Contributions to the 14th IEEE/NPSS Symposium on fusion engineering

International Nuclear Information System (INIS)

Navarro, A.P.; Almoguera, L.; Alonso Gozalo, J.; Alonso Candenas, J.; Blaumoser, M.

1992-01-01

Three communications about the TJ-II device, under construction at CIEMAT with preferential support from EURATOM, were presented to the 14th IEEE/NPSS Symposium on Fusion Engineering and are collected in this report. The first one describes in detail the device and its present status of design and construction. The remaining two deal with the two most critical components of the project: the vacuum vessel and the central hard conductor. (author) 16 fig. 16 ref

The IEEE-SA patent policy update under the lens of EU competition law

NARCIS (Netherlands)

Kanevskaia, Olia; Zingales, Nicolo

2016-01-01

In 2015, the Institute of Electrical and Electronics Engineers (IEEE) Standardization Association made some controversial changes to its patent policy. The changes include a recommended method of calculation of FRAND royalty rates, and a request to members holding a standard essential patent (SEP)

Coexistence of IEEE 802.11b/g WLANs and IEEE 802.15.4 WSNs : Modeling and Protocol Enhancements

NARCIS (Netherlands)

Yuan, W.

2011-01-01

As an emerging short-range wireless technology, IEEE 802.15.4/ZigBee Wireless Sensor Networks (WSNs) are increasingly used in the fields of home control, industrial control, consumer electronics, energy management, building automation, telecom services, personal healthcare, etc. IEEE

IEEE 845 - a proposed guideline for use of human factors in design and retrofit design of nuclear power plants

International Nuclear Information System (INIS)

Schurman, D.L.

1987-01-01

This paper describes the development and content of the Institute of Electrical and Electronics Engineers (IEEE) Standard 845. This guide was developed by Working Group 7.2 of Subcommittee 7 of the Nuclear Power Engineering Committee of the Power Engineering Society of the IEEE. The guide has been approved by the Nuclear Power Engineering Committee (NPEC) and is now in the standards development and approval process. The guide is the first standards action approved by the NPEC of IEEE and is presented here to obtain wider peer response to its content. The guide provides a systematic framework for selection of human factors techniques and for the use of those techniques. The guide also provides a list of commonly used human factors techniques, along with a commentary about cost, ease of use, and other characteristics of each of the techniques. The guide is written with the project engineer and design engineer in mind. Thus, the guide attempts to provide a basis for the systematic selection of human factors techniques for various purposes and guidance regarding which of these techniques is likely to require the assistance of a human factors expert to apply

Editorial for IEEE Transactions on Power Electronics, January 2013

DEFF Research Database (Denmark)

Blaabjerg, Frede; Lehman, Brad

2013-01-01

should increase the impact factor of the IEEE TRANSACTIONS ON POWER ELECTRONICS (TPEL). In 2007, TPEL published 2600 pages, and it has gradually been increased to 4000 pages in 2011, 5000 pages in 2012, and 5500 pages are projected for 2013. We have decided to publish 12 printed issues so every month...... a new issue will be printed. A graph is provided showing the number of regular papers received in the past years as well as the number of published pages in the TPEL. Finally they note that in 2008, TPEL obtained a record high value for the impact factor (as shown in a figure) but in 2009 it was reduced...... the papers to be read over a longer time span; 2) Web of Science (ISI Thomsen Reuter) began to register new power electronics conferences in their database, and citations from conferences counts and contributes to a higher impact factor....

IEEE 693 seismic qualification of composites for substation high-voltage equipment

Energy Technology Data Exchange (ETDEWEB)

Schiff, A.J. [Precision Measurement Instruments, Los Altos Hills, CA (United States); Kempner, L.Jr. [Bonneville Power Administration, Vancouver, BC (Canada)

2004-07-01

Standard 693-1997 of the Institute of Electrical and Electronic Engineers (IEEE) is the recommended practice for seismic design of substations. It represents a significant improvement in the way the power industry seismically qualifies substation high-voltage equipment. This paper described the use of IEEE Standard 693 for hollow-core composite insulators that are used on high-voltage transformers and demonstrated that changes are warranted. The following four failure modes associated with the composite insulator were discussed: bond degradation, bond failure, tube degradation and tube layer delamination. The authors evaluated the IEEE 693 qualification procedure of time history shake-table and static-pull tests and were concerned about acceptance criteria. It was shown that acceptance criteria are not valid for qualifying hollow-core composites and that static-pull tests are needed after the vibration qualification tests are completed. It was suggested that more research is warranted to determine if bonding at the top part of the flange can be eliminated, thereby eliminating bond degradation. The resulting increase in system damping would improve the dynamic response of the unit. 1 ref., 10 figs.

IEEE Smart Grid Series of Standards IEEE 2030 (Interoperability) and IEEE 1547 (Interconnection) Status: Preprint

Energy Technology Data Exchange (ETDEWEB)

Basso, T.; DeBlasio, R.

2012-04-01

The IEEE American National Standards smart grid publications and standards development projects IEEE 2030, which addresses smart grid interoperability, and IEEE 1547TM, which addresses distributed resources interconnection with the grid, have made substantial progress since 2009. The IEEE 2030TM and 1547 standards series focus on systems-level aspects and cover many of the technical integration issues involved in a mature smart grid. The status and highlights of these two IEEE series of standards, which are sponsored by IEEE Standards Coordinating Committee 21 (SCC21), are provided in this paper.

IEEE International Symposium on Biomedical Imaging.

Science.gov (United States)

2017-01-01

The IEEE International Symposium on Biomedical Imaging (ISBI) is a scientific conference dedicated to mathematical, algorithmic, and computational aspects of biological and biomedical imaging, across all scales of observation. It fosters knowledge transfer among different imaging communities and contributes to an integrative approach to biomedical imaging. ISBI is a joint initiative from the IEEE Signal Processing Society (SPS) and the IEEE Engineering in Medicine and Biology Society (EMBS). The 2018 meeting will include tutorials, and a scientific program composed of plenary talks, invited special sessions, challenges, as well as oral and poster presentations of peer-reviewed papers. High-quality papers are requested containing original contributions to the topics of interest including image formation and reconstruction, computational and statistical image processing and analysis, dynamic imaging, visualization, image quality assessment, and physical, biological, and statistical modeling. Accepted 4-page regular papers will be published in the symposium proceedings published by IEEE and included in IEEE Xplore. To encourage attendance by a broader audience of imaging scientists and offer additional presentation opportunities, ISBI 2018 will continue to have a second track featuring posters selected from 1-page abstract submissions without subsequent archival publication.

77 FR 50726 - Software Requirement Specifications for Digital Computer Software and Complex Electronics Used in...

Science.gov (United States)

2012-08-22

... Computer Software and Complex Electronics Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear...-1209, ``Software Requirement Specifications for Digital Computer Software and Complex Electronics used... Electronics Engineers (ANSI/IEEE) Standard 830-1998, ``IEEE Recommended Practice for Software Requirements...

Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

CERN Document Server

Land, Susan K; Walz, John W

2012-01-01

Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

Architectural and Functional Design and Evaluation of E-Learning VUIS Based on the Proposed IEEE LTSA Reference Model.

Science.gov (United States)

O'Droma, Mairtin S.; Ganchev, Ivan; McDonnell, Fergal

2003-01-01

Presents a comparative analysis from the Institute of Electrical and Electronics Engineers (IEEE) Learning Technology Standards Committee's (LTSC) of the architectural and functional design of e-learning delivery platforms and applications, e-learning course authoring tools, and learning management systems (LMSs), with a view of assessing how…

IEEE 1547 and 2030 Standards for Distributed Energy Resources Interconnection and Interoperability with the Electricity Grid

Energy Technology Data Exchange (ETDEWEB)

Basso, T.

2014-12-01

Public-private partnerships have been a mainstay of the U.S. Department of Energy and the National Renewable Energy Laboratory (DOE/NREL) approach to research and development. These partnerships also include technology development that enables grid modernization and distributed energy resources (DER) advancement, especially renewable energy systems integration with the grid. Through DOE/NREL and industry support of Institute of Electrical and Electronics Engineers (IEEE) standards development, the IEEE 1547 series of standards has helped shape the way utilities and other businesses have worked together to realize increasing amounts of DER interconnected with the distribution grid. And more recently, the IEEE 2030 series of standards is helping to further realize greater implementation of communications and information technologies that provide interoperability solutions for enhanced integration of DER and loads with the grid. For these standards development partnerships, for approximately $1 of federal funding, industry partnering has contributed $5. In this report, the status update is presented for the American National Standards IEEE 1547 and IEEE 2030 series of standards. A short synopsis of the history of the 1547 standards is first presented, then the current status and future direction of the ongoing standards development activities are discussed.

IEEE guide for general principles of reliability analysis of nuclear power generating station protection systems

International Nuclear Information System (INIS)

Anon.

1975-01-01

Presented is the Institute of Electrical and Electronics Engineers, Inc. (IEEE) guide for general principles of reliability analysis of nuclear power generating station protection systems. The document has been prepared to provide the basic principles needed to conduct a reliability analysis of protection systems. Included is information on qualitative and quantitative analysis, guides for failure data acquisition and use, and guide for establishment of intervals

14th ACIS/IEEE International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing

CERN Document Server

Studies in Computational Intelligence : Volume 492

2013-01-01

This edited book presents scientific results of the 14th ACIS/IEEE International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD 2013), held in Honolulu, Hawaii, USA on July 1-3, 2013. The aim of this conference was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas, research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the 17 outstanding papers from those papers accepted for presentation at the conference.  

15th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing

CERN Document Server

2015-01-01

This edited book presents scientific results of 15th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD 2014) held on June 30 – July 2, 2014 in Las Vegas Nevada, USA. The aim of this conference was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas, research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the 13 outstanding papers from those papers accepted for presentation at the conference.

Get certified a guide to wireless communication engineering technologies

CERN Document Server

Ahson, Syed A

2009-01-01

The Institute of Electrical and Electronics Engineers (IEEE) Communications Society designed the IEEE wireless communication engineering technologies (WCET) certification program to address the wireless industry's growing need for communications professionals with practical problem-solving skills in real-world situations. Individuals who achieve this prestigious certification are recognized as possessing the required knowledge, skill, and abilities to meet wireless challenges in various industry, business, corporate, and organizational settings. Presenting contributions from 50 wireless commun

6th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing

CERN Document Server

2016-01-01

This edited book presents scientific results of the 16th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD 2015) which was held on June 1 – 3, 2015 in Takamatsu, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

17th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing

CERN Document Server

SNPD 2016

2016-01-01

This edited book presents scientific results of the 17th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (SNPD 2016) which was held on May 30 - June 1, 2016 in Shanghai, China. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

Proceedings of the Joint Conference of Australasian College of Physical Scientists and Engineers in Medicine and IEAust College of Biomedical Engineers; Asia/Pacific Region of the IEEE Engineering in Medicine and Biology Society

International Nuclear Information System (INIS)

1996-01-01

This is a celebration of the centenary of Rontgen''s discovery of Xrays. It is also the 50th anniversary of the first hospital physicist appointment in New Zealand. The historical element of the programme will complement the emphasis on current applications of the physical and engineering sciences to medicine and an anticipation of future developments. For the first time the Australasian College of Physical Scientists and Engineers in Medicine, together with the IEAust College of Biomedical Engineers, are joined by the Asia/Pacific Region of the IEEE Engineering in Medicine and Biology Society to make this a truly international conference. The proceedings include many papers on radiology and radiotherapy

IEEE guide for planning of pre-operational testing programs for class 1E power systems for nuclear-power generating stations

International Nuclear Information System (INIS)

Anon.

1976-01-01

The Institute of Electrical and Electronics Engineers (IEEE) guide for pre-operational testing of Class 1E power systems for nuclear-power generating stations is presented. The guidelines apply to power systems both ac and dc supplies but not to the equipment which utilizes the ac and dc power. The pre-operational tests are performed after appropriate construction tests

Guide to state-of-the-art electron devices

CERN Document Server

2013-01-01

Concise, high quality and comparative overview of state-of-the-art electron device development, manufacturing technologies and applications Guide to State-of-the-Art Electron Devices marks the 60th anniversary of the IEEE Electron Devices Committee and the 35th anniversary of the IEEE Electron Devices Society, as such it defines the state-of-the-art of electron devices, as well as future directions across the entire field. Spans full range of electron device types such as photovoltaic devices, semiconductor manufacturing and VLSI technology and circuits, covered by IEEE Electron and Devices Society Contributed by internationally respected members of the electron devices community A timely desk reference with fully-integrated colour and a unique lay-out with sidebars to highlight the key terms Discusses the historical developments and speculates on future trends to give a more rounded picture of the topics covered A valuable resource R&D managers; engineers in the semiconductor industry; applied scientists...

Engineered phages for electronics.

Science.gov (United States)

Cui, Yue

2016-11-15

Phages are traditionally widely studied in biology and chemistry. In recent years, engineered phages have attracted significant attentions for functionalization or construction of electronic devices, due to their specific binding, catalytic, nucleating or electronic properties. To apply the engineered phages in electronics, these are a number of interesting questions: how to engineer phages for electronics? How are the engineered phages characterized? How to assemble materials with engineered phages? How are the engineered phages micro or nanopatterned? What are the strategies to construct electronics devices with engineered phages? This review will highlight the early attempts to address these questions and explore the fundamental and practical aspects of engineered phages in electronics, including the approaches for selection or expression of specific peptides on phage coat proteins, characterization of engineered phages in electronics, assembly of electronic materials, patterning of engineered phages, and construction of electronic devices. It provides the methodologies and opens up ex-cit-ing op-por-tu-ni-ties for the development of a variety of new electronic materials and devices based on engineered phages for future applications. Copyright © 2016 Elsevier B.V. All rights reserved.

Photonics and Web Engineering 2011, International Journal of Electronics and Telecommunication, vol.57, no 3, pp.421-428, September 2011

CERN Document Server

Romaniuk, R S

2011-01-01

The paper presents a digest of chosen technical work results shown by young researchers from different technical universities in this country during the SPIE-IEEE Wilga 2011 symposium on Photonics and Web Engineering. Topical tracks of the symposium embraced, among others, nanomaterials and nanotechnologies for photonics and telecom, sensory and nonlinear optical fibers, object oriented design of hardware, photonic metrology, optoelectronics and photonics applications, photonicselectronics co-design, optoelectronic and electronic systems for telecom, astronomy and high energy physics experiments, JET and pi-of-the sky experiments development. The symposium is an annual summary in the development of numerable Ph.D. theses carried out in this country in the area of advanced electronic and photonic systems. It is also an occasion for young researchers to meet together in a large group (under the patronage of IEEE) spanning the whole country with guests from this part of Europe. A digest of Wilga references is pr...

Women in biomedical engineering and health informatics and its impact on gender representation for accepted publications at IEEE EMBC 2007.

Science.gov (United States)

McGregor, Carolyn; Smith, Kathleen P; Percival, Jennifer

2008-01-01

The study of women within the professions of Engineering and Computer Science has consistently been found to demonstrate women as a minority within these professions. However none of that previous work has assessed publication behaviours based on gender. This paper presents research findings on gender distribution of authors of accepted papers for the IEEE Engineering and Medicine Society annual conference for 2007 (EMBC '07) held in Lyon, France. This information is used to present a position statement of the current state of gender representation for conference publication within the domain of biomedical engineering and health informatics. Issues in data preparation resulting from the lack of inclusion of gender in information gathered from accepted authors are presented and discussed.

Electronics engineer's reference book

CERN Document Server

Turner, L W

1976-01-01

Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

Evaluation of the Effects of Hidden Node Problems in IEEE 802.15.7 Uplink Performance.

Science.gov (United States)

Ley-Bosch, Carlos; Alonso-González, Itziar; Sánchez-Rodríguez, David; Ramírez-Casañas, Carlos

2016-02-06

In the last few years, the increasing use of LEDs in illumination systems has been conducted due to the emergence of Visible Light Communication (VLC) technologies, in which data communication is performed by transmitting through the visible band of the electromagnetic spectrum. In 2011, the Institute of Electrical and Electronics Engineers (IEEE) published the IEEE 802.15.7 standard for Wireless Personal Area Networks based on VLC. Due to limitations in the coverage of the transmitted signal, wireless networks can suffer from the hidden node problems, when there are nodes in the network whose transmissions are not detected by other nodes. This problem can cause an important degradation in communications when they are made by means of the Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) access control method, which is used in IEEE 802.15.7 This research work evaluates the effects of the hidden node problem in the performance of the IEEE 802.15.7 standard We implement a simulator and analyze VLC performance in terms of parameters like end-to-end goodput and message loss rate. As part of this research work, a solution to the hidden node problem is proposed, based on the use of idle patterns defined in the standard. Idle patterns are sent by the network coordinator node to communicate to the other nodes that there is an ongoing transmission. The validity of the proposed solution is demonstrated with simulation results.

Return of IEEE Std 627 and its Value to Equipment Qualification Programs

International Nuclear Information System (INIS)

Horvath, D.A.

2012-01-01

IEEE Std 627 ''Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating Stations'' was issued to more generically establish qualification requirements in the form of a high level umbrella document. Efforts on this standard began in late 1975 at the request of the IEEE Nuclear Standards Management Board. In 1977 a joint ASME/IEEE agreement established responsibility for qualification and quality assurance standards preparation. ASME accepted responsibility for Quality Assurance and IEEE for qualification. In accordance with that agreement, IEEE completed the generic qualification standard in 1980. This document provided high level approaches, criteria, guidance, and principles for qualification of both electrical and mechanical equipment that at that time appeared in no other industry standard. IEEE Std 627-1980 was later reaffirmed in 1996. In 1986, ASME's Board on Nuclear Codes and Standards directed its Committee on Qualification of Mechanical Equipment (QME) to develop a standard for qualifying mechanical equipment. This task was completed in several parts during the time frame from 1992 to 1994. Partly in response to this activity, IEEE Std 627 was withdrawn in 2002. Later although withdrawn, it was found that IEEE Std 627 was continuing to be used and referenced by many entities both in the US and other countries including in ASME's QME-1-2002 ''Qualification of Active Mechanical Equipment Used in Nuclear Power Plants'', US NRC's NUREG-0800 Standard Review Plan Section 3.11, at least one reactor vendor's Design Certification Document (DCD), several international licensing documents, and elsewhere. As a result, in 2007, the IEEE Standards Board authorized Working Group 2.10 of Subcommittee 2 (Qualification) of the Power and Energy Society's Nuclear Power Engineering Committee to resurrect and update IEEE Std 627-1980 (Reaff 1996). The result was the culmination IEEE Std 627 in 2010. This paper will report on the eight improvements made

Relevance of First-Tier, Peer-Reviewed Journals in the Tenure and Promotion Process at Non-Doctoral Granting Engineering Institutions

Directory of Open Access Journals (Sweden)

Amanda S. Florio

2012-02-01

Full Text Available The IEEE (formerly the Institute of Electrical and Electronics Engineers is the world's largest professional society dedicated to the advancement of technology. While it is indeed growing into multiple technology areas, the IEEE is still first an organization of electrical, electronics, and computer engineering professionals. It has over 400,000 members and publishes nearly 100, first-tier, peer-reviewed journals. As such a large purveyor of scholarly works, engineering faculty at almost all academic institutions (doctoral granting and non-doctoral granting are familiar with the IEEE. For this reason, the IEEE makes an excellent case study for the relevance of first-tier, peer-reviewed journals in the tenure and promotion process at non-doctoral granting engineering institutions. In our work, we surveyed editors of the 97 IEEE journals. 93% of respondents indicated that 10% or less of their submissions were from non-academic institutions. None (0% of the respondents believed that the number of non-doctoral granting institution submissions would be increasing over the next three years. In fact, a majority of the respondents (55% see the number of non-doctoral granting institution submissions decreasing in the same time frame. To correlate this data, we examined a sample of 2,099 articles published in the first issue of each IEEE journal in 2009. 357 (17% of these 2,099 articles were authored by individuals from academic institutions in the United States. Of the 357, only 35 were published by individuals from non-doctoral granting institutions (1.7%, with only 8 (0.38% from institutions where a bachelor degree is the highest offered.

Electric power substations engineering

CERN Document Server

2003-01-01

This book covers all aspects of substations, from the initial concept to design, automation, operation, and physical and cyber security. Written by members of the Institute of Electrical and Electronic Engineers (IEEE) Power Engineering Society (PES) Substations Committee, each section provides a tutorial and includes references for further reading and study. The authors use photographs and graphics to help the reader understand the material. Exploring the most recent technological developments regarding industry practice and standards, the book provides an extensive overview of substations th

Active Channel Reservation for Coexistence Mechanism (ACROS) for IEEE 802.15.4 and IEEE 802.11

Science.gov (United States)

Shin, Soo Young; Woo, Dong Hyuk; Lee, Jong Wook; Park, Hong Seong; Kwon, Wook Hyun

In this paper, a coexistence mechanism between IEEE 802.15.4 and IEEE 802.11b, Active Channel Reservation for cOexiStence (ACROS), is proposed. The key idea underlining ACROS is to reserve the channel for IEEE 802.15.4 transmission, where IEEE 802.11 transmissions are forbidden. The request-to-send (RTS)/clear-to send (CTS) mechanism within IEEE 802.11 is used to reserve a channel. The proposed ACROS mechanism is implemented into a PC based prototype. The embedded version of ACROS is also developed to mitigate the timing drift problem in the PC-based ACROS. The efficiency of ACROS is shown using the throughput and packet error rate achieved in actual experiments.

Software Engineering Education Directory

Science.gov (United States)

1990-04-01

and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

Generating GraphML XML Files for Graph Visualization of Architectures and Event Traces for the Monterey Phoenix Program

Science.gov (United States)

2012-09-01

ebrary) Engineering Village 2 (Engineering Village 2) ENGnetBASE: Engineering Handbooks Online (CRCnetBASE) IEEE /IET Electronic Library ( IEEE Xplore ...Integrated Development Environment IEEE Institute of Electrical and Electronics Engineers ISCA International Society for Computers and Their Applications...Object-Oriented Systems. Addison-Wesley. Bowen, J., & Hinchey, M. (1995). Seven more myths of formal methods. Software, IEEE , 34-41. Brandes, U

An Italian Education: IEEE Pulse talks with Riccardo Pietrabissa, president of Italy's National Bioengineering Group, about Italian progress and challenges in biomedical engineering education.

Science.gov (United States)

Pietrabissa, Riccardo; Reynolds, Pamela

2015-01-01

From Leonardo da Vinci's designs for ball bearings to the incredible engineering wizardry behind the Ferrari, the inventive, inquisitive, and ingenious spirit of the engineer has always lived--and thrived--in Italy. From education to research to product development, Italy has always been regarded as an engineering leader. But does this apply to biomedical engineering (BME)? Despite many successes, questions loom, as they do at engineering schools worldwide. Concerns such as whether BME programs are providing students with enough focused, practical, hands-on training remain at the forefront, as does the question of whether graduates will be able to find jobs in industry after university studies are over. Here, IEEE Pulse explores these topics with Riccardo Pietrabissa, president of the Gruppo Nazionale di Bioingegneria (National Bioengineering Group) and a full professor in the Department of Chemistry, Materials, and Chemical Engineering at Politecnico di Milano.

2012 IEEE Vehicular Networking Conference (VNC)

NARCIS (Netherlands)

Altintas, Onur; Chen, Wai; Heijenk, Geert; Oh, Hyun Seo; Chung, Jong-Moon; Dressler, Falko; Kargl, Frank; Pau, Giovanni; Schoch, Elmar

2012-01-01

On behalf of the Organizing Committee, we would like to welcome you to the fourth edition of the IEEE Vehicular Networking Conference in Seoul, Korea. IEEE VNC is a unique conference sponsored by both IEEE Communications Society and Intelligent Transportation Systems Society. It brings together

Simulasi Kinerja Jaringan Nirkabel IEEE-802.11a dan IEEE-802.11g Menggunakan NS-2

Directory of Open Access Journals (Sweden)

Helm Fitriawan

2014-03-01

Full Text Available Wireless network uses transmission media based on radio waves. This type of networks is mainly useddue to its efficiency and mobility in data exchanging. This paper reports the modeling and simulation of wirelessnetworks based on Cisco Aironet 1130ag access point devices with IEEE 802.11a and IEEE 802.11g standards. Themodeling and simulation are performed using network simulator version 2 (NS-2 that is installed on operationsystem Linux Ubuntu v.10.10. The NS-2 is commonly used and works well in numerous types of network simulation. From simulation, we obtain quality of service parameters by employing several simulation scenarios in terms ofnumber of nodes, distances, and packet data sizes. It can be concluded from simulation results that the IEEE 802.11gnetworks transfer data with better quality than those of IEEE 802.11a networks.  Furthermore, the IEEE 802.11gnetworks provide a higher throughput, with smaller amount of delay and packet loss percentage compared to thoseof IEEE 802.11a networks.

Throughput and delay analysis of IEEE 802.15.6-based CSMA/CA protocol.

Science.gov (United States)

Ullah, Sana; Chen, Min; Kwak, Kyung Sup

2012-12-01

The IEEE 802.15.6 is a new communication standard on Wireless Body Area Network (WBAN) that focuses on a variety of medical, Consumer Electronics (CE) and entertainment applications. In this paper, the throughput and delay performance of the IEEE 802.15.6 is presented. Numerical formulas are derived to determine the maximum throughput and minimum delay limits of the IEEE 802.15.6 for an ideal channel with no transmission errors. These limits are derived for different frequency bands and data rates. Our analysis is validated by extensive simulations using a custom C+ + simulator. Based on analytical and simulation results, useful conclusions are derived for network provisioning and packet size optimization for different applications.

Delay Analysis of GTS Bridging between IEEE 802.15.4 and IEEE 802.11 Networks for Healthcare Applications

Science.gov (United States)

Mišić, Jelena; (Sherman) Shen, Xuemin

2009-01-01

We consider interconnection of IEEE 802.15.4 beacon-enabled network cluster with IEEE 802.11b network. This scenario is important in healthcare applications where IEEE 802.15.4 nodes comprise patient's body area network (BAN) and are involved in sensing some health-related data. BAN nodes have very short communication range in order to avoid harming patient's health and save energy. Sensed data needs to be transmitted to an access point in the ward room using wireless technology with higher transmission range and rate such as IEEE 802.11b. We model the interconnected network where IEEE 802.15.4-based BAN operates in guaranteed time slot (GTS) mode, and IEEE 802.11b part of the bridge conveys GTS superframe to the 802.11b access point. We then analyze the network delays. Performance analysis is performed using EKG traffic from continuous telemetry, and we discuss the delays of communication due the increasing number of patients. PMID:19107184

Delay Analysis of GTS Bridging between IEEE 802.15.4 and IEEE 802.11 Networks for Healthcare Applications.

Science.gov (United States)

Misić, Jelena; Sherman Shen, Xuemin

2009-01-01

We consider interconnection of IEEE 802.15.4 beacon-enabled network cluster with IEEE 802.11b network. This scenario is important in healthcare applications where IEEE 802.15.4 nodes comprise patient's body area network (BAN) and are involved in sensing some health-related data. BAN nodes have very short communication range in order to avoid harming patient's health and save energy. Sensed data needs to be transmitted to an access point in the ward room using wireless technology with higher transmission range and rate such as IEEE 802.11b. We model the interconnected network where IEEE 802.15.4-based BAN operates in guaranteed time slot (GTS) mode, and IEEE 802.11b part of the bridge conveys GTS superframe to the 802.11b access point. We then analyze the network delays. Performance analysis is performed using EKG traffic from continuous telemetry, and we discuss the delays of communication due the increasing number of patients.

A coexistence model of IEEE 802.15.4 and IEEE 802.1 lbIg

NARCIS (Netherlands)

Yuan, Wei; Wang, Xiangyu; Linnartz, J.P.M.G.

2007-01-01

IEEE 802.15.4 was developed to meet the needs for low-rate wireless communication. However, due to its low power, IEEE 802.15.4 is potentially vulnerable to interference by other wireless technologies having much higher power and working in the same industrial, scientific, and medical (ISM) band

Relationship between IEEE Std. 7-4.3.2-1993 and ASME NQA-1, parts I and II revisions and the impact on nuclear power generating stations

International Nuclear Information System (INIS)

Blauw, R.J.

1996-01-01

Clear understanding of software related design control requirements is key to growth in the use of computers in nuclear power generating stations. Inconsistent terminology within the nuclear and software standards arena has impacted the ability of both nuclear station system engineers (i.e., the domain expert) to clearly communicate with the software/computer hardware experts. In order for computer development to occur both groups need to have a common terminology basis. Without this commonality, inappropriate application of requirements could result. This paper will present a overview of ongoing efforts within the Institute of Electrical and Electronics Engineers Nuclear Power Engineering Committee (IEEE NPEC) and the American Society of Mechanical Engineers Nuclear Quality Assurance (ASME NQA) Committee to develop this commonality

LEOS 2002: summer electronics and signal processing symposium

International Nuclear Information System (INIS)

Karadzhinov, Ljupcho; Ivanovski, Zoran

2002-01-01

LEOS 2002 was the first Macedonian symposium on electronics and signal processing. It was organized in recognition to a growing need to exchange the research results as well as to raise competent discussions among different research groups from both academic and industrial environment in Macedonia. The topics covered in this meeting were defined by the IEEE experts as follows: Power Electronics, Industrial Electronics, Signal Processing, Image and Video Processing, Instrumentation and Measurements, Engineering in Medicine and Biology, Electron Devices and Automatic Control. Papers were mainly from Macedonia, but there was one invited lecture

IEEE Std 101-1987: IEEE guide for the statistical analysis of thermal life test data

International Nuclear Information System (INIS)

Anon.

1992-01-01

This revision of IEEE Std 101-1972 describes statistical analyses for data from thermally accelerated aging tests. It explains the basis and use of statistical calculations for an engineer or scientist. Accelerated test procedures usually call for a number of specimens to be aged at each of several temperatures appreciably above normal operating temperatures. High temperatures are chosen to produce specimen failures (according to specified failure criteria) in typically one week to one year. The test objective is to determine the dependence of median life on temperature from the data, and to estimate, by extrapolation, the median life to be expected at service temperature. This guide presents methods for analyzing such data and for comparing test data on different materials

Newnes radio and electronics engineer's pocket book

CERN Document Server

Moorshead, H W; Perry, J

1978-01-01

Newnes Radio and Electronics Engineer's Pocket Book, Fifteenth Edition provides reference of the information relevant in radio and electronics engineering. The book presents tables, illustrations, and diagrams of various data used in radio and electronics engineering. The coverage of the text includes abbreviations and symbols, electrical equations, and code conversions. The text will be useful to engineers, technicians, and other professionals who require a reference about the different aspects of radio and electronics.

Performance comparison of IEEE 802.11g and IEEE 802.11n in the presence of interference from 802.15.4 networks

OpenAIRE

Masood, Syed Haani

2013-01-01

In this paper we compare the packet error rate (PER) and maximum throughput of IEEE 802.11n and IEEE 802.11g under interference from IEEE 802.15.4 by using MATLAB to simulate the IEEE PHY for 802.11n and 802.11g networks.

An Analog Computer for Electronic Engineering Education

Science.gov (United States)

Fitch, A. L.; Iu, H. H. C.; Lu, D. D. C.

2011-01-01

This paper describes a compact analog computer and proposes its use in electronic engineering teaching laboratories to develop student understanding of applications in analog electronics, electronic components, engineering mathematics, control engineering, safe laboratory and workshop practices, circuit construction, testing, and maintenance. The…

Introduction to electronic engineering I

International Nuclear Information System (INIS)

Kim, Bong Ryeol; Park, Han Gue; Lee, Tae Won; Choi, Gap Seok

1979-09-01

It deals with basic element of electronic engineering, which are an electric network such as alternating current voltage, distributed self, energy and power of an AC circuit, matrix, Tie-set and Cut-set, Fourier Transform and Laplace Transform, electromagnetics with vector theory, dot product and cross product, gradient, divergence static electricity, dielectric substance and capacity, boundary condition, resistance, magnetic field, magnetic circuit and electromagnetic field, electronic circuit including power circuit, amplification circuit, modulation and digital circuit, physical electronic engineering about movement of electron, semiconductor and integrated circuit.

Incorporating antenna beamswitching technique into drivers for IEEE802.11 WLAN devices

CSIR Research Space (South Africa)

Mofolo, M

2015-11-23

Full Text Available the beamswitching technique for switched parasitic array (SPA) and electronically steerable parasitic array radiator (ESPAR) antennas in the drivers for IEEE802.11 WLAN devices. The modifications of the open source drivers (ath5k and ath9k) to enable real...

Transient Stability Improvement of IEEE 9 Bus System Using Power World Simulator

Directory of Open Access Journals (Sweden)

Kaur Ramandeep

2016-01-01

Full Text Available The improvement of transient stability of power system was one of the most challenging research areas in power engineer.The main aim of this paper was transient stability analysis and improvement of IEEE 9 bus system. These studies were computed using POWER WORLD SIMULATOR. The IEEE 9 bus system was modelled in power world simulator and load flow studies were performed to determine pre-fault conditions in the system using Newton-Raphson method. The transient stability analysis was carried out using Runga method during three-phase balanced fault. For the improvement transient stability, the general methods adopted were fast acting exciters, FACT devices and addition of parallel transmission line. These techniques play an important role in improving the transient stability, increasing transmission capacity and damping low frequency oscillations.

Electronics engineer's reference book

CERN Document Server

Mazda, F F

1989-01-01

Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

Software And Systems Engineering Risk Management

Science.gov (United States)

2010-04-01

RSKM 2004 COSO Enterprise RSKM Framework 2006 ISO/IEC 16085 Risk Management Process 2008 ISO/IEC 12207 Software Lifecycle Processes 2009 ISO/IEC...1 Software And Systems Engineering Risk Management John Walz VP Technical and Conferences Activities, IEEE Computer Society Vice-Chair Planning...Software & Systems Engineering Standards Committee, IEEE Computer Society US TAG to ISO TMB Risk Management Working Group Systems and Software

Electron microscopy for Engineers

International Nuclear Information System (INIS)

Jones, I P

2009-01-01

This paper reviews the application of (mainly) Transmission Electron Microscopy (TEM) in an engineering context. The first two sections are TEM and chemical in nature; the final three sections are more general and include aspects of Scanning Electron Microscopy (SEM).

IEEE standard for qualifying class IE equipment for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1974-01-01

The Institute of Electrical and Electrical Engineers, Inc. (IEEE) standards for electrical equipment (Class IE) for nuclear power generating stations are given. The standards are to provide guidance for demonstrating and documenting the adequacy of electric equipment used in all Class IE and interface systems. Representative in containment design basis event conditions for the principal reactor types are included in the appendixes for guidance in enviromental simulation

Researching the roots of IEEE Region 8

NARCIS (Netherlands)

Bastiaans, M.J.

2013-01-01

This paper describes the preliminary steps towards the foundation and the early history of IRE Region 9 / IEEE Region 8. The information has been gathered mainly from the archives of the IEEE Benelux Section.

Problems and solutions in application of IEEE standards at Savannah River Site, Department of Energy (DOE) nuclear facilities

International Nuclear Information System (INIS)

Lee, Y.S.; Bowers, T.L.; Chopra, B.J.; Thompson, T.T.; Zimmerman, E.W.

1993-01-01

The Department of Energy (DOE) Nuclear Material Production Facilities at the Savannah River Site (SRS) were designed, constructed, and placed into operation in the early 1950's, based on existing industry codes/standards, design criteria, analytical procedures. Since that time, DOE has developed Orders and Polices for the planning, design and construction of DOE Nuclear Reactor Facilities which invoke or reference commercial nuclear reactor codes and standards. The application of IEEE reactor design requirements such as Equipment Qualification, Seismic Qualification, Single Failure Criteria, and Separation Requirement, to non-reactor facilities has been a problem since the IEEE reactor criteria do not directly confirm to the needs of non-reactor facilities. SRS Systems Engineering is developing a methodology for the application of IEEE Standards to non-reactor facilities at SRS

Extending Service Area of IEEE 802.11 Ad Hoc Networks

Science.gov (United States)

Choi, Woo-Yong

2012-06-01

According to the current IEEE 802.11 wireless LAN standards, IEEE 802.11 ad hoc networks have the limitation that all STAs (Stations) are in the one-hop transmission range of each other. In this paper, to alleviate the limitation of IEEE 802.11 ad hoc networks we propose the efficient method for selecting the most appropriate pseudo AP (Access Point) from among the set of ad hoc STAs and extending the service area of IEEE 802.11 ad hoc networks by the pseudo AP's relaying the internal traffic of IEEE 802.11 ad hoc networks. Numerical examples show that the proposed method significantly extends the service area of IEEE 802.11 ad hoc networks.

IEEE C37.82-1987: IEEE standard for the qualification of switchgear assemblies for Class 1E applications in nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This document describes the methods and requirements for qualifying switchgear assemblies for indoor areas outside of the containment in nuclear power generating stations. These assemblies include (1) metal-enclosed low-voltage power circuit breaker switchgear assemblies, as defined in ANSI/IEEE C37.20.1-1987, (2) metal-clad switchgear assemblies, as defined in ANSI/IEEE C37.20.2-1987, (3) metal-enclosed bus, as defined in ANSI/IEEE C37.23-1987, and (4) metal-enclosed interrupter switchgear assemblies, as defined in ANSI/IEEE C37.20.3-1987. The purpose of this document is to provide amplification of the general requirements of ANSI/IEEE Std 323-1983 as they apply to the specific features of Class 1E switchgear assemblies. Where differences exist between this document and ANSI/IEEE Std 323-1983, this document takes precedence insofar as switchgear assemblies are concerned

2012 International Conference on Electrical and Electronics Engineering

CERN Document Server

Chen, Suting; Wei, Zhanming; Xia, Jingming

2014-01-01

Unifying Electrical Engineering and Electronics Engineering is based on the Proceedings of the 2012 International Conference on Electrical and Electronics Engineering (ICEE 2012). This book collects the peer reviewed papers presented at the conference. The aim of the conference is to unify the two areas of Electrical and Electronics Engineering. The book examines trends and techniques in the field as well as theories and applications. The editors have chosen to include the following topics; biotechnology, power engineering, superconductivity circuits, antennas technology, system architectures and telecommunication.

2012 International Conference on Mechanical and Electronic Engineering

CERN Document Server

Lin, Sally; ICMEE2012; Advances in Mechanical and Electronic Engineering v.2

2012-01-01

This book includes the volume 2 of the proceedings of the 2012 International Conference on Mechanical and Electronic Engineering(ICMEE2012), held at June 23-24,2012 in Hefei, China. The conference provided a rare opportunity to bring together worldwide researchers who are working in the fields. This volume 2 is focusing on Mechatronic Engineering and Technology,  Electronic Engineering and Electronic Information Technology .

Fiber optics backbone for IEEE 802.3 networks

Science.gov (United States)

Shani, Ron

1990-01-01

In the last few years the IEEE 802.3 committee has developed fiber optics inter-repeater link standard called FOIRL. This standard defines the "Fiber Optics Media Access Unit" (FOMAU) which is used to connect two IEEE 802.3 repeaters that are up to 1Km apart. The IEEE 802.3 lOBaseF task force is currently standardizing a full F/O system in two directions: passive and active. The active approach is a compromise between the FOIRL (Asynchronous) approach and the Synchronous approach. As a result of this activity the IEEE 802.3 standard will define three different F/O interfaces and several devices that will not inter-operate. Such a standard will lower the credibility among the IEEE 802.3 user community, as customers will be confused amidst the many chapters and devices with no clear choice. This paper describes a method that can reduce the number of standards to two (passive and active), while proposing a solution for all the requirements of 802.3 F/O LAN. (The question of passive vs active approach will be discussed in this paper).

WILGA Photonics and Web Engineering, January 2012; EuCARD Sessions on HEP and Accelerator Technology

CERN Document Server

Romaniuk, R S

2012-01-01

Wilga Sessions on HEP experiments and accelerator technology were organized under the umbrella of the EU FP7 Project EuCARD – European Coordination for Accelerator Research and Development. The paper presents a digest of chosen technical work results shown by young researchers from technical universities during the SPIE-IEEE Wilga January 2012 Symposium on Photonics and Web Engineering. Topical tracks of the symposium embraced, among others, new technologies for photonics, sensory and nonlinear optical fibers, object oriented design of hardware, photonic metrology, optoelectronics and photonics applications, photonics-electronics co-design, optoelectronic and electronic systems for astronomy and high energy physics experiments, JET and pi-of-the sky experiments development. The symposium held two times a year is a summary in the development of numerable Ph.D. theses carried out in this country in the area of advanced electronic and photonic systems. It is also a great occasion for SPIE, IEEE, OSA and PSP st...

The scalable coherent interface, IEEE P1596

International Nuclear Information System (INIS)

Gustavson, D.B.

1990-01-01

IEEE P1596, the scalable coherent interface (formerly known as SuperBus) is based on experience gained while developing Fastbus (ANSI/IEEE 960--1986, IEC 935), Futurebus (IEEE P896.x) and other modern 32-bit buses. SCI goals include a minimum bandwidth of 1 GByte/sec per processor in multiprocessor systems with thousands of processors; efficient support of a coherent distributed-cache image of distributed shared memory; support for repeaters which interface to existing or future buses; and support for inexpensive small rings as well as for general switched interconnections like Banyan, Omega, or crossbar networks. This paper presents a summary of current directions, reports the status of the work in progress, and suggests some applications in data acquisition and physics

Space Electronic Test Engineering

Science.gov (United States)

Chambers, Rodney D.

2004-01-01

The Space Power and Propulsion Test Engineering Branch at NASA Glenn Research center has the important duty of controlling electronic test engineering services. These services include test planning and early assessment of Space projects, management and/or technical support required to safely and effectively prepare the article and facility for testing, operation of test facilities, and validation/delivery of data to customer. The Space Electronic Test Engineering Branch is assigned electronic test engineering responsibility for the GRC Space Simulation, Microgravity, Cryogenic, and Combustion Test Facilities. While working with the Space Power and Propulsion Test Engineering Branch I am working on several different assignments. My primary assignment deals with an electrical hardware unit known as Sunny Boy. Sunny Boy is a DC load Bank that is designed for solar arrays in which it is used to convert DC power form the solar arrays into AC power at 60 hertz to pump back into the electricity grid. However, there are some researchers who decided that they would like to use the Sunny Boy unit in a space simulation as a DC load bank for a space shuttle or even the International Space Station hardware. In order to do so I must create a communication link between a computer and the Sunny Boy unit so that I can preset a few of the limits (such power, set & constant voltage levels) that Sunny Boy will need to operate using the applied DC load. Apart from this assignment I am also working on a hi-tech circuit that I need to have built at a researcher s request. This is a high voltage analog to digital circuit that will be used to record data from space ion propulsion rocket booster tests. The problem that makes building this circuit so difficult is that it contains high voltage we must find a way to lower the voltage signal before the data is transferred into the computer to be read. The solution to this problem was to transport the signal using infrared light which will lower

Integration of Virtual Machine Technologies into Hastily Formed Networks in Support of Humanitarian Relief and Disaster Recovery Missions

Science.gov (United States)

2011-12-01

for Electrical and Electronic Engineers IETA Internet Engineering Task Force IPv4 Internet Protocol version 4 IPv6 Internet Protocol version 6 JRV...Corporate website: http://www- 03.ibm.com/ibm/ history /exhibits/pc25/pc25_intro.html IEEE. (2003). IEEE-SA-IEEE-std 802.3af-2003 interpretation

Teaching electronics to first-year non-electrical engineering students

OpenAIRE

Dahnoun, Naim

2017-01-01

Teaching electronics is not only for electrical and electronics students but also for mechanical, aerospace, engineering design, civil and engineering mathematics programmes, which are likely to have electronics units as part of their curriculum. To teach electronics for these non-electronic programmes is very challenging in many aspects. First, the electronics unit has to satisfy the learning outcomes for each programme. Second, the student's motivation is normally very low since electronics...

Proceedings of IEEE Machine Learning for Signal Processing Workshop XV

DEFF Research Database (Denmark)

Larsen, Jan

These proceedings contains refereed papers presented at the Fifteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP’2005), held in Mystic, Connecticut, USA, September 28-30, 2005. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP) organized...... by the NNSP Technical Committee of the IEEE Signal Processing Society. The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized...... by the Machine Learning for Signal Processing Technical Committee with sponsorship of the IEEE Signal Processing Society. Following the practice started two years ago, the bound volume of the proceedings is going to be published by IEEE following the Workshop, and we are pleased to offer to conference attendees...

Qualification test of Class 1E equipment based on IEEE323 Std 2003

International Nuclear Information System (INIS)

Kim, J. S.; Jung, S. C.; Kim, T. R.

2004-01-01

IEEE Standard for Qualifying Class 1E Equipment has been updated to 2003 edition since the issue of IEEE Std 323-1971, 1974, 1983. NRC approved the IEEE Std 323-1974 as Qualification standard of Class 1E Equipment in domestic nuclear power plant. IEEE Std 323-2003 was issued in September of 2003 and utility is waiting the approval of NRC. IEEE Std 323-2003 suggest a new qualification technique which adopts the condition monitoring. Performance of two transient during DBA test is no longer recommended in IEEE Std 323-2003. IEEE323 Std 2003 included a chapter of ''extension of Qualified life'' to make available the life extension of components during plant life extension. For the efficient control of preserving EQ in domestic nuclear power plant, IEEE323 Std 2003 is strongly recommended

IEEE Prize for Lucio Rossi

CERN Multimedia

IEEE Council on Superconductivity

2007-01-01

Lucio Rossi receives his prize from John Spargo, Chairman of the IEEE Council on Superconductivity (left), and Martin Nisenoff, Chairman of the Council on Superconductivity's Awards Committee (right).

IEEE 802.11ah: A Technology to Face the IoT Challenge.

Science.gov (United States)

Baños-Gonzalez, Victor; Afaqui, M Shahwaiz; Lopez-Aguilera, Elena; Garcia-Villegas, Eduard

2016-11-22

Since the conception of the Internet of things (IoT), a large number of promising applications and technologies have been developed, which will change different aspects in our daily life. This paper explores the key characteristics of the forthcoming IEEE 802.11ah specification. This future IEEE 802.11 standard aims to amend the IEEE 802.11 legacy specification to support IoT requirements. We present a thorough evaluation of the foregoing amendment in comparison to the most notable IEEE 802.11 standards. In addition, we expose the capabilities of future IEEE 802.11ah in supporting different IoT applications. Also, we provide a brief overview of the technology contenders that are competing to cover the IoT communications framework. Numerical results are presented showing how the future IEEE 802.11ah specification offers the features required by IoT communications, thus putting forward IEEE 802.11ah as a technology to cater the needs of the Internet of Things paradigm.

