WorldWideScience

Sample records for estampagem tailored blanks

  1. Soldadura laser de sub-conjuntos para estampagem (Tailored blanks)

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1998-01-01

    Laser welding has an increasing role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped) being transformed in a vehicle body component. In ...

  2. Deep drawing simulation of Tailored Blanks

    NARCIS (Netherlands)

    van den Berg, Albert; Meinders, Vincent T.; Stokman, B.

    1998-01-01

    Tailored blanks are increasingly used in the automotive industry. A tailored blank consists of different metal parts, which are joined by a welding process. These metal parts usually have different material properties. Hence, the main advantage of using a tailored blank is to provide the right

  3. Tailor-welded blanks and their production

    Science.gov (United States)

    Yan, Qi

    2005-01-01

    Tailor welded blanks had been widely used in the automobile industry. A tailor welded blank consists of several flat sheets that were laser welded together before stamping. A combination of different materials, thickness, and coatings could be welded together to form a blank for stamping car body panels. As for the material for automobile industry, this technology was one of the development trend for automobile industry because of its weight reduction, safety improvement and economical use of materials. In this paper, the characters and production of tailor welded blanks in the market were discussed in detail. There had two major methods to produce tailor welded blanks. Laser welding would replace mesh seam welding for the production of tailor welded blanks in the future. The requirements on the edge preparation of unwelded blanks for tailor welded blanks were higher than the other steel processing technology. In order to produce the laser welded blank, there had the other process before the laser welding in the factory. In the world, there had three kinds of patterns for the large volume production of tailor welded blanks. In China, steel factory played the important role in the promotion of the application of tailor welded blanks. The competition for the supply of tailor welded blanks to the automobile industry would become fierce in the near future. As a result, the demand for the quality control on the production of tailor welded blanks would be the first priority concern for the factory.

  4. Formability of stainless steel tailored blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Gong, Hui; Olsen, Flemming Ove

    2004-01-01

    In a number of systematic tests, the formability of tailored blanks consisting of even and different combinations of AISI304 and AISI316 in thickness of 0.8 mm and 1.5 mm have been investigated. In order to analyse the formability of tailored blanks with different sheet thickness, a method based ...

  5. Laser welding of tailored blanks

    International Nuclear Information System (INIS)

    Pecas, P.; Gouveia, H.; Quintino, L.; Olsen, F.O.

    1998-01-01

    Laser welding has an increasing role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped) being transformed in a vehicle body component. In this paper low carbon CO 2 laser welding, on the thicknesses of 1,25 and 0.75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formability. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram. (Author) 14 refs

  6. Laser welding of tailored blanks

    Directory of Open Access Journals (Sweden)

    Peças, P.

    1998-04-01

    Full Text Available Laser welding has an incrising role in the automotive industry, namely on the sub-assemblies manufacturing. Several sheet-shape parts are laser welded, on a dissimilar combination of thicknesses and materials, and are afterwards formed (stamped being transformed in a vehicle body component. In this paper low carbon CO2 laser welding, on the thicknesses of 1,25 and 0,75 mm, formability investigation is described. There will be a description of how the laser welded blanks behave in different forming tests, and the influence of misalignment and undercut on the formibility. The quality is evaluated by measuring the limit strain and limit effective strain for the laser welded sheets and the base material, which will be presented in a forming limit diagram.

    A soldadura laser assume um papel cada vez mais importante na indústria automóvel, principalmente para a fabricação de sub-conjuntos constituídos por varias partes de chapa de diferentes espessuras (e diferentes materiais, que depois de estampados constituem um componente para integrar num veículo. Descreve-se neste artigo o trabalho de investigação de enformabilidade de chapa de ac.o de baixo carbono soldada por laser de CO2, nas espessuras de 1,25 e 0,75 mm. Apresenta-se uma descrição do comportamento das chapas soldadas por laser em diferentes testes de enformação, e a influência dos defeitos das soldaduras (desalinhamento e queda do banho-undercut no comportamento à enformação. A qualidade é avaliada pela medição da extensão limite e da extensão limite efectiva no material base e no material soldado, que serão representadas num diagrama de limite de enformabilidade.

  7. Deep drawing simulations of tailored blanks and experimental verification

    NARCIS (Netherlands)

    Meinders, Vincent T.; van den Berg, Albert; Huetink, Han

    2000-01-01

    Tailored Blanks are increasingly used in the automotive industry. A combination of different materials, thickness, and coatings can be welded together to form a blank for stamping car body panels. The main advantage of using Tailored Blanks is to have specific characteristics at particular parts of

  8. PULSED MODE LASER CUTTING OF SHEETS FOR TAILORED BLANKS

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    This paper describes how the laser cutting process can be optimised in such a way that the cut sheets can subsequently be used to laser weld tailored blanks. In a number of systematic laboratory experiments the effect of cutting speed, assist gas pressure, average laser power and pulse energy...... item for parameter optimisation of laser cut sheets used for tailored blanks. It was concluded that high quality cut edges with a squareness as small as 0.015 mm may be obtained. Such edges are well suited for subsequent laser welding....... was analysed. For quality assessment the squareness, roughness and dross attachment of laser cut blanks were measured. In all tests, the medium strength steel GA 260 with a thickness of 1.8 mm was used. In this work it has been successfully demonstrated that the squareness of a cut can be used as a quality...

  9. Tailor-made blanks for the aircraft industry

    NARCIS (Netherlands)

    Zad Poor, A.A.

    2010-01-01

    Tailor-Made Blanks (TMBs) are hybrid assemblies made of sheet metals with different materials and/or thicknesses that are joined together prior to forming. Alternatively, a monolithic sheet can be machined to create required thickness variations (machined TMBs). The possibility of having several

  10. FSW of Aluminum Tailor Welded Blanks across Machine Platforms

    Energy Technology Data Exchange (ETDEWEB)

    Hovanski, Yuri; Upadhyay, Piyush; Carlson, Blair; Szymanski, Robert; Luzanski, Tom; Marshall, Dustin

    2015-02-16

    Development and characterization of friction stir welded aluminum tailor welded blanks was successfully carried out on three separate machine platforms. Each was a commercially available, gantry style, multi-axis machine designed specifically for friction stir welding. Weld parameters were developed to support high volume production of dissimilar thickness aluminum tailor welded blanks at speeds of 3 m/min and greater. Parameters originally developed on an ultra-high stiffness servo driven machine where first transferred to a high stiffness servo-hydraulic friction stir welding machine, and subsequently transferred to a purpose built machine designed to accommodate thin sheet aluminum welding. The inherent beam stiffness, bearing compliance, and control system for each machine were distinctly unique, which posed specific challenges in transferring welding parameters across machine platforms. This work documents the challenges imposed by successfully transferring weld parameters from machine to machine, produced from different manufacturers and with unique control systems and interfaces.

  11. Process Design of Aluminum Tailor Heat Treated Blanks

    Directory of Open Access Journals (Sweden)

    Alexander Kahrimanidis

    2015-12-01

    Full Text Available In many industrials field, especially in the automotive sector, there is a trend toward lightweight constructions in order to reduce the weight and thereby the CO2 and NOx emissions of the products. An auspicious approach within this context is the substitution of conventional deep drawing steel by precipitation hardenable aluminum alloys. However, based on the low formability, the application for complex stamping parts is challenging. Therefore, at the Institute of Manufacturing Technology, an innovative technology to enhance the forming limit of these lightweight materials was invented. The key idea of the so-called Tailor Heat Treated Blanks (THTB is optimization of the mechanical properties by local heat treatment before the forming operation. An accurate description of material properties is crucial to predict the forming behavior of tailor heat treated blanks by simulation. Therefore, within in this research project, a holistic approach for the design of the THTB process in dependency of the main influencing parameters is presented and discussed in detail. The capability of the approach for the process development of complex forming operations is demonstrated by a comparison of local blank thickness of a tailgate with the corresponding results from simulation.

  12. Deep Drawing of High-Strength Tailored Blanks by Using Tailored Tools

    Directory of Open Access Journals (Sweden)

    Thomas Mennecart

    2016-01-01

    Full Text Available In most forming processes based on tailored blanks, the tool material remains the same as that of sheet metal blanks without tailored properties. A novel concept of lightweight construction for deep drawing tools is presented in this work to improve the forming behavior of tailored blanks. The investigations presented here deal with the forming of tailored blanks of dissimilar strengths using tailored dies made of two different materials. In the area of the steel blank with higher strength, typical tool steel is used. In the area of the low-strength steel, a hybrid tool made out of a polymer and a fiber-reinforced surface replaces the steel half. Cylindrical cups of DP600/HX300LAD are formed and analyzed regarding their formability. The use of two different halves of tool materials shows improved blank thickness distribution, weld-line movement and pressure distribution compared to the use of two steel halves. An improvement in strain distribution is also observed by the inclusion of springs in the polymer side of tools, which is implemented to control the material flow in the die. Furthermore, a reduction in tool weight of approximately 75% can be achieved by using this technique. An accurate finite element modeling strategy is developed to analyze the problem numerically and is verified experimentally for the cylindrical cup. This strategy is then applied to investigate the thickness distribution and weld-line movement for a complex geometry, and its transferability is validated. The inclusion of springs in the hybrid tool leads to better material flow, which results in reduction of weld-line movement by around 60%, leading to more uniform thickness distribution.

  13. Metal flow of a tailor-welded blank in deep drawing process

    Science.gov (United States)

    Yan, Qi; Guo, Ruiquan

    2005-01-01

    Tailor welded blanks were used in the automotive industry to consolidate parts, reduce weight, and increase safety. In recent years, this technology was developing rapidly in China. In Chinese car models, tailor welded blanks had been applied in a lot of automobile parts such as rail, door inner, bumper, floor panel, etc. Concerns on the properties of tailor welded blanks had become more and more important for automobile industry. A lot of research had shown that the strength of the welded seam was higher than that of the base metal, such that the weld failure in the aspect of strength was not a critical issue. However, formability of tailor welded blanks in the stamping process was complex. Among them, the metal flow of tailor welded blanks in the stamping process must be investigated thoroughly in order to reduce the scrap rate during the stamping process in automobile factories. In this paper, the behavior of metal flow for tailor welded blanks made by the laser welding process with two types of different thickness combinations were studied in the deep drawing process. Simulations and experiment verification of the movement of weld line for tailor welded blanks were discussed in detail. Results showed that the control on the movement of welded seam during stamping process by taking some measures in the aspect of blank holder was effective.

  14. Single point incremental forming of tailored blanks produced by friction stir welding

    DEFF Research Database (Denmark)

    Silva, M.B.; Skjødt, Martin; Vilaca, P.

    2009-01-01

    fromthe rotating single point-forming tool. Formability of the tailor welded blanks (TWB) is evaluated by means of benchmark tests carried out on truncated conical and pyramidal shapes and results are compared with similar tests performed on conventional reference blanks of the same material. Results show......This paper is focused on the single point incremental forming (SPIF) of tailored welded blanks produced by friction stirwelding (FSW). Special emphasis is placed on the know-how for producing the tailored blanks and on the utilization of innovative forming strategies to protect thewelding joint...... that the combination of SPIF with tailored welded blanks produced by FSW seems promising in the manufacture of complex sheet metal parts with high depths....

  15. Enabling high speed friction stir welding of aluminum tailor welded blanks

    Science.gov (United States)

    Hovanski, Yuri

    Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high-volumes. While friction stir welding (FSW) has traditionally been applied at linear velocities less than one meter per minute, high volume production applications demand the process be extended to higher velocities more amenable to cost sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low to moderate welding velocities do not directly translate to high speed linear friction stir welding. Therefore, in order to facilitate production of high volume aluminum FSW components, parameters were developed with a minimum welding velocity of three meters per minute. With an emphasis on weld quality, welded blanks were evaluated for post-weld formability using a combination of numerical and experimental methods. Evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum tailor-welded blanks, which provided validation of the numerical and experimental analysis of laboratory scale tests.

  16. High-Speed Friction-Stir Welding to Enable Aluminum Tailor-Welded Blanks

    Science.gov (United States)

    Hovanski, Yuri; Upadhyay, Piyush; Carsley, John; Luzanski, Tom; Carlson, Blair; Eisenmenger, Mark; Soulami, Ayoub; Marshall, Dustin; Landino, Brandon; Hartfield-Wunsch, Susan

    2015-05-01

    Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and they have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high volumes. While friction-stir welding (FSW) has been traditionally applied at linear velocities less than 1 m/min, high-volume production applications demand the process be extended to higher velocities more amenable to cost-sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low-to-moderate welding velocities do not directly translate to high-speed linear FSW. Therefore, to facilitate production of high-volume aluminum FSW components, parameters were developed with a minimum welding velocity of 3 m/min. With an emphasis on weld quality, welded blanks were evaluated for postweld formability using a combination of numerical and experimental methods. An evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum TWBs, which provided validation of the numerical and experimental analysis of laboratory-scale tests.

  17. Mechanical Behaviour Investigation Of Aluminium Alloy Tailor Welded Blank Developed By Using Friction Stir Welding Technique

    Science.gov (United States)

    Dwi Anggono, Agus; Sugito, Bibit; Hariyanto, Agus; Subroto; Sarjito

    2017-10-01

    The objective on the research was to investigate the mechanical properties and microstructure of tailor welded blank (TWB) made from AA6061-T6 and AA1100 using friction stir welding (FSW) process. Due to the dissimilar mechanical properties of the two aluminium alloys, microhardness test was conducted to measure the hardness distribution across the weld nugget. The mixing of two distinct materials was influenced by tool rotation speed. Therefore, microstructure analysis was carried out to investigate the grain size and shape. The grain size of AA6061-T6 has increased in the heat affected zone (HAZ) while for AA1100 has decreased. In the weld nugget, it has found a hook defects in the dissimilar aluminium joining. By using monotonic tensile load, the different weld line direction was observed with the expansion in tool rotation. The joints failure were consistently on the area of AA1100 series. Furthermore, two specimens were investigated, one through the dissimilar aluminium and the other through similiar material. Inspection of the weld nugget hardness was shown that nonhomogen material intermixing during the stiring process as confirmed by microhardness measurement.

  18. Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

    Science.gov (United States)

    Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

    2018-04-01

    When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

  19. Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

    Science.gov (United States)

    Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

    2018-06-01

    When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

  20. Application of the diode laser for welding in tairoled blanks; Aplicaciond el lase de diodo para la soldadura en tailored blanks

    Energy Technology Data Exchange (ETDEWEB)

    Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

    2004-07-01

    During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs.

  1. Aplicación del láser de diodo para la soldadura en tailored blanks

    Directory of Open Access Journals (Sweden)

    Bocos, J. L.

    2004-04-01

    Full Text Available During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performances, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE, DP "dual phase" and TRIP "transformation induced plasticity". These steels can be employed in "tailored blanks", which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams; and the mechanical behaviour has been analysed employing the following tests: microhardness, drawing, tensile and fatigue.

    Uno de los puntos de mayor interés para la industria de la automoción, en los últimos años, es la reducción en peso del automóvil y conseguir, con ello, rebajar el consumo de combustible. Disminuir el peso del automóvil y mantener unas elevadas prestaciones implica, entre otras actuaciones, la utilización de materiales en la carrocería que posean una elevada resistencia mecánica. En este trabajo se presenta el estudio de la viabilidad de la utilización del láser de diodo para la soldadura de chapas de acero de alta resistencia; concretamente de aceros ferríticos microaleados (ZStE, DP (dual phase y TRIP (transformation induced plasticity. Todos ellos, son materiales que pueden formar parte de tailored blanks que se definen como piezas constituidas por la unión, mediante soldadura, de chapas de acero de distintas calidades y espesores. En este estudio se ha profundizado en

  2. Design optimization of tailor-rolled blank thin-walled structures based on ɛ-support vector regression technique and genetic algorithm

    Science.gov (United States)

    Duan, Libin; Xiao, Ning-cong; Li, Guangyao; Cheng, Aiguo; Chen, Tao

    2017-07-01

    Tailor-rolled blank thin-walled (TRB-TH) structures have become important vehicle components owing to their advantages of light weight and crashworthiness. The purpose of this article is to provide an efficient lightweight design for improving the energy-absorbing capability of TRB-TH structures under dynamic loading. A finite element (FE) model for TRB-TH structures is established and validated by performing a dynamic axial crash test. Different material properties for individual parts with different thicknesses are considered in the FE model. Then, a multi-objective crashworthiness design of the TRB-TH structure is constructed based on the ɛ-support vector regression (ɛ-SVR) technique and non-dominated sorting genetic algorithm-II. The key parameters (C, ɛ and σ) are optimized to further improve the predictive accuracy of ɛ-SVR under limited sample points. Finally, the technique for order preference by similarity to the ideal solution method is used to rank the solutions in Pareto-optimal frontiers and find the best compromise optima. The results demonstrate that the light weight and crashworthiness performance of the optimized TRB-TH structures are superior to their uniform thickness counterparts. The proposed approach provides useful guidance for designing TRB-TH energy absorbers for vehicle bodies.

  3. Weldability of Advanced High Strength Steels using Ytterbium:Yttrium Aluminium Garnet high power laser for Tailor-Welded Blank applications

    Science.gov (United States)

    Sharma, Rajashekhar Shivaram

    Use of a high power Yb:YAG laser is investigated for joining advanced high strength steel materials for use in tailor-welded blank (TWB) applications. TWB's are materials of different chemistry, coating or thicknesses that are joined before metal forming and other operations such as trimming, assembly and painting are carried out. TWB is becoming an important design tool in the automotive industry for reducing weight, improving fuel economy and passenger safety, while reducing the overall costs for the customer. Three advanced high strength steels, TRIP780, DP980 and USIBOR, which have many unique properties that are conducive to achieving these objectives, along with mild steel, are used in this work. The objective of this work is to ensure that high quality welds can be obtained using Yb:YAG lasers which are also becoming popular for metal joining operations, since they produce high quality laser beams that suffer minimal distortion when transported via fiber optic cables. Various power levels and speeds for the laser beam were used during the investigation. Argon gas was consistently used for shielding purposes during the welding process. After the samples were welded, metallographic examination of the fusion and heat-affected zones using optical and scanning electron microscopes were carried out to determine the microstructures as well as weld defects. Optical and scanning electron microscopes were also used to examine the top of welds as well as fracture surfaces. Additionally, cross-weld microhardness evaluations, tensile tests using Instron tester, limited fatigue tests as well as formability evaluations using OSU plane strain evaluation were carried out. The examinations included a 2-factor full factorial design of experiments to determine the impact of coatings on the surface roughness on the top of the welds. Tensile strengths of DP980, TRIP780 and mild steel materials as well as DP980 welded to TRIP780 and mild steel in the rolling direction as well as

  4. Forming Tests for Laser Welded Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove; Rasmussen, Mads

    1998-01-01

    Ratio test (LDR)Tensile testBulge testMarziniak testPractical examples obtained for laser welded blanks are shown. In combination, tensile tests and the Bulge test can form the so-called Forming Limiting Curves and examples of curves obtained from laser welded blanks are shown.......In this paper different means for testing the formability of new material combinations used as tailored blanks in the automotive industry are presented. The following forming techniques will be described and their benefits and drawbacks presented :Limiting Dome Height test (LDH)Limiting Drawing...

  5. Laser cutting of sheets for Tailored Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    sound welds. Laser cutting the sheets may therefore be an alternative to shear cutting, if the cut kerf squareness can be kept below 0.05 mm.In a number of systematic laboratory experiments the effects of the major process parameters in laser cutting have been investigated. Each cut was quantified...... by the squareness, the surface roughness and the burr height. Mild steel as well as high strength steel with and with out galvanisation with thickness' of 0.7(5) and 1.25 were used.In the tests the difference in cut quality between a 5" and a 7.5" focusing lens were tested and the effect of using pulsed mode laser...

  6. Caracterização microestrutural e propriedades mecânicas da liga de alumínio 2198-T851 em configuração tailored blank soldada por FSW - Friction Stir Welding

    Directory of Open Access Journals (Sweden)

    Ivan Moroz

    2012-03-01

    Full Text Available Nos setores industriais relacionados à aeronáutica e automobilística, tem-se buscado o desenvolvimento e a aplicação de ligas metálicas leves com o intuito da redução de massa dos produtos e consequente redução do consumo de combustível. Por suas dimensões e requisitos estruturais, componentes e seções de aviões e automóveis são produzidos através da união por processos de soldagem por fusão. Entretanto, processos de soldagem no estado sólido são preferíveis por evitar defeitos decorrentes da fusão, e têm sido objeto de estudo nas últimas duas décadas. Este trabalho teve por objetivo a caracterização de uma solda por FSW - Friction Stir Welding em junta de topo, da Liga de Alumínio 2198-T851 com espessuras diferentes (configuração "Tailored Blanks". A metodologia utilizada na caracterização envolveu a determinação das propriedades mecânicas das juntas soldadas, compreendendo ensaios de tração e determinação de perfil de microdureza na seção transversal; e buscou-se compreender a relação entre as alterações microestruturais promovidas pelo processo de soldagem e as propriedades resultantes. Concluiu-se que, devido aos fenômenos metalúrgicos decorrentes do processo de soldagem utilizado, alterações microestruturais tais como refino de grão, encruamento e dissolução/formação de fases precipitadas permitiram a obtenção de uma solda cujas propriedades mecânicas de tração (salvo alongamento igualaram-se a ou excederam aquelas do metal base, evidenciando a viabilidade de utilização dos parâmetros de soldagem por FSW utilizados neste trabalho.In both aeronautic and automobile related industries, development and application of light-weighted metallic alloys have been pursued with the intention of reducing product weight and consequent fuel consumption. Due to their dimension and structural requirements, components and sections from airplanes and automobiles are produced through fusion

  7. Modified blank ammunition injuries.

    Science.gov (United States)

    Ogunc, Gokhan I; Ozer, M Tahir; Coskun, Kagan; Uzar, Ali Ihsan

    2009-12-15

    Blank firing weapons are designed only for discharging blank ammunition cartridges. Because they are cost-effective, are easily accessible and can be modified to live firearms plus their unclear legal situation in Turkish Law makes them very popular in Turkey. 2004 through 2008, a total of 1115 modified blank weapons were seized in Turkey. Blank firing weapons are easily modified by owners, making them suitable for discharging live firearm ammunition or modified blank ammunitions. Two common methods are used for modification of blank weapons. After the modification, these weapons can discharge the live ammunition. However, due to compositional durability problems with these types of weapons; the main trend is to use the modified blank ammunitions rather than live firearm ammunition fired from modified blank firing weapons. In this study, two types of modified blank weapons and two types of modified blank cartridges were tested on three different target models. Each of the models' shooting side was coated with 1.3+/-2 mm thickness chrome tanned cowhide as a skin simulant. The first model was only coated with skin simulant. The second model was coated with skin simulant and 100% cotton police shirt. The third model was coated with skin simulant and jean denim. After the literature evaluation four high risky anatomic locations (the neck area; the eyes; the thorax area and inguinal area) were pointed out for the steel and lead projectiles are discharged from the modified blank weapons especially in close range (0-50 cm). The target models were designed for these anatomic locations. For the target models six Transparent Ballistic Candle blocks (TCB) were prepared and divided into two test groups. The first group tests were performed with lead projectiles and second group with steel projectile. The shortest penetration depth (lead projectile: 4.358 cm; steel projectile 8.032 cm) was recorded in the skin simulant and jean denim coated block for both groups. In both groups

  8. Eletroerosão por fio em metal duro para ferramentas de estampagem de lâminas de motores elétricos

    OpenAIRE

    Hespanhol, Heber de Carvalho

    2009-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Mecânica. O processo de eletroerosão por fio é utilizado atualmente na fabricação da maioria das matrizes e punções de metal duro (carbeto de tungstênio), usados em ferramentas de estampagem de aços para motores elétricos. As indústrias de eletrodomésticos, motores elétricos industriais, transformadores e compressores herméticos, utilizam ferramentas progressivas de...

  9. Improving friction stir welding of blanks of different thicknesses

    Energy Technology Data Exchange (ETDEWEB)

    Fratini, L. [Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, Universita di Palermo, Viale delle Scienze, 90128 Palermo (Italy)], E-mail: abaqus@dtpm.unipa.it; Buffa, G. [Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, Universita di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Shivpuri, R. [Ohio State University, Department of Industrial, Welding and Systems Engineering, 1971 Neil Avenue, 210 Baker Systems, Columbus, Ohio 43210 (United States)

    2007-06-25

    Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed.

  10. Improving friction stir welding of blanks of different thicknesses

    International Nuclear Information System (INIS)

    Fratini, L.; Buffa, G.; Shivpuri, R.

    2007-01-01

    Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed

  11. Steroid radioimmunoassays. The problems of blanks

    Energy Technology Data Exchange (ETDEWEB)

    Shinde, Y; Hacker, R R; Ntunde, B; Smith, V G [Guelph Univ., Ontario (Canada). Dept. of Animal and Poultry Science

    1981-06-01

    An estrogen radioimmunoassay was used to study the problem of blanks in steroid assays. Negligible binding (1.5 percent) in the non-antibody tubes prevailed throughout the study. The assay was validated using accepted procedures. Both water and solvent blanks had estrogen concentrations of 7-9 pg/tube. However, neither water nor solvent blanks showed a dose-related response, indicating that they were 'real' blanks. Exogenous estradiol, when added to water and solvent in quantities less than the estimated blank, was not quantitatively recovered. However, exogenous estradiol added to the water solvent in quantities greater than the blank estimate was quantitatively recovered. The sensitivity of the reference standard curve was 6-10 pg/tube, approximately the same as the blank estimate. These results indicated that the estimates of water and solvent blanks were measures of the assay sensitivity. In such circumstances, it is suggested that blank estimates should not be subtracted from sample values. If the blank estimates are high, attention should be directed towards improving the sensitivity of the assay.

  12. NDE of ceramic insulator blanks by radiography

    International Nuclear Information System (INIS)

    Sarvanan, S.; Venkatraman, B.; Jayakumar, T.; Baldev Raj

    1996-01-01

    The production of ceramic insulators in electrical industry involves a number of steps, one of which is the green blank. The defects such as voids and crack can be present in the extruded green blank. One of the best non-destructive evaluation (NDE) technique radiography. This paper deals with the development of methodology based on theoretical modeling for the examination of ceramics by high sensitivity radiography. (author)

  13. Automatic classification of blank substrate defects

    Science.gov (United States)

    Boettiger, Tom; Buck, Peter; Paninjath, Sankaranarayanan; Pereira, Mark; Ronald, Rob; Rost, Dan; Samir, Bhamidipati

    2014-10-01

    Mask preparation stages are crucial in mask manufacturing, since this mask is to later act as a template for considerable number of dies on wafer. Defects on the initial blank substrate, and subsequent cleaned and coated substrates, can have a profound impact on the usability of the finished mask. This emphasizes the need for early and accurate identification of blank substrate defects and the risk they pose to the patterned reticle. While Automatic Defect Classification (ADC) is a well-developed technology for inspection and analysis of defects on patterned wafers and masks in the semiconductors industry, ADC for mask blanks is still in the early stages of adoption and development. Calibre ADC is a powerful analysis tool for fast, accurate, consistent and automatic classification of defects on mask blanks. Accurate, automated classification of mask blanks leads to better usability of blanks by enabling defect avoidance technologies during mask writing. Detailed information on blank defects can help to select appropriate job-decks to be written on the mask by defect avoidance tools [1][4][5]. Smart algorithms separate critical defects from the potentially large number of non-critical defects or false defects detected at various stages during mask blank preparation. Mechanisms used by Calibre ADC to identify and characterize defects include defect location and size, signal polarity (dark, bright) in both transmitted and reflected review images, distinguishing defect signals from background noise in defect images. The Calibre ADC engine then uses a decision tree to translate this information into a defect classification code. Using this automated process improves classification accuracy, repeatability and speed, while avoiding the subjectivity of human judgment compared to the alternative of manual defect classification by trained personnel [2]. This paper focuses on the results from the evaluation of Automatic Defect Classification (ADC) product at MP Mask

  14. Mathematical model of the crystallizing blank`s thermal state at the horizontal continuous casting machine

    Directory of Open Access Journals (Sweden)

    Kryukov Igor Yu.

    2017-01-01

    Full Text Available Present article is devoted to the development of the mathematical model, which describes thermal state and crystallization process of the rectangular cross-section blank while continious process of extraction from a horysontal continious casting machine (HCCM.The developed model took cue for the heat-transfer properties of non-iron metal teeming; its temperature on entry to the casting mold; cooling conditions of blank in the carbon molds in the presence of a copper water cooler. Besides, has been considered the asymmetry of heat interchange from blank`s head and drag at mold, coming out from fluid contraction and features of the horizontal casting mold. The developed mathematical model allows to determine alterations in crystallizing blank of the following factors with respect to time: temperature pattern of crystallizing blank under different technical working regimes of HCCM; boundaries of solid two-phase field and liquid two-phase filed; blank`s thickness variation under shrinkage of the ingot`s material

  15. Performance of mesh seam welds in tailor welded blanks; Terado blank yo mash seam yosetsubu no tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Uchihara, M; Takahashi, M; Kurita, M; Hirose, Y; Fukui, K [Sumitomo Metal Industries, Ltd., Osaka (Japan)

    1997-10-01

    Formability, fatigue properties and corrosion behavior of mash seam welded steel sheets were investigated and the results were compared with laser weld. The stretch formability of mash seam weld and laser weld were same level. Mash seam weld however, showed slightly smaller formability in hole expansion test. The fatigue strength of mash seam welds was lower than that of laser welds in case of differential thickness joints. Corrosion was apt to initiate at weld in both mash seam and laser weld with E-coat. The corrosion resistance of welds was improved by using zinc coated steel. 3 refs., 14 figs., 2 tabs.

  16. Lubricant test for punching and blanking

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

    2003-01-01

    Punching/blanking is one of the tribologically wise most severe metal forming processes.Insu $cient lubrication leads to heavy pick-up of work piece material on the punch stem,bad tolerances and eventual breakdown of the punch due to excessive backstroke force,especially in case of tribologically...... of alternative lubricants the present paper describes a new lubricant test for punching....

  17. Design and economic justification of group blanks application

    Directory of Open Access Journals (Sweden)

    V. Todić

    2012-04-01

    Full Text Available Within the manufacturing process planning, blanks are either selected or designed, respectively forms of input material for the manufacture of products. Reviewed in this paper are three types of group blanks: group castings, group forgings manufactured by closed die forging and free forging, and group blanks manufactured by pressing melted metal in casts. The paper also presents requisites for design and evaluation of economic justification of group blanks application.

  18. System 6: A pricing strategy for long blanks

    Science.gov (United States)

    Hugh W. Reynolds; Bruce G. Hansen; Bruce G. Hansen

    1986-01-01

    In System 6, small-diameter, low-grade hardwood timber is used to make blanks in standard sizes. Blanks are made in one thickness and one quality class but in all the standard lengths during each production run. The quantity of blanks per length can be varied, while keeping total yield high, by using proper production control techniques. However, when the percentage of...

  19. Finite Element Simulation of Blanking Process

    Directory of Open Access Journals (Sweden)

    Afzal Ahmed

    2012-10-01

    Full Text Available ABSTRACT: The blanking process can be simulated by ABAQUS v 6.4 to select punch, die and press and ascertain punch wear and bur height. The experimental and the simulation results agree well with rising punch force up to the point of creation of crack. For a 2mm mild steel sheet, the simulation shows that for the punch force of 240 kN, the crack starts at 30% punch penetration depth and punch force suddenly drops to a value of 70 kN and remains steady till the blanking is complete. Comparing simulation and experimental results for a 3mm mild steel sheet, results agree well in the elastic range with the punch force rising up to point of crack creation. However, a discrepancy appears in punch force which increases with punch penetration. At 32% depth of penetration, the discrepancy is 12 % which increases to 60 % at punch penetration of 42%. Punch force for experimental and simulation results remains about 90kN beyond punch penetration of 62%. Also, increase of the thickness of sheet results in reduced crack height and improved quality of blank.ABSTRAK: Proses pengosongan boleh disimulasikan oleh ABAQUS versi 6.4 untuk memilih tebuk, alat dan tekan; dan menentukan haus tebuk dan ketinggian duri. Keputusan ujikaji dan simulasi adalah serupa dengan kenaikan daya tebuk hingga titik retakan diperolehi. Bagi kepingan keluli ringan 2mm simulasi menunjukkan bahawa untuk tenaga tebukan sebanyak 240 kN, retak bermula pada 30% kedalaman penembusan 30% tebukan dan daya tebuk tiba-tiba jatuh kepada 70 kN dan jumplah ini kekal sehingga proses pengosongan selesai.  Apabila hasil simulasi dan eksperimen dibandingkan, keputusan experimen untuk keluli lembut 3mm, bersetuju dengan baik dalam julat anjal dan daya tebukan meningkat sehingga titik penciptaan retak diperolehi. Walau bagaimanapun percanggahan muncul apabila daya tebukan meningkat dengan daya penembusan. Pada kedalaman penembusan 32% percanggahan adalah 12% dan nilai ini meningkat kepada 60% apabila

  20. Application of the diode laser for welding in tairoled blanks

    International Nuclear Information System (INIS)

    Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

    2004-01-01

    During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs

  1. Application of field blanks in odour emission research

    NARCIS (Netherlands)

    Ogink, Nico W.M.; Klarenbeek, Johannes V.

    2016-01-01

    In the Netherlands field blanks are mandatory when sampling odour emission. Field blanks are matrices that have negligible or unmeasurable amounts of the substance of interest. They are used to document possible contamination during sampling, transport and storage of samples. Although field

  2. Warm forming simulation of titanium tailor-welded blanks with experimental verification

    International Nuclear Information System (INIS)

    Lai, C. P.; Chan, L. C.; Chow, C. L.

    2007-01-01

    The simulation of the forming process of Ti-TWBs at elevated temperatures using finite element analysis to determine the optimum forming conditions of Ti-TWBs is presented in this paper. For verification of the simulation results, titanium alloy (Ti-6Al-4V) was selected for the first instance to prepare the specimen of Ti-TWBs. The thickness combinations of 0.7mm/1.0mm and in widths of 20mm, 90mm and 110mm were used. A specific tooling system with temperature control device was developed to the forming of Ti-TWBs at 550 deg. C. A cylindrical punch of 50mm diameter was designed and manufactured. Different forming parameters (i.e. traveling distance of the punch and the stroke as well as the time of each forming process) and material characteristics under various temperatures were measured. In addition, the true stress and strain values by tensile test as well as the major and minor strain distributions of forming Ti-TWBs at elevated temperatures by Swift Forming test were carried out and applied as input into the finite element program. The simulation results indentify failure locations and Limit Dome Height (LDH) of Ti-TWBs at elevated temperatures and were compared with the measured ones. Finally, the optimum forming conditions of Ti-TWBs were determined based on the experimentally verified simulation results

  3. Steroid radioimmunoassay: contribution of standards to blank values, ch. 4

    International Nuclear Information System (INIS)

    Froelich, M.; Termorshuizen, W.; Kenter, E.; Molenaar, A.J.

    1977-01-01

    The sensitivity of the radioimmunoassay of steroids is considerably reduced by high blank values which may be derived in part from co-chromatographed standards. Blank levels approach the detection limit of the radioimmunoassay of aldosterone, testosterone and androstenedione when 10,000 dpm (30-35 pg) labelled steroids are used as reference standard. When 20 μg aldosterone, testosterone, or androstenedione is used as standard, blank levels of up to 12,800 pg were measured in the radioimmunoassay. Application of the standards on a separate strip does not improve the results. From the experiments it appeared that contamination took place by transport by the solvent

  4. Application of hard coatings for blanking and piercing tools

    DEFF Research Database (Denmark)

    Podgornik, B.; Zajec, B.; Bay, Niels

    2011-01-01

    The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing...... critical value under dry friction conditions and leads to tool failure. Therefore, at present oxidation and temperature resistant hard coatings can give improved wear resistance of stamping tools, but elimination of lubricants in blanking and piercing processes is still not feasible....

  5. Blanking and piercing theory, applications and recent experimental results

    International Nuclear Information System (INIS)

    Zaid, A. I. O.

    2013-01-01

    Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The above mentioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is also given and discussed. (author)

  6. Blanking and piercing theory, applications and recent experimental results

    International Nuclear Information System (INIS)

    Zaid, Adnan l O

    2014-01-01

    Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The abovementioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is alsogiven and discussed

  7. 3D finite element modelling of sheet metal blanking process

    Science.gov (United States)

    Bohdal, Lukasz; Kukielka, Leon; Chodor, Jaroslaw; Kulakowska, Agnieszka; Patyk, Radoslaw; Kaldunski, Pawel

    2018-05-01

    The shearing process such as the blanking of sheet metals has been used often to prepare workpieces for subsequent forming operations. The use of FEM simulation is increasing for investigation and optimizing the blanking process. In the current literature a blanking FEM simulations for the limited capability and large computational cost of the three dimensional (3D) analysis has been largely limited to two dimensional (2D) plane axis-symmetry problems. However, a significant progress in modelling which takes into account the influence of real material (e.g. microstructure of the material), physical and technological conditions can be obtained by using 3D numerical analysis methods in this area. The objective of this paper is to present 3D finite element analysis of the ductile fracture, strain distribution and stress in blanking process with the assumption geometrical and physical nonlinearities. The physical, mathematical and computer model of the process are elaborated. Dynamic effects, mechanical coupling, constitutive damage law and contact friction are taken into account. The application in ANSYS/LS-DYNA program is elaborated. The effect of the main process parameter a blanking clearance on the deformation of 1018 steel and quality of the blank's sheared edge is analyzed. The results of computer simulations can be used to forecasting quality of the final parts optimization.

  8. Blanking Clearance and Punch Velocity Effects on The Sheared Edge Characteristic in Micro-Blanking of Commercially Pure Copper Sheet

    Directory of Open Access Journals (Sweden)

    Didin Zakaria Lubis

    2017-11-01

    Full Text Available This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr height and rollover, and a larger shear zone. Furthermore, it could be observed that the part-edge quality improvement when blanking with high punch velocity is much more distinct for stele than for copper. According to blanking theory, this improvement was expected because copper have much higher heat conduction coefficients. Therefore, the heat dissipates faster and the desired stress relief effect does not take place to the same degree as for stele.

  9. Blanking Clearance and Punch Velocity Effects on The Sheared Edge Characteristic in Micro-Blanking of Commercially Pure Copper Sheet

    OpenAIRE

    Didin Zakaria Lubis; Ichsan Ristiawan

    2017-01-01

    This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr h...

  10. Topical erythromycin vs blank vehicle in a multiclinic acne study.

    Science.gov (United States)

    Jones, E L; Crumley, A F

    1981-09-01

    A stable solution of erythromycin was developed using a vehicle of ethanol, propylene glycol, and citric acid buffer. In a controlled, randomized, double-blind comparison, a 2% solution of erythromycin applied to moderately severe facial acne was found to be superior to the blank vehicle in reducing the number of inflamed papules. During a period of 12 weeks, such papules were reduced by 56% in the erythromycin group, compared with 33% in the blank vehicle group. In the erythromycin group, 62% of the subjects had a good or excellent response, compared with 27% of those in the blank vehicle group. Adverse effects were similar in type in both groups and included redness, scaling, dryness, oiliness, burning, itching, and irritation of the eyes. No allergic reactions or skin infections were encountered.

  11. Optimization of blanking process using neural network simulation

    International Nuclear Information System (INIS)

    Hambli, R.

    2005-01-01

    The present work describes a methodology using the finite element method and neural network simulation in order to predict the optimum punch-die clearance during sheet metal blanking processes. A damage model is used in order to describe crack initiation and propagation into the sheet. The proposed approach combines predictive finite element and neural network modeling of the leading blanking parameters. Numerical results obtained by finite element computation including damage and fracture modeling were utilized to train the developed simulation environment based on back propagation neural network modeling. The comparative study between the numerical results and the experimental ones shows the good agreement. (author)

  12. Super-Resolution Algorithm in Cumulative Virtual Blanking

    Science.gov (United States)

    Montillet, J. P.; Meng, X.; Roberts, G. W.; Woolfson, M. S.

    2008-11-01

    The proliferation of mobile devices and the emergence of wireless location-based services have generated consumer demand for precise location. In this paper, the MUSIC super-resolution algorithm is applied to time delay estimation for positioning purposes in cellular networks. The goal is to position a Mobile Station with UMTS technology. The problem of Base-Stations herability is solved using Cumulative Virtual Blanking. A simple simulator is presented using DS-SS signal. The results show that MUSIC algorithm improves the time delay estimation in both the cases whether or not Cumulative Virtual Blanking was carried out.

  13. 17 CFR 230.419 - Offerings by blank check companies.

    Science.gov (United States)

    2010-04-01

    ... derivative securities relating to securities held in the escrow or trust account may be exercised or... other derivative securities issued in the initial offering are exercisable, there is a continuous... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Offerings by blank check...

  14. Dogs can discriminate human smiling faces from blank expressions.

    Science.gov (United States)

    Nagasawa, Miho; Murai, Kensuke; Mogi, Kazutaka; Kikusui, Takefumi

    2011-07-01

    Dogs have a unique ability to understand visual cues from humans. We investigated whether dogs can discriminate between human facial expressions. Photographs of human faces were used to test nine pet dogs in two-choice discrimination tasks. The training phases involved each dog learning to discriminate between a set of photographs of their owner's smiling and blank face. Of the nine dogs, five fulfilled these criteria and were selected for test sessions. In the test phase, 10 sets of photographs of the owner's smiling and blank face, which had previously not been seen by the dog, were presented. The dogs selected the owner's smiling face significantly more often than expected by chance. In subsequent tests, 10 sets of smiling and blank face photographs of 20 persons unfamiliar to the dogs were presented (10 males and 10 females). There was no statistical difference between the accuracy in the case of the owners and that in the case of unfamiliar persons with the same gender as the owner. However, the accuracy was significantly lower in the case of unfamiliar persons of the opposite gender to that of the owner, than with the owners themselves. These results suggest that dogs can learn to discriminate human smiling faces from blank faces by looking at photographs. Although it remains unclear whether dogs have human-like systems for visual processing of human facial expressions, the ability to learn to discriminate human facial expressions may have helped dogs adapt to human society.

  15. ZERODUR 4-m blank surviving up to 20 g acceleration

    Science.gov (United States)

    Westerhoff, Thomas; Werner, Thomas; Gehindy, Thorsten

    2017-09-01

    The glass ceramic ZERODUR developed as astronomical telescope mirror substrate material has been widely used in many telescopes due to its excellent small coefficient of thermal expansion. Many large and medium sized mirror substrate blanks have been delivered in the almost 50 years of ZERODUR business so far. Packaging and transportation of mirror substrates of 4 to 8 m in diameter with a weight between 3 and 20 tons requires special attention and sophisticated skills to successful deliver the blanks to their destination at polishing shops all over the world. Typically, a combination of road and sea transport needs to be organized. The requirements on the transport container are depending on the transport route and may vary from destination to destination. In any case the container needs to be able to sufficiently support the multi ton ZERODUR blank to avoid breaking under gravity. Additionally, the configuration needs to be able to absorb shocks happening during transport and loading between truck trailer and ship. For insurance reasons the transport container is always equipped with a GPS trackable shock recorder allowing to download the recorded accelerations on the container and the blank throughout the entire journey. This paper reports on the event of a 4 m class ZERODUR blank exposed to shocks up to 20 g during transport. The event will be discussed in detail together with lessons learned to avoid such events for future transports. Additionally, the 20 g acceleration will be discussed in respect to the data on bending strength for ZERODUR ground surfaces reported in numerous papers by Peter Hartmann et.al. in the last couple of years.

  16. On Number of Almost Blank Subframes in Heterogeneous Cellular Networks

    OpenAIRE

    Cierny, Michal; Wang, Haining; Wichman, Risto; Ding, Zhi; Wijting, Carl

    2013-01-01

    In heterogeneous cellular scenarios with macrocells, femtocells or picocells users may suffer from significant co-channel cross-tier interference. To manage this interference 3GPP introduced almost blank subframe (ABSF), a subframe in which the interferer tier is not allowed to transmit data. Vulnerable users thus get a chance to be scheduled in ABSFs with reduced cross-tier interference. We analyze downlink scenarios using stochastic geometry and formulate a condition for the required number...

  17. Tailored Porous Materials

    Energy Technology Data Exchange (ETDEWEB)

    BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.

    1999-11-09

    Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

  18. The Psychological Concepts in Taylor Swift's "Blank Space"

    OpenAIRE

    Anindhita, Novia Putri

    2016-01-01

    Blank Space” is a song that is sung by a singer, Taylor Swift. The lyrics tell about the lonely woman who dates a lot but always fails to manage her relationship. However, it does not make her worry to start a new relationship. The purpose of this study is to analyze the elements of the poetry in the lyrics and to show the readers the psychological contents as portrayed in the music video. The study uses intrinsic and extrinsic theories to analyze the data and library research to compile the...

  19. Die betekenis wat geld vir blankes en kleurlinge inhou

    Directory of Open Access Journals (Sweden)

    D. L. Visagie

    1978-11-01

    ‘n Oorsig van relevante literatuur dui daarop dat die betekenis van geld (wat 'n belangrike plek in sekere motiveringsteorieë inneem van persoon tot persoon kan verskil. Hierdie verskil kan hoofsaaklik aan persoonlike- en agtergrondsfaktore toegeskryf word. Wanneer die genoemde faktore binne groepsverband ooreenstem, ontwikkel en vorm daar unieke “groepsbetekenisse" wat aan sekere begrippe geheg word. Betekenismeting wat in hierdie ondersoek deur middel van die semantiese differensiaal op 128 Blanke- en 109 Kleurlingstudente uitgevoer is, toon egter oor die algemeen geen beduidende verskil ten opsigte van die begrip geld nie. Slegs ten opsigte van twee van 15 semantiese skale is beduidende verskille tussen die twee groepe gevind.

  20. Numerical investigation of blanking for metal polymer sandwich sheets

    Directory of Open Access Journals (Sweden)

    Gutknecht Florian

    2016-01-01

    Full Text Available Metal polymer sandwich sheets consist of materials with drastically different mechanical properties. Due to this fact and because of high local gradients in the cutting zone during the blanking process, traditional process strategies and empirical knowledge are difficult to apply. A finite-element simulation of the shear cutting process is used to predict the necessary force and the geometry of the cutting surface. A fully-coupled ductile damage model is used for the description of the material behaviour. This model considers the influence of shear and compression-dominated stress states on the initiation of damage. Experimental tensile and compression test data is used for the identification of material parameters. The results of the blanking simulation are compared with experimental data. Furthermore, the evolution of the stress state is analysed to gain understanding of the underlying physics. Finally this model enables the prediction of core compression and other quantities such as the acting stresses and corresponding triaxilities, which provide valuable information for the development of analytical models.

  1. Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes

    Science.gov (United States)

    Besserer, Hans-Bernward; Hildenbrand, Philipp; Gerstein, Gregory; Rodman, Dmytro; Nürnberger, Florian; Merklein, Marion; Maier, Hans Jürgen

    2016-03-01

    To produce parts from sheet metal with thickened functional elements, bulk forming operations can be employed. For this new process class, the term sheet-bulk metal forming has been established recently. Since sheet-bulk metal forming processes such as orbital forming generates triaxial stress and strain states, ductile damage is induced in the form of voids in the microstructure. Typical parts will experience cyclic loads during service, and thus, the influence of ductile damage on the fatigue life of parts manufactured by orbital forming is of interest. Both the formation and growth of voids were characterized following this forming process and then compared to the as-received condition of the ferritic deep drawing steel DC04 chosen for this study. Subsequent to the forming operation, the specimens were fatigued and the evolution of ductile damage and the rearrangement of the dislocation networks occurring during cyclic loading were determined. It was shown, that despite an increased ductile damage due to the forming process, the induced strain hardening has a positive effect on the fatigue life of the material. However, by analyzing the fatigued specimens a development of the ductile damage by an increasing number of voids and a change in the void shape were detected.

  2. Application Of CO2 Lasers To High Speed Blanking

    Science.gov (United States)

    Grenier, L. E.

    1986-11-01

    While laser cutting of sheetmetal has attained wide acceptance in the automotive industry for the purposes of prototyping and very limited preproduction work, the production rates possible with currently available systems have precluded the use of this technique in a production environment. The device design to be described embodies a high speed X-Y positioner carrying a cutting head with limited Z-axis capability. This approach confers two main benefits, first, production rate is limited only by laser power, since the positioner technology selected will permit movement at rates up to 1.5 m/s (60 in/s), second, the use of a high speed non-contact surface follower to control the Z-axis movement reduces the need to clamp the workpiece rigidly to a precision reference surface. The realized reduction of the clamping requirement permits some latitude in the feed methods that can be employed, allowing the use of coil or sheet feeding as appropriate. The author will provide estimated production rates for the proposed design and demonstrate that a suitable choice of laser source and material feed will permit the production of parts at a rate and cost comparable to conventional blanking with the advantage of much greater flexibility and reduced retooling time.

  3. Centrifugal vacuum casting for fuel cladding tube blanks

    International Nuclear Information System (INIS)

    Zelenskii, V.F.; Neklyudov, I.M.; Chernyi, B.P.; Zeidlits, M.P.; Vanzha, A.F.; Rubashko, V.G.; Ryabchikov, L.N.; Smirnov, Y.K.; Bespalova, V.R.; Mashkarova, V.T.; Rybal'chenko, N.D.

    1990-01-01

    An advanced technique for making tube blanks with an acceptable level of nonmetallic inclusions is vacuum induction melting combined with centrifugal casting, as the latter gives a cylindrical casting having an axial hole, while the cast metal has elevated density and contains fewer nonmetallic inclusions than does the metal cast in a stationary mold. The reduction in the nonmetallic inclusions occurs because of increased rates of floating up in the rotating mold on account of the centrifugal force and the rejection to the inner surface. One can choose the parameters such as the pouring speed, rotational speed, mold cooling, and liquid-metal temperature and can introduce a deoxidizer to remove the nonmetallic inclusions or reduce the grain size of them and produce an appropriate cast structure and obtain a metal whose quality is the same as that on vacuum induction melting with secondary arc remelting. For these purposes, the authors have developed centrifugal-casting machines for use under vacuum or in inert gases with horizontal and vertical mold rotation axes

  4. Application of Hard Coatings for Improved Tribological Performance of Blanking and Piercing Tools

    DEFF Research Database (Denmark)

    Podgornik, B.; Zajec, B.; Bay, Niels

    2010-01-01

    The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing applicat...

  5. Exploring Valued-Added Options - Edge-Glued Panels and Blanks Offer Value-Added Opportunities

    Science.gov (United States)

    Bob Smith; Philip A. Araman

    1997-01-01

    As sawmills search for new opportunities to add value to rough sawn lumber, many consider producing dimension parts as one solution. Assembling dimension parts into edge-glued panels or standard blanks can add even further value. Blanks are defined as pieces of solid wood (which may be edge-glued) that are manufactured to a predetermined size. This article discusses...

  6. Ion beam deposition system for depositing low defect density extreme ultraviolet mask blanks

    Science.gov (United States)

    Jindal, V.; Kearney, P.; Sohn, J.; Harris-Jones, J.; John, A.; Godwin, M.; Antohe, A.; Teki, R.; Ma, A.; Goodwin, F.; Weaver, A.; Teora, P.

    2012-03-01

    Extreme ultraviolet lithography (EUVL) is the leading next-generation lithography (NGL) technology to succeed optical lithography at the 22 nm node and beyond. EUVL requires a low defect density reflective mask blank, which is considered to be one of the top two critical technology gaps for commercialization of the technology. At the SEMATECH Mask Blank Development Center (MBDC), research on defect reduction in EUV mask blanks is being pursued using the Veeco Nexus deposition tool. The defect performance of this tool is one of the factors limiting the availability of defect-free EUVL mask blanks. SEMATECH identified the key components in the ion beam deposition system that is currently impeding the reduction of defect density and the yield of EUV mask blanks. SEMATECH's current research is focused on in-house tool components to reduce their contributions to mask blank defects. SEMATECH is also working closely with the supplier to incorporate this learning into a next-generation deposition tool. This paper will describe requirements for the next-generation tool that are essential to realize low defect density EUV mask blanks. The goal of our work is to enable model-based predictions of defect performance and defect improvement for targeted process improvement and component learning to feed into the new deposition tool design. This paper will also highlight the defect reduction resulting from process improvements and the restrictions inherent in the current tool geometry and components that are an impediment to meeting HVM quality EUV mask blanks will be outlined.

  7. Tailored reflectors for illumination.

    Science.gov (United States)

    Jenkins, D; Winston, R

    1996-04-01

    We report on tailored reflector design methods that allow the placement of general illumination patterns onto a target plane. The use of a new integral design method based on the edge-ray principle of nonimaging optics gives much more compact reflector shapes by eliminating the need for a gap between the source and the reflector profile. In addition, the reflectivity of the reflector is incorporated as a design parameter. We show the performance of design for constant irradiance on a distant plane, and we show how a leading-edge-ray method may be used to achieve general illumination patterns on nearby targets.

  8. Low-defect reflective mask blanks for extreme ultraviolet lithography

    International Nuclear Information System (INIS)

    Burkhart, S C; Cerjarn, C; Kearney, P; Mirkarimi, P; Ray-Chaudhuri, A; Walton, C.

    1999-01-01

    Extreme Ultraviolet Lithgraphy (EUVL) is an emerging technology for fabrication of sub-100 nm feature sizes on silicon, following the SIA road map well into the 21st century. The specific EUVL system described is a scanned, projection lithography system with a 4:1 reduction, using a laser plasma EUV source. The mask and all of the system optics are reflective, multilayer mirrors which function in the extreme ultraviolet at 13.4 nm wavelength. Since the masks are imaged to the wafer exposure plane, mask defects greater than 80% of the exposure plane CD (for 4:1 reduction) will in many cases render the mask useless, whereas intervening optics can have defects which are not a printing problem. For the 100 nm node, we must reduce defects to less than 0.01/cm ampersand sup2; at sign 80nm or larger to obtain acceptable mask production yields. We have succeeded in reducing the defects to less than 0.1/cm ampersand sup2; for defects larger than 130 nm detected by visible light inspection tools, however our program goal is to achieve 0.01/cm ampersand sup2; in the near future. More importantly though, we plan to have a detailed understanding of defect origination and the effect on multilayer growth in order to mitigate defects below the 10 -2 /cm ampersand sup2; level on the next generation of mask blank deposition systems. In this paper we will discuss issues and results from the ion-beam multilayer deposition tool, details of the defect detection and characterization facility, and progress on defect printability modeling

  9. Tailored Random Graph Ensembles

    International Nuclear Information System (INIS)

    Roberts, E S; Annibale, A; Coolen, A C C

    2013-01-01

    Tailored graph ensembles are a developing bridge between biological networks and statistical mechanics. The aim is to use this concept to generate a suite of rigorous tools that can be used to quantify and compare the topology of cellular signalling networks, such as protein-protein interaction networks and gene regulation networks. We calculate exact and explicit formulae for the leading orders in the system size of the Shannon entropies of random graph ensembles constrained with degree distribution and degree-degree correlation. We also construct an ergodic detailed balance Markov chain with non-trivial acceptance probabilities which converges to a strictly uniform measure and is based on edge swaps that conserve all degrees. The acceptance probabilities can be generalized to define Markov chains that target any alternative desired measure on the space of directed or undirected graphs, in order to generate graphs with more sophisticated topological features.

  10. Feasibility of tailoring of press formed thermoplastic composite parts

    Science.gov (United States)

    Sinke, J.

    2018-05-01

    The Tailor Made Blank concept is widely accepted in the production of sheet metal parts. By joining, adding and subtracting materials, and sometimes even applying different alloys, parts can be produced more efficiently by cost and/or weight, and new design options have been discovered. This paper is about the manufacture of press formed parts of Fibre Reinforced Thermoplastics and the evaluation whether the Tailoring concept, though adapted to the material behavior of FRTP, can be applied to these composites as well. From research, the first results and ideas are presented. One of the ideas is the multistep forming process, creating parts with thickness variations and combinations of fibre orientations that are usually not feasible using common press forming strategies. Another idea is the blending of different prepreg materials in one component. This might be useful in case of specific details, like for areas of mechanical fastening or to avoid carbon/metal contact, otherwise resulting in severe corrosion. In a brief overview, future perspectives of the potential of the Tailoring concept are presented.

  11. Three-dimensional characterization of extreme ultraviolet mask blank defects by interference contrast photoemission electron microscopy.

    Science.gov (United States)

    Lin, Jingquan; Weber, Nils; Escher, Matthias; Maul, Jochen; Han, Hak-Seung; Merkel, Michael; Wurm, Stefan; Schönhense, Gerd; Kleineberg, Ulf

    2008-09-29

    A photoemission electron microscope based on a new contrast mechanism "interference contrast" is applied to characterize extreme ultraviolet lithography mask blank defects. Inspection results show that positioning of interference destructive condition (node of standing wave field) on surface of multilayer in the local region of a phase defect is necessary to obtain best visibility of the defect on mask blank. A comparative experiment reveals superiority of the interference contrast photoemission electron microscope (Extreme UV illumination) over a topographic contrast one (UV illumination with Hg discharge lamp) in detecting extreme ultraviolet mask blank phase defects. A depth-resolved detection of a mask blank defect, either by measuring anti-node peak shift in the EUV-PEEM image under varying inspection wavelength condition or by counting interference fringes with a fixed illumination wavelength, is discussed.

  12. Die rol van die blanke werker in die motivering van die swart werker

    Directory of Open Access Journals (Sweden)

    G. J. Oosthuizen

    1980-11-01

    Opsomming Die motivering van die Swart werker kan nie in die huidige situasie in isolasie bestudeer word nie, omdat die Blanke werker steeds in die bestuursposisie is en daarom die motivering van die Swart werker kan beïnvloed. Hierdie ondersoek was daarop gerig om die rol van die Blanke werker in die motivering van die Swart werker nader te ondersoek. Die houding en die leierskapsbenadering van die Blanke werker teenoor die Swart werker is gemeet, asook die behoeftes wat volgens die Blanke werker by die Swart werker bestaan, bevredig is, of nie bestaan nie. Die behoeftes van Swart werkers, soos deur hulleself gesien, is ook ondersoek. Ten opsigte van sekere aspekte is beduidende verskille gevind.

  13. Attenuated phase-shift mask (PSM) blanks for flat panel display

    Science.gov (United States)

    Kageyama, Kagehiro; Mochizuki, Satoru; Yamakawa, Hiroyuki; Uchida, Shigeru

    2015-10-01

    The fine pattern exposure techniques are required for Flat Panel display applications as smart phone, tablet PC recently. The attenuated phase shift masks (PSM) are being used for ArF and KrF photomask lithography technique for high end pattern Semiconductor applications. We developed CrOx based large size PSM blanks that has good uniformity on optical characteristics for FPD applications. We report the basic optical characteristics and uniformity, stability data of large sized CrOx PSM blanks.

  14. The information gained from witnesses' responses to an initial "blank" lineup.

    Science.gov (United States)

    Palmer, Matthew A; Brewer, Neil; Weber, Nathan

    2012-10-01

    Wells ("The psychology of lineup identifications," Journal of Applied Social Psychology, 1984, 14, 89-103) proposed that a blank lineup (an initial lineup of known-to-be-innocent foils) can be used to screen eyewitnesses; witnesses who chose from a blank lineup (initial choosers) were more likely to make an error on a second lineup that contained a suspect than were witnesses who rejected a blank lineup (initial nonchoosers). Recent technological advances (e.g., computer-administered lineups) may overcome many of the practical difficulties cited as a barrier to the use of blank lineups. Our research extended knowledge about the blank lineup procedure by investigating the underlying causes of the difference in identification performance between initial choosers and initial nonchoosers. Studies 1a and 1b (total, N = 303) demonstrated that initial choosers were more likely to reject a second lineup than initial nonchoosers and witnesses who did not view a blank lineup, implying that cognitive biases (e.g., confirmation bias and commitment effects) influenced initial choosers' identification decisions. In Study 2 (N = 200), responses on a forced-choice identification test provided evidence that initial choosers have, on average, poorer memories for the culprit than do initial nonchoosers. We also investigated the usefulness of blank lineups for interpreting identification evidence. Diagnosticity ratios suggested that suspect identifications made by initial nonchoosers (cf. initial choosers) should have a greater impact on estimates of the likely guilt of the suspect. Furthermore, for initial nonchoosers, higher confidence in blank lineup rejections was associated with higher diagnosticity for subsequent suspect identifications. These results have implications for policy to guide the collection and interpretation of identification evidence. PsycINFO Database Record (c) 2012 APA, all rights reserved.

  15. When the Ostrich-Algorithm Fails: Blanking Method Affects Spike Train Statistics

    Directory of Open Access Journals (Sweden)

    Kevin Joseph

    2018-04-01

    Full Text Available Modern electroceuticals are bound to employ the usage of electrical high frequency (130–180 Hz stimulation carried out under closed loop control, most prominent in the case of movement disorders. However, particular challenges are faced when electrical recordings of neuronal tissue are carried out during high frequency electrical stimulation, both in-vivo and in-vitro. This stimulation produces undesired artifacts and can render the recorded signal only partially useful. The extent of these artifacts is often reduced by temporarily grounding the recording input during stimulation pulses. In the following study, we quantify the effects of this method, “blanking,” on the spike count and spike train statistics. Starting from a theoretical standpoint, we calculate a loss in the absolute number of action potentials, depending on: width of the blanking window, frequency of stimulation, and intrinsic neuronal activity. These calculations were then corroborated by actual high signal to noise ratio (SNR single cell recordings. We state that, for clinically relevant frequencies of 130 Hz (used for movement disorders and realistic blanking windows of 2 ms, up to 27% of actual existing spikes are lost. We strongly advice cautioned use of the blanking method when spike rate quantification is attempted.Impact statementBlanking (artifact removal by temporarily grounding input, depending on recording parameters, can lead to significant spike loss. Very careful use of blanking circuits is advised.

