WorldWideScience

Sample records for energy consumption caprolactam

  1. Energy consumption: energy consumption in mainland Norway

    Energy Technology Data Exchange (ETDEWEB)

    Magnussen, Inger Helene; Killingland, Magnus; Spilde, Dag

    2012-07-25

    The purpose of this report is to describe trends in energy consumption in mainland Norway, with an emphasis on key trends within the largest consumer groups. We also explain common terms and concepts in the field of energy consumption. Finally, we look at forecasts for future energy consumption, produced by bodies outside NVE. Total final energy consumption in mainland Norway in 2009 was 207 TWh. The most important end-user groups are households, service industries, manufacturing industry and transport. In addition, the energy sector in mainland Norway consumed 15 TWh. Energy consumed in the energy sector is not considered as final consumption, as the energy is used to produce new energy products. The long-term trend in energy consumption in mainland Norway is that fuel in the transport sector and electricity for the energy sector increases, while energy consumption in other sectors flattens out. The main reason for an increased use of fuel in the transport sector is the rise in the number of motorised machinery and vehicles in mainland Norway. This has caused a rise in gasoline and diesel consumption of 75 per cent since 1976. The petroleum sector is the largest consumer of energy within the energy sector in mainland Norway, and electricity from onshore to platforms in the North Sea and to new shore side installations has led to a rise in electricity consumption from 1 TWh in 1995 to 5 TWh in 2009. The energy consumption in households showed flat trend from 1996 to 2009, after many years of growth. The main reasons are a warmer climate, higher energy prices, the use of heats pumps and more energy-efficient buildings. In the service industries, the growth in energy consumptions has slightly decreased since the late 1990s, for much the same reasons as for households. In manufacturing industries the energy consumption have flatten out mainly due to the closure of energy-intensive businesses and the establishment of new more energy-efficient businesses. Electricity is

  2. Energy-consumption modelling

    Energy Technology Data Exchange (ETDEWEB)

    Reiter, E.R.

    1980-01-01

    A highly sophisticated and accurate approach is described to compute on an hourly or daily basis the energy consumption for space heating by individual buildings, urban sectors, and whole cities. The need for models and specifically weather-sensitive models, composite models, and space-heating models are discussed. Development of the Colorado State University Model, based on heat-transfer equations and on a heuristic, adaptive, self-organizing computation learning approach, is described. Results of modeling energy consumption by the city of Minneapolis and Cheyenne are given. Some data on energy consumption in individual buildings are included.

  3. Interactive energy consumption visualization

    CSIR Research Space (South Africa)

    Lunga, D

    2014-11-01

    Full Text Available in an office building environment. The main goal is to highlight high consumptions patterns, estimate costs and savings, and recommend energy saving strategies. In its useful nature, the dashboard can provide valuable information for further programs tied...

  4. Caprolactam production by direct solar flux

    Energy Technology Data Exchange (ETDEWEB)

    Talukdar, J.; Wong, E.H.S.; Mathur, V.K. (Univ. of New Hampshire, Durham (United States))

    1991-01-01

    The use of solar energy for the photonitrozation of cyclohexane for the production of cyclohexanone oxime hydrochloride, an intermediate for the manufacture of caprolactam, is discussed. Experimental results show the technical feasibility of such a reaction in the presence of radiation of wavelength 350-550 nm simulating sunlight.

  5. Energy consumption in pigsties

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, F.

    1984-09-01

    The examinations have been carried out under practical conditions and have comprised registration of the energy consumption in piggeries for ventilation, heating, feed preparation, feeding and handling of manure. Concerning the measuring technique. it was easy to register the energy consumption for the various branches of the pig production, whereas it is more difficult to explain the results because the variations from one house to another were very big. There are many variations, but concerning the ventilation plants, it is mainly a question of air flow per animal, of desired indoor temperature, of insulation, and especially the age of the ventilation plant, because the output of air per kWh of the plants has increased considerably during recent years. Concerning the heating, a big consumption is in most cases caused by a poor regulation of heating and ventilation. As basis is used the average respectively the minimum and the maximum energy consumption per animal place per year registered in the examination, as well as a pig production unit of 100 sows producing 2000 piglets and bacon pigs per year.

  6. Energy consumption projection of Nepal

    DEFF Research Database (Denmark)

    Parajuli, Ranjan; Østergaard, Poul Alberg; Dalgaard, Tommy

    2014-01-01

    In energy dependent economies, energy consumption is often linked with the growth in Gross Domestic Product (GDP). Energy intensity, defined herewith, as the ratio of the total primary energy consumption (TPE) to the GDP, is a useful concept for understanding the relation between energy demand...... and economic development. The scope of this article is to assess the future primary energy consumption of Nepal, and the projection is carried out along with the formulation of simple linear logarithmic energy consumption models. This initiates with a hypothesis that energy consumption is dependent...... with the national macro-economic parameters. To test the hypothesis, nexus between energy consumption and possible determinant variables are examined. Status of energy consumption between the period of 1996 and 2009, and for the same period, growth of economic parameters are assessed. Three scenarios are developed...

  7. Manufacturing consumption of energy 1991

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  8. Monitoring Energy Consumption of Smartphones

    OpenAIRE

    Ding, Fangwei; Xia, Feng; Zhang, Wei; Zhao, Xuhai; Ma, Chengchuan

    2011-01-01

    With the rapid development of new and innovative applications for mobile devices like smartphones, advances in battery technology have not kept pace with rapidly growing energy demands. Thus energy consumption has become a more and more important issue of mobile devices. To meet the requirements of saving energy, it is critical to monitor and analyze the energy consumption of applications on smartphones. For this purpose, we develop a smart energy monitoring system called SEMO for smartphones...

  9. Energy consumption trends in Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, Abidin; Yalcintas, Melek [AMEL Technologies, Inc, 2800 Woodlawn Drive, Suite 251, Honolulu, HI 96822 (United States)

    2010-03-15

    This study begins with a review of energy consumption by end-use sector in Hawaii. Then, the energy generated from renewable energy sources is analyzed between 1991 and 2006. The results show that while geothermal is a considerable source of renewable energy on the Island of Hawaii (also known as Big Island), fossil fuel is the main energy source in the State of Hawaii. The energy intensity index for the State of Hawaii is then calculated by dividing energy consumption per capita by the income per capita. The calculated energy intensity index reveals that energy consumption is directly controlled by per capita income. The results also indicate that the energy intensity index increases over time despite positive developments in energy efficient technologies. In the second part of the paper, the effect of the tourism industry on energy usage in the State of Hawaii is analyzed. The results show that tourism volume, measured in terms of tourist arrival numbers, does not change the energy consumption directly. However, a change in tourism volume does affect per capita income within a few months to a year. In the last part of the study, the energy efficiency index of Hawaii is compared with consumption averages for the US, California and the most energy efficient country in Europe, Denmark. The comparison shows that Hawaii lags behind California and Denmark in terms of energy efficiency. The comparison also shows that an increase in energy efficiency corresponds to an increase in per capita income across the board, which is in agreement with a recent report published by the American Physical Society. (author)

  10. Energy sustainability: consumption, efficiency, and ...

    Science.gov (United States)

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

  11. Greenhouse energy consumption

    Science.gov (United States)

    Eric van Steenis

    2009-01-01

    Depending on location and luck, natural gas rates have gone from less that CAN$ 3.00 to more than CAN$ 20.00/gigajoule (Gj). Natural gas rates are currently around CAN$ 13.00/Gj, although industry "analysts" predict an increase. A gigajoule is equivalent to the energy released by the combustion of approximately 30 L (8 gal) of gasoline. It is also equivalent...

  12. Manufacturing consumption of energy 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  13. Hypercoagulability after energy drink consumption.

    Science.gov (United States)

    Pommerening, Matthew J; Cardenas, Jessica C; Radwan, Zayde A; Wade, Charles E; Holcomb, John B; Cotton, Bryan A

    2015-12-01

    Energy drink consumption in the United States has more than doubled over the last decade and has been implicated in cardiac arrhythmias, myocardial infarction, and even sudden cardiac death. We hypothesized that energy drink consumption may increase the risk of adverse cardiovascular events by increasing platelet aggregation, thereby resulting in a relatively hypercoagulable state and increased risk of thrombosis. Thirty-two healthy volunteers aged 18-40 y were given 16 oz of bottled water or a standardized, sugar-free energy drink on two separate occasions, 1-wk apart. Beverages were consumed after an overnight fast over a 30-min period. Coagulation parameters and platelet function were measured before and 60 min after consumption using thrombelastography and impedance aggregometry. No statistically significant differences in coagulation were detected using kaolin or rapid thrombelastography. In addition, no differences in platelet aggregation were detected using ristocetin, collagen, thrombin receptor-activating peptide, or adenosine diphosphate-induced multiple impedance aggregometry. However, compared to water controls, energy drink consumption resulted in a significant increase in platelet aggregation via arachidonic acid-induced activation (area under the aggregation curve, 72.4 U versus 66.3 U; P = 0.018). Energy drinks are associated with increased platelet activity via arachidonic acid-induced platelet aggregation within 1 h of consumption. Although larger clinical studies are needed to further address the safety and health concerns of these drinks, the increased platelet response may provide a mechanism by which energy drinks increase the risk of adverse cardiovascular events. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Purification of caprolactam from recycled nylon

    Science.gov (United States)

    Moens, Luc

    1999-01-01

    A method of removing 1,11-diamino-6-undecanone from the pyrolysis product of nylon comprising: a) pyrolyzing nylon-6 to form a pyrolyzate containing a caprolactam mixture; b) dissolving the caprolactam mixture in a solvent to form a solution; c) passing carbon dioxide gas through the solution to form a precipitate; d) removing the precipitate from the solution; and e) recovering the purified caprolactam from the solution.

