Book review: Vetter, H. 2005. Terralog. Turtles of the World. Vol. 3. Central and South America

Directory of Open Access Journals (Sweden)

2006-12-01

Full Text Available Book review: Vetter, H. 2005. Terralog. Turtles of the World. Vol. 3. Central and South America/Schildkröten der Welt Band 3. Mittel- und Südamerika: 1-128, color pictures 606 + 9. Edition Chimaira, Frankfurt, Germany.ISBN 3-930612-82-8; 29.7 x 20.8 cm

Handbook of nuclear engineering: vol 1: nuclear engineering fundamentals; vol 2: reactor design; vol 3: reactor analysis; vol 4: reactors of waste disposal and safeguards

CERN Document Server

2013-01-01

The Handbook of Nuclear Engineering is an authoritative compilation of information regarding methods and data used in all phases of nuclear engineering. Addressing nuclear engineers and scientists at all academic levels, this five volume set provides the latest findings in nuclear data and experimental techniques, reactor physics, kinetics, dynamics and control. Readers will also find a detailed description of data assimilation, model validation and calibration, sensitivity and uncertainty analysis, fuel management and cycles, nuclear reactor types and radiation shielding. A discussion of radioactive waste disposal, safeguards and non-proliferation, and fuel processing with partitioning and transmutation is also included. As nuclear technology becomes an important resource of non-polluting sustainable energy in the future, The Handbook of Nuclear Engineering is an excellent reference for practicing engineers, researchers and professionals.

Concentration measurements of biodiesel in engine oil and in diesel fuel

International Nuclear Information System (INIS)

Mäder, A; Eskiner, M; Burger, C; Rossner, M; Krahl, J; Ruck, W

2012-01-01

This work comprised a method for concentration measurements of biodiesel in engine oil as well as biodiesel in diesel fuel by a measurement of the permittivity of the mixture at a frequency range from 100 Hz to 20 kHz. For this purpose a special designed measurement cell with high sensitivity was designed. The results for the concentration measurements of biodiesel in the engine oil and diesel fuel shows linearity to the measurement cell signal for the concentration of biodiesel in the engine oil between 0.5% Vol. to 10% Vol. and for biodiesel in the diesel fuel between 0% Vol. to 100% Vol. The method to measure the concentration of biodiesel in the engine oil or the concentration of biodiesel in the diesel fuel is very accurate and low concentration of about 0.5% Vol. biodiesel in engine oil or in diesel fuel can be measured with high accuracy.

Archives: International Journal of Engineering, Science and ...

African Journals Online (AJOL)

Items 1 - 43 of 43 ... PROMOTING ACCESS TO AFRICAN RESEARCH ... Archives: International Journal of Engineering, Science and Technology ... Vol 10, No 1 (2018) ... Vol 9, No 1 (2017) ... Vol 5, No 4 (2013) ... Current Issue Atom logo

Emotional engineering

CERN Document Server

In an age of increasing complexity, diversification and change, customers expect services that cater to their needs and to their tastes. Emotional Engineering vol 2. describes how their expectations can be satisfied and managed throughout the product life cycle, if producers focus their attention more on emotion. Emotional engineering provides the means to integrate products to create a new social framework and develops services beyond product realization to create of value across a full lifetime.  14 chapters cover a wide range of topics that can be applied to product, process and industry development, with special attention paid to the increasing importance of sensing in the age of extensive and frequent changes, including: • Multisensory stimulation and user experience  • Physiological measurement • Tactile sensation • Emotional quality management • Mental model • Kansei engineering.   Emotional Engineering vol 2 builds on Dr Fukuda’s previous book, Emotional Engineering, and provides read...

Mechanical Engineering Department Technical Review

International Nuclear Information System (INIS)

Carr, R.B.; Denney, R.M.

1981-01-01

The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication

Nigerian Journal of Chemical Research 29 Vol. 15, 2010 ...

African Journals Online (AJOL)

Hp

Nigerian Journal of Chemical Research. 29. Vol. 15, 2010. Antibacterial & Antifungal Studies On Some Coordination Compound Of Metals. With Ampicillin. Pranay Guru. Department of Engineering Chemistry, People's College of Research & Technology, Bhopal. (M. P.) India, email:pranayguru@rediffmail.com. ABSTRACT.

West African Journal of Industrial and Academic Research - Vol 4 ...

African Journals Online (AJOL)

West African Journal of Industrial and Academic Research - Vol 4, No 1 (2012) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... on Gas Turbine Engine Data · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Z Physics at LEP 1. Vol. 3

International Nuclear Information System (INIS)

Altarelli, G.; Kleiss, R.; Verzegnassi, C.

1989-01-01

The contents of this final report from the Workshop on Z Physics at LEP can be divided into two parts. The first part, comprising Vols. 1 and 2, is a relatively concise but fairly complete handbook on the physics of e + e - annihilation near the Z peak (with normal LEP luminosity and unpolarized beams, appropriate for the first phase of LEP operation). The second part (Vol. 3) is devoted to a review of the existing Monte Carlo event generators for LEP physics. A special effort has been made to co-ordinate the different parts of this report, with the aim of achieving a systematic and balanced review of the subject, rather than having simply a collection of separate contributions. (orig.)

Z physics at LEP 1. Vol. 1

International Nuclear Information System (INIS)

Altarelli, G.; Kleiss, R.; Verzegnassi, C.

1989-01-01

The contents of this final report from the Workshop on Z Physics at LEP can be divided into two parts. The first part, comprising Vols. 1 and 2, is a relatively concise but fairly complete handbook on the physics of e + e - annihilation near the Z peak (with normal LEP luminosity and unpolarized beams, appropriate for the first phase of LEP operation). The second part (Vol. 3) is devoted to a review of the existing Monte Carlo event generators for LEP physics. A special effort has been made to co-ordinate the different parts of this report, with the aim of achieving a systematic and balanced review of the subject, rather than having simply a collection of separate contributions. (orig.)

Comparison of cross culture engineering ethics training using the simulator for engineering ethics education.

Science.gov (United States)

Chung, Christopher

2015-04-01

This paper describes the use and analysis of the Simulator for Engineering Ethics Education (SEEE) to perform cross culture engineering ethics training and analysis. Details describing the first generation and second generation development of the SEEE are published in Chung and Alfred, Science and Engineering Ethics, vol. 15, 2009 and Alfred and Chung, Science and Engineering Ethics, vol. 18, 2012. In this effort, a group of far eastern educated students operated the simulator in the instructional, training, scenario, and evaluation modes. The pre and post treatment performance of these students were compared to U.S. Educated students. Analysis of the performance indicated that the far eastern educated student increased their level of knowledge 23.7 percent while U.S. educated students increased their level of knowledge by 39.3 percent.

Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1 through Vol. 15, No. 6

International Nuclear Information System (INIS)

Cottrell, W.B.; Klein, A.

1975-04-01

This issue of the Index to Nuclear Safety covers only articles included in Nuclear Safety, Vol. 11, No. 1, through Vol. 15, No. 6. This index is presented in three sections as follows: Chronological List of Articles by Volume; Permuted Title (KWIC) Index; and Author Index. (U.S.)

Advances in Multimedia, Software Engineering and Computing Vol.1 : Proceedings of the 2011 MSEC International Conference on Multimedia, Software Engineering and Computing

CERN Document Server

Lin, Sally

2012-01-01

MSEC2011 is an integrated conference concentrating its focus upon Multimedia ,Software Engineering, Computing and Education. In the proceeding, you can learn much more knowledge about Multimedia, Software Engineering ,Computing and Education of researchers all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned field. In order to meet high standard of Springer, AISC series ,the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organization had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

Advances in Multimedia, Software Engineering and Computing Vol.2 : Proceedings of the 2011 MSEC International Conference on Multimedia, Software Engineering and Computing

CERN Document Server

Lin, Sally

2012-01-01

MSEC2011 is an integrated conference concentrating its focus upon Multimedia ,Software Engineering, Computing and Education. In the proceeding, you can learn much more knowledge about Multimedia, Software Engineering, Computing and Education of researchers all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned field. In order to meet high standard of Springer, AISC series ,the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organization had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

Milestones in software engineering and knowledge engineering history: a comparative review.

Science.gov (United States)

del Águila, Isabel M; Palma, José; Túnez, Samuel

2014-01-01

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because "those who cannot remember the past are condemned to repeat it." This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one.

Milestones in Software Engineering and Knowledge Engineering History: A Comparative Review

Science.gov (United States)

del Águila, Isabel M.; Palma, José; Túnez, Samuel

2014-01-01

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because “those who cannot remember the past are condemned to repeat it.” This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one. PMID:24624046

embracing the future of engineering education in nigeria

African Journals Online (AJOL)

HOD

Nigerian engineering teaching style and outputs, some of the challenges being faced by engineering education in. Nigeria .... feelings and reactions of the students in this situation ...... new century," Chemical Engineering Education, vol. 34, pp ...

The JSC Engineering Directorate Product Peer Review Process

Science.gov (United States)

Jenks, Kenneth C.

2009-01-01

The JSC Engineering Directorate has developed a Product Peer Review process in support of NASA policies for project management and systems engineering. The process complies with the requirements of NPR 7120.5, NPR 7123.1 and NPR 7150.2 and follows the guidance in NASA/SP-2007-6105. This presentation will give an overview of the process followed by a brief demonstration of an actual peer review, with audience participation.

A Study of Technical Engineering Peer Reviews at NASA

Science.gov (United States)

Chao, Lawrence P.; Tumer, Irem Y.; Bell, David G.

2003-01-01

This report describes the state of practices of design reviews at NASA and research into what can be done to improve peer review practices. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review and Critical Design Review are a required part of every project and mission development. However, the technical, engineering peer reviews that support teams' work on such projects are informal, some times ad hoc, and inconsistent across the organization. The goal of this work is to identify best practices and lessons learned from NASA's experience, supported by academic research and methodologies to ultimately improve the process. This research has determined that the organization, composition, scope, and approach of the reviews impact their success. Failure Modes and Effects Analysis (FMEA) can identify key areas of concern before or in the reviews. Product definition tools like the Project Priority Matrix, engineering-focused Customer Value Chain Analysis (CVCA), and project or system-based Quality Function Deployment (QFD) help prioritize resources in reviews. The use of information technology and structured design methodologies can strengthen the engineering peer review process to help NASA work towards error-proofing the design process.

Neurophysiology and neural engineering: a review.

Science.gov (United States)

Prochazka, Arthur

2017-08-01

Neurophysiology is the branch of physiology concerned with understanding the function of neural systems. Neural engineering (also known as neuroengineering) is a discipline within biomedical engineering that uses engineering techniques to understand, repair, replace, enhance, or otherwise exploit the properties and functions of neural systems. In most cases neural engineering involves the development of an interface between electronic devices and living neural tissue. This review describes the origins of neural engineering, the explosive development of methods and devices commencing in the late 1950s, and the present-day devices that have resulted. The barriers to interfacing electronic devices with living neural tissues are many and varied, and consequently there have been numerous stops and starts along the way. Representative examples are discussed. None of this could have happened without a basic understanding of the relevant neurophysiology. I also consider examples of how neural engineering is repaying the debt to basic neurophysiology with new knowledge and insight. Copyright © 2017 the American Physiological Society.

Value-Engineering Review for Numerical Control

Science.gov (United States)

Warner, J. L.

1984-01-01

Selecting parts for conversion from conventional machining to numerical control, value-engineering review performed for every part to identify potential changes to part design that result in increased production efficiency.

Journal of Modeling, Design and Management of Engineering ...

African Journals Online (AJOL)

Journal of Modeling, Design and Management of Engineering Systems. ... Journal Home > Vol 5, No 1 (2007) ... or mathematical modeling, computing, simulation, design and/or operations research tools for solving engineering problems.

Fabrication of scaffolds in tissue engineering: A review

Science.gov (United States)

Zhao, Peng; Gu, Haibing; Mi, Haoyang; Rao, Chengchen; Fu, Jianzhong; Turng, Lih-sheng

2018-03-01

Tissue engineering (TE) is an integrated discipline that involves engineering and natural science in the development of biological materials to replace, repair, and improve the function of diseased or missing tissues. Traditional medical and surgical treatments have been reported to have side effects on patients caused by organ necrosis and tissue loss. However, engineered tissues and organs provide a new way to cure specific diseases. Scaffold fabrication is an important step in the TE process. This paper summarizes and reviews the widely used scaffold fabrication methods, including conventional methods, electrospinning, three-dimensional printing, and a combination of molding techniques. Furthermore, the differences among the properties of tissues, such as pore size and distribution, porosity, structure, and mechanical properties, are elucidated and critically reviewed. Some studies that combine two or more methods are also reviewed. Finally, this paper provides some guidance and suggestions for the future of scaffold fabrication.

Performance and emissions analysis on using acetone–gasoline fuel blends in spark-ignition engine

OpenAIRE

Ashraf Elfasakhany

2016-01-01

In this study, new blended fuels were formed by adding 3–10 vol. % of acetone into a regular gasoline. According to the best of the author's knowledge, it is the first time that the influence of acetone blends has been studied in a gasoline-fueled engine. The blended fuels were tested for their energy efficiencies and pollutant emissions using SI (spark-ignition) engine with single-cylinder and 4-stroke. Experimental results showed that the AC3 (3 vol.% acetone + 97 vol.% gasoline) blended fu...

Ethical Risk Management Education in Engineering: A Systematic Review.

Science.gov (United States)

Guntzburger, Yoann; Pauchant, Thierry C; Tanguy, Philippe A

2017-04-01

Risk management is certainly one of the most important professional responsibilities of an engineer. As such, this activity needs to be combined with complex ethical reflections, and this requirement should therefore be explicitly integrated in engineering education. In this article, we analyse how this nexus between ethics and risk management is expressed in the engineering education research literature. It was done by reviewing 135 articles published between 1980 and March 1, 2016. These articles have been selected from 21 major journals that specialize in engineering education, engineering ethics and ethics education. Our review suggests that risk management is mostly used as an anecdote or an example when addressing ethics issues in engineering education. Further, it is perceived as an ethical duty or requirement, achieved through rational and technical methods. However, a small number of publications do offer some critical analyses of ethics education in engineering and their implications for ethical risk and safety management. Therefore, we argue in this article that the link between risk management and ethics should be further developed in engineering education in order to promote the progressive change toward more socially and environmentally responsible engineering practices. Several research trends and issues are also identified and discussed in order to support the engineering education community in this project.

A review of free-piston engine history and applications

Energy Technology Data Exchange (ETDEWEB)

Mikalsen, R.; Roskilly, A.P. [School of Marine Science and Technology, University of Newcastle upon Tyne, Newcastle upon Tyne NE1 7RU (United Kingdom)

2007-10-15

This document reviews the history of free-piston internal combustion engines, from the air compressors and gas generators used in the mid-20th century through to recent free-piston hydraulic engines and linear electric generators. Unique features of the free-piston engine are presented and their effects on engine operation are discussed, along with potential advantages and disadvantages compared to conventional engines. The paper focuses mainly on developed engines where operational data has been reported. Finally, the potential of the free-piston engine is evaluated and the most promising designs identified. (author)

Physics at LEP2. Vol. 2

International Nuclear Information System (INIS)

Altarelli, G.; Sjoestrand, T.; Zwirner, F.

1995-01-01

This is final report of the Workshop on Physics at LEP2, held at CERN during 1995. The first part of vol. 1 is devoted to aspects of machine physics of particular relevance to experiments, including the energy, luminosity and interaction regions, as well as the measurement of beam energy. The second part of vol. 1 is a relatively concise, but fairly complete, handbook on the physics of e + e - annihilation above the WW threshold and up to √s∼200 GeV. It contains discussions on WW cross-sections and distributions, W mass determination, Standard Model processes, QCD and gamma-gamma physics, as well as aspects of discovery physics, such as Higgs, new particle searches, triple gauge boson couplings and Z'. The second volume contains a review of the existing Monte Carlo generators for LEP2 physics. These include generators for WW physics, QCD and gamma-gamma processes, Bhabha scattering and discovery physics. A special effort was made to co-ordinate the different parts, with a view to achieving a systematic and balanced review of the subject, rather than just publishing a collection of separate contributions. (orig.)

Physics at LEP2. Vol. 1

International Nuclear Information System (INIS)

Altarelli, G.; Sjoestrand, T.; Zwirner, F.

1996-01-01

This is the final report of the Workshop on Physics at LEP2, held at CERN during 1995. The first part of vol. 1 is devoted to aspects of machine physics of particular relevance to experiments, including the energy, luminosity and interaction regions, as well as the measurement of beam energy. The second part of vol. 1 is a relatively concise, but fairly complete, handbook on the physics of e + e - annihilation above the WW threshold and up to √s∼200 GeV. It contains discussions on WW cross-sections and distributions, W mass determination, Standard Model processes, QCD and gamma-gamma physics, as well as aspects of discovery physics, such as Higgs, new particle searches, triple gauge boson couplings and Z'. The second volume contains a review of the existing Monte Carlo generators for LEP2 physics. These include generators for WW physics, QCD and gamma-gamma processes, Bhabha scattering and discovery physics. A special effort was made to co-ordinate the different parts, with a view to achieving a systematic and balanced review of the subject, rather than just publishing a collection of separate contributions. (orig.)

Physics at LEP2. Vol. 2

Energy Technology Data Exchange (ETDEWEB)

Altarelli, G [ed.; Sjoestrand, T [ed.; Zwirner, F [ed.

1995-02-19

This is final report of the Workshop on Physics at LEP2, held at CERN during 1995. The first part of vol. 1 is devoted to aspects of machine physics of particular relevance to experiments, including the energy, luminosity and interaction regions, as well as the measurement of beam energy. The second part of vol. 1 is a relatively concise, but fairly complete, handbook on the physics of e{sup +}e{sup -} annihilation above the WW threshold and up to {radical}s{approx}200 GeV. It contains discussions on WW cross-sections and distributions, W mass determination, Standard Model processes, QCD and gamma-gamma physics, as well as aspects of discovery physics, such as Higgs, new particle searches, triple gauge boson couplings and Z`. The second volume contains a review of the existing Monte Carlo generators for LEP2 physics. These include generators for WW physics, QCD and gamma-gamma processes, Bhabha scattering and discovery physics. A special effort was made to co-ordinate the different parts, with a view to achieving a systematic and balanced review of the subject, rather than just publishing a collection of separate contributions. (orig.).

Spark ignition natural gas engines-A review

International Nuclear Information System (INIS)

Cho, Haeng Muk; He, Bang-Quan

2007-01-01

Natural gas is a promising alternative fuel to meet strict engine emission regulations in many countries. Natural gas engines can operate at lean burn and stoichiometric conditions with different combustion and emission characteristics. In this paper, the operating envelope, fuel economy, emissions, cycle-to-cycle variations in indicated mean effective pressure and strategies to achieve stable combustion of lean burn natural gas engines are highlighted. Stoichiometric natural gas engines are briefly reviewed. To keep the output power and torque of natural gas engines comparable to those of their gasoline or Diesel counterparts, high boost pressure should be used. High activity catalyst for methane oxidation and lean deNOx system or three way catalyst with precise air-fuel ratio control strategies should be developed to meet future stringent emission standards

Vol draadwerk

African Journals Online (AJOL)

Owner

Die motto van Marius Crous se derde bundel,. Vol draadwerk (2012) is ontleen aan die vader van die psigoanalise, Sigmund Freud, wat lui: “Everywhere I go I find a poet has been there before me.” Vol draadwerk verskyn ses jaar ná sy vorige bundel, Aan 'n beentjie sit en kluif. (2006). Vir sy bundel, Brief uit die kolonies ...

Straight vegetable oils usage in a compression ignition engine - A review

Energy Technology Data Exchange (ETDEWEB)

Misra, R.D.; Murthy, M.S. [Mechanical Engineering Department, National Institute of Technology, Silchar 788010, Assam (India)

2010-12-15

The ever increasing fossil fuel usage and cost, environmental concern has forced the world to look for alternatives. Straight vegetable oils in compression ignition engine are a ready solution available, however, with certain limitations and with some advantages as reported by many researchers. A comprehensive and critical review is presented specifically pertaining to straight vegetable oils usage in diesel engine. A detailed record of historical events described. Research carried out specifically under Indian conditions and international research work on the usage of straight vegetable oils in the diesel engine is separately reviewed. Many researchers have reported that straight vegetable oils in small percentage blends with diesel when used lower capacity diesel engines have shown great promise with regards to the thermal performance as well exhaust emissions. This has been explained in detail. Finally based on the review of international as well as Indian research a SWOT analysis is carried out. The review concludes that there is still scope for research in this area. (author)

General and special engineering materials science. Vol. 1

International Nuclear Information System (INIS)

Ondracek, G.; Voehringer, O.

1983-04-01

The present report about general and special engineering materials science is the result of lectures given by the authors in two terms in 1982 at Instituto Balseiro, San Carlos de Bariloche, the graduated college of the Universidad de Cuyo and Comision Nacional de Energia Atomica, Republica Argentina. These lectures were organised in the frame of the project ''nuclear engineering'' (ARG/78/020) of the United Nations Development Program (UNDP) by the International Atomic Energy Agency (IAEA). Some chapters of the report are written in English, others in Spanish. The report is subdivided into three volumes: Volume I treats general engineering materials science in 4 capital chapters on the structure of materials, the properties of materials, materials technology and materials testing and investigation supplemented by a selected detailed chapter about elasticity plasticity and rupture mechanics. Volume II concerns special engineering materials science with respect to nuclear materials under normal reactor operation conditions including reactor clad and structural materials, nuclear fuels and fuel elements and nuclear waste as a materials viewpoint. Volume III - also concerning special engineering materials science - considers nuclear materials with respect to off-normal (''accident'') reactor operation conditions including nuclear materials in loss-of-coolant accidents and nuclear materials in core melt accidents. (orig.) [de

Study of exhaust emissions of direct injection diesel engine operating on ethanol, petrol and rapeseed oil blends

International Nuclear Information System (INIS)

Labeckas, Gvidonas; Slavinskas, Stasys

2009-01-01

This article presents the bench testing results of a four stroke, four cylinder, direct injection, unmodified, diesel engine operating on pure rapeseed oil (RO) and its 2.5 vol%, 5 vol%, 7.5 vol% and 10 vol% blends with ethanol (ERO), petrol (PRO) and both improving agents applied in equal proportions as 50:50 vol% (EPRO). The purpose of the research is to examine the effect of ethanol and petrol addition into RO on diesel engine emission characteristics and smoke opacity of the exhausts. The biggest NO x emissions, 1954 and 2078 ppm, at 2000 min -1 speed generate blends PRO10 (9.72%) and EPRO5 (11.13%) against, 1731 and 1411 ppm, produced from ERO5 (12%) and ERO10 (13.2% oxygen) blends. The carbon monoxide, CO, emissions emitted from a fully loaded engine fuelled with three agent blends EPRO5-7.5 at maximum torque and rated speed are higher by 39.5-18.8% and 27.5-16.1% and smoke opacity lower by 3.3-9.0% and 24.1-17.6% comparing with RO case. When operating at rated 2200 min -1 mode, the carbon dioxide, CO 2 , emissions are lower, 6.9-6.3 vol%, from blends EPRO5-7.5 relative to that from RO, 7.8 vol%, accompanied by a slightly higher emission of unburned hydrocarbons HC, 16 ppm, and residual oxygen contents O 2 , 10.4-12.0 vol%, in the exhausts

South African Journal of Education - Vol 31, No 1 (2011)

African Journals Online (AJOL)

South African Journal of Education - Vol 31, No 1 (2011) ... How an analysis of reviewers' reports can enhance the quality of submissions to a journal of education ... Doctoral learning: a case for a cohort model of supervision and support ...

An Alternative Perspective for Malaysian Engineering Education: A Review from Year 2000-2012

Science.gov (United States)

Jayarajah, Kamaleswaran; Saat, Rohaida Mohd; Rauf, Rose Amnah Abdul

2013-01-01

The purpose of this study is to explore the research base of engineering education in the "Journal of Engineering Education" ("JEE") through an analysis review of articles for a 12-year period, from 2000 to 2012. The research base review focuses on identifying five characteristics of engineering education: (a) temporal…

A Systematic Literature Review of US Engineering Ethics Interventions.

Science.gov (United States)

Hess, Justin L; Fore, Grant

2018-04-01

Promoting the ethical formation of engineering students through the cultivation of their discipline-specific knowledge, sensitivity, imagination, and reasoning skills has become a goal for many engineering education programs throughout the United States. However, there is neither a consensus throughout the engineering education community regarding which strategies are most effective towards which ends, nor which ends are most important. This study provides an overview of engineering ethics interventions within the U.S. through the systematic analysis of articles that featured ethical interventions in engineering, published in select peer-reviewed journals, and published between 2000 and 2015. As a core criterion, each journal article reviewed must have provided an overview of the course as well as how the authors evaluated course-learning goals. In sum, 26 articles were analyzed with a coding scheme that included 56 binary items. The results indicate that the most common methods for integrating ethics into engineering involved exposing students to codes/standards, utilizing case studies, and discussion activities. Nearly half of the articles had students engage with ethical heuristics or philosophical ethics. Following the presentation of the results, this study describes in detail four articles to highlight less common but intriguing pedagogical methods and evaluation techniques. The findings indicate that there is limited empirical work on ethics education within engineering across the United States. Furthermore, due to the large variation in goals, approaches, and evaluation methods described across interventions, this study does not detail "best" practices for integrating ethics into engineering. The science and engineering education community should continue exploring the relative merits of different approaches to ethics education in engineering.

Wind Generated Ocean Waves

DEFF Research Database (Denmark)

Frigaard, Peter

2001-01-01

Book review: I. R. Young, Elsevier Ocean Engineering Series, Vol 2. Elsevier Science, Oxford, UK, 1999, 306 pages, hardbound, ISBN 0-08-043317-0, Dfl. 275,00 (US$ 139.50)......Book review: I. R. Young, Elsevier Ocean Engineering Series, Vol 2. Elsevier Science, Oxford, UK, 1999, 306 pages, hardbound, ISBN 0-08-043317-0, Dfl. 275,00 (US$ 139.50)...

African Review of Economics and Finance - Vol 6, No 1 (2014)

African Journals Online (AJOL)

Journal Home > Archives > Vol 6, No 1 (2014) ... 7Implication of mergers and acquisitions on stock returns before and during the 2007–2009 credit crunch: An event study ... 9Socio-economic adaptation strategies of the urban poor in the Lagos ... and on-the-ground developing countries' realities for improved management ...

International Journal of Arts and Humanities (IJAH) Ethiopia Vol. 7 (1 ...

African Journals Online (AJOL)

Prof

2018-01-24

Jan 24, 2018 ... International Journal of Arts and Humanities (IJAH). Ethiopia. Vol. 7 (1), S/No ... Department of International and Strategic Studies. Faculty of Arts and ..... American political science review, 98(01), 171-. 189. Stiglitz, J. (2002).

General and special engineering materials science. Vol. 3

International Nuclear Information System (INIS)

Ondracek, G.; Hofmann, P.

1983-04-01

The report about general and special engineering materials science is the result of lectures given by the authors in two terms in 1982 at Instituto Balseiro, San Carlos de Bariloche, the graduated college of the Universidad de Cuyo and Comision Nacional de Energia Atomica, Republica Argentina. These lectures were organised in the frame of the project ''nuclear engineering'' (ARG/78/020) of the United Nations Development Program (UNDP) by the International Atomic Energy Agency (IAEA). Some chapters of the report are written in English, others in Spanish. The report is subdivided into three volumes. The present volume III concerns special engineering materials science and considers nuclear materials with respect to off-normal (''accident'') reactor operation conditions including nuclear materials in loss-of-coolant accident and nuclear materials in core melt accidents. (orig./IHOE) [de

General and special engineering materials science. Vol. 2

International Nuclear Information System (INIS)

Anderko, K.; Kummerer, K.R.; Ondracek, G.

1983-04-01

The present report about general and special engineering materials science is the result of lectures given by the authors in two terms in 1982 at Instituto Balseiro, San Carlos de Bariloche, the graduated college of the Universidad de Cuyo and Comision Nacional de Energia Atomica, Republica Argentina. These lectures were organised in the frame of the project ''nuclear engineering'' (ARG/78/020) of the United Nations Development Program (UNDP) by the International Atomic Energy Agency (IAEA). Some chapters of the report are written in English, others in Spanish. The report is subdivided into three volumes. The present volume II concerns special engineering materials science with respect to nuclear materials under normal reactor operation conditions including 1. reactor clad and structural materials, 2. nuclear fuels and fuel elements, 3. nuclear waste as a materials viewpoint. (orig./IHOE) [de

Mechanical Engineering Department. Technical review

Energy Technology Data Exchange (ETDEWEB)

Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

1980-01-01

The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

Mechanical engineering department technical review

International Nuclear Information System (INIS)

Carr, R.B.; Denney, R.M.

1981-01-01

The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work

Mechanical Engineering Department. Technical review

International Nuclear Information System (INIS)

Simecka, W.B.; Condouris, R.A.; Talaber, C.

1980-01-01

The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work

Diesel Engine Convert to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review

OpenAIRE

Semin; Abdul R. Ismail; Rosli A. Bakar

2009-01-01

The objective of this study was to review the previous research in the development of gaseous fuel injector for port injection CNG engine converted from diesel engine. Problem statement: The regular development of internal combustion engines change direction to answer the two most important problems determining the development trends of engines technology and in particular, their combustion systems. They were environmental protection against emission and noise, shortage of hydrocarbon fuels, ...

Review and Study of Physics Driven Pitting Corrosion Modeling in 2024-T3 Aluminum Alloys (Postprint)

Science.gov (United States)

2015-05-01

aluminum subjected to pitting corrosion under fatigue conditions ”, Journal of Aircraft, Vol. 46, No. 4, pp. 1253-1259 Wei, R.P. (2001) “A model for...and material microstructure applied to corrosion and fatigue of aluminum and steel alloys”, Engineering Fracture Mechanics , Vol. 76, pp. 695-708 Wei...Fatigue Behavior of Aluminum Alloy 7075 -T6: Modeling and Experimental Studies", Materials Science and Engineering: A, vol. 297, Issue: 1-2, 15, pp. 223

Laser Beam Shaping XIII, Proceedings of SPIE Vol. 8490

CSIR Research Space (South Africa)

Forbes, A

2012-09-01

Full Text Available .1117/12.2013615 Proc. of SPIE Vol. 8490 849001-1 Downloaded From: http://proceedings.spiedigitallibrary.org/ on 10/17/2012 Terms of Use: http://spiedl.org/terms The papers included in this volume were part of the technical conference cited on the cover and title..., Bellingham, Washington 98227-0010 USA Telephone +1 360 676 3290 (Pacific Time)? Fax +1 360 647 1445 SPIE.org Copyright ? 2012, Society of Photo-Optical Instrumentation Engineers. Copying of material in this book for internal or personal use...

Environmental concentrations of engineered nanomaterials: Review of modeling and analytical studies

International Nuclear Information System (INIS)

Gottschalk, Fadri; Sun, TianYin; Nowack, Bernd

2013-01-01

Scientific consensus predicts that the worldwide use of engineered nanomaterials (ENM) leads to their release into the environment. We reviewed the available literature concerning environmental concentrations of six ENMs (TiO 2 , ZnO, Ag, fullerenes, CNT and CeO 2 ) in surface waters, wastewater treatment plant effluents, biosolids, sediments, soils and air. Presently, a dozen modeling studies provide environmental concentrations for ENM and a handful of analytical works can be used as basis for a preliminary validation. There are still major knowledge gaps (e.g. on ENM production, application and release) that affect the modeled values, but over all an agreement on the order of magnitude of the environmental concentrations can be reached. True validation of the modeled values is difficult because trace analytical methods that are specific for ENM detection and quantification are not available. The modeled and measured results are not always comparable due to the different forms and sizes of particles that these two approaches target. -- Highlights: •Modeled environmental concentrations of engineered nanomaterials are reviewed. •Measured environmental concentrations of engineered nanomaterials are reviewed. •Possible validation of modeled data by measurements is critically evaluated. •Different approaches in modeling and measurement methods complicate validation. -- Modeled and measured environmental concentrations of engineered nanomaterials are reviewed and critically discussed

ERG [Engineering Review Group] review of the SRP [Salt Repository Project] salt irradiation effects program: Technical report

International Nuclear Information System (INIS)

Clark, D.E.

1986-11-01

The Engineering Review Group (ERG) was established by the Office of Nuclear Waste Isolation (ONWI) to help evaluate engineering-related issues in the US Department of Energy's nuclear waste repository program. The August 1985 meeting of the ERG reviewed the Salt Repository Project (SRP) salt irradiation effects program. This report documents the ERG's comments and recommendations on these subjects and the ONWI response to the specific points raised by the ERG

REQUIREMENT VERIFICATION AND SYSTEMS ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM

Science.gov (United States)

2017-09-01

VERIFICATION AND SYSTEMS ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM by Theresa L. Thomas September... ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Theresa L. Thomas 7...CODE 13. ABSTRACT (maximum 200 words) The Naval Air Systems Command (NAVAIR) systems engineering technical review (SETR) process does not

Intermediate Alcohol-Gasoline Blends, Fuels for Enabling Increased Engine Efficiency and Powertrain Possibilities

Energy Technology Data Exchange (ETDEWEB)

Splitter, Derek A [ORNL; Szybist, James P [ORNL

2014-01-01

The present study experimentally investigates spark-ignited combustion with 87 AKI E0 gasoline in its neat form and in mid-level alcohol-gasoline blends with 24% vol./vol. iso-butanol-gasoline (IB24) and 30% vol./vol. ethanol-gasoline (E30). A single-cylinder research engine is used with a low and high compression ratio of 9.2:1 and 11.85:1 respectively. The engine is equipped with hydraulically actuated valves, laboratory intake air, and is capable of external exhaust gas recirculation (EGR). All fuels are operated to full-load conditions with =1, using both 0% and 15% external cooled EGR. The results demonstrate that higher octane number bio-fuels better utilize higher compression ratios with high stoichiometric torque capability. Specifically, the unique properties of ethanol enabled a doubling of the stoichiometric torque capability with the 11.85:1 compression ratio using E30 as compared to 87 AKI, up to 20 bar IMEPg at =1 (with 15% EGR, 18.5 bar with 0% EGR). EGR was shown to provide thermodynamic advantages with all fuels. The results demonstrate that E30 may further the downsizing and downspeeding of engines by achieving increased low speed torque, even with high compression ratios. The results suggest that at mid-level alcohol-gasoline blends, engine and vehicle optimization can offset the reduced fuel energy content of alcohol-gasoline blends, and likely reduce vehicle fuel consumption and tailpipe CO2 emissions.

Review on film cooling of liquid rocket engines

Directory of Open Access Journals (Sweden)

S.R. Shine

2018-03-01

Full Text Available Film cooling in combination with regenerative cooling is presently considered as an efficient method to guarantee safe operation of liquid rocket engines having higher heat flux densities for long duration. This paper aims to bring all the research carried out in the field of liquid rocket engine film cooling since 1950. The analytical and numerical procedure followed, experimental facilities and measurements made and major inferences drawn are reviewed in detail, and compared where ever possible. Review has been made through a discussion of the analyses methodologies and the factors that influence film cooling performance. An effort has also been made to determine the status of the research, pointing out critical gaps, which are still to be explained and addressed by future generations. Keywords: Heat transfer, Liquid rocket thrust chamber, Film cooling, Cooling effectiveness

Emission Characteristics and Egr Application of Blended Fuels with Bdf and Oxygenate (dmm) in a Diesel Engine

Science.gov (United States)

Choi, Seung-Hun; Oh, Young-Taig

In this study, the possibility of biodiesel fuel and oxygenated fuel (dimethoxy methane ; DMM) was investigated as an alternative fuel for a naturally aspirated direct injection diesel engine. The smoke emission of blending fuel (biodiesel fuel 90vol-% + DMM 10vol-%) was reduced approximately 70% at 2500rpm, full load in comparison with the diesel fuel. But, engine power and brake specific energy consumption showed no significant differences. But, NOx emission of biodiesel fuel and DMM blended fuel increased compared with commercial diesel fuel due to the oxygen component in the fuel. It was needed a NOx reduction counter plan that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with BDF (95 vol-%) and DMM (5 vol-%) blended fuel and cooled EGR method (15%).

Using Model-Based Systems Engineering To Provide Artifacts for NASA Project Life-Cycle and Technical Reviews

Science.gov (United States)

Parrott, Edith L.; Weiland, Karen J.

2017-01-01

The ability of systems engineers to use model-based systems engineering (MBSE) to generate self-consistent, up-to-date systems engineering products for project life-cycle and technical reviews is an important aspect for the continued and accelerated acceptance of MBSE. Currently, many review products are generated using labor-intensive, error-prone approaches based on documents, spreadsheets, and chart sets; a promised benefit of MBSE is that users will experience reductions in inconsistencies and errors. This work examines features of SysML that can be used to generate systems engineering products. Model elements, relationships, tables, and diagrams are identified for a large number of the typical systems engineering artifacts. A SysML system model can contain and generate most systems engineering products to a significant extent and this paper provides a guide on how to use MBSE to generate products for project life-cycle and technical reviews. The use of MBSE can reduce the schedule impact usually experienced for review preparation, as in many cases the review products can be auto-generated directly from the system model. These approaches are useful to systems engineers, project managers, review board members, and other key project stakeholders.

Analysis of Oxygenated Component (butyl Ether) and Egr Effect on a Diesel Engine

Science.gov (United States)

Choi, Seung-Hun; Oh, Young-Taig

Potential possibility of the butyl ether (BE, oxygenates of di-ether group) was analyzed as an additives for a naturally aspirated direct injection diesel engine fuel. Engine performance and exhaust emission characteristics were analyzed by applying the commercial diesel fuel and oxygenates additives blended diesel fuels. Smoke emission decreased approximately 26% by applying the blended fuel (diesel fuel 80 vol-% + BE 20vol-%) at the engine speed of 25,000 rpm and with full engine load compared to the diesel fuel. There was none significant difference between the blended fuel and the diesel fuel on the power, torque, and brake specific energy consumption rate of the diesel engine. But, NOx emission from the blended fuel was higher than the commercial diesel fuel. As a counter plan, the EGR method was employed to reduce the NOx. Simultaneous reduction of the smoke and the NOx emission from the diesel engine was achieved by applying the BE blended fuel and the cooled EGR method.

Double-Blind Review in Software Engineering Venues : The Community’s Perspective

NARCIS (Netherlands)

Bacchelli, A.; Beller, M.M.

2017-01-01

The peer review process is central to the scientific method, the advancement and spread of research, as well as crucial for individual careers. However, the single-blind review mode currently used in most Software Engineering (SE) venues is susceptible to apparent and hidden biases, since reviewers

Human factors engineering program review model

International Nuclear Information System (INIS)

1994-07-01

The staff of the Nuclear Regulatory Commission is performing nuclear power plant design certification reviews based on a design process plan that describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification and an acceptable implemented design. There are two principal reasons for this approach. First, the initial design certification applications submitted for staff review did not include detailed design information. Second, since human performance literature and industry experiences have shown that many significant human factors issues arise early in the design process, review of the design process activities and results is important to the evaluation of an overall design. However, current regulations and guidance documents do not address the criteria for design process review. Therefore, the HFE Program Review Model (HFE PRM) was developed as a basis for performing design certification reviews that include design process evaluations as well as review of the final design. A central tenet of the HFE PRM is that the HFE aspects of the plant should be developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The HFE PRM consists of ten component elements. Each element in divided into four sections: Background, Objective, Applicant Submittals, and Review Criteria. This report describes the development of the HFE PRM and gives a detailed description of each HFE review element

TOPICAL REVIEW: Progress in engineering high strain lead-free piezoelectric ceramics

Science.gov (United States)

Leontsev, Serhiy O.; Eitel, Richard E.

2010-08-01

Environmental concerns are strongly driving the need to replace the lead-based piezoelectric materials currently employed as multilayer actuators. The current review describes both compositional and structural engineering approaches to achieve enhanced piezoelectric properties in lead-free materials. The review of the compositional engineering approach focuses on compositional tuning of the properties and phase behavior in three promising families of lead-free perovskite ferroelectrics: the titanate, alkaline niobate and bismuth perovskites and their solid solutions. The 'structural engineering' approaches focus instead on optimization of microstructural features including grain size, grain orientation or texture, ferroelectric domain size and electrical bias field as potential paths to induce large piezoelectric properties in lead-free piezoceramics. It is suggested that a combination of both compositional and novel structural engineering approaches will be required in order to realize viable lead-free alternatives to current lead-based materials for piezoelectric actuator applications.

LPG diesel dual fuel engine – A critical review

Directory of Open Access Journals (Sweden)

B. Ashok

2015-06-01

Full Text Available The engine, which uses both conventional diesel fuel and LPG fuel, is referred to as ‘LPG–diesel dual fuel engines’. LPG dual fuel engines are modified diesel engines which use primary fuel as LPG and secondary fuel as diesel. LPG dual fuel engines have a good thermal efficiency at high output but the performance is less during part load conditions due to the poor utilization of charges. This problem can be overcome by varying factors such as pilot fuel quantity, injection timing, composition of the gaseous fuel and intake charge conditions, for improving the performance, combustion and emissions of dual fuel engines. This article reviews about the research work done by the researchers in order to improve the performance, combustion and emission parameters of a LPG–diesel dual fuel engines. From the studies it is shown that the use of LPG in diesel engine is one of the capable methods to reduce the PM and NOx emissions but at same time at part load condition there is a drop in efficiency and power output with respect to diesel operation.

