Making environmental assessments of biomass production systems comparable worldwide

International Nuclear Information System (INIS)

Meyer, Markus A; Seppelt, Ralf; Priess, Joerg A; Witing, Felix

2016-01-01

Global demand for agricultural and forestry products fundamentally affects regional land-use change associated with environmental impacts (EIs) such as erosion. In contrast to aggregated global metrics such as greenhouse gas (GHG) balances, local/regional EIs of different agricultural and forestry production regions need methods which enable worldwide EI comparisons. The key aspect is to control environmental heterogeneity to reveal man-made differences of EIs between production regions. Environmental heterogeneity is the variation in biotic and abiotic environmental conditions. In the present study, we used three approaches to control environmental heterogeneity: (i) environmental stratification, (ii) potential natural vegetation (PNV), and (iii) regional environmental thresholds to compare EIs of solid biomass production. We compared production regions of managed forests and plantation forests in subtropical (Satilla watershed, Southeastern US), tropical (Rufiji basin, Tanzania), and temperate (Mulde watershed, Central Germany) climates. All approaches supported the comparison of the EIs of different land-use classes between and within production regions. They also standardized the different EIs for a comparison between the EI categories. The EIs for different land-use classes within a production region decreased with increasing degree of naturalness (forest, plantation forestry, and cropland). PNV was the most reliable approach, but lacked feasibility and relevance. The PNV approach explicitly included most of the factors that drive environmental heterogeneity in contrast to the stratification and threshold approaches. The stratification approach allows consistent global application due to available data. Regional environmental thresholds only included arbitrarily selected aspects of environmental heterogeneity; they are only available for few EIs. Especially, the PNV and stratification approaches are options to compare regional EIs of biomass or crop production

Applying environmental product design to biomedical products research.

Science.gov (United States)

Messelbeck, J; Sutherland, L

2000-12-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

Effect of diverse ecological conditions on biomass production of ...

African Journals Online (AJOL)

Kangaroo grass native to Australia is known as the best grass to grow on different environmental and soil conditions. Biomass production of any grass is the key factor to estimate that if the grass could fulfill the animal requirements. Biomass production of kangaroo grass was estimated in this study at three growth stages on ...

Environmental Management in Product Chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Forman, Marianne

2009-01-01

between existing resources, norms and values and external pressures for environmental management (second section). A model for the types of corporate network relations that need to be mapped and understood in order to analyze and/or develop environmental management in a product chain (third section......The chapter aims at giving background to companies, consultants, governmental regulators, NGOs etc. for the analysis and planning of environmental management in specific product chains through: A framework for understanding environmental management in product chains as shaped by the interaction......). An overview of examples from our own research and from literature of the type and the role of environmental issues and initiatives in product chains (fourth section). A typology for characterizing corporate strategies as part of environmental management in product chains and characterizing those competencies...

Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

Science.gov (United States)

Kunz, Bethany K.; Little, Edward E.

2015-01-01

Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

The Deployment of Product-Related Environmental Legislation into Product Requirements

Directory of Open Access Journals (Sweden)

Daniela C. A. Pigosso

2016-04-01

Full Text Available Environmental legislation is increasingly changing its focus from manufacturing-oriented to product-oriented instruments. Compliance with product-related environmental legislation is achieved by the incorporation of environmental requirements into the early phases of the product development process (PDP. Nevertheless, the deployment of product-related environmental legislation into product requirements is still a challenge. This study followed an inductive approach to propose a guideline to support the identification, analysis and deployment of product requirements based on product-related environmental legislation. The guideline is composed of nine steps, clustered into three groups according to their main objective: (A identification of environmental product-related legislation; (B identification of legislative topics to be considered for the deployment of requirements; and (C creation and validation of product requirements. The product requirements deployed are to be considered during the PDP. The guideline was evaluated in an expert consultation in a large manufacturing company, suggesting that it can be used to support the systematization and deployment of product-related environmental requirements.

Environmental products

International Nuclear Information System (INIS)

1995-12-01

This volume in the series of directories of Quebec organizations doing research and development involving biomass-based products or processes focused on environmental products and services. The objective of this, and other directories in the series, was to stimulate interaction, and hence more aggressive development, of products and processes capable of being commercialized, to facilitate interaction between those who possess and those who could utilize biomass resources, and in general, to encourage the development of biomass-based industries. A total of 83 organizations were included in standardized format, describing areas of research interest, principal areas of technological expertise, major equipment, personnel and name and address of contact person. In this volume fields of research interest included environmental audits, waste treatment, biodegradation, composting, oxidation, photodegradation, disinfection and combustion. tabs

Environmental impacts of barley cultivation under current and future climatic conditions

DEFF Research Database (Denmark)

Dijkman, Teunis Johannes; Birkved, Morten; Saxe, Henrik

2017-01-01

for the increased impacts. This finding was confirmed by the sensitivity analysis. Because this study focused solely on the impacts of climate change, technological improvements and political measures to reduce impacts in the 2050 scenario are not taken into account. Options to mitigate the environmental impacts......The purpose of this work is to compare the environmental impacts of spring barley cultivation in Denmark under current (year 2010) and future (year 2050) climatic conditions. Therefore, a Life Cycle Assessment was carried out for the production of 1 kg of spring barley in Denmark, at farm gate....... Both under 2010 and 2050 climatic conditions, four subscenarios were modelled, based on a combination of two soil types and two climates. Included in the assessment were seed production, soil preparation, fertilization, pesticide application, and harvest. When processes in the life cycle resulted in co...

An environmental generalised Luenberger-Hicks-Moorsteen productivity indicator and an environmental generalised Hicks-Moorsteen productivity index.

Science.gov (United States)

Abad, A

2015-09-15

The purpose of this paper is to introduce an environmental generalised productivity indicator and its ratio-based counterpart. The innovative environmental generalised total factor productivity measures inherit the basic structure of both Hicks-Moorsteen productivity index and Luenberger-Hicks-Moorsteen productivity indicator. This methodological contribution shows that these new environmental generalised total factor productivity measures yield the earlier standard Hicks-Moorsteen index and Luenberger-Hicks-Moorsteen indicator, as well as environmental performance index, as special cases. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biodegradation of Perchlorate in Laboratory Reactors Under Different Environmental Conditions

Science.gov (United States)

2010-07-01

21 Figure 8. Initial and final mass of perchlorate, chloride, and chlorate ...is the soluble anion associated with the solid salts of ammonium, potassium , and sodium perchlorate. Large-scale production of ammonium perchlorate...ions. Most perchlorate-respiring microorganisms are capable of functioning under varying environmental conditions and use oxygen, nitrate, and chlorate

Environmental management in product chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Forman, Marianne; Hansen, Anne Grethe

of environmental initiatives, a number of recommendations for governmental regulation, which can support the further diffusion of environmental management in product chains, are developed. Furthermore, the report describes a number of theoretical perspectives from sociology of technology, organisation theory......This report presents the analyses of the shaping, implementation and embedding of eight types of environmental initiatives in product chains. The analyses focus on • the role of the type of product and branch, of the size of the companies and of governmental regulation • the focus...... of the environmental concerns and the reductions in environmental impact • organisational changes which have been part of the embedding of the initiatives The analyses are based on 25 cases from national and international product chains involving one or more Danish companies. Based on the analyses of the eight types...

Service oriented product innovation for improved environmental performance. An an exploratory case study of the air conditioning and cooling sector

Energy Technology Data Exchange (ETDEWEB)

Cook, M.; Maggs, H.; Neame, C.; Lemon, M. [The School of Applied Sciences, Cranfield University, Cranfield, Bedfordshire (United Kingdom)

2006-09-15

The need to improve the environmental performance of production and consumption practices within advanced industrialised nations is widely accepted. Finding ways to satisfy demand using far fewer resources is central to research in this field. For many, the trajectories of service orientated products are thought to provide an opportunity to address this need and anticipate futures in which economic growth is de-coupled from resource use. This paper presents the findings of exploratory research in the air-conditioning and cooling sector, which sought to understand how these benefits might be realised. It suggests that these benefits will not arise as a result of economic restructuring but rather that a deeper understanding of the process of service innovation, which underpins trajectories of service orientated products, is required to develop effective policy.

Affluence and objective environmental conditions: Evidence of differences in environmental concern in metropolitan Brazil.

Science.gov (United States)

Nawrotzki, Raphael J; Guedes, Gilvan; do Carmo, Roberto Luiz

2014-04-01

In an age of climate change, researchers need to form a deepened understanding of the determinants of environmental concern, particularly in countries of emerging economies. This paper provides a region-specific investigation of the impact of socio-economic status (SES) and objective environmental conditions on environmental concern in urban Brazil. We make use of data that were collected from personal interviews of individuals living in the metropolitan areas of Baixada Santista and Campinas, in the larger São Paulo area. Results from multilevel regression models indicate that wealthier households are more environmentally concerned, as suggested by affluence and post-materialist hypotheses. However, we also observe that increasing environmental concern correlates with a decline in objective environmental conditions. Interactions between objective environmental conditions and SES reveal some intriguing relationships: Among poorer individuals, a decline in environmental conditions increases environmental concern as suggested by the objective problems hypothesis, while for the wealthy, a decline in environmental conditions is associated with lower levels of environmental concern.

Analysis of federal and state policies and environmental issues for bioethanol production facilities.

Science.gov (United States)

McGee, Chandra; Chan Hilton, Amy B

2011-03-01

The purpose of this work was to investigate incentives and barriers to fuel ethanol production from biomass in the U.S. during the past decade (2000-2010). In particular, we examine the results of policies and economic conditions during this period by way of cellulosic ethanol activity in four selected states with the potential to produce different types of feedstocks (i.e., sugar, starch, and cellulosic crops) for ethanol production (Florida, California, Hawaii, and Iowa). Two of the four states, Iowa and California, currently have commercial ethanol production facilities in operation using corn feedstocks. While several companies have proposed commercial scale facilities in Florida and Hawaii, none are operating to date. Federal and state policies and incentives, potential for feedstock production and conversion to ethanol and associated potential environmental impacts, and environmental regulatory conditions among the states were investigated. Additionally, an analysis of proposed and operational ethanol production facilities provided evidence that a combination of these policies and incentives along with the ability to address environmental issues and regulatory environment and positive economic conditions all impact ethanol production. The 2000-2010 decade saw the rise of the promise of cellulosic ethanol. Federal and state policies were enacted to increase ethanol production. Since the initial push for development, expansion of cellulosic ethanol production has not happened as quickly as predicted. Government and private funding supported the development of ethanol production facilities, which peaked and then declined by the end of the decade. Although there are technical issues that remain to be solved to more efficiently convert cellulosic material to ethanol while reducing environmental impacts, the largest barriers to increasing ethanol production appear to be related to government policies, economics, and logistical issues. The numerous federal and state

Impact of Environmental Factors on the Regulation of Cyanotoxin Production

Science.gov (United States)

Boopathi, Thangavelu; Ki, Jang-Seu

2014-01-01

Cyanobacteria are capable of thriving in almost all environments. Recent changes in climatic conditions due to increased human activities favor the occurrence and severity of harmful cyanobacterial bloom all over the world. Knowledge of the regulation of cyanotoxins by the various environmental factors is essential for effective management of toxic cyanobacterial bloom. In recent years, progress in the field of molecular mechanisms involved in cyanotoxin production has paved the way for assessing the role of various factors on the cyanotoxin production. In this review, we present an overview of the influence of various environmental factors on the production of major group of cyanotoxins, including microcystins, nodularin, cylindrospermopsin, anatoxins and saxitoxins. PMID:24967641

Visualising the environmental appearance of audio products

Energy Technology Data Exchange (ETDEWEB)

Stilma, M. [Univ. of Twente, Enschede (Netherlands); Stevels, A. [Delft Univ. of Technology, Delft (Netherlands)]|[Philips Consumer Electronics, Eindhoven (Netherlands); Christiaans, H.; Kandachar, P. [Delft Univ. of Technology, Delft (Netherlands)

2004-07-01

Can environmental friendliness be communicated by the design style and appearance of products? (such as form, colour, style or material)? Consumers are interested in buying environmental products and design styles might be used as communicative tools. However, current 'green' products show something else. Environmental aspects are chiefly promoted by marketing programs based on technical items like the use of materials, hazardous substances, energy consumption, etc. By a qualitative and exploratory research the environmental design styles according to consumers' opinions were analysed with larger audio products as case study. Visible distinctive differences can be identified between the most and the least environmental rated products. A 'Green flagship', which claims to be environmentally orientated, wasn't recognised as such by consumers. And women and men perceive environmental friendliness in another way. From this research can be concluded that more attention is needed to visualise the good technical environmental performance of products. (orig.)

Floating on the margins [Environmental issues for floating production platforms

International Nuclear Information System (INIS)

Grimshaw, R.

1997-01-01

The main environmental issues challenging oilfield development using floating production platforms in harsh environments such as the Atlantic frontier are discussed. These fall into two broad categories -operating conditions and biological disturbance. Particular combinations of wind and currents can lead to extremely difficult operating conditions through which floating units are expected to maintain production for economic reasons. This imposes stringent conditions on the design and construction of tanker hulls and of risers to enable them to remain connected at all times. Prediction of wind and wave forces is a crucial element of operational and safety planning. Fauna in seabed sediments disturbed by pipeline laying often relocate but some seeding back of colonies may be required in hard rock areas. Migration routes for cetaceans and the feeding grounds of marine birds must be considered and the potential long and short term damage to commercial fisheries through discharges need to be assessed. A significant risk is the interaction of sub-sea facilities and fishing gear and oil spills. Operational and accidental discharges of production chemicals, produced water containing oil, deck drainage and treated sewage, and discharges to air from flaring and utility exhausts are of major environmental concern calling for mitigation and protection measures and contingency plans. Some of the environmental issues associated with decommissioning are reduced by the use of floating platforms but there are global and national regulations governing the process. (UK)

The contribution of fine roots to peatland stability under changing environmental conditions

Science.gov (United States)

Malhotra, A.; Brice, D. J.; Childs, J.; Phillips, J.; Hanson, P. J.; Iversen, C. M.

2017-12-01

Fine-root production and traits are closely linked with ecosystem nutrient and water fluxes, and may regulate these fluxes in response to environmental change. Plant strategies can shift to favoring below- over aboveground biomass allocation when nutrients or moisture are limited. Fine-roots traits such as root tissue density (RTD) or specific root length (SRL) can also adapt to the environment, for example, by maximizing the area of soil exploited by decreasing RTD and increasing SRL during dry conditions. Fine-root trait plasticity could contribute to the stability of peatland carbon function in response to environmental change. However, the extent and mechanisms of peatland fine-root plasticity are unknown. We investigated fine-root growth and traits and their link to environmental factors and aboveground dynamics at SPRUCE (Spruce and Peatland Responses Under Changing Environments), a warming and elevated CO2 (eCO2) experiment in an ombrotrophic peatland. In the first growing season of whole ecosystem warming, fine-root production increased with warming and drying. Above- versus belowground allocation strategies varied by plant functional type (PFT). In shrubs, contrary to our expectation, aboveground- to fine-root production allocation ratio increased with dryer conditions, perhaps as a response to a concurrent increase in nutrients. Trait response hypotheses were largely supported, with RTD decreasing and SRL increasing with warming; however, response varied among PFTs. Once eCO2 was turned on in the second growing season, preliminary results suggest interactive effects of warming and eCO2 on total fine-root production: production decreased or increased with warming in ambient or elevated CO2 plots, respectively. Both trait and production responses to warming and eCO2 varied by microtopography and depth. Our results highlight plasticity of fine-root traits and biomass allocation strategies; the extent and mechanism of which varies by PFT. We will summarize

Comparing the environmental impacts of ethyl biodiesel production from soybean oil and beef tallow through lca for brazilian conditions

Directory of Open Access Journals (Sweden)

Rafael Alves Esteves

2017-12-01

Full Text Available The present paper sought compare the environmental impacts throughout the life cycle of biodiesel production obtained from the two raw materials most used in Brazil (soybean oil and beef tallow through the process ethyl transesterification in an alkaline medium. The reference flow adopted for the work was the generation of power supplied 1GJ from the produced biodiesel. The data used in the inventory life cycle were calculated based on similar scientific papers. The method of assessment of environmental impacts chosen was the CML 2001 modified. Altogether, it were analyzed nine categories of environmental impacts for both processes (abiotic depletion (kg Sb eq, land use (m2a, global warming (kg CO2 eq, ozone layer depletion (kg CFC-11 eq, human toxicity (kg 1,4-DB eq, freshwater ecotoxicity (kg 1,4-DB eq, terrestrial ecotoxicity (kg 1,4-DB eq, acidification (kg SO2 eq and eutrophication (kg PO43- eq. The results of evaluation of environmental impacts show that the biodiesel production process from soybean oil presents major environmental damage in seven categories of analyzed impacts (destruction of abiotic resources, destruction of the ozone layer, human toxicity, freshwater ecotoxicity, terrestrial ecotoxicity, acidification and eutrophication. The production process of biodiesel from tallow presents major environmental damage in two categories of impacts analyzed (land use and global warming. However, the results show that the absolute values of environmental damage caused by impacts of the production process using beef tallow are much more aggressive.

Environmentally-friendly product development: methods and tools

National Research Council Canada - National Science Library

Abele, Eberhard; Anderl, R; Birkhofer, Herbert

2005-01-01

... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

Characterisation of non-aerosol-bound fractions of radon decay products under environmental conditions

International Nuclear Information System (INIS)

Pagelkopf, P.; Porstendoerfer, J.

2004-01-01

Dose-relevant factors such as the concentration and size distribution of radon decay products are strongly influenced by the charge-carrying fraction and state of charge of the first radon decay product, 2 18Po. The charge of 2 18Po influences its own mobility and hence its attachment to aerosols and deposition on surfaces, also referred to as ''plating out''. The mobility of 2 18Po can be described in terms of its diffusion coefficient. The goal of the present study was to determine theoretically as well as practically the charge-carrying fraction of radon decay products 2 18Po and 2 14Pb under room air conditions and to design and construct an electrical mobility spectrometer. The spatial model developed by Jacobi and modified by Porstendoerfer for calculating the concentration of unattached radon decay products in indoor and outdoor air under steady-state conditions was extended to permit a differentiated description of the charge-carrying and neutral unattached fractions of radon decay products 2 18Po and 2 14Pb. An 8 m 2 chamber permitting chamber air control in terms of radon gas concentration and humidity was built in order to study the behaviour of radon decay products. The charge-carrying fraction of unattached radon decay products 218 Po and 214 Pb was measured in this chamber. A technique referred to as the online backscreen technique (OBST) was developed to permit the continuous measurement of unattached decay products. The technique involves the diffusive deposition of unattached radon decay products from a laminar flow onto a wire lattice and their subsequent measurement. The total fraction of decay products is then determined by means of the filtration method. Furthermore, all parameters required for modelling such as radon gas, decay product and aerosol concentrations as well as air humidity, temperature and ion dose rate were measured [de

Environmental tools in product development

DEFF Research Database (Denmark)

Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

1994-01-01

A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

Assessment of the environmental impact of available options in electric power development under Polish conditions

International Nuclear Information System (INIS)

Cofala, Janusz; ); Jankowski, Boleslaw

1999-01-01

The current European initiatives limiting environmental impacts of energy production and use are presented and the proposal emission levels together with benefits are given. The role of nuclear power in achieving environmental targets in the EU countries is stressed. Then a comparison of the following 3 major electricity production options: modern coal fired power plants, gas fired combined cycle power plants and nuclear power plants is done. In the comparison Polish conditions are taken into account

A surplus production model including environmental effects: Application to the Senegalese white shrimp stocks

Science.gov (United States)

Thiaw, Modou; Gascuel, Didier; Jouffre, Didier; Thiaw, Omar Thiom

2009-12-01

In Senegal, two stocks of white shrimp ( Penaeusnotialis) are intensively exploited, one in the north and another in the south. We used surplus production models including environmental effects to analyse their changes in abundance over the past 10 years and to estimate their Maximum Sustainable Yield (MSY) and the related fishing effort ( EMSY). First, yearly abundance indices were estimated from commercial statistics using GLM techniques. Then, two environmental indices were alternatively tested in the model: the coastal upwelling intensity from wind speeds provided by the SeaWifs database and the primary production derived from satellite infrared images of chlorophyll a. Models were fitted, with or without the environmental effect, to the 1996-2005 time series. They express stock abundance and catches as functions of the fishing effort and the environmental index (when considered). For the northern stock, fishing effort and abundance fluctuate over the period without any clear trends. The model based on the upwelling index explains 64.9% of the year-to-year variability. It shows that the stock was slightly overexploited in 2002-2003 and is now close to full exploitation. Stock abundance strongly depends on environmental conditions; consequently, the MSY estimate varies from 300 to 900 tons according to the upwelling intensity. For the southern stock, fishing effort has strongly increased over the past 10 years, while abundance has been reduced 4-fold. The environment has a significant effect on abundance but only explains a small part of the year-to-year variability. The best fit is obtained using the primary production index ( R2 = 0.75), and the stock is now significantly overfished regardless of environmental conditions. MSY varies from 1200 to 1800 tons according to environmental conditions. Finally, in northern Senegal, the upwelling is highly variable from year to year and constitutes the major factor determining productivity. In the south, hydrodynamic

Production of environmentally friendly aerated concrete with required construction and operational properties

Directory of Open Access Journals (Sweden)

Tkach Evgeniya

2018-01-01

Full Text Available The purpose of these studies is to justify the feasibility of recycling different types of industrial waste instead of conventional expensive raw materials in production of environmentally friendly aerated concrete with required construction and operational properties. The impact of wastes from various industries on the environmental condition of affected areas, as well as the results of their environmental assessment were analyzed to determine whether these wastes could be used in production of high-performance building materials. The assessment of industrial wastes in aerated concrete production suggests that industrial wastes of hazard class IV can be recycled to produce aerated concrete. An environmentally friendly method for large-scale waste recycling, including a two-step environmentally sustainable mechanism, was developed. The basic quality indicators of the modified aerated concrete proved that the environmental safety could be enhanced by strengthening the structure, increasing its uniformity and improving thermal insulation properties. The modified non-autoclaved aerated concrete products with improved physical and operational properties were developed. They have the following properties: density – D700; class of concrete – B3.5; thermal transmittance coefficient – 0.143 W/(m·°C; frost resistance – F75.

Inherent health and environmental risk assessment of nanostructured metal oxide production processes.

Science.gov (United States)

Torabifard, Mina; Arjmandi, Reza; Rashidi, Alimorad; Nouri, Jafar; Mohammadfam, Iraj

2018-01-10

The health and environmental effects of chemical processes can be assessed during the initial stage of their production. In this paper, the Chemical Screening Tool for Exposure and Environmental Release (ChemSTEER) software was used to compare the health and environmental risks of spray pyrolysis and wet chemical techniques for the fabrication of nanostructured metal oxide on a semi-industrial scale with a capacity of 300 kg/day in Iran. The pollution sources identified in each production process were pairwise compared in Expert Choice software using indicators including respiratory damage, skin damage, and environmental damages including air, water, and soil pollution. The synthesis of nanostructured zinc oxide using the wet chemical technique (with 0.523 wt%) leads to lower health and environmental risks compared to when spray pyrolysis is used (with 0.477 wt%). The health and environmental risk assessment of nanomaterial production processes can help select safer processes, modify the operation conditions, and select or modify raw materials that can help eliminate the risks.

Environmental costs of meat production

DEFF Research Database (Denmark)

Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

2012-01-01

This paper aims to address two questions: First, what is the real cost of meat to society if taking into account the environmental costs arising throughout the product life cycle; and second, whether and how the environmental costs related to meat production can be reduced. In addressing the issues...... to be the main contributor to the costs (55%), followed by global warming (21%) and respiratory inorganics (18%). A viable option combining improvement measures in three aspects: feed use, manure management, and manure utilization, reduces the environmental costs by a factor of 1.4. This results in an equal size......, we use pig meat production in the EU as a case study. The environmental costs of meat are displayed first as characterized results at different midpoint categories e.g. global warming, nature occupation, acidification, eutrophication, ecotoxicity, etc., and then aggregated into a single score using...

Environmental Radon Gas and Degenerative Conditions An Overview

International Nuclear Information System (INIS)

Groves-Kirkby, C.J.; Denman, A.R.; Woolridge, A.C.; Phillips, P.S.; Phillips, C.

2006-01-01

Radon, a naturally occurring radioactive gas, has variable distribution in the environment as a decay product of uranium occurring in a wide range of rocks, soils and building materials. Although radon dissipates rapidly in outdoor air, it concentrates in the built environment, and inhalation of 222 Rn and its progeny 218 Po and 214 Po is believed to provide the majority of the radioactive dose to the respiratory system. While the connection between radon and lung cancer has long been recognised and investigated, recent studies have highlighted potential links between radon and other conditions, among them Multiple Sclerosis, Alzheimer and Parkinson Diseases, and Paget Disease of Bone. A strong case exists for clarifying the relationship between radon and these other conditions, not least since radon remediation to reduce lung cancer may conceivably have additional benefits hitherto unrecognized. The present status of the postulated links between environmental radon gas and degenerative conditions is reviewed, and recommendations for further research into levering current anti-radon campaigns are made. (authors)

Environmental aspects and renewable energy sources in the production of construction aggregate

Science.gov (United States)

Skrzypczak, Izabela; Kokoszka, Wanda; Buda-Ożóg, Lidia; Kogut, Janusz; Słowik, Marta

2017-11-01

The main activity of open pit mining of aggregates are aggregates' exploitation of natural mineral deposits and its modification in order to obtain high-quality aggregates. The development of aggregate production is conditioned by a number of factors. The most important are: documented material resources, mining and manufacturing capabilities, the need of environmental protection (environmental aspects), the subordination of the plan of spatial development, formal and legal issues, as well as economic and financial aspects. While identifying and assessing the environmental impacts of manufacturing aggregates one may distinguish those environmental aspects that have or may have the greatest magnitude of the impact on the environment as a result of industrial activities. Manufacturers producing aggregates located in the areas covered by the special environmental protection require extra diligence in the conduct of mining activities for preservation of natural resources. The article discusses some main environmental aspects of the production of construction aggregates on the example of one of the largest producers of this material in Subcarpathian province of Poland. Environmental protection in production of aggregates may refer to four aspects: the use of natural resources, having excluded land from agriculture and forestry, land reclamation after exploitation, and use of energy from renewable energy sources. The economic and environmental impact of production volume of aggregates is evaluated by the index information capacity method and the method of graphs.

The influence of local effects on thermal sensation under non-uniform environmental conditions — Gender differences in thermophysiology, thermal comfort and productivity during convective and radiant cooling

DEFF Research Database (Denmark)

Schellen, L.; Loomans, M.G.L.C.; de Wit, M.H.

2012-01-01

, thermal comfort and productivity in response to thermal non-uniform environmental conditions. Twenty healthy subjects (10 males and 10 females, age 20–29years) were exposed to two different experimental conditions: a convective cooling situation (CC) and a radiant cooling situation (RC). During...... the experiments physiological responses, thermal comfort and productivity were measured. The results show that under both experimental conditions the actual mean thermal sensation votes significantly differ from the PMV-index; the subjects are feeling colder than predicted. Furthermore, the females are more...... of the occupants. Non-uniform thermal conditions, which may occur due to application of high temperature cooling systems, can be responsible for discomfort. Contradictions in literature exist regarding the validity of the often used predicted mean vote (PMV) index for both genders, and the index is not intended...

Environmental impacts and sustainability of egg production systems.

Science.gov (United States)

Xin, H; Gates, R S; Green, A R; Mitloehner, F M; Moore, P A; Wathes, C M

2011-01-01

As part of a systemic assessment toward social sustainability of egg production, we have reviewed current knowledge about the environmental impacts of egg production systems and identified topics requiring further research. Currently, we know that 1) high-rise cage houses generally have poorer air quality and emit more ammonia than manure belt (MB) cage houses; 2) manure removal frequency in MB houses greatly affects ammonia emissions; 3) emissions from manure storage are largely affected by storage conditions, including ventilation rate, manure moisture content, air temperature, and stacking profile; 4) more baseline data on air emissions from high-rise and MB houses are being collected in the United States to complement earlier measurements; 5) noncage houses generally have poorer air quality (ammonia and dust levels) than cage houses; 6) noncage houses tend to be colder during cold weather due to a lower stocking density than caged houses, leading to greater feed and fuel energy use; 7) hens in noncage houses are less efficient in resource (feed, energy, and land) utilization, leading to a greater carbon footprint; 8) excessive application of hen manure to cropland can lead to nutrient runoff to water bodies; 9) hen manure on open (free) range may be subject to runoff during rainfall, although quantitative data are lacking; 10) mitigation technologies exist to reduce generation and emission of noxious gases and dust; however, work is needed to evaluate their economic feasibility and optimize design; and 11) dietary modification shows promise for mitigating emissions. Further research is needed on 1) indoor air quality, barn emissions, thermal conditions, and energy use in alternative hen housing systems (1-story floor, aviary, and enriched cage systems), along with conventional housing systems under different production conditions; 2) environmental footprint for different US egg production systems through life cycle assessment; 3) practical means to mitigate air

EPD--environmental product declarations for wood products : an application of life cycle information about forest products

Science.gov (United States)

Richard Bergman; Adam Taylor

2011-01-01

Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

Bio-fuels production and the environmental indicators

Energy Technology Data Exchange (ETDEWEB)

Gomes, Marcos Sebastiao de Paula [Mechanical Engineering Department/Pontifical Catholic University of Rio de Janeiro - PUC-Rio, Rua Marques de Sao Vicente 225, Gavea, CEP 22453-900, Rio de Janeiro, RJ (Brazil); Muylaert de Araujo, Maria Silvia [Energy and Environment Planning Program/Federal University of Rio de Janeiro - COPPE/UFRJ, Cidade Universitaria, Centro de Tecnologia, Bloco C, sala 211, Ilha do Fundao, CEP: 21945-970, Caixa Postal: 68501, Rio de Janeiro, RJ (Brazil)

2009-10-15

The paper evaluates the role of the bio-fuels production in the transportation sector in the world, for programs of greenhouse gases emissions reductions and sustainable environmental performance. Depending on the methodology used to account for the local pollutant emissions and the global greenhouse gases emissions during the production and consumption of both the fossil and bio-fuels, the results can show huge differences. If it is taken into account a life cycle inventory approach to compare the different fuel sources, these results can present controversies. A comparison study involving the American oil diesel and soybean diesel developed by the National Renewable Energy Laboratory presents CO{sub 2} emissions for the bio-diesel which are almost 20% of the emissions for the oil diesel: 136 g CO{sub 2}/bhp-h for the bio-diesel from soybean and 633 g CO{sub 2}/bhp-h for the oil diesel [National Renewable Energy Laboratory - NREL/SR-580-24089]. Besides that, important local environmental impacts can also make a big difference. The water consumption in the soybean production is much larger in comparison with the water consumption for the diesel production [National Renewable Energy Laboratory - NREL/SR-580-24089]. Brazil has an important role to play in this scenario because of its large experience in bio-fuels production since the seventies, and the country has conditions to produce bio-fuels for attending great part of the world demand in a sustainable pathway. (author)

Environmental conditions and primary production in a Sahelian ...

African Journals Online (AJOL)

Environmental descriptors (nutrient, water transparency, temperature ... Nutrient concentrations were low, with high variability (from 0 to 30 µg.l-1 for DIN and from 0 to 18 µg.l-1 for. PO4). The primary ... and permanent interventions of sea water.

PGE Production in Southern Africa, Part II: Environmental Aspects

Directory of Open Access Journals (Sweden)

Benedikt Buchspies

2017-11-01

Full Text Available Platinum group elements (PGEs, 6E PGE = Pt + Pd + Rh + Ru + Ir + Au are used in numerous applications that seek to reduce environmental impacts of mobility and energy generation. Consequently, the future demand for PGEs is predicted to increase. Previous studies indicate that environmental impacts of PGE production change over time emphasizing the need of up-to-date data and assessments. In this context, an analysis of environmental aspects of PGE production is needed to support the environmental assessment of technologies using PGEs, to reveal environmental hotspots within the production chain and to identify optimization potential. Therefore, this paper assesses greenhouse gas (GHG emissions, cumulative fossil energy demand (CEDfossil, sulfur dioxide (SO2 emissions and water use of primary PGE production in Southern Africa, where most of today’s supply originates from. The analysis shows that in 2015, emissions amounted to 45 t CO2-eq. and 502 kg SO2 per kg 6E PGE in the case GHG and SO2 emissions, respectively. GHG emissions are dominated by emissions from electricity provision contributing more than 90% to the overall GHG emissions. The CEDfossil amounted to 0.60 TJ per kg 6E PGE. A detailed analysis of the CEDfossil reveals that electricity provision based on coal power consumes the most fossil energy carriers among all energy forms. Results show that the emissions are directly related to the electricity demand. Thus, the reduction in the electricity demand presents the major lever to reduce the consumption of fossil energy resources and the emission of GHGs and SO2. In 2015, the water withdrawal amounted to 0.272 million L per kg 6E PGE. Additionally, 0.402 million L of recycled water were used per kg 6E PGE. All assessed indicators except ore grades and production volumes reveal increasing trends in the period from 2010 to 2015. It can be concluded that difficult market conditions (see part I of this paper series and increasing

Environmental Sustainability Analysis of Biodiesel Production

DEFF Research Database (Denmark)

Herrmann, Ivan Tengbjerg; Hauschild, Michael Michael Zwicky; Birkved, Morten

Due to their generally positive carbon dioxide balance, biofuels are seen as one of the energy carriers in a more sustainable future transportation energy system, but how good is their environmental sustainability, and where lie the main potentials for improvement of their sustainability? Questions...... like these require a life cycle perspective on the biofuel - from the cradle (production of the agricultural feedstock) to the grave (use as fuel). An environmental life cycle assessment is performed on biodiesel to compare different production schemes including chemical and enzymatic esterification...... with the use of methanol or ethanol. The life cycle assessment includes all processes needed for the production, distribution and use of the biodiesel (the product system), and it includes all relevant environmental impacts from the product system, ranging from global impacts like climate change and loss...

Environmental Management Initiatives in Product Chains

DEFF Research Database (Denmark)

Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

The Environmental Council for Cleaner Products in 2000-2001 initiated a collection of experience from the environmental co-operation in 25 product chains. This collection of experience was to elucidate the concrete co-operation between suppliers, enterprises and purchasers, to go through tools...... and to report on opportunities and barriers for environmental efforts in the entire product chain. This paper aims at giving a comprehensive analysis of the experiences, on the basis of the reporting of the 25 companies and their supply chains (reported by Ettrup and Bauer in 2002. The 25 case studies have been...

Using a Novel Wireless-Networked Decentralized Control Scheme under Unpredictable Environmental Conditions.

Science.gov (United States)

Chang, Chung-Liang; Huang, Yi-Ming; Hong, Guo-Fong

2015-11-12

The direction of sunshine or the installation sites of environmental control facilities in the greenhouse result in different temperature and humidity levels in the various zones of the greenhouse, and thus, the production quality of crop is inconsistent. This study proposed a wireless-networked decentralized fuzzy control scheme to regulate the environmental parameters of various culture zones within a greenhouse. The proposed scheme can create different environmental conditions for cultivating different crops in various zones and achieve diversification or standardization of crop production. A star-type wireless sensor network is utilized to communicate with each sensing node, actuator node, and control node in various zones within the greenhouse. The fuzzy rule-based inference system is used to regulate the environmental parameters for temperature and humidity based on real-time data of plant growth response provided by a growth stage selector. The growth stage selector defines the control ranges of temperature and humidity of the various culture zones according to the leaf area of the plant, the number of leaves, and the cumulative amount of light. The experimental results show that the proposed scheme is stable and robust and provides basis for future greenhouse applications.

Using a Novel Wireless-Networked Decentralized Control Scheme under Unpredictable Environmental Conditions

Directory of Open Access Journals (Sweden)

Chung-Liang Chang

2015-11-01

Full Text Available The direction of sunshine or the installation sites of environmental control facilities in the greenhouse result in different temperature and humidity levels in the various zones of the greenhouse, and thus, the production quality of crop is inconsistent. This study proposed a wireless-networked decentralized fuzzy control scheme to regulate the environmental parameters of various culture zones within a greenhouse. The proposed scheme can create different environmental conditions for cultivating different crops in various zones and achieve diversification or standardization of crop production. A star-type wireless sensor network is utilized to communicate with each sensing node, actuator node, and control node in various zones within the greenhouse. The fuzzy rule-based inference system is used to regulate the environmental parameters for temperature and humidity based on real-time data of plant growth response provided by a growth stage selector. The growth stage selector defines the control ranges of temperature and humidity of the various culture zones according to the leaf area of the plant, the number of leaves, and the cumulative amount of light. The experimental results show that the proposed scheme is stable and robust and provides basis for future greenhouse applications.

Evaluation of the Environmental Health Conditions of Qom Hotels & Inns

Directory of Open Access Journals (Sweden)

B. Farzinnia

2009-02-01

Full Text Available Background and ObjectivesTourism is one of the three major global industries with 4 percent annual economic growth. Qom with roughly 17 million tourists in 2005 was the second religious tourism center in Iran. This study was designed to determine the environmental health criteria of Qom hotels and inns in 2007.MethodsThis descriptive - cross sectional study was carried out based on a standard check list of substance of edible, drinkable, cosmetic and hygienic products law from ministry of health and medical sciences. The checklist included 73 questions which were completed by face to face interviews and sanitary inspections. After analyzing the results of each residential center, the questionnaires were classified into three categories: hygienic (over 80 score, sanitary (40-79 and unacceptable centers (less than 40. The data were presented and analyzed by descriptive and analytical statistical methods such as X 2 and Fisher exact test.ResultsThe percentages of hygienic, sanitary and unacceptable conditions of hotels and inns were 35.5, 54.8 and 9.7, respectively. There was a direct relationship between academic degree of residential managers and the validity of employees health card (P=0.042 ConclusionBased on this the research, the environmental status of Qom hotels and inns was in relatively desirable conditions. Residential places with unacceptable condition were almost located in the old region of the city (e.g. around the Holly Shrine. Due to the structural failures, architectural problems and tremendous cost for repairs, it’s better that their activities be stopped and banned by government. With regard to the high percentage of hotels with sanitary conditions, at least improvements in health conditions accompanied by training and supervision are recommended. Keywords: Environmental Health; Environment and Public Health; Hotel; Inn; Qom, Iran.

Environmental Radon Gas and Degenerative Conditions An Overview

Energy Technology Data Exchange (ETDEWEB)

Groves-Kirkby, C.J. [Medical Physics Department, Northampton General Hospital, Northampton NN1 5BD (United Kingdom)]|[School of Health, University of Northampton, Northampton NN2 7AL (United Kingdom); Denman, A.R. [Medical Physics Department, Northampton General Hospital, Northampton NN1 5BD (United Kingdom); Woolridge, A.C. [School of Health, University of Northampton, Northampton NN2 7AL (United Kingdom)]|[School of Applied Sciences, University of Northampton, Northampton NN2 7AL (United Kingdom); Phillips, P.S. [School of Applied Sciences, University of Northampton, Northampton NN2 7AL (United Kingdom); Phillips, C. [School of Health, University of Northampton, Northampton NN2 7AL (United Kingdom)

2006-07-01

Radon, a naturally occurring radioactive gas, has variable distribution in the environment as a decay product of uranium occurring in a wide range of rocks, soils and building materials. Although radon dissipates rapidly in outdoor air, it concentrates in the built environment, and inhalation of {sup 222}Rn and its progeny {sup 218}Po and {sup 214}Po is believed to provide the majority of the radioactive dose to the respiratory system. While the connection between radon and lung cancer has long been recognised and investigated, recent studies have highlighted potential links between radon and other conditions, among them Multiple Sclerosis, Alzheimer and Parkinson Diseases, and Paget Disease of Bone. A strong case exists for clarifying the relationship between radon and these other conditions, not least since radon remediation to reduce lung cancer may conceivably have additional benefits hitherto unrecognized. The present status of the postulated links between environmental radon gas and degenerative conditions is reviewed, and recommendations for further research into levering current anti-radon campaigns are made. (authors)

U02 pellets surface properties and environmental conditions effects on the wet adsorption

International Nuclear Information System (INIS)

Junqueira, Fabio da S.; Carnaval, Joao Paulo R.

2013-01-01

Angra power plants fuels are made bye en riche uranium dioxide (UO 2 ) pellets which are assembled inside metal tubes. These tubes are welded and arranged in order to perform the final product, the fuel assembly. The UO 2 pellets have a specified humidity tolerance designed to comply with security and performance requirements when working under operating conditions in the reactor. This work intends to verify the pellet opened porosity and the environmental conditions (relative humidity and temperature) influence on the wet adsorption by UO 2 pellet. The work was done in 2 parts: Firstly, pallets groups from 3 opened porosity levels were tested under a fixed relative humidity, temperature and time. In the second part of the work, the most critical pallet group upon wet adsorption was tested under different relative humidity and temperature conditions, regarding design of experiments. The opened porosity and environmental conditions tests allowed the evolution of the wet adsorption by the UO 2 pallet. (author)

Environmental assessment of two different crop systems in terms of biomethane potential production

International Nuclear Information System (INIS)

Bacenetti, Jacopo; Fusi, Alessandra; Negri, Marco; Guidetti, Riccardo; Fiala, Marco

2014-01-01

The interest in renewable energy sources has gained great importance in Europe due to the need to reduce fossil energy consumption and greenhouse gas emissions, as required by the Renewable Energy Directive (RED) of the European Parliament. The production of energy from energy crops appears to be consistent with RED. The environmental impact related to this kind of energy primarily originates from crop cultivation. This research aimed to evaluate the environmental impact of different crop systems for biomass production: single and double crop. The environmental performances of maize and maize plus wheat were assessed from a life cycle perspective. Two alternative scenarios considering different yields, crop management, and climatic conditions, were also addressed. One normal cubic metre of potential methane was chosen as a functional unit. Methane potential production data were obtained through lab experimental tests. For both of the crop systems, the factors that have the greatest influence on the overall environmental burden are: fertilizer emissions, diesel fuel emissions, diesel fuel production, and pesticide production. Notwithstanding the greater level of methane potential production, the double crop system appears to have the worse environmental performance with respect to its single crop counterpart. This result is due to the bigger quantity of inputs needed for the double crop system. Therefore, the greater amount of biomass (silage) obtained through the double crop system is less than proportional to the environmental burden that results from the bigger quantity of inputs requested for double crop. - Highlights: • Environmental impact of two crop systems was evaluated • Biomethane specific production tests were carried out • Alternative scenarios (different yields and crop management) were assessed • Maize single crop obtains the better environmental performance • Critical factors are: fertilizer and diesel fuel emissions and diesel fuel

Environmental assessment of two different crop systems in terms of biomethane potential production

Energy Technology Data Exchange (ETDEWEB)

Bacenetti, Jacopo; Fusi, Alessandra, E-mail: alessandra.fusi@unimi.it; Negri, Marco; Guidetti, Riccardo; Fiala, Marco

2014-01-01

The interest in renewable energy sources has gained great importance in Europe due to the need to reduce fossil energy consumption and greenhouse gas emissions, as required by the Renewable Energy Directive (RED) of the European Parliament. The production of energy from energy crops appears to be consistent with RED. The environmental impact related to this kind of energy primarily originates from crop cultivation. This research aimed to evaluate the environmental impact of different crop systems for biomass production: single and double crop. The environmental performances of maize and maize plus wheat were assessed from a life cycle perspective. Two alternative scenarios considering different yields, crop management, and climatic conditions, were also addressed. One normal cubic metre of potential methane was chosen as a functional unit. Methane potential production data were obtained through lab experimental tests. For both of the crop systems, the factors that have the greatest influence on the overall environmental burden are: fertilizer emissions, diesel fuel emissions, diesel fuel production, and pesticide production. Notwithstanding the greater level of methane potential production, the double crop system appears to have the worse environmental performance with respect to its single crop counterpart. This result is due to the bigger quantity of inputs needed for the double crop system. Therefore, the greater amount of biomass (silage) obtained through the double crop system is less than proportional to the environmental burden that results from the bigger quantity of inputs requested for double crop. - Highlights: • Environmental impact of two crop systems was evaluated • Biomethane specific production tests were carried out • Alternative scenarios (different yields and crop management) were assessed • Maize single crop obtains the better environmental performance • Critical factors are: fertilizer and diesel fuel emissions and diesel fuel

Evaluation of Environmental Health Indicators of Halva and Tahini Production Centers in Ardakan, Yazd

Directory of Open Access Journals (Sweden)

Mohammad Taghi Ghaneian

2014-03-01

Results: Generally, 75% production centers had favorable hygienic status and 25% had slightly favorable hygienic status. According to obtained results, hygienic status of production centers had relatively favorable and favorable conditions and only in January and February in 31.3% and 18.8% processing hall and 12.5% product store was in a very favorable hygienic status. The results showed that in terms of environmental health status, 62.5% production centers in raw materials store part, 66.66% in production processing hall, 20.83% in packaging hall, 60.41% in product store and 37.5% in bathrooms had favorable status. Based on the results, hygienic status of bathrooms and processing hall achieved lowest and highest score, respectively. Statistical analysis showed that between hygienic status and production rate (p=0.411 there is no significant relationship. Conclusion: The results of this study indicate that the halva and tahini production centers of Ardakan city in terms of environmental health indicators had slightly favorable status to favorable and none of the production centers had not very favorable conditions. The results of this study can be used to improve health status of halva and tahini production centers.

