities, future opportunities, new technologies, among others, were verified. In this way, in order to assist the manager in the evaluation of this type of project, the present research carried out a review in the literature aiming to find concepts about success in projects and their evaluation criteria, proposed a model based on the theoretical reference and Importance and use of these criteria with the CNEN specialists, who work directly in the R and D projects of a public ICT in the nuclear area. The results showed that the criteria proposed in the model have a high degree of importance and show a decrease in the degree of utilization, suggesting that the criteria used in the model can help managers in the evaluation of these projects. (author)

Research on Rapid Identification and Evaluation Technology for Gas Formation during Underbalanced Drilling

Directory of Open Access Journals (Sweden)

Hao Wu

2017-01-01

Full Text Available The underbalanced drilling (UBD technology has been widely implemented due to its advantages in drilling efficiency improvement and cost reduction. However, this advanced technology requires very special equipment and operational mechanism, which raises multiple challenges to traditional well logging techniques. In this study, a real-time logging system (MWD/LWD and mud logging was developed and utilized during underbalanced drilling, to quickly identify and evaluate gas formation. This advanced system enables fast detection of gas formation and determining the formation type while drilling, by monitoring the changes in gas production. This real-time logging system provides a powerful technical support to the gas reservoir drilling and development. A case study has clearly shown that the interpretation and evaluation results based on the real-time logging data agree well with the results of conventional well logging. Therefore, this advanced real-time logging technique can be utilized as an effective guidance for field operation.

Identification and Evaluation of Human Factors Issues Associated with Emerging Nuclear Plant Technology

International Nuclear Information System (INIS)

O'Hara, J.M.; Higgins, J.; Brown, William S.

2009-01-01

This study has identified human performance research issues associated with the implementation of new technology in nuclear power plants (NPPs). To identify the research issues, current industry developments and trends were evaluated in the areas of reactor technology, instrumentation and control technology, human-system integration technology, and human factors engineering (HFE) methods and tools. The issues were prioritized into four categories based on evaluations provided by 14 independent subject matter experts representing vendors, utilities, research organizations and regulators. Twenty issues were categorized into the top priority category. The study also identifies the priority of each issue and the rationale for those in the top priority category. The top priority issues were then organized into research program areas of: New Concepts of Operation using Multi-agent Teams, Human-system Interface Design, Complexity Issues in Advanced Systems, Operating Experience of New and Modernized Plants, and HFE Methods and Tools. The results can serve as input to the development of a long-term strategy and plan for addressing human performance in these areas to support the safe operation of new NPPs.

Jeab at 50: coevolution of research and technology.

Science.gov (United States)

Lattal, Kennon A

2008-01-01

Evidence of how behavioral research and technology have evolved together abounds in the history of the Journal of the Experimental Analysis of Behavior (JEAB). Technology from outside the discipline (exogenous), from such disciplines as electronics and computer science, has been adapted for use in behavioral research. Technology from within the discipline (endogenous) has developed from both basic behavioral research and existing apparatus. All of these sources of technology have contributed to the corpus of behavioral research as it has evolved in JEAB. Such research, in turn, has provided the environmental pressure necessary for continuing technological evolution both within and outside the discipline. The new technology thus evolved further spurs research along in novel directions. This dynamic coevolutionary interplay between research and technology is an important variable in the past, present, and future of JEAB.

End-User Evaluations of Semantic Web Technologies

Energy Technology Data Exchange (ETDEWEB)

McCool, Rob; Cowell, Andrew J.; Thurman, David A.

2005-11-07

Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users, To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.

Research and Technology 2003

Science.gov (United States)

2004-01-01

The NASA Glenn Research Center at Lewis Field, in partnership with U.S. industries, universities, and other Government institutions, is responsible for developing critical technologies that address national priorities in aeropropulsion and space applications. Our work is focused on research for new aeropropulsion technologies, aerospace power, microgravity science (fluids and combustion), electric propulsion, and communications technologies for aeronautics, space, and aerospace applications. As NASA s premier center for aeropropulsion, aerospace power, and turbomachinery, our role is to conduct world-class research and to develop key technologies. We contribute to economic growth and national security through safe, superior, and environmentally compatible U.S. civil and military aircraft propulsion systems. Our Aerospace Power Program supports all NASA Enterprises and major programs, including the International Space Station, Advanced Space Transportation, and new initiatives in human and robotic exploration. Glenn Research Center leads NASA s research in the microgravity science disciplines of fluid physics, combustion science, and acceleration measurement. Almost every space shuttle science mission has had an experiment managed by NASA Glenn, and we have conducted a wide array of similar experiments on the International Space Station. The Glenn staff consists of over 3200 civil service employees and support service contractor personnel. Scientists and engineers comprise more than half of our workforce, with technical specialists, skilled workers, and an administrative staff supporting them. We aggressively strive for technical excellence through continuing education, increased diversity in our workforce, and continuous improvement in our management and business practices so that we can expand the boundaries of aeronautics, space, and aerospace technology. Glenn Research Center is a unique facility located in northeast Ohio. Situated on 350 acres of land adjacent

Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition study

Science.gov (United States)

Hughes, C. W.

1983-01-01

Studies were conducted by Hughes Helicopters, Inc. (HHI) for the Applied Technology Laboratory and Aeromechanics Laboratory, U.S. Army Research and Technology Laboratories (AVRADCOM) and the Ames Research Center, National Aeronautics and Space Administration (NASA). Results of predesign studies of advanced main rotor hubs, including bearingless designs, are presented in this report. In addition, the Government's rotor design goals and specifications were reviewed and evaluated. Hub concepts were designed and qualitatively evaluated in order to select the two most promising concepts for further development. Various flexure designs, control systems, and pitchcase designs were investigated during the initial phases of this study. The two designs selected for additional development were designated the V-strap and flat-strap cruciform hubs. These hubs were designed for a four bladed rotor and were sized for 18,400 pounds gross weight with the same diameter (62 feet) and solidity (23 inch chord) as the existing rotor on the Rotor Systems Research Aircraft (RSRA).

Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part B, Remedial Action

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1 and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the ranking os remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. The focus of Vol. 1, Pt. B, is RA, and it has been divided into six chapters. The first chapter is an introduction, which defines problems specific to the ER Program for ORNL. Chapter 2 provides a general overview of the TLD. Chapters 3 through 5 are organized into necessary subelement categories: RA, characterization, and robotics and automation. The final chapter contains regulatory compliance information concerning RA.

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

International Nuclear Information System (INIS)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

2004-02-01

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2004-02-15

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

Program of enhancing the Korea-USA cooperation research for the development of proliferation resistant fuel cycle technology

International Nuclear Information System (INIS)

Yang, Myung Seung; Ahn, D. H.; Ko, W. I.

2007-03-01

The objective of the Program is to develop the fuel cycle technology of GEN-IV SFR (Sodium Fast Reactor) system through the Korea-USA cooperation research in order to improve the efficiency of the technology development and to increase the transparency of the research. Since the pyroprocessing research by using actual spent nuclear fuel can not be performed in Korea at present, the active demonstration research will be performed by using the USA national research facilities under the Korea-USA cooperation. Moreover, the development of safeguards technology and the methodology for the evaluation of the proliferation resistance will also be performed under the cooperation. The current cooperation national laboratories of the safeguards and pyroprocessing technology development are LANL (Los Alamos National Lab.) and INL (Idaho National Lab.), respectively. Practical research experience and technical data for the pyroprocessing technology can be achieved through the demonstration of the inactive research results, which was performed in Korea, by using actual spent nuclear fuel. The scope of the cooperation study encompass the electrolytic reduction of oxide spent fuel, electrorefining, liquid cadmium cathode process, TRU fuel fabrication, fuel performance evaluation and related safeguards technology development

Evaluation of technological measures to cope with climate change

Energy Technology Data Exchange (ETDEWEB)

Shimizu, Hiroshi; Moriguchi, Yulchi [National Inst. for Environmental Studies, Onogawa Tsukuba (Japan)

1993-12-31

Because the global warming (climate change) is recognized as a highly probable phenomenon in the next century, the countermeasures to cope with this issue is really Important. International discussion Is progressing towards the conclusion of the treaty to stabilize global warming. Therefore, now is the time to take concrete action to reduce the emission to the greenhouse gases (GHG). To find the way to reduce the emission of the GHG, the procedure as next should be taken. (1) Systematic estimation of GHG emission (GHG analysis), (2) Identification of conventional and Innovative technologies, (3) Assessment of individual sectoral technologies, (4) Comprehensive evaluation of countermeasures as a whole. Both in the U.S.A. and Japan, this kind of research have been made independently. Among these processes, the standard methodologies should be established on the GHG analysis, the assessment of individual technologies and the comprehensive evaluation. From such a background, it is important to discuss the way to evaluate technological measures to cope with climate change between the specialist from the U.S.A. and Japan. And still required to search the possibility to establish a joint project between both countries.

The use of technology enhanced learning in health research capacity development: lessons from a cross country research partnership.

Science.gov (United States)

Byrne, E; Donaldson, L; Manda-Taylor, L; Brugha, R; Matthews, A; MacDonald, S; Mwapasa, V; Petersen, M; Walsh, A

2016-05-10

With the recognition of the need for research capacity strengthening for advancing health and development, this research capacity article explores the use of technology enhanced learning in the delivery of a collaborative postgraduate blended Master's degree in Malawi. Two research questions are addressed: (i) Can technology enhanced learning be used to develop health research capacity?, and: (ii) How can learning content be designed that is transferrable across different contexts? An explanatory sequential mixed methods design was adopted for the evaluation of technology enhanced learning in the Masters programme. A number of online surveys were administered, student participation in online activities monitored and an independent evaluation of the programme conducted. Remote collaboration and engagement are paramount in the design of a blended learning programme and support was needed for selecting the most appropriate technical tools. Internet access proved problematic despite developing the content around low bandwidth availability and training was required for students and teachers/trainers on the tools used. Varying degrees of engagement with the tools used was recorded, and the support of a learning technologist was needed to navigate through challenges faced. Capacity can be built in health research through blended learning programmes. In relation to transferability, the support required institutionally for technology enhanced learning needs to be conceptualised differently from support for face-to-face teaching. Additionally, differences in pedagogical approaches and styles between institutions, as well as existing social norms and values around communication, need to be embedded in the content development if the material is to be used beyond the pilot resource-intensive phase of a project.

Towards Personal Exposures: How Technology Is Changing Air Pollution and Health Research.

Science.gov (United States)

Larkin, A; Hystad, P

2017-12-01

We present a review of emerging technologies and how these can transform personal air pollution exposure assessment and subsequent health research. Estimating personal air pollution exposures is currently split broadly into methods for modeling exposures for large populations versus measuring exposures for small populations. Air pollution sensors, smartphones, and air pollution models capitalizing on big/new data sources offer tremendous opportunity for unifying these approaches and improving long-term personal exposure prediction at scales needed for population-based research. A multi-disciplinary approach is needed to combine these technologies to not only estimate personal exposures for epidemiological research but also determine drivers of these exposures and new prevention opportunities. While available technologies can revolutionize air pollution exposure research, ethical, privacy, logistical, and data science challenges must be met before widespread implementations occur. Available technologies and related advances in data science can improve long-term personal air pollution exposure estimates at scales needed for population-based research. This will advance our ability to evaluate the impacts of air pollution on human health and develop effective prevention strategies.

[Ecosystem services evaluation based on geographic information system and remote sensing technology: a review].

Science.gov (United States)

Li, Wen-Jie; Zhang, Shi-Huang; Wang, Hui-Min

2011-12-01

Ecosystem services evaluation is a hot topic in current ecosystem management, and has a close link with human beings welfare. This paper summarized the research progress on the evaluation of ecosystem services based on geographic information system (GIS) and remote sensing (RS) technology, which could be reduced to the following three characters, i. e., ecological economics theory is widely applied as a key method in quantifying ecosystem services, GIS and RS technology play a key role in multi-source data acquisition, spatiotemporal analysis, and integrated platform, and ecosystem mechanism model becomes a powerful tool for understanding the relationships between natural phenomena and human activities. Aiming at the present research status and its inadequacies, this paper put forward an "Assembly Line" framework, which was a distributed one with scalable characteristics, and discussed the future development trend of the integration research on ecosystem services evaluation based on GIS and RS technologies.

Development and application of a probabilistic evaluation method for advanced process technologies. Final report

Energy Technology Data Exchange (ETDEWEB)

Frey, H.C.; Rubin, E.S.

1991-04-01

The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

Collaborative Action Research on Technology Integration for Science Learning

Science.gov (United States)

Wang, Chien-Hsing; Ke, Yi-Ting; Wu, Jin-Tong; Hsu, Wen-Hua

2012-02-01

This paper briefly reports the outcomes of an action research inquiry on the use of blogs, MS PowerPoint [PPT], and the Internet as learning tools with a science class of sixth graders for project-based learning. Multiple sources of data were essential to triangulate the key findings articulated in this paper. Corresponding to previous studies, the incorporation of technology and project-based learning could motivate students in self-directed exploration. The students were excited about the autonomy over what to learn and the use of PPT to express what they learned. Differing from previous studies, the findings pointed to the lack information literacy among students. The students lacked information evaluation skills, note-taking and information synthesis. All these findings imply the importance of teaching students about information literacy and visual literacy when introducing information technology into the classroom. The authors suggest that further research should focus on how to break the culture of "copy-and-paste" by teaching the skills of note-taking and synthesis through inquiry projects for science learning. Also, further research on teacher professional development should focus on using collaboration action research as a framework for re-designing graduate courses for science teachers in order to enhance classroom technology integration.

Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

Energy Technology Data Exchange (ETDEWEB)

Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pitman, Stan G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dib, Gerges [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roy, Surajit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Good, Morris S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walker, Cody M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-07-16

The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components. This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.

Integrated technology rotor/flight research rotor hub concept definition

Science.gov (United States)

Dixon, P. G. C.

1983-01-01

Two variations of the helicopter bearingless main rotor hub concept are proposed as bases for further development in the preliminary design phase of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) program. This selection was the result of an evaluation of three bearingless hub concepts and two articulated hub concepts with elastomeric bearings. The characteristics of each concept were evaluated by means of simplified methodology. These characteristics included the assessment of stability, vulnerability, weight, drag, cost, stiffness, fatigue life, maintainability, and reliability.

1997 Annual report. Technological Research Direction

International Nuclear Information System (INIS)

Instituto Nacional de Investigaciones Nucleares

1998-01-01

This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

Economic evaluation of information technology applications on dairy farms

OpenAIRE

Asseldonk, van, M.A.P.M.

1999-01-01

The research described in this thesis focused on the economic evaluation of information technology (IT) applications on dairy farms in order to support investment decisions. The evaluation included a normative (deductive) approach and an empirical (positive) approach. The normative approach predicted potential benefits from a theoretical model of the investment, and investigated how farmers should deal with the applications. The empirical approach observed the actual effects of the i...

An inventory of evaluation studies of information technology in health care - Trends in evaluation research 1982-2002

NARCIS (Netherlands)

Ammenwerth, E.; de Keizer, N.

2005-01-01

Objectives: During the last years the significance of evaluation studies as well as the interest in adequate Methods and approaches for evaluation has grown in medical informatics. In order to put this discussion into historical perspective of evaluation research, we conducted a systematic review on

Evaluating Internal Technological Capabilities in Energy Companies

Directory of Open Access Journals (Sweden)

Mingook Lee

2016-03-01

Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

An inventory of evaluation studies of information technology in health care: trends in evaluation research 1982-2002

NARCIS (Netherlands)

Ammenwerth, Elske; de Keizer, Nicolette

2004-01-01

During the last years the significance of evaluation studies as well as the interest in adequate methods and approaches for evaluation has grown in medical informatics. In order to put this discussion into the historical context of evaluation research, we conducted a systematic overview on trends in

[Application of digital earth technology in research of traditional Chinese medicine resources].

Science.gov (United States)

Liu, Jinxin; Liu, Xinxin; Gao, Lu; Wei, Yingqin; Meng, Fanyun; Wang, Yongyan

2011-02-01

This paper describes the digital earth technology and its core technology-"3S" integration technology. The advance and promotion of the "3S" technology provide more favorable means and technical support for Chinese medicine resources survey, evaluation and appropriate zoning. Grid is a mature and popular technology that can connect all kinds of information resources. The author sums up the application of digital earth technology in the research of traditional Chinese medicine resources in recent years, and proposes the new method and technical route of investigation in traditional Chinese medicine resources, traditional Chinese medicine zoning and suitability assessment by combining the digital earth technology and grid.

National Security Technology Incubator Evaluation Process

Energy Technology Data Exchange (ETDEWEB)

None, None

2007-12-31

This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.

An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

Directory of Open Access Journals (Sweden)

Luis P. Prieto

2014-06-01

Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

Making Sense of Technologically Enhanced Learning in Context: A Research Agenda

DEFF Research Database (Denmark)

Heilesen, Simon; Jensen, Sisse Siggaard

2006-01-01

This chapter proposes that technologically enhanced learning should be understood and evaluated by means of a combination of analytical strategies. These will allow us to analyze it both as seen from the macro analytical or ‘outside’ perspective of a rich social, cultural and technological context...... university education. Problematizing some common assumptions about technologically enhanced learning the authors define ten questions that may serve as the basis for a research agenda meant to help us understand why the many visions and ideals of the online or remediated classroom are not more widely...

Evaluating technologies of oil spill surveillance

International Nuclear Information System (INIS)

Hover, G.L.

1993-01-01

Surveillance and monitoring of oil in the marine environment imposes a broad spectrum of remote sensing requirements. At the US Coast Guard Research ampersand Development Center, the environmental safety branch is sponsoring oil spill remote sensing research in four areas of technology: Synthetic aperture radar (SAR), Frequency-scanning microwave radiometry (FSR), Laser fluorosensing (LFS), and Forward-looking infrared (FLIR) imagers. SAR technology uses sophisticated signal processing to overcome prior limitations, providing images of higher and more uniform spatial acuity which may enable interpreters to more-readily distinguish petroleum slicks from others. The ability to determine the distribution of oil thickness within a slick is necessary when an estimate of oil volume is desired. Scientists at MIT have formulated a new approach to radiometric oil thickness measurement that takes advantage of recent advances in electronic component technology. The initial data collected with a prototype FSR instrument have validated the FSR concept and more work is ongoing. The Coast Guard is co-funding a program to demonstrate and evaluate the capabilities of an airborne laser fluorosensor to support oil spill response operations. During a controlled test, the instrument successfully demonstrated an ability to detect oil on water, ice, and various beach surfaces. Additional testing included different oil types and allowed for weathering. Data analysis is ongoing. Recent developments in infrared imager technology have produced a wide variety of off-the-shelf, portable cameras that could potentially provide a rapid-response spill assessment capability. The R ampersand D Center has been involved in the testing of many of these sensors

Research and Technology 1997

Science.gov (United States)

1998-01-01

NASA Lewis Research Center is responsible for developing and transferring critical technologies that address national priorities in aeropropulsion and space applications in partnership with U.S. industries, universities, and Government institutions. As NASA s designated Lead Center for Aeropropulsion, our role is to develop, verify, and transfer aeropropulsion technologies to U.S. industry. As NASA s designated Center of Excellence in Turbomachinery, our role is to develop new and innovative turbomachinery technology to improve the reliability, performance, efficiency and affordability, capacity, and environmental compatibility of future aerospace vehicles. We also maintain a science and technology development role in aeropropulsion, communications, space power and onboard propulsion, and microgravity fluid physics and combustion. We are committed to enabling non-aerospace U.S. industries to benefit directly from the technologies developed through our programs to maximize the benefit to the Nation and the return on each taxpayer s investment. In addition, we are aggressively pursuing continuous improvement in our management and business practices and striving for diversity in our workforce as together we push the edge of technology in space and aeronautics. The Lewis Research Center is a unique facility located in an important geographical area, the southwest corner of Cleveland, Ohio. Situated on 350 acres of land adjacent to the Cleveland Hopkins International Airport, Lewis comprises more than 140 buildings that include 24 major facilities and over 500 specialized research and test facilities. Additional facilities are located at Plum Brook Station, which is about 50 miles west of Cleveland. Over 3700 people staff Lewis, including civil service employees and support service contractors. Over half of them are scientists and engineers, who plan, conduct or oversee, and report on our research tasks and projects. They are assisted by technical specialists, skilled

The case for applying an early-lifecycle technology evaluation methodology to comparative evaluation of requirements engineering research

Science.gov (United States)

Feather, Martin S.

