Statistics and data analysis for financial engineering with R examples

CERN Document Server

Ruppert, David

2015-01-01

The new edition of this influential textbook, geared towards graduate or advanced undergraduate students, teaches the statistics necessary for financial engineering. In doing so, it illustrates concepts using financial markets and economic data, R Labs with real-data exercises, and graphical and analytic methods for modeling and diagnosing modeling errors. Financial engineers now have access to enormous quantities of data. To make use of these data, the powerful methods in this book, particularly about volatility and risks, are essential. Strengths of this fully-revised edition include major additions to the R code and the advanced topics covered. Individual chapters cover, among other topics, multivariate distributions, copulas, Bayesian computations, risk management, multivariate volatility and cointegration. Suggested prerequisites are basic knowledge of statistics and probability, matrices and linear algebra, and calculus. There is an appendix on probability, statistics and linear algebra. Practicing fina...

GAUGE R&R FOR AN OPTICAL MICROMETER INDUSTRIAL TYPE MACHINE

Directory of Open Access Journals (Sweden)

Georgia A. Louka

2010-12-01

Full Text Available The measurement of the uncertainty of a metric system, as 'Gauge R&R' and the collation of results between the Xbar & R and the ANOVA method, are extended in this essay. In an academic school laboratory we accomplished a sequence of measurements with the use of an Optical Micrometer Industrial Type Machine (MUL 300. This paper analyzes the measurement system that used in the laboratory and checks the reasons of the variability's provocation that observed in the machine, between the theoretical calculations and measurements. In order to find out this problem, we will use the 'Gage Repeatability and Reproducibility' technique of Measurement System Analysis (M.S.A.. This technique uses analysis of variance. In addition, will use Minitab program in order to find out the factors that we have in the whole experiment as enlarge the problem of measurements. In this paper, a statistical method using the correlation between Gage R&R and process capability indices is proposed for evaluating the adequacy of the acceptance criteria of P/T ratio. Finally, a comparative analysis has also been performed for evaluating the accuracy of Gage R&R between two methods (ANOVA and R- Xbar method. Hopefully, the results of this research can provide a useful reference for quality practitioners in various industries.

Performance comparison of a novel configuration of beta-type Stirling engines with rhombic drive engine

International Nuclear Information System (INIS)

Solmaz, Hamit; Karabulut, Halit

2014-01-01

Highlights: • The paper describes a novel arrangement of a beta-type Stirling engine. • Its performance was compared with rhombic drive engine. • The power output of the engine was found to be greater than rhombic drive. • Efficiency was found to be higher than rhombic drive at the same working fluid mass. • Efficiency was found to be lower than rhombic drive at the same charge pressure. - Abstract: This study presents a beta type Stirling engine mechanism and its performance analysis. The displacer motion of the engine is performed by a lever mechanism. The performance of the engine was investigated via comparing with a rhombic-drive engine possessing an equal sided rhombic. Comparison was made for kinematic behaviors, power and thermal efficiency. For comparison; the piston swept volume, the inner heat transfer area, the hot and cold end temperatures, the inner heat transfer coefficient, charge pressure and dead volumes were kept equal for both engines. As working fluid the helium was used. Thermodynamic treatments of engines were performed via the nodal analysis. The power of the lever driven engine was found to be greater than the power of the rhombic drive engine. Under the equal charge pressure, the thermal efficiency of the lever driven engine was found to be lower than the efficiency of the rhombic drive engine however, under the equal working fluid mass the thermal efficiency of the lever driven engine was found to be greater than that of the rhombic drive engine. The external volume and mass of the lever driven engine is lower than the rhombic drive engine

Comparative genomic analysis uncovers 3 novel loci encoding type six secretion systems differentially distributed in Salmonella serotypes

Directory of Open Access Journals (Sweden)

Santiviago Carlos A

2009-08-01

Full Text Available Abstract Background The recently described Type VI Secretion System (T6SS represents a new paradigm of protein secretion in bacteria. A number of bioinformatic studies have been conducted to identify T6SS gene clusters in the available bacterial genome sequences. According to these studies, Salmonella harbors a unique T6SS encoded in the Salmonella Pathogenicity Island 6 (SPI-6. Since these studies only considered few Salmonella genomes, the present work aimed to identify novel T6SS loci by in silico analysis of every genome sequence of Salmonella available. Results The analysis of sequencing data from 44 completed or in progress Salmonella genome projects allowed the identification of 3 novel T6SS loci. These clusters are located in differentially-distributed genomic islands we designated SPI-19, SPI-20 and SPI-21, respectively. SPI-19 was identified in a subset of S. enterica serotypes including Dublin, Weltevreden, Agona, Gallinarum and Enteritidis. In the later, an internal deletion eliminated most of the island. On the other hand, SPI-20 and SPI-21 were restricted to S. enterica subspecies arizonae (IIIa serotype 62:z4,z23:-. Remarkably, SPI-21 encodes a VgrG protein containing a C-terminal extension similar to S-type pyocins of Pseudomonas aeruginosa. This is not only the first evolved VgrG described in Salmonella, but also the first evolved VgrG including a pyocin domain described so far in the literature. In addition, the data indicate that SPI-6 T6SS is widely distributed in S. enterica and absent in serotypes Enteritidis, Gallinarum, Agona, Javiana, Paratyphi B, Virchow, IIIa 62:z4,z23:- and IIIb 61:1,v:1,5,(7. Interestingly, while some serotypes harbor multiple T6SS (Dublin, Weltvreden and IIIa 62:z4,z23:- others do not encode for any (Enteritidis, Paratyphi B, Javiana, Virchow and IIIb 61:1,v:1,5,(7. Comparative and phylogenetic analyses indicate that the 4 T6SS loci in Salmonella have a distinct evolutionary history. Finally, we

A discussion of the several types of two-stroke-cycle engines

Science.gov (United States)

Venediger, Herbert J

1935-01-01

This report discusses different types of two-stroke engines as well as the three most important design factors: volume of scavenge and charge delivery, scavenging process (scavenging result), and result of charge. Some of the types of engines discussed include: single cylinder with crank-chamber scavenge pump and auxiliary suction piston linked to working connecting rod; and two cylinder engines with a rotary scavenge pump arrangement. Three and four cylinder engines are also discussed in various designs.

rFN/Cad-11-Modified Collagen Type II Biomimetic Interface Promotes the Adhesion and Chondrogenic Differentiation of Mesenchymal Stem Cells

Science.gov (United States)

Guo, Hongfeng; Zhang, Yuan; Li, Zhengsheng; Kang, Fei; Yang, Bo; Kang, Xia; Wen, Can; Yan, Yanfei; Jiang, Bo; Fan, Yujiang

2013-01-01

Properties of the cell-material interface are determining factors in the successful function of cells for cartilage tissue engineering. Currently, cell adhesion is commonly promoted through the use of polypeptides; however, due to their lack of complementary or modulatory domains, polypeptides must be modified to improve their ability to promote adhesion. In this study, we utilized the principle of matrix-based biomimetic modification and a recombinant protein, which spans fragments 7–10 of fibronectin module III (heterophilic motif ) and extracellular domains 1–2 of cadherin-11 (rFN/Cad-11) (homophilic motif ), to modify the interface of collagen type II (Col II) sponges. We showed that the designed material was able to stimulate cell proliferation and promote better chondrogenic differentiation of rabbit mesenchymal stem cells (MSCs) in vitro than both the FN modified surfaces and the negative control. Further, the Col II/rFN/Cad-11-MSCs composite stimulated cartilage formation in vivo; the chondrogenic effect of Col II alone was much less significant. These results suggested that the rFN/Cad-11-modified collagen type II biomimetic interface has dual biological functions of promoting adhesion and stimulating chondrogenic differentiation. This substance, thus, may serve as an ideal scaffold material for cartilage tissue engineering, enhancing repair of injured cartilage in vivo. PMID:23919505

French Engineering Graduates in Corporate R&D: Is It Worthwhile?

Science.gov (United States)

Bonnard, Claire; Bourdon, Jean; Paul, Jean-Jacques

2009-01-01

In the early 1990s, several studies pointed out a significant gap in earnings between engineers in private firms working in Research and Development (R&D) and those in other activities. The purpose of this article is to assess, from conventional Mincerian models, to what extent these findings are still valid. The different levels of…

R and D needs assessment for the Engineering Test Facility

International Nuclear Information System (INIS)

1980-10-01

The Engineering Test Facility (ETF), planned to be the next major US magnetic fusion device, has its mission (1) to provide the capability for moving into the engineering phase of fusion development and (2) to provide a test-bed for reactor components in a fusion environment. The design, construction, and operation of the ETF requires an increasing emphasis on certain key research and development (R and D) programs in magnetic fusion in order to provide the necessary facility design base. This report identifies these needs and discusses the apparent inadequacies of the presently planned US program to meet them, commensurate with the ETF schedule

γ-Aminobutyric Acid Type B (GABAB) Receptor Internalization Is Regulated by the R2 Subunit*

Science.gov (United States)

Hannan, Saad; Wilkins, Megan E.; Dehghani-Tafti, Ebrahim; Thomas, Philip; Baddeley, Stuart M.; Smart, Trevor G.

2011-01-01

γ-Aminobutyric acid type B (GABAB) receptors are important for slow synaptic inhibition in the CNS. The efficacy of inhibition is directly related to the stability of cell surface receptors. For GABAB receptors, heterodimerization between R1 and R2 subunits is critical for cell surface expression and signaling, but how this determines the rate and extent of receptor internalization is unknown. Here, we insert a high affinity α-bungarotoxin binding site into the N terminus of the R2 subunit and reveal its dominant role in regulating the internalization of GABAB receptors in live cells. To simultaneously study R1a and R2 trafficking, a new α-bungarotoxin binding site-labeling technique was used, allowing α-bungarotoxin conjugated to different fluorophores to selectively label R1a and R2 subunits. This approach demonstrated that R1a and R2 are internalized as dimers. In heterologous expression systems and neurons, the rates and extents of internalization for R1aR2 heteromers and R2 homomers are similar, suggesting a regulatory role for R2 in determining cell surface receptor stability. The fast internalization rate of R1a, which has been engineered to exit the endoplasmic reticulum, was slowed to that of R2 by truncating the R1a C-terminal tail or by removing a dileucine motif in its coiled-coil domain. Slowing the rate of internalization by co-assembly with R2 represents a novel role for GPCR heterodimerization whereby R2 subunits, via their C terminus coiled-coil domain, mask a dileucine motif on R1a subunits to determine the surface stability of the GABAB receptor. PMID:21724853

Comparison Based on Exergetic Analyses of Two Hot Air Engines: A Gamma Type Stirling Engine and an Open Joule Cycle Ericsson Engine

Directory of Open Access Journals (Sweden)

Houda Hachem

2015-10-01

Full Text Available In this paper, a comparison of exergetic models between two hot air engines (a Gamma type Stirling prototype having a maximum output mechanical power of 500 W and an Ericsson hot air engine with a maximum power of 300 W is made. Referring to previous energetic analyses, exergetic models are set up in order to quantify the exergy destruction and efficiencies in each type of engine. The repartition of the exergy fluxes in each part of the two engines are determined and represented in Sankey diagrams, using dimensionless exergy fluxes. The results show a similar proportion in both engines of destroyed exergy compared to the exergy flux from the hot source. The compression cylinders generate the highest exergy destruction, whereas the expansion cylinders generate the lowest one. The regenerator of the Stirling engine increases the exergy resource at the inlet of the expansion cylinder, which might be also set up in the Ericsson engine, using a preheater between the exhaust air and the compressed air transferred to the hot heat exchanger.

MANUFACTURING AND TESTING OF A V-TYPE STIRLING ENGINE

Directory of Open Access Journals (Sweden)

B. Demir

2012-01-01

Full Text Available In this study, a V-type Stirling engine with 163 cc total swept volume was designed and manufactured. Air was used as working fluid. Performance tests were conducted at the range of 1-3 bar charge pressure and within the range of hot source temperature 700-1050 °C. Experimental results are given. Variation of engine power and torque with hot source temperature at various air charge pressure are tested. Also variation of engine torque with engine speed for different air charge pressure are tested. According to experimental analysis, the maximum engine power was obtained as 21.334 W at 1050 ˚C hot source temperature and 1.5 bars charge pressure.

HARMONICS SURFACES OF GRAPHIC TYPE IN R3

Directory of Open Access Journals (Sweden)

Carlos Carrión Riveros

2016-06-01

Full Text Available In this research we study harmonic surfaces immersed in R3. We dened Harmonic surfaces of graphic type and showed that a harmonious surface graphic type is minimal if and only if it is part of a plane or a helix. Also, we give a characterization of harmonic surfaces graphic type parameterized by asymptotic lines and some examples.

Effect of engine parameters and gaseous fuel type on the cyclic variability of dual fuel engines

Energy Technology Data Exchange (ETDEWEB)

Mohamed Y.E. Selim [United Arab Emirates University, Al-Ain (United Arab Emirates). Mechanical Engineering Department, Faculty of Engineering

2005-05-01

This paper presents an analysis of the cycle-to-cycle combustion variation as reflected in the combustion pressure data of a single cylinder, naturally aspirated, four stroke, Ricardo E6 engine converted to run as dual fuel engine on diesel and gaseous fuel of LPG or methane. A measuring set-up consisting of a piezo-electric pressure transducer with charge amplifier and fast data acquisition card installed on an IBM microcomputer was used to gather the data of up to 1200 consecutive combustion cycles of the cylinder under various combination of engine operating and design parameters. These parameters included type of gaseous fuel, engine load, compression ratio, pilot fuel injection timing, pilot fuel mass, and engine speed. The data for each operating conditions were analyzed for the maximum pressure, the maximum rate of pressure rise representing the combustion noise, and indicated mean effective pressure. The cycle-to-cycle variation is expressed as the mean value, standard deviation, and coefficient of variation of these three parameters. It was found that the type of gaseous fuel and engine operating and design parameters affected the combustion noise and its cyclic variation and these effects have been presented. 21 refs., 6 figs., 1 tab.

Retrospective Benefit-Cost Evaluation of U.S. DOE Vehicle Combustion Engine R&D Investments: Impacts of a Cluster of Energy Technologies

Energy Technology Data Exchange (ETDEWEB)

Link, Albert N. [Univ. of North Carolina, Greensboro, NC (United States)

2010-05-01

Advanced Combustion Engine R&D (ACE R&D) is one of the subprograms within DOE's Vehicle Technologies Office. The ACE subprogram's R&D is conducted in cooperation with the DOE Combustion Research Facility (CRF). This report summarizes the findings from a retrospective study of the net benefits to society from investments by DOE (both EERE and cooperative CRF efforts) in laser diagnostic and optical engine technologies and combustion modeling for heavy-duty diesel engines.

Comparisons of system benefits and thermo-economics for exhaust energy recovery applied on a heavy-duty diesel engine and a light-duty vehicle gasoline engine

International Nuclear Information System (INIS)

Wang, Tianyou; Zhang, Yajun; Zhang, Jie; Peng, Zhijun; Shu, Gequn

2014-01-01

Highlights: • Comparisons of exhaust energy recovery are launched between two types of engine. • System performances are analyzed in terms of benefits and thermo-economics. • Diesel engine system presents superior to gasoline type in economic applicability. • Only diesel engine system using water under full load meets the economic demand. - Abstract: Exhaust energy recovery system (EERS) based on Rankine cycle (RC) in internal combustion engines have been studied mainly on heavy-duty diesel engines (D) and light-duty vehicle gasoline engines (G), however, little information available on systematical comparisons and evaluations between the two applications, which is a particularly necessary summary for clarifying the differences. In this paper, the two particular systems are compared quantitatively using water, R141b, R123 and R245fa as working fluids. The influences of evaporating pressure, engine type and load on the system performances are analyzed with multi-objectives, including the thermal efficiency improvement, the reduced CO 2 emission, the total heat transfer area per net power output (APP), the electricity production cost (EPC) and the payback period (PBP). The results reveal that higher pressure and engine load would be attractive for better performances. R141b shows the best performances in system benefits for the D-EERS, while water exhibits the largest contributions in the G-EERS. Besides, water performs the best thermo-economics, and R245fa serves as the most uneconomical fluid. The D-EERS presents superior to the G-EERS in the economic applicability as well as much more CO 2 emission reductions, although with slightly lower thermal efficiency improvement, and only the D-EERS with water under the full load meets the economic demand. Therefore the EERS based on RC serve more applicable on the heavy-duty diesel engine, while it might be feasible for the light-duty vehicle gasoline engine as the state-of-the art technologies are developed in the

An analysis of beta type Stirling engine with rhombic drive mechanism

Energy Technology Data Exchange (ETDEWEB)

Shendage, D.J.; Kedare, S.B. [Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Powai, Mumbai 400 076 (India); Bapat, S.L. [Department of Mechanical Engineering, Indian Institute of Technology Bombay, Powai, Mumbai 400 076 (India)

2011-01-15

Stirling engine system is one of the options for electrifying a remote community not serviceable by the grid, which can operate on energy input in the form of heat. Major hurdle for the wide-spread usage of rhombic drive beta type Stirling engine is complexity of the drive and requirement of tight tolerances for its proper functioning. However, if the operating and geometrical constraints of the system are accounted for, different feasible design options can be identified. In the present work, various aspects that need to be considered at different decision making stages of the design and development of a Stirling engine are addressed. The proposed design methodology can generate and evaluate a range of possible design alternatives which can speed up the decision making process and also provide a clear understanding of the system design considerations. The present work is mainly about the design methodology for beta type Stirling engine and the optimization of phase angle, considering the effect of overlapping volume between compression and expansion spaces. It is also noticed that variation of compression space volume with phase angle remains sinusoidal for any phase difference. The aim of the present work is to find a feasible solution which should lead to a design of a single cylinder, beta type Stirling engine of 1.5 kW{sub e} capacity for rural electrification. (author)

Expanded R&D by Jet-engine-steering Revolution

Science.gov (United States)

Gal-Or, Benjamin

2017-11-01

Since 1987 [1,2,3,4,5] the global jet engine community is facing the historical fact that jet engine steering is gradually replacing canards and the common, often dangerous and obsolete, aerodynamic-only flight control - a fact that (i) has already affected the defense-industrial complex in the US, Russia, China, Japan, S-Korea and India, (ii) has integrated the traditional jet-engine components R&D with advanced aero-electro-physics, stealth technology, thrust vectoring aerodynamics and material science. Moreover, this military revolution is historically due to expand into the civil transport jets domain, [6,7,8,9]. The historical aim of the JES-Revolution remains the same: Replace the common, stall-spin sensitive canards [6] and Aerodynamic-Only-Obsolete-Flight Control ("AOOF Control"). Invented about 100 years ago for propeller-driven air vehicles, it has already been partially replaced for failure to function in WVR-combat post-stall domain, and for the following reasons: In comparison with complete Tail-Less, Canard-Less, Stealth-JES (Figure 5 and References [1,2,3,4,5,6]), the common AOOF Control increases drag, weight, fuel consumption, complexity, cost, and reduces flight safety, stealth, [Low Detectability] and provides zero post-stall, WVR air combat capability while its CANARDS KILL LD & REDUCE JES. Examples of stealth fighter aircraft that have already replaced canards and AOOF-Control where JES provides at least 64 to 0 KILL-RATIO advantage over AOOF-Controlled conventional fighter aircraft: The U.S. JES F-22 and, apparently, the Russian JES-Su-T-50 & 35S, China 2016-J-31, Indian HAL AMCA & FGFA, Japanese JES IHHI ATD-X, S-Korean JES KF-X. Cf. X-44 in Figure 5. Consequently, the jet engine is no longer defined as providing only brute force forward. Instead, it successfully competes with and wins over the wrong, dominating AOOF-Control, at least as a backup flight control whose sole factual domain is currently a well-established, primary flight

Productivity Improvement for Engineers.

Science.gov (United States)

1981-08-01

organization and the likely positions or types of work that will be required of the engineer in the future. There should therefore, be a balance of...Mall, P., Improving Total Productivity, John Wiley & Sons, New York, 1978. Miller, R.B., Participative Management-Quality of Worklife and Job Enrichment...Noyes Data Corp., Park Ridge, N.J., 1977. Hughes Aircraft Co., R & D Productivity-Study Report, Hughes Aircraft Co., Culver City , California, 1974

Center type performance of differentiable vector fields in R2

International Nuclear Information System (INIS)

Rabanal, Roland

2007-08-01

Let X : R 2 / D → R 2 be a differentiable vector field, where D is compact. If the eigenvalues of the jacobian matrix DX z are (nonzero) purely imaginary, for all z element of R 2 / D . Then, X + v has a center type performance at infinity, for some v element of R 2 . More precisely, X + v has a periodic trajectory Γ subset of R2/ D which is surrounding D such that in the unbounded component of (R 2 / D )/ Γ all the trajectories of X + v are nontrivial cycles. In the case of global vector fields Y : R 2 → R 2 with Y (0) = 0, we prove that such eigenvalue condition implies the topological equivalency of Y with the linear vector field (x, y) → (-y, x). (author)

Metallographic screening of grain boundary engineered type 304 austenitic stainless steel

Energy Technology Data Exchange (ETDEWEB)

Hanning, F., E-mail: Fabian.Hanning@googlemail.com; Engelberg, D.L., E-mail: Dirk.engelberg@manchester.ac.uk

2014-08-15

An electrochemical etching method for the identification of grain boundary engineered type 304 austenitic stainless steel microstructures is described. The method can be applied for rapid microstructure screening to complement electron backscatter diffraction analysis. A threshold parameter to identify grain boundary engineered microstructure is proposed, and the application of metallographic etching for characterising the degree of grain boundary engineering discussed. - Highlights: • As-received (annealed) and grain boundary engineered microstructures were compared. • Electro-chemical polarisation in nitric acid solutions was carried out. • A metallographic screening method has been developed. • The screening method complements EBSD analysis for microstructure identification.

Value engineering and the role of R and D in the neutral beam program

International Nuclear Information System (INIS)

Fink, J.

1979-01-01

Value Engineering, simply defined, is a systematic approach to getting more for your money. It has been used to reduce the cost of a wide variety of products by the D.O.D. and in principle, should be applicable to various phases of the Neutral Beam Program. With respect to R and D, the principles of Value Engineering must be used with caution. They are most effective in evaluating directed development with very specific goals, but can be misleading when considering advanced innovative work

Software engineering article types: An analysis of the literature

NARCIS (Netherlands)

Montesi, M.; Lago, P.

2008-01-01

The software engineering (SE) community has recently recognized that the field lacks well-established research paradigms and clear guidance on how to write good research reports. With no comprehensive guide to the different article types in the field, article writing and reviewing heavily depends on

Identifying small RNAs derived from maternal- and somatic-type rRNAs in zebrafish development.

Science.gov (United States)

Locati, Mauro D; Pagano, Johanna F B; Abdullah, Farah; Ensink, Wim A; van Olst, Marina; van Leeuwen, Selina; Nehrdich, Ulrike; Spaink, Herman P; Rauwerda, Han; Jonker, Martijs J; Dekker, Rob J; Breit, Timo M

2018-02-09

rRNAs are non-coding RNAs present in all prokaryotes and eukaryotes. In eukaryotes there are four rRNAs: 18S, 5.8S, 28S, originating from a common precursor (45S), and 5S. We have recently discovered the existence of two distinct developmental types of rRNA: a maternal-type, present in eggs and a somatic-type, expressed in adult tissues. Lately, next-generation sequencing has allowed the discovery of new small-RNAs deriving from longer non-coding RNAs, including small-RNAs from rRNAs (srRNAs). Here, we systemically investigated srRNAs of maternal- or somatic-type 18S, 5.8S, 28S, with small-RNAseq from many zebrafish developmental stages. We identified new srRNAs for each rRNA. For 5.8S, we found srRNA consisting of the 5' or 3' halves, with only the latter having different sequence for the maternal- and somatic-types. For 18S, we discovered 21 nt srRNA from the 5' end of the 18S rRNA with a striking resemblance to microRNAs; as it is likely processed from a stem-loop precursor and present in human and mouse Argonaute-complexed small-RNA. For 28S, an abundant 80 nt srRNA from the 3' end of the 28S rRNA was found. The expression levels during embryogenesis of these srRNA indicate they are not generated from rRNA degradation and might have a role in the zebrafish development.

Monte Carlo determinations of the functions Λ(r, Z), G(r, θ), g(R) and F(r, θ) for Amersham CDCS-M-type 137Cs source

International Nuclear Information System (INIS)

Valdez, F. Roberto Fragoso; Alvarez Romero, J. Trinidad

2001-01-01

The functions Λ(r, z), G(r, θ), g(r) and F(r, θ) were calculated for Amersham model CDCS-M-type 137 Cs source by means of Monte Carlo simulation using the algorithm PENELOPE. These functions are required to verify and/or to feed planning systems or directly as entrance data for the manual planning of the distribution of absorbed dose according with the recommendations of the TG 43, [1]. The values of the constant Λ (r, Z) were determined as the quotient of absorbed dose rate distribution in water and air kerma strength in 'free air' S k . The values obtained for Λ (r, Z) differ up to 3% of those reported in the literature, being very sensitive to the cutoff energy for the electrons in the interface of the source's encapsulated and water

19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

CERN Multimedia

Maximilien Brice

2011-01-01

19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

Linking maternal and somatic 5S rRNA types with different sequence-specific non-LTR retrotransposons.

Science.gov (United States)

Locati, Mauro D; Pagano, Johanna F B; Ensink, Wim A; van Olst, Marina; van Leeuwen, Selina; Nehrdich, Ulrike; Zhu, Kongju; Spaink, Herman P; Girard, Geneviève; Rauwerda, Han; Jonker, Martijs J; Dekker, Rob J; Breit, Timo M

2017-04-01

5S rRNA is a ribosomal core component, transcribed from many gene copies organized in genomic repeats. Some eukaryotic species have two 5S rRNA types defined by their predominant expression in oogenesis or adult tissue. Our next-generation sequencing study on zebrafish egg, embryo, and adult tissue identified maternal-type 5S rRNA that is exclusively accumulated during oogenesis, replaced throughout the embryogenesis by a somatic-type, and thus virtually absent in adult somatic tissue. The maternal-type 5S rDNA contains several thousands of gene copies on chromosome 4 in tandem repeats with small intergenic regions, whereas the somatic-type is present in only 12 gene copies on chromosome 18 with large intergenic regions. The nine-nucleotide variation between the two 5S rRNA types likely affects TFIII binding and riboprotein L5 binding, probably leading to storage of maternal-type rRNA. Remarkably, these sequence differences are located exactly at the sequence-specific target site for genome integration by the 5S rRNA-specific Mutsu retrotransposon family. Thus, we could define maternal- and somatic-type MutsuDr subfamilies. Furthermore, we identified four additional maternal-type and two new somatic-type MutsuDr subfamilies, each with their own target sequence. This target-site specificity, frequently intact maternal-type retrotransposon elements, plus specific presence of Mutsu retrotransposon RNA and piRNA in egg and adult tissue, suggest an involvement of retrotransposons in achieving the differential copy number of the two types of 5S rDNA loci. © 2017 Locati et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.

Efficient engineering of a bacteriophage genome using the type I-E CRISPR-Cas system.

Science.gov (United States)

Kiro, Ruth; Shitrit, Dror; Qimron, Udi

2014-01-01

The clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated (Cas) system has recently been used to engineer genomes of various organisms, but surprisingly, not those of bacteriophages (phages). Here we present a method to genetically engineer the Escherichia coli phage T7 using the type I-E CRISPR-Cas system. T7 phage genome is edited by homologous recombination with a DNA sequence flanked by sequences homologous to the desired location. Non-edited genomes are targeted by the CRISPR-Cas system, thus enabling isolation of the desired recombinant phages. This method broadens CRISPR Cas-based editing to phages and uses a CRISPR-Cas type other than type II. The method may be adjusted to genetically engineer any bacteriophage genome.

Economical and engineering aspects of modular-type fast reactors

International Nuclear Information System (INIS)

Kirillov, E.V.; Demidova, L.S.

1989-01-01

Economical and engineering characteristics for SAFR and PRISM modular-type reactors are analyzed on the basis of foreign papers. Dependence of economical characteristics for SAFR modules on their output is shown. Cost of power generation for the NPPs with PRISM reactor, LWR reactor and for coal thermal power plant is presented

Interdisciplinary Interactions During R&D and Early Design of Large Engineered Systems

Science.gov (United States)

McGowan, Anna-Maria Rivas

2014-01-01

Designing Large-Scale Complex Engineered Systems (LaCES) such as aircraft and submarines requires the input of thousands of engineers and scientists whose work is proximate in neither time nor space. Comprehensive knowledge of the system is dispersed among specialists whose expertise is in typically one system component or discipline. This study examined the interactive work practices among such specialists seeking to improve engineering practice through a rigorous and theoretical understanding of current practice. This research explored current interdisciplinary practices and perspectives during R&D and early LaCES design and identified why these practices and perspectives prevail and persist. The research design consisted of a three-fold, integrative approach that combined an open-ended survey, semi-structured interviews, and ethnography. Significant empirical data from experienced engineers and scientists in a large engineering organization were obtained and integrated with theories from organization science and engineering. Qualitative analysis was used to obtain a holistic, contextualized understanding. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. For example, organization culture is an important underlying factor that guided researchers more toward individual sovereignty over cross-disciplinarity. The organization structure and the engineered system architecture also serve as constraints to the engineering work. Many differences in work practices were observed, including frequency and depth of interactions, definition or co-construction of requirements, clarity or creation of the system architecture, work group proximity, and cognitive challenges. Practitioners are often unaware of these differences resulting in confusion and incorrect assumptions

Optimum value engineering and integrated design methods for reducing the cost of R-2000 houses

Energy Technology Data Exchange (ETDEWEB)

Proskiw, G. [Proskiw Engineering Ltd., Winnipeg, MB (Canada); Parekh, A. [Natural Resources Canada, Ottawa, ON (Canada)

2009-07-01

Opportunities exist to reduce the incremental cost of R-2000 construction by using optimum value engineering (OVE) and integrated design (ID) techniques. OVE is a construction philosophy in which components and systems are designed to meet their intended purposes without excessive or unnecessary use of resources. This paper summarized a study that was designed to identify opportunities for reducing the costs of R-2000 houses while improving their performance. These included detailed energy and cost analysis of various OVE/ID options which were then applied to a sample of 18 representative new home designs from British Columbia, Manitoba, and New Brunswick. The paper described the OVE/ID measures studied, cost analysis, measure utilization and energy analysis. It also included a detailed discussion of individual OVE/ID measures. Examples of some of these measures were the elimination of floor system cross-bridging; support of non-load bearing partition walls; engineered wood beams; drywall clips at corners; and non-load bearing partition walls. It was concluded that significant opportunities exist to reduce the incremental cost of R-2000 houses through careful application of OVE and ID practices. 5 refs., 4 tabs., 1 fig.

A numerical analysis on the performance of a pressurized twin power piston gamma-type Stirling engine

International Nuclear Information System (INIS)

Chen, Wen-Lih; Wong, King-Leung; Po, Li-Wen

2012-01-01

Highlights: ► A numerical model has been applied to study the performance of a gamma-type Stirling engine. ► A prototype engine has been built to correct the values of some factors in the model. ► The regeneration effectiveness is most prominent on efficiency. ► Engine speed is most effective on the engine power. ► The rotation arm and initial gas pressure are also influential factors on engine power. - Abstract: In this study, a prototype helium-changed twin-power-piston γ-type Stirling engine has been built, and some of its geometrical and operational parameters have been investigated by a numerical model. Data taken from the prototype engine have been used to correct the values of some factors in the numerical model. The results include volume and temperature variations in the expansion and compression chambers, p–v diagrams, and the effects of regeneration effectiveness, the crank radius of the power piston, the initial pressure of working gas, and the rotation speed on engine’s power and efficiency. It has been found that regeneration effectiveness poses the most prominent effect on efficiency, while engine speed is most effective on the engine power within the range of engine speed investigated in this study. This study offers invaluable guides for the design and optimization of γ-type Stirling engines with similar construction.

Сhoosing the best type neural network jet contour diagnostics engines

Directory of Open Access Journals (Sweden)

О.С. Якушенко

2006-01-01

Full Text Available  In the paper the  choice problems of neurons  type for neural network is considered. The neurons types has to be , optimal from the point of work stability, training speed and quality of gas turbine engine  technical condition class recognition by work process parameters. Results of researches are given.

Analytical expression for an optimised link bar mechanism for a beta-type Stirling engine

DEFF Research Database (Denmark)

Carlsen, Henrik; Bovin, Jonas Kabell

2007-01-01

The design of a mechanism for kinematic beta-type Stirling engines, where the displacer piston and the working piston share the same cylinder, is complicated. A well-known solution is the rhombic drive, but this solution depends on oil lubrication because of the gear wheels connecting the two...... counter rotating crank shafts. In a hermetically sealed Stirling engine it is an advantage to avoid oil in the crank case, making the application of the rhombic drive difficult. In this paper, another crank mechanism is presented, which has been developed for a 9 kW single cylinder engine. The new crank...... mechanism is a further development of the mechanism in a previous 9 kW engine. The crank mechanism for the beta-type Stirling engine is based on two four-link straight line mechanisms pointing up and down, respectively. The mechanism pointing upwards is connected to the working piston, while the mechanism...

On the dynamical vs. thermodynamical performance of a β-type Stirling engine

Science.gov (United States)

Reséndiz-Antonio, Margarita; Santillán, Moisés

2014-09-01

In this work we present a simple mathematical model for a β-type Stirling engine. Despite its simplicity, the model considers all the engine’s relevant thermodynamic and mechanical aspects. The dynamic behavior of the model equation of motion is analyzed in order to obtain the sufficient conditions for engine cycling and to study the stability of the stationary regime. The performance of the engine’s thermodynamic part is also investigated. As a matter of fact, we found that it corresponds to a Carnot engine.

Method for suppressing aliasing artifacts in R/R-type CT

International Nuclear Information System (INIS)

Mori, Issei; Igarashi, Narumi; Kazama, Masahiro; Taguchi, Katsuyuki

2003-01-01

The Quarter-Quarter (QQ) offset method is a well-established technique for suppressing aliasing artifacts in R/R-type CT. However, the perfect alignment required for the QQ offset is generally difficult to achieve in practice. Depending on the scanner design, it may even be impossible to achieve. Because of this imperfection, the images contain some aliasing artifacts. This problem is becoming more serious with the spread of multislice CT and the increasingly common use of thin-slice imaging, in which aliasing is inherently stronger. We propose a simple method that suppresses such aliasing artifacts effectively while minimizing degradation in the spatial resolution. We exploit the fact that the frequency transfer functions are different for the main spectrum and the aliasing spectrum when the back-projection offset is not identical to the sampling offset. The selection of an appropriate back-projection offset results in an effective notch filter against the aliasing spectrum and a wide-band filter for the main spectrum. The results of simulation experiments support our theory, and experiments using an actual machine have shown that the image quality obtained by our method is comparable to that of perfect QQ even when the QQ alignment conditions are severely violated. (author)

Study of the scientific reasoning methods: Identifying the salient reasoning characteristics exhibited by engineers and scientists in an R&D environment

Science.gov (United States)

Kuhn, William F.

At the core of what it means to be a scientist or engineer is the ability to think rationally using scientific reasoning methods. Yet, typically if asked, scientist and engineers are hard press for a reply what that means. Some may argue that the meaning of scientific reasoning methods is a topic for the philosophers and psychologist, but this study believes and will prove that the answers lie with the scientists and engineers, for who really know the workings of the scientific reasoning thought process than they. This study will provide evidence to the aims: (a) determine the fundamental characteristics of cognitive reasoning methods exhibited by engineer/scientists working in R&D projects, (b) sample the engineer/scientist community to determine their views as to the importance, frequency, and ranking of each of characteristics towards benefiting their R&D projects, (c) make concluding remarks regarding any identified competency gaps in the exhibited or expected cognitive reasoning methods of engineer/scientists working on R&D projects. To drive these aims are the following three research questions. The first, what are the salient characteristics of cognitive reasoning methods exhibited by engineer/scientists in an R&D environment? The second, what do engineer/scientists consider to be the frequency and importance of the salient cognitive reasoning methods characteristics? And the third, to what extent, if at all, do patent holders and technical fellows differ with regard to their perceptions of the importance and frequency of the salient cognitive reasoning characteristics of engineer/scientists? The methodology and empirical approach utilized and described: (a) literature search, (b) Delphi technique composed of seven highly distinguish engineer/scientists, (c) survey instrument directed to distinguish Technical Fellowship, (d) data collection analysis. The results provide by Delphi Team answered the first research question. The collaborative effort validated

Knock-Limited Performance of Triptane and 28-R Fuel Blends as Affected by Changes in Compression Ratio and in Engine Operating Variables

Science.gov (United States)

Brun, Rinaldo J.; Feder, Melvin S.; Fisher, William F.

1947-01-01

A knock-limited performance investigation was conducted on blends of triptane and 28-P fuel with a 12-cylinder, V-type, liquid-cooled aircraft engine of 1710-cubic-inch displacement at three compression ratios: 6.65, 7.93, and 9.68. At each compression ratio, the effect of changes in temperature of the inlet air to the auxiliary-stage supercharger and in fuel-air ratio were investigated at engine speeds of 2280 and. 3000 rpm. The results show that knock-limited engine performance, as improved by the use of triptane, allowed operation at both take-off and cruising power at a compression ratio of 9.68. At an inlet-air temperature of 60 deg F, an engine speed of 3000 rpm ; and a fuel-air ratio of 0,095 (approximately take-off conditions), a knock-limited engine output of 1500 brake horsepower was possible with 100-percent 28-R fuel at a compression ratio of 6.65; 20-percent triptane was required for the same power output at a compression ratio of 7.93, and 75 percent at a compression ratio of 9.68 allowed an output of 1480 brake horsepower. Knock-limited power output was more sensitive to changes in fuel-air ratio as the engine speed was increased from 2280 to 3000 rpm, as the compression ratio is raised from 6.65 to 9.68, or as the inlet-air temperature is raised from 0 deg to 120 deg F.

CASTOR(r) and CONSTOR(r) type transport and storage casks for spent fuel and high active waste

International Nuclear Information System (INIS)

Kuehne, B.; Sowa, W.

2002-01-01

The German company GNB has developed, tested, licensed, fabricated, loaded, transported and stored a large number of casks for spent fuel and high-level waste. CASTOR(r) casks are used at 18 sites on three continents. Spent fuel assemblies of the types PWR, BWR, VVER, RBMK, MTR and THTR as well as vitrified high active waste (HAW) containers are stored in these kinds of casks. More than 600 CASTOR(r) casks have been loaded for long-term storage. The two decades of storage have shown that the basic requirements, which are safe confinement, criticality safety, sufficient shielding and appropriate heat transfer have been fulfilled in each case. There is no indication that problems will arise in the future. Of course, the experience of 20 years has resulted in improvements of the cask design. One basic improvement is GNB's development since the mid 1990s of a sandwich cask design using heavy concrete and steel as basic materials, for economical and technical reasons. This CONSTOR(r) cask concept also fulfils all design criteria for transport and storage given by the IAEA recommendations and national authorities. By May 2002 40 CONSTOR(r) casks had been delivered and 15 had been successfully loaded and stored. In this paper the different types of casks are presented. Experiences gained during the large number of cask loadings and more than 4000 cask-years of storage will be summarised. The presentation of recent and future development shows the optimisation potential of the CASTOR(r) and CONSTOR(r) cask families for safe and economical management of spent fuel. (author)

Engineering MerR for Sequestration and MerA for Reduction of Toxic Metals and Radionuclides

International Nuclear Information System (INIS)

Summers, Anne O.

2008-01-01

The objectives of this project were (1) to alter a metalloregulatory protein (MerR) so that it would bind other toxic metals or radionuclides with similar affinity so that the engineered protein itself and/or bacteria expressing it could be deployed in the environment to specifically sequester such metals and (2) to alter the mercuric reductase, MerA, to reduce radionuclides and render them less mobile. Both projects had a basic science component. In the first case, such information about MerR illuminates how proteins discriminate very similar metals/elements. In the second case, information about MerA reveals the criteria for transmission of reducing equivalents from NADPH to redox-active metals. The work involved genetic engineering of all or parts of both proteins and examination of their resultant properties both in vivo and in vitro, the latter with biochemical and biophysical tools including equilibrium and non-equilibrium dialysis, XAFS, NMR, x-ray crystallography, and titration calorimetry. We defined the basis for metal specificity in MerR, devised a bacterial strain that sequesters Hg while growing, characterized gold reduction by MerA and the role of the metallochaperone domain of MerA, and determined the 3-D structure of MerB, the organomercurial lyase.

Effects of exhaust gas recirculation in diesel engines featuring late PCCI type combustion strategies

International Nuclear Information System (INIS)

D’Ambrosio, S.; Ferrari, A.

2015-01-01

Highlights: • The effects that a high EGR rate can have on PCCI type combustion strategies have been analyzed. • The dependence of engine emissions and combustion noise on EGR has been addressed. • The time histories of the main in-cylinder variables have been plotted for different EGR rates. - Abstract: The influence of exhaust gas recirculation (EGR) has been analyzed considering experimental results obtained from a Euro 5 diesel engine calibrated with an optimized pilot-main double injection strategy. The engine features a late premixed charge compression ignition (PCCI) type combustion mode. Different steady-state key-points that are representative of the engine application in a passenger car over the New European Driving Cycle (NEDC) have been studied. The engine was fully instrumented to obtain a complete overview of the most important variables. The pressure time history in the combustion chamber has been measured to perform calculations with single and three-zone combustion diagnostic models. These models allow the in-cylinder emissions and the temperature of the burned and unburned zones to be evaluated as functions of the crankshaft angle. The EGR mass fraction was experimentally varied within the 0–50% range. The results of the investigation have shown the influence that high EGR rates can have on intake and exhaust temperatures, in-cylinder pressure and heat release rate time histories, engine-out emissions (CO, HC, NO_x, soot), brake specific fuel consumption and combustion noise for a PCCI type combustion strategy. The outputs of the diagnostic models have been used to conduct a detailed analysis of the cause-and-effect relationships between the EGR rate variations and the engine performance. Finally, the effect of the EGR on the cycle-to-cycle variability of the engine torque has been experimentally investigated.

Factors of airplane engine performance

Science.gov (United States)

Gage, Victor R

1921-01-01

This report is based upon an analysis of a large number of airplane-engine tests. It contains the results of a search for fundamental relations between many variables of engine operation. The data used came from over 100 groups of tests made upon several engines, primarily for military information. The types of engines were the Liberty 12 and three models of the Hispano-Suiza. The tests were made in the altitude chamber, where conditions simulated altitudes up to about 30,000 feet, with engine speeds ranging from 1,200 to 2,200 r.p.m. The compression ratios of the different engines ranged from under 5 to over 8 to 1. The data taken on the tests were exceptionally complete, including variations of pressure and temperature, besides the brake and friction torques, rates of fuel and air consumption, the jacket and exhaust heat losses.

Bianchi type-I universe in f(R, T) modified gravity with quark matter and Λ

Science.gov (United States)

Ćaǧlar, Halife; Aygün, Sezgin

2017-02-01

In this study, we investigate homogeneous and anisotropic Bianchi type I universe in the presence of quark matter source in f(R, T) gravity (Harko et al. in Phys. Rev. D 84:024020, 2011) with cosmological constant Λ (where R is the Ricci scalar and T is the trace of the energy momentum tensor). For this aim we have used the anisotropy feature of Bianchi type I universe and equation of states (EoS) of quark matter. We explore the exact solution f(R,T)=R+2f(T) model for Bianchi type I universe model. When t→∞, we get very small cosmological constant value, this result agrees with recent observations.

Unexpected dependence of RyR1 splice variant expression in human lower limb muscles on fiber-type composition.

Science.gov (United States)

Willemse, Hermia; Theodoratos, Angelo; Smith, Paul N; Dulhunty, Angela F

2016-02-01

The skeletal muscle ryanodine receptor Ca(2+) release channel (RyR1), essential for excitation-contraction (EC) coupling, demonstrates a known developmentally regulated alternative splicing in the ASI region. We now find unexpectedly that the expression of the splice variants is closely related to fiber type in adult human lower limb muscles. We examined the distribution of myosin heavy chain isoforms and ASI splice variants in gluteus minimus, gluteus medius and vastus medialis from patients aged 45 to 85 years. There was a strong positive correlation between ASI(+)RyR1 and the percentage of type 2 fibers in the muscles (r = 0.725), and a correspondingly strong negative correlation between the percentages of ASI(+)RyR1 and percentage of type 1 fibers. When the type 2 fiber data were separated into type 2X and type 2A, the correlation with ASI(+)RyR1 was stronger in type 2X fibers (r = 0.781) than in type 2A fibers (r = 0.461). There was no significant correlation between age and either fiber-type composition or ASI(+)RyR1/ASI(-)RyR1 ratio. The results suggest that the reduced expression of ASI(-)RyR1 during development may reflect a reduction in type 1 fibers during development. Preferential expression of ASI(-) RyR1, having a higher gain of in Ca(2+) release during EC coupling than ASI(+)RyR1, may compensate for the reduced terminal cisternae volume, fewer junctional contacts and reduced charge movement in type 1 fibers.

The two ∇6R4 type invariants and their higher order generalisation

International Nuclear Information System (INIS)

Bossard, Guillaume; Verschinin, Valentin

2015-01-01

We show that there are two distinct classes of ∇ 6 R 4 type supersymmetry invariants in maximal supergravity. The second class includes a coupling in F 2 ∇ 4 R 4 that generalises to 1/8 BPS protected F 2k ∇ 4 R 4 couplings. We work out the supersymmetry constraints on the corresponding threshold functions, and argue that the functions in the second class satisfy to homogeneous differential equations for arbitrary k≥1, such that the corresponding exact threshold functions in type II string theory should be proportional to Eisenstein series, which we identify. This analysis explains in particular that the exact ∇ 6 R 4 threshold function is the sum of an Eisenstein function and a solution to an inhomogeneous Poisson equation in string theory.

The antecedents of new R&D collaborations with different partner types: On the dynamics of past R&D collaboration and innovative performance

NARCIS (Netherlands)

Belderbos, René; Gilsing, Victor; Lokshin, Boris; Carree, Martin; Sastre, Juan Fernández

2017-01-01

We examine firms' propensity to adapt their R&D collaboration portfolio by establishing new types of R&D collaboration with different kinds of partners (suppliers, customers, competitors and universities & public research institutions). We argue that existing R&D collaboration with one of the two

Molecular organization of the 5S rDNA gene type II in elasmobranchs.

Science.gov (United States)

Castro, Sergio I; Hleap, Jose S; Cárdenas, Heiber; Blouin, Christian

2016-01-01

The 5S rDNA gene is a non-coding RNA that can be found in 2 copies (type I and type II) in bony and cartilaginous fish. Previous studies have pointed out that type II gene is a paralog derived from type I. We analyzed the molecular organization of 5S rDNA type II in elasmobranchs. Although the structure of the 5S rDNA is supposed to be highly conserved, our results show that the secondary structure in this group possesses some variability and is different than the consensus secondary structure. One of these differences in Selachii is an internal loop at nucleotides 7 and 112. These mutations observed in the transcribed region suggest an independent origin of the gene among Batoids and Selachii. All promoters were highly conserved with the exception of BoxA, possibly due to its affinity to polymerase III. This latter enzyme recognizes a dT4 sequence as stop signal, however in Rajiformes this signal was doubled in length to dT8. This could be an adaptation toward a higher efficiency in the termination process. Our results suggest that there is no TATA box in elasmobranchs in the NTS region. We also provide some evidence suggesting that the complexity of the microsatellites present in the NTS region play an important role in the 5S rRNA gene since it is significantly correlated with the length of the NTS.

Nuclear engineering R ampersand D at the Savannah River Site

International Nuclear Information System (INIS)

Strosnider, D.R.; Ferrara, W.R.

1991-01-01

The Westinghouse Savannah River Company (WSRC) is the prime operating contractor for the US Department of Energy at the Savannah River Site (SRS), located near Aiken, South Carolina. One division of WSRC, the Savannah River Laboratory (SRL), has the primary responsibility for research and development, which includes supporting the safe and efficient operation of the SRS production reactors. Several Sections of SRL, as well as other organization in WSRC, pursue R ampersand D and oversight activities related to nuclear engineering. The Sections listed below are described in more detail in this document: (SRL) nuclear reactor technology and scientific computations department; (SRL) safety analysis and risk management department; (WSRC) new production reactor program; and (WSRC) environment, safety, health, and quality assurance division

Design type air engine Di Pietro

Directory of Open Access Journals (Sweden)

Zwierzchowski Jaroslaw

2017-01-01

Full Text Available The article presents a pneumatic engine constructed by Angelo Di Pietro. 3D solid models of pneumatic engine components were presented therein. A directional valve is a key element of the control system. The valve functions as a camshaft distributing air to particular engine chambers. The construction designed by Angelo Di Pietro is modern and innovative. A pneumatic engine requires low pressure to start rotary movement. With the use of CFD software, the fields of velocity vectors’ distribution were determined. Moreover, the author determined the distribution of pressure values in engine inlet and outlet channels. CFD model studies on engine operation were conducted for chosen stages of operating cycles. On the basis of simulation tests that were conducted, the values of flow rates for the engine were determined. The distribution of pressure values made it possible to evaluate the torque value on the rotating shaft.

Design type air engine Di Pietro

Science.gov (United States)

Zwierzchowski, Jaroslaw

The article presents a pneumatic engine constructed by Angelo Di Pietro. 3D solid models of pneumatic engine components were presented therein. A directional valve is a key element of the control system. The valve functions as a camshaft distributing air to particular engine chambers. The construction designed by Angelo Di Pietro is modern and innovative. A pneumatic engine requires low pressure to start rotary movement. With the use of CFD software, the fields of velocity vectors' distribution were determined. Moreover, the author determined the distribution of pressure values in engine inlet and outlet channels. CFD model studies on engine operation were conducted for chosen stages of operating cycles. On the basis of simulation tests that were conducted, the values of flow rates for the engine were determined. The distribution of pressure values made it possible to evaluate the torque value on the rotating shaft.

Multimedia Search Engines : Concept, Performance, and Types

OpenAIRE

Sayed Rabeh Sayed

2005-01-01

A Research about multimedia search engines, it starts with definition of search engines at general and multimedia search engines, then explains how they work, and divided them into: Video search engines, Images search engines, and Audio search engines. Finally, it reviews a samples to multimedia search engines.

A Framework of Working Across Disciplines in Early Design and R&D of Large Complex Engineered Systems

Science.gov (United States)

McGowan, Anna-Maria Rivas; Papalambros, Panos Y.; Baker, Wayne E.

2015-01-01

This paper examines four primary methods of working across disciplines during R&D and early design of large-scale complex engineered systems such as aerospace systems. A conceptualized framework, called the Combining System Elements framework, is presented to delineate several aspects of cross-discipline and system integration practice. The framework is derived from a theoretical and empirical analysis of current work practices in actual operational settings and is informed by theories from organization science and engineering. The explanatory framework may be used by teams to clarify assumptions and associated work practices, which may reduce ambiguity in understanding diverse approaches to early systems research, development and design. The framework also highlights that very different engineering results may be obtained depending on work practices, even when the goals for the engineered system are the same.

