Multi-agent based distributed control architecture for microgrid energy management and optimization

International Nuclear Information System (INIS)

Basir Khan, M. Reyasudin; Jidin, Razali; Pasupuleti, Jagadeesh

2016-01-01

Highlights: • A new multi-agent based distributed control architecture for energy management. • Multi-agent coordination based on non-cooperative game theory. • A microgrid model comprised of renewable energy generation systems. • Performance comparison of distributed with conventional centralized control. - Abstract: Most energy management systems are based on a centralized controller that is difficult to satisfy criteria such as fault tolerance and adaptability. Therefore, a new multi-agent based distributed energy management system architecture is proposed in this paper. The distributed generation system is composed of several distributed energy resources and a group of loads. A multi-agent system based decentralized control architecture was developed in order to provide control for the complex energy management of the distributed generation system. Then, non-cooperative game theory was used for the multi-agent coordination in the system. The distributed generation system was assessed by simulation under renewable resource fluctuations, seasonal load demand and grid disturbances. The simulation results show that the implementation of the new energy management system proved to provide more robust and high performance controls than conventional centralized energy management systems.

Facies and facies architecture and depositional environments of the ...

African Journals Online (AJOL)

Facies and facies architecture and depositional environments of the ... PROMOTING ACCESS TO AFRICAN RESEARCH ... Depositional environments of the Yolde Formation were studied based on the analysis of facies and facies architecture. ... Senegal (6); Sierra Leone (1); South Africa (96); South Sudan (1); Sudan (3) ...

Energy-aware architecture for multi-rate ad hoc networks

Directory of Open Access Journals (Sweden)

Ahmed Yahya

2010-06-01

Full Text Available The backbone of ad hoc network design is energy performance and bandwidth resources limitations. Multi-rate adaptation architectures have been proposed to reduce the control overhead and to increase bandwidth utilization efficiency. In this paper, we propose a multi-rate protocol to provide the highest network performance under very low control overhead. The efficiency of the proposed auto multi-rate protocol is validated extensive simulations using QualNet network simulator. The simulation results demonstrate that our solution significantly improves the overall network performance.

ADILE: Architecture of a database-supported learning environment

NARCIS (Netherlands)

Hiddink, G.W.

2001-01-01

This article proposes an architecture for distributed learning environments that use databases to store learning material. As the layout of learning material can inhibit reuse, the ar-chitecture implements the notion of "separation of layout and structure" using XML technology. Also, the

Software defined radio (SDR) architecture for concurrent multi-satellite communications

Science.gov (United States)

Maheshwarappa, Mamatha R.

SDRs have emerged as a viable approach for space communications over the last decade by delivering low-cost hardware and flexible software solutions. The flexibility introduced by the SDR concept not only allows the realisation of concurrent multiple standards on one platform, but also promises to ease the implementation of one communication standard on differing SDR platforms by signal porting. This technology would facilitate implementing reconfigurable nodes for parallel satellite reception in Mobile/Deployable Ground Segments and Distributed Satellite Systems (DSS) for amateur radio/university satellite operations. This work outlines the recent advances in embedded technologies that can enable new communication architectures for concurrent multi-satellite or satellite-to-ground missions where multi-link challenges are associated. This research proposes a novel concept to run advanced parallelised SDR back-end technologies in a Commercial-Off-The-Shelf (COTS) embedded system that can support multi-signal processing for multi-satellite scenarios simultaneously. The initial SDR implementation could support only one receiver chain due to system saturation. However, the design was optimised to facilitate multiple signals within the limited resources available on an embedded system at any given time. This was achieved by providing a VHDL solution to the existing Python and C/C++ programming languages along with parallelisation so as to accelerate performance whilst maintaining the flexibility. The improvement in the performance was validated at every stage through profiling. Various cases of concurrent multiple signals with different standards such as frequency (with Doppler effect) and symbol rates were simulated in order to validate the novel architecture proposed in this research. Also, the architecture allows the system to be reconfigurable by providing the opportunity to change the communication standards in soft real-time. The chosen COTS solution provides a

Tinuso: A processor architecture for a multi-core hardware simulation platform

DEFF Research Database (Denmark)

Schleuniger, Pascal; Karlsson, Sven

2010-01-01

Multi-core systems have the potential to improve performance, energy and cost properties of embedded systems but also require new design methods and tools to take advantage of the new architectures. Due to the limited accuracy and performance of pure software simulators, we are working on a cycle...... accurate hardware simulation platform. We have developed the Tinuso processor architecture for this platform. Tinuso is a processor architecture optimized for FPGA implementation. The instruction set makes use of predicated instructions and supports C/C++ and assembly language programming. It is designed...... to be easy extendable to maintain the exibility required for the research on multi-core systems. Tinuso contains a co-processor interface to connect to a network interface. This interface allow for communication over an on-chip network. A clock frequency estimation study on a deeply pipelined Tinuso...

An Intelligent Agent based Architecture for Visual Data Mining

OpenAIRE

Hamdi Ellouzi; Hela Ltifi; Mounir Ben Ayed

2016-01-01

the aim of this paper is to present an intelligent architecture of Decision Support System (DSS) based on visual data mining. This architecture applies the multi-agent technology to facilitate the design and development of DSS in complex and dynamic environment. Multi-Agent Systems add a high level of abstraction. To validate the proposed architecture, it is implemented to develop a distributed visual data mining based DSS to predict nosocomial infectionsoccurrence in intensive care units. Th...

Enhanced risk management by an emerging multi-agent architecture

Science.gov (United States)

Lin, Sin-Jin; Hsu, Ming-Fu

2014-07-01

Classification in imbalanced datasets has attracted much attention from researchers in the field of machine learning. Most existing techniques tend not to perform well on minority class instances when the dataset is highly skewed because they focus on minimising the forecasting error without considering the relative distribution of each class. This investigation proposes an emerging multi-agent architecture, grounded on cooperative learning, to solve the class-imbalanced classification problem. Additionally, this study deals further with the obscure nature of the multi-agent architecture and expresses comprehensive rules for auditors. The results from this study indicate that the presented model performs satisfactorily in risk management and is able to tackle a highly class-imbalanced dataset comparatively well. Furthermore, the knowledge visualised process, supported by real examples, can assist both internal and external auditors who must allocate limited detecting resources; they can take the rules as roadmaps to modify the auditing programme.

Smart environment architecture for emotion detection and regulation.

Science.gov (United States)

Fernández-Caballero, Antonio; Martínez-Rodrigo, Arturo; Pastor, José Manuel; Castillo, José Carlos; Lozano-Monasor, Elena; López, María T; Zangróniz, Roberto; Latorre, José Miguel; Fernández-Sotos, Alicia

2016-12-01

This paper introduces an architecture as a proof-of-concept for emotion detection and regulation in smart health environments. The aim of the proposal is to detect the patient's emotional state by analysing his/her physiological signals, facial expression and behaviour. Then, the system provides the best-tailored actions in the environment to regulate these emotions towards a positive mood when possible. The current state-of-the-art in emotion regulation through music and colour/light is implemented with the final goal of enhancing the quality of life and care of the subject. The paper describes the three main parts of the architecture, namely "Emotion Detection", "Emotion Regulation" and "Emotion Feedback Control". "Emotion Detection" works with the data captured from the patient, whereas "Emotion Regulation" offers him/her different musical pieces and colour/light settings. "Emotion Feedback Control" performs as a feedback control loop to assess the effect of emotion regulation over emotion detection. We are currently testing the overall architecture and the intervention in real environments to achieve our final goal. Copyright © 2016 Elsevier Inc. All rights reserved.

Controllable 3D architectures of aligned carbon nanotube arrays by multi-step processes

Science.gov (United States)

Huang, Shaoming

2003-06-01

An effective way to fabricate large area three-dimensional (3D) aligned CNTs pattern based on pyrolysis of iron(II) phthalocyanine (FePc) by two-step processes is reported. The controllable generation of different lengths and selective growth of the aligned CNT arrays on metal-patterned (e.g., Ag and Au) substrate are the bases for generating such 3D aligned CNTs architectures. By controlling experimental conditions 3D aligned CNT arrays with different lengths/densities and morphologies/structures as well as multi-layered architectures can be fabricated in large scale by multi-step pyrolysis of FePc. These 3D architectures could have interesting properties and be applied for developing novel nanotube-based devices.

SNAVA-A real-time multi-FPGA multi-model spiking neural network simulation architecture.

Science.gov (United States)

Sripad, Athul; Sanchez, Giovanny; Zapata, Mireya; Pirrone, Vito; Dorta, Taho; Cambria, Salvatore; Marti, Albert; Krishnamourthy, Karthikeyan; Madrenas, Jordi

2018-01-01

Spiking Neural Networks (SNN) for Versatile Applications (SNAVA) simulation platform is a scalable and programmable parallel architecture that supports real-time, large-scale, multi-model SNN computation. This parallel architecture is implemented in modern Field-Programmable Gate Arrays (FPGAs) devices to provide high performance execution and flexibility to support large-scale SNN models. Flexibility is defined in terms of programmability, which allows easy synapse and neuron implementation. This has been achieved by using a special-purpose Processing Elements (PEs) for computing SNNs, and analyzing and customizing the instruction set according to the processing needs to achieve maximum performance with minimum resources. The parallel architecture is interfaced with customized Graphical User Interfaces (GUIs) to configure the SNN's connectivity, to compile the neuron-synapse model and to monitor SNN's activity. Our contribution intends to provide a tool that allows to prototype SNNs faster than on CPU/GPU architectures but significantly cheaper than fabricating a customized neuromorphic chip. This could be potentially valuable to the computational neuroscience and neuromorphic engineering communities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture.

Science.gov (United States)

Zheng, Song; Zhang, Qi; Zheng, Rong; Huang, Bi-Qin; Song, Yi-Lin; Chen, Xin-Chu

2017-09-16

In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome) based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

Science.gov (United States)

Zheng, Song; Zhang, Qi; Zheng, Rong; Huang, Bi-Qin; Song, Yi-Lin; Chen, Xin-Chu

2017-01-01

In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome) based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices. PMID:28926957

Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

Directory of Open Access Journals (Sweden)

Song Zheng

2017-09-01

Full Text Available In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography.

Science.gov (United States)

Reddy, Alavalapati Goutham; Das, Ashok Kumar; Odelu, Vanga; Yoo, Kee-Young

2016-01-01

Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.'s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN) logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

Innovative architecture design for high performance organic and hybrid multi-junction solar cells

Science.gov (United States)

Li, Ning; Spyropoulos, George D.; Brabec, Christoph J.

2017-08-01

The multi-junction concept is especially attractive for the photovoltaic (PV) research community owing to its potential to overcome the Schockley-Queisser limit of single-junction solar cells. Tremendous research interests are now focused on the development of high-performance absorbers and novel device architectures for emerging PV technologies, such as organic and perovskite PVs. It has been predicted that the multi-junction concept is able to boost the organic and perovskite PV technologies approaching the 20% and 30% benchmarks, respectively, showing a bright future of commercialization of the emerging PV technologies. In this contribution, we will demonstrate innovative architecture design for solution-processed, highly functional organic and hybrid multi-junction solar cells. A simple but elegant approach to fabricating organic and hybrid multi-junction solar cells will be introduced. By laminating single organic/hybrid solar cells together through an intermediate layer, the manufacturing cost and complexity of large-scale multi-junction solar cells can be significantly reduced. This smart approach to balancing the photocurrents as well as open circuit voltages in multi-junction solar cells will be demonstrated and discussed in detail.

Teaching Architecture - Contemporary Challenges and Threats in the Complexity of Built Environment

Science.gov (United States)

Borucka, Justyna; Macikowski, Bartosz

2017-10-01

The complexity of the modern built environment is a problem not only of architectural and urban issues. This issue extends to many other disciplines as well as covering a wide range of social engagements. The idea of writing this paper is generally initiated by the debate which took place in Gdańsk on 22.01.2016, and was prepared in order to meet representatives of the four circles of interest within the architectural sphere: universities, professional architectural organisations and associations, architectural practice (professionals running their own studios, managing projects and leading construction) and local social organisations active in city of Gdańsk. This paper is a comparison of the results of this discussion in relation to the policy and methodology of architecture teaching on the University level. Teaching architecture and urban planning according to the present discussion needs to be improved and advanced to meet the increasing complexity of both disciplines. Contemporary dynamic development of cities creates the necessity of engaging multiple stakeholders, participants and users of architecture and urban space. This is crucial to make them conscious of sharing responsibility for increasing the quality of living in the built environment. This discussion about architectural education is open and has the nature of an ongoing process adapting to a changing environment and is in fact a constant challenge which brings questions rather than simple answers. Transformation of architecture and urban planning, and consequently its education are increasingly entering into the related fields, especially into the professional practice and social environment. The question of how to teach architecture and urban planning and educate users of urban space should take place in the context of a wide discussion. This interdisciplinary debate seems to be a crucial and challenging step towards improving the future education of architecture and urban planning leading to a

Software Architecture Design for Spatially-Indexed Media in Smart Environments

Directory of Open Access Journals (Sweden)

SCHIPOR, O.-A.

2017-05-01

Full Text Available We introduce in this work a new software architecture design, based on well-established web communication protocols and scripting languages, for implementing spatially-indexed media in smart environments. We based our approach on specific design guidelines. Our concept of spatially-indexed media enables users to readily instantiate mappings between digital content and specific regions of the physical space. We present an implementation of the architecture using a motion capture system, a large visualization display, and several smart devices. We also present an experimental evaluation of our new software architecture by reporting response times function of changes in the complexity of physical-digital environment.

Modern Conditions and the Impacts of the Creation of Architectural Environment

Science.gov (United States)

Abyzov, Vadym

2017-10-01

The purpose of this research is an attempt to identify and analyse the modern conditions and impacts of the creation of architectural environment and on this basis to determine the main directions and tasks of the development of architecture at the appropriate hierarchical levels. A comprehensive review and structural analysis of all impact factors and different current conditions that lead to the sustainable architecture design are conducted in the proposal. The main groups of factors and conditions such as social-economical, natural-geographic, urban, ergonomics, ecological, typological, technical, cultural, and aesthetics are determined in accordance with their contemporary specifics. This analysis provides an opportunity to define the appropriative hierarchical levels of the modern trends and prospects of creation an effective, attractive and friendly architectural environment. Some examples of author’s projects and implementations is presented in the article. Such methodological approach will help to create a holistic view of the creation architectural environment, will allow to systematize existing knowledges and concepts, practices and prospects of the means and methods of its formation and development.

Software Defined Networking (SDN) controlled all optical switching networks with multi-dimensional switching architecture

Science.gov (United States)

Zhao, Yongli; Ji, Yuefeng; Zhang, Jie; Li, Hui; Xiong, Qianjin; Qiu, Shaofeng

2014-08-01

Ultrahigh throughout capacity requirement is challenging the current optical switching nodes with the fast development of data center networks. Pbit/s level all optical switching networks need to be deployed soon, which will cause the high complexity of node architecture. How to control the future network and node equipment together will become a new problem. An enhanced Software Defined Networking (eSDN) control architecture is proposed in the paper, which consists of Provider NOX (P-NOX) and Node NOX (N-NOX). With the cooperation of P-NOX and N-NOX, the flexible control of the entire network can be achieved. All optical switching network testbed has been experimentally demonstrated with efficient control of enhanced Software Defined Networking (eSDN). Pbit/s level all optical switching nodes in the testbed are implemented based on multi-dimensional switching architecture, i.e. multi-level and multi-planar. Due to the space and cost limitation, each optical switching node is only equipped with four input line boxes and four output line boxes respectively. Experimental results are given to verify the performance of our proposed control and switching architecture.

System Engineering Strategy for Distributed Multi-Purpose Simulation Architectures

Science.gov (United States)

Bhula, Dlilpkumar; Kurt, Cindy Marie; Luty, Roger

2007-01-01

This paper describes the system engineering approach used to develop distributed multi-purpose simulations. The multi-purpose simulation architecture focuses on user needs, operations, flexibility, cost and maintenance. This approach was used to develop an International Space Station (ISS) simulator, which is called the International Space Station Integrated Simulation (ISIS)1. The ISIS runs unmodified ISS flight software, system models, and the astronaut command and control interface in an open system design that allows for rapid integration of multiple ISS models. The initial intent of ISIS was to provide a distributed system that allows access to ISS flight software and models for the creation, test, and validation of crew and ground controller procedures. This capability reduces the cost and scheduling issues associated with utilizing standalone simulators in fixed locations, and facilitates discovering unknowns and errors earlier in the development lifecycle. Since its inception, the flexible architecture of the ISIS has allowed its purpose to evolve to include ground operator system and display training, flight software modification testing, and as a realistic test bed for Exploration automation technology research and development.

An Architecture for Health Information Exchange in Pervasive Healthcare Environment

NARCIS (Netherlands)

Cardoso de Moraes, J.L.; Lopes de Souza, Wanderley; Ferreira Pires, Luis; Francisco do Prado, Antonio; Hammoudi, S.; Cordeiro, J.; Maciaszek, L.A.; Filipe, J.

2014-01-01

This paper presents an architecture for health information exchange in pervasive healthcare environments meant to be generally applicable to different applications in the healthcare domain. Our architecture has been designed for message exchange by integrating ubiquitous computing technologies,

Deep learning architectures for multi-label classification of intelligent health risk prediction.

Science.gov (United States)

Maxwell, Andrew; Li, Runzhi; Yang, Bei; Weng, Heng; Ou, Aihua; Hong, Huixiao; Zhou, Zhaoxian; Gong, Ping; Zhang, Chaoyang

2017-12-28

Multi-label classification of data remains to be a challenging problem. Because of the complexity of the data, it is sometimes difficult to infer information about classes that are not mutually exclusive. For medical data, patients could have symptoms of multiple different diseases at the same time and it is important to develop tools that help to identify problems early. Intelligent health risk prediction models built with deep learning architectures offer a powerful tool for physicians to identify patterns in patient data that indicate risks associated with certain types of chronic diseases. Physical examination records of 110,300 anonymous patients were used to predict diabetes, hypertension, fatty liver, a combination of these three chronic diseases, and the absence of disease (8 classes in total). The dataset was split into training (90%) and testing (10%) sub-datasets. Ten-fold cross validation was used to evaluate prediction accuracy with metrics such as precision, recall, and F-score. Deep Learning (DL) architectures were compared with standard and state-of-the-art multi-label classification methods. Preliminary results suggest that Deep Neural Networks (DNN), a DL architecture, when applied to multi-label classification of chronic diseases, produced accuracy that was comparable to that of common methods such as Support Vector Machines. We have implemented DNNs to handle both problem transformation and algorithm adaption type multi-label methods and compare both to see which is preferable. Deep Learning architectures have the potential of inferring more information about the patterns of physical examination data than common classification methods. The advanced techniques of Deep Learning can be used to identify the significance of different features from physical examination data as well as to learn the contributions of each feature that impact a patient's risk for chronic diseases. However, accurate prediction of chronic disease risks remains a challenging

The problems of peculiarity regeneration of architectural-spatial environment of demolished cities

Directory of Open Access Journals (Sweden)

Babakhanyans Dalar

2017-01-01

Full Text Available Boundaries of national and international, typical and peculiar, individual and mass are ignored in the present conditions of battles (globalization, leakage of information, loss of technology, fast programs and the observation and regeneration of architectural-spatial environments has become very important. The article observes the revelation of this problem with regeneration of architectural-spatial environment of Gyumri city. The goal is to determine modern approaches of observance of the peculiarity of cities. The problem is to study development demands of architectural-spatial environment in modern and historical cities, to study its perception mechanisms , the main factors and patterns.

Lidar Architecture for Harsh Environment Applications

Directory of Open Access Journals (Sweden)

Church Philip

2016-01-01

Full Text Available An overview is provided of the obscurantpenetrating OPAL lidar sensor developed for harsh environments, including poor visibility conditions. The underlying technology, hardware and software architecture of the sensor are presented along with some examples of its software modules’ applications. The paper also discusses the performance of the OPAL in the presence of various types of obscurants.

ELISA, a demonstrator environment for information systems architecture design

Science.gov (United States)

Panem, Chantal

1994-01-01

This paper describes an approach of reusability of software engineering technology in the area of ground space system design. System engineers have lots of needs similar to software developers: sharing of a common data base, capitalization of knowledge, definition of a common design process, communication between different technical domains. Moreover system designers need to simulate dynamically their system as early as possible. Software development environments, methods and tools now become operational and widely used. Their architecture is based on a unique object base, a set of common management services and they host a family of tools for each life cycle activity. In late '92, CNES decided to develop a demonstrative software environment supporting some system activities. The design of ground space data processing systems was chosen as the application domain. ELISA (Integrated Software Environment for Architectures Specification) was specified as a 'demonstrator', i.e. a sufficient basis for demonstrations, evaluation and future operational enhancements. A process with three phases was implemented: system requirements definition, design of system architectures models, and selection of physical architectures. Each phase is composed of several activities that can be performed in parallel, with the provision of Commercial Off the Shelves Tools. ELISA has been delivered to CNES in January 94, currently used for demonstrations and evaluations on real projects (e.g. SPOT4 Satellite Control Center). It is on the way of new evolutions.

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography

Science.gov (United States)

Reddy, Alavalapati Goutham; Das, Ashok Kumar; Odelu, Vanga; Yoo, Kee-Young

2016-01-01

Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.’s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN) logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.’s protocol and existing similar protocols. PMID:27163786

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography.

Directory of Open Access Journals (Sweden)

Alavalapati Goutham Reddy

Full Text Available Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.'s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

MF-CRA: Multi-Function Cognitive Radio Architecture for Space Communications, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — EpiSys Science, Inc. and University of Arizona propose to develop, implement, and demonstrate Multi-Function Cognitive Radio Architecture (MF-CRA) for Space...

An Efficient VLSI Architecture for Multi-Channel Spike Sorting Using a Generalized Hebbian Algorithm

Directory of Open Access Journals (Sweden)

Ying-Lun Chen

2015-08-01

Full Text Available A novel VLSI architecture for multi-channel online spike sorting is presented in this paper. In the architecture, the spike detection is based on nonlinear energy operator (NEO, and the feature extraction is carried out by the generalized Hebbian algorithm (GHA. To lower the power consumption and area costs of the circuits, all of the channels share the same core for spike detection and feature extraction operations. Each channel has dedicated buffers for storing the detected spikes and the principal components of that channel. The proposed circuit also contains a clock gating system supplying the clock to only the buffers of channels currently using the computation core to further reduce the power consumption. The architecture has been implemented by an application-specific integrated circuit (ASIC with 90-nm technology. Comparisons to the existing works show that the proposed architecture has lower power consumption and hardware area costs for real-time multi-channel spike detection and feature extraction.

An Efficient VLSI Architecture for Multi-Channel Spike Sorting Using a Generalized Hebbian Algorithm.

Science.gov (United States)

Chen, Ying-Lun; Hwang, Wen-Jyi; Ke, Chi-En

2015-08-13

A novel VLSI architecture for multi-channel online spike sorting is presented in this paper. In the architecture, the spike detection is based on nonlinear energy operator (NEO), and the feature extraction is carried out by the generalized Hebbian algorithm (GHA). To lower the power consumption and area costs of the circuits, all of the channels share the same core for spike detection and feature extraction operations. Each channel has dedicated buffers for storing the detected spikes and the principal components of that channel. The proposed circuit also contains a clock gating system supplying the clock to only the buffers of channels currently using the computation core to further reduce the power consumption. The architecture has been implemented by an application-specific integrated circuit (ASIC) with 90-nm technology. Comparisons to the existing works show that the proposed architecture has lower power consumption and hardware area costs for real-time multi-channel spike detection and feature extraction.

An Efficient VLSI Architecture for Multi-Channel Spike Sorting Using a Generalized Hebbian Algorithm

Science.gov (United States)

Chen, Ying-Lun; Hwang, Wen-Jyi; Ke, Chi-En

2015-01-01

A novel VLSI architecture for multi-channel online spike sorting is presented in this paper. In the architecture, the spike detection is based on nonlinear energy operator (NEO), and the feature extraction is carried out by the generalized Hebbian algorithm (GHA). To lower the power consumption and area costs of the circuits, all of the channels share the same core for spike detection and feature extraction operations. Each channel has dedicated buffers for storing the detected spikes and the principal components of that channel. The proposed circuit also contains a clock gating system supplying the clock to only the buffers of channels currently using the computation core to further reduce the power consumption. The architecture has been implemented by an application-specific integrated circuit (ASIC) with 90-nm technology. Comparisons to the existing works show that the proposed architecture has lower power consumption and hardware area costs for real-time multi-channel spike detection and feature extraction. PMID:26287193

Multi-link laser interferometry architecture for interspacecraft displacement metrology

Science.gov (United States)

Francis, Samuel P.; Lam, Timothy T.-Y.; McClelland, David E.; Shaddock, Daniel A.

2018-03-01

Targeting a future Gravity Recovery and Climate Experiment (GRACE) mission, we present a new laser interferometry architecture that can be used to recover the displacement between two spacecraft from multiple interspacecraft measurements. We show it is possible to recover the displacement between the spacecraft centers of mass in post-processing by forming linear combinations of multiple, spatially offset, interspacecraft measurements. By canceling measurement error due to angular misalignment of the spacecraft, we remove the need for precise placement or alignment of the interferometer, potentially simplifying spacecraft integration. To realize this multi-link architecture, we propose an all-fiber interferometer, removing the need for any ultrastable optical components such as the GRACE Follow-On mission's triple mirror assembly. Using digitally enhanced heterodyne interferometry, the number of links is readily scalable, adding redundancy to our measurement. We present the concept, an example multi-link implementation and the signal processing required to recover the center of mass displacement from multiple link measurements. Finally, in a simulation, we analyze the limiting noise sources in a 9 link interferometer and ultimately show we can recover the 80 {nm}/√{ {Hz}} displacement sensitivity required by the GRACE Follow-On laser ranging interferometer.

Multi-VO support in IHEP's distributed computing environment

International Nuclear Information System (INIS)

Yan, T; Suo, B; Zhao, X H; Zhang, X M; Ma, Z T; Yan, X F; Lin, T; Deng, Z Y; Li, W D; Belov, S; Pelevanyuk, I; Zhemchugov, A; Cai, H

2015-01-01

Inspired by the success of BESDIRAC, the distributed computing environment based on DIRAC for BESIII experiment, several other experiments operated by Institute of High Energy Physics (IHEP), such as Circular Electron Positron Collider (CEPC), Jiangmen Underground Neutrino Observatory (JUNO), Large High Altitude Air Shower Observatory (LHAASO) and Hard X-ray Modulation Telescope (HXMT) etc, are willing to use DIRAC to integrate the geographically distributed computing resources available by their collaborations. In order to minimize manpower and hardware cost, we extended the BESDIRAC platform to support multi-VO scenario, instead of setting up a self-contained distributed computing environment for each VO. This makes DIRAC as a service for the community of those experiments. To support multi-VO, the system architecture of BESDIRAC is adjusted for scalability. The VOMS and DIRAC servers are reconfigured to manage users and groups belong to several VOs. A lightweight storage resource manager StoRM is employed as the central SE to integrate local and grid data. A frontend system is designed for user's massive job splitting, submission and management, with plugins to support new VOs. A monitoring and accounting system is also considered to easy the system administration and VO related resources usage accounting. (paper)

An Agent Architecture for Multi-Attribute Negotiation Using Incomplete Preference Information

NARCIS (Netherlands)

Jonker, C.M.; Robu, V.; Treur, J.

2007-01-01

A component-based generic agent architecture for multi-attribute (integrative) negotiation is introduced and its application is described in a prototype system for negotiation about cars, developed in cooperation with, among others, Dutch Telecom KPN. The approach can be characterized as cooperative

A Multi-homed VPN Architecture Based on Extended SOCKS+TLS Protocols

Institute of Scientific and Technical Information of China (English)

无

2005-01-01

A multi-homed VPN architecture based on extended SOCKSv5 and TLS was proposed. The architecture employs a dynamic connection mechanism for multiple proxies in the end system,in which the security-demanded transmission connections can switch smoothly among the multiple proxies by maintaining a coherent connection context. The mechanism is transparent to application programs and can support the building of VPN. With the cooperation of some other security components,the mechanism guarantees the resource availability and reliability of the end system against some attacks to the specific ports or hosts.

Evaluating the Physical Environment of Design Studios: A Case study in Malaysian Private Architecture Schools

Directory of Open Access Journals (Sweden)

Shanthi Muniandy

2015-09-01

Full Text Available Understanding the notion of learner’s experiences in the design of physical environment of an architecture design studio is a necessity as it contains certain values of influence. It is due to the unique learning experiences which are accrued particularly in design studio that is continued during professional practice as well. Most architectural campuses in Malaysian Private Higher Education Institutions (MPHEI are devoid of certain important elements and this issue needs to be looked into seriously. Apparently, most architectural design studios today have different physical settings, and have developed their own learning culture based on the typical space that they have. Reviewing the physical environment and how it contributes to the social environ-ment in MPHEI’s architectural context requires certain understanding on the learner’s psycho-logical needs, expectations and in the same time to meet the educational objective which is never an easy task. Hence, this paper reviewed the studies of the possible physical environment approaches in connecting the learner’s connections in architecture studio learning environ-ment. A questionnaire survey with Likert-scale components, and semi-structured interview on learners of five distinguished Private Architectural schools in Malaysia unveiled several signifi-cant findings that can lead entrepreneurs to upgrade the physical environment of these MPHEIs in order to cope with the demands of the stakeholders.

A multi-agent system architecture for sensor networks.

Science.gov (United States)

Fuentes-Fernández, Rubén; Guijarro, María; Pajares, Gonzalo

2009-01-01

The design of the control systems for sensor networks presents important challenges. Besides the traditional problems about how to process the sensor data to obtain the target information, engineers need to consider additional aspects such as the heterogeneity and high number of sensors, and the flexibility of these networks regarding topologies and the sensors in them. Although there are partial approaches for resolving these issues, their integration relies on ad hoc solutions requiring important development efforts. In order to provide an effective approach for this integration, this paper proposes an architecture based on the multi-agent system paradigm with a clear separation of concerns. The architecture considers sensors as devices used by an upper layer of manager agents. These agents are able to communicate and negotiate services to achieve the required functionality. Activities are organized according to roles related with the different aspects to integrate, mainly sensor management, data processing, communication and adaptation to changes in the available devices and their capabilities. This organization largely isolates and decouples the data management from the changing network, while encouraging reuse of solutions. The use of the architecture is facilitated by a specific modelling language developed through metamodelling. A case study concerning a generic distributed system for fire fighting illustrates the approach and the comparison with related work.

NECTAR: Simulation and Visualization in a 3D Collaborative Environment

NARCIS (Netherlands)

Law, Y.W.; Chan, K.Y.

For simulation and visualization in a 3D collaborative environment, an architecture called the Nanyang Experimental CollaboraTive ARchitecture (NECTAR) has been developed. The objective is to support multi-user collaboration in a virtual environment with an emphasis on cost-effectiveness and

Fuzzy logic based power-efficient real-time multi-core system

CERN Document Server

Ahmed, Jameel; Najam, Shaheryar; Najam, Zohaib

2017-01-01

This book focuses on identifying the performance challenges involved in computer architectures, optimal configuration settings and analysing their impact on the performance of multi-core architectures. Proposing a power and throughput-aware fuzzy-logic-based reconfiguration for Multi-Processor Systems on Chip (MPSoCs) in both simulation and real-time environments, it is divided into two major parts. The first part deals with the simulation-based power and throughput-aware fuzzy logic reconfiguration for multi-core architectures, presenting the results of a detailed analysis on the factors impacting the power consumption and performance of MPSoCs. In turn, the second part highlights the real-time implementation of fuzzy-logic-based power-efficient reconfigurable multi-core architectures for Intel and Leone3 processors. .

Behavioral Simulation and Performance Evaluation of Multi-Processor Architectures

Directory of Open Access Journals (Sweden)

Ausif Mahmood

1996-01-01

Full Text Available The development of multi-processor architectures requires extensive behavioral simulations to verify the correctness of design and to evaluate its performance. A high level language can provide maximum flexibility in this respect if the constructs for handling concurrent processes and a time mapping mechanism are added. This paper describes a novel technique for emulating hardware processes involved in a parallel architecture such that an object-oriented description of the design is maintained. The communication and synchronization between hardware processes is handled by splitting the processes into their equivalent subprograms at the entry points. The proper scheduling of these subprograms is coordinated by a timing wheel which provides a time mapping mechanism. Finally, a high level language pre-processor is proposed so that the timing wheel and the process emulation details can be made transparent to the user.

Acoustic simulation in architecture with parallel algorithm

Science.gov (United States)

Li, Xiaohong; Zhang, Xinrong; Li, Dan

2004-03-01

In allusion to complexity of architecture environment and Real-time simulation of architecture acoustics, a parallel radiosity algorithm was developed. The distribution of sound energy in scene is solved with this method. And then the impulse response between sources and receivers at frequency segment, which are calculated with multi-process, are combined into whole frequency response. The numerical experiment shows that parallel arithmetic can improve the acoustic simulating efficiency of complex scene.

Cognitive architectures: choreographing the dance of mental operations with the task environment.

Science.gov (United States)

Gray, Wayne D

2008-06-01

In this article, I present the ideas and trends that have given rise to the use of cognitive architectures in human factors and provide a cognitive engineering-oriented taxonomy of these architectures and a snapshot of their use for cognitive engineering. Architectures of cognition have had a long history in human factors but a brief past. The long history entails a 50-year preamble, whereas the explosion of work in the current decade reflects the brief past. Understanding this history is key to understanding the current and future prospects for applying cognitive science theory to human factors practice. The review defines three formative eras in cognitive engineering research: the 1950s, 1980s, and now. In the first era, the fledging fields of cognitive science and human factors emphasized characteristics of the dancer the limited capacity or bounded rationality view of the mind, and the ballroom, the task environment. The second era emphasized the dance (i.e., the dynamic interaction between mental operations and task environment). The third era has seen the rise of cognitive architectures as tools for choreographing the dance of mental operations within the complex environments posed by human factors practice. Hybrid architectures present the best vector for introducing cognitive science theories into a renewed engineering-based human factors. The taxonomy provided in this article may provide guidance on when and whether to apply a cognitive science or a hybrid architecture to a human factors issue.

Using EDUCache Simulator for the Computer Architecture and Organization Course

Directory of Open Access Journals (Sweden)

Sasko Ristov

2013-07-01

Full Text Available The computer architecture and organization course is essential in all computer science and engineering programs, and the most selected and liked elective course for related engineering disciplines. However, the attractiveness brings a new challenge, it requires a lot of effort by the instructor, to explain rather complicated concepts to beginners or to those who study related disciplines. The usage of visual simulators can improve both the teaching and learning processes. The overall goal is twofold: 1~to enable a visual environment to explain the basic concepts and 2~to increase the student's willingness and ability to learn the material.A lot of visual simulators have been used for the computer architecture and organization course. However, due to the lack of visual simulators for simulation of the cache memory concepts, we have developed a new visual simulator EDUCache simulator. In this paper we present that it can be effectively and efficiently used as a supporting tool in the learning process of modern multi-layer, multi-cache and multi-core multi-processors.EDUCache's features enable an environment for performance evaluation and engineering of software systems, i.e. the students will also understand the importance of computer architecture building parts and hopefully, will increase their curiosity for hardware courses in general.

Architecture Capabilities to Improve Healthcare Environments

Science.gov (United States)

Ebrahimi, Ali; Mardomi, Karim; Hassanpour Rahimabad, Kasra

2013-01-01

Background The physical environment of healthcare buildings has great importance in issues such as patient safety, functional efficiency, user satisfaction, healthcare outcomes, and energy and resources consumption. Objectives The present study assesses physical environments of Iranian healthcare buildings. Materials and Methods This study was performed using a descriptive-analytical method. Data collection was carried out via a written questionnaire. Results Based on the findings of this study, "functional efficiency", "user satisfaction", "environmental issues", "patient safety”, “accountability in incidents and disasters", and "flexibility" are regarded as the most issues in the country's hospitals. Also, none of the parameters is "without any problem" and has a "desirable status". Conclusions According to the responses, all of the healthcare buildings in this research had flaws in their physical environment, which require attention. Thus, it is necessary to review and pay more attention to the architecture of the country's healthcare buildings. PMID:24350145

Earth Science Computational Architecture for Multi-disciplinary Investigations

Science.gov (United States)

Parker, J. W.; Blom, R.; Gurrola, E.; Katz, D.; Lyzenga, G.; Norton, C.

2005-12-01

Understanding the processes underlying Earth's deformation and mass transport requires a non-traditional, integrated, interdisciplinary, approach dependent on multiple space and ground based data sets, modeling, and computational tools. Currently, details of geophysical data acquisition, analysis, and modeling largely limit research to discipline domain experts. Interdisciplinary research requires a new computational architecture that is optimized to perform complex data processing of multiple solid Earth science data types in a user-friendly environment. A web-based computational framework is being developed and integrated with applications for automatic interferometric radar processing, and models for high-resolution deformation & gravity, forward models of viscoelastic mass loading over short wavelengths & complex time histories, forward-inverse codes for characterizing surface loading-response over time scales of days to tens of thousands of years, and inversion of combined space magnetic & gravity fields to constrain deep crustal and mantle properties. This framework combines an adaptation of the QuakeSim distributed services methodology with the Pyre framework for multiphysics development. The system uses a three-tier architecture, with a middle tier server that manages user projects, available resources, and security. This ensures scalability to very large networks of collaborators. Users log into a web page and have a personal project area, persistently maintained between connections, for each application. Upon selection of an application and host from a list of available entities, inputs may be uploaded or constructed from web forms and available data archives, including gravity, GPS and imaging radar data. The user is notified of job completion and directed to results posted via URLs. Interdisciplinary work is supported through easy availability of all applications via common browsers, application tutorials and reference guides, and worked examples with

FY1995 study of design methodology and environment of high-performance processor architectures; 1995 nendo koseino processor architecture sekkeiho to sekkei kankyo no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The aim of our project is to develop high-performance processor architectures for both general purpose and application-specific purpose. We also plan to develop basic softwares, such as compliers, and various design aid tools for those architectures. We are particularly interested in performance evaluation at architecture design phase, design optimization, automatic generation of compliers from processor designs, and architecture design methodologies combined with circuit layout. We have investigated both microprocessor architectures and design methodologies / environments for the processors. Our goal is to establish design technologies for high-performance, low-power, low-cost and highly-reliable systems in system-on-silicon era. We have proposed PPRAM architecture for high-performance system using DRAM and logic mixture technology, Softcore processor architecture for special purpose processors in embedded systems, and Power-Pro architecture for low power systems. We also developed design methodologies and design environments for the above architectures as well as a new method for design verification of microprocessors. (NEDO)

A Multi-Agent System Architecture for Sensor Networks

Directory of Open Access Journals (Sweden)

María Guijarro

2009-12-01

Full Text Available The design of the control systems for sensor networks presents important challenges. Besides the traditional problems about how to process the sensor data to obtain the target information, engineers need to consider additional aspects such as the heterogeneity and high number of sensors, and the flexibility of these networks regarding topologies and the sensors in them. Although there are partial approaches for resolving these issues, their integration relies on ad hoc solutions requiring important development efforts. In order to provide an effective approach for this integration, this paper proposes an architecture based on the multi-agent system paradigm with a clear separation of concerns. The architecture considers sensors as devices used by an upper layer of manager agents. These agents are able to communicate and negotiate services to achieve the required functionality. Activities are organized according to roles related with the different aspects to integrate, mainly sensor management, data processing, communication and adaptation to changes in the available devices and their capabilities. This organization largely isolates and decouples the data management from the changing network, while encouraging reuse of solutions. The use of the architecture is facilitated by a specific modelling language developed through metamodelling. A case study concerning a generic distributed system for fire fighting illustrates the approach and the comparison with related work.

Architecture Students' Perceptions of Their Learning Environment and Their Academic Performance

Science.gov (United States)

Oluwatayo, Adedapo Adewunmi; Aderonmu, Peter A.; Aduwo, Egidario B.

2015-01-01

Scholars have agreed that the way in which students perceive their learning environments influences their academic performance. Empirical studies that focus on architecture students, however, have been very scarce. This is the gap that an attempt is filled in this study. A questionnaire survey of 273 students in a school of architecture in Nigeria…

Fork-join and data-driven execution models on multi-core architectures: Case study of the FMM

KAUST Repository

Amer, Abdelhalim

2013-01-01

Extracting maximum performance of multi-core architectures is a difficult task primarily due to bandwidth limitations of the memory subsystem and its complex hierarchy. In this work, we study the implications of fork-join and data-driven execution models on this type of architecture at the level of task parallelism. For this purpose, we use a highly optimized fork-join based implementation of the FMM and extend it to a data-driven implementation using a distributed task scheduling approach. This study exposes some limitations of the conventional fork-join implementation in terms of synchronization overheads. We find that these are not negligible and their elimination by the data-driven method, with a careful data locality strategy, was beneficial. Experimental evaluation of both methods on state-of-the-art multi-socket multi-core architectures showed up to 22% speed-ups of the data-driven approach compared to the original method. We demonstrate that a data-driven execution of FMM not only improves performance by avoiding global synchronization overheads but also reduces the memory-bandwidth pressure caused by memory-intensive computations. © 2013 Springer-Verlag.

A Heterogeneous Multi-core Architecture with a Hardware Kernel for Control Systems

DEFF Research Database (Denmark)

Li, Gang; Guan, Wei; Sierszecki, Krzysztof

2012-01-01

Rapid industrialisation has resulted in a demand for improved embedded control systems with features such as predictability, high processing performance and low power consumption. Software kernel implementation on a single processor is becoming more difficult to satisfy those constraints. This pa......Rapid industrialisation has resulted in a demand for improved embedded control systems with features such as predictability, high processing performance and low power consumption. Software kernel implementation on a single processor is becoming more difficult to satisfy those constraints......). Second, a heterogeneous multi-core architecture is investigated, focusing on its performance in relation to hard real-time constraints and predictable behavior. Third, the hardware implementation of HARTEX is designated to support the heterogeneous multi-core architecture. This hardware kernel has...... several advantages over a similar kernel implemented in software: higher-speed processing capability, parallel computation, and separation between the kernel itself and the applications being run. A microbenchmark has been used to compare the hardware kernel with the software kernel, and compare...

Innovative architectures in ferroelectric multi-materials: Chemistry, interfaces and strain

Directory of Open Access Journals (Sweden)

C. Elissalde

2015-06-01

Full Text Available Breakthroughs can be expected in multi-component ceramics by adjusting the phase assembly and the micro–nanostructure. Controlling the architecture of multi-materials at different scales is still challenging and provides a great opportunity to broaden the range of functionalities in the field of ferroelectric-based ceramics. We used the potentialities of Spark Plasma Sintering (SPS to control a number of key parameters regarding the properties: anisotropy, interfaces, grain size and strain effects. The flexibility of the wet and supercritical chemistry routes associated with the versatility of SPS allowed designing new ferroelectric composite ceramics at different scales. These approaches are illustrated through various examples based on our work on ferroelectric/dielectric composites.

A scalable single-chip multi-processor architecture with on-chip RTOS kernel

NARCIS (Netherlands)

Theelen, B.D.; Verschueren, A.C.; Reyes Suarez, V.V.; Stevens, M.P.J.; Nunez, A.

2003-01-01

Now that system-on-chip technology is emerging, single-chip multi-processors are becoming feasible. A key problem of designing such systems is the complexity of their on-chip interconnects and memory architecture. It is furthermore unclear at what level software should be integrated. An example of a

ARTiS, an Asymmetric Real-Time Scheduler for Linux on Multi-Processor Architectures

OpenAIRE

Piel , Éric; Marquet , Philippe; Soula , Julien; Osuna , Christophe; Dekeyser , Jean-Luc

2005-01-01

The ARTiS system is a real-time extension of the GNU/Linux scheduler dedicated to SMP (Symmetric Multi-Processors) systems. It allows to mix High Performance Computing and real-time. ARTiS exploits the SMP architecture to guarantee the preemption of a processor when the system has to schedule a real-time task. The implementation is available as a modification of the Linux kernel, especially focusing (but not restricted to) IA-64 architecture. The basic idea of ARTiS is to assign a selected se...

Sedimentary architecture and depositional environment of Kudat Formation, Sabah, Malaysia

Science.gov (United States)

Ghaheri, Samira; Suhaili, Mohd; Sapari, Nasiman; Momeni, Mohammadsadegh

2017-12-01

Kudat Formation originated from deep marine environment. Three lithofacies association of deep marine turbidity channel was discovered in three Members of the Kudat Formation in Kudat Peninsula, Sabah, Malaysia. Turbidite and deep marine architecture elements was described based on detailed sedimentological studies. Four architecture elements were identified based on each facies association and their lithology properties and character: inner external levee that was formed by turbidity flows spill out from their confinement of channel belt; Lobes sheet that was formed during downslope debris flows associated with levee; Channel fill which sediments deposited from high to low density currents with different value of sediment concentration; and overbank terrace which was formed by rapid suspension sedimentation. The depositional environment of Kudat Formation is shelf to deep marine fan.

A Software Architecture for Intelligent Synthesis Environments

Science.gov (United States)

Filman, Robert E.; Norvig, Peter (Technical Monitor)

2001-01-01

The NASA's Intelligent Synthesis Environment (ISE) program is a grand attempt to develop a system to transform the way complex artifacts are engineered. This paper discusses a "middleware" architecture for enabling the development of ISE. Desirable elements of such an Intelligent Synthesis Architecture (ISA) include remote invocation; plug-and-play applications; scripting of applications; management of design artifacts, tools, and artifact and tool attributes; common system services; system management; and systematic enforcement of policies. This paper argues that the ISA extend conventional distributed object technology (DOT) such as CORBA and Product Data Managers with flexible repositories of product and tool annotations and "plug-and-play" mechanisms for inserting "ility" or orthogonal concerns into the system. I describe the Object Infrastructure Framework, an Aspect Oriented Programming (AOP) environment for developing distributed systems that provides utility insertion and enables consistent annotation maintenance. This technology can be used to enforce policies such as maintaining the annotations of artifacts, particularly the provenance and access control rules of artifacts-, performing automatic datatype transformations between representations; supplying alternative servers of the same service; reporting on the status of jobs and the system; conveying privileges throughout an application; supporting long-lived transactions; maintaining version consistency; and providing software redundancy and mobility.