NPOESS Environmental Data Record (EDR) Production

Science.gov (United States)

Hughes, R.; Grant, K. D.

2009-12-01

The National Oceanic and Atmospheric Administration (NOAA), Department of Defense (DoD), and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation weather and environmental satellite system; the National Polar-orbiting Operational Environmental Satellite System (NPOESS). NPOESS replaces the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA and the Defense Meteorological Satellite Program (DMSP) managed by the DoD. The NPOESS satellites carry a suite of sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground data processing segment for NPOESS is the Interface Data Processing Segment (IDPS), developed by Raytheon Intelligence and Information Systems. The IDPS processes NPOESS satellite data to provide environmental data products (aka, Environmental Data Records or EDRs) to NOAA and DoD processing centers operated by the United States government. The IDPS will process EDRs beginning with the NPOESS Preparatory Project (NPP) and continuing through the lifetime of the NPOESS system. Northrop Grumman Aerospace Systems Algorithms and Data Products (A&DP) organization is responsible for the algorithms that produce the EDRs, including their quality aspects. Together, IDPS and A&DP must support the calibration, validation, and data quality improvement initiatives of the NPOESS program to ensure the production of atmospheric and environmental products that meet strict requirements for accuracy and precision. In support of this activity, A&DP and IDPS continually updates the estimated performance of the NPOESS system with respect to both latency and data quality, using the latest operational implementation of the data processing software and information from instrument test activities. This presentation will illustrate and describe the processing chains that create the data products, as well as describe the

Streamlining environmental product declarations: a stage model

Science.gov (United States)

Lefebvre, Elisabeth; Lefebvre, Louis A.; Talbot, Stephane; Le Hen, Gael

2001-02-01

General public environmental awareness and education is increasing, therefore stimulating the demand for reliable, objective and comparable information about products' environmental performances. The recently published standard series ISO 14040 and ISO 14025 are normalizing the preparation of Environmental Product Declarations (EPDs) containing comprehensive information relevant to a product's environmental impact during its life cycle. So far, only a few environmentally leading manufacturing organizations have experimented the preparation of EPDs (mostly from Europe), demonstrating its great potential as a marketing weapon. However the preparation of EPDs is a complex process, requiring collection and analysis of massive amounts of information coming from disparate sources (suppliers, sub-contractors, etc.). In a foreseeable future, the streamlining of the EPD preparation process will require product manufacturers to adapt their information systems (ERP, MES, SCADA) in order to make them capable of gathering, and transmitting the appropriate environmental information. It also requires strong functional integration all along the product supply chain in order to ensure that all the information is made available in a standardized and timely manner. The goal of the present paper is two fold: first to propose a transitional model towards green supply chain management and EPD preparation; second to identify key technologies and methodologies allowing to streamline the EPD process and subsequently the transition toward sustainable product development

Industrial activity, gas emissions and environmental urban management. Operative condition's diagnostic of smelting activities in Tandil, Argentina

International Nuclear Information System (INIS)

Soledad Sosa, Beatriz; Guerrero, Elsa Marcela; Banda Noriega, Roxana

2013-01-01

Amongst urban environmental problems, those associated to industry are of particular interest in environmental management. Tandil, a city in Argentina, owes its economic and urban growth to metalworking activity, especially to smelting. Despite the crisis in the sector, activity continues to be the axis of local economic and urban growth. The present research characterizes, in production, operative and environmental terms, local smelting industries and assesses operative conditions of gas emissions management during 2010. There were analyzed 25 industries over 30. The sample was representative of five productive processes: aluminum (Al), aluminum/iron (Al Fe), aluminum/bronze (Al Cu+Sn), aluminum/iron/bronze (Al Fe Cu+Sn), and iron (Fe). The variables analyzed were: primary fusion mater, oven used and industry size. To obtain production data we applied structured interviews, and for industry sizes we used surveys. It was possible to describe the productive prospect of the sector at a local level: for most industries the destination of their production is automotive sector. Taking into account the relation between the size and the type of industry, the aluminum smelting companies are small. Regarding iron industries, all three company sizes are present in the sample and exists a medium size industry that occupies between 51 and 230 employees. The operative conditions and their compliance with current legislation regarding control of gas emissions require to identify monitoring indicators for the melting stage that allow knowing precisely the resulting contaminants and their environmental effects.

Charcoal production and environmental degradation

International Nuclear Information System (INIS)

Hosier, R.H.

1993-01-01

This paper examines the environmental impacts of continued tree harvesting for charcoal production to supply the urban areas in Tanzania. Woodlands appear to recover relatively well following harvesting for charcoal production. Selective harvesting, where the high quality, low cost fuel production species and specimens are culled first from a piece of land, serves to maintain the viability of the woodlands resource while providing charcoal. This recovery period can be prolonged through any number of human induced activities, such as heavy grazing, multiple burns and extended cultivation periods. At the same time, post-harvest management techniques, such as coppice management, sprout protection and fertilization, can also improve the ability of woodlands to recover following harvesting. The environmental history of a given area determines why certain areas continue to be strong suppliers of woodfuel while others are not. For example, Shinyanga started from a low productivity base and has been degraded by successive waves of tree harvesting compounded by heavy grazing pressure. It is this multiple complex of pressures over a long period of time on land which is intrinsically of low productivity, and not the harvesting of woodlands for fuels, which has led to the environmental degradation in these areas. (author)

Dynamic photosynthesis in different environmental conditions.

Science.gov (United States)

Kaiser, Elias; Morales, Alejandro; Harbinson, Jeremy; Kromdijk, Johannes; Heuvelink, Ep; Marcelis, Leo F M

2015-05-01

Incident irradiance on plant leaves often fluctuates, causing dynamic photosynthesis. Whereas steady-state photosynthetic responses to environmental factors have been extensively studied, knowledge of dynamic modulation of photosynthesis remains scarce and scattered. This review addresses this discrepancy by summarizing available data and identifying the research questions necessary to advance our understanding of interactions between environmental factors and dynamic behaviour of photosynthesis using a mechanistic framework. Firstly, dynamic photosynthesis is separated into sub-processes related to proton and electron transport, non-photochemical quenching, control of metabolite flux through the Calvin cycle (activation states of Rubisco and RuBP regeneration, and post-illumination metabolite turnover), and control of CO₂ supply to Rubisco (stomatal and mesophyll conductance changes). Secondly, the modulation of dynamic photosynthesis and its sub-processes by environmental factors is described. Increases in ambient CO₂ concentration and temperature (up to ~35°C) enhance rates of photosynthetic induction and decrease its loss, facilitating more efficient dynamic photosynthesis. Depending on the sensitivity of stomatal conductance, dynamic photosynthesis may additionally be modulated by air humidity. Major knowledge gaps exist regarding environmental modulation of loss of photosynthetic induction, dynamic changes in mesophyll conductance, and the extent of limitations imposed by stomatal conductance for different species and environmental conditions. The study of mutants or genetic transformants for specific processes under various environmental conditions could provide significant progress in understanding the control of dynamic photosynthesis. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Environmental impacts of beef production: Review of challenges and perspectives for durability.

Science.gov (United States)

Gerber, Pierre J; Mottet, Anne; Opio, Carolyn I; Falcucci, Alessandra; Teillard, Félix

2015-11-01

Beef makes a substantial contribution to food security, providing protein, energy and also essential micro-nutrients to human populations. Rumination allows cattle - and other ruminant species - to digest fibrous feeds that cannot be directly consumed by humans and thus to make a net positive contribution to food balances. This contribution is of particular importance in marginal areas, where agro-ecological conditions and weak infrastructures do not offer much alternative. It is also valuable where cattle convert crop residues and by-products into edible products and where they contribute to soil fertility through their impact on nutrients and organic matter cycles. At the same time, environmental sustainability issues are acute. They chiefly relate to the low efficiency of beef cattle in converting natural resources into edible products. Water use, land use, biomass appropriation and greenhouse gas emissions are for example typically higher per unit of edible product in beef systems than in any other livestock systems, even when corrected for nutritional quality. This particularly causes environmental pressure when production systems are specialized towards the delivery of edible products, in large volumes. The paper discusses environmental challenges at global level, recognizing the large diversity of systems. Beef production is faced with a range of additional sustainability challenges, such as changing consumer perceptions, resilience to climate change, animal health and inequities in access to land and water resources. Entry-points for environmental sustainability improvement are discussed within this broader development context. Copyright © 2015. Published by Elsevier Ltd.

Environmental Management in Danish transnational textile product chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

2010-01-01

on capacity building at the suppliers in developing countries, while other companies seem to focus the complex activities at domestic suppliers. Two new facilitating actors in environmental management in product chains were identified. Research limitations and implications The focus on one sector in one......Purpose The purpose is to analyse environmental responsibility of companies from industrialized countries when they source materials and products in countries with less environmental protection. Methodology The article is a study of corporate environmental management in the Danish textile...... have a practice without environmental initiatives. Dominating types of initiatives are cleaner technology, environmental management systems and cleaner products. Driving forces are governmental regulation, customer demands, market expectations and protection of corporate brands. Some companies focus...

The impact of environmental conditions on human performance: A handbood of environmental exposures. Volume 1

International Nuclear Information System (INIS)

Echeverria, D.; Barnes, V.; Bittner, A.

1994-09-01

A comprehensive review of the technical literature was conducted regarding the impact of environmental conditions on hyman performance applicable to nuclear power plant workers. The environmental conditions considered were vibration, noise, heat, cold, and light. Research staff identified potential human performance deficits (e.g., decreased dexterity, impaired vision, hearing loss, memory deficiency) along a continuum of increasing occupational exposure, ranging from exposures that result in no deficit to exposures that resulted in significant performance problems. Specific deficits were included in the report if there was sound scientific evidence that environmental exposure resulted in those performance deficits. The levels associated with each deficit were then compared to the protection afforded by existing occupational exposure standards. Volume 1 is a handbook for use by NRC inspectors to help them determine the impact of specific environmental conditions on licensee personnel performance. it discusses the units used to measure each condition, discusses the effects of the condition on task performance, presents an example of the assessment of each condition in a nuclear power plant, and discusses potential methods for reducing the effects of

Environmental life cycle assessment of grain maize production: An analysis of factors causing variability.

Science.gov (United States)

Boone, Lieselot; Van Linden, Veerle; De Meester, Steven; Vandecasteele, Bart; Muylle, Hilde; Roldán-Ruiz, Isabel; Nemecek, Thomas; Dewulf, Jo

2016-05-15

To meet the growing demand, high yielding, but environmentally sustainable agricultural plant production systems are desired. Today, life cycle assessment (LCA) is increasingly used to assess the environmental impact of these agricultural systems. However, the impact results are very diverse due to management decisions or local natural conditions. The impact of grain maize is often generalized and an average is taken. Therefore, we studied variation in production systems. Four types of drivers for variability are distinguished: policy, farm management, year-to-year weather variation and innovation. For each driver, scenarios are elaborated using ReCiPe and CEENE (Cumulative Exergy Extraction from the Natural Environment) to assess the environmental footprint. Policy limits fertilisation levels in a soil-specific way. The resource consumption is lower for non-sandy soils than for sandy soils, but entails however more eutrophication. Farm management seems to have less influence on the environmental impact when considering the CEENE only. But farm management choices such as fertiliser type have a large effect on emission-related problems (e.g. eutrophication and acidification). In contrast, year-to-year weather variation results in large differences in the environmental footprint. The difference in impact results between favourable and poor environmental conditions amounts to 19% and 17% in terms of resources and emissions respectively, and irrigation clearly is an unfavourable environmental process. The best environmental performance is obtained by innovation as plant breeding results in a steadily increasing yield over 25 years. Finally, a comparison is made between grain maize production in Flanders and a generically applied dataset, based on Swiss practices. These very different results endorse the importance of using local data to conduct LCA of plant production systems. The results of this study show decision makers and farmers how they can improve the

product chain collaboration and environmental innovations

DEFF Research Database (Denmark)

Remmen, Arne; Mosgaard, Mette

2004-01-01

The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain.......The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain....

Environmental costs of fossil fuel energy production

International Nuclear Information System (INIS)

Riva, A.; Trebeschi, C.

1997-01-01

The costs of environmental impacts caused by fossil fuel energy production are external to the energy economy and normally they are not reflected in energy prices. To determine the environmental costs associated with an energy source a detailed analysis of all environmental impacts of the complete energy cycle is required. The economic evaluation of environmental damages is presented caused by atmospheric emissions produced by fossil fuel combustion for different uses. Considering the emission factors of sulphur oxides, nitrogen oxides, dust and carbon dioxide and the economic evaluation of their environmental damages reported in literature, a range of environmental costs associated with different fossil fuels and technologies is presented. A comparison of environmental costs resulting from atmospheric emissions produced by fossil-fuel combustion for energy production shows that natural gas has a significantly higher environmental value than other fossil fuels. (R.P.)

Life cycle impacts of ethanol production from spruce wood chips under high-gravity conditions.

Science.gov (United States)

Janssen, Matty; Xiros, Charilaos; Tillman, Anne-Marie

2016-01-01

Development of more sustainable biofuel production processes is ongoing, and technology to run these processes at a high dry matter content, also called high-gravity conditions, is one option. This paper presents the results of a life cycle assessment (LCA) of such a technology currently in development for the production of bio-ethanol from spruce wood chips. The cradle-to-gate LCA used lab results from a set of 30 experiments (or process configurations) in which the main process variable was the detoxification strategy applied to the pretreated feedstock material. The results of the assessment show that a process configuration, in which washing of the pretreated slurry is the detoxification strategy, leads to the lowest environmental impact of the process. Enzyme production and use are the main contributors to the environmental impact in all process configurations, and strategies to significantly reduce this contribution are enzyme recycling and on-site enzyme production. Furthermore, a strong linear correlation between the ethanol yield of a configuration and its environmental impact is demonstrated, and the selected environmental impacts show a very strong cross-correlation ([Formula: see text] in all cases) which may be used to reduce the number of impact categories considered from four to one (in this case, global warming potential). Lastly, a comparison with results of an LCA of ethanol production under high-gravity conditions using wheat straw shows that the environmental performance does not significantly differ when using spruce wood chips. For this comparison, it is shown that eutrophication potential also needs to be considered due to the fertilizer use in wheat cultivation. The LCA points out the environmental hotspots in the ethanol production process, and thus provides input to the further development of the high-gravity technology. Reducing the number of impact categories based only on cross-correlations should be done with caution. Knowledge of the

PRODUCTION, ECONOMIC AND ENVIRONMENTAL EFFECTS OF AGRICULTURAL BIOGAS PLANT IN KOSTKOWICE

Directory of Open Access Journals (Sweden)

Karol Węglarzy

2017-06-01

Full Text Available This paper presents the economic and ecological effect of Kostkowice Agricultural biogas plant based on a four year study carried out on the prototype installation. Agricultural biogas plant is part of the nature of the research conducted for twenty years at the National Research Institute of Animal PIB Experimental Station. Prof. Mieczyslaw Czaja relates to various aspects of environmental protection. It describes the economic justification for the production of energy from waste biomass (manure, slurry, wastes from feeding table, by the characteristics of substrates and products. It was found that agricultural biogas plant in rural areas are an important link in energy security, mainly due to the very high availability. Ecological effect is presented as effect of the installation solutions for the reduction of pollution of water, soil and air. Reducing greenhouse gas emissions through the recycling of environmentally harmful by-products of animal production of electricity and thermal energy, which is a substitute for environmentally harmful fossil fuels. The advantage of substances digestate is odorless, which is important both in an effort to improve the work culture in agriculture and improving living conditions in rural communities and it is an indisputable argument for the use of biomass for energy purposes.

Environmental conditions can modulate the links among oxidative stress, age, and longevity.

Science.gov (United States)

Marasco, Valeria; Stier, Antoine; Boner, Winnie; Griffiths, Kate; Heidinger, Britt; Monaghan, Pat

2017-06-01

Understanding the links between environmental conditions and longevity remains a major focus in biological research. We examined within-individual changes between early- and mid-adulthood in the circulating levels of four oxidative stress markers linked to ageing, using zebra finches (Taeniopygia guttata): a DNA damage product (8-hydroxy-2'-deoxyguanosine; 8-OHdG), protein carbonyls (PC), non-enzymatic antioxidant capacity (OXY), and superoxide dismutase activity (SOD). We further examined whether such within-individual changes differed among birds living under control (ad lib food) or more challenging environmental conditions (unpredictable food availability), having previously found that the latter increased corticosterone levels when food was absent but improved survival over a three year period. Our key findings were: (i) 8-OHdG and PC increased with age in both environments, with a higher increase in 8-OHdG in the challenging environment; (ii) SOD increased with age in the controls but not in the challenged birds, while the opposite was true for OXY; (iii) control birds with high levels of 8-OHdG died at a younger age, but this was not the case in challenged birds. Our data clearly show that while exposure to the potentially damaging effects of oxidative stress increases with age, environmental conditions can modulate the pace of this age-related change. Copyright © 2017 Elsevier B.V. All rights reserved.

Biodiesel production process optimization and characterization to assess the suitability of the product for varied environmental conditions

Energy Technology Data Exchange (ETDEWEB)

Eevera, T.; Rajendran, K.; Saradha, S. [Department of Biotechnology, Periyar Maniammai University, Periyar Nagar, Vallam, Thanjavur, Tamilnadu 613 403 (India)

2009-03-15

In this study, both edible (coconut oil, palm oil, groundnut oil, and rice bran oil) and non-edible oils (pongamia, neem and cotton seed oil) were used to optimize the biodiesel production process variables like catalyst concentration, amount of methanol required for reaction, reaction time and reaction temperature. The fuel properties like specific gravity, moisture content, refractive index, acid value, iodine number, saponification value and peroxide value were estimated. Based on the cetane number and iodine value, the methyl esters obtained from palm and coconut oils were not suitable to use as biodiesel in cold weather conditions, but for hot climate condition biodiesel obtained from the remaining oil sources is suitable. (author)

Cleaner production - a tool for sustainable environmental development

International Nuclear Information System (INIS)

Ahmad, I.; Batool, S.

2005-01-01

Industrial Development and Production with no regard for environmental impacts creates water and air pollution, soil degradation, and large-scale global impacts such as acid rain, global warming and ozone depletion. To create more sustainable methods of industrial production, there needs to be a shift in attitudes away from control towards pollution prevention and management. Cleaner Production (CP) refers to a management process that seeks out and eliminates the causes of pollution, waste generation and resource consumption at their source through input reductions or substitutions, pollution prevention, internal recycling and more efficient production technology and processes for sustainable environmental development. The objective of cleaner production is to avoid generating pollution in the first place, which frequently cuts costs, reduces risks associated with liability, and identifies new market opportunities. Introducing cleaner production has become a goal to improve the competitiveness through increased eco-efficiency. CP is a business strategy for enhancing productivity and environmental performance for overall socio-economic development. The environmental and economic benefits can only be achieved by implementing cleaner production tools. The CP assessment methodology is used to systematically identify and evaluate the waste minimization opportunities and facilitate their implementation in industries. It refers to how goods and services are produced with the minimum environmental impact under present technological and economic limits. CP shares characteristics with many environmental management tools such as Environmental Assessment or Design for Environment by including them among the technological options for reducing material and energy intensiveness in production, as well as facilitating ruse trough remanufacturing and recycling. It is thus an extension of the total quality management process. The CP program has been successfully implemented in

Plant community, primary productivity, and environmental conditions following wetland re-establishment in the Sacramento-San Joaquin Delta, California

Science.gov (United States)

Miller, R.L.; Fujii, R.

2010-01-01

Wetland restoration can mitigate aerobic decomposition of subsided organic soils, as well as re-establish conditions favorable for carbon storage. Rates of carbon storage result from the balance of inputs and losses, both of which are affected by wetland hydrology. We followed the effect of water depth (25 and 55 cm) on the plant community, primary production, and changes in two re-established wetlands in the Sacramento San-Joaquin River Delta, California for 9 years after flooding to determine how relatively small differences in water depth affect carbon storage rates over time. To estimate annual carbon inputs, plant species cover, standing above- and below-ground plant biomass, and annual biomass turnover rates were measured, and allometric biomass models for Schoenoplectus (Scirpus) acutus and Typha spp., the emergent marsh dominants, were developed. As the wetlands developed, environmental factors, including water temperature, depth, and pH were measured. Emergent marsh vegetation colonized the shallow wetland more rapidly than the deeper wetland. This is important to potential carbon storage because emergent marsh vegetation is more productive, and less labile, than submerged and floating vegetation. Primary production of emergent marsh vegetation ranged from 1.3 to 3.2 kg of carbon per square meter annually; and, mid-season standing live biomass represented about half of the annual primary production. Changes in species composition occurred in both submerged and emergent plant communities as the wetlands matured. Water depth, temperature, and pH were lower in areas with emergent marsh vegetation compared to submerged vegetation, all of which, in turn, can affect carbon cycling and storage rates. ?? Springer Science+Business Media B.V. 2009.

Environmental pressures from European consumption and production. A study in integrated environmental and economic analysis

Energy Technology Data Exchange (ETDEWEB)

Watson, D. [Copenhagen Resource Institute, Copenhagen (Denmark); Fernandez, J.A.; Wittmer, D. [Wuppertal Institute, Wuppertal (Germany); Gravgaerd Pedersen, O. [Statistics Denmark, Copenhagen (Denmark); European Topic Centre on Sustainable Consumption and Production, Copenhagen (Denmark)

2013-03-15

Environmental pressures from European consumption and production shows how economic and environmental data can be integrated to analyse environmental performance and material efficiency of whole economies as well as their individual elements. The analyses presented in the report provide policy makers with a tool to target economic incentives and information campaigns, encouraging a shift to more sustainable production and consumption patterns in order to reduce Europe's global footprint. The report discusses two analytical approaches. The production-based method considers direct environmental pressures caused by European industries and service providers - for example, the extraction of material resources by the mining and quarrying sector, air pollutants from power stations, greenhouse gas emissions from agriculture and so on. The consumption-based method focuses on the indirect environmental pressures caused by European consumers. In this approach, the direct production-related pressures are attributed to broad groups of products and services, also taking into account pressures that are embodied in goods imported into the EU. Using Environmentally Extended Input Output Analysis (EE-IOA) it is possible to estimate the environmental pressures ultimately generated by individual product groups and also by European consumption as a whole. Four types of environmental pressures are considered by the report: raw material use, greenhouse gas emissions, acidifying air emissions, and air pollutants leading to harmful ground-level ozone. However, the method has the potential to assess many other types of environmental pressure including land use, water use, waste generation and energy use. Thanks to the conceptual consistency between the system of national economic accounts and environmental accounts, data on environmental pressures is directly comparable to economic expenditure. Policy makers can thus see which sectors have been most successful in decoupling

Local Productive Arrangements for Biodiesel Production in Brazil – Environmental Assessment of Small-holder’s Integrated Oleaginous Crops Management

Directory of Open Access Journals (Sweden)

Geraldo Stachetti Rodrigues

2009-04-01

Full Text Available Sustainability assessments were carried out in small-holders’ farms in four territories where productive arrangements have been organized for production of minor oleaginous crops under the Brazilian biodiesel program. The study aimed at checking local impacts of the biodiesel productive chains at the rural establishment scale, and promoting the environmental performance of the selected farms, henceforth proposed as sustainable management demonstration units. Assessments were carried out with the APOIA-NovoRural system, which integrates 62 objective and quantitative indicators related to five sustainability dimensions: i Landscape Ecology, ii Environmental Quality (Atmosphere, Water and Soil, iii Socio-cultural Values, iv Economic Values and v Management and Administration. The main results point out that, in general, the ecological dimensions of sustainability, that is, the Landscape Ecology and Atmosphere, Water, and Soil quality indicators, show adequate field conditions, seemingly not yet negatively affected by increases in chemical inputs and natural resources use predicted as important potential impacts of the agro-energy sector. The Economic Values indicators have been favorably influenced in the studied farms, due to a steadier demand and improved prices for the oleaginous crops. On the other hand, valuable positive consequences expected for favoring farmers’ market insertion, such as improved Socio-cultural Values and Management & Administration indicators, are still opportunities to be materialized. The Environmental Management Reports issued to the farmers, based on the presented sustainability assessment procedures, offer valuable documentation and communication means for consolidating the organizational influence of the local productive arrangements studied. These productive arrangements were shown to be determinant for the selection of crop associations and diversification, as well as for the provision of technical assistance

Environmental innovations in the product chain

DEFF Research Database (Denmark)

Remmen, Arne; Holgaard, Jette Egelund

2004-01-01

The article gives an overview of different positions within innovation and network theory, and highlights how enterprises within the organic dairy industry and fish processing industry have made environmental innovations related to their processes and products.......The article gives an overview of different positions within innovation and network theory, and highlights how enterprises within the organic dairy industry and fish processing industry have made environmental innovations related to their processes and products....

'Underutilised' agricultural land: its definitions, potential use for future biomass production and its environmental implications

Science.gov (United States)

Miyake, Saori; Bargiel, Damian

2017-04-01

A growing bioeconomy and increased demand for biomass products on food, health, fibre, industrial products and energy require land resources for feedstock production. It has resulted in significant environmental and socio-economic challenges on a global scale. As a result, consideration of such effects of land use change (LUC) from biomass production (particularly for biofuel feedstock) has emerged as an important area of policy and research, and several potential solutions have been proposed to minimise such adverse LUC effects. One of these solutions is the use of lands that are not in production or not suitable for food crop production, such as 'marginal', 'degraded', 'abandoned' and 'surplus' agricultural lands for future biomass production. The terms referring to these lands are usually associated with the potential production of 'marginal crops', which can grow in marginal conditions (e.g. poor soil fertility, low rainfall, drought) without much water and agrochemical inputs. In our research, we referred to these lands as 'underutilised' agricultural land and attempted to define them for our case study areas located in Australia and Central and Eastern Europe (CEE). Our goal is to identify lands that can be used for future biomass production and to evaluate their environmental implications, particularly impacts related to biodiversity, water and soil at a landscape scale. The identification of these lands incorporates remote sensing and spatially explicit approaches. Our findings confirmed that there was no universal or single definition of the term 'underutilised' agricultural land as the definitions significantly vary by country and region depending not only on the biophysical environment but also political, institutional and socio-economic conditions. Moreover, our results highlighted that the environmental implications of production of biomass on 'underutilised' agricultural land for biomass production are highly controversial. Thus land use change

Environmental consequences of energy production: Proceedings

Energy Technology Data Exchange (ETDEWEB)

none,

1989-01-01

The Seventeenth Annual Illinois Energy conference entitled Environmental consequences of Energy Production was held in Chicago, Illinois on October 19-20, 1989. The purpose of the meeting was to provide a forum for exchange of information on the technical, economic and institutional issues surrounding energy production and related environmental problems. The conference program was developed by a planning committee which included Illinois energy and environmental specialists from the major sectors including energy industries, environmental organizations, research universities, utility companies, federal, state and local government agencies, and public interest groups. The conference included presentations on four major topic areas. The issue areas were: urban pollution: where are we now and what needs to be done in the future; the acid rain problem: implications of proposed federal legislation on the Midwest; global warming: an update on the scientific debate; and strategies to minimize environmental damage. Separate abstracts have been prepared for the individual presentations. (FL)

Influence of environmental conditions on the toxicokinetics of cadmium in the marine copepod Acartia tonsa

NARCIS (Netherlands)

Pavlaki, Maria D.; Morgado, Rui G.; van Gestel, Cornelis A.M.; Calado, Ricardo; Soares, Amadeu M.V.M.; Loureiro, Susana

2017-01-01

mMarine and estuarine ecosystems are highly productive areas that often act as a final sink for several pollutants, such as cadmium. Environmental conditions in these habitats can affect metal speciation, as well as its uptake and depuration by living organisms. The aim of this study was to assess

Product-oriented environmental management. A study of capability building, stakeholder orientation and continuous improvement regarding products' environmental characteristics in firms

NARCIS (Netherlands)

de Bakker, F.G.A.

2001-01-01

Companies are increasingly giving attention to the environmental characteristics of their products. This book focuses on the ways in which large, proactive, firms could develop and maintain product-oriented environmental management (POEM), both at the strategic and the operational level. POEM is

Environmental, health and economic conditions perceived by 50 rural communities in Bangladesh.

Science.gov (United States)

Ohtsuka, Ryutaro; Inaoka, Tsukasa; Moji, Kazuhiko; Karim, Enamul; Yoshinaga, Mari

2002-12-01

For randomly selected 50 villages in Bangladesh, an interview survey with a structured questionnaire was conducted to reveal their perception on the environmental, health and economic conditions at present and for the past 10-year change. The eight following items were analyzed in this paper: air pollution and water pollution, which represent environmental conditions with close relation to health conditions, soil degradation and deforestation, which represent environmental conditions with close relation to economic conditions, epidemic diseases and malnutrition, which represent health conditions, and poverty and jobless, which represent economic conditions. Among the 50 villages, deforestation was most frequently perceived serious at present and worsened in the past 10 years. Of the remaining seven items, those related to economic conditions were more seriously perceived than those related to health and environmental conditions. As revealed by the cluster analysis for the inter-item relations, epidemic diseases, which formed the same cluster with the environmental items, were recognized less serious whereas malnutrition, which formed the same cluster with the economic items, was recognized more serious. These findings are useful not only for rural development programs but also for mitigation programs toward health and environmental hazards in Bangladesh.

A multivariate approach for the study of the environmental drivers of wine production structure

Science.gov (United States)

Lorenzetti, Romina; Costantini, Edoardo A. C.; Malorgio, Giulio

2015-04-01

non-parametric Spearman test; ii) a cluster analysis to group the Macro-areas in few homogeneous economic structures; iii) a discriminant analysis of economic clusters and environmental factors, to highlight the environmental drivers of the different wine production structures. The cluster analysis identified six systems of production and organization. Climatic, pedoclimatic, morphological mean conditions and morphological heterogeneity of Macro-areas had the most important discriminant power over the clusters. The economic structures addressed to large-scale kind of production and those with a not clear orientation were located in low hills and plains with Mediterranean climatic conditions. Lands at higher elevation and rougher morphology correlated with high quality products and structures, either made of little independent farms or cooperatives, in the highest cold wet areas, or large independent farms, on medium hill. In conclusion, for the first time it was proved that certain landscape characteristics have a significant influence over the typology of wine production structure. The result of this multivariate analyses suggest that pedo-climatic characteristics and landscape attributes care can have a strategic role on the wine industry.

NPOESS Preparatory Project (NPP) Environmental Products

Science.gov (United States)

Grant, K. D.; Smith, D. C.

2011-12-01

The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will contribute the afternoon orbit component and ground processing system of the restructured National Polar-orbiting Operational Environmental Satellite System (NPOESS). As such, the Joint Polar Satellite System replaces the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA and the ground processing component of both POES and the Defense Meteorological Satellite Program (DMSP) replacement, known as the Defense Weather Satellite System (DWSS), managed by the Department of Defense (DoD). The Joint Polar Satellite System satellite will carry a suite of sensors designed to collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for the Joint Polar Satellite System is known as the Common Ground System (JPSS CGS), and consists of a Command, Control, and Communications Segment (C3S) and the Interface Data Processing Segment (IDPS). Both are developed by Raytheon Intelligence and Information Systems (IIS). The Interface Data Processing Segment will process Joint Polar Satellite System and Defense Weather Satellite System satellite data to provide environmental data products (aka, Environmental Data Records or EDRs) to the National Oceanic and Atmospheric Administration and Department of Defense processing centers operated by the United States government. The Interface Data Processing Segment will process Environmental Data Records beginning with the NPOESS Preparatory Project (NPP) and continue through the lifetime of the Joint Polar Satellite System and Defense Weather Satellite System programs. Under the National Polar-orbiting Operational Environmental

Environmental impacts of irrigated and rain-fed barley production in Iran using life cycle assessment (LCA)

Energy Technology Data Exchange (ETDEWEB)

Houshyar, E.

2017-07-01

Current intensive grain crops production is often associated with environmental burdens. However, very few studies deal with the environmental performance of both current and alternative systems of barley production. This study was undertaken to evaluate energy consumption and environmental impacts of irrigated and rain-fed barley production. Additionally, three alternative scenarios were examined for irrigated barley fields including conservation tillage and biomass utilization policies. The findings showed that around 25 GJ/ha energy is needed in order to produce 2300 kg/ha irrigated barley and 13 GJ/ha for 1100 kg/ha rain-fed barley. Life cycle assessment (LCA) results indicated that irrigated farms had more environmental impacts than rain-fed farms. Electricity generation and consumption had the highest effect on the abiotic depletion potential, human toxicity potential, freshwater and marine aquatic ecotoxicity potential. However, alternative scenarios revealed that using soil conservation tillage systems and biomass consumption vs. gas for electricity generation at power plants can significantly mitigate environmental impacts of irrigated barley production similar to the rain-fed conditions while higher yield is obtained.

Environmental impacts of irrigated and rain-fed barley production in Iran using life cycle assessment (LCA)

International Nuclear Information System (INIS)

Houshyar, E.

2017-01-01

Current intensive grain crops production is often associated with environmental burdens. However, very few studies deal with the environmental performance of both current and alternative systems of barley production. This study was undertaken to evaluate energy consumption and environmental impacts of irrigated and rain-fed barley production. Additionally, three alternative scenarios were examined for irrigated barley fields including conservation tillage and biomass utilization policies. The findings showed that around 25 GJ/ha energy is needed in order to produce 2300 kg/ha irrigated barley and 13 GJ/ha for 1100 kg/ha rain-fed barley. Life cycle assessment (LCA) results indicated that irrigated farms had more environmental impacts than rain-fed farms. Electricity generation and consumption had the highest effect on the abiotic depletion potential, human toxicity potential, freshwater and marine aquatic ecotoxicity potential. However, alternative scenarios revealed that using soil conservation tillage systems and biomass consumption vs. gas for electricity generation at power plants can significantly mitigate environmental impacts of irrigated barley production similar to the rain-fed conditions while higher yield is obtained.

Influence of high gravity process conditions on the environmental impact of ethanol production from wheat straw

DEFF Research Database (Denmark)

Janssen, Matty; Tillman, Anne-Marie; Cannella, David

2014-01-01

Biofuel production processes at high gravity are currently under development. Most of these processes however use sugars or first generation feedstocks as substrate. This paper presents the results of a life cycle assessment (LCA) of the production of bio-ethanol at high gravity conditions from...... of the ethanol production, but this can be compensated by reducing the impact of enzyme production and use, and by polyethylene glycol addition at high dry matter content. The results also show that the renewable and non-renewable energy use resulting from the different process configurations ultimately...

Environmental factors and habitat use influence body condition of individuals in a species at risk, the grizzly bear.

Science.gov (United States)

Bourbonnais, Mathieu L; Nelson, Trisalyn A; Cattet, Marc R L; Darimont, Chris T; Stenhouse, Gordon B; Janz, David M

2014-01-01

Metrics used to quantify the condition or physiological states of individuals provide proactive mechanisms for understanding population dynamics in the context of environmental factors. Our study examined how anthropogenic disturbance, habitat characteristics and hair cortisol concentrations interpreted as a sex-specific indicator of potential habitat net-energy demand affect the body condition of grizzly bears (n = 163) in a threatened population in Alberta, Canada. We quantified environmental variables by modelling spatial patterns of individual habitat use based on global positioning system telemetry data. After controlling for gender, age and capture effects, we assessed the influence of biological and environmental variables on body condition using linear mixed-effects models in an information theoretical approach. Our strongest model suggested that body condition was improved when patterns of habitat use included greater vegetation productivity, increased influence of forest harvest blocks and oil and gas well sites, and a higher percentage of regenerating and coniferous forest. However, body condition was negatively affected by habitat use in close proximity to roads and in areas where potential energetic demands were high. Poor body condition was also associated with increased selection of parks and protected areas and greater seasonal vegetation productivity. Adult females, females with cubs-of-year, juvenile females and juvenile males were in poorer body condition compared with adult males, suggesting that intra-specific competition and differences in habitat use based on gender and age may influence body condition dynamics. Habitat net-energy demand also tended to be higher in areas used by females which, combined with observed trends in body condition, could affect reproductive success in this threatened population. Our results highlight the importance of considering spatiotemporal variability in environmental factors and habitat use when assessing

Green electronics manufacturing creating environmental sensible products

CERN Document Server

Wang, John X

2012-01-01

Going ""green"" is becoming a major component of the mission for electronics manufacturers worldwide. While this goal seems simplistic, it poses daunting dilemmas. Yet, to compete effectively in the global economy, manufacturers must take the initiative to drive this crucial movement. Green Electronics Manufacturing: Creating Environmental Sensible Products provides you with a complete reference to design, develop, build, and install an electronic product with special consideration for the product's environmental impacts during its whole life cycle. The author discusses how to integrate the st

ENVIRONMENTAL SAFETY OF LIVESTOCK PRODUCTS IN THE ECONOMIC AND GEOGRAPHIC AREAS OF THE AZERBAIJAN PART OF THE GREATER CAUCASUS

Directory of Open Access Journals (Sweden)

F. M. Jafarova

2016-01-01

Full Text Available Aim. The aim is to study the political, economic and environmental aspects of food security, which is an important component of national security; to study the issues of the use of environmentally friendly agricultural products, as well as the environmental safety of livestock products.Methods. Determination of the dynamics of livestock production on the basis of the comparative statistical analysis, the study of animal breeding territorial organization through a systematic approach.Results. The region has favorable conditions for the production of ecologically clean agricultural products, using environmentally friendly feed. We should develop manufacturing industries to meet international standards and provide the population with healthy food.Conclusion. We revealed the ecological safety of livestock products in the economic and geographic regions of the Azerbaijan part of the Greater Caucasus.

Environmental sustainability assessment of palm biodiesel production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2012-01-01

The study assesses the environmental sustainability of palm biodiesel production systems in Thailand by focusing on their energy efficiency and environmental impact potentials. The Net Energy Balance (NEB) and Renewability indicate energy gain for palm biodiesel and its co-products as compared to fossil energy inputs. In addition, life cycle assessment also reveals lower values of environmental impact potentials of biodiesel as compared to conventional diesel. For example, palm biodiesel can provide greenhouse gas (GHG) reduction of around 46–73% as compared to diesel. Nitrogen-fertilizer production and application in the plantation and the air emissions from the ponds treating palm oil mill effluent (POME) are found to be the major environmental aspects. However, the energy and environmental performances depend on various factors such as the management efficiency of empty fruit bunches (EFB) and POME and the possible land-use change in the future. Recommendations are made for improving environmental performance of palm biodiesel and for securing the long-term availability of crude palm oil supply with a view towards sustainable palm biodiesel production. -- Highlights: ► Environmental sustainability of palm biodiesel production in Thailand is assessed. ► Palm biodiesel can provide GHG reduction of around 46–73% as compared to diesel. ► Net energy ratio and renewability of palm biodiesel both range between 2 and 4. ► Efficient use of by-products in the value chain enhances environmental benefits.

Environmental implications of accelerated gasohol production: preliminary assessment

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

This report assesses the environmental impacts of increasing US production of fuel ethanol by 330 million gallons per year in the 1980 to 1981 time frame in order to substitute gasohol for 10% of the unleaded gasoline consumed in the United States. Alternate biomass feedstocks are examined and corn is selected as the most logical feedstock, based on its availability and cost. Three corn conversion processes that could be used to attain the desired 1980 to 1981 production are identified; fermentation plants that use a feedstock of starch and wastes from an adjacent corn refining plants are found to have environmental and economic advantages. No insurmountable environmental problems can be achieved using current technology; the capital and operating costs of this control are estimated. If ethanol production is increased substantially after 1981, the environmentally acceptable use or disposal of stillage, a liquid by-product of fermentation, could become a serious problem.

Voluntary Tools Of The Environmental Oriented Product Policy

Science.gov (United States)

Rusko, Miroslav

2015-06-01

Environmentally oriented product policy is in general determined by the relationships between its aims - subjects - objects - tools. It is based on the integrated approach to the product life cycle, which anticipates an enormous amount of information. It has to solve the questions of the international trade as well as the rules of the International Trade Organization. New forms of preventive environmental strategies and especially Green Marketing are being introduced helping to solve environmental problems and environmental motivation of producers. Many producers face great attention of the public regarding their approach to the environment. Despite the fact that the customers buy products fairly prudently and their behaviour is markedly affected by prices, a particular part of the population prefers the products that do not burden the environment. This brings about a situation, in which the producers within their mutual competition and in relation to customers are enforced to behave responsibly.

The evolution of conditional dispersal and reproductive isolation along environmental gradients.

Science.gov (United States)

Payne, Joshua L; Mazzucco, Rupert; Dieckmann, Ulf

2011-03-21

Dispersal modulates gene flow throughout a population's spatial range. Gene flow affects adaptation at local spatial scales, and consequently impacts the evolution of reproductive isolation. A recent theoretical investigation has demonstrated that local adaptation along an environmental gradient, facilitated by the evolution of limited dispersal, can lead to parapatric speciation even in the absence of assortative mating. This and other studies assumed unconditional dispersal, so individuals start dispersing without regard to local environmental conditions. However, many species disperse conditionally; their propensity to disperse is contingent upon environmental cues, such as the degree of local crowding or the availability of suitable mates. Here, we use an individual-based model in continuous space to investigate by numerical simulation the relationship between the evolution of threshold-based conditional dispersal and parapatric speciation driven by frequency-dependent competition along environmental gradients. We find that, as with unconditional dispersal, parapatric speciation occurs under a broad range of conditions when reproduction is asexual, and under a more restricted range of conditions when reproduction is sexual. In both the asexual and sexual cases, the evolution of conditional dispersal is strongly influenced by the slope of the environmental gradient: shallow environmental gradients result in low dispersal thresholds and high dispersal distances, while steep environmental gradients result in high dispersal thresholds and low dispersal distances. The latter, however, remain higher than under unconditional dispersal, thus undermining isolation by distance, and hindering speciation in sexual populations. Consequently, the speciation of sexual populations under conditional dispersal is triggered by a steeper gradient than under unconditional dispersal. Enhancing the disruptiveness of frequency-dependent selection, more box-shaped competition kernels

Evaluation of the environmental conditioning factors in the perspective of expansion of ethanol production in Brazil; Avaliacao dos condicionantes ambientais na perspectiva de expansao da producao de etanol no Brasil

Energy Technology Data Exchange (ETDEWEB)

Silva, Conceicao Elaine Cardoso

2010-03-15

Various countries have studied the possibility of adding ethanol to gasoline or using pure fuel ethanol as an alternative to petroleum derivatives. Brazil occupies a leading position in this scenario because with its National Alcohol Program (Programa Nacional do Alcool - PROALCOOL), created in 1975, it became the pioneer in setting up a biofuels program. Since then it has accumulated experience and gained mastery of the technology to produce ethanol from sugarcane. Hence there is a strong expectation that the country can become the world's main ethanol exporter. This thesis examines the main environmental impacts associated with the ethanol productive chain, which are relevant conditioning factors for the expansion of this industry in Brazil. The study describes the evolution of PROALCOOL and the overview of current structure of the brazilian sugar-alcohol sector, identifies technologies and environmental management policies, and presents the perspective of expansion of ethanol production. Thus, the study undertakes an extensive review of the literature and examines to what extent the creation and implementation of public and private environmental management policies (legal restrictions and market instruments, respectively) interfere with the expansion of these productive activities. (author)

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

A. Fedoryszyn

2013-01-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method.The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authorsindicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

Fedoryszyn A.

2013-03-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method. The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authors indicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Environmental interactions of cement-based products

NARCIS (Netherlands)

Florea, M.V.A.; Schmidt, W.; Msinjili, N.S.