Proceedings IEEE Visualization Conference and IEEE Information Visualization Conference (VIS'07 and INFOVIS'07, Sacramento CA, USA, October 28-November 1, 2007)

NARCIS (Netherlands)

Chen, M.; Hansen, C.; North, C.; Pang, A.; Wijk, van J.J.

2007-01-01

These are the proceedings of the IEEE Visualization Conference 2007 (Vis 2007) and the IEEE Information Visualization Conference 2007 (InfoVis 2007) held during October 28 to November 1, 2007 in Sacramento, California. The power of using computing technology to create useful, effective imagery for

Performance Analysis of IEEE 802.11e (EDCF) and IEEE 802.11(DCF) WLAN Incorporating Different Physical Layer Standards

Science.gov (United States)

Sharma, V.; Singh, H.; Malhotra, J.

2012-12-01

Medium access coordination function basically implements the distributed coordination function (DCF) which provides support to best effort services but limited to QoS services. Subsequently, a new standard, namely enhanced distributed channel access (EDCA) is reported. The IEEE 802.11e (EDCA) defines MAC procedures to support QoS requirements which specifies distributed contention based access scheme to access the shared wireless media. This paper evaluates the performance of EDCA based IEEE 802.11 WLAN for various access categories (ACs) using OPNET™ Modeller 14.5. Further, the computed results are compared with DCF protocols in terms of QoS parameters. Furthermore, the simulative observation is reported at data rate of 54 Mbps using different physical layer protocols such as IEEE 802.11a/b/g to stumble on the best one to be implemented with EDCF to achieve improved QoS.

Electronics Engineering Department Thrust Area report FY'84

International Nuclear Information System (INIS)

Minichino, C.; Phelps, P.L.

1984-01-01

This report describes the work of the Electronics Engineering Department Thrust Areas for FY'84: diagnostics and microelectronic engineering; signal and control engineering; microwave and pulsed power engineering; computer-aided engineering; engineering modeling and simulation; and systems engineering. For each Thrust Area, an overview and a description of the goals and achievements of each project is provided

An Improved Cross-Layering Design for IPv6 Fast Handover with IEEE 802.16m Entry Before Break Handover

Science.gov (United States)

Kim, Ronny Yongho; Jung, Inuk; Kim, Young Yong

IEEE 802.16m is an advanced air interface standard which is under development for IMT-Advanced systems, known as 4G systems. IEEE 802.16m is designed to provide a high data rate and a Quality of Service (QoS) level in order to meet user service requirements, and is especially suitable for mobilized environments. There are several factors that have great impact on such requirements. As one of the major factors, we mainly focus on latency issues. In IEEE 802.16m, an enhanced layer 2 handover scheme, described as Entry Before Break (EBB) was proposed and adopted to reduce handover latency. EBB provides significant handover interruption time reduction with respect to the legacy IEEE 802.16 handover scheme. Fast handovers for mobile IPv6 (FMIPv6) was standardized by Internet Engineering Task Force (IETF) in order to provide reduced handover interruption time from IP layer perspective. Since FMIPv6 utilizes link layer triggers to reduce handover latency, it is very critical to jointly design FMIPv6 with its underlying link layer protocol. However, FMIPv6 based on new handover scheme, EBB has not been proposed. In this paper, we propose an improved cross-layering design for FMIPv6 based on the IEEE 802.16m EBB handover. In comparison with the conventional FMIPv6 based on the legacy IEEE 802.16 network, the overall handover interruption time can be significantly reduced by employing the proposed design. Benefits of this improvement on latency reduction for mobile user applications are thoroughly investigated with both numerical analysis and simulation on various IP applications.

A strategy for implementation of experience based seismic equipment qualification in IEEE and ASME industry standards

International Nuclear Information System (INIS)

Adams, T.M.

1996-01-01

In the past 20 years, extensive data on the performance of mechanical and electric equipment during actual strong motion earthquakes and seismic qualification tests has been accumulated. Recognizing that an experience based approach provides a technically sound and cost effective method for the seismic qualification of some or certain equipment, the IEEE Nuclear Power Engineering Committee and the ASME Committee on Qualification of Mechanical Equipment established a Special Working Group to investigate the incorporation of experienced based methods into the industry consensus codes and standards currently used in the seismic qualification of Seismic Category Nuclear Power Plant equipment. This paper presents the strategy (course of action) which was developed by the Special Working Group for meeting this objective of incorporation of experience based seismic qualification standards used in the design and seismic qualification of seismic category nuclear power plant equipment. This strategy was recommended to both chartering organizations, the IEEE Nuclear Power Engineering Committee and the ASME Committee on Qualification of Mechanical Equipment for their consideration and implementation. The status of the review and implementation of the Special Working Group's recommended strategy by the sponsoring organization is also discussed

Synchronous ethernet and IEEE 1588 in telecoms next generation synchronization networks

CERN Document Server

2013-01-01

This book addresses the multiple technical aspects of the distribution of synchronization in new generation telecommunication networks, focusing in particular on synchronous Ethernet and IEEE1588 technologies. Many packet network engineers struggle with understanding the challenges that precise synchronization distribution can impose on networks. The usual “why”, “when” and particularly “how” can cause problems for many engineers. In parallel to this, some other markets have identical synchronization requirements, but with their own design requirements, generating further questions. This book attempts to respond to the different questions by providing background technical information. Invaluable information on state of-the-art packet network synchronization and timing architectures is provided, as well as an unbiased view on the synchronization technologies that have been internationally standardized over recent years, with the aim of providing the average reader (who is not skilled in the art) wi...

Real-Time-Simulation of IEEE-5-Bus Network on OPAL-RT-OP4510 Simulator

Science.gov (United States)

Atul Bhandakkar, Anjali; Mathew, Lini, Dr.

2018-03-01

The Real-Time Simulator tools have high computing technologies, improved performance. They are widely used for design and improvement of electrical systems. The advancement of the software tools like MATLAB/SIMULINK with its Real-Time Workshop (RTW) and Real-Time Windows Target (RTWT), real-time simulators are used extensively in many engineering fields, such as industry, education, and research institutions. OPAL-RT-OP4510 is a Real-Time Simulator which is used in both industry and academia. In this paper, the real-time simulation of IEEE-5-Bus network is carried out by means of OPAL-RT-OP4510 with CRO and other hardware. The performance of the network is observed with the introduction of fault at various locations. The waveforms of voltage, current, active and reactive power are observed in the MATLAB simulation environment and on the CRO. Also, Load Flow Analysis (LFA) of IEEE-5-Bus network is computed using MATLAB/Simulink power-gui load flow tool.

7th IEEE International Conference Intelligent Systems

CERN Document Server

Atanassov, KT; Doukovska, L; Hadjiski, M; Jotsov, V; Kacprzyk, J; Kasabov, N; Sotirov, S; Szmidt, E; Zadrożny, S; Filev, D; Jabłkowski, J; Kacprzyk, J; Krawczak, M; Popchev, I; Rutkowski, L; Sgurev, V; Sotirova, E; Szynkarczyk, P

2015-01-01

This two volume set of books constitutes the proceedings of the 2014  7th IEEE International Conference Intelligent Systems (IS), or IEEE IS’2014 for short, held on September 24‐26, 2014 in Warsaw, Poland. Moreover, it contains some selected papers from the collocated IWIFSGN'2014-Thirteenth International Workshop on Intuitionistic Fuzzy Sets and Generalized Nets.The conference was organized by the Systems Research Institute, Polish Academy of Sciences, Department IV of Engineering Sciences, Polish Academy of Sciences, and Industrial Institute of Automation and Measurements - PIAP.The papers included in the two proceedings volumes have been subject to a thorough review process by three highly qualified peer reviewers.Comments and suggestions from them have considerable helped improve the quality of the papers but also the division of the volumes into parts, and assignment of the papers to the best suited parts.  

Fully printable, strain-engineered electronic wrap for customizable soft electronics.

Science.gov (United States)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-24

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

Science.gov (United States)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Innovative technologies in course Electrical engineering and electronics

Science.gov (United States)

Kuznetsov, E. V.; Kiselev, V. I.; Kulikova, E. A.

2017-11-01

Department of Electrical Engineering and Nondestructive Testing, NRU “MPEI”, has been working on development Electronic Learning Resources (ELRs) in course Electrical Engineering and Electronics for several years. This work have been focused on education intensification and effectiveness while training bachelors in nonelectrical specializations including students from Thermal and Atomic Power Engineering Institute. The developed ELRs are united in a tutorial module consisting of three parts (Electrical Circuits, Electrical Machines, Basics of Electronics): electronic textbook and workbook (ETW); virtual laboratory sessions (VLS); training sessions (ETS); personal tasks (PT); testing system that contains electronic tests in all course subjects and built-in verification of a student’s work results in ETW, VLS, ETS, PT. The report presents samples of different ELRs in html format and MathCAD, MatLAB Simulink applications, copyrighted programs in Java2, Delphi, VB6, C++. The report also contains the experience description, advantages and disadvantages of the new technologies. It is mentioned that ELRs provide new opportunities in course studying.

IEEE standard criteria for type tests of class 1E modules used in nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1977-01-01

The Institute of Electrical and Electronics Engineers has generated this document to provide direction for type testing Class 1E modules and obtaining specific type test data. It supplements IEEE Std 323-1974, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, which describes the basic requirements for Class 1E equipment qualification. Adherence to this document alone may not suffice for assuring public health and safety because it is the integrated performance of the structures, the fluid systems, the electrical systems, the instrumentation systems of the station, and in particular, the plant protection system of which these modules are a part that prevents accidents or limits the consequences of accidents. Each applicant to the Nuclear Regulatory Commission for a license to operate a nuclear power generating station has the responsibility to assure himself and others that this document, if used, is pertinent to his application and that the integrated performance of his station is adequate

IEEE Std 535-1986: IEEE standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 308-1980 can be demonstrated by using the procedures provided in this standard in accordance with ANSI/IEEE Std 323-1983. Battery sizing, maintenance, capacity testing, installation, charging equipment, and consideration of other type batteries are beyond the scope of this standard

IEEE standard for type test of class 1E electric cables, field splices, and connections for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1974-01-01

The Institute of Electrical and Electronics Engineers has generated this document to provide guidance for developing a program to type test cables, field splices, and connections and obtain specific type test data. It supplements IEEE Std 323-1974 Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations, which describes basic requirements for equipment qualification. It is the integrated performance of the structures, fluid systems, the electrical systems, the instrumentation systems of the station, and in particular, the plant protection system, that limits the consequences of accidents. Seismic effects on installed cable systems are not within the scope of this document. Section 2 of this guide is an example of type tests. It is the purpose of this guide to deal with cable and connections; however, at the time of issue, detailed examples of tests for connections were not available

IEEE Std 535-1979: IEEE standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1971 and IEE Std 308-1978, can be demonstrated by using the procedures provided in this standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other type batteries are beyond the scope of this standard

4th IEEE/ACIS International Conference on Computer and Information Science

CERN Document Server

2016-01-01

This edited book presents scientific results of the 14th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2015) which was held on June 28 – July 1, 2015 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

Utilizing reliability concepts in the development of IEEE recommended good practices for nuclear plant maintenance

International Nuclear Information System (INIS)

Gradin, L.P.

1986-01-01

This paper presents information describing the concern for nuclear power plant electrical equipment maintenance and the IEEE Nuclear Power Engineering Committee's method to address that concern. That method includes the creation of Working Group 3.3, ''Maintenance Good Practices'' which is developing specific maintenance good practice documents, supporting technical information exchange, and providing a vehicle to promote practices which can reduce cost and enhance plant safety. The foundation for that effort is the utilization of Reliability concepts

IEEE 802154 and ZigBee as enabling technologies for low-power wireless systems with quality-of-service constraints

CERN Document Server

Tennina, Stefano; Daidone, Roberta; Alves, Mário; Jurčík, Petr; Severino, Ricardo; Tiloca, Marco; Hauer, Jan-Hinrich; Pereira, Nuno; Dini, Gianluca; Bouroche, Mélanie; Tovar, Eduardo

2013-01-01

This book outlines the most important characteristics of IEEE 802.15.4 and ZigBee and how they can be used to engineer Wireless Sensor Network (WSN) systems and applications, with a particular focus on Quality-of-Service (QoS) aspects. It starts by providing a snapshot of the most relevant features of these two protocols, identifying some gaps in the standard specifications. Then it describes several state-of-the-art open-source implementations, models and tools that have been designed by the authors and have been widely used by the international community. The book also outlines the fundamental performance limits of IEEE 802.15.4/ZigBee networks, based on well-sustained analytical, simulation and experimental models, including how to dimension such networks to optimize delay/energy trade-offs.

IEEE Prize for Lucio Rossi

CERN Multimedia

2007-01-01

Lucio Rossi receives his prize from John Spargo, Chairman of the IEEE Council on Superconductivity (left), and Martin Nisenoff, Chairman of the Council on Superconductivity’s Awards Committee (right). (Photo: IEEE Council on Superconductivity)With the magnets installed in the tunnel and work on the interconnections almost completed, Lucio Rossi has reaped the rewards of fifteen years of work. And yet, when the physicist from Milan arrived to take charge of the group responsible for the superconducting magnets in 2001, success seemed far from assured. Endowed with surprising levels of energy, Lucio Rossi, together with his team, ensured that production of these highly complex magnets got underway. Today, that achievement earns them the recognition not only of CERN but also of the international superconducting community. It is for this achievement that Lucio Rossi was awarded the prize by the IEEE’s (Institute of Electrical an...

IEEE conference record -- Abstracts: 1996 IEEE international conference on plasma science

International Nuclear Information System (INIS)

Anon.

1996-01-01

This meeting covered the following topics: space plasmas; non-equilibrium plasma processing; computer simulation of vacuum power tubes; vacuum microelectronics; microwave systems; basic phenomena in partially ionized gases -- gaseous electronics, electrical discharges; ball lightning/spherical plasma configuration; plasma diagnostics; plasmas for lighting; dense plasma focus; intense ion and electron beams; plasma, ion, and electron sources; flat panel displays; fast z-pinches and x-ray lasers; environmental/energy issues in plasma science; thermal plasma processing; computational plasma physics; magnetic confinement fusion; microwave-plasma interactions; space plasma engineering; EM and ETH launchers; fast wave devices; intense beam microwaves; slow wave devices; space plasma measurements; basic phenomena in fully ionized plasma -- waves, instabilities, plasma theory, etc; plasma closing switches; fast opening switches; and laser-produced plasma. Separate abstracts were prepared for most papers in this conference

IEEE International Workshop on Machine Learning for Signal Processing: Preface

DEFF Research Database (Denmark)

Tao, Jianhua

The 21st IEEE International Workshop on Machine Learning for Signal Processing will be held in Beijing, China, on September 18–21, 2011. The workshop series is the major annual technical event of the IEEE Signal Processing Society's Technical Committee on Machine Learning for Signal Processing...

Specialty Engineering Supplement to IEEE-15288.1

Science.gov (United States)

2015-05-15

receiver required to work in a dense EMI environment. (15) Any RF receiver with a burnout level of less than 30 dBm (1 mW). b. A summary of all...Defense Programs.  Shaw, B E, Systems Engineering Requirements and Products, Aerospace Report Number TR- 2013-00001. The Aerospace Corporation, El ...Missile Systems Center AIR FORCE SPACE COMMAND 483 N. Aviation Blvd. El Segundo, CA 91245 Attention: SMC/EN

Windows Calorimeter Control (WinCal) program computer software configuration management plan

International Nuclear Information System (INIS)

1997-01-01

This document describes the system configuration management activities performed in support of the Windows Calorimeter Control (WinCal) system, in accordance with Site procedures based on Institute of Electrical and Electronic Engineers (IEEE) Standard 828-1990, Standard for Software Configuration Management Plans (IEEE 1990) and IEEE Standard 1042-1987, Guide to Software Configuration Management (IEEE 1987)

Annual Symposium in Electronics Packaging

CERN Document Server

1991-01-01

Each May, the Continuing Education Division of the T.J.Watson School of Engineering, Applied Science and Technology at the State University of New York at Binghamton sponsors an Annual Symposium in Electronics Packaging in cooperation with local professional societies (IEEE, ASME, SME, IEPS) and UnlPEG (the University-Industry Partnership for Economic Growth.) Each volume of this Electronics Packaging Forum series is based on the the preceding Symposium, with Volume Two based on the 1990 presentations. The Preface to Volume One included a brief definition of the broad scope of the electronics packaging field with some comments on why it has recently assumed such a more prominent priority for research and development. Those remarks will not be repeated here; at this point it is assumed that the reader is a professional in the packaging field, or possibly a student of one of the many academic disciplines which contribute to it. It is worthwhile repeating the series objectives, however, so the reader will be cle...

Implicit Block ACK Scheme for IEEE 802.11 WLANs

Science.gov (United States)

Sthapit, Pranesh; Pyun, Jae-Young

2016-01-01

The throughput of IEEE 802.11 standard is significantly bounded by the associated Medium Access Control (MAC) overhead. Because of the overhead, an upper limit exists for throughput, which is bounded, including situations where data rates are extremely high. Therefore, an overhead reduction is necessary to achieve higher throughput. The IEEE 802.11e amendment introduced the block ACK mechanism, to reduce the number of control messages in MAC. Although the block ACK scheme greatly reduces overhead, further improvements are possible. In this letter, we propose an implicit block ACK method that further reduces the overhead associated with IEEE 802.11e’s block ACK scheme. The mathematical analysis results are presented for both the original protocol and the proposed scheme. A performance improvement of greater than 10% was achieved with the proposed implementation.

IEEE Std 650-1990: IEEE standard for qualification of Class 1E static battery chargers and inverters for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

Methods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power generating stations are described. The qualification methods set forth employ a combination of type testing and analysis, the latter including a justification of methods, theories, and assumptions used. These procedures meet the requirements of IEEE Std 323-1983, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations

Reliable design of electronic equipment an engineering guide

CERN Document Server

Natarajan, Dhanasekharan

2014-01-01

This book explains reliability techniques with examples from electronics design for the benefit of engineers. It presents the application of de-rating, FMEA, overstress analyses and reliability improvement tests for designing reliable electronic equipment. Adequate information is provided for designing computerized reliability database system to support the application of the techniques by designers. Pedantic terms and the associated mathematics of reliability engineering discipline are excluded for the benefit of comprehensiveness and practical applications. This book offers excellent support

Electronic isolators used in safety systems of US nuclear power plants

International Nuclear Information System (INIS)

Nielsen, J.R.

1986-01-01

An evaluation program has been conducted for electronic isolators used in safety systems of US nuclear power plants. As a result of the program, some recommendations are made for test methods that can be used to ensure that isolation devices are being qualified adequately to satisfy IEEE-279 requirements. These recommendations are based on studies made on National Standards; conversations held with utility personnel, Nuclear Steam System Suppliers, Architect Engineers, and the isolator vendor staff; and analysis of actual tests performed on sample isolators

News from the Library

CERN Multimedia

CERN Library

2010-01-01

A third of the world’s current literature in electrical engineering is available on your CERN desktop Looking for a technical standard on software reviews and audits? Is it referred to as "IEEE color books"? Want to download and read NOW the latest version of IEEE 802? Whenever a need for a technical standard or specification arises in your activity, the Library is here to serve you. For IEEE standards it is particularly easy; the whole collection is available for immediate download. Indeed, since 2007, the CERN Library offers readers online access to the complete IEEE Electronic Library (Institute of Electrical and Electronics Engineers). This licence gives unlimited online access to all IEEE and IET journals and proceedings, starting from the first issue. But not everyone knows that this resource gives also access to all current IEEE standards as well as a selection of archival ones. The Library is now working on the integration of a selection of these standards in our onlin...

ANP applied to electronics engineering project selection

International Nuclear Information System (INIS)

Habib, M.

2010-01-01

Project selection in Electronics engineering is a complex decision-making process. This research paper illustrates an application of ANP/AHP process. The AHP (Analytic Hierarchy Process) is employed to break down large unstructured decision problems into manageable and measureable components. The ANP, as the general form of AHP, is powerful to deal with complex decisions where interdependence exists in a decision model. The research paper discusses the use of the ANP, a general form of Saaty's analytic Network process, as a model to evaluate the value of competing Electronics projects. The research paper concludes with a case study describing the implementation of this model at an engineering college, including data based on the actual use of the decision making model. The case study helps to verify that AHP is an effective and efficient decision-making tool. A major contribution of this work is to provide a methodology for assessing the best project. Despite a number of publications applying AHP in project selection, this is probably the first time that an attempt has been made to apply AHP in an electronics project selection in an engineering university environment. (author)

Global Software Engineering

DEFF Research Database (Denmark)

Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

2016-01-01

Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

IEEE Conference Record - Abstracts. 1997 IEEE International Conference on Plasma Science, 19 - 22 May 1997 San Diego, California

National Research Council Canada - National Science Library

Hyman, Julius

1997-01-01

This 360 page softbound publication includes the following major sections. An invitation to ICOPS'97, Catamaran Resort Hotel Floor Pinas, Officers of the IEEE Nuclear and Plasma Sciences Society, Conference Information...

Software engineering architecture-driven software development

CERN Document Server

Schmidt, Richard F

2013-01-01

Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management

CERN Document Server

Lin, Sally

2012-01-01

This volume presents the main results of 2011 International Conference on Electronic  Engineering, Communication and Management (EECM2011) held December 24-25, 2011, Beijing China. The EECM2011 is an integrated conference providing a valuable opportunity for researchers, scholars and scientists to exchange their ideas face to face together. The main focus of the EECM 2011 and the present 2 volumes “Advances in Electronic Engineering, Communication and Management” is on Power Engineering, Electrical engineering applications, Electrical machines, as well as Communication and Information Systems Engineering.

Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management

CERN Document Server

Lin, Sally

2012-01-01

  This volume presents the main results of 2011 International Conference on Electronic  Engineering, Communication and Management (EECM2011) held December 24-25, 2011, Beijing China. The EECM2011 is an integrated conference providing a valuable opportunity for researchers, scholars and scientists to exchange their ideas face to face together. The main focus of the EECM 2011 and the present 2 volumes “Advances in Electronic Engineering, Communication and Management” is on Power Engineering, Electrical engineering applications, Electrical machines, as well as Communication and Information Systems Engineering.

Electronic battlespace facility for research, develoment and engineering

NARCIS (Netherlands)

Jense, Hans; Kuijpers, N.H.L.; Elias, R.J.D.

1997-01-01

In order to support its research, development and engineering activities in the area of distributed simulation for training and command & control, TNO Physics and Electronics Laboratory has developed (and continues to enhance) an Electronic Battlespace Facility (EBF). This paper presents an overview

Electronic ignition system for internal combustion engines

Energy Technology Data Exchange (ETDEWEB)

Crowder, L W

1980-11-20

Mechanical ignition adjustment devices are sensitive to many effects, for example breakage, faults due to manufacturing tolerances, play in the linkage and the effect of a dirty or corrosive environment. It is therefore the purpose of the invention to provide an electronic ignition system which avoids the disadvantages of a mechanical system. The invention provides adjustment of the ignition point, which gives advance of the ignition timing with increasing speed. An output signal is formed, which supersedes the signal supplied by the electronic control system, so that the ignition is advanced. This also occurs with a larger crankshaft angle before top dead centre of the engine. The electronic control system combines with a source of AC time signals which has a generator as electrical transmitter and a DC battery and ignition coil. The rotor of the electrical generator is driven synchronised with the engine. Structural and functional details of the transistor control circuits are given in 5 patent claims.

Energy Harvesting - Wireless Sensor Networks for Indoors Applications Using IEEE 802.11

DEFF Research Database (Denmark)

Fafoutis, Xenofon; Sørensen, Thomas; Madsen, Jan

2014-01-01

The paper investigates the feasibility of using IEEE 802.11 in energy harvesting low-power sensing applications. The investigation is based on a prototype carbon dioxide sensor node that is powered by artificial indoors light. The wireless communication module of the sensor node is based on the RTX......4100 module. RTX4100 incorporates a wireless protocol that duty-cycles the radio while being compatible with IEEE 802.11 access points. The presented experiments demonstrate sustainable operation but indicate a trade-off between the benefits of using IEEE 802.11 in energy harvesting applications...

Engineers' Responsibilities for Global Electronic Waste: Exploring Engineering Student Writing Through a Care Ethics Lens.

Science.gov (United States)

Campbell, Ryan C; Wilson, Denise

2017-04-01

This paper provides an empirically informed perspective on the notion of responsibility using an ethical framework that has received little attention in the engineering-related literature to date: ethics of care. In this work, we ground conceptual explorations of engineering responsibility in empirical findings from engineering student's writing on the human health and environmental impacts of "backyard" electronic waste recycling/disposal. Our findings, from a purposefully diverse sample of engineering students in an introductory electrical engineering course, indicate that most of these engineers of tomorrow associated engineers with responsibility for the electronic waste (e-waste) problem in some way. However, a number of responses suggested attempts to deflect responsibility away from engineers towards, for example, the government or the companies for whom engineers work. Still other students associated both engineers and non-engineers with responsibility, demonstrating the distributed/collective nature of responsibility that will be required to achieve a solution to the global problem of excessive e-waste. Building upon one element of a framework for care ethics adopted from the wider literature, these empirical findings are used to facilitate a preliminary, conceptual exploration of care-ethical responsibility within the context of engineering and e-waste recycling/disposal. The objective of this exploration is to provide a first step toward understanding how care-ethical responsibility applies to engineering. We also hope to seed dialogue within the engineering community about its ethical responsibilities on the issue. We conclude the paper with a discussion of its implications for engineering education and engineering ethics that suggests changes for educational policy and the practice of engineering.

Engine modeling and control modeling and electronic management of internal combustion engines

CERN Document Server

Isermann, Rolf

2014-01-01

The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software developm...

0011-0030.How to make an abstract in IEEE Format for ...

Indian Academy of Sciences (India)

Home; public; Volumes; reso; 021; 01; 0011-0030.How to make an abstract in IEEE Format for AvishkarMulticultural Night in IEEE R10 Student Congress 2009Performances.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook ...

IEEE 1451.2 based Smart sensor system using ADuc847

Science.gov (United States)

Sreejithlal, A.; Ajith, Jose

IEEE 1451 standard defines a standard interface for connecting transducers to microprocessor based data acquisition systems, instrumentation systems, control and field networks. Smart transducer interface module (STIM) acts as a unit which provides signal conditioning, digitization and data packet generation functions to the transducers connected to it. This paper describes the implementation of a microcontroller based smart transducer interface module based on IEEE 1451.2 standard. The module, implemented using ADuc847 microcontroller has 2 transducer channels and is programmed using Embedded C language. The Sensor system consists of a Network Controlled Application Processor (NCAP) module which controls the Smart transducer interface module (STIM) over an IEEE1451.2-RS232 bus. The NCAP module is implemented as a software module in C# language. The hardware details, control principles involved and the software implementation for the STIM are described in detail.

First International Conference on Electrical, Electronic and Communications Engineering

CERN Document Server

Vyas, Nalinaksh; Sanei, Saeid; Deb, Kalyanmoy

2017-01-01

The book reports on advanced theories and methods in two related engineering fields: electrical and electronic engineering, and communications engineering and computing. It highlights areas of global and growing importance, such as renewable energy, power systems, mobile communications, security and the Internet of Things (IoT). The contributions cover a number of current research issues, including smart grids, photovoltaic systems, wireless power transfer, signal processing, 4G and 5G technologies, IoT applications, mobile cloud computing and many more. Based on the proceedings of the first International Conference on Emerging Trends in Electrical, Electronic and Communications Engineering (ELECOM 2016), held in Voila Bagatelle, Mauritius from November 25 to 27, 2016, the book provides graduate students, researchers and professionals with a snapshot of the state-of-the-art and a source of new ideas for future research and collaborations.

Imitating model of the electronic regulator frequencies of rotation of the automobile diesel engine

OpenAIRE

Тырловой, С. И.

2011-01-01

The imitating model of an frequency electronic regulator of rotation of high-speed diesel engine an automobile diesel engine with the distributive fuel pump of Bosch company is resulted. Is executed simulation transitive modes of a diesel engine with mechanic and electronic regulators. Deterioration influence plungers steams on dinamic and economic indicators of a diesel engine is analysed. Operational indicators of a diesel engine with mechanic and electronic regulators are compared. The obt...

Electronics Engineering Research. Final report, FY 1979

International Nuclear Information System (INIS)

Weissenberger, S.

1980-01-01

Accomplishments in Electronics Engineering Research (EER) during FY79 spanned a broad range of technologies, from high-speed microelectronics to digital image enhancement; from underground probing with electromagnetic waves to detecting neutrons with a small solid-state device; and from computer systems to aid engineers, to software tools to aid programmers. This report describes the overall EER program and its objectives, summarizes progress made in FY79, and outlines plans for FY80

Photonics and Web Engineering: WILGA 2009

CERN Document Server

Romaniuk, Ryszard

2009-01-01

The paper is a digest of work presented during a cyclic Ph.D. student symposium on Photonics and Web Engineering WILGA 2009. The subject of WILGA are Photonics Applications in Astronomy, Communications, Industry and High-Energy Physics Experiments. WILGA is sponsored by EuCARD Project. Symposium is organized by ISE PW in cooperation with professional organizations IEEE, SPIE, PSP and KEiT PAN. There are presented mainly Ph.D. and M.Sc. theses as well as achievements of young researchers. These papers, presented in such a big number, more than 250 in some years, are in certain sense a good digest of the condition of academic research capabilities in this branch of science and technology. The undertaken research subjects for Ph.D. theses in electronics is determined by the interest and research capacity (financial, laboratory and intellectual) of the young researchers and their tutors. Basically, the condition of academic electronics research depends on financing coming from applications areas. During Wilga 200...

IEEE No. 323, IEEE trial-use standard: General guide for qualifying Class I electric equipment for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This document describes the basic requirements for the qualification of Class I electric equipment. This is equipment which is essential to the safe shutdown and isolation of the reactor or whose failure or damage could result in significant release of radioactive material. The purpose of this document is to provide guidance for demonstrating the qualifications of electrical equipment as required in the IEEE Std 279 -- Criteria for Nuclear Power Generating Station Protection Systems, and IEEE Std 308 -- Criteria for Class 1E Electric Systems for Nuclear Power Generating Stations. The qualification methods described may be used in conjunction with the Guides for qualifying specific types of equipment, (see Foreword), for updating qualification following modifications or for qualifying equipment for which no applicable Guide exists

Palm Power Free-Piston Stirling Engine Control Electronics

Science.gov (United States)

Keiter, Douglas E.; Holliday, Ezekiel

2007-01-01

A prototype 35We, JP-8 fueled, soldier-wearable power system for the DARPA Palm Power program has been developed and tested by Sunpower. A hermetically-sealed 42We Sunpower Free-Piston Stirling Engine (FPSE) with integral linear alternator is the prime mover for this system. To maximize system efficiency over a broad range of output power, a non-dissipative, highly efficient electronic control system which modulates engine output power by varying piston stroke and converts the AC output voltage of the FPSE into 28Vdc for the Palm Power end user, has been designed and demonstrated as an integral component of the Palm Power system. This paper reviews the current status and progress made in developing the control electronics for the Palm Power system, in addition to describing the operation and demonstrated performance of the engine controller in the context of the current JP-8 fueled Palm Power system.

Biomedical learning experiences for middle school girls sponsored by the Kansas State University Student Chapter of the IEEE EMBS.

Science.gov (United States)

Gruber, Lucinda; Griffith, Connor; Young, Ethan; Sullivan, Adriann; Schuler, Jeff; Arnold-Christian, Susan; Warren, Steve

2009-01-01

Learning experiences for middle school girls are an effective means to steer young women toward secondary engineering curricula that they might not have otherwise considered. Sponsorship of such experiences by a collegiate student group is worthwhile, as it gives the group common purpose and places college students in a position to mentor these young women. This paper addresses learning experiences in different areas of bio-medical engineering offered to middle school girls in November 2008 via a day-long workshop entitled "Engineering The Body." The Kansas State University (KSU) Student Chapter of the IEEE Engineering in Medicine and Biology Society (EMBS) worked with the KSU Women in Engineering and Science Program (WESP) to design and sponsor these experiences, which addressed the areas of joint mechanics, electrocardiograms, membrane transport, computer mouse design, and audio filters for cochlear implants. Fifty five middle-school girls participated in this event, affirming the notion that biomedical engineering appeals to young women and that early education and recruitment efforts have the potential to expand the biomedical engineering talent pool.

The IEEE 802.11a standards

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. The IEEE 802.11a standards. Provides higher data rate and system capacities and uses OFDM in Physical Layer to mitigate the multi path effects;. Supports multiple 20Mhz channel. Each channel being an OFDM Modulated;; 52 Carriers. 48 data carrier; 4 Carry pilot ...

IEEE 802.11 Wireless LANs: Performance Analysis and Protocol Refinement

Directory of Open Access Journals (Sweden)

Chatzimisios P.

2005-01-01

Full Text Available The IEEE 802.11 protocol is emerging as a widely used standard and has become the most mature technology for wireless local area networks (WLANs. In this paper, we focus on the tuning of the IEEE 802.11 protocol parameters taking into consideration, in addition to throughput efficiency, performance metrics such as the average packet delay, the probability of a packet being discarded when it reaches the maximum retransmission limit, the average time to drop a packet, and the packet interarrival time. We present an analysis, which has been validated by simulation that is based on a Markov chain model commonly used in the literature. We further study the improvement on these performance metrics by employing suitable protocol parameters according to the specific communication needs of the IEEE 802.11 protocol for both basic access and RTS/CTS access schemes. We show that the use of a higher initial contention window size does not considerably degrade performance in small networks and performs significantly better in any other scenario. Moreover, we conclude that the combination of a lower maximum contention window size and a higher retry limit considerably improves performance. Results indicate that the appropriate adjustment of the protocol parameters enhances performance and improves the services that the IEEE 802.11 protocol provides to various communication applications.

Introduction to IEEE Std. 7-4.3.2 Annex D -- ''Qualification of existing commercial computers''

International Nuclear Information System (INIS)

Holmstrom, K.J.

1995-01-01

On September 15th of 1993 the IEEE standards board approved IEEE Std. 7-4.3.2-1993, IEEE Standard for Digital Computers in Safety Systems of Nuclear Power Generating Stations. This paper is an introduction to Annex D of this document which concerns the commercial grade dedication of existing computers or new non-1E computers

Global Software Engineering

DEFF Research Database (Denmark)

Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

2016-01-01

SOFTWARE, LIKE ALL industry products, is the result of complex multinational supply chains with many partners from concept to development to production and maintenance. Global software engineering (GSE), IT outsourcing, and business process outsourcing during the past decade have showed growth...... rates of 10 to 20 percent per year. This instalment of Practitioner’s Digest summarizes experiences and guidance from industry to facilitate knowledge and technology transfer for GSE. It’s based on industry feedback from the annual IEEE International Conference on Global Software Engineering, which had...

9th Annual Systems Engineering Conference: Volume 4 Thursday

Science.gov (United States)

2006-10-26

ISO /IEC 27000 series – Information Security Management System (ISMS) – ISO /IEC 17799:2005 – Code of Practice for Information Security Management...October 2006, Track 2 Standards Organizations Supporting Assurance ISO IEC JTC1TC176 SC1 SC22 Terminology Software Engineering Language, OS SC7...Information Assurance IEEE CS ISO IEC IEEE CS NIST FISMA Projects U.S. Gov’t DoD MIL-STDsPolicy Memos OMG Knowledge Discovery Models OMG 259th Annual

Method and electronic database search engine for exposing the content of an electronic database

NARCIS (Netherlands)

Stappers, P.J.

2000-01-01

The invention relates to an electronic database search engine comprising an electronic memory device suitable for storing and releasing elements from the database, a display unit, a user interface for selecting and displaying at least one element from the database on the display unit, and control

78 FR 37958 - Special Conditions: Cessna Aircraft Company, Model J182T; Electronic Engine Control System...

Science.gov (United States)

2013-06-25

...; Electronic Engine Control System Installation AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... feature(s) associated with the installation of an electronic engine control. The applicable airworthiness...) fuel. The J182T incorporates an engine controlled by an electronic engine [[Page 37959

Isolan - A Fibre Optic Network Conforming To IEEE 802.3 Standards

Science.gov (United States)

Roworth, D. A. A.; Howe, N.

1986-10-01

The progress of the IEEE 802.3 standard for fibre optic LANs is indicated with reference to both mixed media networks and full fibre networks. For a fibre optic network the most suitable layout is a "snowflake" topology composed of multiport repeaters and active fibre hubs. A range of components is described which enables the realisation of such a topology in conformance with the IEEE 802.3 standard.

0011-0030.What is IEEE 754 StandardHow to convert real number ...

Indian Academy of Sciences (India)

Home; public; Volumes; reso; 021; 01; 0011-0030.What is IEEE 754 StandardHow to convert real number in binary format using IEEE 754 StandardAn.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News.

48 CFR 52.223-16 - IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false IEEE 1680 Standard for the... CONTRACT CLAUSES Text of Provisions and Clauses 52.223-16 IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products. As prescribed in 23.706(b)(1), insert the following clause: IEEE...

Electronics engineering research proposals for FY78

International Nuclear Information System (INIS)

Cleland, L.L.; Ekstrom, M.P.; Miller, E.K.

1977-01-01

Since most of the Electronics Engineering Research expenditures are in the Engineering Research Division (ERD), the two are inseparable when discussing plans. A reorganization of ERD aimed at further expanding LLL capabilities and being more responsive to LLL needs is now complete. Six discipline related groups constitute the research elements in ERD. Three groups remained unchanged, one group was modified slightly, two groups were added, and one group was dissolved. The technical activities of each of the six research-oriented groups within ERD are reported

Elements of theoretical mechanics for electronic engineers

CERN Document Server

Bultot, Franz

1965-01-01

Elements of Theoretical Mechanics for Electronic Engineers deals with theoretical mechanics, which is considered one of the fundamental branches of instruction essential to training an engineer. This book discusses the oscillatory motions and their counterparts in electrical circuits and radio, and provides an introduction to differential operators of vector field theory. Other topics covered include systems and functions of vectors; dynamics of a free point; vibrations and waves; and statics. Worked examples and many notes on the application of most sections of the theories to electrical deve

Air Force Systems Engineering Assessment Model (AF SEAM) Management Guide, Version 2

Science.gov (United States)

2010-09-21

gleaned from experienced professionals who assisted with the model’s development. Examples of the references used include the following: • ISO /IEC...Defense Acquisition Guidebook, Chapter 4 • AFI 63-1201, Life Cycle Systems Engineering • IEEE/EIA 12207 , Software Life Cycle Processes • Air...Selection criteria Reference Material: IEEE/EIA 12207 , MIL-HDBK-514 Other Considerations: Modeling, simulation and analysis techniques can be

A Comprehensive Taxonomy and Analysis of IEEE 802.15.4 Attacks

Directory of Open Access Journals (Sweden)

Yasmin M. Amin

2016-01-01

Full Text Available The IEEE 802.15.4 standard has been established as the dominant enabling technology for Wireless Sensor Networks (WSNs. With the proliferation of security-sensitive applications involving WSNs, WSN security has become a topic of great significance. In comparison with traditional wired and wireless networks, WSNs possess additional vulnerabilities which present opportunities for attackers to launch novel and more complicated attacks against such networks. For this reason, a thorough investigation of attacks against WSNs is required. This paper provides a single unified survey that dissects all IEEE 802.15.4 PHY and MAC layer attacks known to date. While the majority of existing references investigate the motive and behavior of each attack separately, this survey classifies the attacks according to clear metrics within the paper and addresses the interrelationships and differences between the attacks following their classification. The authors’ opinions and comments regarding the placement of the attacks within the defined classifications are also provided. A comparative analysis between the classified attacks is then performed with respect to a set of defined evaluation criteria. The first half of this paper addresses attacks on the IEEE 802.15.4 PHY layer, whereas the second half of the paper addresses IEEE 802.15.4 MAC layer attacks.

12th ACIS/IEEE International Conference on Computer Science and Information Science

CERN Document Server

2013-01-01

This edited book presents scientific results of the 12th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2013) which was held on June 16-20, 2013 in Toki Messe, Niigata, Japan. The aim of this conference was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas, research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them The conference organizers selected the best 20 papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review.    

Performance Analysis of the IEEE 802.11p Multichannel MAC Protocol in Vehicular Ad Hoc Networks.

Science.gov (United States)

Song, Caixia

2017-12-12

Vehicular Ad Hoc Networks (VANETs) employ multichannel to provide a variety of safety and non-safety applications, based on the IEEE 802.11p and IEEE 1609.4 protocols. The safety applications require timely and reliable transmissions, while the non-safety applications require efficient and high throughput. In the IEEE 1609.4 protocol, operating interval is divided into alternating Control Channel (CCH) interval and Service Channel (SCH) interval with an identical length. During the CCH interval, nodes transmit safety-related messages and control messages, and Enhanced Distributed Channel Access (EDCA) mechanism is employed to allow four Access Categories (ACs) within a station with different priorities according to their criticality for the vehicle's safety. During the SCH interval, the non-safety massages are transmitted. An analytical model is proposed in this paper to evaluate performance, reliability and efficiency of the IEEE 802.11p and IEEE 1609.4 protocols. The proposed model improves the existing work by taking serval aspects and the character of multichannel switching into design consideration. Extensive performance evaluations based on analysis and simulation help to validate the accuracy of the proposed model and analyze the capabilities and limitations of the IEEE 802.11p and IEEE 1609.4 protocols, and enhancement suggestions are given.

Defending IEEE 802.11-Based Networks Against Denial Of Service Attacks

National Research Council Canada - National Science Library

Tan, Boon

2003-01-01

...) attacks targeting its management and media access protocols Computer simulation models have proven to be effective tools in the study of cause and effect in numerous fields This thesis involved the design and implementation of a IEEE 8O2.11-based simulation model using OMNeT++, to investigate the effects of different types of DoS attacks on a IEEE 8O2.11 network, and the effectiveness of corresponding countermeasures.

Advanced Photonic and Electronic Systems WILGA 2010

CERN Document Server

Romaniuk, R S

2010-01-01

SPIE – PSP WILGA Symposium gathers two times a year in January and in May new adepts of advanced photonic and electronic systems. The event is oriented on components and applications. WILGA Symposium on Photonics and Web Engineering is well known on the web for its devotion to “young research” promotion under the eminent sponsorship of international engineering associations like SPIE and IEEE and their Poland Sections or Counterparts. WILGA is supported by the most important national professional organizations like KEiT PAN and PSP-Photonics Society of Poland. The Symposium is organized since 1998 twice a year. It has gathered over 4000 young researchers and published over 2000 papers mainly internationally, including more than 900 in 10 published so far volumes of Proc. SPIE. This paper is a digest of WILGA Symposium Series and WILGA 2010 summary. Introductory part treats WILGA Photonics Applications characteristics over the period 1998-2010. Following part presents a short report on the XXVth and XXVI...

IEEE Std 730 Software Quality Assurance: Supporting CMMI-DEV v1.3, Product and Process Quality Assurance

Science.gov (United States)

2011-05-27

frameworks 4 CMMI-DEV IEEE / ISO / IEC 15288 / 12207 Quality Assurance ©2011 Walz IEEE Life Cycle Processes & Artifacts • Systems Life Cycle Processes...TAG to ISO TC 176 Quality Management • Quality: ASQ, work experience • Software: three books, consulting, work experience • Systems: Telecom & DoD...and IEEE 730 SQA need to align. The P730 IEEE standards working group has expanded the scope of the SQA process standard to align with IS 12207

RE@21 spotlight: most influential papers from the requirements engineering conference

NARCIS (Netherlands)

Glinz, Martin; Wieringa, Roelf J.

Since 2003, an award has been presented annually at the IEEE International Requirements Engineering Conference for the Most Influential Paper presented at the conference 10 years previously. In 2013, we celebrate 21 years of the Requirements Engineering Conference, and we use this as an opportunity

Augmenting the Energy-Saving Impact of IEEE 802.3az via the Control Plane

OpenAIRE

Thaenchaikun , Chakadkit; Jakllari , Gentian; Paillassa , Béatrice

2015-01-01

International audience; IEEE 802.3az, the recent standard for Energy Efficient Ethernet, is one of the main contributions of the ICT industry to the global quest for energy efficiency. Energy consumption reduction is accomplished by essentially replacing the continuous IDLE of legacy IEEE 802.3 cards with a Low Power Idle. While this is an important step in the right direction, studies have shown that the energy saving with IEEE 802.3az highly depends on the traffic load and stops for link ut...

Harmonization of IEEE323 and IEC60780 standards For Environmental Qualificaiton of Electric Equipment

International Nuclear Information System (INIS)

Kim, Jong Seog

2009-01-01

IEEE323 standard has been widely used for the qualification of electric equipment in Asian pacific area while IEC6070 has been mostly used in European area. Since each plant use different standard for environmental qualification, manufacturer has to perform the qualification test twice in accordance with each standard. Problem also can be happened in the plant site when they are going to purchase equipment qualified by different qualification standard which are not used in his plant. The need of harmonization of each standard has been raised several years and it is known that some studies are in progress by IEEE committee. KEPRI has a plan of comparing EQ relative standards of IEEE, IEC and RCC in 2009. In this paper, brief comparing result between IEEE323 and IEC60780 and the proper harmonization method is introduced

Electrical, electronics, and digital hardware essentials for scientists and engineers

CERN Document Server

Lipiansky, Ed

2012-01-01

A practical guide for solving real-world circuit board problems Electrical, Electronics, and Digital Hardware Essentials for Scientists and Engineers arms engineers with the tools they need to test, evaluate, and solve circuit board problems. It explores a wide range of circuit analysis topics, supplementing the material with detailed circuit examples and extensive illustrations. The pros and cons of various methods of analysis, fundamental applications of electronic hardware, and issues in logic design are also thoroughly examined. The author draws on more than tw

XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE)

CERN Document Server

Mazur, Damian; Analysis and Simulation of Electrical and Computer Systems

2015-01-01

This book presents the selected results of the XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE) which was held in Rzeszów and Czarna, Poland on September 27-30, 2013. The main aim of the Conference was to provide academia and industry to discuss and present the latest technological advantages and research results and to integrate the new interdisciplinary scientific circle in the field of electrical engineering, electronics and mechatronics. The Conference was organized by the Rzeszów Division of Polish Association of Theoretical and Applied Electrical Engineering (PTETiS) in cooperation with Rzeszów University of Technology, the Faculty of Electrical and Computer Engineering and Rzeszów University, the Faculty of Mathematics and Natural Sciences.  