The performance simulation of single cylinder electric power confined piston engine

Science.gov (United States)

Gou, Yanan

2017-04-01

A new type of power plant. i.e, Electric Power Confined Piston Engine, is invented by combining the free piston engine and the crank connecting rod mechanism of the traditional internal combustion engine. Directly using the reciprocating movement of the piston, this new engine converts the heat energy produced by fuel to electrical energy and output it. The paper expounds the working mechanism of ECPE and establishes the kinematics and dynamics equations. Furthermore, by using the analytic method, the ECPE electromagnetic force is solved at load cases. Finally, in the simulation environment of MARLAB, the universal characteristic curve is obtained in the condition of rotational speed n between 1000 r/min and 2400 r/min, throttle opening α between 30% and 100%.

One Generation of New Material, One Generation of New Type Engine:Development Trend of Aero-engine and Its Requirements for Materials

Directory of Open Access Journals (Sweden)

LIU Da-xiang

2017-10-01

Full Text Available Based on the brief review of accelerated developing status of aircraft power technology in the world, the present status and developing trend of key materials technology for aero-engine were analyzed. In accordance with the idea of "one generation of new material, one generation of new type engine", development requirements for the materials technology of the system and main parts of aero-engine were proposed. Suggestions for improving development and application level of the materials technology in China were presented from aspects of quality stability and technical maturity, investigation and verification for engineering, materials system and data, composite materials, airworthiness certificate,etc.

Open the `black box' creativity and innovation: a study of activities in R&D departments. Some prospects for engineering education

Science.gov (United States)

Millet, Charlyne; Oget, David; Cavallucci, Denis

2017-11-01

Innovation is a key component to the success and longevity of companies. Our research opens the 'black box' of creativity and innovation in R&D teams. We argue that understanding the nature of R&D projects in terms of creativity/innovation, efficiency/inefficiency, is important for designing education policies and improving engineering curriculum. Our research addresses the inventive design process, a lesser known aspect of the innovation process, in 197 R&D departments of industrial sector companies in France. One fundamental issue facing companies is to evaluate processes and results of innovation. Results show that the evaluation of innovation is confined by a lack of methodology of inventive projects. We will be establishing the foundations of a formal ontology for inventive design projects and finally some recommendations for engineering education.

Two-phase screw-type engine - problems of the filling process; Zweiphasen-Schraubenmotor - Probleme des Fuellungsvorganges

Energy Technology Data Exchange (ETDEWEB)

Kauder, K.; Kliem, B. [Dortmund Univ. (Germany). FG Fluidenergiemaschinen

1998-12-31

The two-phase screw-type engine presents itself as a expansion engine in a trilateral-flash-cycle to use waste heat in the lower temperature range, because this displacement engine is able to expand working fluids with a high proportion of liquid. Due to the low critical velocity and the blocking flow, the two-phase flow in the inlet port of the screw-type engine has a great influence on the quality of energy transformation. A novel filling system with rotating short nozzles is presented. Less dissipation during the filling process is expected by this system, because the flash evaporation of the fluid will occur in the working chamber and not in the inlet port of the screw-type engine. (orig.) [Deutsch] Der Zweiphasen-Schraubenmotor besitzt als Expansionsmaschine in Trilateral-Flash-Cycle-Prozessen zur Nutzung von Abwaerme mit niedriger Temperatur deutliche Vorteile, da dieser Maschinentyp in der Lage ist, Arbeitsfluide mit einem hohen Fluessigkeitsanteil zu expandieren. Die Zweiphasenstroemung im Einlassbereich des Schraubenmotors hat aufgrund ihrer geringen kritischen Geschwindigkeit und der damit verbundenen blockierten Stroemung einen signifikanten Einfluss auf die Fuellung der Arbeitskammer und der Energiewandlungsguete des Motors. Ein hier vorgestelltes neuartiges Fuellungssystem mit rotierenden Kurzduesen laesst eine verbesserte Fuellung des Zweiphasen-Schraubenmotors erwarten, da es erst in den Arbeitskammern zur Flashverdampfung kommt. (orig.)

A common central engine for long gamma-ray bursts and Type Ib/c supernovae

Science.gov (United States)

Sobacchi, E.; Granot, J.; Bromberg, O.; Sormani, M. C.

2017-11-01

Long-duration, spectrally soft gamma-ray bursts (GRBs) are associated with Type Ic core collapse (CC) supernovae (SNe), and thus arise from the death of massive stars. In the collapsar model, the jet launched by the central engine must bore its way out of the progenitor star before it can produce a GRB. Most of these jets do not break out, and are instead 'choked' inside the star, as the central engine activity time, te, is not long enough. Modelling the long-soft GRB duration distribution assuming a power-law distribution for their central engine activity times, ∝ t_e^{-α } for te > tb, we find a steep distribution (α ∼ 4) and a typical GRB jet breakout time of tb ∼ 60s in the star's frame. The latter suggests the presence of a low-density, extended envelope surrounding the progenitor star, similar to that previously inferred for low-luminosity GRBs. Extrapolating the range of validity of this power law below what is directly observable, to te < tb, by only a factor of ∼4-5 produces enough events to account for all Type Ib/c SNe. Such extrapolation is necessary to avoid fine-tuning the distribution of central engine activity times with the breakout time, which are presumably unrelated. We speculate that central engines launching relativistic jets may operate in all Type Ib/c SNe. In this case, the existence of a common central engine would imply that (i) the jet may significantly contribute to the energy of the SN; (ii) various observational signatures, like the asphericity of the explosion, could be directly related to jet's interaction with the star.

Advanced Engine/Aftertreatment System R&D

Energy Technology Data Exchange (ETDEWEB)

Pihl, J.; West, B.; Toops, T.; Adelman, B. (Navistar, Inc.); Derybowski, E. (Navistar, Inc.)

2011-09-30

Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT, also known as NOx adsorber catalyst) regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focused on in-exhaust fuel injection. ORNL developed a PC-based controller for transient electronic control of EGR valve position, intake throttle position, and actuation of fuel injectors in the exhaust system of a Navistar engine installed at Oak Ridge. Aftertreatment systems consisting of different diesel oxidation catalysts (DOCs) in conjunction with a diesel particle filter and LNT were evaluated under quasi-steady-state conditions. Hydrocarbon (HC) species were measured at multiple locations in the exhaust system with Gas chromatograph mass spectrometry (GC-MS) and Fourier transform infrared (FTIR) spectroscopy.

Taguchi Method for Investigating the Performance Parameters and Exergy of a Diesel Engine Using Four Types of Diesel Fuels

Directory of Open Access Journals (Sweden)

Dara K. Khidir

2016-05-01

Full Text Available The effects of changes in engine operating parameters, i.e., engine speed, throttle and water temperature, for four types of diesel fuel (A, B, C and D of different specific gravities, as supplied from local market and refineries, were studied and simultaneously optimized. The experiment design was based on Taguchi’s “L' 16” orthogonal table, and the engine was put to test at different engine speeds, throttling opening percentages and water temperatures, using different fuels. The data were analyzed using S/N (signal to noise ratio for each factor. The obtained results show that the optimum operating conditions for minimum BSFC (brake specific fuel consumption are achieved when the engine speed is 2500 rpm, the throttle is placed at 75% of full throttling, the water temperature is 80 oC and the engine is using fuel type D. Also, results of S/N ratio reveal that the throttle has significant influence on brake thermal and exergic efficiencies. Water temperature is the second most effective factor and then comes the influence of engine speed. The least effective factor among the studied parameters for the types of fuel considered in this experiment is the fuel type.

Sticktechnologie für medizinische Textilien und Tissue Engineering

Science.gov (United States)

Karamuk, Erdal; Mayer, Jörg; Wintermantel, Erich

Textile Strukturen werden in grossem Ausmass als medizinische Implantate eingesetzt, um Weich- und Hartgewebe zu unterstützen oder zu ersetzen. Im Tissue Engineering gewinnen sie an Bedeutung als scaffolds, um biologische Gewebe in vitro zu züchten für anschliessende Implantation oder extrakorporale Anwendungen. Textilien sind gewöhnlich anisotrope zweidimensionale Strukturen mit hoher Steifigkeit in der Ebene und geringer Biegesteifigkeit. Durch eine Vielzahl textiler Prozesse und durch entsprechende Wahl des Fasermaterials ist es möglich, Oberfläche, Porosität und mechanische Anisotropie in hohem Masse zu variieren. Wegen ihrer einzigartigen strukturellen und mechanischen Eigenschaften können faserbasierte Materialien in weitem Masse biologischem Gewebe nachgeahmt werden [1]. Gesticke erweitern das Feld von technischen und besonders medizinischen Textilien, denn sie vereinen sehr hohe strukturelle Variabilität mit der Möglichkeit, mechanische Eigenschaften in einem grossen Bereich einzustellen, um so die mechanischen Anforderungen des Empfängergewebes zu erfüllen (Abb. 42.1).

Angiotensin type 2 receptor (AT2R) and receptor Mas

DEFF Research Database (Denmark)

Villela, Daniel; Leonhardt, Julia; Patel, Neal

2015-01-01

The angiotensin type 2 receptor (AT2R) and the receptor Mas are components of the protective arms of the renin-angiotensin system (RAS), i.e. they both mediate tissue protective and regenerative actions. The spectrum of actions of these two receptors and their signalling mechanisms display striki...

Ectopic Expression of the Coleus R2R3 MYB-Type Proanthocyanidin Regulator Gene SsMYB3 Alters the Flower Color in Transgenic Tobacco.

Directory of Open Access Journals (Sweden)

Qinlong Zhu

Full Text Available Proanthocyanidins (PAs play an important role in plant disease defense and have beneficial effects on human health. We isolated and characterized a novel R2R3 MYB-type PA-regulator SsMYB3 from a well-known ornamental plant, coleus (Solenostemon scutellarioides, to study the molecular regulation of PAs and to engineer PAs biosynthesis. The expression level of SsMYB3 was correlated with condensed tannins contents in various coleus tissues and was induced by wounding and light. A complementation test in the Arabidopsis tt2 mutant showed that SsMYB3 could restore the PA-deficient seed coat phenotype and activated expression of the PA-specific gene ANR and two related genes, DFR and ANS. In yeast two-hybrid assays, SsMYB3 interacted with the Arabidopsis AtTT8 and AtTTG1 to reform the ternary transcriptional complex, and also interacted with two tobacco bHLH proteins (NtAn1a and NtJAF13-1 and a WD40 protein, NtAn11-1. Ectopic overexpression of SsMYB3 in transgenic tobacco led to almost-white flowers by greatly reducing anthocyanin levels and enhancing accumulation of condensed tannins. This overexpression of SsMYB3 upregulated the key PA genes (NtLAR and NtANR and late anthocyanin structural genes (NtDFR and NtANS, but downregulated the expression of the final anthocyanin gene NtUFGT. The formative SsMYB3-complex represses anthocyanin accumulation by directly suppressing the expression of the final anthocyanin structural gene NtUFGT, through competitive inhibition or destabilization of the endogenous NtAn2-complex formation. These results suggested that SsMYB3 may form a transcription activation complex to regulate PA biosynthesis in the Arabidopsis tt2 mutant and transgenic tobacco. Our findings suggest that SsMYB3 is involved in the regulation of PA biosynthesis in coleus and has the potential as a molecular tool for manipulating biosynthesis of PAs in fruits and other crops using metabolic engineering.

Spread of carbapenem-resistant Acinetobacter baumannii global clone 2 in Asia and AbaR-type resistance islands.

Science.gov (United States)

Kim, Dae Hun; Choi, Ji-Young; Kim, Hae Won; Kim, So Hyun; Chung, Doo Ryeon; Peck, Kyong Ran; Thamlikitkul, Visanu; So, Thomas Man-Kit; Yasin, Rohani M D; Hsueh, Po-Ren; Carlos, Celia C; Hsu, Li Yang; Buntaran, Latre; Lalitha, M K; Song, Jae-Hoon; Ko, Kwan Soo

2013-11-01

In this surveillance study, we identified the genotypes, carbapenem resistance determinants, and structural variations of AbaR-type resistance islands among carbapenem-resistant Acinetobacter baumannii (CRAB) isolates from nine Asian locales. Clonal complex 92 (CC92), corresponding to global clone 2 (GC2), was the most prevalent in most Asian locales (83/108 isolates; 76.9%). CC108, or GC1, was a predominant clone in India. OXA-23 oxacillinase was detected in CRAB isolates from most Asian locales except Taiwan. blaOXA-24 was found in CRAB isolates from Taiwan. AbaR4-type resistance islands, which were divided into six subtypes, were identified in most CRAB isolates investigated. Five isolates from India, Malaysia, Singapore, and Hong Kong contained AbaR3-type resistance islands. Of these, three isolates harbored both AbaR3- and AbaR4-type resistance islands simultaneously. In this study, GC2 was revealed as a prevalent clone in most Asian locales, with the AbaR4-type resistance island predominant, with diverse variants. The significance of this study lies in identifying the spread of global clones of carbapenem-resistant A. baumannii in Asia.

R and D activities on CANDU-type fuel in Indonesia

International Nuclear Information System (INIS)

Suripto, A.; Badruzzaman, M.; Latief, A.

1997-01-01

The status of R and D activities in Indonesia with respect of CANDU-type fuel development is presented. The activities have been started since the first feasibility study to introduce nuclear power plants was carried out in 1970s. The early research comprised the in-situ pilot production of yellow-cake in Kalimantan (Borneo) experimental mining site, uranium purification and pellet preparation. This program continued to gain a full support from the Government which culminated in the realisation of the construction by BATAN of a large fuel development laboratory in Serpong, starting from 1984 in co-operation with NIRA Ansaldo of Italy. The laboratory, which is called the Power Reactor Experimental Fuel Element Installation (EFEI) was originally designed as an experimental facility to integrate the acquired domestic R and D results gained so far on the CANDU-type fuel technology and the additional know-how received from NIRA Ansaldo which at that time was engaged, in developing a CANDU-type fuel, called the CIRENE fuel design. In the present days the facility houses the power reactor fuel development activities carried out to build up the national capability on power reactor fuel fabrication technology in anticipation to embark upon the nuclear energy era in the near future. (author)

Impact of Fuel Type on the Internal Combustion Engine Condition

Directory of Open Access Journals (Sweden)

Zdravko Schauperl

2012-07-01

Full Text Available The paper studies the influence of liquefied petroleum gas as alternative fuel on the condition of the internal combustion engine. The traffic, energy, economic and ecological influence as well as the types of fuel are studied and analyzed in an unbiased manner, objectively, and in detail, and the obtained results are compared with the condition of the engine of a vehicle powered by the stipulated fuel, petrol Eurosuper 95. The study was carried out on two identical passenger cars with one being fitted with gas installation. The obtained results show that properly installed gas installations in vehicles and the usage of LPG have no significant influence on the driving performances, but they affect significantly the ecological and economic parameters of using passenger cars.

Characterization of TsaR, an Oxygen-Sensitive LysR-Type Regulator for the Degradation of p-Toluenesulfonate in Comamonas testosteroni T-2

OpenAIRE

Tralau, Tewes; Mampel, Jörg; Cook, Alasdair M.; Ruff, Jürgen

2003-01-01

TsaR is the putative LysR-type regulator of the tsa operon (tsaMBCD) which encodes the first steps in the degradation of p-toluenesulfonate (TSA) in Comamonas testosteroni T-2. Transposon mutagenesis was used to knock out tsaR. The resulting mutant lacked the ability to grow with TSA and p-toluenecarboxylate (TCA). Reintroduction of tsaR in trans on an expression vector reconstituted growth with TSA and TCA. The tsaR gene was cloned into Escherichia coli with a C-terminal His tag and overexpr...

Origin and type of flaws in heat engine ceramic materials and components

International Nuclear Information System (INIS)

Govila, R.K.

1995-01-01

A number of ceramic materials such as Silicon Nitrides and Carbides, Sialons, Whisker-Reinforced Ceramic Composites and Partially-Stabilized Zirconias (PSZs) have been developed for use as structural components in heat engine applications. The reliability and durability of a structural engine component is critically dependent on the size, density of distribution and location of flaws. This information is critical for the processing and design engineers in order to design structural components using suitable materials and thus minimize stress intensity. In general, the failure initiating flaws are associated or produced due to material impurity, processing methods and parameters, and fabrication techniques (machining and grinding). Examples of each type of flaws associated with material impurity, processing methods and fabrication techniques are illustrated

Experimental characterization of a small custom-built double-acting gamma-type stirling engine

Science.gov (United States)

Intsiful, Peter; Mensah, Francis; Thorpe, Arthur

This paper investigates characterization of a small custom-built double-acting gamma-type stirling engine. Stirling-cycle engine is a reciprocating energy conversion machine with working spaces operating under conditions of oscillating pressure and flow. These conditions may be due to compressibility as wells as pressure and temperature fluctuations. In standard literature, research indicates that there is lack of basic physics to account for the transport phenomena that manifest themselves in the working spaces of reciprocating engines. Previous techniques involve governing equations: mass, momentum and energy. Some authors use engineering thermodynamics. None of these approaches addresses this particular engine. A technique for observing and analyzing the behavior of this engine via parametric spectral profiles has been developed, using laser beams. These profiles enabled the generation of pv-curves and other trajectories for investigating the thermos-physical and thermos-hydrodynamic phenomena that manifest in the exchangers. The engine's performance was examined. The results indicate that with current load of 35.78A, electric power of 0.505 kW was generated at a speed of 240 rpm and 29.50 percent efficiency was obtained. Nasa grants to Howard University NASA/HBCU-NHRETU & CSTEA.

Leucocontextins A-R, lanostane-type triterpenoids from Ganoderma leucocontextum.

Science.gov (United States)

Zhao, Zhen-Zhu; Chen, He-Ping; Li, Zheng-Hui; Dong, Ze-Jun; Bai, Xue; Zhou, Zhong-Yu; Feng, Tao; Liu, Ji-Kai

2016-03-01

Eighteen new lanostane-type triterpenoids, namely leucocontextins A-R (1-18) were isolated from the fruiting bodies of Ganoderma leucocontextum. Their structures were established by 1D and 2D NMR data in conjunction with HRESIMS/HREIMS, X-ray single crystal diffraction analysis. Compound 18 exhibited weak cytotoxicity against K562 and MCF-7 cell lines with IC50 of 20-30 μM. Copyright © 2015 Elsevier B.V. All rights reserved.

Differential equation analysis in biomedical science and engineering ordinary differential equation applications with R

CERN Document Server

Schiesser, William E

2014-01-01

Features a solid foundation of mathematical and computational tools to formulate and solve real-world ODE problems across various fields With a step-by-step approach to solving ordinary differential equations (ODEs), Differential Equation Analysis in Biomedical Science and Engineering: Ordinary Differential Equation Applications with R successfully applies computational techniques for solving real-worldODE problems that are found in a variety of fields, including chemistry, physics, biology,and physiology. The book provides readers with the necessary knowledge to reproduce andextend the comp

Rapid Response Command and Control (R2C2): a systems engineering analysis of scaleable communications for Regional Combatant Commanders

OpenAIRE

Sullivan, Lisa; Cannon, Lennard; Reyes, Ronel; Bae, Kitan; Colgary, James; Minerowicz, Nick; Leong, Chris; Lim, Harry; Lim, Hang Sheng; Ng, Chin Chin; Neo, Tiong Tien; Tan, Guan Chye; Ng, Yu Loon; Wong, Eric; Wong, Heng Yue

2006-01-01

Includes supplementary material. Disaster relief operations, such as the 2005 Tsunami and Hurricane Katrina, and wartime operations, such as Operation Enduring Freedom and Operation Iraqi Freedom, have identified the need for a standardized command and control system interoperable among Joint, Coalition, and Interagency entities. The Systems Engineering Analysis Cohort 9 (SEA-9) Rapid Response Command and Control (R2C2) integrated project team completed a systems engineering (SE) ...

Analysis of various types of single-polypeptide-chain (sc) heterodimeric A{sub 2A}R/D{sub 2}R complexes and their allosteric receptor–receptor interactions

Energy Technology Data Exchange (ETDEWEB)

Kamiya, Toshio, E-mail: kamiya@z2.keio.jp [Department of Molecular Cell Signaling, Tokyo Metropolitan Institute for Neuroscience, 2-6 Musashidai, Fuchu, Tokyo 183-8526 (Japan); Department of Neurology, Tokyo Metropolitan Institute for Neuroscience, 2-6 Musashidai, Fuchu, Tokyo 183-8526 (Japan); Cell Biology Laboratory, School of Pharmaceutical Sciences, Kinki University, 3-4-1 Kowakae, Higashi-Osaka, Osaka 577-8502 (Japan); Yoshioka, Kazuaki; Nakata, Hiroyasu [Department of Molecular Cell Signaling, Tokyo Metropolitan Institute for Neuroscience, 2-6 Musashidai, Fuchu, Tokyo 183-8526 (Japan)

2015-01-09

Highlights: • Various scA{sub 2A}R/D{sub 2}R constructs, with spacers between the two receptors, were created. • Using whole cell binding assay, constructs were examined for their binding activity. • Although the apparent ratio of A{sub 2A}R to D{sub 2}R binding sites should be 1, neither was 1. • Counter agonist-independent binding cooperativity occurred in context of scA{sub 2A}R/D{sub 2}R. - Abstract: Adenosine A{sub 2A} receptor (A{sub 2A}R) heteromerizes with dopamine D{sub 2} receptor (D{sub 2}R). However, these class A G protein-coupled receptor (GPCR) dimers are not fully formed, but depend on the equilibrium between monomer and dimer. In order to stimulate the heteromerization, we have previously shown a successful design for a fusion receptor, single-polypeptide-chain (sc) heterodimeric A{sub 2A}R/D{sub 2}R complex. Here, using whole cell binding assay, six more different scA{sub 2A}R/D{sub 2}R constructs were examined. Not only in scA{sub 2A}R/D{sub 2}R ‘liberated’ with longer spacers between the two receptors, which confer the same configuration as the prototype, the A{sub 2A}R-odr4TM-D{sub 2L}R, but differ in size (Forms 1–3), but also in scA{sub 2A}R/D{sub 2L}R (Form 6) fused with a transmembrane (TM) of another type II TM protein, instead of odr4TM, neither of their fixed stoichiometry (the apparent ratios of A{sub 2A}R to D{sub 2}R binding sites) was 1, suggesting their compact folding. This suggests that type II TM, either odr4 or another, facilitates the equilibrial process of the dimer formation between A{sub 2A}R and D{sub 2L}R, resulting in the higher-order oligomer formation from monomer of scA{sub 2A}R/D{sub 2L}R itself. Also, in the reverse type scA{sub 2A}R/D{sub 2L}R, i.e., the D{sub 2L}R-odr4TM-A{sub 2A}R, counter agonist-independent binding cooperativity (cooperative folding) was found to occur (Forms 4 and 5). In this way, the scA{sub 2A}R/D{sub 2L}R system has unveiled the cellular phenomenon as a snapshot of the

Differential equation analysis in biomedical science and engineering partial differential equation applications with R

CERN Document Server

Schiesser, William E

2014-01-01

Features a solid foundation of mathematical and computational tools to formulate and solve real-world PDE problems across various fields With a step-by-step approach to solving partial differential equations (PDEs), Differential Equation Analysis in Biomedical Science and Engineering: Partial Differential Equation Applications with R successfully applies computational techniques for solving real-world PDE problems that are found in a variety of fields, including chemistry, physics, biology, and physiology. The book provides readers with the necessary knowledge to reproduce and extend the com

Lack of an association of miR-938 SNP in IDDM10 with human type 1 diabetes

Directory of Open Access Journals (Sweden)

Mi Xiaofan

2011-10-01

Full Text Available Abstract MicroRNAs (miRNAs are a newly discovered type of small non-protein coding RNA that function in the inhibition of effective mRNA translation, and may serve as susceptibility genes for various disease developments. The SNP rs12416605, located in human type 1 diabetes IDDM10 locus, changes the seeding sequence (UGU[G/A]CCC of miRNA miR-938 and potentially alters miR-938 targets, including IL-16 and IL-17A. In an attempt to test whether miR-938 may be a susceptibility gene for IDDM10, we assessed the possible association of the miR-938 SNP with T1D in an American Caucasian cohort of 622 patients and 723 healthy controls by TaqMan assay. Our current data do not support the association between the SNP in miR-938 and type 1 diabetes.

Exergy Analysis and Optimization of an Alpha Type Stirling Engine Using the Implicit Filtering Algorithm

Directory of Open Access Journals (Sweden)

James A. Wills

2017-12-01

Full Text Available This paper presents the exergy analysis and optimization of the Stirling engine, which has enormous potential for use in the renewable energy industry as it is quiet, efficient, and can operate with a variety of different heat sources and, therefore, has multi-fuel capabilities. This work aims to present a method that can be used by a Stirling engine designer to quickly and efficiently find near-optimal or optimal Stirling engine geometry and operating conditions. The model applies the exergy analysis methodology to the ideal-adiabatic Stirling engine model. In the past, this analysis technique has only been applied to highly idealized Stirling cycle models and this study shows its use in the realm of Stirling cycle optimization when applied to a more complex model. The implicit filtering optimization algorithm is used to optimize the engine as it quickly and efficiently computes the optimal geometry and operating frequency that gives maximum net-work output at a fixed energy input. A numerical example of a 1,000 cm3 engine is presented, where the geometry and operating frequency of the engine are optimized for four different regenerator mesh types, varying heater inlet temperature and a fixed energy input of 15 kW. The WN200 mesh is seen to perform best of the four mesh types analyzed, giving the greatest net-work output and efficiency. The optimal values of several different engine parameters are presented in the work. It is shown that the net-work output and efficiency increase with increasing heater inlet temperature. The optimal dead-volume ratio, swept volume ratio, operating frequency, and phase angle are all shown to decrease with increasing heater inlet temperature. In terms of the heat exchanger geometry, the heater and cooler tubes are seen to decrease in size and the cooler and heater effectiveness is seen to decrease with increasing heater temperature, whereas the regenerator is seen to increase in size and effectiveness. In

Developmental Decline in the MicroRNA 199a (miR-199a)/miR-214 Cluster in Human Fetal Lung Promotes Type II Cell Differentiation by Upregulating Key Transcription Factors.

Science.gov (United States)

Mishra, Ritu; Benlhabib, Houda; Guo, Wei; Lerma Cervantes, Connie B; Mendelson, Carole R

2018-06-01

The major surfactant protein, SP-A (a product of the SFTPA gene), serves as a marker of type II pneumocyte differentiation and surfactant synthesis. SFTPA expression in cultured human fetal lung (HFL) epithelial cells is upregulated by hormones that increase cyclic AMP (cAMP) and activate TTF-1/NKX2.1 and NF-κB. To further define mechanisms for type II cell differentiation and induction of SP-A, we investigated roles of microRNAs (miRNAs). Using microarray to identify differentially expressed miRNAs in HFL epithelial cells during type II cell differentiation in culture, we observed that members of the miRNA 199a (miR-199a)/miR-214 cluster were significantly downregulated during differentiation. Validated and predicted targets of miR-199a-3p/miR-199a-5p and miR-214, which serve roles in type II cell differentiation (COX-2, NF-κB p50/p65, and CREB1), and the CREB1 target, C/EBPβ, were coordinately upregulated. Accordingly, overexpression of miR-199a-5p, miR-199a-3p, or miR-214 mimics in cultured HFL epithelial cells decreased COX-2, NF-κB p50/p65, CREB1, and C/EBPβ proteins, with an associated inhibition of SP-A expression. Interestingly, overexpression of the EMT factor, ZEB1, which declines during cAMP-induced type II cell differentiation, increased pri-miR-199a and reduced the expression of the targets NF-κB/p50 and COX-2. Collectively, these findings suggest that the developmental decline in miR-199a/miR-214 in HFL causes increased expression of critical targets that enhance type II cell differentiation and SP-A expression. Copyright © 2018 American Society for Microbiology.

Expression of the sweetpotato R2R3-type IbMYB1a gene induces anthocyanin accumulation in Arabidopsis.

Science.gov (United States)

Chu, Hyosub; Jeong, Jae Cheol; Kim, Wook-Jin; Chung, Dong Min; Jeon, Hyo Kon; Ahn, Young Ock; Kim, Sun Ha; Lee, Haeng-Soon; Kwak, Sang-Soo; Kim, Cha Young

2013-06-01

R2R3-type MYB transcription factors (TFs) play important roles in transcriptional regulation of anthocyanins. The R2R3-type IbMYB1 is known to be a key regulator of anthocyanin biosynthesis in the storage roots of sweetpotato. We previously showed that transient expression of IbMYB1a led to anthocyanin pigmentation in tobacco leaves. In this article, we generated transgenic Arabidopsis plants expressing the IbMYB1a gene under the control of CaMV 35S promoter, and the sweetpotato SPO and SWPA2 promoters. Overexpression of IbMYBa in transgenic Arabidopsis produced strong anthocyanin pigmentation in seedlings and generated a deep purple color in leaves, stems and seeds. Reverse transcription-polymerase chain reaction analysis showed that IbMYB1a expression induced upregulation of several structural genes in the anthocyanin biosynthetic pathway, including 4CL, CHI, F3'H, DFR, AGT, AAT and GST. Furthermore, overexpression of IbMYB1a led to enhanced expression of the AtTT8 (bHLH) and PAP1/AtMYB75 genes. high-performance liquid chromatography analysis revealed that IbMYB1a expression led to the production of cyanidin as a major core molecule of anthocyanidins in Arabidopsis, as occurs in the purple leaves of sweetpotato (cv. Sinzami). This result shows that the IbMYB1a TF is sufficient to induce anthocyanin accumulation in seedlings, leaves, stems and seeds of Arabidopsis plants. Copyright © Physiologia Plantarum 2012.

Performance enhancement of a spark ignition engine fed by different fuel types

International Nuclear Information System (INIS)

Hedfi, Hachem; Jbara, Abdessalem; Jedli, Hedi; Slimi, Khalifa; Stoppato, Anna

2016-01-01

Highlights: • Biogas mixed with hydrogen is checked for a spark ignition engine. • An engine fed by biogas, hydrogen, natural gas or liquid petroleum gas is studied. • Efficiency is optimized with respect to consumption and exhaust gas recirculation. • Combustion reaction progress is characterized in real time. - Abstract: A numerical model based on thermodynamic and kinetic analyses has been established in order to evaluate biogas, hydrogen, natural gas or liquid petroleum gas as fuels in a spark ignition engine. For each fuel type, consumption as well as efficiency have been compared to gasoline in order to generate the same engine work (in the range of 0.28–0.43 W h/cycle). It was found that the spark ignition engine can be fed by an equimolar mixture of biogas and hydrogen. Moreover, thermal efficiency has been enhanced with respect to fuel consumption and exhaust gas recirculation (EGR). It was shown that an equimolar mixture between biogas and hydrogen increases the ITE by around 2.2% and decreases the mass consumption by less than 0.01 g/cycle. In addition, the combustion reaction progresses as well as CO and CO_2 emissions have been characterized in real time.

Calcium microdomains near R-type calcium channels control the induction of presynaptic LTP at parallel fiber to Purkinje cell synapses

Science.gov (United States)

Myoga, Michael H.; Regehr, Wade G.

2011-01-01

R-type calcium channels in postsynaptic spines signal through functional calcium microdomains to regulate a calcium-calmodulin sensitive potassium channel that in turn regulates postsynaptic hippocampal LTP. Here we ask whether R-type calcium channels in presynaptic terminals also signal through calcium microdomains to control presynaptic LTP. We focus on presynaptic LTP at parallel fiber to Purkinje cell synapses in the cerebellum (PF-LTP), which is mediated by calcium/calmodulin-stimulated adenylyl cyclases. Although most presynaptic calcium influx is through N-type and P/Q-type calcium channels, blocking these channels does not disrupt PF-LTP, but blocking R-type calcium channels does. Moreover, global calcium signaling cannot account for the calcium dependence of PF-LTP because R-type channels contribute modestly to overall calcium entry. These findings indicate that within presynaptic terminals, R-type calcium channels produce calcium microdomains that evoke presynaptic LTP at moderate frequencies that do not greatly increase global calcium levels,. PMID:21471358

Metabolic and molecular analyses of white mutant Vaccinium berries show down-regulation of MYBPA1-type R2R3 MYB regulatory factor.

Science.gov (United States)

Primetta, Anja K; Karppinen, Katja; Riihinen, Kaisu R; Jaakola, Laura

2015-09-01

MYBPA1-type R2R3 MYB transcription factor shows down-regulation in white mutant berries of Vaccinium uliginosum deficient in anthocyanins but not proanthocyanidins suggesting a role in the regulation of anthocyanin biosynthesis. Berries of the genus Vaccinium are among the best natural sources of flavonoids. In this study, the expression of structural and regulatory flavonoid biosynthetic genes and the accumulation of flavonoids in white mutant and blue-colored wild-type bog bilberry (V. uliginosum) fruits were measured at different stages of berry development. In contrast to high contents of anthocyanins in ripe blue-colored berries, only traces were detected by HPLC-ESI-MS in ripe white mutant berries. However, similar profile and high levels of flavonol glycosides and proanthocyanidins were quantified in both ripe white and ripe wild-type berries. Analysis with qRT-PCR showed strong down-regulation of structural genes chalcone synthase (VuCHS), dihydroflavonol 4-reductase (VuDFR) and anthocyanidin synthase (VuANS) as well as MYBPA1-type transcription factor VuMYBPA1 in white berries during ripening compared to wild-type berries. The profiles of transcript accumulation of chalcone isomerase (VuCHI), anthocyanidin reductase (VuANR), leucoanthocyanidin reductase (VuLAR) and flavonoid 3'5' hydroxylase (VuF3'5'H) were more similar between the white and the wild-type berries during fruit development, while expression of UDP-glucose: flavonoid 3-O-glucosyltransferase (VuUFGT) showed similar trend but fourfold lower level in white mutant. VuMYBPA1, the R2R3 MYB family member, is a homologue of VmMYB2 of V. myrtillus and VcMYBPA1 of V. corymbosum and belongs to MYBPA1-type MYB family which members are shown in some species to be related with proanthocyanidin biosynthesis in fruits. Our results combined with earlier data of the role of VmMYB2 in white mutant berries of V. myrtillus suggest that the regulation of anthocyanin biosynthesis in Vaccinium species could differ

Jet engine R and D and I; Watashi to jet engine kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Murashima, K. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

1998-06-10

My efforts towards at the development of aeroengines since the end of the war are described. The J3-7 engine propelled the T1 trainer plane, and was installed as booster aboard the P2J antisubmarine patrol aircraft. It was the first jet engine that Japan produced after the end of the war, and had been in use until quite recently. I took part in the construction of a prototype of the JR100 series designed to serve as VTOL (vertical take-off and landing) aircraft lift engines, and in the test thereof. As the shift from turbojet to turbofan proceeded, I participated in the development of the FJR710 engine under the guidance of National Aerospace Laboratory, and the product was installed aboard an experimental STOL (short take-off and landing) aircraft Asuka. I next joined a Defense Agency initiative for a reheat turbofan to replace the J3 aboard trainer plane, and the result was the low bypass ratio/high output F3 engine. In 1989, Ministry of International Trade and Industry decided for a large-scale project of developing an engine for a next-generation supersonic transport, and the HYPR (Super/Hypersonic Transport Propulsion System) project was started. The project was participated in by manufacturers from overseas, which were GE, P and W, RR, and SNECMA. The foreign corporations worked on an equal footing with the Japanese parties, and collaboration between the participants was smooth, with each party endeavoring in the field they were good at. The project will be concluded as scheduled in fiscal 1998. (NEDO)

The two ∇{sup 6}R{sup 4} type invariants and their higher order generalisation

Energy Technology Data Exchange (ETDEWEB)

Bossard, Guillaume; Verschinin, Valentin [Centre de Physique Théorique, Ecole Polytechnique, CNRS,91128 Palaiseau cedex (France)

2015-07-29

We show that there are two distinct classes of ∇{sup 6}R{sup 4} type supersymmetry invariants in maximal supergravity. The second class includes a coupling in F{sup 2}∇{sup 4}R{sup 4} that generalises to 1/8 BPS protected F{sup 2k}∇{sup 4}R{sup 4} couplings. We work out the supersymmetry constraints on the corresponding threshold functions, and argue that the functions in the second class satisfy to homogeneous differential equations for arbitrary k≥1, such that the corresponding exact threshold functions in type II string theory should be proportional to Eisenstein series, which we identify. This analysis explains in particular that the exact ∇{sup 6}R{sup 4} threshold function is the sum of an Eisenstein function and a solution to an inhomogeneous Poisson equation in string theory.

Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines. A critical review

Energy Technology Data Exchange (ETDEWEB)

Sahoo, B.B. [Centre for Energy, Indian Institute of Technology, Guwahati 781039 (India); Sahoo, N.; Saha, U.K. [Department of Mechanical Engineering, Indian Institute of Technology, Guwahati 781039 (India)

2009-08-15

Petroleum resources are finite and, therefore, search for their alternative non-petroleum fuels for internal combustion engines is continuing all over the world. Moreover gases emitted by petroleum fuel driven vehicles have an adverse effect on the environment and human health. There is universal acceptance of the need to reduce such emissions. Towards this, scientists have proposed various solutions for diesel engines, one of which is the use of gaseous fuels as a supplement for liquid diesel fuel. These engines, which use conventional diesel fuel and gaseous fuel, are referred to as 'dual-fuel engines'. Natural gas and bio-derived gas appear more attractive alternative fuels for dual-fuel engines in view of their friendly environmental nature. In the gas-fumigated dual-fuel engine, the primary fuel is mixed outside the cylinder before it is inducted into the cylinder. A pilot quantity of liquid fuel is injected towards the end of the compression stroke to initiate combustion. When considering a gaseous fuel for use in existing diesel engines, a number of issues which include, the effects of engine operating and design parameters, and type of gaseous fuel, on the performance of the dual-fuel engines, are important. This paper reviews the research on above issues carried out by various scientists in different diesel engines. This paper touches upon performance, combustion and emission characteristics of dual-fuel engines which use natural gas, biogas, producer gas, methane, liquefied petroleum gas, propane, etc. as gaseous fuel. It reveals that 'dual-fuel concept' is a promising technique for controlling both NO{sub x} and soot emissions even on existing diesel engine. But, HC, CO emissions and 'bsfc' are higher for part load gas diesel engine operations. Thermal efficiency of dual-fuel engines improve either with increased engine speed, or with advanced injection timings, or with increased amount of pilot fuel. The ignition

Rational evolution of the unusual Y-type oxyanion hole of Rhodococcus sp. CR53 lipase LipR.

Science.gov (United States)

Infanzón, Belén; Sotelo, Pablo H; Martínez, Josefina; Diaz, Pilar

2018-01-01

Rhodococcus sp CR-53 lipase LipR was the first characterized member of bacterial lipase family X. Interestingly, LipR displays some similarity with α/β-hydrolases of the C. antartica lipase A (CAL-A)-like superfamily (abH38), bearing a Y-type oxyanion hole, never found before among bacterial lipases. In order to explore this unusual Y-type oxyanion hole, and to improve LipR performance, two modification strategies based on site directed or saturation mutagenesis were addressed. Initially, a small library of mutants was designed to convert LipR Y-type oxyanion hole (YDS) into one closer to those most frequently found in bacteria (GGG(X)). However, activity was completely lost in all mutants obtained, indicating that the Y-type oxyanion hole of LipR is required for activity. A second approach was addressed to modify the two main oxyanion hole residues Tyr 110 and Asp 111 , previously described for CAL-A as the most relevant amino acids involved in stabilization of the enzyme-substrate complex. A saturation mutagenesis library was prepared for each residue (Tyr 110 and Asp 111 ), and activity of the resulting variants was assayed on different chain length substrates. No functional LipR variants could be obtained when Tyr 110 was replaced by any other amino acids, indicating that this is a crucial residue for catalysis. However, among the Asp 111 variants obtained, LipR D111G produced a functional enzyme. Interestingly, this LipR-YGS variant showed less activity than wild type LipR on short- or mid- chain substrates but displayed a 5.6-fold increased activity on long chain length substrates. Analysis of the 3D model and in silico docking studies of this enzyme variant suggest that substitution of Asp by Gly produces a wider entrance tunnel that would allow for a better and tight accommodation of larger substrates, thus justifying the experimental results obtained. Copyright © 2017 Elsevier Inc. All rights reserved.

77 FR 51695 - Airworthiness Directives; Honeywell International Inc. Turbofan Engines

Science.gov (United States)

2012-08-27

... Airworthiness Directives; Honeywell International Inc. Turbofan Engines AGENCY: Federal Aviation Administration... Honeywell International Inc. TFE731-20R, -20AR, -20BR, -40, -40AR, - 40R, -50R, and -60 turbofan engines... Inc. TFE731-20R, -20AR, -20BR, -40, -40AR, -40R, -50R, and -60 turbofan engines: (i) With an engine...

Thermodynamic analysis of a beta-type Stirling engine with rhombic drive mechanism

International Nuclear Information System (INIS)

Aksoy, Fatih; Cinar, Can

2013-01-01

Highlights: • Thermodynamic analysis of Stirling engine with rhombic-drive mechanism was performed. • The analysis was performed for smooth and grooved displacer cylinders. • The convective heat transfer coefficient was predicted using the experimental results. • The experimental results was compared with the theoretical results. - Abstract: This paper presents a theoretical investigation on kinematic and thermodynamic analysis of a beta type Stirling engine with rhombic-drive mechanism. Variations in the hot and cold volumes of the engine were calculated using kinematic relations. Two different displacer cylinders were investigated: one of them had smooth inner surface and the other had axial slots grooved into the cylinder to increase the heat transfer area. The effects of the slots grooved into the displacer cylinder inner surface on the performance were calculated using nodal analysis in Fortran. The effects of working fluid mass on cyclic work were investigated using 200, 300 and 400 W/m 2 K convective heat transfer coefficients for smooth and grooved displacer cylinders. The variation of engine power with engine speed was obtained by using the same convective heat transfer coefficients and isothermal conditions. The convective heat transfer coefficient was predicted as 104 W/m 2 K using the experimental results measured from the prototype engine under atmospheric conditions. The variation in cyclic work determined by the experimental study was also compared with the theoretical results obtained for different convective heat transfer coefficients and isothermal conditions

Rationale-Based Engineering of a Potent Long-Acting FGF21 Analog for the Treatment of Type 2 Diabetes.

Directory of Open Access Journals (Sweden)

Randy Hecht

Full Text Available Fibroblast growth factor 21 (FGF21 is a promising drug candidate for the treatment of type 2 diabetes. However, the use of wild type native FGF21 is challenging due to several limitations. Among these are its short half-life, its susceptibility to in vivo proteolytic degradation and its propensity to in vitro aggregation. We here describe a rationale-based protein engineering approach to generate a potent long-acting FGF21 analog with improved resistance to proteolysis and aggregation. A recombinant Fc-FGF21 fusion protein was constructed by fusing the Fc domain of human IgG1 to the N-terminus of human mature FGF21 via a linker peptide. The Fc positioned at the N-terminus was determined to be superior to the C-terminus as the N-terminal Fc fusion retained the βKlotho binding affinity and the in vitro and in vivo potency similar to native FGF21. Two specific point mutations were introduced into FGF21. The leucine to arginine substitution at position 98 (L98R suppressed FGF21 aggregation at high concentrations and elevated temperatures. The proline to glycine replacement at position 171 (P171G eliminated a site-specific proteolytic cleavage of FGF21 identified in mice and cynomolgus monkeys. The derived Fc-FGF21(RG molecule demonstrated a significantly improved circulating half-life while maintaining the in vitro activity similar to that of wild type protein. The half-life of Fc-FGF21(RG was 11 h in mice and 30 h in monkeys as compared to 1-2 h for native FGF21 or Fc-FGF21 wild type. A single administration of Fc-FGF21(RG in diabetic mice resulted in a sustained reduction in blood glucose levels and body weight gains up to 5-7 days, whereas the efficacy of FGF21 or Fc-FGF21 lasted only for 1 day. In summary, we engineered a potent and efficacious long-acting FGF21 analog with a favorable pharmaceutical property for potential clinical development.

Studies on the production of branched-chain alcohols in engineered Ralstonia eutropha

Energy Technology Data Exchange (ETDEWEB)

Lu, Jingnan [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Chemistry; Brigham, Christopher J.; Gai, Claudia S. [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Biology; Sinskey, Anthony J. [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Biology; Massachusetts Institute of Technology, Cambridge, MA (United States). Div. of Health Sciences and Technology; Massachusetts Institute of Technology, Cambridge, MA (United States). Engineering Systems Div.

2012-10-15

Wild-type Ralstonia eutropha H16 produces polyhydroxybutyrate (PHB) as an intracellular carbon storage material during nutrient stress in the presence of excess carbon. In this study, the excess carbon was redirected in engineered strains from PHB storage to the production of isobutanol and 3-methyl-1-butanol (branched-chain higher alcohols). These branched-chain higher alcohols can directly substitute for fossil-based fuels and be employed within the current infrastructure. Various mutant strains of R. eutropha with isobutyraldehyde dehydrogenase activity, in combination with the overexpression of plasmid-borne, native branched-chain amino acid biosynthesis pathway genes and the overexpression of heterologous ketoisovalerate decarboxylase gene, were employed for the biosynthesis of isobutanol and 3-methyl-1-butanol. Production of these branched-chain alcohols was initiated during nitrogen or phosphorus limitation in the engineered R. eutropha. One mutant strain not only produced over 180 mg/L branched-chain alcohols in flask culture, but also was significantly more tolerant of isobutanol toxicity than wild-type R. eutropha. After the elimination of genes encoding three potential carbon sinks (ilvE, bkdAB, and aceE), the production titer improved to 270 mg/L isobutanol and 40 mg/L 3-methyl-1-butanol. Semicontinuous flask cultivation was utilized to minimize the toxicity caused by isobutanol while supplying cells with sufficient nutrients. Under this semicontinuous flask cultivation, the R. eutropha mutant grew and produced more than 14 g/L branched-chain alcohols over the duration of 50 days. These results demonstrate that R. eutropha carbon flux can be redirected from PHB to branched-chain alcohols and that engineered R. eutropha can be cultivated over prolonged periods of time for product biosynthesis. (orig.)

An Investigation of the Relationship between PPP1R3 Gene Polymorphism and Type 2 Diabetes

Directory of Open Access Journals (Sweden)

Soyar Sari

2017-07-01

Full Text Available Background and Objectives: PPP1R3 is one of the genes confirmed to be associated with type 2 diabetes. This gene is located on the long arm of chromosome 7 and encodes protein phosphatase 1 (PP1, which has serine/threonine phosphatase activity. There is a polymorphic region in the 3'UTR region of this gene, which creates ARE1 and ARE2 alleles. The aim of this study was to determine the relationship between PPP1R3 gene polymorphism and type 2 diabetes. Methods: In this case-control study, 100 patients with type 2 diabetes and 100 healthy individuals, were randomly selected from the study population. PPP1R3 gene polymorphism was analyzed using PCR-RFLP method. Comparison of variables between healthy and patient groups, was performed by t-test, allele frequency by counting, and calculation of their ratio by chi-square test, and the population was confirmed to be in Hardy-Weinberg equilibrium. Distribution of genotypes and alleles was compared between healthy and patient groups. Results: In this study, there was no significant difference between the frequency of genotypes and frequency of alleles in subjects with type 2 diabetes and healthy control subjects. Conclusion: The findings of this study indicated that polymorphisms in the 3'UTR region of PPP1R3 gene is not associated with type 2 diabetes.

Energy and Exergy Balances for Modern Diesel and Gasoline Engines Bilans d’énergie et d’exergie pour des moteurs Diesel et essence récents

Directory of Open Access Journals (Sweden)

Bourhis G.

2009-11-01

Full Text Available The aim is here to evaluate the difference between the energy and exergy (or available energy balances when heat recovery is considered in an internal combustion engine. In the first case, the entropy of the system is not taken into account so that, the maximum useful work recoverable from a system can not be estimated. Then, the second case is much more adapted to estimate heat recovery potential. In this paper, two modern engines are evaluated. First, an up-to-date gasoline engine: three-cylinder, downsized, low friction, then a modern common rail downsized Diesel engine. For each one, two energy and exergy balances are given for two different part-load operating points representative of the NEDC cycle using experimental data from steady state engine test benches. For the Diesel engine, it is shown that effective work represents around 30% and that around 55% of the energy introduced into the combustion chamber is lost (in the form of heat, especially in exhaust gas, in water coolant and oil. But when considering exergy balance, only 12% of the total exergy introduced through the fuel can be recovered, in order to produce useful work. Expecting a 25% exergy recovery efficiency, the effective engine efficiency could be increased by 10%. For the gasoline engine, the increase of the output work could be around 15%. L’objectif est ici d’évaluer la différence entre bilan d’énergie et d’exergie (ou énergie utile pour des moteurs à combustion interne lorsque la problématique de récupération d’énergie est prise en compte. Dans le premier cas, l’entropie du système n’est pas considérée, si bien que le travail utile maximal qu’il est possible de récupérer d’un système ne peut pas être estimé. Tandis que le second cas est bien mieux adapté pour estimer le potentiel de la récupération d’énergie. Dans cet article, deux moteurs modernes sont étudiés. Le premier est un moteur essence récent, 3 cylindres, de cylindr

Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering

International Nuclear Information System (INIS)

Gautam, Sneh; Chou, Chia-Fu; Dinda, Amit K.; Potdar, Pravin D.; Mishra, Narayan C.

2014-01-01

In the present study, a tri-polymer polycaprolactone (PCL)/gelatin/collagen type I composite nanofibrous scaffold has been fabricated by electrospinning for skin tissue engineering and wound healing applications. Firstly, PCL/gelatin nanofibrous scaffold was fabricated by electrospinning using a low cost solvent mixture [chloroform/methanol for PCL and acetic acid (80% v/v) for gelatin], and then the nanofibrous PCL/gelatin scaffold was modified by collagen type I (0.2–1.5 wt.%) grafting. Morphology of the collagen type I-modified PCL/gelatin composite scaffold that was analyzed by field emission scanning electron microscopy (FE-SEM), showed that the fiber diameter was increased and pore size was decreased by increasing the concentration of collagen type I. Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis indicated the surface modification of PCL/gelatin scaffold by collagen type I immobilization on the surface of the scaffold. MTT assay demonstrated the viability and high proliferation rate of L929 mouse fibroblast cells on the collagen type I-modified composite scaffold. FE-SEM analysis of cell-scaffold construct illustrated the cell adhesion of L929 mouse fibroblasts on the surface of scaffold. Characteristic cell morphology of L929 was also observed on the nanofiber mesh of the collagen type I-modified scaffold. Above results suggest that the collagen type I-modified PCL/gelatin scaffold was successful in maintaining characteristic shape of fibroblasts, besides good cell proliferation. Therefore, the fibroblast seeded PCL/gelatin/collagen type I composite nanofibrous scaffold might be a potential candidate for wound healing and skin tissue engineering applications. - Highlights: • PCL/gelatin/collagen type I scaffold was fabricated for skin tissue engineering. • PCL/gelatin/collagen type I scaffold showed higher fibroblast growth than PCL/gelatin one. • PCL/gelatin/collagen type I might be one of the ideal scaffold for

Building of Nuclear Ship Engineering Simulation System development of the simulator for the integral type reactor

Energy Technology Data Exchange (ETDEWEB)

Takahashi, Teruo; Shimazaki, Junya; Yabuuchi, Noriaki; Fukuhara, Yosifumi; Kusunoki, Takeshi; Ochiai, Masaaki [Department of Nuclear Energy Systems, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Nakazawa, Toshio [Department of HTTR Project, Oarai Research Establishment, Japan Atomic Energy Research Institute, Oarai, Ibaraki (Japan)

2000-03-01

JAERI had carried out the design study of a light-weight and compact integral type reactor of power 100 MW{sub th} with passive safety as a power source for the future nuclear ships, and completed an engineering design. To confirm the design and operation performance and to utilize the study of automation of the operations of reactor, we developed a real-time simulator for the integral type reactor. This simulator is a part of Nuclear Ship Engineering Simulation System (NESSY) and on the same hardware as 'Mutsu' simulator which was developed to simulate the first Japanese nuclear ship Mutsu'. Simulation accuracy of 'Mutsu' simulator was verified by comparing the simulation results With data got in the experimental voyage of 'Mutsu'. The simulator for the integral type reactor uses the same programs which were used in 'Mutsu' simulator for the separate type PWR, and the simulated results are approximately consistent with the calculated values using RELAP5/MOD2 (The later points are reported separately). Therefore simulation accuracy of the simulator for the integral type reactor is also expected to be reasonable, though it is necessary to verify by comparing with the real plant data or experimental data in future. We can get the perspectives to use as a real-time engineering simulator and to achieve the above-mentioned aims. This is a report on development of the simulator for the integral type reactor mainly focused on the contents of the analytical programs expressed the structural features of reactor. (author)

Federal Funding of Engineering Research and Development, 1980-1984.