  16. When the Ostrich-Algorithm Fails: Blanking Method Affects Spike Train Statistics.

    Science.gov (United States)

    Joseph, Kevin; Mottaghi, Soheil; Christ, Olaf; Feuerstein, Thomas J; Hofmann, Ulrich G

    2018-01-01

    Modern electroceuticals are bound to employ the usage of electrical high frequency (130-180 Hz) stimulation carried out under closed loop control, most prominent in the case of movement disorders. However, particular challenges are faced when electrical recordings of neuronal tissue are carried out during high frequency electrical stimulation, both in-vivo and in-vitro . This stimulation produces undesired artifacts and can render the recorded signal only partially useful. The extent of these artifacts is often reduced by temporarily grounding the recording input during stimulation pulses. In the following study, we quantify the effects of this method, "blanking," on the spike count and spike train statistics. Starting from a theoretical standpoint, we calculate a loss in the absolute number of action potentials, depending on: width of the blanking window, frequency of stimulation, and intrinsic neuronal activity. These calculations were then corroborated by actual high signal to noise ratio (SNR) single cell recordings. We state that, for clinically relevant frequencies of 130 Hz (used for movement disorders) and realistic blanking windows of 2 ms, up to 27% of actual existing spikes are lost. We strongly advice cautioned use of the blanking method when spike rate quantification is attempted. Blanking (artifact removal by temporarily grounding input), depending on recording parameters, can lead to significant spike loss. Very careful use of blanking circuits is advised.

  17. Wear of different PVD coatings at industrial fine-blanking field tests

    Directory of Open Access Journals (Sweden)

    Liina Lind

    2015-09-01

    Full Text Available Thin hard physical vapor deposited (PVD coatings play significant role on wear performance of fine-blanking punches in the presence of extremely high contact stresses. Nevertheless it seems that in blanking or fine-blanking the coatings are selected based on coincidence, trial-error-method or latest trends. There is limited information about planning and conducting the fine-blanking industrial field tests and measuring the wear of different coatings. In the present study a set of fine-blanking punches and laboratory specimens were prepared with three coatings – TiCN, nACRo and nACo. As substrate material Böhler S390 Microclean high speed steel was used. Coating mechanical properties (modulus of elasticity and nanohardness were measured and wear rate with alumina ball was determined using the reciprocating sliding test. Wear of coatings was measured from punches after industrial use. All of the tested coatings showed high variance of wear. However coatings nACo and nACRo have better average wear resistance in fine-blanking compared with the well-known TiCN. Industrial field tests show correlation to the ratio elastic strain to failure H/E.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7249

  18. High-speed blanking of copper alloy sheets: Material modeling and simulation

    Science.gov (United States)

    Husson, Ch.; Ahzi, S.; Daridon, L.

    2006-08-01

    To optimize the blanking process of thin copper sheets ( ≈ 1. mm thickness), it is necessary to study the influence of the process parameters such as the punch-die clearance and the wear of the punch and the die. For high stroke rates, the strain rate developed in the work-piece can be very high. Therefore, the material modeling must include the dynamic effects.For the modeling part, we propose an elastic-viscoplastic material model combined with a non-linear isotropic damage evolution law based on the theory of the continuum damage mechanics. Our proposed modeling is valid for a wide range of strain rates and temperatures. Finite Element simulations, using the commercial code ABAQUS/Explicit, of the blanking process are then conducted and the results are compared to the experimental investigations. The predicted cut edge of the blanked part and the punch-force displacement curves are discussed as function of the process parameters. The evolution of the shape errors (roll-over depth, fracture depth, shearing depth, and burr formation) as function of the punch-die clearance, the punch and the die wear, and the contact punch/die/blank-holder are presented. A discussion on the different stages of the blanking process as function of the processing parameters is given. The predicted results of the blanking dependence on strain-rate and temperature using our modeling are presented (for the plasticity and damage). The comparison our model results with the experimental ones shows a good agreement.

  19. Production of the 4.1-m Zerodur mirror blank for the VISTA Telescope

    Science.gov (United States)

    Doehring, Thorsten; Jedamzik, Ralf; Wittmer, Volker; Thomas, Armin

    2004-09-01

    VISTA (Visible and Infrared Survey Telescope for Astronomy) is designed to be the world's largest wide field telescope. After finishing of the construction the telescope will be part of ESO and located in Chile close to the VLT observatory at Cerro Paranal. In November 2001 SCHOTT was selected by the VISTA project office at the Royal Observatory of Edinburgh to deliver the 4.1 m diameter primary mirror blank. The manufacturing of the mirror blank made from the zero expansion material Zerodur was challenging especially due to the f/1 design. Several tons of the glass ceramic material were removed during the grinding operation. A meniscus blank with a diameter of 4100 mm and a thickness of 171.5 mm was generated, having a large central hole of 1200 mm and an aspherical shape of the concave surface. Also the handling and turning operations needed special effort and were performed by a skilled team. This paper presents details and pictures of the corresponding production and inspection sequence at SCHOTT. The geometrical parameters were measured during manufacturing by help of a laser tracker system and the achieved parameters were compared with the initial technical specification. The final quality inspection verified the excellent quality of the mirror blank. The close co-operation between the astronomers and industry resulted in a project management without problems. In April 2003 the VISTA blank was delivered successfully within a ceremony dedicated to the anniversary of "100 years of astronomical mirror blanks from SCHOTT."

  20. Finite element analysis of the combined fine blanking and extrusion process

    Science.gov (United States)

    Zheng, Peng-Fei

    The combined fine blanking and extrusion process is such a metal forming process that fine blanking and forward extrusion are carried out on sheet metal material at the same time. There are two typical characteristics in this process, one is the fine blanking whose deformation mechanism is different from conventional blanking; the other is the sheet metal extrusion, which is different from the conventional extrusion. Even though fine blanking has been used in industry for many years, only limited literature can be found which deals with the theoretical analysis of it. On the other hand, no publications on the theoretical analysis of the sheet metal extrusion have been found. Intensive work should be carried out to reveal the mechanism of both fine blanking process and sheet metal extrusion process, and further the combined fine blanking and extrusion process. The scope of this thesis is to study the mechanics of fine blanking, sheet metal extrusion, and combined fine blanking and extrusion process one by one with the rigid-plastic finite element method. All of above processes are typical unsteady ones, especially the fine blanking process in which extremely severe and localized deformation occurs. Therefore, commercial programs can not be used to solve these problems up till now. Owing to this reason, a rigid-plastic finite element program was developed for simulating these processes where remeshing and mesh tracing techniques as well as the golden section method were adopted according to the characteristics of these processes in this thesis. Moreover, a permissible kinematic velocity field was adopted as the initial velocity field for simulating extrusion process successfully. Results from the simulation included the distorted mesh, the field of material flow, the stress and the strain distributions at various moments of deformation. Results under different deformation conditions such as different blanking clearances, different diameters of the extrusion punch and

  1. On the Determination of the Blank Shape Contour for Thin Precision Parts Obtained by Stamping

    International Nuclear Information System (INIS)

    Azaouzi, M.; Delameziere, A.; Naceur, H.; Batoz, J. L.; Sibaud, D.; Belouettar, S.

    2007-01-01

    The present study deals with the 'automatic' determination of the initial blank shape contour for 3D thin metallic precision parts obtained by stamping, knowing the 3D CAD geometry of the final part (the desired product). The forming process can involve several steps presented in this paper that consists in applying a heuristic method of optimization to find out the initial blank shape of thin precision metallic part in order to obtain a final part, with a required 3D geometry (specified). The purpose of the present approach is to replace the experimental trial and error optimization method used currently, which is expensive and time consuming. The principle of the 'heuristic' optimization method is to first estimate the blank shape using the Inverse Approach, then to compensate the shape error calculated in each node of the blank contour. The 'heuristic' optimization loop is done using a precise incremental code (Abaqus Explicit or Stampack) and, the iterations loop is stopped when the shape errors are within some initially fixed tolerances. The method is tested in the case of a special stamping process where the parts are pressed in one or more steps using a manual press, without blank holder and by the mean of tools having complex shape. The sensitivities of the process parameters regarding the optimal solution are investigated

  2. Investigation into high-frequency-vibration assisted micro-blanking of pure copper foils

    Directory of Open Access Journals (Sweden)

    Wang Chunju

    2015-01-01

    Full Text Available The difficulties encountered during the manufacture of microparts are often associated with size effects relating to material, process and tooling. Utilizing acoustoplastic softening, achieved through a high-frequency vibration assisted micro-blanking process, was introduced to improve the surface finish in micro-blanking. A frequency of 1.0 kHz was chosen to activate the longitudinal vibration mode of the horn tip, using a piezoelectric actuator. A square hole with dimensions of 0.5 mm × 0.5 mm was made, successfully, from a commercial rolled T2 copper foil with 100 μm in thickness. It was found that the maximum blanking force could be reduced by 5% through utilizing the high-frequency vibration. Proportion of the smooth, burnished area in the cut cross-section increases with an increase of the plasticity to fracture, under the high-frequency vibration, which suggests that the vibration introduced is helpful for inhibiting evolution of the crack due to its acoustoplastic softening effect. During blanking, roughness of the burnished surface could be reduced by increasing the vibration amplitude of the punch, which played a role as surface polishing. The results obtained suggest that the high-frequency vibration can be adopted in micro-blanking in order to improve quality of the microparts.

  3. Failure Analysis of a Sheet Metal Blanking Process Based on Damage Coupling Model

    Science.gov (United States)

    Wen, Y.; Chen, Z. H.; Zang, Y.

    2013-11-01

    In this paper, a blanking process of sheet metal is studied by the methods of numerical simulation and experimental observation. The effects of varying technological parameters related to the quality of products are investigated. An elastoplastic constitutive equation accounting for isotropic ductile damage is implemented into the finite element code ABAQUS with a user-defined material subroutine UMAT. The simulations of the damage evolution and ductile fracture in a sheet metal blanking process have been carried out by the FEM. In order to guarantee computation accuracy and avoid numerical divergence during large plastic deformation, a specified remeshing technique is successively applied when severe element distortion occurs. In the simulation, the evolutions of damage at different stage of the blanking process have been evaluated and the distributions of damage obtained from simulation are in proper agreement with the experimental results.

  4. Tool life equation for blanking 18-8 stainless steel strips

    International Nuclear Information System (INIS)

    Faura, F.; Lopez, J.; Sanes, J.; Garcia, A.

    1998-01-01

    Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm). Frostily it has analyzed the different studies that have previously dealt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. to this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these test were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20% of the work material thickness. (Author) 8 refs

  5. The patient's safety - For a dynamics of improvement. Nr 2. The 'blank' first session

    International Nuclear Information System (INIS)

    2011-11-01

    This publication addresses the stakes associated with the first radiotherapy session which is commonly called the 'blank' session. After some figures concerning radiotherapy patients and event declarations, it analyses 13 of these events in terms of number of sessions, location, treatment technique, and error detection (when, by whom). It evokes the consequences of events, and identifies the main causes of these events (positioning controls, work organisation, technical tools and devices). It outlines some good practices: a systematic 'blank' first session before any radiotherapy, a rigorous control of positioning, avoidance of patient repositioning errors. Some innovative techniques of imagery-guided radiotherapy are evoked. Members of radiotherapy departments outline the importance of this first 'blank' session, their own role, and successful practices

  6. High speed phototimer and biplane II blanking method in 105 mm RSC photographing of circulatory system

    International Nuclear Information System (INIS)

    Kaga, Yuji; Kiuchi, Shigeo; Sato, Masami; Komatsuda, Yasushi; Nishio, Kosaku.

    1979-01-01

    A high speed phototimer as an autoexposure mechanism was developed for 105 mm II indirect continuous photographing of circulatory system. The phototimer can give repeated response of 12 times/sec and the shortest X-ray shut out of 1 m sec. The proper lighting field for the phototimer is 7 mm diameter (12%) of the II input area, equivalent to 80 mm in diameter), and the tube voltage, object property and the focus-II distance characteristics are all well corrected to give good photographs of optimal density. The mutual fog in biplane photographing can be removed by adopting II blanking method. As blanking can respond quite rapidly, photographing time plus 2 m sec is enough for blanking time. That means the positive phase can be brought close to 3 m sec. This mechanism can be applied for biplane cine-photographing. (Kobatake, H.)

  7. Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

    International Nuclear Information System (INIS)

    Chen, W.; Zhang, Y.Z.; Zhang, C.J.; Zhu, L.G.; Lu, W.G.; Wang, B.X.; Ma, J.H.

    2009-01-01

    The objective of this work is to optimize the process parameters of beam blank continuous casting in order to ensure high quality and productivity. A transient thermo-mechanical finite element model is developed to compute the temperature and stress profile in beam blank continuous casting. By comparing the calculated data with the metallurgical constraints, the key factors causing defects of beam blank can be found out. Then based on the subproblem approximation method, an optimization program is developed to search out the optimum cooling parameters. Those optimum parameters can make it possible to run the caster at its maximum productivity, minimum cost and to reduce the defects. Now, online verifying of this optimization project has been put in practice, which can prove that it is very useful to control the actual production

  8. Experimental verification of a deep drawing tool system for adaptive blank holder pressure distribution

    DEFF Research Database (Denmark)

    Tommerup, Søren; Endelt, Benny Ørtoft

    2012-01-01

    In deep drawing, the strain path in the blank during the forming process can be significantly affected by application of temporal and spatial variation of the blank holder force. In this study, an active tool system capable of controlling the distribution of the blank holder force is presented...... which can be integrated into existing stacked deep drawing tools without need for modification of the press. A working system is presented consisting of a controller, designated volume displacement cavity pressure supply units and a shimming plate. It is applied to the deep drawing of a rectangular...... to the conventional shimming method using paper or metal shims between the tool plates. The tool system’s ability to influence the material flow is investigated by performing a series of deep drawing experiments. Eight different cavity pressure schemes are applied during the punch stroke and the scheme’s effects...

  9. Lithographic qualification of high-transmission mask blank for 10nm node and beyond

    Science.gov (United States)

    Xu, Yongan; Faure, Tom; Viswanathan, Ramya; Lobb, Granger; Wistrom, Richard; Burns, Sean; Hu, Lin; Graur, Ioana; Bleiman, Ben; Fischer, Dan; Mignot, Yann; Sakamoto, Yoshifumi; Toda, Yusuke; Bolton, John; Bailey, Todd; Felix, Nelson; Arnold, John; Colburn, Matthew

    2016-04-01

    In this paper, we discuss the lithographic qualification of high transmission (High T) mask for Via and contact hole applications in 10nm node and beyond. First, the simulated MEEF and depth of focus (DoF) data are compared between the 6% and High T attnPSM masks with the transmission of High T mask blank varying from 12% to 20%. The 12% High T blank shows significantly better MEEF and larger DoF than those of 6% attnPSM mask blank, which are consistent with our wafer data. However, the simulations show no obvious advantage in MEEF and DoF when the blank transmittance is larger than 12%. From our wafer data, it has been seen that the common process window from High T mask is 40nm bigger than that from the 6% attnPSM mask. In the elongated bar structure with smaller aspect ratio, 1.26, the 12% High T mask shows significantly less develop CD pull back in the major direction. Compared to the High T mask, the optimized new illumination condition for 6% attnPSM shows limited improvement in MEEF and the DoF through pitch. In addition, by using the High T mask blank, we have also investigated the SRAF printing, side lobe printing and the resist profile through cross sections, and no patterning risk has been found for manufacturing. As part of this work new 12% High T mask blank materials and processes were developed, and a brief overview of key mask technology development results have been shared. Overall, it is concluded that the High T mask, 12% transmission, provides the most robust and extendable lithographic solution for 10nm node and beyond.

  10. Increasing the Deep Drawability of Al-1050 Aluminum Sheet using Multi-Point Blank Holder

    Directory of Open Access Journals (Sweden)

    Gavas, M.

    2006-01-01

    Full Text Available Aluminum alloys have been widely used in the fields of automobile and aerospace industries. Due to their bad cold-formability in deep drawing, a lot of forming methods have been implemented to increase the drawing height and the limiting drawing rate (LDR. The conventional deep drawing process is limited to a certain limit drawing ratio beyond which failure will ensue. The purpose of this experimental study is to examine the possibilities of increasing this limitation using the multi-point blank holder. The results from the experiments showed that the multi-point blank holder is effective way to promote deep drawability of Al-1050 sheet.

  11. Mercury Deposition Network Site Operator Training for the System Blank and Blind Audit Programs

    Science.gov (United States)

    Wetherbee, Gregory A.; Lehmann, Christopher M.B.

    2008-01-01

    The U.S. Geological Survey operates the external quality assurance project for the National Atmospheric Deposition Program/Mercury Deposition Network. The project includes the system blank and blind audit programs for assessment of total mercury concentration data quality for wet-deposition samples. This presentation was prepared to train new site operators and to refresh experienced site operators to successfully process and submit system blank and blind audit samples for chemical analysis. Analytical results are used to estimate chemical stability and contamination levels of National Atmospheric Deposition Program/Mercury Deposition Network samples and to evaluate laboratory variability and bias.

  12. n Vergelykende ondersoek na die werksmotivering van blanke en swart vakmanne in 'n chemiese bedryf

    Directory of Open Access Journals (Sweden)

    A. L. Barnard

    1991-06-01

    Opsomming Die doel met hierdie ondersoek was om met behulp van Lawler en Porter se verwagtingsmodel, vas te stel in watter mate blanke en swart vakmanne, in 'n chemiese nywerheid, hul werksomgewing as toereikend motiverend van aard beskou. Die resultate dui aan dat daar vir beide groepe nie sprake is van 'n optimaal motiverende werksomgewing nie. Terwyl blanke vakmanne ekstrinsieke faktore meer beklemtoon het, het swart vakmanne beter gebalanseerde voorkeure met betrekking tot ekstrinsieke/intrinsieke faktore getoon. Die motiveringspatrone van die twee groepe het egter nie wesenlik van mekaar verskil nie.

  13. High Speed Blanking: An Experimental Method to Measure Induced Cutting Forces

    OpenAIRE

    GAUDILLIERE , Camille; Ranc , Nicolas; LARUE , Arnaud; MAILLARD , A; Lorong , Philippe

    2013-01-01

    Lien vers la version éditeur: http://link.springer.com/article/10.1007/s11340-013-9738-1; International audience; A new blanking process that involves punch speed up to 10 ms −1 has obvious advantages in increased productivity. However, the inherent dynamics of such a process makes it difficult to develop a practical high speed punch press. The fracture phenomenon governing the blanking process has to be well understood to correctly design the machine support and the tooling. To observe this ...

  14. Blank evaluation in nitrogen determination in seed grains by 14 MeV neutron activation analysis

    International Nuclear Information System (INIS)

    Wasek, M.; Sterlinski, S.

    1987-01-01

    In this work the term 'blank' signifies total radiation of the sample analyzed except that the element to be determined (analyte) is absent. On the basis of the evaluation of the blank components (nuclear and spectral interferences, air-nitrogen between grains, etc.), a semiempirical formula for calculating the nitrogen content in plant grain samples is proposed. The reliability of the results obtained with the use of this formula was demonstrated for five sorts of seeds (rye, wheat, barley, broad bean and soybean) which were analyzed by the Kjeldahl method and 14 MeV neutron activation analysis, respectively. (author)

  15. Attentional Lapses in Attention-Deficit/Hyperactivity Disorder: Blank Rather Than Wandering Thoughts.

    Science.gov (United States)

    Van den Driessche, Charlotte; Bastian, Mikaël; Peyre, Hugo; Stordeur, Coline; Acquaviva, Éric; Bahadori, Sara; Delorme, Richard; Sackur, Jérôme

    2017-10-01

    People with attention-deficit/hyperactivity disorder (ADHD) have difficulties sustaining their attention on external tasks. Such attentional lapses have often been characterized as the simple opposite of external sustained attention, but the different types of attentional lapses, and the subjective experiences to which they correspond, remain unspecified. In this study, we showed that unmedicated children (ages 6-12) with ADHD, when probed during a standard go/no-go task, reported more mind blanking (a mental state characterized by the absence of reportable content) than did control participants. This increase in mind blanking happened at the expense of both focused and wandering thoughts. We also found that methylphenidate reverted the level of mind blanking to baseline (i.e., the level of mind blanking reported by control children without ADHD). However, this restoration led to mind wandering more than to focused attention. In a second experiment, we extended these findings to adults who had subclinical ADHD. These results suggest that executive functions impaired in ADHD are required not only to sustain external attention but also to maintain an internal train of thought.

  16. Comparison of two analytical models of blanking and proposal of a new model

    NARCIS (Netherlands)

    Klingenberg, W; Singh, UP

    With the development of accurate Finite Element models of the punching/blanking process by the present authors and other researchers, important possibilities emerged to model and analyse the process in a research environment. However, Finite Element models are less well suited for use in a

  17. Some Data Concerning the Vocational Preference Inventory Scales and the Strong Vocational Interest Blank

    Science.gov (United States)

    Cockriel, Irvin W.

    1972-01-01

    Occupational scales of the Vocational Preference Inventory were correlated with the Basic Interest scales of the Strong Vocational Interest Blank. The 285 subjects were women freshmen in a College of Education. The results indicate that the scales are not highly correlated. (Author)

  18. A big blank white canvas? Mapping and modeling human impact in Antarctica

    Science.gov (United States)

    Steve Carver; Tina Tin

    2015-01-01

    Antarctica is certainly what most people would consider being the world's last great wilderness; largely untouched and undeveloped by humans. Yet it is not inviolate - there are scientific bases, tourist operations, expeditions, airstrips and even roads. Although these impacts are by and large limited in extent, their very presence in an otherwise "blank...

  19. Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils

    International Nuclear Information System (INIS)

    Hildering, Sven; Engel, Ulf; Merklein, Marion

    2011-01-01

    The trend towards miniaturisation of metallic mass production components combined with increased component functionality is still unbroken. Manufacturing these components by forming and blanking offers economical and ecological advantages combined with the needed accuracy. The complexity of producing tools with geometries below 50 μm by conventional manufacturing methods becomes disproportional higher. Expensive serial finishing operations are required to achieve an adequate surface roughness combined with accurate geometry details. A novel approach for producing such tools is the use of advanced etching technologies for monocrystalline silicon that are well-established in the microsystems technology. High-precision vertical geometries with a width down to 5 μm are possible. The present study shows a novel concept using this potential for the blanking of thin copper foils with monocrystallline silicon as a tool material. A self-contained machine-tool with compact outer dimensions was designed to avoid tensile stresses in the brittle silicon punch by an accurate, careful alignment of the punch, die and metal foil. A microscopic analysis of the monocrystalline silicon punch shows appropriate properties regarding flank angle, edge geometry and surface quality for the blanking process. Using a monocrystalline silicon punch with a width of 70 μm blanking experiments on as-rolled copper foils with a thickness of 20 μm demonstrate the general applicability of this material for micro production processes.

  20. Mohelno – A terminal Last Glacial Maximum industry with microlithic tools made on carenoidal blanks

    Czech Academy of Sciences Publication Activity Database

    Škrdla, Petr; Nejman, L.; Bartík, J.; Rychtaříková, Tereza; Nikolajev, Pavel; Eigner, J.; Nývltová Fišáková, Miriam; Novák, J.; Polanská, M.

    2016-01-01

    Roč. 406, 25 June 2016 (2016), s. 184-194 ISSN 1040-6182 R&D Projects: GA ČR GA15-19170S Keywords : Moravia * Mohelno * Epi-Gravettian * Epi-Aurignacian * Microlithic tools * Carenoidal blanks Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 2.199, year: 2016

  1. IDMS analysis of blank swipe samples for uranium quantity and isotopic composition

    International Nuclear Information System (INIS)

    Ryjinski, M.; Donohue, D.

    2001-01-01

    Since 1996 the IAEA has started routine implementation of environmental sampling. During the last 5 years more than 1700 swipe samples were collected and analyzed in the Network of Analytical Laboratories (NWAL). One sensitive point of analyzing environmental samples is evidence of the presence of enriched U. The U content on swipes is extremely low and therefore there is a relatively high probability of a false positive, e.g. small contamination or a measurement bias. In order to avoid and/or control this the IAEA systematically sends to the laboratories blind blank QC samples. In particular more than 50 blank samples were analyzed during the last two years. A preliminary analysis of blank swipes showed the swipe material itself contains up to 10 ng of NU per swipe. However, about 50% of blind blank swipes analyzed show the presence of enriched uranium. A source of this bias has to be clarified and excluded. This paper presents the results of modeling of IDMS analysis for quantity and isotopic composition of uranium in order to identify the possible contribution of different factors to the final measurement uncertainty. This modeling was carried out based on the IAEA Clean Laboratory measurement data and simulation technique

  2. Fill in the Blank: Culture Jamming and the Advertising of Agency

    Science.gov (United States)

    Lambert-Beatty, Carrie

    2010-01-01

    This article is a review on billboard liberation and some other projects that develop the idea of talking back or over advertising in a playful and youthful way. In one of them, Ji Lee's Bubble Project, an artist places blank thought-bubble stickers on street advertisements and waits to see what people write on them, completing the work of art and…

  3. Theoretical Analysis on Mechanical Deformation of Membrane-Based Photomask Blanks

    Science.gov (United States)

    Marumoto, Kenji; Aya, Sunao; Yabe, Hedeki; Okada, Tatsunori; Sumitani, Hiroaki

    2012-04-01

    Membrane-based photomask is used in proximity X-ray lithography including that in LIGA (Lithographie, Galvanoformung und Abformung) process, and near-field photolithography. In this article, out-of-plane deformation (OPD) and in-plane displacement (IPD) of membrane-based photomask blanks are theoretically analyzed to obtain the mask blanks with flat front surface and low stress absorber film. First, we derived the equations of OPD and IPD for the processing steps of membrane-based photomask such as film deposition, back-etching and bonding, using a theory of symmetrical bending of circular plates with a coaxial circular hole and that of deformation of cylinder under hydrostatic pressure. The validity of the equations was proved by comparing the calculation results with experimental ones. Using these equations, we investigated the relation between the geometry of the mask blanks and the distortions generally, and gave the criterion to attain the flat front surface. Moreover, the absorber stress-bias required to obtain zero-stress on finished mask blanks was also calculated and it has been found that only little stress-bias was required for adequate hole size of support plate.

  4. Neonates need tailored drug formulations.

    Science.gov (United States)

    Allegaert, Karel

    2013-02-08

    Drugs are very strong tools used to improve outcome in neonates. Despite this fact and in contrast to tailored perfusion equipment, incubators or ventilators for neonates, we still commonly use drug formulations initially developed for adults. We would like to make the point that drug formulations given to neonates need to be tailored for this age group. Besides the obvious need to search for active compounds that take the pathophysiology of the newborn into account, this includes the dosage and formulation. The dosage or concentration should facilitate the administration of low amounts and be flexible since clearance is lower in neonates with additional extensive between-individual variability. Formulations need to be tailored for dosage variability in the low ranges and also to the clinical characteristics of neonates. A specific focus of interest during neonatal drug development therefore is a need to quantify and limit excipient exposure based on the available knowledge of their safety or toxicity. Until such tailored vials and formulations become available, compounding practices for drug formulations in neonates should be evaluated to guarantee the correct dosing, product stability and safety.

  5. 47 CFR 73.646 - Telecommunications Service on the Vertical Blanking Interval and in the Visual Signal.

    Science.gov (United States)

    2010-10-01

    ... Blanking Interval and in the Visual Signal. 73.646 Section 73.646 Telecommunication FEDERAL COMMUNICATIONS... transmission of data, processed information, or any other communication in either a digital or analog mode. (b....646 Telecommunications Service on the Vertical Blanking Interval and in the Visual Signal. (a...

  6. 76 FR 14697 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Science.gov (United States)

    2011-03-17

    ... Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Revised Determination... workers of Aleris Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute... Blanking and Rim Products, Inc., a division of Aleris International, Inc., Terre Haute, Indiana, who became...

  7. Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter

    Directory of Open Access Journals (Sweden)

    Lacki P.

    2015-06-01

    Full Text Available Despite substantial demand for drawn parts made of high-strength sheet metal (including titanium alloys observed in the modern industry, particularly automotive and aviation, their application remains insignificant. This results from the fact that such sheet metal shows poor plasticity and its cold-forming is almost impossible. Low drawability makes it impossible to obtain even such simple shapes as spherical cups. The authors of this study developed circular sheet-metal blanks with cutouts on their perimeter. The blanks allow for cold forming of spherical cups from Ti6Al4V titanium alloy sheet metal using conventional rigid tools. The cutouts proposed in the study affect plastic strain distribution, which in turn leads to an increase in forming depth by about 30%. The numerical analysis, performed using the PamStamp 2G System software based on finite element method, was verified experimentally.

  8. Study on the process of calibration and deep centring of blanks

    International Nuclear Information System (INIS)

    Potapov, I.N.; Romantsev, B.A.; Popov, V.A.; Volodin, V.V.; Goncharuk, A.V.

    1985-01-01

    Process of calibration and deep centring of blanks before broaching is developed and studied. Investigations are performed at a semi-industrial screw rolling mill MISiS-100 T. Blanks made of 40Kh, 60, 50, 45KhN2MFA, 30KhGSNA steels 80, 85, and 90 mm in diameter and 300 mm long were calibrated and centered after heating in a furnace to a depth of 200 mm at shafts and faces with different calibration. 30KhN2MFA steel is chosen for face material; heat treatment is conducted under the following conditions: heating up to 950-1000 deg C and hold-up during 30-35 min with the following cooling in the air. The above experimental investigations reveal that the process of calibration and deep centring accomplished at a three-shaft screw rolling mill is rather stable and provides a high accuracy of centering hollow marking

  9. Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation

    Science.gov (United States)

    Schmidt, Hans Christian; Homberg, Werner; Orive, Alejandro Gonzalez; Grundmeier, Guido; Hordych, Illia; Maier, Hans Jürgen

    2018-05-01

    In this study the manufacture of aluminium-steel blanks by cold pressure welding and their preparation for a welding process through electrochemical surface treatment are investigated and discussed. The cold pressure welding process was done with an incremental rolling tool that allows for the partial pressure welding of two blanks along a prepared path. The influence of the surface preparation by electrochemical deposition of bond promoting organosilane-based agents and roughening on a nano-scale is investigated and compared to conventional surface treatments. Coating the surfaces with a thin organosilane-based film incorporating specific functional groups should promote additional bonding between the mating oxide layers; its influence on the total weld strength is studied. Pressure welding requires suitable process strategies, and the current advances in the proposed incremental rolling process for the combination of mild steel and aluminium are presented.

  10. Correction to the count-rate detection limit and sample/blank time-allocation methods

    International Nuclear Information System (INIS)

    Alvarez, Joseph L.

    2013-01-01

    A common form of count-rate detection limits contains a propagation of uncertainty error. This error originated in methods to minimize uncertainty in the subtraction of the blank counts from the gross sample counts by allocation of blank and sample counting times. Correct uncertainty propagation showed that the time allocation equations have no solution. This publication presents the correct form of count-rate detection limits. -- Highlights: •The paper demonstrated a proper method of propagating uncertainty of count rate differences. •The standard count-rate detection limits were in error. •Count-time allocation methods for minimum uncertainty were in error. •The paper presented the correct form of the count-rate detection limit. •The paper discussed the confusion between count-rate uncertainty and count uncertainty

  11. HEATING OF BLANK IN FORM OF PRISM IN ACCORDANCE WITH TECHNOLOGICAL LIMITATIONS

    Directory of Open Access Journals (Sweden)

    V. B. Kovalevsky

    2009-01-01

    Full Text Available The paper considers a problem on optimum heating control of a blank in the form of prism under complicated conditions of heat-transfer in accordance with criteria of gas consumption minimization, decarburized layer and scaling. Numerical algorithm of the problem solution and examples are given in the paper. A new technology of the flame furnace operation has been developed in the paper. 

  12. Development of high sensitivity and high speed large size blank inspection system LBIS

    Science.gov (United States)

    Ohara, Shinobu; Yoshida, Akinori; Hirai, Mitsuo; Kato, Takenori; Moriizumi, Koichi; Kusunose, Haruhiko

    2017-07-01

    The production of high-resolution flat panel displays (FPDs) for mobile phones today requires the use of high-quality large-size photomasks (LSPMs). Organic light emitting diode (OLED) displays use several transistors on each pixel for precise current control and, as such, the mask patterns for OLED displays are denser and finer than the patterns for the previous generation displays throughout the entire mask surface. It is therefore strongly demanded that mask patterns be produced with high fidelity and free of defect. To enable the production of a high quality LSPM in a short lead time, the manufacturers need a high-sensitivity high-speed mask blank inspection system that meets the requirement of advanced LSPMs. Lasertec has developed a large-size blank inspection system called LBIS, which achieves high sensitivity based on a laser-scattering technique. LBIS employs a high power laser as its inspection light source. LBIS's delivery optics, including a scanner and F-Theta scan lens, focus the light from the source linearly on the surface of the blank. Its specially-designed optics collect the light scattered by particles and defects generated during the manufacturing process, such as scratches, on the surface and guide it to photo multiplier tubes (PMTs) with high efficiency. Multiple PMTs are used on LBIS for the stable detection of scattered light, which may be distributed at various angles due to irregular shapes of defects. LBIS captures 0.3mμ PSL at a detection rate of over 99.5% with uniform sensitivity. Its inspection time is 20 minutes for a G8 blank and 35 minutes for G10. The differential interference contrast (DIC) microscope on the inspection head of LBIS captures high-contrast review images after inspection. The images are classified automatically.

  13. Tailoring Earned Value Management. General Guidelines

    National Research Council Canada - National Science Library

    2002-01-01

    Partial Contents: General Principles, A Spectrum of Implementation, OMB Guidance, A Special Note about DOD, Risk Factors to Consider, How can EVMS be tailored, Tailor EVMS to Inherent Risk, Application Thresholds-DoD...

  14. Time series with tailored nonlinearities

    Science.gov (United States)

    Räth, C.; Laut, I.

    2015-10-01

    It is demonstrated how to generate time series with tailored nonlinearities by inducing well-defined constraints on the Fourier phases. Correlations between the phase information of adjacent phases and (static and dynamic) measures of nonlinearities are established and their origin is explained. By applying a set of simple constraints on the phases of an originally linear and uncorrelated Gaussian time series, the observed scaling behavior of the intensity distribution of empirical time series can be reproduced. The power law character of the intensity distributions being typical for, e.g., turbulence and financial data can thus be explained in terms of phase correlations.

  15. Tailoring PKI for the battlespace

    Science.gov (United States)

    Covey, Carlin R.

    2003-07-01

    A Public Key Infrastructure (PKI) can provide useful communication protections for friendly forces in the battlespace. The PKI would be used in conjunction with communication facilities that are accorded physical and Type-1 cryptographic protections. The latter protections would safeguard the confidentiality and (optionally) the integrity of communications between enclaves of users, whereas the PKI protections would furnish identification, authentication, authorization and privacy services for individual users. However, Commercial-Off-the-Shelf (COTS) and most Government-Off-the-Shelf (GOTS) PKI solutions are not ideally tailored for the battlespace environment. Most PKI solutions assume a relatively static, high-bandwidth communication network, whereas communication links in the battlespace will be dynamically reconfigured and bandwidth-limited. Most enterprise-wide PKI systems assume that users will enroll and disenroll at an orderly pace, whereas the battlespace PKI "enterprise" will grow and shrink abruptly as units are deployed or withdrawn from the battlespace. COTS and GOTS PKIs are seldom required to incorporate temporary "enterprise mergers", whereas the battlespace "enterprise" will need to incorporate temporary coalitions of forces drawn from various nations. This paper addresses both well-known and novel techniques for tailoring PKI for the battlespace environment. These techniques include the design of the security architecture, the selection of appropriate options within PKI standards, and some new PKI protocols that offer significant advantages in the battlespace.

  16. MATERIAL CHOICE AND BLANKS OPERATION TECHNOLOGY OF AK6 ALUMINIUM ALLOY

    Directory of Open Access Journals (Sweden)

    N. YE. Kalinina

    2014-03-01

    Full Text Available Purpose. Justification of the material and heat treatment method of aluminum alloy for the manufacturing of parts, type «plate» based on the results of microstructure and mechanical properties research; development of technological process of blanks operation of AK6 aluminum alloy. Methodology. Powdered alloy based on aluminum type AK6 was the research material. Finished forgings with the size 2520×1520×65 mm were obtained as a result of the preparation and forging of the blanks. After mechanical treatment of the blanks they were exposed to thermal processing and milling. Structure of the metal was examined under light microscope MIM-8M. Brinell hardness was used as the strength alloy characteristic. Findings. Influence analysis of alloy elements on the structure of deformable aluminum alloys was carried out. Research of influence of heat treatment modes on structure and properties of the AK6 alloy were performed. The improved technological process, which made it possible to obtain the item with the improved structure and properties and lower costs is offered. Originality. The samples of AK6 powdered alloy on fire resistance were tested. It is established that under heating of an example in the oxidative flame, it does not ignite to a temperature of 705 °C. The cause of high fire resistance of AK6 alloy samples was found, it is connected with the presence in the material the evenly distributed, small oxide inclusions and amorphous oxide film on the surface. Practical value. Hard conditions of work (corrosion in marine and industrial atmosphere, static and shock loads, cyclic temperature allow the use of the item in various designs.

  17. Development technique for deep drawing without blank holder to produce circular cup of brass alloy

    OpenAIRE

    Ali Hassan Saleh; Ammer Khalaf Ali

    2015-01-01

    Of this technique compared to the conventional deep drawing is that the circular cup can be carried out in single action press with limit In this paper a new mechanism for deep drawing was proposed to produce circular cup from thin plate without blank holder. In this technique the die assembly includes punch, die and die-punch. A 2D axisymmetric finite element model was built using DEFORM software. Effect of die geometry (half- cone angle) on maximum load, thickness distribution, strain distr...

  18. Blank Field Sources in the ROSAT HRI Brera Multiscale Wavelet catalog

    OpenAIRE

    Chieregato, M.; Campana, S.; Treves, A.; Moretti, A.; Mignani, R. P.; Tagliaferri, G.

    2005-01-01

    The search for Blank Field Sources (BFS), i.e. X-ray sources without optical counterparts, paves the way to the identification of unusual objects in the X-ray sky. Here we present four BFS detected in the Brera Multiscale Wavelet catalog of ROSAT HRI observations. This sample has been selected on the basis of source brightness, distance from possible counterparts at other wavelengths, point-like shape and good estimate of the X-ray flux (f_X). The observed f_X and the limiting magnitude of th...

  19. An evaluation testing technique of single event effect using Beam Blanking SEM

    Energy Technology Data Exchange (ETDEWEB)

    Aoki, J; Hada, T; Pesce, A; Akutsu, T; Matsuda, S [National Space Development Agency of Japan, Tsukuba, Ibaraki (Japan). Tsukuba Space Center; Igarashi, T; Baba, S

    1997-03-01

    Beam Blanking SEM (Scanning Electron Microscope) testing technique has been applied to CMOS SRAM devices to evaluate the occurence of soft errors on memory cells. Cross-section versus beam current and LET curves derived from BBSEM and heavy ion testing technique, respectively, have been compared. A linear relation between BBSEM current and heavy ion LET has been found. The purpose of this study was to demonstrate that the application of focused pulsed electron beam could be a reliable, convenient and inexpensive tool to investigate the effects of heavy ions and high energy particles on memory devices for space application. (author)

  20. Taming Parasites by Tailoring Them

    Directory of Open Access Journals (Sweden)

    Bingjian Ren

    2017-07-01

    Full Text Available The next-generation gene editing based on CRISPR (clustered regularly interspaced short palindromic repeats has been successfully implemented in a wide range of organisms including some protozoan parasites. However, application of such a versatile game-changing technology in molecular parasitology remains fairly underexplored. Here, we briefly introduce state-of-the-art in human and mouse research and usher new directions to drive the parasitology research in the years to come. In precise, we outline contemporary ways to embolden existing apicomplexan and kinetoplastid parasite models by commissioning front-line gene-tailoring methods, and illustrate how we can break the enduring gridlock of gene manipulation in non-model parasitic protists to tackle intriguing questions that remain long unresolved otherwise. We show how a judicious solicitation of the CRISPR technology can eventually balance out the two facets of pathogen-host interplay.

  1. Enhancing native defect sensitivity for EUV actinic blank inspection: optimized pupil engineering and photon noise study

    Science.gov (United States)

    Wang, Yow-Gwo; Neureuther, Andrew; Naulleau, Patrick

    2016-03-01

    In this paper, we discuss the impact of optimized pupil engineering and photon noise on native defect sensitivity in EUV actinic blank inspection. Native defects include phase-dominated defects, absorber defects, and defects with a combination of phase and absorption behavior. First, we extend the idea of the Zernike phase contrast (ZPC) method and study the impact of optimum phase shift in the pupil plane on native defect sensitivity, showing a 23% signal-to-noise ratio (SNR) enhancement compare to bright field (BF) for a phase defect with 20% absorption. We also describe the possibility to increase target defect SNR on target defect sizes at the price of losing the sensitivity on smaller (non-critical) defects. Moreover, we show the advantage of the optimized phase contrast (OZPC) method over BF EUV actinic blank inspection. A single focus scan from OZPC has better inspection efficiency over BF. Second, we make a detailed comparison between the phase contrast with apodization (AZPC) method and dark field (DF) method based on defect sensitivity in the presence of both photon shot noise and camera noise. Performance is compared for a variety of photon levels, mask roughness conditions, and combinations of defect phase and absorption.

  2. Technique for rapid at-wavelength inspection of extreme ultraviolet mask blanks

    International Nuclear Information System (INIS)

    Spector, S. J.; White, D. L.; Tennant, D. M.; Ocola, L. E.; Novembre, A. E.; Peabody, M. L.; Wood, O. R. II

    1999-01-01

    We have developed two new methods for at-wavelength inspection of mask blanks for extreme-ultraviolet (EUV) lithography. In one method an EUV photoresist is applied directly to a mask blank which is then flood exposed with EUV light and partially developed. In the second method, the photoresist is applied to an EUV transparent membrane that is placed in close proximity to the mask and then exposed and developed. Both reflectivity defects and phase defects alter the exposure of the resist, resulting in mounds of resist at defect sites that can then be located by visual inspection. In the direct application method, a higher contrast resist was shown to increase the height of the mounds, thereby improving the sensitivity of the technique. In the membrane method, a holographic technique was used to reconstruct an image of the mask, revealing the presence of very small defects, approximately 0.2 μm in size. The demonstrated clean transfer of phase and amplitude defects to resist features on a membrane will be important when flagging defects in an automatic inspection tool. (c) 1999 American Vacuum Society

  3. Influence of Filler Alloy Composition and Process Parameters on the Intermetallic Layer Thickness in Single-Sided Cold Metal Transfer Welding of Aluminum-Steel Blanks

    Science.gov (United States)

    Silvayeh, Zahra; Vallant, Rudolf; Sommitsch, Christof; Götzinger, Bruno; Karner, Werner; Hartmann, Matthias

    2017-11-01

    Hybrid components made of aluminum alloys and high-strength steels are typically used in automotive lightweight applications. Dissimilar joining of these materials is quite challenging; however, it is mandatory in order to produce multimaterial car body structures. Since especially welding of tailored blanks is of utmost interest, single-sided Cold Metal Transfer butt welding of thin sheets of aluminum alloy EN AW 6014 T4 and galvanized dual-phase steel HCT 450 X + ZE 75/75 was experimentally investigated in this study. The influence of different filler alloy compositions and welding process parameters on the thickness of the intermetallic layer, which forms between the weld seam and the steel sheet, was studied. The microstructures of the weld seam and of the intermetallic layer were characterized using conventional optical light microscopy and scanning electron microscopy. The results reveal that increasing the heat input and decreasing the cooling intensity tend to increase the layer thickness. The silicon content of the filler alloy has the strongest influence on the thickness of the intermetallic layer, whereas the magnesium and scandium contents of the filler alloy influence the cracking tendency. The layer thickness is not uniform and shows spatial variations along the bonding interface. The thinnest intermetallic layer (mean thickness < 4 µm) is obtained using the silicon-rich filler Al-3Si-1Mn, but the layer is more than twice as thick when different low-silicon fillers are used.

  4. Production of annular blanks for Mo-99 using natural uranium, LEU uranium, nickel and structural Al-3003 plates

    International Nuclear Information System (INIS)

    Lisboa, J.R.; Barrera, M.E.; Marin, J.

    2010-01-01

    The Tc-99m radioisotope for medical use is the one most used in nuclear medicine worldwide. In Chile the Tc-99m is applied in more than 90% of nuclear medicine studies. In order to supply the whole country with this radioisotope, in 2005-2007 the CCHEN developed its own production of Tc-99m generators from Mo-99 imported from Canada, which are prepared with the activity needed by the Chilean hospitals and clinics. As of 2007 Mo-99 was no longer imported, and since then the Tc-99m is produced only by neutron activation of the Mo. The present challenge is to produce Mo-99 by irradiating blanks that contain enriched uranium foils, with locally produced LEU. The annular blank consists of 2 concentric tubes of A1-3003 structural aluminum that, in an interior annular space, contain a LEU foil, covered on both sides by a nickel foil. This work presents the development of the production technology for annular blanks using natural uranium and U-325 enriched uranium. The structural components are made with A1-3003 aluminum alloy, the foils are 13 grams of uranium measuring 100 x 50 mm and 120-150 μ thick. The blank was assembled using a methodology to control, adapt and assemble the blank's different internal components. A foil of natural uranium and LEU uranium, and a nickel foil are included, used as a barrier for the escape of fission products. During the blank's expansion, for analysis alcohol as lubricant was used, allowing the expander to move smoothly through the inside of the blank. The blank was sealed by TIG welding with a pulsed AC current and a mixture of Ar-5% He gases. Two methods were used for the water tightness test; for high escape levels the temperature was used as a promoter of the ΔP provided by hot water and liquid nitrogen, for low escape levels high vacuum technology was used where the ΔP is provided by a high pressure helium atmosphere. The technology for the production of annular LEU blanks was achieved by applying innovations to technologies

  5. Warm Deep Drawing of Rectangular Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force

    International Nuclear Information System (INIS)

    Peng Yinghong; Chang Qunfeng; Li Dayong; Zeng Xiaoqin

    2007-01-01

    AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. Uniaxial tensile tests are conducted using a Gleeble 3500 thermal - mechanical simulator, and the mechanical properties of AZ31 magnesium alloy sheet are analyzed. A warm deep drawing process of square part is also simulated by the finite element method. The influences of blank holder force on the formability are numerically investigated. A double-action hydraulic press that can realize adjustable blank holder forces is developed and its working principle and control system are introduced. Some warm deep drawing experiments of square parts of AZ31 magnesium alloy sheet are also performed. Different variation schemes of the blank holder force with the stroke of the punch are tested, and the experiment results are compared. Results show that the suitable blank holder force variation scheme is a ladder curve with the punch stroke. Adopting the variable blank holder force technique can improve 13.2% of the drawing depth of square parts of AZ31 magnesium alloy sheet

  6. Tool life equation for blanking 18-8 stainless steel strips

    Directory of Open Access Journals (Sweden)

    Faura, F.

    1998-08-01

    Full Text Available Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm. Firstly it has analyzed the different studies that have previously delt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. To this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these tests were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20 % of the work material thickness.

    En el presente artículo se presenta un modelo de ecuación de vida de herramientas para punzonado circular de chapa de acero inoxidable 18-8 (1 mm de espesor. Se han analizado inicialmente los diferentes estudios que previamente han abordado este problema. Posteriormente, teniendo en cuenta los experimentos realizados recientemente, se propone una formulación simple para predecir con Habilidad suficiente la vida de la herramienta. Para este propósito se han examinado los diferentes parámetros que afectan al proceso de desgaste, infiriendo a partir de estos, los parámetros fundamentales que lo regulan y sobre los cuales se han configurado las diferentes ecuaciones. Los ensayos fueron realizados en una prensa de 20 t y una velocidad de punzonado de 150 golpes/min. Los materiales de los punzones usados en los ensayos fueron AISI A2 y AISI D2 con diámetros comprendidos entre 1,5 y 10 mm. Los ensayos se realizaron para juegos de corte comprendidos entre un 5 y 20 % del espesor de la chapa.

  7. Molecular tailoring of solid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Evenson, Simon Alan

    1997-07-01

    The overall performance of a material can be dramatically improved by tailoring its surface at the molecular level. The aim of this project was to develop a universal technique for attaching dendrimers (well-defined, nanoscale, functional polymers) and Jeffamines (high molecular weight polymer chains) to the surface of any shaped solid substrate. This desire for controlled functionalization is ultimately driven by the need to improve material compatibility in various biomedical applications. Atomic force microscopy (AFM) was used initially to study the packing and structure of Langmuir-Blodgett films on surfaces, and subsequently resulted in the first visualization of individual, spherically shaped, nanoscopic polyamidoamine dendrimers. The next goal was to develop a methodology for attaching such macromolecules to inert surfaces. Thin copolymer films were deposited onto solid substrates to produce materials with a fixed concentration of surface anhydride groups. Vapor-phase functionalization reactions were then carried out with trifluorinated amines to confirm the viability of this technique to bond molecules to surfaces. Finally, pulsed plasma polymerization of maleic anhydride took this approach one stage further, by forming well-adhered polymer films containing a predetermined concentration of reactive anhydride groups. Subsequent functionalization reactions led to the secure attachment of dendrimers and Jeffamines at any desired packing density. An alternative route to biocompatibilization used 1,2-ethanedithiol to yield thiolated surfaces containing very high polymeric sulfur : carbon ratios. (author)

  8. Molecular tailoring of solid surfaces

    International Nuclear Information System (INIS)

    Evenson, Simon Alan

    1997-01-01

    The overall performance of a material can be dramatically improved by tailoring its surface at the molecular level. The aim of this project was to develop a universal technique for attaching dendrimers (well-defined, nanoscale, functional polymers) and Jeffamines (high molecular weight polymer chains) to the surface of any shaped solid substrate. This desire for controlled functionalization is ultimately driven by the need to improve material compatibility in various biomedical applications. Atomic force microscopy (AFM) was used initially to study the packing and structure of Langmuir-Blodgett films on surfaces, and subsequently resulted in the first visualization of individual, spherically shaped, nanoscopic polyamidoamine dendrimers. The next goal was to develop a methodology for attaching such macromolecules to inert surfaces. Thin copolymer films were deposited onto solid substrates to produce materials with a fixed concentration of surface anhydride groups. Vapor-phase functionalization reactions were then carried out with trifluorinated amines to confirm the viability of this technique to bond molecules to surfaces. Finally, pulsed plasma polymerization of maleic anhydride took this approach one stage further, by forming well-adhered polymer films containing a predetermined concentration of reactive anhydride groups. Subsequent functionalization reactions led to the secure attachment of dendrimers and Jeffamines at any desired packing density. An alternative route to biocompatibilization used 1,2-ethanedithiol to yield thiolated surfaces containing very high polymeric sulfur : carbon ratios. (author)

  9. Numerical analysis of tailored sheets to improve the quality of components made by SPIF

    Science.gov (United States)

    Gagliardi, Francesco; Ambrogio, Giuseppina; Cozza, Anna; Pulice, Diego; Filice, Luigino

    2018-05-01

    In this paper, the authors pointed out a study on the profitable combination of forming techniques. More in detail, the attention has been put on the combination of the single point incremental forming (SPIF) and, generally, speaking, of an additional process that can lead to a material thickening on the initial blank considering the local thinning which the sheets undergo at. Focalizing the attention of the research on the excessive thinning of parts made by SPIF, a hybrid approach can be thought as a viable solution to reduce the not homogeneous thickness distribution of the sheet. In fact, the basic idea is to work on a blank previously modified by a deformation step performed, for instance, by forming, additive or subtractive processes. To evaluate the effectiveness of this hybrid solution, a FE numerical model has been defined to analyze the thickness variation on tailored sheets incrementally formed optimizing the material distribution according to the shape to be manufactured. Simulations based on the explicit formulation have been set up for the model implementation. The mechanical properties of the sheet material have been taken in literature and a frustum of cone as benchmark profile has been considered for the performed analysis. The outcomes of numerical model have been evaluated in terms of both maximum thinning and final thickness distribution. The feasibility of the proposed approach will be deeply detailed in the paper.

  10. Filling in the Blank:a Postmodern Experiment on Fiction and Human Existence

    Institute of Scientific and Technical Information of China (English)

    沈冬欢

    2014-01-01

    In his short story collection Lost in the Funhouse, John Barth attempts to deal with the existential plights that fictional writing and human beings are faced with.“Title”, the most postmodern story in the collection, centers on the issue of“filling in the blank,”in which Barth leads readers to solve the problem and create the story with him. To examine Barth’s postmodern ex-periment in“Title”, this paper mainly focuses on the following three questions:what is the“blank”? How to fill in it? Why to fill in it in that way? By answering them, we may see how Barth reconciles the conflict between the urgency of“filling in the blank”and the failure of filling them.

  11. Blank book on energy: priority to renewable energies and energy savings

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The British minister of industry and trade has presented a blank book on energy. This report has in view to curb the emission of greenhouse gases by 60 % before 2050 and to double the contribution of renewable energies by 2020 with an intermediate objective of 10 % in 2010. Today this contribution reaches 3 %. New nuclear power plants are not expected to be built. This report recalls that the United-Kingdom (UK) imports half the coal it needs and states that by 2006 UK will become a net gas importing country and by 2010 a net oil importing country. The solution promoted by the report is to rely on diverse energy sources and on diverse supplying countries. (A.C.)

  12. Computer simulation of quenching uranium-0.75% titanium penetrator blanks. Final report for FY 1984

    International Nuclear Information System (INIS)

    Llewellyn, G.H.; Aramayo, G.A.; Childs, K.W.; Ludtka, G.M.; Siman-Tov, M.

    1985-02-01

    The models developed can be used as a basis to understand, study, and optimize the process. Information obtained from these models can be used to analytically predict temperature distribution, cooling rates, stresses, deformation, phase composition, and possibly the prediction of void formations, all as functions of both position and time. It was demonstrated that nonsymmetrical boundary conditions can lead to bowing of the penetrator blanks and applicable techniques were developed to optimize the quenching process. Experiments for deriving physical and mechanical properties for the uranium-0.75% Ti alloy including data on the heats of transformation have been performed. It is concluded that the contribution of the transformation heat constitutes about 19% of the total heat transfer involved and is, therefore, a significant factor affecting the metallurgical behavior of the alloy during the quenching operation. This behavior is less sensitive to the dependence of the property data on temperature

  13. Towards automatic recognition of irregular, short-open answers in Fill-in-the-blank tests

    Directory of Open Access Journals (Sweden)

    Sergio A. Rojas

    2014-01-01

    Full Text Available Assessment of student knowledge in Learning Management Systems such as Moodle is mostly conducted using close-ended questions (e.g. multiple-choice whose answers are straightforward to grade without human intervention. FILL-IN-THE-BLANK tests are usually more challenging since they require test-takers to recall concepts and associations not available in the statement of the question itself (no choices or hints are given. Automatic assessment of the latter currently requires the test-taker to give a verbatim answer, that is, free of spelling or typographical mistakes. In this paper, we consider an adapted version of a classical text-matching algorithm that may prevent wrong grading in automatic assessment of FILL-IN-THE-BLANK questions whenever irregular (similar but not exact answers occur due to such types of error. The technique was tested in two scenarios. In the first scenario, misspelled single-word answers to an Internet security questionnaire were correctly recognized within a two letter editing tolerance (achieving 99 % accuracy. The second scenario involved short-open answers to computer programming quizzes (i.e. small blocks of code requiring a structure that conforms to the syntactic rules of the programming language. Twenty-one real-world answers written up by students, taking a computer programming course, were assessed by the method. This assessment addressed the lack of precision in terms of programmer-style artifacts (such as unfamiliar variable or function nomenclature and uses an admissible tolerance of up to 20 % letter-level typos. These scores were satisfactory corroborated by a human expert. Additional findings and potential enhancements to the technique are also discussed.

  14. Experimental and numerical analysis of interlocking rib formation at sheet metal blanking

    Science.gov (United States)

    Bolka, Špela; Bratuš, Vitoslav; Starman, Bojan; Mole, Nikolaj

    2018-05-01

    Cores for electrical motors are typically produced by blanking of laminations and then stacking them together, with, for instance, interlocking ribs or welding. Strict geometrical tolerances, both on the lamination and on the stack, combined with complex part geometry and harder steel strip material, call for use of predictive methods to optimize the process before actual blanking to reduce the costs and speed up the process. One of the major influences on the final stack geometry is the quality of the interlocking ribs. A rib is formed in one step and joined with the rib of the preceding lamination in the next. The quality of the joint determines the firmness of the stack and also influences its. The geometrical and positional accuracy is thus crucial in rib formation process. In this study, a complex experimental and numerical analysis of interlocking rib formation has been performed. The aim of the analysis is to numerically predict the shape of the rib in order to perform a numerical simulation of the stack formation in the next step of the process. A detailed experimental research has been performed in order to characterize influential parameters on the rib formation and the geometry of the ribs itself, using classical and 3D laser microscopy. The formation of the interlocking rib is then simulated using Abaqus Explicit. The Hilll 48 constitutive material model is based on extensive and novel material characterization process, combining data from in-plane and out-of-plane material tests to perform a 3D analysis of both, rib formation and rib joining. The study shows good correlation between the experimental and numerical results.

  15. Minimization of the blank values in the neutron activation analysis of biological samples considering the whole procedure

    International Nuclear Information System (INIS)

    Lux, F.; Bereznai, T.; Trebert Haeberlin, S.

    1987-01-01

    During the determination of trace element contents of animal tissue by neutron activation analysis in the course of structure-activity relationship studies on platinum containing cancer drugs and wound healing the authors tried to minimize the blank values that are caused by different sources of contamination during surgery, sampling and the activation analysis procedure. The following topics were investigated: abrasions from scalpels made of stainless steel, titanium or quartz, the type of surgery, the surface contaminations of the quartz ampoules, etc. The measures to be taken to reduce tha blank values are described. (author) 19 refs.; 4 tables

  16. Testing the Reliability of Delay Discounting of Ten Commodities Using the Fill-in-the-Blank Method

    Science.gov (United States)

    Weatherly, Jeffrey N.; Derenne, Adam; Terrell, Heather K.

    2011-01-01

    Several measures of delay discounting have been shown to be reliable over periods of up to 3 months. In the present study, 115 participants completed a fill-in-the-blank (FITB) delay-discounting task on sets of 5 different commodities, 12 weeks apart. Results showed that discounting rates were not well described by a hyperbolic function but were…

  17. 75 FR 9436 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Science.gov (United States)

    2010-03-02

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,041] Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated January 29, 2010, the petitioner...

  18. EUV blank defect and particle inspection with high throughput immersion AFM with 1nm 3D resolution

    NARCIS (Netherlands)

    Es, M.H. van; Sadeghian Marnani, H.

    2016-01-01

    Inspection of EUV mask substrates and blanks is demanding. We envision this is a good target application for massively parallel Atomic Force Microscopy (AFM). We envision to do a full surface characterization of EUV masks with AFM enabling 1nm true 3D resolution over the entire surface. The limiting

  19. The Use of Application Blanks as Pre-Screening Devices in Employee Selection: An Assessment of Practices in Public Schools.

    Science.gov (United States)

    Bredeson, Paul V.

    1988-01-01

    Reports on a study of the use of employment application blanks as prescreening devices in public school employee selection. Findings suggest two major areas for further research. The first relates to legal compliance with Equal Opportunity Employment guidelines. The second concerns information relevancy to personnel selection. (JAM)

  20. Continuous tailoring activities in software engineering

    OpenAIRE

    Ribaud , Vincent; Saliou , Philippe

    2004-01-01

    International audience; Software activities belong to different processes. Tailoring software processes aims to relate the operational software processes of an organization to the effective project. With the information technology industry moving ever faster, established positions are undergoing constant evolutionary change. The failure of a complex tailoring process of a management information system is reported. There is a need to adopt software processes that can operate under constant cha...

  1. Setup of a Parameterized FE Model for the Die Roll Prediction in Fine Blanking using Artificial Neural Networks

    Science.gov (United States)

    Stanke, J.; Trauth, D.; Feuerhack, A.; Klocke, F.

    2017-09-01

    Die roll is a morphological feature of fine blanked sheared edges. The die roll reduces the functional part of the sheared edge. To compensate for the die roll thicker sheet metal strips and secondary machining must be used. However, in order to avoid this, the influence of various fine blanking process parameters on the die roll has been experimentally and numerically studied, but there is still a lack of knowledge on the effects of some factors and especially factor interactions on the die roll. Recent changes in the field of artificial intelligence motivate the hybrid use of the finite element method and artificial neural networks to account for these non-considered parameters. Therefore, a set of simulations using a validated finite element model of fine blanking is firstly used to train an artificial neural network. Then the artificial neural network is trained with thousands of experimental trials. Thus, the objective of this contribution is to develop an artificial neural network that reliably predicts the die roll. Therefore, in this contribution, the setup of a fully parameterized 2D FE model is presented that will be used for batch training of an artificial neural network. The FE model enables an automatic variation of the edge radii of blank punch and die plate, the counter and blank holder force, the sheet metal thickness and part diameter, V-ring height and position, cutting velocity as well as material parameters covered by the Hensel-Spittel model for 16MnCr5 (1.7131, AISI/SAE 5115). The FE model is validated using experimental trails. The results of this contribution is a FE model suitable to perform 9.623 simulations and to pass the simulated die roll width and height automatically to an artificial neural network.

  2. Tailoring of mobility advices to consumers. Executive summary; Tailoring van mobiliteitsadviezen aan consumenten. Managementsamenvatting

    Energy Technology Data Exchange (ETDEWEB)

    De Weerdt, I.; Jonkers, R. [ResCon, Haarlem (Netherlands)

    2003-09-01

    An outline is given of the options to apply so-called computer tailoring in the field of mobility. A feasibility study has been carried out for the realization of a computerized tailored mobility programme. Tailoring is a method, based on social-scientific theories on behavioral change, by means of which information is tailored to individual circumstances, preferences and motivation. [Dutch] De mogelijkheden van computer tailoring (tailoring is een methodiek die gebaseerd is op sociaal-wetenschappelijke theorieen over gedragsverandering, waarbij de aangeboden informatie is afgestemd op individuele omstandigheden, preferenties en motivaties) op het gebied van mobiliteit worden verkend. Er is een haalbaarheidsonderzoek uitgevoerd ter voorbereiding op de realisatie van een computer tailored mobiliteitsprogramma. In dit onderzoek is nagegaan: of consumenten belangstelling hebben voor informatie op maat over mobiliteit; waar consumenten zelf de meeste mogelijkheden zien om hun mobiliteitspatroon te veranderen (en dus meer duurzame mobiliteitsopties toe te passen); hoe het gedrag van consumenten m.b.t. mobiliteit d.m.v. een tailoring systeem gericht beinvloed kan worden; of er organisaties te vinden zijn die de exploitatie van een tailoring systeem m.b.t. mobiliteit op zich zouden willen nemen; of de ontwikkeling van een dergelijk systeem kosten effectief kan zijn.