A multi-tiered architecture for content retrieval in mobile peer-to-peer networks.

Science.gov (United States)

2012-01-01

In this paper, we address content retrieval in Mobile Peer-to-Peer (P2P) Networks. We design a multi-tiered architecture for content : retrieval, where at Tier 1, we design a protocol for content similarity governed by a parameter that trades accu...

Interaction Control Protocols for Distributed Multi-user Multi-camera Environments

Directory of Open Access Journals (Sweden)

Gareth W Daniel

2003-10-01

Full Text Available Video-centred communication (e.g., video conferencing, multimedia online learning, traffic monitoring, and surveillance is becoming a customary activity in our lives. The management of interactions in such an environment is a complicated HCI issue. In this paper, we present our study on a collection of interaction control protocols for distributed multiuser multi-camera environments. These protocols facilitate different approaches to managing a user's entitlement for controlling a particular camera. We describe a web-based system that allows multiple users to manipulate multiple cameras in varying remote locations. The system was developed using the Java framework, and all protocols discussed have been incorporated into the system. Experiments were designed and conducted to evaluate the effectiveness of these protocols, and to enable the identification of various human factors in a distributed multi-user and multi-camera environment. This work provides an insight into the complexity associated with the interaction management in video-centred communication. It can also serve as a conceptual and experimental framework for further research in this area.

ALLIANCE: An architecture for fault tolerant multi-robot cooperation

Energy Technology Data Exchange (ETDEWEB)

Parker, L.E.

1995-02-01

ALLIANCE is a software architecture that facilitates the fault tolerant cooperative control of teams of heterogeneous mobile robots performing missions composed of loosely coupled, largely independent subtasks. ALLIANCE allows teams of robots, each of which possesses a variety of high-level functions that it can perform during a mission, to individually select appropriate actions throughout the mission based on the requirements of the mission, the activities of other robots, the current environmental conditions, and the robot`s own internal states. ALLIANCE is a fully distributed, behavior-based architecture that incorporates the use of mathematically modeled motivations (such as impatience and acquiescence) within each robot to achieve adaptive action selection. Since cooperative robotic teams usually work in dynamic and unpredictable environments, this software architecture allows the robot team members to respond robustly, reliably, flexibly, and coherently to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. The feasibility of this architecture is demonstrated in an implementation on a team of mobile robots performing a laboratory version of hazardous waste cleanup.

ALLIANCE: An architecture for fault tolerant multi-robot cooperation

International Nuclear Information System (INIS)

Parker, L.E.

1995-02-01

ALLIANCE is a software architecture that facilitates the fault tolerant cooperative control of teams of heterogeneous mobile robots performing missions composed of loosely coupled, largely independent subtasks. ALLIANCE allows teams of robots, each of which possesses a variety of high-level functions that it can perform during a mission, to individually select appropriate actions throughout the mission based on the requirements of the mission, the activities of other robots, the current environmental conditions, and the robot's own internal states. ALLIANCE is a fully distributed, behavior-based architecture that incorporates the use of mathematically modeled motivations (such as impatience and acquiescence) within each robot to achieve adaptive action selection. Since cooperative robotic teams usually work in dynamic and unpredictable environments, this software architecture allows the robot team members to respond robustly, reliably, flexibly, and coherently to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. The feasibility of this architecture is demonstrated in an implementation on a team of mobile robots performing a laboratory version of hazardous waste cleanup

Cloud-based multi-agent architecture for effective planning and scheduling of distributed manufacturing

DEFF Research Database (Denmark)

Mishra, Nishikant; Singh, Akshit; Kumari, Sushma

2016-01-01

at distinct locations are being assembled in a plant to develop the final product. In this complex scenario, manufacturing firms have to be responsive enough to cope with the fluctuating demand of customers. To accomplish it, there is a need to develop an integrated, dynamic and autonomous system....... In this article, a self-reactive cloud-based multi-agent architecture for distributed manufacturing system is developed. The proposed architecture will assist manufacturing industry to establish real-time information exchange between the autonomous agents, clients, suppliers and manufacturing unit. The mechanism...

HoMuCS - A methodology and architecture for Holonic Multi-cell Control Systems

DEFF Research Database (Denmark)

Langer, Gilad

it in practice. An iterative developmentprocess was used to obtain the empiricalbasis for the research work. This involved development of prototypes aimed at testing the feasibility of the theory and investigating its applicability. The main issue that the prototypes were tested for was their agile performance...... as the hypothesis of the research. Firstly that it is possible to realise holonic systems based on the HMS theory, specifically its reference architecture, and secondly that they are in fact agile. Itpresents the concept of a Holonic Multi-cell Control System system-architecture and corresponding methodology, which...... suggests a solution for realising an agile shop floor control system. The current state of the technological development of the HoMuCS architecture and methodology is described....

A Hybrid FPGA/Coarse Parallel Processing Architecture for Multi-modal Visual Feature Descriptors

DEFF Research Database (Denmark)

Jensen, Lars Baunegaard With; Kjær-Nielsen, Anders; Alonso, Javier Díaz

2008-01-01

This paper describes the hybrid architecture developed for speeding up the processing of so-called multi-modal visual primitives which are sparse image descriptors extracted along contours. In the system, the first stages of visual processing are implemented on FPGAs due to their highly parallel...

Software Architecture for a Virtual Environment for Nano Scale Assembly (VENSA).

Science.gov (United States)

Lee, Yong-Gu; Lyons, Kevin W; Feng, Shaw C

2004-01-01

A Virtual Environment (VE) uses multiple computer-generated media to let a user experience situations that are temporally and spatially prohibiting. The information flow between the user and the VE is bidirectional and the user can influence the environment. The software development of a VE requires orchestrating multiple peripherals and computers in a synchronized way in real time. Although a multitude of useful software components for VEs exists, many of these are packaged within a complex framework and can not be used separately. In this paper, an architecture is presented which is designed to let multiple frameworks work together while being shielded from the application program. This architecture, which is called the Virtual Environment for Nano Scale Assembly (VENSA), has been constructed for interfacing with an optical tweezers instrument for nanotechnology development. However, this approach can be generalized for most virtual environments. Through the use of VENSA, the programmer can rely on existing solutions and concentrate more on the application software design.

Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

International Nuclear Information System (INIS)

1994-09-01

This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

Proposed Methodology for Application of Human-like gradual Multi-Agent Q-Learning (HuMAQ) for Multi-robot Exploration

International Nuclear Information System (INIS)

Ray, Dip Narayan; Majumder, Somajyoti

2014-01-01

Several attempts have been made by the researchers around the world to develop a number of autonomous exploration techniques for robots. But it has been always an important issue for developing the algorithm for unstructured and unknown environments. Human-like gradual Multi-agent Q-leaming (HuMAQ) is a technique developed for autonomous robotic exploration in unknown (and even unimaginable) environments. It has been successfully implemented in multi-agent single robotic system. HuMAQ uses the concept of Subsumption architecture, a well-known Behaviour-based architecture for prioritizing the agents of the multi-agent system and executes only the most common action out of all the different actions recommended by different agents. Instead of using new state-action table (Q-table) each time, HuMAQ uses the immediate past table for efficient and faster exploration. The proof of learning has also been established both theoretically and practically. HuMAQ has the potential to be used in different and difficult situations as well as applications. The same architecture has been modified to use for multi-robot exploration in an environment. Apart from all other existing agents used in the single robotic system, agents for inter-robot communication and coordination/ co-operation with the other similar robots have been introduced in the present research. Current work uses a series of indigenously developed identical autonomous robotic systems, communicating with each other through ZigBee protocol

An intelligent service-based layered architecture for e learning and assessment

International Nuclear Information System (INIS)

Javaid, Q.; Arif, F.

2017-01-01

The rapid advancement in ICT (Information and Communication Technology) is causing a paradigm shift in eLearning domain. Traditional eLearning systems suffer from certain shortcomings like tight coupling of system components, lack of personalization, flexibility, and scalability and performance issues. This study aims at addressing these challenges through an MAS (Multi Agent System) based multi-layer architecture supported by web services. The foremost objective of this study is to enhance learning process efficiency by provision of flexibility features for learning and assessment processes. Proposed architecture consists of two sub-system namely eLearning and eAssesssment. This architecture comprises of five distinct layers for each sub-system, with active agents responsible for miscellaneous tasks including content handling, updating, resource optimization, load handling and provision of customized environments for learners and instructors. Our proposed architecture aims at establishment of a facilitation level to learners as well as instructors for convenient acquisition and dissemination of knowledge. Personalization features like customized environments, personalized content retrieval and recommendations, adaptive assessment and reduced response time, are believed to significantly enhance learning and tutoring experience. In essence characteristics like intelligence, personalization, interactivity, usability, laidback accessibility and security, signify aptness of proposed architecture for improving conventional learning and assessment processes. Finally we have evaluated our proposed architecture by means of analytical comparison and survey considering certain quality attributes. (author)

Automation and Control Learning Environment with Mixed Reality Remote Experiments Architecture

Directory of Open Access Journals (Sweden)

Frederico M. Schaf

2007-05-01

Full Text Available This work aims to the use of remotely web-based experiments to improve the learning process of automation and control systems theory courses. An architecture combining virtual learning environments, remote experiments, students guide and experiments analysis is proposed based on a wide state of art study. The validation of the architecture uses state of art technologies and new simple developed programs to implement the case studies presented. All implementations presented use an internet accessible virtual learning environment providing educational resources, guides and learning material to create a distance learning course associated with the remote mixed reality experiment. This work is part of the RExNet consortium, supported by the European Alfa project.

Cryptanalysis and improvement of a biometrics-based authentication and key agreement scheme for multi-server environments.

Science.gov (United States)

Yang, Li; Zheng, Zhiming

2018-01-01

According to advancements in the wireless technologies, study of biometrics-based multi-server authenticated key agreement schemes has acquired a lot of momentum. Recently, Wang et al. presented a three-factor authentication protocol with key agreement and claimed that their scheme was resistant to several prominent attacks. Unfortunately, this paper indicates that their protocol is still vulnerable to the user impersonation attack, privileged insider attack and server spoofing attack. Furthermore, their protocol cannot provide the perfect forward secrecy. As a remedy of these aforementioned problems, we propose a biometrics-based authentication and key agreement scheme for multi-server environments. Compared with various related schemes, our protocol achieves the stronger security and provides more functionality properties. Besides, the proposed protocol shows the satisfactory performances in respect of storage requirement, communication overhead and computational cost. Thus, our protocol is suitable for expert systems and other multi-server architectures. Consequently, the proposed protocol is more appropriate in the distributed networks.

Cryptanalysis and improvement of a biometrics-based authentication and key agreement scheme for multi-server environments

Science.gov (United States)

Zheng, Zhiming

2018-01-01

According to advancements in the wireless technologies, study of biometrics-based multi-server authenticated key agreement schemes has acquired a lot of momentum. Recently, Wang et al. presented a three-factor authentication protocol with key agreement and claimed that their scheme was resistant to several prominent attacks. Unfortunately, this paper indicates that their protocol is still vulnerable to the user impersonation attack, privileged insider attack and server spoofing attack. Furthermore, their protocol cannot provide the perfect forward secrecy. As a remedy of these aforementioned problems, we propose a biometrics-based authentication and key agreement scheme for multi-server environments. Compared with various related schemes, our protocol achieves the stronger security and provides more functionality properties. Besides, the proposed protocol shows the satisfactory performances in respect of storage requirement, communication overhead and computational cost. Thus, our protocol is suitable for expert systems and other multi-server architectures. Consequently, the proposed protocol is more appropriate in the distributed networks. PMID:29534085

Environment and Architecture - a Paradigm Shift

Science.gov (United States)

di Battista, Valerio

The interaction of human cultures and the built environment allows a wide range of interpretations and has been studied inside the domain of many disciplines. This paper discusses three interpretations descending from a systemic approach to the question: - architecture as an "emergence" of the settlement system; - place (and space) as an "accumulator" of time and a "flux" of systems; - landscape as one representation/description of the human settlement. Architecture emerges as a new physical conformation or layout, or as a change in a specific site, arising from actions and representations of political, religious, economical or social powers, being shaped at all times by the material culture belonging to a specific time and place in the course of human evolution. Any inhabited space becomes over time a place as well as a landscape, i.e. a representation of the settlement and a relationship between setting and people. Therefore, any place owns a landscape which, in turn, is a system of physical systems; it could be defined as a system of sites that builds up its own structure stemming from the orographical features and the geometry of land surfaces that set out the basic characters of its space.

A Layered Component-Based Architecture of a Virtual Learning Environment

NARCIS (Netherlands)

Avgeriou, Paris; Retalis, Simos; Skordalakis, Manolis; Psaromiligos, Yiannis

2001-01-01

There exists an urgent demand on defining architectures for Virtual Learning Environments (VLEs), so that high-level frameworks for understanding these systems can be discovered, portability, interoperability and reusability can be achieved and adaptability over time can be accomplished. In this

Weaknesses of a dynamic identity based authentication protocol for multi-server architecture

OpenAIRE

Han, Weiwei

2012-01-01

Recently, Li et al. proposed a dynamic identity based authentication protocol for multi-server architecture. They claimed their protocol is secure and can withstand various attacks. But we found some security loopholes in the protocol. Accordingly, the current paper demonstrates that Li et al.'s protocol is vulnerable to the replay attack, the password guessing attack and the masquerade attack.

An Audio Architecture Integrating Sound and Live Voice for Virtual Environments

National Research Council Canada - National Science Library

Krebs, Eric

2002-01-01

The purpose behind this thesis was to design and implement audio system architecture, both in hardware and in software, for use in virtual environments The hardware and software design requirements...

On Open- source Multi-robot simulators

CSIR Research Space (South Africa)

Namoshe, M

2008-07-01

Full Text Available Open source software simulators play a major role in robotics design and research as platforms for developing, testing and improving architectures, concepts and algorithms for cooperative/multi-robot systems. Simulation environment enables control...

HEP specific benchmarks of virtual machines on multi-core CPU architectures

International Nuclear Information System (INIS)

Alef, M; Gable, I

2010-01-01

Virtualization technologies such as Xen can be used in order to satisfy the disparate and often incompatible system requirements of different user groups in shared-use computing facilities. This capability is particularly important for HEP applications, which often have restrictive requirements. The use of virtualization adds flexibility, however, it is essential that the virtualization technology place little overhead on the HEP application. We present an evaluation of the practicality of running HEP applications in multiple Virtual Machines (VMs) on a single multi-core Linux system. We use the benchmark suite used by the HEPiX CPU Benchmarking Working Group to give a quantitative evaluation relevant to the HEP community. Benchmarks are packaged inside VMs and then the VMs are booted onto a single multi-core system. Benchmarks are then simultaneously executed on each VM to simulate highly loaded VMs running HEP applications. These techniques are applied to a variety of multi-core CPU architectures and VM configurations.

Architectural Decision Management for Digital Transformation of Products and Services

Directory of Open Access Journals (Sweden)

Alfred Zimmermann

2016-04-01

Full Text Available The digitization of our society changes the way we live, work, learn, communicate, and collaborate. The Internet of Things, Enterprise Social Networks, Adaptive Case Management, Mobility systems, Analytics for Big Data, and Cloud services environments are emerging to support smart connected products and services and the digital transformation. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self-optimizing and resilient run-time environments for intelligent business services and service-oriented enterprise architectures. Our aim is to support flexibility and agile transformations for both business domains and related information technology. The present research paper investigates mechanisms for decision analytics in the context of multi-perspective explorations of enterprise services and their digital enterprise architectures by extending original architecture reference models with state of art elements for agile architectural engineering for the digitization and collaborative architectural decision support. The paper’s context focuses on digital transformations of business and IT and integrates fundamental mappings between adaptable digital enterprise architectures and service-oriented information systems. We are putting a spotlight on the example domain – Internet of Things.

Defining a Set of Architectural Requirements for Service-Oriented Mobile Learning Environments

Science.gov (United States)

Filho, Nemésio Freitas Duarte; Barbosa, Ellen Francine

2014-01-01

Even providing several benefits and facilities with regard to teaching and learning, mobile learning environments present problems and challenges that must be investigated, especially with respect to the definition and standardization of architectural aspects. Most of these environments are still built in isolation, with particular structures and…

Review on study of multi-physics in environment engineering

International Nuclear Information System (INIS)

Liu Shanli; Zhao Jian; Sheng Jinchang

2006-01-01

This paper analyzes some problems on multi-field coupling ones between seepage mechanics and other physical and chemical processes (such as temperature field. stress field, solute transport. chemical action and so on) in environment engineering, it explains the research theory of multi-field coupling, it summarizes the abroad and domestic research about the model of multi-field problem and finally it looks into the future of research tendency in environment engineering. (authors)

Virtual Business Operating Environment in the Cloud: Conceptual Architecture and Challenges

Science.gov (United States)

Nezhad, Hamid R. Motahari; Stephenson, Bryan; Singhal, Sharad; Castellanos, Malu

Advances in service oriented architecture (SOA) have brought us close to the once imaginary vision of establishing and running a virtual business, a business in which most or all of its business functions are outsourced to online services. Cloud computing offers a realization of SOA in which IT resources are offered as services that are more affordable, flexible and attractive to businesses. In this paper, we briefly study advances in cloud computing, and discuss the benefits of using cloud services for businesses and trade-offs that they have to consider. We then present 1) a layered architecture for the virtual business, and 2) a conceptual architecture for a virtual business operating environment. We discuss the opportunities and research challenges that are ahead of us in realizing the technical components of this conceptual architecture. We conclude by giving the outlook and impact of cloud services on both large and small businesses.

Image and Morphology in Modern Theory of Architecture

Science.gov (United States)

Yankovskaya, Y. S.; Merenkov, A. V.

2017-11-01

This paper is devoted to some important and fundamental problems of the modern Russian architectural theory. These problems are: methodological and technological retardation; substitution of the modern professional architectural theoretical knowledge by the humanitarian concepts; preference of the traditional historical or historical-theoretical research. One of the most probable ways is the formation of useful modern subject (and multi-subject)-oriented concepts in architecture. To get over the criticism and distrust of the architectural theory is possible through the recognition of an important role of the subject (architect, consumer, contractor, ruler, etc.) and direction of the practical tasks of the forming human environment in the today’s rapidly changing world and post-industrial society. In this article we consider the evolution of two basic concepts for the theory of architecture such as the image and morphology.

Virtualization - A Key Cost Saver in NASA Multi-Mission Ground System Architecture

Science.gov (United States)

Swenson, Paul; Kreisler, Stephen; Sager, Jennifer A.; Smith, Dan

2014-01-01

With science team budgets being slashed, and a lack of adequate facilities for science payload teams to operate their instruments, there is a strong need for innovative new ground systems that are able to provide necessary levels of capability processing power, system availability and redundancy while maintaining a small footprint in terms of physical space, power utilization and cooling.The ground system architecture being presented is based off of heritage from several other projects currently in development or operations at Goddard, but was designed and built specifically to meet the needs of the Science and Planetary Operations Control Center (SPOCC) as a low-cost payload command, control, planning and analysis operations center. However, this SPOCC architecture was designed to be generic enough to be re-used partially or in whole by other labs and missions (since its inception that has already happened in several cases!)The SPOCC architecture leverages a highly available VMware-based virtualization cluster with shared SAS Direct-Attached Storage (DAS) to provide an extremely high-performing, low-power-utilization and small-footprint compute environment that provides Virtual Machine resources shared among the various tenant missions in the SPOCC. The storage is also expandable, allowing future missions to chain up to 7 additional 2U chassis of storage at an extremely competitive cost if they require additional archive or virtual machine storage space.The software architecture provides a fully-redundant GMSEC-based message bus architecture based on the ActiveMQ middleware to track all health and safety status within the SPOCC ground system. All virtual machines utilize the GMSEC system agents to report system host health over the GMSEC bus, and spacecraft payload health is monitored using the Hammers Integrated Test and Operations System (ITOS) Galaxy Telemetry and Command (TC) system, which performs near-real-time limit checking and data processing on the

TexMo: A Multi-language Development Environment

DEFF Research Database (Denmark)

Pfeiffer, Rolf-Helge; Wasowski, Andrzej

2012-01-01

Contemporary software systems contain a large number of artifacts expressed in multiple languages, ranging from domain-specific languages to general purpose languages. These artifacts are interrelated to form software systems. Existing development environments insufficiently support handling...... relations between artifacts in multiple languages. This paper presents a taxonomy for multi-language development environments, organized according to language representation, representation of relations between languages, and types of these relations. Additionally, we present TexMo, a prototype of a multi-language...... development environment, which uses an explicit relation model and implements visualization, static checking, navigation, and refactoring of cross-language relations. We evaluate TexMo by applying it to development of a web-application, JTrac, and provide preliminary evidence of its feasibility by running...

Architecture independent environment for developing engineering software on MIMD computers

Science.gov (United States)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

A Versatile Simulation Environment of FTC Architectures for Large Transport Aircraft

OpenAIRE

Ossmann, Daniel; Varga, Andreas; Simon, Hecker

2010-01-01

We present a simulation environment with 3-D stereo visualization facilities destined for an easy setup and versatile assessment of fault detection and diagnosis based fault tolerant control systems. This environment has been primarily developed as a technology demonstrator of advanced reconfigurable flight control systems and is based on a realistic six degree of freedom flexible aircraft model. The aircraft control system architecture includes a flexible fault detection and diagnosis syste...

Interactive natural language acquisition in a multi-modal recurrent neural architecture

Science.gov (United States)

Heinrich, Stefan; Wermter, Stefan

2018-01-01

For the complex human brain that enables us to communicate in natural language, we gathered good understandings of principles underlying language acquisition and processing, knowledge about sociocultural conditions, and insights into activity patterns in the brain. However, we were not yet able to understand the behavioural and mechanistic characteristics for natural language and how mechanisms in the brain allow to acquire and process language. In bridging the insights from behavioural psychology and neuroscience, the goal of this paper is to contribute a computational understanding of appropriate characteristics that favour language acquisition. Accordingly, we provide concepts and refinements in cognitive modelling regarding principles and mechanisms in the brain and propose a neurocognitively plausible model for embodied language acquisition from real-world interaction of a humanoid robot with its environment. In particular, the architecture consists of a continuous time recurrent neural network, where parts have different leakage characteristics and thus operate on multiple timescales for every modality and the association of the higher level nodes of all modalities into cell assemblies. The model is capable of learning language production grounded in both, temporal dynamic somatosensation and vision, and features hierarchical concept abstraction, concept decomposition, multi-modal integration, and self-organisation of latent representations.

Fork-join and data-driven execution models on multi-core architectures: Case study of the FMM

KAUST Repository

Amer, Abdelhalim; Maruyama, Naoya; Pericà s, Miquel; Taura, Kenjiro; Yokota, Rio; Matsuoka, Satoshi

2013-01-01

Extracting maximum performance of multi-core architectures is a difficult task primarily due to bandwidth limitations of the memory subsystem and its complex hierarchy. In this work, we study the implications of fork-join and data-driven execution

Integrated development environment for multi-core systems

Directory of Open Access Journals (Sweden)

Krunić Momčilo V.

2014-01-01

Full Text Available Development of the software application that provides comfortable working environment of embedded software applications was always a difficult task to achieve. To reach this goal it was necessary to integrate all specific tools designed for that purpose. This paper describes Integrated Development Environment (IDE that was developed to meet all specific needs of a software development for the family of multi-core target platforms designed for a digital signal processing in Cirrus Logic Company. Eclipse platform and RCP (Rich Client Platform was used as a basis, because it provides an extensible plug-in system for customizing the development environment. CLIDE (Cirrus Logic Integrated Development Environment represent the epilog of that effort, reliable IDE used for development of embedded applications. Validation of the solution is accomplished thru 2641 J Unit tests that validate most of the CLIDE's functionalities. Developed IDE (CLIDE significantly increases a quality of a software development for multi-core systems and reduces time-to-market, thereby justifying development costs.

Reference Architecture for Multi-Layer Software Defined Optical Data Center Networks

Directory of Open Access Journals (Sweden)

Casimer DeCusatis

2015-09-01

Full Text Available As cloud computing data centers grow larger and networking devices proliferate; many complex issues arise in the network management architecture. We propose a framework for multi-layer; multi-vendor optical network management using open standards-based software defined networking (SDN. Experimental results are demonstrated in a test bed consisting of three data centers interconnected by a 125 km metropolitan area network; running OpenStack with KVM and VMW are components. Use cases include inter-data center connectivity via a packet-optical metropolitan area network; intra-data center connectivity using an optical mesh network; and SDN coordination of networking equipment within and between multiple data centers. We create and demonstrate original software to implement virtual network slicing and affinity policy-as-a-service offerings. Enhancements to synchronous storage backup; cloud exchanges; and Fibre Channel over Ethernet topologies are also discussed.

Multi-Robot, Multi-Target Particle Swarm Optimization Search in Noisy Wireless Environments

Energy Technology Data Exchange (ETDEWEB)

Kurt Derr; Milos Manic

2009-05-01

Multiple small robots (swarms) can work together using Particle Swarm Optimization (PSO) to perform tasks that are difficult or impossible for a single robot to accomplish. The problem considered in this paper is exploration of an unknown environment with the goal of finding a target(s) at an unknown location(s) using multiple small mobile robots. This work demonstrates the use of a distributed PSO algorithm with a novel adaptive RSS weighting factor to guide robots for locating target(s) in high risk environments. The approach was developed and analyzed on multiple robot single and multiple target search. The approach was further enhanced by the multi-robot-multi-target search in noisy environments. The experimental results demonstrated how the availability of radio frequency signal can significantly affect robot search time to reach a target.

Time Shared Optical Network (TSON): a novel metro architecture for flexible multi-granular services.

Science.gov (United States)

Zervas, Georgios S; Triay, Joan; Amaya, Norberto; Qin, Yixuan; Cervelló-Pastor, Cristina; Simeonidou, Dimitra

2011-12-12

This paper presents the Time Shared Optical Network (TSON) as metro mesh network architecture for guaranteed, statistically-multiplexed services. TSON proposes a flexible and tunable time-wavelength assignment along with one-way tree-based reservation and node architecture. It delivers guaranteed sub-wavelength and multi-granular network services without wavelength conversion, time-slice interchange and optical buffering. Simulation results demonstrate high network utilization, fast service delivery, and low end-to-end delay on a contention-free sub-wavelength optical transport network. In addition, implementation complexity in terms of Layer 2 aggregation, grooming and optical switching has been evaluated. © 2011 Optical Society of America

Flexible feature-space-construction architecture and its VLSI implementation for multi-scale object detection

Science.gov (United States)

Luo, Aiwen; An, Fengwei; Zhang, Xiangyu; Chen, Lei; Huang, Zunkai; Jürgen Mattausch, Hans

2018-04-01

Feature extraction techniques are a cornerstone of object detection in computer-vision-based applications. The detection performance of vison-based detection systems is often degraded by, e.g., changes in the illumination intensity of the light source, foreground-background contrast variations or automatic gain control from the camera. In order to avoid such degradation effects, we present a block-based L1-norm-circuit architecture which is configurable for different image-cell sizes, cell-based feature descriptors and image resolutions according to customization parameters from the circuit input. The incorporated flexibility in both the image resolution and the cell size for multi-scale image pyramids leads to lower computational complexity and power consumption. Additionally, an object-detection prototype for performance evaluation in 65 nm CMOS implements the proposed L1-norm circuit together with a histogram of oriented gradients (HOG) descriptor and a support vector machine (SVM) classifier. The proposed parallel architecture with high hardware efficiency enables real-time processing, high detection robustness, small chip-core area as well as low power consumption for multi-scale object detection.

Wellness health care and the architectural environment.

Science.gov (United States)

Verderber, S; Grice, S; Gutentag, P

1987-01-01

The stress management-wellness health care environment is emerging as a distinct facility type in the 1980s. Yet the idea is not a new one, with roots based in the Greek Asklepieon dating from 480 B.C. This and later Western transformations for health promotion embraced the therapeutic amenity inherent in meditation, solace and communality with nature based on the premise that the need for refuge from the stress inherent in one's daily life is deep-rooted in humans. A two-phase study is reported on wellness health care provider priorities, relative to the architectural features of stress-wellness centers. Representatives of 11 health care organizations responded to a telephone survey questionnaire, and 128 respondents completed a user needs questionnaire. Four major issues were addressed: image and appearance, location and setting, services provided and costs, and patterns of use. Convenience to one's place of work, a balanced mixture of clinical and nonclinical programs, a noninstitutional retreat-like environment, and membership cost structures were found to be major user considerations with respect to planning and design concepts for wellness health care environments. Directions for further research are discussed.

On public space design for Chinese urban residential area based on integrated architectural physics environment evaluation

Science.gov (United States)

Dong, J. Y.; Cheng, W.; Ma, C. P.; Tan, Y. T.; Xin, L. S.

2017-04-01

The residential public space is an important part in designing the ecological residence, and a proper physics environment of public space is of greater significance to urban residence in China. Actually, the measure to apply computer aided design software into residential design can effectively avoid an inconformity of design intent with actual using condition, and a negative impact on users due to bad architectural physics environment of buildings, etc. The paper largely adopts a design method of analyzing architectural physics environment of residential public space. By analyzing and evaluating various physics environments, a suitability assessment is obtained for residential public space, thereby guiding the space design.

Agent-Oriented Privacy-Based Information Brokering Architecture for Healthcare Environments

Directory of Open Access Journals (Sweden)

Abdulmutalib Masaud-Wahaishi

2009-01-01

Full Text Available Healthcare industry is facing a major reform at all levels—locally, regionally, nationally, and internationally. Healthcare services and systems become very complex and comprise of a vast number of components (software systems, doctors, patients, etc. that are characterized by shared, distributed and heterogeneous information sources with varieties of clinical and other settings. The challenge now faced with decision making, and management of care is to operate effectively in order to meet the information needs of healthcare personnel. Currently, researchers, developers, and systems engineers are working toward achieving better efficiency and quality of service in various sectors of healthcare, such as hospital management, patient care, and treatment. This paper presents a novel information brokering architecture that supports privacy-based information gathering in healthcare. Architecturally, the brokering is viewed as a layer of services where a brokering service is modeled as an agent with a specific architecture and interaction protocol that are appropriate to serve various requests. Within the context of brokering, we model privacy in terms of the entities ability to hide or reveal information related to its identities, requests, and/or capabilities. A prototype of the proposed architecture has been implemented to support information-gathering capabilities in healthcare environments using FIPA-complaint platform JADE.

Agent-oriented privacy-based information brokering architecture for healthcare environments.

Science.gov (United States)

Masaud-Wahaishi, Abdulmutalib; Ghenniwa, Hamada

2009-01-01

Healthcare industry is facing a major reform at all levels-locally, regionally, nationally, and internationally. Healthcare services and systems become very complex and comprise of a vast number of components (software systems, doctors, patients, etc.) that are characterized by shared, distributed and heterogeneous information sources with varieties of clinical and other settings. The challenge now faced with decision making, and management of care is to operate effectively in order to meet the information needs of healthcare personnel. Currently, researchers, developers, and systems engineers are working toward achieving better efficiency and quality of service in various sectors of healthcare, such as hospital management, patient care, and treatment. This paper presents a novel information brokering architecture that supports privacy-based information gathering in healthcare. Architecturally, the brokering is viewed as a layer of services where a brokering service is modeled as an agent with a specific architecture and interaction protocol that are appropriate to serve various requests. Within the context of brokering, we model privacy in terms of the entities ability to hide or reveal information related to its identities, requests, and/or capabilities. A prototype of the proposed architecture has been implemented to support information-gathering capabilities in healthcare environments using FIPA-complaint platform JADE.

WebSpy: An Architecture for Monitoring Web Server Availability in a Multi-Platform Environment

Directory of Open Access Journals (Sweden)

Madhan Mohan Thirukonda

2002-01-01

Full Text Available For an electronic business (e-business, customer satisfaction can be the difference between long-term success and short-term failure. Customer satisfaction is highly impacted by Web server availability, as customers expect a Web site to be available twenty-four hours a day and seven days a week. Unfortunately, unscheduled Web server downtime is often beyond the control of the organization. What is needed is an effective means of identifying and recovering from Web server downtime in order to minimize the negative impact on the customer. An automated architecture, called WebSpy, has been developed to notify administration and to take immediate action when Web server downtime is detected. This paper describes the WebSpy architecture and differentiates it from other popular Web monitoring tools. The results of a case study are presented as a means of demonstrating WebSpy's effectiveness in monitoring Web server availability.

Multi-step wind speed forecasting based on a hybrid forecasting architecture and an improved bat algorithm

International Nuclear Information System (INIS)

Xiao, Liye; Qian, Feng; Shao, Wei

2017-01-01

Highlights: • Propose a hybrid architecture based on a modified bat algorithm for multi-step wind speed forecasting. • Improve the accuracy of multi-step wind speed forecasting. • Modify bat algorithm with CG to improve optimized performance. - Abstract: As one of the most promising sustainable energy sources, wind energy plays an important role in energy development because of its cleanliness without causing pollution. Generally, wind speed forecasting, which has an essential influence on wind power systems, is regarded as a challenging task. Analyses based on single-step wind speed forecasting have been widely used, but their results are insufficient in ensuring the reliability and controllability of wind power systems. In this paper, a new forecasting architecture based on decomposing algorithms and modified neural networks is successfully developed for multi-step wind speed forecasting. Four different hybrid models are contained in this architecture, and to further improve the forecasting performance, a modified bat algorithm (BA) with the conjugate gradient (CG) method is developed to optimize the initial weights between layers and thresholds of the hidden layer of neural networks. To investigate the forecasting abilities of the four models, the wind speed data collected from four different wind power stations in Penglai, China, were used as a case study. The numerical experiments showed that the hybrid model including the singular spectrum analysis and general regression neural network with CG-BA (SSA-CG-BA-GRNN) achieved the most accurate forecasting results in one-step to three-step wind speed forecasting.

BASIC LAWS OF FORMATION OF INNOVATION HISTORICAL ARCHITECTURE AND TOWN PLANNING FACILITIES IN URBAN ENVIRONMENT

Directory of Open Access Journals (Sweden)

SMIRNOVA O. V.

2016-06-01

Full Text Available Abstract. Formulation of the problem. Innovative buildings and structures are architectural objects, the distinguishing feature of which is the presence of certain levels of their formation - material and functional (provided certain functional purpose object and its material embodiment, art-shaped (the presence of an individual artistic image structural and process (use of new technologies and fundamentally new design; communication and of environmental (harmonious integration of the object in the environment. Absence of analogues - a prerequisite for innovative buildings. Innovative architectural and urban objects created in the development of civilization. Innovations in design and construction of architectural and urban facilities - this is the final result of the creation (design and development (implementation of a fundamentally new or modified facility satisfies human needs. Purpose. Consider the historical features of formation of innovative architectural and urban facilities in the urban environment. The main objectives - to identify the main types of innovative historical objects and identify patterns of their formation. Conclusions. The main historical innovative architectural and urban facilities were buildings and structures formed during two periods of historical development: in the pre-industrial period and during the industrial revolution.

Methods to Load Balance a GCR Pressure Solver Using a Stencil Framework on Multi- and Many-Core Architectures

Directory of Open Access Journals (Sweden)

Milosz Ciznicki

2015-01-01

Full Text Available The recent advent of novel multi- and many-core architectures forces application programmers to deal with hardware-specific implementation details and to be familiar with software optimisation techniques to benefit from new high-performance computing machines. Extra care must be taken for communication-intensive algorithms, which may be a bottleneck for forthcoming era of exascale computing. This paper aims to present a high-level stencil framework implemented for the EULerian or LAGrangian model (EULAG that efficiently utilises multi- and many-cores architectures. Only an efficient usage of both many-core processors (CPUs and graphics processing units (GPUs with the flexible data decomposition method can lead to the maximum performance that scales the communication-intensive Generalized Conjugate Residual (GCR elliptic solver with preconditioner.

Multi-user data acquisition environment

International Nuclear Information System (INIS)

Storch, N.A.

1983-01-01

The typical data acquisition environment involves data collection and monitoring by a single user. However, in order to support experiments on the Mars facility at Lawrence Livermore National Laboratory, we have had to create a multi-user data acquisition environment where any user can control the data acquisition and several users can monitor and analyze data being collected in real time. This paper describes how we accomplished this on an HP A600 computer. It focuses on the overall system description and user communication with the tasks within the system. Our current implementation is one phase of a long-term software development project

Smashing the Stovepipe: Leveraging the GMSEC Open Architecture and Advanced IT Automation to Rapidly Prototype, Develop and Deploy Next-Generation Multi-Mission Ground Systems

Science.gov (United States)

Swenson, Paul

2017-01-01

Satellite/Payload Ground Systems - Typically highly-customized to a specific mission's use cases - Utilize hundreds (or thousands!) of specialized point-to-point interfaces for data flows / file transfers Documentation and tracking of these complex interfaces requires extensive time to develop and extremely high staffing costs Implementation and testing of these interfaces are even more cost-prohibitive, and documentation often lags behind implementation resulting in inconsistencies down the road With expanding threat vectors, IT Security, Information Assurance and Operational Security have become key Ground System architecture drivers New Federal security-related directives are generated on a daily basis, imposing new requirements on current / existing ground systems - These mandated activities and data calls typically carry little or no additional funding for implementation As a result, Ground System Sustaining Engineering groups and Information Technology staff continually struggle to keep up with the rolling tide of security Advancing security concerns and shrinking budgets are pushing these large stove-piped ground systems to begin sharing resources - I.e. Operational / SysAdmin staff, IT security baselines, architecture decisions or even networks / hosting infrastructure Refactoring these existing ground systems into multi-mission assets proves extremely challenging due to what is typically very tight coupling between legacy components As a result, many "Multi-Mission" ops. environments end up simply sharing compute resources and networks due to the difficulty of refactoring into true multi-mission systems Utilizing continuous integration / rapid system deployment technologies in conjunction with an open architecture messaging approach allows System Engineers and Architects to worry less about the low-level details of interfaces between components and configuration of systems GMSEC messaging is inherently designed to support multi-mission requirements, and

Architectural Theatricality

DEFF Research Database (Denmark)

Tvedebrink, Tenna Doktor Olsen

environments and a knowledge gap therefore exists in present hospital designs. Consequently, the purpose of this thesis has been to investigate if any research-based knowledge exist supporting the hypothesis that the interior architectural qualities of eating environments influence patient food intake, health...... and well-being, as well as outline a set of basic design principles ‘predicting’ the future interior architectural qualities of patient eating environments. Methodologically the thesis is based on an explorative study employing an abductive approach and hermeneutic-interpretative strategy utilizing tactics...... and food intake, as well as a series of references exist linking the interior architectural qualities of healthcare environments with the health and wellbeing of patients. On the basis of these findings, the thesis presents the concept of Architectural Theatricality as well as a set of design principles...

Usage of Thin-Client/Server Architecture in Computer Aided Education

Science.gov (United States)

Cimen, Caghan; Kavurucu, Yusuf; Aydin, Halit

2014-01-01

With the advances of technology, thin-client/server architecture has become popular in multi-user/single network environments. Thin-client is a user terminal in which the user can login to a domain and run programs by connecting to a remote server. Recent developments in network and hardware technologies (cloud computing, virtualization, etc.)…

A multi-agent architecture for sharing knowledge and experimental data about waste water treatment plants through the Internet

International Nuclear Information System (INIS)

Abu Yaman, I. R.; Kerckhoffs, J. E.

1998-01-01

In this paper, we present a first prototype of a local multi-agent architecture for the sharing of knowledge and experimental data about waste water treatment plants through the Internet, or more specifically the WWW. Applying a net browser such as nets cape, a user can have access to a CLIPS expert system (advising on waste water cleaning technologies) and experimental data files. The discussed local prototype is part of proposed global agent architecture. (authors)

A Heterogeneous Multi-core Architecture with a Hardware Kernel for Control Systems

DEFF Research Database (Denmark)

Li, Gang; Guan, Wei; Sierszecki, Krzysztof

2012-01-01

Rapid industrialisation has resulted in a demand for improved embedded control systems with features such as predictability, high processing performance and low power consumption. Software kernel implementation on a single processor is becoming more difficult to satisfy those constraints....... This paper presents a multi-core architecture incorporating a hardware kernel on FPGAs, intended for high performance applications in control engineering domain. First, the hardware kernel is investigated on the basis of a component-based real-time kernel HARTEX (Hard Real-Time Executive for Control Systems...

Information Integration Architecture Development

OpenAIRE

Faulkner, Stéphane; Kolp, Manuel; Nguyen, Duy Thai; Coyette, Adrien; Do, Thanh Tung; 16th International Conference on Software Engineering and Knowledge Engineering

2004-01-01

Multi-Agent Systems (MAS) architectures are gaining popularity for building open, distributed, and evolving software required by systems such as information integration applications. Unfortunately, despite considerable work in software architecture during the last decade, few research efforts have aimed at truly defining patterns and languages for designing such multiagent architectures. We propose a modern approach based on organizational structures and architectural description lan...

The NILE system architecture: fault-tolerant, wide-area access to computing and data resources

International Nuclear Information System (INIS)

Ricciardi, Aleta; Ogg, Michael; Rothfus, Eric

1996-01-01

NILE is a multi-disciplinary project building a distributed computing environment for HEP. It provides wide-area, fault-tolerant, integrated access to processing and data resources for collaborators of the CLEO experiment, though the goals and principles are applicable to many domains. NILE has three main objectives: a realistic distributed system architecture design, the design of a robust data model, and a Fast-Track implementation providing a prototype design environment which will also be used by CLEO physicists. This paper focuses on the software and wide-area system architecture design and the computing issues involved in making NILE services highly-available. (author)

Development of System Architecture to Investigate the Impact of Integrated Air and Missile Defense in a Distributed Lethality Environment

Science.gov (United States)

2017-12-01

SYSTEM ARCHITECTURE TO INVESTIGATE THE IMPACT OF INTEGRATED AIR AND MISSILE DEFENSE IN A DISTRIBUTED LETHALITY ENVIRONMENT by Justin K. Davis...TO INVESTIGATE THE IMPACT OF INTEGRATED AIR AND MISSILE DEFENSE IN A DISTRIBUTED LETHALITY ENVIRONMENT 5. FUNDING NUMBERS 6. AUTHOR(S) Justin K...ARCHITECTURE TO INVESTIGATE THE IMPACT OF INTEGRATED AIR AND MISSILE DEFENSE IN A DISTRIBUTED LETHALITY ENVIRONMENT Justin K. Davis Lieutenant

A Multi-Agent Environment for Negotiation

Science.gov (United States)

Hindriks, Koen V.; Jonker, Catholijn M.; Tykhonov, Dmytro

In this chapter we introduce the System for Analysis of Multi-Issue Negotiation (SAMIN). SAMIN offers a negotiation environment that supports and facilitates the setup of various negotiation setups. The environment has been designed to analyse negotiation processes between human negotiators, between human and software agents, and between software agents. It offers a range of different agents, different domains, and other options useful to define a negotiation setup. The environment has been used to test and evaluate a range of negotiation strategies in various domains playing against other negotiating agents as well as humans. We discuss some of the results obtained by means of these experiments.

Fractionated Spacecraft Architectures Seeding Study

National Research Council Canada - National Science Library

Mathieu, Charlotte; Weigel, Annalisa

2006-01-01

.... Models were developed from a customer-centric perspective to assess different fractionated spacecraft architectures relative to traditional spacecraft architectures using multi-attribute analysis...

Altering micro-environments to change population health behaviour: towards an evidence base for choice architecture interventions

Science.gov (United States)

2013-01-01

Background The idea that behaviour can be influenced at population level by altering the environments within which people make choices (choice architecture) has gained traction in policy circles. However, empirical evidence to support this idea is limited, especially its application to changing health behaviour. We propose an evidence-based definition and typology of choice architecture interventions that have been implemented within small-scale micro-environments and evaluated for their effects on four key sets of health behaviours: diet, physical activity, alcohol and tobacco use. Discussion We argue that the limitations of the evidence base are due not simply to an absence of evidence, but also to a prior lack of definitional and conceptual clarity concerning applications of choice architecture to public health intervention. This has hampered the potential for systematic assessment of existing evidence. By seeking to address this issue, we demonstrate how our definition and typology have enabled systematic identification and preliminary mapping of a large body of available evidence for the effects of choice architecture interventions. We discuss key implications for further primary research, evidence synthesis and conceptual development to support the design and evaluation of such interventions. Summary This conceptual groundwork provides a foundation for future research to investigate the effectiveness of choice architecture interventions within micro-environments for changing health behaviour. The approach we used may also serve as a template for mapping other under-explored fields of enquiry. PMID:24359583

Neurophysiological correlates of embodiment and motivational factors during the perception of virtual architectural environments.

Science.gov (United States)

Vecchiato, Giovanni; Jelic, Andrea; Tieri, Gaetano; Maglione, Anton Giulio; De Matteis, Federico; Babiloni, Fabio

2015-09-01

The recent efforts aimed at providing neuroscientific explanations of how people perceive and experience architectural environments have largely justified the initial belief in the value of neuroscience for architecture. However, a systematic development of a coherent theoretical and experimental framework is missing. To investigate the neurophysiological reactions related to the appreciation of ambiances, we recorded the electroencephalographic (EEG) signals in an immersive virtual reality during the appreciation of interior designs. Such data have been analyzed according to the working hypothesis that appreciated environments involve embodied simulation mechanisms and circuits mediating approaching stimuli. EEG recordings of 12 healthy subjects have been performed during the perception of three-dimensional interiors that have been simulated in a CAVE system and judged according to dimensions of familiarity, novelty, comfort, pleasantness, arousal and presence. A correlation analysis on personal judgments returned that scores of novelty, pleasantness and comfort are positively correlated, while familiarity and novelty are in negative way. Statistical spectral maps reveal that pleasant, novel and comfortable interiors produce a de-synchronization of the mu rhythm over left sensorimotor areas. Interiors judged more pleasant and less familiar generate an activation of left frontal areas (theta and alpha bands), along an involvement of areas devoted to spatial navigation. An increase in comfort returns an enhancement of the theta frontal midline activity. Cerebral activations underlying appreciation of architecture could involve different mechanisms regulating corporeal, emotional and cognitive reactions. Therefore, it might be suggested that people's experience of architectural environments is intrinsically structured by the possibilities for action.

