Environmental impact assessment of transportation projects: An analysis using an integrated GIS, remote sensing, and spatial modeling approach

Science.gov (United States)

El-Gafy, Mohamed Anwar

Transportation projects will have impact on the environment. The general environmental pollution and damage caused by roads is closely associated with the level of economic activity. Although Environmental Impact Assessments (EIAs) are dependent on geo-spatial information in order to make an assessment, there are no rules per se how to conduct an environmental assessment. Also, the particular objective of each assessment is dictated case-by-case, based on what information and analyses are required. The conventional way of Environmental Impact Assessment (EIA) study is a time consuming process because it has large number of dependent and independent variables which have to be taken into account, which also have different consequences. With the emergence of satellite remote sensing technology and Geographic Information Systems (GIS), this research presents a new framework for the analysis phase of the Environmental Impact Assessment (EIA) for transportation projects based on the integration between remote sensing technology, geographic information systems, and spatial modeling. By integrating the merits of the map overlay method and the matrix method, the framework analyzes comprehensively the environmental vulnerability around the road and its impact on the environment. This framework is expected to: (1) improve the quality of the decision making process, (2) be applied both to urban and inter-urban projects, regardless of transport mode, and (3) present the data and make the appropriate analysis to support the decision of the decision-makers and allow them to present these data to the public hearings in a simple manner. Case studies, transportation projects in the State of Florida, were analyzed to illustrate the use of the decision support framework and demonstrate its capabilities. This cohesive and integrated system will facilitate rational decisions through cost effective coordination of environmental information and data management that can be tailored to

A comparison of the environmental impact of pesticide use in integrated and conventional potato cultivation in the Netherlands

NARCIS (Netherlands)

Jong, de F.M.W.; Snoo, de G.R.

2002-01-01

To reduce the environmental impact of agriculture in The Netherlands, a number of labels and certification schemes for integrated farming exist. This article compares the pesticide use associated with ware-potato cultivation by integrated and conventional methods, the former as certified under the

Creating a spatial multi-criteria decision support system for energy related integrated environmental impact assessment

International Nuclear Information System (INIS)

Wanderer, Thomas; Herle, Stefan

2015-01-01

By their spatially very distributed nature, profitability and impacts of renewable energy resources are highly correlated with the geographic locations of power plant deployments. A web-based Spatial Decision Support System (SDSS) based on a Multi-Criteria Decision Analysis (MCDA) approach has been implemented for identifying preferable locations for solar power plants based on user preferences. The designated areas found serve for the input scenario development for a subsequent integrated Environmental Impact Assessment. The capabilities of the SDSS service get showcased for Concentrated Solar Power (CSP) plants in the region of Andalusia, Spain. The resulting spatial patterns of possible power plant sites are an important input to the procedural chain of assessing impacts of renewable energies in an integrated effort. The applied methodology and the implemented SDSS are applicable for other renewable technologies as well. - Highlights: • The proposed tool facilitates well-founded CSP plant siting decisions. • Spatial MCDA methods are implemented in a WebGIS environment. • GIS-based SDSS can contribute to a modern integrated impact assessment workflow. • The conducted case study proves the suitability of the methodology

Creating a spatial multi-criteria decision support system for energy related integrated environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Wanderer, Thomas, E-mail: thomas.wanderer@dlr.de; Herle, Stefan, E-mail: stefan.herle@rwth-aachen.de

2015-04-15

By their spatially very distributed nature, profitability and impacts of renewable energy resources are highly correlated with the geographic locations of power plant deployments. A web-based Spatial Decision Support System (SDSS) based on a Multi-Criteria Decision Analysis (MCDA) approach has been implemented for identifying preferable locations for solar power plants based on user preferences. The designated areas found serve for the input scenario development for a subsequent integrated Environmental Impact Assessment. The capabilities of the SDSS service get showcased for Concentrated Solar Power (CSP) plants in the region of Andalusia, Spain. The resulting spatial patterns of possible power plant sites are an important input to the procedural chain of assessing impacts of renewable energies in an integrated effort. The applied methodology and the implemented SDSS are applicable for other renewable technologies as well. - Highlights: • The proposed tool facilitates well-founded CSP plant siting decisions. • Spatial MCDA methods are implemented in a WebGIS environment. • GIS-based SDSS can contribute to a modern integrated impact assessment workflow. • The conducted case study proves the suitability of the methodology.

Integrative Application of Life Cycle Assessment and Risk Assessment to Environmental Impacts of Anthropogenic Pollutants at a Watershed Scale.

Science.gov (United States)

Lin, Xiaodan; Yu, Shen; Ma, Hwongwen

2018-01-01

Intense human activities have led to increasing deterioration of the watershed environment via pollutant discharge, which threatens human health and ecosystem function. To meet a need of comprehensive environmental impact/risk assessment for sustainable watershed development, a biogeochemical process-based life cycle assessment and risk assessment (RA) integration for pollutants aided by geographic information system is proposed in this study. The integration is to frame a conceptual protocol of "watershed life cycle assessment (WLCA) for pollutants". The proposed WLCA protocol consists of (1) geographic and environmental characterization mapping; (2) life cycle inventory analysis; (3) integration of life-cycle impact assessment (LCIA) with RA via characterization factor of pollutant of interest; and (4) result analysis and interpretation. The WLCA protocol can visualize results of LCIA and RA spatially for the pollutants of interest, which might be useful for decision or policy makers for mitigating impacts of watershed development.

Environmental impact assessment based on planning support system

NARCIS (Netherlands)

Carsjens, G.J.; Chen, W.

2011-01-01

How to assess environmental impact is one of the keys in land use planning. This article described in detail the concepts of activities, impact zones, functions, and sensitivities, as well as the development of STEPP (strategic tool for integrating environmental aspects in planning procedures) based

Effective integration of environmental leadership and environmental management systems within Cameco's Mining Division

International Nuclear Information System (INIS)

Nagy, K.; Borchardt, S.

2010-01-01

To support the implementation of its integrated Safety, Health, Environment & Quality (SHEQ) Policy, Cameco has undertaken an environmental leadership initiative with the goal of moving beyond regulatory compliance and significantly reducing environmental impacts in five key areas: air emissions, treated water quality and quantity, energy use and greenhouse gas emissions, and waste generation. To ensure environmental leadership becomes routine business practice, it was necessary to integrate the initiative into Cameco's programs and management systems at the corporate and operational levels. Operations-based environmental leadership strategies and action plans have since been developed, as well as a corporate reporting system to monitor Cameco's environmental performance. (author)

ENVIRONMENTAL AUDITING: AN INTEGRATED ENVIRONMENTAL ASSESSMENT OF THE U.S. MID-ATLANTIC REGION

Science.gov (United States)

Many of today's environmental problems are regional in scope and their effects overlap and interact. We developed a simple method to provide an integrated assessment of environmental conditions and estimate cumulative impacts across a large region, by combining data on land-cove...

Analysis of the environmental impact generated by nuclear activities

International Nuclear Information System (INIS)

Lazar, Roxana Elena; Dumitrescu, Maria

2000-01-01

Assessment of environmental impact represents one of the most formalized examples of interdisciplinary approach. After more then a century from the introduction of the concept of environmental impact assessment, this undertaking still represents an amalgamation of mini-studies based on pre-determined approaches rather than a genuine integrated document. This work presents the most important and adequate techniques of analysis of environmental impact generated by nuclear activities starting from identification of the events causing negative effects upon environment (by using checking list, the matrices and the cause-effect diagram) and radiation dose determination up to the decision making process. To preserve environment integrity the human factor should be re-evaluated as well as its active participation in formation and settling of an real environmental culture

Four conceptual issues to consider in integrating social and environmental factors in risk and impact assessments

Energy Technology Data Exchange (ETDEWEB)

Domínguez-Gómez, J. Andrés, E-mail: andres@uhu.es

2016-01-15

In the last twenty years, both the increase in academic production and the expansion of professional involvement in Environmental Impact Assessment (EIA) and Social Impact Assessment (SIA) have evidenced growing scientific and business interest in risk and impact analysis. However, this growth has not brought with it parallel progress in addressing the main shortcomings of EIA/SIA, i.e. insufficient integration of environmental and social factors into development project analyses and, in cases where the social aspects are considered, technical-methodological failings in their analysis and assessment. It is clear that these weaknesses carry with them substantial threats to the sustainability (social, environmental and economic) of projects which impact on the environment, and consequently to the local contexts where they are carried out and to the delicate balance of the global ecosystem. This paper argues that, in a sociological context of complexity and dynamism, four conceptual elements should underpin approaches to socio-environmental risk and impact assessment in development projects: a theoretical base in actor–network theory; an ethical grounding in values which are internationally recognized (though not always fulfilled in practice); a (new) epistemological-scientific base; and a methodological foundation in social participation. - Highlights: • A theoretical foundation in actor–network theory • An ethical grounding in values which are internationally recognized, but rarely carried through into practice • A (new) epistemological-scientific base • A methodological foundation in social participation.

Four conceptual issues to consider in integrating social and environmental factors in risk and impact assessments

International Nuclear Information System (INIS)

Domínguez-Gómez, J. Andrés

2016-01-01

In the last twenty years, both the increase in academic production and the expansion of professional involvement in Environmental Impact Assessment (EIA) and Social Impact Assessment (SIA) have evidenced growing scientific and business interest in risk and impact analysis. However, this growth has not brought with it parallel progress in addressing the main shortcomings of EIA/SIA, i.e. insufficient integration of environmental and social factors into development project analyses and, in cases where the social aspects are considered, technical-methodological failings in their analysis and assessment. It is clear that these weaknesses carry with them substantial threats to the sustainability (social, environmental and economic) of projects which impact on the environment, and consequently to the local contexts where they are carried out and to the delicate balance of the global ecosystem. This paper argues that, in a sociological context of complexity and dynamism, four conceptual elements should underpin approaches to socio-environmental risk and impact assessment in development projects: a theoretical base in actor–network theory; an ethical grounding in values which are internationally recognized (though not always fulfilled in practice); a (new) epistemological-scientific base; and a methodological foundation in social participation. - Highlights: • A theoretical foundation in actor–network theory • An ethical grounding in values which are internationally recognized, but rarely carried through into practice • A (new) epistemological-scientific base • A methodological foundation in social participation

The National Environmental Policy Act and DOE's programmatic environmental impact statement

International Nuclear Information System (INIS)

Wisenbaker, W.E.

1991-01-01

The National Environmental Policy Act (NEPA) of 1969 requires that all agencies of the federal government prepare a detailed statement on any action significantly affecting the quality of the human environment. Such a statement must include the environmental impact of the proposed action, any adverse environmental effects that cannot be avoided should the proposed action be implemented, and alternatives to the proposed action. In requiring environmental statements, NEPA encourages viewing related actions collectively and looking at cumulative impacts. A programmatic environmental impact statement (PEIS) is a broad environmental analysis of a program or policy prepared when actions are connected and may have cumulative environmental impacts. The PEIS benefits include providing input into an agency's planning and decision making, assessing potential environmental consequences of a wide range of alternatives before options have been foreclosed, and allowing consideration of systemwide impacts of various alternatives early in the decision-making process. The US Department of Energy (DOE) will prepare its PEIS on Environmental Restoration and Waste Management program. The PEIS will consider programmatic issues and integrated approaches to the program; address national, program-wide alternatives rather than site-specific actions; and provide for subsequent NEPA documents of narrower scope to be prepared to address site-specific or project-specific actions

Integrating human health into environmental impact assessment: case studies of Canada's Northern mining resource sector

International Nuclear Information System (INIS)

Noble, B.F.; Bronson, J.E.

2005-01-01

This paper examines the integration of human health considerations into environmental impact assessment (EIA) in the Canadian North. Emphasis is placed on the northern mining sector, where more land has been staked in the past decade than in the previous 50 years combined. Using information from interviews with northern EIA and health practitioners and reviews of selected project documents, we examined three principal mining case studies, northern Saskatchewan uranium mining operations, the Ekati diamond project, and the Voisey's Bay mine/mill project, to determine whether and how health considerations in EIA have evolved and the current nature and scope of health integration. Results suggest that despite the recognized link between environment and health and the number of high-profile megaprojects in Canada's North, human health, particularly social health, has not been given adequate treatment in northern EIA. Health considerations in EIA have typically been limited to physical health impacts triggered directly by project-induced environmental change, while social and other health determinants have been either not considered at all, or limited to those aspects of health and well-being that the project proponent directly controlled, namely employment opportunities and worker health and safety. In recent years, we have been seeing improvements in the scope of health in EIA to reflect a broader range of health determinants, including traditional land use and culture. However, there is still a need to adopt impact mitigation and enhancement measures that are sensitive to northern society, to monitor and follow up actual health impacts after project approval, and to ensure that mitigation and enhancement measures are effective. (author)

Energy efficiency through integrated environmental management.

Science.gov (United States)

Benromdhane, Souad Ahmed

2015-05-01

Integrated environmental management became an economic necessity after industrial development proved to be unsustainable without consideration of environmental direct and indirect impacts. Energy dependency and air pollution along with climate change grew into major challenges facing developed and developing countries alike. Thus, a new global market structure emerged and changed the way we do trade. The search intensified for alternatives to petroleum. However, scientists, policy makers, and environmental activists agreed to focus on strategic conservation and optimization of energy use. Environmental concerns will remain partially unaddressed with the current pace of consumption because greenhouse gas emissions will continue to rise with economic growth. This paper discusses energy efficiency, steady integration of alternative sources, and increased use of best available technologies. Energy criteria developed for environmental labeling certification are presented. Our intention is to encourage manufacturers and service providers to supply consumers with less polluting and energy-consuming goods and services, inform consumers of the environmental and energy impacts, and thereby instill sustainable and responsible consumption. As several programs were initiated in developed countries, environmental labeling requirements created barriers to many exports manufactured in developing countries, affecting current world trade and putting more pressure on countries to meet those requirements. Defining an institutional and legal framework of environmental labeling is a key challenge in implementing such programs for critical economic sectors like tourism, textiles, and food production where energy needs are the most important aspect to control. A case study of Tunisia and its experience with eco-labeling is presented.

Life Cycle Assessment, ExternE and Comprehensive Analysis for an integrated evaluation of the environmental impact of anthropogenic activities

Energy Technology Data Exchange (ETDEWEB)

Pietrapertosa, F.; Cosmi, C. [National Research Council, Institute of Methodologies for Environmental Analysis C.N.R.-I.M.A.A. C.da S.Loja, I-85050 Tito Scalo (PZ) (Italy); National Research Council, National Institute for the Physics of Matter, C.N.R.-I.N.F.M. Via Cinthia, I-80126 Naples (Italy); Macchiato, M. [Federico II University, Department of Physical Sciences, Via Cinthia, I-80126 Naples (Italy); National Research Council, National Institute for the Physics of Matter, C.N.R.-I.N.F.M. Via Cinthia, I-80126 Naples (Italy); Salvia, M.; Cuomo, V. [National Research Council, Institute of Methodologies for Environmental Analysis C.N.R.-I.M.A.A. C.da S.Loja, I-85050 Tito Scalo (PZ) (Italy)

2009-06-15

The implementation of resource management strategies aimed at reducing the impacts of the anthropogenic activities system requires a comprehensive approach to evaluate on the whole the environmental burdens of productive processes and to identify the best recovery strategies from both an environmental and an economic point of view. In this framework, an analytical methodology based on the integration of Life Cycle Assessment (LCA), ExternE and Comprehensive Analysis was developed to perform an in-depth investigation of energy systems. The LCA methodology, largely utilised by the international scientific community for the assessment of the environmental performances of technologies, combined with Comprehensive Analysis allows modelling the overall system of anthropogenic activities, as well as sub-systems, the economic consequences of the whole set of environmental damages. Moreover, internalising external costs into partial equilibrium models, as those utilised by Comprehensive Analysis, can be useful to identify the best paths for implementing technology innovation and strategies aimed to a more sustainable energy supply and use. This paper presents an integrated application of these three methodologies to a local scale case study (the Val D'Agri area in Basilicata, Southern Italy), aimed to better characterise the environmental impacts of the energy system, with particular reference to extraction activities. The innovative methodological approach utilised takes advantage from the strength points of each methodology with an added value coming from their integration as emphasised by the main results obtained by the scenario analysis. (author)

An Integrated Environmental Assessment of the US Mid-Atlantic Region

Science.gov (United States)

James D. Wickham; K.B. Jones; Kurt H. Riitters; R.V. O' Neill; R.D. Tankersley; E.R. Smith; A.C. Neale; D.J. Chaloud

1999-01-01

Many of today's environmental problems are in scope and their effects overlap and interact. We developed a simple method to provide an integrated assessment of environmental conditions and estimate cumulative impacts across a large region, by combining data on land-cover, population, roads, streams, air pollution, and topography. The integrated assessment...

78 FR 13082 - Draft Environmental Impact Report/Environmental Impact Statement/Environmental Impact Statement...

Science.gov (United States)

2013-02-26

...The Bureau of Reclamation has made available for public review and comment the draft Environmental Impact Report/Environmental Impact Statement/Environmental Impact Statement (EIR/EIS/EIS) for the Upper Truckee River Restoration and Marsh Restoration Project (Project). The California Tahoe Conservancy and the Tahoe Regional Planning Agency, the other lead agencies for the Project, made the EIR/EIS/EIS available to the public on February 8, 2013.

Decision-making and environmental impacts

OpenAIRE

Elmquist, Helena; Lindgren, Urban; Mäkilä, Kalle

2004-01-01

This report describes an interdisciplinary study combining social sciences and natural sciences in an integrated simulation model. The integrated dynamic simulation model consists of the interplay between the decision-making farmer, the physical flows at the farm and the structural conditions that influence the business. The central question studied here concerned the energy use, environmental impacts and business economics of various decision models in comparison to different levels of envir...

Envirotyping for deciphering environmental impacts on crop plants.

Science.gov (United States)

Xu, Yunbi

2016-04-01

Global climate change imposes increasing impacts on our environments and crop production. To decipher environmental impacts on crop plants, the concept "envirotyping" is proposed, as a third "typing" technology, complementing with genotyping and phenotyping. Environmental factors can be collected through multiple environmental trials, geographic and soil information systems, measurement of soil and canopy properties, and evaluation of companion organisms. Envirotyping contributes to crop modeling and phenotype prediction through its functional components, including genotype-by-environment interaction (GEI), genes responsive to environmental signals, biotic and abiotic stresses, and integrative phenotyping. Envirotyping, driven by information and support systems, has a wide range of applications, including environmental characterization, GEI analysis, phenotype prediction, near-iso-environment construction, agronomic genomics, precision agriculture and breeding, and development of a four-dimensional profile of crop science involving genotype (G), phenotype (P), envirotype (E) and time (T) (developmental stage). In the future, envirotyping needs to zoom into specific experimental plots and individual plants, along with the development of high-throughput and precision envirotyping platforms, to integrate genotypic, phenotypic and envirotypic information for establishing a high-efficient precision breeding and sustainable crop production system based on deciphered environmental impacts.

Geomorphological hazards and environmental impact: Assessment and mapping

Science.gov (United States)

Panizza, Mario

In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

Science.gov (United States)

Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

2018-06-13

The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

Effective integration of environmental leadership and environmental management systems within Cameco's Mining Division

Energy Technology Data Exchange (ETDEWEB)

Nagy, K.; Borchardt, S., E-mail: kevin_nagy@cameco.com [Cameco Corp., Saskatoon, SK (Canada)

2010-07-01

To support the implementation of its integrated Safety, Health, Environment & Quality (SHEQ) Policy, Cameco has undertaken an environmental leadership initiative with the goal of moving beyond regulatory compliance and significantly reducing environmental impacts in five key areas: air emissions, treated water quality and quantity, energy use and greenhouse gas emissions, and waste generation. To ensure environmental leadership becomes routine business practice, it was necessary to integrate the initiative into Cameco's programs and management systems at the corporate and operational levels. Operations-based environmental leadership strategies and action plans have since been developed, as well as a corporate reporting system to monitor Cameco's environmental performance. (author)

INTEGRATION OF ENVIRONMENTAL MANAGEMENT SYSTEM

Directory of Open Access Journals (Sweden)

Tomescu Ada Mirela

2012-07-01

Full Text Available The relevance of management as significant factor of business activity can be established on various management systems. These will help to obtain, organise, administrate, evaluate and control particulars: information, quality, environmental protection, health and safety, various resources (time, human, finance, inventory etc. The complexity of nowadays days development, forced us to think ‘integrated’. Sustainable development principles require that environment management policies and practices are not good in themselves but also integrate with all other environmental objectives, and with social and economic development objectives. The principles of sustainable development involve that environment management policies and practices. These are not sound in them-self but also integrate with all other environmental objectives, and with social and economic development objectives. Those objectives were realized, and followed by development of strategies to effects the objective of sustainable development. Environmental management should embrace recent change in the area of environmental protection, and suit the recently regulations of the field -entire legal and economic, as well as perform management systems to meet the requirements of the contemporary model for economic development. These changes are trailed by abandon the conventional approach of environmental protection and it is replaced by sustainable development (SD. The keys and the aims of Cleaner Productions (CP are presented being implemented in various companies as a non-formalised environmental management system (EMS. This concept is suggested here as a proper model for practice where possible environmental harmful technologies are used -e.g. Rosia Montana. Showing the features and the power of CP this paper is a signal oriented to involve the awareness of policy-makers and top management of diverse Romanian companies. Many companies in European countries are developing

Environmental control integrated system for abnormal conditions of CNAAA-Angra-1 operation

International Nuclear Information System (INIS)

Kircher, E.; Silva, R.A. da.

1986-01-01

A system of computer codes named NUCSICA (Calculation Nucleus of Environmental Control Integrated System) to be used in the Environmental Control Integrated System (SICA) and integrated to the supervision system of Safety Parameters (SSPS), is described. The system is based on a model compatible with local characteristics of Angra-I reactor, relating to micrometeorology, topography, population distribution and socio-economic activities. The model was constructed to foresee the environmental impact. (M.C.K.) [pt

Integrated environmental zoning - An innovative Dutch approach to measuring and managing environmental spillovers in urban regions

NARCIS (Netherlands)

Miller, D.; de Roo, G.

1996-01-01

The Dutch development of Integrated Environmental Zoning is an advanced effort to account cumulatively for several environmental spillovers from manufacturing, and to manage their impacts on surrounding residential areas. This national policy initiative involves mapping the spatial patterns of

Salt Lake City Area Integrated Projects: Rate adjustment: Environmental assessment

International Nuclear Information System (INIS)

1990-08-01

The Department of Energy (DOE) has determined that the proposed firm power rate increase for the Salt Lake City Area Integrated Projects (Integrated Projects) power would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA, 42 USC 4321, et seq.) and, as such, does not require the preparation of an environmental impact statement (EIS). This determination is based on an environmental assessment (EA) prepared by the Western Area Power Administration (Western) dated August 1990 (DOE/EA-0457). The EA identifies and evaluates the potential environmental and socioeconomic effects of the proposed action, and based on the analysis contained therein, DOE concludes that the impacts to the human environment resulting from the implementation of the rate increase would be insignificant

Optimizing decentralized renewable energy production by combining potentials and integrated environmental impact analysis. A case study in the Hannover region

Energy Technology Data Exchange (ETDEWEB)

Palmas, Claudia; Siewert, Almut [Leibniz Univ. of Hannover (Germany). Dept. of Environmental Planning

2013-07-01

In Europe, the integration of decentralized renewable energy production in regional planning processes plays a crucial role. In particular, regions face a major challenge in order to set up renewable decentralized energy systems and incorporate them into the electricity grid. This paper presents a methodological concept and preliminary tests of applications in order to create an optimization model for an improved renewable energy development and planning practice: firstly, the energy potentials of micro renewable resources are estimated, and secondly the outcomes are combined with an estimation of resulting environmental impacts. Including these data into the spatial analysis, different scenarios can be developed in order to support decision making in landscape planning on the basis of environmental and landscape criteria as well as energy issues, including technical aspects and costs. The case study area is the Hannover region. First results show good energy potentials, which will be in a next step evaluated and combined with environmental impacts in order to improve energy efficiency by integrated renewable, decentralized power plants and energy mix. (orig.)

Integrated farm sustainability assessment for the environmental management of rural activities

International Nuclear Information System (INIS)

Stachetii Rodrigues, Geraldo; Aparecida Rodrigues, Izilda; Almeida Buschinelli, Claudio Cesar de; Barros, Inacio de

2010-01-01

Farmers have been increasingly called upon to respond to an ongoing redefinition in consumers' demands, having as a converging theme the search for sustainable production practices. In order to satisfy this objective, instruments for the environmental management of agricultural activities have been sought out. Environmental impact assessment methods are appropriate tools to address the choice of technologies and management practices to minimize negative effects of agricultural development, while maximizing productive efficiency, sound usage of natural resources, conservation of ecological assets and equitable access to wealth generation means. The 'system for weighted environmental impact assessment of rural activities' (APOIA-NovoRural) presented in this paper is organized to provide integrated farm sustainability assessment according to quantitative environmental standards and defined socio-economic benchmarks. The system integrates sixty-two objective indicators in five sustainability dimensions - (i) Landscape ecology, (ii) Environmental quality (atmosphere, water and soil), (iii) Sociocultural values, (iv) Economic values, and (v) Management and administration. Impact indices are expressed in three integration levels: (i) specific indicators, that offer a diagnostic and managerial tool for farmers and rural administrators, by pointing out particular attributes of the rural activities that may be failing to comply with defined environmental performance objectives; (ii) integrated sustainability dimensions, that show decision-makers the major contributions of the rural activities toward local sustainable development, facilitating the definition of control actions and promotion measures; and (iii) aggregated sustainability index, that can be considered a yardstick for eco-certification purposes. Nine fully documented case studies carried out with the APOIA-NovoRural system, focusing on different scales, diverse rural activities/farming systems, and contrasting

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution.

Science.gov (United States)

Zhou, Xiaoying; Schoenung, Julie M

2007-04-01

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.

Integrated environmental and economic assessment of waste management systems

DEFF Research Database (Denmark)

Martinez Sanchez, Veronica

in the “Optimization approach” the scenarios are the results of an optimization process. • The cost approach describes cost principles and level of LCA integration. Conventional and Environmental LCCs are financial assessments, i.e. include marketed goods/services, but while Environmental LCCs include environmental...... assessment of SWM systems alongside environmental impacts assessment to take budget constrains into account. In light of the need for combined environmental and economic assessment of SWM, this PhD thesis developed a consistent and comprehensive method for integrated environmental and economic assessment...... of SWM technologies and systems. The method resulted from developing further the generic Life Cycle Costing (LCC) framework suggested by Hunkeler et al. (2008) and Swarr et al. (2011) to apply it on the field of SWM. The method developed includes: two modelling approaches (Accounting and Optimization...

Environmental Impact Optimization of Reinforced Concrete Slab Frame Bridges

DEFF Research Database (Denmark)

Yavari, Majid Solat; Du, Guangli; Pacoste, Costin

2017-01-01

The main objective of this research is to integrate environmental impact optimization in the structural design of reinforced concrete slab frame bridges in order to determine the most environmental-friendly design. The case study bridge used in this work was also investigated in a previous paper...... focusing on the optimization of the investment cost, while the present study focuses on environmental impact optimization and comparing the results of both of these studies. Optimization technique based on the pattern search method was implemented. Moreover, a comprehensive Life Cycle Assessment (LCA......) methodology of ReCiPe and two monetary weighting systems were used to convert environmental impacts into monetary costs. The analysis showed that both monetary weighting systems led to the same results. Furthermore, optimization based on environmental impact generated models with thinner construction elements...

GIS based procedure of cumulative environmental impact assessment.

Science.gov (United States)

Balakrishna Reddy, M; Blah, Baiantimon

2009-07-01

Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

Managing the environmental impacts of land transport: integrating environmental analysis with urban planning

International Nuclear Information System (INIS)

Irving, Paul; Moncrieff, Ian

2004-01-01

Ecological systems have limits or thresholds that vary by pollutant type, emissions sources and the sensitivity of a given location. Human health can also indicate sensitivity. Good environmental management requires any problem to be defined to obtain efficient and effective solutions. Cities are where transport activities, effects and resource management decisions are often most focussed. The New Zealand Ministry of Transport has developed two environmental management tools. The Vehicle Fleet Model (VFM) is a predictive database of the environmental performance of the New Zealand traffic fleet (and rail fleet). It calculates indices of local air quality, stormwater, and greenhouse gases emissions. The second is an analytical process based on Environmental Capacity Analysis (ECA). Information on local traffic is combined with environmental performance data from the Vehicle Fleet Model. This can be integrated within a live, geo-spatially defined analysis of the overall environmental effects within a defined local area. Variations in urban form and activity (traffic and other) that contribute to environmental effects can be tracked. This enables analysis of a range of mitigation strategies that may contribute, now or in the future, to maintaining environmental thresholds or meeting targets. A case study of the application of this approach was conducted within Waitakere City. The focus was on improving the understanding of the relative significance of stormwater contaminants derived from land transport

NEIMiner: nanomaterial environmental impact data miner.

Science.gov (United States)

Tang, Kaizhi; Liu, Xiong; Harper, Stacey L; Steevens, Jeffery A; Xu, Roger

2013-01-01

As more engineered nanomaterials (eNM) are developed for a wide range of applications, it is crucial to minimize any unintended environmental impacts resulting from the application of eNM. To realize this vision, industry and policymakers must base risk management decisions on sound scientific information about the environmental fate of eNM, their availability to receptor organisms (eg, uptake), and any resultant biological effects (eg, toxicity). To address this critical need, we developed a model-driven, data mining system called NEIMiner, to study nanomaterial environmental impact (NEI). NEIMiner consists of four components: NEI modeling framework, data integration, data management and access, and model building. The NEI modeling framework defines the scope of NEI modeling and the strategy of integrating NEI models to form a layered, comprehensive predictability. The data integration layer brings together heterogeneous data sources related to NEI via automatic web services and web scraping technologies. The data management and access layer reuses and extends a popular content management system (CMS), Drupal, and consists of modules that model the complex data structure for NEI-related bibliography and characterization data. The model building layer provides an advanced analysis capability for NEI data. Together, these components provide significant value to the process of aggregating and analyzing large-scale distributed NEI data. A prototype of the NEIMiner system is available at http://neiminer.i-a-i.com/.

Integrating rather than juxtaposing environmental policy and the internal market

NARCIS (Netherlands)

Vedder, Hans; Koutrakos, Panos; Snell, Jukka

2017-01-01

This contribution to the research handbook on the internal market describes and analyses the case law on environmental measures that impact the internal market and notably the free movement of goods. It argues that an integration may be better for both environmental protection and market

Environmental impact assessment of conventional and organic milk production

NARCIS (Netherlands)

Boer, de I.J.M.