Science.gov (United States)

American Society of Mechanical Engineers, Washington, DC.

Data on the sources, amounts, and trends of federal funding for engineering research and development (R&D) are presented for 1980-1984. Narrative highlights are provided for: the total federal funding obligations for engineering R&D, mechanical engineering, astronautical engineering, aeronautical engineering, chemical engineering, civil…

76 FR 72348 - Airworthiness Directives; Pratt & Whitney Turbofan Engines

Science.gov (United States)

2011-11-23

... Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking..., -7R4D1, -7R4E, -7R4E1, -7R4G2, -7R4H1, and - 7R4E4 turbofan engines. This proposed AD would establish a... turbofan engines installed on airplanes of U.S. registry. We also estimate that it would take about 28.8...

77 FR 15939 - Airworthiness Directives; Pratt & Whitney Turbofan Engines

Science.gov (United States)

2012-03-19

... Airworthiness Directives; Pratt & Whitney Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... & Whitney (PW) JT9D series turbofan engines. That AD currently requires revisions to the Airworthiness..., -7R4E, - 7R4E1, -7R4E4, -7R4G2, and -7R4H1 series turbofan engines. (d) Unsafe Condition This AD results...

MYC-rearranged lymphomas other than Burkitt: Comparison between R-CHOP and Burkitt-type immunochemotherapy.

Science.gov (United States)

Baptista, Maria Joao; Tapia, Gustavo; Hernández-Rivas, José-Ángel; Martínez-Trillos, Alejandra; Mate, José-Luis; Navarro, José-Tomás

2017-10-23

MYC-rearranged (MYC-R) lymphomas other than Burkitt lymphoma (BL) are very aggressive, with poor prognosis when treated with standard regimens. We aimed to study the characteristics and outcome of a series of MYC-R lymphomas comparing the treatment results between R-CHOP based and a specific intensive regimen for BL (BURKIMAB). Retrospective study of patients diagnosed with MYC-R. Translocations of MYC, BCL2 and BCL6 were evaluated by fluorescent in situ hybridization. Patients were treated with either, R-CHOP based immunochemotherapy or the Burkitt type regimen, BURKIMAB. Thirty-four MYC-R lymphoma cases were studied: 21 treated with R-CHOP and 13 treated with BURKIMAB. There were no differences in CR rate; 45% (9/20) for R-CHOP and 42% (5/12) for BURKIMAB (P=.99). Although overall survival (OS) and progression free survival (PFS) of BURKIMAB-treated patients were better than those of R-CHOP-treated (3y-OS: 46 vs. 24%; 3y-PFS: 46 vs. 10%), the differences were not statistically significant. MYC-R lymphomas show poor outcomes even when treated with intensive immunochemotherapy for BL. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

R&D 100 Awards | NREL

Science.gov (United States)

R&D 100 Awards R&D 100 Awards NREL has won 61 R&D 100 Awards. Widely recognized as the Oscars of Invention, the R&D 100 Awards are presented by R&D Magazine to identify and celebrate the top technological advances of the year. Recent R&D 100 Awards 2016 NREL engineers Chuck Booten

WISC-R Scatter and Patterns in Three Types of Learning Disabled Children.

Science.gov (United States)

Tabachnick, Barbara G.; Turbey, Carolyn B.

Wechsler Intelligence Scale for Children-Revised (WISC-R) subtest scatter and Bannatyne recategorization scores were investigated with three types of learning disabilities in children 6 to 16 years old: visual-motor and visual-perceptual disability (N=66); auditory-perceptual and receptive language deficit (N=18); and memory deficit (N=12). Three…

Predictive modeling of performance of a helium charged Stirling engine using an artificial neural network

International Nuclear Information System (INIS)

Özgören, Yaşar Önder; Çetinkaya, Selim; Sarıdemir, Suat; Çiçek, Adem; Kara, Fuat

2013-01-01

Highlights: ► Max torque and power values were obtained at 3.5 bar Pch, 1273 K Hst and 1.4:1 r. ► According to ANOVA, the most influential parameter on power was Hst with 48.75%. ► According to ANOVA, the most influential parameter on torque was Hst with 41.78%. ► ANN (R 2 = 99.8% for T, P) was superior to regression method (R 2 = 92% for T, 81% for P). ► LM was the best learning algorithm in predicting both power and torque. - Abstract: In this study, an artificial neural network (ANN) model was developed to predict the torque and power of a beta-type Stirling engine using helium as the working fluid. The best results were obtained by 5-11-7-1 and 5-13-7-1 network architectures, with double hidden layers for the torque and power respectively. For these network architectures, the Levenberg–Marquardt (LM) learning algorithm was used. Engine performance values predicted with the developed ANN model were compared with the actual performance values measured experimentally, and substantially coinciding results were observed. After ANN training, correlation coefficients (R 2 ) of both engine performance values for testing and training data were very close to 1. Similarly, root-mean-square error (RMSE) and mean error percentage (MEP) values for the testing and training data were less than 0.02% and 3.5% respectively. These results showed that the ANN is an acceptable model for prediction of the torque and power of the beta-type Stirling engine

Epigenetic control of virulence gene expression in Pseudomonas aeruginosa by a LysR-type transcription regulator.

Directory of Open Access Journals (Sweden)

Keith H Turner

2009-12-01

Full Text Available Phenotypic variation within an isogenic bacterial population is thought to ensure the survival of a subset of cells in adverse conditions. The opportunistic pathogen Pseudomonas aeruginosa variably expresses several phenotypes, including antibiotic resistance, biofilm formation, and the production of CupA fimbriae. Here we describe a previously unidentified bistable switch in P. aeruginosa. This switch controls the expression of a diverse set of genes, including aprA, which encodes the secreted virulence factor alkaline protease. We present evidence that bistable expression of PA2432, herein named bexR (bistable expression regulator, which encodes a LysR-type transcription regulator, controls this switch. In particular, using DNA microarrays, quantitative RT-PCR analysis, chromatin immunoprecipitation, and reporter gene fusions, we identify genes directly under the control of BexR and show that these genes are bistably expressed. Furthermore, we show that bexR is itself bistably expressed and positively autoregulated. Finally, using single-cell analyses of a GFP reporter fusion, we present evidence that positive autoregulation of bexR is necessary for bistable expression of the BexR regulon. Our findings suggest that a positive feedback loop involving a LysR-type transcription regulator serves as the basis for an epigenetic switch that controls virulence gene expression in P. aeruginosa.

Tsunami engineering study in India

Digital Repository Service at National Institute of Oceanography (India)

Mandal, S.

ronmental Laboratory at NOAA, USA has the tsunami - research program ( http://www.pmel.noaa.gov/tsunami/). Th e t sunami research group is part of the Civi l Engineering Department at the Universit y of Southern California where undergra - duate... the engineering point of view. The Tsunami Engineering Labor a tory at the graduate School of Engineering, Tohoku Unive r sit y (http://www.tsunami.civil.tohoku.a c.jp/ hokusai2/main/eng/index.html) offers r e- se arch programmes on tsunami. The Uni - versity...

Programmable lithography engine (ProLE) grid-type supercomputer and its applications

Science.gov (United States)

Petersen, John S.; Maslow, Mark J.; Gerold, David J.; Greenway, Robert T.

2003-06-01

There are many variables that can affect lithographic dependent device yield. Because of this, it is not enough to make optical proximity corrections (OPC) based on the mask type, wavelength, lens, illumination-type and coherence. Resist chemistry and physics along with substrate, exposure, and all post-exposure processing must be considered too. Only a holistic approach to finding imaging solutions will accelerate yield and maximize performance. Since experiments are too costly in both time and money, accomplishing this takes massive amounts of accurate simulation capability. Our solution is to create a workbench that has a set of advanced user applications that utilize best-in-class simulator engines for solving litho-related DFM problems using distributive computing. Our product, ProLE (Programmable Lithography Engine), is an integrated system that combines Petersen Advanced Lithography Inc."s (PAL"s) proprietary applications and cluster management software wrapped around commercial software engines, along with optional commercial hardware and software. It uses the most rigorous lithography simulation engines to solve deep sub-wavelength imaging problems accurately and at speeds that are several orders of magnitude faster than current methods. Specifically, ProLE uses full vector thin-mask aerial image models or when needed, full across source 3D electromagnetic field simulation to make accurate aerial image predictions along with calibrated resist models;. The ProLE workstation from Petersen Advanced Lithography, Inc., is the first commercial product that makes it possible to do these intensive calculations at a fraction of a time previously available thus significantly reducing time to market for advance technology devices. In this work, ProLE is introduced, through model comparison to show why vector imaging and rigorous resist models work better than other less rigorous models, then some applications of that use our distributive computing solution are shown

Locally rotationally symmetric Bianchi type I cosmology in f(R, T) gravity

Energy Technology Data Exchange (ETDEWEB)

Shamir, M.F. [National University of Computer and Emerging Sciences, Department of Sciences and Humanities, Lahore (Pakistan)

2015-08-15

This manuscript is devoted to the investigation of the Bianchi type I universe in the context of f(R, T) gravity. For this purpose, we explore the exact solutions of locally rotationally symmetric Bianchi type I spacetime. The modified field equations are solved by assuming an expansion scalar θ proportional to the shear scalar σ, which gives A = B{sup n}, where A, B are the metric coefficients and n is an arbitrary constant. In particular, three solutions have been found and physical quantities are calculated in each case. (orig.)

Multivariate Location Estimation Using Extension of $R$-Estimates Through $U$-Statistics Type Approach

OpenAIRE

Chaudhuri, Probal

1992-01-01

We consider a class of $U$-statistics type estimates for multivariate location. The estimates extend some $R$-estimates to multivariate data. In particular, the class of estimates includes the multivariate median considered by Gini and Galvani (1929) and Haldane (1948) and a multivariate extension of the well-known Hodges-Lehmann (1963) estimate. We explore large sample behavior of these estimates by deriving a Bahadur type representation for them. In the process of developing these asymptoti...

New instrumentation for the IPR-R1 reactor of CDTN

International Nuclear Information System (INIS)

Carvalho, P.V.R. de.

1992-01-01

The Nuclear Engineering Institute reactor instrumentation area has developed systems and equipment for reactor operation and safety. In such way, the new I and C for IEN Argonauta reactor and the nuclear instrumentation for IPEN critical facility were built. This paper describes our real work, the new I and C systems for IPR-R1, a Triga type reactor, located at CDTN (Belo Horizonte - MG). (author)

Engineering graphic modelling a workbook for design engineers

CERN Document Server

Tjalve, E; Frackmann Schmidt, F

2013-01-01

Engineering Graphic Modelling: A Practical Guide to Drawing and Design covers how engineering drawing relates to the design activity. The book describes modeled properties, such as the function, structure, form, material, dimension, and surface, as well as the coordinates, symbols, and types of projection of the drawing code. The text provides drawing techniques, such as freehand sketching, bold freehand drawing, drawing with a straightedge, a draughting machine or a plotter, and use of templates, and then describes the types of drawing. Graphic designers, design engineers, mechanical engine

Experimental testing and theoretical prediction of traditional dowel-type connections in tension parallel to grain

Czech Academy of Sciences Publication Activity Database

Milch, J.; Tippner, J.; Brabec, M.; Sebera, V.; Kunecký, Jiří; Kloiber, Michal; Hasníková, Hana

2017-01-01

Roč. 152, December (2017), s. 180-187 ISSN 0141-0296 R&D Projects: GA MK(CZ) DG16P02M026 Keywords : digital image correlation * dowel-type joint * European yield model * load-carrying capacity * single-shear * stiffness Subject RIV: JN - Civil Engineering OBOR OECD: Construction engineering , Municipal and structural engineering Impact factor: 2.258, year: 2016 http://www.sciencedirect.com/science/ article /pii/S0141029616311324?via%3Dihub

A simple method of calculating Stirling engines for engine design optimization

Science.gov (United States)

Martini, W. R.

1978-01-01

A calculation method is presented for a rhombic drive Stirling engine with a tubular heater and cooler and a screen type regenerator. Generally the equations presented describe power generation and consumption and heat losses. It is the simplest type of analysis that takes into account the conflicting requirements inherent in Stirling engine design. The method itemizes the power and heat losses for intelligent engine optimization. The results of engine analysis of the GPU-3 Stirling engine are compared with more complicated engine analysis and with engine measurements.

A psychometric evaluation of the Diabetes Symptom Checklist-Revised (DSC-R cognitive distress, fatigue, hyperglycemia, and hypoglycemia subscales in patients with type 1 and type 2 diabetes

Directory of Open Access Journals (Sweden)

Naegeli AN

2010-03-01

Full Text Available April N Naegeli1, Timothy E Stump2, Risa P Hayes11Global Health Outcomes, Eli Lilly and Company, Indianapolis, IN, USA; 2Consultant, Indianapolis, IN, USAObjective: To explore the use of Diabetes Symptom Checklist-Revised (DSC-R Cognitive Distress, Fatigue, Hyperglycemia, and Hypoglycemia subscales as measures of acute diabetesassociated symptoms in patients with both type 1 and 2 diabetes.Research design and methods: Our study was conducted in context of two international, multicenter, randomized clinical trials for inhaled insulin. Confirmatory factor analyses and assessments of reliability and construct validity were performed.Results: Study participants were 371 patients with type 2 (56% male; mean age, 57 years and 481 with type 1 diabetes (57% male, mean age, 40 years. In both populations a four-factor model was the best fit. Cronbach’s α ≥ 0.79 and intraclass correlation coefficient ≥0.63; subscales correlated (P ≤ 0.05 with measures of well-being and satisfaction (0.12 ≤ r ≤ 0.71. In patients with type 1 diabetes, three subscales correlated (P < 0.05 with A1C.Conclusions: The psychometric properties of the DSC-R Cognitive Distress, Fatigue, Hyperglycemia, and Hypoglycemia suggest they may be utilized in clinical trials as reliable and valid measures of acute symptoms of diabetes.Keywords: Diabetes Symptom Checklist-Revised, DSC-R, type 1 diabetes, type 2 diabetes, psychometric validation

Evidence that two types of 18S rDNA coexist in the genome of Dugesia (Schmidtea) mediterranea (Platyhelminthes, Turbellaria, Tricladida).

Science.gov (United States)

Carranza, S; Giribet, G; Ribera, C; Baguñà; Riutort, M

1996-07-01

Sequences of 18S ribosomal DNA (rDNA) are increasingly being used to infer phylogenetic relationships among living taxa. Although the 18S rDNA belongs to a multigene family, all its copies are kept homogeneous by concerted evolution (Dover 1982; Hillis and Dixon 1991). To date, there is only one well-characterized exception to this rule, the protozoan Plasmodium (Gunderson et al. 1987; Waters, Syin, and McCutchan 1989; Qari et al. 1994). Here we report the 1st case of 18S rDNA polymorphism within a metazoan species. Two types (I and II) of 18S rDNA have been found and sequenced in the platyhelminth Dugesia (Schmidtea) mediterranea (Turbellaria, Seriata, Tricladida). Southern blot analysis suggested that both types of rDNA are present in the genome of this flatworm. This was confirmed through sequence comparisons and phylogenetic analysis using the neighbor-joining method and bootstrap test. Although secondary structure analysis suggests that both types are functional, only type I seems to be transcribed to RNA, as demonstrated by Northern blot analysis. The finding of different types of 18S rDNAs in a single genome stresses the need for analyzing a large number of clones whenever 18S sequences obtained by PCR amplification and cloning are being used in phylogenetic reconstruction.

CytR Is a Global Positive Regulator of Competence, Type VI Secretion, and Chitinases in Vibrio cholerae.

Directory of Open Access Journals (Sweden)

Samit S Watve

Full Text Available The facultative pathogen Vibrio cholerae transitions between its human host and aquatic reservoirs where it colonizes chitinous surfaces. Growth on chitin induces expression of chitin utilization genes, genes involved in DNA uptake by natural transformation, and a type VI secretion system that allows contact-dependent killing of neighboring bacteria. We have previously shown that the transcription factor CytR, thought to primarily regulate the pyrimidine nucleoside scavenging response, is required for natural competence in V. cholerae. Through high-throughput RNA sequencing (RNA-seq, we show that CytR positively regulates the majority of competence genes, the three type VI secretion operons, and the four known or predicted chitinases. We used transcriptional reporters and phenotypic analysis to determine the individual contributions of quorum sensing, which is controlled by the transcription factors HapR and QstR; chitin utilization that is mediated by TfoX; and pyrimidine starvation that is orchestrated by CytR, toward each of these processes. We find that in V. cholerae, CytR is a global regulator of multiple behaviors affecting fitness and adaptability in the environment.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 1: The value of scientific and technical information (STI), its relationship to Research and Development (R/D), and its use by US aerospace engineers and scientists

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Glassman, Myron; Oliu, Walter E.

1990-01-01

This paper is based on the premise that scientific and technical information (STI), its use by aerospace engineers and scientists, and the aerospace research and development (R&D) process are related. We intend to support this premise with data gathered from numerous studies concerned with STI, the relationship of STI to the performance and management of R&D activities, and the information use and seeking behavior of engineers in general and aerospace engineers and scientists in particular. We intend to develop and present a synthesized appreciation of how aerospace R&D managers can improve the efficacy of the R&D process by understanding the role and value of STI in this process.

R5 strains of human immunodeficiency virus type 1 from rapid progressors lacking X4 strains do not possess X4-type pathogenicity in human thymus

NARCIS (Netherlands)

Berkowitz, R. D.; van't Wout, A. B.; Kootstra, N. A.; Moreno, M. E.; Linquist-Stepps, V. D.; Bare, C.; Stoddart, C. A.; Schuitemaker, H.; McCune, J. M.

1999-01-01

Some individuals infected with only R5 strains of human immunodeficiency virus type 1 progress to AIDS as quickly as individuals harboring X4 strains. We determined that three R5 viruses were much less pathogenic than an X4 virus in SCID-hu Thy/Liv mice, suggesting that R5 virus-mediated rapid

An experimental study on the performance of the moving regenerator for a γ-type twin power piston Stirling engine

International Nuclear Information System (INIS)

Chen, Wen-Lih; Wong, King-Leung; Chen, Hung-En

2014-01-01

Highlights: • Stacked-woven metal screens have been used as regenerator matrix materials. • Copper has been found as a superior regenerator matrix material than stainless steel. • Working gas flow direction has to be normal to screen surface to produce good engine performance. • Pressure drop through the regenerator plays a very important role on performance. • There exists an optimal fill factor. - Abstract: In this paper, a helium charge γ-type twin power piston Stirling engine has been studied experimentally to understand the effects of several regenerator parameters on the overall performance of the engine. The regenerator incorporated in this engine is a moving regenerator which is housed inside the displacer of the engine, and the parameters investigated include regenerator matrix material, matrices arrangement, matrix wire diameter, and fill factor. Stacked-woven metal screens have been used as regenerator matrix materials. The results include engine shaft torque, power, and efficiency versus engine speed at several engine’s hot-end temperatures. It is found that all parameters pose significant impact on engine performance. Copper is a superior regenerator material than stainless steel for the current engine; regenerator matrix screens have to be installed in a manner that the working-gas-flow direction is normal to the surface of matrix screens; very small wire diameter results in large pressure drop and reduce regenerator effectiveness; and there exists an optimal fill factor. The study offers some important information for the design of moving regenerator in a γ-type Stirling engine

Linking Maternal and Somatic 5S rRNA types with Different Sequence-Specific Non-LTR Retrotransposons

NARCIS (Netherlands)

Locati, M.D.; Pagano, J.F.B.; Ensink, W.A.; van Olst, M.; van Leeuwen, S.; Nehrdich, U.; Zhu, K.; Spaink, H.P.; Girard, G.; Rauwerda, H.; Jonker, M.J.; Dekker, R.J.; Breit, T.M.

5S rRNA is a ribosomal core component, transcribed from many gene copies organized in genomic repeats. Some eukaryotic species have two 5S rRNA types defined by their predominant expression in oogenesis or adult tissue. Our next-generation sequencing study on zebrafish egg, embryo and adult tissue,

Reliability Engineering

International Nuclear Information System (INIS)

Lee, Sang Yong

1992-07-01

This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

Thermodynamic analysis of a gamma type Stirling engine in an energy recovery system.

Science.gov (United States)

Sowale, Ayodeji; Kolios, Athanasios J; Fidalgo, Beatriz; Somorin, Tosin; Parker, Alison; Williams, Leon; Collins, Matt; McAdam, Ewan; Tyrrel, Sean

2018-06-01

The demand for better hygiene has increased the need for developing more effective sanitation systems and facilities for the safe disposal of human urine and faeces. Non-Sewered Sanitary systems are considered to be one of the promising alternative solutions to the existing flush toilet system. An example of these systems is the Nano Membrane Toilet (NMT) system being developed at Cranfield University, which targets the safe disposal of human waste while generating power and recovering water. The NMT will generate energy from the conversion of human waste with the use of a micro-combustor; the heat produced will power a Stirling engine connected to a linear alternator to generate electricity. This study presents a numerical investigation of the thermodynamic analysis and operational characteristics of a quasi steady state model of the gamma type Stirling engine integrated into a combustor in the back end of the NMT system. The effects of the working gas, at different temperatures, on the Stirling engine performance are also presented. The results show that with the heater temperature of 390 °C from the heat supply via conduction at 820 W from the flue gas, the Stirling engine generates a daily power output of 27 Wh/h at a frequency of 23.85 Hz.

Kentucky DOE-EPSCoR Program

Energy Technology Data Exchange (ETDEWEB)

Stencel, J.M.; Ochsenbein, M.P.

2003-04-14

The KY DOE EPSCoR Program included efforts to impact positively the pipeline of science and engineering students and to establish research, education and business infrastructure, sustainable beyond DOE EPSCoR funding.

A thermodynamic approach to compare the performance of rhombic-drive and crank-drive mechanisms for a beta-type Stirling engine

International Nuclear Information System (INIS)

Aksoy, F.; Solmaz, H.; Karabulut, H.; Cinar, C.; Ozgoren, Y.O.; Polat, Seyfi

2016-01-01

Highlights: • Rhombic drive and crank drive mechanisms of a beta type engine were compared. • Nodal analysis method was used to compare engines having different drive mechanism. • Maximum specific power was 1410 W/L for rhombic-drive engine. • Heat transfer coefficient was determined as 475 W/m"2K for rhombic-drive engine. • Rhombic drive provided higher efficiency because of its better kinematic behaviours. - Abstract: In this study, the effect of rhombic drive and crank drive mechanisms on the performance of a beta-type Stirling engine was investigated by nodal analysis. Kinematic and thermodynamic relations for both drive mechanisms were introduced and a Fortran code was written for the solution. Piston strokes, cylinder and displacer diameters, hot and cold end temperatures, regenerator volumes and heat transfer surface areas were taken equal for both engines with two different drive mechanisms. In the analysis, air was used as the working gas. Engine power and efficiency were compared for different charge pressure values, working gas mass values, heat transfer coefficients and hot end temperatures. Maximum specific engine power was 1410 W/L for the engine with rhombic drive mechanism and 1200 W/L for the engine with crank drive mechanism at 4 bars of charge pressure and 500 W/m"2K heat transfer coefficient. Rhombic drive mechanism was relatively advantageous at low working gas mass values and high hot end temperatures. In comparison with the engine having rhombic drive mechanism, the relatively poor kinematic behaviour of the engine having crank drive mechanism caused lower engine efficiency and performance. Heat transfer coefficient was also predicted by using an experimental pressure trace.

77 FR 16916 - Airworthiness Directives; Pratt & Whitney (PW)Turbofan Engines

Science.gov (United States)

2012-03-23

... Airworthiness Directives; Pratt & Whitney (PW)Turbofan Engines AGENCY: Federal Aviation Administration (FAA... and -7R4H1 turbofan engines. This AD was prompted by the determination that a new lower life limit for... PW JT9D-7R4G2 and -7R4H1 turbofan engine models. We agree. In addition to the JT9D-7R4G2 and -7R4H1...

Mechanical Properties Experimental Study of Engineering Vehicle Refurbished Tire

Science.gov (United States)

Qiang, Wang; Xiaojie, Qi; Zhao, Yang; Yunlong, Wang; Guotian, Wang; Degang, Lv

2018-05-01

The vehicle refurbished tire test system was constructed, got load-deformation, load-stiffness, and load-compression ratio property laws of engineering vehicle refurbished tire under the working condition of static state and ground contact, and built radial direction loading deformation mathematics model of 26.5R25 engineering vehicle refurbished tire. The test results show that radial-direction and side-direction deformation value is a little less than that of the new tire. The radial-direction stiffness and compression ratio of engineering vehicle refurbished tire were greatly influenced by radial-direction load and air inflation pressure. When load was certain, radial-direction stiffness would increase with air inflation pressure increasing. When air inflation pressure was certain, compression ratio of engineering vehicle refurbished tire would enlarge with radial-direction load increasing, which was a little less than that of the new and the same type tire. Aging degree of old car-case would exert a great influence on deformation property of engineering vehicle refurbished tire, thus engineering vehicle refurbished tires are suitable to the working condition of low tire pressure and less load.

R and M considerations in the selection of class 3 emergency power system for Candu-type nuclear power station

Energy Technology Data Exchange (ETDEWEB)

Hashmi, M F; Eng, P [Canatom LTD, Montreal, P.Q. (Canada)

1975-07-01

Reliability of emergency power system is an important consideration in the design of Electrical Power Supplies for any power station. Some other factors enter in the picture depending on the requirements for the safe shutdown of the nuclear reactor. A Reliability and Maintainability (R and M) comparison is drawn between diesel engines and gas turbines to make a choice of the prime mover for the generator. The type and amount of redundancy of the generator sets is then investigated to establish high reliability. Effects of automatic interconnections between class III buses, generator groupings and synchronization is taken into account. Next, failure modes of the systems are considered and methods are sought to reduce the significant failure modes. Recommendations are made to improve the system at design and specification stage. Economics and maintainability are given due consideration throughout the unit selection, system analysis and improvement. Two-100 pc generators are considered against four-50 pc generators; in both cases, the generators form two independent groups of 100 pc capability.

Constraining the Type of Central Engine of GRBs with Swift Data

Science.gov (United States)

Li, Liang; Wu, Xue-Feng; Lei, Wei-Hua; Dai, Zi-Gao; Lian, En-Wei; Ryde, Felix

2018-06-01

The central engine of gamma-ray bursts (GRBs) is poorly constrained. There exist two main candidates: a fast-rotating black hole and a rapidly spinning magnetar. Furthermore, X-ray plateaus are widely accepted to be the energy injection into the external shock. In this paper, we systematically analyze the Swift/XRT light curves of 101 GRBs having plateau phases and known redshifts (before 2017 May). Since a maximum energy budget (∼2 × 1052 erg) exists for magnetars but not for black holes, this provides a good clue to identifying the type of GRB central engine. We calculate the isotropic kinetic energy E K,iso and the isotropic X-ray energy release E X,iso for individual GRBs. We identify three categories based on how likely a black hole harbors a central engine: “Gold” (9 out of 101; both E X,iso and E K,iso exceed the energy budget), “Silver” (69 out of 101; E X,iso less than the limit but E K,iso greater than the limit), and “Bronze” (23 out of 101; the energies are not above the limit). We then derive and test the black hole parameters with the Blandford–Znajek mechanism, and find that the observations of the black hole candidate (“Gold” + “Silver”) samples are consistent with the expectations of the black hole model. Furthermore, we also test the magnetar candidate (“Bronze”) sample with the magnetar model, and find that the magnetar surface magnetic field (B p ) and initial spin period (P 0) fall into reasonable ranges. Our analysis indicates that if the magnetar wind is isotropic, a magnetar central engine is possible for 20% of the analyzed GRBs. For most GRBs, a black hole is most likely operating.

Engineering Task Plan for Preparing the Type 4 In Situ Vapor Samplers (ISVS) for Use

International Nuclear Information System (INIS)

BOGER, R.M.

2000-01-01

The DOE has identified a need to sample vapor space and exhaust ducts of several waste tanks The In-Situ Vapor Sampling (ISVS) Type IV vapor sampling cart has been identified as the appropriate monitoring tool. The ISVS carts have been out of service for a number of years. This ETP outlines the work to be performed to ready the type IV gas sampler for operation Characterization Engineering will evaluate the Type IV gas sampler carts to determine their state of readiness and will proceed to update procedures and equipment documentation to make the sampler operationally acceptable

A CFD parametric study on the performance of a low-temperature-differential γ-type Stirling engine

International Nuclear Information System (INIS)

Chen, Wen-Lih; Yang, Yu-Ching; Salazar, Jose Leon

2015-01-01

Highlights: • A parametric study on a low-temperature-differential Stirling engine has been conducted by using CFD. • The effects of three geometric and two operational parameters on engine performance have been investigated. • It is found that each parameter produces different effects except power piston stroke and power piston radius. • The results are useful for guiding the design of new low-temperature-differential Stirling engines. - Abstract: An in-house CFD code has been applied to a low-temperature-differential (LTD) γ-type Stirling engine to understand the effects posed by several geometrical and operational parameters on engine performance. The results include variations of pressure, temperature, and heat transfer rates within an engine cycle as well as variations of engine’s power and efficiency versus these parameters. It is found that power piston stroke and radius influence engine performance very similarly, and power and efficiency both increase as these two parameters increase. In fact, the effects of the two parameters can be assimilated into those by the parameter of compression ratio. The stroke of displacer is observed to affect strongly on heat input but weakly on power, thus causing the efficiency to decrease as it increases. As expected, both power and efficiency increase as temperature difference between the hot and cold ends increases. Lastly, engine speed is observed to pose strong positive effects on power but exert weak effects on efficiency. This study reveals the effects produced by several important parameters on engine performance, and such information is very useful for the design of new LTD Stirling engines.

Glycosylation Engineering

DEFF Research Database (Denmark)

Clausen, Henrik; Wandall, Hans H.; Steentoft, Catharina

2017-01-01

Knowledge of the cellular pathways of glycosylation across phylogeny provides opportunities for designing glycans via genetic engineering in a wide variety of cell types including bacteria, fungi, plant cells, and mammalian cells. The commercial demand for glycosylation engineering is broad......, including production of biological therapeutics with defined glycosylation (Chapter 57). This chapter describes how knowledge of glycan structures and their metabolism (Parts I–III of this book) has led to the current state of glycosylation engineering in different cell types. Perspectives for rapid...

Nonlinear Regression with R

CERN Document Server

Ritz, Christian; Parmigiani, Giovanni

2009-01-01

R is a rapidly evolving lingua franca of graphical display and statistical analysis of experiments from the applied sciences. This book provides a coherent treatment of nonlinear regression with R by means of examples from a diversity of applied sciences such as biology, chemistry, engineering, medicine and toxicology.

Foundations for a new type of Design-Engineers

DEFF Research Database (Denmark)

Jørgensen, Ulrik; Brodersen, Søsser; Lindegaard, Hanne

2011-01-01

almost equally in the curriculum: natural and technical sciences, design synthesis and socio-technical analysis. Combined with an integration and co-ordination of disciplines, a series of projects providing a progression of challenges to the students⿿ learning, and a focus on the outcomes of the learning...... processes of competences needed in design engineering, the curriculum represents a radical innovation in engineering curriculum. The paper describes the background as well as the foundational elements constituting the educational program and presents an assessment of the key factors that has made it attract......Since 2002 a new design-engineering education has been organized at the Technical University of Denmark. It fulfils most of the requirements in the CDIO concept but builds in addition on a change in what is considered core disciplines in engineering as three fields of knowledge are represented...

Reverse engineering of wörner type drilling machine structure.

Science.gov (United States)

Wibowo, A.; Belly, I.; llhamsyah, R.; Indrawanto; Yuwana, Y.

2018-03-01

A product design needs to be modified based on the conditions of production facilities and existing resource capabilities without reducing the functional aspects of the product itself. This paper describes the reverse engineering process of the main structure of the wörner type drilling machine to obtain a machine structure design that can be made by resources with limited ability by using simple processes. Some structural, functional and the work mechanism analyzes have been performed to understand the function and role of each basic components. The process of dismantling of the drilling machine and measuring each of the basic components was performed to obtain sets of the geometry and size data of each component. The geometric model of each structure components and the machine assembly were built to facilitate the simulation process and machine performance analysis that refers to ISO standard of drilling machine. The tolerance stackup analysis also performed to determine the type and value of geometrical and dimensional tolerances, which could affect the ease of the components to be manufactured and assembled

Internet Search Engines

OpenAIRE

Fatmaa El Zahraa Mohamed Abdou

2004-01-01

A general study about the internet search engines, the study deals main 7 points; the differance between search engines and search directories, components of search engines, the percentage of sites covered by search engines, cataloging of sites, the needed time for sites appearance in search engines, search capabilities, and types of search engines.

The oxidation of alkylaryl sulfides and benzo[b]thiophenes by Escherichia coli cells expressing wild-type and engineered styrene monooxygenase from Pseudomonas putida CA-3.

Science.gov (United States)

Nikodinovic-Runic, Jasmina; Coulombel, Lydie; Francuski, Djordje; Sharma, Narain D; Boyd, Derek R; Ferrall, Rory Moore O; O'Connor, Kevin E

2013-06-01

Nine different sulfur-containing compounds were biotransformed to the corresponding sulfoxides by Escherichia coli Bl21(DE3) cells expressing styrene monooxygenase (SMO) from Pseudomonas putida CA-3. Thioanisole was consumed at 83.3 μmoles min(-1) g cell dry weight(-1) resulting mainly in the formation of R-thioanisole sulfoxide with an enantiomeric excess (ee) value of 45 %. The rate of 2-methyl-, 2-chloro- and 2-bromo-thioanisole consumption was 2-fold lower than that of thioanisole. Surprisingly, the 2-methylthioanisole sulfoxide product had the opposite (S) configuration to that of the other 2-substituted thioanisole derivatives and had a higher ee value (84 %). The rate of oxidation of 4-substituted thioanisoles was higher than the corresponding 2-substituted substrates but the ee values of the products were consistently lower (10-23 %). The rate of benzo[b]thiophene and 2-methylbenzo[b]thiophene sulfoxidation was approximately 10-fold lower than that of thioanisole. The ee value of the benzo[b]thiophene sulfoxide could not be determined as the product racemized rapidly. E. coli cells expressing an engineered SMO (SMOeng R3-11) oxidised 2-substituted thioanisoles between 1.8- and 2.8-fold faster compared to cells expressing the wild-type enzyme. SMOeng R3-11 oxidised benzo[b]thiophene and 2-methylbenzo[b]thiophene 10.1 and 5.6 times faster that the wild-type enzyme. The stereospecificity of the reaction catalysed by SMOeng was unchanged from that of the wild type. Using the X-ray crystal structure of the P. putida S12 SMO, it was evident that the entrance of substrates into the SMO active site is limited by the binding pocket bottleneck formed by the side chains of Val-211 and Asn-46 carboxyamide group.

2R and remodeling of vertebrate signal transduction engine

Directory of Open Access Journals (Sweden)

Huminiecki Lukasz

2010-12-01

Full Text Available Abstract Background Whole genome duplication (WGD is a special case of gene duplication, observed rarely in animals, whereby all genes duplicate simultaneously through polyploidisation. Two rounds of WGD (2R-WGD occurred at the base of vertebrates, giving rise to an enormous wave of genetic novelty, but a systematic analysis of functional consequences of this event has not yet been performed. Results We show that 2R-WGD affected an overwhelming majority (74% of signalling genes, in particular developmental pathways involving receptor tyrosine kinases, Wnt and transforming growth factor-β ligands, G protein-coupled receptors and the apoptosis pathway. 2R-retained genes, in contrast to tandem duplicates, were enriched in protein interaction domains and multifunctional signalling modules of Ras and mitogen-activated protein kinase cascades. 2R-WGD had a fundamental impact on the cell-cycle machinery, redefined molecular building blocks of the neuronal synapse, and was formative for vertebrate brains. We investigated 2R-associated nodes in the context of the human signalling network, as well as in an inferred ancestral pre-2R (AP2R network, and found that hubs (particularly involving negative regulation were preferentially retained, with high connectivity driving retention. Finally, microarrays and proteomics demonstrated a trend for gradual paralog expression divergence independent of the duplication mechanism, but inferred ancestral expression states suggested preferential subfunctionalisation among 2R-ohnologs (2ROs. Conclusions The 2R event left an indelible imprint on vertebrate signalling and the cell cycle. We show that 2R-WGD preferentially retained genes are associated with higher organismal complexity (for example, locomotion, nervous system, morphogenesis, while genes associated with basic cellular functions (for example, translation, replication, splicing, recombination; with the notable exception of cell cycle tended to be excluded. 2R

miR-17-92 expression in differentiated T cells - implications for cancer immunotherapy

Directory of Open Access Journals (Sweden)

Martinson Jeremy

2010-02-01

Full Text Available Abstract Background Type-1 T cells are critical for effective anti-tumor immune responses. The recently discovered microRNAs (miRs are a large family of small regulatory RNAs that control diverse aspects of cell function, including immune regulation. We identified miRs differentially regulated between type-1 and type-2 T cells, and determined how the expression of such miRs is regulated. Methods We performed miR microarray analyses on in vitro differentiated murine T helper type-1 (Th1 and T helper type-2 (Th2 cells to identify differentially expressed miRs. We used quantitative RT-PCR to confirm the differential expression levels. We also used WST-1, ELISA, and flow cytometry to evaluate the survival, function and phenotype of cells, respectively. We employed mice transgenic for the identified miRs to determine the biological impact of miR-17-92 expression in T cells. Results Our initial miR microarray analyses revealed that the miR-17-92 cluster is one of the most significantly over-expressed miR in murine Th1 cells when compared with Th2 cells. RT-PCR confirmed that the miR-17-92 cluster expression was consistently higher in Th1 cells than Th2 cells. Disruption of the IL-4 signaling through either IL-4 neutralizing antibody or knockout of signal transducer and activator of transcription (STAT6 reversed the miR-17-92 cluster suppression in Th2 cells. Furthermore, T cells from tumor bearing mice and glioma patients had decreased levels of miR-17-92 when compared with cells from non-tumor bearing counterparts. CD4+ T cells derived from miR-17-92 transgenic mice demonstrated superior type-1 phenotype with increased IFN-γ production and very late antigen (VLA-4 expression when compared with counterparts derived from wild type mice. Human Jurkat T cells ectopically expressing increased levels of miR-17-92 cluster members demonstrated increased IL-2 production and resistance to activation-induced cell death (AICD. Conclusion The type-2-skewing

Differential gene expression in Neurospora crassa cell types: heterogeneity and amplification of rRNA genes. Progress report, July 1980-June 30, 1981

International Nuclear Information System (INIS)

Dutta, S.K.

1981-01-01

The significant results obtained during 1980-1981 year of the current research program are as follows: I. Studies on heterogeneity of multiple copies of rDNAs from N. crassa cell types are being continued, such as: (1) Autoradiographs of Southern transfers of EcoR 1 restricted fragments of nuclear DNA from conidia, germinated conidia (sprouts) and mycelia of N. crassa were compared after hybridization with 32 P-rDNA probe. The nuclear DNA of two hours sprout and of 16 hours mycelia gave similar hybridization patterns with EcoR 1 digest, but no such hybridization pattern was evident in conidial DNA digest; (2) Procedure for concentration of rDNAs from Neurospora species and cell types was standardized; restriction analysis of purified rDNAs is being done; (3) 35S total rDNA clone, 17S rDNA clone and 26S rDNA subclone are being used to see gross differences in the precursor rRNAs of different cell types; (4) Comparison of DNA:DNA homologies of rRNA genes with different Neurospora species. II. Post-mitochondrial DNAs of N. crassa are found to be rDNA-like and were further characterized by electron microscopic studies and are found to be approximately twice the size of SV-40 DNAs. These N. crassa post-mitochondrial DNAs hybridized with 32 P-labeled N. crassa nuclear DNAs. III. Previous studies on differential RNase sensitive DNA polymerase activity in N. Crassa cell types and on evolution of sexual morphogenesis in the genus Neurospora are completed and published. RNase sensitive DNA polymerase activity is found to be in the post-mitochondrial fraction. Heterothallism in the genus Neurospora is evolved from homothallism

Current status of rocket developments in universities -development of a small hybrid rocket with a swirling oxidizer flow type engine

OpenAIRE

Yuasa, Saburo; Kitagawa, Koki

2005-01-01

To develop an experimental small hybrid rocket with a swirling gaseous oxygen flow type engine, we made a flight model engine. Burning tests of the engine showed that a maximum thrust of 692 N and a specific impulse of 263 s (at sea level) were achieved. We designed a small hybrid rocket with this engine. The rocket measured 1.8 m in length and 15.4 kg in mass. To confirm the flight stability of the rocket, wind tunnel tests using a 112-scale model of the rocket and simulations of the flight ...

Stirling Engine with Unidirectional Gas Flow

OpenAIRE

Blumbergs, Ilmars

2014-01-01

In this study, a Stirling engine with unidirectional gas flow configuration of beta type Stirling engine is described and studied from kinematic and thermodynamics points of view. Some aspects of the Stirling engine with unidirectional gas flow engine are compared to classic beta type Stirling engines. The aim of research has been to develop a new type of Stirling engine, using SolidWorks 3D design software and Flow Simulation software. In the development process, special attention has been d...

76 FR 73489 - Airworthiness Directives; Honeywell International Inc. Turbofan Engines

Science.gov (United States)

2011-11-29

... Airworthiness Directives; Honeywell International Inc. Turbofan Engines AGENCY: Federal Aviation Administration...-1F, and LF507-IH turbofan engines. This AD requires removing from service certain second stage high... International Inc. ALF502L-2C, ALF502R-3, ALF502R-3A, ALF502R-5, LF507-1F, and LF507-IH turbofan engines, with...

Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering.

Science.gov (United States)

Gautam, Sneh; Chou, Chia-Fu; Dinda, Amit K; Potdar, Pravin D; Mishra, Narayan C

2014-01-01

In the present study, a tri-polymer polycaprolactone (PCL)/gelatin/collagen type I composite nanofibrous scaffold has been fabricated by electrospinning for skin tissue engineering and wound healing applications. Firstly, PCL/gelatin nanofibrous scaffold was fabricated by electrospinning using a low cost solvent mixture [chloroform/methanol for PCL and acetic acid (80% v/v) for gelatin], and then the nanofibrous PCL/gelatin scaffold was modified by collagen type I (0.2-1.5wt.%) grafting. Morphology of the collagen type I-modified PCL/gelatin composite scaffold that was analyzed by field emission scanning electron microscopy (FE-SEM), showed that the fiber diameter was increased and pore size was decreased by increasing the concentration of collagen type I. Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis indicated the surface modification of PCL/gelatin scaffold by collagen type I immobilization on the surface of the scaffold. MTT assay demonstrated the viability and high proliferation rate of L929 mouse fibroblast cells on the collagen type I-modified composite scaffold. FE-SEM analysis of cell-scaffold construct illustrated the cell adhesion of L929 mouse fibroblasts on the surface of scaffold. Characteristic cell morphology of L929 was also observed on the nanofiber mesh of the collagen type I-modified scaffold. Above results suggest that the collagen type I-modified PCL/gelatin scaffold was successful in maintaining characteristic shape of fibroblasts, besides good cell proliferation. Therefore, the fibroblast seeded PCL/gelatin/collagen type I composite nanofibrous scaffold might be a potential candidate for wound healing and skin tissue engineering applications. © 2013.

SAPHIR, a simulator for engineering and training on N4-type nuclear power plants

International Nuclear Information System (INIS)

Vovan, C.

1999-01-01

SAPHIR, the new simulator developed by FRAMATOME, has been designed to be a convenient tool for engineering and training for different types of nuclear power plants. Its first application is for the French 'N4' four-loop 1500MWe PWR. The basic features of SAPHIR are: (1) Use of advanced codes for modelling He primary and secondary systems' including an axial steam generator model, (2) Use of a simulation workshop containing different tools for modelling fluid, electrical, instrument and control networks, (3) A Man-Machine Interface designed for an easy and convivial use which can simulate the different computerized control consoles of the 'N4' control room. This paper outlines features and capabilities of this tool, both for engineering and training purposes. (author)

77 FR 1043 - Airworthiness Directives; Honeywell International Inc. Turbofan Engines

Science.gov (United States)

2012-01-09

... International Inc. Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... Honeywell International Inc. TFE731-20R, -20AR, -20BR, -40, -40AR, -40R, -50R, and -60 turbofan engines. (i...

Using Evolution as a Guide to Engineer Kranz-Type C4 photosynthesis

Directory of Open Access Journals (Sweden)

Thomas L. Slewinski

2013-07-01

Full Text Available Kranz-type C4 photosynthesis has independently and rapidly evolved over sixty times to dramatically increase radiation use efficiency in both monocots and eudicots. Indeed, it is one of the most exceptional examples of convergent evolution in the history of life. The repeated and rapid evolution of Kranz-type C4 suggests that it may be a derivative of a conserved developmental pathway that is present in all angiosperms. Here, I argue that the Kranz-type C4 photosynthetic system is an extension of the endodermis/starch sheath, that is normally only found in the roots and stems, into photosynthetic structures such as leaves. Support for this hypothesis was recently provided by a study that showed that the same genetic pathway that gives rise to the endodermis in roots, the SCARECROW/SHORT-ROOT radial pattering system, also regulates the development of Kranz anatomy and C4 physiology in leaves. This new hypothesis for the evolution of Kranz-type C4 photosynthesis has opened new opportunities to explore the underlying genetic networks that regulate the development and physiology of C4 and provides new potential avenues for the engineering of the mechanism into C3 crops.

Effects of chemical equilibrium on turbine engine performance for various fuels and combustor temperatures

Science.gov (United States)

Tran, Donald H.; Snyder, Christopher A.

1992-01-01

A study was performed to quantify the differences in turbine engine performance with and without the chemical dissociation effects for various fuel types over a range of combustor temperatures. Both turbojet and turbofan engines were studied with hydrocarbon fuels and cryogenic, nonhydrocarbon fuels. Results of the study indicate that accuracy of engine performance decreases when nonhydrocarbon fuels are used, especially at high temperatures where chemical dissociation becomes more significant. For instance, the deviation in net thrust for liquid hydrogen fuel can become as high as 20 percent at 4160 R. This study reveals that computer central processing unit (CPU) time increases significantly when dissociation effects are included in the cycle analysis.

Silent cooling system with a double suction type centrifugal fan with backward blades; Ryosuikomi turbo fan wo mochiita teisoon engine reikyaku system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Funabashi, S. [Hitachi, Ltd., Tokyo (Japan); Nakamura, K. [Hitachi Construction Machinery Co. Ltd., Tokyo (Japan)

2000-04-25

We have developed a new cooling system for the engine of construction machinery. This system produces two different air flow routes by a double suction type centrifugal fan with backward blades. We first measured aerodynamic performance and sound level of the double suction type fan, which consists of two single suction type fans of different design, and compared these measurements to those of single suction type fans. Next, we installed the fan in a scale model of the new cooling system. The performance of this double suction type fan was different to that of a single suction type. It is considered that the effect of interaction of the exit flows from the two different fans caused this performance change. The test model installed in an engine compartment showed that this cooling system reduced the area of air inlets and outlets around the engine and did not cause re-circulation of cooling air. (author)

Milestones in software engineering and knowledge engineering history: a comparative review.

Science.gov (United States)

del Águila, Isabel M; Palma, José; Túnez, Samuel

2014-01-01

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because "those who cannot remember the past are condemned to repeat it." This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one.

Automatic sorting of toxicological information into the IUCLID (International Uniform Chemical Information Database) endpoint-categories making use of the semantic search engine Go3R.

Science.gov (United States)

Sauer, Ursula G; Wächter, Thomas; Hareng, Lars; Wareing, Britta; Langsch, Angelika; Zschunke, Matthias; Alvers, Michael R; Landsiedel, Robert

2014-06-01

The knowledge-based search engine Go3R, www.Go3R.org, has been developed to assist scientists from industry and regulatory authorities in collecting comprehensive toxicological information with a special focus on identifying available alternatives to animal testing. The semantic search paradigm of Go3R makes use of expert knowledge on 3Rs methods and regulatory toxicology, laid down in the ontology, a network of concepts, terms, and synonyms, to recognize the contents of documents. Search results are automatically sorted into a dynamic table of contents presented alongside the list of documents retrieved. This table of contents allows the user to quickly filter the set of documents by topics of interest. Documents containing hazard information are automatically assigned to a user interface following the endpoint-specific IUCLID5 categorization scheme required, e.g. for REACH registration dossiers. For this purpose, complex endpoint-specific search queries were compiled and integrated into the search engine (based upon a gold standard of 310 references that had been assigned manually to the different endpoint categories). Go3R sorts 87% of the references concordantly into the respective IUCLID5 categories. Currently, Go3R searches in the 22 million documents available in the PubMed and TOXNET databases. However, it can be customized to search in other databases including in-house databanks. Copyright © 2013 Elsevier Ltd. All rights reserved.

Creep characterization of type 316LN and HT-9 stainless steels by the K-R creep damage model

International Nuclear Information System (INIS)

Kim, Woo Gon; Kim, Sung Ho; Ryu, Woo Seog

2001-01-01

The Kachanov and Rabotnov (K-R) creep damage model was interpreted and applied to type 316LN and HT-9 stainless steels. Seven creep constants of the model, A, B, k, m, λ, γ, and q were determined for type 316LN stainless steel. In order to quantify a damage parameter, the cavity was interruptedly traced during creep for measuring cavity area to be reflected into the damage equation. For type 316LN stainless steel, λ=ε R /ε * and λ f =ε/ε R were 3.1 and increased with creep strain. The creep curve with λ=3.1 depicted well the experimental data to the full lifetime and its damage curve showed a good agreement when γ=24. However for the HT-9 stainless steel, the values of λ and λ f were different as λ=6.2 and λ f =8.5, and their K-R creep curves did not agree with the experimental data. This mismatch in the HT-9 steel was due to the ductile fracture by softening of materials rather than the brittle fracture by cavity growth. The differences of the values in the above steels were attributed to creep ductilities at the secondary and the tertiary creep stages

Structural Basis for the Altered PAM Recognition by Engineered CRISPR-Cpf1.