Parallel processing architecture for H.264 deblocking filter on multi-core platforms

Science.gov (United States)

Prasad, Durga P.; Sonachalam, Sekar; Kunchamwar, Mangesh K.; Gunupudi, Nageswara Rao

2012-03-01

Massively parallel computing (multi-core) chips offer outstanding new solutions that satisfy the increasing demand for high resolution and high quality video compression technologies such as H.264. Such solutions not only provide exceptional quality but also efficiency, low power, and low latency, previously unattainable in software based designs. While custom hardware and Application Specific Integrated Circuit (ASIC) technologies may achieve lowlatency, low power, and real-time performance in some consumer devices, many applications require a flexible and scalable software-defined solution. The deblocking filter in H.264 encoder/decoder poses difficult implementation challenges because of heavy data dependencies and the conditional nature of the computations. Deblocking filter implementations tend to be fixed and difficult to reconfigure for different needs. The ability to scale up for higher quality requirements such as 10-bit pixel depth or a 4:2:2 chroma format often reduces the throughput of a parallel architecture designed for lower feature set. A scalable architecture for deblocking filtering, created with a massively parallel processor based solution, means that the same encoder or decoder will be deployed in a variety of applications, at different video resolutions, for different power requirements, and at higher bit-depths and better color sub sampling patterns like YUV, 4:2:2, or 4:4:4 formats. Low power, software-defined encoders/decoders may be implemented using a massively parallel processor array, like that found in HyperX technology, with 100 or more cores and distributed memory. The large number of processor elements allows the silicon device to operate more efficiently than conventional DSP or CPU technology. This software programing model for massively parallel processors offers a flexible implementation and a power efficiency close to that of ASIC solutions. This work describes a scalable parallel architecture for an H.264 compliant deblocking

What are Applications in Multi-Surface Environments

DEFF Research Database (Denmark)

Eagan, James R.; Lecolinet, Eric; Klokmose, Clemens Nylandsted

Multi-surface environments, which may contain any combination of large, high-resolution display walls (powerwalls), interactive tabletops, xed computing infrastructure, laptops, tablets, and smartphones all linked together, oer a rich opportunity for new interactions and collaboration. Creating...

VIGO: Instrumental Interaction in Multi-Surface Environments

DEFF Research Database (Denmark)

Klokmose, Clemens Nylandsted; Beaudouin-Lafon, Michel

2009-01-01

This paper addresses interaction in multi-surface environments and questions whether the current application-centric approaches to user interfaces are adequate in this context, and presents an alternative approach based on instrumental interaction. The paper presents the VIGO (Views, Instruments...

mAgic-FPU and MADE: A customizable VLIW core and the modular VLIW processor architecture description environment

Science.gov (United States)

Paolucci, Pier S.; Kajfasz, Philippe; Bonnot, Philippe; Candaele, Bernard; Maufroid, Daniel; Pastorelli, Elena; Ricciardi, Andrea; Fusella, Yves; Guarino, Eugenio

2001-09-01

mAgic-FPU is the architecture of a family of VLIW cores for configurable system level integration of floating and fixed point computing power. mAgic customization permits the designer to tune basic parameters, such as the computing power/memory access ratio of the core processor, the number of available arithmetic operation per cycle, the register file size and number of port, as well as of the number of arithmetic operators. The reconfiguration (e.g., of register file size and number of port, as well as of the number of arithmetic operators) is supported by the software environment MADE (Modular VLIW processor Architecture and Assembler Description Environment). MADE reads an architecture description file and produces a customized assembler-scheduler for the target VLIW architecture, configuring a general purpose VLIW optimizer-scheduler engine. The mAgic-FPU core architecture satisfies the requisite of portability among silicon foundries. The first members of the mAgic FPU core family architecture fit the requirements of 'Smart Antenna for Adaptive Beam-Forming processing' and 'Physical Sound Synthesis'. The first 1 GigaFlops mAgic core will run at 100 MHz within an area of 40 mm 2 in 0.25 μm ATMEL CMOS technology in first half 2002.

Defining inter-cloud architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.; de Laat, C.; Zimmermann, W.; Lee, Y.W.; Demchenko, Y.

2012-01-01

This paper presents an on-going research to develop the Inter-Cloud Architecture, which addresses the architectural problems in multi-provider multi-domain heterogeneous cloud based applications integration and interoperability, including integration and interoperability with legacy infrastructure

Renaissance Architecture of Central Scheme: Jerónimo Quijano and his Immediate Environment

Directory of Open Access Journals (Sweden)

Antonio Luis López González

2015-10-01

As references to Quijano´s architectural approach in his Hispanic environment, it should reflect upon certain reminiscences to Renaissance works in Eastern Andalusia, his direct influence in the Government of Orihuela and subsequently some of his possible influences in the Valencian territory.

Architectural Design and the Learning Environment: A Framework for School Design Research

Science.gov (United States)

Gislason, Neil

2010-01-01

This article develops a theoretical framework for studying how instructional space, teaching and learning are related in practice. It is argued that a school's physical design can contribute to the quality of the learning environment, but several non-architectural factors also determine how well a given facility serves as a setting for teaching…

Implicit Unstructured Aerodynamics on Emerging Multi- and Many-Core HPC Architectures

KAUST Repository

Al Farhan, Mohammed A.

2017-03-13

Shared memory parallelization of PETSc-FUN3D, an unstructured tetrahedral mesh Euler code previously characterized for distributed memory Single Program, Multiple Data (SPMD) for thousands of nodes, is hybridized with shared memory Single Instruction, Multiple Data (SIMD) for hundreds of threads per node. We explore thread-level performance optimizations on state-of-the-art multi- and many-core Intel processors, including the second generation of Xeon Phi, Knights Landing (KNL). We study the performance on the KNL with different configurations of memory and cluster modes, with code optimizations to minimize indirect addressing and enhance the cache locality. The optimizations employed are expected to be of value other unstructured applications as many-core architecture evolves.

A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs.

Science.gov (United States)

Wei, Xiaohui; Sun, Bingyi; Cui, Jiaxu; Xu, Gaochao

2016-01-01

As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture.

A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs.

Directory of Open Access Journals (Sweden)

Xiaohui Wei

Full Text Available As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri. This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture.

A Multi-Sensor Acquisition Architecture and Real-Time Reference for Sensor and Fusion Methods Benchmarking

OpenAIRE

KAIS, Mikaël; MILLESCAMPS, Damien; BETAILLE, David; LUSETTI, Benoît; CHAPELON, Antoine

2006-01-01

Localization is a key functionality for Advance Driving Assistance Systems (ADAS) as well as for Vehicle-Vehicle or Vehicle-Infrastructure cooperation. Indeed, depending on the accuracy and integrity of the localization process, applications such as driver information, driver assistance or even fully autonomous driving can be performed. This paper presents a multi-sensor acquisition architecture for localization. Special attention has been given to main parameters that can affect the accuracy...

Ragnarok: An Architecture Based Software Development Environment

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

of the development process. The main contributions presented in the thesis have evolved from work with two of the hypotheses: These address the problems of management of evolution, and overview, comprehension and navigation respectively. The first main contribution is the Architectural Software Configuration...... Management Model: A software configuration management model where the abstractions and hierarchy of the logical aspect of software architecture forms the basis for version control and configuration management. The second main contribution is the Geographic Space Architecture Visualisation Model......: A visualisation model where entities in a software architecture are organised geographically in a two-dimensional plane, their visual appearance determined by processing a subset of the data in the entities, and interaction with the project's underlying data performed by direct manipulation of the landscape...

The Virtual Environment for Reactor Applications (VERA): Design and architecture

International Nuclear Information System (INIS)

Turner, John A.; Clarno, Kevin; Sieger, Matt; Bartlett, Roscoe; Collins, Benjamin; Pawlowski, Roger; Schmidt, Rodney; Summers, Randall

2016-01-01

VERA, the Virtual Environment for Reactor Applications, is the system of physics capabilities being developed and deployed by the Consortium for Advanced Simulation of Light Water Reactors (CASL). CASL was established for the modeling and simulation of commercial nuclear reactors. VERA consists of integrating and interfacing software together with a suite of physics components adapted and/or refactored to simulate relevant physical phenomena in a coupled manner. VERA also includes the software development environment and computational infrastructure needed for these components to be effectively used. We describe the architecture of VERA from both software and numerical perspectives, along with the goals and constraints that drove major design decisions, and their implications. We explain why VERA is an environment rather than a framework or toolkit, why these distinctions are relevant (particularly for coupled physics applications), and provide an overview of results that demonstrate the use of VERA tools for a variety of challenging applications within the nuclear industry.

The Virtual Environment for Reactor Applications (VERA): Design and architecture

Energy Technology Data Exchange (ETDEWEB)

Turner, John A., E-mail: turnerja@ornl.gov [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Clarno, Kevin; Sieger, Matt; Bartlett, Roscoe; Collins, Benjamin [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Pawlowski, Roger; Schmidt, Rodney; Summers, Randall [Sandia National Laboratories, Albuquerque, NM 87185 (United States)

2016-12-01

VERA, the Virtual Environment for Reactor Applications, is the system of physics capabilities being developed and deployed by the Consortium for Advanced Simulation of Light Water Reactors (CASL). CASL was established for the modeling and simulation of commercial nuclear reactors. VERA consists of integrating and interfacing software together with a suite of physics components adapted and/or refactored to simulate relevant physical phenomena in a coupled manner. VERA also includes the software development environment and computational infrastructure needed for these components to be effectively used. We describe the architecture of VERA from both software and numerical perspectives, along with the goals and constraints that drove major design decisions, and their implications. We explain why VERA is an environment rather than a framework or toolkit, why these distinctions are relevant (particularly for coupled physics applications), and provide an overview of results that demonstrate the use of VERA tools for a variety of challenging applications within the nuclear industry.

Evaluating the Physical Environment of Design Studios: A Case study in Malaysian Private Architecture Schools

OpenAIRE

Shanthi Muniandy; Tareef Hayat Khan; Abdullah Sani Ahmad

2015-01-01

Understanding the notion of learner’s experiences in the design of physical environment of an architecture design studio is a necessity as it contains certain values of influence. It is due to the unique learning experiences which are accrued particularly in design studio that is continued during professional practice as well. Most architectural campuses in Malaysian Private Higher Education Institutions (MPHEI) are devoid of certain important elements and this issue needs to be looked into s...

Lightweight enterprise architectures

CERN Document Server

Theuerkorn, Fenix

2004-01-01

STATE OF ARCHITECTUREArchitectural ChaosRelation of Technology and Architecture The Many Faces of Architecture The Scope of Enterprise Architecture The Need for Enterprise ArchitectureThe History of Architecture The Current Environment Standardization Barriers The Need for Lightweight Architecture in the EnterpriseThe Cost of TechnologyThe Benefits of Enterprise Architecture The Domains of Architecture The Gap between Business and ITWhere Does LEA Fit? LEA's FrameworkFrameworks, Methodologies, and Approaches The Framework of LEATypes of Methodologies Types of ApproachesActual System Environmen

Numerical linear algebra on emerging architectures: The PLASMA and MAGMA projects

International Nuclear Information System (INIS)

Agullo, Emmanuel; Demmel, Jim; Dongarra, Jack; Hadri, Bilel; Kurzak, Jakub; Langou, Julien; Ltaief, Hatem; Luszczek, Piotr; Tomov, Stanimire

2009-01-01

The emergence and continuing use of multi-core architectures and graphics processing units require changes in the existing software and sometimes even a redesign of the established algorithms in order to take advantage of now prevailing parallelism. Parallel Linear Algebra for Scalable Multi-core Architectures (PLASMA) and Matrix Algebra on GPU and Multics Architectures (MAGMA) are two projects that aims to achieve high performance and portability across a wide range of multi-core architectures and hybrid systems respectively. We present in this document a comparative study of PLASMA's performance against established linear algebra packages and some preliminary results of MAGMA on hybrid multi-core and GPU systems.

Enabling Co-Design of Multi-Layer Exascale Storage Architectures

Energy Technology Data Exchange (ETDEWEB)

Carothers, Christopher [Rensselaer Polytechnic Inst., Troy, NY (United States)

2015-08-31

Growing demands for computing power in applications such as energy production, climate analysis, computational chemistry, and bioinformatics have propelled computing systems toward the exascale: systems with 10¹⁸ floating-point operations per second. These systems, to be designed and constructed over the next decade, will create unprecedented challenges in component counts, power consumption, resource limitations, and system complexity. Data storage and access are an increasingly important and complex component in extreme-scale computing systems, and significant design work is needed to develop successful storage hardware and software architectures at exascale. Co-design of these systems will be necessary to find the best possible design points for exascale systems. The goal of this work has been to enable the exploration and co-design of exascale storage systems by providing a detailed, accurate, and highly parallel simulation of exascale storage and the surrounding environment. Specifically, this simulation has (1) portrayed realistic application checkpointing and analysis workloads, (2) captured the complexity, scale, and multilayer nature of exascale storage hardware and software, and (3) executed in a timeframe that enables “what if'” exploration of design concepts. We developed models of the major hardware and software components in an exascale storage system, as well as the application I/O workloads that drive them. We used our simulation system to investigate critical questions in reliability and concurrency at exascale, helping guide the design of future exascale hardware and software architectures. Additionally, we provided this system to interested vendors and researchers so that others can explore the design space. We validated the capabilities of our simulation environment by configuring the simulation to represent the Argonne Leadership Computing Facility Blue Gene/Q system and comparing simulation results for application I

THE ARCHITECTURE OF MULTI-COMPONENT DISTRIBUTED HYBRID EXPERT TRAINING SYSTEM

Directory of Open Access Journals (Sweden)

Оleh Shevchuk

2016-09-01

Full Text Available The paper reports on the design of a multi-component architecture of distributed hybrid expert training system that can be used for the study of knowledge base of both internal and external expert systems and artificial intelligence systems that are distributed on Internet servers and other computer networks. Expert training system is based on three groups of basic principles: cybernetic, reflecting experience of previous research of systems of artificial intelligence, expert training systems; pedagogical, determining the principles, on which pedagogical design and use of expert training systems are based; psychological, determining preconditious and understanding of pupils psychics, on which the processes of design and use of expert training systems in professional training of future specialists are based.It accounts for the efficient training through the distributed knowledge via the Internet, which greatly increases the didactic capabilities of the system.

Environment model creation and ADAS architecture for trucks : design and implementation of a sensor fusion algorithm

NARCIS (Netherlands)

Stamatopoulos, E.

2016-01-01

This report presents a structural approach for environment model creation and ADAS architecture for trucks. In particular, an appropriate sensor suite that is suitable for a set of ADAS functions is defined. On this basis, the development of a proof of concept for an Environment Model system, by

MATE. Multi Aircraft Training Environment

DEFF Research Database (Denmark)

Hauland, G.; Bove, T.; Andersen, Henning Boje

2002-01-01

A medium fidelity and low cost training device for pilots, called the Multi Aircraft Training Environment (MATE), is developed to replace other low fidelity stand-alone training devices and integrate them into a flexible environment, primarily aimed attraining pilots in checklist procedures....../models to be simulated) and with possibilities for including various forms of intelligent computer assistance. This training concept and the technology are not specific toaviation, but can be used to simulate various types of control panels in different domains. The training effectiveness of pilots' procedure training...... in the MATE prototype was compared with the effects of traditional training that included the use of realaircraft. The experimental group (EXP) trained the pre-start checklist and the engine start checklist for the Saab 340 commuter aircraft in a MATE prototype. The control group (CTR) trained the same...

Multi-robot team design for real-world applications

Energy Technology Data Exchange (ETDEWEB)

Parker, L.E.

1996-10-01

Many of these applications are in dynamic environments requiring capabilities distributed in functionality, space, or time, and therefore often require teams of robots to work together. While much research has been done in recent years, current robotics technology is still far from achieving many of the real world applications. Two primary reasons for this technology gap are that (1) previous work has not adequately addressed the issues of fault tolerance and adaptivity in multi-robot teams, and (2) existing robotics research is often geared at specific applications and is not easily generalized to different, but related, applications. This paper addresses these issues by first describing the design issues of key importance in these real-world cooperative robotics applications: fault tolerance, reliability, adaptivity, and coherence. We then present a general architecture addressing these design issues (called ALLIANCE) that facilities multi-robot cooperation of small- to medium-sized teams in dynamic environments, performing missions composed of loosely coupled subtasks. We illustrate an implementation of ALLIANCE in a real-world application, called Bounding Overwatch, and then discuss how this architecture addresses our key design issues.

Homeostatic Agent for General Environment

Science.gov (United States)

Yoshida, Naoto

2018-03-01

One of the essential aspect in biological agents is dynamic stability. This aspect, called homeostasis, is widely discussed in ethology, neuroscience and during the early stages of artificial intelligence. Ashby's homeostats are general-purpose learning machines for stabilizing essential variables of the agent in the face of general environments. However, despite their generality, the original homeostats couldn't be scaled because they searched their parameters randomly. In this paper, first we re-define the objective of homeostats as the maximization of a multi-step survival probability from the view point of sequential decision theory and probabilistic theory. Then we show that this optimization problem can be treated by using reinforcement learning algorithms with special agent architectures and theoretically-derived intrinsic reward functions. Finally we empirically demonstrate that agents with our architecture automatically learn to survive in a given environment, including environments with visual stimuli. Our survival agents can learn to eat food, avoid poison and stabilize essential variables through theoretically-derived single intrinsic reward formulations.

Ionising radiations - an ecological problem of indoor architectural environment

International Nuclear Information System (INIS)

Djukanovic, M.

1995-01-01

Architectural buildings are assessed not only for their esthetic characteristics but human settlements are considered now, as ecosystems and homes and flats as habitats (bio tops). Because of that healthy environment and influences of nonpolluting factors are of a great importance. The use of appropriate building materials harmless to health, contrary to the use of those that emit radon with its ionising effects and consequent health hazards, is of a great importance, too. The purpose of this paper is to emphasize the importance of investigation of building materials before their use, as well as the importance of quality control of soil where the construction is planned. (author)

Electroencephalographic Correlates of Sensorimotor Integration and Embodiment during the Appreciation of Virtual Architectural Environments.

Science.gov (United States)

Vecchiato, Giovanni; Tieri, Gaetano; Jelic, Andrea; De Matteis, Federico; Maglione, Anton G; Babiloni, Fabio

2015-01-01

Nowadays there is the hope that neuroscientific findings will contribute to the improvement of building design in order to create environments which satisfy man's demands. This can be achieved through the understanding of neurophysiological correlates of architectural perception. To this aim, the electroencephalographic (EEG) signals of 12 healthy subjects were recorded during the perception of three immersive virtual reality environments (VEs). Afterwards, participants were asked to describe their experience in terms of Familiarity, Novelty, Comfort, Pleasantness, Arousal, and Presence using a rating scale from 1 to 9. These perceptual dimensions are hypothesized to influence the pattern of cerebral spectral activity, while Presence is used to assess the realism of the virtual stimulation. Hence, the collected scores were used to analyze the Power Spectral Density (PSD) of the EEG for each behavioral dimension in the theta, alpha and mu bands by means of time-frequency analysis and topographic statistical maps. Analysis of Presence resulted in the activation of the frontal-midline theta, indicating the involvement of sensorimotor integration mechanisms when subjects expressed to feel more present in the VEs. Similar patterns also characterized the experience of familiar and comfortable VEs. In addition, pleasant VEs increased the theta power across visuomotor circuits and activated the alpha band in areas devoted to visuospatial exploration and processing of categorical spatial relations. Finally, the de-synchronization of the mu rhythm described the perception of pleasant and comfortable VEs, showing the involvement of left motor areas and embodied mechanisms for environment appreciation. Overall, these results show the possibility to measure EEG correlates of architectural perception involving the cerebral circuits of sensorimotor integration, spatial navigation, and embodiment. These observations can help testing architectural hypotheses in order to design

Proof of Concept Integration of a Single-Level Service-Oriented Architecture into a Multi-Domain Secure Environment

National Research Council Canada - National Science Library

Gilkey, Craig M

2008-01-01

.... A SOA software platform integrates independent, unrelated applications into a common architecture, thereby introducing data reuse, interoperability, and loose coupling between the services involved. The U.S...

A flexible data fusion architecture for persistent surveillance using ultra-low-power wireless sensor networks

Science.gov (United States)

Hanson, Jeffrey A.; McLaughlin, Keith L.; Sereno, Thomas J.

2011-06-01

We have developed a flexible, target-driven, multi-modal, physics-based fusion architecture that efficiently searches sensor detections for targets and rejects clutter while controlling the combinatoric problems that commonly arise in datadriven fusion systems. The informational constraints imposed by long lifetime requirements make systems vulnerable to false alarms. We demonstrate that our data fusion system significantly reduces false alarms while maintaining high sensitivity to threats. In addition, mission goals can vary substantially in terms of targets-of-interest, required characterization, acceptable latency, and false alarm rates. Our fusion architecture provides the flexibility to match these trade-offs with mission requirements unlike many conventional systems that require significant modifications for each new mission. We illustrate our data fusion performance with case studies that span many of the potential mission scenarios including border surveillance, base security, and infrastructure protection. In these studies, we deployed multi-modal sensor nodes - including geophones, magnetometers, accelerometers and PIR sensors - with low-power processing algorithms and low-bandwidth wireless mesh networking to create networks capable of multi-year operation. The results show our data fusion architecture maintains high sensitivities while suppressing most false alarms for a variety of environments and targets.

Debugging in a multi-processor environment

International Nuclear Information System (INIS)

Spann, J.M.

1981-01-01

The Supervisory Control and Diagnostic System (SCDS) for the Mirror Fusion Test Facility (MFTF) consists of nine 32-bit minicomputers arranged in a tightly coupled distributed computer system utilizing a share memory as the data exchange medium. Debugging of more than one program in the multi-processor environment is a difficult process. This paper describes what new tools were developed and how the testing of software is performed in the SCDS for the MFTF project

Sensor Architecture and Task Classification for Agricultural Vehicles and Environments

Directory of Open Access Journals (Sweden)

Francisco Rovira-Más

2010-12-01

Full Text Available The long time wish of endowing agricultural vehicles with an increasing degree of autonomy is becoming a reality thanks to two crucial facts: the broad diffusion of global positioning satellite systems and the inexorable progress of computers and electronics. Agricultural vehicles are currently the only self-propelled ground machines commonly integrating commercial automatic navigation systems. Farm equipment manufacturers and satellite-based navigation system providers, in a joint effort, have pushed this technology to unprecedented heights; yet there are many unresolved issues and an unlimited potential still to uncover. The complexity inherent to intelligent vehicles is rooted in the selection and coordination of the optimum sensors, the computer reasoning techniques to process the acquired data, and the resulting control strategies for automatic actuators. The advantageous design of the network of onboard sensors is necessary for the future deployment of advanced agricultural vehicles. This article analyzes a variety of typical environments and situations encountered in agricultural fields, and proposes a sensor architecture especially adapted to cope with them. The strategy proposed groups sensors into four specific subsystems: global localization, feedback control and vehicle pose, non-visual monitoring, and local perception. The designed architecture responds to vital vehicle tasks classified within three layers devoted to safety, operative information, and automatic actuation. The success of this architecture, implemented and tested in various agricultural vehicles over the last decade, rests on its capacity to integrate redundancy and incorporate new technologies in a practical way.

IoT Architecture for a Sustainable Tourism Application in a Smart City Environment

Directory of Open Access Journals (Sweden)

Michele Nitti

2017-01-01

Full Text Available In the past few years, the Smart Cities concept has become one of the main driving forces for the urban transition towards a low carbon environment, sustainable economy, and mobility. Tourism, as one of the fastest growing industries, is also an important generator of carbon emissions; therefore, the recently emerging sustainable tourism concept is envisioned as an important part of the Smart Cities paradigm. Within this context, the Internet-of-Things (IoT concept is the key technological point for the development of smart urban environments through the use of aggregated data, integrated in a single decisional platform. This paper performs the first analysis on the feasibility of the use of an IoT approach and proposes a specific architecture for a sustainable tourism application. The architecture is tailored for the optimisation of the movement of cruise ship tourists in the city of Cagliari (Italy, by taking into consideration factors such as transport information and queue waiting times. A first set of simulations is performed using 67-point of interest, real transportation data, and an optimisation algorithm.

Measuring Conflict in a Multi-Source Environment as a Normal Measure

OpenAIRE

Wei, Pan; Ball, John E.; Anderson, Derek T.; Harsh, Archit; Archibald, Christopher

2018-01-01

In a multi-source environment, each source has its own credibility. If there is no external knowledge about credibility then we can use the information provided by the sources to assess their credibility. In this paper, we propose a way to measure conflict in a multi-source environment as a normal measure. We examine our algorithm using three simulated examples of increasing conflict and one experimental example. The results demonstrate that the proposed measure can represent conflict in a me...

Multi-agent framework for negotiation in a closed environment

Science.gov (United States)

Cretan, Adina; Coutinho, Carlos; Bratu, Ben; Jardim-Goncalves, Ricardo

2013-10-01

The goal of this paper is to offer support for small and medium enterprises which cannot or do not want to fulfill a big contract alone. Each organization has limited resources and in order to better accomplish a higher external demand, the managers are forced to outsource parts of their contracts even to concurrent organizations. In this concurrent environment each enterprise wants to preserve its decision autonomy and to disclose as little as possible from its business information. To describe this interaction, our approach is to define a framework for managing parallel and concurrent negotiations among independent organizations acting in the same industrial market. The complexity of our negotiation framework is done by the dynamic environment in which multi-attribute and multi-participant negotiations are racing over the same set of resources. Moreover, the proposed framework helps the organizations within the collaborative networked environment to augment their efficiency and ability to react to unforeseen situations, thus improving their market competitiveness.

Elements of Architecture

DEFF Research Database (Denmark)

Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...

Systems architecture: a new model for sustainability and the built environment using nanotechnology, biotechnology, information technology, and cognitive science with living technology.

Science.gov (United States)

Armstrong, Rachel

2010-01-01

This report details a workshop held at the Bartlett School of Architecture, University College London, to initiate interdisciplinary collaborations for the practice of systems architecture, which is a new model for the generation of sustainable architecture that combines the discipline of the study of the built environment with the scientific study of complexity, or systems science, and adopts the perspective of systems theory. Systems architecture offers new perspectives on the organization of the built environment that enable architects to consider architecture as a series of interconnected networks with embedded links into natural systems. The public workshop brought together architects and scientists working with the convergence of nanotechnology, biotechnology, information technology, and cognitive science and with living technology to investigate the possibility of a new generation of smart materials that are implied by this approach.

Developing a System Architecture for Holonic Shop Floor Control

DEFF Research Database (Denmark)

Sørensen, Christian; Langer, Gilad; Alting, Leo

1998-01-01

This paper describes the results of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular its corresponding reference architecture serves as the basis for the development of a system-architecture for shop floor control systems in a multi-cellular c......This paper describes the results of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular its corresponding reference architecture serves as the basis for the development of a system-architecture for shop floor control systems in a multi...

SaaS architecture and pricing models

OpenAIRE

Laatikainen, Gabriella; Ojala, Arto

2014-01-01

In the new era of computing, SaaS software with different architectural characteristics might be priced in different ways. Even though both pricing and architectural characteristics are responsible for the success of the offering; the relationship between architectural and pricing characteristics has not been studied before. The present study fills this gap by employing a multi-case research. The findings accentuate that flexible and well-designed architecture enables different pricing models...

Architecture of Schools: The New Learning Environments.

Science.gov (United States)

Dudek, Mark

This guide focuses on the architecture of the primary and pre-school sector in the United Kingdom and broadly considers the subtle spatial and psychological requirements of growing children up to, and beyond, the age of sixteen. Chapter 1 examines the history, origins, and significant historical developments of school architecture, along with an…

A Robotic Coach Architecture for Elder Care (ROCARE) Based on Multi-User Engagement Models.

Science.gov (United States)

Fan, Jing; Bian, Dayi; Zheng, Zhi; Beuscher, Linda; Newhouse, Paul A; Mion, Lorraine C; Sarkar, Nilanjan

2017-08-01

The aging population with its concomitant medical conditions, physical and cognitive impairments, at a time of strained resources, establishes the urgent need to explore advanced technologies that may enhance function and quality of life. Recently, robotic technology, especially socially assistive robotics has been investigated to address the physical, cognitive, and social needs of older adults. Most system to date have predominantly focused on one-on-one human robot interaction (HRI). In this paper, we present a multi-user engagement-based robotic coach system architecture (ROCARE). ROCARE is capable of administering both one-on-one and multi-user HRI, providing implicit and explicit channels of communication, and individualized activity management for long-term engagement. Two preliminary feasibility studies, a one-on-one interaction and a triadic interaction with two humans and a robot, were conducted and the results indicated potential usefulness and acceptance by older adults, with and without cognitive impairment.

Architecture of the Product State Model Environment

DEFF Research Database (Denmark)

Holm Larsen, Michael; Lynggaard, Hans Jørgen B.

2003-01-01

on thedevelopment activities of the PSM architecture. An example discusses how to handle product relatedinformation on the shop floor in a manufacturing company and focuses on how dynamically updatedproduct data can improve control of production activities. This prototype example of welding a jointbetween two steel...... plates serves as proof of concept for the PSM architecture....

Service-Oriented Architecture (SOA) Instantiation within a Hard Real-Time, Deterministic Combat System Environment

Science.gov (United States)

Moreland, James D., Jr

2013-01-01

This research investigates the instantiation of a Service-Oriented Architecture (SOA) within a hard real-time (stringent time constraints), deterministic (maximum predictability) combat system (CS) environment. There are numerous stakeholders across the U.S. Department of the Navy who are affected by this development, and therefore the system…

A deep knowledge architecture for intelligent support of nuclear waste transportation decisions

International Nuclear Information System (INIS)

Batra, D.; Bowen, W.M.; Hill, T.R.; Weeks, K.D.

1988-01-01

The concept of intelligent decision support has been discussed and explored in several recent papers, one of which has suggested the use of a Deep Knowledge Architecture. This paper explores this concept through application to a specific decision environment. The complex problems involved in nuclear waste disposal decisions provide an excellent test case. The resulting architecture uses an integrated, multi-level model base to represent the deep knowledge of the problem. Combined with the surface level knowledge represented by the database, the proposed knowledge base complements that of the decision-maker, allowing analysis at a range of levels of decisions which may also occur at a range of levels

Unified Multi-Layer among Software Defined Multi-Domain Optical Networks (Invited

Directory of Open Access Journals (Sweden)

Hui Yang

2015-06-01

Full Text Available The software defined networking (SDN enabled by OpenFlow protocol has gained popularity which can enable the network to be programmable and accommodate both fixed and flexible bandwidth services. In this paper, we present a unified multi-layer (UML architecture with multiple controllers and a dynamic orchestra plane (DOP for software defined multi-domain optical networks. The proposed architecture can shield the differences among various optical devices from multi-vendors and the details of connecting heterogeneous networks. The cross-domain services with on-demand bandwidth can be deployed via unified interfaces provided by the dynamic orchestra plane. Additionally, the globalization strategy and practical capture of signal processing are presented based on the architecture. The overall feasibility and efficiency of the proposed architecture is experimentally verified on the control plane of our OpenFlow-based testbed. The performance of globalization strategy under heavy traffic load scenario is also quantitatively evaluated based on UML architecture compared with other strategies in terms of blocking probability, average hops, and average resource consumption.

Residential hospice environments: evidence-based architectural and landscape design considerations.

Science.gov (United States)

Verderber, Stephen

2014-01-01

The residential hospice care movement is increasingly accepted and supported globally, and yet, unfortunately, the amount of literature on best practices in the planning and design of residential hospice facilities and adjacent outdoor spaces remains relatively small. This paper reports on a compendium of architectural and landscape design considerations that reflect the fundamental dimensions of the residential hospice experience: site and context, arrival spaces, communal and private spaces of the residential milieu, transitional spaces, and nature connectivity. Additionally, key staffing and administrative ramifications of this built-environment compendium are addressed, as are prognostications and challenges for the future.

Genomic-Enabled Prediction Kernel Models with Random Intercepts for Multi-environment Trials

Science.gov (United States)

Cuevas, Jaime; Granato, Italo; Fritsche-Neto, Roberto; Montesinos-Lopez, Osval A.; Burgueño, Juan; Bandeira e Sousa, Massaine; Crossa, José

2018-01-01

In this study, we compared the prediction accuracy of the main genotypic effect model (MM) without G×E interactions, the multi-environment single variance G×E deviation model (MDs), and the multi-environment environment-specific variance G×E deviation model (MDe) where the random genetic effects of the lines are modeled with the markers (or pedigree). With the objective of further modeling the genetic residual of the lines, we incorporated the random intercepts of the lines (l) and generated another three models. Each of these 6 models were fitted with a linear kernel method (Genomic Best Linear Unbiased Predictor, GB) and a Gaussian Kernel (GK) method. We compared these 12 model-method combinations with another two multi-environment G×E interactions models with unstructured variance-covariances (MUC) using GB and GK kernels (4 model-method). Thus, we compared the genomic-enabled prediction accuracy of a total of 16 model-method combinations on two maize data sets with positive phenotypic correlations among environments, and on two wheat data sets with complex G×E that includes some negative and close to zero phenotypic correlations among environments. The two models (MDs and MDE with the random intercept of the lines and the GK method) were computationally efficient and gave high prediction accuracy in the two maize data sets. Regarding the more complex G×E wheat data sets, the prediction accuracy of the model-method combination with G×E, MDs and MDe, including the random intercepts of the lines with GK method had important savings in computing time as compared with the G×E interaction multi-environment models with unstructured variance-covariances but with lower genomic prediction accuracy. PMID:29476023

Multi-core fiber undersea transmission systems

DEFF Research Database (Denmark)

Nooruzzaman, Md; Morioka, Toshio

2017-01-01

Various potential architectures of branching units for multi-core fiber undersea transmission systems are presented. It is also investigated how different architectures of branching unit influence the number of fibers and those of inline components.......Various potential architectures of branching units for multi-core fiber undersea transmission systems are presented. It is also investigated how different architectures of branching unit influence the number of fibers and those of inline components....

Genetic architecture of carbon isotope composition and growth in Eucalyptus across multiple environments.

Science.gov (United States)

Bartholomé, Jérôme; Mabiala, André; Savelli, Bruno; Bert, Didier; Brendel, Oliver; Plomion, Christophe; Gion, Jean-Marc

2015-06-01

In the context of climate change, the water-use efficiency (WUE) of highly productive tree varieties, such as eucalypts, has become a major issue for breeding programmes. This study set out to dissect the genetic architecture of carbon isotope composition (δ(13) C), a proxy of WUE, across several environments. A family of Eucalyptus urophylla × E. grandis was planted in three trials and phenotyped for δ(13) C and growth traits. High-resolution genetic maps enabled us to target genomic regions underlying δ(13) C quantitative trait loci (QTLs) on the E. grandis genome. Of the 15 QTLs identified for δ(13) C, nine were stable across the environments and three displayed significant QTL-by-environment interaction, suggesting medium to high genetic determinism for this trait. Only one colocalization was found between growth and δ(13) C. Gene ontology (GO) term enrichment analysis suggested candidate genes related to foliar δ(13) C, including two involved in the regulation of stomatal movements. This study provides the first report of the genetic architecture of δ(13) C and its relation to growth in Eucalyptus. The low correlations found between the two traits at phenotypic and genetic levels suggest the possibility of improving the WUE of Eucalyptus varieties without having an impact on breeding for growth. © 2015 CIRAD. New Phytologist © 2015 New Phytologist Trust.

SCADA Architecture for Natural Gas plant

Directory of Open Access Journals (Sweden)

Turc Traian

2009-12-01

Full Text Available The paper describes the Natural Gas Plant SCADA architecture. The main purpose of SCADA system is remote monitoring and controlling of any industrial plant. The SCADA hardware architecture is based on multi-dropping system allowing connecting a large number of different fiels devices. The SCADA Server gathers data from gas plant and stores data to a MtSQL database. The SCADA server is connected to other SCADA client application offers a intuitive and user-friendly HMI. The main benefit of using SCADA is real time displaying of gas plant state. The main contriobution of the authors consists in designing SCADA architecture based on multi-dropping system and Human Machine Interface.

Implementing a real-time chain of segmentation of images on a multi-FPGA architecture

Science.gov (United States)

Akil, Mohamed; Zahirazami, Shahram

1998-03-01

In this paper we present the study and the implementation of an optimized chain of segmentation operators. We implemented this chain in real time, consisting of a Deriche contour detection, double threshold, closing of contours and finally region labeling, on a multi-FPGA architecture. This architecture has four processing FPGAs and four memory modules. Deriche operator, closing of contours and labeling occupy each one an FPGA. Double threshold and detection of the extremities filled partially the forth FPGA. The slowest component of the chain is Deriche operator which can go up to 11.4 Mhz, assuring the process of an image every 40 ms. Deriche operator tries to extract the contours by assuming that a contour is a step super positioned by a white gaussian noise. Our implementation consists of a smoothing part of four second order filters and a Sobel as a derivation part. The second order filters are causal and non-causal horizontal and vertical operators. The gradient image passes through a double threshold filter to select the real contours and the crests and the background pixels. Closing of contours eliminates the false crests and finally the labeling gives a unique label to each closed region. The latency of the chain is in the order of three images. This implementation shows the efficiency of the chain and also it demonstrates the capabilities of our architecture as a prototyping system.

Multi-Softcore Architecture on FPGA

Directory of Open Access Journals (Sweden)

Mouna Baklouti

2014-01-01

Full Text Available To meet the high performance demands of embedded multimedia applications, embedded systems are integrating multiple processing units. However, they are mostly based on custom-logic design methodology. Designing parallel multicore systems using available standards intellectual properties yet maintaining high performance is also a challenging issue. Softcore processors and field programmable gate arrays (FPGAs are a cheap and fast option to develop and test such systems. This paper describes a FPGA-based design methodology to implement a rapid prototype of parametric multicore systems. A study of the viability of making the SoC using the NIOS II soft-processor core from Altera is also presented. The NIOS II features a general-purpose RISC CPU architecture designed to address a wide range of applications. The performance of the implemented architecture is discussed, and also some parallel applications are used for testing speedup and efficiency of the system. Experimental results demonstrate the performance of the proposed multicore system, which achieves better speedup than the GPU (29.5% faster for the FIR filter and 23.6% faster for the matrix-matrix multiplication.

SITUATION ASSESSMENT THROUGH MULTI-MODAL SENSING OF DYNAMIC ENVIRONMENTS TO SUPPORT COGNITIVE ROBOT CONTROL

Directory of Open Access Journals (Sweden)

Atta Badii

2014-12-01

Full Text Available Awareness of emerging situations in a dynamic operational environment of a robotic assistive device is an essential capability of such a cognitive system, based on its effective and efficient assessment of the prevailing situation. This allows the system to interact with the environment in a sensible (semiautonomous / pro-active manner without the need for frequent interventions from a supervisor.  In this paper, we report a novel generic Situation Assessment Architecture for robotic systems directly assisting humans as developed in the CORBYS project. This paper presents the overall architecture for situation assessment and its application in proof-of-concept Demonstrators as developed and validated within the CORBYS project. These include a robotic human follower and a mobile gait rehabilitation robotic system. We present an overview of the structure and functionality of the Situation Assessment Architecture for robotic systems with results and observations as collected from initial validation on the two CORBYS Demonstrators.

The Mystery Tour; Exploring the Designed Environment with Children.

Science.gov (United States)

Balaban, Richard C.; St. Clair, Alison Igo

The Mystery Tour is a multi-sensory approach to the man-made environment. It is designed to acquaint children with historical significance of buildings and architecture and thus prepare them to participate in decisions concerning historical preservation. Developed through a grant from the national Endowment for the Arts, the Mystery Tour guides…

Active materials for adaptive architectural envelopes based on plant adaptation principles

Directory of Open Access Journals (Sweden)

Marlen Lopez

2015-06-01

Full Text Available In this paper, the authors present research into adaptive architectural envelopes that adapt to environmental changes using active materials, as a result of application of biomimetic principles from plants to architecture. Buildings use large amounts of energy in order to maintain their internal comfort, because conventional buildings are designed to provide a static design solution. Most of the current solutions for facades are not designed for optimum adaptation to contextual issues and needs, while biological solutions to adaptation are often complex, multi-functional and highly responsive. We focus on plant adaptations to the environment, as, due to their immobility, they have developed special means of protection against weather changing conditions. Furthermore, recent developments in new technologies are allowing the possibility to transfer these plant adaptation strategies to technical implementation. These technologies include: multi-material 3D printing, advances in materials science and new capabilities in simulation software. Unlike traditional mechanical activation used for dynamic systems in kinetic facades, adaptive architectural envelopes require no complex electronics, sensors, or actuators. The paper proposes a research of the relationship that can be developed between active materials and environmental issues in order to propose innovative and low-tech design strategies to achieve living envelopes according to plant adaptation principles.  

Adaptive Optics Simulation for the World's Largest Telescope on Multicore Architectures with Multiple GPUs

KAUST Repository

Ltaief, Hatem

2016-06-02

We present a high performance comprehensive implementation of a multi-object adaptive optics (MOAO) simulation on multicore architectures with hardware accelerators in the context of computational astronomy. This implementation will be used as an operational testbed for simulating the de- sign of new instruments for the European Extremely Large Telescope project (E-ELT), the world\\'s biggest eye and one of Europe\\'s highest priorities in ground-based astronomy. The simulation corresponds to a multi-step multi-stage pro- cedure, which is fed, near real-time, by system and turbulence data coming from the telescope environment. Based on the PLASMA library powered by the OmpSs dynamic runtime system, our implementation relies on a task-based programming model to permit an asynchronous out-of-order execution. Using modern multicore architectures associated with the enormous computing power of GPUS, the resulting data-driven compute-intensive simulation of the entire MOAO application, composed of the tomographic reconstructor and the observing sequence, is capable of coping with the aforementioned real-time challenge and stands as a reference implementation for the computational astronomy community.

The ABC Adaptive Fusion Architecture

DEFF Research Database (Denmark)

Bunde-Pedersen, Jonathan; Mogensen, Martin; Bardram, Jakob Eyvind

2006-01-01

and early implementation of a systemcapable of adapting to its operating environment, choosingthe best fit combination of the client-server and peerto-peer architectures. The architecture creates a seamlessintegration between a centralized hybrid architecture and adecentralized architecture, relying on what...

Secure Cooperative Data Access in Multi-Cloud Environment

Science.gov (United States)

Le, Meixing

2013-01-01

In this dissertation, we discuss the problem of enabling cooperative query execution in a multi-cloud environment where the data is owned and managed by multiple enterprises. Each enterprise maintains its own relational database using a private cloud. In order to implement desired business services, parties need to share selected portion of their…

Architectural Environment: A Resource Kit.

Science.gov (United States)

J.B. Speed Art Museum, Louisville, KY.

There are many ways to approach the investigation of architecture. One can look at structural form, climate and topography, the aesthetics of style and decoration, building function, historical factors, cultural meanings, or technology and techniques associated with construction. This resource kit touches upon a few of these approaches, ranging…

Multi-tiered S-SOA, Parameter-Driven New Islamic Syariah Products of Holistic Islamic Banking System (HiCORE): Virtual Banking Environment

Science.gov (United States)

Halimah, B. Z.; Azlina, A.; Sembok, T. M.; Sufian, I.; Sharul Azman, M. N.; Azuraliza, A. B.; Zulaiha, A. O.; Nazlia, O.; Salwani, A.; Sanep, A.; Hailani, M. T.; Zaher, M. Z.; Azizah, J.; Nor Faezah, M. Y.; Choo, W. O.; Abdullah, Chew; Sopian, B.

The Holistic Islamic Banking System (HiCORE), a banking system suitable for virtual banking environment, created based on universityindustry collaboration initiative between Universiti Kebangsaan Malaysia (UKM) and Fuziq Software Sdn Bhd. HiCORE was modeled on a multitiered Simple - Services Oriented Architecture (S-SOA), using the parameterbased semantic approach. HiCORE's existence is timely as the financial world is looking for a new approach to creating banking and financial products that are interest free or based on the Islamic Syariah principles and jurisprudence. An interest free banking system has currently caught the interest of bankers and financiers all over the world. HiCORE's Parameter-based module houses the Customer-information file (CIF), Deposit and Financing components. The Parameter based module represents the third tier of the multi-tiered Simple SOA approach. This paper highlights the multi-tiered parameter- driven approach to the creation of new Islamiic products based on the 'dalil' (Quran), 'syarat' (rules) and 'rukun' (procedures) as required by the syariah principles and jurisprudence reflected by the semantic ontology embedded in the parameter module of the system.

Architecture for multi-technology real-time location systems.

Science.gov (United States)

Rodas, Javier; Barral, Valentín; Escudero, Carlos J

2013-02-07

The rising popularity of location-based services has prompted considerable research in the field of indoor location systems. Since there is no single technology to support these systems, it is necessary to consider the fusion of the information coming from heterogeneous sensors. This paper presents a software architecture designed for a hybrid location system where we can merge information from multiple sensor technologies. The architecture was designed to be used by different kinds of actors independently and with mutual transparency: hardware administrators, algorithm developers and user applications. The paper presents the architecture design, work-flow, case study examples and some results to show how different technologies can be exploited to obtain a good estimation of a target position.

Muddy Learning: Evaluating Learning in Multi-User Computer-Based Environments

National Research Council Canada - National Science Library

McArthur, David

1998-01-01

... (Multiple User Synthetic Environments), and MOOs (Multi-User Object Oriented), enables users to create new "rooms" in virtual worlds, define their own personnaes, and engage visitors in rich dialogues...

