An evaluation of an interprofessional master's level programme in children's palliative care. Part 1 the students' evaluation of the programme.

LENUS (Irish Health Repository)

Nicholl, Honor

2014-04-01

In 2010\\/12 an innovative children\\'s palliative care interprofessional educational project funded by the Irish Hospice Foundation was undertaken in a University faculty (Trinity College Dublin). This initiative responded to international educational recommendations to meet the palliative care needs of children. The project involved the development and delivery of 3 standalone modules at Master\\'s level and a substantive research evaluation of the project to examine stakeholders and students perspectives to provide an insight into their experiences and to gather data for future developments. The research evaluation was conducted in two parts, part one sought students\\' evaluation and part two sought stakeholders\\

Studies on assessment of health effects of radiation processed foods: Part 1. genetic toxicological evaluation in somatic and germ cells of laboratory animals

Energy Technology Data Exchange (ETDEWEB)

Chaubey, R C; Aravindakshan, M; Chauhan, P S [Genetic Toxicology and Chromosome Studies Section, Cell Biology Div., Bhabha Atomic Research Centre, Mumbai (India)

1999-09-01

The studies summarized in this report form a part of the program on the safety evaluation of radiation-processed foods, an important component of the development of radiation technology for food preservation from the public health point of view. These studies contributed significantly and critically to the acceptance of safety of radiation processed foods by regulatory agencies both at the national and international levels. This report contains only genetic studies, one aspect of this program, while the remaining studies will be summarized in a separate report.

Studies on assessment of health effects of radiation processed foods: Part 1. genetic toxicological evaluation in somatic and germ cells of laboratory animals

International Nuclear Information System (INIS)

Chaubey, R.C.; Aravindakshan, M.; Chauhan, P.S.

1999-09-01

The studies summarized in this report form a part of the program on the safety evaluation of radiation-processed foods, an important component of the development of radiation technology for food preservation from the public health point of view. These studies contributed significantly and critically to the acceptance of safety of radiation processed foods by regulatory agencies both at the national and international levels. This report contains only genetic studies, one aspect of this program, while the remaining studies will be summarized in a separate report

Evaluation and diagnosis of the hair loss patient: part II. Trichoscopic and laboratory evaluations.

Science.gov (United States)

Mubki, Thamer; Rudnicka, Lidia; Olszewska, Malgorzata; Shapiro, Jerry

2014-09-01

The use of trichoscopy for evaluating a number of hair and scalp disorders is gaining popularity. It is a simple and noninvasive in vivo tool for visualizing hair shafts and the scalp. Recently, alopecias have been classified according to their trichoscopic findings. The second part of this 2-part continuing medical education article reviews recent advances in this field and describes a systematic approach for using the differential diagnostic findings of trichoscopy in alopecia. Copyright © 2014 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

Cementless anatomical prosthesis for the treatment of 3-part and 4-part proximal humerus fractures: cadaver study and prospective clinical study with minimum 2 years followup

Directory of Open Access Journals (Sweden)

Obert Laurent

2016-01-01

Full Text Available Introduction: The purpose of this study was to evaluate the functional and radiological outcomes of a cementless, trauma-specific locked stem for 3- and 4-part proximal humeral fractures. Materials and methods: This study consisted of two parts: a cadaver study with 22 shoulders and a multicenter prospective clinical study of 23 fracture patients evaluated at least 2 years after treatment. In the cadaver study, the locked stem (HumelockTM, FX Solutions and its instrumentation were evaluated. In the clinical study, five senior surgeons at four different hospitals performed the surgical procedures. An independent surgeon evaluated the patients using clinical (Constant score, QuickDASH and radiological (X-rays, CT scans outcome measures. Results: The cadaver study allowed us to validate the height landmarks relative to the pectoralis major tendon. In the clinical study, at the review, abduction was 95° (60–160, forward flexion was 108° (70–160, external rotation (elbow at body was 34° (0–55, the QuickDASH was 31 (4.5–59, the overall Constant score was 54 (27–75, and the weighted Constant score was 76 (31.5–109. Discussion: This preliminary study of hemiarthroplasty (HA with a locked stem found results that were at least equivalent to published series. As all patients had at least a 2-year follow-up, integration of the locked stem did not cause any specific complications. These results suggest that it is possible to avoid using cement when hemiarthroplasty is performed for the humeral stem. This implant makes height adjustment and transosseous suturing of the tuberosities more reproducible.

Evaluation of ethanol extract of Artemisia maciverae aerial part for ...

African Journals Online (AJOL)

christy

Evaluation of ethanol extract of Artemisia maciverae aerial part for antiplasmodial activity ... median lethal dose of A. maciverae in mice was determined to be greater than ... medicinal uses [9]. ..... mode of action and mechanism of resistance.

Blade System Design Study. Part II, final project report (GEC).

Energy Technology Data Exchange (ETDEWEB)

Griffin, Dayton A. (DNV Global Energy Concepts Inc., Seattle, WA)

2009-05-01

As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its

A Virtual Learning Environment for Part-Time MASW Students: An Evaluation of the WebCT

Science.gov (United States)

Chan, Charles C.; Tsui, Ming-sum; Chan, Mandy Y. C.; Hong, Joe H.

2008-01-01

This study aims to evaluate the perception of a cohort of social workers studying for a part-time master's program in social work in using the popular Web-based learning platform--World Wide Web Course Tools (WebCT) as a complimentary method of teaching and learning. It was noted that social work profession began incorporating computer technology…

Manufacturability evaluation for molded parts using fictitious physical models, and its application in topology optimization

OpenAIRE

Sato, Yuki; Yamada, Takayuki; Izui, Kazuhiro; Nishiwaki, Shinji

2017-01-01

Manufacturing methods using molds, such as casting and injection molding, are widely used in industries. A basic requirement when using such manufacturing methods is that design engineers must design products so that they incorporate certain geometrical features that allow the mold parts to be removed from the created solid object. In the present study, we propose a manufacturability evaluation method especially adapted for the use of molds. To evaluate the manufacturability, we introduce fic...

Evaluation of natural gas supply options for Southeast and Central Europe: Part 2. Multi-criteria assessment

International Nuclear Information System (INIS)

Afgan, Naim H.; Carvalho, Maria G.; Pilavachi, Petros A.; Martins, Nelson

2008-01-01

Decision making methods are used as a tool for the selection of alternatives to be evaluated on the basis of several criteria. Evaluation of the potential routes for natural gas supply to the Southeast and Central European countries is studied using single and multi-criteria evaluation. The potential options included in this analysis are the: Yamal Route; Nabucco Route; West Balkan Route; LNG Neum Route; and Gas by Wire Route. In part 1, the paper was devoted to the definition of the indicators and to single indicator analysis. In part 2, the analysis is based on multi-criteria evaluation, which comprises the possibility to assess the options under predefined constraints amongst indicators. The paper also describes different methods used for multi-criteria evaluation. This analysis focuses on cases with different priorities defined among individual weighting coefficients with the others having the same value. It was shown that all options under specific constraints can be qualified as promising in the decision making process. It is also concluded that favourite indicator constraints may exaggerate some options

A slingram survey on the Nevada Test Site: part of an integrated geologic geophysical study of site evaluation for nuclear waste disposal

Science.gov (United States)

Flanigan, Vincent J.

1979-01-01

A slingram geophysical survey was made in early 1978 as part of the integrated geologlcal-geophysical study aimed at evaluating the Eleana Formation as a possible repository for nuclear waste. The slingram data were taken over an alluvial fan and pediments along the eastern flank of Syncline Ridge about 45 km north of Mercury, Nevada, on the Nevada Test Site. The data show that the more conductive argillaceous Eleana Formation varies in depth from 40 to 85 m from west to east along traverse lines. Northeast-trending linear anomalies suggest rather abrupt changes in subsurface geology that may be associated with faults and fractures. The results of the slingram survey will, when interpreted in the light of other geologic and geophysical evidence, assist in understanding the shallow parts of the geologic setting of the Eleana Formation.

Evaluation of the finger wrinkling test: A pilot study

NARCIS (Netherlands)

van Barneveld, S.; van der Palen, Jacobus Adrianus Maria; van Putten, Michel Johannes Antonius Maria

2010-01-01

Purpose: Tilt table testing mainly evaluates the systemic cardiovascular part of the autonomic nervous system, while it is assumed that the finger wrinkling test assesses the peripheral part of the autonomic nervous system. In this study we explored whether the finger wrinkling test could be a

The Method of Validity Evaluation of Hard Coal Excavation in Residual Seam Parts

Science.gov (United States)

Wodarski, Krzysztof; Bijańska, Jolanta; Gumiński, Adam

2017-12-01

The excavation of residual seam parts should be justified by positive assessment of the purposefulness, technical feasibility and economic effectiveness. The results of the profitability evaluation are crucial in a decision making process. The excavation of residual seam parts, even if it is possible from a technical point of view, should not be implemented if it is economically inefficient or when accompanied by a very high risk of non-recovery of invested capital resources. The article presents the evaluation method of possibilities of excavating hard coal from residual seam parts, and the example of its use in one of collieries in the Upper Silesian Coal Basin. Working in line with the developed method, allows to indicate the variant of residual seam part exploitation, which is feasible to implement from a technical point of view, and which is characterized by the highest economic effectiveness and lowest risk.

32 CFR Appendix G to Part 505 - Management Control Evaluation Checklist

Science.gov (United States)

2010-07-01

... CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. G Appendix G to Part 505—Management Control Evaluation Checklist (a) Function. The function covered by this checklist is DA Privacy...

Integrating CHWs as part of the team leading diabetes group visits: A randomized controlled feasibility study

Science.gov (United States)

The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n=5...

PIO I-II tendencies case study. Part 1. Mathematical modeling

Directory of Open Access Journals (Sweden)

Adrian TOADER

2010-03-01

Full Text Available In the paper, a study is performed from the perspective of giving a method to reduce the conservatism of the well known PIO (Pilot-Induced Oscillation criteria in predicting the susceptibility of an aircraft to this very harmful phenomenon. There are three interacting components of a PIO – the pilot, the vehicle, and the trigger (in fact, the hazard. The study, conceived in two parts, aims to underline the importance of human pilot model involved in analysis. In this first part, it is shown, following classical sources, how the LQG theory of control and estimation is used to obtain a complex model of human pilot. The approach is based on the argument, experimentally proved, that the human behaves “optimally” in some sense, subject to his inherent psychophysical limitations. The validation of such model is accomplished based on the experimental model of a VTOL-type aircraft. Then, the procedure of inserting typical saturation nonlinearities in the open loop transfer function is presented. A second part of the paper will illustrate PIO tendencies evaluation by means of a grapho-analytic method.

Dietary Supplements and Health Aids - A Critical Evaluation Part 2 - Macronutrients and Fiber.

Science.gov (United States)

Dubick, Michael A.

1983-01-01

Part 1 of this evaluation of dietary supplements and health aids (SE 533 788) focused on various therapeutic claims made for vitamins and minerals. This part examines health-promoting claims made for selected macronutrients and fiber. Macronutrients examined include selected proteins, amino acids, enzymes, carbohydrates, and lipids. (JN)

Impact of late-to-refill reminder calls on medication adherence in the Medicare Part D population: evaluation of a randomized controlled study

Directory of Open Access Journals (Sweden)

Taitel MS

2017-02-01

Full Text Available Michael S Taitel, Ying Mu, Angshuman Gooptu, Youbei Lou Health Analytics, Research & Reporting, Walgreen Co., Deerfield, IL, USA Objectives: This study evaluates a nationwide pharmacy chain’s late-to-refill (LTR reminder program that entails local pharmacists placing reminder calls to Medicare Part D patients. Methods: We conducted a randomized controlled study among 735,218 patients who exhibited nonadherent behavior by not refilling a maintenance medication 3 days from an expected refill date. Patients were randomly assigned to an intervention group who received LTR reminder calls or to a control group. We used Walgreens pharmaceutical claims data from 2015 to estimate the impact of LTR calls on short-term and annual adherence. Results: The initial refill rate within the first 14 days of the expected refill date significantly increased in the intervention group by 22.8% (6.09 percentage points compared to the control group (P<0.001. The proportion of days covered (PDC in the intervention group increased significantly by 1.5% (0.856 percentage points relative to the control group (P<0.001 over 365 days. Patients in the intervention group were significantly more adherent (PDC ≥80% by 3% (0.97 percentage points compared to the control group (P<0.001. Over a 270-day follow-up period, persistence significantly increased by 2.15 days in the intervention group (P<0.001. Conclusion: Results from this study suggest that LTR reminder calls increased adherence for Medicare Part D patients who are late in refilling their medications and therefore have the potential to reduce their risk for hospitalization and health care costs. Additionally, the intervention increased the number of patients with PDC ≥80% by ~3%, positively impacting Medicare Part D plan quality rating. Keywords: reminder system, tailored intervention, Medicare Part D, adherence, persistence

Evaluation of 5-year-old children with complete cleft lip and palate: Multicenter study. Part 1: Lip and nose aesthetic results.

Science.gov (United States)

Dissaux, Caroline; Bodin, Frédéric; Grollemund, Bruno; Picard, Arnaud; Vazquez, Marie-Paule; Morand, Béatrice; James, Isabelle; Kauffmann, Isabelle; Bruant-Rodier, Catherine

2015-12-01

Cleft surgery is marked by all the controversies and the multiplication of protocols, as it has been shown by the Eurocleft study. The objective of this pilot study is to start a comparison and analyzing procedure between primary surgical protocols in French centers. Four French centers with different primary surgical protocols for cleft lip and palate repair, have accepted to be involved in this retrospective study. In each center, 20 consecutive patients with complete cleft lip and palate (10 UCLP and 10 BCLP per center), non syndromic, have been evaluated at a mean age of 5 [4,6]. In this first part, the aesthetic results of nose and lip repair were assessed based on the scale established by Mortier et al. (1997). Considering nose outcome, primary cleft repair surgery including a nasal dissection gives a statistically significant benefit in terms of septum deviation. Considering lip result, muscular dehiscence rate is significantly higher in BCLP patients with a two-stage lip closure. The centers using Millard one-stage lip closure do not have uniform results. For UCLP patients, the quality of scar is not statistically different between Skoog and Millard techniques. Primary results based on a simple, reproducible evaluation protocol. Extension to other centers required. Therapeutic study. Level III/retrospective multicenter comparative study. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Textbook Evaluation: An Analysis of Listening Comprehension Parts in Top Notch 2A & 2B

Science.gov (United States)

Soori, Afshin; Haghani, Elham

2015-01-01

Textbooks are the instruments that assist both teachers and learners in process of second language learning. With respect to the importance of textbooks in a language course, evaluation of course books is a significant issue for most researchers. The present study investigated and analyzed Listening Comprehension parts in Top Notch 2A & 2B 2nd…

Evaluation of CNS activities of aerial parts of Cynodon dactylon Pers. in mice.

Science.gov (United States)

Pal, Dilipkumar

2008-01-01

The dried extracts of aerial parts of Cynodon dactylon Pers. (Graminae) were evaluated for CNS activities in mice. The ethanol extract of aerial parts of C. dactylon (EECD) was found to cause significant depression in general behavioral profiles in mice. EECD significantly potentiated the sleeping time in mice induced by standard hypnotics viz. pentobarbitone sodium, diazepam, and meprobamate in a dose dependant manner. EECD showed significant analgesic properties as evidenced by the significant reduction in the number of writhes and stretches induced in mice by 1.2% acetic acid solution. It also potentiated analgesia induced by morphine and pethidine in mice. EECD inhibited the onset and the incidence of convulsion in a dose dependent manner against pentylenetetrazole (PTZ)-induced convulsion. The present study indicates that EECD has significant CNS depressant activities.

Matrix comparison, Part 2

DEFF Research Database (Denmark)

Schneider, Jesper Wiborg; Borlund, Pia

2007-01-01

The present two-part article introduces matrix comparison as a formal means for evaluation purposes in informetric studies such as cocitation analysis. In the first part, the motivation behind introducing matrix comparison to informetric studies, as well as two important issues influencing such c...

Evaluation Of The Two Model Biocorridors In Soth-West Part Of Slovakia In Agricultural Landscape

Directory of Open Access Journals (Sweden)

Petra Debnáriková

2016-12-01

Full Text Available The aim of the research is to evaluate two different models of biocorridors in south-west part of Slovakia in intensively utilized agricultural landscape. The first biocorridor is a part of fragmented alluvial softwood forest along the Žitava’s river in its unregulated part in cadastral territory Horný Ohaj, district Vráble. This biocorridor should be the representative biocorridor by its structure and plant composition in its area. The second biocorridor is biocorridor composed by Robinia pseudoacacia L. in the village Báb, district Nitra. The research analyzes the structure of the selected biocorridors by using the methods of phytocoenology, evaluate functional integrity by monitoring of their spatial parameters in terrain and by processing maps in the AutoCAD program. At the base of phytocoenological report evaluates occurence of alien species.

Physical evaluations of Co-Cr-Mo parts processed using different additive manufacturing techniques

Science.gov (United States)

Ghani, Saiful Anwar Che; Mohamed, Siti Rohaida; Harun, Wan Sharuzi Wan; Noar, Nor Aida Zuraimi Md

2017-12-01

In recent years, additive manufacturing with highly design customization has gained an important technique for fabrication in aerospace and medical fields. Despite the ability of the process to produce complex components with highly controlled architecture geometrical features, maintaining the part's accuracy, ability to fabricate fully functional high density components and inferior surfaces quality are the major obstacles in producing final parts using additive manufacturing for any selected application. This study aims to evaluate the physical properties of cobalt chrome molybdenum (Co-Cr-Mo) alloys parts fabricated by different additive manufacturing techniques. The full dense Co-Cr-Mo parts were produced by Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) with default process parameters. The density and relative density of samples were calculated using Archimedes' principle while the surface roughness on the top and side surface was measured using surface profiler. The roughness average (Ra) for top surface for SLM produced parts is 3.4 µm while 2.83 µm for DMLS produced parts. The Ra for side surfaces for SLM produced parts is 4.57 µm while 9.0 µm for DMLS produced parts. The higher Ra values on side surfaces compared to the top faces for both manufacturing techniques was due to the balling effect phenomenon. The yield relative density for both Co-Cr-Mo parts produced by SLM and DMLS are 99.3%. Higher energy density has influence the higher density of produced samples by SLM and DMLS processes. The findings of this work demonstrated that SLM and DMLS process with default process parameters have effectively produced full dense parts of Co-Cr-Mo with high density, good agreement of geometrical accuracy and better surface finish. Despite of both manufacturing process yield that produced components with higher density, the current finding shows that SLM technique could produce components with smoother surface quality compared to DMLS

Evaluation of email alerts in practice: Part 2. Validation of the information assessment method.

Science.gov (United States)

Pluye, Pierre; Grad, Roland M; Johnson-Lafleur, Janique; Bambrick, Tara; Burnand, Bernard; Mercer, Jay; Marlow, Bernard; Campbell, Craig

2010-12-01

The information assessment method (IAM) permits health professionals to systematically document the relevance, cognitive impact, use and health outcomes of information objects delivered by or retrieved from electronic knowledge resources. The companion review paper (Part 1) critically examined the literature, and proposed a 'Push-Pull-Acquisition-Cognition-Application' evaluation framework, which is operationalized by IAM. The purpose of the present paper (Part 2) is to examine the content validity of the IAM cognitive checklist when linked to email alerts. A qualitative component of a mixed methods study was conducted with 46 doctors reading and rating research-based synopses sent on email. The unit of analysis was a doctor's explanation of a rating of one item regarding one synopsis. Interviews with participants provided 253 units that were analysed to assess concordance with item definitions. The content relevance of seven items was supported. For three items, revisions were needed. Interviews suggested one new item. This study has yielded a 2008 version of IAM. © 2010 Blackwell Publishing Ltd.

Available forest biomass for new energetic and industrial prospects. Part 1: analysis and synthesis of existing studies compiled at the international level. Part 2: volume calculations. Part 3: economic part. Final report

International Nuclear Information System (INIS)

2007-01-01

Motivated by new energetic constraints and the interest of biomass, the authors report a bibliographical survey of studies concerning the evaluation of the available forest biomass. They comment the geographical and time distribution of the identified and compiled studies. They analyse their different topics. Then, they discuss the various field hypotheses, discuss and comments various resource assessment methodologies. They comment the resource the French forest can be, present a synthesis of the available resource at the regional level according to the different studies. They propose a review of some technical-economical aspects (costs, energy cost, price evolutions, improvement of the wood-energy mobilization). The second part proposes a whole set of volume calculations for different forest types (clusters or plantations of trees, copses, sawmills products), for industry and household consumption. It discusses the available volumes with respect to accessibility, additional available volumes, and possible improvements. The third part analyses, comments and discusses the wood market and wood energetic uses, and the possible supply curves for wood energetic uses by 2016

Injuries to the shoulder in the throwing athlete. Part two: evaluation/treatment.

Science.gov (United States)

Meister, K

2000-01-01

In part one of this three-part series (March/April 2000), I concentrated on summarizing the biomechanics of the normal throwing shoulder and the pathophysiology of injury. A classification of injury was presented that was based on the principles contained in that article. Part two of this series will focus on the evaluation and treatment of injuries, expanded from an understanding of the principles learned in part one. The ability to perform a skillful examination, and thus develop an accurate diagnosis, is the foundation for treatment. Fortunately, many difficulties encountered in a thrower's shoulder can be treated with a nonoperative approach. However, in instances where conservative measures fail, an improved understanding of the pathophysiology of injury and the development of improved surgical techniques are leading to more accurate diagnoses and more successful rates of return of the athlete to a premorbid level of activity.

Embodied simulation as part of affective evaluation processes: task dependence of valence concordant EMG activity.

Science.gov (United States)

Weinreich, André; Funcke, Jakob Maria

2014-01-01

Drawing on recent findings, this study examines whether valence concordant electromyography (EMG) responses can be explained as an unconditional effect of mere stimulus processing or as somatosensory simulation driven by task-dependent processing strategies. While facial EMG over the Corrugator supercilii and the Zygomaticus major was measured, each participant performed two tasks with pictures of album covers. One task was an affective evaluation task and the other was to attribute the album covers to one of five decades. The Embodied Emotion Account predicts that valence concordant EMG is more likely to occur if the task necessitates a somatosensory simulation of the evaluative meaning of stimuli. Results support this prediction with regard to Corrugator supercilii in that valence concordant EMG activity was only present in the affective evaluation task but not in the non-evaluative task. Results for the Zygomaticus major were ambiguous. Our findings are in line with the view that EMG activity is an embodied part of the evaluation process and not a mere physical outcome.

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part II: Case studies and dose-response literature

International Nuclear Information System (INIS)

2005-01-01

This Part II of the report contains full versions of the case studies for air, water and land (Chapters 2-4), which were only summarised in Part I. In addition, during the work the research team has collected a large amount of literature and information on dose response relationships for air and water pollution relevant to China. This information is included as Chapters 5 and 6

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part II: Case studies and dose-response literature

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This Part II of the report contains full versions of the case studies for air, water and land (Chapters 2-4), which were only summarised in Part I. In addition, during the work the research team has collected a large amount of literature and information on dose response relationships for air and water pollution relevant to China. This information is included as Chapters 5 and 6.

Capsicum--production, technology, chemistry, and quality. Part IV. Evaluation of quality.

Science.gov (United States)

Govindarajan, V S; Rajalakshmi, D; Chand, N

1987-01-01

Capsicum fruits are popular worldwide and are used in the cuisines of both the developing and the developed countries. With its different varieties, forms, and uses, the spice capsicum contributes to the entire gamut of sensory experience--color as finely ground paprika powder or extract in sausages, goulash, cheese, and snacks; both pungency and color as the many varieties of chillies used in Mexican, African, Indian, and southeast Asian cuisines; color, aroma, and mild pungency as the fresh green chillies used in many of the growing countries; and appearance, color, aroma, and texture as fresh fruit in salads and as a pickled and canned product. In three earlier parts in this series, the varieties, cultivation, and primary processing; the processed products, world production, and trade; and the chemistry of the color, aroma, and pungency stimuli have been reviewed. In this part, the evaluation of quality through instrumental determination of the causal components and the sensory evaluation of color, aroma, and pungency are discussed. Several methods for quantitative determination of the stimuli and the sensory evaluation of the responses to the stimuli are reviewed. The problems of sensory evaluation of color, aroma, and pungency, the dominant attributes for validation of the instrumentally determined values for carotenoids, volatiles, or particular fractions, and total and individual capsaicinoids are specifically discussed. Summarized details of selected instrumental methods for evaluating the stimuli, which are either validated by correlation to sensorily perceived responses or to adopted standards, are given along with representative data obtained for discussing the adequacy and reliability of the methods. Pungency as a specific gustatory perception and the many methods proposed to evaluate this quality are discussed. A recommended objective procedure for obtaining reproducible values is discussed, and a method for relating different panel results is shown

Multi-approach evaluations of a cascade-Organic Rankine Cycle (C-ORC) system driven by diesel engine waste heat: Part A – Thermodynamic evaluations

International Nuclear Information System (INIS)

Shu, Gequn; Yu, Guopeng; Tian, Hua; Wei, Haiqiao; Liang, Xingyu; Huang, Zhiyong

2016-01-01

Highlights: • A novel C-ORC system was proposed for recovering waste heat from a diesel engine. • Thermodynamic evaluations were conducted to explore C-ORC’s practical benefits. • C-ORC has significant heat-recovery capacities and efficiency-promotion potential. • Up to 16.0% of engine efficiency can be improved combining with C-ORC. - Abstract: A novel transcritical cascade-Organic Rankine Cycle (C-ORC) system was proposed to recover multi-grade waste heat from a typical heavy-duty diesel engine. The C-ORC comprises of a high-temperature ORC loop (HT-Loop) and a low temperature ORC loop (LT-Loop) to recover waste heat from an engine’s exhaust gas (EG), exhaust gas recirculation (EGR), jacket water (JW) and charge air (CA) in a cascaded pattern. In order to reveal the full performance of the C-ORC system, with due consideration to diesel’s complex practical running conditions, multi-approach evaluations were conducted containing two parts: Part A – thermodynamic evaluations of the energy and exergy aspects and Part B – techno-economic evaluations on costs and benefits aspects. This paper shows the Part A – evaluations of the C-ORC, focusing on indexes including recovered waste heat, net power output, thermal efficiencies and exergy efficiencies. First of all, distributions of the engine’s multi-grade waste heat were studied to reveal the characteristics and utilization potential of waste energy. The comparison and screening of working fluids were carried out next to find the best fluids for the HT-Loop and LT-Loop respectively based on the rated engine condition. Toluene, decane, cyclohexane and D4 were four proper alternatives for the HT-Loop while R143a, R125, R218 and R41 were four proper alternatives for the LT-Loop. Comparisons indicated that toluene and R143a made the perfect match for the C-ORC with the highest net power output (33.9 kW), thermal efficiency (9.9%) and exergy efficiency (39.1%). The rankings of the two groups of

Evaluating the Effects of Pioneer Accountable Care Organizations on Medicare Part D Drug Spending and Utilization.

Science.gov (United States)

Zhang, Yuting; Caines, Kadin J; Powers, Christopher A

2017-05-01

The improvement of medication use is a critical mechanism that accountable care organization (ACO) could use to save overall costs. Currently pharmaceutical spending is not part of the calculation for ACO-shared savings and risks. Thus, ACO providers may have strong incentives to prescribe more medications hoping to avoid expensive downstream medical costs. We designed a quasinatural experiment study to evaluate the effects of Pioneer ACOs on Medicare Part D spending and utilization. Medicare fee-for-service beneficiaries with Part D drug coverage who were aligned to a Pioneer ACO were compared with a random 5% sample of non-ACO beneficiaries. Outcomes included changes in Part D spending, number of prescription fills, percent of brand medications, and total Part A and B medical spending. We utilized a generalized linear model with a difference-in-differences approach to estimate 2011-2012 changes in these outcomes among beneficiaries aligned with Pioneer ACOs, adjusting for all beneficiary-level demographics, income and insurance status, clinical characteristics, and regional fixed effects. Being in an ACO did not significantly affect Part D spending (-$23.52; P=0.19), total prescriptions filled (-0.12; P=0.27), and the percent of claims for brand-name drugs (0.06%; P=0.23). The ACO group was associated with savings in Parts A and B spending of $345 (PPioneer ACOs were not associated with changes in pharmaceutical spending and use, but were associated with savings in Parts A and B spending in 2012.

Non-destructive evaluation of welding part of stainless steels by phased array system

International Nuclear Information System (INIS)

Tatematsu, Nobuhiro; Matsumoto, Eiji

2009-01-01

Recently, more accurate and convenient Non-Destructive Evaluation techniques are required for flaw inspection of structural materials. Phased array ultrasonic transducers are expected as such as NDE technique but there are many subjects to be solved. Furthermore, commercial phased array systems with conventional scanning and imaging techniques have not fulfilled their maximum potential. The purpose of this paper is to improve the phased array system to be applicable to the inhomogeneity evaluation of welding part of stainless steels. (author)

Evaluation of anti-arthritic potential of the methanolic extract of the aerial parts of Costus speciosus

Directory of Open Access Journals (Sweden)

Shruti Srivastava

2012-01-01

Full Text Available Objective : Costus speciosus Koen. (Keu, Crape ginger, an ornamental plant, widely distributed in India is traditionally used as astringent, aphrodisiac, purgative, anthelmintic, depurative, febrifuge and expectorant. The plant is also used in rheumatism, dropsy, urinary diseases and jaundice. The purpose of this study is to evaluate the anti-arthritic activity of the methanolic extract of the aerial parts of Costus speciosus (CS in experimental animal models. Materials and Methods: The powdered drug was subjected to successive solvent extraction, with solvents in increasing order of polarity to obtain the methanolic extract of the aerial parts of the plant. CS was evaluated for anti-arthritic action by Freund′s adjuvant induced arthritis test in adult Albino rats (150-200 gm. Rats were injected 0.1 ml of complete Freund′s adjuvant into the planter region of the left hind paw. Statistical analysis was performed using One way analysis of variance (ANOVA followed by Bonferonni test. P<0.05 was considered statistically significant. Results : The methanolic extract of CS in doses of 400 and 800 mg/kg showed 75.50% and 68.33% protection against increase in paw edema, respectively. CS showed dose-dependent action in all the experimental models. Conclusion : The present study indicates that CS has significant anti-arthritic properties.

A HACCP-based approach to mastitis control in dairy herds. Part 2: Implementation and evaluation

Science.gov (United States)

2011-01-01

Part 1 of the study described the development of a Hazard Analysis and Critical Control Point (HACCP) based programme and accompanying handbook for the control of mastitis. This paper describes the implementation and evaluation of customised HACCP-based programmes, which were developed from the handbook and assessed on six Irish dairy farms. Both quantitative and qualitative (action research) research methodologies were used to measure the success of implementation and efficacy of control of sub-clinical mastitis as measured by Somatic Cell Counts (SCC) and the degree of compliance by farmers in adopting and maintaining recommendations throughout the course of the study period. No overall differences in SCC before and during the implementation of the study were found when all six farms were considered together. Three of the six study farms experienced a significant decrease in herd milk recorded SCC during the implementation of the control programme. An essential part of the study was achieving initial agreement on recommendations as well as ongoing monitoring of compliance during the study. This pilot study shows that HACCP can be implemented on farms as a means of working towards the control of mastitis and that farmer attitude, and understanding of mastitis are crucial in terms of motivation irrespective of practical approaches used to manage mastitis. PMID:21777494

The Aalborg Survey / Part 4 - Literature Study

DEFF Research Database (Denmark)

Harder, Henrik; Christensen, Cecilie Breinholm

Background and purpose The Aalborg Survey consists of four independent parts: a web, GPS and an interview based survey and a literature study, which together form a consistent investigation and research into use of urban space, and specifically into young people’s use of urban space: what young......) and the research focus within the cluster of Mobility and Tracking Technologies (MoTT), AAU. Summary / Part 4 - Literature Study The 4th part of the DUS research project has been carried out during the spring 2012 and consists primarily of a literature search and bibliographical listings of literature by the three....... Jensen are conducting research within the field related to this research project. Furthermore, both are intended end users of the outcome of this literature study. Finally, all references have been collected in a digital database in RefWorks....

Study on strength of thick reinforced concrete slab with opening - Part 2: Evaluation of the test results

International Nuclear Information System (INIS)

Hirai, T.; Itoh, M.; Takei, K.; Kanazu, T.; Abe, Y.; Takahashi, T.; Hayashi, N.; Sasaki, N.

1993-01-01

In comparing the strength of the partial models obtained from the test and the strength calculated by the various formulas for short span cantilevers based on recent research, it was found that the strength of the partial models coincided well with the calculated bending strength. It was confirmed that bending failure also preceded in the overall model from the tests. However various strengths such as the cracking strength and the yielding strength of rebars were larger, and displacements and strains in various parts were smaller than those in the partial models. It was attributed to the effects of circumferential distribution of the load. A convenient method was proposed for evaluation of the strength of the overall model. In this method, the overall model is divided into corbels, and the strength of the model is calculated as the sum of these corbels' strength. This method estimated the strength conveniently and conservatively. (author)

Oak Ridge Health Studies Phase 1 report, Volume 2, Part B, Dose Reconstruction Feasibility Study

International Nuclear Information System (INIS)

Brorby, G.P.; Bruce, G.M.; Widner, T.E.

1993-09-01

While each of the three different screening comparisons made in this report (i.e., within-medium evaluation, between-media evaluation and relative importance grouping) individually provides information potentially of value in focusing future studies, each one is subject to a variety of limitations, the most important being associated with the absence or variable quality of environmental data for a number of the contaminants and media. These screening exercises are intended to provide an initial framework for approaching the study of an extremely complex site. Other approaches could very well yield somewhat different priorities, and the identification or reinterpretation of data in subsequent detailed studies are likely to invalidate some of the results of these screening exercises. However, these evaluations provide a logical approach to defining initial off- site health impact study priorities for the ORR. Therefore, while care must be taken in attempting to make any broad generalizations or greatly simplifying assumptions with regard to the potential health hazards posed by the complex releases from the Reservation, Table 6-1 represents an attempt to summarize a set of recommendations that are derived from the screening exercises presented in this report. Table 6-1 identifies the facilities, processes and contaminants believed to have the highest potential for resulting in off-site health impacts. Table 6-2 identifies contaminants for which no ranking could be performed as part of this feasibility study, because of the absence of any appropriate data for any environmental medium

Drug interactions evaluation: An integrated part of risk assessment of therapeutics

International Nuclear Information System (INIS)

Zhang, Lei; Reynolds, Kellie S.; Zhao, Ping; Huang, Shiew-Mei

2010-01-01

Pharmacokinetic drug interactions can lead to serious adverse events or decreased drug efficacy. The evaluation of a new molecular entity's (NME's) drug-drug interaction potential is an integral part of risk assessment during drug development and regulatory review. Alteration of activities of enzymes or transporters involved in the absorption, distribution, metabolism, or excretion of a new molecular entity by concomitant drugs may alter drug exposure, which can impact response (safety or efficacy). The recent Food and Drug Administration (FDA) draft drug interaction guidance ( (http://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/ucm072101.pdf)) highlights the methodologies and criteria that may be used to guide drug interaction evaluation by industry and regulatory agencies and to construct informative labeling for health practitioner and patients. In addition, the Food and Drug Administration established a 'Drug Development and Drug Interactions' website to provide up-to-date information regarding evaluation of drug interactions ( (http://www.fda.gov/Drugs/DevelopmentApprovalProcess/DevelopmentResources/DrugInteractionsLabeling/ucm080499.htm)). This review summarizes key elements in the FDA drug interaction guidance and new scientific developments that can guide the evaluation of drug-drug interactions during the drug development process.

Open reduction and internal fixation of three and four-part fractures of the proximal part of the humerus

NARCIS (Netherlands)

Wijgman, A. J.; Roolker, W.; Patt, T. W.; Raaymakers, E. L. F. B.; Marti, R. K.

2002-01-01

BACKGROUND: Controversy persists concerning the preferred treatment of displaced fractures of the proximal part of the humerus. The present study was undertaken to evaluate the results of open reduction and internal fixation of three and four-part fractures of the proximal part of the humerus and

Evaluating QR Code Case Studies Using a Mobile Learning Framework

Science.gov (United States)

Rikala, Jenni

2014-01-01

The aim of this study was to evaluate the feasibility of Quick Response (QR) codes and mobile devices in the context of Finnish basic education. The feasibility was analyzed through a mobile learning framework, which includes the core characteristics of mobile learning. The study is part of a larger research where the aim is to develop a…

Statistical evaluations concerning the failure behaviour of formed parts with superheated steam flow. Pt. 1

International Nuclear Information System (INIS)

Oude-Hengel, H.H.; Vorwerk, K.; Heuser, F.W.; Boesebeck, K.

1976-01-01

Statistical evaluations concerning the failure behaviour of formed parts with superheated-steam flow were carried out using data from VdTUEV inventory and failure statistics. Due to the great number of results, the findings will be published in two volumes. This first part will describe and classify the stock of data and will make preliminary quantitative statements on failure behaviour. More differentiated statements are made possible by including the operation time and the number of start-ups per failed part. On the basis of time-constant failure rates some materials-specific statements are given. (orig./ORU) [de

Comparative Anti-Diabetic Evaluation of Different Parts of Himalrandia tetrasperma in Alloxan Induced Diabetic in Mice

International Nuclear Information System (INIS)

Ajaib, M.

2016-01-01

The present experiments were designed to investigate the acute effects of methanolic extracts of various parts of H. tetrasperma in diabetic mice. The basic phyto-chemical study showed the occurrence of alkaloids, saponins, flavonoids and tannins as main phyto-constituents in the methanolic extract. Diabetes was induced experimentally in mice by intra peritoneally injecting alloxan (150 mg/kg i.p.). In acute study, methanolic H. tetrasperma extracts of various parts of plant were evaluated for anti-diabetic potential in alloxan induced diabetic mice. Extracts of leaves, bark and seeds (250 mg/kg, i.p) and metformin (250 mg/kg i.p) were given intra peritoneal in alloxan treated diabetic mice and blood glucose levels were measured at 0, 360 and 24 h. There was significant lowering of blood glucose level at 1 h after treatment, in diabetic mice treated with methanolic extracts of bark (182.3 ± 3.6 mg/dL), leaves (178.5 ± 1.2 mg/dL) and seeds (156.3 ± 11.3 mg/dL) when compared with control diabetic group (280 ± 7.92 mg/dL). Highly significant results were also obtained at 24 h after treatment with methanolic extracts of bark (187.67 ±1.2 mg/dL), leaves (170.66 ± 2.3 mg/dL) and seeds (142 ± 8.7 mg/dL) when compared with control diabetic group (257.7 ± 6.7 mg/dL). It is concluded that methanolic extract of all parts possess significant anti-diabetic activity which is due to the presence of phytochemicals, i.e. alkaloids, flavonoids, phenols, saponins, tannins and it can be further evaluated for the mechanism involved. (author)

Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part B, Remedial Action

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1 and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the ranking os remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. The focus of Vol. 1, Pt. B, is RA, and it has been divided into six chapters. The first chapter is an introduction, which defines problems specific to the ER Program for ORNL. Chapter 2 provides a general overview of the TLD. Chapters 3 through 5 are organized into necessary subelement categories: RA, characterization, and robotics and automation. The final chapter contains regulatory compliance information concerning RA.

Power plant site evaluation - Douglas Point site. Volume 1, part 2. Final report

International Nuclear Information System (INIS)

1977-11-01

This is part of a series of reports containing an evaluation of the proposed Douglas Point nuclear generating station site located on the Potomac River in Maryland 30 miles south of Washington, DC. This report contains sections on cooling tower air emissions, noise impacts, transmission line effects, radiation from normal releases, site features affecting radiological accidents, and meteorology

Solitary pulmonary nodule and 18F-FDG PET/CT. Part 1: epidemiology, morphological evaluation and cancer probability

Directory of Open Access Journals (Sweden)

Marcos Pretto Mosmann

2016-02-01

Full Text Available Abstract Solitary pulmonary nodule corresponds to a common radiographic finding, which is frequently detected incidentally. The investigation of this entity remains complex, since characteristics of benign and malignant processes overlap in the differential diagnosis. Currently, many strategies are available to evaluate solitary pulmonary nodules with the main objective of characterizing benign lesions as best as possible, while avoiding to expose patients to the risks inherent to invasive methods, besides correctly detecting cases of lung cancer so as the potential curative treatment is not delayed. This first part of the study focuses on the epidemiology, the morfological evaluation and the methods to determine the likelihood of cancer in cases of indeterminate solitary pulmonary nodule.

A Study on the Evaluation Technology of Welds Integrity in Nuclear Power Plants

International Nuclear Information System (INIS)

Chang, Hyun Young; Kim, Jong Sung; Jin, Tae Eun

2007-01-01

The final goal of this study is to develop the core technologies applicable to the design, operation and maintenance of welds in nuclear structures. This study includes predicting microstructure changes and residual stress for welded parts of nuclear power plant components. Furthermore, researches are performed on evaluating fatigue, corrosion, and hydrogen induced cracking and finally constructs systematically integrated evaluation system for structural integrity of nuclear welded structures. In this study, metallurgical and mechanical approaches have been effectively coordinated considering real welding phenomena in the fields of welds properties such as microstructure, composition and residual stress, and in the fields of damage evaluations such as fatigue, corrosion, fatigue crack propagation, and stress corrosion cracking. Evaluation techniques tried in this study can be much economical and effective in that it uses theoretical/semi-empirical but includes many additional parameters that can be introduced in real phenomena such as phase transformation, strength mismatch and residual stress. It is clear that residual stress makes great contribution to fatigue and stress corrosion cracking. Therefore the mitigation techniques have been approached by reducing the residual stress of selected parts resulting in successful conclusions

Professional Learning in Part-time University Study

DEFF Research Database (Denmark)

Rasmussen, Palle

2007-01-01

The theme of this article is adult students' learning in part-time studies at university level in Denmark. One issue discussed is the interplay of research and teaching in this kind of study programme. Examples are presented from the Master of Learning Processes study programme at Aalborg...

Computer program system for evaluation of FP nuclear data for JENDL. Smooth part

Energy Technology Data Exchange (ETDEWEB)

Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Watanabe, Takashi; Iijima, Shungo

1997-12-01

This report describes computer programs used to evaluate nuclear data of fission product (FP) nuclides stored in an evaluated nuclear data library JENDL, especially in the smooth part above the resonance region. Many programs were used for determination of nuclear model parameters, calculation of nuclear data, handling of experimental and/or calculated data, and so on. Among them, reported here are programs for determination of level density parameters (ENSDFRET, LVLPLOT, LEVDES), for making sets of JCL and input data for the theoretical calculation program CASTHY (JOBSETTER, INDES/CASTHY), and for conversion of format of CASTHY output files to the ENDF format (CTOB2). (author). 51 refs.

Expermental Studies of quantitative evaluation using HPLC

Directory of Open Access Journals (Sweden)

Ki Rok Kwon

2005-06-01

Full Text Available Methods : This study was conducted to carry out quantitative evaluation using HPLC Content analysis was done using HPLC Results : According to HPLC analysis, each BVA-1 contained approximately 0.36㎍ melittin, and BVA-2 contained approximately 0.54㎍ melittin. But the volume of coating was so minute, slight difference exists between each needle. Conclusion : Above results indicate that the bee venom acupuncture can complement shortcomings of syringe usage as a part of Oriental medicine treatment, but extensive researches should be done for further verification.

Publishing studies: being part of a cultural practice plus x ?

Directory of Open Access Journals (Sweden)

Christoph Bläsi

2015-07-01

Full Text Available In some parts of the world, Publishing Studies are a fairly well-established field of research as well as of higher education. Not least since this is not so much the case in continental Europe, the Publishing Studies community increasingly sees a more elaborated self-concept as an important prerequisite for a prosperous further development of the field in research as well as in teaching. This paper starts off by relating the question for an advanced self-concept of Publishing Studies to the question what criteria have to be fulfilled to call a field (like Publishing Studies a scholarly discipline. As the second source for the possible formation of a more elaborate self-concept, the paper presents the first results of an ongoing empirical research project. In this projects, extensive expert interviews with representatives of UK Publishing Studies study programs and research institutions are evaluated to shed light on the core questions related to Publishing Studies as a discipline / „discipline“ in a bottom-up manner. After presenting a very clear and differentiated North American view as an additional point of reference, a contribution to the discussion on Publishing Studies is proposed.

Evaluation of polyphenol content in different parts of physalis ixocarpa

International Nuclear Information System (INIS)

Bakht, J.; Shafi, M.

2016-01-01

In the current study extracts of leaf, stem, fruit and calyx with different polarity was investigated for their phenolic content using high performance liquid chromatography and spectrophotometric assay. Among different parts, stem contain high concentration of total polyphenol and gallic acid. The effect of extraction solvent on polyphenol quantification was observed in both assays. Spectrophotometric analysis of the data regarding polyphenol content indicated that among different extracts from the stem, leaf and fruit tissues; ethyl acetate extracted fraction of stem measured maximum polyphenol content of 110.376 mgGAE/g of dry extract. The ethyl acetate extracted sample of leaf showed high polyphenol (Gallic acid) content of 95 mg GAE/g of dry extract using high performance liquid chromatography assay. The amounts of phenolic content (Gallic acid) extracted from the parts of the plant with the different solvent ranged from 0.0354- 95 mg GAE/g of the dry extract using HPLC, however, spectrophotometric assay indicated total polyphenol ranged from 38-110.37 mgGAE g-1 of the dry extract. The current study suggested that ethyl acetate is an effective solvent for the extraction of polyphenol in different parts of P. ixocarapa. (author)

ATWS: a reappraisal, part II, evaluation of societal risks due to reactor protection systems failure. Vol. 3. Pwr risk analysis. Phase report

International Nuclear Information System (INIS)

Lellouche, G.S.

1976-08-01

This document is the third volume of part 2 in a series of studies which will examine the basis for the problem of Anticipated Transients Without Scram (ATWS). The purpose of part 2 is an evaluation of societal risks due to RPS failure based on more current data and methodology than used in WASH-1270. This volume examines and documents the potential contribution to societal risk due to ATWS in the PWR. Volumes 1 and 2 described a similar analysis for the BWR

Life time evaluation of spectrum loaded machine parts

Energy Technology Data Exchange (ETDEWEB)

Rabb, R. [Waertsilae NSD Corporation, Vaasa (Finland)

1998-12-31

In a medium speed diesel engine there are some important components, such as the cylinder head, the piston and the cylinder liner, which are subjected to a specific load spectrum consisting of mainly two distinct parts. One is the low cycle part which is due to the temperature field that builds up after that the engine has been started. This low cycle part causes a big stress amplitude but consists of only a couple of thousand cycles during the engine life time. The other part of the load spectrum is the high cycle part due to the firing pressure. The high cycle part has a smaller amplitude but consists of billions of cycles during the engine life time. The cylinder head and the cylinder liner are made of cast iron. In this investigation the true extension into the high cycle domain of the S-N curve for grey cast iron grade 300/ISO 185 was established through fatigue tests with a load spectrum resembling the existing one. This testing resulted in much new and improved knowledge about the fatigue properties of grey cast iron and it was even possible to generalize the outcome of the spectrum fatigue tests into a simple design curve. (orig.) 11 refs.