Human-factors engineering-control-room design review: Shoreham Nuclear Power Station. Draft audit report

International Nuclear Information System (INIS)

Peterson, L.R.; Preston-Smith, J.; Savage, J.W.; Rousseau, W.F.

1981-01-01

A human factors engineering preliminary design review of the Shoreham control room was performed at the site on March 30 through April 3, 1981. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. This report was prepared on the basis of the HFEB's review of the applicant's Preliminary Design Assessment and the human factors engineering design review/audit performed at the site. The presented sections are numbered to conform to the guidelines of the draft version of NUREG-0700. They summarize the teams's observations of the control room design and layout, and of the control room operators' interface with the control room environment

International Journal of Engineering, Science and Technology

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 7, No 3 (2015) >. Log in or Register to get access to full text downloads.

Retraction | Editor | International Journal of Engineering, Science ...

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 4 (2016) >. Log in or Register to get access to full text downloads.

International Journal of Engineering, Science and Technology

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 11 (2010) >. Log in or Register to get access to full text downloads.

International Journal of Engineering, Science and Technology

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 3 (2016) >. Log in or Register to get access to full text downloads.

International Journal of Engineering, Science and Technology

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 3 (2011) >. Log in or Register to get access to full text downloads.

International Journal of Engineering, Science and Technology

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2 (2010) >. Log in or Register to get access to full text downloads.

Women and Minorities in Engineering: A Review of the Literature

Science.gov (United States)

Mamaril, Natasha J. A; Royal, Kenneth D.

2008-01-01

This review of the literature investigates the various factors identified by researchers to explain women's underrepresentation in the engineering field. Because a great deal of research has been published through the years, a compilation summary of existing research was necessary. This literature review utilized searches from thousands of…

[Improving industrial microbial stress resistance by metabolic engineering: a review].

Science.gov (United States)

Fu, Ruiyan; Li, Yin

2010-09-01

Metabolic engineering is a technologic platform for industrial strain improvement and aims not only at modifying microbial metabolic fluxes, but also improving the physiological performance of industrial microbes. Microbes will meet multiple stresses in industrial processes. Consequently, elicited gene responses might result in a decrease in overall cell fitness and the efficiency of biotransformation. Thus, it is crucial to develop robust and productive microbial strains that can be integrated into industrial-scale bioprocesses. In this review, we focus on the progress of these novel methods and strategies for engineering stress-tolerance phenotypes referring to rational metabolic engineering and inverse metabolic engineering in recent years. In addition, we also address problems existing in this area and future research needs of microbial physiological functionality engineering.

Human-factors engineering control-room design review/audit: Waterford 3 SES Generating Station, Louisiana Power and Light Company

International Nuclear Information System (INIS)

Savage, J.W.

1983-01-01

A human factors engineering design review/audit of the Waterford-3 control room was performed at the site on May 10 through May 13, 1982. The report was prepared on the basis of the HFEB's review of the applicant's Preliminary Human Engineering Discrepancy (PHED) report and the human factors engineering design review performed at the site. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. The review team was assisted by consultants from Lawrence Livermore National Laboratory (University of California), Livermore, California

77 FR 18268 - Proposal Review Panel for Engineering Education and Centers; Notice of Meeting

Science.gov (United States)

2012-03-27

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Engineering Education and Centers; Notice of... Science Foundation announces the following meeting: Name: Proposal Review Panel for Engineering Education...--ERC Research Program 3:30 p.m.--7:30 p.m. Closed--ERC Education Program Thursday, March 29, 2012 8 a.m...

A review on the engine performance and exhaust emission characteristics of diesel engines fueled with biodiesel blends.

Science.gov (United States)

Damanik, Natalina; Ong, Hwai Chyuan; Tong, Chong Wen; Mahlia, Teuku Meurah Indra; Silitonga, Arridina Susan

2018-06-01

Biodiesels have gained much popularity because they are cleaner alternative fuels and they can be used directly in diesel engines without modifications. In this paper, a brief review of the key studies pertaining to the engine performance and exhaust emission characteristics of diesel engines fueled with biodiesel blends, exhaust aftertreatment systems, and low-temperature combustion technology is presented. In general, most biodiesel blends result in a significant decrease in carbon monoxide and total unburned hydrocarbon emissions. There is also a decrease in carbon monoxide, nitrogen oxide, and total unburned hydrocarbon emissions while the engine performance increases for diesel engines fueled with biodiesels blended with nano-additives. The development of automotive technologies, such as exhaust gas recirculation systems and low-temperature combustion technology, also improves the thermal efficiency of diesel engines and reduces nitrogen oxide and particulate matter emissions.

Human-factors engineering control-room design review/audit report: Byron Generating Station, Commonwealth Edison Company

International Nuclear Information System (INIS)

Savage, J.W.

1983-01-01

A human factors engineering design review/audit of the Byron Unit 1 control room was performed at the site on November 17 through November 19, 1981. This review was accomplished using the Unit 2 control room appropriately mocked-up to reflect design changes already committed to be incorporated in Unit 1. The report was prepared on the basis of the HFEB's audit of the applicant's Preliminary Design Assessment report and the human factors engineering design review performed at the site. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. The review team was assisted by consultants from BioTechnology, Inc. (Falls Church, Virginia), and from Lawrence Livermore National Laboratory (University of California), Livermore, California

Response surface methodology based optimization of diesel–n-butanol –cotton oil ternary blend ratios to improve engine performance and exhaust emission characteristics

International Nuclear Information System (INIS)

Atmanlı, Alpaslan; Yüksel, Bedri; İleri, Erol; Deniz Karaoglan, A.

2015-01-01

Highlights: • RSM based optimization for optimum blend ratio of diesel fuel, n-butanol and cotton oil was done. • 65.5 vol.% diesel fuel, 23.1 vol.% n-butanol and 11.4 vol.% cotton oil (DnBC) was determined. • DnBC decreased brake torque, brake power, BTE and BMEP, while increased BSFC. • DnBC decreased NO x , CO and HC emissions. - Abstract: Many studies declare that 20% biodiesel is the optimum concentration for biodiesel–diesel fuel blends to improve performance. The present work focuses on finding diesel fuel, n-butanol, and cotton oil optimum blend ratios for diesel engine applications by using the response surface method (RSM). Experimental test fuels were prepared by choosing 7 different concentrations, where phase decomposition did not occur in the phase diagram of −10 °C. Experiments were carried out at full load conditions and the constant speed (2200 rpm) of maximum brake torque to determine engine performance and emission parameters. According to the test results of the engine, optimization was done by using RSM considering engine performance and exhaust emissions parameters, to identify the rates of concentrations of components in the optimum blend of three. Confirmation tests were employed to compare the output values of concentrations that were identified by optimization. The real experiment results and the R 2 actual values that show the relation between the outputs from the optimizations and real experiments were determined in high accordance. The optimum component concentration was determined as 65.5 vol.% diesel, 23.1 vol.% n-butanol and 11.4 vol.% cotton oil (DnBC). According to engine performance tests brake torque, brake power, BTE and BMEP of DnBC decreased while BSFC increased compared to those of diesel fuel. NO x , CO and HC emissions of DnBC drastically decreased as 11.33%, 45.17% and 81.45%, respectively

Safety review for human factors engineering and control rooms of nuclear power plants

International Nuclear Information System (INIS)

Yang Mengzhuo

1998-01-01

Safety review for human factors engineering and control rooms of nuclear power plants (NPP) is in a forward position of science and technology, which began at American TMI severe accident and had been implemented in China. The importance and the significance of the safety review are expounded, the requirements of its scope and profundity are explained in detail. In addition, the situation of the technical document system for nuclear safety regulation on human factors engineering and control rooms of NPP in China is introduced briefly, on which the safety review is based

Tissue engineering of urethra: Systematic review of recent literature.

Science.gov (United States)

Žiaran, Stanislav; Galambošová, Martina; Danišovič, L'uboš

2017-12-01

The purpose of this article was to perform a systematic review of the recent literature on urethral tissue engineering. A total of 31 articles describing the use of tissue engineering for urethra reconstruction were included. The obtained results were discussed in three groups: cells, scaffolds, and clinical results of urethral reconstructions using these components. Stem cells of different origin were used in many experimental studies, but only autologous urothelial cells, fibroblasts, and keratinocytes were applied in clinical trials. Natural and synthetic scaffolds were studied in the context of urethral tissue engineering. The main advantage of synthetic ones is the fact that they can be obtained in unlimited amount and modified by different techniques, but scaffolds of natural origin normally contain chemical groups and bioactive proteins which increase the cell attachment and may promote the cell proliferation and differentiation. The most promising are smart scaffolds delivering different bioactive molecules or those that can be tubularized. In two clinical trials, only onlay-fashioned transplants were used for urethral reconstruction. However, the very promising results were obtained from animal studies where tubularized scaffolds, both non-seeded and cell-seeded, were applied. Impact statement The main goal of this article was to perform a systematic review of the recent literature on urethral tissue engineering. It summarizes the most recent information about cells, seeded or non-seeded scaffolds and clinical application with respect to regeneration of urethra.

Prospects of pyrolysis oil from plastic waste as fuel for diesel engines: A review

Science.gov (United States)

Mangesh, V. L.; Padmanabhan, S.; Ganesan, S.; PrabhudevRahul, D.; Reddy, T. Dinesh Kumar

2017-05-01

The purpose ofthis study is to review the existing literature about chemical recycling of plastic waste and its potential as fuel for diesel engines. This is a review covering on the field of converting waste plastics into liquid hydrocarbon fuels for diesel engines. Disposal and recycling of waste plastics have become an incremental problem and environmental threat with increasing demand for plastics. One of the effective measures is by converting waste plastic into combustible hydrocarbon liquid as an alternative fuel for running diesel engines. Continued research efforts have been taken by researchers to convert waste plastic in to combustible pyrolysis oil as alternate fuel for diesel engines. An existing literature focuses on the study of chemical structure of the waste plastic pyrolysis compared with diesel oil. Converting waste plastics into fuel oil by different catalysts in catalytic pyrolysis process also reviewed in this paper. The methodology with subsequent hydro treating and hydrocracking of waste plastic pyrolysis oil can reduce unsaturated hydrocarbon bonds which would improve the combustion performance in diesel engines as an alternate fuel.

Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery

International Nuclear Information System (INIS)

Sprouse, Charles; Depcik, Christopher

2013-01-01

Escalating fuel prices and future carbon dioxide emission limits are creating a renewed interest in methods to increase the thermal efficiency of engines beyond the limit of in-cylinder techniques. One promising mechanism that accomplishes both objectives is the conversion of engine waste heat to a more useful form of energy, either mechanical or electrical. This paper reviews the history of internal combustion engine exhaust waste heat recovery focusing on Organic Rankine Cycles since this thermodynamic cycle works well with the medium-grade energy of the exhaust. Selection of the cycle expander and working fluid are the primary focus of the review, since they are regarded as having the largest impact on system performance. Results demonstrate a potential fuel economy improvement around 10% with modern refrigerants and advancements in expander technology. -- Highlights: ► This review article focuses on engine exhaust waste heat recovery works. ► The organic Rankine cycle is superior for low to medium exergy heat sources. ► Working fluid and expander selection strongly influence efficiency. ► Several authors demonstrate viable systems for vehicle installation

STECH VOL5 (1) FEBRUARY, 2016

African Journals Online (AJOL)

Copyright 1AARR 2012-2016: www.afrrevjo.net

STECH VOL 5 (1) FEBRUARY, 2016. Vol. 5 (1), S/No11, February, 2016: 1-13 ..... Knowledge produce is an act of discovery which involves exploring, analyzing .... Architectural Research, Elsevier: Higher Education Press Limited Company.

76 FR 55389 - Federal Acquisition Regulation; Submission for OMB Review; Architect-Engineer Qualifications (SF...

Science.gov (United States)

2011-09-07

...; Submission for OMB Review; Architect-Engineer Qualifications (SF 330) AGENCIES: Department of Defense (DOD... extension of a previously approved information collection requirement for the Architect-Engineer... 330, Part I is used by all Executive agencies to obtain information from architect-engineer firms...

International Journal of Engineering, Science and Technology - Vol ...

African Journals Online (AJOL)

Effect of injection timing and injection pressure on the performance of biodiesel ester of hongeoil fuelled common rail direct injection (CRDI) engine · EMAIL FREE ... Comparison of performance and emission characteristics of diesel and diesel-water blend under varying injection timings · EMAIL FREE FULL TEXT EMAIL ...

The effect of ethanol–diesel–biodiesel blends on combustion, performance and emissions of a direct injection diesel engine

International Nuclear Information System (INIS)

Labeckas, Gvidonas; Slavinskas, Stasys; Mažeika, Marius

2014-01-01

Highlights: • Ethanol–diesel–biodiesel blends were tested at the same air–fuel ratios and three ranges of speed. • The fuel oxygen mass content reflects changes in the autoignition delay more predictably than the cetane number does. • Using of composite blend E15B suggests the brake thermal efficiency the same as the normal diesel fuel. • Adding of ethanol to diesel fuel reduces the NO x emission for richer air–fuel mixtures at all engine speeds. • The ethanol effect on CO, HC emissions and smoke opacity depends on the air–fuel ratio and engine speed. - Abstract: The article presents the test results of a four-stroke, four-cylinder, naturally aspirated, DI 60 kW diesel engine operating on diesel fuel (DF) and its 5 vol% (E5), 10 vol% (E10), and 15 vol% (E15) blends with anhydrous (99.8%) ethanol (E). An additional ethanol–diesel–biodiesel blend E15B was prepared by adding the 15 vol% of ethanol and 5 vol% of biodiesel (B) to diesel fuel (80 vol%). The purpose of the research was to examine the influence of the ethanol and RME addition to diesel fuel on start of injection, autoignition delay, combustion and maximum heat release rate, engine performance efficiency and emissions of the exhaust when operating over a wide range of loads and speeds. The test results were analysed and compared with a base diesel engine running at the same air–fuel ratios of λ = 5.5, 3.0 and 1.5 corresponding to light, medium and high loads. The same air–fuel ratios predict that the energy content delivered per each engine cycle will be almost the same for various ethanol–diesel–biodiesel blends that eliminate some side effects and improve analyses of the test results. A new approach revealed an important role of the fuel bound oxygen, which reflects changes of the autoignition delay more predictably than the cetane number does. The influence of the fuel oxygen on maximum heat release rate, maximum combustion pressure, NO x , CO emissions and smoke opacity

Applying Peer Reviews in Software Engineering Education: An Experiment and Lessons Learned

Science.gov (United States)

Garousi, V.

2010-01-01

Based on the demonstrated value of peer reviews in the engineering industry, numerous industry experts have listed it at the top of the list of desirable development practices. Experience has shown that problems (defects) are eliminated earlier if a development process incorporates peer reviews and that these reviews are as effective as or even…

Research on the NPP human factors engineering operating experience review

International Nuclear Information System (INIS)

Ren Xiangchen; Miao Hongxing; Ning Zhonghe

2006-01-01

This paper addresses the importance of the human factors engineering (HFE) for the design of nuclear power plant (NPP), especially for the design of human-machine interface in the NPP. It also summarizes the scope and content of the NPP HFE. The function, scope, content and process of the NPP human factors engineering operating experience review (OER) are mainly focused on, and significantly discussed. Finally, it briefly introduces the situation of the studies on the OER in China. (authors)

Remediation of water and wastewater by using engineered nanomaterials: A review.

Science.gov (United States)

Bishoge, Obadia K; Zhang, Lingling; Suntu, Shaldon L; Jin, Hui; Zewde, Abraham A; Qi, Zhongwei

2018-05-12

Nanotechnology is currently a fast-rising socioeconomic and political knowledge-based technology owing to the unique characteristics of its engineered nanomaterials. This branch of technology is useful for water and wastewater remediation. Many scientists and researchers have been conducting different studies and experiments on the applications of engineered nanomaterials at the local to international level. This review mainly aims to provide a current overview of existing knowledge on engineered nanomaterials and their applications in water and wastewater remediation. Furthermore, the present risks and challenges of nanotechnology are examined.

TOPICAL REVIEW: Stem cells engineering for cell-based therapy

Science.gov (United States)

Taupin, Philippe

2007-09-01

Stem cells carry the promise to cure a broad range of diseases and injuries, from diabetes, heart and muscular diseases, to neurological diseases, disorders and injuries. Significant progresses have been made in stem cell research over the past decade; the derivation of embryonic stem cells (ESCs) from human tissues, the development of cloning technology by somatic cell nuclear transfer (SCNT) and the confirmation that neurogenesis occurs in the adult mammalian brain and that neural stem cells (NSCs) reside in the adult central nervous system (CNS), including that of humans. Despite these advances, there may be decades before stem cell research will translate into therapy. Stem cell research is also subject to ethical and political debates, controversies and legislation, which slow its progress. Cell engineering has proven successful in bringing genetic research to therapy. In this review, I will review, in two examples, how investigators are applying cell engineering to stem cell biology to circumvent stem cells' ethical and political constraints and bolster stem cell research and therapy.

Surgical Engineering in Cranio-Maxillofacial Surgery: A Literature Review

Directory of Open Access Journals (Sweden)

Raphael Olszewski

2012-01-01

Full Text Available A systematic review of the literature concerning surgical engineering in cranio-maxillofacial surgery was performed. APubMed search yielded 1721 papers published between 1999 and 2011. Based on the inclusion/exclusion criteria, 1428 articles were excluded after review of titles and abstracts. Atotal of 292 articles were finally selected covering the following topics: finite element analysis (n = 18, computer-assisted surgery (n = 111, rapid prototyping models (n = 41, preoperative training simulators (n = 4, surgical guides (n = 23, image-guided navigation (n = 58, augmented reality (n = 2, video tracking (n = 1, distraction osteogenesis (n = 19, robotics (n = 8, and minimal invasive surgery (n = 7. The results show that surgical engineering plays a pivotal role in the development and improvement of cranio-maxillofacial surgery. Some technologies, such as computer-assisted surgery, image-guided navigation, and three-dimensional rapid prototyping models, have reached maturity and allow for multiple clinical applications, while augmented reality, robotics, and endoscopy still need to be improved.

Rotary engine developments at Curtiss-Wright over the past 20 years and review of general aviation engine potential. [with direct chamber injection

Science.gov (United States)

Jones, C.

1978-01-01

The development of the rotary engine as a viable power plant capable of wide application is reviewed. Research results on the stratified charge engine with direct chamber injection are included. Emission control, reduced fuel consumption, and low noise level are among the factors discussed in terms of using the rotary engine in general aviation aircraft.

Development of Demonstrably Predictive Models for Emissions from Alternative Fuels Based Aircraft Engines

Science.gov (United States)

2017-05-01

Engineering Chemistry Fundamentals, Vol. 5, No. 3, 1966, pp. 356–363. [14] Burns, R. A., Development of scalar and velocity imaging diagnostics...in an Aero- Engine Model Combustor at Elevated Pressure Using URANS and Finite- Rate Chemistry ,” 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference...FINAL REPORT Development of Demonstrably Predictive Models for Emissions from Alternative Fuels Based Aircraft Engines SERDP Project WP-2151

International Journal of Engineering, Science and Technology - Vol ...

African Journals Online (AJOL)

Fast predictive control for air-fuel ratio of SI engines using a nonlinear internal model · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. YJ Zhai, DL Yu, R Tafreshi, Y Al-Hamidi, 1-17. Design and control of three fingers motion for dexterous assembly of compliant ...

Peer review of RELAP5/MOD3 documentation

International Nuclear Information System (INIS)

Craddick, W.G.

1994-01-01

A peer review was performed on a portion of the documentation of the RELAP5/MOD3 computer code. The review was performed in two phases. The first phase was a review of Vol. III, Developmental Assessment Problems, and Vol. IV, Models and Correlations. The reviewers for this phase were Dr. Peter Griffith, Dr. Yassin Hassan, Dr. Gerald S. Lellouche, Dr. Marino di Marzo and Mr. Mark Wendel. The reviewers recommended a number of improvements, including using a frozen version of the code for assessment guided by a validation plan, better discussion of discrepancies between the code and experimental data, and better justification for flow regime maps and extension of models beyond their data base. The second phase was a review of Vol. VI, Quality Assurance of Numerical Techniques in RELAP5/MOD3. The reviewers for the second phase were Mr. Mark Wendel and Dr. Paul T. Williams. Recommendations included correction of numerous grammatical and typographical errors and better justification for the use of Lax's Equivalence Theorem

Can electronic search engines optimize screening of search results in systematic reviews: an empirical study.

Science.gov (United States)

Sampson, Margaret; Barrowman, Nicholas J; Moher, David; Clifford, Tammy J; Platt, Robert W; Morrison, Andra; Klassen, Terry P; Zhang, Li

2006-02-24

Most electronic search efforts directed at identifying primary studies for inclusion in systematic reviews rely on the optimal Boolean search features of search interfaces such as DIALOG and Ovid. Our objective is to test the ability of an Ultraseek search engine to rank MEDLINE records of the included studies of Cochrane reviews within the top half of all the records retrieved by the Boolean MEDLINE search used by the reviewers. Collections were created using the MEDLINE bibliographic records of included and excluded studies listed in the review and all records retrieved by the MEDLINE search. Records were converted to individual HTML files. Collections of records were indexed and searched through a statistical search engine, Ultraseek, using review-specific search terms. Our data sources, systematic reviews published in the Cochrane library, were included if they reported using at least one phase of the Cochrane Highly Sensitive Search Strategy (HSSS), provided citations for both included and excluded studies and conducted a meta-analysis using a binary outcome measure. Reviews were selected if they yielded between 1000-6000 records when the MEDLINE search strategy was replicated. Nine Cochrane reviews were included. Included studies within the Cochrane reviews were found within the first 500 retrieved studies more often than would be expected by chance. Across all reviews, recall of included studies into the top 500 was 0.70. There was no statistically significant difference in ranking when comparing included studies with just the subset of excluded studies listed as excluded in the published review. The relevance ranking provided by the search engine was better than expected by chance and shows promise for the preliminary evaluation of large results from Boolean searches. A statistical search engine does not appear to be able to make fine discriminations concerning the relevance of bibliographic records that have been pre-screened by systematic reviewers.

Experimental investigation of a spark ignition engine fueled with acetone-butanol-ethanol and gasoline blends

International Nuclear Information System (INIS)

Li, Yuqiang; Meng, Lei; Nithyanandan, Karthik; Lee, Timothy H.; Lin, Yilu; Lee, Chia-fon F.; Liao, Shengming

2017-01-01

Bio-butanol is typically produced by acetone-butanol-ethanol (ABE) fermentation, however, the recovery of bio-butanol from the ABE mixture involves high costs and energy consumption. Hence it is of interest to study the intermediate fermentation product, i.e. ABE, as a potentially alternative fuel. In this study, an experimental investigation of the performance, combustion and emission characteristics of a port fuel-injection SI engine fueled with ABE-gasoline blends was carried out. By testing different ABE-gasoline blends with varying ABE content (0 vol%, 10 vol%, 30 vol% and 60 vol% referred to as G100, ABE10, ABE30 and ABE60), ABE formulation (A:B:E of 1:8:1, 3:6:1 and 5:4:1 referred to as ABE(181), ABE(361) and ABE(541)), and water content (0.5 vol% and 1 vol% water referred to as W0.5 and W1), it was found that ABE(361)30 performed well in terms of engine performance and emissions, including brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), carbon monoxide (CO), unburned hydrocarbons (UHC) and nitrogen oxides (NO_x) emissions. Then, ABE(361)30 was compared with conventional fuels, including E30, B30 (30 vol% ethanol or butanol blended with gasoline) and pure gasoline (G100) under various equivalence ratios and engine loads. Overall, a higher BTE (0.2–1.4%) and lower CO (1.4–4.4%), UHC (0.3–9.9%) and NO_x (4.2–14.6%) emissions were observed for ABE(361)30 compared to those of G100 in some cases. Therefore, ABE could be a good alternative fuel to gasoline due to the environmentally benign manufacturing process (from non-edible biomass feedstock and without a recovery process), and the potential to improve energy efficiency and reduce pollutant emissions. - Highlights: • ABE (acetone-butanol-ethanol) was used as a green alternative fuel. • ABE-gasoline blends with various ratios of ABE, ABE component and water were test. • Combustion, performance and emissions characteristics were investigated. • Adding ABE into

Optimization of suitable ethanol blend ratio for motorcycle engine using response surface method.

Science.gov (United States)

Chen, Yu-Liang; Chen, Suming; Tsai, Jin-Ming; Tsai, Chao-Yin; Fang, Hsin-Hsiung; Yang, I-Chang; Liu, Sen-Yuan

2012-01-01

In view of energy shortage and air pollution, ethanol-gasoline blended fuel used for motorcycle engine was studied in this work. The emissions of carbon monoxide (CO), nitrogen oxides (NO(X)) and engine performance of a 125 cc four-stroke motorcycle engine with original carburetor using ethanol-gasoline fuels were investigated. The model of three-variable Box Behnken design (BBD) was used for experimental design, the ethanol blend ratios were prepared at 0, 10, 20 vol%; the speeds of motorcycle were selected as 30, 45, 60 km/h; and the throttle positions were set at 30, 60, 90 %. Both engine performance and air pollutant emissions were then analyzed by response surface method (RSM) to yield optimum operation parameters for tolerable pollutant emissions and maximum engine performance. The RSM optimization analysis indicated that the most suitable ethanol-gasoline blended ratio was found at the range of 3.92-4.12 vol% to yield a comparable fuel conversion efficiency, while considerable reductions of exhaust pollutant emissions of CO (-29 %) and NO(X) (-12 %) when compared to pure gasoline fuel. This study demonstrated low ethanol-gasoline blended fuels could be used in motorcycle carburetor engines without any modification to keep engine power while reducing exhaust pollutants.

Comparative performance of direct injection diesel engine operating on ethanol, petrol and rapeseed oil blends

International Nuclear Information System (INIS)

Labeckas, Gvidonas; Slavinskas, Stasys

2009-01-01

This article presents the bench testing results of a four stroke, four cylinder, direct injection, unmodified, diesel engine operating on pure rapeseed oil (RO) and its 2.5 vol%, 5 vol%, 7.5 vol% and 10 vol% blends with ethanol (ERO), petrol (PRO) and both improving agents applied in equal proportions as 50:50 vol% (EPRO). The purpose of the research is to examine the effect of ethanol and petrol addition into RO on the biofuel kinematical viscosity, brake mean effective pressure (bmep), brake specific fuel consumption (bsfc) of a diesel engine and its brake thermal efficiency (bte). Addition into RO from 2.5 to 7.5 vol% of ethanol and petrol its viscosity at ambient temperature of 20 deg. C diminishes by 9.2-28.3% and 14.1-31.7%, respectively. Heating up to the temperature of 60 deg. C the viscosity of pure RO, blends ERO2.5-7.5 and PRO2.5-10 further diminishes 4.2, 3.9-3.8 and 3.9-3.6 times. At 1800 min -1 speed, the maximum brake mean effective pressure (bmep) higher up to 1.6% comparing with that of pure RO (0.77 MPa) ensure three agent blends EPRO5-7.5, whereas at rated 2200 min -1 speed, the bmep higher by 5.6% can be obtained when fuelling the engine with blend PRO2.5. Brake specific fuel consumption (bsfc) at maximum torque (240.2 g/kWh) and rated power (234.0 g/kWh) is correspondingly lower by 3.4% and 5.5% in comparison with pure RO when biofuel blends EPRO5 and PRO2.5 are used. The biggest brake thermal efficiency at maximum torque (0.40-0.41) and rated power (0.42-0.43) relative to that of RO (0.39) suggest blends PRO2.5 and EPRO5-7.5, respectively

Draft audit report, human factors engineering control room design review: Saint Lucie Nuclear Power Plant, Unit No. 2

International Nuclear Information System (INIS)

Peterson, L.R.; Lappa, D.A.; Moore, J.W.

1981-01-01

A human factors engineering preliminary design review of the Saint Lucie Unit 2 control room was performed at the site on August 3 through August 7, 1981. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. This report was prepared on the basis of the HFEB's review of the applicant's Preliminary Design Assessment and the human factors engineering design review/audit performed at the site. The review team included human factors consultants from BioTechnology, Inc., Falls Church, Virginia, and from Lawrence Livermore National Laboratory (University of California), Livermore, California

Review on cadmium removal from aqueous solutions | Rao ...

African Journals Online (AJOL)

More attention needs to be given for regeneration/reuse/ safe disposal of the loaded adsorbents wherein the data are insufficient. The engineering aspects also need attention for commercial application of various adsorbents. International Journal of Engineering, Science and Technology, Vol. 2, No. 7, 2010, pp. 81-103 ...

Human factors engineering design review acceptance criteria for the safety parameter display

International Nuclear Information System (INIS)

McGevna, V.; Peterson, L.R.

1981-01-01

This report contains human factors engineering design review acceptance criteria developed by the Human Factors Engineering Branch (HFEB) of the Nuclear Regulatory Commission (NRC) to use in evaluating designs of the Safety Parameter Display System (SPDS). These criteria were developed in response to the functional design criteria for the SPDS defined in NUREG-0696, Functional Criteria for Emergency Response Facilities. The purpose of this report is to identify design review acceptance criteria for the SPDS installed in the control room of a nuclear power plant. Use of computer driven cathode ray tube (CRT) displays is anticipated. General acceptance criteria for displays of plant safety status information by the SPDS are developed. In addition, specific SPDS review criteria corresponding to the SPDS functional criteria specified in NUREG-0696 are established

Human Factors Engineering Review Model for advanced nuclear power reactors

International Nuclear Information System (INIS)

O'Hara, J.; Higgins, J.; Goodman, C.; Galletti, G.: Eckenrode, R.

1993-01-01

One of the major issues to emerge from the initial design reviews under the certification process was that detailed human-systems interface (HSI) design information was not available for staff review. To address the lack of design detail issue. The Nuclear Regulatory Commission (NRC) is performing the design certification reviews based on a design process plan which describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification. Since the review of a design process is unprecedented in the nuclear industry. The criteria for review are not addressed by current regulations or guidance documents and. therefore, had to be developed. Thus, an HFE Program Review Model was developed. This paper will describe the model's rationale, scope, objectives, development, general characteristics. and application

Different methods of dentin processing for application in bone tissue engineering: A systematic review.

Science.gov (United States)

Tabatabaei, Fahimeh Sadat; Tatari, Saeed; Samadi, Ramin; Moharamzadeh, Keyvan

2016-10-01

Dentin has become an interesting potential biomaterial for tissue engineering of oral hard tissues. It can be used as a scaffold or as a source of growth factors in bone tissue engineering. Different forms of dentin have been studied for their potential use as bone substitutes. Here, we systematically review different methods of dentin preparation and the efficacy of processed dentin in bone tissue engineering. An electronic search was carried out in PubMed and Scopus databases for articles published from 2000 to 2016. Studies on dentin preparation for application in bone tissue engineering were selected. The initial search yielded a total of 1045 articles, of which 37 were finally selected. Review of studies showed that demineralization was the most commonly used dentin preparation process for use in tissue engineering. Dentin extract, dentin particles (tooth ash), freeze-dried dentin, and denatured dentin are others method of dentin preparation. Based on our literature review, we can conclude that preparation procedure and the size and shape of dentin particles play an important role in its osteoinductive and osteoconductive properties. Standardization of these methods is important to draw a conclusion in this regard. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2616-2627, 2016. © 2016 Wiley Periodicals, Inc.

PERFORMANCE IMPROVEMENT OF DIESEL ENGINE THROUGH VARIOUS ADVANCEMENTS IN TURBOCHARGING TECHNOLOGY: A REVIEW

OpenAIRE

A.F. Sherwani

2016-01-01

In this paper, the effect of various advancements in turbocharging technology on diesel engine power, fuel consumption, thermal efficiency, volumetric efficiency and emissions are reviewed and analyzed.Turbochargers are used throughout the automotive industry to enhance the output of an internal combustion engine without increasing the cylinder capacity. The emphasis today is to provide a feasible engineering solution to manufacturing economics and greener road vehicles. It is because of thes...

A Review on Atomization and Sprays of Biofuels for IC Engine Applications

Directory of Open Access Journals (Sweden)

Prasad Boggavarapu

2013-06-01

Full Text Available Ever increasing energy requirements, environmental concerns and energy security needs are strongly influencing engine researchers to consider renewable biofuels as alternatives to fossil fuels. Spray process being important in IC engine combustion, existing literature on various biofuel sprays is reviewed and summarized. Both experimental and computational research findings are reviewed in a detailed manner for compression ignition (CI engine sprays and briefly for spark ignition (SI engine sprays. The physics of basic atomization process of sprays from various injectors is included to highlight the most recent research findings followed by discussion highlighting the effect of physico-chemical properties on spray atomization for both biofuels and fossil fuels. Biodiesel sprays are found to penetrate faster and have narrow spray plume angle and larger droplet sizes compared to diesel. Results of analytical and computational models are shown to be useful in shedding light on the actual process of atomization. However, further studies on understanding primary atomization and the effect of fuel properties on primary atomization are required. As far as secondary atomization is concerned, changes in regimes are observed to occur at higher air-jet velocities for biodiesel compared to those of diesel. Evaporating sprays revealed that the liquid length is longer for biodiesel. Pure plant oil sprays with potential use in CI engines may require alternative injector technology due to slower breakup as compared to diesel. Application of ethanol to gasoline engines may be feasible without any modifications to port fuel injection (PFI engines. More studies are required on the application of alternative fuels to high pressure sprays used in Gasoline Direct Injection (GDI engines.

Review of the Space Mapping Approach to Engineering Optimization and Modeling

DEFF Research Database (Denmark)

Bakr, M. H.; Bandler, J. W.; Madsen, Kaj

2000-01-01

We review the Space Mapping (SM) concept and its applications in engineering optimization and modeling. The aim of SM is to avoid computationally expensive calculations encountered in simulating an engineering system. The existence of less accurate but fast physically-based models is exploited. S......-based Modeling (SMM). These include Space Derivative Mapping (SDM), Generalized Space Mapping (GSM) and Space Mapping-based Neuromodeling (SMN). Finally, we address open points for research and future development....

77 FR 3844 - Agency Information Collection (Architect-Engineer Fee Proposal) Activity Under OMB Review

Science.gov (United States)

2012-01-25

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0208] Agency Information Collection (Architect--Engineer Fee Proposal) Activity Under OMB Review AGENCY: Veterans Health Administration... . Please refer to ``OMB Control No. 2900-0208.'' SUPPLEMENTARY INFORMATION: Titles: a. Architect--Engineer...

Electrochemical energy storage. Vol. 1. Fundamentals, aqueous storage batteries. Elektrochemische Energiespeicher. Bd. 1. Grundlagen, waessrige Akkumulatoren

Energy Technology Data Exchange (ETDEWEB)

Beck, F; Euler, K J

1984-01-01

Vol. 1 is a synthesis of electrochemical, battery-technical and energy industry aspects. The role of energy storage systems in the energy industry, e.g. in connection with a hydrogen technology, is discussed along with the thermodynamic, kinetic, materials-technical and process engineering fundamentals. ''Classic'' and new systems are described in full detail for the first time. Cyclisation and technical/economic criteria of selection are discussed. (orig./GG).

Experimental and regression analysis for multi cylinder diesel engine operated with hybrid fuel blends

Directory of Open Access Journals (Sweden)

Gopal Rajendiran

2014-01-01

Full Text Available The purpose of this research work is to build a multiple linear regression model for the characteristics of multicylinder diesel engine using multicomponent blends (diesel- pungamia methyl ester-ethanol as fuel. Nine blends were tested by varying diesel (100 to 10% by Vol., biodiesel (80 to 10% by vol. and keeping ethanol as 10% constant. The brake thermal efficiency, smoke, oxides of nitrogen, carbon dioxide, maximum cylinder pressure, angle of maximum pressure, angle of 5% and 90% mass burning were predicted based on load, speed, diesel and biodiesel percentage. To validate this regression model another multi component fuel comprising diesel-palm methyl ester-ethanol was used in same engine. Statistical analysis was carried out between predicted and experimental data for both fuel. The performance, emission and combustion characteristics of multi cylinder diesel engine using similar fuel blends can be predicted without any expenses for experimentation.

Quality of Design, Analysis and Reporting of Software Engineering Experiments:A Systematic Review

OpenAIRE

By Kampenes, Vigdis

2007-01-01

Background: Like any research discipline, software engineering research must be of a certain quality to be valuable. High quality research in software engineering ensures that knowledge is accumulated and helpful advice is given to the industry. One way of assessing research quality is to conduct systematic reviews of the published research literature. Objective: The purpose of this work was to assess the quality of published experiments in software engineering with respect to the validit...

A review of Curtiss-Wright rotary engine developments with respect to general aviation potential

Science.gov (United States)

Jones, C.

1979-01-01

Aviation related rotary (Wankel-type) engine tests, possible growth directions and relevant developments at Curtiss-Wright have been reviewed. Automotive rotary engines including stratified charge are described and flight test results of rotary aircraft engines are presented. The current 300 HP engine prototype shows basic durability and competitive performance potential. Recent parallel developments have separately confirmed the geometric advantages of the rotary engine for direct injected unthrottled stratified charge. Specific fuel consumption equal to or better than pre- or swirl-chamber diesels, low emission and multi-fuel capability have been shown by rig tests of similar rotary engine.

Geology and engineering geology of roads in South Africa

CSIR Research Space (South Africa)

Paige-Green, P

2004-07-01

Full Text Available zone of the Limpopo Belt, South Africa, South African Journal of Geology, Vol 101 (3), pp 201-214. [3] Partridge, T. 1975. Some geomorphic factors influencing the formation and engineering properties of soil materials in South Africa. Proc 5th... land. 2003. Pretoria: Council for Geosciences and South African Institute of Engineering and Environmental Geologists. [23] Varnes, DJ. 1978. Slope movement types and processes. In: Landslides: analysis and control. Edited by RL Schuster and RJ...

Human factors engineering plan for reviewing nuclear plant modernization programs

International Nuclear Information System (INIS)

O'Hara, John; Higgins, James

2004-12-01

The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation

Human factors engineering plan for reviewing nuclear plant modernization programs

Energy Technology Data Exchange (ETDEWEB)

O' Hara, John; Higgins, James [Brookhaven National Laboratory, Upton, NY (United States)

2004-12-01

The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation.

Performance and emissions analysis on using acetone–gasoline fuel blends in spark-ignition engine

Directory of Open Access Journals (Sweden)

Ashraf Elfasakhany

2016-09-01

Full Text Available In this study, new blended fuels were formed by adding 3–10 vol. % of acetone into a regular gasoline. According to the best of the author's knowledge, it is the first time that the influence of acetone blends has been studied in a gasoline-fueled engine. The blended fuels were tested for their energy efficiencies and pollutant emissions using SI (spark-ignition engine with single-cylinder and 4-stroke. Experimental results showed that the AC3 (3 vol.% acetone + 97 vol.% gasoline blended fuel has an advantage over the neat gasoline in exhaust gases temperature, in-cylinder pressure, brake power, torque and volumetric efficiency by about 0.8%, 2.3%, 1.3%, 0.45% and 0.9%, respectively. As the acetone content increases in the blends, as the engine performance improved where the best performance obtained in this study at the blended fuel of AC10. In particular, exhaust gases temperature, in-cylinder pressure, brake power, torque and volumetric efficiency increase by about 5%, 10.5%, 5.2%, 2.1% and 3.2%, respectively, compared to neat gasoline. In addition, the use of acetone with gasoline fuel reduces exhaust emissions averagely by about 43% for carbon monoxide, 32% for carbon dioxide and 33% for the unburnt hydrocarbons. The enhanced engine performance and pollutant emissions are attributed to the higher oxygen content, slight leaning effect, lower knock tendency and high flame speeds of acetone, compared to the neat gasoline. Finally the mechanism of acetone combustion in gasoline-fueled engines is proposed in this work; two main pathways for acetone combustion are highlighted; furthermore, the CO, CO2 and UHC (unburnt hydrocarbons mechanisms of formation and oxidation are acknowledged. Such acetone mechanism is employed for further understanding acetone combustion in spark-ignition engines.

Engineering characterization of ground motion. Task II: Soil structure interaction effects on structural response

Energy Technology Data Exchange (ETDEWEB)

Luco, J E; Wong, H L [Structural and Earthquake Engineering Consultants, Inc., Sierra Madre, CA (United States); Chang, C -Y; Power, M S; Idriss, I M [Woodward-Clyde Consultants, Walnut Creek, CA (United States)

1986-08-01

This report presents the results of part of a two-task study on the engineering characterization of earthquake ground motion for nuclear power plant design. The overall objective of this research program sponsored by the U.S. Nuclear Regulatory Commission (USNRC) is to develop recommendations for methods for selecting design response spectra or acceleration time histories to be used to characterize motion at the foundation level of nuclear power plants. Task I of the study, which is presented in Vol. 1 of NUREG/CR-3805, developed a basis for selecting design response spectra taking into account the characteristics of free-field ground motion found to be significant in causing structural damage. Task II incorporates additional considerations of effects of spatial variations of ground motions and soil-structure interaction on foundation motions and structural response. The results of Task II are presented in Vols. 2 through of NUREG/CR-3805 as follows: Vol. 2 effects of ground motion characteristics on structural response considering localized structural nonlinearities and soil-structure interaction effects; Vol. 3 observational data on spatial variations of earthquake ground motions; Vol. 4 soil-structure interaction effects on structural response; and Vol. 5, summary based on Tasks I and II studies. This report presents the results of the Vol. 4 studies.