Multi-scale dynamic modeling of atmospheric pollution in urban environment

International Nuclear Information System (INIS)

Thouron, Laetitia

2017-01-01

Urban air pollution has been identified as an important cause of health impacts, including premature deaths. In particular, ambient concentrations of gaseous pollutants such as nitrogen dioxide (NO 2 ) and particulate matter (PM10 and PM2.5) are regulated, which means that emission reduction strategies must be put in place to reduce these concentrations in places where the corresponding regulations are not respected. Besides, air pollution can contribute to the contamination of other media, for example through the contribution of atmospheric deposition to runoff contamination. The multifactorial and multi-scale aspects of urban make the pollution sources difficult to identify. Indeed, the urban environment is a heterogeneous space characterized by complex architectural structures (old buildings alongside a more modern building, residential, commercial, industrial zones, roads, etc.), non-uniform atmospheric pollutant emissions and therefore the population exposure to pollution is variable in space and time. The modeling of urban air pollution aims to understand the origin of pollutants, their spatial extent and their concentration/deposition levels. Some pollutants have long residence times and can stay several weeks in the atmosphere (PM2.5) and therefore be transported over long distances, while others are more local (NO x in the vicinity of traffic). The spatial distribution of a pollutant will therefore depend on several factors, and in particular on the surfaces encountered. Air quality depends strongly on weather, buildings (canyon-street) and emissions. The aim of this thesis is to address some of these aspects by modeling: (1) urban background pollution with a transport-chemical model (Polyphemus / POLAIR3D), which makes it possible to estimate atmospheric pollutants by type of urban surfaces (roofs, walls and roadways), (2) street-level pollution by explicitly integrating the effects of the building in a three-dimensional way with a multi-scale model of

Architectural Qualities in Passive Houses

DEFF Research Database (Denmark)

Brunsgaard, Camilla

2012-01-01

that it is possible to build this type of houses, but the knowledge and discussion about the architectural quality in the buildings is hardly present. The question is if the strategies for optimising energy use and indoor environment collide with the architectural qualities of buildings. This paper brings forth...... this discussion based in literature and four case studies. The paper highlights cases on how passive strategies for optimising energy use and indoor environment affect, restrict, inspire or create possibilities for the architectural expression and there through the architectural quality of the building....

Cybersecurity and privacy issues for socially integrated mobile healthcare applications operating in a multi-cloud environment.

Science.gov (United States)

Al-Muhtadi, Jalal; Shahzad, Basit; Saleem, Kashif; Jameel, Wasif; Orgun, Mehmet A

2017-05-01

Social media has enabled information-sharing across massively large networks of people without spending much financial resources and time that are otherwise required in the print and electronic media. Mobile-based social media applications have overwhelmingly changed the information-sharing perspective. However, with the advent of such applications at an unprecedented scale, the privacy of the information is compromised to a larger extent if breach mitigation is not adequate. Since healthcare applications are also being developed for mobile devices so that they also benefit from the power of social media, cybersecurity privacy concerns for such sensitive applications have become critical. This article discusses the architecture of a typical mobile healthcare application, in which customized privacy levels are defined for the individuals participating in the system. It then elaborates on how the communication across a social network in a multi-cloud environment can be made more secure and private, especially for healthcare applications.

Intercloud Architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Makkes, M.X.; Strijkers, R.J.; Laat, C. de

2012-01-01

This paper presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses problems in multi-provider multi-domain heterogeneous cloud based infrastructure services and applications integration and interoperability. The paper refers to existing standards in Cloud

Intercloud architecture for interoperability and integration

NARCIS (Netherlands)

Demchenko, Y.; Makkes, M.X.; Strijkers, R.; de Laat, C.

2012-01-01

This paper presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses problems in multi-provider multi-domain heterogeneous cloud based infrastructure services and applications integration and interoperability. The paper refers to existing standards in Cloud

Multi-Media Access and Presentation in the Twente Virtual Theatre Environment

NARCIS (Netherlands)

Correia, N.; Nijholt, Antinus; Cambell, T.; Davenport, G.

2000-01-01

This paper discusses a virtual world for presenting multi-media information and for natural interactions with the environment to get access to this information. Apart from mouse and keyboard input, interactions take place using speech and language. It is shown how this virtual environment can be

Parallel Computational Intelligence-Based Multi-Camera Surveillance System

Directory of Open Access Journals (Sweden)

Sergio Orts-Escolano

2014-04-01

Full Text Available In this work, we present a multi-camera surveillance system based on the use of self-organizing neural networks to represent events on video. The system processes several tasks in parallel using GPUs (graphic processor units. It addresses multiple vision tasks at various levels, such as segmentation, representation or characterization, analysis and monitoring of the movement. These features allow the construction of a robust representation of the environment and interpret the behavior of mobile agents in the scene. It is also necessary to integrate the vision module into a global system that operates in a complex environment by receiving images from multiple acquisition devices at video frequency. Offering relevant information to higher level systems, monitoring and making decisions in real time, it must accomplish a set of requirements, such as: time constraints, high availability, robustness, high processing speed and re-configurability. We have built a system able to represent and analyze the motion in video acquired by a multi-camera network and to process multi-source data in parallel on a multi-GPU architecture.

Architecture for Multi-Technology Real-Time Location Systems

Science.gov (United States)

Rodas, Javier; Barral, Valentín; Escudero, Carlos J.

2013-01-01

The rising popularity of location-based services has prompted considerable research in the field of indoor location systems. Since there is no single technology to support these systems, it is necessary to consider the fusion of the information coming from heterogeneous sensors. This paper presents a software architecture designed for a hybrid location system where we can merge information from multiple sensor technologies. The architecture was designed to be used by different kinds of actors independently and with mutual transparency: hardware administrators, algorithm developers and user applications. The paper presents the architecture design, work-flow, case study examples and some results to show how different technologies can be exploited to obtain a good estimation of a target position. PMID:23435050

Dialogue management in a home machine environment : linguistic components over an agent architecture

OpenAIRE

Quesada Moreno, José Francisco; García, Federico; Sena Pichardo, María Esther; Bernal Bermejo, José Ángel; Amores Carredano, José Gabriel de

2001-01-01

This paper presents the main characteristics of an Agent-based Architecture for the design and implementation of a Spoken Dialogue System. From a theoretical point of view, the system is based on the Information State Update approach, in particular, the system aims at the management of Natural Command Language Dialogue Moves in a Home Machine Environment. Specifically, the paper is focused on the Natural Language Understanding and Dialogue Management Agents...

Energy and environment in an architectural design application

Energy Technology Data Exchange (ETDEWEB)

Schiller, Silvia de; Evans, John Martin [Universidad de Buenos Aires, Facultad de Arquitectura, Diseno y Urbanismo, Buenos Aires (Argentina)

1998-09-01

Office buildings with important administrative functions can produce high energy demands for lighting, cooling and heating. However, appropriate architectural design can achieve significant energy savings and improve environmental conditions, without sacrificing architectural quality. Intense solar radiation and high temperature swings in dry continental climates favour deep plan offices, though natural daylight requires limited depth. This paper presents a case study of a large administrative complex project for the Justice Palace, Neuquen Province, in the cold windy sem-desert climate in the Northern Patagonia Region of Argentina, demonstrating the relevance of specialised advisory services in the architectural field. (Author)

Architectural Engineers

DEFF Research Database (Denmark)

Petersen, Rikke Premer

engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

Architecture Without Explicit Locks for Logic Simulation on SIMD Machines

OpenAIRE

Cockshott, W. Paul; Chimeh, Mozhgan Kabiri

2016-01-01

The presentation describes an architecture for logic simulation that takes advantages of the features of multi-core SIMD architectures. It uses neither explicit locks nor queues, using instead oblivious simulation. Data structures are targeted to efficient SIMD and multi-core cache operation. We demonstrate high levels of parallelisation on Xeon Phi and AMD multi-core machines. Performance on a Xeon Phi is comparable to or better than on a 1000 core Blue Gene machine.

Simulation environment architecture development using the DoDAF

NARCIS (Netherlands)

Berg, T. van den; Lutz, R.

2015-01-01

The US Department of Defense (DoD) Architecture Framework (DoDAF) provides a common approach for architecture description development. The primary use of DoDAF is capability development and system acquisition in the military domain. Although DoDAF was not designed to support the development of

Distributed and decentralized control architectures for converter-interfaced microgrids

DEFF Research Database (Denmark)

Dragicevic, Tomislav; Wu, Dan; Shafiee, Qobad

2017-01-01

This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids. They can be classified into two general categories: 1) power line communication based architectures and 2) multi-agent based architectures. The essential control methods and info......This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids. They can be classified into two general categories: 1) power line communication based architectures and 2) multi-agent based architectures. The essential control methods...... and information sharing algorithms applied in these architectures are reviewed and examined in a hierarchical manner, in order to point out benefits they will bring to future microgrid applications. The paper is concluded with a summary on existing methods and a discussion on future development trends....

Performances of multiprocessor multidisk architectures for continuous media storage

Science.gov (United States)

Gennart, Benoit A.; Messerli, Vincent; Hersch, Roger D.

1996-03-01

Multimedia interfaces increase the need for large image databases, capable of storing and reading streams of data with strict synchronicity and isochronicity requirements. In order to fulfill these requirements, we consider a parallel image server architecture which relies on arrays of intelligent disk nodes, each disk node being composed of one processor and one or more disks. This contribution analyzes through bottleneck performance evaluation and simulation the behavior of two multi-processor multi-disk architectures: a point-to-point architecture and a shared-bus architecture similar to current multiprocessor workstation architectures. We compare the two architectures on the basis of two multimedia algorithms: the compute-bound frame resizing by resampling and the data-bound disk-to-client stream transfer. The results suggest that the shared bus is a potential bottleneck despite its very high hardware throughput (400Mbytes/s) and that an architecture with addressable local memories located closely to their respective processors could partially remove this bottleneck. The point- to-point architecture is scalable and able to sustain high throughputs for simultaneous compute- bound and data-bound operations.

Pecinan as an inspiration The contribution of Chinese Indonesian architecture to an urban environment

Directory of Open Access Journals (Sweden)

Wiwi Tjiook

2017-05-01

Full Text Available Since the abrogation of Presidential Instruction Number 14/1967 which banned Chinese customs celebrations and religion in public, there has been a revival in Chinese festivals, language, art, media, culture and not in the least in the field of architecture and urban planning. With increasing interest in heritage and the support of the Indonesian government for heritage cities programmes, several promising initiatives involving Chinese architecture have been launched in cities both large and small. A brief glance of the history of Chinese Indonesian architecture is given, as well as some recent initiatives in selected cities plus a discussion of the importance of public space in accommodating Chinese festivals. Study of old maps and photographs prompts reflections on the characteristics and development of Pecinan during the colonial era and of their later history. The analysis in this article and examples of recent developments in the cities discussed can be used as an inspiration in the revitalization of Pecinan, thereby contributing in an attractive and livable urban environment.

Multi-provider architecture for cloud outsourcing of medical imaging repositories.

Science.gov (United States)

Godinho, Tiago Marques; Bastião Silva, Luís A; Costa, Carlos; Oliveira, José Luís

2014-01-01

Over the last few years, the extended usage of medical imaging procedures has raised the medical community attention towards the optimization of their workflows. More recently, the federation of multiple institutions into a seamless distribution network has brought hope of increased quality healthcare services along with more efficient resource management. As a result, medical institutions are constantly looking for the best infrastructure to deploy their imaging archives. In this scenario, public cloud infrastructures arise as major candidates, as they offer elastic storage space, optimal data availability without great requirements of maintenance costs or IT personnel, in a pay-as-you-go model. However, standard methodologies still do not take full advantage of outsourced archives, namely because their integration with other in-house solutions is troublesome. This document proposes a multi-provider architecture for integration of outsourced archives with in-house PACS resources, taking advantage of foreign providers to store medical imaging studies, without disregarding security. It enables the retrieval of images from multiple archives simultaneously, improving performance, data availability and avoiding the vendor-locking problem. Moreover it enables load balancing and cache techniques.

Intercloud Architecture Framework for Interoperability and Integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.J.

2013-01-01

This report presents on-going research to develop the Intercloud Architecture Framework (ICAF) that addresses interoperability and integration issues in multi-provider multi-domain heterogeneous Cloud based infrastructure services and applications provisioning, including integration and

Innovative HPC architectures for the study of planetary plasma environments

Science.gov (United States)

Amaya, Jorge; Wolf, Anna; Lembège, Bertrand; Zitz, Anke; Alvarez, Damian; Lapenta, Giovanni

2016-04-01

DEEP-ER is an European Commission founded project that develops a new type of High Performance Computer architecture. The revolutionary system is currently used by KU Leuven to study the effects of the solar wind on the global environments of the Earth and Mercury. The new architecture combines the versatility of Intel Xeon computing nodes with the power of the upcoming Intel Xeon Phi accelerators. Contrary to classical heterogeneous HPC architectures, where it is customary to find CPU and accelerators in the same computing nodes, in the DEEP-ER system CPU nodes are grouped together (Cluster) and independently from the accelerator nodes (Booster). The system is equipped with a state of the art interconnection network, a highly scalable and fast I/O and a fail recovery resiliency system. The final objective of the project is to introduce a scalable system that can be used to create the next generation of exascale supercomputers. The code iPic3D from KU Leuven is being adapted to this new architecture. This particle-in-cell code can now perform the computation of the electromagnetic fields in the Cluster while the particles are moved in the Booster side. Using fast and scalable Xeon Phi accelerators in the Booster we can introduce many more particles per cell in the simulation than what is possible in the current generation of HPC systems, allowing to calculate fully kinetic plasmas with very low interpolation noise. The system will be used to perform fully kinetic, low noise, 3D simulations of the interaction of the solar wind with the magnetosphere of the Earth and Mercury. Preliminary simulations have been performed in other HPC centers in order to compare the results in different systems. In this presentation we show the complexity of the plasma flow around the planets, including the development of hydrodynamic instabilities at the flanks, the presence of the collision-less shock, the magnetosheath, the magnetopause, reconnection zones, the formation of the

Architecture of absurd (forms, positions, apposition

Directory of Open Access Journals (Sweden)

Fedorov Viktor Vladimirovich

2014-04-01

Full Text Available In everyday life we constantly face absurd things, which seem to lack common sense. The notion of the absurd acts as: a an aesthetic category; b an element of logic; c a metaphysical phenomenon. The opportunity of its overcoming is achieved through the understanding of the situation, the faith in the existence of sense and hope for his understanding. The architecture of absurd should be considered as a loss of sense of a part of architectural landscape (urban environment. The ways of organization of the architecture of absurd: the exaggerated forms and proportions, the unnatural position and apposition of various objects. These are usually small-scale facilities that have local spatial and temporary value. There are no large absurd architectural spaces, as the natural architectural environment dampens the perturbation of sense-sphere. The architecture of absurd is considered «pathology» of the environment. «Nonsense» objects and hope (or even faith to detect sense generate a fruitful paradox of architecture of absurd presence in the world.

Wireless receiver architectures and design antennas, RF, synthesizers, mixed signal, and digital signal processing

CERN Document Server

Rouphael, Tony J

2014-01-01

Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver's analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, s

Using business critical design rules to frame new architecture introduction in multi-architecture portfolios

DEFF Research Database (Denmark)

Løkkegaard, Martin; Mortensen, Niels Henrik; Hvam, Lars

2018-01-01

component sharing, or sharing critical design principles. This alignment is not trivial, as extensive design knowledge is needed to overview a portfolio with many, often highly different products and manufacturing lines. In this paper, we suggest establishing a frame of reference for new......When introducing new architectures to an industrial portfolio, counting multiple existing product and manufacturing solutions, time-to-market and investments in manufacturing equipment can be significantly reduced if new concepts are aligned with the existing portfolio. This can be done through......-product introduction based on several ‘game rules’, or Business Critical Design Rules (BCDRs), which denote the most critical features of the product and manufacturing architectures, and should be considered an obligatory reference for design when introducing new architectures. BCDRs are derived from the portfolio...

Study of Selected Components of Architectural Environment of Primary Schools - Preferences of Adults and Analysis of the Specialist Literature

Science.gov (United States)

Halarewicz, Aleksandra

2017-10-01

The school is one of the oldest social institutions designed to prepare a young man for an adult life. It performs a teaching and educational function in child’s life. It is a place where, apart from home, the child spends most of the time in a day, therefore it is one of the most important institutions in the life of a young person. The school environment has a direct impact on the student's personality and ambition, and it shapes an attitude of the young person. Therefore, the design process preceding the establishment of school facilities is extremely responsible and should be conducted in a conscious and thoughtful way. This article is a summary and an attempt to synthesize the data obtained from the survey carried out by the author in the context of the design guidelines contained in the specialist literature. The questionnaire survey was designed to make an attempt to determine adult’s preferences, opinions and perceptions about selected components of the primary school environment, including the factors which determine the choice of school for children, the priorities of architecture components made for early childhood use, also to specify the type and the scale of existing drawbacks and problems in the school construction industry, as well as expectations about the contemporary architecture of primary schools and its future changes. Moreover, in the article, based on the analysis of the available specialist’s literature, the following are broadly discussed: the general division and characterization of school spaces, issues related to the influence of selected components of the architectural environment on the physical, mental and psychological safety of children. Furthermore, the author raises the subject of the influence of the architectural interiors and furniture on the mood, emotions or comfort of children in the early school age, based on the anthropometric characteristics of children and issues related to the perception of space with an extra

Complex Genotype by Environment interactions and changing genetic architectures across thermal environments in the Australian field cricket, Teleogryllus oceanicus

Directory of Open Access Journals (Sweden)

Dowling Damian K

2011-07-01

Full Text Available Abstract Background Biologists studying adaptation under sexual selection have spent considerable effort assessing the relative importance of two groups of models, which hinge on the idea that females gain indirect benefits via mate discrimination. These are the good genes and genetic compatibility models. Quantitative genetic studies have advanced our understanding of these models by enabling assessment of whether the genetic architectures underlying focal phenotypes are congruent with either model. In this context, good genes models require underlying additive genetic variance, while compatibility models require non-additive variance. Currently, we know very little about how the expression of genotypes comprised of distinct parental haplotypes, or how levels and types of genetic variance underlying key phenotypes, change across environments. Such knowledge is important, however, because genotype-environment interactions can have major implications on the potential for evolutionary responses to selection. Results We used a full diallel breeding design to screen for complex genotype-environment interactions, and genetic architectures underlying key morphological traits, across two thermal environments (the lab standard 27°C, and the cooler 23°C in the Australian field cricket, Teleogryllus oceanicus. In males, complex three-way interactions between sire and dam parental haplotypes and the rearing environment accounted for up to 23 per cent of the scaled phenotypic variance in the traits we measured (body mass, pronotum width and testes mass, and each trait harboured significant additive genetic variance in the standard temperature (27°C only. In females, these three-way interactions were less important, with interactions between the paternal haplotype and rearing environment accounting for about ten per cent of the phenotypic variance (in body mass, pronotum width and ovary mass. Of the female traits measured, only ovary mass for crickets

Consistency in multi-viewpoint architectural design

NARCIS (Netherlands)

Dijkman, R.M.; Dijkman, Remco Matthijs

2006-01-01

This thesis presents a framework that aids in preserving consistency in multi-viewpoint designs. In a multi-viewpoint design each stakeholder constructs his own design part. We call each stakeholder’s design part the view of that stakeholder. To construct his view, a stakeholder has a viewpoint.

Collaborative-Hybrid Multi-Layer Network Control for Emerging Cyber-Infrastructures

Energy Technology Data Exchange (ETDEWEB)

Lehman, Tom [USC; Ghani, Nasir [UNM; Boyd, Eric [UCAID

2010-08-31

At a high level, there were four basic task areas identified for the Hybrid-MLN project. They are: o Multi-Layer, Multi-Domain, Control Plane Architecture and Implementation, including OSCARS layer2 and InterDomain Adaptation, Integration of LambdaStation and Terapaths with Layer2 dynamic provisioning, Control plane software release, Scheduling, AAA, security architecture, Network Virtualization architecture, Multi-Layer Network Architecture Framework Definition; o Heterogeneous DataPlane Testing; o Simulation; o Project Publications, Reports, and Presentations.

Architecture of the Multi-Modal Organizational Research and Production Heterogeneous Network (MORPHnet)

Energy Technology Data Exchange (ETDEWEB)

Aiken, R.J.; Carlson, R.A.; Foster, I.T. [and others

1997-01-01

The research and education (R&E) community requires persistent and scaleable network infrastructure to concurrently support production and research applications as well as network research. In the past, the R&E community has relied on supporting parallel network and end-node infrastructures, which can be very expensive and inefficient for network service managers and application programmers. The grand challenge in networking is to provide support for multiple, concurrent, multi-layer views of the network for the applications and the network researchers, and to satisfy the sometimes conflicting requirements of both while ensuring one type of traffic does not adversely affect the other. Internet and telecommunications service providers will also benefit from a multi-modal infrastructure, which can provide smoother transitions to new technologies and allow for testing of these technologies with real user traffic while they are still in the pre-production mode. The authors proposed approach requires the use of as much of the same network and end system infrastructure as possible to reduce the costs needed to support both classes of activities (i.e., production and research). Breaking the infrastructure into segments and objects (e.g., routers, switches, multiplexors, circuits, paths, etc.) gives the capability to dynamically construct and configure the virtual active networks to address these requirements. These capabilities must be supported at the campus, regional, and wide-area network levels to allow for collaboration by geographically dispersed groups. The Multi-Modal Organizational Research and Production Heterogeneous Network (MORPHnet) described in this report is an initial architecture and framework designed to identify and support the capabilities needed for the proposed combined infrastructure and to address related research issues.

Introduction of an agent-based multi-scale modular architecture for dynamic knowledge representation of acute inflammation.

Science.gov (United States)

An, Gary

2008-05-27

One of the greatest challenges facing biomedical research is the integration and sharing of vast amounts of information, not only for individual researchers, but also for the community at large. Agent Based Modeling (ABM) can provide a means of addressing this challenge via a unifying translational architecture for dynamic knowledge representation. This paper presents a series of linked ABMs representing multiple levels of biological organization. They are intended to translate the knowledge derived from in vitro models of acute inflammation to clinically relevant phenomenon such as multiple organ failure. ABM development followed a sequence starting with relatively direct translation from in-vitro derived rules into a cell-as-agent level ABM, leading on to concatenated ABMs into multi-tissue models, eventually resulting in topologically linked aggregate multi-tissue ABMs modeling organ-organ crosstalk. As an underlying design principle organs were considered to be functionally composed of an epithelial surface, which determined organ integrity, and an endothelial/blood interface, representing the reaction surface for the initiation and propagation of inflammation. The development of the epithelial ABM derived from an in-vitro model of gut epithelial permeability is described. Next, the epithelial ABM was concatenated with the endothelial/inflammatory cell ABM to produce an organ model of the gut. This model was validated against in-vivo models of the inflammatory response of the gut to ischemia. Finally, the gut ABM was linked to a similarly constructed pulmonary ABM to simulate the gut-pulmonary axis in the pathogenesis of multiple organ failure. The behavior of this model was validated against in-vivo and clinical observations on the cross-talk between these two organ systems. A series of ABMs are presented extending from the level of intracellular mechanism to clinically observed behavior in the intensive care setting. The ABMs all utilize cell-level agents

Introducing ORACLE: Library Processing in a Multi-User Environment.

Science.gov (United States)

Queensland Library Board, Brisbane (Australia).

Currently being developed by the State Library of Queensland, Australia, ORACLE (On-Line Retrieval of Acquisitions, Cataloguing, and Circulation Details for Library Enquiries) is a computerized library system designed to provide rapid processing of library materials in a multi-user environment. It is based on the Australian MARC format and fully…

Reframing information architecture

CERN Document Server

Resmini, Andrea

2014-01-01

Information architecture has changed dramatically since the mid-1990s and earlier conceptions of the world and the internet being different and separate have given way to a much more complex scenario in the present day. In the post-digital world that we now inhabit the digital and the physical blend easily and our activities and usage of information takes place through multiple contexts and via multiple devices and unstable, emergent choreographies. Information architecture now is steadily growing into a channel- or medium-specific multi-disciplinary framework, with contributions coming from a

A Multi Agent Based Approach for Prehospital Emergency Management.

Science.gov (United States)

Safdari, Reza; Shoshtarian Malak, Jaleh; Mohammadzadeh, Niloofar; Danesh Shahraki, Azimeh

2017-07-01

To demonstrate an architecture to automate the prehospital emergency process to categorize the specialized care according to the situation at the right time for reducing the patient mortality and morbidity. Prehospital emergency process were analyzed using existing prehospital management systems, frameworks and the extracted process were modeled using sequence diagram in Rational Rose software. System main agents were identified and modeled via component diagram, considering the main system actors and by logically dividing business functionalities, finally the conceptual architecture for prehospital emergency management was proposed. The proposed architecture was simulated using Anylogic simulation software. Anylogic Agent Model, State Chart and Process Model were used to model the system. Multi agent systems (MAS) had a great success in distributed, complex and dynamic problem solving environments, and utilizing autonomous agents provides intelligent decision making capabilities.  The proposed architecture presents prehospital management operations. The main identified agents are: EMS Center, Ambulance, Traffic Station, Healthcare Provider, Patient, Consultation Center, National Medical Record System and quality of service monitoring agent. In a critical condition like prehospital emergency we are coping with sophisticated processes like ambulance navigation health care provider and service assignment, consultation, recalling patients past medical history through a centralized EHR system and monitoring healthcare quality in a real-time manner. The main advantage of our work has been the multi agent system utilization. Our Future work will include proposed architecture implementation and evaluation of its impact on patient quality care improvement.

Study of a PEFC power generator modular architecture based on a multi-stack association

Energy Technology Data Exchange (ETDEWEB)

Garnier, James; Pera, Marie-Cecile; Hissel, Daniel; Kauffmann, Jean-Marie [Laboratoire d' Electronique, Electrotechnique et Systemes, Unite Mixte de Recherche UTBM et UFC, L2ES-UTBM Batiment F-Technopole, Rue Thierry Mieg, 90010 Belfort (France); De Bernardinis, Alexandre; Candusso, Denis; Coquery, Gerard [Institut National de Recherche Sur Les Transports et Leur Securite (INRETS LTN), 2 Avenue Du General Malleret-Joinville, 94114 Arcueil (France)

2006-05-19

This paper presents a study of a polymer electrolyte fuel cell (PEFC) power generator based on a multi-stack association dedicated to transportation applications. First, a dynamic model of the fuel cell for high frequencies, which can be used in association with the power converter is presented. In a second hand, an original power converter architecture has been studied which authorizes the electrical association of two fuel cell stacks. Such a configuration is well adapted for the testing of fuel cell in normal or degraded mode which corresponds to real operating conditions encountered on-board a vehicle. Finally, simulation results of the complete twin-stacks power system are presented and discussed. (author)

Service Modularity and Architecture

DEFF Research Database (Denmark)

Brax, Saara A.; Bask, Anu; Hsuan, Juliana

2017-01-01

, platform-based and mass-customized service business models, comparative research designs, customer perspectives and service experience, performance in context of modular services, empirical evidence of benefits and challenges, architectural innovation in services, modularization in multi-provider contexts......Purpose: Services are highly important in a world economy which has increasingly become service driven. There is a growing need to better understand the possibilities for, and requirements of, designing modular service architectures. The purpose of this paper is to elaborate on the roots...... of the emerging research stream on service modularity, provide a concise overview of existing work on the subject, and outline an agenda for future research on service modularity and architecture. The articles in the special issue offer four diverse sets of research on service modularity and architecture. Design...

Improving the Psychosocial Work Environment at Multi-Ethnic Workplaces: A Multi-Component Intervention Strategy in the Cleaning Industry

Directory of Open Access Journals (Sweden)

Mari-Ann Flyvholm

2013-10-01

Full Text Available Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workplace in the cleaning sector. The intervention included Danish lessons, vocational training courses, and activities to improve collaboration across different groups of cleaners. Interviews about the outcome of the intervention were conducted with the cleaners and their supervisor. The Copenhagen Psychosocial Questionnaire was used as a supplement to the interviews. The results suggest that the psychosocial work environment had improved after the intervention. According to the interviews with the cleaners, the intervention had led to improved communication, trust, and collaboration. These findings are supported by the questionnaire where social support from supervisor and colleagues, social community, trust, and teamwork seem to have improved together with meaning of work, rewards, and emotional demands. The design of the intervention may provide inspiration for future psychosocial work environment interventions at multi-ethnic work places.

Improving the psychosocial work environment at multi-ethnic workplaces: a multi-component intervention strategy in the cleaning industry.

Science.gov (United States)

Smith, Louise Hardman; Hviid, Kirsten; Frydendall, Karen Bo; Flyvholm, Mari-Ann

2013-10-14

Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workplace in the cleaning sector. The intervention included Danish lessons, vocational training courses, and activities to improve collaboration across different groups of cleaners. Interviews about the outcome of the intervention were conducted with the cleaners and their supervisor. The Copenhagen Psychosocial Questionnaire was used as a supplement to the interviews. The results suggest that the psychosocial work environment had improved after the intervention. According to the interviews with the cleaners, the intervention had led to improved communication, trust, and collaboration. These findings are supported by the questionnaire where social support from supervisor and colleagues, social community, trust, and teamwork seem to have improved together with meaning of work, rewards, and emotional demands. The design of the intervention may provide inspiration for future psychosocial work environment interventions at multi-ethnic work places.

A concept of distributed architecture for maintenance robot systems

International Nuclear Information System (INIS)

Asama, Hajime

1990-01-01

Aiming at development of a robot system for maintenance tasks in nuclear power plants, a concept of distributed architecture for autonomous robot systems is discussed. At first, based on investigation of maintenance tasks, requirements for maintenance robots are introduced, and structures to realize multi-functions are discussed. Then, as a new design strategy of maintenance robot system, an autonomous and decentralized robot systems is proposed, which is composed of multiple robots, computers, and equipments, and concept of ACTRESS (ACTor-based Robots and Equipments Synthetic System) including communication framework between robotic components is designed. Finally, as a model of ACTRESS, a experimental system is developed, which deals with object-pushing tasks by two micromice and an environment modeler with communicating with each other. Both of parallel independent motion and cooperative motion based on communication is reconciled, and the efficiency of the distributed architecture is verified. (author)

Rational versus Emotional Reasoning in a Realistic Multi-Objective Environment

OpenAIRE

Mayboudi, Seyed Mohammad Hossein

2011-01-01

ABSTRACT: Emotional intelligence and its associated with models have recently become one of new active studies in the field of artificial intelligence. Several works have been performed on modelling of emotional behaviours such as love, hate, happiness and sadness. This study presents a comparative evaluation of rational and emotional behaviours and the effects of emotions on the decision making process of agents in a realistic multi-objective environment. NetLogo simulation environment is u...

Unibot, a Universal Agent Architecture for Robots

Directory of Open Access Journals (Sweden)

Saša Mladenović

2017-01-01

Full Text Available Today there are numerous robots in different applications domains despite the fact that they still have limitations in perception, actuation and decision process. Consequently, robots usually have limited autonomy, they are domain specific or have difficulty to adapt on new environments. Learning is the property that makes an agent intelligent and the crucial property that a robot should have to proliferate into the human society. Embedding the learning ability into the robot may simplify the development of the robot control mechanism. The motivation for this research is to develop the agent architecture of the universal robot – Unibot. In our approach the agent is the robot i.e. Unibot that acts in the physical world and is capable of learning. The Unibot conducts several simultaneous simulations of a problem of interest like path-finding. The novelty in our approach is the Multi-Agent Decision Support System which is developed and integrated into the Unibot agent architecture in order to execute simultaneous simulations. Furthermore, the Unibot calculates and evaluates between multiple solutions, decides which action should be performed and performs the action. The prototype of the Unibot agent architecture is described and evaluated in the experiment supported by the Lego Mindstorms robot and the NetLogo.

ImTK: an open source multi-center information management toolkit

Science.gov (United States)

Alaoui, Adil; Ingeholm, Mary Lou; Padh, Shilpa; Dorobantu, Mihai; Desai, Mihir; Cleary, Kevin; Mun, Seong K.

2008-03-01

The Information Management Toolkit (ImTK) Consortium is an open source initiative to develop robust, freely available tools related to the information management needs of basic, clinical, and translational research. An open source framework and agile programming methodology can enable distributed software development while an open architecture will encourage interoperability across different environments. The ISIS Center has conceptualized a prototype data sharing network that simulates a multi-center environment based on a federated data access model. This model includes the development of software tools to enable efficient exchange, sharing, management, and analysis of multimedia medical information such as clinical information, images, and bioinformatics data from multiple data sources. The envisioned ImTK data environment will include an open architecture and data model implementation that complies with existing standards such as Digital Imaging and Communications (DICOM), Health Level 7 (HL7), and the technical framework and workflow defined by the Integrating the Healthcare Enterprise (IHE) Information Technology Infrastructure initiative, mainly the Cross Enterprise Document Sharing (XDS) specifications.

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Technical Performance Measures of the Block 2 Architecture

Science.gov (United States)

Grant, K. D.; Panas, M.

2016-12-01

NOAA and NASA are jointly acquiring the next-generation civilian weather satellite system: the Joint Polar Satellite System (JPSS). JPSS replaced the afternoon orbit component and ground processing of NOAA's old POES system. JPSS satellites carry sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a globally distributed, multi-mission system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture has been upgraded to Block 2.0 to satisfy several key objectives, including: "operationalizing" the first satellite, Suomi NPP, which originally was a risk reduction mission; leveraging lessons learned in multi-mission support, taking advantage of newer, more reliable and efficient technologies and satisfying constraints due of the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 48 Technical Performance Measures (TPMs) across 9 categories: Data Availability, Data Latency, Operational Availability, Margin, Scalability, Situational Awareness, Transition (between environments and sites), WAN Efficiency, and Data Recovery Processing. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 9 TPM categories listed above. We will describe how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

Paleomagnetism.org : An online multi-platform open source environment for paleomagnetic data analysis

NARCIS (Netherlands)

Koymans, Mathijs R.; Langereis, C.G.; Pastor-Galán, D.; van Hinsbergen, D.J.J.

2016-01-01

This contribution provides an overview of Paleomagnetism.org, an open-source, multi-platform online environment for paleomagnetic data analysis. Paleomagnetism.org provides an interactive environment where paleomagnetic data can be interpreted, evaluated, visualized, and exported. The

Architectures Toward Reusable Science Data Systems

Science.gov (United States)

Moses, John

2015-01-01

Science Data Systems (SDS) comprise an important class of data processing systems that support product generation from remote sensors and in-situ observations. These systems enable research into new science data products, replication of experiments and verification of results. NASA has been building systems for satellite data processing since the first Earth observing satellites launched and is continuing development of systems to support NASA science research and NOAAs Earth observing satellite operations. The basic data processing workflows and scenarios continue to be valid for remote sensor observations research as well as for the complex multi-instrument operational satellite data systems being built today. System functions such as ingest, product generation and distribution need to be configured and performed in a consistent and repeatable way with an emphasis on scalability. This paper will examine the key architectural elements of several NASA satellite data processing systems currently in operation and under development that make them suitable for scaling and reuse. Examples of architectural elements that have become attractive include virtual machine environments, standard data product formats, metadata content and file naming, workflow and job management frameworks, data acquisition, search, and distribution protocols. By highlighting key elements and implementation experience we expect to find architectures that will outlast their original application and be readily adaptable for new applications. Concepts and principles are explored that lead to sound guidance for SDS developers and strategists.

Thermal Space in Architecture

DEFF Research Database (Denmark)

Petersen, Mads Dines

Present research is revolving around the design process and the use of digital applications to support the design process among architects. This work is made in relation to the current discussions about sustainable architecture and the increased focus on energy consumption and the comfort in our...... and understanding of spaces in buildings can change significantly and instead of the creation of frozen geometrical spaces, thermal spaces can be created as it is suggested in meteorological architecture where functions are distributed in relation to temperature gradients. This creates an interesting contrast......-introducing an increased adaptability in the architecture can be a part of re-defining the environmental agenda and re-establish a link between the environment of the site and the environment of the architecture and through that an increased appreciation of the sensuous space here framed in discussions about thermal...

An Embedded Multi-Agent Systems Based Industrial Wireless Sensor Network.

Science.gov (United States)

Taboun, Mohammed S; Brennan, Robert W

2017-09-14

With the emergence of cyber-physical systems, there has been a growing interest in network-connected devices. One of the key requirements of a cyber-physical device is the ability to sense its environment. Wireless sensor networks are a widely-accepted solution for this requirement. In this study, an embedded multi-agent systems-managed wireless sensor network is presented. A novel architecture is proposed, along with a novel wireless sensor network architecture. Active and passive wireless sensor node types are defined, along with their communication protocols, and two application-specific examples are presented. A series of three experiments is conducted to evaluate the performance of the agent-embedded wireless sensor network.

A 2-layer and P2P-based architecture on resource location in future grid environment

International Nuclear Information System (INIS)

Pei Erming; Sun Gongxin; Zhang Weiyi; Pang Yangguang; Gu Ming; Ma Nan

2004-01-01

Grid and Peer-to-Peer computing are two distributed resource sharing environments developing rapidly in recent years. The final objective of Grid, as well as that of P2P technology, is to pool large sets of resources effectively to be used in a more convenient, fast and transparent way. We can speculate that, though many difference exists, Grid and P2P environments will converge into a large scale resource sharing environment that combines the characteristics of the two environments: large diversity, high heterogeneity (of resources), dynamism, and lack of central control. Resource discovery in this future Grid environment is a basic however, important problem. In this article. We propose a two-layer and P2P-based architecture for resource discovery and design a detailed algorithm for resource request propagation in the computing environment discussed above. (authors)

Multi-person tracking with overlapping cameras in complex, dynamic environments

NARCIS (Netherlands)

Liem, M.; Gavrila, D.M.

2009-01-01

This paper presents a multi-camera system to track multiple persons in complex, dynamic environments. Position measurements are obtained by carving out the space defined by foreground regions in the overlapping camera views and projecting these onto blobs on the ground plane. Person appearance is

Agent Architectures for Compliance

Science.gov (United States)

Burgemeestre, Brigitte; Hulstijn, Joris; Tan, Yao-Hua

A Normative Multi-Agent System consists of autonomous agents who must comply with social norms. Different kinds of norms make different assumptions about the cognitive architecture of the agents. For example, a principle-based norm assumes that agents can reflect upon the consequences of their actions; a rule-based formulation only assumes that agents can avoid violations. In this paper we present several cognitive agent architectures for self-monitoring and compliance. We show how different assumptions about the cognitive architecture lead to different information needs when assessing compliance. The approach is validated with a case study of horizontal monitoring, an approach to corporate tax auditing recently introduced by the Dutch Customs and Tax Authority.

Iraqi architecture in mogul period

Directory of Open Access Journals (Sweden)

Hasan Shatha

2018-01-01

Full Text Available Iraqi architecture have many periods passed through it until now, each on from these periods have it is architectural style, also through time these styles interacted among us, to creating kind of space forming, space relationships, and architectural elements (detailed treatments, the research problem being from the multi interacted architectural styles causing some of confused of general characteristic to every style, that we could distinguish by it. Research tries to study architecture style through Mogul Conquest to Baghdad. Aim of research follow main characteristic for this architectural style in the Mogul periods on the level of form, elements, and treatments. Research depending on descriptive and analytical all buildings belong to this period, so from analyzing there style by, general form for building, architectural elements, and it architectural treatment, therefore; repeating this procedures to every building we get some similarities, from these similarities we can making conclusion about pure characteristic of the style of these period. Other side, we also discover some Dissimilar in the building periods, these will lead research to make what interacting among styles in this period, after all that we can drew clearly main characteristic of Architectural Style for Mogul Conquest in Baghdad

Defining Inter-Cloud Architecture for Interoperability and Integration

NARCIS (Netherlands)

Demchenko, Y.; Ngo, C.; Makkes, M.X.; Strijkers, R.J.; Laat, C. de

2012-01-01

This paper presents on-going research to develop the Inter-Cloud Architecture that should address problems in multi-provider multi-domain heterogeneous Cloud based applications integration and interoperability, including integration and interoperability with legacy infrastructure services. Cloud

Optimizing Libraries’ Content Findability Using Simple Object Access Protocol (SOAP) With Multi-Tier Architecture

Science.gov (United States)

Lahinta, A.; Haris, I.; Abdillah, T.

2017-03-01

The aim of this paper is to describe a developed application of Simple Object Access Protocol (SOAP) as a model for improving libraries’ digital content findability on the library web. The study applies XML text-based protocol tools in the collection of data about libraries’ visibility performance in the search results of the book. Model from the integrated Web Service Document Language (WSDL) and Universal Description, Discovery and Integration (UDDI) are applied to analyse SOAP as element within the system. The results showed that the developed application of SOAP with multi-tier architecture can help people simply access the website in the library server Gorontalo Province and support access to digital collections, subscription databases, and library catalogs in each library in Regency or City in Gorontalo Province.

Brain Emotional Learning Based Intelligent Decoupler for Nonlinear Multi-Input Multi-Output Distillation Columns

Directory of Open Access Journals (Sweden)

M. H. El-Saify

2017-01-01

Full Text Available The distillation process is vital in many fields of chemical industries, such as the two-coupled distillation columns that are usually highly nonlinear Multi-Input Multi-Output (MIMO coupled processes. The control of MIMO process is usually implemented via a decentralized approach using a set of Single-Input Single-Output (SISO loop controllers. Decoupling the MIMO process into group of single loops requires proper input-output pairing and development of decoupling compensator unit. This paper proposes a novel intelligent decoupling approach for MIMO processes based on new MIMO brain emotional learning architecture. A MIMO architecture of Brain Emotional Learning Based Intelligent Controller (BELBIC is developed and applied as a decoupler for 4 input/4 output highly nonlinear coupled distillation columns process. Moreover, the performance of the proposed Brain Emotional Learning Based Intelligent Decoupler (BELBID is enhanced using Particle Swarm Optimization (PSO technique. The performance is compared with the PSO optimized steady state decoupling compensation matrix. Mathematical models of the distillation columns and the decouplers are built and tested in simulation environment by applying the same inputs. The results prove remarkable success of the BELBID in minimizing the loops interactions without degrading the output that every input has been paired with.

Teaching Creative Thinking through Architectural Design

Science.gov (United States)

Jeon, Kijeong; Cotner, Teresa L.

2010-01-01

Art and art education are open to broader definitions in the twenty-first century. It is time that teachers seriously think about including built environment design in K-12 art education. The term "built environment" includes interior design, architecture, landscape architecture, and urban planning. Due to increased exposure to built environment…

Report of the 2014 Programming Models and Environments Summit

Energy Technology Data Exchange (ETDEWEB)

Heroux, Michael [US Dept. of Energy, Washington, DC (United States); Lethin, Richard [US Dept. of Energy, Washington, DC (United States)

2016-09-19

Programming models and environments play the essential roles in high performance computing of enabling the conception, design, implementation and execution of science and engineering application codes. Programmer productivity is strongly influenced by the effectiveness of our programming models and environments, as is software sustainability since our codes have lifespans measured in decades, so the advent of new computing architectures, increased concurrency, concerns for resilience, and the increasing demands for high-fidelity, multi-physics, multi-scale and data-intensive computations mean that we have new challenges to address as part of our fundamental R&D requirements. Fortunately, we also have new tools and environments that make design, prototyping and delivery of new programming models easier than ever. The combination of new and challenging requirements and new, powerful toolsets enables significant synergies for the next generation of programming models and environments R&D. This report presents the topics discussed and results from the 2014 DOE Office of Science Advanced Scientific Computing Research (ASCR) Programming Models & Environments Summit, and subsequent discussions among the summit participants and contributors to topics in this report.

The Design Space of Multi-Language Development Environments

DEFF Research Database (Denmark)

Pfeiffer, Rolf-Helge; Wasowski, Andrzej

2014-01-01

Non-trivial software systems integrate many artifacts expressed in multiple modeling and program- ming languages. However, even though these artifacts heavily depend on each other, existing development envi- ronments do not sufficiently support handling relations between artifacts in different...... languages. By means of a literature survey, tool prototyping and experiments we study the design space of multi-language development environments (MLDEs)—tools that consider the cross-language relations as first artifacts. We ask: what is the state of the art in the MLDE space? What are the design choices...... and challenges faced by tool builders? To what extent MLDEs are desired by users, and for what support features? Our main conclusions are that (a) cross-language re- lations are ubiquitous and troublesome in multi-language systems, (b) users highly appreciated cross-language sup- port mechanisms of MLDEs and (c...

Organization of Multi-controller Interaction in Software Defined Networks

Directory of Open Access Journals (Sweden)

Sergey V. Morzhov

2018-01-01

Full Text Available Software Defined Networking (SDN is a promising paradigm for network management. It is a centralized network intelligence on a dedicated server, which runs network operating system, and is called SDN controller. It was assumed that such an architecture should have an improved network performance and monitoring. However, the centralized control architecture of the SDNs brings novel challenges to reliability, scalability, fault tolerance and interoperability. These problems are especially acute for large data center networks and can be solved by combining SDN controllers into clusters, called multi-controllers. Multi-controller architecture became very important for SDN-enabled networks nowadays. This paper gives a comprehensive overview of SDN multi-controller architectures. The authors review several most popular distributed controllers in order to indicate their strengths and weaknesses. They also investigate and classify approaches used. This paper explains in details the difference among various types of multi-controller architectures, the distribution method and the communication system. Furthermore, it provides already implemented architectures and some examples of architectures under consideration by describing their design, communication process, and performance results. In this paper, the authors show their own classification of multi-controllers and claim that, despite the existence of undeniable advantages, all reviewed controllers have serious drawbacks, which must be eliminated. These drawbacks hamper the development of multi-controllers and their widespread adoption in corporate networks. In the end, the authors conclude that now it is impossible to find a solution capable to solve all the tasks assigned to it adequately and fully. The article is published in the authors’ wording.

Performative Urban Architecture

DEFF Research Database (Denmark)

Thomsen, Bo Stjerne; Jensen, Ole B.

The paper explores how performative urban architecture can enhance community-making and public domain using socio-technical systems and digital technologies to constitute an urban reality. Digital medias developed for the web are now increasingly occupying the urban realm as a tool for navigating...... the physical world e.g. as exemplified by the Google Walk Score and the mobile extension of the Google Maps to the iPhone. At the same time the development in pervasive technologies and situated computing extends the build environment with digital feedback systems that are increasingly embedded and deployed...... using sensor technologies opening up for new access considerations in architecture as well as the ability for a local environment to act as real-time sources of information and facilities. Starting from the NoRA pavilion for the 10th International Architecture Biennale in Venice the paper discusses...