  3. Tailoring of mobility advices to consumers. A determinants survey; Tailoring van mobiliteitsadviezen aan consumenten. Een determinantenonderzoek

    Energy Technology Data Exchange (ETDEWEB)

    De Weerdt, I.; Jonkers, R. [ResCon, Haarlem (Netherlands)

    2003-08-01

    An outline is given of the options to apply so-called computer tailoring in the field of mobility. A feasibility study has been carried out for the realization of a computerized tailored mobility programme. Tailoring is a method, based on social-scientific theories on behavioral change, by means of which information is tailored to individual circumstances, preferences and motivation. [Dutch] De mogelijkheden van computer tailoring (tailoring is een methodiek die gebaseerd is op sociaal-wetenschappelijke theorieen over gedragsverandering, waarbij de aangeboden informatie is afgestemd op individuele omstandigheden, preferenties en motivaties) op het gebied van mobiliteit worden verkend. Er is een haalbaarheidsonderzoek uitgevoerd ter voorbereiding op de realisatie van een computer tailored mobiliteitsprogramma. In dit onderzoek is nagegaan: of consumenten belangstelling hebben voor informatie op maat over mobiliteit; waar consumenten zelf de meeste mogelijkheden zien om hun mobiliteitspatroon te veranderen (en dus meer duurzame mobiliteitsopties toe te passen); hoe het gedrag van consumenten m.b.t. mobiliteit d.m.v. een tailoring systeem gericht beinvloed kan worden; of er organisaties te vinden zijn die de exploitatie van een tailoring systeem m.b.t. mobiliteit op zich zouden willen nemen; of de ontwikkeling van een dergelijk systeem kosten effectief kan zijn.

  4. Electrospun Blank Nanocoating for Improved Sustained Release Profiles from Medicated Gliadin Nanofibers

    Directory of Open Access Journals (Sweden)

    Xinkuan Liu

    2018-03-01

    Full Text Available Nanomaterials providing sustained release profiles are highly desired for efficacious drug delivery. Advanced nanotechnologies are useful tools for creating elaborate nanostructure-based nanomaterials to achieve the designed functional performances. In this research, a modified coaxial electrospinning was explored to fabricate a novel core-sheath nanostructure (nanofibers F2, in which a sheath drug-free gliadin layer was successfully coated on the core ketoprofen (KET-gliadin nanocomposite. A monolithic nanocomposite (nanofibers F1 that was generated through traditional blending electrospinning of core fluid was utilized as a control. Scanning electron microscopy demonstrated that both nanofibers F1 and F2 were linear. Transmission electron microscopy verified that nanofibers F2 featured a clear core-sheath nanostructure with a thin sheath layer about 25 nm, whereas their cores and nanofibers F1 were homogeneous KET-gliadin nanocomposites. X-ray diffraction patterns verified that, as a result of fine compatibility, KET was dispersed in gliadin in an amorphous state. In vitro dissolution tests demonstrated that the thin blank nanocoating in nanofibers F2 significantly modified drug release kinetics from a traditional exponential equation of nanofibers F1 to a zero-order controlled release model, linearly freeing 95.7 ± 4.7% of the loaded cargoes over a time period of 16 h.

  5. Electrospun Blank Nanocoating for Improved Sustained Release Profiles from Medicated Gliadin Nanofibers.

    Science.gov (United States)

    Liu, Xinkuan; Shao, Wenyi; Luo, Mingyi; Bian, Jiayin; Yu, Deng-Guang

    2018-03-22

    Nanomaterials providing sustained release profiles are highly desired for efficacious drug delivery. Advanced nanotechnologies are useful tools for creating elaborate nanostructure-based nanomaterials to achieve the designed functional performances. In this research, a modified coaxial electrospinning was explored to fabricate a novel core-sheath nanostructure (nanofibers F2), in which a sheath drug-free gliadin layer was successfully coated on the core ketoprofen (KET)-gliadin nanocomposite. A monolithic nanocomposite (nanofibers F1) that was generated through traditional blending electrospinning of core fluid was utilized as a control. Scanning electron microscopy demonstrated that both nanofibers F1 and F2 were linear. Transmission electron microscopy verified that nanofibers F2 featured a clear core-sheath nanostructure with a thin sheath layer about 25 nm, whereas their cores and nanofibers F1 were homogeneous KET-gliadin nanocomposites. X-ray diffraction patterns verified that, as a result of fine compatibility, KET was dispersed in gliadin in an amorphous state. In vitro dissolution tests demonstrated that the thin blank nanocoating in nanofibers F2 significantly modified drug release kinetics from a traditional exponential equation of nanofibers F1 to a zero-order controlled release model, linearly freeing 95.7 ± 4.7% of the loaded cargoes over a time period of 16 h.

  6. A spectral blanking-out controller for demonstration of information barrier technology

    International Nuclear Information System (INIS)

    Liu Suping; Gong Jian; Hu Guangchun; Zhang Jianhua

    2006-01-01

    Information barrier technology has become more and more important in the R and D of radiation fingerprint verification associated with classified items such as nuclear warheads, nuclear components and military-used nuclear materials. The function of information barriers is two-fold: one is to prevent the classified information from leaking out; the other is to provide creditable verification. To fulfill these two functions, the information barriers for a viable verification system (including all its hardware and software) must be designed on the basic principles of protecting classified information and the ability to authenticate. The Spectral Blanking-out Controller (SBC) is developed to illustrate the two functions of the information barriers and to explore some practice measures to meet the required design fundamentals. This paper briefs the task assigned to the SBC, the specific design concerns and the practical information barrier measures. The R and D of the SBC embodies the concepts of information barrier technology and has to conform to the basic guidelines: If a verification system is expected to possess strict information barriers, the design of the system must be integrative with due considerations given to the factors such as the efficiency of the verification technique, the possible measures to protect the classified information from directly or indirectly leaking out, the complete openness in all aspects of the system for the inspectors to authenticate the system for the sake of achieving certain degree of confidence on the verification results. (authors)

  7. Tailored nutrition education: is it really effective?

    Science.gov (United States)

    Eyles, Helen; Ni Mhurchu, Cliona

    2012-03-01

    There has been a growing interest in tailored nutrition education over the previous decade, with a number of literature reviews suggesting this intervention strategy holds considerable potential. Nevertheless, the majority of intervention trials undertaken to date have employed subjective self-report outcome measures (such as dietary recalls). The aim of the present review is to further consider the likely true effect of tailored nutrition education by assessing the findings of tailored nutrition education intervention trials where objective outcome measures (such as sales data) have been employed. Four trials of tailored nutrition education employing objective outcome measures were identified: one was undertaken in eight low-cost supermarkets in New Zealand (2010; n 1104); one was an online intervention trial in Australia (2006; n 497); and two were undertaken in US supermarkets (1997 and 2001; n 105 and 296, respectively). Findings from the high-quality New Zealand trial were negative. Findings from the US trials were also generally negative, although reporting was poor making it difficult to assess quality. Findings from the high-quality online trial were positive, although have limited generalisability for public health. Trials employing objective outcome measures strongly suggest tailored nutrition education is not effective as a stand-alone strategy. However, further large, high-quality trials employing objective outcome measures are needed to determine the true effectiveness of this popular nutrition intervention strategy. Regardless, education plays an important role in generating social understanding and acceptance of broader interventions to improve nutrition.

  8. Nanoparticles and their tailoring with laser light

    International Nuclear Information System (INIS)

    Hubenthal, Frank

    2009-01-01

    Monodisperse noble metal nanoparticles are of tremendous interest for numerous applications, such as surface-enhanced Raman spectroscopy, catalysis or biosensing. However, preparation of monodisperse metal nanoparticles is still a challenging task, because typical preparation methods yield nanoparticle ensembles with broad shape and/or size distributions. To overcome this drawback, tailoring of metal nanoparticles with laser light has been developed, which is based on the pronounced shape- and size-dependent optical properties of metal nanoparticles. I will demonstrate that nanoparticle tailoring with ns-pulsed laser light is a suitable method to prepare nanoparticle ensembles with a narrow shape and/or size distribution. While irradiation with ns-pulsed laser light during nanoparticle growth permits a precise shape tailoring, post-grown irradiation allows a size tailoring. For example, the initial broad Gaussian size distribution of silver nanoparticles on quartz substrates with a standard deviation of σ= 30% is significantly reduced to as little as σ= 10% after tailoring. This paper addresses teachers of undergraduate and advanced school level as well as students. It assumes some fundamental knowledge in solid-state physics, thermodynamics and resonance vibration.

  9. The Economy of Persistence: Mario the Tailor

    Directory of Open Access Journals (Sweden)

    Prudence Black

    2016-03-01

    Full Text Available Mario Conte has had a tailor shop in King Street, Newtown since the mid 1960s. Taking an interview with Mario as its point of departure, this article describes the persistence of a skilled worker whose practices and techniques remain the same in a world that has long changed. While inattentive to what rules might be used to decorate a shop window, Mario continues to make and sew in the way that he learnt in post-war Italy. Mario’s persistence could be described as all the skills and other elements that need to be in place to keep him working, in particular the tradition of tailoring techniques he has remained true to over the last fifty years. The hand stitching of his tailoring is like a metronome of that persistence.

  10. Third generation of Thyssen tailored tubes - a new category of tubular products

    Energy Technology Data Exchange (ETDEWEB)

    Flehmig, T.; Brueggenbrock, M.; Kibben, M.; Schwenecke, S. [ThyssenKrupp Stahl, Duisburg (Germany)

    2005-07-01

    Further weight saving goals have prompted the automotive industry to design lighter car body structures in order to reduce fuel consumption, while maintaining the high safety standards for occupants. Body structures developed with large portions of closed profiles have a so-called ''profile intensive design.'' Particularly in the case of large scale production, it is necessary to have cost effective manufacturing methods. Therefore, production and processing require short process chains as well as the latest techniques. New forming technologies, combined with laser-beam welding and hydroforming processes is one strategy to save costs. A further way to shorten the process chain is the joining and combining of process steps at first and then later fitting the tailored tubes with the new features. The result of these efforts led to a new category of tubular products the so called ''3{sup rd} generation Thyssen Tailored Tubes {sup registered} TTT {sup registered} ''. These nearly finished parts are manufactured by a new forming technology the so called ''Thyssen Tube Curling Process''. This technique permits the direct forming from flat blanks into welded longitudinal beams, for example from the NewSteelBody {sup registered} car, without a hydroforming step, all within a single machine. The paper points out a further forming method with similar results. Compared to processes like roll or roller forming in combination with hydroforming, these new methods cause only minimal plastic strains. The paper shows some parts, manufactured by these methods. The pre-bending of Thyssen Tailored Tubes {sup registered} is also a newly developed process. (orig.)

  11. Tailoring group velocity by topology optimization

    DEFF Research Database (Denmark)

    Stainko, Roman; Sigmund, Ole

    2007-01-01

    The paper describes a systematic method for the tailoring of dispersion properties of slab-based photonic crystal waveguides. The method is based on the topology optimization method which consists in repeated finite element frequency domain analyses. The goal of the optimization process is to come...... up with slow light, zero group velocity dispersion photonic waveguides or photonic waveguides with tailored dispersion properties for dispersion compensation purposes. An example concerning the design of a wide bandwidth, constant low group velocity waveguide demonstrate the e±ciency of the method....

  12. Minimization of the blank values in the neutron activation analysis of biological samples considering the whole procedure

    International Nuclear Information System (INIS)

    Lux, F.; Bereznai, T.; Haeberlin, T.H.

    1986-01-01

    In our determination of trace element contents of animal tissue by neutron activation analysis in the course of structure-activity relationship studies on platinum containing cancer drugs and wound healing we have tried to minimize the blank values that are caused by different sources of contamination during surgery, sampling and the activation analysis procedure. The following topics have been investigated: the abrasions from scalpels made of stainless steel, titanium or quartz; the type of surgery; the homogenisation of the samples before irradiation by use of a ball milll; the surface contaminations of the quartz ampoules that pass into the digestion solution of the irradiated samples. The appropriate measures taken in order to reduce the blank values are described. The results of analyses performed under these conditions indicate the effectiveness of the given measures, especially shown by the low values obtained for the chromium contents of the analysed muscle samples. (author)

  13. Tailoring endocrine treatment for early breast cancer

    NARCIS (Netherlands)

    Fontein, Duveken Berthe Yvonne

    2014-01-01

    This thesis describes several important aspects of adjuvant endocrine therapy for postmenopausal women with endocrine-sensitive, early-stage breast cancer. In our ongoing efforts to tailor treatment so as to provide the best possible care to each of our patients, we studied the influence of various

  14. Tinker Tailor Robot Pi -- The Project

    Science.gov (United States)

    Bianchi, Lynne

    2017-01-01

    Tinker Tailor Robot Pi (TTRP) is an innovative curriculum development project, which started in September 2014. It involves in-service primary and secondary teachers, university academic engineers, business partners and pupils at Key Stages 1, 2 and 3 (ages 5-14). The focus of the work has been to explore how a pedagogy for primary engineering…

  15. LIFE-STYLE SEGMENTATION WITH TAILORED INTERVIEWING

    NARCIS (Netherlands)

    KAMAKURA, WA; WEDEL, M

    The authors present a tailored interviewing procedure for life-style segmentation. The procedure assumes that a life-style measurement instrument has been designed. A classification of a sample of consumers into life-style segments is obtained using a latent-class model. With these segments, the

  16. Aeroelastic tailoring of composite aircraft wings

    Science.gov (United States)

    Mihaila-Andres, Mihai; Larco, Ciprian; Rosu, Paul-Virgil; Rotaru, Constantin

    2017-07-01

    The need of a continuously increasing size and performance of aerospace structures has settled the composite materials as the preferred materials in aircraft structures. Apart from the clear capacity to reduce the structural weight and with it the manufacture cost and the fuel consumption while preserving proper airworthiness, the prospect of tailoring a structure using the unique directional stiffness properties of composite materials allows an aerospace engineer to optimize aircraft structures to achieve particular design objectives. This paper presents a brief review of what is known as the aeroelastic tailoring of airframes with the intent of understanding the evolution of this research topic and at the same time providing useful references for further studies.

  17. Tailoring electronic structure of polyazomethines thin films

    OpenAIRE

    J. Weszka; B. Hajduk; M. Domański; M. Chwastek; J. Jurusik; B. Jarząbek; H. Bednarski; P. Jarka

    2010-01-01

    Purpose: The aim of this work is to show how electronic properties of polyazomethine thin films deposited by chemical vapor deposition method (CVD) can be tailored by manipulating technological parameters of pristine films preparation as well as modifying them while the as-prepared films put into iodine atmosphere.Design/methodology/approach: The recent achievements in the field of designing and preparation methods to be used while preparing polymer photovoltaic solar cells or optoelectronic ...

  18. Tailored information about cancer risk and screening: a systematic review.

    NARCIS (Netherlands)

    Albada, A.; Ausems, M.G.E.M.; Bensing, J.M.; Dulmen, S. van

    2009-01-01

    OBJECTIVE: To study interventions that provide people with information about cancer risk and about screening that is tailored to their personal characteristics. We assess the tailoring characteristics, theory base and effects on risk perception, knowledge and screening behavior of these

  19. Tailored Trustworthy Spaces: Solutions for the Smart Grid

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The NITRD workshop on Tailored Trustworthy Spaces: Solutions for the Smart Grid was conceived by the Federal government to probe deeper into how Tailored Trustworthy...

  20. Summary and evaluation of pesticides in field blanks collected for the National Water-Quality Assessment Program, 1992-95

    Science.gov (United States)

    Martin, Jeffrey D.; Gilliom, Robert J.; Schertz, Terry L.

    1999-01-01

    Field blanks are quality-control samples used to assess contamination in environmental water samples. Contamination is the unintentional introduction of a chemical (pesticides in this instance) into an environmental water sample from sources such as inadequately cleaned equipment, dirty hands, dust, rain, or fumes. Contamination causes a positive bias in analytical measurements that may need to be considered in the analysis and interpretation of the environmental data. Estimates of pesticide contamination in environmental water samples collected for the National Water-Quality Assessment (NAWQA) Program are used to qualify, where needed, interpretations of the occurrence and distribution of pesticides in the surface and ground waters of the United States.

  1. A novel feedback control system – Controlling the material flow in deep drawing using distributed blank-holder force

    DEFF Research Database (Denmark)

    Endelt, Benny Ørtoft; Tommerup, Søren; Danckert, Joachim

    2013-01-01

    The performance of a feedback control system is often limited by the quality of the model on which it is based, and often the controller design is based on trial and error due to insufficient modeling capabilities. A framework is proposed where the controller design is based on classical state...... on a deep drawing operation where the objective was to control material flow throughout the part using only spatial information regarding flange draw-in. The control system controls both the magnitude and distribution of the blank-holder force. The methodology proved stable and flexible with respect...

  2. Review of Trace-Element Field-Blank Data Collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program, May 2004-January 2008

    Science.gov (United States)

    Olsen, Lisa D.; Fram, Miranda S.; Belitz, Kenneth

    2010-01-01

    Trace-element quality-control samples (for example, source-solution blanks, field blanks, and field replicates) were collected as part of a statewide investigation of groundwater quality in California, known as the Priority Basins Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basins Project is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB) to assess and monitor the quality of groundwater resources used for drinking-water supply and to improve public knowledge of groundwater quality in California. Trace-element field blanks were collected to evaluate potential bias in the corresponding environmental data. Bias in the environmental data could result from contamination in the field during sample collection, from the groundwater coming into contact with contaminants on equipment surfaces or from other sources, or from processing, shipping, or analyzing the samples. Bias affects the interpretation of environmental data, particularly if any constituents are present solely as a result of extrinsic contamination that would have otherwise been absent from the groundwater that was sampled. Field blanks were collected, analyzed, and reviewed to identify and quantify extrinsic contamination bias. Data derived from source-solution blanks and laboratory quality-control samples also were considered in evaluating potential contamination bias. Eighty-six field-blank samples collected from May 2004 to January 2008 were analyzed for the concentrations of 25 trace elements. Results from these field blanks were used to interpret the data for the 816 samples of untreated groundwater collected over the same period. Constituents analyzed were aluminum (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), boron (B), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), lithium (Li), manganese (Mn), mercury (Hg), molybdenum

  3. Lay Health Influencers: How They Tailor Brief Tobacco Cessation Interventions

    Science.gov (United States)

    Yuan, Nicole P.; Castaneda, Heide; Nichter, Mark; Nichter, Mimi; Wind, Steven; Carruth, Lauren; Muramoto, Myra

    2012-01-01

    Interventions tailored to individual smoker characteristics have increasingly received attention in the tobacco control literature. The majority of tailored interventions are generated by computers and administered with printed materials or web-based programs. The purpose of this study was to examine the tailoring activities of community lay…

  4. BLANK SHAPE OPTIMIZATION ON DEEP DRAWING OF A TWIN ELLIPTICAL CUP USING THE REDUCED BASIS TECHNIQUE METHOD

    Directory of Open Access Journals (Sweden)

    Mahdi Hasanzadeh Golshani

    2015-08-01

    Full Text Available In this project thesis, initial blank shape optimization of a twin elliptical cup to reduce earring phenomenon in anisotropic sheet deep drawing process was studied .The purpose of this study is optimization of initial blank for reduction of the ears height value. The optimization process carried out using finite element method approach, which is coupled with Taguchi design of experiments and reduced basis technique methods. The deep drawing process was simulated in FEM software ABAQUS 6.12. The results of optimization show earring height and, in addition, a number of design variables and time of process can be reduced by using this methods. After optimization process with the proposed method, the maximum reduction of the earring height would be from 21.08 mm to 0.07 mm and also it could be reduced to 0 in some of the directions. The proposed optimization design in this article allows the designers to select the practical basis shapes. This leads to obtain better results at the end of the optimization process, to reduce design variables, and also to prevent repeating the optimization steps for indirect shapes.

  5. Design study of the geometry of the blanking tool to predict the burr formation of Zircaloy-4 sheet

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jisun, E-mail: nskim@sogang.ac.kr; Lee, Hyungyil, E-mail: nskim@sogang.ac.kr; Kim, Dongchul, E-mail: nskim@sogang.ac.kr; Kim, Naksoo, E-mail: nskim@sogang.ac.kr [Sogang University, Department of Mechanical Engineering, Seoul, 121-742 (Korea, Republic of)

    2013-12-16

    In this work, we investigated factors that influence burr formation for zircaloy-4 sheet used for spacer grids of nuclear fuel roads. Factors we considered are geometric factors of punch. We changed clearance and velocity in order to consider the failure parameters, and we changed shearing angle and corner radius of L-shaped punch in order to consider geometric factors of punch. First, we carried out blanking test with failure parameter of GTN model using L-shaped punch. The tendency of failure parameters and geometric factors that affect burr formation by analyzing sheared edges is investigated. Consequently, geometric factor's influencing on the burr formation is also high as failure parameters. Then, the sheared edges and burr formation with failure parameters and geometric factors is investigated using FE analysis model. As a result of analyzing sheared edges with the variables, we checked geometric factors more affect burr formation than failure parameters. To check the reliability of the FE model, the blanking force and the sheared edges obtained from experiments are compared with the computations considering heat transfer.

  6. Advances in Precision Medicine: Tailoring Individualized Therapies.

    Science.gov (United States)

    Matchett, Kyle B; Lynam-Lennon, Niamh; Watson, R William; Brown, James A L

    2017-10-25

    The traditional bench-to-bedside pipeline involves using model systems and patient samples to provide insights into pathways deregulated in cancer. This discovery reveals new biomarkers and therapeutic targets, ultimately stratifying patients and informing cohort-based treatment options. Precision medicine (molecular profiling of individual tumors combined with established clinical-pathological parameters) reveals, in real-time, individual patient's diagnostic and prognostic risk profile, informing tailored and tumor-specific treatment plans. Here we discuss advances in precision medicine presented at the Irish Association for Cancer Research Annual Meeting, highlighting examples where personalized medicine approaches have led to precision discovery in individual tumors, informing customized treatment programs.

  7. Functions of myosin motors tailored for parasitism

    DEFF Research Database (Denmark)

    Mueller, Christina; Graindorge, Arnault; Soldati-Favre, Dominique

    2017-01-01

    Myosin motors are one of the largest protein families in eukaryotes that exhibit divergent cellular functions. Their roles in protozoans, a diverse group of anciently diverged, single celled organisms with many prominent members known to be parasitic and to cause diseases in human and livestock......, are largely unknown. In the recent years many different approaches, among them whole genome sequencing, phylogenetic analyses and functional studies have increased our understanding on the distribution, protein architecture and function of unconventional myosin motors in protozoan parasites. In Apicomplexa......, myosins turn out to be highly specialized and to exhibit unique functions tailored to accommodate the lifestyle of these parasites....

  8. A coupled analysis of fluid flow, heat transfer and deformation behavior of solidifying shell in continuously cast beam blank

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Eui; Yeo, Tae Jung; Oh, Kyu Hwan; Yoon, Jong Kyu [School of Materials Science and Engineering, Seoul Nat` l Univ., Seoul (Korea, Republic of); Han, Heung Nam [Oxford Center for Advanced Materials and Composites, Department of Materials, Univ. of Oxford (United Kingdom)

    1998-12-31

    A mathematical model for a coupled analysis of fluid flow, heat transfer and deformation behavior in the continuously cast beam blank has been developed. The fluid flow, heat transfer and solidification in the mold region were analyzed with 3-dimensional finite difference method (FDM) based on control volume method. A body fitted coordinate system was introduced for the complex geometry of the beam blank. The effects of turbulence and natural convection of molten steel were taken into account in determining the fluid flow in the strand. The thermo-elasto-plastic deformation behavior in the cast strand and the formation of air gap between the solidifying shell and the mold were analyzed by the finite element method (FEM) using the 2-dimensional slice temperature profile calculated by the FDM. The heat flow between the strand and the mold was evaluated by the coupled analysis between the fluid flow-heat transfer analysis and the thermo-elasto-plastic stress analysis. In order to determine the solid fraction in the mushy zone, the microsegregation of solute element was assessed. The effects of fluid flow on the heat transfer, the solidification of steel and the distribution of shell thickness during the casting of the beam blank were simulated. The deformation behavior of the solidifying shell and the possibility of cracking of the strand were also investigated. The recirculating flows were developed in the regions of the web and the flange tip. The impinging of the inlet flow from the nozzle retarded the growing of solidifying shell in the regions of the fillet and the flange. The air gap between the strand and the mold was formed near the region of the corner of the flange tip. At the initial stage of casting, the probability of the surface cracking was high in the regions of the fillet and the flange tip. After the middle stage of casting, the internal cracking was predicted in the regions of the flange tip, and between the fillet and the flange tip. (author) 38

  9. A coupled analysis of fluid flow, heat transfer and deformation behavior of solidifying shell in continuously cast beam blank

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Eui; Yeo, Tae Jung; Oh, Kyu Hwan; Yoon, Jong Kyu [School of Materials Science and Engineering, Seoul Nat`l Univ., Seoul (Korea, Republic of); Han, Heung Nam [Oxford Center for Advanced Materials and Composites, Department of Materials, Univ. of Oxford (United Kingdom)

    1997-12-31

    A mathematical model for a coupled analysis of fluid flow, heat transfer and deformation behavior in the continuously cast beam blank has been developed. The fluid flow, heat transfer and solidification in the mold region were analyzed with 3-dimensional finite difference method (FDM) based on control volume method. A body fitted coordinate system was introduced for the complex geometry of the beam blank. The effects of turbulence and natural convection of molten steel were taken into account in determining the fluid flow in the strand. The thermo-elasto-plastic deformation behavior in the cast strand and the formation of air gap between the solidifying shell and the mold were analyzed by the finite element method (FEM) using the 2-dimensional slice temperature profile calculated by the FDM. The heat flow between the strand and the mold was evaluated by the coupled analysis between the fluid flow-heat transfer analysis and the thermo-elasto-plastic stress analysis. In order to determine the solid fraction in the mushy zone, the microsegregation of solute element was assessed. The effects of fluid flow on the heat transfer, the solidification of steel and the distribution of shell thickness during the casting of the beam blank were simulated. The deformation behavior of the solidifying shell and the possibility of cracking of the strand were also investigated. The recirculating flows were developed in the regions of the web and the flange tip. The impinging of the inlet flow from the nozzle retarded the growing of solidifying shell in the regions of the fillet and the flange. The air gap between the strand and the mold was formed near the region of the corner of the flange tip. At the initial stage of casting, the probability of the surface cracking was high in the regions of the fillet and the flange tip. After the middle stage of casting, the internal cracking was predicted in the regions of the flange tip, and between the fillet and the flange tip. (author) 38

  10. ULE design considerations for a 3m class light weighted mirror blank for E-ELT M5

    Science.gov (United States)

    Fox, Andrew; Hobbs, Tom; Edwards, Mary; Arnold, Matthew; Sawyer, Kent

    2016-07-01

    It is expected that the next generation of large ground based astronomical telescopes will need large fast-steering/tip-tilt mirrors made of ultra-lightweight construction. These fast-steering mirrors are used to continuously correct for atmospheric disturbances and telescope vibrations. An example of this is the European Extremely Large Telescope (E-ELT) M5 lightweight mirror, which is part of the Tip-Tilt/Field-Stabilization Unit. The baseline design for the E-ELT M5 mirror, as presented in the E-ELT Construction Proposal, is a closed-back ULE mirror with a lightweight core using square core cells. Corning Incorporated (Corning) has a long history of manufacturing lightweight mirror blanks using ULE in a closed-back construction, going back to the 1960's, and includes the Hubble Space Telescope primary mirror, Subaru Telescope secondary and tertiary mirrors, the Magellan I and II tertiary mirrors, and Kepler Space Telescope primary mirror, among many others. A parametric study of 1-meter class lightweight mirror designs showed that Corning's capability to seal a continuous back sheet to a light-weighted core structure provides superior mirror rigidity, in a near-zero thermal expansion material, relative to other existing technologies in this design space. Corning has investigated the parametric performance of several design characteristics for a 3-meter class lightweight mirror blank for the E-ELT M5. Finite Element Analysis was performed on several design scenarios to obtain weight, areal density, and first Eigen frequency. This paper presents an overview of Corning ULE and lightweight mirror manufacturing capabilities, the parametric performance of design characteristics for 1-meter class and 3-meter class lightweight mirrors, as well as the manufacturing advantages and disadvantages of those characteristics.

  11. Tailoring superelasticity of soft magnetic materials

    Science.gov (United States)

    Cremer, Peet; Löwen, Hartmut; Menzel, Andreas M.

    2015-10-01

    Embedding magnetic colloidal particles in an elastic polymer matrix leads to smart soft materials that can reversibly be addressed from outside by external magnetic fields. We discover a pronounced nonlinear superelastic stress-strain behavior of such materials using numerical simulations. This behavior results from a combination of two stress-induced mechanisms: a detachment mechanism of embedded particle aggregates and a reorientation mechanism of magnetic moments. The superelastic regime can be reversibly tuned or even be switched on and off by external magnetic fields and thus be tailored during operation. Similarities to the superelastic behavior of shape-memory alloys suggest analogous applications, with the additional benefit of reversible switchability and a higher biocompatibility of soft materials.

  12. Engineering tailored nanoparticles with microbes: quo vadis?

    Science.gov (United States)

    Prasad, Ram; Pandey, Rishikesh; Barman, Ishan

    2016-01-01

    In the quest for less toxic and cleaner methods of nanomaterials production, recent developments in the biosynthesis of nanoparticles have underscored the important role of microorganisms. Their intrinsic ability to withstand variable extremes of temperature, pressure, and pH coupled with the minimal downstream processing requirements provide an attractive route for diverse applications. Yet, controlling the dispersity and facile tuning of the morphology of the nanoparticles of desired chemical compositions remains an ongoing challenge. In this Focus Review, we critically review the advances in nanoparticle synthesis using microbes, ranging from bacteria and fungi to viruses, and discuss new insights into the cellular mechanisms of such formation that may, in the near future, allow complete control over particle morphology and functionalization. In addition to serving as paradigms for cost-effective, biocompatible, and eco-friendly synthesis, microbes hold the promise for a unique template for synthesis of tailored nanoparticles targeted at therapeutic and diagnostic platform technologies. © 2015 Wiley Periodicals, Inc.

  13. Tailored vacuum chambers for ac magnets

    International Nuclear Information System (INIS)

    Harvey, A.

    1985-01-01

    The proposed LAMPF-II accelerator has a 60-Hz booster synchrotron and a 3-Hz main ring. To provide a vacuum enclosure inside the magnets with low eddy-current losses and minimal field distortion, yet capable of carrying rf image currents and providing beam stabilization, we propose an innovative combination pipe. Structurally, the enclosure is high-purity alumina ceramic, which is strong, radiation resistant, and has good vacuum properties. Applied to the chamber are thin, spaced, silver conductors using adapted thick-film technology. The conductor design can be tailored to the stabilization requirements, for example, longitudinal conductors for image currents, circumferential for transverse stabilization. The inside of the chamber has a thin, resistive coating to avoid charge build-up. The overall 60-Hz power loss is less than 100 W/m

  14. Computer-Tailored Intervention for Juvenile Offenders

    Science.gov (United States)

    LEVESQUE, DEBORAH A.; JOHNSON, JANET L.; WELCH, CAROL A.; PROCHASKA, JANICE M.; FERNANDEZ, ANNE C.

    2012-01-01

    Studies assessing the efficacy of juvenile justice interventions show small effects on recidivism and other outcomes. This paper describes the development of a prototype of a multimedia computer-tailored intervention (“Rise Above Your Situation”or RAYS) that relies on an evidence-based model of behavior change, the Transtheoretical Model, and expert system technology to deliver assessments, feedback, printed reports, and counselor reports with intervention ideas. In a feasibility test involving 60 system-involved youths and their counselors, evaluations of the program were favorable: 91.7% of youths agreed that the program could help them make positive changes, and 86.7% agreed that the program could give their counselor helpful information about them. PMID:23264754

  15. Optimizing Tailored Health Promotion for Older Adults

    Science.gov (United States)

    Marcus-Varwijk, Anne Esther; Koopmans, Marg; Visscher, Tommy L. S.; Seidell, Jacob C.; Slaets, Joris P. J.; Smits, Carolien H. M.

    2016-01-01

    Objective: This study explores older adults’ perspectives on healthy living, and their interactions with professionals regarding healthy living. This perspective is necessary for health professionals when they engage in tailored health promotion in their daily work routines. Method: In a qualitative study, 18 semi-structured interviews were carried out with older adults (aged 55-98) living in the Netherlands. The framework analysis method was used to analyze the transcripts. Results: Three themes emerged from the data—(a) healthy living: daily routines and staying active, (b) enacting healthy living: accepting and adapting, (c) interaction with health professionals with regard to healthy living: autonomy and reciprocity. Discussion: Older adults experience healthy living in a holistic way in which they prefer to live active and independent lives. Health professionals should focus on building an equal relationship of trust and focus on positive health outcomes, such as autonomy and self-sufficiency when communicating about healthy living. PMID:28138485

  16. Tailoring CSR Strategy to Company Size?

    Directory of Open Access Journals (Sweden)

    Alexandra ZBUCHEA

    2017-09-01

    Full Text Available Corporate Social Responsibility (CSR is one of the most debated topics in the academic and professional business literature, being analyzed in a myriad of perspectives, from philosophy, to marketing, management practice, managerial strategies or financial impact. The very term of CSR implies that involving with society in a structural way that is part of a business DNA is or should be understood as a characteristic of big size companies (e.g. ‘corporations’. Academic literature and financial reports show a direct relationship between a company size and its CSR budget, therefore some conclusions have been taken that CSR is effective mostly in cases of big budgets and, consequently, of big companies. Academic research also tends to favor large corporations. Most of the literature on CSR is dedicated to large companies. Nevertheless, in the past decade, increasingly more studies have investigated the social responsibility assumed by other types of companies (such as SMEs, by public institutions or by nonprofit organizations. Our present empirical analysis based on structured academic literature review (comprehensive selection of relevant international papers and content analysis demonstrates that CSR should go beyond the classical understanding of the ‘corporation’ concept and that it should be tailored to SMEs as well. Innovation and top management support are the drivers of effective CSR adoption by SMEs, for positive results meeting specific business model requirements, as well as for society. Going beyond social responsibility as a philosophical duty, correctly tailored CSR strategies can be efficient for small and medium enterprises in meeting strategic business objectives.

  17. Synroc tailored waste forms for actinide immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Gregg, Daniel J.; Vance, Eric R. [Australian Nuclear Science and Technology Organisation, Kirrawee (Australia). ANSTOsynroc, Inst. of Materials Engineering

    2017-07-01

    Since the end of the 1970s, Synroc at the Australian Nuclear Science and Technology Organisation (ANSTO) has evolved from a focus on titanate ceramics directed at PUREX waste to a platform waste treatment technology to fabricate tailored glass-ceramic and ceramic waste forms for different types of actinide, high- and intermediate level wastes. The particular emphasis for Synroc is on wastes which are problematic for glass matrices or existing vitrification process technologies. In particular, nuclear wastes containing actinides, notably plutonium, pose a unique set of requirements for a waste form, which Synroc ceramic and glass-ceramic waste forms can be tailored to meet. Key aspects to waste form design include maximising the waste loading, producing a chemically durable product, maintaining flexibility to accommodate waste variations, a proliferation resistance to prevent theft and diversion, and appropriate process technology to produce waste forms that meet requirements for actinide waste streams. Synroc waste forms incorporate the actinides within mineral phases, producing products which are much more durable in water than baseline borosilicate glasses. Further, Synroc waste forms can incorporate neutron absorbers and {sup 238}U which provide criticality control both during processing and whilst within the repository. Synroc waste forms offer proliferation resistance advantages over baseline borosilicate glasses as it is much more difficult to retrieve the actinide and they can reduce the radiation dose to workers compared to borosilicate glasses. Major research and development into Synroc at ANSTO over the past 40 years has included the development of waste forms for excess weapons plutonium immobilization in collaboration with the US and for impure plutonium residues in collaboration with the UK, as examples. With a waste loading of 40-50 wt.%, Synroc would also be considered a strong candidate as an engineered waste form for used nuclear fuel and highly

  18. Molecular tailoring approach for exploring structures, energetics and ...

    Indian Academy of Sciences (India)

    Administrator

    Keywords. Molecular clusters; linear scaling methods; molecular tailoring approach (MTA); Hartree– ..... energy decomposition analysis also performed and which clearly ... through molecular dynamics simulation furnished by. Takeguchi,. 46.

  19. Promoting a Culture of Tailoring for Systems Engineering Policy Expectations

    Science.gov (United States)

    Blankenship, Van A.

    2016-01-01

    NASA's Marshall Space Flight Center (MSFC) has developed an integrated systems engineering approach to promote a culture of tailoring for program and project policy requirements. MSFC's culture encourages and supports tailoring, with an emphasis on risk-based decision making, for enhanced affordability and efficiency. MSFC's policy structure integrates the various Agency requirements into a single, streamlined implementation approach which serves as a "one-stop-shop" for our programs and projects to follow. The engineers gain an enhanced understanding of policy and technical expectations, as well as lesson's learned from MSFC's history of spaceflight and science missions, to enable them to make appropriate, risk-based tailoring recommendations. The tailoring approach utilizes a standard methodology to classify projects into predefined levels using selected mission and programmatic scaling factors related to risk tolerance. Policy requirements are then selectively applied and tailored, with appropriate rationale, and approved by the governing authorities, to support risk-informed decisions to achieve the desired cost and schedule efficiencies. The policy is further augmented by implementation tools and lifecycle planning aids which help promote and support the cultural shift toward more tailoring. The MSFC Customization Tool is an integrated spreadsheet that ties together everything that projects need to understand, navigate, and tailor the policy. It helps them classify their project, understand the intent of the requirements, determine their tailoring approach, and document the necessary governance approvals. It also helps them plan for and conduct technical reviews throughout the lifecycle. Policy tailoring is thus established as a normal part of project execution, with the tools provided to facilitate and enable the tailoring process. MSFC's approach to changing the culture emphasizes risk-based tailoring of policy to achieve increased flexibility, efficiency

  20. Application of Finite Element Method to Analyze the Influences of Process Parameters on the Cut Surface in Fine Blanking Processes by Using Clearance-Dependent Critical Fracture Criteria

    Directory of Open Access Journals (Sweden)

    Phyo Wai Myint

    2018-04-01

    Full Text Available The correct choice of process parameters is important in predicting the cut surface and obtaining a fully-fine sheared surface in the fine blanking process. The researchers used the value of the critical fracture criterion obtained by long duration experiments to predict the conditions of cut surfaces in the fine blanking process. In this study, the clearance-dependent critical ductile fracture criteria obtained by the Cockcroft-Latham and Oyane criteria were used to reduce the time and cost of experiments to obtain the value of the critical fracture criterion. The Finite Element Method (FEM was applied to fine blanking processes to study the influences of process parameters such as the initial compression, the punch and die corner radii and the shape and size of the V-ring indenter on the length of the sheared surface. The effects of stress triaxiality and punch diameters on the cut surface produced by the fine blanking process are also discussed. The verified process parameters and tool geometry for obtaining a fully-fine sheared SPCC surface are described. The results showed that the accurate and stable prediction of ductile fracture initiation can be achieved using the Oyane criterion.

  1. Human Motion Capture Data Tailored Transform Coding.

    Science.gov (United States)

    Junhui Hou; Lap-Pui Chau; Magnenat-Thalmann, Nadia; Ying He

    2015-07-01

    Human motion capture (mocap) is a widely used technique for digitalizing human movements. With growing usage, compressing mocap data has received increasing attention, since compact data size enables efficient storage and transmission. Our analysis shows that mocap data have some unique characteristics that distinguish themselves from images and videos. Therefore, directly borrowing image or video compression techniques, such as discrete cosine transform, does not work well. In this paper, we propose a novel mocap-tailored transform coding algorithm that takes advantage of these features. Our algorithm segments the input mocap sequences into clips, which are represented in 2D matrices. Then it computes a set of data-dependent orthogonal bases to transform the matrices to frequency domain, in which the transform coefficients have significantly less dependency. Finally, the compression is obtained by entropy coding of the quantized coefficients and the bases. Our method has low computational cost and can be easily extended to compress mocap databases. It also requires neither training nor complicated parameter setting. Experimental results demonstrate that the proposed scheme significantly outperforms state-of-the-art algorithms in terms of compression performance and speed.

  2. Tailorable software architectures in the accelerator control system environment

    International Nuclear Information System (INIS)

    Mejuev, Igor; Kumagai, Akira; Kadokura, Eiichi

    2001-01-01

    Tailoring is further evolution of an application after deployment in order to adapt it to requirements that were not accounted for in the original design. End-user tailorability has been extensively researched in applied computer science from HCl and software engineering perspectives. Tailorability allows coping with flexibility requirements, decreasing maintenance and development costs of software products. In general, dynamic or diverse software requirements constitute the need for implementing end-user tailorability in computer systems. In accelerator physics research the factor of dynamic requirements is especially important, due to frequent software and hardware modifications resulting in correspondingly high upgrade and maintenance costs. In this work we introduce the results of feasibility study on implementing end-user tailorability in the software for accelerator control system, considering the design and implementation of distributed monitoring application for 12 GeV KEK Proton Synchrotron as an example. The software prototypes used in this work are based on a generic tailoring platform (VEDICI), which allows decoupling of tailoring interfaces and runtime components. While representing a reusable application-independent framework, VEDICI can be potentially applied for tailoring of arbitrary compositional Web-based applications

  3. Tailoring self-assembled monolayers at the electrochemical interface

    Indian Academy of Sciences (India)

    Administrator

    (SAMs) for functionalisation with different receptors, catalytic materials, biomolecules, enzymes, anti- gen-antibody, etc for various applications. ... and tailoring of SAMs by incorporation of suitable recognition elements. ... compatible with most organic functional groups and ...... the interfacial architecture can be tailored using.

  4. Can we still dream when the mind is blank? Sleep and dream mentations in auto-activation deficit.

    Science.gov (United States)

    Leu-Semenescu, Smaranda; Uguccioni, Ginevra; Golmard, Jean-Louis; Czernecki, Virginie; Yelnik, Jerome; Dubois, Bruno; Forgeot d'Arc, Baudouin; Grabli, David; Levy, Richard; Arnulf, Isabelle

    2013-10-01

    Bilateral damage to the basal ganglia causes auto-activation deficit, a neuropsychological syndrome characterized by striking apathy, with a loss of self-driven behaviour that is partially reversible with external stimulation. Some patients with auto-activation deficit also experience a mental emptiness, which is defined as an absence of any self-reported thoughts. We asked whether this deficit in spontaneous activation of mental processing may be reversed during REM sleep, when dreaming activity is potentially elicited by bottom-up brainstem stimulation on the cortex. Sleep and video monitoring over two nights and cognitive tests were performed on 13 patients with auto-activation deficit secondary to bilateral striato-pallidal lesions and 13 healthy subjects. Dream mentations were collected from home diaries and after forced awakenings in non-REM and REM sleep. The home diaries were blindly analysed for length, complexity and bizarreness. A mental blank during wakefulness was complete in six patients and partial in one patient. Four (31%) patients with auto-activation deficit (versus 92% of control subjects) reported mentations when awakened from REM sleep, even when they demonstrated a mental blank during the daytime (n = 2). However, the patients' dream reports were infrequent, short, devoid of any bizarre or emotional elements and tended to be less complex than the dream mentations of control subjects. The sleep duration, continuity and stages were similar between the groups, except for a striking absence of sleep spindles in 6 of 13 patients with auto-activation deficit, despite an intact thalamus. The presence of spontaneous dreams in REM sleep in the absence of thoughts during wakefulness in patients with auto-activation deficit supports the idea that simple dream imagery is generated by brainstem stimulation and is sent to the sensory cortex. However, the lack of complexity in these dream mentations suggests that the full dreaming process (scenario

  5. Does tailoring really make a difference? : the development and evaluation of tailored interventions aimed at benzodiazepine cessation

    NARCIS (Netherlands)

    Wolde, Geeske Brecht ten

    2008-01-01

    Because of the problems associated with chronic benzodiazepine use, there is impetus to prevent and reduce chronic benzodiazepine use. The overall aim was to develop a 'tailor-made' intervention in order to reduce chronic use. Before developing tailored patient education, it is first of all

  6. Ceramic laminates with tailored residual stresses

    Directory of Open Access Journals (Sweden)

    Baudín, C.

    2009-12-01

    Full Text Available Severe environments imposed by new technologies demand new materials with better properties and ensured reliability. The intrinsic brittleness of ceramics has forced scientists to look for new materials and processing routes to improve the mechanical behaviour of ceramics in order to allow their use under severe thermomechanical conditions. The laminate approach has allowed the fabrication of a new family of composite materials with strength and reliability superior to those of monolithic ceramics with microstructures similar to those of the constituent layers. The different ceramic laminates developed since the middle 1970´s can be divided in two large groups depending on whether the development of residual stresses between layers is the main design tool. This paper reviews the developments in the control and tailoring of residual stresses in ceramic laminates. The tailoring of the thickness and location of layers in compression can lead to extremely performing structures in terms of strength values and reliability. External layers in compression lead to the strengthening of the structure. When relatively thin and highly compressed layers are located inside the material, threshold strength, crack bifurcation and crack arrest during fracture occur.

    Las severas condiciones de trabajo de las nuevas aplicaciones tecnológicas exigen el uso de materiales con mejores propiedades y alta fiabilidad. La potencialidad de uso de materiales frágiles, como los cerámicos, en estas aplicaciones exige el desarrollo de nuevos materiales y métodos de procesamiento que mejoren su comportamiento mecánico. El concepto de material laminado ha permitido la fabricación de una nueva familia de materiales con tensiones de fractura y fiabilidad superiores a las de materiales monolíticos con microestructuras similares a las de las láminas que conforman el laminado. Los distintos materiales laminados desarrollados desde mediados de los años 70 se pueden

  7. Thin tailored composite wing for civil tiltrotor

    Science.gov (United States)

    Rais-Rohani, Masoud

    1994-01-01

    The tiltrotor aircraft is a flight vehicle which combines the efficient low speed (i.e., take-off, landing, and hover) characteristics of a helicopter with the efficient cruise speed of a turboprop airplane. A well-known example of such vehicle is the Bell-Boeing V-22 Osprey. The high cruise speed and range constraints placed on the civil tiltrotor require a relatively thin wing to increase the drag-divergence Mach number which translates into lower compressibility drag. It is required to reduce the wing maximum thickness-to-chord ratio t/c from 23% (i.e., V-22 wing) to 18%. While a reduction in wing thickness results in improved aerodynamic efficiency, it has an adverse effect on the wing structure and it tends to reduce structural stiffness. If ignored, the reduction in wing stiffness leads to susceptibility to aeroelastic and dynamic instabilities which may consequently cause a catastrophic failure. By taking advantage of the directional stiffness characteristics of composite materials the wing structure may be tailored to have the necessary stiffness, at a lower thickness, while keeping the weight low. The goal of this study is to design a wing structure for minimum weight subject to structural, dynamic and aeroelastic constraints. The structural constraints are in terms of strength and buckling allowables. The dynamic constraints are in terms of wing natural frequencies in vertical and horizontal bending and torsion. The aeroelastic constraints are in terms of frequency placement of the wing structure relative to those of the rotor system. The wing-rotor-pylon aeroelastic and dynamic interactions are limited in this design study by holding the cruise speed, rotor-pylon system, and wing geometric attributes fixed. To assure that the wing-rotor stability margins are maintained a more rigorous analysis based on a detailed model of the rotor system will need to ensue following the design study. The skin-stringer-rib type architecture is used for the wing

  8. Tailoring magnetism by light-ion irradiation

    International Nuclear Information System (INIS)

    Fassbender, J; Ravelosona, D; Samson, Y

    2004-01-01

    Owing to their reduced dimensions, the magnetic properties of ultrathin magnetic films and multilayers, e.g. magnetic anisotropies and exchange coupling, often depend strongly on the surface and interface structure. In addition, chemical composition, crystallinity, grain sizes and their distribution govern the magnetic behaviour. All these structural properties can be modified by light-ion irradiation in an energy range of 5-150 keV due to the energy loss of the ions in the solid along their trajectory. Consequently the magnetic properties can be tailored by ion irradiation. Similar effects can also be observed using Ga + ion irradiation, which is the common ion source in focused ion beam lithography. Examples of ion-induced modifications of magnetic anisotropies and exchange coupling are presented. This review is limited to radiation-induced structural changes giving rise to a modification of magnetic parameters. Ion implantation is discussed only in special cases. Due to the local nature of the interaction, magnetic patterning without affecting the surface topography becomes feasible, which may be of interest in applications. The main patterning technique is homogeneous ion irradiation through masks. Focused ion beam and ion projection lithography are usually only relevant for larger ion masses. The creation of magnetic feature sizes below 50 nm is shown. In contrast to topographic nanostructures the surrounding area of these nanostructures can be left ferromagnetic, leading to new phenomena at their mutual interface. Most of the material systems discussed here are important for technological applications. The main areas are magnetic data storage applications, such as hard magnetic media with a large perpendicular magnetic anisotropy or patterned media with an improved signal to noise ratio and magnetic sensor elements. It will be shown that light-ion irradiation has many advantages in the design of new material properties and in the fabrication technology of

  9. Automatically producing tailored web materials for public administration

    Science.gov (United States)

    Colineau, Nathalie; Paris, Cécile; Vander Linden, Keith

    2013-06-01

    Public administration organizations commonly produce citizen-focused, informational materials describing public programs and the conditions under which citizens or citizen groups are eligible for these programs. The organizations write these materials for generic audiences because of the excessive human resource costs that would be required to produce personalized materials for everyone. Unfortunately, generic materials tend to be longer and harder to understand than materials tailored for particular citizens. Our work explores the feasibility and effectiveness of automatically producing tailored materials. We have developed an adaptive hypermedia application system that automatically produces tailored informational materials and have evaluated it in a series of studies. The studies demonstrate that: (1) subjects prefer tailored materials over generic materials, even if the tailoring requires answering a set of demographic questions first; (2) tailored materials are more effective at supporting subjects in their task of learning about public programs; and (3) the time required to specify the demographic information on which the tailoring is based does not significantly slow down the subjects in their information seeking task.

  10. Blank Paper Scares Me.

    Science.gov (United States)

    Swope, Darcy M.

    1984-01-01

    One way art teachers can motivate emotionally disturbed 5- to 12-year-old children who suffer from fear of failure and poor self-concepts is through the sharing of a book or record. A relaxed, safe atmosphere established through readings or songs allows children with special needs to experiment and express themselves through art. (RM)

  11. Semiconductor quantum optics with tailored photonic nanostructures

    International Nuclear Information System (INIS)

    Laucht, Arne

    2011-01-01

    the understanding of coupling phenomena between excitons in self-assembled quantum dots and optical modes of tailored photonic nanostructures realized on the basis of two-dimensional photonic crystals. While we highlight the potential for advanced applications in the direction of quantum optics and quantum computation, we also identify some of the challenges which will need to be overcome on the way. (orig.)

  12. [Tailored cranioplasty using CAD-CAM technology].

    Science.gov (United States)

    Vitanovics, Dusán; Major, Ottó; Lovas, László; Banczerowski, Péter

    2014-11-30

    The majority of cranial defects are results of surgical intervention. The defect must be covered within resonable period of time usually after 4-6 week given the fact that the replacement of bone improve the brain circulation. Number of surgical techniques and materials are available to perform cranioplasty. Due to favorable properties we chosed ultra high molecular weight polyethylene as material. In this paper the authors show a procedure which allows tailored artificial bone replacement using state of art medical and engineering techniques. between 2004 and 2012, 19 patients were operated on cranial bone defect and a total of 22 3D custom-designed implants were implanted. The average age of patients was 35.4 years. In 12 patients we performed primary cranioplasty, while seven patients had the replacement at least once. Later the implants had to be removed due to infection or other causes (bone necrosis, fracture). All patients had native and bone-windowed 1 mm resolution CT. The 3D design was made using the original CT images and with design program. Computer controlled lathe was used to prepare a precise-fitting model. During surgery, the defect was exposed and the implant was fixed to normal bone using mini titanium plates and screws. All of our patients had control CT at 3, 6 and 12 months after surgery and at the same time neurological examination. Twenty-one polyethylene and one titanium implants were inserted. The average follow-up of the patients was 21.5 months, ranged from two to 96 months. We follow 12 patients (63.15%) more than one year. No intraoperative implant modifications had to be made. Each of the 22 implant exactly matched the bone defect proved by CT scan. No one of our patients reported aesthetic problems and we did not notice any kind of aesthetic complication. We had short term complication in three cases due to cranioplasty, subdural, epidural haemorrhage and skin defect. Polyethylene is in all respects suitable for primary and secondary

  13. Semiconductor quantum optics with tailored photonic nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Laucht, Arne

    2011-06-15

    single photon emission into the waveguide. The results obtained during the course of this thesis contribute significantly to the understanding of coupling phenomena between excitons in self-assembled quantum dots and optical modes of tailored photonic nanostructures realized on the basis of two-dimensional photonic crystals. While we highlight the potential for advanced applications in the direction of quantum optics and quantum computation, we also identify some of the challenges which will need to be overcome on the way. (orig.)

  14. Tailored Materials for High Efficiency CIDI Engines

    Energy Technology Data Exchange (ETDEWEB)

    Grant, G.J.; Jana, S.

    2012-03-30

    The overall goal of the project, Tailored Materials for High Efficiency Compression Ignition Direct Injection (CIDI) Engines, is to enable the implementation of new combustion strategies, such as homogeneous charge compression ignition (HCCI), that have the potential to significantly increase the energy efficiency of current diesel engines and decrease fuel consumption and environmental emissions. These strategies, however, are increasing the demands on conventional engine materials, either from increases in peak cylinder pressure (PCP) or from increases in the temperature of operation. The specific objective of this project is to investigate the application of a new material processing technology, friction stir processing (FSP), to improve the thermal and mechanical properties of engine components. The concept is to modify the surfaces of conventional, low-cost engine materials. The project focused primarily on FSP in aluminum materials that are compositional analogs to the typical piston and head alloys seen in small- to mid-sized CIDI engines. Investigations have been primarily of two types over the duration of this project: (1) FSP of a cast hypoeutectic Al-Si-Mg (A356/357) alloy with no introduction of any new components, and (2) FSP of Al-Cu-Ni alloys (Alloy 339) by physically stirring-in various quantities of carbon nanotubes/nanofibers or carbon fibers. Experimental work to date on aluminum systems has shown significant increases in fatigue lifetime and stress-level performance in aluminum-silicon alloys using friction processing alone, but work to demonstrate the addition of carbon nanotubes and fibers into aluminum substrates has shown mixed results due primarily to the difficulty in achieving porosity-free, homogeneous distributions of the particulate. A limited effort to understand the effects of FSP on steel materials was also undertaken during the course of this project. Processed regions were created in high-strength, low-alloyed steels up to 0.5 in

  15. Zinc Finger Takes on a Whole New Meaning: Reducing and Monitoring Zinc Blanks in the Isotope Lab

    Science.gov (United States)

    Wilkes, E. B.; Wasylenki, L. E.; Anbar, A. D.

    2010-12-01

    In terms of avoiding contamination, zinc is one of the most difficult elements to study isotopically. The reason for this is that zinc stearate is a very common mold release agent in the production of plastics, including those most often used in isotope geochemistry clean labs. While polyethylene bottles, polypropylene centrifuge tubes, pipette tips, and Kimwipes are all potential sources of contaminant zinc, by far the largest amount of zinc is introduced to the laboratory by gloves. Most items can be effectively rid of zinc by soaking in dilute hydrochloric acid, but gloves cannot be cleaned easily, and use of gloves can quickly lead to contamination on many surfaces throughout the lab. We recently conducted several experiments in which dissolved zinc was partly adsorbed onto synthetic Mn oxyhydroxide particles. The dissolved and adsorbed pools were separated by filtration, purified with ion exchange chemistry, and analyzed for isotope composition by MC-ICP-MS. We used a commercially purchased ICP standard solution both as our standard (delta66/64Zn = 0) and as the source of the zinc in the experiments. Whenever gloves were worn during purification, process blanks contained as much as 150 ng Zn, and both the dissolved and adsorbed pools of zinc came out enriched in heavy isotopes relative to the starting pool, contrary to our expectation of mass balance. When gloves were not worn, blanks were brands of vinyl gloves, including one brand recommended to us for being “low” in zinc, measured +10‰ relative to our standard. We therefore concluded that glove zinc contaminated most of our experimental samples. We were only able to see such clear evidence of contamination because (1) we were doing an experiment in which we expected one light and one heavy pool of zinc compared to our standard, and (2) we happened to use an ICP standard solution for delta = 0 that is strongly enriched in light isotopes relative to both brands of gloves. We caution others who measure

  16. Formability of dual-phase steels in deep drawing of rectangular parts: Influence of blank thickness and die radius

    Science.gov (United States)

    López, Ana María Camacho; Regueras, José María Gutiérrez

    2017-10-01

    The new goals of automotive industry related with environment concerns, the reduction of fuel emissions and the security requirements have driven up to new designs which main objective is reducing weight. It can be achieved through new materials such as nano-structured materials, fibre-reinforced composites or steels with higher strength, among others. Into the last group, the Advance High Strength Steels (AHSS) and particularly, dual-phase steels are in a predominant situation. However, despite of their special characteristics, they present issues related to their manufacturability such as springback, splits and cracks, among others. This work is focused on the deep drawing processof rectangular shapes, a very usual forming operation that allows manufacturing several automotive parts like oil pans, cases, etc. Two of the main parameters in this process which affect directly to the characteristics of final product are blank thickness (t) and die radius (Rd). Influence of t and Rd on the formability of dual-phase steels has been analysed considering values typically used in industrial manufacturing for a wide range of dual-phase steels using finite element modelling and simulation; concretely, the influence of these parameters in the percentage of thickness reduction pt(%), a quite important value for manufactured parts by deep drawing operations, which affects to its integrity and its service behaviour. Modified Morh Coulomb criteria (MMC) has been used in order to obtain Fracture Forming Limit Diagrams (FFLD) which take into account an important failure mode in dual-phase steels: shear fracture. Finally, a relation between thickness reduction percentage and studied parameters has been established fordual-phase steels, obtaining a collection of equations based on Design of Experiments (D.O.E) technique, which can be useful in order to predict approximate results.

  17. Experimental verification of tailor welded joining partners for hot stamping and analytical modeling of TWBs rheological constitutive in austenitic state

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Bingtao, E-mail: tbtsh@hotmail.com [School of Materials Science and Engineering, Shandong Jianzhu University, Shandong, Jinan 250101 (China); State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Hunan, Changsha 410082 (China); Yuan, Zhengjun; Cheng, Gang [School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101 (China); Huang, Lili; Zheng, Wei [School of Materials Science and Engineering, Shandong Jianzhu University, Shandong, Jinan 250101 (China); Xie, Hui [State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Hunan, Changsha 410082 (China)

    2013-11-15

    Hot stamping of quenchable ultra high strength steels currently represents a standard forming technology in the automotive industry for the manufacture of safety and crash relevant components. Recently, hot stamping of Tailor-Welded Blanks (TWBs) is proposed to meet the environmental and safety requirements by supplying car structural body components with functionally optimized and tailored mechanical properties. In this paper, an appropriate partner material for the quenchenable boron steel B1500HS based on the phase transformation and deformation behavior under process relevant conditions is determined. It is generally accepted that the mechanical properties for joint partner after quenching process should meet the following requirements. The value of yield strength (YS) should be between 350 and 500 MPa. The ultimate tensile strength (UTS) should be within the limits of 500–650 MPa, and the total elongation (TEL) until rupture should be higher than 13%. Two kinds of High Strength Low Alloy (HSLA) cold rolled steels B340LA and B410LA are chosen for verification of which one is appropriate as joint partner. Microhardness is measured and metallographic is investigated on different base materials and corresponding weld seams. It is pointed out that the B340LA steel is an appropriate joint partner with ideal thermal and mechanical properties. An optimized Arrhenius constitutive law is implemented to improve the characterization and description of the mechanical properties of the base and joint partner, as well as the weld seam in austenitic state. The comparisons with simplified Hensel–Spittel constitutive model show the optimized Arrhenius constitutive law describes the experimental data fairly well.

  18. Experimental verification of tailor welded joining partners for hot stamping and analytical modeling of TWBs rheological constitutive in austenitic state

    International Nuclear Information System (INIS)

    Tang, Bingtao; Yuan, Zhengjun; Cheng, Gang; Huang, Lili; Zheng, Wei; Xie, Hui

    2013-01-01

    Hot stamping of quenchable ultra high strength steels currently represents a standard forming technology in the automotive industry for the manufacture of safety and crash relevant components. Recently, hot stamping of Tailor-Welded Blanks (TWBs) is proposed to meet the environmental and safety requirements by supplying car structural body components with functionally optimized and tailored mechanical properties. In this paper, an appropriate partner material for the quenchenable boron steel B1500HS based on the phase transformation and deformation behavior under process relevant conditions is determined. It is generally accepted that the mechanical properties for joint partner after quenching process should meet the following requirements. The value of yield strength (YS) should be between 350 and 500 MPa. The ultimate tensile strength (UTS) should be within the limits of 500–650 MPa, and the total elongation (TEL) until rupture should be higher than 13%. Two kinds of High Strength Low Alloy (HSLA) cold rolled steels B340LA and B410LA are chosen for verification of which one is appropriate as joint partner. Microhardness is measured and metallographic is investigated on different base materials and corresponding weld seams. It is pointed out that the B340LA steel is an appropriate joint partner with ideal thermal and mechanical properties. An optimized Arrhenius constitutive law is implemented to improve the characterization and description of the mechanical properties of the base and joint partner, as well as the weld seam in austenitic state. The comparisons with simplified Hensel–Spittel constitutive model show the optimized Arrhenius constitutive law describes the experimental data fairly well

  19. Can Deterrence Be Tailored? Strategic Forum, Number 225, January 2007

    National Research Council Canada - National Science Library

    Bunn, M. E

    2007-01-01

    .... The Bush administration has outlined a concept for tailored deterrence to address the distinctive challenges posed by advanced military competitors, regional powers armed with weapons of mass destruction (WMD...