Science.gov (United States)

Nishimasu, Hiroshi; Yamano, Takashi; Gao, Linyi; Zhang, Feng; Ishitani, Ryuichiro; Nureki, Osamu

2017-07-06

The RNA-guided Cpf1 nuclease cleaves double-stranded DNA targets complementary to the CRISPR RNA (crRNA), and it has been harnessed for genome editing technologies. Recently, Acidaminococcus sp. BV3L6 (AsCpf1) was engineered to recognize altered DNA sequences as the protospacer adjacent motif (PAM), thereby expanding the target range of Cpf1-mediated genome editing. Whereas wild-type AsCpf1 recognizes the TTTV PAM, the RVR (S542R/K548V/N552R) and RR (S542R/K607R) variants can efficiently recognize the TATV and TYCV PAMs, respectively. However, their PAM recognition mechanisms remained unknown. Here we present the 2.0 Å resolution crystal structures of the RVR and RR variants bound to a crRNA and its target DNA. The structures revealed that the RVR and RR variants primarily recognize the PAM-complementary nucleotides via the substituted residues. Our high-resolution structures delineated the altered PAM recognition mechanisms of the AsCpf1 variants, providing a basis for the further engineering of CRISPR-Cpf1. Copyright © 2017 Elsevier Inc. All rights reserved.

Development of an engineering simulator for integral type PWR for nuclear ship

International Nuclear Information System (INIS)

Takahashi, Teruo; Shimazaki, Junya; Nakazawa, Toshio

2000-01-01

JAERI has developed a real-time engineering simulator for the integral type reactor MRX (Marine Reactor X) of power 100 MWt to evaluate the design and operational performance and to study highly automatic operations of a reactor plant. Marine reactor is operated under the conditions of pitching and rolling and load change, in comparison with a reactor for a land-based generating plant. And the MRX has systems with structural features, such as water-filled containment vessel, once-through type steam generator and emergency decay heat removal system. Considerations are paid to take these operational conditions and structural features into the simulation model. It is shown that the simulated results are consistent with the planned design and operational performance, and on the other hand present us some technical issues to be investigated in the design specifications. (author)

Epigenetic modification of miR-10a regulates renal damage by targeting CREB1 in type 2 diabetes mellitus.

Science.gov (United States)

Shan, Qun; Zheng, Guihong; Zhu, Aihua; Cao, Li; Lu, Jun; Wu, Dongmei; Zhang, ZiFeng; Fan, Shaohua; Sun, Chunhui; Hu, Bin; Zheng, Yuanlin

2016-09-01

Emerging evidence has shown that microRNA-mediated gene expression modulation plays a crucial role in the pathogenesis of type 2 diabetes mellitus, but the novel miRNAs involved in type 2 diabetes and its functional regulatory mechanisms still need to be determined. In this study, we assessed the role of miR-10a in extracellular matrix accumulation in the kidney of diabetic mellitus induced by combining administration of chronic high fat diet (HFD) and low dosage of streptozotocin (STZ, 35mg/kg). Here, we found that HFD/STZ administration decreased the level of microRNA (miR-10a) expression in ICR strain mice. Overexpression of miR-10a alleviated the increased ratio of urine albumin-to-creatinine (ACR) ratio of HFD/STZ mice. In contrast, knockdown of miR-10a increased the ratio of kidney ACR in naïve mice. Furthermore, cAMP response element binding protein 1 (CREB1) was validated as a target of miR-10a in vitro and in vivo. CREB1 and its downstream fibronectin (FN, extracellular matrix) were increased in HFD/STZ-treated mice, which was reversed by kidney miR-10a overexpression. The content of CREB1 and FN was increased by miR-10a knockdown in kidney of naïve mice. Furthermore, histone deacetylase 3 (HDAC3) was revealed to be increased in kidney of HFD/STZ mice, accompanied with the augmentation of ACR ratio and FN level. Knockdown of HDAC3 with siRNA significantly caused the increase of miR-10a, resulting in the decrease in CREB1 and FN expression in kidney of HFD/STZ mice. Contrarily, HDAC3 overexpression mediated by lentivirus decreased miR-10a content, and enhanced ACR value, CREB1 and FN formation in naïve mice. Collectively, these results elucidate that HDAC3/miR-10a/CREB1 serves as a new mechanism underlying kidney injury, providing potential therapeutic targets in type 2 diabetes. Copyright © 2016. Published by Elsevier Inc.

Evolution of technology convergence networks in Korea: Characteristics of temporal changes in R&D according to institution type

Science.gov (United States)

Choi, Jae Young; Jeong, Seongkyoon

2018-01-01

This study investigates the temporal changes in development of technology convergence networks by institution type, i.e., public research institute (PRI), university and industry. Using the co-classification of technological domains of patents, we identified technology convergence of Korean patents, which were filed at Korea Intellectual Properties Office (KIPO) from 1997 to 2011. We conducted a network analysis at the technology level to search for the key technology fields and frequent instances of technology convergence. The results show that technology convergence networks have grown significantly in the recent period regardless of the institution type. While industries started to conspicuously engage in technology convergence in the late 1990s, universities or PRIs did not do so until the mid-2000s. This discrepancy in the phase of technology convergence is attributed to the temporal difference in R&D stage (e.g., basic research and commercial product development). Our findings imply that corporal and governmental R&D management decision on promising technology fields will be more effective if the decision makers carefully consider the type of R&D entity in analyzing technological landscapes. PMID:29420574

Evolution of technology convergence networks in Korea: Characteristics of temporal changes in R&D according to institution type.

Science.gov (United States)

Choi, Jae Young; Jeong, Seongkyoon; Jung, Jung-Kyu

2018-01-01

This study investigates the temporal changes in development of technology convergence networks by institution type, i.e., public research institute (PRI), university and industry. Using the co-classification of technological domains of patents, we identified technology convergence of Korean patents, which were filed at Korea Intellectual Properties Office (KIPO) from 1997 to 2011. We conducted a network analysis at the technology level to search for the key technology fields and frequent instances of technology convergence. The results show that technology convergence networks have grown significantly in the recent period regardless of the institution type. While industries started to conspicuously engage in technology convergence in the late 1990s, universities or PRIs did not do so until the mid-2000s. This discrepancy in the phase of technology convergence is attributed to the temporal difference in R&D stage (e.g., basic research and commercial product development). Our findings imply that corporal and governmental R&D management decision on promising technology fields will be more effective if the decision makers carefully consider the type of R&D entity in analyzing technological landscapes.

Software Engineering Education Directory

Science.gov (United States)

1990-04-01

and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

Engineering science as a "Discipline of the particular"? : types of generalization in engineering sciences

NARCIS (Netherlands)

Vries, de M.J.; Poel, van de I.; Goldberg, D.E.

2010-01-01

Literature suggests that in engineering sciences the possibilities to generalize knowledge are more limited than in natural sciences. This is related to the action-oriented nature of engineering sciences and to the role of values. I will discuss the contributions of abstraction and idealization to

Skip cycle system for spark ignition engines: An experimental investigation of a new type working strategy

International Nuclear Information System (INIS)

Kutlar, Osman Akin; Arslan, Hikmet; Calik, Alper T.

2007-01-01

A new type working strategy for spark ignition engine, named skip cycle, is examined. The main idea is to reduce the effective stroke volume of an engine by cutting off fuel injection and spark ignition in some of the classical four stroke cycles. When the cycle is skipped, additionally, a rotary valve is used in the intake to reduce pumping losses in part load conditions. The effect of this strategy is similar to that of variable displacement engines. Alternative power stroke fractions in one cycle and applicability in single cylinder engines are specific advantageous properties of the proposed system. A thermodynamic model, besides experimental results, is used to explain the skip cycle strategy in more detail. This theoretical investigation shows considerable potential to increase the efficiency at part load conditions. Experimental results obtained with this novel strategy show that the throttle valve of the engine opens wider and the minimum spark advance for maximum brake torque decreases in comparison to those of the classical operation system. The brake specific fuel consumption decreases at very low speed and load, while it increases at higher speed and load due to the increased fuel loss within the skipped cycles. In this working mode, the engine operates at lower idle speed without any stability problem; and moreover with less fuel consumption

[TYPING OF LEPTOSPIRA SPP. STRAINS BASED ON 16S rRNA].

Science.gov (United States)

Ostankova, Yu V; Semenov, A V; Stoyanova, N A; Tokarevich, N K; Lyubimova, N E; Petrova, O A; Ananina, Yu V; Petrov, E M

2016-01-01

Comparative typing of Leptospira spp. strain collection based on analysis of 16S RNA fragment. 2 pairs of primers were used for PCR, that jointly flank 1423b.p. sized fragment. Sequences of Leptospira spp. strain 16S rRNA, presented in the international database, were used for phylogenetic analysis. A high similarity, including interspecies, of the 16S fragment in Leptospira spp. strains was shown independently of the source, serovar and serogroup. Heterogeneity of the primary matrix, spontaneous mutations of hotspots and erroneous nucleotide couplings, characteristic for 16S sequence of pathogenic Leptospira spp. strains, are discussed. Molecular-genetic characteristic of certain reference Leptospira spp. strains by 16S sequence is obtained. Results of the studies give evidence on expedience of introduction into clinical practice of identification of Leptospira spp. by 16S sequence directly from the clinical material, that would allow to significantly reduce identification time, dismiss complex type-specific sera and other labor-intensive methods.

Milestones in Software Engineering and Knowledge Engineering History: A Comparative Review

Science.gov (United States)

del Águila, Isabel M.; Palma, José; Túnez, Samuel

2014-01-01

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because “those who cannot remember the past are condemned to repeat it.” This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one. PMID:24624046

Defying stereotypes: the elusive search for a universal model of LysR-type regulation.

Science.gov (United States)

Momany, Cory; Neidle, Ellen L

2012-02-01

LysR-type transcriptional regulators (LTTRs) compose the largest family of homologous regulators in bacteria. Considering their prevalence, it is not surprising that LTTRs control diverse metabolic functions. Arguably, the most unexpected aspect of LTTRs is the paucity of available structural information. Solubility issues are notoriously problematic, and structural studies have only recently begun to flourish. In this issue of Molecular Microbiology, Taylor et al. (2012) present the structure of AphB, a LysR-type regulator of virulence in Vibrio cholerae. This contribution adds significantly to the group of known full-length atomic LTTR structures, which remains small. Importantly, this report also describes an active-form variant. Small conformational changes in the effector-binding domain translate to global reorganization of the DNA-binding domain. Emerging from these results is a model of theme-and-variation among LTTRs rather than a unified regulatory scheme. Despite common structural folds, LTTRs exhibit differences in oligomerization, promoter recognition and communication with RNA polymerase. Such variation mirrors the diversity in sequence and function associated with members of this very large family. © 2012 Blackwell Publishing Ltd.

A GRB and Broad-lined Type Ic Supernova from a Single Central Engine

Science.gov (United States)

Barnes, Jennifer; Duffell, Paul C.; Liu, Yuqian; Modjaz, Maryam; Bianco, Federica B.; Kasen, Daniel; MacFadyen, Andrew I.

2018-06-01

Unusually high velocities (≳0.1c) and correspondingly high kinetic energies have been observed in a subset of Type Ic supernovae (so-called “broad-lined Ic” supernovae; SNe Ic-BL), prompting a search for a central engine model capable of generating such energetic explosions. A clue to the explosion mechanism may lie in the fact that all supernovae that accompany long-duration gamma-ray bursts (GRBs) belong to the SN Ic-BL class. Using a combination of two-dimensional relativistic hydrodynamics and radiation transport calculations, we demonstrate that the central engine responsible for long GRBs can also trigger an SN Ic-BL. We find that a reasonable GRB engine injected into a stripped Wolf–Rayet progenitor produces a relativistic jet with energy ∼1051 erg, as well as an SN whose synthetic light curves and spectra are fully consistent with observed SNe Ic-BL during the photospheric phase. As a result of the jet’s asymmetric energy injection, the SN spectra and light curves depend on viewing angle. The impact of viewing angle on the spectrum is particularly pronounced at early times, while the viewing-angle dependence for the light curves (∼10% variation in bolometric luminosity) persists throughout the photospheric phase.

Identification of branched-chain amino acid aminotransferases active towards (R)-(+)-1-phenylethylamine among PLP fold type IV transaminases.

Science.gov (United States)

Bezsudnova, Ekaterina Yu; Dibrova, Daria V; Nikolaeva, Alena Yu; Rakitina, Tatiana V; Popov, Vladimir O

2018-04-10

New class IV transaminases with activity towards L-Leu, which is typical of branched-chain amino acid aminotransferases (BCAT), and with activity towards (R)-(+)-1-phenylethylamine ((R)-PEA), which is typical of (R)-selective (R)-amine:pyruvate transaminases, were identified by bioinformatics analysis, obtained in recombinant form, and analyzed. The values of catalytic activities in the reaction with L-Leu and (R)-PEA are comparable to those measured for characteristic transaminases with the corresponding specificity. Earlier, (R)-selective class IV transaminases were found to be active, apart from (R)-PEA, only with some other (R)-primary amines and D-amino acids. Sequences encoding new transaminases with mixed type of activity were found by searching for changes in the conserved motifs of sequences of BCAT by different bioinformatics tools. Copyright © 2018 Elsevier B.V. All rights reserved.

Binary self-assembly of highly symmetric DNA nanocages via sticky-end engineering

Institute of Scientific and Technical Information of China (English)

Xiao-Rong Wu; Chen-Wei Wu; Fei Ding; Cheng Tian; Wen Jiang; Cheng-De Mao; Chuan Zhang

2017-01-01

Discrete and symmetric three-dimensional (3D) DNA nanocages have been revoked as excellent candidates for various applications,such as guest component encapsulation and organization (e.g.dye molecules,proteins,inorganic nanoparticles,etc.) to construct new materials and devices.To date,a large variety of DNA nanocages has been synthesized through assembling small individual DNA motifs into predesigned structures in a bottom-up fashion.Most of them rely on the assembly using multiple copies of single type of motifs and a few sophisticated nanostructures have been engineered by co-assembling multi-types of DNA tiles simultaneously.However,the availability of complex DNA nanocages is still limited.Herein,we demonstrate that highly symmetric DNA nanocages consisted of binary DNA pointstar motifs can be easily assembled by deliberately engineering the sticky-end interaction between the component building blocks.As such,DNA nanocages with new geometries,including elongated tetrahedron (E-TET),rhombic dodecahedron (R-DOD),and rhombic triacontahedron (R-TRI) are successfully synthesized.Moreover,their design principle,assembly process,and structural features are revealed by polyacryalmide gel electrophoresis (PAGE),atomic force microscope (AFM) imaging,and cryogenic transmission electron microscope imaging (cryo-TEM) associated with single particle reconstruction.

Epigenetic modification of miR-10a regulates renal damage by targeting CREB1 in type 2 diabetes mellitus

Energy Technology Data Exchange (ETDEWEB)

Shan, Qun, E-mail: shanp@jsnu.edu.cn; Zheng, Guihong, E-mail: ghzhengsd@jsnu.edu.cn; Zhu, Aihua, E-mail: ahzhu@jsnu.edu.cn; Cao, Li, E-mail: 948113717@qq.com; Lu, Jun, E-mail: lu-jun75@163.com; Wu, Dongmei, E-mail: wdm8610@jsnu.edu.cn; Zhang, ZiFeng, E-mail: zhangzifengsuper@jsnu.edu.cn; Fan, Shaohua, E-mail: fshfly@126.com; Sun, Chunhui, E-mail: 306484866@qq.com; Hu, Bin, E-mail: hubin@jsnu.edu.cn; Zheng, Yuanlin, E-mail: ylzheng@jsnu.edu.cn

2016-09-01

Emerging evidence has shown that microRNA-mediated gene expression modulation plays a crucial role in the pathogenesis of type 2 diabetes mellitus, but the novel miRNAs involved in type 2 diabetes and its functional regulatory mechanisms still need to be determined. In this study, we assessed the role of miR-10a in extracellular matrix accumulation in the kidney of diabetic mellitus induced by combining administration of chronic high fat diet (HFD) and low dosage of streptozotocin (STZ, 35 mg/kg). Here, we found that HFD/STZ administration decreased the level of microRNA (miR-10a) expression in ICR strain mice. Overexpression of miR-10a alleviated the increased ratio of urine albumin-to-creatinine (ACR) ratio of HFD/STZ mice. In contrast, knockdown of miR-10a increased the ratio of kidney ACR in naïve mice. Furthermore, cAMP response element binding protein 1 (CREB1) was validated as a target of miR-10a in vitro and in vivo. CREB1 and its downstream fibronectin (FN, extracellular matrix) were increased in HFD/STZ-treated mice, which was reversed by kidney miR-10a overexpression. The content of CREB1 and FN was increased by miR-10a knockdown in kidney of naïve mice. Furthermore, histone deacetylase 3 (HDAC3) was revealed to be increased in kidney of HFD/STZ mice, accompanied with the augmentation of ACR ratio and FN level. Knockdown of HDAC3 with siRNA significantly caused the increase of miR-10a, resulting in the decrease in CREB1 and FN expression in kidney of HFD/STZ mice. Contrarily, HDAC3 overexpression mediated by lentivirus decreased miR-10a content, and enhanced ACR value, CREB1 and FN formation in naïve mice. Collectively, these results elucidate that HDAC3/miR-10a/CREB1 serves as a new mechanism underlying kidney injury, providing potential therapeutic targets in type 2 diabetes. - Highlights: • Diabetes induces the decrease of miR-10a level in the kidney. • MiR-10a overexpression improves kidney damage of diabetes. • MiR-10a targeting CREB1/FN

Epigenetic modification of miR-10a regulates renal damage by targeting CREB1 in type 2 diabetes mellitus

International Nuclear Information System (INIS)

Shan, Qun; Zheng, Guihong; Zhu, Aihua; Cao, Li; Lu, Jun; Wu, Dongmei; Zhang, ZiFeng; Fan, Shaohua; Sun, Chunhui; Hu, Bin; Zheng, Yuanlin

2016-01-01

Emerging evidence has shown that microRNA-mediated gene expression modulation plays a crucial role in the pathogenesis of type 2 diabetes mellitus, but the novel miRNAs involved in type 2 diabetes and its functional regulatory mechanisms still need to be determined. In this study, we assessed the role of miR-10a in extracellular matrix accumulation in the kidney of diabetic mellitus induced by combining administration of chronic high fat diet (HFD) and low dosage of streptozotocin (STZ, 35 mg/kg). Here, we found that HFD/STZ administration decreased the level of microRNA (miR-10a) expression in ICR strain mice. Overexpression of miR-10a alleviated the increased ratio of urine albumin-to-creatinine (ACR) ratio of HFD/STZ mice. In contrast, knockdown of miR-10a increased the ratio of kidney ACR in naïve mice. Furthermore, cAMP response element binding protein 1 (CREB1) was validated as a target of miR-10a in vitro and in vivo. CREB1 and its downstream fibronectin (FN, extracellular matrix) were increased in HFD/STZ-treated mice, which was reversed by kidney miR-10a overexpression. The content of CREB1 and FN was increased by miR-10a knockdown in kidney of naïve mice. Furthermore, histone deacetylase 3 (HDAC3) was revealed to be increased in kidney of HFD/STZ mice, accompanied with the augmentation of ACR ratio and FN level. Knockdown of HDAC3 with siRNA significantly caused the increase of miR-10a, resulting in the decrease in CREB1 and FN expression in kidney of HFD/STZ mice. Contrarily, HDAC3 overexpression mediated by lentivirus decreased miR-10a content, and enhanced ACR value, CREB1 and FN formation in naïve mice. Collectively, these results elucidate that HDAC3/miR-10a/CREB1 serves as a new mechanism underlying kidney injury, providing potential therapeutic targets in type 2 diabetes. - Highlights: • Diabetes induces the decrease of miR-10a level in the kidney. • MiR-10a overexpression improves kidney damage of diabetes. • MiR-10a targeting CREB1/FN

Comparaison des performances moteur à charge homogène et moteur à charge stratifiée Performance Comparison Between a Homogeneous-Charge Engine and a Stratified-Charge Engine.

Directory of Open Access Journals (Sweden)

Raynal B.

2006-11-01

Full Text Available Une évaluation des possibilités théoriques d'amélioration des moteurs actuels, faite par simulation mathématique du fonctionnement d'un moteur à allumage commandé, montre qu'un fonctionnement en mélange homogène pauvre permettrait de réduire de 16 % la consommation sur un cycle ECE chaud. Dans les mêmes conditions d'utilisation, un moteur « à charge stratifiée » idéal donnerait lieu à un gain de 41 %. Des modifications limitées du point de vue technologique ont été apportées à un moteur de série et ont permis d'étendre en mélange pauvre sa zone de fonctionnement. Les gains de consommation réalisés par rapport au moteur standard sont compris entre 5 et 10 %. Le recyclage d'une fraction modérée des gaz d'échappement permet de maintenir les émissions de NO x à moins de 5 g/essai sur cycle ECE, en conservant le gain de consommation précédent. L'analyse des performances d'un moteur Honda CVCC au banc d'essai et sur véhicule montre que les niveaux d'émissions relativement bas de ce type de moteur sont obtenus au prix d'une surconsommation importante par rapport à un véhicule équivalent équipé d'un moteur conventionnel. An evaluation of theoretical possibilities of improving existing engines, obtained by mathematical modelisation of a spark-ignition engine, shows that operating with a homogeneous lean mixture produces a 16 % reduction in consumption for a hot ECE cycle. Under the same running conditions, an ideal strotified-charge engine would produce a gain of 41 %.Limited technological modifications were made in a standard engine sa as ta extend its operating zone using a leon mixture. The consumption gains achieved compared with a standard engine are between 5 and 10%. The recycling of a moderate fraction of the exhaust gases enables NO, emissions ta be maintained at less than 5 g/test for an ECE cycle while preserving the preceding consumption gain.The performance analysis of a Honda C/CC engine on a test

Two piston V-type Stirling engine

Science.gov (United States)

Corey, John A.

1987-01-01

A two piston Stirling engine which includes a heat exchanger arrangement placing the cooler and regenerator directly adjacent the compression space for minimal cold duct volume; a sealing arrangement which eliminates the need for piston seals, crossheads and piston rods; and a simplified power control system.

Improving Customer Satisfaction in an R and D Environment

Science.gov (United States)

Alexander, Anita; Liou, Y. H. Andrew

1998-01-01

Satisfying customer needs is critical to the sustained competitive advantage of service suppliers. It is therefore important to understand the types of customer needs which, if fulfilled or exceeded, add value and contribute to overall customer satisfaction. This study identifies the needs of various research and development (R&D) customers who contract for engineering and design support services. The Quality Function Deployment (QFD) process was used to organize and translate each customer need into performance measures that, if implemented, can improve customer satisfaction. This study also provides specific performance measures that will more accurately guide the efforts of the engineering supplier. These organizations can either implement the QFD methodology presented herein or extract a few performance measures that are specific to the quality dimensions in need of improvement. Listening to 'what' customers talk about is a good first start.

77 FR 14312 - Airworthiness Directives; Honeywell International, Inc. Turbofan Engines

Science.gov (United States)

2012-03-09

... International, Inc. Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... Honeywell International, Inc. ALF502L-2C; ALF502R-3; ALF502R-3A; ALF502R-5; LF507-1F; and LF507-1H turbofan...; ALF502R-3A; ALF502R-5; LF507-1F; and LF507-1H turbofan engines, installed on airplanes of U.S. registry...

77 FR 32009 - Airworthiness Directives; Honeywell International, Inc. Turbofan Engines

Science.gov (United States)

2012-05-31

... Airworthiness Directives; Honeywell International, Inc. Turbofan Engines AGENCY: Federal Aviation Administration... Honeywell International, Inc. ALF502L-2C; ALF502R-3; ALF502R-3A; ALF502R-5; LF507-1F; and LF507-1H turbofan...; ALF502R-3A; ALF502R-5; LF507-1F; and LF507- 1H turbofan engines, installed on airplanes of U.S. registry...

Women in science & engineering and minority engineering scholarships : year 3, report for 2008-2009 activities.

Science.gov (United States)

2009-05-01

Support made scholarships available to minority and women students interested in engineering and science and significantly increased : the number of minority and female students that Missouri S&T can recruit to its science and engineering programs. R...

Tissue-engineered cartilaginous constructs for the treatment of caprine cartilage defects, including distribution of laminin and type IV collagen.

Science.gov (United States)

Jeng, Lily; Hsu, Hu-Ping; Spector, Myron

2013-10-01

The purpose of this study was the immunohistochemical evaluation of (1) cartilage tissue-engineered constructs; and (2) the tissue filling cartilage defects in a goat model into which the constructs were implanted, particularly for the presence of the basement membrane molecules, laminin and type IV collagen. Basement membrane molecules are localized to the pericellular matrix in normal adult articular cartilage, but have not been examined in tissue-engineered constructs cultured in vitro or in tissue filling cartilage defects into which the constructs were implanted. Cartilaginous constructs were engineered in vitro using caprine chondrocyte-seeded type II collagen scaffolds. Autologous constructs were implanted into 4-mm-diameter defects created to the tidemark in the trochlear groove in the knee joints of skeletally mature goats. Eight weeks after implantation, the animals were sacrificed. Constructs underwent immunohistochemical and histomorphometric evaluation. Widespread staining for the two basement membrane molecules was observed throughout the extracellular matrix of in vitro and in vivo samples in a distribution unlike that previously reported for cartilage. At sacrifice, 70% of the defect site was filled with reparative tissue, which consisted largely of fibrous tissue and some fibrocartilage, with over 70% of the reparative tissue bonded to the adjacent host tissue. A novel finding of this study was the observation of laminin and type IV collagen in in vitro engineered cartilaginous constructs and in vivo cartilage repair samples from defects into which the constructs were implanted, as well as in normal caprine articular cartilage. Future work is needed to elucidate the role of basement membrane molecules during cartilage repair and regeneration.

Engineering Sciences Strategic Leadership Plan

Energy Technology Data Exchange (ETDEWEB)

Hahn, Heidi A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-02-14

The purpose of this report is to promote the three key elements of engineering capabilities, staff and engagement in coordination with an R&D investment cycle; and establish an Engineering Steering Council to own and guide this leadership plan.

Modified Peng-Robinson Equation of State for Pure and Mixture Refrigerants with R-32,R-125 and R-134a

Science.gov (United States)

Ll, Jin; Sato, Haruki; Watanabe, Koichi

On the basis of critically-evaluated thermodynamic property data among those recently published, a new Peng-Robinson equation of state for the HFC refrigerants,R-32,R-125 and R-134a,has be end eveloped so as to represent the VLE properties in the vapor-liquid coexisting phase at temperatures 223K-323K. In accord with a challenge to correlate the binary and/or ternary interatction parameters as functions of temperature, we have also applied the present modified Peng-Robinson equation of state to the promising alternative HFC refrigerant mixtures, i.e., R-32/125,R-32/134a and R-32/125/134a systems. The developed equation of state improves significantly its effectiveness for practical engineering property calculations at refrigerantion and air-conditioning industries in comparison with conventional Peng-Robinson equation.

77 FR 51892 - Airworthiness Directives; Honeywell International Inc. Turbofan Engines

Science.gov (United States)

2012-08-28

... Airworthiness Directives; Honeywell International Inc. Turbofan Engines AGENCY: Federal Aviation Administration... Honeywell International Inc. models TFE731-4, -4R, -5, -5R, -5AR, and - 5BR series turbofan engines. This AD... International Inc.: (1) Model TFE731-5 series turbofan engines, with a first stage low-pressure turbine (LPT1...

R+D programme 'Environmental engineering'. R+D projects 1994. Data of September 1, 1994

International Nuclear Information System (INIS)

1994-01-01

Research programmes of the Federal Republic of Germany in the field of environmental engineering are presented. Research is done in the fields of low-emission production processes, environmentally acceptable materials and products, and environmental analysis and measuring instruments. (SR) [de

Engineering i skolen

DEFF Research Database (Denmark)

Auner, Suzie; Daugbjerg, Peer; Nielsen, Keld

Denne didaktik er udarbejdet i forbindelse med projektet “Engineering i skolen” (EiS), som har til formål at bringe engineering ind i naturfagsundervisningen i grundskolen. EiS er et samarbejde mellem Engineer the future, VIA University College, Astra og Naturvidenskabernes Hus, UCC samt lærere fra...... grundskolen ligeledes kan have glæde af at læse med. Didaktikken er blevet til på grundlag af en række forarbejder. Et indledende litteraturstudium dannede udgangspunkt for at opstille nogle principper for en engineering-didaktik, der kan fungere i dansk grundskolekontekst. Sideløbende blev der gennemført en...

Dissecting and engineering of the TetR family regulator SACE_7301 for enhanced erythromycin production in Saccharopolyspora erythraea.

Science.gov (United States)

Wu, Hang; Chen, Meng; Mao, Yongrong; Li, Weiwei; Liu, Jingtao; Huang, Xunduan; Zhou, Ying; Ye, Bang-Ce; Zhang, Lixin; Weaver, David T; Zhang, Buchang

2014-11-13

Saccharopolyspora erythraea was extensively utilized for the industrial-scale production of erythromycin A (Er-A), a macrolide antibiotic commonly used in human medicine. Yet, S. erythraea lacks regulatory genes in the erythromycin biosynthetic gene (ery) cluster, hampering efforts to enhance Er-A production via the engineering of regulatory genes. By the chromosome gene inactivation technique based on homologous recombination with linearized DNA fragments, we have inactivated a number of candidate TetR family transcriptional regulators (TFRs) and identified one TFR (SACE_7301) positively controlling erythromycin biosynthesis in S. erythraea A226. qRT-PCR and EMSA analyses demonstrated that SACE_7301 activated the transcription of erythromycin biosynthetic gene eryAI and the resistance gene ermE by interacting with their promoter regions with low affinities, similar to BldD (SACE_2077) previously identified to regulate erythromycin biosynthesis and morphological differentiation. Therefore, we designed a strategy for overexpressing SACE_7301 with 1 to 3 extra copies under the control of PermE* in A226. Following up-regulated transcriptional expression of SACE_7301, eryAI and ermE, the SACE_7301-overexpressed strains all increased Er-A production over A226 proportional to the number of copies. Likewise, when SACE_7301 was overexpressed in an industrial S. erythraea WB strain, Er-A yields of the mutants WB/7301, WB/2×7301 and WB/3×7301 were respectively increased by 17%, 29% and 42% relative to that of WB. In a 5 L fermentor, Er-A accumulation increased to 4,230 mg/L with the highest-yield strain WB/3×7301, an approximately 27% production improvement over WB (3,322 mg/L). We have identified and characterized a TFR, SACE_7301, in S. erythraea that positively regulated erythromycin biosynthesis, and overexpression of SACE_7301 in wild-type and industrial S. erythraea strains enhanced Er-A yields. This study markedly improves our understanding of the unusual

77 FR 9868 - Airworthiness Directives; Honeywell International Inc. Turbofan Engines

Science.gov (United States)

2012-02-21

... Airworthiness Directives; Honeywell International Inc. Turbofan Engines AGENCY: Federal Aviation Administration... -5BR series turbofan engines. This proposed AD was prompted by a report of a rim/web separation of a..., -4R, -5AR, -5BR, and -5R series turbofan engines, with an LPT1 rotor assembly, P/N 3074748-4, 3074748...

Dysregulated miR-127-5p contributes to type II collagen degradation by targeting matrix metalloproteinase-13 in human intervertebral disc degeneration.

Science.gov (United States)

Hua, Wen-Bin; Wu, Xing-Huo; Zhang, Yu-Kun; Song, Yu; Tu, Ji; Kang, Liang; Zhao, Kang-Cheng; Li, Shuai; Wang, Kun; Liu, Wei; Shao, Zeng-Wu; Yang, Shu-Hua; Yang, Cao

2017-08-01

Intervertebral disc degeneration (IDD) is a chronic disease associated with the degradation of extracellular matrix (ECM). Matrix metalloproteinase (MMP)-13 is a major enzyme that mediates the degradation of ECM components. MMP-13 has been predicted to be a potential target of miR-127-5p. However, the exact function of miR-127-5p in IDD is still unclear. We designed this study to evaluate the correlation between miR-127-5p level and the degeneration of human intervertebral discs and explore the potential mechanisms. miR-127-5p levels and MMP-13 mRNA levels were detected by quantitative real-time polymerase chain reaction (qPCR). To determine whether MMP-13 is a target of miR-127-5p, dual luciferase reporter assays were performed. miR-127-5p mimic and miR-127-5p inhibitor were used to overexpress or downregulate miR-127-5p expression in human NP cells, respectively. Small interfering RNA (siRNA) was used to knock down MMP-13 expression in human NP cells. Type II collagen expression in human NP cells was detected by qPCR, western blotting, and immunofluorescence staining. We confirmed that miR-127-5p was significantly downregulated in nucleus pulposus (NP) tissue of degenerative discs and its expression was inversely correlated with MMP-13 mRNA levels. We reveal that MMP-13 may act as a target of miR-127-5p. Expression of miR-127-5p was inversely correlated with type II collagen expression in human NP cells. Moreover, suppression of MMP-13 expression by siRNA blocked downstream signaling and increased type II collagen expression. Dysregulated miR-127-5p contributed to the degradation of type II collagen by targeting MMP-13 in human IDD. Our findings highlight that miR-127-5p may serve as a new therapeutic target in IDD. Copyright © 2017 Elsevier B.V. and Société Française de Biochimie et Biologie Moléculaire (SFBBM). All rights reserved.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 12: The diffusion of federally funded aerospace research and development (R/D) and the information seeking behavior of US aerospace engineers and scientists

Science.gov (United States)

Pinelli, Thomas E.; Kennedy, John M.; Barclay, Rebecca O.

1991-01-01

In this paper, the diffusion of federally funded aerospace R&D is explored from the perspective of the information-seeking behavior of U.S. aerospace engineers and scientists. The following three assumptions frame this exploration: (1) knowledge production, transfer, and utilization are equally important components of the aerospace R&D process; (2) the diffusion of knowledge resulting from federally funded aerospace R&D is indispensable for the U.S. to remain a world leader in aerospace; and (3) U.S. government technical reports, produced by NASA and DOD, play an important, but as yet undefined, role in the diffusion of federally funded aerospace R&D. A conceptual model for federally funded aerospace knowledge diffusion, one that emphasizes U.S. goverment technical reports, is presented. Data regarding three research questions concerning the information-seeking behavior of U.S. aerospace engineers and scientists are also presented.

A meta-analysis of associations of LEPR Q223R and K109R polymorphisms with Type 2 diabetes risk

Science.gov (United States)

Yang, Yunzhong

2018-01-01

Background Leptin receptor (LEPR) plays a pivotal role in the control of body weight, energy metabolism, and insulin sensitivity. Various genetic association studies were performed to evaluate associations of LEPR genetic variants with type 2 diabetes (T2D) susceptibility. Methods A comprehensive search was conducted to identify all eligible case-control studies for examining the associations of LEPR single nucleotide polymorphisms (SNPs) Q223R (rs1137101) and K109R (rs1137100) with T2D risk. Odds ratios (OR) and corresponding 95% confidence intervals (CIs) were used to measure the magnitudes of association. Results For Q223R, 13 studies (11 articles) consisting of a total of 4030 cases and 2844 controls, and for K109R 7 studies (7 articles) consisting of 3319 cases and 2465 controls were available. Under an allele model, Q223R was not significantly associated with T2D risk (OR = 1.09, 95% CI: 0.80–1.48, P-value = 0.5989), which was consistent with results obtained under four genotypic models (ranges: ORs 1.08–1.20, 95% CIs: 0.58–2.02 to 0.64–2.26; P-values, 0.3650–0.8177, which all exceeded multiplicity-adjusted α = 0.05/5 = 0.01). In addition, no significant association was found between K109R and T2D risk based on either an allele model (OR = 0.93, 95% CI: 0.85–1.03, P-value = 0.1868) or four genotypic models (ranges: ORs 0.81–0.99, 95% CIs: 0.67–0.86 to 0.97–1.26, P-values, 0.0207–0.8804 which all exceeded multiplicity-adjusted α of 0.01). The magnitudes of association for these two SNPs were not dramatically changed in subgroup analyses by ethnicity or sensitivity analyses. Funnel plot inspections as well as Begg and Mazumdar adjusted rank correlation test and Egger linear regression test did not reveal significant publication biases in main and subgroup analyses. Bioinformatics analysis predicted that both missense SNPs were functionally neutral and benign. Conclusions The present meta-analysis did not detect significant genetic

Tilt engineering of exchange coupling at G-type SrMnO3/(La,Sr)MnO3 interfaces

Science.gov (United States)

Li, F.; Song, C.; Wang, Y. Y.; Cui, B.; Mao, H. J.; Peng, J. J.; Li, S. N.; Wang, G. Y.; Pan, F.

2015-11-01

With the recent realization of hybrid improper ferroelectricity and room-temperature multiferroic by tilt engineering, “functional” octahedral tilting has become a novel concept in multifunctional perovskite oxides, showing great potential for property manipulation and device design. However, the control of magnetism by octahedral tilting has remained a challenging issue. Here a qualitative and quantitative tilt engineering of exchange coupling, one of the magnetic properties, is demonstrated at compensated G-type antiferromagnetic/ferromagnetic (SrMnO3/La2/3Sr1/3MnO3) interfaces. According to interfacial Hamiltonian, exchange bias (EB) in this system originates from an in-plane antiphase rotation (a-) in G-type antiferromagnetic layer. Based on first-principles calculation, tilt patterns in SrMnO3 are artificially designed in experiment with different epitaxial strain and a much stronger EB is attained in the tensile heterostructure than the compressive counterpart. By controlling the magnitude of octahedral tilting, the manipulation of exchange coupling is even performed in a quantitative manner, as expected in the theoretical estimation. This work realized the combination of tilt engineering and exchange coupling, which might be significant for the development of multifunctional materials and antiferromagnetic spintronics.

Development of an Engineering Soil Database

Science.gov (United States)

2017-12-27

ER D C TR 1 7- 15 Rapid Airfield Damage Recovery (RADR) Program Development of an Engineering Soil Database En gi ne er R es ea rc...distribution is unlimited. The US Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and environmental...challenges. ERDC develops innovative solutions in civil and military engineering , geospatial sciences, water resources, and environmental sciences

Engineering zonal cartilage through bioprinting collagen type II hydrogel constructs with biomimetic chondrocyte density gradient.

Science.gov (United States)

Ren, Xiang; Wang, Fuyou; Chen, Cheng; Gong, Xiaoyuan; Yin, Li; Yang, Liu

2016-07-20

Cartilage tissue engineering is a promising approach for repairing and regenerating cartilage tissue. To date, attempts have been made to construct zonal cartilage that mimics the cartilaginous matrix in different zones. However, little attention has been paid to the chondrocyte density gradient within the articular cartilage. We hypothesized that the chondrocyte density gradient plays an important role in forming the zonal distribution of extracellular matrix (ECM). In this study, collagen type II hydrogel/chondrocyte constructs were fabricated using a bioprinter. Three groups were created according to the total cell seeding density in collagen type II pre-gel: Group A, 2 × 10(7) cells/mL; Group B, 1 × 10(7) cells/mL; and Group C, 0.5 × 10(7) cells/mL. Each group included two types of construct: one with a biomimetic chondrocyte density gradient and the other with a single cell density. The constructs were cultured in vitro and harvested at 0, 1, 2, and 3 weeks for cell viability testing, reverse-transcription quantitative PCR (RT-qPCR), biochemical assays, and histological analysis. We found that total ECM production was positively correlated with the total cell density in the early culture stage, that the cell density gradient distribution resulted in a gradient distribution of ECM, and that the chondrocytes' biosynthetic ability was affected by both the total cell density and the cell distribution pattern. Our results suggested that zonal engineered cartilage could be fabricated by bioprinting collagen type II hydrogel constructs with a biomimetic cell density gradient. Both the total cell density and the cell distribution pattern should be optimized to achieve synergistic biological effects.

Minimum Specific Fuel Consumption of a Liquid-Cooled Multicylinder Aircraft Engine as Affected by Compression Ratio and Engine Operating Conditions

Science.gov (United States)

Brun, Rinaldo J.; Feder, Melvin S.; Harries, Myron L.

1947-01-01

An investigation was conducted on a 12-cylinder V-type liquid-cooled aircraft engine of 1710-cubic-inch displacement to determine the minimum specific fuel consumption at constant cruising engine speed and compression ratios of 6.65, 7.93, and 9.68. At each compression ratio, the effect.of the following variables was investigated at manifold pressures of 28, 34, 40, and 50 inches of mercury absolute: temperature of the inlet-air to the auxiliary-stage supercharger, fuel-air ratio, and spark advance. Standard sea-level atmospheric pressure was maintained at the auxiliary-stage supercharger inlet and the exhaust pressure was atmospheric. Advancing the spark timing from 34 deg and 28 deg B.T.C. (exhaust and intake, respectively) to 42 deg and 36 deg B.T.C. at a compression ratio of 6.65 resulted in a decrease of approximately 3 percent in brake specific fuel consumption. Further decreases in brake specific fuel consumption of 10.5 to 14.1 percent (depending on power level) were observed as the compression ratio was increased from 6.65 to 9.68, maintaining at each compression ratio the spark advance required for maximum torque at a fuel-air ratio of 0.06. This increase in compression ratio with a power output of 0.585 horsepower per cubic inch required a change from . a fuel- lend of 6-percent triptane with 94-percent 68--R fuel at a compression ratio of 6.65 to a fuel blend of 58-percent, triptane with 42-percent 28-R fuel at a compression ratio of 9.68 to provide for knock-free engine operation. As an aid in the evaluation of engine mechanical endurance, peak cylinder pressures were measured on a single-cylinder engine at several operating conditions. Peak cylinder pressures of 1900 pounds per square inch can be expected at a compression ratio of 9.68 and an indicated mean effective pressure of 320 pounds per square inch. The engine durability was considerably reduced at these conditions.

Post-Synapse Model Cell for Synaptic Glutamate Receptor (GluR-Based Biosensing: Strategy and Engineering to Maximize Ligand-Gated Ion-Flux Achieving High Signal-to-Noise Ratio

Directory of Open Access Journals (Sweden)

Tetsuya Haruyama

2012-01-01

Full Text Available Cell-based biosensing is a “smart” way to obtain efficacy-information on the effect of applied chemical on cellular biological cascade. We have proposed an engineered post-synapse model cell-based biosensors to investigate the effects of chemicals on ionotropic glutamate receptor (GluR, which is a focus of attention as a molecular target for clinical neural drug discovery. The engineered model cell has several advantages over native cells, including improved ease of handling and better reproducibility in the application of cell-based biosensors. However, in general, cell-based biosensors often have low signal-to-noise (S/N ratios due to the low level of cellular responses. In order to obtain a higher S/N ratio in model cells, we have attempted to design a tactic model cell with elevated cellular response. We have revealed that the increase GluR expression level is not directly connected to the amplification of cellular responses because the saturation of surface expression of GluR, leading to a limit on the total ion influx. Furthermore, coexpression of GluR with a voltage-gated potassium channel increased Ca2+ ion influx beyond levels obtained with saturating amounts of GluR alone. The construction of model cells based on strategy of amplifying ion flux per individual receptors can be used to perform smart cell-based biosensing with an improved S/N ratio.

Co-Optimization of Fuels and Engines

Energy Technology Data Exchange (ETDEWEB)

Farrell, John

2016-03-24

The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a new DOE initiative focused on accelerating the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development (R&D) are designed to deliver maximum energy savings, emissions reduction, and on-road vehicle performance. The initiative's integrated approach combines the previously independent areas of biofuels and combustion R&D, bringing together two DOE Office of Energy Efficiency & Renewable Energy research offices, ten national laboratories, and numerous industry and academic partners to simultaneously tackle fuel and engine research and development (R&D) to maximize energy savings and on-road vehicle performance while dramatically reducing transportation-related petroleum consumption and greenhouse gas (GHG) emissions. This multi-year project will provide industry with the scientific underpinnings required to move new biofuels and advanced engine systems to market faster while identifying and addressing barriers to their commercialization. This project's ambitious, first-of-its-kind approach simultaneously tackles fuel and engine innovation to co-optimize performance of both elements and provide dramatic and rapid cuts in fuel use and emissions. This presentation provides an overview of the project.

Co-Optimization of Fuels and Engines

Energy Technology Data Exchange (ETDEWEB)

Farrell, John

2016-04-11

The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a new DOE initiative focused on accelerating the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development (R&D) are designed to deliver maximum energy savings, emissions reduction, and on-road vehicle performance. The initiative's integrated approach combines the previously independent areas of biofuels and combustion R&D, bringing together two DOE Office of Energy Efficiency & Renewable Energy research offices, ten national laboratories, and numerous industry and academic partners to simultaneously tackle fuel and engine research and development (R&D) to maximize energy savings and on-road vehicle performance while dramatically reducing transportation-related petroleum consumption and greenhouse gas (GHG) emissions. This multi-year project will provide industry with the scientific underpinnings required to move new biofuels and advanced engine systems to market faster while identifying and addressing barriers to their commercialization. This project's ambitious, first-of-its-kind approach simultaneously tackles fuel and engine innovation to co-optimize performance of both elements and provide dramatic and rapid cuts in fuel use and emissions. This presentation provides an overview of the initiative and reviews recent progress focused on both advanced spark-ignition and compression-ignition approaches.

Cardiovascular Risk Assessment with Vascular Function, Carotid Atherosclerosis and the UKPDS Risk Engine in Korean Patients with Newly Diagnosed Type 2 Diabetes

Directory of Open Access Journals (Sweden)

Choon Sik Seon

2011-12-01

Full Text Available BackgroundPatients with type 2 diabetes have an increased risk of cardiovascular disease. Few studies have evaluated the cardiovascular disease (CVD risk simultaneously using the United Kingdom Prospective Diabetes Study (UKPDS risk engine and non-invasive vascular tests in patients with newly diagnosed type 2 diabetes.MethodsParticipants (n=380; aged 20 to 81 years with newly diagnosed type 2 diabetes were free of clinical evidence of CVD. The 10-year coronary heart disease (CHD and stroke risks were calculated for each patient using the UKPDS risk engine. Carotid intima media thickness (CIMT, flow mediated dilation (FMD, pulse wave velocity (PWV and augmentation index (AI were measured. The correlations between the UKPDS risk engine and the non-invasive vascular tests were assessed using partial correlation analysis, after adjusting for age, and multiple regression analysis.ResultsThe mean 10-year CHD and 10-year stroke risks were 14.92±11.53% and 4.03±3.95%, respectively. The 10-year CHD risk correlated with CIMT (P<0.001, FMD (P=0.017, and PWV (P=0.35 after adjusting for age. The 10-year stroke risk correlated only with the mean CIMT (P<0.001 after adjusting for age. FMD correlated with age (P<0.01 and systolic blood pressure (P=0.09. CIMT correlated with age (P<0.01, HbA1c (P=0.05, and gender (P<0.01.ConclusionThe CVD risk is increased at the onset of type 2 diabetes. CIMT, FMD, and PWV along with the UKPDS risk engine should be considered to evaluate cardiovascular disease risk in patients with newly diagnosed type 2 diabetes.

Installation, maintenance and operating manual for the Lucas-type fuel injection system of the 3 B rotary engine

Science.gov (United States)

1985-01-01

The installation procedure, maintenance, adjustment and operation of a Lucas type fuel injection system for 13B rotary racing engine is outlined. Components of the fuel injection system and installation procedure and notes are described. Maintenance, adjustment, and operation are discussed.

Protein engineering of CYP105s for their industrial uses.

Science.gov (United States)

Yasuda, Kaori; Sugimoto, Hiroshi; Hayashi, Keiko; Takita, Teisuke; Yasukawa, Kiyoshi; Ohta, Miho; Kamakura, Masaki; Ikushiro, Shinichi; Shiro, Yoshitsugu; Sakaki, Toshiyuki

2018-01-01

Cytochrome P450 enzymes belonging to the CYP105 family are predominantly found in bacteria belonging to the phylum Actinobacteria and the order Actinomycetales. In this review, we focused on the protein engineering of P450s belonging to the CYP105 family for industrial use. Two Arg substitutions to Ala of CYP105A1 enhanced its vitamin D 3 25- and 1α-hydroxylation activities by 400 and 100-fold, respectively. The coupling efficiency between product formation and NADPH oxidation was largely improved by the R84A mutation. The quintuple mutant Q87W/T115A/H132L/R194W/G294D of CYP105AB3 showed a 20-fold higher activity than the wild-type enzyme. Amino acids at positions 87 and 191 were located at the substrate entrance channel, and that at position 294 was located close to the heme group. Semi-rational engineering of CYP105A3 selected the best performing mutant, T85F/T119S/V194N/N363Y, for producing pravastatin. The T119S and N363Y mutations synergistically had remarkable effects on the interaction between CYP105A3 and putidaredoxin. Although wild-type CYP105AS1 hydroxylated compactin to 6-epi-pravastatin, the quintuple mutant I95T/Q127R/A180V/L236I/A265N converted almost all compactin to pravastatin. Five amino acid substitutions by two rounds of mutagenesis almost completely changed the stereo-selectivity of CYP105AS1. These results strongly suggest that the protein engineering of CYP105 enzymes greatly increase their industrial utility. This article is part of a Special Issue entitled: Cytochrome P450 biodiversity and biotechnology, edited by Erika Plettner, Gianfranco Gilardi, Luet Wong, Vlada Urlacher, Jared Goldstone. Copyright © 2017 Elsevier B.V. All rights reserved.

Human Kunitz-type protease inhibitor engineered for enhanced matrix retention extends longevity of fibrin biomaterials.

Science.gov (United States)

Briquez, Priscilla S; Lorentz, Kristen M; Larsson, Hans M; Frey, Peter; Hubbell, Jeffrey A

2017-08-01

Aprotinin is a broad-spectrum serine protease inhibitor used in the clinic as an anti-fibrinolytic agent in fibrin-based tissue sealants. However, upon re-exposure, some patients suffer from hypersensitivity immune reactions likely related to the bovine origin of aprotinin. Here, we aimed to develop a human-derived substitute to aprotinin. Based on sequence homology analyses, we identified the Kunitz-type protease inhibitor (KPI) domain of human amyloid-β A4 precursor protein as being a potential candidate. While KPI has a lower intrinsic anti-fibrinolytic activity than aprotinin, we reasoned that its efficacy is additionally limited by its fast release from fibrin material, just as aprotinin's is. Thus, we engineered KPI variants for controlled retention in fibrin biomaterials, using either covalent binding through incorporation of a substrate for the coagulation transglutaminase Factor XIIIa or through engineering of extracellular matrix protein super-affinity domains for sequestration into fibrin. We showed that both engineered KPI variants significantly slowed plasmin-mediated fibrinolysis in vitro, outperforming aprotinin. In vivo, our best engineered KPI variant (incorporating the transglutaminase substrate) extended fibrin matrix longevity by 50%, at a dose at which aprotinin did not show efficacy, thus qualifying it as a competitive substitute of aprotinin in fibrin sealants. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Scientific Instruments and Epistemology Engines

Czech Academy of Sciences Publication Activity Database

Dvořák, Tomáš

2012-01-01

Roč. 34, č. 4 (2012), s. 529-540 ISSN 1210-0250 R&D Projects: GA ČR(CZ) GAP401/11/2338 Institutional support: RVO:67985955 Keywords : material culture of science * scientific instruments * epistemology engines * experimental systems Subject RIV: AA - Philosophy ; Religion

Rotational hypersurfaces with $L_r$-pointwise 1-type Gauss map

Directory of Open Access Journals (Sweden)

Akram Mohammadpouri

2018-07-01

Full Text Available In this paper, we study hypersurfaces in $\\E^{n+1}$ which Gauss map $G$ satisfies the equation $L_rG = f(G + C$ for a smooth function $f$ and a constant vector $C$, where $L_r$ is the linearized operator of the $(r + 1$th mean curvature of the hypersurface, i.e., $L_r(f=tr(P_r\\circ\

Software engineers and nuclear engineers: teaming up to do testing

International Nuclear Information System (INIS)

Kelly, D.; Cote, N.; Shepard, T.