Improving the Psychosocial Work Environment at Multi-Ethnic Workplaces: A Multi-Component Intervention Strategy in the Cleaning Industry

OpenAIRE

Smith, Louise Hardman; Hviid, Kirsten; Frydendall, Karen Bo; Flyvholm, Mari-Ann

2013-01-01

Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workpl...

Design and development of multi-lane smart electromechanical actuators

CERN Document Server

Annaz, Fawaz Yahya

2014-01-01

Design and Development of Multi-Lane Smart Electromechanical Actuators presents the design of electromechanical actuators in two types of architectures, namely, Torque Summed Architecture (TSA) and Velocity Summed Architecture, (VSA). It examines them in: * Hardware redundancy, where the architecture is made up of 3 or 4 lanes. * Digital Math Model redundancy, where a more compact two lanes architectures will be presented. The book starts with the very basic concepts and introduces the design process logically so that an understanding of the smart multi-lane systems that drive an aileron

Optimizing the Performance of Reactive Molecular Dynamics Simulations for Multi-core Architectures

Energy Technology Data Exchange (ETDEWEB)

Aktulga, Hasan Metin [Michigan State Univ., East Lansing, MI (United States); Coffman, Paul [Argonne National Lab. (ANL), Argonne, IL (United States); Shan, Tzu-Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Knight, Chris [Argonne National Lab. (ANL), Argonne, IL (United States); Jiang, Wei [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-12-01

Hybrid parallelism allows high performance computing applications to better leverage the increasing on-node parallelism of modern supercomputers. In this paper, we present a hybrid parallel implementation of the widely used LAMMPS/ReaxC package, where the construction of bonded and nonbonded lists and evaluation of complex ReaxFF interactions are implemented efficiently using OpenMP parallelism. Additionally, the performance of the QEq charge equilibration scheme is examined and a dual-solver is implemented. We present the performance of the resulting ReaxC-OMP package on a state-of-the-art multi-core architecture Mira, an IBM BlueGene/Q supercomputer. For system sizes ranging from 32 thousand to 16.6 million particles, speedups in the range of 1.5-4.5x are observed using the new ReaxC-OMP software. Sustained performance improvements have been observed for up to 262,144 cores (1,048,576 processes) of Mira with a weak scaling efficiency of 91.5% in larger simulations containing 16.6 million particles.

Introduction of an agent-based multi-scale modular architecture for dynamic knowledge representation of acute inflammation

Directory of Open Access Journals (Sweden)

An Gary

2008-05-01

Full Text Available Abstract Background One of the greatest challenges facing biomedical research is the integration and sharing of vast amounts of information, not only for individual researchers, but also for the community at large. Agent Based Modeling (ABM can provide a means of addressing this challenge via a unifying translational architecture for dynamic knowledge representation. This paper presents a series of linked ABMs representing multiple levels of biological organization. They are intended to translate the knowledge derived from in vitro models of acute inflammation to clinically relevant phenomenon such as multiple organ failure. Results and Discussion ABM development followed a sequence starting with relatively direct translation from in-vitro derived rules into a cell-as-agent level ABM, leading on to concatenated ABMs into multi-tissue models, eventually resulting in topologically linked aggregate multi-tissue ABMs modeling organ-organ crosstalk. As an underlying design principle organs were considered to be functionally composed of an epithelial surface, which determined organ integrity, and an endothelial/blood interface, representing the reaction surface for the initiation and propagation of inflammation. The development of the epithelial ABM derived from an in-vitro model of gut epithelial permeability is described. Next, the epithelial ABM was concatenated with the endothelial/inflammatory cell ABM to produce an organ model of the gut. This model was validated against in-vivo models of the inflammatory response of the gut to ischemia. Finally, the gut ABM was linked to a similarly constructed pulmonary ABM to simulate the gut-pulmonary axis in the pathogenesis of multiple organ failure. The behavior of this model was validated against in-vivo and clinical observations on the cross-talk between these two organ systems Conclusion A series of ABMs are presented extending from the level of intracellular mechanism to clinically observed behavior

Sustainability and Built Environment: The role of Higher Education in Architecture and Building Engineering

OpenAIRE

Emilia Conte

2016-01-01

The sustainability paradigm implies a cultural shift in order to really change the world and society. Education, and specifically higher education, plays the crucial role of preparing students to be not only responsible citizens but also actors and promoters of processes and actions for a sustainable development. This is important in general and even more significant in architecture and engineering fields, as those students will be the designers of the built environment of tomorrow.This paper...

Seafloor classification using artificial neural network architecture from central western continental shelf of India

Science.gov (United States)

Mahale, Vasudev; Chakraborty, Bishwajit; Navelkar, Gajanan S.; Prabhu Desai, R. G.

2005-04-01

Seafloor classification studies are carried out at the central western continental shelf of India employing two frequency normal incidence single beam echo-sounder backscatter data. Echo waveform data from different seafloor sediment areas are utilized for present study. Three artificial neural network (ANN) architectures, e.g., Self-Organization Feature Maps (SOFM), Multi-Layer Perceptron (MLP), and Learning Vector Quantization (LVQ) are applied for seafloor classifications. In case of MLP, features are extracted from the received echo signal, on the basis of which, classification is carried out. In the case of the SOFM, a simple moving average echo waveform pre-processing technique is found to yield excellent classification results. Finally, LVQ, which is known as ANN of hybrid architecture is found to be the efficient seafloor classifier especially from the point of view of the real-time application. The simultaneously acquired sediment sample, multi-beam bathymetry and side scan sonar and echo waveform based seafloor classifications results are indicative of the depositional (inner shelf), non-depositional or erosion (outer shelf) environment and combination of both in the transition zone. [Work supported by DIT.

Implementation of Grid-computing Framework for Simulation in Multi-scale Structural Analysis

Directory of Open Access Journals (Sweden)

Data Iranata

2010-05-01

Full Text Available A new grid-computing framework for simulation in multi-scale structural analysis is presented. Two levels of parallel processing will be involved in this framework: multiple local distributed computing environments connected by local network to form a grid-based cluster-to-cluster distributed computing environment. To successfully perform the simulation, a large-scale structural system task is decomposed into the simulations of a simplified global model and several detailed component models using various scales. These correlated multi-scale structural system tasks are distributed among clusters and connected together in a multi-level hierarchy and then coordinated over the internet. The software framework for supporting the multi-scale structural simulation approach is also presented. The program architecture design allows the integration of several multi-scale models as clients and servers under a single platform. To check its feasibility, a prototype software system has been designed and implemented to perform the proposed concept. The simulation results show that the software framework can increase the speedup performance of the structural analysis. Based on this result, the proposed grid-computing framework is suitable to perform the simulation of the multi-scale structural analysis.

Multi-Kepler GPU vs. multi-Intel MIC for spin systems simulations

Science.gov (United States)

Bernaschi, M.; Bisson, M.; Salvadore, F.

2014-10-01

We present and compare the performances of two many-core architectures: the Nvidia Kepler and the Intel MIC both in a single system and in cluster configuration for the simulation of spin systems. As a benchmark we consider the time required to update a single spin of the 3D Heisenberg spin glass model by using the Over-relaxation algorithm. We present data also for a traditional high-end multi-core architecture: the Intel Sandy Bridge. The results show that although on the two Intel architectures it is possible to use basically the same code, the performances of a Intel MIC change dramatically depending on (apparently) minor details. Another issue is that to obtain a reasonable scalability with the Intel Phi coprocessor (Phi is the coprocessor that implements the MIC architecture) in a cluster configuration it is necessary to use the so-called offload mode which reduces the performances of the single system. As to the GPU, the Kepler architecture offers a clear advantage with respect to the previous Fermi architecture maintaining exactly the same source code. Scalability of the multi-GPU implementation remains very good by using the CPU as a communication co-processor of the GPU. All source codes are provided for inspection and for double-checking the results.

A Systems Engineering Approach to Architecture Development

Science.gov (United States)

Di Pietro, David A.

2015-01-01

Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles

System Architecture Development for Energy and Water Infrastructure Data Management and Geovisual Analytics

Science.gov (United States)

Berres, A.; Karthik, R.; Nugent, P.; Sorokine, A.; Myers, A.; Pang, H.

2017-12-01

Building an integrated data infrastructure that can meet the needs of a sustainable energy-water resource management requires a robust data management and geovisual analytics platform, capable of cross-domain scientific discovery and knowledge generation. Such a platform can facilitate the investigation of diverse complex research and policy questions for emerging priorities in Energy-Water Nexus (EWN) science areas. Using advanced data analytics, machine learning techniques, multi-dimensional statistical tools, and interactive geovisualization components, such a multi-layered federated platform is being developed, the Energy-Water Nexus Knowledge Discovery Framework (EWN-KDF). This platform utilizes several enterprise-grade software design concepts and standards such as extensible service-oriented architecture, open standard protocols, event-driven programming model, enterprise service bus, and adaptive user interfaces to provide a strategic value to the integrative computational and data infrastructure. EWN-KDF is built on the Compute and Data Environment for Science (CADES) environment in Oak Ridge National Laboratory (ORNL).

SAFAX - An Extensible Authorization Service for Cloud Environments

Directory of Open Access Journals (Sweden)

Samuel Paul Kaluvuri

2015-05-01

Full Text Available Cloud storage services have become increasingly popular in recent years. Users are often registered to multiple cloud storage services that suit different needs. However, the ad-hoc manner in which data sharing between users is implemented leads to issues for these users. For instance, users are required to define different access control policies for each cloud service they use and are responsible for synchronizing their policies across different cloud providers. Users do not have access to a uniform and expressive method to deal with authorization. Current authorization solutions cannot be applied as-is, since they cannot cope with challenges specific to cloud environments. In this paper, we analyze the challenges of data sharing in multi-cloud environments and propose SAFAX, an XACML based authorization service designed to address these challenges. SAFAX's architecture allows users to deploy their access control policies in a standard format, in a single location, and augment policy evaluation with information from user selectable external trust services. We describe the architecture of SAFAX, a prototype implementation based on this architecture, illustrate the extensibility through external trust services and discuss the benefits of using SAFAX from both the user's and cloud provider's perspectives.

Enhancing the Reuse of Digital Resources for Integrated Systems to Represent, Understand and Dynamize Complex Interactions in Architectural Cultural Heritage Environments

Science.gov (United States)

Delgado, F. J.; Martinez, R.; Finat, J.; Martinez, J.; Puche, J. C.; Finat, F. J.

2013-07-01

In this work we develop a multiply interconnected system which involves objects, agents and interactions between them from the use of ICT applied to open repositories, users communities and web services. Our approach is applied to Architectural Cultural Heritage Environments (ACHE). It includes components relative to digital accessibility (to augmented ACHE repositories), contents management (ontologies for the semantic web), semiautomatic recognition (to ease the reuse of materials) and serious videogames (for interaction in urban environments). Their combination provides a support for local real/remote virtual tourism (including some tools for low-level RT display of rendering in portable devices), mobile-based smart interactions (with a special regard to monitored environments) and CH related games (as extended web services). Main contributions to AR models on usual GIS applied to architectural environments, concern to an interactive support performed directly on digital files which allows to access to CH contents which are referred to GIS of urban districts (involving facades, historical or preindustrial buildings) and/or CH repositories in a ludic and transversal way to acquire cognitive, medial and social abilities in collaborative environments.

A method for valuing architecture-based business transformation and measuring the value of solutions architecture

OpenAIRE

Slot, R.G.

2010-01-01

Enterprise and Solution Architecture are key in today’s business environment. It is surprising that the foundation and business case for these activities are nonexistent; the financial value for the business of these activities is largely undetermined. To determine business value of enterprise and solution architecture, this thesis shows how to measure and quantify, in business terms, the value of enterprise architecture-based on business transformation and the value of solution architecture.

Multi-objective reliability redundancy allocation in an interval environment using particle swarm optimization

International Nuclear Information System (INIS)

Zhang, Enze; Chen, Qingwei

2016-01-01

Most of the existing works addressing reliability redundancy allocation problems are based on the assumption of fixed reliabilities of components. In real-life situations, however, the reliabilities of individual components may be imprecise, most often given as intervals, under different operating or environmental conditions. This paper deals with reliability redundancy allocation problems modeled in an interval environment. An interval multi-objective optimization problem is formulated from the original crisp one, where system reliability and cost are simultaneously considered. To render the multi-objective particle swarm optimization (MOPSO) algorithm capable of dealing with interval multi-objective optimization problems, a dominance relation for interval-valued functions is defined with the help of our newly proposed order relations of interval-valued numbers. Then, the crowding distance is extended to the multi-objective interval-valued case. Finally, the effectiveness of the proposed approach has been demonstrated through two numerical examples and a case study of supervisory control and data acquisition (SCADA) system in water resource management. - Highlights: • We model the reliability redundancy allocation problem in an interval environment. • We apply the particle swarm optimization directly on the interval values. • A dominance relation for interval-valued multi-objective functions is defined. • The crowding distance metric is extended to handle imprecise objective functions.

Synchronous optical packet switch architecture with tunable single and multi-channels wavelength converters

Science.gov (United States)

Hamza, Haitham S.; Adel, Reham

2017-07-01

In this paper, we propose a bufferless synchronous optical packet switch (OPS) architecture named the Limited-range wavelength conversion with Dynamic Pump-wavelength Selection (LDPS) architecture. LDPS is equipped with a dedicated limited-range wavelength converters (LRWCs, and a shared pool of parametric wavelength converters (PWCs) with dynamic pump-wavelength selection (DPS). The adoption of hybrid conversion types in the proposed architecture aims at improving the packet loss rate (PLR) compared to conventional architecture with single conversion types, while reducing (or at least maintaining) the conversion distance (d) of used wavelength converters. Packet contention in the proposed architecture is resolved using the first available algorithm (FAA) and the dynamic pump-wavelength selection algorithm (DPSA). The performance of the proposed architecture is compared to two well-known conventional architectures; namely, the LRWC architecture that uses dedicated LRWCS for each input wavelength, and the DPS architecture that uses a shared pool of dynamic pump-wavelength converters (PWCs). Simulation results show that, for the same value of d, the new architecture reduces the PLR compared to the LRWC architecture by up to 40 % and 99.7 % for traffic loads, 0.5 and 1; respectively. In addition, for d = 1 , the new architecture reduces the PLR compared to the DPS architecture by up to 10 % and 99.3 % for traffic loads, 0.5 and 1; respectively.

Radiant exchange in partially specular architectural environments

Science.gov (United States)

Beamer, C. Walter; Muehleisen, Ralph T.

2003-10-01

The radiant exchange method, also known as radiosity, was originally developed for thermal radiative heat transfer applications. Later it was used to model architectural lighting systems, and more recently it has been extended to model acoustic systems. While there are subtle differences in these applications, the basic method is based on solving a system of energy balance equations, and it is best applied to spaces with mainly diffuse reflecting surfaces. The obvious drawback to this method is that it is based around the assumption that all surfaces in the system are diffuse reflectors. Because almost all architectural systems have at least some partially specular reflecting surfaces in the system it is important to extend the radiant exchange method to deal with this type of surface reflection. [Work supported by NSF.

Performative Environments

DEFF Research Database (Denmark)

Thomsen, Bo Stjerne

2008-01-01

The paper explores how performative architecture can act as a collective environment localizing urban flows and establishing public domains through the integration of pervasive computing and animation techniques. The NoRA project introduces the concept of ‘performative environments,' focusing on ...... of local interactions and network behaviour, building becomes social infrastructure and prompts an understanding of architectural structures as quasiobjects, which can retain both variation and recognisability in changing social constellations.......The paper explores how performative architecture can act as a collective environment localizing urban flows and establishing public domains through the integration of pervasive computing and animation techniques. The NoRA project introduces the concept of ‘performative environments,' focusing...

An Embedded Multi-Agent Systems Based Industrial Wireless Sensor Network

Science.gov (United States)

Brennan, Robert W.

2017-01-01

With the emergence of cyber-physical systems, there has been a growing interest in network-connected devices. One of the key requirements of a cyber-physical device is the ability to sense its environment. Wireless sensor networks are a widely-accepted solution for this requirement. In this study, an embedded multi-agent systems-managed wireless sensor network is presented. A novel architecture is proposed, along with a novel wireless sensor network architecture. Active and passive wireless sensor node types are defined, along with their communication protocols, and two application-specific examples are presented. A series of three experiments is conducted to evaluate the performance of the agent-embedded wireless sensor network. PMID:28906452

An Investigation of Factors Affecting Multi-Task Performance in an Immersive Environment

National Research Council Canada - National Science Library

Branscome, Teresa A; Grynovicki, Jock O

2007-01-01

This report presents the results of a study included in a series of investigations designed to increase fundamental knowledge and understanding of the factors affecting multi-task performance in a military environment...

The Architecture and Beyond of Tread and Riser

Directory of Open Access Journals (Sweden)

Sai Sanath

2016-01-01

The primary constitution of stairs is the arrangement of horizontal and vertical measures known as tread and riser. This is the simplest arrangement that essentially conveys people from one level to the other with required comfort and safety. Steps are a universal symbol with multiple interpretations. They are the most generally used similes in art, philosophy and psychology. Stairs occupy a unique status in the built environment because they not only convey people, but also symbolize the psychological, spiritual and artistic aspects of human nature. The mental significance and symbolic connotations of steps are deeply rooted. Understanding the role of stairs in different spheres of human need and expression is crucial in approaching its design. The pattern of stairs is dependent on the type of materials and other related design considerations. It is one of the unique architectural entities that reflect the various facets of social, psychological, artistic, metaphysical and religious dimensions. The importance of physical activity in the rising sedentary life styles is linked to the design of building elements, especially the staircases. The advancement in technology has displaced the role of stairs into an inconsequential means of emergency escape. But the importance of physical activity in the rising sedentary lifestyle has revitalized the concept of stairs as an active building component. The mono functional approach to staircases in high-rise buildings, especially as the means of escape in emergency situations, indicates that the design of staircases as multi functional element is still under the confines of design explorations. This paper is an attempt to understand the concept of stairs not only from the evolutionary point of view, but also the associated metaphoric meanings and its emerging multi facet identity. The concept of vertical accessibility in the form of tread and riser arrangement makes stairs a timeless phenomenon. The approach to multi utility

L1 Adaptive Control Augmentation System with Application to the X-29 Lateral/Directional Dynamics: A Multi-Input Multi-Output Approach

Science.gov (United States)

Griffin, Brian Joseph; Burken, John J.; Xargay, Enric

2010-01-01

This paper presents an L(sub 1) adaptive control augmentation system design for multi-input multi-output nonlinear systems in the presence of unmatched uncertainties which may exhibit significant cross-coupling effects. A piecewise continuous adaptive law is adopted and extended for applicability to multi-input multi-output systems that explicitly compensates for dynamic cross-coupling. In addition, explicit use of high-fidelity actuator models are added to the L1 architecture to reduce uncertainties in the system. The L(sub 1) multi-input multi-output adaptive control architecture is applied to the X-29 lateral/directional dynamics and results are evaluated against a similar single-input single-output design approach.

The Value of Architecture

DEFF Research Database (Denmark)

Beim, Anne

2018-01-01

of Europe’s architectural heritage. This resulted in a greater emphasis on building conservation and led to the development of the Survey of Architectural Values in the Environment (SAVE) by the Danish heritage authorities. The value assessment was initially meant for evaluating building heritage...... and authorities in efforts to evaluate the cultural value of the built environment. The National Trust of Norway is a voluntary association, a trust, and a property owner. Since 1845, it has developed expertise in restoration and maintenance of historical monuments. It is based on personal memberships...

Architecture Approach in System Development

Directory of Open Access Journals (Sweden)

Ladislav Burita

2017-01-01

Full Text Available The purpose of this paper is to describe a practical solution of architecture approach in system development. The software application is the system which optimizes the transport service. The first part of the paper defines the enterprise architecture, its parts and frameworks. Next is explained the NATO Architecture Framework (NAF, a tool for command and control systems development in military environment. The NAF is used for architecture design of the system for optimization of the transport service.

Optimization of multi-environment trials for genomic selection based on crop models.

Science.gov (United States)

Rincent, R; Kuhn, E; Monod, H; Oury, F-X; Rousset, M; Allard, V; Le Gouis, J

2017-08-01

We propose a statistical criterion to optimize multi-environment trials to predict genotype × environment interactions more efficiently, by combining crop growth models and genomic selection models. Genotype × environment interactions (GEI) are common in plant multi-environment trials (METs). In this context, models developed for genomic selection (GS) that refers to the use of genome-wide information for predicting breeding values of selection candidates need to be adapted. One promising way to increase prediction accuracy in various environments is to combine ecophysiological and genetic modelling thanks to crop growth models (CGM) incorporating genetic parameters. The efficiency of this approach relies on the quality of the parameter estimates, which depends on the environments composing this MET used for calibration. The objective of this study was to determine a method to optimize the set of environments composing the MET for estimating genetic parameters in this context. A criterion called OptiMET was defined to this aim, and was evaluated on simulated and real data, with the example of wheat phenology. The MET defined with OptiMET allowed estimating the genetic parameters with lower error, leading to higher QTL detection power and higher prediction accuracies. MET defined with OptiMET was on average more efficient than random MET composed of twice as many environments, in terms of quality of the parameter estimates. OptiMET is thus a valuable tool to determine optimal experimental conditions to best exploit MET and the phenotyping tools that are currently developed.

IMPETUS - Interactive MultiPhysics Environment for Unified Simulations.

Science.gov (United States)

Ha, Vi Q; Lykotrafitis, George

2016-12-08

We introduce IMPETUS - Interactive MultiPhysics Environment for Unified Simulations, an object oriented, easy-to-use, high performance, C++ program for three-dimensional simulations of complex physical systems that can benefit a large variety of research areas, especially in cell mechanics. The program implements cross-communication between locally interacting particles and continuum models residing in the same physical space while a network facilitates long-range particle interactions. Message Passing Interface is used for inter-processor communication for all simulations. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Multi-Level Investigation into the Antecedents of Enterprise Architecture (EA) Assimilation in the U.S. Federal Government: A Longitudinal Mixed Methods Research Study

Science.gov (United States)

Makiya, George K.

2012-01-01

This dissertation reports on a multi-dimensional longitudinal investigation of the factors that influence Enterprise Architecture (EA) diffusion and assimilation within the U.S. federal government. The study uses publicly available datasets of 123 U.S. federal departments and agencies, as well as interview data among CIOs and EA managers within…

A New Multi-Sensor Track Fusion Architecture for Multi-Sensor Information Integration

National Research Council Canada - National Science Library

Jean, Buddy H; Younker, John; Hung, Chih-Cheng

2004-01-01

.... This new technology will integrate multi-sensor information and extract integrated multi-sensor information to detect, track and identify multiple targets at any time, in any place under all weather conditions...

MT-ADRES: Multithreading on Coarse-Grained Reconfigurable Architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2007-01-01

The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl’s law, this paper proposes to extend ADRES to MT-ADRES (Multi-Threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned in multiple...

Measurements of Thermal and Wind Environment of Vernacular Architecture made of Adobe in Morocco

OpenAIRE

Deguchi, Kiyotaka; Sugawara, Keiko

2010-01-01

This paper deals with the field measurements on thermal and wind environment of a vernacular architecture made of adobe called “Kasbah” in Morocco．It has a courtyard and watch towers in corners．Investigation was carried out by measuring temperature，humidity，wind velocity，heat transfer，etc. The thermal comfort was evaluated by the index of SET*. The courtyard is evaluated as comfort by SET* at the time of the shadow zone，and the central room at the first floor was almost comfort because of th...

Bionics in architecture

Directory of Open Access Journals (Sweden)

Sugár Viktória

2017-04-01

Full Text Available The adaptation of the forms and phenomena of nature is not a recent concept. Observation of natural mechanisms has been a primary source of innovation since prehistoric ages, which can be perceived through the history of architecture. Currently, this idea is coming to the front again through sustainable architecture and adaptive design. Investigating natural innovations and the clear-outness of evolution during the 20th century led to the creation of a separate scientific discipline, Bionics. Architecture and Bionics are strongly related to each other, since the act of building is as old as the human civilization - moreover its first formal and structural source was obviously the surrounding environment. Present paper discusses the definition of Bionics and its connection with the architecture.

Multi-layered breathing architectural envelope

DEFF Research Database (Denmark)

Lund Larsen, Andreas; Foged, Isak Worre; Jensen, Rasmus Lund

2014-01-01

A multi layered breathing envelope is developed as a method of natural ventilation. The two main layers consist of mineral wool and air permeable concrete. The mineral wool works as a dynamic insulation and the permeable concrete as a heat recovery system with a high thermal mass for heat storage...

Scientific Visualization and Simulation for Multi-dimensional Marine Environment Data

Science.gov (United States)

Su, T.; Liu, H.; Wang, W.; Song, Z.; Jia, Z.

2017-12-01

As higher attention on the ocean and rapid development of marine detection, there are increasingly demands for realistic simulation and interactive visualization of marine environment in real time. Based on advanced technology such as GPU rendering, CUDA parallel computing and rapid grid oriented strategy, a series of efficient and high-quality visualization methods, which can deal with large-scale and multi-dimensional marine data in different environmental circumstances, has been proposed in this paper. Firstly, a high-quality seawater simulation is realized by FFT algorithm, bump mapping and texture animation technology. Secondly, large-scale multi-dimensional marine hydrological environmental data is virtualized by 3d interactive technologies and volume rendering techniques. Thirdly, seabed terrain data is simulated with improved Delaunay algorithm, surface reconstruction algorithm, dynamic LOD algorithm and GPU programming techniques. Fourthly, seamless modelling in real time for both ocean and land based on digital globe is achieved by the WebGL technique to meet the requirement of web-based application. The experiments suggest that these methods can not only have a satisfying marine environment simulation effect, but also meet the rendering requirements of global multi-dimension marine data. Additionally, a simulation system for underwater oil spill is established by OSG 3D-rendering engine. It is integrated with the marine visualization method mentioned above, which shows movement processes, physical parameters, current velocity and direction for different types of deep water oil spill particle (oil spill particles, hydrates particles, gas particles, etc.) dynamically and simultaneously in multi-dimension. With such application, valuable reference and decision-making information can be provided for understanding the progress of oil spill in deep water, which is helpful for ocean disaster forecasting, warning and emergency response.

An Improvement of Robust Biometrics-Based Authentication and Key Agreement Scheme for Multi-Server Environments Using Smart Cards.

Science.gov (United States)

Moon, Jongho; Choi, Younsung; Jung, Jaewook; Won, Dongho

2015-01-01

In multi-server environments, user authentication is a very important issue because it provides the authorization that enables users to access their data and services; furthermore, remote user authentication schemes for multi-server environments have solved the problem that has arisen from user's management of different identities and passwords. For this reason, numerous user authentication schemes that are designed for multi-server environments have been proposed over recent years. In 2015, Lu et al. improved upon Mishra et al.'s scheme, claiming that their remote user authentication scheme is more secure and practical; however, we found that Lu et al.'s scheme is still insecure and incorrect. In this paper, we demonstrate that Lu et al.'s scheme is vulnerable to outsider attack and user impersonation attack, and we propose a new biometrics-based scheme for authentication and key agreement that can be used in multi-server environments; then, we show that our proposed scheme is more secure and supports the required security properties.

Affective Architecture. Film as a Sensory Transference Tool and an Intimacy Projection Environment

DEFF Research Database (Denmark)

Petersen, Rikke Munck; Farsø, Mads

2016-01-01

, with our bodies, perceive space and project space. Through an analysis of two films, it points to the medium of film as both a tool and an environment, based on Gernot Böhme’s ‘Raum leiblicher Anwesenheit (Böhme 2006). These films illustrate how the film’s picture frame becomes almost like a skin......This paper elucidates how film may offer itself as a tool for both the representation and conception of space that can strengthen an alternative, phenomenological and transcendental position in architecture. The paper underscores that the film camera can work as a kind of amplifier of how we...... and through its surface and sound projects both a site and a near-sensual experience simultaneously. The medium of film as both tool and an environment thereby supports an extended sensory-intimate reflection on outer experiences and inner sensations that – in its audio-visual and time...

Applying DLM and DCM concepts in a multi-scale data environment

NARCIS (Netherlands)

Stoter, Jantien; Meijers, Martijn; van Oosterom, Peter J.M.; Grünreich, Dietmar; Kraak, Menno-Jan

2010-01-01

This extended abstract presents work in progress in which we explore the DLM and DCM concepts in a multi-scale topographic data environment. The abstract is prepared as input for the Symposium on Generalisation and Data Integration (GDI), University of Colorado, Boulder, 20-22 June 2010.

Capital Architecture: Situating symbolism parallel to architectural methods and technology

Science.gov (United States)

Daoud, Bassam

Capital Architecture is a symbol of a nation's global presence and the cultural and social focal point of its inhabitants. Since the advent of High-Modernism in Western cities, and subsequently decolonised capitals, civic architecture no longer seems to be strictly grounded in the philosophy that national buildings shape the legacy of government and the way a nation is regarded through its built environment. Amidst an exceedingly globalized architectural practice and with the growing concern of key heritage foundations over the shortcomings of international modernism in representing its immediate socio-cultural context, the contextualization of public architecture within its sociological, cultural and economic framework in capital cities became the key denominator of this thesis. Civic architecture in capital cities is essential to confront the challenges of symbolizing a nation and demonstrating the legitimacy of the government'. In today's dominantly secular Western societies, governmental architecture, especially where the seat of political power lies, is the ultimate form of architectural expression in conveying a sense of identity and underlining a nation's status. Departing with these convictions, this thesis investigates the embodied symbolic power, the representative capacity, and the inherent permanence in contemporary architecture, and in its modes of production. Through a vast study on Modern architectural ideals and heritage -- in parallel to methodologies -- the thesis stimulates the future of large scale governmental building practices and aims to identify and index the key constituents that may respond to the lack representation in civic architecture in capital cities.

Bus-based architectures in the H1 data acquisition system

International Nuclear Information System (INIS)

Haynes, W.J.

1992-08-01

The recently commissioned Hadron-Electron Ring Anage (HERA) electron-proton collider at DESY, Deutsches Elektronen Synchrotron has presented a challenging environment in coping with huge volumes of data in real-time. With bunch-crossing intervals of 96 nanoseconds, the H1 experiment can generate nearly 3 Megabytes of raw digital information from several hundred thousand electronic channels. The open VMEbus standard is exploited to provide the necessary modularity and system flexibility for embedding fast readout electronics in a multiprocessor design array. The architectural concepts of the data acquisition structure are discussed together with many of the experiences gained in implementing a large multi-crate system. (author)

Architectural Anthropology

DEFF Research Database (Denmark)

Stender, Marie

Architecture and anthropology have always had a common focus on dwelling, housing, urban life and spatial organisation. Current developments in both disciplines make it even more relevant to explore their boundaries and overlaps. Architects are inspired by anthropological insights and methods......, while recent material and spatial turns in anthropology have also brought an increasing interest in design, architecture and the built environment. Understanding the relationship between the social and the physical is at the heart of both disciplines, and they can obviously benefit from further...... collaboration: How can qualitative anthropological approaches contribute to contemporary architecture? And just as importantly: What can anthropologists learn from architects’ understanding of spatial and material surroundings? Recent theoretical developments in anthropology stress the role of materials...

Cost Analysis In A Multi-Mission Operations Environment

Science.gov (United States)

Newhouse, M.; Felton, L.; Bornas, N.; Botts, D.; Roth, K.; Ijames, G.; Montgomery, P.

2014-01-01

Spacecraft control centers have evolved from dedicated, single-mission or single missiontype support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multimission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the

Multi-fields' coordination information integrated platform for nuclear power plant operation preparation

International Nuclear Information System (INIS)

Yuan Chang; Li Yong; Ye Zhiqiang

2011-01-01

To realize the coordination in multi-fields' work and information sharing, by applying the method of Enterprise Architecture (EA), the business architecture, functional flow and application architecture of Nuclear Power Plant's operation preparation information integrated platform are designed, which can realize the information sharing and coordination of multi fields. (authors)

AVSynDEx: A Rapid Prototyping Process Dedicated to the Implementation of Digital Image Processing Applications on Multi-DSP and FPGA Architectures

Directory of Open Access Journals (Sweden)

Fresse Virginie

2002-01-01

Full Text Available We present AVSynDEx (concatenation of AVS SynDEx, a rapid prototyping process aiming to the implementation of digital signal processing applications on mixed architectures (multi-DSP FPGA. This process is based on the use of widely available and efficient CAD tools established along the design process so that most of the implementation tasks become automatic. These tools and architectures are judiciously selected and integrated during the implementation process to help a signal processing specialist without relevant hardware experience. We have automated the translation between the different levels of the process to increase and secure it. One main advantage is that only a signal processing designer is needed, all the other specialized manual tasks being transparent in this prototyping methodology, hereby reducing the implementation time.

Constructional Efficiency in Al_Ahwaar Traditional Architecture

Directory of Open Access Journals (Sweden)

Usama Abdul-Mun'em Khuraibet

2016-03-01

Full Text Available Constructional Efficiency in architecture in general is one of the most important standard success for any structure and a measure of its continuity and relevance across time and space. Given the importance of Al-Ahwaar environment that owned the spatial, environmental, economic and social elements had a prominent impact in creation of architecture patterns form to create special architectural and structural environment, which had many qualities and ingredients that contributed to its continuity and existence over the years. From the premise that man and his environment is the main goal to any architectural style, Thus the research problem focusing on the lack of clarity of the previous literatures in its studies for the role of architectural styles in Al-Ahwaar in achieving constructional efficiency, despite the large number of studies on Al-Ahwaar architecture but it is mostly marked by non-clarity and lack in the constructional and technical aspects, Therefore, the research goal focusing on clarification of the impact of the techniques that used in formations Al_Ahwaar traditional architecture in order to reach to the constructional efficiency in various aspects such as technical, material, economical, and expressional. Assuming that achieving to the constructional efficiency at Al-Ahwaar traditional architecture depends on its characteristics and elements that contributed to the continuity of their patterns across time. The research depended on analytical method of a model of traditional architecture in Al-Ahwaar to reach those goals, as the study of these items aims to deepen the understanding of the designer to the requirements of each component in order to achieve integration together. These components must not conflict with each other, but it must be integrated during and after the design process until it comes out as a creative of architectural destination. al-ahwaar architecture, constructional efficiency, technical and material

Design and implementation of space physics multi-model application integration based on web

Science.gov (United States)

Jiang, Wenping; Zou, Ziming

With the development of research on space environment and space science, how to develop network online computing environment of space weather, space environment and space physics models for Chinese scientific community is becoming more and more important in recent years. Currently, There are two software modes on space physics multi-model application integrated system (SPMAIS) such as C/S and B/S. the C/S mode which is traditional and stand-alone, demands a team or workshop from many disciplines and specialties to build their own multi-model application integrated system, that requires the client must be deployed in different physical regions when user visits the integrated system. Thus, this requirement brings two shortcomings: reducing the efficiency of researchers who use the models to compute; inconvenience of accessing the data. Therefore, it is necessary to create a shared network resource access environment which could help users to visit the computing resources of space physics models through the terminal quickly for conducting space science research and forecasting spatial environment. The SPMAIS develops high-performance, first-principles in B/S mode based on computational models of the space environment and uses these models to predict "Space Weather", to understand space mission data and to further our understanding of the solar system. the main goal of space physics multi-model application integration system (SPMAIS) is to provide an easily and convenient user-driven online models operating environment. up to now, the SPMAIS have contained dozens of space environment models , including international AP8/AE8 IGRF T96 models and solar proton prediction model geomagnetic transmission model etc. which are developed by Chinese scientists. another function of SPMAIS is to integrate space observation data sets which offers input data for models online high-speed computing. In this paper, service-oriented architecture (SOA) concept that divides system into

Electromagnetic Physics Models for Parallel Computing Architectures

Science.gov (United States)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Duhem, L.; Elvira, D.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2016-10-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well.

The Jupyter/IPython architecture: a unified view of computational research, from interactive exploration to communication and publication.

Science.gov (United States)

Ragan-Kelley, M.; Perez, F.; Granger, B.; Kluyver, T.; Ivanov, P.; Frederic, J.; Bussonnier, M.

2014-12-01

IPython has provided terminal-based tools for interactive computing in Python since 2001. The notebook document format and multi-process architecture introduced in 2011 have expanded the applicable scope of IPython into teaching, presenting, and sharing computational work, in addition to interactive exploration. The new architecture also allows users to work in any language, with implementations in Python, R, Julia, Haskell, and several other languages. The language agnostic parts of IPython have been renamed to Jupyter, to better capture the notion that a cross-language design can encapsulate commonalities present in computational research regardless of the programming language being used. This architecture offers components like the web-based Notebook interface, that supports rich documents that combine code and computational results with text narratives, mathematics, images, video and any media that a modern browser can display. This interface can be used not only in research, but also for publication and education, as notebooks can be converted to a variety of output formats, including HTML and PDF. Recent developments in the Jupyter project include a multi-user environment for hosting notebooks for a class or research group, a live collaboration notebook via Google Docs, and better support for languages other than Python.

Architecture at Hydro-Quebec. L'architecture a Hydro-Quebec

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

Architecture at Hydro-Quebec is concerned not only with combining function and aesthetics in designing buildings and other structures for an electrical utility, but also to satisfy technical and administrative needs and to help solve contemporary problems such as the rational use of energy. Examples are presented of Hydro-Quebec's architectural accomplishments in the design of hydroelectric power stations and their surrounding landscapes, thermal power stations, transmission substations, research and testing facilities, and administrative buildings. It is shown how some buildings are designed to adapt to local environments and to conserve energy. The utility's policy of conserving installations of historic value, such as certain pre-1930 power stations, is illustrated, and aspects of its general architectural policy are outlined. 20 figs.

Computer Architecture A Quantitative Approach

CERN Document Server

Hennessy, John L

2007-01-01

The era of seemingly unlimited growth in processor performance is over: single chip architectures can no longer overcome the performance limitations imposed by the power they consume and the heat they generate. Today, Intel and other semiconductor firms are abandoning the single fast processor model in favor of multi-core microprocessors--chips that combine two or more processors in a single package. In the fourth edition of Computer Architecture, the authors focus on this historic shift, increasing their coverage of multiprocessors and exploring the most effective ways of achieving parallelis

On the Design of Smart Homes: A Framework for Activity Recognition in Home Environment.

Science.gov (United States)

Cicirelli, Franco; Fortino, Giancarlo; Giordano, Andrea; Guerrieri, Antonio; Spezzano, Giandomenico; Vinci, Andrea

2016-09-01

A smart home is a home environment enriched with sensing, actuation, communication and computation capabilities which permits to adapt it to inhabitants preferences and requirements. Establishing a proper strategy of actuation on the home environment can require complex computational tasks on the sensed data. This is the case of activity recognition, which consists in retrieving high-level knowledge about what occurs in the home environment and about the behaviour of the inhabitants. The inherent complexity of this application domain asks for tools able to properly support the design and implementation phases. This paper proposes a framework for the design and implementation of smart home applications focused on activity recognition in home environments. The framework mainly relies on the Cloud-assisted Agent-based Smart home Environment (CASE) architecture offering basic abstraction entities which easily allow to design and implement Smart Home applications. CASE is a three layered architecture which exploits the distributed multi-agent paradigm and the cloud technology for offering analytics services. Details about how to implement activity recognition onto the CASE architecture are supplied focusing on the low-level technological issues as well as the algorithms and the methodologies useful for the activity recognition. The effectiveness of the framework is shown through a case study consisting of a daily activity recognition of a person in a home environment.

Role of Librarian in Internet and World Wide Web Environment

OpenAIRE

K. Nageswara Rao; KH Babu

2001-01-01

The transition of traditional library collections to digital or virtual collections presented the librarian with new opportunities. The Internet, Web en-vironment and associated sophisticated tools have given the librarian a new dynamic role to play and serve the new information based society in bet-ter ways than hitherto. Because of the powerful features of Web i.e. distributed, heterogeneous, collaborative, multimedia, multi-protocol, hyperme-dia-oriented architecture, World Wide Web has re...

An agent based architecture for high-risk neonate management at neonatal intensive care unit.

Science.gov (United States)

Malak, Jaleh Shoshtarian; Safdari, Reza; Zeraati, Hojjat; Nayeri, Fatemeh Sadat; Mohammadzadeh, Niloofar; Farajollah, Seide Sedighe Seied

2018-01-01

In recent years, the use of new tools and technologies has decreased the neonatal mortality rate. Despite the positive effect of using these technologies, the decisions are complex and uncertain in critical conditions when the neonate is preterm or has a low birth weight or malformations. There is a need to automate the high-risk neonate management process by creating real-time and more precise decision support tools. To create a collaborative and real-time environment to manage neonates with critical conditions at the NICU (Neonatal Intensive Care Unit) and to overcome high-risk neonate management weaknesses by applying a multi agent based analysis and design methodology as a new solution for NICU management. This study was a basic research for medical informatics method development that was carried out in 2017. The requirement analysis was done by reviewing articles on NICU Decision Support Systems. PubMed, Science Direct, and IEEE databases were searched. Only English articles published after 1990 were included; also, a needs assessment was done by reviewing the extracted features and current processes at the NICU environment where the research was conducted. We analyzed the requirements and identified the main system roles (agents) and interactions by a comparative study of existing NICU decision support systems. The Universal Multi Agent Platform (UMAP) was applied to implement a prototype of our multi agent based high-risk neonate management architecture. Local environment agents interacted inside a container and each container interacted with external resources, including other NICU systems and consultation centers. In the NICU container, the main identified agents were reception, monitoring, NICU registry, and outcome prediction, which interacted with human agents including nurses and physicians. Managing patients at the NICU units requires online data collection, real-time collaboration, and management of many components. Multi agent systems are applied as

Multilevel QoS-policy-based routing management architecture appropriate for heterogeneous network environments

Science.gov (United States)

Chatzaki, Magda; Sartzetakis, Stelios

1998-09-01

As telecom providers introduce new and more sophisticated services the necessity of a global, unified view of the network infrastructure becomes demanding. Today, heterogenous backbone networks are interconnected in order to provide global connectivity. Due to technological impairments the cost of network operation, the maintenance complexity and the overuse of resources are extremely high under the goal of supporting the diverting customer requirements. We propose a scheme for ATM QoS support in such heterogenous, multi-domain, multi-technology network environment. The objective is to optimize users' and networks' profits by giving them the opportunity to satisfy their requirements. Our approach introduces a manager able to take routing decisions supporting quality of service guarantees for the customers, while making efficient use of network resources.

Development of a Survivable Cloud Multi-Robot Framework for Heterogeneous Environments

Directory of Open Access Journals (Sweden)

Isaac Osunmakinde

2014-10-01

Full Text Available Cloud robotics is a paradigm that allows for robots to offload computationally intensive and data storage requirements into the cloud by providing a secure and customizable environment. The challenge for cloud robotics is the inherent problem of cloud disconnection. A major assumption made in the development of the current cloud robotics frameworks is that the connection between the cloud and the robot is always available. However, for multi-robots working in heterogeneous environments, the connection between the cloud and the robots cannot always be guaranteed. This work serves to assist with the challenge of disconnection in cloud robotics by proposing a survivable cloud multi-robotics (SCMR framework for heterogeneous environments. The SCMR framework leverages the combination of a virtual ad hoc network formed by robot-to-robot communication and a physical cloud infrastructure formed by robot-to-cloud communications. The quality of service (QoS on the SCMR framework was tested and validated by determining the optimal energy utilization and time of response (ToR on drivability analysis with and without cloud connection. The design trade-off, including the result, is between the computation energy for the robot execution and the offloading energy for the cloud execution.

A Compute Environment of ABC95 Array Computer Based on Multi-FPGA Chip

Institute of Scientific and Technical Information of China (English)

无

2000-01-01

ABC95 array computer is a multi-function network's computer based on FPGA technology, The multi-function network supports processors conflict-free access data from memory and supports processors access data from processors based on enhanced MESH network.ABC95 instruction's system includes control instructions, scalar instructions, vectors instructions.Mostly net-work instructions are introduced.A programming environment of ABC95 array computer assemble language is designed.A programming environment of ABC95 array computer for VC++ is advanced.It includes load function of ABC95 array computer program and data, store function, run function and so on.Specially, The data type of ABC95 array computer conflict-free access is defined.The results show that these technologies can develop programmer of ABC95 array computer effectively.

Application of Advanced Multi-Core Processor Technologies to Oceanographic Research

Science.gov (United States)

2013-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Application of Advanced Multi-Core Processor Technologies...STM32 NXP LPC series No Proprietary Microchip PIC32/DSPIC No > 500 mW; < 5 W ARM Cortex TI OMAP TI Sitara Broadcom BCM2835 Varies FPGA...state-of-the-art information processing architectures. OBJECTIVES Next-generation processor architectures (multi-core, multi-threaded) hold the

3D mechanical stratigraphy of a deformed multi-layer: Linking sedimentary architecture and strain partitioning

Science.gov (United States)

Cawood, Adam J.; Bond, Clare E.

2018-01-01

Stratigraphic influence on structural style and strain distribution in deformed sedimentary sequences is well established, in models of 2D mechanical stratigraphy. In this study we attempt to refine existing models of stratigraphic-structure interaction by examining outcrop scale 3D variations in sedimentary architecture and the effects on subsequent deformation. At Monkstone Point, Pembrokeshire, SW Wales, digital mapping and virtual scanline data from a high resolution virtual outcrop have been combined with field observations, sedimentary logs and thin section analysis. Results show that significant variation in strain partitioning is controlled by changes, at a scale of tens of metres, in sedimentary architecture within Upper Carboniferous fluvio-deltaic deposits. Coupled vs uncoupled deformation of the sequence is defined by the composition and lateral continuity of mechanical units and unit interfaces. Where the sedimentary sequence is characterized by gradational changes in composition and grain size, we find that deformation structures are best characterized by patterns of distributed strain. In contrast, distinct compositional changes vertically and in laterally equivalent deposits results in highly partitioned deformation and strain. The mechanical stratigraphy of the study area is inherently 3D in nature, due to lateral and vertical compositional variability. Consideration should be given to 3D variations in mechanical stratigraphy, such as those outlined here, when predicting subsurface deformation in multi-layers.

System design in an evolving system-of-systems architecture and concept of operations

Science.gov (United States)

Rovekamp, Roger N., Jr.