2003-01-01

Organic agriculture addresses the public demand to diminish environmental pollution of agricultural production. Until now, however, only few studies tried to determine the integrated environmental impact of conventional versus organic production using life cycle assessment (LCA). The aim of this

MANAGEMENT OF SOLID WASTE GENERATED BY THE INTEGRATED STEELWORKS ACTIVITY AND SOLUTIONS TO REDUCE THE ENVIRONMENTAL IMPACT

Directory of Open Access Journals (Sweden)

Anişoara CIOCAN

2010-05-01

Full Text Available The development of steel industry is subject to solve major problems arising from industry-nature relationship, strictly targeted on pollution control and protection of natural resources and energy. In this paper we discussed about the management of solid waste generated by an integrated steelwork located near a major urban area and the adopted solutions for the reduction of environmental impact. There are summarized technical solutions that are currently applied and were proposed some solutions that can be applied in accordance with the environmental legislations. The new solutions are proposed for integrated management of solid wastes in accordance with: the exact quantification (quantitative, qualitative and the generation sources of emissions and solid wastes; controlled storage; minimization of the wastes and its harmfulness; transformation of the wastes into valuable by-products used directly by the company in a subsequent process, or by external down-stream user.

A holistic passive integrative sampling approach for assessing the presence and potential impacts of waterborne environmental contaminants

Science.gov (United States)

Petty, J.D.; Huckins, J.N.; Alvarez, D.A.; Brumbaugh, W. G.; Cranor, W.L.; Gale, R.W.; Rastall, A.C.; Jones-Lepp, T. L.; Leiker, T.J.; Rostad, C. E.; Furlong, E.T.

2004-01-01

As an integral part of our continuing research in environmental quality assessment approaches, we have developed a variety of passive integrative sampling devices widely applicable for use in defining the presence and potential impacts of a broad array of contaminants. The semipermeable membrane device has gained widespread use for sampling hydrophobic chemicals from water and air, the polar organic chemical integrative sampler is applicable for sequestering waterborne hydrophilic organic chemicals, the stabilized liquid membrane device is used to integratively sample waterborne ionic metals, and the passive integrative mercury sampler is applicable for sampling vapor phase or dissolved neutral mercury species. This suite of integrative samplers forms the basis for a new passive sampling approach for assessing the presence and potential toxicological significance of a broad spectrum of environmental contaminants. In a proof-of-concept study, three of our four passive integrative samplers were used to assess the presence of a wide variety of contaminants in the waters of a constructed wetland, and to determine the effectiveness of the constructed wetland in removing contaminants. The wetland is used for final polishing of secondary-treatment municipal wastewater and the effluent is used as a source of water for a state wildlife area. Numerous contaminants, including organochlorine pesticides, polycyclic aromatic hydrocarbons, organophosphate pesticides, and pharmaceutical chemicals (e.g., ibuprofen, oxindole, etc.) were detected in the wastewater. Herein we summarize the results of the analysis of the field-deployed samplers and demonstrate the utility of this holistic approach.

Ecological risk assessment as a framework for environmental impact assessments

CSIR Research Space (South Africa)

Claassen, Marius

1999-01-01

Full Text Available Environmental impact assessments in South Africa are usually conducted according to the integrated environmental management (IEM) procedure. The preliminary investigation reported here, indicated that most of the ecological requirements specified...

Is Environmental Impact Assessment fulfilling its potential?

DEFF Research Database (Denmark)

Larsen, Sanne Vammen

2014-01-01

fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

Integrating Green Purchasing Into Your Environmental Management System (EMS)

Science.gov (United States)

The goal of this report is to help Federal facilities integrate green purchasing into their EMS. The intended audience includes those tasked with implementing an EMS, reducing environmental impacts, meeting green purchasing requirements.

Assessing the Environmental Performance of Integrated Ethanol and Biogas Production

Energy Technology Data Exchange (ETDEWEB)

Martin, Michael; Svensson, Niclas; Fonseca, Jorge (Linkoeping Univ., Environmental Technology and Management, Linkoeping (Sweden)), e-mail: michael.martin@liu.se

2011-06-15

As the production of biofuels continues to expand worldwide, criticism about, e.g. the energy output versus input and the competition with food has been questioned. However, biofuels may be optimized to increase the environmental performance through the concepts of industrial symbiosis. This paper offers a quantification of the environmental performance of industrial symbiosis in the biofuel industry through integration of biogas and ethanol processes using a life cycle approach. Results show that although increasing integration is assumed to produce environmental benefits in industrial symbiosis, not all impact categories have achieved this and the results depend upon the allocation methods chosen

Tools for integrating environmental objectives into policy and practice: What works where?

Energy Technology Data Exchange (ETDEWEB)

Runhaar, Hens

2016-07-15

An abundance of approaches, strategies, and instruments – in short: tools – have been developed that intend to stimulate or facilitate the integration of a variety of environmental objectives into development planning, national or regional sectoral policies, international agreements, business strategies, etc. These tools include legally mandatory procedures, such as Environmental Impact Assessment and Strategic Environmental Assessment; more voluntary tools such as environmental indicators developed by scientists and planning tools; green budgeting, etc. A relatively underexplored question is what integration tool fits what particular purposes and contexts, in short: “what works where?”. This paper intends to contribute to answering this question, by first providing conceptual clarity about what integration entails, by suggesting and illustrating a classification of integration tools, and finally by summarising some of the lessons learned about how and why integration tools are (not) used and with what outcomes, particularly in terms of promoting the integration of environmental objectives.

Tools for integrating environmental objectives into policy and practice: What works where?

International Nuclear Information System (INIS)

Runhaar, Hens

2016-01-01

An abundance of approaches, strategies, and instruments – in short: tools – have been developed that intend to stimulate or facilitate the integration of a variety of environmental objectives into development planning, national or regional sectoral policies, international agreements, business strategies, etc. These tools include legally mandatory procedures, such as Environmental Impact Assessment and Strategic Environmental Assessment; more voluntary tools such as environmental indicators developed by scientists and planning tools; green budgeting, etc. A relatively underexplored question is what integration tool fits what particular purposes and contexts, in short: “what works where?”. This paper intends to contribute to answering this question, by first providing conceptual clarity about what integration entails, by suggesting and illustrating a classification of integration tools, and finally by summarising some of the lessons learned about how and why integration tools are (not) used and with what outcomes, particularly in terms of promoting the integration of environmental objectives.

Integrating information for better environmental decisions.

Energy Technology Data Exchange (ETDEWEB)

MacDonell, M.; Morgan, K.; Newland, L.; Environmental Assessment; Texas Christian Univ.

2002-01-01

As more is learned about the complex nature and extent of environmental impacts from progressive human disturbance, scientists, policy analysts, decision makers, educators, and communicators are increasingly joining forces to develop strategies for preserving and protecting the environment. The Eco-Informa Foundation is an educational scientific organization dedicated to promoting the collaborative development and sharing of scientific information. The Foundation participated in a recent international conference on environmental informatics through a special symposium on integrating information for better environmental decisions. Presentations focused on four general themes: (1) remote sensing and data interpretation, including through new knowledge management tools; (2) risk assessment and communication, including for radioactively contaminated facilities, introduced biological hazards, and food safety; (3) community involvement in cleanup projects; and (4) environmental education. The general context for related issues, methods and applications, and results and recommendations from those discussions are highlighted here.

Integrated environmental decision support tool based on GIS technology

International Nuclear Information System (INIS)

Doctor, P.G.; O'Neil, T.K.; Sackschewsky, M.R.; Becker, J.M.; Rykiel, E.J.; Walters, T.B.; Brandt, C.A.; Hall, J.A.

1995-01-01

Environmental restoration and management decisions facing the US Department of Energy require balancing trade-offs between diverse land uses and impacts over multiple spatial and temporal scales. Many types of environmental data have been collected for the Hanford Site and the Columbia River in Washington State over the past fifty years. Pacific Northwest National Laboratory (PNNL) is integrating these data into a Geographic Information System (GIS) based computer decision support tool. This tool provides a comprehensive and concise description of the current environmental landscape that can be used to evaluate the ecological and monetary trade-offs between future land use, restoration and remediation options before action is taken. Ecological impacts evaluated include effects to individual species of concern and habitat loss and fragmentation. Monetary impacts include those associated with habitat mitigation. The tool is organized as both a browsing tool for educational purposes, and as a framework that leads a project manager through the steps needed to be in compliance with environmental requirements

Integrated Decision Support for Global Environmental Change Adaptation

Science.gov (United States)

Kumar, S.; Cantrell, S.; Higgins, G. J.; Marshall, J.; VanWijngaarden, F.

2011-12-01

Environmental changes are happening now that has caused concern in many parts of the world; particularly vulnerable are the countries and communities with limited resources and with natural environments that are more susceptible to climate change impacts. Global leaders are concerned about the observed phenomena and events such as Amazon deforestation, shifting monsoon patterns affecting agriculture in the mountain slopes of Peru, floods in Pakistan, water shortages in Middle East, droughts impacting water supplies and wildlife migration in Africa, and sea level rise impacts on low lying coastal communities in Bangladesh. These environmental changes are likely to get exacerbated as the temperatures rise, the weather and climate patterns change, and sea level rise continues. Large populations and billions of dollars of infrastructure could be affected. At Northrop Grumman, we have developed an integrated decision support framework for providing necessary information to stakeholders and planners to adapt to the impacts of climate variability and change at the regional and local levels. This integrated approach takes into account assimilation and exploitation of large and disparate weather and climate data sets, regional downscaling (dynamic and statistical), uncertainty quantification and reduction, and a synthesis of scientific data with demographic and economic data to generate actionable information for the stakeholders and decision makers. Utilizing a flexible service oriented architecture and state-of-the-art visualization techniques, this information can be delivered via tailored GIS portals to meet diverse set of user needs and expectations. This integrated approach can be applied to regional and local risk assessments, predictions and decadal projections, and proactive adaptation planning for vulnerable communities. In this paper we will describe this comprehensive decision support approach with selected applications and case studies to illustrate how this

Environmental impacts of producing bioethanol and biobased lactic acid from standalone and integrated biorefineries using a consequential and an attributional life cycle assessment approach.

Science.gov (United States)

Parajuli, Ranjan; Knudsen, Marie Trydeman; Birkved, Morten; Djomo, Sylvestre Njakou; Corona, Andrea; Dalgaard, Tommy

2017-11-15

This study evaluates the environmental impacts of biorefinery products using consequential (CLCA) and attributional (ALCA) life cycle assessment (LCA) approaches. Within ALCA, economic allocation method was used to distribute impacts among the main products and the coproducts, whereas within the CLCA system expansion was adopted to avoid allocation. The study seeks to answer the questions (i) what is the environmental impacts of process integration?, and (ii) do CLCA and ALCA lead to different conclusions when applied to biorefinery?. Three biorefinery systems were evaluated and compared: a standalone system producing bioethanol from winter wheat-straw (system A), a standalone system producing biobased lactic acid from alfalfa (system B), and an integrated biorefinery system (system C) combining the two standalone systems and producing both bioethanol and lactic acid. The synergy of the integration was the exchange of useful energy necessary for biomass processing in the two standalone systems. The systems were compared against a common reference flow: "1MJ EtOH +1kg LA ", which was set on the basis of products delivered by the system C. Function of the reference flow was to provide service of both fuel (bioethanol) at 99.9% concentration (wt. basis) and biochemical (biobased lactic acid) in food industries at 90% purity; both products delivered at biorefinery gate. The environmental impacts of interest were global warming potential (GWP 100 ), eutrophication potential (EP), non-renewable energy (NRE) use and the agricultural land occupation (ALO). Regardless of the LCA approach adopted, system C performed better in most of the impact categories than both standalone systems. The process wise contribution to the obtained environmental impacts also showed similar impact pattern in both approaches. The study also highlighted that the recirculation of intermediate materials, e.g. C 5 sugar to boost bioethanol yield and that the use of residual streams in the energy

The economic, environmental and public health impacts of new power plants: a sequential inter industry model integrated with GIS data

Energy Technology Data Exchange (ETDEWEB)

Avelino, Andre F.T.; Hewings, Geoffrey J.D.; Guilhoto, Joaquim J.M. [Universidade de Sao Paulo (FEA/USP), SE (Brazil). Fac. de Administracao e Contabilidade

2010-07-01

The electrical sector is responsible for a considerable amount of greenhouse gases emissions worldwide, but also the one in which modern society depends the most for maintenance of quality of life as well as the functioning of economic and social activities. Invariably, even CO2 emission-free power plants have some indirect environmental impacts due to the economic effects they produce during their life cycle (construction, O and M and decommissioning). Thus, sustainability issues should be always considered in energy planning, by evaluating the balance of positive/negative externalities on different areas of the country. This study aims to introduce a social-environmental economic model, based on a Regional Sequential Inter industry Model (SIM) integrated with geoprocessing data, in order to identify economic, pollution and public health impacts in state level for energy planning analysis. The model is based on the Impact Pathway Approach Methodology, using geoprocessing to locate social-environmental variables for dispersion and health evaluations. The final goal is to provide an auxiliary tool for policy makers to assess energy planning scenarios in Brazil. (author)

Integrating environmental impact assessment into new product development and processing-technology selection

NARCIS (Netherlands)

Depping, Verena; Grunow, Martin; Middelaar, van Corina; Dumpler, Joseph

2017-01-01

Environmental-impact reduction potential is great early in new product development. To exploit this potential, this study evaluates novel combinations of existent processing technologies. Process engineering is combined with an environmental product assessment along the supply chain. In the dairy

A multi-scale metrics approach to forest fragmentation for Strategic Environmental Impact Assessment

Energy Technology Data Exchange (ETDEWEB)

Kim, Eunyoung, E-mail: eykim@kei.re.kr [Korea Environment Institute, 215 Jinheungno, Eunpyeong-gu, Seoul 122-706 (Korea, Republic of); Song, Wonkyong, E-mail: wksong79@gmail.com [Suwon Research Institute, 145 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 443-270 (Korea, Republic of); Lee, Dongkun, E-mail: dklee7@snu.ac.kr [Department of Landscape Architecture and Rural System Engineering, Seoul National University, 599 Gwanakro, Gwanak-gu, Seoul 151-921 (Korea, Republic of); Research Institute for Agriculture and Life Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of)

2013-09-15

Forests are becoming severely fragmented as a result of land development. South Korea has responded to changing community concerns about environmental issues. The nation has developed and is extending a broad range of tools for use in environmental management. Although legally mandated environmental compliance requirements in South Korea have been implemented to predict and evaluate the impacts of land-development projects, these legal instruments are often insufficient to assess the subsequent impact of development on the surrounding forests. It is especially difficult to examine impacts on multiple (e.g., regional and local) scales in detail. Forest configuration and size, including forest fragmentation by land development, are considered on a regional scale. Moreover, forest structure and composition, including biodiversity, are considered on a local scale in the Environmental Impact Assessment process. Recently, the government amended the Environmental Impact Assessment Act, including the SEA, EIA, and small-scale EIA, to require an integrated approach. Therefore, the purpose of this study was to establish an impact assessment system that minimizes the impacts of land development using an approach that is integrated across multiple scales. This study focused on forest fragmentation due to residential development and road construction sites in selected Congestion Restraint Zones (CRZs) in the Greater Seoul Area of South Korea. Based on a review of multiple-scale impacts, this paper integrates models that assess the impacts of land development on forest ecosystems. The applicability of the integrated model for assessing impacts on forest ecosystems through the SEIA process is considered. On a regional scale, it is possible to evaluate the location and size of a land-development project by considering aspects of forest fragmentation, such as the stability of the forest structure and the degree of fragmentation. On a local scale, land-development projects should

Assessing the environmental sustainability of ethanol from integrated biorefineries.

Science.gov (United States)

Falano, Temitope; Jeswani, Harish K; Azapagic, Adisa

2014-06-01

This paper considers the life cycle environmental sustainability of ethanol produced in integrated biorefineries together with chemicals and energy. Four types of second-generation feedstocks are considered: wheat straw, forest residue, poplar, and miscanthus. Seven out of 11 environmental impacts from ethanol are negative, including greenhouse gas (GHG) emissions, when the system is credited for the co-products, indicating environmental savings. Ethanol from poplar is the best and straw the worst option for most impacts. Land use change from forest to miscanthus increases the GHG emissions several-fold. For poplar, the effect is opposite: converting grassland to forest reduces the emissions by three-fold. Compared to fossil and first-generation ethanol, ethanol from integrated biorefineries is more sustainable for most impacts, with the exception of wheat straw. Pure ethanol saves up to 87% of GHG emissions compared to petrol per MJ of fuel. However, for the current 5% ethanol-petrol blends, the savings are much smaller (biorefineries to the reduction of GHG emissions will be insignificant. Yet, higher ethanol blends would lead to an increase in some impacts, notably terrestrial and freshwater toxicity as well as eutrophication for some feedstocks. © 2014 The Authors. Biotechnology Journal published by Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

Science.gov (United States)

Cho, N.; Lee, M. J.; Maeng, J. H.

2017-12-01

Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

Stuart oil shale project stage two: executive summary: draft environmental impact statement

International Nuclear Information System (INIS)

1999-09-01

The project is an oil shale open pit mine and processing operation that is currently being commissioned 15 km north of Gladstone, Queensland, Australia, and is owned as a joint venture by Southern Pacific Petroleum N.L., Central Pacific Minerals N.L, and Suncor Energy Inc., a leading Canadian company that is an integrated energy company. The results of a comprehensive investigation are included of the potential environmental impacts of the project, and which are described in the Draft Environmental Impact Statement (EIS). In stage two, there is included the existing mine expansion as well as the construction of an additional process plant based around a larger commercial scale ATP oil shale processing plant. The new stage two operation will be developed next to and integral with services and infrastructure provided for stage one. Described are: the assessment process, regulatory framework and the project area, the needs for an alternative to the project, the proposal itself, the existing natural, social and economic impacts, and the environmental impacts as well as plans for their mitigation. In appendices there are included a draft environmental management overview strategy and an environmental management plan. The elements covered in the report by section are: background, need for the project, the proponent, legislation and approvals, project description, environmental issues and impact management

Salt Lake City Area Integrated Projects electric power marketing -- Final environmental impact statement. Volume 1: Summary

International Nuclear Information System (INIS)

1996-01-01

The Colorado River Storage Project Customer Service Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Colorado, Green, Gunnison, and Rio Grande rivers and on Plateau Creek in Arizona, Colorado, Utah, Wyoming, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams) are influenced by Western power scheduling and transmission decisions. The environmental impact statement (EIS) alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Western's firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this EIS include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources. Western has identified commitment-level alternative 1, the Post-1989 commitment level, as its preferred alternative. The impact evaluations indicate that this commitment level is also the environmentally preferred alternative

10 CFR 51.29 - Scoping-environmental impact statement and supplement to environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Scoping-environmental impact statement and supplement to environmental impact statement. 51.29 Section 51.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... Environmental Policy Act-Regulations Implementing Section 102(2) Scoping § 51.29 Scoping-environmental impact...

New prospects in EU environmental policies. The Integrated Product Policy (IPP)

International Nuclear Information System (INIS)

Carnimeo, G.; Iraldo, F.

2000-01-01

The Integrated Product Policy - IPP - is becoming one of the top priorities for the European Commission within the framework of the product-oriented environmental policies. Rather than a new policy, this is an innovative approach aimed at co-originated existing and forthcoming environmental policies, in order to manage in an integrated way and minimise the impacts connected with the whole product life-cycle. The underlying life-cycle guideline requires the management of each phase by considering what happens in all the other phases. What clearly emerges from a research carried out by Iefe Bocconi is, on the one hand, the effectiveness of co-operation and networking between all the actors involved in the product environmental management within the different phases of its life cycle (policy makers, producers, retailers, consumers, NGOs, etc.) and, on the other, the opportunity of developing an integrated management of both environmental policy instruments and corporate management tools [it

Environmental Impact Assessment (EIA, Strategic Environmental Assessment (SEA and Sustainability in Minas Gerais

Directory of Open Access Journals (Sweden)

Evandro Sanguinetto

2011-07-01

Full Text Available This paper was aimed at conducting a bibliographical research on Environmental Impact Assessment (EIA, Strategic Environmental Assessment (SEA and their relation to the Ecological Economic Zoning (EEZ in the state of Minas Gerais. It is believed that the EIA is subject to failures as it does not take into account larger impacts upon space, time, cumulative and synergistic effects, whereas reflecting a reductionist point of view of the undertaking to the detriment of a broader, systemic, holistic perspective. With a view to compensate for such failure, the SEA is seen as an appropriate tool for the evaluation of political impacts, plans and programs which, conversely, guides the implementation of projects in an more integrated manner. Therefore, two EIAs can be used as reference; one refers to a rural electrification program in the state of Minas Gerais and the other approaches the integration planning of water sources in the metropolitan area of the state of São Paulo. While planning the Ecological Economic Zoning of the state, Minas Gerais takes a decisive step forward the reduction of conflicts related with multiple interests of economic development, providing and forming the basis for the essential balance among profit, preservation and environmental conservation, social justice, respect and cultural diversity, political and institutional maturation, ethic and plurality, which splash the sustainability colors on the canvas of the future.

Environmental Impacts of Plant-Based Diets: How Does Organic Food Consumption Contribute to Environmental Sustainability?

Science.gov (United States)

Lacour, Camille; Seconda, Louise; Allès, Benjamin; Hercberg, Serge; Langevin, Brigitte; Pointereau, Philippe; Lairon, Denis; Baudry, Julia; Kesse-Guyot, Emmanuelle

2018-01-01

Studies investigating diet-related environmental impacts have rarely considered the production method of the foods consumed. The objective of the present study, based on the NutriNet-Santé cohort, was to investigate the relationship between a provegetarian score and diet-related environmental impacts. We also evaluated potential effect modifications on the association between a provegetarian score and the environmental impacts of organic food consumption. Food intake and organic food consumption ratios were obtained from 34,442 French adults using a food frequency questionnaire, which included information on organic food consumption for each group. To characterize the overall structure of the diets, a provegetarian score was used to identify preferences for plant-based products as opposed to animal-based products. Moreover, three environmental indicators were used to assess diet-related environmental impacts: greenhouse gas (GHG) emissions, cumulative energy demand (CED), and land occupation. Environmental impacts were assessed using production life cycle assessment (LCA) at the farm level. Associations between provegetarian score quintiles, the level of organic food consumption, and environmental indicators were analyzed using ANCOVAs adjusted for energy, sex, and age. Participants with diets rich in plant-based foods (fifth quintile) were more likely to be older urban dwellers, to hold a higher degree in education, and to be characterized by an overall healthier lifestyle and diet. A higher provegetarian score was associated with lower environmental impacts (GHG emissions Q5vsQ1  = 838/1,664 kg CO 2eq /year, -49.6%, P  impacts but only among participants with diets rich in plant-based products. Future field studies should endeavor to integrate all the components of a sustainable diet, i.e., both diet composition and production methods.

Assessing the environmental impacts of freshwater consumption in LCA.

Science.gov (United States)

Pfister, Stephan; Koehler, Annette; Hellweg, Stefanie

2009-06-01

A method for assessing the environmental impacts of freshwater consumption was developed. This method considers damages to three areas of protection: human health, ecosystem quality, and resources. The method can be used within most existing life-cycle impact assessment (LCIA) methods. The relative importance of water consumption was analyzed by integrating the method into the Eco-indicator-99 LCIA method. The relative impact of water consumption in LCIA was analyzed with a case study on worldwide cotton production. The importance of regionalized characterization factors for water use was also examined in the case study. In arid regions, water consumption may dominate the aggregated life-cycle impacts of cotton-textile production. Therefore, the consideration of water consumption is crucial in life-cycle assessment (LCA) studies that include water-intensive products, such as agricultural goods. A regionalized assessment is necessary, since the impacts of water use vary greatly as a function of location. The presented method is useful for environmental decision-support in the production of water-intensive products as well as for environmentally responsible value-chain management.

Waste management programmatic environmental impact statement methodology for estimating human health risks

International Nuclear Information System (INIS)

Bergenback, B.; Blaylock, B.P.; Legg, J.L.

1995-05-01

The US Department of Energy (DOE) has produced large quantities of radioactive and hazardous waste during years of nuclear weapons production. As a result, a large number of sites across the DOE Complex have become chemically and/or radiologically contaminated. In 1990, the Secretary of Energy charged the DOE Office of Environmental Restoration and Waste management (EM) with the task of preparing a Programmatic Environmental Impact Statement (PEIS). The PEIS should identify and assess the potential environmental impacts of implementing several integrated Environmental Restoration (ER) and Waste Management (WM) alternatives. The determination and integration of appropriate remediation activities and sound waste management practices is vital for ensuring the diminution of adverse human health impacts during site cleanup and waste management programs. This report documents the PEIS risk assessment methodology used to evaluate human health risks posed by WM activities. The methodology presents a programmatic cradle to grave risk assessment for EM program activities. A unit dose approach is used to estimate risks posed by WM activities and is the subject of this document

CERCLA-linked environmental impact and benefit analysis: Evaluating remedial alternatives for the Portland Harbor Superfund Site, Portland, Oregon, USA.

Science.gov (United States)

McNally, Amanda D; Fitzpatrick, Anne G; Mirchandani, Sera; Salmon, Matthew; Edwards, Deborah A

2018-01-01

This analysis focused on evaluating the environmental consequences of remediation, providing indicators for the environmental quality pillar of 3 "pillars" of the Portland Harbor Sustainability Project (PHSP) framework (the other 2 pillars are economic viability and social equity). The project an environmental impact and benefit analysis (EIBA) and an EIBA-based cost-benefit analysis. Metrics developed in the EIBA were used to quantify and compare remedial alternatives' environmental benefits and impacts in the human and ecological domains, as a result of remedial actions (relative to no action). The cost-benefit results were used to evaluate whether remediation costs were proportionate or disproportionate to the environmental benefits. Alternatives B and D had the highest overall benefit scores, and Alternative F was disproportionately costly relative to its achieved benefits when compared to the other remedial alternatives. Indeed, the costlier alternatives with larger remedial footprints had lower overall EIBA benefit scores-because of substantially more air emissions, noise, and light impacts, and more disturbance to business, recreational access, and habitat during construction-compared to the less costly and smaller alternatives. Put another way, the adverse effects during construction tended to outweigh the long-term benefits, and the net environmental impacts of the larger remedial alternatives far outweighed their small incremental improvements in risk reduction. Results of this Comprehensive Environmental Response Compensation and Liability Act (CERCLA)-linked environmental analysis were integrated with indicators of economic and social impacts of remediation in a stakeholder values-based sustainability framework. These tools (EIBA, EIBA-based cost-benefit analysis, economic impact assessment, and the stakeholder values-based integration) provide transparent and quantitative evaluations of the benefits and impacts associated with remedial alternatives

Integrated nutrient management (INM) for sustaining crop productivity and reducing environmental impact: A review

International Nuclear Information System (INIS)

Wu, Wei; Ma, Baoluo

2015-01-01

The increasing food demands of a growing human population and the need for an environmentally friendly strategy for sustainable agricultural development require significant attention when addressing the issue of enhancing crop productivity. Here we discuss the role of integrated nutrient management (INM) in resolving these concerns, which has been proposed as a promising strategy for addressing such challenges. INM has multifaceted potential for the improvement of plant performance and resource efficiency while also enabling the protection of the environment and resource quality. This review examines the concepts, objectives, procedures and principles of INM. A comprehensive literature search revealed that INM enhances crop yields by 8–150% compared with conventional practices, increases water-use efficiency, and the economic returns to farmers, while improving grain quality and soil health and sustainability. Model simulation and fate assessment further reveal that reactive nitrogen (N) losses and GHG (greenhouse gas) emissions are reduced substantially under advanced INM practices. Lower inputs of chemical fertilizer and therefore lower human and environmental costs (such as intensity of land use, N use, reactive N losses and GHG emissions) were achieved under advanced INM practices without compromising crop yields. Various approaches and perspectives for further development of INM in the near future are also proposed and discussed. Strong and convincing evidence indicates that INM practice could be an innovative and environmentally friendly strategy for sustainable agriculture worldwide. - Highlights: • The increasing pressure to meet global cereal demand poses great challenge. • A changing environment further threatens cereal production. • Literature summary shows 8–150% yield advantage from use of INM method. • INM contributions to mitigation of environmental costs are remarkable. • High crop productivity and less environmental impact can be

Integrated nutrient management (INM) for sustaining crop productivity and reducing environmental impact: A review

Energy Technology Data Exchange (ETDEWEB)

Wu, Wei, E-mail: weiwu@nwsuaf.edu.cn [College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Agriculture and Agri-Food Canada, Eastern Cereal and Oilseed Research Centre (ECORC), Ottawa, ON K1A 0C6 (Canada); Ma, Baoluo, E-mail: Baoluo.Ma@AGR.GC.CA [Agriculture and Agri-Food Canada, Eastern Cereal and Oilseed Research Centre (ECORC), Ottawa, ON K1A 0C6 (Canada)

2015-04-15

The increasing food demands of a growing human population and the need for an environmentally friendly strategy for sustainable agricultural development require significant attention when addressing the issue of enhancing crop productivity. Here we discuss the role of integrated nutrient management (INM) in resolving these concerns, which has been proposed as a promising strategy for addressing such challenges. INM has multifaceted potential for the improvement of plant performance and resource efficiency while also enabling the protection of the environment and resource quality. This review examines the concepts, objectives, procedures and principles of INM. A comprehensive literature search revealed that INM enhances crop yields by 8–150% compared with conventional practices, increases water-use efficiency, and the economic returns to farmers, while improving grain quality and soil health and sustainability. Model simulation and fate assessment further reveal that reactive nitrogen (N) losses and GHG (greenhouse gas) emissions are reduced substantially under advanced INM practices. Lower inputs of chemical fertilizer and therefore lower human and environmental costs (such as intensity of land use, N use, reactive N losses and GHG emissions) were achieved under advanced INM practices without compromising crop yields. Various approaches and perspectives for further development of INM in the near future are also proposed and discussed. Strong and convincing evidence indicates that INM practice could be an innovative and environmentally friendly strategy for sustainable agriculture worldwide. - Highlights: • The increasing pressure to meet global cereal demand poses great challenge. • A changing environment further threatens cereal production. • Literature summary shows 8–150% yield advantage from use of INM method. • INM contributions to mitigation of environmental costs are remarkable. • High crop productivity and less environmental impact can be

Strategic Environmental Assessment: Integrated environmental management

CSIR Research Space (South Africa)

Department of Environmental Affairs and Tourism

2004-01-01

Full Text Available stream_source_info Department of Environmental Affairs and Tourism_2004.pdf.txt stream_content_type text/plain stream_size 70155 Content-Encoding ISO-8859-1 stream_name Department of Environmental Affairs and Tourism_2004.pdf... and Tourism Other topics in the series of overview information documents on the concepts of, and approaches to, integrated environmental management are listed below. Further titles in this series are being prepared and will be made available periodically...

UK Environmental Prediction - integration and evaluation at the convective scale

Science.gov (United States)

Fallmann, Joachim; Lewis, Huw; Castillo, Juan Manuel; Pearson, David; Harris, Chris; Saulter, Andy; Bricheno, Lucy; Blyth, Eleanor

2016-04-01

Traditionally, the simulation of regional ocean, wave and atmosphere components of the Earth System have been considered separately, with some information on other components provided by means of boundary or forcing conditions. More recently, the potential value of a more integrated approach, as required for global climate and Earth System prediction, for regional short-term applications has begun to gain increasing research effort. In the UK, this activity is motivated by an understanding that accurate prediction and warning of the impacts of severe weather requires an integrated approach to forecasting. The substantial impacts on individuals, businesses and infrastructure of such events indicate a pressing need to understand better the value that might be delivered through more integrated environmental prediction. To address this need, the Met Office, NERC Centre for Ecology & Hydrology and NERC National Oceanography Centre have begun to develop the foundations of a coupled high resolution probabilistic forecast system for the UK at km-scale. This links together existing model components of the atmosphere, coastal ocean, land surface and hydrology. Our initial focus has been on a 2-year Prototype project to demonstrate the UK coupled prediction concept in research mode. This presentation will provide an update on UK environmental prediction activities. We will present the results from the initial implementation of an atmosphere-land-ocean coupled system, including a new eddy-permitting resolution ocean component, and discuss progress and initial results from further development to integrate wave interactions in this relatively high resolution system. We will discuss future directions and opportunities for collaboration in environmental prediction, and the challenges to realise the potential of integrated regional coupled forecasting for improving predictions and applications.