2003-01-01

The premise of this paper is taht there is a useful analogy between evaluation of proposed problem solutions and evaluation of requirements engineering research itself. Both of these application areas face the challenges of evaluation early in the lifecycle, of the need to consider a wide variety of factors, and of the need to combine inputs from multiple stakeholders in making thse evaluation and subsequent decisions.

An integrated systems-based approach to mercury research and technology development

Energy Technology Data Exchange (ETDEWEB)

Peterson, Mark J [ORNL; Brooks, Scott C [ORNL; Mathews, Teresa J [ORNL; Mayes, Melanie [ORNL; Watson, David B [ORNL; Johs, Alexander [ORNL; Mehlhorn, Tonia L [ORNL; Dickson, Johnbull O [ORNL; Mansfield, Charles [East Tennessee Technology Park (ETTP); Phillips, Elizabeth [U.S. Department of Energy (DOE); Pierce, Eric M [ORNL

2017-01-01

A 3-year strategic planning process was undertaken in Oak Ridge, Tennessee, to develop a research and technology development approach that can help guide mercury remediation in East Fork Poplar Creek (EFPC). Mercury remediation is a high priority for the US Department of Energy s (DOE s) Oak Ridge Office of Environmental Management because of large historical losses of mercury to the environment at the Y-12 National Security Complex (Y-12). Because of the extent of mercury losses and the complexities of mercury transport and fate in the stream environment, the success of conventional options for mercury remediation in the downstream sections of EFPC is uncertain. The overall Oak Ridge mercury remediation strategy focuses on mercury treatment actions at Y-12 in the short-term and research and technology development to evaluate longer-term solutions in the downstream environment. The technology development strategy is consistent with a phased, adaptive management paradigm and DOE s Technology Readiness Level guidelines. That is, early evaluation includes literature review, site characterization, and small-scale studies of a broad number of potential technologies. As more information is gathered, technologies that may have the most promise and potential remediation benefit will be chosen for more extensive and larger-scale pilot testing before being considered for remedial implementation. Field and laboratory research in EFPC is providing an improved level of understanding of mercury transport and fate processes in EFPC that will inform the development of site-specific remedial technologies. Technology development has centered on developing strategies that can mitigate the primary factors affecting mercury risks in the stream: (1) the amount of inorganic mercury available to the stream system, (2) the conversion of inorganic mercury to methylmercury, and (3) the bioaccumulation of methylmercury through the food web. Given the downstream complexities and

Application of the Human Activity Assistive Technology model for occupational therapy research.

Science.gov (United States)

Giesbrecht, Ed

2013-08-01

Theoretical models provide a framework for describing practice and integrating evidence into systematic research. There are few models that relate specifically to the provision of assistive technology in occupational therapy practice. The Human Activity Assistive Technology model is an enduring example that has continued to develop by integrating a social model of disability, concepts from occupational therapy theory and principles of assistive technology adoption and abandonment. This study first describes the core concepts of the Human Activity Assistive Technology model and reviews its development over three successive published versions. A review of the research literature reflects application of the model to clinical practice, study design, outcome measure selection and interpretation of results, particularly among occupational therapists. An evaluative framework is used to critique the adequacy of the Human Activity Assistive Technology model for practice and research, exploring attributes of clarity, simplicity, generality, accessibility and importance. Finally, recommendations are proposed for continued development of the model and research applications. Most of the existing research literature employs the Human Activity Assistive Technology model for background and study design; there is emerging evidence to support the core concepts as predictive factors. Although the concepts are generally simple, clear and applicable to occupational therapy practice and research, evolving terminology and outcomes become more complex with the conflation of integrated theories. The development of the Human Activity Assistive Technology model offers enhanced access and application for occupational therapists, but poses challenges to clarity among concepts. Suggestions are made for further development and applications of the model. © 2013 Occupational Therapy Australia.

Application Technology Research Unit

Data.gov (United States)

Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

A Review of Research Methods in Children's Technology Design

DEFF Research Database (Denmark)

Jensen, Janne Jul; Skov, Mikael B.

2005-01-01

Research methods have been objects of discussions for dec-ades and defining research methods is still a quite substan-tial challenge. However, it is important to understand how research methods have been adapted in different disciplines as it potentially informs us on future directions and influ......-ences on the discipline. Inspired by previous studies from other disciplines, we conduct a survey of research methods in paper publications. 105 papers on children's technology design are classified on a two-dimensional matrix on research method and pur-pose. Our results show a strong focus on engineering of products...... as applied research and on evaluation of devel-oped products in the field or in the lab. Also, we find that much research is conducted in natural setting environments with strong focus on field studies....

Evaluation of Public E-Services and Information Technology Accessibility in Different Social Groups

Directory of Open Access Journals (Sweden)

Ramutė Naujikienė

2012-12-01

Full Text Available The purpose of this study is to develop an approach based on the social quality evaluation square model for evaluation of information technology usage in different social groups. Componential view to the accessibility of e-services including IT means providing the possibility to research the influences of different life conditions to usage of the public e-services. The task of this empirical study is directed towards revealing the differences of e-inclusion and e-services accessibility for social groups of citizens of Lithuania, and to compare this accessibility data with other EU countries.Design/methodology/approach—the approach is based on the square model of social quality evaluation of information technology usage in different social groups. The social division square model includes an assessment of quality according to the evaluation of socioeconomic security, social inclusion, social cohesion, and empowerment. Empowerment can be defined as consisting of individual or collective decisions to act on one’s own life.Findings—the results are demonstrated by the accessibility of public e-services data, which are evaluated by the quality of social group development according to IT applications. The hypothesis was confirmed that the e-government activities can be realized by properly selecting and installing technologies, and using technology facilities. E-services influence the capabilities of state officials to apply modern technology and increase the availability of e-services for social groups. Results consist of individual or collective decisions to act on one’s own life, to implementation of effective information technologies in the e-government activities and using of e-services. An important indicator is the implementation of e-services in the activity of citizens. It is submitted as the index of e-participation in dealing with the activities of citizens and the possibilities of authorities directly related with providing services

Evaluation of Public E-Services and Information Technology Accessibility in Different Social Groups

Directory of Open Access Journals (Sweden)

Ramutė Naujikienė

2013-02-01

Full Text Available The purpose of this study is to develop an approach based on the social quality evaluation square model for evaluation of information technology usage in different social groups. Componential view to the accessibility of e-services including IT means providing the possibility to research the influences of different life conditions to usage of the public e-services. The task of this empirical study is directed towards revealing the differences of e-inclusion and e-services accessibility for social groups of citizens of Lithuania, and to compare this accessibility data with other EU countries. Design/methodology/approach—the approach is based on the square model of social quality evaluation of information technology usage in different social groups. The social division square model includes an assessment of quality according to the evaluation of socioeconomic security, social inclusion, social cohesion, and empowerment. Empowerment can be defined as consisting of individual or collective decisions to act on one’s own life. Findings—the results are demonstrated by the accessibility of public e-services data, which are evaluated by the quality of social group development according to IT applications. The hypothesis was confirmed that the e-government activities can be realized by properly selecting and installing technologies, and using technology facilities. E-services influence the capabilities of state officials to apply modern technology and increase the availability of e-services for social groups. Results consist of individual or collective decisions to act on one’s own life, to implementation of effective information technologies in the e-government activities and using of e-services. An important indicator is the implementation of e-services in the activity of citizens. It is submitted as the index of e-participation in dealing with the activities of citizens and the possibilities of authorities directly related with providing

Armstrong Flight Research Center Research Technology and Engineering 2017

Science.gov (United States)

Voracek, David F. (Editor)

2018-01-01

I am delighted to present this report of accomplishments at NASA's Armstrong Flight Research Center. Our dedicated innovators possess a wealth of performance, safety, and technical capabilities spanning a wide variety of research areas involving aircraft, electronic sensors, instrumentation, environmental and earth science, celestial observations, and much more. They not only perform tasks necessary to safely and successfully accomplish Armstrong's flight research and test missions but also support NASA missions across the entire Agency. Armstrong's project teams have successfully accomplished many of the nation's most complex flight research projects by crafting creative solutions that advance emerging technologies from concept development and experimental formulation to final testing. We are developing and refining technologies for ultra-efficient aircraft, electric propulsion vehicles, a low boom flight demonstrator, air launch systems, and experimental x-planes, to name a few. Additionally, with our unique location and airborne research laboratories, we are testing and validating new research concepts. Summaries of each project highlighting key results and benefits of the effort are provided in the following pages. Technology areas for the projects include electric propulsion, vehicle efficiency, supersonics, space and hypersonics, autonomous systems, flight and ground experimental test technologies, and much more. Additional technical information is available in the appendix, as well as contact information for the Principal Investigator of each project. I am proud of the work we do here at Armstrong and am pleased to share these details with you. We welcome opportunities for partnership and collaboration, so please contact us to learn more about these cutting-edge innovations and how they might align with your needs.

Fiscal 1999 research report. Research on the long-term energy technology strategy (Basic research on the industrial technology strategy (Material technology field)); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This research clarifies the future social issues and targets of industrial technology in a material field including metal, inorganic, organic, polymer and fiber materials, and proposes the strategy for achieving such targets, based on research on changes in science and technology trend (technical innovation), and analysis on present and future industrial and technical competition powers. The future basic technologies for enhancing such competition powers are as follows: (1) Resource/energy-saving production process, (2) Design/evaluation technology for fine textures or in an atomic level, (3) Divergence toward high-purity and composite materials, (4) Improvement of a functionality, (5) Improvement of surface treatment technologies, and (6) Development of new materials and production technologies by using computer. The following 5 strategies are proposed based on the common understanding that the Japanese material industry achieves the best material technology innovation in the world by 2010: (1) Material technology strategy, (2) Strong cooperation among the industry, university and government, (3) Preparation of an intellectual base and a standardization strategy, (4) Reform of intellectual property rights, and (5) Resource strategy. (NEDO)

Social technologies and socialization of research

Directory of Open Access Journals (Sweden)

Jos Leijten

2009-09-01

Full Text Available Whether we like it or not, and how many difficulties this may pose, scientific research and technology are becoming the “property” of everybody and increasingly will become subject of public guidance and political decision making. Socialization happens because what people think, want and do has become central to the development of science and technology. Socialization of research is simply happening because it is the development characteristic of a society in which knowledge is becoming the main driving force. And just like in agricultural or industrial societies in the past it leads to (re-invent the institutions and mechanisms which allow the knowledge society to function properly.This note will further explore the developments contributing to the socialization of research and their impact on research and research institutes. It will focus more on technologies than on science per se, because applications and usage will become the main drivers.

Evaluation of the cleaner technology programme

DEFF Research Database (Denmark)

Andersen, Mikael Skou; Jørgensen, Ulrik

The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

Technology meets research 60 years of CERN technology : selected highlights

CERN Document Server

Taylor, Thomas; Treille, Daniel; Wenninger, Horst

2017-01-01

"Big" science and advanced technology are known to cross-fertilize. This book emphasizes the interplay between particle physics and technology at CERN that has led to breakthroughs in both research and technology over the laboratory's first 60 years. The innovations, often the work of individuals or by small teams, are illustrated with highlights describing selected technologies from the domains of accelerators and detectors. The book also presents the framework and conditions prevailing at CERN that enabled spectacular advances in technology and contributed to propel the European organization into the league of leading research laboratories in the world. While the book is specifically aimed at providing information for the technically interested general public, more expert readers may also appreciate the broad variety of subjects presented. Ample references are given for those who wish to further explore a given topic.

Energy Technologies Research and Education Initiative

Energy Technology Data Exchange (ETDEWEB)

Ghassemi, Abbas [New Mexico State Univ., Las Cruces, NM (United States); Ranade, Satish [New Mexico State Univ., Las Cruces, NM (United States)

2014-12-31

For this project, the intended goal of the microgrid component was to investigate issues in policy and technology that would drive higher penetration of renewable energy, and to demonstrate implementation in a utility system. The work accomplished on modeling the dynamics of photovoltaic (PV) penetration can be expanded for practical application. Using such a tool those involved in public policy can examine what the effect of a particular policy initiative, e.g., renewable portfolio standards (RPS) requirements, might be in terms of the desired targets. The work in the area of microgrid design, protection, and operation is fundamental to the development of microgrids. In particular the “Energy Delivery” paradigm provides new opportunities and business models for utilities. Ultimately, Energy Delivery could accrue significant benefits in terms of costs and resiliency. The experimental microgrid will support continued research and allow the demonstration of technology for better integration of renewables. The algal biofuels component of the project was developed to enhance the test facility and to investigate the technical and economic feasibility of a commercial-scale geothermal algal biofuels operation for replication elsewhere in the arid Southwest. The project was housed at New Mexico State University’s (NMSU’s) Geothermal Aquaculture Facility (GAF) and a design for the inoculation train and algae grow-out process was developed. The facility was upgraded with modifications to existing electrical, plumbing and structural components on the GAF and surrounding grounds. The research work was conducted on biomass-processing, harvesting, dewatering, and extraction. Additionally, research was conducted to determine viability of using low-cost, wastewater from municipal treatment plants in the cultivation units as make-up water and as a source of nutrients, including nitrogen and soluble phosphorus. Data was collected on inputs and outputs, growth evaluation and

METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

Directory of Open Access Journals (Sweden)

Samchynska Yaroslava

2014-10-01

Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

Concept-oriented research and development in information technology

CERN Document Server

Mori, Kinji

2014-01-01

This book thoroughly analyzes the relationships between concept, technology, and market-which are the main factors in shifting information technology research and development (R&D) to a new approach. It discusses unconventional methods and viewpoints of concept creation, technology innovation, and market cultivation. Featuring contributions from international experts and case studies from IBM and Hitachi, this book is perfect for graduate students in information technology, engineering, technology management, operation research, and business-as well as for R&D researchers, directors, strategis

Educational Technology Research Journals: "Journal of Research on Technology in Education," 2001-2010

Science.gov (United States)

Billings, Christopher; Nielsen, P. Lynne; Snyder, Aaron; Sorensen, Alec; West, Richard E.

2012-01-01

In this study, the authors examined the "Journal of Research on Technology in Education (JRTE)" to discover trends from 2001-2010 in the topics covered in the articles, article types (including research methods used), authorship, and citation frequency. Articles from the journal dealt mostly with PK-12 settings and focused on technology…

Applied wind energy research at the National Wind Technology Center

International Nuclear Information System (INIS)

Robinson, M.C.; Tu, P.

1997-01-01

Applied research activities currently being undertaken at the National Wind Technology Center, part of the National Renewable Energy Laboratory, in the United States, are divided into several technical disciplines. An integrated multi-disciplinary approach is urged for the future in order to evaluate advanced turbine designs. The risk associated with any new turbine development program can thus be mitigated through the provision of the advanced technology, analysis tools and innovative designs available at the Center, and wind power can be promoted as a viable renewable energy alternative. (UK)

Research and development of basic technologies for the next generation industries, 'bio-elements'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihtsu 'bio soshi'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed in order to establish basic technologies to realize new information processing incorporating high-order functions of living organisms, and bio-elements equipped with high-order functions. In the field of developing technical means to measure directly the information processing function of living organisms, detailed analysis has become possible for the first time on spatial operation of nerve activities by using two-dimensional beam measurement operation on the nerve activities. In the field of aiming at modeling, a system to realize functions effective in terms of engineering was structured by incorporating into the model the functions specific to nervous systems of visual sense and motion. In the field of element technologies, a large progress was seen in the basic technology and evaluation technology such as design and fabrication of molecules added with different functions in the LB membrane. Membranes having simple but different functions such as light beam and scent detection were manufactured, whereas a possibility of having them manifest functions as elements was verified. Furthermore, possibilities were discovered in manufacturing functional membranes by using self-organizing capability as a result of using basic properties possessed by polymers, and in realizing functions simulating plasticity of nerves. These achievements would lead to a belief that the targets of the first term research and development have been achieved nearly completely. (NEDO)

Innovative sport technology through cross-disciplinary research ...

African Journals Online (AJOL)

Innovative sport technology through cross-disciplinary research: Future of sport ... South African Journal for Research in Sport, Physical Education and Recreation ... of the advantages and disadvantages of innovative sport technology brought ...

MBR Technology: future research directions

NARCIS (Netherlands)

Brouwer, H.; Temmink, B.G.; Remy, M.J.J.; Geilvoet, S.

2005-01-01

Cutting down the operational costs of MBR technology will be the key driver for research. This article outlines some research areas and specific topics that potentially will contribute to lower costs. Special attention to these topics should be given the coming years. Long term research should focus

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 4. Research and development of a correlation and evaluation technology (Part 1); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 4. Sokan hyoka gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

This paper describes the correlation and evaluation technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. In evaluating the warm heat comfort by living scenes of workers according to the human body thermal model, the research environment was improved by expanding the systems to measure physiological volume and the warm heat environment. Findings were acquired on the relationship between body fat rate and skin temperature, and actions of artery-vein anastomosed (AVA) blood vessels. These findings were incorporated into the research to elevate the levels of applicability of the human body thermal model. In estimating the sense volume by using skin temperatures, physiological volume being the factor of variation in face skin temperatures was elucidated, and a system to measure these variations was structured. In order to acquire the physiological volume being the factor of variation in face skin temperatures, brain wave topography measurement and {alpha} frequency fluctuation and arousal evaluation and measurement were experimented, where the effectiveness thereof was verified. Analysis was also made on blood flow rate and perspiration volume related to skin temperature variation mechanism, which has provided a number of fundamental data. For the stress measuring technology, and stress relaxation by means of scent, researches were moved forward mainly on environment improvement and preliminary discussions. (NEDO)

Educational Technology Research Journals: Educational Technology Research and Development 2001-2010

Science.gov (United States)

Zaugg, Holt; Amado, Mayavel; Small, Tyler R.; West, Richard E.

2011-01-01

This article examines 10 years (2001-2010) of journal articles from "Educational Technology Research and Development" (ETR&D) to determine trends in article topics, key contributing authors, citation patterns, and methodological trends. The analysis identified several unique characteristics of this journal over the past decade, including a balance…

Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

Solar array technology evaluation program for SEPS (Solar Electrical Propulsion Stage)

Science.gov (United States)

1974-01-01

An evaluation of the technology and the development of a preliminary design for a 25 kilowatt solar array system for solar electric propulsion are discussed. The solar array has a power to weight ratio of 65 watts per kilogram. The solar array system is composed of two wings. Each wing consists of a solar array blanket, a blanket launch storage container, an extension/retraction mast assembly, a blanket tensioning system, an array electrical harness, and hardware for supporting the system for launch and in the operating position. The technology evaluation was performed to assess the applicable solar array state-of-the-art and to define supporting research necessary to achieve technology readiness for meeting the solar electric propulsion system solar array design requirements.