A Multiple Case Study Discovering Part-Time Faculties' Perceptions of Their Professional Needs, Working Conditions, Social Network, and Job Satisfaction at Three Community Colleges

Science.gov (United States)

Millner-Harlee, Tanya

2010-01-01

This study employed a multiple case study design to evaluate the perspectives of part-time faculties at three community colleges in the Northeast. The purpose of this study was to discover how needs, working conditions, and social networks influence the part-time faculties' job satisfaction. Maslow (1954), Bourdieu (1986), and Herzberg, Mausner,…

Solitary pulmonary nodule and {sup 18}F-FDG PET/CT. Part 1: epidemiology, morphological evaluation and cancer probability

Energy Technology Data Exchange (ETDEWEB)

Mosmann, Marcos Pretto; Borba, Marcelle Alves; Macedo, Francisco Pires Negromonte; Liguori, Adriano de Araujo Lima; Villarim Neto, Arthur, E-mail: mosmann@gmail.com [Liga Norte Riograndense Contra o Cancer, Natal, RN (Brazil); Lima, Kenio Costa de [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Saude Coletiva

2016-01-15

Solitary pulmonary nodule corresponds to a common radiographic finding, which is frequently detected incidentally. The investigation of this entity remains complex, since characteristics of benign and malignant processes overlap in the differential diagnosis. Currently, many strategies are available to evaluate solitary pulmonary nodules with the main objective of characterizing benign lesions as best as possible, while avoiding to expose patients to the risks inherent to invasive methods, besides correctly detecting cases of lung cancer so as the potential curative treatment is not delayed. This first part of the study focuses on the epidemiology, the morphological evaluation and the methods to determine the likelihood of cancer in cases of indeterminate solitary pulmonary nodule. (author)

Evaluation of the real parts of fermion and boson propagators using dispersion relations

International Nuclear Information System (INIS)

Davies, K.T.R.; Davies, R.W.

1991-01-01

General methods are developed for efficiently evaluating principal-value integrals containing fermion and boson causal propagators. These methods are particularly applicable to integrals containing step functions which appear in the zero temperature limit of infinite nuclear matter. Examples are given for the Green functions that occur in the solution of Dyson's equations, with the inclusion of nucleon-delta-mesonic interactions. It is shown how to discretize in order to evaluate numerically the real parts of the propagators. If the real and purely imaginary self-energies of a propagator obey a dispersion relation, then the propagator itself satisfies such a relation. Finally, we discuss the two types of resonances occurring in the pion Green function. (orig.)

The Role of the School Nurse in the Special Education Process: Part I: Student Identification and Evaluation.

Science.gov (United States)

Yonkaitis, Catherine F; Shannon, Robin A

2017-05-01

Every U.S. student is entitled to a free and appropriate education. School districts must identify and evaluate any child who they find is unable to engage fully in learning as a participant in the general education curriculum. The Individuals with Disabilities Education Act of 2004 requires that these students be assessed by qualified individuals in any areas that may be impacting learning, including health, vision, hearing, social and emotional status, communicative status, and motor abilities. The school nurse, as the health expert, has an important role to play as a member of the special education team in evaluating whether a student has health concerns that are impacting learning and how health barriers to learning might be reduced. As part of the full and individual evaluation, the school nurse composes a written report and makes recommendations to the team regarding necessary health services and other modifications the student may need. This article (Part 1 of 2) will outline the school nurse's role in identification and evaluation of students who may benefit from special education services.

Evaluation and perceived results of moral case deliberation: A mixed methods study

NARCIS (Netherlands)

Janssens, R.; van Zadelhoff, E.; van Loo, G.; Widdershoven, G.A.; Molewijk, A.C.

2015-01-01

Background: Moral case deliberation is increasingly becoming part of various Dutch healthcare organizations. Although some evaluation studies of moral case deliberation have been carried out, research into the results of moral case deliberation within aged care is scarce. Research questions: How did

Performance evaluations of continuous glucose monitoring systems: precision absolute relative deviation is part of the assessment.

Science.gov (United States)

Obermaier, Karin; Schmelzeisen-Redeker, Günther; Schoemaker, Michael; Klötzer, Hans-Martin; Kirchsteiger, Harald; Eikmeier, Heino; del Re, Luigi

2013-07-01

Even though a Clinical and Laboratory Standards Institute proposal exists on the design of studies and performance criteria for continuous glucose monitoring (CGM) systems, it has not yet led to a consistent evaluation of different systems, as no consensus has been reached on the reference method to evaluate them or on acceptance levels. As a consequence, performance assessment of CGM systems tends to be inconclusive, and a comparison of the outcome of different studies is difficult. Published information and available data (as presented in this issue of Journal of Diabetes Science and Technology by Freckmann and coauthors) are used to assess the suitability of several frequently used methods [International Organization for Standardization, continuous glucose error grid analysis, mean absolute relative deviation (MARD), precision absolute relative deviation (PARD)] when assessing performance of CGM systems in terms of accuracy and precision. The combined use of MARD and PARD seems to allow for better characterization of sensor performance. The use of different quantities for calibration and evaluation, e.g., capillary blood using a blood glucose (BG) meter versus venous blood using a laboratory measurement, introduces an additional error source. Using BG values measured in more or less large intervals as the only reference leads to a significant loss of information in comparison with the continuous sensor signal and possibly to an erroneous estimation of sensor performance during swings. Both can be improved using data from two identical CGM sensors worn by the same patient in parallel. Evaluation of CGM performance studies should follow an identical study design, including sufficient swings in glycemia. At least a part of the study participants should wear two identical CGM sensors in parallel. All data available should be used for evaluation, both by MARD and PARD, a good PARD value being a precondition to trust a good MARD value. Results should be analyzed and

The part task of the part-spacing paradigm is not a pure measurement of part-based information of faces.

Directory of Open Access Journals (Sweden)

Qi Zhu

Full Text Available BACKGROUND: Faces are arguably one of the most important object categories encountered by human observers, yet they present one of the most difficult challenges to both the human and artificial visual systems. A variety of experimental paradigms have been developed to study how faces are represented and recognized, among which is the part-spacing paradigm. This paradigm is presumed to characterize the processing of both the featural and configural information of faces, and it has become increasingly popular for testing hypotheses on face specificity and in the diagnosis of face perception in cognitive disorders. METHODOLOGY/PRINCIPAL FINDINGS: In two experiments we questioned the validity of the part task of this paradigm by showing that, in this task, measuring pure information about face parts is confounded by the effect of face configuration on the perception of those parts. First, we eliminated or reduced contributions from face configuration by either rearranging face parts into a non-face configuration or by removing the low spatial frequencies of face images. We found that face parts were no longer sensitive to inversion, suggesting that the previously reported inversion effect observed in the part task was due in fact to the presence of face configuration. Second, self-reported prosopagnosic patients who were selectively impaired in the holistic processing of faces failed to detect part changes when face configurations were presented. When face configurations were scrambled, however, their performance was as good as that of normal controls. CONCLUSIONS/SIGNIFICANCE: In sum, consistent evidence from testing both normal and prosopagnosic subjects suggests the part task of the part-spacing paradigm is not an appropriate task for either measuring how face parts alone are processed or for providing a valid contrast to the spacing task. Therefore, conclusions from previous studies using the part-spacing paradigm may need re-evaluation with

Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

Geologic and hydrologic characterization and evaluation of the Basin and Range Province relative to the disposal of high-level radioactive waste. Part I. Introduction and guidelines

International Nuclear Information System (INIS)

Bedinger, M.S.; Sargent, K.A.; Reed, J.E.

1984-01-01

The US Geological Survey's program for geologic and hydrologic evaluation of physiographic provinces to identify areas potentially suitable for locating repository sites for disposal of high-level nuclear wastes was announced to the Governors of the eight states in the Basin and Range Province on May 5, 1981. Representatives of Arizona, California, Idaho, New Mexico, Nevada, Oregon, Texas, and Utah, were invited to cooperate with the federal government in the evaluation process. Each governor was requested to nominate an earth scientist to represent the state in a province working group composed of state and US Geological Survey representatives. This report, Part I of a three-part report, provides the background, introduction and scope of the study. This part also includes a discussion of geologic and hydrologic guidelines that will be used in the evaluation process and illustrates geohydrologic environments and the effect of individual factors in providing multiple natural barriers to radionuclide migration. 27 refs., 6 figs., 1 tab

The scope of costs in alcohol studies: Cost-of-illness studies differ from economic evaluations.

Science.gov (United States)

van Gils, Paul F; Hamberg-van Reenen, Heleen H; van den Berg, Matthijs; Tariq, Luqman; de Wit, G Ardine

2010-07-06

Alcohol abuse results in problems on various levels in society. In terms of health, alcohol abuse is not only an important risk factor for chronic disease, but it is also related to injuries. Social harms which can be related to drinking include interpersonal problems, work problems, violent and other crimes. The scope of societal costs related to alcohol abuse in principle should be the same for both economic evaluations and cost-of-illness studies. In general, economic evaluations report a small part of all societal costs. To determine the cost- effectiveness of an intervention it is necessary that all costs and benefits are included. The purpose of this study is to describe and quantify the difference in societal costs incorporated in economic evaluations and cost-of-illness studies on alcohol abuse. To investigate the economic costs attributable to alcohol in cost-of-illness studies we used the results of a recent systematic review (June 2009). We performed a PubMed search to identify economic evaluations on alcohol interventions. Only economic evaluations in which two or more interventions were compared from a societal perspective were included. The proportion of health care costs and the proportion of societal costs were estimated in both type of studies. The proportion of healthcare costs in cost-of-illness studies was 17% and the proportion of societal costs 83%. In economic evaluations, the proportion of healthcare costs was 57%, and the proportion of societal costs was 43%. The costs included in economic evaluations performed from a societal perspective do not correspond with those included in cost-of-illness studies. Economic evaluations on alcohol abuse underreport true societal cost of alcohol abuse. When considering implementation of alcohol abuse interventions, policy makers should take into account that economic evaluations from the societal perspective might underestimate the total effects and costs of interventions.

Estimation of Global 1km-grid Terrestrial Carbon Exchange Part II: Evaluations and Applications

Science.gov (United States)

Murakami, K.; Sasai, T.; Kato, S.; Niwa, Y.; Saito, M.; Takagi, H.; Matsunaga, T.; Hiraki, K.; Maksyutov, S. S.; Yokota, T.

2015-12-01

Global terrestrial carbon cycle largely depends on a spatial pattern in land cover type, which is heterogeneously-distributed over regional and global scales. Many studies have been trying to reveal distribution of carbon exchanges between terrestrial ecosystems and atmosphere for understanding global carbon cycle dynamics by using terrestrial biosphere models, satellite data, inventory data, and so on. However, most studies remained within several tens of kilometers grid spatial resolution, and the results have not been enough to understand the detailed pattern of carbon exchanges based on ecological community and to evaluate the carbon stocks by forest ecosystems in each countries. Improving the sophistication of spatial resolution is obviously necessary to enhance the accuracy of carbon exchanges. Moreover, the improvement may contribute to global warming awareness, policy makers and other social activities. We show global terrestrial carbon exchanges (net ecosystem production, net primary production, and gross primary production) with 1km-grid resolution. The methodology for these estimations are shown in the 2015 AGU FM poster "Estimation of Global 1km-grid Terrestrial Carbon Exchange Part I: Developing Inputs and Modelling". In this study, we evaluated the carbon exchanges in various regions with other approaches. We used the satellite-driven biosphere model (BEAMS) as our estimations, GOSAT L4A CO2 flux data, NEP retrieved by NICAM and CarbonTracer2013 flux data, for period from Jun 2001 to Dec 2012. The temporal patterns for this period were indicated similar trends between BEAMS, GOSAT, NICAM, and CT2013 in many sub-continental regions. Then, we estimated the terrestrial carbon exchanges in each countries, and could indicated the temporal patterns of the exchanges in large carbon stock regions.Global terrestrial carbon cycle largely depends on a spatial pattern of land cover type, which is heterogeneously-distributed over regional and global scales. Many

Evaluating psychodiagnostic decisions.

Science.gov (United States)

Witteman, Cilia L M; Harries, Clare; Bekker, Hilary L; Van Aarle, Edward J M

2007-02-01

Several frameworks can be used to evaluate decision making. These may relate to different aspects of the decision-making process, or concern the decision outcome. Evaluations of psychodiagnostic decisions have shown diagnosticians to be poor decision makers. In this essay we argue that this finding results from the evaluation of only one part of the diagnostic process. We put forward that evaluations are typically carried out by comparing clinicians' behaviour to one of several normative models, for example hypothetico-deductive reasoning. These models make strong assumptions about human reasoning capabilities, which make it almost impossible for people to measure up to them. The subsequent two parts of the psychodiagnostic process (causal explanation and treatment decisions), are typically not included in these evaluation studies. Treatment decisions are evaluated in effectiveness studies; that is, they are evaluated in terms of their outcomes, not in terms of the diagnosticians' decision processes. Psychodiagnosticians' causal explanation has hardly ever been the subject of evaluation. We argue that in order to achieve clinical excellence, this part of the psychodiagnostic process should also be well understood. In this essay we first describe evaluation of psychodiagnostic decision making. We then propose a framework to describe causal explanation, that is, a situation assessment in terms of a causal schema or a story or script. We identify and discuss the tools available for evaluating this part of the psychodiagnostic process.

A study of drying and cleaning methods used in preparation for fluorescent penetrant inspection - Part II

International Nuclear Information System (INIS)

Brasche, L.; Lopez, R.; Larson, B.

2003-01-01

Fluorescent penetrant inspection is the most widely used method for aerospace components such as critical rotating components of gas turbine engines. Successful use of FPI begins with a clean and dry part, followed by a carefully controlled and applied FPI process, and conscientious inspection by well trained personnel. A variety of cleaning methods are in use for cleaning of titanium and nickel parts with selection based on the soils or contamination to be removed. Cleaning methods may include chemical or mechanical methods with sixteen different types studied as part of this program. Several options also exist for use in drying parts prior to FPI. Samples were generated and exposed to a range of conditions to study the effect of both drying and cleaning methods on the flaw response of FPI. Low cycle fatigue (LCF) cracks were generated in approximately 40 nickel and 40 titanium samples for evaluation of the various cleaning methods. Baseline measurements were made for each of the samples using a photometer to measure sample brightness and a UVA videomicroscope to capture digital images of the FPI indications. Samples were exposed to various contaminants, cleaned and inspected. Brightness measurements and digital images were also taken to compare to the baseline data. A comparison of oven drying to flash dry in preparation for FPI has been completed and will be reported in Part I. Comparison of the effectiveness of various cleaning methods for the contaminants will be presented in Part II. The cleaning and drying studies were completed in cooperation with Delta Airlines using cleaning, drying and FPI processes typical of engine overhaul processes and equipment. The work was completed as part of the Engine Titanium Consortium and included investigators from Honeywell, General Electric, Pratt and Whitney, and Rolls Royce

A study of drying and cleaning methods used in preparation for fluorescent penetrant inspection - Part I

International Nuclear Information System (INIS)

Brasche, L.; Lopez, R.; Larson, B.

2003-01-01

Fluorescent penetrant inspection is the most widely used method for aerospace components such as critical rotating components of gas turbine engines. Successful use of FPI begins with a clean and dry part, followed by a carefully controlled and applied FPI process, and conscientious inspection by well trained personnel. A variety of cleaning methods are in use for cleaning of titanium and nickel parts with selection based on the soils or contamination to be removed. Cleaning methods may include chemical or mechanical methods with sixteen different types studied as part of this program. Several options also exist for use in drying parts prior to FPI. Samples were generated and exposed to a range of conditions to study the effect of both drying and cleaning methods on the flaw response of FPI. Low cycle fatigue (LCF) cracks were generated in approximately 40 nickel and 40 titanium samples for evaluation of the various cleaning methods. Baseline measurements were made for each of the samples using a photometer to measure sample brightness and a UVA videomicroscope to capture digital images of the FPI indications. Samples were exposed to various contaminants, cleaned and inspected. Brightness measurements and digital images were also taken to compare to the baseline data. A comparison of oven drying to flash dry in preparation for FPI has been completed and will be reported in Part I. Comparison of the effectiveness of various cleaning methods for the contaminants will be presented in Part II. The cleaning and drying studies were completed in cooperation with Delta Airlines using cleaning, drying and FPI processes typical of engine overhaul processes and equipment. The work was completed as part of the Engine Titanium Consortium and included investigators from Honeywell, General Electric, Pratt and Whitney, and Rolls Royce

A creative arts intervention for children with diabetes. Part 2: evaluation.

Science.gov (United States)

Basso, Robert V J; Pelech, William James

2008-12-01

In Part 1 of this article (published in the October 2008 issue), we discussed the importance of using creative arts skits as an expressive technique for children with Type 1, or juvenile, diabetes. This creative arts intervention offers children the opportunity to decipher emotional difficulties through symbolic play in a secure atmosphere. Analysis of feelings following the skits encourages children to share concerns about their illnesses as well as self-concept issues. In Part 2, we use the case study method to demonstrate the benefits of creative arts skits for children with diabetes.

Safety study of PCC 2140 and ALILOG 21 used as part of safety measurement systems

International Nuclear Information System (INIS)

Meriaux, Pierre; Adnot, Serge; Rayrolles, Catherine.

1978-03-01

The PCC 2140 and ALILOG 21 equipment may be used at C.E.A. or E.D.F., as part of safety measurement systems. In a study of a similar, but earlier equipment, it was noticed that certain types of failures caused the system to switch to the least sensitive measurement range, which was detrimental to safety. This report analyses failure modes leading to unsafe failures and evaluates the risks ran into taking in account tests during use [fr

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation

Directory of Open Access Journals (Sweden)

Quan Chen

2018-01-01

Full Text Available Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees’ low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees’ job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice.

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation

Science.gov (United States)

Chen, Quan; Tsai, Sang-Bing; Zhou, Jie; Yu, Jian; Chang, Li-Chung; Li, Guodong; Zheng, Yuxiang; Wang, Jiangtao

2018-01-01

Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees’ low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees’ job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice. PMID:29301375

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation.

Science.gov (United States)

Chen, Quan; Tsai, Sang-Bing; Zhai, Yuming; Zhou, Jie; Yu, Jian; Chang, Li-Chung; Li, Guodong; Zheng, Yuxiang; Wang, Jiangtao

2018-01-03

Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees' low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees' job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice.

Producing Hardwood Dimension Parts Directly From Logs: An Economic Feasibility Study

Science.gov (United States)

Wenjie Lin; D. Earl Kline; Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

The economic feasibility and profitability of a direct processing system for converting Factory Grades 2 and 3 red oak logs directly into rough dimension parts were evaluated. New present value (NPV) and internal rate of return (IRR) were used as the measurement of economic feasibility, and return on sales (ROS) was used as the measurement of profitability. NPV and IRR...

Pharmaceutical research at the AAEC Part I: Ligand synthesis and biological studies

Energy Technology Data Exchange (ETDEWEB)

Wilson, J G [Australian Atomic Energy Commission Research Establishment, Lucas Heights

1982-09-01

Work on the synthesis of ligands capable of forming chelate complexes with technetium-99m as part of a search for tumour-localising radiopharmaceuticals is described. An account of the biological evaluation of a range of these compounds, in particular, benzimidazoles, sulphanilamides and acridines, and of the investigation of certain biochemical and biological properties affecting the clinical application of both ligands and radiopharmaceuticals is given. Interactions between therapeutic drugs and diagnostic radiopharmaceuticals are considered. The toxicological evaluation of a prospective hepatobiliary imaging agent, dimethyl-BIMIDA, is described.

Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

Evaluation of COTS SiGe, SOI, and Mixed Signal Electronic Parts for Extreme Temperature Use in NASA Missions

Science.gov (United States)

Patterson, Richard L.; Hammoud, Ahmad

2010-01-01

The NASA Electronic Parts and Packaging (NEPP) Program sponsors a task at the NASA Glenn Research Center titled "Reliability of SiGe, SOI, and Advanced Mixed Signal Devices for Cryogenic Space Missions." In this task COTS parts and flight-like are evaluated by determining their performance under extreme temperatures and thermal cycling. The results from the evaluations are published on the NEPP website and at professional conferences in order to disseminate information to mission planners and system designers. This presentation discusses the task and the 2010 highlights and technical results. Topics include extreme temperature operation of SiGe and SOI devices, all-silicon oscillators, a floating gate voltage reference, a MEMS oscillator, extreme temperature resistors and capacitors, and a high temperature silicon operational amplifier.

The scope of costs in alcohol studies: Cost-of-illness studies differ from economic evaluations

Directory of Open Access Journals (Sweden)

Tariq Luqman

2010-07-01

Full Text Available Abstract Background Alcohol abuse results in problems on various levels in society. In terms of health, alcohol abuse is not only an important risk factor for chronic disease, but it is also related to injuries. Social harms which can be related to drinking include interpersonal problems, work problems, violent and other crimes. The scope of societal costs related to alcohol abuse in principle should be the same for both economic evaluations and cost-of-illness studies. In general, economic evaluations report a small part of all societal costs. To determine the cost- effectiveness of an intervention it is necessary that all costs and benefits are included. The purpose of this study is to describe and quantify the difference in societal costs incorporated in economic evaluations and cost-of-illness studies on alcohol abuse. Method To investigate the economic costs attributable to alcohol in cost-of-illness studies we used the results of a recent systematic review (June 2009. We performed a PubMed search to identify economic evaluations on alcohol interventions. Only economic evaluations in which two or more interventions were compared from a societal perspective were included. The proportion of health care costs and the proportion of societal costs were estimated in both type of studies. Results The proportion of healthcare costs in cost-of-illness studies was 17% and the proportion of societal costs 83%. In economic evaluations, the proportion of healthcare costs was 57%, and the proportion of societal costs was 43%. Conclusions The costs included in economic evaluations performed from a societal perspective do not correspond with those included in cost-of-illness studies. Economic evaluations on alcohol abuse underreport true societal cost of alcohol abuse. When considering implementation of alcohol abuse interventions, policy makers should take into account that economic evaluations from the societal perspective might underestimate the total

Towards an empirical method of usability testing of system parts : a methodological study

NARCIS (Netherlands)

Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.

2007-01-01

Current usability evaluation methods are essentially holistic in nature. However, engineers that apply a component-based software engineering approach might also be interested in understanding the usability of individual parts of an interactive system. This paper examines the efficiency dimension of

Use of Computer Simulation in Designing and Evaluating a Proposed Rough Mill for Furniture Interior Parts

Science.gov (United States)

Philip A. Araman

1977-01-01

The design of a rough mill for the production of interior furniture parts is used to illustrate a simulation technique for analyzing and evaluating established and proposed sequential production systems. Distributions representing the real-world random characteristics of lumber, equipment feed speeds and delay times are programmed into the simulation. An example is...

Integrating CHWs as Part of the Team Leading Diabetes Group Visits: A Randomized Controlled Feasibility Study.

Science.gov (United States)

Vaughan, Elizabeth M; Johnston, Craig A; Cardenas, Victor J; Moreno, Jennette P; Foreyt, John P

2017-12-01

Purpose The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. Methods This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n = 50). Group visits met for 3 hours each month for a 6-month duration. Main measures included baseline and 6-month clinical outcomes (ie, A1C, lipids), concordance with 8 standard of care guidelines (ie, screens for cervical, breast, and colon cancer) from the US Preventive Task Force and American Diabetes Association, and participant acceptability. Results Compared to control participants, the intervention group resulted in significantly better clinical outcomes or guideline concordance for the following areas: target A1C levels, retinal eye exams, diabetes foot exams, mammograms, and urine microalbumin. Significantly more individuals in the control group gained weight, whereas a greater number of participants in the intervention group lost weight. Intervention participants found the group visits highly acceptable. Conclusions Integrating CHWs as part a comprehensive diabetes group visit program is a feasible and effective system-level intervention to improve glycemic control and achieve guideline concordance.

Comparative study of open and arthroscopic coracoid transfer for shoulder anterior instability (Latarjet)-computed tomography evaluation at a short term follow-up. Part II.

Science.gov (United States)

Kordasiewicz, Bartłomiej; Kicinski, Maciej; Małachowski, Konrad; Wieczorek, Janusz; Chaberek, Sławomir; Pomianowski, Stanisław

2018-05-01

The aim of this study was to evaluate and to compare the radiological parameters after arthroscopic and open Latarjet technique via evaluation of computed tomography (CT) scans. Our hypothesis was that the radiological results after arthroscopic stabilisation remained in the proximity of those results achieved after open stabilisation. CT scan evaluation results of patients after primary Latarjet procedure were analysed. Patients operated on between 2006 and 2011 using an open technique composed the OPEN group and patients operated on arthroscopically between 2011 and 2013 composed the ARTHRO group. Forty-three out of 55 shoulders (78.2%) in OPEN and 62 out of 64 shoulders (95.3%) in ARTHRO were available for CT scan evaluation. The average age at surgery was 28 years in OPEN and 26 years in ARTHRO. The mean follow-up was 54.2 months in OPEN and 23.4 months in ARTHRO. CT scan evaluation was used to assess graft fusion and osteolysis. Bone block position and screw orientation were assessed in the axial and the sagittal views. The subscapularis muscle fatty infiltration was evaluated according to Goutallier classification. The non-union rate was significantly higher in OPEN than in ARTHRO: 5 (11.9%) versus 1 (1.7%) (p OPEN group: five cases (11.9%) versus zero in ARTHRO (p OPEN group (p > 0.05). These results should be evaluated very carefully due to significant difference in the follow-up of both groups. A significantly higher rate of partial graft osteolysis at the level of the superior screw was reported in ARTHRO with 32 patients (53.3%) versus 10 (23.8%) in OPEN (p OPEN had the coracoid bone block in an acceptable position (between 4 mm medially and 2 mm laterally). In the sagittal plane, the bone block was in an acceptable position between 2 and 5 o'clock in 86.7% of patients in ARTHRO and 90.2% in OPEN (p > 0.05). However, in the position between 3 and 5 o'clock there were 56.7% of the grafts in ARTHRO versus 87.8% in OPEN (p OPEN group

Residual Stress Analysis of Aircraft Part using Neutron Beam

Energy Technology Data Exchange (ETDEWEB)

Shin, Eun Joo; Seong, Baek Seok; Sim, Cheul Muu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

A precise measurement of the residual stress magnitude and distribution is an important factor to evaluate the lifetime or safety of the materials, because the residual stress affects the material properties, such as the strength, fatigue, etc. In the case of a fighter jet, the lifetime and safety of the parts of the landing gear are more important than that of a passenger airplane because of its frequent take offs and landings. In particular in the case of training a fighter jet, a precise evaluation of life time for the parts of the landing gear is strongly required for economic reason. In this study, the residual stress of a part of the landing gear of the training fighter jet which is used to fix the landing gear to the aircraft body was investigated. The part was used for 2000 hours of flight, which corresponds to 10 years. During this period, the fighter jet normally takes off and lands more than 2000 times. These frequent take off and landing can generate residual stress and cause a crack in the part. By measuring the neutron diffraction peaks, we evaluated the residual stress of the landing gear part

An Evaluative Study of an ICT Module for a School Leadership and Management Preparation Program

Science.gov (United States)

Musgrave, Sarietjie; De Wet, Corene

2017-01-01

This study reports on findings of an evaluative study on the effectiveness of an information and communication technology (ICT) module that forms part of the Advanced Certificate in Education: School Leadership and Management program. The study was carried out among distance education (DE) students from the University of the Free State enrolled…

Study on dilatation of multi-criteria evaluation method (II)

International Nuclear Information System (INIS)

Tabaru, Yasuhiko; Tomizawa, Masao; Sasaki, Shigeo

2003-01-01

In the study on FBR-cycle practical application strategy conducted by JNC, as part of development of evaluation system aiming at comparative evaluation of promising concept for FBR-cycle system, they grade the value of the concepts under the criteria evaluation such as economical efficiency and environmental load. In order that this system functions effectively in selecting promising concepts, we believe that it is important to extend the range of criteria evaluation and improve objectivity and persuasiveness of it. This is why since the last fiscal year we have been studying on evaluation methodology of and investigation examples on external economical efficiency (effects on the environment and human health, safety, energy security, nuclear non-proliferation, etc.) relevant to introduction of FBR, which had not been included in the conventional evaluation of economical efficiency. In this work, we have especially focused on the external economical efficiency relevant to energy security which is peculiar to FBR-cycle and studied on its evaluation methodology and investigation examples. Firstly, we summarized up on the concept and current situation of energy security and the position of nuclear energy in energy security. Then we identified the necessity of clarifying the importance of energy security with the middle-term point of view allowing for deficiency of fossil or uranium resources, and also the importance of the role of FBR as an improvement action for it. Secondly, we studied on the current energy economic model and examined the possibility of applying energy security for quantitative evaluation. As a result, we have concluded that the general equilibrium GTAP (Global Trade Analysis Project) in which fossil resource market around the world is modeled should be effective for quantitative evaluation of long term energy security. Finally, assuming that we will conduct the quantitative evaluation of long term energy security using GTAP model in the future, we

Evaluation of pump pulsation in respirable size-selective sampling: part II. Changes in sampling efficiency.

Science.gov (United States)

Lee, Eun Gyung; Lee, Taekhee; Kim, Seung Won; Lee, Larry; Flemmer, Michael M; Harper, Martin

2014-01-01

This second, and concluding, part of this study evaluated changes in sampling efficiency of respirable size-selective samplers due to air pulsations generated by the selected personal sampling pumps characterized in Part I (Lee E, Lee L, Möhlmann C et al. Evaluation of pump pulsation in respirable size-selective sampling: Part I. Pulsation measurements. Ann Occup Hyg 2013). Nine particle sizes of monodisperse ammonium fluorescein (from 1 to 9 μm mass median aerodynamic diameter) were generated individually by a vibrating orifice aerosol generator from dilute solutions of fluorescein in aqueous ammonia and then injected into an environmental chamber. To collect these particles, 10-mm nylon cyclones, also known as Dorr-Oliver (DO) cyclones, were used with five medium volumetric flow rate pumps. Those were the Apex IS, HFS513, GilAir5, Elite5, and Basic5 pumps, which were found in Part I to generate pulsations of 5% (the lowest), 25%, 30%, 56%, and 70% (the highest), respectively. GK2.69 cyclones were used with the Legacy [pump pulsation (PP) = 15%] and Elite12 (PP = 41%) pumps for collection at high flows. The DO cyclone was also used to evaluate changes in sampling efficiency due to pulse shape. The HFS513 pump, which generates a more complex pulse shape, was compared to a single sine wave fluctuation generated by a piston. The luminescent intensity of the fluorescein extracted from each sample was measured with a luminescence spectrometer. Sampling efficiencies were obtained by dividing the intensity of the fluorescein extracted from the filter placed in a cyclone with the intensity obtained from the filter used with a sharp-edged reference sampler. Then, sampling efficiency curves were generated using a sigmoid function with three parameters and each sampling efficiency curve was compared to that of the reference cyclone by constructing bias maps. In general, no change in sampling efficiency (bias under ±10%) was observed until pulsations exceeded 25% for the

Design study on dose evaluation method for employees at severe accident

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Yoshitaka; Irie, Takashi; Kohriyama, Tamio [Institute of Nuclear Safety Systems Inc., Mihama, Fukui (Japan); Kudo, Seiichi [Mitsubishi Heavy Industries Ltd., Tokyo (Japan); Nishimura, Kazuya [Computer Software Development Co., Ltd., Tokyo (Japan)

2001-09-01

When we assume a severe accident in a nuclear power plant, it is required for rescue activity in the plant, accident management, repair work of failed parts and evaluation of employees to obtain radiation dose rate distribution or map in the plant and estimated dose value for the above works. However it might be difficult to obtain them accurately along the progress of the accident, because radiation monitors are not always installed in the areas where the accident management is planned or the repair work is thought for safety-related equipments. In this work, we analyzed diffusion of radioactive materials in case of a severe accident in a pressurized water reactor plant, investigated a method to obtain radiation dose rate in the plant from estimated radioactive sources, made up a prototype analyzing system by modeling a specific part of components and buildings in the plant from this design study on dose evaluation method for employees at severe accident, and then evaluated its availability. As a result, we obtained the followings: (1) A new dose evaluation method was established to predict the radiation dose rate in any point in the plant during a severe accident scenario. (2) This evaluation of total dose including moving route and time for the accident management and the repair work is useful for estimating radiation dose limit for these actions of the employees. (3) The radiation dose rate map is effective for identifying high radiation areas and for choosing a route with lower radiation dose rate. (author)

Design study on dose evaluation method for employees at severe accident

International Nuclear Information System (INIS)

Yoshida, Yoshitaka; Irie, Takashi; Kohriyama, Tamio; Kudo, Seiichi; Nishimura, Kazuya

2001-01-01

When we assume a severe accident in a nuclear power plant, it is required for rescue activity in the plant, accident management, repair work of failed parts and evaluation of employees to obtain radiation dose rate distribution or map in the plant and estimated dose value for the above works. However it might be difficult to obtain them accurately along the progress of the accident, because radiation monitors are not always installed in the areas where the accident management is planned or the repair work is thought for safety-related equipments. In this work, we analyzed diffusion of radioactive materials in case of a severe accident in a pressurized water reactor plant, investigated a method to obtain radiation dose rate in the plant from estimated radioactive sources, made up a prototype analyzing system by modeling a specific part of components and buildings in the plant from this design study on dose evaluation method for employees at severe accident, and then evaluated its availability. As a result, we obtained the followings: (1) A new dose evaluation method was established to predict the radiation dose rate in any point in the plant during a severe accident scenario. (2) This evaluation of total dose including moving route and time for the accident management and the repair work is useful for estimating radiation dose limit for these actions of the employees. (3) The radiation dose rate map is effective for identifying high radiation areas and for choosing a route with lower radiation dose rate. (author)

Characterization of PLA parts made with AM process

Science.gov (United States)

Spina, Roberto; Cavalcante, Bruno; Lavecchia, Fulvio

2018-05-01

The main objective of the presented work is to evaluate the thermal behavior of Poly-lactic acid (PLA) parts made with a Fused Deposition Modelling (FDM) process. By using a robust framework for the testing sequence of PLA parts, with the aim of establishing a standard testing cycle for the optimization of the part performance and quality. The research involves study the materials before and after 3D printing. Two biodegradable PLA polymers are investigated, characterized by different colors (one black and the other transparent). The study starts with the examination of each polymeric material and measurements of its main thermal properties.

Electric utility engineer`s FGD manual -- Volume 2: Major mechanical equipment; FGD proposal evaluations; Use of FGDPRISM in FGD system modification, proposal, evaluation, and design; FGD system case study. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-04

Part 2 of this manual provides the electric utility engineer with detailed technical information on some of the major mechanical equipment used in the FGD system. The objectives of Part 2 are the following: to provide the electric utility engineer with information on equipment that may be unfamiliar to him, including ball mills, vacuum filters, and mist eliminators; and to identify the unique technique considerations imposed by an FGD system on more familiar electric utility equipment such as fans, gas dampers, piping, valves, and pumps. Part 3 provides an overview of the recommended procedures for evaluating proposals received from FGD system vendors. The objectives are to provide procedures for evaluating the technical aspects of proposals, and to provide procedures for determining the total costs of proposals considering both initial capital costs and annual operating and maintenance costs. The primary objective of Part 4 of this manual is to provide the utility engineer who has a special interest in the capabilities of FGDPRISM [Flue Gas Desulfurization PRocess Integration and Simulation Model] with more detailed discussions of its uses, requirements, and limitations. Part 5 is a case study in using this manual in the preparation of a purchase specification and in the evaluation of proposals received from vendors. The objectives are to demonstrate how the information contained in Parts 1 and 2 can be used to improve the technical content of an FGD system purchase specification; to demonstrate how the techniques presented in Part 3 can be used to evaluate proposals received in response to the purchase specification; and to illustrate how the FGDPRISM computer program can be used to establish design parameters for the specification and evaluate vendor designs.

Can text messages reach the parts other process measures cannot reach: an evaluation of a behavior change intervention delivered by mobile phone?

Directory of Open Access Journals (Sweden)

Linda Irvine

Full Text Available BACKGROUND: Process evaluation is essential in developing, piloting and evaluating complex interventions. This often involves observation of intervention delivery and interviews with study participants. Mobile telephone interventions involve no face to face contact, making conventional process evaluation difficult. This study assesses the utility of novel techniques for process evaluation involving no face to face contact. METHODS: Text messages were delivered to 34 disadvantaged men as part of a feasibility study of a brief alcohol intervention. Process evaluation focused on delivery of the text messages and responses received from study participants. The computerized delivery system captured data on receipt of the messages. The text messages, delivered over 28 days, included nine which asked questions. Responses to these questions served as one technique for process evaluation by ascertaining the nature of engagement with the study and with steps on the causal chain to behavior change. RESULTS: A total of 646 SMS text messages were sent to participants. Of these, 613 messages (95% were recorded as delivered to participants' telephones. 88% of participants responded to messages that asked questions. There was little attenuation in responses to the questions across the intervention period. Content analysis of the responses revealed that participants engaged with text messages, thought deeply about their content and provided carefully considered personal responses to the questions. CONCLUSIONS: Socially disadvantaged men, a hard to reach population, engaged in a meaningful way over a sustained period with an interactive intervention delivered by text message. The novel process measures used in the study are unobtrusive, low cost and collect real-time data on all participants. They assessed the fidelity of delivery of the intervention and monitored retention in the study. They measured levels of engagement and identified participants' reactions to

Application of radiobiological techniques in studying antioxidant mechanisms: evaluation of their radioprotective, antioxidative and antiviral activities

International Nuclear Information System (INIS)

Hmamouchi, M.

2000-01-01

In the medical field, the oxidation phenomenon is the source of several pathologies (diabetes, cystic fibrosis, cancers,...). The natural oxidants are used as food preserving and skin ageing moderators. Several plant extracts with antioxidant activity were studied, this important antioxidant activity is probably due to their richness of compounds: polyphenols, phenolic acids, tocopherols, carotenoids, flavonoids,... Many techniques for evaluation and reactional mechanism study of the antioxidative activity are used. After selection, extraction, fractionation, activity screening, chemical analyses of molecules contained in the best active extracts, biological properties research of isolated redox pharmacophore, we have : - determined the structure of active products by spectroscopy and chromatography; - studied the antioxidative properties by EPR and spin trapping of the obtained extracts and molecules. The results of this first part of our work consists in evaluating the antioxidative degree of a great number of natural active principles, extracted from moroccan plants and pur obtained products. The second part consists in studying the action mechanisms using the LDL labelling (F. M.)

An evaluation of the hemiplegic subject based on the Bobath approach. Part III. A validation study.

Science.gov (United States)

Arsenault, A B; Dutil, E; Lambert, J; Corriveau, H; Guarna, F; Drouin, G

1988-01-01

Sixty-two hemiplegic subjects were treated with the Bobath approach for a period of three months. During this time they were evaluated on three occasions. The testing battery consisted of a Bobath evaluation, the Brunnstrom scale, the Fugl-Meyer test, the Upper Extremity Functional Test (UEFT) and the Present Pain Intensity (PPI) of the McGill pain questionnaire. A Friedman analysis of variance showed that, except for pain, all the protocols used disclosed significant progress (p less than 0.001) over time in terms of motor recovery. Except for pain, the results of the Bobath evaluation were significantly correlated (Spearman's Rho, p less than 0.001) with the results of the other testing procedures. It is concluded that the new Bobath evaluation proposed in a previous paper is as sensitive in depicting progress in motor recovery over time as are the other testing procedures used. Furthermore, this new evaluation seems to be measuring similar properties to the other tests. However, pain (PPI) appears not to be an important dependent variable.

Hypotheses and fundamental study design characteristics for evaluating potential reduced-risk tobacco products. Part I: Heuristic.

Science.gov (United States)

Murrelle, Lenn; Coggins, Christopher R E; Gennings, Chris; Carchman, Richard A; Carter, Walter H; Davies, Bruce D; Krauss, Marc R; Lee, Peter N; Schleef, Raymond R; Zedler, Barbara K; Heidbreder, Christian

2010-06-01

The risk-reducing effect of a potential reduced-risk tobacco product (PRRP) can be investigated conceptually in a long-term, prospective study of disease risks among cigarette smokers who switch to a PRRP and in appropriate comparison groups. Our objective was to provide guidance for establishing the fundamental design characteristics of a study intended to (1) determine if switching to a PRRP reduces the risk of lung cancer (LC) compared with continued cigarette smoking, and (2) compare, using a non-inferiority approach, the reduction in LC risk among smokers who switched to a PRRP to the reduction in risk among smokers who quit smoking entirely. Using standard statistical methods applied to published data on LC incidence after smoking cessation, we show that the sample size and duration required for a study designed to evaluate the potential for LC risk reduction for an already marketed PRRP, compared with continued smoking, varies depending on the LC risk-reducing effectiveness of the PRRP, from a 5-year study with 8000-30,000 subjects to a 15-year study with <5000 to 10,000 subjects. To assess non-inferiority to quitting, the required sample size tends to be about 10 times greater, again depending on the effectiveness of the PRRP. (c) 2009 Elsevier Inc. All rights reserved.

Study on team evaluation (4). Reliability and validity of questionnaire survey-based team work evaluation method of power plant operator team

International Nuclear Information System (INIS)

Sasou, Kunihide; Hirose, Ayako; Misawa, Ryou; Yamaguchi, Hiroyuki

2006-01-01

The series of this study describes the necessity of the evaluation of team work from two aspects of operator's behavior and operators' mind. The authors propose Team Work Element Model which consists of necessary elements to build high performance team. This report discusses a method to evaluate team work from the second aspect, that is, competency trust, competition, for-the team spirit, etc. The authors survey the previous studies on psychological measures and organize a set of questions to evaluate 10 team work sub elements that are the parts of Team Work Element Model. The factor analysis shows that this set of questions is consists of 13 factors such as task-oriented leadership, harmony-oriented team atmosphere, etc. Close examination of the questions in each factor shows that 8 of 10 team work sub elements can be evaluated by this questionnaire. In addition, this questionnaire comprises scales additional 8 scales such as job satisfaction, leadership, etc. As a result, it is possible to evaluate team work from more comprehensive view points. (author)

Stress among part-time business students: a study in a Ghanaian ...

African Journals Online (AJOL)

Stress among part-time business students: a study in a Ghanaian univeristy campus. ... students among part-time business students in a Ghanaian university. ... in other areas of life in order to concentrate more on their jobs and schooling.

Participant evaluation results for two indoor air quality studies

International Nuclear Information System (INIS)

Hawthorne, A.R.; Dudney, C.S.; Cohen, M.A.; Spengler, J.D.

1987-01-01

After two surveys for indoor air pollutants (radon and other chemicals) the homeowners were surveyed for their reactions. The results of these participant evaluation surveys, assuming that the participants that responded to the survey were representative, indicate that homeowners will accept a significant level of monitoring activity as part of an indoor air quality field study. Those participants completing surveys overwhelmingly enjoyed being in the studies and would do it again. We believe that the emphasis placed on positive homeowner interactions and efforts made to inform participants throughout our studies were positive factors in this result. There was no substantial differences noted in the responses between the 70-house study, which included a homeowner compensation payment of $100, and the 300-house study, which did not include a compensation payment. These results provide encouragement to conduct future complex, multipollutant indoor air quality studies when they are scientifically sound and cost effective

Study protocol: quantitative fibronectin to help decision-making in women with symptoms of preterm labour (QUIDS) part 2, UK Prospective Cohort Study

Science.gov (United States)

Wotherspoon, Lisa M; Boyd, Kathleen Anne; Morris, Rachel K; Jackson, Lesley; Chandiramani, Manju; David, Anna L; Khalil, Asma; Shennan, Andrew; Hodgetts Morton, Victoria; Lavender, Tina; Khan, Khalid; Harper-Clarke, Susan; Mol, Ben; Riley, Richard D; Norrie, John; Norman, Jane

2018-01-01

Introduction The aim of the QUIDS study is to develop a decision support tool for the management of women with symptoms and signs of preterm labour, based on a validated prognostic model using quantitative fetal fibronectin (fFN) concentration, in combination with clinical risk factors. Methods and analysis The study will evaluate the Rapid fFN 10Q System (Hologic, Marlborough, Massachusetts, USA) which quantifies fFN in a vaginal swab. In QUIDS part 2, we will perform a prospective cohort study in at least eight UK consultant-led maternity units, in women with symptoms of preterm labour at 22+0 to 34+6 weeks gestation to externally validate a prognostic model developed in QUIDS part 1. The effects of quantitative fFN on anxiety will be assessed, and acceptability of the test and prognostic model will be evaluated in a subgroup of women and clinicians (n=30). The sample size is 1600 women (with estimated 96–192 events of preterm delivery within 7 days of testing). Clinicians will be informed of the qualitative fFN result (positive/negative) but be blinded to quantitative fFN result. Research midwives will collect outcome data from the maternal and neonatal clinical records. The final validated prognostic model will be presented as a mobile or web-based application. Ethics and dissemination The study is funded by the National Institute of Healthcare Research Health Technology Assessment (HTA 14/32/01). It has been approved by the West of Scotland Research Ethics Committee (16/WS/0068). Version Protocol V.2, Date 1 November 2016. Trial registration number ISRCTN41598423 and CPMS: 31277. PMID:29674373

Learning from Action Evaluation of the Use of Multimedia Case Studies in Management Information Systems Courses

Science.gov (United States)

Kawulich, Barbara B.

2011-01-01

This manuscript shares lessons learned from conducting an action evaluation of the use of multimedia case studies in Management Information Systems (MIS) courses. Three undergraduate MIS classes took part in the study. The purpose for using case studies in these classes was to teach students about the role of MIS in business. An action evaluation…

Library Evaluation and Organizational Learning: A Questionnaire Study

Science.gov (United States)

Chen, Kuan-Nien

2006-01-01

This article focuses on organizational learning, particularly in the context of evaluation and organizational change. These concepts are discussed in terms of academic libraries. As part of this discussion, a model entitled Processes and Phases of Organizational Learning (PPOL) was developed which is a visual representation of the range of…

Conduct of a meta review of programme evaluations : a case study of the SEARCH Program

OpenAIRE

Dickson, Rumona; Tight, Malcolm; Saunders, Murray

2012-01-01

This thesis presents a retrospective case study that critically examines the evaluations that were undertaken as part of a continuing professional development (CPD) programme for health care professionals. The case is the SEARCH Program, an innovative CPD programme, which was designed to promote the implementation of evidence based practice (EBP) within the existing health care system in Alberta, Canada. Two approaches from the ‘using’ branch of Alkin and Chrisite’s evaluation theory tree are...

A Systematic Approach for Evaluating BPM Systems: Case Studies on Open Source and Proprietary Tools

OpenAIRE

Delgado , Andrea; Calegari , Daniel; Milanese , Pablo; Falcon , Renatta; García , Esteban

2015-01-01

Part 3: Examples and Case Studies; International audience; Business Process Management Systems (BPMS) provide support for modeling, developing, deploying, executing and evaluating business processes in an organization. Selecting a BPMS is not a trivial task, not only due to the many existing alternatives, both in the open source and proprietary realms, but also because it requires a thorough evaluation of its capabilities, contextualizing them in the organizational environment in which they w...

Nevada Test Site probable maximum flood study, part of US Geological Survey flood potential and debris hazard study, Yucca Mountain Site for US Department of Energy, Office of Civilian Radioactive Waste Management

International Nuclear Information System (INIS)

Bullard, K.L.

1994-01-01

The US Geological Survey (USGS), as part of the Yucca Mountain Project (YMP), is conducting studies at Yucca Mountain, Nevada. The purposes of these studies are to provide hydrologic and geologic information to evaluate the suitability of Yucca Mountain for development as a high-level nuclear waste repository, and to evaluate the ability of the mined geologic disposal system (MGDS) to isolate the waste in compliance with regulatory requirements. In particular, the project is designed to acquire information necessary for the Department of Energy (DOE) to demonstrate in its environmental impact statement (EIS) and license application whether the MGDS will meet the requirements of federal regulations 10 CFR Part 60, 10 CFR Part 960, and 40 CFR Part 191. Complete study plans for this part of the project were prepared by the USGS and approved by the DOE in August and September of 1990. The US Bureau of Reclamation (Reclamation) was selected by the USGS as a contractor to provide probable maximum flood (PMF) magnitudes and associated inundation maps for preliminary engineering design of the surface facilities at Yucca Mountain. These PMF peak flow estimates are necessary for successful waste repository design and construction. The PMF technique was chosen for two reasons: (1) this technique complies with ANSI requirements that PMF technology be used in the design of nuclear related facilities (ANSI/ANS, 1981), and (2) the PMF analysis has become a commonly used technology to predict a ''worst possible case'' flood scenario. For this PMF study, probable maximum precipitation (PMP) values were obtained for a local storm (thunderstorm) PMP event. These values were determined from the National Weather Services's Hydrometeorological Report No. 49 (HMR 49)

The Benefits of Part-Time Undergraduate Study and UK Higher Education Policy: A Literature Review

Science.gov (United States)

Bennion, Alice; Scesa, Anna; Williams, Ruth

2011-01-01

Part-time study in the UK is significant: nearly 40 per cent of higher education students study part-time. This article reports on a literature review that sought to understand the economic and social benefits of part-time study in the UK. It concludes that there are substantial and wide-ranging benefits from studying part-time. The article also…

Biological characteristics as a part of pollution monitoring studies

Digital Repository Service at National Institute of Oceanography (India)

Nair, V.R.; Govindan, K.