Spectrum Hole Identification in IEEE 802.22 WRAN using Unsupervised Learning

OpenAIRE

V. Balaji; S. Anand; C.R. Hota; G. Raghurama

2016-01-01

In this paper we present a Cooperative Spectrum Sensing (CSS) algorithm for Cognitive Radios (CR) based on IEEE 802.22Wireless Regional Area Network (WRAN) standard. The core objective is to improve cooperative sensing efficiency which specifies how fast a decision can be reached in each round of cooperation (iteration) to sense an appropriate number of channels/bands (i.e. 86 channels of 7MHz bandwidth as per IEEE 802.22) within a time constraint (channel sensing time). To meet this objectiv...

A formal analysis of ISO/IEEE P11073-20601 standard of medical device communication

NARCIS (Netherlands)

Goga, Nicolae; Costache, Stefania; Moldoveanu, Florica

2009-01-01

This article presents the formal work done for the ISO/IEEE P11073-20601 Draft Standard for Health informatics - Personal health device communication - Application profile Optimized exchange protocol. ISO/IEEE 11073 family defines standards for device communication between agents (e.g. blood

IEEE standard for qualification of class 1E lead storage batteries for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1979-01-01

IEEE Std 323-1974, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, was developed to provide guidance for demonstrating and documenting the adequacy of electrical equipment used in all Class 1E and interface systems. This standard, IEEE Std 535-1979, was developed to provide specific methods and type test procedures for lead storage batteries in reference to IEEE Std 323-1974

A versatile electrical penetration design qualified to IEEE Std. 317-1983

International Nuclear Information System (INIS)

Lankenau, W.; Wetherill, T.M.

1994-01-01

Although worldwide demand for new construction of nuclear power stations has been on a decline, the available opportunities for the design and construction of qualified electrical penetrations continues to offer challenges, requiring a highly versatile design. Versatility is necessary in order to meet unique customer requirements within the constraints of a design basis qualified to IEEE Std. 317-1983. This paper summarizes such a versatile electrical penetration designed, built and tested to IEEE Std. 317-1983. The principal features are described including major materials of construction. Some of the design constraints such as sealing requirements, and conductor density (including numerical example) are discussed. The requirements for qualification testing of the penetration assembly to IEEE Std. 317-1983 are delineated in a general sense, and some typical test ranges for preconditioning, radiation exposure, and LOCA are provided. The paper concludes by describing ways in which this versatile design has been adapted to meet unique customer requirements in a variety of nuclear power plants

Spectrum Hole Identification in IEEE 802.22 WRAN using Unsupervised Learning

Directory of Open Access Journals (Sweden)

V. Balaji

2016-01-01

Full Text Available In this paper we present a Cooperative Spectrum Sensing (CSS algorithm for Cognitive Radios (CR based on IEEE 802.22Wireless Regional Area Network (WRAN standard. The core objective is to improve cooperative sensing efficiency which specifies how fast a decision can be reached in each round of cooperation (iteration to sense an appropriate number of channels/bands (i.e. 86 channels of 7MHz bandwidth as per IEEE 802.22 within a time constraint (channel sensing time. To meet this objective, we have developed CSS algorithm using unsupervised K-means clustering classification approach. The received energy level of each Secondary User (SU is considered as the parameter for determining channel availability. The performance of proposed algorithm is quantified in terms of detection accuracy, training and classification delay time. Further, the detection accuracy of our proposed scheme meets the requirement of IEEE 802.22 WRAN with the target probability of falsealrm as 0.1. All the simulations are carried out using Matlab tool.

An Extended IEEE 118-Bus Test System With High Renewable Penetration

Energy Technology Data Exchange (ETDEWEB)

Pena, Ivonne; Martinez-Anido, Carlo Brancucci; Hodge, Bri-Mathias

2018-01-01

This article describes a new publicly available version of the IEEE 118-bus test system, named NREL-118. The database is based on the transmission representation (buses and lines) of the IEEE 118-bus test system, with a reconfigured generation representation using three regions of the US Western Interconnection from the latest Western Electricity Coordination Council (WECC) 2024 Common Case [1]. Time-synchronous hourly load, wind, and solar time series are provided for over one year (8784 hours). The public database presented and described in this manuscript will allow researchers to model a test power system using detailed transmission, generation, load, wind, and solar data. This database includes key additional features that add to the current IEEE 118-bus test model, such as: the inclusion of 10 generation technologies with different heat rate functions, minimum stable levels and ramping rates, GHG emissions rates, regulation and contingency reserves, and hourly time series data for one full year for load, wind and solar generation.

2005 8th Annual Systems Engineering Conference. Volume 1, Tuesday

Science.gov (United States)

2005-10-27

systems engineering – Based on ISO 12207 – software engineering – Measure using best practices of CMMI® • Benefits – Facilitates sharing of tools... 12207 Software Life-Cycle Processes IEEE SSC-C Software Engineering Process SECNAV 5000.2C DoD Architecture Framework ISO 9001:2000 Quality Systems GIG...Comparisons and Contrasts Between ISO 14001, OHSAS 18001, and MIL-STD-882D and their Suitability for the Systems Engineering Process Mr. Kenneth Dormer

IEEE C37.105-1987: IEEE standard for qualifying Class 1E protective relays and auxiliaries for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard describes the basic principles, requirements, and methods for qualifying Class 1E protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for applications in nuclear power generating stations. When properly employed it can be used to demonstrate the design adequacy of such equipment under normal, abnormal, design basis event and post design basis event conditions in accordance with ANSI/IEEE Std 323-1983. When protective relays and auxiliaries are located in areas not subject to harsh environments, environmental qualification is not required. Protective relays and auxiliaries located inside primary containment in a nuclear power generating station present special conditions beyond the scope of this document. The qualification procedure presented is generic in nature. Other methods may be used at the discretion of the qualifier, provided the basic precepts of ANSI/IEEE Std 32301983 are satisfied

Guest editors' introduction : Highlights from IEEE Pacific Visualization

NARCIS (Netherlands)

Wijk, van J.J.; North, S.; Shen, H.-W.

2010-01-01

This article looks briefly at four articles based on papers from the 2010 IEEE Pacific Visualization Symposium. These articles, which strongly focus on visual design and applications, cover a range of applications in scientific visualization, information visualization, and graph visualization,

Comparison Of Several Methods Of Implementing A Fiber Optic IEEE 802.3 Ethernet

Science.gov (United States)

Thompson, Geoffrey O.

1987-01-01

Several different methods of implementing a fiber optic version of IEEE 802.3 10BASE LANs have been proposed as a candidate for standardization by IEEE. There have been extensive discussions as to the relative merits and features of the several systems. This paper will discuss the merits of each for this particular application on a comparative basis.

Implementation of DoS attack and mitigation strategies in IEEE 802.11b/g WLAN

Science.gov (United States)

Deng, Julia; Meng, Ke; Xiao, Yang; Xu, Roger

2010-04-01

IEEE 802.11 wireless Local Area Network (WLAN) becomes very prevalent nowadays. Either as a simple range extender for a home wired Ethernet interface, or as a wireless deployment throughout an enterprise, WLAN provides mobility, convenience, and low cost. However, an IEEE 802.11b/g wireless network uses the frequency of unlicensed 2.4GHz, which makes the network unsafe and more vulnerable than traditional Ethernet networks. As a result, anyone who is familiar with wireless network may initiate a Denial of Service (DoS) attack to influence the common communication of the network or even make it crash. In this paper, we present our studies on the DoS attacks and mitigation strategies for IEEE 802.11b/g WLANs and describe some initial implementations using IEEE 802.11b/g wireless devices.

Evaluation of H.264/AVC over IEEE 802.11p vehicular networks

Science.gov (United States)

Rozas-Ramallal, Ismael; Fernández-Caramés, Tiago M.; Dapena, Adriana; García-Naya, José Antonio

2013-12-01

The capacity of vehicular networks to offer non-safety services, like infotainment applications or the exchange of multimedia information between vehicles, have attracted a great deal of attention to the field of Intelligent Transport Systems (ITS). In particular, in this article we focus our attention on IEEE 802.11p which defines enhancements to IEEE 802.11 required to support ITS applications. We present an FPGA-based testbed developed to evaluate H.264/AVC (Advanced Video Coding) video transmission over vehicular networks. The testbed covers some of the most common situations in vehicle-to-vehicle and roadside-to-vehicle communications and it is highly flexible, allowing the performance evaluation of different vehicular standard configurations. We also show several experimental results to illustrate the quality obtained when H.264/AVC encoded video is transmitted over IEEE 802.11p networks. The quality is measured considering two important parameters: the percentage of recovered group of pictures and the frame quality. In order to improve performance, we propose to substitute the convolutional channel encoder used in IEEE 802.11p for a low-density parity-check code encoder. In addition, we suggest a simple strategy to decide the optimum number of iterations needed to decode each packet received.

New Project System for Undergraduate Electronic Engineering

Science.gov (United States)

Chiu, Dirk M.; Chiu, Shen Y.

2005-01-01

A new approach to projects for undergraduate electronic engineering in an Australian university has been applied successfully for over 10 years. This approach has a number of projects running over three year period. Feedback from past graduates and their managers has confirmed that these projects train the students well, giving them the ability…

Final Report: High Power Semiconductor Laser Sources,

Science.gov (United States)

1989-01-01

Mittelstein, Yasuhiko Arakawa, ) Anders Larssonb) and Amnon Yariv California Institute of Technology, Pasadena, California 91 125~412 (Received 7 July...Electronics and Commu- nication Engineers of Japan. He is a member of the Institute of Electronics Yasuhiko Arakawa S󈨑-M󈨔) was born in Ai- and...Gain, Modulation Response, and Spectral Linewidth in AlGaAs Quantum Well Lasers YASUHIKO ARAKAWA. MEMBER, IEEE. AND AMNON YARIV. FELLOW. IEEE Abstract

Enhancing MAC performance of DCF protocol for IEEE 802.11 wireless LANs

Science.gov (United States)

Choi, Woo-Yong

2017-01-01

The DCF (Distributed Coordination Function) is the basic MAC (Medium Access Control) protocol of IEEE 802.11 wireless LANs and compatible with various IEEE 802.11 PHY extensions. The performance of the DCF degrades exponentially as the number of nodes participating in the DCF transmission procedure increases. To deal with this problem, we propose a simple, however efficient modification of the DCF by which the performance of the DCF is greatly enhanced.

Attacks on IEEE 802.11 wireless networks

Directory of Open Access Journals (Sweden)

Dejan Milan Tepšić

2013-06-01

networking it has never been easier to penetrate the network. One of the biggest problems of today's wireless networks is the lack of effective systems for intrusion detection. Forgetting to cover gaps in wireless network security may result in intrusion into the network by an attacker. Security in IEEE 802.11 wireless networks Although the IEEE 802.11 protocol defines security standards, wireless networks are one of the weakest links in the chain of computer networks. The basic security requirements of each computer network are reliable user authentication, privacy protection and user authentication. Security attacks on IEEE 802.11 wireless networks Non-technical attacks include a variety of human weaknesses, such as lack of conscience, negligence or over-confidence towards the strangers. Network attacks include a number of techniques that enable attackers to penetrate into  the wireless network, or at least to disable it. Apart from the security problems with the IEEE 802.11 protocol, there are vulnerabilities in operating systems and applications on wireless clients. The methodology of attack Before testing wireless network security vulnerabilities, it is important to define a formal testing methodology. The first step before the actual attack is footprinting. The second step is the creation of a network map that shows how the wireless system looks. For this purpose, hackers are using specific tools, such as Network Stumbler, Nmap and Fping. When basic information about the wireless network is gathered, more information can be found out through the process of system scanning (enumeration. Attacks on IEEE 802.11 wireless networks Social engineering is a technique by which attackers exploit the natural trust of most people. Radio waves do not respect defined boundaries. If radio waves are broadcasted outside of the boundaries of the defined area, then it is necessary to reduce signal strength on wireless access points. In that way, radio waves travel over shorter distances

3th IEEE/ACIS International Conference on Computer and Information Science

CERN Document Server

2015-01-01

This edited book presents scientific results of the 13th IEEE/ACIS International Conference on Computer and Information Science (ICIS 2014) which was held on June 4-6, 2014 in Taiyuan, China. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference.  The papers were chosen based on review scores submitted by members of the program committee, and underwent further rigorous rounds of review. This publication captures 14 of the conference’s most promis...

Performance Evaluations for IEEE 802.15.4-based IoT Smart Home Solution

Directory of Open Access Journals (Sweden)

Nga Dinh

2016-09-01

Full Text Available The Internet of Things (IoT is going to be a market-changing force for a variety of real-time applications such as e-healthcare, home automation, environmental monitoring, and industrial automation. Low power wireless communication protocols offering long lifetime and high reliability such as the IEEE 802.15.4 standard have been a key enabling technology for IoT deployments and are deployed for home automation recently. The issues of the IEEE 802.15.4 networks have moved from theory to real world deployments. The work presented herein intends to demonstrate the use of the IEEE 802.15.4 standard in recent IoT commercial products for smart home applications: the Smart Home Starter Kit. The contributions of the paper are twofold. First, the paper presents how the IEEE 802.15.4 standard is employed in Smart Home Starter Kit. In particular, network topology, network operations, and data transfer mode are investigated. Second, network performance metrics such as end-to-end (E2E delay and frame reception ratio (FRR are evaluated by experiments. In addition, the paper discusses several directions for future improvements of home automation commercial products.

IEEE Standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1980-01-01

This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1979 and IEEE Std 308-1978, can be demonstrated by using the procedures provided in this Standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other types batteries are beyond the scope of this Standard

2011 IEEE Vehicular Networking Conference (VNC): Demo Summaries

NARCIS (Netherlands)

Altintas, O.; Chen, W.; Heijenk, Geert; Dressler, F.; Ekici, E.; Kargl, Frank; Shigeno, H.; Dietzel, Stefan

2011-01-01

Foreword For the first time in its history, IEEE VNC has included this year’s demonstrations in its program. Demonstrations play an important role to expose the research community to practical aspects of research and to foster cross-fertilization among researchers both in academia and in industry.

Planning of Efficient Wireless Access with IEEE 802.16 for Connecting Home Network to the Internet

Directory of Open Access Journals (Sweden)

Pichet Ritthisoonthorn

2010-01-01

Full Text Available The emergence of IEEE802.16 wireless standard technology (WiMAX has significantly increased the choice to operators for the provisioning of wireless broadband access network. WiMAX is being deployed to compliment with xDSL in underserved or lack of the broadband network area, in both developed and developing countries. Many incumbent operators in developing countries are considering the deployment of WiMAX as part of their broadband access strategy. This paper presents an efficient and simple method for planning of broadband fixed wireless access (BFWA with IEEE802.16 standard to support home connection to Internet. The study formulates the framework for planning both coverage and capacity designs. The relationship between coverage area and access rate from subscriber in each environment area is presented. The study also presents the throughput and channel capacity of IEEE802.16 in different access rates. An extensive analysis is performed and the results are applied to the real case study to demonstrate the practicality of using IEEE 802.16 for connecting home to Internet. Using empirical data and original subscriber traffic from measurement, it is shown that the BFWA with IEEE802.16 standard is a capacity limited system. The capacity of IEEE802.16 is related to different factors including frequency bandwidth, spectrum allocation, estimation of traffic per subscriber, and choice of adaptive modulation from subscriber terminal. The wireless access methods and procedures evolved in this research work and set out in this paper are shown to be well suited for planning BFWA system based on IEEE802.16 which supports broadband home to Internet connections.

Performance of the IEEE 802.3 EPON registration scheme under high load

Science.gov (United States)

Bhatia, Swapnil P.; Bartos, Radim

2004-09-01

The proposed standard for the IEEE 802.3 Ethernet Passive Optical Network includes a random delayed transmission scheme for registration of new nodes. Although the scheme performs well on low loads, our simulation demonstrates the degraded and undesirable performance of the scheme at higher loads. We propose a simple modification to the current scheme that increases its range of operation and is compatible with the IEEE draft standard. We demonstrate the improvement in performance gained without any significant increase in registration delay.

Energy production systems engineering

CERN Document Server

Blair, Thomas Howard

2017-01-01

Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

VARNOST BREZŽIČNIH OMREŽIJ PO STANDARDU IEEE 802.11

OpenAIRE

Štumberger, Matej

2013-01-01

Diplomska naloga se osredotoča na problem varovanja brezžičnih omrežij, zasnovanih po standardu IEEE 802.11. Opisano je združenje IEEE in njihova specifikacija standardov z oznako 802, prav tako pa so opisani tudi standardi, protokoli in tehnike varovanja in zaščite omrežij, ki delujejo po tej specifikaciji. Predstavljeno je tudi trenutno stanje varnosti brezžičnih omrežij na področju mesta Ptuj, opisani in prikazani pa so tudi različni pristopi za zlorabo brezžičnih omrežij, skupaj s program...

International Conference on Grey Systems and intelligent Services (IEEE GSIS 2009)

CERN Document Server

Liu, Sifeng; Advances in Grey Systems Research

2010-01-01

This book contains contributions by some of the leading researchers in the area of grey systems theory and applications. All the papers included in this volume are selected from the contributions physically presented at the 2009 IEEE International Conference on Grey Systems and Intelligent Services, November 11 – 12, 2009, Nanjing, Jiangsu, People’s Republic of China. This event was jointly sponsored by IEEE Systems, Man, and Cybernetics Society, Natural Science Foundation of China, and Grey Systems Society of China. Additionally, Nanjing University of Aeronautics and Astronautics also invested heavily in this event with its direct and indirect financial and administrative supports.

Segmentized Clear Channel Assessment for IEEE 802.15.4 Networks.

Science.gov (United States)

Son, Kyou Jung; Hong, Sung Hyeuck; Moon, Seong-Pil; Chang, Tae Gyu; Cho, Hanjin

2016-06-03

This paper proposed segmentized clear channel assessment (CCA) which increases the performance of IEEE 802.15.4 networks by improving carrier sense multiple access with collision avoidance (CSMA/CA). Improving CSMA/CA is important because the low-power consumption feature and throughput performance of IEEE 802.15.4 are greatly affected by CSMA/CA behavior. To improve the performance of CSMA/CA, this paper focused on increasing the chance to transmit a packet by assessing precise channel status. The previous method used in CCA, which is employed by CSMA/CA, assesses the channel by measuring the energy level of the channel. However, this method shows limited channel assessing behavior, which comes from simple threshold dependent channel busy evaluation. The proposed method solves this limited channel decision problem by dividing CCA into two groups. Two groups of CCA compare their energy levels to get precise channel status. To evaluate the performance of the segmentized CCA method, a Markov chain model has been developed. The validation of analytic results is confirmed by comparing them with simulation results. Additionally, simulation results show the proposed method is improving a maximum 8.76% of throughput and decreasing a maximum 3.9% of the average number of CCAs per packet transmission than the IEEE 802.15.4 CCA method.

Real-time-service-based Distributed Scheduling Scheme for IEEE 802.16j Networks

OpenAIRE

Kuo-Feng Huang; Shih-Jung Wu

2013-01-01

Supporting Quality of Service (QoS) guarantees for diverse multimedia services is the primary concern for IEEE802.16j networks. A scheduling scheme that satisfies the QoS requirements has become more important for wireless communications. We proposed an adaptive nontransparent-based distributed scheduling scheme (ANDS) for IEEE 802.16j networks. ANDS comprises three major components: Priority Assignment, Resource Allocation, Preserved Bandwidth Adjustment. Different service-type connections p...

Application of IEEE 1588 to the real-time control system of accelerator

International Nuclear Information System (INIS)

Ma Mingchao; Chen Jianfeng; Shen Liren; Jiang Geyang

2014-01-01

Background: Time synchronization is one of the core technology of realizing the real-time control of accelerator under the distributed control system architecture. The ordinary crystal frequency deviation of IEEE 1588 causes low synchronous accuracy, which doesn't meet the needs of high precision synchronization. Purpose: This paper proposes an algorithm to improve the synchronization precision caused by the crystal frequency deviation. Methods: According to the basic principle of IEEE 1588 time synchronization, a dynamic frequency compensation (DFC) algorithm module was designed and a test platform was built to verify the feasibility and practicability of the algorithm. The influence of the synchronous cycle and delay jitter of the switch on the synchronization accuracy were analyzed. Results: Experimental results showed the great precision improvement of synchronization after using DFC algorithm. Conclusion: Low synchronous accuracy caused by the crystal frequency deviation can be improved by using DFC algorithm implemented for precision time protocol (PTP) of IEEE 1588. (authors)

Engineering Design and Fabrication of an Ampere-Class Superconducting Photocathode Electron Gun

International Nuclear Information System (INIS)

Ben-Zvi, I.

2008-01-01

Over the past three years, Advanced Energy Systems and Brookhaven National Laboratory (BNL) have been collaborating on the design of an Ampere- class superconducting photocathode electron gun. BNL performed the physics design of the overall system and RF cavity under prior programs. Advanced Energy Systems (AES) is currently responsible for the engineering design and fabrication of the electron gun under contract to BNL. We will report on the engineering design and fabrication status of the superconducting photocathode electron gun. The overall configuration of the cryomodule will be reviewed. The layout of the hermitic string, space frame, shielding package, and cold mass will be discussed. The engineering design of the gun cavity and removable cathode will be presented in detail and areas of technical risk will be highlighted. Finally, the fabrication sequence and fabrication status of the gun cavity will be discussed

Multiple choice questions in electronics and electrical engineering

CERN Document Server

DAVIES, T J

2013-01-01

A unique compendium of over 2000 multiple choice questions for students of electronics and electrical engineering. This book is designed for the following City and Guilds courses: 2010, 2240, 2320, 2360. It can also be used as a resource for practice questions for any vocational course.

An integrated framework to support remote IEEE 1149.1 / 1149.4 design for test experiments

Directory of Open Access Journals (Sweden)

Antonio M. Cardoso

2006-08-01

Full Text Available Remote experiments for academic purposes can only achieve their educational goals if an appropriate framework is able to provide a basic set of features, namely remote laboratory management, collaborative learning tools and content management and delivery. This paper presents a framework developed to support remote experiments in a design for test class offered to final year students at the Electrical and Computer Engineering degree at the University of Porto. The proposed solution combines a test language command interpreter and various virtual instruments (VIs, with a demonstration board that comprises a boundary-scan IEEE 1149.1 / 1149.4 test infrastructure. The experiments are presented as embedded learning objects, with no distinction from other e-learning contents (e.g. lessons, lecture notes, etc..

Integrated System Health Management: Pilot Operational Implementation in a Rocket Engine Test Stand

Science.gov (United States)

Figueroa, Fernando; Schmalzel, John L.; Morris, Jonathan A.; Turowski, Mark P.; Franzl, Richard

2010-01-01

This paper describes a credible implementation of integrated system health management (ISHM) capability, as a pilot operational system. Important core elements that make possible fielding and evolution of ISHM capability have been validated in a rocket engine test stand, encompassing all phases of operation: stand-by, pre-test, test, and post-test. The core elements include an architecture (hardware/software) for ISHM, gateways for streaming real-time data from the data acquisition system into the ISHM system, automated configuration management employing transducer electronic data sheets (TEDS?s) adhering to the IEEE 1451.4 Standard for Smart Sensors and Actuators, broadcasting and capture of sensor measurements and health information adhering to the IEEE 1451.1 Standard for Smart Sensors and Actuators, user interfaces for management of redlines/bluelines, and establishment of a health assessment database system (HADS) and browser for extensive post-test analysis. The ISHM system was installed in the Test Control Room, where test operators were exposed to the capability. All functionalities of the pilot implementation were validated during testing and in post-test data streaming through the ISHM system. The implementation enabled significant improvements in awareness about the status of the test stand, and events and their causes/consequences. The architecture and software elements embody a systems engineering, knowledge-based approach; in conjunction with object-oriented environments. These qualities are permitting systematic augmentation of the capability and scaling to encompass other subsystems.

DSP-based electric power assisted steering using BLDC motor

Indian Academy of Sciences (India)

Bharat Electronics Limited, Nandambakkam, Chennai 600 089 e-mail: ... engine speed sensor, vehicle speed sensor, steering column, torsion bar and electronic control unit. Figure 1. .... IEEE Trans. on Industry Application 26(6):. 1144–1157.

An Authentication and Key Management Mechanism for Resource Constrained Devices in IEEE 802.11-based IoT Access Networks

OpenAIRE

Kim, Ki-Wook; Han, Youn-Hee; Min, Sung-Gi

2017-01-01

Many Internet of Things (IoT) services utilize an IoT access network to connect small devices with remote servers. They can share an access network with standard communication technology, such as IEEE 802.11ah. However, an authentication and key management (AKM) mechanism for resource constrained IoT devices using IEEE 802.11ah has not been proposed as yet. We therefore propose a new AKM mechanism for an IoT access network, which is based on IEEE 802.11 key management with the IEEE 802.1X aut...

Information Technology in project-organized electronic and computer technology engineering education

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

1999-01-01

This paper describes the integration of IT in the education of electronic and computer technology engineers at Institute of Electronic Systems, Aalborg Uni-versity, Denmark. At the Institute Information Technology is an important tool in the aspects of the education as well as for communication...

An SNMP-based solution to enable remote ISO/IEEE 11073 technical management.

Science.gov (United States)

Lasierra, Nelia; Alesanco, Alvaro; García, José

2012-07-01

This paper presents the design and implementation of an architecture based on the integration of simple network management protocol version 3 (SNMPv3) and the standard ISO/IEEE 11073 (X73) to manage technical information in home-based telemonitoring scenarios. This architecture includes the development of an SNMPv3-proxyX73 agent which comprises a management information base (MIB) module adapted to X73. In the proposed scenario, medical devices (MDs) send information to a concentrator device [designated as compute engine (CE)] using the X73 standard. This information together with extra information collected in the CE is stored in the developed MIB. Finally, the information collected is available for remote access via SNMP connection. Moreover, alarms and events can be configured by an external manager in order to provide warnings of irregularities in the MDs' technical performance evaluation. This proposed SNMPv3 agent provides a solution to integrate and unify technical device management in home-based telemonitoring scenarios fully adapted to X73.

Electronic journals: Their use by teachers/researchers of engineering and social sciences

International Nuclear Information System (INIS)

Martins, Fernanda; Machado, Diana; Fernandes, Alberto; Ribeiro, Fernanda

2015-01-01

Libraries must attend the needs of their different users. Academics are usually a particular kind of users with specific needs. Universities are environments where scientific communication is essential and where electronic format of journals is becoming more and more frequently used. This way it becomes increasingly important to understand how academics from different scientific areas use the available electronic resources. The aim of this study is to better understand the existing differences among the users of electronic journals in Engineering and Social Sciences. The research undertaken was mainly focused on the study of the use of electronic journals by teachers/researchers from the Faculties of Engineering and of Arts from the University of Porto, Portugal. In this study an international survey was used in order to characterize the levels of use and access of electronic journals by these communities. The ways of seeking and using scientific information, namely in terms frequency of access, the number of articles consulted, the use of databases and the preference of publishing in electronic journals were analyzed. A set of comparisons were established and results indicate an extensive use of the electronic format, regardless the faculty. However, some differences emerge when it comes to details. Such is the case of the usage rate of reference management software which is considerably more used by Engineering academics than Social Science ones. Generally, electronic journals meeting the information needs of its users and are increasingly used as a preferred means of research. Though, some particular differences in the use of them have emerged, when comparing academics from these two faculties

Electronic journals: Their use by teachers/researchers of engineering and social sciences

Energy Technology Data Exchange (ETDEWEB)

Martins, Fernanda, E-mail: mmartins@letras.up.pt; Machado, Diana, E-mail: mmartins@letras.up.pt; Fernandes, Alberto, E-mail: mmartins@letras.up.pt; Ribeiro, Fernanda, E-mail: mmartins@letras.up.pt [Faculdade de Letras da Universidade do Porto (Portugal)

2015-02-09

Libraries must attend the needs of their different users. Academics are usually a particular kind of users with specific needs. Universities are environments where scientific communication is essential and where electronic format of journals is becoming more and more frequently used. This way it becomes increasingly important to understand how academics from different scientific areas use the available electronic resources. The aim of this study is to better understand the existing differences among the users of electronic journals in Engineering and Social Sciences. The research undertaken was mainly focused on the study of the use of electronic journals by teachers/researchers from the Faculties of Engineering and of Arts from the University of Porto, Portugal. In this study an international survey was used in order to characterize the levels of use and access of electronic journals by these communities. The ways of seeking and using scientific information, namely in terms frequency of access, the number of articles consulted, the use of databases and the preference of publishing in electronic journals were analyzed. A set of comparisons were established and results indicate an extensive use of the electronic format, regardless the faculty. However, some differences emerge when it comes to details. Such is the case of the usage rate of reference management software which is considerably more used by Engineering academics than Social Science ones. Generally, electronic journals meeting the information needs of its users and are increasingly used as a preferred means of research. Though, some particular differences in the use of them have emerged, when comparing academics from these two faculties.

Enhancing gold recovery from electronic waste via lixiviant metabolic engineering in Chromobacterium violaceum

Science.gov (United States)

Tay, Song Buck; Natarajan, Gayathri; Rahim, Muhammad Nadjad bin Abdul; Tan, Hwee Tong; Chung, Maxey Ching Ming; Ting, Yen Peng; Yew, Wen Shan

2013-01-01

Conventional leaching (extraction) methods for gold recovery from electronic waste involve the use of strong acids and pose considerable threat to the environment. The alternative use of bioleaching microbes for gold recovery is non-pollutive and relies on the secretion of a lixiviant or (bio)chemical such as cyanide for extraction of gold from electronic waste. However, widespread industrial use of bioleaching microbes has been constrained by the limited cyanogenic capabilities of lixiviant-producing microorganisms such as Chromobacterium violaceum. Here we show the construction of a metabolically-engineered strain of Chromobacterium violaceum that produces more (70%) cyanide lixiviant and recovers more than twice as much gold from electronic waste compared to wild-type bacteria. Comparative proteome analyses suggested the possibility of further enhancement in cyanogenesis through subsequent metabolic engineering. Our results demonstrated the utility of lixiviant metabolic engineering in the construction of enhanced bioleaching microbes for the bioleaching of precious metals from electronic waste. PMID:23868689

Design of handoff procedures for broadband wireless access IEEE 802.16 based networks

Directory of Open Access Journals (Sweden)

V. Rangel–Licea

2008-01-01

Full Text Available IEEE 802.16 is a protocol for fixed broad band wire less access that is currently trying to add mobility among mobile users in the standard. However, mobility adds some technical barriers that should be solved first, this is the case of HO "handoff" (change of connection between two base stations "BS" by a mobile user. In this paper, the problem of HO in IEEE 802.16 is approached try ing to maintain the quality of service (QoS of mobile users. A mechanism for changing connection during HO is pre sented. A simulation model based on OPNET MODELER1 was developed to evaluate the performance of the proposed HO mechanism. Finally, this paper demonstrates that it is possible to implement a seam less HO mech a nism over IEEE 802.16 even for users with de manding applications such as voice over IP.

Study of Allocation Guaranteed Time Slot Wireless Body Area Networks Based on IEEE 802.15.4

Science.gov (United States)

Yundra, E.; Harsono, G. D.

2018-04-01

This paper aims to determine the size of the Guaranteed Time Slot (GTS) on the super frame structure required for each sensor as well as to know the performance of the GTS resized system compared to the GTS standard on IEEE 802.15.4. This article proposes a scheme to improve IEEE 802.15.4 medium access control, called allocation Guaranteed Time Slot (ALGATIS). ALGATIS is expected to effectively allocate guaranteed time slot to the requested sensors, it adjusts the length of the slot in super frame duration based on the length of the packet data. This article presents a simulation experiment of IEEE 802.15.4, especially for star network, to predict the throughput of networks and average energy consumption. The simulation experiments show that the performance of ALGATIS is better than that of IEEE 802.15.4 standard in term of the throughput of networks and average energy consumption

A versatile trigger and synchronization module with IEEE1588 capabilities and EPICS support

International Nuclear Information System (INIS)

Lopez, J.M.; Ruiz, M.; Borrego, J.; Arcas, G. de; Barrera, E.; Vega, J.

2010-01-01

Event timing and synchronization are two key aspects to improve in the implementation of distributed data acquisition (dDAQ) systems such as the ones used in fusion experiments. It is also of great importance the integration of dDAQ in control and measurement networks. This paper analyzes the applicability of the IEEE1588 and EPICS standards to solve these problems, and presents a hardware module implementation based in both of them that allow adding these functionalities to any DAQ. The IEEE1588 standard facilitates the integration of event timing and synchronization mechanisms in distributed data acquisition systems based on IEEE 803.3 (Ethernet). An optimal implementation of such system requires the use of network interface devices which include specific hardware resources devoted to the IEE1588 functionalities. Unfortunately, this is not the approach followed in most of the large number of applications available nowadays. Therefore, most solutions are based in software and use standard hardware network interfaces. This paper presents the development of a hardware module (GI2E) with IEEE1588 capabilities which includes USB, RS232, RS485 and CAN interfaces. This permits to integrate any DAQ element that uses these interfaces in dDAQ systems in an efficient and simple way. The module has been developed with Motorola's Coldfire MCF5234 processor and National Semiconductors's PHY DP83640T, providing it with the possibility to implement the PTP protocol of IEEE1588 by hardware, and therefore increasing its performance over other implementations based in software. To facilitate the integration of the dDAQ system in control and measurement networks the module includes a basic Input/Output Controller (IOC) functionality of the Experimental Physics and Industrial Control System (EPICS) architecture. The paper discusses the implementation details of this module and presents its applications in advanced dDAQ applications in the fusion community.

Engineered Surfaces to Control Secondary Electron Yield for Multipactor Suppression

Science.gov (United States)

2017-09-14

Air Force Institute of Technology AFIT Scholar Theses and Dissertations 9-14-2017 Engineered Surfaces to Control Secondary Electron Yield for...Multipactor Suppression James M. Sattler Follow this and additional works at: https://scholar.afit.edu/etd Part of the Electrical and Electronics Commons... TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED

Proceedings of IEEE Machine Learning for Signal Processing Workshop XVI

DEFF Research Database (Denmark)

Larsen, Jan

These proceedings contains refereed papers presented at the sixteenth IEEE Workshop on Machine Learning for Signal Processing (MLSP'2006), held in Maynooth, Co. Kildare, Ireland, September 6-8, 2006. This is a continuation of the IEEE Workshops on Neural Networks for Signal Processing (NNSP......). The name of the Technical Committee, hence of the Workshop, was changed to Machine Learning for Signal Processing in September 2003 to better reflect the areas represented by the Technical Committee. The conference is organized by the Machine Learning for Signal Processing Technical Committee...... the same standard as the printed version and facilitates the reading and searching of the papers. The field of machine learning has matured considerably in both methodology and real-world application domains and has become particularly important for solution of problems in signal processing. As reflected...

Capacity Evaluation for IEEE 802.16e Mobile WiMAX

Directory of Open Access Journals (Sweden)

Chakchai So-In

2010-01-01

Full Text Available We present a simple analytical method for capacity evaluation of IEEE 802.16e Mobile WiMAX networks. Various overheads that impact the capacity are explained and methods to reduce these overheads are also presented. The advantage of a simple model is that the effect of each decision and sensitivity to various parameters can be seen easily. We illustrate the model by estimating the capacity for three sample applications—Mobile TV, VoIP, and data. The analysis process helps explain various features of IEEE 802.16e Mobile WiMAX. It is shown that proper use of overhead reducing mechanisms and proper scheduling can make an order of magnitude difference in performance. This capacity evaluation method can also be used for validation of simulation models.

Self-Coexistence among IEEE 802.22 Networks: Distributed Allocation of Power and Channel

OpenAIRE

Sayef Azad Sakin; Md. Abdur Razzaque; Mohammad Mehedi Hassan; Atif Alamri; Nguyen H. Tran; Giancarlo Fortino

2017-01-01

Ensuring self-coexistence among IEEE 802.22 networks is a challenging problem owing to opportunistic access of incumbent-free radio resources by users in co-located networks. In this study, we propose a fully-distributed non-cooperative approach to ensure self-coexistence in downlink channels of IEEE 802.22 networks. We formulate the self-coexistence problem as a mixed-integer non-linear optimization problem for maximizing the network data rate, which is an NP-hard one. This work explores a s...

78 FR 73239 - Small Generator Interconnection Agreements and Procedures

Science.gov (United States)

2013-12-05

... Electronics Engineers (IEEE) Standard 1547 for Interconnecting Distributed Resources with Electric Power... discriminatory manner.\\38\\ \\37\\ The Electricity Consumers Resource Council, American Chemistry Council, American...

PERFORMANCE STUDY OF DISTRIBUTED COORDINATION FUNCTION OVER IEEE 802.11A PHYSICAL LAYER

Directory of Open Access Journals (Sweden)

S. SELVAKENEDDY

2006-06-01

Full Text Available IEEE 802.11a is one of the latest standards to be released by the IEEE Project 802 for wireless LANs. It has specified an additional physical layer (PHY to support higher data rates, and is termed as the orthogonal frequency division multiplexing (OFDM. In order to exploit its benefits, one of the medium access control (MAC protocols specified in the IEEE 802.11 specification is called distributed coordination function (DCF. DCF is a carrier sense multiple access with collision avoidance (CSMA/CA scheme with slotted binary exponential backoff. The frames can be transmitted using the basic access scheme or the RTS/CTS scheme in DCF. It was demonstrated previously that the RTS/CTS mechanism works well in most scenarios for the previously specified PHYs. In this work, a simple simulator is developed to verify the scalability of the RTS/CTS mechanism over OFDM PHY, which supports much higher data rates.

IEEE 802.11e (EDCA analysis in the presence of hidden stations

Directory of Open Access Journals (Sweden)

Xijie Liu

2011-07-01

Full Text Available The key contribution of this paper is the combined analytical analysis of both saturated and non-saturated throughput of IEEE 802.11e networks in the presence of hidden stations. This approach is an extension to earlier works by other authors which provided Markov chain analysis to the IEEE 802.11 family under various assumptions. Our approach also modifies earlier expressions for the probability that a station transmits a packet in a vulnerable period. The numerical results provide the impact of the access categories on the channel throughput. Various throughput results under different mechanisms are presented.

The boundary-scan handbook

CERN Document Server

Parker, Kenneth P

2016-01-01

Aimed at electronics industry professionals, this 4th edition of the Boundary Scan Handbook describes recent changes to the IEEE1149.1 Standard Test Access Port and Boundary-Scan Architecture. This updated edition features new chapters on the possible effects of the changes on the work of the practicing test engineers and the new 1149.8.1 standard. Anyone needing to understand the basics of boundary scan and its practical industrial implementation will need this book. Provides an overview of the recent changes to the 1149.1 standard and the effect of the changes on the work of test engineers;   Explains the new IEEE 1149.8.1 subsidiary standard and applications;   Describes the latest updates on the supplementary IEEE testing standards. In particular, addresses: IEEE Std 1149.1                      Digital Boundary-Scan IEEE Std 1149.4                      Analog Boundary-Scan IEEE Std 1149.6                      Advanced I/O Testing IEEE Std 1149.8.1           �...

IEEE 802.11-Based Wireless Sensor System for Vibration Measurement

Directory of Open Access Journals (Sweden)

Yutaka Uchimura

2010-01-01

Full Text Available Network-based wireless sensing has become an important area of research and various new applications for remote sensing are expected to emerge. One of the promising applications is structural health monitoring of building or civil engineering structure and it often requires vibration measurement. For the vibration measurement via wireless network, time synchronization is indispensable. In this paper, we introduce a newly developed time synchronized wireless sensor network system. The system employs IEEE 802.11 standard-based TSF-counter and sends the measured data with the counter value. TSF based synchronization enables consistency on common clock among different wireless nodes. We consider the scale effect on synchronization accuracy and evaluated the effect by taking beacon collisions into account. The scalability issue by numerical simulations is also studied. This paper also introduces a newly developed wireless sensing system and the hardware and software specifications are introduced. The experiments were conducted in a reinforced concrete building to evaluate synchronization accuracy. The developed system was also applied for a vibration measurement of a 22-story steel structured high rise building. The experimental results showed that the system performed more than sufficiently.

Handbook of power systems engineering with power electronics applications

CERN Document Server

Hase, Yoshihide

2012-01-01

Formerly known as Handbook of Power System Engineering, this second edition provides rigorous revisions to the original treatment of systems analysis together with a substantial new four-chapter section on power electronics applications. Encompassing a whole range of equipment, phenomena, and analytical approaches, this handbook offers a complete overview of power systems and their power electronics applications, and presents a thorough examination of the fundamental principles, combining theories and technologies that are usually treated in separate specialised fields, in a single u

Reactive GTS Allocation Protocol for Sporadic Events Using the IEEE 802.15.4

Directory of Open Access Journals (Sweden)

Mukhtar Azeem

2014-01-01

by the IEEE 802.15.4 standard. The proposed control protocol ensures that a given offline sporadic schedule can be adapted online in a timely manner such that the static periodic schedule has not been disturbed and the IEEE 802.15.4 standard compliance remains intact. The proposed protocol is simulated in OPNET. The simulation results are analyzed and presented in this paper to prove the correctness of the proposed protocol regarding the efficient real-time sporadic event delivery along with the periodic event propagation.

Development of educational complex on electrical engineering, electronics and microcon-trollers on modeling in TINA software

Directory of Open Access Journals (Sweden)

Vladimir A. Alekhin

2017-01-01

Full Text Available The study of electrical engineering, electronics and microcontrollers in accordance with federal state educational standards requires from students the practical mastering of experimental methods for the study of electrical circuits and electronic circuits, the formation of competences and skills in the calculation of electrical circuits and electronic circuits. The modern development of information educational technologies, the widespread use of a variety of computer facilities by students in reducing teaching hours for the study of disciplines make it necessary to create new multimedia training complexes, using computer simulation of electrical circuits, electronic circuits and microcontrollers in the lecture process and in the laboratory and practical exercises. The purpose of the research was a comparative analysis of various computer simulation programs in terms of their accessibility, ease of development and efficiency of use by lecturers and students in the educational process, and the creation and testing of a training complex for the electrical engineering, electronics and microcontrollers using the selected modeling environment.The problems associated with the need to purchase licensed software were discussed and a comparative analysis of the following computer modeling programs for electrical circuits and electronic circuits was performed: NI Multisim, Micro-Cap, Proteus VSM, OrCAD, TINA. The research method included the study of these modeling and design programs, writing of teaching aids and conducting of training sessions with students. The cost of licenses for the software application in computer classes and on students’ home computers was estimated. As a result, the conclusion was confirmed about the advisability of using the free student program of computer modeling TINA-TI and the TINACloud environment from DesignSoft for the teaching of electrical engineering and electronics.The new software product TINACloud uses cloud

Experimental realization of a Szilard engine with a single electron.

Science.gov (United States)

Koski, Jonne V; Maisi, Ville F; Pekola, Jukka P; Averin, Dmitri V

2014-09-23

The most succinct manifestation of the second law of thermodynamics is the limitation imposed by the Landauer principle on the amount of heat a Maxwell demon (MD) can convert into free energy per single bit of information obtained in a measurement. We propose and realize an electronic MD based on a single-electron box operated as a Szilard engine, where kBT ln 2 of heat is extracted from the reservoir at temperature T per one bit of created information. The information is encoded in the position of an extra electron in the box.

Theory and Practice: thinking styles in engineering and science

Directory of Open Access Journals (Sweden)

Hanspeter Schmid

2001-11-01

Full Text Available This paper describes knowledge as an element of thinking styles, which are properties of thinking collectives. According to the theory outlined here, the choice of a thinking style to solve a certain problem is relative, but once the thinking has been chosen, realism prevails. This paper also describes the genesis and development of thinking styles and, with them, of facts. The theoretical concepts are illustrated with two examples of thinking styles: a description of the thinking styles of circuit theorists and circuit designers (theory vs. practice, and a comparison of the thinking styles of two closely related technical societies of the Institute of Electrical and Electronics Engineers (IEEE. Applications of the theory are also presented in this paper; they include information management, documentation tools, and writing styles, and mainly draw from the author's own experience with these topics.

Structured electron beams from nano-engineered cathodes

Energy Technology Data Exchange (ETDEWEB)

Lueangaramwong, A. [NICADD, DeKalb; Mihalcea, D. [NICADD, DeKalb; Andonian, G. [RadiaBeam Tech.; Piot, P. [Fermilab

2017-03-07

The ability to engineer cathodes at the nano-scale have open new possibilities such as enhancing quantum eciency via surface-plasmon excitation, forming ultra-low-emittance beams, or producing structured electron beams. In this paper we present numerical investigations of the beam dynamics associated to this class of cathode in the weak- and strong-field regimes.We finally discuss the possible applications of some of the achievable cathode patterns when coupled with other phase space manipulations.

On IEEE 802.15.6 IR-UWB receivers - simulations for DBPSK modulation.

Science.gov (United States)

Niemelä, Ville; Hämäläinen, Matti; Iinatti, Jari

2013-01-01

In 2002, Federal Communications Commission (FCC) was the first in defining regulations for ultra wideband (UWB) communications followed by Europe and Japan some years later. Focusing on impulse radio (IR) UWB, in 2007 was the time for the first published standard targeting in personal area networks, released by the IEEE. The second IEEE released standard including UWB definitions is targeted for wireless body area networks (WBAN) and was published in 2012. As the wireless communications has been and will be passing through almost any levels in society, the natural step with WBAN is using it in different medical, healthcare and wellbeing applications. The arguments for these are related to the modern lifestyle, in which people have increasingly more free time and are more interested in taking care of their health and wellbeing. Another challenge is the population composition, i.e., aging in developed countries which call for new solutions and procedures, particularly from cost wise. In this paper, we are evaluating UWB receivers based on the IEEE 802.15.6 physical layer definitions and capable of detecting differentially encoded modulation. The evaluation is performed using two different WBAN channel models.

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

Science.gov (United States)

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

Electron heating in low pressure capacitive discharges revisited

Energy Technology Data Exchange (ETDEWEB)

Kawamura, E.; Lieberman, M. A.; Lichtenberg, A. J. [Department of Electrical Engineering and Computer Sciences University of California, Berkeley, California 94720 (United States)

2014-12-15

The electrons in capacitively coupled plasmas (CCPs) absorb energy via ohmic heating due to electron-neutral collisions and stochastic heating due to momentum transfer from high voltage moving sheaths. We use Particle-in-Cell (PIC) simulations to explore these heating mechanisms and to compare the PIC results with available theories on ohmic and stochastic heating. The PIC results for ohmic heating show good agreement with the ohmic heating calculation of Lafleur et al. [Phys. Plasmas 20, 124503 (2013)]. The PIC results for stochastic heating in low pressure CCPs with collisionless sheaths show good agreement with the stochastic heating model of Kaganovich et al. [IEEE Trans. Plasma Sci. 34, 696 (2006)], which revises the hard wall asymptotic model of Lieberman [IEEE Trans. Plasma Sci. 16, 638 (1988)] by taking current continuity and bulk oscillation into account.