Study on the evaluation of decontamination and decommissioning technologies and their demands in Korea

Energy Technology Data Exchange (ETDEWEB)

Oh, Won Zin; Lee, K. W.; Jung, C. H.; Choi, W. K.; Won, H. J.; Kim, G. N.; Jung, K. J.; Chung, U. S.; Lee, D. G.; Kim, C. J.; Kim, S. H.; Chung, J. M.; Kwon, S. O. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2001-03-01

D and D market demand, the current status of the technology, technology items applicable to the domestic market and the future prospect of technologies not self-developed in Korea were evaluated. In the evaluation of D and D market demand and the current status of the technology, 1) the market demand was investigated on the D and D objects such as the research reactors, the nuclear power plants and the nuclear fuel cycle development facilities from 2001 to 2010, and 2) the technology demand for decommissioning of the nuclear power plants from 2001 to 2030 were investigated. In the evaluation of the technology items applicable to the domestic market, 1) the analysis of the technologies derived from the technology requirements on D and D objects and their related similar technologies was performed, and 2) the technology items applicable to the domestic market were derived from the evaluation of the suitability on the domestic technology requirements. The promising technologies applicable to the domestic market were derived from the integrated evaluation of the technological factors(innovation, internationally competitive power and the difficulty of the technology development), economical factors (domestic demand and substitution effect of foreign currency) and domestically applicable factors (applicability on the industry and a ripple effect). The background of the technology development such as business applicability and the technology demonstration effect through the integrated management of the decommissioning of TRIGA reactor and the uranium conversion facility was also analyzed. 10 refs., 9 figs., 28 tabs. (Author)

Workshop tools and methodologies for evaluation of energy chains and for technology perspective

Energy Technology Data Exchange (ETDEWEB)

Appert, O. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Maillard, D. [Energy and Raw Materials, 75 - Paris (France); Pumphrey, D. [Energy Cooperation, US Dept. of Energy (United States); Sverdrup, G.; Valdez, B. [National Renewable Energy Laboratory, Golden, CO (United States); Schindler, J. [LB-Systemtechnik (LBST), GmbH, Ottobrunn (Germany); His, St.; Rozakis, St. [Centre International de Recherche sur Environnement Developpement (CIRED), 94 - Nogent sur Marne (France); Sagisaka, M. [LCA Research Centre (Japan); Bjornstad, D. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States); Madre, J.L. [Institut National de Recherche sur les Transports et leur Securite, 94 - Arcueil (France); Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement le Developpement (CIRED), 94 - Nogent sur Marne (France); Ricci, A.; Criqui, P.; Chateau, B.; Bunger, U.; Jeeninga, H. [EU/DG-R (Italy); Chan, A. [National Research Council (Canada); Gielen, D. [IEA-International Energy Associates Ltd., Fairfax, VA (United States); Tosato, G.C. [Energy Technology Systems Analysis Programme (ETSAP), 75 - Paris (France); Akai, M. [Agency of Industrial Science and technology (Japan); Ziesing, H.J. [Deutsches Institut fur Wirtschaftsforschung, DIW Berlin (Germany); Leban, R. [Conservatoire National des Arts et Metiers (CNAM), 75 - Paris (France)

2005-07-01

The aims of this workshop is to better characterize the future in integrating all the dynamic interaction between the economy, the environment and the society. It offers presentations on the Hydrogen chains evaluation, the micro-economic modelling for evaluation of bio-fuel options, life cycle assessment evolution and potentialities, the consumer valuation of energy technologies attributes, the perspectives for evaluation of changing behavior, the incentive systems and barriers to social acceptability, the internalization of external costs, the endogenous technical change in long-tem energy models, ETSAP/technology dynamics in partial equilibrium energy models, very long-term energy environment modelling, ultra long-term energy technology perspectives, the socio-economic toolbox of the EU hydrogen road-map, the combined approach using technology oriented optimization and evaluation of impacts of individual policy measures and the application of a suite of basic research portfolio management tools. (A.L.B.)

Institutional Support : Centre for Research and Technology ...

International Development Research Centre (IDRC) Digital Library (Canada)

year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

Nigerian Journal of Technological Research

African Journals Online (AJOL)

The Nigerian Journal of Technological Research is a pure scientific journal with a philosophy of attempting to provide information on problem solving technology to its immediate environs and the international community. The scope of the journal is in the core areas of: Pure and Applied Sciences; Engineering Sciences; ...

FY08 Engineering Research and Technology Report

Energy Technology Data Exchange (ETDEWEB)

Minichino, C; McNichols, D

2009-02-24

This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technology development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

Research, development, demonstration, and early deployment policies for advanced-coal technology in China

International Nuclear Information System (INIS)

Zhao Lifeng; Gallagher, Kelly Sims

2007-01-01

Advanced-coal technologies will increasingly play a significant role in addressing China's multiple energy challenges. This paper introduces the current status of energy in China, evaluates the research, development, and demonstration policies for advanced-coal technologies during the Tenth Five-Year Plan, and gives policy prospects for advanced-coal technologies in the Eleventh Five-Year Plan. Early deployment policies for advanced-coal technologies are discussed and some recommendations are put forward. China has made great progress in the development of advanced-coal technologies. In terms of research, development, and demonstration of advanced-coal technologies, China has achieved breakthroughs in developing and demonstrating advanced-coal gasification, direct and indirect coal liquefaction, and key technologies of Integrated Gasification Combined Cycle (IGCC) and co-production systems. Progress on actual deployment of advanced-coal technologies has been more limited, in part due to insufficient supporting policies. Recently, industry chose Ultra Super Critical (USC) Pulverized Coal (PC) and Super Critical (SC) PC for new capacity coupled with pollution-control technology, and 300 MW Circulating Fluidized Bed (CFB) as a supplement

Moderation of Policy-Making? : Science and Technology Policy Evaluation Beyond Impact Measurement—the Case of Germany

NARCIS (Netherlands)

Kuhlmann, Stefan

1998-01-01

In the field of science and technology policies, for the most part, evaluation procedures are utilized as a way of measuring the scientific and technological quality or the socio-economic impacts of publicly funded research. Beyond this practice, could evaluation procedures be used as a medium for

Nondestructive quality evaluation technology of agricultural products

International Nuclear Information System (INIS)

Noh, Sang Ha

1997-01-01

Quality evaluation of agricultural products has been interested to many researchers for many years and as the result, several nondestructive techniques and so many papers have been reported for quality evaluation of agricultural products. These nondestructive techniques are based on the detection of mechanical, optical, electrical, electro-magnetical, dielectric and vibrational properties of agricultural products that are well correlated with certain quality factors of the products such as color, shape, firmness, sugar content, external or internal defects, moisture content, etc. The sophistication of nondestructive methods has evolved rapidly with modem technologies. In this paper an emphasis was put on reviewing some of those papers and techniques which could be led to on-line measurement for practical use.

Technology research and development

International Nuclear Information System (INIS)

Haas, G.M.; Abdov, M.A.; Baker, C.C.; Beuligmann, R.F.

1985-01-01

The U.S. Dept. of Energy discusses the new program plan, the parameters of which are a broad scientific and technology knowledge base, an attractive plasma configuration to be determined, and other issues concerning uncertainty as to what constitutes attractive fusion options to be determined in the future, and increased collaboration. Tables show changing directions in magnetic fusion energy, two examples of boundary condition impacts on long-term technology development, and priority classes of the latter. The Argonne National Laboratory comments on the relationship between science, technology and the engineering aspects of the fusion program. UCLA remarks on the role of fusion technology in the fusion program plan, particularly on results from the recent studies of FINESSE. General Dynamics offers commentary on the issues of a reduced budget, and new emphasis on science which creates an image of the program. A table illustrates technology research and development in the program plan from an industrial perspective

Evaluation methods for physical activity-promoting mobile technologies: an interdisciplinary scoping review

Directory of Open Access Journals (Sweden)

Claire McCallum

2015-10-01

Full Text Available There are many thousands of mobile apps, wearables and other technologies available to support and promote physical activity. However, the rapidly evolving nature of these technologies means that the methodologies traditionally used to evaluate the effectiveness of behaviour change interventions (such as the randomised controlled trial may not be appropriate to evaluate their effectiveness. A scoping review was conducted to identify the methods currently being used to evaluate physical activity-promoting mobile technologies across health and computing science disciplines. In addition to the range of methods used, the review explored their strengths and weaknesses. The results improve understandings of when and why to use existing methods from health and computing science. Opportunities for combining and hybridising methods across the two disciplines are also identified. The review will be used to inform the development and piloting of novel, ‘fit-for-purpose’ research designs that will allow rigorous evaluation of the effectiveness of rapidly-evolving physical activity-promoting mobile technologies and their ‘active ingredients’ to build an evidence base of what works, why and for whom.

Fiscal 1999 research report. Research on the long-term energy technology strategy (Basic research on the industrial technology strategy (Material technology field)); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This research clarifies the future social issues and targets of industrial technology in a material field including metal, inorganic, organic, polymer and fiber materials, and proposes the strategy for achieving such targets, based on research on changes in science and technology trend (technical innovation), and analysis on present and future industrial and technical competition powers. The future basic technologies for enhancing such competition powers are as follows: (1) Resource/energy-saving production process, (2) Design/evaluation technology for fine textures or in an atomic level, (3) Divergence toward high-purity and composite materials, (4) Improvement of a functionality, (5) Improvement of surface treatment technologies, and (6) Development of new materials and production technologies by using computer. The following 5 strategies are proposed based on the common understanding that the Japanese material industry achieves the best material technology innovation in the world by 2010: (1) Material technology strategy, (2) Strong cooperation among the industry, university and government, (3) Preparation of an intellectual base and a standardization strategy, (4) Reform of intellectual property rights, and (5) Resource strategy. (NEDO)

Report on preceding surveys and researches in fiscal 1999. Surveys and researches on the next generation cold emission technology; 1999 nendo jisedai cold emission gijutsu no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The cold emission (CE) technology must be developed as the base technology to realize the next generation flat panel displays, fluorescent display tubes, communication use microwave tubes, electron microscopes, electric power conversion elements, image photographing tubes, and different kinds of sensors. Therefore, this paper describes surveys and researches performed on technological problems and technological seeds in a hyperfine processing technology for cold emitters, and technologies to control, evaluate and simulate solid surface of cold emitters. Different kinds of applied devices that can be realized by using the CE technology are also surveyed and researched. Section 1 summarizes the progress in information communicating technologies and the changes in terminal utilization environment. Section 2 describes the application of a display technology for information terminals and a cold cathode. Section 3 investigates elementary technologies for developing electric field radiation display. Section 4 investigates physics and an evaluation technology for the next generation cold cathode. Section 5 describes the result of the investigations re-commissioned to Tsukuba University for measuring microscopic work function on solid surface by using the scanning probe process. Section 6 proposes a research and development project for the 'next generation CE technology'. (NEDO)

Office of Technology Development FY 1993 program summary: Office of Research and Development, Office of Demonstration, Testing and Evaluation. Revision 1

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT&E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT&E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT&E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section.

Office of Technology Development FY 1993 program summary: Office of Research and Development, Office of Demonstration, Testing and Evaluation. Revision 1

International Nuclear Information System (INIS)

1994-02-01

This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT ampersand E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT ampersand E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section

Assessment report of research and development on 'the abolition measures of nuclear facilities and associated technology development' and 'radioactive waste treatment and disposal and associated technology development' (result evaluation, in advance evaluation) and 'technology development related to reprocessing of nuclear fuel material' (In advance evaluation)

International Nuclear Information System (INIS)

2015-07-01

Japan Atomic Energy Agency (hereinafter referred to as 'JAEA') consulted the 'Evaluation Committee for Decommissioning and Radioactive Waste Management ' for result evaluation and in advance evaluation of 'The abolition measures of nuclear facilities and associated technology development' project and 'Radioactive waste treatment and disposal and associated technology development' project and 'Technology development related to reprocessing of nuclear fuel material' project in accordance with the 'Guideline for evaluation of government R and D activities', the 'Guideline for evaluation of R and D in Ministry of Education, Culture, Sports, Science and Technology (MEXT)' and the 'Operational rule for evaluation of R and D activities' by JAEA. In response to the JAEA's request, the Evaluation Committee for Decommissioning and Radioactive Waste Management, in accordance with the evaluation method as defined in the Committee deliberations and oral report and deliberation of material about the R and D project of three was conducted. This report summarizes the results of the assessment by the Committee with the Committee report. (author)

Korea-China Optical Technology Research Centre Project

International Nuclear Information System (INIS)

Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

2004-06-01

The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields

Korea-China Optical Technology Research Centre Project

Energy Technology Data Exchange (ETDEWEB)

Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

2004-06-15

The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields.

Technological Determinism in Educational Technology Research: Some Alternative Ways of Thinking about the Relationship between Learning and Technology

Science.gov (United States)

Oliver, M.

2011-01-01

This paper argues that research on the educational uses of technology frequently overemphasizes the influence of technology. Research in the field is considered a form of critical perspective, and assumptions about technology are questioned. Technological determinism is introduced, and different positions on this concept are identified. These are…

Using Technology to Improve the Objectivity of Criminal Responsibility Evaluations.

Science.gov (United States)

Vitacco, Michael J; Gottfried, Emily D; Batastini, Ashley B

2018-03-01

Criminal responsibility (or insanity) evaluations require forensic clinicians to reconstruct a defendant's decision-making abilities, behavioral control, and emotional state at the time of the criminal act. Forensic evaluators are ultimately tasked to evaluate whether an individual had the capacity to understand right from wrong, and in some jurisdictions, determine whether the defendant lacked substantial capacity to conform his behavior to the requirements of the law as a result of a threshold condition (e.g., mental illness). Insanity evaluations are inherently complex, because they require the clinician to determine someone's mental state at some point in the past (weeks, months, or even years). Recent research on insanity evaluations underscores significant problems with the reliability and validity of these evaluations. However, technological advances including social media (e.g., Facebook and Twitter), mandating that law enforcement videotape interrogations, and the use of body and dashboard cameras can aid clinicians in improving the precision and quality of insanity evaluations. This article discusses practical guidelines and ethics-related concerns regarding the use of technology to improve the objectivity of criminal responsibility evaluations. © 2018 American Academy of Psychiatry and the Law.

Research and development of basic technologies for the next generation industries, 'environment resistance strengthened elements'. Evaluation on the second term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'Taikankyo kyoka soshi'. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-31

In the research and development of the environment resistance strengthened elements with emphasis placed respectively on radiation resistance, heat resistance, and integration degree according to specific requirements in the using environments, the second term has developed an integration technology and its evaluation technology based on the achievements in the first term. In developing the heat resistant element technology, the technology to grow {beta}-SiC crystals was expanded to obtaining thin film crystals with high migratory performance by using higher temperatures. At the same time, development was performed on a technology to manufacture multiple number of transistors on one substrate, such as the doping technology and etching technology. Using this technology, schottky diodes and p-n junction elements being the basic structures of MES-FET and bipolar transistors were fabricated. In the evaluation and testing technology, the {gamma} dose measuring method using TLD was improved, the traceability of {gamma} ray irradiation amount was assured, the simplified irradiation testing method using X-ray was established, and the heat resistance testing technology for electronic parts was established. Furthermore, attempts were made on enhancing radiation resistance of the elements, such as in MOS silicon integrated circuit, bipolar silicon integrated circuit, and compound semiconductor integrated circuit. (NEDO)

Sustainability evaluation of water supply technologies

DEFF Research Database (Denmark)

Godskesen, Berit

Sustainability evaluation of water supply systems is important to include in the decision making process when planning new technologies or resources for water supply. In Denmark the motivations may be many and different for changing technology, but since water supply is based on groundwater...... the main driver is the limitations of the available resource from the groundwater bodies. The environmental impact of products and systems can be evaluated by life-cycle assessment (LCA) which is a comprehensive and dominant decision support tool capable of evaluating a water system from the cradle......-criteria decision analysis method was used to develop a decision support system and applied to the study. In this thesis a standard LCA of the drinking water supply technology of today (base case) and 4 alternative cases for water supply technologies is conducted. The standard LCA points at the case rain...

FY2012 Engineering Research & Technology Report

Energy Technology Data Exchange (ETDEWEB)

Lane, Monya

2014-07-22

This report documents engineering research, development, and technology advancements performed by LLNL during fiscal year 2012 in the following areas: computational engineering, engineering information systems, micro/nano-devices and structures, and measurement technologies.

Impact evaluation for University-Business Cooperation and Technology Transfer in higher education systems: cluster analysis

Directory of Open Access Journals (Sweden)

Tomoe Daniela Hamanaka Gusberti

2017-09-01

Full Text Available Abstract Higher education systems evolved in recent decades. Universities must not only provide society with capable professionals but also act in the market for technologies, knowledge, and ideas to promote technological development. This paper discusses the motivational performance evaluation system for technology transfer process, specifically the patterns’ evaluation of academic units considering micro-cultures and idiosyncrasies’ analysis, in the academic context of autonomy. Based on action research, the existing performance evaluation system was assessed, and multivariate cluster analysis was proposed and tested as a method to enable micro cultures’ identification and evaluation. The analysis proposed enabled a tool for reflexive discussion regarding the effectiveness of the institutional innovation system in academic units and Engineering Education, and its implications for social and technological development of industry and society enabled action proposals for improvement in the university’s technology transfer management process.

Evaluation report on research and development of high-speed computation system for technological use; Kagaku gijutsuyo kosoku keisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-08-01

The above-named project is an effort implemented under the large-scale industrial technology research and development system through the cooperation of industrial, academic, and governmental circles in the nine-year-long period beginning in fiscal 1981. The project aims to establish technologies required for putting to practical use a high-speed computation system capable of speedily dealing with huge technological problems which the computers available at the commencement of the project failed to solve. The goals set for new devices and comprehensive systems were sufficiently challenging in view of the technological level of those days, and are still at the highest level in the world. It is judged that the goals were set with reason and appropriateness. The liaison council for the implementation of the project is constituted of people of experience or academic standing, entrusted research and development activities, Ministry of International Trade and Industry bureaus concerned, and the Electrotechnical Laboratory of the same ministry. Discussion, coordination, and communication on concrete matters are under way between the constituent members, contributing to the enhancement of research and development. The liaison council activities are evaluated to be appropriate and effective. (NEDO)

Implementation of the e-learning method for technological research institutes utilization

International Nuclear Information System (INIS)

Pinheiro, Valderes Fernandes; Silva, Aucyone Augusto da; Rogero, Jose Roberto

2002-01-01

The e-learning is a subject that is attracting all teaching institution at the present because the number of interested student is growing in the same proportion of communication technology facilities is getting more easy and low cost to be used. Most of universities and colleges are adapting their classes to on-line and a new market is growing very fast all around the world. Of course that these institutions are also worried about the quality of the online teaching materials and also methodologies used to delivery them. This paper will explore some models that are being used in online classes and also will present the contribution of this research in developing a new teaching model that will applied in the technological research institutions like IPEN/CNEN-SP. This model should be technical and economical self-sufficient and it is emphasized in the customers technological needs. The model's variables are interactivity levels with the technology, use of internet tools (chat, forum, discussion list), teacher and student relationship, knowledge evaluation, etc. (author)

The study of evaluation methodology of the aging and degradation researches

International Nuclear Information System (INIS)

Cho, C. J.; Park, Z. H.; Jeong, I. S.

2001-01-01

To judge the usefulness of aging related researches like PLIM (Plant lifetime Management) and aging related degradation, et. al. in PSR(Periodic Safety Review), the evaluation methodology of the R and D have been proposed up to now are reviewed. The infometric methodology is considered to be the optimum method for the evaluation of the nuclear related researches. And finally, to increase the objectiveness and reliability of the infometric methodology in the aging and degradation researches, the indexes of safety, technology and economics are introduced. From this study, the infometric methodology has the advantage of the actual engineering evaluation in the nuclear related researches with other methodologies, but for the further research, the effective construction of DB and survey of various statistics in the technical reports and papers are needed

Experience and Enlightenment of Dutch Agricultural Research and Technology

OpenAIRE

Liu Zhen, Zhen; Hu, D.

2011-01-01

This study analyzes the achievements of agricultural science and technology, the reform of agricultural research system and technology transfer system of agricultural in the Netherlands. With case studies, it tries to find the mode of Dutch agricultural research and technology transfer system, and aims to provide suggestions to optimize agricultural research and technology transfer system in China.

Research and technology highlights, 1993

Science.gov (United States)

1994-01-01

This report contains highlights of the major accomplishments and applications that have been made by Langley researchers and by our university and industry colleagues during the past year. The highlights illustrate both the broad range of the research and technology activities supported by NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research. This report also describes some of the Center's most important research and testing facilities.

78 FR 40098 - Emerging Technology and Research Advisory Committee;

Science.gov (United States)

2013-07-03

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Assistant Secretary for Export Administration on emerging technology and research activities, including...

Comprehensive research cooperation in environmental technology in fiscal 1995; 1995 nendo kankyo gijutsu sogo kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Cooperative study was conducted on research subjects concerning water pollution preventive technologies in China and Thailand. In China, straw pulp mills were studied which were in the Institute of Light Industry Environmental Protection and the Environmental Engineering Course of Jinghua University. The following studies were jointly conducted: survey of the water quality pollution caused by waste water, investigational study on production technology and waste water treatment technology, extraction of technologies effective to preserve water quality, study/evaluation of economical efficiency of the said technologies, etc. In Thailand, cooperative research was conducted on automatic measuring technology for factory waste water in a model industrial estate of the Thai National Industrial Estate Corporation. Items for the study were a study on measuring technology for water quality environment, an investigation on the status of water quality environment in the model industrial estate, a study on automatic measuring technology for plant waste water, a study on how to use measuring data in the model industrial estate, etc. Every study enabled technical data accumulation at every research institute through field research exchanges. 24 refs., 91 figs., 45 tabs.