2007-01-01

The software engineering community has traditionally paid little attention to the specific needs of engineers and scientists who develop their own software. Recently there has been increased recognition that specific software engineering techniques need to be found for this group of developers. In this case study, a software engineering group teamed with a nuclear engineering group to develop a software testing strategy. This work examines the types of testing that proved to be useful and examines what each discipline brings to the table to improve the quality of the software product. (author)

12 April 2013 - The British Royal Academy of Engineering visiting the LHC superconducting magnet test hall with R. Veness and the ATLAS experimental cavern with Collaboration Spokesperson D. Charlton.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

12 April 2013 - The British Royal Academy of Engineering visiting the LHC superconducting magnet test hall with R. Veness and the ATLAS experimental cavern with Collaboration Spokesperson D. Charlton.

Improving the performance of a compression ignition engine by directing flow of inlet air

Science.gov (United States)

Kemper, Carlton

1946-01-01

The object of this report is to present the results of tests performed by the National Advisory Committee for Aeronautics to determine the effect on engine performance of directing the flow of the inlet air to a 5-inch by 7-inch cylinder, solid injection, compression ignition engine, After a few preliminary tests, comparative runs were made at a speed of 1500 r.p.m. with and without directed air flow. It was found that directing the flow of the inlet air toward the fuel injection valve gave steadier engine operation, and an appreciable increase in power, and decreased fuel consumption. The results indicate the possibility of improving the performance of a given type of combustion chamber without changing its shape and with no change in valve timing. They would also seem to prove that directional turbulence, set up before the inlet valve of a four-stroke cycle engine, continues in the engine cylinder throughout the compression stroke.

Boron containing poly-(lactide-co-glycolide) (PLGA) scaffolds for bone tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Doğan, Ayşegül; Demirci, Selami [Department of Genetics and Bioengineering, Faculty of Engineering and Architecture, Yeditepe University 34755 Istanbul (Turkey); Bayir, Yasin [Department of Biochemistry, Faculty of Pharmacy, Ataturk University, 25240, Erzurum (Turkey); Halici, Zekai [Department of Pharmacology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Karakus, Emre [Department of Pharmacology and Toxicology, Faculty of Veterinary Medicine, Ataturk University, 25240, Erzurum (Turkey); Aydin, Ali [Department of Orthopedics and Traumatology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Cadirci, Elif [Department of Pharmacology, Faculty of Pharmacy, Ataturk University, 25240, Erzurum (Turkey); Albayrak, Abdulmecit [Department of Pharmacology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Demirci, Elif [Department of Pathology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Karaman, Adem [Department of Radiology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Ayan, Arif Kursat [Department of Nuclear Medicine, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Gundogdu, Cemal [Department of Pathology, Faculty of Medicine, Ataturk University, 25240, Erzurum (Turkey); Şahin, Fikrettin, E-mail: fsahin@yeditepe.edu.tr [Department of Genetics and Bioengineering, Faculty of Engineering and Architecture, Yeditepe University 34755 Istanbul (Turkey)

2014-11-01

Scaffold-based bone defect reconstructions still face many challenges due to their inadequate osteoinductive and osteoconductive properties. Various biocompatible and biodegradable scaffolds, combined with proper cell type and biochemical signal molecules, have attracted significant interest in hard tissue engineering approaches. In the present study, we have evaluated the effects of boron incorporation into poly-(lactide-co-glycolide-acid) (PLGA) scaffolds, with or without rat adipose-derived stem cells (rADSCs), on bone healing in vitro and in vivo. The results revealed that boron containing scaffolds increased in vitro proliferation, attachment and calcium mineralization of rADSCs. In addition, boron containing scaffold application resulted in increased bone regeneration by enhancing osteocalcin, VEGF and collagen type I protein levels in a femur defect model. Bone mineralization density (BMD) and computed tomography (CT) analysis proved that boron incorporated scaffold administration increased the healing rate of bone defects. Transplanting stem cells into boron containing scaffolds was found to further improve bone-related outcomes compared to control groups. Additional studies are highly warranted for the investigation of the mechanical properties of these scaffolds in order to address their potential use in clinics. The study proposes that boron serves as a promising innovative approach in manufacturing scaffold systems for functional bone tissue engineering. - Highlights: • Boron containing PLGA scaffolds were developed for bone tissue engineering. • Boron incorporation increased cell viability and mineralization of stem cells. • Boron containing scaffolds increased bone-related protein expression in vivo. • Implantation of stem cells on boron containing scaffolds improved bone healing.

Boron containing poly-(lactide-co-glycolide) (PLGA) scaffolds for bone tissue engineering

International Nuclear Information System (INIS)

Doğan, Ayşegül; Demirci, Selami; Bayir, Yasin; Halici, Zekai; Karakus, Emre; Aydin, Ali; Cadirci, Elif; Albayrak, Abdulmecit; Demirci, Elif; Karaman, Adem; Ayan, Arif Kursat; Gundogdu, Cemal; Şahin, Fikrettin

2014-01-01

Scaffold-based bone defect reconstructions still face many challenges due to their inadequate osteoinductive and osteoconductive properties. Various biocompatible and biodegradable scaffolds, combined with proper cell type and biochemical signal molecules, have attracted significant interest in hard tissue engineering approaches. In the present study, we have evaluated the effects of boron incorporation into poly-(lactide-co-glycolide-acid) (PLGA) scaffolds, with or without rat adipose-derived stem cells (rADSCs), on bone healing in vitro and in vivo. The results revealed that boron containing scaffolds increased in vitro proliferation, attachment and calcium mineralization of rADSCs. In addition, boron containing scaffold application resulted in increased bone regeneration by enhancing osteocalcin, VEGF and collagen type I protein levels in a femur defect model. Bone mineralization density (BMD) and computed tomography (CT) analysis proved that boron incorporated scaffold administration increased the healing rate of bone defects. Transplanting stem cells into boron containing scaffolds was found to further improve bone-related outcomes compared to control groups. Additional studies are highly warranted for the investigation of the mechanical properties of these scaffolds in order to address their potential use in clinics. The study proposes that boron serves as a promising innovative approach in manufacturing scaffold systems for functional bone tissue engineering. - Highlights: • Boron containing PLGA scaffolds were developed for bone tissue engineering. • Boron incorporation increased cell viability and mineralization of stem cells. • Boron containing scaffolds increased bone-related protein expression in vivo. • Implantation of stem cells on boron containing scaffolds improved bone healing

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 1:] The value of Scientific and Technical Information (STI), its relationship to Research and Development (R&D), and its use by US aerospace engineers and scientists

Science.gov (United States)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1990-01-01

The relationship between scientific and technical information (STI), its use by aerospace engineers and scientists, and the aerospace R&D process is examined. Data are presented from studies of the role of STI in the performance and management of R&D activities and the behavior of engineers when using and seeking information. Consideration is given to the information sources used to solve technical problems, the production and use of technical communications, and the use of libraries, technical information centers, and on-line data bases.

Report of the Review Committee of the R and D subjects on Computational Science and Engineering

International Nuclear Information System (INIS)

1999-08-01

The Ad Hoc Review Committee composed of seven experts was set up under the Research Evaluation Committee of JAERI in order to review the R and D subjects to be implemented for five years starting in a 2000 fiscal year at the Center for promotion of Computational Science and Engineering. The review meeting took place on April 26, 1999. According to the review methods consisting of review items, points of review and review criteria given by the Research Evaluation Committee, the review was conducted based on the materials submitted in advance and presentations of CCSE. The Research Evaluation Committee received the review report and its explanations from the Review Committee on July 5. The Research Evaluation Committee has acknowledged appropriateness of the review results. This report describes the review results. (author)

Peculiarities and Variations in the Optical Spectrum of the RV Tauri-type Star R Sct

Directory of Open Access Journals (Sweden)

Kipper Tõnu

2013-06-01

Full Text Available We analyzed some new high resolution optical spectra of the semiregular RV Tauri-type star R Sct. Fundamental parameters were found to be Teff = 4500 K, log g = 0.0 and ξt = 4.0 km s−1. The results of chemical analysis show that R Sct is a metal-poor star with [Fe/H]≈ −0.5. The carbon content with respect to iron is significantly larger than in the Sun, [C/Fe]=0.84, but there is an evident deficiency of heavy elements. We found no tight correlation of the chemical abundances on the condensation temperatures of elements. This means that in R Sct the depletion by condensation into dust does not work, with possible exception of Ca and Sc. The luminosity derived from the Hipparcos parallax corresponds to a tip of the red-giant branch or slightly above it. Thus it is possible that R Sct evolved off the early-AGB when it has not yet experienced the third dredge-up in thermal pulses, or it is still located on AGB. The peculiarities of spectral features (emissions, line-splitting and the complicated time-variable radial velocities were also studied.

Stirling engine alternatives for the terrestrial solar application

Science.gov (United States)

Stearns, J.

1985-01-01

The first phase of the present study of Stirling engine alternatives for solar thermal-electric generation has been completed. Development risk levels are considered to be high for all engines evaluated. Free-piston type and Ringbom-type Stirling engine-alternators are not yet developed for the 25 to 50-kW electrical power range, although smaller machines have demonstrated the inherent robustness of the machines. Kinematic-type Stirling engines are presently achieving a 3500 hr lifetime or longer on critical components, and lifetime must still be further extended for the solar application. Operational and technical characteristics of all types of Stirling engines have been reviewed with engine developers. Technical work of merit in progress in each engine development organization should be recognized and supported in an appropriate manner.

Wave interactions with multiple semi-immersed Jarlan-type perforated breakwaters

Science.gov (United States)

Elbisy, Moussa S.

2017-06-01

This study examines wave interactions with multiple semi-immersed Jarlan-type perforated breakwaters. A numerical model based on linear wave theory and an eigenfunction expansion method has been developed to study the hydrodynamic characteristics of breakwaters. The numerical results show a good agreement with previous analytical results and experimental data for limiting cases of double partially immersed impermeable walls and double and triple Jarlan-type breakwaters. The wave transmission coefficient C T; reflection coefficient C R, and energy dissipation coefficient C E coefficients and the horizontal wave force exerted on the front and rear walls are examined. The results show that C R reaches the maximum value when B/L = 0.46 n while it is smallest when B/L=0.46 n+0.24 ( n=0, 1, 2,...). An economical triple semi-immersed Jarlan-type perforated breakwater can be designed with B/L = 0.25 and C R and C T ranging from 0.25 to 0.32 by choosing a relative draft d/h of 0.35 and a permeability parameter of the perforated front walls being 0.5 for an incident wave number kh nearly equal to 2.0. The triple semi-immersed Jarlan-type perforated breakwaters with significantly reduced C R, will enhance the structure's wave absorption ability, and lead to smaller wave forces compared with the double one. The proposed model may be used to predict the response of a structure in the preliminary design stage for practical engineering.

J R Vengateswaran

Indian Academy of Sciences (India)

More Details Fulltext PDF. Volume 4 Issue 5 May 1999 pp 88-94 General Article. Systems and Control Engineering - Control Systems-Analysis and Design · A Rama Kalyan J R Vengateswaran · More Details Fulltext PDF. Volume 4 Issue 12 December 1999 pp 76-82 General Article. Robotics - Components and Subsystems.

An R2R3-type MYB transcription factor, GmMYB29, regulates isoflavone biosynthesis in soybean.

Directory of Open Access Journals (Sweden)

Shanshan Chu

2017-05-01

Full Text Available Isoflavones comprise a group of secondary metabolites produced almost exclusively by plants in the legume family, including soybean [Glycine max (L. Merr.]. They play vital roles in plant defense and have many beneficial effects on human health. Isoflavone content is a complex quantitative trait controlled by multiple genes, and the genetic mechanisms underlying isoflavone biosynthesis remain largely unknown. Via a genome-wide association study (GWAS, we identified 28 single nucleotide polymorphisms (SNPs that are significantly associated with isoflavone concentrations in soybean. One of these 28 SNPs was located in the 5'-untranslated region (5'-UTR of an R2R3-type MYB transcription factor, GmMYB29, and this gene was thus selected as a candidate gene for further analyses. A subcellular localization study confirmed that GmMYB29 was located in the nucleus. Transient reporter gene assays demonstrated that GmMYB29 activated the IFS2 (isoflavone synthase 2 and CHS8 (chalcone synthase 8 gene promoters. Overexpression and RNAi-mediated silencing of GmMYB29 in soybean hairy roots resulted in increased and decreased isoflavone content, respectively. Moreover, a candidate-gene association analysis revealed that 11 natural GmMYB29 polymorphisms were significantly associated with isoflavone contents, and regulation of GmMYB29 expression could partially contribute to the observed phenotypic variation. Taken together, these results provide important genetic insights into the molecular mechanisms underlying isoflavone biosynthesis in soybean.

LS1: electrical engineering upgrades and consolidation

International Nuclear Information System (INIS)

Duval, F.

2012-01-01

3 different types of activities are planned by the Engineering Department Electrical Engineering (EN-EL) Group for the first long shut down (LS1). First, the consolidation of EN-EL's ageing infrastructure elements. It is part of a 15- year programme aiming at increasing the reliability and availability of the power distribution network. Secondly, the maintenance of the accelerators infrastructure. In addition to the usual periodic operations and those delayed until LS1, the group will address more demanding activities like the replacement campaigns for irradiated cables and non-radiation resistant fibres as well as the removal of unused cables in particularly overcrowded areas. Thirdly, a vast amount of user copper and optical fibre cabling requests: EN-EL estimates that only 50% of LS1 requests are currently known. The main activities will be EN-EL's contributions to the R2E project, BE-BI upgrade projects, and the RF upgrade project in SPS BA3

GOES-R: Satellite Insight

Science.gov (United States)

Fitzpatrick, Austin J.; Leon, Nancy J.; Novati, Alexander; Lincoln, Laura K.; Fisher, Diane K.

2012-01-01

GOES-R: Satellite Insight seeks to bring awareness of the GOES-R (Geostationary Operational Environmental Satellite -- R Series) satellite currently in development to an audience of all ages on the emerging medium of mobile games. The iPhone app (Satellite Insight) was created for the GOES-R Program. The app describes in simple terms the types of data products that can be produced from GOES-R measurements. The game is easy to learn, yet challenging for all audiences. It includes educational content and a path to further information about GOESR, its technology, and the benefits of the data it collects. The game features action-puzzle game play in which the player must prevent an overflow of data by matching falling blocks that represent different types of GOES-R data. The game adds more different types of data blocks over time, as long as the player can prevent a data overflow condition. Points are awarded for matches, and players can compete with themselves to beat their highest score.

On the Emerging Role of the Taste Receptor Type 1 (T1R Family of Nutrient-Sensors in the Musculoskeletal System

Directory of Open Access Journals (Sweden)

Shoichiro Kokabu

2017-03-01

Full Text Available The special sense of taste guides and guards food intake and is essential for body maintenance. Salty and sour tastes are sensed via ion channels or gated ion channels while G protein-coupled receptors (GPCRs of the taste receptor type 1 (T1R family sense sweet and umami tastes and GPCRs of the taste receptor type 2 (T2R family sense bitter tastes. T1R and T2R receptors share similar downstream signaling pathways that result in the stimulation of phospholipase-C-β2. The T1R family includes three members that form heterodimeric complexes to recognize either amino acids or sweet molecules such as glucose. Although these functions were originally described in gustatory tissue, T1R family members are expressed in numerous non-gustatory tissues and are now viewed as nutrient sensors that play important roles in monitoring global glucose and amino acid status. Here, we highlight emerging evidence detailing the function of T1R family members in the musculoskeletal system and review these findings in the context of the musculoskeletal diseases sarcopenia and osteoporosis, which are major public health problems among the elderly that affect locomotion, activities of daily living, and quality of life. These studies raise the possibility that T1R family member function may be modulated for therapeutic benefit.

Directed Evolution to Engineer Monobody for FRET Biosensor Assembly and Imaging at Live-Cell Surface.

Science.gov (United States)

Limsakul, Praopim; Peng, Qin; Wu, Yiqian; Allen, Molly E; Liang, Jing; Remacle, Albert G; Lopez, Tyler; Ge, Xin; Kay, Brian K; Zhao, Huimin; Strongin, Alex Y; Yang, Xiang-Lei; Lu, Shaoying; Wang, Yingxiao

2018-04-19

Monitoring enzymatic activities at the cell surface is challenging due to the poor efficiency of transport and membrane integration of fluorescence resonance energy transfer (FRET)-based biosensors. Therefore, we developed a hybrid biosensor with separate donor and acceptor that assemble in situ. The directed evolution and sequence-function analysis technologies were integrated to engineer a monobody variant (PEbody) that binds to R-phycoerythrin (R-PE) dye. PEbody was used for visualizing the dynamic formation/separation of intercellular junctions. We further fused PEbody with the enhanced CFP and an enzyme-specific peptide at the extracellular surface to create a hybrid FRET biosensor upon R-PE capture for monitoring membrane-type-1 matrix metalloproteinase (MT1-MMP) activities. This biosensor revealed asymmetric distribution of MT1-MMP activities, which were high and low at loose and stable cell-cell contacts, respectively. Therefore, directed evolution and rational design are promising tools to engineer molecular binders and hybrid FRET biosensors for monitoring molecular regulations at the surface of living cells. Copyright © 2018 Elsevier Ltd. All rights reserved.

Non-skew-symmetric classical r-matrices, algebraic Bethe ansatz, and Bardeen-Cooper-Schrieffer-type integrable systems

International Nuclear Information System (INIS)

Skrypnyk, T.

2009-01-01

We construct quantum integrable systems associated with non-skew-symmetric gl(2)-valued classical r-matrices. We find a new explicit multiparametric family of such the non-skew-symmetric classical r-matrices. We consider two classes of examples of the corresponding integrable systems, namely generalized Gaudin systems with and without an external magnetic field. In the case of arbitrary r-matrices diagonal in a standard gl(2)-basis, we calculate the spectrum of the corresponding quantum integrable systems using the algebraic Bethe ansatz. We apply these results to a construction of integrable fermionic models and obtain a wide class of integrable Bardeen-Cooper-Schrieffer (BCS)-type fermionic Hamiltonians containing the pairing and electrostatic interaction terms. We also consider special cases when the corresponding integrable Hamiltonians contain only pairing interaction term and are exact analogs of the 'reduced BCS Hamiltonian' of Richardson

Mechanical Engineering Senior Design Project Final Presentations | College

Science.gov (United States)

Engineering Research Computational Mechanics Laboratory Environmental Engineering Laboratory Geotechnical of Engineering & Applied Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L Programs Concentration in Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer

Efficient Spatial Data Structure for Multiversion Management of Engineering Drawings

Directory of Open Access Journals (Sweden)

Yasuaki Nakamura

2004-08-01

Full Text Available In the engineering database system, multiple versions of a design including engineering drawings should be managed efficiently. The paper proposes an extended spatial data structure for efficient management of multiversion engineering drawings. The R-tree is adapted as a basic data structure. The efficient mechanism to manage the difference between drawings is introduced to the R-tree to eliminate redundant duplications and to reduce the amount of storage required for the data structure. The extended data structures of the R-tree, MVR and MVR* trees, are developed and the performances of these trees are evaluated. A series of simulation tests shows that, compared with the basic R-tree, the amounts of storage required for the MVR and MVR* trees are reduced to 50% and 30%, respectively. The search efficiencies of the R, MVR, and MVR* trees are almost the same.

Identification and expression analysis of a novel R-type lectin from the coleopteran beetle, Tenebrio molitor.

Science.gov (United States)

Kim, Dong Hyun; Patnaik, Bharat Bhusan; Seo, Gi Won; Kang, Seong Min; Lee, Yong Seok; Lee, Bok Luel; Han, Yeon Soo

2013-11-01

We have identified novel ricin-type (R-type) lectin by sequencing of random clones from cDNA library of the coleopteran beetle, Tenebrio molitor. The cDNA sequence is comprised of 495 bp encoding a protein of 164 amino acid residues and shows 49% identity with galectin of Tribolium castaneum. Bioinformatics analysis shows that the amino acid residues from 35 to 162 belong to ricin-type beta-trefoil structure. The transcript was significantly upregulated after early hours of injection with peptidoglycans derived from Gram (+) and Gram (-) bacteria, beta-1, 3 glucan from fungi and an intracellular pathogen, Listeria monocytogenes suggesting putative function in innate immunity. Copyright © 2013 Elsevier Inc. All rights reserved.

Breeding of a xylose-fermenting hybrid strain by mating genetically engineered haploid strains derived from industrial Saccharomyces cerevisiae.

Science.gov (United States)

Inoue, Hiroyuki; Hashimoto, Seitaro; Matsushika, Akinori; Watanabe, Seiya; Sawayama, Shigeki

2014-12-01

The industrial Saccharomyces cerevisiae IR-2 is a promising host strain to genetically engineer xylose-utilizing yeasts for ethanol fermentation from lignocellulosic hydrolysates. Two IR-2-based haploid strains were selected based upon the rate of xylulose fermentation, and hybrids were obtained by mating recombinant haploid strains harboring heterogeneous xylose dehydrogenase (XDH) (wild-type NAD(+)-dependent XDH or engineered NADP(+)-dependent XDH, ARSdR), xylose reductase (XR) and xylulose kinase (XK) genes. ARSdR in the hybrids selected for growth rates on yeast extract-peptone-dextrose (YPD) agar and YP-xylose agar plates typically had a higher activity than NAD(+)-dependent XDH. Furthermore, the xylose-fermenting performance of the hybrid strain SE12 with the same level of heterogeneous XDH activity was similar to that of a recombinant strain of IR-2 harboring a single set of genes, XR/ARSdR/XK. These results suggest not only that the recombinant haploid strains retain the appropriate genetic background of IR-2 for ethanol production from xylose but also that ARSdR is preferable for xylose fermentation.

KEK Engineering Department -activity report FY 2003

International Nuclear Information System (INIS)

2005-03-01

This report includes all kinds of activities of the Engineering Department of KEK from 2002 to 2003 FY. There are fourteen chapters, which contain KEK Prize for engineering, KEK meeting of engineering technologies, Engineering Seminar, COACK (Component Oriented Advanced Control Kernel) for cooperation R and D project, Forum on engineering technologies from 1998 to 2003 FY, Engineering Department Symposium, service trainings, Engineering Department research study, English training, training for professional worker, training for technical expert, report on joint training for technical expert, training for middle school students, and the Engineering Department system and the main events from 1971 to 2003. (S.Y. )

Origin of the early-type R stars: a binary-merger solution to a century-old problem?

NARCIS (Netherlands)

Izzard, R.G.; Jeffery, C.S.; Lattanzio, J.C.

2007-01-01

The early-R stars are carbon-rich K-type giants. They are enhanced in C12, C13 and N14, have approximately solar oxygen, magnesium isotopes, s-process and iron abundances, have the luminosity of core-helium burning stars, are not rapid rotators, are members of the Galactic thick disk and, most

Use of synovium-derived stromal cells and chitosan/collagen type I scaffolds for cartilage tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Gong Zhongcheng; Lin Zhaoquan [Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Xinjiang Medical University, Urumqi, Xinjiang 830054 (China); Xiong Hui; Long Xing; Wei Lili; Li Jian; Wu Yang, E-mail: xinglong1957@yahoo.com.c [State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine, Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, Hubei 430079 (China)

2010-10-01

The objective was to investigate synovium-derived stromal cells (SDSCs) coupled with chitosan/collagen type I (CS/COL-I) scaffolds for cartilage engineering. CS/COL-I scaffolds were fabricated through freeze-drying and cross-linked by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide. SDSCs were isolated from synovium and cultured onto CS/COL-I scaffolds, constructs of which were incubated in serum-free chondrogenic medium with sequential application of TGF-{beta}1 and bFGF for up to 21 days and then implanted into nude mice. The physical characteristics of the scaffolds were examined. The quality of the in vitro constructs was assessed in terms of DNA content by PicoGreen assay and cartilaginous matrix by histological examination. The implants of the constructs were evaluated by histological and immunohistochemical examinations and reverse transcription PCR. Results indicated that the CS/COL-I scaffold showed porous structures, and the DNA content of SDSCs in CS/COL-I scaffolds increased at 1 week culture time. Both of the constructs in vitro and the implants were examined with positive stained GAGs histologically and the implants with positive collagen type II immunohistochemically. RT-PCR of the implants indicated that aggrecan and collagen type II expressed. It suggested that SDSCs coupled with CS/COL-I scaffolds treated sequentially with TGF-{beta}1 and bFGF in vitro were highly competent for engineered cartilage formation in vitro and in vivo.

Phase composition of iron-rich R-Fe-Si (R=Dy, Ho, Er) alloys

International Nuclear Information System (INIS)

Ivanova, G.V.; Makarova, G.M.; Shcherbakova, E.V.; Belozerov, E.V.

2005-01-01

Phase composition is studied in iron-rich alloys of R-Fe-Si (R=Dy, Ho, Er). In the as-cast state R 2 (Fe, Si) 17 of type Th 2 Ni 17 and R(Fe, Si) 12 compounds are observed; in the alloys of rated composition of R(Fe 0.85 Si 0.15 ) 8.5 (R=Dy, Er) a compound R 2 (Fe, Si) 17 of Th 2 Zn 17 -type is revealed as well. The annealing at 1273 K results in formation of Dy 3 (Fe, Si) 29 and also the compounds with the presumed composition of Dy 4 (Fe, Si) 41 and Ho 4 (Fe, Si) 41 . As this takes place the alloys contain a transition structure as well that represents a set of small-sized areas with various type short-range order in mutual displacement of Fe-Fe(Si) dumpbell chains. The process of phase formation at 1273 K is faced with difficulties. Even the annealing for 1000 h does not result in the state of equilibrium [ru

Annual report of R and D activities in center for promotion of computational science and engineering from April 1, 2004 to March 31, 2005

International Nuclear Information System (INIS)

2005-09-01

This report provides an overview of research and development activities in Center for Promotion of Computational Science and Engineering (CCSE), JAERI, in the fiscal year 2004 (April 1, 2004 - March 31, 2005). The activities have been performed by Research Group for Computational Science in Atomic Energy, Research Group for Computational Material Science in Atomic Energy, R and D Group for Computer Science, R and D Group for Numerical Experiments, and Quantum Bioinformatics Group in CCSE. The ITBL (Information Technology Based Laboratory) project is performed mainly by the R and D Group for Computer Science and the Research Group for Computational Science in Atomic Energy. According to the mid-term evaluation for the ITBL project conducted by the MEXT, the achievement of the ITBL infrastructure software developed by JAERI has been remarked as outstanding at the 13th Information Science and Technology Committee in the Subdivision on R and D Planning and Evaluation of the Council for Science and Technology on April 26th, 2004. (author)

Trend of supersonic aircraft engine. Choonsokukiyo engine no doko

Energy Technology Data Exchange (ETDEWEB)

Yashima, S [Ishikawajima-Harima Heavy Industries, Co. Ltd., Tokyo (Japan)

1994-05-01

The present paper explained the R and D trend of supersonic aircraft engine in Europe, USA and Japan. Taking the high speed flight resistance into consideration, the engine must be characterized by its high exhaust gas speed and high specific thrust (ratio of thrust to the airflow rate) to secure strong thrust by a low airflow rate. Therefore, the turbojet is appropriate. However to reduce the fuel consumption during the cruising flight, the turbofan is normally used with a low by-pass ratio of 0.2 to 0.9. The thrust-to-weight ratio (thrust per unit weight) of low by-pass ratio turbofan engine equipped with afterburner is 7 to 8 in case of stronger thrust than 70kN. Its target value of development is 10. The specific thrust which is a performance parameter of engine exceeds 120s for the fighter engine and is about 30s for the passenger plane engine. The turbine inlet temperature is 2073K at the stage of element research. The overall pressure ratio ranges from 25 to 30. The reheating turbofan engine experimentally built for the research in Japan is 34kN in thrust and 7 in thrust-to-weight ratio. 8 refs., 9 figs.

Effect of Mineral Filler Type and Particle Size on the Engineering Properties of Stone Mastic Asphalt Pavements

Directory of Open Access Journals (Sweden)

R Muniandy

2013-12-01

Full Text Available This study examines four types of industrial and by-product waste fillers, namely limestone dust (LSD, which was the reference filler; ceramic waste dust (CWD; coal fly ash (CFA, and steel slag mixture (SSD. The filler consisted of an aggregate (10% of total weight with three proportions: 100% passing 75μm, 50% passing 75μm/20μm, and 100% passing 20μm. Comprehensive laboratory tests were performed to determine the impact of different types and particle sizes of fillers on the engineering and mechanical properties of fine mastics and stone mastic asphalt mixture. The results indicate that the application of industrial by-products used as fillers improves the engineering properties of stone mastic asphalt mixtures. The increased stiffness due to the addition of the filler is represented by an increase in the softening point, viscosity, stability, and resilient modulus, as well as a decrease in penetration. The optimum asphalt content increased with the decrease in filler particle size for LSD and SSD, and decreased for CWD and CFA. It was also determined that the filler type and particle size has a significant effect on the mixture properties. Among these three proportions, the samples prepared with the filler size proportion of 50/50 gave the best value in terms of stability, Marshall quotient, and resilient modulus than the other filler size proportions.

Optimization of rhombic drive mechanism used in beta-type Stirling engine based on dimensionless analysis

International Nuclear Information System (INIS)

Cheng, Chin-Hsiang; Yang, Hang-Suin

2014-01-01

In the present study, optimization of rhombic drive mechanism used in a beta-type Stirling engine is performed based on a dimensionless theoretical model toward maximization of shaft work output. Displacements of the piston and the displacer with the rhombic drive mechanism and variations of volumes and pressure in the chambers of the engine are firstly expressed in dimensionless form. Secondly, Schmidt analysis is incorporated with Senft's shaft work theory to build a dimensionless thermodynamic model, which is employed to yield the dimensionless shaft work. The dimensionless model is verified with experimental data. It is found that the relative error between the experimental and the theoretical data in dimensionless shaft work is lower than 5.2%. This model is also employed to investigate the effects of the influential geometric parameters on the shaft work, and the optimization of these parameters is attempted. Eventually, design charts that help design the optimal geometry of the rhombic drive mechanism are presented in this report. - Highlights: • Specifically dealing with optimization of rhombic-drive mechanism used in Stirling engine based on dimensionless model. • Propose design charts that help determine the optimal geometric parameters of the rhombic drive mechanism. • Complete study of influential factors affecting the shaft work output

Cell Factory Engineering

DEFF Research Database (Denmark)

Davy, Anne Mathilde; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

2017-01-01

focused on individual strategies or cell types, but collectively they fall under the broad umbrella of a growing field known as cell factory engineering. Here we condense >130 reviews and key studies in the art into a meta-review of cell factory engineering. We identified 33 generic strategies......-review provides general strategy guides for the broad range of applications of rational engineering of cell factories....

Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

Diesel Engine Tribology

DEFF Research Database (Denmark)

Christiansen, Christian Kim

Recent years have seen an increase in the wear rate of engine bearings, subsequently followed by bearing failure, for the large two-stroke diesel engines used for ship propulsion. Here, the engine bearings include main, big end and crosshead bearings, with the bearing type used being the journal...... bearing, belonging to the class of ‘hydrodynamic bearings’. This implies that the load carrying capacity is generated by a relative movement of the involved components, i.e. avelocity-driven operation. For the engine application, the velocity stems from the engine RPM. However, to comply with the latest...

Reversible and irreversible heat engine and refrigerator cycles

Science.gov (United States)

Leff, Harvey S.

2018-05-01

Although no reversible thermodynamic cycles exist in nature, nearly all cycles covered in textbooks are reversible. This is a review, clarification, and extension of results and concepts for quasistatic, reversible and irreversible processes and cycles, intended primarily for teachers and students. Distinctions between the latter process types are explained, with emphasis on clockwise (CW) and counterclockwise (CCW) cycles. Specific examples of each are examined, including Carnot, Kelvin and Stirling cycles. For the Stirling cycle, potentially useful task-specific efficiency measures are proposed and illustrated. Whether a cycle behaves as a traditional refrigerator or heat engine can depend on whether it is reversible or irreversible. Reversible and irreversible-quasistatic CW cycles both satisfy Carnot's inequality for thermal efficiency, η ≤ η C a r n o t . Irreversible CCW cycles with two reservoirs satisfy the coefficient of performance inequality K ≤ K C a r n o t . However, an arbitrary reversible cycle satisfies K ≥ K C a r n o t when compared with a reversible Carnot cycle operating between its maximum and minimum temperatures, a potentially counterintuitive result.

FY1995 establishment of extracellular matrix engineering by the combination of genetic engineering and polymer engineering and the application to super-bioartifical liver; 1995 nendo idenshi kogaku to kobunshi kogaku wo yugoshita atarashii saibogai matrix kogaku no sosei to super bio jinko zoki kaihatsu eno tenkai

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Cellular and tissue engineering for bioartificial organs need lots of information about extra-cellular matrices and cytokines network which play important roles for the regulation of cellular function. In order to develop high performance artificial livers, we made establishment of extracellular matrix (ECM) engineering by the combination of genetic engineering and polymer engineering. We designed a superglycoprotein-like polymer (PVLA) as a specific model ligand to asialoglycoprotein receptors (ASGP-R) on hepatocytes. Hepatocytes morphology was remarkably affected by PVLA concentration for coating on polystyrene dishes. In addition, hepatic functions such as differentiation and proliferation were closely related with cell morphology. Especially, round hepatocytes on the polystyrene surface coated with high concentration of PVLA were found to reconstruct 3D liver-like tissue stimulated by EGF. It turned out that the adsorptive states of PVLA polymeric micells can switch the function of EGF to be motogenic or mitogenic. The mechanisms of 3D-tissue formation on two types of substrata mediated by ASGP-R were examined. The proliferation and cell death (apoptosis) in hepatitis of hepatocytes were also examined in the viewpoint of cytokine network such as TNF - {alpha} and interferon-{gamma}. The highly efficient gene-transfection into hepatocytes was also successfully made using PVLA as ECM for cell attachment. As one of the trials to clarify liver cells society formation the mechanism of the final differentiation of kupffer cells and the role of HGF in embryonic construction of liver were successfully examined. (NEDO)

Quantitative analysis of fatty-acid-based biofuels produced by wild-type and genetically engineered cyanobacteria by gas chromatography-mass spectrometry.

Science.gov (United States)

Guan, Wenna; Zhao, Hui; Lu, Xuefeng; Wang, Cong; Yang, Menglong; Bai, Fali

2011-11-11

Simple and rapid quantitative determination of fatty-acid-based biofuels is greatly important for the study of genetic engineering progress for biofuels production by microalgae. Ideal biofuels produced from biological systems should be chemically similar to petroleum, like fatty-acid-based molecules including free fatty acids, fatty acid methyl esters, fatty acid ethyl esters, fatty alcohols and fatty alkanes. This study founded a gas chromatography-mass spectrometry (GC-MS) method for simultaneous quantification of seven free fatty acids, nine fatty acid methyl esters, five fatty acid ethyl esters, five fatty alcohols and three fatty alkanes produced by wild-type Synechocystis PCC 6803 and its genetically engineered strain. Data obtained from GC-MS analyses were quantified using internal standard peak area comparisons. The linearity, limit of detection (LOD) and precision (RSD) of the method were evaluated. The results demonstrated that fatty-acid-based biofuels can be directly determined by GC-MS without derivation. Therefore, rapid and reliable quantitative analysis of fatty-acid-based biofuels produced by wild-type and genetically engineered cyanobacteria can be achieved using the GC-MS method founded in this work. Copyright © 2011 Elsevier B.V. All rights reserved.

Engine Management : A Decision Support Tool for Strategic Engine Maintenance Planning

NARCIS (Netherlands)

Mayordomo, A.F.; Ghobbar, A.A.; Ghijs, S.S.A.; Cator, E.

2010-01-01

This paper presents a model that helps engine management make cost saving decisions. The model is developed around airline-influenced factors that have an impact on engine Maintenance Repair & Overhaul (MRO): Operations, maintenance philosophy, contract type, and fleet age. Within the model a

Inactivation of SACE_3446, a TetR family transcriptional regulator, stimulates erythromycin production in Saccharopolyspora erythraea

OpenAIRE

Wu, Hang; Wang, Yansheng; Yuan, Li; Mao, Yongrong; Wang, Weiwei; Zhu, Lin; Wu, Panpan; Fu, Chengzhang; Müller, Rolf; Weaver, David T.; Zhang, Lixin; Zhang, Buchang

2016-01-01

Erythromycin A is a widely used antibiotic produced by Saccharopolyspora erythraea; however, its biosynthetic cluster lacks a regulatory gene, limiting the yield enhancement via regulation engineering of S. erythraea. Herein, six TetR family transcriptional regulators (TFRs) belonging to three genomic context types were individually inactivated in S. erythraea A226, and one of them, SACE_3446, was proved to play a negative role in regulating erythromycin biosynthesis. EMSA and qRT-PCR analysi...

FY 1974 report on the results of the Sunshine Project. Comprehensive study of hydrogen use subsystem and study on the periphery technology (Study on the hydrogen engine for airplane use); 1974 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu seika hokokusho. Kokukiyo suiso engine ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-05-01

This study is aimed at using hydrogen as fuel for airplane engine in the study on the use of hydrogen energy to be made as one of the new energy developments. In the investigational study plan, technical/economical possibilities of the airplane engine using hydrogen as fuel and the airplane carrying the engine are grasped to make the details of the R and D clear by the end of FY 1976. By the end of FY 1974, the actual state in the world of the airplane engine using hydrogen as fuel and the airplane carrying the engine was grasped to make the problems clear. The detailed R and D are as follows. (1) Survey of the actual state of and the problems of the hydrogen engine in Japan and abroad (to be conducted in FY 1974). (2) Consideration of the conceptual design of the potential hydrogen engine, and possibility of the commercialization and prediction of the time of the commercialization (to be conducted in FY 1975). (3) Survey of type, performance, etc. of the airplane carrying hydrogen engine, and the actual economical value and demand (to be conducted in FY 1976). This paper described the results of the survey on hydrogen general and hydrogen use airplane. (NEDO)

On $R^4$ terms and MHV amplitudes in N = 5,6 supergravity vacua of Type II superstrings

CERN Document Server

Bianchi, Massimo

2011-01-01

We compute one-loop threshold corrections to $R^4$ terms in N= 5,6 supergravity vacua of Type II superstrings. We then discuss non-perturbative corrections generated by asymmetric D-brane instantons. Finally we derive generating functions for MHV amplitudes at tree level in N = 5, 6 supergravities.

“Cooperation in R&D, firm size and type of partnership: Evidence for the Spanish automotive industry”

OpenAIRE

Erika Raquel Badillo; Francisco Llorente; Rosina Moreno

2014-01-01

This paper aims to analyse cooperation in R&D in the automobile industry in Spain. It first examines to what extent firms cooperate with external actors in the field of technological innovation, and if so, with what type of cooperation partner, paying special attention to the differentiation according to the size of the firms. Second, it aims to study how the firm’s size may affect not only the decision of cooperating but also with which type of partner, while controlling for other determina...

R3-R4 deletion in the PRNP gene is associated with Creutzfeldt-Jakob disease (CJD)

Energy Technology Data Exchange (ETDEWEB)

Cervenakova, L.; Brown, P.; Nagle, J. [and others

1994-09-01

There are conflicting reports on the association of deletions in the PRNP gene on chromosome 20 with CJD, a rapidly progressive fatal spongiform encephalopathy. We accumulated data suggesting that a deletion of R3-R4 type (parts of the third and fourth repeats are deleted from the area of four repeating 24 bp sequences in the 5{prime} region of the gene) is causing CJD. Screening of 129 unaffected control individuals demonstrated presence of a deletion of R2 type in four (1.55% of the studied chromosomes), but none of them had the R3-R4 type. Of 181 screened patients with spongiform encephalopathies, two had a deletion of R3-R4 type with no other mutations in the coding sequence. Both patients had a classical rapidly progressive dementing disease and diffuse spongiform degeneration, and both cases were apparently sporadic. The same R3-R4 type of deletion was detected in three additional neuropathologically confirmed spongiform encephalopathy patients, of which two had other known pathogenic mutations in the PRNP gene: at codon 178 on the methionine allele exhibiting the phenotype of fatal familial insomnia, and codon 200 causing CJD with severe dementia; the third was a patient with iatrogenic CJD who developed the disease after treatment with growth hormone extracted from cadaveric human pituitary glands. In all cases the deletion coincided with a variant sequence at position 129 coding for methionine.

SEI Software Engineering Education Directory.

Science.gov (United States)

1987-02-01

Planning, and Control, Kotler , P. Marketing Decision Making, Concepts and Strategy, Cravens Managerial Fnance: Essentials, Kroncke, C., Nammers, E., and...Textbooks: Applying Software Engineering Principles , Maria Systems: Cyber Turbo Dos Variety of Micros Courses: Introduction to Software Engineering...Assistant Professor of Computer Systems (513) 255-6913 Courses: Software Engineeing Managemrent EENG543 G N R A Textbooks: Principles of Productive

How Engineers Negotiate Domain Boundaries in a Complex, Interdisciplinary Engineering Project

Science.gov (United States)

Panther, Grace; Montfort, Devlin; Pirtle, Zachary

2017-01-01

Engineering educators have an essential role in preparing engineers to work in a complex, interdisciplinary workforce. While much engineering education focuses on teaching students to develop disciplinary expertise in specific engineering domains, there is a strong need to teach engineers about the knowledge that they develop or use in their work (Bucciarelli 1994, Allenby Sarewitz, 2011; Frodeman, 2013). The purpose of this research is to gain a better understanding of the knowledge systems of practicing engineers through observations of their practices such that the insights learned can guide future education efforts. Using an example from a complex and interdisciplinary engineering project, this paper presents a case study overviewing the types of epistemological (or knowledge-acquiring or using) complexities that engineers navigate. Specifically, we looked at a discussion of the thermal design of a CubeSat that occurred during an engineering review at NASA. We analyzed the review using a framework that we call 'peak events', or pointed discussions between reviewers, project engineers, and managers. We examined the dialog within peak events to identify the ways that knowledge was brought to bear, highlighting discussions of uncertainty and the boundaries of knowledge claims. We focus on one example discussion surrounding the thermal design of the CubeSat, which provides a particularly thorough example of a knowledge system since the engineers present explained, justified, negotiated, and defended knowledge within a social setting. Engineering students do not get much practice or instruction in explicitly negotiating knowledge systems and epistemic standards in this way. We highlight issues that should matter to engineering educators, such as the need to discuss what level of uncertainty is sufficient and the need to negotiate boundaries of system responsibility. Although this analysis is limited to a single discussion or 'peak event', our case shows that this

Component-Based Software Engineering and Runtime Type Definition

OpenAIRE

A. R. Shakurov

2011-01-01

The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

The Crystal Structure and Mechanism of an Unusual Oxidoreductase, GilR, Involved in Gilvocarcin V Biosynthesis

Energy Technology Data Exchange (ETDEWEB)

Noinaj, Nicholas; Bosserman, Mary A.; Schickli, M. Alexandra; Piszczek, Grzegorz; Kharel, Madan K.; Pahari, Pallab; Buchanan, Susan K.; Rohr, Jürgen (NIH); (Kentucky)

2012-11-26

GilR is a recently identified oxidoreductase that catalyzes the terminal step of gilvocarcin V biosynthesis and is a unique enzyme that establishes the lactone core of the polyketide-derived gilvocarcin chromophore. Gilvocarcin-type compounds form a small distinct family of anticancer agents that are involved in both photo-activated DNA-alkylation and histone H3 cross-linking. High resolution crystal structures of apoGilR and GilR in complex with its substrate pregilvocarcin V reveals that GilR belongs to the small group of a relatively new type of the vanillyl-alcohol oxidase flavoprotein family characterized by bicovalently tethered cofactors. GilR was found as a dimer, with the bicovalently attached FAD cofactor mediated through His-65 and Cys-125. Subsequent mutagenesis and functional assays indicate that Tyr-445 may be involved in reaction catalysis and in mediating the covalent attachment of FAD, whereas Tyr-448 serves as an essential residue initiating the catalysis by swinging away from the active site to accommodate binding of the 6R-configured substrate and consequently abstracting the proton of the hydroxyl residue of the substrate hemiacetal 6-OH group. These studies lay the groundwork for future enzyme engineering to broaden the substrate specificity of this bottleneck enzyme of the gilvocarcin biosynthetic pathway for the development of novel anti-cancer therapeutics.

Spatial separation of photosynthesis and ethanol production by cell type-specific metabolic engineering of filamentous cyanobacteria.

Science.gov (United States)

Ehira, Shigeki; Takeuchi, Takuto; Higo, Akiyoshi

2018-02-01

Cyanobacteria, which perform oxygenic photosynthesis, have drawn attention as hosts for the direct production of biofuels and commodity chemicals from CO 2 and H 2 O using light energy. Although cyanobacteria capable of producing diverse chemicals have been generated by metabolic engineering, anaerobic non-photosynthetic culture conditions are often necessary for their production. In this study, we conducted cell type-specific metabolic engineering of the filamentous cyanobacterium Anabaena sp. PCC 7120, which forms a terminally differentiated cell called a heterocyst with a semi-regular spacing of 10-15 cells. Because heterocysts are specialized cells for nitrogen fixation, the intracellular oxygen level of heterocysts is maintained very low even when adjacent cells perform oxygenic photosynthesis. Pyruvate decarboxylase of Zymomonas mobilis and alcohol dehydrogenase of Synechocystis sp. PCC 6803 were exclusively expressed in heterocysts. Ethanol production was concomitant with nitrogen fixation in genetically engineered Anabaena sp. PCC 7120. Engineering of carbon metabolism in heterocysts improved ethanol production, and strain ET14, with an extra copy of the invB gene expressed from a heterocyst-specific promoter, produced 130.9 mg L -1 of ethanol after 9 days. ET14 produced 1681.9 mg L -1 of ethanol by increasing the CO 2 supply. Ethanol production per heterocyst cell was approximately threefold higher than that per cell of unicellular cyanobacterium. This study demonstrates the potential of heterocysts for anaerobic production of biofuels and commodity chemicals under oxygenic photosynthetic conditions.

78 FR 16357 - Research, Engineering and Development Advisory Committee

Science.gov (United States)

2013-03-14

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development... hereby given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: April 24--8:30 a.m. to 4...

Bio-preparation of (R)-DMPM using whole cells of Pseudochrobactrum asaccharolyticum WZZ003 and its application on kilogram-scale synthesis of fungicide (R)-metalaxyl.

Science.gov (United States)

Zhang, Yinjun; Fan, Yicheng; Zhang, Wei; Wu, Guanzhong; Wang, Jinghong; Cheng, Feng; Zheng, Jianyong; Wang, Zhao

2018-04-25

Methyl (R)-N-(2,6-dimethylphenyl)alaninate ((R)-DMPM) is a key chiral intermediate for the production of (R)-metalaxyl, which is one of the best-selling fungicides. A new strain, Pseudochrobactrum asaccharolyticum WZZ003, was identified as a biocatalyst for the enantioselective hydrolysis of (R,S)-DMPM. The key parameters including pH, temperature, rotation speed and substrate concentrations were optimized in the enantioselective hydrolysis of (R,S)-DMPM. After the 48 h hydrolysis of 256 mM (R,S)-DMPM under the optimized reaction conditions, the enantiomeric excess of product (e.e. p ) was up to 99% and the conversion was nearly 50%. Subsequently, the unhydrolyzed (S)-DMPM was converted to (R,S)-DMPM through the n-butanal-catalyzed racemization. Furthermore, stereoselective hydrolysis of (R,S)-DMPM catalyzed by whole cells of P. asaccharolyticum WZZ003 was scaled up to kilogram-scale, offering (R)-MAP-acid with 98.6% e.e. p and 48.0% yield. Moreover, (R)-metalaxyl was prepared at kilogram scale after subsequent esterification and coupling reactions. Therefore, a practical production process of (R)-DMPM and (R)-metalaxyl with the prospect of industrialization was developed in this study. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018. © 2018 American Institute of Chemical Engineers.

Engineering Change Management Method Framework in Mechanical Engineering

Science.gov (United States)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

JAEA FBR Plant Engineering Center annual report 2011

International Nuclear Information System (INIS)

2012-11-01

The FBR Plant Engineering Center was established on April 1, 2009 located in a research building, of which care is taken by the International Nuclear Information Training Center, Tsuruga Head Office, at Shiraki in Tsuruga. The mission of the center is to perform R and D (research and development) works both for analysis of operational experiences at the prototype fast breeder reactor “Monju” and for technology development concerning design and operation of “Monju”. Moreover it is also required to apply the results to next generation fast breeder reactors, which is an important role of Advanced Nuclear System Research and Development Directorate. And in these R and D activities, it is expected to conduct the works in cooperation with domestic or foreign research organizations or universities by a joint-study or a collaborative-work manner. The R and D activities have been carried out specifically on the “demonstration of the reliability as a power generation plant” and “establishment of sodium handling technology”, which are originally intended missions of “Monju”. And the other R and Ds have been promoted both for the plant engineering, such as plant maintenance, to effectively use an existing reactor in order to apply the R and D results to a future demonstration reactor, and for the irradiation test study, such as advanced fuel irradiation, to use “Monju” as an irradiation test bed. In order to perform these R and D activities, five R and D groups have been set up in the center. They are operation-and-maintenance engineering, sodium engineering, reactor-core-and-fuel engineering, plant engineering, and safety engineering groups. However, the Japanese atomic energy policy is being reviewed after the accident of the Fukushima Daiichi nuclear power station caused by a tsunami generated by the Tohoku-district-off-the-Pacific-Ocean Earthquake on March 11, 2011, and all the R and D activities using “Monju” have been suspended since late 2011

Linear models with R

CERN Document Server

Faraway, Julian J

2014-01-01

A Hands-On Way to Learning Data AnalysisPart of the core of statistics, linear models are used to make predictions and explain the relationship between the response and the predictors. Understanding linear models is crucial to a broader competence in the practice of statistics. Linear Models with R, Second Edition explains how to use linear models in physical science, engineering, social science, and business applications. The book incorporates several improvements that reflect how the world of R has greatly expanded since the publication of the first edition.New to the Second EditionReorganiz

Computational Fluid Dynamics Applied to Chemical Reaction Engineering La mécanique des fluides numérique appliquée au génie des réactions chimiques

Directory of Open Access Journals (Sweden)

Trambouze P.