  20. Effects of tailoring ingredients in auditory persuasive health messages on fruit and vegetable intake

    NARCIS (Netherlands)

    Elbert, Sarah P.; Dijkstra, Arie; Rozema, Andrea

    2017-01-01

    Objective: Health messages can be tailored by applying different tailoring ingredients, among which personalisation, feedback and adaptation. This experiment investigated the separate effects of these tailoring ingredients on behaviour in auditory health persuasion. Furthermore, the moderating

  1. Tailoring of EIA-649-1: Definition of Major (Class I) Engineering Change Proposal

    Science.gov (United States)

    2015-05-15

    MISSILE SYSTEMS CENTER TAILORING TAILORING OF EIA -649-1: DEFINITION OF MAJOR (CLASS I) ENGINEERING CHANGE PROPOSAL APPROVED FOR...PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED 1 Tailoring of EIA -649-1: Definition of Major (Class I) ECP. 1. Intent of this Tailoring Document...This tailoring document remedies a requirements gap in the industry consensus standard, EIA -649-1: 2015. Specifically, this tailoring provides a

  2. Proposal for the award of two contracts for the supply of fine-blanked austenitic steel collars for the cold masses of the LHC superconducting dipole magnets

    CERN Document Server

    1999-01-01

    This document concerns the award of two contracts for the supply of 12 500 000 fine-blanked austenitic steel collars in three different shapes and of two different types for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in fourteen Member States and one firm in Japan, a call for tenders (IT-2469/LHC/LHC) was sent on 3 June 1999 to eleven firms in five Member States and one firm in Japan. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - MALVESTITI (IT) for the supply of up to 7 812 500 fine-blanked austenitic steel collars, which represents 5/8 of the total quantity required for the cold masses of the LHC superconducting dipole magnets, for a total amount of up to 6 908 509 Swiss francs, subject to revision for contractual deliveries after 31 December 2001, with an option for the supply of up to 4 687 500 additional fine-blanked austenitic steel collars, wh...

  3. Candidate isolated neutron stars and other optically blank x-ray fields identified from the rosat all-sky and sloan digital sky surveys

    Energy Technology Data Exchange (ETDEWEB)

    Agueros, Marcel A.; Anderson, Scott F.; /Washington U., Seattle, Astron. Dept.; Margon, Bruce; /Baltimore, Space Telescope Sci.; Haberl, Frank; Voges, Wolfgang; /Garching,; Annis, James; /Fermilab; Schneider, Donald P.; /Penn State U., Astron. Astrophys.; Brinkmann, Jonathan; /Apache Point Observ.

    2005-11-01

    Only seven radio-quiet isolated neutron stars (INSs) emitting thermal X rays are known, a sample that has yet to definitively address such fundamental issues as the equation of state of degenerate neutron matter. We describe a selection algorithm based on a cross-correlation of the ROSAT All-Sky Survey (RASS) and the Sloan Digital Sky Survey (SDSS) that identifies X-ray error circles devoid of plausible optical counterparts to the SDSS g {approx} 22 magnitudes limit. We quantitatively characterize these error circles as optically blank; they may host INSs or other similarly exotic X-ray sources such as radio-quiet BL Lacs, obscured AGN, etc. Our search is an order of magnitude more selective than previous searches for optically blank RASS error circles, and excludes the 99.9% of error circles that contain more common X-ray-emitting subclasses. We find 11 candidates, nine of which are new. While our search is designed to find the best INS candidates and not to produce a complete list of INSs in the RASS, it is reassuring that our number of candidates is consistent with predictions from INS population models. Further X-ray observations will obtain pinpoint positions and determine whether these sources are entirely optically blank at g {approx} 22, supporting the presence of likely isolated neutron stars and perhaps enabling detailed follow-up studies of neutron star physics.

  4. Employee Perceptions of Workplace Health Promotion Programs: Comparison of a Tailored, Semi-Tailored, and Standardized Approach.

    Science.gov (United States)

    Street, Tamara D; Lacey, Sarah J

    2018-04-28

    In the design of workplace health promotion programs (WHPPs), employee perceptions represent an integral variable which is predicted to translate into rate of user engagement (i.e., participation) and program loyalty. This study evaluated employee perceptions of three workplace health programs promoting nutritional consumption and physical activity. Programs included: (1) an individually tailored consultation with an exercise physiologist and dietitian; (2) a semi-tailored 12-week SMS health message program; and (3) a standardized group workshop delivered by an expert. Participating employees from a transport company completed program evaluation surveys rating the overall program, affect, and utility of: consultations ( n = 19); SMS program ( n = 234); and workshops ( n = 86). Overall, participants’ affect and utility evaluations were positive for all programs, with the greatest satisfaction being reported in the tailored individual consultation and standardized group workshop conditions. Furthermore, mode of delivery and the physical presence of an expert health practitioner was more influential than the degree to which the information was tailored to the individual. Thus, the synergy in ratings between individually tailored consultations and standardized group workshops indicates that low-cost delivery health programs may be as appealing to employees as tailored, and comparatively high-cost, program options.

  5. Novel concept for measurement of global blank draw-in when deep drawing outer skin automotive components

    Science.gov (United States)

    Kraft, M.; Bürgel, U.

    2017-09-01

    Modern press shops in the automotive industry have to deal with many challenges. One challenge is to achieve a consistent part quality. In order to reach this target, modern press systems and tools are equipped with several types of sensors. For example, there are sensors to measure characteristic values of blanks or sensors to measure the temperature in the tools. Often several sensors are used simultaneously. A significant parameter for determining the quality of draw panels is the draw-in amount. Previously, it was only possible to measure selective points of the draw-in amount due to sensors in the tools. All the known sensors have disadvantages, for example, they are exposed to wearing or susceptible to contamination. In this paper, a sensor system will be introduced that allows the measurement of the global draw-in amount of a drawn panel. Here, the draw-in amount is not measured in the draw die, it is measured during the transportation of the part to the following operation. Within the short transport time the part can be fully covered by an optical system. This leads to a multitude of advantages compared with previously known systems. For example, it is no longer necessary to equip every tool with sensor technology to measure the draw-in amount. Now it is sufficient to equip every press line with a single system to measure the draw-in. This fact leads not only to lower costs, it also simplifies the tool design. In addition, the risk of contamination of the sensor system is greatly reduced. The paper will also introduce an actuator that was built to locally vary the blankholder forces for a sheet metal forming process. Furthermore, an FEM model is presented that allows the determination of the effective range of these actuators. With the knowledge from the FEM simulation, an approach for an open loop control is presented. With this approach, the press shops at Opel are developing a control procedure in order to influence the stamping process positively.

  6. Shape-Tailored Features and their Application to Texture Segmentation

    KAUST Repository

    Khan, Naeemullah

    2014-04-01

    Texture Segmentation is one of the most challenging areas of computer vision. One reason for this difficulty is the huge variety and variability of textures occurring in real world, making it very difficult to quantitatively study textures. One of the key tools used for texture segmentation is local invariant descriptors. Texture consists of textons, the basic building block of textures, that may vary by small nuisances like illumination variation, deformations, and noise. Local invariant descriptors are robust to these nuisances making them beneficial for texture segmentation. However, grouping dense descriptors directly for segmentation presents a problem: existing descriptors aggregate data from neighborhoods that may contain different textured regions, making descriptors from these neighborhoods difficult to group, leading to significant errors in segmentation. This work addresses this issue by proposing dense local descriptors, called Shape-Tailored Features, which are tailored to an arbitrarily shaped region, aggregating data only within the region of interest. Since the segmentation, i.e., the regions, are not known a-priori, we propose a joint problem for Shape-Tailored Features and the regions. We present a framework based on variational methods. Extensive experiments on a new large texture dataset, which we introduce, show that the joint approach with Shape-Tailored Features leads to better segmentations over the non-joint non Shape-Tailored approach, and the method out-performs existing state-of-the-art.

  7. Building Tailorable Hypermedia Systems: The embedded-interpreter approach

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Malhotra, Jawahar

    1994-01-01

    This paper discusses an approach for developing dynamically tailorable hypermedia systems in an object-oriented environment. The approach is aimed at making applications developed in compiled languages like Beta and C++ tailorable at run-time. The approach is based on use of: 1) a hypermedia...... application framework (DEVISE Hyper-media), and 2) an embeddable interpreter for the framework language. A specific hypermedia system is instantiated from the framework with the interpreter embedded in the executable. The specific hypermedia system has a number of “open points” which can be filled via......-type. The paper describes the framework and illustrates how the interpreter is integrated. It describes steps involved in tailoring a specific hypermedia system with a new drawing media-type, where graphical objects can be endpoints for links. Since the hypermedia framework uses a persistent object...

  8. Evaluation of volatile organic compound (VOC) blank data and application of study reporting levels to groundwater data collected for the California GAMA Priority Basin Project, May 2004 through September 2010

    Science.gov (United States)

    Fram, Miranda S.; Olsen, Lisa D.; Belitz, Kenneth

    2012-01-01

    Volatile organic compounds (VOCs) were analyzed in quality-control samples collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. From May 2004 through September 2010, a total of 2,026 groundwater samples, 211 field blanks, and 109 source-solution blanks were collected and analyzed for concentrations of 85 VOCs. Results from analyses of these field and source-solution blanks and of 2,411 laboratory instrument blanks during the same time period were used to assess the quality of data for the 2,026 groundwater samples. Eighteen VOCs were detected in field blanks or source-solution blanks: acetone, benzene, bromodichloromethane, 2-butanone, carbon disulfide, chloroform, 1,1-dichloroethene, dichloromethane, ethylbenzene, tetrachloroethene, styrene, tetrahydrofuran, toluene, trichloroethene, trichlorofluoromethane, 1,2,4-trimethylbenzene, m- and p-xylenes, and o-xylene. The objective of the evaluation of the VOC-blank data was to determine if study reporting levels (SRLs) were needed for any of the VOCs detected in blanks to ensure the quality of the data from groundwater samples. An SRL is equivalent to a raised reporting level that is used in place of the reporting level used by the analyzing laboratory [long‑term method detection level (LT-MDL) or laboratory reporting level (LRL)] to reduce the probability of reporting false-positive detections. Evaluation of VOC-blank data was done in three stages: (1) identification of a set of representative quality‑control field blanks (QCFBs) to be used for calculation of SRLs and identification of VOCs amenable to the SRL approach, (2) evaluation of potential sources of contamination to blanks and groundwater samples by VOCs detected in field blanks, and (3) selection of appropriate SRLs from among four potential SRLs for VOCs detected in field blanks and application of those SRLs to the groundwater data. An important conclusion from this study is that to ensure the

  9. Tailoring stimuli-responsive delivery system driven by metal–ligand coordination bonding

    Directory of Open Access Journals (Sweden)

    Liang H

    2017-04-01

    Full Text Available Hongshan Liang,1–3 Bin Zhou,4 Yun He,1–3 Yaqiong Pei,1–3 Bin Li,1–3 Jing Li1–31College of Food Science and Technology, Huazhong Agricultural University, 2Key Laboratory of Environment Correlative Dietology, Huazhong Agricultural University, Ministry of Education, 3Functional Food Engineering & Technology Research Center of Hubei Province, Wuhan, Hubei, 4College of Food Science and Technology, Shanghai Ocean University, LinGang New City, Shanghai, People’s Republic of ChinaAbstract: In this study, a novel coordination bonding system based on metal–tannic acid (TA architecture on zein/carboxymethyl chitosan (CMCS nanoparticles (NPs was investigated for the pH-responsive drug delivery. CMCS has been reported to coat on zein NPs as delivery vehicles for drugs or nutrients in previous studies. The cleavage of either the “metal–TA” or “NH2–metal” coordination bonds resulted in significant release of guest molecules with high stimulus sensitivity, especially in mild acidic conditions. The prepared metal–TA-coated zein/CMCS NPs (zein/CMCS-TA/metal NPs could maintain particle size in cell culture medium at 37°C, demonstrating good stability compared with zein/CMCS NPs. In vitro release behavior of doxorubicin hydrochloride (DOX-loaded metal–TA film-coated zein/CMCS NPs (DOX-zein/CMCS-TA/metal NPs showed fine pH responsiveness tailored by the ratio of zein to CMCS as well as the metal species and feeding concentrations. The blank zein/CMCS-TA/metal NPs (NPs-TA/metal were of low cytotoxicity, while a high cytotoxic activity of DOX-zein/CMCS-TA/metal NPs (DOX-NPs-TA/metal against HepG2 cells was demonstrated by in vitro cell assay. Confocal laser scanning microscopy (CLSM and flow cytometry were combined to study the uptake efficiency of DOX-NPs or DOX-NPs-TA/metal. This system showed significant potential as a highly versatile and potent platform for drug delivery. Keywords: coordination bonding, pH-responsive, high stimulus

  10. Microstructural gradients in thin hard coatings -- tailor-made

    DEFF Research Database (Denmark)

    Pantleon, Karen; Oettel, Heinrich

    1998-01-01

    ) alternating sputtering with and without substrate voltage and (c) pulsed bias voltage. On the basis of X-ray diffraction measurements, it is demonstrated that residual stress gradients and texture gradients can be designed tailor-made. Furthermore, results of microhardness measurements and scratch tests...

  11. Tailorable Trimethyl chitosans as adjuvant for intranasal immunization

    NARCIS (Netherlands)

    Verheul, R.J.

    2010-01-01

    Tailorable Trimethyl Chitosans as Adjuvant for Intranasal Immunization Active vaccination has proven to be the most (cost) effective tool in the fight against infectious diseases. Nowadays, most vaccines are administered via parenteral injection. However, the risk of contaminated needles and need

  12. Enabling Tailored Music Programs in Elementary Schools: An Australian Exemplar

    Science.gov (United States)

    McFerran, Katrina Skewes; Crooke, Alexander Hew Dale

    2014-01-01

    Participation in meaningful school music programs is the right of all children. Although music education is widely supported by policy, significant gaps exist in practice in most developed Western countries. These gaps mean the extrinsic and intrinsic benefits associated with participation in tailored programs are not equally available to all…

  13. Tailored Cloze: Improved with Classical Item Analysis Techniques.

    Science.gov (United States)

    Brown, James Dean

    1988-01-01

    The reliability and validity of a cloze procedure used as an English-as-a-second-language (ESL) test in China were improved by applying traditional item analysis and selection techniques. The 'best' test items were chosen on the basis of item facility and discrimination indices, and were administered as a 'tailored cloze.' 29 references listed.…

  14. Comparing tailored and untailored text messages for smoking cessation

    DEFF Research Database (Denmark)

    Skov-Ettrup, L S; Ringgaard, L W; Dalum, P

    2014-01-01

    The aim was to compare the effectiveness of untailored text messages for smoking cessation to tailored text messages delivered at a higher frequency. From February 2007 to August 2009, 2030 users of an internet-based smoking cessation program with optional text message support aged 15-25 years were...... of text messages increases quit rates among young smokers....

  15. Tailoring Dispersion properties of photonic crystal waveguides by topology optimization

    DEFF Research Database (Denmark)

    Stainko, Roman; Sigmund, Ole

    2007-01-01

    based design updates. The goal of the optimization process is to come up with slow light, zero group velocity dispersion photonic waveguides or photonic waveguides with tailored dispersion properties for dispersion compensation purposes. Two examples concerning reproduction of a specific dispersion...

  16. Excellent bonding behaviour of novel surface-tailored fibre ...

    Indian Academy of Sciences (India)

    Administrator

    tured completely before pull-out, leading to full utilization of its tensile strength, and ... Composite rods; surface tailoring; cementitious matrix; pull-out test; bonding characteristics. 1. ... machine (Lloyd LR50K) at a speed of 0∙5 mm/min with a.

  17. Promotion of Active Aging using a tailored recommendation system

    NARCIS (Netherlands)

    Cabrita, M.; Vollenbroek-Hutten, Miriam Marie Rosé

    Active Aging deals with the support and integration of the elderly population in a society focusing on improving physical and mental well-being. Persuasive technology provides solutions for tailored interventions aiming at maintaining an active lifestyle. The present paper introduces the initial

  18. Understanding the impact of graphene sheet tailoring on the ...

    Indian Academy of Sciences (India)

    Tailoring the channel decreases mobility and transmission probability to a great ... AGNR was used throughout the text so N denotes the number of dimer lines. Figure 2. .... ber of dimer lines and z is a positive integer) and through local density ...

  19. Application-Tailored I/O with Streamline

    NARCIS (Netherlands)

    de Bruijn, W.J.; Bos, H.J.; Bal, H.E.

    2011-01-01

    Streamline is a stream-based OS communication subsystem that spans from peripheral hardware to userspace processes. It improves performance of I/O-bound applications (such as webservers and streaming media applications) by constructing tailor-made I/O paths through the operating system for each

  20. Analysis, design and elastic tailoring of composite rotor blades

    Science.gov (United States)

    Rehfield, Lawrence W.; Atilgan, Ali R.

    1987-01-01

    The development of structural models for composite rotor blades is summarized. The models are intended for use in design analysis for the purpose of exploring the potential of elastic tailoring. The research was performed at the Center for Rotary Wing Aircraft Technology.

  1. Tailoring Small IT Projects in the Project Planning Phase

    Science.gov (United States)

    Mulhearn, Michael F.

    2011-01-01

    Project management (PM) and systems engineering (SE) are essential skills in information technology (IT). There is an abundance of information available detailing the comprehensive bodies of knowledge, standards, and best practices. Despite the volume of information, there is surprisingly little information about how to tailor PM and SE tasks for…

  2. Aerodynamic tailoring of the Learjet Model 60 wing

    Science.gov (United States)

    Chandrasekharan, Reuben M.; Hawke, Veronica M.; Hinson, Michael L.; Kennelly, Robert A., Jr.; Madson, Michael D.

    1993-01-01

    The wing of the Learjet Model 60 was tailored for improved aerodynamic characteristics using the TRANAIR transonic full-potential computational fluid dynamics (CFD) code. A root leading edge glove and wing tip fairing were shaped to reduce shock strength, improve cruise drag and extend the buffet limit. The aerodynamic design was validated by wind tunnel test and flight test data.

  3. LPWA using supersonic gas jet with tailored density profile

    Science.gov (United States)

    Kononenko, O.; Bohlen, S.; Dale, J.; D'Arcy, R.; Dinter, M.; Erbe, J. H.; Indorf, G.; di Lucchio, L.; Goldberg, L.; Gruse, J. N.; Karstensen, S.; Libov, V.; Ludwig, K.; Martinez de La Ossa, A.; Marutzky, F.; Niroula, A.; Osterhoff, J.; Quast, M.; Schaper, L.; Schwinkendorf, J.-P.; Streeter, M.; Tauscher, G.; Weichert, S.; Palmer, C.; Horbatiuk, Taras

    2016-10-01

    Laser driven plasma wakefield accelerators have been explored as a potential compact, reproducible source of relativistic electron bunches, utilising an electric field of many GV/m. Control over injection of electrons into the wakefield is of crucial importance in producing stable, mono-energetic electron bunches. Density tailoring of the target, to control the acceleration process, can also be used to improve the quality of the bunch. By using gas jets to provide tailored targets it is possible to provide good access for plasma diagnostics while also producing sharp density gradients for density down-ramp injection. OpenFOAM hydrodynamic simulations were used to investigate the possibility of producing tailored density targets in a supersonic gas jet. Particle-in-cell simulations of the resulting density profiles modelled the effect of the tailored density on the properties of the accelerated electron bunch. Here, we present the simulation results together with preliminary experimental measurements of electron and x-ray properties from LPWA experiments using gas jet targets and a 25 TW, 25 fs Ti:Sa laser system at DESY.

  4. The Promise of Tailoring Incentives for Healthy Behaviors.

    Science.gov (United States)

    Kullgren, Jeffrey T; Williams, Geoffrey C; Resnicow, Kenneth; An, Lawrence C; Rothberg, Amy; Volpp, Kevin G; Heisler, Michele

    2016-01-01

    To describe how tailoring financial incentives for healthy behaviors to employees' goals, values, and aspirations might improve the efficacy of incentives. We integrate insights from self-determination theory (SDT) with principles from behavioral economics in the design of financial incentives by linking how incentives could help meet an employee's life goals, values, or aspirations. Tailored financial incentives could be more effective than standard incentives in promoting autonomous motivation necessary to initiate healthy behaviors and sustain them after incentives are removed. Previous efforts to improve the design of financial incentives have tested different incentive designs that vary the size, schedule, timing, and target of incentives. Our strategy for tailoring incentives builds on strong evidence that difficult behavior changes are more successful when integrated with important life goals and values. We outline necessary research to examine the effectiveness of this approach among at-risk employees. Instead of offering simple financial rewards for engaging in healthy behaviors, existing programs could leverage incentives to promote employees' autonomous motivation for sustained health improvements. Effective application of these concepts could lead to programs more effective at improving health, potentially at lower cost. Our approach for the first time integrates key insights from SDT, behavioral economics, and tailoring to turn an extrinsic reward for behavior change into an internalized, self-sustaining motivator for long-term engagement in risk-reducing behaviors.

  5. The Effect of Reading Involvement through Open-Ended Strategy vs. Fill-in- the- Blanks Strategy on Young EFL Learners’ Reading Comprehension Ability

    Directory of Open Access Journals (Sweden)

    Rita Salehi Sepehr

    2014-11-01

    Full Text Available The present study investigated the extent to which an instructional framework of integrating strategy instruction (open-ended strategy and fill-in-the blanks strategy with motivation- support affected on reading result for young EFL learners. The central area of exploration included a comparison among three approaches to reading instruction: First, fill-in-the blanks strategy intervention; second, open-ended strategy intervention; and last, a control group which received the conventional reading strategies. The participants were sampled from amongst a group of seventy-seven pre-intermediate EFL learners in a language school in Tehran- Iran based on convenient sampling technique. For the sake of measurement, the researchers administered PET and CELT along with reading strategy based-test to quantify the participants’ current level of knowledge as well as the degree of achievement after treatment. For measurement’s sake, different types of tests such as PET, reading comprehension test (CELT, and reading strategy based- test were employed to quantify the participants’ current level of knowledge as well as the degree of achievement before and after instruction. The result of the present study indicated that the experimental groups had a significant improvement over the control group. Also, the level of learners’ reading engagement during classroom work mediated the instructional effects on reading outcomes. The results of this study can be to the benefit of both EFL and ESL teachers to teach reading comprehension using the student's critical mind as well as critical involvement in the reading tasks.

  6. Aerogels in Chemical Engineering: Strategies Toward Tailor-Made Aerogels.

    Science.gov (United States)

    Smirnova, Irina; Gurikov, Pavel

    2017-06-07

    The present review deals with recent advances in the rapidly growing field of aerogel research and technology. The major focus of the review lies in approaches that allow tailoring of aerogel properties to meet application-driven requirements. The decisive properties of aerogels are discussed with regard to existing and potential application areas. Various tailoring strategies, such as modulation of the pore structure, coating, surface modification, and post-treatment, are illustrated by results of the last decade. In view of commercialization of aerogel-based products, a panorama of current industrial aerogel suppliers is given, along with a discussion of possible alternative sources for raw materials and precursors. Finally, growing points and perspectives of the aerogel field are summarized.

  7. Field profile tailoring in a-Si:H radiation detectors

    International Nuclear Information System (INIS)

    Fujieda, I.; Cho, G.; Conti, M.; Drewery, J.; Kaplan, S.N.; Perez-Mendez, V.; Quershi, S.; Wildermuth, D.; Street, R.A.

    1990-03-01

    The capability of tailoring the field profile in reverse-biased a-Si:H diodes by doping and/or manipulating electrode shapes opens a way to many interesting device structures. Charge collection in a-Si:H radiation detectors is improved for high LET particle detection by inserting thin doped layers into the i-layer of the usual p-i-n diode. This buried p-i-n structure enables us to apply higher reverse-bias and the electric field is enhanced in the mid i-layer. Field profiles of the new structures are calculated and the improved charge collection process is discussed. Also discussed is the possibility of field profile tailoring by utilizing the fixed space charges in i-layers and/or manipulating electrode shapes of the reverse-biased p-i-n diodes. 10 refs., 7 figs

  8. Highly tailorable thiol-ene based emulsion-templated monoliths

    DEFF Research Database (Denmark)

    Lafleur, J. P.; Kutter, J. P.

    2014-01-01

    The attractive surface properties of thiol-ene polymers combined with their ease of processing make them ideal substrates in many bioanalytical applications. We report the synthesis of highly tailorable emulsion-templated porous polymers and beads in microfluidic devices based on off-stoichiometr......The attractive surface properties of thiol-ene polymers combined with their ease of processing make them ideal substrates in many bioanalytical applications. We report the synthesis of highly tailorable emulsion-templated porous polymers and beads in microfluidic devices based on off......-stoichiometry thiolene chemistry. The method allows monolith synthesis and anchoring inside thiol-ene microchannels in a single step. Variations in the monomer stoichiometric ratios and/or amount of porogen used allow for the creation of extremely varied polymer morphologies, from foam-like materials to dense networks...

  9. Conservatism implications of shock test tailoring for multiple design environments

    Science.gov (United States)

    Baca, Thomas J.; Bell, R. Glenn; Robbins, Susan A.

    1987-01-01

    A method for analyzing shock conservation in test specifications that have been tailored to qualify a structure for multiple design environments is discussed. Shock test conservation is qualified for shock response spectra, shock intensity spectra and ranked peak acceleration data in terms of an Index of Conservation (IOC) and an Overtest Factor (OTF). The multi-environment conservation analysis addresses the issue of both absolute and average conservation. The method is demonstrated in a case where four laboratory tests have been specified to qualify a component which must survive seven different field environments. Final judgment of the tailored test specification is shown to require an understanding of the predominant failure modes of the test item.

  10. Quantum condensation from a tailored exciton population in a microcavity

    International Nuclear Information System (INIS)

    Eastham, P. R.; Phillips, R. T.

    2009-01-01

    An experiment is proposed on the coherent quantum dynamics of a semiconductor microcavity containing quantum dots. Modeling the experiment using a generalized Dicke model, we show that a tailored excitation pulse can create an energy-dependent population of excitons, which subsequently evolves to a quantum condensate of excitons and photons. The population is created by a generalization of adiabatic rapid passage and then condenses due to a dynamical analog of the BCS instability.

  11. Towards collaborative filtering recommender systems for tailored health communications.

    Science.gov (United States)

    Marlin, Benjamin M; Adams, Roy J; Sadasivam, Rajani; Houston, Thomas K

    2013-01-01

    The goal of computer tailored health communications (CTHC) is to promote healthy behaviors by sending messages tailored to individual patients. Current CTHC systems collect baseline patient "profiles" and then use expert-written, rule-based systems to target messages to subsets of patients. Our main interest in this work is the study of collaborative filtering-based CTHC systems that can learn to tailor future message selections to individual patients based explicit feedback about past message selections. This paper reports the results of a study designed to collect explicit feedback (ratings) regarding four aspects of messages from 100 subjects in the smoking cessation support domain. Our results show that most users have positive opinions of most messages and that the ratings for all four aspects of the messages are highly correlated with each other. Finally, we conduct a range of rating prediction experiments comparing several different model variations. Our results show that predicting future ratings based on each user's past ratings contributes the most to predictive accuracy.

  12. A porous ceramic membrane tailored high-temperature supercapacitor

    Science.gov (United States)

    Zhang, Xin; He, Benlin; Zhao, Yuanyuan; Tang, Qunwei

    2018-03-01

    The supercapacitor that can operate at high-temperature are promising for markedly increase in capacitance because of accelerated charge movement. However, the state-of-the-art polymer-based membranes will decompose at high temperature. Inspired by solid oxide fuel cells, we present here the experimental realization of high-temperature supercapacitors (HTSCs) tailored with porous ceramic separator fabricated by yttria-stabilized zirconia (YSZ) and nickel oxide (NiO). Using activated carbon electrode and supporting electrolyte from potassium hydroxide (KOH) aqueous solution, a category of symmetrical HTSCs are built in comparison with a conventional polymer membrane based device. The dependence of capacitance performance on temperature is carefully studied, yielding a maximized specific capacitance of 272 F g-1 at 90 °C for the optimized HTSC tailored by NiO/YSZ membrane. Moreover, the resultant HTSC has relatively high durability when suffer repeated measurement over 1000 cycles at 90 °C, while the polymer membrane based supercapacitor shows significant reduction in capacitance at 60 °C. The high capacitance along with durability demonstrates NiO/YSZ membrane tailored HTSCs are promising in future advanced energy storage devices.

  13. Flavin-catalyzed redox tailoring reactions in natural product biosynthesis.

    Science.gov (United States)

    Teufel, Robin

    2017-10-15

    Natural products are distinct and often highly complex organic molecules that constitute not only an important drug source, but have also pushed the field of organic chemistry by providing intricate targets for total synthesis. How the astonishing structural diversity of natural products is enzymatically generated in biosynthetic pathways remains a challenging research area, which requires detailed and sophisticated approaches to elucidate the underlying catalytic mechanisms. Commonly, the diversification of precursor molecules into distinct natural products relies on the action of pathway-specific tailoring enzymes that catalyze, e.g., acylations, glycosylations, or redox reactions. This review highlights a selection of tailoring enzymes that employ riboflavin (vitamin B2)-derived cofactors (FAD and FMN) to facilitate unusual redox catalysis and steer the formation of complex natural product pharmacophores. Remarkably, several such recently reported flavin-dependent tailoring enzymes expand the classical paradigms of flavin biochemistry leading, e.g., to the discovery of the flavin-N5-oxide - a novel flavin redox state and oxygenating species. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Manufacturing of tailored tubes with a process integrated heat treatment

    Science.gov (United States)

    Hordych, Illia; Boiarkin, Viacheslav; Rodman, Dmytro; Nürnberger, Florian

    2017-10-01

    The usage of work-pieces with tailored properties allows for reducing costs and materials. One example are tailored tubes that can be used as end parts e.g. in the automotive industry or in domestic applications as well as semi-finished products for subsequent controlled deformation processes. An innovative technology to manufacture tubes is roll forming with a subsequent inductive heating and adapted quenching to obtain tailored properties in the longitudinal direction. This processing offers a great potential for the production of tubes with a wide range of properties, although this novel approach still requires a suited process design. Based on experimental data, a process simulation is being developed. The simulation shall be suitable for a virtual design of the tubes and allows for gaining a deeper understanding of the required processing. The model proposed shall predict microstructural and mechanical tube properties by considering process parameters, different geometries, batch-related influences etc. A validation is carried out using experimental data of tubes manufactured from various steel grades.

  15. Tailor cutting of crystalline solar cells by laser micro jet

    Science.gov (United States)

    Bruckert, F.; Pilat, E.; Piron, P.; Torres, P.; Carron, B.; Richerzhagen, B.; Pirot, M.; Monna, R.

    2012-03-01

    Coupling a laser into a hair thin water micro jet (Laser Micro Jet, LMJ) for cutting applications offers a wide range of processes that are quite unique. As the laser beam is guided by internal reflections inside of a liquid cylinder, the cuts are naturally straight and do not reflect any divergence as otherwise occurs with an unguided laser beam. Furthermore, having a liquid media at the point of contact ensures a fast removal of heat and eventual debris ensuring clean cuts, which are free of any burrs. Many applications have indeed been developed for a large variety of materials, which are as different as e.g. diamond, silicon, aluminum, ceramic and hard metals. The photovoltaic industry has enjoyed in the last decades tremendous growth rates, which are still projected into the future. We focus here on the segment of Building Integrated PV (BIPV), which requests tailored solutions to actual buildings and not-one-fits-it-all standardized modules. Having the option to tailor cut solar cells opens a new field of BIPV applications. For the first time, finished crystalline solar cells have been LMJ cut into predetermined shapes. First results show that the cut is clean and neat. Preliminary solar performance measurements are positive. This opens a new avenue of tailored made modules instead of having to rely on the one-fits-alloy approach used so far.

  16. Are we there yet? An examination of online tailored health communication.

    Science.gov (United States)

    Suggs, L Suzanne; McIntyre, Chris

    2009-04-01

    Increasingly, the Internet is playing an important role in consumer health and patient-provider communication. Seventy-three percent of American adults are now online, and 79% have searched for health information on the Internet. This study provides a baseline understanding of the extent to which health consumers are able to find tailored communication online. It describes the current behavioral focus, the channels being used to deliver the tailored content, and the level of tailoring in online-tailored communication. A content analysis of 497 health Web sites found few examples of personalized, targeted, or tailored health sites freely available online. Tailored content was provided in 13 Web sites, although 15 collected individual data. More health risk assessment (HRA) sites included tailored feedback than other topics. The patterns that emerged from the analysis demonstrate that online health users can access a number of Web sites with communication tailored to their needs.

  17. Improving the Quality of Cast Ingot for the Production of Defect-Free Rolled and Polished Blanks of Silver-Copper Coinage Alloy

    Science.gov (United States)

    Chakrabarti, Debalay; Chakrabarti, Ajit Kumar; Roy, Sanat Kumar

    2018-05-01

    The causes of defect generation in Ag-7.5 wt% Cu coinage alloy billets and in rolled and polished blanks were evaluated in this paper. Microstructural and compositional study of the as-cast billets indicated that excessive formation of gas-porosity and shrinkage cavity was responsible for crack formation during rolling. Carbon pick-up from charcoal flux cover used during melting, formation of CuS inclusions due to high-S content and rapid work-hardening also contributed to cracking during rolling. In order to prevent the defect generation, several measures were adopted. Those measures significantly reduced the defect generation and improved the surface luster of the trial rolled strips.

  18. SECTIONAL AREA CALCULATION OF MATERIAL REMOVED FROM BLANK WHILE FORMING SPACE BETWEEN TWO TEETH OF SATELLITE GEAR OF PLANETARY PIN TOOTH REDUCER

    Directory of Open Access Journals (Sweden)

    N. G. Yankevich

    2009-01-01

    Full Text Available One of the most important values while forming gear wheels is a material section area Sс which is to be removed by a tool in the process of forming a space between two teeth in one pass. Cutting resistance which is proportional  to section area of  the layer to be cut and, correspondingly, a thermodynamic intensity in the polishing zone depend on Sс value.The paper proposes relations for calculation of a material section area Sс which is to be removed from a blank while forming a space between two teeth of a satellite gear of a planetary pin tooth reducer.Measurements being made in the AutoCAD packet have shown that any corrections of the profile do not make a significant influence on a section area Sс.

  19. Procedure for independently estimating blanks and uncertainties for measured values of 90Sr and 137Cs concentrations in the Atlantic Ocean

    International Nuclear Information System (INIS)

    Kupferman, S.L.; Livingston, H.D.

    1979-01-01

    A procedure has been developed for independently estimating blanks and measurement uncertainties for measured values of 90 Sr and 137 CS concentrations in the Atlantic Ocean. The procedure depends on delineation of a region in the Atlantic Ocean which has never contained measurable quantities of these fission products. Such a region is defined. A simple model, with supporting data, is used to show that reported 137 Cs inventories in deep ocean sediments could have accumulated without ever raising concentrations of 137 Cs in this tracer-free volume above minimum detectable limits. Several examples are presented to show that the use of the procedure results in a substantial improvement in the quality of 90 Sr and 137 Cs data. The method is applicable to any laboratory that has determined 9 πSr and 137 Cs concentrations in samples collected from within the tracer-free volume. 10 refs

  20. Happy crisis tests hospitals' PR plan. Septuplets' arrival swamps Iowa hospitals with national, international media. Blank Children's Hospital, Iowa Methodist Medical Center, Des Moines.

    Science.gov (United States)

    1998-01-01

    The public relations staff believed the birth of healthy septuplets would become a human interest story for local media. But the staff was stunned at the outpouring of international and national media knocking at their front doors. The staff of both Iowa Methodist Medical Center and Blank Children's Hospital in Des Moines, Iowa, organized a communications plan for 14 official press conferences, constant updates to the media and a website to handle ongoing inquiries from the public. As a result, the story of the McCaughey septuplets was shown in more than 10,000 television stories around the world. The hospitals received more than 36,000 magazine and newspaper articles. The public relations staff not only fielded more than 2,000 phone calls in the days following the Nov. 19 birth, but more than 15 major networks parked their vehicles and satellite dishes in front of the hospital.

  1. Immunogenicity and safety of high-dose hepatitis B vaccine among drug users: A randomized, open-labeled, blank-controlled trial.

    Science.gov (United States)

    Feng, Yongliang; Shi, Jing; Gao, Linying; Yao, Tian; Feng, Dan; Luo, Dan; Li, Zhansheng; Zhang, Yawei; Wang, Fuzhen; Cui, Fuqiang; Li, Li; Liang, Xiaofeng; Wang, Suping

    2017-06-03

    Due to the low uptake, adherence, and completion of vaccination among drug users, and their compromised immune responses to hepatitis B vaccination, the current practice of hepatitis B vaccination may not provide optimal protection. The aim of this study was to evaluate the immunogenicity and safety of 60 µg and 20 µg hepatitis B vaccines among drug users. A randomized, open-labeled, blank-controlled trial was conducted among drug users at 2 drug rehabilitation centers in China. The eligible participants were drug users who were serologically negative for the hepatitis B surface antigen (HBsAg) and the hepatitis B surface antibody (anti-HBs). Participants were randomized in a ratio of 1:1:1 to receive 20 µg (IM20 group) or 60 µg (IM60 group) of hepatitis B vaccine or blank control at months 0, 1, and 6, and followed at months 6, 7, and 12. Seroconversion rates of 94.7% and 92.6% were observed in IM20 and IM60 groups at month 7, and correspondingly decreased to 89.5% and 91.7% respectively at month 12. The IM60 group showed significantly higher geometric mean concentrations (GMCs) of anti-HBs (2022.5 and 676.7 mIU mL-1) than the IM20 group did (909.6 and 470.5 mIU mL-1) at months 7 and 12 (P B vaccines showed good immunogenicity among the drug users.

  2. Hardware Tailored Linear Algebra for Implicit Integrators in Embedded NMPC

    DEFF Research Database (Denmark)

    Frison, Gianluca; Quirynen, Rien; Zanelli, Andrea

    2017-01-01

    . In the case of stiff or implicitly defined dynamics, implicit integration schemes are typically preferred. This paper proposes a tailored implementation of the necessary linear algebra routines (LU factorization and triangular solutions), in order to allow for a considerable computational speedup...... of such integrators. In particular, the open-source BLASFEO framework is presented as a library of efficient linear algebra routines for small to medium-scale embedded optimization applications. Its performance is illustrated on the nonlinear optimal control example of a chain of masses. The proposed library allows...

  3. Tailored solar optics for maximal optical tolerance and concentration

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, Alex [Department of Solar Energy and Environmental Physics, Blaustein Institutes for Desert Research, Ben-Gurion University of the Negev, Sede Boqer Campus (Israel); Gordon, Jeffrey M. [Department of Solar Energy and Environmental Physics, Blaustein Institutes for Desert Research, Ben-Gurion University of the Negev, Sede Boqer Campus (Israel); The Pearlstone Center for Aeronautical Engineering Studies, Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beersheva (Israel)

    2011-02-15

    Recently identified fundamental classes of dual-mirror double-tailored nonimaging optics have the potential to satisfy the pragmatic exigencies of concentrator photovoltaics. Via a comprehensive survey of their parameter space, including raytrace verification, we identify champion high-concentration high-efficiency designs that offer unprecedented optical tolerance (i.e., sensitivity to off-axis orientation) - a pivotal figure-of-merit with a basic bound that depends on concentration, exit angle, and effective solar angular radius. For comparison, results for the best corresponding dual-mirror aplanatic concentrators are also presented. (author)

  4. Tailoring spin-orbit torque in diluted magnetic semiconductors

    KAUST Repository

    Li, Hang; Wang, Xuhui; Doǧan, Fatih; Manchon, Aurelien

    2013-01-01

    We study the spin orbit torque arising from an intrinsic linear Dresselhaus spin-orbit coupling in a single layer III-V diluted magnetic semiconductor. We investigate the transport properties and spin torque using the linear response theory, and we report here: (1) a strong correlation exists between the angular dependence of the torque and the anisotropy of the Fermi surface; (2) the spin orbit torque depends nonlinearly on the exchange coupling. Our findings suggest the possibility to tailor the spin orbit torque magnitude and angular dependence by structural design.

  5. Tailoring silver nanoparticle construction using dendrimer templated silica networks

    International Nuclear Information System (INIS)

    Liu Xiaojun; Kakkar, Ashok

    2008-01-01

    We have examined the role of the internal environment of dendrimer templated silica networks in tailoring the construction of silver nanoparticle assemblies. Silica networks from which 3,5-dihydroxybenzyl alcohol based dendrimer templates have been completely removed, slowly wet with an aqueous solution of silver acetate. The latter then reacts with internal silica silanol groups, leading to chemisorption of silver ions, followed by the growth of silver oxide nanoparticles. Silica network constructed using generation 4 dendrimer contains residual dendrimer template, and mixes with aqueous silver acetate solution easily. Upon chemisorption, silver ions get photolytically reduced to silver metal under a stabilizing dendrimer environment, leading to the formation of silver metal nanoparticles

  6. Design of an aeroelastically tailored 10 MW wind turbine rotor

    DEFF Research Database (Denmark)

    Zahle, Frederik; Tibaldi, Carlo; Pavese, Christian

    2016-01-01

    This work presents an integrated multidisciplinary wind turbine optimization framework utilizing state-of-the-art aeroelastic and structural tools, capable of simultaneous design of the outer geometry and internal structure of the blade. The framework is utilized to design a 10 MW rotor constrained...... not to exceed the design loads of an existing reference wind turbine. The results show that through combined geometric tailoring of the internal structure and aerodynamic shape of the blade it is possible to achieve significant passive load alleviation that allows for a 9% longer blade with an increase in AEP...

  7. Tailoring spin-orbit torque in diluted magnetic semiconductors

    KAUST Repository

    Li, Hang

    2013-05-16

    We study the spin orbit torque arising from an intrinsic linear Dresselhaus spin-orbit coupling in a single layer III-V diluted magnetic semiconductor. We investigate the transport properties and spin torque using the linear response theory, and we report here: (1) a strong correlation exists between the angular dependence of the torque and the anisotropy of the Fermi surface; (2) the spin orbit torque depends nonlinearly on the exchange coupling. Our findings suggest the possibility to tailor the spin orbit torque magnitude and angular dependence by structural design.

  8. Tailoring the wettability of nanocrystalline TiO 2 films

    Science.gov (United States)

    Liang, Qiyu; Chen, Yan; Fan, Yuzun; Hu, Yong; Wu, Yuedong; Zhao, Ziqiang; Meng, Qingbo

    2012-01-01

    The water contact angle (WCA) of nanocrystalline TiO2 films was adjusted by fluoroalkylsilane (FAS) modification and photocatalytic lithography. FAS modification made the surface hydrophobic with the WCA up to ∼156°, while ultraviolet (UV) irradiation changed surface to hydrophilic with the WCA down to ∼0°. Both the hydrophobicity and hydrophilicity were enhanced by surface roughness. The wettability can be tailored by varying the concentration of FAS solution and soaking time, as well as the UV light intensity and irradiation time. Additionally, with the help of photomasks, hydrophobic-hydrophilic micropatterns can be fabricated and manifested via area-selective deposition of polystyrene particles.

  9. Radiative properties tailoring of grating by comb-drive microactuator

    International Nuclear Information System (INIS)

    Jiao, Y.; Liu, L.H.; Liu, L.J.; Hsu, P.-F.

    2014-01-01

    Micro-scale grating structures are widely researched in recent years. Although micro-scale fabrication technology is highly advanced today, with grating aspect ratio greater than 25:1 being achievable some fabrication requirements, such as fine groove processing, are still challenging. Comb-drive microactuator is proposed in this paper to be utilized on simple binary grating structures for tailoring or modulating spectral radiation properties by active adjustment. The rigorous coupled-wave analysis (RCWA) is used to calculate the absorptance of proposed structures and to investigate the impacts brought by the geometry and displacement of comb-drive microactuator. The results show that the utilization of comb-drive microactuator on grating improves the absorptance of simple binary grating while avoiding the difficulty fine groove processing. Spectral radiation property tailoring after gratings are fabricated becomes possible with the comb-drive microactuator structure. - Highlights: • A microscale grating structure with comb-driven microactuator is proposed. • The movement of microactuator changes peak absorptance resonance wavelength. • Geometric and displacement effects of comb finger on absorptance are investigated. • Both RCWA and LC circuit models are developed to predict the resonance wavelength. • Resonance frequency equations of LC circuits allow quick design analysis

  10. Sasang constitutional medicine as a holistic tailored medicine.

    Science.gov (United States)

    Kim, Jong Yeol; Pham, Duong Duc

    2009-09-01

    Sasang constitutional medicine (SCM) is a unique traditional Korean therapeutic alternative form of medicine. Based on the Yin and Yang theory and on Confucianism, humans are classified into four constitutions. These differ in terms of (i) sensitivity to certain groups of herbs and medicines, (ii) equilibrium among internal organic functions, (iii) physical features and (iv) psychological characteristics. We propose that two main axes in the physiopathology of SCM (food intake/waste discharge and consuming/storing Qi and body fluids) are equivalent to the process of internal-external exchange and catabolism/anabolism in modern physiology, respectively. We then used this hypothesis to discuss the physiological and pathological principles of SCM. Constitution-based medicine is based on the theory that some medicinal herbs and remedies are only appropriate for certain constitutions and can cause adverse effects in others. The constitutional approach of SCM share the same vision as tailored medicine; an individualized therapy that can minimize the risk of adverse reaction while increasing the efficacy and an individualized self-regulation that can help prevent specific susceptible chronic disease and live healthily. There is still a long way to this goal for both SCM and tailored medicine, but we may benefit from systems approaches such as systems biology. We suggest that constitutional perspective of SCM and our hypothesis of two main processes may provide a novel insight for further studies.

  11. Sasang Constitutional Medicine as a Holistic Tailored Medicine

    Directory of Open Access Journals (Sweden)

    Jong Yeol Kim

    2009-01-01

    Full Text Available Sasang constitutional medicine (SCM is a unique traditional Korean therapeutic alternative form of medicine. Based on the Yin and Yang theory and on Confucianism, humans are classified into four constitutions. These differ in terms of (i sensitivity to certain groups of herbs and medicines, (ii equilibrium among internal organic functions, (iii physical features and (iv psychological characteristics. We propose that two main axes in the physiopathology of SCM (food intake/waste discharge and consuming/storing Qi and body fluids are equivalent to the process of internal–external exchange and catabolism/anabolism in modern physiology, respectively. We then used this hypothesis to discuss the physiological and pathological principles of SCM. Constitution-based medicine is based on the theory that some medicinal herbs and remedies are only appropriate for certain constitutions and can cause adverse effects in others. The constitutional approach of SCM share the same vision as tailored medicine; an individualized therapy that can minimize the risk of adverse reaction while increasing the efficacy and an individualized self-regulation that can help prevent specific susceptible chronic disease and live healthily. There is still a long way to this goal for both SCM and tailored medicine, but we may benefit from systems approaches such as systems biology. We suggest that constitutional perspective of SCM and our hypothesis of two main processes may provide a novel insight for further studies.

  12. Tailoring thermal conductivity via three-dimensional porous alumina.

    Science.gov (United States)

    Abad, Begoña; Maiz, Jon; Ruiz-Clavijo, Alejandra; Caballero-Calero, Olga; Martin-Gonzalez, Marisol

    2016-12-09

    Three-dimensional anodic alumina templates (3D-AAO) are an astonishing framework with open highly ordered three-dimensional skeleton structures. Since these templates are architecturally different from conventional solids or porous templates, they teem with opportunities for engineering thermal properties. By establishing the mechanisms of heat transfer in these frameworks, we aim to create materials with tailored thermal properties. The effective thermal conductivity of an empty 3D-AAO membrane was measured. As the effective medium theory was not valid to extract the skeletal thermal conductivity of 3D-AAO, a simple 3D thermal conduction model was developed, based on a mixed series and parallel thermal resistor circuit, giving a skeletal thermal conductivity value of approximately 1.25 W·m -1 ·K -1 , which matches the value of the ordinary AAO membranes prepared from the same acid solution. The effect of different filler materials as well as the variation of the number of transversal nanochannels and the length of the 3D-AAO membrane in the effective thermal conductivity of the composite was studied. Finally, the thermal conductivity of two 3D-AAO membranes filled with cobalt and bismuth telluride was also measured, which was in good agreement with the thermal model predictions. Therefore, this work proved this structure as a powerful approach to tailor thermal properties.

  13. Supporting Multiple Cognitive Processing Styles Using Tailored Support Systems

    International Nuclear Information System (INIS)

    Tuan Q. Tran; Karen M. Feigh; Amy R. Pritchett

    2007-01-01

    According to theories of cognitive processing style or cognitive control mode, human performance is more effective when an individual's cognitive state (e.g., intuition/scramble vs. deliberate/strategic) matches his/her ecological constraints or context (e.g., utilize intuition to strive for a 'good-enough' response instead of deliberating for the 'best' response under high time pressure). Ill-mapping between cognitive state and ecological constraints are believed to lead to degraded task performance. Consequently, incorporating support systems which are designed to specifically address multiple cognitive and functional states e.g., high workload, stress, boredom, and initiate appropriate mitigation strategies (e.g., reduce information load) is essential to reduce plant risk. Utilizing the concept of Cognitive Control Models, this paper will discuss the importance of tailoring support systems to match an operator's cognitive state, and will further discuss the importance of these ecological constraints in selecting and implementing mitigation strategies for safe and effective system performance. An example from the nuclear power plant industry illustrating how a support system might be tailored to support different cognitive states is included

  14. Oromucosal multilayer films for tailor-made, controlled drug delivery.

    Science.gov (United States)

    Lindert, Sandra; Breitkreutz, Jörg

    2017-11-01

    The oral mucosa has recently become increasingly important as an alternative administration route for tailor-made, controlled drug delivery. Oromucosal multilayer films, assigned to the monograph oromucosal preparations in the Ph.Eur. may be a promising dosage form to overcome the requirements related to this drug delivery site. Areas covered: We provide an overview of multilayer films as drug delivery tools, and discuss manufacturing processes and characterization methods. We focus on the suitability of characterization methods for particular requirements of multilayer films. A classification was performed covering indication areas and APIs incorporated in multilayer film systems for oromucosal use in order to provide a summary of data published in this field. Expert opinion: The shift in drug development to high molecular weight drugs will influence the field of pharmaceutical development and delivery technologies. For a high number of indication areas, such as hormonal disorders, cardiovascular diseases or local treatment of infections, the flexible layer design of oromucosal multilayer films provides a promising option for tailor-made, controlled delivery of APIs to or through defined surfaces in the oral cavity. However, there is a lack of discriminating or standardized testing methods to assess the quality of multilayer films in a reliable way.

  15. Broadband energy harvesting using acoustic black hole structural tailoring

    International Nuclear Information System (INIS)

    Zhao, Liuxian; Semperlotti, Fabio; Conlon, Stephen C

    2014-01-01

    This paper explores the concept of an acoustic black hole (ABH) as a main design framework for performing dynamic structural tailoring of mechanical systems for vibration energy harvesting applications. The ABH is an integral feature embedded in the host structure that allows for a smooth reduction of the phase velocity, theoretically approaching zero, while minimizing the reflected energy. This mechanism results in structural areas with high energy density that can be effectively exploited to develop enhanced vibration-based energy harvesting. Fully coupled electro-mechanical models of an ABH tapered structure with surface mounted piezo-transducers are developed to numerically simulate the response of the system to both steady state and transient excitations. The design performances are numerically evaluated using structural intensity data as well as the instantaneous voltage/power and energy output produced by the piezo-transducer network. Results show that the dynamically tailored structural design enables a drastic increase in the harvested energy as compared to traditional structures, both under steady state and transient excitation conditions. (papers)

  16. Tailoring thermal conductivity via three-dimensional porous alumina

    Science.gov (United States)

    Abad, Begoña; Maiz, Jon; Ruiz-Clavijo, Alejandra; Caballero-Calero, Olga; Martin-Gonzalez, Marisol

    2016-01-01

    Three-dimensional anodic alumina templates (3D-AAO) are an astonishing framework with open highly ordered three-dimensional skeleton structures. Since these templates are architecturally different from conventional solids or porous templates, they teem with opportunities for engineering thermal properties. By establishing the mechanisms of heat transfer in these frameworks, we aim to create materials with tailored thermal properties. The effective thermal conductivity of an empty 3D-AAO membrane was measured. As the effective medium theory was not valid to extract the skeletal thermal conductivity of 3D-AAO, a simple 3D thermal conduction model was developed, based on a mixed series and parallel thermal resistor circuit, giving a skeletal thermal conductivity value of approximately 1.25 W·m−1·K−1, which matches the value of the ordinary AAO membranes prepared from the same acid solution. The effect of different filler materials as well as the variation of the number of transversal nanochannels and the length of the 3D-AAO membrane in the effective thermal conductivity of the composite was studied. Finally, the thermal conductivity of two 3D-AAO membranes filled with cobalt and bismuth telluride was also measured, which was in good agreement with the thermal model predictions. Therefore, this work proved this structure as a powerful approach to tailor thermal properties. PMID:27934930

  17. Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties

    NARCIS (Netherlands)

    Eller, Tom; Greve, L; Andres, M.T.; Medricky, M; Hatscher, A; Meinders, Vincent T.; van den Boogaard, Antonius H.

    2014-01-01

    In this article, a constitutive model for quench-hardenable boron steel is presented. Three sets of boron steel blanks are heat treated such that their as-treated microstructures are close to fully martensitic, bainitic and ferritic/pearlitic, respectively. Hardness measurements show that the

  18. IPTEKS BAGI MASYARAKAT USAHA JASA TAILOR DI KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Sri Endah Wahyuningsih

    2016-03-01

    Full Text Available Tujuan kegiatan Ipteks bagi Masyarakat (IbM ini adalah untuk menyelesaikan permasalahan yang dihadapi oleh industri kecil jasa penjahitan busana pria dan wanita di Kecamatan Gajah Mungkur, Kota Semarang. Ada dua usaha jasa tailor yang diprioritaskan menjadi mitra IbM, yaitu Bapak Mamiek Slamet dan Ibu Sri Astuti Yudhaningrum dengan dua aspek permasalahan yang akan ditangani, yaitu aspek produksi dan aspek manajemen. Target khusus yang ingin dicapai adalah, dalam aspek produksi : 1 Dihasilkan 2 sofware pemrograman data pelanggan purnama dan dara tailor mengenai : identitas pelanggan, jenis dan ukuran pelanggan untuk model kebaya, kemeja, jas, celana dan rok, serta ongkos jahit 2 pelatihan Penggunaan mesin high speed untu produksi celana, kemeja maupun blazer 3 Menambah peralatan produksi, antara mesin jahit industri 4 Tempat material dan produk lebih tertata sehingga lebih nyaman, aman bersih, dan rapi. Dalam aspek manajemen: 1 Pembukuan data identitas, ukuran dan model baju pesanan tersimpan dalam komputer sehingga lebih cepat mencari dan mempercepat layanan lebih baik , pencatatan ongkos jahit dan keuangan lebih tertib 2 Terdapat nota sesuai identitas dan kartu nama tempat produksi. Sebagai tim pelaksana kegiatan ini melibatkan dosen dan mahasiswa dengan bidang keahlian yang sesuai dengan kebutuhan lapangan. Dalam pelaksanaan dipakai beberapa metode yang saling mendukung, antara lain dengan ceramah/ penyuluhan untuk materi yang bersifat teori dan motivasi, demonstrasi/peragaan untuk menyampaikan materi praktek/keterampilan, praktek langsung oleh mitra, dan pendampingan kegiatan. Luaran pengabdian dalam aspek produksi : 1 Dihasilkan 2 sofware pemrograman data pelanggan purnama dan dara tailor mengenai : identitas pelanggan, jenis dan ukuran pelanggan untuk model kebaya, kemeja, jas, celana dan rok, serta ongkos jahit 2 pelatihan Penggunaan mesin high speed untu produksi celana, kemeja maupun blazer 3 Menambah peralatan produksi, antara mesin

  19. Project of Economically Profitable Technological Process of Production of Rotor and Stator Plates of Inductive Position Sensor by Blanking and Roll Bending

    Directory of Open Access Journals (Sweden)

    Radek ČADA

    2013-12-01

    Full Text Available Paper concerns innovation of production of rotor and stator plates of inductive position sensors which are used at automatization of production processes. Authors analyse possibility of efficiency improvement of production of these devices in joint-stock company TES VSETÍN and suggest concrete solving of new production technology. Composition of production line for blanking and roll bending of rotor and stator plates of inductive position sensor from individual technological devices was suggested: decoiler, straightening device, actuating belt feeder, pneumatic shears with inclined tools, belt conveyer and four cylinders bending rolls. Construction of production line was projected in order to its operation can be secured by one production workman, which controls and chooses operation of CNC programme, takes separate roll bended rotor and stator plates of inductive position sensor from bending rolls and according to required technological procedure he composes them to rotor and stator complexes. Construction of production line was projected so that it is possible to move it by crane without necessity to dismantle and subsequently to put together and adjust the line.

  20. Penetrating chest trauma caused by a blank cartridge actuated rubber ball projectile: case presentation and ballistic investigation of an uncommon weapon type.

    Science.gov (United States)

    Frank, Matthias; Peters, Dieter; Klemm, Wolfram; Grossjohann, Rico; Ekkernkamp, Axel; Bockholdt, Britta; Seifert, Julia

    2017-09-01

    Recently, an increasing number of an uncommon weapon type based on a caliber 6-mm Flobert blank cartridge actuated revolver which discharges 10-mm-diameter rubber ball projectiles has been confiscated by police authorities following criminal offenses. A recent trauma case presenting with a penetrating chest injury occasioned an investigation into the basic ballistic parameters of this type of weapon. Kinetic energy E of the test projectiles was calculated between 5.8 and 12.5 J. Energy density ED of the test projectiles was close to or higher than the threshold energy density of human skin. It can be concluded that penetrating skin injuries due to free-flying rubber ball projectiles discharged at close range cannot be ruled out. However, in case of a contact shot, the main injury potential of this weapon type must be attributed to the high energy density of the muzzle gas jet which may, similar to well-known gas or alarm weapons, cause life-threatening or even lethal injuries.

  1. Experimental evaluation of tool wear throughout a continuous stroke blanking process of quenched 22MnB5 ultra-high-strength steel

    Science.gov (United States)

    Vogt, S.; Neumayer, F. F.; Serkyov, I.; Jesner, G.; Kelsch, R.; Geile, M.; Sommer, A.; Golle, R.; Volk, W.

    2017-09-01

    Steel is the most common material used in vehicles’ chassis, which makes its research an important topic for the automotive industry. Recently developed ultra-high-strength steels (UHSS) provide extreme tensile strength up to 1,500 MPa and combine great crashworthiness with good weight reduction potential. However, in order to reach the final shape of sheet metal parts additional cutting steps such as trimming and piercing are often required. The final trimming of quenched metal sheets presents a huge challenge to a conventional process, mainly because of the required extreme cutting force. The high cutting impact, due to the materials’ brittleness, causes excessive tool wear or even sudden tool failure. Therefore, a laser is commonly used for the cutting process, which is time and energy consuming. The purpose of this paper is to demonstrate the capability of a conventional blanking tool design in a continuous stroke piercing process using boron steel 22MnB5 sheets. Two different types of tool steel were tested for their suitability as active cutting elements: electro-slag remelted (ESR) cold work tool steel Bohler K340 ISODUR and powder-metallurgic (PM) high speed steel Bohler S390 MICROCLEAN. A FEM study provided information about an optimized punch design, which withstands buckling under high cutting forces. The wear behaviour of the process was assessed by the tool wear of the active cutting elements as well as the quality of cut surfaces.

  2. Nutrient and pesticide contamination bias estimated from field blanks collected at surface-water sites in U.S. Geological Survey Water-Quality Networks, 2002–12

    Science.gov (United States)

    Medalie, Laura; Martin, Jeffrey D.

    2017-08-14

    Potential contamination bias was estimated for 8 nutrient analytes and 40 pesticides in stream water collected by the U.S. Geological Survey at 147 stream sites from across the United States, and representing a variety of hydrologic conditions and site types, for water years 2002–12. This study updates previous U.S. Geological Survey evaluations of potential contamination bias for nutrients and pesticides. Contamination is potentially introduced to water samples by exposure to airborne gases and particulates, from inadequate cleaning of sampling or analytic equipment, and from inadvertent sources during sample collection, field processing, shipment, and laboratory analysis. Potential contamination bias, based on frequency and magnitude of detections in field blanks, is used to determine whether or under what conditions environmental data might need to be qualified for the interpretation of results in the context of comparisons with background levels, drinking-water standards, aquatic-life criteria or benchmarks, or human-health benchmarks. Environmental samples for which contamination bias as determined in this report applies are those from historical U.S. Geological Survey water-quality networks or programs that were collected during the same time frame and according to the same protocols and that were analyzed in the same laboratory as field blanks described in this report.Results from field blanks for ammonia, nitrite, nitrite plus nitrate, orthophosphate, and total phosphorus were partitioned by analytical method; results from the most commonly used analytical method for total phosphorus were further partitioned by date. Depending on the analytical method, 3.8, 9.2, or 26.9 percent of environmental samples, the last of these percentages pertaining to all results from 2007 through 2012, were potentially affected by ammonia contamination. Nitrite contamination potentially affected up to 2.6 percent of environmental samples collected between 2002 and 2006 and

  3. Textual healing: tailor-made kabbalistic therapeutics in Jerusalem.

    Science.gov (United States)

    Guzmen-Carmeli, Shlomo; Sharabi, Asaf

    2017-10-30

    This paper, based on fieldwork conducted in a Jerusalem yeshiva, describes how the yeshiva, a traditional institute of religious studies, also serves as an institution of healing and personal therapy in which sacred religious texts assume a central place. The article focuses on personal sessions between the rabbi who heads the yeshiva, and his audience of believers who turn to him for help in coping with personal hardships and tribulations. The paper contextualizes and elaborates upon the concept of 'deep healing' to describe how the rabbi uses his regular 'tool kit' to diagnose the problems of the person facing him and to offer optimal, personalized therapy. The rabbi uses religious texts to create textual deep healing processes that are tailor-made for the individual supplicant and are intended to accompany supplicants for a long period of time.

  4. Hacking commercial quantum cryptography systems by tailored bright illumination

    Science.gov (United States)

    Lydersen, Lars; Wiechers, Carlos; Wittmann, Christoffer; Elser, Dominique; Skaar, Johannes; Makarov, Vadim

    2010-10-01

    The peculiar properties of quantum mechanics allow two remote parties to communicate a private, secret key, which is protected from eavesdropping by the laws of physics. So-called quantum key distribution (QKD) implementations always rely on detectors to measure the relevant quantum property of single photons. Here we demonstrate experimentally that the detectors in two commercially available QKD systems can be fully remote-controlled using specially tailored bright illumination. This makes it possible to tracelessly acquire the full secret key; we propose an eavesdropping apparatus built from off-the-shelf components. The loophole is likely to be present in most QKD systems using avalanche photodiodes to detect single photons. We believe that our findings are crucial for strengthening the security of practical QKD, by identifying and patching technological deficiencies.