2016-01-01

The environmental interactions of concrete and other cement-based products encompasses both the influence of such materials on their environment, as well as the effects of the environment on the materials in time. There are a number of ways in which the environmental impact of concrete can be

Energy and environmental implications of copper production

Energy Technology Data Exchange (ETDEWEB)

Alvardo, Sergio [Chile Univ., Dept. of Mechanical Engineering, Santiago (Chile); Maldonado, Pedro; Jaques, Ivan [Chile Univ., Energy Research Program, Santiago (Chile)

1999-04-01

Primary copper production is a major activity in the mining sector. It is highly energy-intensive, ranking third in specific energy consumption (SEC) among the five major basic metals (aluminum, copper, iron, lead and zinc) and poses important environmental hazards. We examine the large discrepancy between theoretical (from thermodynamics) and actual (from empirical data) SECs and then describe relevant environmental issues, focusing on the most significant energy-related environmental impacts of primary copper production with emphasis on greenhouse-gas (GHG) emissions. An example of GHG energy-related abatement that concurrently improves energy use is presented. (Author)

Voluntary Tools Of The Environmental Oriented Product Policy

Directory of Open Access Journals (Sweden)

Rusko Miroslav

2015-06-01

Full Text Available Environmentally oriented product policy is in general determined by the relationships between its aims – subjects – objects - tools. It is based on the integrated approach to the product life cycle, which anticipates an enormous amount of information. It has to solve the questions of the international trade as well as the rules of the International Trade Organization. New forms of preventive environmental strategies and especially Green Marketing are being introduced helping to solve environmental problems and environmental motivation of producers. Many producers face great attention of the public regarding their approach to the environment. Despite the fact that the customers buy products fairly prudently and their behaviour is markedly affected by prices, a particular part of the population prefers the products that do not burden the environment. This brings about a situation, in which the producers within their mutual competition and in relation to customers are enforced to behave responsibly.

Does environmental friendliness equal healthiness? Swiss consumers' perception of protein products.

Science.gov (United States)

Lazzarini, Gianna A; Zimmermann, Jasmin; Visschers, Vivianne H M; Siegrist, Michael

2016-10-01

Food production and consumption have major impacts on the environment. At the same time, changes in human diets worldwide are increasingly leading to health problems. Both issues are highly influenced by consumers' everyday food choices and could be addressed by reducing consumption of meat and other animal products. To promote sustainable food consumption, we need to know how consumers perceive the environmental friendliness and healthiness of food products, on which criteria they base their evaluations of environmental friendliness and healthiness, and how their estimations relate to life cycle assessments and nutrient profiling. We presented 30 protein products, which varied in provenance, production methods, and processing, to 85 participants from Switzerland. They were asked to sort the products once according to their perceived environmental friendliness and once according to their perceived healthiness. The mean distances between the products were compared to the products' life cycle assessments and nutrient profiles. The results showed that perceived environmental friendliness and healthiness are highly correlated. The main predictors of the products' perceived environmental friendliness were product category, presence of an organic label, and provenance; and for perceived healthiness, these predictors were product category, fat content, processing, and presence of an organic label. Environmental friendliness and healthiness estimations were significantly correlated to the life cycle assessments and the nutrient profiles of the products, respectively. Hence, to promote healthy and environmentally friendly food choices, motivators related to environmental friendliness and healthiness could be used in synergy. Awareness about meat's environmental impact should be increased and better information is needed for consumers to make an accurate environmental impact and healthiness assessments of protein products. Copyright © 2016 Elsevier Ltd. All rights reserved.

Production conditions of bioenergy in Swedish agriculture; Produktionsfoerutsaettningar foer biobraenslen inom svenskt jordbruk

Energy Technology Data Exchange (ETDEWEB)

Boerjesson, Paal

2007-05-15

The overall aim of this report is to analyse and describe the production conditions of bioenergy in Swedish agriculture and how these conditions can vary due to different factors. The conclusion is that the potential for producing bioenergy in Swedish agriculture will vary significantly depending on which energy crops are cultivated, which type of agricultural land is utilised and the geographical location of the production. Furthermore, different crop residues and other by-products from agriculture, utilised for energy purposes, will affect the bioenergy potential. To which extent this physical/biological potential will be utilised in the future depends mainly on economic conditions and financial considerations. These aspects are not included in this study. The report starts with a description of current crop production in Sweden, expressed in energy terms, the energy needed for this production and the regional variation in crop yields. The local variations in cultivation conditions are also analysed, as well as variations over the area of a single farm. Another aspect discussed is the production conditions of energy crops on previous farm land not currently utilised. The report includes an analysis of the potential supply of crop residues and other by-products for energy purposes, such as straw, tops and leaves of sugar beets, manure etc, as well as the regional variation of these residues and by-products. A similar analysis is made of the regional production conditions and potential biomass yields of traditional crops and new energy crops. These analyses also include energy balance calculations showing the energy input needed for different production systems in relation to the harvested biomass yield, and the potential for increased biomass yields in the future. Based on the findings of these various analyses, calculations are made showing some examples of how much bioenergy Swedish agriculture can deliver, depending on how much agricultural land is utilised for

The behavior of Kevlar fibers under environmental-stress conditions

Science.gov (United States)

Perry, Mark Charles

There are a myriad of mechanisms by which polymers can degrade and fail. It is therefore important to understand the physical mechanics, chemistry, their interactions, and kinetics. This pursuit becomes more than just "academic" because these mechanisms might just change with service conditions (i.e. environment and loading). If one does not understand these processes from the molecular to macroscopic scale it would be exceedingly difficult to gain information from accelerated testing because the mechanisms just might change from one condition to another. The purpose of this study was to probe these processes on scales ranging from molecular to macroscopic in environmental stress conditions. This study reports the results of environmental-stress degradation of Kevlar 49 fibers. The environmental agent of focus was the ubiquitous air pollutant complex NOsb{x}. Other materials and environments were investigated to a lesser extent for purposes of comparison. Mechanical property (i.e., short-term strength, modulus, and creep lifetime) degradation was examined using single fiber, yarn, and epoxy coated yarn (composite) specimens under environmental-stress conditions. Optical and scanning electron microscopes were employed to examine and compare the appearance of fracture features resulting from the various testing conditions. Atomic force microscopy augmented these studies with detailed topographical mappings and measures of the fracture surface frictional and modulus properties. Molecular processes (i.e., chain scission and other mechanical-chemical reactions) were probed by measures of changes in viscosity average molecular weight and the infrared spectra. It was demonstrated that environmental-stress degradation effects do occur in the Kevlar-NOsb{x} gas system. Strength decay in environmentally exposed unloaded fibers was demonstrated and a synergistic response in creep reduced fiber lifetimes by three orders of magnitude at moderate loadings. That is to say, the

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S PETROTAC

Science.gov (United States)

Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S TECHSUPPRESS

Science.gov (United States)

Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

Age-dependent associations between telomere length and environmental conditions in roe deer.

Science.gov (United States)

Wilbourn, Rachael V; Froy, Hannah; McManus, Marie-Christina; Cheynel, Louise; Gaillard, Jean-Michel; Gilot-Fromont, Emmanuelle; Regis, Corinne; Rey, Benjamin; Pellerin, Maryline; Lemaître, Jean-François; Nussey, Daniel H

2017-09-01

Telomere length (TL) represents a promising biomarker of overall physiological state and of past environmental experiences, which could help us understand the drivers of life-history variation in natural populations. A growing number of studies in birds suggest that environmental stress or poor environmental conditions are associated with shortened TL, but studies of such relationships in wild mammals are lacking. Here, we compare leucocyte TL from cross-sectional samples collected from two French populations of roe deer which experience different environmental conditions. We found that, as predicted, TL was shorter in the population experiencing poor environmental conditions but that this difference was only significant in older individuals and was independent of sex and body mass. Unexpectedly, the difference was underpinned by a significant increase in TL with age in the population experiencing good environmental conditions, while there was no detectable relationship with age in poor conditions. These results demonstrate both the environmental sensitivity and complexity of telomere dynamics in natural mammal populations, and highlight the importance of longitudinal data to disentangle the within- and among-individual processes that generate them. © 2017 The Authors.

Environmental impacts on technical products

International Nuclear Information System (INIS)

1991-01-01

The interaction between an object and its environment is examined by methods of environment simulation. With regard to possible synergisms, technical considerations and holistic thinking are essential. Environmental simulation is mainly concerned with questions of ability to function and the service life of technical products in their environment. The environmental simulation is used to discover cause/effect mechanisms in ageing and weathering processes. Questions of artificial ageing and speeded up time tests play a great part here. (orig.) [de

Environmental innovations in the product chain

DEFF Research Database (Denmark)

Remmen, Arne; Holgaard, Jette Egelund

2003-01-01

The paper gives a brief overview of different positions within innovation and network theory, and on that basis a framework is developed and discussed in relation to environmental innovations.The paper also highlights how enterprises within two different trades in the Danish food industry have made...... environmental innovations related to their processes and products....

Guidelines for the Deployment of Product-Related Environmental Legislation into Requirements for the Product Development Process

DEFF Research Database (Denmark)

Ferraz, Mariana; Pigosso, Daniela Cristina Antelmi; Teixeira, Cláudia Echevenguá

2013-01-01

Environmental legislation is increasingly changing its focus from end-of-pipe approaches to a life cycle perspective. Therefore, manufacturing companies are increasingly identifying the need of deploying and incorporating product-related environmental requirements into the product development...... process. This paper presents twelve guidelines, clustered into three groups, to support companies in the identification, analysis and deployment of product requirements from product-related environmental legislation....

Conditional Probability Analysis: A Statistical Tool for Environmental Analysis.

Science.gov (United States)

The use and application of environmental conditional probability analysis (CPA) is relatively recent. The first presentation using CPA was made in 2002 at the New England Association of Environmental Biologists Annual Meeting in Newport. Rhode Island. CPA has been used since the...

The biotechnology of hydrogen production by Nostoc flagelliforme grown under chemostat conditions

Energy Technology Data Exchange (ETDEWEB)

Lichtl, R.R.; Bazin, M.J.; Hall, D.O. [Div. of Life Sciences, King`s College, London Univ. (United Kingdom)

1997-11-01

The potential of using N{sub 2}-fixing cyanobacteria to produce hydrogen photobiologically has stimulated research on the physiology and biotechnology of species exhibiting high H{sub 2} production rates over long periods of time. In this work Nostoc flagelliforme, a terrestrial N{sub 2}-fixing cyanobacterium, has been examined to establish its physiology and potential for H{sub 2} production under controlled conditions. Cell filaments of N. flagelliforme were purified and grown in liquid culture to optimize its H{sub 2} metabolism. In batch-grown cultures the activity of nitrogenase, the key enzyme for H{sub 2} production in N{sub 2}-fixing organisms, was found to be high only during a short phase of exponential growth. A chemostat system was thus constructed for long-term experiments using continuous cultures, with the aim of exploiting the exponential growth phase. The dilution rate (D) and environmental factors, such as N{sub 2} concentration in the gas phase and temperature, significantly influenced H{sub 2} production. Cells grown continuously under the optimized conditions of D=0.022 h{sup -1}, 34 C and 5.1 kPa N{sub 2} in the gas phase exhibited H{sub 2} production rates that were more than four times higher than the maximal rates under standard batch growth conditions. (orig.)

Environmental impacts of cultured meat production.

Science.gov (United States)

Tuomisto, Hanna L; de Mattos, M Joost Teixeira

2011-07-15

Cultured meat (i.e., meat produced in vitro using tissue engineering techniques) is being developed as a potentially healthier and more efficient alternative to conventional meat. Life cycle assessment (LCA) research method was used for assessing environmental impacts of large-scale cultured meat production. Cyanobacteria hydrolysate was assumed to be used as the nutrient and energy source for muscle cell growth. The results showed that production of 1000 kg cultured meat requires 26-33 GJ energy, 367-521 m(3) water, 190-230 m(2) land, and emits 1900-2240 kg CO(2)-eq GHG emissions. In comparison to conventionally produced European meat, cultured meat involves approximately 7-45% lower energy use (only poultry has lower energy use), 78-96% lower GHG emissions, 99% lower land use, and 82-96% lower water use depending on the product compared. Despite high uncertainty, it is concluded that the overall environmental impacts of cultured meat production are substantially lower than those of conventionally produced meat.

Environmental emergency in the oil production and oil products transport

Directory of Open Access Journals (Sweden)

Jozef Čopan

2006-10-01

Full Text Available The paper refers to the experience of the environmental emergency response in the case of accidental leakages of oil or oil products into the environment. The gained experience is demonstrated on four different sites where the remediation of contaminated soil / groundwater and emergency response were carried out by the Czech environmental company DEKONTA a.s.

In vitro wheat haploid embryo production by wheat x maize cross system under different environmental conditions

International Nuclear Information System (INIS)

Khan, M.A.; Ahmad, J.

2011-01-01

Haploids are helpful in studies for inter genomic relationship, identifying molecular markers, reducing time period of varietal development and increasing efficiency of breeding program. In case of bread wheat (Triticum aestivum L.), wheat x maize cross system is the most successful system due to its higher efficiency, more haploid embryo production and low genetic specificity. The haploid embryo production is affected by many factors i.e. light, temperature, relative humidity and tiller culture media. A study was carried out comprising 25 genotypes of bread wheat for haploid embryo production using 100 mgL/sup -1/ 2,4-D, 40Gl/sup -1/ Sucrose and 8mlL/sup -1/ Sulphurous acid. Haploid embryo production was observed at various levels of environmental factors i.e. maize pollen collection temperature, time of pollination after tiller emasculation, light intensity and relative humidity during haploid seed formation. Maximum haploid embryo formation recorded was 9.52%. Best temperature observed for pollination was 21-26 degree C, optimum time duration for pollination was 24 hours after emasculation, light intensity was 10,000 Lux and relative humidity was 60-65% at 20-22 degree C. (author)

Affluence and objective environmental conditions: Evidence of differences in environmental concern in metropolitan Brazil

OpenAIRE

Nawrotzki, Raphael J.; Guedes, Gilvan; do Carmo, Roberto Luiz

2014-01-01

In an age of climate change, researchers need to form a deepened understanding of the determinants of environmental concern, particularly in countries of emerging economies. This paper provides a region-specific investigation of the impact of socio-economic status (SES) and objective environmental conditions on environmental concern in urban Brazil. We make use of data that were collected from personal interviews of individuals living in the metropolitan areas of Baixada Santista and Campinas...

Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

Directory of Open Access Journals (Sweden)

Yan-Yan Wang

2011-09-01

Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

Leading product-related environmental performance indicators: a selection guide and database

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

Ecodesign is a proactive environmental management and improvement approach employed in the product development process, which aims to minimize the environmental impacts caused during a product's life cycle and thus improve its environmental performance. The establishment of measurable environmental...... in the selection and application of environmental performance indicators - a more structured approach is still lacking. This paper presents the efforts made to identify and systematize existing leading product-related environmental performance indicators, based on a systematic literature review, and to develop...

The static friction response of non-glabrous skin as a function of surface energy and environmental conditions

NARCIS (Netherlands)

Klaassen, Michel; de Vries, Erik G.; Masen, Marc Arthur

2017-01-01

The (local) environmental conditions have a significant effect on the interaction between skin and products. Plasticisation of the stratum corneum occurs at high humidity, causing this layer to soften and change its surface free energy. In this work we study the effects of the micro-climate on the

Influence of culture media and environmental factors on mycelial growth and conidial production of Diplocarpon mali.

Science.gov (United States)

Zhao, H; Huang, L; Xiao, C L; Liu, J; Wei, J; Gao, X

2010-06-01

To identify media and environmental conditions suitable for rapid mycelial growth and sporulation of Diplocarpon mali. Liquid shake cultures were used to evaluate effects of media and environmental conditions on mycelial growth and conidial production of D. mali. Carrot sucrose broth (CSB), potato and carrot dextrose broth (PCDB) and potato and carrot sucrose broth (PCSB) were most favourable for rapid mycelial growth. PCDB, PCSB, PCB (potato and carrot broth) and carrot dextrose broth (CDB) were favourable for conidial production. All carbon sources tested and peptone favoured for mycelial growth. Carbon and nitrogen sources tested did not significantly stimulate conidial production. The optimum temperature for mycelial growth and conidial production was 25 degrees C. No mycelial growth occurred at 5 or 30 degrees C, but D. mali survived at these temperatures. Active mycelial growth occurred at pH 5-7, and pH 5-8 was favourable for sporulation. PCDB and PCSB incubated at 25 degrees C for 14 day are recommended for mycelial growth and conidial production of D. mali. The information generated in this study will facilitate mycological and pathological research on D. mali and Marssonina leaf blotch of apple caused by D. mali.

Clean production and design of products - Complex system and environmental politics of products

International Nuclear Information System (INIS)

Sanchez, M.

1999-01-01

The orientation of the environmental problem in sustainable terms, especially in the industrialized economies, a new profile in the last years has found. In these economies, the search of a clean production franked by a coherent politics of products and the contribution of the design of products, it have given to the environmental speech a new dimension. With the present text it is sought to respond to the necessity of exploring in Colombia this topic that has a decisive paper inside the instruments of protection of the environment cooperating to improve the quality of life in other latitudes. At the moment the theoretical foundations around the development of products play a important role in the different lines of applied investigation carried out by these countries, especially in the mark of a politics of sustainable development. In spite of the importance of this factor in the industrialized countries where the capacity of integration of a coordinated administration is of great meaning, in Colombia, particularly, the relationship between development and design of products with industry, investigation and political of development and, for our case with a clean production, it is characterized by the scarce insert and attention of this discipline

Environmental impact assessment of conventional and organic milk production

NARCIS (Netherlands)

Boer, de I.J.M.

2003-01-01

Organic agriculture addresses the public demand to diminish environmental pollution of agricultural production. Until now, however, only few studies tried to determine the integrated environmental impact of conventional versus organic production using life cycle assessment (LCA). The aim of this

Design of environmentally friendly products using indicators

DEFF Research Database (Denmark)

Lenau, Torben Anker; Bey, Niki

2001-01-01

The paper describes the requirements of product designers towards methods for environmental evaluation; it argues that indicators can be used for rough environmental evaluations and it presents experiences made with the indicator-based Oil Point Method (OPM). This method is illustrated by means...

Transcriptional Profiling of Chromera velia Under Diverse Environmental Conditions

KAUST Repository

Tayyrov, Annageldi

2014-05-01

Since its description in 2008, Chromera velia has drawn profound interest as the closest free-­‐living photosynthetic relative of apicomplexan parasites that are significant pathogens, causing enormous health and economic problems. There-­‐ fore, this newly described species holds a great potential to understand evolu-­‐ tionary basis of how photosynthetic algae evolved into the fully pathogenic Apicomplexa and how their common ancestors may have lived before they evolved into obligate parasites. Hence, the aim of this work is to understand how C. velia function and respond to different environmental conditions. This study aims to reveal how C. velia is able to respond to environmental perturbations that are applied individually and simultaneously since, studying stress factors in separation fails to elucidate complex responses to multi stress factors and un-­‐ derstanding the systemic regulation of involved genes. To extract biologically significant information and to identify genes involved in various physiological processes under variety of environmental conditions (i.e. a combination of vary-­‐ ing temperatures, iron availability, and salinity in the growth medium) we pre-­‐ pared strand specific RNA-­‐seq libraries for 83 samples in diverse environmental conditions. Here, we report the set of significantly differentially expressed genes as a re-­‐ sponse to the each condition and their combinations. Several interesting up-­‐ regulated and down-­‐regulated genes were found and their functions and in-­‐ volved pathways were studied. We showed that the profound regulation of HSP20 proteins is significant under stress conditions and hypothesized that the-­‐ se proteins might be involved in their movements.

Product-related Environmental Performance Indicators: a systematic literature review

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2013-01-01

Ecodesign is a proactive environmental management approach employed in the product development process (PDP) which aims to minimize the environmental impacts caused during products’ life-cycle, improving its environmental performance. The establishment of measurable environmental performance...

Investigating the impact of environmental attitude on the decision to purchase a green product with the mediating role of environmental concern and care for green products

Directory of Open Access Journals (Sweden)

Esmaeilpour Majid

2017-06-01

Full Text Available The intention to purchase green products is the tendency of a person who prefers to purchase a product with optimal environmental characteristics rather than usual products. Nowadays, the environment is very important and maintaining it is a vital issue for all groups of people, whether in the customer's position or in the distributor’s position. However, in spite of the increased environmental awareness among consumers and encouragements made by producers for them to buy green products, we require further investigation in this area in order to increase green purchasing among different group of people. The main objective of this study is to investigate the impact of the environmental attitude on the decision to purchase a green product with the mediating role of environmental concerns and care for green products. This research is an applied research, and correlational-descriptive in terms of data analysis. The research population includes consumers from Bushehr city, sampled based on availability. In this research, 300 questionnaires were distributed among consumers. Structural equation modeling was used to analyze the data. The findings of this research showed that the environmental attitude of customers has significant and positive impact on caring for green products and environmental concerns. In addition, environmental concerns and care for green products have a significant and positive impact on green purchasing decision.

Environmental control technology in petroleum drilling and production

International Nuclear Information System (INIS)

Wojtanowicz, A.K.

1997-01-01

Environmental control technology (ECT) is process integrated and relates mainly to pollution prevention and risk assessment. Mechanisms of environmental impact in petroleum drilling, well completion and production, include the generation of waste, induction of toxicity or the creation of pathways for pollutant migration. The identification and evaluation of these mechanisms constitute two parts of the scope of ECT. A third part is the development of new techniques to comply with environmental requirements without prejudicing productivity. The basic concepts of the ECT approach are presented in this chapter. The approach is then used to analyse oilfield drilling and production processes. Environmental control components developed in these technologies are described. These include: the control of the volume and toxicity of drilling fluids; source separation technology in produced water cleaning; subsurface injection of oilfield waste slurries; containment technology in the integrity of petroleum wells; subsurface reduction of produced water; oilfield pit closure technology. (37 figures; 26 tables; 227 references) (UK)

Environmental Performance of Kettle Production: Product Life Cycle Assessment

Science.gov (United States)

Marcinkowski, Andrzej; Zych, Krzysztof

2017-12-01

The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA) conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach) where the main function is boiling 3360 l of water during 4-year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g). The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste scenario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix) which determined final comparison results. Basing on LCA results, some improvements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

ENVIRONMENTAL PERFORMANCE OF KETTLE PRODUCTION: PRODUCT LIFE CYCLE ASSESSMENT

Directory of Open Access Journals (Sweden)

Andrzej MARCINKOWSKI

2017-10-01

Full Text Available The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach where the main function is boiling 3360 l of water during 4- year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g. The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste sce-nario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix which determined final comparison results. Basing on LCA results, some im-provements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

Assessment of productivity loss in air-conditioned buildings using PMV index

Energy Technology Data Exchange (ETDEWEB)

Kosonen, R. [Halton OY, Kausala (Finland); Tan, F. [CapitaLand Commercial Limited, Singapore (Singapore)

2004-07-01

This theoretical study reports on the assessment of productivity loss in air-conditioned office buildings using the PMV approach and makes use of Wyon's reviews [D.P. Wyon, P.O. Fanger, B.W. Olesen, C.J.K. Pedersen, The mental performance of subjects clothed for comfort at two different air temperatures, Ergonomics 18 (1975) 358-374; D.P. Wyon, Individual microclimate control: required range, probable benefits and current feasibility, in: Proceedings of Indoor Air '96, Institute of Public Health, Tokyo, 1996; D.P. Wyon, Indoor environmental effects on productivity. IAQ 96 Paths to better building environments/Keynote address. Y. Kevin. Atlanta, ASHRAE, pp. 5-15] as the basis to compare and to relate how the productivity loss could be minimised through improved thermal comfort design criteria. The finding shows that task-related performance is significantly correlated with the human perception of thermal environment that in turn is dependent on temperatures. Different combinations of thermal criteria (air velocity, clo, metabolic, etc.) can lead to similar PMV value and the PMV equation is useful to predict productivity loss that is due to the rate of change in thermal conditions. The study also highlights the issues that remain to be resolved in future research. (author)

Environmentally Benign Production of Stretchable and Robust Superhydrophobic Silicone Monoliths.

Science.gov (United States)

Davis, Alexander; Surdo, Salvatore; Caputo, Gianvito; Bayer, Ilker S; Athanassiou, Athanassia

2018-01-24

Superhydrophobic materials hold an enormous potential in sectors as important as aerospace, food industries, or biomedicine. Despite this great promise, the lack of environmentally friendly production methods and limited robustness remain the two most pertinent barriers to the scalability, large-area production, and widespread use of superhydrophobic materials. In this work, highly robust superhydrophobic silicone monoliths are produced through a scalable and environmentally friendly emulsion technique. It is first found that stable and surfactantless water-in-polydimethylsiloxane (PDMS) emulsions can be formed through mechanical mixing. Increasing the internal phase fraction of the precursor emulsion is found to increase porosity and microtexture of the final monoliths, rendering them superhydrophobic. Silica nanoparticles can also be dispersed in the aqueous internal phase to create micro/nanotextured monoliths, giving further improvements in superhydrophobicity. Due to the elastomeric nature of PDMS, superhydrophobicity can be maintained even while the material is mechanically strained or compressed. In addition, because of their self-similarity, the monoliths show outstanding robustness to knife-scratch, tape-peel, and finger-wipe tests, as well as rigorous sandpaper abrasion. Superhydrophobicity was also unchanged when exposed to adverse environmental conditions including corrosive solutions, UV light, extreme temperatures, and high-energy droplet impact. Finally, important properties for eventual adoption in real-world applications including self-cleaning, stain-repellence, and blood-repellence are demonstrated.

Effects of Environmental Factors and Nutrient Availability on the Biochemical Composition of Algae for Biofuels Production: A Review

Directory of Open Access Journals (Sweden)

Ganti S. Murthy

2013-09-01

Full Text Available Due to significant lipid and carbohydrate production as well as other useful properties such as high production of useful biomolecular substrates (e.g., lipids and the ability to grow using non-potable water sources, algae are being explored as a potential high-yield feedstock for biofuels production. In both natural and engineered systems, algae can be exposed to a variety of environmental conditions that affect growth rate and cellular composition. With respect to the latter, the amount of carbon fixed in lipids and carbohydrates (e.g., starch is highly influenced by environmental factors and nutrient availability. Understanding synergistic interactions between multiple environmental variables and nutritional factors is required to develop sustainable high productivity bioalgae systems, which are essential for commercial biofuel production. This article reviews the effects of environmental factors (i.e., temperature, light and pH and nutrient availability (e.g., carbon, nitrogen, phosphorus, potassium, and trace metals as well as cross-interactions on the biochemical composition of algae with a special focus on carbon fixation and partitioning of carbon from a biofuels perspective.

The shaping of environmental concern in product chains: analysing Danish case studies on environmental aspects in product chain relations

DEFF Research Database (Denmark)

Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

indirect demand for greening activities. The analysis shows the co-construction of environmental concerns and demands, companies’ environmental practices and technological developments, and their stabilisation in the supply chain. The case studies also point to how the greening of frontrunners might make...... the systems of production, consumption, knowledge and regulation are discussed. The role of boundary objects is discussed with eco-labelling as case. The role of and the impact on the product chain relations are analysed as part of these mechanisms. From the case studies, green innovations in the product...... chain, which the case company represents, are identified. Direct customer and regulatory demands, as well as indirect societal and regulatory demands are mapped, and their role for product chain greening analysed. The case studies point to the importance of customer demand, regulation and potentially...

Relations between protein production, protein quality and environmental factors in Pisum mutants

International Nuclear Information System (INIS)

Gottschalk, W.; Mueller, H.P.; Wolff, G.

1975-01-01

The seed protein content of 138 radiation-induced Pisum mutants was determined. The variability of this genetically well-defined material agrees approximately with that of the world collection of Pisum sativum. Some environmental factors to a great extent influence the protein production of the mutants and the initial line. Therefore, it is necessary to consider the relations between the genetically controlled protein production and its dependence upon the environmental factors. This is especially evident if the protein situation of the same genotypes cultivated under the moderate climatic conditions of middle Europe is compared with the subtropical conditions of India. A generally firm correlation between seed size and protein content could not be found in material regarding 148 different mutants of our assortment. Therefore, the selection of small-grained mutants does not result in a selection of protein-rich genotypes in Pisum sativum. Considering all the criteria positively and negatively influencing the protein production, a positive situation could be found in some mutants, especially in the fasciated ones. Furthermore, an improvement of the protein quality could be reached by a genetically conditioned alteration of the globulin-albumin ratio leading to an increase of some essential amino acids such as methionine and lysine. The combined action of mutant genes results in unexpected changes of the protein quantity as well as the quality of the recombinants in relation to their parental mutants. The comparison of some essential amino acids of our useful mutants with those of the varieties of other genera of the Leguminosae shows certain trends of biochemical alterations realized during evolutionary development of the family. (author)

Modes of environmental management in transnational product chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

2007-01-01

opportunities by being present in the country where the sourcing takes place. The paper discusses different modes of environmental management in such transnational product chains based on a number of cases, and explores the links to the business strategy of the companies and national and international......Many companies in industrialised countries are outsourcing production or sourcing materials and products in countries with lower environmental protection than the companies’ countries of origin. The background is access to special materials and/or lower costs, but some times also the market...

Environmental assessment. Energy efficiency standards for consumer products

Energy Technology Data Exchange (ETDEWEB)

McSwain, Berah

1980-06-01

The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

Progress towards Sustainable Production: Environmental, Economic, and Social Assessments of the Cellulose Nanofiber Production Process

Directory of Open Access Journals (Sweden)

Dami Moon

2017-12-01

Full Text Available We assessed the environmental, economic, and social impacts of the process for producing cellulose nanofibers (CNFs, which are considered to be a valuable sustainable woody biomass feedstock. The greenhouse gas (GHG emissions associated with CNF production are greater than the emissions associated with producing most plastic materials used in vehicle components because the grinding process during CNF production generates significant GHG emissions. The cost of CNF production is also higher than the cost of producing comparable plastics for automotive use because of the high cost of the pulverization process. The sensitivity analysis in this study suggested that GHG emissions and manufacturing costs could be reduced by 19.1–76.4% and 3.6–12.2%, respectively, by improving the energy efficiency of CNF production by two to five times. We compared the potential social risks associated with CNF production between Japan and Vietnam using a product social impact life cycle assessment database. It is desirable to reduce the social risk on the fair salary and child labor, and to improve the safe and healthy living conditions in the local communities that import wood chips harvested in Vietnam.

Technology diffusion, product differentiation and environmental subsidies

Energy Technology Data Exchange (ETDEWEB)

McGinty, M. [Univ. of Wisconsin, Milwaukee, WI (United States). Dept. of Economics; Vries, F.P. de [Univ. of Groningen (Netherlands). Dept. of Law and Economics

2007-07-01

Technological change is often seen as the promising device that will mitigate or solve environmental problems. Policy intervention that spurs the development, adoption and diffusion of new, environmentally benign technologies therefore holds great appear for environmental authorities. Policymakers have various instruments at their disposal to affect technological diffusion, ranging from direct regulation (command-and-control strategies) to market-based instruments, such as taxes, subsidies and tradable pollution permits. This paper examines environmental subsidies as a technology diffusion policy. The authors apply evolutionary game theory to explore the relationship between subsidies for clean technology, the diffusion of that technology and the degree of product differentiation in an imperfectly competitive market. They show that the subsidy succeeds in reducing environmental damage only when the substitution effect (the reduction in pollution associated with the clean technology) exceeds the output effect (the extent that the subsidy increases output). When the substitution effect does dominate, environmental damage decreases monotonically during the diffusion process. The extent of diffusion (the degree to which clean technolgy replaces dirty) and the likelihood that the substitution effect will dominate both decrease with the extent of product differentiation. Finally, the subsidy for clean technology will spill over to the remaining dirty producers increasing their profit as well.

CO{sub 2} exchange, environmental productivity indices, and productivity of Agaves and Cacti under current and elevated atmospheric CO{sub 2} concentrations. Terminal report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The research described in the proposal investigated net CO{sub 2} uptake and biomass accumulation for an extremely productive CAM plant, the prickly pear cactus Opuntia ficus-indica, under conditions of elevated CO{sub 2} concentrations for relatively long periods. The influences of soil water status, air temperature, and the photosynthetic photon flux (PPF) on net CO{sub 2} uptake over 24-h periods were evaluated to enable predictions to be made based on an Environmental Productivity Index (EPI). Specifically, EPI predicts the fraction of maximal daily net CO{sub 2} uptake based on prevailing environmental conditions. It is the product of indices for temperature, soil water, and intercepted PPF, each of which range from 0.00 when that index factor completely inhibits net CO{sub 2} uptake to 1.00 when no limitation occurs. For instance, the Water Index is 1.00 under wet conditions and decreases to 0.00 during prolonged drought. Although the major emphasis of the research was on net CO{sub 2} uptake and the resulting biomass production for O. ficus-indica, effects of elevated CO{sub 2} concentrations on root: shoot ratios and on the activities of the two carboxylating enzymes were also investigated. Moreover, experiments were also done on other CAM plants, including Agave deserti, Agave salmiana, and Hylocereus undatus, and Stenocereus queretaroensis.

CO{sub 2} exchange environmental productivity indices, and productivity of agaves and cacti under current and elevated atmospheric CO{sub 2} concentrations. Final report

Energy Technology Data Exchange (ETDEWEB)

Nobel, P.S.

1994-12-31

The research described in the proposal investigated net CO{sub 2} uptake and biomass accumulation for an extremely productive CAM plant, the prickly pear cactus Opuntia ficus-indica, under conditions of elevated CO{sub 2} concentrations for relatively long periods. The influences of soil water status, air temperature, and the photosynthetic photon flux (PPF) on net CO{sub 2} uptake over 24-h periods were evaluated to enable predictions to be made based on an Environmental Productivity Index (EPI). Specifically, EPI predicts the fraction of maximal daily net CO{sub 2} uptake based on prevailing environmental conditions. It is the product of indices for temperature, soil water, and intercepted PPF, each of which range from 0.00 when that index factor completely inhibits net CO{sub 2} uptake to 1.00 when no limitation occurs. For instance, the Water Index is 1.00 under wet conditions and decreases to 0.00 during prolonged drought. Although the major emphasis of the research was on net C0{sub 2} uptake and the resulting biomass production for O. ficus-indica, effects of elevated CO{sub 2} concentrations on root: shoot ratios and on the activities of the two carboxylating enzymes were also investigated. Moreover, experiments were also done on other CAM plants, including Agave deserti, Agave salmiana, and Hylocereus undatus, and Stenocereus queretaroensis.

Transformation of environmental conditions in large former Soviet countries: regional analysis

Science.gov (United States)

Bityukova, V. R.; Borovikov, M. S.

2018-01-01

The article studies changes in the structure of environmental conditions of regions in the large former Soviet countries (case study of Russia and Kazakhstan) that have formed considerable contrasts in the placement of industrial complex and population settlement during the previous development stages. The changes related to the transition to market economy have led to essential transformation of environmental conditions. A complex index allowing to assess changes at the regional level in Kazakhstan and Russia and to reveal main similarities and differences between those changes is applied to studying the transformation of regional and industry structure. The article examines both industry-specific and spatial patterns forming environmental conditions at the regional level.

Carbon and environmental footprinting of global biofuel production

OpenAIRE

Hammond, Geoff P.; Seth, S.M.

2013-01-01

The carbon and environmental footprints associated with the global production of biofuels have been computed from a baseline of 2007-2009 out until 2019. Estimates of future global biofuel production were adopted from OECD-FAO and related projections. In order to determine the footprints associated with these (essentially 'first generation') biofuel resources, the overall environmental footprint was disaggregated into bioproductive land, built land, carbon, embodied energy, materials and wast...

Diet and bioclimatic conditions on production and milk quality

Directory of Open Access Journals (Sweden)

F. P. Campos

2018-05-01

Full Text Available It was aimed to analyze the productive performance of lactating cows on isoprotein fed diets, at differentiated environmental conditions. Eight Holstein cows were used, grouped in two 4 × 4 balanced Latin squares design. The treatments were evaluated in 2 × 2 factorial designs: sources of roughage (corn silage – CS plus concentrate, and the combination of corn silage with sugarcane - CSSC, 1:1 on DM, plus concentrate and distinct environment (with= WS and without= OS, fan and nebulizers system= Sfn. The estimation of dry matter intake (DMI, productive performance and physicochemical parameters of milk were evaluated. There was no interaction effect of environment factors and source of forage. There was signiÀ cant effects for the source forage factors, where the DMI for the CSSC based diet was higher than the CS based diet in the effect of forage (4.22 vs. 4.06% BW, and 22.3 vs. 21.7 kg/d, respectively, P≤0.05, but with similar milk production correcting 3.5% fat (23.01 vs. 22.62, CSSC and CS; 22.85 vs. 22.78 kg/day, WS and OS, respectively, P≥0.05. The feed efÀ ciency and conversion was similar in both factors (102.8 vs. 104.7% and 0.99 vs. 1.0, CSSC and CS; 102.5 vs. 104.9% and 1.0 vs. 0.99, WS and OS, respectively, P≥0.05. The beneÀ t-diet cost ratio was higher for CS-based diet than for CSSC (7.44 vs. 6.97, P≤0.05. There were effects only in the forage factor for CP milk (3.26 vs. 3.23%, P≤0.05, lactose (4.54 vs. 4.49%, P≤0.05 and urea nitrogen in milk (23.21 vs. 20.71 mg/dL, P≤0.05 and the superiority arising from the CSSC-based diet in comparison to the CS diet. There was higher for T and THI (28.1 vs. 23.6°C and 75.1 vs. 71.1, respectively, P≤0.05, and lower RH to 2:00 pm (47.7 vs. 64.5%, P≤0.05. The linear score showed negative correlations with DMI, milk production, lactose and urea nitrogen (-0.36, -0.69, -0.44 and -0.32, P≤0.05, respectively. The use of the diet based on CSSC proposed increases in DMI and

Environmental aspects of decentralized electricity production

International Nuclear Information System (INIS)

Henry, J.P.

1991-01-01

Renewable energy sources are the focus of considerable interest because they do not place future generations at risk; the development of cogeneration has been favorably received on the whole because it uses energy that would otherwise be lost. Difficulties are sometimes encountered in the development of small-scale hydroelectric facilities (older facilities negative aspects, over production impression in France, etc.). Environmental protection regulations do not distinguish between centralized and decentralized electricity production, but between large and small production facilities

Local environmental conditions and the stability of protective layers on steel surfaces

Energy Technology Data Exchange (ETDEWEB)

Jensen, J P [Technical Univ. of Denmark, Lyngby (Denmark); Bursik, A

1996-12-01

Local environmental conditions determine whether the protective layers on steel surfaces are stable. With unfavorable local environmental conditions, the protective layers may be subject to damage. Taking the cation conductivity of all plant cycle streams <0.2 {mu}S/cm for granted, an adequate feed-water and - if applicable - boiler water conditioning is required to prevent such damage. Even if the mentioned conditions are met in a bulk, the local environmental conditions may be inadequate. The reasons for this may be the disregarding of interactions among material, design, and chemistry. The paper presents many possible mechanisms of protective layer damage that are directly influenced or exacerbated by plant cycle chemistry. Two items are discussed in more detail: First, the application of all volatile treatment for boiler water conditioning of drum boiler systems operating at low pressures and, second, the chemistry in the transition zone water/steam in the low pressure turbine. The latter is of major interest for the understanding and prevention of corrosion due to high concentration of impurities in the aqueous liquid phases. This is a typical example showing that local environmental conditions may fundamentally differ from the overall bulk chemistry. (au) 19 refs.

Techno-economic and environmental assessment of biogas production from banana peel (Musa paradisiaca) in a biorefinery concept.

Science.gov (United States)

Martínez-Ruano, Jimmy Anderson; Caballero-Galván, Ashley Sthefanía; Restrepo-Serna, Daissy Lorena; Cardona, Carlos Ariel

2018-04-07

Two scenarios for the biogas production using Banana Peel as raw material were evaluated. The first scenario involves the stand-alone production of biogas and the second scenario includes the biogas production together with other products under biorefinery concept. In both scenarios, the influence of the production scale on the process economy was assessed and feasibility limits were defined. For this purpose, the mass and energy balances were established using the software Aspen Plus along with kinetic models reported in the literature. The economic and environmental analysis of the process was performed considering Colombian economic conditions. As a result, it was found that different process scales showed great potential for biogas production. Thus, plants with greater capacity have a greater economic benefit than those with lower capacity. However, this benefit leads to high-energy consumption and greater environmental impact.

Ukrainian realities of labeling of environmentally friendly products

Directory of Open Access Journals (Sweden)

I.M. Tsaruk

2016-12-01

Full Text Available The basis of life of any society is a safe environment that is not only the guarantee of welfare and quality of life, but also the guarantee of the further development of human civilization. That is why in the modern world the issue of the preservation of the natural environment is of special actuality. The gradual awareness by humanity of new threats (high degree of concentration of harmful industries; high level of resource and energy consumption; lack of modern environmental technologies; slow but inevitable degradation of the gene pool of a population due to the consumption of poor quality and in most cases harmful products, etc. forced the society to seek new approaches to socio-economic development and environmental management. One of such approaches is the introduction of ecological and organic labeling. Marking is a source of information about the purity, safety and quality of the products offered in the market; effective information mechanism, which is a kind of quality mark for the offered products. The current practice of ecological and organic labeling aimed at the increase of level consumer's awareness and the changing models of purchasing behavior in the direction of environmental protection. The feature of most marking systems of environmentally friendly and safe products is the obligation of compliance with the established requirements used by producers of raw materials and technologies taking into account their potential environmental impact. Labeling of ecologically clean and safe products is reducing the negative impact on the environment and on the human's health. It is the consequence of changes in the economic environment, namely: the improvement of socio-ethical requirements to production; the increasing level of integration of producers and service providers; the customer's satisfaction in varieties of products; globalization of economic space; reduction of time for development, standardization and production. Labeling is

Assessment of environmental external effects in the production of energy

DEFF Research Database (Denmark)

Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

1995-01-01

A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project the environm......A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project...... the environmental damages for the energy production technologies are compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized....

Human Q fever incidence is associated to spatiotemporal environmental conditions

NARCIS (Netherlands)

Van Leuken, J. P G; Swart, A. N.; Brandsma, J.; Terink, W.; Van de Kassteele, J.; Droogers, P.; Sauter, F.; Havelaar, A. H.|info:eu-repo/dai/nl/072306122; Van der Hoek, W.

2016-01-01

Airborne pathogenic transmission from sources to humans is characterised by atmospheric dispersion and influence of environmental conditions on deposition and reaerosolisation. We applied a One Health approach using human, veterinary and environmental data regarding the 2009 epidemic in The

The development of environmental productivity

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha T.

the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

Assessing the environmental impact of energy production from hydrochar generated via hydrothermal carbonization of food wastes.

Science.gov (United States)

Berge, Nicole D; Li, Liang; Flora, Joseph R V; Ro, Kyoung S

2015-09-01

Although there are numerous studies suggesting hydrothermal carbonization is an environmentally advantageous process for transformation of wastes to value-added products, a systems level evaluation of the environmental impacts associated with hydrothermal carbonization and subsequent hydrochar combustion has not been conducted. The specific objectives of this work are to use a life cycle assessment approach to evaluate the environmental impacts associated with the HTC of food wastes and the subsequent combustion of the generated solid product (hydrochar) for energy production, and to understand how parameters and/or components associated with food waste carbonization and subsequent hydrochar combustion influence system environmental impact. Results from this analysis indicate that HTC process water emissions and hydrochar combustion most significantly influence system environmental impact, with a net negative GWP impact resulting for all evaluated substituted energy-sources except biomass. These results illustrate the importance of electricity production from hydrochar particularly when it is used to offset coal-based energy sources. HTC process water emissions result in a net impact to the environment, indicating a need for developing appropriate management strategies. Results from this analysis also highlight a need for additional exploration of liquid and gas-phase composition, a better understanding of how changes in carbonization conditions (e.g., reaction time and temperature) influence metal and nutrient fate, and the exploration of liquid-phase treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

CADDIS Volume 4. Data Analysis: Predicting Environmental Conditions from Biological Observations (PECBO Appendix)

Science.gov (United States)

Overview of PECBO Module, using scripts to infer environmental conditions from biological observations, statistically estimating species-environment relationships, methods for inferring environmental conditions, statistical scripts in module.

Environmental considerations in energy crop production

International Nuclear Information System (INIS)

Ranney, J.W.; Mann, L.K.

1994-01-01

This paper is a preliminary attempt to provide information on the probable environmental effects of energy crop production relative to other potential uses of the land. While dedicated energy crop production is anticipated to occur primarily on land currently in agricultural production, some pastureland and forestland with a high potential for conversion to agricultural production may be utilized. Experimental results suggest that chemical use on energy crops will be lower than on most row crops and that land producing energy crops should experience less erosion than land producing row crops. Long-term site productivity should not be a major issue if macro-and micro-fertilizers are added as needed and nutrient-conserving production techniques are used. (Author)

The Eocene Arctic Azolla bloom: environmental conditions, productivity and carbon drawdown.