2006-11-01

Full Text Available Computational Fluid Dynamics (CFD and its applications have developed quite rapidly during the last ten years. This fast growing hybrid branch of Mechanics and Mathematics is certainly to be considered as a potentially useful and efficient tool in the field of Chemical Engineering and more specifically in the area of Chemical Reaction Engineering (CRE. The difficulties in this new approach stems from the consequence of the complexity of the mechanims to be simulated simultaneously : fluid dynamics, chemical reactions and physical aspects of each system considered. Another difficulty comes from the numerical treatment of the equations for the final model, resulting in very sophisticated and diversified mathematical treatments. The types of chemical reactors to be considered for potential performance improvements when applying CFD as a new tool for their design are numerous ; two broad classes of problem have be identified as relevant to this new approach :(a Systems involving fast chemical reactions, with characteristic times of the same order of magnitude as the characteristic time scales of turbulence. In-line mixing equipment should preferably be studied for this type of reactions. (b Multiphase systems, whose scaling-up still has to be performed with great difficulty and, more often than not, according to empirical procedures based on very simplified models. When looking at the various types of systems found in practice, it appears that gas-liquid and fluid-solid systems should be considered first. However, basic knowledge is still missing concerning the physical behaviour of these systems, especially for the coalescence of bubbles and the momentum transfer between gas and solid. Specific research should be done in order to get this missing information. Presently there are a certain number of existing CFD software packages available commercially or developed by various research laboratories. This is certainly an interesting starting point

Recovery of Exhaust Waste Heat for ICE Using the Beta Type Stirling Engine

Directory of Open Access Journals (Sweden)

Wail Aladayleh

2015-01-01

Full Text Available This paper investigates the potential of utilizing the exhaust waste heat using an integrated mechanical device with internal combustion engine for the automobiles to increase the fuel economy, the useful power, and the environment safety. One of the ways of utilizing waste heat is to use a Stirling engine. A Stirling engine requires only an external heat source as wasted heat for its operation. Because the exhaust gas temperature may reach 200 to 700°C, Stirling engine will work effectively. The indication work, real shaft power and specific fuel consumption for Stirling engine, and the exhaust power losses for IC engine are calculated. The study shows the availability and possibility of recovery of the waste heat from internal combustion engine using Stirling engine.

Choosing nuclear engineering: A survey of nuclear engineering undergraduates

International Nuclear Information System (INIS)

Shillenn, J.K.; Klevans, E.H.

1988-01-01

Maintaining a reliable pool of qualified nuclear engineering graduates depends on the ability of nuclear engineering undergraduate programs to recruit students. With the prospect of declining enrollments in nuclear engineering it is important for nuclear engineering programs to know what factors influence students to choose nuclear engineering as an undergraduate major and why they choose a particular undergraduate program. This type of information can be very important to nuclear engineering programs that develop recruiting strategies. To provide some insight into this area, a questionnaire was designed and given to undergraduate nuclear engineering students at Pennsylvania State University. The purpose of the survey was to provide information on the reasons that students picked nuclear engineering as a career and chose to attend Penn State. The questionnaire was given to 27 students in their junior year during the spring semester of 1987 and again to 35 junior students during the spring semester of 1988. There was little difference except as noted between the two groups on their responses to the questionnaire. A partial listing of the survey results is provided

REM - the Shape of Potentials for f(R) Theories in Cosmology and Tachyons

CERN Document Server

Vulcanov, Dumitru N; Sporea, Ciprian A

2014-01-01

We investigated the reverse engineering method (REM) for constructing the potential of the scalar field in cosmological theories based on metric f(R) gravity and Friedman Robertson Walker (FRW) metric. Then transposing the new field and Friedman equations in an algebraic computing special library (in Maple + GrTennsorII platform) we graphically investigate the shape of the potentials in terms of the scalar field in at least two type of cosmology with exponential and linear scale factor expansion. Some perspectives and conclusions relating these results with tachyonic cosmology theories are noticed.

The gRbase Package for Graphical Modelling in R

DEFF Research Database (Denmark)

Højsgaard, Søren; Dethlefsen, Claus

We have developed a package, called , consisting of a number of classes and associated methods to support the analysis of data using graphical models. It is developed for the open source language, R, and is available for several platforms. The package is intended to be widely extendible...... these building blocks can be combined and integrated with inference engines in the special cases of hierarchical log-linear models (undirected models). gRbase gRbase dynamicGraph...... and flexible so that package developers may implement further types of graphical models using the available methods. contains methods for representing data, specification of models using a formal language, and is linked to , an interactive graphical user interface for manipulating graphs. We show how...

The Charging Process in a High-speed, Single-cylinder, Four-stroke Engine

Science.gov (United States)

Reynolds, Blake; Schecter, Harry; Taylor, E S

1939-01-01

Experimental measurements and theoretical calculations were made on an aircraft-type, single cylinder engine, in order to determine the physical nature of the inlet process, especially at high piston speeds. The engine was run at speeds from 1,500 to 2,600 r.p.m. (mean piston speeds of 1,370 to 2,380 feet per minute). Measurements were made of the cylinder pressure during the inlet stroke and of the power output and volumetric efficiency. Measurements were also made, with the engine not running, to determine the resistance and mass of air in the inlet valve port at various crank angles. Results of analysis indicate that mass has an appreciable effect, but friction plays the major part in restricting flow. The observed fact that the volumetric efficiency is considerably less than 100 percent is attributed to thermal effects. An estimate was made of the magnitude of these effects in the present case, and their general nature is discussed.

Preparative engineering on the Tomari Nuclear Power Station Unit 3. In-site measurement on wave pressure working to new type bank protection

International Nuclear Information System (INIS)

Matsumoto, Yoriaki; Hoshi, Hideki; Amano, Hideki

2003-01-01

The Tomari Nuclear Power Station Unit 3 is planned to construct it at sea-side area adjacent to southern-east portion of Unit 1 and 2, and has been carried out its preparative engineerings such as bank protection with about 670 m in length, its development, and so on, corresponding to it. Among them, as type of landfill for protection of important construction at its background the Amahata covered-block type bank protection developed by a series of hydrologic tests was adopted. This engineering was begun on March, 2001, and most of establishment on the landfill bank protection was finished on June, 2003. Then, an in-situ measurement aiming to obtain actual testing data and so on of wave pressure at this type of bank protection, was planned, to carry out its measurement at winter (October, 2002 to February, 2003) showing the highest wave at this sea area. Here were reported on relationship between incident wave and wave pressure feature working at new type bank protection together with describing on outlines of the in-situ measurement. (G.K.)

Reliability Engineering Handbook

Science.gov (United States)

1964-06-01

Operations Research for Management, Volume 11 by McCloskey and Coppinger, pp 329-339. ( Actuarial 24. Barlow, Rt. E., and Hunter, L. C., approach to failure...Engineers ( ASME ). (Pro- ceedings published) National Convention on Aeronautical Electronics - Sponsored by I.R.E. Annual Meeting - American

Online Normalization Algorithm for Engine Turbofan Monitoring

Science.gov (United States)

2014-10-02

Online Normalization Algorithm for Engine Turbofan Monitoring Jérôme Lacaille 1 , Anastasios Bellas 2 1 Snecma, 77550 Moissy-Cramayel, France...understand the behavior of a turbofan engine, one first needs to deal with the variety of data acquisition contexts. Each time a set of measurements is...it auto-adapts itself with piecewise linear models. 1. INTRODUCTION Turbofan engine abnormality diagnosis uses three steps: reduction of

Systems and Control Engineering

Indian Academy of Sciences (India)

design of civil engineering structures has been noted. Protecting ci vil ... R despite disturbing forces such as wind gusts, changes in ambient temperature, etc .. Brief History of ... frequency regulation, boiler control for steam generation, electric.

The CaV2.3 R-type voltage-gated Ca2+ channel in mouse sleep architecture.

Science.gov (United States)

Siwek, Magdalena Elisabeth; Müller, Ralf; Henseler, Christina; Broich, Karl; Papazoglou, Anna; Weiergräber, Marco

2014-05-01

Voltage-gated Ca(2+) channels (VGCCs) are key elements in mediating thalamocortical rhythmicity. Low-voltage activated (LVA) CaV 3 T-type Ca(2+) channels have been related to thalamic rebound burst firing and to generation of non-rapid eye movement (NREM) sleep. High-voltage activated (HVA) CaV 1 L-type Ca(2+) channels, on the opposite, favor the tonic mode of action associated with higher levels of vigilance. However, the role of the HVA Non-L-type CaV2.3 Ca(2+) channels, which are predominantly expressed in the reticular thalamic nucleus (RTN), still remains unclear. Recently, CaV2.3(-/-) mice were reported to exhibit altered spike-wave discharge (SWD)/absence seizure susceptibility supported by the observation that CaV2.3 mediated Ca(2+) influx into RTN neurons can trigger small-conductance Ca(2+)-activated K(+)-channel type 2 (SK2) currents capable of maintaining thalamic burst activity. Based on these studies we investigated the role of CaV2.3 R-type Ca(2+) channels in rodent sleep. The role of CaV2.3 Ca(2+) channels was analyzed in CaV2.3(-/-) mice and controls in both spontaneous and artificial urethane-induced sleep, using implantable video-EEG radiotelemetry. Data were analyzed for alterations in sleep architecture using sleep staging software and time-frequency analysis. CaV2.3 deficient mice exhibited reduced wake duration and increased slow-wave sleep (SWS). Whereas mean sleep stage durations remained unchanged, the total number of SWS epochs was increased in CaV2.3(-/-) mice. Additional changes were observed for sleep stage transitions and EEG amplitudes. Furthermore, urethane-induced SWS mimicked spontaneous sleep results obtained from CaV2.3 deficient mice. Quantitative Real-time PCR did not reveal changes in thalamic CaV3 T-type Ca(2+) channel expression. The detailed mechanisms of SWS increase in CaV2.3(-/-) mice remain to be determined. Low-voltage activated CaV2.3 R-type Ca(2+) channels in the thalamocortical loop and extra

Record mobility in transparent p-type tin monoxide films and devices by phase engineering

KAUST Repository

Caraveo-Frescas, Jesus Alfonso

2013-06-25

Here, we report the fabrication of nanoscale (15 nm) fully transparent p-type SnO thin film transistors (TFT) at temperatures as low as 180 C with record device performance. Specifically, by carefully controlling the process conditions, we have developed SnO thin films with a Hall mobility of 18.71 cm2 V-1 s-1 and fabricated TFT devices with a linear field-effect mobility of 6.75 cm2 V-1 s -1 and 5.87 cm2 V-1 s-1 on transparent rigid and translucent flexible substrates, respectively. These values of mobility are the highest reported to date for any p-type oxide processed at this low temperature. We further demonstrate that this high mobility is realized by careful phase engineering. Specifically, we show that phase-pure SnO is not necessarily the highest mobility phase; instead, well-controlled amounts of residual metallic tin are shown to substantially increase the hole mobility. A detailed phase stability map for physical vapor deposition of nanoscale SnO is constructed for the first time for this p-type oxide. © 2013 American Chemical Society.

R and D status of an integral type small reactor MRX in JAERI

International Nuclear Information System (INIS)

Hoshi, Tsutao; Ochiai, Masaaki; Iida, Hiromasa; Yamaji, Akio; Shimazaki, Junya

1995-01-01

JAERI is conducting a design study on an integral type small reactor MRX for the use of nuclear ships. The basic concept of the reactor system is the integral type reactor with in-vessel steam generators and control rod drive systems, however, such new technologies as the water-filled containment, the passive decay heat removal system, the advanced automatic system, etc., are adopted to satisfy the essential requirements for the next generation ship reactors, i.e. compact, light, highly safe and easy operation. Research and development (R and D) works have being progressed on the peculiar components, the advanced automatic operation systems and the safety study of the thermal hydraulic phenomena as well as the feasibility study of the applicability to merchant ships. The experiments and analysis of the safety carried out so far are proving that the passive safety features applied into the MRX are sufficient functions in the safety point of view. The MRX is a typical small type reactor realizing the easy operation by simplifying the reactor systems adopting the passive safety systems, therefore, it has wide variety of use as energy supply systems. This paper summarizes the present status on the design study of the MRX and the research and development activities as well as the results of feasibility study. (author)

Collaborative Engineering for Research and Development

Science.gov (United States)

Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.

2004-01-01

Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

76 FR 78808 - Airworthiness Directives; Teledyne Continental Motors (TCM) and Rolls-Royce Motors Ltd. (R-RM...

Science.gov (United States)

2011-12-20

... Airworthiness Directives; Teledyne Continental Motors (TCM) and Rolls-Royce Motors Ltd. (R-RM) Series... superseding an existing airworthiness directive (AD) for certain TCM and R-RM series reciprocating engines... adds R-RM C-125, C- 145, O-300, IO-360, TSIO-360, and LTSIO-520-AE series reciprocating engines to the...

Recent Approaches in Tooth Engineering Research

Czech Academy of Sciences Publication Activity Database

Švandová, Eva; Veselá, Barbora; Křivánek, J.; Hampl, A.; Matalová, Eva

2014-01-01

Roč. 60, Suppl 1 (2014), s. 21-29 ISSN 0015-5500 R&D Projects: GA ČR GAP304/11/1418; GA MZd(CZ) NT11420 Institutional support: RVO:67985904 Keywords : engineering * tooth * stem cells * culture techniques Subject RIV: EA - Cell Biology Impact factor: 1.000, year: 2014

Where is practice in inter-organizational R&D research?

DEFF Research Database (Denmark)

Smith, Pernille

2012-01-01

review is based on a bibliographical search of a number of academic search engines. These sources include all the major management, organizational behavior, marketing, engineering, sociology, and psychology journals, thus ensuring a thorough search on the topic of inter-organizational R&D. The review...

Research of the Resistance of Contact Welding Joint of R65 Type Rail

Directory of Open Access Journals (Sweden)

Kęstutis Dauskurdis

2015-03-01

Full Text Available In the article the R65 type rail joints that were welded by resistance welding are analysed. Survey methodology of the research consists of the following parts: visual inspection of welded joint, ultrasonic rail inspection, hardness test of upper part of the rail, fusion area research, the measurement hardness test of heat-softened area, the measurement microhardness test, microstructure research of the welded joint, impact strength experiments, chemical analysis of welded joint, wheel-rail interaction research using the finite element method (FEM. The results of the research are analysed and the quality of weld is evaluated. The conclusion is based on the results of this research.

Windmilling of turbofan engine; calculation of performance characteristics of a turbofan engine under windmilling

NARCIS (Netherlands)

Ramanathan, A.

2014-01-01

The turbofan is a type of air breathing jet engine that finds wide use in aircraft propulsion. During the normal operation of a turbofan engine installed in aircraft, the combustor is supplied with fuel, flow to the combustor is cut off and the engine runs under so called Windmilling conditions

Carbonyl compounds and PAH emissions from CNG heavy-duty engine

International Nuclear Information System (INIS)

Gambino, M.; Cericola, R.; Corbo, P.; Iannaccone, S.

1993-01-01

Previous works carried out in Istituto Motori laboratories have shown that natural gas is a suitable fuel for general means of transportation. This is because of its favorable effects on engine performance and pollutant emissions. The natural gas fueled engine provided the same performance as the diesel engine, met R49 emission standards, and showed very low smoke levels. On the other hand, it is well known that internal combustion engines emit some components that are harmful for human health, such as carbonyl compounds and polycyclic aromatic hydrocarbons (PAH). This paper shows the results of carbonyl compounds and PAH emissions analysis for a heavy-duty Otto cycle engine fueled with natural gas. The engine was tested using the R49 cycle that is used to measure the regulated emissions. The test analysis has been compared with an analysis of a diesel engine, tested under the same conditions. Total PAH emissions from the CNG engine were about three orders of magnitude lower than from the diesel engine. Formaldehyde emission from the CNG engine was about ten times as much as from the diesel engine, while emissions of other carbonyl compounds were comparable

Biologi og/eller engineering?

DEFF Research Database (Denmark)

Daugbjerg, Peer

2018-01-01

Engineering i skolen er en anvendelsesorienteret og problemløsende undervisning, hvor eleverne lærer at udvikle konkrete løsninger på praktiske problemer. I elevernes arbejde indgår faglig viden og teknologi...

Collaborative Product Development in an R&D Environment

Science.gov (United States)

Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.; Peterson, Paul L.

2004-01-01

Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

Beginning R The Statistical Programming Language

CERN Document Server

Gardener, Mark

2012-01-01

Conquer the complexities of this open source statistical language R is fast becoming the de facto standard for statistical computing and analysis in science, business, engineering, and related fields. This book examines this complex language using simple statistical examples, showing how R operates in a user-friendly context. Both students and workers in fields that require extensive statistical analysis will find this book helpful as they learn to use R for simple summary statistics, hypothesis testing, creating graphs, regression, and much more. It covers formula notation, complex statistics

Analysis of gas turbine engines using water and oxygen injection to achieve high Mach numbers and high thrust

Science.gov (United States)

Henneberry, Hugh M.; Snyder, Christopher A.

1993-01-01

An analysis of gas turbine engines using water and oxygen injection to enhance performance by increasing Mach number capability and by increasing thrust is described. The liquids are injected, either separately or together, into the subsonic diffuser ahead of the engine compressor. A turbojet engine and a mixed-flow turbofan engine (MFTF) are examined, and in pursuit of maximum thrust, both engines are fitted with afterburners. The results indicate that water injection alone can extend the performance envelope of both engine types by one and one-half Mach numbers at which point water-air ratios reach 17 or 18 percent and liquid specific impulse is reduced to some 390 to 470 seconds, a level about equal to the impulse of a high energy rocket engine. The envelope can be further extended, but only with increasing sacrifices in liquid specific impulse. Oxygen-airflow ratios as high as 15 percent were investigated for increasing thrust. Using 15 percent oxygen in combination with water injection at high supersonic Mach numbers resulted in thrust augmentation as high as 76 percent without any significant decrease in liquid specific impulse. The stoichiometric afterburner exit temperature increased with increasing oxygen flow, reaching 4822 deg R in the turbojet engine at a Mach number of 3.5. At the transonic Mach number of 0.95 where no water injection is needed, an oxygen-air ratio of 15 percent increased thrust by some 55 percent in both engines, along with a decrease in liquid specific impulse of 62 percent. Afterburner temperature was approximately 4700 deg R at this high thrust condition. Water and/or oxygen injection are simple and straightforward strategies to improve engine performance and they will add little to engine weight. However, if large Mach number and thrust increases are required, liquid flows become significant, so that operation at these conditions will necessarily be of short duration.

Genome engineering using a synthetic gene circuit in Bacillus subtilis.

Science.gov (United States)

Jeong, Da-Eun; Park, Seung-Hwan; Pan, Jae-Gu; Kim, Eui-Joong; Choi, Soo-Keun

2015-03-31

Genome engineering without leaving foreign DNA behind requires an efficient counter-selectable marker system. Here, we developed a genome engineering method in Bacillus subtilis using a synthetic gene circuit as a counter-selectable marker system. The system contained two repressible promoters (B. subtilis xylA (Pxyl) and spac (Pspac)) and two repressor genes (lacI and xylR). Pxyl-lacI was integrated into the B. subtilis genome with a target gene containing a desired mutation. The xylR and Pspac-chloramphenicol resistant genes (cat) were located on a helper plasmid. In the presence of xylose, repression of XylR by xylose induced LacI expression, the LacIs repressed the Pspac promoter and the cells become chloramphenicol sensitive. Thus, to survive in the presence of chloramphenicol, the cell must delete Pxyl-lacI by recombination between the wild-type and mutated target genes. The recombination leads to mutation of the target gene. The remaining helper plasmid was removed easily under the chloramphenicol absent condition. In this study, we showed base insertion, deletion and point mutation of the B. subtilis genome without leaving any foreign DNA behind. Additionally, we successfully deleted a 2-kb gene (amyE) and a 38-kb operon (ppsABCDE). This method will be useful to construct designer Bacillus strains for various industrial applications. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Clinical significance of determination of changes of serum IL-2, SIL-2R, TNF-α contents and T-cell subgroup distribution type in patients with psoriasis

International Nuclear Information System (INIS)

Mou Xudong

2005-01-01

Objective: To investigate the changes of serum IL-2, SIL-2R, TNF-α contents and T-cell subgroup distribution type in patients with psoriasis. Methods: Serum IL-2 and TNF-α levels were measured with RIA, SIL-2R levels was measured with ELISA and T-cell subgroup distribution type was detected with monoclonal antibody in 40 patients with psoriasis and 35 controls. Results: The serum IL-2 levels and CD 4 /CD 8 values were significantly lower in the patients than those in controls (P<0.01), while the serum SIL-2R, TNF-α levels were significantly higher (P<0.01). Conclusion: Determination of serum IL-2, SIL-2R, TNF-α contents and T-cell subgroup distribution type is clinically useful for understanding the disturbances of immuno-modulation in these patients. (authors)

Certain Type Turbofan Engine Whole Vibration Model with Support Looseness Fault and Casing Response Characteristics

Directory of Open Access Journals (Sweden)

H. F. Wang

2014-01-01

Full Text Available Support looseness fault is a type of common fault in aeroengine. Serious looseness fault would emerge under larger unbalanced force, which would cause excessive vibration and even lead to rubbing fault, so it is important to analyze and recognize looseness fault effectively. In this paper, based on certain type turbofan engine structural features, a rotor-support-casing whole model for certain type turbofan aeroengine is established. The rotor and casing systems are modeled by means of the finite element beam method; the support systems are modeled by lumped-mass model; the support looseness fault model is also introduced. The coupled system response is obtained by numerical integral method. In this paper, based on the casing acceleration signals, the impact characteristics of symmetrical stiffness and asymmetric stiffness models are analyzed, finding that the looseness fault would lead to the longitudinal asymmetrical characteristics of acceleration time domain wave and the multiple frequency characteristics, which is consistent with the real trial running vibration signals. Asymmetric stiffness looseness model is verified to be fit for aeroengine looseness fault model.

Isolation, pure culture and characterization of Serratia symbiotica sp. nov., the R-type of secondary endosymbiont of the black bean aphid Aphis fabae.

Science.gov (United States)

Sabri, Ahmed; Leroy, Pascal; Haubruge, Eric; Hance, Thierry; Frère, Isabelle; Destain, Jacqueline; Thonart, Philippe

2011-09-01

An intracellular symbiotic bacterium was isolated from the flora of a natural clone of the black bean aphid Aphis fabae. The strain was able to grow freely in aerobic conditions on a rich medium containing 1 % of each of the following substrates: glucose, yeast extract and casein peptone. Pure culture was achieved through the use of solid-phase culture on the same medium and the strain was designated CWBI-2.3(T). 16S rRNA gene sequence analysis revealed that strain CWBI-2.3(T) was a member of the class Gammaproteobacteria, having high sequence similarity (>99 %) with 'Candidatus Serratia symbiotica', the R-type of secondary endosymbiont that is found in several aphid species. As strain CWBI-2.3(T) ( = LMG 25624(T) = DSM 23270(T)) was the first R-type symbiont to be isolated and characterized, it was designated as the type strain of Serratia symbiotica sp. nov.

Solvent production by engineered Ralstonia eutropha: channeling carbon to biofuel.

Science.gov (United States)

Chakravarty, Jayashree; Brigham, Christopher J

2018-06-01

Microbial production of solvents like acetone and butanol was a couple of the first industrial fermentation processes to gain global importance. These solvents are important feedstocks for the chemical and biofuel industry. Ralstonia eutropha is a facultatively chemolithoautotrophic bacterium able to grow with organic substrates or H 2 and CO 2 under aerobic conditions. This bacterium is a natural producer of polyhydroxyalkanoate biopolymers. Recently, with the advances in the development of genetic engineering tools, the range of metabolites R. eutropha can produce has enlarged. Its ability to utilize various carbon sources renders it an interesting candidate host for synthesis of renewable biofuel and solvent production. This review focuses on progress in metabolic engineering of R. eutropha for the production of alcohols, terpenes, methyl ketones, and alka(e)nes using various resources. Biological synthesis of solvents still presents the challenge of high production costs and competition from chemical synthesis. Better understanding of R. eutropha biology will support efforts to engineer and develop superior microbial strains for solvent production. Continued research on multiple fronts is required to engineer R. eutropha for truly sustainable and economical solvent production.

William Knocke receives 2008 Virginia Outstanding Civil Engineer Award

OpenAIRE

Daniilidi, Christina

2008-01-01

William R. Knocke, W.C. English Professor and head of the Charles E. Via, Jr. Department of Civil and Environmental Engineering at Virginia Tech, was awarded the 2008 Virginia Outstanding Civil Engineer Award at the Virginia Section of the American Society of Civil Engineers' (ASCE) banquet, held recently in Williamsburg, Va.

Comparative investigation of conventional and R744 auxiliary heating systems in motor cars with low fuel consumption on the basis of a 1.9 l TDI engine; Vergleich konventioneller Zuheizsysteme mit R744-Zuheizsystemen in Automobilen mit geringem Kraftstoffverbrauch auf Basis eines 1,9 l TDI Motors

Energy Technology Data Exchange (ETDEWEB)

Schaefer, B.; Feuerecker, G.; Heinle, D.; Strauss, T. [Behr GmbH und Co. KG, Stuttgart (Germany). Entwicklungszentrum

2003-07-01

The heat emitted by modern consumption-optimized engines, especially diesel engines, is so low that auxiliary heating systems are required for thermal comfort. With R744 air conditioning systems, the air conditioner can be used as auxiliary heating system. The contribution therefore compares conventional PTC and fuel based auxiliary heating systems with three R744 auxiliary heating systems (air-to-air heat pump, coolant-to-air heat pump, and delta process). Simulations were carried out in order to compare heat-up, fuel consumption, and cost. The simulation models were used for calculating demand-oriented heating at different ambient temperatures with a 1.9 l TDI engine. The BEHR software BISS (Behr Integrierte System Simulation) was used as simulation tool. The performance of the heat pump was significantly lower than the performance of conventional auxiliary heating systems at all temperatures. On the other hand, the additional fuel consumption as referred to performance was 15 percent lower than for conventional heating systems. The PTC system had the best cost/profit ratio. (orig.) [German] Der Anteil verbrauchsoptimierter Verbrennungsmotoren, insbesondere Diesel, ist in Europa in den letzten Jahren rasant gestiegen. Die Waermeabgabe dieser Motoren ist inzwischen so niedrig, dass fuer eine rasche und komfortable Aufheizung der Fahrzeugkabine Zuheizsysteme eingesetzt werden muessen. Beim Einsatz von Kohlendioxid (R744) als Kaeltemittel einer Klimaanlage, ist auch ein Betrieb der Klimaanlage als Zuheizsystem denkbar. In diesem Beitrag werden die konventionellen Zuheizsysteme PTC-Zuheizer und Brennstoffzuheizer mit drei R744-Zuheizsystemen mittels Simulation bezueglich Aufheizverhalten, Kraftstoffverbrauch und Kosten bewertet. Die R744 Zuheizsysteme sind Luft-Luft Waermepumpe, Kuehlmittel-Luft-Waermepumpe und Dreiecksprozess. Mit den Simulationsmodellen wurden Berechnungen einer bedarfsorientierten Aufheizung fuer verschiedene Umgebungstemperaturen auf Basis eines

Experimental Assessment of residential split type air-conditioning systems using alternative refrigerants to R-22 at high ambient temperatures

International Nuclear Information System (INIS)

Joudi, Khalid A.; Al-Amir, Qusay R.

2014-01-01

Highlights: • R290, R407C and R410A in residential split A/C units at high ambient. • 1 and 2 TR residential air conditioners with R22 alternatives at high ambient. • Residential split unit performance at ambients up to 55 °C with R22 alternatives. - Abstract: Steady state performance of residential air conditioning systems using R22 and alternatives R290, R407C, R410A, at high ambient temperatures, have been investigated experimentally. System performance parameters such as optimum refrigerant charge, coefficient of performance, cooling capacity, power consumption, pressure ratio, power per ton of refrigeration and TEWI environmental factor have been determined. All refrigerants were tested in the cooling mode operation under high ambient air temperatures, up to 55 °C, to determine their suitability. Two split type air conditioner of 1 and 2 TR capacities were used. A psychrometric test facility was constructed consisting of a conditioned cool compartment and an environmental duct serving the condenser. Air inside the conditioned compartment was maintained at 25 °C dry bulb and 19 °C wet bulb for all tests. In the environmental duct, the ambient air temperature was varied from 35 °C to 55 °C in 5 °C increments. The study showed that R290 is the better candidate to replace R22 under high ambient air temperatures. It has lower TEWI values and a better coefficient of performance than the other refrigerants tested. It is suitable as a drop-in refrigerant. R407C has the closest performance to R22, followed by R410A

Regulation of a Glycerol-Induced Quinoprotein Alcohol Dehydrogenase by σ54 and a LuxR-Type Regulator in Azospirillum brasilense Sp7.

Science.gov (United States)

Singh, Vijay Shankar; Dubey, Ashutosh Prakash; Gupta, Ankush; Singh, Sudhir; Singh, Bhupendra Narain; Tripathi, Anil Kumar

2017-07-01

Azospirillum brasilense Sp7 uses glycerol as a carbon source for growth and nitrogen fixation. When grown in medium containing glycerol as a source of carbon, it upregulates the expression of a protein which was identified as quinoprotein alcohol dehydrogenase (ExaA). Inactivation of exaA adversely affects the growth of A. brasilense on glycerol. A determination of the transcription start site of exaA revealed an RpoN-dependent -12/-24 promoter consensus. The expression of an exaA :: lacZ fusion was induced maximally by glycerol and was dependent on σ 54 Bioinformatic analysis of the sequence flanking the -12/-24 promoter revealed a 17-bp sequence motif with a dyad symmetry of 6 nucleotides upstream of the promoter, the disruption of which caused a drastic reduction in promoter activity. The electrophoretic mobility of a DNA fragment containing the 17-bp sequence motif was retarded by purified EraR, a LuxR-type transcription regulator that is transcribed divergently from exaA EraR also showed a positive interaction with RpoN in two-hybrid and pulldown assays. IMPORTANCE Quinoprotein alcohol dehydrogenase (ExaA) plays an important role in the catabolism of alcohols in bacteria. Although exaA expression is thought to be regulated by a two-component system consisting of EraS and EraR, the mechanism of regulation was not known. This study shows the details of the regulation of expression of the exaA gene in A. brasilense We have shown here that exaA of A. brasilense is maximally induced by glycerol and harbors a σ 54 -dependent promoter. The response regulator EraR binds to an inverted repeat located upstream of the exaA promoter. This study shows that a LuxR-type response regulator (EraR) binds upstream of the exaA gene and physically interacts with σ 54 The unique feature of this regulation is that EraR is a LuxR-type transcription regulator that lacks the GAFTGA motif, a characteristic feature of the enhancer binding proteins that are known to interact with σ 54

Building a SuAVE browse interface to R2R's Linked Data

Science.gov (United States)

Clark, D.; Stocks, K. I.; Arko, R. A.; Zaslavsky, I.; Whitenack, T.

2017-12-01

The Rolling Deck to Repository program (R2R) is creating and evaluating a new browse portal based on the SuAVE platform and the R2R linked data graph. R2R manages the underway sensor data collected by the fleet of US academic research vessels, and provides a discovery and access point to those data at its website, www.rvdata.us. R2R has a database-driven search interface, but seeks a more capable and extensible browse interface that could be built off of the substantial R2R linked data resources. R2R's Linked Data graph organizes its data holdings around key concepts (e.g. cruise, vessel, device type, operator, award, organization, publication), anchored by persistent identifiers where feasible. The "Survey Analysis via Visual Exploration" or SuAVE platform (suave.sdsc.edu) is a system for online publication, sharing, and analysis of images and metadata. It has been implemented as an interface to diverse data collections, but has not been driven off of linked data in the past. SuAVE supports several features of interest to R2R, including faceted searching, collaborative annotations, efficient subsetting, Google maps-like navigation over an image gallery, and several types of data analysis. Our initial SuAVE-based implementation was through a CSV export from the R2R PostGIS-enabled PostgreSQL database. This served to demonstrate the utility of SuAVE but was static and required reloading as R2R data holdings grew. We are now working to implement a SPARQL-based ("RDF Query Language") service that directly leverages the R2R Linked Data graph and offers the ability to subset and/or customize output.We will show examples of SuAVE faceted searches on R2R linked data concepts, and discuss our experience to date with this work in progress.

miR-2861 as novel HDAC5 inhibitor in CHO cells enhances productivity while maintaining product quality.

Science.gov (United States)

Fischer, Simon; Paul, Albert Jesuran; Wagner, Andreas; Mathias, Sven; Geiss, Melanie; Schandock, Franziska; Domnowski, Martin; Zimmermann, Jörg; Handrick, René; Hesse, Friedemann; Otte, Kerstin

2015-10-01

Histone deacetylase (HDAC) inhibitors have been exploited for years to improve recombinant protein expression in mammalian production cells. However, global HDAC inhibition is associated with negative effects on various cellular processes. microRNAs (miRNAs) have been shown to regulate gene expression in almost all eukaryotic cell types by controlling entire cellular pathways. Since miRNAs recently have gained much attention as next-generation cell engineering tool to improve Chinese hamster ovary (CHO) cell factories, we were interested if miRNAs are able to specifically repress HDAC expression in CHO cells to circumvent limitations of unspecific HDAC inhibition. We discovered a novel miRNA in CHO cells, miR-2861, which was shown to enhance productivity in various recombinant CHO cell lines. Furthermore, we demonstrate that miR-2861 might post-transcriptionally regulate HDAC5 in CHO cells. Intriguingly, siRNA-mediated HDAC5 suppression could be demonstrated to phenocopy pro-productive effects of miR-2861 in CHO cells. This supports the notion that miRNA-induced inhibition of HDAC5 may contribute to productivity enhancing effects of miR-2861. Furthermore, since product quality is fundamental to safety and functionality of biologics, we examined the effect of HDAC inhibition on critical product quality attributes. In contrast to unspecific HDAC inhibition using VPA, enforced expression of miR-2861 did not negatively influence antibody aggregation or N-glycosylation. Our findings highlight the superiority of miRNA-mediated inhibition of specific HDACs and present miR-2861 as novel cell engineering tool for improving CHO manufacturing cells. © 2015 Wiley Periodicals, Inc.

Dysregulated miR-103 and miR-143 expression in peripheral blood mononuclear cells from induced prediabetes and type 2 diabetes rats.

Science.gov (United States)

Vatandoost, Nasimeh; Amini, Masoud; Iraj, Bijan; Momenzadeh, Sedigheh; Salehi, Rasoul

2015-11-01

The progression from normal glucose tolerance (NGT) to type 2 diabetes (T2D) occurs through an intermediate state of glucose intolerance known as pre-diabetes. This transition is usually a gradual phenomenon that occurs over 5-10 years. Among the routinely practiced T2D screening criteria, like, FPG, IFG, IGT or HbA1c, still the issue of a preferable one is debated. The newly emerged microRNAs are created much hope to act as a class of suitable diabetes gene signature detectable at an early stage of the disease development. Although T2D related miRNA fluctuations are reported from the main insulin target organs, sampling of these organs for the sake of screening due to its invasive nature is not practicable. Peripheral blood mononuclear cells (PBMCs) are in constant touch with all body organs hence may exhibit the trace of miRNA changes which take place in insulin target organs. In this study we have evaluated miR-103 and miR-143 expression in three groups of rats namely; normal control, high fat diet (HFD) which is corresponding to prediabetes state, and high fat diet/streptozotocin (STZ) induced T2D. Quantitative real time PCR was used for profiling the selected miRNA expression at various time intervals of the three defined groups of rats. In prediabetes and overt diabetes stages, miR-103 showed significantly elevated expression in PBMC specimens compared to the normal healthy control group. Overexpression pattern of mir-143 was statistically significant in T2D compared to non-diabetic controls. However in HFD (prediabetic) rats also we observed an increasing pattern of miR-143 compared to the normal controls but it was not statistically significant. Copyright © 2015 Elsevier B.V. All rights reserved.

The Stirling engine mechanism optimization

Directory of Open Access Journals (Sweden)

Jiří Podešva

2016-03-01

Full Text Available A special type of the gas engine with external combustion is called Stirling engine. The mechanism has two pistons with two volumes inside. The pistons are connected together through cooler, regenerator and warmer. The engine effectivity depends on the piston movement behaviour. The usual sinusoidal time curve leads to low effectiveness. The quick movement from lower to upper position with a certain delay in both top and bottom dead centres is more effective. The paper deals with three types of mechanisms, analyzing the piston movement, and their behavior. Special emphasize is taken to the piston movement regime.

23rd August 2011 - Turkish Representatives of the Union of Chambers and Commodity Exchanges, E. Uluatam and S. Kologlu, visiting the LHC superconducting magnet test hall with Engineering Department Head R. Saban.

CERN Multimedia

Benoit Jeannet

2011-01-01

23rd August 2011 - Turkish Representatives of the Union of Chambers and Commodity Exchanges, E. Uluatam and S. Kologlu, visiting the LHC superconducting magnet test hall with Engineering Department Head R. Saban.

Systems and Control Engineering

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 5. Systems and Control Engineering - Control Systems-Analysis and Design. A Rama Kalyan J R Vengateswaran. General Article Volume 4 Issue 5 May 1999 pp 88-94 ...

Similarity Theory Based Radial Turbine Performance and Loss Mechanism Comparison between R245fa and Air for Heavy-Duty Diesel Engine Organic Rankine Cycles

Directory of Open Access Journals (Sweden)

Lei Zhang

2017-01-01

Full Text Available Organic Rankine Cycles using radial turbines as expanders are considered as one of the most efficient technologies to convert heavy-duty diesel engine waste heat into useful work. Turbine similarity design based on the existing air turbine profiles is time saving. Due to totally different thermodynamic properties between organic fluids and air, its influence on turbine performance and loss mechanisms need to be analyzed. This paper numerically simulated a radial turbine under similar conditions between R245fa and air, and compared the differences of the turbine performance and loss mechanisms. Larger specific heat ratio of air leads to air turbine operating at higher pressure ratios. As R245fa gas constant is only about one-fifth of air gas constant, reduced rotating speeds of R245fa turbine are only 0.4-fold of those of air turbine, and reduced mass flow rates are about twice of those of air turbine. When using R245fa as working fluid, the nozzle shock wave losses decrease but rotor suction surface separation vortex losses increase, and eventually leads that isentropic efficiencies of R245fa turbine in the commonly used velocity ratio range from 0.5 to 0.9 are 3%–4% lower than those of air turbine.

Dynamic simulation of a beta-type Stirling engine with cam-drive mechanism via the combination of the thermodynamic and dynamic models

Energy Technology Data Exchange (ETDEWEB)

Cheng, Chin-Hsiang; Yu, Ying-Ju [Department of Aeronautics and Astronautics, National Cheng Kung University, No. 1, Ta-Shieh Road, Tainan, Taiwan (China)

2011-02-15

Dynamic simulation of a beta-type Stirling engine with cam-drive mechanism used in concentrating solar power system has been performed. A dynamic model of the mechanism is developed and then incorporated with the thermodynamic model so as to predict the transient behavior of the engine in the hot-start period. In this study, the engine is started from an initial rotational speed. The torques exerted by the flywheel of the engine at any time instant can be calculated by the dynamic model as long as the gas pressures in the chambers, the mass inertia, the friction force, and the external load have been evaluated. The instantaneous rotation speed of the engine is then determined by integration of the equation of rotational motion with respect to time, which in return affects the instantaneous variations in pressure and other thermodynamic properties of the gas inside the chambers. Therefore, the transient variations in gas properties inside the engine chambers and the dynamic behavior of the engine mechanism should be handled simultaneously via the coupling of the thermodynamic and dynamic models. An extensive parametric study of the effects of different operating and geometrical parameters has been performed, and results regarding the effects of mass moment of inertia of the flywheel, initial rotational speed, initial charged pressure, heat source temperature, phase angle, gap size, displacer length, and piston stroke on the engine transient behavior are investigated. (author)

Comparison of the combustion engine operating parameters and the ecological indicators of an urban bus in dynamic type approval tests and in actual operating conditions

Directory of Open Access Journals (Sweden)

Rymaniak Lukasz

2017-01-01

Full Text Available The article presents the considerations regarding a city bus combustion engine performanceparameters in dynamic type approval tests and in real operating conditions when servicing an urban bus line. A comparison of the designated engine operating time shares with respect to load and crankshaft rotational speed was made. The analysis included the ETC and WHTC tests, which showed significant discrepancies in the work areas of internal combustion engines in these test when compared to actual driving conditions. The details of the type approval tests used and the method of their denormalization for the drive unit were presented. The vehicle used for this research was an eighteen meter city bus equipped with a CI engine with a displacement of 9.2 dm3. The latest PEMS mobile equipment technology was used to conduct the road measurements. This allowed the emission indicators for CO, HC, NOx and PM to be determined, including specific emissions. The obtained values were then compared with the Euro V limits.The analysis of the test results was supplemented with the calculation of fuel consumption using the carbonbalance method.

AECL R and D's role in promoting nuclear research and education

International Nuclear Information System (INIS)

Sadhankar, R.

2009-01-01

Nuclear renaissance has created new opportunities for new technology development and has also brought along the challenge of meeting the growing demand of trained personnel in the nuclear science and engineering. Towards meeting this challenge, AECL R and D organization is actively promoting and supporting the creation of nuclear research capabilities at the universities and also effectively leveraging the R and D at the universities. It has also put in place several new initiatives to attract and develop the talented young people for careers in nuclear science and engineering. This paper describes various interactions and collaborations with the universities that supports the nuclear R and D at the universities and develop highly qualified personnel for the future nuclear R and D needs. (author)

R7T7-type HLW glass alteration under irradiation. Study of the residual alteration rate regime

International Nuclear Information System (INIS)

Rolland, Severine

2012-01-01

In France, fission products and minor actinides remaining after reprocessing of spent nuclear fuel are confined in a borosilicate glass matrix, named R7T7, for disposal in a geological repository. However, in these conditions, after several thousand years, water could arrive in contact with glass and be radio-lysed. In this work, we investigated the irradiation influence and especially the influence of the energy deposition on the residual glass alteration rate regime in pure water. Two types of leaching tests have been carried out. The first were performed on radioactive glass and the second on a SON68 glass (nonradioactive surrogate of R7T7 glass) under external irradiation γ. (author) [fr

On R-duals and the duality principle

DEFF Research Database (Denmark)

Christensen, Ole; Stoeva, Diana

2015-01-01

. In this paper we discuss the relationship between the R-duals and a variant, called R-duals of type III, introduced in 2014. In contrast to the original R-duals, it is known that the R-duals of type III generalize the duality principle for all Gabor frames, but we believe that a smaller and more convenient...

FBR Plant Engineering Center annual report 2012

International Nuclear Information System (INIS)

2013-12-01

This annual report shows the last year's R and D activities of currently-reorganized FBR Plant Engineering Center, which was established on April 1, 2009. FBR Safety Technology Center was founded on April 1, 2013 by the consolidation of both the activities of 'former FBR Plant Engineering Center' and a portion of 'FBR Safety Evaluation Unit, Advanced Nuclear System Research and Development Directorate', especially concentrating on safety evaluations and analyses for severe accidents. As for FBR safety technology, it is necessary to continuously make an effort for compliance with new safety regulations in preparation for 'Monju' to restart, for safety enhancement evaluation and for safety technology upgrading. In this context, the new organization was founded in order to reinforce the safety evaluation capability, which will surely and steadily promote FBR safety-technology related activities. As a result, FBR Plant Engineering Center was abolished. This report summarizes the R and D activities at the former FBR Plant Engineering Center, aiming at contributing to the commercialization by using operation experiences and technology development results derived from the actual reactor 'Monju'. The activities are divided into five areas of operation-and-maintenance engineering, sodium engineering, reactor-core-and-fuel engineering, plant engineering, and safety engineering. This annual report is intended for a report of the activities of individual researcher in the center rather than that of the progress of the center as a whole. This will clarify the individual themes, progresses and problems of each researcher, which will, hopefully, facilitate communication with the outside researchers. (author)

Activation of type 2 cannabinoid receptors (CB2R) promotes fatty acid oxidation through the SIRT1/PGC-1α pathway

Energy Technology Data Exchange (ETDEWEB)

Zheng, Xuqin [Department of Endocrinology, First Affiliated Hospital, Nanjing Medical University, Nanjing, Jiangsu Province 210029 (China); Sun, Tao [Department of Neurology, Jinling Hospital, Nanjing University School of Medicine, Nanjing, Jiangsu Province 210002 (China); Wang, Xiaodong, E-mail: xdwang666@hotmail.com [Department of Endocrinology, First Affiliated Hospital, Nanjing Medical University, Nanjing, Jiangsu Province 210029 (China)

2013-07-05

Highlights: •TC, a CB2R specific agonist, stimulates SIRT1 activity by PKA/CREB pathway. •TC promotes PGC-1α transcriptional activity by increasing its deacetylation. •TC increases the expression of genes linked to FAO and promotes the rate of FAO. •The effects of TC in FAO are dependent on CB2R. •Suggesting CB2R as a target to treat diseases with lipid dysregulation. -- Abstract: Abnormal fatty acid oxidation has been associated with obesity and type 2 diabetes. At the transcriptional level, peroxisome proliferator-activated receptor-gamma coactivator 1α (PGC-1α) has been reported to strongly increase the ability of hormone nuclear receptors PPARα and ERRα to drive transcription of fatty acid oxidation enzymes. In this study, we report that a specific agonist of the type 2 cannabinoid receptor (CB2R) can lead to fatty acid oxidation through the PGC-1α pathway. We have found that CB2R is expressed in differentiated C2C12 myotubes, and that use of the specific agonist trans-caryophyllene (TC) stimulates sirtuin 1 (SIRT1) deacetylase activity by increasing the phosphorylation of cAMP response element-binding protein (CREB), thus leading to increased levels of PGC-1α deacetylation. This use of TC treatment increases the expression of genes linked to the fatty acid oxidation pathway in a SIRT1/PGC-1α-dependent mechanism and also drastically accelerates the rate of complete fatty acid oxidation in C2C12 myotubes, neither of which occur when CB2R mRNA is knocked down using siRNA. These results reveal that activation of CB2R by a selective agonist promotes lipid oxidation through a signaling/transcriptional pathway. Our findings imply that pharmacological manipulation of CB2R may provide therapeutic possibilities to treat metabolic diseases associated with lipid dysregulation.

Evolution of R5 and X4 human immunodeficiency virus type 1 gag sequences in vivo: evidence for recombination

International Nuclear Information System (INIS)

Rij, Ronald P. van; Worobey, Michael; Visser, Janny A.; Schuitemaker, Hanneke

2003-01-01

Human immunodeficiency virus type 1 (HIV-1) infection is in general established by CCR5-utilizing (R5) virus variants, which persist throughout the course of infection. R5 HIV-1 variants evolve into CXCR4-utilizing (X4) HIV-1 variants in approximately half of the infected individuals. We have previously observed an ongoing genetic evolution with a continuous divergence of envelope gp120 sequences of coexisting R5 and X4 virus variants over time. Here, we studied evolution of gag p17 sequences in two patients who developed X4 variants in the course of infection. In contrast to the envelope gp120 sequences, gag p17 sequences of R5 and X4 virus populations intermingled in phylogenetic trees and did not diverge from each other over time. Statistical evaluation using the Shimodaira-Hasegawa test indicated that the different genomic regions evolved along different topologies, supporting the hypothesis of recombination. Therefore, our data imply that recombination between R5 and X4 HIV-1 variants occurs in vivo

Specificity of the E. coli LysR-type transcriptional regulators.

Directory of Open Access Journals (Sweden)

Gwendowlyn S Knapp

2010-12-01

Full Text Available Families of paralogous oligomeric proteins are common in biology. How the specificity of assembly evolves is a fundamental question of biology. The LysR-Type Transcriptional Regulators (LTTR form perhaps the largest family of transcriptional regulators in bacteria. Because genomes often encode many LTTR family members, it is assumed that many distinct homooligomers are formed simultaneously in the same cell without interfering with each other's activities, suggesting specificity in the interactions. However, this assumption has not been systematically tested.A negative-dominant assay with λcI repressor fusions was used to evaluate the assembly of the LTTRs in E. coli K-12. Thioredoxin (Trx-LTTR fusions were used to challenge the homooligomeric interactions of λcI-LTTR fusions. Eight cI-LTTR fusions were challenged with twenty-eight Trx fusions. LTTRs could be divided into three classes based on their interactions with other LTTRs.Multimerization of LTTRs in E. coli K-12 is mostly specific. However, under the conditions of the assay, many LTTRs interact with more than one noncognate partner. The physiological significance and physical basis for these interactions are not known.

Climatic wind tunnel for wind engineering tasks

Czech Academy of Sciences Publication Activity Database

Kuznetsov, Sergeii; Pospíšil, Stanislav; Král, Radomil

2015-01-01

Roč. 112, 2-B (2015), s. 303-316 ISSN 1897-628X R&D Projects: GA ČR(CZ) GA14-12892S Keywords : climatic tunnel * wind tunnel * atmospheric boundary layer * flow resistance * wind tunnel contraction Subject RIV: JM - Building Engineering https://suw.biblos.pk.edu.pl/resources/i5/i6/i6/i7/i6/r56676/KuznetsovS_ClimaticWind.pdf

Network configuration of global R&D networks

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Srai, Jagjit Singh

2011-01-01

, network configuration of global R&D has tended to focus on strategic elements with limited attention given operational effectiveness, or to interfaces with downstream manufacturing operations. Within OM literature, the drivers of configuration of global networks within, engineering, production, supply...... to R&D networks emerged, e.g. product features were more prominent in R&D networks. Furthermore, the study has shown extensive interaction with other operations, including many downstream manufacturing operations. By extending the OM configuration concepts to the configuration of R&D networks......Companies are increasingly globalising their R&D activities, both within the firms and with external partners, with consequent implications for their interaction with manufacturing operations. Previous research in R&D networks has focused on coordination, governance and support elements. However...

The new engine generation of the R4 TFSI from Audi; Die neue Motorengeneration des R4 TFSI von Audi

Energy Technology Data Exchange (ETDEWEB)

Heiduk, T.; Dornhoefer, R.; Eiser, A.; Grigo, M.; Pelzer, A.; Wurms, R [Audi AG, Ingolstadt (Germany)

2011-07-01

The new 1.8l TFSI engine in the Audi B8 family (A4, A5) is the third generation of the fourcylinder inline TFSI technology to be launched onto the market by Audi. The engine has been completely revised in order to meet ambitious CO2 targets and ensure compliance with future EU6 emissions standards. The development also incorporated other strategic objectives, such as cross-market applicability and integration into the VW Group's worldwide manufacturing network, as ongoing key elements of the EA888 global engine family. The new generation features numerous innovative technologies, including a cooled exhaust manifold integrated into the cylinder head, a combined FSI/MPI fuel injection system with 200 bar high-pressure injection, and the Audi valve lift system [1, 2] on the exhaust side in combination with an exhaust camshaft adjuster. A particular highlight is the world's first deployment of an entirely newly developed rotary slide control system to implement intelligent thermo-management. Bringing together all the fundamental revisions to components with a view to optimising thermodynamics, friction and weight, the first embodiment of this new engine generation - the 1.8l TFSI - represents a new benchmark in its class in terms of fuel efficiency and performance. (orig.)

Dynamic Linear Models with R

CERN Document Server

Campagnoli, Patrizia; Petris, Giovanni

2009-01-01

State space models have gained tremendous popularity in as disparate fields as engineering, economics, genetics and ecology. Introducing general state space models, this book focuses on dynamic linear models, emphasizing their Bayesian analysis. It illustrates the fundamental steps needed to use dynamic linear models in practice, using R package.