Monitoring trends of urban development and environmental impact of Beijing, 1999-2006

International Nuclear Information System (INIS)

Liu Gengyuan; Yang, Zhifeng; Chen Bin; Ulgiati, Sergio

2011-01-01

The high rates of environmental change and accelerated species loss in the urban development process should be quantified to rebalance the social and environmental dimensions of sustainability. In this study, an emergy-based environmental impact assessment model is designed according to the framework of the Eco-Indicator 99 for monitoring the negative effects on human well-being and ecosystem integrity in the urban development system of Beijing from 1999 to 2006. The environmental impact assessment model is based on the sustainability promotion perspective, and emphasizes the determinants of human health and ecosystem integrity in the urban development process. It is vital that the links among human health, ecosystem integrity and urban sustainability are therefore considered especially from the perspective of a supply-side environmental cost evaluation (including ecological service supply, ecological and economic losses and investment for treatment). Results suggest that: (1) out of all the pollutants, ecological services were mainly used to dilute sulfur dioxide and NH 3 -N; (2) nitrogen dioxide and greenhouse gases released by the urban system contribute heavily to both ecological and economic losses evaluated in emergy terms; and (3) emissions impact, mainly from airborne pollutants, with small contribution from waterborne emissions, generally increases from 1999 to 2006, undermining the sustainability of Beijing. The emergy synthesis proves to be very appropriate to account for large-scale and indirect costs generated by pollution as side effects of economic activity. Such knowledge is a necessary pre-requisite to perform a reliable cost-benefit evaluation of urban sustainability strategies, and provide guidance for policy decision making to maximize benefits and minimize negative impacts. - Research highlights: → We design an emergy-based environmental impact assessment model. → It takes dilution effects into account to monitor the negative effects to

Salt Lake City Utah Integrated Projects electric power marketing. Final environmental impact statement, Volume 5: Appendix E

International Nuclear Information System (INIS)

1996-01-01

The Colorado River Storage Project Customer Service Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Colorado, Green, Gunnison, and Rio Grande rivers and on Plateau Creek in Arizona, Colorado, Utah, Wyoming, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams) are influenced by Western power scheduling and transmission decisions. The environmental impact statement (EIS) alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Western's firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this EIS include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources. Western has identified commitment-level alternative 1, the Post-1989 commitment level, as its preferred alternative. The impact evaluations indicate that this commitment level is also the environmentally preferred alternative

Human health and wellbeing in environmental impact assessment in New South Wales, Australia: Auditing health impacts within environmental assessments of major projects

International Nuclear Information System (INIS)

Harris, Patrick J.; Harris, Elizabeth; Thompson, Susan; Harris-Roxas, Ben; Kemp, Lynn

2009-01-01

Internationally the inclusion of health within environmental impact assessment (EIA) has been shown to be limited. While Australian EIA documentation has not been studied empirically to date, deficiencies in practice have been documented. This research developed an audit tool to undertake a qualitative descriptive analysis of 22 Major Project EAs in New South Wales, Australia. Results showed that health and wellbeing impacts were not considered explicitly. They were, however, included indirectly in the identification of traditional public health exposures associated with the physical environment and to a lesser extent the inclusion of social and economic impacts. However, no health data was used to inform any of the assessments, there was no reference to causal pathways between exposures or determinants and physical or mental health effects, and there was no inclusion of the differential distribution of exposures or health impacts on different populations. The results add conceptually and practically to the long standing integration debate, showing that health is in a position to add value to the EIA process as an explicit part of standard environmental, social and economic considerations. However, to overcome the consistently documented barriers to integrating health in EIA, capacity must be developed amongst EIA professionals, led by the health sector, to progress health related knowledge and tools.

76 FR 61106 - Notice of Intent To Prepare an Environmental Impact Statement

Science.gov (United States)

2011-10-03

... an Environmental Impact Statement Summary: In accordance with the National Environmental Policy Act... small agricultural community located in western Maryland. The campus is a component of the National... gsf. Approximately 199 people work at the NIH Animal Center site. A Master Plan is an integrated...

10 CFR 51.93 - Distribution of final environmental impact statement and supplement to final environmental impact...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of final environmental impact statement and supplement to final environmental impact statement; news releases. 51.93 Section 51.93 Energy NUCLEAR... Environmental Impact Statements-General Requirements § 51.93 Distribution of final environmental impact...

The environmental Impacts of tobaccos

International Nuclear Information System (INIS)

Shah, J.; Sohail, N.

2006-01-01

Tobacco is an important cash crop in Pakistan. It is a sensitive plant, prone to bacterial, fungal and viral diseases. Therefore, high levels of pesticides are used to grow tobacco. Many of these pesticides are highly toxic and have profound impacts not only on the smokers but also on the lives of tobacco farmers, their families and the environment. The environmental impacts of tobacco crop start right from its seedlings stage till throwing away of cigarette filters. These impacts are divided into three stages: (a) Environmental impacts at the tobacco growing stage, (b) Environmental impacts at tobacco manufacturing/processing stage, and (c) Environmental impacts of the tobacco use. This paper provides information of environmental impacts of tobacco crop at all the above-mentioned three stages and recommends measures for mitigation. (author)

33 CFR Appendix C to Part 273 - Information Requirements for Aquatic Plant Control Program Environmental Impact Statements

Science.gov (United States)

2010-07-01

... Aquatic Plant Control Program Environmental Impact Statements C Appendix C to Part 273 Navigation and... Environmental Impact Statements 1. Description of the problem. a. Pests. Identify the pest to be controlled by.... Relationship to environmental situation. Non-target organisms and integrated pest management programs. 2...

New technology in everyday life - social processes and environmental impact

DEFF Research Database (Denmark)

Røpke, Inge

2001-01-01

aspect both of changes in everyday life and of the environmental impact of everyday-life activities. Technological change is often seen as an important part of the solutions to environmental problems, however, when technological change is seen from the perspective of everyday life, this image becomes...... more complex. In this paper technological changes are explored from the perspective of consumption and everyday life, and it is argued that environmental impacts arise through the interplay of technology, consumption and everyday life. Firstly, because technological renewals form integral parts...... influence the environment in the long run. The paper points to the need for further studies of the long term interplay between new technologies, everyday life and the environment....

Environmental impact assessment report

Energy Technology Data Exchange (ETDEWEB)

Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

2000-10-01

This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

Evaluation Tools of nanomaterials environmental impact

International Nuclear Information System (INIS)

Barberio, Grazia; Scalbi, Simona; Buttol, Patrizia; Masoni, Paolo; Righi, Serena

2015-01-01

Nanotechnology show an increasing spread thanks to the special properties of nanomaterials (NM). Knowledge of the NM behavior and interactions with the environment and human health is still insufficient to assess the impact of the NM. A multidisciplinary, multidimensional and systemic such as that of the life cycle (Life Cycle Thinking - LCT), applied through the tool Life Cycle Assessment (LCA), is essential in environmental sustainability assessment of technologies, with some limitations that can be overcome through integration with other instruments such as, for example, non-linear models, analysis of flows of material, Risk Assessment (RA). This article offers a detailed analysis of the state and the main problems related to the application of LCA and RA to NM both separately and in combined use; They will then discuss the strategies and integrations needed to overcome the limitations of both methods and obtain robust assessments of the impacts on health and the environment [it

Interdisciplinary environmental impact statement examinations with parallel licensing procedures

International Nuclear Information System (INIS)

Gassner, E.

1990-01-01

The article investigates the question how the interdisciplinary, collective, integrative environmental impact statement can predominate the decisions in individual licensing procedures. It illustrates the requirements of the Act on Environmental Impact Statements. According to this Act, measures are to be found which deal with the overall complex, i.e. the entire system. In the article, the monitoring project organization's primary responsibility is emphasized: Analysis and prognosis of a project's environmental impacts are transferred to this organization for decision-preparation. Subsequent corrections or supplementations during the official approval procedure, or incorporation of the public through the authorities, do not change the matter. An all-comprehensive assessment must be based on all-comprehensive standards. From the point of view of immissions this is minimization of adverse effects on the nature cycle and landscape matters; from the point of view of emissions it is the duty of environment-compatible waste management within the sense of waste management legislation having to serve public welfare. (orig.) [de

Life-cycle assessment of energy consumption and environmental impact of an integrated food waste-based biogas plant

International Nuclear Information System (INIS)

Jin, Yiying; Chen, Ting; Chen, Xin; Yu, Zhixin

2015-01-01

Highlights: • 47.76% of the energy consumption is from the primary treatment process. • The dominant environmental impact comes from GWP100 emission (96.97 kgCO 2 -eq/t). • Increasing recycling rate of product can effectively reduce consumption and impact. - Abstract: Recycling food waste to produce biogas by anaerobic digestion (AD) is a promising process that can both provide renewable energy and dispose solid waste safely. However, this process affects the environment due to greenhouse gas emissions. By lifecycle assessment (LCA), we assessed the energy consumption (EC) and environmental impact (EI) of an integrated food waste-based biogas system and its subsystems. Data were collected from an actual plant in China that adopted a combination of wet-heat treatment and wet AD process at thermophilic condition. The EC of the system for processing 1 ton of waste was 663.89 MJ, among which 47.76% was from the primary treatment process (including pretreatment and AD). The GWP 100 (100-year global warming potential) emission of the system reached 96.97 kgCO 2 -eq/t, and the AP (acidification potential), EP (eutrophication potential), HTP inf (human toxicity potential) and FAETP inf (fresh water ecotoxicity) emissions were low. The EI was mainly generated by two subsystems, namely, the primary treatment and the secondary pollution control. Sensitivity analysis showed that a 40% increase of the feed fat content resulted in 38% increase in the net energy value output and 48% decrease in EP effect. The increase in oil content and biogas production rate could significantly reduce the EC and EI of the system. It has been shown that improving the technology of the process and increasing the recycling rate of products will result in the reduction of EC and EI of the biogas system. In addition, a quantitative assessment model of EC and EI in integrated food waste-based biogas technology is established

Integrating Environmental and Human Health Databases in the Great Lakes Basin: Themes, Challenges and Future Directions

Directory of Open Access Journals (Sweden)

Kate L. Bassil

2015-03-01

Full Text Available Many government, academic and research institutions collect environmental data that are relevant to understanding the relationship between environmental exposures and human health. Integrating these data with health outcome data presents new challenges that are important to consider to improve our effective use of environmental health information. Our objective was to identify the common themes related to the integration of environmental and health data, and suggest ways to address the challenges and make progress toward more effective use of data already collected, to further our understanding of environmental health associations in the Great Lakes region. Environmental and human health databases were identified and reviewed using literature searches and a series of one-on-one and group expert consultations. Databases identified were predominantly environmental stressors databases, with fewer found for health outcomes and human exposure. Nine themes or factors that impact integration were identified: data availability, accessibility, harmonization, stakeholder collaboration, policy and strategic alignment, resource adequacy, environmental health indicators, and data exchange networks. The use and cost effectiveness of data currently collected could be improved by strategic changes to data collection and access systems to provide better opportunities to identify and study environmental exposures that may impact human health.

Canadian insights: The challenges of an integrated environmental assessment framework

International Nuclear Information System (INIS)

McCaig, Karen

2005-01-01

The paper draws results from a review of literature to examine the strengths and weaknesses of the integrated environmental assessment framework in Canada with respect to the inclusion of health impact assessment. Insights include the legislative nature, rigid structure and priority for the natural environment that may restrict progress and the pool of government agencies that need to be convinced of the benefits of health impact assessment that may provide a strong structure for compliance in the long term

Is environmental impact assessment regulation a 'burden' to private firms?

International Nuclear Information System (INIS)

Annandale, David; Taplin, Ross

2003-01-01

The impact of environmental regulation on macroeconomic performance has been studied in some depth over the last 15 years. Similarly, impact on profit performance, investment intention and location decisions of firms has also been studied, although in less depth. There has been less academic interest, however, in the impact that environmental regulation has on the strategic objectives of companies. This article reports on a research project that focused on the impact that environmental approvals regulation (predominantly environmental impact assessment, EIA) has on proposed new development in the international mining sector. Based on a large and externally valid survey of senior mining company executives in Australia and Canada in the late 1990s, the research indicated that a significant majority of firms consider the environmental approvals process to be an important determinant of investment strategy. An initial reaction to these figures might suggest that the majority of respondents believe the environmental approvals process to be a negative influence. However, further questioning indicated that only a small proportion of companies in both countries thought of the environmental approvals process as an impediment to development. Instead, it is clear that most firms see EIA as a catalyst for integrating environmental design into the early planning of a project, thereby alleviating the need to spend money on overcoming environmental problems once a poorly designed project has been commissioned. The somewhat surprising conclusion that companies see environmental approvals regulation as important, but as an encouragement to development rather than as an impediment, goes against much previous industry and academic comment and, at least in relation to the mining sector, refutes the idea that EIA is ''burdensome''

Methodologies of environmental impact assessment

International Nuclear Information System (INIS)

Schroll, H.

1994-01-01

This article gives a brief introduction covering the objectives of environmental impact assessment (EIA) and sustainable development, before going on to describe the screening procedure to define the environmental and socio-economic impacts of projects. The EIA procedure outlined encompasses a description of the project, examination of all environmental effects (scoping), identification of existing and predicted environmental conditions and impacts, alternative measures and mitigating measures, co-ordination, with environmental regulations, public participation, and monitoring and approval of the EIA. (UK)

Impact of environmental auditing on environmental pollution ...

African Journals Online (AJOL)

Impact of environmental auditing on environmental pollution, sustainable development and healthy environment of some organizations in Port Harcourt, Nigeria. ... Journal of Applied Sciences and Environmental Management. Journal Home ...

The methodology of environmental impacts assessment of environmentally hazardous facilities

OpenAIRE

Adamenko, Yaroslav

2017-01-01

The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

Modeling for waste management associated with environmental-impact abatement under uncertainty.

Science.gov (United States)

Li, P; Li, Y P; Huang, G H; Zhang, J L

2015-04-01

Municipal solid waste (MSW) treatment can generate significant amounts of pollutants, and thus pose a risk on human health. Besides, in MSW management, various uncertainties exist in the related costs, impact factors, and objectives, which can affect the optimization processes and the decision schemes generated. In this study, a life cycle assessment-based interval-parameter programming (LCA-IPP) method is developed for MSW management associated with environmental-impact abatement under uncertainty. The LCA-IPP can effectively examine the environmental consequences based on a number of environmental impact categories (i.e., greenhouse gas equivalent, acid gas emissions, and respiratory inorganics), through analyzing each life cycle stage and/or major contributing process related to various MSW management activities. It can also tackle uncertainties existed in the related costs, impact factors, and objectives and expressed as interval numbers. Then, the LCA-IPP method is applied to MSW management for the City of Beijing, the capital of China, where energy consumptions and six environmental parameters [i.e., CO2, CO, CH4, NOX, SO2, inhalable particle (PM10)] are used as systematic tool to quantify environmental releases in entire life cycle stage of waste collection, transportation, treatment, and disposal of. Results associated with system cost, environmental impact, and the related policy implication are generated and analyzed. Results can help identify desired alternatives for managing MSW flows, which has advantages in providing compromised schemes under an integrated consideration of economic efficiency and environmental impact under uncertainty.

10 CFR 51.74 - Distribution of draft environmental impact statement and supplement to draft environmental impact...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement and supplement to draft environmental impact statement; news releases. 51.74 Section 51.74 Energy NUCLEAR... Impact Statements § 51.74 Distribution of draft environmental impact statement and supplement to draft...

HOLISTIC APPROACH FOR ASSESSING THE PRESENCE AND POTENTIAL IMPACTS OF WATERBORNE ENVIRONMENTAL CONTAMINANTS

Science.gov (United States)

As an integral part of our continuing research in environmental quality assessment approaches, we have developed a variety of passive integrative sampling devices widely applicable for use in defining the presence and potential impacts of a broad array of contaminants. The semipe...

Environmental impact assessment in higher education institutions in East Africa: the case of Rwanda.

Science.gov (United States)

Kabera, Telesphore

2017-03-01

Due to the pressure on limited resources produced by a growing population and due to a decade of war, Rwanda is facing a major problem in environmental protection. Because of such problems, it seems only reasonable that environment-related courses should play an important role in the curricula of institutions of higher learning. The main aim of this research is to present a comprehensive picture of Environmental Impact Assessment (EIA) integration in graduate and undergraduate programs in Rwandese higher education institutions and to make recommendations for its improvement. During this study, two surveys were conducted: the first survey targeted Environmental Impact Assessment lecturers and the second survey was for Environmental Impact Assessment practitioners (including EIA certified experts and competent authorities). The study found that Environmental Impact Assessment is not well established in these institutions and it is not taught in some programs; civil engineering, for example, has no Environmental Impact Assessment courses. Recommendations to improve EIA education are proposed, such as requiring that a common core course in Environmental Impact Assessment be made available in Rwandese higher learning institutions.

Integration of Environmental Issues in a Physics Course: 'Physics by Inquiry' High School Teachers' Integration Models and Challenges

Science.gov (United States)

Kimori, David Abiya

As we approach the second quarter of the twenty-first century, one may predict that the environment will be among the dominant themes in the political and educational discourse. Over the past three decades, particular perspectives regarding the environment have begun to emerge: (i) realization by human beings that we not only live on earth and use its resources at an increasingly high rate but we also actually belong to the earth and the total ecology of all living systems, (ii) there are strong interactions among different components of the large and complex systems that make up our environment, and (iii) the rising human population and its impact on the environment is a great concern (Hughes & Mason, 2014). Studies have revealed that although the students do not have a deep understanding of environmental issues and lack environmental awareness and attitudes necessary for protecting the environment, they have great concern for the environment (Chapman & Sharma, 2001; Fien, Yencken, & Sykes, 2002). However, addressing environmental issues in the classroom and other disciplines has never been an easy job for teachers (Pennock & Bardwell, 1994; Edelson, 2007). Using multiple case studies, this study investigated how three purposefully selected physics teachers teaching a 'Physics by Inquiry' course integrated environmental topics and issues in their classroom. Particularly this study looked at what integration models and practices the three physics teachers employed in integrating environmental topics and issues in their classroom and what challenges the teachers faced while integrating environmental topics in their classrooms. Data collection methods including field notes taken from observations, teachers' interviews and a collection of artifacts and documents were used. The data were coded analyzed and organized into codes and categories guided by Fogarty (1991) models of curriculum integration and Ham and Sewing (1988) four categories of barriers to environmental

Implementation Plan. Environmental Restoration and Waste Management Programmatic Environmental Impact Statement

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

In accordance with the Department of Energy`s National Environmental Policy Act implementing procedures in Volume 10 of the Code of Federal Regulations, Section 1021,312, the Environmental Restoration and Waste Management Programmatic Environmental Impact Statement Implementation Plan has two primary purposes: to provide guidance for the preparation of the Programmatic Environmental Impact Statement and to record the issues resulting from the scoping and the extended public participation process. The Implementation Plan identifies and discusses the following: background of Environmental Restoration and Waste Management activities, the purpose of the Programmatic Environmental Impact Statement, and the relationship of the Programmatic Environmental Impact Statement to other Departmental initiatives (Chapter 1); need and purposes for action (Chapter 2); scoping process and results of the public participation program in defining the scope of the Programmatic Environmental Impact Statement, including a summary of the comments received and their disposition (Chapter 3); planned scope and content of the Programmatic Environmental Impact Statement (Chapter 4); consultations with other agencies and the role of cooperating agencies (Chapter 5); planned schedule of major Programmatic Environmental Impact Statement milestones (Chapter 6); and responsibilities for preparation of the Programmatic Environmental Impact Statement (Chapter 7).

Integrating Fuzzy Logic, Optimization, and GIS for Ecological Impact Assessments

Science.gov (United States)

Bojórquez-Tapia, Luis A.; Juárez, Lourdes; Cruz-Bello, Gustavo

2002-09-01

Appraisal of ecological impacts has been problematic because of the behavior of ecological system and the responses of these systems to human intervention are far from fully understood. While it has been relatively easy to itemize the potential ecological impacts, it has been difficult to arrive at accurate predictions of how these impacts affect populations, communities, or ecosystems. Furthermore, the spatial heterogeneity of ecological systems has been overlooked because its examination is practically impossible through matrix techniques, the most commonly used impact assessment approach. Besides, the public has become increasingly aware of the importance of the EIA in decision-making and thus the interpretation of impact significance is complicated further by the different value judgments of stakeholders. Moreover, impact assessments are carried out with a minimum of data, high uncertainty, and poor conceptual understanding. Hence, the evaluation of ecological impacts entails the integration of subjective and often conflicting judgments from a variety of experts and stakeholders. The purpose of this paper is to present an environmental impact assessment approach based on the integration fuzzy logic, geographical information systems and optimization techniques. This approach enables environmental analysts to deal with the intrinsic imprecision and ambiguity associated with the judgments of experts and stakeholders, the description of ecological systems, and the prediction of ecological impacts. The application of this approach is illustrated through an example, which shows how consensus about impact mitigation can be attained within a conflict resolution framework.

Salt Lake City Area Integrated Projects electric power marketing final environmental impact statement. Volume 4: Appendixes B-D

International Nuclear Information System (INIS)

1996-01-01

The Colorado River Storage Project Customer Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Colorado, Green, Gunnison, and Rio Grande rivers and on Plateau Creek in Arizona, Colorado, Utah, Wyoming, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams) are influenced by Western power scheduling and transmission decisions. The environmental impact statement (EIS) alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Western's firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this EIS include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources. Western has identified commitment-level alternative 1, the Post-1989 commitment level, as its preferred alternative. The impact evaluations indicate that this commitment level is also the environmentally preferred alter native

Salt Lake City Area Integrated Projects electric power marketing -- Final environmental impact statement. Volume 2: Sections 1--16

International Nuclear Information System (INIS)

1996-01-01

The Colorado River Storage Project Customer Service Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Colorado, Green, Gunnison, and Rio Grande rivers and on Plateau Creek in Arizona, Colorado, Utah, Wyoming, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams) are influenced by Western power scheduling and transmission decisions. The environmental impact statement (EIS) alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Western's firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this EIS include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources. Western has identified commitment-level alternative 1, the Post-1989 commitment level, as its preferred alternative. The impact evaluations indicate that this commitment level is also the environmentally preferred alternative

Strategic environmental assessment policy integration model for solid waste management in Malaysia

International Nuclear Information System (INIS)

Victor, Dennis; Agamuthu, P.

2013-01-01

Highlights: • We identified policy drivers of SEA in solid waste policy planning. • The SEA primary policy drivers are benefits, barriers and enablers need. • The SEA sub-drivers are environmental attitude and environmental awareness. • Optimal SEA policy integration requires public participation and capacity building. • SEA integration should be a long-term sustainable policy strategy for SWM. -- Abstract: This paper examines the strategic environmental assessment (SEA) systemic policy drivers for solid waste management (SWM) policies, plans and programmes (PPP) in Malaysia. Solid waste generation in Malaysia has been increasing drastically from 9.0 million tonnes in 2000 to an expected 15.6 million tonnes in 2020. This projected rate of solid waste generation is expected to burden the country's environmental and water quality resources. The key problem the study frames is the lack of environmental integration in the SWM process which is only conducted during the environmental impact assessments (EIA) stage of SWM facilities. The purpose of this study is to expand the SEA subject knowledge by validating a behaviour based theoretical framework and identifying key policy drivers that influence the integration of SEA in SWM policy planning. The study methodology utilized a confirmatory covariance based structural equation modelling approach to validate the proposed theoretical model based on the policy makers/implementers interview questionnaire data collection. The study findings indicate five latent SEA policy drivers which were named policy knowledge, environmental attitude, perceived benefits, perceived barriers and perceived enablers. The study has conceptualized and tested a SEA policy model which indicates that SEA integration behaviour is influenced directly by three main drivers (perception of benefits, perception of barriers and perception of enablers) and influenced indirectly by two sub-drivers environmental attitude and environmental knowledge

Integrating environmental control for coal plant efficiency

Energy Technology Data Exchange (ETDEWEB)

Shepard, M

1986-01-01

As emission control requirements for power plants have grown more stringent, utilities have added new environmental protection technology. As environmental controls have been added one after another, plant designers have rarely had the opportunity to integrate these components with each other and the balance of the plant. Consequently they often cost more to build and operate and can reduce power plant efficiency and availability. With the aim of lowering the cost of environmental systems, a design approach known as integrated environmental control (IEC) has emerged. This is based on the premise that environmental controls can function most economically if they are designed integrally with other power generation equipment. EPRI has established an IEC progam to develop integrated design strategies and evaluate their net worth to utilities. Various aspects of this program are described. (3 refs.)

Regional analysis and environmental impact assessment

International Nuclear Information System (INIS)

Parzyck, D.C.; Brocksen, R.W.; Emanuel, W.R.

1976-01-01

This paper presents a number of techniques that can be used to assess environmental impacts on a regional scale. Regional methodologies have been developed which examine impacts upon aquatic and terrestrial biota in regions through consideration of changes in land use, land cover, air quality, water resource use, and water quality. Techniques used to assess long-range atmospheric transport, water resources, effects on sensitive forest and animal species, and impacts on man are presented in this paper, along with an optimization approach which serves to integrate the analytical techniques in an overall assessment framework. A brief review of the research approach and certain modeling techniques used within one regional studies program is provided. While it is not an all inclusive report on regional analyses, it does present an illustration of the types of analyses that can be performed on a regional scale

Environmental Impacts of Plant-Based Diets: How Does Organic Food Consumption Contribute to Environmental Sustainability?

Directory of Open Access Journals (Sweden)

Camille Lacour

2018-02-01

Full Text Available BackgroundStudies investigating diet-related environmental impacts have rarely considered the production method of the foods consumed. The objective of the present study, based on the NutriNet-Santé cohort, was to investigate the relationship between a provegetarian score and diet-related environmental impacts. We also evaluated potential effect modifications on the association between a provegetarian score and the environmental impacts of organic food consumption.MethodsFood intake and organic food consumption ratios were obtained from 34,442 French adults using a food frequency questionnaire, which included information on organic food consumption for each group. To characterize the overall structure of the diets, a provegetarian score was used to identify preferences for plant-based products as opposed to animal-based products. Moreover, three environmental indicators were used to assess diet-related environmental impacts: greenhouse gas (GHG emissions, cumulative energy demand (CED, and land occupation. Environmental impacts were assessed using production life cycle assessment (LCA at the farm level. Associations between provegetarian score quintiles, the level of organic food consumption, and environmental indicators were analyzed using ANCOVAs adjusted for energy, sex, and age.ResultsParticipants with diets rich in plant-based foods (fifth quintile were more likely to be older urban dwellers, to hold a higher degree in education, and to be characterized by an overall healthier lifestyle and diet. A higher provegetarian score was associated with lower environmental impacts (GHG emissionsQ5vsQ1 = 838/1,664 kg CO2eq/year, −49.6%, P < 0.0001; CEDQ5vsQ1 = 4,853/6,775 MJ/year, −26.9%, P < 0.0001; land occupationQ5vsQ1 = 2,420/4,138 m2/year, −41.5%, P < 0.0001. Organic food consumption was also an important modulator of the relationship between provegetarian dietary patterns and environmental impacts but only

Environmental Impact Assessment: A Procedure.

Science.gov (United States)

Stover, Lloyd V.

Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

46 CFR 504.7 - Environmental impact statements.

Science.gov (United States)

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Environmental impact statements. 504.7 Section 504.7... POLICY ANALYSIS § 504.7 Environmental impact statements. (a) General. (1) An environmental impact... environmental impact statements. (1) A draft environmental impact statement (DEIS) will initially be prepared in...

Environmental Performance and Financing Decisions Impact on Sustainable Financial Development of Chinese Environmental Protection Enterprises

Directory of Open Access Journals (Sweden)

Kai Quan Zhang

2017-12-01

Full Text Available Environmental protection firms need to improve their ability to access financing while maintaining good economic performance under mounting environmental pressures. After the integration of trade-off and stakeholder theories, we have constructed a number of mathematical models to investigate the relationship among financing decisions, environmental performance (EP, and economic performance. Unbalanced panel data from environmental protection companies listed on Chinese stock exchanges from 2007 to 2016 were collected and analyzed. Our results have confirmed that debt financing has a significant impact on short- and long-term economic performance. Firms prefer long-term debt over short-term debt to improve their financial sustainability. Internal financing is positively related to performance because the cost of financing is lower. Environmental performance can cause extra financial burden in the short run, but will improve stakeholder relations and profitability in the long run. Our study suggests that environmental performance affects the relationship between financing decisions and economic performance. When EP initiatives are high, debt financing has a greater negative influence on short-term performance, and the effect on long-term performance is mitigated. High EP also reduces the impact of internal financing on performance.

A numerical calculation method of environmental impacts for the deep sea mining industry - a review.

Science.gov (United States)

Ma, Wenbin; van Rhee, Cees; Schott, Dingena

2018-03-01

Since the gradual decrease of mineral resources on-land, deep sea mining (DSM) is becoming an urgent and important emerging activity in the world. However, until now there has been no commercial scale DSM project in progress. Together with the reasons of technological feasibility and economic profitability, the environmental impact is one of the major parameters hindering its industrialization. Most of the DSM environmental impact research focuses on only one particular aspect ignoring that all the DSM environmental impacts are related to each other. The objective of this work is to propose a framework for the numerical calculation methods of the integrated DSM environmental impacts through a literature review. This paper covers three parts: (i) definition and importance description of different DSM environmental impacts; (ii) description of the existing numerical calculation methods for different environmental impacts; (iii) selection of a numerical calculation method based on the selected criteria. The research conducted in this paper provides a clear numerical calculation framework for DSM environmental impact and could be helpful to speed up the industrialization process of the DSM industry.

Environmental management throughout the mining cycle: a proactive and integrated approach - 5288

International Nuclear Information System (INIS)

Lacroix, E.; Rayot, V.; Descostes, M.; Luquet de Saint Germain, V.; Recoche, G.