  15. Household vehicles energy consumption 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.

  16. State energy data report 1992: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This is a report of energy consumption by state for the years 1960 to 1992. The report contains summaries of energy consumption for the US and by state, consumption by source, comparisons to other energy use reports, consumption by energy use sector, and describes the estimation methodologies used in the preparation of the report. Some years are not listed specifically although they are included in the summary of data.

  17. Household energy consumption and expenditures 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-05

    This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

  18. Household vehicles energy consumption 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-09

    The purpose of this report is to provide information on the use of energy in residential vehicles in the 50 States and the District of Columbia. Included are data about: the number and type of vehicles in the residential sector, the characteristics of those vehicles, the total annual Vehicle Miles Traveled (VMT), the per household and per vehicle VMT, the vehicle fuel consumption and expenditures, and vehicle fuel efficiencies. The data for this report are based on the household telephone interviews from the 1991 RTECS, conducted during 1991 and early 1992. The 1991 RTECS represents 94.6 million households, of which 84.6 million own or have access to 151.2 million household motor vehicles in the 50 States and the District of Columbia.

  19. State Energy Data Report, 1991: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to the Government, policy makers, and the public; and (2) to provide the historical series necessary for EIA`s energy models.

  20. State energy data report 1993: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.

  1. State energy data report 1994: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA`s energy models. Division is made for each energy type and end use sector. Nuclear electric power is included.

  2. State energy data report 1996: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

  3. The Relationship Between Energy Consumption and Economic ...

    African Journals Online (AJOL)

    In this study, an attempt has been made to examine causality relationship between energy consumption and economic growth in Nigeria by employing Granger causality test for 1980-2010 period. The results obtained herein revealed that there exist a unidirectional causality running from energy consumption to economic ...

  4. Energy consumption in a dye works

    Energy Technology Data Exchange (ETDEWEB)

    Aird, R.J.; Bruffell, P.D.; Wooldridge, D.M.

    1984-06-01

    Basic engineering principles were used to estimate the energy consumption in specific areas of a small dye works. This energy was related to production and heating requirements and this was found to correspond with historical data. The reduction in fuel consumption due to insulation of the steam supply was predicted and the achieved saving was clearly demonstrated using a cumulative sum chart.

  5. Residential Energy Consumption Survey: Quality Profile

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

  6. Estimates of US biomass energy consumption 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-06

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

  7. State energy data report 1995 - consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public, and (2) to provide the historical series necessary for EIA`s energy models.

  8. Energy Beverage Consumption Among Naval Aviation Candidates.

    Science.gov (United States)

    Sather, Thomas E; Delorey, Donald R

    2016-06-01

    Since the debut of energy beverages, the consumption of energy beverages has been immensely popular with young adults. Research regarding energy beverage consumption has included college students, European Union residents, and U.S. Army military personnel. However, energy beverage consumption among naval aviation candidates in the United States has yet to be examined. The purpose of this study was to assess energy beverage consumption patterns (frequency and volume) among naval aviation candidates, including attitudes and perceptions regarding the benefits and safety of energy beverage consumption. A 44-item survey was used to assess energy beverage consumption patterns of 302 students enrolled in the Aviation Preflight Indoctrination Course at Naval Air Station Pensacola, FL. Results indicated that 79% of participants (N = 239) reported consuming energy beverages within the last year. However, of those who reported consuming energy beverages within the last year, only 36% (N = 85) reported consuming energy beverages within the last 30 d. Additionally, 51% (N = 153) of participants reported no regular energy beverages consumption. The majority of participants consumed energy beverages for mental alertness (67%), mental endurance (37%), and physical endurance (12%). The most reported side effects among participants included increased mental alertness (67%), increased heart rate (53%), and restlessness (41%). Naval aviation candidates appear to use energy drinks as frequently as a college student population, but less frequently than expected for an active duty military population. The findings of this study indicate that naval aviation candidates rarely use energy beverages (less than once per month), but when consumed, they use it for fatigue management.

  9. "Movable platform" - the idea and energy consumption

    Directory of Open Access Journals (Sweden)

    Czesław PYPNO

    2011-01-01

    Full Text Available This paper presents the application of the concept of moving sidewalks at railway stations (the movable platform including the calculation of electricity consumption. Particular focus was placed on issue of energy profit and loss in two stages - through the loss (consumption of energy by using a moving sidewalk at a railway station platform and the profit (reduced consumption of energy, by the lack of having to start the train, that supports movable platform, from the initial speed of 0 km/h.

  10. Economic Development, Urbanisation, Energy Consumption and ...

    African Journals Online (AJOL)

    Economic Development, Urbanisation, Energy Consumption and Climate Change Management in Nigeria. ... Journal Home > Vol 46, No 3 (2016) > ... If this energy is from traditional energy sources, then this translates into increased greenhouse gas emissions which lead to accelerated global warming and climate change.

  11. Flexible Energy Consumption in Smart House's

    DEFF Research Database (Denmark)

    Madsen, Per Printz

    2012-01-01

    the consumer have to use the energy when it is available. The main electrical energy consumer in a modern society is buildings and private homes. The amount of electrical energy used in this sector is about 70% of the total electricity consumption. Because of that buildings and private homes has to play...

  12. ENERGY AUDIT AS TOOL FOR DECREASING OF ENERGY CONSUMPTION

    Directory of Open Access Journals (Sweden)

    Tirshu M.

    2013-12-01

    Full Text Available The paper presents results of the energy audit for seven public organizations. Audits were performed in 2013 by the staff of the Institute of Power Engineering of the ASM. The staff is authorized in the field of electricity and thermal energy. Four energy audits were for energy efficiency in buildings; two energy audits were for efficient public lighting system and one for efficient lighting system within the organization. For each organization were highlighted major problems which lead to increased energy consumption and proposed several measures that help reduce energy consumption and reduce CO2 emissions. Also describes methods for the measurements and the equipment used. It presents characteristic problems typified by object class and how to overcome them. Energy consumption is determined for both - baseline energy consumption and after implementing the proposed measures. Also, the necessary investments, the results obtained after investments and the payback periods for each proposed measures as well as a whole are presented.

  13. Uncertainty analysis of energy consumption in dwellings

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Trine Dyrstad

    1997-12-31

    This thesis presents a comprehensive study of an energy estimation model that can be used to examine the uncertainty of predicted energy consumption in a dwelling. The variation and uncertainty of input parameters due to the outdoor climate, the building construction and the inhabitants are studied as a basis for further energy evaluations. The occurring variations of energy consumption in nominal similar dwellings are also investigated due to verification of the simulated energy consumption. The main topics are (1) a study of expected variations and uncertainties in both input parameters used in energy consumption calculations and the energy consumption in the dwelling, (2) the development and evaluation of a simplified energy calculation model that considers uncertainties due to the input parameters, (3) an evaluation of the influence of the uncertain parameters on the total variation so that the most important parameters can be identified, and (4) the recommendation of a simplified procedure for treating uncertainties or possible deviations from average conditions. 90 refs., 182 figs., 73 tabs.

  14. Energy: Production, Consumption, and Consequences.

    Science.gov (United States)

    Helm, John L., Ed.

    Energy policy in the United States and much of the analysis behind those policies is largely incomplete according to many. Systems for energy production, distribution, and use have traditionally been analyzed by supply sector, yet such analyses cannot capture the complex interplay of technology, economics, public policy, and environmental concerns…

  15. Energy consumption for shortcuts to adiabaticity

    Science.gov (United States)

    Torrontegui, E.; Lizuain, I.; González-Resines, S.; Tobalina, A.; Ruschhaupt, A.; Kosloff, R.; Muga, J. G.

    2017-08-01

    Shortcuts to adiabaticity let a system reach the results of a slow adiabatic process in a shorter time. We propose to quantify the "energy cost" of the shortcut by the energy consumption of the system enlarged by including the control device. A mechanical model where the dynamics of the system and control device can be explicitly described illustrates that a broad range of possible values for the consumption is possible, including zero (above the adiabatic energy increment) when friction is negligible and the energy given away as negative power is stored and reused by perfect regenerative braking.

  16. Energy Consumption of Die Casting Operations

    Energy Technology Data Exchange (ETDEWEB)

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  17. Monthly Energy Consumption Forecasting Using Wavelet Analysis ...

    African Journals Online (AJOL)

    Monthly energy forecasts help heavy consumers of electric power to prepare adequate budget to pay their electricity bills and also draw the attention of management and stakeholders to electricity consumption levels so that energy efficiency measures are put in place to reduce cost. In this paper, a wavelet transform and ...

  18. Energy consumption of organisms and cities

    Energy Technology Data Exchange (ETDEWEB)

    Wieser, W.