Science.gov (United States)

Speelman, E N; Van Kempen, M M L; Barke, J; Brinkhuis, H; Reichart, G J; Smolders, A J P; Roelofs, J G M; Sangiorgi, F; de Leeuw, J W; Lotter, A F; Sinninghe Damsté, J S

2009-03-01

Enormous quantities of the free-floating freshwater fern Azolla grew and reproduced in situ in the Arctic Ocean during the middle Eocene, as was demonstrated by microscopic analysis of microlaminated sediments recovered from the Lomonosov Ridge during Integrated Ocean Drilling Program (IODP) Expedition 302. The timing of the Azolla phase (approximately 48.5 Ma) coincides with the earliest signs of onset of the transition from a greenhouse towards the modern icehouse Earth. The sustained growth of Azolla, currently ranking among the fastest growing plants on Earth, in a major anoxic oceanic basin may have contributed to decreasing atmospheric pCO2 levels via burial of Azolla-derived organic matter. The consequences of these enormous Azolla blooms for regional and global nutrient and carbon cycles are still largely unknown. Cultivation experiments have been set up to investigate the influence of elevated pCO2 on Azolla growth, showing a marked increase in Azolla productivity under elevated (760 and 1910 ppm) pCO2 conditions. The combined results of organic carbon, sulphur, nitrogen content and 15N and 13C measurements of sediments from the Azolla interval illustrate the potential contribution of nitrogen fixation in a euxinic stratified Eocene Arctic. Flux calculations were used to quantitatively reconstruct the potential storage of carbon (0.9-3.5 10(18) gC) in the Arctic during the Azolla interval. It is estimated that storing 0.9 10(18) to 3.5 10(18) g carbon would result in a 55 to 470 ppm drawdown of pCO2 under Eocene conditions, indicating that the Arctic Azolla blooms may have had a significant effect on global atmospheric pCO2 levels through enhanced burial of organic matter.

TESPI (Tool for Environmental Sound Product Innovation): a simplified software tool to support environmentally conscious design in SMEs

Science.gov (United States)

Misceo, Monica; Buonamici, Roberto; Buttol, Patrizia; Naldesi, Luciano; Grimaldi, Filomena; Rinaldi, Caterina

2004-12-01

TESPI (Tool for Environmental Sound Product Innovation) is the prototype of a software tool developed within the framework of the "eLCA" project. The project, (www.elca.enea.it)financed by the European Commission, is realising "On line green tools and services for Small and Medium sized Enterprises (SMEs)". The implementation by SMEs of environmental product innovation (as fostered by the European Integrated Product Policy, IPP) needs specific adaptation to their economic model, their knowledge of production and management processes and their relationships with innovation and the environment. In particular, quality and costs are the main driving forces of innovation in European SMEs, and well known barriers exist to the adoption of an environmental approach in the product design. Starting from these considerations, the TESPI tool has been developed to support the first steps of product design taking into account both the quality and the environment. Two main issues have been considered: (i) classic Quality Function Deployment (QFD) can hardly be proposed to SMEs; (ii) the environmental aspects of the product life cycle need to be integrated with the quality approach. TESPI is a user friendly web-based tool, has a training approach and applies to modular products. Users are guided through the investigation of the quality aspects of their product (customer"s needs and requirements fulfilment) and the identification of the key environmental aspects in the product"s life cycle. A simplified check list allows analyzing the environmental performance of the product. Help is available for a better understanding of the analysis criteria. As a result, the significant aspects for the redesign of the product are identified.

Environmental sustainability assessment of bio-ethanol production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2009-01-01

Bio-ethanol is playing an important role in renewable energy for transport according to Thai government policy. This study aims to evaluate the energy efficiency and renewability of bio-ethanol system and identify the current significant environmental risks and availability of feedstocks in Thailand. Four of the seven existing ethanol plants contributing 53% of the total ethanol fuel production in Thailand have been assessed by the net energy balance method and Life Cycle Assessment (LCA). A renewability and net energy ratio portfolio has been used to indicate whether existing bio-ethanol production systems have net energy gain and could help reduce dependency on fossil energy. In addition, LCA has been conducted to identify and evaluate the environmental hotspots of 'cradle to gate' bio-ethanol production. The results show that there are significant differences of energy and environmental performance among the four existing production systems even for the same feedstock. The differences are dependent on many factors such as farming practices, feedstock transportion, fuel used in ethanol plants, operation practices and technology of ethanol conversion and waste management practices. Recommendations for improving the overall energy and environmental performance of the bio-ethanol system are suggested in order to direct the bio-ethanol industry in Thailand towards environmental sustainability.

Environmental impact of industrial sludge stabilization/solidification products: chemical or ecotoxicological hazard evaluation?

Science.gov (United States)

Silva, Marcos A R; Testolin, Renan C; Godinho-Castro, Alcione P; Corrêa, Albertina X R; Radetski, Claudemir M

2011-09-15

Nowadays, the classification of industrial solid wastes is not based on risk analysis, thus the aim of this study was to compare the toxicity classifications based on the chemical and ecotoxicological characterization of four industrial sludges submitted to a two-step stabilization/solidification (S/S) processes. To classify S/S products as hazardous or non-hazardous, values cited in Brazilian chemical waste regulations were adopted and compared to the results obtained with a battery of biotests (bacteria, alga and daphnids) which were carried out with soluble and leaching fractions. In some cases the hazardous potential of industrial sludge was underestimated, since the S/S products obtained from the metal-mechanics and automotive sludges were chemically classified as non-hazardous (but non-inert) when the ecotoxicity tests showed toxicity values for leaching and soluble fractions. In other cases, the environmental impact was overestimated, since the S/S products of the textile sludges were chemically classified as non-inert (but non-hazardous) while ecotoxicity tests did not reveal any effects on bacteria, daphnids and algae. From the results of the chemical and ecotoxicological analyses we concluded that: (i) current regulations related to solid waste classification based on leachability and solubility tests do not ensure reliable results with respect to environmental protection; (ii) the two-step process was very effective in terms of metal immobilization, even at higher metal-concentrations. Considering that S/S products will be subject to environmental conditions, it is of great interest to test the ecotoxicity potential of the contaminants release from these products with a view to avoiding environmental impact given the unreliability of ecotoxicological estimations originating from chemical analysis. Copyright © 2011 Elsevier B.V. All rights reserved.

Evaluation of the social-environmental impacts associated with the production of panela in Santander (Colombia

Directory of Open Access Journals (Sweden)

Martha Melizza Ordoñez-Díaz,

2017-05-01

Full Text Available Panela (jaggery or non-centrifuged sugar is a natural food product characterized by its high nutritional value and sweetening power. In the department of Santander, Colombia, the transfor-mation of sugarcane juice into jaggery is carried out mainly in handcrafted sugar mills, which generate a permanent source of employment for rural families. However, according to the results obtained in this study, it should be mentioned that under the current conditions of artisanal production, this agricultural activity involves great physical effort and considerable risk to the workers` health. In addition, it causes significant negative environmental impacts during the production process, standing out changes in the atmospheric composition, microclimatic changes, and pollution of water resources. In order to contribute to the sustainability of the jaggery- production sector in the department of Santander, a qualitative diagnosis of biotic, abiotic and anthropological impacts generated by the production of artisanal jaggery are presented. The current situation of the national jaggery industry and the production process, from cutting sugarcane to the packaging of the final product are described. Identified impacts are characterized and some recommendations to achieve environmentally sustainable production process are provided.

Evaluation of Environmental Quality Productive Ecosystem Guayas (Ecuador).

Science.gov (United States)

Pozo, Wilson; Pardo, Francisco; Sanfeliu, Teófilo; Carrera, Gloria; Jordan, Manuel; Bech, Jaume; Roca, Núria

2015-04-01

Natural resources are deteriorating very rapidly in the Gulf of Guayaquil and the area of influence in the Guayas Basin due to human activity. Specific problems are generated by the mismanagement of the aquaculture industry affecting the traditional agricultural sectors: rice, banana, sugarcane, cocoa, coffee, and soya also studied, and by human and industrial settlements. The development of industrial activities such as aquaculture (shrimp building for shrimp farming in ponds) and agriculture, have increasingly contributed to the generation of waste, degrading and potentially toxic elements in high concentrations, which can have adverse effects on organisms in the ecosystems, in the health of the population and damage the ecological and environmental balance. The productive Guayas ecosystem, consists of three interrelated ecosystems, the Gulf of Guayaquil, the Guayas River estuary and the Guayas Basin buffer. The objective of this study was to evaluate the environmental quality of the productive Guayas ecosystem (Ecuador), through operational and specific objectives: 1) Draw up the transition coastal zone in the Gulf of Guayaquil, 2) Set temporal spatial variability of soil salinity in wetlands rice, Lower Guayas Basin, 3) evaluate the heavy metals in wetland rice in the Lower Basin of Guayas. The physical and chemical parameters of the soils have been studied. These are indicators of environmental quality. The multivariate statistical method showed the relations of similarities and dissimilarities between variables and parameter studies as stable. Moreover, the boundaries of coastal transition areas, temporal spatial variability of soil salinity and heavy metals in rice cultivation in the Lower Basin of Guayas were researched. The sequential studies included and discussed represent a broad framework of fundamental issues that has been valued as a basic component of the productive Guayas ecosystem. They are determinants of the environmental quality of the Guayas

A proposed tool to integrate environmental and economical assessments of products

International Nuclear Information System (INIS)

Senthil, Kumaran D.; Ong, S.K.; Nee, A.Y.C.; Tan, Reginald B.H.

2003-01-01

An attempt has been made to interpret the outcomes of a Life Cycle Assessment (LCA) in terms of environmental costs. This attempt ensures the environmental accountability of the products while LCA ensures their eco-friendly nature. Keeping this as an objective, a Life Cycle Environmental Cost Analysis (LCECA) model was developed. This new tool incorporates costing into the LCA practice. This model prescribes a life cycle environmental cost model to estimate and correlate the effects of these costs in all the life cycle stages of the product. The newly developed categories of eco-costs are: costs of effluent treatment/control/disposal, environmental management systems, eco-taxes, rehabilitation, energy and savings of recycling and reuse strategies. The mathematical model of LCECA determines quantitative expressions between the total cost of products and the various eco-costs. The eco-costs of the alternatives are compared with the computational LCECA model. This method enables the environmental as well as the economic assessment of products, which leads to cost-effective, eco-friendly design of products

Medieval Iceland, Greenland, and the New Human Condition: A case study in integrated environmental humanities

Science.gov (United States)

Hartman, Steven; Ogilvie, A. E. J.; Ingimundarson, Jón Haukur; Dugmore, A. J.; Hambrecht, George; McGovern, T. H.

2017-09-01

This paper contributes to recent studies exploring the longue durée of human impacts on island landscapes, the impacts of climate and other environmental changes on human communities, and the interaction of human societies and their environments at different spatial and temporal scales. In particular, the paper addresses Iceland during the medieval period (with a secondary, comparative focus on Norse Greenland) and discusses episodes where environmental and climatic changes have appeared to cross key thresholds for agricultural productivity. The paper draws upon international, interdisciplinary research in the North Atlantic region led by the North Atlantic Biocultural Organization (NABO) and the Nordic Network for Interdisciplinary Environmental Studies (NIES) in the Circumpolar Networks program of the Integrated History and Future of People on Earth (IHOPE). By interlinking analyses of historically grounded literature with archaeological studies and environmental science, valuable new perspectives can emerge on how these past societies may have understood and coped with such impacts. As climate and other environmental changes do not operate in isolation, vulnerabilities created by socioeconomic factors also beg consideration. The paper illustrates the benefits of an integrated environmental-studies approach that draws on data, methodologies and analytical tools of environmental humanities, social sciences, and geosciences to better understand long-term human ecodynamics and changing human-landscape-environment interactions through time. One key goal is to apply previously unused data and concerted expertise to illuminate human responses to past changes; a secondary aim is to consider how lessons derived from these cases may be applicable to environmental threats and socioecological risks in the future, especially as understood in light of the New Human Condition, the concept transposed from Hannah Arendt's influential framing of the human condition that is

Environmental assessment after decommissioning at the North Sea- Froey oil production site: a field study with biomarkers in fish and invertebrates

Energy Technology Data Exchange (ETDEWEB)

Pinturier, Laurence; Beyer, Jonny; Moltu, Ulf; Plisson, Saune Stephan; Berland, Harald; Sundt, Rolf; Bjoernstad, Anne; Sanni, Steinar

2006-03-15

The Froey field is situated in the North Sea and was operated by Total Exploration and Production Norge. Oil production started in 1995 and ceased in 2001, when the wells were permanently plugged and abandoned. The jacket was removed in 2002, and in 2003 the first post-production sediment monitoring survey was carried out at the field as a part of the regional sediment environmental monitoring survey of Region II. In parallel to the sediment monitoring survey and cuttings survey, Total E and P Norge decided to conduct an environmental survey based on the use of biological effects parameters (or biomarkers) to document the environmental condition of the site after decommissioning. A series of pollutant responsive biomarkers was selected in order to answer the following questions: is the environmental condition in the bottom water at the Froey location significantly different to the background situation as measured in the reference station? And does the cutting deposit affect the nearby environment. Conclusion: This paper present a selection of the results obtained during an environmental survey carried out at a decommissioned field, the Froey field, by Total E and P Norge and RF-Akvamiljoe. Detailed results and discussion will be presented more extensively in a peer review publication by Beyer et al. (2005). The objective of the survey was to evaluate the environmental condition at the Froey site by comparing it to a background situation measured at a reference site. The environmental condition was assessed by measuring biological effects parameters in invertebrates and fish living in close connection with the sediments. The results of this survey indicate only a very local pollutant effect in the vicinity of the cuttings limited to the invertebrates living and feeding on the sediment. No signal effects were measured in the selected fish species known to swallow large quantity of sediment when feeding. These results corroborate well the ones obtained from the

Optimizing cultivation of agricultural products using socio-economic and environmental scenarios.

Science.gov (United States)

RaheliNamin, Behnaz; Mortazavi, Samar; Salmanmahiny, Abdolrassoul

2016-11-01

The combination of degrading natural conditions and resources, climate change, growing population, urban development, and competition in a global market complicate optimization of land for agricultural products. The use of pesticides and fertilizers for crop production in the agricultural fields has become excessive in the recent years and Golestan Province of Iran is no exception in this regard. For this, effective management with an efficient and cost-effective practice should be undertaken, maintaining public service at a high level and preserving the environment. Improving the production efficiency of agriculture, efficient use of water resources, decreasing the use of pesticides and fertilizers, improving farmer revenue, and conservation of natural resources are the main objectives of the allocation, ranking, and optimization of agricultural products. The goal of this paper is to use an optimization procedure to lower the negative effects of agriculture while maintaining a high production rate, which is currently a gap in the study area. We collected information about fertilizer and pesticide consumption and other data in croplands of eastern Golestan Province through face-to-face interviews with farmers to optimize cultivation of the agricultural products. The toxicity of pesticides according to LD50 was also included in the optimization model. A decision-support software system called multiple criteria analysis tool was used to simultaneously minimize consumption of water, chemical fertilizers, and pesticides and maximize socio-economic returns. Three scenarios for optimization of agricultural products were generated that alternatively emphasized on environmental and socio-economic goals. Comparing socio-economic and environmental performance of the optimized agricultural products under the three scenarios illustrated the conflict between social, economic, and environmental objectives. Of the six crops studied (wheat, barley, rice, soybeans, oilseed rape

Hierarchical Satellite-based Approach to Global Monitoring of Crop Condition and Food Production

Science.gov (United States)

Zheng, Y.; Wu, B.; Gommes, R.; Zhang, M.; Zhang, N.; Zeng, H.; Zou, W.; Yan, N.

2014-12-01

The assessment of global food security goes beyond the mere estimate of crop production: It needs to take into account the spatial and temporal patterns of food availability, as well as physical and economic access. Accurate and timely information is essential to both food producers and consumers. Taking advantage of multiple new remote sensing data sources, especially from Chinese satellites, such as FY-2/3A, HJ-1 CCD, CropWatch has expanded the scope of its international analyses through the development of new indicators and an upgraded operational methodology. The new monitoring approach adopts a hierarchical system covering four spatial levels of detail: global (sixty-five Monitoring and Reporting Units, MRU), seven major production zones (MPZ), thirty-one key countries (including China) and "sub- countries." The thirty-one countries encompass more that 80% of both global exports and production of four major crops (maize, rice, soybean and wheat). The methodology resorts to climatic and remote sensing indicators at different scales, using the integrated information to assess global, regional, and national (as well as sub-national) crop environmental condition, crop condition, drought, production, and agricultural trends. The climatic indicators for rainfall, temperature, photosynthetically active radiation (PAR) as well as potential biomass are first analysed at global scale to describe overall crop growing conditions. At MPZ scale, the key indicators pay more attention to crops and include Vegetation health index (VHI), Vegetation condition index (VCI), Cropped arable land fraction (CALF) as well as Cropping intensity (CI). Together, they characterise agricultural patterns, farming intensity and stress. CropWatch carries out detailed crop condition analyses for thirty one individual countries at the national scale with a comprehensive array of variables and indicators. The Normalized difference vegetation index (NDVI), cropped areas and crop condition are

Perception of the environmental impacts of current and alternative modes of pig production by stakeholder groups.

Science.gov (United States)

Petit, Jean; van der Werf, Hayo M G

2003-08-01

The current industrial pig production model is in crisis, due to its association with environmental pollution, doubtful product quality and lack of animal well-being. In Bretagne (France), a region of intensive pig production, a survey of seven stakeholder groups concerned with pig production was conducted, as part of a research programme dedicated to the assessment of the environmental impact of different modes of pig production. A very large majority of pig producers (93%) and their suppliers (100%) considers pig farms as an asset for the region, whereas a majority of scientists (58%), activists (78%) and consumers (54%) sees it as a handicap. Differences among stakeholder groups are minor with respect to the perceived importance of environmental and social issues. Stakeholders agree on the relative level of responsibility of pig farms with respect to specific problems. For all groups unpleasant odours and water quality come first with respect to responsibility, for most groups soil quality comes second, followed by product safety and air quality. For a future improved mode of pig production, 76% of pig producers and their suppliers prefer to adapt the current model, for all other groups the majority prefers an alternative model. While pig producers and their suppliers prefer a slurry-based housing system, all other groups prefer a straw-based system. Pig producers see the slurry-based system as technically superior and associate the straw-based system with poor working conditions, whereas consumers associate the slurry-based system in the first place with poor water quality and associate the straw-based system with less pollution. These results will be of use in the research programme on the environmental impact of modes of pig production, as they indicate the environmental impacts to be considered and their relative importance. The results will also help in deciding which options should be assessed. It is concluded that the poor image of the current pig

GEO-ECOLOGICAL PECULIARITIES OF ENVIRONMENTAL POLLUTION WITH OIL PRODUCTS EMITTED BY RAILROAD FACILITIES

Directory of Open Access Journals (Sweden)

Senyushchenkova Irina Mikhaylovna

2012-10-01

Full Text Available Linear railroad facilities have been producing an adverse impact on the environment by polluting it with oil products for an extensive period of time. The authors of the article consider several mechanisms of contamination and the pattern of its spread into soils. Currently, areas that used to be unsuitable for development as urban lands for geological or environmental reasons are now being intensively developed. The study is exemplified by a city outstretched onto the complex terrain. Complex topography contemplates geological, tectonics-related, hydrological conditions, exogenous processes and anthropogenic factors. In this connection, the main purpose of the study is to analyze the geo-ecological factors that impact urban lands in complex geo-morphological conditions with a view to their functional use against minimal environmental risks to assure the most favorable conditions for humans. Towards this end, the authors have applied the following theoretical and practical methods of research, including a pilot study, namely (1 the geomorphological analysis of urban lands, (2 the monitoring and analysis of the anthropogenic impact produced onto various constituents of the environment, and (3 development of methods of functional use of urban lands in complex geomorphological conditions. The authors have monitored contaminated lands to develop their recommendations for their development in complex geomorphological conditions, namely: 1. Urban development planning should be performed with consideration for the geomorphological elements taken as a whole, as they are closely connected to one another. 2. Selection of methods of rehabilitation of urban lands must be preceded by the zoning of the territory based on its geological and environmental properties.

ENVIRONMENTAL CONCERN TO ATTITUDE TOWARDS GREEN PRODUCTS: EVIDENCES FROM INDIA

Directory of Open Access Journals (Sweden)

Mohd Danish Kirmani

2016-11-01

Full Text Available The purpose of this paper is to explore the relationship of environmental concern of consumers with their attitude towards green products and also to identify the predictors of environmental concern. The data was generated from a researcher controlled sample of graduate and post-graduate students enrolled in educational institutions located in the national capital of India (New Delhi and surrounding areas popularly known as National Capital Region (NCR. The data generated was analysed employing Structural Equation Modelling (SEM. The study findings indicate that environmental concern has a significant and positive influence on attitude towards green products. Collectivism and eco-literacy emerged as predictors of the environmental concern of consumers. The findings of this study are expected to enhance the understanding of marketers of the role played by variables such as religiosity, collectivism, eco-literacy, and environmental concern in formation of attitude of consumers towards green products.

Peat 2003. Production, use, environmental impact

International Nuclear Information System (INIS)

2004-01-01

This report discusses the use of peat for energy production and other purposes, laws and other regulations affecting peat production and use, environmental impact, market situation and international statistics regarding peat production. In Sweden, the extraction and use of peat for energy production is regulated by several laws. Harvesting concessions must be approved by the county council. All combustion plants must be reported, or verified by regional or central authorities, depending on the size of the plant. Most important in this process is to verify the maximum emission levels permitted for sulphur, nitrogen oxides, particles, etc. Since 1991, a law on municipal energy planning requires descriptions of environmental consequences. Thus, environmental considerations must govern energy planning. Energy taxation in Sweden was changed in 1993. At present, the sulphur tax on fuel peat amounts to SEK 30 per kg of sulphur. Nitrogen oxides are also subject to a tax of SEK 40 per emitted kg. For peat, energy and environmental taxes total SEK 0.02 per kWh, excluding VAT. Peat harvesting for the production of energy aroused interest in the early 1980s as a consequence of the increased energy prices. In 2003, about 2,628,000 cubic metres of fuel peat were harvested in Sweden. The fuel peat is used mainly for production of hot water in district heating plants. In 2003, the total use of fuel peat amounted to 4,0 TWh. In addition to fuel peat, about 1,825,000 cubic metres of peat litter (mainly for horticultural use) was produced. In 2003, imports amounted to 382,3000 metric tons or 1.3 million cubic metres of peat. Exports amounted to 103,000 metric tons, consisting primarily of peat for horticultural use. The peat market in Sweden is divided into the energy market and the cultivation market. Political decisions regarding combustion taxes have a great impact on the competitive advantages of different fuels. The major competitors to peat are coal, oil, and renewable energy

Analysis of the environmental conditions at Gale Crater from MSL/REMS measurements

Energy Technology Data Exchange (ETDEWEB)

Martinez, G.; Torre-Juarez, M. de la; Vicente-Retortillo, A.; Kemppinen, O.; Renno, N.; Lemmon, M.

2016-07-01

The environmental conditions at Gale Crater during the first 1160 sols of the Mars Science Laboratory (MSL) mission are assessed using measurements taken by the Rover Environmental Monitoring Station (REMS) on-board the MSL Curiosity rover. REMS is a suite of sensors developed to assess the environmental conditions along the rover traverse. In particular, REMS has been measuring atmospheric pressure, atmospheric and ground temperature, relative humidity, UV radiation flux and wind speed. Here we analyze processed data with the highest confidence possible of atmospheric pressure, atmospheric and ground temperature and relative humidity. In addition, we estimate the daily UV irradiation at the surface of Gale Crater using dust opacity values derived from the Mastcam instrument. REMS is still in operation, but it has already provided the most comprehensive coverage of surface environmental conditions recorded by a spacecraft landed on Mars. (Author)

Product environmental footprint of strawberries: Case studies in Estonia and Germany.

Science.gov (United States)

Soode-Schimonsky, Eveli; Richter, Klaus; Weber-Blaschke, Gabriele

2017-12-01

The environmental impacts of strawberries have been assessed in several studies. However, these studies either present dissimilar results or only focus on single impact categories without offering a comprehensive overview of environmental impacts. We applied the product environmental footprint (PEF) methodology to broadly indicate the environmental impacts of various strawberry production systems in Germany and Estonia by 15 impact categories. Data for the 7 case studies were gathered from two farms with organic and two farms with conventional open field production systems in Estonia and from one farm with conventional open field and one farm with a polytunnel and greenhouse production system in Germany. The greenhouse production system had the highest environmental impact with a PEF of 0.0040. In the field organic production systems, the PEF was 0.0029 and 0.0028. The field conventional production systems resulted in a PEF of 0.0008, 0.0009 and 0.0002. Polytunnel PEF was 0.0006. Human toxicity cancer effects, particulate matter and human toxicity non-cancer effects resulted in the highest impact across all analysed production systems. The main contributors were electricity for cooling, heating the greenhouse and the use of agricultural machinery including fuel burning. While production stage contributed 85% of the total impact in the greenhouse, also other life cycle stages were important contributors: pre-chain resulted in 71% and 90% of impact in conventional and polytunnels, respectively, and cooling was 47% in one organic system. Environmental impact from strawberry cooling can be reduced by more efficient use of the cooling room, increasing the strawberry yield or switching from oil shale electricity to other energy sources. Greenhouse heating is the overall impact hotspot even if it based on renewable resources. A ranking of production systems based on the environmental impact is possible only if all relevant impacts are included. Future studies should aim

PRINCIPLES OF ENVIRONMENTAL ASSESSMENT IN THE LIFECYCLE OF PRODUCTS

Directory of Open Access Journals (Sweden)

Joanna Kulczycka

2017-02-01

Full Text Available One of the aims of the European Commission (EC activities is to introduce uniform rules for the environmental performance assessment based on the life cycle assessment method (LCA, which can be widely used e.g. in eco-labeling, assessment of goods, services, technology, etc. Therefore, from 1 November 2013 the European Commission implemented a pilot phase of the project on developing common methods for measuring the environmental performance of the product and organisation, aims to develop guidance documents in this field. The pilot phase includes development of the Category Rules relating to the calculation, verification and communication for environmental footprint of the 25 categories of products and two organizations. Therefore, the article presents the principle of environmental performance based on life cycle assessment in relation to the objectives of the proposed methodology of environmental footprint.

Can environmental conditions experienced in early life influence future generations?

Science.gov (United States)

Burton, Tim; Metcalfe, Neil B

2014-06-22

The consequences of early developmental conditions for performance in later life are now subjected to convergent interest from many different biological sub-disciplines. However, striking data, largely from the biomedical literature, show that environmental effects experienced even before conception can be transmissible to subsequent generations. Here, we review the growing evidence from natural systems for these cross-generational effects of early life conditions, showing that they can be generated by diverse environmental stressors, affect offspring in many ways and can be transmitted directly or indirectly by both parental lines for several generations. In doing so, we emphasize why early life might be so sensitive to the transmission of environmentally induced effects across generations. We also summarize recent theoretical advancements within the field of developmental plasticity, and discuss how parents might assemble different 'internal' and 'external' cues, even from the earliest stages of life, to instruct their investment decisions in offspring. In doing so, we provide a preliminary framework within the context of adaptive plasticity for understanding inter-generational phenomena that arise from early life conditions.

Effect of production conditions on the stability of a human bifidobacterial species Bifidobacterium longum in yogurt.

Science.gov (United States)

Abe, F; Tomita, S; Yaeshima, T; Iwatsuki, K

2009-12-01

Human bifidobacteria are more sensitive to external environmental factors than animal bifidobacteria, and it is difficult to ensure their stable survival in yogurt. The purpose of this investigation was to observe the survival of human bifidobacteria in yogurts produced under various production conditions. Frozen or lyophilized bifidobacteria starters containing Bifidobacterium longum BB536 originally isolated from an infant, and commercial lyophilized yogurt starters were used for yogurt preparation. After producing yogurts under various conditions, the survival of bifidobacteria in these yogurts over various storage periods was observed. Although there were some differences in bifidobacterial survival in yogurt between various production conditions, more than 1.0 x 10(7) CFU g(-1) of Bif. longum survived in yogurt after 35 days' storage at 5 degrees C. Lower fermentation temperature (37 degrees C) and inclusion of Lactococcus lactis in the starter significantly (P yogurt. In this investigation, the human bifidobacterial strain Bif. longum survived adequately in yogurt, although the fermentation temperature and starter composition affect bifidobacterial survival. This investigation indicates that stable probiotic yogurt using human bifidobacteria can be produced by choosing optimal production conditions.

Effect of environmental conditions on the fatty acid fingerprint of microbial communities

Science.gov (United States)

Biryukov, Mikhail; Dippold, Michaela; Kuzyakov, Yakov

2014-05-01

Lipid biomarkers, especially phospholipids, are routinely used to characterize microbial community structure in environmental samples. Interpretations of these fingerprints mainly depend on rare results of pure cultures which were cultivated under standardized batch conditions. However, membrane lipids (e.g. phopholipid biomarker) build up the interface between microorganisms and their environment and consequently are prone to be adapted according to the environmental conditions. We cultivated several bacteria, isolated from soil (gram-positive and gram-negative) under various conditions e.g. C supply and temperature regimes. Effect of growth conditions on phospholipids fatty acid (PLFA) as well as neutral lipid fatty acids (NLFA) and glycolipid fatty acids (GLFA) was investigated by conventional method of extraction and derivatization, followed by assessments with gas chromatography mass spectrometry (GC-MS). In addition, phospholipids were measured as intact molecules by ultra high performance liquid chromatography - quadrupole - time of flight mass spectrometer (UHPLC-Q-ToF) to further assess the composition of headgroups with fatty acids residues and their response on changing environmental conditions. PLFA fingerprints revealed a strong effect of growth stage, C supply and temperature e.g. decrease of temperature increased the amount of branched and/or unsaturated fatty acids to maintain the membrane fluidity. This strongly changes the ratio of specific to unspecific fatty acids depending on environmental conditions. Therefore, amounts of specific fatty acids cannot be used to assess biomass of a functional microbial group in soil. Intracellular neutral lipids depended less on environmental conditions reflecting a more stable biomarker group but also showed less specific fatty acids then PLFA. Therefore, combination of several lipid classes is suggested as more powerful tool to assess amounts and functionality of environmental microbial communities. Further

Environmental aspects of eucalyptus based ethanol production and use

International Nuclear Information System (INIS)

González-García, Sara; Moreira, Ma. Teresa; Feijoo, Gumersindo

2012-01-01

A renewable biofuel economy is projected as a pathway to decrease dependence on fossil fuels as well as to reduce greenhouse gases (GHG) emissions. Ethanol produced on large-scale from lignocellulosic materials is considered the automotive fuel with the highest potential. In this paper, a life cycle assessment (LCA) study was developed to evaluate the environmental implications of the production of ethanol from a fast-growing short rotation crop (SRC): eucalyptus as well as its use in a flexi-fuel vehicle (FFV). The aim of the analysis was to assess the environmental performance of three ethanol based formulations: E10, E85 and E100, in comparison with conventional gasoline. The standard framework of LCA from International Standards Organization was followed and the system boundaries included the cultivation of the eucalyptus biomass, the processing to ethanol conversion, the blending with gasoline (when required) and the final use of fuels. The environmental results show reductions in all impact categories under assessment when shifting to ethanol based fuels, excluding photochemical oxidant formation, eutrophication as well as terrestrial and marine ecotoxicity which were considerably influenced by upstream activities related to ethanol manufacture. The LCA study remarked those stages where the researchers and technicians need to work to improve the environmental performance. Special attention must be paid on ethanol production related activities, such as on-site energy generation and distillation, as well as forest activities oriented to the biomass production. The use of forest machinery with higher efficiency levels, reduction of fertilizers dose and the control of diffuse emissions from the conversion plant would improve the environmental profile. -- Highlights: ► The identification of the environmental implications of the production and use of eucalyptus based ethanol was carried out. ► Eucalyptus is a Spanish common and abundant fast-growing short

Effects of substrata and environmental conditions on ecological succession on historic shipwrecks

Science.gov (United States)

González-Duarte, Manuel M.; Fernández-Montblanc, Tomás; Bethencourt, Manuel; Izquierdo, Alfredo

2018-01-01

An understanding of the interactions between biological, chemical and physical dynamics is especially important for the adequate conservation of the Underwater Cultural Heritage. However, while physical and chemical processes are relatively well-investigated, the biological communities associated with these habitats are poorly studied. We compared the sessile community developed on panels of different materials placed on two historical shipwrecks, the Fougueux and the Bucentaure, from the Battle of Trafalgar (October 1805). Six materials used at the construction of vessels at the 18th and 19th centuries were selected: copper, brass, cast iron, carbon steel, pine and oak. The sessile community developed on the panels was studied two and 15 months after their immersion at the water to determine the effects of materials and environmental conditions (sediments, waves, hydrodynamic conditions, temperature and salinity) on ecological succession and the possible implications at the conservation of historical shipwrecks. On the Fougueux, the environmental conditions more strongly influenced the biological succession than the material type, with pioneer colonisers dominating the communities in both sampling periods. On the Bucentaure, exposed to more stable environmental conditions, the sessile community showed differences between sampling periods and among materials at the end of the experiment. Under these more stable environmental conditions, the material type showed a higher influence on the sessile community. Species that produce calcareous concretions developed on metallic panels, but were absent on wood panels, where the shipworm Teredo navalis was more abundant. The relationship between environmental conditions, sessile organisms and material type can influence the conservation status of the archaeological sites.

Nano-enabled environmental products and technologies - opportunities and drawbacks

DEFF Research Database (Denmark)

Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

Molasses wastewater treatment and lipid production at low temperature conditions by a microalgal mutant Scenedesmus sp. Z-4

OpenAIRE

Ma, Chao; Wen, Hanquan; Xing, Defeng; Pei, Xuanyuan; Zhu, Jiani; Ren, Nanqi; Liu, Bingfeng

2017-01-01

Background Simultaneous wastewater treatment and lipid production by oleaginous microalgae show great potential to alleviate energy shortage and environmental pollution, because they exhibit tremendous advantages over traditional activated sludge. Currently, most research on wastewater treatment by microalgal are carried out at optimized temperature conditions (25?35??C), but no information about simultaneous wastewater treatment and lipid production by microalgae at low temperatures has been...

How can we improve the environmental sustainability of poultry production?

Science.gov (United States)

Leinonen, Ilkka; Kyriazakis, Ilias

2016-08-01

The review presents results of recent life cycle assessment studies aiming to quantify and improve the environmental performance of UK poultry production systems, including broiler meat, egg and turkey meat production. Although poultry production has been found to be relatively environmentally friendly compared with the production of other livestock commodities, it still contributes to environmental impacts, such as global warming, eutrophication and acidification. Amongst different sub-processes, feed production and transport contributes about 70 % to the global warming potential of poultry systems, whereas manure management contributes about 40-60 % to their eutrophication potential and acidification potential, respectively. All these impacts can be reduced by improving the feed efficiency, either by changing the birds through genetic selection or by making the feed more digestible (e.g. by using additives such as enzymes). However, although genetic selection has the potential to reduce the resources needed for broiler production (including feed consumption), the changing need of certain feed ingredients, most notably protein sources as a result of changes in bird requirements may limit the benefits of this strategy. The use of alternative feed ingredients, such as locally grown protein crops and agricultural by-products, as a replacement of South American grown soya, can potentially also lead to improvements in several environmental impact categories, as long as such feeding strategies have no negative effect on bird performance. Other management options, such as improving poultry housing and new strategies for manure management have also the potential to further improve the environmental sustainability of the poultry industries in Europe.

Environmental impact assessment of alfalfa (Medicago sativa L.) hay production.

Science.gov (United States)

Bacenetti, Jacopo; Lovarelli, Daniela; Tedesco, Doriana; Pretolani, Roberto; Ferrante, Valentina

2018-09-01

On-farm production of hay and high-protein-content feed has several advantages such as diversification of on-farm cultivated crops, reduction of off-farm feed concentrates transported over long distances and a reduction in runoff during the winter season if grown crops are perennial. Among those crops cultivated for high-protein-content feed, alfalfa (Medicago sativa L.) is one of the most important in the Italian context. Nevertheless, up to now, only a few studies have assessed the environmental performance of alfalfa hay production. In this study, using the Life Cycle Assessment approach, the environmental impact of alfalfa hay production in Northern Italy was analyzed. More in detail, two production practices (without and with irrigation) were compared. The results show that alfalfa hay production in irrigated fields has a better environmental performance compared to non-irrigated production, mainly because of the yield increase achieved with irrigation. In particular, for the Climate Change impact category, the impact is equal to 84.54 and 80.21kgCO 2 /t of hay for the scenario without and with irrigation, respectively. However, for two impact categories (Ozone Depletion and Human Toxicity-No Cancer Effect), the impact of irrigation completely offsets the yield increase, and the cultivation practice without irrigation shows the best environmental performance. For both scenarios, the mechanization of harvest is the main environmental hotspot, mostly due to fuel consumption and related combustion emissions. Wide differences were highlighted by comparing the two scenarios with the Ecoinvent process of alfalfa hay production; these differences are mostly due to the cultivation practice and, in particular, to the more intensive fertilization in Swiss production. Copyright © 2018 Elsevier B.V. All rights reserved.

The community conditioning hypothesis and its application to environmental toxicology

International Nuclear Information System (INIS)

Matthews, R.A.; Landis, W.G.; Matthews, G.B.

1996-01-01

In this paper the authors present the community conditions hypothesis, ecological communities retain information bout events in their history. This hypothesis, which was derived from the concept of nonequilibrium community ecology, was developed as a framework for understanding the persistence of dose-related responses in multispecies toxicity tests. The authors present data from three standardized aquatic microcosm (SAM) toxicity tests using the water-soluble fractions from turbine fuels (Jet-A, JP-4, and JP-8). In all three tests, the toxicants depressed the Daphnia populations for several weeks, which resulted in algal blooms in the dosed microcosms due to lower predation rates. These effects were short-lived, and by the second and third months of the experiments, the Daphnia populations appeared to have recovered. However, multivariate analysis of the data released dose/response differences that reappeared during the later part of the tests, often due to differences in other consumers (rotifers, ostracods, ciliates), or algae that are not normally consumed (filamentous green algae and bluegreen algae). The findings are consistent with ecological theories that describe communities as the unique production of their etiologies. The implications of this to environmental toxicology are that almost all environmental events leave lasting effects, whether or not they have observed them

Effect of farm and simulated laboratory cold environmental conditions on the performance and physiological responses of lactating dairy cows supplemented with bovine somatotropin (BST)

Science.gov (United States)

Becker, B. A.; Johnson, H. D.; Li, R.; Collier, R. J.

1990-09-01

A study was conducted to evaluate the effect of bovine somatotropin (BST) supplementation in twelve lactating dairy cows maintained in cold environmental conditions. Six cows were injected daily with 25 mg of BST; the other six were injected with a control vehicle. Cows were maintained under standard dairy management during mid-winter for 30 days. Milk production was recorded twice daily, and blood samples were taken weekly. Animals were then transferred to environmentally controlled chambers and exposed to cycling thermoneutral (15° to 20° C) and cycling cold (-5° to +5° C) temperatures for 10 days in a split-reversal design. Milk production, feed and water intake, body weights and rectal temperatures were monitored. Blood samples were taken on days 1, 3, 5, 8 and 10 of each period and analyzed for plasma triiodothyronine (T3), thyroxine (T4), cortisol, insulin and prolactin. Under farm conditions, BST-treated cows produced 11% more milk than control-treated cows and in environmentally controlled chambers produced 17.4% more milk. No differences due to BST in feed or water intake, body weights or rectal temperatures were found under laboratory conditions. Plasma T3 and insulin increased due to BST treatment while no effect was found on cortisol, prolactin or T4. The results showed that the benefits of BST supplementation in lactating dairy cows were achieved under cold environmental conditions.

Combustion and environmental performance of clean coal end products

Energy Technology Data Exchange (ETDEWEB)

Skodras, G.; Sakellaropoulos, G. [Centre for Research and Technology, Hellas, Ptolemaidas-Kozanis, Ptolemaida (Greece). Inst. for Solid Fuel Technolgy and Applications]|[Aristotle Univ. of Thessaloniki, Thessaloniki (Greece). Dept. of Chemical Engineering, Chemical Process Engineering Lab]|[Chemical Process Engineering Research Inst., Thessaloniki (Greece). Lab. of Solid Fuels and Environment; Someus, E. [Thermal Desorption Technology Group (Greece); Grammelis, P.; Amarantos, P.S. [Centre for Research and Technology, Hellas, Ptolemaidas-Kozanis, Ptolemaida (Greece). Inst. for Solid Fuel Technolgy and Applications; Palladas, A.; Basinas, P.; Natas, P.; Prokopidou, M.; Diamantopoulou, I.; Sakellaropoulos, G. [Aristotle Univ. of Thessaloniki, Thessaloniki (Greece). Dept. of Chemical Engineering, Chemical Process Engineering Lab

2006-07-01

Clean and affordable power production is needed in order to achieve sustainable economic development. This paper focused on clean coal technologies in which coal-fired power plants are used in conjunction with large amounts of renewable energy sources to offer a high level of process safety and long term management of all residual operation streams. Thermal Desorption Recycle-Reduce-Reuse Technology (TDT-3R) was described as being a promising solid fuel pretreatment process for clean energy production up to 300 MWe capacities. TDT-3R is based on low temperature carbonisation fuel pre-treatment principles, which produce cleansed anthracite type fuels from coal and other carbonaceous material such as biomass and organic wastes. The combustion efficiency of such clean coals and the environmental performance of the TDT-3R process were investigated in this study via pilot scale tests of clean fuel production. Tests included flue gas emissions monitoring, raw fuel and product characterisation and thermogravimetric tests, polychlorinated dibenzo-p-dioxins and dibenzo-furans, and heavy metals analyses, and toxicity tests. Raw material included coal and biomass, such as willow, straw and demolition wood. The fuels were heated in a rotary kiln operating at 550 degrees C under slightly vacuum conditions. Clean coals were tested either alone or in conjunction with biomass fuels in a pilot scale combustion facility at Dresden, Germany. The clean coal samples were shown to have higher fixed carbon and ash content and lower volatiles compared to the respective raw coal samples. The major advantage of the TDT-3R process is the production of fuels with much lower pollutants content. Low nitrogen, sulphur, chlorine and heavy metal contents result in produced fuels that have excellent environmental performance, allow boiler operation in higher temperatures and overall better efficiency. Moreover, the use of clean fuels reduces deposition problems in the combustion chamber due to the

Environmental services coupled to food products and brands: food companies interests and on-farm accounting.

Science.gov (United States)

Kempa, Daniela

2013-09-01

Much research has been carried out on governmental support of agri environmental measures (AEM). However, little is known about demands on and incentives from the commercial market for environmental contributions of the farmers. The factors farm structures, level of remuneration and legal framework have been thoroughly investigated. However, demands of the food industry for environmentally friendly goods(1) and their effects on farmers' decisions have not yet been analyzed. Leading companies in the food industry have observed an increasing consumer awareness and, due to higher competition, see an additional need to communicate environmental benefits which result from either organic production methods or agri-environmental measures. To address this research deficit, two case studies were carried out. The first case study is a survey aimed at the industrial food producers' demands with regards to the environmental performance of supplying farms. Concurrently, within a second survey farmers were questioned to find out what conditions are required to implement agri-environmental measures beyond cross compliance and document their environmental performance. This article presents the outcomes of the first case study. The results show that food companies have an interest in the documentation of environmental benefits of supplying farms for their marketing strategies. Provision of support by finance or contract-design is also seen as appropriate tool to promote an environmentally friendly production. In turn the food producers' demand and support for documented environmental services can have a positive influence on farmers' decisions for implementation and documentation of these services. Thus, the surveys provide essential findings for further development of documentation strategies for environmental benefits within the supply chain. Copyright © 2012 Elsevier Ltd. All rights reserved.

Comparative environmental impact and efficiency assessment of selected hydrogen production methods

Energy Technology Data Exchange (ETDEWEB)

Ozbilen, Ahmet, E-mail: Ahmet.Ozbilen@uoit.ca; Dincer, Ibrahim, E-mail: Ibrahim.Dincer@uoit.ca; Rosen, Marc A., E-mail: Marc.Rosen@uoit.ca

2013-09-15

The environmental impacts of various hydrogen production processes are evaluated and compared, considering several energy sources and using life cycle analysis. The results indicate that hydrogen produced by thermochemical water decomposition cycles are more environmentally benign options compared to conventional steam reforming of natural gas. The nuclear based four-step Cu–Cl cycle has the lowest global warming potential (0.559 kg CO{sub 2}-eq per kg hydrogen production), mainly because it requires the lowest quantity of energy of the considered processes. The acidification potential results show that biomass gasification has the highest impact on environment, while wind based electrolysis has the lowest. The relation is also investigated between efficiency and environmental impacts. -- Highlights: • Environmental performance of nuclear-based hydrogen production is investigated. • The GWP and AP results are compared with various hydrogen production processes. • Nuclear based 4-step Cu–Cl cycle is found to be an environmentally benign process. • Wind-based electrolysis has the lowest AP value.