2015-01-01

Industrial activities such as mining generate environmental impacts. The purpose of AREVA Mines is to avoid and/or to minimize them as much as possible in order to improve its integration into its environment. In this article AREVA environmental strategy is illustrated by 3 case studies: -) project and exploration works in Mongolia, -) the post-mining remediation in Mongolia and Kazakhstan, and -) the closing of the Bellezane (France) site. In conclusion, AREVA environmental strategy for its mining activities is: -) assuming a proactive approach to prevent potential risks and impacts on environment, -) developing a scientific and detailed knowledge of the impacts on environment and implementing appropriate mitigation measures, -) monitoring the environment at the earliest stages of the mining cycle, -) investing in research and development to improve our practices, and -) taking into account the concerns and the knowledge of our stakeholders, and the social and cultural aspects directly linked to the site environment

Integrated environmental modeling: a vision and roadmap for the future

Science.gov (United States)

Laniak, Gerard F.; Olchin, Gabriel; Goodall, Jonathan; Voinov, Alexey; Hill, Mary; Glynn, Pierre; Whelan, Gene; Geller, Gary; Quinn, Nigel; Blind, Michiel; Peckham, Scott; Reaney, Sim; Gaber, Noha; Kennedy, Philip R.; Hughes, Andrew

2013-01-01

Integrated environmental modeling (IEM) is inspired by modern environmental problems, decisions, and policies and enabled by transdisciplinary science and computer capabilities that allow the environment to be considered in a holistic way. The problems are characterized by the extent of the environmental system involved, dynamic and interdependent nature of stressors and their impacts, diversity of stakeholders, and integration of social, economic, and environmental considerations. IEM provides a science-based structure to develop and organize relevant knowledge and information and apply it to explain, explore, and predict the behavior of environmental systems in response to human and natural sources of stress. During the past several years a number of workshops were held that brought IEM practitioners together to share experiences and discuss future needs and directions. In this paper we organize and present the results of these discussions. IEM is presented as a landscape containing four interdependent elements: applications, science, technology, and community. The elements are described from the perspective of their role in the landscape, current practices, and challenges that must be addressed. Workshop participants envision a global scale IEM community that leverages modern technologies to streamline the movement of science-based knowledge from its sources in research, through its organization into databases and models, to its integration and application for problem solving purposes. Achieving this vision will require that the global community of IEM stakeholders transcend social, and organizational boundaries and pursue greater levels of collaboration. Among the highest priorities for community action are the development of standards for publishing IEM data and models in forms suitable for automated discovery, access, and integration; education of the next generation of environmental stakeholders, with a focus on transdisciplinary research, development, and

Environmental Impact Section

International Nuclear Information System (INIS)

Anon.

1977-01-01

The Section is concerned with preparation of environmental statements and assessments and development of assessment methodologies for energy technologies. During 1976, activities involved nuclear, fossil, and geothermal energy; this work was supported by the U.S.Army, HUD, US ERDA, and US NRC. Two special studies--one on the effects of power plant intake structures on fish impingement and another on multiple uses of cooling lakes--were completed and should serve as references for future analyses. Two research projects sponsored by NRC--the Unified Transport Approach (UTA) to Power Plant Assessment and the Environmental Monitoring Data Evaluation Study--were continued. The purpose of the UA program is to develop fast-transient, one- and two-dimensional transport models for estimating thermal, radiological, chemical, and biological impacts in complicated water bodies. The impact of public use of various products that contain radioactive isotope is being evaluated. The Environmental Impact Sections assistance to NRC expanded to include assessments of fuel-fabrication facilities being considered for relicensing and two uranium in-situ solution mining facility proposals. The work for HUD comprises an assessment of the first application of MIUS in a new town development. A generic environmental statement was prepared and an environmental monitoring program for the facility was designed

21 CFR 25.42 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.42 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Preparation of Environmental Documents § 25.42 Environmental impact... be a clear, concise, and detailed written statement describing: (1) The environmental impacts of a...

Integrated assessment and environmental policy making. In pursuit of usefulness

International Nuclear Information System (INIS)

Parson, E.A.

1995-01-01

Current integrated assessment projects primarily seek end to end integration through formal models at a national to global scale, and show three significant representational weaknesses: determinants of decadal-scale emissions trends; valuing impacts and adaptive response; and the formation and effects of policies. Meeting the needs of policy audiences may require other forms of integration; may require integration by formal modeling or by other means; and may require representing decisions of other actors through political and negotiating processes. While rational global environmental policy making requires integrated assessment, current practice admits no single vision of how to do it, so understanding will be best advanced by a diverse collection of projects pursuing distinct methods and approaches. Further practice may yield some consensus on best practice, possibly including generic assessment skills generalizable across issues. (Author)

Environmental sustainable decision making – The need and obstacles for integration of LCA into decision analysis

DEFF Research Database (Denmark)

Dong, Yan; Miraglia, Simona; Manzo, Stefano

2018-01-01

systems, revealing potential problem shifting between life cycle stages. Through the integration with traditional risk based decision analysis, LCA may thus facilitate a better informed decision process. In this study we explore how environmental impacts are taken into account in different fields......Decision analysis is often used to help decision makers choose among alternatives, based on the expected utility associated to each alternative as function of its consequences and potential impacts. Environmental impacts are not always among the prioritized concerns of traditional decision making...... of interest for decision makers to identify the need, potential and obstacles for integrating LCA into conventional approaches to decision problems. Three application areas are used as examples: transportation planning, flood management, and food production and consumption. The analysis of these cases shows...

Environmental impacts of climate change adaptation

Energy Technology Data Exchange (ETDEWEB)

Enríquez-de-Salamanca, Álvaro, E-mail: aenriquez@draba.org [Universidad Nacional de Educación a Distancia (UNED)/Draba Ingeniería y Consultoría Medioambiental, Cañada Nueva, 13, 28200 San Lorenzo de El Escorial (Spain); Díaz-Sierra, Rubén, E-mail: sierra@dfmf.uned.es [Departamento de Física Matemática y de Fluidos, Facultad de Ciencias, Universidad Nacional de Educación a Distancia (UNED), Paseo Senda del Rey, 9, 28040 Madrid (Spain); Martín-Aranda, Rosa M., E-mail: rmartin@ccia.uned.es [Departamento de Química Inorgánica y Química Técnica, Facultad de Ciencias, Universidad Nacional de Educación a Distancia (UNED), Paseo Senda del Rey, 9, 28040 Madrid (Spain); Santos, Maria J., E-mail: M.J.FerreiraDosSantos@uu.nl [Department of Innovation, Environmental and Energy Sciences, Utrecht University, Heidelberglaan 2, 3572 TC Utrecht (Netherlands)

2017-05-15

Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship between climate change adaptation and environmental impact assessment, and the degree to which environmental impacts are included in climate change adaptation theory and practice. Our literature review showed that technical, social and economic perspectives on climate change adaptation receive much more attention than the environmental perspective. The scarce interest on the environmental impacts of adaptation may be attributed to (1) an excessive sectoral approach, with dominance of non-environmental perspectives, (2) greater interest in mitigation and direct climate change impacts rather than in adaptation impacts, (3) a tendency to consider adaptation as inherently good, and (4) subjective/preconceived notions on which measures are good or bad, without a comprehensive assessment. Environmental Assessment (EA) has a long established history as an effective tool to include environment into decision-making, although it does not yet guarantee a proper assessment of adaptation, because it is still possible to postpone or even circumvent the processes of assessing the impacts of climate adaptation. Our results suggest that there is a need to address adaptation proactively by including it in EA, to update current policy frameworks, and to demand robust and reliable evaluation of alternatives. Only through the full EA of adaptation measures can we improve our understanding of the primary and secondary impacts of adaptation to global environmental change. - Highlights: • Climate change adaptation may have undesirable environmental impacts. • The impacts of adaptation are yet poorly analysed in the literature. • There is an excessive sectoral approach to adaptation, mainly

Environmental impacts of climate change adaptation

International Nuclear Information System (INIS)

Enríquez-de-Salamanca, Álvaro; Díaz-Sierra, Rubén; Martín-Aranda, Rosa M.; Santos, Maria J.

2017-01-01

Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship between climate change adaptation and environmental impact assessment, and the degree to which environmental impacts are included in climate change adaptation theory and practice. Our literature review showed that technical, social and economic perspectives on climate change adaptation receive much more attention than the environmental perspective. The scarce interest on the environmental impacts of adaptation may be attributed to (1) an excessive sectoral approach, with dominance of non-environmental perspectives, (2) greater interest in mitigation and direct climate change impacts rather than in adaptation impacts, (3) a tendency to consider adaptation as inherently good, and (4) subjective/preconceived notions on which measures are good or bad, without a comprehensive assessment. Environmental Assessment (EA) has a long established history as an effective tool to include environment into decision-making, although it does not yet guarantee a proper assessment of adaptation, because it is still possible to postpone or even circumvent the processes of assessing the impacts of climate adaptation. Our results suggest that there is a need to address adaptation proactively by including it in EA, to update current policy frameworks, and to demand robust and reliable evaluation of alternatives. Only through the full EA of adaptation measures can we improve our understanding of the primary and secondary impacts of adaptation to global environmental change. - Highlights: • Climate change adaptation may have undesirable environmental impacts. • The impacts of adaptation are yet poorly analysed in the literature. • There is an excessive sectoral approach to adaptation, mainly

Concept for integrated environmental monitoring. Scientific approach

Energy Technology Data Exchange (ETDEWEB)

Haber, W [comp.; Schoenthaler, K; Kerner, H F; Koeppel, J; Spandau, L

1998-09-01

Despite considerable expenditures for environmental protection and intensified efforts in the areas of environmental research and monitoring, environmental damage increasingly occurs, sometimes with global effects, largely due to the lack of early diagnosis. In the past few years various institutions have therefore demanded improvements in environmental monitoring. The Council of Experts on Environmental Issues (`Rat von Sachverstaendigen fuer Umweltfragen`, SRU), in particular, in its `Environmental Report` of 1987 and in its Special Report on `General Ecological Environmental Monitoring` (1990) presented far-reaching demands for a nationwide ecological early warning system which should integrate the various local, regional, national, and even global monitoring levels, and which should encompass an environmental monitoring of entire ecosystems at representative locations. This is aimed at creating the prerequisites for - detection of long-term gradual environmental change, - confirmation of refutation of initial assumptions regarding the causes of these environmental changes, - permitting decisions on preventive actions to stabilize or improve environmental conditions and - making it possible to assess the success of environmental protection policies. This report includes an abbreviated version and documentation of the conference on the `Concept for Integrated Environmental Monitoring` and the final report `Specification of the Concept for Integrated Environmental Monitoring from the Perspective of Nature Conservation`. (orig.)

Trade-offs between economic and environmental impacts of introducing legumes into cropping systems

Directory of Open Access Journals (Sweden)

Moritz eReckling

2016-05-01

Full Text Available Europe’s agriculture is highly specialized, dependent on external inputs and responsible for negative environmental impacts. Legume crops are grown on less than 2 % of the arable land and more than 70 % of the demand for protein feed supplement is imported from overseas. The integration of legumes into cropping systems has the potential to contribute to the transition to a more resource-efficient agriculture and reduce the current protein deficit. Legume crops influence the production of other crops in the rotation making it difficult to evaluate the overall agronomic effects of legumes in cropping systems. A novel assessment framework was developed and applied in five case study regions across Europe with the objective of evaluating trade-offs between economic and environmental effects of integrating legumes into cropping systems. Legumes resulted in positive and negative impacts when integrated into various cropping systems across the case studies. On average, cropping systems with legumes reduced nitrous oxide emissions by 18 % and 33 % and N fertilizer use by 24 % and 38 % in arable and forage systems, respectively, compared to systems without legumes. Nitrate leaching was similar with and without legumes in arable systems and reduced by 22 % in forage systems. However, grain legumes reduced gross margins in 3 of 5 regions. Forage legumes increased gross margins in 3 of 3 regions. Among the cropping systems with legumes, systems could be identified that had both relatively high economic returns and positive environmental impacts. Thus, increasing the cultivation of legumes could lead to economic competitive cropping systems and positive environmental impacts, but achieving this aim requires the development of novel management strategies informed by the involvement of advisors and farmers.

10 CFR 960.3-4 - Environmental impacts.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent practicable...

32 CFR 989.16 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Environmental impact statement. 989.16 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain classes of environmental impacts normally require preparation of an EIS (40 CFR 1501.4). These include...

22 CFR 216.7 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Environmental impact statements. 216.7 Section... Environmental impact statements. (a) Applicability. An Environmental Impact Statement shall be prepared when... Environmental Impact Statement relating to paragraph (a)(2) of this section shall comply with the CEQ...

ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

African Journals Online (AJOL)

protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

49 CFR 266.19 - Environmental impact.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Environmental impact. 266.19 Section 266.19... TRANSPORTATION ACT § 266.19 Environmental impact. (a) General. The Administrator has determined that providing..., or other significant adverse environmental impact on any mode of transportation; (6) The action is...

The screening and scoping of Environmental Impact Assessment and Strategic Environmental Assessment of Carbon Capture and Storage in the Netherlands

International Nuclear Information System (INIS)

Koornneef, Joris; Faaij, Andre; Turkenburg, Wim

2008-01-01

The Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are procedural tools which have as goal to assess and evaluate possible environmental effects of, respectively, a proposed project or policy plan. The goal of this article is to explore possible bottlenecks in applying both the EIA and SEA procedures on Carbon Capture and Storage (CCS) activities in the Netherlands, as experience is currently minimal or lacking. In this study we focus mainly on the institutional and procedural aspects of the screening and scoping phases of both procedures. This is achieved by reviewing EIA and SEA procedures for analogue projects for the three distinctive process steps of a CCS project, namely the power plant with capture, the transport and finally the underground storage of the CO 2 . Additionally, EIA and SEA or similar procedures on CCS in other countries are reviewed and the legal framework for the Dutch EIA and SEA is studied. This article shows a concise overview of the EIA and SEA procedure in the Netherlands and the relation between both procedures. Based on our findings we have constructed a conceptual taxonomy for the scope of both procedures for CCS in the Netherlands. This taxonomy conceptualizes the possible integration of assessing the environmental impacts for tiered levels of decision making. This integration might be needed for first CCS projects as decisions on the strategic (spatial planning) level are currently absent for CCS in the Netherlands. Perpendicular to such integration is the integration of linked activities in the CCS chain and their alternatives, into one procedure. We argue that it would be beneficial to combine the separate EIA procedures for CCS activities into one procedure or at least provide close linkage between them. This issue should be carefully considered by regulators, competent authorities and project initiators in an early stage to avoid delaying legal procedures in the future. For the same reason

32 CFR 651.23 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Environmental impact statement. 651.23 Section...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Records and Documents § 651.23 Environmental impact statement. An Environmental Impact statement (EIS) is a detailed written statement required...

The introductory role of the nuclear energy in the environmental impact development studies

International Nuclear Information System (INIS)

Ha-Vinh Phuong.

1995-01-01

The nuclear installation regulatory process of authorization normally requires, in good safety practice that the safety analysis of a particular nuclear installation should go along with the environmental impact assessment (EIA). The organization and actions of a programme and inspections for environmental radioactivity are then requirements as conditions that should anticipate the licence authorization. The nuclear energy, in that case, plays an important role for the environment integration in the planning and decisions related to develop projects in ecologically sensible domains. In fact, environmental impact assessment concept was progressively introduced by an increasing number of national regulations to be applied in a large gamma of activities. The impact studies provides a contribution for the global environment management perception an the sustainable economical development interest. 2 tabs

Optimization of a Distillation Unit In Terms of Potential Environmental Impact and Economics

International Nuclear Information System (INIS)

Alhassan Salami Tijani; Ramzan, N.

2013-01-01

Process energy integration and continuous improvement of process technology are increasing issues to ensure profitability of chemical productions. These objectives are increasingly important due to long-term environmental impact of energy degradation, such as resource depletion, emissions and the release of waste heat. The earlier energy conservation, process economics and environmental aspects are integrated into the process development, the easier and less expensive it is to improve the process design. In this work different distillation process design alternatives have been considered with respect to evaluations of process economics and potential environmental impacts. Optimum design alternatives are analyzed related to these objectives. A multi-criteria decision making technique such as (Analytic Hierarchy Process) AHP is applied for ranking the alternatives. This method reveals that the heat pump distillation unit which has the highest score of 52 % is the best alternative when compare with base case. In terms of the effluent streams the base case has a less potential environmental impact (PEI) compared with heat pump. The lower total PEI/ kg (7.45E-01) of the base case illustrates that the material utilization efficiency of the base case is better than the heat pump whose PEI/ kg is 8.14E-01. (author)

Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final

Energy Technology Data Exchange (ETDEWEB)

None

1999-02-01

This Final Environmental Impact Statement and Environmental Impact Report (Final EIS/EIR) has been prepared to meet the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). The Proposed Action includes the construction, operation, and decommissioning of a 48 megawatt (gross) geothermal power plant with ancillary facilities (10-12 production well pads and 3-5 injection well pads, production and injection pipelines), access roads, and a 230-kilovolt (kV) transmission line in the Modoc National Forest in Siskiyou County, California. Alternative locations for the power plant site within a reasonable distance of the middle of the wellfield were determined to be technically feasible. Three power plant site alternatives are evaluated in the Final EIS/EIR.

An Integrated Approach to Evaluating the Environmental Impact Following a Radiological Dispersal Event

National Research Council Canada - National Science Library

Smith, David A

2006-01-01

.... A terrorist act which could negatively impact both the ecology and human health is an ideal motivation for integration of the two approaches since the assessment must be done quickly and funds...

Lessons learned and new challenges for integrated assessment under the National Environmental Policy Act

Energy Technology Data Exchange (ETDEWEB)

Carnes, S.A.; Reed, R.M.

1995-12-31

One of the first government-sponsored demands for integrated assessment to support decision making in the United States is embodied in the National Environmental Policy Act of 1969 (NEPA). Over the past 25 years, Oak Ridge National Laboratory (ORNL) has supported federal agencies` in evaluating health and environmental impacts as required by NEPA. Many of ORNL`s efforts have focused on complex, programmatic assessments that break new ground and require and integrate expertise from a wide range of technical disciplines. Examples of ORNL projects that illustrate the use of integrated assessment approaches include environmental documentation for: (1) the Department of the Army`s Chemical Stockpile Disposal Program, (2) the Federal Energy Regulatory Commission`s licensing activities related to the Owens River Basin in eastern California and along a 500-mile reach of the upper Ohio River, and (3) the Nuclear Regulatory Commission`s decision regarding restart of the undamaged reactor (Unit 1) at Three Mile Island. Our discussion of these examples illustrates successful integrated assessment approaches and identifies new challenges facing integrated assessment activities.

Radiation environmental impact assessment of copper exploitation

International Nuclear Information System (INIS)

Fan Guang; Wen Zhijian

2010-01-01

The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

Using Choice Experiments to Assess Environmental Impacts of Dams in Portugal

Directory of Open Access Journals (Sweden)

Anabela Botelho

2015-08-01

Full Text Available Despite their well-known benefits in electricity production, dams are also responsible for some adverse environmental impacts affecting particularly the wellbeing of residents of the local communities. These environmental damages have not been included in the cost-benefit analysis of hydropower developments mainly because of the difficulty to determine their value. The prime objective of this paper is to measure the economic values of several environmental impacts due to the dams' activity in Portugal, using a discrete choice experiments approach. With the results of this research paper, we expect to contribute to a more efficient and thorough cost-benefit analysis within the complex process of deciding the optimal location of future dams to be built not only in Portugal, but elsewhere. The addition of this stage to the decision-making process allows the integration of economic, social and environmental dimensions, promoting a richer and more informed decision process.

An Integrated Computer-Aided Approach for Environmental Studies

DEFF Research Database (Denmark)

Gani, Rafiqul; Chen, Fei; Jaksland, Cecilia

1997-01-01

A general framework for an integrated computer-aided approach to solve process design, control, and environmental problems simultaneously is presented. Physicochemical properties and their relationships to the molecular structure play an important role in the proposed integrated approach. The sco...... and applicability of the integrated approach is highlighted through examples involving estimation of properties and environmental pollution prevention. The importance of mixture effects on some environmentally important properties is also demonstrated....

An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China

Energy Technology Data Exchange (ETDEWEB)

Li, Xiaodong, E-mail: eastdawn@tsinghua.edu.cn; Su, Shu, E-mail: sushuqh@163.com; Zhang, Zhihui, E-mail: zhzhg@tsinghua.edu.cn; Kong, Xiangqin, E-mail: kxlwq@126.com

2017-03-15

To comprehensively pre-evaluate the damages to both the environment and human health due to construction activities in China, this paper presents an integrated building environmental and health performance (EHP) assessment model based on the Building Environmental Performance Analysis System (BEPAS) and the Building Health Impact Analysis System (BHIAS) models and offers a new inventory data estimation method. The new model follows the life cycle assessment (LCA) framework and the inventory analysis step involves bill of quantity (BOQ) data collection, consumption data formation, and environmental profile transformation. The consumption data are derived from engineering drawings and quotas to conduct the assessment before construction for pre-evaluation. The new model classifies building impacts into three safeguard areas: ecosystems, natural resources and human health. Thus, this model considers environmental impacts as well as damage to human wellbeing. The monetization approach, distance-to-target method and panel method are considered as optional weighting approaches. Finally, nine residential buildings of different structural types are taken as case studies to test the operability of the integrated model through application. The results indicate that the new model can effectively pre-evaluate building EHP and the structure type significantly affects the performance of residential buildings.

An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China

International Nuclear Information System (INIS)

Li, Xiaodong; Su, Shu; Zhang, Zhihui; Kong, Xiangqin

2017-01-01

To comprehensively pre-evaluate the damages to both the environment and human health due to construction activities in China, this paper presents an integrated building environmental and health performance (EHP) assessment model based on the Building Environmental Performance Analysis System (BEPAS) and the Building Health Impact Analysis System (BHIAS) models and offers a new inventory data estimation method. The new model follows the life cycle assessment (LCA) framework and the inventory analysis step involves bill of quantity (BOQ) data collection, consumption data formation, and environmental profile transformation. The consumption data are derived from engineering drawings and quotas to conduct the assessment before construction for pre-evaluation. The new model classifies building impacts into three safeguard areas: ecosystems, natural resources and human health. Thus, this model considers environmental impacts as well as damage to human wellbeing. The monetization approach, distance-to-target method and panel method are considered as optional weighting approaches. Finally, nine residential buildings of different structural types are taken as case studies to test the operability of the integrated model through application. The results indicate that the new model can effectively pre-evaluate building EHP and the structure type significantly affects the performance of residential buildings.

40 CFR 1508.11 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Environmental impact statement. 1508.11 Section 1508.11 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY TERMINOLOGY AND INDEX § 1508.11 Environmental impact statement. Environmental impact statement means a detailed written...

7 CFR 1948.62 - Environmental impact requirements.

Science.gov (United States)

2010-01-01

... 7 Agriculture 13 2010-01-01 2009-01-01 true Environmental impact requirements. 1948.62 Section... Development Assistance Program § 1948.62 Environmental impact requirements. (a) The policies and regulations... studied for environmental impacts. (c) Boundaries shall define the area within which the environmental...

7 CFR 1794.61 - Environmental impact statement.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Environmental impact statement. 1794.61 Section 1794..., DEPARTMENT OF AGRICULTURE (CONTINUED) ENVIRONMENTAL POLICIES AND PROCEDURES Procedure for Environmental Impact Statements § 1794.61 Environmental impact statement. An EIS shall be prepared in accordance with...

Environmental impact report (draft)

Energy Technology Data Exchange (ETDEWEB)

1980-05-01

The three projects as proposed by Pacific Gas and Electric Company and the environmental analysis of the projects are discussed. Sections on the natural and social environments of the proposed projects and their surrounding areas consist of descriptions of the setting, discussions of the adverse and beneficial consequences of the project, and potential mitigation measures to reduce the effects of adverse impacts. The Environmental Impact Report includes discussions of unavoidable adverse effects, irreversible changes, long-term and cumulative impacts, growth-inducing effects, and feasible alternatives to the project. (MHR)

40 CFR 6.207 - Environmental impact statements.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Environmental impact statements. 6.207... ACTIONS EPA's NEPA Environmental Review Procedures § 6.207 Environmental impact statements. (a) The Responsible Official will prepare an environmental impact statement (EIS) (see 40 CFR 1508.11) for major...

Integrated environmental assessment of future energy scenarios based on economic equilibrium models

International Nuclear Information System (INIS)

Igos, E.; Rugani, B.; Rege, S.; Benetto, E.; Drouet, L.; Zachary, D.; Haas, T.

2014-01-01

The future evolution of energy supply technologies strongly depends on (and affects) the economic and environmental systems, due to the high dependency of this sector on the availability and cost of fossil fuels, especially on the small regional scale. This paper aims at presenting the modeling system and preliminary results of a research project conducted on the scale of Luxembourg to assess the environmental impact of future energy scenarios for the country, integrating outputs from partial and computable general equilibrium models within hybrid Life Cycle Assessment (LCA) frameworks. The general equilibrium model for Luxembourg, LUXGEM, is used to evaluate the economic impacts of policy decisions and other economic shocks over the time horizon 2006-2030. A techno-economic (partial equilibrium) model for Luxembourg, ETEM, is used instead to compute operation levels of various technologies to meet the demand for energy services at the least cost along the same timeline. The future energy demand and supply are made consistent by coupling ETEM with LUXGEM so as to have the same macro-economic variables and energy shares driving both models. The coupling results are then implemented within a set of Environmentally-Extended Input-Output (EE-IO) models in historical time series to test the feasibility of the integrated framework and then to assess the environmental impacts of the country. Accordingly, a dis-aggregated energy sector was built with the different ETEM technologies in the EE-IO to allow hybridization with Life Cycle Inventory (LCI) and enrich the process detail. The results show that the environmental impact slightly decreased overall from 2006 to 2009. Most of the impacts come from some imported commodities (natural gas, used to produce electricity, and metalliferous ores and metal scrap). The main energy production technology is the combined-cycle gas turbine plant 'Twinerg', representing almost 80% of the domestic electricity production in Luxembourg

21 CFR 25.52 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.52 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Public Participation and Notification of Environmental Documents § 25.52 Environmental impact statements. (a) If FDA determines that an EIS is necessary for an action involving...

Evaluating the relative environmental impact of countries.

Science.gov (United States)

Bradshaw, Corey J A; Giam, Xingli; Sodhi, Navjot S

2010-05-03

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total) measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

Evaluating the relative environmental impact of countries.

Directory of Open Access Journals (Sweden)

Corey J A Bradshaw

Full Text Available Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional and 171 (absolute had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened. Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in

Evaluating the Relative Environmental Impact of Countries

Science.gov (United States)

Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot S.

2010-01-01

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ‘models’ can be identified. We provide novel metrics of country-specific environmental impact ranks – one proportional to total resource availability per country and an absolute (total) measure of impact – that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

Do single-use medical devices containing biopolymers reduce the environmental impacts of surgical procedures compared with their plastic equivalents?

Science.gov (United States)

Unger, Scott R; Hottle, Troy A; Hobbs, Shakira R; Thiel, Cassandra L; Campion, Nicole; Bilec, Melissa M; Landis, Amy E

2017-01-01

Background While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy. Methods A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women's Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is a 360-bed teaching hospital, which performs approximately 1400 hysterectomies annually. Results There are life cycle environmental impact tradeoffs when substituting biopolymers for petroplastics in procedures such as hysterectomies. The substitution of biopolymers for petroleum-based plastics increased smog-related impacts by approximately 900% for laparoscopic and robotic hysterectomies, and increased ozone depletion-related impacts by approximately 125% for laparoscopic and robotic hysterectomies. Conversely, biopolymers reduced life cycle human health impacts, acidification and cumulative energy demand for the four hysterectomy procedures. The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects. However, the significant agricultural inputs associated with manufacturing biopolymers exacerbate environmental impacts of products and devices made using biopolymers. Conclusions The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects; however, the significant agricultural inputs associated

76 FR 21345 - Environmental Impacts Statements;

Science.gov (United States)

2011-04-15

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8996-4] Environmental Impacts Statements; Notice of Availability Responsible Agency: Office of Federal Activities, General Information (202) 564-1399 or http://www.epa.gov/compliance/nepa/ Weekly receipt of Environmental Impact Statements Filed 04/04/2011 Through 04...

78 FR 48672 - Environmental Impacts Statements;

Science.gov (United States)

2013-08-09

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9010-5] Environmental Impacts Statements; Notice of Availability Responsible Agency: Office of Federal Activities, General Information (202) 564-7146 or http://www.epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 07/29/2013 Through...

76 FR 55703 - Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings...

Science.gov (United States)

2011-09-08

..., and physical and cyber security systems. The new JOC also must meet State essential service criteria... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings for the Joint Operations Center Relocation Project...

23 CFR 771.125 - Final environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Final environmental impact statements. 771.125 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.125 Final environmental impact statements. (a)(1..., economic, or environmental impacts of the action may need to be more fully explored; (iii) the impacts of...

IMPACTS OF SAFETY and QUALITY IN ENVIRONMENTAL RESTORATION AT HANFORD

International Nuclear Information System (INIS)

PREVETTE, S.S.

2004-01-01

The aim of this paper is to demonstrate the integration of safety methodology, quality tools, leadership, and teamwork at Hanford and their significant positive impact on safe performance of work. Control charts, Pareto Charts, Dr. W. Edward Deming's Red Bead Experiment, and Dr. Deming's System of Profound Knowledge have been the principal tools and theory of an integrated management system. Coupled with involved leadership and teamwork they have led to significant improvements in worker safety and protection, and environmental restoration at one of the nation's largest nuclear cleanup sites

Improving environmental impact and cost assessment for supplier evaluation

Science.gov (United States)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Using smartphone technology to reduce health impacts from atmospheric environmental hazards

Science.gov (United States)

Johnston, F. H.; Wheeler, A. J.; Williamson, G. J.; Campbell, S. L.; Jones, P. J.; Koolhof, I. S.; Lucani, C.; Cooling, N. B.; Bowman, D. M. J. S.

2018-04-01

Background: Global environmental change is exacerbating human vulnerability to adverse atmospheric conditions including air pollution, aeroallergens such as pollen, and extreme weather events. Public information and advisories are a central component of responses to mitigate the human impacts of environmental hazards. Digital technologies are emerging as a means of providing personalised, timely and accessible warnings. Method: We describe AirRater, an integrated online platform that combines symptom surveillance, environmental monitoring, and notifications of changing environmental conditions via a free smartphone app. It was developed and launched in Tasmania, Australia (population 510 000), with the aim of reducing health impacts and improving quality of life in people with conditions such as asthma and allergic rhinitis. We present environmental data, user uptake and results from three online evaluation surveys conducted during the first 22 months of operation, from October 2015 through August 2017. Results: There were 3,443 downloads of the app from all regions of Tasmania. Of the 1,959 individuals who registered, 79% reported having either asthma or allergic rhinitis. Downloads increased during adverse environmental conditions and following publicity. Symptom reports per active user were highest during spring (72%), lowest in autumn (37%) and spiked during periods of reduced air quality. In response to online surveys, most users reported that the app was useful and had improved their understanding of how environmental conditions affect their health, and in some cases had prompted action such as the timely use of medication. Conclusion: Active engagement and consistent positive feedback from users demonstrates the potential for considerable individual, clinical and wider public health benefits from integrated and personalised monitoring systems such as AirRater. The perceived health benefits require objective verification, and such systems need to address

Social determinants and lifestyles: integrating environmental and public health perspectives.