Fiscal 1975 Sunshine Project research report. General research on hydrogen energy subsystems and their peripheral technologies (Research on hydrogen combustion technology); 1975 nendo suiso nensho gijutsu ni kansuru kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-03-01

This research mainly aims at establishment of various conditions necessary for using hydrogen fuel. The research includes (1) properties of hydrogen-methane mixture gas, and the proposal to future R and D, (2) extraction of various problems in practical use of home or industrial combustors, and evaluation of existing technologies, (3) the environmental impact of hydrogen fuel and its reduction measures, and (4) estimation of energy structures in cities and placing of hydrogen fuel in 2000. Detailed study items are as follows. In (1), general and proper combustion characteristics of and combustion technology for hydrogen- methane mixture system. In (2), problems for every use of various gas equipment, application of various gas equipment to hydrogen, peripheral technologies, conversion from natural gas, problems of heating furnaces and hydrogen burners, combustion safety/control equipment for various combustors, water content recovery combustion system, hydrogen embrittlement, and sealing. In (3), NO{sub x} generation in hydrogen combustion and its reduction measures. In (4), problems in introduction of a hydrogen-electric power energy system to an assumed model city in 2000. (NEDO)

Research on NGN network control technology

Science.gov (United States)

Li, WenYao; Zhou, Fang; Wu, JianXue; Li, ZhiGuang

2004-04-01

Nowadays NGN (Next Generation Network) is the hotspot for discussion and research in IT section. The NGN core technology is the network control technology. The key goal of NGN is to realize the network convergence and evolution. Referring to overlay network model core on Softswitch technology, circuit switch network and IP network convergence realized. Referring to the optical transmission network core on ASTN/ASON, service layer (i.e. IP layer) and optical transmission convergence realized. Together with the distributing feature of NGN network control technology, on NGN platform, overview of combining Softswitch and ASTN/ASON control technology, the solution whether IP should be the NGN core carrier platform attracts general attention, and this is also a QoS problem on NGN end to end. This solution produces the significant practical meaning on equipment development, network deployment, network design and optimization, especially on realizing present network smooth evolving to the NGN. This is why this paper puts forward the research topic on the NGN network control technology. This paper introduces basics on NGN network control technology, then proposes NGN network control reference model, at the same time describes a realizable network structure of NGN. Based on above, from the view of function realization, NGN network control technology is discussed and its work mechanism is analyzed.

Development of life evaluation technology for nuclear power plant components

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

2001-03-15

This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

New technologies and paradigms in education and research: some reflections

Directory of Open Access Journals (Sweden)

BHAYA, A.

2013-06-01

Full Text Available This article calls attention to the fact that higher education and research worldwide is being transformed by new tools, new methods of evaluation and collaboration and so on. Although some notice has been taken of this in Brazil, by and large, there has not been much debate or discussion on the impact of these novelties on university education and research. We briefly discuss some of these new ideas and technologies and speculate on the changes that they might or should engender in the Brazilian system of higher education.

Technology teachers as researchers : philosophical and empirical technology education studies in the Swedish TUFF Research School

NARCIS (Netherlands)

Skogh, I.B.; Vries, de M.J.

2013-01-01

This book presents the scientific output of the TUFF research school in Sweden. In this school, a group of active teachers worked together on a series of educational research studies. All of those studies were related to the teaching about technology and engineering. The research program consisted

Definition and compositions of standard wastestreams for evaluation of Buried Waste Integrated Demonstration treatment technologies

International Nuclear Information System (INIS)

Bates, S.O.

1993-06-01

The Buried Waste Integrated Demonstration (BWID) Project was organized at the Idaho National Engineering Laboratory to support research, development, demonstration, testing, and evaluation of emerging technologies that offer promising solutions to remediation of buried waste. BWID will identify emerging technologies, screen them for applicability to the identified needs, select technologies for demonstration, and then evaluate the technologies based on prescribed performance objectives. The technical objective of the project is to establish solutions to Environmental Restoration and Waste Management's technological deficiencies and improve baseline remediation systems. This report establishes a set of standard wastestream compositions that will be used by BWID to evaluate the emerging technologies. Five wastestreams are proposed that use four types of waste and a nominal case that is a homogenized combination of the four wastes. The five wastestreams will provide data on the compositional extremes and indicate the technologies' effectiveness over the complete range of expected wastestream compositions

KSC Education Technology Research and Development Plan

Science.gov (United States)

Odell, Michael R. L.

2003-01-01

Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

New sensor technologies in quality evaluation of Chinese materia medica: 2010-2015.

Science.gov (United States)

Miao, Xiaosu; Cui, Qingyu; Wu, Honghui; Qiao, Yanjiang; Zheng, Yanfei; Wu, Zhisheng

2017-03-01

New sensor technologies play an important role in quality evaluation of Chinese materia medica (CMM) and include near-infrared spectroscopy, chemical imaging, electronic nose and electronic tongue. This review on quality evaluation of CMM and the application of the new sensors in this assessment is based on studies from 2010 to 2015, with prospects and opportunities for future research.

Strategies for successful evaluation and policy-making toward health care technology on the move : The case of medical lasers

NARCIS (Netherlands)

Banta, H.D.; Vondeling, H.

1994-01-01

Evaluating new health care technology that is rapidly diffusing is one of the greatest challenges to researchers and policy-makers. If no evaluation is done until the technology is mature, evaluation will not influence processes of diffusion. If evaluation is done early, it may be irrelevant when it

Evaluation of KFB-funded research on transport systems

Energy Technology Data Exchange (ETDEWEB)

Boyce, D.; Knudsen, T.; Wegener, M.

1999-09-01

This report presents an evaluation of two research projects on transport systems, which have been financed fully or partially by KFB. The projects are: l. Systems analysis of transport markets at the Division of Transport and Location Analysis in the Department of Infrastructure and Planning of the Royal Institute of Technology, Stockholm; and 2. Planning, analysis and management in traffic networks - optimization models and methods at the Division of Optimization in the Department of Mathematics at Linkoeping University. The evaluation seeks to examine the scientific quality of the research and its relevance to the academic world and society. The two project teams prepared a self-assessment of their research activities and submitted copies of relevant publications. The evaluation committee visited both institutions and engaged the teams in discussions of their results and methodology. These visits occurred on June 1 and 2, 1999. This report is based on the self-assessments of the teams, the materials submitted and the meetings with the project teams. The evaluation and recommendations presented in the report are those of the reviewers and do not necessarily represent the views of KFB

Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

International Nuclear Information System (INIS)

1994-09-01

The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section

Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-09-01

The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT. ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY

International Nuclear Information System (INIS)

PROJECT STAFF

2001-01-01

OAK A271 ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY. The General Atomics (GA) Advanced Fusion Technology Program seeks to advance the knowledge base needed for next-generation fusion experiments, and ultimately for an economical and environmentally attractive fusion energy source. To achieve this objective, they carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic and applied knowledge about these technologies. GA's Advanced Fusion Technology program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. The technology development activities take full advantage of the GA DIII-D program, the DIII-D facility and the Inertial Confinement Fusion (ICF) program and the ICF Target Fabrication facility

Proceedings of the Seminar on Research Result of Research Reactor Technology Centre 2003

International Nuclear Information System (INIS)

Endiah Puji Hastuti; Setiyanto; Taswanda Taryo; Mohammad Dhandhang Purwadi; Pinem, Surian; Tarigan, Alim; Hasibuan, Djaruddin; Kadarusmanto; Amir Hamzah

2004-05-01

The Proceeding of the Seminar on Research Result of Research Reactor Technology Centre 2003 held by P2TRR has been reported researcher are expected to use the reports as references to research activities in Science and Technology, especially in field of Nuclear Reactor. There are 27 papers which have separated index. (PPIN)

"JEAB" at 50: Coevolution of Research and Technology

Science.gov (United States)

Lattal, Kennon A.

2008-01-01

Evidence of how behavioral research and technology have evolved together abounds in the history of the "Journal of the Experimental Analysis of Behavior" ("JEAB"). Technology from outside the discipline (exogenous) from such disciplines as electronics and computer science has been adapted for use in behavioral research. Technology from within the…

GPS Technology and Human Psychological Research: A Methodological Proposal

Directory of Open Access Journals (Sweden)

Pedro S. A. Wolf

2010-10-01

Full Text Available Animal behaviorists have made extensive use of GPS technology since 1991. In contrast, psychological research has made little use of the technology, even though the technology is relatively inexpensive, familiar, and widespread. Hence, its potential for pure and applied psychological research remains untapped. We describe three methods psychologists could apply to individual differences research, clinical research, or spatial use research. In the context of individual differences research, GPS technology permits us to test hypotheses predicting specific relations among patterns of spatial use and individual differences variables. In a clinical context, GPS technology provides outcome measures that may relate to the outcome of interventions designed to treat psychological disorders that, for example, may leave a person homebound (e.g. Agoraphobia, PTSD, TBI. Finally, GPS technology provides natural measures of spatial use. We, for example, used GPS technology to quantify traffic flow and exhibit use at the Arizona Sonora Desert Museum. Interested parties could easily extend this methodology some aspects of urban planning or business usage.DOI: 10.2458/azu_jmmss.v1i1.74

Adapting qualitative research strategies to technology savvy adolescents.

Science.gov (United States)

Mason, Deanna Marie; Ide, Bette

2014-05-01

To adapt research strategies involving adolescents in a grounded theory qualitative research study by conducting email rather than face-to-face interviews. Adolescent culture relies heavily on text-based communication and teens prefer interactions mediated through technology. Traditional qualitative research strategies need to be rethought when working with adolescents. Adapting interviewing strategies to electronic environments is timely and relevant for researching adolescents. Twenty three adolescents (aged 16-21) were interviewed by email. A letter of invitation was distributed. Potential participants emailed the researcher to convey interest in participating. If the inclusion criteria were met, email interviews were initiated. Participants controlled the interviews through their rate of response to interview questions. A grounded theory methodology was employed. Initial contact with participants reiterated confidentiality and the ability to withdraw from the study at any time. Interviews began with the collection of demographic information and a broad opening based on a semi-structured interview guide. All data were permissible, including text, photos, music, videos or outside media, for example YouTube. The participant was allowed to give direction to the interview after initial questions were posed. Email interviews continued until saturation was reached in the data. Participants were enthusiastic about email interviewing. Attrition did not occur. Email interviewing gave participants more control over the research, decreased power differentials between the adolescent and researcher, allowed the study to be adapted to cultural, linguistic and developmental needs, and maintained confidentiality. As participants said that email communication was slow and they preferred instant messaging, replication in faster-paced media is recommended. Repetition in face-to-face settings is warranted to evaluate how technology may have influenced the findings. Implications for

Mapping Translation Technology Research in Translation Studies

DEFF Research Database (Denmark)

Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

2017-01-01

/Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...... section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation...... technology research as a subdiscipline of TS, and we define and discuss some basic concepts and models of the field that we use in the rest of the paper. Based on a small-scale study of papers published in TS journals between 2006 and 2016, Section 3 attempts to map relevant developments of translation...

Korea-China optical technology research centre project

Energy Technology Data Exchange (ETDEWEB)

Kim, Cheol Jung; Lee, J M; Rhee, Y J. and others

2001-09-01

The main objectives of this project are to establish the internatinal collaboration basis of optical technolgies between Korean and China through the combination of the Chinese advanced fundamental technologies with the Korea industrialization and commercialization infrastructures, by ways of exchanging scientist and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to that of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both of the countries, technical support for the investment on the optical industries in the two countries and establishment of foundation for the venture capitals are also the purpose of this project. Because the state-of-the-arts of the Chinese technologies such as aerospace engineering, military defense technology, applications to medical treatments, laser fusion research, and so on, are known to be far above those of Korean and upto one of the most advanced in the world, it is necessary that the acquisition of these technologies, resulting in the enhancement of the levels of domestic technologies in these fields, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued.

Korea-China optical technology research centre project

International Nuclear Information System (INIS)

Kim, Cheol Jung; Lee, J. M.; Rhee, Y. J. and others

2001-09-01

The main objectives of this project are to establish the internatinal collaboration basis of optical technolgies between Korean and China through the combination of the Chinese advanced fundamental technologies with the Korea industrialization and commercialization infrastructures, by ways of exchanging scientist and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to that of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both of the countries, technical support for the investment on the optical industries in the two countries and establishment of foundation for the venture capitals are also the purpose of this project. Because the state-of-the-arts of the Chinese technologies such as aerospace engineering, military defense technology, applications to medical treatments, laser fusion research, and so on, are known to be far above those of Korean and upto one of the most advanced in the world, it is necessary that the acquisition of these technologies, resulting in the enhancement of the levels of domestic technologies in these fields, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued

Research and development of basic technologies for the next generation industries, 'three-dimensional circuit elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'sanjigen kairo soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to three-dimensional circuit elements that integrate functions at ultra-high density. For the basic technology of lamination, the SOI technology suitable for the three-dimensional circuit elements was developed, and it has become possible to manufacture high-quality multi-layered crystalline structure by means of annealing that uses laser and electron beam. In addition, a lateral epitaxial technology for solid phase was developed, and the base to be applied to the three-dimensional circuit elements was established. Furthermore, the technology to put thin film circuits together would be useful for high-density integration in the future. The three-dimensional circuit makes parallel processing in each segment possible, whereas a possibility was shown that the processing can be performed at much higher speed than before. Actually a prototype three-dimensional circuit equipped with functions for parallel processing and judgment processing was fabricated. The image pre-processing which has been impossible on the real time basis in the conventional two-dimensional integrated circuit was realized in a speed as fast as milli-second order. These achievements lead to a belief that the targets for the present research and development have been achieved. (NEDO)

Engineering Research and Development and Technology thrust area report FY92

Energy Technology Data Exchange (ETDEWEB)

Langland, R.T.; Minichino, C. [eds.

1993-03-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.

Engineering Research and Development and Technology thrust area report FY92

International Nuclear Information System (INIS)

Langland, R.T.; Minichino, C.

1993-03-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering

User research & technology, pt.2

CERN Document Server

Greifeneder, Elke

2011-01-01

This e-book is Part 2 on the theme "User Research and Technology". The research covers the testing of online digital library resources using various methods. Library and information science as a field is changing and the requirements for top quality research are growing more stringent. This is typical of the experience of other professional fields as they have moved from practitioners advising practitioners to researchers building on past results. This e-book contains 12 papers on this theme.

Technology transfer from nuclear research

International Nuclear Information System (INIS)

1989-01-01

A number of processes, components and instruments developed at the Bhabha Atomic Research Centre, (BARC), Bombay, find application in industry and are available for transfer to private or public sector undertakings for commercial exploitation. The Technology Transfer Group (TTG) constituted in January 1980 identifies such processes and prototypes which can be made available for transfer. This catalogue contains brief descriptions of such technologies and they are arranged under three groups, namely, Group A containing descriptions of technologies already transferred, Group B containing descriptions of technologies ready for transfer and Group C containing descriptions of technology transfer proposals being processed. The position in the above-mentioned groups is as on 1 March 1989. The BARC has also set up a Technology Corner where laboratory models and prototypes of instruments, equipment and components are displayed. These are described in the second part of the catalogue. (M.G.B.)

Weapons of Mass Destruction Technology Evaluation and Training Range

Energy Technology Data Exchange (ETDEWEB)

Kevin Larry Young

2009-05-01

The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Research and development of photovoltaic system evaluation technology (Research and development of system evaluation technology - Photovoltaic system data book, separate volume); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu (system hyoka gijutsu no kenkyu kaihatsu bessatsu (taiyoko hatsuden system data shu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In the research and development of photovoltaic power generation system evaluation technology, great progress has been achieved in performance improvement and cost reduction as far as constituent devices such as power modules and inverters are concerned. In the designing of systems, however, quantitative elucidation of loss and power reduction factors remains insufficient. Under the circumstances, several types of photovoltaic power generation systems expected to be put to practical application in the future are taken up, test facilities are constructed which simulate them, and data are collected. The thus-collected data are utilized for research and development of evaluation techniques necessary for the improvement of photovoltaic system efficiency, such as design parameter quantification, databasing and utilization thereof, and simulation technologies, for the establishment of technologies for optimum designs and optimum operations. The data book accommodates data, arranged in an easy-to-use fashion, collected about verification test facility (interconnected systems, independent systems, and water pump systems) operation, weather conditions, and residential photovoltaic power generation systems. (NEDO)

Behavioral intervention technologies: evidence review and recommendations for future research in mental health.

Science.gov (United States)

Mohr, David C; Burns, Michelle Nicole; Schueller, Stephen M; Clarke, Gregory; Klinkman, Michael

2013-01-01

A technical expert panel convened by the Agency for Healthcare Research and Quality and the National Institute of Mental Health was charged with reviewing the state of research on behavioral intervention technologies (BITs) in mental health and identifying the top research priorities. BITs refers to behavioral and psychological interventions that use information and communication technology features to address behavioral and mental health outcomes. This study on the findings of the technical expert panel. Videoconferencing and standard telephone technologies to deliver psychotherapy have been well validated. Web-based interventions have shown efficacy across a broad range of mental health outcomes. Social media such as online support groups have produced disappointing outcomes when used alone. Mobile technologies have received limited attention for mental health outcomes. Virtual reality has shown good efficacy for anxiety and pediatric disorders. Serious gaming has received little work in mental health. Research focused on understanding reach, adherence, barriers and cost is recommended. Improvements in the collection, storage, analysis and visualization of big data will be required. New theoretical models and evaluation strategies will be required. Finally, for BITs to have a public health impact, research on implementation and application to prevention is required. Copyright © 2013 Elsevier Inc. All rights reserved.

Technology assessment and social science research on technology

International Nuclear Information System (INIS)

Thienen, V. von

1983-01-01

In a first step this bibliography wants to overcome the want of systematic scientific data compilations and evaluations of experiences in studies on technology assessment. It concentrates on the social and political aspects of the development of technologies and the decision on their utilization by presenting titles which have been published in English- and German-speaking countries in the past decade. The bibliography is divided into various chapters and subchapters. The index part contains authors' indexes and publishers' indexes, subject indexes, other bibliographies and selected periodicals. (orig.) With 1647 refs [de

Information technology research and development critical trends and issues

CERN Document Server

1985-01-01

Information Technology Research and Development: Critical Trends and Issues is a report of the Office of Technology Assessment of the United States Government on the research and development in the area of information technology. The report discusses information technology research and development - its goals, nature, issues, and strategies; environment and its changes; the roles of the participants; and the health of its field. The book then goes on to four selected case studies in information technology: advanced computer architecture; fiber optic communications; software engineering; and ar

Science, Technology and Arts Research Journal: Site Map

African Journals Online (AJOL)

Science, Technology and Arts Research Journal: Site Map. Journal Home > About the Journal > Science, Technology and Arts Research Journal: Site Map. Log in or Register to get access to full text downloads.

Science, Technology and Arts Research Journal: Journal Sponsorship

African Journals Online (AJOL)

Science, Technology and Arts Research Journal: Journal Sponsorship. Journal Home > About the Journal > Science, Technology and Arts Research Journal: Journal Sponsorship. Log in or Register to get access to full text downloads.

National Rehabilitation Hospital Assistive Technology Research Center

Science.gov (United States)

1995-10-01

Shoulder-Arm Orthoses Several years ago, the Rehabilitation Engineering Research Center (RERC) on Rehabilitation Robotics in Delaware1 identified a... exoskeletal applications for persons with disabilities. 2. Create a center of expertise in rehabilitation technology transfer that benefits persons with...AD COOPERATIVE AGREEMENT NUMBER: DAMD17-94-V-4036 TITLE: National Rehabilitation Hospital Assistive Technology- Research Center PRINCIPAL

Technology Evaluation Report: Non-destructive ...

Science.gov (United States)

Technology Evaluation Report HSRP is working to develop tools and information that will help detect the intentional introduction of chemical or biological contaminants in buildings or water systems, the containment of these contaminants, the decontamination of buildings and/or water systems, and the management of wastes generated from decontamination and cleanup operations. Evaluation of the performance of CBI Polymers’ DeconGelTM 1108, Environmental Alternatives, Inc.’s (EAI’s) Rad-Release II (RRII), Environmental Alternatives, Inc.’s SuperGel, and Intek Technologies’ LH-21. The objective of evaluating these technologies was to test their ability to remove radioactive cesium (Cs)-137 from the mixed building material coupons of brick with mortar, tile with grout, granite with mortar, all mortar and all grout coupons.