Resistance of Microorganisms to Extreme Environmental Conditions and Its Contribution to Astrobiology

Directory of Open Access Journals (Sweden)

Pabulo Henrique Rampelotto

2010-06-01

Full Text Available In the last decades, substantial changes have occurred regarding what scientists consider the limits of habitable environmental conditions. For every extreme environmental condition investigated, a variety of microorganisms have shown that not only can they tolerate these conditions, but that they also often require these extreme conditions for survival. Microbes can return to life even after hundreds of millions of years. Furthermore, a variety of studies demonstrate that microorganisms can survive under extreme conditions, such as ultracentrifugation, hypervelocity, shock pressure, high temperature variations, vacuums, and different ultraviolet and ionizing radiation intensities, which simulate the conditions that microbes could experience during the ejection from one planet, the journey through space, as well as the impact in another planet. With these discoveries, our knowledge about the biosphere has grown and the putative boundaries of life have expanded. The present work examines the recent discoveries and the principal advances concerning the resistance of microorganisms to extreme environmental conditions, and analyzes its contributions to the development of the main themes of astrobiology: the origins of life, the search for extraterrestrial life, and the dispersion of life in the Universe.

The effects assessment of firm environmental strategy and customer environmental conscious on green product development.

Science.gov (United States)

Tsai, Ming-Tien; Chuang, Li-Min; Chao, Shu-Tsung; Chang, Hsiao-Ping

2012-07-01

The purpose of this study is to examine why both parties (industry and consumer market) have mutual interests in protecting the environment but they still are hesitant to act green. The study used two-stage sampling from consumer market to depict ideal green product characteristics and reliable toy companies, and visit these companies for the second sample collection to examine whether the organizational eco-innovation strategy with customer value has a positive effect on green product development. In other words, the customer's benefit is an important factor for new product development strategy for green toys. This research shows that the willingness to buy green toys increases if most people in society buy green toys. This represents that customers are environmentally conscious and care about protecting the environment, or buying green toys is the result of a new economic trend and childhood education. The willingness to buy green toys increases if customers think that green products implies an enhancement on new product development to toy manufacturers. Further, if manufacturers are able to manage the difficulty of cooperation with all parties in the supply chain and difficulties related to production, they are willing to adopt customers' perceived value on green toys for their new product development strategy. It is rare to find academic research discussing the perspectives of both consumers and manufacturers in the same study because the research topic is very broad and many conditions must be considered. This research aims to find the effect of consumer-perceived value and company eco-innovation on green product development.

Influence of Environmental Conditions in Ichthyophthiriasis Trigger to the Europeans Catfish Juveniles (Silurus Glanis Stocked into a Production System with Partially Reused Water

Directory of Open Access Journals (Sweden)

Sandita (Placinta Ion

2011-10-01

Full Text Available Currently, in Romanian aquaculture, the rearing of the European catfish into intensive production systems raises a growing interest determined by its higher technological performances. In comparison with pond traditional aquaculture, the new farming systems are characterized by modified environmental conditions that may lead, in case of exceeding thresholds of tolerability, to occurrence of stress factors, thus setting the disease conditions. From this perspective, the purpose of this paper is to present the association circumstances of the predisposed environmental conditions that have weakened the fish body resistance promoting the pathological action of Ichthyophthirius multifiliis after the transfer of European catfish juveniles (G=33.6±1.7 g, L=17.5±2.9 cm from a pond system into a tank culture system with partially reused water. During a 21-day period, some restrictive parameters of water quality have registered values far beyond the optimum interval for wells juveniles growth (t≤16oC, CmaxN-NH4+=3.62mg/l, CmaxNO2-=9.18mg/l, CmaxCl2=0.1mg/l which caused the appearance of some characteristic symptoms, such as the gills brown coloration, masking the first symptoms of ichthyophthiriasis and contributing to the subclinical evolution of the disease. The concentrations of water chemical parameters were determined by spectrophotometer methods using Merck kits, analogous to standard methods. Subsequently, the “ich” diagnosis was confirmed by microscopic examination of the gills and skin scrapings highlighting the presence of parasites. In order to alleviate methaemoglobinaemia and parasite treatment, sodium chloride was gradually added in water till 1 ppt concentration. Maintaining the salinity of the system led to a reduction of gills parasitic intensity, while mature trophonts encapsulated in the skin were protected by mucus hypersecretion. Finally, the destruction of gill epithelium seriously affected the osmoregulation

Hydropower Production and Fish Habitat Suitability: Impact and Effectiveness of Environmental Flow Prescriptions

Science.gov (United States)

Castellarin, A.; Galeati, G.; Ceola, S.; Pugliese, A.; Ventura, M.; Montanari, A.

2017-12-01

The anthropogenic alteration of the natural flow regime of a river for hydropower production can significantly modify the processes and functions associated with fluvial ecosystems. In order to preserve the fluvial habitat downstream of dams and diversion structures, environmental flows are commonly defined. Such environmental flows are generally computed from empirical methodologies, which are seldom based on site-specific studies, and may not be representative of local ecological and hydraulic conditions. Here we present the results of a quantitative analysis on the effectiveness of two alternative environmental flow scenarios prescribed in Central Italy (time-invariant experimental and empirically-based flow release versus time-variant hydrogeomorphologically-based flow release) and their impact on hydropower production and fish habitat suitability. The latter is examined by means of several models of habitat suitability curve, which is a well-known approach capable of analysing fluvial species preferences as a function of key eco-hydraulic features, such as water depth, flow velocity and river substrate. The results show an evident loss of hydropower production moving from the time-invariant experimental flow release to the hydrogeomorphological one (nearly 20% at the annual scale). Concerning the effects in terms of fish habitat suitability, our outcomes are less obvious, since they are species- and life stage-specific. The proposed analysis, which can be easily adapted to different riparian habitats and hydrological contexts, is a useful tool to guide the derivation of optimal water resource management strategies in order to ensure both hydropower production and fluvial ecosystem protection.

Environmental condition assessment of US military installations using GIS based spatial multi-criteria decision analysis.

Science.gov (United States)

Singer, Steve; Wang, Guangxing; Howard, Heidi; Anderson, Alan

2012-08-01

Environment functions in various aspects including soil and water conservation, biodiversity and habitats, and landscape aesthetics. Comprehensive assessment of environmental condition is thus a great challenge. The issues include how to assess individual environmental components such as landscape aesthetics and integrate them into an indicator that can comprehensively quantify environmental condition. In this study, a geographic information systems based spatial multi-criteria decision analysis was used to integrate environmental variables and create the indicator. This approach was applied to Fort Riley Military installation in which land condition and its dynamics due to military training activities were assessed. The indicator was derived by integrating soil erosion, water quality, landscape fragmentation, landscape aesthetics, and noise based on the weights from the experts by assessing and ranking the environmental variables in terms of their importance. The results showed that landscape level indicator well quantified the overall environmental condition and its dynamics, while the indicator at level of patch that is defined as a homogeneous area that is different from its surroundings detailed the spatiotemporal variability of environmental condition. The environmental condition was mostly determined by soil erosion, then landscape fragmentation, water quality, landscape aesthetics, and noise. Overall, environmental condition at both landscape and patch levels greatly varied depending on the degree of ground and canopy disturbance and their spatial patterns due to military training activities and being related to slope. It was also determined the environment itself could be recovered quickly once military training was halt or reduced. Thus, this study provided an effective tool for the army land managers to monitor environmental dynamics and plan military training activities. Its limitation lies at that the obtained values of the indicator vary and are

Indoor Environmental Conditions and Sanitary Practices in Selected ...

African Journals Online (AJOL)

Rapidly urbanizing cities are witnessing an increase in Day care centres (DCCs) whose environmental conditions are substandard. This scenario has negative consequences on the health of the DCC attendees and yet information on some of the indicators such as the level of sanitary practices is not adequately ...

Investigating the environmental costs of deteriorating road conditions in South Africa

CSIR Research Space (South Africa)

Mashoko, L

2014-07-01

Full Text Available the Environmental Costs of Deteriorating Road Conditions in South Africa L Mashoko, W L Bean*, W JvdM STEYN* CSIR, Built Environment, P O Box 395, Pretoria, 0001 Tel: 012 841-4466; Email: lmashoko@csir.co.za *University of Pretoria, Lynnwood Road, Hatfield..., Pretoria, 0002 Email: wilna.bean@up.ac.za and wynand.steyn@up.ac.za Corresponding Author: L Mashoko ABSTRACT The potential environmental impacts of deteriorating road conditions on logistics systems and the national economy have not received...

Elements in a new sustainable industrial culture - Environmental assessment in product development

DEFF Research Database (Denmark)

Alting, Leo; Hauschild, Michael Zwicky; Wenzel, Henrik

1997-01-01

In the last few years the environmental focus in the manufacturing industry has shifted from the manufacturing processes to the products themselves, as these are accountable for the environmental impacts in all life cycle phases. The paper describes for 3 industrial cases how a newly developed LCA...... methodology can assist the product developer in development of more environmentally friendly products. Finally, common experience gained will be discussed....

Quantifying the Sensitivity of the Production of Environmental Externalities to Market-Based Interventions in the Power Sector

Science.gov (United States)

Peer, R.; Sanders, K.

2017-12-01

The optimization function that governs the dispatching of power generators to meet electricity demand minimizes the marginal cost of electricity generation without regard to the environmental or public health damages caused by power production. Although technologies exist for reducing the externalities resulting from electricity generation at power plants, current solutions typically raise the cost of power production or introduce operational challenges for the grid. This research quantifies the trade-offs and couplings between the cooling water, greenhouse gas emissions, and air quality impacts of different power generating technologies under business as usual market conditions, as well as a series of market-based interventions aimed to reduce the production of those externalities. Using publicly available data from the US Environmental Protection Agency (EPA) and the US Energy Information Administration (EIA) for power plant water use and emissions, a unit commitment and dispatch power market simulation model is modified to evaluate the production of environmental externalities from power production. Scenarios are developed to apply a set of fees for cooling water, carbon dioxide, nitrous oxide and sulfur oxide emissions, respectively. Trade-offs between environmental performance, overall generation costs, and shifts in the power plants dispatched to meet demand are quantified for each power market simulation. The results from this study will provide insight into the development of a novel market-based framework that modifies the optimization algorithms governing the dispatching of electricity onto the grid in efforts to achieve cost-effective improvements in its environmental performance without the need for new infrastructure investments.

Environmental assessment of farm-scaled anaerobic co-digestion for bioenergy production

Energy Technology Data Exchange (ETDEWEB)

Lijó, Lucía, E-mail: lucia.lijo@usc.es [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain); González-García, Sara [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain); Bacenetti, Jacopo; Negri, Marco; Fiala, Marco [Department of Agricultural and Environmental Sciences, Production, Landscape, Agroenergy, University of Milan, Milan (Italy); Feijoo, Gumersindo; Moreira, María Teresa [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain)

2015-07-15

Highlights: • Anaerobic monodigestion and codigestion were compared. • The environmental advantages of suitable waste management were proved. • The use of cereal crops as feedstock improves biogas yield. • Cultivation step implies the most important environmental hotspot. • Digestate management options were evaluated. - Abstract: The aim of this study was to assess the environmental profile of a bioenergy system based on a co-digestion plant using maize silage and pig slurry as substrates. All the processes involved in the production of bioenergy as well as the avoided processes accrued from the biogas production system were evaluated. The results evidenced the environmental importance of the cultivation step and the environmental credits associated to the avoided processes. In addition, this plant was compared with two different plants that digest both substrates separately. The results revealed the environmental benefits of the utilisation of pig slurry due to the absence of environmental burdens associated with its production as well as credits provided when avoiding its conventional management. The results also presented the environmental drawbacks of the utilisation of maize silage due to the environmental burdens related with its production. Accordingly, the anaerobic mono-digestion of maize silage achieved the worst results. The co-digestion of both substrates was ranked in an intermediate position. Additionally, three possible digestate management options were assessed. The results showed the beneficial effect of digestate application as an organic fertiliser, principally on account of environmental credits due to avoided mineral fertilisation. However, digestate application involves important acidifying and eutrophicating emissions.

Environmental assessment of farm-scaled anaerobic co-digestion for bioenergy production

International Nuclear Information System (INIS)

Lijó, Lucía; González-García, Sara; Bacenetti, Jacopo; Negri, Marco; Fiala, Marco; Feijoo, Gumersindo; Moreira, María Teresa

2015-01-01

Highlights: • Anaerobic monodigestion and codigestion were compared. • The environmental advantages of suitable waste management were proved. • The use of cereal crops as feedstock improves biogas yield. • Cultivation step implies the most important environmental hotspot. • Digestate management options were evaluated. - Abstract: The aim of this study was to assess the environmental profile of a bioenergy system based on a co-digestion plant using maize silage and pig slurry as substrates. All the processes involved in the production of bioenergy as well as the avoided processes accrued from the biogas production system were evaluated. The results evidenced the environmental importance of the cultivation step and the environmental credits associated to the avoided processes. In addition, this plant was compared with two different plants that digest both substrates separately. The results revealed the environmental benefits of the utilisation of pig slurry due to the absence of environmental burdens associated with its production as well as credits provided when avoiding its conventional management. The results also presented the environmental drawbacks of the utilisation of maize silage due to the environmental burdens related with its production. Accordingly, the anaerobic mono-digestion of maize silage achieved the worst results. The co-digestion of both substrates was ranked in an intermediate position. Additionally, three possible digestate management options were assessed. The results showed the beneficial effect of digestate application as an organic fertiliser, principally on account of environmental credits due to avoided mineral fertilisation. However, digestate application involves important acidifying and eutrophicating emissions

Decomposition of Productivity Considering Multi-environmental Pollutants in Chinese Industrial Sector

OpenAIRE

Fujii, Hidemichi; Cao, Jing; Managi, Shunsuke

2015-01-01

The objective of this study is to calculate and decompose productivity incorporating multi-environmental pollutants in Chinese industrial sectors from 1992 to 2008. We apply a weighted Russell directional distance model to calculate productivity from both the economic and environmental performance. The main findings are: (1) Chinese industrial sectors increased productivity, with the main contributing factors being labor saving prior to 2000; (2) The main contributing factors for productivity...

Investigating the impact of environmental attitude on the decision to purchase a green product with the mediating role of environmental concern and care for green products

OpenAIRE

Esmaeilpour Majid; Bahmiary Elahe

2017-01-01

The intention to purchase green products is the tendency of a person who prefers to purchase a product with optimal environmental characteristics rather than usual products. Nowadays, the environment is very important and maintaining it is a vital issue for all groups of people, whether in the customer's position or in the distributor’s position. However, in spite of the increased environmental awareness among consumers and encouragements made by producers for them to buy green products, we r...

Parameters for assessing the aquatic environmental impact of cosmetic products.

Science.gov (United States)

Vita, N A; Brohem, C A; Canavez, A D P M; Oliveira, C F S; Kruger, O; Lorencini, M; Carvalho, C M

2018-05-01

The cosmetic industry's growing concern about the impact of its supply chain on the environment, sustainability of raw materials, and biodiversity increases the need to ensure that the final product has a lower environmental impact. The objective of this review is to summarize and compare the information available from international organizations and legislation regarding the main criteria used to assess raw materials for aquatic toxicity, as well as the most suitable alternative methods for obtaining assessment parameters. Using the literature available in databases, a review of the scientific literature and international legislation, this work discusses and compares the parameters established by international organizations such as the Environmental Protection Agency (EPA) and Cradle to Cradle (C2C), as well as European legislation, namely, European Regulation 1272/2008, for assessing environmental impact. Defining the ecotoxicity parameters of the main classes of raw materials in rinse-off cosmetic products can enable the development of products that are more environmentally sustainable, prioritizing substances with less environmental impact. Copyright © 2018 Elsevier B.V. All rights reserved.

Enhancing Ethanol Production by Fermentation Using Saccharomyces cereviseae under Vacuum Condition in Batch Operation

Directory of Open Access Journals (Sweden)

A Abdullah

2012-02-01

Full Text Available Ethanol is one of renewable energy, which considered being an excellent alternative clean-burning fuel to replaced gasoline. In fact, the application of ethanol as fuel still blended with gasoline. The advantages of using ethanol as fuel are that the raw material mostly from renewable resources and the product has low emission which means environmental friendly. Ethanol can be produced by fermentation of sugars (glucose/fructose. The constraint in the ethanol fermentation batch or continuous process is the ethanol product inhibition. Inhibition in ethanol productivity and cell growth can be overcome by taking the product continuously from the fermentor. The process can be done by using a vacuum fermentation. The objective of this research is to investigate the effect of pressure and glucose concentration in ethanol fermentation. The research was conducted in laboratory scale and batch process. Equipment consists of fermentor with vacuum system. The observed responses were dried cells of yeast, concentration of glucose, and concentration of ethanol. Observations were made every 4 hours during a day of experiment. The results show that the formation of ethanol has a growth-associated product characteristic under vacuum operation. Vacuum condition can increase the cell formation productivity and the ethanol formation, as it is compared with fermentation under atmospheric condition. The maximum cells productivity and ethanol formation in batch operation under vacuum condition was reached at 166.6 mmHg of pressure. The maximum numbers of cells and ethanol formation was reached at 141.2 mm Hg of pressure. High initial glucose concentration significantly can affect the productivity and the yield of ethanol.

Degradation of the tricyclic antipsychotic drug chlorpromazine under environmental conditions, identification of its main aquatic biotic and abiotic transformation products by LC-MSn and their effects on environmental bacteria.

Science.gov (United States)

Trautwein, Christoph; Kümmerer, Klaus

2012-03-15

The search for environmental transformation products of organic pollutants (like drugs) is a difficult task and usually only few compounds are detected. This might be due to effective degradation but could also be a result of analytical deficits dealing with complex matrices. Especially transformation products of very low concentrations in sludge were difficult to identify so far. Additionally, the use of standard separation techniques might lead to the loss of isomeric compounds, which possess identical spectroscopic and spectrometric properties. To date no complete study investigating the environmental fate of any tricyclic antipsychotic drug has been reported. Therefore, this study investigated the popular neuroleptic drug chlorpromazine and its potential transformation by all main environmental pathways: aerobic and anaerobic biodegradation as well as abiotic photolytic degradation by sunlight. Analysis of test samples by high performance liquid chromatography coupled to multiple stage mass-spectrometry (HPLC-MS(n)) allowed the detection of numerous compounds. Further, the use of a special software allowed distinguishing between transformation products of small intensities and background "noise" caused by sludge or matrix. Three aerobic tests of different bacterial density (the Closed Bottle test, OECD 301D; the Manometric Respiratory test, OECD 301F; the modified Zahn-Wellens test, 302B; one anaerobic test (a modified anaerobic degradation test according to ISO 11734) as well as a photodegradation test were performed in the present study. According to the individual test guidelines, chlorpromazine had to be classified as not biodegradable in all of the biodegradation tests. However, a special chromatographic column and gradient along with mass spectrometric fragmentation experiments of higher order uncovered the presence of a total of 61 abiotic and biotic transformation products which where formed during the course of the tests. The structures of three

Impact of Environmental Regulation on Productivity: Case Studies of Three Industries in Japan

OpenAIRE

Chalermthanakom, Adisak; Ueta, Kazuhiro

2011-01-01

Although fi rms bear the cost of compliance, strict but fl exible environmental regulation may benefi t them by spurring the innovation process. However, the relationship between environmental regulation and productivity is unclear. We calculate productivity growth by using data envelopment analysis; we then conduct regression analysis, using panel data on productivity growth by environmental regulation stringency. A one-year lag of environmental regulation stringency is included in the model...

Examining the Extent of Environmental Compliance Requirements on Mechatronic Products and Their Implementation through Product Lifecycle Management

Science.gov (United States)

Jovanovic, Vukica

2010-01-01

The present mixed-methods study examined the opinions of industry practitioners related to the implementation of environmental compliance requirements into design and manufacturing processes of mechatronic and electromechanical products. It focused on the environmental standards for mechatronic and electromechanical products and how Product…

Effects of repository conditions on environmental impact reduction by recycling

International Nuclear Information System (INIS)

Ahn, Joonhong

2010-01-01

The environmental impacts (EI) of high-level wastes (HLW) disposed of in a water-saturated repository (WSR) and in the Yucca Mountain Repository (YMR) for various fuel cycle cases have been evaluated and compared to observe the difference in the recycling effects for differing repository conditions. With the impacts of direct spent fuel disposal in each repository as the reference level, separation of actinides by Urex+ and borosilicate vitrification clearly reduces the environmental impacts of YMR, while separation by Purex and borosilicate vitrification would not necessarily reduce the environmental impact of WSR. (authors)

Sudden changes in environmental conditions do not increase invasion risk in grassland

Science.gov (United States)

Ruprecht, Eszter; Fenesi, Annamária; Nijs, Ivan

2013-02-01

After direct habitat transformation, biological invasions are considered to be the second most important threat to biodiversity. A better understanding of the factors affecting invasion success in new areas is crucial, and may provide insight into potential control actions. We hypothesized that invasion risk increases in habitats undergoing a sudden change in the disturbance regime or environmental conditions. For testing this assumption we initiated a seed sowing experiment while introducing two novel treatments, mowing twice and fertilizer application, in two grassland sites (one dryer and one mesic) in Romania. The seeds of two invasive species, Solidago canadensis and Rudbeckia laciniata, and two resident natives of similar seed sizes, life-forms and strategies were sowed in treated and control plots, and seed germination, seedling establishment and growth were followed during four months. Contrary to our expectations, there was no difference in the treatment effects on seed germination and seedling establishment between species, while there was on seedling vigour of the larger seeded species in the dryer grassland site, where the native had a higher performance especially in increased nutrient conditions. Indifferently from applied treatments, invasive species had greater cumulative germination in the mesic site, while natives were far more successful in seedling establishment in the drier site. At the same time, seed size was found to be a very important factor explaining germination and establishment success, with large seeded species outperforming small seeded species in any circumstances. Our results call the attention upon management interventions in mesic, productive grassland sites opening colonization windows for the recruitment of those invasive species of which ecological requirements correspond to local environmental conditions.

Polluting Production - Environmentally Sound Alternatives

OpenAIRE

Tamás Kocsis

2002-01-01

With the determination of principal parameters of producing and pollution abatement technologies, this paper quantifies abatement and external costs at the social optimum and analyses the dynamic relationship between technological development and the above-mentioned costs. With the partial analysis of parameters, the paper presents the impacts on the level of pollution and external costs of extensive and intensive environmental protection, market demand change and product fees, and not enviro...

Environmental impacts from Danish fish products

DEFF Research Database (Denmark)

Thrane, Mikkel

This dissertation presents an assessment of the environmental impacts from Danish fish products in a life cycle perspective (from sea to table). The assessment is carried out in three steps ? and includes a MECO analysis, a quantitative LCA and a qualitative LCA. The results are used to discuss...... current environmental policies addressing the fishery, landing and auction, the fish processing industry, wholesale, transport, retail, and use.It is concluded that considerable improvement potentials exist in the fishing stage, which also represents the largest environmental impact potential compared....... It is suggested that passive and semi-active fishing methods such as Danish seine, purse seine, gillnet and long line represent a significant improvement potential compared to trawl. And it is shown that the energy consumption can be reduced with a factor 15 by substituting beam trawl with Danish seine...

Study of environmental concerns: offshore oil and gas drilling and production

Energy Technology Data Exchange (ETDEWEB)

Baker, R

1978-01-01

Material on the environmental concerns associated with offshore drilling and production activities has been synthesized with Department of Fisheries and Environment files on specific projects, these being the primary information source. Recommendations to resolve these concerns have also been provided. Most of the environmental concerns identified in this study are traceable to specific weaknesses in offshore drilling and production procedures and management systems. Hardware weaknesses are seldom of central importance. Areas of concern include the gradual deposition of pollutants from rigs, underwater pipelines and onshore ancillary structures, and the quality of the following: action plans to deal with oil spills, standards for safety and anti-pollution equipment, information provided on the environmental hazards in offshore drilling and production areas, environmental impact assessments, and communication links between those having environmental concerns and expertise (including the public-at-large) and those who make the decisions regarding offshore oil and gas development.

The environmental impacts of foamed concrete production and exploitation

Science.gov (United States)

Namsone, E.; Korjakins, A.; Sahmenko, G.; Sinka, M.

2017-10-01

This paper presents a study focusing on the environmental impacts of foamed concrete production and exploitation. CO2 emissions are very important factor for describing durability and sustainability of any building material and its life cycle. The building sector is one of the largest energy-consuming sectors in the world. In this study CO2 emissions are evaluated with regard to three types of energy resources (gas, coal and eco-friendly fuel). The related savings on raw materials are up to 120 t of water per 1000 t of traditionally mixed foamed concrete and up to 350 t of sand per 1000 t of foamed concrete produced with intensive mixing technology. In addition, total reduction of CO2 emissions (up to 60 t per 1000 m3 of material) and total energy saving from introduction of foamed concrete production (depending on the type of fuel) were calculated. In order to analyze the conditions of exploitation, both thermal conductivity and thickness of wall was determined. All obtained and calculated results were compared to those of the commercially produced autoclaved aerated concrete.

USDA Foreign Agricultural Service overview for operational monitoring of current crop conditions and production forecasts.

Science.gov (United States)

Crutchfield, J.

2016-12-01

The presentation will discuss the current status of the International Production Assessment Division of the USDA ForeignAgricultural Service for operational monitoring and forecasting of current crop conditions, and anticipated productionchanges to produce monthly, multi-source consensus reports on global crop conditions including the use of Earthobservations (EO) from satellite and in situ sources.United States Department of Agriculture (USDA) Foreign Agricultural Service (FAS) International Production AssessmentDivision (IPAD) deals exclusively with global crop production forecasting and agricultural analysis in support of the USDAWorld Agricultural Outlook Board (WAOB) lockup process and contributions to the World Agricultural Supply DemandEstimates (WASE) report. Analysts are responsible for discrete regions or countries and conduct in-depth long-termresearch into national agricultural statistics, farming systems, climatic, environmental, and economic factors affectingcrop production. IPAD analysts become highly valued cross-commodity specialists over time, and are routinely soughtout for specialized analyses to support governmental studies. IPAD is responsible for grain, oilseed, and cotton analysison a global basis. IPAD is unique in the tools it uses to analyze crop conditions around the world, including customweather analysis software and databases, satellite imagery and value-added image interpretation products. It alsoincorporates all traditional agricultural intelligence resources into its forecasting program, to make the fullest use ofavailable information in its operational commodity forecasts and analysis. International travel and training play animportant role in learning about foreign agricultural production systems and in developing analyst knowledge andcapabilities.

Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

Directory of Open Access Journals (Sweden)

Feng Tao

2012-01-01

Full Text Available The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

Industry efficiency and total factor productivity growth under resources and environmental constraint in China.

Science.gov (United States)

Tao, Feng; Li, Ling; Xia, X H

2012-01-01

The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

Science.gov (United States)

Tao, Feng; Li, Ling; Xia, X. H.

2012-01-01

The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity. PMID:23365517

Not in Your Backyard? Selective Tariff Cuts for Environmentally Preferable Products

OpenAIRE

Estelle, Gozlan; Ramos, Maria Priscila

2007-01-01

Current negotiations at the WTO’s Committee on Trade and Environment have made it conceivable that WTO members agree on selective tariff cuts for certain Environmentally Preferable Products, in an attempt to combine gains from trade and from cleaner production/consumption. This raises questions on the environmental and welfare implications of trade policy when a close substitute (“environmentally worse") exists. Using a simple partial equilibrium model with two substitutable goods ('green' an...

New prospects in EU environmental policies. The Integrated Product Policy (IPP)

International Nuclear Information System (INIS)

Carnimeo, G.; Iraldo, F.

2000-01-01

The Integrated Product Policy - IPP - is becoming one of the top priorities for the European Commission within the framework of the product-oriented environmental policies. Rather than a new policy, this is an innovative approach aimed at co-originated existing and forthcoming environmental policies, in order to manage in an integrated way and minimise the impacts connected with the whole product life-cycle. The underlying life-cycle guideline requires the management of each phase by considering what happens in all the other phases. What clearly emerges from a research carried out by Iefe Bocconi is, on the one hand, the effectiveness of co-operation and networking between all the actors involved in the product environmental management within the different phases of its life cycle (policy makers, producers, retailers, consumers, NGOs, etc.) and, on the other, the opportunity of developing an integrated management of both environmental policy instruments and corporate management tools [it

Application of Whole Genome Expression Analysis to Assess Bacterial Responses to Environmental Conditions

Science.gov (United States)

Vukanti, R. V.; Mintz, E. M.; Leff, L. G.

2005-05-01

Bacterial responses to environmental signals are multifactorial and are coupled to changes in gene expression. An understanding of bacterial responses to environmental conditions is possible using microarray expression analysis. In this study, the utility of microarrays for examining changes in gene expression in Escherichia coli under different environmental conditions was assessed. RNA was isolated, hybridized to Affymetrix E. coli Genome 2.0 chips and analyzed using Affymetrix GCOS and Genespring software. Major limiting factors were obtaining enough quality RNA (107-108 cells to get 10μg RNA)and accounting for differences in growth rates under different conditions. Stabilization of RNA prior to isolation and taking extreme precautions while handling RNA were crucial. In addition, use of this method in ecological studies is limited by availability and cost of commercial arrays; choice of primers for cDNA synthesis, reproducibility, complexity of results generated and need to validate findings. This method may be more widely applicable with the development of better approaches for RNA recovery from environmental samples and increased number of available strain-specific arrays. Diligent experimental design and verification of results with real-time PCR or northern blots is needed. Overall, there is a great potential for use of this technology to discover mechanisms underlying organisms' responses to environmental conditions.

Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

DEFF Research Database (Denmark)

Kjær, Louise Laumann; Høst-Madsen, Niels Karim Høst-Madsen; Schmidt, Jannick H.

2015-01-01

An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO) database...... as a basis for corporate and product environmental footprint accounts, including the entire supply chain. We present three cases, where this approach was applied. Case study 1 describes the creation of total corporate carbon footprint accounts for three Danish regional healthcare organisations. In case study...... a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results...

Conditions of bids relative to the electric power installations from biomass; Conditions de l'appel d'offres portant sur les installations de production d'electricite a partir de biomasse

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The conditions concern the energy and technical characteristics of the installations (primary energy, implementation region, part of the renewable energy, techniques of the electric power production, energy efficiency), the economical and financial conditions (connection, prices, involvement of the candidate), delay and industrial commissioning, weighting and prioritization principles, the nature of the resource, the environmental impact and the weighting criteria. (A.L.B.)

Illustrating Environmental Issues by Using the Production-Possibility Frontier: A Classroom Experiment

Science.gov (United States)

Carson, Nancy; Tsigaris, Panagiotis

2011-01-01

The authors develop a new classroom experimental game to illustrate environmental issues by using the production-possibility frontier in an introductory economics course. Waste evolves as a byproduct of the production of widgets. Environmental cleanup is produced by reallocating scarce resources away from the production of the dirty good. In…

The growth response of plants to elevated CO2 under non-optimal environmental conditions

NARCIS (Netherlands)

Poorter, H.; Pérez-Soba, M.

2001-01-01

Under benign environmental conditions, plant growth is generally stimulated by elevated atmospheric CO2 concentrations. When environmental conditions become sub- or supra-optimal for growth, changes in the biomass enhancement ratio (BER; total plant biomass at elevated CO2 divided by plant biomass

Environmental assessment of electrochromic glazing production

International Nuclear Information System (INIS)

Syrrakou, E.; Papaefthimiou, S.; Yianoulis, P.

2005-01-01

The life cycle analysis method was used to determine the environmental impacts associated with the production of an electrochromic (EC) glazing (called ECD). This paper describes the inventory analysis for all the basic materials used during the manufacture of the ECD, i.e. K-Glass, tungsten oxide (WO 3 ), poly-methyl methacrylate (PMMA), propylene carbonate (PC), lithium perchlorate (LiClO 4 ) and acetic silicone sealant. K-Glass, PC and PMMA account for the 98% of the total device mass and the CO 2 emissions during their production processes are 810 g. The total embodied energy was estimated to be 49 MJ/ECD, with 32.1 MJ/unit of them derived from the K-Glass. The comparison of the total embodied energies of the ECD and various insulating glass units concluded that mass-produced EC glazings could easily compete with them in terms of environmental performance, anticipating cost attenuation and overall thermal and optical behavior. The above analysis could be implemented for the reduction of the embodied energy of the ECD life cycle, since it is proposed as an energy saving device. (Author)

Biomass feedstock production systems: economic and environmental benefits

Science.gov (United States)

Mark D. Coleman; John A. Stanturf

2006-01-01

The time is ripe for expanding bioenergy production capacity and developing a bio-based economy. Modern society has created unprecedented demands for energy and chemical products that are predominately based on geologic sources. However, there is a growing consensus that constraints on the supply of petroleum and the negative environmental consequences of burning...

Ebola Virus Stability Under Hospital and Environmental Conditions.

Science.gov (United States)

Westhoff Smith, Danielle; Hill-Batorski, Lindsay; N'jai, Alhaji; Eisfeld, Amie J; Neumann, Gabriele; Halfmann, Peter; Kawaoka, Yoshihiro

2016-10-15

The West African outbreak of Ebola virus (EBOV) is largely contained, but sporadic new cases continue to emerge. To assess the potential contribution of fomites to human infections with EBOV, we tested EBOV stability in human blood spotted onto Sierra Leonean banknotes and in syringe needles under hospital and environmental conditions. Under some of these conditions, EBOV remained infectious for >30 days, indicating that EBOV-contaminated items may pose a serious risk to humans. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

Soil physical conditions in Nigerian savannas and biomass production

International Nuclear Information System (INIS)

Salako, F.K.

2004-01-01

Nigeria is located in the tropical zone, with a vast area having savanna vegetation. This is a region that is itself diverse, necessitating a classification into derived savanna, southern Guinea savanna and northern Guinea savanna. These classifications reflect environmental characteristics such as length of growing period, which for instance is 151-180 days for the northern Guinea savanna, 181-210 days for the southern Guinea savanna and 211-270 days for the derived savanna/coastal savanna. The major soils found in the various agro-ecological zones have coarse-textured surface soil, and are low in organic matter and chemical fertility. Although, yields can be improved by addition of inorganic and organic fertilizer, this can only be sustained and assured with high soil physical qualities. Soil physical qualities can be sustained at a high level with conservation tillage and soil conservation measures. Tillage is physical manipulation of the soil. Thus, the most profound effect of tillage is in relation to soil physical properties. For socio-economic and cultural reasons, manual tillage is still widely practiced in Africa as farming is largely at subsistence level. However, there are now a number of commercial farms especially for cash crop production in many parts of Africa. Many of these are located in locations which were hitherto reserved as forest and a need for sustainable production in pertinent to maintain ecological balance. Soils with coarse texture are not often sensitive to some physical parameters while some physical parameters are more relevant in a given study than others. Sustainable crop production researches in the tropics have focused on the role of planted fallows and their spatial arrangement (e.g., as in alley cropping) for many decades. Application of soil physics in the area of food production and environmental management still lags behind other sub-disciplines of soil science, particularly soil fertility in the tropics. A great challenge is

Consumer Purchase Behaviour Toward Environmentally Friendly Products in Japan

OpenAIRE

Udo, Miyako

2007-01-01

This study considers consumer purchase behaviour toward environmentally friendly products in Japan and focuses on factors which can influence environmentally responsible purchase decision making. The modified theory of planned behaviour based on previous research in the area of environmentally responsible purchase behaviour and ethical purchase decision making is applied to examine factors affecting the purchase decision making and key findings from the present study are highlighted. It can b...

Environmental impacts of Proalcool: production and consumption

International Nuclear Information System (INIS)

Magrini, A.; Nassi, C.D.; Barcellos, P.P.

1992-01-01

The environmental impacts caused by the Programa Nacional do Alcool -PROALCOOL - Brazil, are analysed. Rio de Janeiro and Sao Paulo States are studied, comparing the regional differences. The production and the consumption phases are analysed separately. (L.J.C.)

Cyclic electron flow provides acclimatory plasticity for the photosynthetic machinery under various environmental conditions and developmental stages

Directory of Open Access Journals (Sweden)

Marjaana eSuorsa

2015-09-01

Full Text Available Photosynthetic electron flow operates in two modes, linear and cyclic. In cyclic electron flow (CEF, electrons are recycled around photosystem I. As a result, a transthylakoid proton gradient (ΔpH is generated, leading to the production of ATP without concomitant production of NADPH, thus increasing the ATP/NADPH ratio within the chloroplast. At least two routes for CEF exist: a PGR5-PGRL1–and a chloroplast NDH-like complex mediated pathway. This review focuses on recent findings concerning the characteristics of both CEF routes in higher plants, with special emphasis paid on the crucial role of CEF in under challenging environmental conditions and developmental stages.

Monitoring of transcriptional regulation in Pichia pastoris under protein production conditions

Directory of Open Access Journals (Sweden)

Bhattacharyya Anamitra

2007-06-01

Full Text Available Abstract Background It has become evident that host cells react to recombinant protein production with a variety of metabolic and intrinsic stresses such as the unfolded protein response (UPR pathway. Additionally, environmental conditions such as growth temperature may have a strong impact on cell physiology and specific productivity. However, there is little information about the molecular reactions of the host cells on a genomic level, especially in context to recombinant protein secretion. For the first time, we monitored transcriptional regulation of a subset of marker genes in the common production host Pichia pastoris to gain insights into the general physiological status of the cells under protein production conditions, with the main focus on secretion stress related genes. Results Overexpression of the UPR activating transcription factor Hac1p was employed to identify UPR target genes in P. pastoris and the responses were compared to those known for Saccharomyces cerevisiae. Most of the folding/secretion related genes showed similar regulation patterns in both yeasts, whereas genes associated with the general stress response were differentially regulated. Secretion of an antibody Fab fragment led to induction of UPR target genes in P. pastoris, however not to the same magnitude as Hac1p overproduction. Overexpression of S. cerevisiae protein disulfide isomerase (PDI1 enhances Fab secretion rates 1.9 fold, but did not relief UPR stress. Reduction of cultivation temperature from 25°C to 20°C led to a 1.4-fold increase of specific product secretion rate in chemostat cultivations, although the transcriptional levels of the product genes (Fab light and heavy chain were significantly reduced at the lower temperature. A subset of folding related genes appeared to be down-regulated at the reduced temperature, whereas transcription of components of the ER associated degradation and the secretory transport was enhanced. Conclusion Monitoring of

Environmental policy and the energy efficiency of vertically differentiated consumer products

International Nuclear Information System (INIS)

Brzeskot, Magdalena; Haupt, Alexander

2013-01-01

We analyse optimal environmental policies in a market that is vertically differentiated in terms of the energy efficiency of products. Considering energy taxes, subsidies to firms for investment in more eco-friendly products, and product standards, we are particularly interested in how distributional goals in addition to environmental goals shape the choice of policy instruments. We find that an industry-friendly government levies an energy tax to supplement a lax product standard, but shies away from subsidies to firms. By contrast, a consumer-friendly government relies heavily on a strict product standard and additionally implements a moderate subsidy to firms, but avoids energy taxes. - Highlights: ► We analyse how distributional goals shape environmental policy. ► Firms invest in the energy efficiency of their products and compete in prices. ► An industry-friendly government implements an energy tax and a lax product standard. ► A consumer-friendly government chooses a subsidy to firms instead of an energy tax. ► A consumer-friendly government implements a strict energy efficiency standard

Enhancing Ethanol Production by Fermentation Using Saccharomyces cereviseae under Vacuum Condition in Batch Operation

Directory of Open Access Journals (Sweden)

A Abdullah

2012-04-01

Full Text Available Ethanol is one of renewable energy, which considered being an excellent alternativeclean-burning fuel to replaced gasoline. In fact, the application of ethanol as fuel still blended withgasoline. The advantages of using ethanol as fuel are that the raw material mostly from renewableresources and the product has low emission which means environmental friendly. Ethanol can beproduced by fermentation of sugars (glucose/fructose. The constraint in the ethanol fermentationbatch or continuous process is the ethanol product inhibition. Inhibition in ethanol productivityand cell growth can be overcome by taking the product continuously from the fermentor. Theprocess can be done by using a vacuum fermentation. The objective of this research is toinvestigate the effect of pressure and glucose concentration in ethanol fermentation. The researchwas conducted in laboratory scale and batch process. Equipment consists of fermentor withvacuum system. The observed responses were dried cells of yeast, concentration of glucose, andconcentration of ethanol. Observations were made every 4 hours during a day of experiment. Theresults show that the formation of ethanol has a growth-associated product characteristic undervacuum operation. Vacuum condition can increase the cell formation productivity and the ethanolformation, as it is compared with fermentation under atmospheric condition. The maximum cellsproductivity and ethanol formation in batch operation under vacuum condition was reached at166.6 mmHg of pressure. The maximum numbers of cells and ethanol formation was reached at141.2 mm Hg of pressure. High initial glucose concentration significantly can affect the productivityand the yield of ethanol.

Danish experience with the EDIP tool for environmental design of industrial products

DEFF Research Database (Denmark)

Wenzel, Henrik; Alting, Leo

1999-01-01

Since its publication in, 1996, the Danish method and tools for the environmental design of industrial products (EDIP) have been used in companies in Denmark and abroad, and experience has been gained with a variety of product categories such as electronics, electromechanical products, furniture......, foodstuffs, packaging, textiles, building equipment, energy systems and railway systems. The experience shows that large environmental improvement potentials can be found in all product categories. As a broad average, 30-50% environmental improvement of products have been implemented over few years...... by companies working with the EDIP tools. The paper presents examples from pumps, refrigerator, high pressure cleaners audio/video products, book shelves and moulded cardboards. A questionnaire investigation of the experience with life cycle assessment (LCA) and ecodesign within the Danish pioneer companies...

ORGANIC PRODUCTION OF SHEEP MILK

Directory of Open Access Journals (Sweden)

Juan Carlos Ángeles Hernández

2014-04-01

Full Text Available Organic production systems are based on natural processes, leveraging local resources and decreasing in soil degradation. Effectiveness of milk production of organic systems vs. conventional production systems is a subject open to debate. There are various studies in which there is a positive effect of organic systems in relation to the welfare and animal health, product quality and environmental impact. However, some authors report lower milk yields production and increased susceptibility to environmental conditions compared with those obtained in conventional systems. The lower milk yields in organic systems in Dairy sheep's production, are related to the limited nutritional value, low genetic potential, and the changing environmental conditions. These systems are mainly a production method for a specific market with premium quality products and high standards in their production processes. Thus, a company organic Dairy sheep production should be considered viable when present a positive global sustainability level, that is socially beneficial, economically viable and environmentally responsible.

Maintaining environmental quality while expanding biomass production: Sub-regional U.S. policy simulations

International Nuclear Information System (INIS)

Egbendewe-Mondzozo, Aklesso; Swinton, Scott M.; Izaurralde, R. César; Manowitz, David H.; Zhang, Xuesong

2013-01-01

This paper evaluates environmental policy effects on ligno-cellulosic biomass production and environmental outcomes using an integrated bioeconomic optimization model. The environmental policy integrated climate (EPIC) model is used to simulate crop yields and environmental indicators in current and future potential bioenergy cropping systems based on weather, topographic and soil data. The crop yield and environmental outcome parameters from EPIC are combined with biomass transport costs and economic parameters in a representative farmer profit-maximizing mathematical optimization model. The model is used to predict the impact of alternative policies on biomass production and environmental outcomes. We find that without environmental policy, rising biomass prices initially trigger production of annual crop residues, resulting in increased greenhouse gas emissions, soil erosion, and nutrient losses to surface and ground water. At higher biomass prices, perennial bioenergy crops replace annual crop residues as biomass sources, resulting in lower environmental impacts. Simulations of three environmental policies namely a carbon price, a no-till area subsidy, and a fertilizer tax reveal that only the carbon price policy systematically mitigates environmental impacts. The fertilizer tax is ineffectual and too costly to farmers. The no-till subsidy is effective only at low biomass prices and is too costly to government. - Highlights: ► Bioeconomic optimization model predicts how biomass production affects environment. ► Rising biomass production could impair climate and water quality. ► Environmental protection policies compared as biomass supply grows. ► Carbon price protects the environment cost-effectively as biomass supply expands

Federal Environmental Regulations Impacting Hydrocarbon Exploration, Drilling, and Production Operations

Energy Technology Data Exchange (ETDEWEB)

Carroll, Herbert B.; Johnson, William I.