Electron heating in low pressure capacitive discharges revisited

International Nuclear Information System (INIS)

Kawamura, E.; Lieberman, M. A.; Lichtenberg, A. J.

2014-01-01

The electrons in capacitively coupled plasmas (CCPs) absorb energy via ohmic heating due to electron-neutral collisions and stochastic heating due to momentum transfer from high voltage moving sheaths. We use Particle-in-Cell (PIC) simulations to explore these heating mechanisms and to compare the PIC results with available theories on ohmic and stochastic heating. The PIC results for ohmic heating show good agreement with the ohmic heating calculation of Lafleur et al. [Phys. Plasmas 20, 124503 (2013)]. The PIC results for stochastic heating in low pressure CCPs with collisionless sheaths show good agreement with the stochastic heating model of Kaganovich et al. [IEEE Trans. Plasma Sci. 34, 696 (2006)], which revises the hard wall asymptotic model of Lieberman [IEEE Trans. Plasma Sci. 16, 638 (1988)] by taking current continuity and bulk oscillation into account

Electron heating in low pressure capacitive discharges revisited

Science.gov (United States)

Kawamura, E.; Lieberman, M. A.; Lichtenberg, A. J.

2014-12-01

The electrons in capacitively coupled plasmas (CCPs) absorb energy via ohmic heating due to electron-neutral collisions and stochastic heating due to momentum transfer from high voltage moving sheaths. We use Particle-in-Cell (PIC) simulations to explore these heating mechanisms and to compare the PIC results with available theories on ohmic and stochastic heating. The PIC results for ohmic heating show good agreement with the ohmic heating calculation of Lafleur et al. [Phys. Plasmas 20, 124503 (2013)]. The PIC results for stochastic heating in low pressure CCPs with collisionless sheaths show good agreement with the stochastic heating model of Kaganovich et al. [IEEE Trans. Plasma Sci. 34, 696 (2006)], which revises the hard wall asymptotic model of Lieberman [IEEE Trans. Plasma Sci. 16, 638 (1988)] by taking current continuity and bulk oscillation into account.

An Authentication and Key Management Mechanism for Resource Constrained Devices in IEEE 802.11-based IoT Access Networks

Directory of Open Access Journals (Sweden)

Ki-Wook Kim

2017-09-01

Full Text Available Many Internet of Things (IoT services utilize an IoT access network to connect small devices with remote servers. They can share an access network with standard communication technology, such as IEEE 802.11ah. However, an authentication and key management (AKM mechanism for resource constrained IoT devices using IEEE 802.11ah has not been proposed as yet. We therefore propose a new AKM mechanism for an IoT access network, which is based on IEEE 802.11 key management with the IEEE 802.1X authentication mechanism. The proposed AKM mechanism does not require any pre-configured security information between the access network domain and the IoT service domain. It considers the resource constraints of IoT devices, allowing IoT devices to delegate the burden of AKM processes to a powerful agent. The agent has sufficient power to support various authentication methods for the access point, and it performs cryptographic functions for the IoT devices. Performance analysis shows that the proposed mechanism greatly reduces computation costs, network costs, and memory usage of the resource-constrained IoT device as compared to the existing IEEE 802.11 Key Management with the IEEE 802.1X authentication mechanism.

An Authentication and Key Management Mechanism for Resource Constrained Devices in IEEE 802.11-based IoT Access Networks.

Science.gov (United States)

Kim, Ki-Wook; Han, Youn-Hee; Min, Sung-Gi

2017-09-21

Many Internet of Things (IoT) services utilize an IoT access network to connect small devices with remote servers. They can share an access network with standard communication technology, such as IEEE 802.11ah. However, an authentication and key management (AKM) mechanism for resource constrained IoT devices using IEEE 802.11ah has not been proposed as yet. We therefore propose a new AKM mechanism for an IoT access network, which is based on IEEE 802.11 key management with the IEEE 802.1X authentication mechanism. The proposed AKM mechanism does not require any pre-configured security information between the access network domain and the IoT service domain. It considers the resource constraints of IoT devices, allowing IoT devices to delegate the burden of AKM processes to a powerful agent. The agent has sufficient power to support various authentication methods for the access point, and it performs cryptographic functions for the IoT devices. Performance analysis shows that the proposed mechanism greatly reduces computation costs, network costs, and memory usage of the resource-constrained IoT device as compared to the existing IEEE 802.11 Key Management with the IEEE 802.1X authentication mechanism.

An analytical model for the performance analysis of concurrent transmission in IEEE 802.15.4.

Science.gov (United States)

Gezer, Cengiz; Zanella, Alberto; Verdone, Roberto

2014-03-20

Interference is a serious cause of performance degradation for IEEE802.15.4 devices. The effect of concurrent transmissions in IEEE 802.15.4 has been generally investigated by means of simulation or experimental activities. In this paper, a mathematical framework for the derivation of chip, symbol and packet error probability of a typical IEEE 802.15.4 receiver in the presence of interference is proposed. Both non-coherent and coherent demodulation schemes are considered by our model under the assumption of the absence of thermal noise. Simulation results are also added to assess the validity of the mathematical framework when the effect of thermal noise cannot be neglected. Numerical results show that the proposed analysis is in agreement with the measurement results on the literature under realistic working conditions.

0011-0030.Data Representation amp Computer Arithmetic6 IEEE ...

Indian Academy of Sciences (India)

Home; public; Volumes; reso; 021; 01; 0011-0030.Data Representation amp Computer Arithmetic6 IEEE Standard Double Precision FormatIn.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News.

76 FR 55293 - Special Conditions: Diamond Aircraft Industries, Model DA-40NG; Electronic Engine Control (EEC...

Science.gov (United States)

2011-09-07

... with an electronic engine control (EEC), also known as a Full Authority Digital Engine Control (FADEC... engine design certification, and the certification requirements for engine control systems are driven by... aircraft supplied power and data failures on the engine control system, and the resulting effects on engine...

Study on Additional Carrier Sensing for IEEE 802.15.4 Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Bih-Hwang Lee

2010-06-01

Full Text Available Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs. The slotted carrier sense multiple access with collision avoidance (CSMA/CA is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC delay and power consumption of CCA detection.

Study on additional carrier sensing for IEEE 802.15.4 wireless sensor networks.

Science.gov (United States)

Lee, Bih-Hwang; Lai, Ruei-Lung; Wu, Huai-Kuei; Wong, Chi-Ming

2010-01-01

Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs). The slotted carrier sense multiple access with collision avoidance (CSMA/CA) is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA) detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS) algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC) delay and power consumption of CCA detection.

IEEE P1596, a scalable coherent interface for GigaByte/sec multiprocessor applications

International Nuclear Information System (INIS)

Gustavson, D.B.

1988-11-01

IEEE P1596, the Scalable Coherent Interface (formerly known as SuperBus) is based on experience gained during the development of Fastbus (IEEE 960), Futurebus (IEEE 896.1) and other modern 32-bit buses. SCI goals include a minimum bandwidth of 1 GByte/sec per processor; efficient support of a coherent distributed-cache image of shared memory; and support for segmentation, bus repeaters and general switched interconnections like Banyan, Omega, or full crossbar networks. To achieve these ambitious goals, SCI must sacrifice the immediate handshake characteristic of the present generation of buses in favor of a packet-like split-cycle protocol. Wire-ORs, broadcasts, and even ordinary passive bus structures are to be avoided. However, a lower performance (1 GByte/sec per backplane instead of per processor) implementation using a register insertion ring architecture on a passive ''backplane'' appears to be possible using the same interface as for the more costly switch networks. This paper presents a summary of current directions, and reports the status of the work in progress

Inseneriharidus: vaja on liikuda kõrgema kvaliteedi ja uuenduslikkuse suunas / Hants Kipper

Index Scriptorium Estoniae

Kipper, Hants

2015-01-01

17.-20. märtsini toimus Tallinna tehnikaülikoolis rahvusvahelise inseneride ühingu IEEE (Institute of Electrical and Electronics Engineers) ülemaailmne insenerihariduse arengule pühendatud aastakonverents EDUCON2015, teemaks „Inseneriharidus tipptaseme ja uuenduste suunas” („Engineering Education towards Excellence and Innovation”)

SiGe-based re-engineering of electronic warfare subsystems

CERN Document Server

Lambrechts, Wynand

2017-01-01

This book equips readers with a thorough understanding of the applicability of new-generation silicon-germanium (SiGe) electronic subsystems for the military purposes of electronic warfare and defensive countermeasures. The theoretical and technical background is extensively explained and all aspects of the integration of SiGe as an enabling technology for maritime, land, and airborne (including space) electronic warfare are addressed, including research, design, development, and implementation. The coverage is supported by mathematical derivations, informative illustrations, practical examples, and case studies. While SiGe technology provides speed, performance, and price advantages in many markets, sharing of information on its use in electronic warfare systems has to date been limited, especially in developing nations. This book will therefore be warmly welcomed as an engineering guideline that focuses especially on the speed and reliability of current-generation SiGe circuits and highlights emerging innov...

The Exploration of Network Coding in IEEE 802.15.4 Networks

Directory of Open Access Journals (Sweden)

Deze Zeng

2011-01-01

communication protocol should be energy efficient. The IEEE 802.15.4 is designed as a standard protocol for low power, low data rate, low complexity, and short range connections in WPANs. The standard supports allocating several numbers of collision-free guarantee time slots (GTSs within a superframe for some time-critical transmissions. Recently, COPE was proposed as a promising network coding architecture to essentially improve the throughput of wireless networks. In this paper, we exploit the network coding technique at coordinators to improve energy efficiency of the WPAN. Some related practical issues, such as GTS allocation and multicast, are also discussed in order to exploit the network coding opportunities efficiently. Since the coding opportunities are mostly exploited, our proposal achieves both higher energy efficiency and throughput performance than the original IEEE 802.15.4.

Qualification of cables to IEEE standards 323-1974 and 383-1974

International Nuclear Information System (INIS)

Hosticka, C.; Kingsbury, E.R.; Bruhin, A.C.

1980-01-01

Wire and Cable manufacturers generally qualify products for class IE application by envelope type testing to user specifications and environmental conditions recommended by IEEE Standards 323-1974 and 383-1974. The General Electric Wire and Cable Business Department recently completed two such qualification programs. Cable constructions tested were 600V control cables and 600 V, 2kV, and 15kV power cables insulated with flame resistant mineral filled crosslinked polyethylene. The 15kV samples included taped field splices. In the second test program, the steam pressure-temperature profile included a simulated main steam line break. Test specimens were wrapped on grounded mandrels and were electrically loaded throughout the simulated LOCA tests. After completion of environmental testing, samples were subjected to the IEEE 383 simulated post-LOCA test. 6 refs

Qualification of cables to IEEE standards 323-1974 and 383-1974

International Nuclear Information System (INIS)

Hosticka, C.; Kingsbury, E.R.; Bruhin, A.C.

1980-01-01

Wire and Cable manufacturers generally qualify products for class IE application by envelope type testing to user specifications and environmental conditions recommended by IEEE Standards 323-1974 and 383-1974. The General Electric Wire and Cable Business Department recently completed two such qualification programs. Cable constructions tested were 600V control cables and 600 V, 2KV, and 15KV power cables insulated with flame resistant mineral filled crosslinked polyethylene. The 15KV samples included taped field splices. In the second test program, the steam pressure-temperature profile included a simulated main steam line break. Test specimens were wrapped on grounded mandrels and were electrically loaded throughout the simulated LOCA tests. After completion of environmental testing, samples were subjected to the IEEE 383 simulated post-LOCA test. 6 refs

The scalable coherent interface, IEEE P1596, status and possible applications to data acquisition and physics

International Nuclear Information System (INIS)

Gustavson, D.B.

1990-01-01

IEEE P1596, the Scalable Coherent Interface (formerly known as SuperBus) is based on experience gained while developing Fastbus (ANSI/IEEE 960-1986, IEC 935), Futurebus (IEEE P896.x) and other modern 32-bit buses. SCI goals include a minimum bandwidth of 1 GByte/sec per processor in multiprocessor systems with thousands of processors; efficient support of a coherent distributed-cache image of distributed shared memory; support for repeaters which interface to existing or future buses; and support for inexpensive small rings as well as for general switched interconnections like Banyan, Omega, or crossbar networks. This paper presents a summary of current directions, reports the status of the work in progress, and suggests some applications in data acquisition and physics. 7 refs

Defending IEEE 802.11-Based Networks Against Denial Of Service Attacks

National Research Council Canada - National Science Library

Tan, Boon

2003-01-01

The convenience of IEEE 8O2.11-based wireless access networks has led to widespread deployment in the consumer, industrial and military sectors However, this use is predicated on an implicit assumption of confidentiality...

A Case Study : Application of the Systems Engineering Modeling in the early phases of a Complex Space System Project

NARCIS (Netherlands)

Bone, M.; Cloutier, R.L.; Gill, E.K.A.; Verma, D.

2009-01-01

There is increased recognition of the role of systems engineering in reducing the risk (technical, cost, and schedule) on complex space systems development and integration projects. A number of international systems engineering standards have been published in the last five years (ISO 15288, IEEE

Training in software used by practising engineers should be included in university curricula

Science.gov (United States)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors

A Study of IEEE 802.15.4 Security Framework for Wireless Body Area Networks

Directory of Open Access Journals (Sweden)

Kyung Sup Kwak

2011-01-01

Full Text Available A Wireless Body Area Network (WBAN is a collection of low-power and lightweight wireless sensor nodes that are used to monitor the human body functions and the surrounding environment. It supports a number of innovative and interesting applications, including ubiquitous healthcare and Consumer Electronics (CE applications. Since WBAN nodes are used to collect sensitive (life-critical information and may operate in hostile environments, they require strict security mechanisms to prevent malicious interaction with the system. In this paper, we first highlight major security requirements and Denial of Service (DoS attacks in WBAN at Physical, Medium Access Control (MAC, Network, and Transport layers. Then we discuss the IEEE 802.15.4 security framework and identify the security vulnerabilities and major attacks in the context of WBAN. Different types of attacks on the Contention Access Period (CAP and Contention Free Period (CFP parts of the superframe are analyzed and discussed. It is observed that a smart attacker can successfully corrupt an increasing number of GTS slots in the CFP period and can considerably affect the Quality of Service (QoS in WBAN (since most of the data is carried in CFP period. As we increase the number of smart attackers the corrupted GTS slots are eventually increased, which prevents the legitimate nodes to utilize the bandwidth efficiently. This means that the direct adaptation of IEEE 802.15.4 security framework for WBAN is not totally secure for certain WBAN applications. New solutions are required to integrate high level security in WBAN.

A study of IEEE 802.15.4 security framework for wireless body area networks.

Science.gov (United States)

Saleem, Shahnaz; Ullah, Sana; Kwak, Kyung Sup

2011-01-01

A Wireless Body Area Network (WBAN) is a collection of low-power and lightweight wireless sensor nodes that are used to monitor the human body functions and the surrounding environment. It supports a number of innovative and interesting applications, including ubiquitous healthcare and Consumer Electronics (CE) applications. Since WBAN nodes are used to collect sensitive (life-critical) information and may operate in hostile environments, they require strict security mechanisms to prevent malicious interaction with the system. In this paper, we first highlight major security requirements and Denial of Service (DoS) attacks in WBAN at Physical, Medium Access Control (MAC), Network, and Transport layers. Then we discuss the IEEE 802.15.4 security framework and identify the security vulnerabilities and major attacks in the context of WBAN. Different types of attacks on the Contention Access Period (CAP) and Contention Free Period (CFP) parts of the superframe are analyzed and discussed. It is observed that a smart attacker can successfully corrupt an increasing number of GTS slots in the CFP period and can considerably affect the Quality of Service (QoS) in WBAN (since most of the data is carried in CFP period). As we increase the number of smart attackers the corrupted GTS slots are eventually increased, which prevents the legitimate nodes to utilize the bandwidth efficiently. This means that the direct adaptation of IEEE 802.15.4 security framework for WBAN is not totally secure for certain WBAN applications. New solutions are required to integrate high level security in WBAN.

MODELING OF ELECTRONIC GASOLINE INJECTION PROCESSES IN TWO STROKE ENGINE

Directory of Open Access Journals (Sweden)

Hraivoronskyi, Y.

2013-06-01

Full Text Available Basic provision of the processes developed mode, occurring in ignition fuel system with electronically controlled two stroke engine with positive ignition are given. Fuel injection process’ calculation results for the case of placing fuel injector into intake system presented.

The tree identify protocol of IEEE 1394 in uCRL

NARCIS (Netherlands)

C. Shankland; M.B. van der Zwaag

1998-01-01

textabstractWe specify the tree identify protocol of the IEEE 1394 high performance serial multimedia bus at three different levels of detail using $mu$CRL. We use the cones and foci verification technique of Groote and Springintveld to show that the descriptions are equivalent under branching

Project management for engineers

CERN Document Server

Bennett, Michael J

2014-01-01

Project Management for Engineers, as the title suggests, is a direct attempt at addressing the ever-increasing and specific needs for better project management of engineering students, practicing engineers and managers in the industry. It aims not only to present the principles and techniques of Project Management, but also to discuss project management standards, processes and requirements, such as PMBOK, IEEE and PRINCE. Each chapter begins with the basics of the theme being developed at a level understandable to an undergraduate, before more complex topics are introduced at the end of each section that are suitable for graduate students. For the practicing professionals or managers in the industry, the book also provides many real illustrations of practical application of the principles of Project Management. Through a realistic blend of theory and practical examples, as well as an integration of the engineering technical issues with business issues, this book seeks to remove the veil of mystery that has...

IEEE Std 649-1991: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1993-01-01

The basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations are described. In addition to defining specific qualification requirements for Class 1E motor control centers and their components in accordance with the more general qualification requirements of IEEE Std 323-1983, this standard is intended to provide guidance in establishing a qualification program for demonstrating the adequacy of Class 1E motor control centers in nuclear power generating station applications

Nuclear EQ sourcebook: A compilation of documents for nuclear equipment qualification

International Nuclear Information System (INIS)

Anon.

1992-01-01

In the nuclear power industry, environmental and seismic qualification of safety-related electrical and instrumentation equipment is collectively known as Equipment Qualification (EQ). Related technology, as well as regulatory requirements, have evolved rapidly during the last 15 years. For environmental qualification, what began in 1971 with one trial-use guide (IEEE Std 323-1971), now stands as a full complement of Nuclear Regulatory Commission (NRC) rules, guides and industry standards. In addition to the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME) has also undertaken development of its own set of standards for use in qualifying safety-related mechanical equipment. To ensure that the original design and qualification is preserved, engineers need to select and use the correct set of NRC regulations, regulatory guides, industry standards, and generic correspondence. Given that the total number of these documents exceed 200, this task becomes resource intensive. This compilation is the first known publication available to serve the user-community need for a complete and exhaustive single source. Approximately 180 items (Bulletins, Federal Rules, Generic Letters, Notices, Regulatory Guides, IEEE Standards, IEEE Recommended Practices, and IEEE Guides) have been processed separately for inclusion on the data base

IEEE 802.3 Fiber Optic Inter-Repeater Link

Science.gov (United States)

Tarrant, Peter J.

1987-01-01

This paper describes the implementation of a fiber optic inter-repeater link (FOIRL), used for connecting two remote copper segments of an IEEE 802.3 local area network. The rationale for the design, the signalling used and the collision detection mechanism is discussed. The evolution of the draft international standard for the FOIRL and the concurrence amongst various manufacturers is also presented. Finally some examples of typical applications, highlighting the ease of installation, are given.

ARC Researchers at IEEE 2015 Vehicle Power and Propulsion Conference

Science.gov (United States)

Contacts Researchers News & Events Event Calendar Annual Program Review Research Seminars Press Room Event Archives ARC Researchers at the IEEE 2015 Vehicle Power and Propulsion Conference (October 19-22 Ballroom B P-SS4-2 Comparison of SOFC and PEM Fuel Cell Hybrid Power Management Strategies for Mobile

Analysis and Enhancement of IEEE 802.15.4e DSME Beacon Scheduling Model

Directory of Open Access Journals (Sweden)

Kwang-il Hwang

2014-01-01

Full Text Available In order to construct a successful Internet of things (IoT, reliable network construction and maintenance in a sensor domain should be supported. However, IEEE 802.15.4, which is the most representative wireless standard for IoT, still has problems in constructing a large-scale sensor network, such as beacon collision. To overcome some problems in IEEE 802.15.4, the 15.4e task group proposed various different modes of operation. Particularly, the IEEE 802.15.4e deterministic and synchronous multichannel extension (DSME mode presents a novel scheduling model to solve beacon collision problems. However, the DSME model specified in the 15.4e draft does not present a concrete design model but a conceptual abstract model. Therefore, in this paper we introduce a DSME beacon scheduling model and present a concrete design model. Furthermore, validity and performance of DSME are evaluated through experiments. Based on experiment results, we analyze the problems and limitations of DSME, present solutions step by step, and finally propose an enhanced DSME beacon scheduling model. Through additional experiments, we prove the performance superiority of enhanced DSME.

Lyapunov-based constrained engine torque control using electronic throttle and variable cam timing

NARCIS (Netherlands)

Feru, E.; Lazar, M.; Gielen, R.H.; Kolmanovsky, I.V.; Di Cairano, S.

2012-01-01

In this paper, predictive control of a spark ignition engine equipped with an electronic throttle and a variable cam timing actuator is considered. The objective is to adjust the throttle angle and the engine cam timing in order to reduce the exhaust gas emissions while maintaining fast and

A Fast MAC-Layer Handover for an IEEE 802.16e-Based WMAN

Science.gov (United States)

Ray, Sayan K.; Pawlikowski, Krzysztof; Sirisena, Harsha

We propose a modification of the IEEE 802.16e hard handover (HHO) procedure, which significantly reduces the handover latency constraint of the original HHO procedure in IEEE 802.16e networks. It allows a better handling of the delay-sensitive traffic by avoiding unnecessary time-consuming scanning and synchronization activity as well as simplifies the network re-entry procedure. With the help of the backhaul network, it reduces the number of control messages in the original handover policy, making the handover latency acceptable also for real-time streaming traffic. Preliminary performance evaluation studies show that the modified handover procedure is able to reduce the total handover latency by about 50%.

The IEEE 1355 Standard. Developments, performance and application in high energy physics

International Nuclear Information System (INIS)

Haas, S.

1998-12-01

The data acquisition systems of the next generation High Energy Physics experiments at the Large Hadron Collider (LHC) at CERN will rely on high-speed point-to-point links and switching networks for their higher level trigger and event building systems. This thesis provides a detailed evaluation of the DS-Link and switch technology, which is based on the IEEE 1355 standard for Heterogeneous Interconnect (HIC). The DS-Link is a bidirectional point-to-point serial interconnect, operating at speeds up to 200 MBaud. The objective of this thesis was to study the performance of the IEEE 1355 link and switch technology and to demonstrate that switching networks using this technology would scale to meet the requirements of the High Energy Physics applications

A PROPOSED NOVEL ARCHITECTURE OF EC CONTROL SYSTEM USING IEEE 802.11n NETWORK AT ITER-INDIA GYROTRON TEST FACILITY

Directory of Open Access Journals (Sweden)

Deepak Mandge

2017-06-01

Full Text Available IEEE 802.11 Wi-Fi networks are increasingly becoming popular for its use in industrial applications. With the availability of recent amendments to IEEE 802.11 series of standards, particularly IEEE 802.11n, the adoption of Wi-Fi networks for process automation is gaining more focus and importance. The installation of Wireless networks naturally provides reduction in cable and its maintenance related costs, provides increased flexibility and mobility to enhance performance of industrial control system. The IEEE 802.11n supports parameterization that can be set for particular industrial applications and hence it has addressed to the aspects of timeliness and criticality to some extent. This paper proposes the use of IEEE 802.11n network to interconnect field instruments with Siemens PLC controller in harsh EMI/EMC environment. An application example is shown where the alternate control system architecture is developed in which non-critical and non-safety signals are communicated over Wi-Fi. While, for critical and safety signals, traditional hardwired signals methods can be implemented.

Homeland Security Affairs Journal, Supplement - 2012: IEEE 2011 Conference on Technology for Homeland Security: Best Papers

OpenAIRE

2012-01-01

Homeland Security Affairs is the peer-reviewed online journal of the Naval Postgraduate School Center for Homeland Defense and Security (CHDS), providing a forum to propose and debate strategies, policies, and organizational arrangements to strengthen U.S. homeland security. The instructors, participants, alumni, and partners of CHDS represent the leading subject matter experts and practitioners in the field of homeland security. IEEE Supplement 2012. Supplement: IEEE 2011 Conference on Te...

FPGA implementation cost and performance evaluation of IEEE 802.11 protocol encryption security schemes

Science.gov (United States)

Sklavos, N.; Selimis, G.; Koufopavlou, O.

2005-01-01

The explosive growth of internet and consumer demand for mobility has fuelled the exponential growth of wireless communications and networks. Mobile users want access to services and information, from both internet and personal devices, from a range of locations without the use of a cable medium. IEEE 802.11 is one of the most widely used wireless standards of our days. The amount of access and mobility into wireless networks requires a security infrastructure that protects communication within that network. The security of this protocol is based on the wired equivalent privacy (WEP) scheme. Currently, all the IEEE 802.11 market products support WEP. But recently, the 802.11i working group introduced the advanced encryption standard (AES), as the security scheme for the future IEEE 802.11 applications. In this paper, the hardware integrations of WEP and AES are studied. A field programmable gate array (FPGA) device has been used as the hardware implementation platform, for a fair comparison between the two security schemes. Measurements for the FPGA implementation cost, operating frequency, power consumption and performance are given.

Performance Evaluation of Beacon-Enabled Mode for IEEE 802.15.4 Wireless Sensor Network

Directory of Open Access Journals (Sweden)

M. Udin Harun Al Rasyid

2013-12-01

Full Text Available IEEE 802.15.5 standard support structure of star and peer-to-peer network formation. Strating from these, the cluster tree network can be built as a special case of peer-to-peer network to increse coverage area. In this paper, we provide an performance evaluation of beacon- enabled mode for IEEE 802.15.4 wireless sensor network on star and cluster topology in order to get the maximum result to apply the appropriate topology model as needed. We conduct analysis on each topology model by using the numbers of nodes from 10 nodes to 100 nodes to analyze throughput, delay, energy consumption, and probability success packet by using NS2 simulator. The simulation results show that the throughput and the probability of success packet of cluster topology are higher than that of star topology, and the energy consumption of cluster topology is lesser than that of star topology. However, cluster topology increases the delay more than star topology. Keywords: IEEE 802.15.4, wireless sensor network, beacon-enabled mode, topology, csma/ca

FPGA implementation cost and performance evaluation of IEEE 802.11 protocol encryption security schemes

International Nuclear Information System (INIS)

Sklavos, N; Selimis, G; Koufopavlou, O

2005-01-01

The explosive growth of internet and consumer demand for mobility has fuelled the exponential growth of wireless communications and networks. Mobile users want access to services and information, from both internet and personal devices, from a range of locations without the use of a cable medium. IEEE 802.11 is one of the most widely used wireless standards of our days. The amount of access and mobility into wireless networks requires a security infrastructure that protects communication within that network. The security of this protocol is based on the wired equivalent privacy (WEP) scheme. Currently, all the IEEE 802.11 market products support WEP. But recently, the 802.11i working group introduced the advanced encryption standard (AES), as the security scheme for the future IEEE 802.11 applications. In this paper, the hardware integrations of WEP and AES are studied. A field programmable gate array (FPGA) device has been used as the hardware implementation platform, for a fair comparison between the two security schemes. Measurements for the FPGA implementation cost, operating frequency, power consumption and performance are given

Validation of IEEE P1547.1 Interconnection Test Procedures: ASCO 7000 Soft Load Transfer System

Energy Technology Data Exchange (ETDEWEB)

Kroposki, B.; Englebretson, S.; Pink, C.; Daley, J.; Siciliano, R.; Hinton, D.

2003-09-01

This report presents the preliminary results of testing the ASCO 7000 Soft Load Transfer System according to IEEE P1547.1 procedures. The ASCO system interconnects synchronous generators with the electric power system and provides monitoring and control for the generator and grid connection through extensive protective functions. The purpose of this testing is to evaluate and give feedback on the contents of IEEE Draft Standard P1547.1 Conformance Tests Procedures for Equipment Interconnecting Distributed Resources With Electric Power Systems.

Validation of a zero-dimensional model for prediction of NOx and engine performance for electronically controlled marine two-stroke diesel engines

DEFF Research Database (Denmark)

Scappin, Fabio; Stefansson, Sigurður H.; Haglind, Fredrik

2012-01-01

The aim of this paper is to derive a methodology suitable for energy system analysis for predicting the performance and NOx emissions of marine low speed diesel engines. The paper describes a zero-dimensional model, evaluating the engine performance by means of an energy balance and a two zone...... experimental data from two MAN B&W engines; one case being data subject to engine parameter changes corresponding to simulating an electronically controlled engine; the second case providing data covering almost all model input and output parameters. The first case of validation suggests that the model can...

The Future of Electronic Power Processing and Conversion: Highlights from FEPPCON IX

DEFF Research Database (Denmark)

Enslin, Johan H.; Blaabjerg, Frede; Tan, Don F.D.

2017-01-01

Since 1991, every second year the IEEE Power Electronics Society (PELS) has organized the technical long-range planning meeting "Future of Electronic Power Processing and Conversion" (FEPPCON). FEPPCON IX was held 12-16 June 2017 in beautiful Kruger Park in South Africa (Figure 1). The overall go...

Enhanced identification of eligibility for depression research using an electronic medical record search engine.

Science.gov (United States)

Seyfried, Lisa; Hanauer, David A; Nease, Donald; Albeiruti, Rashad; Kavanagh, Janet; Kales, Helen C

2009-12-01

Electronic medical records (EMRs) have become part of daily practice for many physicians. Attempts have been made to apply electronic search engine technology to speed EMR review. This was a prospective, observational study to compare the speed and clinical accuracy of a medical record search engine vs. manual review of the EMR. Three raters reviewed 49 cases in the EMR to screen for eligibility in a depression study using the electronic medical record search engine (EMERSE). One week later raters received a scrambled set of the same patients including 9 distractor cases, and used manual EMR review to determine eligibility. For both methods, accuracy was assessed for the original 49 cases by comparison with a gold standard rater. Use of EMERSE resulted in considerable time savings; chart reviews using EMERSE were significantly faster than traditional manual review (p=0.03). The percent agreement of raters with the gold standard (e.g. concurrent validity) using either EMERSE or manual review was not significantly different. Using a search engine optimized for finding clinical information in the free-text sections of the EMR can provide significant time savings while preserving clinical accuracy. The major power of this search engine is not from a more advanced and sophisticated search algorithm, but rather from a user interface designed explicitly to help users search the entire medical record in a way that protects health information.

Guide to the collection and presentation of electrical, electronic, and sensing component reliability data for nuclear-power generating stations

International Nuclear Information System (INIS)

Anon.

1979-01-01

This Guide is intended to establish a method of collecting and presenting reliability data for quantitative systematic reliability analysis in nuclear power generating stations, as outlined in IEEE Std 351-1975. Appendix D, which is not a part of IEEE Std 500-1977 but which comprises the bulk of this publication, presents tables of reliability data for nuclear power generating stations, intended for use of nuclear systems reliability analysts or design engineers

Basic Research in Electronics (JSEP) Joint Services Electronics Program.

Science.gov (United States)

1987-12-31

34 IEEE J. Quantum Electronics, vol. 2E-22, pp. 544-551, April 1986. 41. T. Tamir and F.Y. Kou, "Classification of leaky waves supported by multilayered...34Photoemisslon from Single Electrodynamically Levitated Microparticles," Rev. Sci. Inst. §. 1088 (1985). 7. K.M. Leung, "P-Polarized Nonlinear...for a Single Electrodynamically Levitated Micropartcle," Rev. Sci. Inst., §L 2250 (1986). 10. S. Arnold, K.M. Leung and A.B. Pluchino, "The Optical

An IEEE 802.11 EDCA Model with Support for Analysing Networks with Misbehaving Nodes

Directory of Open Access Journals (Sweden)

Szott Szymon

2010-01-01

Full Text Available We present a novel model of IEEE 802.11 EDCA with support for analysing networks with misbehaving nodes. In particular, we consider backoff misbehaviour. Firstly, we verify the model by extensive simulation analysis and by comparing it to three other IEEE 802.11 models. The results show that our model behaves satisfactorily and outperforms other widely acknowledged models. Secondly, a comparison with simulation results in several scenarios with misbehaving nodes proves that our model performs correctly for these scenarios. The proposed model can, therefore, be considered as an original contribution to the area of EDCA models and backoff misbehaviour.

European Power Electronic conference in Aalborg, Denmark - 1000 participants discussing the future energy technologies

DEFF Research Database (Denmark)

Blaabjerg, Frede; Munk-Nielsen, Stig

2007-01-01

The European Power Electronics and Adjustable Speed Drives conference with technical sponsorship of IEEE Industrial Electronic Society has been held in Aalborg, Denmark, during the first days of September 2007 with an overwhelming success and participation. It was hosted by Aalborg University's I...

Simultaneous transmission of the IEEE 802.11 radio signal and optical Gbit Ethernet over the multimode fiber link

Science.gov (United States)

Maksymiuk, L.; Podziewski, A.

2015-09-01

In the paper we present a successful joint transmission of the IEEE 802.11 signal and an optical Gbit Ethernet over a multimode fiber based link. Most importantly, the multiplexation of both signals was performed in the optical domain. Due to the utilization of the multimode fiber the OBI noise was avoided and both channels were able to operate at the same wavelength. We prove that potential RoF link for IEEE 802.11 signal distribution may be used to additionally transmit other signals as Gbit Ethernet and therefore utilize the fiber infrastructure installed more effectively. The qualities of both the IEEE 802.11 and Ethernet transmissions fulfilled the requirements imposed by appropriate standards.

Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function

Science.gov (United States)

Feiner, Ron; Engel, Leeya; Fleischer, Sharon; Malki, Maayan; Gal, Idan; Shapira, Assaf; Shacham-Diamand, Yosi; Dvir, Tal

2016-06-01

In cardiac tissue engineering approaches to treat myocardial infarction, cardiac cells are seeded within three-dimensional porous scaffolds to create functional cardiac patches. However, current cardiac patches do not allow for online monitoring and reporting of engineered-tissue performance, and do not interfere to deliver signals for patch activation or to enable its integration with the host. Here, we report an engineered cardiac patch that integrates cardiac cells with flexible, freestanding electronics and a 3D nanocomposite scaffold. The patch exhibited robust electronic properties, enabling the recording of cellular electrical activities and the on-demand provision of electrical stimulation for synchronizing cell contraction. We also show that electroactive polymers containing biological factors can be deposited on designated electrodes to release drugs in the patch microenvironment on demand. We expect that the integration of complex electronics within cardiac patches will eventually provide therapeutic control and regulation of cardiac function.

Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function

Science.gov (United States)

Feiner, Ron; Engel, Leeya; Fleischer, Sharon; Malki, Maayan; Gal, Idan; Shapira, Assaf; Shacham-Diamand, Yosi; Dvir, Tal

2016-01-01

In cardiac tissue engineering approaches to treat myocardial infarction, cardiac cells are seeded within three-dimensional porous scaffolds to create functional cardiac patches. However, current cardiac patches do not allow for online monitoring and reporting of engineered-tissue performance, and do not interfere to deliver signals for patch activation or to enable its integration with the host. Here, we report an engineered cardiac patch that integrates cardiac cells with flexible, free-standing electronics and a 3D nanocomposite scaffold. The patch exhibited robust electronic properties, enabling the recording of cellular electrical activities and the on-demand provision of electrical stimulation for synchronizing cell contraction. We also show that electroactive polymers containing biological factors can be deposited on designated electrodes to release drugs in the patch microenvironment on-demand. We expect that the integration of complex electronics within cardiac patches will eventually provide therapeutic control and regulation of cardiac function. PMID:26974408

Engineers’ Responsibilities for Global Electronic Waste: Exploring Engineering Student Writing Through a Care Ethics Lens

Science.gov (United States)

Campbell, Ryan C.; Wilson, Denise

2016-01-01

This paper provides an empirically informed perspective on the notion of responsibility using an ethical framework that has received little attention in the engineering-related literature to date: ethics of care. In this work, we ground conceptual explorations of engineering responsibility in empirical findings from engineering student’s writing on the human health and environmental impacts of “backyard” electronic waste recycling/disposal. Our findings, from a purposefully diverse sample of engineering students in an introductory electrical engineering course, indicate that most of these engineers of tomorrow associated engineers with responsibility for the electronic waste (e-waste) problem in some way. However, a number of responses suggested attempts to deflect responsibility away from engineers towards, for example, the government or the companies for whom engineers work. Still other students associated both engineers and non-engineers with responsibility, demonstrating the distributed/collective nature of responsibility that will be required to achieve a solution to the global problem of excessive e-waste. Building upon one element of a framework for care ethics adopted from the wider literature, these empirical findings are used to facilitate a preliminary, conceptual exploration of care-ethical responsibility within the context of engineering and e-waste recycling/disposal. The objective of this exploration is to provide a first step toward understanding how care-ethical responsibility applies to engineering. We also hope to seed dialogue within the engineering community about its ethical responsibilities on the issue. We conclude the paper with a discussion of its implications for engineering education and engineering ethics that suggests changes for educational policy and the practice of engineering. PMID:27368195

Implementation of IEEE-1588 timing and synchronization for ATCA control and data acquisition systems

International Nuclear Information System (INIS)

Correia, Miguel; Sousa, Jorge; Combo, Álvaro; Rodrigues, António P.; Carvalho, Bernardo B.; Batista, António J.N.; Gonçalves, Bruno; Correia, Carlos M.B.A.; Varandas, Carlos A.F.

2012-01-01

Highlights: ► IEEE-1588 over Ethernet protocol is implemented for the synchronization of all clock signals of an ATCA AMC carrier module. ► The ATCA hardware consists of an AMC quad-carrier main-board with PCI Express switching. ► IEEE-1588 is to be implemented on a Virtex-6 FPGA. ► Timing signals on the ATX-AMC4-PTP are managed and routed by a crosspoint-switch implemented on a Virtex-6 FPGA. ► Each clock signal source may be independently located (on each of the AMC cards, RTM or ATCA backplane). - Abstract: Control and data acquisition (C and DA) systems for Fusion experiments are required to provide accurate timing and synchronization (T and S) signals to all of its components. IPFN adopted PICMG's Advanced Telecommunications Computing Architecture (ATCA) industry standard to develop C and DA instrumentation. ATCA was chosen not only for its high throughput characteristics but also for its high availability (HA) features which become of greater importance in steady-state operation scenarios. However, the specified ATCA clock and synchronization interface may be too limited for the timing and synchronization needs in advanced Physics experiments. Upcoming specification extensions, developed by the “xTCA for Physics” workgroups, will contemplate, among others, a complementary timing specification, developed by the PICMG xTCA for Physics IO, Timing and Synchronization Technical Committee. The IEEE-1588 Precision Time Protocol (PTP) over Ethernet is one of the protocols, proposed by the Committee, aiming for precise synchronization of clocks in measurement and control systems, based on low jitter and slave-to-slave skew criteria. The paper presents an implementation of IEEE-1588 over Ethernet, in an ATCA hardware platform. The ATCA hardware consists of an Advanced Mezzanine Card (AMC) quad-carrier front board with PCI Express switching. IEEE-1588 is to be implemented on a Virtex-6 FPGA. Ethernet connectivity with the remote master clock is located on

Comparison of IEEE383-2003 and IEC60505-2004 standards for harmonization of environmental qualification procedure of electric cable

International Nuclear Information System (INIS)

Kim, Jong Seog; Jeong, Sun Chul; Park, Kyung Heum; Jang, Kyung Nam

2010-01-01

Needs for harmonization of international equipment qualification(EQ) standards have been raised several years due to purchasing problem of nuclear equipment supplied from abroad country. To meet the regulatory requirement of domestic nuclear power plant, manufacturers have to qualify their equipment in accordance with each standard such as IEEE, IEC and RCC-E. Double qualification increase the equipment cost, which result in high construction cost. Even the unification of each standard have been discussed several years, we have got the long way to go yet. Comparison and harmonization of each international standard will give help to purchase the equipment qualified by not endorsed standard. Environmental qualification, seismic qualification and EMI/EMC qualification are major targets for harmonization. Since concern about cable qualification of 60 years life has been raised recently, harmonization of cable qualification standard also needs to be discussed. KEPRI launched a project for harmonization of EQ relative standards such as IEEE, IEC and RCC-E. A study for harmonization of IEEE323 and IEC60780 is known in progress by IEEE committee. In this paper, harmonization of international standards for cable qualification will be discussed. IEEE383 standard is qualification standard for electric cable broadly used in Asian pacific area while IEC60505 is mostly used in European area. Since these two standards have different requirements for environmental qualification of cable, problem can be happened in the plant site when they purchase cable qualified by not endorsed standard. IEEE383-2003 and IEC60505-2004 is the latest version of each standard. Comparison results and recommendations for harmonization of these two standards are introduced herein

Spectrum-efficient multi-channel design for coexisting IEEE 802.15.4 networks: A stochastic geometry approach

KAUST Repository

Elsawy, Hesham

2014-07-01

For networks with random topologies (e.g., wireless ad-hoc and sensor networks) and dynamically varying channel gains, choosing the long term operating parameters that optimize the network performance metrics is very challenging. In this paper, we use stochastic geometry analysis to develop a novel framework to design spectrum-efficient multi-channel random wireless networks based on the IEEE 802.15.4 standard. The proposed framework maximizes both spatial and time domain frequency utilization under channel gain uncertainties to minimize the number of frequency channels required to accommodate a certain population of coexisting IEEE 802.15.4 networks. The performance metrics are the outage probability and the self admission failure probability. We relax the single channel assumption that has been used traditionally in the stochastic geometry analysis. We show that the intensity of the admitted networks does not increase linearly with the number of channels and the rate of increase of the intensity of the admitted networks decreases with the number of channels. By using graph theory, we obtain the minimum required number of channels to accommodate a certain intensity of coexisting networks under a self admission failure probability constraint. To this end, we design a superframe structure for the coexisting IEEE 802.15.4 networks and a method for time-domain interference alignment. © 2002-2012 IEEE.

Analysis Of Impact Of Various Parameters On BER Performance For IEEE 802.11b

Directory of Open Access Journals (Sweden)

Nilesh B. Kalani

2015-08-01

Full Text Available Abstract This paper discusses about IEEE 802.11b simulation model implemented using LabVIEW software and its analyses for impact on bit error rate BER for different parameters as channel type channel number data transmission rate and packet size. Audio file is being transmitted processed and analyzed using the model for various parameters. This paper gives analysis of BER verses ESN0 for various parameter like data rate packet size and communication channel for the IEEE 802.11b simulation model generated using LabVIEW. It is proved that BER can be optimized by tweaking different parameters of wireless communication system.

Diseño y verificación de un amplificador para IEEE802.16

OpenAIRE

Lloret Arjona, Patricia

2005-01-01

Hace más de 6 años se empezó a gestar el IEEE802.16, un estándar para una nueva tecnología inalámbrica de banda ancha. El primer capítulo consiste en una introducción sobre este estándar, su evolución, las diferentes versiones que han ido apareciendo y las características principales de cada una de ellas, seguido de un pequeño comentario sobre su faceta comercial, WiMAX. El IEEE802.16 está empezando a tener relevancia, de modo que se decidió realizar un amplificador capaz de...

A Brief Study of Software Engineering Professional Continuing Education in DoD Acquisition

Science.gov (United States)

2010-04-01

Lifecycle Processes (IEEE 12207 ) (810) 37% 61% 2% Guide to the Software Engineering Body of K l d (SWEBOK) (804) 67% 31% 2% now e ge Software...Engineering-Software Measurement Process ( ISO /IEC 15939) (797) 55% 44% 2% Capability Maturity Model Integration (806) 17% 81% 2% Six Sigma Process...Improvement (804) 7% 91% 1% ISO 9000 Quality Management Systems (803) 10% 89% 1% 28 Conclusions Significant problem areas R i tequ remen s Management Very

interference effects of blue ence effects of bluetooth on wlan ence

African Journals Online (AJOL)

eobe

1DEPT. OF ELECTRICAL/ELECTRONIC E. 2, 3DEPARTMENT OF ... ENGINEERING, FEDERAL UNIV. .... The paper [9] dealt with the coexistence simulation of. IEEE 802.11b/g ... This research work employed software tools like. Netstumbler ...

Service differentiated and adaptive CSMA/CA over IEEE 802.15.4 for Cyber-Physical Systems.

Science.gov (United States)

Xia, Feng; Li, Jie; Hao, Ruonan; Kong, Xiangjie; Gao, Ruixia

2013-01-01

Cyber-Physical Systems (CPS) that collect, exchange, manage information, and coordinate actions are an integral part of the Smart Grid. In addition, Quality of Service (QoS) provisioning in CPS, especially in the wireless sensor/actuator networks, plays an essential role in Smart Grid applications. IEEE 802.15.4, which is one of the most widely used communication protocols in this area, still needs to be improved to meet multiple QoS requirements. This is because IEEE 802.15.4 slotted Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) employs static parameter configuration without supporting differentiated services and network self-adaptivity. To address this issue, this paper proposes a priority-based Service Differentiated and Adaptive CSMA/CA (SDA-CSMA/CA) algorithm to provide differentiated QoS for various Smart Grid applications as well as dynamically initialize backoff exponent according to traffic conditions. Simulation results demonstrate that the proposed SDA-CSMA/CA scheme significantly outperforms the IEEE 802.15.4 slotted CSMA/CA in terms of effective data rate, packet loss rate, and average delay.

Outdoor Long-Range WLANs : A Lesson for IEEE 802.11ah

NARCIS (Netherlands)

Aust, Stefan; Venkatesha Prasad, R.; Niemegeers, Ignas G M M

2015-01-01

Several service applications have been reported by many who proposed the use of wireless LANs (WLANs) over a wide variety of outdoor deployments. In particular, the upcoming IEEE 802.11ah WLAN protocol will enable a longer transmission range between WLAN access points (APs) and stations (STAs) up to

Metal particle emissions in the exhaust stream of diesel engines: an electron microscope study.

Science.gov (United States)

Liati, Anthi; Schreiber, Daniel; Dimopoulos Eggenschwiler, Panayotis; Arroyo Rojas Dasilva, Yadira

2013-12-17

Scanning electron microscopy and transmission electron microscopy were applied to investigate the morphology, mode of occurrence and chemical composition of metal particles (diesel ash) in the exhaust stream of a small truck outfitted with a typical after-treatment system (a diesel oxidation catalyst (DOC) and a downstream diesel particulate filter (DPF)). Ash consists of Ca-Zn-P-Mg-S-Na-Al-K-phases (lube-oil related), Fe, Cr, Ni, Sn, Pb, Sn (engine wear), and Pd (DOC coating). Soot agglomerates of variable sizes (1-5 μm, exceptionally 13 μm), rarely engine wear and escape into the atmosphere.