Science.gov (United States)

Graham, H; White, P C L

2016-12-01

Industrialization and urbanization have been associated with an epidemiological transition, from communicable to non-communicable disease, and a geological transition that is moving the planet beyond the stable Holocene epoch in which human societies have prospered. The lifestyles of high-income countries are major drivers of these twin processes. Our objective is to highlight the common causes of chronic disease and environmental change and, thereby, contribute to shared perspectives across public health and the environment. Integrative reviews focused on social determinants and lifestyles as two 'bridging' concepts between the fields of public health and environmental sustainability. We drew on established frameworks to consider the position of the natural environment within social determinants of health (SDH) frameworks and the position of social determinants within environmental frameworks. We drew on evidence on lifestyle factors central to both public health and environmental change (mobility- and diet-related factors). We investigated how public health's focus on individual behaviour can be enriched by environmental perspectives that give attention to household consumption practices. While SDH frameworks can incorporate the biophysical environment, their causal structure positions it as a determinant and one largely separate from the social factors that shape it. Environmental frameworks are more likely to represent the environment and its ecosystems as socially determined. A few frameworks also include human health as an outcome, providing the basis for a combined public health/environmental sustainability framework. Environmental analyses of household impacts broaden public health's concern with individual risk behaviours, pointing to the more damaging lifestyles of high-income households. The conditions for health are being undermined by rapid environmental change. There is scope for frameworks reaching across public health and environmental

75 FR 8988 - Environmental Impact Statements; Availability

Science.gov (United States)

2010-02-26

... DEPARTMENT OF THE INTERIOR Environmental Impact Statements; Availability AGENCY: National Park Service. ACTION: Notice of availability for the Record of Decision on the Final Environmental Impact...) for the final Environmental Impact Statement (EIS) for the disposition of the Bureau of Mines property...

7 CFR 1955.136 - Environmental Assessment (EA) and Environmental Impact Statement (EIS).

Science.gov (United States)

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Environmental Assessment (EA) and Environmental Impact... Disposal of Inventory Property General § 1955.136 Environmental Assessment (EA) and Environmental Impact Statement (EIS). (a) Prior to a final decision on some disposal actions, an environmental assessment must be...

Integration of artificial intelligence methods and life cycle assessment to predict energy output and environmental impacts of paddy production.

Science.gov (United States)

Nabavi-Pelesaraei, Ashkan; Rafiee, Shahin; Mohtasebi, Seyed Saeid; Hosseinzadeh-Bandbafha, Homa; Chau, Kwok-Wing

2018-08-01

Prediction of agricultural energy output and environmental impacts play important role in energy management and conservation of environment as it can help us to evaluate agricultural energy efficiency, conduct crops production system commissioning, and detect and diagnose faults of crop production system. Agricultural energy output and environmental impacts can be readily predicted by artificial intelligence (AI), owing to the ease of use and adaptability to seek optimal solutions in a rapid manner as well as the use of historical data to predict future agricultural energy use pattern under constraints. This paper conducts energy output and environmental impact prediction of paddy production in Guilan province, Iran based on two AI methods, artificial neural networks (ANNs), and adaptive neuro fuzzy inference system (ANFIS). The amounts of energy input and output are 51,585.61MJkg -1 and 66,112.94MJkg -1 , respectively, in paddy production. Life Cycle Assessment (LCA) is used to evaluate environmental impacts of paddy production. Results show that, in paddy production, in-farm emission is a hotspot in global warming, acidification and eutrophication impact categories. ANN model with 12-6-8-1 structure is selected as the best one for predicting energy output. The correlation coefficient (R) varies from 0.524 to 0.999 in training for energy input and environmental impacts in ANN models. ANFIS model is developed based on a hybrid learning algorithm, with R for predicting output energy being 0.860 and, for environmental impacts, varying from 0.944 to 0.997. Results indicate that the multi-level ANFIS is a useful tool to managers for large-scale planning in forecasting energy output and environmental indices of agricultural production systems owing to its higher speed of computation processes compared to ANN model, despite ANN's higher accuracy. Copyright © 2018 Elsevier B.V. All rights reserved.

Integrated environmental protection obligations under European law, survey analysis of Austrian legislation

International Nuclear Information System (INIS)

Berthaler, W.

2001-05-01

This work focuses on legal instruments serving integrated environmental protection, especially with respect to administrative procedures concerning plant permits, and their inhorent limits. Initially, the legal and scientific approach pursued under the notion of 'integrated environmental protection' and 'environmental impact assessment' is examined and clarified in chapter A. Based thereon, chapter B deals with the obligations resulting from the EIA-Directive and - compared therewith - from the IPPC-Directive with regard to procedures for plant permits. Further, Austria's delay in fully transposing these directives is examined. When dealing with the constitutional basis for transposing the EIA- and IPPC-D into Austrian administrative law (chapter C), the inherent limits of some competence of legislation are discovered to be too narrow to ensure full compliance with EC law; only with regard to EIA, legistation is based on sound constitutional ground. The second part of the work is devoted to three areas of discussion on EIA- and IPPC-procedures under Austrian law: the scope of their applicability (chapter D), the problems of integrated evaluation and the limits of ecological expertise (chapter E) and aspects of public participation (chapter F). The study is concluded by a summary of the main results (chapter G). (author)

Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services

DEFF Research Database (Denmark)

Gilioli, G.; Schrader, G.; Baker, R.H.A.

2014-01-01

and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest...... Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive......The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose...

Quantifying the environmental impact of an integrated human/industrial-natural system using life cycle assessment; a case study on a forest and wood processing chain.

Science.gov (United States)

Schaubroeck, Thomas; Alvarenga, Rodrigo A F; Verheyen, Kris; Muys, Bart; Dewulf, Jo

2013-01-01

Life Cycle Assessment (LCA) is a tool to assess the environmental sustainability of a product; it quantifies the environmental impact of a product's life cycle. In conventional LCAs, the boundaries of a product's life cycle are limited to the human/industrial system, the technosphere. Ecosystems, which provide resources to and take up emissions from the technosphere, are not included in those boundaries. However, similar to the technosphere, ecosystems also have an impact on their (surrounding) environment through their resource usage (e.g., nutrients) and emissions (e.g., CH4). We therefore propose a LCA framework to assess the impact of integrated Techno-Ecological Systems (TES), comprising relevant ecosystems and the technosphere. In our framework, ecosystems are accounted for in the same manner as technosphere compartments. Also, the remediating effect of uptake of pollutants, an ecosystem service, is considered. A case study was performed on a TES of sawn timber production encompassing wood growth in an intensively managed forest ecosystem and further industrial processing. Results show that the managed forest accounted for almost all resource usage and biodiversity loss through land occupation but also for a remediating effect on human health, mostly via capture of airborne fine particles. These findings illustrate the potential relevance of including ecosystems in the product's life cycle of a LCA, though further research is needed to better quantify the environmental impact of TES.

47 CFR 1.1314 - Environmental impact statements (EISs).

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Environmental impact statements (EISs). 1.1314... Procedures Implementing the National Environmental Policy Act of 1969 § 1.1314 Environmental impact statements (EISs). (a) Draft Environmental Impact Statements (DEISs) (§ 1.1315) and Final Environmental...

Evaluation of environmental impacts during chemical mechanical polishing (CMP) for sustainable manufacturing

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyun Seop; Park, Sun Joon; Jeong, Hae Do [Pusan National University, Busan (Korea, Republic of)

2013-02-15

Reducing energy consumption has become a critical issue in manufacturing. The semiconductor industry in particular is confronted with environmental regulations on pollution associated with electric energy, chemical, and ultrapure water (UPW) consumptions. This paper presents the results of an evaluation of the environmental impacts during chemical mechanical polishing (CMP), a key process for planarization of dielectrics and metal films in ultra-large-scale integrated circuits. The steps in the CMP process are idling, conditioning, wetting, wafer loading/unloading, head dropping, polishing, and rinsing. The electric energy, CMP slurry, and UPW consumptions associated with the process and their impacts on global warming are evaluated from an environmental standpoint. The estimates of electric energy, slurry, and UPW consumptions as well as the associated greenhouse gas emissions presented in this paper will provide a technical aid for reducing the environmental burden associated with electricity consumption during the CMP process.

The regional environmental impact of biomass production

International Nuclear Information System (INIS)

Graham, R.L.

1994-01-01

The objective of this paper is to present a broad overview of the potential environmental impacts of biomass energy from energy crops. The subject is complex because the environmental impact of using biomass for energy must be considered in the context of alternative energy options while the environmental impact of producing biomass from energy crops must be considered in the context of the alternative land-uses. Using biomass-derived energy can reduce greenhouse gas emissions or increase them; growing biomass energy crops can enhance soil fertility or degrade it. Without knowing the context of the biomass energy, one can say little about its specific environmental impacts. The primary focus of this paper is an evaluation of the environmental impacts of growing energy crops. I present an approach for quantitatively evaluating the potential environmental impact of growing energy crops at a regional scale that accounts for the environmental and economic context of the crops. However, to set the stage for this discussion, I begin by comparing the environmental advantages and disadvantages of biomass-derived energy relative to other energy alternatives such as coal, hydropower, nuclear power, oil/gasoline, natural gas and photovoltaics

Assigment of environmental aspect and impacts

Directory of Open Access Journals (Sweden)

Hanzelová Marcela

2001-12-01

Full Text Available Environmental management system (EMS is a part of the management system that includes the organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy. The EMS provides the order and consistency for organizations to adress environmental cocerns through the allocation of resources, assignment of responsibilities, and the ongoing evaluation of practices, procedures and processes. The ISO 14001 requires the implementation of the EMS in accordance with defined, internationally recognized standards. The ISO standard specifies requirements for establishing an environmental policy, determining environmental aspects & impacts of products (activities services, planning environmental objectives and measurable targets, implementation & operation of programs to meet objectives and targets, checking &corrective action, and management review. The Environmental aspect is an element of organization’s activities, product or services that can interact with the environment. A significant environmental aspect is that with a significant environmental impact. The environmental impact is any change to the environment, whether adverse or beneficial wholly or partially resulting from an oranization’s activities, products or services.

39 CFR 775.11 - Environmental impact statements.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Environmental impact statements. 775.11 Section... POLICY ACT PROCEDURES § 775.11 Environmental impact statements. (a) Determining scope. Before an environmental impact statement is prepared, the following procedures must be followed to determine what issues...

Environmental Impact Statement. March 2011. Interim storage, encapsulation and final disposal of spent nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

2011-07-01

An Environmental Impact Statement (EIS) shall be prepared and submitted along with applications for permissibility and a licence under the Environmental Code and a licence under the Nuclear Activities Act for new nuclear facilities. This Environmental Impact Statement has been prepared by Svensk Kaernbraenslehantering AB (the Swedish Nuclear Fuel and Waste Management Co, SKB) to be included in the licence applications for continued operation of Clab (central interim storage facility for spent nuclear fuel) in Simpevarp in Oskarshamn Municipality and construction and operation of facilities for encapsulation (integrated with Clab) and final disposal of spent nuclear fuel in Forsmark in Oesthammar Municipality

Environmental Impact Statement. March 2011. Interim storage, encapsulation and final disposal of spent nuclear fuel

International Nuclear Information System (INIS)

2011-01-01

An Environmental Impact Statement (EIS) shall be prepared and submitted along with applications for permissibility and a licence under the Environmental Code and a licence under the Nuclear Activities Act for new nuclear facilities. This Environmental Impact Statement has been prepared by Svensk Kaernbraenslehantering AB (the Swedish Nuclear Fuel and Waste Management Co, SKB) to be included in the licence applications for continued operation of Clab (central interim storage facility for spent nuclear fuel) in Simpevarp in Oskarshamn Municipality and construction and operation of facilities for encapsulation (integrated with Clab) and final disposal of spent nuclear fuel in Forsmark in Oesthammar Municipality

Underwater noise modelling for environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Farcas, Adrian [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom); Thompson, Paul M. [Lighthouse Field Station, Institute of Biological and Environmental Sciences, University of Aberdeen, Cromarty IV11 8YL (United Kingdom); Merchant, Nathan D., E-mail: nathan.merchant@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom)

2016-02-15

Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

Underwater noise modelling for environmental impact assessment

International Nuclear Information System (INIS)

Farcas, Adrian; Thompson, Paul M.; Merchant, Nathan D.

2016-01-01

Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

16 CFR 1021.14 - Environmental impact statement.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Environmental impact statement. 1021.14 Section 1021.14 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ENVIRONMENTAL REVIEW Contents of Environmental Review Documents § 1021.14 Environmental impact statement. (a) Draft and final...

76 FR 381 - Notice of Availability of the Draft Environmental Impact Statement/Draft Environmental Impact...

Science.gov (United States)

2011-01-04

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Draft Environmental Impact Statement (EIS), and Draft Environmental Impact Report (EIR) as a joint environmental analysis document for the Iberdrola Renewable/Pacific Wind Development Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the opening of the comment period on the Draft EIS/EIR.

Beyond Public Particpation: The disjuncture between South Africa's Environmental Impact Assessment (EIA Law and Sustainable Development

Directory of Open Access Journals (Sweden)

T Murombo

2008-10-01

Full Text Available One of the key strategies for achieving sustainable development is the use of the process of evaluating the potential environmental impacts of development activities. The procedure of environmental impact assessment (EIA implements the principle of integration which lies at the core of the concept of sustainable development by providing a process through which potential social, economic and environmental impacts of activities are scrutinised and planned for. Sustainable development may not be achieved without sustained and legally mandated efforts to ensure that development planning is participatory. The processes of public participation play a crucial role in ensuring the integration of the socio-economic impacts of a project into the environmental decision-making processes. Public participation is not the only process, nor does the process always ensure the achievement of sustainable development. Nevertheless, decisions that engage the public have the propensity to lead to sustainable development. The public participation provisions in South Africa’s EIA regulations promulgated under the National Environmental Management Act 107 of 1998 show a disjuncture between the idea of public participation and the notion of sustainable development. The provisions do not create a framework for informed participation and leave a wide discretion to environmental assessment practitioners (EAPs regarding the form which participation should assume. In order for environmental law, specifically EIA laws, to be effective as tools to promote sustainable development the laws must, among other things, provide for effective public participation. The judiciary must also aid in the process by giving content to the legal provisions on public participation in the EIA process.

78 FR 11593 - Environmental Impact and Related Procedures

Science.gov (United States)

2013-02-19

... (EA) or environmental impact statement (EIS) under 23 CFR part 771, the repair or reconstruction of... unusual circumstances include significant environmental impacts, substantial controversy on environmental... the action normally has significant environmental impacts either individually or cumulatively and may...

10 CFR 503.13 - Environmental impact analysis.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impact analysis. 503.13 Section 503.13... Exemptions § 503.13 Environmental impact analysis. In order to enable OFE to comply with NEPA, a petitioner..., and land resources; (3) Direct and indirect environmental impacts of the proposed action including...

76 FR 57720 - Notice of Intent To Prepare an Environmental Impact Statement/Overseas Environmental Impact...

Science.gov (United States)

2011-09-16

...The Department of the Navy published a document in the Federal Register (76 FR 174) on September 8, 2011, concerning public scoping meetings to support the development of an Environmental Impact Statement/Overseas Environmental Impact Statement for the Mariana Islands Training and Testing Study Area. The document contained an incorrect scoping date.

Towards a methodology to formulate sustainable diets for livestock: accounting for environmental impact in diet formulation.

Science.gov (United States)

Mackenzie, S G; Leinonen, I; Ferguson, N; Kyriazakis, I

2016-05-28

The objective of this study was to develop a novel methodology that enables pig diets to be formulated explicitly for environmental impact objectives using a Life Cycle Assessment (LCA) approach. To achieve this, the following methodological issues had to be addressed: (1) account for environmental impacts caused by both ingredient choice and nutrient excretion, (2) formulate diets for multiple environmental impact objectives and (3) allow flexibility to identify the optimal nutritional composition for each environmental impact objective. An LCA model based on Canadian pig farms was integrated into a diet formulation tool to compare the use of different ingredients in Eastern and Western Canada. By allowing the feed energy content to vary, it was possible to identify the optimum energy density for different environmental impact objectives, while accounting for the expected effect of energy density on feed intake. A least-cost diet was compared with diets formulated to minimise the following objectives: non-renewable resource use, acidification potential, eutrophication potential, global warming potential and a combined environmental impact score (using these four categories). The resulting environmental impacts were compared using parallel Monte Carlo simulations to account for shared uncertainty. When optimising diets to minimise a single environmental impact category, reductions in the said category were observed in all cases. However, this was at the expense of increasing the impact in other categories and higher dietary costs. The methodology can identify nutritional strategies to minimise environmental impacts, such as increasing the nutritional density of the diets, compared with the least-cost formulation.

Methods and techniques for prediction of environmental impact

International Nuclear Information System (INIS)

1992-04-01

Environmental impact assessment (EIA) is the procedure that helps decision makers understand the environmental implications of their decisions. The prediction of environmental effects or impact is an extremely important part of the EIA procedure and improvements in existing capabilities are needed. Considerable attention is paid within environmental impact assessment and in handbooks on EIA to methods for identifying and evaluating environmental impacts. However, little attention is given to the issue distribution of information on impact prediction methods. The quantitative or qualitative methods for the prediction of environmental impacts appear to be the two basic approaches for incorporating environmental concerns into the decision-making process. Depending on the nature of the proposed activity and the environment likely to be affected, a combination of both quantitative and qualitative methods is used. Within environmental impact assessment, the accuracy of methods for the prediction of environmental impacts is of major importance while it provides for sound and well-balanced decision making. Pertinent and effective action to deal with the problems of environmental protection and the rational use of natural resources and sustainable development is only possible given objective methods and techniques for the prediction of environmental impact. Therefore, the Senior Advisers to ECE Governments on Environmental and Water Problems, decided to set up a task force, with the USSR as lead country, on methods and techniques for the prediction of environmental impacts in order to undertake a study to review and analyse existing methodological approaches and to elaborate recommendations to ECE Governments. The work of the task force was completed in 1990 and the resulting report, with all relevant background material, was approved by the Senior Advisers to ECE Governments on Environmental and Water Problems in 1991. The present report reflects the situation, state of

Environmental risk assessment of registered insecticides in Iran using Environmental Impact Quotient (EIQ index

Directory of Open Access Journals (Sweden)

S. Moinoddini

2016-05-01

Full Text Available In the last decades, pesticides have been used extensively, in order to control pests and plant diseases, but negative impacts of pesticides caused several environmental problems and put human health in danger. In order to decrease environmental hazards of pesticide, risk of pesticide application should be measured briefly and precisely. In this study environmental impacts of registered insecticides in Iran which applied in 2001-2002, 2003-2004, 2004-2005, are considered using environmental impact quotient (EIQ index. Results showed that among considered insecticides, Imidacloprid, Fipronil and Tiodicarb, potentially (EIQ were the most hazardous insecticides, respectively. Taking rate of application and active ingredient of insecticide in to account, environmental impact (practical toxicity per cultivated hectare (EIQ Field of each provinces were investigated. In this regard, among different province of Iran, Kerman, Mazandaran and Golestan were in danger more than the others, respectively. Besides, considering the amount of agricultural production in provinces, environmental impact per ton of production were calculated for each provinces which three northern provinces of Mazandaran, Golestan and Guilan, respectively endure the most environmental impact per ton of production. Eventually based on environmental impact quotient, results demonstrated that majority of environmental impacts of insecticide in Iran were due to inadequate knowledge and also overuse of a few number of insecticides. Therefore, by improving knowledge about environmental impact of pesticides and also developing environmental friendly and ecological based methods, negative environmental impacts of insecticides will be reduced significantly.

Integration of operational research and environmental management

NARCIS (Netherlands)

Bloemhof - Ruwaard, J.M.

1996-01-01

The subject of this thesis is the integration of Operational Research and Environmental Management. Both sciences play an important role in the research of environmental issues. Part I describes a framework for the interactions between Operational Research and Environmental Management.

Environmental impacts of food trade via resource use and greenhouse gas emissions

International Nuclear Information System (INIS)

Dalin, Carole; Rodríguez-Iturbe, Ignacio

2016-01-01

Agriculture will need to significantly intensify in the next decades to continue providing essential nutritive food to a growing global population. However, it can have harmful environmental impacts, due to the use of natural and synthetic resources and the emission of greenhouse gases, which alter the water, carbon and nitrogen cycles, and threaten the fertility, health and biodiversity of landscapes. Because of the spatial heterogeneity of resource productivity, farming practices, climate, and land and water availability, the environmental impact of producing food is highly dependent on its origin. For this reason, food trade can either increase or reduce the overall environmental impacts of agriculture, depending on whether or not the impact is greater in the exporting region. Here, we review current scientific understanding of the environmental impacts of food trade, focusing on water and land use, pollution and greenhouse gas emissions. In the case of water, these impacts are mainly beneficial. However, in the cases of pollution and greenhouse gas emissions, this conclusion is not as clear. Overall, there is an urgent need for a more comprehensive, integrated approach to estimate the global impacts of food trade on the environment. Second, research is needed to improve the evaluation of some key aspects of the relative value of each resource depending on the local and regional biophysical and socio–economic context. Finally, to enhance the impact of such evaluations and their applicability in decision-making, scenario analyses and accounting of key issues like deforestation and groundwater exhaustion will be required. (letter)

Environmental impacts of food trade via resource use and greenhouse gas emissions

Science.gov (United States)

Dalin, Carole; Rodríguez-Iturbe, Ignacio

2016-03-01

Agriculture will need to significantly intensify in the next decades to continue providing essential nutritive food to a growing global population. However, it can have harmful environmental impacts, due to the use of natural and synthetic resources and the emission of greenhouse gases, which alter the water, carbon and nitrogen cycles, and threaten the fertility, health and biodiversity of landscapes. Because of the spatial heterogeneity of resource productivity, farming practices, climate, and land and water availability, the environmental impact of producing food is highly dependent on its origin. For this reason, food trade can either increase or reduce the overall environmental impacts of agriculture, depending on whether or not the impact is greater in the exporting region. Here, we review current scientific understanding of the environmental impacts of food trade, focusing on water and land use, pollution and greenhouse gas emissions. In the case of water, these impacts are mainly beneficial. However, in the cases of pollution and greenhouse gas emissions, this conclusion is not as clear. Overall, there is an urgent need for a more comprehensive, integrated approach to estimate the global impacts of food trade on the environment. Second, research is needed to improve the evaluation of some key aspects of the relative value of each resource depending on the local and regional biophysical and socio-economic context. Finally, to enhance the impact of such evaluations and their applicability in decision-making, scenario analyses and accounting of key issues like deforestation and groundwater exhaustion will be required.

A new approach for environmental justice impact assessment

International Nuclear Information System (INIS)

Wilkinson, C.H.; Brumburgh, G.P.; Edmunds, T.A.; Kay, D.

1996-03-01

President Clinton's Executive Order 12898 calls for examination of disproportionately high and adverse impacts to minority and low-income communities. In addition to demographic mapping, environmental justice analyses should also include quantitative impact assessment to show presence or absence of disproportionate impacts. This study demonstrates use of a geographic information system (GIS) and a computer model. For this demonstration, a safety analysis report and a computer code were used to develop impact assessment data from a hypothetical facility accident producing a radiological airborne plume. The computer code modeled the plume, plotted dose contours, and provided latitude and longitude coordinates for transfer to the GIS. The GIS integrated and mapped the impact and demographic data toprovide a graphical representation of the plume with respect to the population. Impacts were then analyzed. The GIS was used to estimate the total dose to the exposed population under the plume, the dose to the low-income population under the plume, and the dose to the minority population under the plume. Impacts among the population groups were compared to determine whether a dispropotionate share of the impacts were borne by minority or low-income populations

Fuzzy Decision Analysis for Integrated Environmental Vulnerability Assessment of the Mid-Atlantic Region

Science.gov (United States)

Liem T. Tran; C. Gregory Knight; Robert V. O' Neill; Elizabeth R. Smith; Kurt H. Riitters; James D. Wickham

2002-01-01

A fuzzy decision analysis method for integrating ecological indicators was developed. This was a combination of a fuzzy ranking method and the analytic hierarchy process (AHP). The method was capable of ranking ecosystems in terms of environmental conditions and suggesting cumulative impacts across a large region. Using data on land cover, population, roads, streams,...

Project Orion, Environmental Control and Life Support System Integrated Studies

Science.gov (United States)

Russell, James F.; Lewis, John F.

2008-01-01

Orion is the next vehicle for human space travel. Humans will be sustained in space by the Orion subystem, environmental control and life support (ECLS). The ECLS concept at the subsystem level is outlined by function and technology. In the past two years, the interface definition with other subsystems has increased through different integrated studies. The paper presents the key requirements and discusses three recent studies (e.g., unpressurized cargo) along with the respective impacts on the ECLS design moving forward.

Environmental impact assessment: Process and implementation

International Nuclear Information System (INIS)

Chen, S.Y.; Tsai, S.Y.

1989-01-01

In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

Transportation risk assessment for the US Department of Energy Environmental Management Programmatic Environmental Impact Statement

International Nuclear Information System (INIS)

Chen, S.Y.; Monette, F.A.; Biwer, B.M.; Lazaro, M.A.; Hartmann, H.M.; Policastro, A.J.

1994-01-01

In its Programmatic Environmental Impact Statement (PEIS), the Office of Environmental Management (EM) of the US Department of Energy (DOE) is considering a broad range of alternatives for the future management of radioactive and hazardous waste at the facilities of the DOE complex. The alternatives involve facilities to be used for treatment, storage, and disposal of various wastes generated from DOE's environmental restoration activities and waste management operation. Included in the evaluation are six types of waste (five types of radioactive waste plus hazardous waste), 49 sites, and numerous cases associated with each different alternative for waste management. In general, the alternatives are evaluated independently for each type of waste and reflect decentralized, regionalized, and centralized approaches. Transportation of waste materials is an integral component of the EM PEIS alternatives for waste management. The estimated impact on human health that is associated with various waste transportation activities is an important element leading to a complete appraisal of the alternatives. The transportation risk assessment performed for the EM PEIS is designed to ensure -- through uniform and judicious selection of models, data, and assumptions -- that relative comparisons of risk among the various alternatives are meaningful and consistent

40 CFR 227.4 - Criteria for evaluating environmental impact.

Science.gov (United States)

2010-07-01

... impact. 227.4 Section 227.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN... Impact § 227.4 Criteria for evaluating environmental impact. This subpart B sets specific environmental... of direct environmental impact. ...

77 FR 68813 - Notice of Availability of the Draft Environmental Impact Statement and Environmental Impact...

Science.gov (United States)

2012-11-16

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA); the Federal Land Policy and Management Act of 1976, as amended; and the California Environmental Quality Act of 1970 (CEQA); the Bureau of Land Management (BLM) Bishop Field Office, Bishop, California; the United States Forest Service (USFS) Inyo National Forest; and the Great Basin Unified Air Pollution Control District (GBUAPCD) (a California state agency) have prepared a Draft Environmental Impact Statement (EIS)/Environmental Impact Report (EIR) for the proposed Casa Diablo IV Geothermal Development Project near the Town of Mammoth Lakes in Mono County, California. This notice announces the opening of the public comment period.

Environmental impact assessment of fish farm hatcheries ...

African Journals Online (AJOL)

Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

Environmental impact of high voltage aerial transmission lines

International Nuclear Information System (INIS)

Silva, R.P.; Mouallen, M.C.; Quintella, S.E.A.

1989-01-01

The identification of environmental impacts caused by the aerial transmission lines and the measures for reducing these impacts are discussed, considering the impact over the soil in different areas, biological effects caused by delayed exposure and visual impacts due to the line structures. A methodology for the impact evaluation and the aspects of the Environmental Impact Studies and Environmental Impact Report are also studied. (C.G.C.). 2 refs, 1 fig

Anaesthetic gases: environmental impact and alternatives

African Journals Online (AJOL)

Little consideration has been given to the environmental impact of anaesthetic gas .... our practice to select gases with a lower environmental impact is also ... is used as raw material for new anaesthetics. ... none in the pipeline.1. Conclusion.

Environmental impacts of renewable energy sources

International Nuclear Information System (INIS)

Abbasi, S.A.; Abbasi, N.

1997-01-01

The global attention has always been focused on the adverse environmental impacts of conventional energy sources. In contrast nonconventional energy sources, particularly the renewable ones, have enjoyed a clean image vis a vis environmental impacts. The only major exception to this general trend has been large hydropower projects; experience has taught that they can be disastrous for the environment. The belief now is that mini hydro and microhydro projects are harmless alternatives. But are renewable energy sources really as benign as is widely believed? The present essay addresses this question in the background of Lovin's classical paradigm which had postulated the hard (malignant) and soft (benign) energy concepts in the first place. It then critically evaluates the environmental impacts of major renewable energy sources. It then comes up with the broad conclusion that renewable energy sources are not the panacea they are popularly perceived to be; indeed in some cases their adverse environmental impacts can be as strongly negative as the impacts of conventional energy sources. The paper also dwells on the steps needed to utilize renewable energy sources without facing environmental backlashes of the type experienced from hydropower projects

Environmental Metabolic Footprinting (EMF) vs. half-life: a new and integrative proxy for the discrimination between control and pesticides exposed sediments in order to further characterise pesticides' environmental impact.

Science.gov (United States)

Salvia, Marie-Virginie; Ben Jrad, Amani; Raviglione, Delphine; Zhou, Yuxiang; Bertrand, Cédric

2017-06-28

Pesticides are regularly used for a variety of applications and are disseminated throughout the environment. These substances may have significant negative impacts. To date, the half-life, t 1/2 , was often used to study the fate of pesticides in environmental matrices (water, soil, sediment). However, this value gives limited information. First, it does not evaluate the formation of by-products, resulting in the need for additional experiments to be performed to evaluate biodegradation and biotransformation products. T 1/2 also fails to consider the chemical's impact on biodiversity. Resilience time, a new and integrative proxy, was recently proposed as an alternative to t 1/2 , with the potential to evaluate all the post-application effects of the chemical on the environment. The 'Environmental Metabolic Footprinting' (EMF) approach, giving an idea of the resilience time, was used to evaluate the impact of botanicals on soil. The goal is to optimise the EMF to study the impact of a microbial insecticide, the Bacillus thuringiensis israelensis (Bti), on sediment. The difficulty of this work lies in the commercial solution of Bti that is really complex, and this complexity yields chromatograms that are extremely difficult to interpret; t 1/2 cannot be used. No methodologies currently exist to monitor the impact of these compounds on the environment. We will test the EMF to determine if it is sensitive enough to tolerate such complex mixtures. A pure chemical insecticide, the α-cypermethrin, will be also studied. The article shows that the EMF is able to distinguish meta-metabolome differences between control and exposed (with Bti) sediments.

Floral pathway integrator gene expression mediates gradual transmission of environmental and endogenous cues to flowering time.

Science.gov (United States)

van Dijk, Aalt D J; Molenaar, Jaap

2017-01-01

The appropriate timing of flowering is crucial for the reproductive success of plants. Hence, intricate genetic networks integrate various environmental and endogenous cues such as temperature or hormonal statues. These signals integrate into a network of floral pathway integrator genes. At a quantitative level, it is currently unclear how the impact of genetic variation in signaling pathways on flowering time is mediated by floral pathway integrator genes. Here, using datasets available from literature, we connect Arabidopsis thaliana flowering time in genetic backgrounds varying in upstream signalling components with the expression levels of floral pathway integrator genes in these genetic backgrounds. Our modelling results indicate that flowering time depends in a quite linear way on expression levels of floral pathway integrator genes. This gradual, proportional response of flowering time to upstream changes enables a gradual adaptation to changing environmental factors such as temperature and light.