1999-04-27

Waste handling and disposal from hydrocarbon exploration, drilling, and production are regulated by the US Environmental Protection Agency (EPA) through federal and state regulations and/or through implementation of federal regulations. Some wastes generated in these operations are exempt under the Resource Conservation and Recovery Act (RCRA) but are not exempt under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), Superfund Amendments and Reauthorization Act (SARA), and other federal environmental laws. Exempt wastes remain exempt only if they are not mixed with hazardous wastes or hazardous substances. Once mixture occurs, the waste must be disposed as a hazardous material in an approved hazardous waste disposal facility. Before the Clean Air Act as amended in 1990, air emissions from production, storage, steam generation, and compression facilities associated with hydrocarbon exploration, drilling, and production industry were not regulated. A critical proposed regulatory change which will significantly effect Class II injection wells for disposal of produced brine and injection for enhanced oil recovery is imminent. Federal regulations affecting hydrocarbon exploration, drilling and production, proposed EPA regulatory changes, and a recent significant US Court of Appeals decision are covered in this report. It appears that this industry will, in the future, fall under more stringent environmental regulations leading to increased costs for operators.

Assessing environmental consequences of using co-products in animal feed

NARCIS (Netherlands)

Zanten, van H.H.E.; Mollenhorst, H.; Vries, de J.W.; Middelaar, van C.E.; Kernebeek, van H.R.J.; Boer, de I.J.M.

2014-01-01

The livestock sector has a major impact on the environment. This environmental impact may be reduced by feeding agricultural co-products (e.g. beet tails) to livestock, as this transforms inedible products for humans into edible products, e.g. pork or beef. Nevertheless, co-products have different

Environmental impacts the of production and use of biodiesel.

Science.gov (United States)

Živković, Snežana; Veljković, Milan

2018-01-01

Biodiesel as renewable, environmental friendly, less toxic, and biodegradable is an attractive alternative to fossil fuels and is produced mainly from vegetable oils and animal fats. It is expected, globally, that the use of renewable biofuels, in general, will increase rapidly in the near future. The growing biodiesel production and usage have encouraged assessment of its impact on the environment. The present paper reviews various aspects of biodiesel production using commercial processing technology and biodiesel use through evaluation and analysis of the studies concerning environmental impacts of biodiesel. As a general conclusion, it can be said that biodiesel has the potential to offer a series of perceived benefits such as political, economical, and agricultural, as well as environmental (due to its biodegradability, less toxicity, renewability) and health (greenhouse gas-saving, less harmful exhaust emissions).

Environmental and production rights futures: a new booming market?

NARCIS (Netherlands)

Pennings, J.M.E.; Meulenberg, M.T.G.

1996-01-01

Governments or supranational organizations have begun to introduce environmental rights (such as sulfur dioxide or chlorofluorocarbon rights) and production rights (such as milk and fishery rights) to better link production process costs and results. The authors show that the characteristics of

Tolerances of microorganisms to extreme environmental conditions

International Nuclear Information System (INIS)

West, J.M.; Arme, S.C.

1985-03-01

Microbial isolates from sites relevant to the disposal of radioactive wastes have been subjected to extreme environmental conditions in order to ascertain their tolerance ability. Two groups were chosen, sulphate reducing bacteria and sulphur oxidising bacteria, because of their potential effects on waste containment. They have been subjected to high temperatures, pressures and radiation (delta-emissions) in optimal media conditions and their ability to tolerate the conditions has been ascertained by epifluorescence microscopy and adenosine tri-phosphate (ATP) analysis followed by 'culture-on' to assess post experimental viability. Results indicate that the sulphate reducers in general, are more tolerant to these conditions than the sulphur oxidisers, some proving to be thermophilic. The sulphate reducer showed increased growth rates, as determined by population numbers, at 50 0 C and survived at 80 0 C, 4,500 psig (310 bar) with no subsequent loss in viability. Gamma irradiation of this group and an isolate of 10 5 rad over 4 hours had no effect on population numbers or viability. Such resistances are not apparent with the sulphur oxidisers whose numbers decreased with increasing radiation dose and are destroyed with pressure. (author)

The Environmental Quality – Requirements for the Pro-active Approach of Production Enterprises

Directory of Open Access Journals (Sweden)

Beáta Stehlíková

2005-11-01

Full Text Available The interrelationship and cooperation of the Quality Management System, the Environmental Management System QMS, and Environmental Management System EMS in production enterprises has a very important impact to their performance. The synergic effect of two systems {QMS + EMS} created the so called POEMS Product and the Process Oriented Environmental Management System functioning for the benefit of the Company Profit, Customer Satisfaction, Product Competition, Environment and the Social Responsibility.

Environmental conditions influence tissue regeneration rates in scleractinian corals.

Science.gov (United States)

Sabine, Alexis M; Smith, Tyler B; Williams, Dana E; Brandt, Marilyn E

2015-06-15

Natural and anthropogenic factors may influence corals' ability to recover from partial mortality. To examine how environmental conditions affect lesion healing, we assessed several water quality parameters and tissue regeneration rates in corals at six reefs around St. Thomas, US Virgin Islands. We hypothesized that sites closer to developed areas would have poor water quality due to proximity to anthropogenic stresses, which would impede tissue regeneration. We found that water flow and turbidity most strongly influenced lesion recovery rates. The most impacted site, with high turbidity and low flow, recovered almost three times slower than the least impacted site, with low turbidity, high flow, and low levels of anthropogenic disturbance. Our results illustrate that in addition to lesion-specific factors known to affect tissue regeneration, environmental conditions can also control corals' healing rates. Resource managers can use this information to protect low-flow, turbid nearshore reefs by minimizing sources of anthropogenic stress. Copyright © 2015 Elsevier Ltd. All rights reserved.

Integrating environmental impact assessment into new product development and processing-technology selection

NARCIS (Netherlands)

Depping, Verena; Grunow, Martin; Middelaar, van Corina; Dumpler, Joseph

2017-01-01

Environmental-impact reduction potential is great early in new product development. To exploit this potential, this study evaluates novel combinations of existent processing technologies. Process engineering is combined with an environmental product assessment along the supply chain. In the dairy

The green entrepreneur's challenge : The influence of environmental ambition in new product development

NARCIS (Netherlands)

Berchicci, L.

2005-01-01

Studies dealing with environmental issues in New Product Development have made significant progress explaining how firms can develop greener new products that succeed in the market and Environmental New Product Development (ENPD) has become a wide-spread practice within an increasing number of

Updating of U.S. Wood Product Life-Cycle Assessment Data for Environmental Product Declarations

Science.gov (United States)

Richard Bergman; Elaine Oneil; Maureen Puettmann; Ivan Eastin; Indroneil Ganguly

2014-01-01

The marketplace has an increasing desire for credible and transparent product eco-labels based on life-cycle assessment (LCA) data, especially involving international trade. Over the past several years, stakeholders in the U.S. wood products industry have developed many such “eco-labels” under the ISO standard of LCA-based environmental product declarations (EPDs). The...

Modelling and optimization of environmental conditions for kefiran production by Lactobacillus kefiranofaciens.

Science.gov (United States)

Cheirsilp, B; Shimizu, H; Shioya, S

2001-12-01

A mathematical model for kefiran production by Lactobacillus kefiranofaciens was established, in which the effects of pH, substrate and product on cell growth, exopolysaccharide formation and substrate assimilation were considered. The model gave a good representation both of the formation of exopolysaccharides (which are not only attached to cells but also released into the medium) and of the time courses of the production of galactose and glucose in the medium (which are produced and consumed by the cells). Since pH and both lactose and lactic acid concentrations differently affected production and growth activity, the model included the effects of pH and the concentrations of lactose and lactic acid. Based on the mathematical model, an optimal pH profile for the maximum production of kefiran in batch culture was obtained. In this study, a simplified optimization method was developed, in which the optimal pH profile was determined at a particular final fermentation time. This was based on the principle that, at a certain time, switching from the maximum specific growth rate to the critical one (which yields the maximum specific production rate) results in maximum production. Maximum kefiran production was obtained, which was 20% higher than that obtained in the constant-pH control fermentation. A genetic algorithm (GA) was also applied to obtain the optimal pH profile; and it was found that practically the same solution was obtained using the GA.

Environmental impacts and cost estimation for electricity production

International Nuclear Information System (INIS)

Devezeaux de Lavergne, J.G.

2000-01-01

This article reviews the different sources of energy used for electricity production in the view of the impact on environment. Coal, gas, wind energy, nuclear energy and hydro-energy are considered. The comparison of environmental performances requires common methodologies, 2 methodologies have been used ACV (analysis of a complete life cycle) and IPM (impact pathway methodology), both study all the exchanges of a system with the outside. The environmental performance is quantified by a series of parameters which represent the degradation of ecosystems. These parameters are divided into 4 groups: i) impact on public health, ii) impact on staff health, iii) impact on regional environment (agriculture, landscape alteration...) and iv) global impact on environment (greenhouse effect, acid rain, waste production, reduction of resources...). (A.C.)

Environmental Product Development Combining the Life Cycle Perspective with Chemical Hazard Information

DEFF Research Database (Denmark)

Askham, Cecilia

in the design or redesign process. This thesis concerns marrying the life cycle perspective with chemical hazard information, in order to advance the practice of environmental product development, and hence takes further steps towards sustainable development. The need to consider the full value chain...... for the life cycle of products meant that systems theory and systems engineering principles were important in this work. Life cycle assessment methodology was important for assessing environmental impacts for case products. The new European regulation for chemicals (REACH) provided the main driver......Concerns regarding the short- and long-term detrimental effects of chemicals on human health and ecosystems have made the minimisation of chemical hazards a vitally important issue. If sustainable development is to be achieved, environmental efficient products (and product life cycles...

Implications of environmental regulations on refinery product specification, operation and investment

International Nuclear Information System (INIS)

Amin, M.M.

1992-01-01

During the 1980s, refiners mainly in OECD countries were occupied with improving their refinery configurations for producing high-value light products which would not only satisfy the product demand slate but also meet the increasingly restrictive environmental regulations. In the 1990s refiners will continue to be challenged to improve the world's air quality not only by producing products that minimize emissions of toxic and hazardous hydrocarbons, but also through the refinery operation itself by investment in upgrading the industry and products to cope with the constant flow of new regulations. These investments will not only be limited to consuming centres but will also be extended to cover exporting refineries as well due to competition of acquiring market shares for product exports. The additional cost will be directly related to product quality and site regulations and will vary from one country to the other. This paper deals mainly with the air pollution and the impact of related environmental issues on the refining industry. Environmental regulations for refinery products in the USA and Europe are examined and international regulations for the tanker industry are noted. (author)

Catalyst-Free Biodiesel Production Methods: A Comparative Technical and Environmental Evaluation

Directory of Open Access Journals (Sweden)

Oseweuba Valentine Okoro

2018-01-01

Full Text Available In response to existing global focus on improved biodiesel production methods via highly efficient catalyst-free high temperature and high pressure technologies, this study considered the comparative study of catalyst-free technologies for biodiesel production as an important research area. In this study, therefore, catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification and catalyst-free one step supercritical transesterification processes for biodiesel production have been evaluated via undertaking straight forward comparative energetic and environmental assessments. Energetic comparisons were undertaken after heat integration was performed since energy reduction has favourable effects on the environmental performance of chemical processes. The study confirmed that both processes are capable of producing biodiesel of high purity with catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification characterised by a greater energy cost than catalyst-free one step supercritical transesterification processes for an equivalent biodiesel productivity potential. It was demonstrated that a one-step supercritical transesterification for biodiesel production presents an energetically more favourable catalyst-free biodiesel production pathway compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. The one-step supercritical transesterification for biodiesel production was also shown to present an improved environmental performance compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. This is because of the higher potential environment impact calculated for the integrated subcritical lipid hydrolysis and supercritical esterification compared to the potential environment impact calculated for the supercritical transesterification process, when all material and energy flows are

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

Science.gov (United States)

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

Bio energy: Environment and Environmental Engineering

International Nuclear Information System (INIS)

Soma, Morten; Noreng, Katrina; Soerensen, Heidi; Teslo, Einar; Daehlen, Knut; Liodden, Ole Joergen; Wilhelmsen, Gunnar; Hohle, Erik Eid

2001-01-01

This is Chapter 5 of the book ''Bio energy - Environment, technique and market''. Its main sections are: (1) Environmental issues in the use of energy, (2) Environmental issues in the production of biomass, (3) Forestry, (4) Agriculture, (5) Environmental issues in fuel production and storage, (6) Environmental issues in combustion, (7) Environmental issues in using bio fuel, (8) Life cycle analyses, (9) Laws, regulations and norms for the use of bio fuel. Unlike the other sections, the one on laws is mostly concerned with Norwegian conditions

Oil and Gas Production, Environmental Health and Livelihood ...

African Journals Online (AJOL)

Oil and Gas Production, Environmental Health and Livelihood Vulnerability in the West Coast of Ghana. ... African Journal of Sustainable Development ... Respondents' level of education significantly influences their level of knowledge about ...

Uranium production and environmental restoration at Priargunsky Centre (Russian Federation)

International Nuclear Information System (INIS)

Shatalov, V.V.; Boitsov, A.V.; Nikolsky, A.L.; Chernigov, V.G.; Ovseichuk, V.A.

2002-01-01

The state enterprise 'Priargunsky Mining and Chemical Production Association' (PPGHO) is the only active uranium production centre in Russia in last decade. Mining has been operated since 1968 by two open pits and four underground mines. It is based on resources of 19 volcanic-type deposits of Streltsovsk U-ore region situated at the area of 150 km 2 . Milling and processing has been carried out since 1974 at the local hydrometallurgical plant. Since the mid 1980s, limited amount of uranium is produced by heap and block leaching methods. High level of total production marks PPGHO as one of the outstanding uranium production centers worldwide. Significant amount of solid, liquid and gas wastes have been generated for more than 30 years. The principal environmental contamination comes from waste rock piles, mine water and tailing ponds. Liquid waste seepage through tailing pond bed can essentially contaminate underground waters. The principal environmental remediation activities are: waste rock dumps and open pits rehabilitation; waste rock utilization for industrial needs; heap and block leaching mining development, strengthening dam bodies and construction intercepting wells below the tailing pond dam, hydrogeological monitoring, upgrade of mine water treatment unit. Waste is being managed by the environmental service team of PPGHO. Environmental restoration activities, including rehabilitation of the territories and waste utilization, are implemented gradually in line with decommissioning of enterprise's particular facilities. (author)

Fusarium graminearum in Stored Wheat: Use of CO₂ Production to Quantify Dry Matter Losses and Relate This to Relative Risks of Zearalenone Contamination under Interacting Environmental Conditions.

Science.gov (United States)

Garcia-Cela, Esther; Kiaitsi, Elsa; Sulyok, Michael; Medina, Angel; Magan, Naresh

2018-02-17

Zearalenone (ZEN) contamination from Fusarium graminearum colonization is particularly important in food and feed wheat, especially during post-harvest storage with legislative limits for both food and feed grain. Indicators of the relative risk from exceeding these limits would be useful. We examined the effect of different water activities (a w ; 0.95-0.90) and temperature (10-25 °C) in naturally contaminated and irradiated wheat grain, both inoculated with F. graminearum and stored for 15 days on (a) respiration rate; (b) dry matter losses (DML); (c) ZEN production and (d) relationship between DML and ZEN contamination relative to the EU legislative limits. Gas Chromatography was used to measure the temporal respiration rates and the total accumulated CO₂ production. There was an increase in temporal CO₂ production rates in wetter and warmer conditions in all treatments, with the highest respiration in the 25 °C × 0.95 a w treatments + F. graminearum inoculation. This was reflected in the total accumulated CO₂ in the treatments. The maximum DMLs were in the 0.95 a w /20-25 °C treatments and at 10 °C/0.95 a w . The DMLs were modelled to produce contour maps of the environmental conditions resulting in maximum/minimum losses. Contamination with ZEN/ZEN-related compounds were quantified. Maximum production was at 25 °C/0.95-0.93 a w and 20 °C/0.95 a w . ZEN contamination levels plotted against DMLs for all the treatments showed that at ca 1.0% DML, the risk was high. This type of data is important in building a database for the development of a post-harvest decision support system for relative risks of different mycotoxins.

Optical And Environmental Properties Of NCAP Glazing Products

Science.gov (United States)

van Konynenburg, Peter; Wipfler, Richard T.; Smith, Jerry L.

1989-07-01

The first large area, commercially available, electrically-controllable glazing products sold under the tradename VARILITETM are based on a new liquid crystal film technology called NCAP. The glazing products can be switched in milliseconds between a highly translucent state (for privacy and glare control) to a transparent state (for high visibility) with the application of an AC voltage. The optical and environmental properties are demonstrated to meet the general requirements for architectural glazing use. The first qualified indoor product is described in detail.

Balancing Development and Conservation? An Assessment of Livelihood and Environmental Outcomes of Nontimber Forest Product Trade in Asia, Africa, and Latin America

Directory of Open Access Journals (Sweden)

Koen Kusters

2006-12-01

Full Text Available This article addresses the question, to what extent and under which conditions nontimber forest product (NTFP trade leads to both livelihood improvement and forest conservation. We based the analysis on a standardized expert-judgment assessment of the livelihood and environmental outcomes of 55 cases of NTFP trade from Asia, Africa, and Latin America. The results show that NTFP trade benefits several components of peoples' livelihoods, but may increase inequality between households. Involvement of women in the production-to-consumption system (PCS tends to have a positive impact on intrahousehold equity. In 80% of the cases, the commercial production of NTFPs does not enable people to make financial investments to increase quality and quantity of production, limiting the potential for development. In our set of cases, commercial extraction from the wild, without further management, tends to lead to resource depletion. NTFP production systems are generally considered to have lower environmental values than natural forest, but do contribute positively to the environmental values in the landscape. We found that higher livelihood outcomes are associated with lower environmental outcomes and conclude that NTFP trade is not likely to reconcile development and conservation of natural forest.

Monitoring fate and behaviour of Nanoceria under relevant environmental conditions

CSIR Research Space (South Africa)

Tancu, Y

2014-11-01

Full Text Available ). The results revealed significant tendency of nCeO¬2 to undergo aggregation, agglomeration and certain degree of deagglomeration processes under different environmental conditions. Moreover, the findings suggested that both electrostatic and steric interactions...

Population-level body condition correlates with productivity in an arctic wader, the dunlin Calidris alpina, during post-breeding migration.

Directory of Open Access Journals (Sweden)

Grzegorz Neubauer

Full Text Available Weather and predation constitute the two main factors affecting the breeding success of those Arctic waders whose productivity is highly variable over the years. We tested whether reproductive success is associated with the post-breeding condition of adults, in which in 'good' years (with warm weather, plentiful food and low predation pressure the condition of breeders and their productivity is high. To verify this hypothesis, we used a 10-year dataset comprising 20,792 dunlins Calidris alpina, trapped during migration at a stopover site on the southern Baltic Sea shore. Males were consistently in a slightly worse condition than females, likely due to male-biased parental investment in brood rearing. Annual productivity indices were positively correlated with the respective condition indices of breeders from the Eurasian Arctic, indicating that in 'good' years, despite great effort spent on reproduction, breeders leave the breeding grounds in better condition. The pattern did not hold for 1992: productivity was low, but the average condition of adults during migration was the highest noted over the decade. We suggest that the delayed effect of the Mount Pinatubo eruption in the Philippines in 1991, could be responsible for the unexpected high condition of Arctic breeders in 1992. High population-level average condition, coupled with the low productivity could stem from severe weather caused by the volcano eruption a year before and strong predation pressure, which in turn lead to a reduced investment in reproduction. The importance of large-scale episodic phenomena, like this volcano eruption, may blur the statistical associations of wildlife with local environmental drivers.

Population-level body condition correlates with productivity in an arctic wader, the dunlin Calidris alpina, during post-breeding migration.

Science.gov (United States)

Neubauer, Grzegorz; Pilacka, Lucyna; Zieliński, Piotr; Gromadzka, Jadwiga

2017-01-01

Weather and predation constitute the two main factors affecting the breeding success of those Arctic waders whose productivity is highly variable over the years. We tested whether reproductive success is associated with the post-breeding condition of adults, in which in 'good' years (with warm weather, plentiful food and low predation pressure) the condition of breeders and their productivity is high. To verify this hypothesis, we used a 10-year dataset comprising 20,792 dunlins Calidris alpina, trapped during migration at a stopover site on the southern Baltic Sea shore. Males were consistently in a slightly worse condition than females, likely due to male-biased parental investment in brood rearing. Annual productivity indices were positively correlated with the respective condition indices of breeders from the Eurasian Arctic, indicating that in 'good' years, despite great effort spent on reproduction, breeders leave the breeding grounds in better condition. The pattern did not hold for 1992: productivity was low, but the average condition of adults during migration was the highest noted over the decade. We suggest that the delayed effect of the Mount Pinatubo eruption in the Philippines in 1991, could be responsible for the unexpected high condition of Arctic breeders in 1992. High population-level average condition, coupled with the low productivity could stem from severe weather caused by the volcano eruption a year before and strong predation pressure, which in turn lead to a reduced investment in reproduction. The importance of large-scale episodic phenomena, like this volcano eruption, may blur the statistical associations of wildlife with local environmental drivers.

Optimization of fermentation conditions for cellulases production by Bacillus licheniformis MVS1 and Bacillus sp. MVS3 isolated from Indian hot spring

Directory of Open Access Journals (Sweden)

Somen Acharya

2012-08-01

Full Text Available The aim of this work was to study the effect of some nutritional and environmental factors on the production of cellulases, in particular endoglucanase (CMCase and exoglucanases (FPase from Bacillus licheniformis MVS1 and Bacillus sp. MVS3 isolated from an Indian hot spring. The characterization study indicated that the optimum pH and temperature value was 6.5 to 7.0 and 50-55°C, respectively. Maximum cellulases production by both the isolates was detected after 60 h incubation period using wheat and rice straw. The combination of inorganic and organic nitrogen source was suitable for cellulases production. Overall, FPase production was much higher than CMCase production by both of the strains. Between the two thermophiles, the cellulolytic activity was more in B.licheniformis MVS1 than Bacillus sp. MVS3 in varying environmental and nutritional conditions.

Contribution of environmental conditions in dental offices of Antioquia to the risk of mercury contamination

Directory of Open Access Journals (Sweden)

Jairo A. Ruiz C

2008-06-01

Full Text Available This article is a product from the project “Environmental Management of Dental Amalgam in the State of Antioquia” which was carried out by the following research groups belonging to the University of Antioquia: Science and Biomedical Technology, Precious Materials, and Pirometallurgical and Materials Researches, as well as the private company New Stetic S. A., between February 2005 and February 2007. Objective: to describe the environmental conditions in 30 big dental offices of the State of Antioquia, Colombia. Those dental offices having more than five dental chairs in the same work place were defined as “big” for the purpose of this project. Due to the fact that these dental offices represents 85% of the population of reference, the results described in this article can be consequently considered as is they were derived from a census. The description is made bearing in mind the people who are exposed to the risk of mercury contamination due to their occupation. Materials and method: an observation tool was designed in order to be applied in each dental office. It contained aspects as floor and wall characteristics, ventilation, room temperature, storing place for mercury, elements for handling amalgam scraps, and those activities which deviate from the regular dental service in the same site. Each dental office was visited by a research engineer and an advanced engineering student on a previously defined date. The researchers were trained in advance to collect the information. Results: it was found that some big dental offices have inadequate conditions in their premises for offering their services, and do not have a good handling of the environmental conditions. That’s why immediate actions are mandatory to minimize the risk of mercury contamination.

Products and Processes Innovation from the Perspective of Environmental Management

Directory of Open Access Journals (Sweden)

Vanessa Theis

2017-05-01

Full Text Available Considering the present scenario of globalization of the economy, the dynamics of the market determines the speed of change in business models, environmental aspects can contribute to the design of technological innovations. Given this perception, the general objective of this research was to investigate how industrial organizations in the metal-mechanic sector, located in the Vale do Rio dos Sinos region, reconcile the product innovation activities and processes, with the structuring principles of environmental management. This economic segment is characterized as one that has the highest rates of innovation and greater investment in research and development. Data were collected through a survey research with managers of 159 companies of the analysis unit. Evidence collected provided the realization that innovations tend to be adjustments made to the legal provisions that require the mitigation of environmental impacts in the production process, especially in reducing pollution and using less toxic assets, which does not generate sufficient stimulus to the development of new products.

Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

Directory of Open Access Journals (Sweden)

Louise Laumann Kjaer

2015-08-01

Full Text Available An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO database as a basis for corporate and product environmental footprint accounts, including the entire supply chain. We present three cases, where this approach was applied. Case study 1 describes the creation of total corporate carbon footprint accounts for three Danish regional healthcare organisations. In case study 2, the approach was used as basis for an Environmental Profit and Loss account for the healthcare company, Novo Nordisk A/S. Case study 3 used the approach for life cycle assessment of a tanker ship. We conclude that EIO-based analyses offer a holistic view of environmental performance, provide a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results, including how to measure and monitor the effect of the different actions. Thus, future research should include more detailed models to support decision-making.

Practical approach to environmental protection in the exploration and production industry

International Nuclear Information System (INIS)

Emmons, L.N.

1994-01-01

Environmental protection is a major issue throughout the world. Effective environmental protection techniques exist that are simple, creative, practical, and often cost effective. The cornerstone of cost effective environmental protection is an environmental management system. Various techniques are also available for reducing wastes, minimizing spills, remediating soils, reducing air emissions, and protecting groundwater and surface water in exploration and production operations

Radioactive environmental impact assessment for a production project of titanium dioxide by chlorination process

International Nuclear Information System (INIS)

Qiu Guohua

2010-01-01

Based on the analysis of shifting direction of radionuclide in production process and the environmental investigation and monitoring, the radioactive environmental impact from a production project of titanium dioxide by chlorination process has been analyzed and assessed. The result of radioactive environmental investigation shows that values of assessment factors are in the range of environmental radioactive background. The radioactive environmental sensitive spot has been delineated. The results of radioactive environmental prediction show that the additional doses to workers and residents are 0.59 mSv/a and 9.28 × 10-4 mSv/a respectively which are less than the annual dose limits of administration. The radioactive environmental impact of the production project of the titanium dioxide by chlorination process will meet the needs of national regulations and standards if radiation protection and environmental protection measures are implemented and radioactive environmental monitoring are strengthened. (author)

Environmental report 2010

Energy Technology Data Exchange (ETDEWEB)

2010-06-15

As the electricity and natural gas transmission system operator in Denmark, Energinet.dk is obliged by the Danish Electricity Supply Act to prepare an annual environmental report for the purpose of creating an overview of the environmental conditions in the electricity sector. The environmental report also contributes to assessing the objectives implemented in Danish environmental and energy strategies. Environmental Report 2010 describes the most significant environmental impact of electricity and CHP production in Denmark and of the operation of the electricity and natural gas transmission systems. Environmental Report 2010 deals with the following five main topics: 1) A status of the environmental impact of the Danish power system in 2009. The status includes the most important key figures for electricity and CHP production, electricity exchange with neighbouring countries, and emissions of the substances subject to the EU Emissions Trading Scheme, ie carbon dioxide (CO{sub 2}), sulphur dioxide (SO{sub 2}) and nitrogen oxides (NO{sub x}). 2) The Environmental Impact Statement for electricity, which states the environmental impact of consuming one kWh of electricity. The statement accounts for a total of eight emissions to the air, seven residual products and eight fuel types. 3) Historical analysis of the environmental conditions in the electricity sector in the 1990-2020 period and a forecast of the future environmental impact of the electricity sector until 2020. An account is given of developments in electricity consumption, power generation, fuel consumption and emissions of CO{sub 2}, SO{sub 2} and NO{sub x}. 4) The environmental impact of transporting electricity and natural gas in the electricity and natural gas transmission systems and of storing natural gas in Energinet.dk's gas storage facility in Lille Torup. 5) Energinet.dk's own environmental activities. Here, some of Energinet.dk's other environmental activities, which are not

Site-Dependent Environmental Impacts of Industrial Hydrogen Production by Alkaline Water Electrolysis

Directory of Open Access Journals (Sweden)

Jan Christian Koj

2017-06-01

Full Text Available Industrial hydrogen production via alkaline water electrolysis (AEL is a mature hydrogen production method. One argument in favor of AEL when supplied with renewable energy is its environmental superiority against conventional fossil-based hydrogen production. However, today electricity from the national grid is widely utilized for industrial applications of AEL. Also, the ban on asbestos membranes led to a change in performance patterns, making a detailed assessment necessary. This study presents a comparative Life Cycle Assessment (LCA using the GaBi software (version 6.115, thinkstep, Leinfelden-Echterdingen, Germany, revealing inventory data and environmental impacts for industrial hydrogen production by latest AELs (6 MW, Zirfon membranes in three different countries (Austria, Germany and Spain with corresponding grid mixes. The results confirm the dependence of most environmental effects from the operation phase and specifically the site-dependent electricity mix. Construction of system components and the replacement of cell stacks make a minor contribution. At present, considering the three countries, AEL can be operated in the most environmentally friendly fashion in Austria. Concerning the construction of AEL plants the materials nickel and polytetrafluoroethylene in particular, used for cell manufacturing, revealed significant contributions to the environmental burden.

The physiology of ex vitro pineapple (Ananas comosus L. Merr. var MD-2) as CAM or C3 is regulated by the environmental conditions.

Science.gov (United States)

Aragón, C; Carvalho, L; González, J; Escalona, M; Amancio, S

2012-04-01

Many plant species grown under in vitro controlled conditions can be used as models for the study of physiological processes. Adult pineapple can display CAM physiology while in vitro it functions as a C3 plant. Ex vitro Ananas comosus has plastic morphology and physiology, both easy to modify from C3 to CAM by changing the environmental conditions. The yield of survival for a rentable propagation protocol of pineapple is closely related with the C3/CAM shift and the associated physiological characteristics. In the present work, ex vitro pineapple plants were divided in two sets and subjected to C3 and CAM-inducing environmental conditions, determined by light intensity and relative humidity, respectively, 40 μmol m(-2) s(-1)/85% and 260 μmol m(-2) s(-1)/50%. The results demonstrated that the stress imposed by the environmental conditions switched pineapple plants from C3 to CAM behavior. Comparing to CAM induced, C3-induced pineapple plants showed substandard growth parameters and morphological leaf characteristics but a better rooting process and a higher ABA production, a phenotype closer to adult plants, which are expected to produce fruits in a normal production cycle. We conclude that the upholding of these characteristics is conditioned by low light intensity plus high relative humidity, especially during the first 8 weeks of ex vitro growth. It is expected that the better understanding of pineapple acclimatization will contribute to the design of a protocol to apply as a rentable tool in the pineapple agronomic industry. © Springer-Verlag 2011

A Conditional Fourier-Feynman Transform and Conditional Convolution Product with Change of Scales on a Function Space II

Directory of Open Access Journals (Sweden)

Dong Hyun Cho

2017-01-01

Full Text Available Using a simple formula for conditional expectations over continuous paths, we will evaluate conditional expectations which are types of analytic conditional Fourier-Feynman transforms and conditional convolution products of generalized cylinder functions and the functions in a Banach algebra which is the space of generalized Fourier transforms of the measures on the Borel class of L2[0,T]. We will then investigate their relationships. Particularly, we prove that the conditional transform of the conditional convolution product can be expressed by the product of the conditional transforms of each function. Finally we will establish change of scale formulas for the conditional transforms and the conditional convolution products. In these evaluation formulas and change of scale formulas, we use multivariate normal distributions so that the conditioning function does not contain present positions of the paths.

Environmental and Social Management System Implementation Handbook : Crop Production

OpenAIRE

International Finance Corporation

2014-01-01

This Handbook is intended to be a practical guide to help companies in the crop production industry develop and implement an environmental and social management system, which should help to improve overall operations. If a company has existing management systems for quality or health and safety, this Handbook will help to expand them to include environmental and social performance. Sectio...

Can green consumerism replace environmental regulation? A differentiated-products example

Energy Technology Data Exchange (ETDEWEB)

Eriksson, Clas [Department of Economics, Swedish University of Agricultural Sciences, P.O. Box 7013, S-750 07 Uppsala (Sweden)

2004-09-01

This paper assumes that consumers are willing to pay an extra premium for a good if it has a low impact on the environment. We examine if a little dose of such idealistic behavior has a large impact on the market equilibrium, and to what extent it can replace the environmental regulation. The analysis is carried out in a model with product differentiation, where consumers differ in their preferences for product quality. Consumers' willingness to pay the environmental premium may be uniformly or non-uniformly distributed. Green consumerism will only be modestly influential in both cases, despite the fact that product differentiation leads to relaxed competition and increased profits, and thereby creates leverage.

Can green consumerism replace environmental regulation? A differentiated-products example

International Nuclear Information System (INIS)

Eriksson, Clas

2004-01-01

This paper assumes that consumers are willing to pay an extra premium for a good if it has a low impact on the environment. We examine if a little dose of such idealistic behavior has a large impact on the market equilibrium, and to what extent it can replace the environmental regulation. The analysis is carried out in a model with product differentiation, where consumers differ in their preferences for product quality. Consumers' willingness to pay the environmental premium may be uniformly or non-uniformly distributed. Green consumerism will only be modestly influential in both cases, despite the fact that product differentiation leads to relaxed competition and increased profits, and thereby creates leverage

Life cycle energy efficiency and environmental impact assessment of bioethanol production from sweet potato based on different production modes

Science.gov (United States)

Zhang, Jun; Jia, Chunrong; Wu, Yi; Xi, Beidou; Wang, Lijun; Zhai, Youlong

2017-01-01

The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production. PMID:28672044

Advance Planning, Programming and Production Control as key Activities Now the Environmental Education

Directory of Open Access Journals (Sweden)

Geraldo Cardoso de Oliveira Neto

2015-06-01

Full Text Available This work addresses the evolution of Planning, Programming and Control of Production (PPCP as essential activities of the company towards the insertion of environmental education. The approach is based on an exploratory research and a critical bibliographic revision. Two main objectives were established: i a new way of production organization, by considering cleaner production from company utilities to production capacity, technology and outsourcing and ii infrastructure changes related to market attendance and environmental education dissemination. Needs that arise can be grouped as follows: utilities adequacy, cleaner technologies and ecochains implementation; instruction and dissemination of environmental education; and necessity of the adoption of new paradigms.

Green Shoots: Environmental Sustainability and Contemporary Film Production

Directory of Open Access Journals (Sweden)

Victory, Jonathan

2015-06-01

Full Text Available This paper explores the emerging phenomenon of ‘green filmmaking’ in film production, whereby the process of filmmaking is conducted with a view to minimising environmental impact. Establishing the motivations behind green filmmaking and surveying a range of international developments in this area, sustainability initiatives are identified and considered as a means of environmentally-sustainable economic development for the film sector. After identifying challenges of consumption habits to be overcome by the film industry worldwide, recent and current initiatives are highlighted from within the international film industry and one is specifically explored in more detail: the emerging role of a designated crew member or ‘eco-manager’ to oversee environmental initiatives on-set. The paper then concludes on a range of brief policy proposals for the film sector following on from analysis of existing film industry policy towards environmental sustainability.

Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

Science.gov (United States)

Chen, Wenhao; Holden, Nicholas M

2018-02-15

The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

Cradle-to-gate environmental assessment of enzyme products produced industrially in Denmark by Novozymes A/S

DEFF Research Database (Denmark)

Nielsen, Per H.; Oxenbøll, Karen; Wenzel, Henrik

2007-01-01

of environmental impact are usually fermentation processes due to electricity and ingredient consumption. Enzyme production has been the subject of significant optimisation during the past decades by implementation of e.g. gene modified production strains, and the provided environmental data are only...... and use of hazardous chemicals. The present paper provides a methodological framework for analysing environmental impacts of enzyme products and environmental data for five characteristic enzyme products. Methods. Life cycle assessment is used as an analytical tool and modelling of enzyme production...... for five representative enzyme products produced by Novozymes in Denmark have been determined, and a basis for further assessments of more of Novozymes' enzyme products has been established. Environmental impacts induced by producing the considered enzyme products vary by a factor 10 or more depending...

An Environmental Analysis of the Effect of Energy Saving, Production and Recovery Measures on Water Supply Systems under Scarcity Conditions

Directory of Open Access Journals (Sweden)

Valeria Puleo

2015-06-01

Full Text Available Water is one of the primary resources provided for maintaining quality of life and social status in urban areas. As potable water is considered to be a primary need, water service has usually been managed without examining the economic and environmental sustainability of supply processes. Currently, due to increases in energy costs and the growth of environment preservation policies, reducing water leakage, energy consumption and greenhouse gas (GHG production have become primary objectives in reducing the environmental footprint of water service. The present paper suggests the implementation of some performance indicators that show the interdependence of water loss, energy consumption and GHG emission. These indicators are used to compare a few possible mitigation scenarios involving water loss reduction and increasing the system’s energy efficiency. The proposed indicators were applied to a complex urban water supply system serving the city of Palermo (Italy.

Environmentally Sustainable Construction Products and Materials – Assessment of release

DEFF Research Database (Denmark)

Wahlström, Margareta; Laine-Yliijoki, Jutta; Järnström, helena

The construction sector consumes yearly about half of all natural resourcesextracted in Europe and their transformation into building products has huge energy demands. Therefore the focus of today’s environmental policy is on the building end-of-life scenarios and material efficiency. Here waste...... hardly any construction product is designed keeping recycling/reuse in mind, the “Design for theEnvironment” -concept is one of the key steps towards increased recycling and reuse and thereby towards minimal environmental impacts. This project has been carried out by VTT with cooperation with the Danish...

Environmental conditions and Puumala virus transmission in Belgium

DEFF Research Database (Denmark)

Linard, Catherine; Tersago, Katrien; Leirs, Herwig

2007-01-01

of this study is to better understand the causal link between environmental features and PUUV prevalence in bank vole population in Belgium, and hence with transmission risk to humans. Our hypothesis was that environmental conditions controlling the direct and indirect transmission paths differ....... Based on logistic regressions, we show that PUUV prevalence among bank voles is more linked to variables favouring the survival of the virus in the environment, and thus the indirect transmission: low winter temperatures are strongly linked to prevalence among bank voles, and high soil moisture...... is linked to the number of NE cases among humans. The transmission risk to humans therefore depends on the efficiency of the indirect transmission path. Human risk behaviours, such as the propensity for people to go in forest areas that best support the virus, also influence the number of human cases...

Internal cycle modeling and environmental assessment of multiple cycle consumer products

International Nuclear Information System (INIS)

Tsiliyannis, C.A.

2012-01-01

Highlights: ► Dynamic flow models are presented for remanufactured, reused or recycled products. ► Early loss and stochastic return are included for fast and slow cycling products. ► The reuse-to-input flow ratio (Internal Cycle Factor, ICF) is determined. ► The cycle rate, which is increasing with the ICF, monitors eco-performance. ► Early internal cycle losses diminish the ICF, the cycle rate and performance. - Abstract: Dynamic annual flow models incorporating consumer discard and usage loss and featuring deterministic and stochastic end-of-cycle (EOC) return by the consumer are developed for reused or remanufactured products (multiple cycle products, MCPs), including fast and slow cycling, short and long-lived products. It is shown that internal flows (reuse and overall consumption) increase proportionally to the dimensionless internal cycle factor (ICF) which is related to environmental impact reduction factors. The combined reuse/recycle (or cycle) rate is shown capable for shortcut, albeit effective, monitoring of environmental performance in terms of waste production, virgin material extraction and manufacturing impacts of all MCPs, a task, which physical variables (lifetime, cycling frequency, mean or total number of return trips) and conventional rates, via which environmental policy has been officially implemented (e.g. recycling rate) cannot accomplish. The cycle rate is shown to be an increasing (hyperbolic) function of ICF. The impact of the stochastic EOC return characteristics on total reuse and consumption flows, as well as on eco-performance, is assessed: symmetric EOC return has a small, positive effect on performance compared to deterministic, while early shifted EOC return is more beneficial. In order to be efficient, environmental policy should set higher minimum reuse targets for higher trippage MCPs. The results may serve for monitoring, flow accounting and comparative eco-assessment of MCPs. They may be useful in identifying

Environmental benefits of the integrated production of ethanol and biodiesel

International Nuclear Information System (INIS)

Souza, Simone Pereira; Seabra, Joaquim E.A.

2013-01-01

Highlights: ► Integrated bioenergy systems can favor the sustainability of biofuels. ► We analyzed the integrated production of ethanol and biodiesel in Brazil. ► GHG emissions and fossil energy use in the ethanol life cycle would be reduced. ► Socio-economic and other environmental aspects must be analyzed in future works. -- Abstract: The biorefinery of the future will be an integrated complex that makes a variety of products (e.g., biofuels, chemicals, power and protein) from a variety of feedstocks. The objective of this work was to evaluate the environmental benefits, compared to the traditional sugarcane ethanol system, of the integrated production of ethanol and biodiesel through a sugarcane–soybean biorefinery concept in Brazil. The environmental aspects considered here were the fossil energy use and the greenhouse gases (GHGs) emissions associated with ethanol production. In the Integrated System, soybean would be cultivated in part of the sugarcane reforming areas, which represents ∼17% of the total sugarcane area. Sugarcane and soybean oil would be processed in a combined ethanol–biodiesel plant, which would use only bagasse as fuel. All the demand for utilities of the biodiesel plant would be provided by the distillery. The output products of the combined plant would comprise sugarcane ethanol, soybean biodiesel (which would be used as diesel (B5) substitute in the sugarcane cultivation), bioelectricity and glycerin. The results indicate that the Integrated System can reduce the fossil energy consumption from 75 to 37 kJ/MJ of ethanol, when compared to the traditional system. For GHG emissions, the value would drop from 22.5 to 19.7 g CO 2 eq/MJ of ethanol. This analysis shows that the Integrated System is an important option to contribute to ethanol’s life cycle independence from fossil resources. This is an attractive environmental aspect, but socio-economic (as well as other environmental) aspects should also be analyzed in order to

Impact of Alternative Environmental Flow Prescriptions on Hydropower Production and Fish Habitat Suitability

Science.gov (United States)

Castellarin, A.; Ceola, S.; Pugliese, A.; Galeati, G. A.

2015-12-01

Anthropogenic activities along streams and rivers are increasingly recognized to be a major concern for fluvial ecosystems. The management of water resources, by means of e.g. flow diversions and dams, for industrial, agricultural, water-supply, hydropower production and flood protection purposes induces significant changes to the natural streamflow regime of a river. Indeed, the river flow regime is known to be a major abiotic factor influencing fluvial ecosystems. An established approach aimed at preserving the behaviour and distribution of fluvial species relies on the definition of minimum streamflow requirements (i.e., environmental flows) downstream of dams and diversion structures. Such environmental flows are normally identified through methodologies that have an empirical nature and may not be representative of local ecological and hydraulic conditions. While the effect of imposing a minimum discharge release is easily predictable in terms of e.g. loss of hydropower production, the advantages in terms of species preferences are often poorly understood and seldom assessed. To analyze the interactions between flow releases and the behaviour and distribution of fluvial species (i.e., from periphyton, to benthic invertebrate and fish), one may use a habitat suitability curve, which is a fundamental tool capable of describing species preferences influenced by any generic environmental variable. The outcomes of a real case study applied to several Italian rivers, located in the Marche administrative district in Central Italy (∽10000km2), in which we quantitatively assess the effects of alternative environmental flow scenarios on the existing hydropower network and on two fish species that are quite abundant in the study area (i.e., Leuciscus cephalus cabeda and Barbus barbus plebejus), will be presented and discussed. The proposed analysis, which can be easily adapted to different riparian habitats and hydrological contexts, is a useful tool to guide the

Jatropha curcasand Ricinus communisdisplay contrasting photosynthetic mechanisms in response to environmental conditions

Directory of Open Access Journals (Sweden)

Milton Costa Lima Neto

2015-06-01

Full Text Available Higher plants display different adaptive strategies in photosynthesis to cope with abiotic stress. In this study, photosynthetic mechanisms and water relationships displayed byJatropha curcasL. (physic nuts andRicinus communisL. (castor bean, in response to variations in environmental conditions, were assessed.R. communis showed higher CO2 assimilation, stomatal and mesophyll conductance thanJ. curcas as light intensity and intercellular CO2 pressure increased. On the other hand,R. communis was less effective in stomatal control in response to adverse environmental factors such as high temperature, water deficit and vapor pressure deficit, indicating lower water use efficiency. Conversely,J. curcas exhibited higher photosynthetic efficiency (gas exchange and photochemistry and water use efficiency under these adverse environmental conditions.R. communisdisplayed higher potential photosynthesis, but exhibited a lowerin vivo Rubisco carboxylation rate (Vcmax and maximum electron transport rate (Jmax. During the course of a typical day, in a semiarid environment, with high irradiation, high temperature and high vapor pressure deficit, but exposed to well-watered conditions, the two studied species presented similar photosynthesis. Losing potential photosynthesis, but maintaining favorable water status and increasing non-photochemical quenching to avoid photoinhibition, are important acclimation mechanisms developed byJ. curcas to cope with dry and hot conditions. We suggest thatJ. curcas is more tolerant to hot and dry environments thanR. communis but the latter species displays higher photosynthetic efficiency under well-watered and non-stressful conditions.