Power plant engineering dictionary. Vol. 2. 4. rev. and enlarged ed.

International Nuclear Information System (INIS)

1987-01-01

The dictionary is a compilation of 6000 German and English technical terms of power plant engineering as far as power plants, turbine-generators and assembly engineering are concerned. It is meant to form a basis for uniform terminology on technical documents. The dictionary is the result of a joint effort of KWU and UPC. (DG)

Recent Advances in Crystal Engineering from Nanoscience Views: A Brief Review

Directory of Open Access Journals (Sweden)

Marzieh Arab Fashapoyeh

2017-01-01

Full Text Available Crystal engineering has recently emerged as a method of choice for the design and construction of organic as well as metal-organic functional materials. Crystal engineering attempts to establish packing trends in whole families of compounds and seeks to establish connections between structure and function. The utility of crystal engineering has also been expanded to the nanoscience and the development of nanomaterials. The crystal engineering of materials on the nanoscale has attracted attention from various fields of research. Using bottom-up assembly strategies, a wide range of functional systems can be accessed. Materials of nanometer-scale dimensions having unique physicochemical properties are of great interest in various fields such as synthetic chemistry, materials science, catalysis and medicine. This review concerns to the recent advances in crystal engineering from nanoscience views. This study was conducted in four categories; nanococrystals, nano metal-organic frameworks, composites of polyoxometalates and also some of the nanocarbons.

A Review of Three-Dimensional Printing in Tissue Engineering.

Science.gov (United States)

Sears, Nick A; Seshadri, Dhruv R; Dhavalikar, Prachi S; Cosgriff-Hernandez, Elizabeth

2016-08-01

Recent advances in three-dimensional (3D) printing technologies have led to a rapid expansion of applications from the creation of anatomical training models for complex surgical procedures to the printing of tissue engineering constructs. In addition to achieving the macroscale geometry of organs and tissues, a print layer thickness as small as 20 μm allows for reproduction of the microarchitectures of bone and other tissues. Techniques with even higher precision are currently being investigated to enable reproduction of smaller tissue features such as hepatic lobules. Current research in tissue engineering focuses on the development of compatible methods (printers) and materials (bioinks) that are capable of producing biomimetic scaffolds. In this review, an overview of current 3D printing techniques used in tissue engineering is provided with an emphasis on the printing mechanism and the resultant scaffold characteristics. Current practical challenges and technical limitations are emphasized and future trends of bioprinting are discussed.

Tsallis Entropy Theory for Modeling in Water Engineering: A Review

Directory of Open Access Journals (Sweden)

Vijay P. Singh

2017-11-01

Full Text Available Water engineering is an amalgam of engineering (e.g., hydraulics, hydrology, irrigation, ecosystems, environment, water resources and non-engineering (e.g., social, economic, political aspects that are needed for planning, designing and managing water systems. These aspects and the associated issues have been dealt with in the literature using different techniques that are based on different concepts and assumptions. A fundamental question that still remains is: Can we develop a unifying theory for addressing these? The second law of thermodynamics permits us to develop a theory that helps address these in a unified manner. This theory can be referred to as the entropy theory. The thermodynamic entropy theory is analogous to the Shannon entropy or the information theory. Perhaps, the most popular generalization of the Shannon entropy is the Tsallis entropy. The Tsallis entropy has been applied to a wide spectrum of problems in water engineering. This paper provides an overview of Tsallis entropy theory in water engineering. After some basic description of entropy and Tsallis entropy, a review of its applications in water engineering is presented, based on three types of problems: (1 problems requiring entropy maximization; (2 problems requiring coupling Tsallis entropy theory with another theory; and (3 problems involving physical relations.

A comprehensive review of cryogels and their roles in tissue engineering applications.

Science.gov (United States)

Hixon, Katherine R; Lu, Tracy; Sell, Scott A

2017-10-15

The extracellular matrix is fundamental in providing an appropriate environment for cell interaction and signaling to occur. Replicating such a matrix is advantageous in the support of tissue ingrowth and regeneration through the field of tissue engineering. While scaffolds can be fabricated in many ways, cryogels have recently become a popular approach due to their macroporous structure and durability. Produced through the crosslinking of gel precursors followed by a subsequent controlled freeze/thaw cycle, the resulting cryogel provides a unique, sponge-like structure. Therefore, cryogels have proven advantageous for many tissue engineering applications including roles in bioreactor systems, cell separation, and scaffolding. Specifically, the matrix has been demonstrated to encourage the production of various molecules, such as antibodies, and has also been used for cryopreservation. Cryogels can pose as a bioreactor for the expansion of cell lines, as well as a vehicle for cell separation. Lastly, this matrix has shown excellent potential as a tissue engineered scaffold, encouraging regrowth at numerous damaged tissue sites in vivo. This review will briefly discuss the fabrication of cryogels, with an emphasis placed on their application in various facets of tissue engineering to provide an overview of this unique scaffold's past and future roles. Cryogels are unique scaffolds produced through the controlled freezing and thawing of a polymer solution. There is an ever-growing body of literature that demonstrates their applicability in the realm of tissue engineering as extracellular matrix analogue scaffolds; with extensive information having been provided regarding the fabrication, porosity, and mechanical integrity of the scaffolds. Additionally, cryogels have been reviewed with respect to their role in bioseparation and as cellular incubators. This all-inclusive view of the roles that cryogels can play is critical to advancing the technology and expanding its

Review of methods for the integration of reliability and design engineering

International Nuclear Information System (INIS)

Reilly, J.T.

1978-03-01

A review of methods for the integration of reliability and design engineering was carried out to establish a reliability program philosophy, an initial set of methods, and procedures to be used by both the designer and reliability analyst. The report outlines a set of procedures which implements a philosophy that requires increased involvement by the designer in reliability analysis. Discussions of each method reviewed include examples of its application

Crisis Communication (Handbooks of Communication Science Vol. 23)

DEFF Research Database (Denmark)

Johansen, Winni

Vol. 23 - The Handbook of Communication Science General editors: Peter J. Schultz and Paul Cobley......Vol. 23 - The Handbook of Communication Science General editors: Peter J. Schultz and Paul Cobley...

Book Review | Oloyede | African Sociological Review / Revue ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 12, No 1 (2008) >. Log in or Register to get access to full text downloads.

Training in software used by practising engineers should be included in university curricula

Science.gov (United States)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors

Applications of artificial intelligence in engineering problems. Vol. 1 and 2. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Sriram, D; Adey, R [eds.

1986-01-01

The purpose of the first international conference on the application of AI to engineering problems is to provide a forum for engineers all over the world to present their work on these applications. The interest being shown in the engineering community is evident by the large number of papers from the conference that are compiled into these volumes. The topics span various engineering disciplines. These topics are grouped into the following categories: - Knowledge representation and acquisition. Robotics. Natural language processing. Inexact inference techniques. General design methodologies. Constraints. Design strategies specific to a particular domain. Diagnostic systems. Intelligent front ends. Tools and techniques for building expert systems. Most of the papers deal with knowledge-based expert systems. In addition to the regular sessions, two sessions discussing a number of ongoing projects were also included in the conference. A panel on the future of AI in the engineering industry and another panel on networking were scheduled. Distinguished invited speakers from academia and industry presented lectures on their experiences with the application of AI.

Passive Techniques for Fan Noise Reduction in New Turbofan Engines: Review

Directory of Open Access Journals (Sweden)

M.Gorj-Bandpy

2013-03-01

Full Text Available Among the various environmental concerns, the aircraft noise item has been constantly growing in importance over the past years. Measures for its reduction at the source as well its mitigation around airports must take into account aspects of medicine and technical design as well as legal and land use planning aspects. Fan noise is one of the principal noise sources in turbofan aero-engines. In this paper a review of the main technologies employed for the reduction of fan noise turbofan engines is presented.

Effects of antioxidant additives on engine performance and exhaust emissions of a diesel engine fueled with canola oil methyl ester–diesel blend

International Nuclear Information System (INIS)

İleri, Erol; Koçar, Günnur

2013-01-01

Highlights: • BHA, BHT, TBHQ, EHN synthetic antioxidants were employed in the study. • Antioxidant additives are a promising candidate for improving cetane number, oxidation stability and decreasing NO x emissions • Cetane number improving efficiency of the antioxidants was ordered as EHN>BHA>BHT>TBHQ. • Formation of CO emissions has been increased with addition of each of the antioxidants to B20. - Abstract: An experimental investigation has been carried out to analyze the effect of antioxidants on engine performance and exhaust emissions of a diesel engine fueled with B20 (20 vol.% canola oil methyl ester and 80 vol.% diesel fuel blend). The four synthetic antioxidants, butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), tert-butylhydroquinone (TBHQ) and 2-ethylhexyl nitrate (EHN), were tested on a Land Rover turbocharged direct injection (TDI) 110 type diesel engine with water cooled, 4-cycl and 4-cylinder. The addition of antioxidants to B20 did not cause any negative effect on basic fuel properties of B20. According to engine performance test results, brake specific fuel consumption (BSFC) of B20 with antioxidants decreased compared to those of B20 without antioxidants. A 1000 ppm concentration of TBHQ was optimal as BSFC values were considerably reduced (10.19%) in the whole engine speeds when compared to B20. EHN antioxidant with B20 presented the best mean oxides of nitrogen (NO x ) with a reduction of 4.63%. However, formation of carbon monoxide (CO) emissions has been increased with addition of each of the antioxidants to B20

Durability Testing of Biomass Based Oxygenated Fuel Components in a Compression Ignition Engine

Energy Technology Data Exchange (ETDEWEB)

Ratcliff, Matthew A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); McCormick, Robert L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgardner, Marc E. [Gonzaga University; Lakshminarayanan, Arunachalam [Colorado State University; Olsen, Daniel B. [Colorado State University; Marchese, Anthony J. [Colorado State University

2017-10-18

Blending cellulosic biofuels with traditional petroleum-derived fuels results in transportation fuels with reduced carbon footprints. Many cellulosic fuels rely on processing methods that produce mixtures of oxygenates which must be upgraded before blending with traditional fuels. Complete oxygenate removal is energy-intensive and it is likely that such biofuel blends will necessarily contain some oxygen content to be economically viable. Previous work by our group indicated that diesel fuel blends with low levels (<4%-vol) of oxygenates resulted in minimal negative effects on short-term engine performance and emissions. However, little is known about the long-term effects of these compounds on engine durability issues such as the impact on fuel injection, in-cylinder carbon buildup, and engine oil degradation. In this study, four of the oxygenated components previously tested were blended at 4%-vol in diesel fuel and tested with a durability protocol devised for this work consisting of 200 hrs of testing in a stationary, single-cylinder, Yanmar diesel engine operating at constant load. Oil samples, injector spray patterns, and carbon buildup from the injector and cylinder surfaces were analyzed. It was found that, at the levels tested, these fuels had minimal impact on the overall engine operation, which is consistent with our previous findings.

Genotoxicity of metal based engineered nanoparticles in aquatic organisms: A review

CSIR Research Space (South Africa)

Mahaye, Ntombikayise

2017-07-01

Full Text Available Engineered nanoparticles (ENPs) are an emerging class of environmental contaminants, but are generally found in very low concentrations and are therefore likely to exert sub-lethal effects on aquatic organisms. In this review, we: (i) highlight key...

Nanocarbons in Electrospun Polymeric Nanomats for Tissue Engineering: A Review

Directory of Open Access Journals (Sweden)

Roberto Scaffaro

2017-02-01

Full Text Available Electrospinning is a versatile process technology, exploited for the production of fibers with varying diameters, ranging from nano- to micro-scale, particularly useful for a wide range of applications. Among these, tissue engineering is particularly relevant to this technology since electrospun fibers offer topological structure features similar to the native extracellular matrix, thus providing an excellent environment for the growth of cells and tissues. Recently, nanocarbons have been emerging as promising fillers for biopolymeric nanofibrous scaffolds. In fact, they offer interesting physicochemical properties due to their small size, large surface area, high electrical conductivity and ability to interface/interact with the cells/tissues. Nevertheless, their biocompatibility is currently under debate and strictly correlated to their surface characteristics, in terms of chemical composition, hydrophilicity and roughness. Among the several nanofibrous scaffolds prepared by electrospinning, biopolymer/nanocarbons systems exhibit huge potential applications, since they combine the features of the matrix with those determined by the nanocarbons, such as conductivity and improved bioactivity. Furthermore, combining nanocarbons and electrospinning allows designing structures with engineered patterns at both nano- and microscale level. This article presents a comprehensive review of various types of electrospun polymer-nanocarbon currently used for tissue engineering applications. Furthermore, the differences among graphene, carbon nanotubes, nanodiamonds and fullerenes and their effect on the ultimate properties of the polymer-based nanofibrous scaffolds is elucidated and critically reviewed.

A Systematic Literature Review of Engineering Identity: Definitions, Factors, and Interventions Affecting Development, and Means of Measurement

Science.gov (United States)

Morelock, John R.

2017-01-01

Studies exploring what it means to be an engineer professionally have been conducted for decades, but have boomed in recent years. This systematic literature review aims to organise extant studies on engineering identity by coding around four key variables: (a) definitions of engineering identity, (b) factors affecting engineering identity…

Wolsong 2, 3, and 4 quarterly progress review report on NSSS design and engineering

Energy Technology Data Exchange (ETDEWEB)

Jung, Sung Hoon; Kim, Sun Kee; Park, Tae Keun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-01-01

This is the Quarterly Progress Review Report for Wolsong NPP 2, 3 and 4 NSSS Design and Engineering which evaluates the performance of the project and describes the project highlight, manpower loading status, design and engineering and project related meetings by quarterly basis. 29 figs., 16 tabs. (Author).

Book Review: "Food and Development" | Hewitson | African Review ...

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 1 (2012) >. Log in or Register to get access to full text downloads.

Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions

International Nuclear Information System (INIS)

Roberts, Andrew; Brooks, Richard; Shipway, Philip

2014-01-01

Highlights: • The sources of I.C. engine cold start efficiency are reviewed and quantified. • Potential solutions are reviewed and the benefit quantified together. • Potential conflicts between different engine sub-systems are discussed. • Fuel consumption benefits of up to 7% are observed during cold start. • Emission reductions of up to 40% during cold start are observed. - Abstract: Legislation on vehicle emissions continues to become more stringent in an effort to minimise the impact of internal combustion engines on the environment. One area of significant concern in this respect is that of the cold-start; the thermal efficiency of the internal combustion engine is significantly lower at cold-start than when the vehicle reaches steady state temperatures owing to sub-optimal lubricant and component temperatures. The drive for thermal efficiency (of both the internal combustion engine and of the vehicle as a whole) has led to a variety of solutions being trialled to assess their merits and effects on other vehicle systems during this warm-up phase (and implemented where appropriate). The approaches have a common theme of attempting to reduce energy losses so that systems and components reach their intended operating temperature range as soon as possible after engine start. In the case of the engine, this is primarily focused on the lubricant system. Lubricant viscosity is highly sensitive to temperature and the increased viscosity at low temperatures results in higher frictional and pumping losses than would be observed at the target operating temperature. The approaches used to tackle the problem include the use of phase change materials (to reduce the cool-down rate during a period following engine running) [1,2] and the use of thermal barrier coatings in an attempt to insulate the cylinder bore and prevent heat loss (thus increasing the amount of energy utilised as brake work [3]). A range of system alterations have also been trialled including

Using Software Product Line to improve ERP Engineering: Literature Review and Analysis

Directory of Open Access Journals (Sweden)

Raúl Mazo

2014-10-01

Full Text Available On the one hand, getting advantages of Enterprise Resource Planning (ERP systems largely depends on their capacity to be configured and adapted to fit the customer and domain requirements. On the other hand, product line engineering (PLE is a promising approach for configuring and adapting products by means of configuration and derivation processes. While the literature and industrial experiences show the benefits of PLE methods, techniques and tools, there is still a lack of interest in addressing ERP engineering issues with the product line strategy. Objective: The aim of this paper is to identify and analyze the different ways presented in the literature to improve ERP engineering issues with the methods, techniques and tools provided by PLE. Method: To achieve that objective, we reviewed the literature and analyzed available publications. Results: This literature review analyzes six research papers at the intersection between ERP and PLE. It shows that the product line strategy can indeed be applied for ERP configuration and customization. It further shows the evolving interest on this topic and discusses existing contributions.

Ecotoxicity of engineered nanoparticles to aquatic invertebrates: a brief review and recommendations for future toxicity testing

DEFF Research Database (Denmark)

Baun, Anders; Hartmann, Nanna Isabella Bloch; Grieger, Khara Deanne

2008-01-01

Based on a literature review and an overview of toxic effects of engineered nanoparticles in aquatic invertebrates, this paper proposes a number of recommendations for the developing field of nanoecotoxicology by highlighting the importance of invertebrates as sensitive and relevant test organisms...... through standardized short-term (lethality) tests with invertebrates as a basis for investigating behaviour and bioavailability of engineered nanoparticles in the aquatic environment. Based on this literature review, we further recommend that research is directed towards invertebrate tests employing long....... Results show that there is a pronounced lack of data in this field (less than 20 peer-reviewed papers are published so far), and the most frequently tested engineered nanoparticles in invertebrate tests are C-60, carbon nanotubes, and titanium dioxide. In addition, the majority of the studies have used...

The Use of Motivation Theory in Engineering Education Research: A Systematic Review of Literature

Science.gov (United States)

Brown, Philip R.; McCord, Rachel E.; Matusovich, Holly M.; Kajfez, Rachel L.

2015-01-01

Motivation is frequently studied in the context of engineering education. However, the use of the term motivation can be inconsistent, both in how clearly it is defined and in how it is implemented in research designs and practice. This systematic literature review investigates the use of motivation across recent engineering education…

Systems Engineering Leadership Development: Advancing Systems Engineering Excellence

Science.gov (United States)

Hall, Phil; Whitfield, Susan

2011-01-01

This slide presentation reviews the Systems Engineering Leadership Development Program, with particular emphasis on the work being done in the development of systems engineers at Marshall Space Flight Center. There exists a lack of individuals with systems engineering expertise, in particular those with strong leadership capabilities, to meet the needs of the Agency's exploration agenda. Therefore there is a emphasis on developing these programs to identify and train systems engineers. The presentation reviews the proposed MSFC program that includes course work, and developmental assignments. The formal developmental programs at the other centers are briefly reviewed, including the Point of Contact (POC)

Continuing pain education in nursing: a literature review.

NARCIS (Netherlands)

Francke, A.L.; Garssen, B.; Huijer Abu-Saad, H.

1996-01-01

Twelve studies on the effects of pain programmes for nurses were reviewed. Most of the programmes focused on aspects of pain, pain medication or pain assessment. Only two programmes (Ferrell et al., 1993, J. Pain Symptom Management, Vol. 8, No. 8, pp. 549-556; Sofaer, 1983, Nurs. Times, Vol. 79, No.

Plants and Humans in the Near East and the Caucasus: Ancient and Traditional Uses of Plants as Food and Medicine, a Diachronic Ethnobotanical Review

Directory of Open Access Journals (Sweden)

Naomi F. Miller

2014-02-01

Full Text Available Review of Plants and Humans in the Near East and the Caucasus: Ancient and Traditional Uses of Plants as Food and Medicine, a Diachronic Ethnobotanical Review (2 vols. Vol. 1: The Landscapes. The Plants: Ferns and Gymnosperms. Vol. 2: The Plants: Angiosperms. Diego Rivera Núñez, Gonzalo Matilla Séiquer, Concepción Obón, Francisco Alcaraz Ariza. 2011. Ediciones de la Unverisdad de Murcia. Pp. 1056. EUR 23.76 (paperback. ISBN 978-84-15463-07-08 (2 vols., 978-84-15463-05-4 (vol. 1, 978-84-15463-06-1 (vol. 2.

Soil-structure interaction Vol.3. Influence of ground water

Energy Technology Data Exchange (ETDEWEB)

Costantino, C J

1986-04-01

This study has been performed for the Nuclear Regulatory Commission (NRC) by the Structural Analysis Division of Brookhaven National Laboratory (BNL). The study was conducted during the fiscal year 1965 on the program entitled 'Benchmarking of Structural Engineering Problems' sponsored by NRC. The program considered three separate but complementary problems, each associated with the soil-structure interaction (551) phase of the seismic response analysis of nuclear plant facilities. The reports, all entitled Soil-Structure Interaction, are presented in three separate volumes, namely: Vol. 1 Influence of Layering by AJ Philippacopoulos, Vol. 2 Influence of Lift-Off by C.A. Miller, Vol. 3 Influence of Ground Water by C.J. Costantino. The two problems presented in Volumes 2 and 3 were conducted at the City University of New York (CUNY) under subcontract to BNL. This report, Volume 3 of the report, presents a summary of the first year's effort on the subject of the influence of foundation ground water on the SSI phenomenon. A finite element computer program was developed for the two-phased formulation of the combined soil-water problem. This formulation is based on the Biot dynamic equations of motion for both the solid and fluid phases of a typical soil. Frequency dependent interaction coefficients were generated for the two-dimensional plane problem of a rigid surface footing moving against a saturated linear soil. The results indicate that interaction coefficients are significantly modified as compared to the comparable values for a dry soil, particularly for the rocking mode of response. Calculations were made to study the impact of the modified interaction coefficients on the response of a typical nuclear reactor building. The amplification factors for a stick model placed atop a dry and saturated soil were computed. It was found that pore water caused the rocking response to decrease and translational response to increase over the frequency range of interest, as

Advances in boundary elements. Vol. 1-3

International Nuclear Information System (INIS)

Brebbia, C.A.; Connor, J.J.

1989-01-01

This book contains some of the edited papers presented at the 11th Boundary Element Conference, held in Cambridge, Massachusetts, during August 1989. The papers are arranged in three different books comprising the following topics: Vol. 1: Computations and Fundamentals - comprises sections on fundamentals, adaptive techniques, error and convergence, numerical methods and computational aspects. (283 p.). Vol. 2: Field and fluid flow solutions - includes the following topics: potential problems, thermal studies, electrical and electromagnetic problems, wave propagation, acoustics and fluid flow. (484 p.). Vol. 3: Stress analysis - deals with advances in linear problems, nonlinear problems, fracture mechanics, contact mechanics, optimization, geomechanics, plates and shells, vibrations and industrial applications. (450 p). (orig./HP)

Review

Indian Academy of Sciences (India)

Review. J. Astrophys. Astr., Vol. 36, No. 4, December 2015, pp. 623–634 ..... 4000 K ≤ T ≤ 10000 K. The processes (1b) are characterized in this paper via ..... Mihajlov, A. A., Sreckovic, V. A., Ignjatovic, L. M., Klyucharev, A. N. 2012, J. Cluster.

Engineering - a key aspect of the UK nuclear policy review

International Nuclear Information System (INIS)

Bindon, J.L.; Butcher, Sally

1993-01-01

In anticipation of the forthcoming nuclear review, a forum on issues relevant to the industry was held at the Institution of Electrical Engineers HQ in London, in association with the Institute of Energy and the Watt Committee on Energy. The forum was divided into five sections, dealing with energy policy, the environment, industry, economics and safety. (author)

Using game engine for 3D terrain visualisation of GIS data: A review

Science.gov (United States)

Che Mat, Ruzinoor; Shariff, Abdul Rashid Mohammed; Nasir Zulkifli, Abdul; Shafry Mohd Rahim, Mohd; Hafiz Mahayudin, Mohd

2014-06-01

This paper reviews on the 3D terrain visualisation of GIS data using game engines that are available in the market as well as open source. 3D terrain visualisation is a technique used to visualise terrain information from GIS data such as a digital elevation model (DEM), triangular irregular network (TIN) and contour. Much research has been conducted to transform the 2D view of map to 3D. There are several terrain visualisation softwares that are available for free, which include Cesium, Hftool and Landserf. This review paper will help interested users to better understand the current state of art in 3D terrain visualisation of GIS data using game engines.

Using game engine for 3D terrain visualisation of GIS data: A review

International Nuclear Information System (INIS)

Mat, Ruzinoor Che; Zulkifli, Abdul Nasir; Mahayudin, Mohd Hafiz; Shariff, Abdul Rashid Mohammed; Rahim, Mohd Shafry Mohd

2014-01-01

This paper reviews on the 3D terrain visualisation of GIS data using game engines that are available in the market as well as open source. 3D terrain visualisation is a technique used to visualise terrain information from GIS data such as a digital elevation model (DEM), triangular irregular network (TIN) and contour. Much research has been conducted to transform the 2D view of map to 3D. There are several terrain visualisation softwares that are available for free, which include Cesium, Hftool and Landserf. This review paper will help interested users to better understand the current state of art in 3D terrain visualisation of GIS data using game engines

Book Review | Sheridan | African Review of Economics and Finance

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 1 (2016) >. Log in or Register to get access to full text downloads.

Book Review | Kalu | African Review of Economics and Finance

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 1 (2016) >. Log in or Register to get access to full text downloads.

Geotechnical engineering considerations in the NRC's review of uranium mill tailings remedial action plans

International Nuclear Information System (INIS)

Gillen, D.M.

1985-01-01

To reduce potential health hazards associated with inactive uranium mill tailings sites, the Department of Energy (DOE) is presently investigating and implementing remedial actions at 24 sites in the Uranium Mill Tailings Remedial Action Program (UMTRAP). All remedial actions must be selected and performed with the concurrence of the Nuclear Regulatory Commission (NRC). This paper provides a discussion of geotechnical engineering considerations during the NRC's preconcurrence review of proposed remedial action plans. In order for the NRC staff to perform an adequate geotechnical engineering review, DOE documents must contain a presentation of the properties and stability of all in-situ and engineered soil and rock which may affect the ability of the remedial action plans to meet EPA standards for long-term stability and control. Site investigations, laboratory testing, and remedial action designs must be adequate in scope and technique to provide sufficient data for the NRC staff to independently evaluate static and dynamic stability, settlement, radon attenuation through the soil cover, durability of rock for erosion protection, and other geotechnical engineering factors

Invited Review. Combustion instability in spray-guided stratified-charge engines. A review

Energy Technology Data Exchange (ETDEWEB)

Fansler, Todd D. [Univ. of Wisconsin, Madison, WI (United States); Reuss, D. L. [Univ. of Michigan, Ann Arbor, MI (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sick, V. [Univ. of Michigan, Ann Arbor, MI (United States); Dahms, R. N. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2015-02-02

Our article reviews systematic research on combustion instabilities (principally rare, random misfires and partial burns) in spray-guided stratified-charge (SGSC) engines operated at part load with highly stratified fuel -air -residual mixtures. Results from high-speed optical imaging diagnostics and numerical simulation provide a conceptual framework and quantify the sensitivity of ignition and flame propagation to strong, cyclically varying temporal and spatial gradients in the flow field and in the fuel -air -residual distribution. For SGSC engines using multi-hole injectors, spark stretching and locally rich ignition are beneficial. Moreover, combustion instability is dominated by convective flow fluctuations that impede motion of the spark or flame kernel toward the bulk of the fuel, coupled with low flame speeds due to locally lean mixtures surrounding the kernel. In SGSC engines using outwardly opening piezo-electric injectors, ignition and early flame growth are strongly influenced by the spray's characteristic recirculation vortex. For both injection systems, the spray and the intake/compression-generated flow field influence each other. Factors underlying the benefits of multi-pulse injection are identified. Finally, some unresolved questions include (1) the extent to which piezo-SGSC misfires are caused by failure to form a flame kernel rather than by flame-kernel extinction (as in multi-hole SGSC engines); (2) the relative contributions of partially premixed flame propagation and mixing-controlled combustion under the exceptionally late-injection conditions that permit SGSC operation on E85-like fuels with very low NO_x and soot emissions; and (3) the effects of flow-field variability on later combustion, where fuel-air-residual mixing within the piston bowl becomes important.

Global Journal of Engineering Research - Vol 14, No 1 (2015)

African Journals Online (AJOL)

Compressive and flexural strength of cement mortar stabilized with raffia palm fruit ... Effect of compactive effort on strength indices of laterite treated with calcium ... Engineering properties of scoria concrete as a construction material · EMAIL ...

Multiple Learning Strategies Project. Small Engine Repair Service. Regular Vocational. [Vol. 1.

Science.gov (United States)

Pitts, Jim; And Others

This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-four learning modules organized into ten units: engine block; air cleaner; starters; fuel tanks; lines, filters, and pumps; carburetors; electrical; magneto systems;…

Combustion phenomenon, performance and emissions of a diesel engine with aviation turbine JP-8 fuel and rapeseed biodiesel blends

International Nuclear Information System (INIS)

Labeckas, Gvidonas; Slavinskas, Stasys

2015-01-01

Highlights: • The 5 vol% RME added to JP-8 fuel improved lubricity 1.7 times according corrected wear scar diameter, μm. • The reverse trends revealed in the autoignition delay when operating with identical fuel blends J10 and B10. • The brake thermal efficiency increased by 1.0–3.6% when running on bio-fuels J5–J30 at speed of 2200 rpm. • The NO_x emissions increased by 5.2% when operating on bio-jet fuel J30 at full load and speed of 2200 rpm. • CO, HC emissions and smoke decreased with biofuel J20 and higher blends at both speeds of 1400 and 2200 rpm. - Abstract: The article presents the test results of an engine operating with diesel fuel (B5), turbine type JP-8 fuel and its 5 vol%, 10 vol%, 20 vol%, and 30 vol% blends with rapeseed oil methyl ester (RME). Additional fuel blend B10 was prepared by pouring 10 vol% of RME to diesel fuel to extend interpretation of the test results. The purpose of this study was to examine the effects of using jet-biodiesel fuel blends J5, J10, J20, J30, and B10 on the start of injection, ignition delay, combustion history, heat release, engine performance, and exhaust emissions. The engine performance parameters were examined at light 15% (1400 rpm) and 10% (2200 rpm), medium 50%, and high 100% loads and the two speeds: 1400 rpm at which maximum torque occurs and a rated speed of 2200 rpm. The autoignition delay and maximum heat release rate decreased, maximum cylinder pressure, and pressure gradients increased, whereas brake specific fuel consumption changed little and brake thermal efficiency was 1.0–3.6% higher when running with fuel blends J5 to J30 at rated speed compared with the data measured with neat jet fuel. The NO_x emissions increased slightly, but the CO, THC emissions, and smoke opacity boosted up significantly when using jet fuel blend J10 with a smooth reduction of unburned hydrocarbons for jet-biodiesel fuel blends with higher CN ratings. Operation at a full (100%) load with fuel blend J10

Continuing Medical Education - Vol 27, No 1 (2009)

African Journals Online (AJOL)

Continuing Medical Education - Vol 27, No 1 (2009). Journal Home > Archives > Vol 27, No 1 (2009). Log in or Register to get access to full text downloads. ... Addiction treatment · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. R Meyer ...

Review on pressure swirl injector in liquid rocket engine

Science.gov (United States)

Kang, Zhongtao; Wang, Zhen-guo; Li, Qinglian; Cheng, Peng

2018-04-01

The pressure swirl injector with tangential inlet ports is widely used in liquid rocket engine. Commonly, this type of pressure swirl injector consists of tangential inlet ports, a swirl chamber, a converging spin chamber, and a discharge orifice. The atomization of the liquid propellants includes the formation of liquid film, primary breakup and secondary atomization. And the back pressure and temperature in the combustion chamber could have great influence on the atomization of the injector. What's more, when the combustion instability occurs, the pressure oscillation could further affects the atomization process. This paper reviewed the primary atomization and the performance of the pressure swirl injector, which include the formation of the conical liquid film, the breakup and atomization characteristics of the conical liquid film, the effects of the rocket engine environment, and the response of the injector and atomization on the pressure oscillation.

Journal of Applied Science, Engineering and Technology - Vol 2, No ...

African Journals Online (AJOL)

A simple simulation software for effective four-stroke engine instruction · EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. OO Jeje, 19-25. http://dx.doi.org/10.4314/jaset.v2i1.38260 ...

International Journal of Humanistic Studies - Vol 3 (2004)

African Journals Online (AJOL)

International Journal of Humanistic Studies - Vol 3 (2004). Journal Home > Archives > Vol 3 (2004). Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. DOWNLOAD FULL TEXT ...

African Review of Economics and Finance: Submissions

African Journals Online (AJOL)

The African Review of Economics and Finance is a peer-reviewed, scholarly ... financial markets and institutions, asset pricing, forecasting, impact of culture and ... In: Friedman BM, Hahn FH (Eds), Handbook of monetary economics, vol.1.

Evaluation of Capacity on a High Throughput Vol-oxidizer for Operability

International Nuclear Information System (INIS)

Kim, Young Hwan; Park, Geun Il; Lee, Jung Won; Jung, Jae Hoo; Kim, Ki Ho; Lee, Yong Soon; Lee, Do Youn; Kim, Su Sung

2010-01-01

KAERI is developing a pyro-process. As a piece of process equipment, a high throughput vol-oxidizer which can handle a several tens kg HM/batch was developed to supply U 3 O 8 powders to an electrolytic reduction(ER) reactor. To increase the reduction yield, UO 2 pellets should be converted into uniform powders. In this paper, we aim at the evaluation of a high throughput vol-oxidizer for operability. The evaluation consisted of 3 targets, a mechanical motion test, a heating test and hull separation test. In order to test a high throughput vol-oxidizer, By using a control system, mechanical motion tests of the vol-oxidizer were conducted, and heating rates were analyzed. Also the separation tests of hulls for recovery rate were conducted. The test results of the vol-oxidizer are going to be applied for operability. A study on the characteristics of the volatile gas produced during a vol-oxidation process is not included in this study

Dynamics of structures '89. Vol. 3

International Nuclear Information System (INIS)

1989-01-01

The proceedings, comprising 3 volumes published by the Plzen Centre of the Czechoslovak Society for Science and Technology (Vol. 1 and 2) and by Skoda Works in Plzen (Vol. 3), contain 107 papers, out of which 8 fall within the INIS Subject Scope; these deal with problems related to the earthquake resistance of nuclear power plants. Attention is paid to the evaluation of seismic characteristics of nuclear power plant equipment, to the equipment testing and to calculations of its dynamic characteristics under simulated seismic stress. (Z.M.)

ERG [Engineering Review Group] and GRG [Geologic Review Group] review of the horizontal versus vertical modes of waste emplacement at the Deaf Smith County site, Texas

International Nuclear Information System (INIS)

Chytrowski, B.R.

1988-01-01

The Engineering Review Group (ERG) and Geologic Review Group (GRG) were established by the Office of Nuclear Waste Isolation (ONWI) to help evaluate specific issues in the US Department of Energy's nuclear waste repository program. The December 1985 meeting and the February 1986 meeting dealt with the evaluation of the Fluor Technology, Inc., architect-engineer recommendation of the horizontal mode of waste package emplacement for the Site Characterization Plan Conceptual Design Report (SCP-CDR). The ONWI recommendation regarding horizontal and vertical modes of waste package emplacement and associated studies was reviewed. This report documents the ERG and GRG's comments and recommendations on this subject and ONWI responses to the specific points raised by these groups. The ERG and GRG joint review groups concurred with ONWI recommendations that additional studies are required in order to reach a decision on the method of emplacement to be used. In the opinion of these groups, both methods can be implemented; however, should the decision be reached today the vertical mode would be preferred

A simple simulation software for effective four-stroke engine instruction

African Journals Online (AJOL)

No Abstract. Journal of Applied Science, Engineering and Technology Vol. 2(1) 2002: 19-25. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/jaset.v2i1.38260 · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

Effect of EGR on a sationary VCR diesel engine using cottonseed biodiesel (B20 fuel

Directory of Open Access Journals (Sweden)

Nitin M. Sakhare

2016-09-01

Full Text Available This paper presents a view on comparative study of use of diesel fuel with B20 biodieselblend (Diesel (80 %, by vol. and Cotton seed oil (20 %, by vol. derived from Cotton seeds. As higher NOx emission and higher brake specific fuel consumption are main challenges for effective utilization of biodiesel fuel in a diesel engine, there is alarming need to find out the long term solution to reduce NOx emission for better utilization of biodiesel fuel in a diesel engine. Exhaust gas recirculation (EGR is one of the useful technologies to reduce the NOx emission of a diesel engine. In the present research work test is conducted on 3 KW single cylinder, four stroke, water cooled, variable compression ratio (VCR computerized diesel engine using diesel and B20 cotton seed biodiesel blend to study the effect of exhaust gas recirculation on performance and emissions characteristics of a diesel engine in terms of fuel consumption, thermal efficiency and emissions such as hydrocarbon (HC, carbon monoxide (CO, oxides of nitrogen (NOx and carbon dioxide (CO2 of a diesel engine. The constant engine speed of 1500 rpm was maintained through-out the experiment test. The exhaust gas recirculation was varied as 4 % and 6 % at different loading conditions with diesel and B20 biodiesel. The results show that the significant reduction in oxides of nitrogen (NOx with 4 % and 6 % EGR for B20 whereas marginal increment in CO and HC emissions.

Cell Factory Engineering

DEFF Research Database (Denmark)

Davy, Anne Mathilde; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

2017-01-01

focused on individual strategies or cell types, but collectively they fall under the broad umbrella of a growing field known as cell factory engineering. Here we condense >130 reviews and key studies in the art into a meta-review of cell factory engineering. We identified 33 generic strategies......-review provides general strategy guides for the broad range of applications of rational engineering of cell factories....

A review of evolution of electrospun tissue engineering scaffold: From two dimensions to three dimensions.

Science.gov (United States)

Ngadiman, Nor Hasrul Akhmal; Noordin, M Y; Idris, Ani; Kurniawan, Denni

2017-07-01

The potential of electrospinning process to fabricate ultrafine fibers as building blocks for tissue engineering scaffolds is well recognized. The scaffold construct produced by electrospinning process depends on the quality of the fibers. In electrospinning, material selection and parameter setting are among many factors that contribute to the quality of the ultrafine fibers, which eventually determine the performance of the tissue engineering scaffolds. The major challenge of conventional electrospun scaffolds is the nature of electrospinning process which can only produce two-dimensional electrospun mats, hence limiting their applications. Researchers have started to focus on overcoming this limitation by combining electrospinning with other techniques to fabricate three-dimensional scaffold constructs. This article reviews various polymeric materials and their composites/blends that have been successfully electrospun for tissue engineering scaffolds, their mechanical properties, and the various parameters settings that influence the fiber morphology. This review also highlights the secondary processes to electrospinning that have been used to develop three-dimensional tissue engineering scaffolds as well as the steps undertaken to overcome electrospinning limitations.

Organic Rankine cycle - review and research directions in engine applications

Science.gov (United States)

Panesar, Angad

2017-11-01

Waste heat to power conversion using Organic Rankine Cycles (ORC) is expected to play an important role in CO2 reductions from diesel engines. Firstly, a review of automotive ORCs is presented focusing on the pure working fluids, thermal architectures and expanders. The discussion includes, but is not limited to: R245fa, ethanol and water as fluids; series, parallel and cascade as architectures; dry saturated, superheated and supercritical as expansion conditions; and scroll, radial turbine and piston as expansion machines. Secondly, research direction in versatile expander and holistic architecture (NOx + CO2) are proposed. Benefits of using the proposed unconventional approaches are quantified using Ricardo Wave and Aspen HYSYS for diesel engine and ORC modelling. Results indicate that, the implementation of versatile piston expander tolerant to two-phase and using cyclopentane can potentially increase the highway drive cycle power by 8%. Furthermore, holistic architecture offering complete utilisation of charge air and exhaust recirculation heat increased the performance noticeably to 5% of engine power at the design point condition.

A Review of Modeling Bioelectrochemical Systems: Engineering and Statistical Aspects

Directory of Open Access Journals (Sweden)

Shuai Luo

2016-02-01

Full Text Available Bioelectrochemical systems (BES are promising technologies to convert organic compounds in wastewater to electrical energy through a series of complex physical-chemical, biological and electrochemical processes. Representative BES such as microbial fuel cells (MFCs have been studied and advanced for energy recovery. Substantial experimental and modeling efforts have been made for investigating the processes involved in electricity generation toward the improvement of the BES performance for practical applications. However, there are many parameters that will potentially affect these processes, thereby making the optimization of system performance hard to be achieved. Mathematical models, including engineering models and statistical models, are powerful tools to help understand the interactions among the parameters in BES and perform optimization of BES configuration/operation. This review paper aims to introduce and discuss the recent developments of BES modeling from engineering and statistical aspects, including analysis on the model structure, description of application cases and sensitivity analysis of various parameters. It is expected to serves as a compass for integrating the engineering and statistical modeling strategies to improve model accuracy for BES development.