Air Force Research Laboratory Spacecraft Cryocooler Endurance Evaluation Facility Closing Report

Science.gov (United States)

Armstrong, J.; Martin, K. W.; Fraser, T.

2015-12-01

The Air Force Research Laboratory (AFRL) Spacecraft Component Thermal Research Group has been devoted to evaluating lifetime performance of space cryocooler technology for over twenty years. Long-life data is essential for confirming design lifetimes for space cryocoolers. Continuous operation in a simulated space environment is the only accepted method to test for degradation. AFRL has provided raw data and detailed evaluations to cryocooler developers for advancing the technology, correcting discovered deficiencies, and improving cryocooler designs. At AFRL, units of varying design and refrigeration cycles were instrumented in state-of-the-art experiment stands to provide spacelike conditions and were equipped with software data acquisition to track critical cryocooler operating parameters. This data allowed an assessment of the technology's ability to meet the desired lifetime and documented any long-term changes in performance. This paper will outline a final report of the various flight cryocoolers tested in our laboratory. The data summarized includes the seven cryocoolers tested during 2014-2015. These seven coolers have a combined total of 433,326 hours (49.5 years) of operation.

Mapping Translation Technology Research in Translation Studies

DEFF Research Database (Denmark)

Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

2017-01-01

section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation......Due to the growing uptake of translation technology in the language industry and its documented impact on the translation profession, translation students and scholars need in-depth and empirically founded knowledge of the nature and influences of translation technology (e.g. Christensen....../Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...

In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-04-01

The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities

Risk assessment research and technology assessment

International Nuclear Information System (INIS)

Albach, H.; Schade, D.; Sinn, H.

1991-01-01

The concepts and approaches for technology assessment, the targets and scientific principles, as well as recognizable deficits and recommendations concerning purposeful strategies for the promotion of this research field require a dialog between those concerned. Conception, deficits, and the necessary measures for risk assessment research and technology assessment were discussed as well as ethical aspects. The problematic nature of using organisms altered through genetic engineering in the open land, traffic and transport, site restoration, nuclear energy, and isotope applications were subjects particularly dealt with. (DG) [de

[Evaluation of new and emerging health technologies. Proposal for classification].

Science.gov (United States)

Prados-Torres, J D; Vidal-España, F; Barnestein-Fonseca, P; Gallo-García, C; Irastorza-Aldasoro, A; Leiva-Fernández, F

2011-01-01

Review and develop a proposal for the classification of health technologies (HT) evaluated by the Health Technology Assessment Agencies (HTAA). Peer review of AETS of the previous proposed classification of HT. Analysis of their input and suggestions for amendments. Construction of a new classification. Pilot study with physicians. Andalusian Public Health System. Spanish HTAA. Experts from HTAA. Tutors of family medicine residents. HT Update classification previously made by the research team. Peer review by Spanish HTAA. Qualitative and quantitative analysis of responses. Construction of a new and pilot study based on 12 evaluation reports of the HTAA. We obtained 11 thematic categories that are classified into 6 major head groups: 1, prevention technology; 2, diagnostic technology; 3, therapeutic technologies; 4, diagnostic and therapeutic technologies; 5, organizational technology, and 6, knowledge management and quality of care. In the pilot there was a good concordance in the classification of 8 of the 12 reports reviewed by physicians. Experts agree on 11 thematic categories of HT. A new classification of HT with double entry (Nature and purpose of HT) is proposed. APPLICABILITY: According to experts, the classification of the work of the HTAA may represent a useful tool to transfer and manage knowledge. Moreover, an adequate classification of the HTAA reports would help clinicians and other potential users to locate them and this can facilitate their dissemination. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

Creating the Future: Research and Technology

Science.gov (United States)

1998-01-01

With the many different technical talents, Marshall Space Flight Center (MSFC) continues to be an important force behind many scientific breakthroughs. The MSFC's annual report reviews the technology developments, research in space and microgravity sciences, studies in space system concepts, and technology transfer. The technology development programs include development in: (1) space propulsion and fluid management, (2) structures and dynamics, (3) materials and processes and (4) avionics and optics.

Assessment report of research and development activities in FY2014. Activity: 'Quantum beam science research' (Result evaluation)

International Nuclear Information System (INIS)

2015-09-01

Japan Atomic Energy Agency (hereafter referred to as 'JAEA') consulted an assessment committee, 'Evaluation Committee of Research Activities for Quantum Beam Science' (hereafter referred to as 'Committee') for result evaluation of 'Quantum Beam Science', in accordance with 'General Guideline for the Evaluation of Government Research and Development (R and D) Activities' by Cabinet Office, Government of Japan, 'Guideline for Evaluation of R and D in Ministry of Education, Culture, Sports, Science and Technology' and 'Regulation on Conduct for Evaluation of R and D Activities' by JAEA. In response to the JAEA's request, the Committee assessed the research program of the Quantum Beam Science Center (hereafter referred to as 'QuBS') during the period from April 2010 to September 2014. The Committee evaluated the management and research activities of QuBS based on the explanatory documents and oral presentations. (author)

JSC research and technology

Science.gov (United States)

1993-01-01

The primary roles and missions of JSC incorporate all aspects of human presence in space. Therefore, the Center is involved in the development of technology that will allow humans to stay longer in Earth orbit, allow safe flight in space, and provide capabilities to explore the Moon and Mars. The Center's technology emphasis areas include human spacecraft development, human support systems and infrastructure, and human spacecraft operations. Safety and reliability are critical requirements for the technologies that JSC pursues for long-duration use in space. One of the objectives of technology development at the Center is to give employees the opportunity to enhance their technological expertise and project management skills by defining, designing, and developing projects that are vital to the Center's strategy for the future. This report is intended to communicate within and outside the Agency our research and technology (R&T) accomplishments, as well as inform Headquarters program managers and their constituents of the significant accomplishments that have promise for future Agency programs. While not inclusive of all R&T efforts, the report presents a comprehensive summary of JSC projects in which substantial progress was made in the 1992 fiscal year. At the beginning of each project description, names of the Principal Investigator (PI) and the Technical Monitor (TM) are given, followed by their JSC mail codes or their company or university affiliations. The funding sources and technology focal points are identified in the index.

FY10 Engineering Innovations, Research and Technology Report

Energy Technology Data Exchange (ETDEWEB)

Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

2011-01-11

This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

Improving early cycle economic evaluation of diagnostic technologies

NARCIS (Netherlands)

Steuten, Lotte Maria Gertruda; Ramsey, Scott D.

2014-01-01

The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to

The Factors Affecting Definition of Research Problems in Educational Technology Researches

Science.gov (United States)

Bahçekapili, Ekrem; Bahçekapili, Tugba; Fis Erümit, Semra; Göktas, Yüksel; Sözbilir, Mustafa

2013-01-01

Research problems in a scientific research are formed after a certain process. This process starts with defining a research topic and transforms into a specific research problem or hypothesis. The aim of this study was to examine the way educational technology researchers identify their research problems. To this end, sources that educational…

Windows and Building Envelope Research and Development: A Roadmap for Emerging Technologies

Energy Technology Data Exchange (ETDEWEB)

none,

2014-02-01

This Building Technologies Office (BTO) Research and Development (R&D) Roadmap identifies priority windows and building envelope R&D areas of interest. Cost and performance targets are identified for each key R&D area. The roadmap describes the technical and market challenges to be overcome, R&D activities and milestones, key stakeholders, and potential energy savings that could result if cost and performance targets are met. Methods for improving technology performance and specific strategies for reducing installed costs and mitigating any other market barriers, which would increase the likelihood of mass-market technology adoption, are identified. This roadmap is a useful resource for public and private decision makers evaluating and pursuing high-impact R&D focused on advancing next-generation energy efficient windows and building envelope technologies.

Oil Pollution Research and Technology Plan

Science.gov (United States)

1997-04-01

Title VII of the Oil Pollution Act of 1990 (OPA 90) established the thirteen member Interagency Coordinating Committee on Oil Pollution Research (Committee). The Committee is charged with coordinating a comprehensive program of research, technology d...

The critical assessment of research traditional and new methods of evaluation

CERN Document Server

Bailin, Alan

2010-01-01

This book examines the following factors: sponsorship of research, control of the dissemination of research, effects of dominant research paradigms, financial interests of authors, publishers, and editors, role of new technologies (for example, Web 2.0).It is widely accepted among researchers and educators that the peer review process, the reputation of the publisher and examination of the author's credentials are the gold standards for assessing the quality of research and information. However, the traditional gold standards are not sufficient, and the effective evaluation of information req

Space Photovoltaic Research and Technology 1995

Science.gov (United States)

Landis, Geoffrey (Compiler)

1995-01-01

The Fourteenth Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from October 24-26, 1995. The abstracts presented in this volume report substantial progress in a variety of areas in space photovoltaics. Technical and review papers were presented in many areas, including high efficiency GaAs and InP solar cells, GaAs/Ge cells as commercial items, high efficiency multiple bandgap cells, solar cell and array technology, heteroepitaxial cells, thermophotovoltaic energy conversion, and space radiation effects. Space flight data on a variety of cells were also presented.

Health Information Technology Evaluation Framework (HITREF) Comprehensiveness as Assessed in Electronic Point-of-Care Documentation Systems Evaluations.

Science.gov (United States)

Sockolow, Paulina S; Bowles, Kathryn H; Rogers, Michelle

2015-01-01

We assessed the Health Information Technology (HIT) Reference-based Evaluation Framework (HITREF) comprehensiveness in two HIT evaluations in settings different from that in which the HITREF was developed. Clinician satisfaction themes that emerged from clinician interviews in the home care and the hospital studies were compared to the framework components. Across both studies, respondents commented on 12 of the 20 HITREF components within 5 of the 6 HITREF concepts. No new components emerged that were missing from the HITREF providing evidence that the HITREF is a comprehensive framework. HITREF use in a range of HIT evaluations by researchers new to the HITREF demonstrates that it can be used as intended. Therefore, we continue to recommend the HITREF as a comprehensive, research-based HIT evaluation framework to increase the capacity of informatics evaluators' use of best practice and evidence-based practice to support the credibility of their findings for fulfilling the purpose of program evaluation.

RESEARCH AREA -- ARTIFICIAL INTELLIGENCE CONTROL (AIR POLLUTION TECHNOLOGY BRANCH, AIR POLLUTION PREVENTION AND CONTROL DIVISION, NRMRL)

Science.gov (United States)

The Air Pollution Technology Branch (APTB) of NRMRL's Air Pollution Prevention and Control Division in Research Triangle Park, NC, has conducted several research projects for evaluating the use of artificial intelligence (AI) to improve the control of pollution control systems an...

Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2003-03-15

The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

An overview of research on technological and telecommunication development

Directory of Open Access Journals (Sweden)

Marina Budimir

2014-10-01

Full Text Available The scientific and professional research on technological and telecommunication development started in the second half of the 20th century as the use of new media and technologies began to cause structural business and social changes. A review of research published in the early 1980s revealed that the focus was mainly on the acceptance, usefulness and impact of new media and information technology on the information society, whereas research conducted at the turn of the century was mostly interdisciplinary and related to the effect of technological and telecommunication development on various scientific and professional fields. The focus of this paper is an overview of published research on information technology since the 1980s to date, as well as technological and telecommunication development in recent years based on the latest official published data. On the basis of previous research, it can be concluded that more attention needs to be directed to monitoring trends of ICT products and services in order to increase benefits and reduce the costs for active users, as well as improving infrastructure and providing information to attract passive users in order to reduce technological and telecommunication gap between developed, developing and underdeveloped countries.

Experience and Enlightenment of Dutch Agricultural Research and Technology

NARCIS (Netherlands)

Liu Zhen, Zhen; Hu, D.

2011-01-01

This study analyzes the achievements of agricultural science and technology, the reform of agricultural research system and technology transfer system of agricultural in the Netherlands. With case studies, it tries to find the mode of Dutch agricultural research and technology transfer system, and

Technological pedagogical content knowledge of prospective mathematics teachers regarding evaluation and assessment

Directory of Open Access Journals (Sweden)

Ercan Atasoy

2016-04-01

Full Text Available The ‘technology integrated assessment process’ is an innovative method to capture and determine students’ understanding of mathematics. This assessment process is claimed to provide a singular dynamism for teaching and learning activities and it is also claimed to be of the most important elements of instruction in the educational system. In this sense, this study aims to investigate technological pedagogical content knowledge (TPACK of prospective mathematics teachers regarding the ‘evaluation’ and ‘assessment’ process. To achieve this aim, the method of qualitative research was conducted with 20 teachers. Video records and lesson plans were collected and a Mathematics Teacher TPACK Development Model was utilized to reveal themes and key features of the data. The findings revealed that, although the majority of teachers stated that they would like to use technology-integrated tools in the assessment and evaluation processes, they strongly preferred to use traditional assessment and evaluation techniques, such as pen and paper activities, multiple-choice questions in virtual environments, etc. Hence, the evidence suggests that teachers would be unable to use appropriately the technological assessment process in order to reveal students’ understanding of mathematics. As seen from the teachers’ lectures, they perceived that technology would be suitable for evaluation and assessment but in a limited way.

Bipolar disorder research 2.0: Web technologies for research capacity and knowledge translation.

Science.gov (United States)

Michalak, Erin E; McBride, Sally; Barnes, Steven J; Wood, Chanel S; Khatri, Nasreen; Balram Elliott, Nusha; Parikh, Sagar V

2017-12-01

Current Web technologies offer bipolar disorder (BD) researchers many untapped opportunities for conducting research and for promoting knowledge exchange. In the present paper, we document our experiences with a variety of Web 2.0 technologies in the context of an international BD research network: The Collaborative RESearch Team to Study psychosocial issues in BD (CREST.BD). Three technologies were used as tools for enabling research within CREST.BD and for encouraging the dissemination of the results of our research: (1) the crestbd.ca website, (2) social networking tools (ie, Facebook, Twitter), and (3) several sorts of file sharing (ie YouTube, FileShare). For each Web technology, we collected quantitative assessments of their effectiveness (in reach, exposure, and engagement) over a 6-year timeframe (2010-2016). In general, many of our strategies were deemed successful for promoting knowledge exchange and other network goals. We discuss how we applied our Web analytics to inform adaptations and refinements of our Web 2.0 platforms to maximise knowledge exchange with people with BD, their supporters, and health care providers. We conclude with some general recommendations for other mental health researchers and research networks interested in pursuing Web 2.0 strategies. © 2017 John Wiley & Sons, Ltd.

Energy Smart Schools--Applied Research, Field Testing, and Technology Integration

Energy Technology Data Exchange (ETDEWEB)

Nebiat Solomon; Robin Vieira; William L. Manz; Abby Vogen; Claudia Orlando; Kimberlie A. Schryer

2004-12-01

The National Association of State Energy Officials (NASEO) in conjunction with the California Energy Commission, the Energy Center of Wisconsin, the Florida Solar Energy Center, the New York State Energy Research and Development Authority, and the Ohio Department of Development's Office of Energy Efficiency conducted a four-year, cost-share project with the U.S. Department of Energy (USDOE), Office of Energy Efficiency and Renewable Energy to focus on energy efficiency and high-performance technologies in our nation's schools. NASEO was the program lead for the MOU-State Schools Working group, established in conjunction with the USDOE Memorandum of Understanding process for collaboration among state and federal energy research and demonstration offices and organizations. The MOU-State Schools Working Group included State Energy Offices and other state energy research organizations from all regions of the country. Through surveys and analyses, the Working Group determined the school-related energy priorities of the states and established a set of tasks to be accomplished, including the installation and evaluation of microturbines, advanced daylighting research, testing of schools and classrooms, and integrated school building technologies. The Energy Smart Schools project resulted in the adoption of advanced energy efficiency technologies in both the renovation of existing schools and building of new ones; the education of school administrators, architects, engineers, and manufacturers nationwide about the energy-saving, economic, and environmental benefits of energy efficiency technologies; and improved the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in classrooms. It also provided an opportunity for states to share and replicate successful projects to increase their energy efficiency while at the same time driving down their energy costs.

Technology Estimating 2: A Process to Determine the Cost and Schedule of Space Technology Research and Development

Science.gov (United States)

Cole, Stuart K.; Wallace, Jon; Schaffer, Mark; May, M. Scott; Greenberg, Marc W.

2014-01-01

As a leader in space technology research and development, NASA is continuing in the development of the Technology Estimating process, initiated in 2012, for estimating the cost and schedule of low maturity technology research and development, where the Technology Readiness Level is less than TRL 6. NASA' s Technology Roadmap areas consist of 14 technology areas. The focus of this continuing Technology Estimating effort included four Technology Areas (TA): TA3 Space Power and Energy Storage, TA4 Robotics, TA8 Instruments, and TA12 Materials, to confine the research to the most abundant data pool. This research report continues the development of technology estimating efforts completed during 2013-2014, and addresses the refinement of parameters selected and recommended for use in the estimating process, where the parameters developed are applicable to Cost Estimating Relationships (CERs) used in the parametric cost estimating analysis. This research addresses the architecture for administration of the Technology Cost and Scheduling Estimating tool, the parameters suggested for computer software adjunct to any technology area, and the identification of gaps in the Technology Estimating process.

Research investigations in oil shale, tar sand, coal research, advanced exploratory process technology, and advanced fuels research: Volume 1 -- Base program. Final report, October 1986--September 1993

Energy Technology Data Exchange (ETDEWEB)

Smith, V.E.

1994-05-01

Numerous studies have been conducted in five principal areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. In subsequent years, underground coal gasification was broadened to be coal research, under which several research activities were conducted that related to coal processing. The most significant change occurred in 1989 when the agreement was redefined as a Base Program and a Jointly Sponsored Research Program (JSRP). Investigations were conducted under the Base Program to determine the physical and chemical properties of materials suitable for conversion to liquid and gaseous fuels, to test and evaluate processes and innovative concepts for such conversions, to monitor and determine environmental impacts related to development of commercial-sized operations, and to evaluate methods for mitigation of potential environmental impacts. This report is divided into two volumes: Volume 1 consists of 28 summaries that describe the principal research efforts conducted under the Base Program in five topic areas. Volume 2 describes tasks performed within the JSRP. Research conducted under this agreement has resulted in technology transfer of a variety of energy-related research information. A listing of related publications and presentations is given at the end of each research topic summary. More specific and detailed information is provided in the topical reports referenced in the related publications listings.

Research and development of basic technologies for the next generation industries, 'bio-elements'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihtsu 'bio soshi'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed in order to establish basic technologies to realize new information processing incorporating high-order functions of living organisms, and bio-elements equipped with high-order functions. In the field of developing technical means to measure directly the information processing function of living organisms, detailed analysis has become possible for the first time on spatial operation of nerve activities by using two-dimensional beam measurement operation on the nerve activities. In the field of aiming at modeling, a system to realize functions effective in terms of engineering was structured by incorporating into the model the functions specific to nervous systems of visual sense and motion. In the field of element technologies, a large progress was seen in the basic technology and evaluation technology such as design and fabrication of molecules added with different functions in the LB membrane. Membranes having simple but different functions such as light beam and scent detection were manufactured, whereas a possibility of having them manifest functions as elements was verified. Furthermore, possibilities were discovered in manufacturing functional membranes by using self-organizing capability as a result of using basic properties possessed by polymers, and in realizing functions simulating plasticity of nerves. These achievements would lead to a belief that the targets of the first term research and development have been achieved nearly completely. (NEDO)

Research and development of basic technologies for next generation industries, 'composite materials'. Evaluation on final research and development (interim report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (saishu kenkyu kaihatsu hyoka 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

Development was made on a technology to evaluate quality of composite materials. Few data are available for environmental resistance of composite materials, whereas identification of environmental deterioration behavior and establishment of a environmental resistance evaluating technology are a significant issue in utilizing these materials as new materials for space, aeronautics, and marine applications in the future. The present research was taken up with objectives to elucidate deterioration behavior of composite materials exposed to special environment in the atmosphere and space and to establish methods for acceleration tests and environmental performance evaluation by using simulated environments equivalent to the natural environment exposure. The former period (fiscal 1982 through 1984) has investigated environmental conditions in the atmosphere and space, prepared standard test specimens, performed design on environmental devices simulating the environmental elements, as well as tests on deterioration due to environmental elements, and systematized the deterioration characteristics to establish composite test conditions. The latter period (fiscal 1985 through 1988) has developed the composite environment testing device based on the result achieved in the former period, elucidated the deterioration behavior under the composite environmental conditions, and performed evaluation tests on the developed composite materials (FRP). (NEDO)

Evaluating research for disruptive innovation in the space sector

Science.gov (United States)

Summerer, L.