Is cumulative fossil energy demand a useful indicator for the environmental performance of products?

NARCIS (Netherlands)

Huijbregts, Mark A J; Rombouts, Linda J A; Hellweg, Stefanie; Frischknecht, Rolf; Hendriks, A Jan; Meent, Dik van de; Ragas, Ad M J; Reijnders, Lucas; Struijs, Jaap

2006-01-01

The appropriateness of the fossil Cumulative Energy Demand (CED) as an indicator for the environmental performance of products and processes is explored with a regression analysis between the environmental life-cycle impacts and fossil CEDs of 1218 products, divided into the product categories

DETERMINATION OF SOCIAL ECONOMIC AND ENVIRONMENTAL SUCCESS OF PRODUCTS:

Directory of Open Access Journals (Sweden)

ESEN GÜRBÜZ

2013-06-01

Full Text Available An Empirical Investigation on the Turkish Food Industry Altough there are studies which evaulate and explain the importance of environmental, social and economic success of a product, it is important to evaluate the considerable success of these three variables together. This paper aims to evaluate economic, social and environmental success of a product all together (but not seperatly by conducting a research.  In this paper for some sample firms operating in the Turkish Food Industry, the variables, which effect the products’ economic, social and enviromental successes, are defined theoretically and the research results are explained investigating if there is a relationship between enviromental, social, economic success criteria and firm size, export, import use of intermediary.

Fusarium graminearum in Stored Wheat: Use of CO2 Production to Quantify Dry Matter Losses and Relate This to Relative Risks of Zearalenone Contamination under Interacting Environmental Conditions

Science.gov (United States)

Kiaitsi, Elsa; Magan, Naresh

2018-01-01

Zearalenone (ZEN) contamination from Fusarium graminearum colonization is particularly important in food and feed wheat, especially during post-harvest storage with legislative limits for both food and feed grain. Indicators of the relative risk from exceeding these limits would be useful. We examined the effect of different water activities (aw; 0.95–0.90) and temperature (10–25 °C) in naturally contaminated and irradiated wheat grain, both inoculated with F. graminearum and stored for 15 days on (a) respiration rate; (b) dry matter losses (DML); (c) ZEN production and (d) relationship between DML and ZEN contamination relative to the EU legislative limits. Gas Chromatography was used to measure the temporal respiration rates and the total accumulated CO2 production. There was an increase in temporal CO2 production rates in wetter and warmer conditions in all treatments, with the highest respiration in the 25 °C × 0.95 aw treatments + F. graminearum inoculation. This was reflected in the total accumulated CO2 in the treatments. The maximum DMLs were in the 0.95 aw/20–25 °C treatments and at 10 °C/0.95 aw. The DMLs were modelled to produce contour maps of the environmental conditions resulting in maximum/minimum losses. Contamination with ZEN/ZEN-related compounds were quantified. Maximum production was at 25 °C/0.95–0.93 aw and 20 °C/0.95 aw. ZEN contamination levels plotted against DMLs for all the treatments showed that at ca. 1.0% DML, the risk was high. This type of data is important in building a database for the development of a post-harvest decision support system for relative risks of different mycotoxins. PMID:29462982

Fusarium graminearum in Stored Wheat: Use of CO2 Production to Quantify Dry Matter Losses and Relate This to Relative Risks of Zearalenone Contamination under Interacting Environmental Conditions

Directory of Open Access Journals (Sweden)

Esther Garcia-Cela

2018-02-01

Full Text Available Zearalenone (ZEN contamination from Fusarium graminearum colonization is particularly important in food and feed wheat, especially during post-harvest storage with legislative limits for both food and feed grain. Indicators of the relative risk from exceeding these limits would be useful. We examined the effect of different water activities (aw; 0.95–0.90 and temperature (10–25 °C in naturally contaminated and irradiated wheat grain, both inoculated with F. graminearum and stored for 15 days on (a respiration rate; (b dry matter losses (DML; (c ZEN production and (d relationship between DML and ZEN contamination relative to the EU legislative limits. Gas Chromatography was used to measure the temporal respiration rates and the total accumulated CO2 production. There was an increase in temporal CO2 production rates in wetter and warmer conditions in all treatments, with the highest respiration in the 25 °C × 0.95 aw treatments + F. graminearum inoculation. This was reflected in the total accumulated CO2 in the treatments. The maximum DMLs were in the 0.95 aw/20–25 °C treatments and at 10 °C/0.95 aw. The DMLs were modelled to produce contour maps of the environmental conditions resulting in maximum/minimum losses. Contamination with ZEN/ZEN-related compounds were quantified. Maximum production was at 25 °C/0.95–0.93 aw and 20 °C/0.95 aw. ZEN contamination levels plotted against DMLs for all the treatments showed that at ca. <1.0% DML, there was a low risk of ZEN contamination exceeding EU legislative limits, while at >1.0% DML, the risk was high. This type of data is important in building a database for the development of a post-harvest decision support system for relative risks of different mycotoxins.

Expanding OPEC production capacity: some legal and environmental aspects

International Nuclear Information System (INIS)

Al-Sahlawi, M.A.

1992-01-01

There is general consensus that the global demand for oil will increase in the medium-to-long term. It is predicted that much of this additional demand will be for OPEC oil. Therefore, it will become necessary to expand OPEC production capacity to meet this perceived increase. In recent years, many OPEC countries have launched far-reaching and, in some cases, radical plans to expand their production capacity. However, given the various investment and political constraints faced by the 13 OPEC Members, each country differs markedly in its ability to boost production capacity sufficiently to meet self-imposed targets. In this paper, we examine the importance to the oil market of recent oil supply trends and possible future attempts to build OPEC production capacity, focussing in particular on the legal and environmental issues involved. A review is provided of the legal mechanisms currently evolving in OPEC Countries to encourage investment in their oil industries. In addition, we outline the impact of the environmental movement of OPEC's expansion programmes. (author)

Environmental conditions for SMME development in a South African province

Directory of Open Access Journals (Sweden)

Darma Mahadea

2011-08-01

Full Text Available The development of entrepreneurship is the focus of considerable policy interest in South Africa and many other countries.  This is particularly in recognition of its contribution to economic growth, poverty alleviation and employment creation. In South Africa, various new strategies and institutions have recently been created with a view to empowering formerly disadvantaged members to enter the mainstream economy as entrepreneurs rather than job seekers. While the government directs considerable efforts to advancing Small, Medium and Micro Enterprises (SMMEs, certain environmental factors can favour or hinder the optimal development of these firms. According to the Global Entrepreneurship Monitor (GEM reports, the level of entrepreneurial activity in South Africa is rather low in relation to that in other countries at a similar level of development.  This paper uses factor analysis to examine the internal and external environmental conditions influencing the development of small ventures on the basis of a survey conducted in Pietermaritzburg, the capital of the KZN province.  The results indicate that three clusters constrain SMME development in Pietermaritzburg:  management, finance and external environmental conditions. In the external set, rising crime levels, laws and regulations, and taxation are found to be significant constraints to the development of business firms.

Evaluation of indicators to assess the environmental impact of dairy production systems

NARCIS (Netherlands)

Thomassen, M.A.; Boer, de I.J.M.

2005-01-01

Current awareness of environmental pollution of animal production in Western Europe has triggered research on development of environmental indicators at farm level. Only when the environmental impact of commercial farms can be quantified effectively, important differences in impact can be

The Development of Environmental Productivity: the Case of Danish Energy Plants

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

2015-01-01

the environmental productivity of individual generator units based on a paneldata set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total environmental energy conversion productivity into conversion efficiency, best conversion practice ratio......, and conversion scale efficiency and use a global Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over...... the fourteen years. Furthermore, we find that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high...

Influence of sulphate-reducing bacteria on environmental parameters and marine corrosion behavior of Q235 steel in aerobic conditions

International Nuclear Information System (INIS)

Wan Yi; Zhang Dun; Liu Huaiqun; Li Yongjuan; Hou Baorong

2010-01-01

The growth cycle of sulphate-reducing bacteria (SRB), Desulfovibrio caledoniensis, and the effect of SRB on the environmental parameters and corrosion behavior of Q235 steel during a growth cycle in aerobic (air- and O 2 -saturated culture solutions) and anaerobic (N 2 - saturated culture solutions) conditions were investigated. Oxygen dissolved in the culture solutions induced slow growth and fast decay of SRB. The growth process of SRB under anaerobic and aerobic conditions influenced sulphide anion concentration (C s 2- ), pH, and conductivity (κ). The values of C s 2- and κ under aerobic conditions were lower than those under anaerobic conditions, and the pH values increased from O 2 - to air- to N 2 -saturated culture solutions. Aerobic conditions induced the open circuit potential (E OC ) to shift in the positive direction after the stationary phase of SRB growth. The charge transfer resistance (R ct ) increased quickly during the exponential growth phase, almost maintained stability during the stationary phase, and decreased after the stationary phase in all three conditions, and the impedance magnitude decreased from O 2 - to air- to N 2 -saturated culture solutions. The biofilms induced by SRB were observed by scanning electron microscopy (SEM) under aerobic and anaerobic conditions, and energy dispersive spectroscopy (EDS) was performed in abiotic and SRB-containing systems to distinguish the corrosion products. The reasons for the effects of SRB on the environmental parameters and corrosion behavior of carbon steel are discussed.

Tracing distant environmental impacts of agricultural products from a consumer perspective

NARCIS (Netherlands)

Kastner, Thomas; Kastner, Michael; Nonhebel, Sanderine

2011-01-01

Globally, trade flows of agricultural products are increasing. While value is typically added along the whole production chain, certain environmental impacts, such as land and water use, biomass appropriation, and soil degradation, are intrinsically linked to where the primary products originate

Impact of the environmental conditions and substrate pre-treatment on whey protein hydrolysis: A review.

Science.gov (United States)

Cheison, Seronei Chelulei; Kulozik, Ulrich

2017-01-22

Proteins in solution are subject to myriad forces stemming from interactions with each other as well as with the solvent media. The role of the environmental conditions, namely pH, temperature, ionic strength remains under-estimated yet it impacts protein conformations and consequently its interaction with, and susceptibility to, the enzyme. Enzymes, being proteins are also amenable to the environmental conditions because they are either activated or denatured depending on the choice of the conditions. Furthermore, enzyme specificity is restricted to a narrow regime of optimal conditions while opportunities outside the optimum conditions remain untapped. In addition, the composition of protein substrate (whether mixed or single purified) have been underestimated in previous studies. In addition, protein pre-treatment methods like heat denaturation prior to hydrolysis is a complex phenomenon whose progression is influenced by the environmental conditions including the presence or absence of sugars like lactose, ionic strength, purity of the protein, and the molecular structure of the mixed proteins particularly presence of free thiol groups. In this review, we revisit protein hydrolysis with a focus on the impact of the hydrolysis environment and show that preference of peptide bonds and/or one protein over another during hydrolysis is driven by the environmental conditions. Likewise, heat-denaturing is a process which is dependent on not only the environment but the presence or absence of other proteins.

Increasing carbon and material productivity through environmental tax reform

International Nuclear Information System (INIS)

Ekins, Paul; Pollitt, Hector; Summerton, Philip; Chewpreecha, Unnada

2012-01-01

Environmental tax reform (ETR), a shift in taxation towards environmental taxes, has been implemented on a small scale in a number of European countries. This paper first gives a short review of the literature about ETR. An Appendix briefly describes the model used for a modelling exercise to explore, through scenarios with low and high international energy prices, the implications of a large-scale ETR in the European Union, sufficient to reach the EU's emission reduction targets for 2020. The paper then reports the results of the exercise. The ETR results in increased carbon and materials, but reduced labour, productivity, with the emission reductions distributed across all sectors as a reduction in the demand for all fossil fuels. There are also small GDP increases for most, but not all, EU countries for all the scenarios, and for the EU as a whole. Both the environmental and macroeconomic outcomes are better with low than with high energy prices, because the former both increases the scale of the ETR required to reach the targets, and reduces the outflow of foreign exchange to pay for energy imports. ETR emerges from the exercise as an attractive and cost-effective policy for environmental improvement. - Highlights: ► European experience with environmental tax reform (ETR) is reviewed. ► Scenarios which meet EU carbon emission targets are modelled. ► The ETR results in increased carbon and materials, but reduced labour, productivity. ► There are small GDP increases for most, but not all, EU countries. ► ETR emerges as an attractive and cost-effective environmental policy.

Coherence in product-oriented policies and environmental management systems in the car industry

DEFF Research Database (Denmark)

Smink, Carla Kornelia; Nielsen, Eskild Holm

more traditional process-oriented policies and are a challenge for companies. The article presents some of the authors  investigations on how the car industry has dealt with both process-oriented and product-oriented policies. [1] EPR refers to extending producer responsibility for products beyond......Over the last decade, product-oriented policies as Extended Producer Responsibility (EPR) and Integrated Product Policy (IPP) are more and more recognised as a target for both corporate environmental strategy and government environmental policy. These product-oriented policies are distinct from...

Review of U.S. Army Aviation Accident Reports: Prevalence of Environmental Stressors and Medical Conditions

Science.gov (United States)

2017-10-18

terminology related to an aforementioned stressor or medical condition. Table 1 presents the identified operational stressor with the keywords extracted...USAARL Report No. 2018-02 Review of U.S. Army Aviation Accident Reports: Prevalence of Environmental Stressors and Medical Conditions By Kathryn...Environmental Stressors and Medical Conditions N/A N/A N/A N/A N/A N/A Feltman, Kathryn A. Kelley, Amanda M. Curry, Ian P. Boudreaux, David A. Milam

The Conditions for Functional Mechanisms of Compensation and Reward for Environmental Services

Directory of Open Access Journals (Sweden)

Brent M. Swallow

2010-12-01

Full Text Available Mechanisms of compensation and reward for environmental services (CRES are becoming increasingly contemplated as means for managing human-environment interactions. Most of the functional mechanisms in the tropics have been developed within the last 15 years; many developing countries still have had little experience with functional mechanisms. We consider the conditions that foster the origin and implementation of functional mechanisms. Deductive and inductive approaches are combined. Eight hypotheses are derived from theories of institution and policy change. Five case studies, from Latin America, Africa, and Asia, are then reviewed according to a common framework. The results suggest the following to be important conditions for functional CRES mechanisms: (1 localized scarcity for particular environmental services, (2 influence from international environmental agreements and international organizations, (3 government policies and public attitudes favoring a mixture of regulatory and market-based instruments, and (4 security of individual and group property rights.

Optimization of fermentation conditions for the production of curcumin by engineered Escherichia coli.

Science.gov (United States)

Couto, Márcia R; Rodrigues, Joana L; Rodrigues, Lígia R

2017-08-01

Curcumin is a plant secondary metabolite with outstanding therapeutic effects. Therefore, there is a great interest in developing new strategies to produce this high-value compound in a cheaper and environmentally friendly way. Curcumin heterologous production in Escherichia coli using artificial biosynthetic pathways was previously demonstrated using synthetic biology approaches. However, the culturing conditions to produce this compound were not optimized and so far only a two-step fermentation process involving the exchange of culture medium allowed high concentrations of curcumin to be obtained, which limits its production at an industrial scale. In this study, the culturing conditions to produce curcumin were evaluated and optimized. In addition, it was concluded that E. coli BL21 allows higher concentrations of curcumin to be produced than E. coli K-12 strains. Different isopropyl β-d-thiogalactopyranoside concentrations, time of protein expression induction and substrate type and concentration were also evaluated. The highest curcumin production obtained was 959.3 µM (95.93% of per cent yield), which was 3.1-fold higher than the highest concentration previously reported. This concentration was obtained using a two-stage fermentation with lysogeny broth (LB) and M9. Moreover, terrific broth was also demonstrated to be a very interesting alternative medium to produce curcumin because it also led to high concentrations (817.7 µM). The use of this single fermentation medium represents an advantage at industrial scale and, although the final production is lower than that obtained with the LB-M9 combination, it leads to a significantly higher production of curcumin in the first 24 h of fermentation. This study allowed obtaining the highest concentrations of curcumin reported so far in a heterologous organism and is of interest for all of those working with the heterologous production of curcuminoids, other complex polyphenolic compounds or plant secondary

Research of Environmental and Economic Interactions of Coke And By-Product Process

Science.gov (United States)

Mikhailov, Vladimir; Kiseleva, Tamara; Bugrova, Svetlana; Muromtseva, Alina; Mikhailova, Yana

2017-11-01

The issues of showing relations between environmental and economic indicators (further - environmental and economic interactions) of coke and by-product process are considered in the article. The purpose of the study is to reveal the regularities of the functioning of the local environmental and economic system on the basis of revealed spectrum of environmental and economic interactions. A simplified scheme of the environmental and economic system "coke and by-product process - the environment" was developed. The forms of the investigated environmental-economic interactions were visualized and the selective interpretation of the tightness of the established connection was made. The main result of the work is modeling system of environmental and economic interactions that allows increasing the efficiency of local ecological and economic system management and optimizing the "interests" of an industrial enterprise - the source of negative impact on the environment. The results of the survey can be recommended to government authorities and industrial enterprises with a wide range of negative impact forms to support the adoption of effective management decisions aimed at sustainable environmental and economic development of the region or individual municipalities.

Evaluation of Underwater Image Enhancement Algorithms under Different Environmental Conditions

Directory of Open Access Journals (Sweden)

Marino Mangeruga

2018-01-01

Full Text Available Underwater images usually suffer from poor visibility, lack of contrast and colour casting, mainly due to light absorption and scattering. In literature, there are many algorithms aimed to enhance the quality of underwater images through different approaches. Our purpose was to identify an algorithm that performs well in different environmental conditions. We have selected some algorithms from the state of the art and we have employed them to enhance a dataset of images produced in various underwater sites, representing different environmental and illumination conditions. These enhanced images have been evaluated through some quantitative metrics. By analysing the results of these metrics, we tried to understand which of the selected algorithms performed better than the others. Another purpose of our research was to establish if a quantitative metric was enough to judge the behaviour of an underwater image enhancement algorithm. We aim to demonstrate that, even if the metrics can provide an indicative estimation of image quality, they could lead to inconsistent or erroneous evaluations.

Physical foundation of the labor theory of value: production and environmental destruction

International Nuclear Information System (INIS)

Obinata, T.

2005-01-01

A concept negentropy is introduced to supplement Marx's labor theory of value. The negentropy, that is a less entropy state than the thermal equilibrium state of matter, is a common property of the usefulness of material needs. The production of commodity increases the negentropy of product, but the action raises more environmental entropy than the negentropy of the product. This is environmental damage. In addition the negentropy plays a role of the substance of value and answers the issue about productive and unproductive labor. It is clarified that the origin of surplus value is the negentropy of information

Economic factor environmental protection. Productivity of the German environmental and climate protection industry in international competition; Wirtschaftsfaktor Umweltschutz. Leistungsfaehigkeit der deutschen Umwelt- und Klimaschutzwirtschaft im internationalen Vergleich

Energy Technology Data Exchange (ETDEWEB)

Legler, Harald; Krawczyk, Olaf [Niedersaechsisches Institut fuer Wirtschaftsforschung (NIW), Hannover (Germany); Walz, Rainer; Eichhammer, Wolfgang; Frietsch, Rainer [Fraunhofer Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

2006-05-15

The analysis on the economic factor environment and the German environmental industry on international competition is faced to methodological limits, since the environmental industry does not present itself as an homogeneous sector. The study is organized in the following chapters: introduction - the importance of environmental industry; classification of environmental and climate protection industry; productivity volume and production structure; international competition for potential environmental protection products; environmental protection industry and innovative performance. Integrated environmental solutions are of increasing significance, avoiding emissions and products and production process from beginning on. All known forecast indicate an expansive market development. In addition the rising prices for crude oil may push the search for innovative solutions to substitute fossil energy sources. The environmental industry should look for globally transferable solutions in order to promote global sustainable growth.

Environmental problems related to winter traffic safety conditions

OpenAIRE

Hääl, Maire-Liis; Sürje, Peep

2006-01-01

The changeable Nordic climate has added problems to road maintenance and the environment to ensure traffic safety under winter conditions. The widespread use of salt (NaCl) for snow and ice removal from roads has resulted in environmental impacts in many areas. Some of the problems associated with the use of NaCl are the corrosion of bridges, road surfaces and vehicles and damage to roadside vegetation and aquatic system that are affected by water from de-iced roads. Accumulation of hard meta...

NPP Krsko containment environmental conditions during postulated accident

International Nuclear Information System (INIS)

Kozaric, M.; Cavlina, N.; Spalj, S.

1989-01-01

This paper presents NPP Krsko containment pressure and temperature increase during Loss of Coolant Accident (LOCA) and Main Steam Line Break (MSLB). Containment environmental condition calculation was performed by CONTEMPT4/MOD4 computer code. Design accident calculations were performed by RELAP4/MOD6 and RELAP5/MOD1 computer codes. Calculational abilities and application methodology of these codes are presented. The CONTEMPT code is described in more detail. The containment pressure and temperature time distribution are presented as well. (author)

Environmental and Human Health Impacts of Usage of Oil Industry Products and Wastes as Alternative Fuel

Directory of Open Access Journals (Sweden)

Dilek BOLAT

2016-03-01

Full Text Available The need for oil industry products has been increasing in parallel to the rapid population growth and industrialization. Physical and chemical properties of these products change after usage based on the media and operating conditions. Then, these products lose the eligibility and turn into the form of waste. The most commonly used method for the disposal of waste oils is combustion due to its high calorific value. In this study, the possible effects on the environment and human health of combustion of oil industry products and wastes are evaluated. Poor combustion conditions lead emissions from the process depending on the ingredients of wastes in addition to incomplete combustion products such as particulate matter, carbon monoxide, volatile organic chemicals polyaromatic hydrocarbons, metals etc. that may occur according to the type of waste. These emissions are released into the environment and partition between soil, water and air media related to their physicochemical characteristics. In addition to environmental problems, these emissions are a risk factor for human health in terms of carcinogenicity and mutagenicity. Regulations and control measures should be put into practice in order to get rid of the effects of non-standard diesel like product named number 10 lube on human health and environment. In this context, emission measurements should be done simultaneously to determine the effects of combustion of these wastes and products of oil industry.

LIFE CYCLE DESIGN GUIDANCE MANUAL - ENVIRONMENTAL REQUIREMENTS AND THE PRODUCT SYSTEM

Science.gov (United States)

The U.S Environmental Protection Agency's (EPA) Risk Reduction Engineering Laboratory and the University of Michigan are cooperating in a project to reduce environmental impacts and health risks through product system design. The resulting framework for life cycle design is pr...

Aspects and environmental impacts associated with the production of concrete

Directory of Open Access Journals (Sweden)

Aura Navas de García

2015-12-01

Full Text Available Concrete plants are important to the economy of a country. However, this industry causes major environmental impacts in each of the steps involved in the manufacturing process of concrete production which are analyzed in this research. In addition, the perception of experts and workers in the area, about the environmental impacts associated with the activity of a producer of concrete was evaluated. The methodology used for the analysis of steps in the production process was as kind documentary. For to evaluate perception of environmental impacts the methodology used was descriptive non experimental, using interviews with workers related to the manufacturing process of the concrete. Among the major identified environmental impacts are dust emissions and improper handling of effluents, hazardous and non-hazardous materials. Among the proposals put forward to address these impacts include: installation of dust collectors, settling tanks, management plans for hazardous and non-hazardous materials, among others. An analysis of the results incorporating the principles of corporate social responsibility for improving or minimizing adverse impacts are detected proposed

Household Production and Environmental Kuznets Curves. Examining the Desirability and Feasibility of Substitution

Energy Technology Data Exchange (ETDEWEB)

Pfaff, Alexander S.P.; Chaudhuri, S. [Department of International and Public Affairs, New York, NY 10027 (United States); Nye, Howard L.M. [Department of Economics, Columbia University SIPA, New York, NY 10027 (United States)

2004-02-01

This paper provides a theoretical explanation for the widely debated empirical finding of 'Environmental Kuznets Curves', i.e., U-shaped relationships between per-capita income and indicators of environmental quality. We present a household-production model in which the degradation of environmental quality is a by-product of household activities. Households can not directly purchase environmental quality, but can reduce degradation by substituting more expensive cleaner inputs to production for less costly dirty inputs. If environmental quality is a normal good, one expects substitution towards the less polluting inputs, so that increases in income will increase the quality of the environment. It is shown that this only holds for middle income households. Poorer households spend all income on dirty inputs. When they buy more, as income rises, the pollution also rises. they do not want to substitute, as this would reduce consumption of non-environmental services for environmental amenities that are already abundant. Thus, as income rises from low to middle levels, a U shape can result. Yet an N shape might eventually result, as richer households spend all income on clean inputs. Further substitution possibilities are exhausted. Thus as income rises again pollution rises and environmental quality falls.

Using data storage tags to link otolith macrostructure in Baltic cod Gadus morhua with environmental conditions

DEFF Research Database (Denmark)

Hüssy, Karin; Nielsen, Birgitte; Mosegaard, Henrik

2009-01-01

of a strontium chloride solution. Based on environmental conditions experienced, fish were classified into different behavioural types: non-reproducing 'non-spawner', and 'spawner' undertaking spawning migrations. Otolith opacity, an indicator of otolith and fish somatic growth and condition, was examined...... in relation to these environmental drivers. Temperature was the only environmental variable with a significant effect, overlaying a strong size-related effect. The temperature effect was not uniform across behavioural types and spawning periods. Opacity showed a negative correlation with temperature......We examined otolith opacity of Baltic cod in relation to environmental conditions in order to evaluate the formation mechanisms of seasonal patterns used in age determination. Adult fish were tagged with data storage tags (DSTs) and a permanent mark was induced in the otoliths by injection...

A comparative analysis of environmental impacts of non-fossil energy production methods

Directory of Open Access Journals (Sweden)

Kiss Adam

2014-01-01

Full Text Available The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

A comparative analysis of environmental impacts of non-fossil energy production methods

Science.gov (United States)

Kiss, Adam

2014-12-01

The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

Partitioning the Relative Importance of Phylogeny and Environmental Conditions on Phytoplankton Fatty Acids

Science.gov (United States)

Galloway, Aaron W. E.; Winder, Monika

2015-01-01

Essential fatty acids (EFA), which are primarily generated by phytoplankton, limit growth and reproduction in diverse heterotrophs. The biochemical composition of phytoplankton is well-known to be governed both by phylogeny and environmental conditions. Nutrients, light, salinity, and temperature all affect both phytoplankton growth and fatty acid composition. However, the relative importance of taxonomy and environment on algal fatty acid content has yet to be comparatively quantified, thus inhibiting predictions of changes to phytoplankton food quality in response to global environmental change. We compiled 1145 published marine and freshwater phytoplankton fatty acid profiles, consisting of 208 species from six major taxonomic groups, cultured in a wide range of environmental conditions, and used a multivariate distance-based linear model to quantify the total variation explained by each variable. Our results show that taxonomic group accounts for 3-4 times more variation in phytoplankton fatty acids than the most important growth condition variables. The results underscore that environmental conditions clearly affect phytoplankton fatty acid profiles, but also show that conditions account for relatively low variation compared to phylogeny. This suggests that the underlying mechanism determining basal food quality in aquatic habitats is primarily phytoplankton community composition, and allows for prediction of environmental-scale EFA dynamics based on phytoplankton community data. We used the compiled dataset to calculate seasonal dynamics of long-chain EFA (LCEFA; ≥C20 ɷ-3 and ɷ-6 polyunsaturated fatty acid) concentrations and ɷ-3:ɷ-6 EFA ratios in Lake Washington using a multi-decadal phytoplankton community time series. These analyses quantify temporal dynamics of algal-derived LCEFA and food quality in a freshwater ecosystem that has undergone large community changes as a result of shifting resource management practices, highlighting diatoms

Environmental technologies of woody crop production systems

Science.gov (United States)

Ronald S. Zalesny Jr.; John A. Stanturf; Emile S. Gardiner; Gary S. Ba??uelos; Richard A. Hallett; Amir Hass; Craig M. Stange; James H. Perdue; Timothy M. Young; David R. Coyle; William L. Headlee

2016-01-01

Soil erosion, loss of productivity potential, biodiversity loss, water shortage, and soil and water pollution are ongoing processes that decrease or degrade provisioning (e.g., biomass, freshwater) and regulating (e.g., carbon sequestration, soil quality) ecosystem services. Therefore, developing environmental technologies that maximize these services is essential for...

Pot plant production, environmental conditions and energy consumption in insulated greenhouses

Energy Technology Data Exchange (ETDEWEB)

Bjerre, H.; Amsen, M.G. (Statens Planteavlsforsoeg, Havebrugscentret, Institut for Vaeksthuskulturer, Aarslev, Denmark)

1984-01-01

An energy experiment with 4 different types of greenhouses was carried out in the winter 1980-81 and 1981-82. Three of these greenhouses were insulated. The reference house was a single layer glasshouse with a mobile shading curtain, which was drawn at night. A comparison with the reference house showed the following energy savings for the insulated houses: Double glass 29-32%, double acryllic 39%, and thermal screens 22-24%. On average the air humidity was 80-86% RH in the double acryllic greenhouse and in the double glass house, whereas the levels was 5-10% lower in the 2 greenhouses with single glass. In spite of the high air humidity in the permanently insulated houses, no plant diseases occurred. The dry matter production of seven plant species was recorded in all greenhouses on the same date. Compared with the reference house 3 of the plant species showed a 5-10% higher production in the double acryllic greenhouse as well as the house with thermal screens. The remaining 4 plant species did not show any differences, between the 3 greenhouses. In the double glass house the production was considerably lower. To study the growth in detail, Tagetes plants were grown for 3-week periods during the winter in all houses. The aim of this study was to investigate whether the ratio between the growth in the 4 greenhouses was the same when periods of high light intensity were compared to periods with low light intensity. No characteristic changes with increasing light intensities could be observed between the different greenhouses. The differences between the greenhouses in time of production for the pot plants were generally small. The most remarkable difference in plant quality between the houses could be seen with Chrysanthemum and Kalanchoe. These 2 plant species were considerably less compact in the double acryllic greenhouse. Chrysanthemum was also less compact in the double glass house.

Electrical condition monitoring method for polymers

Science.gov (United States)

Watkins, Jr. Kenneth S.; Morris, Shelby J.; Masakowski, Daniel D.; Wong, Ching Ping; Luo, Shijian

2010-02-16

An electrical condition monitoring method utilizes measurement of electrical resistivity of a conductive composite degradation sensor to monitor environmentally induced degradation of a polymeric product such as insulated wire and cable. The degradation sensor comprises a polymeric matrix and conductive filler. The polymeric matrix may be a polymer used in the product, or it may be a polymer with degradation properties similar to that of a polymer used in the product. The method comprises a means for communicating the resistivity to a measuring instrument and a means to correlate resistivity of the degradation sensor with environmentally induced degradation of the product.

Balancing development and conservation? An assessment of livelihood and environmental outcomes of nontimber forest product trade in Asia, Africa, and Latin America

NARCIS (Netherlands)

Kusters, K.; Achdiawan, R.; Belcher, B.; Ruiz Pérez, M.; Hussain, A.

2008-01-01

This chapter addresses the question, to what extent and under which conditions nontimber forest product (NTFP) trade leads to both livelihood improvement and forest conservation. We based the analysis on a standardized expert-judgment assessment of the livelihood and environmental outcomes of 55

Performance of Hybrid Corn in Different Environmental Conditions in the Region Of Sinop-MT

Directory of Open Access Journals (Sweden)

D. C. T. Souza

2013-07-01

Full Text Available Abstract: The aim of this study was to evaluate the agronomic performance of corn hybrids in environmental conditions favorable and unfavorable. For this, two experiments were conducted at Sinop / MT, being considered as favorable environmental conditions the use of fertilizer recommended for the crop at planting and coverage, and unfavorable conditions only recommended fertilization at planting. The experimental design was a randomized block with three replicates, with plots of 2 rows of 3 meters. The treatments were: double hybrid (Balu 761, single hybrids (AG 7088 and 30F90Y and triple hybrid (2B688. The characteristics evaluated were number of spikes, husked spikes weight, plant height and height of first spike. Regarding the number of ears, under favorable conditions, the hybrid double (Balu 761 and the triple hybrid (2B688 stood out against the simple hybrid. For the character number of spikes per plant, the husked spike weight in kg the triple hybrid 2B688 stood in relation to other unfavorable conditions. Considering the character plant height and first spike insertion, single hibrid 30F90Y, showed higher estimate in unfavorable conditions. In conclusion, the agronomic performance of types of hybrids varies in relation to environmental conditions and genotypes composition, and in this study the triple hybrid stood out in relation to others. Keywords: Zea mays, fertilization and breeding.

Environmental impact assessment of biofuel production on contaminated land - Swedish case studies

Energy Technology Data Exchange (ETDEWEB)

Andersson-Skoeld, Yvonne; Suer, Pascal [Swedish Geotechnical Institute, Linkoeping (Sweden); Blom, Sonja [FB Engineering AB, Goeteborg (Sweden); Bardos, Paul [r3 Environmental Technology Ltd, Reading (United Kingdom); Track, Thomas; Polland, Marcel [DECHEMA e. V., Frankfurt am Main (Germany)

2009-07-01

This report studies the (possible) cultivation of short rotation wood (Salix Vinimalis) on two contaminated sites from an environmental perspective, through a life cycle analysis (LCA) and carbon footprint, with an outlook towards an overarching method for a qualitative or semi-quantitative analysis based on a life cycle framework. Two areas were selected as case studies: a small site where short rotation crop (Salix Vinimalis) cultivation is in progress and a large site where biofuel production is hypothetical. For the selection of suitable sites, the following aspects were considered: Site location and size, so that biofuel cultivation might be economically viable without a remediation bonus, Topography and soil conditions, so that machinery could be used for cultivation, Time, so that the site was not in urgent need of remediation due to environmental or human health risks, or acute exploitation requirements, Contamination degree, which should not be plant-toxic, Contamination depth, Assessment of optimum crop and its use. For doubtful areas, it is especially important to analyse what the most viable option for the contaminated site is, and what bio-product could be used. For a more comprehensive analysis, which also incorporates local economic and social aspects, the decision support matrix, inter alia, described in the main report of the project Rejuvenate, is recommended. The calculation of emissions for the LCA and the carbon footprint used a German software tool for LCA of soil remediation. The software includes equipment emission data published in 1995. The module 'landfarming' has been used in this study to calculate emissions from herbicide application, fertilisation, ploughing and deep-ploughing, Salix harvest, harrowing etc. Since production of herbicide and Salix Vinimalis shoots were not included in the software, they were not included in the study. The conclusions for the two sites were very similar, in spite of the large differences between the

Environmental impact assessment of biofuel production on contaminated land - Swedish case studies

Energy Technology Data Exchange (ETDEWEB)

Andersson-Skoeld, Yvonne; Suer, Pascal (Swedish Geotechnical Institute, Linkoeping (Sweden)); Blom, Sonja (FB Engineering AB, Goeteborg (Sweden)); Bardos, Paul (r3 Environmental Technology Ltd, Reading (United Kingdom)); Track, Thomas; Polland, Marcel (DECHEMA e. V., Frankfurt am Main (Germany))

2009-07-01

This report studies the (possible) cultivation of short rotation wood (Salix Vinimalis) on two contaminated sites from an environmental perspective, through a life cycle analysis (LCA) and carbon footprint, with an outlook towards an overarching method for a qualitative or semi-quantitative analysis based on a life cycle framework. Two areas were selected as case studies: a small site where short rotation crop (Salix Vinimalis) cultivation is in progress and a large site where biofuel production is hypothetical. For the selection of suitable sites, the following aspects were considered: Site location and size, so that biofuel cultivation might be economically viable without a remediation bonus, Topography and soil conditions, so that machinery could be used for cultivation, Time, so that the site was not in urgent need of remediation due to environmental or human health risks, or acute exploitation requirements, Contamination degree, which should not be plant-toxic, Contamination depth, Assessment of optimum crop and its use. For doubtful areas, it is especially important to analyse what the most viable option for the contaminated site is, and what bio-product could be used. For a more comprehensive analysis, which also incorporates local economic and social aspects, the decision support matrix, inter alia, described in the main report of the project Rejuvenate, is recommended. The calculation of emissions for the LCA and the carbon footprint used a German software tool for LCA of soil remediation. The software includes equipment emission data published in 1995. The module 'landfarming' has been used in this study to calculate emissions from herbicide application, fertilisation, ploughing and deep-ploughing, Salix harvest, harrowing etc. Since production of herbicide and Salix Vinimalis shoots were not included in the software, they were not included in the study. The conclusions for the two sites were very similar, in spite of the large differences

The increasing importance of environmental conditions in amyotrophic lateral sclerosis

Science.gov (United States)

Riancho, Javier; Bosque-Varela, Pilar; Perez-Pereda, Sara; Povedano, Mónica; de Munaín, Adolfo López; Santurtun, Ana

2018-04-01

Amyotrophic lateral sclerosis (ALS) is the most common neurodegenerative disease affecting motor neurons (MNs). Although a small percentage of ALS has a familial origin, the vast majority of cases are sporadic in which genetic factors and environment interact with each other leading to disease onset in genetically predisposed individuals. In the current model of the disease, each individual has a determined genetic load, some degree of cell degeneration related to age and several risky environmental exposures. In this scenario, MN degeneration would occur when the sum of these factors reach a certain threshold. To date, an extensive list of environmental factors has been associated to ALS, including different categories, such as exposure to heavy metals and other toxicants, cyanotoxins or infectious agents. In addition, in recent years, lifestyle and other demographic parameters are gaining relevance in the genesis of the disease. Among them, physical activity, nutrition, body mass index, cardiovascular risk factors, autoimmune diseases and cancer are some of the conditions which have been related to the disease. In this review, we will discuss the potential mechanisms of environmental conditions in motor neuron degeneration. Understanding the role of each one of these factors as well as their interactions appears as a crucial step in order to develop new preventive, diagnostic and therapeutic approaches for ALS patients.

187 DISPLACEMENT AND ENVIRONMENTAL PROTECTION

African Journals Online (AJOL)

Fr. Ikenga

The national and international communities are confronted with the monumental task of ... displacement and environmental protection present a vicious cycle which today has ... Thus, issues of environmental protection viz-a-viz investment and .... out the conditions for product or process standards, the use of best available ...

Environmental system analysis of tomato production in Ghana ...

African Journals Online (AJOL)

The aim of this study was to identify the most important sources of greenhouse gases, acidifying and eutrophying compounds associated with tomato production in Ghana and identify options to reduce the environmental impacts. Life Cycle Analysis (LCA) methodology was used in the analysis (Cradle to gate approach).

Indoor environmental and air quality characteristics, building-related health symptoms, and worker productivity in a federal government building complex.

Science.gov (United States)

Lukcso, David; Guidotti, Tee Lamont; Franklin, Donald E; Burt, Allan

2016-01-01

Building Health Sciences, Inc. (BHS), investigated environmental conditions by many modalities in 71 discreet areas of 12 buildings in a government building complex that had experienced persistent occupant complaints despite correction of deficiencies following a prior survey. An online health survey was completed by 7,637 building occupants (49% response rate), a subset of whom voluntarily wore personal sampling apparatus and underwent medical evaluation. Building environmental measures were within current standards and guidelines, with few outliers. Four environmental factors were consistently associated with group-level building-related health complaints: physical comfort/discomfort, odor, job stress, and glare. Several other factors were frequently commented on by participants, including cleanliness, renovation and construction activities, and noise. Low relative humidity was significantly associated with lower respiratory and "sick building syndrome"-type symptoms. No other environmental conditions (including formaldehyde, PM10 [particulate matter with an aerodynamic diameter work but at reduced capacity), and increase in reported symptom-days, including symptoms not related to respiratory disease. We found that in buildings without unusual hazards and with environmental and air quality indicators within the range of acceptable indoor air quality standards, there is an identifiable population of occupants with a high prevalence of asthma and allergic disease who disproportionately report discomfort and lost productivity due to symptoms and that in "normal" buildings these outcome indicators are more closely associated with host factors than with environmental conditions. We concluded from the experience of this study that building-related health complaints should be investigated at the work-area level and not at a building-wide level. An occupant-centric medical evaluation should guide environmental investigations, especially when screening results of building

The shaping of environmental impacts from Danish production and consumption of clothing

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Jensen, Charlotte Louise

2012-01-01

The article analyses environmental impacts from production and consumption of clothing in Denmark based on 10 business case studies, an ethnographic study of clothing practices among a group of young women, and a statistical analysis of clothing consumption. The environmental strategies and impacts...... are shaped by the businesses' on-going interpretation of external pressures and opportunities, transnational outsourcing of production to newly industrialised countries, changes towards ‘fast fashion’ and lower retail prices. Differences are identified with respect to whether and when companies take...... a need to show environmental commitment publicly. The fast changing fashions and low price strategies encourage increased clothing consumption among young women, unused clothing in their wardrobes and frequent changes of clothing during the week. Concerns about environmental impacts are limited...

Accelerated Degradation Test and Predictive Failure Analysis of B10 Copper-Nickel Alloy under Marine Environmental Conditions

Science.gov (United States)

Sun, Bo; Ye, Tianyuan; Feng, Qiang; Yao, Jinghua; Wei, Mumeng

2015-01-01

This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu2O film increased gradually. Its corrosion product was Cu2(OH)3Cl, which increased in quantity over time. Cl− was the major factor responsible for the marine corrosion of copper and copper alloy. Through the nonlinear fitting of corrosion rate and corrosion quantity (corrosion weight loss), degradation data of different corrosion cycles, the quantitative effects of two major factors, i.e., dissolved oxygen (DO) and corrosion medium temperature, on corrosion behavior of copper alloy were analyzed. The corrosion failure prediction models under different ambient conditions were built. One-day corrosion weight loss under oxygenated stirring conditions was equivalent to 1.31-day weight loss under stationary conditions, and the corrosion rate under oxygenated conditions was 1.31 times higher than that under stationary conditions. In addition, corrosion medium temperature had a significant effect on the corrosion of B10 copper sheet. PMID:28793549

Accelerated Degradation Test and Predictive Failure Analysis of B10 Copper-Nickel Alloy under Marine Environmental Conditions.

Science.gov (United States)

Sun, Bo; Ye, Tianyuan; Feng, Qiang; Yao, Jinghua; Wei, Mumeng

2015-09-10

This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu₂O film increased gradually. Its corrosion product was Cu₂(OH)₃Cl, which increased in quantity over time. Cl - was the major factor responsible for the marine corrosion of copper and copper alloy. Through the nonlinear fitting of corrosion rate and corrosion quantity (corrosion weight loss), degradation data of different corrosion cycles, the quantitative effects of two major factors, i.e. , dissolved oxygen (DO) and corrosion medium temperature, on corrosion behavior of copper alloy were analyzed. The corrosion failure prediction models under different ambient conditions were built. One-day corrosion weight loss under oxygenated stirring conditions was equivalent to 1.31-day weight loss under stationary conditions, and the corrosion rate under oxygenated conditions was 1.31 times higher than that under stationary conditions. In addition, corrosion medium temperature had a significant effect on the corrosion of B10 copper sheet.

Accelerated Degradation Test and Predictive Failure Analysis of B10 Copper-Nickel Alloy under Marine Environmental Conditions

Directory of Open Access Journals (Sweden)

Bo Sun

2015-09-01

Full Text Available This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu2O film increased gradually. Its corrosion product was Cu2(OH3Cl, which increased in quantity over time. Cl− was the major factor responsible for the marine corrosion of copper and copper alloy. Through the nonlinear fitting of corrosion rate and corrosion quantity (corrosion weight loss, degradation data of different corrosion cycles, the quantitative effects of two major factors, i.e., dissolved oxygen (DO and corrosion medium temperature, on corrosion behavior of copper alloy were analyzed. The corrosion failure prediction models under different ambient conditions were built. One-day corrosion weight loss under oxygenated stirring conditions was equivalent to 1.31-day weight loss under stationary conditions, and the corrosion rate under oxygenated conditions was 1.31 times higher than that under stationary conditions. In addition, corrosion medium temperature had a significant effect on the corrosion of B10 copper sheet.