Floral pathway integrator gene expression mediates gradual transmission of environmental and endogenous cues to flowering time

Directory of Open Access Journals (Sweden)

Aalt D.J. van Dijk

2017-04-01

Full Text Available The appropriate timing of flowering is crucial for the reproductive success of plants. Hence, intricate genetic networks integrate various environmental and endogenous cues such as temperature or hormonal statues. These signals integrate into a network of floral pathway integrator genes. At a quantitative level, it is currently unclear how the impact of genetic variation in signaling pathways on flowering time is mediated by floral pathway integrator genes. Here, using datasets available from literature, we connect Arabidopsis thaliana flowering time in genetic backgrounds varying in upstream signalling components with the expression levels of floral pathway integrator genes in these genetic backgrounds. Our modelling results indicate that flowering time depends in a quite linear way on expression levels of floral pathway integrator genes. This gradual, proportional response of flowering time to upstream changes enables a gradual adaptation to changing environmental factors such as temperature and light.

Life Cycle Based Evaluation of Environmental and Economic Impacts of Agricultural Productions in the Mediterranean Area

Directory of Open Access Journals (Sweden)

Elena Tamburini

2015-03-01

Full Text Available In recent years, there has been an increasing interest in Life Cycle Assessment (LCA applied to estimate the cradle-to-grave environmental impact of agricultural products or processes. Furthermore, including in the analysis an economic evaluation, from the perspective of an integrated life cycle approach, appears nowadays as a fundamental improvement. In particular, Life Cycle Costing (LCC, is a method that could integrate financial data and cost information with metrics of life cycle approaches. In this study, LCA in conjunction with LCC methods were used, with the aim to evaluate the main cost drivers—environmental and economic—of five widely diffused and market-valued agricultural productions (organic tomato and pear, integrated wheat, apple and chicory and to combine the results in order to understand the long-term externalities impacts of agricultural productions. Data obtained in local assessment show a wide margin of improvement of resources management at farms level in the short-term, but also allow for the investigation of future effects of environmental impacts not expressed in product price on the market. Reaching a real sustainable model for agriculture could be a value added approach firstly for farmers, but also for all the people who live in rural areas or use agricultural products.

Advanced coal combustion technologies and their environmental impact

International Nuclear Information System (INIS)

Bozicevic, Maja; Feretic, Danilo; Tomsic, Zeljko

1997-01-01

Estimations of world energy reserves show that coal will remain the leading primary energy source for electricity production in the foreseeable future. In order to comply with ever stricter environmental regulations and to achieve efficient use of limited energy resources, advanced combustion technologies are being developed. The most promising are the pressurised fluidized bed combustion (PFBC) and the integrated gasification combined cycle (IGCC). By injecting sorbent in the furnace, PFBC removes more than 90 percent of SO 2 in flue gases without additional emission control device. In addition, due to lower combustion temperature, NO x emissions are around 90 percent lower than those from pulverised coal (PC) plant. IGCC plant performance is even more environmentally expectable and its high efficiency is a result of a combined cycle usage. Technical, economic and environmental characteristics of mentioned combustion technologies will be presented in this paper. Comparison of PFBC, IGCC and PC power plants economics and air impact will also be given. (Author)

Agro-environmental evaluation of vineyard management using organic farming and integrated plant production systems

OpenAIRE

FORGET, D.; LACOMBE, J.; DURAND, A.

2009-01-01

Organic farming is often considered to be the most environmentally-friendly crop management system, even if integrated production also aims at decreasing the impact of agriculture on the natural environment. In order to establish references for the agro-environmental evaluation of these two production systems in relation to grape growing, INRA carried out an initial study from 2001 to 2004 at the plot scale. This study focused on two grape varieties (Merlot N and Cabernet Sauvignon) in its Co...

23 CFR 771.123 - Draft environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Draft environmental impact statements. 771.123 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.123 Draft environmental impact statements. (a) A... significant impacts on the environment. When the applicant, after consultation with any project sponsor that...

Environmental impact of Yucca Mountain Repository

International Nuclear Information System (INIS)

Ahn, Joonhong

2005-01-01

Environmental impact of the Yucca Mountain Repository (YMR) has been quantitatively evaluated in terms of the radiotoxicity of transuranic (TRU) and fission-product radionuclides existing in the environment after released from failed packages. Inventory abstraction has been made based on the data published in Final Environmental Impact Statement published by US DOE. Mathematical model and computation code have been developed based on analytical solutions. Environmental impact from the commercial spent nuclear fuel (CSNF) packages is about 90% of the total impact including the contribution from defense waste (DW) packages. Impacts due to isotopes of Cm, Am, Pu and Np, and their decay daughters are dominant, compared with those from fission-product nuclides. Numerical results show that reduction of the TRU nuclides by a factor of 100 makes the impact from CSNF smaller than that from DW. (author)

Environmental impact assessment screening tool

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

Environmental impact assessment screening tool

International Nuclear Information System (INIS)

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final: Comments and Responses to Comments

Energy Technology Data Exchange (ETDEWEB)

None

1999-02-01

This document is the Comments and Responses to Comments volume of the Final Environmental Impact Statement and Environmental Impact Report prepared for the proposed Telephone Flat Geothermal Development Project (Final EIS/EIR). This volume of the Final EIS/EIR provides copies of the written comments received on the Draft EIS/EIR and the leady agency responses to those comments in conformance with the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA).

Development of an integrated system for evaluation of environmental radiologic impact during emergency situations

International Nuclear Information System (INIS)

Conti, Luiz Fernando de Carvalho

2002-03-01

An integrated system for performing environmental dose assessment after nuclear or radiological emergencies has been developed, as a tool for decision making process. The system includes databases such as those describing radionuclide decay, dose conversion factors for several environmental geometries and radionuclides with emitted radiation and energies. It includes several models for predicting environmental behaviour at the short,medium and long terms, for both rural and urban environments and is flexible enough for simulating the exposure of members of the public due to small accidents involving individual sources up to large scale nuclear accidents with complex source terms to the environment. The model has been built in a way that can perform assessment of actual exposures or make forecasts for future exposure based on dynamic simulation of the fate of radionuclides in environmental and potential exposure pathways to members of the public, taking into account he kind of contaminated environment and the age groups of exposed persons. Input data may come from a predicted source term or information on environmental concentration based on dispersion models or on environmental measurements, including on line monitoring systems, environmental surveys, direct measurements by in situ gamma spectrometry or analysis of environmental samples. Outputs of the model are dose estimates to members of the public as a function of the exposure pathway, time after the contamination and age group, for different groups of members of the public and kind of use of the environment. Time dependent kerma rates in air and concentrations in environmental compartments such as soil and foodstuff are also available, including the simulation of the effect of protective measures, to support the decision making process. (author)

Sierra Pacific Power Company Alturas Transmission Line Project, Final Environmental Impact Report/Environmental Impact Statement. Volume 3: Appendices

International Nuclear Information System (INIS)

1995-11-01

Sierra Pacific Power Company has proposed the construction and operation of a 345,000 volt overhead electric power transmission line from Alturas, California to Reno, Nevada. This Environmental Impact Report/Environmental Impact Statement will assess the potential environmental impacts of the proposed project and alternatives. This report contains Appendices A--I which contain the following: glossary/abbreviations; scoping report; structure coordinate summary; air quality; biological resources; geology; noise; visual contrast rating forms; and cultural resources

Salt Lake City Area Integrated Projects Electric Power Marketing. Draft environmental impact statement: Volume 3, Appendix A

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Salt Lake City Area Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Green, Gunnison, Rio Grande, and Colorado rivers and on Deer and Plateau creeks in the states of Wyoming, Utah, Colorado, Arizona, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams;) are influenced by Western power scheduling and transmission decisions. The EIS alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Westerns firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this environmental impact statement (EIS) include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources.

Environmental impacts of energy utilization

International Nuclear Information System (INIS)

Prado, C.P.C. do; Orsini, C.M.Q.; Rodrigues, D.; Barolli, E.; Nogueira, F.R.; Bosco, F.A.R.; Tabacniks, M.H.; Artaxo Netto, P.E.

1981-04-01

A survey is done of the available data on the physical environmental impacts in Brazil, derived from energetic systems such as: petroleum, hydroelectricity, firewood, coal, ethanol, methanol and hydrogen. A critical evalution of these data is done with respect to the preservation of the environment. The necessity of studying the environmental impact of the utilization of ethanol, nuclear fuels and coal is stressed. (M.A.) [pt

Environmental impact assessment - a selected bibliography

International Nuclear Information System (INIS)

Lawson, W.J.

1989-01-01

This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

10 CFR 51.85 - Draft environmental impact statement-rulemaking.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-rulemaking. 51.85... Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.85 Draft environmental impact... Commission has determined to prepare an environmental impact statement. ...

Integrating Environmental Management of Asthma into Pediatric Health Care: What Worked and What Still Needs Improvement?

Science.gov (United States)

Roberts, James R; Newman, Nicholas; McCurdy, Leyla E; Chang, Jane S; Salas, Mauro A; Eskridge, Bernard; De Ybarrondo, Lisa; Sandel, Megan; Mazur, Lynnette; Karr, Catherine J

2016-12-01

The National Environmental Education Foundation (NEEF) launched an initiative in 2005 to integrate environmental management of asthma into pediatric health care. This study, a follow-up to a 2013 study, evaluated the program's impact and assessed training results by 5 new faculty champions. We surveyed attendees at training sessions to measure knowledge and the likelihood of asking about and managing environmental triggers of asthma. To conduct the program evaluation, a workshop was held with the faculty champions and NEEF staff in which we identified major program benefits, as well as challenges and suggestions for the future. Trainee baseline knowledge of environmental triggers was low, but they reported robust improvement in environmental triggers knowledge and intention to recommend environmental management. The program has a broad, national scope, reaching more than 12 000 physicians, health care providers, and students, and some faculty champions successfully integrated materials into health record. Program barriers and future endeavors were identified.

GIS as a vital tool for Environmental Impact Assessment and Mitigation

Science.gov (United States)

Gharehbaghi, Koorosh; Scott-Young, Christina

2018-03-01

Environmental Impact Assessment (EIA) is a course of action which provides information to various stakeholders such as planners and relevant authorities about the planned development and its subsequent effects of the environment and the immediate ambiances. Furthermore, the EIA and mitigation are the inclusive process of collecting, analyzing information and the determination of the application for development or construction approval, which could be accessible by the concerned communities and organizations. Although the set regulations of EIA and mitigation vary from jurisdictions, they are, however, very precise and need to be integrated with the specific geographical data. In addition, the Geographical Information System (GIS) is a software intended to encapsulate and present all types of physical, biological, environmental, ecological and geological information. Conversely, GIS is the integration of statistical analysis and information technology, and can also be further broken down into two different categories of; Topological Modelling and Map overlay. To ensure that the EIA and mitigation are receptive the GIS will provide the decisive apparatus. Using GIS not only improves the overall EIA and mitigation process, but also provides valuable mapping strategies, including holistic environmental system approach. Accordingly, the main objective of this paper is to discuss the importance of the GIS and Environmental Data integration progression, to further enhance the overall EIA and Mitigation processes.

Modelling of an industrial NGL-Recovery unit considering environmental and economic impacts

International Nuclear Information System (INIS)

Sharratt, P. N.; Hernandez-Enriquez, A.; Flores-Tlacuahuac, A.

2009-01-01

In this work, an integrated model is presented that identifies key areas in the operation of a cryogenic NGL-recovery unit. This methodology sets out to provide deep understanding of various interrelationship across multiple plant operating factors including reliability, which could be essential for substantial improvement of process performance. The integrated model has been developed to predict the economic and environmental impacts of a real cryogenic unit (600 MMCUF/D) during normal operation, and has been built in Aspen TM. (Author)

77 FR 14416 - Notice of Availability of a Final Environmental Impact Statement and Final Environmental Impact...

Science.gov (United States)

2012-03-09

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) has prepared a Proposed California Desert Conservation Area (CDCA) Plan Amendment (PA)/Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) for the Ocotillo Express Wind Energy Facility (OWEF) and by this notice is announcing the availability of the Proposed PA and Final EIS/EIR.

Road ecology in environmental impact assessment

International Nuclear Information System (INIS)

Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

2014-01-01

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Road ecology in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

2014-09-15

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

10 CFR 1021.310 - Environmental impact statements.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impact statements. 1021.310 Section 1021.310 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES Implementing Procedures § 1021.310 Environmental impact statements. DOE shall prepare and...

Integrated environmental policy: A review of economic analysis.

Science.gov (United States)

Wiesmeth, Hans; Häckl, Dennis

2017-04-01

Holistic environmental policies, which emerged from a mere combination of technical activities in waste management some 40 years ago, constitute the most advanced level of environmental policies. These approaches to environmental policy, among them the policies in integrated waste management, attempt to guide economic agents to an environment-friendly behaviour. Nevertheless, current holistic policies in waste management, including policies on one-way drinks containers and waste electrical and electronic equipment, and implementations of extended producer responsibility with further applications to waste electrical and electronic equipment, reveal more or less severe deficiencies - despite some positive examples. This article relates these policy failures, which are not necessarily the result of an insufficient compliance with the regulations, to missing constitutive elements of what is going to be called an 'integrated environmental policy'. This article therefore investigates - mostly from a practical point of view - constitutive elements, which are necessary for a holistic policy to serve as a well-functioning allocation mechanism. As these constitutive elements result from a careful 'integration' of the environmental commodities into the economic allocation problems, we refer to these policies as 'integrated environmental policies'. The article also discusses and illustrates the main steps of designing such a policy - for waste electrical and electronic equipment and a (possible) ban of Glyphosat in agriculture. As these policies are dependent on economic and political stability with environmental awareness sufficiently developed, the article addresses mostly waste management policies in highly industrialised countries.

77 FR 25781 - Environmental Impact Statement; Washington, DC

Science.gov (United States)

2012-05-01

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement... Columbia, Department of Transportation. ACTION: Notice of Intent to Prepare a Draft Environmental Impact... agencies and the public that a Draft Environmental Impact Statement (DEIS) will be prepared to assess the...

10 CFR 51.91 - Final environmental impact statement-contents.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-contents. 51.91... Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.91 Final environmental impact statement—contents. (a)(1) The final environmental impact statement will include responses...

Appendix E: Research papers. Use of remote sensing in landscape stratification for environmental impact assessment

Science.gov (United States)

Stanturf, J. A.; Heimbuch, D. G.

1980-01-01

A refinement to the matrix approach to environmental impact assessment is to use landscape units in place of separate environmental elements in the analysis. Landscape units can be delineated by integrating remotely sensed data and available single-factor data. A remote sensing approach to landscape stratification is described and the conditions under which it is superior to other approaches that require single-factor maps are indicated. Flowcharts show the steps necessary to develop classification criteria, delineate units and a map legend, and use the landscape units in impact assessment. Application of the approach to assessing impacts of a transmission line in Montana is presented to illustrate the method.

10 CFR 51.70 - Draft environmental impact statement-general.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-general. 51.70... Implementing Section 102(2) Environmental Impact Statements § 51.70 Draft environmental impact statement—general. (a) The NRC staff will prepare a draft environmental impact statement as soon as practicable...

10 CFR 51.71 - Draft environmental impact statement-contents.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-contents. 51.71... Implementing Section 102(2) Environmental Impact Statements § 51.71 Draft environmental impact statement—contents. (a) Scope. The draft environmental impact statement will be prepared in accordance with the scope...

77 FR 59875 - Environmental Impact and Related Procedures

Science.gov (United States)

2012-10-01

... repair project that do not typically involve significant environmental impacts. Specifically, the FHWA... damaged facility to address concerns such as safety and environmental impacts. The agencies also seek... kinds of projects and activities described in this paragraph and the environmental impacts of such...

Building lifespan: effect on the environmental impact of building components in a Danish perspective

DEFF Research Database (Denmark)

Marsh, Rob

2017-01-01

of building lifespan are inadequately addressed. The aim of this research is therefore to explore how environmental impact from building components is affected by building lifespans of 50, 80, 100 and 120 years in a Danish context. LCAs are undertaken for 792 parametric variations of typical construction...... solutions, covering all primary building components and based on contemporary practice. A full statistical analysis is carried out, which shows a significant statistical correlation between changes in building lifespan and environmental impact for all primary building components, except windows......Construction professionals must now integrate environmental concerns with life cycle assessment (LCA) early in the procurement process. Building lifespan is important to LCA, since results must be normalized on an annualized basis for comparison. However, the scientific literature shows that issues...

Final Programmatic Environmental Impact Statement for stockpile stewardship and management: Volume 3

International Nuclear Information System (INIS)

1996-09-01

The Department of Energy (DOE) has been directed by the President and Congress to maintain the safety and reliability of the reduced nuclear weapons stockpile in the absence of underground nuclear testing. In order to fulfill that responsibility, DOE has developed a Stockpile Stewardship and Management Program to provide a single highly integrated technical program for maintaining the continued safety and reliability of the nuclear stockpile. The Stockpile Stewardship and Management Programmatic Environmental Impact Statement (PEIS) describes and analyzes alternative ways to implement the proposed actions for the Stockpile Stewardship and Management Program. This document consists of Volume III, Appendix I entitled ''National Ignition Facility Project-Specific Analysis,'' which investigates the environmental impacts resulting from constructing and operating the proposed National Ignition Facility

Impact of Deforestation on Agro-Environmental Variables in Cropland, North Korea

Directory of Open Access Journals (Sweden)

Chul-Hee Lim

2017-08-01

Full Text Available Deforestation in North Korea is becoming the epitome of the environmental change occurring in the Korean Peninsula. This study estimates the agro-environmental variables of North Korea’s croplands and analyzes the impact of deforestation using the GEPIC (GIS-based EPIC (Environmental Policy Integrated Climate model and time-series land cover maps. To identify the changes in agricultural quality under deforestation, wind erosion, water erosion, organic carbon loss, and runoff were selected as the agro-environmental variables having an impact on cropland stability and productivity. Land cover maps spanning the past three decades showed that 75% of the forests were converted to croplands and that 69% of all converted croplands were originally forests, confirming the significant correlation between deforestation and cropland expansion in North Korea. Despite limitations in the verification data, we conducted qualitative and quantitative validation of the estimated variables and confirmed that our results were reasonable. Over the past 30 years, agro-environmental variables showed no clear time-series changes resulting from climate change, but changes due to spatial differences were seen. Negative changes in organic carbon loss, water erosion, and runoff were observed, regardless of the crop type. On newly-converted agricultural lands, runoff is 1.5 times higher and water-driven erosion and soil organic loss are more than twice as high compared to older croplands. The results showed that the agro-environment affected by deforestation had an impact on cropland stability and productivity.

10 CFR 51.95 - Postconstruction environmental impact statements.

Science.gov (United States)

2010-01-01

... NRC staff will prepare a supplement to the final environmental impact statement on the construction... 10 Energy 2 2010-01-01 2010-01-01 false Postconstruction environmental impact statements. 51.95... Implementing Section 102(2) Final Environmental Impact Statements-Production and Utilization Facilities § 51.95...

78 FR 8964 - Environmental Impact and Related Procedures

Science.gov (United States)

2013-02-07

... Administration 49 CFR Part 622 [Docket No. FTA-2011-0056] RIN 2132-AB03 Environmental Impact and Related... an environmental impact statement. DATES: Effective on February 7, 2013. FOR FURTHER INFORMATION... the list of project types that normally result in the preparation of an Environmental Impact Statement...

16 CFR 1.85 - Final environmental impact statements.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Final environmental impact statements. 1.85... Final environmental impact statements. (a) After the close of the comment period, the Bureau responsible for the matter will consider the comments received on the draft environmental impact statement and...

Evaluating the Relative Environmental Impact of Countries

OpenAIRE

Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot Singh

2010-01-01

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ?models? can be identified. We provide novel metrics of country-specific environmental impact ranks ? one proportional to total resource availability per country and an absolute (total) measure of impact ? that explicitly avoid incorporating confounding human health or economic i...

Dietary Strategies to Reduce Environmental Impact: A Critical Review of the Evidence Base.

Science.gov (United States)

Ridoutt, Bradley G; Hendrie, Gilly A; Noakes, Manny

2017-11-01

The food system is a major source of environmental impact, and dietary change has been recommended as an important and necessary strategy to reduce this impact. However, assessing the environmental performance of diets is complex due to the many types of foods eaten and the diversity of agricultural production systems and local environmental settings. To assess the state of science and identify knowledge gaps, an integrative review of the broad topic of environment and diet was undertaken, with particular focus on the completeness of coverage of environmental concerns and the metrics used. Compared with the 14 discrete environmental areas of concern identified in the United Nations Sustainable Development Goals, the located journal literature mainly addressed greenhouse gas (GHG) emissions and, to a lesser extent, land and water use. Some relevant concerns were rarely addressed or not addressed at all. In the case of GHG emissions, changes in land use and soil carbon stocks were seldom considered. This represents a disconnect between the science informing strategic climate action in the agricultural sector and the science informing public health nutrition. In the case of land and water use, few studies used metrics that are appropriate in a life-cycle context. Some metrics produce inherently biased results, which misinform about environmental impact. The limited evidence generally points to recommended diets having lower environmental impacts than typical diets, although not in every case. This is largely explained by the overconsumption of food energy associated with average diets, which is also a major driver of obesity. A shared-knowledge framework is identified as being needed to guide future research on this topic. Until the evidence base becomes more complete, commentators on sustainable diets should not be quick to assume that a dietary strategy to reduce overall environmental impact can be readily defined or recommended. © 2017 American Society for

The importance of meteorology in the environmental impacts assessment of nuclear power plants: scenarios studies using geographic information system

International Nuclear Information System (INIS)

Leao, I.L.B.; Biagio, R.M.S.; Costa, E.M.; Alves, R.N.

1999-01-01

The Brazilian Nuclear Power Plant (CNAAA) is located in a very complex region of the state of Rio de Janeiro. The environmental impact caused by the normal operation of such installation can be better evaluated by using an integrated approach, in which a geographical information system plays a very important role. In this study, environmental scenarios are integrated with some extreme and representative meteorological situations. (author)

Final Environmental Impact Statement/Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore

International Nuclear Information System (INIS)

1992-08-01

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories' operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR technical appendices which provide technical support for the analyses in Volume 1 and also provide additional information and references

Efficacy and efficiency of Agri-environmental payments in impacts of crops' management

Science.gov (United States)

Blasi, Emanuele; Martella, Angelo; Passeri, Nicolo; Ghini, Paolo

2015-04-01

Since the 90s, in Europe the Common Agricultural Policy (CAP) started to activate measures for improving the sustainability of European agriculture, these measures were systematized in 2000 with the tools of rural development, pursuing a synergistic environmental action trough the agri-environmental payments. Since their definition, those payments were designed to ensure the protection, maintenance and enhancement of natural resources (water, soil, forests), biodiversity (species and habitat), and landscape. In particular initiatives as set aside, afforestation, organic agriculture, integrated pest management, low input and precision agriculture have enriched the agricultural management practices. The aim of this work is to check the trend between agro-environmental subsidies and environmental performance (based on Ecological Indicators and CO2 evaluation) at country level in EU, in order to study the regulatory framework impact in addressing the European cropping system towards sustainability. In particular soils and their land use can storage CO2 as pool and so provide environmental services and, on the other hand the agricultural practices can stimulate the emission and the environmental footprint. Impacts (so called emissions/footprints and storage/environmental services) will be compared with the Agri-environmental Payments for calculating performances due to environmental management practices, supported by political initiatives. Such analysis sustains the European policy makers towards more suitable agricultural policies and in particular it can address national sustainability through agricultural practices.

Integrated systems optimization model for biofuel development: The influence of environmental constraints

Science.gov (United States)

Housh, M.; Ng, T.; Cai, X.

2012-12-01

The environmental impact is one of the major concerns of biofuel development. While many other studies have examined the impact of biofuel expansion on stream flow and water quality, this study examines the problem from the other side - will and how a biofuel production target be affected by given environmental constraints. For this purpose, an integrated model comprises of different sub-systems of biofuel refineries, transportation, agriculture, water resources and crops/ethanol market has been developed. The sub-systems are integrated into one large-scale model to guide the optimal development plan considering the interdependency between the subsystems. The optimal development plan includes biofuel refineries location and capacity, refinery operation, land allocation between biofuel and food crops, and the corresponding stream flow and nitrate load in the watershed. The watershed is modeled as a network flow, in which the nodes represent sub-watersheds and the arcs are defined as the linkage between the sub-watersheds. The runoff contribution of each sub-watershed is determined based on the land cover and the water uses in that sub-watershed. Thus, decisions of other sub-systems such as the land allocation in the land use sub-system and the water use in the refinery sub-system define the sources and the sinks of the network. Environmental policies will be addressed in the integrated model by imposing stream flow and nitrate load constraints. These constraints can be specified by location and time in the watershed to reflect the spatial and temporal variation of the regulations. Preliminary results show that imposing monthly water flow constraints and yearly nitrate load constraints will change the biofuel development plan dramatically. Sensitivity analysis is performed to examine how the environmental constraints and their spatial and the temporal distribution influence the overall biofuel development plan and the performance of each of the sub

76 FR 53453 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2011-08-26

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8998-7] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements. Filed 08/15/2011 through... Lease Sale 193, Revised Information, Analyzing the Environmental Impact of Natural Gas Development and...

Public understanding of environmental impacts of electricity deregulation

International Nuclear Information System (INIS)

Johnson, Branden B.; Frank, Pamela G.

2006-01-01

Electricity deregulation has aroused concern that environmental quality might be harmed by consumer preferences for cheap, 'dirty' (e.g., coal) electricity products, despite the perhaps stronger influence of supply side policy on environmental impacts. This outcome depends on public understanding of the environmental impacts of their decisions, which this study explored with interviews, focus groups, and surveys in New Jersey. People had thought little about the topic, were unable to articulate how electricity production might affect the environment except in very general terms, and were mostly unwilling to guess whether deregulation's impacts would be negative, neutral or positive. Those who did guess expected negative impacts less than any other kind. Reactions to specific 'reasons' for expecting no, positive or negative impacts suggested that consumers had little structure to their mental models in this area; for example, people who thought positive-impact reasons were probably true were not necessarily likely to see negative-impact reasons as probably false. However, in the aggregate, people seemed to have a fairly consistent ranking of energy sources by expected negative environmental impacts. Earlier research found that consumers comparing two electricity products on environmental impacts reached different decisions if they had energy-source-only or energy-source-plus-emissions information. Although regulator-required 'environmental labels' for electricity products provide both source and emissions data, it is not clear that they do an adequate job of both alerting consumers to the possibility of negative environmental impacts and identifying the relative life-cycle impacts of different products so as to produce informed consumer decisions

28 CFR 91.63 - Preparing an Environmental Impact Statement

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Preparing an Environmental Impact... CORRECTIONAL FACILITIES Environmental Impact Review Procedures for VOI/TIS Grant Program Environmental Review Procedures § 91.63 Preparing an Environmental Impact Statement (a) Initial determination. OJP will determine...

78 FR 37846 - Resource Management Plan/General Plan and Environmental Impact Statement/Environmental Impact...

Science.gov (United States)

2013-06-24

...The Bureau of Reclamation and the California Department of Parks and Recreation (CDPR) have prepared a Final Environmental Impact Statement/Environmental Impact Report (EIS/EIR) for the San Luis Reservoir State Recreation Area Resource Management Plan/General Plan (RMP/GP). The Final EIS/EIR describes and presents the environmental effects of the No Action/No Project Alternative and three Action Alternatives for implementing the RMP/GP. A Notice of Availability of the Draft EIS/EIR was published in the Federal Register on August 3, 2012 (77 FR 46518). The comment period on the Draft EIS/EIR ended on October 2, 2012. The Final EIS/EIR contains responses to all comments received and reflects comments and any additional information received during the review period.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

A. Fedoryszyn

2013-01-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method.The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authorsindicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

Fedoryszyn A.

2013-03-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method. The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authors indicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Integrating environmental equity, energy and sustainability: A spatial-temporal study of electric power generation

Science.gov (United States)

Touche, George Earl

The theoretical scope of this dissertation encompasses the ecological factors of equity and energy. Literature important to environmental justice and sustainability are reviewed, and a general integration of global concepts is delineated. The conceptual framework includes ecological integrity, quality human development, intra- and inter-generational equity and risk originating from human economic activity and modern energy production. The empirical focus of this study concentrates on environmental equity and electric power generation within the United States. Several designs are employed while using paired t-tests, independent t-tests, zero-order correlation coefficients and regression coefficients to test seven sets of hypotheses. Examinations are conducted at the census tract level within Texas and at the state level across the United States. At the community level within Texas, communities that host coal or natural gas utility power plants and corresponding comparison communities that do not host such power plants are tested for compositional differences. Comparisons are made both before and after the power plants began operating for purposes of assessing outcomes of the siting process and impacts of the power plants. Relationships between the compositions of the hosting communities and the risks and benefits originating from the observed power plants are also examined. At the statewide level across the United States, relationships between statewide composition variables and risks and benefits originating from statewide electric power generation are examined. Findings indicate the existence of some limited environmental inequities, but they do not indicate disparities that confirm the general thesis of environmental racism put forth by environmental justice advocates. Although environmental justice strategies that would utilize Title VI of the 1964 Civil Rights Act and the disparate impact standard do not appear to be applicable, some findings suggest potential

Planning Environmental Impact Assessment Orienting Sustainable Development:Opportunities and Challenges

Institute of Scientific and Technical Information of China (English)

Sun Yanjun; Chen Xingeng; Bao Yun; Peng Xiaochun; Gao Changbo

2005-01-01

Strategic Environmental Assessment is a frontier subject in the field of Environmental Impact Assessment. In the past two decades, especially in recent years, much more importance has been attached to Strategic Environmental Assessment. The Environmental Impact Assessment Law of the P.R.China which was promulgated provides a great opportunity for the development of Planning Environmental Impact Assessment and brings great challenges for the development of traditional Project Environmental Impact Assessment and Planning Environmental Impact Assessment at the same time.In order to promote the implementation of"The EIA Law", the inherent limitations of Project Environmental Impact Assessment must be identified sufficiendy and the theory research and practice of Planning Environmental Impact Assessment should be strengthened as well. Measures should be taken currendy to enforce the operation system. The authors wish to offer a few references to the progress and implementation of Planning Environmental Impact Assessment in China.

24 CFR 58.37 - Environmental impact statement determinations.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Environmental impact statement... Classification § 58.37 Environmental impact statement determinations. (a) An EIS is required when the project is... and Urban Development ENVIRONMENTAL REVIEW PROCEDURES FOR ENTITIES ASSUMING HUD ENVIRONMENTAL...

IRP methods for Environmental Impact Statements of utility expansion plans

International Nuclear Information System (INIS)

Cavallo, J.D.; Hemphill, R.C.; Veselka, T.D.