Proposals for space exploration architectures have increased in complexity and scope. Constituent systems (e.g., rovers, habitats, in-situ resource utilization facilities, transfer vehicles, etc) must meet the needs of these architectures by performing in multiple operational environments and across multiple phases of the architecture's evolution. This thesis proposes an approach for using system-of-systems engineering principles in conjunction with system design methods (e.g., Multi-objective optimization, genetic algorithms, etc) to create system design options that perform effectively at both the system and system-of-systems levels, across multiple concepts of operations, and over multiple architectural phases. The framework is presented by way of an application problem that investigates the design of power systems within a power sharing architecture for use in a human Lunar Surface Exploration Campaign. A computer model has been developed that uses candidate power grid distribution solutions for a notional lunar base. The agent-based model utilizes virtual control agents to manage the interactions of various exploration and infrastructure agents. The philosophy behind the model is based both on lunar power supply strategies proposed in literature, as well as on the author's own approaches for power distribution strategies of future lunar bases. In addition to proposing a framework for system design, further implications of system-of-systems engineering principles are briefly explored, specifically as they relate to producing more robust cross-cultural system-of-systems architecture solutions.

An Improvement of Robust Biometrics-Based Authentication and Key Agreement Scheme for Multi-Server Environments Using Smart Cards

Science.gov (United States)

Moon, Jongho; Choi, Younsung; Jung, Jaewook; Won, Dongho

2015-01-01

In multi-server environments, user authentication is a very important issue because it provides the authorization that enables users to access their data and services; furthermore, remote user authentication schemes for multi-server environments have solved the problem that has arisen from user’s management of different identities and passwords. For this reason, numerous user authentication schemes that are designed for multi-server environments have been proposed over recent years. In 2015, Lu et al. improved upon Mishra et al.’s scheme, claiming that their remote user authentication scheme is more secure and practical; however, we found that Lu et al.’s scheme is still insecure and incorrect. In this paper, we demonstrate that Lu et al.’s scheme is vulnerable to outsider attack and user impersonation attack, and we propose a new biometrics-based scheme for authentication and key agreement that can be used in multi-server environments; then, we show that our proposed scheme is more secure and supports the required security properties. PMID:26709702

Urban Sustainability through Public Architecture

Directory of Open Access Journals (Sweden)

Soomi Kim

2018-04-01

Full Text Available As the sustainability of contemporary cities has gained emphasis, interest in architecture has increased, due to its social and public responsibility. Since sustainability is linked to public values, research on sustainable public spaces is an important way to secure sustainability in cities. Based on this, we analyzed the sustainability of European cities by examining the design methods of public architecture according to the region. The aim of the study is to derive architectural methodology corresponding to local characteristics, and to suggest issues to consider in public architecture design to promote urban sustainability based on this. First, regarding the environmental aspect, it can be observed that there is an effort to secure sustainability. Second, in terms of social sustainability, historical value remains as a trace of architectural place, so that it continues in people’s memory. In addition, public architecture provides public places where citizens can gather and enjoy programs, while the architectural methods showed differences influenced by cultural conditions. Third, in economic sustainability, it was shown that energy saving was achieved through cost reduction through recycling of materials, facilities, or environmental factors. In conclusion, the issues to be considered in public architectural design are the voiding of urban space through architectural devices in the construction method. In other words, the intention is to form “ground” that attempts to be part of the city, and thereby create better places. Since skin and material have a deep relationship with the environment, they should have the durability and an outer skin that are suitable for the regional environment. Finally, sustainability is to be utilized through the influx of programs that meet local and environmental characteristics. Design research into public architecture that is oriented towards urban sustainability will be a task to be carried out by the

An Internet of Things platform architecture for supporting ambient assisted living environments.

Science.gov (United States)

Tsirmpas, Charalampos; Kouris, Ioannis; Anastasiou, Athanasios; Giokas, Kostas; Iliopoulou, Dimitra; Koutsouris, Dimitris

2017-01-01

Internet of Things (IoT) is the logical further development of today's Internet, enabling a huge amount of devices to communicate, compute, sense and act. IoT sensors placed in Ambient Assisted Living (AAL) environments, enable the context awareness and allow the support of the elderly in their daily routines, ultimately allowing an independent and safe lifestyle. The vast amount of data that are generated and exchanged between the IoT nodes require innovative context modeling approaches that go beyond currently used models. Current paper presents and evaluates an open interoperable platform architecture in order to utilize the technical characteristics of IoT and handle the large amount of generated data, as a solution to the technical requirements of AAL applications.

Distribution of multi-resistant Gram-negative versus Gram-positive bacteria in the hospital inanimate environment.

Science.gov (United States)

Lemmen, S W; Häfner, H; Zolldann, D; Stanzel, S; Lütticken, R

2004-03-01

We prospectively studied the difference in detection rates of multi-resistant Gram-positive and multi-resistant Gram-negative bacteria in the inanimate environment of patients harbouring these organisms. Up to 20 different locations around 190 patients were surveyed. Fifty-four patients were infected or colonized with methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant enterococci (VRE) and 136 with multi-resistant Gram-negative bacteria. The environmental detection rate for MRSA or VRE was 24.7% (174/705 samples) compared with 4.9% (89/1827 samples) for multi-resistant Gram-negative bacteria (PGram-positive bacteria were isolated more frequently than Gram-negatives from the hands of patients (PGram-positive and Gram-negative isolates. Our results suggest that the inanimate environment serves as a secondary source for MRSA and VRE, but less so for Gram-negative bacteria. Thus, strict contact isolation in a single room with complete barrier precautions is recommended for MRSA or VRE; however, for multi-resistant Gram-negative bacteria, contact isolation with barrier precautions for close contact but without a single room seems sufficient. This benefits not only the patients, but also the hospital by removing some of the strain placed on already over-stretched resources.

Supervisory Control System Architecture for Advanced Small Modular Reactors

Energy Technology Data Exchange (ETDEWEB)

Cetiner, Sacit M [ORNL; Cole, Daniel L [University of Pittsburgh; Fugate, David L [ORNL; Kisner, Roger A [ORNL; Melin, Alexander M [ORNL; Muhlheim, Michael David [ORNL; Rao, Nageswara S [ORNL; Wood, Richard Thomas [ORNL

2013-08-01

This technical report was generated as a product of the Supervisory Control for Multi-Modular SMR Plants project within the Instrumentation, Control and Human-Machine Interface technology area under the Advanced Small Modular Reactor (SMR) Research and Development Program of the U.S. Department of Energy. The report documents the definition of strategies, functional elements, and the structural architecture of a supervisory control system for multi-modular advanced SMR (AdvSMR) plants. This research activity advances the state-of-the art by incorporating decision making into the supervisory control system architectural layers through the introduction of a tiered-plant system approach. The report provides a brief history of hierarchical functional architectures and the current state-of-the-art, describes a reference AdvSMR to show the dependencies between systems, presents a hierarchical structure for supervisory control, indicates the importance of understanding trip setpoints, applies a new theoretic approach for comparing architectures, identifies cyber security controls that should be addressed early in system design, and describes ongoing work to develop system requirements and hardware/software configurations.

Designing Next Generation Massively Multithreaded Architectures for Irregular Applications

Energy Technology Data Exchange (ETDEWEB)

Tumeo, Antonino; Secchi, Simone; Villa, Oreste

2012-08-31

Irregular applications, such as data mining or graph-based computations, show unpredictable memory/network access patterns and control structures. Massively multi-threaded architectures with large node count, like the Cray XMT, have been shown to address their requirements better than commodity clusters. In this paper we present the approaches that we are currently pursuing to design future generations of these architectures. First, we introduce the Cray XMT and compare it to other multithreaded architectures. We then propose an evolution of the architecture, integrating multiple cores per node and next generation network interconnect. We advocate the use of hardware support for remote memory reference aggregation to optimize network utilization. For this evaluation we developed a highly parallel, custom simulation infrastructure for multi-threaded systems. Our simulator executes unmodified XMT binaries with very large datasets, capturing effects due to contention and hot-spotting, while predicting execution times with greater than 90% accuracy. We also discuss the FPGA prototyping approach that we are employing to study efficient support for irregular applications in next generation manycore processors.

Towards Real-Time Distributed Planning in Multi-Robot Systems

KAUST Repository

Abdelkader, Mohamed

2018-04-01

Recently, there has been an increasing interest in robotics related to multi-robot applications. Such systems can be involved in several tasks such as collaborative search and rescue, aerial transportation, surveillance, and monitoring, to name a few. There are two possible architectures for the autonomous control of multi-robot systems. In the centralized architecture, a master controller communicates with all the robots to collect information. It uses this information to make decisions for the entire system and then sends commands to each robot. In contrast, in the distributed architecture, each robot makes its own decision independent from a central authority. While distributed architecture is a more portable solution, it comes at the expense of extensive information exchange (communication). The extensive communication between robots can result in decision delays because of which distributed architecture is often impractical for systems with strict real-time constraints, e.g. when decisions have to be taken in the order of milliseconds. In this thesis, we propose a distributed framework that strikes a balance between limited communicated information and reasonable system-wide performance while running in real-time. We implement the proposed approach in a game setting of two competing teams of drones, defenders and attackers. Defending drones execute a proposed linear program algorithm (using only onboard computing modules) to obstruct attackers from infiltrating a defense zone while having minimal local message passing. Another main contribution is that we developed a realistic simulation environment as well as lab and outdoor hardware setups of customized drones for testing the system in realistic scenarios. Our software is completely open-source and fully integrated with the well-known Robot Operating System (ROS) in hopes to make our work easily reproducible and for rapid future improvements.

Electromagnetic Physics Models for Parallel Computing Architectures

International Nuclear Information System (INIS)

Amadio, G; Bianchini, C; Iope, R; Ananya, A; Apostolakis, J; Aurora, A; Bandieramonte, M; Brun, R; Carminati, F; Gheata, A; Gheata, M; Goulas, I; Nikitina, T; Bhattacharyya, A; Mohanty, A; Canal, P; Elvira, D; Jun, S Y; Lima, G; Duhem, L

2016-01-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well. (paper)

The Multi-modal Australian ScienceS Imaging and Visualisation Environment (MASSIVE high performance computing infrastructure: applications in neuroscience and neuroinformatics research

Directory of Open Access Journals (Sweden)

Wojtek James eGoscinski

2014-03-01

Full Text Available The Multi-modal Australian ScienceS Imaging and Visualisation Environment (MASSIVE is a national imaging and visualisation facility established by Monash University, the Australian Synchrotron, the Commonwealth Scientific Industrial Research Organisation (CSIRO, and the Victorian Partnership for Advanced Computing (VPAC, with funding from the National Computational Infrastructure and the Victorian Government. The MASSIVE facility provides hardware, software and expertise to drive research in the biomedical sciences, particularly advanced brain imaging research using synchrotron x-ray and infrared imaging, functional and structural magnetic resonance imaging (MRI, x-ray computer tomography (CT, electron microscopy and optical microscopy. The development of MASSIVE has been based on best practice in system integration methodologies, frameworks, and architectures. The facility has: (i integrated multiple different neuroimaging analysis software components, (ii enabled cross-platform and cross-modality integration of neuroinformatics tools, and (iii brought together neuroimaging databases and analysis workflows. MASSIVE is now operational as a nationally distributed and integrated facility for neuroinfomatics and brain imaging research.

Multi-Level and Multi-Scale Feature Aggregation Using Pretrained Convolutional Neural Networks for Music Auto-Tagging

Science.gov (United States)

Lee, Jongpil; Nam, Juhan

2017-08-01

Music auto-tagging is often handled in a similar manner to image classification by regarding the 2D audio spectrogram as image data. However, music auto-tagging is distinguished from image classification in that the tags are highly diverse and have different levels of abstractions. Considering this issue, we propose a convolutional neural networks (CNN)-based architecture that embraces multi-level and multi-scaled features. The architecture is trained in three steps. First, we conduct supervised feature learning to capture local audio features using a set of CNNs with different input sizes. Second, we extract audio features from each layer of the pre-trained convolutional networks separately and aggregate them altogether given a long audio clip. Finally, we put them into fully-connected networks and make final predictions of the tags. Our experiments show that using the combination of multi-level and multi-scale features is highly effective in music auto-tagging and the proposed method outperforms previous state-of-the-arts on the MagnaTagATune dataset and the Million Song Dataset. We further show that the proposed architecture is useful in transfer learning.

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

SLA-based optimisation of virtualised resource for multi-tier web applications in cloud data centres

Science.gov (United States)

Bi, Jing; Yuan, Haitao; Tie, Ming; Tan, Wei

2015-10-01

Dynamic virtualised resource allocation is the key to quality of service assurance for multi-tier web application services in cloud data centre. In this paper, we develop a self-management architecture of cloud data centres with virtualisation mechanism for multi-tier web application services. Based on this architecture, we establish a flexible hybrid queueing model to determine the amount of virtual machines for each tier of virtualised application service environments. Besides, we propose a non-linear constrained optimisation problem with restrictions defined in service level agreement. Furthermore, we develop a heuristic mixed optimisation algorithm to maximise the profit of cloud infrastructure providers, and to meet performance requirements from different clients as well. Finally, we compare the effectiveness of our dynamic allocation strategy with two other allocation strategies. The simulation results show that the proposed resource allocation method is efficient in improving the overall performance and reducing the resource energy cost.

A roadmap for caGrid, an enterprise Grid architecture for biomedical research.

Science.gov (United States)

Saltz, Joel; Hastings, Shannon; Langella, Stephen; Oster, Scott; Kurc, Tahsin; Payne, Philip; Ferreira, Renato; Plale, Beth; Goble, Carole; Ervin, David; Sharma, Ashish; Pan, Tony; Permar, Justin; Brezany, Peter; Siebenlist, Frank; Madduri, Ravi; Foster, Ian; Shanbhag, Krishnakant; Mead, Charlie; Chue Hong, Neil

2008-01-01

caGrid is a middleware system which combines the Grid computing, the service oriented architecture, and the model driven architecture paradigms to support development of interoperable data and analytical resources and federation of such resources in a Grid environment. The functionality provided by caGrid is an essential and integral component of the cancer Biomedical Informatics Grid (caBIG) program. This program is established by the National Cancer Institute as a nationwide effort to develop enabling informatics technologies for collaborative, multi-institutional biomedical research with the overarching goal of accelerating translational cancer research. Although the main application domain for caGrid is cancer research, the infrastructure provides a generic framework that can be employed in other biomedical research and healthcare domains. The development of caGrid is an ongoing effort, adding new functionality and improvements based on feedback and use cases from the community. This paper provides an overview of potential future architecture and tooling directions and areas of improvement for caGrid and caGrid-like systems. This summary is based on discussions at a roadmap workshop held in February with participants from biomedical research, Grid computing, and high performance computing communities.

A Framework System for Intelligent Support in Open Distributed Learning Environments--A Look Back from 16 Years Later

Science.gov (United States)

Hoppe, H. Ulrich

2016-01-01

The 1998 paper by Martin Mühlenbrock, Frank Tewissen, and myself introduced a multi-agent architecture and a component engineering approach for building open distributed learning environments to support group learning in different types of classroom settings. It took up prior work on "multiple student modeling" as a method to configure…

Access control and service-oriented architectures

NARCIS (Netherlands)

Leune, C.J.

2007-01-01

Access Control and Service-Oriented Architectures" investigates in which way logical access control can be achieved effectively, in particular in highly dynamic environments such as service-oriented architectures (SOA's). The author combines state-of-the-art best-practice and projects these onto the

Component Architectures and Web-Based Learning Environments

Science.gov (United States)

Ferdig, Richard E.; Mishra, Punya; Zhao, Yong

2004-01-01

The Web has caught the attention of many educators as an efficient communication medium and content delivery system. But we feel there is another aspect of the Web that has not been given the attention it deserves. We call this aspect of the Web its "component architecture." Briefly it means that on the Web one can develop very complex…

Communication Architecture in Mixed-Reality Simulations of Unmanned Systems.

Science.gov (United States)

Selecký, Martin; Faigl, Jan; Rollo, Milan

2018-03-14

Verification of the correct functionality of multi-vehicle systems in high-fidelity scenarios is required before any deployment of such a complex system, e.g., in missions of remote sensing or in mobile sensor networks. Mixed-reality simulations where both virtual and physical entities can coexist and interact have been shown to be beneficial for development, testing, and verification of such systems. This paper deals with the problems of designing a certain communication subsystem for such highly desirable realistic simulations. Requirements of this communication subsystem, including proper addressing, transparent routing, visibility modeling, or message management, are specified prior to designing an appropriate solution. Then, a suitable architecture of this communication subsystem is proposed together with solutions to the challenges that arise when simultaneous virtual and physical message transmissions occur. The proposed architecture can be utilized as a high-fidelity network simulator for vehicular systems with implicit mobility models that are given by real trajectories of the vehicles. The architecture has been utilized within multiple projects dealing with the development and practical deployment of multi-UAV systems, which support the architecture's viability and advantages. The provided experimental results show the achieved similarity of the communication characteristics of the fully deployed hardware setup to the setup utilizing the proposed mixed-reality architecture.

System architecture for ubiquitous live video streaming in university network environment

CSIR Research Space (South Africa)

Dludla, AG

2013-09-01

Full Text Available an architecture which supports ubiquitous live streaming for university or campus networks using a modified bluetooth inquiry mechanism with extended ID, integrated end-user device usage and adaptation to heterogeneous networks. Riding on that architecture...

IMPERA: Integrated Mission Planning for Multi-Robot Systems

Directory of Open Access Journals (Sweden)

Daniel Saur

2015-10-01

Full Text Available This paper presents the results of the project IMPERA (Integrated Mission Planning for Distributed Robot Systems. The goal of IMPERA was to realize an extraterrestrial exploration scenario using a heterogeneous multi-robot system. The main challenge was the development of a multi-robot planning and plan execution architecture. The robot team consists of three heterogeneous robots, which have to explore an unknown environment and collect lunar drill samples. The team activities are described using the language ALICA (A Language for Interactive Agents. Furthermore, we use the mission planning system pRoPhEt MAS (Reactive Planning Engine for Multi-Agent Systems to provide an intuitive interface to generate team activities. Therefore, we define the basic skills of our team with ALICA and define the desired goal states by using a logic description. Based on the skills, pRoPhEt MAS creates a valid ALICA plan, which will be executed by the team. The paper describes the basic components for communication, coordinated exploration, perception and object transportation. Finally, we evaluate the planning engine pRoPhEt MAS in the IMPERA scenario. In addition, we present further evaluation of pRoPhEt MAS in more dynamic environments.

A Hybrid Metaheuristic for Multi-Objective Scientific Workflow Scheduling in a Cloud Environment

Directory of Open Access Journals (Sweden)

Nazia Anwar

2018-03-01

Full Text Available Cloud computing has emerged as a high-performance computing environment with a large pool of abstracted, virtualized, flexible, and on-demand resources and services. Scheduling of scientific workflows in a distributed environment is a well-known NP-complete problem and therefore intractable with exact solutions. It becomes even more challenging in the cloud computing platform due to its dynamic and heterogeneous nature. The aim of this study is to optimize multi-objective scheduling of scientific workflows in a cloud computing environment based on the proposed metaheuristic-based algorithm, Hybrid Bio-inspired Metaheuristic for Multi-objective Optimization (HBMMO. The strong global exploration ability of the nature-inspired metaheuristic Symbiotic Organisms Search (SOS is enhanced by involving an efficient list-scheduling heuristic, Predict Earliest Finish Time (PEFT, in the proposed algorithm to obtain better convergence and diversity of the approximate Pareto front in terms of reduced makespan, minimized cost, and efficient load balance of the Virtual Machines (VMs. The experiments using different scientific workflow applications highlight the effectiveness, practicality, and better performance of the proposed algorithm.

A multi-agent approach to intelligent monitoring in smart grids

Science.gov (United States)

Vallejo, D.; Albusac, J.; Glez-Morcillo, C.; Castro-Schez, J. J.; Jiménez, L.

2014-04-01

In this paper, we propose a scalable multi-agent architecture to give support to smart grids, paying special attention to the intelligent monitoring of distribution substations. The data gathered by multiple sensors are used by software agents that are responsible for monitoring different aspects or events of interest, such as normal voltage values or unbalanced intensity values that can end up blowing fuses and decreasing the quality of service of end consumers. The knowledge bases of these agents have been built by means of a formal model for normality analysis that has been successfully used in other surveillance domains. The architecture facilitates the integration of new agents and can be easily configured and deployed to monitor different environments. The experiments have been conducted over a power distribution network.

Multilevel and Hybrid Architecture for Device Abstraction and Context Information Management in Smart Home Environments

Science.gov (United States)

Peláez, Víctor; González, Roberto; San Martín, Luis Ángel; Campos, Antonio; Lobato, Vanesa

Hardware device management, and context information acquisition and abstraction are key factors to develop the ambient intelligent paradigm in smart homes. This work presents an architecture that addresses these two problems and provides a usable framework to develop applications easily. In contrast to other proposals, this work addresses performance issues specifically. Results show that the execution performance of the developed prototype is suitable for deployment in a real environment. In addition, the modular design of the system allows the user to develop applications using different techniques and different levels of abstraction.

DReAM: Demand Response Architecture for Multi-level District Heating and Cooling Networks

Energy Technology Data Exchange (ETDEWEB)

Bhattacharya, Saptarshi; Chandan, Vikas; Arya, Vijay; Kar, Koushik

2017-05-19

In this paper, we exploit the inherent hierarchy of heat exchangers in District Heating and Cooling (DHC) networks and propose DReAM, a novel Demand Response (DR) architecture for Multi-level DHC networks. DReAM serves to economize system operation while still respecting comfort requirements of individual consumers. Contrary to many present day DR schemes that work on a consumer level granularity, DReAM works at a level of hierarchy above buildings, i.e. substations that supply heat to a group of buildings. This improves the overall DR scalability and reduce the computational complexity. In the first step of the proposed approach, mathematical models of individual substations and their downstream networks are abstracted into appropriately constructed low-complexity structural forms. In the second step, this abstracted information is employed by the utility to perform DR optimization that determines the optimal heat inflow to individual substations rather than buildings, in order to achieve the targeted objectives across the network. We validate the proposed DReAM framework through experimental results under different scenarios on a test network.

Development Support Environment of Business ApplicationsBased on a Multi-Grain-Size Repository

Science.gov (United States)

Terai, Koichi; Izumi, Noriaki; Yamaguchi, Takahira

In order to build the Web-based application as a shopping site on the Web, various ideas from the different viewpoints are required, such as enterprise modeling, workflow modeling, software development, and so on. From the above standpoint, this paper proposes an integrated environment to support the whole development process of analysis, design and implementation of business application. In order to reuse know-hows of various ideas in the business application development, we device a multi-grain-size repository, which consists of coarse-, middle-, and fine-grain-size repositories that correspond to the enterprise models, workflow models, and software models, respectively. We also provide a methodology that rebuilds heterogeneous information resources required for the business applications development into a multi-grain-size repository based on ontologies. The contents of the repositories are modeled by the is-a, has-a, and E-R relations, and described by the XML language. We have implemented Java-based prototype environment with the tools dealing with the multi-layered repository and confirmed that it supports us in various phases of business application development including business model manifestation, detailed business model definition and an implementation of business software applications.

CLINICAL SURFACES -- Activity-Based Computing for Distributed Multi-Display Environments in Hospitals

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Bunde-Pedersen, Jonathan; Doryab, Afsaneh

2009-01-01

A multi-display environment (MDE) is made up of co-located and networked personal and public devices that form an integrated workspace enabling co-located group work. Traditionally, MDEs have, however, mainly been designed to support a single “smart room”, and have had little sense of the tasks...

PENERAPAN ARSITEKTUR MULTI-TIER DENGAN DCOM DALAM SUATU SISTEM INFORMASI

Directory of Open Access Journals (Sweden)

Kartika Gunadi

2001-01-01

Full Text Available Information System implementation using two-tier architecture result lack in several critical issues : reuse component, scalability, maintenance, and data security. The multi-tiered client/server architecture provides a good resolution to solve these problems that using DCOM technology . The software is made by using Delphi 4 Client/Server Suite and Microsoft SQL Server V. 7.0 as a database server software. The multi-tiered application is partitioned into thirds. The first is client application which provides presentation services. The second is server application which provides application services, and the third is database server which provides database services. This multi-tiered application software can be made in two model. They are Client/Server Windows model and Client/Server Web model with ActiveX Form Technology. In this research is found that making multi-tiered architecture with using DCOM technology can provide many benefits such as, centralized application logic in middle-tier, make thin client application, distributed load of data process in several machines, increases security with the ability in hiding data, dan fast maintenance without installing database drivers in every client. Abstract in Bahasa Indonesia : Penerapan sistem informasi menggunakan two-tier architecture mempunyai banyak kelemahan : penggunaan kembali komponen, skalabilitas, perawatan, dan keamanan data. Multi-tier Client-Server architecture mempunyai kemampuan untuk memecahkan masalah ini dengan DCOM teknologi. Perangkat lunak ini dapat dibuat menggunakan Delphi 4 Client/Server Suite dan Microsoft SQL Server 7.0 sebagai perangkat lunak database. Aplikasi program multi-tier ini dibagi menjadi tiga partisi. Pertama adalah aplikasi client menyediakan presentasi servis, kedua aplikasi server menyediakan servis aplikasi, dan ketiga aplikasi database menyediakan database servis. Perangkat lunak aplikasi multi-tier ini dapat dibuat dalam dua model, yaitu client

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

ISLAMIZATION OF CONTEMPORARY ARCHITECTURE: SHIFTING THE PARADIGM OF ISLAMIC ARCHITECTURE

Directory of Open Access Journals (Sweden)

Mustapha Ben- Hamouche

2012-03-01

Full Text Available Islamic architecture is often thought as a history course and thus finds its material limited to the cataloguing and studying of legacies of successive empires or various geographic regions of the Islamic world. In practice, adherent professionals tend to reproduce high styles such as Umayyad, Abassid, Fatimid, Ottoman, etc., or recycle well known elements such as the minarets, courtyards, and mashrabiyyahs. This approach, endorsed by the present comprehensive Islamic revival, is believed to be the way to defend and revitalize the identity of Muslim societies that was initially affected by colonization and now is being offended by globalization. However, this approach often clashes with the contemporary trends in architecture that do not necessarily oppose the essence of Islamic architecture. Furthermore, it sometimes lead to an erroneous belief that consists of relating a priori forms to Islam and that clashes with the timeless and universal character of the Islamic religion. The key question to be asked then is, beyond this historicist view, what would be an “Islamic architec-ture” of nowadays that originates from the essence of Islam and that responds to contemporary conditions, needs, aspirations of present Muslim societies and individuals. To what extends can Islamic architecture bene-fits from modern progress and contemporary thought in resurrecting itself without loosing its essence. The hypothesis of the study is that, just as early Muslim architecture started from the adoption, use and re-use of early pre-Islamic architectures before reaching originality, this process, called Islamization, could also take place nowadays with the contemporary thought that is mostly developed in Western and non-Islamic environ-ments. Mechanisms in Islam that allowed the “absorption” of pre-existing civilizations should thus structure the islamization approach and serve the scholars and professionals to reach the new Islamic architecture. The

[Hygienic principles of the design of the space and architectural environment of kindergartens].

Science.gov (United States)

Stepanova, M I; Kuchma, V R

In the article there are considered current requirements for the design of the architectural environment of preschool institutions. These requirements provide conditions ofpreservation and promotion of health ofpreschool children. Among them are: the association of rooms according to a functional purpose; division of children collectives according to the age; rational placement of main rooms for the prevention ofpenetration of noise and pollution; ensuring convenientfunctional connections between different premises and group rooms and the parcel ofpreschool institutions; optimal solution of the light mode; rational air and thermal mode. There are made proposals for the expansion of the list of hygienic principles of the design of buildings of kindergartens: provision of conditions for realization of physical activity of children, the safe use of electronic educational equipment, and the creation of the barrier-free environment. There was established the insufficiency of areas of group rooms for the realization of voluntary motor activity of children in modern kindergartens and the need of the revision of the standard of the area of the group room per one child.

Brain-grounded theory of temporal and spatial design in architecture and the environment

CERN Document Server

Ando, Yoichi

2016-01-01

In this book, brain-grounded theory of temporal and spatial design in architecture and the environment is discussed. The author believes that it is a key to solving such global problems as environmental disorders and severe climate change as well as conflicts that are caused by the ill-conceived notion of “time is money”. There are three phases or aspects of a person’s life: the physical life, the spiritual or mental life, and the third stage of life, when a person moves from middle age into old age and can choose what he or she wishes to do instead of simply what must be done. This book describes the temporal design of the environment based on the theory of subjective preference, which could make it possible for an individual to realize a healthy life in all three phases. In his previously published work, the present author wrote that the theory of subjective preference has been established for the sound and visual fields based on neural evidence, and that subjective preference is an overall response o...

CisLunar Habitat Internal Architecture Design Criteria

Science.gov (United States)

Jones, R.; Kennedy, K.; Howard, R.; Whitmore, M.; Martin, C.; Garate, J.

2017-01-01

BACKGROUND: In preparation for human exploration to Mars, there is a need to define the development and test program that will validate deep space operations and systems. In that context, a Proving Grounds CisLunar habitat spacecraft is being defined as the next step towards this goal. This spacecraft will operate differently from the ISS or other spacecraft in human history. The performance envelope of this spacecraft (mass, volume, power, specifications, etc.) is being defined by the Future Capabilities Study Team. This team has recognized the need for a human-centered approach for the internal architecture of this spacecraft and has commissioned a CisLunar Phase-1 Habitat Internal Architecture Study Team to develop a NASA reference configuration, providing the Agency with a "smart buyer" approach for future acquisition. THE CISLUNAR HABITAT INTERNAL ARCHITECTURE STUDY: Overall, the CisLunar Habitat Internal Architecture study will address the most significant questions and risks in the current CisLunar architecture, habitation, and operations concept development. This effort is achieved through definition of design criteria, evaluation criteria and process, design of the CisLunar Habitat Phase-1 internal architecture, and the development and fabrication of internal architecture concepts combined with rigorous and methodical Human-in-the-Loop (HITL) evaluations and testing of the conceptual innovations in a controlled test environment. The vision of the CisLunar Habitat Internal Architecture Study is to design, build, and test a CisLunar Phase-1 Habitat Internal Architecture that will be used for habitation (e.g. habitability and human factors) evaluations. The evaluations will mature CisLunar habitat evaluation tools, guidelines, and standards, and will interface with other projects such as the Advanced Exploration Systems (AES) Program integrated Power, Avionics, Software (iPAS), and Logistics for integrated human-in-the-loop testing. The mission of the Cis

Multi-parameter decoupling and slope tracking control strategy of a large-scale high altitude environment simulation test cabin

Directory of Open Access Journals (Sweden)

Li Ke

2014-12-01

Full Text Available A large-scale high altitude environment simulation test cabin was developed to accurately control temperatures and pressures encountered at high altitudes. The system was developed to provide slope-tracking dynamic control of the temperature–pressure two-parameter and overcome the control difficulties inherent to a large inertia lag link with a complex control system which is composed of turbine refrigeration device, vacuum device and liquid nitrogen cooling device. The system includes multi-parameter decoupling of the cabin itself to avoid equipment damage of air refrigeration turbine caused by improper operation. Based on analysis of the dynamic characteristics and modeling for variations in temperature, pressure and rotation speed, an intelligent controller was implemented that includes decoupling and fuzzy arithmetic combined with an expert PID controller to control test parameters by decoupling and slope tracking control strategy. The control system employed centralized management in an open industrial ethernet architecture with an industrial computer at the core. The simulation and field debugging and running results show that this method can solve the problems of a poor anti-interference performance typical for a conventional PID and overshooting that can readily damage equipment. The steady-state characteristics meet the system requirements.

Reduced-Complexity Wireless Transceiver Architectures and Techniques for Space-Time Communications

DEFF Research Database (Denmark)

Tsakalaki, Elpiniki

2012-01-01

The dissertation sheds light on the performance gains of multi-antenna systems when the antenna aspects and the associated signal processing and coding aspects are integrated together in a multidisciplinary approach, addressing a variety of challenging tasks pertaining to the joint design of smart...... wireless transceivers and communication techniques. These tasks are at the intersection of different scientific disciplines including signal processing, communications, antennas and propagation. Specifically, the thesis deals with reduced-complexity space-time wireless transceiver architectures...... and associated communication techniques for multi-input multi-output (MIMO) and cognitive radio (CR) systems as well as wireless sensor networks (WSNs). The low-complexity architectures are obtained by equipping the wireless transceiver with passive control ports which require the minimum amount of RF hardware...

A Novel Architecture for Real-time Operation of Multi-Agent Based Coordination of Demand and Supply

International Nuclear Information System (INIS)

Hommelberg, M.P.F.; Warmer, C.J.; Kamphuis, I.G.; Kok, J.K.; Van der Velde, B.J.

2009-01-01

The ECN-developed PowerMatcher concept has proven its value in the coordination of demand and supply of electricity in different settings with respect to distributed generation and accommodation of renewable energy resources. The concept has been applied in several field tests and simulations at various levels in the power system. The agent based technology on which the PowerMatcher is built has a number of advantages above other approaches such as the flexibility of the concept to accommodate a large variety of business scenarios, the autonomy of the agents, the standardization of communication through bids and allocation, the hiding of process information, etc. Yet the field tests also have identified a number of enhancements that may lead to improved behavior of the PowerMatcher in real life circumstances. Also discussions within the power system agent community as laid down in two White Papers from the IEEE Multi-Agent Systems Working Group have convinced us to focus on an architecture that enables close cooperation with other research groups in order to gain momentum for real applications. This paper will introduce a number of requirements for the next phase of development that enable the PowerMatcher to cope with new, future scenarios. The requirements lead to a number of architectural decisions that will support a more open software development trajectory

Subjective usability of speech, touch and gesture in a heterogeneous multi-display environment

NARCIS (Netherlands)

Jong, A.P.J. de; Tak, S.; Toet, A.; Schultz, S.; Wijbenga, J.P.; Erp, J.B.F. van

2013-01-01

Several interaction techniques have been proposed to enable transfer of information between different displays in heterogeneous multi-display environments. However, it is not clear whether subjective user preference for these different techniques depends on the nature of the displays between which

Multi-agent: a technique to implement geo-visualization of networked virtual reality

Science.gov (United States)

Lin, Zhiyong; Li, Wenjing; Meng, Lingkui

2007-06-01

Networked Virtual Reality (NVR) is a system based on net connected and spatial information shared, whose demands cannot be fully meet by the existing architectures and application patterns of VR to some extent. In this paper, we propose a new architecture of NVR based on Multi-Agent framework. which includes the detailed definition of various agents and their functions and full description of the collaboration mechanism, Through the prototype system test with DEM Data and 3D Models Data, the advantages of Multi-Agent based Networked Virtual Reality System in terms of the data loading time, user response time and scene construction time etc. are verified. First, we introduce the characters of Networked Virtual Realty and the characters of Multi-Agent technique in Section 1. Then we give the architecture design of Networked Virtual Realty based on Multi-Agent in Section 2.The Section 2 content includes the rule of task division, the multi-agent architecture design to implement Networked Virtual Realty and the function of agents. Section 3 shows the prototype implementation according to the design. Finally, Section 4 discusses the benefits of using Multi-Agent to implement geovisualization of Networked Virtual Realty.

Workshop on SHAring and Reusing architectural Knowledge: (SHARK 2011)

NARCIS (Netherlands)

Avgeriou, P.; Lago, P.; Kruchten, P.; Taylor, R.N.; Gall, H.; Medvidovic, N.

2011-01-01

Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

Heavy Lift Vehicle (HLV) Avionics Flight Computing Architecture Study

Science.gov (United States)

Hodson, Robert F.; Chen, Yuan; Morgan, Dwayne R.; Butler, A. Marc; Sdhuh, Joseph M.; Petelle, Jennifer K.; Gwaltney, David A.; Coe, Lisa D.; Koelbl, Terry G.; Nguyen, Hai D.

2011-01-01

A NASA multi-Center study team was assembled from LaRC, MSFC, KSC, JSC and WFF to examine potential flight computing architectures for a Heavy Lift Vehicle (HLV) to better understand avionics drivers. The study examined Design Reference Missions (DRMs) and vehicle requirements that could impact the vehicles avionics. The study considered multiple self-checking and voting architectural variants and examined reliability, fault-tolerance, mass, power, and redundancy management impacts. Furthermore, a goal of the study was to develop the skills and tools needed to rapidly assess additional architectures should requirements or assumptions change.

The Simulation Intranet Architecture

Energy Technology Data Exchange (ETDEWEB)

Holmes, V.P.; Linebarger, J.M.; Miller, D.J.; Vandewart, R.L.

1998-12-02

The Simdarion Infranet (S1) is a term which is being used to dcscribc one element of a multidisciplinary distributed and distance computing initiative known as DisCom2 at Sandia National Laboratory (http ct al. 1998). The Simulation Intranet is an architecture for satisfying Sandia's long term goal of providing an end- to-end set of scrviccs for high fidelity full physics simu- lations in a high performance, distributed, and distance computing environment. The Intranet Architecture group was formed to apply current distributed object technologies to this problcm. For the hardware architec- tures and software models involved with the current simulation process, a CORBA-based architecture is best suited to meet Sandia's needs. This paper presents the initial desi-a and implementation of this Intranct based on a three-tier Network Computing Architecture(NCA). The major parts of the architecture include: the Web Cli- ent, the Business Objects, and Data Persistence.

Damage mapping in structural health monitoring using a multi-grid architecture

Energy Technology Data Exchange (ETDEWEB)

Mathews, V. John [Dept. of Electrical and Computer Engineering, University of Utah, Salt Lake City, UT 84112 (United States)

2015-03-31

This paper presents a multi-grid architecture for tomography-based damage mapping of composite aerospace structures. The system employs an array of piezo-electric transducers bonded on the structure. Each transducer may be used as an actuator as well as a sensor. The structure is excited sequentially using the actuators and the guided waves arriving at the sensors in response to the excitations are recorded for further analysis. The sensor signals are compared to their baseline counterparts and a damage index is computed for each actuator-sensor pair. These damage indices are then used as inputs to the tomographic reconstruction system. Preliminary damage maps are reconstructed on multiple coordinate grids defined on the structure. These grids are shifted versions of each other where the shift is a fraction of the spatial sampling interval associated with each grid. These preliminary damage maps are then combined to provide a reconstruction that is more robust to measurement noise in the sensor signals and the ill-conditioned problem formulation for single-grid algorithms. Experimental results on a composite structure with complexity that is representative of aerospace structures included in the paper demonstrate that for sufficiently high sensor densities, the algorithm of this paper is capable of providing damage detection and characterization with accuracy comparable to traditional C-scan and A-scan-based ultrasound non-destructive inspection systems quickly and without human supervision.

PICNIC Architecture.

Science.gov (United States)

Saranummi, Niilo

2005-01-01

The PICNIC architecture aims at supporting inter-enterprise integration and the facilitation of collaboration between healthcare organisations. The concept of a Regional Health Economy (RHE) is introduced to illustrate the varying nature of inter-enterprise collaboration between healthcare organisations collaborating in providing health services to citizens and patients in a regional setting. The PICNIC architecture comprises a number of PICNIC IT Services, the interfaces between them and presents a way to assemble these into a functioning Regional Health Care Network meeting the needs and concerns of its stakeholders. The PICNIC architecture is presented through a number of views relevant to different stakeholder groups. The stakeholders of the first view are national and regional health authorities and policy makers. The view describes how the architecture enables the implementation of national and regional health policies, strategies and organisational structures. The stakeholders of the second view, the service viewpoint, are the care providers, health professionals, patients and citizens. The view describes how the architecture supports and enables regional care delivery and process management including continuity of care (shared care) and citizen-centred health services. The stakeholders of the third view, the engineering view, are those that design, build and implement the RHCN. The view comprises four sub views: software engineering, IT services engineering, security and data. The proposed architecture is founded into the main stream of how distributed computing environments are evolving. The architecture is realised using the web services approach. A number of well established technology platforms and generic standards exist that can be used to implement the software components. The software components that are specified in PICNIC are implemented in Open Source.

Adjustment of the architecture to the bioclimatic conditions of the environment on case study of the monsoon modernism of architect Geoffrey Bawa

Directory of Open Access Journals (Sweden)

Danilović-Hristić Nataša

2012-01-01

Full Text Available Geoffrey Bawa (1919-2003, not well known in our ambience, was Sri Lanka's most influential architect and South Asia's leading guru of unique style, named tropical architecture. The distinction of his work is outstanding aesthetic sensitivity to site and context, especially to peculiar climatic conditions and demands. For his architectural opus he received in 2001 prestigious Aga Khan Award for Architecture, Special Chairman's Award. Although he started to engage in architecture late, in age of 38, soon he became a noted by his inventiveness in forming new canons and prototypes of modern architecture, based on traditional knowledge and perfectly fitted in local surrounding. Bawa created sustainable architecture even before the term started to be used and his masterpieces broke down the barrier between inside and outside space, designing of the interior and landscaping, reducing the building to a series of scenic spaces separated by courtyards and gardens. He is well known by his designs for private villas and hotels, but his portfolio contains public building, as schools and universities, new Sri Lanka's Parliament, sacral, office and industrial structures. Through the presentation of several projects, the paper analyzes his development path and basic characteristics of so called 'monsoon modernism' and special relationship to the bioclimatic conditions of the environment.

Exascale Co-design for Modeling Materials in Extreme Environments

Energy Technology Data Exchange (ETDEWEB)

Germann, Timothy C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-07-08

Computational materials science has provided great insight into the response of materials under extreme conditions that are difficult to probe experimentally. For example, shock-induced plasticity and phase transformation processes in single-crystal and nanocrystalline metals have been widely studied via large-scale molecular dynamics simulations, and many of these predictions are beginning to be tested at advanced 4th generation light sources such as the Advanced Photon Source (APS) and Linac Coherent Light Source (LCLS). I will describe our simulation predictions and their recent verification at LCLS, outstanding challenges in modeling the response of materials to extreme mechanical and radiation environments, and our efforts to tackle these as part of the multi-institutional, multi-disciplinary Exascale Co-design Center for Materials in Extreme Environments (ExMatEx). ExMatEx has initiated an early and deep collaboration between domain (computational materials) scientists, applied mathematicians, computer scientists, and hardware architects, in order to establish the relationships between algorithms, software stacks, and architectures needed to enable exascale-ready materials science application codes within the next decade. We anticipate that we will be able to exploit hierarchical, heterogeneous architectures to achieve more realistic large-scale simulations with adaptive physics refinement, and are using tractable application scale-bridging proxy application testbeds to assess new approaches and requirements. Such current scale-bridging strategies accumulate (or recompute) a distributed response database from fine-scale calculations, in a top-down rather than bottom-up multiscale approach.

A Conceptual Framework of Immersive Shared Environments Emphasizing Social Interaction

Directory of Open Access Journals (Sweden)

Mi Jeong Kim

2015-11-01

Full Text Available The effectiveness of visual displays has often been linked to the sense of presence embodied by immersive visualization. However, efforts analyzing how presence is associated with multi-users’ quality of communication, including visualization capabilities to assist in architecture, engineering and construction (AEC, are still unfolding. This research is an exploratory study on social interaction, which aims to improve the presentation and communication of complex data through immersive simulation techniques. This paper reviews key concepts such as presence and immersion to identify factors that influence communication in the representative literature. It then introduces the Hub for Immersive Visualization and eResearch (HIVE with a focus on the technological components. Finally it presents a conceptual framework of immersive shared environment, which enables multi-users to understand how to implement social interaction in a system efficiently or to determine whether a visualization system could support communication effectively. Future studies to validate the proposed framework are discussed, particularly in the context of cognitive factors in a shared environment.

Modelling customer behaviour in multi-channel service distribution

NARCIS (Netherlands)

Heinhuis, D.; de Vries, E.J.; Kundisch, D.; Veit, D.J.; Weitzel, T.; Weinhardt, C.

2009-01-01

Financial service providers are innovating their distribution strategy into multi-channel strategies. The success of a multi-channel approach and the high investments made in information systems and enterprise architectures depends on the adoption and multi-channel usage behaviour of consumers. We

A hybrid Multi Agent System architecture for distributed supervision of chronic patients in the eHealth setting

NARCIS (Netherlands)

Blanson Henkemans, O.A.; Bonacina, S.; Cappiello, N.; Mast, C.A.P.G. van der; Neerincx, M.A.; Pinciroli, F.

2007-01-01

eHealth, the use of Information and Communication Technology (ICT) in the health sector, enhances today's health care environment. In particular, the use of Multi Agent System (MAS) technology, an aspect of ICT, can further contribute to the improvement of health care. Exceptional integration of

Lessons Learned while Exploring Cloud-Native Architectures for NASA EOSDIS Applications and Systems

Science.gov (United States)

Pilone, D.

2016-12-01

As new, high data rate missions begin collecting data, the NASA's Earth Observing System Data and Information System (EOSDIS) archive is projected to grow roughly 20x to over 300PBs by 2025. To prepare for the dramatic increase in data and enable broad scientific inquiry into larger time series and datasets, NASA has been exploring the impact of applying cloud technologies throughout EOSDIS. In this talk we will provide an overview of NASA's prototyping and lessons learned in applying cloud architectures to: Highly scalable and extensible ingest and archive of EOSDIS data Going "all-in" on cloud based application architectures including "serverless" data processing pipelines and evaluating approaches to vendor-lock in Rethinking data distribution and approaches to analysis in a cloud environment Incorporating and enforcing security controls while minimizing the barrier for research efforts to deploy to NASA compliant, operational environments. NASA's Earth Observing System (EOS) is a coordinated series of satellites for long term global observations. NASA's Earth Observing System Data and Information System (EOSDIS) is a multi-petabyte-scale archive of environmental data that supports global climate change research by providing end-to-end services from EOS instrument data collection to science data processing to full access to EOS and other earth science data. On a daily basis, the EOSDIS ingests, processes, archives and distributes over 3 terabytes of data from NASA's Earth Science missions representing over 6000 data products ranging from various types of science disciplines. EOSDIS has continually evolved to improve the discoverability, accessibility, and usability of high-impact NASA data spanning the multi-petabyte-scale archive of Earth science data products.