Performance Analysis of Non-saturated IEEE 802.11 DCF Networks

Science.gov (United States)

Zhai, Linbo; Zhang, Xiaomin; Xie, Gang

This letter presents a model with queueing theory to analyze the performance of non-saturated IEEE 802.11 DCF networks. We use the closed queueing network model and derive an approximate representation of throughput which can reveal the relationship between the throughput and the total offered load under finite traffic load conditions. The accuracy of the model is verified by extensive simulations.

IEEE Std 381-1977: IEEE standard criteria for type tests of Class 1E modules used in nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This document describes the basic requirements of a type test program with the objective of verifying that a module used as Class 1E equipment in a nuclear power generating station meets or exceeds its design specifications. This document is limited to class 1E modules from and including the sensor through the logic circuitry of the final actuation devices. Except for those that are part of a module, switchgear, cables, connections, motors, valve actuators, station batteries, and penetrations are not included and are covered by other IEEE documents. The purpose of this document is to supplement the procedures and requirements given in IEEE Std 323-1974 [24] for type testing Class 1E modules, thereby providing directions for establishment of a type test program which will obtain the required test data and yield the required documentation of test methods and results. This standard is structured to present to the user the principal performance characteristics and environmental parameters which must be considered in designing a type test program for any give Class 1E module. These modules range from tiny sensors to complete racks or cabinets full of equipment that may be located inside or outside containment. The Class 1E modules are required to perform their function before, during, or after, or all, any design basis event specified for the module. The vast variety of modules covered by this document precludes the listing here of specific requirements for each type test

IEEE 8023 ethernet, current status and future prospects at the LHC

CERN Document Server

Dobinson, Robert W; Haas, S; Martin, B; Le Vine, M J; Saka, F

2000-01-01

The status of the IEEE 802.3 standard is reviewed and prospects for the future, including the new 10 Gigabit version of Ethernet, are discussed. The relevance of Ethernet for experiments at the CERN Large Hadron Collider is considered, with emphasis on on-line applications and areas which are technically challenging. 8 Refs.

Integration of IEEE 1451 and HL7 exchanging information for patients' sensor data.

Science.gov (United States)

Kim, Wooshik; Lim, Suyoung; Ahn, Jinsoo; Nah, Jiyoung; Kim, Namhyun

2010-12-01

HL7 (Health Level 7) is a standard developed for exchanging incompatible healthcare information generated from programs or devices among heterogenous medical information systems. At present, HL7 is growing as a global standard. However, the HL7 standard does not support effective methods for treating data from various medical sensors, especially from mobile sensors. As ubiquitous systems are growing, HL7 must communicate with various medical transducers. In the area of sensor fields, IEEE 1451 is a group of standards for controlling transducers and for communicating data from/to various transducers. In this paper, we present the possibility of interoperability between the two standards, i.e., HL7 and IEEE 1451. After we present a method to integrate them and show the preliminary results of this approach.

A Cross-Layer Key Management Scheme for MIPv6 Fast Handover over IEEE 802.11 Wireless LAN

Directory of Open Access Journals (Sweden)

Chang-Seop Park

2015-01-01

Full Text Available A new key management and security scheme is proposed to integrate Layer Two (L2 and Layer Three (L3 keys for secure and fast Mobile IPv6 handover over IEEE 802.11 Wireless Local Area Network (WLAN. Unlike the original IEEE 802.11-based Mobile IPv6 Fast Handover (FMIPv6 that requires time-consuming IEEE 802.1x-based Extensible Authentication Protocol (EAP authentication on each L3 handover, the newly proposed key management and security scheme requires only one 802.1x-EAP regardless of how many L3 handovers occur. Therefore, the proposed scheme reduces the handover latency that results from a lengthy 802.1x-based EAP. The proposed key management and security scheme is extensively analyzed in terms of security and performance, and the proposed security scheme is shown to be more secure than those that were previously proposed.

Basic security measures for IEEE 802.11 wireless networks

OpenAIRE

Sarmiento, Oscar P.; Guerrero, Fabio G.; Rey Argote, David

2008-01-01

This article presents a tutorial/discussion of three commonly-used IEEE 802.11 wireless network security standards: WEP, WPA and WPA2. A detailed analysis of the RC4 algorithm supporting WEP is presented, including its vulnerabilities. The WPA and WPA2 encryption protocols’ most relevant aspects and technical characteristics are reviewed for a comparative analysis of the three standards in terms of the security they provide. Special attention has been paid to WEP encryption by using an educat...

A Novel Prioritization Scheme to Improve QoS in IEEE 802.11e Networks

Directory of Open Access Journals (Sweden)

Navid Tadayon

2010-01-01

Full Text Available IEEE 802.11 WLAN utilizes a distributed function at its MAC layer, namely, DCF to access the wireless medium. Due to its distributed nature, DCF is able to guarantee working stability in a wireless medium while maintaining the assembling and maintenance cost in a low level. However, DCF is inefficient in dealing with real-time traffics due to its incapability on providing QoS. IEEE 802.11e was introduced as a supplementary standard to cope with this problem. This standard introduces an Enhanced Distributed Coordination Function (EDCF that works based on diff-Serve model and can serve multiple classes of traffics (by using different prioritizations schemes. With the emergence of new time-sensitive applications, EDCF has proved to be yet inefficient in dealing with these kinds of traffics because it could not provide network with well-differentiated QoS. In this study, we propose a novel prioritization scheme to improve QoS level in IEEE 802.11e network. In this scheme, we replace Uniform PDF with Gamma PDF, which has salient differentiating properties. We investigate the suitability and superiority of this scheme on furnishing network with well-differentiated QoS using probabilistic analysis. We strengthen our claims by extensive simulation runs.

Backup control airstart performance on a digital electronic engine control-equipped F100-engine

Science.gov (United States)

Johnson, J. B.

1984-01-01

The air start capability of a backup control (BUC) was tested for a digital electronic engine control (DEEC) equipped F100 engine, which was installed in an F-15 aircraft. Two air start schedules were tested. Using the group 1 start schedule, based on a 40 sec timer, an air speed of 300 knots was required to ensure successful 40 and 25% BUC mode spooldown airstarts. If core rotor speed (N2) was less than 40% a stall would occur when the start bleed closed, 40 sec after initiation of the air start. All jet fuel starter (JFS) assisted air starts were successful with the group 1 start schedule. For the group 2 schedule, the time between pressurization and start bleed closure ranged between 50 sec and 72 sec. Idle rps was lower than the desired 65% for air starts at higher altitudes and lower air speeds.

IEEE C37.98-1987: IEEE standard seismic testing of relays

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard specifies the procedures to be used in the seismic testing of relays used in power system facilities. The standard is concerned with the determination of the seismic fragility level of relays and also gives recommendations for proof testing. The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are (1) the electrical settings and inputs to the relay, and other information to define its conditions during the test; (2) the change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure; (3) the seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case

IEEE C37.98-1978: IEEE standard seismic testing of relays

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard specifies the procedures to be used in the seismic testing of relays used in power system facilities. The standard is concerned with the determination of the seismic fragility level of relays and also gives recommendations for proof testing. The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in ANSI/IEEE Std 344-1975, Recommended Practices for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations. In order to define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general they are: (1) the electrical settings and inputs to the relay, and other information to define its conditions during the test; (2) the change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay which constitutes failure; (3) the seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new case

2011 IEEE Visualization Contest Winner: Visualizing Unsteady Vortical Behavior of a Centrifugal Pump

KAUST Repository

Otto, Mathias; Kuhn, Alexander; Engelke, Wito; Theisel, Holger

2012-01-01

In the 2011 IEEE Visualization Contest, the dataset represented a high-resolution simulation of a centrifugal pump operating below optimal speed. The goal was to find suitable visualization techniques to identify regions of rotating stall

17th IEEE NPSS Real Time Conference – RT-2010

CERN Multimedia

Carlos Varandas

2010-01-01

Congress Centre of “Instituto Superior Técnico”, Lisboa, Portugal, 24-28 May, 2010 ABSTRACT SUBMISSION OPEN Abstract Submission Deadline: March 1st, 2010 Dear Sir/Madam, We are pleased to announce that abstract submission for the 17th IEEE NPSS Real Time Conference is now open on our web site. The deadline for submitting an abstract is 1st March 2010. Full conference details General Chairman

Implementation experiences of ISO/IEEE11073 standard applied to new use cases for e-health environments.

Science.gov (United States)

Martinez, I; Escayola, J; Martinez-Espronceda, M; Serrano, L; Trigo, J D; Led, S; Garcia, J

2009-01-01

Recent advances in biomedical engineering and continuous technological innovations in last decade are promoting new challenges, especially in e-Health environments. In this context, the medical devices interoperability is one of the interest fields wherein these improvements require a standard-based design in order to achieve homogeneous solutions. Furthermore, the spreading of wearable devices, oriented to the paradigm of patient environment and supported by wireless technologies as Bluetooth or ZigBee, is bringing new medical use cases based on Ambient Assisted Living, home monitoring of elderly, heart failure, chronic, under palliative care or patients who have undergone surgery, urgencies and emergencies, or even fitness auto-control and health follow-up. In this paper, several implementation experiences based on ISO/IEEE11073 standard are detailed. These evolved e-Health services can improve the quality of the patient's care, increase the user's interaction, and assure these e-Health applications to be fully compatible with global telemedicine systems.

Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function.

Science.gov (United States)

Feiner, Ron; Engel, Leeya; Fleischer, Sharon; Malki, Maayan; Gal, Idan; Shapira, Assaf; Shacham-Diamand, Yosi; Dvir, Tal

2016-06-01

In cardiac tissue engineering approaches to treat myocardial infarction, cardiac cells are seeded within three-dimensional porous scaffolds to create functional cardiac patches. However, current cardiac patches do not allow for online monitoring and reporting of engineered-tissue performance, and do not interfere to deliver signals for patch activation or to enable its integration with the host. Here, we report an engineered cardiac patch that integrates cardiac cells with flexible, freestanding electronics and a 3D nanocomposite scaffold. The patch exhibited robust electronic properties, enabling the recording of cellular electrical activities and the on-demand provision of electrical stimulation for synchronizing cell contraction. We also show that electroactive polymers containing biological factors can be deposited on designated electrodes to release drugs in the patch microenvironment on demand. We expect that the integration of complex electronics within cardiac patches will eventually provide therapeutic control and regulation of cardiac function.

Reducing acquisition risk through integrated systems of systems engineering

Science.gov (United States)

Gross, Andrew; Hobson, Brian; Bouwens, Christina

2016-05-01

In the fall of 2015, the Joint Staff J7 (JS J7) sponsored the Bold Quest (BQ) 15.2 event and conducted planning and coordination to combine this event into a joint event with the Army Warfighting Assessment (AWA) 16.1 sponsored by the U.S. Army. This multipurpose event combined a Joint/Coalition exercise (JS J7) with components of testing, training, and experimentation required by the Army. In support of Assistant Secretary of the Army for Acquisition, Logistics, and Technology (ASA(ALT)) System of Systems Engineering and Integration (SoSE&I), Always On-On Demand (AO-OD) used a system of systems (SoS) engineering approach to develop a live, virtual, constructive distributed environment (LVC-DE) to support risk mitigation utilizing this complex and challenging exercise environment for a system preparing to enter limited user test (LUT). AO-OD executed a requirements-based SoS engineering process starting with user needs and objectives from Army Integrated Air and Missile Defense (AIAMD), Patriot units, Coalition Intelligence, Surveillance and Reconnaissance (CISR), Focused End State 4 (FES4) Mission Command (MC) Interoperability with Unified Action Partners (UAP), and Mission Partner Environment (MPE) Integration and Training, Tactics and Procedures (TTP) assessment. The SoS engineering process decomposed the common operational, analytical, and technical requirements, while utilizing the Institute of Electrical and Electronics Engineers (IEEE) Distributed Simulation Engineering and Execution Process (DSEEP) to provide structured accountability for the integration and execution of the AO-OD LVC-DE. As a result of this process implementation, AO-OD successfully planned for, prepared, and executed a distributed simulation support environment that responsively satisfied user needs and objectives, demonstrating the viability of an LVC-DE environment to support multiple user objectives and support risk mitigation activities for systems in the acquisition process.

The evolution of IRRR nuclear standards from the single failure criterion and their impact on system design

International Nuclear Information System (INIS)

Clark, D.H.

1978-01-01

One of the first industry standards developed in the United States to meet regulatory agency criteria for the design and installation of nuclear power plant control and instrumentation systems was prepared by the Institute of Electrical and Electronics Engineers, Inc., abbreviated IEEE. This was IEEE Std. 279, first issued in 1968. It was subsequently revised and reissued as IEEE Std. 279-1971 ''IEEE Standard: Criteria for Protection Systems for Nuclear Power Generating Stations''. Not only has the implementation of this standard had a tremendous impact on nuclear power plant design in the United States, it has been the base document from which subsequent IEEE nuclear standards have been developed. Three major concepts which are addressed by IEEE 279, and which have had a major impact upon control and instrumentation systems in nuclear power plants are the following : 1) Single failure criterion. 2) Equipment qualification. 3) Channel independence. Each of these concepts has resulted in the development of subsequent IEEE Nuclear Standards. The impact of some of these on control and instrumentation systems are discussed. (author)

An improved IEEE 802.11 protocol for reliable data transmission in power distribution fault diagnosis

Energy Technology Data Exchange (ETDEWEB)

Campoccia, F.; Di Silvestre, M.L.; Sanseverino, E.R.; Zizzo, G. [Palermo Univ., Palermo (Italy)

2010-10-15

In power systems, on-line transmission between local units and the central unit can be done by means of power line communications or wireless technology. During an electrical fault, the reliability of the distribution system depends on the security of the timely protective and restorative actions on the network. This paper focused on the WiFi system because of its economy and ease of installation. However, WiFi systems are typically managed by the IEEE 802.11 protocol, which is not reliable in terms of security in data communication. In WiFi networks, data is divided into packets and sent in succession to reduce errors within the radio channel. The IEEE 802.11 protocol has high probability for loss of packets or delay in their transmission. In order to ensure the reliability of data transmission times between two terminal units connected by WiFi stations, a new protocol was derived by modifying the IEEE 802.11. The improvements of the new protocol were highlighted and its capability for the diagnostic service was verified. The modified protocol eliminates the danger of collisions between packets and optimizes the transmission time for sending information. 6 refs., 7 tabs., 8 figs.

Strategies for Optimal MAC Parameters Tuning in IEEE 802.15.6 Wearable Wireless Sensor Networks.

Science.gov (United States)

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2015-09-01

Wireless body area networks (WBAN) has penetrated immensely in revolutionizing the classical heath-care system. Recently, number of WBAN applications has emerged which introduce potential limits to existing solutions. In particular, IEEE 802.15.6 standard has provided great flexibility, provisions and capabilities to deal emerging applications. In this paper, we investigate the application-specific throughput analysis by fine-tuning the physical (PHY) and medium access control (MAC) parameters of the IEEE 802.15.6 standard. Based on PHY characterizations in narrow band, at the MAC layer, carrier sense multiple access collision avoidance (CSMA/CA) and scheduled access protocols are extensively analyzed. It is concluded that, IEEE 802.15.6 standard can satisfy most of the WBANs applications throughput requirements by maximum achieving 680 Kbps. However, those emerging applications which require high quality audio or video transmissions, standard is not able to meet their constraints. Moreover, delay, energy efficiency and successful packet reception are considered as key performance metrics for comparing the MAC protocols. CSMA/CA protocol provides the best results to meet the delay constraints of medical and non-medical WBAN applications. Whereas, the scheduled access approach, performs very well both in energy efficiency and packet reception ratio.

A Multidisciplinary PBL Robot Control Project in Automation and Electronic Engineering

Science.gov (United States)

Hassan, Houcine; Domínguez, Carlos; Martínez, Juan-Miguel; Perles, Angel; Capella, Juan-Vicente; Albaladejo, José

2015-01-01

This paper presents a multidisciplinary problem-based learning (PBL) project consisting of the development of a robot arm prototype and the implementation of its control system. The project is carried out as part of Industrial Informatics (II), a compulsory third-year course in the Automation and Electronic Engineering (AEE) degree program at the…

A distributed scheme to manage the dynamic coexistence of IEEE 802.15.4-based health-monitoring WBANs.

Science.gov (United States)

Deylami, Mohammad N; Jovanov, Emil

2014-01-01

The overlap of transmission ranges between wireless networks as a result of mobility is referred to as dynamic coexistence. The interference caused by coexistence may significantly affect the performance of wireless body area networks (WBANs) where reliability is particularly critical for health monitoring applications. In this paper, we analytically study the effects of dynamic coexistence on the operation of IEEE 802.15.4-based health monitoring WBANs. The current IEEE 802.15.4 standard lacks mechanisms for effectively managing the coexistence of mobile WBANs. Considering the specific characteristics and requirements of health monitoring WBANs, we propose the dynamic coexistence management (DCM) mechanism to make IEEE 802.15.4-based WBANs able to detect and mitigate the harmful effects of coexistence. We assess the effectiveness of this scheme using extensive OPNET simulations. Our results indicate that DCM improves the successful transmission rates of dynamically coexisting WBANs by 20%-25% for typical medical monitoring applications.

BOB-RED queue management for IEEE 802.15.4 wireless sensor networks

Directory of Open Access Journals (Sweden)

Wu Jean-Lien

2011-01-01

Full Text Available Abstract Multimedia services over resource constrained wireless sensor networks (WSNs face a performance bottleneck issue from the gateway node to the sink node. Therefore, the queue management at the gateway node is crucial for diversified messages conveyed from the front nodes to the sink node. In this article, beacon order-based random early detection (BOB-RED queue management is proposed. BOB-RED is a dynamic adaptation scheme based on adjusting beacon interval and superframe duration in the IEEE 802.15.4 MAC superframe accompanied with RED queue management scheme to increase the transmission efficiency of multimedia over WSNs. We focus on the performance improvement upon different traffic loads over WSNs. Evaluation metrics include end-to-end delay, packet delivery ratio, and energy consumption in IEEE 802.15.4 beacon enabled mode. Simulation results show that BOB-RED can effectively decrease end-to-end delay and energy consumption compared to the DropTail scheme.

Implementation of Microelectronics Track in Electronics Engineering in a Philippines State University

Directory of Open Access Journals (Sweden)

Gil B. Barte

2015-11-01

Full Text Available The evolving trends in electronics continuous to attract students to take upElectronics Engineering.However, it also adds to discipline implementation complexities.Institutions of Higher Learning offering this program must adapt to this realities to avoid obsolescence. This paper looked at Batangas State University, in the Philippines,ongoingimplementation of the Microelectronics track under the Electronics Engineering (ECEProgram. It describes the restructuring done to the ECE curriculum to overcome the enormous complexity inherent in microelectronics design and the teaching pedagogy adopted to promote active learning. The ongoing program has produced encouraging outcomes:1students were able to design, and simulate complex gate CMOS circuits using EDA tools, in the four(4 course electives identified for the track; 2 the culture of independent learning among students improvement in students soft skills, communication skills, time-management and teamwork skill,; 3. useof free and web-based tools overcome the issue of high cost of license for EDA tools and seminar/training for continuous upgrading of faculty. Another encouraging outcome was the acceptance of the student-centered teaching approach used, Problem-Based Learning (PBL,in enhancing the students learning experience.

Hybrid Polling Method for Direct Link Communication for IEEE 802.11 Wireless LANs

Directory of Open Access Journals (Sweden)

Woo-Yong Choi

2008-10-01

Full Text Available The direct link communication between STAtions (STAs is one of the techniques to improve the MAC performance of IEEE 802.11 infrastructure networks. For the efficient direct link communication, in the literature, the simultaneous polling method was proposed to allow the multiple direct data communication to be performed simultaneously. However, the efficiency of the simultaneous polling method is affected by the interference condition. To alleviate the problem of the lower polling efficiency with the larger interference range, the hybrid polling method is proposed for the direct link communication between STAs in IEEE 802.11 infrastructure networks. By the proposed polling method, we can integrate the sequential and simultaneous polling methods properly according to the interference condition. Numerical examples are also presented to show the medium access control (MAC performance improvement by the proposed polling method.

Fuelling regulation with Electronic fuel injection for small spark ignition engine using Fuzzy Logic

International Nuclear Information System (INIS)

Shah, S.R.; Sahir, M.H.

2004-01-01

The use of Electronic Control systems in automotive applications gives the design engineer greater control over various processes compared with mechanical methods Examples of such electronic control systems are Electronic Fuel Injection (EFI), Traction Control Systems (TCS) and Anti-lock Braking Systems (ABS). In addition, the development of inexpensive and fast microcontrollers has remarkably improve, performance of passive and active safety systems of automobiles, without causing excessive increase in prices of vehicles -a favourable factor from the consumer's perspective. This paper deals with a possible electronic aid for the improvement of power control in a motorcycle. Controlling the speed and power of a motorcycle is difficult; especially on bumpy and uneven terrain. In this paper, the development of an EPI system is discussed, incorporating artificial intelligence to regulate the fuel supplied to the engine. It would minimize wheel slippage and jerky and sudden acceleration which potentially dangerous. It would also reduce production of large quantities of pollutant like hydrocarbons and carbon monoxide. Fuel consumption would also improve during stop-and-go traffic. (author)

IEEE Std 649-1980: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard describes the basic principles, requirements, and methods for qualifying Class 1E motor control centers for outside containment applications in nuclear power generating stations. Qualification of motor control centers located inside containment in a nuclear power generating station is beyond the scope of this standard. The purpose of this standard is (1) to define specific qualification requirements for Class 1E motor control centers in accordance with the more general qualification requirements of IEEE Std 323-1974, IEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations; (2) to provide guidance in establishing a qualification program for demonstrating the design adequacy of Class 1E motor control centers in nuclear power generating station applications

IEEE 802.11 ECG monitoring system.

Science.gov (United States)

Tejero-Calado, Juan; Lopez-Casado, Carmen; Bernal-Martin, Antonio; Lopez-Gomez, Miguel; Romero-Romero, Marco; Quesada, Guillermo; Lorca, Julio; Rivas, Ramon

2005-01-01

New wireless technologies make possible the implementation of high level integration wireless devices which allow the replacement of traditional large wired monitoring devices. This kind of devices favours at-home hospitalization, reducing the affluence to sanitary assistance centers to make routine controls. This fact causes a really favourable social impact, especially for elder people, rural-zone inhabitant, chronic patients and handicapped people. Furthermore, it offers new functionalities to physicians and will reduce the sanitary cost. Among these functionalities, biomedical signals can be sent to other devices (screen, PDA, PC...) or processing centers, without restricting the patients' mobility. The aim of this project is the development and implementation of a reduced size multi-channel electrocardiograph based on IEEE 802.11, which allows wireless monitoring of patients, and the insertion of the information into the TCP/IP Hospital network.

IEEE gathers nuclear part failure data via Delphi poll

International Nuclear Information System (INIS)

Anon.

1976-01-01

A description is given of a nuclear power plant component failure rate manual being prepared by the Institute of Electrical and Electronics Engineers. The manual will contain separate chapters on the following equipment categories: annunciator modules; batteries and chargers; blowers, circuit-breakers, interrupters, and relays; motors and generators; heaters; transformers; valve operators and actuators; instruments, controls, and sensors; and cables, raceways, joints, and terminations

Speed Control of General Purpose Engine with Electronic Governor

Science.gov (United States)

Sawut, Umerujan; Tohti, Gheyret; Takigawa, Buso; Tsuji, Teruo

This paper presents a general purpose engine speed control system with an electronic governor in order to improve the current system with a mechanical governor which shows unstable characteristics by change of mecanical friction or A/F ratio (Air/Fuel ratio). For the control system above, there are problems that the feedback signal is only a crank angle because of cost and the controlled object is a general purpose engine which is strongly nonlinear. In order to overcome these problems, the system model is shown for the dynamic estimation of the amount of air flow and the robust controller is designed. That is, the proposed system includes the robust sliding-mode controller by the feedback signal of only a crank angle where Genetic Algorithm is applied for the controller design. The simulation and the experiments by MATLAB/Simulink are performed to show the effectiveness of our proposal.

IEEE 802.3 Ethernet, Current Status and Future Prospects at the LHC

CERN Document Server

Dobinson, Robert W; Haas, S W; Martin, B; Le Vine, M J; Saka, F

2000-01-01

The status of the IEEE 802.3 standard is reviewed and prospects for the future, including the new 10 Gigabit version of Ethernet, are discussed. The relevance of Ethernet for experiments at the CERN Large Hadron Collider is considered, with emphasis on on-line applications and areas which are technically challenging.

Designing a Prototype LPG Injection Electronic Control Unit for a Carburetted Gasoline Engine

Directory of Open Access Journals (Sweden)

Barış ERKUŞ

2015-07-01

Full Text Available In this study, the originally carburetted gasoline engine was converted to gas-phase liquefied petroleum gas (LPG injection engine by using an after market LPG conversion kit's components except the electronic control unit (ECU. Instead of after market LPG injection ECU, the ECU which was designed considering the effects of  electromagnetic interference (EMI, was used for controlling injection. The designed ECU was tested in terms of EMI while the engine was being run and it was detected that the EMI noises could be suppressed as possible by taken measures. Designed ECU was used in performance tests at different engine conditions and the results obtained with LPG injection were compared with the results obtained with LPG carburetion. According to the performance test results, LPG injection ECU designed in this study could help to achieve low exhaust emissions and high engine performance.  

Practical experience with IEEE 1588 high precision time synchronization in electrical substation based on IEC 61850 process bus

Energy Technology Data Exchange (ETDEWEB)

Moore, R.; Goraj, M.J.; McGhee, J. [RuggedCom Inc., Concord, ON (Canada)

2010-07-01

This paper discussed a time synchronization and dynamic multicast filtering procedure conducted on an IEC 61850 process bus. The Institute of Electrical and Electronic (IEEE) 1588 time synchronization and dynamic multicast filtering procedure was conducted at a substation equipped with non-conventional instrument transformers (NCIT) and intelligent circuit breakers. The process bus interconnected IEDs within a bay that included a real time sampled value (SV) measurement system. The system was designed to reduce the use of copper wiring and to eliminate high energy signal processes. Digitized sampled measured values were sent from the electronic instrument transformers to protect and control relays. A merging unit was used to enable the transmission of the digitized current and voltage measurements across an ethernet network. Two sampling rates were supplied for power system monitoring and protection applications. The merging units continuously sent sampling values of current and voltages acquired from primary equipment. Precision time protocol systems were discussed, and issues related to time synchronization were reviewed. A network topology was provided. 4 refs., 4 figs.

Plastics disassembly versus bulk recycling: engineering design for end-of-life electronics resource recovery.

Science.gov (United States)

Rios, Pedro; Stuart, Julie Ann; Grant, Ed

2003-12-01

Annual plastic flows through the business and consumer electronics manufacturing supply chain include nearly 3 billion lb of high-value engineering plastics derived from petroleum. The recovery of resource value from this stream presents critical challenges in areas of materials identification and recycling process design that demand new green engineering technologies applied together with life cycle assessment and ecological supply chain analysis to create viable plastics-to-plastics supply cycles. The sustainable recovery of potentially high-value engineering plastics streams requires that recyclers either avoid mixing plastic parts or purify later by separating smaller plastic pieces created in volume reduction (shredding) steps. Identification and separation constitute significant barriers in the plastics-to-plastics recycling value proposition. In the present work, we develop a model that accepts randomly arriving electronic products to study scenarios by which a recycler might identify and separate high-value engineering plastics as well as metals. Using discrete eventsimulation,we compare current mixed plastics recovery with spectrochemical plastic resin identification and subsequent sorting. Our results show that limited disassembly with whole-part identification can produce substantial yields in separated streams of recovered engineering thermoplastics. We find that disassembly with identification does not constitute a bottleneck, but rather, with relatively few workers, can be configured to pull the process and thus decrease maximum staging space requirements.

An investigation of the performance of an electronic in-line pump system for diesel engines

Science.gov (United States)

Fan, Li-Yun; Zhu, Yuan-Xian; Long, Wu-Qiang; Ma, Xiu-Zhen; Xue, Ying-Ying

2008-12-01

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump (EIP) system, designed to meet China’s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.

A network architecture for precision formation flying using the IEEE 802.11 MAC Protocol

Science.gov (United States)

Clare, Loren P.; Gao, Jay L.; Jennings, Esther H.; Okino, Clayton

2005-01-01

Precision Formation Flying missions involve the tracking and maintenance of spacecraft in a desired geometric formation. The strong coupling of spacecraft in formation flying control requires inter-spacecraft communication to exchange information. In this paper, we present a network architecture that supports PFF control, from the initial random deployment phase to the final formation. We show that a suitable MAC layer for the application protocol is IEEE's 802.11 MAC protocol. IEEE 802.11 MAC has two modes of operations: DCF and PCF. We show that DCF is suitable for the initial deployment phase while switching to PCF when the spacecraft are in formation improves jitter and throughput. We also consider the effect of routing on protocol performance and suggest when it is profitable to turn off route discovery to achieve better network performance.

2011 IEEE Visualization Contest Winner: Visualizing Unsteady Vortical Behavior of a Centrifugal Pump

KAUST Repository

Otto, Mathias

2012-09-01

In the 2011 IEEE Visualization Contest, the dataset represented a high-resolution simulation of a centrifugal pump operating below optimal speed. The goal was to find suitable visualization techniques to identify regions of rotating stall that impede the pump\\'s effectiveness. The winning entry split analysis of the pump into three parts based on the pump\\'s functional behavior. It then applied local and integration-based methods to communicate the unsteady flow behavior in different regions of the dataset. This research formed the basis for a comparison of common vortex extractors and more recent methods. In particular, integration-based methods (separation measures, accumulated scalar fields, particle path lines, and advection textures) are well suited to capture the complex time-dependent flow behavior. This video (http://youtu.be/ oD7QuabY0oU) shows simulations of unsteady flow in a centrifugal pump. © 2012 IEEE.

A Novel IEEE 802.15.4e DSME MAC for Wireless Sensor Networks.

Science.gov (United States)

Sahoo, Prasan Kumar; Pattanaik, Sudhir Ranjan; Wu, Shih-Lin

2017-01-16

IEEE 802.15.4e standard proposes Deterministic and Synchronous Multichannel Extension (DSME) mode for wireless sensor networks (WSNs) to support industrial, commercial and health care applications. In this paper, a new channel access scheme and beacon scheduling schemes are designed for the IEEE 802.15.4e enabled WSNs in star topology to reduce the network discovery time and energy consumption. In addition, a new dynamic guaranteed retransmission slot allocation scheme is designed for devices with the failure Guaranteed Time Slot (GTS) transmission to reduce the retransmission delay. To evaluate our schemes, analytical models are designed to analyze the performance of WSNs in terms of reliability, delay, throughput and energy consumption. Our schemes are validated with simulation and analytical results and are observed that simulation results well match with the analytical one. The evaluated results of our designed schemes can improve the reliability, throughput, delay, and energy consumptions significantly.

Design Optimization of Cyber-Physical Distributed Systems using IEEE Time-sensitive Networks (TSN)

DEFF Research Database (Denmark)

Pop, Paul; Lander Raagaard, Michael; Craciunas, Silviu S.

2016-01-01

to the optimization of distributed cyber-physical systems using real-time Ethernet for communication. Then, we formulate two novel optimization problems related to the scheduling and routing of TT and AVB traffic in TSN. Thus, we consider that we know the topology of the network as well as the set of TT and AVB flows......In this paper we are interested in safety-critical real-time applications implemented on distributed architectures supporting the Time-SensitiveNetworking (TSN) standard. The ongoing standardization of TSN is an IEEE effort to bring deterministic real-time capabilities into the IEEE 802.1 Ethernet...... standard supporting safety-critical systems and guaranteed Quality-of-Service. TSN will support Time-Triggered (TT) communication based on schedule tables, Audio-Video-Bridging (AVB) flows with bounded end-to-end latency as well as Best-Effort messages. We first present a survey of research related...

Engineering in-plane silicon nanowire springs for highly stretchable electronics

Science.gov (United States)

Xue, Zhaoguo; Dong, Taige; Zhu, Zhimin; Zhao, Yaolong; Sun, Ying; Yu, Linwei

2018-01-01

Crystalline silicon (c-Si) is unambiguously the most important semiconductor that underpins the development of modern microelectronics and optoelectronics, though the rigid and brittle nature of bulk c-Si makes it difficult to implement directly for stretchable applications. Fortunately, the one-dimensional (1D) geometry, or the line-shape, of Si nanowire (SiNW) can be engineered into elastic springs, which indicates an exciting opportunity to fabricate highly stretchable 1D c-Si channels. The implementation of such line-shape-engineering strategy demands both a tiny diameter of the SiNWs, in order to accommodate the strains under large stretching, and a precise growth location, orientation and path control to facilitate device integration. In this review, we will first introduce the recent progresses of an in-plane self-assembly growth of SiNW springs, via a new in-plane solid-liquid-solid (IPSLS) mechanism, where mono-like but elastic SiNW springs are produced by surface-running metal droplets that absorb amorphous Si thin film as precursor. Then, the critical growth control and engineering parameters, the mechanical properties of the SiNW springs and the prospects of developing c-Si based stretchable electronics, will be addressed. This efficient line-shape-engineering strategy of SiNW springs, accomplished via a low temperature batch-manufacturing, holds a strong promise to extend the legend of modern Si technology into the emerging stretchable electronic applications, where the high carrier mobility, excellent stability and established doping and passivation controls of c-Si can be well inherited. Project supported by the National Basic Research 973 Program (No. 2014CB921101), the National Natural Science Foundation of China (No. 61674075), the National Key Research and Development Program of China (No. 2017YFA0205003), the Jiangsu Excellent Young Scholar Program (No. BK20160020), the Scientific and Technological Support Program in Jiangsu Province (No. BE

Teaching Sustainable Energy and Power Electronics to Engineering Students in a Laboratory Environment Using Industry-Standard Tools

Science.gov (United States)

Ochs, David S.; Miller, Ruth Douglas

2015-01-01

Power electronics and renewable energy are two important topics for today's power engineering students. In many cases, the two topics are inextricably intertwined. As the renewable energy sector grows, the need for engineers qualified to design such systems grows as well. In order to train such engineers, new courses are needed that highlight the…

Electronic whiteboards: review of the literature.

Science.gov (United States)

Randell, Rebecca; Greenhalgh, Joanne; Wyatt, Jeremy; Gardner, Peter; Pearman, Alan; Honey, Stephanie; Dowding, Dawn

2015-01-01

Electronic whiteboards are being introduced into hospitals to communicate real-time patient information instantly to staff. This paper provides a preliminary review of the current state of evidence for the effect of electronic whiteboards on care processes and patient outcomes. A literature search was performed for the dates 1996 to 2014 on MEDLINE, EMBASE, IEEE Xplore, Science Direct, and the ACM Digital Library. Thirteen papers, describing 11 studies, meeting the inclusion criteria were identified. The majority of studies took place in the Emergency Department. While studies looked at the impact of electronic whiteboards on the process of care, there is an absence of evidence concerning impact on patient outcomes. There is a need for robust research measuring the impact of electronic whiteboards on inpatient care.

DoS detection in IEEE 802.11 with the presence of hidden nodes

Directory of Open Access Journals (Sweden)

Joseph Soryal

2014-07-01

Full Text Available The paper presents a novel technique to detect Denial of Service (DoS attacks applied by misbehaving nodes in wireless networks with the presence of hidden nodes employing the widely used IEEE 802.11 Distributed Coordination Function (DCF protocols described in the IEEE standard [1]. Attacker nodes alter the IEEE 802.11 DCF firmware to illicitly capture the channel via elevating the probability of the average number of packets transmitted successfully using up the bandwidth share of the innocent nodes that follow the protocol standards. We obtained the theoretical network throughput by solving two-dimensional Markov Chain model as described by Bianchi [2], and Liu and Saadawi [3] to determine the channel capacity. We validated the results obtained via the theoretical computations with the results obtained by OPNET simulator [4] to define the baseline for the average attainable throughput in the channel under standard conditions where all nodes follow the standards. The main goal of the DoS attacker is to prevent the innocent nodes from accessing the channel and by capturing the channel’s bandwidth. In addition, the attacker strives to appear as an innocent node that follows the standards. The protocol resides in every node to enable each node to police other nodes in its immediate wireless coverage area. All innocent nodes are able to detect and identify the DoS attacker in its wireless coverage area. We applied the protocol to two Physical Layer technologies: Direct Sequence Spread Spectrum (DSSS and Frequency Hopping Spread Spectrum (FHSS and the results are presented to validate the algorithm.

DoS detection in IEEE 802.11 with the presence of hidden nodes.

Science.gov (United States)

Soryal, Joseph; Liu, Xijie; Saadawi, Tarek

2014-07-01

The paper presents a novel technique to detect Denial of Service (DoS) attacks applied by misbehaving nodes in wireless networks with the presence of hidden nodes employing the widely used IEEE 802.11 Distributed Coordination Function (DCF) protocols described in the IEEE standard [1]. Attacker nodes alter the IEEE 802.11 DCF firmware to illicitly capture the channel via elevating the probability of the average number of packets transmitted successfully using up the bandwidth share of the innocent nodes that follow the protocol standards. We obtained the theoretical network throughput by solving two-dimensional Markov Chain model as described by Bianchi [2], and Liu and Saadawi [3] to determine the channel capacity. We validated the results obtained via the theoretical computations with the results obtained by OPNET simulator [4] to define the baseline for the average attainable throughput in the channel under standard conditions where all nodes follow the standards. The main goal of the DoS attacker is to prevent the innocent nodes from accessing the channel and by capturing the channel's bandwidth. In addition, the attacker strives to appear as an innocent node that follows the standards. The protocol resides in every node to enable each node to police other nodes in its immediate wireless coverage area. All innocent nodes are able to detect and identify the DoS attacker in its wireless coverage area. We applied the protocol to two Physical Layer technologies: Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS) and the results are presented to validate the algorithm.

IEEE recommended practices for seismic qualification of Class 1E equipment for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1975-01-01

The IEEE has developed this document to provide direction for developing programs to seismically qualify Class 1E equipment for nuclear power generating stations. It supplements IEEE Std 323-1974, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, which describes the basic requirements for equipment qualification. The Class 1E equipment to be qualified by produres or standards established by this document are of many forms, characteristics, and materials; therefore, the document presents many acceptable methods with the intent of permitting the user to make a judicious selection from among the various options. In making such a selection, the user should choose those that best meet a particular equipment's requirements. Further, in using this document as a specification for the purchase of equipment, the many options should also be recognized and the document invoked accordingly. It is recommended that the need for specific standards for the seismic qualifiction of particular kinds of equipment be evaluated by those responsible for such documents and that consideration be given to the application of particular methods from these documents which are most suitable

Nanoscale Engineering in VO2 Nanowires via Direct Electron Writing Process.

Science.gov (United States)

Zhang, Zhenhua; Guo, Hua; Ding, Wenqiang; Zhang, Bin; Lu, Yue; Ke, Xiaoxing; Liu, Weiwei; Chen, Furong; Sui, Manling

2017-02-08

Controlling phase transition in functional materials at nanoscale is not only of broad scientific interest but also important for practical applications in the fields of renewable energy, information storage, transducer, sensor, and so forth. As a model functional material, vanadium dioxide (VO 2 ) has its metal-insulator transition (MIT) usually at a sharp temperature around 68 °C. Here, we report a focused electron beam can directly lower down the transition temperature of a nanoarea to room temperature without prepatterning the VO 2 . This novel process is called radiolysis-assisted MIT (R-MIT). The electron beam irradiation fabricates a unique gradual MIT zone to several times of the beam size in which the temperature-dependent phase transition is achieved in an extended temperature range. The gradual transformation zone offers to precisely control the ratio of metal/insulator phases. This direct electron writing technique can open up an opportunity to precisely engineer nanodomains of diversified electronic properties in functional material-based devices.

Energy-aware path selection metric for IEEE 802.11s wireless mesh networking

CSIR Research Space (South Africa)

Mhlanga, MM

2009-01-01

Full Text Available The IEEE 802.11s working group has commenced activities, which would lead to the development of a standard for wireless mesh networks (WMNs). The draft of 802.11s introduces a new path selection metric called airtime link metric. However...

Energy-aware path selection metric for IEEE 802.11s wireless mesh networking

CSIR Research Space (South Africa)

Mhlanga, MM

2009-08-01

Full Text Available The IEEE 802.11s working group has commenced activities, which would lead to the development of a standard for wireless mesh networks (WMNs). The draft of 802.11s introduces a new path selection metric called airtime link metric. However...

A 1-GHz charge pump PLL frequency synthesizer for IEEE 1394b PHY

DEFF Research Database (Denmark)

Ji, J.; Liu, H.; Li, Q.

2012-01-01

This paper presents an implementation of multi-rate SerDes transceiver for IEEE 1394b applications. Simple and effective pre-emphasis and equalizer circuits are used at transmitter and receiver, respectively. A phase interpolator based clock and data recovery circuit with optimized linearity is a...

Corrections to "Connectivity-Based Reliable Multicast MAC Protocol for IEEE 802.11 Wireless LANs"

Directory of Open Access Journals (Sweden)

Choi Woo-Yong

2010-01-01

Full Text Available We have found the errors in the throughput formulae presented in our paper "Connectivity-based reliable multicast MAC protocol for IEEE 802.11 wireless LANs". We provide the corrected formulae and numerical results.

Electronic digital computers their use in science and engineering

CERN Document Server

Alt, Franz L

1958-01-01

Electronic Digital Computers: Their Use in Science and Engineering describes the principles underlying computer design and operation. This book describes the various applications of computers, the stages involved in using them, and their limitations. The machine is composed of the hardware which is run by a program. This text describes the use of magnetic drum for storage of data and some computing. The functions and components of the computer include automatic control, memory, input of instructions by using punched cards, and output from resulting information. Computers operate by using numbe

Integrating Sustainability in a PBL Environment for Electronics Engineering

DEFF Research Database (Denmark)

Arsat, Mahyuddin; Holgaard, Jette Egelund; de Graaff, Erik

2013-01-01

(PBL) has been put forward as a promising pedagogical model and emerged as an opportunity to implement sustainability successfully. Due to the almost forty years of experience in PBL, a case study was carried out at Aalborg University, Denmark to excerpt their experience of integrating sustainability...... in a problem based learning environment. Three electronics engineering project modules were selected as example and empirically supported by constructed interviews with staff and document analysis of selected material. The findings were analysed with a systems approach and presented with reference to three...

IEEE Xplore® Digital Library - Evolving to Meet YOUR Changing Needs

OpenAIRE

2014-01-01

Представлена презентация доклада "Использование платформы IEEE Digital Library: уникальные научные публикации в области электроники, радиосвязи, вычислительной техники, информационных технологий, энергетики, машиностроения, физики, химии, геологии, нанотехнологий" Эстер Лукаш, специалиста по обучению IEEE (Германия), на семинаре «Использование платформы IEEE Digital Library», прошедшем 02 октября 2014 года в УрФУ, на английском языке....

Investigating the efficiency of IEEE 802.15.4 for medical monitoring applications.

Science.gov (United States)

Pelegris, P; Banitsas, K

2011-01-01

Recent advancements in wireless communications technologies bring us one step closer to provide reliable Telecare services as an alternative to patients staying in a hospital mainly for monitoring purposes. In this research we investigate the efficiency of IEEE 802.15.4 in a simple scenario where a patient is being monitored using an ECG and a blood analysis module. This approach binds well with assisted living solutions, by sharing the network infrastructure for both monitoring and control while taking advantage of the low power features of the protocol. Such applications are becoming more and more realistic to implement as IEEE 802.15.4 compatible hardware becomes increasingly available. Our aim is to examine the impact of Beacon and Superframe Order in the medium access delay, dropped packets, end to end delay, average retransmission attempts and consumed power focusing on this bandwidth demanding situation where the network load does not allow low duty cycles, in order to draw some conclusions on the effect that this will have to telemonitoring applications.

Dynamic subframe allocation for mobile broadband m-health using IEEE 802.16j mobile multihop relay networks.

Science.gov (United States)

Alinejad, Ali; Istepanian, R S H; Philip, N

2012-01-01

The concept of 4G health will be one of the key focus areas of future m-health research and enterprise activities in the coming years. WiMAX technology is one of the constituent 4G wireless technologies that provides broadband wireless access (BWA). Despite the fact that WiMAX is able to provide a high data rate in a relatively large coverage; this technology has specific limitations such as: coverage, signal attenuation problems due to shadowing or path loss, and limited available spectrum. The IEEE 802.16j mobile multihop relay (MMR) technology is a pragmatic solution designed to overcome these limitations. The aim of IEEE 802.16j MMR is to expand the IEEE 802.16e's capabilities with multihop features. In particular, the uplink (UL) and downlink (DL) subframe allocation in WiMAX network is usually fixed. However, dynamic frame allocation is a useful mechanism to optimize uplink and downlink subframe size dynamically based on the traffic conditions through real-time traffic monitoring. This particular mechanism is important for future WiMAX based m-health applications as it allows the tradeoff in both UL and DL channels. In this paper, we address the dynamic frame allocation issue in IEEE 802.16j MMR network for m-health applications. A comparative performance analysis of the proposed approach is validated using the OPNET Modeler(®). The simulation results have shown an improved performance of resource allocation and end-to-end delay performance for typical medical video streaming application.

Interoperability in digital electrocardiography: harmonization of ISO/IEEE x73-PHD and SCP-ECG.

Science.gov (United States)

Trigo, Jesús D; Chiarugi, Franco; Alesanco, Alvaro; Martínez-Espronceda, Miguel; Serrano, Luis; Chronaki, Catherine E; Escayola, Javier; Martínez, Ignacio; García, José

2010-11-01

The ISO/IEEE 11073 (x73) family of standards is a reference frame for medical device interoperability. A draft for an ECG device specialization (ISO/IEEE 11073-10406-d02) has already been presented to the Personal Health Device (PHD) Working Group, and the Standard Communications Protocol for Computer-Assisted ElectroCardioGraphy (SCP-ECG) Standard for short-term diagnostic ECGs (EN1064:2005+A1:2007) has recently been approved as part of the x73 family (ISO 11073-91064:2009). These factors suggest the coordinated use of these two standards in foreseeable telecardiology environments, and hence the need to harmonize them. Such harmonization is the subject of this paper. Thus, a mapping of the mandatory attributes defined in the second draft of the ISO/IEEE 11073-10406-d02 and the minimum SCP-ECG fields is presented, and various other capabilities of the SCP-ECG Standard (such as the messaging part) are also analyzed from an x73-PHD point of view. As a result, this paper addresses and analyzes the implications of some inconsistencies in the coordinated use of these two standards. Finally, a proof-of-concept implementation of the draft x73-PHD ECG device specialization is presented, along with the conversion from x73-PHD to SCP-ECG. This paper, therefore, provides recommendations for future implementations of telecardiology systems that are compliant with both x73-PHD and SCP-ECG.