Effect of water-containing acetone–butanol–ethanol gasoline blends on combustion, performance, and emissions characteristics of a spark-ignition engine

International Nuclear Information System (INIS)

Li, Yuqiang; Nithyanandan, Karthik; Lee, Timothy H.; Donahue, Robert Michael; Lin, Yilu; Lee, Chia-Fon; Liao, Shengming

2016-01-01

Highlights: • Water-containing ABE (acetone–butanol–ethanol) was used an alternative fuel. • Water-containing ABE and gasoline blends were investigated in an SI engine. • Water-containing ABE and gasoline blends can enhance engine torque. • Water-containing ABE and gasoline blends can reduce CO, UHC and NO_x emissions. - Abstract: Bio-butanol has proved to be a promising alternative fuel in recent years; it is typically produced from ABE (acetone–butanol–ethanol) fermentation from non-edible biomass feedstock. The high costs for dehydration and recovery from dilute fermentation broth have so far prohibited bio-butanol’s use in internal combustion engines. There is an interesting in studying the intermediate fermentation product, i.e. water-containing ABE as a potential fuel. However, most previous studies covered the use of water-containing ABE–diesel blends. In addition, previous studies on SI engines fueled with ABE did not consider the effect of water. Therefore, the evaluation of water-containing ABE gasoline blends in a port fuel-injected spark-ignition (SI) engine was carried out in this study. Effect of adding ABE and water into gasoline on combustion, performance and emissions characteristics was investigated by testing gasoline, ABE30, ABE85, ABE29.5W0.5 and ABE29W1 (29 vol.% ABE, 1 vol.% water and 70 vol.% gasoline). In addition, ABE29W1 was compared with gasoline under various equivalence ratios (Φ = 0.83–1.25) and engine loads (3 and 5 bar BMEP). It was found that ABE29W1 generally had higher engine toque (3.1–8.2%) and lower CO (9.8–35.1%), UHC (27.4–78.2%) and NO_x (4.1–39.4%) than those of gasoline. The study indicated that water-containing ABE could be used in SI engines as an alternative fuel with good engine performance and low emissions.

Satellite Data for All? Review of Google Earth Engine for Archaeological Remote Sensing

Directory of Open Access Journals (Sweden)

Omar A. Alcover Firpi

2016-11-01

Full Text Available A review of Google Earth Engine for archaeological remote sensing using satellite data. GEE is a freely accessible software option for processing remotely sensed data, part of the larger Google suite of products.

Archives: Mizan Law Review

African Journals Online (AJOL)

Items 1 - 21 of 21 ... Archives: Mizan Law Review. Journal Home > Archives: Mizan Law Review. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 21 of 21 Items. 2017. Vol 11, No 2 ...

Fast Reactor Physics. Vol. II. Proceedings of a Symposium on Fast Reactor Physics and Related Safety Problems

International Nuclear Information System (INIS)

1968-01-01

Proceedings of a Symposium organized by the IAEA and held in Karlsruhe, 30 October - 3 November 1967. The meeting was attended by 183 scientists from 23 countries and three international organizations. Contents: (Vol.1) Review of national programmes (5 papers); Nuclear data for fast reactors (12 papers); Experimental methods (3 papers); Zoned systems (7 papers); Kinetics (7 papers). (Vol.11) Fast critical experiments (8 papers); Heterogeneity in fast critical experiments (5 papers); Fast power reactors (13 papers); Fast pulsed reactors (3 papers); Panel discussion. Each paper is in its original language (50 English, 11 French and 3 Russian) and is preceded by an abstract in English with a second one in the original language if this is not English. Discussions are in English. (author)

Diesel engine exhaust gas recirculation--a review on advanced and novel concepts

Energy Technology Data Exchange (ETDEWEB)

Zheng Ming E-mail: mzheng@uwindsor.ca; Reader, Graham T.; Hawley, J. Gary

2004-04-01

Exhaust gas recirculation (EGR) is effective to reduce nitrogen oxides (NO{sub x}) from Diesel engines because it lowers the flame temperature and the oxygen concentration of the working fluid in the combustion chamber. However, as NO{sub x} reduces, particulate matter (PM) increases, resulting from the lowered oxygen concentration. When EGR further increases, the engine operation reaches zones with higher instabilities, increased carbonaceous emissions and even power losses. In this research, the paths and limits to reduce NO{sub x} emissions from Diesel engines are briefly reviewed, and the inevitable uses of EGR are highlighted. The impact of EGR on Diesel operations is analyzed and a variety of ways to implement EGR are outlined. Thereafter, new concepts regarding EGR stream treatment and EGR hydrogen reforming are proposed.

A review on chitosan centred scaffolds and their applications in tissue engineering.

Science.gov (United States)

Ahmed, Shakeel; Annu; Sheikh, Javed; Ali, Akbar

2018-05-03

The diversity and availability of biopolymer and increased clinical demand for safe scaffolds lead to an increased interest in fabricating scaffolds in order to achieve fruitful progress in tissue engineering. Due to biocompatibility, biodegradability, inherent antimicrobial character, chitosan has drawn ample consideration in recent years. Chitosan is a biopolymer obtained by de-acetylation of chitin extracted from shells of crustaceans and fungi. Due to the presence of reactive functionality in the molecular chain chitosan can be modified either chemically or physically to fabricate the tailor-made scaffolds having desired properties for tissue engineering centered applications. In this review chitosan, its properties and role either virgin, chemically or physically modified, 2D or 3D scaffolds for tissue engineering application have been highlighted. Copyright © 2017. Published by Elsevier B.V.

Lagos Historical Review - Vol 9 (2009)

African Journals Online (AJOL)

Book Review: "The Roots of African Conflicts: The Causes and Costs" · EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. IN Osemeka. http://dx.doi.org/10.4314/lhr.v9i1.48064 ...

Vol 41 No 2

African Journals Online (AJOL)

Esem

3 Centre for Primary Care Research. Medical Journal of Zambia, Vol. 41, No. 2: 59 - 64 (2014) ... pollutants by inhaling second-hand tobacco smoke are at risk of adverse health ..... To put the measured PM levels into perspective, a. 2.5. 5.

12-EEASA-Vol 22.indd

African Journals Online (AJOL)

jenny

2006-02-22

Feb 22, 2006 ... Southern African Journal of Environmental Education, Vol. .... To this end, a planning conference on environmental .... mathematics, physics, chemistry, biology, geography, agriculture, home economics and human and.

Mini-review: In vitro Metabolic Engineering for Biomanufacturing of High-value Products

Directory of Open Access Journals (Sweden)

Weihua Guo

Full Text Available With the breakthroughs in biomolecular engineering and synthetic biology, many valuable biologically active compound and commodity chemicals have been successfully manufactured using cell-based approaches in the past decade. However, because of the high complexity of cell metabolism, the identification and optimization of rate-limiting metabolic pathways for improving the product yield is often difficult, which represents a significant and unavoidable barrier of traditional in vivo metabolic engineering. Recently, some in vitro engineering approaches were proposed as alternative strategies to solve this problem. In brief, by reconstituting a biosynthetic pathway in a cell-free environment with the supplement of cofactors and substrates, the performance of each biosynthetic pathway could be evaluated and optimized systematically. Several value-added products, including chemicals, nutraceuticals, and drug precursors, have been biosynthesized as proof-of-concept demonstrations of in vitro metabolic engineering. This mini-review summarizes the recent progresses on the emerging topic of in vitro metabolic engineering and comments on the potential application of cell-free technology to speed up the “design-build-test” cycles of biomanufacturing. Keywords: Cell-free, Biosynthesis, Metabolic pathways, Design-build-test cycle

The Nuclear Review: the Institution of Nuclear Engineers' response to the Review of Nuclear Power

International Nuclear Information System (INIS)

Anon.

1994-01-01

The United Kingdom Government's Nuclear Review currently underway, addresses whether and in what form nuclear power should continue to be part of the country's power generation capability. This article sets out the response of the Institution of Nuclear Engineers to the Nuclear Review. This pro-nuclear group emphasises the benefits to be gained from diversity of generation in the energy supply industry. The environmentally benign nature of nuclear power is emphasised, in terms of gaseous emissions. The industry's excellent safety record also argues in favour of nuclear power. Finally, as power demand increases globally, a health U.K. nuclear industry could generate British wealth through power exports and via the construction industry. The Institution's view on radioactive waste management is also set out. (UK)

Southern African Business Review

African Journals Online (AJOL)

Southern African Business Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 20, No 1 (2016) >. Log in or Register to get access to full text downloads.

Review Article: A Review Of Adult Orthodontics – Role Of The ...

African Journals Online (AJOL)

Adjunctive and comprehensive orthodontic treatments are the main types of orthodontic therapy recommended for adult malocclusion. The orthodontic therapy and refer to the specialist appropriately. KEY WORDS: Review, Adult Orthodontics, General Dental Practitioner. Nigerian Journal of Clinical Practice Vol.7(1) 2004: ...

NRC Reviewer Aid for Evaluating the Human Factors Engineering Aspects of Small Modular Reactors

International Nuclear Information System (INIS)

OHara, J.M.; Higgins, J.C.

2012-01-01

Small modular reactors (SMRs) are a promising approach to meeting future energy needs. Although the electrical output of an individual SMR is relatively small compared to that of typical commercial nuclear plants, they can be grouped to produce as much energy as a utility demands. Furthermore, SMRs can be used for other purposes, such as producing hydrogen and generating process heat. The design characteristics of many SMRs differ from those of current conventional plants and may require a distinct concept of operations (ConOps). The U.S. Nuclear Regulatory Commission (NRC) conducted research to examine the human factors engineering (HFE) and the operational aspects of SMRs. The research identified thirty potential human-performance issues that should be considered in the NRC's reviews of SMR designs and in future research activities. The purpose of this report is to support NRC HFE reviewers of SMR applications by identifying some of the questions that can be asked of applicants whose designs have characteristics identified in the issues. The questions for each issue were identified and organized based on the review elements and guidance contained in Chapter 18 of the Standard Review Plan (NUREG-0800), and the Human Factors Engineering Program Review Model (NUREG-0711).

Global Journal of Engineering Research - Vol 6, No 2 (2007)

African Journals Online (AJOL)

The effect of spark-plug location on Nox and VOC emissions in a single cylinder two-store Si engine using blend fuel · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. F I Abam, A Kuhe, M I Ofem, 79-82. http://dx.doi.org/10.4314/gjer.v6i2.18951 ...

Role of plant biotechnology and genetic engineering in crop-improvement, with special emphases on cotton: A review

International Nuclear Information System (INIS)

Akhtar, L.H.; Siddiq, S.Z.; Tariq, A.H.; Arshad, M.; Gorham, J.

2003-01-01

Plant biotechnology and genetic engineering offer novel approaches to plant-breeding, production, propagation and preservation of germplasm. In this manuscript, the population and food-requirements of Pakistan, role of biotechnology and genetic engineering in crop-improvement, along with potential uses in cotton, have been discussed. The latest position of plant biotechnology and genetic engineering in Pakistan and the advantages of biotechnology and genetic-engineering techniques over conventional plant-breeding techniques, along with critical views of various scientists have been reviewed. (author)

Review of energy policy. Vol. 1. A discussion paper; Vol. 2. Appendices

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

Following the accident at the Chernobyl reactor in April 1986, the 1986 Annual Delegate Conference of the Institution of Professional Civil Servants set up a Working Party to review the Institution's energy policy, including safety and environmental factors. The review is presented in two volumes as the basis for discussion by the members. Volume I is the main report. Section A, the introduction, includes a summary of the detailed conclusions and recommendations of the Working Party. Section B (chapters 4-12) concerns all aspects of nuclear power including fuel reprocessing and waste management. Section C (chapters 13-16) considers the alternatives to nuclear power and Section D (chapters 17-24) looks at the economic and social aspects of energy policy. The appendices, which contain the detailed technical and source information used by the Working Party in reaching its conclusions, are printed separately in Volume II.

Tissue engineering strategies for alveolar cleft reconstruction: a systematic review of the literature

NARCIS (Netherlands)

Janssen, N.G.; Weijs, W.L.J.; Koole, R.A.; Rosenberg, A.J.; Meijer, G.J.

2014-01-01

OBJECTIVES: To date, a great number of tissue engineering strategies have been suggested for alveolar cleft reconstruction; however, autologous bone grafting seems to remain the golden standard. MATERIALS AND METHODS: A systematic review of the literature was conducted in order to evaluate the

A review on modeling, identification and servo control of robotic ...

African Journals Online (AJOL)

International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 5, No 4 (2013) >. Log in or Register to get access to full text downloads.

Handbook of welding engineering. Vol. 1 and Vol. 2. 2. rev. ed.

International Nuclear Information System (INIS)

Ruge, J.

1980-01-01

This second edition of the handbook still has been guided by the principle of presenting as comprehensive information as possible on the whole subject field of welding engineering as concisely as seems adequate. The task of completely revising the first edition has not been restricted to up-dating the standards, guidelines and instruction sheets. It rather also seemed appropriate to amend the text in many cases in order to incorporate the latest results of research in science and technology. This inevitably enlarged the material to an extent recommending a publication in two volumes. Volume I deals with materials problems, and the sections discussing technical aspects of fracture mechanics and the welding of high-alloy steels have been enlarged. The section on nonmetals has been supplemented by a more detailed treatment of plastics and by chapters on other nonmetals such as glass, ceramics, graphite, and biological substances. Volume II deals with welding techniques, fabrication and quality assurance. Apart from the methods of welding, cutting, soldering, bonding (adhesives), and thermal spray coating, methods of improving the efficiency of fabrication by means of numerically controlled welding and process control are discussed in detail. Taking into account the growing importance of quality assurance, new chapters on modern control methods have been incorporated, methods such as control by neutron radiation, xeroradiography and acoustic and optical holography, as well as a section on distortion and buckling. The chapters on welding and cutting under water in marine technology, on occupational safety and economic aspects have been considerably enlarged. (orig./IHOE) [de

Zede Journal - Vol 29 (2012)

African Journals Online (AJOL)

Journal Home > Archives > Vol 29 (2012) ... Leakage aware hardware and stochastic power scheduling for smart mobile devices ... Energy efficient topology for Wireless Mesh Networks · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Clusters in Nuclei. Vol. 2

International Nuclear Information System (INIS)

Beck, Christian

2012-01-01

Following the pioneering discovery of alpha clustering and of molecular resonances, the field of nuclear clustering is today one of those domains of heavy-ion nuclear physics that faces the greatest challenges, yet also contains the greatest opportunities. After many summer schools and workshops, in particular over the last decade, the community of nuclear molecular physicists has decided to collaborate in producing a comprehensive collection of lectures and tutorial reviews covering the field. This second volume follows the successful Lect. Notes Phys. 818 (Vol.1), and comprises six extensive lectures covering the following topics: - Microscopic cluster models - Neutron halo and break-up reactions - Break-up reaction models for two- and three-cluster projectiles - Clustering effects within the di-nuclear model - Nuclear alpha-particle condensates - Clusters in nuclei: experimental perspectives By promoting new ideas and developments while retaining a pedagogical style of presentation throughout, these lectures will serve as both a reference and an advanced teaching manual for future courses and schools in the fields of nuclear physics and nuclear astrophysics. (orig.)

Clusters in Nuclei. Vol. 2

Energy Technology Data Exchange (ETDEWEB)

Beck, Christian (ed.) [Strasbourg Univ. (France). Inst. Pluridiciplinaire Hubert Curien

2012-07-01

Following the pioneering discovery of alpha clustering and of molecular resonances, the field of nuclear clustering is today one of those domains of heavy-ion nuclear physics that faces the greatest challenges, yet also contains the greatest opportunities. After many summer schools and workshops, in particular over the last decade, the community of nuclear molecular physicists has decided to collaborate in producing a comprehensive collection of lectures and tutorial reviews covering the field. This second volume follows the successful Lect. Notes Phys. 818 (Vol.1), and comprises six extensive lectures covering the following topics: - Microscopic cluster models - Neutron halo and break-up reactions - Break-up reaction models for two- and three-cluster projectiles - Clustering effects within the di-nuclear model - Nuclear alpha-particle condensates - Clusters in nuclei: experimental perspectives By promoting new ideas and developments while retaining a pedagogical style of presentation throughout, these lectures will serve as both a reference and an advanced teaching manual for future courses and schools in the fields of nuclear physics and nuclear astrophysics. (orig.)

Using Peer Reviews to Examine Micropolitics and Disciplinary Development of Engineering Education: A Case Study

Science.gov (United States)

Beddoes, Kacey

2014-01-01

This article presents a case study of the peer review process for a feminist article submitted to an engineering education journal. It demonstrates how an examination of peer review can be a useful approach to further understanding the development of feminist thought in education fields. Rather than opposition to feminist thought per se, my…

Review of spectral imaging technology in biomedical engineering: achievements and challenges.

Science.gov (United States)

Li, Qingli; He, Xiaofu; Wang, Yiting; Liu, Hongying; Xu, Dongrong; Guo, Fangmin

2013-10-01

Spectral imaging is a technology that integrates conventional imaging and spectroscopy to get both spatial and spectral information from an object. Although this technology was originally developed for remote sensing, it has been extended to the biomedical engineering field as a powerful analytical tool for biological and biomedical research. This review introduces the basics of spectral imaging, imaging methods, current equipment, and recent advances in biomedical applications. The performance and analytical capabilities of spectral imaging systems for biological and biomedical imaging are discussed. In particular, the current achievements and limitations of this technology in biomedical engineering are presented. The benefits and development trends of biomedical spectral imaging are highlighted to provide the reader with an insight into the current technological advances and its potential for biomedical research.

Hydrogels for precision meniscus tissue engineering: a comprehensive review.

Science.gov (United States)

Rey-Rico, Ana; Cucchiarini, Magali; Madry, Henning

The meniscus plays a pivotal role to preserve the knee joint homeostasis. Lesions to the meniscus are frequent, have a reduced ability to heal, and may induce tibiofemoral osteoarthritis. Current reconstructive therapeutic options mainly focus on the treatment of lesions in the peripheral vascularized region. In contrast, few approaches are capable of stimulating repair of damaged meniscal tissue in the central, avascular portion. Tissue engineering approaches are of high interest to repair or replace damaged meniscus tissue in this area. Hydrogel-based biomaterials are of special interest for meniscus repair as its inner part contains relatively high proportions of proteoglycans which are responsible for the viscoelastic compressive properties and hydration grade. Hydrogels exhibiting high water content and providing a specific three-dimensional (3D) microenvironment may be engineered to precisely resemble this topographical composition of the meniscal tissue. Different polymers of both natural and synthetic origins have been manipulated to produce hydrogels hosting relevant cell populations for meniscus regeneration and provide platforms for meniscus tissue replacement. So far, these compounds have been employed to design controlled delivery systems of bioactive molecules involved in meniscal reparative processes or to host genetically modified cells as a means to enhance meniscus repair. This review describes the most recent advances on the use of hydrogels as platforms for precision meniscus tissue engineering.

3D printed porous ceramic scaffolds for bone tissue engineering: a review.

Science.gov (United States)

Wen, Yu; Xun, Sun; Haoye, Meng; Baichuan, Sun; Peng, Chen; Xuejian, Liu; Kaihong, Zhang; Xuan, Yang; Jiang, Peng; Shibi, Lu

2017-08-22

This study summarizes the recent research status and development of three-dimensional (3D)-printed porous ceramic scaffolds in bone tissue engineering. Recent literature on 3D-printed porous ceramic scaffolds was reviewed. Compared with traditional processing and manufacturing technologies, 3D-printed porous ceramic scaffolds have obvious advantages, such as enhancement of the controllability of the structure or improvement of the production efficiency. More sophisticated scaffolds were fabricated by 3D printing technology. 3D printed bioceramics have broad application prospects in bone tissue engineering. Through understanding the advantages and limitations of different 3D-printing approaches, new classes of bone graft substitutes can be developed.

2015 Space Human Factors Engineering Standing Review Panel

Science.gov (United States)

Steinberg, Susan

2015-01-01

The 2015 Space Human Factors Engineering (SHFE) Standing Review Panel (from here on referred to as the SRP) met for a site visit in Houston, TX on December 2 - 3, 2015. The SRP reviewed the updated research plans for the Risk of Inadequate Design of Human and Automation/Robotic Integration (HARI Risk), the Risk of Inadequate Human-Computer Interaction (HCI Risk), and the Risk of Inadequate Mission, Process and Task Design (MPTask Risk). The SRP also received a status update on the Risk of Incompatible Vehicle/Habitat Design (Hab Risk) and the Risk of Performance Errors Due to Training Deficiencies (Train Risk). The SRP is pleased with the progress and responsiveness of the SHFE team. The presentations were much improved this year. The SRP is also pleased with the human-centered design approach. Below are some of the more extensive comments from the SRP. We have also made comments in each section concerning gaps/tasks in each. The comments below reflect more significant changes that impact more than just one particular section.

Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines. A critical review

Energy Technology Data Exchange (ETDEWEB)

Sahoo, B.B. [Centre for Energy, Indian Institute of Technology, Guwahati 781039 (India); Sahoo, N.; Saha, U.K. [Department of Mechanical Engineering, Indian Institute of Technology, Guwahati 781039 (India)

2009-08-15

Petroleum resources are finite and, therefore, search for their alternative non-petroleum fuels for internal combustion engines is continuing all over the world. Moreover gases emitted by petroleum fuel driven vehicles have an adverse effect on the environment and human health. There is universal acceptance of the need to reduce such emissions. Towards this, scientists have proposed various solutions for diesel engines, one of which is the use of gaseous fuels as a supplement for liquid diesel fuel. These engines, which use conventional diesel fuel and gaseous fuel, are referred to as 'dual-fuel engines'. Natural gas and bio-derived gas appear more attractive alternative fuels for dual-fuel engines in view of their friendly environmental nature. In the gas-fumigated dual-fuel engine, the primary fuel is mixed outside the cylinder before it is inducted into the cylinder. A pilot quantity of liquid fuel is injected towards the end of the compression stroke to initiate combustion. When considering a gaseous fuel for use in existing diesel engines, a number of issues which include, the effects of engine operating and design parameters, and type of gaseous fuel, on the performance of the dual-fuel engines, are important. This paper reviews the research on above issues carried out by various scientists in different diesel engines. This paper touches upon performance, combustion and emission characteristics of dual-fuel engines which use natural gas, biogas, producer gas, methane, liquefied petroleum gas, propane, etc. as gaseous fuel. It reveals that 'dual-fuel concept' is a promising technique for controlling both NO{sub x} and soot emissions even on existing diesel engine. But, HC, CO emissions and 'bsfc' are higher for part load gas diesel engine operations. Thermal efficiency of dual-fuel engines improve either with increased engine speed, or with advanced injection timings, or with increased amount of pilot fuel. The ignition

Women of Color in Mathematics, Science & Engineering: A Review of the Literature.

Science.gov (United States)

Clewell, Beatriz Chu; Anderson, Bernice

This review of the literature on women of color in mathematics, science, and engineering helps define the need for a national agenda for equity in these fields sponsored by the Educational Equity Policy Studies Program of the Center for Women Policy Studies, and for a comprehensive research program that examines barriers to the participation of…

A review of fibrin and fibrin composites for bone tissue engineering.

Science.gov (United States)

Noori, Alireza; Ashrafi, Seyed Jamal; Vaez-Ghaemi, Roza; Hatamian-Zaremi, Ashraf; Webster, Thomas J

2017-01-01

Tissue engineering has emerged as a new treatment approach for bone repair and regeneration seeking to address limitations associated with current therapies, such as autologous bone grafting. While many bone tissue engineering approaches have traditionally focused on synthetic materials (such as polymers or hydrogels), there has been a lot of excitement surrounding the use of natural materials due to their biologically inspired properties. Fibrin is a natural scaffold formed following tissue injury that initiates hemostasis and provides the initial matrix useful for cell adhesion, migration, proliferation, and differentiation. Fibrin has captured the interest of bone tissue engineers due to its excellent biocompatibility, controllable biodegradability, and ability to deliver cells and biomolecules. Fibrin is particularly appealing because its precursors, fibrinogen, and thrombin, which can be derived from the patient's own blood, enable the fabrication of completely autologous scaffolds. In this article, we highlight the unique properties of fibrin as a scaffolding material to treat bone defects. Moreover, we emphasize its role in bone tissue engineering nanocomposites where approaches further emulate the natural nanostructured features of bone when using fibrin and other nanomaterials. We also review the preparation methods of fibrin glue and then discuss a wide range of fibrin applications in bone tissue engineering. These include the delivery of cells and/or biomolecules to a defect site, distributing cells, and/or growth factors throughout other pre-formed scaffolds and enhancing the physical as well as biological properties of other biomaterials. Thoughts on the future direction of fibrin research for bone tissue engineering are also presented. In the future, the development of fibrin precursors as recombinant proteins will solve problems associated with using multiple or single-donor fibrin glue, and the combination of nanomaterials that allow for the

Review of vascularised bone tissue-engineering strategies with a focus on co-culture systems.

Science.gov (United States)

Liu, Yuchun; Chan, Jerry K Y; Teoh, Swee-Hin

2015-02-01

Poor angiogenesis within tissue-engineered grafts has been identified as a main challenge limiting the clinical introduction of bone tissue-engineering (BTE) approaches for the repair of large bone defects. Thick BTE grafts often exhibit poor cellular viability particularly at the core, leading to graft failure and lack of integration with host tissues. Various BTE approaches have been explored for improving vascularisation in tissue-engineered constructs and are briefly discussed in this review. Recent investigations relating to co-culture systems of endothelial and osteoblast-like cells have shown evidence of BTE efficacy in increasing vascularization in thick constructs. This review provides an overview of key concepts related to bone formation and then focuses on the current state of engineered vascularized co-culture systems using bone repair as a model. It will also address key questions regarding the generation of clinically relevant vascularized bone constructs as well as potential directions and considerations for research with the objective of pursuing engineered co-culture systems in other disciplines of vascularized regenerative medicine. The final objective is to generate serious and functional long-lasting vessels for sustainable angiogenesis that will enable enhanced cellular survival within thick voluminous bone grafts, thereby aiding in bone formation and remodelling in the long term. However, more evidence about the quality of blood vessels formed and its associated functional improvement in bone formation as well as a mechanistic understanding of their interactions are necessary for designing better therapeutic strategies for translation to clinical settings. Copyright © 2012 John Wiley & Sons, Ltd.

Engineering Extreme Hydrophobic and Super Slippery Water Shedding Surfaces

Science.gov (United States)

McHale, Glen

2017-04-01

The intrinsic water repellency of a material is fundamentally determined by its surface chemistry, but alone this does not determine the ability of a surface to shed water. Physical factors such as the surface texture/topography, rigidity/flexibility, granularity/porosity combined with the intrinsic wetting properties of the liquid with the surface and whether it is infused by a lubricating liquid are equally important. In this talk I will outline fundamental, but simple, ideas on the topographic enhancement of surface chemistry to create superhydrophobicity, the adhesion of particles to liquid-air interfaces to create liquid marbles, elastocapillarity to create droplet wrapping, and lubricant impregnated surfaces to create completely mobile droplets [1-3]. I will discuss how these ideas have their origins in natural systems and surfaces, such as Lotus leaves, galling aphids and the Nepenthes pitcher plant. I will show how we have applied these concepts to study the wetting of granular systems, such as sand, to understand extreme soil water repellency. I will argue that relaxing the assumption that a solid substrate is fixed in shape and arrangement, can lead to the formation of liquid marbles, whereby a droplet self-coats in a hydrophobic powder/grains. I will show that the concepts of wetting and porosity blur as liquids penetrate into a porous or granular substrate. I will also discuss how lubricant impregnated super slippery surfaces can be used to study a pure constant contact angle mode of droplet evaporation [4]. Finally, I will show dewetting of a surface is not simply a video reversal of wetting [5], and I will give an example of the use of perfect hydrophobicity using the Leidenfrost effect to create a new type of low friction mechanical and hear engine [6]. References: [1] Shirtcliffe, N. J., et al., An introduction to superhydrophobicity. Advances in Colloid and Interface Science, vol. 161, pp.124-138 (2010). [2] McHale, G. & Newton, M. I. Liquid

Engineering Functional Epithelium for Regenerative Medicine and In Vitro Organ Models: A Review

Science.gov (United States)

Vrana, Nihal E.; Lavalle, Philippe; Dokmeci, Mehmet R.; Dehghani, Fariba; Ghaemmaghami, Amir M.

2013-01-01

Recent advances in the fields of microfabrication, biomaterials, and tissue engineering have provided new opportunities for developing biomimetic and functional tissues with potential applications in disease modeling, drug discovery, and replacing damaged tissues. An intact epithelium plays an indispensable role in the functionality of several organs such as the trachea, esophagus, and cornea. Furthermore, the integrity of the epithelial barrier and its degree of differentiation would define the level of success in tissue engineering of other organs such as the bladder and the skin. In this review, we focus on the challenges and requirements associated with engineering of epithelial layers in different tissues. Functional epithelial layers can be achieved by methods such as cell sheets, cell homing, and in situ epithelialization. However, for organs composed of several tissues, other important factors such as (1) in vivo epithelial cell migration, (2) multicell-type differentiation within the epithelium, and (3) epithelial cell interactions with the underlying mesenchymal cells should also be considered. Recent successful clinical trials in tissue engineering of the trachea have highlighted the importance of a functional epithelium for long-term success and survival of tissue replacements. Hence, using the trachea as a model tissue in clinical use, we describe the optimal structure of an artificial epithelium as well as challenges of obtaining a fully functional epithelium in macroscale. One of the possible remedies to address such challenges is the use of bottom-up fabrication methods to obtain a functional epithelium. Modular approaches for the generation of functional epithelial layers are reviewed and other emerging applications of microscale epithelial tissue models for studying epithelial/mesenchymal interactions in healthy and diseased (e.g., cancer) tissues are described. These models can elucidate the epithelial/mesenchymal tissue interactions at the

Independent engineering review of the Hanford Waste Vitrification System

International Nuclear Information System (INIS)

1991-10-01

The Hanford Waste Vitrification Plant (HWVP) was initiated in June 1987. The HWVP is an essential element of the plan to end present interim storage practices for defense wastes and to provide for permanent disposal. The project start was justified, in part, on efficient technology and design information transfer from the prototype Defense Waste Processing Facility (DWPF). Development of other serial Hanford Waste Vitrification System (HWVS) elements, such as the waste retrieval system for the double-shell tanks (DSTs), and the pretreatment system to reduce the waste volume converted into glass, also was required to accomplish permanent waste disposal. In July 1991, at the time of this review, the HWVP was in the Title 2 design phase. The objective of this technical assessment is to determine whether the status of the technology development and engineering practice is sufficient to provide reasonable assurance that the HWVP and the balance of the HWVS system will operate in an efficient and cost-effective manner. The criteria used to facilitate a judgment of potential successful operation are: vitrification of high-level radioactive waste from specified DSTs on a reasonably continuous basis; and glass produced with physical and chemical properties formally acknowledge as being acceptable for disposal in a repository for high-level radioactive waste. The criteria were proposed specifically for the Independent Engineering Review to focus that assessment effort. They are not represented as the criteria by which the Department will judge the prudence of the Project. 78 refs., 10 figs., 12 tabs

Independent engineering review of the Hanford Waste Vitrification System

Energy Technology Data Exchange (ETDEWEB)

1991-10-01

The Hanford Waste Vitrification Plant (HWVP) was initiated in June 1987. The HWVP is an essential element of the plan to end present interim storage practices for defense wastes and to provide for permanent disposal. The project start was justified, in part, on efficient technology and design information transfer from the prototype Defense Waste Processing Facility (DWPF). Development of other serial Hanford Waste Vitrification System (HWVS) elements, such as the waste retrieval system for the double-shell tanks (DSTs), and the pretreatment system to reduce the waste volume converted into glass, also was required to accomplish permanent waste disposal. In July 1991, at the time of this review, the HWVP was in the Title 2 design phase. The objective of this technical assessment is to determine whether the status of the technology development and engineering practice is sufficient to provide reasonable assurance that the HWVP and the balance of the HWVS system will operate in an efficient and cost-effective manner. The criteria used to facilitate a judgment of potential successful operation are: vitrification of high-level radioactive waste from specified DSTs on a reasonably continuous basis; and glass produced with physical and chemical properties formally acknowledge as being acceptable for disposal in a repository for high-level radioactive waste. The criteria were proposed specifically for the Independent Engineering Review to focus that assessment effort. They are not represented as the criteria by which the Department will judge the prudence of the Project. 78 refs., 10 figs., 12 tabs.

Organic Rankine cycle – review and research directions in engine applications

Directory of Open Access Journals (Sweden)

Panesar Angad

2017-01-01

Full Text Available Waste heat to power conversion using Organic Rankine Cycles (ORC is expected to play an important role in CO2 reductions from diesel engines. Firstly, a review of automotive ORCs is presented focusing on the pure working fluids, thermal architectures and expanders. The discussion includes, but is not limited to: R245fa, ethanol and water as fluids; series, parallel and cascade as architectures; dry saturated, superheated and supercritical as expansion conditions; and scroll, radial turbine and piston as expansion machines. Secondly, research direction in versatile expander and holistic architecture (NOx + CO2 are proposed. Benefits of using the proposed unconventional approaches are quantified using Ricardo Wave and Aspen HYSYS for diesel engine and ORC modelling. Results indicate that, the implementation of versatile piston expander tolerant to two-phase and using cyclopentane can potentially increase the highway drive cycle power by 8%. Furthermore, holistic architecture offering complete utilisation of charge air and exhaust recirculation heat increased the performance noticeably to 5% of engine power at the design point condition.

Machining the Integral Impeller and Blisk of Aero-Engines: A Review of Surface Finishing and Strengthening Technologies

Science.gov (United States)

Fu, Youzhi; Gao, Hang; Wang, Xuanping; Guo, Dongming

2017-05-01

The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has significant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and integrated finishing and strengthening technologies and discusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.

samaru-main-vol 11 2011

African Journals Online (AJOL)

Library _info_Sc_ 1

2004-07-11

Jul 11, 2004 ... Samaru Journal of Information Studies Vol. 11 (1 & 2)2011 ... It is therefore paramount that the library ... source of primary and up to date information, both students and ... entertainment, arts, fashion, law, economy, medicine,.

Review of durability of cementitious engineered barriers in repository environments

International Nuclear Information System (INIS)

Parrott, L.J.; Lawrence, C.D.

1992-01-01

This report is concerned with the durability of cementitious engineered barriers in a repository for low and intermediate level nuclear waste. Following the introduction the second section of the review identifies the environmental conditions associated with a deep, hard rock repository for ILW and LLW that are relevant to the durability of cementitious barriers. Section three examines the microstructure and macrostructure of cementitious materials and considers the physical and chemical processes of radionuclide immobilization. Potential repository applications and compositions of cementitious materials are reviewed in Section four. The main analysis of durability is dealt with in Section five. The different types of cementitious barrier are considered separately and their most probable modes of degradation are analysed. Concluding remarks that highlight critical technical matters are given in Section six. (author)

Michele Renee Salzman, Marvina A. Sweeney & William Adler (eds., The Cambridge History of Religions in the Ancient World (2 vols. (New York: Cambridge University Press, 2013

Directory of Open Access Journals (Sweden)

Giorgio Baruchello

2014-03-01

Full Text Available Review of: Michele Renee Salzman, Marvina A. Sweeney & William Adler (eds., The Cambridge History of Religions in the Ancient World (2 vols. (New York: Cambridge University Press, 2013

Vol 12, No 1 (2014)

African Journals Online (AJOL)

Egyptian Journal of Pediatric Allergy and Immunology (The) - Vol 12, No 1 (2014) ... The effect of serum angiotensin II and angiotensin II type 1 receptor gene ... with diabetic ketoacidosis · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Recent advancements in electrospinning design for tissue engineering applications: A review.

Science.gov (United States)

Kishan, Alysha P; Cosgriff-Hernandez, Elizabeth M

2017-10-01

Electrospinning, a technique used to fabricate fibrous scaffolds, has gained popularity in recent years as a method to produce tissue engineered grafts with architectural similarities to the extracellular matrix. Beyond its versatility in material selection, electrospinning also provides many tools to tune the fiber morphology and scaffold geometry. Recent efforts have focused on extending the capabilities of electrospinning to produce scaffolds that better recapitulate tissue properties and enhance regeneration. This review highlights these advancements by providing an overview of the processing variables and setups used to modulate scaffold architecture, discussing strategies to improve cellular infiltration and guide cell behavior, and providing a summary of electrospinning applications in tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2892-2905, 2017. © 2017 Wiley Periodicals, Inc.

Feasibility of using less viscous and lower cetane (LVLC) fuels in a diesel engine: A review

KAUST Repository

Vallinayagam, R.

2015-11-01

This review work focuses on biofuels with lower viscosity and cetane number and their mode of operation in a diesel engine. Though there were a number of review works describing the production, characterization and utilization of biodiesel, synthesized from vegetable oils, a comprehensive summary on other category of biofuels endowed with lower viscosity and cetane number has not come to light so far. In this backdrop, this review work would bring forth the existence of biofuels having lower viscosity and cetane number, classify them under one category and elucidate their operational feasibility in a diesel engine. Considerably, alcohol based fuels such as methanol, ethanol and butanol, and plant based light biofuels such as eucalyptus oil and pine oil have been chosen and classified as LVLC (less viscous and lower cetane) fuels in the current work. Besides describing the operation feasibility of these fuels, an extensive exploration of their physical, thermal and critical properties as well as their compositional attributes has been made. Despite their distinct properties, these fuels have found use in diesel engine by various strategies and apparently, they could be used in blends with diesel/biodiesel, dual fuel mode and as sole fuel. In this regard, herein, a detailed summary on operation of these fuels in the reported three different modes is clearly explained and their engine characteristics such as performance, combustion and emission are briefed. © 2015 Elsevier Ltd.

Biodiesel from plant seed oils as an alternate fuel for compression ignition engines-a review.

Science.gov (United States)

Vijayakumar, C; Ramesh, M; Murugesan, A; Panneerselvam, N; Subramaniam, D; Bharathiraja, M

2016-12-01

The modern scenario reveals that the world is facing energy crisis due to the dwindling sources of fossil fuels. Environment protection agencies are more concerned about the atmospheric pollution due to the burning of fossil fuels. Alternative fuel research is getting augmented because of the above reasons. Plant seed oils (vegetable oils) are cleaner, sustainable, and renewable. So, it can be the most suitable alternative fuel for compression ignition (CI) engines. This paper reviews the availability of different types of plant seed oils, several methods for production of biodiesel from vegetable oils, and its properties. The different types of oils considered in this review are cashew nut shell liquid (CNSL) oil, ginger oil, eucalyptus oil, rice bran oil, Calophyllum inophyllum, hazelnut oil, sesame oil, clove stem oil, sardine oil, honge oil, polanga oil, mahua oil, rubber seed oil, cotton seed oil, neem oil, jatropha oil, egunsi melon oil, shea butter, linseed oil, Mohr oil, sea lemon oil, pumpkin oil, tobacco seed oil, jojoba oil, and mustard oil. Several methods for production of biodiesel are transesterification, pre-treatment, pyrolysis, and water emulsion are discussed. The various fuel properties considered for review such as specific gravity, viscosity, calorific value, flash point, and fire point are presented. The review also portrays advantages, limitations, performance, and emission characteristics of engine using plant seed oil biodiesel are discussed. Finally, the modeling and optimization of engine for various biofuels with different input and output parameters using artificial neural network, response surface methodology, and Taguchi are included.

Internal combustion engines history - a review

International Nuclear Information System (INIS)

Gaviria Rios, Jorge Enrique; Mora Guzman, Jorge Hernan; Agudelo, John Ramiro

2002-01-01

In this article, a chronological analysis of the technologies and events that any way influenced in the evolution of the internal combustion engine is done everything it through the observation of the works carried out for scientific empiric and engineers whose technical and conceptual value meant the motivation of other people for the search of a better development in this engineering field

Multiple Learning Strategies Project. Building Maintenance & Engineering. Regular Vocational. [Vol. 2.

Science.gov (United States)

Smith, Dwight; And Others

This instructional package is one of two designed for regular vocational students in the vocational area of building maintenance and engineering. The fifty-three learning modules are organized into ten units: office cleaning; grounds; sanitation; boiler maintenance and operation; power and hand tools; cabinet construction; repair of damaged…

Elimination of Coast Guard plan review for non-critical engineering systems and cargo barges

Science.gov (United States)

1994-06-21

The purpose of this Circular is to publish policy that provides for the elimination of Coast Guard review and approval of certain engineering system drawings for all vessels as well as structural drawings for Coast Guard inspected non-self propelled ...

Multiple Learning Strategies Project. Building Maintenance & Engineering. Low Reader. [Vol. 2.

Science.gov (United States)

Steinberg, A.; And Others

This instructional package is one of two designed for low reader students (those reading at grade level 3-6) in the vocational area of building maintenance and engineering. The forty-four learning modules are organized into eleven units: chalkboards; carpet care; office cleaning; grounds; sanitation; boiler maintenance and operation; power and…

Review of Microfluidic Photobioreactor Technology for Metabolic Engineering and Synthetic Biology of Cyanobacteria and Microalgae

Directory of Open Access Journals (Sweden)

Ya-Tang Yang

2016-10-01

Full Text Available One goal of metabolic engineering and synthetic biology for cyanobacteria and microalgae is to engineer strains that can optimally produce biofuels and commodity chemicals. However, the current workflow is slow and labor intensive with respect to assembly of genetic parts and characterization of production yields because of the slow growth rates of these organisms. Here, we review recent progress in the microfluidic photobioreactors and identify opportunities and unmet needs in metabolic engineering and synthetic biology. Because of the unprecedented experimental resolution down to the single cell level, long-term real-time monitoring capability, and high throughput with low cost, microfluidic photobioreactor technology will be an indispensible tool to speed up the development process, advance fundamental knowledge, and realize the full potential of metabolic engineering and synthetic biology for cyanobacteria and microalgae.