  5. Targeting the Fanconi Anemia Pathway to Identify Tailored Anticancer Therapeutics

    Directory of Open Access Journals (Sweden)

    Chelsea Jenkins

    2012-01-01

    Full Text Available The Fanconi Anemia (FA pathway consists of proteins involved in repairing DNA damage, including interstrand cross-links (ICLs. The pathway contains an upstream multiprotein core complex that mediates the monoubiquitylation of the FANCD2 and FANCI heterodimer, and a downstream pathway that converges with a larger network of proteins with roles in homologous recombination and other DNA repair pathways. Selective killing of cancer cells with an intact FA pathway but deficient in certain other DNA repair pathways is an emerging approach to tailored cancer therapy. Inhibiting the FA pathway becomes selectively lethal when certain repair genes are defective, such as the checkpoint kinase ATM. Inhibiting the FA pathway in ATM deficient cells can be achieved with small molecule inhibitors, suggesting that new cancer therapeutics could be developed by identifying FA pathway inhibitors to treat cancers that contain defects that are synthetic lethal with FA.

  6. Fast optoelectric printing of plasmonic nanoparticles into tailored circuits

    Science.gov (United States)

    Rodrigo, José A.

    2017-04-01

    Plasmonic nanoparticles are able to control light at nanometre-scale by coupling electromagnetic fields to the oscillations of free electrons in metals. Deposition of such nanoparticles onto substrates with tailored patterns is essential, for example, in fabricating plasmonic structures for enhanced sensing. This work presents an innovative micro-patterning technique, based on optoelectic printing, for fast and straightforward fabrication of curve-shaped circuits of plasmonic nanoparticles deposited onto a transparent electrode often used in optoelectronics, liquid crystal displays, touch screens, etc. We experimentally demonstrate that this kind of plasmonic structure, printed by using silver nanoparticles of 40 nm, works as a plasmonic enhanced optical device allowing for polarized-color-tunable light scattering in the visible. These findings have potential applications in biosensing and fabrication of future optoelectronic devices combining the benefits of plasmonic sensing and the functionality of transparent electrodes.

  7. Tunable Laser Plasma Accelerator based on Longitudinal Density Tailoring

    Energy Technology Data Exchange (ETDEWEB)

    Gonsalves, Anthony; Nakamura, Kei; Lin, Chen; Panasenko, Dmitriy; Shiraishi, Satomi; Sokollik, Thomas; Benedetti, Carlo; Schroeder, Carl; Geddes, Cameron; Tilborg, Jeroen van; Osterhoff, Jens; Esarey, Eric; Toth, Csaba; Leemans, Wim

    2011-07-15

    Laser plasma accelerators have produced high-quality electron beams with GeV energies from cm-scale devices and are being investigated as hyperspectral fs light sources producing THz to {gamma}-ray radiation and as drivers for future high-energy colliders. These applications require a high degree of stability, beam quality and tunability. Here we report on a technique to inject electrons into the accelerating field of a laser-driven plasma wave and coupling of this injector to a lower-density, separately tunable plasma for further acceleration. The technique relies on a single laser pulse powering a plasma structure with a tailored longitudinal density profile, to produce beams that can be tuned in the range of 100-400 MeV with percent-level stability, using laser pulses of less than 40 TW. The resulting device is a simple stand-alone accelerator or the front end for a multistage higher-energy accelerator.

  8. The tinker, tailor, soldier in intracellular B12 trafficking.

    Science.gov (United States)

    Banerjee, Ruma; Gherasim, Carmen; Padovani, Dominique

    2009-10-01

    The recognition of eight discrete genetic complementation groups among patients with inherited cobalamin disorders provided early insights into the complexity of a cofactor-processing pathway that supports only two known B(12)-dependent enzymes in mammals. With the identification of all eight genes now completed, biochemical interrogations of their functions have started and are providing novel insights into a trafficking pathway involving porters that tinker with and tailor the active cofactor forms and editors that ensure the fidelity of the cofactor loading process. The principles of sequestration and escorted delivery of a rare and reactive organometallic cofactor that are emerging from studies on B(12) might be of general relevance to other cofactor trafficking pathways.

  9. Tailoring the slow light behavior in terahertz metasurfaces

    Energy Technology Data Exchange (ETDEWEB)

    Manjappa, Manukumara; Cong, Longqing; Singh, Ranjan, E-mail: ranjans@ntu.edu.sg [Center for Disruptive Photonic Technologies, Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371 (Singapore); Chiam, Sher-Yi [NUS High School of Math and Science, 20 Clementi Avenue 1, Singapore, Singapore 129957 (Singapore); Bettiol, Andrew A. [Department of Physics, National University of Singapore, Science Drive 3, Singapore, Singapore 117542 (Singapore); Zhang, Weili [School of Electrical and Computer Engineering, Oklahoma State University, 202 Engineering South, Stillwater, Oklahoma 74078 (United States)

    2015-05-04

    We experimentally study the effect of near field coupling on the transmission of light in terahertz metasurfaces. Our results show that tailoring the coupling between the resonators modulates the amplitude of resulting electromagnetically induced transmission, probed under different types of asymmetries in the coupled system. Observed change in the transmission amplitude is attributed to the change in the amount of destructive interference between the resonators in the vicinity of strong near field coupling. We employ a two-particle model to theoretically study the influence of the coupling between bright and quasi-dark modes on the transmission properties of the system and we find an excellent agreement with our observed results. Adding to the enhanced transmission characteristics, our results provide a deeper insight into the metamaterial analogues of atomic electromagnetically induced transparency and offer an approach to engineer slow light devices, broadband filters, and attenuators at terahertz frequencies.

  10. Personalized persuasion: tailoring persuasive appeals to recipients' personality traits.

    Science.gov (United States)

    Hirsh, Jacob B; Kang, Sonia K; Bodenhausen, Galen V

    2012-06-01

    Persuasive messages are more effective when they are custom-tailored to reflect the interests and concerns of the intended audience. Much of the message-framing literature has focused on the advantages of using either gain or loss frames, depending on the motivational orientation of the target group. In the current study, we extended this research to examine whether a persuasive appeal's effectiveness can be increased by aligning the message framing with the recipient's personality profile. For a single product, we constructed five advertisements, each designed to target one of the five major trait domains of human personality. In a sample of 324 survey respondents, advertisements were evaluated more positively the more they cohered with participants' dispositional motives. These results suggest that adapting persuasive messages to the personality traits of the target audience can be an effective way of increasing the messages' impact, and highlight the potential value of personality-based communication strategies.

  11. Controlling semiconductor nanoparticle size distributions with tailored ultrashort pulses

    International Nuclear Information System (INIS)

    Hergenroeder, R; Miclea, M; Hommes, V

    2006-01-01

    The laser generation of size-controlled semiconductor nanoparticle formation under gas phase conditions is investigated. It is shown that the size distribution can be changed if picosecond pulse sequences of tailored ultra short laser pulses (<200 fs) are employed. By delivering the laser energy in small packages, a temporal energy flux control at the target surface is achieved, which results in the control of the thermodynamic pathway the material takes. The concept is tested with silicon and germanium, both materials with a predictable response to double pulse sequences, which allows deduction of the materials' response to complicated pulse sequences. An automatic, adaptive learning algorithm was employed to demonstrate a future strategy that enables the definition of more complex optimization targets such as particle size on materials less predictable than semiconductors

  12. Biological fabrication of cellulose fibers with tailored properties

    Science.gov (United States)

    Natalio, Filipe; Fuchs, Regina; Cohen, Sidney R.; Leitus, Gregory; Fritz-Popovski, Gerhard; Paris, Oskar; Kappl, Michael; Butt, Hans-Jürgen

    2017-09-01

    Cotton is a promising basis for wearable smart textiles. Current approaches that rely on fiber coatings suffer from function loss during wear. We present an approach that allows biological incorporation of exogenous molecules into cotton fibers to tailor the material’s functionality. In vitro model cultures of upland cotton (Gossypium hirsutum) are incubated with 6-carboxyfluorescein-glucose and dysprosium-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid-glucose, where the glucose moiety acts as a carrier capable of traveling from the vascular connection to the outermost cell layer of the ovule epidermis, becoming incorporated into the cellulose fibers. This yields fibers with unnatural properties such as fluorescence or magnetism. Combining biological systems with the appropriate molecular design offers numerous possibilities to grow functional composite materials and implements a material-farming concept.

  13. [Medical treatment of breast cancer: chemotherapy and tailored therapy].

    Science.gov (United States)

    Dalenc, Florence

    2013-12-01

    The utility of adjuvant chemotherapy is clearly demonstrated because she significantly improved relapse and mortality. Globally, we report a one-third breast cancer mortality reduction. Nevertheless, the absolute or individual benefit is uncertain and the final decision depends on benefit-risk balance, integrating tumor biologic characteristics and comorbidities. The most effective regimen must contain an anthracycline and a taxane. This regimen must be proposed if chemotherapy indication is considered: this concerns the majority of triple-negative and HER2-positive cancer For hormone-receptor-positive and HER2-negative breast cancer, the decision of adjuvant or not (in addition to hormonal therapy) is most difficult, particularly for grade 2 tumors. The trastuzumab is an essential treatment for HER2-positive breast cancer, because this tailored therapy has considerably improved the prognosis.

  14. Design and Implementation of Company Tailored Automated Material Handling

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1996-01-01

    This article focuses on the problems of analysing automation of material handling systems in order to develop an efficient automated solution that is specifically tailored to the company. The research has resulted in development of new methods for evaluating factory automation from design...... to implementation. The goals of the research were to analyse and evaluate automation in order to obtain an advantageous combination of human and automated resources. The idea is to asses different solutions in a virtual environment, where experiments and analyses can be performed so that the company can justify...... for their application with computer aided information processing tools. The framework is named the "Automated Material Handling (AMH) Preference GuideLine". The research has been carried out in close co-operation with Danish and European industry, where implementations of automation can be referred to. It is our...

  15. Aeroelastic Tailoring of a Plate Wing with Functionally Graded Materials

    Science.gov (United States)

    Dunning, Peter D.; Stanford, Bret K.; Kim, H. Alicia; Jutte, Christine V.

    2014-01-01

    This work explores the use of functionally graded materials for the aeroelastic tailoring of a metallic cantilevered plate-like wing. Pareto trade-off curves between dynamic stability (flutter) and static aeroelastic stresses are obtained for a variety of grading strategies. A key comparison is between the effectiveness of material grading, geometric grading (i.e., plate thickness variations), and using both simultaneously. The introduction of material grading does, in some cases, improve the aeroelastic performance. This improvement, and the physical mechanism upon which it is based, depends on numerous factors: the two sets of metallic material parameters used for grading, the sweep of the plate, the aspect ratio of the plate, and whether the material is graded continuously or discretely.

  16. Tailoring cyanobacterial cell factory for improved industrial properties.

    Science.gov (United States)

    Luan, Guodong; Lu, Xuefeng

    Photosynthetic biomanufacturing provides a promising solution for sustainable production of biofuels and biochemicals. Cyanobacteria are among the most promising microbial platforms for the construction of photosynthetic cell factories. Metabolic engineering of cyanobacteria has enabled effective photosynthetic synthesis of diverse natural or non-natural metabolites, while commercialization of photosynthetic biomanufacturing is usually restricted by process and economic feasibilities. In actual outdoor conditions, active cell growth and product synthesis is restricted to narrow light exposure windows of the day-night cycles and is threatened by diverse physical, chemical, and biological environmental stresses. For biomass harvesting and bioproduct recovery, energy and cost consuming processing and equipment is required, which further decreases the economic and environmental competitiveness of the entire process. To facilitate scaled photosynthetic biomanufacturing, lots of efforts have been made to engineer cyanobacterial cell properties required by robust & continual cultivation and convenient & efficient recovery. In this review, we specifically summarized recently reported engineering strategies on optimizing industrial properties of cyanobacterial cells. Through systematically re-editing the metabolism, morphology, mutualism interaction of cyanobacterial chassis cells, the adaptabilities and compatibilities of the cyanobacterial cell factories to the industrial process could be significantly improved. Cell growth and product synthesis of the tailored cyanobacterial cells could be expanded and maintained at night and in stressful environments, while convenient biomass harvesting could also be expected. For developing more feasible cyanobacterial photosynthetic biomanufacturing in large scale, we here propose the importance of tailoring industrial properties of cyanobacteria and outline the directions that should be exploited in the future. Copyright © 2018

  17. Cluster Dynamics: Laying the Foundation for Tailoring the Design of Cluster ASSE

    Science.gov (United States)

    2016-02-25

    AFRL-AFOSR-VA-TR-2016-0081 CLUSTER DYNAMICS: LAYING THE FOUNDATION FOR TAILORING THE DESIGN OF CLUSTER ASSE Albert Castleman PENNSYLVANIA STATE...15-10-2015 4. TITLE AND SUBTITLE CLUSTER DYNAMICS: LAYING THE FOUNDATION FOR TAILORING THE DESIGN OF CLUSTER ASSEMBLED NANOSCALE MATERIALS 5a... clusters as the building blocks of new materials with tailored properties that are beneficial to the AFOSR. Our continuing program is composed of two

  18. Effects of tailoring ingredients in auditory persuasive health messages on fruit and vegetable intake

    OpenAIRE

    Elbert, Sarah P.; Dijkstra, Arie; Rozema, Andrea

    2017-01-01

    Objective: Health messages can be tailored by applying different tailoring ingredients, among which personalisation, feedback and adaptation. This experiment investigated the separate effects of these tailoring ingredients on behaviour in auditory health persuasion. Furthermore, the moderating effect of self-efficacy was assessed.Design: The between-participants design consisted of four conditions. A generic health message served as a control condition; personalisation was applied using the r...

  19. Systematic tailoring for the implementation of guideline recommendations for anxiety and depressive disorders in general practice: perceived usefulness of tailored interventions

    NARCIS (Netherlands)

    Sinnema, H.; Terluin, B.; Wensing, M.; Volker, D.; Franx, G.; van Balkom, A.J.L.M.; de Lange, J.

    2013-01-01

    Background: The uptake of guideline recommendations in general practice can potentially be improved by designing implementation interventions that are tailored to prospectively identify barriers. However, there is insufficient evidence regarding the most effective and efficient approaches to

  20. Systematic tailoring for the implementation of guideline recommendations for anxiety and depressive disorders in general practice: perceived usefulness of tailored interventions

    NARCIS (Netherlands)

    Sinnema, H.; Terluin, B.; Wensing, M.; Volker, D.; Franx, G.; Balkom, A. van; Lange, J.

    2013-01-01

    BACKGROUND: The uptake of guideline recommendations in general practice can potentially be improved by designing implementation interventions that are tailored to prospectively identify barriers. However, there is insufficient evidence regarding the most effective and efficient approaches to

  1. Tailoring Thermal Radiative Properties with Doped-Silicon Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhuomin [Georgia Inst. of Technology, Atlanta, GA (United States)

    2017-08-28

    Aligned doped-silicon nanowire (D-SiNW) arrays form a hyperbolic metamaterial in the mid-infrared and have unique thermal radiative properties, such as broadband omnidirectional absorption, low-loss negative refraction, etc. A combined theoretical and experimental investigation will be performed to characterize D-SiNW arrays and other metamaterials for tailoring thermal radiative properties. Near-field thermal radiation between anisotropic materials with hyperbolic dispersions will also be predicted for potential application in energy harvesting. A new kind of anisotropic metamaterial with a hyperbolic dispersion in a broad infrared region has been proposed and demonstrated based on aligned doped-silicon nanowire (D-SiNW) arrays. D-SiNW-based metamaterials have unique thermal radiative properties, such as broadband omnidirectional absorption whose width and location can be tuned by varying the filling ratio and/or doping level. Furthermore, high figure of merit (FOM) can be achieved in a wide spectral region, suggesting that D-SiNW arrays may be used as a negative refraction material with much less loss than other structured materials, such as layered semiconductor materials. We have also shown that D-SiNWs and other nanostructures can significantly enhance near-field thermal radiation. The study of near-field radiative heat transfer between closely spaced objects and the electromagnetic wave interactions with micro/nanostructured materials has become an emerging multidisciplinary field due to its importance in advanced energy systems, manufacturing, local thermal management, and high spatial resolution thermal sensing and mapping. We have performed extensive study on the energy streamlines involving anisotropic metamaterials and the applicability of the effective medium theory for near-field thermal radiation. Graphene as a 2D material has attracted great attention in nanoelectronics, plasmonics, and energy harvesting. We have shown that graphene can be used to

  2. A lightweight, biological structure with tailored stiffness: The feather vane.

    Science.gov (United States)

    Sullivan, Tarah N; Pissarenko, Andreï; Herrera, Steven A; Kisailus, David; Lubarda, Vlado A; Meyers, Marc A

    2016-09-01

    The flying feathers of birds are keratinous appendages designed for maximum performance with a minimum weight penalty. Thus, their design contains ingenious combinations of components that optimize lift, stiffness, aerodynamics, and damage resistance. This design involves two main parts: a central shaft that prescribes stiffness and lateral vanes which allows for the capture of air. Within the feather vane, barbs branch from the shaft and barbules branch from barbs, forming a flat surface which ensures lift. Microhooks at the end of barbules hold barbs tightly together, providing the close-knit, unified structure of the feather vane and enabling a repair of the structure through the reattachment of un-hooked junctions. Both the shaft and barbs are lightweight biological structures constructed of keratin using the common motif of a solid shell and cellular interior. The cellular core increases the resistance to buckling with little added weight. Here we analyze the detailed structure of the feather barb and, for the first time, explain its flexural stiffness in terms of the mechanics of asymmetric foam-filled beams subjected to bending. The results are correlated and validated with finite element modeling. We compare the flexure of single barbs as well as arrays of barbs and find that the interlocking adherence of barbs to one another enables a more robust structure due to minimized barb rotation during deflection. Thus, the flexure behavior of the feather vane can be tailored by the adhesive hooking between barbs, creating a system that mitigates damage. A simplified three-dimensional physical model for this interlocking mechanism is constructed by additive manufacturing. The exceptional architecture of the feather vane will motivate the design of bioinspired structures with tailored and unique properties ranging from adhesives to aerospace materials. Despite its importance to bird flight, literature characterizing the feather vane is extremely limited. The feather

  3. Nanosecond laser-induced synthesis of nanoparticles with tailorable magneticanisotropy

    International Nuclear Information System (INIS)

    Krishna, H.; Gangopadhyay, A.K.; Strader, J.; Kalyanaraman, R.

    2011-01-01

    Controlling the magnetic orientation of nanoparticles is important for many applications. Recently, it has been shown that single domain ferromagnetic hemispherical Co nanoparticles prepared by nanosecond laser-induced self-organization, show magnetic orientation that was related to the negative sign of the magnetostrictive coefficient λ S [J. Appl. Phys. v103, p073902, 2008]. Here we have extended this work to the Fe 50 Co 50 alloy, which has a positive λ S and Ni, which has a negative λ S . Patterned arrays of ferromagnetic nanoparticles of Fe 50 Co 50 , Ni, (and Co) were synthesized from their ultrathin metal films on SiO 2 substrate by nanosecond laser-induced self-organization. The morphology, nanostructure, and magnetic behavior of the nanoparticle arrays were investigated by a combination of electron microscopy, atomic force microscopy, and magnetic force microscopy techniques. Transmission electron microscopy investigations revealed a granular polycrystalline nanostructure, with the number of grains inside the nanoparticle increasing with their diameter. Magnetic force measurements showed that the magnetization direction of the hemispherical Co and Ni nanoparticles was predominantly out-of-plane while those for the Fe 50 Co 50 alloy was in the plane of the substrate. Finite element analysis was used to estimate the average residual strain in the nanoparticles, following laser processing. The difference in behavior is due to the dominating influence of magnetostrictive energy on the magnetization as a result of residual thermal strain following fast laser processing. Since λ S is negative for polycrystalline Co and Ni, and positive for Fe 50 Co 50 , the tensile residual strain forces the magnetization direction to out-of-plane and in-plane, respectively. This work demonstrates a cost-effective non-epitaxial technique for the synthesis of magnetic nanoparticles with tailored magnetization orientations. - Research Highlights: → Pulsed laser self

  4. Tailored sequential drug release from bilayered calcium sulfate composites

    International Nuclear Information System (INIS)

    Orellana, Bryan R.; Puleo, David A.

    2014-01-01

    The current standard for treating infected bony defects, such as those caused by periodontal disease, requires multiple time-consuming steps and often multiple procedures to fight the infection and recover lost tissue. Releasing an antibiotic followed by an osteogenic agent from a synthetic bone graft substitute could allow for a streamlined treatment, reducing the need for multiple surgeries and thereby shortening recovery time. Tailorable bilayered calcium sulfate (CS) bone graft substitutes were developed with the ability to sequentially release multiple therapeutic agents. Bilayered composite samples having a shell and core geometry were fabricated with varying amounts (1 or 10 wt.%) of metronidazole-loaded poly(lactic-co-glycolic acid) (PLGA) particles embedded in the shell and simvastatin directly loaded into either the shell, core, or both. Microcomputed tomography showed the overall layered geometry as well as the uniform distribution of PLGA within the shells. Dissolution studies demonstrated that the amount of PLGA particles (i.e., 1 vs. 10 wt.%) had a small but significant effect on the erosion rate (3% vs. 3.4%/d). Mechanical testing determined that introducing a layered geometry had a significant effect on the compressive strength, with an average reduction of 35%, but properties were comparable to those of mandibular trabecular bone. Sustained release of simvastatin directly loaded into CS demonstrated that changing the shell to core volume ratio dictates the duration of drug release from each layer. When loaded together in the shell or in separate layers, sequential release of metronidazole and simvastatin was achieved. By introducing a tunable, layered geometry capable of releasing multiple drugs, CS-based bone graft substitutes could be tailored in order to help streamline the multiple steps needed to regenerate tissue in infected defects. - Highlights: • Bilayered CS composites were fabricated as potential bone graft substitutes. • The shell

  5. Tailored sequential drug release from bilayered calcium sulfate composites

    Energy Technology Data Exchange (ETDEWEB)

    Orellana, Bryan R.; Puleo, David A., E-mail: puleo@uky.edu

    2014-10-01

    The current standard for treating infected bony defects, such as those caused by periodontal disease, requires multiple time-consuming steps and often multiple procedures to fight the infection and recover lost tissue. Releasing an antibiotic followed by an osteogenic agent from a synthetic bone graft substitute could allow for a streamlined treatment, reducing the need for multiple surgeries and thereby shortening recovery time. Tailorable bilayered calcium sulfate (CS) bone graft substitutes were developed with the ability to sequentially release multiple therapeutic agents. Bilayered composite samples having a shell and core geometry were fabricated with varying amounts (1 or 10 wt.%) of metronidazole-loaded poly(lactic-co-glycolic acid) (PLGA) particles embedded in the shell and simvastatin directly loaded into either the shell, core, or both. Microcomputed tomography showed the overall layered geometry as well as the uniform distribution of PLGA within the shells. Dissolution studies demonstrated that the amount of PLGA particles (i.e., 1 vs. 10 wt.%) had a small but significant effect on the erosion rate (3% vs. 3.4%/d). Mechanical testing determined that introducing a layered geometry had a significant effect on the compressive strength, with an average reduction of 35%, but properties were comparable to those of mandibular trabecular bone. Sustained release of simvastatin directly loaded into CS demonstrated that changing the shell to core volume ratio dictates the duration of drug release from each layer. When loaded together in the shell or in separate layers, sequential release of metronidazole and simvastatin was achieved. By introducing a tunable, layered geometry capable of releasing multiple drugs, CS-based bone graft substitutes could be tailored in order to help streamline the multiple steps needed to regenerate tissue in infected defects. - Highlights: • Bilayered CS composites were fabricated as potential bone graft substitutes. • The shell

  6. On the construction of a 2-metre mirror blank for the universal reflecting telescope in Tautenburg (German Title: Über die Fertigung eines 2-Meter-Spiegelträgers für das Universal-Spiegelteleskop in Tautenburg )

    Science.gov (United States)

    Lödel, Wolfgang

    The astronomers' desire to penetrate deeper into space transforms into a demand for larger telescopes. The primary mirror constitutes the main part of a reflecting telescope, and it determines all subsequent activities. Already in the 1930s activities existed in the Schott company to manufacture mirror blanks up to diameters of 2 metres, which could not be pursued because of political constraints. This ambitious goal was again picked up a few years after the war. At a time when the procurement of raw materials was extremely difficult, the glass workers of Schott in Jena attacked this large project. After some failures, a good mirror blank could be delivered to the Carl Zeiss Company in 1951 for further processing and for the construction of the first 2-metre reflecting telescope. From 1960 to 1986, this mirror made from optical glass ZK7 served its purpose at the Karl Schwarzschild Observatory in Tautenburg. lt was then replaced by a zero expansion glass ceramics mirror.

  7. Tailorable thiolated trimethyl chitosans for covalently stabilized nanoparticles.

    Science.gov (United States)

    Verheul, Rolf J; van der Wal, Steffen; Hennink, Wim E

    2010-08-09

    A novel four-step method is presented to synthesize partially thiolated trimethylated chitosan (TMC) with a tailorable degree of quaternization and thiolation. First, chitosan was partially N-carboxylated with glyoxylic acid and sodium borohydride. Next, the remaining amines were quantitatively dimethylated with formaldehyde and sodium borohydride and then quaternized with iodomethane in NMP. Subsequently, these partially carboxylated TMCs dissolved in water were reacted with cystamine at pH 5.5 using EDC as coupling agent. After addition of DTT and dialysis, thiolated TMCs were obtained, varying in degree of quaternization (25-54%) and degree of thiolation (5-7%), as determined with (1)H NMR and Ellman's assay. Gel permeation chromatography with light scattering detection indicated limited intermolecular cross-linking. All thiolated TMCs showed rapid oxidation to yield disulfide cross-linked TMC at pH 7.4, while the thiolated polymers were rather stable at pH 4.0. When Calu-3 cells were used, XTT and LDH cell viability tests showed a slight reduction in cytotoxicity for thiolated TMCs as compared to the nonthiolated polymers with similar DQs. Positively charged nanoparticles loaded with fluorescently labeled ovalbumin were made from thiolated TMCs and thiolated hyaluronic acid. The stability of these particles was confirmed in 0.8 M NaCl, in contrast to particles made from nonthiolated polymers that dissociated under these conditions, demonstrating that the particles were held together by intermolecular disulfide bonds.

  8. Defect driven tailoring of colossal dielectricity of Reduced Graphene Oxide

    Energy Technology Data Exchange (ETDEWEB)

    Sarkar, S.; Mondal, A. [Department of Physics, Jadavpur University, Kolkata 700 032 (India); Dey, K. [Department of Solid State Physics, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700 032 (India); Ray, R., E-mail: juphyruma@gmail.com [Department of Physics, Jadavpur University, Kolkata 700 032 (India)

    2016-02-15

    Highlights: • Reduced graphene oxides (RGO) are prepared by two chemical routes. • Defects in RGO are characterized by Raman, FTIR and XPS studies. • Defects tailor colossal dielectricity in RGO. - Abstract: Reduced graphene oxide (RGO) is prepared in two different chemical routes where reduction of graphene oxide is performed by hydrazine hydrate and through high pressure in hydrothermal reactor. Samples are characterized by X-ray powdered diffraction (XRD), thermo gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and tunneling electron microscopy (TEM). Types of defects are probed by Raman, FTIR spectroscopy and X-ray photoelectron spectroscopy (XPS). UV–vis absorption reveals different optical band gaps of the two RGOs. Conductivity mechanism is studied through I–V measurements displaying different characteristic features which are addressed due to the presence of defects appeared in different synthesis. Significantly high value (∼10{sup 4}) of dielectric permittivity at 10 MHz is attractive for technological application which could be tuned by the defects present in RGO.

  9. Tailoring properties of reduced graphene oxide by oxygen plasma treatment

    Science.gov (United States)

    Kondratowicz, Izabela; Nadolska, Małgorzata; Şahin, Samet; Łapiński, Marcin; Prześniak-Welenc, Marta; Sawczak, Mirosław; Yu, Eileen H.; Sadowski, Wojciech; Żelechowska, Kamila

    2018-05-01

    We report an easily controllable, eco-friendly method for tailoring the properties of reduced graphene oxide (rGO) by means of oxygen plasma. The effect of oxygen plasma treatment time (1, 5 and 10 min) on the surface properties of rGO was evaluated. Physicochemical characterization using microscopic, spectroscopic and thermal techniques was performed. The results revealed that different oxygen-containing groups (e.g. carboxyl, hydroxyl) were introduced on the rGO surface enhancing its wettability. Furthermore, upon longer treatment time, other functionalities were created (e.g. quinones, lactones). Moreover, external surface of rGO was partially etched resulting in an increase of the material surface area and porosity. Finally, the oxygen plasma-treated rGO electrodes with bilirubin oxidase were tested for oxygen reduction reaction. The study showed that rGO treated for 10 min exhibited twofold higher current density than untreated rGO. The oxygen plasma treatment may improve the enzyme adsorption on rGO electrodes by introduction of oxygen moieties and increasing the porosity.

  10. Tailorable stimulated Brillouin scattering in nanoscale silicon waveguides.

    Science.gov (United States)

    Shin, Heedeuk; Qiu, Wenjun; Jarecki, Robert; Cox, Jonathan A; Olsson, Roy H; Starbuck, Andrew; Wang, Zheng; Rakich, Peter T

    2013-01-01

    Nanoscale modal confinement is known to radically enhance the effect of intrinsic Kerr and Raman nonlinearities within nanophotonic silicon waveguides. By contrast, stimulated Brillouin-scattering nonlinearities, which involve coherent coupling between guided photon and phonon modes, are stifled in conventional nanophotonics, preventing the realization of a host of Brillouin-based signal-processing technologies in silicon. Here we demonstrate stimulated Brillouin scattering in silicon waveguides, for the first time, through a new class of hybrid photonic-phononic waveguides. Tailorable travelling-wave forward-stimulated Brillouin scattering is realized-with over 1,000 times larger nonlinearity than reported in previous systems-yielding strong Brillouin coupling to phonons from 1 to 18 GHz. Experiments show that radiation pressures, produced by subwavelength modal confinement, yield enhancement of Brillouin nonlinearity beyond those of material nonlinearity alone. In addition, such enhanced and wideband coherent phonon emission paves the way towards the hybridization of silicon photonics, microelectromechanical systems and CMOS signal-processing technologies on chip.

  11. Engineering a CTL-Tailored Replicon RNA Vaccine against PRRSV

    DEFF Research Database (Denmark)

    Welner, Simon; Werder, Simea; Nielsen, Morten

    The development of vaccines against porcine reproductive and respiratory syndrome virus (PRRSV) has been hampered by the high mutation rate and the multiple immunoevasive strategies of the virus. With the overall aim of designing a broad coverage vaccine that induces an effective CTL response aga...... will be available for IVIS. This study exemplifies how bioinformatics epitope prediction, recombinant SLA molecules and RNA virus replicon design can be used to engineer a replicating non-propagating vaccine tailored to deliver conserved and immunogenic CTL epitopes....... against PRRSV, we have used a bioinformatics approach to identify common PRRSV type 2 epitopes predicted to react broadly with predominant swine MHC (SLA) alleles. All possible 9- and 10-mer peptides derived from 104 wild-type strains were analyzed in silico for their predicted binding affinity to 3...... cloned into a classical swine fever virus (CSFV)-derived replicon vector. Virus replicon particles (VRP) were rescued by transfection of a complementing cell line with replicon RNA. Polyepitope expression and subsequent proteasomal degradation was confirmed indirectly by increased FLAG-tagged protein...

  12. Tailoring Agility: Promiscuous Pair Story Authoring and Value Calculation

    Science.gov (United States)

    Tendon, Steve

    This chapter describes how a multi-national software organization created a business plan involving business units from eight countries that followed an agile way, after two previously failed attempts with traditional approaches. The case is told by the consultant who initiated implementation of agility into requirements gathering, estimation and planning processes in an international setting. The agile approach was inspired by XP, but then tailored to meet the peculiar requirements. Two innovations were critical. The first innovation was promiscuous pair story authoring, where user stories were written by two people (similarly to pair programming), and the pairing changed very often (as frequently as every 15-20 minutes) to achieve promiscuity and cater for diverse point of views. The second innovation was an economic value evaluation (and not the cost) which was attributed to stories. Continuous recalculation of the financial value of the stories allowed to assess the projects financial return. In this case implementation of agility in the international context allowed the involved team members to reach consensus and unanimity of decisions, vision and purpose.

  13. Bioprinting of hybrid tissue constructs with tailorable mechanical properties

    International Nuclear Information System (INIS)

    Schuurman, W; Khristov, V; Pot, M W; Dhert, W J A; Malda, J; Van Weeren, P R

    2011-01-01

    Tissue/organ printing aims to recapitulate the intrinsic complexity of native tissues. For a number of tissues, in particular those of musculoskeletal origin, adequate mechanical characteristics are an important prerequisite for their initial handling and stability, as well as long-lasting functioning. Hence, organized implants, possessing mechanical characteristics similar to the native tissue, may result in improved clinical outcomes of regenerative approaches. Using a bioprinter, grafts were constructed by alternate deposition of thermoplastic fibers and (cell-laden) hydrogels. Constructs of different shapes and sizes were manufactured and mechanical properties, as well as cell viability, were assessed. This approach yields novel organized viable hybrid constructs, which possess favorable mechanical characteristics, within the same range as those of native tissues. Moreover, the approach allows the use of multiple hydrogels and can thus produce constructs containing multiple cell types or bioactive factors. Furthermore, since the hydrogel is supported by the thermoplastic material, a broader range of hydrogel types can be used compared to bioprinting of hydrogels alone. In conclusion, we present an innovative and versatile approach for bioprinting, yielding constructs of which the mechanical stiffness provided by thermoplastic polymers can potentially be tailored, and combined specific cell placement patterns of multiple cell types embedded in a wide range of hydrogels. (communication)

  14. Bioprinting of hybrid tissue constructs with tailorable mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Schuurman, W; Khristov, V; Pot, M W; Dhert, W J A; Malda, J [Department of Orthopaedics, University Medical Center Utrecht (Netherlands); Van Weeren, P R, E-mail: j.malda@umcutrecht.nl [Faculty of Veterinary Sciences, Department of Equine Sciences, Utrecht University (Netherlands)

    2011-06-15

    Tissue/organ printing aims to recapitulate the intrinsic complexity of native tissues. For a number of tissues, in particular those of musculoskeletal origin, adequate mechanical characteristics are an important prerequisite for their initial handling and stability, as well as long-lasting functioning. Hence, organized implants, possessing mechanical characteristics similar to the native tissue, may result in improved clinical outcomes of regenerative approaches. Using a bioprinter, grafts were constructed by alternate deposition of thermoplastic fibers and (cell-laden) hydrogels. Constructs of different shapes and sizes were manufactured and mechanical properties, as well as cell viability, were assessed. This approach yields novel organized viable hybrid constructs, which possess favorable mechanical characteristics, within the same range as those of native tissues. Moreover, the approach allows the use of multiple hydrogels and can thus produce constructs containing multiple cell types or bioactive factors. Furthermore, since the hydrogel is supported by the thermoplastic material, a broader range of hydrogel types can be used compared to bioprinting of hydrogels alone. In conclusion, we present an innovative and versatile approach for bioprinting, yielding constructs of which the mechanical stiffness provided by thermoplastic polymers can potentially be tailored, and combined specific cell placement patterns of multiple cell types embedded in a wide range of hydrogels. (communication)

  15. Tailoring the magnetic properties of cobalt-ferrite nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Vega, A. Estrada de la; Garza-Navarro, M. A., E-mail: marco.garzanr@uanl.edu.mx; Durán-Guerrero, J. G.; Moreno Cortez, I. E.; Lucio-Porto, R.; González-González, V. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica (Mexico)

    2016-01-15

    In this contribution, we report on the tuning of magnetic properties of cobalt-ferrite nanoclusters. The cobalt-ferrite nanoclusters were synthesized from a two-step approach that consists of the synthesis of cobalt-ferrite nanoparticles in organic media, followed by their dispersion into aqueous dissolution to form an oil-in-water emulsion. These emulsions were prepared at three different concentrations of the cationic surfactant cetyltrimethylammonium bromide (CTAB), in order to control the size and clustering density of the nanoparticles in the nanoclusters. The synthesized samples were characterized by transmission electron microscopy and their related techniques, such as bright-field and Z-contrast imaging, electron diffraction and energy-dispersive X-ray spectrometry; as well as static magnetic measures. The experimental evidence indicates that the size, morphology, and nanoparticles clustering density in the nanoclusters is highly dependent of the cobalt-ferrite:CTAB molar ratio that is used in their synthesis. In addition, due to the clustering of the nanoparticles into the nanoclusters, their magnetic moments are blocked to relax cooperatively. Hence, the magnetic response of the nanoclusters can be tailored by controlling the size and nanoparticles clustering density.

  16. Unraveling spurious properties of interaction networks with tailored random networks.

    Directory of Open Access Journals (Sweden)

    Stephan Bialonski

    Full Text Available We investigate interaction networks that we derive from multivariate time series with methods frequently employed in diverse scientific fields such as biology, quantitative finance, physics, earth and climate sciences, and the neurosciences. Mimicking experimental situations, we generate time series with finite length and varying frequency content but from independent stochastic processes. Using the correlation coefficient and the maximum cross-correlation, we estimate interdependencies between these time series. With clustering coefficient and average shortest path length, we observe unweighted interaction networks, derived via thresholding the values of interdependence, to possess non-trivial topologies as compared to Erdös-Rényi networks, which would indicate small-world characteristics. These topologies reflect the mostly unavoidable finiteness of the data, which limits the reliability of typically used estimators of signal interdependence. We propose random networks that are tailored to the way interaction networks are derived from empirical data. Through an exemplary investigation of multichannel electroencephalographic recordings of epileptic seizures--known for their complex spatial and temporal dynamics--we show that such random networks help to distinguish network properties of interdependence structures related to seizure dynamics from those spuriously induced by the applied methods of analysis.

  17. Tailoring the Immune Response via Customization of Pathogen Gene Expression.

    Science.gov (United States)

    Runco, Lisa M; Stauft, Charles B; Coleman, J Robert

    2014-01-01

    The majority of studies focused on the construction and reengineering of bacterial pathogens have mainly relied on the knocking out of virulence factors or deletion/mutation of amino acid residues to then observe the microbe's phenotype and the resulting effect on the host immune response. These knockout bacterial strains have also been proposed as vaccines to combat bacterial disease. Theoretically, knockout strains would be unable to cause disease since their virulence factors have been removed, yet they could induce a protective memory response. While knockout strains have been valuable tools to discern the role of virulence factors in host immunity and bacterial pathogenesis, they have been unable to yield clinically relevant vaccines. The advent of synthetic biology and enhanced user-directed gene customization has altered this binary process of knockout, followed by observation. Recent studies have shown that a researcher can now tailor and customize a given microbe's gene expression to produce a desired immune response. In this commentary, we highlight these studies as a new avenue for controlling the inflammatory response as well as vaccine development.

  18. Tailorable stimulated Brillouin scattering in nanoscale silicon waveguides

    Science.gov (United States)

    Shin, Heedeuk; Qiu, Wenjun; Jarecki, Robert; Cox, Jonathan A.; Olsson, Roy H.; Starbuck, Andrew; Wang, Zheng; Rakich, Peter T.

    2013-01-01

    Nanoscale modal confinement is known to radically enhance the effect of intrinsic Kerr and Raman nonlinearities within nanophotonic silicon waveguides. By contrast, stimulated Brillouin-scattering nonlinearities, which involve coherent coupling between guided photon and phonon modes, are stifled in conventional nanophotonics, preventing the realization of a host of Brillouin-based signal-processing technologies in silicon. Here we demonstrate stimulated Brillouin scattering in silicon waveguides, for the first time, through a new class of hybrid photonic–phononic waveguides. Tailorable travelling-wave forward-stimulated Brillouin scattering is realized—with over 1,000 times larger nonlinearity than reported in previous systems—yielding strong Brillouin coupling to phonons from 1 to 18 GHz. Experiments show that radiation pressures, produced by subwavelength modal confinement, yield enhancement of Brillouin nonlinearity beyond those of material nonlinearity alone. In addition, such enhanced and wideband coherent phonon emission paves the way towards the hybridization of silicon photonics, microelectromechanical systems and CMOS signal-processing technologies on chip. PMID:23739586

  19. Tailoring nanocrystalline diamond coated on titanium for osteoblast adhesion.

    Science.gov (United States)

    Pareta, Rajesh; Yang, Lei; Kothari, Abhishek; Sirinrath, Sirivisoot; Xiao, Xingcheng; Sheldon, Brian W; Webster, Thomas J

    2010-10-01

    Diamond coatings with superior chemical stability, antiwear, and cytocompatibility properties have been considered for lengthening the lifetime of metallic orthopedic implants for over a decade. In this study, an attempt to tailor the surface properties of diamond films on titanium to promote osteoblast (bone forming cell) adhesion was reported. The surface properties investigated here included the size of diamond surface features, topography, wettability, and surface chemistry, all of which were controlled during microwave plasma enhanced chemical-vapor-deposition (MPCVD) processes using CH4-Ar-H2 gas mixtures. The hardness and elastic modulus of the diamond films were also determined. H2 concentration in the plasma was altered to control the crystallinity, grain size, and topography of the diamond coatings, and specific plasma gases (O2 and NH3) were introduced to change the surface chemistry of the diamond coatings. To understand the impact of the altered surface properties on osteoblast responses, cell adhesion tests were performed on the various diamond-coated titanium. The results revealed that nanocrystalline diamond (grain sizes diamond and, thus, should be further studied for improving orthopedic applications. Copyright 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2010.

  20. Chemical tailoring of steam to remediate underground mixed waste contaminents

    Science.gov (United States)

    Aines, Roger D.; Udell, Kent S.; Bruton, Carol J.; Carrigan, Charles R.

    1999-01-01

    A method to simultaneously remediate mixed-waste underground contamination, such as organic liquids, metals, and radionuclides involves chemical tailoring of steam for underground injection. Gases or chemicals are injected into a high pressure steam flow being injected via one or more injection wells to contaminated soil located beyond a depth where excavation is possible. The injection of the steam with gases or chemicals mobilizes contaminants, such as metals and organics, as the steam pushes the waste through the ground toward an extraction well having subatmospheric pressure (vacuum). The steam and mobilized contaminants are drawn in a substantially horizontal direction to the extraction well and withdrawn to a treatment point above ground. The heat and boiling action of the front of the steam flow enhance the mobilizing effects of the chemical or gas additives. The method may also be utilized for immobilization of metals by using an additive in the steam which causes precipitation of the metals into clusters large enough to limit their future migration, while removing any organic contaminants.

  1. Tailoring electronic properties of multilayer phosphorene by siliconization

    Science.gov (United States)

    Malyi, Oleksandr I.; Sopiha, Kostiantyn V.; Radchenko, Ihor; Wu, Ping; Persson, Clas

    Controlling a thickness dependence of electronic properties for two-dimensional (2d) materials is among primary goals for their large-scale applications. Herein, employing a first-principles computational approach, we predict that Si interaction with multilayer phosphorene (2d-P) can result in the formation of highly stable 2d-SiP and 2d-SiP$_2$ compounds with a weak interlayer interaction. Our analysis demonstrates that these systems are semiconductors with band gap energies that can be governed by varying the thickness and stacking order. Specifically, siliconization of phosphorene allows to design 2d-SiP$_x$ materials with significantly weaker thickness dependence of electronic properties than that in 2d-P and to develop ways for their tailoring. We also reveal the spatial dependence of electronic properties for 2d-SiP$_x$ highlighting difference in effective band gaps for different layers. Particularly, our results show that central layers in the multilayer 2d systems determine overall electronic properties, while the role of the outermost layers is noticeably smaller.

  2. Milk protein tailoring to improve functional and biological properties

    Directory of Open Access Journals (Sweden)

    JEAN-MARC CHOBERT

    2012-01-01

    Full Text Available Proteins are involved in every aspects of life: structure, motion, catalysis, recognition and regulation. Today's highly sophisticated science of the modifications of proteins has ancient roots. The tailoring of proteins for food and medical uses precedes the beginning of what is called biochemistry. Chemical modification of proteins was pursued early in the twentieth century as an analytical procedure for side-chain amino acids. Later, methods were developed for specific inactivation of biologically active proteins and titration of their essential groups. Enzymatic modifications were mainly developed in the seventies when many more enzymes became economically available. Protein engineering has become a valuable tool for creating or improving proteins for practical use and has provided new insights into protein structure and function. The actual and potential use of milk proteins as food ingredients has been a popular topic for research over the past 40 years. With today's sophisticated analytical, biochemical and biological research tools, the presence of compounds with biological activity has been demonstrated. Improvements in separation techniques and enzyme technology have enabled efficient and economic isolation and modification of milk proteins, which has made possible their use as functional foods, dietary supplements, nutraceuticals and medical foods. In this review, some chemical and enzymatic modifications of milk proteins are described, with particular focus on their functional and biological properties.

  3. Active coatings technologies for tailorable military coating systems

    Science.gov (United States)

    Zunino, J. L., III

    2007-04-01

    The main objective of the U.S. Army's Active Coatings Technologies Program is to develop technologies that can be used in combination to tailor coatings for utilization on Army Materiel. The Active Coatings Technologies Program, ACT, is divided into several thrusts, including the Smart Coatings Materiel Program, Munitions Coatings Technologies, Active Sensor packages, Systems Health Monitoring, Novel Technology Development, as well as other advanced technologies. The goal of the ACT Program is to conduct research leading to the development of multiple coatings systems for use on various military platforms, incorporating unique properties such as self repair, selective removal, corrosion resistance, sensing, ability to modify coatings' physical properties, colorizing, and alerting logistics staff when tanks or weaponry require more extensive repair. A partnership between the U.S. Army Corrosion Office at Picatinny Arsenal, NJ along with researchers at the New Jersey Institute of Technology, NJ, Clemson University, SC, University of New Hampshire, NH, and University of Massachusetts (Lowell), MA, are developing the next generation of Smart Coatings Materiel via novel technologies such as nanotechnology, Micro-electromechanical Systems (MEMS), meta-materials, flexible electronics, electrochromics, electroluminescence, etc. This paper will provide the reader with an overview of the Active Coatings Technologies Program, including an update of the on-going Smart Coatings Materiel Program, its progress thus far, description of the prototype Smart Coatings Systems and research tasks as well as future nanotechnology concepts, and applications for the Department of Defense.

  4. Adult-onset offenders: Is a tailored theory warranted?

    Science.gov (United States)

    Beckley, Amber L.; Caspi, Avshalom; Harrington, Honalee; Houts, Renate M.; Mcgee, Tara Renae; Morgan, Nick; Schroeder, Felix; Ramrakha, Sandhya; Poulton, Richie; Moffitt, Terrie E.

    2016-01-01

    Purpose To describe official adult-onset offenders, investigate their antisocial histories and test hypotheses about their origins. Methods We defined adult-onset offenders among 931 Dunedin Study members followed to age 38, using criminal-court conviction records. Results Official adult-onset offenders were 14% of men, and 32% of convicted men, but accounted for only 15% of convictions. As anticipated by developmental theories emphasizing early-life influences on crime, adult-onset offenders’ histories of antisocial behavior spanned back to childhood. Relative to juvenile-offenders, during adolescence they had fewer delinquent peers and were more socially inhibited, which may have protected them from conviction. As anticipated by theories emphasizing the importance of situational influences on offending, adult-onset offenders, relative to non-offenders, during adulthood more often had schizophrenia, bipolar disorder, and alcohol-dependence, had weaker social bonds, anticipated fewer informal sanctions, and self-reported more offenses. Contrary to some expectations, adult-onset offenders did not have high IQ or high socioeconomic-status families protecting them from juvenile conviction. Conclusions A tailored theory for adult-onset offenders is unwarranted because few people begin crime de novo as adults. Official adult-onset offenders fall on a continuum of crime and its correlates, between official non-offenders and official juvenile-onset offenders. Existing theories can accommodate adult-onset offenders. PMID:27134318

  5. Improvement of hydroforming processes using tailored semi-finished tubes

    Energy Technology Data Exchange (ETDEWEB)

    Goebel, R.; Chatti, S.; Homberg, W.; Kleiner, M.; Shankar, R. [Dortmund Univ. (Germany). Inst. of Forming Technology and Lightweight Construction

    2005-07-01

    The manufacturing of curved tubular workpieces with complex geometry by hydroforming is a well known process. The formability of workpieces is limited by the overall amount of expansion, which always has to start with the smallest perimeter. Especially workpieces with a high ratio between the smallest and widest diameter are critical with regard to their manufacture. To improve the capability the hydroforming process, a new concept using tailored semi-finished tubes with a variable cross-section has been developed. Instead of only expanding a tube with the smallest diameter, the diameter of a tube with middle-sized cross-section is reduced locally by a spinning process so that only the critical regions left have to be expanded. Due to the fact that usually the pre-form has to be bent to assure that it fits into the tool, an additional specialized tube-bending process has been developed to realize the bending of tubes with variable diameter. In this article, the investigation and optimization of this process chain is presented. The capabilities of the process have been improved regarding the behavior of the workpieces in the hydroforming process by manufacturing a complex structural part originating from automotive industry. (orig.)

  6. A systematic methodology for design of tailor-made blended products

    DEFF Research Database (Denmark)

    Yunus, Nor Alafiza Binti; Gernaey, Krist; Woodley, John

    2014-01-01

    A systematic methodology for design of tailor-made blended products has been developed. In tailor-made blended products, one identifies the product needs and matches them by blending different chemicals. The systematic methodology has four main tasks. First, the design problem is defined: the pro......, the methodology is highlighted through two case studies involving gasoline blends and lubricant base oils....

  7. Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

    Science.gov (United States)

    Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

    2017-06-01

    Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

  8. Risk identication of tailorable context-aware systems: a case study and lessons learned

    NARCIS (Netherlands)

    Zarifi Eslami, Mohammed; Sapkota, Brahmananda; Zarghami, Alireza; Vriezekolk, E.; van Sinderen, Marten J.; Wieringa, Roelf J.; Wieringa, P.A.

    In this paper, we discuss possible risks posed by the application of tailorable context-aware systems in real-life practices. We use a tailorable context-aware system in the homecare domain as a case study to identify and analyse such risks. Next, we discuss which of these risks can be generalized

  9. Technical Knowledge and Skills Development in the Informal Sector in Kenya: The Case of Custom Tailors

    Science.gov (United States)

    Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

    2017-01-01

    Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of…

  10. Working mechanisms of computer-tailored health education : evidence from smoking cessation

    NARCIS (Netherlands)

    Dijkstra, A.

    2005-01-01

    To further develop tailored interventions, their working mechanisms must be identified. In the present study, three tailored messages that each contained one potential working mechanism-personalization, adaptation or feedback-were compared with a standard information condition. Two hundred and two

  11. Use of electronic sales data to tailor nutrition education resources for an ethnically diverse population.

    Science.gov (United States)

    Eyles, H; Rodgers, A; Ni Mhurchu, C

    2010-02-01

    Nutrition education may be most effective when personally tailored. Individualised electronic supermarket sales data offer opportunities to tailor nutrition education using shopper's usual food purchases. The present study aimed to use individualised electronic supermarket sales data to tailor nutrition resources for an ethnically diverse population in a large supermarket intervention trial in New Zealand. Culturally appropriate nutrition education resources (i.e. messages and shopping lists) were developed with the target population (through two sets of focus groups) and ethnic researchers. A nutrient database of supermarket products was developed using retrospective sales data and linked to participant sales to allow tailoring by usual food purchases. Modified Heart Foundation Tick criteria were used to identify 'healthier' products in the database suitable for promotion in the resources. Rules were developed to create a monthly report listing the tailored and culturally targeted messages to be sent to each participant, and to produce automated, tailored shopping lists. Culturally targeted nutrition messages (n = 864) and shopping lists (n = 3 formats) were developed. The food and nutrient database (n = 3000 top-selling products) was created using 12 months of retrospective sales data, and comprised 60%'healthier' products. Three months of baseline sales data were used to determine usual food purchases. Tailored resources were successfully mailed to 123 Māori, 52 Pacific and 346 non-Māori non-Pacific participants over the 6-month trial intervention period. Electronic supermarket sales data can be used to tailor nutrition education resources for a large number of ethnically diverse supermarket shoppers.

  12. Developing Strategies for Waste Reduction by Means of Tailored Interventions in Santiago De Cuba

    Science.gov (United States)

    Tobias, Robert; Brugger, Adrian; Mosler, Hans-Joachim

    2009-01-01

    This article introduces an approach to tailoring behavior-change campaigns to target populations using the example of solid waste reduction in Santiago de Cuba. Tailoring is performed in the following steps: (1) Psychological constructs are selected to detect problems in performing the target behavior, and data are gathered on these constructs.…

  13. Addressing medication nonadherence by mobile phone: development and delivery of tailored messages.

    Science.gov (United States)

    Gatwood, Justin; Balkrishnan, Rajesh; Erickson, Steven R; An, Lawrence C; Piette, John D; Farris, Karen B

    2014-01-01

    Medication nonadherence remains a significant public health problem, and efforts to improve adherence have shown only limited impact. The tailoring of messages has become a popular method of developing communication to influence specific health-related behaviors but the development and impact of tailored text messages on medication use is poorly understood. The aim of this paper is to describe an approach to developing theory-based tailored messages for delivery via mobile phone to improve medication adherence among patients with diabetes. Kreuter's five-step tailoring process was followed to create tailored messages for mobile phone delivery. Two focus group sessions, using input from 11 people, and expert review of message content were used to adapt the survey instrument on which the messages were tailored and edit the developed messages for the target population. Following established tailoring methods a library of 168 theory-driven and 128 medication-specific tailored messages were developed and formatted for automated delivery to mobile phones. Concepts from the Health Belief Model and Self-Determination Theory were used to craft the messages and an algorithm was applied to determine the order and timing of messages with the aim of progressively influencing disease and treatment-related beliefs driving adherence to diabetes medication. The process described may be applied to future investigations aiming to improve medication adherence in patients with diabetes and the effectiveness of the current messages will be tested in a planned analysis. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Why are Tailored Messages More Effective? A Multiple Mediation Analysis of a Breast Cancer Screening Intervention.

    Science.gov (United States)

    Jensen, Jakob D; King, Andy J; Carcioppolo, Nicholas; Davis, LaShara

    2012-10-01

    Past research has found that tailoring increases the persuasive effectiveness of a message. However, the observed effect has been small and the explanatory mechanism remains unknown. To address these shortcomings, a tailoring software program was created that personalized breast cancer screening pamphlets according to risk, health belief model constructs, and visual preference. Women aged 40 and older ( N = 119) participated in a 2 (tailored vs. stock message) × 2 (charts/graphs vs. illustrated visuals) × 3 (nested replications of the visuals) experiment. Participants provided with tailored illustrated pamphlets expressed greater breast cancer screening intentions than those provided with other pamphlets. In a test of 10 different mediators, perceived message relevance was found to fully mediate the tailoring × visual interaction.

  15. Molecular tailoring of interfaces for thin film on substrate systems

    Science.gov (United States)

    Grady, Martha Elizabeth

    Thin film on substrate systems appear most prevalently within the microelectronics industry, which demands that devices operate in smaller and smaller packages with greater reliability. The reliability of these multilayer film systems is strongly influenced by the adhesion of each of the bimaterial interfaces. During use, microelectronic components undergo thermo-mechanical cycling, which induces interfacial delaminations leading to failure of the overall device. The ability to tailor interfacial properties at the molecular level provides a mechanism to improve thin film adhesion, reliability and performance. This dissertation presents the investigation of molecular level control of interface properties in three thin film-substrate systems: photodefinable polyimide films on passivated silicon substrates, self-assembled monolayers at the interface of Au films and dielectric substrates, and mechanochemically active materials on rigid substrates. For all three materials systems, the effect of interfacial modifications on adhesion is assessed using a laser-spallation technique. Laser-induced stress waves are chosen because they dynamically load the thin film interface in a precise, noncontacting manner at high strain rates and are suitable for both weak and strong interfaces. Photodefinable polyimide films are used as dielectrics in flip chip integrated circuit packages to reduce the stress between silicon passivation layers and mold compound. The influence of processing parameters on adhesion is examined for photodefinable polyimide films on silicon (Si) substrates with three different passivation layers: silicon nitride (SiNx), silicon oxynitride (SiOxNy), and the native silicon oxide (SiO2). Interfacial strength increases when films are processed with an exposure step as well as a longer cure cycle. Additionally, the interfacial fracture energy is assessed using a dynamic delamination protocol. The high toughness of this interface (ca. 100 J/m2) makes it difficult

  16. Molecular dynamics simulation studies of tailored nanostructured polymers

    Science.gov (United States)

    Liu, Lixin

    With recent advancements in the synthesis and characterization of polymeric materials, scientists are able to create multi-scale novel polymers with various cases of chemical functionalities, diversified topologies, as well as cross-linking networks. Due to those remarkable achievements, there are a broad range of possible applications of smart polymers in catalysis, in environmental remediation, and especially in drug-delivery. Because of rising interest in developing therapeutic drug binding to specific treating target, polymer chemists are in particular interests in design and engineering the drug delivery materials to be not only bio-compatible, but also to be capable of self-assembly at various in-vivo physiological stimulus. Both experimental and theoretical work indicate that the thermodynamic properties relating to the hydrophobic effect play an important role in determining self-assembly process. At the same time, computational simulation and modeling are powerful instruments to contribute to microscopic thermodynamics' understanding toward self-assembly phenomenon. Along with statistical approaches, constructing empirical model based on simulation results would also help predict for further development of tailored nano-structured materials. My Research mainly focused on investigating physical and chemical characteristics of polymer materials through molecular dynamics simulation and probing the fundamental thermodynamic driving force of self-assembly behavior. We tried to surmount technological obstacles in computational chemistry and build an efficient scheme to identify the physical and chemical Feature of molecules, to reproduce underlying properties, to understand the origin of thermodynamic signatures, and to speed up current trial and error process in screening new materials.

  17. Development of tailor-made silica fibres for TL dosimetry

    International Nuclear Information System (INIS)

    Bradley, D.A.; Abdul Sani, Siti F.; Alalawi, Amani I.; Jafari, S.M.; Noor, Noramaliza M.; Hairul Azhar, A.R.; Mahdiraji, Ghafour Amouzad; Tamchek, Nizam; Ghosh, S.; Paul, M.C.; Alzimami, Khalid S.; Nisbet, A.; Maah, M.J.

    2014-01-01

    The Ge dopant in commercially available silica optical fibres gives rise to appreciable thermoluminscence (TL), weight-for-weight offering sensitivity to MV X-rays several times that of the LiF dosimeter TLD100. The response of these fibres to UV radiation, X-rays, electrons, protons, neutrons and alpha particles, with doses from a fraction of 1 Gy up to 10 kGy, have stimulated further investigation of the magnitude of the TL signal for intrinsic and doped SiO 2 fibres. We represent a consortium effort between Malaysian partners and the University of Surrey, aimed at production of silica fibres with specific TL dosimetry applications, utilizing modified chemical vapour deposition (MCVD) doped silica–glass production and fibre-pulling facilities. The work is informed by defect and dopant concentration and various production dependences including pulling parameters such as temperature, speed and tension; the fibres also provide for spatial resolutions down to <10 µm, confronting many limitations faced in use of conventional (TL) dosimetry. Early results are shown for high spatial resolution (∼0.1 mm) single-core Ge-doped TL sensors, suited to radiotherapy applications. Preliminary results are also shown for undoped flat optical fibres of mm dimensions and Ge-B doped flat optical fibres of sub-mm dimensions, with potential for measurement of doses in medical diagnostic applications. - Highlights: • Optical fibres tailor-made for TL dosimetry. • Sensitive to diagnostic as well as therapy doses in medicine. • Preform and fibre pulling facilities. • Relative TL and EPR measurements

  18. Universal versus tailored solutions for alleviating disruptive behavior in hospitals.

    Science.gov (United States)

    Berman-Kishony, Talia; Shvarts, Shifra

    2015-01-01

    Disruptive behavior among hospital staff can negatively affect quality of care. Motivated by a standard on disruptive behavior issued by The Joint Commission (LD 3.10), as well as the desire to improve patient care, minimize liability, and improve staff retention, hospitals are setting policies to prevent and resolve disruptive behaviors. However, it is unknown whether uniform conflict management tools are equally effective among different hospital settings. We surveyed residents and nurses to identify similarities and differences among hospital departments in the antecedents, characteristics, and outcomes of disruptive behaviors, and in the effectiveness of conflict management tools. We used a quantitative questionnaire-based assessment to examine conflict perceptions in eight different hospital departments at Rambam Medical Center in Haifa, Israel. Most participants (89 %) reported witnessing disruptive behavior either directly or in other parties; the most significant causes were identified as intense work, miscommunication, and problematic personalities. The forms of these behaviors, however, varied significantly between departments, with some more prone to expressed conflicts, while others were characterized by hidden disruptive behaviors. These outcomes were correlated by the antecedents to disruptive behavior, which in turn affected the effectiveness of alleviating strategies and tools. Some tools, such as processes for evaluating complaints, teamwork and conflict management courses, and introducing a behavioral mission statement, are effective across many antecedents. Other tools, however, are antecedent-specific, falling into two principal categories: tools directly removing a specific problem and tools that offer a way to circumvent the problem. Conflict resolution tools and strategies, based on residents and nurse perceptions, may be more effective if tailored to the specific situation, rather than using a "one-size-fits-all" approach.