Real-Time Support on IEEE 802.11 Wireless Ad-Hoc Networks: Reality vs. Theory

Science.gov (United States)

Kang, Mikyung; Kang, Dong-In; Suh, Jinwoo

The usable throughput of an IEEE 802.11 system for an application is much less than the raw bandwidth. Although 802.11b has a theoretical maximum of 11Mbps, more than half of the bandwidth is consumed by overhead leaving at most 5Mbps of usable bandwidth. Considering this characteristic, this paper proposes and analyzes a real-time distributed scheduling scheme based on the existing IEEE 802.11 wireless ad-hoc networks, using USC/ISI's Power Aware Sensing Tracking and Analysis (PASTA) hardware platform. We compared the distributed real-time scheduling scheme with the real-time polling scheme to meet deadline, and compared a measured real bandwidth with a theoretical result. The theoretical and experimental results show that the distributed scheduling scheme can guarantee real-time traffic and enhances the performance up to 74% compared with polling scheme.

0011-0030.IEEE 754: 64 Bit Double Precision FloatsThis.pdf | 01 ...

Indian Academy of Sciences (India)

Home; public; Volumes; reso; 021; 01; 0011-0030.IEEE 754: 64 Bit Double Precision FloatsThis.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 ...

ELECTRONIC CONTROL FOR FUEL SUPPLY OF DIESEL ENGINE ON THE BASIS OF PROGRAMMABLE PID-REGULATOR

Directory of Open Access Journals (Sweden)

A. G. Bakhanovich

2017-01-01

Full Text Available The article presents a schematic diagram of the Euro-3 diesel engine electronic control and describes hard- and software platform of the high pressure fuel pump pneumatic actuator control that allows to realize the concept of electronic fuel supply control of diesel engine KamAZ-740. The strategic dependence beetwen the angular position of fuel pump governor lever and the angular position of electronic accelerator pedal were put on the basis of electronic control concept. Implementation of this dependence was carried out by applying a modulated PWM signal with determined duty cycle by the controller to the coil proportional solenoid valve, which is responsible for the amount of air pressure in the working chamber of the power air cylinder, connected by articulated-type to the governor lever of the high pressure fuel pump. In this case, the feedback control by position of governor lever of the high pressure fuel pump was introduced in the control circuit, but engine crankshaft speed control was carried out using a software continuous PID governor. Developed strategy gives possibility to track the deflection  of control parameter from a predetermined value by real-time and almost instantly, to make a control action on actuators to eliminate this deflection, while providing a minimum time of transition. Governor’s setting (proportional, integral and differential component performed empirically using the classical Ziegler – Nichols method, based on the analysis of the safety factor of automatic control system. The results of calculating the coefficients of proportional integral-differential regulator and oscillograms HIL experiment on testing the proposed diesel engine throttle control strategies using visualization CoDeSys V2.3 are given in activity.

Revisión del estado del arte deIR-Ultra-Wideband y simulación de la respuesta impulsiva del canal IEEE802.15.4a Review of the state of art of IR-Ultra-Wideband and simulation of Impulse Responce of the IEEE 802.15.4a channel

Directory of Open Access Journals (Sweden)

Julio Suárez Páez

2010-06-01

Full Text Available Este artículo realiza una revisión del estado del arte de la tecnología basada en canales de Banda Ultra Ancha (UWB, Ultra–Wideband enfocándose en su regulación, estandarización, aplicaciones básicas, modelo de canal IEEE 802.15.4a y simulación de la respuesta impulsiva de este tipo de canal. También se pretende introducir al lector en las tecnologías basadas en canales IR–UWB y en los parámetros para el modelamiento y simulación del canal UWB IEEE 802.15.4a.This paper reviews the state of the art of the technology based in channels of Ultra Wide band (UWB Ultra–Wideband focusing on its regulation, standardization, basic applications, IEEE 802.15.4a channel model and simulation of the impulsive response of this type of channel. Also, it aims to introduce the reader to the technologies based on IR–UWB channels and the parameters for modeling and simulation of IEEE 802.15.4a UWB channel.

Employability of the Bachelor of Science in Electronics Engineering Graduates of Camarines Sur Polytechnic Colleges

Directory of Open Access Journals (Sweden)

Rizza T. Loquias

2015-11-01

Full Text Available The study determined the employment status of the graduates of BS Electronics Engineering from 1999 to 2011. It also addressed the relevance of the ECE program outcomes and school factors to their employability. Pertinent data were gathered using a questionnaire and the sample size of 180 was determined using Slovin’s formula. Findings revealed that the graduates are highly employable in a wide range of industry such as electronics manufacturing, electronics design, telecommunications, broadcasting, and data communications and ICT-related areas, were able to pass the licensure examinations and other certifications, currently enjoying regular permanent job positions as supervisors, production engineers, process engineers, educators and others, and are working for companies located in Metro Manila and industrial zones in Laguna and Cavite. A significant number work abroad as OFWs. Only a small number are employed in the province of Camarines Sur mainly due to the lack of electronics industries and employment opportunities in the area. The skills the graduates found most useful to their first jobs are critical thinking, problem solving, and communication skills. Suggestions were given such as the inclusion of industry-utilized software and enhancement of the OJT program, more hands-on activities in the curriculum, exposure to industry while studying, and job familiarization among others. The findings of the study can serve as basis for curriculum review and revision to meet the demands of the industry.

Proceedings of the 1988 IEEE international conference on robotics and automation. Volume 1

International Nuclear Information System (INIS)

Anon.

1988-01-01

These proceedings compile the papers presented at the international conference (1988) sponsored by IEEE Council on ''Robotics and Automation''. The subjects discussed were: automation and robots of nuclear power stations; algorithms of multiprocessors; parallel processing and computer architecture; and U.S. DOE research programs on nuclear power plants

Introduction to the IEEE International Symposium on Applications of Ferroelectrics and International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials.

Science.gov (United States)

Ye, Zuo-Guang; Tan, Xiaoli; Bokov, Alexei A

2012-09-01

The 20th IEEE International Symposium on Applications of Ferroelectrics (ISAF) was held on July 24-27, 2011, in Vancouver, British Columbia, Canada, jointly with the International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials (PFM). Over a period of four days, approximately 400 scientists, engineers, and students from around the world presented their work and discussed the latest developments in the field of ferroelectrics, related materials, and their applications. It is particularly encouraging to see that a large number of students (115) were attracted to the joint conference and presented high-quality research works. This trend is not only important to this conference series, but more importantly, it is vital to the future of the ferroelectrics field.

Comments on "On the Power Absorbed and Scattered by an Antenna"

Czech Academy of Sciences Publication Activity Database

Schejbal, V.; Fišer, Ondřej; Ondráček, O.

2011-01-01

Roč. 53, č. 2 (2011), s. 172-174 ISSN 1045-9243 Institutional research plan: CEZ:AV0Z30420517 Keywords : Antennas * antenna theory * receiving antennas * electromagnetic scattering * antenna scattering Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.968, year: 2011 http://ieeexplore.ieee.org/Xplore/login.jsp?url=http%3A%2F%2Fieeexplore.ieee.org%2Fiel5%2F74%2F5949312%2F05949355.pdf%3Ftp%3D%26arnumber%3D5949355%26punumber%3D74&authDecision=-203

Status of the IEEE P896 Future Backplane Bus

International Nuclear Information System (INIS)

Gustavson, D.B.

1983-10-01

The IEEE P896 Future Backplane Bus project has been influenced by and has influenced FASTBUS and several other contemporary bus designs. This paper summarizes the current status of that project, which is directed toward the needs of modern 32-bit microprocessor systems with multiple processors. Some of the technology developed for P896 will be important for future non-ECL implementations of FASTBUS and other buses. In particular, new bus drivers and receivers should greatly improve the performance and reliability of backplane buses and cable buses. The current status of the P896 serial bus is also summarized

IEEE Std 323-1983: IEEE standard for qualifying Class 1E equipment for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard describes the basic requirements for qualifying Class 1E equipment with interfaces that are to be used in nuclear power generating stations. The requirements presented include the principles, procedures, and methods of qualification. These qualification requirements, when met, will confirm the adequacy of the equipment design under normal, abnormal, design basis event, post design basis event, and in-service test conditions for the performance of safety function(s). The purpose of this standard is to identify requirements for the qualification of Class 1E equipment, including those interfaces whose failure could adversely affect the performance of Class 1E equipment and systems. The methods described shall be used for qualifying equipment, extending qualification, and updating qualification if the equipment is modified. Other issued IEEE standards which present qualification methods for specific equipment or components, or both, and those that deal with parts of the qualification program, may be used to supplement this standard, as applicable

Performance Analysis of IEEE 802.11 DCF and IEEE 802.11e EDCA in Non-saturation Condition

Science.gov (United States)

Kim, Tae Ok; Kim, Kyung Jae; Choi, Bong Dae

We analyze the MAC performance of the IEEE 802.11 DCF and 802.11e EDCA in non-saturation condition where device does not have packets to transmit sometimes. We assume that a flow is not generated while the previous flow is in service and the number of packets in a flow is geometrically distributed. In this paper, we take into account the feature of non-saturation condition in standards: possibility of transmission performed without preceding backoff procedure for the first packet arriving at the idle station. Our approach is to model a stochastic behavior of one station as a discrete time Markov chain. We obtain four performance measures: normalized channel throughput, average packet HoL (head of line) delay, expected time to complete transmission of a flow and packet loss probability. Our results can be used for admission control to find the optimal number of stations with some constraints on these measures.

Improving Energy Efficiency in Idle Listening of IEEE 802.11 WLANs

Directory of Open Access Journals (Sweden)

Muhammad Adnan

2016-01-01

Full Text Available This paper aims to improve energy efficiency of IEEE 802.11 wireless local area networks (WLANs by effectively dealing with idle listening (IL, which is required for channel sensing and is unavoidable in a contention-based channel access mechanism. Firstly, we show that IL is a dominant source of energy drain in WLANs and it cannot be effectively alleviated by the power saving mechanism proposed in the IEEE 802.11 standard. To solve this problem, we propose an energy-efficient mechanism that combines three schemes in a systematic way: downclocking, frame aggregation, and contention window adjustment. The downclocking scheme lets a station remain in a semisleep state when overhearing frames destined to neighbor stations, whereby the station consumes the minimal energy without impairing channel access capability. As well as decreasing the channel access overhead, the frame aggregation scheme prolongs the period of semisleep time. Moreover, by controlling the size of contention window based on the number of stations, the proposed mechanism decreases unnecessary IL time due to collision and retransmission. By deriving an analysis model and performing extensive simulations, we confirm that the proposed mechanism significantly improves the energy efficiency and throughput, by up to 2.8 and 1.8 times, respectively, compared to the conventional power saving mechanisms.

A note on bound constraints handling for the IEEE CEC'05 benchmark function suite.

Science.gov (United States)

Liao, Tianjun; Molina, Daniel; de Oca, Marco A Montes; Stützle, Thomas

2014-01-01

The benchmark functions and some of the algorithms proposed for the special session on real parameter optimization of the 2005 IEEE Congress on Evolutionary Computation (CEC'05) have played and still play an important role in the assessment of the state of the art in continuous optimization. In this article, we show that if bound constraints are not enforced for the final reported solutions, state-of-the-art algorithms produce infeasible best candidate solutions for the majority of functions of the IEEE CEC'05 benchmark function suite. This occurs even though the optima of the CEC'05 functions are within the specified bounds. This phenomenon has important implications on algorithm comparisons, and therefore on algorithm designs. This article's goal is to draw the attention of the community to the fact that some authors might have drawn wrong conclusions from experiments using the CEC'05 problems.

Engineering tradeoffs in miniaturization of electronics for very large detectors

International Nuclear Information System (INIS)

Larsen, R.S.

1987-10-01

The trend toward Application-Specific Integrated Circuits and similar systems-on-a-chip-technologies is fueling a new wave of innovation in detector electronics, just in time to address some of the problems being introduced by detectors which will approach a million channels of electronics. The cost-effectiveness of these technologies can be easily demonstrated, and the trend of the past twenty years of achieving more powerful electronics at a lower per-channel cost should receive a major impetus. The investment required in the new technologies will reshape the work force of most laboratories, by providing more and better tools, and by requiring training or retraining of significant numbers of personnel. The need for new instrumentation standards will arise at new levels in the detectors of the future. The laboratories must also invest heavily in integrating various computer aided engineering and computer aided design tools into a smoothly functioning system. They must also establish a new and different kind of working relationship with vendors and suppliers of both basic devices as well as standard packaged products. This paper discusses three concepts

A high-linearity InGaP/GaAs HBT power amplifier for IEEE 802.11a/n

International Nuclear Information System (INIS)

Cui Jie; Chen Lei; Kang Chunlei; Shi Jia; Zhang Xuguang; Ai Baoli; Liu Yi

2013-01-01

A three-stage 4.8–6 GHz monolithic power amplifier (PA) compatible with IEEE 802.11a/n designed based on an advanced 2 μm InGaP/GaAs hetero-junction bipolar transistor (HBT) process is presented. The PA integrates input matching and closed-loop power control circuits on chip. Under 3.3 V DC bias, the amplifier achieves a ∼31 dB small signal gain, excellent wide band input and output matching among overall 1.2 GHz bandwidth, and up to 24.5 dBm linear output power below EVM 3% with IEEE 802.11a 64QAM OFDM input signal. (semiconductor integrated circuits)

Design and implementation of an IEEE 802.11 baseband OFDM transceiver in 0.18 μm CMOS

International Nuclear Information System (INIS)

Wu Bin; Zhou Yumei; Zhu Yongxu; Zhang Zhengdong; Cai Jingjing

2011-01-01

An SISO IEEE 802.11 baseband OFDM transceiver ASIC is implemented. The chip can support all of the SISO IEEE 802.11 work modes by optimizing the key module and sharing the module between the transmitter and receiver. The area and power are decreased greatly compared with other designs. The baseband prototype has been verified under the WLAN baseband test equipment and through transferring the video. The 0.18 μm 1P/6M CMOS technology layout is finished and the chip is fabricated in SMIC, which occupies a 2.6 x 2.6 mm 2 area and consumes 83 mW under typical work modes. (semiconductor integrated circuits)

Design and implementation of an IEEE 802.11 baseband OFDM transceiver in 0.18 μm CMOS

Science.gov (United States)

Bin, Wu; Yumei, Zhou; Yongxu, Zhu; Zhengdong, Zhang; Jingjing, Cai

2011-05-01

An SISO IEEE 802.11 baseband OFDM transceiver ASIC is implemented. The chip can support all of the SISO IEEE 802.11 work modes by optimizing the key module and sharing the module between the transmitter and receiver. The area and power are decreased greatly compared with other designs. The baseband prototype has been verified under the WLAN baseband test equipment and through transferring the video. The 0.18 μm 1P/6M CMOS technology layout is finished and the chip is fabricated in SMIC, which occupies a 2.6 × 2.6 mm2 area and consumes 83 mW under typical work modes.

Design and implementation of an IEEE 802.11 baseband OFDM transceiver in 0.18 {mu}m CMOS

Energy Technology Data Exchange (ETDEWEB)

Wu Bin; Zhou Yumei; Zhu Yongxu; Zhang Zhengdong; Cai Jingjing, E-mail: wubin@ime.ac.cn [Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029 (China)

2011-05-15

An SISO IEEE 802.11 baseband OFDM transceiver ASIC is implemented. The chip can support all of the SISO IEEE 802.11 work modes by optimizing the key module and sharing the module between the transmitter and receiver. The area and power are decreased greatly compared with other designs. The baseband prototype has been verified under the WLAN baseband test equipment and through transferring the video. The 0.18 {mu}m 1P/6M CMOS technology layout is finished and the chip is fabricated in SMIC, which occupies a 2.6 x 2.6 mm{sup 2} area and consumes 83 mW under typical work modes. (semiconductor integrated circuits)

Analysis of Adaptive Control Scheme in IEEE 802.11 and IEEE 802.11e Wireless LANs

Science.gov (United States)

Lee, Bih-Hwang; Lai, Hui-Cheng

In order to achieve the prioritized quality of service (QoS) guarantee, the IEEE 802.11e EDCAF (the enhanced distributed channel access function) provides the distinguished services by configuring the different QoS parameters to different access categories (ACs). An admission control scheme is needed to maximize the utilization of wireless channel. Most of papers study throughput improvement by solving the complicated multidimensional Markov-chain model. In this paper, we introduce a back-off model to study the transmission probability of the different arbitration interframe space number (AIFSN) and the minimum contention window size (CWmin). We propose an adaptive control scheme (ACS) to dynamically update AIFSN and CWmin based on the periodical monitoring of current channel status and QoS requirements to achieve the specific service differentiation at access points (AP). This paper provides an effective tuning mechanism for improving QoS in WLAN. Analytical and simulation results show that the proposed scheme outperforms the basic EDCAF in terms of throughput and service differentiation especially at high collision rate.

Query Log Analysis of an Electronic Health Record Search Engine

Science.gov (United States)

Yang, Lei; Mei, Qiaozhu; Zheng, Kai; Hanauer, David A.

2011-01-01

We analyzed a longitudinal collection of query logs of a full-text search engine designed to facilitate information retrieval in electronic health records (EHR). The collection, 202,905 queries and 35,928 user sessions recorded over a course of 4 years, represents the information-seeking behavior of 533 medical professionals, including frontline practitioners, coding personnel, patient safety officers, and biomedical researchers for patient data stored in EHR systems. In this paper, we present descriptive statistics of the queries, a categorization of information needs manifested through the queries, as well as temporal patterns of the users’ information-seeking behavior. The results suggest that information needs in medical domain are substantially more sophisticated than those that general-purpose web search engines need to accommodate. Therefore, we envision there exists a significant challenge, along with significant opportunities, to provide intelligent query recommendations to facilitate information retrieval in EHR. PMID:22195150

SELF-POWERED WIRELESS SENSOR NODE POWER MODELING BASED ON IEEE 802.11 COMMUNICATION PROTOCOL

Energy Technology Data Exchange (ETDEWEB)

Vivek Agarwal; Raymond A. DeCarlo; Lefteri H. Tsoukalas

2016-04-01

considerations that must also be taken into account when computing the power consumption associated with each task. The considerations includes: number of events occurring in a fixed active time period and the duration of each event, event-information processing time, total communication time, number of retransmission, etc. Additionally, at the network level the communication of information data packets between WSNs involves collisions, latency, andretransmission, which result in unanticipated power losses. This paper presents stochastic modeling of power demand for a schedule-driven WSN utilizing Institute of Electrical and Electronics Engineers, IEEE, 802.11 communication protocols. The model captures the generic operation of a schedule-driven WSN when an external event occurs, i.e., sensing, following by processing, and followed by communication. The results are verified via simulation.

Human exposure standards in the frequency range 1 Hz To 100 kHz: the case for adoption of the IEEE standard.

Science.gov (United States)

Patrick Reilly, J

2014-10-01

Differences between IEEE C95 Standards (C95.6-2002 and C95.1-2005) in the low-frequency (1 Hz-100 kHz) and the ICNIRP-2010 guidelines appear across the frequency spectrum. Factors accounting for lack of convergence include: differences between the IEEE standards and the ICNIRP guidelines with respect to biological induction models, stated objectives, data trail from experimentally derived thresholds through physical and biological principles, selection and justification of safety/reduction factors, use of probability models, compliance standards for the limbs as distinct from the whole body, defined population categories, strategies for central nervous system protection below 20 Hz, and correspondence of environmental electric field limits with contact currents. This paper discusses these factors and makes the case for adoption of the limits in the IEEE standards.

Adaptive Radio Resource Allocation in Hierarchical QoS Scheduling for IEEE 802.16 Systems

DEFF Research Database (Denmark)

Wang, Hua; Dittmann, Lars

2007-01-01

Future mobile communication systems such as IEEE 802.16 are expected to deliver a variety of multimedia services with diverse QoS requirements. To guarantee the QoS provision, appropriate scheduler architecture and scheduling algorithms have to be carefully designed. In this paper, we propose...

IEEE 1394 CAMERA IMAGING SYSTEM FOR BROOKHAVENS BOOSTER APPLICATION FACILITY BEAM DIAGNOSTICS

International Nuclear Information System (INIS)

BROWN, K.A.; FRAK, B.; GASSNER, D.; HOFF, L.; OLSEN, R.H.; SATOGATA, T.; TEPIKIAN, S.

2002-01-01

Brookhaven's Booster Applications Facility (BAF) will deliver resonant extracted heavy ion beams from the AGS Booster to short-exposure fixed-target experiments located at the end of the BAF beam line. The facility is designed to deliver a wide range of heavy ion species over a range of intensities from 10 3 to over 10 8 ions/pulse, and over a range of energies from 0.1 to 3.0 GeV/nucleon. With these constraints we have designed instrumentation packages which can deliver the maximum amount of dynamic range at a reasonable cost. Through the use of high quality optics systems and neutral density light filters we will achieve 4 to 5 orders of magnitude in light collection. By using digital IEEE1394 camera systems we are able to eliminate the frame-grabber stage in processing and directly transfer data at maximum rates of 400 Mb/set. In this note we give a detailed description of the system design and discuss the parameters used to develop the system specifications. We will also discuss the IEEE1394 camera software interface and the high-level user interface

Surface electromyography physiology, engineering and applications

CERN Document Server

Farina, Dario

2016-01-01

The book presents a quantitative approach to the study and use of noninvasively detected electromyographic (EMG) signals, as well as their numerous applications in various aspects of the life sciences. Surface Electromyography: Physiology, Engineering, and Applications is an update of Electromyography: Physiology, Engineering, and Noninvasive Applications (Wiley-IEEE Press, 2004) and focuses on the developments that have taken place over the last decade. The first nine chapters deal with the generation, detection, understanding, interpretation, and modeling of EMG signals. Detection technology, with particular focus on EMG imaging techniques that are based on two-dimensional electrode arrays are also included in the first half of the book. The latter 11 chapters deal with applications, which range fro monitoring muscle fatigue, electrically elicited contractions, posture analysis, prevention of work-related and child-delivery-related neuromuscular disorders, ergonomics, movement analysis, physical therapy, ex...

Expanding Usability of Virtual Network Laboratory in IT Engineering Education

Directory of Open Access Journals (Sweden)

Dalibor M Dobrilovic

2013-02-01

Full Text Available This paper deals with importance of virtual network laboratories usage in IT engineering education. It presents the particular virtual network laboratory model developed for usage in Computer Networks course as well. This virtual network laboratory, called VNLab, is based on virtualization technology. It has been successfully tested in educational process of Computer Network course for IT undergraduate students. Its usability for network related courses is analyzed by comparison of recommended curricula’s of world organizations such as IEEE, ACM and AIS. This paper is focused on expanding the usability of this virtual network laboratory to other non-network related courses. The primary expansion field is in domain of IT System Administration, IT Systems and Data Security and Operating Systems as well. The possible learning scenarios, learning tools and concepts for making this system applicable in these three additional fields are presented by the analyses of compatibility with recommended learning topics and outcomes by IEEE, ACM and AIS.

The roles of electronic books in the transformation of learning and instruction

NARCIS (Netherlands)

Huang, Ronghuai; Chen, Nian-Shing; Kang, Myunghee; McKenney, Susan; Churchill, Daniel

2014-01-01

Huang, R., Chen, N., Kang, M. McKenney, S. & Churchill, D. (2013). The roles of electronic books in the transformation of learning and instruction. In N. Chen, R. Huang, Kinshuk, Y. Li, D. G. Sampson (Eds.) Proceedings of the IEEE 13th International Conference on Advanced Learning Technologies

Statistical Software Engineering

Science.gov (United States)

1998-04-13

multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

15 CFR 740.17 - Encryption commodities, software and technology (ENC).

Science.gov (United States)

2010-01-01

... products) providing secure Wide Area Network (WAN), Metropolitan Area Network (MAN), Virtual Private... Electrical and Electronic Engineers (IEEE) 802.11 wireless LAN standard (35 meters) for short-range use and...) Client Internet appliance and client wireless LAN cards; or (J) Other items as determined on a case-by...

78 FR 18817 - Revisions to Reliability Standard for Transmission Vegetation Management

Science.gov (United States)

2013-03-28

... used in the technical reference paper [Exh. A of NERC's petition].'' \\25\\ \\24\\ NERC Petition, Ex. I... set by Institute of Electric and Electronics Engineers (IEEE) Standard 516 that, as indicated in Order... Power Research Institute (EPRI) is planning to undertake field tests of energized high voltage conductor...

My Career and the "Rhetoric of" Technical Writing and Communication

Science.gov (United States)

Schuster, Mary Lay

2015-01-01

This article traces the history of Mary Schuster's career in technical writing and communication from 1968 when she took a position in the Publications Department at the Institute of Electrical and Electronics Engineers (IEEE) to her work at "Technical Communication Quarterly" ("TCQ") in 2003 and forward. She discusses the…

Predictable and reliable ECG monitoring over IEEE 802.11 WLANs within a hospital.

Science.gov (United States)

Park, Juyoung; Kang, Kyungtae

2014-09-01

Telecardiology provides mobility for patients who require constant electrocardiogram (ECG) monitoring. However, its safety is dependent on the predictability and robustness of data delivery, which must overcome errors in the wireless channel through which the ECG data are transmitted. We report here a framework that can be used to gauge the applicability of IEEE 802.11 wireless local area network (WLAN) technology to ECG monitoring systems in terms of delay constraints and transmission reliability. For this purpose, a medical-grade WLAN architecture achieved predictable delay through the combination of a medium access control mechanism based on the point coordination function provided by IEEE 802.11 and an error control scheme based on Reed-Solomon coding and block interleaving. The size of the jitter buffer needed was determined by this architecture to avoid service dropout caused by buffer underrun, through analysis of variations in transmission delay. Finally, we assessed this architecture in terms of service latency and reliability by modeling the transmission of uncompressed two-lead electrocardiogram data from the MIT-BIH Arrhythmia Database and highlight the applicability of this wireless technology to telecardiology.

High Energy Electron Detectors on Sphinx

Science.gov (United States)

Thompson, J. R.; Porte, A.; Zucchini, F.; Calamy, H.; Auriel, G.; Coleman, P. L.; Bayol, F.; Lalle, B.; Krishnan, M.; Wilson, K.

2008-11-01

Z-pinch plasma radiation sources are used to dose test objects with K-shell (˜1-4keV) x-rays. The implosion physics can produce high energy electrons (> 50keV), which could distort interpretation of the soft x-ray effects. We describe the design and implementation of a diagnostic suite to characterize the electron environment of Al wire and Ar gas puff z-pinches on Sphinx. The design used ITS calculations to model detector response to both soft x-rays and electrons and help set upper bounds to the spurious electron flux. Strategies to discriminate between the known soft x-ray emission and the suspected electron flux will be discussed. H.Calamy et al, ``Use of microsecond current prepulse for dramatic improvements of wire array Z-pinch implosion,'' Phys Plasmas 15, 012701 (2008) J.A.Halbleib et al, ``ITS: the integrated TIGER series of electron/photon transport codes-Version 3.0,'' IEEE Trans on Nuclear Sci, 39, 1025 (1992)

A Green Media Access Method for IEEE 802.15.6 Wireless Body Area Network.

Science.gov (United States)

Jacob, Anil K; Jacob, Lillykutty

2017-09-30

It is of utmost importance to conserve battery energy to the maximum possible extent in WBAN nodes while collecting and transferring medical data. The IEEE 802.15.6 WBAN standard does not specify any method to conserve energy. This paper focuses on a method to conserve energy in IEEE 802.15.6 WBAN nodes when using CSMA/CA, while simultaneously restricting data delivery delay to the required value as specified in medical applications. The technique is to allow the nodes to sleep all the times except for receiving beacons and for transmitting data frames whenever a data frame enters an empty buffer. The energy consumed by the nodes and the average latency of data frame for periodical arrival of data are found out analytically. The analytical results are validated and also the proposed method is compared with other energy conserving schemes, using Castalia simulation studies. The proposed method shows superior performance in both device lifetime and latency of emergency medical data.

WIH-based IEEE 802.11 ECG monitoring implementation.

Science.gov (United States)

Moein, A; Pouladian, M

2007-01-01

New wireless technologies make possible the implementation of high level integration wireless devices which allow the replacement of traditional large wired monitoring devices. It offers new functionalities to physicians and will reduce the costs. Among these functionalities, biomedical signals can be sent to other devices (PDA, PC . . . ) or processing centers, without restricting the patients' mobility. This article discusses the WIH (Ward-In-Hand) structure and the software required for its implementation before an operational example is presented with its results. The aim of this project is the development and implementation of a reduced size electrocardiograph based on IEEE 802.11 with high speed and more accuracy, which allows wireless monitoring of patients, and the insertion of the information into the Wi-Fi hospital networks.

[Mobile Health: IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices].

Science.gov (United States)

Zhou, Xia; Wu, Wenli; Bao, Shudi

2015-07-01

IEEE Std 1708-2014 breaks through the traditional standards of cuff based blood pressure measuring devices and establishes a normative definition of wearable cuffless blood pressure measuring devices and the objective performance evaluation of this kind of devices. This study firstly introduces the background of the new standard. Then, the standard details will be described, and the impact of cuffless blood pressure measuring devices with the new standard on manufacturers and end users will be addressed.

Electron-phonon interaction and scattering in Si and Ge: Implications for phonon engineering

International Nuclear Information System (INIS)

Tandon, Nandan; Albrecht, J. D.; Ram-Mohan, L. R.

2015-01-01

We report ab-initio results for electron-phonon (e-ph) coupling and display the existence of a large variation in the coupling parameter as a function of electron and phonon dispersion. This variation is observed for all phonon modes in Si and Ge, and we show this for representative cases where the initial electron states are at the band gap edges. Using these e-ph matrix elements, which include all possible phonon modes and electron bands within a relevant energy range, we evaluate the imaginary part of the electron self-energy in order to obtain the associated scattering rates. The temperature dependence is seen through calculations of the scattering rates at 0 K and 300 K. The results provide a basis for understanding the impacts of phonon scattering vs. orientation and geometry in the design of devices, and in analysis of transport phenomena. This provides an additional tool for engineering the transfer of energy from carriers to the lattice

Proceedings of the 19th (1988) annual IEEE power electronics specialists conference

International Nuclear Information System (INIS)

Anon.

1988-01-01

These proceedings compile papers on power electronics. Topics include: Superconducting Magnetic Energy Storage (SMES); Power control experiments with SMES; Quench protection at cryogenic temperatures; Power system stabilization by SMES; compensation of industrial load variation with SMES; high voltage power supplies with photovoltaic cell arrays; and simulation of photovoltaic systems

A Security Solution for IEEE 802.11's Ad-hoc Mode:Password-Authentication and Group Diffie-Hellman Key Exchange

Energy Technology Data Exchange (ETDEWEB)

Emmanuel, Bresson; Olivier, Chevassut; David, Pointcheval

2005-10-01

The IEEE 802 standards ease the deployment of networkinginfrastructures and enable employers to accesscorporate networks whiletraveling. These standards provide two modes of communication calledinfrastructure and ad-hoc modes. A security solution for the IEEE802.11's infrastructure mode took several years to reach maturity andfirmware are still been upgraded, yet a solution for the ad-hoc modeneeds to be specified. The present paper is a first attempt in thisdirection. It leverages the latest developments in the area ofpassword-based authentication and (group) Diffie-Hellman key exchange todevelop a provably-secure key-exchange protocol for IEEE 802.11's ad-hocmode. The protocol allows users to securely join and leave the wirelessgroup at time, accommodates either a single-shared password orpairwise-shared passwords among the group members, or at least with acentral server; achieves security against dictionary attacks in theideal-hash model (i.e. random-oracles). This is, to the best of ourknowledge, the first such protocol to appear in the cryptographicliterature.

Performance Analysis of IEEE 802.15.6 CSMA/CA Protocol for WBAN Medical Scenario through DTMC Model.

Science.gov (United States)

Kumar, Vivek; Gupta, Bharat

2016-12-01

The newly drafted IEEE 802.15.6 standard for Wireless Body Area Networks (WBAN) has been concentrating on a numerous medical and non-medical applications. Such short range wireless communication standard offers ultra-low power consumption with variable data rates from few Kbps to Mbps in, on or around the proximity of the human body. In this paper, the performance analysis of carrier sense multiple access with collision avoidance (CSMA/CA) scheme based on IEEE 802.15.6 standard in terms of throughput, reliability, clear channel assessment (CCA) failure probability, packet drop probability, and end-to-end delay has been presented. We have developed a discrete-time Markov chain (DTMC) to significantly evaluate the performances of IEEE 802.15.6 CSMA/CA under non-ideal channel condition having saturated traffic condition including node wait time and service time. We also visualize that, as soon as the payload length increases the CCA failure probability increases, which results in lower node's reliability. Also, we have calculated the end-to-end delay in order to prioritize the node wait time cause by backoff and retransmission. The user priority (UP) wise DTMC analysis has been performed to show the importance of the standard especially for medical scenario.

Industry careers for the biomedical engineer.

Science.gov (United States)

Munzner, Robert F

2004-01-01

This year's conference theme is "linkages for innovation in biomedicine." Biomedical engineers, especially those transitioning their career from academic study into medical device industry, will play a critical role in converting the fruits of scientific research into the reality of modern medical devices. This special session is organized to help biomedical engineers to achieve their career goals more effectively. Participants will have opportunities to hear from and interact with leading industrial experts on many issues. These may include but not limited to 1) career paths for biomedical engineers (industrial, academic, or federal; technical vs. managerial track; small start-up or large established companies); 2) unique design challenges and regulatory requirements in medical device development; 3) aspects of a successful biomedical engineering job candidate (such as resume, interview, follow-up). Suggestions for other topics are welcome and should be directed to xkong@ieee.org The distinguished panelists include: Xuan Kong, Ph.D., VP of Research, NEUROMetrix Inc, Waltham, MA Robert F. Munzner, Ph.D., Medical Device Consultant, Doctor Device, Herndon, VA Glen McLaughlin, Ph.D., VP of Engineering and CTO, Zonare Medical System Inc., Mountain View, CA Grace Bartoo, Ph.D., RAC, General Manager, Decus Biomedical LLC San Carlos, CA.

IEEE Std 383-1974: IEEE standard for type test of Class IE electric cables, field splices, and connections for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard provides direction for establishing type tests which may be used in qualifying Class 1E electric cables, field splices, and other connections for service in nuclear power generating stations. General guidelines for qualifications are given in IEEE Std 323-1974, Standard for Qualifying Class IE Electric Equipment for Nuclear Power Generating Stations. Categories of cables covered are those used for power control and instrumentation services. Though intended primarily to pertain to cable for field installation, this guide may also be used for the qualification of internal wiring of manufactured devices. This guide does not cover cables for service within the reactor vessel

Vibration aging of diesel-engine mounted electrical equipment

International Nuclear Information System (INIS)

Lee, B.J.; Morton, W.C.

1994-01-01

The Emergency Diesel Generator (EDG) in a Nuclear Power Plant is considered to be a component which is essential to safe plant operation. Failures of auxiliary equipment directly mounted on the EDG creates costly repairs, and compromises the engine's availability and reliability. Although IEEE-323 requires addressing of safety-related components due to mechanically induced vibration, very few guidelines exist in the nuclear industry to show how this may be accounted for. Most engine vendors rely on the empirical experience data as the basis of their evaluation for vibration. Upgrade of engine controls, addition of monitoring devices and other engine modifications require design and installation of new equipment to be mounted directly on the engine. This necessitates the evaluation for engine-induced vibration which is considered to be one of the most severe design parameters. This paper discusses the engine vibration characteristics, and the acquisition of extensive field vibration data on the diesel engine under operating conditions. The data is then used to develop life cycle vibration qualification test profiles that can be applied with confidence in a laboratory environment to qualify engine-mounted equipment. The intent is to validate a product's ability to survive under worst case, extended service on-engine conditions. This paper describes the procedures and approaches used to achieve those goals, and provides developed profile examples and test results

2012 Special NSREC Issue of the IEEE Transactions on Nuclear Science Comments by the Editors

Science.gov (United States)

Schwank, Jim; Brown, Dennis; Girard, Sylvain; Gouker, Pascale; Gerardin, Simone; Quinn, Heather; Barnaby, Hugh

2012-12-01

The December 2012 special issue of the IEEE Transactions on Nuclear Science contains selected papers from the 49th annual IEEE International Nuclear and Space Radiation Effects Conference (NSREC) held July 16-20, 2012, in Miami, Florida USA. 95 papers presented at the 2012 NSREC were submitted for consideration for this year’s special issue. Those papers that appear in this special issue were able to successfully complete the review process before the deadline for the December issue. A few additional papers may appear in subsequent issues of the TRANSACTIONS. This publication is the premier archival journal for research on space and nuclear radiation effects in materials, devices, circuits, and systems. This distinction is the direct result of the conscientious efforts of both the authors, who present and document their work, and the reviewers, who selflessly volunteer their time and talent to help review the manuscripts. Each paper in this journal has been reviewed by experts selected by the editors for their expertise and knowledge of the particular subject areas. The peer review process for a typical technical journal generally takes six months to one year to complete. To publish this special issue of the IEEE Transactions on Nuclear Science (in December), the review process, from initial submission to final form, must be completed in about 10 weeks. Because of the short schedule, both the authors and reviewers are required to respond very quickly. The reviewers listed on the following pages contributed vitally to this quick-turn review process.We would like to express our sincere appreciation to each of them for accepting this difficult, but critical role in the process. To provide consistent reviews of papers throughout the year, the IEEE Transactions on Nuclear Science relies on a year-round editorial board that manages reviews for submissions throughout the year to the TRANSACTIONS in the area of radiation effects. The review process is managed by a Senior

Photonics applications and web engineering: WILGA Winter 2016

Science.gov (United States)

Romaniuk, Ryszard S.

2016-09-01

Since twenty years, young researchers form the Institute of Electronic Systems, Warsaw University of Technology, organize two times a year, under only a marginal supervision of the senior faculty members, under the patronage of WEiTI PW, KEiT PAN, SPIE, IEEE, PKOpto SEP and PSF, the WILGA Symposium on advanced, integrated functional electronic, photonic and mechatronic systems [1-5]. All aspects are considered like: research and development, theory and design, technology - material and construction, software and hardware, commissioning and tests, as well as pilot and practical applications. The applications concern mostly, which turned after several years to be a proud specialization of the WILGA Symposium, Internet engineering, high energy physics experiments, new power industry including fusion, nuclear industry, space and satellite technologies, telecommunications, smart municipal environment, as well as biology and medicine [6-8]. XXXVIIth WILGA Symposium was held on 29-31 January 2016 and gathered a few tens of young researchers active in the mentioned research areas. There were presented a few tens of technical papers which will be published in Proc.SPIE together with the accepted articles from the Summer Edition of the WILGA Symposium scheduled for 29.05-06.06.2016. This article is a digest of chosen presentations from WILGA Symposium 2016 Winter Edition. The survey is narrowed to a few chosen and main topical tracks, like electronics and photonics design using industrial standards like ATCA/MTCA, also particular designs of functional systems using this series of industrial standards. The paper, summarizing traditionally since many years the accomplished WILGA Symposium organized by young researchers from Warsaw University of Technology, is also the following part of a cycle of papers concerning their participation in design of new generations of electronic systems used in discovery experiments in Poland and in leading research laboratories of the world.

Rate Adaptation Based on Collision Probability for IEEE 802.11 WLANs

Science.gov (United States)

Kim, Taejoon; Lim, Jong-Tae

Nowadays IEEE 802.11 wireless local area networks (WLANs) support multiple transmission rates. To achieve the best performance, transmitting stations adopt the various forms of automatic rate fallback (ARF). However, ARF suffers from severe performance degradation as the number of transmitting stations increases. In this paper, we propose a new rate adaptation scheme which adjusts the ARF's up/down threshold according to the channel contention level. Simulation result shows that the proposed scheme achieves fairly good performance compared with the existing schemes.

Comparison and Analysis of IEEE 344 and IEC 60980 standards for harmonization of seismic qualification of safety-related equipment

International Nuclear Information System (INIS)

Lee, Young Ok; Kim, Jong Seog; Seo, Jeong Ho; Kim, Myung Jun

2011-01-01

The seismic qualification of safety related equipment in nuclear power plants should demonstrate an equipment's ability to perform its safety function during/or after the time it is subjected to the forces resulting from one SSE. In addition, the equipment must withstand the effects of a number of OBEs, preceding the SSE. IEEE 344 and IEC 60980 present the criteria for establishing procedures demonstrating that the Class 1E equipment can meet its performance requirement during seismic events. Currently, IEEE 344 is used for regulation of nuclear power plant in the United State whereas IEC 60980 is mainly used in Europe. In particular, NPPs of France and China apply with RCC-E and GB that are domestic standards, respectively. Equipment supplier and Utility have difficulties because of different applicable standards. Equipment supplier to export S/R components/equipment to other standard area performs additional seismic qualification. For example, equipment are qualifies according to IEC 60980, RCC-E, GB although they have been qualified in accordance with IEEE 344. Also, utility to attempt power up-rate, life extension of NPP constructed under rules of RCC-E such as Ulchin NPP 1 and 2 has similar difficulties. RCC-E endorses IEC 60980 and GB is almost same as IEC 60980 except minor difference of earthquake environment definition. Therefore this paper surveys the similarities and differences between IEEE 344 and IEC 60980. In addition, this paper considers how the two sets of standards may be used in a complementary fashion to be possible using one or the other standard area

Modification of Electron Cyclotron Maser Operation by Application of an External Signal.

Science.gov (United States)

1987-03-31

start-up phase jitter in the presence of this external priming signal can be estimated by using the method of David [30]. A lumped circuit representation...27. K.E. Kreischer, R.J. Temkin, H.R. Fetterman , and W.I. Mulligan, IEEE Trans. Microwave Theory Tech. MTT-32, 481 (1984). 28. I.G. Zarnitsyna and G.S...Nusinovich, Radiophys. Quant. Electron. 17, 1418 (1974). 29. G.S. Nusinovich, Radiophys. Quant. Electron. 19, 1301 (1976). 30. E.E. David Jr., Proc

Validation of a zero-dimensional model for prediction of NOx and engine performance for electronically controlled marine two-stroke diesel engines

International Nuclear Information System (INIS)

Scappin, Fabio; Stefansson, Sigurður H.; Haglind, Fredrik; Andreasen, Anders; Larsen, Ulrik

2012-01-01

The aim of this paper is to derive a methodology suitable for energy system analysis for predicting the performance and NO x emissions of marine low speed diesel engines. The paper describes a zero-dimensional model, evaluating the engine performance by means of an energy balance and a two zone combustion model using ideal gas law equations over a complete crank cycle. The combustion process is divided into intervals, and the product composition and flame temperature are calculated in each interval. The NO x emissions are predicted using the extended Zeldovich mechanism. The model is validated using experimental data from two MAN B and W engines; one case being data subject to engine parameter changes corresponding to simulating an electronically controlled engine; the second case providing data covering almost all model input and output parameters. The first case of validation suggests that the model can predict specific fuel oil consumption and NO x emissions within the 95% confidence intervals given by the experimental measurements. The second validation confirms the capability of the model to match measured engine output parameters based on measured engine input parameters with a maximum 5% deviation. - Highlights: ► A fast realistic model of a marine two-stroke low speed diesel engine was derived. ► The model is fast and accurate enough for future complex energy systems analysis. ► The effects of engine tuning were validated with experimental tests. ► The model was validated while constrained by experimental input and output data.

Adaptive Backoff Algorithm for Contention Window for Dense IEEE 802.11 WLANs

Directory of Open Access Journals (Sweden)

Ikram Syed

2016-01-01

Full Text Available The performance improvement in IEEE 802.11 WLANs in widely fluctuating network loads is a challenging task. To improve the performance in this saturated state, we develop an adaptive backoff algorithm that maximizes the system throughput, reduces the collision probability, and maintains a high fairness for the IEEE 802.11 DCF under dense network conditions. In this paper, we present two main advantages of the proposed ABA-CW algorithm. First, it estimates the number of active stations and then calculates an optimal contention window based on the active station number. Each station calculates the channel state probabilities by observing the channel for the total backoff period. Based on these channel states probabilities, each station can estimate the number of active stations in the network, after which it calculates the optimal CW utilizing the estimated active number of stations. To evaluate the proposed mechanism, we derive an analytical model to determine the network performance. From our results, the proposed ABA-CW mechanism achieved better system performance compared to fixed-CW (BEB, EIED, LILD, and SETL and adaptive-CW (AMOCW, Idle Sense mechanisms. The simulation results confirmed the outstanding performance of the proposed mechanism in that it led to a lower collision probability, higher throughput, and high fairness.

An Electron-Beam Controlled Semiconductor Switch

Science.gov (United States)

1989-11-01

of the Seventeenth Power Modulator Symposium, Seattle, WA, pp. 214-218. 1986. 21. Bovino , L., ’ioumans,R., Weiner, H., Burke, T . , "Optica lly... Bovino , R. Youmans, M. Weiner, and T. Burke, ’ ’Optically Co ntrolled Semiconducto r Switch for ~lulti-~legawatt Rep-Rated Pulse r s ," Conf. Record...p. 615. (II 1 W. N. Carr, IEEE Trans. Electron Devices, vol. ED-12, p. 531 , 1965. (121 T. Burke, M. Weiner. L. Bovino , and R. Youmans, in Proc

Cross-Layer Measurement on an IEEE 802.11g Wireless Network Supporting MPEG-2 Video Streaming Applications in the Presence of Interference

Directory of Open Access Journals (Sweden)

Alessandro Sona

2010-01-01

Full Text Available The performance of wireless local area networks supporting video streaming applications, based on MPEG-2 video codec, in the presence of interference is here dealt with. IEEE 802.11g standard wireless networks, that do not support QoS in according with IEEE 802.11e standard, are, in particular, accounted for and Bluetooth signals, additive white Gaussian noise, and competitive data traffic are considered as sources of interference. The goal is twofold: from one side, experimentally assessing and correlating the values that some performance metrics assume at the same time at different layers of an IEEE 802.11g WLAN delivering video streaming in the presence of in-channel interference; from the other side, deducing helpful and practical hints for designers and technicians, in order to efficiently assess and enhance the performance of an IEEE 802.11g WLAN supporting video streaming in some suitable setup conditions and in the presence of interference. To this purpose, an experimental analysis is planned following a cross-layer measurement approach, and a proper testbed within a semianechoic chamber is used. Valuable results are obtained in terms of signal-to-interference ratio, packet loss ratio, jitter, video quality, and interference data rate; helpful hints for designers and technicians are finally gained.