Multiple Learning Strategies Project. Building Maintenance & Engineering. Low Reader. [Vol. 1.

Science.gov (United States)

Smith, Dwight; And Others

This instructional package is one of two designed for low reader students (those reading at a 3-6 grade level) in the vocational area of building maintenance and engineering. The forty-six learning modules are organized into three units: floor care; general maintenance tasks; and restrooms. Each module includes these elements: a performance…

Anestesia volátil e monitorização anestésica.

OpenAIRE

Alexandre, Nuno; Costa, Margarida; Mascarenhas, Ramiro

2009-01-01

Os autores apresentam um texto de apoio à disciplina de anestesiologia do curso de Medicina Veterinária .Neste texto são abordadas diversas temáticas da anestesia volátil tais como: equipamentos utilizados em anestesia volátil, farmacologia dos anestésicos voláteis. A monitorização dos pacientes é abordada na vertente mecânica ou intrumental e na componente básica.

A comparative review of accident studies from recent environmental impact statements

International Nuclear Information System (INIS)

Mueller, C.; Folga, S.; Nabelssi, B.

1996-01-01

The U.S. Department of Energy (DOE) has recently prepared or is in the process of preparing a number of programmatic and site-specific environmental impact statements (EISs). This study was conducted for the purpose of reviewing the self-consistency of programmatic alternatives, associated relative impacts, and supporting data, methods, and assumptions in EISs prepared for related activities. The following EISs, which deal with waste management issues, are reviewed in this paper (the parenthetical acronyms are referred to in Table 1): (1) Final Environmental Impact Statement, Savannah River Site Waste Management, DOE/EIS-0217, Vol. II, July 1995. (SRS WM-EIS), (2) Draft Waste Management Programmatic Environmental Impact Statement for Managing Treatment, Storage, and Disposal of Radioactive and Hazardous Waste, DOE/EIS-0200-D, Vol. IV, Aug. 1995. (WM PEIS), (3) Final Environmental Impact Statement, Interim Management of Nuclear Materials at the Savannah River Site. DOE/EIS-0220, Oct. 1995. (IMNM EIS), (4) Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Environmental Impact Statement, DOE/EIS-0203-F, April 1995. (INEL Site-Wide-EIS), (5) Draft Environmental Impact Statement, Disposition of Surplus Highly Enriched Uranium, DOE/EIS-0240-D, Oct. 1995. (HEU Disposition EIS), (6) Final Environmental Impact Statement, Safe Interim Storage of Hanford Tank Wastes, Hanford Site, Richland, Washington, DOE/EIS-0212, Oct. 1995. (SIS EIS). This study compares the facility accident analysis approaches used in these EISs vis-a-vis the National Environmental Policy Act (NEPA) guidance developed by DOE (Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements, Office of NEPA Oversight). The purpose of the comparative review of these approaches with NEPA guidance is to identify potential preferred paths for future EISs

Ethiopian Journal of Health Sciences - Vol 28, No 2 (2018)

African Journals Online (AJOL)

Ethiopian Journal of Health Sciences - Vol 28, No 2 (2018). Journal Home > Archives > Vol 28, No 2 (2018). Log in or Register to get access to full text downloads. ... Prevalence of opportunistic intestinal parasites and associated factors among HIV patients while receiving ART at Arba Minch Hospital in southern Ethiopia: a ...

Experimental study on emissions and performance of an internal combustion engine fueled with gasoline and gasoline/n-butanol blends

International Nuclear Information System (INIS)

Elfasakhany, Ashraf

2014-01-01

Highlights: • Using of 3 and 7 vol.% n-butanol blends in SI engine is studied for the first time. • Engine performance and emissions depend on both engine speed and blend rates. • CO and UHC for blended fuels are maximum at 3000–3100 r/min. • The higher the rate of n-butanol, the lower the emissions and performance. • This study strongly supports using low blend rates of n-butanol (<10 vol.%) in ICE. - Abstract: In this paper, exhaust emissions and engine performance have been experimentally studied for neat gasoline and gasoline/n-butanol blends in a wide range of working speeds (2600–3400 r/min) without any tuning or modification on the gasoline engine systems. The experiment has the ability of evaluating performance and emission characteristics, such as break power, torque, in-cylinder pressure, volumetric efficiency, exhaust gas temperature and concentrations of CO 2 , CO and UHC. Results of the engine test indicated that using n-butanol–gasoline blended fuels slightly decrease the output torque, power, volumetric efficiency, exhaust gas temperature and in-cylinder pressure of the engine as a result of the leaning effect caused by the n-butanol addition; CO, CO 2 and UHC emissions decrease dramatically for blended fuels compared to neat gasoline because of the improved combustion since n-butanol has extra oxygen, which allows partial reduction of the CO and UHC through formation of CO 2 . It was also noted that the exhaust emissions depend on the engine speed rather than the n-butanol contents

Graphical User Interfaces Reverse Engineering for Requirements Elicitation - Literature Review

Directory of Open Access Journals (Sweden)

Carol Jaimes

2016-06-01

Full Text Available This paper exhibits a synthesis of the use of legacy systems GUI reverse engineering as a tool to software requirements elicitation. It presents a literature review describing the approaches related to the topic. This work primary goal is to determine the major investigations in this area, and if there are techniques focused exclusively on the observation of the legacy applications GUI to obtain software requirements in a standard format, without the use of source code, data structures, documentation or sophisticated algorithms for the application analysis.

Technical dictionary power plant engineering. Vol. 1. 4. rev. and enlarged ed.

International Nuclear Information System (INIS)

1987-01-01

This dictionary is a compilation of German and English technical terms of power plant engineering as far as power plants, turbine-generators and assembly engineering are concerned. It is the result of a joint effort by the Kraftwerk Union AG (KWU) and Utility Power Corp. (UPC). The entire content has been revised and approx. 6000 new terms have been added. The dictionary is meant to form a basis for uniform terminology on technical documents as well as correspondence between KWU, UPC and licensees. This computer aided dictionary is printed in capital/low case letters. Only nouns, terms with an article and proper names are capitalized in German. Some terms are written differently in American and British English and are marked with (US) or (GB). (orig./HP) [de

Report of the Review Committee of the R and D subjects on Computational Science and Engineering

International Nuclear Information System (INIS)

1999-08-01

The Ad Hoc Review Committee composed of seven experts was set up under the Research Evaluation Committee of JAERI in order to review the R and D subjects to be implemented for five years starting in a 2000 fiscal year at the Center for promotion of Computational Science and Engineering. The review meeting took place on April 26, 1999. According to the review methods consisting of review items, points of review and review criteria given by the Research Evaluation Committee, the review was conducted based on the materials submitted in advance and presentations of CCSE. The Research Evaluation Committee received the review report and its explanations from the Review Committee on July 5. The Research Evaluation Committee has acknowledged appropriateness of the review results. This report describes the review results. (author)

Precipitation in Powder Metallurgy, Nickel Base Superalloys: Review of Modeling Approach and Formulation of Engineering (Postprint)

Science.gov (United States)

2016-12-01

AFRL-RX-WP-JA-2016-0333 PRECIPITATION IN POWDER- METALLURGY , NICKEL-BASE SUPERALLOYS: REVIEW OF MODELING APPROACH AND FORMULATION OF...PRECIPITATION IN POWDER- METALLURGY , NICKEL- BASE SUPERALLOYS: REVIEW OF MODELING APPROACH AND FORMULATION OF ENGINEERING (POSTPRINT) 5a...and kinetic parameters required for the modeling of γ′ precipitation in powder- metallurgy (PM), nickel-base superalloys are summarized. These

Dynamics of structures '89. Vol. 1 and 2

International Nuclear Information System (INIS)

1989-01-01

The proceedings, comprising 3 volumes published by the Plzen Centre of the Czechoslovak Society for Science and Technology (Vol. 1 and 2) and by Skoda Works in Plzen (Vol. 3), contain 107 papers, out of which 8 fall within the INIS Subject Scope; these deal with problems related to the earthquake resistance of nuclear power plants. Attention is paid to the evaluation of seismic characteristics of nuclear power plant equipment, to the equipment testing and to calculations of its dynamic characteristics under simulated seismic stress. (Z.M.)

78 FR 31315 - Kraft Pulp Mills NSPS Review

Science.gov (United States)

2013-05-23

... Kraft Pulp Mills NSPS Review; Proposed Rule #0;#0;Federal Register / Vol. 78 , No. 100 / Thursday, May...-OAR-2012-0640; FRL-9815-9] RIN 2060-AR64 Kraft Pulp Mills NSPS Review AGENCY: Environmental Protection... performance standards for kraft pulp mills. These revised standards include particulate matter emission limits...

Experimental investigation on SI engine using gasoline and a hybrid iso-butanol/gasoline fuel

International Nuclear Information System (INIS)

Elfasakhany, Ashraf

2015-01-01

Highlights: • iso-Butanol–gasoline blends (iB) using up to 10 vol.% butanol were examined in SIE. • iB extensively decrease the greenhouse effect of SI engine. • iB without engine tuning led to a drop in engine performance at all speeds. • iB provide higher performance and lower CO and CO 2 emissions than n-butanol blends. • iB grant lower CO and UHC than gasoline at <2900 r/min, but overturn at >2900 r/min. - Abstract: Experimental investigation on pollutant emissions and performance of SI engine fueled with gasoline and iso-butanol–gasoline blends is carried out. Engine was operated at speed range of 2600–3400 r/min for each blend (3, 7 and 10 vol.% iso-butanol) and neat gasoline. Results declare that the CO and UHC emissions of neat gasoline are higher than those of the blended fuels for speeds less than or equal to 2900 r/min; however, for speeds higher than 2900 r/min, we have an opposite impact where the blended fuels produce higher level of CO and UHC emissions than the gasoline fuel. The CO 2 emission at using iso-butanol–gasoline blends is always lower than the neat gasoline at all speeds by up to 43%. The engine performance results demonstrate that using iso-butanol–gasoline blends in SI engine without any engine tuning lead to a drop in engine performance within all speed range. Without modifying the engine system, overall fuel combustion of iso-butanol–gasoline blends was quasi-complete. However, when engine system is optimized for blended fuels, iso-butanol has significant oxygen content and that can lead to a leaner combustion, which improves the completeness of combustion and therefore high performance and less emissions would be obtained. Finally, the performance and emissions of iso-butanol–gasoline blends are compared with those of n-butanol–gasoline blends at similar blended rates and engine working conditions. Such comparison is directed to evaluate the combustion dissimilarity of the two butanol isomers and also to

A review of fibrin and fibrin composites for bone tissue engineering

Directory of Open Access Journals (Sweden)

Noori A

2017-07-01

Full Text Available Alireza Noori,1 Seyed Jamal Ashrafi,2 Roza Vaez-Ghaemi,3 Ashraf Hatamian-Zaremi,4 Thomas J Webster5 1Department of Tissue Engineering and Applied Cell Sciences, Faculty of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, 2School of Medicine, Shahroud University of Medical Sciences, Shahroud, Iran; 3Department of Chemical and Biological Engineering, Faculty of Biomedical Engineering, The University of British Columbia, Vancouver, BC, Canada; 4Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran; 5Department of Chemical Engineering, Northeastern University, Boston, MA, USA Abstract: Tissue engineering has emerged as a new treatment approach for bone repair and regeneration seeking to address limitations associated with current therapies, such as autologous bone grafting. While many bone tissue engineering approaches have traditionally focused on synthetic materials (such as polymers or hydrogels, there has been a lot of excitement surrounding the use of natural materials due to their biologically inspired properties. Fibrin is a natural scaffold formed following tissue injury that initiates hemostasis and provides the initial matrix useful for cell adhesion, migration, proliferation, and differentiation. Fibrin has captured the interest of bone tissue engineers due to its excellent biocompatibility, controllable biodegradability, and ability to deliver cells and biomolecules. Fibrin is particularly appealing because its precursors, fibrinogen, and thrombin, which can be derived from the patient’s own blood, enable the fabrication of completely autologous scaffolds. In this article, we highlight the unique properties of fibrin as a scaffolding material to treat bone defects. Moreover, we emphasize its role in bone tissue engineering nanocomposites where approaches further emulate the natural nanostructured features of bone when using fibrin and other nanomaterials. We also review the

Large hadron collider workshop. Proceedings. Vol. 3

International Nuclear Information System (INIS)

Jarlskog, G.; Rein, D.

1990-01-01

The aim of the LHC workshop at Aachen was to discuss the 'discovery potential' of a high-luminosity hadron collider (the Large Hadron Collider) and to define the requirements of the detectors. Of central interest was whether a Higgs particle with mass below 1 TeV could be seen using detectors potentially available within a few years from now. Other topics included supersymmetry, heavy quarks, excited gauge bosons, and exotica in proton-proton collisions, as well as physics to be observed in electron-proton and heavy-ion collisions. A large part of the workshop was devoted to the discussion of instrumental and detector concepts, including simulation, signal processing, data acquisition, tracking, calorimetry, lepton identification and radiation hardness. The workshop began with parallel sessions of working groups on physics and instrumentaiton and continued, in the second half, with plenary talks giving overviews of the LHC project and the SSC, RHIC, and HERA programmes, summaries of the working groups, presentations from industry, and conclusions. Vol. 1 of these proceedings contains the papers presented at the plenary sessions, Vol. 2 the individual contributions to the physics sessions, and Vol. 3 those to the instrumentation sessions. (orig.)

Large hadron collider workshop. Proceedings. Vol. 2

International Nuclear Information System (INIS)

Jarlskog, G.; Rein, D.

1990-01-01

The aim of the LHC workshop at Aachen was to discuss the 'discovery potential' of a high-luminosity hadron collider (the Large Hadron Collider) and to define the requirements of the detectors. Of central interest was whether a Higgs particle with mass below 1 TeV could be seen using detectors potentially available within a few years from now. Other topics included supersymmetry, heavy quarks, excited gauge bosons, and exotica in proton-proton collisions, as well as physics to be observed in electron-proton and heavy-ion collisions. A large part of the workshop was devoted to the discussion of instrumental and detector concepts, including simulation, signal processing, data acquisition, tracking, calorimetry, lepton identification and radiation hardness. The workshop began with parallel sessions of working groups on physics and instrumentation and continued, in the second half, with plenary talks giving overviews of the LHC project and the SSC, RHIC, and HERA programmes, summaries of the working groups, presentations from industry, and conclusions. Vol.1 of these proceedings contains the papers presented at the plenary sessions, Vol.2 the individual contributions to the physics sessions, and Vol.3 those to the instrumentation sessions. (orig.)

Large hadron collider workshop. Proceedings. Vol. 1

International Nuclear Information System (INIS)

Jarlskog, G.; Rein, D.

1990-01-01

The aim of the LCH workshop at Aachen was to discuss the 'discovery potential' of a high-luminosity hadron collider (the Large Hadron Collider) and to define the requirements of the detectors. Of central interest was whether a Higgs particle with mass below 1 TeV could be seen using detectors potentially available within a few years from now. Other topics included supersymmetry, heavy quarks, excited gauge bosons, and exotica in proton-proton collisions, as well as physics to be observed in electron-proton and heavy-ion collisions. A large part of the workshop was devoted to the discussion of instrumental and detector concepts, including simulation, signal processing, data acquisition, tracking, calorimetry, lepton identification and radiation hardness. The workshop began with parallel sessions of working groups on physics and instrumentation and continued, in the second half, with plenary talks giving overviews of the LHC project and the SSC, RHIC, and HERA programmes, summaries of the working groups, presentations from industry, and conclusions. Vol. 1 of these proceedings contains the papers presented at the plenary sessions, Vol. 2 the individual contributions to the physics sessions, and Vol. 3 those to the instrumentation sessions. (orig.)

The Study of the Performance of Engine Operating on Petroleum and Ethanol Blends

Directory of Open Access Journals (Sweden)

Marius Mažeika

2011-04-01

Full Text Available Test results indicate that a fully loaded engine, fed with 10 vol % ethanol and petrol blends, has power output reduced by 1.67–3.2% at 1400 and 1800 rev/min, while the specific fuel consumption can be slightly increased (up to 4% at 1400 rev/min, and slightly decreased at 1800 rev/min. Carbon monoxide CO emissions of the fully loaded engine running on biofuel blend E10 are reduced by about 0–50% compared to those observed when petrol is used. To introduce ethanol and petrol blends with higher E20 concentration as an engine fuel, special adjustment of the fuel system is needed.Article in Lithuanian

Use of crude filtered vegetable oil as a fuel in diesel engines state of the art: Literature review

Energy Technology Data Exchange (ETDEWEB)

Sidibe, S.S.; Azoumah, Y. [Institut Internationale d' ingenierie de l' Eau et de l' Environnement (2iE), rue de science 01 Ouagadougou 01 BP 594 (Burkina Faso); Blin, J. [Institut Internationale d' ingenierie de l' Eau et de l' Environnement (2iE), rue de science 01 Ouagadougou 01 BP 594 (Burkina Faso); Centre International de Recherche Agronomique pour le Developpement (CIRAD), UPR Biomasse energie, TA B-42/16, 73 rue JF Breton, 34398 Montpellier Cedex 5 (France); Vaitilingom, G. [Centre International de Recherche Agronomique pour le Developpement (CIRAD), UPR Biomasse energie, TA B-42/16, 73 rue JF Breton, 34398 Montpellier Cedex 5 (France)

2010-12-15

Many studies have been published on vegetable oil use in diesel engines. The different authors unanimously acknowledge the potential and merits of this renewable fuel. Typically, Straight Vegetable Oils (SVOs) produced locally on a small scale, have proven to be easy to produce with very little environmental impact. However, as their physico-chemical characteristics differ from those of diesel oil, their use in diesel engines can lead to a certain number of technical problems over time. In bibliography, there is substantial disagreement between authors regarding the advanced phenomena linked to this problems and the recommended solutions. Some of these publications treat options individually without any real comparison between them. Another observation is that the literature rarely tackles problems linked to vegetable oil quality. This paper sets out to review the state of the art for SVO use as fuel in diesel engines, based on a bibliographic study (literature review). The first section of the document examines the influence of the type and quality of vegetable oils for fuel use in diesel engines. The second section discusses the advantages and disadvantages of two options recommended for SVO use in diesel engines: dual fuelling and blending with diesel fuel. (author)

Errata Resonance, Vol.20, No.12, 2015. Rajaram Nityananda, Sun ...

Indian Academy of Sciences (India)

IAS Admin

Resonance, Vol.20, No.12, 2015. Rajaram Nityananda, Sun, Sky and Clouds: Where Light and Matter Meet. Page 1121: The correct Figure 5 is reproduced below: Resonance, Vol.20, No.11, 2015. Anil Kumar, Felix Bloch (1905–1983). Page 956: Para 1, Line 5, 'also from Zürich' should be read as 'from nearby Bern'.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

Energy Technology Data Exchange (ETDEWEB)

O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

International Nuclear Information System (INIS)

O'Hara, J.M.; Brown, W.S.; Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J.

1994-07-01

Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

Information manager-2011-Vol 11

African Journals Online (AJOL)

Library _info_Sc_ 1

The Information Manager Vol. ... extent while carrying out their duties on a daily basis. ... It concluded by admonishing librarians to brace up and keep pace ... Proper training should be given to .... used to information and communication technologies .... proficiency Skills .... analysis of the workplace and implementation of.

A Review of Hyaluronic Acid and Hyaluronic Acid-based Hydrogels for Vocal Fold Tissue Engineering.

Science.gov (United States)

Walimbe, Tanaya; Panitch, Alyssa; Sivasankar, Preeti M

2017-07-01

Vocal fold scarring is a common cause of dysphonia. Current treatments involving vocal fold augmentation do not yield satisfactory outcomes in the long term. Tissue engineering and regenerative medicine offer an attractive treatment option for vocal fold scarring, with the aim to restore the native extracellular matrix microenvironment and biomechanical properties of the vocal folds by inhibiting progression of scarring and thus leading to restoration of normal vocal function. Hyaluronic acid is a bioactive glycosaminoglycan responsible for maintaining optimum viscoelastic properties of the vocal folds and hence is widely targeted in tissue engineering applications. This review covers advances in hyaluronic acid-based vocal fold tissue engineering and regeneration strategies. Copyright © 2017. Published by Elsevier Inc.

CLIC Detector Concepts as described in the CDR: Differences between the GEANT4 and Engineering Models

CERN Document Server

Elsener, K; Schlatter, D; Siegrist, N

2011-01-01

The CLIC_ILD and CLIC_SiD detector concepts as used for the CDR Vol. 2 in 2011 exist both in GEANT4 simulation models and in engineering layout drawings. At this early stage of a conceptual design, there are inevitably differences between these models, which are described in this note.

76 FR 29963 - Rate Increase Disclosure and Review

Science.gov (United States)

2011-05-23

... for the product associated with the rate increase; and (8) employee and executive compensation data... 154 Rate Increase Disclosure and Review; Final Rule #0;#0;Federal Register / Vol. 76 , No. 99 / Monday... CFR Part 154 [CMS-9999-FC] RIN 0938-AQ68 Rate Increase Disclosure and Review AGENCY: Center for...

Investigation of engine performance and emissions of a diesel engine with a blend of marine gas oil and synthetic diesel fuel.

Science.gov (United States)

Nabi, Md Nurun; Hustad, Johan Einar

2012-01-01

This paper investigates diesel engine performance and exhaust emissions with marine gas oil (MGO) and a blend of MGO and synthetic diesel fuel. Ten per cent by volume of Fischer-Tropsch (FT), a synthetic diesel fuel, was added to MGO to investigate its influence on the diesel engine performance and emissions. The blended fuel was termed as FT10 fuel, while the neat (100 vol%) MGO was termed as MGO fuel. The experiments were conducted with a fourstroke, six-cylinder, turbocharged, direct injection, Scania DC 1102 diesel engine. It is interesting to note that all emissions including smoke (filter smoke number), total particulate matter (TPM), carbon monoxide (CO), total unburned hydrocarbon (THC), oxides of nitrogen (NOx) and engine noise were reduced with FT10 fuel compared with the MGO fuel. Diesel fine particle number and mass emissions were measured with an electrical low pressure impactor. Like other exhaust emissions, significant reductions in fine particles and mass emissions were observed with the FT10 fuel. The reduction was due to absence of sulphur and aromatic compounds in the FT fuel. In-cylinder gas pressure and engine thermal efficiency were identical for both FT10 and MGO fuels.

Tissue engineering for human urethral reconstruction: systematic review of recent literature.

Science.gov (United States)

de Kemp, Vincent; de Graaf, Petra; Fledderus, Joost O; Ruud Bosch, J L H; de Kort, Laetitia M O

2015-01-01

Techniques to treat urethral stricture and hypospadias are restricted, as substitution of the unhealthy urethra with tissue from other origins (skin, bladder or buccal mucosa) has some limitations. Therefore, alternative sources of tissue for use in urethral reconstructions are considered, such as ex vivo engineered constructs. To review recent literature on tissue engineering for human urethral reconstruction. A search was made in the PubMed and Embase databases restricted to the last 25 years and the English language. A total of 45 articles were selected describing the use of tissue engineering in urethral reconstruction. The results are discussed in four groups: autologous cell cultures, matrices/scaffolds, cell-seeded scaffolds, and clinical results of urethral reconstructions using these materials. Different progenitor cells were used, isolated from either urine or adipose tissue, but slightly better results were obtained with in vitro expansion of urothelial cells from bladder washings, tissue biopsies from the bladder (urothelium) or the oral cavity (buccal mucosa). Compared with a synthetic scaffold, a biological scaffold has the advantage of bioactive extracellular matrix proteins on its surface. When applied clinically, a non-seeded matrix only seems suited for use as an onlay graft. When a tubularized substitution is the aim, a cell-seeded construct seems more beneficial. Considerable experience is available with tissue engineering of urethral tissue in vitro, produced with cells of different origin. Clinical and in vivo experiments show promising results.

African Review of Economics and Finance

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 1 (2016) >. Log in or Register to get access to full text downloads.

EDITORIAL: | Oloyede | African Sociological Review / Revue ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 18, No 2 (2014) >. Log in or Register to get access to full text downloads.

Future Prospects for Scaffolding Methods and Biomaterials in Skin Tissue Engineering: A Review.

Science.gov (United States)

Chaudhari, Atul A; Vig, Komal; Baganizi, Dieudonné Radé; Sahu, Rajnish; Dixit, Saurabh; Dennis, Vida; Singh, Shree Ram; Pillai, Shreekumar R

2016-11-25

Over centuries, the field of regenerative skin tissue engineering has had several advancements to facilitate faster wound healing and thereby restoration of skin. Skin tissue regeneration is mainly based on the use of suitable scaffold matrices. There are several scaffold types, such as porous, fibrous, microsphere, hydrogel, composite and acellular, etc., with discrete advantages and disadvantages. These scaffolds are either made up of highly biocompatible natural biomaterials, such as collagen, chitosan, etc., or synthetic materials, such as polycaprolactone (PCL), and poly-ethylene-glycol (PEG), etc. Composite scaffolds, which are a combination of natural or synthetic biomaterials, are highly biocompatible with improved tensile strength for effective skin tissue regeneration. Appropriate knowledge of the properties, advantages and disadvantages of various biomaterials and scaffolds will accelerate the production of suitable scaffolds for skin tissue regeneration applications. At the same time, emphasis on some of the leading challenges in the field of skin tissue engineering, such as cell interaction with scaffolds, faster cellular proliferation/differentiation, and vascularization of engineered tissues, is inevitable. In this review, we discuss various types of scaffolding approaches and biomaterials used in the field of skin tissue engineering and more importantly their future prospects in skin tissue regeneration efforts.

Current Advancements and Strategies in Tissue Engineering for Wound Healing: A Comprehensive Review.

Science.gov (United States)

Ho, Jasmine; Walsh, Claire; Yue, Dominic; Dardik, Alan; Cheema, Umber

2017-06-01

Significance: With an aging population leading to an increase in diabetes and associated cutaneous wounds, there is a pressing clinical need to improve wound-healing therapies. Recent Advances: Tissue engineering approaches for wound healing and skin regeneration have been developed over the past few decades. A review of current literature has identified common themes and strategies that are proving successful within the field: The delivery of cells, mainly mesenchymal stem cells, within scaffolds of the native matrix is one such strategy. We overview these approaches and give insights into mechanisms that aid wound healing in different clinical scenarios. Critical Issues: We discuss the importance of the biomimetic niche, and how recapitulating elements of the native microenvironment of cells can help direct cell behavior and fate. Future Directions: It is crucial that during the continued development of tissue engineering in wound repair, there is close collaboration between tissue engineers and clinicians to maintain the translational efficacy of this approach.

NJB VOL.34 Original Lower.cdr

African Journals Online (AJOL)

important sources of renewable biological ... The plantain (Musa paradisiaca) and banana chemicals (Nowak et ... fermentable sugars available for bio-ethanol ..... peels. Afr. J. Biochem. Res. 9(9): 104 - 109. 70. Osho et al./ Nig. J. Biotech. Vol.

Central African Journal of Medicine - Vol 60, No 9-12 (2016)

African Journals Online (AJOL)

Central African Journal of Medicine - Vol 60, No 9-12 (2016). Journal Home > Archives > Vol 60, No 9-12 (2016). Supplementary Issue. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

Ambulatory Antibiotic Stewardship through a Human Factors Engineering Approach: A Systematic Review.

Science.gov (United States)

Keller, Sara C; Tamma, Pranita D; Cosgrove, Sara E; Miller, Melissa A; Sateia, Heather; Szymczak, Julie; Gurses, Ayse P; Linder, Jeffrey A

2018-01-01

In the United States, most antibiotics are prescribed in ambulatory settings. Human factors engineering, which explores interactions between people and the place where they work, has successfully improved quality of care. However, human factors engineering models have not been explored to frame what is known about ambulatory antibiotic stewardship (AS) interventions and barriers and facilitators to their implementation. We conducted a systematic review and searched OVID MEDLINE, Embase, Scopus, Web of Science, and CINAHL to identify controlled interventions and qualitative studies of ambulatory AS and determine whether and how they incorporated principles from a human factors engineering model, the Systems Engineering Initiative for Patient Safety 2.0 model. This model describes how a work system (ambulatory clinic) contributes to a process (antibiotic prescribing) that leads to outcomes. The work system consists of 5 components, tools and technology, organization, person, tasks, and environment, within an external environment. Of 1,288 abstracts initially identified, 42 quantitative studies and 17 qualitative studies met inclusion criteria. Effective interventions focused on tools and technology (eg, clinical decision support and point-of-care testing), the person (eg, clinician education), organization (eg, audit and feedback and academic detailing), tasks (eg, delayed antibiotic prescribing), the environment (eg, commitment posters), and the external environment (media campaigns). Studies have not focused on clinic-wide approaches to AS. A human factors engineering approach suggests that investigating the role of the clinic's processes or physical layout or external pressures' role in antibiotic prescribing may be a promising way to improve ambulatory AS. © Copyright 2018 by the American Board of Family Medicine.

Book Review Microfinance: Perils and Prospects

African Journals Online (AJOL)

African Review of Economics and Finance, Vol 4, No. 2, June ... This book explores the perils and prospects of microfinance by looking at the issue ... qualitative data, and a list of references that could be useful to readers who want to learn ...

United States Air Force Civil Engineering Additive Manufacturing Applications: Tools and Jigs

Science.gov (United States)

2016-03-24

Its Potential Impact on Biotechnology and the Chemical Sciences. Analytical Chemistry, Vol. 86, 3240-3253. Halterman, T. (2014, August 28). 3D...2015). 3D Printing Makes Explosive Headway at AFIT. Civil Engineer Magazine , 23(1), 34-35. Smiths Detection. (2015). LCD 3.2E Handheld CWA & TIC...the Fleet’ Program. National Defense Magazine . Tan, A. (2014, Summer). Advanced Ordnance Teaching Materials. The Journal of ERW and Mine Action, 39

Research Program Peer Review: Purposes, Principles, Practices, Protocols

Science.gov (United States)

2004-06-01

Statement 1994-95. Canberra: AGPS. Cook- Deegan , R.M. Merit Review for Federally Funded Science and Technology: A White Paper for the Council of the...18p. Craig -B, "SPE Peer-Review Critique", JOURNAL OF PETROLEUM TECHNOLOGY, 1994, Vol 46, Iss 7, pp 563-563 Cram-DL Stebbins-M Eom-HS Ratto-N

Report of the evaluation by the Ad Hoc Review Committee on Computational Science and Engineering. Result evaluation in fiscal year 2000

International Nuclear Information System (INIS)

2001-06-01

The Research Evaluation Committee, which consisted of 14 members from outside of the Japan Atomic Energy Research Institute (JAERI), set up an Ad Hoc Review Committee on Computational Science and Engineering in accordance with the 'Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations in order to evaluate the R and D accomplishments achieved for five years from Fiscal Year 1995 to Fiscal Year 1999 at Center for Promotion of Computational Science and Engineering of JAERI. The Ad Hoc Review Committee consisted of seven specialists from outside of JAERI. The Ad Hoc Review Committee conducted its activities from December 2000 to March 2001. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Ad Hoc Review Committee meeting which was held on December 27, 2000, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Ad Hoc Review Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on March 16, 2001. This report describes the result of the evaluation by the Ad Hoc Review Committee on Computational Science and Engineering. (author)

Soil-structure interaction Vol.2. Influence of lift-off

International Nuclear Information System (INIS)

Miller, C.A.

1986-04-01

This study has been performed for the Nuclear Regulatory Commission (NRC) by the Structural Analysis Division of Brookhaven National Laboratory (BNL). The study was conducted during the fiscal year 1985 on the program entitled 'Benchmarking of Structural Engineering Problems' sponsored by NRC. The program considered three separate but complementary problems, each associated with the soil-structure interaction (SSI) phase of the seismic response analysis of nuclear plant facilities. The reports are presented in three separate volumes. The general title for the reports is 'Soil Structure Interaction' with the following subtitles: Vol. 1 Influence of Layering by A.J. Philippacopoulos, Vol. 2 Influence of Lift-Off by C.A. Miller, Vol. 3 Influence of Ground Water by C.J. Costantino. The two problems presented in Volumes 2 and 3 were conducted at the City University of New York (CUNY) under subcontract to BNL. This report, Volume 2 of the report, presents a summary of the work performed defining the influence liftoff has on the seismic response of nuclear power plant structures. The standard lumped parameter analysis method was modified by representing the lumped soil/structure interaction horizontal and rocking dampers with distributed (over the foundation area) springs and dampers. The distributed springs and dampers are then modified so that they can only transmit compressive stresses. Additional interaction damping is included to account for the energy dissipated as a portion of the foundation which has separated comes back into contact with the soil. The validity of the model is evaluated by comparing predictions made with it to data measured during the SIMQUAKE II experiment. The predictions were found to correlate quite well with the measured data except for some discrepancies at the higher frequencies (greater than 10 cps). This discrepancy was attributed to the relatively crude model used for impact effects. Data is presented which identifies the peak

Clinics in Mother and Child Health - Vol 5, No 1 (2008)

African Journals Online (AJOL)

Clinics in Mother and Child Health - Vol 5, No 1 (2008). Journal Home > Archives > Vol 5, No 1 (2008). Special Edition - Congress Abstracts. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

How Engineers Negotiate Domain Boundaries in a Complex, Interdisciplinary Engineering Project

Science.gov (United States)

Panther, Grace; Montfort, Devlin; Pirtle, Zachary

2017-01-01

Engineering educators have an essential role in preparing engineers to work in a complex, interdisciplinary workforce. While much engineering education focuses on teaching students to develop disciplinary expertise in specific engineering domains, there is a strong need to teach engineers about the knowledge that they develop or use in their work (Bucciarelli 1994, Allenby Sarewitz, 2011; Frodeman, 2013). The purpose of this research is to gain a better understanding of the knowledge systems of practicing engineers through observations of their practices such that the insights learned can guide future education efforts. Using an example from a complex and interdisciplinary engineering project, this paper presents a case study overviewing the types of epistemological (or knowledge-acquiring or using) complexities that engineers navigate. Specifically, we looked at a discussion of the thermal design of a CubeSat that occurred during an engineering review at NASA. We analyzed the review using a framework that we call 'peak events', or pointed discussions between reviewers, project engineers, and managers. We examined the dialog within peak events to identify the ways that knowledge was brought to bear, highlighting discussions of uncertainty and the boundaries of knowledge claims. We focus on one example discussion surrounding the thermal design of the CubeSat, which provides a particularly thorough example of a knowledge system since the engineers present explained, justified, negotiated, and defended knowledge within a social setting. Engineering students do not get much practice or instruction in explicitly negotiating knowledge systems and epistemic standards in this way. We highlight issues that should matter to engineering educators, such as the need to discuss what level of uncertainty is sufficient and the need to negotiate boundaries of system responsibility. Although this analysis is limited to a single discussion or 'peak event', our case shows that this

Review of Southern African Studies

African Journals Online (AJOL)

Review of Southern African Studies is a multidisciplinary journal of Arts, Social and Behavioural Sciences. Vol 13, No 1 (2009). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Table of Contents. Articles. Health-Care Waste Practices in Selected Health-Care Facilities in Maseru ...

Proceedings of the Seventh Conference of Nuclear Sciences and Applications. Vol.1,2,3

International Nuclear Information System (INIS)

Aly, H.F.

2000-01-01

The publication has been set up as a textbook for nuclear sciences and applications vol.1: (1) radiochemistry; (2) radiation chemistry; (3) isotope production; (4) waste management; vol.2: (1) nuclear and reactor; (2) physics; (3) plasma physics; (4) instrumentation and devices; (5) trace and ultra trace analysis; (6) environmental; vol.3: (1) radiation protection; (2) radiation health hazards; (3) nuclear safety; (4) biology; (5) agriculture

Proceedings of the Seventh Conference of Nuclear Sciences and Applications. Vol.1,2,3

Energy Technology Data Exchange (ETDEWEB)

Aly, H F [ed.

2000-07-01

The publication has been set up as a textbook for nuclear sciences and applications vol.1: (1) radiochemistry; (2) radiation chemistry; (3) isotope production; (4) waste management; vol.2: (1) nuclear and reactor; (2) physics; (3) plasma physics; (4) instrumentation and devices; (5) trace and ultra trace analysis; (6) environmental; vol.3: (1) radiation protection; (2) radiation health hazards; (3) nuclear safety; (4) biology; (5) agriculture.

Proceedings of the second international conference on environmental impact assessment of all economical activities. Vol. 1

International Nuclear Information System (INIS)

1993-01-01

Proceedings of the conference consist of 3 volumes: Vol. 1 - 'Environmental Impact Assessment of all Economical Activities including Industry'; Vol. 2 - 'Air Pollution Control and Prevention'; Vol. 3 - Waste Management and Environmental Problems in Construction Industry'. Out of 32 papers contained in Vol. 1, 2 were inputted to INIS. They deal with models of radionuclide transport in food chains and the use of aerial monitoring in the study of environmental contamination. (Z.S.)

Multiple Learning Strategies Project. Building Maintenance & Engineering. Educable Mentally Impaired. [Vol. 2.

Science.gov (United States)

Constantini, Debra; And Others

This instructional package is one of three designed for educable mentally impaired students in the vocational area of building maintenance and engineering. The thirty-four learning modules are organized into six units: general maintenance tasks; restrooms; chalkboards; carpet care; office cleaning; and grounds. Each module includes these elements:…

Author Details

African Journals Online (AJOL)

Bello-Zakari, B. Vol 34, No 4 (2015) - Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum & Production Engineering Hydroprocessing Microalgae Derived Hydrothermal Liquefaction Bio-Crude for Middle Distillate Fuels Production – A Review Abstract PDF. ISSN: 2467-8821. AJOL African Journals Online.

Radiotracers in medical applications, vols 1-2

International Nuclear Information System (INIS)

Rayudu, G.V.S.

1983-01-01

These volumes will serve as a basis for instruction and reference for professionals such as radiopharmaceutical chemists, radiopharmacologists, radiopharmacists, radiobiochemists, and others involved in the medical applications of radiotracers. Vol. I: Topics include radiohalogenated compounds, including radioiodine; Tc-labeled compounds; and in-house prepared radiopharmaceuticals. The charge particle range vs. energy in every element is tabulated for protons for cyclotrons users. Discussions are also provided on nonimaging radiotracer methods; 11 C, 13 N, 15 O, 67 Ga. 111 In, 75 Se, /SUP 123m/ Te compounds; radioactive noble gases; and miscellaneous radiotracers for imaging. Vol. II: Pertinent nuclear science data such as radiation dosimetry, radionuclide production modes, radionuclides for therapy, human experimentation regulations and consent forms, and radiotracer laboratory designs are presented

Engine Tune-Up Service. Unit 3: Primary Circuit. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the exercises and pretests is testing the primary ignition circuit. Pretests and performance checklists are provided for each of the eight performance objectives…

Engine Tune-up Service. Unit 2: Charging System. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the exercises and pretests is testing the charging system. Pretests and performance checklists are provided for each of the three performance objectives contained in…

Engine Tune-up Service. Unit 4: Secondary Circuit. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the exercises and pretests is testing and servicing the secondary ignition circuit. Pretests and performance checklists are provided for each of the seven…

Genome scale engineering techniques for metabolic engineering.

Science.gov (United States)

Liu, Rongming; Bassalo, Marcelo C; Zeitoun, Ramsey I; Gill, Ryan T

2015-11-01

Metabolic engineering has expanded from a focus on designs requiring a small number of genetic modifications to increasingly complex designs driven by advances in genome-scale engineering technologies. Metabolic engineering has been generally defined by the use of iterative cycles of rational genome modifications, strain analysis and characterization, and a synthesis step that fuels additional hypothesis generation. This cycle mirrors the Design-Build-Test-Learn cycle followed throughout various engineering fields that has recently become a defining aspect of synthetic biology. This review will attempt to summarize recent genome-scale design, build, test, and learn technologies and relate their use to a range of metabolic engineering applications. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Multiple Learning Strategies Project. Building Maintenance & Engineering. Educable Mentally Impaired. [Vol. 1.

Science.gov (United States)

Smith, Dwight; And Others

This instructional package is one of three designed for educable mentally impaired students in the vocational area of building maintenance and engineering. The thirty learning modules are organized into two units: floor care and general maintenance tasks. Each module includes these elements: a performance objective page which tells the student…

COBRA System Engineering Processes to Achieve SLI Strategic Goals

Science.gov (United States)

Ballard, Richard O.

2003-01-01

The COBRA Prototype Main Engine Development Project was an endeavor conducted as a joint venture between Pratt & Whitney and Aerojet to conduct risk reduction in LOX/LH2 main engine technology for the NASA Space Launch Initiative (SLI). During the seventeen months of the project (April 2001 to September 2002), approximately seventy reviews were conducted, beginning with the Engine Systems Requirements Review (SRR) and ending with the Engine Systems Interim Design Review (IDR). This paper discusses some of the system engineering practices used to support the reviews and the overall engine development effort.

Smart Polymeric Hydrogels for Cartilage Tissue Engineering: A Review on the Chemistry and Biological Functions.