A data fusion environment for multimodal and multi-informational neuronavigation.

Science.gov (United States)

Jannin, P; Fleig, O J; Seigneuret, E; Grova, C; Morandi, X; Scarabin, J M

2000-01-01

Part of the planning and performance of neurosurgery consists of determining target areas, areas to be avoided, landmark areas, and trajectories, all of which are components of the surgical script. Nowadays, neurosurgeons have access to multimodal medical imaging to support the definition of the surgical script. The purpose of this paper is to present a software environment developed by the authors that allows full multimodal and multi-informational planning as well as neuronavigation for epilepsy and tumor surgery. We have developed a data fusion environment dedicated to neuronavigation around the Surgical Microscope Neuronavigator system (Carl Zeiss, Oberkochen, Germany). This environment includes registration, segmentation, 3D visualization, and interaction-applied tools. It provides the neuronavigation system with the multimodal information involved in the definition of the surgical script: lesional areas, sulci, ventricles segmented from magnetic resonance imaging (MRI), vessels segmented from magnetic resonance angiography (MRA), functional areas from magneto-encephalography (MEG), and functional magnetic resonance imaging (fMRI) for somatosensory, motor, or language activation. These data are considered to be relevant for the performance of the surgical procedure. The definition of each entity results from the same procedure: registration to the anatomical MRI data set (defined as the reference data set), segmentation, fused 3D display, selection of the relevant entities for the surgical step, encoding in 3D surface-based representation, and storage of the 3D surfaces in a file recognized by the neuronavigation software (STP 3.4, Leibinger; Freiburg, Germany). Multimodal neuronavigation is illustrated with two clinical cases for which multimodal information was introduced into the neuronavigation system. Lesional areas were used to define and follow the surgical path, sulci and vessels helped identify the anatomical environment of the surgical field, and

An Enhanced Multi-Pager Environment Support for Second Generation Microkernels

OpenAIRE

Klimiankou, Yauhen

2014-01-01

The main objective of this paper is to present a mechanism of enhanced paging support for the second generation microkernels in the form of explicit support of multi-pager environment for the tasks running in the system. Proposed mechanism is based on the intra-kernel high granularity pagers assignments per virtual address space, which allow efficient and simple dispatching of page faults to the appropriate pagers. The paging is one of the major features of the virtual memory, which is extens...

Migrating to Cloud-Native Architectures Using Microservices: An Experience Report

OpenAIRE

Balalaie, Armin; Heydarnoori, Abbas; Jamshidi, Pooyan

2015-01-01

Migration to the cloud has been a popular topic in industry and academia in recent years. Despite many benefits that the cloud presents, such as high availability and scalability, most of the on-premise application architectures are not ready to fully exploit the benefits of this environment, and adapting them to this environment is a non-trivial task. Microservices have appeared recently as novel architectural styles that are native to the cloud. These cloud-native architectures can facilita...

MASM: a market architecture for sensor management in distributed sensor networks

Science.gov (United States)

Viswanath, Avasarala; Mullen, Tracy; Hall, David; Garga, Amulya

2005-03-01

Rapid developments in sensor technology and its applications have energized research efforts towards devising a firm theoretical foundation for sensor management. Ubiquitous sensing, wide bandwidth communications and distributed processing provide both opportunities and challenges for sensor and process control and optimization. Traditional optimization techniques do not have the ability to simultaneously consider the wildly non-commensurate measures involved in sensor management in a single optimization routine. Market-oriented programming provides a valuable and principled paradigm to designing systems to solve this dynamic and distributed resource allocation problem. We have modeled the sensor management scenario as a competitive market, wherein the sensor manager holds a combinatorial auction to sell the various items produced by the sensors and the communication channels. However, standard auction mechanisms have been found not to be directly applicable to the sensor management domain. For this purpose, we have developed a specialized market architecture MASM (Market architecture for Sensor Management). In MASM, the mission manager is responsible for deciding task allocations to the consumers and their corresponding budgets and the sensor manager is responsible for resource allocation to the various consumers. In addition to having a modified combinatorial winner determination algorithm, MASM has specialized sensor network modules that address commensurability issues between consumers and producers in the sensor network domain. A preliminary multi-sensor, multi-target simulation environment has been implemented to test the performance of the proposed system. MASM outperformed the information theoretic sensor manager in meeting the mission objectives in the simulation experiments.

SoS Notebook: An Interactive Multi-Language Data Analysis Environment.

Science.gov (United States)

Peng, Bo; Wang, Gao; Ma, Jun; Leong, Man Chong; Wakefield, Chris; Melott, James; Chiu, Yulun; Du, Di; Weinstein, John N

2018-05-22

Complex bioinformatic data analysis workflows involving multiple scripts in different languages can be difficult to consolidate, share, and reproduce. An environment that streamlines the entire processes of data collection, analysis, visualization and reporting of such multi-language analyses is currently lacking. We developed Script of Scripts (SoS) Notebook, a web-based notebook environment that allows the use of multiple scripting language in a single notebook, with data flowing freely within and across languages. SoS Notebook enables researchers to perform sophisticated bioinformatic analysis using the most suitable tools for different parts of the workflow, without the limitations of a particular language or complications of cross-language communications. SoS Notebook is hosted at http://vatlab.github.io/SoS/ and is distributed under a BSD license. bpeng@mdanderson.org.

A basic system architecture for sensor data diffusion of environment sensors for intelligent cruise control systems; Eine Basis-Systemarchitektur zur Sensordatenfusion von Umfeldsensoren fuer Fahrerassistenzsysteme

Energy Technology Data Exchange (ETDEWEB)

Darms, M.

2007-07-01

The design of the system architecture for sensor data diffusion at the beginning of the development process has significant influence on the cost. With a view to intelligent cruise control systems, the author investigated general assumptions concerning data association and data filtering for sensor data diffusion of environment sensors which must be considered when designing an architecture or may be considered for optimisation. The validity of the assumption is illustrated by simulations of adaptive speed control and time-to-collision calculations as well as on the basis of available literature. A basic sytem architecture is presented as a precursor of the final architecture which is based on these assumptions. Their applicability is proved by implementation in the PRORETA project. The author's work provides a validated basis for architects of a serial system architecture enabling them to design and implement their ultimate systems. (orig.)

DiFX: A software correlator for very long baseline interferometry using multi-processor computing environments

OpenAIRE

Deller, A. T.; Tingay, S. J.; Bailes, M.; West, C.

2007-01-01

We describe the development of an FX style correlator for Very Long Baseline Interferometry (VLBI), implemented in software and intended to run in multi-processor computing environments, such as large clusters of commodity machines (Beowulf clusters) or computers specifically designed for high performance computing, such as multi-processor shared-memory machines. We outline the scientific and practical benefits for VLBI correlation, these chiefly being due to the inherent flexibility of softw...

Evolution of bow-tie architectures in biology.

Directory of Open Access Journals (Sweden)

Tamar Friedlander

2015-03-01

Full Text Available Bow-tie or hourglass structure is a common architectural feature found in many biological systems. A bow-tie in a multi-layered structure occurs when intermediate layers have much fewer components than the input and output layers. Examples include metabolism where a handful of building blocks mediate between multiple input nutrients and multiple output biomass components, and signaling networks where information from numerous receptor types passes through a small set of signaling pathways to regulate multiple output genes. Little is known, however, about how bow-tie architectures evolve. Here, we address the evolution of bow-tie architectures using simulations of multi-layered systems evolving to fulfill a given input-output goal. We find that bow-ties spontaneously evolve when the information in the evolutionary goal can be compressed. Mathematically speaking, bow-ties evolve when the rank of the input-output matrix describing the evolutionary goal is deficient. The maximal compression possible (the rank of the goal determines the size of the narrowest part of the network-that is the bow-tie. A further requirement is that a process is active to reduce the number of links in the network, such as product-rule mutations, otherwise a non-bow-tie solution is found in the evolutionary simulations. This offers a mechanism to understand a common architectural principle of biological systems, and a way to quantitate the effective rank of the goals under which they evolved.

An integrated command and control architecture concept for unmanned systems in the year 2030

OpenAIRE

Johnson, Jamarr J.; Buckley, Omari D.; Cunningham, Dustin; Matthews, Adam; Quincy, Keith E.; Fontenot, Dion G.; Moran, Michael G.; Tham, Gabriel; Wong, Jason; Quah, Raymond; Chia, Tommy; Costica, Yionon; Gho, Delvin; Seet, Henry; Ang, Teo Hong

2010-01-01

Approved for public release; distribution is unlimited. U.S. Forces require an integrated Command and Control Architecture that enables operations of a dynamic mix of manned and unmanned systems. The level of autonomous behavior correlates to: 1) the amount of trust with the reporting vehicles, and 2) the multi-spectral perspective of the observations. The intent to illuminate the architectural issues for force protection in 2030 was based on a multi-phased analytical model of High Value ...

Sustainable Architecture in the Context of Regional Activities

Science.gov (United States)

Sołkeiewicz-Kos, Nina

2017-10-01

The relationship between man and the surrounding cultural environment directs attention in urban and architectural design to the realm of interdisciplinary research. As a result, they should create architectural and urban solutions which provide aesthetic satisfaction. They should also generate social bonds, a sense of identity and maintain the specificity of the local building environment, where tradition and the context of surroundings is the starting point for creating a sustainable living environment. Presented problems focus on the analysis of formal, functional and spatial solutions, in which materials and technology were selected in an optimal way. The continuation of the subject concerns the relationship between the use of the local urban, architectural, material and technological solutions and the quality of the cultural space that meets the principles of sustainable development. Adaptation and transformation of old techniques and traditional materials to create contemporary designs is one of the forms of experimentation encountered in contemporary architecture. Its economic, social and ecological aspects are realised in the form of: satisfying the needs of the local community, renewal and maintenance of modern standards of the surrounding buildings, use of local materials and available space. This means striving to design and transform the space already in use, while reducing the impact on the environment. Analysed buildings and urban spaces are an attempt to answer: whether the strategies applied in the field of architectural, technological and material solutions provide the identification of the place and meet the users’ expectations?

Distributed optimization-based control of multi-agent networks in complex environments

CERN Document Server

Zhu, Minghui

2015-01-01

This book offers a concise and in-depth exposition of specific algorithmic solutions for distributed optimization based control of multi-agent networks and their performance analysis. It synthesizes and analyzes distributed strategies for three collaborative tasks: distributed cooperative optimization, mobile sensor deployment and multi-vehicle formation control. The book integrates miscellaneous ideas and tools from dynamic systems, control theory, graph theory, optimization, game theory and Markov chains to address the particular challenges introduced by such complexities in the environment as topological dynamics, environmental uncertainties, and potential cyber-attack by human adversaries. The book is written for first- or second-year graduate students in a variety of engineering disciplines, including control, robotics, decision-making, optimization and algorithms and with backgrounds in aerospace engineering, computer science, electrical engineering, mechanical engineering and operations research. Resea...

Analysis and synthesis of multi-qubit, multi-mode quantum devices

Energy Technology Data Exchange (ETDEWEB)

Solgun, Firat

2015-03-27

In this thesis we propose new methods in multi-qubit multi-mode circuit quantum electrodynamics (circuit-QED) architectures. First we describe a direct parity measurement method for three qubits, which can be realized in 2D circuit-QED with a possible extension to four qubits in a 3D circuit-QED setup for the implementation of the surface code. In Chapter 3 we show how to derive Hamiltonians and compute relaxation rates of the multi-mode superconducting microwave circuits consisting of single Josephson junctions using an exact impedance synthesis technique (the Brune synthesis) and applying previous formalisms for lumped element circuit quantization. In the rest of the thesis we extend our method to multi-junction (multi-qubit) multi-mode circuits through the use of state-space descriptions which allows us to quantize any multiport microwave superconducting circuit with a reciprocal lossy impedance response.

Playing the Indicator Game : Reflections on Strategies to Position an STS Group in a Multi-disciplinary Environment

NARCIS (Netherlands)

R.A. Bal (Roland)

2017-01-01

markdownabstractRoland Bal analyzes the strategies his research group developed to deal with the interlinked dynamics of research evaluation in a multi-disciplinary institutional environment characteristic of much STS research. Scholars in such environments constantly need to navigate and

Georgian Dublin : architecture and the built environment

OpenAIRE

Lucey, Conor

2010-01-01

This paper reports on the digitisation and cataloguing of photographic slides of Dublin’s Georgian architecture which was conducted as part of the UCD Irish Virtual Research Library and Archive (IVRLA) series of demonstrator research projects. The UCD School of Art History and Cultural Policy have a library of photographic slides taken between 1978 and 2005. While these had previously been used for School teaching purposes only, they were long recognized as a potentially significant resource ...

Robust Architectures for Complex Multi-Agent Heterogeneous Systems

Science.gov (United States)

2014-07-23

cooperative trajectory generation framework with account of spatial and temporal constraints [2], and iii) developing a decoupled architecture for...in the presence of dynamic information flow and quantized measurements [1], ii) developing a cooperative trajectory generation framework with account ... CIE 2013, Portland, OR, DETC2013-12744, 2013 (one of the five finalists for “best student paper award”). 8. R. Choe, V. Cichella, E. Xargay, N

Communication Architecture in Mixed-Reality Simulations of Unmanned Systems

Directory of Open Access Journals (Sweden)

Martin Selecký

2018-03-01

Full Text Available Verification of the correct functionality of multi-vehicle systems in high-fidelity scenarios is required before any deployment of such a complex system, e.g., in missions of remote sensing or in mobile sensor networks. Mixed-reality simulations where both virtual and physical entities can coexist and interact have been shown to be beneficial for development, testing, and verification of such systems. This paper deals with the problems of designing a certain communication subsystem for such highly desirable realistic simulations. Requirements of this communication subsystem, including proper addressing, transparent routing, visibility modeling, or message management, are specified prior to designing an appropriate solution. Then, a suitable architecture of this communication subsystem is proposed together with solutions to the challenges that arise when simultaneous virtual and physical message transmissions occur. The proposed architecture can be utilized as a high-fidelity network simulator for vehicular systems with implicit mobility models that are given by real trajectories of the vehicles. The architecture has been utilized within multiple projects dealing with the development and practical deployment of multi-UAV systems, which support the architecture’s viability and advantages. The provided experimental results show the achieved similarity of the communication characteristics of the fully deployed hardware setup to the setup utilizing the proposed mixed-reality architecture.

Achieving thermal comfort and sustainable urban development in accordance with the principles of bioclimatic architecture: A case study of Ulcinj (Montenegro)

OpenAIRE

Bajçinovci Bujar

2017-01-01

Human communities have always taken actions to create a healthier environment for living and working. Those efforts are best documented in the architectural structure everywhere, starting from ancient history to the present. It is assumed that the town of Ulcinj is one of the earliest cities on the Adriatic coast. The building morphology and urban structure of Ulcinj is 2,500 years old and is continued by multi-ethnical society. Hence, the urban structure of Ulcinj developed harmonically acro...

The role of crown architecture for light harvesting and carbon gain in extreme light environments assessed with a structurally realistic 3-D model

Directory of Open Access Journals (Sweden)

Valladares, Fernando

2000-06-01

Full Text Available Main results from different studies of crown architecture adaptation to extreme light environments are presented. Light capture and carbon gain by plants from low (forest understory and high (open Mediterranean-type ecosystems light environments were simulated with a 3-D model (YPLANT, which was developed specifically to analyse the structural features that determine light interception and photosynthesis at the whole plant level. Distantly related taxa with contrasting architectures exhibited similar efficiencies of light interception (functional convergence. Between habitats large differences in architecture existed depending on whether light capture must be maximised or whether excess photon flux density must be avoided. These differences are realised both at the species level and within a species because of plastic adjustments of crown architecture to the external light environment. Realistic, 3-D architectural models are indispensable tools in this kind of comparative studies due to the intrinsic complexity of plant architecture. Their efficient development requires a fluid exchange of ideas between botanists, ecologists and plant modellers.Se presentan los resultados principales de varios estudios sobre las adaptaciones del follaje a ambientes lumínicos extremos. Plantas de ambientes oscuros (sotobosques de bosques templados y tropicales y de ambientes muy luminosos (ecosistemas abiertos de tipo Mediterráneo han sido estudiadas mediante un modelo (YPLANT que permite la reconstrucción tridimensional de la parte aérea de las plantas e identificar los rasgos estructurales que determinan la interceptación de luz y la fotosíntesis y transpiraci6n potencial a nivel de toda la copa. Taxones no relacionados y con arquitecturas muy diferentes mostraron una eficiencia en la interceptaci6n de luz similar (convergencia funcional. La comparación entre hábitat revelo grandes diferencias arquitecturales dependiendo de si la absorción de luz deb

Architectural switches in plant thylakoid membranes.

Science.gov (United States)

Kirchhoff, Helmut

2013-10-01

Recent progress in elucidating the structure of higher plants photosynthetic membranes provides a wealth of information. It allows generation of architectural models that reveal well-organized and complex arrangements not only on whole membrane level, but also on the supramolecular level. These arrangements are not static but highly responsive to the environment. Knowledge about the interdependency between dynamic structural features of the photosynthetic machinery and the functionality of energy conversion is central to understanding the plasticity of photosynthesis in an ever-changing environment. This review summarizes the architectural switches that are realized in thylakoid membranes of green plants.

Blue Guardian: open architecture intelligence, surveillance, and reconnaissance (ISR) demonstrations

Science.gov (United States)

Shirey, Russell G.; Borntrager, Luke A.; Soine, Andrew T.; Green, David M.

2017-04-01

The Air Force Research Laboratory (AFRL) - Sensors Directorate has developed the Blue Guardian program to demonstrate advanced sensing technology utilizing open architectures in operationally relevant environments. Blue Guardian has adopted the core concepts and principles of the Air Force Rapid Capabilities Office (AFRCO) Open Mission Systems (OMS) initiative to implement an open Intelligence, Surveillance and Reconnaissance (ISR) platform architecture. Using this new OMS standard provides a business case to reduce cost and program schedules for industry and the Department of Defense (DoD). Blue Guardian is an early adopting program of OMS and provides much needed science and technology improvements, development, testing, and implementation of OMS for ISR purposes. This paper presents results and lessons learned under the Blue Guardian Project Shepherd program which conducted Multi-INT operational demonstrations in the Joint Interagency Task Force - South (JIATF-S) and USSOUTHCOM area of operations in early 2016. Further, on-going research is discussed to enhance Blue Guardian Multi-INT ISR capabilities to support additional mission sets and platforms, including unmanned operations over line of sight (LOS) and beyond line of sight (BLOS) datalinks. An implementation of additional OMS message sets and services to support off-platform sensor command and control using OMS/UCI data structures and dissemination of sensor product data/metadata is explored. Lastly, the Blue Guardian team is working with the AgilePod program to use OMS in a full Government Data Rights Pod to rapidly swap these sensors to different aircraft. The union of the AgilePod (which uses SOSA compliant standards) and OMS technologies under Blue Guardian programs is discussed.

The Control Based on Internal Average Kinetic Energy in Complex Environment for Multi-robot System

Science.gov (United States)

Yang, Mao; Tian, Yantao; Yin, Xianghua

In this paper, reference trajectory is designed according to minimum energy consumed for multi-robot system, which nonlinear programming and cubic spline interpolation are adopted. The control strategy is composed of two levels, which lower-level is simple PD control and the upper-level is based on the internal average kinetic energy for multi-robot system in the complex environment with velocity damping. Simulation tests verify the effectiveness of this control strategy.

Spatial Layout of Multi-Environment Test Sites: A Case Study of Maize in Jilin Province

Directory of Open Access Journals (Sweden)

Zuliang Zhao

2018-05-01

Full Text Available Variety regional tests based on multiple environments play a critical role in understanding the high yield and adaptability of new crop varieties. However, the current approach mainly depends on experience from breeding experts and is difficulty to promote because of inconsistency between testing and actual situation. We propose a spatial layout method based on the existing systematic regional test network. First, the method of spatial clustering was used to cluster the planting environment. Then, we used spatial stratified sampling to determine the minimum number of test sites in each type of environment. Finally, combined with the factors such as the convenience of transportation and the planting area, we used spatial balance sampling to generate the layout of multi-environment test sites. We present a case study for maize in Jilin Province and show the utility of the method with an accuracy of about 94.5%. The experimental results showed that 66.7% of sites are located in the same county and the unbalanced layout of original sites is improved. Furthermore, we conclude that the set of operational technical ideas for carrying out the layout of multi-environment test sites based on crop varieties in this paper can be applied to future research.

A supportive architecture for CFD-based design optimisation

Science.gov (United States)

Li, Ni; Su, Zeya; Bi, Zhuming; Tian, Chao; Ren, Zhiming; Gong, Guanghong

2014-03-01

Multi-disciplinary design optimisation (MDO) is one of critical methodologies to the implementation of enterprise systems (ES). MDO requiring the analysis of fluid dynamics raises a special challenge due to its extremely intensive computation. The rapid development of computational fluid dynamic (CFD) technique has caused a rise of its applications in various fields. Especially for the exterior designs of vehicles, CFD has become one of the three main design tools comparable to analytical approaches and wind tunnel experiments. CFD-based design optimisation is an effective way to achieve the desired performance under the given constraints. However, due to the complexity of CFD, integrating with CFD analysis in an intelligent optimisation algorithm is not straightforward. It is a challenge to solve a CFD-based design problem, which is usually with high dimensions, and multiple objectives and constraints. It is desirable to have an integrated architecture for CFD-based design optimisation. However, our review on existing works has found that very few researchers have studied on the assistive tools to facilitate CFD-based design optimisation. In the paper, a multi-layer architecture and a general procedure are proposed to integrate different CFD toolsets with intelligent optimisation algorithms, parallel computing technique and other techniques for efficient computation. In the proposed architecture, the integration is performed either at the code level or data level to fully utilise the capabilities of different assistive tools. Two intelligent algorithms are developed and embedded with parallel computing. These algorithms, together with the supportive architecture, lay a solid foundation for various applications of CFD-based design optimisation. To illustrate the effectiveness of the proposed architecture and algorithms, the case studies on aerodynamic shape design of a hypersonic cruising vehicle are provided, and the result has shown that the proposed architecture

An Architectural Framework for Integrating COTS/GOTS/Legacy Systems

National Research Council Canada - National Science Library

Gee, Karen

2000-01-01

.... To fully realize the DoD's goal, a new architectural framework is needed. This thesis proposes an architectural framework suitable for integrating COTS/GOTS/legacy systems in a distributed, heterogeneous environment...

VERNACULAR ARCHITECTURE: AN INTRODUCTORY COURSE TO LEARN ARCHITECTURE IN INDIA

Directory of Open Access Journals (Sweden)

Miki Desai

2010-07-01

Full Text Available “The object in view of both my predecessors in office and by myself has been rather to bring out the reasoning powers of individual students, so that they may understand the inner meaning of the old forms and their original function and may develop and modernize and gradually produce an architecture, Indian in character, but at the same time as suited to present day India as the old styles were to their own times and environment.” Claude Batley-1940; Lang, Desai, Desai, 1997 (p.143. The article introduces teaching philosophy, content and method of Basic Design I and II for first year students of architecture at the Faculty of Architecture, Centre for Environmental Planning and Technology (CEPT University, Ahmedabad, India. It is framed within the Indian perspective of architectural education from the British colonial times. Commencing with important academic literature and biases of the initial colonial period, it quickly traces architectural education in CEPT, the sixteenth school of post-independent India, set up in 1962, discussing the foundation year teaching imparted. The school was Modernist and avant-garde. The author introduced these two courses against the back drop of the Universalist Modernist credo of architecture and education. In the courses, the primary philosophy behind learning design emerges from heuristic method. The aim of the first course is seen as infusing interest in visual world, development of manual skills and dexterity through the dictum of ‘Look-feel-reason out-evaluate’ and ‘observe-record-interpret-synthesize transform express’. Due to the lack of architectural orientation in Indian schooling; the second course assumes vernacular architecture as a reasonable tool for a novice to understand the triangular relationship of society, architecture and physical context and its impact on design. The students are analytically exposed to the regional variety of architectures logically stemming from the geo

A Composite Agent Architecture for Multi-Agent Simulations

OpenAIRE

VanPutte, Michael; Osborn, Brian; Hiles, John

2002-01-01

CGF Computer Generated Forces and Behavioral Representation The MOVES Institute’s Computer-Generated Autonomy Group has focused on a research goal of modeling complex and adaptive behavior while at the same time making the behavior easier to create and control. This research has led to several techniques for agent construction, that includes a social and organization relationship management engine, a composite agent architecture, an agent goal apparatus, a structure for capturi...

A minimal architecture for joint action

DEFF Research Database (Denmark)

Vesper, Cordula; Butterfill, Stephen; Knoblich, Günther

2010-01-01

What kinds of processes and representations make joint action possible? In this paper we suggest a minimal architecture for joint action that focuses on representations, action monitoring and action prediction processes, as well as ways of simplifying coordination. The architecture spells out...... minimal requirements for an individual agent to engage in a joint action. We discuss existing evidence in support of the architecture as well as open questions that remain to be empirically addressed. In addition, we suggest possible interfaces between the minimal architecture and other approaches...... to joint action. The minimal architecture has implications for theorizing about the emergence of joint action, for human-machine interaction, and for understanding how coordination can be facilitated by exploiting relations between multiple agents’ actions and between actions and the environment....

Beyond Relational: A Database Architecture and Federated Query Optimization in a Multi-Modal Healthcare Environment

Science.gov (United States)

Hylock, Ray Hales

2013-01-01

Over the past thirty years, clinical research has benefited substantially from the adoption of electronic medical record systems. As deployment has increased, so too has the number of researchers seeking to improve the overall analytical environment by way of tools and models. Although much work has been done, there are still many uninvestigated…

Architecture at Hydro-Quebec

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

Architecture at Hydro-Quebec is concerned not only with combining function and aesthetics in designing buildings and other structures for an electrical utility, but also to satisfy technical and administrative needs and to help solve contemporary problems such as the rational use of energy. Examples are presented of Hydro-Quebec's architectural accomplishments in the design of hydroelectric power stations and their surrounding landscapes, thermal power stations, transmission substations, research and testing facilities, and administrative buildings. It is shown how some buildings are designed to adapt to local environments and to conserve energy. The utility's policy of conserving installations of historic value, such as certain pre-1930 power stations, is illustrated, and aspects of its general architectural policy are outlined. 20 figs.

Web Service Architecture for e-Learning

Directory of Open Access Journals (Sweden)

Xiaohong Qiu

2005-10-01

Full Text Available Message-based Web Service architecture provides a unified approach to applications and Web Services that incorporates the flexibility of messaging and distributed components. We propose SMMV and MMMV collaboration as the general architecture of collaboration based on a Web service model, which accommodates both instructor-led learning and participatory learning. This approach derives from our message-based Model-View-Controller (M-MVC architecture of Web applications, comprises an event-driven Publish/Subscribe scheme, and provides effective collaboration with high interactivity of rich Web content for diverse clients over heterogeneous network environments.

Future internet architecture and cloud ecosystem: A survey

Science.gov (United States)

Wan, Man; Yin, Shiqun

2018-04-01

The Internet has gradually become a social infrastructure, the existing TCP/IP architecture faces many challenges. So future Internet architecture become hot research. This paper introduces two ways of idea about the future research of Internet structure system, probes into the future Internet architecture and the environment of cloud ecosystem. Finally, we focuses the related research, and discuss basic principles and problems of OpenStack.

Artificial intelligent e-learning architecture

Science.gov (United States)

Alharbi, Mafawez; Jemmali, Mahdi

2017-03-01

Many institutions and university has forced to use e learning, due to its ability to provide additional and flexible solutions for students and researchers. E-learning In the last decade have transported about the extreme changes in the distribution of education allowing learners to access multimedia course material at any time, from anywhere to suit their specific needs. In the form of e learning, instructors and learners live in different places and they do not engage in a classroom environment, but within virtual universe. Many researches have defined e learning based on their objectives. Therefore, there are small number of e-learning architecture have proposed in the literature. However, the proposed architecture has lack of embedding intelligent system in the architecture of e learning. This research argues that unexplored potential remains, as there is scope for e learning to be intelligent system. This research proposes e-learning architecture that incorporates intelligent system. There are intelligence components, which built into the architecture.

Dynamic configuration management of a multi-standard and multi-mode reconfigurable multi-ASIP architecture for turbo decoding

Science.gov (United States)

Lapotre, Vianney; Gogniat, Guy; Baghdadi, Amer; Diguet, Jean-Philippe

2017-12-01

The multiplication of connected devices goes along with a large variety of applications and traffic types needing diverse requirements. Accompanying this connectivity evolution, the last years have seen considerable evolutions of wireless communication standards in the domain of mobile telephone networks, local/wide wireless area networks, and Digital Video Broadcasting (DVB). In this context, intensive research has been conducted to provide flexible turbo decoder targeting high throughput, multi-mode, multi-standard, and power consumption efficiency. However, flexible turbo decoder implementations have not often considered dynamic reconfiguration issues in this context that requires high speed configuration switching. Starting from this assessment, this paper proposes the first solution that allows frame-by-frame run-time configuration management of a multi-processor turbo decoder without compromising the decoding performances.

Corrosion behaviour in saline environments of single-layer titanium and aluminium coatings, and of Ti/Al alternated multi-layers elaborated by a multi-beam PVD technique

International Nuclear Information System (INIS)

Merati, Abdenacer

1994-01-01

This research thesis reports the characterization of anti-corrosion titanium and aluminium coatings deposited on a 35CD4 steel under the form of mono-metallic layers or alternated Ti/Al multi-layers, and obtained by a multibeam PVD technique. The influence of different parameters is studied: single-layer thickness (5, 15 or 30 micro-metres), multi-layer distribution (5 to 6) and substrate (smooth or threaded). Layer nature and microstructure are studied by optical microscopy and scanning electron microscopy (SEM), as well as corrosion toughness in aqueous saline environments. Coated threaded samples have been studied after tightening tests. It appears that titanium layers are denser and more uniform than aluminium layers, and that multi-layer coatings provide a better protection than single-layer coatings. The best behaviour is obtained when titanium is in contact with steel, and aluminium is the outer layer in contact with the corroding environment [fr

Communication and Memory Architecture Design of Application-Specific High-End Multiprocessors

Directory of Open Access Journals (Sweden)

Yahya Jan

2012-01-01

Full Text Available This paper is devoted to the design of communication and memory architectures of massively parallel hardware multiprocessors necessary for the implementation of highly demanding applications. We demonstrated that for the massively parallel hardware multiprocessors the traditionally used flat communication architectures and multi-port memories do not scale well, and the memory and communication network influence on both the throughput and circuit area dominates the processors influence. To resolve the problems and ensure scalability, we proposed to design highly optimized application-specific hierarchical and/or partitioned communication and memory architectures through exploring and exploiting the regularity and hierarchy of the actual data flows of a given application. Furthermore, we proposed some data distribution and related data mapping schemes in the shared (global partitioned memories with the aim to eliminate the memory access conflicts, as well as, to ensure that our communication design strategies will be applicable. We incorporated these architecture synthesis strategies into our quality-driven model-based multi-processor design method and related automated architecture exploration framework. Using this framework, we performed a large series of experiments that demonstrate many various important features of the synthesized memory and communication architectures. They also demonstrate that our method and related framework are able to efficiently synthesize well scalable memory and communication architectures even for the high-end multiprocessors. The gains as high as 12-times in performance and 25-times in area can be obtained when using the hierarchical communication networks instead of the flat networks. However, for the high parallelism levels only the partitioned approach ensures the scalability in performance.

Low power design of wireless endoscopy compression/communication architecture

Directory of Open Access Journals (Sweden)

Zitouni Abdelkrim

2018-05-01

Full Text Available A wireless endoscopy capsule represents an efficient device interesting on the examination of digestive diseases. Many performance criteria’s (silicon area, dissipated power, image quality, computational time, etc. need to be deeply studied.In this paper, our interest is the optimization of the indicated criteria. The proposed methodology is based on exploring the advantages of the DCT/DWT transforms by combining them into single architecture. For arithmetic operations, the MCLA technique is used. This architecture integrates also a CABAC entropy coder that supports all binarization schemes. AMBA/I2C architecture is developed for assuring optimized communication.The comparisons of the proposed architecture with the most popular methods explained in related works show efficient results in terms dissipated power, hardware cost, and computation speed. Keywords: Wireless endoscopy capsule, DCT/DWT image compression, CABAC entropy coder, AMBA/I2C multi-bus architecture

Hardware Synchronization for Embedded Multi-Core Processors

DEFF Research Database (Denmark)

Stoif, Christian; Schoeberl, Martin; Liccardi, Benito

2011-01-01

Multi-core processors are about to conquer embedded systems — it is not the question of whether they are coming but how the architectures of the microcontrollers should look with respect to the strict requirements in the field. We present the step from one to multiple cores in this paper, establi......Multi-core processors are about to conquer embedded systems — it is not the question of whether they are coming but how the architectures of the microcontrollers should look with respect to the strict requirements in the field. We present the step from one to multiple cores in this paper...

A Behaviour-Based Architecture for Mapless Navigation Using Vision

Directory of Open Access Journals (Sweden)

Mehmet Serdar Guzel

2012-04-01

Full Text Available Autonomous robots operating in an unknown and uncertain environment must be able to cope with dynamic changes to that environment. For a mobile robot in a cluttered environment to navigate successfully to a goal while avoiding obstacles is a challenging problem. This paper presents a new behaviour-based architecture design for mapless navigation. The architecture is composed of several modules and each module generates behaviours. A novel method, inspired from a visual homing strategy, is adapted to a monocular vision-based system to overcome goal-based navigation problems. A neural network-based obstacle avoidance strategy is designed using a 2-D scanning laser. To evaluate the performance of the proposed architecture, the system has been tested using Microsoft Robotics Studio (MRS, which is a very powerful 3D simulation environment. In addition, real experiments to guide a Pioneer 3-DX mobile robot, equipped with a pan-tilt-zoom camera in a cluttered environment are presented. The analysis of the results allows us to validate the proposed behaviour-based navigation strategy.

The architecture and prototype implementation of the Model Environment system

Science.gov (United States)

Donchyts, G.; Treebushny, D.; Primachenko, A.; Shlyahtun, N.; Zheleznyak, M.

2007-01-01

An approach that simplifies software development of the model based decision support systems for environmental management has been introduced. The approach is based on definition and management of metadata and data related to computational model without losing data semantics and proposed methods of integration of the new modules into the information system and their management. An architecture of the integrated modelling system is presented. The proposed architecture has been implemented as a prototype of integrated modelling system using. NET/Gtk{#} and is currently being used to re-design European Decision Support System for Nuclear Emergency Management RODOS (http://www.rodos.fzk.de) using Java/Swing.

Design health village with the approach of sustainable architecture ...

African Journals Online (AJOL)

Journal Home > Vol 8, No 3 (2016) > ... a natural environment and away from the pollution of urban life , traditional medical care, hydrotherapy, sports and ... Keywords: Health; city health; smart; sustainability in architecture; architectural design ...

A Web Centric Architecture for Deploying Multi-Disciplinary Engineering Design Processes

Science.gov (United States)

Woyak, Scott; Kim, Hongman; Mullins, James; Sobieszczanski-Sobieski, Jaroslaw

2004-01-01

There are continuous needs for engineering organizations to improve their design process. Current state of the art techniques use computational simulations to predict design performance, and optimize it through advanced design methods. These tools have been used mostly by individual engineers. This paper presents an architecture for achieving results at an organization level beyond individual level. The next set of gains in process improvement will come from improving the effective use of computers and software within a whole organization, not just for an individual. The architecture takes advantage of state of the art capabilities to produce a Web based system to carry engineering design into the future. To illustrate deployment of the architecture, a case study for implementing advanced multidisciplinary design optimization processes such as Bi-Level Integrated System Synthesis is discussed. Another example for rolling-out a design process for Design for Six Sigma is also described. Each example explains how an organization can effectively infuse engineering practice with new design methods and retain the knowledge over time.

Multi-GPU accelerated three-dimensional FDTD method for electromagnetic simulation.

Science.gov (United States)

Nagaoka, Tomoaki; Watanabe, Soichi

2011-01-01

Numerical simulation with a numerical human model using the finite-difference time domain (FDTD) method has recently been performed in a number of fields in biomedical engineering. To improve the method's calculation speed and realize large-scale computing with the numerical human model, we adapt three-dimensional FDTD code to a multi-GPU environment using Compute Unified Device Architecture (CUDA). In this study, we used NVIDIA Tesla C2070 as GPGPU boards. The performance of multi-GPU is evaluated in comparison with that of a single GPU and vector supercomputer. The calculation speed with four GPUs was approximately 3.5 times faster than with a single GPU, and was slightly (approx. 1.3 times) slower than with the supercomputer. Calculation speed of the three-dimensional FDTD method using GPUs can significantly improve with an expanding number of GPUs.

Marshall Application Realignment System (MARS) Architecture

Science.gov (United States)

Belshe, Andrea; Sutton, Mandy

2010-01-01

The Marshall Application Realignment System (MARS) Architecture project was established to meet the certification requirements of the Department of Defense Architecture Framework (DoDAF) V2.0 Federal Enterprise Architecture Certification (FEAC) Institute program and to provide added value to the Marshall Space Flight Center (MSFC) Application Portfolio Management process. The MARS Architecture aims to: (1) address the NASA MSFC Chief Information Officer (CIO) strategic initiative to improve Application Portfolio Management (APM) by optimizing investments and improving portfolio performance, and (2) develop a decision-aiding capability by which applications registered within the MSFC application portfolio can be analyzed and considered for retirement or decommission. The MARS Architecture describes a to-be target capability that supports application portfolio analysis against scoring measures (based on value) and overall portfolio performance objectives (based on enterprise needs and policies). This scoring and decision-aiding capability supports the process by which MSFC application investments are realigned or retired from the application portfolio. The MARS Architecture is a multi-phase effort to: (1) conduct strategic architecture planning and knowledge development based on the DoDAF V2.0 six-step methodology, (2) describe one architecture through multiple viewpoints, (3) conduct portfolio analyses based on a defined operational concept, and (4) enable a new capability to support the MSFC enterprise IT management mission, vision, and goals. This report documents Phase 1 (Strategy and Design), which includes discovery, planning, and development of initial architecture viewpoints. Phase 2 will move forward the process of building the architecture, widening the scope to include application realignment (in addition to application retirement), and validating the underlying architecture logic before moving into Phase 3. The MARS Architecture key stakeholders are most

Hybrid Multi-Layer Network Control for Emerging Cyber-Infrastructures

Energy Technology Data Exchange (ETDEWEB)

Summerhill, Richard [Internet2, Washington, DC (United States); Lehman, Tom [Univ. of Southern California, Los Angeles, CA (United States). Information Sciences Inst. (ISI); Ghani, Nasir [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Electrical & Computer Engineering; Boyd, Eric [Univ. Corporation for Advanced Internet Development (UCAID), Washington, DC (United States)

2009-08-14

There were four basic task areas identified for the Hybrid-MLN project. They are: Multi-Layer, Multi-Domain, Control Plane Architecture and Implementation; Heterogeneous DataPlane Testing; Simulation; Project Publications, Reports, and Presentations.

Fifth International Workshop on Sharing and Reusing Architectural Knowledge (SHARK 2010)

NARCIS (Netherlands)

Lago, Patricia; Avgeriou, Paris; Kruchten, Philippe

2010-01-01

Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

Making ceramics used for compound environment into multi-composite and evaluation of their multi-dimensional system

International Nuclear Information System (INIS)

Mitsuhashi, Takefumi

1996-01-01

In order to advance current nuclear power technology greatly, the development of the boundary materials suitable to between the environments with largely different properties is indispensable. In the research of first period, the ceramic having the corrosion resistance in liquid sodium which is far superior to metals was found. As boundary material, in addition, thermal, mechanical and radiation resistant properties are required. In the project of second period, it is aimed at to establish the basic technology for the synthesis techniques for multi-composite materials that possess the combination of the excellent characteristics of individual monolithic system ceramics. The liquid sodium immersion test of various ceramics in the research of first period is reported. The diffusion of sodium in ceramics was also examined. As the simplified quick evaluation technique, the corrosion test in KOH solution was carried out. As for ceramic multi-composites, Y ions were implanted in the surface of alumina, and the changes of structure and corrosion resistance were examined. The surface condition of ceramics and the adsorption of alkali metals were investigated. (K.I.)

Test and Evaluation of Architecture-Aware Compiler Environment

Science.gov (United States)

2011-11-01

These empirical studies form an initial baseline for requirements and opportunities for Exascale class computer architecture and software. They also...allow an initial validation of the PIR toolset and the application assumptions underlying the Exascale studies [3, 4]. 4 Approved for public...for greater efficiency in execution. In some cases they show behavior similar to that assumed in the Exascale studies; in other cases, there is

A parallel-pipelined architecture for a multi carrier demodulator

Science.gov (United States)

Kwatra, S. C.; Jamali, M. M.; Eugene, Linus P.

1991-03-01

Analog devices have been used for processing the information on board the satellites. Presently, digital devices are being used because they are economical and flexible as compared to their analog counterparts. Several schemes of digital transmission can be used depending on the data rate requirement of the user. An economical scheme of transmission for small earth stations uses single channel per carrier/frequency division multiple access (SCPC/FDMA) on the uplink and time division multiplexing (TDM) on the downlink. This is a typical communication service offered to low data rate users in commercial mass market. These channels usually pertain to either voice or data transmission. An efficient digital demodulator architecture is provided for a large number of law data rate users. A demodulator primarily consists of carrier, clock, and data recovery modules. This design uses principles of parallel processing, pipelining, and time sharing schemes to process large numbers of voice or data channels. It maintains the optimum throughput which is derived from the designed architecture and from the use of high speed components. The design is optimized for reduced power and area requirements. This is essential for satellite applications. The design is also flexible in processing a group of a varying number of channels. The algorithms that are used are verified by the use of a computer aided software engineering (CASE) tool called the Block Oriented System Simulator. The data flow, control circuitry, and interface of the hardware design is simulated in C language. Also, a multiprocessor approach is provided to map, model, and simulate the demodulation algorithms mainly from a speed view point. A hypercude based architecture implementation is provided for such a scheme of operation. The hypercube structure and the demodulation models on hypercubes are simulated in Ada.

COMPARISON OF CLASSICAL AND INTERACTIVE MULTI-ROBOT EXPLORATION STRATEGIES IN POPULATED ENVIRONMENTS

Directory of Open Access Journals (Sweden)

Nassim Kalde

2015-06-01

Full Text Available Multi-robot exploration consists in coordinating robots for mapping an unknown environment. It raises several issues concerning task allocation, robot control, path planning and communication. We study exploration in populated environments, in which pedestrian flows can severely impact performances. However, humans have adaptive skills for taking advantage of these flows while moving. Therefore, in order to exploit these human abilities, we propose a novel exploration strategy that explicitly allows for human-robot interactions. Our model for exploration in populated environments combines the classical frontier-based strategy with our interactive approach. We implement interactions where robots can locally choose a human guide to follow and define a parametric heuristic to balance interaction and frontier assignments. Finally, we evaluate to which extent human presence impacts our exploration model in terms of coverage ratio, travelled distance and elapsed time to completion.

Evolutionary dynamics of protein domain architecture in plants

Directory of Open Access Journals (Sweden)

Zhang Xue-Cheng

2012-01-01

Full Text Available Abstract Background Protein domains are the structural, functional and evolutionary units of the protein. Protein domain architectures are the linear arrangements of domain(s in individual proteins. Although the evolutionary history of protein domain architecture has been extensively studied in microorganisms, the evolutionary dynamics of domain architecture in the plant kingdom remains largely undefined. To address this question, we analyzed the lineage-based protein domain architecture content in 14 completed green plant genomes. Results Our analyses show that all 14 plant genomes maintain similar distributions of species-specific, single-domain, and multi-domain architectures. Approximately 65% of plant domain architectures are universally present in all plant lineages, while the remaining architectures are lineage-specific. Clear examples are seen of both the loss and gain of specific protein architectures in higher plants. There has been a dynamic, lineage-wise expansion of domain architectures during plant evolution. The data suggest that this expansion can be largely explained by changes in nuclear ploidy resulting from rounds of whole genome duplications. Indeed, there has been a decrease in the number of unique domain architectures when the genomes were normalized into a presumed ancestral genome that has not undergone whole genome duplications. Conclusions Our data show the conservation of universal domain architectures in all available plant genomes, indicating the presence of an evolutionarily conserved, core set of protein components. However, the occurrence of lineage-specific domain architectures indicates that domain architecture diversity has been maintained beyond these core components in plant genomes. Although several features of genome-wide domain architecture content are conserved in plants, the data clearly demonstrate lineage-wise, progressive changes and expansions of individual protein domain architectures, reinforcing

Architecture is Life... ...Life is Architecture

OpenAIRE

Snider, David E

2001-01-01

When thinking about architecture, I cannot help but think about my life and the things that have affected my life. How does the environment around us effect the daily decisions we make? How do the experiences throughout our life impact who we are and who we become? The people and surroundings we choose will ultimately decide the type of people we become. When we select our surroundings we are in turn selecting our ideal community. Everyone is trying to achieve community in some sense, from in...

An agent-based peer-to-peer architecture for semantic discovery of manufacturing services across virtual enterprises

Science.gov (United States)

Zhang, Wenyu; Zhang, Shuai; Cai, Ming; Jian, Wu

2015-04-01

With the development of virtual enterprise (VE) paradigm, the usage of serviceoriented architecture (SOA) is increasingly being considered for facilitating the integration and utilisation of distributed manufacturing resources. However, due to the heterogeneous nature among VEs, the dynamic nature of a VE and the autonomous nature of each VE member, the lack of both sophisticated coordination mechanism in the popular centralised infrastructure and semantic expressivity in the existing SOA standards make the current centralised, syntactic service discovery method undesirable. This motivates the proposed agent-based peer-to-peer (P2P) architecture for semantic discovery of manufacturing services across VEs. Multi-agent technology provides autonomous and flexible problemsolving capabilities in dynamic and adaptive VE environments. Peer-to-peer overlay provides highly scalable coupling across decentralised VEs, each of which exhibiting as a peer composed of multiple agents dealing with manufacturing services. The proposed architecture utilises a novel, efficient, two-stage search strategy - semantic peer discovery and semantic service discovery - to handle the complex searches of manufacturing services across VEs through fast peer filtering. The operation and experimental evaluation of the prototype system are presented to validate the implementation of the proposed approach.