    1985-02-01

    The amount of energy consumed by an organism per unit of time depends on its structure, size, life style and state and/or condition of development. Valid rules may be deduced from such relationships - at least for the animal realm - e.g. the fact that, within comparable categories and life forms, energy consumption will increase with body mass cubed or raised to the power of four; the fact that transition from the single-cell organization type to the one of multi-cell and from poikilothermic to homoiothermic animals was accompagnied by a strong rise of mass-specific energy consumption; and the fact that there are ontogenetic cycles of basal metabolic rate. Following the pattern of this biological approach, the question was asked whether or not characteristic relationships between energy consumption and size, etc. can be set up for cities as well. The statistical material available leads to a number of fairly unexpected conclusions.

  19. ENERGY CONSUMPTION AND REAL GDP IN IRAN

    Directory of Open Access Journals (Sweden)

    Ali Akbar Naji Meidani

    2014-01-01

    Full Text Available As one of the most important production factors and one of the most urgent final products, energy has a special position in the growth and development of the country. This paper examines the causal relationship between Real GDP and energy consumption in various economic sectors including (household and commercial, industry, transportation and agriculture sectors for Iran during 1967–2010 using the time series technique known as the Toda-Yamamoto method. Moreover, an error correction model is also estimated so that the results of these two methods are compared. We found a strong unidirectional causality from energy consumption in industry sector to real gross domestic product. Energy consumption in industry sector can observably promote the development of economy.

  20. The effect of energy performance regulations on energy consumption

    NARCIS (Netherlands)

    Guerra-Santin, O.; Itard, L.

    2012-01-01

    Governments have developed energy performance regulations in order to lower energy consumption in the housing stock. Most of these regulations are based on the thermal quality of the buildings. In the Netherlands, the energy efficiency for new buildings is expressed as the EPC (energy performance

  1. Cities and Energy Consumption: a Critical Review

    Directory of Open Access Journals (Sweden)

    Carmela Gargiulo

    2017-12-01

    Full Text Available The relationship between cities and energy consumption has been of great interest for the scientific community for over twenty years. Most of the energy consumption, indeed, occurs in cities because of the high concentration of human activities. Thus, cities are responsible for a big share of carbon dioxide emissions (CO2. However, the debate on this topic is still open, mainly because of the heterogeneity of published studies in the selection, definition and measurement of the urban features influencing energy consumption and CO2 emissions, as well as in the choice of the energy sectors to be considered, in the territorial scale of analysis, and in the geographical distribution of the sample. Therefore, the goal of this research is to systematize and compare the approach, methodology and results of the relevant literature on the relationship between cities and energy consumption over the last twenty years. Furthermore, this critical review identifies the knowledge gap between what is known and what is still under debate and, based on that, it proposes a conceptual framework that will help to outline a new direction for future research and support local policy makers in the definition of strategies and actions that can effectively reduce urban energy use and CO2 emissions.

  2. Energy consumption modeling during dairy sewage pretreatment

    Science.gov (United States)

    Dąbrowski, Wojciech; Żyłka, Radosław; Malinowski, Paweł; Boruszko, Dariusz

    2017-11-01

    The research was conducted in a dairy WWTP located in north-eastern Poland with the average flow of 546 m3d-1 and PE 11500 in 2016. Energy consumption was measured with the help of Lumel 3-phase network parameter transducers installed within the plant. The modeling was conducted based on the quantity and quality of raw sewage, after its screening, averaging and dissolved air flotation. The following parameters were determined: BOD5, COD. N-total and P-total. During the research period. 15 measurement series were carried out. Pollution loads removed in primary treatment varied from 167.0 to 803.5 kgO2d-1 and 1205.9 to 10032 kgO2d-1 for BOD5 and COD respectively. The energy consumption share during dairy pretreatment in relation to the total energy consumption was in the range from 13.8 to 28.5% with the mean value of 18.7% during the research period. Energy consumption indicators relating to removed pollution loads for primary treatment were established with the mean values of 0.74 and 0.83 kWhkg-1d-1 for BOD5 and COD respectively. An attempt was made to determine the influence of raw sewage characteristics and pretreatment efficiency on energy consumption of the object. A model of energy consumption during pretreatment was estimated according to the experimental data obtained in the research period. It was modeled using the linear regression model and principal component analysis.

  3. Energy Consumption of Fast Ferries in Danish Domestic Transport

    DEFF Research Database (Denmark)

    Petersen, Morten Steen; Jørgensen, Kaj

    1997-01-01

    Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark.......Analysis of energy consumption in connection with selected passenger transport trip chains. In particular the publication aims to evaluate the energy consumption of fast ferries in Denmark....

  4. A Meta Model for Domestic Energy Consumption

    Directory of Open Access Journals (Sweden)

    K.,J SREEKANTH

    2011-01-01

    Full Text Available Prediction of energy consumption particularly in micro level is of vital importance in terms of energy planning and also implementation of any Clean Development Mechanism (CDM activities that has become the order of the world today. It may be difficult to model household energy consumption using conventional methods such as time series forecasting due to many influencing factors. This paper presents a step wise regression model for forecasting domestic energy consumption based on micro level household survey data collected from Kerala, a state in southern part of India. The analysis of the data reveals significant influence of socio-economic, demographic, geographic, and family attributes upon total household energy requirements. While a wide variation in the pattern of energy requirements across the domestic sector belonging to different expenditure classes, per capita income level can be identified as the most important explanatory variable influencing variation in energy requirements. The models developed also demonstrates the influence of per capita land area, residential area among the higher income group while average age and literacy forms significant variables among the lower income group.

  5. Energy consumption in the pipeline industry

    Energy Technology Data Exchange (ETDEWEB)

    Banks, W. F.

    1977-12-31

    Estimates are developed of the energy consumption and energy intensity (EI) of five categories of U.S. pipeline industries: natural gas, crude oil, petroleum products, coal slurry, and water. For comparability with other transportation modes, it is desirable to calculate EI in Btu/Ton-Mile, and this is done, although the necessary unit conversions introduce additional uncertainties. Since water and sewer lines operate by lift and gravity, a comparable EI is not definable.

  6. Energy consumption in static muscle contraction

    NARCIS (Netherlands)

    Koerhuis, CL; Hof, AL; van der Heide, F.M.

    Energy consumption during static contraction of the human triceps surae muscles was studied in 11 healthy subjects. The subjects had to stand intermittently on the left and then right foot at different frequencies (for periods of 15 s, 10 s or 5 s), first on the whole foot and then on the forefoot.

  7. Environmental degradation, energy consumption, population growth ...

    African Journals Online (AJOL)

    Environmental degradation, energy consumption, population growth and economic growth: Does Environmental Kuznets curve matter for Nigeria? ... This means Nigeria has reached the required level of per capita real GDP to get an inverted U-shaped EKC. The main policy prescriptions among others is that Nigeria ...

  8. Energy consumption maps for quaternary distillation sequences

    DEFF Research Database (Denmark)

    Gomez-Castro, F.I.; Ramírez-Vallejo, N.E.; Segovia-Hernandez, J.G.

    2016-01-01

    Thermally coupled distillation columns represent a very interesting option for the intensification of distillation systems in order to reduce the energy consumption, and, as a consequence, the environmental impact of the separation process. Several thermally coupled distillation schemes can be ge...

  9. Energy sustainability: consumption, efficiency, and environmental impact

    Science.gov (United States)

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consump...

  10. Computer Profile of School Facilities Energy Consumption.

    Science.gov (United States)

    Oswalt, Felix E.

    This document outlines a computerized management tool designed to enable building managers to identify energy consumption as related to types and uses of school facilities for the purpose of evaluating and managing the operation, maintenance, modification, and planning of new facilities. Specifically, it is expected that the statistics generated…

  11. Machining strategies exploring reduction in energy consumption

    Science.gov (United States)

    Mamun, Abdullah Al

    The main aim of this thesis is to explore machining strategies, analyzing energy consumption using Design of Experiments (DOE) at the material removal rate (MRR), compare to cutting geometrical trajectories according to CNC parameters such as spindle RPM, feed rate, depth of cut per pass and total depth of cut. Spindle RPM, depth of cut per pass, and feed rate are selected as the main three factors and each factor has two levels: low-level (-) and high-level (+). These experiments have been performed at an end-milling machine by using a concept of a constant volume of material removal processes in the circular and linear geometrical slots in pine wood blocks. Standard energy logger equipment has used to measure energy consumption during end-milling operation. Different statistical analysis, such as ANOVA, regression line, and cause & effect diagram have used to show different energy consumption results in the material removal process. At the end the of data analysis, it is found that a significant amount of electricity demand is associated with machining pre-cutting & post-cutting stage and this significant amount of electricity demand is defined as peripheral energy. This peripheral energy is not involved in the actual performance of material removal process in the end-milling process. In the [Figure 11] end-milling process has been involved with pine wood blocks at constant volume of material removal (2.8 cubic inch) process. Results can be varied using of hard material removal process, such as steel & aluminum metals.

  12. Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

    Science.gov (United States)

    Poulos, Natalie S.; Pasch, Keryn E.

    2016-01-01

    Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

  13. Simulation Tool For Energy Consumption and Production

    DEFF Research Database (Denmark)

    Nysteen, Michael; Mynderup, Henrik; Poulsen, Bjarne

    2013-01-01

    In order to promote adoption of smart grid with the general public it is necessary to be able to visualize the benefits of a smart home. Software tools that model the effects can help significantly with this. However, only little work has been done in the area of simulating and visualizing...... the energy consumption in smart homes. This paper presents a prototype simulation tool that allows graphical modeling of a home. Based on the modeled homes the user is able to simulate the energy consumptions and compare scenarios. The simulations are based on dynamic weather and energy price data as well...... as well as appliances and other electrical components used in the modeled homes....