Science.gov (United States)

Eslahi, Niloofar; Abdorahim, Marjan; Simchi, Abdolreza

2016-11-14

Stimuli responsive hydrogels (SRHs) are attractive bioscaffolds for tissue engineering. The structural similarity of SRHs to the extracellular matrix (ECM) of many tissues offers great advantages for a minimally invasive tissue repair. Among various potential applications of SRHs, cartilage regeneration has attracted significant attention. The repair of cartilage damage is challenging in orthopedics owing to its low repair capacity. Recent advances include development of injectable hydrogels to minimize invasive surgery with nanostructured features and rapid stimuli-responsive characteristics. Nanostructured SRHs with more structural similarity to natural ECM up-regulate cell-material interactions for faster tissue repair and more controlled stimuli-response to environmental changes. This review highlights most recent advances in the development of nanostructured or smart hydrogels for cartilage tissue engineering. Different types of stimuli-responsive hydrogels are introduced and their fabrication processes through physicochemical procedures are reported. The applications and characteristics of natural and synthetic polymers used in SRHs are also reviewed with an outline on clinical considerations and challenges.

Experimental study of hydrogen as a fuel additive in internal combustion engines

Energy Technology Data Exchange (ETDEWEB)

Saanum, Inge

2008-07-01

Combustion of hydrocarbons in internal combustion engines results in emissions that can be harmful both to human health and to the environment. Although the engine technology is improving, the emissions of NO{sub x}, PM and UHC are still challenging. Besides, the overall consumption of fossil fuel and hence the emissions of CO{sub 2} are increasing because of the increasing number of vehicles. This has lead to a focus on finding alternative fuels and alternative technologies that may result in lower emissions of harmful gases and lower CO{sub 2} emissions. This thesis treats various topics that are relevant when using blends of fuels in different internal combustion engine technologies, with a particular focus on using hydrogen as a fuel additive. The topics addressed are especially the ones that impact the environment, such as emissions of harmful gases and thermal efficiency (fuel consumption). The thesis is based on experimental work performed at four different test rigs: 1. A dynamic combustion rig with optical access to the combustion chamber where spark ignited premixed combustion could be studied by means of a Schlieren optical setup and a high speed video camera. 2. A spark ignition natural gas engine rig with an optional exhaust gas recycling system. 3. A 1-cylinder diesel engine prepared for homogeneous charge compression ignition combustion. 4. A 6-cylinder standard diesel engine The engine rigs were equipped with cylinder pressure sensors, engine dynamometers, exhaust gas analyzers etc. to enable analyses of the effects of different fuels. The effect of hydrogen blended with methane and natural gas in spark ignited premixed combustion was investigated in the dynamic combustion rig and in a natural gas engine. In the dynamic combustion rig, the effect of hydrogen added to methane on the flame speed and the flame structure was investigated at elevated pressure and temperature. A considerable increase in the flame speed was observed when adding 30 vol

A Century on the Mississippi: A History of the Memphis District, U.S. Army Corps of Engineers, 1876-1976

Science.gov (United States)

1976-01-01

and Tongue OrnamenlCd with Jelly noned Turkey, Champagne Jelly Cream wllh IIpple Jelly nOlUD Mutton Country Ham Turkey Tongue CONDIMENTS Corned...Engineers. Vol. CXIII (1948) , pp. 1-15. McCormick , Robert R. " Steamboat Years." Memphis Public Library. Reprint of an Address Given Over the

Book review Information and Communication Technologies for ...

African Journals Online (AJOL)

Book review. Information and Communication Technologies for Development in Africa: Volume 2. The Experience with Community Telecentres By Florence Etta and Sheila Parvyn-Wamahiu (2003). Kibet A Ngetich. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 254-256.

African Sociological Review / Revue Africaine de Sociologie

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 20, No 1 (2016) >. Log in or Register to get access to full text downloads.

African Sociological Review / Revue Africaine de Sociologie

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 16, No 2 (2012) >. Log in or Register to get access to full text downloads.

Editorial | Oloyede | African Sociological Review / Revue Africaine ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 21, No 1 (2017) >. Log in or Register to get access to full text downloads.

African Sociological Review / Revue Africaine de Sociologie

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 19, No 1 (2015) >. Log in or Register to get access to full text downloads.

Editorial | Oloyede | African Sociological Review / Revue Africaine ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 19, No 2 (2015) >. Log in or Register to get access to full text downloads.

Third Worldism | Nash | African Sociological Review / Revue ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 7, No 1 (2003) >. Log in or Register to get access to full text downloads.

Editorial | Oloyede | African Sociological Review / Revue Africaine ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 19, No 1 (2015) >. Log in or Register to get access to full text downloads.

Future Prospects for Scaffolding Methods and Biomaterials in Skin Tissue Engineering: A Review

Directory of Open Access Journals (Sweden)

Atul A. Chaudhari

2016-11-01

Full Text Available Over centuries, the field of regenerative skin tissue engineering has had several advancements to facilitate faster wound healing and thereby restoration of skin. Skin tissue regeneration is mainly based on the use of suitable scaffold matrices. There are several scaffold types, such as porous, fibrous, microsphere, hydrogel, composite and acellular, etc., with discrete advantages and disadvantages. These scaffolds are either made up of highly biocompatible natural biomaterials, such as collagen, chitosan, etc., or synthetic materials, such as polycaprolactone (PCL, and poly-ethylene-glycol (PEG, etc. Composite scaffolds, which are a combination of natural or synthetic biomaterials, are highly biocompatible with improved tensile strength for effective skin tissue regeneration. Appropriate knowledge of the properties, advantages and disadvantages of various biomaterials and scaffolds will accelerate the production of suitable scaffolds for skin tissue regeneration applications. At the same time, emphasis on some of the leading challenges in the field of skin tissue engineering, such as cell interaction with scaffolds, faster cellular proliferation/differentiation, and vascularization of engineered tissues, is inevitable. In this review, we discuss various types of scaffolding approaches and biomaterials used in the field of skin tissue engineering and more importantly their future prospects in skin tissue regeneration efforts.

Established Osteoporosis and Gaps in the Management: Review ...

African Journals Online (AJOL)

Annals of Medical and Health Sciences Research | Mar-Apr 2014 | Vol 4 | Issue 2 |. Address for ... More efforts are needed to fill this large gap in the correct management of osteoporosis related fractures .... Systematic review: Comparative.

Quantitative Review and Distribution Status of Mangrove Forest ...

African Journals Online (AJOL)

African Research Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 2 (2010) >. Log in or Register to get access to full text downloads.

Knee Ligament Injury and the Clinical Application of Tissue Engineering Techniques: A Systematic Review.

Science.gov (United States)

Riley, Thomas C; Mafi, Reza; Mafi, Pouya; Khan, Wasim S

2018-02-23

The incidence of knee ligament injury is increasing and represents a significant cost to healthcare providers. Current interventions include tissue grafts, suture repair and non-surgical management. These techniques have demonstrated good patient outcomes but have been associated graft rejection, infection, long term immobilization and reduced joint function. The limitations of traditional management strategies have prompted research into tissue engineering of knee ligaments. This paper aims to evaluate whether tissue engineering of knee ligaments offers a viable alternative in the clinical management of knee ligament injuries. A search of existing literature was performed using OVID Medline, Embase, AMED, PubMed and Google Scholar, and a manual review of citations identified within these papers. Silk, polymer and extracellular matrix based scaffolds can all improve graft healing and collagen production. Fibroblasts and stem cells demonstrate compatibility with scaffolds, and have been shown to increase organized collagen production. These effects can be augmented using growth factors and extracellular matrix derivatives. Animal studies have shown tissue engineered ligaments can provide the biomechanical characteristics required for effective treatment of knee ligament injuries. There is a growing clinical demand for a tissue engineered alternative to traditional management strategies. Currently, there is limited consensus regarding material selection for use in tissue engineered ligaments. Further research is required to optimize tissue engineered ligament production before clinical application. Controlled clinical trials comparing the use of tissue engineered ligaments and traditional management in patients with knee ligament injury could determine whether they can provide a cost-effective alternative. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Diesel reformulation using bio-derived propanol to control toxic emissions from a light-duty agricultural diesel engine.

Science.gov (United States)

Thillainayagam, Muthukkumar; Venkatesan, Krishnamoorthy; Dipak, Rana; Subramani, Saravanan; Sethuramasamyraja, Balaji; Babu, Rajesh Kumar

2017-07-01

In the Indian agricultural sector, millions of diesel-driven pump-sets were used for irrigation purposes. These engines produce carcinogenic diesel particulates, toxic nitrogen oxides (NOx), and carbon monoxide (CO) emissions which threaten the livelihood of large population of farmers in India. The present study investigates the use of n-propanol, a less-explored high carbon bio-alcohol that can be produced by sustainable pathways from industrial and crop wastes that has an attractive opportunity for powering stationary diesel engines meant for irrigation and rural electrification. This study evaluates the use of n-propanol addition in fossil diesel by up to 30% by vol. and concurrently reports the effects of exhaust gas recirculation (EGR) on emissions of an agricultural DI diesel engine. Three blends PR10, PR20, and PR30 were prepared by mixing 10, 20, and 30% by vol. of n-propanol with fossil diesel. Results when compared to baseline diesel case indicated that smoke density reduced with increasing n-propanol fraction in the blends. PR10, PR20, and PR30 reduced smoke density by 13.33, 33.33, and 60%, respectively. NOx emissions increased with increasing n-propanol fraction in the blends. Later, three EGR rates (10, 20, and 30%) were employed. At any particular EGR rate, smoke density remained lower with increasing n-propanol content in the blends under increasing EGR rates. NOx reduced gradually with EGR. At 30% EGR, the blends PR10, PR20, and PR30 reduced NOx emissions by 43.04, 37.98, and 34.86%, respectively when compared to baseline diesel. CO emissions remained low but hydrocarbon (HC) emissions were high for n-propanol/diesel blends under EGR. Study confirmed that n-propanol could be used by up to 30% by vol. with diesel and the blends delivered lower soot density, NOx, and CO emissions under EGR.

Updating Human Factors Engineering Guidelines for Conducting Safety Reviews of Nuclear Power Plants

International Nuclear Information System (INIS)

O'Hara, J.M.; Higgins, J.; Fleger, Stephen

2011-01-01

The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. This paper describes the role of HFE guidelines in the safety review process and the content of the key HFE guidelines used. Then we will present the methodology used to develop HFE guidance and update these documents, and describe the current status of the update program.

Engineering Changes in Product Design - A Review

Science.gov (United States)

Karthik, K.; Janardhan Reddy, K., Dr

2016-09-01

Changes are fundamental to product development. Engineering changes are unavoidable and can arise at any phase of the product life cycle. The consideration of market requirements, customer/user feedbacks, manufacturing constraints, design innovations etc., turning them into viable products can be accomplished when product change is managed properly. In the early design cycle, informal changes are accepted. However, changes become formal when its complexity and cost increases, and as product matures. To maximize the market shares, manufacturers have to effectively and efficiently manage engineering changes by means of Configuration Control. The paper gives a broad overview about ‘Engineering Change Management’ (ECM) through configuration management and its implications in product design. The aim is to give an idea and understanding about the engineering changes in product design scenario to the new researchers. This paper elaborates the significant aspect of managing the engineering changes and the importance of ECM in a product life cycle.

Proceedings of the 1. Arabic conference on chemical applications (Chemia 2). Vol. 2

International Nuclear Information System (INIS)

1997-11-01

The conference of chemical application was held on 1-5 Nov 1997 in Cairo, This vol.2 contains of chemical application on nuclear materials. Studies on these vol.This second volume covers papers presented on the subjects

Proceedings of the second international conference on environmental impact assessment of all economical activities. Vol. 2

International Nuclear Information System (INIS)

1993-01-01

Proceedings of the conference consist of 3 volumes: Vol. 1 - 'Environmental Impact Assessment of all Economical Activities including Industry'; Vol. 2 - 'Air Pollution Control and Prevention'; Vol. 3 - Waste Management and Environmental Problems in Construction Industry'. Out of 32 papers contained in Vol. 2, 4 were inputted to INIS. They deal with nuclear fusion as a potential energy source, with environmental aspects of disposal of ashes from power plants in the Czech Republic, and with land reclamation after mining activities. (Z.S.)

Microscopic colitis: an evolving spectrum: review | Wright | South ...

African Journals Online (AJOL)

South African Gastroenterology Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2 (2004) >. Log in or Register to get access to full text downloads.

The irritable bowel syndrome: clinical review | Watermeyer | South ...

African Journals Online (AJOL)

South African Gastroenterology Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 1, No 1 (2003) >. Log in or Register to get access to full text downloads.

Software Engineering and Knowledge Engineering Theory and Practice Volume 2

CERN Document Server

2012-01-01

The volume includes a set of selected papers extended and revised from the I2009 Pacific-Asia Conference on Knowledge Engineering and Software Engineering (KESE 2009) was held on December 19~ 20, 2009, Shenzhen, China.   Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Knowledge Engineering and Communication Technology to disseminate their latest research results and exchange views on the future research directions of these fields. 135 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Yanwen Wu.   On behalf of the this volume, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Knowledge Engineering and Communication Technology. 

Genetic Engineering

Science.gov (United States)

Phillips, John

1973-01-01

Presents a review of genetic engineering, in which the genotypes of plants and animals (including human genotypes) may be manipulated for the benefit of the human species. Discusses associated problems and solutions and provides an extensive bibliography of literature relating to genetic engineering. (JR)

Concise Review: Human Dermis as an Autologous Source of Stem Cells for Tissue Engineering and Regenerative Medicine.

Science.gov (United States)

Vapniarsky, Natalia; Arzi, Boaz; Hu, Jerry C; Nolta, Jan A; Athanasiou, Kyriacos A

2015-10-01

The exciting potential for regenerating organs from autologous stem cells is on the near horizon, and adult dermis stem cells (DSCs) are particularly appealing because of the ease and relative minimal invasiveness of skin collection. A substantial number of reports have described DSCs and their potential for regenerating tissues from mesenchymal, ectodermal, and endodermal lineages; however, the exact niches of these stem cells in various skin types and their antigenic surface makeup are not yet clearly defined. The multilineage potential of DSCs appears to be similar, despite great variability in isolation and in vitro propagation methods. Despite this great potential, only limited amounts of tissues and clinical applications for organ regeneration have been developed from DSCs. This review summarizes the literature on DSCs regarding their niches and the specific markers they express. The concept of the niches and the differentiation capacity of cells residing in them along particular lineages is discussed. Furthermore, the advantages and disadvantages of widely used methods to demonstrate lineage differentiation are considered. In addition, safety considerations and the most recent advancements in the field of tissue engineering and regeneration using DSCs are discussed. This review concludes with thoughts on how to prospectively approach engineering of tissues and organ regeneration using DSCs. Our expectation is that implementation of the major points highlighted in this review will lead to major advancements in the fields of regenerative medicine and tissue engineering. Autologous dermis-derived stem cells are generating great excitement and efforts in the field of regenerative medicine and tissue engineering. The substantial impact of this review lies in its critical coverage of the available literature and in providing insight regarding niches, characteristics, and isolation methods of stem cells derived from the human dermis. Furthermore, it provides

Design and implementation of Metta, a metasearch engine for biomedical literature retrieval intended for systematic reviewers.

Science.gov (United States)

Smalheiser, Neil R; Lin, Can; Jia, Lifeng; Jiang, Yu; Cohen, Aaron M; Yu, Clement; Davis, John M; Adams, Clive E; McDonagh, Marian S; Meng, Weiyi

2014-01-01

Individuals and groups who write systematic reviews and meta-analyses in evidence-based medicine regularly carry out literature searches across multiple search engines linked to different bibliographic databases, and thus have an urgent need for a suitable metasearch engine to save time spent on repeated searches and to remove duplicate publications from initial consideration. Unlike general users who generally carry out searches to find a few highly relevant (or highly recent) articles, systematic reviewers seek to obtain a comprehensive set of articles on a given topic, satisfying specific criteria. This creates special requirements and challenges for metasearch engine design and implementation. We created a federated search tool that is connected to five databases: PubMed, EMBASE, CINAHL, PsycINFO, and the Cochrane Central Register of Controlled Trials. Retrieved bibliographic records were shown online; optionally, results could be de-duplicated and exported in both BibTex and XML format. The query interface was extensively modified in response to feedback from users within our team. Besides a general search track and one focused on human-related articles, we also added search tracks optimized to identify case reports and systematic reviews. Although users could modify preset search options, they were rarely if ever altered in practice. Up to several thousand retrieved records could be exported within a few minutes. De-duplication of records returned from multiple databases was carried out in a prioritized fashion that favored retaining citations returned from PubMed. Systematic reviewers are used to formulating complex queries using strategies and search tags that are specific for individual databases. Metta offers a different approach that may save substantial time but which requires modification of current search strategies and better indexing of randomized controlled trial articles. We envision Metta as one piece of a multi-tool pipeline that will assist

Using Model-Based System Engineering to Provide Artifacts for NASA Project Life-Cycle and Technical Reviews Presentation

Science.gov (United States)

Parrott, Edith L.; Weiland, Karen J.

2017-01-01

This is the presentation for the AIAA Space conference in September 2017. It highlights key information from Using Model-Based Systems Engineering to Provide Artifacts for NASA Project Life-cycle and Technical Reviews paper.

Estimating transmitted waves of floating breakwater using support vector regression model

Digital Repository Service at National Institute of Oceanography (India)

Mandal, S.; Hegde, A.V.; Kumar, V.; Patil, S.G.

is first mapped onto an m-dimensional feature space using some fixed (nonlinear) mapping, and then a linear model is constructed in this feature space (Ivanciuc Ovidiu 2007). Using mathematical notation, the linear model in the feature space f(x, w... regressive vector machines, Ocean Engineering Journal, Vol – 36, pp 339 – 347, 2009. 3. Ivanciuc Ovidiu, Applications of support vector machines in chemistry, Review in Computational Chemistry, Eds K. B. Lipkouitz and T. R. Cundari, Vol – 23...

A review: Self-healing in cementitious materials and engineered cementitious composite as a self-healing material

DEFF Research Database (Denmark)

Wu, Min; Johannesson, Björn; Geiker, Mette

2012-01-01

.e. the use of hollow fibers, microencapsulation, expansive agents and mineral admixtures, bacteria and shape memory materials, are reviewed and summarized. A comparison study is conducted subsequently on different strategies to self-healing and on different healing agents used as well. Engineered...

Technical issues related to NUREG 0800, Chapter 18: Human Factors Engineering/Standard Review Plan

International Nuclear Information System (INIS)

Savage, J.W.

1982-01-01

The revision of Chapter 18 of NUREG 0800, Human Factors Engineering Standard Review Plan (SRP) will be based on SECY 82-111 and guidance contained in NUREG 0700, NUREG 0801 and NUREG 0835, plus other references. In conducting field reviews of control rooms, the NRC has identified technical issues which can be used to enhance the development of the revised version of NUREG 0800, and to establish priorities among the list of possible Branch Technical Positions (BTP) in NUREG 0800, Rev. 0, Table 18.0-2. This report is a compilation of comments and suggestions from the people who used NUREG 0700 in the Control Room field reviews. This information was used to establish possible BTP topic priorities so that the most important BTPs could be issued first. The comments and suggestions are included for HFEB review in conjunction with the table of priorities

Acquisition Review Quarterly (ARQ) Vol. 4, No. 4

National Research Council Canada - National Science Library

1997-01-01

The primary goal of the Acquisition Review quarterly (ARQ) is to provide practicing acquisition professionals with relevant management tools and information based on recent advances in policy, management theory, and research...

Chinese goods reshape Africa | Kernen | African Review of ...

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 1 (2016) >. Log in or Register to get access to full text downloads.

Editorial | Park | African Review of Economics and Finance

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 1 (2016) >. Log in or Register to get access to full text downloads.

Book Review - International Migration and Development in Sub ...

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 5, No 1 (2013) >. Log in or Register to get access to full text downloads.

Control of combustion generated emissions from spark ignition engines: a review

International Nuclear Information System (INIS)

Mansha, M.; Shahid, E.M.; Qureshi, A.H.

2012-01-01

For the past several decades automobiles have been a major source of ground level emissions of various pollutants like CO, HC, NO/sub x/, SO/sub x/ CO/sub 2/, etc. Due to their dangerous effects on human health, vegetation and on climate, various pre combustion, in-cylinder and post. combustion techniques have been tried for their abatement. This paper reviews all of the workable measures taken so far to controlling the combustion generated emissions from 4-stroke Spark Ignition Vehicular Engines ever since the promulgation of emission control legislation/standards and their subsequent enforcement in the late 1960s. (author)

Clay-based materials for engineered barriers: a review

International Nuclear Information System (INIS)

Lajudie, A.; Raynal, J.; Petit, J.C.; Toulhoat, P.

1994-01-01

The potential importance of backfilling and plugging in underground radioactive waste repositories has led different research institutions to carry out extensive studies of swelling clay materials for the development of engineered barriers in underground conditions. These materials should combine a variety of hydro-thermo-mechanical and geochemical properties: impermeability, swelling ability in order to fill all void space, heat transfer and retention capacity for the most noxious radionuclides. Smectite clays best exhibit these properties and most of the research effort has been devoted to this type of materials. In this paper, mineralogical composition, sodium or calcium content, thermo-hydro-mechanical properties, swelling pressure, hydraulic and thermal conductivity, and chemical properties of five smectite clays selected by five major nuclear countries are reviewed: Avonseal montmorillonite (Canada), MX 80 montmorillonite (Sweden), Montigel montmorillonite (Switzerland), S-2 montmorillonite (Spain), and Fo-Ca inter stratified kaolinite/beidellite (France). (J.S.). 29 refs., 5 figs., 3 tabs

Review Article: Hazards of Chaotic Importation, Certification ...

African Journals Online (AJOL)

Review Article: Hazards of Chaotic Importation, Certification, Distribution and Marketing of Medical Laboratory Consumables in Nigeria. BC Nlemadim. Abstract. No abstract. Journal of Medical Laboratory Science Vol.12(2) 2003: 25 - 27. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT ...

Synthesis and applications of nano-structured iron oxides/hydroxides

African Journals Online (AJOL)

... in numerous synthesis processes. This review outlines the work being carried out on synthesis of iron oxides in nano form and their various applications. Keywords: nano iron oxides, synthesis, catalysts, magnetic properties, biomedical application. International Journal of Engineering, Science and Technology, Vol. 2, No.

AFRREV STECH

African Journals Online (AJOL)

User

flows are necessary for safe, effective and economical engineering designs. This paper presents ..... equal to L/B = 1 on the basis of a short review of the state of art. The breadth (B) to .... Aeronautical and Space Sci., 1968, Vol.16, p. 1-5. 10.

Engine Tune-up Service. Unit 6: Emission Control Systems. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the exercises and pretests is inspecting, testing, and servicing emission control systems. Pretests and performance checklists are provided for each of the…

Current management of chronic hepatitis B: review | Cariem | South ...

African Journals Online (AJOL)

South African Gastroenterology Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2 (2004) >. Log in or Register to get access to full text downloads.

Critical review on the physical and mechanical factors involved in tissue engineering of cartilage.

Science.gov (United States)

Gaut, Carrie; Sugaya, Kiminobu

2015-01-01

Articular cartilage defects often progress to osteoarthritis, which negatively impacts quality of life for millions of people worldwide and leads to high healthcare expenditures. Tissue engineering approaches to osteoarthritis have concentrated on proliferation and differentiation of stem cells by activation and suppression of signaling pathways, and by using a variety of scaffolding techniques. Recent studies indicate a key role of environmental factors in the differentiation of mesenchymal stem cells to mature cartilage-producing chondrocytes. Therapeutic approaches that consider environmental regulation could optimize chondrogenesis protocols for regeneration of articular cartilage. This review focuses on the effect of scaffold structure and composition, mechanical stress and hypoxia in modulating mesenchymal stem cell fate and the current use of these environmental factors in tissue engineering research.

A systematic review of applying modern software engineering techniques to developing robotic systems

Directory of Open Access Journals (Sweden)

Claudia Pons

2012-01-01

Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

Proceedings of the second international conference on environmental impact assessment of all economical activities. Vol. 3

International Nuclear Information System (INIS)

1993-01-01

Proceedings of the conference consist of 3 volumes: Vol. 1 - 'Environmental Impact Assessment of all Economical Activities including Industry'; Vol. 2 - 'Air Pollution Control and Prevention'; Vol. 3 - Waste Management and Environmental Problems in Construction Industry'. Out of 39 papers contained in Vol. 3, 3 were inputted to INIS. They deal with the use of portable radioisotope X-ray fluorescence analyzers in the determination of building material contamination by toxic elements, with underground waste repositories and ground water contamination, and the impact of the Temelin nuclear power plant on the hydrosphere and other environmental components. (Z.S.)

AJESMS_ Vol 8 2010 August 15 2011

African Journals Online (AJOL)

Prof. Mereku

2010-08-15

Aug 15, 2010 ... African Journal of Educational Studies in Mathematics and Sciences Vol. 8, 2010 ... environs, a mining area in Wassa West District of Ghana .... This finding is based on autopsy data and on reports showing that blood levels in.

Water SA - Vol 30, No 3 (2004)

African Journals Online (AJOL)

Application of a residential end-use model for estimating cold and hot water demand ... of multistage filtration using different filter media against conventional water ... (Germs et al., 2004), published in the April 2004 (Vol 30 No 2) issue of Water ...

Fabrication of High Thermal Conductivity NARloy-Z-Diamond Composite Combustion Chamber Liner for Advanced Rocket Engines

Science.gov (United States)

Bhat, Biliyar N.; Greene, Sandra E.; Singh, Jogender

2016-01-01

This paper describes the process development for fabricating a high thermal conductivity NARloy-Z-Diamond composite (NARloy-Z-D) combustion chamber liner for application in advanced rocket engines. The fabrication process is challenging and this paper presents some details of these challenges and approaches used to address them. Prior research conducted at NASA-MSFC and Penn State had shown that NARloy-Z-40%D composite material has significantly higher thermal conductivity than the state of the art NARloy-Z alloy. Furthermore, NARloy-Z-40 %D is much lighter than NARloy-Z. These attributes help to improve the performance of the advanced rocket engines. Increased thermal conductivity will directly translate into increased turbopump power, increased chamber pressure for improved thrust and specific impulse. Early work on NARloy-Z-D composites used the Field Assisted Sintering Technology (FAST, Ref. 1, 2) for fabricating discs. NARloy-Z-D composites containing 10, 20 and 40vol% of high thermal conductivity diamond powder were investigated. Thermal conductivity (TC) data. TC increased with increasing diamond content and showed 50% improvement over pure copper at 40vol% diamond. This composition was selected for fabricating the combustion chamber liner using the FAST technique.

Book review Information and Communication Technologies for ...

African Journals Online (AJOL)

Book review. Information and Communication Technologies for Development in Africa: Volume 2. The Experience with Community Telecentres By Florence Etta and Sheila Parvyn-Wamahiu (2003). Kibet A Ngetich. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 254-256. Article Metrics. No metrics ...

Analysis of volatile compounds from Iberian hams: a review

Directory of Open Access Journals (Sweden)

Narváez-Rivas, M.

2012-10-01

Full Text Available This article provides information on the study of the volatile compounds in raw and dry-cured Iberian hams. Different volatile compounds are identified and studies carried out by different authors are presented. This article reviews the analytical methods that have been used to determine the different volatiles of these samples. Furthermore, all volatile compounds identified (a total of 411 volatiles have been collected in several tables according to different series of compounds: hydrocarbons, aldehydes, ketones, alcohols, esters and ethers, lactones, terpenes and chloride compounds, nitrogenous compounds, sulfur compounds and carboxylic acids. This review can be useful in subsequent research due to the complexity of the study.

En este artículo se proporciona información sobre el estudio de los compuestos volátiles del jamón ibérico tanto fresco como curado. Se presentan los diferentes compuestos volátiles identificados por distintos autores. Además, se evalúan los métodos analíticos que han sido utilizados para determinar dichos compuestos volátiles en este tipo de muestras. Todos los compuestos identificados y descritos en esta revisión (un total de 411 compuestos volátiles han sido agrupados en diversas tablas de acuerdo a las diferentes familias a que pertenecen: hidrocarburos, aldehídos, cetonas, alcoholes, ésteres y éteres, lactonas, terpenos, compuestos halogenados, compuestos nitrogenados, compuestos de azufre y ácidos carboxílicos. Debido a la complejidad de este estudio, la presente revisión puede ser muy útil en investigaciones posteriores.

A Review of Multi-Sensory Technologies in a Science, Technology, Engineering, Arts and Mathematics (STEAM) Classroom

Science.gov (United States)

Taljaard, Johann

2016-01-01

This article reviews the literature on multi-sensory technology and, in particular, looks at answering the question: "What multi-sensory technologies are available to use in a science, technology, engineering, arts and mathematics (STEAM) classroom, and do they affect student engagement and learning outcomes?" Here engagement is defined…

ECONOMICS OF ALEXANDER THE GREAT (15 vols + 4 cdroms) by Gregory Zorzos

OpenAIRE

Gregory Zorzos

2002-01-01

Research contains many ancient texts (Ancient Greek, Hebrews, Hieroglyphs, Assyrian, Sumerian, Babylonian, Latin, etc.). 1. (MICRO-MACRO ECONOMICS OF ALEXANDER THE GREAT (5 vols + cdrom). Microeconomics and macroeconomics of Alexander the Great. Economic theories, feasibilities, economic plannings, general description of the campaign's business plan etc. 2. BANKS OF ALEXANDER THE GREAT (2 vols + cdrom) Describes banking system, economists, financiers, investors, accountants, bookkeepers, etc,...

Hidden in plain view: feminists doing engineering ethics, engineers doing feminist ethics.

Science.gov (United States)

Riley, Donna

2013-03-01

How has engineering ethics addressed gender concerns to date? How have the ideas of feminist philosophers and feminist ethicists made their way into engineering ethics? What might an explicitly feminist engineering ethics look like? This paper reviews some major themes in feminist ethics and then considers three areas in which these themes have been taken up in engineering ethics to date. First, Caroline Whitbeck's work in engineering ethics integrates considerations from her own earlier writings and those of other feminist philosophers, but does not use the feminist label. Second, efforts to incorporate the Ethic of Care and principles of Social Justice into engineering have drawn on feminist scholarship and principles, but these commitments can be lost in translation to the broader engineering community. Third, the film Henry's Daughters brings gender considerations into the mainstream of engineering ethics, but does not draw on feminist ethics per se; despite the best intentions in broaching a difficult subject, the film unfortunately does more harm than good when it comes to sexual harassment education. I seek not only to make the case that engineers should pay attention to feminist ethics and engineering ethicists make more use of feminist ethics traditions in the field, but also to provide some avenues for how to approach integrating feminist ethics in engineering. The literature review and analysis of the three examples point to future work for further developing what might be called feminist engineering ethics.

Reviews of the In-situ Demonstration Test of the Engineered Barrier System in Many Countries

Energy Technology Data Exchange (ETDEWEB)

Lee, Minsoo; Choi, Heui Joo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

Many nations considering the deep geologic disposal of HLW are now planning or executing in-situ demonstration experiments on their regional EBS (Engineering barrier system) at their deep underground research facilities. The main purpose of the in-situ EBS test is the experimental confirmation of its performance, and the prediction of its long-term evolution through the modeling of EBS based on the experimental data. Additionally, the engineering feasibility for the construction of an engineering barrier system can also be checked through full scale construction of an in-situ test. KAERI is currently preparing an in-situ test at a large 1/3 scale, called IN-DEBS (In-situ Demonstration of EBS) at KURT (KAERI Underground Research Tunnel) for the generic EBS suggested in A-KRS (Advanced KAERI Reference System), which was developed to treat the HLW from pyroprocessing. As the first step for the design of IN-DEBS, the foreign in-situ demonstrations of EBS were reviewed in this paper. The demonstration projects, which were completed or are still being executed in some countries such as Sweden, France, Finland, Canada, Belgium, Switzerland, Spain, and Japan, were surveyed and summarized. In particular, hardware constitutions such as the heating element or compact bentonite, and the experimental procedures, have focused more on reviews than on experimental results in this survey, since their hardware information is very important for the design of the IN-DEBS.

Reviews of the In-situ Demonstration Test of the Engineered Barrier System in Many Countries

International Nuclear Information System (INIS)

Lee, Minsoo; Choi, Heui Joo

2013-01-01

Many nations considering the deep geologic disposal of HLW are now planning or executing in-situ demonstration experiments on their regional EBS (Engineering barrier system) at their deep underground research facilities. The main purpose of the in-situ EBS test is the experimental confirmation of its performance, and the prediction of its long-term evolution through the modeling of EBS based on the experimental data. Additionally, the engineering feasibility for the construction of an engineering barrier system can also be checked through full scale construction of an in-situ test. KAERI is currently preparing an in-situ test at a large 1/3 scale, called IN-DEBS (In-situ Demonstration of EBS) at KURT (KAERI Underground Research Tunnel) for the generic EBS suggested in A-KRS (Advanced KAERI Reference System), which was developed to treat the HLW from pyroprocessing. As the first step for the design of IN-DEBS, the foreign in-situ demonstrations of EBS were reviewed in this paper. The demonstration projects, which were completed or are still being executed in some countries such as Sweden, France, Finland, Canada, Belgium, Switzerland, Spain, and Japan, were surveyed and summarized. In particular, hardware constitutions such as the heating element or compact bentonite, and the experimental procedures, have focused more on reviews than on experimental results in this survey, since their hardware information is very important for the design of the IN-DEBS

Book Review:Agricultural development in China and Africa: A ...

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 6, No 1 (2014) >. Log in or Register to get access to full text downloads.

Science review of internal combustion engines

International Nuclear Information System (INIS)

Taylor, Alex M.K.P.

2008-01-01

Internal combustion engines used in transportation produce about 23% of the UK's carbon dioxide emission, up from 14% in 1980. The current science described in this paper suggests that there could be 6-15% improvements in internal combustion fuel efficiency in the coming decade, although filters to meet emission legislation reduce these gains. Using these engines as hybrids with electric motors produces a reduction in energy requirements in the order of 21-28%. Developments beyond the next decade are likely to be dominated by four topics: emission legislation and emission control, new fuels, improved combustion and a range of advanced concepts for energy saving. Emission control is important because current methods for limiting nitrogen oxides and particulate emissions imply extra energy consumption. Of the new fuels, non-conventional fossil-derived fuels are associated with larger greenhouse gas emissions than conventional petroleum-based fuels, while a vehicle propelled by fuel cells consuming non-renewable hydrogen does not necessarily offer an improvement in emissions over the best hybrid internal combustion engines. Improved combustion may be developed for both gasoline and diesel fuels and promises better efficiency as well as lower noxious emissions without the need for filtering. Finally, four advanced concepts are considered: new thermodynamic cycles, a Rankine bottoming cycle, electric turbo-compounding and the use of thermoelectric devices. The latter three all have the common theme of trying to extract energy from waste heat, which represents about 30% of the energy input to an internal combustion engine

African Journals Online (AJOL)

African Journals Online (AJOL)

2013). International Journal of Engineering, Science and Technology. Vol 5, No 3 (2013). International Journal of Engineering, Science and Technology. Vol 30, No 1 (2018). South African Journal of Sports Medicine. Vol 66 (2014). Vulture News.

Book Review: Building the Team by Chantal Epie | Ovadje | LBS ...

African Journals Online (AJOL)

LBS Management Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 1 (2004) >. Log in or Register to get access to full text downloads.

Vibro-acoustic condition monitoring of Internal Combustion Engines: A critical review of existing techniques

Science.gov (United States)

Delvecchio, S.; Bonfiglio, P.; Pompoli, F.

2018-01-01

This paper deals with the state-of-the-art strategies and techniques based on vibro-acoustic signals that can monitor and diagnose malfunctions in Internal Combustion Engines (ICEs) under both test bench and vehicle operating conditions. Over recent years, several authors have summarized what is known in critical reviews mainly focused on reciprocating machines in general or on specific signal processing techniques: no attempts to deal with IC engine condition monitoring have been made. This paper first gives a brief summary of the generation of sound and vibration in ICEs in order to place further discussion on fault vibro-acoustic diagnosis in context. An overview of the monitoring and diagnostic techniques described in literature using both vibration and acoustic signals is also provided. Different faulty conditions are described which affect combustion, mechanics and the aerodynamics of ICEs. The importance of measuring acoustic signals, as opposed to vibration signals, is due since the former seem to be more suitable for implementation on on-board monitoring systems in view of their non-intrusive behaviour, capability in simultaneously capturing signatures from several mechanical components and because of the possibility of detecting faults affecting airborne transmission paths. In view of the recent needs of the industry to (-) optimize component structural durability adopting long-life cycles, (-) verify the engine final status at the end of the assembly line and (-) reduce the maintenance costs monitoring the ICE life during vehicle operations, monitoring and diagnosing system requests are continuously growing up. The present review can be considered a useful guideline for test engineers in understanding which types of fault can be diagnosed by using vibro-acoustic signals in sufficient time in both test bench and operating conditions and which transducer and signal processing technique (of which the essential background theory is here reported) could be

Gender and Behaviour - Vol 5, No 2 (2007)

African Journals Online (AJOL)

Gender and Behaviour. ... Gender and Behaviour - Vol 5, No 2 (2007) ... Home Type, Age and Gender on The Antisocial Behaviour of Secondary School Students. ... Gender-Wise Comparison on Emotional Intelligence and Marital Satisfaction.

Afican Health Sciences Vol 10 No 4.pmd

African Journals Online (AJOL)

Administrator

African Health Sciences Vol 10 No 4 December 2010. 353. Effect of ... Key words: Rumex steudelii, Antifertility, Folliculogenesis, Endometrium, uterus, ovary, ovarian follicles, corpus luteum,. Rats. ..... first cycle in intrauterine growth-related and.

Preliminary evaluation of rotational Vol-oxidizer for hot cell operation - 5320

International Nuclear Information System (INIS)

Kim, Y.H.; Lee, J.W.; Cho, Y.Z.; Ahn, D.H.; Song, K.C.

2015-01-01

KAERI is developing a mechanical head-end process for pyro-processing. As a piece of the processing equipment, a vol-oxidizer that can handle several tens of kg of HM/batch is under development to supply U 3 O 8 powders to an electrolytic reduction (ER) reactor. To operate a vol-oxidizer in a hot cell, the reactor should be optimized by the mechanical design, and the vol-oxidizer should have a high hull recovery rate. In addition, a vol-oxidizer for hot cell demonstrations that handles the spent fuel of high radiation virulence in a limited space should have a small size and not scatter in its outlet. In this paper, we aim at a preliminary evaluation of a rotational vol-oxidizer for hot cell operation. To evaluate the preliminary situation, we produced a theoretical equation of an optimum reactor size, and verification tests were conducted using an acryl vessel and zircaloy-4 tube according to various weights and lengths. In addition, we predicted the terminal velocity of U 3 O 8 using the terminal velocity of SiO 2 , which will determine the optimum air flux, and through an oxidation experiment, we verified the theory form to detect the existence of U 3 O 8 powder in a discharge filter. In addition, hull separation tests were conducted using a reactor and hulls with a 50 kg HM/batch for the recovery rate of the hulls. The results indicate that we obtained an appropriate air flux so as to not cause U 3 O 8 powder dispersion from using a Stokes equation and density ratio equation prior to the demonstration. The optimum flow and experimental results of the hull separation test have been applied for the design of the demonstration oxidizer, and the operation conditions of the oxidizer were produced. (authors)

Joyo progress report, vol. 8

International Nuclear Information System (INIS)

1983-01-01

Following Joyo Reactor Technology Progress Reports (Vol. 1 to Vol. 7), the name was changed to Joyo Progress Report from this volume, and the activities concerning the fast breeder experimental reactor Joyo as a whole are to be reported as quarterly report. In the fast breeder experimental reactor Joyo, the change to the core for irradiation (MK-2) from the core for breeding (MK-1) was carried out since January, 1982, in order to utilize the reactor as an irradiation facility for the development of fuel and materials. The main work was the construction of the core for irradiation by exchanging 290 fuel elements, and the exchange of upper and lower guide pipes for control rods, the reconstruction of the driving mechanism, the installation of standby neutron detector system, the acceptance and inspection of new fuel, and the transfer of spent fuel between pools were carried out. As scheduled, the core for irradiation attained the initial criticality on November 22, and the works of constructing the core were completed on December 23, 1982. Thereafter, the 100 MW performance test was begun. Various experience and valuable data were obtained in the regular inspection and the maintenance and repair works carried out at the same time, regarding the operation and maintenance of the Joyo facilities. (Kako, I.)

A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

Science.gov (United States)

Barrias, António; Casas, Joan R.; Villalba, Sergi

2016-01-01

The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures. PMID:27223289

A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications.

Science.gov (United States)

Barrias, António; Casas, Joan R; Villalba, Sergi

2016-05-23

The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures' conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it's an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures.

A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

Directory of Open Access Journals (Sweden)

António Barrias

2016-05-01

Full Text Available The application of structural health monitoring (SHM systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures.

Proceedings of the fifth international symposium on numerical methods in engineering. Vol. 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Gruber, R [Ecole Polytechnique Federale, Lausanne (Switzerland); Periaux, J [Avions Marcel Dassault-Breguet Aviation, 92 - Saint-Cloud (France). Aerodynamique, Methodes Numeriques; Shaw, R P [Buffalo Univ., NY (USA). Dept. of Civil Engineering; eds.