The R117A variant of the Escherichia coli transacylase FabD synthesizes novel acyl-(acyl carrier proteins).

Science.gov (United States)

Marcella, Aaron M; Barb, Adam W

2017-12-01

The commercial impact of fermentation systems producing novel and biorenewable chemicals will flourish with the expansion of enzymes engineered to synthesize new molecules. Though a small degree of natural variability exists in fatty acid biosynthesis, the molecular space accessible through enzyme engineering is fundamentally limitless. Prokaryotic fatty acid biosynthesis enzymes build carbon chains on a functionalized acyl carrier protein (ACP) that provides solubility, stability, and a scaffold for interactions with the synthetic enzymes. Here, we identify the malonyl-coenzyme A (CoA)/holo-ACP transacylase (FabD) from Escherichia coli as a platform enzyme for engineering to diversify microbial fatty acid biosynthesis. The FabD R117A variant produced novel ACP-based primer and extender units for fatty acid biosynthesis. Unlike the wild-type enzyme that is highly specific for malonyl-CoA to produce malonyl-ACP, the R117A variant synthesized acetyl-ACP, succinyl-ACP, isobutyryl-ACP, 2-butenoyl-ACP, and β-hydroxybutyryl-ACP among others from holo-ACP and the corresponding acyl-CoAs with specific activities from 3.7 to 120 nmol min -1  mg -1 . FabD R117A maintained K M values for holo-ACP (~ 40 μM) and displayed small changes in K M for acetoacetyl-CoA (110 ± 30 μM) and acetyl-CoA (200 ± 70 μM) when compared to malonyl-CoA (80 ± 30 μM). FabD R117A represents a novel catalyst that synthesizes a broad range of acyl-acyl-ACPs.

The immunoglobulin superfamily member CD200R identifies cells involved in type 2 immune responses

DEFF Research Database (Denmark)

Blom, Lars H; Martel, Britta C; Larsen, Lau F

2017-01-01

of this investigation was to identify surface markers associated with type 2 inflammation. METHODS: Naïve human CD4(+) T-cells were short-term activated in the presence or absence of IL-4, and analysed for expression of >300 cell-surface proteins. Ex vivo isolated PBMCs from peanut and non-allergic allergic subjects......, were stimulated (14-16h) with peanut extract to detect peanut-specific CD4(+) CD154(+) T-cells. Biopsies were obtained for transcriptomic analysis from healthy controls and patients with extrinsic or intrinsic atopic dermatitis and psoriasis. RESULTS: Expression analysis of >300 surface proteins...... and ILC2 cells and basophils. In peanut-allergic subjects the peanut-specific Th2 (CD154(+) CRTh2(+) ) cells expressed more CD200R than the non-allergen specific Th2 (CD154(-) CRTh2(+) ) cells. Moreover, co-staining of CD161 and CD200R identified peanut-specific highly differentiated IL-4(+) IL-5(+) Th2...

An R2R3-MYB transcription factor regulates carotenoid pigmentation in Mimulus lewisii flowers.

Science.gov (United States)

Sagawa, Janelle M; Stanley, Lauren E; LaFountain, Amy M; Frank, Harry A; Liu, Chang; Yuan, Yao-Wu

2016-02-01

Carotenoids are yellow, orange, and red pigments that contribute to the beautiful colors and nutritive value of many flowers and fruits. The structural genes in the highly conserved carotenoid biosynthetic pathway have been well characterized in multiple plant systems, but little is known about the transcription factors that control the expression of these structural genes. By analyzing a chemically induced mutant of Mimulus lewisii through bulk segregant analysis and transgenic experiments, we have identified an R2R3-MYB, Reduced Carotenoid Pigmentation 1 (RCP1), as the first transcription factor that positively regulates carotenoid biosynthesis during flower development. Loss-of-function mutations in RCP1 lead to down-regulation of all carotenoid biosynthetic genes and reduced carotenoid content in M. lewisii flowers, a phenotype recapitulated by RNA interference in the wild-type background. Overexpression of this gene in the rcp1 mutant background restores carotenoid production and, unexpectedly, results in simultaneous decrease of anthocyanin production in some transgenic lines by down-regulating the expression of an activator of anthocyanin biosynthesis. Identification of transcriptional regulators of carotenoid biosynthesis provides the 'toolbox' genes for understanding the molecular basis of flower color diversification in nature and for potential enhancement of carotenoid production in crop plants via genetic engineering. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

Experimental investigation of gasoline compression ignition combustion in a light-duty diesel engine

Science.gov (United States)

Loeper, C. Paul

fuel consumption (gross indicated fuel consumption Gasoline," SAE Int. J. Engines, 4(1), pp. 1169-1189. [2] Kalghatgi, G., Hildingsson, L., and Johansson, B., 2010, "Low NO(x) and Low Smoke Operation of a Diesel Engine Using Gasolinelike Fuels," Journal of Engineering for Gas Turbines and Power-Transactions of the Asme, 132(9), p. 9. [3] Manente, V., Zander, C.-G., Johansson, B., Tunestal, P., and Cannella, W., 2010, "An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially Premixed Combustion," SAE International, 2010-01-2198. [4] Ra, Y., Loeper, P., Reitz, R., Andrie, M., Krieger, R., Foster, D., Durrett, R., Gopalakrishnan, V., Plazas, A., Peterson, R., and Szymkowicz, P., 2011, "Study of High Speed Gasoline Direct Injection Compression Ignition (GDICI) Engine Operation in the LTC Regime," SAE Int. J. Engines, 4(1), pp. 1412-1430. [5] Ra, Y., Loeper, P., Andrie, M., Krieger, R., Foster, D., Reitz, R., and Durrett, R., 2012, "Gasoline DICI Engine Operation in the LTC Regime Using Triple- Pulse Injection," SAE Int. J. Engines, 5(3), pp. 1109-1132.

Facteurs prédictifs du fonctionnement chez les patients bipolaires de type 1 en période de rémission

Science.gov (United States)

Fekih-Romdhane, Feten; Homri, Wided; Mrabet, Ali; Labbane, Raja

2016-01-01

Introduction Les études récentes indiquent que le trouble bipolaire est associé à une déficience profonde dans presque tous les domaines de fonctionnement. La présente étude vise à évaluer le fonctionnement au sein d'une population de patients bipolaires type I en rémission. Méthodes Il s'agit d'une étude transversale réalisée auprès des patients bipolaires type I euthymiques et suivis en ambulatoire. Ont été utilisés l'échelle de dépression de Hamilton, l'échelle de manie de Young, l'Echelle d'Estime de Soi de Rosenberg, et le Functioning Assessment Short Test. Résultats Plus de la moitié de la population (53,3%) avaient une déficience fonctionnelle globale. Le fonctionnement global était associé à l'âge, au niveau scolaire, à l'activité professionnelle, au nombre d'épisodes maniaques et dépressifs, au nombre d'hospitalisations, à un score HDRS plus élevé, ainsi qu'aux deux sous-scores d'estime de soi « confiance en soi » et « autodépréciation ». Conclusion Nos résultats suggèrent qu'un changement de paradigme dans le traitement des troubles bipolaires devrait se produire, et que les objectifs de la thérapie devraient être modifiés d'une rémission symptomatique à une rémission fonctionnelle. PMID:28292029

Dynamic culture induces a cell type-dependent response impacting on the thickness of engineered connective tissues.

Science.gov (United States)

Fortier, Guillaume Marceau; Gauvin, Robert; Proulx, Maryse; Vallée, Maud; Fradette, Julie

2013-04-01

Mesenchymal cells are central to connective tissue homeostasis and are widely used for tissue-engineering applications. Dermal fibroblasts and adipose-derived stromal cells (ASCs) allow successful tissue reconstruction by the self-assembly approach of tissue engineering. This method leads to the production of multilayered tissues, devoid of exogenous biomaterials, that can be used as stromal compartments for skin or vesical reconstruction. These tissues are formed by combining cell sheets, generated through cell stimulation with ascorbic acid, which favours the cell-derived production/organization of matrix components. Since media motion can impact on cell behaviour, we investigated the effect of dynamic culture on mesenchymal cells during tissue reconstruction, using the self-assembly method. Tissues produced using ASCs in the presence of a wave-like movement were nearly twice thicker than under standard conditions, while no difference was observed for tissues produced from dermal fibroblasts. The increased matrix deposition was not correlated with an increased proliferation of ASCs, or by higher transcript levels of fibronectin or collagens I and III. A 30% increase of type V collagen mRNA was observed. Interestingly, tissues engineered from dermal fibroblasts featured a four-fold higher level of MMP-1 transcripts under dynamic conditions. Mechanical properties were similar for tissues reconstructed using dynamic or static conditions. Finally, cell sheets produced using ASCs under dynamic conditions could readily be manipulated, resulting in a 2 week reduction of the production time (from 5 to 3 weeks). Our results describe a distinctive property of ASCs' response to media motion, indicating that their culture under dynamic conditions leads to optimized tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.

The Westerbork HI survey of spiral and irregular galaxies - II. R-band surface photometry of late-type dwarf galaxies

NARCIS (Netherlands)

Swaters, RA; Balcells, M

R-band surface photometry is presented for 171 late-type dwarf and irregular galaxies. For a subsample of 46 galaxies B-band photometry is presented as well. We present surface brightness profiles as well as isophotal and photometric parameters including magnitudes, diameters and central surface

Mutation-Induced Population Shift in the MexR Conformational Ensemble Disengages DNA Binding: A Novel Mechanism for MarR Family Derepression.

Science.gov (United States)

Anandapadamanaban, Madhanagopal; Pilstål, Robert; Andresen, Cecilia; Trewhella, Jill; Moche, Martin; Wallner, Björn; Sunnerhagen, Maria

2016-08-02

MexR is a repressor of the MexAB-OprM multidrug efflux pump operon of Pseudomonas aeruginosa, where DNA-binding impairing mutations lead to multidrug resistance (MDR). Surprisingly, the crystal structure of an MDR-conferring MexR mutant R21W (2.19 Å) presented here is closely similar to wild-type MexR. However, our extended analysis, by molecular dynamics and small-angle X-ray scattering, reveals that the mutation stabilizes a ground state that is deficient of DNA binding and is shared by both mutant and wild-type MexR, whereas the DNA-binding state is only transiently reached by the more flexible wild-type MexR. This population shift in the conformational ensemble is effected by mutation-induced allosteric coupling of contact networks that are independent in the wild-type protein. We propose that the MexR-R21W mutant mimics derepression by small-molecule binding to MarR proteins, and that the described allosteric model based on population shifts may also apply to other MarR family members. Copyright © 2016 Elsevier Ltd. All rights reserved.

HPLC analysis of aldehydes in automobile exhaust gas: Comparison of exhaust odor and irritation in different types of gasoline and diesel engines

International Nuclear Information System (INIS)

Roy, Murari Mohon

2008-01-01

This study investigated high performance liquid chromatography (HPLC) to identify and measure aldehydes from automobile exhaust gas. Four aldehydes: formaldehyde (HCHO), acetaldehyde (CH 3 CHO), acrolein (H 2 C=CHCHO) and propionaldehyde (CH 3 CH 2 CHO) and one ketone, acetone (CH 3 ) 2 CO are separated. The other higher aldehydes in exhaust gas are very small and cannot be separated. A new method of gas sampling, hereafter called bag sampling in HPLC is introduced instead of the trapping gas sampling method. The superiority of the bag sampling method is its transient gas checking capability. In the second part of this study, HPLC results are applied to compare exhaust odor and irritation of exhaust gases in different types of gasoline and diesel engines. Exhaust odor, irritation and aldehydes are found worst in direct injection (DI) diesel engines and best in some good multi-point injection (MPI) gasoline and direct injection gasoline (DIG) engines. Indirect injection (IDI) diesel engines showed odor, irritation and aldehydes in between the levels of MPI gasoline, DIG and DI diesel engines

The experimental investigation of refrigerant distribution and leaking characteristics of R290 in split type household air conditioner

International Nuclear Information System (INIS)

Tang, Weier; He, Guogeng; Cai, Dehua; Zhu, Yihao; Zhang, Aoni; Tian, Qiqi

2017-01-01

Highlights: • A new quasi-liquid nitrogen method (QLNM) was proposed and firstly applied in experiments. • The R290 distribution was investigated by QLNM and the results proved the validation. • A solenoid valve was proposed to install near the capillary in STHAC in order to reduce risk factor. • R290 leaking rate was firstly measured by QLNM before and after the installation a solenoid valve. - Abstract: As a high-profile replacement for R22 split type household air conditioner (STHAC), R290 has several advantages in terms of thermodynamic properties, environmental characteristics, and cost. However, the obvious shortcoming of R290 is its flammability, which has a potential fire risk to the building. At present, the most important measure to ensure the safety of a R290 STHAC is to limit the refrigerant charge by domestic and international standards. But in fact, when the leakage of R290 occur from a STHAC, the distribution of R290 in STHAC, and the leaking rate also will seriously affect the safety of an R290 STHAC. In this study, a new quasi-liquid nitrogen method (QLNM) has been proposed in order to investigate the refrigerant distribution in R290 STHACs and the leaking rate under various conditions, and the experiments have been conducted. The experimental results of distribution proved the validation of the QLNM and showed that a large portion of the refrigerant distributed in the condenser when the air conditioner is on running stage and the refrigerant will migrate from the condenser to the evaporator when the air conditioner is on closed stage. Based on this, the installation of a solenoid valve near the capillary has been proposed. The comparison of experimental results of R290 leaking rate before and after the installation of a solenoid valve showed it will obviously reduce the leaking rate and thereby improve the safety of the R290 STHACs.

Engineering Significant of Swelling Soils

OpenAIRE

Behzad Kalantari

2012-01-01

This study describes some of the most important swelling characters of expansive soils when used as foundation materials to support various types of civil engineering structures. Expansive soils are considered among difficult foundation materials and expand upon wetting and shrink upon losing moisture. They are considered problematic soils for architectural and civil engineers. These types of soils may cause minor to major structural damages to pavements as well as buildings. It is therefore ...

An Innovative Approach for online Meta Search Engine Optimization

OpenAIRE

Manral, Jai; Hossain, Mohammed Alamgir

2015-01-01

This paper presents an approach to identify efficient techniques used in Web Search Engine Optimization (SEO). Understanding SEO factors which can influence page ranking in search engine is significant for webmasters who wish to attract large number of users to their website. Different from previous relevant research, in this study we developed an intelligent Meta search engine which aggregates results from various search engines and ranks them based on several important SEO parameters. The r...

Type I and type II interferons upregulate functional type I interleukin-1 receptor in a human fibroblast cell line TIG-1.

Science.gov (United States)

Takii, T; Niki, N; Yang, D; Kimura, H; Ito, A; Hayashi, H; Onozaki, K

1995-12-01

The regulation of type I interleukin-1 receptor (IL-1R) expression by type I, interferon (IFN)-alpha A/D, and type II IFN, IFN-gamma, in a human fibroblast cell line TIG-1 was investigated. After 2 h stimulation with human IFN-alpha A/D or IFN-gamma, the levels of type I IL-1R mRNA increased. We previously reported that IL-1 upregulates transcription and cell surface molecules of type I IL-1R in TIG-1 cells through induction of prostaglandin (PG) E2 and cAMP accumulation. However, indomethacin was unable to inhibit the effect of IFNs, indicating that IFNs augment IL-1R expression through a pathway distinct from that of IL-1. The augmentation was also observed in other fibroblast cell lines. Nuclear run-on assays and studies of the stability of mRNA suggested that the increase in IL-1R mRNA was a result of the enhanced transcription of IL-1R gene. Binding studies using 125I-IL-1 alpha revealed that the number of cell surface IL-1R increased with no change in binding affinity by treatment with these IFNs. Pretreatment of the cells with IFNs enhanced IL-1-induced IL-6 production, indicating that IFNs upregulate functional IL-1R. IL-1 and IFNs are produced by the same cell types, as well as by the adjacent different cell types, and are concomitantly present in lesions of immune and inflammatory reactions. These results therefore suggest that IFNs exhibit synergistic effects with IL-1 through upregulation of IL-1R. Augmented production of IL-6 may also contribute to the reactions.

Systems and Control Engineering

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 1. Systems and Control Engineering - Notions of Control. A Rama Kalyan J R Vengateswaran. General Article Volume 4 Issue 1 January 1999 pp 45-52. Fulltext. Click here to view fulltext PDF. Permanent link:

Synthesis, structure and phase separation of a new 12R-type perovskite-related oxide Ba3NdMn2O9

International Nuclear Information System (INIS)

Yang, H.; Tang, Y.K.; Yao, L.D.; Zhang, W.; Li, Q.A.; Li, F.Y.; Jin, C.Q.; Yu, R.C.

2007-01-01

A new 12R-type perovskite-related oxide, Ba 3 NdMn 2 O 9 , has been prepared by traditional solid-state reaction method and the presence of chemical phase separation phenomenon has been revealed by transmission electron microscopy. The perfect grains of the compound have an average chemical composition of Ba 4 NdMn 3 O 12 (mainly for cationic ratio) according to the characterization by TEM-EDX. In this perfect 12R-type structure with composition Ba 4 NdMn 3 O 12 , the Nd cations are located in the corner-sharing octahedra, whereas the Mn cations are located in the face-sharing octahedra, leading to a remarkable cation ordering. Superstructure modulation was found to be a common phenomenon in the 12R polytype and the modulated areas were revealed by both EDX and EELS to be Nd rich compared to the perfect areas. This result together with the previous work [A.F. Fuentes, K. Boulahya, U. Amador, J. Solid State Chem. 177 (2004) 714] has shown that, for the rare-earth-containing Ba-RE-Mn-O systems (RE being rare-earth elements), the composition Ba 4 REMn 3 O 12 (mainly for cationic ratio) is required for the formation of perfect 12R polytype

Design and R and D activities on ceramic breeder blanket for fusion experimental reactors in JAERI

International Nuclear Information System (INIS)

Kurasawa, T.; Takatsu, H.; Sato, S.; Nakahira, M.; Furuya, K.; Hashimoto, T.; Kawamura, H.; Kuroda, T.; Tsunematsu, T.; Seki, M.

1995-01-01

Design and R and D activities on ceramic breeder blanket of a fusion experimental reactor have been progressed in JAERI. A layered pebble bed type ceramic breeder blanket with water cooling is a prime candidate concept. Design activities have been concentrated on improvement of the design by conducting detailed analyses and also by fabrication procedure consideration based on the current technologies. A wide variety of R and Ds have also been conducted in accordance with the design activities. Development of fabrication technology of the blanket box structure and its mechanical testing, elementary testing on thermal performances of the pebble bed, and engineering-oriented material tests of breeder and beryllium pebbles are the main achievements during the last two years. (orig.)

Magnetic ordering in Sc{sub 2}CoSi{sub 2}-type R{sub 2}FeSi{sub 2} (R=Gd, Tb) and R{sub 2}CoSi{sub 2} (R=Y, Gd–Er) compounds

Energy Technology Data Exchange (ETDEWEB)

Morozkin, A.V., E-mail: morozkin@tech.chem.msu.ru [Department of Chemistry, Moscow State University, Leninskie Gory, House 1, Building 3, GSP-2, Moscow 119992 (Russian Federation); Knotko, A.V. [Department of Chemistry, Moscow State University, Leninskie Gory, House 1, Building 3, GSP-2, Moscow 119992 (Russian Federation); Yapaskurt, V.O. [Department of Petrology, Geological Faculty, Moscow State University, Leninskie Gory, Moscow 119992 (Russian Federation); Pani, M. [Department of Chemistry, University of Genova, Via Dodecaneso 31, 16146 Genova (Italy); Institute SPIN-CNR, C. Perrone 24, 16152 Genova (Italy); Nirmala, R. [Indian Institute of Technology Madras, Chennai 600036 (India); Quezado, S.; Malik, S.K. [Departamento de Física Teórica e Experimental, Universidade Federal do Rio Grande do Norte, Natal 59082-970 (Brazil)

2016-09-01

Magnetic and magnetocaloric properties of Sc{sub 2}CoSi{sub 2}-type R{sub 2}TSi{sub 2} (R=Gd–Er, T=Fe, Co) compounds have been studied using magnetization data. These indicate the presence of mixed ferromagnetic and antiferromagnetic interactions in these compounds. One observes a ferromagnetic transition followed by an antiferromagnetic order and a further possible spin-reorientation transition at low temperatures. Compared to Gd{sub 2}{Fe, Co}Si{sub 2}, the Tb{sub 2}FeSi{sub 2} and {Tb–Er}{sub 2}CoSi{sub 2} compounds exhibit remarkable hysteresis (for e.g. Tb{sub 2}FeSi{sub 2} shows residual magnetization M{sub res}/Tb=2.45 μ{sub B}, coercive field H{sub coer}=14.9 kOe, and critical field H{sub crit}~5 kOe at 5 K) possibly due to the magnetocrystalline anisotropy of the rare earth. The R{sub 2}{Fe, Co}Si{sub 2} show relatively small magnetocaloric effect (i.e. isothermal magnetic entropy change, ΔS{sub m}) around the magnetic transition temperature: the maximal value of MCE is demonstrated by Ho{sub 2}CoSi{sub 2} (ΔS{sub m}=−8.1 J/kg K at 72 K and ΔS{sub m}=−9.4 J/kg K at 23 K in field change of 50 kOe) and Er{sub 2}CoSi{sub 2} (ΔS{sub m}=−13.6 J/kg K at 32 K and ΔS{sub m}=−8.4 J/kg K at 12 K in field change of 50 kOe). - Highlights: • {Gd–Er}{sub 2}{Fe, Co}Si{sub 2} show high-temperature ferromagnetic-type transitions. • {Gd–Er}{sub 2}{Fe, Co}Si{sub 2} show low-temperature spin-reorientation transitions. • Tb{sub 2}FeSi{sub 2} and {Tb–Er}{sub 2}CoSi{sub 2} compounds exhibit low-temperature hysteresis. • Tb{sub 2}FeSi{sub 2} shows M{sub res}/Tb=2.45 μ{sub B}, H{sub coer}=14.9 kOe and H{sub crit} ~5 kOe at 5 K • Considerable magnetocaloric effect is exhibited by Ho{sub 2}CoSi{sub 2} and Er{sub 2}CoSi{sub 2}.

Control of acute, chronic, and constitutive hyperammonemia by wild-type and genetically engineered Lactobacillus plantarum in rodents.

Science.gov (United States)

Nicaise, Charles; Prozzi, Deborah; Viaene, Eric; Moreno, Christophe; Gustot, Thierry; Quertinmont, Eric; Demetter, Pieter; Suain, Valérie; Goffin, Philippe; Devière, Jacques; Hols, Pascal

2008-10-01

Hyperammonemia is a common complication of acute and chronic liver diseases. Often accompanied with side effects, therapeutic interventions such as antibiotics or lactulose are generally targeted to decrease the intestinal production and absorption of ammonia. In this study, we aimed to modulate hyperammonemia in three rodent models by administration of wild-type Lactobacillus plantarum, a genetically engineered ammonia hyperconsuming strain, and a strain deficient for the ammonia transporter. Wild-type and metabolically engineered L. plantarum strains were administered in ornithine transcarbamoylase-deficient Sparse-fur mice, a model of constitutive hyperammonemia, in a carbon tetrachloride rat model of chronic liver insufficiency and in a thioacetamide-induced acute liver failure mice model. Constitutive hyperammonemia in Sparse-fur mice and hyperammonemia in a rat model of chronic hepatic insufficiency were efficiently decreased by Lactobacillus administration. In a murine thioacetamide-induced model of acute liver failure, administration of probiotics significantly increased survival and decreased blood and fecal ammonia. The ammonia hyperconsuming strain exhibited a beneficial effect at a lower dose than its wild-type counterpart. Improved survival in the acute liver failure mice model was associated with lower blood ammonia levels but also with a decrease of astrocyte swelling in the brain cortex. Modulation of ammonia was abolished after administration of the strain deficient in the ammonium transporter. Intestinal pH was clearly lowered for all strains and no changes in gut flora were observed. Hyperammonemia in constitutive model or after acute or chronic induced liver failure can be controlled by the administration of L. plantarum with a significant effect on survival. The mechanism involved in this ammonia decrease implicates direct ammonia consumption in the gut.

Dy–Mn–Si as a representative of family of ‘Dy–Transition Metal–Si’ systems: Its isothermal sections, empirical rProd. Type: FTPules and new rare-earth manganese silicides

Energy Technology Data Exchange (ETDEWEB)

Morozkin, A.V., E-mail: morozkin@general.chem.msu.ru [Department of Chemistry, Moscow State University, Leninskie Gory, House 1, Building 3, GSP-2, Moscow 119992 (Russian Federation); Knotko, A.V. [Department of Chemistry, Moscow State University, Leninskie Gory, House 1, Building 3, GSP-2, Moscow 119992 (Russian Federation); Yapaskurt, V.O. [Department of Petrology, Geological Faculty, Moscow State University, Leninskie Gory, Moscow 119992 (Russian Federation); Provino, A.; Manfrinetti, P. [INFM and Dipartimento di Chimica e Chimica Industriale, Universita di Genova, Via Dodecaneso 31, 16146 Genova (Italy); Yao, Jinlei; Yuan, Fang; Mozharivskyj, Y. [Department of Chemistry and Chemical Biology, McMaster University, 1280 Main Street West, Hamilton, Ontario, Canada L8S 4M1 (Canada)

2013-10-15

X-ray and microprobe analyses were employed for the investigation of Dy–Mn–Si system at 870/1070/1170 K. The Dy–Mn–Si system, contains the known DyMn{sub 2}Si{sub 2}, DyMnSi and Dy{sub 2}Mn{sub 3}Si{sub 5} compounds and DyMn{sub 4}Si{sub 2}, Dy{sub 2}MnSi{sub 2} and Dy{sub 3}Mn{sub 2}Si{sub 3} were new compounds identified first time and their structure are of the type TmCu{sub 4}Sb{sub 2}, Sc{sub 2}CoSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3} respectively. The quasi-binary solid solutions were detected at 870/1070/1170 K: the ThMn{sub 12}-type Dy{sub 8}Mn{sub 87}Si{sub 5}, Th{sub 6}Mn{sub 23}-type Dy{sub 23}Mn{sub 72}Si{sub 5}, MgCu{sub 2}-type Dy{sub 33}Mn{sub 58}Si{sub 9} and AlB{sub 2}-type Dy{sub 38}Mn{sub 2}Si{sub 58}. The other binary compounds of the Dy–Mn–Si system do not show any visible solubility. New phases R{sub 2}MnSi{sub 2} and R{sub 3}Mn{sub 2}Si{sub 3} (R=Gd, Tb, Ho–Tm) were found out and their structure of the type Sc{sub 2}CoSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3} respectively. The specific features of ‘Dy–Transition Metal–Si’ systems were discussed. - Graphical abstract: The isothermal section of Dy–Mn–Si contains the known DyMn{sub 2}Si{sub 2}, DyMnSi, Dy{sub 2}Mn{sub 3}Si{sub 5} and new TmCu{sub 4}Sb{sub 2}-type DyMn{sub 4}Si{sub 2}, Sc{sub 2}CoSi{sub 2}-type Dy{sub 2}MnSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3}-type Dy{sub 3}Mn{sub 2}Si{sub 3} ternary compounds. The ternary solid solution based on the binary compounds of the Dy–Mn and Dy–Si systems: the ThMn{sub 12}-type Dy{sub 8}Mn{sub 87}Si{sub 5}, Th{sub 6}Mn{sub 23}-type Dy{sub 23}Mn{sub 72}Si{sub 5}, MgCu{sub 2}-type Dy{sub 33}Mn{sub 58}Si{sub 9} and AlB{sub 2}-type Dy{sub 38}Mn{sub 2}Si{sub 58}. The other binary compounds of the Dy–Mn–Si system do not show any visible solubility. New Sc{sub 2}CoSi{sub 2}-type R{sub 2}MnSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3}-type R{sub 3}Mn{sub 2}Si{sub 3} phases were discovered for R=Gd, Tb, Ho–Tm. Display Omitted

Engineering Documentation and Data Control

Science.gov (United States)

Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

2001-01-01

Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

Critical component wear in heavy duty engines

CERN Document Server

Lakshminarayanan, P A

2011-01-01

The critical parts of a heavy duty engine are theoretically designed for infinite life without mechanical fatigue failure. Yet the life of an engine is in reality determined by wear of the critical parts. Even if an engine is designed and built to have normal wear life, abnormal wear takes place either due to special working conditions or increased loading.  Understanding abnormal and normal wear enables the engineer to control the external conditions leading to premature wear, or to design the critical parts that have longer wear life and hence lower costs. The literature on wear phenomenon r

Fatigue of internal combustion engines

Science.gov (United States)

Dumanois, P

1924-01-01

The above conditions enable the employment of a criterion of general fatigue which simultaneously takes account of both mechanical and thermal conditions, for the sake of comparing any projected engine with engines of the same type already in use.

14 CFR 121.387 - Flight engineer.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Flight engineer. 121.387 Section 121.387..., FLAG, AND SUPPLEMENTAL OPERATIONS Airman and Crewmember Requirements § 121.387 Flight engineer. No... holding a current flight engineer certificate. For each airplane type certificated after January 1, 1964...

POSSIBLE ORIGIN OF RHIC R OUT/R SID HBT RESULTS

International Nuclear Information System (INIS)

PADULA, S.S.

2002-01-01

The effects of opacity of the nuclei together with a blackbody type of emission along the system history are considered as a means to explain the ratio R out /R sid observed by STAR and PHENIX collaborations at RHIC. Within our model, no flow is required to explain the data trend of this ratio for large surface emissivities

POSSIBLE ORIGIN OF RHIC R OUT / R SID HBT RESULTS

International Nuclear Information System (INIS)

PADULA, S.

2002-01-01

The effects of opacity of the nuclei together with a blackbody type of emission along the system history are considered as a means to explain the ratio R out /R sid observed by STAR and PHENIX collaborations at RHIC. Within our model, no flow is required to explain the data trend of this ratio for large surface emissivities

Introduction of Pseudomonas aeruginosa into a Hospital via Vegetables

Science.gov (United States)

Kominos, Spyros D.; Copeland, Charles E.; Grosiak, Barbara; Postic, Bosko

1972-01-01

Pseudomonas aeruginosa was isolated from tomatoes, radishes, celery, carrots, endive, cabbage, cucumbers, onions, and lettuce obtained from the kitchen of a general hospital, with tomatoes yielding both highest frequencies of isolation and highest counts. Presence of P. aeruginosa on the hands of kitchen personnel and cutting boards and knives which they used suggests acquisition of the organism through contact with these vegetables. It is estimated that a patient consuming an average portion of tomato salad might ingest as many as 5 × 103 colony-forming units of P. aeruginosa. Pyocine types of P. aeruginosa isolated from clinical specimens were frequently identical to those recovered from vegetables, thus implicating tomatoes and other vegetables as an important source and vehicle by which P. aeruginosa colonizes the intestinal tract of patients. PMID:4628795

VizieR Online Data Catalog: R-band light curves of type II supernovae (Rubin+, 2016)

Science.gov (United States)

Rubin, A.; Gal-Yam, A.; De Cia, A.; Horesh, A.; Khazov, D.; Ofek, E. O.; Kulkarni, S. R.; Arcavi, I.; Manulis, I.; Yaron, O.; Vreeswijk, P.; Kasliwal, M. M.; Ben-Ami, S.; Perley, D. A.; Cao, Y.; Cenko, S. B.; Rebbapragada, U. D.; Wozniak, P. R.; Filippenko, A. V.; Clubb, K. I.; Nugent, P. E.; Pan, Y.-C.; Badenes, C.; Howell, D. A.; Valenti, S.; Sand, D.; Sollerman, J.; Johansson, J.; Leonard, D. C.; Horst, J. C.; Armen, S. F.; Fedrow, J. M.; Quimby, R. M.; Mazzali, P.; Pian, E.; Sternberg, A.; Matheson, T.; Sullivan, M.; Maguire, K.; Lazarevic, S.

2016-05-01

Our sample consists of 57 SNe from the PTF (Law et al. 2009PASP..121.1395L; Rau et al. 2009PASP..121.1334R) and the intermediate Palomar Transient Factory (iPTF; Kulkarni 2013ATel.4807....1K) surveys. Data were routinely collected by the Palomar 48-inch survey telescope in the Mould R-band. Follow-up observations were conducted mainly with the robotic 60-inch telescope using an SDSS r-band filter, with additional telescopes providing supplementary photometry and spectroscopy (see Gal-Yam et al. 2011, J/ApJ/736/159). The full list of SNe, their coordinates, and classification spectra are presented in Table 1. Most of the spectra were obtained with the Double Spectrograph on the 5m Hale telescope at Palomar Observatory, the Kast spectrograph on the Shane 3m telescope at Lick Observatory, the Low Resolution Imaging Spectrometer (LRIS) on the Keck I 10m telescope, and the DEep Imaging Multi-Object Spectrograph (DEIMOS) on the Keck II 10m telescope. (2 data files).

FY 1995 annual report on research and development of propulsion systems for supersonic transport aircraft. Pt. 2. Research and development of methane-fueled engines for aircraft; 1995 nendo choonsoku yusokiyo suishin system no kenkyu kaihatsu seika hokokusho. 2. Methane nenryo kokukiyo engine no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Described herein are the R and D results of FY 1995 for the total system as part of R and D of propulsion systems for supersonic transport aircraft. For R and D of the intake, researches on aerodynamic flow passages at a combined intake design point of Mach 5 are conducted, in which the effects of the boundary layer are taken into consideration, and the wind tunnel tests are conducted for the combined intake. For R and D of the nozzle, experiments are conducted to establish the techniques for designing exhaust nozzle variable schedules in the turbo region, aerodynamic force in the turbo and ram regions, cooling systems, and composite liners. For R and D of the turbojet engines, the second phase engine tests are conducted with the engine of improved designs and two-dimensional variable exhaust nozzle. The tests produce good results in terms of engine endurance and mechanical soundness of the low-pressure systems. For R and D of the combined cycle engine incorporating the turbojet and ramjet engines, the model tests are conducted to understand aerodynamic characteristics when these engines are switched to each other. (NEDO)

Experimental investigation on SI engine using gasoline and a hybrid iso-butanol/gasoline fuel

International Nuclear Information System (INIS)

Elfasakhany, Ashraf

2015-01-01

Highlights: • iso-Butanol–gasoline blends (iB) using up to 10 vol.% butanol were examined in SIE. • iB extensively decrease the greenhouse effect of SI engine. • iB without engine tuning led to a drop in engine performance at all speeds. • iB provide higher performance and lower CO and CO 2 emissions than n-butanol blends. • iB grant lower CO and UHC than gasoline at <2900 r/min, but overturn at >2900 r/min. - Abstract: Experimental investigation on pollutant emissions and performance of SI engine fueled with gasoline and iso-butanol–gasoline blends is carried out. Engine was operated at speed range of 2600–3400 r/min for each blend (3, 7 and 10 vol.% iso-butanol) and neat gasoline. Results declare that the CO and UHC emissions of neat gasoline are higher than those of the blended fuels for speeds less than or equal to 2900 r/min; however, for speeds higher than 2900 r/min, we have an opposite impact where the blended fuels produce higher level of CO and UHC emissions than the gasoline fuel. The CO 2 emission at using iso-butanol–gasoline blends is always lower than the neat gasoline at all speeds by up to 43%. The engine performance results demonstrate that using iso-butanol–gasoline blends in SI engine without any engine tuning lead to a drop in engine performance within all speed range. Without modifying the engine system, overall fuel combustion of iso-butanol–gasoline blends was quasi-complete. However, when engine system is optimized for blended fuels, iso-butanol has significant oxygen content and that can lead to a leaner combustion, which improves the completeness of combustion and therefore high performance and less emissions would be obtained. Finally, the performance and emissions of iso-butanol–gasoline blends are compared with those of n-butanol–gasoline blends at similar blended rates and engine working conditions. Such comparison is directed to evaluate the combustion dissimilarity of the two butanol isomers and also to

Stirling Engine Cycle Efficiency

OpenAIRE

Naddaf, Nasrollah

2012-01-01

ABSTRACT This study strives to provide a clear explanation of the Stirling engine and its efficiency using new automation technology and the Lab View software. This heat engine was invented by Stirling, a Scottish in 1918. The engine’s working principles are based on the laws of thermodynamics and ability of volume expansion of ideal gases at different temperatures. Basically there are three types of Stirling engines: the gamma, beta and alpha models. The commissioner of the thesis ...

Fuel characterisation, engine performance, combustion and exhaust emissions with a new renewable Licella biofuel

International Nuclear Information System (INIS)

Nabi, Md Nurun; Rahman, Md Mostafizur; Islam, Muhammad Aminul; Hossain, Farhad M.; Brooks, Peter; Rowlands, William N.; Tulloch, John; Ristovski, Zoran D.; Brown, Richard J.

2015-01-01

Highlights: • A new biofuel produced by hydrothermal liquefaction is investigated. • Licella biofuel blends showed no significant changes in engine performance. • Licella blends showed higher THC and NO emissions. • PM and PN emissions were observed to be lower for all Licella blends. • Hydrothermal liquefaction Licella biofuel is suitable for use in diesel engine. - Abstract: The current study investigates the opportunity of using Licella biofuel as a partly renewable fuel provided by Licella P/L. Hereafter this fuel will be referred to as Licella biofuel. The renewable component of the Licella biofuel was made from the hydrothermal conversion of Australian pinus radiata wood flour using Licella’s proprietary Cat-HTR™ technology. The diesel-soluble component of the hydrothermal product was extracted into road diesel to give a blended fuel containing approximately 30% renewable material with the balance from diesel. This was further blended with a regular diesel fuel (designated R0) to give fuels for testing containing 5%, 10% and 20% renewable fuel (designated R5, R10 and R20). Some of the key fuel properties were measured for R30 and compared with those of regular diesel fuel. The engine experiment was conducted on a four-cylinder turbocharged common rail direct injection diesel engine. All experiments were performed with a constant speed and five different engine loads. Exhaust emissions including particulate matter (PM) mass and numbers, nitric oxide (NO), total unburnt hydrocarbon (THC), carbon dioxide (CO 2 ) and performance parameters including brake power (BP), indicated power (IP), brake mean effective pressure (BMEP), indicated mean effective pressure (IMEP), mechanical efficiency (ME), brake thermal efficiency (BTE) and brake specific energy consumption (BSEC) were investigated for all four blends (R0, R5, R10 and R20). Among other engine parameters, in-cylinder pressure, heat release rate (HRR) and pressure (P) versus volume (V) diagrams

A universal Model-R Coupler to facilitate the use of R functions for model calibration and analysis

Science.gov (United States)

Wu, Yiping; Liu, Shuguang; Yan, Wende

2014-01-01

Mathematical models are useful in various fields of science and engineering. However, it is a challenge to make a model utilize the open and growing functions (e.g., model inversion) on the R platform due to the requirement of accessing and revising the model's source code. To overcome this barrier, we developed a universal tool that aims to convert a model developed in any computer language to an R function using the template and instruction concept of the Parameter ESTimation program (PEST) and the operational structure of the R-Soil and Water Assessment Tool (R-SWAT). The developed tool (Model-R Coupler) is promising because users of any model can connect an external algorithm (written in R) with their model to implement various model behavior analyses (e.g., parameter optimization, sensitivity and uncertainty analysis, performance evaluation, and visualization) without accessing or modifying the model's source code.

Recovery of Exhaust Waste Heat for ICE Using the Beta Type Stirling Engine

OpenAIRE

Aladayleh, Wail; Alahmer, Ali

2015-01-01

This paper investigates the potential of utilizing the exhaust waste heat using an integrated mechanical device with internal combustion engine for the automobiles to increase the fuel economy, the useful power, and the environment safety. One of the ways of utilizing waste heat is to use a Stirling engine. A Stirling engine requires only an external heat source as wasted heat for its operation. Because the exhaust gas temperature may reach 200 to 700°C, Stirling engine will work effectively....

Design, Engineering, and Characterization of Prokaryotic Ligand-Binding Transcriptional Activators as Biosensors in Yeast

DEFF Research Database (Denmark)

Ambri, Francesca; Snoek, Tim; Skjødt, Mette Louise

2018-01-01

process. In the yeast Saccharomyces cerevisiae, implementation of allosterically regulated transcription factors from prokaryotes as metabolite biosensors has proven a valuable strategy to alleviate this screening bottleneck. Here, we present a protocol to select and incorporate prokaryotic...... transcriptional activators as metabolite biosensors in S. cerevisiae. As an example, we outline the engineering and characterization of the LysR-type transcriptional regulator (LTTR) family member BenM from Acetinobacter sp. ADP1 for monitoring accumulation of cis,cis-muconic acid, a bioplast precursor, in yeast...

Double white dwarfs as progenitors of R coronae borealis stars and type I supernovae

International Nuclear Information System (INIS)

Webbink, R.F.

1984-01-01

Close double white dwarfs should arise from the second phase of mass exchagne in close binaries which first encountered mass exchange while the more massive star was crossing the Hertzprung gap. Tidal mass transfer in these double degenerate systems is explored. The sequence of double white dwarf divides naturally into three segments. (1) Low-mass helium/helium pairs are unstable to dynamical time-scale mass transfer and probably coalesce to form helium-burning sdO stars. (2) In helium/carbon-oxygen pairs, mass transfer occurs on the time scale for gravitational radiation losses (approx.10 -4 M/sub sun/ yr -1 ); the accreted helium is quickly ignited, and the accretor expands to dimensions characteristic of R CrB stars, engulfing its companion star. (3) Carbon-oxygen/carbon-oxygen pairs are again unstable to dynamical time-scale mass transfer and, since their total masses exceed the Chandrasekhar limit, are destined to become supernovae. Inactive lifetimes in these latter systems between creation and interaction can exceed 10 10 years. Birthrates of R CrB stars and Type I supernovae by evolution of double white dwarfs are in reasonable agreement with observational estimates

A Completely New Type of Actuator -or- This Ain't Your Grandfather's Internal Combustion Engine

Science.gov (United States)

Gore, Brian W.; Hawkins, Gary F.; Hess, Peter A.; Moore, Teresa A.; Fournier, Eric W.

2010-01-01

A completely new type of actuator - one that is proposed for use in a variety of environments from sea to land to air to space - has been designed, patented, built, and tested. The actuator is loosely based on the principle of the internal combustion engine, except that it is a completely closed system, only requiring electrical input, and the working fuel is water. This paper outlines the theory behind the electrolysis- and ignition-based cycle upon which the actuator operates and describes the performance capability test apparatus and results for the actuator. A mechanism application that harnessed the unit s power to twist a scaled rotor blade is also highlighted.

Inhibition of IL-1R1/MyD88 signalling promotes mesenchymal stem cell-driven tissue regeneration.

Science.gov (United States)

Martino, Mikaël M; Maruyama, Kenta; Kuhn, Gisela A; Satoh, Takashi; Takeuchi, Osamu; Müller, Ralph; Akira, Shizuo

2016-03-22

Tissue injury and the healing response lead to the release of endogenous danger signals including Toll-like receptor (TLR) and interleukin-1 receptor, type 1 (IL-1R1) ligands, which modulate the immune microenvironment. Because TLRs and IL-1R1 have been shown to influence the repair process of various tissues, we explored their role during bone regeneration, seeking to design regenerative strategies integrating a control of their signalling. Here we show that IL-1R1/MyD88 signalling negatively regulates bone regeneration, in the mouse. Furthermore, IL-1β which is released at the bone injury site, inhibits the regenerative capacities of mesenchymal stem cells (MSCs). Mechanistically, IL-1R1/MyD88 signalling impairs MSC proliferation, migration and differentiation by inhibiting the Akt/GSK-3β/β-catenin pathway. Lastly, as a proof of concept, we engineer a MSC delivery system integrating inhibitors of IL-1R1/MyD88 signalling. Using this strategy, we considerably improve MSC-based bone regeneration in the mouse, demonstrating that this approach may be useful in regenerative medicine applications.

TYPE Ia SNe ALONG REDSHIFT: THE R(Si II) RATIO AND THE EXPANSION VELOCITIES IN INTERMEDIATE-z SUPERNOVAE

International Nuclear Information System (INIS)

Altavilla, G.; Ruiz-Lapuente, P.; Balastegui, A.; Mendez, J.; Espana-Bonet, C.; Irwin, M.; Ellis, R. S.; McMahon, R. M.; Walton, N. A.; Folatelli, G.; Goobar, A.; Nobili, S.; Stanishev, V.; Hillebrandt, W.

2009-01-01

We present a study of intermediate-z Type Ia supernovae (SNe Ia) using empirical physical diagrams which permit the investigation of those SNe explosions. This information can be very useful to reduce systematic uncertainties of the Hubble diagram of SNe Ia up to high z. The study of the expansion velocities and the measurement of the ratio R(Si II) allow subtyping of SNe Ia as done in nearby samples. The evolution of this ratio as seen in the diagram R(Si II)-(t) together with R(Si II) max versus (B - V) 0 indicates consistency of the properties at intermediate-z compared with the nearby SNe Ia. At intermediate-z, expansion velocities of Ca II and Si II are found similar to those of the nearby sample. This is found in a sample of six SNe Ia in the range 0.033 ≤z≤ 0.329 discovered within the International Time Programme of SNe Ia for Cosmology and Physics in the spring run of 2002. 7 The program run under Omega and Lambda from Supernovae and the Physics of Supernova Explosions within the International Time Programme at the telescopes of the European Northern Observatory (ENO) at La Palma (Canary Islands, Spain). Two SNe Ia at intermediate-z were of the cool FAINT type, one being an SN1986G-like object highly reddened. The R(Si II) ratio as well as subclassification of the SNe Ia beyond templates help to place SNe Ia in their sequence of brightness and to distinguish between reddened and intrinsically red supernovae. This test can be done with very high z SNe Ia and it will help to reduce systematic uncertainties due to extinction by dust. It should allow to map the high-z sample into the nearby one.

FY2014 Advanced Combustion Engine Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None

2015-03-01

The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low emissions advanced internal combustion engines for passenger and commercial vehicles.

FY2016 Advanced Combustion Engine Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-07-01

The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low emissions advanced internal combustion engines for passenger and commercial vehicles.

FY2015 Advanced Combustion Engine Annual Progress Report

Energy Technology Data Exchange (ETDEWEB)

Singh, Gurpreet [Vehicle Technologies Office, Washington, DC (United States); Gravel, Roland M. [Vehicle Technologies Office, Washington, DC (United States); Howden, Kenneth C. [Vehicle Technologies Office, Washington, DC (United States); Breton, Leo [Vehicle Technologies Office, Washington, DC (United States)

2016-03-25

The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low emissions advanced internal combustion engines for passenger and commercial vehicles.

Effects of PM fouling on the heat exchange effectiveness of wave fin type EGR cooler for diesel engine use

Science.gov (United States)

Jang, Sang-Hoon; Hwang, Se-Joon; Park, Sang-Ki; Choi, Kap-Seung; Kim, Hyung-Man

2012-06-01

Developing an effective method of reducing nitrogen oxide emissions is an important goal in diesel engine research. The use of cooled exhaust gas recirculation has been considered one of the most effective techniques of reducing nitrogen oxide. However, since the combustion characteristics in a diesel engine involves high temperature and load, the amount of particulate matter emission tends to increase, and there is a trade-off between the amount of nitrogen oxide and particulate matter emissions. In the present study, engine dynamometer experiments are performed to investigate the effects of particulate matter fouling on the heat exchange characteristics of wave fin type exhaust gas recirculation coolers that have four cases of two wave pitch and three fin pitch lengths. To optimize the fin and wave pitches of the EGR cooler, the exhaust gas temperature, pressure drop and heat exchange effectiveness are compared. The experimental results show that the exhaust gas recirculation cooler with a fin pitch of 3.6 mm and a wave pitch of 8.8 mm exhibits better heat exchange characteristics and smaller particulate matter fouling effect than the other coolers.

An investigation into the RCCI engine operation under low load and its achievable operational range at different engine speeds

International Nuclear Information System (INIS)

Wang, Yifeng; Zhu, ZhongWen; Yao, Mingfa; Li, Tie; Zhang, Weijing; Zheng, Zunqing

2016-01-01

Highlights: • The response of allowable RCCI operating range to engine speed variation is studied. • The RCCI and diesel LTC engine operations at are compared at low engine load. • The potential of expanding RCCI operating range at low engine speed is explored. - Abstract: Reactivity controlled compression ignition (RCCI) is demonstrated as a promising combustion strategy to achieve high efficiency and clean combustion. However, less effort has been devoted to examine the achievable RCCI operational range over a wide range of engine speed. In addition, previous studies have found that superior EGR rate and high diesel/gasoline fuel ratio are required to ease the extension of the low-load operating range of RCCI regime. Even then, relatively high CO and HC (unburned hydrocarbon) emissions and the accompanying fuel con-sum ption penalty still remain a problem to be resolved. Therefore, in this work the potential of diesel-fueled LTC to achieve simultaneously low NOx and soot emissions while maintaining high thermal efficiency at low load (IMEP ≈0.23–0.26 MPa) is investigated and compared with the gasoline/diesel RCCI strategy. The results show that the diesel LTC operation can yield slightly higher soot and NOx emissions (soot: 0.002 g/kW h, NOx: 0.446 g/kW h), but CO and HC emissions as well as the fuel consumption are much lower than the RCCI strategy, implying the diesel LTC regime may be more suitable for low-load operations. In addition, the RCCI operational range at speeds ranging from 900 to 2500 r/min is determined, the results show that the maximum achievable load (IMEP) increases with an increase in speed, and a maximum IMEP of 1.2 MPa can be achieved at an engine speed of 2300 r/min. Ultra-low NOx and soot emissions (soot < 0.003 g/kW h, NOx < 0.4 g/kW h) can be achieved under the maximum loading conditions at each speed investigated. However, high levels of CO and HC emissions still remain a big problem to be solved. The lowest fuel consumption

R -Dimensional ESPRIT-Type Algorithms for Strictly Second-Order Non-Circular Sources and Their Performance Analysis

Science.gov (United States)

Steinwandt, Jens; Roemer, Florian; Haardt, Martin; Galdo, Giovanni Del

2014-09-01

High-resolution parameter estimation algorithms designed to exploit the prior knowledge about incident signals from strictly second-order (SO) non-circular (NC) sources allow for a lower estimation error and can resolve twice as many sources. In this paper, we derive the R-D NC Standard ESPRIT and the R-D NC Unitary ESPRIT algorithms that provide a significantly better performance compared to their original versions for arbitrary source signals. They are applicable to shift-invariant R-D antenna arrays and do not require a centrosymmetric array structure. Moreover, we present a first-order asymptotic performance analysis of the proposed algorithms, which is based on the error in the signal subspace estimate arising from the noise perturbation. The derived expressions for the resulting parameter estimation error are explicit in the noise realizations and asymptotic in the effective signal-to-noise ratio (SNR), i.e., the results become exact for either high SNRs or a large sample size. We also provide mean squared error (MSE) expressions, where only the assumptions of a zero mean and finite SO moments of the noise are required, but no assumptions about its statistics are necessary. As a main result, we analytically prove that the asymptotic performance of both R-D NC ESPRIT-type algorithms is identical in the high effective SNR regime. Finally, a case study shows that no improvement from strictly non-circular sources can be achieved in the special case of a single source.