Structural and electronic properties of in-plane phase engineered WSe2: A DFT study

Science.gov (United States)

Bhart, Ankush; Kapoor, Pooja; Sharma, Munish; Sharma, Raman; Ahluwalia, P. K.

2018-04-01

We present first principal investigations on structural and electronic properties of in-plane phase engineered WSe2 with armchair type interface. The 2H and 1T phases of WSe2, joined along x-direction is a natural metal-semiconductor heterostructure and therefore shows potential for applications in 2D electronics and opto-electronics. The electronic properties transit towards metallic 1T region. No inflections across interface shows negligible mismatch strain which is unlike what has been reported for MoS2. Charge density analysis shows charge accumulation on 1T domain. This can lead to reduction of Schottky barrier heights at the metal-semiconductor junction. STM analysis confirms transition of 1T phase towards distorted 1T' structure. The present results provide essential insights for nano-devices using 2D hybrid materials.

A Fair Cooperative MAC Protocol in IEEE 802.11 WLAN

Directory of Open Access Journals (Sweden)

Seyed Davoud Mousavi

2018-05-01

Full Text Available Cooperative communication techniques have recently enabled wireless technologies to overcome their challenges. The main objective of these techniques is to improve resource allocation. In this paper, we propose a new protocol in medium access control (MAC of the IEEE 802.11 standard. In our new protocol, which is called Fair Cooperative MAC (FC-MAC, every relay node participates in cooperation proportionally to its provided cooperation gain. This technique improves network resource allocation by exploiting the potential capacity of all relay candidates. Simulation results demonstrate that the FC-MAC protocol presents better performance in terms of throughput, fairness, and network lifetime.

On the network convergence process in RPL over IEEE 802.15.4 multihop networks: improvement and trade-offs.

Science.gov (United States)

Kermajani, Hamidreza; Gomez, Carles

2014-07-07

The IPv6 Routing Protocol for Low-power and Lossy Networks (RPL) has been recently developed by the Internet Engineering Task Force (IETF). Given its crucial role in enabling the Internet of Things, a significant amount of research effort has already been devoted to RPL. However, the RPL network convergence process has not yet been investigated in detail. In this paper we study the influence of the main RPL parameters and mechanisms on the network convergence process of this protocol in IEEE 802.15.4 multihop networks. We also propose and evaluate a mechanism that leverages an option available in RPL for accelerating the network convergence process. We carry out extensive simulations for a wide range of conditions, considering different network scenarios in terms of size and density. Results show that network convergence performance depends dramatically on the use and adequate configuration of key RPL parameters and mechanisms. The findings and contributions of this work provide a RPL configuration guideline for network convergence performance tuning, as well as a characterization of the related performance trade-offs.

On the Network Convergence Process in RPL over IEEE 802.15.4 Multihop Networks: Improvement and Trade-Offs

Directory of Open Access Journals (Sweden)

Hamidreza Kermajani

2014-07-01

Full Text Available The IPv6 Routing Protocol for Low-power and Lossy Networks (RPL has been recently developed by the Internet Engineering Task Force (IETF. Given its crucial role in enabling the Internet of Things, a significant amount of research effort has already been devoted to RPL. However, the RPL network convergence process has not yet been investigated in detail. In this paper we study the influence of the main RPL parameters and mechanisms on the network convergence process of this protocol in IEEE 802.15.4 multihop networks. We also propose and evaluate a mechanism that leverages an option available in RPL for accelerating the network convergence process. We carry out extensive simulations for a wide range of conditions, considering different network scenarios in terms of size and density. Results show that network convergence performance depends dramatically on the use and adequate configuration of key RPL parameters and mechanisms. The findings and contributions of this work provide a RPL configuration guideline for network convergence performance tuning, as well as a characterization of the related performance trade-offs.

An Asynchronous IEEE Floating-Point Arithmetic Unit

Directory of Open Access Journals (Sweden)

Joel R. Noche

2007-12-01

Full Text Available An asynchronous floating-point arithmetic unit is designed and tested at the transistor level usingCadence software. It uses CMOS (complementary metal oxide semiconductor and DCVS (differentialcascode voltage switch logic in a 0.35 µm process using a 3.3 V supply voltage, with dual-rail data andsingle-rail control signals using four-phase handshaking.Using 17,085 transistors, the unit handles single-precision (32-bit addition/subtraction, multiplication,division, and remainder using the IEEE 754-1985 Standard for Binary Floating-Point Arithmetic, withrounding and other operations to be handled by separate hardware or software. Division and remainderare done using a restoring subtractive algorithm; multiplication uses an additive algorithm. Exceptionsare noted by flags (and not trap handlers and the output is in single-precision.Previous work on asynchronous floating-point arithmetic units have mostly focused on single operationssuch as division. This is the first work to the authors' knowledge that can perform floating-point addition,multiplication, division, and remainder using a common datapath.

Performance characterization of the IEEE 802.11 signal transmission over a multimode fiber PON

Science.gov (United States)

Maksymiuk, L.; Siuzdak, J.

2014-11-01

In this paper there are presented measurements concerning performance analysis of the IEEE 802.11 signal distribution over multimode fiber based passive optical network. In the paper there are addressed three main sources of impairments: modal noise, frequency response fluctuation of the multimode fiber and non-linear distortion of the signal in the receiver.

Multitemporal Very High Resolution From Space: Outcome of the 2016 IEEE GRSS Data Fusion Contest

NARCIS (Netherlands)

Mou, L.; Zhu, X.; Vakalopoulou, M.; Karantzalos, K.; Paragios, N.; Saux, Le B.; Moser, G.; Tuia, D.

2017-01-01

In this paper, the scientific outcomes of the 2016 Data Fusion Contest organized by the Image Analysis and Data Fusion Technical Committee of the IEEE Geoscience and Remote Sensing Society are discussed. The 2016 Contest was an open topic competition based on a multitemporal and multimodal dataset,

Comparing the Scale of Web Subject Directories Precision in Technical-Engineering Information Retrieval

Directory of Open Access Journals (Sweden)

Mehrdokht Wazirpour Keshmiri

2012-07-01

Full Text Available The main purpose of this research was to compare the scale of web subject directories precision in information retrieval of technical-engineering science. Information gathering was documentary and webometric. Keywords of technical-engineering science were chosen at twenty different subjects from IEEE (Institute of Electrical and Electronics Engineers and engineering magazines that situated in sciencedirect site. These keywords are used at five subject directories Yahoo, Google, Infomine, Intute, Dmoz, that were web directories high-utilization. Usually first results in searching tools are connected to searching keywords. Because, first ten results was evaluated in every search. These assessments to consist of scale of precision, scale of error, scale retrieval items in technical-engineering categories to retrieval items entirely. The used criteria for determining the scale of precision that was according to high-utilization standards in different documents, to consist of presence of the keywords in title, appearance of keywords at the part of web retrieved pages, keywords adjacency, URL of page, page description and subject categories. Information analysis was according to Kruskal-Wallis Test and L.S.D fisher. Results revealed that there was meaningful difference about precision of web subject directories in information retrieval of technical-engineering science, Therefore this theory was confirmed.web subject directories ranked from point of precision as follows. Google, Yahoo, Intute, Dmoz, and Infomine. The scale of observed error at the first results was another criterion that was used for comparing web subject directories. In this research, Yahoo had minimum scale of error and Infomine had most of error. This research also compared the scale of retrieval items in all of categories web subject directories entirely to retrieval items in technical-engineering categories, results revealed that there was meaningful difference between them. And

Dynamic Contention Window Control Scheme in IEEE 802.11e EDCA-Based Wireless LANs

Science.gov (United States)

Abeysekera, B. A. Hirantha Sithira; Matsuda, Takahiro; Takine, Tetsuya

In the IEEE 802.11 MAC protocol, access points (APs) are given the same priority as wireless terminals in terms of acquiring the wireless link, even though they aggregate several downlink flows. This feature leads to a serious throughput degradation of downlink flows, compared with uplink flows. In this paper, we propose a dynamic contention window control scheme for the IEEE 802.11e EDCA-based wireless LANs, in order to achieve fairness between uplink and downlink TCP flows while guaranteeing QoS requirements for real-time traffic. The proposed scheme first determines the minimum contention window size in the best-effort access category at APs, based on the number of TCP flows. It then determines the minimum and maximum contention window sizes in higher priority access categories, such as voice and video, so as to guarantee QoS requirements for these real-time traffic. Note that the proposed scheme does not require any modification to the MAC protocol at wireless terminals. Through simulation experiments, we show the effectiveness of the proposed scheme.

Performance modeling of a two-tier primary-secondary network with IEEE 802.11 broadcast scheme

KAUST Repository

Khabazian, Mehdi

2011-03-01

In this paper, we study the performance of a two-tier primary-secondary network based on IEEE 802.11 broadcast scheme. We assume that a number of primary and secondary users coexist in the radio environment and share a single band. To protect the primary users\\' priority, the secondary users are allowed to contend for the channel only if they sense it idle for a certain sensing time. Considering an exponential packet inter-arrival time for the primary network, we model each primary user as an independent M/G/1 queue. Subsequently, we determine the primary users\\' average medium access delay in the presence of secondary users as well as the hybrid network\\'s throughput. Numerical results and discussions show the effects of parameters pertaining to the secondary users, such as as sensing time, packet payload size and population size, on the performance of the primary network. Furthermore, we provide simulation results which confirm the accuracy of the proposed analysis. © 2011 IEEE.

Performance modeling of a two-tier primary-secondary network with IEEE 802.11 broadcast scheme

KAUST Repository

Khabazian, Mehdi; Aissa, Sonia; El Kefi, Rania

2011-01-01

In this paper, we study the performance of a two-tier primary-secondary network based on IEEE 802.11 broadcast scheme. We assume that a number of primary and secondary users coexist in the radio environment and share a single band. To protect the primary users' priority, the secondary users are allowed to contend for the channel only if they sense it idle for a certain sensing time. Considering an exponential packet inter-arrival time for the primary network, we model each primary user as an independent M/G/1 queue. Subsequently, we determine the primary users' average medium access delay in the presence of secondary users as well as the hybrid network's throughput. Numerical results and discussions show the effects of parameters pertaining to the secondary users, such as as sensing time, packet payload size and population size, on the performance of the primary network. Furthermore, we provide simulation results which confirm the accuracy of the proposed analysis. © 2011 IEEE.

Performance Analysis of IEEE 802.11g TCM Waveforms Transmitted over a Channel with Pulse-Noise Interference

National Research Council Canada - National Science Library

Drivas, Athanasios

2007-01-01

.... The application of TCM combines FEC coding and M-ary modulation in one operation. The objective of this thesis is to investigate the performance of an orthogonal frequency-division multiplexing (OFDM) based IEEE...

Mathematical Analysis of EDCA's Performance on the Control Channel of an IEEE 802.11p WAVE Vehicular Network

Directory of Open Access Journals (Sweden)

Hussein T. Mouftah

2010-01-01

Full Text Available Wireless networks for vehicular environments are gaining increasing importance due to their ability to provide a means for stations on the roadside and radio units on board of vehicles to communicate and share safety-related information, thus reducing the probability of accidents and increasing the efficiency of the transportation system. With this goal in mind, the IEEE is currently developing the Wireless Access in Vehicular Environments (WAVE IEEE 802.11p standard. WAVE devices use the IEEE 802.11's Enhanced Distributed Channel Access (EDCA MAC protocol to compete for the transmission medium. This work proposes an analytical tool to evaluate the performance of EDCA under the specific conditions of the so-called control channel (CCH of a WAVE environment, including the particular EDCA parameter values and the fact that all safety-critical data frames are broadcasted. The protocol is modeled using Markov chains and results related to throughput, frame-error rate, buffer occupancy and delay are obtained under different traffic-load conditions. The main analysis is performed assuming that the CCH works continuously, and then an explanation is given as to the considerations that are needed to account for the fact that activity on the CCH is intermittent.

Engineering electronic states of periodic and quasiperiodic chains by buckling

Science.gov (United States)

Mukherjee, Amrita; Nandy, Atanu; Chakrabarti, Arunava

2017-07-01

The spectrum of spinless, non-interacting electrons on a linear chain that is buckled in a non-uniform, quasiperiodic manner is investigated within a tight binding formalism. We have addressed two specific cases, viz., a perfectly periodic chain wrinkled in a quasiperiodic Fibonacci pattern, and a quasiperiodic Fibonacci chain, where the buckling also takes place in a Fibonacci pattern. The buckling brings distant neighbors in the parent chain to close proximity, which is simulated by a tunnel hopping amplitude. It is seen that, in the perfectly ordered case, increasing the strength of the tunnel hopping (that is, bending the segments more) absolutely continuous density of states is retained towards the edges of the band, while the central portion becomes fragmented and host subbands of narrowing widths containing extended, current carrying states, and multiple isolated bound states formed as a result of the bending. A switching ;on; and ;off; of the electronic transmission can thus be engineered by buckling. On the other hand, in the second example of a quasiperiodic Fibonacci chain, imparting a quasiperiodic buckling is found to generate continuous subband(s) destroying the usual multifractality of the energy spectrum. We present exact results based on a real space renormalization group analysis, that is corroborated by explicit calculation of the two terminal electronic transport.

Design of Pulse Oximeter with WiFi Connectivity and Interoperability with Standard HL7 and IEEE 11073-10404:2008

Directory of Open Access Journals (Sweden)

Víctor Ochoa

2014-12-01

Full Text Available Given that health is so relevant for global productivity and competitiveness, and that the Information and Communications Technology (ICTs play an important role in all of the productivity factors, this work makes use of the ICTs in health matters proposing the to use a WiFi oximeter. This article describes the operating principles of a Pulse Oximeter (PO which is an opto-electronic non-invasive medical instrument capable of measuring changes in heart rate (HR and SpO2 at the fingertip and its upgrade to the standards; HL7 and IEEE 11073-10404:2008, its design, and its validation against the three existing devices. Variables (SpO2%, Ppm and Temperature were compared, and its performance and impact were discussed the addition of the WiFi technology allows a better communication between devices, causing a greater impact in global competiveness.

IEEE Conference Record of 1980 Fourteenth Pulse Power Modulator Symposium, 3-5 June 1980.

Science.gov (United States)

1980-01-01

Capacitor Discharges, Proc IEEE 113, p. able operation on Nova we are examing alter- 1549 (1966). nate switch gas (Ar:N 2 :SF 6 ) and electrode material...VOLTTA-KILOVOLTS PLATE VO LTAM --LOVLTS Figure 8. Constant Current Curve for the X2097U Figure 11. Constant Current Curve for the X2097V at 2000 Volt

EDITORIAL: Why we need a new journal in neural engineering

Science.gov (United States)

Durand, Dominique M.

2004-03-01

The field of neural engineering crystallizes for many engineers and scientists an area of research at the interface between neuroscience and engineering. For the last 15 years or so, the discipline of neural engineering (neuroengineering) has slowly appeared at conferences as a theme or track. The first conference devoted entirely to this area was the 1st International IEEE EMBS Conference on Neural Engineering which took place in Capri, Italy in 2003. Understanding how the brain works is considered the ultimate frontier and challenge in science. The complexity of the brain is so great that understanding even the most basic functions will require that we fully exploit all the tools currently at our disposal in science and engineering and simultaneously develop new methods of analysis. While neuroscientists and engineers from varied fields such as brain anatomy, neural development and electrophysiology have made great strides in the analysis of this complex organ, there remains a great deal yet to be uncovered. The potential for applications and remedies deriving from scientific discoveries and breakthroughs is extremely high. As a result of the growing availability of micromachining technology, research into neurotechnology has grown relatively rapidly in recent years and appears to be approaching a critical mass. For example, by understanding how neuronal circuits process and store information, we could design computers with capabilities beyond current limits. By understanding how neurons develop and grow, we could develop new technologies for spinal cord repair or central nervous system repair following neurological disorders. Moreover, discoveries related to higher-level cognitive function and consciousness could have a profound influence on how humans make sense of their surroundings and interact with each other. The ability to successfully interface the brain with external electronics would have enormous implications for our society and facilitate a

Practical electronics handbook

CERN Document Server

Sinclair, Ian R

2013-01-01

Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

Reliable and Efficient Access for Alarm-initiated and Regular M2M Traffic in IEEE 802.11ah Systems

DEFF Research Database (Denmark)

Madueño, Germán Corrales; Stefanovic, Cedomir; Popovski, Petar

2016-01-01

IEEE 802.11ah is a novel WiFi-based protocol, aiming to provide an access solution for the machine-to-machine (M2M) communications. In this paper, we propose an adaptive access mechanism that can be seamlessly incorporated into IEEE 802.11ah protocol operation and that supports all potential M2M...... reporting regimes, which are periodic, on-demand and alarm reporting. The proposed access method is based a periodically re- occurring pool of time slots, whose size is proactively determined on the basis of the reporting activity in the cell. We show that it is possible to both efficiently and reliably...

Development and results of a test program to demonstrate compliance with IEEE STD 384 and R.G. 1.75 electrical separation requirements

International Nuclear Information System (INIS)

Eckert, G.P.; Heneberry, E.F.; Walker, F.P.; Konkus, J.F.

1987-01-01

The IEEE Std 384-1974, entitled ''Criteria for Separation of Class 1E Equipment and Circuits,'' contains criteria to ensure the independence of redundant Class 1E equipment when designing electrical systems in nuclear plants. The NRC, in R.G. 1.75 Rev. 2, 1978, endorses, with comments, IEEE-384, as the means of achieving independence. One method given in IEEE-384, is that of maintaining a specified separation between components; another method utilizes a combination of separation and barriers. The standard also allows alternative methods to be used when justified by test-based analyses. This paper is a report of a test program undertaken to provide a basis for analysis in the development of alternative methods of achieving separation. The test parameters developed and used, and the results obtained, should prove useful in determining alternative methods of complying with R.G. 1.75 requirements

Impacto de mecanismos de seguridad en sensores IEEE 802.15.4

OpenAIRE

Tripp Barba, Carolina; Casademont Serra, Jordi

2009-01-01

En la actualidad son muchos los mecanismos de seguridad que el estándar IEEE 802.15.4 permite a las redes inalámbricas de sensores [1] Dicho estándar define las especificaciones de la Capa de Acceso al Medio y la Capa Física de los dispositivos inalámbricos de área personal. La última revisión corresponde al 2006. Dichas revisiones y actualizaciones son hechas por el grupo de trabajo 802.15. Sin embargo estos mecanismos consumen recursos como memoria y batería, que son...

Impact of cell load on 5GHz IEEE 802.11 WLAN

OpenAIRE

Abu-Tair, Mamoun; Bhatti, Saleem Noel

2017-01-01

We have conducted an empirical study of the latest 5GHz IEEE 802.11 wireless LAN (WLAN) variants of 802.11n (5GHz) and 802.11ac (Wave 1), under different cell load conditions. We have considered typical configurations of both protocols on a Linux testbed. Under light load,there is no clear difference between 802.11n and 802.11ac in terms of performance and energy consumption. However, in some cases of high cell load, we have found that there may be a small advantage with 802.11ac. Overall, we...

PADF RF Localization Criteria for Multi-Model Scattering Environments

Science.gov (United States)

2011-04-01

Raul Ordonez b, Atindra Mitra c aDepartment of Electrical Engineering, Louisiana Tech University, Ruston, LA 71272 bDepartment of Electrical and...21] April Johnson, Cara Rupp, Brad Wolf, Lang Hong, Atindra Mitra, “Collision-Avoidance Radar for Bicyclist and Runners,” 2010 IEEE National Aerospace and Electronics Conference, 14-16 July 2010, Dayton, Ohio

An Evaluation Methodology for the Usability and Security of Cloud-based File Sharing Technologies

Science.gov (United States)

2012-09-01

FISMA, ISO 27001 , FIPS 140-2, and ISO 270001) indicate a cloud-based service’s compliance with industry standard security controls, management and...Information Assurance IEEE Institute of Electrical and Electronics Engineers IT Information Technology ITS Insider Threat Study ISO International...effectively, efficiently and with satisfaction” (International Organization for Standardization [ ISO ], 1998). Alternately, information security

A Low Cost Implementation of an Existing Hands-on Laboratory Experiment in Electronic Engineering

Directory of Open Access Journals (Sweden)

Clement Onime

2014-10-01

Full Text Available In engineering the pedagogical content of most formative programmes includes a significant amount of practical laboratory hands-on activity designed to deliver knowledge acquisition from actual experience alongside traditional face-to-face classroom based lectures and tutorials; this hands-on aspect is not always adequately addressed by current e-learning platforms. An innovative approach to e-learning in engineering, named computer aided engineering education (CAEE is about the use of computer aids for the enhanced, interactive delivery of educational materials in different fields of engineering through two separate but related components; one for classroom and another for practical hands-on laboratory work. The component for hands-on laboratory practical work focuses on the use of mixed reality (video-based augmented reality tools on mobile devices/platforms. This paper presents the computer aided engineering education (CAEE implementation of a laboratory experiment in micro-electronics that highlights some features such as the ability to closely implement an existing laboratory based hands-on experiment with lower associated costs and the ability to conduct the experiment off-line while maintaining existing pedagogical contents and standards.

Fundamental of biomedical engineering

CERN Document Server

Sawhney, GS

2007-01-01

About the Book: A well set out textbook explains the fundamentals of biomedical engineering in the areas of biomechanics, biofluid flow, biomaterials, bioinstrumentation and use of computing in biomedical engineering. All these subjects form a basic part of an engineer''s education. The text is admirably suited to meet the needs of the students of mechanical engineering, opting for the elective of Biomedical Engineering. Coverage of bioinstrumentation, biomaterials and computing for biomedical engineers can meet the needs of the students of Electronic & Communication, Electronic & Instrumenta

A theoretical study on the performances of thermoelectric heat engine and refrigerator with two-dimensional electron reservoirs

International Nuclear Information System (INIS)

Luo, Xiaoguang; Long, Kailin; Wang, Jun; Qiu, Teng; He, Jizhou; Liu, Nian

2014-01-01

Theoretical thermoelectric nanophysics models of low-dimensional electronic heat engine and refrigerator devices, comprising two-dimensional hot and cold reservoirs and an interconnecting filtered electron transport mechanism have been established. The models were used to numerically simulate and evaluate the thermoelectric performance and energy conversion efficiencies of these low-dimensional devices, based on three different types of electron transport momentum-dependent filters, referred to herein as k x , k y , and k r filters. Assuming the Fermi-Dirac distribution of electrons, expressions for key thermoelectric performance parameters were derived for the resonant transport processes, in which the transmission of electrons has been approximated as a Lorentzian resonance function. Optimizations were carried out and the corresponding optimized design parameters have been determined, including but not limited to the universal theoretical upper bound of the efficiency at maximum power for heat engines, and the maximum coefficient of performance for refrigerators. From the results, it was determined that k r filter delivers the best thermoelectric performance, followed by the k x filter, and then the k y filter. For refrigerators with any one of three filters, an optimum range for the full width at half maximum of the transport resonance was found to be B T.

The Performance Evaluation of an IEEE 802.11 Network Containing Misbehavior Nodes under Different Backoff Algorithms

Directory of Open Access Journals (Sweden)

Trong-Minh Hoang

2017-01-01

Full Text Available Security of any wireless network is always an important issue due to its serious impacts on network performance. Practically, the IEEE 802.11 medium access control can be violated by several native or smart attacks that result in downgrading network performance. In recent years, there are several studies using analytical model to analyze medium access control (MAC layer misbehavior issue to explore this problem but they have focused on binary exponential backoff only. Moreover, a practical condition such as the freezing backoff issue is not included in the previous models. Hence, this paper presents a novel analytical model of the IEEE 802.11 MAC to thoroughly understand impacts of misbehaving node on network throughput and delay parameters. Particularly, the model can express detailed backoff algorithms so that the evaluation of the network performance under some typical attacks through numerical simulation results would be easy.

A pseudo differential Gm—C complex filter with frequency tuning for IEEE802.15.4 applications

Science.gov (United States)

Xin, Cheng; Lungui, Zhong; Haigang, Yang; Fei, Liu; Tongqiang, Gao

2011-07-01

This paper presents a CMOS Gm—C complex filter for a low-IF receiver of the IEEE 802.15.4 standard. A pseudo differential OTA with reconfigurable common mode feedback and common mode feed-forward is proposed as well as the frequency tuning method based on a relaxation oscillator. A detailed analysis of non-ideality of the OTA and the frequency tuning method is elaborated. The analysis and measurement results have shown that the center frequency of the complex filter could be tuned accurately. The chip was fabricated in a standard 0.35 μm CMOS process, with a single 3.3 V power supply. The filter consumes 2.1mA current, has a measured in-band group delay ripple of less than 0.16 μs and an IRR larger than 28 dB at 2 MHz apart, which could meet the requirements oftheIEEE802.15.4 standard.

Interoperability of medical device information and the clinical applications: an HL7 RMIM based on the ISO/IEEE 11073 DIM.

Science.gov (United States)

Yuksel, Mustafa; Dogac, Asuman

2011-07-01

Medical devices are essential to the practice of modern healthcare services. Their benefits will increase if clinical software applications can seamlessly acquire the medical device data. The need to represent medical device observations in a format that can be consumable by clinical applications has already been recognized by the industry. Yet, the solutions proposed involve bilateral mappings from the ISO/IEEE 11073 Domain Information Model (DIM) to specific message or document standards. Considering that there are many different types of clinical applications such as the electronic health record and the personal health record systems, the clinical workflows, and the clinical decision support systems each conforming to different standard interfaces, detailing a mapping mechanism for every one of them introduces significant work and, thus, limits the potential health benefits of medical devices. In this paper, to facilitate the interoperability of clinical applications and the medical device data, we use the ISO/IEEE 11073 DIM to derive an HL7 v3 Refined Message Information Model (RMIM) of the medical device domain from the HL7 v3 Reference Information Mode (RIM). This makes it possible to trace the medical device data back to a standard common denominator, that is, HL7 v3 RIM from which all the other medical domains under HL7 v3 are derived. Hence, once the medical device data are obtained in the RMIM format, it can easily be transformed into HL7-based standard interfaces through XML transformations because these interfaces all have their building blocks from the same RIM. To demonstrate this, we provide the mappings from the developed RMIM to some of the widely used HL7 v3-based standard interfaces.

Elucidating the electron transport in semiconductors via Monte Carlo simulations: an inquiry-driven learning path for engineering undergraduates

International Nuclear Information System (INIS)

Adorno, Dominique Persano; Pizzolato, Nicola; Fazio, Claudio

2015-01-01

Within the context of higher education for science or engineering undergraduates, we present an inquiry-driven learning path aimed at developing a more meaningful conceptual understanding of the electron dynamics in semiconductors in the presence of applied electric fields. The electron transport in a nondegenerate n-type indium phosphide bulk semiconductor is modelled using a multivalley Monte Carlo approach. The main characteristics of the electron dynamics are explored under different values of the driving electric field, lattice temperature and impurity density. Simulation results are presented by following a question-driven path of exploration, starting from the validation of the model and moving up to reasoned inquiries about the observed characteristics of electron dynamics. Our inquiry-driven learning path, based on numerical simulations, represents a viable example of how to integrate a traditional lecture-based teaching approach with effective learning strategies, providing science or engineering undergraduates with practical opportunities to enhance their comprehension of the physics governing the electron dynamics in semiconductors. Finally, we present a general discussion about the advantages and disadvantages of using an inquiry-based teaching approach within a learning environment based on semiconductor simulations. (paper)

Elucidating the electron transport in semiconductors via Monte Carlo simulations: an inquiry-driven learning path for engineering undergraduates

Science.gov (United States)

Persano Adorno, Dominique; Pizzolato, Nicola; Fazio, Claudio

2015-09-01

Within the context of higher education for science or engineering undergraduates, we present an inquiry-driven learning path aimed at developing a more meaningful conceptual understanding of the electron dynamics in semiconductors in the presence of applied electric fields. The electron transport in a nondegenerate n-type indium phosphide bulk semiconductor is modelled using a multivalley Monte Carlo approach. The main characteristics of the electron dynamics are explored under different values of the driving electric field, lattice temperature and impurity density. Simulation results are presented by following a question-driven path of exploration, starting from the validation of the model and moving up to reasoned inquiries about the observed characteristics of electron dynamics. Our inquiry-driven learning path, based on numerical simulations, represents a viable example of how to integrate a traditional lecture-based teaching approach with effective learning strategies, providing science or engineering undergraduates with practical opportunities to enhance their comprehension of the physics governing the electron dynamics in semiconductors. Finally, we present a general discussion about the advantages and disadvantages of using an inquiry-based teaching approach within a learning environment based on semiconductor simulations.

Oldest Packet Drop (OPD): a Buffering Mechanism for Beaconing in IEEE 802.11p VANETs

NARCIS (Netherlands)

van Eenennaam, Martijn; Hendriks, Luuk; Karagiannis, Georgios; Heijenk, Geert

2011-01-01

The IEEE 802.11p MAC technology can be used to provide connectivity for real-time vehicle control known as Cooperative Adaptive Cruise Control. Due to the real-time nature of this system, it is paramount the delay of the received information is as small as possible. This paper researches the Oldest

Interference Measurements in IEEE 802.11 Communication Links Due to Different Types of Interference Sources

NARCIS (Netherlands)

van Bloem, J.W.H.; Schiphorst, Roelof; Kluwer, Taco; Slump, Cornelis H.

2012-01-01

The number of wireless devices (smartphones, laptops, sensors) that use the 2.4 GHz ISM band is rapidly increasing. The most common communication system in this band is Wi-Fi (IEEE 802.11b/g/n). For that reason coexistence between Wi-Fi and other systems becomes more and more important. In this

"A Fiber Optic Ethernet With Inherent Migration Capability To FDDI"

Science.gov (United States)

Ferris, Kenneth D.; Chan, Tammy S.

1988-12-01

A Local Area Network (LAN) designed to a standard commercial interface, the Institute of Electrical and Electronics Engineers (IEEE) 802.3 or Ethernet, has been developed using fiber optics as the physical medium. The LAN, WhisperNet, operates in an active ring and thus has an inherent low cost migration path to a Fiber Distributed Data Interface (FDDI) implementation.

Wireless communication for control of manipulation systems

Czech Academy of Sciences Publication Activity Database

Belda, Květoslav; Rychnovský, V.; Píša, P.

2012-01-01

Roč. 22, č. 1 (2012), s. 29-41 ISSN 1230-2384 Institutional research plan: CEZ:AV0Z10750506 Keywords : distributed mechatronic system * model-based control * multi-level control * odometry * optical sensors * standard IEEE 802.15.4 * ZigBee protocol Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering http://library.utia.cas.cz/separaty/2012/AS/belda-0376476.pdf

Throughput analysis of the IEEE 802.4 token bus standard under heavy load

Science.gov (United States)

Pang, Joseph; Tobagi, Fouad

1987-01-01

It has become clear in the last few years that there is a trend towards integrated digital services. Parallel to the development of public Integrated Services Digital Network (ISDN) is service integration in the local area (e.g., a campus, a building, an aircraft). The types of services to be integrated depend very much on the specific local environment. However, applications tend to generate data traffic belonging to one of two classes. According to IEEE 802.4 terminology, the first major class of traffic is termed synchronous, such as packetized voice and data generated from other applications with real-time constraints, and the second class is called asynchronous which includes most computer data traffic such as file transfer or facsimile. The IEEE 802.4 token bus protocol which was designed to support both synchronous and asynchronous traffic is examined. The protocol is basically a timer-controlled token bus access scheme. By a suitable choice of the design parameters, it can be shown that access delay is bounded for synchronous traffic. As well, the bandwidth allocated to asynchronous traffic can be controlled. A throughput analysis of the protocol under heavy load with constant channel occupation of synchronous traffic and constant token-passing times is presented.

Qualification of engine-mounted components due to operational vibration

International Nuclear Information System (INIS)

Lee, B.J.; Bayat, A.

1994-01-01

The Emergency Diesel Generator (EDG) in a Nuclear Power Plant is considered to be an essential component of the plant for its safe operation. Failures of auxiliary components directly mounted on the EDG creates costly repairs, and compromises the engine's availability and reliability. Although IEEE-323 and Section III of the ASME code require addressing of safety-related components due to mechanically induced vibration, very few guidelines exist in the nuclear industry to show how this may be accounted for. Most engine vendors rely on the empirical experience data as the basis of their evaluation for vibration. Upgrade of engine controls, addition of monitoring components and other engine modifications require design and installation of new mechanical and electrical components to be mounted directly on the engine. This necessitates the evaluation of such components for engine-induced vibration which is considered to be one of the most severe design parameters. This paper presents a methodology to evaluate three categories of components; structural, mechanical, and electrical under engine vibration. The discussion for the characteristics and manipulation of engine vibration profile to be used for each component evaluation is also given. In addition, the suitability of analytical verses testing approaches is discussed for each category. An example application of the methodology is presented for a typical EDG which is currently undergoing major controls upgrade and monitoring modification

METHOD OF CONVERSION OF HIGH- AND MIDDLE-SPEED DIESEL ENGINES INTO GAS DIESEL ENGINES

Directory of Open Access Journals (Sweden)

Mikhail G. Shatrov

2017-12-01

Full Text Available The paper aims at the development of fuel supply and electronic control systems for boosted high- and middle-speed transport engines. A detailed analysis of different ways of converting diesel engine to operate on natural gas was carried out. The gas diesel process with minimized ignition portion of diesel fuel injected by the Common Rail (CR system was selected. Electronic engine control and modular gas feed systems which can be used both on high- and middle-speed gas diesel engines were developed. Also diesel CR fuel supply systems were developed in cooperation with the industrial partner, namely, those that can be mounted on middle-speed diesel and gas diesel engines. Electronic control and gas feed systems were perfected using modeling and engine tests. The high-speed diesel engine was converted into a gas diesel one. After perfection of the gas feed and electronic control systems, bench tests of the high-speed gas diesel engine were carried out showing a high share of diesel fuel substitution with gas, high fuel efficiency and significant decrease of NOх and СО2 emissions.

A pseudo differential Gm-C complex filter with frequency tuning for IEEE802.15.4 applications

International Nuclear Information System (INIS)

Cheng Xin; Yang Haigang; Liu Fei; Gao Tongqiang; Zhong Lungui

2011-01-01

This paper presents a CMOS G m -C complex filter for a low-IF receiver of the IEEE 802.15.4 standard. A pseudo differential OTA with reconfigurable common mode feedback and common mode feed-forward is proposed as well as the frequency tuning method based on a relaxation oscillator. A detailed analysis of non-ideality of the OTA and the frequency tuning method is elaborated. The analysis and measurement results have shown that the center frequency of the complex filter could be tuned accurately. The chip was fabricated in a standard 0.35 μm CMOS process, with a single 3.3 V power supply. The filter consumes 2.1mA current, has a measured in-band group delay ripple of less than 0.16 μs and an IRR larger than 28 dB at 2 MHz apart, which could meet the requirements oftheIEEE802.15.4 standard. (semiconductor integrated circuits)

Evaluasi Kinerja IEEE 802.11e HCCA untuk Dukungan QoS pada WLAN Menggunakan NS-2

Directory of Open Access Journals (Sweden)

Amry Daulat Gultom

2014-06-01

Full Text Available Wireless Local Area Network (WLAN digunakan oleh trafik multimedia yang seharusnya memerlukan persyaratan jaringan yang lebih baik terhadap delay, jitter dan packet losses. IEEE 802.11 Task Group E memperkenalkan perbaikan protokol MAC 802.11, yaitu Hybrid Coordination Function (HCF, yang terdiri dari dua mekanisme akses: Enhanced Distributed Channel Access (EDCA dan HCF Controlled Channel Access (HCCA yang memberikan dukungan Kualitas Layanan/Quality of Service (QoS bagi trafik multimedia. Tujuan dari penelitian ini adalah untuk memahami algoritma protokol MAC IEEE 802.11e HCCA pada jaringan WLAN, dan menganalisis kinerja protokol MAC 802.11e HCCA pada aplikasi multimedia dengan menggunakan metode simulasi pada NS-2. Metrik kinerja yang diukur adalah jitter dan throughput-nya. Hasil penelitian ini menunjukkan bahwa protokol MAC HCCA dapat memberikan jaminan QoS dibanding protokol MAC DCF, dimana jitter HCCA lebih stabil dari pada jitter DCF. Begitupula dengan throughput HCCA yang tidak berubah selama trafik berlangsung, tidak seperti pada DCF yang masih mengalami fluktuasi yang besar.

Supporting information retrieval from electronic health records: A report of University of Michigan's nine-year experience in developing and using the Electronic Medical Record Search Engine (EMERSE).

Science.gov (United States)

Hanauer, David A; Mei, Qiaozhu; Law, James; Khanna, Ritu; Zheng, Kai

2015-06-01

This paper describes the University of Michigan's nine-year experience in developing and using a full-text search engine designed to facilitate information retrieval (IR) from narrative documents stored in electronic health records (EHRs). The system, called the Electronic Medical Record Search Engine (EMERSE), functions similar to Google but is equipped with special functionalities for handling challenges unique to retrieving information from medical text. Key features that distinguish EMERSE from general-purpose search engines are discussed, with an emphasis on functions crucial to (1) improving medical IR performance and (2) assuring search quality and results consistency regardless of users' medical background, stage of training, or level of technical expertise. Since its initial deployment, EMERSE has been enthusiastically embraced by clinicians, administrators, and clinical and translational researchers. To date, the system has been used in supporting more than 750 research projects yielding 80 peer-reviewed publications. In several evaluation studies, EMERSE demonstrated very high levels of sensitivity and specificity in addition to greatly improved chart review efficiency. Increased availability of electronic data in healthcare does not automatically warrant increased availability of information. The success of EMERSE at our institution illustrates that free-text EHR search engines can be a valuable tool to help practitioners and researchers retrieve information from EHRs more effectively and efficiently, enabling critical tasks such as patient case synthesis and research data abstraction. EMERSE, available free of charge for academic use, represents a state-of-the-art medical IR tool with proven effectiveness and user acceptance. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Theory of semiconductor junction devices a textbook for electrical and electronic engineers

CERN Document Server

Leck, J H

1967-01-01

Theory of Semiconductor Junction Devices: A Textbook for Electrical and Electronic Engineers presents the simplified numerical computation of the fundamental electrical equations, specifically Poisson's and the Hall effect equations. This book provides the fundamental theory relevant for the understanding of semiconductor device theory. Comprised of 10 chapters, this book starts with an overview of the application of band theory to the special case of semiconductors, both intrinsic and extrinsic. This text then describes the electrical properties of conductivity, semiconductors, and Hall effe

Performance analysis of the IEEE 802.16e power management for the initiations of awakening

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

To increase battery life in IEEE 802.16e systems, it is essential to efficiently manage energy in mobile stations. The sleep-mode operation in power management helps to increase the life of a station by saving energy consumption. In power management, there are two important performance metrics: energy consumption and the response delay of awakening medium access control (MAC) service data unit (SDU). While in a base station (BS) initiation of awakening, the two performance metrics should be simultaneously considered, in a mobile subscriber station (MSS) initiation of awakening, the response delay is not considered because it is self-operational. There performance metrics are affected by the minimum sleep interval (Tmin), the maximum sleep interval (Tmax), and the average interarrival time of awakening MAC SDUs (TI) during sleep-mode operation. Therefore, it is imperative to evaluate the two initiations of awakening depending on TI. To reach a fuller understanding of the performance, this paper shows an analytical mode and simulations results for the standard sleep-mode operation in the IEEE 802.16e MAC.

Group-Orthogonal Code-Division Multiplex: A Physical-Layer Enhancement for IEEE 802.11n Networks

Directory of Open Access Journals (Sweden)

Felip Riera-Palou

2010-01-01

Full Text Available The new standard for wireless local area networks (WLANs, named IEEE 802.11n, has been recently released. This new norm builds upon and remains compatible with the previous WLANs standards IEEE 802.11a/g while it is able to achieve transmission rates of up to 600 Mbps. These increased data rates are mainly a consequence of two important new features: (1 multiple antenna technology at transmission and reception, and (2 optional doubling of the system bandwidth thanks to the availability of an additional 20 MHz band. This paper proposes the use of Group-Orthogonal Code Division Multiplex (GO-CDM as a means to improve the performance of the 802.11n standard by further exploiting the inherent frequency diversity. It is explained why GO-CDM synergistically matches with the two aforementioned new features and the performance gains it can offer under different configurations is illustrated. Furthermore, the effects that group-orthogonal has on key implementation issues such as channel estimation, carrier frequency offset, and peak-to-average power ratio (PAPR are also considered.

2008 Special NSREC Issue of the IEEE Transactions on Nuclear Science Comments by the Editors

Science.gov (United States)

Schwank, Jim; Buchner, Steve; Marshall, Paul; Duzellier, Sophie; Brown, Dennis; Poivey, Christian; Pease, Ron

2008-12-01

The December 2008 special issue of the IEEE Transactions on Nuclear Science contains selected papers from the 45th annual IEEE International Nuclear and Space Radiation Effects Conference (NSREC) held in Tucson, Arizona, July 14 - 18, 2008. Over 115 papers presented at the 2008 NSREC were submitted for consideration for this year's special issue. Those papers that appear in this special issue were able to successfully complete the review process before the deadline for the December issue. A few additional papers may appear in subsequent issues of the TRANSACTIONS. This publication is the premier archival journal for research on space and nuclear radiation effects in materials, devices, circuits, and systems. This distinction is the direct result of the conscientious efforts of both the authors, who present and document their work, and the reviewers, who selflessly volunteer their time and talent to help review the manuscripts. Each paper in this journal has been reviewed by experts selected by the editors for their expertise and knowledge of the particular subject areas.

Basic security measures for IEEE 802.11 wireless networks

Directory of Open Access Journals (Sweden)

Oscar P. Sarmiento

2008-05-01

Full Text Available This article presents a tutorial/discussion of three commonly-used IEEE 802.11 wireless network security standards: WEP, WPA and WPA2. A detailed analysis of the RC4 algorithm supporting WEP is presented, including its vulnera-bilities. The WPA and WPA2 encryption protocols’ most relevant aspects and technical characteristics are reviewed for a comparative analysis of the three standards in terms of the security they provide. Special attention has been paid to WEP encryption by using an educational simulation tool written in C++ Builder for facilitating the unders-tanding of this protocol at academic level. Two practical cases of wireless security configurations using Cisco net-working equipment are also presented: configuring and enabling WPA-Personal and WPA2-Personal (these being security options used by TKIP and AES, respectively.

Magnetic collimation of fast electrons in specially engineered targets irradiated by ultraintense laser pulses

International Nuclear Information System (INIS)

Cai Hongbo; Zhu Shaoping; Wu Sizhong; Chen Mo; Zhou Cangtao; He, X. T.; Yu Wei; Nagatomo, Hideo

2011-01-01

The efficient magnetic collimation of fast electron flow transporting in overdense plasmas is investigated with two-dimensional collisional particle-in-cell numerical simulations. It is found that the specially engineered targets exhibiting either high-resistivity-core-low-resistivity-cladding structure or low-density-core-high-density-cladding structure can collimate fast electrons. Two main mechanisms to generate collimating magnetic fields are found. In high-resistivity-core-low-resistivity-cladding structure targets, the magnetic field at the interfaces is generated by the gradients of the resistivity and fast electron current, while in low-density-core-high-density-cladding structure targets, the magnetic field is generated by the rapid changing of the flow velocity of the background electrons in transverse direction (perpendicular to the flow velocity) caused by the density jump. The dependences of the maximal magnetic field on the incident laser intensity and plasma density, which are studied by numerical simulations, are supported by our analytical calculations.

Real-life IT architecture design reports and their relation to IEEE Std 1471 stakeholders and concerns

NARCIS (Netherlands)

van Vliet, H.; Koning, H.

2006-01-01

Architectural designs are an important means to manage the development and deployment of information technology (IT). Much debate has been going on about a proper definition of architecture in IT and about how to describe it. In 2000, the IEEE Std 1471 proposed a model of an architecture description

[Integration of fundamental and applied medical and technical research made at the department of the biomedical systems, Moscow State Institute of Electronic Engineering].

Science.gov (United States)

Selishchev, S V

2004-01-01

The integration results of fundamental and applied medical-and-technical research made at the chair of biomedical systems, Moscow state institute of electronic engineering (technical university--MSIEE), are described in the paper. The chair is guided in its research activity by the traditions of higher education in Russia in the field of biomedical electronics and biomedical engineering. Its activities are based on the extrapolation of methods of electronic tools, computer technologies, physics, biology and medicine with due respect being paid to the requirements of practical medicine and to topical issues of research and design.

IEEE standard requirements for reliability analysis in the design and operation of safety systems for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1976-01-01

The purpose of this standard is to provide uniform, minimum acceptable requirements for the performance of reliability analyses for safety-related systems found in nuclear-power generating stations, but not to define the need for an analysis. The need for reliability analysis has been identified in other standards which expand the requirements of regulations (e.g., IEEE Std 379-1972 (ANSI N41.2-1972), ''Guide for the Application of the Single-Failure Criterion to Nuclear Power Generating Station Protection System,'' which describes the application of the single-failure criterion). IEEE Std 352-1975, ''Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Protection Systems,'' provides guidance in the application and use of reliability techniques referred to in this standard

Mathematical modeling of a radio-frequency path for IEEE 802.11ah based wireless sensor networks

Science.gov (United States)

Tyshchenko, Igor; Cherepanov, Alexander; Dmitrii, Vakhnin; Popova, Mariia

2017-09-01

This article discusses the process of creating the mathematical model of a radio-frequency path for an IEEE 802.11ah based wireless sensor networks using M atLab Simulink CAD tools. In addition, it describes occurring perturbing effects and determining the presence of a useful signal in the received mixture.

Connectivity-Based Reliable Multicast MAC Protocol for IEEE 802.11 Wireless LANs

Directory of Open Access Journals (Sweden)

Woo-Yong Choi

2009-01-01

Full Text Available We propose the efficient reliable multicast MAC protocol based on the connectivity information among the recipients. Enhancing the BMMM (Batch Mode Multicast MAC protocol, the reliable multicast MAC protocol significantly reduces the RAK (Request for ACK frame transmissions in a reasonable computational time and enhances the MAC performance. By the analytical performance analysis, the throughputs of the BMMM protocol and our proposed MAC protocol are derived. Numerical examples show that our proposed MAC protocol increases the reliable multicast MAC performance for IEEE 802.11 wireless LANs.