Ecosystem modifications can be considered as an integral part of any pollution monitoring studies and in such cases community structure/diversity is of prime importance. Considering this advantage of aquatic life, pelagic and benthic communities...

Development of resilience evaluation method for nuclear power plants. Part 3. Study of evaluation method and applicability of resilience index

International Nuclear Information System (INIS)

Suzuki, Masaaki; Demachi, Kazuyuki; Miyano, Hiroshi

2017-01-01

We have developed a new index, called the resilience index, that evaluates the dynamic stability of the system safety of a nuclear power plant during a severe accident by considering the ability to recover system safety functions that have become lost in the situation. In this paper, a detailed evaluation procedure for the resilience index is described. The system safety of a pressurized water reactor plant during a severe accident is then assessed according to the resilience index in order to discuss the applicability of the index. We find that the resilience index successfully represents management capability and, therefore, the resilience capability of a nuclear power plant. (author)

Development of resilience evaluation method for nuclear power plants. Part 3. Study on evaluation method and applicability of resilience index

International Nuclear Information System (INIS)

Suzuki, Masaaki; Demachi, Kazuyuki; Murakami, Kenta

2016-01-01

We have developed a new index, called the resilience index, that evaluates the dynamic stability of the system safety of a nuclear power plant during a severe accident by considering the ability to recover system safety functions that have become lost in the situation. In this paper, a detailed evaluation procedure for the resilience index is described. The system safety of a PWR plant during a severe accident is then assessed according to the resilience index in order to discuss the applicability of the index. We find that the resilience index successfully represents management capability and, therefore, the resilience capability of a nuclear power plant. (author)

Anti-diabetic potential of aerial parts of Galium tricornutum (Dandy ...

African Journals Online (AJOL)

Purpose: To evaluate the anti-diabetic potential of methanol extract of the aerial parts of Galium tricornutum (Dandy) in diabetic rats. Methods: The methanol extract of the aerial parts of Galium tricornutum was first subjected to acute toxicity studies. Thereafter, the effect of the extract on oral glucose tolerance was determined ...

Becoming Academics: Experiencing Legitimate Peripheral Participation in Part-Time Doctoral Studies

Science.gov (United States)

Teeuwsen, Phil; Ratkovic, Snežana; Tilley, Susan A.

2014-01-01

An important element of doctoral studies is identification with the academic community. Such identification is often complicated by part-time student status. In this paper, two part-time doctoral students and their supervisor employ Lave and Wenger's concept of legitimate peripheral participation to explore, through a critical socio-cultural lens,…

The Invisible Student: Benefits and Challenges of Part-Time Doctoral Studies

Science.gov (United States)

Bates, Peter; Goff, Lori

2012-01-01

This autoethnographic study explores the experiences of two part-time doctoral students as we document our journey of balancing our multiple competing roles. As we reflected and consulted the literature, we began to identify many benefits and challenges that part-time candidature brings to students, universities and employers. Through our…

Evaluation of swimming capability and potential velocity barrier problems for fish. Part B: New telemetric approaches to the assessment of fish swimming performance

International Nuclear Information System (INIS)

Scruton, D. A.; Goosney, R. G.; McKinley, R. S.; Booth, R. K.; Colavecchia, M.

1998-08-01

This report represents the second part of a study undertaken to develop information related to swimming capability of several important fish species. The study will provide biological design criteria to mitigate potential velocity barrier problems associated with hydroelectric power plants. This part of the report focuses on the development and evaluation of approaches to assessing locomotory activity, swimming performance and energy load costs to fish under naturally occurring conditions and in relation to potential barriers. The study involved implantation of a bio-sensitive radio transmitter (electromyogram (EMG)) tag in the swimming muscle of fish, calibration of locomotory ability and energetic scope, and subsequent use of EMG signals to assess swimming performance and metabolic costs in situ. Digital signal processing (DSP) with antennae switching was also used to study high speed swimming performance, behaviour, and migratory strategy in relation to ascent of an experimental flume. The techniques and technologies developed indicate the complexity of factors that regulate fish swimming energy expenditure that need to be considered in the design and operation of fish passage facilities. 84 refs., 6 tabs., figs., 2 appendices

International Uranium Resources Evaluation Project (IUREP) national favourability studies: Austria

International Nuclear Information System (INIS)

1977-10-01

The Federal Republic of Austria is situated in the southeastern part of Central Europe. The country covers a total area of 83.350 square kilometers, the population amounts to 7.5 million inhabitants. The geographical features of Austria are dominated by the E-W-trending chain of the Alps (approximately 60% of the country). The northeastern part of the country is formed by the nonalpine mountains and hills of the Bohemian Massif. There are a large depression, the basin of Vienna, as well as parts of the Pannonian basin in the eastern part. The main hydrographic features are characterized by the river Danube and its tributaries. With the exception of a small part in the west of the country, the drainage system of which is directed to the river Rhine, all other rivers are drained by the Danube. The elevations in the Alps reach heights of up to 3 800 m. Many of the E-W striking mountain chains are higher than 2000 to 2500 m. Several major N-S trending passes over the mountains are favourable for the transportation systems (railroads, motorroads) - The kind of land use in Austria is mainly determined by the character of the landscape which is made up of mountains and valleys as well as of depressions in the eastern part of the country. In the lowlands, good farmland is available. At lower and at medium elevations, forests and grassland predominate in the Alps. At higher elevations, the Alps are covered with grasslands; a great part of the rocks has no soil cover, another part is covered by perennial snow and ice.The presence of many uranium occurrences in the Permo-Triassic sediments justifies a detailed survey of these strata. Special studies on the lithology and the formation of uranium in these rocks have been made during the last few years. They should be evaluated to point out new favourable prospective areas. The potential of Uranium which is assumed to be found in Austria is 10,000 - 50,000 t U

Morphometric studies on a part of Central Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Kodagali, V.N.

Morphometric and slope angle studies carried out on a part of Indian Ocean Basin have shown that gentle slope angle ranges dominate, 92% of the area represented by 0-3 degrees slopes. Young's hypothesis of log-normal distribution of slope angle...

Ethics reflection groups in community health services: an evaluation study.

Science.gov (United States)

Lillemoen, Lillian; Pedersen, Reidar

2015-04-17

Systematic ethics support in community health services in Norway is in the initial phase. There are few evaluation studies about the significance of ethics reflection on care. The aim of this study was to evaluate systematic ethics reflection in groups in community health (including nursing homes and residency), - from the perspectives of employees participating in the groups, the group facilitators and the service managers. The reflection groups were implemented as part of a research and development project. A mixed-methods design with qualitative focus group interviews, observations and written reports were used to evaluate. The study was conducted at two nursing homes, two home care districts and a residence for people with learning disabilities. Participants were employees, facilitators and service managers. The study was guided by ethical standard principles and was approved by the Norwegian Social Science Data Services. We found support for ethics reflection as a valuable measure to strengthen clinical practice. New and improved solutions, more cooperation between employees, and improved collaboration with patients and their families are some of the results. No negative experiences were found. Instead, the ethics reflection based on experiences and challenges in the workplace, was described as a win-win situation. The evaluation also revealed what is needed to succeed and useful tips for further development of ethics support in community health services. Ethics reflection groups focusing on ethical challenges from the participants' daily work were found to be significant for improved practice, collegial support and cooperation, personal and professional development among staff, facilitators and managers. Resources needed to succeed were managerial support, and anchoring ethics sessions in the routine of daily work.

Evaluating care from a care ethical perspective:: A pilot study.

Science.gov (United States)

Kuis, Esther E; Goossensen, Anne

2017-08-01

Care ethical theories provide an excellent opening for evaluation of healthcare practices since searching for (moments of) good care from a moral perspective is central to care ethics. However, a fruitful way to translate care ethical insights into measurable criteria and how to measure these criteria has as yet been unexplored: this study describes one of the first attempts. To investigate whether the emotional touchpoint method is suitable for evaluating care from a care ethical perspective. An adapted version of the emotional touchpoint interview method was used. Touchpoints represent the key moments to the experience of receiving care, where the patient recalls being touched emotionally or cognitively. Participants and research context: Interviews were conducted at three different care settings: a hospital, mental healthcare institution and care facility for older people. A total of 31 participants (29 patients and 2 relatives) took part in the study. Ethical considerations: The research was found not to be subject to the (Dutch) Medical Research Involving Human Subjects Act. A three-step care ethical evaluation model was developed and described using two touchpoints as examples. A focus group meeting showed that the method was considered of great value for partaking institutions in comparison with existing methods. Reflection and discussion: Considering existing methods to evaluate quality of care, the touchpoint method belongs to the category of instruments which evaluate the patient experience. The touchpoint method distinguishes itself because no pre-defined categories are used but the values of patients are followed, which is an essential issue from a care ethical perspective. The method portrays the insider perspective of patients and thereby contributes to humanizing care. The touchpoint method is a valuable instrument for evaluating care; it generates evaluation data about the core care ethical principle of responsiveness.

Method for evaluating the system instrumentation for loose part detection in the primary cooling circuit of French PWRs

International Nuclear Information System (INIS)

Gerardin, J.P.; Donnette, J.E.

1995-05-01

The purpose of the loose part detection system is to trigger an alarm whenever it is warranted, to localize, and to provide information on the type of loose part involved and the damages it may provoke. It is therefore indispensable to have efficient instrumentation, beginning with the sensors which must provide us with a response to all mechanical impacts in natural trapping areas (reactor vessel and steam generator water box). A series of mass- and energy-calibrated impacts have been generated on 45 points in the primary cooling system of a nuclear plant unit in the startup phase. This test provided insights into the relationship between sensor signals and various impact parameters such as velocity of impact or loose part mass. Once these parameters were known, it was possible to define a method for evaluating the detection threshold of sensors depending on the way they are mounted. (author)

A review of heat pump drying: Part 1 - systems, models and studies

Energy Technology Data Exchange (ETDEWEB)

Colak, Neslihan [Dept. of Food Engineering, Faculty of Engineering, Pamukkale Univ., 20070 Denizli (Turkey); Hepbasli, Arif [Dept. of Mechanical Engineering, Faculty of Engineering, Ege Univ., 35100 Bornova, Izmir (Turkey)

2009-09-15

The first heat pump dryer (HPD) patent applications were started in 1973, while recently, there has been a great interest in utilizing HPDs for drying fruits, vegetables and biological materials. This study deals with reviewing heat pump drying studies and consists of two parts. In the first part of this study, historical development of HPDs was briefly given first. Description of these systems was then presented. Finally, studies conducted on HPD were reviewed in terms of process efficiency modeling and progress of quality. (author)

Design study on dose evaluation method for employees at severe accident

International Nuclear Information System (INIS)

Yoshida, Yoshitaka; Irie, Takashi; Kohriyama, Tamio; Kudo, Seiichi; Nishimura, Kazuya

2002-01-01

If a severe accident occurs in a pressurized water reactor plant, it is required to estimate dose values of operators engaged in emergency such as accident management, repair of failed parts. However, it might be difficult to measure radiation dose rate during the progress of an accident, because radiation monitors are not always installed in areas where the emergency activities are required. In this study, we analyzed the transport of radioactive materials in case of a severe accident, investigated a method to obtain radiation dose rate in the plant from estimated radioactive sources, made up a prototype analyzing system from this design study, and then evaluated its availability. As a result, we obtained the following: (1) A new dose evaluation method was established to predict the radiation dose rate at any point in the plant during a severe accident scenario. (2) This evaluation of total dose including access route and time for emergency activities is useful for estimating radiation dose limit for these employee actions. (3) The radiation dose rate map is effective for identifying high radiation areas and for choosing a route with lower radiation dose rate. (author)

Studying and evaluating pharmaceutical policy--becoming a part of the policy and consultative process

DEFF Research Database (Denmark)

Almarsdóttir, Anna Birna; Traulsen, Janine Marie

2006-01-01

In this last article in the series the authors focus on the issue of researching and evaluating pharmaceutical policy. The past five articles made an argument for why pharmaceutical policy is important and why it is different from health policy. The evidence base needed for pharmaceutical policym...... culture around pharmaceutical policy. They emphasize the importance of pharmaceutical specialists' (i.e., pharmacists') involvement in pharmaceutical policy analysis and the policy consultative process....

Multi-approach evaluations of a cascade-Organic Rankine Cycle (C-ORC) system driven by diesel engine waste heat: Part B-techno-economic evaluations

International Nuclear Information System (INIS)

Yu, Guopeng; Shu, Gequn; Tian, Hua; Wei, Haiqiao; Liang, Xingyu

2016-01-01

Highlights: • A novel C-ORC system was proposed for recovering waste heat from a diesel engine. • Techno-economic evaluations were conducted to explore C-ORC’s practical benefits. • Toluene and R143a show the best economic performance for two ORC loops in C-ORC. • The best electricity production cost is 0.27 Dollar/kW h under engine conditions. - Abstract: A novel transcritical cascade-Organic Rankine Cycle (C-ORC) system was proposed for recovering multi-grade waste heat from a typical heavy-duty diesel engine. The C-ORC comprises a high temperature ORC loop (HT-Loop) and a low temperature ORC loop (LT-Loop) for recovering waste heat from engine exhaust gas (EG), exhaust gas recirculation (EGR), jacket water (JW) and charge air (CA) in a cascaded pattern. The basic thermodynamic evaluation on energy and exergy aspects were covered in the companion piece-‘Part A-thermodynamic evaluations’, indicating that the proposed C-ORC possesses great heat-recovery capacities and efficiency-promotion potentials. The techno-economic evaluations in Part B of this paper will further explore the performance of the C-ORC system based on costs and benefits in order to reveal its practical benefits. Four techno-economic indexes are mainly focused on: component-to-system cost ratio (CSCR), electricity production cost (EPC), depreciated payback period (DPP) and savings-to-investment ratio (SIR). Under rated engine conditions, working fluids were initially compared to find the most economical fluids for the HT-Loop and the LT-Loop respectively. Results indicated that toluene and R143a still make the perfect match for the C-ORC with the lowest EPC (0.27 Dollar/kW h), DPP (7.8 years) and the highest SIR (1.6). As to component-to-system cost ratio (CSCR), the cost of expanders and heat exchangers together account for more than 3/4 of the total system cost, and the expander of the LT-Loop is the most costly single component. The C-ORC’s techno-economic performance was

Numerical evaluation of ABS parts fabricated by fused deposition modeling and vapor smoothing

Directory of Open Access Journals (Sweden)

Sung-Uk Zhang

2017-12-01

Full Text Available The automotive industry has focused to use polymer materials in order to increase energy efficiency. So, the industry pays attention to use 3D printing technologies using several polymers. Among several 3D printer technologies, fused deposition modeling (FDM is one of the popular 3D printing technologies due to an inexpensive extrusion machine and multi-material printing. FDM could use thermoplastics such as ABS, PLA, ULTEM so on. However, it has a problem related to the post-processing because FDM has relatively poor layer resolution. In this study, the mechanical properties of ABS parts fabricated by FDM were measured. The ABS parts were divided into one with vapor smoothing process and the other without the vapor smoothing process which is one of the post-processing methods. Using dynamic mechanical analysis (DMA and dilatometer, temperature-dependent storage modulus and CTE for ABS specimens were measured. Based on the measured thermo-mechanical properties of ABS parts, finite element analysis was performed for an automotive bumper made of ABS. Moreover, response surface methodology was applied to study relationships among design parameters of thickness of the bumper, ambient temperature, and application of the vapor smoothing process. In result, a design guideline for a ABS product could be provided without time-consuming experiments

Gender Influence on Part-time Working: An Empirical Study Upon the EU and Turkey

Directory of Open Access Journals (Sweden)

Aslı Beyhan Acar

2014-04-01

Full Text Available In this empirical study, it’s investigated differences of part-time working rates between men and women in the period of 2000-2012. 17 members of the EU and Turkey -as a candidate country- are participated in the study. Turkey is participated into the study too, because Turkey must adapt the most of the regulations of EU as a candidate member of the Union. The data are collected from OECD and World Bank statistics web site. Beyond that many database indicate part-time employment rates for both common and national definition of part-time working for statistical purpose. According to this it’s aimed to determine whether there is a significant difference between part-time working rates that are based on common and national definition. In the literature, there are some studies that investigate fertility rates and part-time employment rates of women. The correlation of these two variables that are belonged the years 2000-2012 is tested and the findings are indicated in the study. Furthermore, it’s analyzed the rate differences of part-time working for men and women in the period of 2000-2012.

Gender Influence on Part-time Working: An Empirical Study upon the EU and Turkey

Directory of Open Access Journals (Sweden)

Aslı Beyhan Acar

2016-01-01

Full Text Available In this empirical study, it’s investigated differences of part-time working rates between men and women in the period of 2000-2012. 17 members of the EU and Turkey -as a candidate country- are participated in the study. Turkey is participated into the study too, because Turkey must adapt the most of the regulations of EU as a candidate member of the Union. The data are collected from OECD and World Bank statistics web site. Beyond that many database indicate part-time employment rates for both common and national definition of part-time working for statistical purpose. According to this it’s aimed to determine whether there is a significant difference between part-time working rates that are based on common and national definition. In the literature, there are some studies that investigate fertility rates and part-time employment rates of women. The correlation of these two variables that are belonged the years 2000-2012 is tested and the findings are indicated in the study. Furthermore, it’s analyzed the rate differences of part-time working for men and women in the period of 2000-2012.

AN EVALUATIVE STUDY OF AN ICT MODULE FOR A SCHOOL LEADERSHIP AND MANAGEMENT PREPARATION PROGRAM

Directory of Open Access Journals (Sweden)

Sarietjie MUSGRAVE

2017-04-01

Full Text Available This study reports on findings of an evaluative study on the effectiveness of an information and communication technology (ICT module that forms part of the Advanced Certificate in Education: School Leadership and Management program. The study was carried out among distance education (DE students from the University of the Free State enrolled for above mentioned module. Two ICT audit surveys were used to gather data. This study used two modes of evaluation: Jung and Latchem’s (2007 quality indicators for DE and comparison. The findings highlight ready access to ICT, technical support, appropriate guidance and support by knowledgeable, innovative and committed facilitators and the creation of a sense of community as imperatives for teaching education leaders ICT skills and knowledge.

Information security risk management and incompatible parts of organization

OpenAIRE

Talabeigi, Elham; Naeeini, Seyyed Gholamreza Jalali

2016-01-01

Purpose: we prepared a questionnaire to evaluate Incompatible parts and also risk management in University of Science and Technology E-Learning Center and studying the Incompatible parts impacts on utility of organization. Design/methodology/approach: By using coalitional game theory we present a new model to recognize the degrees of incompatibility among independent divisions of an organization with dependent security assets. Based on positive and negative interdependencies in...

Student perceptions of evaluation in undergraduate medical education: A qualitative study from one medical school

Directory of Open Access Journals (Sweden)

Schiekirka Sarah

2012-06-01

Full Text Available Abstract Background Evaluation is an integral part of medical education. Despite a wide use of various evaluation tools, little is known about student perceptions regarding the purpose and desired consequences of evaluation. Such knowledge is important to facilitate interpretation of evaluation results. The aims of this study were to elicit student views on the purpose of evaluation, indicators of teaching quality, evaluation tools and possible consequences drawn from evaluation data. Methods This qualitative study involved 17 undergraduate medical students in Years 3 and 4 participating in 3 focus group interviews. Content analysis was conducted by two different researchers. Results Evaluation was viewed as a means to facilitate improvements within medical education. Teaching quality was believed to be dependent on content, process, teacher and student characteristics as well as learning outcome, with an emphasis on the latter. Students preferred online evaluations over paper-and-pencil forms and suggested circulating results among all faculty and students. Students strongly favoured the allocation of rewards and incentives for good teaching to individual teachers. Conclusions In addition to assessing structural aspects of teaching, evaluation tools need to adequately address learning outcome. The use of reliable and valid evaluation methods is a prerequisite for resource allocation to individual teachers based on evaluation results.

La burocrazia nella ricerca pubblica. PARTE I, Una rassegna dei principali studi

OpenAIRE

Mario Coccia; Alessandro Gobbino

2006-01-01

The purpose of this paper is to present the main studies carried out on the Bureaucracy in public research institutions. The first part of the paper describes the classical theory concerning the Bureaucracy developed by Weber, Merton et al. The second part of the research focuses the studies on the bureaucracy carried out on public research institutions in United States of America and Norway. Some concluding remarks complete the research.

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

International Nuclear Information System (INIS)

2005-01-01

Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project.

Evaluating Evaluation Systems: Policy Levers and Strategies for Studying Implementation of Educator Evaluation. Policy Snapshot

Science.gov (United States)

Matlach, Lauren

2015-01-01

Evaluation studies can provide feedback on implementation, support continuous improvement, and increase understanding of evaluation systems' impact on teaching and learning. Despite the importance of educator evaluation studies, states often need support to prioritize and fund them. Successful studies require expertise, time, and a shared…

A Comparative Study of Nucleation Parameterizations: 2. Three-Dimensional Model Application and Evaluation

Science.gov (United States)

Following the examination and evaluation of 12 nucleation parameterizations presented in part 1, 11 of them representing binary, ternary, kinetic, and cluster‐activated nucleation theories are evaluated in the U.S. Environmental Protection Agency Community Multiscale Air Quality ...

A four-part working bibliography of neuroethics: part 2--Neuroscientific studies of morality and ethics.

Science.gov (United States)

Darragh, Martina; Buniak, Liana; Giordano, James

2015-02-15

Moral philosophy and psychology have sought to define the nature of right and wrong, and good and evil. The industrial turn of the twentieth century fostered increasingly technological approaches that conjoined philosophy to psychology, and psychology to the natural sciences. Thus, moral philosophy and psychology became ever more vested to investigations of the anatomic structures and physiologic processes involved in cognition, emotion and behavior--ultimately falling under the rubric of the neurosciences. Since 2002, neuroscientific studies of moral thought, emotions and behaviors have become known as--and a part of--the relatively new discipline of neuroethics. Herein we present Part 2 of a bibliography of neuroethics from 2002-2013 addressing the "neuroscience of ethics"--studies of putative neural substrates and mechanisms involved in cognitive, emotional and behavioral processes of morality and ethics. A systematic survey of the neuroethics literature was undertaken. Bibliographic searches were performed by accessing 11 databases, 8 literature depositories, and 4 individual journal searches, and employed indexing language for National Library of Medicine (NLM) Medical Subject Heading databases. All bibliographic searches were conducted using the RefWorks citation management program. This bibliography lists 397 articles, 65 books, and 52 book chapters that present (1) empirical/experimental studies, overviews, and reviews of neural substrates and mechanisms involved in morality and ethics, and/or (2) reflections upon such studies and their implications. These works present resources offering iterative descriptions, definitions and criticisms of neural processes involved in moral cognition and behaviors, and also provide a historical view of this field, and insights to its developing canon.

[Evaluation by case managers dementia : An explorative practice based study on types and content].

Science.gov (United States)

Ketelaar, Nicole A B M; Jukema, Jan S; van Bemmel, Marlies; Adriaansen, Marian J M; Smits, Carolien H M

2017-06-01

This practice based explorative study aims to provide insight into the ways in which case managers shape and fill up the evaluation phase of their support of the informal care network of persons with dementia. A combination of quantitative and qualitative research methods were used. A group of 57 case managers of persons with dementia in three different organisational networks took part in this study. Results from the quantitative and qualitative data are organized into four themes: (1) attitude towards evaluation, (2) forms of evaluation, (3) implementation of evaluation and (4) content of evaluation. There are different ways in shaping evaluation and the content of it. The importance of interim and final evaluation is recognized, but is difficult to realize in a methodical way. Barriers experienced by the case managers include various factors associated both with clients as professionals. Case managers evaluate continuously and in an informal way to assess whether the extent of their assistance is meeting the needs of the client and informal network. Case managers do not use systematic evaluation to measure the quality of care they offer to persons with dementia and their caregivers. The findings demand a discussion on the level of clients, as well as on the professional and societal level about the way case managers should evaluate their support.

Structure Property Studies for Additively Manufactured Parts

Energy Technology Data Exchange (ETDEWEB)

Milenski, Helen M [Univ. of Mexico, Los Alamos, NM (United States); Schmalzer, Andrew Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kelly, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-08-17

Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

Use of Genomic Data in Risk Assessment Caes Study: II. Evaluation of the Dibutyl Phthalate Toxicogenomic Dataset

Science.gov (United States)

An evaluation of the toxicogenomic data set for dibutyl phthalate (DBP) and male reproductive developmental effects was performed as part of a larger case study to test an approach for incorporating genomic data in risk assessment. The DBP toxicogenomic data set is composed of ni...

The system evaluation for report writing skills of summary by HGA-SVM with Ontology: Medical case study in problem based learning

Science.gov (United States)

Yenaeng, Sasikanchana; Saelee, Somkid; Samai, Wirachai

2018-01-01

The system evaluation for report writing skills of summary by Hybrid Genetic Algorithm-Support Vector Machines (HGA-SVM) with Ontology of Medical Case Study in Problem Based Learning (PBL) is a system was developed as a guideline of scoring for the facilitators or medical teacher. The essay answers come from medical student of medical education courses in the nervous system motion and Behavior I and II subject, a third year medical student 20 groups of 9-10 people, the Faculty of Medicine in Prince of Songkla University (PSU). The audit committee have the opinion that the ratings of individual facilitators are inadequate, this system to solve such problems. In this paper proposes a development of the system evaluation for report writing skills of summary by HGA-SVM with Ontology of medical case study in PBL which the mean scores of machine learning score and humans (facilitators) score were not different at the significantly level .05 all 3 essay parts contain problem essay part, hypothesis essay part and learning objective essay part. The result show that, the average score all 3 essay parts that were not significantly different from the rate at the level of significance .05.

Evaluation of the Photovoltaic System Installation Impact to an Electric Power Grid Part 1: Simulation of photovoltaic generation by applying a meteorological model

Directory of Open Access Journals (Sweden)

Juan Ernesto Wyss Porras

2015-12-01

Full Text Available The impact of the installation of a large-scale photovoltaic (PV system to the electric power grid management is analyzed numerically in this series of works. In this part 1, the solar irradiance at the target country, Guatemala, is evaluated with a weather forecasting model, and PV energy potential is estimated. From the computed potential distribution, the appropriate area for installation of a large-scale PV system is selected. This area is where the solar irradiance is large and the energy consumption regions are close by. The optimal tilted angle of the PV panels is proposed as well from the PV output simulation. The time series data of the PV output is also evaluated in this part, and it will be applied to the analysis of the impact of the PV installation to the electric power grid management in the following part of this series of works.

Conceptual design report: Nuclear materials storage facility renovation. Part 6, Alternatives study

International Nuclear Information System (INIS)

1995-01-01

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for material and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment 111-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VI - Alternatives Study, presents a study of the different storage/containment options considered for NMSF

Computer-Aided Parts Estimation

OpenAIRE

Cunningham, Adam; Smart, Robert

1993-01-01

In 1991, Ford Motor Company began deployment of CAPE (computer-aided parts estimating system), a highly advanced knowledge-based system designed to generate, evaluate, and cost automotive part manufacturing plans. cape is engineered on an innovative, extensible, declarative process-planning and estimating knowledge representation language, which underpins the cape kernel architecture. Many manufacturing processes have been modeled to date, but eventually every significant process in motor veh...

The Work-Study Nexus: The Challenges of Balancing Full-Time Business Degree Study with a Part-Time Job

Science.gov (United States)

Richardson, Mark; Evans, Carl; Gbadamosi, Gbolahan

2014-01-01

This study examined how full-time university students cope with part-time working during term time. A qualitative approach was used to examine how students simultaneously manage the two activities, and how part-time working affects their academic study. Semi-structured interviews were used to obtain data from a sample of 30 undergraduate business…

Shrinkage calibration method for μPIM manufactured parts

DEFF Research Database (Denmark)

Quagliotti, Danilo; Tosello, Guido; Salaga, J.

2016-01-01

Five green and five sintered parts of a micro mechanical component, produced by micro powder injection moulding, were measured using an optical coordinate measuring machine. The aim was to establish a method for quality assurance of the final produced parts. Initially, the so called “green” parts...... were compared with the sintered parts (final products) calculating the percentage of shrinkage after sintering. Successively, the expanded uncertainty of the measured dimensions were evaluated for each single part as well as for the overall parts. Finally, the estimated uncertainty for the shrinkage...... was evaluated propagating the expanded uncertainty previously stated and considering green and sintered parts correlated. Results showed that the proposed method can be effective instating tolerances if it is assumed that the variability on the dimensions induced by the shrinkage equals the propagated expanded...

Classification and evaluation of the functional results of replanted parts of the hand at the Prince of Wales Hospital and the Prince of Wales Children's Hospital: 1984 to 1988.

Science.gov (United States)

Milroy, B C; Sackelariou, R P; Lendvay, P G; Baldwin, M R; McGlynn, M

1991-01-01

This paper describes a simple method of classification and evaluation of the functional results of replanted and revascularized parts in the hand. The results are presented in graphic form and have been analyzed to correlate various factors: injured part, cause, and zone (level) of injury. The type of injury, ischemic time and age have been studied in more detail to determine their influence of the final functional result. The series contains 187 amputated and devascularized parts of the hand in 119 patients who have undergone surgery at the Prince of Wales Hospital from 1984 through 1988. The length of cold or warm ischemic times, up to 16 hours in this series, while not affecting survival of the amputated part, does adversely affect the functional result. The survival rate of replanted parts in children was significantly less favorable than in adults, but the functional results were uniformly superior.

Evaluation of multi-outcome longitudinal studies

DEFF Research Database (Denmark)

Jensen, Signe Marie; Pipper, Christian Bressen; Ritz, Christian

2015-01-01

Evaluation of intervention effects on multiple outcomes is a common scenario in clinical studies. In longitudinal studies, such evaluation is a challenge if one wishes to adequately capture simultaneous data behavior. In this situation, a common approach is to analyze each outcome separately...... conservative conclusions. We propose an alternative approach for multiplicity adjustment that incorporates dependence between outcomes, resulting in an appreciably less conservative evaluation. The ability of the proposed method to control the familywise error rate is evaluated in a simulation study...

Scientific evaluation at the CEA; Evaluation scientifique au CEA

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

This report presents a statement of the scientific and technical activity of the French atomic energy commission (CEA) for the year 1998. This evaluation is made by external and independent experts and requires some specific dispositions for the nuclear protection and safety institute (IPSN) and for the direction of military applications (DAM). The report is divided into 5 parts dealing successively with: part 1 - the CEA, a public research organization (civil nuclear research, technology research and transfers, defence activities); the scientific and technical evaluation at the CEA (general framework, evaluation of the IPSN and DAM); part 2 - the scientific and technical councils (directions of fuel cycle, of nuclear reactors, and of advanced technologies); part 3 - the scientific councils (directions of matter and of life sciences); the nuclear protection and safety institute; the direction of military applications; part 4 - the corresponding members of the evaluation; part 5 - the list of scientific and technical councils and members. (J.S.)

Impacts of transportation sector emissions on future U.S. air quality in a changing climate. Part I: Projected emissions, simulation design, and model evaluation.

Science.gov (United States)

Campbell, Patrick; Zhang, Yang; Yan, Fang; Lu, Zifeng; Streets, David

2018-07-01

Emissions from the transportation sector are rapidly changing worldwide; however, the interplay of such emission changes in the face of climate change are not as well understood. This two-part study examines the impact of projected emissions from the U.S. transportation sector (Part I) on ambient air quality in the face of climate change (Part II). In Part I of this study, we describe the methodology and results of a novel Technology Driver Model (see graphical abstract) that includes 1) transportation emission projections (including on-road vehicles, non-road engines, aircraft, rail, and ship) derived from a dynamic technology model that accounts for various technology and policy options under an IPCC emission scenario, and 2) the configuration/evaluation of a dynamically downscaled Weather Research and Forecasting/Community Multiscale Air Quality modeling system. By 2046-2050, the annual domain-average transportation emissions of carbon monoxide (CO), nitrogen oxides (NO x ), volatile organic compounds (VOCs), ammonia (NH 3 ), and sulfur dioxide (SO 2 ) are projected to decrease over the continental U.S. The decreases in gaseous emissions are mainly due to reduced emissions from on-road vehicles and non-road engines, which exhibit spatial and seasonal variations across the U.S. Although particulate matter (PM) emissions widely decrease, some areas in the U.S. experience relatively large increases due to increases in ship emissions. The on-road vehicle emissions dominate the emission changes for CO, NO x , VOC, and NH 3 , while emissions from both the on-road and non-road modes have strong contributions to PM and SO 2 emission changes. The evaluation of the baseline 2005 WRF simulation indicates that annual biases are close to or within the acceptable criteria for meteorological performance in the literature, and there is an overall good agreement in the 2005 CMAQ simulations of chemical variables against both surface and satellite observations. Copyright © 2018

Evaluation of Inhibitory and Lethal Effects of Aqueous, Ethanolic and Hydroalcoholic Extracts of Aerial Parts of Salvia chorassanica against Some Gram-negative and Gram-positive Bacteria in Vitro

Directory of Open Access Journals (Sweden)

Azam Mehraban

2016-05-01

Full Text Available Abstract Background and Objectives: Development of bacterial resistance to antibiotics has led to an increased tendency to development of new more effective and non-toxic antimicrobial compounds. In this study, the inhibitory and lethal effects of aqueous, ethanolic, and hydroalcoholic extracts of aerial parts of Salvia chorassanica were evaluated against Listeria monocytogenes, Bacillus cereus, Salmonella typhi, and Escherichia coli O:157. Methods: In this study, Kirby–Bauer disk diffusion method was used to evaluate antimicrobial activity. In this method, bacteria were cultivated as grass culture in Mueller Hinton Agar (MHA media. To determine the minimum inhibitory concentration and minimum bactericidal concentration, micro-dilution method with ELISA and addition of phenyl tetrazolium chloride reagent, were used. Data were analyzed using one-way ANOVA and Duncan’s test at the significance level of p<0.05. Results: The highest diameter of inhibition in agar diffusion method was related to hydroalcoholic extract of aerial parts of Salvia chorassanica against Gram-positive bacteria Bacillus cereus. The amount of calculated MIC of hydro-alcoholic extract for Gram-positive bacteria was 30mg/ml. This amount was the lowest among other measured MIC. Conclusion: Based on the results of this study, Gram-negative bacteria showed more resistance to different extracts of aerial parts of Salvia chorassanica as compared to Gram-positive bacteria, so that Salmonella typhi was found to be the most resistant bacterium among the tested bacteria.

Medicare Part D and Portfolio Choice.

Science.gov (United States)

Ayyagari, Padmaja; He, Daifeng

2016-05-01

This study evaluates the impact of medical expenditure risk on portfolio choice among the elderly. The risk of large medical expenditures can be substantial for elderly individuals and is only partially mitigated by access to health insurance. The presence of deductibles, copayments, and other cost-sharing mechanisms implies that medical spending risk can be viewed as an undiversifiable background risk. Economic theory suggests that increases in background risk reduce the optimal financial risk that an individual or household is willing to bear (Pratt and Zeckhauser 1987; Elmendorf and Kimball 2000). In this study, we evaluate this hypothesis by estimating the impact of the introduction of the Medicare Part D program, which significantly reduced prescription drug spending risk for seniors, on portfolio choice.

Evaluation method of iodine re-evolution from an in-containment water pool after a loss of coolant accident, Part I: pH estimation of a solution with various chemicals

International Nuclear Information System (INIS)

Kim, Tae Hyeon; Jeong, Ji Hwan

2016-01-01

Highlights: • It is required to evaluate re-evolved iodine from sump water after LOCA. • pH evaluation based on Gibbs free energy minimization. • Program was developed to evaluate chemical equilibrium and pH solutions. • Predictions are in good agreement with experimental data. - Abstract: Radioactive iodine, which is released into the atmosphere of the containment building, is absorbed into the containment spray water and dissolved to be ionized. This iodine-rich water is then transported to the in-containment refueling water storage tank (IRWST) in APR1400 nuclear power plants. When the pH of the water is below 7, the dissolved iodine converts to molecular iodine and re-evolves from the water and returns to the atmosphere. A series of studies have been conducted in order to evaluate the iodine re-evolution from the IRWST. This study consists of two parts: the pH evaluation method and the evaluation of the iodine re-evolution. This paper presents the first part, i.e. the pH evaluation method. The equilibrium concentrations of various chemicals in a solution are determined at the minimum Gibbs’ free energy. This method is useful for complex reactant problems rather than equilibrium constants method because the latter method requires numerous equilibrium constants and there might be missing equilibrium constants associated with the solution. The calculated pH values of solutions are compared with the experimental measurements in order to validate this method and the thermodynamic data of the chemicals incorporated into the program. The estimated values for solutions are in good agreement with the experimental measurements within a difference of less than 3.3%.

Manufacturing strategy in the auto parts industry: a multicases study in companies at sorocaba’s region

Directory of Open Access Journals (Sweden)

Márcia Regina Neves Guimarães

2014-05-01

Full Text Available The alignment of manufacturing strategy with the business strategy is fundamental for achieving sustainable competitive advantage. In the particular case of the automotive industry, it is verified that the production strategy of suppliers is strongly influenced by the strategy of automakers. In this context, this paper aims at presenting characteristics of the content of the production strategy of four auto parts companies besides analyzing the influence of automakers in the definition of the strategy contents.This is a descriptive and exploratory research that uses  a qualitative approach and the multi-case study method. Among the main results, it was found that the prevalent competitive priority in the companies is quality followed by delivery. In the decision areas, it was noted that customers have great influence on the quality management of these companies and in the R&D activities, besides demanding frequent deliveries. Finally, it was found that auto parts companies seek to strengthen their competitive priorities by adopting criteria from suppliers  for selecting and evaluating.

Practical Usage of Multiple-Choice Questions as Part of Learning and Self-Evaluation

Directory of Open Access Journals (Sweden)

Paula Kangasniemi

2016-12-01

Full Text Available The poster describes how the multiple-choice questions could be a part of learning, not only assessing. We often think of the role of questions only in order to test the student's skills. We have tested how questions could be a part of learning in our web-based course of information retrieval in Lapland University. In web-based learning there is a need for high-quality mediators. Mediators are learning promoters which trigger, support, and amplify learning. Mediators can be human mediators or tool mediators. The tool mediators are for example; tests, tutorials, guides and diaries. The multiple-choice questions can also be learning promoters which select, interpret and amplify objects for learning. What do you have to take into account when you are preparing multiple-choice questions as mediators? First you have to prioritize teaching objectives: what must be known and what should be known. According to our experience with contact learning, you can assess what the things are that students have problems with and need more guidance on. The most important addition to the questions is feedback during practice. The questions’ answers (wrong or right are not important. The feedback on the answers are important to guide students on how to search. The questions promote students’ self-regulation and self-evaluation. Feedback can be verbal, a screenshot or a video. We have added a verbal feedback for every question and also some screenshots and eight videos in our web-based course.

Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 1

International Nuclear Information System (INIS)

1994-01-01

As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID, is proceeding with a more detailed evaluation of the design's capability for plutonium disposition

Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 2

International Nuclear Information System (INIS)

1994-01-01

As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID, is proceeding with a more detailed evaluation of the design's capability for plutonium disposition

EIA and EINP. Evaluation study

International Nuclear Information System (INIS)

Lande, R.W.I. van der; De Vries, E.F.

2001-01-01

The evaluation study on the title subjects concerns two subsidy tools in the Netherlands: the Energy Investment Rebate (EIA, abbreviated in Dutch) and the Subsidy for Energy in the non-profit sector and other special sectors (EINP, abbreviated in Dutch). The central question in the evaluation was to what extent did the EIA and EINP contribute to the original policy targets and at what costs. The evaluation has been carried out by means of a desk study, interviews, and an analysis of bottlenecks and possible solutions. [nl

Lapabot: a compact telesurgical robot system for minimally invasive surgery: part II. Telesurgery evaluation.

Science.gov (United States)

Park, Jun Woo; Lee, Duck Hee; Kim, Young Woo; Lee, Byeong Han; Jo, Yung Ho

2012-05-01

As described in Part I, the Lapabot was developed considering telesurgery from the initial design stage. The robot configuration is based on the master-slave structure in which the operator can be separated spatially from the patient. The distributed control architecture communicating through high-speed network enables remote control of surgical robot manipulators. In this work, we added network communication modules using user datagram protocol/internet protocol for implementation of the telesurgical system. For a stable network environment, a dedicated research network was adopted. To characterize the network environment, a data packet sender and a repeater whose packet length and packet structure are similar to those of the real data packet were developed. The developed system was evaluated through in-vitro and in-vivo experiments. With the developed system, we have successfully performed remote control of the Lapabot. The roundtrip time delay for the control signal ranged from 1.4 to 4.1 ms. The total time delay for the operator including image signal acquisition and transmission delays was under 333 ms. It did not impede surgical procedures. Initial evaluation results demonstrate the feasibility of the developed telesurgical system.

A-Part Gel, an adhesion prophylaxis for abdominal surgery: a randomized controlled phase I-II safety study [NCT00646412].

Science.gov (United States)

Lang, Reinhold; Baumann, Petra; Schmoor, Claudia; Odermatt, Erich K; Wente, Moritz N; Jauch, Karl-Walter

2015-01-01

Intra-abdominal surgical intervention can cause the development of intra-peritoneal adhesions. To reduce this problem, different agents have been tested to minimize abdominal adhesions; however, the optimal adhesion prophylaxis has not been found so far. Therefore, the A-Part(®) Gel was developed as a barrier to diminish postsurgical adhesions; the aim of this randomized controlled study was a first evaluation of its safety and efficacy. In this prospective, controlled, randomized, patient-blinded, monocenter phase I-II study, 62 patients received either the hydrogel A-Part-Gel(®) as an anti-adhesive barrier or were untreated after primary elective median laparotomy. Primary endpoint was the occurrence of peritonitis and/or wound healing impairment 28 ± 10 days postoperatively. As secondary endpoints anastomotic leakage until 28 days after surgery, adverse events and adhesions were assessed until 3 months postoperatively. A lower rate of wound healing impairment and/or peritonitis was observed in the A-Part Gel(®) group compared to the control group: (6.5 vs. 13.8 %). The difference between the two groups was -7.3%, 90 % confidence interval [-20.1, 5.4 %]. Both treatment groups showed similar frequency of anastomotic leakage but incidence of adverse events and serious adverse events were slightly lower in the A-Part Gel(®) group compared to the control. Adhesion rates were comparable in both groups. A-Part Gel(®) is safe as an adhesion prophylaxis after abdominal wall surgery but no reduction of postoperative peritoneal adhesion could be found in comparison to the control group. This may at least in part be due to the small sample size as well as to the incomplete coverage of the incision due to the used application. NCT00646412.

An evaluation of highly insulated cold zinc roofs in a moderate humid region - Part II: Corrosion behavior of zinc sheeting

NARCIS (Netherlands)

Zheng, R.; Janssens, A.; Carmeliet, J.; Bogaerts, W.; Hens, H.

2004-01-01

In a previous paper [Zheng et al., Hygrothermal Performance, Part I; Const Building Mater, Vol. 18, Issue 1, pp. 49-59], the hygrothermal performances of four well-insulated cold zinc roofs were evaluated. This paper investigates the corrosion behavior of the zinc sheeting used in the roofs. The

Evaluating the Use of Medicare Part D in the Veteran Population With Spinal Cord Injury/Disorder.

Science.gov (United States)

Hatch, Maya N; Raad, Jason; Suda, Katie; Stroupe, Kevin T; Hon, Alice J; Smith, Bridget M

2018-02-06

To examine the different sources of medications, the most common drug classes filled, and the characteristics associated with Medicare Part D pharmacy use in veterans with spinal cord injury/disorder (SCI/D). Retrospective, cross-sectional, observational study. Outpatient clinics and pharmacies. Veterans (N=13,442) with SCI/D using Medicare or Veteran Affairs pharmacy benefits. Not applicable. Characteristics and top 10 most common drug classes were examined in veterans who (1) used VA pharmacies only; (2) used both VA and Medicare Part D pharmacies; or (3) used Part D pharmacies only. Chi-square tests and multinomial logistic regression analyses were used to determine associations between various patient variables and source of medications. Patient level frequencies were used to determine the most common drug classes. A total of 13,442 veterans with SCI/D were analyzed in this study: 11,788 (87.7%) used VA pharmacies only, 1281 (9.5%) used both VA and Part D pharmacies, and 373 (2.8%) used Part D pharmacies only. Veterans older than 50 years were more likely to use Part D pharmacies, whereas those with traumatic injury, or secondary conditions, were less associated with the use of Part D pharmacies. Opioids were the most frequently filled drug class across all groups. Other frequently used drug classes included skeletal muscle relaxants, gastric medications, antidepressants (other category), anticonvulsants, and antilipemics. Approximately 12% of veterans with SCI/D are receiving medication outside the VA system. Polypharmacy in this population of veterans is relatively high, emphasizing the importance of health information exchange between systems for improved care for this medically complex population. Published by Elsevier Inc.

Portable digital assistants (PDAs) in dentistry: part II--pilot study of PDA use in the dental clinic.

Science.gov (United States)

Reynolds, P A; Harper, J; Dunne, S; Cox, M; Myint, Y K

2007-04-28

To describe a simple technical evaluation of the access, security issues and uses of wireless networked PDAs in a dental clinic and report a pilot study investigating students' educational use of PDAs to access a Virtual Learning Environment (VLE) in a dental clinic. To undertake a technical evaluation of wireless networking to PDAs focusing on security issues, robustness of the system and accessibility particularly to educational resources. To evaluate the impact of using a PDA on undergraduate students in the dental clinic and at home. Part II describes the technical and educational evaluation of PDAs used by one group of 12 undergraduate fourth year students in the Primary Dental Care clinic. A cross over trial of six students with PDAs and six without was carried out during one semester of 12 weeks. Technical issues such as secure internet access using wireless connectivity were addressed. An assessment of the general and educational use and the students' attitudes towards using PDAs was undertaken using online questionnaires and focus group discussions. Over 90% of participants wanted PDAs as part of their dental kit. The potential of PDA use in dental training was demonstrated by a good to excellent response by over 75% of participants to having access to online support materials, particularly videos, being able to make notes for individual study and to keep a diary of their commitments to teaching sessions. Recreational use included a 100% good to excellent response to playing games and keeping a diary. The PDA proved to be a convenient and versatile mode of access to online education. Technical solutions enabled a substantial proportion of the functionality of WebCT (Web Course Tools) to be accessed by the students in a clinical environment. Both novice and experienced users were able to appreciate the use of the PDA and the less able considered that their ICT skills had improved. However, further research is needed to determine how students use a range of

Modern spinal instrumentation. Part 2: Multimodality imaging approach for assessment of complications

International Nuclear Information System (INIS)

Allouni, A.K.; Davis, W.; Mankad, K.; Rankine, J.; Davagnanam, I.