1992-01-01

Most large electric utilities and a growing number of gas utilities in the United States are using a planning method -- Integrated Resource Planning (IRP) - which incorporates demand-side management (DSM) programs whenever the marginal cost of the DSM programs are lower than the marginal cost of supply-side expansion options. Argonne National Laboratory has applied the IRP method in its socio-economic analysis of an Environmental Impact Statement (EIS) of power marketing for a system of electric utilities in the mountain and western regions of the United States. Applying the IRP methods provides valuable information to the participants in an EIS process involving capacity expansion of an electric or gas utility. The major challenges of applying the IRP method within an EIS are the time consuming and costly task of developing a least cost expansion path for each altemative, the detailed quantification of environmental damages associated with capacity expansion, and the explicit inclusion of societal-impacts to the region

Evaluation of the environmental impact in Mexico

International Nuclear Information System (INIS)

Mendoza, O.

2004-01-01

The present work, shows the origin and development of the evaluation of the environmental impact in Mexico, like juridical-environmental instrument, it is the environmental politics' s instrument that is relatively new, with the time it has suffered modifications of technical, administrative, law and conceptual nature. It has changed in substantial form, its importance inside the general outline of protection of the natural resources of Mexico, which is reflected in the structure of the organisms that are responsible for applying it. The objectives of the work embrace describing the antecedents of the evaluation of the environmental impact, to provide a reference mark, and to observe the evolution of this juridical instrument, as well as to summarize more outstanding aspects of the evaluation of the environmental impact; making emphasis in the form like it has been related with the environmental politics' s instruments; and to point out the changes that the procedure of evaluation of the environmental impact has fomented in the development outlines, in the technology and even in the human thought. The results of the evaluation and dictamination of the projects that entered to the procedure of environmental impact in the period 1995-2000 are observed that of the 6,100 entered projects, 5,533 were resolved, which means that answer was given to 91% of the total of projects that entered; of the work it can be concluded that this juridical-environmental instrument, it has evolved with the step of the time and it has left adapting according to the juridical, administrative procedures, technicians and of sustainable development of Mexico

Integration of Environmental Education and Environmental Law Enforcement for Police Officers

Science.gov (United States)

Bovornkijprasert, Sravoot; Rawang, Wee

2016-01-01

The purpose of this research was to establish an integrated model of environmental education (EE) and environmental law enforcement (ELE) to improve the efficiency of functional competency for police officers in Bangkok Metropolitan Police Division 9 (MBP Div. 9). The research design was mixed methods of quantitative and qualitative approaches…

Matrix of Aspects and Environmental Impacts as a Tool of Disclosure of Environmental Contingencies

Directory of Open Access Journals (Sweden)

Diene Hellmann Pereira

2014-08-01

Full Text Available Companies that, as a result of their activities, cause an impact on the environment may incur environmental contingencies. Depending on the extent of the impact and the likelihood of future monetary obligations, accounting standards determine situations in which the company shall disclose such events in the explanatory notes. To contribute to this topic, this article aims to verify how a matrix of aspects and environmental impacts can contribute to the accounting disclosure of environmental contingencies for resellers in gas stations. To achieve this, this study used a matrix formed by information regarding the aspects and environmental impacts, in which were considered the scope, severity, and frequency of occurrence of each analyzed situation. The results show that instances of environmental impact in the business environment might be followed through the matrix of environmental aspects and impacts, and that this tool can help in judging which information is subject to disclosure in the notes.

75 FR 31834 - Adoption of Environmental Impact Statement; Availability of an Environmental Reevaluation

Science.gov (United States)

2010-06-04

... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration Adoption of Environmental Impact...), Department of Transportation (DOT). ACTION: Adoption and Recirculation of Final Environmental Impact... Impact Statement (EIS) issued by the Federal Transit Administration (FTA) in 2004 for the construction of...

40 CFR 124.61 - Final environmental impact statement.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Final environmental impact statement... environmental impact statement. No final NPDES permit for a new source shall be issued until at least 30 days after the date of issuance of a final environmental impact statement if one is required under 40 CFR 6...

Comparison of the energy and environmental impact by integrating a H_2 vehicle and an electric vehicle into a zero-energy building

International Nuclear Information System (INIS)

Cao, Sunliang

2016-01-01

Highlights: • Integrating a commercial-scale H_2 vehicle (HV) or electric vehicle (EV) into a ZEB. • Simultaneously fulfilling net-zero energy building and absolute-zero energy vehicle. • Energy performance comparison between the ZEBs with HV, EV, and no vehicle. • The energy matching-enhancing solutions for integrating the HV or EV with the ZEB. • Solutions for improving the matching and relieving the negative impact on the grid. - Abstract: The boundary extension of a zero-energy building to integrate a new energy vehicle will facilitate the realization of the target set by the EU 2050 roadmap. In this study, either a hydrogen vehicle (HV) or an electric vehicle (EV) is integrated into a renewable-supported building system with appropriate control strategies. The focused variables in this study are renewable energy capacities, vehicle system options, extents to utilize vehicle storages for domestic purposes, and the Excess REe-HW recharging strategies. The analysing aspects include the energy and environmental impact as well as the energy matching and the grid interactions. The results show that the annual net-zero energy/emission balance can be met by a 16, 12, and 12 kW rated wind turbine, or by a 195.8, 160.2, and 142.4 m"2 PV, for the building with the HV, the EV and no vehicle (NV), respectively. The building with the HV will be more demanding in meeting the balance due to the less efficient HV system than that with the EV. Moreover, better matching for the zero-energy system can be achieved by relieving the condition to discharge the vehicle storages for domestic usages and by using the Excess REe-HW recharging strategy. However, their negative effect will be a slight increase in the annual net-energy consumption, due to an increased loss from both the HV/EV integrated system and the thermal storage.

Integrated Manufacturing Strategy: A Prerequisite for Environmental Excellence

OpenAIRE

W. Rocky Newman; Mark D. Hanna; William E.Youngdahl

1994-01-01

This paper is based upon a framework which links the effective integration of manufacturing strategy into overall corporate strategy (Wheelwright and Hayes 1985) and corporate attainment of environmental excellence (Winsemius and Guntram 1992). By exploring the practical implications of this framework, the paper suggests that improvement of environmental performance may depend on adequate integration of manufacturing strategy into overall corporate strategy. Hence, situations may commonly exi...

A state-impact-state methodology for assessing environmental impact in land use planning

International Nuclear Information System (INIS)

Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

2014-01-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

A state-impact-state methodology for assessing environmental impact in land use planning

Energy Technology Data Exchange (ETDEWEB)

Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

2014-04-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

31 CFR 26.3 - Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental...

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental Impact Assessments (EIAs). 26.3 Section 26.3 Money and... DEVELOPMENT BANDS (MDBs) § 26.3 Availability of Environmental Impact Assessment Summaries (EIA Summaries) and...

Equity Impacts of Environmental Policy

OpenAIRE

Antonio M. Bento

2013-01-01

This article surveys recent literature on the equity impacts of environmental policy. We focus on studies that look at the distribution of costs and benefits of alternative environmental policies. We also examine potentially important trade-offs between efficiency and equity that arise in the context of environmental policy, as well as transition effects. In many of the applications surveyed here, environmental policies can be regressive. Strategies are discussed to reduce this regressivity t...

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore

International Nuclear Information System (INIS)

1992-08-01

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories' operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR, which in part relies on the detailed information in the appendices, and comprehensively discusses the proposed action, the alternatives, and the existing conditions and impacts of the proposed action and the alternatives

Salt Lake City Area Integrated Projects Electric Power Marketing. Draft environmental impact statement: Volume 4, Appendixes B-D

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Salt Lake City Area Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Green, Gunnison, Rio Grande, and Colorado rivers and on Deer and Plateau creeks in the states of Wyoming, Utah, Colorado, Arizona, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams;) are influenced by Western power scheduling and transmission decisions. The EIS alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Westerns firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this environmental impact statement (EIS) include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources.

Salt Lake City Area Integrated Projects Electric Power Marketing. Draft environmental impact statement: Volume 2, Sections 1-16

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Salt Lake City Area Office of the Western Area Power Administration (Western) markets electricity produced at hydroelectric facilities operated by the Bureau of Reclamation. The facilities are known collectively as the Salt Lake City Area Integrated Projects (SLCA/IP) and include dams equipped for power generation on the Green, Gunnison, Rio Grande, and Colorado rivers and on Deer and Plateau creeks in the states of Wyoming, Utah, Colorado, Arizona, and New Mexico. Of these facilities, only the Glen Canyon Unit, the Flaming Gorge Unit, and the Aspinall Unit (which includes Blue Mesa, Morrow Point, and Crystal dams;) are influenced by Western power scheduling and transmission decisions. The EIS alternatives, called commitment-level alternatives, reflect combinations of capacity and energy that would feasibly and reasonably fulfill Westerns firm power marketing responsibilities, needs, and statutory obligations. The viability of these alternatives relates directly to the combination of generation capability of the SLCA/IP with energy purchases and interchange. The economic and natural resource assessments in this environmental impact statement (EIS) include an analysis of commitment-level alternatives. Impacts of the no-action alternative are also assessed. Supply options, which include combinations of electrical power purchases and hydropower operational scenarios reflecting different operations of the dams, are also assessed. The EIS evaluates the impacts of these scenarios relative to socioeconomics, air resources, water resources, ecological resources, cultural resources, land use, recreation, and visual resources.

76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

Science.gov (United States)

2011-10-24

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the availability of the Final EIS/EIR. By this Notice the BLM is also segregating the public lands within the Tule Project application area from appropriation under the public land laws including the Mining Law, but not the Mineral Leasing or Material Sales Act, for a period of 2 years.

Sierra Pacific Power Company Alturas Transmission Line Project, Final Environmental Impact Report/Environmental Impact Statement. Volume 2: Comments and responses

International Nuclear Information System (INIS)

1995-11-01

Sierra Pacific Power Company has proposed the construction and operation of a 345,000 volt overhead electric power transmission line from Alturas, California to Reno, Nevada. This Environmental Impact Report/Environmental Impact Statement will assess the potential environmental impacts of the proposed project and alternatives. This report contains public comments which were received on the Draft EIR/S. Significant issues may be identified through public and agency comments

Evaluation of Environmental Impacts for Rice Agroecosystems using Life Cycle Assessment (LCA

Directory of Open Access Journals (Sweden)

S. Khoramdel

2017-02-01

Full Text Available In order to evaluate life cycle assessment (LCA for rice agroecosystems based on mean of nitrogen fertilizer levels (less than 190, 190-200, 200-210, 210-220 and more than 220 kg N ha during 1999-2012, an experiment was conducted. Four steps includung goal definition and scoping, inventory analysis, life cycle impact assessment and integration and interpretation were computed. Functional unit was considered as one tone paddy. Impact categories were acidification, eutrophication in aquatic and tresstrial ecosystems and global warming. The results showed that the highest paddy yield was obtained 5.35 t.ha-1 in 190-200 kg N ha. The maximum aquatic eutrophication potential was computed for more than 220 kg N ha-1 with 0.79 PO4 equiv./t paddy. EcoX per one tone paddy and maximum environmental impacts was belonged to aquatic eutrophication (0.13 Eco-index per one tone paddy. It seems that system management including green manure, nitrogen fixing species and reduced tillage could be regarded to reduce problematic environmental impacts in rice production systems.

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore

International Nuclear Information System (INIS)

1992-08-01

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories' operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains copies of the written comments and transcripts of individual statements at the public hearing and the responses to them

The environmental impacts of wind and water power

International Nuclear Information System (INIS)

Twidell, J.W.

1994-01-01

The success of a typical renewable energy project depends about 40% on technology and about 60% on institutional factors. The latter include regulations, financing and environmental impact, with many of the regulations and some financial factors themselves relating to environmental impact. This paper attempts to define and categorize aspects of environmental impact, especially regarding wind and hydro power projects. (author)

75 FR 8047 - Notice of Intent To Prepare a Joint Environmental Impact Statement and Environmental Impact...

Science.gov (United States)

2010-02-23

...Pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA), the U.S. Army Corps of Engineers, Sacramento District (USACE) intends to prepare a joint environmental impact statement/environmental impact report (EIS/EIR) for the Lower Walnut Creek General Reevaluation Report (LWCGRR). USACE will serve as lead agency for compliance with NEPA, and the Contra Costa County Flood Control and Water Conservation District (CCCFCWCD) will serve as lead agency for compliance with CEQA. The LWCGRR will evaluate alternatives, including a locally preferred plan, for providing flood risk management and ecosystem restoration along the northern portion of the Walnut Creek watershed in the Central Coast of California. The approximate drainage area of the proposed action and analysis is 180 square miles.

40 CFR 1502.19 - Circulation of the environmental impact statement.

Science.gov (United States)

2010-07-01

... impact statement. 1502.19 Section 1502.19 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.19 Circulation of the environmental impact statement. Agencies shall circulate the entire draft and final environmental impact statements except for certain appendices as...

Decision-making in environmental radiation protection: using the ERICA Integrated Approach

International Nuclear Information System (INIS)

Zinger, I.; Copplestone, D.; Howard, B.J.

2008-01-01

The ERICA Integrated Approach and its associated tool and databases provide a method by which the likely impact of radioactive discharges on the environment can be evaluated, see Fig. 1. The various factors, which should be taken into account when making decisions both during and after an assessment has been made, are discussed for each stage in the assessment process for a hypothetical case study. The assessment will demonstrate the issues associated with the decision-making process at Tiers 1 and 2 within the ERICA Tool and how they may vary. The case study, set in England, evaluates the environmental impact of radioactive substances released under authorisation in response primarily to conservation legislation, because of the need to demonstrate that no adverse impacts will occur on Natura 2000 sites as a result of the release of an authorised substance

10 CFR 51.81 - Distribution of draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

77 FR 25782 - Environmental Impact Statement: Madison County, IL

Science.gov (United States)

2012-05-01

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement...: The FHWA is issuing this notice of intent to advise the public that an Environmental Impact Statement... the Illinois Department of Transportation (IDOT) will prepare an Environmental Impact Statement (EIS...

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore

International Nuclear Information System (INIS)

1992-08-01

The US Department of Energy (DOE) and the Regents of the University of California (UC) propose the continued operation, including near-term proposed projects, of the Lawrence Livermore National Laboratory (LLNL). In addition, DOE proposes the continued operation, including near-term proposed projects, of Sandia National Laboratories, Livermore (SNL, Livermore). Continued operation plus proposed projects at the two Laboratories is needed so that the research and development missions established by Congress and the President can continue to be supported. As provided and encouraged by the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA), DOE and UC have prepared this document as a joint Environmental Impact Statement (EIS) and Environmental Impact Report (EIR) to analyze the impacts of the proposed action. In addition, this document discusses a no action alternative for continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative focused on specific adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative. This document also examines the alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. The environmental documentation process provides information to the public, government agencies, and decision makers about the environmental impacts of implementing the proposed and alternative actions. In addition, this environmental documentation identifies alternatives and possible ways to reduce or prevent environmental impacts. A list of the issues raised through the EIS/EIR scoping process is presented

[Using the synergies between strategic environmental evaluation and HIA to advance the integration of environmental and health issues in public decision-making processes].

Science.gov (United States)

Simos, Jean; Arrizabalaga, Philippe

2006-01-01

The Geneva rule was the first one in Switzerland to introduce the concept of Strategic Environmental Assessment (SEA). This assessment constitutes a decision making aid which describes the process set up to allow evaluation of potential environmental impact and comparison of possible variants, recommends the choice for the best option and suggests the precautions to take. It presents much resemblances to HIA. In this case therefore the application of SEA in the urban planning project MICA has been presented. It is in this framework that a first experience of integration HIA to the SEA process was realized. In an additional way to SEA, HIA is focused on the following fields of potential impact: transport and movements, housing, public facilities, water management.

Environmental Impact Assessment in Antarctica

NARCIS (Netherlands)

Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

2008-01-01

This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

Health Impacts of Environmental Mycobacteria†

OpenAIRE

Primm, Todd P.; Lucero, Christie A.; Falkinham, Joseph O.

2004-01-01

Environmental mycobacteria are emerging pathogens causing opportunistic infections in humans and animals. The health impacts of human-mycobacterial interactions are complex and likely much broader than currently recognized. Environmental mycobacteria preferentially survive chlorination in municipal water, using it as a vector to infect humans. Widespread chlorination of water has likely selected more resistant environmental mycobacteria species and potentially explains the shift from M. scrof...

Transboundary Environmental Impact Assessment : An Introduction

NARCIS (Netherlands)

Bastmeijer, C.J.; Koivurova, T.; Bastmeijer, K.; Koivurova, T.

2008-01-01

Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

78 FR 59414 - Environmental Impact Statement; King County, Washington

Science.gov (United States)

2013-09-26

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement; King... prepare an environmental impact statement. SUMMARY: The Federal Highway Administration is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for a proposed...

77 FR 74479 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2012-12-14

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9006-5] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 12/03/2012 Through... Transit Project, Construction-Related Potential Impacts on Business Revenue, St. Paul and Twin Cities...

77 FR 20690 - Environmental Impact Statement: Albuquerque, New Mexico

Science.gov (United States)

2012-04-05

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement.... SUMMARY: The FHWA is rescinding the notice of intent to prepare an environmental impact statement for the... rescinding the Notice of Intent to prepare an Environmental Impact Statement (EIS) for the proposed...

Measuring environmental sustainability in agriculture: A composite environmental impact index approach.

Science.gov (United States)

Sabiha, Noor-E; Salim, Ruhul; Rahman, Sanzidur; Rola-Rubzen, Maria Fay

2016-01-15

The present study develops a composite environmental impact index (CEII) to evaluate the extent of environmental degradation in agriculture after successfully validating its flexibility, applicability and relevance as a tool. The CEII tool is then applied to empirically measure the extent of environmental impacts of High Yield Variety (HYV) rice cultivation in three districts of north-western Bangladesh for a single crop year (October, 2012-September, 2013). Results reveal that 27 to 69 per cent of the theoretical maximum level of environmental damage is created due to HYV rice cultivation with significant regional variations in the CEII scores, implying that policy interventions are required in environmentally critical areas in order to sustain agriculture in Bangladesh. Copyright © 2015 Elsevier Ltd. All rights reserved.

76 FR 58833 - Notice of Availability of the Draft Environmental Impact Statement/Environmental Impact Report...

Science.gov (United States)

2011-09-22

...The Department of the Interior and the California Department of Fish and Game have prepared a draft environmental impact statement and environmental impact report (EIS/EIR) evaluating the effects of removing four dams on the Klamath River in southern Oregon and northern California. These documents are one part of the total record that will inform the decision of the Secretary of the Interior on whether removing the dams will advance restoration of the fisheries of the Klamath River Basin and will be in the public interest.

Predicting on-site environmental impacts of municipal engineering works

International Nuclear Information System (INIS)

Gangolells, Marta; Casals, Miquel; Forcada, Núria; Macarulla, Marcel

2014-01-01

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

Predicting on-site environmental impacts of municipal engineering works

Energy Technology Data Exchange (ETDEWEB)

Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Núria, E-mail: nuria.forcada@upc.edu; Macarulla, Marcel, E-mail: marcel.macarulla@upc.edu

2014-01-15

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

Environmental impacts of utility-scale solar energy

Science.gov (United States)

Hernandez, R.R.; Easter, S.B.; Murphy-Mariscal, M. L.; Maestre, F.T.; Tavassoli, M.; Allen, E.B.; Barrows, C.W.; Belnap, J.; Ochoa-Hueso, R.; Ravi, S.; Allen, M.F.

2014-01-01

Renewable energy is a promising alternative to fossil fuel-based energy, but its development can require a complex set of environmental tradeoffs. A recent increase in solar energy systems, especially large, centralized installations, underscores the urgency of understanding their environmental interactions. Synthesizing literature across numerous disciplines, we review direct and indirect environmental impacts – both beneficial and adverse – of utility-scale solar energy (USSE) development, including impacts on biodiversity, land-use and land-cover change, soils, water resources, and human health. Additionally, we review feedbacks between USSE infrastructure and land-atmosphere interactions and the potential for USSE systems to mitigate climate change. Several characteristics and development strategies of USSE systems have low environmental impacts relative to other energy systems, including other renewables. We show opportunities to increase USSE environmental co-benefits, the permitting and regulatory constraints and opportunities of USSE, and highlight future research directions to better understand the nexus between USSE and the environment. Increasing the environmental compatibility of USSE systems will maximize the efficacy of this key renewable energy source in mitigating climatic and global environmental change.

77 FR 25165 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2012-04-27

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9002-7] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements filed 04/16/2012 through...-Specific Impacts Associated with the Plan of Operations, Sweetwater County, WY, Comment Period Ends: 06/11...

76 FR 53531 - Environmental Impact Statement: Hancock County, MS

Science.gov (United States)

2011-08-26

...)] Environmental Impact Statement: Hancock County, MS AGENCY: Federal Highway Administration (FHWA), Department Of... that an environmental impact statement will be prepared for a proposed highway project in Hancock... an Environmental Impact Statement (EIS) for the proposed widening and/or realignment of State Route...

77 FR 44234 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2012-07-27

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9004-2] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 07/16/2012 through... Analyze the Site-Specific Impacts Associated with the Plan of Operations, Sweetwater County, WY, Review...

77 FR 55213 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2012-09-07

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9004-9] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 08/27/2012 through... Conditions by Reducing Road-Related Impacts to Wildlife, Fish, Soil, and Water Resources and Restoration of...

BIOGAS STATIONS AND THEIR ENVIRONMENTAL IMPACTS

Directory of Open Access Journals (Sweden)

Vladimir Lapčik

2011-12-01

Full Text Available The article summarizes the authors’ experience with environmental impact assessment in branch of biogas plants. The introductory part of the paper describes legislative obligations of the Czech Republic concerning the fulfilment of the European Union’s limits as for utilization of renewable energy resources. The next parts of the paper deal with an impact analysis of biogas plants on the environment. The final part of the paper deals with experience with implementation of the environmental impact assessment process in the field of biogas plants in the Czech Republic.

75 FR 2517 - Notice of Intent To Prepare a Joint Environmental Impact Statement and Environmental Impact...

Science.gov (United States)

2010-01-15

...The action being taken is the preparation of a joint environmental impact statement/environmental impact report (EIS/EIR) for the Lower San Joaquin River Feasibility Study (LSJRFS). The EIS/EIR will be prepared in accordance with the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). The U.S. Army Corps of Engineers (USACE) will serve as lead agency for compliance with NEPA, and the San Joaquin Area Flood Control Agency (SJAFCA) will serve as lead agency for compliance with CEQA. The LSJRFS will evaluate alternatives, including a locally preferred plan, for providing flood damage reduction and ecosystem restoration along the lower (northern) portion of the San Joaquin River system in the Central Valley of California. The approximate area of the proposed action and analysis is identified in Figure 1.

MATHEMATICAL MODEL DESIGNATED FOR THE ASSESSMENT OF THE INTEGRATED ENVIRONMENTAL LOAD PRODUCED BY A BUILDING PROJECT

OpenAIRE

Lapidus Azariy Abramovich; Berezhnyy Aleksandr Yurevich

2012-01-01

In the paper, the author proposes a mathematical model designated for the assessment of the ecological impact produced on the environment within the territory of the construction site. Integrated index EI (Environmental Index) is introduced as a vehicle designated for the evaluation of the ecological load. EI represents the intensity of the ecological load, or a generalized and optimized parameter reflecting the intensity of the anthropogenic impact of the construction site onto the natural e...

10 CFR 51.72 - Supplement to draft environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Supplement to draft environmental impact statement. 51.72... Implementing Section 102(2) Environmental Impact Statements § 51.72 Supplement to draft environmental impact statement. (a) The NRC staff will prepare a supplement to a draft environmental impact statement for which a...

Towards integrating environmental performance in divisional performance measurement

Directory of Open Access Journals (Sweden)

Collins C Ngwakwe

2014-08-01

Full Text Available This paper suggests an integration of environmental performance measurement (EPM into conventional divisional financial performance measures as a catalyst to enhance managers’ drive toward cleaner production and sustainable development. The approach is conceptual and normative; and using a hypothetical firm, it suggests a model to integrate environmental performance measure as an ancillary to conventional divisional financial performance measures. Vroom’s motivation theory and other literature evidence indicate that corporate goals are achievable in an environment where managers’ efforts are recognised and thus rewarded. Consequently the paper suggests that environmentally motivated managers are important to propel corporate sustainability strategy toward desired corporate environmental governance and sustainable economic development. Thus this suggested approach modestly adds to existing environmental management accounting (EMA theory and literature. It is hoped that this paper may provide an agenda for further research toward a practical application of the suggested method in a firm.

Integration of Environmental Compliance at the Savannah River Site - 13024

International Nuclear Information System (INIS)

Hoel, David; Griffith, Michael

2013-01-01

The Savannah River Site (SRS) is a large federal installation hosting diverse missions and multiple organizations with competing regulatory needs. Accordingly, there was a need to integrate environmental compliance strategies to ensure the consistent flow of information between Department of Energy-Savannah River (DOE-SR), the regulatory agencies and other interested parties. In order to meet this objective, DOE and major SRS contractors and tenants have committed to a strategy of collaboratively working together to ensure that a consistent, integrated, and fully coordinated approach to environmental compliance and regulator relationships is maintained. DOE-SR and Savannah River Nuclear Solutions, LLC, the SRS management and operations contractor, have established an environmental compliance integration process that provides for the consistent flow down of requirements to projects, facilities, SRS contractors, and subcontractors as well as the upward flow of information to assist in the early identification and resolution of environmental regulatory issues and enhancement of compliance opportunities. In addition, this process strongly fosters teamwork to collaboratively resolve complex regulatory challenges, promote pollution prevention and waste minimization opportunities to advance site missions in a manner that balances near-term actions with the long-term site vision, while being protective of human health and the environment. Communication tools are being utilized, some with enhancements, to ensure appropriate information is communicated to all levels with environmental responsibility at SRS. SRS internal regulatory integration is accomplished through a variety of informational exchange forums (e.g., Challenges, Opportunities and Resolution (COR) Team, DOE's Joint Site Regulatory Integration Team, and the Senior Environmental Managers Council (SEMC)). SRS communications and problem-solving with the regulatory agencies have been enhanced through formation of an

Integration of Environmental Compliance at the Savannah River Site - 13024

Energy Technology Data Exchange (ETDEWEB)

Hoel, David [United States Department of Energy - Savannah River Operations Office (United States); Griffith, Michael [Savannah River Nuclear Solutions, LLC (United States)

2013-07-01

The Savannah River Site (SRS) is a large federal installation hosting diverse missions and multiple organizations with competing regulatory needs. Accordingly, there was a need to integrate environmental compliance strategies to ensure the consistent flow of information between Department of Energy-Savannah River (DOE-SR), the regulatory agencies and other interested parties. In order to meet this objective, DOE and major SRS contractors and tenants have committed to a strategy of collaboratively working together to ensure that a consistent, integrated, and fully coordinated approach to environmental compliance and regulator relationships is maintained. DOE-SR and Savannah River Nuclear Solutions, LLC, the SRS management and operations contractor, have established an environmental compliance integration process that provides for the consistent flow down of requirements to projects, facilities, SRS contractors, and subcontractors as well as the upward flow of information to assist in the early identification and resolution of environmental regulatory issues and enhancement of compliance opportunities. In addition, this process strongly fosters teamwork to collaboratively resolve complex regulatory challenges, promote pollution prevention and waste minimization opportunities to advance site missions in a manner that balances near-term actions with the long-term site vision, while being protective of human health and the environment. Communication tools are being utilized, some with enhancements, to ensure appropriate information is communicated to all levels with environmental responsibility at SRS. SRS internal regulatory integration is accomplished through a variety of informational exchange forums (e.g., Challenges, Opportunities and Resolution (COR) Team, DOE's Joint Site Regulatory Integration Team, and the Senior Environmental Managers Council (SEMC)). SRS communications and problem-solving with the regulatory agencies have been enhanced through formation

The value of environmental impact assessments

International Nuclear Information System (INIS)

Sohocki, D.D.

1996-01-01

The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

77 FR 42486 - Intent To Prepare an Integrated Water Supply Storage Reallocation Report; Environmental Impact...

Science.gov (United States)

2012-07-19

... Water Supply Storage Reallocation Report; Environmental Impact Statement for Missouri River Municipal... Policy Act of 1969 (NEPA), as amended and the 1958 Water Supply Act, as amended, the U.S. Army Corps of... purpose of the study is to determine if changes to the current allocation of storage for M&I water supply...

Environmental impact assessment and eco-friendly decision-making in civil structures.

Science.gov (United States)

Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun

2013-09-15

This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Environmental impacts of wind-energy projects

National Research Council Canada - National Science Library

Committee on Environmental Impacts of Wind Energy Projects; National Research Council; Division on Earth and Life Studies; National Research Council

2007-01-01

.... Environmental Impacts of Wind-Energy Projects offers an analysis of the environmental benefits and drawbacks of wind energy, along with an evaluation guide to aid decision-making about projects...

Research gaps related to the environmental impacts of electronic cigarettes

Science.gov (United States)

Chang, Hoshing

2014-01-01

Objective To consider the research gaps related to the environmental impacts of electronic cigarettes due to their manufacture, use and disposal. Methods Literature searches were conducted through December 2013. Studies were included in this review if they related to the environmental impacts of e-cigarettes. Results Scientific information on the environmental impacts of e-cigarette manufacturing, use and disposal is very limited. No studies formally evaluated the environmental impacts of the manufacturing process or disposal of components, including batteries. Four studies evaluated potential exposure to secondhand e-cigarette aerosol, an indication of impacts on indoor air quality. A 2010 survey of six e-cigarette models found that none of the products provided disposal instructions for spent cartridges containing nicotine. Notably, some e-cigarette manufacturers claim their e-cigarettes are ‘eco-friendly’ or ‘green’, despite the lack of any supporting data or environmental impact studies. Some authors argue that such advertising may boost sales and increase e-cigarette appeal, especially among adolescents. Conclusions Little is known about the environmental impacts of e-cigarettes, and a number of topics could be further elucidated by additional investigation. These topics include potential environmental impacts related to manufacturing, use and disposal. The environmental impacts of e-cigarette manufacturing will depend upon factory size and the nicotine extracting method used. The environmental impacts of e-cigarette use will include chemical and aerosol exposure in the indoor environment. The environmental impacts of disposal of e-cigarette cartridges (which contain residual nicotine) and disposal of e-cigarettes (which contain batteries) represent yet another environmental concern. PMID:24732165

Research gaps related to the environmental impacts of electronic cigarettes.

Science.gov (United States)

Chang, Hoshing

2014-05-01

To consider the research gaps related to the environmental impacts of electronic cigarettes due to their manufacture, use and disposal. Literature searches were conducted through December 2013. Studies were included in this review if they related to the environmental impacts of e-cigarettes. Scientific information on the environmental impacts of e-cigarette manufacturing, use and disposal is very limited. No studies formally evaluated the environmental impacts of the manufacturing process or disposal of components, including batteries. Four studies evaluated potential exposure to secondhand e-cigarette aerosol, an indication of impacts on indoor air quality. A 2010 survey of six e-cigarette models found that none of the products provided disposal instructions for spent cartridges containing nicotine. Notably, some e-cigarette manufacturers claim their e-cigarettes are 'eco-friendly' or 'green', despite the lack of any supporting data or environmental impact studies. Some authors argue that such advertising may boost sales and increase e-cigarette appeal, especially among adolescents. Little is known about the environmental impacts of e-cigarettes, and a number of topics could be further elucidated by additional investigation. These topics include potential environmental impacts related to manufacturing, use and disposal. The environmental impacts of e-cigarette manufacturing will depend upon factory size and the nicotine extracting method used. The environmental impacts of e-cigarette use will include chemical and aerosol exposure in the indoor environment. The environmental impacts of disposal of e-cigarette cartridges (which contain residual nicotine) and disposal of e-cigarettes (which contain batteries) represent yet another environmental concern.