  14. Electrical energy consumption control apparatuses and electrical energy consumption control methods

    Science.gov (United States)

    Hammerstrom, Donald J.

    2012-09-04

    Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

  15. Assessing the Energy Consumption of Smartphone Applications

    Science.gov (United States)

    Abousaleh, Mustafa M.

    Mobile devices are increasingly becoming essential in people's lives. The advancement in technology and mobility factor are allowing users to utilize mobile devices for communication, entertainment, financial planning, fitness tracking, etc. As a result, mobile applications are also becoming important factors contributing to user utility. However, battery capacity is the limiting factor impacting the quality of user experience. Hence, it is imperative to understand how much energy impact do mobile apps have on the system relative to other device activities. This thesis presents a systematic studying of the energy impact of mobile apps features. Time-series electrical current measurements are collected from 4 different modern smartphones. Statistical analysis methodologies are used to calculate the energy impact of each app feature by identifying and extracting mobile app-feature events from the overall current signal. In addition, the app overhead energy costs are also computed. Total energy consumption equations for each component is developed and an overall total energy consumption equation is presented. Minutes Lost (ML) of normal phone operations due to the energy consumption of the mobile app functionality is computed for cases where the mobile app is simulated to run on the various devices for 30 minutes. Tutela Technologies Inc. mobile app, NAT, is used for this study. NAT has two main features: QoS and Throughput. The impact of the QoS feature is indistinguishable, i.e. ML is zero, relative to other phone activities. The ML with only the TP feature enabled is on average 2.1 minutes. Enabling the GPS increases the ML on average to 11.5 minutes. Displaying the app GUI interface in addition to running the app features and enabling the GPS results in an average ML of 12.4 minutes. Amongst the various mobile app features and components studied, the GPS consumes the highest amount of energy. It is estimated that the GPS increases the ML by about 448%.

  16. Urban transport energy consumption: Belgrade case study

    Directory of Open Access Journals (Sweden)

    Jovanović Miomir M.

    2015-01-01

    Full Text Available More than half of the global population now lives in towns and cities. At the same time, transport has become the highest single energy-consuming human activity. Hence, one of the major topics today is the reduction of urban transport demand and of energy consumption in cities. In this article we focused on the whole package of instruments that can reduce energy consumption and transport demand in Belgrade, a city that is currently at a major crossroad. Belgrade can prevent a dramatic increase in energy consumption and CO2 emissions (and mitigate the negative local environmental effects of traffic congestion, traffic accidents and air pollution, only if it: 1 implements a more decisive strategy to limit private vehicles use while its level of car passenger km (PKT is still relatively low; 2 does not try to solve its transport problems only by trying to build urban road infrastructure (bridges and ring roads; and 3 if it continues to provide priority movement for buses (a dominant form of public transport, while 4 at the same time developing urban rail systems (metro or LRT with exclusive tracks, immune to the traffic congestion on urban streets. [Projekat Ministarstva nauke Republike Srbije, br. 37010

  17. 2014 Navajo Nation Energy and Water Consumption

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Suzanne L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Woods, Sam [Navajo Transitional Energy Company, Farmington, NM (United States)

    2017-03-31

    The Navajo Nation is the home of the largest land-based Indian reservation in the U.S., covering more than twenty-seven thousand square miles. The land in the southwestern U.S. holds an abundance of natural resources, which are intimately integrated in the history, economy, and growth of the Navajo tribe. This report aims to wholly visualize the Navajo Nation’s resources and energy and water consumption using quantitative data and systems engineering analysis. The energy and water flow chart visualizations provide structured information for tribal leaders, policymakers, and educators around energy and water system discussions, technology development opportunities, and policy decisions. The analysis of both energy and water is a first step to visualizing the interconnectedness and complexities of the energy-water-food nexus of the nation. The goal of this energy analysis was to first estimate coal resource consumption because of the considerable impact coal has on the Navajo economy, recently as much as $26 million per year in coal royalties.

  18. Comparing the Life Cycle Energy Consumption, Global ...

    Science.gov (United States)

    Managing the water-energy-nutrient nexus for the built environment requires, in part, a full system analysis of energy consumption, global warming and eutrophication potentials of municipal water services. As an example, we evaluated the life cycle energy use, greenhouse gas (GHG) emissions and aqueous nutrient releases of the whole anthropogenic municipal water cycle starting from raw water extraction to wastewater treatment and reuse/discharge for five municipal water and wastewater systems. The assessed options included conventional centralized services and four alternative options following the principles of source-separation and water fit-for-purpose. The comparative life cycle assessment identified that centralized drinking water supply coupled with blackwater energy recovery and on-site greywater treatment and reuse was the most energyand carbon-efficient water service system evaluated, while the conventional (drinking water and sewerage) centralized system ranked as the most energy- and carbon-intensive system. The electricity generated from blackwater and food residuals co-digestion was estimated to offset at least 40% of life cycle energy consumption for water/waste services. The dry composting toilet option demonstrated the lowest life cycle eutrophication potential. The nutrients in wastewater effluent are the dominating contributors for the eutrophication potential for the assessed system configurations. Among the parameters for which variability

  19. Seasonal population dynamics and energy consumption by ...

    African Journals Online (AJOL)

    The total wet mass of prey items ingested by waterbirds ranged from 2.8 kg ha−1 during winter to 8.5 kg ha−1 during summer. The total energy consumption of waterbirds ranged from 12 543 kJ ha−1 during June to 33 104 kJ ha−1 during December. Shannon–Wiener diversity calculations revealed that the Kowie Estuary ...

  20. Nonresidential Building Energy Consumption Survey (NBECS)

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, D.M.; Tsao, H.J.; Schmoyer, R.L. Jr.; MacDonald, J.M.

    1990-10-01

    Imputation procedures were designed for the 1983 Nonresidential Buildings Energy Consumption Survey (NBECS) of the Energy Information Administration (EIA) using 1979 NBECS data. The study included methodology development, data analysis, regression analyses, empirical evaluations of the regression models, and imputation procedures. Models considered were engineering models, stepwise regression, weighted regression, nonlinear regression, and log transformation regression. A method for determining the appropriateness of the imputation model for a particular set of independent variables is recommended. Although this study was completed in 1985, this final version of the report is being issued due to continuing requests for information. 32 tabs.

  1. Oil pipeline energy consumption and efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Hooker, J.N.

    1981-01-01

    This report describes an investigation of energy consumption and efficiency of oil pipelines in the US in 1978. It is based on a simulation of the actual movement of oil on a very detailed representation of the pipeline network, and it uses engineering equations to calculate the energy that pipeline pumps must have exerted on the oil to move it in this manner. The efficiencies of pumps and drivers are estimated so as to arrive at the amount of energy consumed at pumping stations. The throughput in each pipeline segment is estimated by distributing each pipeline company's reported oil movements over its segments in proportions predicted by regression equations that show typical throughput and throughput capacity as functions of pipe diameter. The form of the equations is justified by a generalized cost-engineering study of pipelining, and their parameters are estimated using new techniques developed for the purpose. A simplified model of flow scheduling is chosen on the basis of actual energy use data obtained from a few companies. The study yields energy consumption and intensiveness estimates for crude oil trunk lines, crude oil gathering lines and oil products lines, for the nation as well as by state and by pipe diameter. It characterizes the efficiency of typical pipelines of various diameters operating at capacity. Ancillary results include estimates of oil movements by state and by diameter and approximate pipeline capacity utilization nationwide.

  2. Global energy consumption for direct water use

    Science.gov (United States)

    Liu, Y.; Hejazi, M. I.; Kim, S. H.; Kyle, P.; Davies, E. G.; Miralles, D. G.; Teuling, R.; He, Y.; Niyogi, D.

    2015-12-01

    Despite significant efforts to quantify the mutual inter-dependence of the water and energy sectors, global energy for water (EFW) remains poorly understood, resulting in biases in energy accounting that directly affect water and energy management and policy. We firstly evaluate the global energy consumption for direct water use from 1973 to 2012 with sectoral, regional and process-level details. Over the 40-year period, we detected multiple shifts in EFW by county and region. For example, we find that India, the Middle East and China have surpassed the United States as the three largest consumers of EFW since 2003, mostly because of rapid growth in groundwater-based irrigation, desalination, and industrial and municipal water use, respectively. Globally, EFW accounts for 1-3% of total primary energy consumption in 2010, of which 52% is surface water, 36% is groundwater, and 12% is non-fresh water. The sectoral allocation of EFW includes municipal (45%), industrial (29%), and agricultural use (26%), and process-level contributions are from source/conveyance (41%), water purification (19%), water distribution (13%) and wastewater treatment (22%). Our evaluation suggests that the EFW may increase in importance in the future due to growth in population and income, and depletion of surface and shallow aquifer water resources in water-scarce regions. We are incorporating this element into an integrated assessment model (IAM) and linking it back to energy balance within that IAM. By doing this, we will then explore the impacts of EFW on the global energy market (e.g., changes in the share of groundwater use and desalination), and the uncertainty of future EFW under different shared social pathway (SSP) and representative concentration pathway (RCP) scenarios, and consequences on the emission of greenhouse gases as well. We expect these EFW induced impacts will be considerable, and will then have significant implications for adaptive management and policy making.