1989-01-01

The present two volumes survey the state of the art in advanced scientific computing as applied to engineering science. Many fields ranging from modelization (partial differential equations, integral equations, boundary conditions, macroscopic models, cellular automata) to numerical methods (finite elements, optimization, software engineering tools, parallel and vector computing methods, domain decomposition, multigrid) and applications (nonlinear solid mechanics, fracture mechanics, composite materials, friction and contact, fluid mechanics, chemical flows, convection, free boundaries, combustion, electromagnetics) are covered by invited papers, minisymposia and contributed papers. (orig./HP).

Accounting engineering for sustainable development

Directory of Open Access Journals (Sweden)

Sidornya A.

2017-01-01

Full Text Available The article deals with the sustainable development of industrial enterprises in Russia, accounting for sustainable industrial growth of the national economy, tools of accounting engineering aimed at creating an information basis of transformation the Russian economic model to knowledge based economy. The proposed mechanism of ownership control of industrial enterprises in the context of long-term planning of the national economy. Theoretical bases of accounting engineering, its tools are defined. A brief review of the literature on the problem of accounting engineering is provided. A practical example of the application of the accounting engineering logic for the industrial enterprise is reviewed. It describes the research results obtained during the last 25 years of Russian scientific school of accounting engineering. Conclusions and recommendations on the use of accounting engineering to sustainable development of the Russian economy are formulated.

Retroesophageal right subclavian artery: a case report and review of ...

African Journals Online (AJOL)

Retroesophageal right subclavian artery: a case report and review of the literature. Anthony Ocaya. Department ... the left subclavian artery, and the left common carotid artery. Adachi first .... Vol 2, New York: Harper & Row. 1968. 13. Tubbs SR ...

Concise Review: Organ Engineering: Design, Technology, and Integration.

Science.gov (United States)

Kaushik, Gaurav; Leijten, Jeroen; Khademhosseini, Ali

2017-01-01

Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling technologies including biocompatible biomaterials and biofabrication platforms such as three-dimensional bioprinting. When engineering complex tissues and organs, core design principles must be taken into account, such as the structure-function relationship, biochemical signaling, mechanics, gradients, and spatial constraints. Technological advances in biomaterials, biofabrication, and biomedical imaging allow for in vitro control of these factors to recreate in vivo phenomena. Finally, organ engineering emerges as an integration of biological design and technical rigor. An overall workflow for organ engineering and guiding technology to advance biology as well as a perspective on necessary future iterations in the field is discussed. Stem Cells 2017;35:51-60. © 2016 AlphaMed Press.

Tanzania Veterinary Journal - Vol 32, No 1 (2017)

African Journals Online (AJOL)

Tanzania Veterinary Journal - Vol 32, No 1 (2017) ... factors for porcine cysticercosis transmission and animal welfare in selected villages in Nyasa, Tanzania ... Thoracic radiographic anatomy in sheep · EMAIL FULL TEXT EMAIL FULL TEXT

Protocol adaptations to conduct Systematic Literature Reviews in Software Engineering: a chronological study

Directory of Open Access Journals (Sweden)

Samuel Sepúlveda

2015-09-01

Full Text Available Systematic literature reviews (SLR have reached a considerable level of adoption in Software Engineering (SE, how-ever protocol adaptations for its implementation remain tangentially addressed. This work provides a chronological framework for the use and adaptation of the SLR protocol, including its current status. A systematic literature search was performed, reviewing a set of twelve articles being selected in accordance with the inclusion and exclusion criteria between 2004 and 2013, using digital data sources recognized by the SE community. A chronological framework is provided that includes the current state of the protocol adaptations to conduct SLR in SE. The results indicate areas where the quantity and quality of investigations needs to be increased and the identi- fication of the main proposals providing adaptations for the protocol conducting SLR in SE.

Volterra-series-based nonlinear system modeling and its engineering applications: A state-of-the-art review

Science.gov (United States)

Cheng, C. M.; Peng, Z. K.; Zhang, W. M.; Meng, G.

2017-03-01

Nonlinear problems have drawn great interest and extensive attention from engineers, physicists and mathematicians and many other scientists because most real systems are inherently nonlinear in nature. To model and analyze nonlinear systems, many mathematical theories and methods have been developed, including Volterra series. In this paper, the basic definition of the Volterra series is recapitulated, together with some frequency domain concepts which are derived from the Volterra series, including the general frequency response function (GFRF), the nonlinear output frequency response function (NOFRF), output frequency response function (OFRF) and associated frequency response function (AFRF). The relationship between the Volterra series and other nonlinear system models and nonlinear problem solving methods are discussed, including the Taylor series, Wiener series, NARMAX model, Hammerstein model, Wiener model, Wiener-Hammerstein model, harmonic balance method, perturbation method and Adomian decomposition. The challenging problems and their state of arts in the series convergence study and the kernel identification study are comprehensively introduced. In addition, a detailed review is then given on the applications of Volterra series in mechanical engineering, aeroelasticity problem, control engineering, electronic and electrical engineering.

NASA System Engineering Design Process

Science.gov (United States)

Roman, Jose

2011-01-01

This slide presentation reviews NASA's use of systems engineering for the complete life cycle of a project. Systems engineering is a methodical, disciplined approach for the design, realization, technical management, operations, and retirement of a system. Each phase of a NASA project is terminated with a Key decision point (KDP), which is supported by major reviews.

A Review on the Regulatory Strategy of Human Factors Engineering Consideration in Pakistan Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Sohail, Sabir [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Choi, Seong Nam [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-10-15

In this paper, the legal and regulatory infrastructure available in Pakistan for HFE requirements is assessed, and the methodology for strengthening of legal infrastructure is presented. The regulatory strategy on evaluation of HFE consideration should provide reviewers with guidance on review process. Therefore, the suggested methodology is based on preparation of guidance documents such as checklist, working procedures, S and Gs etc.; incorporation of PRM elements in regulatory system; and finally the development of PRM implementation criteria. Altogether, the scheme provide the enhancement in regulatory infrastructure and also the effective and efficient review process. The Three Mile Island (TMI) accident brought the general consensus among the nuclear community on the integration of human factors engineering (HFE) principles in all phases of nuclear power. This notion has further strengthened after the recent Fukushima nuclear accident. Much effort has been put over to incorporate the lesson learned and continuous technical evolution on HFE to device different standards. The total of 174 ergonomics standards are alone identified by Dul et al. (2004) published by International Organization for Standardization (ISO) and the European Committee for Standardization (CEN) and number of standards and HFE guidelines (S and Gs) are also published by organizations like Institute for Electrical and Electronics Engineering (IEEE), International Electrotechnical Commission (IEC), International Atomic Energy Agency (IAEA), United States Nuclear Regulatory Commission (USNRC), etc. The ambition of effective review on HFE integration in nuclear facility might be accomplished through the development of methodology for systematic implementation of S and Gs. Such kind of methodology would also be beneficial for strengthening the regulatory framework and practices for countries new in the nuclear arena and with small scale nuclear program. The objective of paper is to review the

Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

Science.gov (United States)

This review focus on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that take advantages of their superparamagnetism and high surface area. MNPs are synthesized via co-pre...

Trends in Environmental Health Engineering

Science.gov (United States)

Rowe, D. R.

1972-01-01

Reviews the trends in environmental health engineering and describes programs in environmental engineering technology and the associated environmental engineering courses at Western Kentucky University (four-year program), Wytheville Community College (two-year program), and Rensselaer Polytechnic Institute (four-year program). (PR)

Multimedia Search Engines : Concept, Performance, and Types

OpenAIRE

Sayed Rabeh Sayed

2005-01-01

A Research about multimedia search engines, it starts with definition of search engines at general and multimedia search engines, then explains how they work, and divided them into: Video search engines, Images search engines, and Audio search engines. Finally, it reviews a samples to multimedia search engines.

A review of metabolic and enzymatic engineering strategies for designing and optimizing performance of microbial cell factories

Directory of Open Access Journals (Sweden)

Amanda K. Fisher

2014-08-01

Full Text Available Microbial cell factories (MCFs are of considerable interest to convert low value renewable substrates to biofuels and high value chemicals. This review highlights the progress of computational models for the rational design of an MCF to produce a target bio-commodity. In particular, the rational design of an MCF involves: (i product selection, (ii de novo biosynthetic pathway identification (i.e., rational, heterologous, or artificial, (iii MCF chassis selection, (iv enzyme engineering of promiscuity to enable the formation of new products, and (v metabolic engineering to ensure optimal use of the pathway by the MCF host. Computational tools such as (i de novo biosynthetic pathway builders, (ii docking, (iii molecular dynamics (MD and steered MD (SMD, and (iv genome-scale metabolic flux modeling all play critical roles in the rational design of an MCF. Genome-scale metabolic flux models are of considerable use to the design process since they can reveal metabolic capabilities of MCF hosts. These can be used for host selection as well as optimizing precursors and cofactors of artificial de novo biosynthetic pathways. In addition, recent advances in genome-scale modeling have enabled the derivation of metabolic engineering strategies, which can be implemented using the genomic tools reviewed here as well.

GLOBAL JOURNAL OF SOCIAL SCIENCES VOL 8, NO

African Journals Online (AJOL)

Ada

GLOBAL JOURNAL OF SOCIAL SCIENCES VOL 8, NO. ... media. From the over fifty tertiary institutions in the country graduates are churned .... few were collected at the contact addresses, ... acquisition is paramount for successful job hunting.

LHCb RICH1 Engineering Design Review Report

CERN Document Server

Brook, N; Metlica, F; Muir, A; Phillips, A; Buckley, A; Gibson, V; Harrison, K; Jones, C R; Katvars, S G; Lazzeroni, C; Storey, J; Ward, CP; Wotton, S; Alemi, M; Arnabaldi, C; Bellunato, T F; Calvi, M; Matteuzzi, C; Musy, M; Negri, P; Perego, D L; Pessina, G; Chamonal, R; Eisenhardt, S; Lawrence, J; McCarron, J; Muheim, F; Playfer, S; Walker, A; Cuneo, S; Fontanelli, F; Gracco, Valerio; Mini, G; Musico, P; Petrolini, A; Sannino, M; Bates, A; MacGregor, A; O'Shea, V; Parkes, C; Paterson, S; Petrie, D; Pickford, A; Rahman, M; Soler, F; Allebone, L; Barber, J H; Cameron, W; Clark, D; Dornan, Peter John; Duane, A; Egede, U; Hallam, R; Howard, A; Plackett, R; Price, D; Savidge, T; Vidal-Sitjes, G; Websdale, D M; Adinolfi, M; Bibby, J H; Cioffi, C; Gligorov, Vladimir V; Harnew, N; Harris, F; McArthur, I A; Newby, C; Ottewell, B; Rademacker, J; Senanayake, R; Somerville, L P; Soroko, A; Smale, N J; Topp-Jørgensen, S; Wilkinson, G; Yang, S; Benayoun, M; Khmelnikov, V A; Obraztsov, V F; Densham, C J; Easo, S; Franek, B; Kuznetsov, G; Loveridge, P W; Morrow, D; Morris, JV; Papanestis, A; Patrick, G N; Woodward, M L; Aglieri-Rinella, G; Albrecht, A; Braem, André; Campbell, M; D'Ambrosio, C; Forty, R W; Frei, C; Gys, Thierry; Jamet, O; Kanaya, N; Losasso, M; Moritz, M; Patel, M; Piedigrossi, D; Snoeys, W; Ullaland, O; Van Lysebetten, A; Wyllie, K

2005-01-01

This document describes the concepts of the engineering design to be adopted for the upstream Ring Imaging Cherenkov detector (RICH1) of the reoptimized LHCb detector. Our aim is to ensure that coherent solutions for the engineering design and integration for all components of RICH1 are available, before proceeding with the detailed design of these components.

Book Review: Globalization and Citizenship | Ngwainmbi | Journal ...

African Journals Online (AJOL)

Journal of Development and Communication Studies. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2-3 (2013) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Book Review: Globalization and ...

Review article: Ethnomusicology and music education: Continuing ...

African Journals Online (AJOL)

This review article further explores the nexus between music education and African music/(ethno)musicology that continues the dialogue between the disciplines of musicology and ethnomusicology initiated by Susan Harrop-Allin in SAMUS vol. 25 109-24). Although there has been an explosion of literature over the last five ...

AFRREV STECH, Vol. 3(1) February, 2014

African Journals Online (AJOL)

Toshiba

Indexed African Journals Online: www.ajol.info. AFRREV STECH. An International Journal of Science and Technology. Bahir Dar, Ethiopia. Vol. 3 (1), S/No 6, February, 2014: 1-11. ISSN 2225-8612 (Print) ISSN 2227-5444 (Online). EFFECTS OF DEFORESTATION ON NATURAL. BIO-DIVERSITY IN DELTA NORTH ...

Professional Training for TRADOC Environmental and Natural Resource Professionals. Volume 1. A Feasibility Study and Concept Plan for a University Without Walls

Science.gov (United States)

1991-05-01

Materials Pest Management Program PCBs Underground Storage Tanks Radioactive and Nuclear Accidents and Incidents Best Management Practices V. SOLID WASTE...technical aspects will be much more generic. 4Oerald A. Rich, "Environental Software Review: 1990," Polution Engineering, Vol XXJL No. 1, pp 90-97. 22 3

ESRS guidelines for software safety reviews. Reference document for the organization and conduct of Engineering Safety Review Services (ESRS) on software important to safety in nuclear power plants

International Nuclear Information System (INIS)

2000-01-01

The IAEA provides safety review services to assist Member States in the application of safety standards and, in particular, to evaluate and facilitate improvements in nuclear power plant safety performance. Complementary to the Operational Safety Review Team (OSART) and the International Regulatory Review Team (IRRT) services are the Engineering Safety Review Services (ESRS), which include reviews of siting, external events and structural safety, design safety, fire safety, ageing management and software safety. Software is of increasing importance to safety in nuclear power plants as the use of computer based equipment and systems, controlled by software, is increasing in new and older plants. Computer based devices are used in both safety related applications (such as process control and monitoring) and safety critical applications (such as reactor protection). Their dependability can only be ensured if a systematic, fully documented and reviewable engineering process is used. The ESRS on software safety are designed to assist a nuclear power plant or a regulatory body of a Member State in the review of documentation relating to the development, application and safety assessment of software embedded in computer based systems important to safety in nuclear power plants. The software safety reviews can be tailored to the specific needs of the requesting organization. Examples of such reviews are: project planning reviews, reviews of specific issues and reviews prior final acceptance. This report gives information on the possible scope of ESRS software safety reviews and guidance on the organization and conduct of the reviews. It is aimed at Member States considering these reviews and IAEA staff and external experts performing the reviews. The ESRS software safety reviews evaluate the degree to which software documents show that the development process and the final product conform to international standards, guidelines and current practices. Recommendations are

Paraffin-based hybrid rocket engines applications: A review and a market perspective

Science.gov (United States)

Mazzetti, Alessandro; Merotto, Laura; Pinarello, Giordano

2016-09-01

Hybrid propulsion technology for aerospace applications has received growing attention in recent years due to its important advantages over competitive solutions. Hybrid rocket engines have a great potential for several aeronautics and aerospace applications because of their safety, reliability, low cost and high performance. As a consequence, this propulsion technology is feasible for a number of innovative missions, including space tourism. On the other hand, hybrid rocket propulsion's main drawback, i.e. the difficulty in reaching high regression rate values using standard fuels, has so far limited the maturity level of this technology. The complex physico-chemical processes involved in hybrid rocket engines combustion are of major importance for engine performance prediction and control. Therefore, further investigation is ongoing in order to achieve a more complete understanding of such phenomena. It is well known that one of the most promising solutions for overcoming hybrid rocket engines performance limits is the use of liquefying fuels. Such fuels can lead to notably increased solid fuel regression rate due to the so-called "entrainment phenomenon". Among liquefying fuels, paraffin-based formulations have great potentials as solid fuels due to their low cost, availability (as they can be derived from industrial waste), low environmental impact and high performance. Despite the vast amount of literature available on this subject, a precise focus on market potential of paraffins for hybrid propulsion aerospace applications is lacking. In this work a review of hybrid rocket engines state of the art was performed, together with a detailed analysis of the possible applications of such a technology. A market study was carried out in order to define the near-future foreseeable development needs for hybrid technology application to the aforementioned missions. Paraffin-based fuels are taken into account as the most promising segment for market development

African Health Sciences - Vol 15, No 4 (2015)

African Journals Online (AJOL)

African Health Sciences. ... African Health Sciences - Vol 15, No 4 (2015) .... H Madubedube, Andre P Kengne, Rajiv T Erasmus, Tahir S Pillay, Tandi E ... on lung function and cardiorespiratory fitness in both cigarette and hookah smokers.

Tissue engineering of ligaments for reconstructive surgery.

Science.gov (United States)

Hogan, MaCalus V; Kawakami, Yohei; Murawski, Christopher D; Fu, Freddie H

2015-05-01

The use of musculoskeletal bioengineering and regenerative medicine applications in orthopaedic surgery has continued to evolve. The aim of this systematic review was to address tissue-engineering strategies for knee ligament reconstruction. A systematic review of PubMed/Medline using the terms "knee AND ligament" AND "tissue engineering" OR "regenerative medicine" was performed. Two authors performed the search, independently assessed the studies for inclusion, and extracted the data for inclusion in the review. Both preclinical and clinical studies were reviewed, and the articles deemed most relevant were included in this article to provide relevant basic science and recent clinical translational knowledge concerning "tissue-engineering" strategies currently used in knee ligament reconstruction. A total of 224 articles were reviewed in our initial PubMed search. Non-English-language studies were excluded. Clinical and preclinical studies were identified, and those with a focus on knee ligament tissue-engineering strategies including stem cell-based therapies, growth factor administration, hybrid biomaterial, and scaffold development, as well as mechanical stimulation modalities, were reviewed. The body of knowledge surrounding tissue-engineering strategies for ligament reconstruction continues to expand. Presently, various tissue-engineering techniques have some potential advantages, including faster recovery, better ligamentization, and possibly, a reduction of recurrence. Preclinical research of these novel therapies continues to provide promising results. There remains a need for well-designed, high-powered comparative clinical studies to serve as a foundation for successful translation into the clinical setting going forward. Level IV, systematic review of Level IV studies. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Teaching Engineering Practices

Science.gov (United States)

Cunningham, Christine M.; Carlsen, William S.

2014-03-01

Engineering is featured prominently in the Next Generation Science Standards (NGSS) and related reform documents, but how its nature and methods are described is problematic. This paper is a systematic review and critique of that representation, and proposes that the disciplinary core ideas of engineering (as described in the NGSS) can be disregarded safely if the practices of engineering are better articulated and modeled through student engagement in engineering projects. A clearer distinction between science and engineering practices is outlined, and prior research is described that suggests that precollege engineering design can strengthen children's understandings about scientific concepts. However, a piecemeal approach to teaching engineering practices is unlikely to result in students understanding engineering as a discipline. The implications for science teacher education are supplemented with lessons learned from a number of engineering education professional development projects.

Thermoacoustic engines and refrigerators

Energy Technology Data Exchange (ETDEWEB)

Swift, G.

1996-12-31

This report is a transcript of a practice lecture given in preparation for a review lecture on the operation of thermoacoustic engines and refrigerators. The author begins by a brief review of the thermodynamic principles underlying the operation of thermoacoustic engines and refrigerators. Remember from thermodynamics class that there are two kinds of heat engines, the heat engine or the prime mover which produces work from heat, and the refrigerator or heat pump that uses work to pump heat. The device operates between two thermal reservoirs at temperatures T{sub hot} and T{sub cold}. In the heat engine, heat flows into the device from the reservoir at T{sub hot}, produces work, and delivers waste heat into the reservoir at T{sub cold}. In the refrigerator, work flows into the device, lifting heat Q{sub cold} from reservoir at T{sub cold} and rejecting waste heat into the reservoir at T{sub hot}.

Tissue Engineering of the Urethra: A Systematic Review and Meta-analysis of Preclinical and Clinical Studies.

Science.gov (United States)

Versteegden, Luuk R M; de Jonge, Paul K J D; IntHout, Joanna; van Kuppevelt, Toin H; Oosterwijk, Egbert; Feitz, Wout F J; de Vries, Rob B M; Daamen, Willeke F

2017-10-01

Urethra repair by tissue engineering has been extensively studied in laboratory animals and patients, but is not routinely used in clinical practice. To systematically investigate preclinical and clinical evidence of the efficacy of tissue engineering for urethra repair in order to stimulate translation of preclinical studies to the clinic. A systematic search strategy was applied in PubMed and EMBASE. Studies were independently screened for relevance by two reviewers, resulting in 80 preclinical and 23 clinical studies of which 63 and 13 were selected for meta-analysis to assess side effects, functionality, and study completion. Analyses for preclinical and clinical studies were performed separately. Full circumferential and inlay procedures were assessed independently. Evaluated parameters included seeding of cells and type of biomaterial. Meta-analysis revealed that cell seeding significantly reduced the probability of encountering side effects in preclinical studies. Remarkably though, cells were only sparsely used in the clinic (4/23 studies) and showed no significant reduction of side effects. ln 21 out of 23 clinical studies, decellularized templates were used, while in preclinical studies other biomaterials showed promising outcomes as well. No direct comparison to current clinical practice could be made due to the limited number of randomized controlled studies. Due to a lack of controlled (pre)clinical studies, the efficacy of tissue engineering for urethra repair could not be determined. Meta-analysis outcome measures were similar to current treatment options described in literature. Surprisingly, it appeared that favorable preclinical results, that is inclusion of cells, were not translated to the clinic. Improved (pre)clinical study designs may enhance clinical translation. We reviewed all available literature on urethral tissue engineering to assess the efficacy in preclinical and clinical studies. We show that improvements to (pre)clinical study

African Health Sciences - Vol 13, No 2 (2013)

African Journals Online (AJOL)

African Health Sciences. ... African Health Sciences - Vol 13, No 2 (2013) ... S Musisi, D Akena, E Nakimuli-Mpungu, C Abbo, J Okello, 205-218 .... Alcohol consumption and cigarette smoking pattern among brothelbased female sex workers in ...

Chlorophyll Extraction from Microalgae: A Review on the Process Engineering Aspects

Directory of Open Access Journals (Sweden)

Aris Hosikian

2010-01-01

Full Text Available Chlorophyll is an essential compound in many everyday products. It is used not only as an additive in pharmaceutical and cosmetic products but also as a natural food colouring agent. Additionally, it has antioxidant and antimutagenic properties. This review discusses the process engineering of chlorophyll extraction from microalgae. Different chlorophyll extraction methods and chlorophyll purification techniques are evaluated. Our preliminary analysis suggests supercritical fluid extraction to be superior to organic solvent extraction. When compared to spectroscopic technique, high performance liquid chromatography was shown to be more accurate and sensitive for chlorophyll analysis. Finally, through CO2 capture and wastewater treatment, microalgae cultivation process was shown to have strong potential for mitigation of environmental impacts.

Precision engineering: an evolutionary perspective.

Science.gov (United States)

Evans, Chris J

2012-08-28

Precision engineering is a relatively new name for a technology with roots going back over a thousand years; those roots span astronomy, metrology, fundamental standards, manufacturing and money-making (literally). Throughout that history, precision engineers have created links across disparate disciplines to generate innovative responses to society's needs and wants. This review combines historical and technological perspectives to illuminate precision engineering's current character and directions. It first provides us a working definition of precision engineering and then reviews the subject's roots. Examples will be given showing the contributions of the technology to society, while simultaneously showing the creative tension between the technological convergence that spurs new directions and the vertical disintegration that optimizes manufacturing economics.

AJESMS Vol 9 2011 October 23 2012 final

African Journals Online (AJOL)

Owner

2011-10-23

Oct 23, 2011 ... African Journal of Educational Studies in Mathematics and Sciences Vol. ... alveolar re-circulation and gravity orientation are key factors in determining the ..... Comp. Biomed. Res. 3, pp 675-689. Pich, J. (1972). Theory of ...

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson, Ludy

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems, available separately as CE 031 217. Focus of the exercises and pretests is inspecting and servicing the fuel and carburetion systems. Pretests and performance checklists are provided for each of the…

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson-Roberts, Ludy; And Others

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the exercises and pretests is testing the battery and cranking system. Pretests and performance checklists are provided for each of the four performance objectives contained in the unit.…

Hepatitis C virus infection: review | Botha | South African ...

African Journals Online (AJOL)

South African Gastroenterology Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 1, No 2 (2003) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

Microbes as interesting source of novel insecticides: A review ...

African Journals Online (AJOL)

... strains with good insecticidal properties can be identified, evaluated and utilized for pest control. This paper reviews the insecticidal properties of microbes and their potential utility in pest management. Keywords: Microbes, insecticides, metabolites, pest management. African Journal of Biotechnology, Vol 13(26) 2582- ...

Bio-based materials with novel characteristics for tissue engineering applications - A review.

Science.gov (United States)

Bedian, Luis; Villalba-Rodríguez, Angel M; Hernández-Vargas, Gustavo; Parra-Saldivar, Roberto; Iqbal, Hafiz M N

2017-05-01

Recently, a wider spectrum of bio-based materials and materials-based novel constructs and systems has been engineered with high interests. The key objective is to help for an enhanced/better quality of life in a secure way by avoiding/limiting various adverse effects of some in practice traditional therapies. In this context, different methodological approaches including in vitro, in vivo, and ex vivo techniques have been exploited, so far. Among them, bio-based therapeutic constructs are of supreme interests for an enhanced and efficient delivery in the current biomedical sector of the modern world. The development of new types of novel, effective and highly reliable materials-based novel constructs for multipurpose applications is essential and a core demand to tackle many human health related diseases. Bio-based materials possess several complementary functionalities, e.g. unique chemical structure, bioactivity, non-toxicity, biocompatibility, biodegradability, recyclability, etc. that position them well in the modern world's materials sector. In this context, the utilization of biomaterials provides extensive opportunities for experimentation in the field of interdisciplinary and multidisciplinary scientific research. With an aim to address the global dependence on petroleum-based polymers, researchers have been redirecting their interests to the engineering of biological materials for targeted applications in different industries including cosmetics, pharmaceuticals, and other biotechnological or biomedical applications. Herein, we reviewed biotechnological advancements at large and tissue engineering from a biomaterials perspective in particular and envision directions of future developments. Copyright © 2017 Elsevier B.V. All rights reserved.

The application of biomedical engineering techniques to the diagnosis and management of tropical diseases: a review.

Science.gov (United States)

Ibrahim, Fatimah; Thio, Tzer Hwai Gilbert; Faisal, Tarig; Neuman, Michael

2015-03-23

This paper reviews a number of biomedical engineering approaches to help aid in the detection and treatment of tropical diseases such as dengue, malaria, cholera, schistosomiasis, lymphatic filariasis, ebola, leprosy, leishmaniasis, and American trypanosomiasis (Chagas). Many different forms of non-invasive approaches such as ultrasound, echocardiography and electrocardiography, bioelectrical impedance, optical detection, simplified and rapid serological tests such as lab-on-chip and micro-/nano-fluidic platforms and medical support systems such as artificial intelligence clinical support systems are discussed. The paper also reviewed the novel clinical diagnosis and management systems using artificial intelligence and bioelectrical impedance techniques for dengue clinical applications.

Afican Health Sciences Vol 9 No 2.pmd

African Journals Online (AJOL)

Administrator

African Health Sciences Vol 9 No 2 June 2009 ... Background:The under five mortality rate (U5MR) is measure of wellbeing and decreasing the U5MR by two .... under three scenarios 1-3. ... Negative indicates increase in childhood mortalities.

Concise Review: Organ Engineering: Design, Technology, and Integration

NARCIS (Netherlands)

Kaushik, G.; Leijten, Jeroen Christianus Hermanus; Khademhosseini, A.

Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling

Advanced rotary engine studies

Science.gov (United States)

Jones, C.

1980-01-01

A review of rotary engine developments relevant to a stratified charge rotary aircraft engine is presented. Advantages in module size and weight, fuel efficiency, reliability, and multi-fuel capability are discussed along with developments in turbocharging, increased mean effective pressure, improved apex seal/trochoid wear surfacing materials, and high strength and temperature aluminum casting alloys. A carbureted prototype aircraft engine is also described.

A review of the genus Erycibe Roxb

NARCIS (Netherlands)

Hoogland, R.D.

1953-01-01

In this paper I intend to give a review of the genus Erycibe Roxb. in. which all the names published in the genus will be accounted for. The representatives from Malaysia have been dealt with more extensively in the revision of the genus in Flora Malesiana, Ser. I, Vol. 4, 4th instalment, 1953, pp.

Science and engineering of nanodiamond particle surfaces for biological applications (Review).

Science.gov (United States)

Shenderova, Olga A; McGuire, Gary E

2015-09-05

Diamond has outstanding bulk properties such as super hardness, chemical inertness, biocompatibility, luminescence, to name just a few. In the nanoworld, in order to exploit these outstanding bulk properties, the surfaces of nanodiamond (ND) particles must be accordingly engineered for specific applications. Modification of functional groups on the ND's surface and the corresponding electrostatic properties determine their colloidal stability in solvents, formation of photonic crystals, controlled adsorption and release of cargo molecules, conjugation with biomolecules and polymers, and cellular uptake. The optical activity of the luminescent color centers in NDs depends on their proximity to the ND's surface and surface termination. In order to engineer the ND surface, a fundamental understanding of the specific structural features and sp(3)-sp(2) phase transformations on the surface of ND particles is required. In the case of ND particles produced by detonation of carbon containing explosives (detonation ND), it should also be taken into account that its structure depends on the synthesis parameters and subsequent processing. Thus, for development of a strategy of surface modification of detonation ND, it is imperative to know details of its production. In this review, the authors discuss ND particles structure, strategies for surface modification, electrokinetic properties of NDs in suspensions, and conclude with a brief overview of the relevant bioapplications.

Engineering America's Future in Space: Systems Engineering Innovations for Sustainable Exploration

Science.gov (United States)

Dumbacher, Daniel L.; Caruso, Pamela W.; Jones, Carl P.

2008-01-01

This viewgraph presentation reviews systems engineering innovations for Ares I and Ares V launch vehicles. The contents include: 1) NASA's Exploratoin Roadmap; 2) Launch Vehicle Comparisons; 3) Designing the Ares I and Ares V in House; 4) Exploring the Moon; and 5) Systems Engineering Adds Value Throughout the Project Lifecycle.

Teaching Engineering Practices

Science.gov (United States)

Cunningham, Christine M.; Carlsen, William S.

2014-01-01

Engineering is featured prominently in the Next Generation Science Standards (NGSS) and related reform documents, but how its nature and methods are described is problematic. This paper is a systematic review and critique of that representation, and proposes that the disciplinary core ideas of engineering (as described in the NGSS) can be…

Retraining the Modern Civil Engineer.

Science.gov (United States)

Priscoli, Jerome Delli

1983-01-01

Discusses why modern engineering requires social science and the nature of planning. After these conceptional discussions, 12 practical tools which social science brings to engineering are reviewed. A tested approach to training engineers in these tools is then described. Tools include institutional analysis, policy profiling, and other impact…

Engineering Capabilities and Partnerships

Science.gov (United States)

Poulos, Steve

2010-01-01

This slide presentation reviews the engineering capabilities at Johnson Space Center, The presentation also reviews the partnerships that have resulted in successfully designed and developed projects that involved commercial and educational institutions.

Emissions Characteristics of Small Diesel Engine Fuelled by Waste Cooking Oil

Directory of Open Access Journals (Sweden)

Khalid Amir

2014-07-01

Full Text Available Biodiesel is an alternative, decomposable and biological-processed fuel that has similar characteristics with mineral diesel which can be used directly into diesel engines. However, biodiesel has oxygenated, more density and viscosity compared to mineral diesel. Despite years of improvement attempts, the key issue in using waste cooking oil-based fuels is oxidation stability, stoichiometric point, bio-fuel composition, antioxidants on the degradation and much oxygen with comparing to diesel gas oil. Thus, the improvement of emission exhausted from diesel engines fueled by biodiesel derived from waste cooking oil (WCO is urgently required to meet the future stringent emission regulations. The purpose of this research is to investigate the influences of WCO blended fuel and combustion reliability in small engine on the combustion characteristics and exhaust emissions. The engine speed was varied from 1500-2500 rpm and WCO blending ratio from 5-15 vol% (W5-W15. Increased blends of WCO ratio is found to influences to the combustion process, resulting in decreased the HC emissions and also other exhaust emission element. The improvement of combustion process is expected to be strongly influenced by oxygenated fuel in biodiesel content.

African Sociological Review / Revue Africaine de Sociologie - Vol 7 ...

African Journals Online (AJOL)

? EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT ... Book Review: Louise Meintjes. South of Africa Making Music Zulu in a South African Studio. Durham. Duke University Press. 2003. Michael Drewett.

Alzheimer's disease – A review | Aghaji | International Journal of ...

African Journals Online (AJOL)

It is accompanied by progressive functional deterioration, loss of independence, and numerous cognitive symptoms and behavioral problems. The number of patients with AD is expected to increase in the coming ... Chronic neurodegenerative disorder; Review Journal of College of Medicine Vol. 12 (1) 2007: pp.39-44 ...

African Journal of Biotechnology - Vol 8, No 25 (2009)

African Journals Online (AJOL)

An overview of the potentials of natural rubber (Hevea brasiliensis) engineering for the production of valuable proteins · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD ... A review of the use of prebiotic in aquaculture for fish and shrimp · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD ...

Stress concept in transportation of live fishes – a review | Omeji ...

African Journals Online (AJOL)

Journal Home > Vol 9, No 2 (2017) > ... This paper review covers work done on various methods of transporting live fishes, factors to consider for fish transportation, the stress concept and how stress can be minimized during fish transportation ...

Journal of Applied Sciences and Environmental Management - Vol ...

African Journals Online (AJOL)

Journal of Applied Sciences and Environmental Management. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... Journal of Applied Sciences and Environmental Management - Vol 22, No 5 (2018) .... Growth Performance of Five Bean (Phaseolus spp) Varieties as Influenced by Organic ...

Modular co-culture engineering, a new approach for metabolic engineering.

Science.gov (United States)

Zhang, Haoran; Wang, Xiaonan

2016-09-01

With the development of metabolic engineering, employment of a selected microbial host for accommodation of a designed biosynthetic pathway to produce a target compound has achieved tremendous success in the past several decades. Yet, increasing requirements for sophisticated microbial biosynthesis call for establishment and application of more advanced metabolic engineering methodologies. Recently, important progress has been made towards employing more than one engineered microbial strains to constitute synthetic co-cultures and modularizing the biosynthetic labor between the co-culture members in order to improve bioproduction performance. This emerging approach, referred to as modular co-culture engineering in this review, presents a valuable opportunity for expanding the scope of the broad field of metabolic engineering. We highlight representative research accomplishments using this approach, especially those utilizing metabolic engineering tools for microbial co-culture manipulation. Key benefits and major challenges associated with modular co-culture engineering are also presented and discussed. Copyright © 2016 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Loss terms in free-piston Stirling engine models

Science.gov (United States)

Gordon, Lloyd B.

1992-01-01

Various models for free piston Stirling engines are reviewed. Initial models were developed primarily for design purposes and to predict operating parameters, especially efficiency. More recently, however, such models have been used to predict engine stability. Free piston Stirling engines have no kinematic constraints and stability may not only be sensitive to the load, but also to various nonlinear loss and spring constraints. The present understanding is reviewed of various loss mechanisms for free piston Stirling engines and how they have been incorporated into engine models is discussed.

South African Gastroenterology Review - Vol 2, No 1 (2004)

African Journals Online (AJOL)

The South African Gastroenterology Review. Message from Prof J.E.J. Krige: SAGES President: from the president · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. JEJ Krige, 2-2 ...

Engineering Complex Tissues

Science.gov (United States)

MIKOS, ANTONIOS G.; HERRING, SUSAN W.; OCHAREON, PANNEE; ELISSEEFF, JENNIFER; LU, HELEN H.; KANDEL, RITA; SCHOEN, FREDERICK J.; TONER, MEHMET; MOONEY, DAVID; ATALA, ANTHONY; VAN DYKE, MARK E.; KAPLAN, DAVID; VUNJAK-NOVAKOVIC, GORDANA

2010-01-01

This article summarizes the views expressed at the third session of the workshop “Tissue Engineering—The Next Generation,” which was devoted to the engineering of complex tissue structures. Antonios Mikos described the engineering of complex oral and craniofacial tissues as a “guided interplay” between biomaterial scaffolds, growth factors, and local cell populations toward the restoration of the original architecture and function of complex tissues. Susan Herring, reviewing osteogenesis and vasculogenesis, explained that the vascular arrangement precedes and dictates the architecture of the new bone, and proposed that engineering of osseous tissues might benefit from preconstruction of an appropriate vasculature. Jennifer Elisseeff explored the formation of complex tissue structures based on the example of stratified cartilage engineered using stem cells and hydrogels. Helen Lu discussed engineering of tissue interfaces, a problem critical for biological fixation of tendons and ligaments, and the development of a new generation of fixation devices. Rita Kandel discussed the challenges related to the re-creation of the cartilage-bone interface, in the context of tissue engineered joint repair. Frederick Schoen emphasized, in the context of heart valve engineering, the need for including the requirements derived from “adult biology” of tissue remodeling and establishing reliable early predictors of success or failure of tissue engineered implants. Mehmet Toner presented a review of biopreservation techniques and stressed that a new breakthrough in this field may be necessary to meet all the needs of tissue engineering. David Mooney described systems providing temporal and spatial regulation of growth factor availability, which may find utility in virtually all tissue engineering and regeneration applications, including directed in vitro and in vivo vascularization of tissues. Anthony Atala offered a clinician’s perspective for functional tissue

Clinical code set engineering for reusing EHR data for research: A review.

Science.gov (United States)

Williams, Richard; Kontopantelis, Evangelos; Buchan, Iain; Peek, Niels

2017-06-01

The construction of reliable, reusable clinical code sets is essential when re-using Electronic Health Record (EHR) data for research. Yet code set definitions are rarely transparent and their sharing is almost non-existent. There is a lack of methodological standards for the management (construction, sharing, revision and reuse) of clinical code sets which needs to be addressed to ensure the reliability and credibility of studies which use code sets. To review methodological literature on the management of sets of clinical codes used in research on clinical databases and to provide a list of best practice recommendations for future studies and software tools. We performed an exhaustive search for methodological papers about clinical code set engineering for re-using EHR data in research. This was supplemented with papers identified by snowball sampling. In addition, a list of e-phenotyping systems was constructed by merging references from several systematic reviews on this topic, and the processes adopted by those systems for code set management was reviewed. Thirty methodological papers were reviewed. Common approaches included: creating an initial list of synonyms for the condition of interest (n=20); making use of the hierarchical nature of coding terminologies during searching (n=23); reviewing sets with clinician input (n=20); and reusing and updating an existing code set (n=20). Several open source software tools (n=3) were discovered. There is a need for software tools that enable users to easily and quickly create, revise, extend, review and share code sets and we provide a list of recommendations for their design and implementation. Research re-using EHR data could be improved through the further development, more widespread use and routine reporting of the methods by which clinical codes were selected. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Effects of Pilot Injection Timing and EGR on Combustion, Performance and Exhaust Emissions in a Common Rail Diesel Engine Fueled with a Canola Oil Biodiesel-Diesel Blend

Directory of Open Access Journals (Sweden)

Jun Cong Ge

2015-07-01

Full Text Available Biodiesel as a clean energy source could reduce environmental pollution compared to fossil fuel, so it is becoming increasingly important. In this study, we investigated the effects of different pilot injection timings from before top dead center (BTDC and exhaust gas recirculation (EGR on combustion, engine performance, and exhaust emission characteristics in a common rail diesel engine fueled with canola oil biodiesel-diesel (BD blend. The pilot injection timing and EGR rate were changed at an engine speed of 2000 rpm fueled with BD20 (20 vol % canola oil and 80 vol % diesel fuel blend. As the injection timing advanced, the combustion pressure, brake specific fuel consumption (BSFC, and peak combustion pressure (Pmax changed slightly. Carbon monoxide (CO and particulate matter (PM emissions clearly decreased at BTDC 20° compared with BTDC 5°, but nitrogen oxide (NOx emissions increased slightly. With an increasing EGR rate, the combustion pressure and indicated mean effective pressure (IMEP decreased slightly at BTDC 20° compared to other injection timings. However, the Pmax showed a remarkable decrease. The BSFC and PM emissions increased slightly, but the NOx emission decreased considerably.

AJESMS_ Vol 8 2010 August 15 2011

African Journals Online (AJOL)

Prof. Mereku

2010-08-15

Aug 15, 2010 ... African Journal of Educational Studies in Mathematics and Sciences Vol. ... girls from two Senior High Schools in Accra, the capital of Ghana in West Africa. .... On the face of it, the Brazilian and Swedish children might seem to have the ... The two profile dimensions that have been specified for teaching, ...

Recent Advances in Genetic Engineering - A Review

OpenAIRE

Sobiah Rauf; Zubair Anwar; Hussain Mustatab Wahedi; Jabar Zaman Khan Khattak; Talal Jamil

2012-01-01

Humans have been doing genetic engineering, a technology which is transforming our world, for thousands of years on a wide range of plants, animals and micro organism and have applications in the field of medicine, research, industry and agriculture. The rapid developments in the field of genetic engineering have given a new impetus to biotechnology. This introduces the possibility of tailoring organisms in order to optimize the production of established or novel metabolites of commercial imp...