10 CFR 51.90 - Final environmental impact statement-general.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-general. 51.90... Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.90 Final environmental impact statement—general. After receipt and consideration of comments requested pursuant to §§ 51...

Environmental impact of power generation

International Nuclear Information System (INIS)

Hester, R.E.; Harrison, R.M.

1999-01-01

A series of articles offers answers to questions on the environmental consequences and impact on man of the power generation industry. Subjects discussed in detail include: (i) acid rain and climate change and how the generators of electricity have been expected to play a role disproportionate to their deleterious contributions in improving the situation; (ii) recently adopted air quality management approaches with regard to airborne emissions from power stations and motor vehicles; (iii) the evolution of the UK power industry towards sustainability through considerations for the environment and use of resources in a liberalised market; (iv) the Best Practicable Environmental Option approach to the design and siting of power stations; (v) the environmental impact of nuclear power generation and (vi) electromagnetic fields and the possible effects on man of transmitting electricity in overhead power lines

75 FR 39527 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2010-07-09

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8991-3] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements filed 06/28/2010 through... Transportation's Federal Transit Administration (FTA) Final 20100230 filed with the Environmental Protection...

Landscape ecological assessment: a tool for integrating biodiversity issues in strategic environmental assessment and planning.

Science.gov (United States)

Mörtberg, U M; Balfors, B; Knol, W C

2007-03-01

To achieve a sustainable development, impacts on biodiversity of urbanisation, new infrastructure projects and other land use changes must be considered on landscape and regional scales. This requires that important decisions are made after a systematic evaluation of environmental impacts. Landscape ecology can provide a conceptual framework for the assessment of consequences of long-term development processes like urbanisation on biodiversity components, and for evaluating and visualising the impacts of alternative planning scenarios. The aim of this paper was to develop methods for integrating biodiversity issues in planning and strategic environmental assessment in an urbanising environment, on landscape and regional levels. In order to test developed methods, a case study was conducted in the region of Stockholm, the capital of Sweden, and the study area embraced the city centre, suburbs and peri-urban areas. Focal species were tested as indicators of habitat quality, quantity and connectivity in the landscape. Predictive modelling of habitat distribution in geographic information systems involved the modelling of focal species occurrences based on empirical data, incorporated in a landscape ecological decision support system. When habitat models were retrieved, they were applied on future planning scenarios in order to predict and assess the impacts on focal species. The scenario involving a diffuse exploitation pattern had the greatest negative impacts on the habitat networks of focal species. The scenarios with concentrated exploitation also had negative impacts, although they were possible to mitigate quite easily. The predictions of the impacts on habitats networks of focal species made it possible to quantify, integrate and visualise the effects of urbanisation scenarios on aspects of biodiversity on a landscape level.

Methodological proposal for environmental impact evaluation since different specific methods

International Nuclear Information System (INIS)

Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

1999-01-01

Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

Public participation in Malawi's environmental impact assessment ...

African Journals Online (AJOL)

Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

Methods of Environmental Impact Assessment in Colombia

Directory of Open Access Journals (Sweden)

Javier Toro Calderón

2013-10-01

Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

Environmental impact assessment of coal power plants in operation

Directory of Open Access Journals (Sweden)

Bartan Ayfer

2017-01-01

Full Text Available Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS. The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

Environmental impact assessment of coal power plants in operation

Science.gov (United States)

Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

2017-11-01

Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

78 FR 75919 - Environmental Impact Statements; Notice of Availability

Science.gov (United States)

2013-12-13

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9012-5] Environmental Impact Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements filed 12/02/2013 through... Railroad Relocation Planning and Environmental Study, Review Period Ends: 01/13/2014, Contact: John Winkle...

77 FR 49792 - Environmental Impacts Statements; Notice of Availability

Science.gov (United States)

2012-08-17

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9004-5] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 08/06/2012 Through..., USFS, CA, On Top Hazardous Fuels Reduction Project, To Disclose the Environmental Effects of a Federal...

A summary of impacts of wind power integration on power system small-signal stability

Science.gov (United States)

Yan, Lei; Wang, Kewen

2017-05-01

Wind power has been increasingly integrated into power systems over the last few decades because of the global energy crisis and the pressure on environmental protection, and the stability of the system connected with wind power is becoming more prominent. This paper summaries the research status, achievements as well as deficiencies of the research on the impact of wind power integration on power system small-signal stability. In the end, the further research needed are discussed.

Environmental economic impact assessment in China: Problems and prospects

International Nuclear Information System (INIS)

Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

2007-01-01

The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

A qualitative method proposal to improve environmental impact assessment

International Nuclear Information System (INIS)

Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

2013-01-01

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

A qualitative method proposal to improve environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Toro, Javier, E-mail: jjtoroca@unal.edu.co [Institute of Environmental Studies, National University of Colombia at Bogotá (Colombia); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Duarte, Oscar, E-mail: ogduartev@unal.edu.co [National University of Colombia at Bogotá, Department of Electrical Engineering and Electronics (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

2013-11-15

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown.

Environmental impact directory system: preliminary implementation for geothermal energy

Energy Technology Data Exchange (ETDEWEB)

Hess, F.D.; Hall, R.T.; Fullenwider, E.D.

1976-07-01

An Environmental Impact Directory System (EIDS) was proposed as a method for a computerized search of the widely distributed data files and models pertaining to energy-related environmental effects. To define the scope and content of the system, an example was prepared for the case of geothermal energy. The resulting sub-directory is known as GEIDs (Geothermal Environmental Impact Directory System). In preparing or reviewing an Environmental Impact Statement (EIS), the user may employ GEIDS as an extensive checklist to make sure he has taken into account all predictable impacts at any level of severity.

Integration of environmentally compatible soldering technologies for waste minimization

International Nuclear Information System (INIS)

Hosking, F.M.

1992-01-01

There has been a concentrated effort throughout the international microelectronics industry to phase out chlorofluorocarbon (CFC) materials and alleviate the serious problem of ozone depletion created by the release of CFCS. The development of more environmentally compatible manufacturing technologies is the cornerstone of this effort. Alternative materials and processes for cleaning and soldering have received special attention. Electronic. soldering typically utilizes rosin-based fluxes to promote solder wettability. Flux residues must be removed from the soldered parts when high product reliability is essential. Halogenated or CFC solvents have been the principle chemicals used to clean the residues. With the accelerated push to eliminate CFCs in the US by 1995, CFC-free solvents, aqueous-based cleaning, water soluble or ''no clean'' fluxes, and fluxless soldering technologies are being developed and quickly integrated into manufacturing practice. Sandia's Center for Solder Science and Technology has been ch g a variety of fluxless and alternative soldering technologies for DOE's waste minimization program. The work has focused on controlled atmosphere, laser, and ultrasonic fluxless soldering, protective metallic and organic coatings, and fluxes which have water soluble or low solids-based chemistries. With the increasing concern that Pb will also be banned from electronic soldering, Sandia has been characterizing the wetting, aging, and mechanical properties of Pb-fire solder alloys. The progress of these integrated studies will be discussed. Their impact on environmentally compatible manufacturing will be emphasized. Since there is no universal solution to the various environmental, safety, and health issues which currently face industry, the proposed technologies offer several complementary materials and processing options from which one can choose

Qualitative assessment of environmental impacts through fuzzy logic

International Nuclear Information System (INIS)

Peche G, Roberto

2008-01-01

The vagueness of many concepts usually utilized in environmental impact studies, along with frequent lack of quantitative information, suggests that fuzzy logic can be applied to carry out qualitative assessment of such impacts. This paper proposes a method for valuing environmental impacts caused by projects, based on fuzzy sets theory and methods of approximate reasoning. First, impacts must be described by a set of features. A linguistic variable is assigned to each feature, whose values are fuzzy sets. A fuzzy evaluation of environmental impacts is achieved using rule based fuzzy inference and the estimated fuzzy value of each feature. Generalized modus ponens has been the inference method. Finally, a crisp value of impact is attained by aggregation and defuzzification of all fuzzy results

Environmental impact of Converted Electrical Motorcycle

OpenAIRE

Xuan, Pek Yang; Henz, Martin; Weigl, Joerg

2013-01-01

This study explores the environmental impact of the conversion of an internal combustion engine (ICE) sports motorcycle into a converted battery-powered electric vehicle (CBEV). Zero tailpipe emissions might lead to the assumption that such an ICE-to-BEV conversion will always yield net positive environmental benefits in life cycle greenhouse gas (GHG) emissions and energy reductions, but energy inputs and materials impacts associated with the conversion of a CBEV are weighed against savings ...

41 CFR 101-25.111 - Environmental impact policy.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Environmental impact...-General Policies § 101-25.111 Environmental impact policy. (a) From time to time, Congress enacts... Environmental Policy Act of 1969 (42 U.S.C. 4321). The objective of such legislation is, among other things, the...

Integration Science and Technology of Advanced Ceramics for Energy and Environmental Applications

Science.gov (United States)

Singh, M.

2012-01-01

The discovery of new and innovative materials has been known to culminate in major turning points in human history. The transformative impact and functional manifestation of new materials have been demonstrated in every historical era by their integration into new products, systems, assemblies, and devices. In modern times, the integration of new materials into usable products has a special relevance for the technological development and economic competitiveness of industrial societies. Advanced ceramic technologies dramatically impact the energy and environmental landscape due to potential wide scale applications in all aspects of energy production, storage, distribution, conservation, and efficiency. Examples include gas turbine propulsion systems, fuel cells, thermoelectrics, photovoltaics, distribution and transmission systems based on superconductors, nuclear power generation, and waste disposal. Robust ceramic integration technologies enable hierarchical design and manufacturing of intricate ceramic components starting with geometrically simpler units that are subsequently joined to themselves and/or to metals to create components with progressively higher levels of complexity and functionality. However, for the development of robust and reliable integrated systems with optimum performance under different operating conditions, the detailed understanding of various thermochemical and thermomechanical factors is critical. Different approaches are required for the integration of ceramic-metal and ceramic-ceramic systems across length scales (macro to nano). In this presentation, a few examples of integration of ceramic to metals and ceramic to ceramic systems will be presented. Various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Potential opportunities and need for the development of innovative design philosophies, approaches, and

INEL Waste and Environmental Information Integration Project approach and concepts

International Nuclear Information System (INIS)

Dean, L.A.; Fairbourn, P.J.; Randall, V.C.; Riedesel, A.M.

1994-06-01

The Idaho National Engineering, Laboratory (INEL) Waste and Environmental Information integration Project (IWEIIP) was established in December 1993 to address issues related to INEL waste and environmental information including: Data quality; Data redundancy; Data accessibility; Data integration. This effort includes existing information, new development, and acquisition activities. Existing information may not be a database record; it may be an entire document (electronic, scanned, or hard-copy), a video clip, or a file cabinet of information. The IWEIIP will implement an effective integrated information framework to manage INEL waste and environmental information as an asset. This will improve data quality, resolve data redundancy, and increase data accessibility; therefore, providing more effective utilization of the dollars spent on waste and environmental information

Environmental impact statements: new legal technique for environmental protection

Energy Technology Data Exchange (ETDEWEB)

Baldwin, M F

1975-02-01

The National Environmental Policy Act (NEPA) has required Federal agencies to re-examine all their programs affecting the environment, to consider alternative policies, to coordinate their actions with other agencies, and to disclose their environmental analyses to the public. In short, it has attempted to change decision processes markedly, in order to respond to wide-spread public concern about a deteriorating natural and human environment. The mandates of the policy are listed, but knowing that these were not sufficient to change existing agency practices, Congress established what has been called an ''action-forcing mechanism.'' Each federal agency must ''include in every recommendation or report on proposals for legislation and other major federal actions significantly affecting the quality of the human environment, a detailed statement by the responsible official.'' This statement must cover the following five points as specified in Section 102(2)(c): the environmental impact of the proposed action; any adverse environmental effects which cannot be avoided should the proposal be implemented; alternatives to the proposed action; the relationship between local and short-term uses of man's environment and the maintenance and enhancement of long-term productivity, and any irreversible and irretrievable commitments of resources which would be involved in the proposed action should it be implemented. Section 102 has been considered the heart of the National Environmental Policy Act. The specific five-point environmental report--known as an environmental impact statement--is the visible evidence of an agency's compliance with the environmental policy articulated by Congress. (MCW)

Glocal assessment of integrated wastewater treatment and recovery concepts using partial nitritation/Anammox and microalgae for environmental impacts.

Science.gov (United States)

Khiewwijit, Rungnapha; Rijnaarts, Huub; Temmink, Hardy; Keesman, Karel J

2018-07-01

This study explored the feasibility and estimated the environmental impacts of two novel wastewater treatment configurations. Both include combined bioflocculation and anaerobic digestion but apply different nutrient removal technologies, i.e. partial nitritation/Anammox or microalgae treatment. The feasibility of such configurations was investigated for 16 locations worldwide with respect to environmental impacts, such as net energy yield, nutrient recovery and effluent quality, CO 2 emission, and area requirements. The results quantitatively support the applicability of partial nitritation/Anammox in tropical regions and some locations in temperate regions, whereas microalgae treatment is only applicable the whole year round in tropical regions that are close to the equator line. Microalgae treatment has an advantage over the configuration with partial nitritation/Anammox with respect to aeration energy and nutrient recovery, but not with area requirements. Differential sensitivity analysis points out the dominant influence of microalgal biomass yield and wastewater nutrient concentrations on area requirements and effluent quality. This study provides initial selection criteria for worldwide feasibility and corresponding environmental impacts of these novel municipal wastewater treatment plant configurations. Copyright © 2018. Published by Elsevier B.V.

Ports Primer: 7.1 Environmental Impacts

Science.gov (United States)

Port operations can lead to environmental impacts on air, water and land. Many communities with environmental justice concerns also experience disparities in health outcomes that they attribute to exposure to emissions from port operations.

Ports Primer: 7.0 Environmental Impacts

Science.gov (United States)

Port operations can lead to environmental impacts on air, water and land. Many communities with environmental justice concerns also experience disparities in health outcomes that they attribute to exposure to emissions from port operations.

10 CFR 51.80 - Draft environmental impact statement-materials license.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

43 CFR 46.445 - Preparing a legislative environmental impact statement.

Science.gov (United States)

2010-10-01

... IMPLEMENTATION OF THE NATIONAL ENVIRONMENTAL POLICY ACT OF 1969 Environmental Impact Statements § 46.445 Preparing a legislative environmental impact statement. When required under 40 CFR 1506.8, the Department must ensure that a legislative environmental impact statement is included as a part of the formal...

Clarifying the Imperative of Integration Research for Sustainable Environmental Management

Directory of Open Access Journals (Sweden)

Stephen Dovers

2005-01-01

Full Text Available This paper discusses why integration is important in doing research for developing policy and practice of sustainable environmental management. The imperative of integration includes environmental, social, economic, and other disciplinary considerations, as well as stakeholder interests. However, what is meant by integration is not always clear. While the imperative is being increasingly enunciated, the challenges it presents are difficult and indicate a long term pursuit. This paper clarifies the different dimensions of integration, as an important preliminary step toward advancing mutual understanding and the development of approaches. The paper identifies the driving forces for integration, discusses when integration is required, categorises forms of integration, and proposes principles to inform research programs and projects.

33 CFR 230.13 - Environmental Impact Statement (EIS).

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Environmental Impact Statement..., DEPARTMENT OF DEFENSE PROCEDURES FOR IMPLEMENTING NEPA § 230.13 Environmental Impact Statement (EIS). An EIS... issues and impacts. The transmittal letter to EPA as well as the cover sheet should clearly identify the...

Modelling future impacts of air pollution using the multi-scale UK Integrated Assessment Model (UKIAM).

Science.gov (United States)

Oxley, Tim; Dore, Anthony J; ApSimon, Helen; Hall, Jane; Kryza, Maciej

2013-11-01

Integrated assessment modelling has evolved to support policy development in relation to air pollutants and greenhouse gases by providing integrated simulation tools able to produce quick and realistic representations of emission scenarios and their environmental impacts without the need to re-run complex atmospheric dispersion models. The UK Integrated Assessment Model (UKIAM) has been developed to investigate strategies for reducing UK emissions by bringing together information on projected UK emissions of SO2, NOx, NH3, PM10 and PM2.5, atmospheric dispersion, criteria for protection of ecosystems, urban air quality and human health, and data on potential abatement measures to reduce emissions, which may subsequently be linked to associated analyses of costs and benefits. We describe the multi-scale model structure ranging from continental to roadside, UK emission sources, atmospheric dispersion of emissions, implementation of abatement measures, integration with European-scale modelling, and environmental impacts. The model generates outputs from a national perspective which are used to evaluate alternative strategies in relation to emissions, deposition patterns, air quality metrics and ecosystem critical load exceedance. We present a selection of scenarios in relation to the 2020 Business-As-Usual projections and identify potential further reductions beyond those currently being planned. © 2013.

Environmental impact assessment in the Nordic Countries

International Nuclear Information System (INIS)

Broden, K.; Palsson, S.E.; Poroddsson, P.

2000-12-01

A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

Assessment of transportation risk for the U.S. Department of Energy Environmental Management programmatic environmental impact statement

International Nuclear Information System (INIS)

Chen, S.Y.; Monette, F.A.; Biwer, B.M.; Lazaro, M.A.; Hartmann, H.M.; Policastro, A.J.

1995-01-01

In its Programmatic Environmental Impact Statement (PEIS), the Office of Environmental Management (EM) of the U.S. Department of Energy (DOE) is considering a broad range of alternatives for the future management of radioactive and hazardous waste at the facilities of the DOE complex. The alternatives involve facilities to be used for treatment, storage, and disposal of various wastes generated from DOE environmental restoration activities and waste management operations. The evaluation includes five types of waste (four types of radioactive waste plus hazardous waste), 49 sites, and numerous cases associated with each alternative for waste management. In general, the alternatives are evaluated independently for each type of waste and reflect decentralized, regionalized, and centralized approaches. Transportation of waste materials is an integral component of the EM PEIS alternatives for waste management. The estimated impact on human health that is associated with various waste transportation activities is an important component of a complete appraisal of the alternatives. The transportation risk assessment performed for the EM PEIS is designed to ensure through uniform and judicious selection of models, data, and assumptions that relative comparisons of risk among the various alternatives are meaningful and consistent. Among other tasks, Argonne National Laboratory is providing technical assistance to the EM PEIS on transportation risk assessment. The objective is to perform a human health risk assessment for each type of waste relative to the EM PEIS alternatives for waste management. The transportation risk assessed is part of the overall impacts being analyzed for the EM PEIS to determine the safest, most environmentally and economically sound manner in which to satisfy requirements for waste management in the coming decades

Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services.

Science.gov (United States)

Gilioli, G; Schrader, G; Baker, R H A; Ceglarska, E; Kertész, V K; Lövei, G; Navajas, M; Rossi, V; Tramontini, S; van Lenteren, J C

2014-01-15

The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose. By including both the structural and functional components of the environment threatened by invasive alien species (IAS), in particular plant pests, we propose an environmental risk assessment scheme that addresses this complexity. Structural components are investigated by evaluating the impacts of the plant pest on genetic, species and landscape diversity. Functional components are evaluated by estimating how plant pests modify ecosystem services in order to determine the extent to which an IAS changes the functional traits that influence ecosystem services. A scenario study at a defined spatial and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive citrus long-horn beetle, Anoplophora chinensis. © 2013.

Integrating Environmental and Socio-Economic Indicators of a Linked Catchment-Coastal System Using Variable Environmental Intensity

Science.gov (United States)

Dymond, John R.; Davie, Tim J. A.; Fenemor, Andrew D.; Ekanayake, Jagath C.; Knight, Ben R.; Cole, Anthony O.; de Oca Munguia, Oscar Montes; Allen, Will J.; Young, Roger G.; Basher, Les R.; Dresser, Marc; Batstone, Chris J.

2010-09-01

Can we develop land use policy that balances the conflicting views of stakeholders in a catchment while moving toward long term sustainability? Adaptive management provides a strategy for this whereby measures of catchment performance are compared against performance goals in order to progressively improve policy. However, the feedback loop of adaptive management is often slow and irreversible impacts may result before policy has been adapted. In contrast, integrated modelling of future land use policy provides rapid feedback and potentially improves the chance of avoiding unwanted collapse events. Replacing measures of catchment performance with modelled catchment performance has usually required the dynamic linking of many models, both biophysical and socio-economic—and this requires much effort in software development. As an alternative, we propose the use of variable environmental intensity (defined as the ratio of environmental impact over economic output) in a loose coupling of models to provide a sufficient level of integration while avoiding significant effort required for software development. This model construct was applied to the Motueka Catchment of New Zealand where several biophysical (riverine water quantity, sediment, E. coli faecal bacteria, trout numbers, nitrogen transport, marine productivity) models, a socio-economic (gross output, gross margin, job numbers) model, and an agent-based model were linked. An extreme set of land use scenarios (historic, present, and intensive) were applied to this modelling framework. Results suggest that the catchment is presently in a near optimal land use configuration that is unlikely to benefit from further intensification. This would quickly put stress on water quantity (at low flow) and water quality ( E. coli). To date, this model evaluation is based on a theoretical test that explores the logical implications of intensification at an unlikely extreme in order to assess the implications of likely growth

77 FR 26578 - Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meeting for...

Science.gov (United States)

2012-05-04

...The Bureau of Reclamation and the San Joaquin River Exchange Contractors Water Authority have made available for public review and comment the joint draft environmental impact statement/environmental impact report (Draft EIS/EIR) for the Water Transfer Program, 2014- 2038. The proposed new transfer program would provide for the transfer and/or exchange of up to 150,000 acre-feet of substitute water from the San Joaquin River Exchange Contractors Water Authority to several potential users over a 25-year timeframe (water service years 2014- 2038).

Evaluation of environmental impact predictions

International Nuclear Information System (INIS)

Cunningham, P.A.; Adams, S.M.; Kumar, K.D.

1977-01-01

An analysis and evaluation of the ecological monitoring program at the Surry Nuclear Power Plant showed that predictions of potential environmental impact made in the Final Environmental Statement (FES), which were based on generally accepted ecological principles, were not completely substantiated by environmental monitoring data. The Surry Nuclear Power Plant (Units 1 and 2) was chosen for study because of the facility's relatively continuous operating history and the availability of environmental data adequate for analysis. Preoperational and operational fish monitoring data were used to assess the validity of the FES prediction that fish would congregate in the thermal plume during winter months and would avoid the plume during summer months. Analysis of monitoring data showed that fish catch per unit effort (CPE) was generally high in the thermal plume during winter months; however, the highest fish catches occurred in the plume during the summer. Possible explanations for differences between the FES prediction and results observed in analysis of monitoring data are discussed, and general recommendations are outlined for improving impact assessment predictions

Environmental impact assessment of abnormal events: a follow-up study

International Nuclear Information System (INIS)

Hunsaker, D.B. Jr.; Lee, D.W.

1985-01-01

Impact analyses included in environmental assessments for a selected nuclear power plant, petroleum storage facility, crude oil pipeline, and geopressure well that have experienced operational, abnormal events are compared with the data quantifying the environmental impacts of the events. Comparisons of predicted vs actual impacts suggests that prediction of the types of events and associated impacts could be improved; in some instances, impacts have been underestimated. Analysis of abnormal events is especially important in environmental assessment documents addressing a technology that is novel or unique to a particular area. Incorporation of abnormal event impact analysis into project environmental monitoring and emergency response plans can help improve these plans and can help reduce the magnitude of environmental impacts resulting from said events

18 CFR 380.7 - Format of an environmental impact statement.

Science.gov (United States)

2010-04-01

... environmental impact statement. 380.7 Section 380.7 Conservation of Power and Water Resources FEDERAL ENERGY... ENVIRONMENTAL POLICY ACT § 380.7 Format of an environmental impact statement. In addition to the requirements for an environmental impact statement prescribed in 40 CFR 1502.10 of the regulations of the Council...

Environmental Modeling and Bayesian Analysis for Assessing Human Health Impacts from Radioactive Waste Disposal

Science.gov (United States)

Stockton, T.; Black, P.; Tauxe, J.; Catlett, K.

2004-12-01

Bayesian decision analysis provides a unified framework for coherent decision-making. Two key components of Bayesian decision analysis are probability distributions and utility functions. Calculating posterior distributions and performing decision analysis can be computationally challenging, especially for complex environmental models. In addition, probability distributions and utility functions for environmental models must be specified through expert elicitation, stakeholder consensus, or data collection, all of which have their own set of technical and political challenges. Nevertheless, a grand appeal of the Bayesian approach for environmental decision- making is the explicit treatment of uncertainty, including expert judgment. The impact of expert judgment on the environmental decision process, though integral, goes largely unassessed. Regulations and orders of the Environmental Protection Agency, Department Of Energy, and Nuclear Regulatory Agency orders require assessing the impact on human health of radioactive waste contamination over periods of up to ten thousand years. Towards this end complex environmental simulation models are used to assess "risk" to human and ecological health from migration of radioactive waste. As the computational burden of environmental modeling is continually reduced probabilistic process modeling using Monte Carlo simulation is becoming routinely used to propagate uncertainty from model inputs through model predictions. The utility of a Bayesian approach to environmental decision-making is discussed within the context of a buried radioactive waste example. This example highlights the desirability and difficulties of merging the cost of monitoring, the cost of the decision analysis, the cost and viability of clean up, and the probability of human health impacts within a rigorous decision framework.

Environmental impact statement requirements for CNEA

International Nuclear Information System (INIS)

Ciurciolo, Melisa N.; Mender, J. A.

2009-01-01

The purpose of this paper is to describe the legal framework on Environmental Impact Assessment (EIA) regarding the activities of the National Atomic Energy Commission (Comision Nacional de Energia Atomica, CNEA), and particularly, the Procedure for Internal Management of Environmental Impact Statements of CNEA (PN-PR-027). According to the distribution of powers stated in article 41 of the National Constitution, the environmental legal framework is constituted by National minimum standards for environmental protection and complementary provincial and municipal regulations. As a result, the EIA legal framework is not uniform across the Nation, and therefore, it differs according to the jurisdiction in which the activity subject to EIA is developed. Notwithstanding, the General Statute of the Environment (25.675) requires EIA for any project or activity developed in the National territory, which may cause a significant degradation to the environment, any of its components, or affect the populations' quality of life in a significant way. Since CNEA develops activities along the National territory, it is not possible to determine a uniform legal EIA framework for the entire Institution. Consequently, the binding requirements for Environmental Impact Statements (EISs) of CNEA activities differ among the activities developed in the different locations and atomic centers. In order to achieve a uniform environmental performance in CNEA, it has been considered necessary to uniform, in the internal sphere, the binding requirements for EIS, by means of a procedure written within the framework of the Environmental Management System of the Institution. The purpose of the Procedure for Internal Management of Environmental Impact Statements is to determine the requirements to be complied by the atomic centers, locations and enterprises associated with CNEA, regarding EIS Management. This Procedure shall apply to those projects and activities subjected to EIA, according to a

Resource Programs: Final Environmental Impact Statement

International Nuclear Information System (INIS)

1993-02-01

Every two years, BA prepares a Resource Program, which identifies the resource actions BA will take to meet its obligation to serve the forecasted power requirements of its customers. The Resource Programs Environmental Impact Statement (RPEIS) is a programmatic environmental document that will support decisions made in several future Resource Programs. Environmental documents tiered to this EIS may be prepared on a site-specific basis. The RPEIS includes a description of the environmental effects and mitigation for the various resource types available in order to evaluate the trade-offs among them. It also assesses the environmental impacts of adding thirteen alternative combinations of resources to the existing power system. The alternatives represent the range of actions BA could take to meet its load obligations. Each of the alternatives allows BA to meet the almost 5,000 average megawatt load increase that could occur with high load growth, or an equivalent need for resources caused by a combination of load growth and any future loss of resources

Evaluating environmental policy integration and policy coherence across service sectors: The case of South Africa’s inland water biodiversity

CSIR Research Space (South Africa)

Funke, Nicola S

2009-01-01

Full Text Available the inclusion of the systematic conservation of inland water ecosystems in the strategic planning processes of several sectors impacting on South Africa’s inland water biodiversity. The authors use environmental policy integration (EPI) research approach...

An environmental impact measure for nuclear fuel cycle evaluation

International Nuclear Information System (INIS)

Ahn, Joonhong

2004-01-01

Review of the models and measures for repository performance assessment has revealed that dedicated measures for environmental impacts need to be developed for the purpose of nuclear-fuel-cycle evaluation from the viewpoint of environmental impact minimization. The present study proposes the total toxicity index of released radionuclides that have accumulated in the region exterior to the repository as an environmental impact measure. The measure is quantitatively evaluated by a radionuclide transport model that incorporates the effects of canister-array configuration and the initial mass loading in the waste canister. With the measure, it is demonstrated that the environmental impact of the repository can be effectively reduced by reduction of the initial mass loading and change in the canister-array configuration in the repository. Environmental impacts of the mill tailings and the depleted uranium are as important as those from the high-level radioactive wastes repository. For a fair comparison of various fuel cycles, the sum of these impacts should be compared. (author)

Life cycle energy efficiency and environmental impact assessment of bioethanol production from sweet potato based on different production modes

Science.gov (United States)

Zhang, Jun; Jia, Chunrong; Wu, Yi; Xi, Beidou; Wang, Lijun; Zhai, Youlong

2017-01-01

The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production. PMID:28672044

10 CFR 51.94 - Requirement to consider final environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Requirement to consider final environmental impact...-Regulations Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.94 Requirement to consider final environmental impact statement. The final environmental impact statement...

Environmental impacts of divorce

OpenAIRE

Yu, Eunice; Liu, Jianguo

2007-01-01

Divorce is increasingly common around the world. Its causes, dynamics, and socioeconomic impacts have been widely studied, but little research has addressed its environmental impacts. We found that average household size (number of people in a household) in divorced households (households with divorced heads) was 27–41% smaller than married households (households with married heads) in 12 countries across the world around the year 2000 (between 1998 and 2002). If divorced households had combi...

Research gaps related to the environmental impacts of electronic cigarettes

OpenAIRE

Chang, Hoshing

2014-01-01

Objective To consider the research gaps related to the environmental impacts of electronic cigarettes due to their manufacture, use and disposal. Methods Literature searches were conducted through December 2013. Studies were included in this review if they related to the environmental impacts of e-cigarettes. Results Scientific information on the environmental impacts of e-cigarette manufacturing, use and disposal is very limited. No studies formally evaluated the environmental impacts of the...

Geospatial Technology In Environmental Impact Assessments – Retrospective.

Directory of Open Access Journals (Sweden)

Goparaju Laxmi

2015-10-01

Full Text Available Environmental Impact Assessments are studies conducted to give us an insight into the various impacts caused by an upcoming industry or any developmental activity. It should address various social, economic and environmental issues ensuring that negative impacts are mitigated. In this context, geospatial technology has been used widely in recent times.

10 CFR 51.118 - Final environmental impact statement-notice of availability.