  3. Energy Consumption Forecasting for University Sector Buildings

    Directory of Open Access Journals (Sweden)

    Khuram Pervez Amber

    2017-10-01

    Full Text Available Reliable energy forecasting helps managers to prepare future budgets for their buildings. Therefore, a simple, easier, less time consuming and reliable forecasting model which could be used for different types of buildings is desired. In this paper, we have presented a forecasting model based on five years of real data sets for one dependent variable (the daily electricity consumption and six explanatory variables (ambient temperature, solar radiation, relative humidity, wind speed, weekday index and building type. A single mathematical equation for forecasting daily electricity usage of university buildings has been developed using the Multiple Regression (MR technique. Data of two such buildings, located at the Southwark Campus of London South Bank University in London, have been used for this study. The predicted test results of MR model are examined and judged against real electricity consumption data of both buildings for year 2011. The results demonstrate that out of six explanatory variables, three variables; surrounding temperature, weekday index and building type have significant influence on buildings energy consumption. The results of this model are associated with a Normalized Root Mean Square Error (NRMSE of 12% for the administrative building and 13% for the academic building. Finally, some limitations of this study have also been discussed.

  4. Motivating sustainable energy consumption in the home

    Energy Technology Data Exchange (ETDEWEB)

    He, H.A.; Greenberg, S. [Calgary Univ., AB (Canada). Dept. of Computer Science

    2009-07-01

    This paper discussed social motivations related to household energy conservation. The aim of the study was to explore how technology can be designed and used in the home to encourage sustainable energy use. The basic techniques used to motivate sustainable energy action included behaviour change techniques; information techniques; positive motivational techniques; and coercive motivational techniques. The psychological theories used in the study included cognitive dissonance as a means of reminding people of the inconsistency of their attitudes towards energy and their behaviour, and utility theory as a means of determining personal motivations for energy conservation. The study showed that people are more motivated to act when presented with personalized information and monetary losses as opposed to monetary gain. Social value orientation and self-reflection motivations were also considered. The study showed that pro-social orientation can be used in the form of ambient displays located in public areas of the home. Self-reflection can be encouraged by allowing family members to annotate visualizations containing a history of their energy consumption data. Results of the study will be used to design actual feedback visualizations of energy use. 18 refs.

  5. Renewable energy consumption and unemployment in South Africa

    OpenAIRE

    Moyo, Clement; Dingela, Siyasanga; Kolisi, Nwabisa; Khobai, Hlalefang; Anyikwa, Izunna

    2017-01-01

    The importance of renewable energy consumption has grown to a large extent over the recent years. The benefits of renewable energy consumption ranging from improved environmental quality to higher economic growth are well documented. However, the impact of renewable energy consumption on unemployment has received relatively less attention. This study examines the relationship between renewable energy consumption and unemployment in South Africa over the period 1990-2014. The Autoregressive Di...

  6. A survey of energy drink consumption patterns among college students

    OpenAIRE

    Carpenter-Aeby Tracy; Overton Reginald F; Aeby Victor G; Malinauskas Brenda M; Barber-Heidal Kimberly

    2007-01-01

    Abstract Background Energy drink consumption has continued to gain in popularity since the 1997 debut of Red Bull, the current leader in the energy drink market. Although energy drinks are targeted to young adult consumers, there has been little research regarding energy drink consumption patterns among college students in the United States. The purpose of this study was to determine energy drink consumption patterns among college students, prevalence and frequency of energy drink use for six...

  7. Understanding change and continuity in residential energy consumption

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2011-01-01

    of material consumer goods in practice theory. Case studies on household energy consumption are used as an empirical basis for these discussions. Looking at household energy consumption through the theoretical lens of practice theory necessitates discussion on whether energy consumption should be viewed...... from affecting) other related consumer practices, whether through reflexivity, routines or the materiality of consumer goods....

  8. Energy drink consumption and marketing in South Africa.

    Science.gov (United States)

    Stacey, Nicholas; van Walbeek, Corné; Maboshe, Mashekwa; Tugendhaft, Aviva; Hofman, Karen

    2017-12-01

    Energy drinks are a fast-growing class of beverage containing high levels of caffeine and sugar. Advertising and marketing have been key to their growth in South Africa. This paper documents trends in energy drink consumption and energy drink advertising, and examines the relationship between exposure to energy drink advertising and consumption. Logistic regressions were estimated of categories of energy drink consumption on individual characteristics, as well as exposure to energy drink advertising. Exposure to advertising is measured by reported viewing of channels high in energy drink advertising. Energy drink consumption in South Africa is higher among younger, wealthier males. Spending on energy drink advertising is mostly focused on television. Targeted channels include youth, sports and general interest channels. Viewers of channels targeted by energy drink advertisers have higher odds of any and moderate levels of energy drinks consumption. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Electric energy consumption in the cotton textile processing stages

    Energy Technology Data Exchange (ETDEWEB)

    Palamutcu, S. [Textile Engineering Department, Pamukkale University, Engineering Faculty, 20070 Kinikli, Denizli (Turkey)

    2010-07-15

    Electric energy is one of the primary energy sources consumpted in cotton textile processing. Current energy cost rate is reported about 8-10% in the total production cost of an ordinary textile product manufactured in Turkey. Significantly important share of this energy cost is electric energy. The aim of this paper was to investigate unit electric energy consumption of cotton textile processing stages using real-time measurements method. Actual and estimated Specific Energy Consumption (SEC) values for electric energy was calculated in the cotton textile processing stages of spinning, warping-sizing, weaving, wet processing and clothing manufacturing. Actual electric energy consumption data are gathered from monthly records of the involved plant managements. Estimated electric energy consumption data is gathered through on-site measurement. Actual and estimated electric energy consumption data and monthly production quantities of the corresponding months are used to facilitate specific electric energy consumption of the plants. It is found that actual electric energy consumption amount per unit textile product is higher than the estimated electric energy consumption amount per unit textile product of each involved textile processing stages. (author)

  10. Improved immunization strategy to reduce energy consumption on nodes traffic

    Science.gov (United States)

    Yuan, Jiazheng; Zhao, Dongyan; Long, Keping; Zheng, Yongrong

    2017-04-01

    The increasing requirement of transmission network sizes would result in huge energy consumption with communication traffic. Green communication technologies are expected to help in reducing energy consumption impact to environment. Therefore, it is important to design energy-efficient strategy that can decrease energy consumption. This paper proposes to use the acquaintance and improved targeted immunization strategies from complex systems to resolve energy consumption issues and uses traffic as measure standard to obtain a stable threshold. The simulation results show that the improved control strategy is better and more effective to save as much energy as possible.

  11. A framework for characterising energy consumption of machining manufacturing systems

    OpenAIRE

    Li, Yufeng; He, Yan; Wang, Yan; Yan, Ping; Liu, Xuehui

    2013-01-01

    Energy consumption in machining manufacturing systems is increasingly of interest due to concern for global climate change and manufacturing sustainability. To utilise energy more effectively, it is paramount to understand and characterise the energy consumption of machining manufacturing systems. To this end, a framework to analyse energy consumption characteristics in machining manufacturing systems from a holistic point of view is proposed in this paper. Taking into account the complexity ...

  12. Revising China's energy consumption and carbon emissions

    Science.gov (United States)

    Liu, Z.

    2015-12-01

    China is the world's largest carbon emitter and takes the lion's share of new increased emission since 2000, China's carbon emissions and mitigation efforts have received global attentions (Liu et al., Nature 500, 143-145)1. Yet China's emission estimates have been approved to be greatly uncertain (Guan et al., Nature Climate Change 2, 672-675)2. Accurate estimation becomes even crucial as China has recently pledged to reach a carbon emission peak by 2030, but no quantitative target has been given, nor is it even possible to assess without a reasonable baseline. Here we produced new estimates of Chinese carbon emissions for 1950-2012 based on a new investigation in energy consumption activities and emission factors using extensively surveyed and experimental data from 4243 mines and 602 coal samples. We reported that the total energy consumption is 10% higher than the nationally published value. The investigated emission factors used in China are significantly (40%) different from the IPCC default values which were used in drawing up several previous emission inventories. The final calculated total carbon emissions from China are 10% different than the amount reported by international data sets. The new estimate provides a revision of 4% of global emissions, which could have important implications for global carbon budgets and burden-sharing of climate change mitigation. 1 Liu, Z. et al. A low-carbon road map for China. Nature 500, 143-145 (2013). 2 Guan, D., Liu, Z., Geng, Y., Lindner, S. & Hubacek, K. The gigatonne gap in China's carbon dioxide inventories. Nature Climate Change, 672-675 (2012).