2013-01-01

Radiologists frequently encounter studies demonstrating spinal instrumentation, either as part of the patient's postoperative evaluation, or as incidental to a study performed for another purpose. It is important for the reporting radiologist to identify potential complications of commonly used spinal implants. Part 1 of this review examined both the surgical approaches used and the normal appearances of these spinal implants and bone grafting techniques. This second part of the review will focus on the multimodal imaging strategy adopted in the assessment of the instrumented spine and the demonstration of imaging findings of common postoperative complications.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

Science.gov (United States)

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

Formal specification of open distributed systems - overview and evaluation of existing methods

International Nuclear Information System (INIS)

Stoelen, Ketil

1998-02-01

This report classifies, compares and evaluates eleven specification languages for distributed systems. The eleven specification languages have been picked from a wide spectrum of areas embracing both industry and research. We have selected languages that we see as important; either because they have proved useful within the commercial software industry, or because they play or we expect them to play an important role within research. Based on literature studies, we investigate the suitability of these specification languages to describe open distributed systems. The languages are also evaluated with respect to support for refinement and the characterization of proof-obligations. The report consists of five main parts: Part 1 gives the background and motivation for the evaluation; it also introduces the basic terminology; Part 2 motivates, identifies and formulates the concrete evaluation criterions; Part 3 evaluates the specification languages with respect to the evaluation criterions formulated in Part 2; Part 4 sums up the results from the evaluation in the form of tables; it also draws some conclusions and identifies some directions for further studies; Part 5 consists of two appendices, namely a bibliography and a list of abbreviations. (author)

Outcome of physiotherapy as part of a multidisciplinary rehabilitation in an unselected polio population with one-year follow-up: an uncontrolled study.

Science.gov (United States)

Bertelsen, Merete; Broberg, Susse; Madsen, Ellen

2009-01-01

The aim of this study was to evaluate the outcome of physiotherapy as part of a multidisciplinary rehabilitation. Prospective uncontrolled intervention study. Fifty patients with late effects of polio, first time referred to physiotherapy at the Danish Society of Polio and Accident Victims (PTU) Rehabilitation Centre. The intervention was physiotherapy as an essential part of an individually planned multidisciplinary rehabilitation. The outcome measures Six-Minute Walk Test and Timed-Stands Test were used to assess the functional capacity. Quality of life was evaluated by Medical Outcome Survey Short Form (SF-36) and fatigue by Multidimensional Fatigue Inventory (MFI-20). Patients were tested at baseline; 3 months after the start of rehabilitation and at one-year follow-up. The patients showed significantly better functional capacity on all measurements 3 months after start of intervention and at one-year follow-up. The patients showed significant improvement in 3 of the SF-36 dimensions regarding quality of life, but only the improvement in "general health" remained after one year. This study shows that patients with late effects of polio, who experience new problems related to polio, can benefit from an individually planned multidisciplinary intervention with emphasis on physiotherapy, and the improvement in physical capacity and general health can remain at one-year follow-up.

Field cage studies and progressive evaluation of genetically-engineered mosquitoes.

Directory of Open Access Journals (Sweden)

Luca Facchinelli

Full Text Available A genetically-engineered strain of the dengue mosquito vector Aedes aegypti, designated OX3604C, was evaluated in large outdoor cage trials for its potential to improve dengue prevention efforts by inducing population suppression. OX3604C is engineered with a repressible genetic construct that causes a female-specific flightless phenotype. Wild-type females that mate with homozygous OX3604C males will not produce reproductive female offspring. Weekly introductions of OX3604C males eliminated all three targeted Ae. aegypti populations after 10-20 weeks in a previous laboratory cage experiment. As part of the phased, progressive evaluation of this technology, we carried out an assessment in large outdoor field enclosures in dengue endemic southern Mexico.OX3604C males were introduced weekly into field cages containing stable target populations, initially at 10:1 ratios. Statistically significant target population decreases were detected in 4 of 5 treatment cages after 17 weeks, but none of the treatment populations were eliminated. Mating competitiveness experiments, carried out to explore the discrepancy between lab and field cage results revealed a maximum mating disadvantage of up 59.1% for OX3604C males, which accounted for a significant part of the 97% fitness cost predicted by a mathematical model to be necessary to produce the field cage results.Our results indicate that OX3604C may not be effective in large-scale releases. A strain with the same transgene that is not encumbered by a large mating disadvantage, however, could have improved prospects for dengue prevention. Insights from large outdoor cage experiments may provide an important part of the progressive, stepwise evaluation of genetically-engineered mosquitoes.

Study of graphite sealing for the instrumentation feed through part

International Nuclear Information System (INIS)

Hong, Jintae; Ahn, Sungho; Joung, Changyoung; Kim, Kahye

2013-01-01

Because highly pressurized (15.5 MPa) and highly heated (300 .deg. C) coolant is circulated through the test rig, it needs to seal out the instrumentation feed through part. In this case, general sealing method is brazing and several works have been carried out in nuclear fields. However, because high temperature is induced on the sealing plug and sheaths, it is easy to be broken due to oxidisation of the sheath during brazing process. In addition, because the brazing process is irreversible, if the brazing process fails, the whole inner assembly should be scrapped out. Another approach which uses graphite has been studied to seal out the instrumentation feed through part. In the study, graphite sealing is considered as a sealing method and the improvement of mechanical structure has been studied to improve the workability. To check the sealing performance of the instrumentation feed through part, a hydraulic pressure test and a helium leak test were carried out according to the ASME section III. The criterion of a hydraulic pressure test is 125% of the design pressure. In this study, because the design pressure of the pressure vessel is 17.5 MPa. the sealing criterion should be 21.9 MPa. Also, in a Helium leak test, the criterion is less than 5 Χ 10 -9 torr·liter/sec. At first, a Helium leak test was carried out. After eliminating Helium in the pressure vessel by evacuating the internal area of the pressure vessel up to 1 Χ 10 -3 torr using ASM 310, Helium detection test was carried out by spraying Helium gas at the top face of the top flange for 5 minutes. Fig. 4 shows the rate of Helium leakage is 2.4 Χ 10 -9 torr·liter/sec, and it satisfies the sealing performance criterion. A hydraulic pressure test was also carried out, and there was no leakage or pressure drop when the water in the pressure vessel is pressurized up to 22.5 MPa. The above test results show that graphite powder can seal out the instrumentation feed through part easily with the improved

Study of graphite sealing for the instrumentation feed through part

Energy Technology Data Exchange (ETDEWEB)

Hong, Jintae; Ahn, Sungho; Joung, Changyoung; Kim, Kahye [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

Because highly pressurized (15.5 MPa) and highly heated (300 .deg. C) coolant is circulated through the test rig, it needs to seal out the instrumentation feed through part. In this case, general sealing method is brazing and several works have been carried out in nuclear fields. However, because high temperature is induced on the sealing plug and sheaths, it is easy to be broken due to oxidisation of the sheath during brazing process. In addition, because the brazing process is irreversible, if the brazing process fails, the whole inner assembly should be scrapped out. Another approach which uses graphite has been studied to seal out the instrumentation feed through part. In the study, graphite sealing is considered as a sealing method and the improvement of mechanical structure has been studied to improve the workability. To check the sealing performance of the instrumentation feed through part, a hydraulic pressure test and a helium leak test were carried out according to the ASME section III. The criterion of a hydraulic pressure test is 125% of the design pressure. In this study, because the design pressure of the pressure vessel is 17.5 MPa. the sealing criterion should be 21.9 MPa. Also, in a Helium leak test, the criterion is less than 5 Χ 10{sup -9} torr·liter/sec. At first, a Helium leak test was carried out. After eliminating Helium in the pressure vessel by evacuating the internal area of the pressure vessel up to 1 Χ 10{sup -3} torr using ASM 310, Helium detection test was carried out by spraying Helium gas at the top face of the top flange for 5 minutes. Fig. 4 shows the rate of Helium leakage is 2.4 Χ 10{sup -9} torr·liter/sec, and it satisfies the sealing performance criterion. A hydraulic pressure test was also carried out, and there was no leakage or pressure drop when the water in the pressure vessel is pressurized up to 22.5 MPa. The above test results show that graphite powder can seal out the instrumentation feed through part easily with

Validation of cleaning method for various parts fabricated at a Beryllium facility

Energy Technology Data Exchange (ETDEWEB)

Davis, Cynthia M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-12-15

This study evaluated and documented a cleaning process that is used to clean parts that are fabricated at a beryllium facility at Los Alamos National Laboratory. The purpose of evaluating this cleaning process was to validate and approve it for future use to assure beryllium surface levels are below the Department of Energy’s release limits without the need to sample all parts leaving the facility. Inhaling or coming in contact with beryllium can cause an immune response that can result in an individual becoming sensitized to beryllium, which can then lead to a disease of the lungs called chronic beryllium disease, and possibly lung cancer. Thirty aluminum and thirty stainless steel parts were fabricated on a lathe in the beryllium facility, as well as thirty-two beryllium parts, for the purpose of testing a parts cleaning method that involved the use of ultrasonic cleaners. A cleaning method was created, documented, validated, and approved, to reduce beryllium contamination.

STUDY ON ANTI-CRACKING PERFORMANCE EVALUATION METHOD OF STEEL FIBER REINFORCED CERAMSITE CONCRETE (SFRCC BASED ON PARTLY-RESTRAINED SHRINKAGE RING

Directory of Open Access Journals (Sweden)

Zhang Yi-fan

2017-12-01

Full Text Available In the study of crack resistance of steel fiber reinforced concrete in steel fiber on concrete deformation ability and prevent the Angle of the micro cracks, and the lack of overall evaluation on the performance of steel fiber reinforced concrete crack. By tinder barrier-free restrain some experimental research on steel fiber ceramsite concrete shrinkage ring crack resistance, and use the test results within the definition of steel ring strain from expansion to contraction cut-off age for early and late ages, and the ages of the cut-off point for the early and the late steel fiber ceramsite concrete anti-cracking performance evaluation. The results show that the anti-cracking properties of the steel fiber ceramic concrete are improved with the increase of steel fiber content.

Using a finite element pediatric hip model in clinical 2 evaluation - a feasibility study

DEFF Research Database (Denmark)

Skytte, T. L.; Mikkelsen, Lars Pilgaard; Sonne-Holm, Stig

2017-01-01

The paper describe a method to construct a finite element model of the hip joint of a child based on clinical recorded CT data. A model which can be used for diagnostic aid and pre-operative surgical evaluation. First part of this development is a feasibility study of this method. A scan...... to previous published experimental studies and computational models investigating the adult hip joint. Good correlation between the current model and previous models were found. The current case specific modeling technique may be a useful complement to the previously developed hip models....

Studying the Foreign Experience of Evaluating Intellectual Potential of Organizations

Directory of Open Access Journals (Sweden)

Pererva Petro G.

2016-01-01

Full Text Available The use of intellectual capital (IC is considered in developed countries as a strategic management tool for achievement of the organizations' success in innovative activities. The article is aimed at studying the foreign experience of evaluating intellectual potential of organizations and identifying directions for its advancement and use at the domestic enterprises to improve their innovative activity. An approach to capital structure has been developed, in which the following three parts are allocated: human capital, structural capital, capital of interactions. The proposed general model for research of IC in terms of firm or region allows to evaluate not only the potential, but also several important lines of communication, namely: industrial-technological, market-customer, business environment and society, commercial operations (technology, value creation and the overall development strategy. In the proposed version of studying the IC potential, analytics are combined with management of both strategy and development tactics, based on use of resources of intellectual capital. The scheme of development management through the system of the activities of influence is recommended as well. The end result of the analytical project work provides the development package, which is issued as a supporting document of development strategy. Evaluation of the development level of intellectual capital in the context of individual enterprises and of regional complex in general has been recommended to include in the Regional innovation system (RIS as one of its functional tasks

Evaluation of Candida Albicans Biofilm Formation on Various Parts ...

African Journals Online (AJOL)

2018-02-07

Feb 7, 2018 ... Aims: Candida albicans adhesion to any oral substrata is the first and essential stage in forming a .... kinds of resin, glass, and even metal surfaces.[14] ... various parts of implant materials [tissue level implant, bone level ...

Evaluation of polymer micro parts produced by additive manufacturing processes using vat photopolymerization method

DEFF Research Database (Denmark)

Davoudinejad, Ali; Pedersen, David Bue; Tosello, Guido

2017-01-01

Micro manufacturing scale feature production by Additive Manufacturing (AM) processes for the direct production of miniaturized polymer components is analysed in this work. The study characterizes the AM processes for polymer micro parts productions using the vat photopolymerization method...

Nevada Test Site flood inundation study: Part of US Geological Survey flood potential and debris hazard study, Yucca Mountain Site for USDOE, Office of Civilian Radioactive Waste Management

International Nuclear Information System (INIS)

Blanton, J.O. III.

1992-01-01

The Geological Survey (GS), as part of the Yucca Mountain Project (YMP), is conducting studies at Yucca Mountain, Nevada. The purposes of these studies are to provide hydrologic and geologic information to evaluate the suitability of Yucca Mountain for development as a high-level nuclear waste repository, and to evaluate the ability of the mined geologic disposal system (MGDS) to isolate the waste in compliance with regulatory requirements. The Bureau of Reclamation was selected by the GS as a contractor to provide probable maximum flood (PMF) magnitudes and associated inundation maps for preliminary engineering design of the surface facilities at Yucca Mountain. These PMF peak flow estimates and associated inundation maps are necessary for successful waste repository design and construction. The standard step method for backwater computations, incorporating the Bernouli energy equation and the results of the PMF study were chosen as the basis for defining the areal extent of flooding

Collect Available Creep-Fatigue Data and Study Existing Creep-Fatigue Evaluation Procedures for Grade 91 and Hastelloy XR

International Nuclear Information System (INIS)

Asayama, Tai; Tachibana, Yukio

2007-01-01

This report describes the results of investigation on Task 5 of DOE/ASME Materials Project based on a contract between ASME Standards Technology, LLC (ASME ST-LLC) and Japan Atomic Energy Agency (JAEA). Task 5 is to collect available creep-fatigue data and study existing creep-fatigue evaluation procedures for Grade 91 steel and Hastelloy XR. Part I of this report is devoted to Grade 91 steel. Existing creep-fatigue data were collected (Appendix A) and analyzed from the viewpoints of establishing a creep-fatigue procedure for VHTR design. A fair amount of creep-fatigue data has been obtained and creep-fatigue phenomena have been clarified to develop design standards mainly for fast breeder reactors. Following this, existing creep-fatigue procedures were studied and it was clarified that the creep-fatigue evaluation procedure of the ASME-NH has a lot of conservatisms and they were analyzed in detail from the viewpoints of the evaluation of creep damage of material. Based on the above studies, suggestions to improve the ASME-NH procedure along with necessary research and development items were presented. Part II of this report is devoted to Hastelloy XR. Existing creep-fatigue data used for development of the high temperature structural design guideline for High Temperature Gas-cooled Reactor (HTGR) were collected. Creep-fatigue evaluation procedure in the design guideline and its application to design of the intermediate heat exchanger (IHX) for High Temperature Engineering Test Reactor (HTTR) was described. Finally, some necessary research and development items in relation to creep-fatigue evaluation for Gen IV and VHTR reactors were presented.

Numerical Simulation of Projectile Impact on Mild Steel Armour Platesusing LS-DYNA, Part II: Parametric Studies

OpenAIRE

M. Raguraman; A. Deb; N. K. Gupta; D. K. Kharat

2008-01-01

In Part I of the current two-part series, a comprehensive simulation-based study of impact of jacketed projectiles on mild steel armour plates has been presented. Using the modelling procedures developed in Part I, a number of parametric studies have been carried out for the same mild steel plates considered in Part I and reported here in Part II. The current investigation includes determination of ballistic limits of a given target plate for different projectile diameters and impact velociti...

Modern spinal instrumentation. Part 1: Normal spinal implants

International Nuclear Information System (INIS)

Davis, W.; Allouni, A.K.; Mankad, K.; Prezzi, D.; Elias, T.; Rankine, J.; Davagnanam, I.

2013-01-01

The general radiologist frequently encounters studies demonstrating spinal instrumentation, either as part of the patient's postoperative evaluation or as incidental to a study performed for another purpose. There are various surgical approaches and devices used in spinal surgery with an increased understanding of spinal and spinal implant biomechanics drives development of modern fixation devices. It is, therefore, important that the radiologist can recognize commonly used devices and identify their potential complications demonstrated on imaging. The aim of part 1 of this review is to familiarize the reader with terms used to describe surgical approaches to the spine, review the function and normal appearances of commonly used instrumentations, and understand the importance of the different fixation techniques. The second part of this review will concentrate on the roles that the different imaging techniques play in assessing the instrumented spine and the recognition of complications that can potentially occur.

Earthquakes in El Salvador: a descriptive study of health concerns in a rural community and the clinical implications, part I.

Science.gov (United States)

Woersching, Joanna C; Snyder, Audrey E

2003-01-01

This is the first article in a series that evaluates the health concerns of people living in a Salvadoran rural community after major earthquakes. Part I reviews the background, methods, and results of post-earthquake conditions with regards to healthcare, access to healthcare, housing, food, water and sanitation. Part II reviews the implications of these results and recommendations for improvements within the community. Part III investigates the psychosocial and mental health consequences of the earthquakes and provides suggestions for improved mental health awareness, assessment, and intervention. El Salvador experienced 2 major earthquakes in January and February 2001. This study evaluates the effects of the earthquakes on the health practices in the rural town of San Sebastian. The research was conducted with use of a convenience sample survey of subjects affected by the earthquakes. The sample included 594 people within 100 households. The 32-question survey assessed post-earthquake conditions in the areas of health care and access to care, housing, food and water, and sanitation. Communicable diseases affected a number of family members. After the earthquakes, 38% of households reported new injuries, and 79% reported acute exacerbations of chronic illness. Rural inhabitants were 30% more likely to have an uninhabitable home than were urban inhabitants. Concerns included safe housing, water purification, and waste elimination. The findings indicate a need for greater public health awareness and community action to adapt living conditions after a disaster and prevent the spread of communicable disease.

Nuclear plant power up-rate study: feedwater heater evaluations

International Nuclear Information System (INIS)

Svensson, Eric; Catapano, Michael; Coakley, Michael; Thomas, Dan

2014-01-01

Given today's nuclear industry business climate, it has become common for Utility companies to consider increasing unit capacities through turbine replacement and power up-rates. An integral part of the studies conducted by many towards this end, involve the generation of a set of turbine cycle heat balances with predicted performance parameters for the up-rated condition. Once these tentative operating values are established, it becomes necessary to evaluate the suitability of the existing components within each system to ensure they are capable of continued safe and reliable operation. The ultimate cost for the up-rate, including the cost for any major required modifications or significant replacements is weighed against increased revenue generated from the up-rate over time. Exelon's Peach Bottom Atomic Power Station (PBAPS) is currently planning for an Extended Power up-rate (EPU) for both units. To ensure the existing Feedwater Heaters (FWH) could maintain the operating and transient response margins at the EPU condition, an engineering study was conducted. Powerfect Inc. in conjunction with SPX Heat Transfer LLC were contracted to provide engineering services to analyze the design, thermal performance, reliability and operating conditions at projected EPU conditions. Specifically, to address the following with regard to the station's Feedwater Heaters (FWHs): 1. Evaluate Drain Cooler (DC) Velocities - including zone inlet velocity, cross and window velocities and outlet velocities. 2. Evaluate Drain Cooler Zone Pressure Drop for effect on drain cooler margins to flashing. 3. Evaluate differential pressure allowable across the pass partition plate. 4. Evaluate Drain Cooler Tube Vibration Potential. 5. Perform detailed steam dome velocity calculations. The goal of the study was to identify the most susceptible areas within the heaters for problems and potential failures when operating at the higher duty of the EPU condition for the remaining life

The Use of Books and Libraries by Part-Time Business Studies Students at a Polytechnic: A Follow-up Study.

Science.gov (United States)

Payne, Philip

To study the effect on library use, of additional expenditure on accounting textbooks needed by part-time business students, a study was conducted in the spring of 1980 at the City of London Polytechnic. Three techniques were used: (1) a questionnaire distributed to all part-time students in the Accountancy Department and, as a control group, all…

Is networking different with part-time working colleagues? A study of medical teams.

NARCIS (Netherlands)

Heiligers, P.; Jong, J. de; Groenewegen, P.; Hingstman, L.

2007-01-01

Changes in work arrangements like the introduction of part-time work can affect both formal and informal organization. This study will focus on informal networks amongst teams of medical specialists, some but not all of which include part-time workers. Are there notable differences in the structure

An economic evaluation of a participatory ergonomics process in an auto parts manufacturer.

Science.gov (United States)

Tompa, Emile; Dolinschi, Roman; Laing, Andrew

2009-01-01

We assess the costs and consequences of a participatory ergonomics process at a Canadian car parts manufacturer from the perspective of the firm. Regression modeling was used with interrupted time series data to assess the impact of the process on several health measures. Consequences were kept in natural units for cost-effectiveness analysis, and translated into monetary units for cost-benefit analysis. The duration of disability insurance claims and the number of denied workers' compensation claims was significantly reduced. The cost-effectiveness ratio is $12.06 per disability day averted. The net present value is $244,416 for a 23-month period with a benefit-to-cost ratio of 10.6, suggesting that the process was worth undertaking (monetary units in 2001 Canadian dollars). Our findings emphasize the importance of considering a range of outcomes when evaluating an occupational health and safety intervention. Participatory ergonomics process can be cost-effective for a firm.

Evaluation of a fissure sealant program as part of community-based teaching and training.

Science.gov (United States)

van Wyk, Philippus J; Kroon, Jeroen; White, John G

2004-01-01

Since 1995 the Department of Community Dentistry of the University of Pretoria has been involved in the rendering of mobile primary oral health care services to children in the Hammanskraal area of Gauteng, South Africa, as part of their students' community-based training. Mokonyama Primary School was identified as the first school where a primary oral health care service could be rendered. The objective of this study was to evaluate the impact (outcomes) of a fissure sealant program on the dentition status of the school children. Seven years after the implementation of the program, the dentition status of children at Mokonyama was compared with that of a comparable group of children from the same area who were not exposed to the program. The results showed that the decayed, missing, and filled teeth in the primary dentition (dmft) in the six-year-old group in Mokonyama (1.74) did not differ significantly from the dmft (1.43) of the control group (p = 0.49). The decayed, missing, and filled teeth in the permanent dentition (DMFT) of 0.59 for the fifteen-year-old group in Mokonyama, however, differed significantly (p = 0.0001) from the DMFT of the control group (2.38). Fifteen-year-old children in Mokonyama had 75.2 percent fewer caries than their counterparts in the control group.

Geologic and hydrologic characterization and evaluation of the Basin and Range Province relative to the disposal of high-level radioactive waste: Part I, Introduction and guidelines

Science.gov (United States)

Bedinger, M.S.; Sargent, Kenneth A.; Reed, J.E.

1984-01-01

The U.S. Geological Survey's program for geologic and hydrologic evaluation of physiographic provinces to identify areas potentially suitable for locating repository sites for disposal of high-level nuclear wastes was announced to the Governors of the eight States in the Basin and Range Province on May 5, 1981. Representatives of Arizona, California, Idaho, New Mexico, Nevada, Oregon, Texas, and Utah, were invited to cooperate with the Federal Government in the evaluation process. Each Governor was requested to nominate an Earth scientist to represent the State in a province working group composed of State and U.S. Geological Survey representatives. This report, Part I of a three-part report, provides the background, introduction and scope of the study. This part also includes a discussion of geologic and hydrologic guidelines that will be used in the evaluation process and illustrates geohydrologic environments and the effect of individual factors in providing multiple natural barriers to radionuclide migration.Part II is a reconnaissance characterization of the geologic and hydrologic factors to be used in the initial screening of the Basin and Range Province. Part III will be the initial evaluation of the Province and will identify regions that appear suitable for further study.The plan for study of the Province includes a stepwise screening process by which successively smaller land units are considered in increasing detail. Each step involves characterization of the geology and hydrology and selection of subunits for more intensive characterization. Selection of subunits for further study is by evaluation of geologic and hydrologic conditions following a set of guidelines. By representation on the Province Working Group, the States participate in a consultation and review role in: (1) Establishing geologic and hydrologic guidelines, and (2) characterizing and evaluating the Province. The States also participate in compilation of geologic and hydrologic data

The WACMOS-ET project – Part 2: Evaluation of global terrestrial evaporation data sets

KAUST Repository

Miralles, D. G.; Jimé nez, C.; Jung, M.; Michel, D.; Ershadi, Ali; McCabe, Matthew; Hirschi, M.; Martens, B.; Dolman, A. J.; Fisher, J. B.; Mu, Q.; Seneviratne, S. I.; Wood, E. F.; Fernaì ndez-Prieto, D.

2015-01-01

The WAter Cycle Multi-mission Observation Strategy – EvapoTranspiration (WACMOS-ET) project aims to advance the development of land evaporation estimates on global and regional scales. Its main objective is the derivation, validation, and intercomparison of a group of existing evaporation retrieval algorithms driven by a common forcing data set. Three commonly used process-based evaporation methodologies are evaluated: the Penman–Monteith algorithm behind the official Moderate Resolution Imaging Spectroradiometer (MODIS) evaporation product (PM-MOD), the Global Land Evaporation Amsterdam Model (GLEAM), and the Priestley–Taylor Jet Propulsion Laboratory model (PT-JPL). The resulting global spatiotemporal variability of evaporation, the closure of regional water budgets, and the discrete estimation of land evaporation components or sources (i.e. transpiration, interception loss, and direct soil evaporation) are investigated using river discharge data, independent global evaporation data sets and results from previous studies. In a companion article (Part 1), Michel et al. (2016) inspect the performance of these three models at local scales using measurements from eddy-covariance towers and include in the assessment the Surface Energy Balance System (SEBS) model. In agreement with Part 1, our results indicate that the Priestley and Taylor products (PT-JPL and GLEAM) perform best overall for most ecosystems and climate regimes. While all three evaporation products adequately represent the expected average geographical patterns and seasonality, there is a tendency in PM-MOD to underestimate the flux in the tropics and subtropics. Overall, results from GLEAM and PT-JPL appear more realistic when compared to surface water balances from 837 globally distributed catchments and to separate evaporation estimates from ERAInterim and the model tree ensemble (MTE). Nonetheless, all products show large dissimilarities during conditions of water stress and drought and

The WACMOS-ET project – Part 2: Evaluation of global terrestrial evaporation data sets

KAUST Repository

Miralles, D. G.

2015-10-19

The WAter Cycle Multi-mission Observation Strategy – EvapoTranspiration (WACMOS-ET) project aims to advance the development of land evaporation estimates on global and regional scales. Its main objective is the derivation, validation, and intercomparison of a group of existing evaporation retrieval algorithms driven by a common forcing data set. Three commonly used process-based evaporation methodologies are evaluated: the Penman–Monteith algorithm behind the official Moderate Resolution Imaging Spectroradiometer (MODIS) evaporation product (PM-MOD), the Global Land Evaporation Amsterdam Model (GLEAM), and the Priestley–Taylor Jet Propulsion Laboratory model (PT-JPL). The resulting global spatiotemporal variability of evaporation, the closure of regional water budgets, and the discrete estimation of land evaporation components or sources (i.e. transpiration, interception loss, and direct soil evaporation) are investigated using river discharge data, independent global evaporation data sets and results from previous studies. In a companion article (Part 1), Michel et al. (2016) inspect the performance of these three models at local scales using measurements from eddy-covariance towers and include in the assessment the Surface Energy Balance System (SEBS) model. In agreement with Part 1, our results indicate that the Priestley and Taylor products (PT-JPL and GLEAM) perform best overall for most ecosystems and climate regimes. While all three evaporation products adequately represent the expected average geographical patterns and seasonality, there is a tendency in PM-MOD to underestimate the flux in the tropics and subtropics. Overall, results from GLEAM and PT-JPL appear more realistic when compared to surface water balances from 837 globally distributed catchments and to separate evaporation estimates from ERAInterim and the model tree ensemble (MTE). Nonetheless, all products show large dissimilarities during conditions of water stress and drought and

Coal-fired power materials - Part II

Energy Technology Data Exchange (ETDEWEB)

Viswanathan, V.; Purgert, R.; Rawls, P. [Electric Power Research Institute, Palo Alto, CA (United States)

2008-09-15

Part 1 discussed some general consideration in selection of alloys for advanced ultra supercritical (USC) coal-fired power plant boilers. This second part covers results reported by the US project consortium, which has extensively evaluated the steamside oxidation, fireside corrosion, and fabricability of the alloys selected for USC plants. 3 figs.

A Study on Infrared Local Heat Treatment for AA5083 to Improve Formability and Automotive Part Forming

Science.gov (United States)

Lee, Eun-Ho; Yang, Dong-Yol; Ko, SeJin

2017-10-01

Automotive industries are increasingly employing aluminum alloys for auto parts to reduce vehicle weight. However, the low formability of aluminum alloys has been an obstacle to their application. To resolve the formability problem, some studies involving heat treatments under laboratory conditions have been reported. However, for industrial applications, the heat treatment sequence, heating energy efficiency, and a commercial part test should be studied. This work shows an infrared (IR) local heat treatment, heating only small areas where the heat treatment is required, for an aluminum alloy to improve the formability with a reduction of heating energy. The experiment shows that the formability drastically increases when the aluminum alloy is heat treated between two forming stages, referred to as intermediate heat treatment. The microstructures of the test pieces are evaluated to identify the cause of the increase in the formability. For an industrial application, an aluminum tailgate, which cannot be manufactured without heat treatment, was successfully manufactured by the IR local heat treatment with a reduction of energy. A simulation was also conducted with a stress-based forming limit diagram, which is not affected by the strain path and heat treatment histories. The simulation gives a good prediction of the formability improvement.

Joint optimization of redundancy level and spare part inventories

International Nuclear Information System (INIS)

Sleptchenko, Andrei; Heijden, Matthieu van der

2016-01-01

We consider a “k-out-of-N” system with different standby modes. Each of the N components consists of multiple part types. Upon failure, a component can be repaired within a certain time by switching the failed part by a spare, if available. We develop both an exact and a fast approximate analysis to compute the system availability. Next, we jointly optimize the component redundancy level with the inventories of the various spare parts. We find that our approximations are very accurate and suitable for large systems. We apply our model to a case study at a public organization in Qatar, and find that we can improve the availability-to-cost ratio by reducing the redundancy level and increasing the spare part inventories. In general, high redundancy levels appear to be useful only when components are relatively cheap and part replacement times are high. - Highlights: • We analyze a redundant system (k-out-of-N) with multiple parts and spares. • We jointly optimize the redundancy level and the spare part inventories. • We develop an exact method and an approximation to evaluate the system availability. • Adding spare parts and reducing the redundancy level cuts cost by 50% in a case study. • The availability is not very sensitive to the shape of the failure time distribution.

Can legal research benefit from evaluation studies?

Directory of Open Access Journals (Sweden)

Frans L. Leeuw

2011-01-01

Full Text Available The article describes what evaluation studies have to offer to legal research. Several cases and types of evaluations are presented, in relation to legal or semi-legal questions. Also, a short overview of the contemporary history of evaluation studies is presented. Finally, it will address the question of how to ensure that in legal research and in legal training attention is paid to theories, designs and methods of evaluation studies.

Mechanism of Rock Burst Occurrence in Specially Thick Coal Seam with Rock Parting

Science.gov (United States)

Wang, Jian-chao; Jiang, Fu-xing; Meng, Xiang-jun; Wang, Xu-you; Zhu, Si-tao; Feng, Yu

2016-05-01

Specially thick coal seam with complex construction, such as rock parting and alternative soft and hard coal, is called specially thick coal seam with rock parting (STCSRP), which easily leads to rock burst during mining. Based on the stress distribution of rock parting zone, this study investigated the mechanism, engineering discriminant conditions, prevention methods, and risk evaluation method of rock burst occurrence in STCSRP through setting up a mechanical model. The main conclusions of this study are as follows. (1) When the mining face moves closer to the rock parting zone, the original non-uniform stress of the rock parting zone and the advancing stress of the mining face are combined to intensify gradually the shearing action of coal near the mining face. When the shearing action reaches a certain degree, rock burst easily occurs near the mining face. (2) Rock burst occurrence in STCSRP is positively associated with mining depth, advancing stress concentration factor of the mining face, thickness of rock parting, bursting liability of coal, thickness ratio of rock parting to coal seam, and difference of elastic modulus between rock parting and coal, whereas negatively associated with shear strength. (3) Technologies of large-diameter drilling, coal seam water injection, and deep hole blasting can reduce advancing stress concentration factor, thickness of rock parting, and difference of elastic modulus between rock parting and coal to lower the risk of rock burst in STCSRP. (4) The research result was applied to evaluate and control the risk of rock burst occurrence in STCSRP.

Study of the dairy characters of lactating Murrah buffaloes on the basis of body parts measurements

Directory of Open Access Journals (Sweden)

Sandeep Dhillod

2017-01-01

Full Text Available Aim: The aim of the study was to correlate the milk yield of Murrah buffaloes with certain body parts measurements. Materials and Methods: A total of 70 lactating Murrah buffaloes were selected from Buffalo Farm, Lala Lajpat Rai University of Veterinary and Animal Science, Hisar and were randomly selected in a range from first to fifth parity. Traits studied were 305 days milk yield (MY, body weight (BW, body length (BL, muzzle width (MW, height at wither (HW, abdominal girth (AG, chest girth (CG, body depth fore, body depth rear, hip bone distance (HBD, pin bone distance (PBD, skin thickness (STK, and tail length (TL. Data were collected and statically analyzed by Pearson’s correlation method. Result: The result of this study showed that Murrah buffaloes had the average 2604.8±39.5 kg for MY, 556.1±4.9 kg for BW, and 152.2±0.8 cm for BL. This study showed that buffaloes had positive significant (p<0.05 correlation between MY and BW (0.26. Highly significant (p<0.01 correlation was observed between MY and AG (0.64, MW (0.42. Significant (p<0.01 negative correlation was observed between MY and STK (−0.79. Different body part measurements (BW, BL, HW, AG, CG, MW, TL, BD, PBD, HBD, STK were significantly correlated with each other. Conclusion: This study can be helpful as a selection tool to enhance and evaluate the production potential by setting standards of Murrah buffalo breed. BW, abdominal growth, muzzle thickness, and STK were found key factors while selecting a dairy Murrah buffalo.

Clinical pharmacy academic career transitions: Viewpoints from the fieldPart 1: Understanding feedback, evaluation, and advancement.

Science.gov (United States)

Blackmer, Allison B; Thompson, Angela M; Jeffres, Meghan N; Glode, Ashley E; Mahyari, Nila; Thompson, Megan

2018-02-01

The six authors of this commentary series, who have recently transitioned into or within an academic career, discuss challenging aspects of an academic career change. This is a three-part commentary series that explores select challenges: 1) feedback, evaluation and advancement; 2) understanding and balancing of distribution of effort; 3) learning how and when to say yes. Faculty, or those interested in pursuing a career in pharmacy academia, can refer to this commentary series as a reference. Schools of pharmacy may utilize this as a tool for new faculty members during orientation in order to ensure smooth integration into the academic environment. Copyright © 2017 Elsevier Inc. All rights reserved.

Evaluation of geophysical borehole studies

International Nuclear Information System (INIS)

Brotzen, O.; Duran, O.; Magnusson, K.Aa.

Four studies concerning geophysical investigations and TV inspection in boreholes in connection with KBS studies at Finnsjoe, Karlshamn, Kraakemaala and Stripa and PRAV's studies at Studsvik have been evaluated. This has led to proposals concerning the choice of instruments and methods for future studies and a review of future work required. The evaluation has shown that the following borehole measurements are of primary interest in the continued work: Determinations of temperature and resistivity of the borehole liquid, resistance and resistivity measurements, SP, Sonic, Caliper and VLF. TV inspection, IP and gamma-gamma should also be included in the arsenal of available test methods.(author)

Evaluation of residual stresses in welded part using hard synchrotron x-rays

International Nuclear Information System (INIS)

Suzuki, Kenji; Shobu, Takahisa; Shiro, Ayumi; Zhang Shuoyuan

2013-01-01

The spiral slit-system and DSTM (diffraction spot trace method) are under development in order to evaluate internal stresses of materials with coarse grains. The spiral slit-system was improved so that the length of the gauge volume is independent of the diffraction angle. The bending stress in the specimen with coarse grains was measured in order to confirm performance of this advanced spiral slit-system. The distribution of the measured bending stress coincided with the applied bending stress. As a result, it was proved that the combination of the advanced spiral slit-system and the DSTM is useful for the internal stress measurement of materials with coarse grains. The welded specimen of a Mg-alloy plate was prepared by melt-run with TIG welding. The residual stress map in the cross-section of the specimen was made using the DSTM. On the other hand, the residual stresses of the welded specimen were simulated by a finite element method. Although the measured residual stresses were similar to the simulated results, the residual stresses due to extrusion were measured also using the DSTM. The DSTM is an excellent technique for the stress measurement of weld parts. (author)

Analysis and evaluation of GAVE chains. Part 3 of 3. Appendices; Analyse en evaluatie van GAVE-ketens. Deel 3 van 3. Appendices

Energy Technology Data Exchange (ETDEWEB)

Bosma, W.J.P. [Arthur D. Little International, Rotterdam (Netherlands)

1999-12-01

The final report (part 2) contains the detailed findings of the analysis, evaluation, and integration of Novem GAVE options and aims at the reader who is interested in the detailed findings, as well as an overview of the results. For readers who are mainly interested in the high-level results, and are comfortable with Dutch, there is a short text summary of our results, entitled 'Analyse en evaluatie van GAVE-ketens, management summary' (part 1). These appendices is for readers who are interested in the underlying data and detailed assumptions. 70 refs.

The 'realities' of part-time nursing: a grounded theory study.

Science.gov (United States)

Jamieson, Lynn N; Williams, Leonie Mosel; Lauder, William; Dwyer, Trudy

2008-10-01

To develop a theory that explains the 'realities' of part-time nursing. While little is known about the phenomenon of part-time nursing, increasing numbers of nurses work in part-time employment. Grounded theory. The problem that part-time nurses shared was an inability to achieve their personal optimal nursing potential. Motivators to work part-time, employment hours, specialty, individual and organizational factors formed contextual conditions that led to this problem. Part-time nurses responded to the challenges through a process of adaptation and adjustment. Harnessing the full productive potential of part-time nurses requires support to limit the difficulties that they encounter. The developed theory provides a valuable guide to managerial action. Nurse Managers need to consider the developed substantive theory when planning and managing nursing workforces.

[The external evaluation of study quality: the role in maintaining the reliability of laboratory information].

Science.gov (United States)

Men'shikov, V V

2013-08-01

The external evaluation of quality of clinical laboratory examinations was gradually introduced in USSR medical laboratories since 1970s. In Russia, in the middle of 1990 a unified all-national system of external evaluation quality was organized known as the Federal center of external evaluation of quality at the basis of laboratory of the state research center of preventive medicine. The main positions of policy in this area were neatly formulated in the guidance documents of ministry of Health. Nowadays, the center of external evaluation of quality proposes 100 and more types of control studies and permanently extends their specter starting from interests of different disciplines of clinical medicine. The consistent participation of laboratories in the cycles of external evaluation of quality intrinsically promotes improvement of indicators of properness and precision of analysis results and increases reliability of laboratory information. However, a significant percentage of laboratories does not participate at all in external evaluation of quality or takes part in control process irregularly and in limited number of tests. The managers of a number of medical organizations disregard the application of the proposed possibilities to increase reliability of laboratory information and limit financing of studies in the field of quality control. The article proposes to adopt the national standard on the basis of ISO 17043 "Evaluation of compliance. The common requirements of professional competence testing".

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 2. GSFLS visit findings and evaluations. Interim report

International Nuclear Information System (INIS)

1978-01-01

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. This report describes a global framework that evaluates spent fuel disposition requirements, influencing factors and strategies. A broad sampling of foreign governmental officials, electric utility spokesmen and nuclear power industry officials responsible for GSFLS policies, plans and programs were surveyed as to their views with respect to national and international GSFLS related considerations. The results of these GSFLS visit findings are presented herein. These findings were then evaluated in terms of technical, institutional and legal/regulatory implications. The GSFLS evaluations, in conjunction with perceived US spent fuel objectives, formed the basis for selecting a set of GSFLS strategies which are reported herein

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 2. GSFLS visit findings and evaluations. Interim report

Energy Technology Data Exchange (ETDEWEB)

None

1978-01-31

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. This report describes a global framework that evaluates spent fuel disposition requirements, influencing factors and strategies. A broad sampling of foreign governmental officials, electric utility spokesmen and nuclear power industry officials responsible for GSFLS policies, plans and programs were surveyed as to their views with respect to national and international GSFLS related considerations. The results of these GSFLS visit findings are presented herein. These findings were then evaluated in terms of technical, institutional and legal/regulatory implications. The GSFLS evaluations, in conjunction with perceived US spent fuel objectives, formed the basis for selecting a set of GSFLS strategies which are reported herein.

What and How Are We Evaluating? Meta-Evaluation Study of the NASA Innovations in Climate Education (NICE) Portfolio

Science.gov (United States)

Martin, A. M.; Barnes, M. H.; Chambers, L. H.; Pippin, M. R.

2013-12-01

As part of NASA's Minority University Research and Education Program (MUREP), the NASA Innovations in Climate Education (NICE) project at Langley Research Center has funded 71 climate education initiatives since 2008. The funded initiatives span across the nation and contribute to the development of a climate-literate public and the preparation of a climate-related STEM workforce through research experiences, professional development opportunities, development of data access and modeling tools, and educational opportunities in both K-12 and higher education. Each of the funded projects proposes and carries out its own evaluation plan, in collaboration with external or internal evaluation experts. Using this portfolio as an exemplar case, NICE has undertaken a systematic meta-evaluation of these plans, focused primarily on evaluation questions, approaches, and methods. This meta-evaluation study seeks to understand the range of evaluations represented in the NICE portfolio, including descriptive information (what evaluations, questions, designs, approaches, and methods are applied?) and questions of value (do these evaluations meet the needs of projects and their staff, and of NASA/NICE?). In the current climate, as federal funders of climate change and STEM education projects seek to better understand and incorporate evaluation into their decisions, evaluators and project leaders are also seeking to build robust understanding of program effectiveness. Meta-evaluations like this provide some baseline understanding of the current status quo and the kinds of evaluations carried out within such funding portfolios. These explorations are needed to understand the common ground between evaluative best practices, limited resources, and agencies' desires, capacity, and requirements. When NASA asks for evaluation of funded projects, what happens? Which questions are asked and answered, using which tools? To what extent do the evaluations meet the needs of projects and

Evaluation and processing of covariance data

International Nuclear Information System (INIS)

Wagner, M.

1993-01-01

These proceedings of a specialists'meeting on evaluation and processing of covariance data is divided into 4 parts bearing on: part 1- Needs for evaluated covariance data (2 Papers), part 2- generation of covariance data (15 Papers), part 3- Processing of covariance files (2 Papers), part 4-Experience in the use of evaluated covariance data (2 Papers)

Evaluation of biodiesel fuel and a diesel oxidation catalyst in an underground metal mine : Part 3 : Biological and chemical characterization

Energy Technology Data Exchange (ETDEWEB)

Bagley, S.T. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Biological Sciences; Gratz, L.D. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Mechanical Engineering-Engineering Mechanics

1998-07-24

A collaborative, international, multidisciplinary effort led to the evaluation of the effects of using a 50 per cent biodiesel fuel blend and an advanced-type diesel oxidation catalyst (DOC) on underground metal mine air quality. The location selected for the field trials was the Creighton Mine 3 in Sudbury, Ontario, operated by Inco. Specifically, part 3 of the study evaluated the effects of using a biodiesel blend fuel on potentially health-related diesel particulate matter (DPM) components, with a special emphasis on polynuclear aromatic hydrocarbons (PAH), nitro-PAH, and mutagenic activity. High volume sampler filters containing submicrometer particles were examined, and comparisons made for DPM and DPM component concentrations. The downwind concentrations of DPM were reduced by 20 per cent with the use of the blend biodiesel fuel as compared with the number 2 diesel fuel with an advanced-type DOC. Significant reductions in solids (up to 30 per cent) and up to 75 per cent in the case of mutagenic activity were noted. Significant reductions in the DPM components potentially harmful to human health should result from the use of this blended fuel combined with an advanced-type DOC in an underground environment. 23 refs., 19 tabs.

Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 1. Final report

Energy Technology Data Exchange (ETDEWEB)

1994-04-30

As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID, is proceeding with a more detailed evaluation of the design`s capability for plutonium disposition.

Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 2. Final report

Energy Technology Data Exchange (ETDEWEB)

1994-04-30

As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID, is proceeding with a more detailed evaluation of the design`s capability for plutonium disposition.

Study on team evaluation. Team process model for team evaluation

International Nuclear Information System (INIS)

Sasou Kunihide; Ebisu, Mitsuhiro; Hirose, Ayako

2004-01-01

Several studies have been done to evaluate or improve team performance in nuclear and aviation industries. Crew resource management is the typical example. In addition, team evaluation recently gathers interests in other teams of lawyers, medical staff, accountants, psychiatrics, executive, etc. However, the most evaluation methods focus on the results of team behavior that can be observed through training or actual business situations. What is expected team is not only resolving problems but also training younger members being destined to lead the next generation. Therefore, the authors set the final goal of this study establishing a series of methods to evaluate and improve teams inclusively such as decision making, motivation, staffing, etc. As the first step, this study develops team process model describing viewpoints for the evaluation. The team process is defined as some kinds of power that activate or inactivate competency of individuals that is the components of team's competency. To find the team process, the authors discussed the merits of team behavior with the experienced training instructors and shift supervisors of nuclear/thermal power plants. The discussion finds four team merits and many components to realize those team merits. Classifying those components into eight groups of team processes such as 'Orientation', 'Decision Making', 'Power and Responsibility', 'Workload Management', 'Professional Trust', 'Motivation', 'Training' and 'staffing', the authors propose Team Process Model with two to four sub processes in each team process. In the future, the authors will develop methods to evaluate some of the team processes for nuclear/thermal power plant operation teams. (author)

Numerical simulation of projectile impact on mild steel armour plates using LS-DYNA, Part II: Parametric studies

OpenAIRE

Raguraman, M; Deb, A; Gupta, NK; Kharat, DK

2008-01-01

In Part I of the current two-part series, a comprehensive simulation-based study of impact of Jacketed projectiles on mild steel armour plates has been presented. Using the modelling procedures developed in Part I, a number of parametric studies have been carried out for the same mild steel plates considered in Part I and reported here in Part II. The current investigation includes determination of ballistic limits of a given target plate for different projectile diameters and impact velociti...

Polishing ponds as tertiary treatment of municipal wastewater. Part one: Full scale experimental evaluation of effects on effluent characteristic; Stagni biologici nel trattamento terziario dei liquami urbani. Parte I: Valutazione sperimentale a scala reale degli effetti sulle caratteristiche all`effluente finale

Energy Technology Data Exchange (ETDEWEB)

Tatano, Fabio

1997-04-01

The application of polishing ponds as tertiary treatment of municipal wastewater, is quite common in Germany. Nowadays, the wastewater treatment plants in the most industrialized Countries achieve high treatment efficiencies in the biological phase; then, it seems necessary to study - in these plants - the treatment efficiencies and the improvements achievable with polishing ponds inserted as tertiary treatment. This Part One of the paper describes the results of a full scale experimental evaluation of the treatment efficiency of the polishing ponds in a wastewater treatment plant situated in the Ruhr River Region (Germany).

Treatability studies performed in support of an engineering evaluation/cost analysis

International Nuclear Information System (INIS)

Myers, J.M.; Mueller, J.P.; Sundquist, J.A.; Moore, G.W.