Wind tunnel evaluation of Hi-Vol TSP effectiveness data

Data.gov (United States)

U.S. Environmental Protection Agency — Wind tunnel evaluation of EPA's Hi-Vol TSP sampler for sampling effectiveness with regards to aerodynamic particle diameter (5 to 35 microns), wind speed (2, 8, 24...

Proceedings of the international conference on medical physics and biomedical engineering. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Spyrou, S; Christofides, S; Pattichis, C S; Keravnou, E; Schizas, C N; Christodoulides, G [eds.

1994-12-31

This is the first of two volumes of the proceedings of the International Conference on Medical Physics and Biomedical Engineering, held in Nicosia, Cyprus, between 3-7 May, 1994. It contains 47 papers. Nine of these fall within the scope of INIS and are dealing with stereolithography, computer tomography, scintigraphy, positron emission tomography, medical imaging, non linear spectral estimation techniques, image compression techniques and x-ray phosphor screens.

Proceedings of the international conference on medical physics and biomedical engineering. Vol. 1

International Nuclear Information System (INIS)

Spyrou, S.; Christofides, S.; Pattichis, C.S.; Keravnou, E.; Schizas, C.N.; Christodoulides, G.

1994-01-01

This is the first of two volumes of the proceedings of the International Conference on Medical Physics and Biomedical Engineering, held in Nicosia, Cyprus, between 3-7 May, 1994. It contains 47 papers. Nine of these fall within the scope of INIS and are dealing with stereolithography, computer tomography, scintigraphy, positron emission tomography, medical imaging, non linear spectral estimation techniques, image compression techniques and x-ray phosphor screens

L'idée de `science sociales' | Mbembe | African Sociological Review ...

African Journals Online (AJOL)

African Sociological Review / Revue Africaine de Sociologie. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 2 (1999) >. Log in or Register to get access to full text downloads.

World Congress on Engineering 2015

CERN Document Server

Yang, Gi-Chul; Gelman, Len

2016-01-01

This volume presents selected peer-reviewed, revised and extended research articles written by prominent researchers who participated in the World Congress on Engineering 2015, held in London, UK, 1-3 July, 2015. This large international conference covered advances in engineering technologies and the physical sciences, with contributions on subjects including mechanical engineering, bioengineering, internet engineering, image engineering, wireless networks, knowledge engineering, manufacturing engineering, and industrial applications. This book offers a snapshot of the state-of-the-art, highlighting tremendous advances in engineering technologies and physical sciences and their applications, and will serve as an excellent reference for researchers and graduate students working in many different disciplines of physical sciences and engineering.

Electronics engineer's reference book

CERN Document Server

Turner, L W

1976-01-01

Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

Image restoration for civil engineering structure monitoring using imaging system embedded on UAV

Science.gov (United States)

Vozel, Benoit; Dumoulin, Jean; Chehdi, Kacem

2013-04-01

Nowadays, civil engineering structures are periodically surveyed by qualified technicians (i.e. alpinist) operating visual inspection using heavy mechanical pods. This method is far to be safe, not only for civil engineering structures monitoring staff, but also for users. Due to the unceasing traffic increase, making diversions or closing lanes on bridge becomes more and more difficult. New inspection methods have to be found. One of the most promising technique is to develop inspection method using images acquired by a dedicated monitoring system operating around the civil engineering structures, without disturbing the traffic. In that context, the use of images acquired with an UAV, which fly around the structures is of particular interest. The UAV can be equipped with different vision system (digital camera, infrared sensor, video, etc.). Nonetheless, detection of small distresses on images (like cracks of 1 mm or less) depends on image quality, which is sensitive to internal parameters of the UAV (vibration modes, video exposure times, etc.) and to external parameters (turbulence, bad illumination of the scene, etc.). Though progresses were made at UAV level and at sensor level (i.e. optics), image deterioration is still an open problem. These deteriorations are mainly represented by motion blur that can be coupled with out-of-focus blur and observation noise on acquired images. In practice, deteriorations are unknown if no a priori information is available or dedicated additional instrumentation is set-up at UAV level. Image restoration processing is therefore required. This is a difficult problem [1-3] which has been intensively studied over last decades [4-12]. Image restoration can be addressed by following a blind approach or a myopic one. In both cases, it includes two processing steps that can be implemented in sequential or alternate mode. The first step carries out the identification of the blur impulse response and the second one makes use of this

Separation review program for reactor protection system and engineered safeguard systems in a nuclear power plant

International Nuclear Information System (INIS)

Lamb, F.J.; Walrod, B.E.

1980-01-01

This review program is utilized during the design of a nuclear power plant to insure separation between interdiscipline design for the Reactor Protection System (RPS) and Engineered Safeguard Systems (ESS). Color coded transparent drawings of the RPS and ESS are produced by each discipline. The separation is then reviewed by overlaying drawings of different disciplines on a light table. When this inspection shows that RPS or ESS elements have less than the established minimum separation, an analysis is performed to determine what, if any, design revision is necessary to insure proper separation. ''Hazard'' drawings are also made for determination of each type of potential hazard in each area of the plant. The review is a continuing process as the design progresses and is revised by any discipline. 5 refs

Cell microenvironment engineering and monitoring for tissue engineering and regenerative medicine: the recent advances.

Science.gov (United States)

Barthes, Julien; Özçelik, Hayriye; Hindié, Mathilde; Ndreu-Halili, Albana; Hasan, Anwarul; Vrana, Nihal Engin

2014-01-01

In tissue engineering and regenerative medicine, the conditions in the immediate vicinity of the cells have a direct effect on cells' behaviour and subsequently on clinical outcomes. Physical, chemical, and biological control of cell microenvironment are of crucial importance for the ability to direct and control cell behaviour in 3-dimensional tissue engineering scaffolds spatially and temporally. In this review, we will focus on the different aspects of cell microenvironment such as surface micro-, nanotopography, extracellular matrix composition and distribution, controlled release of soluble factors, and mechanical stress/strain conditions and how these aspects and their interactions can be used to achieve a higher degree of control over cellular activities. The effect of these parameters on the cellular behaviour within tissue engineering context is discussed and how these parameters are used to develop engineered tissues is elaborated. Also, recent techniques developed for the monitoring of the cell microenvironment in vitro and in vivo are reviewed, together with recent tissue engineering applications where the control of cell microenvironment has been exploited. Cell microenvironment engineering and monitoring are crucial parts of tissue engineering efforts and systems which utilize different components of the cell microenvironment simultaneously can provide more functional engineered tissues in the near future.

Cell Microenvironment Engineering and Monitoring for Tissue Engineering and Regenerative Medicine: The Recent Advances

Directory of Open Access Journals (Sweden)

Julien Barthes

2014-01-01

Full Text Available In tissue engineering and regenerative medicine, the conditions in the immediate vicinity of the cells have a direct effect on cells’ behaviour and subsequently on clinical outcomes. Physical, chemical, and biological control of cell microenvironment are of crucial importance for the ability to direct and control cell behaviour in 3-dimensional tissue engineering scaffolds spatially and temporally. In this review, we will focus on the different aspects of cell microenvironment such as surface micro-, nanotopography, extracellular matrix composition and distribution, controlled release of soluble factors, and mechanical stress/strain conditions and how these aspects and their interactions can be used to achieve a higher degree of control over cellular activities. The effect of these parameters on the cellular behaviour within tissue engineering context is discussed and how these parameters are used to develop engineered tissues is elaborated. Also, recent techniques developed for the monitoring of the cell microenvironment in vitro and in vivo are reviewed, together with recent tissue engineering applications where the control of cell microenvironment has been exploited. Cell microenvironment engineering and monitoring are crucial parts of tissue engineering efforts and systems which utilize different components of the cell microenvironment simultaneously can provide more functional engineered tissues in the near future.

Dictionary of modern engineering. Vol. 1 and Vol. 2. Woerterbuch der modernen Technik. Bd. 1 und Bd. 2. Bd. 1: Englisch - Deutsch. Bd. 2: Deutsch - Englisch

Energy Technology Data Exchange (ETDEWEB)

Oppermann, A

1982-01-01

This work represents the most recent status of modern developments and indicates the complexity of man's technical future. The Dictionary of Modern Engineering contains more than 450,000 terms with over 1 million translation possibilities for the fields of aviation (civilian and military), space travel, navigation, engine, turbine and rocket construction, aerodynamics, statics, atomic physics, electronics, data processing, cybernetics, machine and tool construction, mineral oils, artificial materials, plasma, lasers, as well as all related fields. In addition, expressions in the field of air travel and its related subjects, newly developed under the auspices of BVM and ICAO, were included.

Journal of Applied Sciences and Environmental Management - Vol ...

African Journals Online (AJOL)

Journal of Applied Sciences and Environmental Management. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... Journal of Applied Sciences and Environmental Management - Vol 22, No 4 (2018) ... Evaluating the effect of mobility speed on the performance of three handover algorithms in ...

Shostakovich: The Orchestral Songs Vol. 2 / Michael Tanner

Index Scriptorium Estoniae

Tanner, Michael

1996-01-01

Uuest heliplaadist "Shostakovich: The Orchestral Songs Vol. 2: Six Romances on texts by Japanese poets, Op. 21. Six Poems on Marina Tsvetayeva, Op. 143. Suite on Verses of Michelangelo, Op. 145. Gothenburg Symphony Orchestra, Neeme Järvi". DG 447 085-2GH (71 minutes:DDD)

Wind engineering in Africa

NARCIS (Netherlands)

Wisse, J.A.; Stigter, C.J.

2007-01-01

The International Association for Wind Engineering (IAWE) has very few contacts in Africa, the second-largest continent. This paper reviews important wind-related African issues. They all require data on wind climate, which are very sparse in Africa. Wind engineering in Africa can assist in

GPR Technologies and Methodologies in Italy: A Review

Science.gov (United States)

Benedetto, Andrea; Frezza, Fabrizio; Manacorda, Guido; Massa, Andrea; Pajewski, Lara

2014-05-01

GPR techniques and technologies have been subject of intense research activities at the Italian level in the last 15 years because of their potential applications specifically to civil engineering. More in detail, several innovative approaches and models have been developed to inspect road pavements to measure the thickness of their layers as well as to diagnose or prevent damage. Moreover, new frontiers in bridge inspection as well as in geotechnical applications such as slides and flows have been investigated using GPR. From the methodological viewpoint, innovative techniques have been developed to solve GPR forward-scattering problems, as well to locate and classify subsurface targets in real-time and to retrieve their properties through multi-resolution strategies, and linear and non-linear methodologies. Furthermore, the application of GPR and other non-destructive testing methods in archaeological prospecting, cultural heritage diagnostics, and in the localization and detection of vital signs of trapped people has been widely investigated. More recently, new theoretical and empirical paradigms regarding water moisture evaluation in various porous media and soil characterization have been published as the results of long terms research activities. Pioneer studies are also currently under development with the scope to correlate GPR measurement with mechanical characteristics of bound and unbound construction materials. In such a framework, this abstract will be aimed at reviewing some of the most recent advances of GPR techniques and technologies within the Italian industrial and academic communities [also including their application within international projects such as FP7 ISTIMES (http://www.istimes.eu)], and at envisaging some of the most promising research trends currently under development. Acknowledgment - This work was supported by COST Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' References [1] M. Balsi, S. Esposito, F

Biomolecular engineering for nanobio/bionanotechnology

Science.gov (United States)

Nagamune, Teruyuki

2017-04-01

Biomolecular engineering can be used to purposefully manipulate biomolecules, such as peptides, proteins, nucleic acids and lipids, within the framework of the relations among their structures, functions and properties, as well as their applicability to such areas as developing novel biomaterials, biosensing, bioimaging, and clinical diagnostics and therapeutics. Nanotechnology can also be used to design and tune the sizes, shapes, properties and functionality of nanomaterials. As such, there are considerable overlaps between nanotechnology and biomolecular engineering, in that both are concerned with the structure and behavior of materials on the nanometer scale or smaller. Therefore, in combination with nanotechnology, biomolecular engineering is expected to open up new fields of nanobio/bionanotechnology and to contribute to the development of novel nanobiomaterials, nanobiodevices and nanobiosystems. This review highlights recent studies using engineered biological molecules (e.g., oligonucleotides, peptides, proteins, enzymes, polysaccharides, lipids, biological cofactors and ligands) combined with functional nanomaterials in nanobio/bionanotechnology applications, including therapeutics, diagnostics, biosensing, bioanalysis and biocatalysts. Furthermore, this review focuses on five areas of recent advances in biomolecular engineering: (a) nucleic acid engineering, (b) gene engineering, (c) protein engineering, (d) chemical and enzymatic conjugation technologies, and (e) linker engineering. Precisely engineered nanobiomaterials, nanobiodevices and nanobiosystems are anticipated to emerge as next-generation platforms for bioelectronics, biosensors, biocatalysts, molecular imaging modalities, biological actuators, and biomedical applications.

African Journal of Biotechnology - Vol 14, No 18 (2015)

African Journals Online (AJOL)

African Journal of Biotechnology - Vol 14, No 18 (2015). Journal Home ... Isolation of microalgae species from arid environments and evaluation of their potentials for biodiesel production · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Jolivet: Complete Flute Music, Vol. 2 / Guy S. Rickards

Index Scriptorium Estoniae

Rickards, Guy S.

1996-01-01

Uuest heliplaadist "Jolivet: Complete Flute Music, Vol. 2. Kroumata Percussion Ensemble, Tapiola Sinfonietta, Paavo Järvi". BIS CD 739 (64 minutes: DDD). Item marked from CD630 (6/94), CD272, remainder new to UK

The Application of Biomedical Engineering Techniques to the Diagnosis and Management of Tropical Diseases: A Review

Directory of Open Access Journals (Sweden)

Fatimah Ibrahim

2015-03-01

Full Text Available This paper reviews a number of biomedical engineering approaches to help aid in the detection and treatment of tropical diseases such as dengue, malaria, cholera, schistosomiasis, lymphatic filariasis, ebola, leprosy, leishmaniasis, and American trypanosomiasis (Chagas. Many different forms of non-invasive approaches such as ultrasound, echocardiography and electrocardiography, bioelectrical impedance, optical detection, simplified and rapid serological tests such as lab-on-chip and micro-/nano-fluidic platforms and medical support systems such as artificial intelligence clinical support systems are discussed. The paper also reviewed the novel clinical diagnosis and management systems using artificial intelligence and bioelectrical impedance techniques for dengue clinical applications.

African Journal of Clinical and Experimental Microbiology - Vol 5, No ...

African Journals Online (AJOL)

African Journal of Clinical and Experimental Microbiology - Vol 5, No 1 (2004) ... ASYMPTOMATIC SIGNIFICANT BACTERIURIA AMONG PREGNANT WOMEN IN ... TO PARASITISM AND THE IMPLICATION ON TREATMENT APPROACH ...

Peer review, basic research, and engineering: Defining a role for QA professionals in basic research environments

Energy Technology Data Exchange (ETDEWEB)

Bodnarczuk, M.

1989-02-01

Within the context of doing basic research, this paper seeks to answer four major questions: (1) What is the authority structure of science. (2) What is peer review. (3) Where is the interface between basic physics research and standard engineering. and (4) Given the conclusions to the first three questions, what is the role of the QA professional in a basic research environment like Fermilab. 23 refs.

Perception and acceptance of technological risks. Vol. 3

Energy Technology Data Exchange (ETDEWEB)

Renn, O

1981-01-01

Vol. 3 discusses the problem of attitudes towards nuclear power. Data are compiled for five communities in North-Rhine Westphalia with nuclear facilities and the control community of Kerpen, which has no nuclear power plant. At the same time, the empirical and theoretical investigations are comprehensively evaluated.

Protein engineering for metabolic engineering: current and next-generation tools

Science.gov (United States)

Marcheschi, Ryan J.; Gronenberg, Luisa S.; Liao, James C.

2014-01-01

Protein engineering in the context of metabolic engineering is increasingly important to the field of industrial biotechnology. As the demand for biologically-produced food, fuels, chemicals, food additives, and pharmaceuticals continues to grow, the ability to design and modify proteins to accomplish new functions will be required to meet the high productivity demands for the metabolism of engineered organisms. This article reviews advances of selecting, modeling, and engineering proteins to improve or alter their activity. Some of the methods have only recently been developed for general use and are just beginning to find greater application in the metabolic engineering community. We also discuss methods of generating random and targeted diversity in proteins to generate mutant libraries for analysis. Recent uses of these techniques to alter cofactor use, produce non-natural amino acids, alcohols, and carboxylic acids, and alter organism phenotypes are presented and discussed as examples of the successful engineering of proteins for metabolic engineering purposes. PMID:23589443

Southern African Journal of Environmental Education - Vol 8 (1988)

African Journals Online (AJOL)

Southern African Journal of Environmental Education - Vol 8 (1988) ... An interaction of archaeology with school history in a museum education context ... The child in the outdoor classroom · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Research in Hospitality Management - Vol 5, No 2 (2015)

African Journals Online (AJOL)

Research in Hospitality Management - Vol 5, No 2 (2015) ... Hotel quality in the European Capital of Culture: Leeuwarden 2018 · EMAIL FREE FULL ... Consumer patronage and willingness-to-pay at different levels of restaurant attributes: A ...

Development on the High-throughput Vol-oxidizer for Decladding and Voloxidation of Spent Fuel Rod-cuts

International Nuclear Information System (INIS)

Kim, Young Hwang; Jung, Jae Hoo; Kim, Ki Ho; Park, Byung Buk; Lee, Hyo Jik; Kim, Sung Hyun; Park, Hee Sung; Lee, Jong Kwang; Kim, Ho Dong

2009-12-01

A high-throughput vol-oxidizer which can handle a several ten kg HM/batch is being developed to supply U 3 O 8 powders to an electrolytic reduction reactor in pyro-processing. At the first year step(2007), for enhancement of oxidation and recovery rate, we analyzed the mechanical and chemical methods, and devised the main mechanism with ball drop methods and rotary kiln type. Also, the main devices for oxidation and recovery of rod-cuts were designed by using the Solid Works and COSMOS program tools, and manufactured after thermal/mechanical analysis. In order to verify the main devices, simulation fuels(W 90%+SiO 2 10%) were manufactured and the main devices were tested for the oxidation and recovery rate of its. Here the expansion ratio of simulation fuel is similar to U 3 O 8 (2.7). At the second year step(2008), with the constant ration of rod-cuts volume and expansion ratio of U 3 O 8 (2.7), we produced a theoretical equation that can estimate the volume of rod-cuts according to a variation of their weight and lengths. We considered various materials such as ceramics and Ni-Cr, finally, the APM material which can constantly maintain against high temperature(1,200 .deg. C) and vacuum(1 torr) was selected and a vol-oxidizer was designed. At the third year step(2009), in order to manufacture a high-throughput vol-oxidizer, we have analyzed the vol-oxidizer for remote operability and maintainability, also the remote assembling and disassembling possibilities of the selected modules have been analyzed in terms of visibility, interference, approach, weight, and so on. We have presented final modular design and manufactured a high-throughput vol-oxidizer. Also, we have conducted the blank, heating(over 500 .deg. C) and hull separation test(capacity : 50 kg HM/batch, hull length 50mm) on the high-throughput vol-oxidizer. Also, these design technologies for the high-throughput vol-oxidizer will be utilized in the development of a more efficient vol-oxidizer with higher

A special issue on reviews in biomedical applications of nanomaterials, tissue engineering, stem cells, bioimaging, and toxicity.

Science.gov (United States)

Nalwa, Hari Singh

2014-10-01

This second special issue of the Journal of Biomedical Nanotechnology in a series contains another 30 state-of-the-art reviews focused on the biomedical applications of nanomaterials, biosensors, bone tissue engineering, MRI and bioimaging, single-cell detection, stem cells, endothelial progenitor cells, toxicity and biosafety of nanodrugs, nanoparticle-based new therapeutic approaches for cancer, hepatic and cardiovascular disease.

Green energy: Water-containing acetone–butanol–ethanol diesel blends fueled in diesel engines

International Nuclear Information System (INIS)

Chang, Yu-Cheng; Lee, Wen-Jhy; Lin, Sheng-Lun; Wang, Lin-Chi

2013-01-01

Highlights: • Water-containing ABE solution (W-ABE) in the diesel is a stable fuel blends. • W-ABE can enhance the energy efficiency of diesel engine and act as a green energy. • W-ABE can reduce the PM, NOx, and PAH emissions very significantly. • The W-ABE can be manufactured from waste bio-mass without competition with food. • The W-ABE can be produced without dehydration process and no surfactant addition. - Abstract: Acetone–Butanol–Ethanol (ABE) is considered a “green” energy resource because it emits less carbon than many other fuels and is produced from biomass that is non-edible. To simulate the use of ABE fermentation products without dehydration and no addition of surfactants, a series of water-containing ABE-diesel blends were investigated. By integrating the diesel engine generator (DEG) and diesel engine dynamometer (DED) results, it was found that a diesel emulsion with 20 vol.% ABE-solution and 0.5 vol.% water (ABE20W0.5) enhanced the brake thermal efficiencies (BTE) by 3.26–8.56%. In addition, the emissions of particulate matter (PM), nitrogen oxides (NOx), polycyclic aromatic hydrocarbons (PAHs), and the toxicity equivalency of PAHs (BaP eq ) were reduced by 5.82–61.6%, 3.69–16.4%, 0.699–31.1%, and 2.58–40.2%, respectively, when compared to regular diesel. These benefits resulted from micro-explosion mechanisms, which were caused by water-in-oil droplets, the greater ABE oxygen content, and the cooling effect that is caused by the high vaporization heat of water-containing ABE. Consequently, ABE20W0.5, which is produced by environmentally benign processes (without dehydration and no addition of surfactants), can be a good alternative to diesel because it can improve energy efficiency and reduce pollutant emissions

Review Essay A history of colonialism through post-colonial lenses ...

African Journals Online (AJOL)

Review Essay A history of colonialism through post-colonial lenses: reading Mahmood Mamdani's citizen and subject. Sanya Osha. Abstract. No Abstract. The Nigerian Journal of Economic History Vol. 2, 1999: 155-161. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

Electrochemical energy engineering: a new frontier of chemical engineering innovation.

Science.gov (United States)

Gu, Shuang; Xu, Bingjun; Yan, Yushan

2014-01-01

One of the grand challenges facing humanity today is a safe, clean, and sustainable energy system where combustion no longer dominates. This review proposes that electrochemical energy conversion could set the foundation for such an energy system. It further suggests that a simple switch from an acid to a base membrane coupled with innovative cell designs may lead to a new era of affordable electrochemical devices, including fuel cells, electrolyzers, solar hydrogen generators, and redox flow batteries, for which recent progress is discussed using the authors' work as examples. It also notes that electrochemical energy engineering will likely become a vibrant subdiscipline of chemical engineering and a fertile ground for chemical engineering innovation. To realize this vision, it is necessary to incorporate fundamental electrochemistry and electrochemical engineering principles into the chemical engineering curriculum.

South African Journal of Higher Education - Vol 19 (2005)

African Journals Online (AJOL)

South African Journal of Higher Education - Vol 19 (2005) ... The 'idea of engagement' and 'the African University in the 21st Century': Some ... The challenges of knowledge production by researchers in Public Administration, a South African ...

Beneath the Numbers: A Review of Gender Disparities in Undergraduate Education across Science, Technology, Engineering, and Math Disciplines

Science.gov (United States)

Eddy, Sarah L.; Brownell, Sara E.

2016-01-01

This focused collection explores inequalities in the experiences of women in physics. Yet, it is important for researchers to also be aware of and draw insights from common patterns in the experiences of women across science, technology, engineering and mathematics (STEM) disciplines. Here, we review studies on gender disparities across college…

(JASR) Vol. 12, No. 2, 2012 DEPLETING FOREST RESOURCES

African Journals Online (AJOL)

HP

deteriorating forest resources of Nigeria and its impact on climate change. Key words: Forest Resources, ... Mangrove Forest. Sub Total. 905,930 .... South America” Global Biogeographical Cycle vol 9, pp 329-350. Miller, K. R., Reid, W. V., ...

Pan African Medical Journal - Vol 16, No 1 (2014)

African Journals Online (AJOL)

Pan African Medical Journal - Vol 16, No 1 (2014) .... Cancer incidence in Morocco: report from Casablanca registry 2005-2007 · EMAIL FREE FULL .... Maladie de Leo-Buerger faisant suite à une intoxication au cannabis · EMAIL FREE FULL ...

African Heath Sciences Vol 8 No 1.p65

African Journals Online (AJOL)

Harriet

African Health Sciences Vol 8 No 1 March 2008. 36 ... Objective:To highlight difficulties in the diagnosis and management of non-traumatic perforation of small bowel. Material and ..... of three operations for typhoid perforation. Br J Surg. 1997;.

The thermodynamics of heat- and mass exchange in chemical engineering. Vol. 1. 2. rev. ed.

International Nuclear Information System (INIS)

Matz, G.

1979-01-01

The second and completely revised edition of the approved textbook 'The thermodynamics of heat- and mass exchange in chemical engineering' is devoted to students of technical and natural science disciplines as well as to practicians and scientists, which are confronted with thermodynamical problems of chemical engineering. Starting from the different phases and properties of matter, the first and the second law of thermodynamics are discussed together with many applications. After an introduction of the equilibrium state, the general principle of similarity for heat- and mass exchange is discussed, considering in particular the heat- and mass exchange in the counter flow between two phases. In a final chapter, the heat- and mass exchange between the vapor- and liquid phase is discussed, with special emphasis on problems as evaporation and drying. (orig./HK) [de

23rd International Conference on Industrial Engineering and Engineering Management 2016

CERN Document Server

Shen, Jiang; Dou, Runliang

2017-01-01

International Conference on Industrial Engineering and Engineering Management is sponsored by Chinese Industrial Engineering Institution, CMES, which is the unique national-level academic society of Industrial Engineering. The conference is held annually as the major event in this area. Being the largest and the most authoritative international academic conference held in China, it supplies an academic platform for the experts and the entrepreneurs in International Industrial Engineering and Management area to exchange their research results. Many experts in various fields from China and foreign countries gather together in the conference to review, exchange, summarize and promote their achievements in Industrial Engineering and Engineering Management fields. Some experts pay special attention to the current situation of the related techniques application in China as well as their future prospect, such as Industry 4.0, Green Product Design, Quality Control and Management, Supply Chain and logistics Management...

Software Engineering Improvement Plan

Science.gov (United States)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Detonation Jet Engine. Part 2--Construction Features

Science.gov (United States)

Bulat, Pavel V.; Volkov, Konstantin N.

2016-01-01

We present the most relevant works on jet engine design that utilize thermodynamic cycle of detonative combustion. Detonation engines of various concepts, pulse detonation, rotational and engine with stationary detonation wave, are reviewed. Main trends in detonation engine development are discussed. The most important works that carried out…

Fusion engineering. Vol. 2

International Nuclear Information System (INIS)

Young, N.E.; Pinter, G.R.; Spinos, F.R.

1983-01-01

An x-ray crystal spectrometer is scheduled for installation in the Tokamak Fusion Test Reactor in 1984 coinciding with the TFTR deuterium operation phase. This spectrometer is designed to measure the spectra of hydrogen-like and helium-like impurities in the plasma. Ion temperatures electron temperatures, electron density and the distribution of impurity charge states are obtained from the x-ray detector count ratios. The velocity of the toroidal rotation of the plasma is also discerned using this device. The x-ray crystal spectrometer is based on the Bragg diffraction of x-rays from a curved crystal impinging on a multiwire proportional counter. Only those x-rays that satisfy the Bragg relationship (lambda =2d sin theta) will be diffracted and strike the proportional counter. This paper is limited to a discussion of the physical characteristics of the spectrometer and the methods devised to satisfy the operational aspects of such a device

Schostakowitsch. Orchesterlieder (Vol. 2), Neeme Järvi / Werner Pfister

Index Scriptorium Estoniae

Pfister, Werner

1996-01-01

Uuest heliplaadist "Schostakowitsch. Orchesterlieder (Vol. 2): Sechs Romanzen op. 21, Sechs Gedichte op. 143a, Suite auf Verse von Michelangelo Buonarroti op. 145a. Göteborger Sinfoniker, Neeme Järvi". DG CD 447 085-2 (WD: 71'06") DDD

General engineering knowledge

CERN Document Server

Mcgeorge, H D

2012-01-01

This book covers the general engineering knowledge required by candidates for the Department of Transport's Certificates of Competency in Marine Engineering, Class One and Class Two. The text is updated throughout in this third edition, and new chapters have been added on production of fresh water and on noise and vibration. Reference is also provided to up-to-date papers and official publications on specialized topics. These updates ensure that this little volume will continue to be a useful pre-examination and revision text. - Marine Engineers Review, January 1992

Fatigue Crack Growth Behavior and Microstructural Mechanisms in Ti-6Al-4V Manufactured by Laser Engineered Net Shaping

Science.gov (United States)

2015-12-01

rapid manufactured Inconel 625 structures, Materials Science and Engineering A, vol. 527(29-30), pp. 7490-7497, 2010. 18 Approved for public release...4V and Inconel 718. Although porosity was observed in both laser deposited materials, their fatigue performance was found comparable to their...growth 2 Approved for public release; distribution is unlimited rates of laser rapid manufactured and wrought In- 625 alloys. It was noted that fatigue

How to Reduce Corruption | Collier | LBS Management Review

African Journals Online (AJOL)

No Abstract Available LBS Management Review Vol.4(2) 1999: 135-147. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/lbsmr.v4i2.24462 · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors ...

Reforming Ethiopia's Expropriation Law | Abdo | Mizan Law Review

African Journals Online (AJOL)

Mizan Law Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 2 (2015) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Download this PDF file. The PDF file you selected should load here if ...

Somatotropin physiology - a review | van der Walt | South African ...

African Journals Online (AJOL)

South African Journal of Animal Science. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 24, No 1 (1994) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Somatotropin physiology - a review. JG van der ...

Music and Health Messages | Amu | Research Review of the ...

African Journals Online (AJOL)

Research Review of the Institute of African Studies. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 17, No 1 (2001) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

African Journal of Biotechnology - Vol 12, No 21 (2013)

African Journals Online (AJOL)

African Journal of Biotechnology - Vol 12, No 21 (2013) ... Studies of the genetics of inheritance of stem rust resistance in bread wheat · EMAIL FREE .... Evaluation of the effect of ginger modified cassava starch as thickener in the formulation of ...

Cross sections for atomic processes, vol. 2

International Nuclear Information System (INIS)

Takayanagi, Kazuo; Suzuki, Hiroshi; Otani, Shunsuke

1977-09-01

This data collection book contains the data on all processes involving hydrogen and helium isotopes, their ions, electrons and photons, collected systematically and comprehensively, and is compiled subsequently to Vol. 1 as one of the works of the data collection study group in the Institute of Plasma Physics, Nagoya University, Japan. The items of the contents will include energy level, multiplicately excited state, radiation process, electron collision, ionic collision, recombination, collision of neutral atoms, colliding process involving molecules, and other processes. However, the first edition this time contains energy level, radiation process, electron collision and ionic collision, and the data on remaining items are now under collection. Though some criticisms have been heard about Vol. 1, the authors consider that such comprehensive collection based on systematic classification is the foundation of making a generalized data bank expected to become necessary in future. Thus the data collection book includes all relevant processes, and records the experimental data and theoretically calculated results in principle without modification by selecting them systematically. This year, investigation on data evaluation is taken up also as one of the tasks of the study group. (Wakatsuki, Y.)

Topical report review status, July 15, 1983. Vol. 7, No. 1

International Nuclear Information System (INIS)

1983-08-01

A Topical Report Review Status is scheduled to be published semi-annually. The primary purpose of this document is to provide periodic progress reports of on-going topical report reviews, to identify those topical reports for which the Nuclear Regulatory Commission (NRC) staff review has been completed and, to the extent practicable, to provide NRC management with sufficient information regarding the conduct of the topical report program to permit taking whatever actions deemed necessary or appropriate. This document is also intended to be a source of information to NRC Licensing Project Managers and other NRC personnel regarding the status of topical reports which may be referenced in applications for which they have responsibility

Review of the Usefulness of Various Rotational Seismometers with Laboratory Results of Fibre-Optic Ones Tested for Engineering Applications

Directory of Open Access Journals (Sweden)

Leszek R. Jaroszewicz

2016-12-01

Full Text Available Starting with descriptions of rotational seismology, areas of interest and historical field measurements, the fundamental requirements for rotational seismometers for seismological and engineering application are formulated. On the above basis, a review of all existing rotational seismometers is presented with a description of the principles of their operation as well as possibilities to fulfill formulated requirements. This review includes mechanical, acoustical, electrochemical and optical devices and shows that the last of these types are the most promising. It is shown that optical rotational seismometer based on the ring-laser gyroscope concept is the best for seismological applications, whereas systems based on fiber-optic gyroscopes demonstrate parameters which are also required for engineering applications. Laboratory results of the Fibre-Optic System for Rotational Events & Phenomena Monitoring using a small 1-D shaking table modified to generate rotational excitations are presented. The harmonic and time-history tests demonstrate its usefulness for recording rotational motions with rates up to 0.25 rad/s.

Data systems and computer science: Software Engineering Program

Science.gov (United States)

Zygielbaum, Arthur I.

1991-01-01

An external review of the Integrated Technology Plan for the Civil Space Program is presented. This review is specifically concerned with the Software Engineering Program. The goals of the Software Engineering Program are as follows: (1) improve NASA's ability to manage development, operation, and maintenance of complex software systems; (2) decrease NASA's cost and risk in engineering complex software systems; and (3) provide technology to assure safety and reliability of software in mission critical applications.

Engineering insect-resistant crops: A review

African Journals Online (AJOL)

dgeorge

African Journal of Biotechnology ... Transgenic crops engineered for enhanced levels of resistance to insect ... this background that research work targeting other candidate genes such as ... nisms, and potential deleterious environmental effects. ... The global market value of biotech crops was esti- .... located in repeat 11.

Aetiological Agents of Ear Discharge: A Two year Review in a ...

African Journals Online (AJOL)

Journal Home > Vol 48, No 2 (2014) > ... Methodology: This was a retrospective review of laboratory records of all ear swabs submitted for culture over a two year ... Data was obtained on demographic characteristics of patients, clinical ... of the discharging ear was Pseudomonas spp followed by Staphylococcus aureus.

IECEC '91; Proceedings of the 26th Intersociety Energy Conversion Engineering Conference, Boston, MA, Aug. 4-9, 1991. Vol. 5 - Renewable resource systems, Stirling engines and applications, systems and cycles

International Nuclear Information System (INIS)

Anon.

1991-01-01

Various papers on energy conversion engineering are presented. The general topics considered are: developments in nuclear power, energy from waste and biomass, system performance and materials in photovoltaics, solar thermal energy, wind energy systems, Stirling cycle analysis, Stirling cycle power, Stirling component technology, Stirling cooler/heat pump developments, Stirling engine concepts, Stirling engine design and optimization, Stirling engine dynamics and response, Stirling engine solar terrestrial, advanced cogeneration, AMTC, fossil fuel systems and technologies, marine energy

Lineage of global civil engineering. Global civil engineering no keifu

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, M

1994-04-15

This paper considers which way the global civil engineering should go in the future. Civil engineering has now a paradigm with a new dimension debuted as the global environmental problems are taken up specifically. Achieving the target of civil engineering requires a critical review that how the cost effect and efficiency discussions in only the dimensions of the conventional technologies and economies can be incorporated into the dimensions and measures of new fields to create the new horizons. Conceiving the relationship between civil engineered structures and environmental climate encounters the indispensable judgment criterion on how such social scientific conditions as weather, culture, religion, economy, and politics are combined to reach a judgment. The global civil engineering is desired to have the ideas and directional role to work on the ultimate assignment of environment and development called a global environmental problem analytically, comprehensively, innovatively and creatively as the civil engineering science, rather than as a mere existence of one area of the advanced civil engineering science. 5 refs., 1 tab.

A review of optimization techniques used in the design of fibre composite structures for civil engineering applications

International Nuclear Information System (INIS)

Awad, Ziad K.; Aravinthan, Thiru; Zhuge, Yan; Gonzalez, Felipe

2012-01-01

Highlights: → We reviewed existing optimization techniques of fibre composite structures. → Proposed an improved methodology for design optimization. → Comparison showed the MRDO is most suitable. -- Abstract: Fibre composite structures have become the most attractive candidate for civil engineering applications. Fibre reinforced plastic polymer (FRP) composite materials have been used in the rehabilitation and replacement of the old degrading traditional structures or build new structures. However, the lack of design standards for civil infrastructure limits their structural applications. The majority of the existing applications have been designed based on the research and guidelines provided by the fibre composite manufacturers or based on the designer's experience. It has been a tendency that the final structure is generally over-designed. This paper provides a review on the available studies related to the design optimization of fibre composite structures used in civil engineering such as; plate, beam, box beam, sandwich panel, bridge girder, and bridge deck. Various optimization methods are presented and compared. In addition, the importance of using the appropriate optimization technique is discussed. An improved methodology, which considering experimental testing, numerical modelling, and design constrains, is proposed in the paper for design optimization of composite structures.

Combustion engineering

CERN Document Server

Ragland, Kenneth W

2011-01-01

Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

Book Review: Robotic Surgery by G Watanabe | Dawka | Archives of ...

African Journals Online (AJOL)

Archives of Medical and Biomedical Research. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 1, No 3 (2014) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Book Review: Robotic Surgery by G ...

Editorial: Subjective well-being in Africa | Botha | African Review of ...

African Journals Online (AJOL)

African Review of Economics and Finance. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 7, No 1 (2015) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Editorial: Subjective well-being in Africa.

Adding Value to the Learning Process by Online Peer Review Activities: Towards the Elaboration of a Methodology to Promote Critical Thinking in Future Engineers

Science.gov (United States)

Dominguez, Caroline; Nascimento, Maria M.; Payan-Carreira, Rita; Cruz, Gonçalo; Silva, Helena; Lopes, José; Morais, Maria da Felicidade A.; Morais, Eva

2015-01-01

Considering the results of research on the benefits and difficulties of peer review, this paper describes how teaching faculty, interested in endorsing the acquisition of communication and critical thinking (CT) skills among engineering students, has been implementing a learning methodology throughout online peer review activities. While…

51. Meeting of the Chemical Societies: Almanac of Contributions, Vol. Program, 1, 2, 3, 4 Molecular Models (Workshop)

International Nuclear Information System (INIS)

Uher, M.; Benes, P.; Carsky, J.; Ctrnactova, H.; Fecenko, J.; Fellner, P.; Hodul, P.; Koprda, V.; Kratochvil, B.; Krkoska, P.; Kuruc, J.; Lehotay, J.; Matousek, J.; Milichovsky, P.; Omastova, M.; Petrus, L. jr.; Petrus, L. sr.; Schwendt, P.; Silny, P.; Sevcik, P.; Toma, S.; Uherova, R.; Zachar, P.

1999-09-01

The publication has been set up as a abstracts of the meeting dealing with different chemical problems. The book (Vol. 1) consists of the sections: All-plenary lectures (9 papers); (D) History of the chemistry (14); (K) Didactics of chemistry (32); The book (Vol. 2) consists of the sections: (A) Analytical chemistry (48); (B) Inorganic chemistry (75); (C) Physical chemistry (27); (F) Nuclear chemistry and radioecology (12); (L) Environmental chemistry and toxicology (33); (M) Agricultural chemistry (20). The book (Vol. 3) consists of the sections: (E) Wood, pulp, paper (15); (G) Macromolecular chemistry (42); (H) Organic chemistry, bio-organic chemistry and pharmaceutical chemistry (96); (I) Food chemistry and biochemistry (34); (J) Textile, fibres and foil materials (9). The book (Vol. 4) consists of the workshop Molecular models (3 papers)

Light-duty diesel engine development status and engine needs

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

This report reviews, assesses, and summarizes the research and development status of diesel engine technology applicable to light-duty vehicles. In addition, it identifies specific basic and applied research and development needs in light-duty diesel technology and related health areas where initial or increased participation by the US Government would be desirable. The material presented in this report updates information provided in the first diesel engine status report prepared by the Aerospace Corporation for the Department of Energy in September, 1978.

An end user evaluation of query formulation and results review tools in three medical meta-search engines.

Science.gov (United States)

Leroy, Gondy; Xu, Jennifer; Chung, Wingyan; Eggers, Shauna; Chen, Hsinchun

2007-01-01

Retrieving sufficient relevant information online is difficult for many people because they use too few keywords to search and search engines do not provide many support tools. To further complicate the search, users often ignore support tools when available. Our goal is to evaluate in a realistic setting when users use support tools and how they perceive these tools. We compared three medical search engines with support tools that require more or less effort from users to form a query and evaluate results. We carried out an end user study with 23 users who were asked to find information, i.e., subtopics and supporting abstracts, for a given theme. We used a balanced within-subjects design and report on the effectiveness, efficiency and usability of the support tools from the end user perspective. We found significant differences in efficiency but did not find significant differences in effectiveness between the three search engines. Dynamic user support tools requiring less effort led to higher efficiency. Fewer searches were needed and more documents were found per search when both query reformulation and result review tools dynamically adjust to the user query. The query reformulation tool that provided a long list of keywords, dynamically adjusted to the user query, was used most often and led to more subtopics. As hypothesized, the dynamic result review tools were used more often and led to more subtopics than static ones. These results were corroborated by the usability questionnaires, which showed that support tools that dynamically optimize output were preferred.

Engineering in translational medicine

CERN Document Server