  13. {epsilon}-Caprolactam migration from irradiated PA-6 food packaging: kinetic simulation and measurement

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Faena Machado Leite [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Felix, Juliana; Araujo, Henrique Peres; Monteiro, Magali [UNESP, Araraquara, SP (Brazil). Faculdade de Ciencias Farmaceuticas. Dept. de Alimentos e Nutricao; Padula, Marisa [Instituto de Tecnologia de Alimentos (ITAL), Campinas, SP (Brazil). Centro de Tecnologia de Embalagem; Manzoli, Jose Eduardo [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Universidade Sao Judas Tadeu (USJT), Sao Paulo, SP (Brazil)], E-mail: jmanzoli@ipen.br

    2007-07-01

    Migration of low molecular mass compounds (LMMC), such as monomers and additives, from plastic packaging into food simulants is a very important issue, concerning public health and chemical contamination of foods. Sterilization of food packaging materials with ionizing radiation is considered an alternative to other sterilization methods, but when polymers are irradiated, LMMC may be formed, as radiolysis products. According to the Brazilian legislation, specific migration tests, such as those of LMMC from packaging into simulants, should be carried out at certain temperature and time, depending on the real conditions of contact. In this work, multilayer flexible films with polyamide 6 (PA-6), used for meat foodstuffs, were studied. The {epsilon}-caprolactam (PA-6 monomer) specific migration into acetic acid 3% simulant at 40 deg C during 10 days and at 100 deg C during 30 minutes was performed. The initial monomer level in the irradiated and non irradiated PA-6 films was quantified by high resolution gas chromatography (HRGC). Radiation doses were 3 and 7 kGy. {epsilon}-caprolactam specific migration was carried out only with non irradiated films. The results showed that radiation causes a significant change in the monomer level, up or down, depending on the multilayer film type. The kinetic of the {epsilon}-caprolactam migration at both temperatures, 40 and 100 deg C was clearly explained by the numerical simulation, combining an Arrhenius equation with the Fick's second law, although this kinetic was not experimentally studied. This simulation allowed to predict diffusion parameters estimates, like diffusion coefficients and activation energies of {epsilon}-caprolactam in the films or simulant. (author)

  14. Blends of caprolactam/caprolactone copolymers and chlorinated polymers

    NARCIS (Netherlands)

    Alberda van Ekenstein, G.O.R.; Deuring, H.; ten Brinke, G.; Ellis, T.S.

    The phase behaviour of blends of chlorinated polyethylene, polyvinyl chloride (PVC) and chlorinated PVC with random copolymers of caprolactone and caprolactam has been investigated and the results correlated with a binary interaction model. The known miscibility of polycaprolactone in the

  15. Energy consumption in the production of cellulose and paper

    Energy Technology Data Exchange (ETDEWEB)

    Kubelka, V.

    1979-01-01

    The specific consumption of energy in the cellulose and paper industry of Czechoslovakia is 20% higher than in Austria and the Federal Republic of Germany. For the last 20 years, the specific consumption of fuel decreased by 29% in the Austrian cellulose and paper industry, while the consumption of electricity increased by 16%. The possibility for decreasing the specific consumption of energy in Czechoslovakia by burning by-products, heat recovery, equipment modernization, etc. are examined.

  16. Managing Energy Resources: Case Study on Energy Consumption Pattern

    Directory of Open Access Journals (Sweden)

    Sunday IBRAHIM

    2012-11-01

    Full Text Available An assessment of the available sources of energy in selected rural areas of Benue State, Nigeria was undertaken with a view to evaluate their consumption pattern. Systematic random sampling was used to sample 144 households. Well structured questionnaire and measuring equipments were used to obtain our data. The analysis on age, energy resources in the selected areas and consumption pattern were based on descriptive statistics. Analysis to determine effect of income and household size on quantities of fuel usage was done using models of regression and analysis of variance (ANOVA. The findings revealed that 92.4 % of the respondents were above 50 years old on average and about 37 % had a household size of 11 members. The rural populace rely more on fuel wood as their sources of energy. The estimated average daily fuel wood and kerosene consumption per household ranged between 9–20 kg and 0.02 - 0.1 litres respectively. The average annual income of the respondents range between 270 – 800 US dollar (#40,000 - #120,000 Nigeria currency, which shows that majority of these rural populace lives below poverty line. The correlation coefficients between household size and quantities of fuel wood and kerosene consumed by respondents are 0.914 and 0.812 respectively so their relationships are statistically significant at 5 % probability level. Relationships between their household income and quantities of kerosene and fuel wood used have correlation coefficients of 0.107 and 0.109 respectively, which are not statistically significant at 5 % probability level. Solar energy systems need be developed for use in the rural areas for efficient resources management and utilization.

  17. Energy consumption of personal computer workstations

    Energy Technology Data Exchange (ETDEWEB)

    Szydlowski, R.F.; Chvala, W.D. Jr.

    1994-02-01

    The explosive growth of the information age has had a profound effect on the appearance of today`s office. Although the telephone still remains an important part of the information exchange and processing system within an office, other electronic devices are now considered required equipment within this environment. This office automation equipment includes facsimile machines, photocopiers, personal computers, printers, modems, and other peripherals. A recent estimate of the installed base indicated that 42 million personal computers and 7.3 million printers are in place, consuming 18.2 billion kWh/yr-and this installed base is growing (Luhn 1992). From a productivity standpoint, it can be argued that this equipment greatly improves the efficiency of those working in the office. But of primary concern to energy system designers, building managers, and electric utilities is the fact that this equipment requires electric energy. Although the impact of each incremental piece of equipment is small, installation of thousands of devices per building has resulted in office automation equipment becoming the major contributor to electric consumption and demand growth in commercial buildings. Personal computers and associated equipment are the dominant part of office automation equipment. In some cases, this electric demand growth has caused office buildings electric and cooling systems to overload.

  18. Efficiency in energy production and consumption

    Science.gov (United States)

    Kellogg, Ryan Mayer

    This dissertation deals with economic efficiency in the energy industry and consists of three parts. The first examines how joint experience between pairs of firms working together in oil and gas drilling improves productivity. Part two asks whether oil producers time their drilling optimally by taking real options effects into consideration. Finally, I investigate the efficiency with which energy is consumed, asking whether extending Daylight Saving Time (DST) reduces electricity use. The chapter "Learning by Drilling: Inter-Firm Learning and Relationship Persistence in the Texas Oilpatch" examines how oil production companies and the drilling rigs they hire improve drilling productivity by learning through joint experience. I find that the joint productivity of a lead firm and its drilling contractor is enhanced significantly as they accumulate experience working together. Moreover, this result is robust to other relationship specificities and standard firm-specific learning-by-doing effects. The second chapter, "Drill Now or Drill Later: The Effect of Expected Volatility on Investment," investigates the extent to which firms' drilling behavior accords with a key prescription of real options theory: irreversible investments such as drilling should be deferred when the expected volatility of the investments' payoffs increases. I combine detailed data on oil drilling with expectations of future oil price volatility that I derive from the NYMEX futures options market. Conditioning on expected price levels, I find that oil production companies significantly reduce the number of wells they drill when expected price volatility is high. I conclude with "Daylight Time and Energy: Evidence from an Australian Experiment," co-authored with Hendrik Wolff. This chapter assesses DST's impact on electricity demand using a quasi-experiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. We show that the extension did not reduce overall

  19. Quantification model for energy consumption in edification

    Directory of Open Access Journals (Sweden)

    Mercader, Mª P.

    2012-12-01

    Full Text Available The research conducted in this paper focuses on the generation of a model for the quantification of energy consumption in building. This is to be done through one of the most relevant environmental impact indicators associated with weight per m2 of construction, as well as the energy consumption resulting from the manufacturing process of materials used in building construction. The practical application of the proposed model on different buildings typologies in Seville, will provide information regarding the building materials, the subsystems and the most relevant construction elements. Hence, we will be able to observe the impact the built surface has on the environment. The results obtained aim to reference the scientific community, providing quantitative data comparable to other types of buildings and geographical areas. Furthermore, it may also allow the analysis and the characterization of feasible solutions to reduce the environmental impact generated by the different materials, subsystems and construction elements commonly used in the different building types defined in this study.

    La investigación realizada en el presente trabajo plantea la generación de un modelo de cuantificación del consumo energético en edificación, a través de uno de los indicadores de impacto ambiental más relevantes asociados al peso por m2 de construcción, el consumo energético derivado del proceso de fabricación de los materiales de construcción empleados en edificación. La aplicación práctica del modelo propuesto sobre diferentes tipologías edificatorias en Sevilla aportará información respecto a los materiales de construcción, subsistemas y elementos constructivos más impactantes, permitiendo visualizar la influencia que presenta la superficie construida en cuanto al impacto ambiental generado. Los resultados obtenidos pretenden servir de referencia a la comunidad científica, aportando datos num

  20. Energy consumption in commercial buildings: A comparison with BEPS budgets

    Science.gov (United States)

    1980-09-01

    Metered energy consumption data were collected on existing commercial buildings to help establish the proposed building energy performance standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20 percent above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

  1. Analysis of a Residential Building Energy Consumption Demand Model

    Directory of Open Access Journals (Sweden)

    Meng Liu

    2011-03-01

    Full Text Available In order to estimate the energy consumption demand of residential buildings, this paper first discusses the status and shortcomings of current domestic energy consumption models. Then it proposes and develops a residential building energy consumption demand model based on a back propagation (BP neural network model. After that, taking residential buildings in Chongqing (P.R. China as an example, 16 energy consumption indicators are introduced as characteristics of the residential buildings in Chongqing. The index system of the BP neutral network prediction model is established and the multi-factorial BP neural network prediction model of Chongqing residential building energy consumption is developed using the Cshap language, based on the SQL server 2005 platform. The results obtained by applying the model in Chongqing are in good agreement with actual ones. In addition, the model provides corresponding approximate data by taking into account the potential energy structure adjustments and relevant energy policy regulations.