2012-12-01

Many governmental space activities need to be planned with a time horizon that extends beyond the comfort zone of reliable technology development assessments and predictions. In an environment of accelerating technological change, a methodological approach to addressing non-core technology trends and potentially disruptive, game-changing developments not yet linked to the space sector is increasingly important to complement efforts in core technology R&D planning. Various models and organisational setups aimed at fulfilling this purpose are in existence. These include, with varying levels of relevance to space, the National Aeronautics and Space Administration (NASA) Institute for Advanced Concepts (NIAC, operational form 1998 to 2007 and recently re-established), the Defence Advanced Research Projects Agency of the US Department of Defence, the Massachusetts Institute of Technology (MIT) Medialab, the early versions of Starlab, the Lockheed Skunk Works and the European Space Agency's Advanced Concepts Team. Some of these organisations have been reviewed and assessed individually, though systematic comparison of their methods, approaches and results have not been published. This may be due in part to the relatively sparse scientific literature on organisational parameters for enabling disruptive innovation as well as to the lack of commonly agreed indicators for the evaluation of their performance. Furthermore, innovation support systems in the space sector are organised differently than in traditional, open competitive markets, which serve as the basis for most scholarly literature on the organisation of innovation. The present paper is intended to advance and stimulate discussion on the organisation of disruptive innovation mechanisms specifically for the space sector. It uses the examples of the NASA Institute for Advanced Concepts and the ESA Advanced Concepts Team, analyses their respective approaches and compares their results, leading to the proposal of

From translational research to open technology innovation systems.

Science.gov (United States)

Savory, Clive; Fortune, Joyce

2015-01-01

The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

Laboratory technology research - abstracts of FY 1997 projects

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. A distinguishing feature of the ER multi-program national laboratories is their ability to integrate broad areas of science and engineering in support of national research and development goals. The LTR program leverages this strength for the Nation`s benefit by fostering partnerships with US industry. The partners jointly bring technology research to a point where industry or the Department`s technology development programs can pursue final development and commercialization. Projects supported by the LTR program are conducted by the five ER multi-program laboratories. These projects explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials; intelligent processing/manufacturing research; and sustainable environments.

Low-rank coal study: national needs for resource development. Volume 3. Technology evaluation

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

Technologies applicable to the development and use of low-rank coals are analyzed in order to identify specific needs for research, development, and demonstration (RD and D). Major sections of the report address the following technologies: extraction; transportation; preparation, handling and storage; conventional combustion and environmental control technology; gasification; liquefaction; and pyrolysis. Each of these sections contains an introduction and summary of the key issues with regard to subbituminous coal and lignite; description of all relevant technology, both existing and under development; a description of related environmental control technology; an evaluation of the effects of low-rank coal properties on the technology; and summaries of current commercial status of the technology and/or current RD and D projects relevant to low-rank coals.

Energy Technology Division research summary - 1999.

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-31

The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization, or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book.

Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

International Nuclear Information System (INIS)

1994-09-01

The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections

Teaching and research opportunities in technology entrepreneurship

OpenAIRE

Mosey, Simon

2016-01-01

Technology entrepreneurship as a discipline of study has come of age. The international research community is no longer debating what technology entrepreneurship means or spending time justifying its importance. We are rather engaged in building theory to encourage and enhance technology entrepreneurship in those organisations and institutions that wish to do so. In this paper, we define technology entrepreneurship as the interface between the more established academic fields of entrepreneurs...

Industrial science and technology frontier program progress reports for fiscal 1998. Research and development of synergy ceramics; 1998 nendo synergy ceramics no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In relation with research and development of 'synergy ceramics' which have begun since fiscal 1994 under a joint organization of the industries, Government and academic circles, reports were given on the achievement status of the whole of the first stage of the project, together with the results of researches made in fiscal 1998. With regard to high-order structure control technologies, reports were given on the following subjects: precursor design, structure formation design, nano-structure process and structuring reaction process as the basic technologies for structure creation, and inter-hierarchy deposition reaction control, phase boundary formation control, anisotropic particle interface control and high-order space production control as the structural element control technologies. With respect to analysis and evaluation technologies, reports were given on research achievements in fundamental technologies for analysis and evaluation, and property developing element evaluation technologies. In the field of overall survey and study, various committees and study meetings were held, research projects were planned, and technological trends were surveyed, whose results were reported. In the joint researches, reports were given on the survey and study on new material creation by means of high-order structure control, and the research on high-order structure control of ceramics by means of structuring reaction process control. (NEDO)

Industrial science and technology frontier program progress reports for fiscal 1998. Research and development of synergy ceramics; 1998 nendo synergy ceramics no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In relation with research and development of 'synergy ceramics' which have begun since fiscal 1994 under a joint organization of the industries, Government and academic circles, reports were given on the achievement status of the whole of the first stage of the project, together with the results of researches made in fiscal 1998. With regard to high-order structure control technologies, reports were given on the following subjects: precursor design, structure formation design, nano-structure process and structuring reaction process as the basic technologies for structure creation, and inter-hierarchy deposition reaction control, phase boundary formation control, anisotropic particle interface control and high-order space production control as the structural element control technologies. With respect to analysis and evaluation technologies, reports were given on research achievements in fundamental technologies for analysis and evaluation, and property developing element evaluation technologies. In the field of overall survey and study, various committees and study meetings were held, research projects were planned, and technological trends were surveyed, whose results were reported. In the joint researches, reports were given on the survey and study on new material creation by means of high-order structure control, and the research on high-order structure control of ceramics by means of structuring reaction process control. (NEDO)

Research and development of basic technologies for the next generation industries, 'ultra-grid elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'chokoshi soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to ultra-grid elements. With regard to the process technology to search materials suitable for the targets of ultra-grid elements and manufacture ultra-grid element structure, a technology has been completed, by which crystalline growth is performed while controlling AlAs and GaAs at atom layer levels by using the MBE process and MOCVD process. This has allowed the understanding to be progressed on behavior of electrons in hetero interface or very thin films. It has also become possible to acquire new crystals that have band gaps and grid constants matching the performance of the elements. Regarding ultra-grid functional elements, new functional elements with the HET and RHET structures were made by utilizing the characteristics of the ultra grids, and performances of normal temperature operation and high speed operation were investigated. The ultra-grid structured elements have made it possible to embed ultra fine electrode structure into crystals by means of double hetero growth, and a possibility of Si-based PBT was demonstrated. These achievements lead to a belief that the targets intended at the beginning of the present research have been achieved. (NEDO)

Assessment report of research and development activities in FY2014. Activity: 'Quantum beam science research' (In-advance evaluation)

International Nuclear Information System (INIS)

2015-09-01

Japan Atomic Energy Agency (hereafter referred to as 'JAEA') consulted an assessment committee, 'Evaluation Committee of Research Activities for Quantum Beam Science' (hereafter referred to as 'Committee') for result evaluation of 'Quantum Beam Science', in accordance with 'General Guideline for the Evaluation of Government Research and Development (R and D) Activities' by Cabinet Office, Government of Japan, 'Guideline for Evaluation of R and D in Ministry of Education, Culture, Sports, Science and Technology' and 'Regulation on Conduct for Evaluation of R and D Activities' by JAEA. In response to the JAEA's request, the Committee assessed the research program of the Quantum Beam Science Center (hereafter referred to as 'QuBS') during the period from April 2015 to March 2022. The Committee evaluated the management and research activities of QuBS based on the explanatory documents and oral presentations. (author)

Office of Industrial Technologies research in progress

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

Research on the Scientific and Technological Innovation of Research University and Its Strategic Measures

Science.gov (United States)

Cheng, Yongbo; Ge, Shaowei

2005-01-01

This paper illustrates the important role that the scientific and technological innovation plays in the research university. Technological innovation is one of the main functions that the research university serves and contributes for the development of economy and society, which is the essential measure for Research University to promote…

Oral History as Educational Technology Research

Science.gov (United States)

Butler, Rebecca P.

2008-01-01

Oral history is a significant type of historical research. Its use in retaining records of the early days of educational technology provides another way to look at the history of this field. The remembrances of its founders inform everyone today of, not only of what went on before, but also of how current and future technologies evolve. There are…

Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

Science.gov (United States)

Andrews, Taylor

The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

How a diverse research ecosystem has generated new rehabilitation technologies: Review of NIDILRR's Rehabilitation Engineering Research Centers.

Science.gov (United States)

Reinkensmeyer, David J; Blackstone, Sarah; Bodine, Cathy; Brabyn, John; Brienza, David; Caves, Kevin; DeRuyter, Frank; Durfee, Edmund; Fatone, Stefania; Fernie, Geoff; Gard, Steven; Karg, Patricia; Kuiken, Todd A; Harris, Gerald F; Jones, Mike; Li, Yue; Maisel, Jordana; McCue, Michael; Meade, Michelle A; Mitchell, Helena; Mitzner, Tracy L; Patton, James L; Requejo, Philip S; Rimmer, James H; Rogers, Wendy A; Zev Rymer, W; Sanford, Jon A; Schneider, Lawrence; Sliker, Levin; Sprigle, Stephen; Steinfeld, Aaron; Steinfeld, Edward; Vanderheiden, Gregg; Winstein, Carolee; Zhang, Li-Qun; Corfman, Thomas

2017-11-06

Over 50 million United States citizens (1 in 6 people in the US) have a developmental, acquired, or degenerative disability. The average US citizen can expect to live 20% of his or her life with a disability. Rehabilitation technologies play a major role in improving the quality of life for people with a disability, yet widespread and highly challenging needs remain. Within the US, a major effort aimed at the creation and evaluation of rehabilitation technology has been the Rehabilitation Engineering Research Centers (RERCs) sponsored by the National Institute on Disability, Independent Living, and Rehabilitation Research. As envisioned at their conception by a panel of the National Academy of Science in 1970, these centers were intended to take a "total approach to rehabilitation", combining medicine, engineering, and related science, to improve the quality of life of individuals with a disability. Here, we review the scope, achievements, and ongoing projects of an unbiased sample of 19 currently active or recently terminated RERCs. Specifically, for each center, we briefly explain the needs it targets, summarize key historical advances, identify emerging innovations, and consider future directions. Our assessment from this review is that the RERC program indeed involves a multidisciplinary approach, with 36 professional fields involved, although 70% of research and development staff are in engineering fields, 23% in clinical fields, and only 7% in basic science fields; significantly, 11% of the professional staff have a disability related to their research. We observe that the RERC program has substantially diversified the scope of its work since the 1970's, addressing more types of disabilities using more technologies, and, in particular, often now focusing on information technologies. RERC work also now often views users as integrated into an interdependent society through technologies that both people with and without disabilities co-use (such as the internet

Transferability of economic evaluations of medical technologies: a new technology for orthopedic surgery.

Science.gov (United States)

Steuten, Lotte; Vallejo-Torres, Laura; Young, Terry; Buxton, Martin

2008-05-01

Transferring results of economic evaluations across countries or jurisdictions can potentially save scarce evaluation resources while helping to make market access and reimbursement decisions in a timely fashion. This article points out why transferring results of economic evaluations is particularly important in the field of medical technologies. It then provides an overview of factors that are previously identified in the literature as affecting transferability of economic evaluations, as well as methods for transferring results in a scientifically sound way. As the current literature almost exclusively relates to transferability of pharmacoeconomic evaluations, this article highlights those factors and methodologies that are of particular relevance to transferring medical technology assessments. Considering the state-of-the-art literature and a worked, real life, example of transferring an economic evaluation of a product used in orthopedic surgery, we provide recommendations for future work in this important area of medical technology assessment.

Evaluative conditioning of food technologies in China

DEFF Research Database (Denmark)

Loebnitz, Natascha; Grunert, Klaus G

2014-01-01

This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

Integration of New Technology for Research in the Emergency Department: Feasibility of Deploying a Robotic Assessment Tool for Mild Traumatic Brain Injury Evaluation.

Science.gov (United States)

Subbian, Vignesh; Ratcliff, Jonathan J; Meunier, Jason M; Korfhagen, Joseph J; Beyette, Fred R; Shaw, George J

2015-01-01

The objective of this paper is to demonstrate the effective deployment of a robotic assessment tool for the evaluation of mild traumatic brain injury (mTBI) patients in a busy, resource-constrained, urban emergency department (ED). Functional integration of new robotic technology for research in the ED presented several obstacles that required a multidisciplinary approach, including participation from electrical and computer engineers, emergency medicine clinicians, and clinical operations staff of the hospital. Our team addressed many challenges in deployment of this advanced technology including: 1) adapting the investigational device for the unique clinical environment; 2) acquisition and maintenance of appropriate testing space for point-of-care assessment; and 3) dedicated technical support and upkeep of the device. Upon successful placement of the robotic device in the ED, the clinical study required screening of all patients presenting to the ED with complaints of head injury. Eligible patients were enrolled and tested using a robot-assisted test battery. Three weeks after the injury, patients were contacted to complete follow-up assessments. Adapting the existing technology to meet anticipated physical constraints of the ED was performed by engineering a mobile platform. Due to the large footprint of the device, it was frequently moved before ultimately being fully integrated into the ED. Over 14 months, 1423 patients were screened. Twenty-eight patients could not be enrolled because the device was unavailable due to operations limitations. Technical problems with the device resulted in failure to include 20 patients. A total of 66 mTBI patients were enrolled and 42 of them completed both robot-assisted testing and follow-up assessment. Successful completion of screening and enrollment demonstrated that the challenges associated with integration of investigational devices into the ED can be effectively addressed through a collaborative patient

Exploratory Technology Research Program for electrochemical energy storage

Science.gov (United States)

Kinoshita, Kim

1994-09-01

The U.S. Department of Energy's Office of Propulsion Systems provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EV's). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems (EVABS) Development Program and the Exploratory Technology Research (ETR) Program. The EVABS Program management responsibility has been assigned to Sandia National Laboratories (SNL); Lawrence Berkeley Laboratory (LBL) is responsible for management of the ETR Program. The EVABS and ETR Programs include an integrated matrix of R&D efforts designed to advance progress on selected candidate electrochemical systems. The United States Advanced Battery Consortium (USABC), a tripartite undertaking between DOE, the U.S. automobile manufacturers and the Electric Power Research Institute (EPRI), was formed in 1991 to accelerate the development of advanced batteries for consumer EV's. The role of the FIR Program is to perform supporting research on the advanced battery systems under development by the USABC and EVABS Program, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or the EVABS Program for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1993.

Integration of improved decontamination and characterization technologies in the decommissioning of the CP-5 research reactor

International Nuclear Information System (INIS)

Bhattacharyya, S. K.; Boing, L. E.

2000-01-01

The aging of research reactors worldwide has resulted in a heightened awareness in the international technical decommissioning community of the timeliness to review and address the needs of these research institutes in planning for and eventually performing the decommissioning of these facilities. By using the reactors already undergoing decommissioning as test beds for evaluating enhanced or new/innovative technologies for decommissioning, it is possible that new techniques could be made available for those future research reactor decommissioning projects. Potentially, the new technologies will result in: reduced radiation doses to the work force, larger safety margins in performing decommissioning and cost and schedule savings to the research institutes in performing the decommissioning of these facilities. Testing of these enhanced technologies for decontamination, dismantling, characterization, remote operations and worker protection are critical to furthering advancements in the technical specialty of decommissioning. Furthermore, regulatory acceptance and routine utilization for future research reactor decommissioning will be assured by testing and developing these technologies in realistically contaminated environments prior to use in the research reactors. The decommissioning of the CP-5 Research Reactor is currently in the final phase of dismantlement. In this paper the authors present results of work performed at Argonne National Laboratory (ANL) in the development, testing and deployment of innovative and/or enhanced technologies for the decommissioning of research reactors

Exploratory technology research program for electrochemical energy storage. Annual report for 1995

Energy Technology Data Exchange (ETDEWEB)

Kinoshita, Kim [ed.

1996-06-01

The US DOE Office of Transportation Technologies provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EV`s)and hybrid systems. The program centers on advanced electrochemical systems that offer the potential for high performance and low life- cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electric Vehicle Technology Program is divided into two project areas: the US Advanced Battery Consortium (USABC) and Advanced battery R&D which includes the Exploratory Technology Research (ETR) program managed by the Lawrence Berkeley National Laboratory. The role of the ETR program is to perform supporting research on the advanced battery systems under development by the USABC and the Sandia Laboratories (SNL) Electric Vehicle Advanced Battery Systems (EVABS) program, and to evaluate new systems with potentially superior performance, durability and/of cost characteristics. The specific goal of the ETR program is to identify the most promising electrochemical technologies and development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR program in CY 1995. This is a continuing program, and reports for prior years have been published; they are listed in this report.The general R&D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of fuel cell technology for transportation applications.

[Evaluation and prioritisation of the scientific research in Spain. Researchers' point of view].

Science.gov (United States)

María Martín-Moreno, José; Juan Toharia, José; Gutiérrez Fuentes, José Antonio

2008-12-01

The assessment and prioritisation of research activity are essential components of any Science, Technology and Industry System. Data on researchers' perspectives in this respect are scarce. The objective of this paper was to describe Spanish scientists' point of view on the current evaluation system in Spain and how they believe this system should be functionally structured. From the sampling frame formed by established Spanish scientists, listed in the databases of CSIC and FIS (Institute of Health Carlos III), clinical, biomedical-non clinical, and physics and chemical researchers were randomly selected. Two hundred and eleven interviews were carried out by means of a computer-assisted telephone interviewing system. Researchers expressed their acknowledgement of progress in the Spanish research field but made their wish clear to progress towards better scientific scenarios. In their assessment, they gave a score of 5.4 to scientific policy, as opposed to 9.4 when speaking about the goals, reflecting the desire for a better policy definition, with clear objectives, stable strategies and better coordination of R&D activities (the current coordination received a score of 3.9, while the desirable coordination was valued as high as 9.2). There was certain agreement regarding the need for a prioritisation criteria which preserves some degree of creativity by researchers. They also stated that they would like to see an independent research structure with social prestige and influence. The interviewed researchers believe that the evaluation of scientific activities is fundamental in formulating a sound scientific policy. Prioritisation should arise from appropriate evaluation. Strategies properly coordinated among all the stakeholders (including the private sector) should be fostered. Budget sufficiency, stability, and better organization of independent researchers should be the backbone of any strategy tailored to increase their capacity to influence future scientific

A research project to develop and evaluate a technical education component on materials technology for orientation to space-age technology

Science.gov (United States)

Jacobs, J. A.

1976-01-01

A project was initiated to develop, implement, and evaluate a prototype component for self-pacing, individualized instruction on basic materials science. Results of this project indicate that systematically developed, self-paced instruction provides an effective means for orienting nontraditional college students and secondary students, especially minorities, to both engineering technology and basic materials science. In addition, students using such a system gain greater chances for mastering subject matter than with conventional modes of instruction.

Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

Exploring health information technology education: an analysis of the research.

Science.gov (United States)

Virgona, Thomas

2012-01-01

This article is an analysis of the Health Information Technology Education published research. The purpose of this study was to examine selected literature using variables such as journal frequency, keyword analysis, universities associated with the research and geographic diversity. The analysis presented in this paper has identified intellectually significant studies that have contributed to the development and accumulation of intellectual wealth of Health Information Technology. The keyword analysis suggests that Health Information Technology research has evolved from establishing concepts and domains of health information systems, technology and management to contemporary issues such as education, outsourcing, web services and security. The research findings have implications for educators, researchers, journal.