  19. Toward tailored disease management for type 2 diabetes.

    Science.gov (United States)

    Elissen, Arianne M J; Duimel-Peeters, Inge G P; Spreeuwenberg, Cor; Spreeuwenberg, Marieke; Vrijhoef, Hubertus J M

    2012-10-01

    To assess the differentiated effects of population-based disease management programs (DMPs) for type 2 diabetes on intermediary clinical outcomes in The Netherlands. Data covering a period from 20 to 24 months between January 2008 and December 2010 were collected from 18 Dutch care groups (primary care provider networks that have bundled payment contracts for delivery of diabetes DMPs). Meta-analysis and meta-regression methods were used to conduct differentiated analyses of these programs' effects over time on 4 clinical indicators: glycated hemoglobin, lowdensity lipoprotein, systolic blood pressure, and body mass index. Heterogeneous average results were stratified according to various patient and process characteristics to investigate whether differences in these features could explain variation in outcomes. Between 56% and 71% of patients (N = 105,056) had valid first- and second-year measurements of the study outcomes. Although average changes in these measures over time were small, stratified analyses demonstrated that clinically relevant improvements were achieved in patients with poor first-year health values. Interactions with age, disease duration, comorbidity, and smoking status were not consistent across outcomes; nonetheless, heterogeneity in results decreased considerably when simultaneously correcting for known patient characteristics. Positive effects tended to diminish with longer length of follow-up, while greater measurement frequency was associated with improved results, especially in patients with poor health. Our data suggest that tailored disease management, in which not only evidencebased guidelines but also patient characteristics directly determine care processes, including self-management support, has great potential to improve the cost-effectiveness of current chronic care delivery.

  20. Comparing Homeless Persons’ Care Experiences in Tailored Versus Nontailored Primary Care Programs

    Science.gov (United States)

    Holt, Cheryl L.; Steward, Jocelyn L.; Jones, Richard N.; Roth, David L.; Stringfellow, Erin; Gordon, Adam J.; Kim, Theresa W.; Austin, Erika L.; Henry, Stephen Randal; Kay Johnson, N.; Shanette Granstaff, U.; O’Connell, James J.; Golden, Joya F.; Young, Alexander S.; Davis, Lori L.; Pollio, David E.

    2013-01-01

    Objectives. We compared homeless patients’ experiences of care in health care organizations that differed in their degree of primary care design service tailoring. Methods. We surveyed homeless-experienced patients (either recently or currently homeless) at 3 Veterans Affairs (VA) mainstream primary care settings in Pennsylvania and Alabama, a homeless-tailored VA clinic in California, and a highly tailored non-VA Health Care for the Homeless Program in Massachusetts (January 2011-March 2012). We developed a survey, the “Primary Care Quality-Homeless Survey," to reflect the concerns and aspirations of homeless patients. Results. Mean scores at the tailored non-VA site were superior to those from the 3 mainstream VA sites (P < .001). Adjusting for patient characteristics, these differences remained significant for subscales assessing the patient–clinician relationship (P < .001) and perceptions of cooperation among providers (P = .004). There were 1.5- to 3-fold increased odds of an unfavorable experience in the domains of the patient–clinician relationship, cooperation, and access or coordination for the mainstream VA sites compared with the tailored non-VA site; the tailored VA site attained intermediate results. Conclusions. Tailored primary care service design was associated with a superior service experience for patients who experienced homelessness. PMID:24148052

  1. eHealth and the use of individually tailored information: A systematic review.

    Science.gov (United States)

    Conway, Nicholas; Webster, Clare; Smith, Blair; Wake, Deborah

    2017-09-01

    Tailored messages are those that specifically target individuals following an assessment of their unique characteristics. This systematic review assesses the evidence regarding the effectiveness of tailoring within eHealth interventions aimed at chronic disease management. OVID Medline/Embase databases were searched for randomised control trials, controlled clinical, trials, before -after studies, and time series analyses from inception - May 2014. Objectively measured clinical processes/outcomes were considered. Twenty-two papers were eligible for inclusion: 6/22 used fully tailored messaging and 16/22 used partially tailored messages. Two studies isolated tailoring as the active component. The remainder compared intervention with standard care. In all, 12/16 studies measuring clinical processes and 2/6 studies reporting clinical outcomes showed improvements, regardless of target group. Study quality was low and design did not allow for identification of interventions' active component. Heterogeneity precluded meta-analysis. This review has demonstrated that there is a lack of evidence to suggest that tailoring within an eHealth context confers benefit over non-tailored eHealth interventions.

  2. Tailoring the mode of information presentation: Effects on younger and older adults’ attention and recall of online information

    NARCIS (Netherlands)

    Nguyen, M.H.; van Weert, J.C.M.; Bol, N.; Loos, E.F.; Tytgat, K.M.A.J.; van de Ven, A.W.H.; Smets, E.M.A.

    Previous studies have mainly focused on tailoring message content to match individual characteristics and preferences. Additional strategies, such as tailoring to individual preferences for the mode of information presentation, are proposed to increase message effectiveness. This study investigates

  3. Double-tailored nonimaging reflector optics for maximum-performance solar concentration.

    Science.gov (United States)

    Goldstein, Alex; Gordon, Jeffrey M

    2010-09-01

    A nonimaging strategy that tailors two mirror contours for concentration near the étendue limit is explored, prompted by solar applications where a sizable gap between the optic and absorber is required. Subtle limitations of this simultaneous multiple surface method approach are derived, rooted in the manner in which phase space boundaries can be tailored according to the edge-ray principle. The fundamental categories of double-tailored reflective optics are identified, only a minority of which can pragmatically offer maximum concentration at high collection efficiency. Illustrative examples confirm that acceptance half-angles as large as 30 mrad can be realized at a flux concentration of approximately 1000.

  4. Tailoring a Human Reliability Analysis to Your Industry Needs

    Science.gov (United States)

    DeMott, D. L.

    2016-01-01

    Companies at risk of accidents caused by human error that result in catastrophic consequences include: airline industry mishaps, medical malpractice, medication mistakes, aerospace failures, major oil spills, transportation mishaps, power production failures and manufacturing facility incidents. Human Reliability Assessment (HRA) is used to analyze the inherent risk of human behavior or actions introducing errors into the operation of a system or process. These assessments can be used to identify where errors are most likely to arise and the potential risks involved if they do occur. Using the basic concepts of HRA, an evolving group of methodologies are used to meet various industry needs. Determining which methodology or combination of techniques will provide a quality human reliability assessment is a key element to developing effective strategies for understanding and dealing with risks caused by human errors. There are a number of concerns and difficulties in "tailoring" a Human Reliability Assessment (HRA) for different industries. Although a variety of HRA methodologies are available to analyze human error events, determining the most appropriate tools to provide the most useful results can depend on industry specific cultures and requirements. Methodology selection may be based on a variety of factors that include: 1) how people act and react in different industries, 2) expectations based on industry standards, 3) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 4) type and availability of data, 5) how the industry views risk & reliability, and 6) types of emergencies, contingencies and routine tasks. Other considerations for methodology selection should be based on what information is needed from the assessment. If the principal concern is determination of the primary risk factors contributing to the potential human error, a more detailed analysis method may be employed

  5. Fe-Ag nanocomposites tailored by multilayer deposition

    International Nuclear Information System (INIS)

    Balogh, J.; Kaptas, D.; Kiss, L. F.; Csontos, M.; Mihaly, G.; Temst, K.; Van Haesendonck, C.

    2005-01-01

    Full text: Besides the usual co-deposition methods, thin films of Fe-Ag granular composites can be prepared by alternate deposition of the constituents [1] in the form of granular multilayers when the magnetic layer is discontinuous. The discontinuous Fe layers show superparamagnetic properties that can be tailored [2] by the thickness of both the magnetic and the spacer layers and their magnetization tends to align perpendicular to the sample plain at low temperatures. With following the blocking transition of the superparamagnetic particles by Moessbauer spectroscopy, it was recently shown [2] that continuous magnetic layers can be inserted into the granular multilayer structure without modifying the average magnetic grain size and the almost perpendicular magnetic alignment of the granular layers. The possibility of a simultaneous control over the superparamagnetic grain size, the amount and the stacking sequence of the continuous ferromagnetic layers makes these heterostructures suitable model materials for investigating the role of interactions among the magnetically different elements in nanocomposites. Moessbauer spectroscopy is an effective tool for studying the magnetic properties of the granular and the continuous layers selectively. Comparing the temperature and applied magnetic field dependence of the measured hyperfine fields to the bulk magnetization we found [2] that varying the stacking sequence of the different layers affected the low field magnetic susceptibility of the ferromagnetic layers more significantly than that of the superparamagnetic ones. The magnetoresistance was also shown to depend sensitively [3] on the layer sequence. Interleaved ferromagnetic layers change the shape of the magnetoresistance curves exhibiting a linear variation in small magnetic fields and effect the temperature dependence of the magnetoresistance measured in high magnetic fields. [1] J. Balogh, D. Kaptas, T. Kemeny, L. F. Kiss, T. Pusztai, and I. Vincze, Hyperfine

  6. Birth weight curves tailored to maternal world region.

    Science.gov (United States)

    Ray, Joel G; Sgro, Michael; Mamdani, Muhammad M; Glazier, Richard H; Bocking, Alan; Hilliard, Robert; Urquia, Marcelo L

    2012-02-01

    Newborns of certain immigrant mothers are smaller at birth than those of domestically born mothers. Contemporary, population-derived percentile curves for these newborns are lacking, as are estimates of their risk of being misclassified as too small or too large using conventional rather than tailored birth weight curves. We completed a population-based study of 766 688 singleton live births in Ontario from 2002 to 2007. Smoothed birth weight percentile curves were generated for males and females, categorized by maternal world region of birth: Canada (63.5%), Europe/Western nations (7.6%), Africa/Caribbean (4.9%), Middle East/North Africa (3.4%), Latin America (3.4%), East Asia/Pacific (8.1%), and South Asia (9.2%). We determined the likelihood of misclassifying an infant as small for gestational age (≤ 10th percentile for weight) or as large for gestational age (≥ 90th percentile for weight) on a Canadian-born maternal curve versus one specific to maternal world region of origin. Significantly lower birth weights were seen at gestation-specific 10th, 50th, and 90th percentiles among term infants born to mothers from each world region, with the exception of Europe/Western nations, compared with those for infants of Canadian-born mothers. For example, for South Asian babies born at 40 weeks' gestation, the absolute difference at the 10th percentile was 198 g (95% CI 183 to 212) for males and 170 g (95% CI 161 to 179) for females. Controlling for maternal age and parity, South Asian males had an odds ratio of 2.60 (95% CI 2.53 to 2.68) of being misclassified as small for gestational age, equivalent to approximately 116 in 1000 newborns; for South Asian females the OR was 2.41 (95% CI 2.34 to 2.48), equivalent to approximately 106 per 1000 newborns. Large for gestational age would be missed in approximately 61 per 1000 male and 57 per 1000 female South Asian newborns if conventional rather than ethnicity-specific birth weight curves were used. Birth weight curves

  7. Tailored preconceptional dietary and lifestyle counselling in a tertiary outpatient clinic in the Netherlands

    NARCIS (Netherlands)

    Hammiche, F.; Laven, J.S.E.; Mil, van N.; Cock, M.; Vries, de J.H.M.; Lindemans, J.; Steegers, E.A.P.; Steegers-Theunissen, R.P.M.

    2011-01-01

    BACKGROUND Adverse reproductive performance has been linked to unhealthy dietary intake and lifestyles. Our objectives were to investigate the prevalence of unhealthy dietary intake and lifestyles before conception and to evaluate whether tailored preconception counselling modifies these behaviours.

  8. GIS tailored questionnaires for assisting health care management in distributing resources

    CSIR Research Space (South Africa)

    Herselman, M

    2010-09-01

    Full Text Available A tailored questionnaire focuses on dynamic generation of items and questions according to the location where the questionnaire is used. The approach is connected to the management of resources and the support of decision making processes which...

  9. Tailoring atomic structure to control the electronic transport in zigzag graphene nanoribbon

    International Nuclear Information System (INIS)

    Zeng, Hui; Zhao, Jun; Wei, Jianwei; Zeng, Xianliang; Xu, Yang

    2012-01-01

    We have performed ab initio density functional theory calculation to study the electronic transport properties of the tailored zigzag-edged graphene nanoribbon (ZGNR) with particular electronic transport channels. Our results demonstrated that tailoring the atomic structure had significantly influenced the electronic transport of the defective nanostructures, and could lead to the metal-semiconducting transition when sufficient atoms are tailored. The asymmetric I–V characteristics as a result of symmetry breaking have been exhibited, which indicates the route to utilize GNR as a basic component for novel nanoelectronics. -- Highlights: ► M–S transition induced by tailoring nanostructure. ► Asymmetric I–V curve due to symmetry breaking. ► Controllable electron transport by designing nanofiguration.

  10. Tailoring atomic structure to control the electronic transport in zigzag graphene nanoribbon

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Hui [College of Physical Science and Technology, Yangtze University, Jingzhou, Hubei 434023 (China); Zhao, Jun, E-mail: zhaojun@yangtzeu.edu.cn [College of Physical Science and Technology, Yangtze University, Jingzhou, Hubei 434023 (China); Wei, Jianwei [College of Optoelectronic Information, Chongqing University of Technology, Chongqing 400054 (China); Zeng, Xianliang [College of Physical Science and Technology, Yangtze University, Jingzhou, Hubei 434023 (China); Xu, Yang [Department of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, Zhejiang 310027 (China)

    2012-10-01

    We have performed ab initio density functional theory calculation to study the electronic transport properties of the tailored zigzag-edged graphene nanoribbon (ZGNR) with particular electronic transport channels. Our results demonstrated that tailoring the atomic structure had significantly influenced the electronic transport of the defective nanostructures, and could lead to the metal-semiconducting transition when sufficient atoms are tailored. The asymmetric I–V characteristics as a result of symmetry breaking have been exhibited, which indicates the route to utilize GNR as a basic component for novel nanoelectronics. -- Highlights: ► M–S transition induced by tailoring nanostructure. ► Asymmetric I–V curve due to symmetry breaking. ► Controllable electron transport by designing nanofiguration.

  11. 48 CFR 2912.302 - Tailoring of provisions and clauses for the acquisition of commercial items.

    Science.gov (United States)

    2010-10-01

    ... tailor terms inconsistent with customary commercial practice must be documented in a written justification by the contracting officer, and may be approved by the HCA on an individual or class basis. ...

  12. Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies

    Science.gov (United States)

    Jutte, Christine; Stanford, Bret K.

    2014-01-01

    This paper provides a brief overview of the state-of-the-art for aeroelastic tailoring of subsonic transport aircraft and offers additional resources on related research efforts. Emphasis is placed on aircraft having straight or aft swept wings. The literature covers computational synthesis tools developed for aeroelastic tailoring and numerous design studies focused on discovering new methods for passive aeroelastic control. Several new structural and material technologies are presented as potential enablers of aeroelastic tailoring, including selectively reinforced materials, functionally graded materials, fiber tow steered composite laminates, and various nonconventional structural designs. In addition, smart materials and structures whose properties or configurations change in response to external stimuli are presented as potential active approaches to aeroelastic tailoring.

  13. Improving occupational physicians' adherence to a practice guideline : feasibility and impact of a tailored implementation strategy

    NARCIS (Netherlands)

    Joosen, Margot C. W.; van Beurden, Karlijn M.; Terluin, Berend; van Weeghel, Jaap; Brouwers, Evelien P. M.; van der Klink, Jac J. L.

    2015-01-01

    Background: Although practice guidelines are important tools to improve quality of care, implementation remains challenging. To improve adherence to an evidence-based guideline for the management of mental health problems, we developed a tailored implementation strategy targeting barriers perceived

  14. Multiple soliton self-frequency shift cancellations in a temporally tailored photonic crystal fiber

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Lai; Kang, Zhe; Li, Qing; Gao, Xuejian; Qin, Guanshi, E-mail: qings@jlu.edu.cn, E-mail: wpqin@jlu.edu.cn; Qin, Weiping, E-mail: qings@jlu.edu.cn, E-mail: wpqin@jlu.edu.cn [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Liao, Meisong; Hu, Lili [Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Ohishi, Yasutake [Research Center for Advanced Photon Technology, Toyota Technological Institute, 2-12-1 Hisakata, Tempaku, Nagoya 468-8511 (Japan)

    2014-11-03

    We report the generation of multiple soliton self-frequency shift cancellations in a temporally tailored tellurite photonic crystal fiber (PCF). The temporally regulated group velocity dispersion (GVD) is generated in the fiber by soliton induced optical Kerr effect. Two red-shifted dispersive waves spring up when two Raman solitons meet their own second zero-dispersion-wavelengths in the PCF. These results show how, through temporally tailored GVD, nonlinearities can be harnessed to generate unexpected effects.

  15. Tailoring automatic exposure control toward constant detectability in digital mammography.

    Science.gov (United States)

    Salvagnini, Elena; Bosmans, Hilde; Struelens, Lara; Marshall, Nicholas W

    2015-07-01

    AEC mode in the homogeneous background increased by 62% in going from 20 to 70 mm PMMA thickness; in the structured background, the increase was 39%. Implementation of the modified mode entailed an increase in mAs at PMMA thicknesses >40 mm; the modified AEC held threshold gold thickness constant above 40 mm PMMA with a maximum deviation of 5% in the homogeneous background and 3% in structured background. SDNR was also held constant with a maximum deviation of 4% and 2% for the homogeneous and the structured background, respectively. These results were obtained with an increase of MGD between 15% and 73% going from 40 to 70 mm PMMA thickness. This work has proposed and implemented a modified AEC mode, tailored toward constant detectability at larger breast thickness, i.e., above 40 mm PMMA equivalent. The desired improvement in object detectability could be obtained while maintaining MGD within the European guidelines achievable dose limit. (A study designed to verify the performance of the modified mode using more clinically realistic data is currently underway.).

  16. Tailoring automatic exposure control toward constant detectability in digital mammography

    Energy Technology Data Exchange (ETDEWEB)

    Salvagnini, Elena, E-mail: elena.salvagnini@uzleuven.be [Department of Imaging and Pathology, Medical Physics and Quality Assessment, KUL, Herestraat 49, Leuven B-3000, Belgium and SCK-CEN, Boeretang 200, Mol 2400 (Belgium); Bosmans, Hilde [Department of Imaging and Pathology, Medical Physics and Quality Assessment, KUL, Herestraat 49, Leuven B-3000, Belgium and Department of Radiology, UZ Gasthuisberg, Herestraat 49, Leuven B-3000 (Belgium); Struelens, Lara [SCK-CEN, Boeretang 200, Mol 2400 (Belgium); Marshall, Nicholas W. [Department of Radiology, UZ Gasthuisberg, Herestraat 49, Leuven B-3000 (Belgium)

    2015-07-15

    . Threshold gold thickness (0.1 mm diameter disc) for the default AEC mode in the homogeneous background increased by 62% in going from 20 to 70 mm PMMA thickness; in the structured background, the increase was 39%. Implementation of the modified mode entailed an increase in mAs at PMMA thicknesses >40 mm; the modified AEC held threshold gold thickness constant above 40 mm PMMA with a maximum deviation of 5% in the homogeneous background and 3% in structured background. SDNR was also held constant with a maximum deviation of 4% and 2% for the homogeneous and the structured background, respectively. These results were obtained with an increase of MGD between 15% and 73% going from 40 to 70 mm PMMA thickness. Conclusions: This work has proposed and implemented a modified AEC mode, tailored toward constant detectability at larger breast thickness, i.e., above 40 mm PMMA equivalent. The desired improvement in object detectability could be obtained while maintaining MGD within the European guidelines achievable dose limit. (A study designed to verify the performance of the modified mode using more clinically realistic data is currently underway.)

  17. Context, confidentiality, and consent in tailored health communications: a cautionary note.

    Science.gov (United States)

    Orleans, C T

    1999-01-01

    This article highlights key contextual factors that emerge when the evolution of tailored health communications is viewed against the backdrop of dynamic changes in the nation's health care system--including the shift from fee-for-service medicine to managed care and the proliferation of direct-to-consumer and tailored marketing strategies in the pharmaceutical industry. It focuses on contextual variables with potential to significantly mediate the impact of personally tailored health advice--including those related to confidentiality, privacy, and informed consent and to the perceived aims, intents, and sources of tailored health messages. To protect the future of tailored health messages, more research attention must be given to defining these contextual factors and understanding the roles that they play and the ways in which they can be controlled to assure the best outcomes. Such research could point the way towards a set of empirical and ethical "best practices" based on a scientific understanding of how to maximize the benefits, and minimize the potential harms, of the widescale use of tailored health communications.

  18. Testing a Dutch web-based tailored lifestyle programme among adults: a study protocol

    Directory of Open Access Journals (Sweden)

    van Osch Liesbeth ADM

    2011-02-01

    Full Text Available Abstract Background Smoking, high alcohol consumption, unhealthy eating habits and physical inactivity often lead to (chronic diseases, such as cardiovascular diseases and cancer. Tailored online interventions have been proven to be effective in changing health behaviours. The aim of this study is to test and compare the effectiveness of two different tailoring strategies for changing lifestyle compared to a control group using a multiple health behaviour web-based approach. Methods In our Internet-based tailored programme, the five lifestyle behaviours of smoking, alcohol intake, fruit consumption, vegetable consumption, and physical activity are addressed. This randomized controlled trial, conducted among Dutch adults, includes two experimental groups (i.e., a sequential behaviour tailoring condition and a simultaneous behaviour tailoring condition and a control group. People in the sequential behaviour tailoring condition obtain feedback on whether their lifestyle behaviours meet the Dutch recommendations. Using a step-by-step approach, they are stimulated to continue with a computer tailored module to change only one unhealthy behaviour first. In the course of the study, they can proceed to change a second behaviour. People in the simultaneous behaviour tailoring condition receive computer tailored feedback about all their unhealthy behaviours during their first visit as a stimulation to change all unhealthy behaviours. The experimental groups can re-visit the website and can then receive ipsative feedback (i.e., current scores are compared to previous scores in order to give feedback about potential changes. The (difference in effectiveness of the different versions of the programme will be tested and compared to a control group, in which respondents only receive a short health risk appraisal. Programme evaluations will assess satisfaction with and appreciation and personal relevance of the intervention among the respondents. Finally

  19. Proposal for the award of two contracts for the supply of fine-blanked low-carbon steel yoke laminations and inserts for the cold masses of the LHC superconducting dipole magnets

    CERN Document Server

    1999-01-01

    This document concerns the award of two contracts for the supply of 5 812 000 fine-blanked low-carbon steel yoke laminations, of two different types, and 5 800 000 inserts for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in sixteen Member States and one firm in Japan, a call for tenders (IT-2467/LHC/LHC) was sent on 3 June 1999 to seven firms in four Member States. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - FUG (DE) for the supply of 3 632 000 fine-blanked low-carbon steel yoke laminations and 3 625 000 inserts, which represents 5/8 of the total quantity required for the cold masses of the LHC superconducting dipole magnets, for a total amount of 2 525 563 euros, which at the exchange rate given in the tender correspond to 4 019 038 Swiss francs, subject to revision for contractual deliveries after 31 December 2001, with an option for the supply of ...

  20. Proposal for the award of two contracts for the supply of fine-blanked austenitic steel yoke laminations and inserts for the cold masses of the LHC superconducting dipole magnets

    CERN Document Server

    1999-01-01

    This document concerns the award of two contracts for the total supply of 642 000 fine-blanked austenitic steel yoke laminations, of two different types, and 642 000 inserts for the cold masses of the LHC superconducting dipole magnets. Following a market survey carried out among 70 firms in sixteen Member States and one firm in Japan, a call for tenders (IT-2700/LHC/LHC) was sent on 3 June 1999 to seven firms in four Member States and one firm in Japan. By the closing date, CERN had received five tenders. The Finance Committee is invited to agree to the negotiation of two contracts with: - ELAY INDUSTRIAL (ES) for the supply of 324 000 fine-blanked austenitic steel yoke laminations of the first type and the corresponding number of inserts, which represents the total required quantity of laminations of the first type and of corresponding inserts for the cold masses of the LHC superconducting dipole magnets, for a total amount of 481 814 euros, which at the exchange rate given in the tender correspond to 770 8...

  1. Effectiveness of culturally tailored diabetes interventions for Asian immigrants to the United States: a systematic review.

    Science.gov (United States)

    Joo, Jee Young

    2014-01-01

    The purpose of this systematic review is to evaluate the effectiveness of tailoring community-based diabetes intervention to Asian immigrant cultures. The Cochrane processes and Preferred Reporting Items for Systematic Reviews and Meta-Analyses recommendations guided this systematic review. PubMed, the Cumulative Index to Nursing and Allied Health Literature, Ovid, and PsycINFO were searched for analyses and syntheses of primary research published since 2000 that described interventions tailored for the cultures of Asian immigrants with diabetes. This search yielded a total of 9 articles published from 2005 to 2013. The Amsterdam-Maastricht Consensus List for Quality Assessment was used to assess the quality of the studies. Retrieved studies' populations were foreign-born adults >50 years of age with type 2 diabetes. The review revealed that culturally tailored diabetes programs are effective at improving patients' objectively measured clinical outcomes, in particular A1C levels, and psychobehavioral outcomes. Patients were also highly satisfied with bilingual health care providers and bilingual educational programs. There is strong evidence of the effectiveness of tailoring diabetes interventions to Asian immigrant populations' cultures. Further studies, including longitudinal studies and studies with rigorous research designs that subclassify Asian immigrants, are needed to encourage the implementation of culturally tailored diabetes intervention for this ethnic minority. © 2014 The Author(s).

  2. Tailored motivational message generation: A model and practical framework for real-time physical activity coaching.

    Science.gov (United States)

    Op den Akker, Harm; Cabrita, Miriam; Op den Akker, Rieks; Jones, Valerie M; Hermens, Hermie J

    2015-06-01

    This paper presents a comprehensive and practical framework for automatic generation of real-time tailored messages in behavior change applications. Basic aspects of motivational messages are time, intention, content and presentation. Tailoring of messages to the individual user may involve all aspects of communication. A linear modular system is presented for generating such messages. It is explained how properties of user and context are taken into account in each of the modules of the system and how they affect the linguistic presentation of the generated messages. The model of motivational messages presented is based on an analysis of existing literature as well as the analysis of a corpus of motivational messages used in previous studies. The model extends existing 'ontology-based' approaches to message generation for real-time coaching systems found in the literature. Practical examples are given on how simple tailoring rules can be implemented throughout the various stages of the framework. Such examples can guide further research by clarifying what it means to use e.g. user targeting to tailor a message. As primary example we look at the issue of promoting daily physical activity. Future work is pointed out in applying the present model and framework, defining efficient ways of evaluating individual tailoring components, and improving effectiveness through the creation of accurate and complete user- and context models. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Tailorable and Wearable Textile Devices for Solar Energy Harvesting and Simultaneous Storage.

    Science.gov (United States)

    Chai, Zhisheng; Zhang, Nannan; Sun, Peng; Huang, Yi; Zhao, Chuanxi; Fan, Hong Jin; Fan, Xing; Mai, Wenjie

    2016-10-05

    The pursuit of harmonic combination of technology and fashion intrinsically points to the development of smart garments. Herein, we present an all-solid tailorable energy textile possessing integrated function of simultaneous solar energy harvesting and storage, and we call it tailorable textile device. Our technique makes it possible to tailor the multifunctional textile into any designed shape without impairing its performance and produce stylish smart energy garments for wearable self-powering system with enhanced user experience and more room for fashion design. The "threads" (fiber electrodes) featuring tailorability and knittability can be large-scale fabricated and then woven into energy textiles. The fiber supercapacitor with merits of tailorability, ultrafast charging capability, and ultrahigh bending-resistance is used as the energy storage module, while an all-solid dye-sensitized solar cell textile is used as the solar energy harvesting module. Our textile sample can be fully charged to 1.2 V in 17 s by self-harvesting solar energy and fully discharged in 78 s at a discharge current density of 0.1 mA.

  4. Energy conservation through behavioral change. Examining the effectiveness of a tailor-made approach

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamse, W.

    2007-12-06

    Households constitute an important target group when it comes to encouraging energy conservation. This dissertation provides an overview of the effectiveness of interventions aimed at encouraging households to reduce their energy use through behavioral changes. It also provides more insight into the factors related to household energy use and conservation. Tailored interventions in particular appear to be effective in reducing energy consumption. Households were given tailored information about energy saving measures they could apply. They were asked to try and save 5% energy and the website indicated how much energy they could save with each measure to attain that goal. Households also received feedback about their energy savings. Households who received the combination of tailored information, goal setting and tailored feedback via the Internet saved 5%, while households in a control group used more energy. Households had adopted more energy-saving measures and had more knowledge of energy conservation, compared to the control group. Also, household energy consumption appeared to be mainly related to socio-demographic variables, such as income and household size. Energy savings appeared to be mainly related to individual factors like perceived behavioral control. If the aim is to encourage households to adopt more sustainable lifestyles, it is important to provide them with more insight into which energy saving options are most effective for them to conserve energy. In view of the annual energy reduction targets set by the Dutch government, a tailor-made approach via the Internet can be an important step in that direction.

  5. Underwater Leidenfrost nanochemistry for creation of size-tailored zinc peroxide cancer nanotherapeutics

    Science.gov (United States)

    Elbahri, Mady; Abdelaziz, Ramzy; Disci-Zayed, Duygu; Homaeigohar, Shahin; Sosna, Justyna; Adam, Dieter; Kienle, Lorenz; Dankwort, Torben; Abdelaziz, Moheb

    2017-05-01

    The dynamic underwater chemistry seen in nature is inspiring for the next generation of eco-friendly nanochemistry. In this context, green synthesis of size-tailored nanoparticles in a facile and scalable manner via a dynamic process is an interesting challenge. Simulating the volcano-induced dynamic chemistry of the deep ocean, here we demonstrate the Leidenfrost dynamic chemistry occurring in an underwater overheated confined zone as a new tool for customized creation of nanoclusters of zinc peroxide. The hydrodynamic nature of the phenomenon ensures eruption of the nanoclusters towards a much colder region, giving rise to growth of monodisperse, size-tailored nanoclusters. Such nanoparticles are investigated in terms of their cytotoxicity on suspension and adherent cells to prove their applicability as cancer nanotherapeutics. Our research can pave the way for employment of the dynamic green nanochemistry in facile, scalable fabrication of size-tailored nanoparticles for biomedical applications.

  6. Tailor-Made Additives for Morphology Control in Molecular Bulk-Heterojunction Photovoltaics

    KAUST Repository

    Graham, Kenneth R.

    2013-01-09

    Tailor-made additives, which are molecules that share the same molecular structure as a parent molecule with only slight structural variations, have previously been demonstrated as a useful means to control crystallization dynamics in solution. For example, tailor-made additives can be added to solutions of a crystallizing parent molecule to alter the crystal growth rate, size, and shape. We apply this strategy as a means to predictably control morphology in molecular bulk-heterojunction (BHJ) photovoltaic cells. Through the use of an asymmetric oligomer substituted with a bulky triisobutylsilyl end group, the morphology of BHJ blends can be controlled resulting in a near doubling (from 1.3 to 2.2%) in power conversion efficiency. The use of tailor-made additives provides promising opportunities for controlling crystallization dynamics, and thereby film morphologies, for many organic electronic devices such as photovoltaics and field-effect transistors. © 2012 American Chemical Society.

  7. Tailoring surface groups of carbon quantum dots to improve photoluminescence behaviors

    International Nuclear Information System (INIS)

    Tian, Ruixue; Hu, Shengliang; Wu, Lingling; Chang, Qing; Yang, Jinlong; Liu, Jun

    2014-01-01

    Highlights: • We develop a facile and green method to tailor surface groups. • Photoluminescence behaviors of carbon quantum dots are improved by tailoring their surface groups. • Highly luminescent efficiency is produced by amino-hydrothermal treatment of reduced carbon quantum dots. - Abstract: A facile and green method to tailor surface groups of carbon quantum dots (CQDs) is developed by hydrothermal treatment in an autoclave. The photoluminescence (PL) behaviors of CQDs depend on the types of surface groups. Highly efficient photoluminescence is obtained through amino-hydrothermal treatment of the CQDs reduced by NaBH 4 . The effects of surface groups on PL behavior are attributed to the degrees of energy band bending induced by surface groups

  8. Tailor-Made Additives for Morphology Control in Molecular Bulk-Heterojunction Photovoltaics

    KAUST Repository

    Graham, Kenneth R.; Stalder, Romain; Wieruszewski, Patrick M.; Patel, Dinesh G.; Salazar, Danielle H.; Reynolds, John R.

    2013-01-01

    Tailor-made additives, which are molecules that share the same molecular structure as a parent molecule with only slight structural variations, have previously been demonstrated as a useful means to control crystallization dynamics in solution. For example, tailor-made additives can be added to solutions of a crystallizing parent molecule to alter the crystal growth rate, size, and shape. We apply this strategy as a means to predictably control morphology in molecular bulk-heterojunction (BHJ) photovoltaic cells. Through the use of an asymmetric oligomer substituted with a bulky triisobutylsilyl end group, the morphology of BHJ blends can be controlled resulting in a near doubling (from 1.3 to 2.2%) in power conversion efficiency. The use of tailor-made additives provides promising opportunities for controlling crystallization dynamics, and thereby film morphologies, for many organic electronic devices such as photovoltaics and field-effect transistors. © 2012 American Chemical Society.

  9. Material and Thickness Grading for Aeroelastic Tailoring of the Common Research Model Wing Box

    Science.gov (United States)

    Stanford, Bret K.; Jutte, Christine V.

    2014-01-01

    This work quantifies the potential aeroelastic benefits of tailoring a full-scale wing box structure using tailored thickness distributions, material distributions, or both simultaneously. These tailoring schemes are considered for the wing skins, the spars, and the ribs. Material grading utilizes a spatially-continuous blend of two metals: Al and Al+SiC. Thicknesses and material fraction variables are specified at the 4 corners of the wing box, and a bilinear interpolation is used to compute these parameters for the interior of the planform. Pareto fronts detailing the conflict between static aeroelastic stresses and dynamic flutter boundaries are computed with a genetic algorithm. In some cases, a true material grading is found to be superior to a single-material structure.

  10. The use of instrumented gait analysis for individually tailored interdisciplinary interventions in children with cerebral palsy

    DEFF Research Database (Denmark)

    Rasmussen, Helle Mätzke; Pedersen, Niels Wisbech; Overgaard, Søren

    2015-01-01

    in gait following individually tailored interventions when IGA is used are superior to those following ‘care as usual’. Methods/Design A prospective, single blind, randomised, parallel group study will be conducted. Children aged 5 to 8 years with spastic CP, classified at Gross Motor Function...... Classification System levels I or II, will be included. The interventions under investigation are: 1) individually tailored interdisciplinary interventions based on the use of IGA, and 2) ‘care as usual’. The primary outcome is gait measured by the Gait Deviation Index. Secondary outcome measures are: walking......Abstract Background Children with cerebral palsy (CP) often have an altered gait. Orthopaedic surgery, spasticity management, physical therapy and orthotics are used to improve the gait. Interventions are individually tailored and are planned on the basis of clinical examinations and standardised...

  11. Tailoring double Fano profiles with plasmon-assisted quantum interference in hybrid exciton-plasmon system

    International Nuclear Information System (INIS)

    Zhao, Dongxing; Wu, Jiarui; Gu, Ying; Gong, Qihuang

    2014-01-01

    We propose tailoring of the double Fano profiles via plasmon-assisted quantum interference in a hybrid exciton-plasmon system. Tailoring is performed by the interference between two exciton channels interacting with a common localized surface plasmon. Using an applied field of low intensity, the absorption spectrum of the hybrid system reveals a double Fano lineshape with four peaks. For relatively large field intensity, a broad flat window in the absorption spectrum appears which results from the destructive interference between excitons. Because of strong constructive interference, this window vanishes as intensity is further increased. We have designed a nanometer bandpass optical filter for visible light based on tailoring of the optical spectrum. This study provides a platform for quantum interference that may have potential applications in ultracompact tunable quantum devices.

  12. Tailoring intervention procedures to routine primary health care practice; an ethnographic process evaluation

    Directory of Open Access Journals (Sweden)

    Bruijnzeels Marc

    2007-08-01

    Full Text Available Abstract Background Tailor-made approaches enable the uptake of interventions as they are seen as a way to overcome the incompatibility of general interventions with local knowledge about the organisation of routine medical practice and the relationship between the patients and the professionals in practice. Our case is the Quattro project which is a prevention programme for cardiovascular diseases in high-risk patients in primary health care centres in deprived neighbourhoods. This programme was implemented as a pragmatic trial and foresaw the importance of local knowledge in primary health care and internal, or locally made, guidelines. The aim of this paper is to show how this prevention programme, which could be tailored to routine care, was implemented in primary care. Methods An ethnographic design was used for this study. We observed and interviewed the researchers and the practice nurses. All the research documents, observations and transcribed interviews were analysed thematically. Results Our ethnographic process evaluation showed that the opportunity of tailoring intervention procedures to routine care in a pragmatic trial setting did not result in a well-organised and well-implemented prevention programme. In fact, the lack of standard protocols hindered the implementation of the intervention. Although it was not the purpose of this trial, a guideline was developed. Despite the fact that the developed guideline functioned as a tool, it did not result in the intervention being organised accordingly. However, the guideline did make tailoring the intervention possible. It provided the professionals with the key or the instructions needed to achieve organisational change and transform the existing interprofessional relations. Conclusion As tailor-made approaches are developed to enable the uptake of interventions in routine practice, they are facilitated by the brokering of tools such as guidelines. In our study, guidelines facilitated

  13. Tailoring of magnetic anisotropy of Fe-rich microwires by stress induced anisotropy

    International Nuclear Information System (INIS)

    Zhukov, A.; Zhukova, V.; Larin, V.; Gonzalez, J.

    2006-01-01

    We report on tailoring of magnetic properties and GMI of Fe 69 B 12 Si 14 C 5 glass-coated microwires by stress annealing. The induced magnetic anisotropy field depend on temperature and time of annealing and applied stress. At certain conditions considerable GMI effect (up to 65%) has been achieved. Application of the tensile stress drastically affects the shape of the hysteresis loop of stress-annealed sample and its GMI effect. In this way the shape of the hysteresis loop and GMI effect can by tailored by controllable way

  14. Dispersion tailoring of a silicon strip waveguide employing Titania-Alumina thin-film coating

    DEFF Research Database (Denmark)

    Guo, Kai; Christensen, Jesper B.; Christensen, Erik N.

    2017-01-01

    We numerically demonstrate dispersion tailoring of a silicon strip waveguide employing Titania-Alumina thin-film coating using a finite-difference mode solver. The proposed structure exhibits spectrally-flattened near-zero anomalous dispersion within the telecom wavelength range. We also numerica......We numerically demonstrate dispersion tailoring of a silicon strip waveguide employing Titania-Alumina thin-film coating using a finite-difference mode solver. The proposed structure exhibits spectrally-flattened near-zero anomalous dispersion within the telecom wavelength range. We also...

  15. High Excitation Efficiency of Channel Plasmon Polaritons in Tailored, UV-Lithography-Defined V-Grooves

    DEFF Research Database (Denmark)

    Smith, Cameron; Thilsted, Anil Haraksingh; Garcia-Ortiz, Cesar E.

    2014-01-01

    We demonstrate >50% conversion of light to V-groove channel plasmon-polaritons (CPPs) via compact waveguide-termination mirrors. Devices are fabricated using UV-lithography and crystallographic silicon etching. The V-shape is tailored by thermal oxidation to support confined CPPs.......We demonstrate >50% conversion of light to V-groove channel plasmon-polaritons (CPPs) via compact waveguide-termination mirrors. Devices are fabricated using UV-lithography and crystallographic silicon etching. The V-shape is tailored by thermal oxidation to support confined CPPs....

  16. Personally tailored activities for improving psychosocial outcomes for people with dementia in long-term care.

    Science.gov (United States)

    Möhler, Ralph; Renom, Anna; Renom, Helena; Meyer, Gabriele

    2018-02-13

    People with dementia who are being cared for in long-term care settings are often not engaged in meaningful activities. Offering them activities which are tailored to their individual interests and preferences might improve their quality of life and reduce challenging behaviour. ∙ To assess the effects of personally tailored activities on psychosocial outcomes for people with dementia living in long-term care facilities.∙ To describe the components of the interventions.∙ To describe conditions which enhance the effectiveness of personally tailored activities in this setting. We searched ALOIS, the Cochrane Dementia and Cognitive Improvement Group's Specialized Register, on 16 June 2017 using the terms: personally tailored OR individualized OR individualised OR individual OR person-centred OR meaningful OR personhood OR involvement OR engagement OR engaging OR identity. We also performed additional searches in MEDLINE (Ovid SP), Embase (Ovid SP), PsycINFO (Ovid SP), CINAHL (EBSCOhost), Web of Science (ISI Web of Science), ClinicalTrials.gov, and the World Health Organization (WHO) ICTRP, to ensure that the search for the review was as up to date and as comprehensive as possible. We included randomised controlled trials and controlled clinical trials offering personally tailored activities. All interventions included an assessment of the participants' present or past preferences for, or interests in, particular activities as a basis for an individual activity plan. Control groups received either usual care or an active control intervention. Two authors independently checked the articles for inclusion, extracted data and assessed the methodological quality of included studies. For all studies, we assessed the risk of selection bias, performance bias, attrition bias and detection bias. In case of missing information, we contacted the study authors. We included eight studies with 957 participants. The mean age of participants in the studies ranged from 78 to 88

  17. Personalization and perceived personal relevance in computer-tailored persuasion in smoking cessation

    NARCIS (Netherlands)

    Dijkstra, Arie; Ballast, Karien

    Objectives. In most computer-tailored interventions, the recipient's name is used to personalize the information. This is done to increase the process of persuasion but few empirical data exist that support this notion. yDesign. An experimental laboratory study was conducted to test the effects of

  18. Incredible Years Program Tailored to Parents of Preschoolers with Autism: Pilot Results

    Science.gov (United States)

    Dababnah, Sarah; Parish, Susan L.

    2016-01-01

    Objective: This article reports on the acceptability and results from an evaluation of an empirically supported practice, The Incredible Years, tailored to parents of children with autism spectrum disorder (ASD). Methods: Two groups of parents (N = 17) participated in a mixed methods test with no comparison group of the 15-week intervention. Data…

  19. Improving the implementation of tailored expectant management in subfertile couples: protocol for a cluster randomized trial

    NARCIS (Netherlands)

    Boogaard, N.M. van den; Kersten, F.A.M.; Goddijn, M.; Bossuyt, P.M.; Veen, F. van der; Hompes, P.G.; Hermens, R.P.M.G.; Braat, D.D.M.; Mol, B.W.; Nelen, W.L.D.M.; et al.,

    2013-01-01

    BACKGROUND: Prognostic models in reproductive medicine can help to identify subfertile couples who would benefit from fertility treatment. Expectant management in couples with a good chance of natural conception, i.e., tailored expectant management (TEM), prevents unnecessary treatment and is

  20. Improving the implementation of tailored expectant management in subfertile couples : protocol for a cluster randomized trial

    NARCIS (Netherlands)

    van den Boogaard, Noortje M; Kersten, Fleur A M; Goddijn, Mariëtte; Bossuyt, Patrick M M; van der Veen, Fulco; Hompes, Peter G A; Hermens, Rosella P M G; Braat, Didi D M; Mol, Ben Willem J; Nelen, Willianne L D M; Hoek, Annemieke

    2013-01-01

    BACKGROUND: Prognostic models in reproductive medicine can help to identify subfertile couples who would benefit from fertility treatment. Expectant management in couples with a good chance of natural conception, i.e., tailored expectant management (TEM), prevents unnecessary treatment and is

  1. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    International Nuclear Information System (INIS)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    A successive anchoring of Ti(NMe 2 ) 4 , cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, 13 C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands. - Graphical abstract: The ligand-tailored silica supported “single site” titanium complexes were synthesized by SOMC strategy and fully characterized. Their catalytic activity were evaluated by benzaldehyde silylcyanation. - Highlights: • Single-site silica supported Ti active species was prepared by SOMC technique. • O-donor ligand tailored Ti surface species was synthesized. • The surface species was characterized by XPS, 13 C CP-MAS NMR, XANES etc. • Catalytic activity of the Ti active species in silylcyanation reaction was evaluated

  2. Basic Needs, Stress and the Effects of Tailored Health Communication in Vulnerable Populations

    Science.gov (United States)

    Cappelletti, Erika R.; Kreuter, Matthew W.; Boyum, Sonia; Thompson, Tess

    2015-01-01

    This study examined whether unmet basic needs (food, housing, personal and neighborhood safety, money for necessities) and perceived stress affect recall of and response to a tailored print intervention one month later. Participants (N = 372) were adults who had called 2-1-1 Missouri between June 2010 and June 2012. A series of path analyses using…

  3. Tailored treatment strategies : a new approach for modern management of atrial fibrillation

    NARCIS (Netherlands)

    Van Gelder, I. C.; Hobbelt, A. H.; Marcos, E. G.; Schotten, U.; Cappato, R.; Lewalter, T.; Schwieler, J.; Rienstra, M.; Boriani, G.

    Atrial fibrillation (AF) is not benign. Cardiovascular diseases and risk factors differ importantly amongst patients. Careful phenotyping with the aim to start tailored therapy may improve outcome and quality of life. Furthermore, structural remodelling plays an important role in initiation and

  4. 48 CFR 12.302 - Tailoring of provisions and clauses for the acquisition of commercial items.

    Science.gov (United States)

    2010-10-01

    ... practice is inconsistent with the needs of the Government. A waiver may be requested for an individual or... relative volume of the Government's acquisitions in the specific market, contracting officers may, within... inconsistent with customary commercial practice. The contracting officer shall not tailor any clause or...

  5. Tailored approach to management of bilateral breast cancer in Indian women

    Directory of Open Access Journals (Sweden)

    Veda Padma Priya Selvakumar

    2015-01-01

    Conclusions: The management of BCC is complex and has to be tailored to the individual based on characteristics of index and second tumor, prior therapy, adjuvant treatment, and risk stratification. Moreover, the concordance of receptor expression is higher in synchronous cancers than metachronous cancers.

  6. Tailor-Made News: Meeting the demands of news users on mobile and social media

    NARCIS (Netherlands)

    Groot Kormelink, T.; Costera Meijer, I.

    2014-01-01

    Despite the technological possibilities for portable, personalized, and participatory news use, the public has not turned en masse from passive receivers who consume news on the producers' terms, into active users who tailor news to fit their personal preferences and practices. Unmistakably, some

  7. Overcoming incompatibility in elastomer blends by rubber additives with tailored surface properties

    NARCIS (Netherlands)

    Tiwari, M.; Datta, Rabin; Guo, R.; Talma, Auke; van Ooij, W.J.; Dierkes, Wilma K.; Noordermeer, Jacobus W.M.

    2014-01-01

    Rubber is a challenging composite material, whose functionality strongly depends on the affinity of the different materials in the composite, and its morphology. One way to tailor polarity and chemistry of the filler surface is plasma coating. When using acetylene, thiophene, or pyrrole as monomers,

  8. Overcoming Incompatibility Problems in Elastomer Blends by Tailored Surface Properties of Rubber Additives

    NARCIS (Netherlands)

    Dierkes, Wilma K.; Tiwari, M.; Guo, R.; Datta, Rabin; Talma, Auke; Noordermeer, Jacobus W.M.; van Ooij, W.J.

    2013-01-01

    Rubber is a challenging composite material, whose functionality strongly depends on the affinity of the different materials in the composite and its morphology. One way to tailor polarity and chemistry of the filler surface is plasma coating. When using acetylene, thiophene, or pyrrole as monomers,

  9. Shape-Tailorable Graphene-Based Ultra-High-Rate Supercapacitor for Wearable Electronics.

    Science.gov (United States)

    Xie, Binghe; Yang, Cheng; Zhang, Zhexu; Zou, Peichao; Lin, Ziyin; Shi, Gaoquan; Yang, Quanhong; Kang, Feiyu; Wong, Ching-Ping

    2015-06-23

    With the bloom of wearable electronics, it is becoming necessary to develop energy storage units, e.g., supercapacitors that can be arbitrarily tailored at the device level. Although gel electrolytes have been applied in supercapacitors for decades, no report has studied the shape-tailorable capability of a supercapacitor, for instance, where the device still works after being cut. Here we report a tailorable gel-based supercapacitor with symmetric electrodes prepared by combining electrochemically reduced graphene oxide deposited on a nickel nanocone array current collector with a unique packaging method. This supercapacitor with good flexibility and consistency showed excellent rate performance, cycling stability, and mechanical properties. As a demonstration, these tailorable supercapacitors connected in series can be used to drive small gadgets, e.g., a light-emitting diode (LED) and a minimotor propeller. As simple as it is (electrochemical deposition, stencil printing, etc.), this technique can be used in wearable electronics and miniaturized device applications that require arbitrarily shaped energy storage units.

  10. A Brief Culturally Tailored Intervention for Puerto Ricans with Type 2 Diabetes

    Science.gov (United States)

    Osborn, Chandra Y.; Amico, K. R.; Cruz, Noemi; O'Connell, Ann A.; Perez-Escamilla, Rafael; Kalichman, Seth C.; Wolf, Scott A.; Fisher, Jeffrey D.

    2010-01-01

    The information-motivation-behavioral skills (IMB) model of health behavior change informed the design of a brief, culturally tailored diabetes self-care intervention for Puerto Ricans with type 2 diabetes. Participants (n = 118) were recruited from an outpatient, primary care clinic at an urban hospital in the northeast United States. ANCOVA…

  11. Hydro-Elastic Tailoring and Optimization of a Composite Marine Propeller

    DEFF Research Database (Denmark)

    Blasques, José Pedro Albergaria Amaral; Berggreen, Christian; Andersen, Poul

    2008-01-01

    The following paper deals with the design and optimization of a flexible composite marine propeller. The blade shape is obtained from an existing high skew metal propeller. The aim is to tailor the laminate to control the elastic couplings and therefore the deformed shape of the blade. The develo...

  12. Experimentally validated dispersion tailoring in a silicon strip waveguide with alumina thin-film coating

    DEFF Research Database (Denmark)

    Guo, Kai; Christensen, Jesper Bjerge; Shi, Xiaodong

    2018-01-01

    We propose a silicon strip waveguide structure with alumina thin-film coating in-between the core and the cladding for group-velocity dispersion tailoring. By carefully designing the core dimension and the coating thickness, a spectrally-flattened near-zero anomalous group-velocity dispersion...

  13. 48 CFR 3046.791-2 - Tailoring warranty terms and conditions (USCG).

    Science.gov (United States)

    2010-10-01

    ... appropriately tailor the warranty on a case-by-case basis, including remedies, exclusions, limitations and... warranty certain defects for specified supplies (exclusions) and may limit the contractor's liability under... had not designed the system). (d) Contracting officers shall not include in a warranty clause any...

  14. Customizing learning programs to the organization and its emplyees : How HRD practitioners create tailored learning programs

    NARCIS (Netherlands)

    Poell, R.F.; van der Krogt, F.J.

    2005-01-01

    This study investigates how HRD practitioners customise learning programs, that is, tailor them to take into account the demands set by organisation and participants. A theoretical account of the relations between learning programmes and organisational/individual characteristics is provided. Results

  15. Using Cognitive Load Theory to Tailor Instruction to Levels of Accounting Students' Expertise

    Science.gov (United States)

    Blayney, Paul; Kalyuga, Slava; Sweller, John

    2015-01-01

    Tailoring of instructional methods to learner levels of expertise may reduce extraneous cognitive load and improve learning. Contemporary technology-based learning environments have the potential to substantially enable learner-adapted instruction. This paper investigates the effects of adaptive instruction based on using the isolated-interactive…

  16. What’s in a Surname? Physique, Aptitude, and Sports Type Comparisons between Tailors and Smiths

    Science.gov (United States)

    Voracek, Martin; Rieder, Stephan; Stieger, Stefan; Swami, Viren

    2015-01-01

    Combined heredity of surnames and physique, coupled with past marriage patterns and trade-specific physical aptitude and selection factors, may have led to differential assortment of bodily characteristics among present-day men with specific trade-reflecting surnames (Tailor vs. Smith). Two studies reported here were partially consistent with this genetic-social hypothesis, first proposed by Bäumler (1980). Study 1 (N = 224) indicated significantly higher self-rated physical aptitude for prototypically strength-related activities (professions, sports, hobbies) in a random sample of Smiths. The counterpart effect (higher aptitude for dexterity-related activities among Tailors) was directionally correct, but not significant, and Tailor-Smith differences in basic physique variables were nil. Study 2 examined two large total-population-of-interest datasets (Austria/Germany combined, and UK: N = 7001 and 20532) of men’s national high-score lists for track-and-field events requiring different physiques. In both datasets, proportions of Smiths significantly increased from light-stature over medium-stature to heavy-stature sports categories. The predicted counterpart effect (decreasing prevalences of Tailors along these categories) was not supported. Related prior findings, the viability of possible alternative interpretations of the evidence (differential positive selection for trades and occupations, differential endogamy and assortative mating patterns, implicit egotism effects), and directions for further inquiry are discussed in conclusion. PMID:26161803

  17. What's in a Surname? Physique, Aptitude, and Sports Type Comparisons between Tailors and Smiths.

    Science.gov (United States)

    Voracek, Martin; Rieder, Stephan; Stieger, Stefan; Swami, Viren

    2015-01-01

    Combined heredity of surnames and physique, coupled with past marriage patterns and trade-specific physical aptitude and selection factors, may have led to differential assortment of bodily characteristics among present-day men with specific trade-reflecting surnames (Tailor vs. Smith). Two studies reported here were partially consistent with this genetic-social hypothesis, first proposed by Bäumler (1980). Study 1 (N = 224) indicated significantly higher self-rated physical aptitude for prototypically strength-related activities (professions, sports, hobbies) in a random sample of Smiths. The counterpart effect (higher aptitude for dexterity-related activities among Tailors) was directionally correct, but not significant, and Tailor-Smith differences in basic physique variables were nil. Study 2 examined two large total-population-of-interest datasets (Austria/Germany combined, and UK: N = 7001 and 20,532) of men's national high-score lists for track-and-field events requiring different physiques. In both datasets, proportions of Smiths significantly increased from light-stature over medium-stature to heavy-stature sports categories. The predicted counterpart effect (decreasing prevalences of Tailors along these categories) was not supported. Related prior findings, the viability of possible alternative interpretations of the evidence (differential positive selection for trades and occupations, differential endogamy and assortative mating patterns, implicit egotism effects), and directions for further inquiry are discussed in conclusion.

  18. From nanofabrication to self-fabrication--tailored chemistry for control of single molecule electronic devices

    DEFF Research Database (Denmark)

    Moth-Poulsen, Kasper; Bjørnholm, Thomas

    2010-01-01

    as alternatives to the dominant top-down nanofabrication techniques. One example is solution-based self-assembly of a molecule enclosed by two gold nanorod electrodes. This article will discuss recent attempts to control the self-assembly process by the use of supramolecular chemistry and how to tailor...

  19. Optimizing Tailored Health Promotion for Older Adults : Understanding Their Perspectives on Healthy Living

    NARCIS (Netherlands)

    Marcus-Varwijk, Anne Esther; Koopmans, Marg; Visscher, Tommy L S; Seidell, Jacob C; Slaets, Joris P J; Smits, Carolien H M

    2017-01-01

    Objective: This study explores older adults' perspectives on healthy living, and their interactions with professionals regarding healthy living. This perspective is necessary for health professionals when they engage in tailored health promotion in their daily work routines. Method: In a qualitative

  20. Tailored Communications for Obesity Prevention in Pediatric Primary Care: A Feasibility Study

    Science.gov (United States)

    Wright, Julie A.; Whiteley, Jessica A.; Watson, Bonnie L.; Sheinfeld Gorin, Sherri N.; Hayman, Laura L.

    2018-01-01

    Recommendations for the prevention of childhood obesity encourage providers to counsel parents and their children on healthy diet and activity behaviors. This study evaluated the feasibility of a theory-based, tailored communication intervention for obesity prevention ("Team Up for Health") delivered during a well-child visit. A…

  1. Efficacy of 'Tailored Physical Activity' in reducing sickness absence among health care workers

    DEFF Research Database (Denmark)

    Nygaard Andersen, Lotte; Juul-Kristensen, Birgit; Roessler, Kirsten Kaya

    2013-01-01

    Health care workers have high physical work demands, involving patient handling and manual work tasks. A strategy for prevention of work-related musculoskeletal disorders can enhance the physical capacity of the health care worker. The aim of this study is to evaluate the efficacy of 'Tailored...... Physical Activity' for health care workers in the Sonderborg Municipality....

  2. Tailored expectant management: a nationwide survey to quantify patients and professionals barriers and facilitators

    NARCIS (Netherlands)

    van den Boogaard, N. M.; Musters, A. M.; Brühl, S. W.; Tankens, T.; Kremer, J. A. M.; Mol, B. W. J.; Hompes, P. G. A.; Nelen, W. L. D. M.; van der Veen, F.

    2012-01-01

    Prognostic models for natural conception help to identify subfertile couples with high chances of natural conception, who do not need fertility treatment yet. The use of such models and subsequent tailored expectant management (TEM) is not always practiced. Previous qualitative research has

  3. Tailored expectant management: a nationwide survey to quantify patients' and professionals' barriers and facilitators.

    NARCIS (Netherlands)

    Boogaard, N.M. van den; Musters, A.M.; Bruhl, S.W.; Tankens, T.; Kremer, J.A.M.; Mol, B.W.; Hompes, P.G.; Nelen, W.L.D.M.; Veen, F. van der

    2012-01-01

    BACKGROUND: Prognostic models for natural conception help to identify subfertile couples with high chances of natural conception, who do not need fertility treatment yet. The use of such models and subsequent tailored expectant management (TEM) is not always practiced. Previous qualitative research

  4. Effects of tailoring ingredients in auditory persuasive health messages on fruit and vegetable intake.

    Science.gov (United States)

    Elbert, Sarah P; Dijkstra, Arie; Rozema, Andrea D

    2017-07-01

    Health messages can be tailored by applying different tailoring ingredients, among which personalisation, feedback and adaptation. This experiment investigated the separate effects of these tailoring ingredients on behaviour in auditory health persuasion. Furthermore, the moderating effect of self-efficacy was assessed. The between-participants design consisted of four conditions. A generic health message served as a control condition; personalisation was applied using the recipient's first name, feedback was given on the personal state, or the message was adapted to the recipient's value. The study consisted of a pre-test questionnaire (measuring fruit and vegetable intake and perceived difficulty of performing these behaviours, indicating self-efficacy), exposure to the auditory message and a follow-up questionnaire measuring fruit and vegetable intake two weeks after message exposure (n = 112). ANCOVAs showed no main effect of condition on either fruit or vegetable intake, but a moderation was found on vegetable intake: When self-efficacy was low, vegetable intake was higher after listening to the personalisation message. No significant differences between the conditions were found when self-efficacy was high. Individuals with low self-efficacy seemed to benefit from incorporating personalisation, but only regarding vegetable consumption. This finding warrants further investigation in tailoring research.

  5. Applying mealtime functionality to tailor protein-enriched meals to older consumer segments

    NARCIS (Netherlands)

    Uijl, den Louise C.; Jager, Gerry; Zandstra, Elizabeth H.; Graaf, de Kees; Kremer, Stefanie

    2017-01-01

    The older adults group is highly heterogeneous, and its members do not always meet their recommended protein intake. We explored mealtime functionality as a basis for tailoring protein-enriched (PE) meal concepts to two senior consumer segments: 1) cosy socialisers, who eat mainly for cosiness

  6. Method æ, the agile software development method tailored for the pharmaceutical industry.

    NARCIS (Netherlands)

    Hajou, A.; Batenburg, R.S.; Jansen, S.

    2015-01-01

    Agile software development methods have a high adoption rate due to their proven business benefits. Its success has not yet been identified in the pharmaceutical industry, due to the industry’s incompatibility with generic agile methods. Comprehensive research has been done to engineer a tailored

  7. Development of a tailored work-related support intervention for gastrointestinal cancer patients

    NARCIS (Netherlands)

    Zaman, Anne-Claire G. N. M.; Tytgat, Kristien M. A. J.; Van Hezel, Sanne; Klinkenbijl, Jean H. G.; de Boer, Angela G. E. M.; Frings-Dresen, Monique H. W.

    2017-01-01

    Aim is the development of a work-related support intervention, tailored to the severity of work-related problems of patients diagnosed with gastrointestinal (GI) cancer treated with curative intent. Two methods were used: (1) Work-related problems were identified from the literature and submitted to

  8. Anthraquinone with Tailored Structure for Nonaqueous Metal-Organic Redox Flow Battery

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei; Xu, Wu; Cosimbescu, Lelia; Choi, Daiwon; Li, Liyu; Yang, Zhenguo

    2012-06-08

    A nonaqueous, hybrid metal-organic redox flow battery based on tailored anthraquinone structure is demonstrated to have an energy efficiency of {approx}82% and a specific discharge energy density similar to aqueous redox flow batteries, which is due to the significantly improved solubility of anthraquinone in supporting electrolytes.

  9. Energetic materials and methods of tailoring electrostatic discharge sensitivity of energetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, Michael A.; Heaps, Ronald J.; Wallace, Ronald S.; Pantoya, Michelle L.; Collins, Eric S.

    2016-11-01

    An energetic material comprising an elemental fuel, an oxidizer or other element, and a carbon nanofiller or carbon fiber rods, where the carbon nanofiller or carbon fiber rods are substantially homogeneously dispersed in the energetic material. Methods of tailoring the electrostatic discharge sensitivity of an energetic material are also disclosed.

  10. What's in a Surname? Physique, Aptitude, and Sports Type Comparisons between Tailors and Smiths.

    Directory of Open Access Journals (Sweden)

    Martin Voracek

    Full Text Available Combined heredity of surnames and physique, coupled with past marriage patterns and trade-specific physical aptitude and selection factors, may have led to differential assortment of bodily characteristics among present-day men with specific trade-reflecting surnames (Tailor vs. Smith. Two studies reported here were partially consistent with this genetic-social hypothesis, first proposed by Bäumler (1980. Study 1 (N = 224 indicated significantly higher self-rated physical aptitude for prototypically strength-related activities (professions, sports, hobbies in a random sample of Smiths. The counterpart effect (higher aptitude for dexterity-related activities among Tailors was directionally correct, but not significant, and Tailor-Smith differences in basic physique variables were nil. Study 2 examined two large total-population-of-interest datasets (Austria/Germany combined, and UK: N = 7001 and 20,532 of men's national high-score lists for track-and-field events requiring different physiques. In both datasets, proportions of Smiths significantly increased from light-stature over medium-stature to heavy-stature sports categories. The predicted counterpart effect (decreasing prevalences of Tailors along these categories was not supported. Related prior findings, the viability of possible alternative interpretations of the evidence (differential positive selection for trades and occupations, differential endogamy and assortative mating patterns, implicit egotism effects, and directions for further inquiry are discussed in conclusion.