  2. Habit formation and consumption of energy for heating

    DEFF Research Database (Denmark)

    Leth-Petersen, Søren

    2007-01-01

    In this paper we ask if consumption of energy for space heating by households is habit forming. A model of intertemporal consumption allocation allowing for habit-forming preferences is estimated on a register-based panel data set with high quality information about consumption of natural gas...... for a sample of Danish households. Results indicate that preferences are weakly habit forming...

  3. Specific energy consumption of membrane bioreactor (MBR) for sewage treatment.

    Science.gov (United States)

    Krzeminski, Pawel; van der Graaf, Jaap H J M; van Lier, Jules B

    2012-01-01

    This paper provides an overview of current electric energy consumption of full-scale municipal MBR installations based on literature review and case studies. Energy requirements of several MBRs were linked to operational parameters and reactor performance. Total and specific energy consumption data were analysed on a long-term basis with special attention given to treated flow, design capacity, membrane area and effluent quality. The specific energy consumption of an MBR system is dependent on many factors, such as system design and layout, volume of treated flow, membrane utilization and operational strategy. Operation at optimal flow conditions results in a low specific energy consumption and energy efficient process. Energy consumption of membrane related modules was in the range of 0.5-0.7 kWh/m(3) and specific energy consumption for membrane aeration in flat sheet (FS) was 33-37% higher than in a hollow fibre (HF) system. Aeration is a major energy consumer, often exceeding 50% share of total energy consumption. In consequence, coarse bubble aeration applied for continuous membrane cleaning remains the main target for energy saving actions. Also, a certain potential for energy optimization without immediate danger of affecting the quality of the produced effluent was observed.

  4. Energy Consumption Series: Assessment of energy use in multibuilding facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    This study originally had two primary objectives: (1) to improve EIA`s estimates of district heat consumption for commercial buildings in the CBECS sample that lacked individual metering and (2) to provide a basis for estimating primary fuel consumption by central plants serving commercial buildings. These objectives were expanded to include additional questions relating to these central plants. Background information is provided on the CBECS and on district heating and cooling, which is the most important type of energy-related service provided by multibuilding facilities with central physical plants. Chapters 2 and 3 present data results on multibuilding facilities from the 1989 CBECS and the pilot Facility Survey. Chapter 2 presents the characteristics of multibuilding facilities and the individual buildings located on these facilities. Chapter 3 provides estimates of energy inputs and outputs of multibuilding facilities with central physical plants. Chapter 4 assesses the quality of the pilot Facility Survey and includes recommendations for future work in this area. The appendices provide more detailed information on the Facility Survey itself, in particular the limitations on the use of these results. Appendix B, ``Data Quality``, provides detailed information relating to the limitations of the data and the conclusions presented in this report. As a pilot study, the 1989 Facility Survey has some serious flaws and limitations which are recognized in this report.

  5. Consumption of energy drinks among physical education students

    OpenAIRE

    Ballistreri,Martha Carmen; Corradi-Webster,Clarissa Mendonça

    2008-01-01

    This descriptive and cross-sectional study aimed to characterize the pattern of energy drinks consumption in a sample of physical education students through a self-applied questionnaire (socio-demographic data and characterization of consumption). Variables associated with consumption: gender, marital status, attending gym classes, athletic swim practice, and study in the morning. Consumption pattern (n=137): 2.2% once in their lives, 9.5% at least once in the last 12 months, 38% at least onc...

  6. Quantification of Uncertainty in Predicting Building Energy Consumption

    DEFF Research Database (Denmark)

    Brohus, Henrik; Frier, Christian; Heiselberg, Per

    2012-01-01

    Traditional building energy consumption calculation methods are characterised by rough approaches providing approximate figures with high and unknown levels of uncertainty. Lack of reliable energy resources and increasing concerns about climate change call for improved predictive tools. A new...... approach for the prediction of building energy consumption is presented. The approach quantifies the uncertainty of building energy consumption by means of stochastic differential equations. The approach is applied to a general heat balance for an arbitrary number of loads and zones in a building...... for the dynamic thermal behaviour of buildings. However, for air flow and energy consumption it is found to be much more significant due to less “damping”. Probabilistic methods establish a new approach to the prediction of building energy consumption, enabling designers to include stochastic parameters like...

  7. A Case of Acute Psychosis Following Energy Drink Consumption.

    Science.gov (United States)

    Görgülü, Yasemin; Taşdelen, Öznur; Sönmez, Mehmet Bülent; Köse Çinar, Rugül

    2014-03-01

    Interest in energy drinks is increasing every day. Energy drink consumption is increasing proportionally. Users often utilize these drinks in order to enjoy, have fun and to increase performance and attention. However, consumption of the energy drinks sometimes may also cause adverse physical and psychological consequences. Unwanted physical results are in the more foreground, noticeable and visible but the data about psychological problems caused by energy drinks is accumulated over the years in the literature. In this case report, we describe the case of a young man with no psychiatric history who was hospitalized for psychotic symptoms following excessive consumption of energy drinks.

  8. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate consumpt...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  9. Danish Sector Guide for Calculation of the Actual Energy Consumption

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard

    2016-01-01

    , the innovation network for sustainable construction, InnoBYG started work on a Danish sector guide for the calculation of actual energy consumption in relation to upgrading of buildings. The focus was to make a common guide for energy calculations that can be used by consultants performing calculations...... consumption compared with the estimated energy demand by calculation. The paper concludes that the result of an energy calculation should not be given as a single figure but rather as a spread between the best and worst case for the assumed conditions. Finally, a brief update on current actions is given...... related to the sector guide for calculation of actual energy consumption. Keywords – Energy calculations, actual energy consumption, energy perfomance...

  10. PARADOX OF ALTERNATIVE ENERGY CONSUMPTION: LEAN OR PROFLIGACY?

    Directory of Open Access Journals (Sweden)

    Eliza Safina

    2017-12-01

    Full Text Available Consumption of alternative energy resources is conventionally considered as an implement of lean management, main target of which is use of renewable (in terms of exhaustibility energy resources. However, when it comes to actual consumption of alternative energy resources, the contradiction is arisen between , the caused need of economy of non-renewable energy resources and rational environmental management and "providence" which is caused by cost reduction of energy consumption. What is the factual providence, how substantial is the dilemma between environmental friendliness and cost effectiveness in matters of energy savings, what is the significance of alternative energy consumption in countries with different economic types, what should balanced solution in energy mentioned issues are contemplated in current article.

  11. Contact configuration and energy consumption in spinal cord stimulation

    NARCIS (Netherlands)

    de Vos, Cecilia Cecilia Clementine; Hilgerink, M.P.; Buschman, H.P.J.; Holsheimer, J.; Vander Sloten, Jos; Verdonck, Pascal; Nyssen, Marc; Haueisen, Jens

    2009-01-01

    Objective: To test the hypothesis that, in contrast to an increase of the number of anodes which reduces energy consumption per pulse, an increase of the number of cathodes raises the energy consumption. Materials and Methods: Patients with an Itrel 3 Pulse Generator and a Pisces Quad quadripolar

  12. Aggregate Energy Consumption and Sectoral Output in Nigeria ...

    African Journals Online (AJOL)

    First Lady

    2012-10-27

    Oct 27, 2012 ... Journal of Energy and Development, 3, 401-403. Liew, V. K., Nathan, T. M. and Wong, W. (2012) Are Sectoral Outputs in. Pakistan Led by energy Consumption? Economic Bulletin, 32(3), pp. 2326-2331. Narayan, P. K. and Singh, B. (2007). The Electricity Consumption and GDP. Nexus for the Fiji Islands.

  13. Low-energy-consumption hybrid lasers for silicon photonics

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Ran, Qijiang; Mørk, Jesper

    2012-01-01

    Physics and characteristics of a hybrid vertical-cavity laser that can be an on-chip Si light source with high speed and low energy consumption are discussed.......Physics and characteristics of a hybrid vertical-cavity laser that can be an on-chip Si light source with high speed and low energy consumption are discussed....

  14. Optimal Energy Consumption Analysis of Natural Gas Pipeline

    Science.gov (United States)

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent. PMID:24955410

  15. 10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

    Science.gov (United States)

    2010-01-01

    ... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... of energy consumption and water consumption of automatic commercial ice makers. (a) Scope. This.../100 lbs ice). (b) Testing and Calculations. Determine the energy consumed and the condenser water use...

  16. Optimal Energy Consumption Analysis of Natural Gas Pipeline

    OpenAIRE

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. There...

  17. Potential reduction of energy consumption in public university library

    Science.gov (United States)

    Noranai, Z.; Azman, ADF

    2017-09-01

    Efficient electrical energy usage has been recognized as one of the important factor to reduce cost of electrical energy consumption. Various parties have been emphasized about the importance of using electrical energy efficiently. Inefficient usage of electrical energy usage lead to biggest factor increasing of administration cost in Universiti Tun Hussein Onn Malaysia. With this in view, a project the investigate potential reduction electrical energy consumption in Universiti Tun Hussein Onn Malaysia was carried out. In this project, a case study involving electrical energy consumption of Perpustakaan Tunku Tun Aminah was conducted. The scopes of this project are to identify energy consumption in selected building and to find the factors that contributing to wastage of electrical energy. The MS1525:2001, Malaysian Standard - Code of practice on energy efficiency and use of renewable energy for non-residential buildings was used as reference. From the result, 4 saving measure had been proposed which is change type of the lamp, install sensor, decrease the number of lamp and improve shading coefficient on glass. This saving measure is suggested to improve the efficiency of electrical energy consumption. Improve of human behaviour toward saving energy measure can reduce 10% from the total of saving cost while on building technical measure can reduce 90% from total saving cost.