Quality assurance for the research and development of nuclear technology

International Nuclear Information System (INIS)

Yang, Myung Seung; Kim, Young Sea; Lee, In Koo

1990-01-01

Quality evaluation was carried to analyze the current status of QA activities in the various projects and to devise a proper measures for the improvement of quality system. KAERI QA program evaluation was also performed in cooperation with foreign QA experts (Nutech International, USA) to study the best QA system for KAERI which is performing various nuclear project ranging from nuclear design, manufacturing to basic researches. The acquisition of N-certificate and stamp from ASME (American Society of Mechanical Engineers) was successfully accomplished for the quality system of power reactor system design. The basic study on the QA in R and D, computerization of quality evaluation system was also performed to upgrade the safety and reliability of nuclear projects by the utilization of these advanced quality technologies. (author)

Landmine research: technology solutions looking for problems

Science.gov (United States)

Trevelyan, James P.

2004-09-01

The global landmine problem came to the attention of researchers in the mid 1990's and by 1997 several advanced and expensive sensor research programs had started. Yet, by the end of 2003, there is little sign of a major advance in the technology available to humanitarian demining programs. Given the motivation and dedication of researchers, public goodwill to support such programs, and substantial research resources devoted to the problem, it is worth asking why these programs do not seem to have had an impact on demining costs or casualty rates. Perhaps there are factors that have been overlooked. This paper reviews several research programs to gain a deeper understanding of the problem. A possible explanation is that researchers have accepted mistaken ideas on the nature of the landmine problems that need to be solved. The paper provides several examples where the realities of minefield conditions are quite different to what researchers have been led to believe. Another explanation may lie in the political and economic realities that drive the worldwide effort to eliminate landmines. Most of the resources devoted to landmine clearance programs come from humanitarian aid budgets: landmine affected countries often contribute only a small proportion because they have different priorities based on realistic risk-based assessment of needs and political views of local people. Some aid projects have been driven by the need to find a market for demining technologies rather than by user needs. Finally, there is a common misperception that costs in less developed countries are intrinsically low, reflecting low rates paid for almost all classes of skilled labour. When actual productivity is taken into account, real costs can be higher than industrialized countries. The costs of implementing technological solutions (even using simple technologies) are often significantly under-estimated. Some political decisions may have discouraged thorough investigation of cost

A Framework for Research on Education With Technology

Directory of Open Access Journals (Sweden)

Daniel B. Wright

2018-04-01

Full Text Available Educational software offers the potential for greatly enhanced student learning. The current availability and political will for trying new approaches means that there is currently much interest in and expenditure on technology for education. After reviewing some of the relevant issues, a framework that builds upon Marr and Poggio's (1977 levels of explanation is presented. The research itself should draw upon existing cognitive, educational, and social research; much existing research is applicable. Guidelines for those conducting research and those wishing to acquire technology are presented.

Integrating information technologies as tools for surgical research.

Science.gov (United States)

Schell, Scott R

2005-10-01

Surgical research is dependent upon information technologies. Selection of the computer, operating system, and software tool that best support the surgical investigator's needs requires careful planning before research commences. This manuscript presents a brief tutorial on how surgical investigators can best select these information technologies, with comparisons and recommendations between existing systems, software, and solutions. Privacy concerns, based upon HIPAA and other regulations, now require careful proactive attention to avoid legal penalties, civil litigation, and financial loss. Security issues are included as part of the discussions related to selection and application of information technology. This material was derived from a segment of the Association for Academic Surgery's Fundamentals of Surgical Research course.

Soviet precision timekeeping research and technology

Energy Technology Data Exchange (ETDEWEB)

Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.

1991-08-01

This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs.

Soviet precision timekeeping research and technology

International Nuclear Information System (INIS)

Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.

1991-08-01

This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs

Application and research of special waste plasma disposal technology

International Nuclear Information System (INIS)

Lan Wei

2007-12-01

The basic concept of plasma and the principle of waste hot plasma disposal technology are simply introduced. Several sides of application and research of solid waste plasma disposal technology are sumed up. Compared to the common technology, the advantages of waste hot plasma disposal technology manifest further. It becomes one of the most prospective and the most attended high tech disposal technology in particular kind of waste disposal field. The article also simply introduces some experiment results in Southwest Institute of Physics and some work on the side of importation, absorption, digestion, development of foreign plasma torch technology and researching new power sources for plasma torch. (authors)

Research on Technology and Physics Education

Science.gov (United States)

Bonham, Scott

2010-10-01

From Facebook to smart phones, technology is an integral part of our student's lives. For better or for worse, technology has become nearly inescapable in the classroom, enhancing instruction, distracting students, or simply complicating life. As good teachers we want to harness the power we have available to impact our students, but it is getting harder as the pace of technological change accelerates. How can we make good choices in which technologies to invest time and resources in to use effectively? Do some technologies make more of a difference in student learning? In this talk we will look at research studies looking at technology use in the physics classroom---both my work and that of others---and their impact on student learning. Examples will include computers in the laboratory, web-based homework, and different forms of electronic communication. From these examples, I will draw some general principles for effective educational technology and physics education. Technology is simply a tool; the key is how we use those tools to help our students develop their abilities and understanding.

Evaluation technology of clothing comfortableness; Ifuku tekigosei hyoka gijutsu

Energy Technology Data Exchange (ETDEWEB)

Niwaya, H.

1999-10-26

Modern apparel industries are required to supply many kinds of products corresponding to various needs of consumers. Among consumers' needs, comfortableness to wear such as size-fitness is primarily important. To facilitate apparel industries, it is expected to develop a new technology of pattern designing of comfortable garment and measuring garment pressure distribution. Our research is aimed at developing technology that uses computer simulation to predict and evaluate wear comfort, including size suitability, without the need to actually sew up a garment. First, we developed a basic system to predict wearing silhouette, garment pressure, and ease looseness of the garment. Using this system, we carried on the following study. The 3-dimensional distributions of the garment pressure and ease looseness were reversely mapped on the paper pattern in order to indicate the preferable modification. The system was extended for several poses, e.g. twist, bend. From various parameters, we examined the factors of garment pressure and ease looseness. In addition, we selected the parameters for the size-fit indicators and investigated size-fit evaluation indicators. (author)

Technology Games: Using Wittgenstein for Understanding and Evaluating Technology.

Science.gov (United States)

Coeckelbergh, Mark

2017-08-15

In the philosophy of technology after the empirical turn, little attention has been paid to language and its relation to technology. In this programmatic and explorative paper, it is proposed to use the later Wittgenstein, not only to pay more attention to language use in philosophy of technology, but also to rethink technology itself-at least technology in its aspect of tool, technology-in-use. This is done by outlining a working account of Wittgenstein's view of language (as articulated mainly in the Investigations) and by then applying that account to technology-turning around Wittgenstein's metaphor of the toolbox. Using Wittgenstein's concepts of language games and form of life and coining the term 'technology games', the paper proposes and argues for a use-oriented, holistic, transcendental, social, and historical approach to technology which is empirically but also normatively sensitive, and which takes into account implicit knowledge and know-how. It gives examples of interaction with social robots to support the relevance of this project for understanding and evaluating today's technologies, makes comparisons with authors in philosophy of technology such as Winner and Ihde, and sketches the contours of a phenomenology and hermeneutics of technology use that may help us to understand but also to gain a more critical relation to specific uses of concrete technologies in everyday contexts. Ultimately, given the holism argued for, it also promises a more critical relation to the games and forms of life technologies are embedded in-to the ways we do things.

Research Needs for Technology Education: An International Perspective

Science.gov (United States)

Ritz, John M.; Martin, Gene

2013-01-01

These authors report the findings of a study that sought to determine the most relevant research issues needed to be studied by the technology education profession. It used an international panel of experts to develop a list of important research issues for the school subject of technology education and for the preparation of teachers to better…

Energy technology evaluation report: Energy security

Science.gov (United States)

Koopman, R.; Lamont, A.; Schock, R.

1992-09-01

Energy security was identified in the National Energy Strategy (NES) as a major issue for the Department of Energy (DOE). As part of a process designed by the DOE to identify technologies important to implementing the NES, an expert working group was convened to consider which technologies can best contribute to reducing the nation's economic vulnerability to future disruptions of world oil supplies, the working definition of energy security. Other working groups were established to deal with economic growth, environmental quality, and technical foundations. Energy Security working group members were chosen to represent as broad a spectrum of energy supply and end-use technologies as possible and were selected for their established reputations as experienced experts with an ability to be objective. The time available for this evaluation was very short. The group evaluated technologies using criteria taken from the NES which can be summarized for energy security as follows: diversifying sources of world oil supply so as to decrease the increasing monopoly status of the Persian Gulf region; reducing the importance of oil use in the US economy to diminish the impact of future disruptions in oil supply; and increasing the preparedness of the US to deal with oil supply disruptions by having alternatives available at a known price. The result of the first phase of the evaluation process was the identification of technology groups determined to be clearly important for reducing US vulnerability to oil supply disruptions. The important technologies were mostly within the high leverage areas of oil and gas supply and transportation demand but also included hydrogen utilization, biomass, diversion resistant nuclear power, and substitute industrial feedstocks.

Linking theory to practice in learning technology research

Directory of Open Access Journals (Sweden)

Cathy Gunn

2012-03-01

Full Text Available We present a case to reposition theory so that it plays a pivotal role in learning technology research and helps to build an ecology of learning. To support the case, we present a critique of current practice based on a review of articles published in two leading international journals from 2005 to 2010. Our study reveals that theory features only incidentally or not at all in many cases. We propose theory development as a unifying theme for learning technology research study design and reporting. The use of learning design as a strategy to develop and test theories in practice is integral to our argument. We conclude by supporting other researchers who recommend educational design research as a theory focused methodology to move the field forward in productive and consistent ways. The challenge of changing common practice will be involved. However, the potential to raise the profile of learning technology research and improve educational outcomes justifies the effort required.

Clean Technology Evaluation & Workforce Development Program

Energy Technology Data Exchange (ETDEWEB)

Patricia Glaza

2012-12-01

The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

CONCERNING CORRELATION BETWEEN METHODOLOGY AND TECHNOLOGY IN PEDAGOGICAL RESEARCH

Directory of Open Access Journals (Sweden)

Vladimir I. Zagvyazinsky

2015-01-01

Full Text Available The purpose of the paper is the continuation of a cycle of the methodological articles, called to help work of young researchers.The general dissatisfaction with quality and results of research work in an education sphere and pedagogics has been largely caused not only insufficient level of methodological culture of competitors of scientific degrees and researchers-experts, but also their inability to choose a work technology of procedure of research that will be adequate to the purposes, problems and a plan of it. The present article is also devoted to this problem.Methods. The methods of the analysis, synthesis, idealisation, generalisation of author’s experience, a concrete definition and modelling are used.Results and scientific novelty. The general technology of scientific search in an education sphere is presented; the technology is developed on the basis of long-term experience of the Tyumen scientific and pedagogical school, and justified in practice. The author doesn’t take into consideration the rigid technology of algorithmic type which is hardly useful in works of creative character; but in the present case – frame technology that defines the expedient organisation, sequence of stages of work and its corresponding maintenance. The following technology components are described: self-determination of the researcher or research group on the basis of creation and the statement of the developed project of all procedures of search; statement of questions on initial allocation of the problem conducting ideas, a plan-way of its realisation; project performance, its ascertaining and a reformative part, research procedures (the basic stage; summarising, generalisation of the research performed, a writing of the text of report documents, preparation of total publications. Examples of typical errors of the young scientists who do not own the technology of scientific activity are given.Practical significance. Proposed recommendations stated

ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES TASK 4, BIOMASS GASIFICATION-BASED PROCESSING

Energy Technology Data Exchange (ETDEWEB)

Martha L. Rollins; Les Reardon; David Nichols; Patrick Lee; Millicent Moore; Mike Crim; Robert Luttrell; Evan Hughes

2002-06-01

Biomass derived energy currently accounts for about 3 quads of total primary energy use in the United States. Of this amount, about 0.8 quads are used for power generation. Several biomass energy production technologies exist today which contribute to this energy mix. Biomass combustion technologies have been the dominant source of biomass energy production, both historically and during the past two decades of expansion of modern biomass energy in the U. S. and Europe. As a research and development activity, biomass gasification has usually been the major emphasis as a method of more efficiently utilizing the energy potential of biomass, particularly wood. Numerous biomass gasification technologies exist today in various stages of development. Some are simple systems, while others employ a high degree of integration for maximum energy utilization. The purpose of this study is to conduct a technical and economic comparison of up to three biomass gasification technologies, including the carbon dioxide emissions reduction potential of each. To accomplish this, a literature search was first conducted to determine which technologies were most promising based on a specific set of criteria. The technical and economic performances of the selected processes were evaluated using computer models and available literature. Using these results, the carbon sequestration potential of the three technologies was then evaluated. The results of these evaluations are given in this final report.

Contributions of mobile technologies to addiction research.

Science.gov (United States)

Swendsen, Joel

2016-06-01

Mobile technologies are revolutionizing the field of mental health, and particular progress has been made in their application to addiction research and treatment. The use of smartphones and other mobile devices has been shown to be feasible with individuals addicted to any of a wide range of substances, with few biases being observed concerning the repeated monitoring of daily life experiences, craving, or substance use. From a methodological point of view, the use of mobile technologies overcomes longstanding limitations of traditional clinical research protocols, including the more accurate assessment of temporal relationships among variables, as well as the reduction in both contextual constraints and discipline-specific methodological isolation. The present article presents a conceptual review of these advances while using illustrations of research applications that are capable of overcoming specific methodological barriers. Finally, a brief review of both the benefits and risks of mobile technology use for the treatment of patients will be addressed.

Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

Energy Technology Data Exchange (ETDEWEB)

Honma, George [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-10-01

The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will be used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).

Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

International Nuclear Information System (INIS)

Honma, George

2015-01-01

The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will be used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).

Midwifery education and technology enhanced learning: Evaluating online story telling in preregistration midwifery education.

Science.gov (United States)

Scamell, Mandie; Hanley, Thomas

2018-03-01

A major issue regarding the implementation of blended learning for preregistration health programmes is the analysis of students' perceptions and attitudes towards their learning. It is the extent of the embedding of Technology Enhanced Learning (TEL) into the higher education curriculum that makes this analysis so vital. This paper reports on the quantitative results of a UK based study that was set up to respond to the apparent disconnect between technology enhanced education provision and reliable student evaluation of this mode of learning. Employing a mixed methods research design, the research described here was carried to develop a reliable and valid evaluation tool to measure acceptability of and satisfaction with a blended learning approach, specifically designed for a preregistration midwifery module offered at level 4. Feasibility testing of 46 completed blended learning evaluation questionnaires - Student Midwife Evaluation of Online Learning Effectiveness (SMEOLE) - using descriptive statistics, reliability and internal consistency tests. Standard deviations and mean scores all followed predicted pattern. Results from the reliability and internal consistency testing confirm the feasibility of SMEOLE as an effective tool for measuring student satisfaction with a blended learning approach to preregistration learning. The analysis presented in this paper suggests that we have been successful in our aim to produce an evaluation tool capable of assessing the quality of technology enhanced, University level learning in Midwifery. This work can provide future benchmarking against which midwifery, and other health, blended learning curriculum planning could be structured and evaluated. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dosimetry and irradiation methods for the ANSTO gamma technology research irradiator (GATRI)

International Nuclear Information System (INIS)

Izard, M.E.

1988-07-01

The Australian Nuclear Science and Technology Organisation's gamma technology research irradiator (GATRI) at Lucas Heights, New South Wales, has been modified for use as a research and small-scale commercial irradiation facility to be available to government agencies and private industry for the technical and economic evaluation of irradiation processing. The new source rack was designed around existing mechanical components to optimise the limited space available within the irradiation cell. Irradiation parameters investigated during commissioning included the effect of source-to-target distance on relative dose rates within targets of the same density; effect of density on dose-rate distribution within targets irradiated at the same distance from the source; and the contribution of transit dose to low absorbed doses as the source is raised and lowered. The efficiency of the irradiator was determined for various target densities and overdose ratios

Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

Science.gov (United States)

Björkholm, Eva

2014-01-01

Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

Educational Technology Research Journals: "Australasian Journal of Educational Technology," 2003-2012

Science.gov (United States)

Hadlock, Camey Andersen; Clegg, J. Aleta; Hickman, Garrett R.; Huyett, Sabrina Lynn; Jensen, Hyrum C.; West, Richard E.

2014-01-01

The authors analyzed all research articles in the "Australasian Journal of Educational Technology" from 2003 to 2012 to determine the types of research methodologies published, major contributing authors, and most frequently referenced keywords, abstract terms, and cited articles. During this decade, the majority of articles published…

Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

Science.gov (United States)

Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright �

Oklahoma State University proposed Advanced Technology Research Center. Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The Department of Energy (DOE) has prepared an Environmental Assessment (EA) evaluating the construction and equipping of the proposed Advanced Technology Research Center (ATRC) at Oklahoma State University (OSU) in Stillwater, Oklahoma. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement is not required.

Learning Practice and Technology: Extending the Structurational Practice Lens to Educational Technology Research

Science.gov (United States)

Halperin, Ruth

2017-01-01

Scholars in the field of educational technology have been calling for robust use of social theory within learning technology research. In view of that, interest has been noted in applying Giddens' structuration theory to the understanding of human interaction with technology in learning settings. However, only few such attempts have been published…

Establishment of database and network for research of stream generator and state of the art technology review

Energy Technology Data Exchange (ETDEWEB)

Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun [Sungkyunkwan Univ., Seoul (Korea, Republic of)

2004-02-15

A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology.

Establishment of database and network for research of stream generator and state of the art technology review

International Nuclear Information System (INIS)

Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun

2004-02-01

A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology

A Study on the Planning of Technology Development and Research for Generation IV Nuclear Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

2005-08-15

This study aimed at the planning the domestic technology development of the Gen IV and the formulating the international collaborative project contents and executive plan for 'A Validity Assessment and Policies of the R and D of Generation IV Nuclear Energy Systems'. The results of the study include follows; - Survey of the technology state in the fields of the Gen IV system specific technologies and the common technologies, and the plans of the international collaborative research - Drawing up the executive research and development plan by the experts of the relevant technology field for the systems which Korean will participate in. - Formulating the effective conduction plan of the program reflecting the view of the experts from the industry, the university and the research institute. - Establishing the plan for estimation of the research fund and the manpower for the efficient utilization of the domestic available resources. This study can be useful material for evaluating the appropriateness of the Korea's participation in the international collaborative development of the Gen IV, and can be valuably utilized to establish the strategy for the effective conduction of the program. The executive plan of the research and development which was produced in this study will be used to the basic materials for the establishing the guiding direction and the strategic conduction of the program when the research and development is launched in the future.

Research needs of the new accelerator technologies

International Nuclear Information System (INIS)

Sessler, A.M.

1982-08-01

A review is given of some of the new accelerator technologies with a special eye to the requirements which they generate for research and development. Some remarks are made concerning the organizational needs of accelerator research

Using Technology to Evaluate a Web-Based Clinical Social Work Research Course

Directory of Open Access Journals (Sweden)

Zvi Gellis

2004-05-01

Full Text Available This article reports on a clinical research methods course taught online to a total of 90 off-campus MSW students in the fall of 1999, 2000, and 2001. The course was taught in a mid-size public university in a CSWE-accredited School of Social Work. The purpose of the course was to teach single subject design research skills for the evaluation of clinical social work practice. The student experience of the online course was assessed using qualitative interviews that add a deeper, textured understanding of the various facets of online instruction from the learner's perspective. Important dimensions for social work instruction in online courseware were delineated. A collaborative learning and teaching framework is presented for those social work educators interested in implementing web-based courses.

Clean coal technologies---An international seminar: Seminar evaluation and identification of potential CCT markets

International Nuclear Information System (INIS)

Guziel, K.A.; Poch, L.A.; Gillette, J.L.; Buehring, W.A.