Distributed Fair Access Point Selection for Multi-Rate IEEE 802.11 WLANs

Science.gov (United States)

Gong, Huazhi; Nahm, Kitae; Kim, Jongwon

In IEEE 802.11 networks, the access point (AP) selection based on the strongest signal strength often results in the extremely unfair bandwidth allocation among mobile users (MUs). In this paper, we propose a distributed AP selection algorithm to achieve a fair bandwidth allocation for MUs. The proposed algorithm gradually balances the AP loads based on max-min fairness for the available multiple bit rate choices in a distributed manner. We analyze the stability and overhead of the proposed algorithm, and show the improvement of the fairness via computer simulation.

Conference Proceedings for 1997 IEEE 24th International Conference on Plasma Sciences, 19 - 22 May 1997, San Diego, California

National Research Council Canada - National Science Library

Hyman, Julius

1997-01-01

This 360 page softbound publication includes the following major sections, An invitation to ICOPS'97, Catamaran Resort Hotel Floor Pinas, Officers of the IEEE Nuclear and Plasma Sciences Society, Conference Information...

Phase engineering of monolayer transition-metal dichalcogenide through coupled electron doping and lattice deformation

International Nuclear Information System (INIS)

Ouyang, Bin; Lan, Guoqiang; Song, Jun; Guo, Yinsheng; Mi, Zetian

2015-01-01

First-principles calculations were performed to investigate the phase stability and transition within four monolayer transition-metal dichalcogenide (TMD) systems, i.e., MX 2 (M = Mo or W and X = S or Se) under coupled electron doping and lattice deformation. With the lattice distortion and electron doping density treated as state variables, the energy surfaces of different phases were computed, and the diagrams of energetically preferred phases were constructed. These diagrams assess the competition between different phases and predict conditions of phase transitions for the TMDs considered. The interplay between lattice deformation and electron doping was identified as originating from the deformation induced band shifting and band bending. Based on our findings, a potential design strategy combining an efficient electrolytic gating and a lattice straining to achieve controllable phase engineering in TMD monolayers was demonstrated

Image restoration for civil engineering structure monitoring using imaging system embedded on UAV

Science.gov (United States)

Vozel, Benoit; Dumoulin, Jean; Chehdi, Kacem

2013-04-01

Nowadays, civil engineering structures are periodically surveyed by qualified technicians (i.e. alpinist) operating visual inspection using heavy mechanical pods. This method is far to be safe, not only for civil engineering structures monitoring staff, but also for users. Due to the unceasing traffic increase, making diversions or closing lanes on bridge becomes more and more difficult. New inspection methods have to be found. One of the most promising technique is to develop inspection method using images acquired by a dedicated monitoring system operating around the civil engineering structures, without disturbing the traffic. In that context, the use of images acquired with an UAV, which fly around the structures is of particular interest. The UAV can be equipped with different vision system (digital camera, infrared sensor, video, etc.). Nonetheless, detection of small distresses on images (like cracks of 1 mm or less) depends on image quality, which is sensitive to internal parameters of the UAV (vibration modes, video exposure times, etc.) and to external parameters (turbulence, bad illumination of the scene, etc.). Though progresses were made at UAV level and at sensor level (i.e. optics), image deterioration is still an open problem. These deteriorations are mainly represented by motion blur that can be coupled with out-of-focus blur and observation noise on acquired images. In practice, deteriorations are unknown if no a priori information is available or dedicated additional instrumentation is set-up at UAV level. Image restoration processing is therefore required. This is a difficult problem [1-3] which has been intensively studied over last decades [4-12]. Image restoration can be addressed by following a blind approach or a myopic one. In both cases, it includes two processing steps that can be implemented in sequential or alternate mode. The first step carries out the identification of the blur impulse response and the second one makes use of this

Experimental Evaluation Methodology for Spacecraft Proximity Maneuvers in a Dynamic Environment

Science.gov (United States)

2017-06-01

Framework is proposed in addition to a new guidance comparison metric previously missing in the literature, which simultaneously captures the computational...addition to a new guidance comparison metric previously missing in the literature, which simultaneously captures the computational complexity and...Harmonic Potential Function HTV H-II Transfer Vehicle IDVD Inverse Dynamics in the Virtual Domain IEEE Institute of Electrical and Electronics Engineers

Music engineering

CERN Document Server

Brice, Richard

2001-01-01

Music Engineering is a hands-on guide to the practical aspects of electric and electronic music. It is both a compelling read and an essential reference guide for anyone using, choosing, designing or studying the technology of modern music. The technology and underpinning science are introduced through the real life demands of playing and recording, and illustrated with references to well known classic recordings to show how a particular effect is obtained thanks to the ingenuity of the engineer as well as the musician. In addition, an accompanying companion website containing over 50 specially chosen tracks for download, provides practical demonstrations of the effects and techniques described in the book. Written by a music enthusiast and electronic engineer, this book covers the electronics and physics of the subject as well as the more subjective aspects. The second edition includes an updated Digital section including MPEG3 and fact sheets at the end of each chapter to summarise the key electronics and s...

Electronic Engineering Notebook: A software environment for research execution, documentation and dissemination

Science.gov (United States)

Moerder, Dan

1994-01-01

The electronic engineering notebook (EEN) consists of a free form research notebook, implemented in a commercial package for distributed hypermedia, which includes utilities for graphics capture, formatting and display of LaTex constructs, and interfaces to the host operating system. The latter capability consists of an information computer-aided software engineering (CASE) tool and a means to associate executable scripts with source objects. The EEN runs on Sun and HP workstations. The EEN, in day-to-day use can be used in much the same manner as the sort of research notes most researchers keep during development of projects. Graphics can be pasted in, equations can be entered via LaTex, etc. In addition, the fact that the EEN is hypermedia permits easy management of 'context', e.g., derivations and data can contain easily formed links to other supporting derivations and data. The CASE tool also permits development and maintenance of source code directly in the notebook, with access to its derivations and data.

Latency and Jitter Analysis for IEEE 802.11e Wireless LANs

Directory of Open Access Journals (Sweden)

Sungkwan Youm

2013-01-01

Full Text Available This paper presents a numerical analysis of latency and jitter for IEEE 802.11e wireless local area networks (WLANs in a saturation condition, by using a Markov model. We use this model to explicate how the enhanced distributed coordination function (EDCF differentiates classes of service and to characterize the probability distribution of the medium access control (MAC layer packet latency and jitter, on which the quality of the voice over Internet protocol (VoIP calls is dependent. From the proposed analytic model, we can estimate the available number of nodes determining the system performance, in order to satisfy user demands on the latency and jitter.

470‐MHz–698‐MHz IEEE 802.15.4m Compliant RF CMOS Transceiver

Directory of Open Access Journals (Sweden)

Youngho Seo

2018-04-01

Full Text Available This paper proposes an IEEE 802.15.4m compliant TV white‐space orthogonal frequency‐division multiplexing (TVWS‐(OFDM radio frequency (RF transceiver that can be adopted in advanced metering infrastructures, universal remote controllers, smart factories, consumer electronics, and other areas. The proposed TVWS‐OFDM RF transceiver consists of a receiver, a transmitter, a 25% duty‐cycle local oscillator generator, and a delta‐sigma fractional‐N phase‐locked loop. In the TV band from 470 MHz to 698 MHz, the highly linear RF transmitter protects the occupied TV signals, and the high‐Q filtering RF receiver is tolerable to in‐band interferers as strong as −20 dBm at a 3‐MHz offset. The proposed TVWS‐OFDM RF transceiver is fabricated using a 0.13‐μm CMOS process, and consumes 47 mA in the Tx mode and 35 mA in the Rx mode. The fabricated chip shows a Tx average power of 0 dBm with an error‐vector‐magnitude of  3%, and a sensitivity level of −103 dBm with a packet‐error‐rate of 3%. Using the implemented TVWS‐OFDM modules, a public demonstration of electricity metering was successfully carried out.

An Adaptive Medium Access Parameter Prediction Scheme for IEEE 802.11 Real-Time Applications

Directory of Open Access Journals (Sweden)

Estefanía Coronado

2017-01-01

Full Text Available Multimedia communications have experienced an unprecedented growth due mainly to the increase in the content quality and the emergence of smart devices. The demand for these contents is tending towards wireless technologies. However, these transmissions are quite sensitive to network delays. Therefore, ensuring an optimum QoS level becomes of great importance. The IEEE 802.11e amendment was released to address the lack of QoS capabilities in the original IEEE 802.11 standard. Accordingly, the Enhanced Distributed Channel Access (EDCA function was introduced, allowing it to differentiate traffic streams through a group of Medium Access Control (MAC parameters. Although EDCA recommends a default configuration for these parameters, it has been proved that it is not optimum in many scenarios. In this work a dynamic prediction scheme for these parameters is presented. This approach ensures an appropriate traffic differentiation while maintaining compatibility with the stations without QoS support. As the APs are the only devices that use this algorithm, no changes are required to current network cards. The results show improvements in both voice and video transmissions, as well as in the QoS level of the network that the proposal achieves with regard to EDCA.

QCD on the Cell Broadband Engine

Energy Technology Data Exchange (ETDEWEB)

Meyer, Nils [Department of Physics, University of Regensburg, 93040 Regensburg (Germany)

2008-07-01

We evaluate IBM's Enhanced Cell Broadband Engine (BE) as a possible building block of a new generation of lattice QCD machines. The Enhanced Cell BE will provide full support of double precision floating-point arithmetics, including IEEE-compliant rounding. We have developed a performance model and applied it to relevant lattice QCD kernels. The performance estimates are supported by micro- and application-benchmarks that have been obtained on currently available Cell BE-based computers, such as IBM QS20 blades and PlayStation 3. The results are encouraging and show that this processor is an interesting option for lattice QCD applications. For a massively parallel machine on the basis of the Cell BE, an application-optimized network needs to be developed.

QCD on the Cell Broadband Engine

Energy Technology Data Exchange (ETDEWEB)

Meyer, Nils [Department of Physics, University of Regensburg, 93040 Regensburg (Germany)

2008-07-01

We evaluate IBM's Enhanced Cell Broadband Engine (BE) as a possible building block of a new generation of lattice QCD machines. The Enhanced Cell BE will provide full support of double precision floating-point arithmetics, including IEEE-compliant rounding. We have developed a performance model and applied it to relevant lattice QCD kernels. The performance estimates are supported by micro- and application-benchmarks that have been obtained on currently available Cell BE-based computers, such as IBM QS20 blades and PlayStation 3. The results are encouraging and show that this processor is an interesting option for lattice QCD applications. For a massively parallel machine on the basis of the Cell BE, an application-optimized network needs to be developed.

Vispubdata.org: A Metadata Collection About IEEE Visualization (VIS) Publications.

Science.gov (United States)

Isenberg, Petra; Heimerl, Florian; Koch, Steffen; Isenberg, Tobias; Xu, Panpan; Stolper, Charles D; Sedlmair, Michael; Chen, Jian; Moller, Torsten; Stasko, John

2017-09-01

We have created and made available to all a dataset with information about every paper that has appeared at the IEEE Visualization (VIS) set of conferences: InfoVis, SciVis, VAST, and Vis. The information about each paper includes its title, abstract, authors, and citations to other papers in the conference series, among many other attributes. This article describes the motivation for creating the dataset, as well as our process of coalescing and cleaning the data, and a set of three visualizations we created to facilitate exploration of the data. This data is meant to be useful to the broad data visualization community to help understand the evolution of the field and as an example document collection for text data visualization research.

Simple Adaptive Single Differential Coherence Detection of BPSK Signals in IEEE 802.15.4 Wireless Sensor Networks.

Science.gov (United States)

Zhang, Gaoyuan; Wen, Hong; Wang, Longye; Xie, Ping; Song, Liang; Tang, Jie; Liao, Runfa

2017-12-26

In this paper, we propose an adaptive single differential coherent detection (SDCD) scheme for the binary phase shift keying (BPSK) signals in IEEE 802.15.4 Wireless Sensor Networks (WSNs). In particular, the residual carrier frequency offset effect (CFOE) for differential detection is adaptively estimated, with only linear operation, according to the changing channel conditions. It was found that the carrier frequency offset (CFO) and chip signal-to-noise ratio (SNR) conditions do not need a priori knowledge. This partly benefits from that the combination of the trigonometric approximation sin - 1 ( x ) ≈ x and a useful assumption, namely, the asymptotic or high chip SNR, is considered for simplification of the full estimation scheme. Simulation results demonstrate that the proposed algorithm can achieve an accurate estimation and the detection performance can completely meet the requirement of the IEEE 802.15.4 standard, although with a little loss of reliability and robustness as compared with the conventional optimal single-symbol detector.

Improvement of diesel engine performance by hydraulically powered electronic control (mechatronics) system. Hakuyo diesel kikan no mechatronics system ni yoru seino kojo

Energy Technology Data Exchange (ETDEWEB)

Sonoda, K.; Nakamura, Y.; Kajima, T.; Sato, S.; Fujii, T.; Tobe, Y. (Kawasaki Heavy Industries, Ltd., Tokyo (Japan))

1992-07-20

This paper describes new hydraulically-actuated mechanisms for both fuel injection and inlet/exhaust valve operation of diesel engines through solenoid valves, which obviate the conventional cam-driven system. These mechanisms were integrated with an electronic control unit also developed in this study and they were mounted as a mechatronics system'' on a power-increased single-cylinder engine. This mechatronics system was mainly composed of an injection control. boost and accumulation component, an inlet and exhaust valve control component, a solenoid valve, an electronic control equipment, a hydraulic power unit, and a maneuvering unit. The verification test was carried out for the improvement of diesel engine performance by the hydraulically powered mechatronics system. As a result, it was proved not only that these mechanisms provide stable operating characteristics over a wide range of conditions, but also that the electronic control system allows accurate, smooth response. 3 refs., 23 figs., 2 tabs.

BabelFish-Tools for IEEE C37.118.2-compliant real-time synchrophasor data mediation

Science.gov (United States)

Almas, M. S.; Vanfretti, L.; Baudette, M.

BabelFish (BF) is a real-time data mediator for development and fast prototyping of synchrophasor applications. BF is compliant with the synchrophasor data transmission IEEE Std C37.118.2-2011. BF establishes a TCP/IP connection with any Phasor Measurement Unit (PMU) or Phasor Data Concentrator (PDC) stream and parses the IEEE Std C37.118.2-2011 frames in real-time to provide access to raw numerical data in the LabVIEW environment. Furthermore, BF allows the user to select "data-of-interest" and transmit it to either a local or remote application using the User Datagram Protocol (UDP) in order to support both unicast and multicast communication. In the power systems Wide Area Monitoring Protection and Control (WAMPAC) domain, BF provides the first Free/Libre and Open Source Software (FLOSS) for the purpose of giving the users tools for fast prototyping of new applications processing PMU measurements in their chosen environment, thus liberating them of time consuming synchrophasor data handling and allowing them to develop applications in a modular fashion, without a need of a large and monolithic synchrophasor software environment.

ANÁLISE DE DESEMPENHO EM REDES IEEE 802.3 APLICADO PARA SISTEMA DE TEMPO REAL

Directory of Open Access Journals (Sweden)

Ricardo Alexsandro de Medeiros Valentim

2011-06-01

Full Text Available A tecnologia Ethernet domina o mercado de rede local de computadores. No entanto, não foi estabelecida como uma tecnologia para automação industrial, onde o determinismo procura os requisitos com um desempenho de tempo real. Muitas soluções têm sido propostas para resolver o problema do determinismo não, que se baseiam principalmente no TDMA (acesso múltiplo por divisão de tempo, passagem de token e mestre-escravo. É neste contexto que este trabalho é realizado, através de medidas de desempenho em redes de comunicação que utilizam o padrão IEEE 802.3, observando o comportamento destas redes, quando submetidos a diferentes cenários de sobrecarga. Para isso, as variações foram aprovadas em ambiente de teste, que será baseado em Shared Ethernet (Hub, Ethernet e Ethernet Switch com prioridade (IEEE 802.1Q. Desta forma, é possível indicar quais os dispositivos analisados pelos testes de desempenho demonstrado um comportamento mais adequado para suportar as aplicações com requisitos de tempo real.

Engineering Mixed Ionic Electronic Conduction in La 0.8 Sr 0.2 MnO 3+ δ Nanostructures through Fast Grain Boundary Oxygen Diffusivity

KAUST Repository

Saranya, Aruppukottai M.; Pla, Dolors; Morata, Alex; Cavallaro, Andrea; Canales-Vá zquez, Jesú s; Kilner, John A.; Burriel, Mó nica; Tarancó n, Albert

2015-01-01

to implement in nanostructures. Here, an artificial mixed ionic electronic conducting oxide is fabricated by grain boundary (GB) engineering thin films of La0.8Sr0.2MnO3+δ. This electronic conductor is converted into a good mixed ionic electronic conductor

Joint Services Electronics Program. Appendix

Science.gov (United States)

1992-11-01

R.E. Kleinman, Electromagnetic and (Raleigh- Ritz ), Galerkins method, and the method of Acoustic Scattering by Simple Shapes, J.J. Bowman, least...71 C. Namislo, "Analysis of mobile radio slotted ALOHA networks," IEEE the M. Barry Carlton Award for best paper from the IEEE Aerospace and Tram

Low-cost RAU with Optical Power Supply Used in a Hybrid RoF IEEE 802.11 Network

Science.gov (United States)

Kowalczyk, M.; Siuzdak, J.

2014-09-01

The paper presents design and implementation of a low-cost RAU (Remote Antenna Unit) device. It was designed to work in a hybrid Wi-Fi/optical network based on the IEEE 802.11b/g standard. An unique feature of the device is the possibility of optical power supply.

Open Data for Global Multimodal Land Use Classification: Outcome of the 2017 IEEE GRSS Data Fusion Contest

NARCIS (Netherlands)

Yokoya, Naoto; Ghamisi, Pedram; Xia, Junshi; Sukhanov, Sergey; Heremans, Roel; Tankoyeu, Ivan; Bechtel, Benjamin; Saux, Le Bertrand; Moser, Gabriele; Tuia, Devis

2018-01-01

In this paper, we present the scientific outcomes of the 2017 Data Fusion Contest organized by the Image Analysis and Data Fusion Technical Committee of the IEEE Geoscience and Remote Sensing Society. The 2017 Contest was aimed at addressing the problem of local climate zones classification based on

INCLUSIÓN DE CORRELACIONES TEMPORALES CON DEPENDENCIA A LARGO PLAZO Y PATRONES AUTOSIMILARES EN MODELOS DE REDES IEEE 802.3 INCLUSION OF LONG-RANGE-DEPENDENT TEMPORARY CORRELATIONS AND SELF-SIMILAR PATTERNS IN IEEE 802.3 NETWORKS MODELS

Directory of Open Access Journals (Sweden)

Ginno Millán Naveas

2010-04-01

Full Text Available En este trabajo se presentan los fundamentos de un proyecto de investigación sobre el modelado de redes de computadoras con mecanismo de control de acceso al medio, según el estándar IEEE 802.3-2005, empleando los postulados de la teoría de conjuntos autosimilares para establecer el nivel de impacto que poseen las correlaciones temporales con dependencia de largo alcance sobre el rendimiento de tales redes. Se postula una nueva forma de estimar grados de autosimilaridad basada en una variación del estimador de Whittle.The foundation of a research project about a model of computer networks with media access control mechanism based on the IEEE standard 802.3-2005 is presented. The model draws from the theory of self-similar sets for establishing the impact level that the long-range-dependent temporary correlations have on the performance of such networks. A new method for the estimation of self-similar levels based on a variation of the Whittle estimator is postulated.

Implementation and use of cloud-based electronic lab notebook in a bioprocess engineering teaching laboratory.

Science.gov (United States)

Riley, Erin M; Hattaway, Holly Z; Felse, P Arthur

2017-01-01

Electronic lab notebooks (ELNs) are better equipped than paper lab notebooks (PLNs) to handle present-day life science and engineering experiments that generate large data sets and require high levels of data integrity. But limited training and a lack of workforce with ELN knowledge have restricted the use of ELN in academic and industry research laboratories which still rely on cumbersome PLNs for recordkeeping. We used LabArchives, a cloud-based ELN in our bioprocess engineering lab course to train students in electronic record keeping, good documentation practices (GDPs), and data integrity. Implementation of ELN in the bioprocess engineering lab course, an analysis of user experiences, and our development actions to improve ELN training are presented here. ELN improved pedagogy and learning outcomes of the lab course through stream lined workflow, quick data recording and archiving, and enhanced data sharing and collaboration. It also enabled superior data integrity, simplified information exchange, and allowed real-time and remote monitoring of experiments. Several attributes related to positive user experiences of ELN improved between the two subsequent years in which ELN was offered. Student responses also indicate that ELN is better than PLN for compliance. We demonstrated that ELN can be successfully implemented in a lab course with significant benefits to pedagogy, GDP training, and data integrity. The methods and processes presented here for ELN implementation can be adapted to many types of laboratory experiments.

Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

Science.gov (United States)

Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

2011-01-01

This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

Analysis of Radio communication solutions in small and isolated communities under the IEEE 802.22 standard

OpenAIRE

Arroyo Arzubi, Alejandro; Castro Lechtaler, Antonio; Foti, Antonio Roberto; Fusario, Rubén J.; García Guibout, Jorge; Sens, Lorena

2013-01-01

In recent years the use of wireless communications has increased significantly. Rural communities without cable network communication have found a solution in wireless technologies. Based on previous fieldwork, this paper analyzes software development of integration based technologies for communication equipment. It focuses on the feasibility of the IEEE 802.22 standard as a solution to the wireless problem.

Newnes electronics assembly pocket book

CERN Document Server

Brindley, Keith

2013-01-01

Produced in association with the Engineering Training Authority with contributions from dozens of people in the electronics industry. The material covers common skills in electrical and electronic engineering and concentrates mainly on wiring and assembly. 'Newnes Electronics Assembly Pocket Book' is for electronics technicians, students and apprentices.

A time-based admission control mechanism for IEEE 802.11 ad Hoc networks

OpenAIRE

Costa, Luís Henrique M. K.; Cerveira, Carlos Rodrigo

2006-01-01

This paper presents a time-based admission control mechanism (TAC) for IEEE 802.11 ad hoc networks. The proposed mechanism was adapted to the QoS AODV routing protocol, which takes the quality of service requirements of the data flow into account in the route discovery process. TAC-AODV estimates the idle time of the physical medium based on the frames listened. The incoming traffic is admitted according to the offered load as well as the intra-flow interference, calculated based on the numbe...

The Nanophysics of Electron Emission and Breakdown for High Power Microwave Source

Science.gov (United States)

2009-12-21

coaxial anode/collector. 3.1.2. Formation of  plasma  filaments during w‐band microwave breakdown  Regular, two-dimensional plasma ...Injection Gun ," IEEE Trans. Elec. Devices (May, 2005). 2. Booske, John H., “ Plasma physics and related challenges of millimeter-to-terahertz and...high power microwave (HPM) device technologies by establishing new physical understanding of electron emission/absorption and plasma breakdown

A broadcast engineering tutorial for non-engineers

CERN Document Server

Pizzi, Skip

2014-01-01

A Broadcast Engineering Tutorial for Non-Engineers is the leading publication on the basics of broadcast technology. Whether you are new to the industry or do not have an engineering background, this book will give you a comprehensive primer of television, radio, and digital media relating to broadcast-it is your guide to understanding the technical world of radio and television broadcast engineering. It covers all the important topics such as DTV, IBOC, HD, standards, video servers, editing, electronic newsrooms, and more.

Engineering design of the interaction waveguide for high-power accelerator-driven microwave free-electron lasers

International Nuclear Information System (INIS)

Hopkins, D.B.; Clay, H.W.; Stallard, B.W.; Throop, A.L.; Listvinsky, G.; Makowski, M.A.

1989-01-01

Linear induction accelerators (LIAs) operating at beam energies of a few million electron volts and currents of a few thousand amperes are suitable drivers for free-electron lasers (FELs). Such lasers are capable of producing gigawatts of peak power and megawatts of average power at microwave frequencies. Such devices are being studied as possible power sources for future high-gradient accelerators and are being constructed for plasma heating applications. At high power levels, the engineering design of the interaction waveguide presents a challenge. This paper discusses several concerns, including electrical breakdown and metal fatigue limits, choice of material, and choice of operating propagation mode. 13 refs., 3 figs

Complexity Measure for the Prototype System Description Language (PSDL)

Science.gov (United States)

2002-06-01

Albrecht, A. and Gaffney , J., Software Function Source Lines of Code and Development Effort Prediction, IEEE Transactions on Software Engineering...Through Meausrement”; Proceedings of the IEEE, Vol. 77, No. 4, April 89. Schach, Stephen, R., Software Engineering, Second Edition, IRWIN, Burr Ridge

Self-Coexistence among IEEE 802.22 Networks: Distributed Allocation of Power and Channel.

Science.gov (United States)

Sakin, Sayef Azad; Razzaque, Md Abdur; Hassan, Mohammad Mehedi; Alamri, Atif; Tran, Nguyen H; Fortino, Giancarlo

2017-12-07

Ensuring self-coexistence among IEEE 802.22 networks is a challenging problem owing to opportunistic access of incumbent-free radio resources by users in co-located networks. In this study, we propose a fully-distributed non-cooperative approach to ensure self-coexistence in downlink channels of IEEE 802.22 networks. We formulate the self-coexistence problem as a mixed-integer non-linear optimization problem for maximizing the network data rate, which is an NP-hard one. This work explores a sub-optimal solution by dividing the optimization problem into downlink channel allocation and power assignment sub-problems. Considering fairness, quality of service and minimum interference for customer-premises-equipment, we also develop a greedy algorithm for channel allocation and a non-cooperative game-theoretic framework for near-optimal power allocation. The base stations of networks are treated as players in a game, where they try to increase spectrum utilization by controlling power and reaching a Nash equilibrium point. We further develop a utility function for the game to increase the data rate by minimizing the transmission power and, subsequently, the interference from neighboring networks. A theoretical proof of the uniqueness and existence of the Nash equilibrium has been presented. Performance improvements in terms of data-rate with a degree of fairness compared to a cooperative branch-and-bound-based algorithm and a non-cooperative greedy approach have been shown through simulation studies.

Self-Coexistence among IEEE 802.22 Networks: Distributed Allocation of Power and Channel

Directory of Open Access Journals (Sweden)

Sayef Azad Sakin

2017-12-01

Full Text Available Ensuring self-coexistence among IEEE 802.22 networks is a challenging problem owing to opportunistic access of incumbent-free radio resources by users in co-located networks. In this study, we propose a fully-distributed non-cooperative approach to ensure self-coexistence in downlink channels of IEEE 802.22 networks. We formulate the self-coexistence problem as a mixed-integer non-linear optimization problem for maximizing the network data rate, which is an NP-hard one. This work explores a sub-optimal solution by dividing the optimization problem into downlink channel allocation and power assignment sub-problems. Considering fairness, quality of service and minimum interference for customer-premises-equipment, we also develop a greedy algorithm for channel allocation and a non-cooperative game-theoretic framework for near-optimal power allocation. The base stations of networks are treated as players in a game, where they try to increase spectrum utilization by controlling power and reaching a Nash equilibrium point. We further develop a utility function for the game to increase the data rate by minimizing the transmission power and, subsequently, the interference from neighboring networks. A theoretical proof of the uniqueness and existence of the Nash equilibrium has been presented. Performance improvements in terms of data-rate with a degree of fairness compared to a cooperative branch-and-bound-based algorithm and a non-cooperative greedy approach have been shown through simulation studies.

Organic High Electron Mobility Transistors Realized by 2D Electron Gas.

Science.gov (United States)

Zhang, Panlong; Wang, Haibo; Yan, Donghang

2017-09-01

A key breakthrough in inorganic modern electronics is the energy-band engineering that plays important role to improve device performance or develop novel functional devices. A typical application is high electron mobility transistors (HEMTs), which utilizes 2D electron gas (2DEG) as transport channel and exhibits very high electron mobility over traditional field-effect transistors (FETs). Recently, organic electronics have made very rapid progress and the band transport model is demonstrated to be more suitable for explaining carrier behavior in high-mobility crystalline organic materials. Therefore, there emerges a chance for applying energy-band engineering in organic semiconductors to tailor their optoelectronic properties. Here, the idea of energy-band engineering is introduced and a novel device configuration is constructed, i.e., using quantum well structures as active layers in organic FETs, to realize organic 2DEG. Under the control of gate voltage, electron carriers are accumulated and confined at quantized energy levels, and show efficient 2D transport. The electron mobility is up to 10 cm 2 V -1 s -1 , and the operation mechanisms of organic HEMTs are also argued. Our results demonstrate the validity of tailoring optoelectronic properties of organic semiconductors by energy-band engineering, offering a promising way for the step forward of organic electronics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Proceedings of the IEEE Machine Learning for Signal Processing XVII

DEFF Research Database (Denmark)

The seventeenth of a series of workshops sponsored by the IEEE Signal Processing Society and organized by the Machine Learning for Signal Processing Technical Committee (MLSP-TC). The field of machine learning has matured considerably in both methodology and real-world application domains and has...... become particularly important for solution of problems in signal processing. As reflected in this collection, machine learning for signal processing combines many ideas from adaptive signal/image processing, learning theory and models, and statistics in order to solve complex real-world signal processing......, and two papers from the winners of the Data Analysis Competition. The program included papers in the following areas: genomic signal processing, pattern recognition and classification, image and video processing, blind signal processing, models, learning algorithms, and applications of machine learning...

Current Solutions: Recent Experience in Interconnecting Distributed Energy Resources

Energy Technology Data Exchange (ETDEWEB)

Johnson, M.

2003-09-01

This report catalogues selected real-world technical experiences of utilities and customers that have interconnected distributed energy assets with the electric grid. This study was initiated to assess the actual technical practices for interconnecting distributed generation and had a particular focus on the technical issues covered under the Institute of Electrical and Electronics Engineers (IEEE) 1547(TM) Standard for Interconnecting Distributed Resources With Electric Power Systems.

Human-Robot Interaction Literature Review

Science.gov (United States)

2012-03-01

electrical and electronics engineering, telecommunications and other technical fields. (IEEE, 2007) NTIS – National Technical Information Service NTIS...of a task is automated. However, performance recovery is much lower if automation fails and the human is excluded from the implementation of the task...Vincenzi, D.A. (2009). Effects of Systems Automation Management STartegies and Milti-mission Operator-to-vehicle Ratio on Operator Performance in

Project based education as motivation factor in undergraduate program in Electronics at Copenhagen University College of Engineering

DEFF Research Database (Denmark)

Friesel, Anna

2012-01-01

This paper summarizes the contents of our experience with project based courses and team work in the undergraduate program in Electronics. The main points of our program are described in this paper, where the leading idea is to combine theory with practical engineering projects. Our students work...

AVSS 2007: IEEE International Conference onAdvanced Video and Signal based Surveillance, London, UK, September 2007

DEFF Research Database (Denmark)

Fihl, Preben

This technical report will cover the participation in the IEEE International Conference on Advanced Video and Signal based Surveillance in September 2007. The report will give a concise description of the most relevant topics presented at the conference, focusing on the work related to the HERMES...... project and human motion and action recognition. Our contribution to the conference will also be described....

IEEE conference record -- Abstracts

International Nuclear Information System (INIS)

Anon.

1994-01-01

This conference covers the following areas: computational plasma physics; vacuum electronic; basic phenomena in fully ionized plasmas; plasma, electron, and ion sources; environmental/energy issues in plasma science; space plasmas; plasma processing; ball lightning/spherical plasma configurations; plasma processing; fast wave devices; magnetic fusion; basic phenomena in partially ionized plasma; dense plasma focus; plasma diagnostics; basic phenomena in weakly ionized gases; fast opening switches; MHD; fast z-pinches and x-ray lasers; intense ion and electron beams; laser-produced plasmas; microwave plasma interactions; EM and ETH launchers; solid state plasmas and switches; intense beam microwaves; and plasmas for lighting. Separate abstracts were prepared for 416 papers in this conference

Future trends in agricultural engineering.

NARCIS (Netherlands)

Jongebreur, A.A.; Speelman, L.

1997-01-01

Beside traditional mechanical engineering, other engineering branches such as electronics, control engineering and physics play their specific role within the agricultural engineering field. Agricultural engineering has affected and stimulated major changes in agriculture. In the last decades

Molecular modeling and multiscaling issues for electronic material applications

CERN Document Server

Iwamoto, Nancy; Yuen, Matthew; Fan, Haibo

Volume 1 : Molecular Modeling and Multiscaling Issues for Electronic Material Applications provides a snapshot on the progression of molecular modeling in the electronics industry and how molecular modeling is currently being used to understand material performance to solve relevant issues in this field. This book is intended to introduce the reader to the evolving role of molecular modeling, especially seen through the eyes of the IEEE community involved in material modeling for electronic applications.  Part I presents  the role that quantum mechanics can play in performance prediction, such as properties dependent upon electronic structure, but also shows examples how molecular models may be used in performance diagnostics, especially when chemistry is part of the performance issue.  Part II gives examples of large-scale atomistic methods in material failure and shows several examples of transitioning between grain boundary simulations (on the atomistic level)and large-scale models including an example ...

On Correlated Failures in Survivable Storage Systems

Science.gov (United States)

2002-05-01

Littlewood, D.R. Miller, “Conceptual modeling of coincident failures in multiversion software”, IEEE Transactions on Software Engineering, Volume: 15 Issue...Recovery in Multiversion Software”. IEEE Transaction on Software Engineering, Vol. 16 No.3, March 1990 [Plank1997] J. Plank “A tutorial on Reed-Solomon

Virtualization of AEGIS: A Study of the Feasibility of Applying Open Architecture Technology to the Surface Navy’s Most Complex Automated Weapon System

Science.gov (United States)

2011-09-01

diagnostics system. Aerospace and Electronic Systems Magazine, IEEE , 9(2), 40–45. Current version released August 2002 in IEEE Xplore . doi: 10.1109...Cramming more components onto integrated circuits. Electronics, 114–117. Reprinted January 1998 in Proceedings of the IEEE , 86(1), 82–85. doi: S 0018

First-year Engineering Education with the Creative Electrical Engineering Laboratory

Science.gov (United States)

Tsukamoto, Takehiko; Sugito, Tetsumasa; Ozeki, Osamu; Ushiroda, Sumio

The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects. We introduced the creative electrical engineering laboratory into the first-year engineering education since 1998. The laboratory concentrates on the practice exercise. The final questionnaire of students showed that our first-year education is very effective to promote students motivation and their scholastic ability in engineering.

Nanoparticle Contrast Agents for Enhanced Microwave Imaging and Thermal Treatment of Breast Cancer

Science.gov (United States)

2010-10-01

31 UTC from IEEE Xplore . Restrictions apply. 1832 IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, VOL. 57, NO. 8, AUGUST 2010 In this paper, we report...the same Authorized licensed use limited to: University of Wisconsin. Downloaded on July 20,2010 at 13:52:31 UTC from IEEE Xplore . Restrictions apply...Authorized licensed use limited to: University of Wisconsin. Downloaded on July 20,2010 at 13:52:31 UTC from IEEE Xplore . Restrictions apply. 1834 IEEE

Optimising the cam profile of an electronic unit pump for a heavy-duty diesel engine

International Nuclear Information System (INIS)

Qiu, Tao; Dai, Hefei; Lei, Yan; Cao, Chunlei; Li, Xuchu

2015-01-01

For a fuel system with a tangent cam or a constant-velocity cam, the peak injection pressure continues to rise as the injection duration increases, but overly high peak pressures induce mechanical loads and wear, limiting the maximum engine speed and injection quantity. To improve the performance of an EUP (Electronic Unit Pump) fuel system for heavy-duty diesel engines, this work proposes a new pump cam, namely the constant-pressure cam. It helps the EUP run at a higher speed and deliver larger fuel quantities while maintaining a constant peak injection pressure, which improves the power of the heavy-duty diesel engine. A model based on the EUP was built to determine the three constraints for optimising the constant-pressure cam: 1) the pump pressure should equal the nozzle pressure; 2) the cam speed should decrease with the increase in the injection duration; and 3) the cam acceleration gradient should be zero. An EUP system was tested with the tangent cam and the optimised cam under different conditions. The experimental results show that the EUP system with the optimised cam delivers more injection quantity and runs at higher engine speeds while maintaining the same peak pressure as the tangent cam. - Highlights: • We propose a constant-pressure cam to improve the power of heavy-duty diesel engine. • We deduce three constraints for the CP (constant-peak pressure) cam based on a model. • The EUP system with the new cam works well under higher engine speed. • The peak pressure of the constant-pressure cam fuel system maintains high

Flat-panel electronic displays: a triumph of physics, chemistry and engineering.

Science.gov (United States)

Hilsum, Cyril

2010-03-13

This paper describes the history and science behind the development of modern flat-panel displays, and assesses future trends. Electronic displays are an important feature of modern life. For many years the cathode ray tube, an engineering marvel, was universal, but its shape was cumbersome and its operating voltage too high. The need for a flat-panel display, working at a low voltage, became imperative, and much research has been applied to this need. Any versatile flat-panel display will exploit an electro-optical effect, a transparent conductor and an addressing system to deliver data locally. The first need is to convert an electrical signal into a visible change. Two methods are available, the first giving emission of light, the second modulating ambient illumination. The most useful light-emitting media are semiconductors, historically exploiting III-V or II-VI compounds, but more recently organic or polymer semiconductors. Another possible effect uses gas plasma discharges. The modulating, or subtractive, effects that have been studied include liquid crystals, electrophoresis, electrowetting and electrochromism. A transparent conductor makes it possible to apply a voltage to an extended area while observing the results. The design is a compromise, since the free electrons that carry current also absorb light. The first materials used were metals, but some semiconductors, when heavily doped, give a better balance, with high transmission for a low resistance. Delivering data unambiguously to a million or so picture elements across the display area is no easy task. The preferred solution is an amorphous silicon thin-film transistor deposited at each cross-point in an X-Y matrix. Success in these endeavours has led to many applications for flat-panel displays, including television, flexible displays, electronic paper, electronic books and advertising signs.

Technician Career Opportunities in Engineering Technology.

Science.gov (United States)

Engineers' Council for Professional Development, New York, NY.

Career opportunities for engineering technicians are available in the technologies relating to air conditioning, heating, and refrigeration, aviation and aerospace, building construction, chemical engineering, civil engineering, electrical engineering, electronics, industrial engineering, instrumentation, internal combustion engines, mechanical…

Modeling of Wi-Fi IEEE 802.11ac Offloading Performance For 1000x Capacity Expansion of LTE-Advanced

DEFF Research Database (Denmark)

Hu, Liang; Sanchez, Maria Laura Luque; Maternia, Michael

2013-01-01

This paper studies indoor Wi-Fi IEEE 802.11ac deployment as a capacity expansion solution of LTE-A (Long Term Evolution-Advanced) network to achieve 1000 times higher capacity. Besides increasing the traffic volume by a factor of x1000, we also increase the minimum target user data rate to 10Mbit...

Open-source implementation of an ad-hoc IEEE802.11a/g/p software-defined radio on low-power and low-cost general purpose processors

Directory of Open Access Journals (Sweden)

S. Ciccia

2017-12-01

Full Text Available This work proposes a low-cost and low-power software-defined radio open-source platform with IEEE 802.11 a/g/p wireless communication capability. A state-of-the-art version of the IEEE 802.11 a/g/p software for GNU Radio (a free and open-source software development framework is available online, but we show here that its computational complexity prevents operations in low-power general purpose processors, even at throughputs below the standard. We therefore propose an evolution of this software that achieves a faster and lighter IEEE 802.11 a/g/p transmitter and receiver, suitable for low-power general purpose processors, for which GNU Radio provides very limited support; we discuss and describe the software radio processing structuring that is necessary to achieve the goal, providing a review of signal processing techniques. In particular, we emphasize the advanced reduced-instruction set (RISC machine (ARM study case, for which we also optimize some of the processing libraries. The presented software will remain open-source.

Regulatory Barriers Blocking Standardization of Interoperability

OpenAIRE

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-01-01

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the ad...

Proceeding of the ACM/IEEE-CS Joint Conference on Digital Libraries (1st, Roanoke, Virginia, June 24-28, 2001).

Science.gov (United States)

Association for Computing Machinery, New York, NY.

Papers in this Proceedings of the ACM/IEEE-CS Joint Conference on Digital Libraries (Roanoke, Virginia, June 24-28, 2001) discuss: automatic genre analysis; text categorization; automated name authority control; automatic event generation; linked active content; designing e-books for legal research; metadata harvesting; mapping the…

Gradient ascent pulse engineering approach to CNOT gates in donor electron spin quantum computing

International Nuclear Information System (INIS)

Tsai, D.-B.; Goan, H.-S.

2008-01-01

In this paper, we demonstrate how gradient ascent pulse engineering (GRAPE) optimal control methods can be implemented on donor electron spin qubits in semiconductors with an architecture complementary to the original Kane's proposal. We focus on the high fidelity controlled-NOT (CNOT) gate and we explicitly find the digitized control sequences for a controlled-NOT gate by optimizing its fidelity using the effective, reduced donor electron spin Hamiltonian with external controls over the hyperfine A and exchange J interactions. We then simulate the CNOT-gate sequence with the full spin Hamiltonian and find that it has an error of 10 -6 that is below the error threshold of 10 -4 required for fault-tolerant quantum computation. Also the CNOT gate operation time of 100 ns is 3 times faster than 297 ns of the proposed global control scheme.

Accurate and Integrated Localization System for Indoor Environments Based on IEEE 802.11 Round-Trip Time Measurements

Directory of Open Access Journals (Sweden)

Alfonso Bahillo

2010-01-01

Full Text Available The presence of (Non line of Sight NLOS propagation paths has been considered the main drawback for localization schemes to estimate the position of a (Mobile User MU in an indoor environment. This paper presents a comprehensive wireless localization system based on (Round-Trip Time RTT measurements in an unmodified IEEE 802.11 wireless network. It overcomes the NLOS impairment by implementing the (Prior NLOS Measurements Correction PNMC technique. At first, the RTT measurements are performed with a novel electronic circuit avoiding the need for time synchronization between wireless nodes. At second, the distance between the MU and each reference device is estimated by using a simple linear regression function that best relates the RTT to the distance in (Line of Sight LOS. Assuming that LOS in an indoor environment is a simplification of reality hence, the PNMC technique is applied to correct the NLOS effect. At third, assuming known the position of the reference devices, a multilateration technique is implemented to obtain the MU position. Finally, the localization system coupled with measurements demonstrates that the system outperforms the conventional time-based indoor localization schemes without using any tracking technique such as Kalman filters or Bayesian methods.

A Secure Simplification of the PKMv2 Protocol in IEEE 802.16e-2005

DEFF Research Database (Denmark)

Yuksel, Ender; Nielson, Hanne Riis; Nielsen, Christoffer Rosenkilde

2007-01-01

Static analysis is successfully used for automatically validating security properties of classical cryptographic protocols. In this paper, we shall employ the same technique to a modern security protocol for wireless networks, namely the latest version of the Privacy and Key Management protocol...... for IEEE 802.16e, PKMv2. This protocol seems to have an exaggerated mixture of security features. Thus, we iteratively investigate which components are necessary for upholding the security properties and which can be omitted safely. This approach is based on the LySa process calculus and employs...

Adaptive rate selection scheme for video transmission to resolve IEEE 802.11 performance anomaly

Science.gov (United States)

Tang, Guijin; Zhu, Xiuchang

2011-10-01

Multi-rate transmission may lead to performance anomaly in an IEEE 802.11 network. It will decrease the throughputs of all the higher rate stations. This paper proposes an adaptive rate selection scheme for video service when performance anomaly occurs. Considering that video has the characteristic of tolerance to packet loss, we actively drop several packets so as to select the rates as high as possible for transmitting packets. Experiment shows our algorithm can decrease the delay and jitter of video, and improve the system throughput as well.

Electron spectroscopy of crystals

CERN Document Server

Nemoshkalenko, V V

1979-01-01

This book is conceived as a monograph, and represents an up-to-date collection of information concerning the use of the method of X-ray photoelectron spec­ troscopy in the study of the electron structure of crystals, as well as a personal interpretation of the subject by the authors. In a natural way, the book starts in Chapter 1 with a recapitulation of the fundamentals of the method, basic relations, principles of operation, and a com­ parative presentation of the characteristics and performances of the most com­ monly used ESCA instruments (from the classical ones-Varian, McPherson, Hewlett Packard, and IEEE-up to the latest model developed by Professor Siegbahn in Uppsala), and continues with a discussion of some of the difficult problems the experimentalist must face such as calibration of spectra, prepara­ tion of samples, and evaluation of the escape depth of electrons. The second chapter is devoted to the theory of photoemission from crystal­ line solids. A discussion of the methods of Hartree-Fo...

Electronic structure engineering in silicene via atom substitution and a new two-dimensional Dirac structure Si3C

Science.gov (United States)

Yin, Na; Dai, Ying; Wei, Wei; Huang, Baibiao

2018-04-01

A lot of efforts have been made towards the band gap opening in two-dimensional silicene, the silicon version of graphene. In the present work, the electronic structures of single atom doped (B, N, Al and P) and codoped (B/N and Al/P) silicene monolayers are systematically examined on the base of density functional electronic calculations. Our results demonstrate that single atom doping can realize electron or hole doping in the silicene; while codoping, due to the syergistic effects, results in finite band gap in silicene at the Dirac point without significantly degrading the electronic properties. In addition, the characteristic of band gap shows dependence on the doping concentration. Importantly, we predict a new two-dimensional Dirac structure, the graphene-like Si3C, which also shows linear band dispersion relation around the Fermi level. Our results demonstrates an important perspective to engineer the electronic and optical properties of silicene.

Newnes electronics engineers pocket book

CERN Document Server

Brindley, Keith

2013-01-01

This book is packed with information and material which everyone involved in electronics will find indispensable. Now when you need to know a transistor's characteristics, or an integrated circuit's pinout details, simply look it up! The book is full of tables, symbols, formulae, conversions and illustrations.Promotion via the new Newnes Pocket Book catalogue to the electronics trade will drive sales into the book trade Covers component data; encapsulations; pin-outs; symbols & codings Extensive material on conversion factors, formulae; units and relationships

Report of the 2017 IEEE Cyber Science and Technology Congress

Directory of Open Access Journals (Sweden)

Wenbing Zhao

2017-12-01

Full Text Available The modern digitized world has led to the emergence of a new paradigm on global information networks and infrastructures known as Cyberspace and the studies of Cybernetics, which bring seamless integration of physical, social and mental spaces. Cyberspace is becoming an integral part of our daily life from learning and entertainment to business and cultural activities. As expected, this whole concept of Cybernetics brings new challenges that need to be tackled. The 2017 IEEE Cyber Science and Technology Congress (CyberSciTech 2017 provided a forum for researchers to report their research findings and exchange ideas. The congress took place in Orlando, Florida, USA during 6–10 November 2017. Not counting poster papers, the congress accepted over fifty papers that are divided into nine sessions. In this report, we provide an overview of the research contributions of the papers in CyberSciTech 2017.