1995-01-01

The Southern Shipbuilding Corporation (SSC) site is located on 54 acres of wooded land adjacent to Bayou Bonfouca, approximately 1.8 miles downstream of the Bayou Bonfouca National Priorities List (NPL) Superfund site in Slidell, St. Tammany Parish, Louisiana. Two one-acre, impoundments on the SSC site were used to store wastes generated from vessel cleaning. Wastes stored in the impoundments are migrating into Bayou Bonfouca, which empties into Lake Pontchartrain. In addition, the impoundments are frequently invaded by flood waters. The US EPA Emergency Response Branch (EPA-ERB) performed a site investigation which indicated that the majority of the contamination is petroleum-related and that the compounds of concern are polycyclic aromatic hydrocarbons (PARs). The wastes are generally contained with the two impoundments and surrounding soils. As part of an Engineering Evaluation/Cost Basis (EE/CA) of potential response action alternatives, four treatability studies were performed. A thermal treatment (incineration) study was performed at the EPA's Incineration Research Facility (IRF). Biodegradation remedy selection feasibility assessment was conducted on-site. A remedy screening soil washing study was also performed by TAT. A solidification/stabilization (S/S) study was conducted through EPA's Risk Reduction Engineering Laboratory (RREL) to ascertain if the PAHs could be immobilized within a solid matrix. Experimental objectives, dead methodology and conclusions for these studies are presented as they relate to potential response actions being evaluated at the SSC site

Geophysical and geochemical regional evaluation and geophysical model for uranium exploration in the western part of Yanliao region

International Nuclear Information System (INIS)

Liu Tengyao; Cui Huanmin; Chen Guoliang; Zhai Yugui

1992-01-01

The western part of Yanliao region is an important uranium metallogenic region. This paper summarizes the regional geophysical model for uranium exploration composed of prediction model for favourable area of mineralization and evaluation model for anomalies on the basis of aeromagnetic and aeroradiometric data interpretation and analysis of the data from carborane and ground gamma spectrometric survey, high accurate magnetic survey, VLF survey and α-collected film survey in mult-displiary research work. The prospective prediction for uranium metallogenesis in this region was also conducted

MIRD methodology. Part 1

International Nuclear Information System (INIS)

Rojo, Ana M.

2004-01-01

This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

Mapping sequences by parts

Directory of Open Access Journals (Sweden)

Guziolowski Carito

2007-09-01

Full Text Available Abstract Background: We present the N-map method, a pairwise and asymmetrical approach which allows us to compare sequences by taking into account evolutionary events that produce shuffled, reversed or repeated elements. Basically, the optimal N-map of a sequence s over a sequence t is the best way of partitioning the first sequence into N parts and placing them, possibly complementary reversed, over the second sequence in order to maximize the sum of their gapless alignment scores. Results: We introduce an algorithm computing an optimal N-map with time complexity O (|s| × |t| × N using O (|s| × |t| × N memory space. Among all the numbers of parts taken in a reasonable range, we select the value N for which the optimal N-map has the most significant score. To evaluate this significance, we study the empirical distributions of the scores of optimal N-maps and show that they can be approximated by normal distributions with a reasonable accuracy. We test the functionality of the approach over random sequences on which we apply artificial evolutionary events. Practical Application: The method is illustrated with four case studies of pairs of sequences involving non-standard evolutionary events.

Application of artificial intelligence (AI) concepts to the development of space flight parts approval model

Science.gov (United States)

Krishnan, Govindarajapuram Subramaniam

1997-12-01

The National Aeronautics & Space Administration (NASA), the European Space Agency (ESA), and the Canadian Space Agency (CSA) missions involve the performance of scientific experiments in Space. Instruments used in such experiments are fabricated using electronic parts such as microcircuits, inductors, capacitors, diodes, transistors, etc. For instruments to perform reliably the selection of commercial parts must be monitored and strictly controlled. The process used to achieve this goal is by a manual review and approval of every part used to build the instrument. The present system to select and approve parts for space applications is manual, inefficient, inconsistent, slow and tedious, and very costly. In this dissertation a computer based decision support model is developed for implementing this process using artificial intelligence concepts based on the current information (expert sources). Such a model would result in a greater consistency, accuracy, and timeliness of evaluation. This study presents the methodology of development and features of the model, and the analysis of the data pertaining to the performance of the model in the field. The model was evaluated for three different part types by experts from three different space agencies. The results show that the model was more consistent than the manual evaluation for all part types considered. The study concludes with the cost and benefits analysis of implementing the models and shows that implementation of the model will result in significant cost savings. Other implementation details are highlighted.

Ultrasound techniques in the evaluation of the mediastinum, part 2

DEFF Research Database (Denmark)

Jenssen, Christian; Annema, Jouke Tabe; Clementsen, Paul

2015-01-01

and inoperable lung cancer (e.g., surgery vs. combined chemoradiation therapy). Tissue sampling is often indicated for accurate nodal staging. Recent international lung cancer staging guidelines clearly state that endosonography should be the initial tissue sampling test over surgical staging. Mediastinal nodes...... can be sampled from the airways [endobronchial ultrasound combined with transbronchial needle aspiration (EBUS-TBNA)] or the esophagus [endoscopic ultrasound fine needle aspiration (EUS-FNA)]. EBUS and EUS have a complementary diagnostic yield and in combination virtually all MLNs can be biopsied...... and mediastinal staging of lung cancer. A specific emphasis will be on learning mediastinal endosonography. Part 1 deals with an introduction into ultrasound techniques, MLN anatomy and diagnostic reach of ultrasound techniques and part 2 with the clinical work up of neoplastic and inflammatory mediastinal...

An evaluation of a model for the systematic documentation of hospital based health promotion activities: results from a multicentre study

Directory of Open Access Journals (Sweden)

Morris Denise

2007-09-01

Full Text Available Abstract Background The first step of handling health promotion (HP in Diagnosis Related Groups (DRGs is a systematic documentation and registration of the activities in the medical records. So far the possibility and tradition for systematic registration of clinical HP activities in the medical records and in patient administrative systems have been sparse. Therefore, the activities are mostly invisible in the registers of hospital services as well as in budgets and balances. A simple model has been described to structure the registration of the HP procedures performed by the clinical staff. The model consists of two parts; first part includes motivational counselling (7 codes and the second part comprehends intervention, rehabilitation and after treatment (8 codes. The objective was to evaluate in an international study the usefulness, applicability and sufficiency of a simple model for the systematic registration of clinical HP procedures in day life. Methods The multi centre project was carried out in 19 departments/hospitals in 6 countries in a clinical setup. The study consisted of three parts in accordance with the objectives. A: Individual test. 20 consecutive medical records from each participating department/hospital were coded by the (coding specialists at local department/hospital, exclusively (n = 5,529 of 5,700 possible tests in total. B: Common test. 14 standardized medical records were coded by all the specialists from 17 departments/hospitals, who returned 3,046 of 3,570 tests. C: Specialist evaluation. The specialists from the 19 departments/hospitals evaluated if the codes were useful, applicable and sufficient for the registration in their own department/hospital (239 of 285. Results A: In 97 to100% of the local patient pathways the specialists were able to evaluate if there was documentation of HP activities in the medical record to be coded. B: Inter rater reliability on the use of the codes were 93% (57 to 100% and 71% (31

Evaluation of the quality, thermal maturity and distribution of potential source rocks in the Danish part of the Norwegian–Danish Basin

Directory of Open Access Journals (Sweden)

Kristensen, Lars

2008-11-01

Full Text Available The quality, thermal maturity and distribution of potential source rocks within the Palaeozoic–Mesozoic succession of the Danish part of the Norwegian–Danish Basin have been evaluated on the basis of screening data from over 4000 samples from the pre-Upper Cretaceous succession in 33 wells. The Lower Palaeozoic in the basin is overmature and the Upper Cretaceous – Cenozoic strata have no petroleum generation potential, but the Toarcian marine shales of the Lower Jurassic Fjerritslev Formation (F-III, F-IV members and the uppermost Jurassic – lowermost Cretaceous shales of the Frederikshavn Formation may qualify as potential source rocks in parts of the basin. Neither of these potential source rocks has a basinwide distribution; the present occurrence of the Lower Jurassic shales was primarily determined by regional early Middle Jurassic uplift and erosion. The generation potential of these source rocks is highly variable. The F-III and F-IV members show significant lateral changes in generation capacity, the best-developed source rocks occurring in the basin centre. The combined F-III andF-IV members in the Haldager-1, Kvols-1 and Rønde-1 wells contain ‘net source-rock’ thicknesses (cumulative thickness of intervals with Hydrogen Index (HI >200 mg HC/g TOC of 40 m, 83 m, and 92 m, respectively, displaying average HI values of 294, 369 and 404 mg HC/g TOC. The Mors-1 well contains 123 m of ‘net source rock’ with an average HI of 221 mg HC/g TOC. Parts of the Frederikshavn Formation possess a petroleum generation potential in the Hyllebjerg-1, Skagen-2, Voldum-1 and Terne-1 wells, the latter well containing a c.160 m thick highly oil-prone interval with an average HI of 478 mg HC/g TOC and maximum HI values >500 mg HC/g TOC. The source-rock evaluation suggests that a Mesozoic petroleum system is the most likely in the study area. Two primary plays are possible: (1 the Upper Triassic – lowermost Jurassic Gassum play, and (2the

Developing preceptorship through action research: Part 1.

Science.gov (United States)

Hilli, Yvonne; Melender, Hanna-Leena

2015-09-01

Clinical preception in practice plays a significant role in both registered and practical nurse studies. As such, the cooperation between the faculty and working life is important to narrow the theory-practice gap, with emphasis being placed on a student-oriented approach promoting self-direction and lifelong learning. The aim of this project was to develop the preceptorship at five different units within the health-care sector in western Finland by implementing an action research (AR) approach. This article is the first of a two-part article on the project, focusing on a cultural analysis and the development of preception models conducted within the project. The five units participating in the study were the following: a long-term care ward in the community, a ward for people with dementia, a geriatric ward, a medical ward and a surgical ward representing specialised care. The starting point of the study was a cultural analysis, which was made in all the five units to obtain a 'bottom-up' perspective. In each of the five units 3-5 nurses were appointed to become members of the core groups. This meant that all the units would start from the perspective of their own working environment when creating a preception model that would fit into their particular workplace. During this process, the participants received continuous support from the researchers. Several workshops and seminars were also arranged to further support the core groups and staff. The models were implemented and tested during the academic year 2010-2011 followed by an evaluation of the project. The evaluation results will be presented in the second part of the two-part article. The project showed that reflective practice and critical thinking can be improved through an AR approach. © 2015 Nordic College of Caring Science.

Core sampling system spare parts assessment

International Nuclear Information System (INIS)

Walter, E.J.

1995-01-01

Soon, there will be 4 independent core sampling systems obtaining samples from the underground tanks. It is desirable that these systems be available for sampling during the next 2 years. This assessment was prepared to evaluate the adequacy of the spare parts identified for the core sampling system and to provide recommendations that may remediate overages or inadequacies of spare parts

Increasingly Equalized? A Study of Part-Time Work in ‘Old’ and ‘New’ Part-Time Work Regimes

OpenAIRE

Heidi Nicolaisen

2011-01-01

Recent debates on equalization of part-time work alongside full-time work stress the importance of high quality part-time jobs. This paper compares equalization in banking in three countries: two `old´ part-time work regimes, Norway and Sweden, and Ireland, where part-time work started to increase more recently. Banking is particularly interesting as a sector with a high proportion of female employment and good working conditions. One main interest is the role of regulations and how they are ...

Fluvial sediments characterization of Hornád river in its chosen parts (preliminary study

Directory of Open Access Journals (Sweden)

Stela Hanigovská

2008-12-01

Full Text Available Knowledge of main river sedimentary characteristics is very important source of information for next study or potentialcommercial usage of fluvial sediments. In paper is shown characterization of sediment distribution in chosen part of the river Hornád.Three main facial types were studied and described – gravel, sand and clay. Model created in this study shows that Hornád is a riverwith predominant gravel transport. This model also shows a sufficient amount of gravel for commercial use in some parts of the river.

Hygrothermal Simulation of Foundations: Part 1 - Soil Material Properties

Energy Technology Data Exchange (ETDEWEB)

Kehrer, Manfred [ORNL; Pallin, Simon B [ORNL

2012-10-01

The hygrothermal performance of soils coupled to buildings is a complicated process. A computational approach for heat transfer through the ground has been well defined (EN ISO 13370:2007, 2007), and simplified methods have been developed (Staszczuk, Radon, and Holm 2010). However, these approaches generally ignore the transfer of soil moisture, which is not negligible (Janssen, Carmeliet, and Hens 2004). This study is divided into several parts. The intention of the first part is to gather, comprehend and adapt soil properties from Soil Science. The obtained information must be applicable to related tasks in Building Science and validated with hygrothermal calculation tools. Future parts of this study will focus on the validation aspect of the soil properties to be implemented. Basic changes in the software code may be requested at this time. Different types of basement construction will be created with a hygrothermal calculation tool, WUFI. Simulations from WUFI will be compared with existing or ongoing measurements. The intentions of the first part of this study have been fulfilled. The soil properties of interest in Building Science have been defined for 12 different soil textures. These properties will serve as input parameters when performing hygrothermal calculations of building constructions coupled to soil materials. The reliability of the soil parameters will be further evaluated with measurements in Part 2.

Increasingly Equalized? A Study of Part-Time Work in ‘Old’ and ‘New’ Part-Time Work Regimes

Directory of Open Access Journals (Sweden)

Heidi Nicolaisen

2011-01-01

Full Text Available Recent debates on equalization of part-time work alongside full-time work stress the importance of high quality part-time jobs. This paper compares equalization in banking in three countries: two `old´ part-time work regimes, Norway and Sweden, and Ireland, where part-time work started to increase more recently. Banking is particularly interesting as a sector with a high proportion of female employment and good working conditions. One main interest is the role of regulations and how they are enforced at company level. The analysis shows that part-time work in the Nordic countries is normalized in terms of access and general work conditions, while in Ireland access is more restricted. Career opportunities are, however, restricted in all three countries. This paper argues that further equalization may be hindered by `soft´ regulations and a gradual normalization process that also normalizes disadvantages associated with part-time work and the category of the `working mother´.

A Study of the Evaluation Dimensions and Criteria for OpenCourseWare Websites

Directory of Open Access Journals (Sweden)

Yi-Ju Wang

2015-04-01

Full Text Available OpenCourseWare (OCW, a set of free-of-use learning materials established by universities, became quite a success over the years and aroused the users’ willingness to learn online. However, the design of OCW websites, including the structure, organization of learning resources and interfaces is multi-variant and disordered. The system and arrangement are still lacking of an evaluation standard. The goal of this study is to establish and verify the dimensions and the criteria that are suitable for evaluation of OCW websites. To achieve the research goal, the researchers performed document analysis and the Delphi Method. Sixteen experts in a total took part in the Delphi panel. By giving three rounds of questionnaire to those experts in the self-developed e-Delphi system, the researcher gathered their opinions then analyzed them back and forth. The final edition of the Evaluation Dimensions and Criteria for OpenCourseWare Website includes seven dimensions with fifty-seven criteria. Finally, concrete suggestions for OCW website establishment and administration were provided. Implications and recommendations for future research were also addressed.

How are we doing? Evaluation as part of sexuality education.

Science.gov (United States)

Brick, P

1997-01-01

In 1986, Planned Parenthood of Greater Northern New Jersey (PPGNNJ) began to evaluate its sex education programs. First PPGNNJ staff evaluated a 1-day, 40-minute lesson designed to help high school students 1) identify risk behavior for unplanned pregnancy, 2) estimate risk, and 3) review basic contraceptive methods. This project showed that a single lesson could substantially increase knowledge about contraception and comfort with the idea of condoms and family planning (FP) clinic use. A second PPGNNJ evaluation project revealed that adding a motivational video to the lesson increased the feeling of comfort expressed about use of an FP clinic and that PPGNNJ staff were more effective than regular teachers in promoting change in attitudes about FP services, but teachers were more effective in promoting longterm knowledge of risk. Evaluation of five popular AIDS prevention videos revealed that all of the videos significantly increased HIV/AIDS knowledge and motivation to seek protection. However, the videos made many viewers feel helpless about their ability to protect themselves and unwilling to support an AIDS home in their neighborhood. PPGNNJ's staff also designed the "Human Sexuality Questionnaire" to determine the impact of a five-session sex education program delivered to high-risk youth. This tool is now used in program evaluation nationwide. Evaluation of two date rape prevention strategies (a single-lesson, interactive date-rape scenario and a video) revealed a significant impact on females and none on males. Testing of a 1994 video and discussion session designed to improve adolescent attitudes towards use of an FP clinic also had positive results. While these evaluation methodologies were not problem-free, evaluation forced PPGNNJ staff to define objectives and lessons, enter a new collaboration with schools, and use results to continually evaluate work.

The Breast Health Intervention Evaluation Study

National Research Council Canada - National Science Library

Blumenthal, Daniel

1997-01-01

The Breast Health Intervention Evaluation (BRIE) Study will evaluate the relative effectiveness of three different approaches to breast health messages--a fear appeal, a positive affect appeal, and an affectively neutral, cognitive appeal...

Married Thai Working Mothers: Coping with Initial Part-Time Doctoral Study

Science.gov (United States)

Thinnam, Thanit

2011-01-01

Advanced educational attainment can "grow" a career. But acquiring a doctoral qualification adds study to existing work and family responsibilities, especially for women. This phenomenological research explores the experiences of eight Thai working mothers enrolled in the initial stage of part-time doctoral programs in Thailand. A…

Ethics Education in University Aviation Management Programs in the US. Part 1; The Need

Science.gov (United States)

Oderman, Dale B.

2002-01-01

This three-part study examines how four-year universities in the United States with baccalaureate programs in aviation management include ethics instruction in their curricula. Based on a literature review, no research exists to describe the current status of teaching ethics to aviation students. Yet concurrently, unethical activities reported in the media involving the aviation industry indicates the need for such programs. Part One of this study justifies the need for ethics education and develops a series of hypotheses to evaluate the current status of ethics instruction, which was investigated and will be reported on in Parts Two and Three of this study, respectively.

Evaluation of epidemiological studies

International Nuclear Information System (INIS)

Breckow, J.

1995-01-01

The publication is intended for readers with a professional background in radiation protection who are not experts in the field of epidemiology. The potentials and the limits of epidemiology are shown and concepts and terminology of radioepidemilogic studies as well as epidemiology in general are explained, in order to provide the necessary basis for understanding or performing evaluations of epidemiologic studies. (orig./VHE) [de

A study of the inner parts of protoplanetary disks observed by interferometry

International Nuclear Information System (INIS)

Anthonioz, Fabien

2015-01-01

Observing gas and dusty disks around young stars are of utmost importance for our knowledge about planetary formation. Observations of these disks bring unprecedented details about their structure and composition, and provide stronger and stronger constrains on planetary formation models. However, the inner parts of these disk are still barely known. Indeed, a 100 m diameter telescope would be required in order to resolve these inner region, for the closest young stars; nowadays, the construction of such telescope is impossible technologically and financially. By combining the light of pairs of telescopes, the interferometry technique is able to reach the sufficient resolving power, and permits us to observe the inner parts of circumstellar disks. My thesis has been focused on the observation and study of the inner part of TTauri's circumstellar disks. I present in this manuscript a statistical study on the environment around these stars, along with its modeling by taking into account thermal emission and light scattering of the disk. Finally, I present a more complete modelling for some of these stars, done by constraining spectroscopic, interferometric and photometric datasets with a radiative transfer code. (author)

Nordic study on reactor waste. Technical part 1 and 2

International Nuclear Information System (INIS)

1981-08-01

An important part of the Nordic studies on system- and safety analysis of the management of low and medium level radioactive waste from nuclear power plants, is the safety analysis of a Reference System. This reference system was established within the study and is described in this Technical Part 1. The reference system covers waste management Schemes that are potential possibilities in either one of the four participating Nordic countries. The reference system is based on: a power reactor system consisting of 6 BWR's of 500 MWe each, operated simultaneously over the same 30 year period, and deep bed granular ion exchange resin wastes from the Reactor Water Clean-Up System (RWCS and powdered ion exchange resin from the Spent Fuel Pool Cleanup System (SFPCS)). Both waste types are supposed to be solidified by mixing with cement and bitumen. Two basic types of containers are considered. Standard 200 liter steel drums and specially made cubicreinforced concrete moulds with a net volume of 1 m 3 . The Nordic study assumes temporary storage of the solidified waste for a maximum of 50 years before the waste is transferred to the disposal site. Transportation of the waste from the storage facilitiy to the disposal site will be by road or sea. Three different disposal facilities are considered: Shallow land burial, near surface concrete bunker, and rock cavern with about 30 m granite cover. (EG)

The WACMOS-ET project – Part 2: Evaluation of global terrestrial evaporation data sets

KAUST Repository

Miralles, D. G.; Jimé nez, C.; Jung, M.; Michel, D.; Ershadi, Ali; McCabe, Matthew; Hirschi, M.; Martens, B.; Dolman, A. J.; Fisher, J. B.; Mu, Q.; Seneviratne, S. I.; Wood, E. F.; Ferná ndez-Prieto, D.

2016-01-01

The WAter Cycle Multi-mission Observation Strategy – EvapoTranspiration (WACMOS-ET) project aims to advance the development of land evaporation estimates on global and regional scales. Its main objective is the derivation, validation, and intercomparison of a group of existing evaporation retrieval algorithms driven by a common forcing data set. Three commonly used process-based evaporation methodologies are evaluated: the Penman–Monteith algorithm behind the official Moderate Resolution Imaging Spectroradiometer (MODIS) evaporation product (PM-MOD), the Global Land Evaporation Amsterdam Model (GLEAM), and the Priestley–Taylor Jet Propulsion Laboratory model (PT-JPL). The resulting global spatiotemporal variability of evaporation, the closure of regional water budgets, and the discrete estimation of land evaporation components or sources (i.e. transpiration, interception loss, and direct soil evaporation) are investigated using river discharge data, independent global evaporation data sets and results from previous studies. In a companion article (Part 1), Michel et al. (2016) inspect the performance of these three models at local scales using measurements from eddy-covariance towers and include in the assessment the Surface Energy Balance System (SEBS) model. In agreement with Part 1, our results indicate that the Priestley and Taylor products (PT-JPL and GLEAM) perform best overall for most ecosystems and climate regimes. While all three evaporation products adequately represent the expected average geographical patterns and seasonality, there is a tendency in PM-MOD to underestimate the flux in the tropics and subtropics. Overall, results from GLEAM and PT-JPL appear more realistic when compared to surface water balances from 837 globally distributed catchments and to separate evaporation estimates from ERA-Interim and the model tree ensemble (MTE). Nonetheless, all products show large dissimilarities during conditions of water stress and

The WACMOS-ET project – Part 2: Evaluation of global terrestrial evaporation data sets

KAUST Repository

Miralles, D. G.

2016-02-23

The WAter Cycle Multi-mission Observation Strategy – EvapoTranspiration (WACMOS-ET) project aims to advance the development of land evaporation estimates on global and regional scales. Its main objective is the derivation, validation, and intercomparison of a group of existing evaporation retrieval algorithms driven by a common forcing data set. Three commonly used process-based evaporation methodologies are evaluated: the Penman–Monteith algorithm behind the official Moderate Resolution Imaging Spectroradiometer (MODIS) evaporation product (PM-MOD), the Global Land Evaporation Amsterdam Model (GLEAM), and the Priestley–Taylor Jet Propulsion Laboratory model (PT-JPL). The resulting global spatiotemporal variability of evaporation, the closure of regional water budgets, and the discrete estimation of land evaporation components or sources (i.e. transpiration, interception loss, and direct soil evaporation) are investigated using river discharge data, independent global evaporation data sets and results from previous studies. In a companion article (Part 1), Michel et al. (2016) inspect the performance of these three models at local scales using measurements from eddy-covariance towers and include in the assessment the Surface Energy Balance System (SEBS) model. In agreement with Part 1, our results indicate that the Priestley and Taylor products (PT-JPL and GLEAM) perform best overall for most ecosystems and climate regimes. While all three evaporation products adequately represent the expected average geographical patterns and seasonality, there is a tendency in PM-MOD to underestimate the flux in the tropics and subtropics. Overall, results from GLEAM and PT-JPL appear more realistic when compared to surface water balances from 837 globally distributed catchments and to separate evaporation estimates from ERA-Interim and the model tree ensemble (MTE). Nonetheless, all products show large dissimilarities during conditions of water stress and

HIV/AIDS Policy-Making in Iran: Part 2- from Formulation to Evaluation

Directory of Open Access Journals (Sweden)

Rahim Khodayari Zarnaq

2018-01-01

Full Text Available Background and Objectives: Achieving an appropriate policy needs an in-depth and comprehensive understanding of policy-making process. This study aimed to analyze HIV/AIDS policy-making process in Iran. Material and Methods: This is a qualitative/exploratory study. Data were collected through document review and semi-structured interview. Non-probability sampling was used for selecting documents and research participants. We used framework analysis approach assisted by MAXQDA for analyzing qualitative data. Results: AIDS policy is formulated in two specific ways within national work group in the format of national strategic plan and drug damage reduction committee. The main problem of the policy process is fragmentation and lack of comprehensiveness. Country approach of the policy implementation is top-down. The main duty of country committee and its sub-committees facing with some challenges is generating interaction between the relevant organizations. Despite the specific structure of evaluation process, it suffers from challenges such as lack of required implementation power, lack of resource anticipation, weakness in systematic and comprehensiveness evaluation and not-enough cooperation among plan’s stakeholders. Conclusion: It is obvious that policy-making in this area is completely governmental and the role of non-governmental organizations and civil servants is neglected. It seems that reform in AIDS policy-making structure and process can solve most of the problems of implementation, monitoring and evaluation.

Pre-Medicare Eligible Individuals’ Decision-Making In Medicare Part D: An Interview Study

Directory of Open Access Journals (Sweden)

Tao Jin, B.S. Pharm, Ph.D. Candidate

2010-01-01

Full Text Available ObjectivesThe objective of this study was to elicit salient beliefs among pre-Medicare eligible individuals regarding (1 the outcomes associated with enrolling in the Medicare Part D program; (2 those referents who might influence participants’ decisions about enrolling in the Part D program; and (3 the perceived barriers and facilitators facing those considering enrolling in the Part D program.MethodsFocused interviews were used for collecting data. A sample of 10 persons between 62 and 64 years of age not otherwise enrolled in the Medicare program was recruited. Interviews were audio taped and field notes were taken concurrently. Audio recordings were reviewed to amend field notes until obtaining a thorough reflection of interviews. Field notes were analyzed to elicit a group of beliefs, which were coded into perceived outcomes, the relevant others who might influence Medicare Part D enrollment decisions and perceived facilitators and impediments. By extracting those most frequently mentioned beliefs, modal salient sets of behavioral beliefs, relevant referents, and control beliefs were identified.ResultsAnalyses showed that (1 most pre-Medicare eligible believed that Medicare Part D could “provide drug coverage”, “save money on medications”, and “provide financial and health security in later life”. However, “monthly premiums”, “the formulary with limited drug coverage” and “the complexity of Medicare Part D” were perceived as major disadvantages; (2 immediate family members are most likely to influence pre-Medicare eligible’s decisions about Medicare Part D enrollment; and (3 internet and mailing educational brochures are considered to be most useful resources for Medicare Part D enrollment. Major barriers to enrollment included the complexity and inadequacy of insurance plan information.ConclusionThere are multiple factors related to decision-making surrounding the Medicare Part D enrollment. These factors

Pre-Medicare Eligible Individuals' Decision-Making In Medicare Part D: An Interview Study

Directory of Open Access Journals (Sweden)

Tao Jin

2010-01-01

Full Text Available Objectives: The objective of this study was to elicit salient beliefs among pre-Medicare eligible individuals regarding (1 the outcomes associated with enrolling in the Medicare Part D program; (2 those referents who might influence participants' decisions about enrolling in the Part D program; and (3 the perceived barriers and facilitators facing those considering enrolling in the Part D program. Methods: Focused interviews were used for collecting data. A sample of 10 persons between 62 and 64 years of age not otherwise enrolled in the Medicare program was recruited. Interviews were audio taped and field notes were taken concurrently. Audio recordings were reviewed to amend field notes until obtaining a thorough reflection of interviews. Field notes were analyzed to elicit a group of beliefs, which were coded into perceived outcomes, the relevant others who might influence Medicare Part D enrollment decisions and perceived facilitators and impediments. By extracting those most frequently mentioned beliefs, modal salient sets of behavioral beliefs, relevant referents, and control beliefs were identified. Results: Analyses showed that (1 most pre-Medicare eligible believed that Medicare Part D could "provide drug coverage", "save money on medications", and "provide financial and health security in later life". However, "monthly premiums", "the formulary with limited drug coverage" and "the complexity of Medicare Part D" were perceived as major disadvantages; (2 immediate family members are most likely to influence pre-Medicare eligible's decisions about Medicare Part D enrollment; and (3 internet and mailing educational brochures are considered to be most useful resources for Medicare Part D enrollment. Major barriers to enrollment included the complexity and inadequacy of insurance plan information. Conclusion: There are multiple factors related to decision-making surrounding the Medicare Part D enrollment. These factors include the advantages

Revisiting the description of Protein-Protein interfaces. Part II: Experimental study

OpenAIRE

Cazals , Frédéric; Proust , Flavien

2006-01-01

This paper provides a detailed experimental study of an interface model developed in the companion article F. Cazals and F. Proust, Revisiting the description of Protein-Protein interfaces. Part I: algorithms. Our experimental study is concerned with the usual database of protein-protein complexes, split into five families (Proteases, Immune system, Enzyme Complexes, Signal transduction, Misc.) Our findings, which bear some contradictions with usual statements are the following: (i)Connectivi...

Radiological evaluation of tumor response in oncological studies (tumor response evaluation)

International Nuclear Information System (INIS)

Gebauer, B.; Riess, H.

2011-01-01

Purpose: Radiological-morphological response evaluation plays a major role in oncological therapy and studies for approval. Specific criteria have been developed for some tumor entities and chemotherapeutics. Application, limitations and definitions of the most frequently used criteria for tumor response evaluation will be presented. Materials and Methods: Review based on a selective literature research. Results: In clinical oncological therapy studies, WHO and RECIST are the most frequently used criteria to evaluate morphological therapy response. RECIST criteria have been modified recently, especially with respect to the evaluation of lymph nodes, and were published as RECIST 1.1 in 2009. All criteria were originally developed and defined to review clinical multicenter trials for approval. Using these criteria in a clinical situation, certain limitations have to be considered. To evaluate response, a baseline scan before therapy start is mandatory. Special tumor response criteria have been defined for some certain tumor entities. Oncologists and radiologists should define in advance which criteria are used before starting therapy. Conclusion: The use of defined criteria is very important in oncology response evaluation. In-depth knowledge of the criteria and their limits is required for correct usage. (orig.)

Approaches and Obstacles to the Evaluation of Investment in Continuing Vocational Training: Discussion and Case Studies from Six Member States of the European Union. CEDEFOP Panorama. Discussion Paper/Case Studies.

Science.gov (United States)

Grunewald, Uwe; Moraal, Dick; Sorensen, John Houman; Luttringer, Jean-Marie; Pasco, Nicolas; Kohler, Alexander; Barrett, Alan; O'Connell, Philip; Garibaldo, Francesco; Lorenzoni, Stefan; Mandl, Dieter

This report summarizes six case studies on different aspects of the issue of evaluating investing in continuing vocational training (CVT). Part 1 (chapters 1-2) contains "Conceptual Introduction" (Jean-Marie Luttringer), which explores practical problems in considering training expenses as an investment, and "Methodological…

EVALUATION OF TROPHIC STATUS OF AGRAKHAN BAY (THE NORTH CASPIAN SEA AS A PART OF ECOLOGICAL MONITORING OF SPECIALLY PROTECTED AREAS

Directory of Open Access Journals (Sweden)

A. A. Gadzhiev

2013-01-01

Full Text Available Abstract. Aim. Hydrochemical composition of waters of Agrakhan Bay (the North Caspian Sea, degree of pollution, structure and quantitative characteristics of phytoplankton, zooplankton and zoobenthos is given in the paper. Evaluation of a trophic status of the bay and seasonal trophodynamics are given as a result of study.Material and methods. The study is based on original materials from expeditions of 2012 (Autumn and 2013 (Spring and Summer in Agrakhan Bay. The complex materials are collected on stations with distance 3.5 km. Totally was made 16 marine stations, where samples of water, phytoplankton, zooplankton and benthos were taken.Results. Agrakhan Bay is eutrophic by level of dissolved oxygen and its BOD. However, the oxygen deficiency is not observed. concentration of oxygen is high almost in all seasons, that has a beneficial effect on hydrobionts. Seasonal dynamics indicates that Agrakhansky bay is oligotrophic within a year, but its trophic status increases to mesotrophic and even to hypertrophic in some periods. The northern part ща the bay is eutrophic. Difference in trophic levels of different parts of the bay is the result of significant differences in depth and area of water surface.Conclusions. Anthropogenic impact on Agrakhan Bay increases its trophic status. Seasonal trophic level of Agrakhan Gulf except natural processes depends on the "purity" of the Terek River sediments, which are the main source of biogenic elements. Typically, the absolute concentration of biogenic elements in Agrakhan Bay increases with the increase of eutrophication.

Attitudes of medical students towards taking part-time jobs: a study ...

African Journals Online (AJOL)

Attitudes of medical students towards taking part-time jobs: a study amongst first year clinical students of the College of Medicine, University of Ibadan. ... All participants were interviewed using a self-administered questionnaire to obtain information on bio-data, ... Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Briquetting of coal fines and sawdust. Part 1: binder and briquetting-parameters evaluations

Energy Technology Data Exchange (ETDEWEB)

D. Taulbee; D.P. Patil; Rick Q. Honaker; B.K. Parekh [University of Kentucky, Lexington, KY (United States). Center for Applied Energy Research

2009-01-15

Various technical and economic aspects relating to the briquetting of fine coal with sawdust have been evaluated with the results for two segments of that study presented here: binder and briquetting-parameter evaluations. Approximately 50 potential binder formulations were subjected to a series of screening evaluations to identify three formulations that were the most cost effective for briquetting fine coal with sawdust. Two of the binders, guar gum and wheat starch, were selected as most suitable for the pulverized coal market while the third formulation, lignosulfonate/lime, was targeted for the stoker market. Following binder selection, a number of briquetting parameters including binder and sawdust concentration, sawdust type, briquetting pressure and dwell time, coal and sawdust particle size, clay content, moisture content, and cure temperature and cure time were evaluated. Briquetting pressure and dwell time have the least impact while binder and sawdust concentrations, sawdust type, and curing conditions exerted the greatest influence on briquette quality. 7 refs.

Operation window and part-load performance study of a syngas fired gas turbine

International Nuclear Information System (INIS)

He, Fen; Li, Zheng; Liu, Pei; Ma, Linwei; Pistikopoulos, Efstratios N.

2012-01-01

Integrated coal gasification combined cycle (IGCC) provides a great opportunity for clean utilization of coal while maintaining the advantage of high energy efficiency brought by gas turbines. A challenging problem arising from the integration of an existing gas turbine to an IGCC system is the performance change of the gas turbine due to the shift of fuel from natural gas to synthesis gas, or syngas, mainly consisting of carbon monoxide and hydrogen. Besides the change of base-load performance, which has been extensively studied, the change of part-load performance is also of great significance for the operation of a gas turbine and an IGCC plant. In this paper, a detailed mathematical model of a syngas fired gas turbine is developed to study its part-load performance. A baseline is firstly established using the part-load performance of a natural gas fired gas turbine, then the part-load performance of the gas turbine running with different compositions of syngas is investigated and compared with the baseline. Particularly, the impacts of the variable inlet guide vane, the degree of fuel dilution, and the degree of air bleed are investigated. Results indicate that insufficient cooling of turbine blades and a reduced compressor surge margin are the major factors that constrain the part-load performance of a syngas fired gas turbine. Results also show that air bleed from the compressor can greatly improve the working condition of a syngas fired gas turbine, especially for those fired with low lower heating value syngas. The regulating strategy of a syngas fired gas turbine should also be adjusted in accordance to the changes of part-load performance, and a reduced scope of constant TAT (turbine exhaust temperature) control mode is required.

Design of a study evaluating the effects, health economics, and stakeholder perspectives of a multi-component occupational rehabilitation program with an added workplace intervention - a  study protocol.

Science.gov (United States)

Rise, Marit B; Skagseth, Martin; Klevanger, Nina E; Aasdahl, Lene; Borchgrevink, Petter; Jensen, Chris; Tenggren, Hanne; Halsteinli, Vidar; Jacobsen, Trym N; Løland, Svein B; Johnsen, Roar; Fimland, Marius S

2018-02-05

Recent research has suggested that interventions at the workplace might be the most potent ingredient in return to work interventions, but few studies have investigated the different effects of workplace interventions as part of occupational rehabilitation programs. The comprehensive design described in this article includes effect (on return to work and health outcomes), and health economic evaluations of a workplace intervention added to a multicomponent rehabilitation program. Qualitative and mixed method studies will investigate sick-listed persons', rehabilitation therapists' and employers' perspectives on the usability and outcomes of the rehabilitation program and the workplace intervention. The program and intervention are provided to patients with musculoskeletal, psychological or general and unspecified diagnoses. The program is multi-component and includes Acceptance and Commitment Therapy, physical exercise, patient education and creating a plan for increased work participation. Persons who are employed, aged from 18 to 60 years, with a current sick leave status of 50% or more and a diagnosis within the musculoskeletal, psychological or general and unspecified chapters of International Classification of Primary Care-2 (ICPC-2) will be recruited to a researcher-blinded parallel-group randomized controlled trial. All participants take part in an in-patient occupational rehabilitation program, while the intervention group also takes part in an intervention at the workplace. The effect and economic evaluation will investigate the effect of the added workplace intervention. The primary outcome measures will be time until full sustainable return to work and total number of sickness absence days in the 12 months after inclusion. Health economic evaluations will investigate the cost-effectiveness and cost-utility. Qualitative studies will investigate rehabilitation therapists' experiences with working towards return to work within an ACT-approach and

Strategies for Evaluating a Freshman Studies Program.

Science.gov (United States)

Ketkar, Kusum; Bennett, Shelby D.

1989-01-01

The study developed an economic model for the evaluation of Seaton Hall University's freshman studies program. Two techniques used to evaluate the economic success of the program are break-even analysis and elasticity coefficient. (Author/MLW)

Predicting the Mineral Composition of Dust Aerosols. Part 2; Model Evaluation and Identification of Key Processes with Observations

Science.gov (United States)

Perlwitz, J. P.; Garcia-Pando, C. Perez; Miller, R. L.

2015-01-01

A global compilation of nearly sixty measurement studies is used to evaluate two methods of simulating the mineral composition of dust aerosols in an Earth system model. Both methods are based upon a Mean Mineralogical Table (MMT) that relates the soil mineral fractions to a global atlas of arid soil type. The Soil Mineral Fraction (SMF) method assumes that the aerosol mineral fractions match the fractions of the soil. The MMT is based upon soil measurements after wet sieving, a process that destroys aggregates of soil particles that would have been emitted from the original, undisturbed soil. The second method approximately reconstructs the emitted aggregates. This model is referred to as the Aerosol Mineral Fraction (AMF) method because the mineral fractions of the aerosols differ from those of the wet-sieved parent soil, partly due to reaggregation. The AMF method remedies some of the deficiencies of the SMF method in comparison to observations. Only the AMF method exhibits phyllosilicate mass at silt sizes, where they are abundant according to observations. In addition, the AMF quartz fraction of silt particles is in better agreement with measured values, in contrast to the overestimated SMF fraction. Measurements at distinct clay and silt particle sizes are shown to be more useful for evaluation of the models, in contrast to the sum over all particles sizes that is susceptible to compensating errors, as illustrated by the SMF experiment. Model errors suggest that allocation of the emitted silt fraction of each mineral into the corresponding transported size categories is an important remaining source of uncertainty. Evaluation of both models and the MMT is hindered by the limited number of size-resolved measurements of mineral content that sparsely sample aerosols from the major dust sources. The importance of climate processes dependent upon aerosol mineral composition shows the need for global and routine mineral measurements.

QUALITY OF AN ACADEMIC STUDY PROGRAMME - EVALUATION MODEL

Directory of Open Access Journals (Sweden)

Mirna Macur

2016-01-01

Full Text Available Quality of an academic study programme is evaluated by many: employees (internal evaluation and by external evaluators: experts, agencies and organisations. Internal and external evaluation of an academic programme follow written structure that resembles on one of the quality models. We believe the quality models (mostly derived from EFQM excellence model don’t fit very well into non-profit activities, policies and programmes, because they are much more complex than environment, from which quality models derive from (for example assembly line. Quality of an academic study programme is very complex and understood differently by various stakeholders, so we present dimensional evaluation in the article. Dimensional evaluation, as opposed to component and holistic evaluation, is a form of analytical evaluation in which the quality of value of the evaluand is determined by looking at its performance on multiple dimensions of merit or evaluation criteria. First stakeholders of a study programme and their views, expectations and interests are presented, followed by evaluation criteria. They are both joined into the evaluation model revealing which evaluation criteria can and should be evaluated by which stakeholder. Main research questions are posed and research method for each dimension listed.

Dynamic loading of galvanized parts

Directory of Open Access Journals (Sweden)

Michal Černý

2010-01-01

Full Text Available This work is divided into two parts: the theoretical part includes actual knowledge and points of view about degradation processes in construction materials, anticorrosion protection, zinc coat composition and high frequency fatigue. The laboratory part follow-up existing regulations contents Czech standards and formulate specifications for acquisition of objective information from acceleration la­bo­ra­to­ry tests in condensation chests, mechanical high frequency fatigue tests on pulsator machine and possibilities of evaluation of fatigue tests. Laboratory findings declare to fundamental types of damage of constructions with anticorrosion protection in real loading conditions with dynamic high frequency character. Laboratory tests were made in sulphide and chloride environments.

Study of seismic events in the Central Part of East European Platform

Science.gov (United States)

Gorbunova, Ella; Sanina, Irina; Ivanchenko, Galina; Nesterkina, Margarita; Konstantinovskaya, Natalya

2015-04-01

A measurement system for location seismic events in the Central Part of East European Platform is situated within the Mikhnevo Geophysical Observatory of the RAS Institute of Geospheres Dynamics and consists of 12 seismic stations. One vertical station is located in the center of the group in a shaft tunnel. The other stations are located on the periphery in three concentric circles and are almost equally spaced with regard to the terrain to ensure full azimuth coverage to the maximum extent possible. The unique array identifies events with a magnitude up to 3 at the distances until 1000 km within the Central Part of East European platform. Most of the events recorded by the Mikhnevo array at a distance of 60-500 km are man-made events represented by explosions in quarries during the development of mineral deposits. Long-term seismic records of explosions in quarries have been processed for the period from 2004 to 2014 to generate a database containing standard waveforms for each quarry. Some events of unknown origin appear in the records for this period; these do not correspond to the identified seismic forms for explosions in known quarries. Epicenter coordinates for these events do not match the coordinates of the known quarries. A cosmotectonic map of the Central Part of East European Platform was compiled during the studies using the LESSA software package (Lineament Extraction and Stripe Statistical Analysis) and data on the deep crustal structure, which made it possible to define the morphostructural plan and evaluate the geodynamic conditions in the area. The deep basement structure through the sedimentary cover is expressed in the surface texture of the area under study. The region's neotectonics is closely related to the history of deep structures, in particular, aulacogens extending in different directions, which may show in the contemporary morphostructural plan, mainly as inversion and partially inherited forms. Out of events of unknown nature

Application of fuzzy analytic network process for barrier evaluation in automotive parts remanufacturing towards cleaner production

DEFF Research Database (Denmark)

Govindan, Kannan; Shankar, Madan; Kannan, Devika

2016-01-01

to hidden facts. Many researchers have explored such hidden facts in auto parts remanufacturing in developing nations and their emerging economies. However, there is a huge gap in the state-of-the-art remanufacturing practices in India, despite India's strong advancements in the automobile industry. In fact......, India's automobile industry is rapidly approaching that of China's in recent years. Although some studies are available regarding remanufacturing implementation, current research has generally failed to offer a deep analysis of the factors and barriers that exist as hurdles to such implementation....... Consequently, this paper attempts to investigate the essential barrier to auto parts remanufacturing in an Indian scenario, and we also address vital interrelationships and interdependencies. To achieve the aim of the study, a model framework is proposed and applied to an Indian case industry. The data...

Additive Manufacturing of Parts and Tooling in Robotic Systems

Energy Technology Data Exchange (ETDEWEB)

Love, Lonnie J. [ORNL; Hassen, Ahmed A. [ORNL; Chesser, Phillip C. [ORNL; Parsons, Jeremy [Mantaro Networks, Inc.

2018-04-01

ORNL worked with Transcend Robotics, LLC to explore additive manufacturing of the two-piece compression body for their ARTI mobile robot platform. Extrusion compression molding was identified as an effective means of manufacturing these parts. ORNL consulted on modifications to the housing design to accommodate the selected manufacturing process. Parts were printed using ORNL's FDM machines for testing and evaluation of the design as a precursor to molding the parts. The assembly and evaluation of the parts proved favorable and minor design changes to improve assembly and performance were identified.The goal is to develop a light weight and rugged two-part robotic enclosure for an unmanned ground vehicle UGV) that will be used in search and rescue applications. The FDM parts fabricated by ORNL allowed Transcend Robotics to assemble a prototype robot and verify that the new parts will meet the performance requirements. ORNL fabricated enclosure parts out of ABS and Nylon 12 materials such that the design could be tested prior to fabricating tooling for compression molding of Nylon 6 with carbon fiber fill. The robot was performance tested and compared with the previous manufacturing techniques and found to have superior performance.

Evaluation of physicians' professional performance: An iterative development and validation study of multisource feedback instruments

Directory of Open Access Journals (Sweden)

Overeem Karlijn

2012-03-01

Full Text Available Abstract Background There is a global need to assess physicians' professional performance in actual clinical practice. Valid and reliable instruments are necessary to support these efforts. This study focuses on the reliability and validity, the influences of some sociodemographic biasing factors, associations between self and other evaluations, and the number of evaluations needed for reliable assessment of a physician based on the three instruments used for the multisource assessment of physicians' professional performance in the Netherlands. Methods This observational validation study of three instruments underlying multisource feedback (MSF was set in 26 non-academic hospitals in the Netherlands. In total, 146 hospital-based physicians took part in the study. Each physician's professional performance was assessed by peers (physician colleagues, co-workers (including nurses, secretary assistants and other healthcare professionals and patients. Physicians also completed a self-evaluation. Ratings of 864 peers, 894 co-workers and 1960 patients on MSF were available. We used principal components analysis and methods of classical test theory to evaluate the factor structure, reliability and validity of instruments. We used Pearson's correlation coefficient and linear mixed models to address other objectives. Results The peer, co-worker and patient instruments respectively had six factors, three factors and one factor with high internal consistencies (Cronbach's alpha 0.95 - 0.96. It appeared that only 2 percent of variance in the mean ratings could be attributed to biasing factors. Self-ratings were not correlated with peer, co-worker or patient ratings. However, ratings of peers, co-workers and patients were correlated. Five peer evaluations, five co-worker evaluations and 11 patient evaluations are required to achieve reliable results (reliability coefficient ≥ 0.70. Conclusions The study demonstrated that the three MSF instruments produced

The Motivations and Outcomes of Studying for Part-Time Mature Students in Higher Education

Science.gov (United States)

Swain, Jon; Hammond, Cathie

2011-01-01

This paper examines the motivations and outcomes for mature students who study part-time in higher education (HE) in the UK. Although many students in HE are mature part-time learners, they have not been the specific focus of much research or policy interest. In-depth narrative interviews were carried out with 18 graduates who had studied…

Traces: making sense of urodynamics testing--Part 8: Evaluating sensations of bladder filling.

Science.gov (United States)

Gray, Mikel

2011-01-01

The "Traces" series discusses how the urodynamic clinician generates usable data from a filling cystometrogram (CMG). Part 8 focuses on the question, "What are the sensations of bladder filling?" Recent research suggests that sensations of bladder filling wax and wane from consciousness in healthy persons free of bothersome lower urinary tract symptoms. Because of its invasive and atypical nature when compared to daily life, multichannel urodynamics testing cannot reproduce the numerous and complex variables that influence bladder sensation in the healthy individual, making the evaluation of sensations of bladder filling a particularly challenging component of the filling CMG. Routine assessment of bladder sensations focuses on identification of three landmarks--first sensation of bladder filling, first desire to void, and a strong desire to void. A fourth sensation, bladder fullness or a compelling desire to void, is recommended. In addition to assessing these sensations, the urodynamic clinician must assess sensations indicating associated disease or disorders affecting lower urinary tract function, including urgency, pain, and atypical sensations. This assessment should be completed in the context of the results of one or more validated instruments used to measure bladder sensations.