An Investigation of Factors Affecting Multi-Task Performance in an Immersive Environment

Science.gov (United States)

2007-12-01

in Team Sports . Personality and Individual Differences July 1998, 25 (1), 119- 128. Potosky, D. A Field Study of Computer Efficacy Beliefs as an...vacation I like to engage in active sports rather than just lie around. ____ 60. I’ll try anything once. ____ 61. I often feel unsure of myself...heart rate variability ( HRV ). • To identify non-invasive psychological and physiological measures of cognitive readiness in a multi-task environment

A Multi-purpose Rescue Vehicle and a human–robot interface architecture for remote assistance in ITER

International Nuclear Information System (INIS)

Soares, João; Vale, Alberto; Ventura, Rodrigo

2015-01-01

Highlights: • Design of an omnidirectional vehicle equipped with cameras and laser range finders. • Two robotic manipulators that slide over the vehicle's body to perform independent tasks. • Architecture to connect the control system, communication, power, navigation and HMI. • An immersive interface HMI with augmented reality features with head mounted display. - Abstract: The remote handling (RH) plays an important role in nuclear test facilities, such as in ITER, for in-vessel and ex-vessel maintenance operations. Unexpected situations may occur when RH devices fail. Since no human being is allowed during the RH operations, a Multi-purpose Rescue Vehicle (MPRV) must be required for providing support in site. This paper proposes a design of a MPRV, i.e., a mobile platform equipped with different sensors and two manipulators with different sets of end-effectors. A human–machine interface is also proposed to remotely operate the MPRV and to carry out rescue and recovery operations.

A Multi-purpose Rescue Vehicle and a human–robot interface architecture for remote assistance in ITER

Energy Technology Data Exchange (ETDEWEB)

Soares, João [Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Vale, Alberto, E-mail: avale@ipfn.tecnico.ulisboa.pt [Instituto de Plasmas e Fusão Nuclear, Instituto SuperiorTécnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Ventura, Rodrigo, E-mail: rodrigo.ventura@isr.tecnico.ulisboa.pt [Laboratório de Robótica e Sistemas em Engenharia eCiência, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal)

2015-10-15

Highlights: • Design of an omnidirectional vehicle equipped with cameras and laser range finders. • Two robotic manipulators that slide over the vehicle's body to perform independent tasks. • Architecture to connect the control system, communication, power, navigation and HMI. • An immersive interface HMI with augmented reality features with head mounted display. - Abstract: The remote handling (RH) plays an important role in nuclear test facilities, such as in ITER, for in-vessel and ex-vessel maintenance operations. Unexpected situations may occur when RH devices fail. Since no human being is allowed during the RH operations, a Multi-purpose Rescue Vehicle (MPRV) must be required for providing support in site. This paper proposes a design of a MPRV, i.e., a mobile platform equipped with different sensors and two manipulators with different sets of end-effectors. A human–machine interface is also proposed to remotely operate the MPRV and to carry out rescue and recovery operations.

A self-organized internal models architecture for coding sensory-motor schemes

Directory of Open Access Journals (Sweden)

Esaú eEscobar Juárez

2016-04-01

Full Text Available Cognitive robotics research draws inspiration from theories and models on cognition, as conceived by neuroscience or cognitive psychology, to investigate biologically plausible computational models in artificial agents. In this field, the theoretical framework of Grounded Cognition provides epistemological and methodological grounds for the computational modeling of cognition. It has been stressed in the literature that textit{simulation}, textit{prediction}, and textit{multi-modal integration} are key aspects of cognition and that computational architectures capable of putting them into play in a biologically plausible way are a necessity.Research in this direction has brought extensive empirical evidencesuggesting that textit{Internal Models} are suitable mechanisms forsensory-motor integration. However, current Internal Models architectures show several drawbacks, mainly due to the lack of a unified substrate allowing for a true sensory-motor integration space, enabling flexible and scalable ways to model cognition under the embodiment hypothesis constraints.We propose the Self-Organized Internal ModelsArchitecture (SOIMA, a computational cognitive architecture coded by means of a network of self-organized maps, implementing coupled internal models that allow modeling multi-modal sensory-motor schemes. Our approach addresses integrally the issues of current implementations of Internal Models.We discuss the design and features of the architecture, and provide empirical results on a humanoid robot that demonstrate the benefits and potentialities of the SOIMA concept for studying cognition in artificial agents.

[Artificial intelligence in medicine: project of a mobile platform in an intelligent environment for the care of disabled and elderly people].

Science.gov (United States)

Cortés, Ulises; Annicchiarico, Roberta; Campana, Fabio; Vázquez-Salceda, Javier; Urdiales, Cristina; Canãmero, Lola; López, Maite; Sánchez-Marrè, Miquel; Di Vincenzo, Sarah; Caltagirone, Carlo

2004-04-01

A project based on the integration of new technologies and artificial intelligence to develop a device--e-tool--for disabled patients and elderly people is presented. A mobile platform in intelligent environments (skilled-care facilities and home-care), controlled and managed by a multi-level architecture, is proposed to support patients and caregivers to increase self-dependency in activities of daily living.

Preserving urban objects of historicaland architectural heritage

Directory of Open Access Journals (Sweden)

Bal'zannikova Ekaterina Mikhailovna

2014-01-01

Full Text Available Large cities of central Russia were built under the influence of the factors that played an important role in protecting their population; natural resources and opportunities for trading were also essential. The industrial development and construction of large industrial facilities were significant for the formation of urban environment. As a result architectural monuments of great historical value that have a significant influence on the formation of the modern city image were preserved.Nowadays, a great number of buildings of historical and architectural heritage turned out to be in poor condition. Funding and its efficient use are rational means of saving the most valuable objects of historical and cultural heritage. In order to do this it is necessary to solve the problems of developing complex and effective measures for preserving these objectsThe existing method of preserving urban objects does not focus on urban architectural objects of historical and architectural value. It does not cover the study of urban development features in architectural and town-planning environment surrounding this object, it does not determine the historical and architectural value of the object and it does not identify the relationship of the object and the surrounding objects as well as architectural frame of the total area. That is why the existing method cannot be considered an appropriate system for preserving the objects of historical and architectural heritage.In order to avoid the disadvantages mentioned above and to increase tourist interest to the architecturally valuable buildings in urban areas, the author has proposed a complex approach to improve the method of reconstructing urban objects of great historical and architectural significance.The existing method of preserving historical objects includes the preparatory period of studying the degree of historical and architectural heritage wear and decay, developing the techniques for strengthening

Light Rhythms in Architecture

DEFF Research Database (Denmark)

Bülow, Katja

2013-01-01

formation and rhythm. When integrated into an architectural concept, electrical lighting non-intended for poetic composition has the ability to contribute to place, time, and function-telling aspects of places in urban contexts. Urban environments are information wise challenging to pre-historic human...

Architectural design of experience based factory model for software ...

African Journals Online (AJOL)

architectural design. Automation features are incorporated in the design in which workflow system and intelligent agents are integrated, and the facilitation of cloud environment is empowered to further support the automation. Keywords: architectural design; knowledge management; experience factory; workflow;

Reconfigurable multi-DSP parallel computing architecture based on DSM%基于DSM的可重构多DSP并行处理架构

Institute of Scientific and Technical Information of China (English)

程鑫; 吴华春

2012-01-01

提出一种基于DSM的可在线重构多DSP并行处理架构,采用基于自定义内部总线的信息传递服务,在分布式物理内存上实现了统一编址的共享内存模型,减小了DSP之间的数据传递开销；设计基于VME总线的在线重构来实现针对消息传递服务的重定义,增强了并行计算架构的通用性.实验表明,采用此DSM能减小了并行DSP对共享数据同步访问开销,满足多轴精密同步运动控制系统需求.%A design of reconfigurable multi-digital signal processor (DSP) parallel computing architecture based on distributed shared memory (DSM) was proposed. A message-passing communication based on the user-defined internal bus (IB) was designed to implement a shared memory model on physically distributed memory, which decreased the data transmission overhead. Online reconfiguration mechanism was designed to implement message-passing communication reconfiguration, which in-creasd the universality of parallel architecture. The experiment shows that adopting the DSM introduced can reduce simultaneous access overhead to shared data, which satisfies the requirements of ultra-precise multi-axis motion control system.

Design and development of a run-time monitor for multi-core architectures in cloud computing.

Science.gov (United States)

Kang, Mikyung; Kang, Dong-In; Crago, Stephen P; Park, Gyung-Leen; Lee, Junghoon

2011-01-01

Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is a type of parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring system status changes, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design and develop a Run-Time Monitor (RTM) which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize cloud computing resources for multi-core architectures. RTM monitors application software through library instrumentation as well as underlying hardware through a performance counter optimizing its computing configuration based on the analyzed data.

A new three-tier architecture design for multi-sphere neutron spectrometer with the FLUKA code

Science.gov (United States)

Huang, Hong; Yang, Jian-Bo; Tuo, Xian-Guo; Liu, Zhi; Wang, Qi-Biao; Wang, Xu

2016-07-01

The current commercially, available Bonner sphere neutron spectrometer (BSS) has high sensitivity to neutrons below 20 MeV, which causes it to be poorly placed to measure neutrons ranging from a few MeV to 100 MeV. The paper added moderator layers and the auxiliary material layer upon 3He proportional counters with FLUKA code, with a view to improve. The results showed that the responsive peaks to neutrons below 20 MeV gradually shift to higher energy region and decrease slightly with the increasing moderator thickness. On the contrary, the response for neutrons above 20 MeV was always very low until we embed auxiliary materials such as copper (Cu), lead (Pb), tungsten (W) into moderator layers. This paper chose the most suitable auxiliary material Pb to design a three-tier architecture multi-sphere neutron spectrometer (NBSS). Through calculating and comparing, the NBSS was advantageous in terms of response for 5-100 MeV and the highest response was 35.2 times the response of polyethylene (PE) ball with the same PE thickness.

Design and Development of a Run-Time Monitor for Multi-Core Architectures in Cloud Computing

Directory of Open Access Journals (Sweden)

Junghoon Lee

2011-03-01

Full Text Available Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is a type of parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring system status changes, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design and develop a Run-Time Monitor (RTM which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize cloud computing resources for multi-core architectures. RTM monitors application software through library instrumentation as well as underlying hardware through a performance counter optimizing its computing configuration based on the analyzed data.

Initial validation of ATLAS software on the ARM architecture

Energy Technology Data Exchange (ETDEWEB)

Kawamura, Gen; Quadt, Arnulf; Smith, Joshua Wyatt [II. Physikalisches Institut, Georg-August Universitaet Goettingen (Germany); Seuster, Rolf [TRIUMF (Canada); Stewart, Graeme [University of Glasgow (United Kingdom)

2016-07-01

In the early 2000's the introduction of the multi-core era of computing helped industry and experiments such as ATLAS realize even more computing power. This was necessary as the limits of what a single-core processor could do where quickly being reached. Our current model of computing is to increase the number of multi-core nodes in a server farm in order to handle the increased influx of data. As power costs and our need for more computing power increase, this model will eventually become non-realistic. Once again a paradigm shift has to take place. One such option is to look at alternative architectures for large scale server farms. ARM processors are such an example. Making up approximately 95 % of the smartphone and tablet market these processors are widely available, very power conservative and constantly becoming faster. The ATLAS software code base (Athena) is extremely complex comprising of more than 6.5 million lines of code. It has very recently been ported to the ARM 64-bit architecture. The process of our port as well as the first validation plots are presented and compared to the traditional x86 architecture.

Network monitoring module of BES III system environment

International Nuclear Information System (INIS)

Song Liwen; Zhao Jingwei; Zhang Bingyun

2002-01-01

In order to meet the needs of the complicated network architecture of BES III (Beijing Spectrometer III) and make sure normal online running in the future, it is necessary to develop a multi-platforms Network Monitoring Tool which can help system administrator monitor and manage BES III network. The author provides a module that can monitor not only the traffic of switch-router's ports but also the performance status of key devices in the network environment, meanwhile it can also give warning to manager and submit the related reports. the great sense, the theory basis, the implementing method and the graph in formation of this tool will be discussed

Reflective Subjects in Kant and Architectural Design Education

Science.gov (United States)

Rawes, Peg

2007-01-01

In architectural design education, students develop drawing, conceptual, and critical skills which are informed by their ability to reflect upon the production of ideas in design processes and in the urban, environmental, social, historical, and cultural context that define architecture and the built environment. Reflective actions and thinking…

A functional-structural kiwifruit vine model integrating architecture, carbon dynamics and effects of the environment.

Science.gov (United States)

Cieslak, Mikolaj; Seleznyova, Alla N; Hanan, Jim

2011-04-01

Functional-structural modelling can be used to increase our understanding of how different aspects of plant structure and function interact, identify knowledge gaps and guide priorities for future experimentation. By integrating existing knowledge of the different aspects of the kiwifruit (Actinidia deliciosa) vine's architecture and physiology, our aim is to develop conceptual and mathematical hypotheses on several of the vine's features: (a) plasticity of the vine's architecture; (b) effects of organ position within the canopy on its size; (c) effects of environment and horticultural management on shoot growth, light distribution and organ size; and (d) role of carbon reserves in early shoot growth. Using the L-system modelling platform, a functional-structural plant model of a kiwifruit vine was created that integrates architectural development, mechanistic modelling of carbon transport and allocation, and environmental and management effects on vine and fruit growth. The branching pattern was captured at the individual shoot level by modelling axillary shoot development using a discrete-time Markov chain. An existing carbon transport resistance model was extended to account for several source/sink components of individual plant elements. A quasi-Monte Carlo path-tracing algorithm was used to estimate the absorbed irradiance of each leaf. Several simulations were performed to illustrate the model's potential to reproduce the major features of the vine's behaviour. The model simulated vine growth responses that were qualitatively similar to those observed in experiments, including the plastic response of shoot growth to local carbon supply, the branching patterns of two Actinidia species, the effect of carbon limitation and topological distance on fruit size and the complex behaviour of sink competition for carbon. The model is able to reproduce differences in vine and fruit growth arising from various experimental treatments. This implies it will be a valuable

DYNAMIC ITELLECTUAL SYSTEM OF PROCESS MANAGEMENT IN INFORMATION AND EDUCATION ENVIRONMENT OF HIGHER EDUCATIONAL INSTITUTIONS

Directory of Open Access Journals (Sweden)

Yuriy F. Telnov

2013-01-01

Full Text Available The paper represents the technology of application of dynamic intelligent process management system for integrated information-educational environment of university and providing the access for community in order to develop flexible education programs and teaching manuals based on multi-agent and service-oriented architecture. The article depicts the prototype of dynamic intelligent process management system using for forming of educational-methodic body. Efficiency of creation and usage of dynamic intelligent process management system is evaluated. 

Multi-level Control Framework for Enhanced Flexibility of Active Distribution Network

DEFF Research Database (Denmark)

Nainar, Karthikeyan; Pokhrel, Basanta Raj; Pillai, Jayakrishnan Radhakrishna

2017-01-01

In this paper, the control objectives of future active distribution networks with high penetration of renewables and flexible loads are analyzed and reviewed. From a state of the art review, the important control objectives seen from the perspective of a distribution system operator are identifie......-ordination and management of the network assets at different voltage levels and geographical locations. The paper finally shows the applicability of the multi-level control architecture to some of the key challenges in the distribution system operation by relevant scenarios....... to be hosting capacity improvement, high reliable operation and cost effective network management. Based on this review and a state of the art review concerning future distribution network control methods, a multi-level control architecture is constructed for an active distribution network, which satisfies...... the selected control objectives and provides enhanced flexibility. The control architecture is supported by generation/load forecasting and distribution state estimation techniques to improve the controllability of the network. The multi-level control architecture consists of three levels of hierarchical...

Design and implementation of dynamic microservice discovery solution in cloud architectures

OpenAIRE

Malc, Urban

2017-01-01

Microservice architecture offers many advantages over monolithic application design, but at the same time presents challenges, not present in traditional architectures. One of the challenges is handling dynamic allocation of microservice addresses. Modern applications, built in microservice arhitecture typically run in containerized environments, which enable simple deployment and horizontal scaling of microservices. Containerized environments usually allocate microservice addresses dynamical...

ADVANCED SCHEDULER FOR COOPERATIVE EXECUTION OF THREADS ON MULTI-CORE SYSTEM

Directory of Open Access Journals (Sweden)

O. N. Karasik

2017-01-01

Full Text Available Three architectures of the cooperative thread scheduler in a multithreaded application that is executed on a multi-core system are considered. Architecture A0 is based on the synchronization and scheduling facilities, which are provided by the operating system. Architecture A1 introduces a new synchronization primitive and a single queue of the blocked threads in the scheduler, which reduces the interaction activity between the threads and operating system, and significantly speed up the processes of blocking and unblocking the threads. Architecture A2 replaces the single queue of blocked threads with dedicated queues, one for each of the synchronizing primitives, extends the number of internal states of the primitive, reduces the inter- dependence of the scheduling threads, and further significantly speeds up the processes of blocking and unblocking the threads. All scheduler architectures are implemented on Windows operating systems and based on the User Mode Scheduling. Important experimental results are obtained for multithreaded applications that implement two blocked parallel algorithms of solving the linear algebraic equation systems by the Gaussian elimination. The algorithms differ in the way of the data distribution among threads and by the thread synchronization models. The number of threads varied from 32 to 7936. Architecture A1 shows the acceleration of up to 8.65% and the architecture A2 shows the acceleration of up to 11.98% compared to A0 architecture for the blocked parallel algorithms computing the triangular form and performing the back substitution. On the back substitution stage of the algorithms, architecture A1 gives the acceleration of up to 125%, and architecture A2 gives the acceleration of up to 413% compared to architecture A0. The experiments clearly show that the proposed architectures, A1 and A2 outperform A0 depending on the number of thread blocking and unblocking operations, which happen during the execution of

Cloud GIS and 3d Modelling to Enhance Sardinian Late Gothic Architectural Heritage

Science.gov (United States)

Pisu, C.; Casu, P.

2013-07-01

This work proposes the documentation, virtual reconstruction and spreading of architectural heritage through the use of software packages that operate in cloud computing. Cloud computing makes available a variety of applications and tools which can be effective both for the preparation and for the publication of different kinds of data. We tested the versatil ity and ease of use of such documentation tools in order to study a particular architectural phenomenon. The ultimate aim is to develop a multi-scale and multi-layer information system, oriented to the divulgation of Sardinian late gothic architecture. We tested the applications on portals of late Gothic architecture in Sardinia. The actions of conservation, protection and enhancement of cultural heritage are all founded on the social function that can be reached only through the widest possible fruition by the community. The applications of digital technologies on cultural heritage can contribute to the construction of effective communication models that, relying on sensory and emotional involvement of the viewer, can attract a wider audience to cultural content.

CLOUD GIS AND 3D MODELLING TO ENHANCE SARDINIAN LATE GOTHIC ARCHITECTURAL HERITAGE

Directory of Open Access Journals (Sweden)

C. Pisu

2013-07-01

Full Text Available This work proposes the documentation, virtual reconstruction and spreading of architectural heritage through the use of software packages that operate in cloud computing. Cloud computing makes available a variety of applications and tools which can be effective both for the preparation and for the publication of different kinds of data. We tested the versatil ity and ease of use of such documentation tools in order to study a particular architectural phenomenon. The ultimate aim is to develop a multi-scale and multi-layer information system, oriented to the divulgation of Sardinian late gothic architecture. We tested the applications on portals of late Gothic architecture in Sardinia. The actions of conservation, protection and enhancement of cultural heritage are all founded on the social function that can be reached only through the widest possible fruition by the community. The applications of digital technologies on cultural heritage can contribute to the construction of effective communication models that, relying on sensory and emotional involvement of the viewer, can attract a wider audience to cultural content.

Performance Comparison of Reconstruction Algorithms in Discrete Blind Multi-Coset Sampling

DEFF Research Database (Denmark)

Grigoryan, Ruben; Arildsen, Thomas; Tandur, Deepaknath

2012-01-01

This paper investigates the performance of different reconstruction algorithms in discrete blind multi-coset sampling. Multi-coset scheme is a promising compressed sensing architecture that can replace traditional Nyquist-rate sampling in the applications with multi-band frequency sparse signals...

A hardware and software architecture to deal with multimodal and collaborative interactions in multiuser virtual reality environments

Science.gov (United States)

Martin, P.; Tseu, A.; Férey, N.; Touraine, D.; Bourdot, P.

2014-02-01

Most advanced immersive devices provide collaborative environment within several users have their distinct head-tracked stereoscopic point of view. Combining with common used interactive features such as voice and gesture recognition, 3D mouse, haptic feedback, and spatialized audio rendering, these environments should faithfully reproduce a real context. However, even if many studies have been carried out on multimodal systems, we are far to definitively solve the issue of multimodal fusion, which consists in merging multimodal events coming from users and devices, into interpretable commands performed by the application. Multimodality and collaboration was often studied separately, despite of the fact that these two aspects share interesting similarities. We discuss how we address this problem, thought the design and implementation of a supervisor that is able to deal with both multimodal fusion and collaborative aspects. The aim of this supervisor is to ensure the merge of user's input from virtual reality devices in order to control immersive multi-user applications. We deal with this problem according to a practical point of view, because the main requirements of this supervisor was defined according to a industrial task proposed by our automotive partner, that as to be performed with multimodal and collaborative interactions in a co-located multi-user environment. In this task, two co-located workers of a virtual assembly chain has to cooperate to insert a seat into the bodywork of a car, using haptic devices to feel collision and to manipulate objects, combining speech recognition and two hands gesture recognition as multimodal instructions. Besides the architectural aspect of this supervisor, we described how we ensure the modularity of our solution that could apply on different virtual reality platforms, interactive contexts and virtual contents. A virtual context observer included in this supervisor in was especially designed to be independent to the

Lunar architecture and urbanism

Science.gov (United States)

Sherwood, Brent

1992-01-01

Human civilization and architecture have defined each other for over 5000 years on Earth. Even in the novel environment of space, persistent issues of human urbanism will eclipse, within a historically short time, the technical challenges of space settlement that dominate our current view. By adding modern topics in space engineering, planetology, life support, human factors, material invention, and conservation to their already renaissance array of expertise, urban designers can responsibly apply ancient, proven standards to the exciting new opportunities afforded by space. Inescapable facts about the Moon set real boundaries within which tenable lunar urbanism and its component architecture must eventually develop.

Digital architecture, wearable computers and providing affinity

DEFF Research Database (Denmark)

Guglielmi, Michel; Johannesen, Hanne Louise

2005-01-01

as the setting for the events of experience. Contemporary architecture is a meta-space residing almost any thinkable field, striving to blur boundaries between art, architecture, design and urbanity and break down the distinction between the material and the user or inhabitant. The presentation for this paper...... will, through research, a workshop and participation in a cumulus competition, focus on the exploration of boundaries between digital architecture, performative space and wearable computers. Our design method in general focuses on the interplay between the performing body and the environment – between...

PRINCIPLES OF ECOLOGICAL CONSTRUCTION IN FACHWERK ARCHITECTURE

Directory of Open Access Journals (Sweden)

Shubina Elena Vasil'evna

2013-04-01

Full Text Available The authors consider the ecological aspects of application of Fachwerk, a traditional structural system, in the present-day construction. The authors have identified the potential and defined the principal development and modernization trends of the Fachwerk architecture. The author provides arguments of outstanding contemporary architects in support of the statement that the Fachwerk architecture is friendly to humans and it does not deliver any damage to the environment. Fachwerk complies with the criteria of sustainable development; therefore, it may be retained in the future architecture.

Evaluation of state-of-the-art hardware architectures for fast cone-beam CT reconstruction

CERN Document Server

Scherl, Holger

2011-01-01

Holger Scherl introduces the reader to the reconstruction problem in computed tomography and its major scientific challenges that range from computational efficiency to the fulfillment of Tuy's sufficiency condition. The assessed hardware architectures include multi- and many-core systems, cell broadband engine architecture, graphics processing units, and field programmable gate arrays.

An Automated Negotiation-based Framework via Multi-Agent System for the Construction Domain

Directory of Open Access Journals (Sweden)

Moamin Mahmoud

2015-12-01

Full Text Available In this paper, we propose an automated multi-agent negotiation framework for decision making in the construction domain. It enables software agents to conduct negotiations and autonomously make decisions. The proposed framework consists of two types of components, internal and external. Internal components are integrated into the agent architecture while the external components are blended within the environment to facilitate the negotiation process. The internal components are negotiation algorithm, negotiation style, negotiation protocol, and solution generators. The external components are the negotiation base and the conflict resolution algorithm. We also discuss the decision making process flow in such system. There are three main processes in decision making for specific projects, which are propose solutions, negotiate solutions and handling conflict outcomes (conflict resolution. We finally present the proposed architecture that enables software agents to conduct automated negotiation in the construction domain.

Traditional buildings of Iran as a sign of sustainable architecture

Energy Technology Data Exchange (ETDEWEB)

Rezaei, Davood; Zare, Mohamad [Faculty of engineering, Zanjan University (Iran, Islamic Republic of)], Email: d_rezaei@znu.ac.ir, email: zaremd@yahoo.com

2011-07-01

With the rising price of energy and increasing concerns over the environment, ways of creating sustainable architecture are getting more and more attention. Buildings in Iran are confronted with a variety of weather conditions and specific measures have been taken to adapt traditional architecture to the environment and minimize energy consumption. The aim of this paper is to present the different materials and solutions used in traditional Iranian architecture. This review showed that sustainable architecture in an arid climate can be realised by the use of soil as a building insulator. Other methods consist in orienting the building in such a way as to absorb sunlight, using wind towers and wind scope, dividing a yard in such a way that different areas are used, depending on the season, and building underground spaces to provide comfortable conditions. This paper highlighted several historical methods and materials which can be used to bring about sustainable architecture in an arid climate.

A novel marketing mix and choice architecture framework to nudge restaurant customers toward healthy food environments to reduce obesity in the United States.

Science.gov (United States)

Kraak, V I; Englund, T; Misyak, S; Serrano, E L

2017-08-01

This review identified and adapted choice architecture frameworks to develop a novel framework that restaurant owners could use to promote healthy food environments for customers who currently overconsume products high in fat, sugar and sodium that increase their risk of obesity and diet-related non-communicable diseases. This review was conducted in three steps and presented as a narrative summary to demonstrate a proof of concept. Step 1 was a systematic review of nudge or choice architecture frameworks used to categorize strategies that cue healthy behaviours in microenvironments. We searched nine electronic databases between January 2000 and December 2016 and identified 1,244 records. Inclusion criteria led to the selection of five choice architecture frameworks, of which three were adapted and combined with marketing mix principles to highlight eight strategies (i.e. place, profile, portion, pricing, promotion, healthy default picks, prompting or priming and proximity). Step 2 involved conducting a comprehensive evidence review between January 2006 and December 2016 to identify U.S. recommendations for the restaurant sector organized by strategy. Step 3 entailed developing 12 performance metrics for the eight strategies. This framework should be tested to determine its value to assist restaurant owners to promote and socially normalize healthy food environments to reduce obesity and non-communicable diseases. © 2017 The Authors. Obesity Reviews published by John Wiley & Sons Ltd on behalf of World Obesity Federation.

An ODMG-compatible testbed architecture for scalable management and analysis of physics data

International Nuclear Information System (INIS)

Malon, D.M.; May, E.N.

1997-01-01

This paper describes a testbed architecture for the investigation and development of scalable approaches to the management and analysis of massive amounts of high energy physics data. The architecture has two components: an interface layer that is compliant with a substantial subset of the ODMG-93 Version 1.2 specification, and a lightweight object persistence manager that provides flexible storage and retrieval services on a variety of single- and multi-level storage architectures, and on a range of parallel and distributed computing platforms

VIRTUAL AND PHYSICAL ARCHITECTURAL ATMOSPHERE

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars

2016-01-01

This study, of the similarities between the perception of architectural space experienced in physical space conditions and in Virtual Reality, intents to clarify to what extend subjective and objective attributes of architectural space can be conveyed through a direct use of Building Information...... Models in Virtual Reality. 60 test persons experienced a specific test space as either a physical or a virtual environment, while data from their experiences was collected through a quantitative/qualitative questionnaire. The overall conclusion, from this phase of the study, is that even a simple BIM...... model through HMD VR can convey rather precise information about both subjective and objective experiences of architectural space, ambience and atmosphere. Next phase of the study will include eye-tracking data from the two scenarios....

From green architecture to architectural green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

A multi-modular helical magnetic millirobot navigating in curved tubular environments

Directory of Open Access Journals (Sweden)

Seungmun Jeon

2017-05-01

Full Text Available This paper proposes a novel multi-modular helical magnetic millirobot (MHMM able to navigate in curved tubular environments. The proposed MHMM is basically composed of head, middle, and tail modules serially connected by a universal joint, and can employ more modules if necessary. The head module is a helical body with a magnetic rotary tip attached to the front end. Thus, once located in a curved tube filled with a fluid, the MHMM can effectively generate navigating or unclogging motions simply actuated by an external rotating magnetic field. This paper also examines the dynamic characteristics of the MHMM under various working conditions to manipulate the MHMM in a stable and safe manner. Then, it demonstrates various controlled motions of the MHMM in an in-vitro pulsatile flow environment to show the validity of the proposed structure and method.

Neural architecture design based on extreme learning machine.

Science.gov (United States)

Bueno-Crespo, Andrés; García-Laencina, Pedro J; Sancho-Gómez, José-Luis

2013-12-01

Selection of the optimal neural architecture to solve a pattern classification problem entails to choose the relevant input units, the number of hidden neurons and its corresponding interconnection weights. This problem has been widely studied in many research works but their solutions usually involve excessive computational cost in most of the problems and they do not provide a unique solution. This paper proposes a new technique to efficiently design the MultiLayer Perceptron (MLP) architecture for classification using the Extreme Learning Machine (ELM) algorithm. The proposed method provides a high generalization capability and a unique solution for the architecture design. Moreover, the selected final network only retains those input connections that are relevant for the classification task. Experimental results show these advantages. Copyright © 2013 Elsevier Ltd. All rights reserved.

Towards an autonomous sensor architecture for persistent area protection

Science.gov (United States)

Thomas, Paul A.; Marshall, Gillian F.; Stubbins, Daniel J.; Faulkner, David A.

2016-10-01

The majority of sensor installations for area protection (e.g. critical national infrastructure, military forward operating bases, etc.) make use of banks of screens each containing one or more sensor feeds, such that the burden of combining data from the various sources, understanding the situation, and controlling the sensors all lies with the human operator. Any automation in the system is generally heavily bespoke for the particular installation, leading to an inflexible system which is difficult to change or upgrade. We have developed a modular system architecture consisting of intelligent autonomous sensor modules, a high level decision making module, a middleware integration layer and an end-user GUI. The modules are all effectively "plug and play", and we have demonstrated that it is relatively simple to incorporate legacy sensors into the architecture. We have extended our previously-reported SAPIENT demonstration system to operate with a larger number and variety of sensor modules, over an extended area, detecting and classifying a wider variety of "threat activities", both vehicular and pedestrian. We report the results of a demonstration of the SAPIENT system containing multiple autonomous sensor modules with a range of modalities including laser scanners, radar, TI, EO, acoustic and seismic sensors. They operate from a combination of mains, generator and battery power, and communicate with the central "hub" over Ethernet, point-to-point wireless links and Wi-Fi. The system has been configured to protect an extended area in a complex semi-urban environment. We discuss the operation of the SAPIENT system in a realistic demonstration environment (which included significant activity not under trial control), showing sensor cueing, multi-modal sensor fusion, threat prioritisation and target hand-off.

Proposed hardware architectures of particle filter for object tracking

Science.gov (United States)

Abd El-Halym, Howida A.; Mahmoud, Imbaby Ismail; Habib, SED

2012-12-01

In this article, efficient hardware architectures for particle filter (PF) are presented. We propose three different architectures for Sequential Importance Resampling Filter (SIRF) implementation. The first architecture is a two-step sequential PF machine, where particle sampling, weight, and output calculations are carried out in parallel during the first step followed by sequential resampling in the second step. For the weight computation step, a piecewise linear function is used instead of the classical exponential function. This decreases the complexity of the architecture without degrading the results. The second architecture speeds up the resampling step via a parallel, rather than a serial, architecture. This second architecture targets a balance between hardware resources and the speed of operation. The third architecture implements the SIRF as a distributed PF composed of several processing elements and central unit. All the proposed architectures are captured using VHDL synthesized using Xilinx environment, and verified using the ModelSim simulator. Synthesis results confirmed the resource reduction and speed up advantages of our architectures.

An architecture for agile shop floor control systems

DEFF Research Database (Denmark)

Langer, Gilad; Alting, Leo

2000-01-01

as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system...

Multi-channel data acquisition system for CT

International Nuclear Information System (INIS)

Cao Fuqiang; He Bin; Liu Guohua; Xu Minjian

2009-01-01

The architecture design and realization of a data acquisition system for multi-channel CT is described. The article introduces the conversion of analog signal to digital signal, the data cache and transmission. This data acquisition system can be widely used in the system which requires the multi-channel, weak current signal detection. (authors)

Principles of landscape architecture

NARCIS (Netherlands)

Nijhuis, S.

2013-01-01

The Department of Urbanism at the Faculty of Architecture and Built Environment, TU Delft considers urbanism as a planning and design oriented activity towards urban and rural landscapes. It aims to enhance, restore or create landscapes from a perspective of sustainable development, so as to guide,

Open architecture CNC system

Energy Technology Data Exchange (ETDEWEB)

Tal, J. [Galil Motion Control Inc., Sunnyvale, CA (United States); Lopez, A.; Edwards, J.M. [Los Alamos National Lab., NM (United States)

1995-04-01

In this paper, an alternative solution to the traditional CNC machine tool controller has been introduced. Software and hardware modules have been described and their incorporation in a CNC control system has been outlined. This type of CNC machine tool controller demonstrates that technology is accessible and can be readily implemented into an open architecture machine tool controller. Benefit to the user is greater controller flexibility, while being economically achievable. PC based, motion as well as non-motion features will provide flexibility through a Windows environment. Up-grading this type of controller system through software revisions will keep the machine tool in a competitive state with minimal effort. Software and hardware modules are mass produced permitting competitive procurement and incorporation. Open architecture CNC systems provide diagnostics thus enhancing maintainability, and machine tool up-time. A major concern of traditional CNC systems has been operator training time. Training time can be greatly minimized by making use of Windows environment features.

A Concept Plane using electric distributed propulsion Evaluation of advanced power architecture

OpenAIRE

Ridel , M.; Paluch , B.; Doll , C.; Donjat , D.; Hermetz , J.; Guigon , A.; Schmollgruber , P.; Atinault , O.; Choy , P.; Le Tallec , P.; Dessornes , O.; Lefebvre , T.

2015-01-01

International audience; Starting from electrical distributed propulsion system concept, the ONERA’s engineers demonstrated the viability of an all electrical aircraft for a small business aircraft. This paper describes the advanced power architecture considering energy conversion and power distribution. The design of this advanced power architecture requires the multi-physic integration of different domains as flight performances, safety and environmental requirements (thermal, electric, elec...

Partnering with Youth to Map Their Neighborhood Environments: A Multi-Layered GIS Approach

Science.gov (United States)

Topmiller, Michael; Jacquez, Farrah; Vissman, Aaron T.; Raleigh, Kevin; Miller-Francis, Jenni

2014-01-01

Mapping approaches offer great potential for community-based participatory researchers interested in displaying youth perceptions and advocating for change. We describe a multi-layered approach for gaining local knowledge of neighborhood environments that engages youth as co-researchers and active knowledge producers. By integrating geographic information systems (GIS) with environmental audits, an interactive focus group, and sketch mapping, the approach provides a place-based understanding of physical activity resources from the situated experience of youth. Youth report safety and a lack of recreational resources as inhibiting physical activity. Maps reflecting youth perceptions aid policy-makers in making place-based improvements for youth neighborhood environments. PMID:25423245

MACCIS 2.0 - An Architecture Description Framework for Technical Infostructures and Their Enterprise Environment

National Research Council Canada - National Science Library

Elvesaeter, Brian; Neple, Tor; Aagedal, Jan O; Rolfsen, Rolf K; Stensli, Ole-Oevind

2004-01-01

This paper presents the MACCIS 2.0 framework. MACCIS is an architecture description framework that defines architectural artefacts that are used to describe technical information infrastructures (infostructures...

Development of Landscape Architecture through Geo-eco-tourism in Tropical Karst Area to Avoid Extractive Cement Industry for Dignified and Sustainable Environment and Life

Science.gov (United States)

Cahyanti, Pita A. B.; Agus, Cahyono

2017-08-01

Karst areas in Indonesia amounted to 154,000 km2, potentially for extractive cement and wall paint industries. Exploitation of karst caused serious problems on the environment, health and social culture of the local community. Even though, karst region as a natural and cultural world heritage also have potential environmental services such as water resources, carbon sink, biodiversity, unique landscapes, natural caves, natural attractions, archaeological sites and mystic areas. Landscape architectural management of in the concept of blue revolution through the empowerment of land resources (soil, water, minerals) and biological resources (plant, animal, human), not only have adding value of economy aspect but also our dignified and sustainable environment and life through health, environmental, social, cultural, technological and management aspects. Geo-eco-tourism offers the efficiency of investment, increased creative innovation, increased funding, job creation, social capital development, stimulation of the socio-entrepreneurship in community. Community based geo-eco-tourism in Gunung Kidul Yogyakarta rapidly growing lately due to the local government banned the exploitation of karst. Landscape architecture at the caves, white sand beaches, cliffs in karst areas that beautiful, artistic and have special rare natural architecture form of stalactite and stalagmite, become the new phenomenal interested object of geo-eco-tourism. Many hidden nature objects that had been deserted and creepy could be visited by many local and foreign tourists. Landscape architectural management on hilltops with a wide view of the universe and fresh, sunset and sunrise, the clouds country are a rare sight for modern community. Local cultural attractions, local culinary, home stay with local communities will be an added attraction, but the infrastructure and human resources should be developed. Traveler photographs that widespread rapidly through social media and mass media became a

Architecture on Architecture

DEFF Research Database (Denmark)

Olesen, Karen

2016-01-01

that is not scientific or academic but is more like a latent body of data that we find embedded in existing works of architecture. This information, it is argued, is not limited by the historical context of the work. It can be thought of as a virtual capacity – a reservoir of spatial configurations that can...... correlation between the study of existing architectures and the training of competences to design for present-day realities.......This paper will discuss the challenges faced by architectural education today. It takes as its starting point the double commitment of any school of architecture: on the one hand the task of preserving the particular knowledge that belongs to the discipline of architecture, and on the other hand...

A multi-environment dataset for activity of daily living recognition in video streams.

Science.gov (United States)

Borreo, Alessandro; Onofri, Leonardo; Soda, Paolo

2015-08-01

Public datasets played a key role in the increasing level of interest that vision-based human action recognition has attracted in last years. While the production of such datasets has been influenced by the variability introduced by various actors performing the actions, the different modalities of interactions with the environment introduced by the variation of the scenes around the actors has been scarcely took into account. As a consequence, public datasets do not provide a proper test-bed for recognition algorithms that aim at achieving high accuracy, irrespective of the environment where actions are performed. This is all the more so, when systems are designed to recognize activities of daily living (ADL), which are characterized by a high level of human-environment interaction. For that reason, we present in this manuscript the MEA dataset, a new multi-environment ADL dataset, which permitted us to show how the change of scenario can affect the performances of state-of-the-art approaches for action recognition.

Microgrids architectures and control

CERN Document Server

Hatziargyriou, Nikos

2014-01-01

Microgrids are the most innovative area in the electric power industry today. Future microgrids could exist as energy-balanced cells within existing power distribution grids or stand-alone power networks within small communities. A definitive presentation on all aspects of microgrids, this text examines the operation of microgrids - their control concepts and advanced architectures including multi-microgrids. It takes a logical approach to overview the purpose and the technical aspects of microgrids, discussing the social, economic and environmental benefits to power system operation. The bo

Exploring Relationships between Canopy Architecture, Light Distribution, and Photosynthesis in Contrasting Rice Genotypes Using 3D Canopy Reconstruction

Directory of Open Access Journals (Sweden)

Alexandra J. Burgess

2017-05-01

Full Text Available The arrangement of leaf material is critical in determining the light environment, and subsequently the photosynthetic productivity of complex crop canopies. However, links between specific canopy architectural traits and photosynthetic productivity across a wide genetic background are poorly understood for field grown crops. The architecture of five genetically diverse rice varieties—four parental founders of a multi-parent advanced generation intercross (MAGIC population plus a high yielding Philippine variety (IR64—was captured at two different growth stages using a method for digital plant reconstruction based on stereocameras. Ray tracing was employed to explore the effects of canopy architecture on the resulting light environment in high-resolution, whilst gas exchange measurements were combined with an empirical model of photosynthesis to calculate an estimated carbon gain and total light interception. To further test the impact of different dynamic light patterns on photosynthetic properties, an empirical model of photosynthetic acclimation was employed to predict the optimal light-saturated photosynthesis rate (Pmax throughout canopy depth, hypothesizing that light is the sole determinant of productivity in these conditions. First, we show that a plant type with steeper leaf angles allows more efficient penetration of light into lower canopy layers and this, in turn, leads to a greater photosynthetic potential. Second the predicted optimal Pmax responds in a manner that is consistent with fractional interception and leaf area index across this germplasm. However, measured Pmax, especially in lower layers, was consistently higher than the optimal Pmax indicating factors other than light determine photosynthesis profiles. Lastly, varieties with more upright architecture exhibit higher maximum quantum yield of photosynthesis indicating a canopy-level impact on photosynthetic efficiency.

PLURALITY AND DIVERSITY IN ARCHITECTURAL AND URBAN RESEARCH

Directory of Open Access Journals (Sweden)

Ashraf M. Salama

2017-07-01

Full Text Available Demonstrating the essence of the journal as a truly international platform that covers issues of interest and concern to the global academic and professional community, this issue of Archnet-IJAR, volume 11, issue # 2, July 2017 includes various topics that manifest plurality and diversity as inherent qualities of architectural and urban research published in the journal.  Topics include architectural education and design studio teaching, urban and rural slums, heritage and historic environments in various contexts, participatory planning and the charrette process, assessment of public spaces and plazas, and human perception of the built environment. These topics are debated and analytically discussed within cities, settlements, and urban environments in Bahrain, Bangladesh, California-USA, Libya, Scotland, and Spain. The issue also includes three papers selected from the Fifth Architectural Jordanian International Conference – 1-3 November 2016, which uniquely speak to the context of Jordan and the wider Middle East. The edition ends with a book review that highlights emerging issues related to border landscapes and social ecologies.

Smartphone-Based Indoor Integrated WiFi/MEMS Positioning Algorithm in a Multi-Floor Environment

Directory of Open Access Journals (Sweden)

Zengshan Tian

2015-03-01

Full Text Available Indoor positioning in a multi-floor environment by using a smartphone is considered in this paper. The positioning accuracy and robustness of WiFi fingerprinting-based positioning are limited due to the unexpected variation of WiFi measurements between floors. On this basis, we propose a novel smartphone-based integrated WiFi/MEMS positioning algorithm based on the robust extended Kalman filter (EKF. The proposed algorithm first relies on the gait detection approach and quaternion algorithm to estimate the velocity and heading angles of the target. Second, the velocity and heading angles, together with the results of WiFi fingerprinting-based positioning, are considered as the input of the robust EKF for the sake of conducting two-dimensional (2D positioning. Third, the proposed algorithm calculates the height of the target by using the real-time recorded barometer and geographic data. Finally, the experimental results show that the proposed algorithm achieves the positioning accuracy with root mean square errors (RMSEs less than 1 m in an actual multi-floor environment.

Low-Cost Transceiver Architectures for 60 GHz Ultra Wideband WLANs

Directory of Open Access Journals (Sweden)

S. O. Tatu

2009-01-01

Full Text Available Millimeter-wave multiport transceiver architectures dedicated to 60 GHz UWB short-range communications are proposed in this paper. Multi-port circuits based on 90° hybrid couplers are intensively used for phased antenna array, millimeter-wave modulation and down-conversion, as a low-cost alternative to the conventional architecture. This allows complete integration of circuits including antennas, in planar technology, on the same substrate, improving the overall transceiver performances.

Prediction of fibre architecture and adaptation in diseased carotid bifurcations.

LENUS (Irish Health Repository)

Creane, Arthur

2011-12-01

Many studies have used patient-specific finite element models to estimate the stress environment in atherosclerotic plaques, attempting to correlate the magnitude of stress to plaque vulnerability. In complex geometries, few studies have incorporated the anisotropic material response of arterial tissue. This paper presents a fibre remodelling algorithm to predict the fibre architecture, and thus anisotropic material response in four patient-specific models of the carotid bifurcation. The change in fibre architecture during disease progression and its affect on the stress environment in the plaque were predicted. The mean fibre directions were assumed to lie at an angle between the two positive principal strain directions. The angle and the degree of dispersion were assumed to depend on the ratio of principal strain values. Results were compared with experimental observations and other numerical studies. In non-branching regions of each model, the typical double helix arterial fibre pattern was predicted while at the bifurcation and in regions of plaque burden, more complex fibre architectures were found. The predicted change in fibre architecture in the arterial tissue during plaque progression was found to alter the stress environment in the plaque. This suggests that the specimen-specific anisotropic response of the tissue should be taken into account to accurately predict stresses in the plaque. Since determination of the fibre architecture in vivo is a difficult task, the system presented here provides a useful method of estimating the fibre architecture in complex arterial geometries.

Information security architecture an integrated approach to security in the organization

CERN Document Server

Killmeyer, Jan

2000-01-01

An information security architecture is made up of several components. Each component in the architecture focuses on establishing acceptable levels of control. These controls are then applied to the operating environment of an organization. Functionally, information security architecture combines technical, practical, and cost-effective solutions to provide an adequate and appropriate level of security.Information Security Architecture: An Integrated Approach to Security in the Organization details the five key components of an information security architecture. It provides C-level executives

Roadmap to the SRS computing architecture