  11. Anthraquinone with tailored structure for a nonaqueous metal-organic redox flow battery.

    Science.gov (United States)

    Wang, Wei; Xu, Wu; Cosimbescu, Lelia; Choi, Daiwon; Li, Liyu; Yang, Zhenguo

    2012-07-07

    A nonaqueous, hybrid metal-organic redox flow battery based on tailored anthraquinone structure is demonstrated to have an energy efficiency of ~82% and a specific discharge energy density similar to those of aqueous redox flow batteries, which is due to the significantly improved solubility of anthraquinone in supporting electrolytes.

  12. Data Quality in the Application of Tailored Calendar Methods in Hard-to-Reach Populations

    NARCIS (Netherlands)

    Navarra, M.Q.; Vaart, van der W.; Niehof, Anke

    2012-01-01

    Abstract A tailored calendar method was used to collect retrospective data from hard-to-reach populations: people with very low levels of income, education and literacy that live in complex societal situations and have low trust in authorities. Recognizing the serious threats to data quality in

  13. Stakeholders inverted question mark contributions to tailored implementation programs: an observational study of group interview methods

    NARCIS (Netherlands)

    Huntink, E.; Lieshout, J. van; Aakhus, E.; Baker, R.; Flottorp, S.; Godycki-Cwirko, M.; Jager, C.; Kowalczyk, A.; Szecsenyi, J.; Wensing, M.

    2014-01-01

    BackgroundTailored strategies to implement evidence-based practice can be generated in several ways. In this study, we explored the usefulness of group interviews for generating these strategies, focused on improving healthcare for patients with chronic diseases.MethodsParticipants included at least

  14. An ecological momentary intervention for smoking cessation: The associations of just-in-time, tailored messages with lapse risk factors.

    Science.gov (United States)

    Hébert, Emily T; Stevens, Elise M; Frank, Summer G; Kendzor, Darla E; Wetter, David W; Zvolensky, Michael J; Buckner, Julia D; Businelle, Michael S

    2018-03-01

    Smartphone apps can provide real-time, tailored interventions for smoking cessation. The current study examines the effectiveness of a smartphone-based smoking cessation application that assessed risk for imminent smoking lapse multiple times per day and provided messages tailored to current smoking lapse risk and specific lapse triggers. Participants (N=59) recruited from a safety-net hospital smoking cessation clinic completed phone-based ecological momentary assessments (EMAs) 5 times/day for 3 consecutive weeks (1week pre-quit, 2weeks post-quit). Risk for smoking lapse was estimated in real-time using a novel weighted lapse risk estimator. With each EMA, participants received messages tailored to current level of risk for imminent smoking lapse and self-reported presence of smoking urge, stress, cigarette availability, and motivation to quit. Generalized linear mixed model analyses determined whether messages tailored to specific lapse risk factors were associated with greater reductions in these triggers than messages not tailored to specific triggers. Overall, messages tailored to smoking urge, cigarette availability, or stress corresponded with greater reductions in those triggers than messages that were not tailored to specific triggers (p's=0.02 to <0.001). Although messages tailored to stress were associated with greater reductions in stress than messages not tailored to stress, the association was non-significant (p=0.892) when only moments of high stress were included in the analysis. Mobile technology can be used to conduct real-time smoking lapse risk assessment and provide tailored treatment content. Findings provide initial evidence that tailored content may impact users' urge to smoke, stress, and cigarette availability. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Feasibility and Acceptability of a Colocated Homeless-Tailored Primary Care Clinic and Emergency Department.

    Science.gov (United States)

    Gabrielian, Sonya; Chen, Jennifer C; Minhaj, Beena P; Manchanda, Rishi; Altman, Lisa; Koosis, Ella; Gelberg, Lillian

    2017-10-01

    Homeless adults have low primary care engagement and high emergency department (ED) utilization. Homeless-tailored, patient-centered medical homes (PCMH) decrease this population's acute care use. We studied the feasibility (focused on patient recruitment) and acceptability (conceptualized as clinicians' attitudes/beliefs) of a pilot initiative to colocate a homeless-tailored PCMH with an ED. After ED triage, low-acuity patients appropriate for outpatient care were screened for homelessness; homeless patients chose between a colocated PCMH or ED visit. To study feasibility, we captured (from May to September 2012) the number of patients screened for homelessness, positive screens, unique patients seen, and primary care visits. We focused on acceptability to ED clinicians (physicians, nurses, social workers); we sent a 32-item survey to ED clinicians (n = 57) who worked during clinic hours. Questions derived from an instrument measuring clinician attitudes toward homeless persons; acceptability of homelessness screening and the clinic itself were also explored. Over the 5 months of interest, 281 patients were screened; 172 (61.2%) screened positive for homelessness; 112 (65.1%) of these positive screens were seen over 215 visits. Acceptability data were obtained from 56% (n = 32) of surveyed clinicians. Attitudes toward homeless patients were similar to prior studies of primary care physicians. Most (54.6%) clinicians agreed with the homelessness screening procedures. Nearly all (90.3%) clinicians supported expansion of the homeless-tailored clinic; a minority (42.0%) agreed that ED colocation worked well. Our data suggest the feasibility of recruiting patients to a homeless-tailored primary care clinic colocated with the ED; however, the clinic's acceptability was mixed. Future quality improvement work should focus on tailoring the clinic to increase its acceptability among ED clinicians, while assessing its impact on health, housing, and costs.

  16. SraTailor: graphical user interface software for processing and visualizing ChIP-seq data.

    Science.gov (United States)

    Oki, Shinya; Maehara, Kazumitsu; Ohkawa, Yasuyuki; Meno, Chikara

    2014-12-01

    Raw data from ChIP-seq (chromatin immunoprecipitation combined with massively parallel DNA sequencing) experiments are deposited in public databases as SRAs (Sequence Read Archives) that are publically available to all researchers. However, to graphically visualize ChIP-seq data of interest, the corresponding SRAs must be downloaded and converted into BigWig format, a process that involves complicated command-line processing. This task requires users to possess skill with script languages and sequence data processing, a requirement that prevents a wide range of biologists from exploiting SRAs. To address these challenges, we developed SraTailor, a GUI (Graphical User Interface) software package that automatically converts an SRA into a BigWig-formatted file. Simplicity of use is one of the most notable features of SraTailor: entering an accession number of an SRA and clicking the mouse are the only steps required to obtain BigWig-formatted files and to graphically visualize the extents of reads at given loci. SraTailor is also able to make peak calls, generate files of other formats, process users' own data, and accept various command-line-like options. Therefore, this software makes ChIP-seq data fully exploitable by a wide range of biologists. SraTailor is freely available at http://www.devbio.med.kyushu-u.ac.jp/sra_tailor/, and runs on both Mac and Windows machines. © 2014 The Authors Genes to Cells © 2014 by the Molecular Biology Society of Japan and Wiley Publishing Asia Pty Ltd.

  17. A systematic review of randomized trials on the effectiveness of computer-tailored education on physical activity and dietary behaviors

    NARCIS (Netherlands)

    Kroeze, W.; Werkman, A.M.; Brug, J.

    2006-01-01

    Although computer-tailored promotion of dietary change and physical activity has been identified as a promising intervention strategy, there is a need for a more systematic evaluation of the evidence. Purpose: This study systematically reviews the scientific literature on computer-tailored physical

  18. Tailoring the Mode of Information Presentation : Effects on Younger and Older Adults' Attention and Recall of Online Information

    NARCIS (Netherlands)

    Nguyen, Minh Hao; van Weert, Julia C M; Bol, Nadine; Loos, Eugène F.; Tytgat, Kristien M A J; van de Ven, Anthony W H; Smets, Ellen M A

    2017-01-01

    Previous studies have mainly focused on tailoring message content to match individual characteristics and preferences. This study investigates the effect of a website tailored to individual preferences for the mode of information presentation, compared to 4 nontailored websites on younger and older

  19. Tailor-made finance versus tailor-made care. Can the state strengthen consumer choice in healthcare by reforming the financial structure of long-term care?

    Science.gov (United States)

    Grit, K; de Bont, A

    2010-02-01

    Policy instruments based on the working of markets have been introduced to empower consumers of healthcare. However, it is still not easy to become a critical consumer of healthcare. The aim of this study is to analyse the possibilities of the state to strengthen the position of patients with the aid of a new financial regime, such as personal health budgets. Data were collected through in-depth interviews with executives, managers, professionals and client representatives of six long-term care institutions. With the introduction of individual budgets the responsibility for budgetary control has shifted from the organisational level to the individual level in the caregiver-client relationship. Having more luxurious care on offer necessitates a stronger demarcation of regular care because organisations cannot simultaneously offer extra care as part of the standard care package. New financial instruments have an impact on the culture of receiving and giving care. Distributive justice takes on new meaning with the introduction of financial market mechanisms in healthcare; the distributing principle of 'need' is transformed into the principle of 'economic demand'. Financial instruments not only act as a countervailing power against providers insufficiently client-oriented, but are also used by providers to reinforce their own positions vis-à-vis demanding clients. Tailor-made finance is not the same as tailor-made care.

  20. Kinetically controlled synthesis of large-scale morphology-tailored silver nanostructures at low temperature

    Science.gov (United States)

    Zhang, Ling; Zhao, Yuda; Lin, Ziyuan; Gu, Fangyuan; Lau, Shu Ping; Li, Li; Chai, Yang

    2015-08-01

    Ag nanostructures are widely used in catalysis, energy conversion and chemical sensing. Morphology-tailored synthesis of Ag nanostructures is critical to tune physical and chemical properties. In this study, we develop a method for synthesizing the morphology-tailored Ag nanostructures in aqueous solution at a low temperature (45 °C). With the use of AgCl nanoparticles as the precursor, the growth kinetics of Ag nanostructures can be tuned with the pH value of solution and the concentration of Pd cubes which catalyze the reaction. Ascorbic acid and cetylpyridinium chloride are used as the mild reducing agent and capping agent in aqueous solution, respectively. High-yield Ag nanocubes, nanowires, right triangular bipyramids/cubes with twinned boundaries, and decahedra are successfully produced. Our method opens up a new environmentally-friendly and economical route to synthesize large-scale and morphology-tailored Ag nanostructures, which is significant to the controllable fabrication of Ag nanostructures and fundamental understanding of the growth kinetics.Ag nanostructures are widely used in catalysis, energy conversion and chemical sensing. Morphology-tailored synthesis of Ag nanostructures is critical to tune physical and chemical properties. In this study, we develop a method for synthesizing the morphology-tailored Ag nanostructures in aqueous solution at a low temperature (45 °C). With the use of AgCl nanoparticles as the precursor, the growth kinetics of Ag nanostructures can be tuned with the pH value of solution and the concentration of Pd cubes which catalyze the reaction. Ascorbic acid and cetylpyridinium chloride are used as the mild reducing agent and capping agent in aqueous solution, respectively. High-yield Ag nanocubes, nanowires, right triangular bipyramids/cubes with twinned boundaries, and decahedra are successfully produced. Our method opens up a new environmentally-friendly and economical route to synthesize large-scale and morphology-tailored

  1. A counselor in your pocket: feasibility of mobile health tailored messages to support HIV medication adherence

    Directory of Open Access Journals (Sweden)

    Cook PF

    2015-09-01

    Full Text Available Paul F Cook,1 Jane M Carrington,2 Sarah J Schmiege,1 Whitney Starr,3 Blaine Reeder11University of Colorado College of Nursing, Aurora, CO, USA; 2University of Arizona College of Nursing, Tucson, AZ, USA; 3University of Colorado School of Medicine, Aurora, CO, USAPurpose: Medication adherence is a major challenge in HIV treatment. New mobile technologies such as smartphones facilitate the delivery of brief tailored messages to promote adherence. However, the best approach for tailoring messages is unknown. Persons living with HIV (PLWH might be more receptive to some messages than others based on their current psychological state.Methods: We recruited 37 PLWH from a parent study of motivational states and adherence. Participants completed smartphone-based surveys at a random time every day for 2 weeks, then immediately received intervention or control tailored messages, depending on random assignment. After 2 weeks in the initial condition, participants received the other condition in a crossover design. Intervention messages were tailored to match PLWH’s current psychological state based on five variables – control beliefs, mood, stress, coping, and social support. Control messages were tailored to create a mismatch between message framing and participants’ current psychological state. We evaluated intervention feasibility based on acceptance, ease of use, and usefulness measures. We also used pilot randomized controlled trial methods to test the intervention’s effect on adherence, which was measured using electronic caps that recorded pill-bottle openings.Results: Acceptance was high based on 76% enrollment and 85% satisfaction. Participants found the hardware and software easy to use. However, attrition was high at 59%, and usefulness ratings were slightly lower. The most common complaint was boredom. Unexpectedly, there was no difference between mismatched and matched messages’ effects, but each group showed a 10%–15% improvement

  2. Tailored scenarios for streamflow climate change impacts based on the perturbation of precipitation and evapotranspiration

    Science.gov (United States)

    Ntegeka, Victor; Willems, Patrick; Baguis, Pierre; Roulin, Emmanuel

    2015-04-01

    It is advisable to account for a wide range of uncertainty by including the maximum possible number of climate models and scenarios for future impacts. As this is not always feasible, impact assessments are inevitably performed with a limited set of scenarios. The development of tailored scenarios is a challenge that needs more attention as the number of available climate change simulations grows. Whether these scenarios are representative enough for climate change impacts is a question that needs addressing. This study presents a methodology of constructing tailored scenarios for assessing runoff flows including extreme conditions (peak flows) from an ensemble of future climate change signals of precipitation and potential evapotranspiration (ETo) derived from the climate model simulations. The aim of the tailoring process is to formulate scenarios that can optimally represent the uncertainty spectrum of climate scenarios. These tailored scenarios have the advantage of being few in number as well as having a clear description of the seasonal variation of the climate signals, hence allowing easy interpretation of the implications of future changes. The tailoring process requires an analysis of the hydrological impacts from the likely future change signals from all available climate model simulations in a simplified (computationally less expensive) impact model. Historical precipitation and ETo time series are perturbed with the climate change signals based on a quantile perturbation technique that accounts for the changes in extremes. For precipitation, the change in wetday frequency is taken into account using a markov-chain approach. Resulting hydrological impacts from the perturbed time series are then subdivided into high, mean and low hydrological impacts using a quantile change analysis. From this classification, the corresponding precipitation and ETo change factors are back-tracked on a seasonal basis to determine precipitation-ETo covariation. The

  3. Preparation of tailored carbons with meso- and micro- porosity via template synthesis route

    Directory of Open Access Journals (Sweden)

    Howard. M. Williams

    2009-02-01

    Full Text Available A low cost templating approach to making non-ordered carbons with a tailored meso/micropore structure is described. A series of mesoporous carbons was prepared from polyfurfuryl alcohol and phenolic resin precursors by a templating route, using a variety of commercially available silica gels as the template material. Carbons were produced with mesopore volumes up to 1 cm3 g-1, mesopore sizes in the range of 4 nm to 8 nm and surface areas in the range of 300 to 700 m2 g-1. These mesoporous carbons were subsequently activated in CO2 to add controlled amounts of microporosity to produce carbons with both a micro and mesoporous structure. Significantly, the activation process did not appreciably change the mesopore size distribution of the carbons. By altering the activation time, it was possible to tailor the micropore: mesopore volume ratios within wide limits.

  4. Tailoring Selective Laser Melting Process Parameters for NiTi Implants

    Science.gov (United States)

    Bormann, Therese; Schumacher, Ralf; Müller, Bert; Mertmann, Matthias; de Wild, Michael

    2012-12-01

    Complex-shaped NiTi constructions become more and more essential for biomedical applications especially for dental or cranio-maxillofacial implants. The additive manufacturing method of selective laser melting allows realizing complex-shaped elements with predefined porosity and three-dimensional micro-architecture directly out of the design data. We demonstrate that the intentional modification of the applied energy during the SLM-process allows tailoring the transformation temperatures of NiTi entities within the entire construction. Differential scanning calorimetry, x-ray diffraction, and metallographic analysis were employed for the thermal and structural characterizations. In particular, the phase transformation temperatures, the related crystallographic phases, and the formed microstructures of SLM constructions were determined for a series of SLM-processing parameters. The SLM-NiTi exhibits pseudoelastic behavior. In this manner, the properties of NiTi implants can be tailored to build smart implants with pre-defined micro-architecture and advanced performance.

  5. Compact high-flux two-stage solar collectors based on tailored edge-ray concentrators

    Science.gov (United States)

    Friedman, Robert P.; Gordon, Jeffrey M.; Ries, Harald

    1995-08-01

    Using the recently-invented tailored edge-ray concentrator (TERC) approach for the design of compact two-stage high-flux solar collectors--a focusing primary reflector and a nonimaging TERC secondary reflector--we present: 1) a new primary reflector shape based on the TERC approach and a secondary TERC tailored to its particular flux map, such that more compact concentrators emerge at flux concentration levels in excess of 90% of the thermodynamic limit; and 2) calculations and raytrace simulations result which demonstrate the V-cone approximations to a wide variety of TERCs attain the concentration of the TERC to within a few percent, and hence represent practical secondary concentrators that may be superior to corresponding compound parabolic concentrator or trumpet secondaries.

  6. Weight management in obese pets: the tailoring concept and how it can improve results.

    Science.gov (United States)

    German, Alexander J

    2016-10-20

    Obesity is now recognised as the most important medical disease in pets worldwide. All current strategies for weight management involve dietary energy restriction with a purpose-formulated diet. Whilst current weight management regimes can be successful, outcomes are often disappointing with the rate of weight loss progressively slowing down as time goes on. Success is most challenging for the most obese dogs and cats that are more likely to discontinue the programme before reaching target weight. To improve outcomes, clinicians must focus carefully on better tailoring programmes, paying particular to setting an appropriate target weight so as to maximise the benefits for the individual. In this opinionated review, the author will discuss findings from recent clinical research studies examining weight management in obese dogs and cats. A strategy for tailoring weight management targets will then be discussed, illustrated with case examples.

  7. Tailoring of motional states in double-well potentials by time-dependent processes

    International Nuclear Information System (INIS)

    Haerkoenen, Kari; Kaerki, Ollijuhani; Suominen, Kalle-Antti

    2006-01-01

    We show that the vibrational state tailoring method developed for molecular systems can be applied for cold atoms in optical lattices. The original method is based on a three-level model interacting with two strong laser pulses in a counterintuitive sequence [M. Rodriguez et al., Phys. Rev. A 62, 053413 (2000)]. Here we outline the conditions for achieving similar dynamics with single time-dependent potential surfaces. It is shown that guided switching between diabatic and adiabatic evolution has an essential role in this system. We also show that efficient and precise tailoring of motional states in optical lattices can be achieved, for instance, simply by superimposing two lattices and moving them with respect to each other

  8. Optimizing Online Suicide Prevention: A Search Engine-Based Tailored Approach.

    Science.gov (United States)

    Arendt, Florian; Scherr, Sebastian

    2017-11-01

    Search engines are increasingly used to seek suicide-related information online, which can serve both harmful and helpful purposes. Google acknowledges this fact and presents a suicide-prevention result for particular search terms. Unfortunately, the result is only presented to a limited number of visitors. Hence, Google is missing the opportunity to provide help to vulnerable people. We propose a two-step approach to a tailored optimization: First, research will identify the risk factors. Second, search engines will reweight algorithms according to the risk factors. In this study, we show that the query share of the search term "poisoning" on Google shows substantial peaks corresponding to peaks in actual suicidal behavior. Accordingly, thresholds for showing the suicide-prevention result should be set to the lowest levels during the spring, on Sundays and Mondays, on New Year's Day, and on Saturdays following Thanksgiving. Search engines can help to save lives globally by utilizing a more tailored approach to suicide prevention.

  9. Photoswitchable molecular dipole antennas with tailored coherent coupling in glassy composite

    DEFF Research Database (Denmark)

    Elbahri, Mady; Zillohu, Ahnaf Usman; Gothe, Bastian

    2015-01-01

    . We also introduce the concept of 'tailored molecular photonic coupling' while highlighting the role of interferences for the design of optically active media by adjusting the photonic response of the medium with the real and imaginary refractive index of photoswitchable molecules in the 'ON' state...... alteration of photochromic molecular dipole antennas. We successfully demonstrate the concept of Brewster wavelength, which is based on the dipolar interaction between radiating dipoles and the surrounding matrix possessing a net dipole moment, as a key tool for highly localized sensing of matrix polarity....... Our results enhance our fundamental understanding of coherent dipole radiation and open a new vein of research based on glassy disordered dipolar composites that act as macroscopic antenna with cooperative action; furthermore, these results have important implications for new design rules of tailored...

  10. Tailored Algorithm for Sensitivity Enhancement of Gas Concentration Sensors Based on Tunable Laser Absorption Spectroscopy.

    Science.gov (United States)

    Vargas-Rodriguez, Everardo; Guzman-Chavez, Ana Dinora; Baeza-Serrato, Roberto

    2018-06-04

    In this work, a novel tailored algorithm to enhance the overall sensitivity of gas concentration sensors based on the Direct Absorption Tunable Laser Absorption Spectroscopy (DA-ATLAS) method is presented. By using this algorithm, the sensor sensitivity can be custom-designed to be quasi constant over a much larger dynamic range compared with that obtained by typical methods based on a single statistics feature of the sensor signal output (peak amplitude, area under the curve, mean or RMS). Additionally, it is shown that with our algorithm, an optimal function can be tailored to get a quasi linear relationship between the concentration and some specific statistics features over a wider dynamic range. In order to test the viability of our algorithm, a basic C 2 H 2 sensor based on DA-ATLAS was implemented, and its experimental measurements support the simulated results provided by our algorithm.

  11. Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants.

    Science.gov (United States)

    Zhang, Z; Jones, D; Yue, S; Lee, P D; Jones, J R; Sutcliffe, C J; Jones, E

    2013-10-01

    Porous titanium implants are a common choice for bone augmentation. Implants for spinal fusion and repair of non-union fractures must encourage blood flow after implantation so that there is sufficient cell migration, nutrient and growth factor transport to stimulate bone ingrowth. Additive manufacturing techniques allow a large number of pore network designs. This study investigates how the design factors offered by selective laser melting technique can be used to alter the implant architecture on multiple length scales to control and even tailor the flow. Permeability is a convenient parameter that characterises flow, correlating to structure openness (interconnectivity and pore window size), tortuosity and hence flow shear rates. Using experimentally validated computational simulations, we demonstrate how additive manufacturing can be used to tailor implant properties by controlling surface roughness at a microstructual level (microns), and by altering the strut ordering and density at a mesoscopic level (millimetre). Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

  12. Tailored silver grid as transparent electrodes directly written by femtosecond laser

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yuan-Yuan; Ren, Xue-Liang [Laboratory of Organic NanoPhotonics and Laboratory of Bio-Inspired Smart Interface Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No. 29, Zhongguancun East Road, Beijing 100190 (China); University of Chinese Academy of Sciences, No. 29, Zhongguancun East Road, Beijing 100190 (China); Zheng, Mei-Ling, E-mail: zhengmeiling@mail.ipc.ac.cn, E-mail: xmduan@mail.ipc.ac.cn; Dong, Xian-Zi; Jin, Feng; Liu, Jie; Zhao, Zhen-Sheng [Laboratory of Organic NanoPhotonics and Laboratory of Bio-Inspired Smart Interface Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No. 29, Zhongguancun East Road, Beijing 100190 (China); Duan, Xuan-Ming, E-mail: zhengmeiling@mail.ipc.ac.cn, E-mail: xmduan@mail.ipc.ac.cn [Laboratory of Organic NanoPhotonics and Laboratory of Bio-Inspired Smart Interface Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, No. 29, Zhongguancun East Road, Beijing 100190 (China); Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, No. 266 Fangzheng Ave., Shuitu Technology Development Zone, Beibei District, Chongqing 400714 (China)

    2016-05-30

    We present the design and realization of silver grid transparent electrodes (SGTEs) easily fabricated by femtosecond laser direct writing of silver aqueous solution. The fabricated SGTEs with a sheet resistance down to 47 Ω/□ and optical transmittance up to 93% are demonstrated. These sheet resistance and transmittance values are comparable to commercially available indium tin oxide. High uniform morphology of the directly written SGTEs results in the ultra-stable tailored performance parameter at electronic and optical fields. The sheet resistance and transmittance can be tailored precisely by manipulating the filling fraction of the uniform SGTEs. This study provides an approach for creating SGTEs in a controllable fashion, and the SGTEs exhibit high transmittance and low sheet resistance, which could open up new avenues towards widespread application in electronics, photovoltaics, and optoelectronics.

  13. Effect of individually tailored biopsychosocial workplace interventions on chronic musculoskeletal pain and stress among laboratory technicians

    DEFF Research Database (Denmark)

    Andersen, Kenneth Jay; Brandt, Mikkel; Hansen, Klaus

    2015-01-01

    pain using individually tailored physical and cognitive elements. STUDY DESIGN: This trial uses a single-blind randomized controlled design with allocation concealment in a 2-armed parallel group format among laboratory technicians. The trial "Implementation of physical exercise at the Workplace (IRMA...... 2014 (follow-up). METHODS: Participants (n = 112) were allocated to receive either physical, cognitive, and mindfulness group-based training (PCMT group) or a reference group (REF) for 10 weeks at the worksite. PCMT consisted of 4 major elements: 1) resistance training individually tailored to the pain...... affected area, 2) motor control training, 3) mindfulness, and 4) cognitive and behavioral therapy/education. Participants of the REF group were encouraged to follow ongoing company health initiatives. The predefined primary outcome measure was pain intensity (VAS scale 0 - 10) in average of the regions...

  14. Tailored patient information using a database system: Increasing patient compliance in a day surgery setting

    DEFF Research Database (Denmark)

    Grode, Jesper Nicolai Riis; Grode, Louise; Steinsøe, Ulla

    rehabilitation. The hospital is responsible of providing the patients with accurate information enabling the patient to prepare for surgery. Often patients are overloaded with uncoordinated information, letters and leaflets. The contribution of this project is a database system enabling health professionals...... to empower patients through tailored individualized information. Performing 6500 operations per year at our Day Surgery Centre, health professionals need a computer based system to create individualized information material. Health professionals must be able to adapt the information material quickly...... was established to support these requirements. A relational database system holds all information pieces in a granular, structured form. Each individual piece of information can be joined with other pieces thus supporting the tailoring of information. A web service layer caters for integration with output systems...

  15. Tailoring polarization of electromagnetically induced transparency based on non-centrosymmetric metasurfaces

    Science.gov (United States)

    Li, Hai-ming; Xue, Feng

    2017-09-01

    In this manuscript, tailoring polarization of analogy of electromagnetically induced transparency (EIT-like) based on non-centrosymmetric metasurfaces has been numerically and experimentally demonstrated. The EIT-like metamaterial is composed of a rectangle ring and two cut wires. The rectangle ring and the cut wire are chosen as the bright mode and the quasi-dark mode, respectively. Under the incident electromagnetic wave excitation, a polarization insensitive EIT-like transmission window can be observed at specific polarization angles. Within the transmission window, the phase steeply changes, which leads to the large group index. Tailoring polarization of EIT-like metamaterial with large group index at specific polarization angles may have potential application in slow light devices.

  16. Tailored Surfaces/Assemblies for Molecular Plasmonics and Plasmonic Molecular Electronics.

    Science.gov (United States)

    Lacroix, Jean-Christophe; Martin, Pascal; Lacaze, Pierre-Camille

    2017-06-12

    Molecular plasmonics uses and explores molecule-plasmon interactions on metal nanostructures for spectroscopic, nanophotonic, and nanoelectronic devices. This review focuses on tailored surfaces/assemblies for molecular plasmonics and describes active molecular plasmonic devices in which functional molecules and polymers change their structural, electrical, and/or optical properties in response to external stimuli and that can dynamically tune the plasmonic properties. We also explore an emerging research field combining molecular plasmonics and molecular electronics.

  17. SAP R/3 An IT-plague or the answer to the Tailors dream?

    DEFF Research Database (Denmark)

    Koch, Christian

    1999-01-01

    The IT-market of ERP-systems have significantly changed over the last 10 years. At least in Denmark manufacturing enterprises used to close "partner like" collaboration with their IT-supplier, now face mass produced packaged software. This challenges the skills of technology managers, can they cope...... with the IT-plague, do they suffer from the "power of default",i.e. the use of standard settings of parameters?- or can they tailor anything to anybody?...

  18. INTERNATIONALIZATION OF THE TEXTILE AND TAILORING COMPANIES OF AREQUIPA AND THE IMPACT ON THEIR DEVELOPMENT

    OpenAIRE

    Heningns Otoya, Julio Alberto; Sánchez Sánchez, Rohel

    2014-01-01

    The investigation seeks to determine whether the internationalization processes followed in recent years by the textile and tailoring companies in the region of Arequipa in Peru, have impacted positively on their development, enabling improvements in competitive and economic sustainability. The results of the sample, permit to affirm a beneficial effect over the development of such organizations when they focus part of their performance in international markets, allowing that the adaptation t...

  19. Tailoring the physical properties of manganite thin films by tuning the epitaxial strain

    International Nuclear Information System (INIS)

    Zhang, P.X.; Zhang, H.; Cha, L.M.; Habermeier, H.-U.

    2003-01-01

    Through a proper choice of the mismatch between substrate and films, the physical properties of manganite thin films can be tailored We show that two types of manganite thin films of the Ruddlesden-Popper family, n=∞ and n=2, demonstrate a dramatic variation of their physical properties. It is proved that the property variation can be tuned precisely by controlling the lattice mismatch and/or the film thickness

  20. Are All Interventions Created Equal? A Multi-Threat Approach to Tailoring Stereotype Threat Interventions

    OpenAIRE

    Shapiro, Jenessa R.; Williams, Amy M.; Hambarchyan, Mariam

    2012-01-01

    To date, stereotype threat interventions have been considered interchangeable. Across 4 experiments, the present research demonstrates that stereotype threat interventions need to be tailored to the specific form of experienced stereotype threat to be effective. The Multi-Threat Framework (Shapiro & Neuberg, 2007) distinguishes between group-as-target stereotype threats—concerns that a stereotype-relevant performance will reflect poorly on the abilities of one’s group—and self-as-target stere...

  1. Development of a Tailored Methodology and Forensic Toolkit for Industrial Control Systems Incident Response

    Science.gov (United States)

    2014-06-01

    for industrial control systems ,” in Proceedings of the VDE Kongress, 2004. [15] K. Stouffer et al., “Special publication 800-82: Guide to industrial...TAILORED METHODOLOGY AND FORENSIC TOOLKIT FOR INDUSTRIAL CONTROL SYSTEMS INCIDENT RESPONSE by Nicholas B. Carr June 2014 Thesis Co...CONTROL SYSTEMS INCIDENT RESPONSE 5. FUNDING NUMBERS 6. AUTHOR(S) Nicholas B. Carr 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval

  2. Design and results of a culturally tailored cancer outreach project by and for Micronesian women.

    Science.gov (United States)

    Aitaoto, Nia; Braun, Kathryn L; Estrella, Julia; Epeluk, Aritae; Tsark, JoAnn

    2012-01-01

    In 2005, approximately 26% of Micronesian women aged 40 or older in Hawai'i used mammography for breast cancer screening. We describe an 18-month project to increase screening participation in this population by tailoring educational materials and using a lay educator approach. New immigrants to Hawai'i are Marshallese from the Republic of the Marshall Islands and Chuukese, Pohnpeians, and Kosraeans from the Federated States of Micronesia. In Hawai'i, these 4 groups refer to themselves collectively as Micronesians, although each group has its own distinct culture and language. From 2006 through 2007, we applied principles of community-based participatory research--trust building, joint assessment, cultural tailoring of materials, and skills transfer--to develop and track the reach of Micronesian women lay educators in implementing a cancer awareness program among Micronesian women living in Hawai'i. Using our tailored in-language materials, 11 lay educators (5 Chuukese, 3 Marshallese, 2 Pohnpeians, and 1 Kosraean) provided one-on-one and small group in-language cancer information sessions to 567 Micronesian women (aged 18-75 years). Among the 202 women aged 40 or older eligible for mammography screening, 166 (82%) had never had a mammogram and were assisted to screening appointments. After 6 months, 146 (88%) of the 166 had received a mammogram, increasing compliance from 18% to 90%. Lay educators reported increases in their skills and their self-esteem and want to extend their skills to other health issues, including diabetes management and immunization. Tailoring materials and using the lay educator model successfully increased participation in breast cancer screening. This model may work in other communities that aim to reduce disparities in access to cancer screening.

  3. Sex differences in gout characteristics: tailoring care for women and men.

    Science.gov (United States)

    Harrold, Leslie R; Etzel, Carol J; Gibofsky, Allan; Kremer, Joel M; Pillinger, Michael H; Saag, Kenneth G; Schlesinger, Naomi; Terkeltaub, Robert; Cox, Vanessa; Greenberg, Jeffrey D

    2017-03-14

    To characterize the differences between women and men with gout. We analyzed a US national cohort of gout patients cared for by rheumatologists. Compared with the 1012 men with gout, women with gout (n = 262) were older (71 vs. 61 years, p gout differed with women more often taking diuretics (p gout are markedly different, suggesting a need to tailor treatment recommendations.

  4. Tailoring the Acquisition Process in the U.S. Department of Defense

    Science.gov (United States)

    2015-01-01

    the associate directors, Paul DeLuca and Marc Robbins , for their insightful com- ments on this research. xvii Abbreviations ADM Acquisition Decision...by the SASSA program. Of these six, one was judged as a neutral contribution while five were judged as helpful in achiev- ing the program goals. No...tailored processes were judged as nega- tive contributions to meeting the rapid space acquisitions goals. (Johnson, 2010, p. 4) Also in regard to SE

  5. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang, E-mail: gfzhang@snnu.edu.cn; Gao, Ziwei, E-mail: zwgao@snnu.edu.cn

    2015-01-15

    A successive anchoring of Ti(NMe{sub 2}){sub 4}, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, {sup 13}C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands. - Graphical abstract: The ligand-tailored silica supported “single site” titanium complexes were synthesized by SOMC strategy and fully characterized. Their catalytic activity were evaluated by benzaldehyde silylcyanation. - Highlights: • Single-site silica supported Ti active species was prepared by SOMC technique. • O-donor ligand tailored Ti surface species was synthesized. • The surface species was characterized by XPS, {sup 13}C CP-MAS NMR, XANES etc. • Catalytic activity of the Ti active species in silylcyanation reaction was evaluated.

  6. CSR Communication - An Employee Perspective : Tailoring Internal Communication using Employee Preferences for Content, Style and Channel.

    OpenAIRE

    Jonsson, Viktoria; Linnér, Rebecka

    2016-01-01

    Corporate Social Responsibility (CSR) represents a theory and practice that is well-known and communicating its content has shown to play an important role in order to exploit its advantages and engage stakeholders on CSR issues. Even though, CSR communication has shown to be a real challenge, since corporations are encouraged to engage in CSR, but not to communicate too loud about this engagement. This study was inspired by Jenny Dawkins (2005) and her initial idea that tailoring CSR message...

  7. Tailoring reablement: A grounded theory study of establishing reablement in a community setting in Norway.

    Science.gov (United States)

    Moe, Cathrine; Brinchmann, Berit Støre

    2018-01-01

    Reablement is an interprofessional, home-based rehabilitation service that aims to enable senior residents to cope with everyday life and to prevent functional impairments. Systematic accounts of what practitioners actually do when establishing reablement are lacking. This study aims to generate a grounded theory of practitioners' patterns of action when establishing reablement. The study is located in Norway, and grounded theory is the methodological approach. Data were collected from January 2014 to August 2016 through participant observations, focus group interviews and individual interviews. Informants are municipal healthcare employees in different organisational areas associated with the process of establishing reablement services (managers of conventional home care and representatives from the administration and service-provider offices). Altogether, 17 individuals are interviewed. The empirical data are analysed several times using open, selective and theoretical coding. The grounded theory, "tailoring reablement," includes three phases-replicating, adapting and establishing-and the strategies of collaborating, developing knowledge, habituating and filtering. The theory of tailoring reablement also includes the impact of the contextual factors. The study seeks to bridge the gap between research and practice. The theory of tailoring reablement emerges from an inductive approach and theorises participants' actions. The theory focuses on the phases from innovation to implementation. Establishing a new service model in a complex welfare setting requires a wide range of actors and agencies. Tailoring reablement also requires flexibility and professional autonomy. It is important to create terms and conditions for this within a stringent health and care service. The insights of this study have implications for practice development of reablement and can fit other public sector fields. © 2017 The Authors. Health and Social Care in the Community Published by John

  8. What?s in a Surname? Physique, Aptitude, and Sports Type Comparisons between Tailors and Smiths

    OpenAIRE

    Voracek, Martin; Rieder, Stephan; Stieger, Stefan; Swami, Viren

    2015-01-01

    Combined heredity of surnames and physique, coupled with past marriage patterns and trade-specific physical aptitude and selection factors, may have led to differential assortment of bodily characteristics among present-day men with specific trade-reflecting surnames (Tailor vs. Smith). Two studies reported here were partially consistent with this genetic-social hypothesis, first proposed by Bäumler (1980). Study 1 (N = 224) indicated significantly higher self-rated physical aptitude for prot...

  9. On-line Delivery for Serbo-Croatian (Bosniac, Croatian, Serbian: Tailoring Technology to the Learner

    Directory of Open Access Journals (Sweden)

    Danko Sipka

    2004-01-01

    Full Text Available Tbis paper discusses the project of full on-line delivery of an introductory Serbo-Croatian (Bosniac, Croatian, Serbian course at the Arizona State University Critical Languages Institute. The issue of tailoring technology to meet diversified needs of a wide range of learners (from heritage speakers of the three Serbo-Croatian speaking ethnic communities to professional non-heritage learners is in the center of the discussion.

  10. The effects of message quality and congruency on perceptions of tailored health communications ✩

    OpenAIRE

    Updegraff, John A.; Sherman, David K.; Luyster, Faith S.; Mann, Traci L.

    2007-01-01

    Recent research has documented the effectiveness of tailoring health behavior change messages to characteristics of the recipients, but little is known about the processes underlying these effects. Drawing from the elaboration likelihood model (Petty & Cacioppo, 1986), we examined the role of message scrutiny in moderating the congruency effect (Mann, Sherman, & Updegraff, 2004). One hundred and thirty-six undergraduate participants read either a strong or weak message promoting regular denta...

  11. Hand cumulative trauma disorders in Nigerian custom tailors: the need for redesign of manual scissors.

    Science.gov (United States)

    Adeleye, Adedoyin Abiodun; Akanbi, Olusegun Gabriel

    2015-01-01

    Cutting scissors are important working tools for Nigerian custom tailors (CTs) but its usage apparently does not meet the ergonomics need of these artisans. A survey was carried out amongst CTs using questionnaires to obtain their background social-occupational demographics and observation methods to study their work performance, use of scissors and any cumulative trauma disorder (CTD) in their hands. Thicknesses of various fabrics were measured and comparison between Western world's custom tailoring job and the Nigerian type was done. The results showed some CTD risk factors with finger contusions on the 71 CTs evaluated. The right-hand contusions were traced to the constant usage of unpadded manual scissors with ungloved hands. Disparity between Western and Nigerian tailoring practice may account for the high occurrence of disorders in Nigerian CTs. Since hand dimensions are crucial in the design of hand tools, it is therefore concluded that hand anthropometry of Nigerian CTs and soft padding of manual scissors may mitigate CTD burdens on CTs' hands. Cumulative trauma disorders on the hands of low-income Nigerian CTs needed investigation. This was done via self-assessment and observational methods of the artisans’ work system. Frequent usage of unpadded manual scissors with un-gloved hands cause and exacerbate the problem. Hand anthropometry of users is crucial in scissors manufacturing.

  12. Treatment planning using tailored and standard cylindrical light diffusers for photodynamic therapy of the prostate

    International Nuclear Information System (INIS)

    Rendon, Augusto; Lilge, Lothar; Beck, J Christopher

    2008-01-01

    Interstitial photodynamic therapy (PDT) has seen a rebirth, partially prompted by the development of photosensitizers with longer absorption wavelengths that enable the treatment of larger tissue volumes. Here, we study whether using diffusers with customizable longitudinal emission profiles, rather than conventional ones with flat emission profiles, improves our ability to conform the light dose to the prostate. We present a modified Cimmino linear feasibility algorithm to solve the treatment planning problem, which improves upon previous algorithms by (1) correctly minimizing the cost function that penalizes deviations from the prescribed light dose, and (2) regularizing the inverse problem. Based on this algorithm, treatment plans were obtained under a variety of light delivery scenarios using 5-15 standard or tailored diffusers. The sensitivity of the resulting light dose distributions to uncertainties in the optical properties, and the placement of diffusers was also studied. We find that tailored diffusers only marginally outperform conventional ones in terms of prostate coverage and rectal sparing. Furthermore, it is shown that small perturbations in optical properties can lead to large changes in the light dose distribution, but that those changes can be largely corrected with a simple light dose re-normalization. Finally, we find that prostate coverage is only minimally affected by small changes in diffuser placement. Our results suggest that prostate PDT is not likely to benefit from the use of tailored diffusers. Other locations with more complex geometries might see a better improvement

  13. Thoracoscopic surgery for pulmonary metastases after chemotherapy using a tailor-made virtual lung

    International Nuclear Information System (INIS)

    Akiba, Tadashi; Marushima, Hideki; Kinoshita, Satoki; Kamiya, Noriteru; Odaka, Makoto; Takeyama, Hiroshi; Morikawa, Toshiaki

    2011-01-01

    Details with regard to the standard criteria for a therapeutic metastasectomy and the use of video-assisted thoracic surgery (VATS) remain elusive. To evaluate the feasibility of VATS using a tailor-made virtual lung for patients with pulmonary metastases after chemotherapy, we reviewed the following cases. Clinical data from October 2006 to April 2010 were obtained from patients who received chemotherapy before a pulmonary metastasectomy (lobectomy or segmentectomy). VATS was the primarily selected surgical approach except for treating hilar lesions. A lobectomy was performed when the metastasis was greater than 3.0 cm in diameter or located deeply in the lobe. Tailor-made virtual lungs were created using three-dimensional multidetector computed tomography before lobectomy on a routine basis. The virtual lung consisted of three-dimensional pulmonary vessels, a tracheobronchial tree, pulmonary parenchyma, and tumors. Twelve operations, consisting of 1 segmentectomy, 10 lobectomies, and 1 wedge bronchoplasty upper lobectomy, were performed on 11 patients during the study period. VATS was completed in 10 of these 12 operations. The mean operative time for the lobectomies was 257 min, and the mean operative bleeding volume was 215 ml. Two cases experienced postoperative transient atrial fibrillation, and no mortalities associated with these operations were reported. VATS was performed safely in instances of metastasectomy after chemotherapy, and the tailor-made virtual lung assisted in lung orientation during the operation. (author)

  14. Tailored cognitive-behavioural therapy and exercise training improves the physical fitness of patients with fibromyalgia.

    Science.gov (United States)

    van Koulil, S; van Lankveld, W; Kraaimaat, F W; van Helmond, T; Vedder, A; van Hoorn, H; Donders, A R T; Wirken, L; Cats, H; van Riel, P L C M; Evers, A W M

    2011-12-01

    Patients with fibromyalgia have diminished levels of physical fitness, which may lead to functional disability and exacerbating complaints. Multidisciplinary treatment comprising cognitive-behavioural therapy (CBT) and exercise training has been shown to be effective in improving physical fitness. However, due to the high drop-out rates and large variability in patients' functioning, it was proposed that a tailored treatment approach might yield more promising treatment outcomes. High-risk fibromyalgia patients were randomly assigned to a waiting list control group (WLC) or a treatment condition (TC), with the treatment consisting of 16 twice-weekly sessions of CBT and exercise training tailored to the patient's cognitive-behavioural pattern. Physical fitness was assessed with two physical tests before and 3 months after treatment and at corresponding intervals in the WLC. Treatment effects were evaluated using linear mixed models. The level of physical fitness had improved significantly in the TC compared with the WLC. Attrition rates were low, effect sizes large and reliable change indices indicated a clinically relevant improvement among the TC. A tailored multidisciplinary treatment approach for fibromyalgia consisting of CBT and exercise training is well tolerated, yields clinically relevant changes, and appears a promising approach to improve patients' physical fitness. ClinicalTrials.gov ID NCT00268606.

  15. Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants

    International Nuclear Information System (INIS)

    Zhang, Z.; Jones, D.; Yue, S.; Lee, P.D.; Jones, J.R.; Sutcliffe, C.J.; Jones, E.

    2013-01-01

    Porous titanium implants are a common choice for bone augmentation. Implants for spinal fusion and repair of non-union fractures must encourage blood flow after implantation so that there is sufficient cell migration, nutrient and growth factor transport to stimulate bone ingrowth. Additive manufacturing techniques allow a large number of pore network designs. This study investigates how the design factors offered by selective laser melting technique can be used to alter the implant architecture on multiple length scales to control and even tailor the flow. Permeability is a convenient parameter that characterises flow, correlating to structure openness (interconnectivity and pore window size), tortuosity and hence flow shear rates. Using experimentally validated computational simulations, we demonstrate how additive manufacturing can be used to tailor implant properties by controlling surface roughness at a microstructual level (microns), and by altering the strut ordering and density at a mesoscopic level (millimetre). Highlights: • Experimentally validated permeability prediction tools for hierarchical implants. • Randomised structures form preferential flow channels with stronger shear flows. • Hierarchical strut structures allow independent tailoring of flow and pore size

  16. Tailoring the chirality of light emission with spherical Si-based antennas.

    Science.gov (United States)

    Zambrana-Puyalto, Xavier; Bonod, Nicolas

    2016-05-21

    Chirality of light is of fundamental importance in several enabling technologies with growing applications in life sciences, chemistry and photodetection. Recently, some attention has been focused on chiral quantum emitters. Consequently, optical antennas which are able to tailor the chirality of light emission are needed. Spherical nanoresonators such as colloids are of particular interest to design optical antennas since they can be synthesized at a large scale and they exhibit good optical properties. Here, we show that these colloids can be used to tailor the chirality of a chiral emitter. To this purpose, we derive an analytic formalism to model the interaction between a chiral emitter and a spherical resonator. We then compare the performances of metallic and dielectric spherical antennas to tailor the chirality of light emission. It is seen that, due to their strong electric dipolar response, metallic spherical nanoparticles spoil the chirality of light emission by yielding achiral fields. In contrast, thanks to the combined excitation of electric and magnetic modes, dielectric Si-based particles feature the ability to inhibit or to boost the chirality of light emission. Finally, it is shown that dual modes in dielectric antennas preserve the chirality of light emission.

  17. Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z. [Department of Materials, Imperial College London, South Kensington Campus, London, SW7 2AZ (United Kingdom); Jones, D. [School of Engineering, University of Liverpool, Brownlow Hill, Liverpool, L69 3GH (United Kingdom); Yue, S. [Manchester X-ray Imaging Facility, School of Materials, The University of Manchester, Oxford Road, M13 9PL (United Kingdom); Lee, P.D., E-mail: peter.lee@manchester.ac.uk [Manchester X-ray Imaging Facility, School of Materials, The University of Manchester, Oxford Road, M13 9PL (United Kingdom); Jones, J.R. [Department of Materials, Imperial College London, South Kensington Campus, London, SW7 2AZ (United Kingdom); Sutcliffe, C.J. [School of Engineering, University of Liverpool, Brownlow Hill, Liverpool, L69 3GH (United Kingdom); Jones, E. [Department of Advanced Technology, Stryker Orthopaedics, Raheen Business Park, Limerick (Ireland)

    2013-10-15

    Porous titanium implants are a common choice for bone augmentation. Implants for spinal fusion and repair of non-union fractures must encourage blood flow after implantation so that there is sufficient cell migration, nutrient and growth factor transport to stimulate bone ingrowth. Additive manufacturing techniques allow a large number of pore network designs. This study investigates how the design factors offered by selective laser melting technique can be used to alter the implant architecture on multiple length scales to control and even tailor the flow. Permeability is a convenient parameter that characterises flow, correlating to structure openness (interconnectivity and pore window size), tortuosity and hence flow shear rates. Using experimentally validated computational simulations, we demonstrate how additive manufacturing can be used to tailor implant properties by controlling surface roughness at a microstructual level (microns), and by altering the strut ordering and density at a mesoscopic level (millimetre). Highlights: • Experimentally validated permeability prediction tools for hierarchical implants. • Randomised structures form preferential flow channels with stronger shear flows. • Hierarchical strut structures allow independent tailoring of flow and pore size.

  18. Effects of tailored message education about breast cancer risk appraisal for obese Korean women.

    Science.gov (United States)

    Park, Somi; Chung, ChaeWeon; Cochrane, Barbara B

    2013-11-01

    To examine the effects of tailored message education about breast cancer risk in obese Korean women. Pretest/post-test with two comparison treatments. Rural community settings in South Korea. Non-random sample of 64 obese women. Based on the Health Belief Model, tailored message education involved a one-session individual approach addressing cognitive, emotional, and behavioral domains. The comparison group received a one-time standard education group session. Data on breast cancer risk factors and mammography findings were recorded. Knowledge, awareness, emotional barriers, self-efficacy, and intent to screen and prevent breast cancer. Compared to standard education, tailored message education showed significantly higher score changes on awareness of personal risk (F = 5.21, p message education targeting breast cancer and risk associated with obesity is useful in breast cancer screening education. Future studies should incorporate individualized messages on nutrition, exercise, and cultural barriers to reduce breast cancer risk in obese women. Individual educational strategies can effectively enhance breast cancer prevention and early screening. Public and preventive education should include a focus on cultural, cognitive, and emotional domains. For obese women, a heightened awareness and self-efficacy may influence screening behaviors.

  19. Belief In Numbers: When and why women disbelieve tailored breast cancer risk statistics

    Science.gov (United States)

    Scherer, Laura D.; Ubel, Peter A.; McClure, Jennifer; Green, Sarah M.; Alford, Sharon Hensley; Holtzman, Lisa; Exe, Nicole; Fagerlin, Angela

    2013-01-01

    Objective To examine when and why women disbelieve tailored information about their risk of developing breast cancer. Methods 690 women participated in an online program to learn about medications that can reduce the risk of breast cancer. The program presented tailored information about each woman’s personal breast cancer risk. Half of women were told how their risk numbers were calculated, whereas the rest were not. Later, they were asked whether they believed that the program was personalized, and whether they believed their risk numbers. If a woman did not believe her risk numbers, she was asked to explain why. Results Beliefs that the program was personalized were enhanced by explaining the risk calculation methods in more detail. Nonetheless, nearly 20% of women did not believe their personalized risk numbers. The most common reason for rejecting the risk estimate was a belief that it did not fully account for personal and family history. Conclusions The benefits of tailored risk statistics may be attenuated by a tendency for people to be skeptical that these risk estimates apply to them personally. Practice Implications Decision aids may provide risk information that is not accepted by patients, but addressing the patients’ personal circumstances may lead to greater acceptance. PMID:23623330

  20. A controlled release of ibuprofen by systematically tailoring the morphology of mesoporous silica materials

    International Nuclear Information System (INIS)

    Qu Fengyu; Zhu Guangshan; Lin Huiming; Zhang Weiwei; Sun Jinyu; Li Shougui; Qiu Shilun

    2006-01-01

    A series of mesoporous silica materials with similar pore sizes, different morphologies and variable pore geometries were prepared systematically. In order to control drug release, ibuprofen was employed as a model drug and the influence of morphology and pore geometry of mesoporous silica on drug release profiles was extensively studied. The mesoporous silica and drug-loaded samples were characterized by X-ray diffraction, Fourier transform IR spectroscopy, N 2 adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. It was found that the drug-loading amount was directly correlated to the Brunauer-Emmett-Teller surface area, pore geometry, and pore volume; while the drug release profiles could be controlled by tailoring the morphologies of mesoporous silica carriers. - Graphical abstract: The release of ibuprofen is controlled by tailoring the morphologies of mesoporous silica. The mesoporous silica and drug-loaded samples are characterized by powder X-ray diffraction, Fourier transform IR spectroscopy, N 2 adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. The drug-loading amount is directly correlated to the Brunauer-Emmett-Teller surface area, pore geometry, and pore volume; while the drug release profiles can be controlled by tailoring the morphologies of mesoporous silica carriers

  1. FitMindKit: Randomised controlled trial of an automatically tailored online program for mood, anxiety, substance use and suicidality

    Directory of Open Access Journals (Sweden)

    Philip J. Batterham

    2018-06-01

    Full Text Available Purpose: Online mental health programs can be effective in reducing symptoms of depression, anxiety disorders, substance use and suicidal ideation. However, most existing e-mental health programs focus on a single domain of mental health, neglecting comorbidity. Furthermore, few programs are tailored to the symptom patterns of the individual user. FitMindKit was designed to overcome the gaps of existing e-mental health programs, providing tailored, transdiagnostic therapeutic content to address a range of comorbid mental health symptoms. A trial was conducted to test the program's efficacy. Methods: Australian adults with elevated symptoms of depression, anxiety, suicidal ideation and/or substance use were recruited through social media, with n=194 randomised into a fully-automated trial of a 10-day brief intervention. Participants were randomly allocated to receive FitMindKit tailored to their symptoms, an untailored generic version of FitMindKit, or an attention control. Results: Mixed model repeated measures ANOVA indicated that participants in both FitMindKit and the attention control had significant reductions in symptom composite scores. Effects were not significantly greater in the FitMindKit program relative to control, either at post-test or 3-month follow-up. No effects were detected for specific decreases in depression, generalized anxiety, social anxiety, panic, suicidal ideation or alcohol/substance use. There were no significant differences between the tailored and static versions in effectiveness or adherence. Participants in the tailored and static conditions were more satisfied than in the control condition, with some evidence favouring the tailored condition. High attrition reduced power to find effects. Conclusions: FitMindKit provides a model for addressing comorbid mental health symptoms in an online program, using automated tailoring to symptom patterns. Modifications to the program are recommended, along with the need for

  2. Evaluation of a Tailored Direct-Mail Marketing Strategy for Recruiting the 19- to 23-Year-Old Market.

    Science.gov (United States)

    1983-05-01

    17AD-A12.9 860 EVALUATION OF A TAILORED DIRECT-MAIL MARKETING STRATEGY 1/ FOR RECRUITNG TH.U) WESAT INC ROCKVILLE MD K FERNANDES ET AL MAY 83 NPRDC...STANDARDS-1963-A EVALUATION OF A TAILORED DIRECT-MAIL MARKETING STRATEGY FOR RECRUITING THE 19- TO 23-YEAR-OLD MARKET APPRVEDFORPUBLIC RELE AnE [B...EVALUATION OF A TAILORED DIRECT-MAIL MARKETING STRATEGY FOR RECRUITING THE 19- TO 23-YEAR-OLD MARKET Kathleen Fernandes Navy Personnel Research and

  3. Tailoring a response to youth binge drinking in an Aboriginal Australian community: a grounded theory study.

    Science.gov (United States)

    McCalman, Janya; Tsey, Komla; Bainbridge, Roxanne; Shakeshaft, Anthony; Singleton, Michele; Doran, Christopher

    2013-08-07

    While Aboriginal Australian health providers prioritise identification of local community health needs and strategies, they do not always have the opportunity to access or interpret evidence-based literature to inform health improvement innovations. Research partnerships are therefore important when designing or modifying Aboriginal Australian health improvement initiatives and their evaluation. However, there are few models that outline the pragmatic steps by which research partners negotiate to develop, implement and evaluate community-based initiatives. The objective of this paper is to provide a theoretical model of the tailoring of health improvement initiatives by Aboriginal community-based service providers and partner university researchers. It draws from the case of the Beat da Binge community-initiated youth binge drinking harm reduction project in Yarrabah. A theoretical model was developed using the constructivist grounded theory methods of concurrent sampling, data collection and analysis. Data was obtained from the recordings of reflective Community-Based Participatory Research (CBPR) processes with Aboriginal community partners and young people, and university researchers. CBPR data was supplemented with interviews with theoretically sampled project participants. The transcripts of CBPR recordings and interviews were imported into NVIVO and coded to identify categories and theoretical constructs. The identified categories were then developed into higher order concepts and the relationships between concepts identified until the central purpose of those involved in the project and the core process that facilitated that purpose were identified. The tailored alcohol harm reduction project resulted in clarification of the underlying local determinants of binge drinking, and a shift in the project design from a social marketing awareness campaign (based on short-term events) to a more robust advocacy for youth mentoring into education, employment and

  4. Preventing the obesity epidemic by second generation tailored health communication: an interdisciplinary review.

    Science.gov (United States)

    Enwald, Heidi Päivyt Karoliina; Huotari, Maija-Leena Aulikki

    2010-06-28

    The prevention of obesity and health concerns related to obesity are major challenges worldwide. The use of eHealth communication and the tailoring of information delivered via the Internet at the individual level may increase the effectiveness of interventions. Mastering behaviors related to nutrition, physical activity, and weight management are the main issues in preventing obesity, and the need for interdisciplinary knowledge within this area is obvious. The objectives were to review the literature on tailored health communication and to present an interdisciplinary analysis of studies on "second" generation tailored interventions aimed at behavior change in nutrition, physical activity, or weight management. A literature search was conducted of the main electronic information sources on health communication. Selection criteria were defined, and 23 intervention studies were selected. The content analysis focused on the following: study designs, objectives of behavior change, target groups, sample sizes, study lengths, attrition rates, theories applied, intervention designs, computer-based channels used, statistically significant outcomes from the perspective of tailoring, and possible biases of the studies. However, this was not a structured meta-analysis and cannot be replicated as such. Of the 23 studies, 21 were randomized controlled trials, and all focused on behavior change: 10 studies focused on behavior change in nutrition, 7 on physical activity, 2 on nutrition and physical activity, and 4 on weight management. The target groups and the number of participants varied: 8 studies included more than 500 participants, and 6 studies included less than 100. Most studies were short; the duration of 20 studies was 6 months or less. The Transtheoretical Model was applied in 14 of the 23 studies, and feedback as a tailoring mechanism was used in addition to an Internet site (or program) in 15 studies and in addition to email in 11 studies. Self-reporting was used

  5. The Cuban Missile Crisis of 1962: A Case Study of the Tailored Use of Instruments of National Power

    National Research Council Canada - National Science Library

    Charney, Sean S

    2008-01-01

    President Kennedy and the EXCOM were able to achieve foreign policy success during the Cuban Missile Crisis because of their ability to tailor the pertinent IOPs and implement them to reach a desired...

  6. Ecological Momentary Assessments and Automated Time Series Analysis to Promote Tailored Health Care : A Proof-of-Principle Study

    NARCIS (Netherlands)

    van der Krieke, Lian; Emerencia, Ando C; Bos, Elisabeth H; Rosmalen, Judith Gm; Riese, Harriëtte; Aiello, Marco; Sytema, Sjoerd; de Jonge, Peter

    2015-01-01

    BACKGROUND: Health promotion can be tailored by combining ecological momentary assessments (EMA) with time series analysis. This combined method allows for studying the temporal order of dynamic relationships among variables, which may provide concrete indications for intervention. However,

  7. Individually tailored internet-based cognitive behavior therapy for adolescents with anxiety disorders: A pilot effectiveness study

    Directory of Open Access Journals (Sweden)

    Kristin Silfvernagel

    2015-09-01

    Based on the results from this pilot study the tentative conclusion might be that tailored internet delivered CBT could be useful for adolescents with anxiety disorders along with standard treatment delivered in child and adolescent psychiatric clinics.

  8. Individually tailored internet-based cognitive behavior therapy for adolescents with anxiety disorders: A pilot effectiveness study

    OpenAIRE

    Kristin Silfvernagel; Malin Gren-Landell; Marie Emanuelsson; Per Carlbring; Gerhard Andersson

    2015-01-01

    This is the first study of adolescents suffering from anxiety disorder in Sweden to receive individually tailored internet-based treatment within a child and adolescent psychiatric clinic. The primary aim of this effectiveness study was to examine the effects of tailored internet-based cognitive behaviour therapy for adolescents. 11 adolescents, aged 15-19 years, were allocated to treatment after assessment. Screening consisted of online questionnaires followed by a diagnostic face-to-face...

  9. Preventing smoking relapse via Web-based computer-tailored feedback: a randomized controlled trial.

    Science.gov (United States)

    Elfeddali, Iman; Bolman, Catherine; Candel, Math J J M; Wiers, Reinout W; de Vries, Hein

    2012-08-20

    Web-based computer-tailored approaches have the potential to be successful in supporting smoking cessation. However, the potential effects of such approaches for relapse prevention and the value of incorporating action planning strategies to effectively prevent smoking relapse have not been fully explored. The Stay Quit for You (SQ4U) study compared two Web-based computer-tailored smoking relapse prevention programs with different types of planning strategies versus a control group. To assess the efficacy of two Web-based computer-tailored programs in preventing smoking relapse compared with a control group. The action planning (AP) program provided tailored feedback at baseline and invited respondents to do 6 preparatory and coping planning assignments (the first 3 assignments prior to quit date and the final 3 assignments after quit date). The action planning plus (AP+) program was an extended version of the AP program that also provided tailored feedback at 11 time points after the quit attempt. Respondents in the control group only filled out questionnaires. The study also assessed possible dose-response relationships between abstinence and adherence to the programs. The study was a randomized controlled trial with three conditions: the control group, the AP program, and the AP+ program. Respondents were daily smokers (N = 2031), aged 18 to 65 years, who were motivated and willing to quit smoking within 1 month. The primary outcome was self-reported continued abstinence 12 months after baseline. Logistic regression analyses were conducted using three samples: (1) all respondents as randomly assigned, (2) a modified sample that excluded respondents who did not make a quit attempt in conformance with the program protocol, and (3) a minimum dose sample that also excluded respondents who did not adhere to at least one of the intervention elements. Observed case analyses and conservative analyses were conducted. In the observed case analysis of the randomized sample

  10. Development of a computer-tailored nutrition and physical activity intervention for lower-educated women of Dutch, Turkish and Moroccan origin using content matching and ethnic identity tailoring

    Directory of Open Access Journals (Sweden)

    Kristina Romeike

    2016-09-01

    Full Text Available Abstract Background Unhealthy dietary and physical activity (PA patterns are highly prevalent in most Western countries, especially among lower-educated and ethnic minority groups. Therefore, interventions to promote healthy eating and physical activity that can reach large numbers of lower-educated people are needed. When developing interventions, the ethnic diversity of the lower-educated population may be taken into account to make intervention material more appealing to the target group. This article describes the development and evaluation of two computer-tailored nutrition and physical activity interventions for lower-educated Dutch, Turkish and Moroccan women. One version is tailored to sociocognitive variables (traditional tailoring, while the other is additionally tailored to ethnic identity (EI-tailoring. Method Using intervention mapping, two evidence- and theory-based interventions were developed. In the traditional tailoring intervention, messages are tailored to health behavior, awareness of own behavior, attitude and self-efficacy. The behavior change techniques used to address these factors are: descriptive and evaluative feedback, arguments, modeling, goal setting, planning, barrier identification and advice on how to deal with barriers, stimulating resistance to social pressure, mobilization of social support (nontailored, active learning (nontailored and iterative feedback. In the EI-tailoring intervention, the material is additionally tailored to ethnic identity (EI. This means that recipients who feel strongly attached to their ethnic background receive different intervention material than recipients with a weak attachment to their background. This includes, for instance, the use of more traditional colors, role models that match with their origin and advice messages that refer to their ethnicity of origin. Discussion Developing an intervention that matches the needs of this specific target population was challenging due to

  11. Matrix supported tailored polymer for solid phase extraction of fluoride from variety of aqueous streams

    International Nuclear Information System (INIS)

    Thakur, Neha; Kumar, Sanjukta A.; Wagh, D.N.; Das, Sadananda; Pandey, Ashok K.; Kumar, Sangita D.; Reddy, A.V.R.