Fatigue Analysis of Rotating Parts. A Case Study for a Belt Driven Pulley

Science.gov (United States)

Sandu, Ionela; Tabacu, Stefan; Ducu, Catalin

2017-10-01

The present study is focused on the life estimation of a rotating part as a component of an engine assembly namely the pulley of the coolant pump. The goal of the paper is to develop a model, supported by numerical analysis, capable to predict the lifetime of the part. Starting from functional drawing, CAD Model and technical specifications of the part a numerical model was developed. MATLAB code was used to develop a tool to apply the load over the selected area. The numerical analysis was performed in two steps. The first simulation concerned the inertia relief due to rotational motion about the shaft (of the pump). Results from this simulation were saved and the stress - strain state used as initial conditions for the analysis with the load applied. The lifetime of a good part was estimated. A defect was created in order to investigate the influence over the working requirements. It was found that there is little influence with respect to the prescribed lifetime.

Handbook for evaluation studies in virtual reality

DEFF Research Database (Denmark)

Livatino, Salvatore; Koeffel, Christina

2006-01-01

of human behavior including aspects of perception, action, and task-performance. The evaluation issue calls for multi- and interdisciplinary research activities, where technical expertise is combined with humanistic knowledge and methodology. Several experts in the field of VR as well as in the field...... in evaluation studies as well as students. The aim is also to facilitate multi-disciplinary activities through the use of an evaluation handbook which would be simple and focused on VR. The applicability of this guideline has been tested in two pilot studies, which showed how this handbook could successfully...... be employed to carry out pilot (and formal) evaluations....

Evaluation of methods for seismic analysis of nuclear fuel reprocessing plants, part 1

International Nuclear Information System (INIS)

Tokarz, F.J.; Murray, R.C.; Arthur, D.F.; Feng, W.W.; Wight, L.H.; Zaslawsky, M.

1975-01-01

Currently, no guidelines exist for choosing methods of structural analysis to evaluate the seismic hazard of nuclear fuel reprocessing plants. This study examines available methods and their applicability to fuel reprocessing plant structures. The results of this study should provide a basis for establishing guidelines recommending methods of seismic analysis for evaluating future fuel reprocessing plants. The approach taken is: (1) to identify critical plant structures and place them in four categories (structures at or near grade; deeply embedded structures; fully buried structures; equipment/vessels/attachments/piping), (2) to select a representative structure in each of the first three categories and perform static and dynamic analysis on each, and (3) to evaluate and recommend method(s) of analysis for structures within each category. The Barnwell Nuclear Fuel Plant is selected as representative of future commercial reprocessing plants. The effect of site characteristics on the structural response is also examined. The response spectra method of analysis combined with the finite element model for each category is recommended. For structures founded near or at grade, the lumped mass model could also be used. If a time history response is required, a time-history analysis is necessary. (U.S.)

Product meaning, affective use evaluation, and transfer : a preliminary study

OpenAIRE

Helfenstein, Sacha

2005-01-01

The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a) the affective evaluation of an obstructed use interaction, and (b) the transfer of emotion between devices presented as being either of the same or a different brand. Althou...

Radiographer-led breast boost localisation – A service evaluation study

International Nuclear Information System (INIS)

Smith, S.; Comins, C.

2015-01-01

A radiation boost to the tumour bed as part of breast conserving therapy reduces the rate of local recurrence. Radiographer-led planning for tangential field radiotherapy has been the practice at our centre since 2007. The transition from conventional simulation to computed tomography (CT) and virtual simulation enhanced the radiographer's role in the breast planning process. Electron boost mark ups continued to be marked up freehand by doctors using available imaging to determine tumour bed. The paper reports on a service evaluation undertaken to establish a change in practice for electron breast boosts to be simulated using the virtual simulator by suitably trained radiographers. The retrospective simulation of ten patients confirmed the consistency of radiographer tumour bed localisation, followed by the prospective simulation of ten patients' boost fields. The introduction of a radiographer-led planning breast boost service has given greater autonomy and job satisfaction to individuals as well as resulting in a cost effective use of available resources. - Highlights: • A service evaluation study was undertaken to train a radiographer to perform breast boost planning. • Retrospective breast boost planning established proposed technique was workable. • Prospective planning by radiographer proved their competence. • Introduction of new technique provided job satisfaction and service improvement

Civilian Power Program. Part 1, Summary, Current status of reactor concepts

Energy Technology Data Exchange (ETDEWEB)

Author, Not Given

1959-09-01

This study group covered the following: delineation of the specific objectives of the overall US AEC civilian power reactor program, technical objectives of each reactor concept, preparation of a chronological development program for each reactor concept, evaluation of the economic potential of each reactor type, a program to encourage the the development, and yardsticks for measuring the development. Results were used for policy review by AEC, program direction, authorization and appropriation requests, etc. This evaluation encompassed civilian power reactors rated at 25 MW(e) or larger and related experimental facilities and R&D. This Part I summarizes the significant results of the comprehensive effort to determine the current technical and economic status for each reactor concept; it is based on the 8 individual technical status reports (Part III).

Study design considerations in evaluating environmental impacts

Science.gov (United States)

Stan T. Lebow; Paul A. Cooper; Patricia Lebow

2006-01-01

The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

MIRD methodology. Part 2

International Nuclear Information System (INIS)

Gomez Parada, Ines

2004-01-01

This paper develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this second part, different methods for the calculation of the accumulated activity are presented, together with the effective half life definition. Different forms of Retention Activity curves are also shown. (author)

The Effectiveness Evaluation of Current Disinfectants on Pathogens Isolated from Surface of Different Parts of Shahid Sadughi Accidents Burns Hospital in City of Yazd

Directory of Open Access Journals (Sweden)

Fatemeh Sahlabadi

2016-03-01

Full Text Available Background: The burn unit is a suitable environment for the growth of pathogenic bacteria that can reduce these pathogens by appropriate disinfection methods. So, choosing an appropriate disinfectant and applying standard methods of disinfection can be effective in reducing nosocomial infections. The aim of this study is evaluation of efficacy of current disinfectants on pathogens isolated from surface of different parts of Shahid Sadughi accidents burns hospital in city of Yazd. Methods: In this study, the sampling method has done simple randomly and 240 samples were collected from 30 different parts of hospital surfaces (for every disinfectant 30 samples before and 30 samples after disinfection. The samples in the Microbiology laboratory of Medical Sciences University were cultured on blood agar and EMB agar culture. Colonies that were suspected to pathogens were identified by biochemical tests and their colony count was determined. Data were analyzed using Paired T-test. Results: The average of isolated bacteria at 4 parts of burn unit of hospital before disinfecting by Deconex 50 AF, Descoscid, Epimax SC and Silvosept was 58.02, 18897.28, 30989.05 and 38.52 respectively and after disinfecting was 12.8, 0.62, 1.65 and 5.09 respectively. Reducing of contamination in all disinfectants shown a significant difference (p<0.05. The most common isolated pathogens were Pseudomonas aeruginosa, Klebsiella, staphylococcus aureus, Enterobacter and Escherichia coli. Conclusion: The results showed that all disinfectants was effective on isolated pathogens and also have shown a significant difference (p<0.05 between the average of bacteria count before and after disinfection.

Diagnosing displaced four-part fractures of the proximal humerus: a review of observer studies

DEFF Research Database (Denmark)

Brorson, Stig; Bagger, Jens; Sylvest, Annette

2009-01-01

Displaced four-part fractures comprise 2-10 % of all proximal humeral fractures. The optimal treatment is unclear and randomised trials are needed. The conduct and interpretation of such trials is facilitated by a reproducible fracture classification. We aimed at quantifying observer agreement...... on the classification of displaced four-part fractures according to the Neer system. Published and unpublished data from five observer studies were reviewed. Observers agreed less on displaced four-part fractures than on the overall Neer classification. Mean kappa values for interobserver agreement ranged from 0.......16 to 0.48. Specialists agreed slightly more than fellows and residents. Advanced imaging modalities (CT and 3D CT) seemed to contribute more to classification of displaced four-part patterns than in less complex fracture patterns. Low observer agreement may challenge the clinical approach to displaced...

The Acquisition of Auxiliary Syntax: A Longitudinal Elicitation Study. Part 2: The Modals and Auxiliary DO

Science.gov (United States)

Rowland, Caroline F.; Theakston, Anna L.

2009-01-01

Purpose: The study of auxiliary acquisition is central to work on language development and has attracted theoretical work from both nativist and constructivist approaches. This study is part of a 2-part companion set that represents a unique attempt to trace the development of auxiliary syntax by using a longitudinal elicitation methodology. The…

PEEK versus titanium locking plates for proximal humerus fracture fixation: a comparative biomechanical study in two- and three-part fractures.

Science.gov (United States)

Schliemann, Benedikt; Seifert, Robert; Theisen, Christina; Gehweiler, Dominic; Wähnert, Dirk; Schulze, Martin; Raschke, Michael J; Weimann, Andre

2017-01-01

The high rigidity of metal implants may be a cause of failure after fixation of proximal humerus fractures. Carbon fiber-reinforced polyetheretherketone (PEEK) plates with a modulus similar to human cortical bone may help to overcome this problem. The present study assesses the biomechanical behavior of a PEEK plate compared with a titanium locking plate. Unstable two- and three-part fractures were simulated in 12 pairs of cadaveric humeri and were fixed with either a PEEK or a titanium locking plate using a pairwise comparison. With an optical motion capture system, the stiffness, failure load, plate bending, and the relative motion at the bone-implant interface and at the fracture site were evaluated. The mean load to failure for two- and three-part fracture fixations was, respectively, 191 N (range 102-356 N) and 142 N (range 102-169 N) in the PEEK plate group compared with 286 N (range 191-395 N) and 258 N (range 155-366 N) in the titanium locking plate group. The PEEK plate showed significantly more bending in both the two- and three-part fractures (p PEEK plate showed lower fixation strength and increased motion at the bone-implant interface compared with a titanium locking plate.

Recurring part arrangements in shape collections

KAUST Repository

Zheng, Youyi; Cohen-Or, Daniel; Averkiou, Melinos; Mitra, Niloy J.

2014-01-01

Extracting semantically related parts across models remains challenging, especially without supervision. The common approach is to co-analyze a model collection, while assuming the existence of descriptive geometric features that can directly identify related parts. In the presence of large shape variations, common geometric features, however, are no longer sufficiently descriptive. In this paper, we explore an indirect top-down approach, where instead of part geometry, part arrangements extracted from each model are compared. The key observation is that while a direct comparison of part geometry can be ambiguous, part arrangements, being higher level structures, remain consistent, and hence can be used to discover latent commonalities among semantically related shapes. We show that our indirect analysis leads to the detection of recurring arrangements of parts, which are otherwise difficult to discover in a direct unsupervised setting. We evaluate our algorithm on ground truth datasets and report advantages over geometric similarity-based bottom-up co-segmentation algorithms. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

Recurring part arrangements in shape collections

KAUST Repository

Zheng, Youyi

2014-05-01

Extracting semantically related parts across models remains challenging, especially without supervision. The common approach is to co-analyze a model collection, while assuming the existence of descriptive geometric features that can directly identify related parts. In the presence of large shape variations, common geometric features, however, are no longer sufficiently descriptive. In this paper, we explore an indirect top-down approach, where instead of part geometry, part arrangements extracted from each model are compared. The key observation is that while a direct comparison of part geometry can be ambiguous, part arrangements, being higher level structures, remain consistent, and hence can be used to discover latent commonalities among semantically related shapes. We show that our indirect analysis leads to the detection of recurring arrangements of parts, which are otherwise difficult to discover in a direct unsupervised setting. We evaluate our algorithm on ground truth datasets and report advantages over geometric similarity-based bottom-up co-segmentation algorithms. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

Studying at University as Part of Student Life and Identity Construction

Science.gov (United States)

Lairio, Marjatta; Puukari, Sauli; Kouvo, Anne

2013-01-01

The study examines how students see their time at university as part of life and identity construction. The research data are based on a questionnaire administered to Finnish-speaking undergraduates at the University of Jyvaskyla on the topic "How do you see your time as a student from the perspective of life construction?" A total of…

Effect of Temperature on Acoustic Evaluation of Standing trees and logs: Part 1-Laboratory investigation

Science.gov (United States)

Shan Gao; Xiping Wang; Lihai Wang; R. Bruce. Allison

2012-01-01

The goals of this study were to investigate the effect of environment temperature on acoustic velocity of standing trees and green logs and to develop workable models for compensating temperature differences as acoustic measurements are performed in different climates and seasons. The objective of Part 1 was to investigate interactive effects of temperature and...

Scientific evaluation at the CEA

International Nuclear Information System (INIS)

1999-01-01

This report presents a statement of the scientific and technical activity of the French atomic energy commission (CEA) for the year 1998. This evaluation is made by external and independent experts and requires some specific dispositions for the nuclear protection and safety institute (IPSN) and for the direction of military applications (DAM). The report is divided into 5 parts dealing successively with: part 1 - the CEA, a public research organization (civil nuclear research, technology research and transfers, defence activities); the scientific and technical evaluation at the CEA (general framework, evaluation of the IPSN and DAM); part 2 - the scientific and technical councils (directions of fuel cycle, of nuclear reactors, and of advanced technologies); part 3 - the scientific councils (directions of matter and of life sciences); the nuclear protection and safety institute; the direction of military applications; part 4 - the corresponding members of the evaluation; part 5 - the list of scientific and technical councils and members. (J.S.)

Coumarins from the aerial parts of Prangos uloptera (Apiaceae

Directory of Open Access Journals (Sweden)

Seyed Mehdi Razavi

Full Text Available Phytochemical studies on the aerial parts of Prangos uloptera, an endemic Iranian species of the genus Prangos, yielded five coumarins, xanthotoxin (1, prangenin (2, scopoletin (3, deltoin (4 and prangolarin (5. The structures of these coumarins were elucidated by spectroscopic means, and the antioxidant potential of 1-5 was evaluated by the DPPH assay. The chemotaxonomic significance of 1-5 is also discussed.

Systematic review and meta-analysis of studies evaluating diagnostic test accuracy: A practical review for clinical researchers-Part I. general guidance and tips

International Nuclear Information System (INIS)

Kim, Kyung Won; Choi, Sang Hyun; Huh, Jimi; Park, Seong Ho; Lee, June Young

2015-01-01

In the field of diagnostic test accuracy (DTA), the use of systematic review and meta-analyses is steadily increasing. By means of objective evaluation of all available primary studies, these two processes generate an evidence-based systematic summary regarding a specific research topic. The methodology for systematic review and meta-analysis in DTA studies differs from that in therapeutic/interventional studies, and its content is still evolving. Here we review the overall process from a practical standpoint, which may serve as a reference for those who implement these methods

A comparative study on antioxidant activity of different parts of lotus (Nelumbo nuficera Gaertn rhizome

Directory of Open Access Journals (Sweden)

Dongmei YANG

Full Text Available Abstract In this study, the antioxidant activities of different parts of lotus (Nelumbo nuficera Gaertn rhizome were compared. The total phenolic content of lotus rhizome was determined, and Ferric reducing antioxidant power (FRAP assay, 1,1-diphenyl-2-picrylhydrazyl hydrate (DPPH radical-scavenging assay and β-carotene-linoleic acid assay were performed to assess the antioxidant activity of lotus rhizome. Results showed that there was a significant difference in total phenolic content and antioxidant activity between any two of four parts of lotus rhizome. The order of total phenolic content and antioxidant activity in different parts of lotus rhizome was as follows: peel of old lotus rhizome > peel of young lotus rhizome > flesh of old lotus rhizome > flesh of young lotus rhizome. The total phenol content is significantly positive correlated with the antioxidant activity in different parts of lotus rhizome. This study has provided a basis for further exploring the antioxidant components in lotus rhizome.

Crescent Evaluation : appendix B : state case study evaluation report

Science.gov (United States)

1994-02-01

The state case study evaluation approach uniquely captured an understanding of the potential of such a system by documenting the experiences, issues, and opportunities of selected key state government personnel from a cross-section of involved agenci...

Ocean Thermal Energy Converstion (OTEC) test facilities study program. Final report. Volume II. Part B

Energy Technology Data Exchange (ETDEWEB)

None

1977-01-17

Results are presented of an 8-month study to develop alternative non-site-specific OTEC facilities/platform requirements for an integrated OTEC test program which may include land and floating test facilities. Volume II--Appendixes is bound in three parts (A, B, and C) which together comprise a compendium of the most significant detailed data developed during the study. Part B provides an annotated test list and describes component tests and system tests.

Biodiesel feasibility study: An evaluation of material compatibility; performance; emission and engine durability

Energy Technology Data Exchange (ETDEWEB)

Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)

2011-02-15

Biodiesel, derived from the transesterification of vegetable oils or animal fats, is composed of saturated and unsaturated long-chain fatty acid alkyl esters. In spite of having some application problems, recently it is being considered as one of the most promising alternative fuels in internal combustion engine. From scientific literatures, this paper has collected and analyzed the data on both advantages and disadvantages of biodiesel over conventional diesel. Since the aim of this study is to evaluate the biodiesel feasibility in automobiles, the first section is dedicated to materials compatibility in biodiesel as compared to that in diesel. The highest consensus is related to enhanced corrosion of automotive parts due to its compositional differences. In the subsequent sections, data on performance, emission and engine durability have been analyzed and compared. In this case, the highest consensus is found in reducing emissions as well as in increasing moving parts sticking, injector coking and filter plugging. This paper has also summarized the factors of biodiesel in contributing these technical performances. (author)

[Postgraduate studies in public health: the problem of efficiency evaluation].

Science.gov (United States)

Boczkowski, Andrzej

2003-01-01

The satisfaction of customer is the main measure and the most important, generally recognized criterion for evaluating the quality of products and services. In the case of education and training, the quality is frequently understood as effectiveness, i.e., the degree to what educational objectives of a training institution are met; the objectives previously formulated on the basis of analyzed and defined demands and expectations of customers (clients). In the first part of the paper: (1) the problems related to the question who in fact is the customer in the context of an institution providing education in public health are discussed; (2) a proposal for resolving these problems is presented; and (3) the main directions of evaluation activities, which should be undertaken under monitoring and effectiveness assessment of postgraduate training in public health are pointed out. In the years 1998-2002, the students' assessment data on educational programs, curriculum contents and subject teachers in the field of postgraduate studies in the School of Public Health, Nofer Institute of Occupational Medicine, Łódź, were collected with the help of specially-designed evaluation questionnaires. The data on the students' self-assessment of gained professional competencies were also collected. All students who completed the School of Public Health in these years were subjected to the evaluation inquiries. The data collected were analyzed. Due to the analysis it was possible to define: the quality of the curriculum contents, as well as the professional and didactic skills of the teaching staff as perceived by the students; the degree to what particular curriculum in public health contributed to the increase in professional competence as perceived by the students; the degree to what particular teaching subjects influenced the students' knowledge of and skills in Public Health. The results obtained provided information very useful in the teaching process, designing of

The activity of the Ulsan fault system based on marine terrace age study at the southeastern part of Korean peninsula

International Nuclear Information System (INIS)

Inoue, Daiei; Weon-Hack, Choi

2006-01-01

The activity evaluation of the Ulsan fault system (UFS) based on marine terrace age study in the southeastern part of Korean peninsula has been carried out. (1) The marine terrace distribution map along the southeastern coast of Korean peninsula has been distributed three wide terraces and several sub-terraces. The age of the above three terraces was determined by the discovery of wide tephras to be MIS5e, 7 and 9 from the lowest, respectively. (2) The active fault map along UFS was constructed. There will be the possibility that the UFS will be divided into three segments by the feature of lineaments. (3) The fault bounds between mountain at the eastern side, and plain at the western side in the most part of fault. It is interpreted that the UFS builds up the eastern mountain as a reverse movement fault. The latest activity of this fault system was clarified at the two localities by outcrop and trench investigation. The latest activity at Galgok-ri located in the northern part of the fault was occurred between 2,840 and 1,440 yBP. It was found to be between 7,470 and 2,990 yBP at Gaegok-ri, located in the central part of the fault. The latest activity at the Wangsan, which is between Galgok-ri and Gaegok-ri, was older than 7,000 yBP. The latest activity of the UFS differs between studied points. (4) The vertical slip rate of the UFS was calculated from the amount of vertical deformation and the age of terraces. Its range was between several cm to 20 cm in the 1000 years. This value corresponds to lower B and C class activity defined in Japan. (author)

Part 1: characterization of beam synthesized catalytic materials. Part 2: further development of molecular SIMS

International Nuclear Information System (INIS)

Scheifers, S.M.

1985-01-01

Part I of this thesis concerns characterization of catalyst materials prepared by an ion beam implanter and by a multiple expansion cluster source. Ion beam synthesis was carried out on a 250-kev ion implanter. After assembling a special reaction chamber, zeolites were implanted with phosphorous and iron. This work contributed to development of a sputter reactor for ion beam synthesis. Silver catalysts were examined in a reactor designed, built and evaluated for catalysts produced by the sputter reactor and by a multiple expansion cluster source. Small surface area silver foil catalysts and silver cluster catalysts showed kinetic activity for epoxidation of ethylene. Positive results for the small surface area silver cluster catalyst demonstrate the feasibility of studying these catalysts with the special reactor. Part 2 concerns fundamentals and applications of secondary ion mass spectrometry. A data system was implemented for a secondary ion mass spectrometer that involved design and construction of a computer interface. Software routines for the interface were written in assembly language for increased operation efficiency

Volatile particles formation during PartEmis: a modelling study

Directory of Open Access Journals (Sweden)

X. Vancassel

2004-01-01

Full Text Available A modelling study of the formation of volatile particles in a combustor exhaust has been carried out in the frame of the PartEmis European project. A kinetic model has been used in order to investigate nucleation efficiency of the H2O-H2SO4 binary mixture in the sampling system. A value for the fraction of the fuel sulphur S(IV converted into S(VI has been indirectly deduced from comparisons between model results and measurements. In the present study, ranges between roughly 2.5% and 6%, depending on the combustor settings and on the value assumed for the parameter describing sulphuric acid wall losses. Soot particles hygroscopicity has also been investigated as their activation is a key parameter for contrail formation. Growth factors of monodisperse particles exposed to high relative humidity (95% have been calculated and compared with experimental results. The modelling study confirms that the growth factor increases as the soot particle size decreases.

Knowledge and skills needed to improve as preceptor: development of a continuous professional development course - a qualitative study part I.

Science.gov (United States)

Bengtsson, Mariette; Carlson, Elisabeth

2015-01-01

Preceptors are expected to have the skills to be able to form an effective learning environment and facilitate a constructive clinical learning experience for students and new employees. Internationally, access to education for preceptors varies, with preceptors worldwide requesting more education in preceptorship. This article is based on a two-part study focusing on both the development and evaluation of a continuous, credit-bearing professional development course. The aim of this part of the study was to investigate and include preceptors' requests and educational needs when developing a continuous professional development course on an advanced level. This study used a qualitative research approach. In total, 64 preceptors (62 women and two men) answered one single written, self-administered global question online. The participants were all interested in teaching and had completed an undergraduate training in preceptorship. The collected data was analysed by content analysis inspired by Burnard's description of the method. The participating preceptors illuminated two main themes: 'Tools for effective precepting of students and healthcare professionals' and 'in-depth knowledge and understanding of preceptorship in an academic setting'. The results suggest that vital components for preceptor preparation could be a) teaching and learning strategies, b) reflective and critical reasoning, c) communication models, d) the role of the preceptor, and e) preceptorship. Using the results from this study as a guide, a continuous professional development course was designed to assist preceptors in deepening their knowledge of preceptorship in regard to planning, leading and implementing educational activities directed at students, healthcare professionals, patients and their families. The course content focuses on skills needed for preceptorship and is based on adult learning principles. A continuous, credit-bearing professional development course must include an exam by

Hand function evaluation: a factor analysis study.

Science.gov (United States)

Jarus, T; Poremba, R

1993-05-01

The purpose of this study was to investigate hand function evaluations. Factor analysis with varimax rotation was used to assess the fundamental characteristics of the items included in the Jebsen Hand Function Test and the Smith Hand Function Evaluation. The study sample consisted of 144 subjects without disabilities and 22 subjects with Colles fracture. Results suggest a four factor solution: Factor I--pinch movement; Factor II--grasp; Factor III--target accuracy; and Factor IV--activities of daily living. These categories differentiated the subjects without Colles fracture from the subjects with Colles fracture. A hand function evaluation consisting of these four factors would be useful. Such an evaluation that can be used for current clinical purposes is provided.

Waste Handling Equipment Development Test and Evaluation Study

International Nuclear Information System (INIS)

R.L. Tome

1998-01-01

The purpose of this study is to identify candidate Monitored Geologic Repository (MGR) surface waste handling equipment for development testing. This study will also identify strategies for performing the development tests. Development testing shall be implemented to support detail design and reduce design risks. Development testing shall be conducted to confirm design concepts, evaluate alternative design concepts, show the availability of needed technology, and provide design documentation. The candidate equipment will be selected from MGR surface waste handling equipment that is the responsibility of the Management and Operating Contractor (M and O) Surface Design Department. The equipment identified in this study is based on Viability Assessment (VA) design. The ''Monitored Geologic Repository Test and Evaluation Plan'' (MGR T and EP), Reference 5.1, was used as a basis for this study. The MGR T and EP reflects the extent of test planning and analysis that can be conducted, given the current status of the MGR requirements and latest VA design information. The MGR T and EP supports the appropriate sections in the license application (LA) in accordance with 10 CFR 60.2 1(c)(14). The MGR T and EP describes the following test activities: site characterization to confirm, by test and analysis, the suitability of the Yucca Mountain site for housing a geologic repository; development testing to investigate and document design concepts to reduce risk; qualification testing to verify equipment compliance with design requirements, specifications, and regulatory requirements; system testing to validate compliance with MGR requirements, which include the receipt, handling, retrieval, and disposal of waste; periodic performance testing to verify preclosure requirements and to demonstrate safe and reliable MGR operation; and performance confirmation modeling, testing, and analysis to verify adherence to postclosure regulatory requirements. Development test activities can be

Process and part filling control in micro injection molding

DEFF Research Database (Denmark)

Tosello, Guido; Hansen, Hans Nørgaard; Schoth, Andreas

2008-01-01

The influence of process parameters on μ-injection molding (μIM) and on μ-injection molded parts has been investigated using Design of Experiments. A mold with a sensor applied at injection location was used to monitor actual injection pressure and to determine the cavity filling time. Flow markers...... position was measured on the polymer μ-parts to evaluate filling behavior of the polymer melt flowing through μ-features. Experimental results obtained under different processing conditions were evaluated to correlate the process parameter levels influence on the selected responses. Results showed...... that the injection speed in one of the most influencing process parameters on the μIM process and on the μ-parts filling....

39-week carcinogenicity study with cyclosporin A in XPA-/- mice, wild type mice and XPA-/-.P53+/- double transgenic mice. Part of the ILSI/HESI Program on Alternative Methods for Carcinogenicity Testing

NARCIS (Netherlands)

Beems RB; Kreijl CF van; Steeg H van; LPI; LEO

2002-01-01

The objective of this study was to evaluate the carcinogenic response of cyclosporin A in XPA-/- mice having a C57BL/6 background. XPA-/- mice are deficient in nucleotide excision repair and have shown increased susceptibility to genotoxic carcinogens and uv-light. The study was part of a world-wide

Nuclear Fuel Cycle Evaluation and Real Options

Directory of Open Access Journals (Sweden)

L. Havlíček

2008-01-01

Full Text Available The first part of this paper describes the nuclear fuel cycle. It is divided into three parts. The first part, called Front-End, covers all activities connected with fuel procurement and fabrication. The middle part of the cycle includes fuel reload design activities and the operation of the fuel in the reactor. Back-End comprises all activities ensuring safe separation of spent fuel and radioactive waste from the environment. The individual stages of the fuel cycle are strongly interrelated. Overall economic optimization is very difficult. Generally, NPV is used for an economic evaluation in the nuclear fuel cycle. However the high volatility of uranium prices in the Front-End, and the large uncertainty of both economic and technical parameters in the Back-End, make the use of NPV difficult. The real option method is able to evaluate the value added by flexibility of decision making by a company under conditions of uncertainty. The possibility of applying this method to the nuclear fuel cycle evaluation is studied. 

Dogmas in the assessment of usability evaluation methods

DEFF Research Database (Denmark)

Hornbæk, Kasper

2010-01-01

Usability evaluation methods (UEMs) are widely recognised as an essential part of systems development. Assessments of the performance of UEMs, however, have been criticised for low validity and limited reliability. The present study extends this critique by describing seven dogmas in recent work ...... research approaches that may help move beyond the dogmas. In particular, we emphasise detailed studies of evaluation processes, assessments of the impact of UEMs on design carried out in real-world systems development and analyses of how UEMs may be combined......Usability evaluation methods (UEMs) are widely recognised as an essential part of systems development. Assessments of the performance of UEMs, however, have been criticised for low validity and limited reliability. The present study extends this critique by describing seven dogmas in recent work...... on UEMs. The dogmas include using inadequate procedures and measures for assessment, focusing on win-lose outcomes, holding simplistic models of how usability evaluators work, concentrating on evaluation rather than on design and working from the assumption that usability problems are real. We discuss...

Evaluating evaluation as a communication process. What role for formative evaluation in ICT-based knowledge acquisition?

Directory of Open Access Journals (Sweden)

USEILLE Philippe

2005-10-01

Full Text Available This article examines how formative evaluation as a communication process contributes to knowledge acquisition in using ICT (Information and Communication Technologies. Previous studies, especially in the field of education and training, have shown that formative evaluation plays a crucial part in the learning process because it contributes to learning to learn. Through formative evaluation, the learner becomes aware of errors and can adjust learning strategies to the situation. In addition, formative evaluation provides the teaching side with significant and useful information. Consequently, ICT researches have developed a wide range of solutions for this specific purpose. It is however difficult to check the efficiency of these tools by considering the effects of ICT in the knowledge acquisition process. I suggest that formative evaluation includes also a communication system that has an effect on the learning process. This study tackles the issue by proposing an alternative approach to formative evaluation that considers it as both a learning and a communication process. The study is based on SADT (Structure Analysis and Design Technique that provides a suitable description for the whole complex communication process. It allows a rigorous understanding and identification of the variables of evaluation as a communication process in order to take care of an ICT frame. Finally, this article outlines a multidisciplinary method to evaluate formative evaluation by focusing on the validity facets of the communication process. Keywords: formative evaluation, communication process, validity criteria, ICT training context.

Recreation studied from above : airphoto interpretation as input into land evaluation for recreation

NARCIS (Netherlands)

Zee, van der D.

1992-01-01

Recreation and tourism are of growing importance not only in the industrialized part of the world, but also In developing countries. Remote sensing and in particular airphoto interpretation can be used in several ways as input into land evaluation for recreation and tourism. An inventory of

Evaluating the Evaluators: Comparative Study of High School Newspaper Critique Services.

Science.gov (United States)

Davis, Nancy

High school publication staffs depend on national critique services as a major means of evaluation and recognition, but most have no measure of how one critique service compares to the others, because they can afford the entry fee for only one evaluation. Thus, a study was conducted to test the validity of three major national critique…

FORMATION OF TOILET HABITS IN CHILDREN IN MOSCOW. RETROSPECTIVE STUDY RESULTS. PART II

Directory of Open Access Journals (Sweden)

G. A. Karkashadze

2013-01-01

Full Text Available The results of the first Russian study of toilet habits formation in children have been obtained. The article was planned to be published in 2 subsequent parts due to the extensiveness of the material. This article is the 2nd part*. It presents and comments on the remaining part of results in the form of the connection between main parameters and characteristics of toilet habits training processes and physiological, psychological and social factors; it also presents the discussion and conclusions. Comparative data (with foreign studies is given. A multitude of both physiological and social factors affect the process of children’s toilet habits training. The following physiological factors have been revealed: stool frequency, physiological involuntary night urination, peculiarities of falling asleep and pernicious habits – processes, which reflect the intestinal motility regulation and defecation states, urination control and neuropsychic activity. The selected training strategy and tactics, style of communication with a child also affect the training process. The most influential family-social factors in terms of toilet habits training processes are: two- or one-parent family, mother’s education and twins in the family. 

Study on Applicability of 10 CFR Part 21 to APR1400 DC Project

International Nuclear Information System (INIS)

Shin, He Young; Lee, Do Hwan; Lim, Jae Yong

2014-01-01

The tools such as NCR (non conformance report), CAR (corrective action request) and CAP (corrective action program) are widely used for that purpose based upon the rule of 10 CFR Part 50 Appendix B and the ASME Code NQA-1 requirements. These are the tools for a utility, as a purchaser taking over related basic components and services, to ensure strong quality assurance. During the conduct of the project for the acquisition of the standard design certification for APR1400 nuclear power plants from the U. S. NRC (APR1400 DC Project), a new CAP procedure that is appropriate to conduct this unique project was developed. However, it was also recommended to comply with the requirements under 10 CFR Part 21 which enhances nuclear safety quality assurances. Consequently, a new QA procedure is developed in order to deal with the 10 CFR Part 21 issues and this is integrated to the CAP procedure In this paper, the current corrective action program for the APR1400 DC project is introduced and the result of the study on the applicability of 10 CFR Part 21 to the project is indicated. In addition, further improving aspects to be considered are identified. As a frontier project to obtain the standard design certification for APR 1400 model from the U. S. NRC, a modified CAP procedure is developed and enhanced to deal with safety concerning issues in accordance with 10 CFR Part 21. In addition, the newly established QA procedure to directly control the reportability on 10 CFR Part 21 is interfaced into the existing CAP procedure

First international 26Al interlaboratory comparison - Part II

International Nuclear Information System (INIS)

Merchel, Silke; Bremser, Wolfram

2005-01-01

After finishing Part I of the first international 26 Al interlaboratory comparison with accelerator mass spectrometry (AMS) laboratories [S. Merchel, W. Bremser, Nucl. Instr. and Meth. B 223-224 (2004) 393], the evaluation of Part II with radionuclide counting laboratories took place. The evaluation of the results of the seven participating laboratories on four meteorite samples shows a good overall agreement between laboratories, i.e. it does not reveal any statistically significant differences if results are compared sample-by-sample. However, certain interlaboratory bias is observed with a more detailed statistical analysis including some multivariate approaches

A qualitative phenomenological study: Enhanced, risk-based FAA oversight on part 145 maintenance practices

Science.gov (United States)

Sheehan, Bryan G.

The purpose of this qualitative phenomenological study was to examine the phenomenon of enhanced, risk-based Federal Aviation Administration (FAA) oversight of Part 145 repair stations that performed aircraft maintenance for Part 121 air carriers between 2007 and 2014 in Oklahoma. Specifically, this research was utilized to explore what operational changes have occurred in the domestic Part 145 repair station industry such as variations in management or hiring practices, training, recordkeeping and technical data, inventory and aircraft parts supply-chain logistics, equipment, and facilities. After interviewing 12 managers from Part 145 repair stations in Oklahoma, six major theme codes emerged from the data: quality of oversight before 2007, quality of oversight after 2007, advantages of oversight, disadvantages of oversight, status quo of oversight, and process improvement . Of those six major theme codes, 17 subthemes appeared from the data that were used to explain the phenomenon of enhanced oversight in the Part 145 repair station industry. Forty-two percent of the participants indicated a weak FAA oversight system that has hindered the continuous process improvement program in their repair stations. Some of them were financially burdened after hiring additional full-time quality assurance inspectors to specifically manage enhanced FAA oversight. Notwithstanding, the participants of the study indicated that the FAA must apply its surveillance on a more standardized and consistent basis. They want to see this standardization in how FAA inspectors interpret regulations and practice the same quality of oversight for all repair stations, particularly those that are repeat violators and fail to comply with federal aviation regulations. They believed that when the FAA enforces standardization on a consistent basis, repair stations can become more efficient and safer in the performance of their scope of work for the U.S. commercial air transportation industry.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

Science.gov (United States)

Hanley, G. M.

1979-01-01

Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

Justification of evaluation criteria of the effectiveness of choice of spare parts stored in the warehouse of the transport company to maintain in good condition of its rolling stock

Directory of Open Access Journals (Sweden)

Antonyuk O.P.

2016-08-01

Full Text Available Support rolling stock of transport in good repair can be carried out using replacement parts that are stored on in the warehouses of transport enterprise and spare parts that are purchased as the need arises. For the uninterrupted transport services transport enterprise must have a certain amount of stock of spare parts at a given time. Rational organization of storage and inventory control of spare parts for motor plant affects the reducing operating costs and improving profitability of the transportation process. In the article the criteria for evaluating the effectiveness of choice of spare parts stored in the warehouse of the transport company to maintain in good condition of its rolling stock, taking into account the totality of the costs of purchase, transportation and storage of spare parts. Using these criteria allows to determine the advisability of keeping spare parts in stock of transport and procurement of necessary spare parts, provided the minimal costs of spare parts.

osDesign: An R Package for the Analysis, Evaluation, and Design of Two-Phase and Case-Control Studies

Directory of Open Access Journals (Sweden)

Sebastien Haneuse

2011-08-01

Full Text Available The two-phase design has recently received attention in the statistical literature as an extension to the traditional case-control study for settings where a predictor of interest is rare or subject to missclassification. Despite a thorough methodological treatment and the potential for substantial efficiency gains, the two-phase design has not been widely adopted. This may be due, in part, to a lack of general-purpose, readily-available software. The osDesign package for R provides a suite of functions for analyzing data from a two-phase and/or case-control design, as well as evaluating operating characteristics, including bias, efficiency and power. The evaluation is simulation-based, permitting flexible application of the package to a broad range of scientific settings. Using lung cancer mortality data from Ohio, the package is illustrated with a detailed case-study in which two statistical goals are considered: (i the evaluation of small-sample operating characteristics for two-phase and case-control designs and (ii the planning and design of a future two-phase study.

Textbooks evaluation

OpenAIRE

Tauchmannová, Iva

2009-01-01

This thesis deals with an evaluation of textbooks and their operation at school. The theoretical part clarifies the purport of the term a textbook, functions and a structure of textbooks, and describes a text of textbooks, parameters of its evaluation, and the extratextual components of textbooks. It presents methods of work with a textbook and research into textbooks. The empirical part describes a research that was aimed to learn whether textbooks fit to modern parameters of textbooks. Furt...

Dissociative Part-Dependent Resting-State Activity in Dissociative Identity Disorder : A Controlled fMRI Perfusion Study

NARCIS (Netherlands)

Schlumpf, Yolanda R.; Reinders, Antje A. T. S.; Nijenhuis, Ellert R. S.; Luechinger, Roger; van Osch, Matthias J. P.; Jaencke, Lutz

2014-01-01

Background: In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part'' (EP) and the "Apparently Normal Part'' (ANP), have

Part 6: Forest monitoring

International Nuclear Information System (INIS)

1997-01-01

In this part the results of forest monitoring on Hungarian and Slovak territory are presented. The two countries examine the growth and the health conditions of trees in similar ways. The monitoring sites in the Slovak and Hungarian territories, included in the joint monitoring, are shown on figure. The Slovak Party has already evaluated the wood yield data for 1996, the weekly girth growth observations in 1996 were not performed yet. So far on the Hungarian side only the weekly girth growth data are available for the year 1996, the wood yield data for 1996 are being processed. In the evaluation of Hungarian side only the results obtained for the period from 1992 to 1995 were analysed. Moreover, on the Slovak side an evaluation of the health conditions of trees based on aerial was carried out. The Hungarian party did not carried out such a survey, therefore the evaluation is based only on field (on-the-spot) observations

An evaluation of a model for the systematic documentation of hospital based health promotion activities: results from a multicentre study

DEFF Research Database (Denmark)

Tønnesen, Hanne; Christensen, Mette E; Groene, Oliver

2007-01-01

The first step of handling health promotion (HP) in Diagnosis Related Groups (DRGs) is a systematic documentation and registration of the activities in the medical records. So far the possibility and tradition for systematic registration of clinical HP activities in the medical records...... and in patient administrative systems have been sparse. Therefore, the activities are mostly invisible in the registers of hospital services as well as in budgets and balances.A simple model has been described to structure the registration of the HP procedures performed by the clinical staff. The model consists...... of two parts; first part includes motivational counselling (7 codes) and the second part comprehends intervention, rehabilitation and after treatment (8 codes).The objective was to evaluate in an international study the usefulness, applicability and sufficiency of a simple model for the systematic...

Risk of perforation using rigid oesophagoscopy in the distal part of oesophagus

DEFF Research Database (Denmark)

Wennervaldt, Kasper; Melchiors, Jacob

2012-01-01

Endoscopic examination and treatment of disorders in the oesophagus have been a part of the otolaryngological specialty since the introduction of the rigid endoscope. Today, both flexible and rigid oesophagoscopy (RO) is used to that end. The aim of this study was to evaluate the safety of the RO....

Evaluation and perceived results of moral case deliberation: A mixed methods study.

Science.gov (United States)

Janssens, Rien M J P A; van Zadelhoff, Ezra; van Loo, Ger; Widdershoven, Guy A M; Molewijk, Bert A C

2015-12-01

Moral case deliberation is increasingly becoming part of various Dutch healthcare organizations. Although some evaluation studies of moral case deliberation have been carried out, research into the results of moral case deliberation within aged care is scarce. How did participants evaluate moral case deliberation? What has moral case deliberation brought to them? What has moral case deliberation contributed to care practice? Should moral case deliberation be further implemented and, if so, how? Quantitative analysis of a questionnaire study among participants of moral case deliberation, both caregivers and team leaders. Qualitative analysis of written answers to open questions, interview study and focus group meetings among caregivers and team leaders. Caregivers and team leaders in a large organization for aged care in the Netherlands. A total of 61 moral case deliberation sessions, carried out on 16 care locations belonging to the organization, were evaluated and perceived results were assessed. Participants gave informed consent and anonymity was guaranteed. In the Netherlands, the law does not prescribe independent ethical review by an Institutional Review Board for this kind of research among healthcare professionals. Moral case deliberation was evaluated positively by the participants. Content and atmosphere of moral case deliberation received high scores, while organizational issues regarding the moral case deliberation sessions scored lower and merit further attention. Respondents indicated that moral case deliberation has the potential to contribute to care practice as relationships among team members improve, more openness is experienced and more understanding for different perspectives is fostered. If moral case deliberation is to be successfully implemented, top-down approaches should go hand in hand with bottom-up approaches. The relevance of moral case deliberation for care practice received wide acknowledgement from the respondents. It can contribute

Patients’ Perceptions of Endodontic Treatment as Part of Public Health Services: A Qualitative Study

Directory of Open Access Journals (Sweden)

José Leonardo Barbosa Melgaço-Costa

2016-04-01

Full Text Available Evaluations by patients constitute an important part of the process of improving health services. This study examined patients’ perceptions of secondary dental care in three cities in Minas Gerais, Brazil based on the endodontic treatment received. Data were collected using semi-structured interviews (addressing access, treatment and results and a field diary (direct observations and report of professionals. The interviews were audiotaped, fully transcribed, and analyzed using content analysis. Two principal themes were identified: access to service and quality of service. The difficulties in accessing service were associated with the insufficient number of professionals to meet the high demand for endodontic treatment, problems in referring from primary to secondary care and geographic barriers. Service quality was related to the presence/absence of pain and anxiety that patients experienced, the time and number of sessions required to complete treatment, how patients were treated by dentists, and whether those patients would recommend the service to other patients. Access to endodontic treatment was a problem emphasized by users, and satisfaction with the quality of the service was more related to how patients were treated than to the technical competence of the dentist.

Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts

Science.gov (United States)

Dolimont, Adrien; Rivière-Lorphèvre, Edouard; Ducobu, François; Backaert, Stéphane

2018-05-01

Additive manufacturing is growing faster and faster. This leads us to study the functionalization of the parts that are produced by these processes. Electron Beam melting (EBM) is one of these technologies. It is a powder based additive manufacturing (AM) method. With this process, it is possible to manufacture high-density metal parts with complex topology. One of the big problems with these technologies is the surface finish. To improve the quality of the surface, some finishing operations are needed. In this study, the focus is set on chemical polishing. The goal is to determine how the chemical etching impacts the dimensional accuracy and the surface roughness of EBM parts. To this end, an experimental campaign was carried out on the most widely used material in EBM, Ti6Al4V. Different exposure times were tested. The impact of these times on surface quality was evaluated. To help predicting the excess thickness to be provided, the dimensional impact of chemical polishing on EBM parts was estimated. 15 parts were measured before and after chemical machining. The improvement of surface quality was also evaluated after each treatment.

Scalar isoscalar part of the hyperon-nucleon interaction

International Nuclear Information System (INIS)

Sasaki, K.; Oset, E.; Vicente Vacas, M.J.

2007-01-01

We study the central part of the ΛN potential by considering the correlated and uncorrelated two-meson exchange besides the ω exchange contribution. The correlated two-meson is evaluated in a chiral unitary approach. We find that a short-range repulsion is generated by the correlated two-meson potential which also produces an attraction in the intermediate distance region. The uncorrelated two-meson exchange produces a sizeable attraction in all cases which is counterbalanced by ω exchange contribution. (orig.)

Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part I: Initial characterizations

International Nuclear Information System (INIS)

Dubarry, Matthieu; Truchot, Cyril; Cugnet, Mikael; Liaw, Bor Yann; Gering, Kevin; Sazhin, Sergiy; Jamison, David; Michelbacher, Christopher

2011-01-01

Evaluating commercial Li-ion batteries presents some unique benefits. One of them is to use cells made from established fabrication process and form factor, such as those offered by the 18650 cylindrical configuration, to provide a common platform to investigate and understand performance deficiency and aging mechanism of target chemistry. Such an approach shall afford us to derive relevant information without influence from processing or form factor variability that may skew our understanding on cell-level issues. A series of 1.9 Ah 18650 lithium ion cells developed by a commercial source using a composite positive electrode comprising (LiMn1/3Ni1/3Co1/3O2 + LiMn2O4) is being used as a platform for the investigation of certain key issues, particularly path-dependent aging and degradation in future plug-in hybrid electric vehicle (PHEV) applications, under the US Department of Energy's Applied Battery Research (ABR) program. Here we report in Part I the initial characterizations of the cell performance and Part II some aspects of cell degradation in 2C cycle aging. The initial characterizations, including cell-to-cell variability, are essential for life cycle performance characterization in the second part of the report when cell-aging phenomena are discussed. Due to the composite nature of the positive electrode, the features (or signature) derived from the incremental capacity (IC) of the cell appear rather complex. In this work, the method to index the observed IC peaks is discussed. Being able to index the IC signature in details is critical for analyzing and identifying degradation mechanism later in the cycle aging study.

Super Efficient Refrigerator Program (SERP) evaluation. Volume 1: Process evaluation

Energy Technology Data Exchange (ETDEWEB)

Sandahl, L.J.; Ledbetter, M.R.; Chin, R.I.; Lewis, K.S.; Norling, J.M.

1996-01-01

The Pacific Northwest National Laboratory (PNNL) conducted this study for the US Department of Energy (DOE) as part of the Super Efficient Refrigerator Program (SERP) Evaluation. This report documents the SERP formation and implementation process, and identifies preliminary program administration and implementation issues. The findings are based primarily on interviews with those familiar with the program, such as utilities, appliance manufacturers, and SERP administrators. These interviews occurred primarily between March and April 1995, when SERP was in the early stages of program implementation. A forthcoming report will estimate the preliminary impacts of SERP within the industry and marketplace. Both studies were funded by DOE at the request of SERP Inc., which sought a third-party evaluation of its program.

Aging/Systems Interaction Study, Component Residual Lifetime Evaluation and Feasibility of Relicensing. Progress report, FY 1985

International Nuclear Information System (INIS)

Close, J.A.; Jacobs, P.T.; Korth, G.E.; Mudlin, J.M.; Server, W.L.; Spaletta, H.W.