Development of Servo Motor Trainer for Basic Control System in Laboratory of Electrical Engineering Control System Faculty of Engineering Universitas Negeri Surabaya

Science.gov (United States)

Endryansyah; Wanarti Rusimamto, Puput; Ridianto, Adam; Sugiarto, Hariyadi

2018-04-01

In the Department of Electrical Engineering FT Unesa, there are 3 majors: S1 Electrical Engineering Education, S1 Electrical Engineering, and D3 Electrical Engineering. Courses the Basic System Settings go to in the curriculum of the three programs. Team lecturer college of basic system settings seek learning innovation, focused on the development of trainer to student practicum at the laboratory of systems control. Trainer developed is a servo motor along with the lab module that contains a wide variety of theories about the servo motor and guide the practicum. This research type is development research using methods Research & development (R & D). In which the steps are applied in this study is as follows: pay attention to the potential and existing problems, gather information and study the literature, design the product, validate the design, revise the design, a limited trial. The results of the validation of learning device in the form of modules and trainer obtained as follows: score validation of learning device is 3,64; score validation lab module Servo Motor is 3,47; and questionnaire responses of students is 3,73. The result of the whole validation value is located in the interval >of 3.25 s/d 4 with the category of “Very Valid”, so it can be concluded that all instruments have a level of validity “Very Valid” and worthy of use for further learning.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 12: The diffusion of federally funded aerospace Research and Development (R&D) and the information seeking behavior of US aerospace engineers and scientists

Science.gov (United States)

Pinelli, Thomas E.; Kennedy, John M.; Barclay, Rebecca O.

1991-01-01

The present exploration of the diffusion of federally-funded R&D via the information-seeking behavior of scientists and engineers proceeds under three assumptions: (1) that knowledge transfer and utilization is as important as knowledge production; (2) that the diffusion of knowledge obtained through federally-funded R&D is necessary for the maintenance of U.S. preeminence in the aerospace field; and (3) that federally-funded NASA and DoD technical reports play an important, albeit as-yet undefined, role in aerospace R&D diffusion. A conceptual model is presented for the process of knowledge diffusion that stresses the role of U.S. government-funded technical reports.

Practical experience with measurement of diesel engine smoke pursuant to ECE-R 24

Energy Technology Data Exchange (ETDEWEB)

Dittrich, W

1975-01-01

Since the ECE regulation 24 demands that diesel smoke of automobiles be measured with opacimeters or units yielding equivalent results, the smoke density of diesel engines was measured with opacimeters and filter units for comparison. Conversion tables, comparative curves, and calculations are provided permitting the conversion of grey tones into opacity units with an accuracy sufficient for practical use. The correlation of measurements obtained with the filters and opacimeters was studied during operation at constant full load and at free acceleration. A relationship could be found in most cases; however, it provided no basis for setting up correlations. Finally, smoke characteristics of induction diesel engines were compared with supercharged engines at different geographical altitudes, based upon practical road tests in the Grossglockner mountains. A linear smoke increase with increasing altitude or decreasing air density was observed.

75 FR 48411 - Research, Engineering and Development Advisory Committee; Notice of Meeting

Science.gov (United States)

2010-08-10

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development.... 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development (R, E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: September...

Programming of adipose tissue miR-483-3p and GDF-3 expression by maternal diet in type 2 diabetes

DEFF Research Database (Denmark)

Ferland-McCollough, D; Fernandez-Twinn, D S; Cannell, I G

2012-01-01

substantially modulates the capacity of adipocytes to differentiate and store lipids. We show that some of these effects are mediated by translational repression of growth/differentiation factor-3, a target of miR-483-3p. We propose that increased miR-483-3p expression in vivo, programmed by early......Nutrition during early mammalian development permanently influences health of the adult, including increasing the risk of type 2 diabetes and coronary heart disease. However, the molecular mechanisms underlying such programming are poorly defined. Here we demonstrate that programmed changes in mi......RNA expression link early-life nutrition to long-term health. Specifically, we show that miR-483-3p is upregulated in adipose tissue from low-birth-weight adult humans and prediabetic adult rats exposed to suboptimal nutrition in early life. We demonstrate that manipulation of miR-483-3p levels in vitro...

Potentiel des moteurs à mélange pauvre face aux moteurs actuels à réglage stoechiométrique : consommation, émissions, exigence en octane The Challenge to Modern Stoichiometric Engines by the Potential Lean-Burn Engine: Consumption, Emissions, Fuel Requirements

Directory of Open Access Journals (Sweden)

Douaud A. M.

2006-11-01

Full Text Available Le moteur à allumage commandé pour application automobile aux États-Unis est généralement dépollué par catalyse trifonctionnelle qui impose un contrôle stoechiométrique du mélange air-carburant. Le contexte européen de 1990 pour la qualité de l'air stimule l'industrie automobile dans ses recherches de solutions techniques performantes. Le moteur à mélange pauvre, performant en consommation, est une solution potentielle si l'émission de NOx peut être maîtrisée par la combustion. Cet objectif nécessite une conception du moteur contrôlant la turbulence et l'hétérogénéité du mélange air + carburant + résiduels pendant la combustion. La longévité de l'adaptation optimale moteur-carburant nécessitera un contrôle électronique de l'allumage et l'utilisation d'additifs détergents. Pour satisfaire les réglementations les plus sévères, les émissions de CO et HC pourront être contrôlées par un simple pot catalytique d'oxydation. Des oxydes de métaux non précieux introduits dans la formule catalytique en addition aux métaux précieux maintiennent la fonction oxydante pendant les transitoires en mélange riche tout en réduisant partiellement les NOx. Une vue d'ensemble de ce concept basé sur des simulations numériques et des résultats expérimentaux de consommation, d'émission, d'exigence en octane, etc. est présentée. Spark-ignition engines for automotive applications in the United States are currently depolluted by a 3-way catalyst that requires air-fuel control at stoichiometry. The 1990 European context for air pollution control is stimulating the automotive industry to search for improved technical solutions. The lean-burn engine is a potential fuel-efficient answer if its combustion can be optimized for low NOx emissions. Achieving this challenging approach requires engine design to control the turbulence and heterogeneity of the air + fuel + residual mixture during combustion. Electronic ignition

FY2009 Annual Progress Report for Advanced Combustion Engine Research and Development

Energy Technology Data Exchange (ETDEWEB)

none,

2009-12-01

Fiscal Year 2009 Annual Progress Report for the Advanced Combustion Engine Research and Development (R&D) subprogram. The Advanced Combustion Engine R&D subprogram supports the mission of the VTP program by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that meet future Federal emissions regulations. Dramatically improving the efficiency of ICEs and enabling their introduction in conventional as well as hybrid electric vehicles is the most promising and cost-effective approach to increasing vehicle fuel economy over the next 30 years.

Quantum heat engine operating between thermal and spin reservoirs

Science.gov (United States)

Wright, Jackson S. S. T.; Gould, Tim; Carvalho, André R. R.; Bedkihal, Salil; Vaccaro, Joan A.

2018-05-01

Landauer's erasure principle is a cornerstone of thermodynamics and information theory [R. Landauer, IBM J. Res. Dev. 5, 183 (1961), 10.1147/rd.53.0183]. According to this principle, erasing information incurs a minimum energy cost. Recently, Vaccaro and Barnett [J. A. Vaccaro and S. M. Barnett, Proc. R. Soc. A 467, 1770 (2011), 10.1098/rspa.2010.0577] explored information erasure in the context of multiple conserved quantities and showed that the erasure cost can be solely in terms of spin angular momentum. As Landauer's erasure principle plays a fundamental role in heat engines, their result considerably widens the possible configurations that heat engines can have. Motivated by this, we propose here an optical heat engine that operates under a single thermal reservoir and a spin angular momentum reservoir coupled to a three-level system with two energy degenerate ground states. The proposed heat engine operates without producing waste heat and goes beyond the traditional Carnot engine where the working fluid is subjected to two thermal baths at different temperatures.

The interaction between internal R&D and different types of external knowledge sourcing: an empirical study of Chinese innovative firms

NARCIS (Netherlands)

Chen, Y.; Vanhaverbeke, W.; Du, J.

2016-01-01

This paper investigates to what extent internal R&D efforts and different types of external knowledge sources jointly affect innovation performance of firms in emerging economies. Based on a survey about external knowledge sourcing activities of Chinese innovative firms, we categorize external

VizieR

Science.gov (United States)

together. Simple examples Textual search UCD tree Choose catalogs containing a type of column by clicking astronomy) CDS cross-match service : fast cross-identification between any 2 tables, including VizieR

Measurement of behavior of secondary sealing areas of rotary engine apex seals - Two-piece nonsplit and three-piece slanted horizontal split types

Science.gov (United States)

Matsuura, Kenji; Terasaki, Kazuo; Yamane, Katsuki

1992-12-01

Behavior measurements have been made with two displacement sensors and an underseal pressure sensor, using an overhanging eccentric shaft-type single-rotor research engine equipped with a packaged multichannel slip ring. The two-piece seal was tilted to the leading and trailing sides of a seal slot during its travel along the rotor housing surface and vibrated on the top end of the leading side of the slot as a fulcrum after the shift from the trailing to the leading side of the slot after the minor axis on the spark plug side. As for the three-piece seal, its top part was also tilted in all operating conditions, although its bottom part made effective area contact with the side of the slot under light load conditions up to medium engine speeds. The working chamber pressure was induced in the underseal in the same manner as with the two-piece type.

A Review of Heavy-Fueled Rotary Engine Combustion Technologies

Science.gov (United States)

2011-05-01

Triangle Park, NC, 2009. 17. Shimizu, R.; Tadokoro, T.; Nakanishi, T.; Funamoto, J. Mazda 4-Rotor Rotary Engine for the Le Mans 24-Hour Endurance...2000. 102. Schock, H.; Hamady, F.; Somerton , C. Stratified Charge Rotary Engine Combustion Studies; NASA-CR-197985; National Aeronautics and

Adaptive Engineering of an Embedded System, Engineered for use by Search and Rescue Canines

Directory of Open Access Journals (Sweden)

Cristina Ribeiro

2011-06-01

Full Text Available In Urban Search and Rescue (US&R operations, canine teams are deployed to find live patients, and save lives. US&R may benefit from increased levels of situational awareness, through information made available through the use of embedded systems attached to the dogs. One of these is the Canine Pose Estimation (CPE system. There are many challenges faced with such embedded systems including the engineering of such devices for use in disaster environments. Durability and wireless connectivity in areas with materials that inhibit wireless communications, the safety of the dog wearing the devices, and form factor must be accommodated. All of these factors must be weighed without compromising the accuracy of the application and the timely delivery of its data. This paper discusses the adaptive engineering process and how each of the unique challenges of emergency response embedded systems can be defined and overcome through effective design methods.

Military Tactical Aircraft Engine Noise Matching to Infrared Signatures

Science.gov (United States)

2016-12-16

Jet engine exhaust plumes also exhibit emission and absorption of radiation from their emitted chemical species, occurring at discrete spectra...Modulation,” Naval Postgraduate School MS thesis (1990). [8] Sinha, N., Ungewitter, R. J., Kenzakowski, D. C., and Seiner, J. M., “Gas Turbine Engine Jet...FINAL REPORT Military Tactical Aircraft Engine Noise Matching to Infrared Signatures SERDP Project WP-2404 JANUARY 2016 Dr

Biomedical engineering for health research and development.

Science.gov (United States)

Zhang, X-Y

2015-01-01

Biomedical engineering is a new area of research in medicine and biology, providing new concepts and designs for the diagnosis, treatment and prevention of various diseases. There are several types of biomedical engineering, such as tissue, genetic, neural and stem cells, as well as chemical and clinical engineering for health care. Many electronic and magnetic methods and equipments are used for the biomedical engineering such as Computed Tomography (CT) scans, Magnetic Resonance Imaging (MRI) scans, Electroencephalography (EEG), Ultrasound and regenerative medicine and stem cell cultures, preparations of artificial cells and organs, such as pancreas, urinary bladders, liver cells, and fibroblasts cells of foreskin and others. The principle of tissue engineering is described with various types of cells used for tissue engineering purposes. The use of several medical devices and bionics are mentioned with scaffold, cells and tissue cultures and various materials are used for biomedical engineering. The use of biomedical engineering methods is very important for the human health, and research and development of diseases. The bioreactors and preparations of artificial cells or tissues and organs are described here.

China general nuclear power corporation--The recent research and application of the modular technology in nuclear power engineering

International Nuclear Information System (INIS)

Lu Qinwu

2014-01-01

Modular design and construction is one of the distinctive features of the 3"r"d generation nuclear power technology. In order to promote the technological innovations in nuclear power engineering design and construction and develop the self-owned modular technology, China General Nuclear Power Corporation (CGN) has carried out the R and D and application of the modular technology based on the CPR1000-type nuclear power plants, and has made the national-level achievements in the establishment of modular design technology system, development of 3D modular design system and application of modular construction of containment steel liner in the demonstration projects. (author)

General algebraic method applied to control analysis of complex engine types

Science.gov (United States)

Boksenbom, Aaron S; Hood, Richard

1950-01-01

A general algebraic method of attack on the problem of controlling gas-turbine engines having any number of independent variables was utilized employing operational functions to describe the assumed linear characteristics for the engine, the control, and the other units in the system. Matrices were used to describe the various units of the system, to form a combined system showing all effects, and to form a single condensed matrix showing the principal effects. This method directly led to the conditions on the control system for noninteraction so that any setting disturbance would affect only its corresponding controlled variable. The response-action characteristics were expressed in terms of the control system and the engine characteristics. The ideal control-system characteristics were explicitly determined in terms of any desired response action.

HCCI Engine Optimization and Control

Energy Technology Data Exchange (ETDEWEB)

Rolf D. Reitz

2005-09-30

The goal of this project was to develop methods to optimize and control Homogeneous-Charge Compression Ignition (HCCI) engines, with emphasis on diesel-fueled engines. HCCI offers the potential of nearly eliminating IC engine NOx and particulate emissions at reduced cost over Compression Ignition Direct Injection engines (CIDI) by controlling pollutant emissions in-cylinder. The project was initiated in January, 2002, and the present report is the final report for work conducted on the project through December 31, 2004. Periodic progress has also been reported at bi-annual working group meetings held at USCAR, Detroit, MI, and at the Sandia National Laboratories. Copies of these presentation materials are available on CD-ROM, as distributed by the Sandia National Labs. In addition, progress has been documented in DOE Advanced Combustion Engine R&D Annual Progress Reports for FY 2002, 2003 and 2004. These reports are included as the Appendices in this Final report.

46 CFR 58.10-5 - Gasoline engine installations.

Science.gov (United States)

2010-10-01

... MACHINERY AND RELATED SYSTEMS Internal Combustion Engine Installations § 58.10-5 Gasoline engine installations. (a) Engine design. All installations shall be of marine type engines suitable for the intended... of such protection. (d) Exhaust pipe. (1) Exhaust pipe installations must conform to the requirements...

28 September 2011 - Canadian Intellectual Property Office Policy, International and Research Office Director K. Georgaras visiting the LHC superconducting magnet test hall with Engineer M. Bajko and Senior Scientists P. Jenni and R. Voss.

CERN Multimedia

2011-01-01

28 September 2011 - Canadian Intellectual Property Office Policy, International and Research Office Director K. Georgaras visiting the LHC superconducting magnet test hall with Engineer M. Bajko and Senior Scientists P. Jenni and R. Voss.

Windmilling of turbofan engine; calculation of performance characteristics of a turbofan engine under windmilling

OpenAIRE

Ramanathan, A.

2014-01-01

The turbofan is a type of air breathing jet engine that finds wide use in aircraft propulsion. During the normal operation of a turbofan engine installed in aircraft, the combustor is supplied with fuel, flow to the combustor is cut off and the engine runs under so called Windmilling conditions being driven only by the ram pressure ratio by producing drag. In-depth analysis is done to study the performance characteristics at this state.

New Japanese AVLIS R and D program

International Nuclear Information System (INIS)

Sato, Y.

1995-01-01

In LASER-J, the second phase of AVLIS R and D program has started since April 1993. At the first phase, we developed AVLIS plant components such as CVL, DL, and electron beam guns for a facility having about a one-ton SWU per year capacity and obtained engineering data related to this facility. During the second phase, the next five years or so, we will develop full scale AVLIS hardware. In this session, the R and D results of the first phase and the outline of the R and D program for the second phase will be presented. (author)

Effects of R&D Cooperation to Innovation Performance in Open Innovation Environment

Directory of Open Access Journals (Sweden)

Gao Liang

2014-05-01

Full Text Available Dynamic nonlinear characteristics of internal and external environment in modern organization shows up increasingly, which make innovative research breakthrough organizational boundaries and present a pattern of open mode, the traditional mode of innovation is facing huge challenges like increasing innovation cycle, huge R&D input and inefficient knowledge transfer. And cooperation with external organizations to implement R&D is definitely a possibility to solve the open innovation environment challenge. Since organizations often have multiple dimensions of cooperation with different types of organization for research and development for the influence of organizational innovation performance or for exploring cooperation at the same time in different areas, and in different types of institutions. This paper studied the innovation performance of relevant government agencies except such innovation organization as enterprises, universities, and research institutions for the first time. This paper tracked on a survey of China's national engineering technology research center in related situation from 2002 to 2011 and collected related data to research and development cooperation and innovation performance for empirical research. Study found that universities have advantages in richness, in knowledge itself and knowledge accessible extent, cooperation with university in R&D is the best choice to promote the innovation performance of the organization. While cooperating with domestic universities and domestic enterprises to carry out research and development has bad effect in organizational innovation performance; while cooperation with domestic institutions and foreign institutions in the research and development plays a positive role in promoting innovation.

Cycle Engine Modelling Of Spark Ignition Engine Processes during Wide-Open Throttle (WOT) Engine Operation Running By Gasoline Fuel

International Nuclear Information System (INIS)

Rahim, M F Abdul; Rahman, M M; Bakar, R A

2012-01-01

One-dimensional engine model is developed to simulate spark ignition engine processes in a 4-stroke, 4 cylinders gasoline engine. Physically, the baseline engine is inline cylinder engine with 3-valves per cylinder. Currently, the engine's mixture is formed by external mixture formation using piston-type carburettor. The model of the engine is based on one-dimensional equation of the gas exchange process, isentropic compression and expansion, progressive engine combustion process, and accounting for the heat transfer and frictional losses as well as the effect of valves overlapping. The model is tested for 2000, 3000 and 4000 rpm of engine speed and validated using experimental engine data. Results showed that the engine is able to simulate engine's combustion process and produce reasonable prediction. However, by comparing with experimental data, major discrepancy is noticeable especially on the 2000 and 4000 rpm prediction. At low and high engine speed, simulated cylinder pressures tend to under predict the measured data. Whereas the cylinder temperatures always tend to over predict the measured data at all engine speed. The most accurate prediction is obtained at medium engine speed of 3000 rpm. Appropriate wall heat transfer setup is vital for more precise calculation of cylinder pressure and temperature. More heat loss to the wall can lower cylinder temperature. On the hand, more heat converted to the useful work mean an increase in cylinder pressure. Thus, instead of wall heat transfer setup, the Wiebe combustion parameters are needed to be carefully evaluated for better results.

Proceedings of the second conference on medical physics and biomedical engineering of R. Macedonia

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

In the 21st century many branches in medicine can not exist without physicists. Most recent methods in medicine, especially new technologies in cancer diagnostic and treatments, have resulted in a great need for medical physicists in growing number of institutions and hospitals. I There are a certain number of highly qualified and dedicated professionals in medical physics in Macedonia whose work is mainly performed in governmental institutions committed towards medical physics issues. The Association for Medical Physics and Biomedical Engineering (AMPBE) was established in 2000 as the first professional association in Macedonia competent to cope with problems in the fields of medicine, applying methods of physics and biomedical engineering to medical procedures in order to develop tools essential to the physicians that will improve medical care in general. Three years ago the First National Conference on Medical Physics and Biomedical Engineering was organized by the Association. The idea was to gather all the professionals working in medical physics and biomedical engineering on one place in order to present their work and increase the collaboration among them. Other involved professions such as medical doctors, radiation technologists, engineers and physics professors from the University also took part and contributed to the success of the conference. As a result the Proceedings were published in Macedonian, with summaries in English.

Proceedings of the second conference on medical physics and biomedical engineering of R. Macedonia

International Nuclear Information System (INIS)

2010-01-01

In the 21st century many branches in medicine can not exist without physicists. Most recent methods in medicine, especially new technologies in cancer diagnostic and treatments, have resulted in a great need for medical physicists in growing number of institutions and hospitals. I There are a certain number of highly qualified and dedicated professionals in medical physics in Macedonia whose work is mainly performed in governmental institutions committed towards medical physics issues. The Association for Medical Physics and Biomedical Engineering (AMPBE) was established in 2000 as the first professional association in Macedonia competent to cope with problems in the fields of medicine, applying methods of physics and biomedical engineering to medical procedures in order to develop tools essential to the physicians that will improve medical care in general. Three years ago the First National Conference on Medical Physics and Biomedical Engineering was organized by the Association. The idea was to gather all the professionals working in medical physics and biomedical engineering on one place in order to present their work and increase the collaboration among them. Other involved professions such as medical doctors, radiation technologists, engineers and physics professors from the University also took part and contributed to the success of the conference. As a result the Proceedings were published in Macedonian, with summaries in English.

Effect of tcdR Mutation on Sporulation in the Epidemic Clostridium difficile Strain R20291.

Science.gov (United States)

Girinathan, Brintha P; Monot, Marc; Boyle, Daniel; McAllister, Kathleen N; Sorg, Joseph A; Dupuy, Bruno; Govind, Revathi

2017-01-01

Clostridium difficile is an important nosocomial pathogen and the leading cause of hospital-acquired diarrhea. Antibiotic use is the primary risk factor for the development of C. difficile -associated disease because it disrupts normally protective gut flora and enables C. difficile to colonize the colon. C. difficile damages host tissue by secreting toxins and disseminates by forming spores. The toxin-encoding genes, tcdA and tcdB , are part of a pathogenicity locus, which also includes the tcdR gene that codes for TcdR, an alternate sigma factor that initiates transcription of tcdA and tcdB genes. We created a tcdR mutant in epidemic-type C. difficile strain R20291 in an attempt to identify the global role of tcdR . A site-directed mutation in tcdR affected both toxin production and sporulation in C. difficile R20291. Spores of the tcdR mutant were more heat sensitive than the wild type (WT). Nearly 3-fold more taurocholate was needed to germinate spores from the tcdR mutant than to germinate the spores prepared from the WT strain. Transmission electron microscopic analysis of the spores also revealed a weakly assembled exosporium on the tcdR mutant spores. Accordingly, comparative transcriptome analysis showed many differentially expressed sporulation genes in the tcdR mutant compared to the WT strain. These data suggest that regulatory networks of toxin production and sporulation in C. difficile strain R20291 a re linked with each other. IMPORTANCE C. difficile infects thousands of hospitalized patients every year, causing significant morbidity and mortality. C. difficile spores play a pivotal role in the transmission of the pathogen in the hospital environment. During infection, the spores germinate, and the vegetative bacterial cells produce toxins that damage host tissue. Thus, sporulation and toxin production are two important traits of C. difficile . In this study, we showed that a mutation in tcdR , the toxin gene regulator, affects both toxin

Internal Combustion Engine Principles with Vehicle Applications

DEFF Research Database (Denmark)

Sorenson, Spencer C

The book is an introductory text on the subject of internal combustion engines, intended for use in engineering courses at the senior or introductory graduate student level. The focus in on describing the basic principles of engine operation on a broad basis, to provide a foundation for further...... exchange processes, combustion in different engine types, exhaust emissions, engine control including mean value engine models, pressure charging, fuels and fuel systems, balancing, friction, and heat transfer. In addition, methods to establish the connection between engine characteristics and vehicle...

Magnetic and noncentrosymmetric Weyl fermion semimetals in the R AlGe family of compounds (R =rare earth )

Science.gov (United States)

Chang, Guoqing; Singh, Bahadur; Xu, Su-Yang; Bian, Guang; Huang, Shin-Ming; Hsu, Chuang-Han; Belopolski, Ilya; Alidoust, Nasser; Sanchez, Daniel S.; Zheng, Hao; Lu, Hong; Zhang, Xiao; Bian, Yi; Chang, Tay-Rong; Jeng, Horng-Tay; Bansil, Arun; Hsu, Han; Jia, Shuang; Neupert, Titus; Lin, Hsin; Hasan, M. Zahid

2018-01-01

Weyl semimetals are novel topological conductors that host Weyl fermions as emergent quasiparticles. In this Rapid Communication, we propose a new type of Weyl semimetal state that breaks both time-reversal symmetry and inversion symmetry in the R AlGe (R =rare -earth ) family. Compared to previous predictions of magnetic Weyl semimetal candidates, the prediction of Weyl nodes in R AlGe is more robust and less dependent on the details of the magnetism because the Weyl nodes are generated already by the inversion breaking and the ferromagnetism acts as a simple Zeeman coupling that shifts the Weyl nodes in k space. Moreover, R AlGe offers remarkable tunability, which covers all varieties of Weyl semimetals including type I, type II, inversion breaking, and time-reversal breaking, depending on a suitable choice of the rare-earth elements. Furthermore, the unique noncentrosymmetric and ferromagnetic Weyl semimetal state in R AlGe enables the generation of spin currents.

Du type au stéréotype : analyse des modalités d’insertion des stéréotypes des physiologies dans Bouvard et Pécuchet

Directory of Open Access Journals (Sweden)

Vincent Stohler

2011-01-01

Full Text Available Cette analyse a pour but d’exposer la manière dont Flaubert récupère les stéréotypes présents dans les physiologies, genre littéraire à la mode dans la première moitié du XIXe siècle, en définissant leurs différentes modalités d’insertion dans Bouvard et Pécuchet. Après s’être interrogée sur le statut particulier des physiologies, l’étude montre que les différents types qu’elles mettent en scène, et plus particulièrement celui du « bourgeois », fournissent à Flaubert un matériel discursif stéréotypé qui lui sert de base de composition à l’ensemble de son texte : composition des personnages (traits physiques, caractériels, axiologiques, etc., composition structurelle du roman, etc. La démonstration attire ainsi l’attention sur ce qui paraît être l’une des lignes de force de l’écriture flaubertienne : l’amenuisement au sein de l’espace romanesque du langage de l’auteur au profit d’un langage stéréotypé, venu d’ailleurs.

Equilibrium constant and nitrogen activity and the parameters of interaction eN(N), rN(N,Cr), rN(N,Mn) in high nitrogen steels of Fe-Cr-Mn-N type

International Nuclear Information System (INIS)

Svyazhin, A.G.; Siwka, J.; Rashev, T.

1999-01-01

In the paper a description of a thermodynamic of liquid solutions of Fe-Cr-Mn-N type with using a concept of parameters of an interaction has been presented. A temperature relationship of the equilibrium constant K N(Fe) and values of self interaction parameters e N (N) , r N (N,Cr) , r N (N,Mn) and t N (N,Cr,Cr) has been determined for mean values of temperatures of liquid metal equal 1990 K and 2090 K. By application of a theory of regular solutions those values were recalculated for a temperature 1873 K. (orig.)

Heat Pipes Reduce Engine-Exhaust Emissions

Science.gov (United States)

Schultz, D. F.

1986-01-01

Increased fuel vaporization raises engine efficiency. Heat-pipe technology increased efficiency of heat transfer beyond that obtained by metallic conduction. Resulted in both improved engine operation and reduction in fuel consumption. Raw material conservation through reduced dependence on strategic materials also benefit from this type of heat-pipe technology. Applications result in improved engine performance and cleaner environment.

THE FIRST SYSTEMATIC STUDY OF TYPE Ibc SUPERNOVA MULTI-BAND LIGHT CURVES

International Nuclear Information System (INIS)

Drout, Maria R.; Soderberg, Alicia M.; Gal-Yam, Avishay; Arcavi, Iair; Green, Yoav; Cenko, S. Bradley; Fox, Derek B.; Leonard, Douglas C.; Sand, David J.; Moon, Dae-Sik

2011-01-01

We present detailed optical photometry for 25 Type Ibc supernovae (SNe Ibc) within d ≈ 150 Mpc obtained with the robotic Palomar 60 inch telescope in 2004-2007. This study represents the first uniform, systematic, and statistical sample of multi-band SNe Ibc light curves available to date. We correct the light curves for host galaxy extinction using a new technique based on the photometric color evolution, namely, we show that the (V – R) color of extinction-corrected SNe Ibc at Δt ≈ 10 days after V-band maximum is tightly distributed, ((V – R) V10 ) = 0.26 ± 0.06 mag. Using this technique, we find that SNe Ibc typically suffer from significant host galaxy extinction, (E(B – V)) ≈ 0.4 mag. A comparison of the extinction-corrected light curves for helium-rich (Type Ib) and helium-poor (Type Ic) SNe reveals that they are statistically indistinguishable, both in luminosity and decline rate. We report peak absolute magnitudes of (M R ) = –17.9 ± 0.9 mag and (M R ) = –18.3 ± 0.6 mag for SNe Ib and Ic, respectively. Focusing on the broad-lined (BL) SNe Ic, we find that they are more luminous than the normal SNe Ibc sample, (M R ) = –19.0 ± 1.1 mag, with a probability of only 1.6% that they are drawn from the same population of explosions. By comparing the peak absolute magnitudes of SNe Ic-BL with those inferred for local engine-driven explosions (GRB-SN 1998bw, XRF-SN 2006aj, and SN 2009bb) we find a 25% probability that relativistic SNe are drawn from the overall SNe Ic-BL population. Finally, we fit analytic models to the light curves to derive typical 56 Ni masses of M Ni ≈ 0.2 and 0.5 M ☉ for SNe Ibc and SNe Ic-BL, respectively. With reasonable assumptions for the photospheric velocities, we further extract kinetic energy and ejecta mass values of M ej ≈ 2 M ☉ and E K ≈ 10 51 erg for SNe Ibc, while for SNe Ic-BL we find higher values, M ej ≈ 5 M ☉ and E K ≈ 10 52 erg. We discuss the implications for the progenitors of SNe Ibc

Organizational Influences on Interdisciplinary Interactions during Research and Design of Large-Scale Complex Engineered Systems

Science.gov (United States)

McGowan, Anna-Maria R.; Seifert, Colleen M.; Papalambros, Panos Y.

2012-01-01

The design of large-scale complex engineered systems (LaCES) such as an aircraft is inherently interdisciplinary. Multiple engineering disciplines, drawing from a team of hundreds to thousands of engineers and scientists, are woven together throughout the research, development, and systems engineering processes to realize one system. Though research and development (R&D) is typically focused in single disciplines, the interdependencies involved in LaCES require interdisciplinary R&D efforts. This study investigates the interdisciplinary interactions that take place during the R&D and early conceptual design phases in the design of LaCES. Our theoretical framework is informed by both engineering practices and social science research on complex organizations. This paper provides preliminary perspective on some of the organizational influences on interdisciplinary interactions based on organization theory (specifically sensemaking), data from a survey of LaCES experts, and the authors experience in the research and design. The analysis reveals couplings between the engineered system and the organization that creates it. Survey respondents noted the importance of interdisciplinary interactions and their significant benefit to the engineered system, such as innovation and problem mitigation. Substantial obstacles to interdisciplinarity are uncovered beyond engineering that include communication and organizational challenges. Addressing these challenges may ultimately foster greater efficiencies in the design and development of LaCES and improved system performance by assisting with the collective integration of interdependent knowledge bases early in the R&D effort. This research suggests that organizational and human dynamics heavily influence and even constrain the engineering effort for large-scale complex systems.

Type II collagen-hyaluronan hydrogel – a step towards a scaffold for intervertebral disc tissue engineering

Directory of Open Access Journals (Sweden)

L Calderon

2010-09-01

Full Text Available Intervertebral disc regeneration strategies based on stem cell differentiation in combination with the design of functional scaffolds is an attractive approach towards repairing/regenerating the nucleus pulposus. The specific aim of this study was to optimise a composite hydrogel composed of type II collagen and hyaluronic acid (HA as a carrier for mesenchymal stem cells. Hydrogel stabilisation was achieved by means of 1-ethyl-3(3-dimethyl aminopropyl carbodiimide (EDC and N-hydroxysuccinimide (NHS cross-linking. Optimal hydrogel properties were determined by investigating different concentrations of EDC (8mM, 24mM and 48mM. Stable hydrogels were obtained independent of the concentration of carbodiimide used. The hydrogels cross-linked by the lowest concentration of EDC (8mM demonstrated high swelling properties. Additionally, improved proliferation of seeded rat mesenchymal stem cells (rMSCs and hydrogel stability levels in culture were observed with this 8mM cross-linked hydrogel. Results from this study indicate that EDC/NHS (8mM cross-linked type II collagen/HA hydrogel was capable of supporting viability of rMSCs, and furthermore their differentiation into a chondrogenic lineage. Further investigations should be conducted to determine its potential as scaffold for nucleus pulposus regeneration/repair.

The Historical Basis of Engineering Ethics

Science.gov (United States)

Furuya, Keiichi

There are different objects and motives between scientists and engineers. Science is to create new knowledge (episteme), while technology (techne) is to create new utility. Both types of social responsibility are required for engineer, because modern technology is tightly connected with science. The relationship between ethics for scientists and engineers is discussed as an evolution of ethical objects. A short history of engineering societies in U.S.A. and Japan are introduced with their ethical perspectives. As a conclusion, respect for fundamental rights for existence of those who stand in, with, and around engineers and their societies is needed for better engineering ethics.

Effects of Engineered Nanomaterials on Plants Growth: An Overview

Science.gov (United States)

Bagheri, Samira; Muhd Julkapli, Nurhidayatullaili; Juraimi, Abdul Shukor; Hashemi, Farahnaz Sadat Golestan

2014-01-01

Rapid development and wide applications of nanotechnology brought about a significant increment on the number of engineered nanomaterials (ENs) inevitably entering our living system. Plants comprise of a very important living component of the terrestrial ecosystem. Studies on the influence of engineered nanomaterials (carbon and metal/metal oxides based) on plant growth indicated that in the excess content, engineered nanomaterials influences seed germination. It assessed the shoot-to-root ratio and the growth of the seedlings. From the toxicological studies to date, certain types of engineered nanomaterials can be toxic once they are not bound to a substrate or if they are freely circulating in living systems. It is assumed that the different types of engineered nanomaterials affect the different routes, behavior, and the capability of the plants. Furthermore, different, or even opposing conclusions, have been drawn from most studies on the interactions between engineered nanomaterials with plants. Therefore, this paper comprehensively reviews the studies on the different types of engineered nanomaterials and their interactions with different plant species, including the phytotoxicity, uptakes, and translocation of engineered nanomaterials by the plant at the whole plant and cellular level. PMID:25202734

Cell-type-specific genome editing with a microRNA-responsive CRISPR–Cas9 switch

Science.gov (United States)

Hirosawa, Moe; Fujita, Yoshihiko; Parr, Callum J. C.; Hayashi, Karin; Kashida, Shunnichi; Hotta, Akitsu; Woltjen, Knut

2017-01-01

Abstract The CRISPR–Cas9 system is a powerful genome-editing tool useful in a variety of biotechnology and biomedical applications. Here we developed a synthetic RNA-based, microRNA (miRNA)-responsive CRISPR–Cas9 system (miR-Cas9 switch) in which the genome editing activity of Cas9 can be modulated through endogenous miRNA signatures in mammalian cells. We created miR-Cas9 switches by using a miRNA-complementary sequence in the 5΄-UTR of mRNA encoding Streptococcus pyogenes Cas9. The miR-21-Cas9 or miR-302-Cas9 switches selectively and efficiently responded to miR-21-5p in HeLa cells or miR-302a-5p in human induced pluripotent stem cells, and post-transcriptionally attenuated the Cas9 activity only in the target cells. Moreover, the miR-Cas9 switches could differentially control the genome editing by sensing endogenous miRNA activities within a heterogeneous cell population. Our miR-Cas9 switch system provides a promising framework for cell-type selective genome editing and cell engineering based on intracellular miRNA information. PMID:28525578

The Central Engines of Short-Duration Gamma-Ray Bursts

Science.gov (United States)

Metzger, Brian; Arcones, A.; Quataert, E.; Martinez-Pinedo, G.

2010-01-01

One of the most important discoveries made with Swift is that long and short-duration gamma-ray bursts (GRBs) originate from distinct stellar progenitors. While long GRBs track ongoing star formation and result from the deaths of massive stars, short GRBs have been localized to both early and late-type galaxies, suggesting a more evolved progenitor population. Although the origin of short GRBs remains a mystery, the most popular and well-studied model is accretion following the merger of neutron star binaries. This model is qualitatively consistent with both the demographics of short GRBs and the lack of a bright associated supernova in some cases. Despite these successes, this picture has grown complex with the discovery that short GRBs are often followed by a "tail" of emission (usually soft X-rays) lasting 100 seconds after the burst. Such energetic, late-time emission from the central engine is difficult to explain in standard merger pictures. One proposed explanation is late-time "fall-back" onto the black hole of material that was ejected during the merger into highly eccentric, marginally-bound orbits. As this matter decompresses from nuclear densities, however, it undergoes rapid-neutron capture (r-process) nucleosynthesis, which can release energy comparable to the orbital binding energy. This implies that the r-process (normally thought unimportant dynamically in astrophysical contexts) has important implications for the quantity and time-dependence of fall-back and, ultimately, the source of flaring and identity of the central engine.

Perspectives on knowledge in engineering design

Science.gov (United States)

Rasdorf, W. J.

1985-01-01

Various perspectives are given of the knowledge currently used in engineering design, specifically dealing with knowledge-based expert systems (KBES). Constructing an expert system often reveals inconsistencies in domain knowledge while formalizing it. The types of domain knowledge (facts, procedures, judgments, and control) differ from the classes of that knowledge (creative, innovative, and routine). The feasible tasks for expert systems can be determined based on these types and classes of knowledge. Interpretive tasks require reasoning about a task in light of the knowledge available, where generative tasks create potential solutions to be tested against constraints. Only after classifying the domain by type and level can the engineer select a knowledge-engineering tool for the domain being considered. The critical features to be weighed after classification are knowledge representation techniques, control strategies, interface requirements, compatibility with traditional systems, and economic considerations.

Choosing a Global Positioning System Device for Use in U.S. Army Corps of Engineers Regulatory Districts

Science.gov (United States)

2017-12-01

ERDC) solves the nation’s toughest engineering and environmental challenges. ERDC develops innovative solutions in civil and military engineering ...communication with Jennifer Goulet via email. 5 September. Washington, DC: U.S. Army Corps of Engineers Civil Works, Geospatial Community of Practice...of Engineers Regulatory Districts Co ld R eg io ns R es ea rc h an d En gi ne er in g La bo ra to ry Jennifer J. Goulet, Lindsey E. Lefebvre

Differential contributions of specimen types, culturing, and 16S rRNA sequencing in diagnosis of prosthetic joint infections

DEFF Research Database (Denmark)

Larsen, Lone Heimann; Khalid, Vesal; Xu, Yijuan

2018-01-01

Prosthetic joint failure is mainly caused by infection, aseptic failure (AF), and mechanical problems. Infection detection has been improved with modified culture methods and molecular diagnostics. However, comparisons between modified and conventional microbiology methods are difficult due...... to variations in specimen sampling. In this prospective, multidisciplinary study of hip or knee prosthetic failures, we assessed the contributions of different specimen types, extended culture incubations, and 16S rRNA sequencing for diagnosing prosthetic joint infections (PJI). Project specimens included joint...... fluid (JF), bone biopsy specimens (BB), soft-tissue biopsy specimens (STB), and swabs (SW) from the prosthesis, collected in situ, and sonication fluid collected from prosthetic components (PC). Specimens were cultured for 6 (conventional) or 14 days, and 16S rRNA sequencing was performed at study...

14 CFR 91.529 - Flight engineer requirements.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer requirements. 91.529...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer... flight engineer certificate: (1) An airplane for which a type certificate was issued before January 2...

Knowledge translation in rehabilitation engineering research and development: a knowledge ecosystem framework.

Science.gov (United States)

Chau, Tom; Moghimi, Saba; Popovic, Milos R

2013-01-01

Rehabilitation engineering is concerned with technology innovations and technology-mediated treatments for the improvement of quality of care and quality of life of individuals with disability. Unlike many other fields of health research, the knowledge translation (KT) cycle of rehabilitation engineering research and development (R&D) is often considered incomplete until a technology product or technology-facilitated therapy is available to target clientele. As such, the KT journey of rehabilitation engineering R&D is extremely challenging, necessarily involving knowledge exchange among numerous players across multiple sectors. In this article, we draw on recent literature about the knowledge trichotomy in technology-based rehabilitation R&D and propose a knowledge ecosystem to frame the rehabilitation engineering KT process from need to product. Identifying the principal process of the ecosystem as one of knowledge flow, we elucidate the roles of repository and networked knowledge, identify key consumers and producers in a trinity of communities of practice, and draw on knowledge management literature to describe different knowledge flows. The article concludes with instantiations of this knowledge ecosystem for 2 local rehabilitation engineering research-development-commercialization endeavors. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

R - evolution in Time Series Analysis Software Applied on R - omanian Capital Market

Directory of Open Access Journals (Sweden)

Ciprian ALEXANDRU

2014-06-01

Full Text Available Worldwide and during the last decade, R has developed in a balanced way and nowadays it represents the most powerful tool for computational statistics, data science and visualization. Millions of data scientists use R to face their most challenging problems in topics ranging from economics to engineering and genetics. In this study, R was used to compute data on stock market prices in order to build trading models and to estimate the evolution of the quantitative financial market. These models were already applied on the international capital markets. In Romania, the quantitative modeling of capital market is available only for clients of trading brokers because the time series data are collected for the commercial purpose; in that circumstance, the statistical computing tools meet the inertia to change. This paper aims to expose a small part of the capability of R to use mix-and-match models and cutting-edge methods in statistics and quantitative modeling in order to build an alternative way to analyze capital market in Romania over the commercial threshold.

Protein tyrosine phosphatase receptor type R deficient mice exhibit increased exploration in a new environment and impaired novel object recognition memory

NARCIS (Netherlands)

Erkens, M.; Bakker, B.; Duijn, L.M. van; Hendriks, W.J.A.J.; Zee, C.E.E.M. van der

2014-01-01

Mouse gene Ptprr encodes multiple protein tyrosine phosphatase receptor type R (PTPRR) isoforms that negatively regulate mitogen-activated protein kinase (MAPK) signaling pathways. In the mouse brain, PTPRR proteins are expressed in cerebellum, olfactory bulb, hippocampus, amygdala and perirhinal

Dissecting engineered cell types and enhancing cell fate conversion via CellNet

Science.gov (United States)

Morris, Samantha A.; Cahan, Patrick; Li, Hu; Zhao, Anna M.; San Roman, Adrianna K.; Shivdasani, Ramesh A.; Collins, James J.; Daley, George Q.

2014-01-01

SUMMARY Engineering clinically relevant cells in vitro holds promise for regenerative medicine, but most protocols fail to faithfully recapitulate target cell properties. To address this, we developed CellNet, a network biology platform that determines whether engineered cells are equivalent to their target tissues, diagnoses aberrant gene regulatory networks, and prioritizes candidate transcriptional regulators to enhance engineered conversions. Using CellNet, we improved B cell to macrophage conversion, transcriptionally and functionally, by knocking down predicted B cell regulators. Analyzing conversion of fibroblasts to induced hepatocytes (iHeps), CellNet revealed an unexpected intestinal program regulated by the master regulator Cdx2. We observed long-term functional engraftment of mouse colon by iHeps, thereby establishing their broader potential as endoderm progenitors and demonstrating direct conversion of fibroblasts into intestinal epithelium. Our studies illustrate how CellNet can be employed to improve direct conversion and to uncover unappreciated properties of engineered cells. PMID:25126792

Computational Cardiac Modeling Reveals Mechanisms of Ventricular Arrhythmogenesis in Long QT Syndrome Type 8: CACNA1C R858H Mutation Linked to Ventricular Fibrillation

Directory of Open Access Journals (Sweden)

Jieyun Bai

2017-10-01

Full Text Available Functional analysis of the L-type calcium channel has shown that the CACNA1C R858H mutation associated with severe QT interval prolongation may lead to ventricular fibrillation (VF. This study investigated multiple potential mechanisms by which the CACNA1C R858H mutation facilitates and perpetuates VF. The Ten Tusscher-Panfilov (TP06 human ventricular cell models incorporating the experimental data on the kinetic properties of L-type calcium channels were integrated into one-dimensional (1D fiber, 2D sheet, and 3D ventricular models to investigate the pro-arrhythmic effects of CACNA1C mutations by quantifying changes in intracellular calcium handling, action potential profiles, action potential duration restitution (APDR curves, dispersion of repolarization (DOR, QT interval and spiral wave dynamics. R858H “mutant” L-type calcium current (ICaL augmented sarcoplasmic reticulum calcium content, leading to the development of afterdepolarizations at the single cell level and focal activities at the tissue level. It also produced inhomogeneous APD prolongation, causing QT prolongation and repolarization dispersion amplification, rendering R858H “mutant” tissue more vulnerable to the induction of reentry compared with other conditions. In conclusion, altered ICaL due to the CACNA1C R858H mutation increases arrhythmia risk due to afterdepolarizations and increased tissue vulnerability to unidirectional conduction block. However, the observed reentry is not due to afterdepolarizations (not present in our model, but rather to a novel blocking mechanism.

Study of working fluid selection of organic Rankine cycle (ORC) for engine waste heat recovery

International Nuclear Information System (INIS)

Wang, E.H.; Zhang, H.G.; Fan, B.Y.; Ouyang, M.G.; Zhao, Y.; Mu, Q.H.

2011-01-01

Organic Rankine Cycle (ORC) could be used to recover low-grade waste heat. When a vehicle is running, the engine exhaust gas states have a wide range of variance. Defining the operational conditions of the ORC that achieve the maximum utilization of waste heat is important. In this paper the performance of different working fluids operating in specific regions was analyzed using a thermodynamic model built in Matlab together with REFPROP. Nine different pure organic working fluids were selected according to their physical and chemical properties. The results were compared in the regions when net power outputs were fixed at 10 kW. Safety levels and environmental impacts were also evaluated. The outcomes indicate that R11, R141b, R113 and R123 manifest slightly higher thermodynamic performances than the others; however, R245fa and R245ca are the most environment-friendly working fluids for engine waste heat-recovery applications. The optimal control principle of ORC under the transient process is discussed based on the analytical results. -- Highlights: → R11, R141b, R113 and R123 manifest the best thermodynamic performances. → R245fa and R245ca are the most environment-friendly working fluids for the engine waste heat-recovery application. → The condensing temperature has more important effect than the evaporating pressure to the performance of ORC. → The optimal control principle of ORC under the transient process was defined according to the calculation results for the vehicle engine waste heat-recovery application. → ORC thermodynamic model was built in Matlab together with REFPROP.

Impact of motorboats on fish embryos depends on engine type.

Science.gov (United States)

Jain-Schlaepfer, Sofia; Fakan, Eric; Rummer, Jodie L; Simpson, Stephen D; McCormick, Mark I

2018-01-01

Human generated noise is changing the natural underwater soundscapes worldwide. The most pervasive sources of underwater anthropogenic noise are motorboats, which have been found to negatively affect several aspects of fish biology. However, few studies have examined the effects of noise on early life stages, especially the embryonic stage, despite embryo health being critical to larval survival and recruitment. Here, we used a novel setup to monitor heart rates of embryos from the staghorn damselfish ( Amblyglyphidodon curacao ) in shallow reef conditions, allowing us to examine the effects of in situ boat noise in context with real-world exposure. We found that the heart rate of embryos increased in the presence of boat noise, which can be associated with the stress response. Additionally, we found 2-stroke outboard-powered boats had more than twice the effect on embryo heart rates than did 4-stroke powered boats, showing an increase in mean individual heart rate of 1.9% and 4.6%, respectively. To our knowledge this is the first evidence suggesting boat noise elicits a stress response in fish embryo and highlights the need to explore the ecological ramifications of boat noise stress during the embryo stage. Also, knowing the response of marine organisms caused by the sound emissions of particular engine types provides an important tool for reef managers to mitigate noise pollution.

Komparace dvou systémů prodeje společnosti adidas ČR s.r.o.

OpenAIRE

Dolejší, Kateřina

2011-01-01

The primary aim of the diploma thesis is to evaluate the pros and cons of two types of sales systems at adidas ČR, i.e. the franchise stores and own adidas Concept Stores. On the basis of an analysis of the compared sales systems, the thesis suggests improvement measures for both systems and provides recommendations for similar types of retail formats. The thesis should make clear the issue of running a franchised business as compared to running an own retail shop of adidas ČR s.r.o. by intro...

FY10 Engineering Innovations, Research and Technology Report

Energy Technology Data Exchange (ETDEWEB)

Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

2011-01-11

This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

Engineered biosynthesis of regioselectively modified aromatic polyketides using bimodular polyketide synthases.

Directory of Open Access Journals (Sweden)

Yi Tang

2004-02-01

incorporated into the backbone rather than the number of elongation cycles; and (iii in contrast, auxiliary PKS enzymes such as ketoreductases, aromatases, and cyclases recognize specific functional groups in the backbone rather than overall chain length. Among the anthracyclines engineered in this study were compounds with (i more superior activity than R1128 against the breast cancer cell line MCF-7 and (ii inhibitory activity against glucose-6-phosphate translocase, an attractive target for the treatment of Type II diabetes.

Tissue Engineering in der Hals-Nasen-Ohrenheilkunde, Kopf- und Halschirurgie

Science.gov (United States)

Bücheler, Markus; Bootz, Friedrich

Tissue Engineering ist eine Schlüsseltechnologie für den Gewebeersatz der Zukunft. Am Beispiel der Hals-Nasen-Ohrenheilkunde, Kopf- und Halschirurgie werden klinisch etablierte Gewebeersatzmethoden und aktuelle Entwicklungen des Tissue Engineering gegenübergestellt. Die Besonderheiten der zu ersetzenden Gewebe im Kopf- und Halsbereich erfordert vielfältige Ersatzverfahren. Im klinischen Alltag werden heute vor allem autogene Transplantate und Implantate für den Gewebeersatz verwendet [1]. In vitro hergestellte Gewebe werden abgesehen von Einzelanwendungen zur Zeit noch nicht am Patienten eingesetzt.

Type classes for mathematics in type theory

OpenAIRE

Spitters, Bas; Van der Weegen, Eelis

2011-01-01

The introduction of first-class type classes in the Coq system calls for re-examination of the basic interfaces used for mathematical formalization in type theory. We present a new set of type classes for mathematics and take full advantage of their unique features to make practical a particularly flexible approach formerly thought infeasible. Thus, we address both traditional proof engineering challenges as well as new ones resulting from our ambition to build upon this development a library...

Profiling N-Type Dopants in Silicon

Czech Academy of Sciences Publication Activity Database

Hovorka, Miloš; Mika, Filip; Mikulík, P.; Frank, Luděk

2010-01-01

Roč. 51, č. 2 (2010), s. 237-242 ISSN 1345-9678 R&D Projects: GA ČR GP102/09/P543; GA AV ČR IAA100650803 Institutional research plan: CEZ:AV0Z20650511 Keywords : silicon * dopant contrast * photoemission electron microscopy * scanning electron microscopy Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.779, year: 2010 http://www.jim.or.jp/journal/e/51/02/237.html

Arabidopsis R2R3-MYB transcription factor AtMYB60 functions as a transcriptional repressor of anthocyanin biosynthesis in lettuce (Lactuca sativa).