    2012-01-01

    Highlights: ► Th complexed with poly (bis[2-(methacryloyloxy)-ethyl]phosphate) as tailored polymer membranes. ► Membranes offered high capacity and selectivity for fluoride in aqueous media. ► Quantitative uptake (80 ± 5%) of fluoride. ► Fast sorption kinetics. ► Reusability of polymer membranes. - Abstract: Fluoride related health hazards (fluorosis) are a major environmental problem in many regions of the world. It affects teeth; skeleton and its accumulation over a long period can lead to changes in the DNA structure. It is thus absolutely essential to bring down the fluoride levels to acceptable limits. Here, we present a new inorganic–organic hybrid polymer sorbent having tailored fixed-sites for fluoride sorption. The matrix supported poly (bis[2-(methacryloyloxy)-ethyl]phosphate) was prepared by photo-initiator induced graft-polymerization in fibrous and microporous (sheet) host poly(propylene) substrates. These substrates were conditioned for selective fluoride sorption by forming thorium complex with phosphate groups on bis[2-methacryloyloxy)-ethyl] phosphate (MEP). These tailored sorbents were studied for their selectivity towards fluoride in aqueous media having different chemical conditions. The fibrous sorbent was found to take up fluoride with a faster rate (15 min for ≈76% sorption) than the sheet sorbent. But, the fluoride loading capacity of sheet sorbent (4320 mg kg −1 ), was higher than fibrous and any other sorbent reported in the literature so far. The sorbent developed in the present work was found to be reusable after desorption of fluoride using NaOH solution. It was tested for solid phase extraction of fluoride from natural water samples.

  12. An individually-tailored smoking cessation intervention for rural Veterans: a pilot randomized trial

    Directory of Open Access Journals (Sweden)

    Mark W. Vander Weg

    2016-08-01

    Full Text Available Abstract Background Tobacco use remains prevalent among Veterans of military service and those residing in rural areas. Smokers frequently experience tobacco-related issues including risky alcohol use, post-cessation weight gain, and depressive symptoms that may adversely impact their likelihood of quitting and maintaining abstinence. Telephone-based interventions that simultaneously address these issues may help to increase treatment access and improve outcomes. Methods This study was a two-group randomized controlled pilot trial. Participants were randomly assigned to an individually-tailored telephone tobacco intervention combining counseling for tobacco use and related issues including depressive symptoms, risky alcohol use, and weight concerns or to treatment provided through their state tobacco quitline. Selection of pharmacotherapy was based on medical history and a shared decision interview in both groups. Participants included 63 rural Veteran smokers (mean age = 56.8 years; 87 % male; mean number of cigarettes/day = 24.7. The primary outcome was self-reported 7-day point prevalence abstinence at 12 weeks and 6 months. Results Twelve-week quit rates based on an intention-to-treat analysis did not differ significantly by group (Tailored = 39 %; Quitline Referral = 25 %; odds ratio [OR]; 95 % confidence interval [CI] = 1.90; 0.56, 5.57. Six-month quit rates for the Tailored and Quitline Referral conditions were 29 and 28 %, respectively (OR; 95 % CI = 1.05; 0.35, 3.12. Satisfaction with the Tailored tobacco intervention was high. Conclusions Telephone-based treatment that concomitantly addresses other health-related factors that may adversely affect quitting appears to be a promising strategy. Larger studies are needed to determine whether this approach improves cessation outcomes. Trial registration ClinicalTrials.gov identifier number NCT01592695 registered 11 April 2012.

  13. An Internet-based tailored hearing protection intervention for firefighters: development process and users' feedback.

    Science.gov (United States)

    Hong, OiSaeng; Eakin, Brenda L; Chin, Dal Lae; Feld, Jamie; Vogel, Stephen

    2013-07-01

    Noise-induced hearing loss is a significant occupational injury for firefighters exposed to intermittent noise on the job. It is important to educate firefighters about using hearing protection devices whenever they are exposed to loud noise. Computer technology is a relatively new health education approach and can be useful for tailoring specific aspects of behavioral change training. The purpose of this study is to present the development process of an Internet-based tailored intervention program and to assess its efficacy. The intervention programs were implemented for 372 firefighters (mean age = 44 years, Caucasian = 82%, male = 95%) in three states (California, Illinois, and Indiana). The efficacy was assessed from firefighters' feedback through an Internet-based survey. A multimedia Internet-based training program was developed through (a) determining program content and writing scripts, (b) developing decision-making algorithms for tailoring, (c) graphic design and audio and video productions, (d) creating computer software and a database, and (e) postproduction quality control and pilot testing. Participant feedback regarding the training has been very positive. Participants reported that they liked completing the training via computer (83%) and also that the Internet-based training program was well organized (97%), easy to use (97%), and effective (98%) and held their interest (79%). Almost all (95%) would recommend this Internet training program to other firefighters. Interactive multimedia computer technology using the Internet was a feasible mode of delivery for a hearing protection intervention among firefighters. Participants' favorable feedback strongly supports the continued utilization of this approach for designing and developing interventions to promote healthy behaviors.

  14. Tailoring the properties of cholecyst-derived extracellular matrix using carbodiimide cross-linking.

    LENUS (Irish Health Repository)

    Burugapalli, Krishna

    2009-01-01

    Modulation of properties of extracellular matrix (ECM) based scaffolds is key for their application in the clinical setting. In the present study, cross-linking was used as a tool for tailoring the properties of cholecyst-derived extracellular matrix (CEM). CEM was cross-linked with varying cross-linking concentrations of N,N-(3-dimethyl aminopropyl)-N\\'-ethyl carbodiimide (EDC) in the presence of N-hydroxysuccinimide (NHS). Shrink temperature measurements and ATR-FT-IR spectra were used to determine the degree of cross-linking. The effect of cross-linking on degradation was tested using the collagenase assay. Uniaxial tensile properties and the ability to support fibroblasts were also evaluated as a function of cross-linking. Shrink temperature increased from 59 degrees C for non-cross-linked CEM to 78 degrees C for the highest EDC cross-linking concentration, while IR peak area ratios for the free -NH(2) group at 3290 cm(-1) to that of the amide I band at 1635 cm(-1) decreased with increasing EDC cross-linking concentration. Collagenase assay demonstrated that degradation rates for CEM can be tailored. EDC concentrations 0 to 0.0033 mmol\\/mg CEM were the cross-linking concentration range in which CEM showed varied susceptibility to collagenase degradation. Furthermore, cross-linking concentrations up to 0.1 mmol EDC\\/mg CEM did not have statistically significant effect on the uniaxial tensile strength, as well as morphology, viability and proliferation of fibroblasts on CEM. In conclusion, the degradation rates of CEM can be tailored using EDC-cross-linking, while maintaining the mechanical properties and the ability of CEM to support cells.

  15. Development of a tailored strategy to improve postpartum hemorrhage guideline adherence.

    Science.gov (United States)

    de Visser, Suzan M; Woiski, Mallory D; Grol, Richard P; Vandenbussche, Frank P H A; Hulscher, Marlies E J L; Scheepers, Hubertina C J; Hermens, Rosella P M G

    2018-02-08

    Despite the introduction of evidence based guidelines and practical courses, the incidence of postpartum hemorrhage shows an increasing trend in developed countries. Substandard care is often found, which implies an inadequate implementation in high resource countries. We aimed to reduce the gap between evidence-based guidelines and clinical application, by developing a strategy, tailored to current barriers for implementation. The development of the implementation strategy consisted of three phases, supervised by a multidisciplinary expert panel. In the first phase a framework of the strategy was created, based on barriers to optimal adherence identified among professionals and patients together with evidence on effectiveness of strategies found in literature. In the second phase, the tools within the framework were developed, leading to a first draft. In the third phase the strategy was evaluated among professionals and patients. The professionals were asked to give written feedback on tool contents, clinical usability and inconsistencies with current evidence care. Patients evaluated the tools on content and usability. Based on the feedback of both professionals and patients the tools were adjusted. We developed a tailored strategy to improve guideline adherence, covering the trajectory of the third trimester of pregnancy till the end of the delivery. The strategy, directed at professionals, comprehending three stop moments includes a risk assessment checklist, care bundle and time-out procedure. As patient empowerment tools, a patient passport and a website with patient information was developed. The evaluation among the expert panel showed all professionals to be satisfied with the content and usability and no discrepancies or inconsistencies with current evidence was found. Patients' evaluation revealed that the information they received through the tools was incomplete. The tools were adjusted accordingly to the missing information. A usable, tailored

  16. LGBTQ Youth and Young Adult Perspectives on a Culturally Tailored Group Smoking Cessation Program.

    Science.gov (United States)

    Baskerville, Neill Bruce; Shuh, Alanna; Wong-Francq, Katy; Dash, Darly; Abramowicz, Aneta

    2017-08-01

    The prevalence of smoking among LGBTQ youth and young adults (YYAs) is much higher than that of non-LGBTQ young people. The current study explored LGBTQ YYA perceptions of a culturally tailored group smoking cessation counselling program, along with how the intervention could be improved. We conducted focus groups (n = 24) with 204 LGBTQ YYAs in Toronto and Ottawa, Canada. Open-ended questions focused on their feelings, likes and dislikes, concerns and additional ideas for a culturally tailored group cessation counselling intervention. Focus group transcripts were coded thematically and analyzed. Overall, YYAs were ambivalent towards the concept of a culturally tailored, group cessation counselling program. Although several participants were attracted to the LGBTQ friendly and social benefits of such a program (eg, good support system), many also had concerns. Particularly, the possibility that other group members might trigger them to smoke was a frequently stated issue. Focus group members also noted lack of motivation to attend the group, and that the group program may be inaccessible depending on where and when the program was offered. Several suggestions were made as to how to ameliorate the expressed issues related to inaccessibility or lack of attractiveness. This study is among the first to gain the perspectives of LGBTQ YYAs on culturally tailored group cessation strategies in Canada. We identified components of group cessation programs that are both favored and not favored among LGBTQ YYAs, as well as suggestions as to how to make group cessation programs more appealing. This study is particularly relevant as smoking cessation programs are one of the most commonly offered and published cessation interventions for the LGBTQ community, yet little is understood in terms of preferences of LGBTQ YYA smokers. Given the disparity in the prevalence of smoking among LGBTQ young people compared to their non-LGBTQ peers, research on effective intervention strategies

  17. Healthy Harlem: empowering health consumers through social networking, tailoring and web 2.0 technologies.

    Science.gov (United States)

    Khan, Sharib A; McFarlane, Delano J; Li, Jianhua; Ancker, Jessica S; Hutchinson, Carly; Cohall, Alwyn; Kukafka, Rita

    2007-10-11

    Consumer health informatics has emerged as a strategy to inform and empower patients for self management of their health. The emergence of and explosion in use of user-generated online media (e.g.,blogs) has created new opportunities to inform and educate people about healthy living. Under a prevention research project, we are developing a website that utilizes social content collaboration mediums in conjunction with open-source technologies to create a community-driven resource that provides users with tailored health information.

  18. Efficient Excitation of Channel Plasmons in Tailored, UV-Lithography-Defined V-Grooves

    DEFF Research Database (Denmark)

    Smith, Cameron L. C.; Thilsted, Anil Haraksingh; Garcia-Ortiz, Cesar E.

    2014-01-01

    We demonstrate the highly efficient (>50%) conversion of freely propagating light to channel plasmon-polaritons (CPPs) in gold V-groove waveguides using compact 1.6 μm long waveguide-termination coupling mirrors. Our straightforward fabrication process, involving UV-lithography and crystallographic...... silicon etching, forms the coupling mirrors innately and ensures exceptional-quality, wafer-scale device production. We tailor the V-shaped profiles by thermal silicon oxidation in order to shift initially wedge-located modes downward into the V-grooves, resulting in well-confined CPPs suitable...

  19. Applications of resonance-averaged gamma-ray spectroscopy with tailored beams

    International Nuclear Information System (INIS)

    Chrien, R.E.

    1982-01-01

    The use of techniques based on the direct experimental averaging over compound nuclear capturing states has proved valuable for investigations of nuclear structure. The various methods that have been employed are described, with particular emphasis on the transmission filter, or tailored beam technique. The mathematical limitations on averaging imposed by the filter band pass are discussed. It can readily be demonstrated that a combination of filters at different energies can form a powerful method for spin and parity predictions. Several recent examples from the HFBR program are presented

  20. The Role of Orthogonal Polynomials in Tailoring Spherical Distributions to Kurtosis Requirements

    Directory of Open Access Journals (Sweden)

    Luca Bagnato

    2016-08-01

    Full Text Available This paper carries out an investigation of the orthogonal-polynomial approach to reshaping symmetric distributions to fit in with data requirements so as to cover the multivariate case. With this objective in mind, reference is made to the class of spherical distributions, given that they provide a natural multivariate generalization of univariate even densities. After showing how to tailor a spherical distribution via orthogonal polynomials to better comply with kurtosis requirements, we provide operational conditions for the positiveness of the resulting multivariate Gram–Charlier-like expansion, together with its kurtosis range. Finally, the approach proposed here is applied to some selected spherical distributions.

  1. Using personas to tailor educational messages to the preferences of coronary heart disease patients.

    Science.gov (United States)

    Vosbergen, S; Mulder-Wiggers, J M R; Lacroix, J P; Kemps, H M C; Kraaijenhagen, R A; Jaspers, M W M; Peek, N

    2015-02-01

    Although tailoring health education messages to individual characteristics of patients has shown promising results, most patient education materials still take a one-size-fits-all approach. The aim of this study was to develop a method for tailoring health education messages to patients' preferences for various message features, using the concept of personas. This is a preliminary study focused on education for coronary heart disease (CHD) patients. This study used a three-step approach. First, we created personas by (i) performing k-means cluster analysis on data from an online survey that assessed the preferences of 213 CHD patients for various message features and, (ii) creating a vivid description of the preferences per patient cluster in an iterative process with the research team. Second, we developed adaptation rules to tailor existing educational messages to the resulting personas. Third, we conducted a pilot validation by adapting nine existing educational messages to each of the personas. These messages and the resulting personas were then presented to a separate group of 38 CHD patients who visited the cardiology outpatient clinic. They were first asked to choose their most preferred, second most preferred, and least preferred persona. Subsequently, they were asked to rate three of the adapted messages; one for every of the persona choices. We created five personas that pertained to five patient clusters. Personas varied mainly on preferences for medical or lay language, current or future temporal perspective, and including or excluding explicit health risks. Fifty-five different adaptation rules were developed, primarily describing adaptations to the message's perspective, level of detail, sentence structure, and terminology. Most participants in the validation study could identify with one of the five personas, although some of them found it hard to choose. On average, 68.5% of all participants rated the messages that matched their most preferred

  2. Optimizing diesel combustion behaviour with tailor-made fuels from biomass

    Energy Technology Data Exchange (ETDEWEB)

    Kremer, Florian; Heuser, Benedikt [RWTH Aachen Univ. (Germany). Lehrstuhl fuer Verbrennungskraftmaschinen; Klankermayer, Juergen [RWTH Aachen Univ. (Germany). Inst. fuer Technische und Makromolekulare Chemie; Pischinger, Stefan

    2013-06-01

    Modem biofuels offer a vast potential to decrease engine out emissions while at the same time allowing a reduction of greenhouse gases produced from individual mobility. In order to deeply investigate and improve the complete path from biofuel production to combustion, in 2007 the cluster of excellence ''Tailor-Made Fuels from Biomass'' was installed at RWTH Aachen University. Since the start of the work in the cluster a whole variety of possible fuel candidates were identified and investigated, eventually leading to the definition of 2-methyltetrahydrofurane (2-MTHF) as a tailor-made biofuel for passenger car diesel engines. With 2-MTHF, a nearly soot-free combustion can be realized. This soot-free combustion behavior can partially be explained by the low self-ignition tendency and the therefore observed long ignition delays. Hereby, a good mixture preparation can be realized. This long ignition delay also results in high HC- and CO emissions, though, which are partially accompanied by increased noise emissions. In this work, the addition of di-n-butylether (DNBE) to 2-MTHF to reduce the described disadvantages will be analyzed. DNBE, a fuel that can be obtained via a reaction pathway defined in TMFB, is characterized by an extremely high Cetane number (CN- 100) and therefore very high self-ignitability. The effects of different mixtures of DNBE and 2-MTHF from 0% to 100% especially on the HC- and CO- and noise emissions will be carefully analyzed. In addition, the overall emission performance will be compared to standard EN590 Diesel as reference fuel. The results show that an adapted addition of DNBE to 2-MTHF can lead to a significant reduction of HC-, CO- and noise emissions while not sacrificing the benefits gained from the 2-MTHF's long ignition delays with regard to the particulate emissions. It can be proven that the use of two tailored biofuels with different self-ignitability such as 2-MTHF and DNBE allows to tailor the

  3. Tailored graph ensembles as proxies or null models for real networks I: tools for quantifying structure

    International Nuclear Information System (INIS)

    Annibale, A; Coolen, A C C; Fernandes, L P; Fraternali, F; Kleinjung, J

    2009-01-01

    We study the tailoring of structured random graph ensembles to real networks, with the objective of generating precise and practical mathematical tools for quantifying and comparing network topologies macroscopically, beyond the level of degree statistics. Our family of ensembles can produce graphs with any prescribed degree distribution and any degree-degree correlation function; its control parameters can be calculated fully analytically, and as a result we can calculate (asymptotically) formulae for entropies and complexities and for information-theoretic distances between networks, expressed directly and explicitly in terms of their measured degree distribution and degree correlations.

  4. Applications of resonance-averaged gamma-ray spectroscopy with tailored beams

    International Nuclear Information System (INIS)

    Chrien, R.E.

    1982-01-01

    The use of techniques based on the direct experimental averaging over compound nuclear capturing states has proved valuable for investigations of nuclear structure. The various methods that have been employed are described, with particular emphasis on the transmission filter, or tailored beam technique. The mathematical limitations on averaging imposed by the filtre band pass are discussed. It can readily be demonstrated that a combination of filters at different energies can form a powerful method for spin and parity predictions. Several recent examples from the HFBR program are presented. (author)

  5. Role of plasma activation in tailoring the nanostructure of multifunctional oxides thin films

    Energy Technology Data Exchange (ETDEWEB)

    Giangregorio, Maria M.; Losurdo, Maria; Capezzuto, Pio [Institute of Inorganic Methodologies and Plasmas, IMIP-CNR, and Department of Chemistry, University of Bari, via Orabona, 4-70125 Bari (Italy); Bruno, Giovanni [Institute of Inorganic Methodologies and Plasmas, IMIP-CNR, and Department of Chemistry, University of Bari, via Orabona, 4-70125 Bari (Italy)], E-mail: giovanni.bruno@ba.imip.cnr.it

    2009-03-01

    Potential of O{sub 2} remote plasmas for improving structural, morphological and optical properties of various multifunctional oxides thin films both during plasma assisted growth as well as by post-growth treatments is discussed. In particular, an O{sub 2} remote plasma metalorganic chemical vapor deposition (RP-MOCVD) route is presented for tailoring the structural, morphological and optical properties of Er{sub 2}O{sub 3} and ZnO films. Furthermore, post-growth room-temperature remote O{sub 2} plasma treatments of indium-tin-oxides (ITO) films are demonstrated to be effective in improving morphology of ITO films.

  6. Tailoring the electronic structure of graphene for catalytic and nanoelectronic applications

    DEFF Research Database (Denmark)

    Vallejo, Federico Calle; García Lastra, Juan Maria

    2011-01-01

    We explore possible routes to tailor the catalytic and electronic properties of graphitic materials through doping. The investigation is carried out by theoretical Density Functional Theory (DFT) and tight-binding calculations. We show that Feporphyrin- like sites inserted in graphitic sheets......, created after doping are active towards the Oxygen Reduction reaction (ORR). On the other hand, we also show that it is possible to tune the opening of a gap in the band structure of graphene by changing the adsorption periodicity of molecules on its surface....

  7. A viable way to tailor carbon nanomaterials by irradiation-induced transformations

    International Nuclear Information System (INIS)

    Caudillo, R.; Troiani, H.E.; Miki-Yoshida, M.; Marques, M.A.L.; Rubio, A.; Yacaman, M.J.

    2005-01-01

    Since the discovery of carbon nanotubes (CNT), transmission electron microscopy (TEM) has been the most important tool in their investigation. It is possible to use electron irradiation in a TEM to construct a single-walled carbon nanotube (SWCNT) from an amorphous carbon film. Here we show that such a synthesis method creates a large number of carbon ad-atoms, which after some critical amount of radiation act to restore the system by reconstructing the carbon film. The behavior of the ad-atoms can be controlled by adjusting the current density in the microscope, suggesting that carbon nanomaterials can be tailored by electron irradiation

  8. Contract Renewal Information - non-blank

    Data.gov (United States)

    Department of Housing and Urban Development — Multifamily Portfolio datasets (section 8 contracts) - The information has been compiled from multiple data sources within FHA or its contractors. HUD oversees more...

  9. Neljatunnine teatrietendus Haimres / Kaupo Suuster, Tõnis Blank

    Index Scriptorium Estoniae

    Suuster, Kaupo

    2008-01-01

    Raplamaa harrastusteatrite festivalil Haimre kultuurimajas nähtud etendustest. Hageri näitering : A. Kivirähk "Atendaat", Valgu näitetrupp M.O.T.T. : A. Kitzbergi ainetel "Kosjasõit Valgu moodi", Kivi-Vigala näitering Sõbra-vägi : A. Liives "Need kauged ajad", Kodila näitetrupp : E. Bornhöhe "Tasuja", Rapla Teatritegemise Selts : "Lastejutt inetutele", Vana-Vigala näitetrupp Topelt-Kiiks : A. Kivirähk "Kalevipoeg", Kuimetsa näitetrupp : J. Orgussaar "Suured vaimud", Varbola näitetrupp V90 : "Eesti läbi aja"

  10. Personalization and perceived personal relevance in computer-tailored persuasion in smoking cessation.

    Science.gov (United States)

    Dijkstra, Arie; Ballast, Karien

    2012-02-01

    In most computer-tailored interventions, the recipient's name is used to personalize the information. This is done to increase the process of persuasion but few empirical data exist that support this notion. An experimental laboratory study was conducted to test the effects of mentioning the participants name and to study whether it was related to the depth of processing in a 2 (personalization/standard) × 2 (weak/strong arguments) design. Over 120 student smokers were randomly assigned to one of the four experimental conditions in which they read smoking cessation messages offering (pre-tested) strong or weak arguments. Personalization was applied by mentioning the recipient's first name three times in the text. The intention to quit smoking was the dependent variable. Personalization increased persuasion when perceived personal relevance was high, but it decreased persuasion when perceived personal relevance was low. The effects on persuasion were only present in the case of strong arguments. Personalization is not always effective, and it may even lead to less persuasion. Therefore, this often used way to tailor messages must be applied with care. ©2011 The British Psychological Society.

  11. The importance of building trust and tailoring interactions when meeting older adults' health literacy needs.

    Science.gov (United States)

    Brooks, Charlotte; Ballinger, Claire; Nutbeam, Don; Adams, Jo

    2017-11-01

    Health literacy is the ability to access, understand and use health information. This study qualitatively explored the views and experiences of older adults with varying health literacy levels who had attended a falls clinic on their overall experience of the falls clinic, access to the service and provider-patient interaction. Individual semi-structured interviews were conducted with nine older adults using a falls clinic in England. Health literacy was assessed using the REALM and NVS-UK. Interviews were audio-recorded, transcribed verbatim and interrogated using interpretative phenomenological analysis (IPA). Two superordinate themes emerged from the analysis: The importance of trust and relationship building to achieve effective communication with older adults; and the importance of tailoring education and healthcare to older adults' individual health literacy needs and preferences. The findings corroborate previous research emphasising the importance of face-to-face communication in responding to older adults' individual health literacy needs. Building trust in the relationship and tailoring communication to older adults' individual attributes and preferred learning styles is essential. Healthcare practitioners and managers should consider how service organisation and communication methods can enhance positive and effective relationships with patients. Improved training could support healthcare providers in meeting patients' personal communication needs. Implications for Rehabilitation Rehabilitation professionals should be aware of their patients' individual health literacy needs and communication/learning preferences. It is important to build relationships and trust with older adults attending rehabilitation services. Further training for rehabilitation professionals could support them in meeting patients' personal communication needs.

  12. Toward the Tailoring of Sexual Health Education Messages for Young Women: A Focus on Tourist Experiences.

    Science.gov (United States)

    Berdychevsky, Liza

    2017-01-01

    Perceived anonymity and decreased influence of sexual double standards in tourism provide female travelers with opportunities for sexual experimentation and risk taking. The purpose of this study was (a) to identify the clusters of risk takers among young women based on their perceptions of and motivations for sexual risk taking in tourism and (b) to profile the clusters with respect to the psychological, sexual, demographic, and tourist characteristics. The data were collected through an online survey of 853 women (age in years: M = 23.5, SD = 6.67). Five clusters of sexual risk takers emerged based on their factor-analyzed risk perceptions and motivations. These clusters were interpreted as (a) diversely motivated broad risk perceivers; (b) fun-seeking broad risk perceivers; (c) diversely motivated physical risk perceivers; (d) anonymity- and empowerment-seeking risk disregarders; and (e) unmotivated broad risk perceivers. Women in these clusters differed in their intentions to engage in sexual risk taking in tourism, sensation-seeking propensities, perceptions of tourist characteristics, levels of sexual experience, and demographic backgrounds. Results suggest tailoring sexual health promotion messages based on cluster affiliation, leveraging cluster-specific risk perceptions, motivations, and personal characteristics. This study provides recommendations for individually tailored, context-specific, age-appropriate, and gender-sensitive sexual health education programs.

  13. Tailored instructor feedback leads to more effective virtual-reality laparoscopic training.

    Science.gov (United States)

    Paschold, M; Huber, T; Zeißig, S R; Lang, H; Kneist, Werner

    2014-03-01

    Laparoscopic novices begin at different performance levels, and studies on tailored training concepts are warranted. The effect of verbal instructor feedback has been investigated with varying results, and its effectiveness in virtual-reality laparoscopic (VRL) simulations still is unclear. This study aimed to determine whether laparoscopic novices with lower initial performance statuses may profit from training with intensive instructor feedback. A prospective, single-blinded study was performed within a week-long curricular course. In this study, 20 medical students performed a complex bimanual maneuver on a VRL simulator. There was a division in performance levels, with a high-performer group (HPG) that received a better median score and a low-performer group (LPG). During the training phase, only the initial LPG received standardized instructor feedback in a one-to-one setting. The final assessment of skills for both groups involved performing the task without feedback at the end of the course. The HPG and LPG showed significantly different initial performance levels according global and categorized (time, economics, error) scores (p training concept with instructor feedback limited to the LPG. The tailored training was effective and economic for the laparoscopic novices and their teachers.

  14. Design of Tailored Non-Crimp Fabrics Based on Stitching Geometry

    Science.gov (United States)

    Krieger, Helga; Gries, Thomas; Stapleton, Scott E.

    2018-02-01

    Automation of the preforming process brings up two opposing requirements for the used engineering fabric. On the one hand, the fabric requires a sufficient drapeability, or low shear stiffness, for forming into double-curved geometries; but on the other hand, the fabric requires a high form stability, or high shear stiffness, for automated handling. To meet both requirements tailored non-crimp fabrics (TNCFs) are proposed. While the stitching has little structural influence on the final part, it virtually dictates the TNCFs local capability to shear and drape over a mold during preforming. The shear stiffness of TNCFs is designed by defining the local stitching geometry. NCFs with chain stitch have a comparatively high shear stiffness and NCFs with a stitch angle close to the symmetry stitch angle have a very low shear stiffness. A method to design the component specific local stitching parameters of TNCFs is discussed. For validation of the method, NCFs with designed tailored stitching parameters were manufactured and compared to benchmark NCFs with uniform stitching parameters. The designed TNCFs showed both, generally a high form stability and in locally required zones a good drapeability, in drape experiments over an elongated hemisphere.

  15. Microbial production of polyhydroxybutyrate with tailor-made properties: an integrated modelling approach and experimental validation.

    Science.gov (United States)

    Penloglou, Giannis; Chatzidoukas, Christos; Kiparissides, Costas

    2012-01-01

    The microbial production of polyhydroxybutyrate (PHB) is a complex process in which the final quantity and quality of the PHB depend on a large number of process operating variables. Consequently, the design and optimal dynamic operation of a microbial process for the efficient production of PHB with tailor-made molecular properties is an extremely interesting problem. The present study investigates how key process operating variables (i.e., nutritional and aeration conditions) affect the biomass production rate and the PHB accumulation in the cells and its associated molecular weight distribution. A combined metabolic/polymerization/macroscopic modelling approach, relating the process performance and product quality with the process variables, was developed and validated using an extensive series of experiments and measurements. The model predicts the dynamic evolution of the biomass growth, the polymer accumulation, the consumption of carbon and nitrogen sources and the average molecular weights of the PHB in a bioreactor, under batch and fed-batch operating conditions. The proposed integrated model was used for the model-based optimization of the production of PHB with tailor-made molecular properties in Azohydromonas lata bacteria. The process optimization led to a high intracellular PHB accumulation (up to 95% g of PHB per g of DCW) and the production of different grades (i.e., different molecular weight distributions) of PHB. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Direct synthesis of antimicrobial coatings based on tailored bi-elemental nanoparticles

    Directory of Open Access Journals (Sweden)

    Giulio Benetti

    2017-03-01

    Full Text Available Ultrathin coatings based on bi-elemental nanoparticles (NPs are very promising to limit the surface-related spread of bacterial pathogens, particularly in nosocomial environments. However, tailoring the synthesis, composition, adhesion to substrate, and antimicrobial spectrum of the coating is an open challenge. Herein, we report on a radically new nanostructured coating, obtained by a one-step gas-phase deposition technique, and composed of bi-elemental Janus type Ag/Ti NPs. The NPs are characterized by a cluster-in-cluster mixing phase with metallic Ag nano-crystals embedded in amorphous TiO2 and present a promising antimicrobial activity including also multidrug resistant strains. We demonstrate the flexibility of the method to tune the embedded Ag nano-crystals dimension, the total relative composition of the coating, and the substrate type, opening the possibility of tailoring the dimension, composition, antimicrobial spectrum, and other physical/chemical properties of such multi-elemental systems. This work is expected to significantly spread the range of applications of NPs coatings, not only as an effective tool in the prevention of healthcare-associated infections but also in other technologically relevant fields like sensors or nano-/micro joining.

  17. Avoiding a knowledge gap in a multiethnic statewide social marketing campaign: is cultural tailoring sufficient?

    Science.gov (United States)

    Buchthal, O Vanessa; Doff, Amy L; Hsu, Laura A; Silbanuz, Alice; Heinrich, Katie M; Maddock, Jay E

    2011-03-01

    In 2007, the State of Hawaii, Healthy Hawaii Initiative conducted a statewide social-marketing campaign promoting increased physical activity and nutrition. The campaign included substantial formative research to develop messages tailored for Hawaii's multiethnic Asian and Pacific Islander populations. The authors conducted a statewide random digital dialing telephone survey to assess the campaign's comparative reach among individuals with different ethnicities and different levels of education and income. This analysis suggests that the intervention was successful in reaching its target ethnic audiences. However, a knowledge gap related to the campaign appeared among individuals with incomes less than 130% of the poverty level and those with less than a high school education. These results varied significantly by message and the communication channel used. Recall of supermarket-based messages was significantly higher among individuals below 130% of the poverty level and those between 18 and 35 years of age, 2 groups that showed consistently lower recall of messages in other channels. Results suggest that cultural tailoring for ethnic audiences, although important, is insufficient for reaching low-income populations, and that broad-based social marketing campaigns should consider addressing socioeconomic status-related channel preferences in formative research and campaign design.

  18. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    Science.gov (United States)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    A successive anchoring of Ti(NMe2)4, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1‧-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, 13C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands.

  19. Carbohydrates-tailored phase tunable systems composed of ionic liquids and water

    International Nuclear Information System (INIS)

    Chen Yuhaun; Wang Yige; Cheng Qingyan; Liu Xiaoli; Zhang Suojiang

    2009-01-01

    Carbohydrates were found to have substantial effects on tailoring phase tunable of ionic liquids (ILs) and water. Phase behaviors of 1-alkyl-3-methylimidazolium derivatives [C n mim]X (n = 2 to 10, X = Cl - , Br - , BF 4 - )-carbohydrate-H 2 O were systemically investigated. For hydrophilic ILs, 1-alkyl-3-methylimidazolium tetrafluoroborate [C n mim]BF 4 (n = 3, 4), the homogeneous aqueous solution can be induced to separate two aqueous phases by addition of carbohydrate. For hydrophobic ILs, [C n mim]BF 4 (n = 5 to 10), the mutual solubility with water can be lowered by addition of carbohydrate. While 1-alkyl-3-methyl imidazolium chloride ([C n mim]Cl, n = 2 to 10) and 1-alkyl-3-methyl imidazolium bromide ([C n mim]Br, n = 2 to 10) aqueous solutions never form aqueous two-phase systems (ATPSs) with carbohydrate in the investigated temperatures ranging from (242.15 to 373.15) K. The high partitioning behavior of phenol in [C n mim]BF 4 (n = 3 to 10) (1) + carbohydrate (2) + H 2 O (3) shows that carbohydrate-tailored {IL + H 2 O} systems are feasible to be used as extraction systems, especially in biological and environmental engineering.

  20. Modeling and Design Analysis Methodology for Tailoring of Aircraft Structures with Composites

    Science.gov (United States)

    Rehfield, Lawrence W.

    2004-01-01

    Composite materials provide design flexibility in that fiber placement and orientation can be specified and a variety of material forms and manufacturing processes are available. It is possible, therefore, to 'tailor' the structure to a high degree in order to meet specific design requirements in an optimum manner. Common industrial practices, however, have limited the choices designers make. One of the reasons for this is that there is a dearth of conceptual/preliminary design analysis tools specifically devoted to identifying structural concepts for composite airframe structures. Large scale finite element simulations are not suitable for such purposes. The present project has been devoted to creating modeling and design analysis methodology for use in the tailoring process of aircraft structures. Emphasis has been given to creating bend-twist elastic coupling in high aspect ratio wings or other lifting surfaces. The direction of our work was in concert with the overall NASA effort Twenty- First Century Aircraft Technology (TCAT). A multi-disciplinary team was assembled by Dr. Damodar Ambur to work on wing technology, which included our project.

  1. Bifacial DNA origami-directed discrete, three-dimensional, anisotropic plasmonic nanoarchitectures with tailored optical chirality.

    Science.gov (United States)

    Lan, Xiang; Chen, Zhong; Dai, Gaole; Lu, Xuxing; Ni, Weihai; Wang, Qiangbin

    2013-08-07

    Discrete three-dimensional (3D) plasmonic nanoarchitectures with well-defined spatial configuration and geometry have aroused increasing interest, as new optical properties may originate from plasmon resonance coupling within the nanoarchitectures. Although spherical building blocks have been successfully employed in constructing 3D plasmonic nanoarchitectures because their isotropic nature facilitates unoriented localization, it still remains challenging to assemble anisotropic building blocks into discrete and rationally tailored 3D plasmonic nanoarchitectures. Here we report the first example of discrete 3D anisotropic gold nanorod (AuNR) dimer nanoarchitectures formed using bifacial DNA origami as a template, in which the 3D spatial configuration is precisely tuned by rationally shifting the location of AuNRs on the origami template. A distinct plasmonic chiral response was experimentally observed from the discrete 3D AuNR dimer nanoarchitectures and appeared in a spatial-configuration-dependent manner. This study represents great progress in the fabrication of 3D plasmonic nanoarchitectures with tailored optical chirality.

  2. Antimicrobial activities of pyridinium-tailored pyrazoles bearing 1,3,4-oxadiazole scaffolds

    Directory of Open Access Journals (Sweden)

    Lei Zhou

    2017-11-01

    Full Text Available Herein, a series of pyridinium-tailored 5-trifluoromethylpyrazoles containing 1,3,4-oxadiazole moieties were constructed through coupling key pharmaceutical fragments of pyridinium, pyrazole, and 1,3,4-oxadiazole scaffolds in single molecular architecture. Antimicrobial results suggested that this kind of compounds exhibited significant activities against three types of pathogenic bacteria and six fungal strains in vitro. The minimal EC50 values of designed compounds against Xanthomonas oryzae pv. oryzae, Ralstonia solanacearum, and Xanthomonas axonopodis pv. citri could reach to 0.467, 1.04, and 0.600 μg/mL, respectively, through tuning and optimizing N-substituents, bridging atom, and alkyl length of the tailor. Antifungal assays revealed that all title molecules possessed considerable activity against Botrytis cinerea with the minimal EC50 value up to 2.71 μg/mL; and compounds I-8, I-10, I-12, II-12, and IV-12 showed the strongest growth suppression toward Rhizoctonia solani with EC50 values ranging from 10.2 to 24.0 μg/mL. Given the above results, this kind of compounds could serve as new lead compounds in the research of antimicrobial chemotherapy.

  3. Tailoring the mechanical and biodegradable properties of binary blends of biomedical thermoplastic elastomer.

    Science.gov (United States)

    Ang, Hui Ying; Chan, Jingni; Toong, Daniel; Venkatraman, Subbu S; Chia, Sing Joo; Huang, Ying Ying

    2018-03-01

    Blending polymers with complementary properties capitalizes on the inherent advantages of both components, making it possible to tailor the behaviour of the resultant material. A polymer blend consisting of an elastomer and thermoplastic can help to improve the mechanical integrity of the system without compromising on its processibility. A series of blends of biodegradable Poly(L-lactide-co-ɛ-caprolactone) (PLC) and Poly-(l,l-lactide-co-glycolic acid) (PLLGA), and PLC with Poly-(d,l-lactide-co-glycolic acid) (PDLLGA) were evaluated as a potential material for a biodegradable vesicourethral connector device. Based on the Tg of the blends, PLC/PLLGA formed an immiscible mixture while PLC/PDLLGA resulted in a compatible blend. The results showed that with the blending of PLC, the failure mode of PLLGA and PDLLGA changed from brittle to ductile fracture, with an significant decreas in tensile modulus and strength. SEM images demonstrated the different blend morphologies of different compositions during degradation. Gel Permeation Chromatography (GPC) and mechanical characterization revealed the degradation behaviour of the blends in this order (fastest to slowest): PDLLGA and PLC/PDLLGA blends > PLLGA and PLC/PLLGA blends > PLC. The PLC/PLLGA (70:30) blend was recommended as a suitable for the vesicourethral connector device application, highlighting the tailoring of blends to achieve a desired mechanical performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Nanohole 3D-size tailoring through polystyrene bead combustion during thin film deposition

    International Nuclear Information System (INIS)

    Peng Xiaofeng; Kamiya, Itaru

    2009-01-01

    A novel approach is presented for nanohole 3D-size tailoring. The process starts with a monolayer of polystyrene (PS) beads spun coat on silicon wafer as a template. The holes can be directly prepared through combustion of PS beads by oxygen plasma during metal or oxide thin film deposition. The incoming particles are prevented from adhering on PS beads by H 2 O and CO 2 generated from the combustion of the PS beads. The hole depth generally depends on the film thickness. The hole diameter can be tailored by the PS bead size, film deposition rate, and also the combustion speed of the PS beads. In this work, a series of holes with depth of 4-24 nm and diameter of 10-36 nm has been successfully prepared. The hole wall materials can be selected from metals such as Au or Pt and oxides such as SiO 2 or Al 2 O 3 . These templates could be suitable for the preparation and characterization of novel nanodevices based on single quantum dots or single molecules, and could be extended to the studies of a wide range of coating materials and substrates with controlled hole depth and diameters.

  5. Identification of a process window for tailored carburization of sheet metals in hot stamping

    Science.gov (United States)

    Horn, Alexander; Merklein, Marion

    2018-05-01

    Due to governmental regulations concerning the reduction of CO2 emissions and increasing safety standards, hot stamping of high strength boron manganese steel sheets has evolved into a state of the art process for manufacturing structural car body parts. The combined forming and in-die quenching process enables the formation of a fully martensitic microstructure. Therefore, press hardened steels offer high strength, but low ductility. In order to further improve passenger safety, a tailored configuration of mechanical properties is desired. Besides state of the art methods, like the application of locally different heat treatment temperatures or varying quenching rates, the adjustment of mechanical properties of sheet metals by a tailored carburization is a novel approach. For the carburization process, the specimens are first coated with graphite and subsequently heat treated. Within this contribution, different coating strategies as well as heat treatment temperatures and dwell times are investigated. For the determination of a process window, mechanical properties such as tensile strength and microhardness will be analyzed and correlated with the resulting microstructure.

  6. Tailoring the mechanical properties by molecular integration of flexible and stiff polymer networks.

    Science.gov (United States)

    Wan, Haixiao; Shen, Jianxiang; Gao, Naishen; Liu, Jun; Gao, Yangyang; Zhang, Liqun

    2018-03-28

    Designing a multiple-network structure at the molecular level to tailor the mechanical properties of polymeric materials is of great scientific and technological importance. Through the coarse-grained molecular dynamics simulation, we successfully construct an interpenetrating polymer network (IPN) composed of a flexible polymer network and a stiff polymer network. First, we find that there is an optimal chain stiffness for a single network (SN) to achieve the best stress-strain behavior. Then we turn to study the mechanical behaviors of IPNs. The result shows that the stress-strain behaviors of the IPNs appreciably exceed the sum of that of the corresponding single flexible and stiff network, which highlights the advantage of the IPN structure. By systematically varying the stiffness of the stiff polymer network of the IPNs, optimal stiffness also exists to achieve the best performance. We attribute this to a much larger contribution of the non-bonded interaction energy. Last, the effect of the component concentration ratio is probed. With the increase of the concentration of the flexible network, the stress-strain behavior of the IPNs is gradually enhanced, while an optimized concentration (around 60% molar ration) of the stiff network occurs, which could result from the dominant role of the enthalpy rather than the entropy. In general, our work is expected to provide some guidelines to better tailor the mechanical properties of the IPNs made of a flexible network and a stiff network, by manipulating the stiffness of the stiff polymer network and the component concentration ratio.

  7. Load bearing and stiffness tailored NiTi implants produced by additive manufacturing: a simulation study

    Science.gov (United States)

    Rahmanian, Rasool; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael; Elahinia, Mohammad

    2014-03-01

    Common metals for stable long-term implants (e.g. stainless steel, Titanium and Titanium alloys) are much stiffer than spongy cancellous and even stiffer than cortical bone. When bone and implant are loaded this stiffness mismatch results in stress shielding and as a consequence, degradation of surrounding bony structure can lead to disassociation of the implant. Due to its lower stiffness and high reversible deformability, which is associated with the superelastic behavior, NiTi is an attractive biomaterial for load bearing implants. However, the stiffness of austenitic Nitinol is closer to that of bone but still too high. Additive manufacturing provides, in addition to the fabrication of patient specific implants, the ability to solve the stiffness mismatch by adding engineered porosity to the implant. This in turn allows for the design of different stiffness profiles in one implant tailored to the physiological load conditions. This work covers a fundamental approach to bring this vision to reality. At first modeling of the mechanical behavior of different scaffold designs are presented as a proof of concept of stiffness tailoring. Based on these results different Nitinol scaffolds can be produced by additive manufacturing.

  8. Tailoring defect structure and optical absorption of porous anodic aluminum oxide membranes

    International Nuclear Information System (INIS)

    Yan Hongdan; Lemmens, Peter; Wulferding, Dirk; Shi, Jianmin; Becker, Klaus Dieter; Lin, Chengtian; Lak, Aidin; Schilling, Meinhard

    2012-01-01

    Defects influence the optical and electronic properties of nanostructured materials that may be relevant for applications. In self-organized anodic aluminum oxide (AAO) templates we have investigated the effect of annealing, doping and nanoscale metal deposition. Optical absorption spectroscopy has been used as a sensitive probe for the defect density in AAO templates. The electronic spectra are found to be dominated by bands which originate from oxygen-deficient color centers (F + , F and F 2 ). In annealing studies, the integrated absorption of the bands changes non-monotonically with annealing temperature and annealing time. This demonstrates that the concentration of defects can be optimized to tailor the optical properties of the AAO. Metallic Au wires are deposited in the template to establish a plasmonic template or array. The investigations provide an interesting insight into the interplay of reactivity and diffusivity on nanoscales. - Highlights: ► Preparation of metal wire arrays in oxide templates with tailored plasmonic properties. ► Oxygen defects are characterized using optical absorption and fluorescence. ► Optical absorption spectra are assigned to energy levels of oxygen vacancies (color centers). ► Annealing and electrodeposition of Au wires minimize defects maintaining the morphology.

  9. Tailoring vibration mode shapes using topology optimization and functionally graded material concepts

    International Nuclear Information System (INIS)

    Rubio, Wilfredo Montealegre; Paulino, Glaucio H; Silva, Emilio Carlos Nelli

    2011-01-01

    Tailoring specified vibration modes is a requirement for designing piezoelectric devices aimed at dynamic-type applications. A technique for designing the shape of specified vibration modes is the topology optimization method (TOM) which finds an optimum material distribution inside a design domain to obtain a structure that vibrates according to specified eigenfrequencies and eigenmodes. Nevertheless, when the TOM is applied to dynamic problems, the well-known grayscale or intermediate material problem arises which can invalidate the post-processing of the optimal result. Thus, a more natural way for solving dynamic problems using TOM is to allow intermediate material values. This idea leads to the functionally graded material (FGM) concept. In fact, FGMs are materials whose properties and microstructure continuously change along a specific direction. Therefore, in this paper, an approach is presented for tailoring user-defined vibration modes, by applying the TOM and FGM concepts to design functionally graded piezoelectric transducers (FGPT) and non-piezoelectric structures (functionally graded structures—FGS) in order to achieve maximum and/or minimum vibration amplitudes at certain points of the structure, by simultaneously finding the topology and material gradation function. The optimization problem is solved by using sequential linear programming. Two-dimensional results are presented to illustrate the method

  10. Age- and sex-tailored serum phosphate thresholds do not improve cardiovascular risk estimation in CKD.

    Science.gov (United States)

    Ferraro, Pietro Manuel; Bonello, Monica; Gambaro, Alessia; Sturniolo, Antonio; Gambaro, Giovanni

    2011-01-01

    Disordered metabolism of phosphorus is one of the hallmarks of chronic kidney disease (CKD), resulting in increased cardiovascular morbidity and mortality. Age and sex may affect the metabolism of phosphorus and subsequently its serum level. We evaluated if age- and sex-specific cutoffs for hyperphosphatemia may define cardiovascular risk better than the current guideline cutoffs. We used data from 16,834 subjects participating in the 1999-2006 National Health and Nutrition Examination Survey (NHANES); the prevalence of self-reported cardiovascular disease (CVD) and mortality rates were analyzed in CKD patients for both the classic definitions (CH; i.e., NKF-KDOQI and K-DIGO) and a tailored definition (TH) of hyperphosphatemia by means of regression models adjusted for age, sex, race/ethnicity, smoking status and body mass index. The cutoffs for TH were represented by the 95th percentile of an age- and sex-matched non-CKD population. Serum phosphorus levels showed an inverse correlation with age (r = -0.12; pdefinition and CVD was marginally better compared with the CH definition (odds ratio [OR] = 1.49, 95% confidence interval [95% CI], 1.04-2.13; p=0.030 vs. OR=1.55, 95% CI, 0.98-2.44; p = 0.059), the TH model was not superior in predicting CVD or mortality. Our data suggest that a tailored, age- and sex-specific definition of hyperphosphatemia is not superior to conventional definitions in predicting cardiovascular events in patients with CKD.

  11. Tailoring the visual communication of climate projections for local adaptation practitioners in Germany and the UK.

    Science.gov (United States)

    Lorenz, Susanne; Dessai, Suraje; Forster, Piers M; Paavola, Jouni

    2015-11-28

    Visualizations are widely used in the communication of climate projections. However, their effectiveness has rarely been assessed among their target audience. Given recent calls to increase the usability of climate information through the tailoring of climate projections, it is imperative to assess the effectiveness of different visualizations. This paper explores the complexities of tailoring through an online survey conducted with 162 local adaptation practitioners in Germany and the UK. The survey examined respondents' assessed and perceived comprehension (PC) of visual representations of climate projections as well as preferences for using different visualizations in communicating and planning for a changing climate. Comprehension and use are tested using four different graph formats, which are split into two pairs. Within each pair the information content is the same but is visualized differently. We show that even within a fairly homogeneous user group, such as local adaptation practitioners, there are clear differences in respondents' comprehension of and preference for visualizations. We do not find a consistent association between assessed comprehension and PC or use within the two pairs of visualizations that we analysed. There is, however, a clear link between PC and use of graph format. This suggests that respondents use what they think they understand the best, rather than what they actually understand the best. These findings highlight that audience-specific targeted communication may be more complex and challenging than previously recognized. © 2015 The Authors.

  12. STEP: Self-supporting tailored k-space estimation for parallel imaging reconstruction.

    Science.gov (United States)

    Zhou, Zechen; Wang, Jinnan; Balu, Niranjan; Li, Rui; Yuan, Chun

    2016-02-01

    A new subspace-based iterative reconstruction method, termed Self-supporting Tailored k-space Estimation for Parallel imaging reconstruction (STEP), is presented and evaluated in comparison to the existing autocalibrating method SPIRiT and calibrationless method SAKE. In STEP, two tailored schemes including k-space partition and basis selection are proposed to promote spatially variant signal subspace and incorporated into a self-supporting structured low rank model to enforce properties of locality, sparsity, and rank deficiency, which can be formulated into a constrained optimization problem and solved by an iterative algorithm. Simulated and in vivo datasets were used to investigate the performance of STEP in terms of overall image quality and detail structure preservation. The advantage of STEP on image quality is demonstrated by retrospectively undersampled multichannel Cartesian data with various patterns. Compared with SPIRiT and SAKE, STEP can provide more accurate reconstruction images with less residual aliasing artifacts and reduced noise amplification in simulation and in vivo experiments. In addition, STEP has the capability of combining compressed sensing with arbitrary sampling trajectory. Using k-space partition and basis selection can further improve the performance of parallel imaging reconstruction with or without calibration signals. © 2015 Wiley Periodicals, Inc.

  13. Air and ground resonance of helicopters with elastically tailored composite rotor blades

    Science.gov (United States)

    Smith, Edward C.; Chopra, Inderjit

    1993-01-01

    The aeromechanical stability, including air resonance in hover, air resonance in forward flight, and ground resonance, of a helicopter with elastically tailored composite rotor blades is investigated. Five soft-inplane hingeless rotor configurations, featuring elastic pitch-lag, pitch-flap and extension-torsion couplings, are analyzed. Elastic couplings introduced through tailored composite blade spars can have a powerful effect on both air and ground resonance behavior. Elastic pitch-flap couplings (positive and negative) strongly affect body, rotor and dynamic inflow modes. Air resonance stability is diminished by elastic pitch-flap couplings in hover and forwrad flight. Negative pitch-lag elastic coupling has a stabilizing effect on the regressive lag mode in hover and forward flight. The negative pitch-lag coupling has a detrimental effect on ground resonance stability. Extension-torsion elastic coupling (blade pitch decreases due to tension) decreases regressive lag mode stability in both airborne and ground contact conditions. Increasing thrust levels has a beneficial influence on ground resonance stability for rotors with pitch-flap and extension-torsion coupling and is only marginally effective in improving stability of rotors with pitch-lag coupling.

  14. Self-Healing Natural Rubber with Tailorable Mechanical Properties Based on Ionic Supramolecular Hybrid Network.

    Science.gov (United States)

    Xu, Chuanhui; Cao, Liming; Huang, Xunhui; Chen, Yukun; Lin, Baofeng; Fu, Lihua

    2017-08-30

    In most cases, the strength of self-healing supramolecular rubber based on noncovalent bonds is in the order of KPa, which is a challenge for their further applications. Incorporation of conventional fillers can effectively enhance the strength of rubbers, but usually accompanied by a sacrifice of self-healing capability due to that the filler system is independent of the reversible supramolecular network. In the present work, in situ reaction of methacrylic acid (MAA) and excess zinc oxide (ZnO) was realized in natural rubber (NR). Ionic cross-links in NR matrix were obtained by limiting the covalent cross-linking of NR molecules and allowing the in situ polymerization of MAA/ZnO. Because of the natural affinity between Zn 2+ ion-rich domains and ZnO, the residual nano ZnO participated in formation of a reversible ionic supramolecular hybrid network, thus having little obstructions on the reconstruction of ionic cross-links. Meanwhile, the well dispersed residual ZnO could tailor the mechanical properties of NR by changing the MAA/ZnO molar ratios. The present study thus provides a simple method to fabricate a new self-healing NR with tailorable mechanical properties that may have more potential applications.

  15. Control of core structure in MgB{sub 2} wire through tailoring boron powder

    Energy Technology Data Exchange (ETDEWEB)

    Maeda, Minoru, E-mail: maeda.minoru70@nihon-u.ac.jp [Department of Physics, College of Science and Technology, Nihon University, 1-8-14 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-8308 (Japan); Uchiyama, Daisuke [Department of Physics, College of Science and Technology, Nihon University, 1-8-14 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-8308 (Japan); Hossain, Md Shahriar Al; Ma, Zongqing [Institute for Superconducting and Electronic Materials, University of Wollongong, North Wollongong, New South Wales 2500 (Australia); Shahabuddin, Mohammed [Department of Physics and Astronomy, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia); Kim, Jung Ho, E-mail: jhk@uow.edu.au [Institute for Superconducting and Electronic Materials, University of Wollongong, North Wollongong, New South Wales 2500 (Australia)

    2015-07-05

    Highlights: • The typical void structure in the wire is obtained by using large-sized B powder. • In contrast, void alignment can be achieved by using fine B powder. • The sintering at lower temperatures improves the critical current density in fields. - Abstract: A common fabrication process for MgB{sub 2} wire, namely, the in situ powder-in-tube process, forms numerous voids within the wire core, and void formation cannot be completely avoided. The orientation is, however, known to be aligned more or less along the current-flow direction when ductile coarse magnesium powder is used as a precursor, and further tailoring approaches could open up the way to improving the transport critical current density. Herein, we have used boron powders with different particle sizes, in combination with the coarse magnesium powder, and evaluated their size effects on the phase composition, microstructure, and transport properties. A mixture of the coarse magnesium powder with large-sized boron powder in the wire core, after cold working and sintering, forms a granular morphology. In contrast, an aligned core appears during the reduction process for wire which is prepared by using fine boron powder. The sintering process, especially at a low temperature, where magnesium evaporation hardly occurs, yields an aligned structure, mainly consisting of MgB{sub 2} phase, along the wire direction. These findings demonstrate that the initial size of the starting materials is critical for the tailored structure.

  16. Improving physician-patient communication about cancer pain with a tailored education-coaching intervention.

    Science.gov (United States)

    Street, Richard L; Slee, Christina; Kalauokalani, Donna K; Dean, Dionne Evans; Tancredi, Daniel J; Kravitz, Richard L

    2010-07-01

    This study examined the effect of a theoretically grounded, tailored education-coaching intervention to help patients more effectively discuss their pain-related questions, concerns, and preferences with physicians. Grounded in social-cognitive and communication theory, a tailored education-coaching (TEC) intervention was developed to help patients learn pain management and communication skills. In a RCT, 148 cancer patients agreed to have their consultations audio-recorded and were assigned to the intervention or a control group. The recordings were used to code for patients' questions, acts of assertiveness, and expressed concerns and to rate the quality of physicians' communication. Patients in the TEC group discussed their pain concerns more than did patients in the control group. More active patients also had more baseline pain and interacted with physicians using participatory decision-making. Ratings of physicians' information about pain were higher when patients talked more about their pain concerns. The study demonstrates the efficacy of a theoretically grounded, coaching intervention to help cancer patients talk about pain control. Coaching interventions can be effective resources for helping cancer patients communicate about their pain concerns if they are theoretically grounded, can be integrated within clinical routines, and lead to improve health outcomes. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

  17. Understanding and Tailoring Grain Growth of Lead-Halide Perovskite for Solar Cell Application.

    Science.gov (United States)

    Ma, Yongchao; Liu, Yanliang; Shin, Insoo; Hwang, In-Wook; Jung, Yun Kyung; Jeong, Jung Hyun; Park, Sung Heum; Kim, Kwang Ho

    2017-10-04

    The fundamental mechanism of grain growth evolution in the fabrication process from the precursor phase to the perovskite phase is not fully understood despite its importance in achieving high-quality grains in organic-inorganic hybrid perovskites, which are strongly affected by processing parameters. In this work, we investigate the fundamental conversion mechanism from the precursor phase of perovskite to the complete perovskite phase and how the intermediate phase promotes growth of the perovskite grains during the fabrication process. By monitoring the morphological evolution of the perovskite during the film fabrication process, we observed a clear rod-shaped intermediate phase in the highly crystalline perovskite and investigated the role of the nanorod intermediate phase on the growth of the grains of the perovskite film. Furthermore, on the basis of these findings, we developed a simple and effective method to tailor grain properties including the crystallinity, size, and number of grain boundaries, and then utilized the film with the tailored grains to develop perovskite solar cells.

  18. Dynamic multi-coil tailored excitation for transmit B1 correction at 7 Tesla.

    Science.gov (United States)

    Umesh Rudrapatna, S; Juchem, Christoph; Nixon, Terence W; de Graaf, Robin A

    2016-07-01

    Tailored excitation (TEx) based on interspersing multiple radio frequency pulses with linear gradient and higher-order shim pulses can be used to obtain uniform flip angle in the presence of large radio frequency transmission (B 1+) inhomogeneity. Here, an implementation of dynamic, multislice tailored excitation using the recently developed multi-coil nonlinear shim hardware (MC-DTEx) is reported. MC-DTEx was developed and tested both in a phantom and in vivo at 7 T, and its efficacy was quantitatively assessed. Predicted outcomes of MC-DTEx and DTEx based on spherical harmonic shims (SH-DTEx) were also compared. For a planned 30 ° flip angle, in a phantom, the standard deviation in excitation improved from 28% (regular excitation) to 12% with MC-DTEx. The SD in in vivo excitation improved from 22 to 12%. The improvements achieved with experimental MC-DTEx closely matched the theoretical predictions. Simulations further showed that MC-DTEx outperforms SH-DTEx for both scenarios. Successful implementation of multislice MC-DTEx is presented and is shown to be capable of homogenizing excitation over more than twofold B 1+ variations. Its benefits over SH-DTEx are also demonstrated. A distinct advantage of MC hardware over SH shim hardware is the absence of significant eddy current effects, which allows for a straightforward, multislice implementation of MC-DTEx. Magn Reson Med 76:83-93, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  19. A highly attenuating and frequency tailorable annular hole phononic crystal for surface acoustic waves.

    Science.gov (United States)

    Ash, B J; Worsfold, S R; Vukusic, P; Nash, G R

    2017-08-02

    Surface acoustic wave (SAW) devices are widely used for signal processing, sensing and increasingly for lab-on-a-chip applications. Phononic crystals can control the propagation of SAW, analogous to photonic crystals, enabling components such as waveguides and cavities. Here we present an approach for the realisation of robust, tailorable SAW phononic crystals, based on annular holes patterned in a SAW substrate. Using simulations and experiments, we show that this geometry supports local resonances which create highly attenuating phononic bandgaps at frequencies with negligible coupling of SAWs into other modes, even for relatively shallow features. The enormous bandgap attenuation is up to an order-of-magnitude larger than that achieved with a pillar phononic crystal of the same size, enabling effective phononic crystals to be made up of smaller numbers of elements. This work transforms the ability to exploit phononic crystals for developing novel SAW device concepts, mirroring contemporary progress in photonic crystals.The control and manipulation of propagating sound waves on a surface has applications in on-chip signal processing and sensing. Here, Ash et al. deviate from standard designs and fabricate frequency tailorable phononic crystals with an order-of-magnitude increase in attenuation.

  20. Direct synthesis of antimicrobial coatings based on tailored bi-elemental nanoparticles

    Science.gov (United States)

    Benetti, Giulio; Cavaliere, Emanuele; Canteri, Adalberto; Landini, Giulia; Rossolini, Gian Maria; Pallecchi, Lucia; Chiodi, Mirco; Van Bael, Margriet J.; Winckelmans, Naomi; Bals, Sara; Gavioli, Luca

    2017-03-01

    Ultrathin coatings based on bi-elemental nanoparticles (NPs) are very promising to limit the surface-related spread of bacterial pathogens, particularly in nosocomial environments. However, tailoring the synthesis, composition, adhesion to substrate, and antimicrobial spectrum of the coating is an open challenge. Herein, we report on a radically new nanostructured coating, obtained by a one-step gas-phase deposition technique, and composed of bi-elemental Janus type Ag/Ti NPs. The NPs are characterized by a cluster-in-cluster mixing phase with metallic Ag nano-crystals embedded in amorphous TiO2 and present a promising antimicrobial activity including also multidrug resistant strains. We demonstrate the flexibility of the method to tune the embedded Ag nano-crystals dimension, the total relative composition of the coating, and the substrate type, opening the possibility of tailoring the dimension, composition, antimicrobial spectrum, and other physical/chemical properties of such multi-elemental systems. This work is expected to significantly spread the range of applications of NPs coatings, not only as an effective tool in the prevention of healthcare-associated infections but also in other technologically relevant fields like sensors or nano-/micro joining.