1985-10-01

This report documents the work performed on four research tasks in Fiscal Year 1985 (FY-1985) which were part of the Aging/Systems Interaction Study, Component Residual Lifetime Evaluation and Feasibility of Relicensing Project. The technical and management/institutional objectives for the project are described, followed by a description of the results of each task. The work on Task 1 involved identifying and prioritizing new research activities for the Nuclear Regulatory Commission (NRC) Nuclear Plant Aging Research (NPAR) Program. A proposed methodology and plan for aging-system interaction studies was developed in Task 2. The description of Task 3 work comprises a summary of nuclear plant life extension activities in the US, the technical basis associated with the residual life of metallic materials and a proposed plan for research on residual life assessment. Task 4 describes the initial evaluation of selected Standard Review Plan (NUREG-0800) sections to investigate the feasibility of relicensing. 14 refs., 13 figs., 20 tabs

Monometric and scintiscanning evaluation of esophageal function after endoscopic sclerosis of esophageal varices. Controlled prospective study

International Nuclear Information System (INIS)

Bastos, J.L.A.

1990-01-01

Esophageal function was studied in twenty-one patients with esophageal varices of different etiology submitted to endoscopic sclerosis for the detection of possible alterations in the functional pattern of the organ after this treatment. The endoscopic injection sclerosis (EIS) was performed electively in 14 patients (Group I) and in the presence of bleeding in 07 (Group II). The sclerotizing agent used was a solution of equal parts of ethanolamine oleate (Ethamolin R ) and 50% glucose. The injections were preferentially performed by the perivascular technique at weekly intervals. Esophageal function was studied by manometry, and esophageal transit time by scintillography. Group I patients were evaluated before and two to three months and five to nine months after EIS, and Group II patients were only evaluated six to nine months after EIS. The manometry and scintillography procedures were performed in sequence on the same day. The scintillographic examinations were performed with the patient in the supine and sitting positions. (author)

Study on process of laser cladded nuclear valve parts

International Nuclear Information System (INIS)

Zhang Chunliang

2000-01-01

The microstructure and performances of the Co-base alloy coatings that are formed by laser cladding, plasma spurt welding and arc surfacing on the nuclear valve-sealing surface have been studied and compared. The combination costs of laser cladding, plasma spurt welding and arc, surfacing have been analyzed and compared. The results showed that the laser cladding processing has the advantages of high efficiency, low energy cost, a little machining allowance, high rate of finished products and low combination cost, compared with plasma spurt welding processing and arc surfacing processing. The laser cladding technology can improve the qualities of nuclear valve parts and increase their service life. Therefore, the laser cladding processing is a new technology with developing potential

An evaluation of the hemiplegic subject based on the Bobath approach. Part II: The evaluation protocol.

Science.gov (United States)

Corriveau, H; Guarna, F; Dutil, E; Riley, E; Arsenault, A B; Drouin, G

1988-01-01

A protocol of evaluation of the hemiplegic patient based on the Bobath approach to treatment is presented. Six parameters are evaluated: sensorium, muscle tone, reflex activity, active movement, postural reactions and pain. The first and last of these are included because of their possible effects on the motor recovery process of the hemiplegic patient. The other four are directly borrowed from the Bobath modality of treatment. For each of these parameters, the procedures are given for its evaluation along with its respective rating scales. These scales are of an ordinal nature ranging from 0 to 3. It is suggested that this new evaluation protocol is fully compatible with the therapeutic modality developed by Bobath and as well is adequate to quantify patient progress in the principle aspects treated by this well used rehabilitation approach.

Economic evaluation and the Jordan Rational Drug List: an exploratory study of national-level priority setting.

Science.gov (United States)

Lafi, Rania; Robinson, Suzanne; Williams, Iestyn

2012-01-01

To explore the extent of and barriers to the use of economic evaluation in compiling the Jordan Rational Drug List in the health care system of Jordan. The research reported in this article involved a case study of the Jordan Rational Drug List. Data collection methods included semi-structured interviews with decision makers and analysis of secondary documentary sources. The case study was supplemented by additional interviews with a small number of Jordanian academics involved in the production of economic evaluation. The research found that there was no formal requirement for cost-effectiveness information submitted as part of the decision-making process for the inclusion of new technologies on the Jordan Rational Drug List. Both decision makers and academics suggested that economic evidence was not influential in formulary decisions. This is unusual for national formulary bodies. The study identified a number of barriers that prevent substantive and routine use of economic evaluation. While some of these echo findings of previous studies, others-notably the extent to which the sectional interests of clinical groups and commercial (pharmaceutical) industry exert undue influence over decision making-more obviously result from the specific Jordanian context. Economic evaluation was not found to be influential in the Jordan Rational Drug List. Recommendations for improvement include enhancing capacity in relation to generating, accessing, and/or applying health economic analysis to priority setting decisions. There is a further need to incentivize the use of economic evaluation, and this requires that organizational and structural impediments be removed. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The Role of Involvement and Use in Multisite Evaluations

Science.gov (United States)

Lawrenz, Frances; King, Jean A.; Ooms, Ann

2011-01-01

A cross-case analysis of four National Science Foundation (NSF) case studies identified both unique details and common themes related to promoting the use and influence of multisite evaluations. The analysis provided evidence of diverse evaluation use by stakeholders and suggested that people taking part in the multisite evaluations perceived…

LHC Beam Dump Design Study - Part III : Off-normal operating conditions

CERN Document Server

Bruno, L; Ross, M; Sala, P

2000-01-01

The LHC beam dump design study has been preliminarily substantiated by energy deposition simulations (Part I) and heat transfer analyses (Part II). The present report is devoted to the abnormal operating conditions induced by a malfunction of the beam diluters. A general approach to the analysis of off-normal operation is presented, which is derived from standard design norms adopted in the nuclear industry. Attention is focused mainly on the carbon core, which is longitudinally split into segments of different density in order to better distribute the deposited energy. The maximum energy density it absorbs decreases by at least 33%, compared to a uniform standard density carbon core. This structure may sustain any partial sweep failure without major damage, up to the ultimate beam intensity and energy. To minimise the risks inherent in a fully unswept beam, a sacrificial graphite mandrel will be placed on the core axis, surrounded by a thick high strength carbon-carbon composite tube. With this arrangement, ...

Modeling of atmospheric circulation at mid- and high latitudes of the northern hemisphere - evaluation studies using ARPEGE

Energy Technology Data Exchange (ETDEWEB)

Song, Yongjia

2007-03-15

In the present thesis the author evaluate experiments with the atmospheric part of BCM (Bergen climate model), named ARPEGE, performed for present day climate during the last 50 years. The objectives have been to evaluate the ability of ARPEGE to simulate the general circulation at mid- and high northern latitudes in winter. Particular emphasis is put on the dependence of systematic errors on the horizontal resolution in the model, the climatology and variability of storm tracks, the poleward energy transport and the North Atlantic winter circulation expressed by the North Atlantic Oscillation (NAO; e.g. Hurrell 1995). In addition, use of ARPEGE for downscaling purposes has been evaluated. The work on storm tracks, poleward energy transport and the variability of the NAO include pure observational studies, mainly based on reanalyses, bringing forward new knowledge on extratropical storm tracks, heat transport variations and links between Eurasian snow cover and wintertime NAO

Promoting physical activity, healthy eating and gross motor skills development among preschoolers attending childcare centers: Process evaluation of the Healthy Start-Départ Santé intervention using the RE-AIM framework.

Science.gov (United States)

Ward, Stéphanie; Chow, Amanda Froehlich; Humbert, M Louise; Bélanger, Mathieu; Muhajarine, Nazeem; Vatanparast, Hassan; Leis, Anne

2018-06-01

The Healthy Start-Départ Santé intervention was developed to promote physical activity, gross motor skills and healthy eating among preschoolers attending childcare centers. This process evaluation aimed to report the reach, effectiveness, adoption, implementation and maintenance of the Healthy Start-Départ Santé intervention. The RE-AIM framework was used to guide this process evaluation. Data were collected across 140 childcare centers who received the Healthy Start-Départ Santé intervention in the provinces of Saskatchewan and New Brunswick, Canada. Quantitative data were collected through director questionnaires at 10 months and 2 years after the initial training and analyzed using descriptive statistics. Qualitative data were collected throughout the intervention. The intervention was successful in reaching a large number of childcare centres and engaging both rural and urban communities across Saskatchewan and New Brunswick. Centres reported increasing opportunities for physical activity and healthy eating, which were generally low-cost, easy and quick to implement. However, these changes were rarely transformed into formal written policies. A total of 87% of centers reported using the physical activity resource and 68% using the nutrition resource on a weekly basis. Implementation fidelity of the initial training was high. Of those centers who received the initial training, 75% participated in the mid-point booster session training. Two year post-implementation questionnaires indicated that 47% of centers were still using the Active Play Equipment kit, while 42% were still using the physical activity resource and 37% were still using the nutrition resource. Key challenges to implementation and sustainability identified during the evaluation were consistent among all of the REAIM elements. These challenges included lack of time, lack of support from childcare staff and low parental engagement. Findings from this study suggest the implementation of

Study of laser cladding nuclear valve parts

International Nuclear Information System (INIS)

Shi Shihong; Wang Xinlin; Huang Guodong

1998-12-01

The mechanism of laser cladding is discussed by using heat transfer model of laser cladding, heat conduction model of laser cladding and convective transfer mass model of laser melt-pool. Subsequently the laser cladding speed limit and the influence of laser cladding parameters on cladding layer structure is analyzed. A 5 kW with CO 2 transverse flow is used in the research for cladding treatment of sealing surface of stop valve parts of nuclear power stations. The laser cladding layer is found to be 3.0 mm thick. The cladding surface is smooth and has no such defects as crack, gas pore, etc. A series of comparisons with plasma spurt welding and arc bead welding has been performed. The results show that there are higher grain grade and hardness, lower dilution and better performances of resistance to abrasion, wear and of anti-erosion in the laser cladding layer. The new technology of laser cladding can obviously improve the quality of nuclear valve parts. Consequently it is possible to lengthen the service life of nuclear valve and to raise the safety and reliability of the production system

Studies on the behavior of part-through circumferential crack at intrados in elbows under in-plane bending moment

International Nuclear Information System (INIS)

Srivastava, A.; Prabhakaran, K.M.; Ghosh, A.K.

2011-01-01

Highlights: → Behavior of cracked elbows with part-through crack at intrados under bending moment is studied. → Some part of crack always opens and some part gets closed irrespective of mode of applied moment. → Fraction of the crack that opens basically decides the weakening effect of the cracked elbow. → Results will be useful for fracture studies and limit load estimation especially for LBB. - Abstract: This paper presents the behavior of part-through circumferential crack at intrados in elbows under in-plane bending moment. This is based on detailed non-linear (both material and geometric) finite element analysis performed on various sizes of elbows (generally used in piping industry), having different crack sizes. It is observed that some part of the crack always opens and some part gets closed irrespective of the mode of applied bending moment (opening/closing). The fraction of the crack that opens basically decides the weakening effect of the cracked elbow. It is observed that there is a threshold value of crack length and crack depth, before which no crack opening is observed under opening mode. Also as elbow becomes thinner, the threshold value of above two parameters increases. Quite interestingly, the part of crack which closes in opening mode opens under closing mode. The above mentioned study on the behavior of crack will be useful for fracture studies and limit load estimation especially when leak before break concept is to be employed.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics

Science.gov (United States)

Hanley, G. M.

1979-01-01

Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.

Medical engineering at Cardiff University. Part 2: Postgraduate programmes of study.

Science.gov (United States)

Theobald, P; O'Doherty, D M; Holt, C A; Evans, S L; Jones, M D

2009-05-01

The Medical Engineering team within the School of Engineering, Cardiff University, delivers two postgraduate programmes of study. Established over 10 years ago, the part-time MSc programmes in Orthopaedic Engineering and Clinical Engineering offer the opportunity of further study while remaining within full-time employment. Both programmes deliver 120 taught credits over two academic years via a series of residential weekends, with successful completion enabling the student to undertake and then defend a 60-credit research dissertation. Fulfilling a specific role on the career pathway for both student cohorts, the strength of each programme is indicated by the consistent number of applicants.

A study on the measurement and evaluation of neutron flux using SPNDs during nuclear fuel irradiation test

Energy Technology Data Exchange (ETDEWEB)

Son, J. M.; Kim, B. K.; Oh, J. M.; Park, S. J.; Lee, B. H.; Seo, C. G.; Kang, Y. H. [KAERI, Taejon (Korea, Republic of)

2003-10-01

As a part of the development of instrumentation technologies for a nuclear fuel irradiation test in HANARO(High-Flux Advanced Nuclear Application Reactor), a study is performed to measure and evaluate the neutron flux at the same position as the nuclear fuel during irradiation test using the SPND(Self Powered Neutron Detector). To perform this study, rhodium type SPNDs and amplifier are selected suitable to irradiation test, and the selected SPNDs are installed in instrumented fuel capsule(02F-11K). The irradiation test using a instrumented fuel capsule are performed in the OR5 vertical hole of HANARO for about 54 days, and SPND output signals are acquired successfully during irradiation test. Acquired SPND signals are analyzed and evaluated as a reliable data by COSMOS Code, and this will be utilized for the fuel related research together with fuel center temperature and reactor operation data.

Safety evaluation of advance street name signs

Science.gov (United States)

2009-06-01

The Federal Highway Administration (FHWA) organized a pooled fund study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. The objective of the pooled fund study was to estimate the safety effectivenes...

Learning to Like Exercising: Evaluative Conditioning Changes Automatic Evaluations of Exercising and Influences Subsequent Exercising Behavior.

Science.gov (United States)

Antoniewicz, Franziska; Brand, Ralf

2016-04-01

This multistudy report used an experimental approach to alter automatic evaluations of exercise (AEE). First, we investigated the plasticity of AEE (study 1). A computerized evaluative conditioning task was developed that altered the AEE of participants in two experimental groups (acquisition of positive/negative associations involving exercising) and a control group (η2 part. = .11). Second, we examined connections between changes in AEE and subsequent exercise behavior (chosen intensity on a bike ergometer; study 2) in individuals that were placed in groups according to their baseline AEE. Group differences in exercise behavior were detected (η2 part. = .29). The effect was driven by the performance of the group with preexisting negative AEE that acquired more positive associations. This illustrates the effect of altered AEE on subsequent exercise behavior and the potential of AEE as a target for exercise intervention.

Instructional Trends from AASL Journals: 1972-2007--Part 3: From Access-Measured to Evaluation-Measured

Science.gov (United States)

Callison, Daniel

2009-01-01

This article is Part 3 of a three part summary of selected articles from the journals of the American Association of School Librarians (AASL) over a period of thirty-five years from 1972 to 2007. This three-part series in the April, May, and June (2009) issues of "School Library Media Activities Monthly" ("SLMAM") illustrate the evolution in…

Optimizing Usability Studies by Complementary Evaluation Methods

NARCIS (Netherlands)

Schmettow, Martin; Bach, Cedric; Scapin, Dominique

2014-01-01

This paper examines combinations of complementary evaluation methods as a strategy for efficient usability problem discovery. A data set from an earlier study is re-analyzed, involving three evaluation methods applied to two virtual environment applications. Results of a mixed-effects logistic

Evaluation of seismic hazard at the northwestern part of Egypt

Science.gov (United States)

Ezzelarab, M.; Shokry, M. M. F.; Mohamed, A. M. E.; Helal, A. M. A.; Mohamed, Abuoelela A.; El-Hadidy, M. S.

2016-01-01

The objective of this study is to evaluate the seismic hazard at the northwestern Egypt using the probabilistic seismic hazard assessment approach. The Probabilistic approach was carried out based on a recent data set to take into account the historic seismicity and updated instrumental seismicity. A homogenous earthquake catalogue was compiled and a proposed seismic sources model was presented. The doubly-truncated exponential model was adopted for calculations of the recurrence parameters. Ground-motion prediction equations that recently recommended by experts and developed based upon earthquake data obtained from tectonic environments similar to those in and around the studied area were weighted and used for assessment of seismic hazard in the frame of logic tree approach. Considering a grid of 0.2° × 0.2° covering the study area, seismic hazard curves for every node were calculated. Hazard maps at bedrock conditions were produced for peak ground acceleration, in addition to six spectral periods (0.1, 0.2, 0.3, 1.0, 2.0 and 3.0 s) for return periods of 72, 475 and 2475 years. The unified hazard spectra of two selected rock sites at Alexandria and Mersa Matruh Cities were provided. Finally, the hazard curves were de-aggregated to determine the sources that contribute most of hazard level of 10% probability of exceedance in 50 years for the mentioned selected sites.

Feasibility study on the use of groupware support for NASA source evaluation boards

Science.gov (United States)

Bishop, Peter C.; Yoes, Cissy

1991-01-01

Groupware is a class of computer based systems that support groups engaged in a common task (or goal) and that provide an interface to a shared environment. A potential application for groupware is the source evaluation board (SEB) process used in the procurement of government contracts. This study was undertaken to (1) identify parts of the SEB process which are candidates for groupware supports; and (2) identify tools which could be used to support the candidate process. Two processes of the SEB were identified as good candidates for groupware support: (1) document generation - a coordination and communication process required to present and document the findings of an SEB; and (2) group decision making - a highly analytical and integrative decision process requiring a clear and supportable outcome.

Application of the 137Cs determination to evaluate the erosion rates in cultivated soils in the west part of Cuba

International Nuclear Information System (INIS)

Gil Castillo, Reinaldo; Peralta Vital, Jose Luis; Carrazana Gonzalez, Jorge; Riverol Rosquet, Mario; Penna Valenti, Fermin; Cabrera Calcedo, Eduardo

2004-01-01

The paper shows the experience in the application of 137Cs technique to estimate the erosion rates in cultivated soils (Ultisol) in the west part of the country, and the validation of the technique results by comparison against the results from traditional methods (watershed segments). The proportional, the simplified balance of mass and the balance of mass models were used to calculate the erosion rates, for three segments. In the evaluated area, have been obtained erosion rates from 3.5 to 7.1 t/ha/y for the segment I, from 5.17 to 10.3 t/ha/y for the segment III and from 2.3 to 17 t/ha/y for the segment IX. The conclusions are, the 137Cs technique is reliable for the estimation of erosion rates in the evaluated soil and the mass balance model obtained the nearest values to the estimated by watershed segments

Ex post and ex ante evaluation of the long term management plan for sole and plaice in the North Sea (part 1): ex post

NARCIS (Netherlands)

Miller, D.C.M.; Poos, J.J.

2009-01-01

This report describes the first part of an ex post and ex ante evaluation of the long term management plan for sole and plaice in the North Sea as laid out in Council Regulation (EC) No 676/2007. This plan has been in place since 2007. The plan aims to ensure, in its first stage, that the stocks of

Cloud Properties Simulated by a Single-Column Model. Part II: Evaluation of Cumulus Detrainment and Ice-phase Microphysics Using a Cloud Resolving Model

Science.gov (United States)

Luo, Yali; Krueger, Steven K.; Xu, Kuan-Man

2005-01-01

This paper is the second in a series in which kilometer-scale-resolving observations from the Atmospheric Radiation Measurement program and a cloud-resolving model (CRM) are used to evaluate the single-column model (SCM) version of the National Centers for Environmental Prediction Global Forecast System model. Part I demonstrated that kilometer-scale cirrus properties simulated by the SCM significantly differ from the cloud radar observations while the CRM simulation reproduced most of the cirrus properties as revealed by the observations. The present study describes an evaluation, through a comparison with the CRM, of the SCM's representation of detrainment from deep cumulus and ice-phase microphysics in an effort to better understand the findings of Part I. It is found that detrainment occurs too infrequently at a single level at a time in the SCM, although the detrainment rate averaged over the entire simulation period is somewhat comparable to that of the CRM simulation. Relatively too much detrained ice is sublimated when first detrained. Snow falls over too deep of a layer due to the assumption that snow source and sink terms exactly balance within one time step in the SCM. These characteristics in the SCM parameterizations may explain many of the differences in the cirrus properties between the SCM and the observations (or between the SCM and the CRM). A possible improvement for the SCM consists of the inclusion of multiple cumulus cloud types as in the original Arakawa-Schubert scheme, prognostically determining the stratiform cloud fraction and snow mixing ratio. This would allow better representation of the detrainment from deep convection, better coupling of the volume of detrained air with cloud fraction, and better representation of snow field.

E-learning for Part-Time Medical Studies

Directory of Open Access Journals (Sweden)

Półjanowicz Wiesław

2016-12-01

Full Text Available Distance education undoubtedly has many advantages, such as individualization of the learning process, unified transmission of teaching materials, the opportunity to study at any place and any time, reduction of financial costs for commuting to classes or accommodation of participants, etc. Adequate working conditions on the e-learning portal must also be present, eg. well-prepared, substantive courses and good communication between the participants. Therefore, an important element in the process of conducting e-learning courses is to measure the increase of knowledge and satisfaction of participants with distance learning. It allows for fine-tuning the content of the course and for classes to be properly organized. This paper presents the results of teaching and assessment of satisfaction with e-learning courses in “Problems of multiculturalism in medicine”, “Selected issues of visual rehabilitation” and “Ophthalmology and Ophthalmic Nursing”, which were carried out experimentally at the Faculty of Health Sciences at the Medical University of Bialystok for nursing students for the 2010/2011 academic year. The study group consisted of 72 part-time students who learnt in e-learning mode and the control group of 87 students who learnt in the traditional way. The students’ opinions about the teaching process and final exam scores were analyzed based on a specially prepared survey questionnaire. Organization of e-learning classes was rated positively by 90% of students. The average result on the final exams for all distance learning subjects was at the level of 82%, while for classes taught in the traditional form it was 81%. Based on these results, we conclude that distance learning is as effective as learning according to the traditional form in medical education studies.

Characterization and complexation of humic acids. Part 1

International Nuclear Information System (INIS)

Kim, J.L.; Buckau, G.; Klenze, R.; Rhee, D.S.; Wimmer, H.

1991-01-01

This paper summarizes the research contributions to the CEC Mirage II project, particularly the research area on complexation and colloids (COCO). The first part of the paper comprises the characterization of humic and fulvic acids from different origins: a commercial product from the Aldrich Co. used as a reference humic acid and site-specific humic acids from Gorleben (Germany), Boom Clay (Belgium) and Fanay Augeres (France) aquifer systems. The second part includes the complexation of trivalent actinides: Am(III) and Cm(III) with various humic acids. A number of different methods have been applied for the complexation study: spectrophotometry, ultrafiltration, laser-induced photo-acoustic spectroscopy (LPAS) and time-resolved laser fluorescence spectroscopy (TRLFS). The evaluation process of complexation constant is discussed extensively and the well consolidated results are presented, which can be directly used for the geochemical modelling of the radionuclide migration

Coefficient of restitution of model repaired car body parts

OpenAIRE

D. Hadryś; M. Miros

2008-01-01

Purpose: The qualification of influence of model repaired car body parts on the value of coefficient of restitution and evaluation of impact energy absorption of model repaired car body parts.Design/methodology/approach: Investigation of plastic strain and coefficient of restitution of new and repaired model car body parts with using impact test machine for different impact energy.Findings: The results of investigations show that the value of coefficient of restitution changes with speed (ene...

Evaluation of remote piping connectors for fusion applications

International Nuclear Information System (INIS)

Welland, H.J.

1985-08-01

Four types of remotely actuated piping connectors were evaluated for their application to the fusion energy program. The evaluations are part of a study being performed by EG and G Idaho, Inc., for the fusion program at Kernforschungszentrum, Karlsruhe, GmbH. Results of the connector evaluation will be used to develop preliminary concepts for connector improvements and new connector configurations

Evaluating Complementary Therapies for Canine Osteoarthritis Part I: Green-Lipped Mussel (Perna canaliculus

Directory of Open Access Journals (Sweden)

Anna Hielm-Björkman

2009-01-01

Full Text Available A green-lipped mussel (GLM preparation was evaluated in a randomized, double-controlled and double-blinded clinical trial. It was hypothesized that the treatment effect would be less than that of the positive control (carprofen but more than that of the negative control (placebo. Forty-five dogs with chronic pain and a radiographic diagnosis of osteoarthritis that were randomly allocated into one of three groups completed the study. All dogs were fed the test products or placebo for 8 weeks. The dogs were evaluated four times, at 4-week intervals. Six different variables were assessed: veterinary-assessed mobility index, two force plate variables, owner-evaluated chronic pain index and pain as well as locomotion visual analogue scales (VASs. Intake of extra carprofen was also evaluated. A chi-squared and a Mann–Whitney test were used to determine significance between groups. When changed to dichotomous variables, there were more dogs in the GLM than in the placebo group that improved, according to veterinary-assessed mobility, owner-evaluated chronic pain index and pain VAS (P = 0.031, P = 0.025, P = 0.011, respectively. For the same three, the odds ratio and their confidence interval were over one. The extent of improvement was significantly different between the GLM and the control in veterinary-assessed mobility (P = 0.012 and pain VAS (P = 0.004. In conclusion, GLM alleviated chronic orthopedic pain in dogs although it was not as effective as carprofen. As no side-effects were detected, GLM may be beneficial in dogs e.g. when non-steroidal anti-inflammatory drugs cannot be used.

Outdoor work and solar radiation exposure: Evaluation method for epidemiological studies.

Science.gov (United States)

Modenese, Alberto; Bisegna, Fabio; Borra, Massimo; Grandi, Carlo; Gugliermetti, Franco; Militello, Andrea; Gobba, Fabriziomaria

The health risk related to an excessive exposure to solar radiation (SR) is well known. The Sun represents the main exposure source for all the frequency bands of optical radiation, that is the part of the electromagnetic spectrum ranging between 100 nm and 1 mm, including infrared (IR), ultraviolet (UV) and visible radiation. According to recent studies, outdoor workers have a relevant exposure to SR but few studies available in scientific literature have attempted to retrace a detailed history of individual exposure. We propose a new method for the evaluation of SR cumulative exposure both during work and leisure time, integrating subjective and objective data. The former is collected by means of an interviewer administrated questionnaire. The latter is available through the Internet databases for many geographical regions and through individual exposure measurements. The data is integrated into a mathematical algorithm, in order to obtain an esteem of the individual total amount of SR the subjects have been exposed to during their lives. The questionnaire has been tested for 58 voluntary subjects. Environmental exposure data through online databases has been collected for 3 different places in Italy in 2012. Individual exposure by electronic UV dosimeter has been measured in 6 fishermen. A mathematical algorithm integrating subjective and objective data has been elaborated. The method proposed may be used in epidemiological studies to evaluate specific correlations with biological effects of SR and to weigh the role of the personal and environmental factors that may increase or reduce SR exposure. Med Pr 2016;67(5):577-587. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

資訊檢索指導員評鑑量表之探討 A Study of Evaluation Checklist on the Performance of Information Intermediaries

Directory of Open Access Journals (Sweden)

Shih-hsion Huang

1998-09-01

Full Text Available 無The main purpose of this study is to induce important factors of a good performance of information intermediaries by developing the evaluation checklist. By employing the Delphi Method, first step is to collect Delphi panel's (people who are/were in charge of reference and information services in university libraries opinions by open questionnaire. Upon them, a constructive questionnaire is developed and sent out to experts to rank on the degree of importance of evaluation items. A final consensus among the experts is gotten in the second round of Delphi process. An evaluation checklist of information intermediaries is established based on the study result. According the result of the study, the final evaluation checklist comprised seven parts with 191 items totally. That can be a reference to related fields and following researches.

INPRO phase 1B (2nd part) joint study

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Bum; Kim, Young In; Hahn, Do Hee (and others)

2006-08-15

In this project, the Korean innovative nuclear energy system(INS) concept was assessed to be contributory to IAEA's INPRO Joint Study on CNFC-FR. The Korean INS concept was defined as an integrated system consisting of a sodium-cooled, metal fueled fast reactor KALIMER and a PWR(including CANDU)-KALIMER coupled closed nuclear fuel cycle for the Joint Study. From the results of the national scenario study performed based o the Korean INS concept, it has veen confirmed that the deployment of KALIMER from 2030 until 2100 could reduce the amount of domestic spent fuel from PWRs and CANDUs with no further increase in PWR spent fuel thereafter. And the amount of minor actinides disposed as high level would be decreased to zero with complete replacement of PWRs with KALIMERs. Based on the results of the national scenario study, a preliminary assessment of the Korean INS concept has been performed using the INPRO methodology and user's manuals. During the INS assessment, items requiring either improvement or complement have been detected in order to dedicate to INPRO's effort to improve the methodology. The INPRO methodology generally lack a consistency in a level of depth and quantity of evaluation criteria and parameters for six areas within the INPRO framework. It needs to complement application methods and guidances applicable to various technology levels as well as illustrations of assessment tools. In addition, it needs to develop quantification and aggregation of evaluated results, application of weighting factor methods, and a synthetic manual for integrated assessment procedure and methodology.

INPRO phase 1B (2nd part) joint study

International Nuclear Information System (INIS)

Lee, Yong Bum; Kim, Young In; Hahn, Do Hee

2006-08-01

In this project, the Korean innovative nuclear energy system(INS) concept was assessed to be contributory to IAEA's INPRO Joint Study on CNFC-FR. The Korean INS concept was defined as an integrated system consisting of a sodium-cooled, metal fueled fast reactor KALIMER and a PWR(including CANDU)-KALIMER coupled closed nuclear fuel cycle for the Joint Study. From the results of the national scenario study performed based o the Korean INS concept, it has veen confirmed that the deployment of KALIMER from 2030 until 2100 could reduce the amount of domestic spent fuel from PWRs and CANDUs with no further increase in PWR spent fuel thereafter. And the amount of minor actinides disposed as high level would be decreased to zero with complete replacement of PWRs with KALIMERs. Based on the results of the national scenario study, a preliminary assessment of the Korean INS concept has been performed using the INPRO methodology and user's manuals. During the INS assessment, items requiring either improvement or complement have been detected in order to dedicate to INPRO's effort to improve the methodology. The INPRO methodology generally lack a consistency in a level of depth and quantity of evaluation criteria and parameters for six areas within the INPRO framework. It needs to complement application methods and guidances applicable to various technology levels as well as illustrations of assessment tools. In addition, it needs to develop quantification and aggregation of evaluated results, application of weighting factor methods, and a synthetic manual for integrated assessment procedure and methodology

[Neurohumoral mechanisms for vasovagal syncopes. Part II].

Science.gov (United States)

Gajek, Jacek; Zyśko, Dorota

2003-04-01

Vasovagal syncope is defined as a reflex loss of consciousness related to reaction to various stimuli as orthostatic stress, pain or emotions connected with loss of muscle postural tone. In the second part of the paper the authors describe the possible role of the particular neurohumoral factors and autonomic nervous system in the development of vasovagal syncope. The studies on the involvement of neurohumoral factors in vasovagal syncope can play a key role in a more precise evaluation of affected patients, long term prophylaxis against syncopal events and may contribute to development of more reliable diagnostic tests.

Pharmacokinetic comparison of sustained- and immediate-release oral formulations of cilostazol in healthy Korean subjects: a randomized, open-label, 3-part, sequential, 2-period, crossover, single-dose, food-effect, and multiple-dose study.

Science.gov (United States)

Lee, Donghwan; Lim, Lay Ahyoung; Jang, Seong Bok; Lee, Yoon Jung; Chung, Jae Yong; Choi, Jong Rak; Kim, Kiyoon; Park, Jin Woo; Yoon, Hosang; Lee, Jaeyong; Park, Min Soo; Park, Kyungsoo

2011-12-01

A sustained-release (SR) formulation of cilostazol was recently developed in Korea and was expected to yield a lower C(max) and a similar AUC to the immediate-release (IR) formulation. The goal of the present study was to compare the pharmacokinetic profiles of a newly developed SR formulation and an IR formulation of cilostazol after single- and multiple-dose administration and to evaluate the influence of food in healthy Korean subjects. This study was developed as part of a product development project at the request of the Korean regulatory agency. This was a randomized, 3-part, sequential, open-label, 2-period crossover study. Each part consisted of different subjects between the ages of 19 and 55 years. In part 1, each subject received a single dose of SR (200 mg × 1 tablet, once daily) and IR (100 mg × 2 tablets, BID) formulations of cilostazol orally 7 days apart in a fasted state. In part 2, each subject received a single dose of the SR (200 mg × 1 tablet, once daily) formulation of cilostazol 7 days apart in a fasted and a fed state. In part 3, each subject received multiple doses of the 2 formulations for 8 consecutive days 21 days apart. Blood samples were taken for 72 hours after the dose. Cilostazol pharmacokinetics were determined for both the parent drug and its metabolites (OPC-13015 and OPC-13213). Adverse events were evaluated through interviews and physical examinations. Among the 92 enrolled subjects (66 men, 26 women; part 1, n = 26; part 2, n = 26; part 3, n = 40), 87 completed the study. In part 1, all the primary pharmacokinetic parameters satisfied the criterion for assumed bioequivalence both in cilostazol and its metabolites, yielding 90% CI ratios of 0.9624 to 1.2323, 0.8873 to 1.1208, and 0.8919 to 1.1283 for C(max) and 0.8370 to 1.0134, 0.8204 to 0.9807, and 0.8134 to 0.9699 for AUC(0-last) of cilostazol, OPC-13015, and OPC-13213, respectively. In part 2, food intake increased C(max) and AUC significantly (P food and 23 with a high

Study of extraterrestrial disposal of radioactive wastes. Part 1: Space transportation and destination considerations for extraterrestrial disposal of radioactive wastes. [feasibility of using space shuttle

Science.gov (United States)

Thompson, R. L.; Ramler, J. R.; Stevenson, S. M.

1974-01-01

A feasibility study of extraterrestrial disposal of radioactive waste is reported. This report covers the initial work done on only one part of the NASA study, that evaluates and compares possible space destinations and space transportation systems. The currently planned space shuttle was found to be more cost effective than current expendable launch vehicles by about a factor of 2. The space shuttle requires a third stage to perform the waste disposal missions. Depending on the particular mission, this third stage could be either a reusable space tug or an expendable stage such as a Centaur.

Plan selection in Medicare Part D: Evidence from administrative data

Science.gov (United States)

Heiss, Florian; Leive, Adam; McFadden, Daniel; Winter, Joachim

2014-01-01

We study the Medicare Part D prescription drug insurance program as a bellwether for designs of private, non-mandatory health insurance markets, focusing on the ability of consumers to evaluate and optimize their choices of plans. Our analysis of administrative data on medical claims in Medicare Part D suggests that fewer than 25 percent of individuals enroll in plans that are ex ante as good as the least cost plan specified by the Plan Finder tool made available to seniors by the Medicare administration, and that consumers on average have expected excess spending of about $300 per year, or about 15 percent of expected total out-of-pocket cost for drugs and Part D insurance. These numbers are hard to reconcile with decision costs alone; it appears that unless a sizeable fraction of consumers place large values on plan features other than cost, they are not optimizing effectively. PMID:24308882

Project GICC-Rhone Final report of part I

International Nuclear Information System (INIS)

2002-12-01

The project aims to give an evaluation of the impacts on the french Rhone basin, of the climatic change resulting of a double of the CO 2 content in the atmosphere (possible in 2050). This report gives an evaluation of the researches progress. It describes the topic of the part I, the hydrological simulations realized and the analysis of the hydrological impacts. It provides also recommendations for the part II. The following topics are presented: the objectives of the project; the data and the atmospheric scenari construction methods on the Rhone basin under the climatic change; the used hydrological models; the results analysis in terms of hydrogeological impacts; the limits of the approach; and a bibliography. (A.L.B.)

Simulation studies for the evaluation of health information technologies

DEFF Research Database (Denmark)

Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

2012-01-01

It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... system on the appropriateness of prescriptions and drugrelated activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences...

Analysis and evaluation of GAVE chains. Part 1 of 3. Management summary; Analyse en evaluatie van GAVE-ketens. Deel 1 van 3. Management summary

Energy Technology Data Exchange (ETDEWEB)

Van den Heuvel, E.J.M.T.

1999-12-01

This main report contains a summary of the detailed findings of the analysis, evaluation, and integration of Novem GAVE options. The details are presented in the final report (part 2) in the form of copies of overhead sheets. That report aims at the reader who is interested in the detailed findings, as well as an overview of the results. For readers who are mainly interested in the high-level results, and are comfortable with Dutch, there is this short text summary of our results. Readers who are interested in the underlying data and detailed assumptions are encouraged to consult the appendix to this report, entitled 'Analyse en evaluatie van GAVE-ketens, appendices' (part 3)

DISCRETIZATION APPROACH USING RAY-TESTING MODEL IN PARTING LINE AND PARTING SURFACE GENERATION

Institute of Scientific and Technical Information of China (English)

HAN Jianwen; JIAN Bin; YAN Guangrong; LEI Yi

2007-01-01

Surface classification, 3D parting line, parting surface generation and demoldability analysis which is helpful to select optimal parting direction and optimal parting line are involved in automatic cavity design based on the ray-testing model. A new ray-testing approach is presented to classify the part surfaces to core/cavity surfaces and undercut surfaces by automatic identifying the visibility of surfaces. A simple, direct and efficient algorithm to identify surface visibility is developed. The algorithm is robust and adapted to rather complicated geometry, so it is valuable in computer-aided mold design systems. To validate the efficiency of the approach, an experimental program is implemented. Case studies show that the approach is practical and valuable in automatic parting line and parting surface generation.

Plant-based medicines for anxiety disorders, Part 1: a review of preclinical studies.

Science.gov (United States)

Sarris, Jerome; McIntyre, Erica; Camfield, David A

2013-03-01

Research in the area of herbal psychopharmacology has revealed a variety of promising medicines that may provide benefit in the treatment of general anxiety and specific anxiety disorders. However, a comprehensive review of plant-based anxiolytics has been absent to date. This article (part 1) reviews herbal medicines for which only preclinical investigations for anxiolytic activity have been performed. In part 2, we review herbal medicines for which there have been clinical investigations for anxiolytic activity. An open-ended, language-restricted (English) search of MEDLINE (PubMed), CINAHL, Scopus and the Cochrane Library databases was conducted (up to 28 October 2012) using specific search criteria to identify herbal medicines that have been investigated for anxiolytic activity. This search of the literature revealed 1,525 papers, from which 53 herbal medicines were included in the full review (having at least one study using the whole plant extract). Of these plants, 21 had human clinical trial evidence (reviewed in part 2), with another 32 having solely preclinical studies (reviewed here in part 1). Preclinical evidence of anxiolytic activity (without human clinical trials) was found for Albizia julibrissin, Sonchus oleraceus, Uncaria rhynchophylla, Stachys lavandulifolia, Cecropia glazioui, Magnolia spp., Eschscholzia californica, Erythrina spp., Annona spp., Rubus brasiliensis, Apocynum venetum, Nauclea latifolia, Equisetum arvense, Tilia spp., Securidaca longepedunculata, Achillea millefolium, Leea indica, Juncus effusus, Coriandrum sativum, Eurycoma longifolia, Turnera diffusa, Euphorbia hirta, Justicia spp., Crocus sativus, Aloysia polystachya, Albies pindrow, Casimiroa edulis, Davilla rugosa, Gastrodia elata, Sphaerathus indicus, Zizyphus jujuba and Panax ginseng. Common mechanisms of action for the majority of botanicals reviewed primarily involve GABA, either via direct receptor binding or ionic channel or cell membrane modulation; GABA transaminase

Performance Evaluation and Analysis of Rural Drinking Water Safety Project——A Case Study in Jiangsu, China

Science.gov (United States)

Du, Xiaorong

2017-04-01

Water is the basic condition for human survival and development. As China is the most populous country, rural drinking water safety problems are most conspicuous. Therefore, the Chinese government keeps increasing investment and has built a large number of rural drinking water safety projects. Scientific evaluation of project performance is of great significance to promote the sustainable operation of the project and the sustainable development of rural economy. Previous studies mainly focus on the economic benefits of the project, while ignoring the fact that the rural drinking water safety project is quasi-public goods, which has economic, social and ecological benefits. This paper establishes a comprehensive evaluation model for rural drinking water safety performance, which adapts the rules of "5E" (economy, efficiency, effectiveness, equity and environment) as the value orientation, and selects a rural drinking water safety project as object in case study at K District, which is in the north of Jiangsu Province, China. The results shows: 1) the comprehensive performance of K project is in good condition; 2) The performance of every part shows that the scores of criteria "efficiency", "environment" and "effect" are higher than the mean performance, while the "economy" is slightly lower than the mean and the "equity" is the lowest. 3) The performance of indicator layer shows that: the planned completion rate of project, the reduction rate of project cost and the penetration rate of water-use population are significantly lower than other indicators. Based on the achievements of previous studies and the characteristics of rural drinking water safety project, this study integrates the evaluation dimensions of equity and environment, which can contribute to a more comprehensive and systematic assessment of project performance and provide empirical data for performance evaluation and management of rural drinking water safety project. Key Words: Rural drinking water

Integrating parts of the APhA Career Pathway Evaluation Program for pharmacy professionals into a career development lab.

Science.gov (United States)

Linn, Brooke A; Burton, Samantha J; Shepler, Brian M

To use parts of the APhA Career Pathway Evaluation Program for Pharmacy Professionals in a career development laboratory designed to provide students with relevant information that will help them prepare for successful careers across the profession of pharmacy. Students enrolled in the second professional year of pharmacy school participated in an interactive three-hour career development laboratory. Students completed the APhA Career Pathway Evaluation Program for Pharmacy Professionals Online Assessment Tool prior to the laboratory. In class, the students were randomized into eight groups. Two career profiles were assigned to each group for discussion during a thirty-minute brainstorming session. The groups reported their knowledge for each career profile to the entire class, and the instructors supplemented the discussion with details and more specific information about each profile. Two years of data were collected (n=300 students). One hundred and twenty four (41.3%) students responded to the voluntary post-laboratory survey questions. Overall, students rated the career pathway activities favorably with an average score of 8.13 out of 10. After participation in the discussion, 74 (59.7%) respondents indicated their career interests had been impacted. This career development laboratory is one example of how the APhA Career Pathway Evaluation Program for Pharmacy Professionals can be effectively incorporated into the PharmD curriculum in order to help students explore the various career options they might not have otherwise discovered on their own. Published by Elsevier Inc.

African Primary Care Research: Performing a programme evaluation

OpenAIRE

Dudley, Lilian

2014-01-01

Abstract This article is part of a series on Primary Care Research in the African context and focuses on programme evaluation. Different types of programme evaluation are outlined: developmental, process, outcome and impact. Eight steps to follow in designing your programme evaluation are then described in some detail: engage stakeholders; establish what is known; describe the programme; define the evaluation and select a study design; define the indicators; plan and manage data collection an...

Individual performance evaluation of the Brazilian Nuclear Energy Commission (CNEN): a meta-evaluative study

International Nuclear Information System (INIS)

Bezerra, Leonardo Ferreira

2017-01-01

The present study is a summative meta-evaluation that had as objective to evaluate the quality of the process of evaluation of individual performance of the servers of the National Commission of Nuclear Energy, being guided by the scientific curiosity to know to what extent the evaluation of performance the National Commission for Nuclear Energy meets the quality standards disseminated by the Joint Committee on Standards for Educational Evaluation. The methodology chosen to be used was based on the management approach and had as a guiding principle of the study the elaboration of a framework of criteria considering the aforementioned standards. The criteria established in the criteria framework guided the preparation of the items of the questionnaire sent to the National Commission of Nuclear Energy servers. In addition to the questionnaire, the observation of this author was considered in the context where the phenomenon occurred, which allowed a better reflective analysis of the data collected by the questionnaire. Regarding the results, it can be inferred that the performance evaluation developed at the National Commission of Nuclear Energy can be considered of quality, highlighting the servers' trust for the data, the communication process of the program stages, the credibility of the evaluators, the process of negotiation of goals and adaptability of the instrument over the course of the cycle. However, there are some opportunities for improvement, considering the relevance of evaluation as a tool to improve the performance of the autarchy's servers. Among the points that need to be improved is that there is currently a lack of knowledge about the legal basis and justification of the process of evaluation process by the servers and the lack of clarity regarding the content of the final evaluation report. Among the recommendations of this study, one can consider as the most relevant the need to: disseminate the results of this meta-evaluation to the

Evaluation of pump pulsation in respirable size-selective sampling: Part III. Investigation of European standard methods.

Science.gov (United States)

Soo, Jhy-Charm; Lee, Eun Gyung; Lee, Larry A; Kashon, Michael L; Harper, Martin

2014-10-01

Lee et al. (Evaluation of pump pulsation in respirable size-selective sampling: part I. Pulsation measurements. Ann Occup Hyg 2014a;58:60-73) introduced an approach to measure pump pulsation (PP) using a real-world sampling train, while the European Standards (EN) (EN 1232-1997 and EN 12919-1999) suggest measuring PP using a resistor in place of the sampler. The goal of this study is to characterize PP according to both EN methods and to determine the relationship of PP between the published method (Lee et al., 2014a) and the EN methods. Additional test parameters were investigated to determine whether the test conditions suggested by the EN methods were appropriate for measuring pulsations. Experiments were conducted using a factorial combination of personal sampling pumps (six medium- and two high-volumetric flow rate pumps), back pressures (six medium- and seven high-flow rate pumps), resistors (two types), tubing lengths between a pump and resistor (60 and 90 cm), and different flow rates (2 and 2.5 l min(-1) for the medium- and 4.4, 10, and 11.2 l min(-1) for the high-flow rate pumps). The selection of sampling pumps and the ranges of back pressure were based on measurements obtained in the previous study (Lee et al., 2014a). Among six medium-flow rate pumps, only the Gilian5000 and the Apex IS conformed to the 10% criterion specified in EN 1232-1997. Although the AirChek XR5000 exceeded the 10% limit, the average PP (10.9%) was close to the criterion. One high-flow rate pump, the Legacy (PP=8.1%), conformed to the 10% criterion in EN 12919-1999, while the Elite12 did not (PP=18.3%). Conducting supplemental tests with additional test parameters beyond those used in the two subject EN standards did not strengthen the characterization of PPs. For the selected test conditions, a linear regression model [PPEN=0.014+0.375×PPNIOSH (adjusted R2=0.871)] was developed to determine the PP relationship between the published method (Lee et al., 2014a) and the EN methods

Site suitability evaluation for ecotourism using GIS and AHP: A case study of Isfahan Townships, Iran

Directory of Open Access Journals (Sweden)

Omid Mobaraki

2014-07-01

Full Text Available Ecotourism, as a multibillion dollars business, is an industry with high potentials for economic competition. One of the proper solutions for developing ecotourism is better identification of different regions where there is a tourism capacity and accurate planning for performing feasibility study of those regions in terms of attracting ecotourism as well as creating infrastructures in those regions. This paper evaluates capacities and power of tourism as well as nature tourism in Isfahan Township using Geographic Information System and Analytical Hierarchy Process. The present research is applied and research method is descriptive-analytical. Meanwhile, to analyze data, Arc GIS is used. Findings indicate that regarding the map of ecotourism capacity of Isfahan townships, resulted from combining various climatologically, geological, hydrological, topological maps and access maps, the township is not homogeneous in terms of nature tourism and coastal parts of the township (regions around Zayand-e-Rood have better condition than other parts and should be considered for tourism development planning.

Two-Year Institution Part-Time Nurse Faculty Experiences During Role Transition and Identity Development: A Phenomenological Study.

Science.gov (United States)

Owens, Rhoda A

This study explored two-year institution part-time nurse faculty's perceptions of their experiences during their role transitions from nurses in clinical practice to part-time clinical instructors. Part-time nurse faculty enter academia as expert clinicians, but most have little or no training in the pedagogy of effective student learning. A phenomenological study was used to explore the faculty role transition experiences. Findings support the proposition that six participants transitioned from their expert clinician to instructor identities; however, two continue in the process. Critical to this process are relationships with individuals in their environments, past and present experiences, the incentive to learn to be better instructors, and the importance of support and training. A model emerged, Process of Role Transition and Professional Identity Formation for Part-Time Clinical Instructors at Two-Year Institutions, that is potentially useful for administrators in developing individualized orientation and professional development programs.