1991-07-01

The need for environmentally responsible electricity generation is a worldwide concern. Because coal is available throughout the world at a reasonable cost, current research is focusing on technologies that use coal with minimal environmental effects. The United States government is supporting research on clean coal technologies (CCTs) to be used for new capacity additions and for retrofits to existing capacity. To promote the worldwide adoption of US CCTs, the US Department of Energy, the US Agency for International Development, and the US Trade and Development Program sponsored a two-week seminar titled Clean Coal Technologies -- An International Seminar. Nineteen participants from seven countries were invited to this seminar, which was held at Argonne National Laboratory in June 1991. During the seminar, 11 US CCT vendors made presentations on their state-of-the-art and commercially available technologies. The presentations included technical, environmental, operational, and economic characteristics of CCTs. Information on financing and evaluating CCTs also was presented, and participants visited two CCT operating sites. The closing evaluation indicated that the seminar was a worthwhile experience for all participants and that it should be repeated. The participants said CCT could play a role in their existing and future electric capacity, but they agreed that more CCT demonstration projects were needed to confirm the reliability and performance of the technologies

HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

Health effects of coal technologies: research needs

Energy Technology Data Exchange (ETDEWEB)

1980-09-01

In this 1977 Environmental Message, President Carter directed the establishment of a joint program to identify the health and environmental problems associated with advanced energy technologies and to review the adequacy of present research programs. In response to the President's directive, representatives of three agencies formed the Federal Interagency Committee on the Health and Environmental Effects of Energy Technologies. This report was prepared by the Health Effects Working Group on Coal Technologies for the Committee. In this report, the major health-related problems associated with conventional coal mining, storage, transportation, and combustion, and with chemical coal cleaning, in situ gasification, fluidized bed combustion, magnetohydrodynamic combustion, cocombustion of coal-oil mixtures, and cocombustion of coal with municipal solid waste are identified. The report also contains recommended research required to address the identified problems.

Research and development of basic technologies for the next generation industries, 'three-dimensional circuit elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'sanjigen kairo soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to three-dimensional circuit elements that integrate functions at ultra-high density. For the basic technology of lamination, the SOI technology suitable for the three-dimensional circuit elements was developed, and it has become possible to manufacture high-quality multi-layered crystalline structure by means of annealing that uses laser and electron beam. In addition, a lateral epitaxial technology for solid phase was developed, and the base to be applied to the three-dimensional circuit elements was established. Furthermore, the technology to put thin film circuits together would be useful for high-density integration in the future. The three-dimensional circuit makes parallel processing in each segment possible, whereas a possibility was shown that the processing can be performed at much higher speed than before. Actually a prototype three-dimensional circuit equipped with functions for parallel processing and judgment processing was fabricated. The image pre-processing which has been impossible on the real time basis in the conventional two-dimensional integrated circuit was realized in a speed as fast as milli-second order. These achievements lead to a belief that the targets for the present research and development have been achieved. (NEDO)

Evaluation of the Danish Energy Technology Development and Demonstration Programme EDDP 2007-2010; Evaluering af Energiteknologisk Udviklings- og Demonstrationsprogram EUDP 2007-2010

Energy Technology Data Exchange (ETDEWEB)

2011-07-01

As one of the largest recipients of energy research and development funds in Denmark, EDDP (Energy Technology Development and Demonstration Programme) is a central granting programme. The programme allocates funds to interesting and promising energy technologies that are either under development or ready to be tested in real life - also called demonstration. The 'Act on Energy Technology Development and Demonstration programme' shows that EDDP projects must contribute to meeting the energy and climate policy objectives for security of supplies, respect for the global climate and a cleaner environment and cost efficiency. These three objectives are related, which means that the projects supported in principle must contribute to several objectives. In addition, the programme shall support the further development of the Danish energy technological strategic strongholds, where prospects for Danish research and industry looks particularly favorable. With the desire to reveal which outputs EDDP actually generates, the EDDP's Board in January 2011 launched an evaluation of the EDDP's results and effects. The focus of the evaluation has particularly been to identify the programme's industrial effects and its contribution to reach the energy and climate policy objectives. The evaluation is thus an effect evaluation and not an actual programme evaluation. Participants from both completed and uncompleted projects participated in the evaluation. The evaluation reveals, therefore, both the results and effects that have already been achieved under the auspices of EDDP projects, and the results and effects which the various project participants expect to achieve in the longer term based on their project participation. In brief, the evaluation shows that: - EDDP projects are largely expected to contribute to Denmark's energy and climate policy objectives; - Satisfactory technological results are created in the projects; - Many projects also generate

Report of the evaluation by the ad hoc review committee on radiation application research. In-advance evaluation in fiscal year 2001

International Nuclear Information System (INIS)

2001-11-01

The Research Evaluation Committee, which consisted of 13 members from outside of the Japan Atomic Energy Research Institute (JAERI), set up an Ad Hoc Review Committee on Radiation Application Research in accordance with the Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations in order to evaluate the adequacy of the R and D programs to be implemented for five years starting in Fiscal Year 2002 at Department of Material Development, at Department of Ion-Beam-Applied Biology and at Advanced Radiation Technology Center in Takasaki Radiation Chemistry Research Establishment of JAERI. The Ad Hoc Review Committee consisted of ten specialists from outside of JAERI. The Ad Hoc Review Committee conducted its activities from May to July 2001. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Ad Hoc Review Committee meeting which was held on June 25, 2001, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Ad Hoc Review Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on July 12, 2001. This report describes the result of the evaluation by the Ad Hoc Review Committee on Radiation Application Research. (author)

Evaluating the effectiveness of personal response system technology on millennial student learning.

Science.gov (United States)

McCurry, Mary K; Hunter Revell, Susan M

2011-08-01

As nurse educators, we must explore new technologies that capitalize on the characteristics of millennial learners. One such technology, the personal response system (PRS), is an effective way to promote active learning and increase comprehension. Few nursing studies have examined the benefits of PRS technology on student outcomes. The purpose of this study was to evaluate the effectiveness of PRS technology on learning outcomes in two sections of an undergraduate nursing research course. A crossover design compared class quiz averages between and within groups. Findings related to between and within class quiz scores were mixed, whereas the effectiveness of in-class PRS questions on paper-and-pencil quiz scores and PRS-targeted quiz items was significant. Knowledge gained from this study can be used to enhance our ability to actively engage our technologically savvy undergraduate students. By threading technology into the undergraduate curriculum, learning outcomes may be improved. Copyright 2011, SLACK Incorporated.

Research and Technology Objectives and Plans Summary (RTOPS)

Science.gov (United States)

1993-01-01

This publication represents the NASA research and technology program for FY-93. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOP's is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

New Technologies, New Approaches to Evaluating Academic Productivity

Science.gov (United States)

Rich, Peter J.; West, Richard E.

2012-01-01

Technology has enabled a proliferation of publication venues for disseminating academic work. The task of evaluating the relative quality of each of these venues is simultaneously exacerbated and resolved by the use of new technologies. In this article, the authors propose a three-pronged framework for evaluating the quality of scholarly work that…

Science and Technology Research for Sustainable Development in ...

African Journals Online (AJOL)

FIRST LADY

A fundamental need for development of science, technology, research and national ... that encourages partnership for exchange of people, ideas, and support facilities. .... ii Imagination to apply existing technology to new problems or.

Health technology assessment. Evaluation of biomedical innovative technologies.

Science.gov (United States)

Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

2010-01-01

This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

Energy from Biomass Research and Technology Transfer Program

Energy Technology Data Exchange (ETDEWEB)

Schumacher, Dorin

2015-12-31

The purpose of CPBR is to foster and facilitate research that will lead to commercial applications. The goals of CPBR’s Energy from Biomass Research and Technology Transfer Program are to bring together industry, academe, and federal resources to conduct research in plant biotechnology and other bio-based technologies and to facilitate the commercialization of the research results to: (1) improve the utilization of plants as energy sources; (2) reduce the cost of renewable energy production; (3) facilitate the replacement of petroleum by plant-based materials; (4) create an energy supply that is safer in its effect on the environment, and (5) contribute to U.S. energy independence.

Fiscal 1999 leading research report. Research on 3-D cell tissue module technology; 1999 nendo sanjigen saibo soshiki module kogaku chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For forming cell tissues alternative to bio-tissues, this research targets the technology for forming bio-tissue modules by cultivating 3-D cell tissues from various kinds of cells. In fiscal 1999, research was made on various issues of element technologies necessary for forming module structure of bio-tissues, and study was also made on the application of 3-D cell tissue module engineering to industrial fields. Survey was made on element technologies and solutions supporting such engineering, and in addition, on progressive conditions of cell cultivation techniques, and concrete techniques for expressing cell functions. Research was made on a cell behavior under physicochemical stimulus environment to study the optimum environment for cell multiplication and function expression. Further research was made on state analysis of cells, in particular, fast precise measurement techniques of activation or malignant of cells and secretion of toxic substances by physical/optical analytical evaluation techniques such as photo-CT and spectroscopic analysis, and biochemical analysis techniques using bio-sensors. Study was also made on successful development and application cases of practical bio-artificial organs in western countries. (NEDO)

Interviewing Objects: Including Educational Technologies as Qualitative Research Participants

Science.gov (United States)

Adams, Catherine A.; Thompson, Terrie Lynn

2011-01-01

This article argues the importance of including significant technologies-in-use as key qualitative research participants when studying today's digitally enhanced learning environments. We gather a set of eight heuristics to assist qualitative researchers in "interviewing" technologies-in-use (or other relevant objects), drawing on concrete…

PROCEEDINGS OF THE 2002 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM.

Energy Technology Data Exchange (ETDEWEB)

MCDONALD,R.J.

2002-08-20

This is the PROCEEDINGS OF THE 2002 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM, which was Held at Oilheat Visions Conference, Rhode Island Convention Center, Providence, Rhode Island, August 20-21, 2002. The specific objectives of this conference are to: (1) identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and (2) foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

PROCEEDINGS OF THE 2002 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM

International Nuclear Information System (INIS)

MCDONALD, R.J.

2002-01-01

This is the PROCEEDINGS OF THE 2002 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM, which was Held at Oilheat Visions Conference, Rhode Island Convention Center, Providence, Rhode Island, August 20-21, 2002. The specific objectives of this conference are to: (1) identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and (2) foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation

Research and technology organisations and smart specialisation

OpenAIRE

Charles, David; Ciampi Stancova, Katerina

2015-01-01

Research and Technology Organisations (RTOs) have developed in many European countries at both national and regional levels to assist in the support of local industry, often around specific industrial technologies or sectors. With a core responsibility for technological upgrading they play a key role in regional and national innovation systems. Yet there is great variety in the form and mission of such RTOs, especially in terms of the degree of regional alignment, and whilst some regions are ...

Technology and Teacher-Student Interactions: A Review of Empirical Research

Science.gov (United States)

Harper, Ben

2018-01-01

As technology becomes ubiquitous in education, it is critical to understand the ways in which technology influences interactions between teachers and their students. The overarching research question that guided this systematic review was: What does research tell us about how technology influences interactions between teachers and students in K-12…

Computer science research and technology volume 3

CERN Document Server

Bauer, Janice P

2011-01-01

This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

Tools and methodologies for evaluation of energy chains and for technology perspective

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

of bio-fuel options (S. His / S. Rozakis); LCA/Evolution and potentialities (M. Sagisaka); The consumer valuation of energy technologies attributes (D. Bjornstad); Perspectives for evaluation of changing behaviour (J.L. Madre); Incentive systems and barriers to social acceptability (J.C. Hourcade); Internalization of external costs (A. Ricci); ETP/Energy technology perspectives project (D. Gielen); ETSAP/Technology dynamics in partial equilibrium energy models (G.C. Tosato); Endogenous technical change in long-term energy models (P. Criqui); Very long-term energy environment modelling (B. Chateau); Ultra long-term energy technology perspectives (M. Akai); The socio-economic toolbox of the EU Hydrogen Road-map (U. Buenger/H. Jeeninga); Combined approach using technology-oriented optimization and evaluation of impacts of individual policy measures (H.J. Ziesing); Application of a suite of basic research portfolio management tools (B. Valdez); Conclusions (R. Leban)

Tools and methodologies for evaluation of energy chains and for technology perspective

International Nuclear Information System (INIS)

2005-01-01

bio-fuel options (S. His / S. Rozakis); LCA/Evolution and potentialities (M. Sagisaka); The consumer valuation of energy technologies attributes (D. Bjornstad); Perspectives for evaluation of changing behaviour (J.L. Madre); Incentive systems and barriers to social acceptability (J.C. Hourcade); Internalization of external costs (A. Ricci); ETP/Energy technology perspectives project (D. Gielen); ETSAP/Technology dynamics in partial equilibrium energy models (G.C. Tosato); Endogenous technical change in long-term energy models (P. Criqui); Very long-term energy environment modelling (B. Chateau); Ultra long-term energy technology perspectives (M. Akai); The socio-economic toolbox of the EU Hydrogen Road-map (U. Buenger/H. Jeeninga); Combined approach using technology-oriented optimization and evaluation of impacts of individual policy measures (H.J. Ziesing); Application of a suite of basic research portfolio management tools (B. Valdez); Conclusions (R. Leban)

Evaluation of the Benefits Attributable to Automotive Lightweight Materials Program Research and Development Projects; TOPICAL

International Nuclear Information System (INIS)

Das, S

2001-01-01

The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R and D projects were chosen for this pilot evaluation: Low-Cost, Continuous Cast Aluminum Sheet; Advanced Forming Technologies for Aluminum; and Manufacturing of Composite Automotive Structures. These projects were chosen because they represent a range of benefits evaluation situations. The first project resulted in an improved process that may be commercialized. The second project is on going and has two distinct components. The third project has yielded an improved technology that has been commercialized. This completed project also benefited from numerous complementary projects

Technology Evaluation for Environmental Risk Mitigation Compendium

Science.gov (United States)

Meinhold, A.; Greene, B.; Dussich, J.; Sorkin, A.; Olsen, W.

2017-01-01

The Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center and its predecessor organization the Acquisition Pollution Prevention Program (AP2) supported the National Aeronautics and Space Administration (NASA) in identifying technology solutions to risks and costs to NASA programs driven by environmental regulations and requirements. TEERM researched the commercial and government marketplace to locate viable and available technologies that met NASAs needs. TEERM focused on addressing environmentally-driven risks of direct concern to NASA programs and facilities, including hazardous materials in NASA operations and materials that became obsolescent because of environmental regulations. TEERM projects aimed to reduce cost; ensure the health and safety of people, assets, and the environment; promote efficiency; and minimize duplication. Major TEERM and AP2 projects focused on waste minimization and hazardous waste treatment, recycling, corrosion prevention and control, solvent and ozone depleting substances substitution, and aqueous based cleaners. In 2017, NASA made the decision to terminate the TEERM Principal Center. This Compendium Report documents TEERM and AP2 project successes. The Compendium Report traces the evolution of TEERM based on evolving risks and requirements for NASA and its relationship to the Space Shuttle Program, the United States Department of Defense, the European Space Agency, and other public and private stakeholders. This Compendium Report also documents project details from Project Summaries and Joint Test Plans and describes project stakeholders and collaborative effort results.

Technologies for learning? An actor-network theory critique of ‘affordances' in research on mobile learning

Directory of Open Access Journals (Sweden)

Gale Parchoma

2011-12-01

Full Text Available How is the link between learner and technology made in mobile learning? Whatis the value of the concept of ‘affordances'? And how does research articulatingthis concept act to position mobile devices as ‘technologies for learning'? Thisliterature review used both unstructured and structured search samples of publishedresearch on mobile learning to critically evaluate the prevalence and influenceof the concept of the affordances of mobile technologies. Actor-networktheory is drawn on as a theoretical lens through which to critically considerhow this concept is articulated, and in particular to explore the way it positionsand controls mobile devices as technologies for learning. Parallels in contemporaryaccounts of mobile learning are drawn with classifications of previous discoursesaround the introduction of computers into schools. An alternativeagenda for mobile learning research is suggested with a focus on authentic andinformal contexts rather than controlled experiments.

1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

International Nuclear Information System (INIS)

Lewis, N.M.; Barkley, N.P.; Williams, T.

1992-01-01

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

Science and Technology Research for Sustainable Development in ...

African Journals Online (AJOL)

Science and Technology Research for Sustainable Development in Africa: The Imperative ... This has placed African countries at a disadvantage. ... In this paper, effort is made to establish the imperative of education to science and technology.

Decontamination Technology Development for Nuclear Research Facilities

International Nuclear Information System (INIS)

Oh, Won Zin; Jung, Chong Hun; Choi, Wang Kyu; Won, Hui Jun; Kim, Gye Nam

2004-02-01

Technology development of surface decontamination in the uranium conversion facility before decommissioning, technology development of component decontamination in the uranium conversion facility after decommissioning, uranium sludge treatment technology development, radioactive waste soil decontamination technology development at the aim of the temporary storage soil of KAERI, Optimum fixation methodology derivation on the soil and uranium waste, and safety assessment methodology development of self disposal of the soil and uranium waste after decontamination have been performed in this study. The unique decontamination technology applicable to the component of the nuclear facility at room temperature was developed. Low concentration chemical decontamination technology which is very powerful so as to decrease the radioactivity of specimen surface under the self disposal level was developed. The component decontamination technology applicable to the nuclear facility after decommissioning by neutral salt electro-polishing was also developed. The volume of the sludge waste could be decreased over 80% by the sludge waste separation method by water. The electrosorption method on selective removal of U(VI) to 1 ppm of unrestricted release level using the uranium-containing lagoon sludge waste was tested and identified. Soil decontamination process and equipment which can reduce the soil volume over 90% were developed. A pilot size of soil decontamination equipment which will be used to development of real scale soil decontamination equipment was designed, fabricated and demonstrated. Optimized fixation methodology on soil and uranium sludge was derived from tests and evaluation of the results. Safety scenario and safety evaluation model were development on soil and uranium sludge aiming at self disposal after decontamination

Using Citation Analysis Methods to Assess the Influence of Science, Technology, Engineering, and Mathematics Education Evaluations

Science.gov (United States)

Greenseid, Lija O.; Lawrenz, Frances

2011-01-01

This study explores the use of citation analysis methods to assess the influence of program evaluations conducted within the area of science, technology, engineering, and mathematics (STEM) education. Citation analysis is widely used within scientific research communities to measure the relative influence of scientific research enterprises and/or…

Overview of remote technologies applied to research reactor fuel

International Nuclear Information System (INIS)

Oerdoegh, M.; Takats, F.

1999-01-01

This paper gives a brief overview of the remote technologies applied to research reactor fuels. Due to many reasons, the remote technology utilization to research reactor fuel is not so widespread as it is for power reactor fuels, however, the advantages of the application of such techniques are obvious. (author)

REMEDIATION TECHNOLOGY EVALUATION AT THE GILT EDGE MINE, SOUTH DAKOTA

Science.gov (United States)

This document reports the findings of the Mine Waste Technology Program's Activity III, Project 29,The Remediation Technology Evaluation Project at the Gilt Edge Mine, S.D. This project consisted of evaluating three emerging acidic waste rock stabilization technologies and compar...

The 1975 schedule of deliberation of the Ministry of Research and Technology

International Nuclear Information System (INIS)

1975-01-01

This syllabus contains details about tasks and members of A. the advisory board on research and technology (BAFT) and the discussion forum concerned with analysing and forecasting the needs of research (DK) B. committees of experts - data processing and documentation - energy research and technology - the arts - humanizing working conditions - maritime research and technology - space research and technology C. 51 special panels and 66 specialist circles D. the Ministry's project committee. (orig./LN) [de

Diagnosing Management of Agricultural Research and Technology Development under the Agricultural Innovation Framework

Directory of Open Access Journals (Sweden)

2014-06-01

Full Text Available This study aimed at identifying and analyzing issues and challenges on the agricultural research and technology development under the national innovation framework. The survey consisted of two groups: agricultural researchers of Agriculture-Research and Education Organization and all faculty members of public agricultural faculties of Ministry of Scientific, Research and Technology. Using Cochran sampling formula and multi-stage sampling method, 188 researchers and 205 faculty members were selected in order to fill in the survey questionnaire. Using the SPSS, collected data analyzed based on explanatory factor analysis. Totally, factor analysis of three sets of issues and challenges on the agricultural research and technology development under the national innovation framework led to extract 13 factors, including agricultural structure and policy, infrastructure and resources of agricultural development, supportive services for agricultural development (level of agricultural development, investment and capacity building in research and technology, management of research and technology development, research and technology productivity, research culture, networks for research and technology development (level of national innovation system, agricultural research policy, impacts and effectiveness of agricultural research and technology development, integrated management of research and technology, institutional development for agricultural research and technology and systematic synergy of agricultural research and higher education (level of agricultural innovation system. Totally, these three sets of factors explained 64%, 75% and 73% of the total variances. Finally, using conceptual clustering for the extracted factors, a conceptual model of issues and challenges of agricultural research and technology development under the national innovation framework was presented.

Innovative and basic researches for high temperature technologies at HTTR

International Nuclear Information System (INIS)