Environmental impact of energy production

International Nuclear Information System (INIS)

Lidgate, David

1992-01-01

Care of the environment is set to be one of the growth industries of the 1990s. Unfortunately, information as to the effect current life styles are having on the environment and, therefore, what remedial action is necessary, varies from the full to the non-existent and, worst of all, from the misleading to the incorrect. For various reasons, some aspects of technology have received greater attention from the media and environmental pressure groups than others. Energy production and conversion technologies, of course, are very much in this category. Indeed, the problem in these areas is not lack of information but a positive surfeit. (author)

Socio-environmental integration of hydropower facilities

International Nuclear Information System (INIS)

Harby, Atle; Forseth, Torbjoern; Ruud, Audun; Bakken, Tor Haakon

2017-01-01

Centre for Environmental Design of Renewable Energy (CEDREN) is a research centre focusing on hydropower production and environmental impacts of hydropower. The main objective of CEDREN is to develop and communicate design solutions for renewable energy production that address environmental and societal challenges at local, regional, national and global levels. Environmental design means that planning, building and operation have to include technical, economic, environmental and socio-political aspects throughout the whole life-span of the project. Methods and tools to ensure environmental design are developed in CEDREN and applied to case studies in Norway and internationally. These methods and tools focus on finding physical and biological bottlenecks for affected species and ecosystems by mapping, modelling and analysis of both physical conditions and ecological status. CEDREN proposes different measures, tools and methods to improve the environmental conditions as well as how to maintain or increase the power production. In addition, a strong focus must be made on political governance to ensure more representative participation of relevant stakeholders in the process of finding the best technical, economic and political solutions for power production, the environment and the society. Key research findings used to develop relationships between physical factors like flow, flow fluctuations, water temperature, water velocity, water depth and water-covered area and biological response will be shown. Examples of improved methods for better planning procedures with stakeholder engagement will be proposed. Examples of methods and tools for environmental design of hydropower will be given for several regulated rivers in Norway and abroad. (authors)

Modifying Yeast Tolerance to Inhibitory Conditions of Ethanol Production Processes

DEFF Research Database (Denmark)

Caspeta, Luis; Castillo, Tania; Nielsen, Jens

2015-01-01

Saccharomyces cerevisiae strains having a broad range of substrate utilization, rapid substrate consumption, and conversion to ethanol, as well as good tolerance to inhibitory conditions are ideal for cost-competitive ethanol production from lignocellulose. A major drawback to directly design S....... cerevisiae tolerance to inhibitory conditions of lignocellulosic ethanol production processes is the lack of knowledge about basic aspects of its cellular signaling network in response to stress. Here, we highlight the inhibitory conditions found in ethanol production processes, the targeted cellular...... functions, the key contributions of integrated -omics analysis to reveal cellular stress responses according to these inhibitors, and current status on design-based engineering of tolerant and efficient S. cerevisiae strains for ethanol production from lignocellulose....

Behavior of stressed and unstressed 304L specimens in tuff repository environmental conditions

International Nuclear Information System (INIS)

Juhas, M.C.; McCright, R.D.; Garrison, R.E.

1984-11-01

This paper presents preliminary results of an investigation of the behavior of candidate barrier material for high-level nuclear waste storage, Type 304L stainless steel, in tuff repository environmental conditions. Tuff is a densely welded, devitrified, igneous rock common to the proposed repository site at Yucca Mountain, Nevada. The results discussed include: irradiation corrosion tests, U-bend irradiation corrosion tests, slow strain rate tests, and bent beam stress corrosion tests. Results indicate that Type 304L stainless steel shows excellent resistance to general, localized, and stress corrosion under the environmental and microstructural conditions tested so far. The environmental test conditions are 50 to 100 0 C J-13 well water (non-saline, near neutral pH, and oxic in nature) and saturated steam at 100 0 C. Microstructural conditions include solution annealed and long furnace heat treatments to provoke a sensitized structure. However, this particular type of stainless steel may be susceptible to long-term, low-temperature sensitization because of the combination of expected time at elevated temperature and residual stress in the container after emplacement in the repository. Other grades of austenitic stainless steels are reported to be more resistant to low-temperature sensitization. Future work will therefore include more extensive testing of these grades. 15 references, 5 figures, 7 tables

The relation between product innovation and strategic environmental goals

DEFF Research Database (Denmark)

Gerstlberger, Wolfgang; Pedrosa, Alex; Atlason, Reynir Smari

2017-01-01

Innovation management in manufacturing firms including its environmental dimension is currently on top of the political agenda of the European Union. Existing studies only provide limited findings in this research field. By using cross-sectional data, this study investigates firms’ internal capab...... Policies (IPPs). IPPs combine the support of product innovations in general and environmental innovations in particular. Future research could apply mixed-method studies in single or multiple countries which combine different types of data....

Environmental benefits of advanced oil and gas exploration and production technology

Energy Technology Data Exchange (ETDEWEB)

None

1999-10-01

THROUGHOUT THE OIL AND GAS LIFE CYCLE, THE INDUSTRY HAS APPLIED AN ARRAY OF ADVANCED TECHNOLOGIES TO IMPROVE EFFICIENCY, PRODUCTIVITY, AND ENVIRONMENTAL PERFORMANCE. THIS REPORT FOCUSES SPECIFICALLY ON ADVANCES IN EXPLORATION AND PRODUCTION (E&P) OPERATIONS.

Energy impact of indoor environmental policy for air-conditioned offices of Hong Kong

International Nuclear Information System (INIS)

Wong, L.T.; Mui, K.W.; Shi, K.L.

2008-01-01

Air-conditioned office buildings are one of the biggest energy consumers of electricity in developed cities in the subtropical climate regions. A good energy policy for the indoor environment should respond to both the needs of energy conservation and the needs for a desirable indoor healthy environment with a reduction in carbon dioxide (CO 2 ) generation. This study evaluates energy implications and the corresponding CO 2 generation of some indoor environmental policies for air-conditioned office buildings in the subtropical climate. In particular, the thermal energy consumption in an air-conditioned office building was evaluated by the heat gains through the building fabric, the transport of outdoor fresh air for ventilation, and the heat generated by the occupant and equipment in the space. With the Monte-Carlo sampling technique and the parameters from the existing office building stocks of Hong Kong, the energy consumption profiles of air-conditioned office buildings in Hong Kong were evaluated. Energy consumption profiles were simulated for certain indoor environmental quality (IEQ) policies on indoor air temperature and CO 2 concentration settings in the offices, with other building parameters remaining unchanged. The impact assessment and the regression models described in this study may be useful for evaluation of energy performances of IEQ policies. They will also be useful for the promotion of energy-saving measures in air-conditioned office buildings in Hong Kong. This study presented a useful source of references for policymakers, building professionals and end users to quantify the energy and environmental impacts due to an IEQ policy for air-conditioned office buildings

Growth, technology, and environmental change—nonlinearity and non-constant returns

Directory of Open Access Journals (Sweden)

Wei-Bin Zhang

2002-01-01

Full Text Available This paper proposes a growth model with endogenous technology and environmental change. The economy consists of two sectors, production and environmental. The production sector produces goods with knowledge, labor, and capital as inputs under perfect competitive conditions. Knowledge accumulates through learning by doing. The environment is affected by production, consumption, the environmental sector's production efficiency, and the nature's purification. The simple model shows that it is difficult to explicitly judge the impact of factors such as environmental policy, knowledge accumulation efficiency and preference change on the environment.

Assessing the Relationship Between Chronic Health Conditions and Productivity Loss Trajectories

Science.gov (United States)

Pranksy, Glenn

2014-01-01

Objective: To examine the relationship between health conditions and the risk for membership in longitudinal trajectories of productivity loss. Methods: Trajectories of productivity loss from the ages of 25 to 44 years, previously identified in the National Longitudinal Survey of Youth (NLSY79), were combined with information on health conditions from the age 40 years health module in the NLSY79. Multinomial logistic regression was used to examine the relative risk of being in the low-risk, early-onset increasing risk, late-onset increasing risk, or high-risk trajectories compared with the no-risk trajectory for having various health conditions. Results: The trajectories with the greatest probability of productivity loss longitudinally had a greater prevalence of the individual health conditions and a greater total number of health conditions experienced. Conclusions: Health conditions are associated with specific longitudinal patterns of experiencing productivity loss. PMID:25479294

Environmental issues of petroleum exploration and production: Introduction

Science.gov (United States)

Kharaka, Yousif K.; Dorsey, Nancy S.

2005-01-01

Energy is the lifeblood of our planet Earth, an essential commod- ity that powers the expanding global economy. Starting in the 1950s, oil and natural gas became the main sources of primary energy for the increasing world population, and this dominance is expected to continue for several more decades (Edwards, 1997; Energy Information Administration (EIA), 2004). In the United States, petroleum production started in 1859 when Drake's well was drilled near Titusville, Pennsylvania, and oil and natural gas currently supply approximately 63% of the energy consumption; forecasts indicate that by 2025, their use will increase by about 40% to 28.3 million bbl/day and to 31.4 tcf/yr (EIA, 2004). The clear benefits of petroleum consumption, however, can carry major environmental impacts that may be regional or global in scale, in- cluding air pollution, global climate change, and oil spills. This vol- ume of Environmental Geosciences, covering environmental impacts of petroleum exploration and production, does not address these major impacts directly because air pollution and global warming are issues related primarily to petroleum and coal uses, and major oil spills are generally attributed to marine petroleum transportation, such as the Exxon Valdez's 1989 spill of 260,000 bbl of oil into Prince William Sound, Alaska. Exploration for and production of petroleum, however, have caused local detrimental impacts to soils, surface and groundwa- ters, and ecosystems in the 36 producing states in the United States (Richter and Kreitler, 1993; Kharaka and Hanor, 2003). These im- pacts arose primarily from the improper disposal of some of the large volumes (presently estimated at 20 billion bbl/yr total pro- duced) of saline water produced with oil and gas, from accidental hydrocarbon and produced-water releases, and from abandoned oil wells that were orphaned or not correctly plugged (Kharaka et al., 1995; Veil et al., 2004). Impacts and ground-surface disturbances, in the order

Modifying yeast tolerance to inhibitory conditions of ethanol production processes

Directory of Open Access Journals (Sweden)

Luis eCaspeta

2015-11-01

Full Text Available Saccharomyces cerevisiae strains having a broad range of substrate utilization, rapid substrate consumption and conversion to ethanol, as well as good tolerance to inhibitory conditions are ideal for cost-competitive ethanol production from lignocellulose. A major drawback to directly design S. cerevisiae tolerance to inhibitory conditions of lignocellulosic ethanol production processes is the lack of knowledge about basic aspects of its cellular signaling network in response to stress. Here we highlight the inhibitory conditions found in ethanol production processes, the targeted cellular functions, the key contributions of integrated –omics analysis to reveal cellular stress responses according to these inhibitors, and current status on design-based engineering of tolerant and efficient S. cerevisiae strains for ethanol production from lignocellulose.

Emerging sustainable/green cleaning products: health and environmental risks

OpenAIRE

Aydin, Mehmet Cihan; Işik, Ercan; Ulu, Ali Emre

2016-01-01

Sustainable development aims to bring a new perspective to our lives without compromising customer needs and quality. Along with sustainable development many innovative solutions came out. One of them is sustainable green cleaning products and techniques. Today, emissions from conventional cleaning products may cause severe health and environmental issues. Especially sick building syndromes such as eye, skin and respiratory irritations are main health effects of them. They may also contrib...

Green energy criteria and life cycle assessment in assessing environmental competitiveness of energy products

International Nuclear Information System (INIS)

Maelkki, H.; Hongisto, M.; Turkulainen, T.; Kuisma, J.; Loikkanen, T.

1999-01-01

The liberalisation of energy markets has increased the need to enlarge the information base of fuel chains, to evaluate the environmental quality of energy products transparently and to communicate results in a credible way. The preparedness of energy purchasers, producers and sellers to support energy choices of their customers and to meet the information requirements of various stake holders can be strengthened. The environmental impacts related to energy products are turning into a significant dimension of competitiveness. Possibilities to promote market-driven environmental protection mechanisms and to construct incentives, which cover the whole energy production system exist and can be supported. Knowledge of environmental impacts of various energy products can be increased by means of several supplementary instruments like eco-profiles, environmental labels and life cycle assessments of products. Life cycle assessment forms a systematic basis of information, which supports the environmental communications directed to various stake holders. In this study selected public LCA-studies concerning energy production have been compared, criteria of green energy have been charted and their outlook has been assessed. In addition the development of an LCA- based relative environmental performance indicator system, which supports various transparent comparisons, has been outlined. The mapping of methodological differences of published LCA-studies regarding various energy alternatives proves, that there is differences e.g. in allocation principles, system boundaries, and age of source information and in many other details. These discrepancies should be known, because they also affect the results. That is why the use of available LCA studies as a basis for comparative assertions may be problematic. The renewability of an energy source is a threshold requirement in eco-energy criteria formulated and introduced by Finnish, Swedish and Norwegian nature conservation

Implementation plan for the new production reactor capacity environmental impact statement

International Nuclear Information System (INIS)

1989-12-01

The US Department of Energy (DOE) proposed to site, construct, and operate new production reactor (NPR) capacity intended primarily to produce tritium and secondarily to produce plutonium for the US nuclear weapons program. DOE studies show that this new capacity is needed to ensure reliable maintenance of the nation's nuclear weapons stockpile. It also is essential that these necessary nuclear materials be produced in a safe and environmentally sound manner. The DOE has determined that this proposed action constitutes a major federal action that may significantly affect the quality of the human environment; therefore, the DOE will prepare an environmental impact statement (EIS) to assess the potential impacts of the proposed action and reasonable alternatives on the human and natural environment. The EIS will be prepared in accordance with the National Environmental Policy Act of 1969, as implemented in regulations promulgated by the Council on Environmental Quality (CEQ). This EIS implementation plan (IP) includes a description of the proposed action, descriptions of alternatives, a summary of EIS assumptions, a list of environmental issues to be considered in the EIS (including those identified during public scoping activities), a list of proposed agency consultations, a schedule for EIS preparation and related activities, and an annotated outline for the EIS. It is the Department's intent that the EIS on the NPR capacity will serve as the programmatic National Environmental Policy Act (NEPA) review of modernization of DOE defense nuclear materials production of tritium and plutonium. The Department is currently developing a NEPA compliance strategy for modernization of the remainder of the nuclear weapons production complex, which will reference the EIS on NPR capacity. 7 refs., 8 tabs

Model for Environmental Assessment of Industrial Production Systems: A Case Study in a Plastic Manufacturing Firm

Directory of Open Access Journals (Sweden)

Francine Comunello

2017-05-01

Full Text Available The environmental issue has been discussed sharply in the organizational environment, as consumers, and society in general, have been increasingly concerned about the environment. In this sense, the companies, especially the factories, seek to minimize the environmental impact caused by its production processes through actions that combine the organization's economic interests with environmental concerns. Thus, this article aims to analyze how environmental management of the productive sector is being carried out at Industria Beta Chapecó/SC. Therefore, we developed a qualitative and descriptive research in order to apply the Model for Environmental Assessment of Industrial Production Systems (MAASPI in the production of Industria Beta sector. The results showed the main environmental interventions caused by the production process of the organization, particularly the interventions for the consumption of electricity, plant location and chip storage. As main proposals to minimize negative environmental impacts, we have the installation of translucent tiles in the production environment, a study on energy efficiency, construction of water and soil testing, construction of waste storage terminals and implementation of the pre-selection of the raw material. The realization of the suggested adjustments enables Industria Beta to foresee the legal environmental requirements, to aim for enviromental certifications and seals and to strengthen its image as environment-friendly with collaborators and society in general.

Optimization of fermentation conditions for red pigment production ...

African Journals Online (AJOL)

An extracellular pigment-producing ascomycetous filamentous fungi belonging to the genera Penicillium was obtained from soil and its optimal culture conditions investigated. The optimal culture conditions for pigment production were as follows; soluble starch 2% (670 units), peptone (880 units), pH 9.0 (900 units); ...

Effects of Mesophilic and Thermophilic Temperature Condition to Biogas Production (Methane from Palm Oil Mill Effluent (POME with Cow Manures

Directory of Open Access Journals (Sweden)

Muhammad Fajar Fajar

2018-01-01

Full Text Available Biogas is an environmentally friendly renewable energy source. Biogas can be used using Palm Oil Mill Effluents (POME. However, the % yield of biogas productivity is still not optimum due to the low conversion. The biogas productivity can be optimized by adding methanogen bacteria which increase the methane production through the anaerobic fermentation process. This study aims to utilize cow manures as the source of methanogen bacteria in methane production from POME. Furthermore, this study specifically aims to obtain the optimum productivity condition of biogas production by the composition ratio of POME and cow manures to the amount of fermentation time at 35oC and 50oC for mesophilic and thermophilic bacteria, respectively. The ratio of POME and cow mature were A1 (100:0, A2 (80:20, A3 (70:30, A4 (60:40, and A5 (0:100. The highest yield of biogas production was A2 ratio using the thermophilic condition which showed 51.33% mol with the total solid decline of 73.43%, COD removal of 77.01%, and BOD removal of 70.02%.

Multiscale effects of management, environmental conditions, and land use on nitrate leaching in dairy farms.

Science.gov (United States)

Oenema, Jouke; Burgers, Saskia; Verloop, Koos; Hooijboer, Arno; Boumans, Leo; ten Berge, Hein

2010-01-01

Nitrate leaching in intensive grassland- and silage maize-based dairy farming systems on sandy soil is a main environmental concern. Here, statistical relationships are presented between management practices and environmental conditions and nitrate concentration in shallow groundwater (0.8 m depth) at farm, field, and point scales in The Netherlands, based on data collected in a participatory approach over a 7-yr period at one experimental and eight pilot commercial dairy farms on sandy soil. Farm milk production ranged from 10 to 24 Mg ha(-1). Soil and hydrological characteristics were derived from surveys and weather conditions from meteorological stations. Statistical analyses were performed with multiple regression models. Mean nitrate concentration at farm scale decreased from 79 mg L(-1) in 1999 to 63 in 2006, with average nitrate concentration in groundwater decreasing under grassland but increasing under maize land over the monitoring period. The effects of management practices on nitrate concentration varied with spatial scale. At farm scale, nitrogen surplus, grazing intensity, and the relative areas of grassland and maize land significantly contributed to explaining the variance in nitrate concentration in groundwater. Mean nitrate concentration was negatively correlated to the concentration of dissolved organic carbon in the shallow groundwater. At field scale, management practices and soil, hydrological, and climatic conditions significantly contributed to explaining the variance in nitrate concentration in groundwater under grassland and maize land. We conclude that, on these intensive dairy farms, additional measures are needed to comply with the European Union water quality standard in groundwater of 50 mg nitrate L(-1). The most promising measures are omitting fertilization of catch crops and reducing fertilization levels of first-year maize in the rotation.

Environmental monitoring and management of contaminated territories for clean product production

International Nuclear Information System (INIS)

Goncharova, N.; Bajrasheuskaya, D.; Laberch, J.-C.; Pohu, J.

2006-01-01

Current research interests are focussing into two major research problems with immense environmental importance and impact to society. These two areas of interest are (a) the radioactive pollution of an ecosystem and, particularly, the behavior of the radionuclides in soil and the pollution of plants which participate in human's food and (b) the production of municipal solid wastes and the problem of uncontrolled disposal and its negative effects to the environment. (authors)

Spatio-temporal patterns and environmental controls of small pelagic fish body condition from contrasted Mediterranean areas

Science.gov (United States)

Brosset, Pablo; Fromentin, Jean-Marc; Van Beveren, Elisabeth; Lloret, Josep; Marques, Virginie; Basilone, Gualtiero; Bonanno, Angelo; Carpi, Piera; Donato, Fortunata; Čikeš Keč, Vanja; De Felice, Andrea; Ferreri, Rosalia; Gašparević, Denis; Giráldez, Ana; Gücü, Ali; Iglesias, Magdalena; Leonori, Iole; Palomera, Isabel; Somarakis, Stylianos; Tičina, Vjekoslav; Torres, Pedro; Ventero, Ana; Zorica, Barbara; Ménard, Frédéric; Saraux, Claire

2017-02-01

Small pelagic fish are among the most ecologically and economically important marine fish species and are characterized by large fluctuations all over the world. In the Mediterranean Sea, low catches and biomass of anchovies and sardines have been described in some areas during the last decade, resulting in important fisheries crises. Therefore, we studied anchovy and sardine body condition variability, a key index of population health and its response to environmental and anthropogenic changes. Wide temporal and spatial patterns were investigated by analyzing separately data from scientific surveys and fisheries in eight Mediterranean areas between 1975 and 2015. Results showed that anchovy and sardine body condition as well as maximum size in some areas sharply decreased in most Mediterranean areas along years (except in the Northern Alboran Sea). Despite this general pattern, well-marked environmental differences between sub-regions were highlighted by several analyses and variations in body condition were not found to be homogeneous over all the Mediterranean Sea. Further, other analyses revealed that except for the Adriatic where major changes towards a lower body condition were concomitant with a decrease in river runoffs and chl-a concentration, no concomitant environmental regime shift was detected in other areas. Together, these analyses highlighted the current poor body condition of almost all small pelagic fish populations in the Mediterranean. Yet, global environmental indices could not explain the observed changes and the general decrease in condition might more likely come from regional environmental and/or anthropogenic (fishing) effects. A prolonged state of poor fish body condition, together with an observed reduced size and early age-at-maturity may have strong ecological, economic and social consequences all around the Mediterranean Sea.

The effect and role of environmental conditions on magnetosome synthesis

Directory of Open Access Journals (Sweden)

Cristina eMoisescu

2014-02-01

Full Text Available Magnetotactic bacteria (MTB are considered the model species for the controlled biomineralization of magnetic Fe oxide (magnetite, Fe3O4 or Fe sulfide (greigite, Fe3S4 nanocrystals in living organisms. In MTB, magnetic minerals form as membrane-bound, single-magnetic domain crystals known as magnetosomes and the synthesis of magnetosomes by MTB is a highly controlled process at the genetic level. Magnetosome crystals reveal highest purity and highest quality magnetic properties and are therefore increasingly sought after as novel nanoparticulate biomaterials for industrial and medical applications. In addition, magnetofossils, have been used as both past terrestrial and potential Martian life biosignature. However, until recently, the general belief was that the morphology of mature magnetite crystals formed by MTB was largely unaffected by environmental conditions. Here we review a series of studies that showed how changes in environmental factors such as temperature, pH, external Fe concentration, external magnetic fields, static or dynamic fluid conditions, and nutrient availability or concentrations can all affect the biomineralization of magnetite magnetosomes in MTB. The resulting variations in magnetic nanocrystals characteristics can have consequence both for their commercial value but also for their use as indicators for ancient life.In this paper we will review the recent findings regarding the influence of variable chemical and physical environmental control factors on the synthesis of magnetosome by MTB, and address the role of MTB in the global biogeochemical cycling of iron.

Detection of respiratory viruses in shelter dogs maintained under varying environmental conditions

Directory of Open Access Journals (Sweden)

Francielle Liz Monteiro

Full Text Available Abstract Three dog shelters in Rio Grande do Sul were investigated for associations between the occurrence of respiratory viruses and shelter environmental conditions. Nasal secretions randomly collected during the cold season were tested via PCR, and this data collection was followed by nucleotide sequencing of the amplicons. In shelter #1 (poor sanitary and nutritional conditions, high animal density and constant contact between dogs, 78% (58/74 of the nasal samples were positive, 35% (26/74 of which were in single infections and 44% (32/74 of which were in coinfections. Shelters #2 and #3 had satisfactory sanitary and nutritional conditions, outdoors exercise areas (#2 and animal clustering by groups (#3. In shelter #2, 9% (3/35 of the samples were positive for Canine parainfluenza virus (CPIV, and 6% (2/35 were positive for Canid herpesvirus 1 (CaHV-1. In shelter #3, 9% (7/77 of the samples were positive for Canine adenovirus type 2 (CAdV-2, and 1% (1/77 were positive for Canine distemper virus (CDV. The amplicon sequences (CPIV and CDV nucleoprotein gene; CAdV-2 E3 gene; CaHV-1 glycoprotein B gene showed 94-100% nucleotide identity with GenBank sequences. Our results demonstrate that CPIV, CAdV-2 and CDV are common in dog shelters and that their frequencies appear to be related with environmental and nutritional conditions. These results indicate the need for control/prevention measures, including vaccination and environmental management, to minimize these infections and improve dog health.

Life cycle assessment of biofuel production from brown seaweed in Nordic conditions

DEFF Research Database (Denmark)

Alvarado-Morales, Merlin; Boldrin, Alessio; Karakashev, Dimitar Borisov

2013-01-01

the sustainability of the process. Two scenarios were analyzed for the brownseaweed (Laminaria digitata), namely, biogas production (scenario 1) and bioethanol + biogas production (scenario 2). Potential environmental impact categories under investigation were Global Warming, Acidification and Terrestrial...

Lessons from spatial and environmental assessment of energy potentials for Anaerobic Digestion production systems applied to the Netherlands

International Nuclear Information System (INIS)

Pierie, F.; Benders, R.M.J.; Bekkering, J.; Gemert, W.J.Th. van; Moll, H.C.

2016-01-01

Highlights: • There is a substantial gap between bio-energy potential and net energy gain. • For reaching production goals the green gas utilization pathway is preferable. • Environmental sustainability favors the waste management pathway. • Renewable energy production goals and environmental sustainability do not always align. • There is a gap between top–down regulation and actual emission reduction and sustainability. - Abstract: Anaerobic digestion (AD) can play an important role in achieving the renewable energy goals set within the European Union. Within this article the focus is placed on reaching the Dutch local renewable production goal set for the year 2020 with locally available biomass waste flows, avoiding intensive farming and long transport distances of biomass and energy carriers. The bio-energy yields, efficiency and environmental sustainability are analyzed for five municipalities in the northern part of the Netherlands, using three utilization pathways: green gas production, combined heat and power, and waste management. Literature has indicated that there is sufficient bio-energy potential in local waste streams to reach the aforementioned goal. However, the average useful energy finally produced by the AD production pathway is significantly lower, often due to poor quality biomass and difficult harvesting conditions. Furthermore, of the potential bio-energy input in the three utilization pathways considered in this article, on average: 73% can be extracted as green gas; 57% as heat and power; and 44% as green gas in the waste management pathway. This demonstrates that the Dutch renewable production goal cannot be reached. The green gas utilization pathway is preferable for reaching production goals as it retains the highest amount of energy from the feedstock. However, environmental sustainability favors the waste management pathway as it has a higher overall efficiency, and lower emissions and environmental impacts. The main

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Modelling the effects of environmental conditions on the acoustic occurrence and behaviour of Antarctic blue whales.

Directory of Open Access Journals (Sweden)

Fannie W Shabangu

Full Text Available Harvested to perilously low numbers by commercial whaling during the past century, the large scale response of Antarctic blue whales Balaenoptera musculus intermedia to environmental variability is poorly understood. This study uses acoustic data collected from 586 sonobuoys deployed in the austral summers of 1997 through 2009, south of 38°S, coupled with visual observations of blue whales during the IWC SOWER line-transect surveys. The characteristic Z-call and D-call of Antarctic blue whales were detected using an automated detection template and visual verification method. Using a random forest model, we showed the environmental preferences pattern, spatial occurrence and acoustic behaviour of Antarctic blue whales. Distance to the southern boundary of the Antarctic Circumpolar Current (SBACC, latitude and distance from the nearest Antarctic shores were the main geographic predictors of blue whale call occurrence. Satellite-derived sea surface height, sea surface temperature, and productivity (chlorophyll-a were the most important environmental predictors of blue whale call occurrence. Call rates of D-calls were strongly predicted by the location of the SBACC, latitude and visually detected number of whales in an area while call rates of Z-call were predicted by the SBACC, latitude and longitude. Satellite-derived sea surface height, wind stress, wind direction, water depth, sea surface temperatures, chlorophyll-a and wind speed were important environmental predictors of blue whale call rates in the Southern Ocean. Blue whale call occurrence and call rates varied significantly in response to inter-annual and long term variability of those environmental predictors. Our results identify the response of Antarctic blue whales to inter-annual variability in environmental conditions and highlighted potential suitable habitats for this population. Such emerging knowledge about the acoustic behaviour, environmental and habitat preferences of

Modelling the effects of environmental conditions on the acoustic occurrence and behaviour of Antarctic blue whales.

Science.gov (United States)

Shabangu, Fannie W; Yemane, Dawit; Stafford, Kathleen M; Ensor, Paul; Findlay, Ken P

2017-01-01

Harvested to perilously low numbers by commercial whaling during the past century, the large scale response of Antarctic blue whales Balaenoptera musculus intermedia to environmental variability is poorly understood. This study uses acoustic data collected from 586 sonobuoys deployed in the austral summers of 1997 through 2009, south of 38°S, coupled with visual observations of blue whales during the IWC SOWER line-transect surveys. The characteristic Z-call and D-call of Antarctic blue whales were detected using an automated detection template and visual verification method. Using a random forest model, we showed the environmental preferences pattern, spatial occurrence and acoustic behaviour of Antarctic blue whales. Distance to the southern boundary of the Antarctic Circumpolar Current (SBACC), latitude and distance from the nearest Antarctic shores were the main geographic predictors of blue whale call occurrence. Satellite-derived sea surface height, sea surface temperature, and productivity (chlorophyll-a) were the most important environmental predictors of blue whale call occurrence. Call rates of D-calls were strongly predicted by the location of the SBACC, latitude and visually detected number of whales in an area while call rates of Z-call were predicted by the SBACC, latitude and longitude. Satellite-derived sea surface height, wind stress, wind direction, water depth, sea surface temperatures, chlorophyll-a and wind speed were important environmental predictors of blue whale call rates in the Southern Ocean. Blue whale call occurrence and call rates varied significantly in response to inter-annual and long term variability of those environmental predictors. Our results identify the response of Antarctic blue whales to inter-annual variability in environmental conditions and highlighted potential suitable habitats for this population. Such emerging knowledge about the acoustic behaviour, environmental and habitat preferences of Antarctic blue whales is

Environmental Priorities In Strategic Product Development

DEFF Research Database (Denmark)

Simon, M; Poole, S.; Sweatman, A.

2000-01-01

-design framework consisting of analyse, report, prioritize and improve steps, at both strategic and operational levels. Tests the framework by application in an Electrolux subsidiary producing vacuum cleaners, tabulates LCA results for one product and its constituents and components. Concludes that prioritizing......Reports progress of the Design for Environmental Decision Support (DEEDS) project, gives the project's aim as the development of appropriate tools and methods for eco-design for use in the electrical/electronics sector. Bases development of the tools and methods on the results of a survey of 19...

Linking legacies: Connecting the Cold War nuclear weapons production processes to their environmental consequences

International Nuclear Information System (INIS)

1997-01-01

In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In support of this effort, the National Defense Authorization Act for Fiscal Year 1995 directed the Department of Energy (DOE) to describe the waste streams generated during each step in the production of nuclear weapons. Accordingly, this report responds to this mandate, and it is the Department's first comprehensive analysis of the sources of waste and contamination generated by the production of nuclear weapons. The report also contains information on the missions and functions of nuclear weapons facilities, on the inventories of waste and materials remaining at these facilities, as well as on the extent and characteristics of contamination in and around these facilities. This analysis unites specific environmental impacts of nuclear weapons production with particular production processes. The Department used historical records to connect nuclear weapons production processes with emerging data on waste and contamination. In this way, two of the Department's legacies--nuclear weapons manufacturing and environmental management--have become systematically linked. The goal of this report is to provide Congress, DOE program managers, non-governmental analysts, and the public with an explicit picture of the environmental results of each step in the nuclear weapons production and disposition cycle

Linking legacies: Connecting the Cold War nuclear weapons production processes to their environmental consequences

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In support of this effort, the National Defense Authorization Act for Fiscal Year 1995 directed the Department of Energy (DOE) to describe the waste streams generated during each step in the production of nuclear weapons. Accordingly, this report responds to this mandate, and it is the Department`s first comprehensive analysis of the sources of waste and contamination generated by the production of nuclear weapons. The report also contains information on the missions and functions of nuclear weapons facilities, on the inventories of waste and materials remaining at these facilities, as well as on the extent and characteristics of contamination in and around these facilities. This analysis unites specific environmental impacts of nuclear weapons production with particular production processes. The Department used historical records to connect nuclear weapons production processes with emerging data on waste and contamination. In this way, two of the Department`s legacies--nuclear weapons manufacturing and environmental management--have become systematically linked. The goal of this report is to provide Congress, DOE program managers, non-governmental analysts, and the public with an explicit picture of the environmental results of each step in the nuclear weapons production and disposition cycle.

Environmental consequences of different beef production systems in the EU

DEFF Research Database (Denmark)

Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

2010-01-01

The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied - three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis......, the contributions from the production of 1 kg beef meat (slaughter weight) to global warming, acidification, eutrophication, land use and non-renewable energy use were lower for beef from dairy calves than from suckler herds (16.0-19.9 versus 27.3 kg CO2e, 101-173 versus 210 g SO2e, 622-1140 versus 1651 g NO3e, 16.......5-22.7 versus 42.9 m2year, and 41.3-48.2 versus 59.2 MJ, respectively). The breakdown analysis helped identify the key areas in the "cradle to farm gate" beef production system where sustainable management strategies are needed to improve environmental performance. The study also included a sensitivity analysis...

UTILIZATION OF BY-PRODUCT OF CHEESEMAKING AGRIBUSINESS INDUSTRY FOR DEVELOPMENT OF FOOD PRODUCTS AND REDUCTION OF THE ENVIRONMENTAL IMPACT

Directory of Open Access Journals (Sweden)

Ana Lúcia Becker Rohlfes

2014-05-01

Full Text Available The uses of by-products of cheese industry is still not significant in Brazil, since about 15% of liquid whey is used as raw material in food industry technology. The liquid whey has excellent technological properties, making it an alternative to minimize environmental impacts, besides it enables the use of the same nutritional properties in the production of new food products or adding value to the existing ones. The present study aimed to use liquid whey as an ingredient in the formulation of ice cream, hard candies, ham and breads, as well as to evaluate the influence of it in technological characteristics of the products and to quantify the volume of whey used. In order to evaluate the use of liquid whey, the products were developed with partial or total replacement of milk or water by whey, being the substitution accompanied by the determination of centesimal composition, as well as evaluating the visual characteristics of each product. The results show that the preparation of the products under study with substitution of raw milk or water is viable, proving that using liquid whey is a technological possibility of using a by-product considered to be an environmental pollutant. It was concluded that the use of liquid whey in the food industry reduces the environmental impact, since there is a reduction in the volume of whey discharged into the environment.

Remotely Sensed Environmental Conditions and Malaria Mortality in Three Malaria Endemic Regions in Western Kenya.

Directory of Open Access Journals (Sweden)

Maquins Odhiambo Sewe

Full Text Available Malaria is an important cause of morbidity and mortality in malaria endemic countries. The malaria mosquito vectors depend on environmental conditions, such as temperature and rainfall, for reproduction and survival. To investigate the potential for weather driven early warning systems to prevent disease occurrence, the disease relationship to weather conditions need to be carefully investigated. Where meteorological observations are scarce, satellite derived products provide new opportunities to study the disease patterns depending on remotely sensed variables. In this study, we explored the lagged association of Normalized Difference Vegetation Index (NVDI, day Land Surface Temperature (LST and precipitation on malaria mortality in three areas in Western Kenya.The lagged effect of each environmental variable on weekly malaria mortality was modeled using a Distributed Lag Non Linear Modeling approach. For each variable we constructed a natural spline basis with 3 degrees of freedom for both the lag dimension and the variable. Lag periods up to 12 weeks were considered. The effect of day LST varied between the areas with longer lags. In all the three areas, malaria mortality was associated with precipitation. The risk increased with increasing weekly total precipitation above 20 mm and peaking at 80 mm. The NDVI threshold for increased mortality risk was between 0.3 and 0.4 at shorter lags.This study identified lag patterns and association of remote- sensing environmental factors and malaria mortality in three malaria endemic regions in Western Kenya. Our results show that rainfall has the most consistent predictive pattern to malaria transmission in the endemic study area. Results highlight a potential for development of locally based early warning forecasts that could potentially reduce the disease burden by enabling timely control actions.

Feed Materials Production Center annual environmental report for calendar 1989

Energy Technology Data Exchange (ETDEWEB)

Dugan, T.A.; Gels, G.L.; Oberjohn, J.S.; Rogers, L.K.

1990-10-01

The mission of the Department of Energy's (DOE) Feed Materials Production Center (FMPC) has been to process uranium for United States' defense programs. On July 10, 1989, the FMPC suspended production operations, but remains on standby for certain segments of production. The FMPC also manages the storage of some radioactive and hazardous materials. As part of its operations, the FMPC continuously monitors the environment to determine that it is operating within federal and state standards and guidelines regarding emission of radioactive and nonradioactive materials. Data collected from the FMPC monitoring program are used to calculate estimates of radiation dose for residents due to FMPC operations. For 1989, the estimate of dose through the air pathway, excluding radon, indicated that people in the area were exposed to less than 6% of the DOE guideline established to protect the public from radiation exposure. When radon emissions are included, the dose from FMPC operations during 1989 was less than 22% of the annual background radiation dose in the Greater Cincinnati area. This report is a summary of FMPC's environmental activities and monitoring program for 1989. An Environmental Compliance Self-Assessment presents the FMPC's efforts to comply with environmental regulations through June 1990. 44 refs., 48 figs.

Thermal comfort index and infrared temperatures for lambs subjected to different environmental conditions

Directory of Open Access Journals (Sweden)

Tiago do Prado Paim

2014-10-01

Full Text Available There is an abundance of thermal indices with different input parameters and applicabilities. Infrared thermography is a promising technique for evaluating the response of animals to the environment and differentiating between genetic groups. Thus, the aim of this study was to evaluate superficial body temperatures of lambs from three genetic groups under different environmental conditions, correlating these with thermal comfort indices. Forty lambs (18 males and 22 females from three genetic groups (Santa Inês, Ile de France × Santa Inês and Dorper × Santa Inês were exposed to three climatic conditions: open air, housed and artificial heating. Infrared thermal images were taken weekly at 6h, 12h and 21h at the neck, front flank, rear flank, rump, nose, skull, trunk and eye. Four thermal comfort indices were calculated using environmental measurements including black globe temperature, air humidity and wind speed. Artificial warming, provided by infrared lamps and wind protection, conserved and increased the superficial body temperature of the lambs, thus providing lower daily thermal ranges. Artificial warming did not influence daily weight gain or mortality. Skin temperatures increased along with increases in climatic indices. Again, infrared thermography is a promising technique for evaluating thermal stress conditions and differentiating environments. However, the use of thermal imaging for understanding animal responses to environmental conditions requires further study.

Activation analysis of several species of marine invertebrates as indicators of environmental conditions

International Nuclear Information System (INIS)

Fukushima, M.; Tamate, H.; Nakano, Y.

2000-01-01

Marine invertebrates are well known to accumulate trace metals from seawater, plankton, sea plants, and sediments. To test the usefulness of such organisms as a bio-indicator of environmental conditions, we have determined levels of trace elements in tissue of twelve species of marine invertebrates by photon and neutron activation analysis. Relatively higher concentration of elements were observed for Ni and Sn in mid-gut gland, for Cu and Zn in oyster tissues, for Se in swimming crabs, for Cu, Fe, and Se in gills of swimming crabs. Our results indicate that mid-gut gland of ear-shell will be useful as the indicator of environmental conditions. (author)

Concept Study: Exploration and Production in Environmentally Sensitive Arctic Areas

Energy Technology Data Exchange (ETDEWEB)

Shirish Patil; Rich Haut; Tom Williams; Yuri Shur; Mikhail Kanevskiy; Cathy Hanks; Michael Lilly

2008-12-31

participants believe that the platform concept could have far-reaching applications in the Arctic as a drilling and production platform, as originally intended, and as a possible staging area. The overall objective of this project was to document various potential applications, locations, and conceptual designs for the inland platform serving oil and gas operations on the Alaska North Slope. The University of Alaska Fairbanks assisted the HARC/TerraPlatforms team with the characterization of potential resource areas, geotechnical conditions associated with continuous permafrost terrain, and the potential end-user evaluation process. The team discussed the various potential applications with industry, governmental agencies, and environmental organizations. The benefits and concerns associated with industry's use of the technology were identified. In this discussion process, meetings were held with five operating companies (22 people), including asset team leaders, drilling managers, HSE managers, and production and completion managers. Three other operating companies and two service companies were contacted by phone to discuss the project. A questionnaire was distributed and responses were provided, which will be included in the report. Meetings were also held with State of Alaska Department of Natural Resources officials and U.S. Bureau of Land Management regulators. The companies met with included ConcoPhillips, Chevron, Pioneer Natural Resources, Fairweather E&P, BP America, and the Alaska Oil and Gas Association.

Sustainability evaluation of Sicily's lemon and orange production: an energy, economic and environmental analysis.

Science.gov (United States)

Pergola, M; D'Amico, M; Celano, G; Palese, A M; Scuderi, A; Di Vita, G; Pappalardo, G; Inglese, P

2013-10-15

The island of Sicily has a long standing tradition in citrus growing. We evaluated the sustainability of orange and lemon orchards, under organic and conventional farming, using an energy, environmental and economic analysis of the whole production cycle by using a life cycle assessment approach. These orchard systems differ only in terms of a few of the inputs used and the duration of the various agricultural operations. The quantity of energy consumption in the production cycle was calculated by multiplying the quantity of inputs used by the energy conversion factors drawn from the literature. The production costs were calculated considering all internal costs, including equipment, materials, wages, and costs of working capital. The performance of the two systems (organic and conventional), was compared over a period of fifty years. The results, based on unit surface area (ha) production, prove the stronger sustainability of the organic over the conventional system, both in terms of energy consumption and environmental impact, especially for lemons. The sustainability of organic systems is mainly due to the use of environmentally friendly crop inputs (fertilizers, not use of synthetic products, etc.). In terms of production costs, the conventional management systems were more expensive, and both systems were heavily influenced by wages. In terms of kg of final product, the organic production system showed better environmental and energy performances. Copyright © 2013 Elsevier Ltd. All rights reserved.

Biofuels and their by-products: Global economic and environmental implications

International Nuclear Information System (INIS)

Taheripour, Farzad; Hertel, Thomas W.; Tyner, Wallace E.; Beckman, Jayson F.; Birur, Dileep K.

2010-01-01

Recently a number of papers have used general equilibrium models to study the economy-wide and environmental consequences of the first generation of biofuels (FGB). In this paper, we argue that nearly all of these studies have overstated the impacts of FGB on global agricultural and land markets due to the fact that they have ignored the role of biofuel by-products. Feed by-products of FGB, such as dried distillers grains with solubles (DDGS) and oilseed meals (VOBP), are used in the livestock industry as protein and energy sources. Their presence mitigates the price impacts of biofuel production. More importantly, they reduce the demand for cropland and moderate the indirect land use consequences of FGB. This paper explicitly introduces DDGS and VOBP into a global computational general equilibrium (CGE) model, developed at the Center for Global Trade Analysis at Purdue University, to examine the economic and environmental impacts of regional and international mandate policies designed to stimulate bioenergy production and use. We show that models with and without by-products reveal different portraits of the economic impacts of the US and EU biofuel mandates for the world economy in 2015. While both models demonstrate significant changes in the agricultural production pattern across the world, the model with by-products shows smaller changes in the production of cereal grains and larger changes for oilseeds products in the US and EU, and the reverse for Brazil. Models that omit by-products are found to overstate cropland conversion from US and EU mandates by about 27%. (author)

Extractant Screening for Liquid-Liquid Extraction in Environmentally Benign Production Routes

NARCIS (Netherlands)

Krzyzaniak, A.; Schuur, B.; Sukumaran, M.; Zuilhof, H.; Haan, de A.B.

2011-01-01

Fermentation processes offer a promising alternative for the production of chemicals by more environmentally benign routes. However, a major challenge in applying this technology remains the recovery of typically highly hydrophilic products from the complex broth. Here, we report the results of a

Comparing the environmental footprints of home-care and personal-hygiene products: the relevance of different life-cycle phases.

Science.gov (United States)

Koehler, Annette; Wildbolz, Caroline

2009-11-15

An in-depth life-cycle assessment of nine home-care and personal-hygiene products was conducted to determine the ecological relevance of different life-cycle phases and compare the environmental profiles of products serving equal applications. Using detailed data from industry and consumer-behavior studies a broad range of environmental impacts were analyzed to identify the main drivers in each life-cycle stage and potentials for improving the environmental footprints. Although chemical production significantly adds to environmental burdens, substantial impacts are caused in the consumer-use phase. As such, this research provides recommendations for product development, supply chain management, product policies, and consumer use. To reduce environmental burdens products should, for instance, be produced in concentrated form, while consumers should apply correct product dosages and low water temperatures during product application.