A study of anemia among adolescent girls in eastern part of Nepal

Directory of Open Access Journals (Sweden)

Piush Kanodia

2016-03-01

Full Text Available Background & Objectives: Anemia is a global health problem. About 40% of the world's population suffers from anemia and adolescence is one of the most vulnerable age group. Hence the objective of the study was to determine prevalence and distribution of anemia among adolescent girls in eastern part of Nepal.Materials & Methods: This cross sectional study was conducted in a Government School of Dharan over a period of one year. There were total 433 participants, whose clinical and demographic profile were recorded and analyzed. Hemoglobin estimation was done by using cyanmethaemoglobin method and anemia was defined as per WHO cut-off.Results: The overall prevalence of anemia was found to be 51.3%. Prevalence was significantly more in pre-menarche age and undernourished girls (p<0.05. However factors like diet (vegetarian/non-vegetarian, worm infestation and parental education did not have a significant impact on occurrence of anemia.Conclusion: Anemia is the major health problem among adolescent girls in eastern part Nepal with high prevalence rate and nutrition is one of the leading causative factors for anemia.JCMS Nepal. 2016;12(1:19-22.

Experimental study on RCCV of ABWR plant- part 7

International Nuclear Information System (INIS)

Saito, H.; Kikuchi, R.; Muramatsu, Y.; Hiramoto, M.; Oyamada, O.; Furukawa, H.; Ujiie, K.; Takahashi, T.; Tsurumaki, S.

1989-01-01

This study confirms the integrity of the trial-designed RCCV structure with regard to horizontal earthquake force. Load-deformation, load-strain, cracking patterns and variation in stiffness were obtained by the experiments and these data were used for evaluation of the integrity of the RCCV and reliability of several kinds of design stresses. Data to grasp the mechanical properties at higher than design load level and horizontal ultimate strength of the RCCV were also obtained

Improving Supervision of Part-Time Instructors

Science.gov (United States)

Eney, Patricia R.; Davidson, Evelyn

2012-01-01

With an increasing number of colleges and universities turning to part-time instructors to teach courses at their institutions, developmental education professionals are faced with the task of finding appropriate ways to train, serve, and evaluate these instructors. Unfortunately, there is little published information on how to accomplish these…

Maintenance of Certification Part 4 Credit and recruitment for practice-based research.

Science.gov (United States)

Gorzkowski, Julie A; Klein, Jonathan D; Harris, Donna L; Kaseeska, Kristen R; Whitmore Shaefer, Regina M; Bocian, Alison B; Davis, James B; Gotlieb, Edward M; Wasserman, Richard C

2014-10-01

Competing priorities in pediatric practice have created challenges for practice-based research. To increase recruitment success, researchers must design studies that provide added value to participants. This study evaluates recruitment of pediatricians into a study, before and after the development and addition of a quality improvement (QI) curriculum approved for American Board of Pediatrics Maintenance of Certification (MOC) Part 4 Credit as an enrollment incentive. Researchers implemented multiple outreach methods to enroll pediatric practices over 28 months. Field note review revealed that many physicians declined enrollment, stating that they prioritized MOC Part 4 projects over research studies. A QI curriculum meeting standards for MOC Part 4 Credit was developed and added to the study protocol as an enrollment incentive. Enrollment rates and characteristics of practitioners enrolled pre- and post-MOC were compared. Pre-MOC enrollment contributed 48% of practices in 22 months; post-MOC enrollment contributed 49% of practices in 6 months. An average of 3.5 practices enrolled per month pre-MOC, compared with 13.1 per month post-MOC (P recruitment success and increased enrollment of pediatricians working in underserved areas. Including QI initiatives meeting MOC Part 4 criteria in practice-based research protocols may enhance participation and aid in recruiting diverse practice and patient populations. Copyright © 2014 by the American Academy of Pediatrics.

Part I: $\\beta$-delayed fission, laser spectroscopy and shape-coexistence studies with astatine beams; Part II: Delineating the island of deformation in the light gold isotopes by means of laser spectroscopy

CERN Document Server

Andreyev, Andrei

2013-01-01

Part I: $\\beta$-delayed fission, laser spectroscopy and shape-coexistence studies with astatine beams; Part II: Delineating the island of deformation in the light gold isotopes by means of laser spectroscopy

Reproduction in the space environment: Part I. Animal reproductive studies

Science.gov (United States)

Santy, P. A.; Jennings, R. T.; Craigie, D.

1990-01-01

Mankind's exploration and colonization of the frontier of space will ultimately depend on men's and women's ability to live, work, and reproduce in the space environment. This paper reviews animal studies, from microorganisms to mammals, done in space or under space-simulated conditions, which identify some of the key areas which might interfere with human reproductive physiology and/or embryonic development. Those space environmental factors which impacted almost all species included: microgravity, artificial gravity, radiation, and closed life support systems. These factors may act independently and in combination to produce their effects. To date, there have been no studies which have looked at the entire process of reproduction in any animal species. This type of investigation will be critical in understanding and preventing the problems which will affect human reproduction. Part II will discuss these problems directly as they relate to human physiology.

12 CFR Appendix A to Part 563e - Ratings

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Ratings A Appendix A to Part 563e Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY COMMUNITY REINVESTMENT Pt. 563e, App. A Appendix A to Part 563e—Ratings (a) Ratings in general. (1) In assigning a rating, the OTS evaluates a...

12 CFR Appendix B to Part 345 - CRA Notice

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false CRA Notice B Appendix B to Part 345 Banks and... REINVESTMENT Pt. 345, App. B Appendix B to Part 345—CRA Notice (a) Notice for main offices and, if an... Community Reinvestment Act (CRA), the Federal Deposit Insurance Corporation (FDIC) evaluates our record of...

12 CFR Appendix B to Part 228 - CRA Notice

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false CRA Notice B Appendix B to Part 228 Banks and... REINVESTMENT (REGULATION BB) Pt. 228, App. B Appendix B to Part 228—CRA Notice (a) Notice for main offices and... Federal Community Reinvestment Act (CRA), the Federal Reserve Board (Board) evaluates our record of...

12 CFR Appendix B to Part 25 - CRA Notice

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false CRA Notice B Appendix B to Part 25 Banks and... DEPOSIT PRODUCTION REGULATIONS Pt. 25, App. B Appendix B to Part 25—CRA Notice (a) Notice for main offices... the Federal Community Reinvestment Act (CRA), the Comptroller of the Currency evaluates our record of...

Chemical and technological evaluation of the Phyllanthus niruri aerial parts as a function of cultivation and harvesting conditions

Directory of Open Access Journals (Sweden)

Angélica G. Couto

2013-02-01

Full Text Available Tea from Phyllanthus niruri L., Phyllanthaceae, aerial parts is commonly used by Brazilian folk medicine for its benefits on the treatment of genitourinary disorders, for what the polyphenolic compounds are mainly responsible. The yield of such compounds may be influenced by several variables related with the plant growth. The effects of planting periods and harvesting conditions are investigated in this work, including four different seasons. The cultivation was characterized by dry mass yield of aerial parts, and the effect of pruning was analyzed. Leaves, stems and their mixtures were analyzed after drying and milling. Loss on drying and water soluble extractives were used as physical parameters for quality control. Flavonoid content and gallic acid were chosen as chemical markers for this work. The spectrophotometric trial based on the aluminum chloride complexes was applied to evaluate the total flavonoids content. Gallic acid contents were measured from the water extractive solutions by high-performance liquid chromatography. The pruning caused a positive influence on the amount of leaves and stems. The highest flavonoids and gallic acid contents were found in the leaves, which were developed over the summer and the winter, respectively, both from the second harvesting (after pruning. Chomatographic profile by HPLC was characterizes by the presence of gallic acid and two other major peaks (not identified substances, which relation was peculiar to each aerial part. In conclusion, these results suggest that even under less favorable climatic conditions, in winter, the pruning seems to cause a strong influence over the P. niruri polyphenolics production. Indeed, the total flavonoids content, as well as the HPLC profile, can be used as indicative parameters of the ratio of leaves and stem in the vegetal raw material.

Practicums as part of study programmes in library and information studies

Directory of Open Access Journals (Sweden)

Primož Južnič

2016-11-01

Full Text Available In Library and Information Science (LIS courses, practicums serve as a specific bond between theory on the one hand and practical work and the profession on the other. In seeking to prepare graduates for the profession and for professional work, LIS programmes use practicums as a model to enhance the library school curriculum. During the traditional LIS practicum, one already makes use of the many advantages online tools provide, building online portfolios or keeping student work diaries online while undertaking the practical part of one’s practicum. This enables easy and constant communication among all three stakeholders: host institutions, educational institutions, and students. Whilst it is important to engage actively with industry to provide students with opportunities to participate in ‘experiential learning’ and in building practical skills and knowledge, it is also important to ensure this is done in a systematic manner, and with a genuine desire on the part of the employers for a collaborative partnership. Striking similarities regarding practicums and placements between geographically distant countries such as Australia and Slovenia, and the opinions and attitudes that all three stakeholders – students, host institutions and educational institutions – share, indicates that traditional practicums, undertaken in a physical workplace, are still a key component of an LIS education.In Library and Information Science (LIS courses, practicums serve as a specific bond between theory onthe one hand and practical work and the profession on the other. In seeking to prepare graduates for theprofession and for professional work, LIS programmes use practicums as a model to enhance the libraryschool curriculum. During the traditional LIS practicum, one already makes use of the many advantagesonline tools provide, building online portfolios or keeping student work diaries online while undertakingthe practical part of one’s practicum. This

Nordic study on reactor waste. Technical part 3

International Nuclear Information System (INIS)

1981-08-01

The ground disposal alternatives examined in the Nordic study are based on establishment of relevant product specifications which can be adapted to the safety analysis of the entire waste handling sequence. Such product specifications would in turn influence the choice of incorporation techniques and may enable an optimization of the process. In order to interprete the small-scale laboratory tests with respect to long-term performance of full-scale products there were accomplished: - qualitative evaluations of the relevance of product properties for normal and abnormal events during storage, transport and disposal; - attempts to quantify the relevance of different properties, i.e. their influence on radiation doses from different stages of well specified waste management system; - assessments of available laboratory tests and of correlations between results from such tests and the long-term performance of full-scale technical products; - studies of reaction mechanisms and parameters that can affect the long-term performance of disposed products; - laboratory incorporation experiments to study impacts of process variables on the fixation of ion exchange wastes in cement and bitumen; - full-scale tests to study product performance under simulated accident conditions. (EG)

Descriptive statistics: the specification of statistical measures and their presentation in tables and graphs. Part 7 of a series on evaluation of scientific publications.

Science.gov (United States)

Spriestersbach, Albert; Röhrig, Bernd; du Prel, Jean-Baptist; Gerhold-Ay, Aslihan; Blettner, Maria

2009-09-01

Descriptive statistics are an essential part of biometric analysis and a prerequisite for the understanding of further statistical evaluations, including the drawing of inferences. When data are well presented, it is usually obvious whether the author has collected and evaluated them correctly and in keeping with accepted practice in the field. Statistical variables in medicine may be of either the metric (continuous, quantitative) or categorical (nominal, ordinal) type. Easily understandable examples are given. Basic techniques for the statistical description of collected data are presented and illustrated with examples. The goal of a scientific study must always be clearly defined. The definition of the target value or clinical endpoint determines the level of measurement of the variables in question. Nearly all variables, whatever their level of measurement, can be usefully presented graphically and numerically. The level of measurement determines what types of diagrams and statistical values are appropriate. There are also different ways of presenting combinations of two independent variables graphically and numerically. The description of collected data is indispensable. If the data are of good quality, valid and important conclusions can already be drawn when they are properly described. Furthermore, data description provides a basis for inferential statistics.

Evaluation of uncertainties in benefit-cost studies of electrical power plants. II. Development and application of a procedure for quantifying environmental uncertainties of a nuclear power plant. Final report

International Nuclear Information System (INIS)

Sullivan, W.G.

1977-07-01

Steam-electric generation plants are evaluated on a benefit-cost basis. Non-economic factors in the development and application of a procedure for quantifying environmental uncertainties of a nuclear power plant are discussed. By comparing monetary costs of a particular power plant assessed in Part 1 with non-monetary values arrived at in Part 2 and using an evaluation procedure developed in this study, a proposed power plant can be selected as a preferred alternative. This procedure enables policymakers to identify the incremental advantages and disadvantages of different power plants in view of their geographic locations. The report presents the evaluation procedure on a task by task basis and shows how it can be applied to a particular power plant. Because of the lack of objective data, it draws heavily on subjectively-derived inputs of individuals who are knowledgeable about the plant being investigated. An abbreviated study at another power plant demonstrated the transferability of the general evaluation procedure. Included in the appendices are techniques for developing scoring functions and a user's manual for the Fortran IV Program

EARLY AFFECT-CONFUSION: THE BORDERLINE BETWEEN DESPAIR AND RAGE - PART 1 OF A CASE STUDY TRILOGY

Directory of Open Access Journals (Sweden)

Richard G. Erskine

2012-12-01

Full Text Available This three part case study illustrates the principles, theoretical concepts, and relational methods of Integrative Psychotherapy in the treatment of a client who continually experienced early affect-confusion and lived on a “borderline” between intense neediness and rage, despair and self-reliance, impulsivity and manipulation. Part 1 describes the behavioral dynamics of a 38 year old female client who required a two-part treatment approach that emphasized an inter-subjective relationship, consistency, and respect while helping her to acknowledge and value her relational-needs and to engage in a relationally contactful form of anger.

In situ radionuclide migration studies in a shallow sand aquifer. Part. 1. Part. 2: appendices

International Nuclear Information System (INIS)

Williams, G.M.; Alexander, L.S.; Hitchman, S.P.; Hooker, P.J.; Noy, D.J.; Ross, C.A.M.; Stuart, A.; West, J.M.

1986-01-01

As a result of a study of the geology of the British Nuclear Fuels premises at Drigg, Cumbria, the British Geological Survey identified a shallow glacial sand deposit approximately 1.5m thick, interbedded between two clay horizons. An array of boreholes has been constructed in this sand in order to study the migration of radionuclides introduced into the formation under controlled conditions of groundwater flow. Conservative tracers used in the field test include chloride (as NaCl) and iodine-131 (as NaI). Strontium-85 (as the chloride) has been used as a chemically reactive tracer in conjunction with 131 I. The principal research objectives of the programme are as follows: (1) To undertake laboratory batch sorption experiments using core material from the field site in order to choose those nuclides of radiological interest that would migrate sufficiently quickly for their behaviour to be studied in a field experiment within a reasonable time period. (2) To identify and quantify the mechanisms for nuclide/sediment interaction by determination of the geochemical distribution of 85 Sr in contaminated cores using a sequential leaching procedure. (3) To obtain appropriate data on the hydraulic characteristics of the sand formation in order to construct a mathematical model to describe groundwater flow and reactive mass transport. Part 2 of this report contains the following appendices: (1) Calculation of sorption parameters. (2) A low-cost manifold system for use with multi-level samplers. (3) Radioactivity curves for 131 I and 85 Sr. (4) Results of particle size analysis for sand aquifers

Abbreviated machining schedule for fabricating beryllium parts free of surface damage

International Nuclear Information System (INIS)

Beitscher, S.; Capes, J.F.; Leslie, W.W.; Luckow, J.R.; Riegel, R.L.

1979-01-01

This study was performed to develop a more economical method of machining damage-free beryllium components at Rocky Flats. The present method involves a 9-pass schedule of lathe turning followed by a chemical etch. Prototype beryllium hemispherical shell parts and cylindrical tensile specimens machined to simulate the parts were utilized in this study. The main investigative methods used to evaluate the amount of machining damage were metallography and tensile tests. It was found that damage-free parts could be produced by carefully controlled machining if the number of machining passes was reduced to 4 or even 3, if followed by the standard etching treatment. These findings were made on Select S-65 grade beryllium, and probably apply to other common grades of powder source beryllium but not necessarily to ingot-source beryllium. It is recommended that the 4-pass schedule becomes the standard method to produce damage-free beryllium derived from powder. Significant savings in time, labor, and equipment can be realized by this change in method without decreasing the quality of the product

Multi-year application of WRF-CAM5 over East Asia-Part I: Comprehensive evaluation and formation regimes of O 3 and PM 2.5

Energy Technology Data Exchange (ETDEWEB)

He, Jian; Zhang, Yang; Wang, Kai; Chen, Ying; Leung, L. Ruby; Fan, Jiwen; Li, Meng; Zheng, Bo; Zhang, Qiang; Duan, Fengkui; He, Kebin

2017-09-01

Accurate simulations of air quality and climate require robust model parameterizations on regional and global scales. The Weather Research and Forecasting model with Chemistry version 3.4.1 has been coupled with physics packages from the Community Atmosphere Model version 5 (CAM5) (WRF-CAM5) to assess the robustness of the CAM5 physics package for regional modeling at higher grid resolutions than typical grid resolutions used in global modeling. In this two-part study, Part I describes the application and evaluation of WRF-CAM5 over East Asia at a horizontal resolution of 36-km for six years: 2001, 2005, 2006, 2008, 2010, and 2011. The simulations are evaluated comprehensively with a variety of datasets from surface networks, satellites, and aircraft. The results show that meteorology is relatively well simulated by WRF-CAM5. However, cloud variables are largely or moderately underpredicted, indicating uncertainties in the model treatments of dynamics, thermodynamics, and microphysics of clouds/ices as well as aerosol-cloud interactions. For chemical predictions, the tropospheric column abundances of CO, NO2, and O3 are well simulated, but those of SO2 and HCHO are moderately overpredicted, and the column HCHO/NO2 indicator is underpredicted. Large biases exist in the surface concentrations of CO, NO2, and PM10 due to uncertainties in the emissions as well as vertical mixing. The underpredictions of NO lead to insufficient O3 titration, thus O3 overpredictions. The model can generally reproduce the observed O3 and PM indicators. These indicators suggest to control NOx emissions throughout the year, and VOCs emissions in summer in big cities and in winter over North China Plain, North/South Korea, and Japan to reduce surface O3, and to control SO2, NH3, and NOx throughout the year to reduce inorganic surface PM.

Promoting Digital Change in Higher Education: Evaluating the Curriculum Digitalisation

Science.gov (United States)

Coskun, Yelkin Diker

2015-01-01

Technology, which forms part of all educational settings and curricula, is becoming an integral part of higher education too. Therefore, observations and interpretations from inside such settings are needed for a more realistic understanding. This study evaluates the information packages of the undergraduate programs of a university within the…

Are part timers real GPs? Attitudes of general practitioners toward those who work part time.

Science.gov (United States)

Mazza, D; Northfield, S

2000-09-01

Current attitudes within the medical profession suggest that one cannot be a 'real' doctor unless one works full time. The aim of this study was to determine the views and attitudes of a sample of GPs toward part time practice. As part of a larger study, GPs in two divisions in metropolitan Melbourne were sent a questionnaire based survey. GPs were asked to rate statements about part time practice using a Likert scale. The response rate was 55% (n = 246). The majority of GPs disagreed with the statement 'part time GPs are not real GPs' but feelings were mixed about whether part timers covered the same range of clinical content as full timers. One fifth of respondents questioned the competence of part time GPs. Male GPs, those over 55 years and full timers were more likely to hold negative views toward part time general practice. Our results show a 'generational' pattern toward part time practice. With the increasing numbers of women entering general practice, these attitudes will need to change to accommodate the fact that more GPs will be choosing to work part time in the future.

[The influence of intellectual capital in performance evaluation: a case-study in the hospital sector].

Science.gov (United States)

Bonacim, Carlos Alberto Grespan; Araújo, Adriana Maria Procópio de

2010-06-01

This paper contributes to public institutions with the adaptation of a performance evaluation tool based on private companies. The objective is to demonstrate how the impact of an educational activity might be measured in the economic value added for the society of a public university hospital. The paper was divided in four parts, despite the introductory and methodological aspects and the final remarks. First, the hospital sector is explained, specifically in the context of the public university hospitals. Then, the definitions, the nature and measure of the intellectual capital are presented, followed by the disclosure of the main economic performance evaluation models. Finally, an adapted model is presented, under the approach of the value based management, considering adjustments of the return and the respective investment measures, showing the impacts of the intellectual capital management and the education activity on the economic result of those institutions. The study was developed based on a methodology supported by a bibliographical research, using a comparative method procedure in the descriptive modality. At last, it is highlighted the importance of accountability for the society regarding the use of public resources and how this study can help in this way.

Continuous integrity evaluation of corroded pipelines using complemented FEA results – Part II: Procedure application

International Nuclear Information System (INIS)

Varga, László; Fekete, Gábor

2017-01-01

The general objective of this paper is to execute the continuous integrity evaluation of corroded pipelines with the developed procedure has been presented in the Part I. This aim was performed with a large dataset of complemented finite element analysis (FEA) results and burst test values can be found in the References. The numerical investigations have been done with an assumed sample-case taking spherical and spheroid shaped characteristic and mobile defects into account. The most important achievements are the supplemented ductile failure analysis, the continuous suitability of the weak link, the strain-based design criteria and the continuous integrity assessment diagrams. - Highlights: • Finite Element Analysis (FEA) examinations are performed for selection of a sample-case to investigate corrosion defects. • Serial calculations are carried out to determine the continuous suitability of the corroded pipeline sections. • We investigate the shape and size effects of corrosion defects on load carrying capacities (LCCs) of defective pipelines. • Continuous integrity assessment diagram (CIAD) showing the decreasing competent LCCs in the operation time is introduced. • Verification of the proposed method is performed by comparing the FEA results with burst pressure values measured.

42 CFR 456.243 - Content of medical care evaluation studies.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Content of medical care evaluation studies. 456.243 Section 456.243 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Ur Plan: Medical Care Evaluation Studies § 456.243 Content of medical care evaluation studies. Each...

42 CFR 456.143 - Content of medical care evaluation studies.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Content of medical care evaluation studies. 456.143 Section 456.143 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN...: Medical Care Evaluation Studies § 456.143 Content of medical care evaluation studies. Each medical care...

Evaluation influence of machining parameters on shape form errors in turning of machine parts clamped in the chuck with adaptive jaws

Directory of Open Access Journals (Sweden)

I.V. Lutsiv

2017-12-01

Full Text Available The paper deals with the derivation problem of the dependence of machine part geometric form deviation in cross section area on clamping diameter as well as cutting speed, feed and cutting depth in semi finish machining. The analysis of single factor circular deviation dependences on machining conditions values is performed. Using the special software application package the laboratory conditions experiment results are analyzed. The dispersion analysis including options for main linear and quadratic effects evaluation is given and the simplification model of experiment results is obtained. It presents the evaluation empiric dependence of cutting conditions and clamping diameter influence on shape error forming (dynamic error. It is found that to obtain the necessary form accuracy in machining with lathe chuck equipped with the adaptive clamping jaws it is desirable to control the most statistically significant factors that actually are the cutting depth and feed.

Manajeman Mahasiswa Part-Time: Best Practice Perpustakaan UIN Sunan Kalijaga Yogyakarta

Directory of Open Access Journals (Sweden)

Ida Nor'aini Hadna

2016-07-01

Abstract; The aim of this paper is to explain the part-time student management that has been done by UIN Sunan Kalijaga Library. It needs to be submitted because many college libraries in Indonesia haven’t empower their students to participate together to manage the library through part-time student activities. In this paper that based on best practice will be explained various things in part-time student management, from (1 program planning; (2 program implementation; (3 program implementation result; (4 monitoring and evaluation system; (5 program implementation impact; until (6 change as a result of the implementation of the program. Based on this research, noted that part-time students routine program activities in UIN Sunan Kalijaga Library is not only useful for UIN Sunan Kalijaga Library to facilitate the service activity, but this program is useful for the students themselves, which in addition will make them proud, also make them appreciate the time, manage their time for study and work. Moreover, for them who have been working after graduation, the experience during being a part-time student also becomes a valuable asset in working.

Study on groundwater flow system in a sedimentary rock area (part 2). Case study for the Yoro river basin, Chiba prefecture

International Nuclear Information System (INIS)

Sakai, Ryutaro; Munakata, Masahiro; Kimura, Hideo

2008-01-01

In the safety assessment for a geological disposal of long-lived radioactive waste such as high-level radioactive waste and TRU waste etc, it is important to estimate radionuclide migration to human environment through groundwater flow system. Japan Atomic Energy Agency (JAEA) has investigated a sedimentary rock area in the Yoro river basin, in Chiba Prefecture. The hydrological and geo-chemical approach is necessary for revealing the conditions of the groundwater flow system. For the purpose of establishing a methodology for these approach, investigations of flow rates and chemical compositions, isotopic ratios of hydrogen and oxygen for water samples collected from wells, rivers and springs were carried out in the 3 feeder streams as Urajiro, Imohara and Umegase river locating at the central part of the Yoro river basin. As a result, flow rates and chemical composition data suggested that considerable amount of ground water cultivated at the high permeable sand dominant layer (Daifuku Mt.) preferentially flows toward its strike direction discharging at the downstream region of Imohara and the Umegase river. The rest of the ground water was inferred to form different flowpath toward the dipping direction of bedrock more than 100m at depth and to upwell to the Urajiro River through the low permeable mud layer. Chemical composition and isotopic data indicated that most of the ground water in meteoric water origin is NaCa-HCO 3 type as represented by surface water or the evolved Ca-HCO 3 type water but the part of the upwelling water at the downstream region of Urajiro river is Na-HCO 3 type water with long residence time. This study shows that both hydrological and geo-chemical approach could be available to evaluate the relationships between shallow water and deep-seated groundwater, so it is necessary to apply this approach to regional ground water flow systems. (author)

Subsite Awareness in Neuropathology Evaluation of National Toxicology Program (NTP) Studies: A Review of Select Neuroanatomical Structures with their Functional Significance in Rodents

Science.gov (United States)

Rao, Deepa B.; Little, Peter B.; Sills, Robert

2013-01-01

This review manuscript is designed to serve as an introductory guide in neuroanatomy for toxicologic pathologists evaluating general toxicity studies. The manuscript provides an overview of approximately 50 neuroanatomical subsites and their functional significance across seven coronal sections of the brain. Also reviewed are three sections of the spinal cord, cranial and peripheral nerves (trigeminal and sciatic respectively), and intestinal autonomic ganglia. The review is limited to the evaluation of hematoxylin and eosin (H&E) stained tissue sections, as light microscopic evaluation of these sections is an integral part of the first-tier toxicity screening of environmental chemicals, drugs, and other agents. Prominent neuroanatomical sites associated with major neurological disorders are noted. This guide, when used in conjunction with detailed neuroanatomic atlases may aid in an understanding of the significance of functional neuroanatomy, thereby improving the characterization of neurotoxicity in general toxicity and safety evaluation studies. PMID:24135464

International Uranium Resources Evaluation Project (IUREP) national favourability studies: Bolivia

International Nuclear Information System (INIS)

1977-08-01

Bolivia has an area of 1,098,580 square kilometers. Its capital is La Paz. The western part of the country is dominated by two ranges of the Andes Mountains, the Cordillera Occidental on the vest flank of the high plateau (Altiplano) and the Cordillera Real (or Oriental) on the east flank. The northern Andes average 5,486 meters in elevation; the southern Andes are not as lofty. The Altiplano is 3,658 to A,267 meters high and 129 km. in average width; it is the largest basin of inland drainage in South America and contains the renowned Lake Titicaca on the Peruvian-Bolivian border. The eastern tropical lowlands or pampas (Oriente) comprise about two-thirds of the country, with rain forest in the northern portion. An intermediate zone of valleys and basins lies between the eastern Andes and Oriente. Bolivia differs from other Andean countries, like Chile, Peru and Ecuador, in having large areas of Preeambrian schists, gneisses, migmatites and granites. These crop out in the eastern part of the country. Parts of these rocks contain banded iron formations (i.e., in the Muttin region) and are probably early Precambrian in age. Little systematic exploration for uranium was undertaken in Bolivia until the late 1960's. In 1967, 1968 and 1969 technical assistance was requested from, and provided by, the IAEA. This work led to evaluation of radioactive anomalies in veins of northeast Bolivia and in sandstones in the extreme southern part of the country. Although no uranium reserves are now credited to Bolivia, the geologic possibilities for several kinds of uranium deposits coupled with the relatively limited work done to date suggest that uranium orebodies will be discovered. It is estimated that the potential resources of Bolivia are in the range of 10,000 to 100,000 tonnes uranium

Systematic literature reviews and meta-analyses: part 6 of a series on evaluation of scientific publications.

Science.gov (United States)

Ressing, Meike; Blettner, Maria; Klug, Stefanie J

2009-07-01

Because of the rising number of scientific publications, it is important to have a means of jointly summarizing and assessing different studies on a single topic. Systematic literature reviews, meta-analyses of published data, and meta-analyses of individual data (pooled reanalyses) are now being published with increasing frequency. We here describe the essential features of these methods and discuss their strengths and weaknesses. This article is based on a selective literature search. The different types of review and meta-analysis are described, the methods used in each are outlined so that they can be evaluated, and a checklist is given for the assessment of reviews and meta-analyses of scientific articles. Systematic literature reviews provide an overview of the state of research on a given topic and enable an assessment of the quality of individual studies. They also allow the results of different studies to be evaluated together when these are inconsistent. Meta-analyses additionally allow calculation of pooled estimates of an effect. The different types of review and meta-analysis are discussed with examples from the literature on one particular topic. Systematic literature reviews and meta-analyses enable the research findings and treatment effects obtained in different individual studies to be summed up and evaluated.

Dissociative Part-Dependent Resting-State Activity in Dissociative Identity Disorder: A Controlled fMRI Perfusion Study

OpenAIRE

Schlumpf, Yolanda R.; Reinders, Antje A. T. S.; Nijenhuis, Ellert R. S.; Luechinger, Roger; van Osch, Matthias J. P.; Jäncke, Lutz

2014-01-01

Background: In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part'' (EP) and the "Apparently Normal Part'' (ANP), have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors. Methods: Arterial ...

Portable Diagnostics Technology Assessment for Space Missions. Part 2; Market Survey

Science.gov (United States)

Nelson, Emily S.; Chait, Arnon

2010-01-01

A mission to Mars of several years duration requires more demanding standards for all onboard instruments than a 6-month mission to the Moon or the International Space Station. In Part 1, we evaluated generic technologies and suitability to NASA needs. This prior work considered crew safety, device maturity and flightworthiness, resource consumption, and medical value. In Part 2, we continue the study by assessing the current marketplace for reliable Point-of-Care diagnostics. The ultimate goal of this project is to provide a set of objective analytical tools to suggest efficient strategies for reaching specific medical targets for any given space mission as program needs, technological development, and scientific understanding evolve.

Development and evaluation of a threshing machine for Prosopis ...

African Journals Online (AJOL)

A decorticating machine for Prosopis Africana was developed, tested and evaluated. Prosopis Africana is popular in the Sub-Saharan Africa, with all the parts of the tree useful for medicinal purposes. This study focuses on the threshing of the pod to obtain the seed, which is the most widely used of the parts of the Prosopis ...

Autonomic Nervous System Responses to Hearing-Related Demand and Evaluative Threat.

Science.gov (United States)

Mackersie, Carol L; Kearney, Lucia

2017-10-12

This paper consists of 2 parts. The purpose of Part 1 was to review the potential influence of internal (person-related) factors on listening effort. The purpose of Part 2 was to present, in support of Part 1, preliminary data illustrating the interactive effects of an external factor (task demand) and an internal factor (evaluative threat) on autonomic nervous system measures. For Part 1, we provided a brief narrative review of motivation and stress as modulators of listening effort. For Part 2, we described preliminary data from a study using a repeated-measures (2 × 2) design involving manipulations of task demand (high, low) and evaluative threat (high, low). The low-demand task consisted of repetition of sentences from a narrative. The high-demand task consisted of answering questions about the narrative, requiring both comprehension and recall. During the high evaluative threat condition, participants were filmed and told that their video recordings would be evaluated by a panel of experts. During the low evaluative threat condition, no filming occurred; participants were instructed to "do your best." Skin conductance (sympathetic nervous system activity) and heart rate variability (HRV, parasympathetic activity) were measured during the listening tasks. The HRV measure was the root mean square of successive differences of adjacent interbeat intervals. Twelve adults with hearing loss participated. Skin conductance increased and HRV decreased relative to baseline (no task) for all listening conditions. Skin conductance increased significantly with an increase in evaluative threat, but only for the more demanding task. There was no significant change in HRV in response to increasing evaluative threat or task demand. Listening effort may be influenced by factors other than task difficulty, as reviewed in Part 1. This idea is supported by the preliminary data indicating that the sympathetic nervous system response to task demand is modulated by social evaluative

An integrated approach to sensor FDI and signal reconstruction in HTGRs – Part I: Theoretical framework

International Nuclear Information System (INIS)

Uren, Kenneth R.; Schoor, George van; Rand, Carel P. du; Botha, Anrika

2016-01-01

Highlights: • An integrated sensor fault detection and isolation method for nuclear power plants. • Utilise techniques such as non-temporal parity space and principal component analysis. • Utilise statistical methods and fuzzy systems for sensor fault isolation. • Allow the detection of multiple sensor faults. • Proposed methodology suitable for online implementation. - Abstract: Sensor fault detection and isolation (FDI) is an important element in modern nuclear power plant (NPP) diagnostic systems. In this respect, sensor FDI of generation II and III water-cooled nuclear energy systems has become an active research topic to continually improve levels of reliability, safety, and operation. However, evolutionary advances in reactor and component technology together with different energy conversion methodologies support the investigation of alternative approaches to sensor FDI. Within this context, the basic aim of this two part series is to propose, implement and evaluate an integrated approach for sensor FDI and signal reconstruction in generation IV nuclear high temperature gas-cooled reactors (HTGRs). In part I of this two part series, the methodology and theoretical background of the integrated sensor FDI and signal reconstruction approach are given. This approach combines techniques such as non-temporal parity space analysis (PSA), principal component analysis (PCA), sensor fusion and fuzzy decision systems to form a more powerful sensor FDI methodology that exploits the strengths of the individual techniques. An illustrative example of the PCA algorithm is given making use of actual data retrieved from a pilot plant called the pebble bed micro model (PBMM). This is a prototype gas turbine power plant based on the first design configuration of the pebble bed modular reactor (PBMR). In part II, the described integrated sensor fault detection approach will be evaluated by means of two case studies. In the first case study the approach will be evaluated

A Study on the Evaluation of Field Application of High-Fluidity Concrete Containing High Volume Fly Ash

Directory of Open Access Journals (Sweden)

Yun-Wang Choi

2015-01-01

Full Text Available In the recent concrete industry, high-fluidity concrete is being widely used for the pouring of dense reinforced concrete. Normally, in the case of high-fluidity concrete, it includes high binder contents, so it is necessary to replace part of the cement through admixtures such as fly ash to procure economic feasibility and durability. This study shows the mechanical properties and field applicability of high-fluidity concrete using mass of fly ash as alternative materials of cement. The high-fluidity concrete mixed with 50% fly ash was measured to manufacture concrete that applies low water/binder ratio to measure the mechanical characteristics as compressive strength and elastic modulus. Also, in order to evaluate the field applicability, high-fluidity concrete containing high volume fly ash was evaluated for fluidity, compressive strength, heat of hydration, and drying shrinkage of concrete.

The object of the assessment – part of the teachers’ evaluation

Directory of Open Access Journals (Sweden)

Robert Gabriel DRAGOMIR

2010-06-01

Full Text Available The present paper is part of an ample research on a teacher assessment model in the pre university education system. The purpose was to establish the theoretical aspects of the assessment object taken into consideration. Thus, I have presented and described the assessment object, which involves the teacher’s performance, the content and the result of the teacher’s activity, which is materialized in the pupil’s knowledge.

Content validity--establishing and reporting the evidence in newly developed patient-reported outcomes (PRO) instruments for medical product evaluation: ISPOR PRO good research practices task force report: part 1--eliciting concepts for a new PRO instrument.

Science.gov (United States)

Patrick, Donald L; Burke, Laurie B; Gwaltney, Chad J; Leidy, Nancy Kline; Martin, Mona L; Molsen, Elizabeth; Ring, Lena

2011-12-01

The importance of content validity in developing patient reported outcomes (PRO) instruments is stressed by both the US Food and Drug Administration and the European Medicines Agency. Content validity is the extent to which an instrument measures the important aspects of concepts that developers or users purport it to assess. A PRO instrument measures the concepts most significant and relevant to a patient's condition and its treatment. For PRO instruments, items and domains as reflected in the scores of an instrument should be important to the target population and comprehensive with respect to patient concerns. Documentation of target population input in item generation, as well as evaluation of patient understanding through cognitive interviewing, can provide the evidence for content validity. Developing content for, and assessing respondent understanding of, newly developed PRO instruments for medical product evaluation will be discussed in this two-part ISPOR PRO Good Research Practices Task Force Report. Topics include the methods for generating items, documenting item development, coding of qualitative data from item generation, cognitive interviewing, and tracking item development through the various stages of research and preparing this tracking for submission to regulatory agencies. Part 1 covers elicitation of key concepts using qualitative focus groups and/or interviews to inform content and structure of a new PRO instrument. Part 2 covers the instrument development process, the assessment of patient understanding of the draft instrument using cognitive interviews and steps for instrument revision. The two parts are meant to be read together. They are intended to offer suggestions for good practices in planning, executing, and documenting qualitative studies that are used to support the content validity of PRO instruments to be used in medical product evaluation. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR

Evaluation of accountability measurements

International Nuclear Information System (INIS)

Cacic, C.G.

1988-01-01

The New Brunswick Laboratory (NBL) is programmatically responsible to the U.S. Department of Energy (DOE) Office of Safeguards and Security (OSS) for providing independent review and evaluation of accountability measurement technology in DOE nuclear facilities. This function is addressed in part through the NBL Safegaurds Measurement Evaluation (SME) Program. The SME Program utilizes both on-site review of measurement methods along with material-specific measurement evaluation studies to provide information concerning the adequacy of subject accountability measurements. This paper reviews SME Program activities for the 1986-87 time period, with emphasis on noted improvements in measurement capabilities. Continued evolution of the SME Program to respond to changing safeguards concerns is discussed

The amount of natural radionuclides in the individual parts of environment in the locality Jahodna

International Nuclear Information System (INIS)

Cipakova, A.; Vrabel, V.

2008-01-01

In this study we have investigated and evaluated the amount of K-40, Ra-226, Th-232, U-238 as well as total alpha and beta activity in individual parts of environment, i.e. soil, plant, water and sediment. The locality Jahodna was a studied one. This is a perspective source of uranium ore in the Slovak Republic. (authors)

[Study on Different Parts of Wild and Cultivated Gentiana Rigescens with Fourier Transform Infrared Spectroscopy].

Science.gov (United States)

Shen, Yun-xia; Zhao, Yan-li; Zhang, Ji; Zuo, Zhi-tian; Wang, Yuan-zhong; Zhang, Qing-zhi

2016-03-01

The application of traditional Chinese medicine (TCM) and their preparations have a long history. With the deepening of the research, the market demand is increasing. However, wild resources are so limited that it can not meet the needs of the market. The development of wild and cultivated samples and research on accumulation dynamics of chemical component are of great significance. In order to compare composition difference of different parts (root, stem, and leaf) of wild and cultivated G. rigescens, Fourier infrared spectroscopy (FTIR) and second derivative spectra were used to analyze and evaluate. The second derivative spectra of 60 samples and the rate of affinity (the match values) were measured automatically using the appropriate software (Omnic 8.0). The results showed that the various parts of wild and cultivated G. rigescens. were high similar the peaks at 1732, 1 643, 1 613, 1 510, 1 417, 1 366, 1 322, 1 070 cm(-1) were the characteristic peak of esters, terpenoids and saccharides, respectively. Moreover, the shape and peak intensity were more distinct in the second derivative spectrum of samples. In the second derivative spectrum range of 1 800-600 cm(-1), the fingerprint characteristic peak of samples and gentiopicroside standards were 1 679, 1 613, 1 466, 1 272, 1 204, 1 103, 1 074, 985, 935 cm(-1). The characteristic peak intensity of gentiopicroside of roots of wild and cultivated samples at 1 613 cm(-1) (C-C) was higher than stems and leaves which indicated the higher content of gentiopicroside in root than in stem and leaves. Stems of wild samples at 1 521, 1 462 and 1 452 cm(-1) are the skeletal vibration peak of benzene ring of lignin, and the stem of cultivated sample have stronger peak than other samples which showed that rich lignin in stems. The iInfrared spectrum of samples were similar with the average spectral of root of wild samples, and significant difference was found for the correlation between second derivative spectrum of samples

Rocks age and metamorphic occurrence from the southeastern part of Sao Paulo State and their crustal evaluation

International Nuclear Information System (INIS)

Tassinari, C.C.G.

1988-01-01

Pb-Pb and Rb-Sr whole rock isotope systematics and U-Pb on zircons method analyses are reported for rocks from the southeastern part of Sao Paulo state Brazil. The isotopic studies on granitic intrusions, orthogneissic rocks and migmatitic terranes, in this area, provides an important indication of the age and nature of the continental crust. (author) [pt

Self-evaluation in schizophrenia: an fMRI study with implications for the understanding of insight

Directory of Open Access Journals (Sweden)

Bedford Nicholas J

2012-08-01

Full Text Available Abstract Background Lack of insight is a core feature of schizophrenia and is associated with structural brain abnormalities. The functional neuroanatomy of insight has only recently been investigated. When people evaluate their personality traits compared to those of another, activation is seen in central midline structures (CMS of the brain. This study set out to compare cerebral activation in schizophrenia patients versus controls during a self-evaluation task which included positive and negative traits as well as mental and physical illness terms. Methods Eleven schizophrenia patients and 8 healthy controls, matched for age were studied. Insight was assessed using the Schedule for the Assessment of Insight-expanded version (SAI-E. FMRI data were obtained with a 1.5 Tesla GE system and interactions between participant group, self versus other, significant at the cluster level, were recorded. Results Significant hypoactivation in the medial superior frontal gyrus (dorsomedial prefrontal cortex was observed in patients vs. controls during self-evaluation of all traits combined. A second cluster of hypoactivation in the posterior cingulate was also detected. When the response to individual traits was explored, underactivation in other frontal regions plus right inferior parietal lobule emerged and this tended to correlate, albeit weakly with lower insight scores. Further, there were areas of hyperactivation relative to controls in anterior cingulate, frontal and parietal regions (especially precuneus which showed moderate inverse correlations with insight scores. Conclusions We have demonstrated that the CMS, identified as a key system underpinning self-evaluation, is dysfunctional in patients with schizophrenia, particularly dorso-medial PFC. This may have implications for lack of insight in schizophrenia. Hypofunction within the dorsomedial prefrontal region seems to be particularly important although other posterior and lateral cortical

The sustainability of communicative packaging concepts in the food supply chain. A case study: part 2. Life cycle costing and sustainability assessment

NARCIS (Netherlands)

Dobon, A.; Cordero, P.; Pereira da Silva, F.I.D.G.; Ostergaard, S.R.; Antvorskov, H.; Robertsson, M.; Smolander, M.; Hortal, M.

2011-01-01

This paper is the second part of a two-paper series dealing with the sustainability evaluation of a new communicative packaging concept. The communicative packaging concept includes a device that allows changing the expiry date of the product as function of temperature during transport and storage:

Litho-stratigraphic and hydrogeological evaluation of groundwater ...

African Journals Online (AJOL)

This study evaluates the subsurface geology and groundwater flow direction in Okpagha, Iguomo, Ikhueniro and Okhuahe suburbs in Benin City, Nigeria. Six boreholes were drilled by means of manual (rotary) method in different parts of the study area and each borehole was logged in order to understand the lithology, ...

Comparative study of heuristic evaluation and usability testing methods.

Science.gov (United States)

Thyvalikakath, Thankam Paul; Monaco, Valerie; Thambuganipalle, Himabindu; Schleyer, Titus

2009-01-01

Usability methods, such as heuristic evaluation, cognitive walk-throughs and user testing, are increasingly used to evaluate and improve the design of clinical software applications. There is still some uncertainty, however, as to how those methods can be used to support the development process and evaluation in the most meaningful manner. In this study, we compared the results of a heuristic evaluation with those of formal user tests in order to determine which usability problems were detected by both methods. We conducted heuristic evaluation and usability testing on four major commercial dental computer-based patient records (CPRs), which together cover 80% of the market for chairside computer systems among general dentists. Both methods yielded strong evidence that the dental CPRs have significant usability problems. An average of 50% of empirically-determined usability problems were identified by the preceding heuristic evaluation. Some statements of heuristic violations were specific enough to precisely identify the actual usability problem that study participants encountered. Other violations were less specific, but still manifested themselves in usability problems and poor task outcomes. In this study, heuristic evaluation identified a significant portion of problems found during usability testing. While we make no assumptions about the generalizability of the results to other domains and software systems, heuristic evaluation may, under certain circumstances, be a useful tool to determine design problems early in the development cycle.

Creep investigation of GFRP RC Beams - Part A : Literature review and experimental Study

Directory of Open Access Journals (Sweden)

masmoudi abdelmonem

2014-11-01

This paper (Part A presents a literature review and the loading history of six experimental beams reinforced with GFRP and steel bars. The results of this study revealed that Beams reinforced with GFRP are less marked with creep phenomenon.  This investigation should guide the civil engineer/designer for a better understanding creep phenomenon in GFRP reinforced concrete members.

Use of genomic data in risk assessment case study: II. Evaluation of the dibutyl phthalate toxicogenomic data set

Energy Technology Data Exchange (ETDEWEB)

Euling, Susan Y., E-mail: euling.susan@epa.gov [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Washington, DC (United States); White, Lori D. [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Kim, Andrea S. [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Washington, DC (United States); Sen, Banalata [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Wilson, Vickie S. [National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Keshava, Channa; Keshava, Nagalakshmi [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Washington, DC (United States); Hester, Susan [National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Ovacik, Meric A.; Ierapetritou, Marianthi G.; Androulakis, Ioannis P. [National Center for Environmental Research Science to Achieve Results (STAR) Bioinformatics Center, Environmental Bioinformatics and Computational Toxicology Center (ebCTC), Rutgers University and University of Medicine and Dentistry of New Jersey, Piscataway, NJ (United States); Gaido, Kevin W. [Center for Veterinary Medicine, U.S. Food and Drug Administration, Rockville, MD 20855 (United States)

2013-09-15

An evaluation of the toxicogenomic data set for dibutyl phthalate (DBP) and male reproductive developmental effects was performed as part of a larger case study to test an approach for incorporating genomic data in risk assessment. The DBP toxicogenomic data set is composed of nine in vivo studies from the published literature that exposed rats to DBP during gestation and evaluated gene expression changes in testes or Wolffian ducts of male fetuses. The exercise focused on qualitative evaluation, based on a lack of available dose–response data, of the DBP toxicogenomic data set to postulate modes and mechanisms of action for the male reproductive developmental outcomes, which occur in the lower dose range. A weight-of-evidence evaluation was performed on the eight DBP toxicogenomic studies of the rat testis at the gene and pathway levels. The results showed relatively strong evidence of DBP-induced downregulation of genes in the steroidogenesis pathway and lipid/sterol/cholesterol transport pathway as well as effects on immediate early gene/growth/differentiation, transcription, peroxisome proliferator-activated receptor signaling and apoptosis pathways in the testis. Since two established modes of action (MOAs), reduced fetal testicular testosterone production and Insl3 gene expression, explain some but not all of the testis effects observed in rats after in utero DBP exposure, other MOAs are likely to be operative. A reanalysis of one DBP microarray study identified additional pathways within cell signaling, metabolism, hormone, disease, and cell adhesion biological processes. These putative new pathways may be associated with DBP effects on the testes that are currently unexplained. This case study on DBP identified data gaps and research needs for the use of toxicogenomic data in risk assessment. Furthermore, this study demonstrated an approach for evaluating toxicogenomic data in human health risk assessment that could be applied to future chemicals