  18. Energy consumption in the Danish fishery

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    2004-01-01

    Previous studies based on life-cycle assessment (LCA) in Denmark and Sweden have shown that the fishery is the environmental "hot spot" in the life cycle of certain fish products. Within the fishery, fuel consumption is one of the most important factors addressed by LCA. The present study reveals...... that there are great differences in fuel consumption between fisheries targeting groundfish or shellfish and those targeting pelagic fish or industrial fish. Here, I show that fuel consumption per kilogram of caught fish varies considerably as a function of fishing gear and vessel size, even considering the same...... target species. I argue that these differences need to be addressed in the search for a fuel-efficient fishery. Improvements in fuel efficiency may be consistent with other objectives, such as reduced impacts on seafloor habitats and reduced discard Previous studies based on life-cycle assessment (LCA...

  19. Energy drinks consumption in male construction workers, Chonburi province.

    Science.gov (United States)

    Pichainarong, Natchaporn; Chaveepojnkamjorn, Wisit; Khobjit, Pattama; Veerachai, Viroj; Sujirarat, Dusit

    2004-12-01

    This unmatched case-control study aimed to determine the relationship among caffeine drinks consumption known as "energy drinks consumption", drug dependence and related factors in male construction workers in Chonburi Province. It was conducted during December 15, 2001 and February 15, 2002. Data were collected using interview questionnaires. The logistic regression was used to control possible confounding factors. The subjects consisted of 186 cases who had consumed energy drinks for more than 3 months and 186 controls who had given up for more than 3 months. They were frequency/group matched by age group. There was statistically significant association among energy drinks consumption and overtime work, motivation from advertisements, positive attitude of energy drinks consumption, alcohol drinks, smoking and ex-taking Kratom behavior. Multivariate analyses revealed that only 5 factors were related to energy drinks consumption: marital status (OR = 1.88, 95%CI: 1.14, 3.11), overtime work (OR = 2.84, 95%CI: 1.73, 4.64), motivation from advertisements (OR = 2.72, 95%CI: 1.67, 4.42), positive attitude of energy drinks consumption (OR = 4.06, 95%CI: 1.65, 10.01) and ex-taking Kratom behavior (OR = 2.77, 95%CI: 1.19, 6.44). As a result, construction workers should be provided with the knowledge of energy drinks consumption, the effect of drug dependence behavior, and the advantages of safe and healthy food that is cheap, readily available, and rich in nutrients.

  20. Modelling energy consumption in a manufacturing plant using productivity KPIs

    Energy Technology Data Exchange (ETDEWEB)

    Gallachoir, Brian O.; Cahill, Caiman (Sustainable Energy Research Group, Dept. of Civil and Environmental Engineering, Univ. College Cork (Ireland))

    2009-07-01

    Energy efficiency initiatives in industrial plants are often focused on getting energy-consuming utilities and devices to operate more efficiently, or on conserving energy. While such device-oriented energy efficiency measures can achieve considerable savings, greater energy efficiency improvement may be achieved by improving the overall productivity and quality of manufacturing processes. The paper highlights the observed relationship between productivity and energy efficiency using aggregated data on unit consumption and production index data for Irish industry. Past studies have developed simple top-down models of final energy consumption in manufacturing plants using energy consumption and production output figures, but these models do not help identify opportunities for energy savings that could achieved through increased productivity. This paper proposes an improved and innovative method of modelling plant final energy demand that introduces standard productivity Key Performance Indicators (KPIs) into the model. The model demonstrates the relationship between energy consumption and productivity, and uses standard productivity metrics to identify the areas of manufacturing activity that offer the most potential for improved energy efficiency. The model provides a means of comparing the effect of device-oriented energy efficiency measures with the potential for improved energy efficiency through increased productivity.

  1. Annual Energy Consumption Forecasting Based on PSOCA-GRNN Model

    Directory of Open Access Journals (Sweden)

    Huiru Zhao

    2014-01-01

    Full Text Available Accurate energy consumption forecasting can provide reliable guidance for energy planners and policy makers, which can also recognize the economic and industrial development trends of a country. In this paper, a hybrid PSOCA-GRNN model was proposed for the annual energy consumption forecasting. The generalized regression neural network (GRNN model was employed to forecast the annual energy consumption due to its good ability of dealing with the nonlinear problems. Meanwhile, the spread parameter of GRNN model was automatically determined by PSOCA algorithm (the combination of particle swarm optimization algorithm and cultural algorithm. Taking China’s annual energy consumption as the empirical example, the effectiveness of this proposed PSOCA-GRNN model was proved. The calculation result shows that this proposed hybrid model outperforms the single GRNN model, GRNN model optimized by PSO (PSO-GRNN, discrete grey model (DGM (1, 1, and ordinary least squares linear regression (OLS_LR model.

  2. Monitoring and optimization of energy consumption of base transceiver stations

    CERN Document Server

    Spagnuolo, Antonio; Vetromile, Carmela; Formosi, Roberto; Lubritto, Carmine

    2015-01-01

    The growth and development of the mobile phone network has led to an increased demand for energy by the telecommunications sector, with a noticeable impact on the environment. Monitoring of energy consumption is a great tool for understanding how to better manage this consumption and find the best strategy to adopt in order to maximize reduction of unnecessary usage of electricity. This paper reports on a monitoring campaign performed on six Base Transceiver Stations (BSs) located central Italy, with different technology, typology and technical characteristics. The study focuses on monitoring energy consumption and environmental parameters (temperature, noise, and global radiation), linking energy consumption with the load of telephone traffic and with the air conditioning functions used to cool the transmission equipment. Moreover, using experimental data collected, it is shown, with a Monte Carlo simulation based on power saving features, how the BS monitored could save energy.

  3. THE INFLUENCE OF AN APARTMENT POSITIONING ON ENERGY CONSUMPTION

    Directory of Open Access Journals (Sweden)

    Marcela PRADA

    2013-06-01

    Full Text Available This work is part of the highly topical subject of global warming and energy conservation. The article contains parametric studies of energy consumption and CO² emissions for an apartment located in a block of flats, depending on its location. It was studied the energy consumption of an apartment having different cardinal orientations in the same building and of an apartment with the same position inside the building but located in different climatic zones. The case studies show the difference between the energy consumption of an apartment depending on its position, thus resulting in a few general directions for their heat insulation, so that the specific energy consumption of the apartment is below 100 kWh/m² year.

  4. Economic energy distribution and consumption in a microgrid Part 2

    DEFF Research Database (Denmark)

    Tahersima, Fatemeh; Stoustrup, Jakob; Andersen, Palle

    2014-01-01

    Energy management of a small scale electrical microgrid is investigated. The microgrid comprises residential houses with local renewable generation, consumption and storage units. The microgrid has the possibility of connection to the electricity grid as well to compensate energy decit of local...... power producers. The nal objective is to full the microgrid's energy demands mainly from the local electricity producers. The other objective is to manage power consumption such that the consumption cost is minimum for individual households. In this study, a hierarchical controller composed of three...... levels is proposed. Each layer from bottom to top focus on individual energy consuming units, individual buildings, and the microgrid respectively. At the middle layer, a model predictive controller is formulated to schedule the building's energy consumption using potential load exibilities. The top...

  5. Energy consumption in the food supply system

    DEFF Research Database (Denmark)

    Kamp, Andreas; Østergård, Hanne; Hauggaard-Nielsen, Henrik

    2016-01-01

    . As the energy sector increasingly bases energy supply on renewable sources, the energy requirements of the food sector will automatically substitute renewable energy for non-renewable energy in all stages of food supply. In principle, the food sector does not need to change if renewable energy is sufficient......Historically, productivity gains have been possible by the application of energy intensive technologies. In the future, new technologies and practices based on energy from renewable resources are central for the development of our food supply system and they will contribute in two different ways...... and available as the energy carriers that we are used to today. We may think of this as passive adaptation. A passive adaptation strategy may support a development towards the image ‘high input – high output’. The food sector, however, may also actively adapt to a future without fossil fuels and change...

  6. Sector review of UK higher education energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Ian; Ogbonna, Anthony; Altan, Hasim [Building Energy Analysis Unit, School of Architecture, University of Sheffield, S10 2TN Sheffield (United Kingdom)

    2008-08-15

    The UK education and education-related services are said to be one of the fastest-growing export earners in recent years and are known to have had significant impacts at the micro- and macro-levels of the UK. This review looks at energy consumption of this fast growing sector. It concentrates on the energy consumption patterns of the funded higher education institutions in the UK. The findings indicate energy consumption in the sector has been on the increase in the 6 years up to 2006; rising by about 2.7% above the 2001 consumption levels. This increase is, however, not evenly spread across the entire sector. The high energy-consuming institutions appear to be increasing their net consumption, relative to other institutions. Gross internal area, staff and research student full-time equivalent were found to have highest correlation with energy consumption across the sector and may be used as proxy indicators for energy consumption as well as the targets of interventions. (author)

  7. Disaggregated Energy Consumption and Economic Growth in Ghana

    Directory of Open Access Journals (Sweden)

    Paul Adjei Kwakwa

    2012-01-01

    Full Text Available This study has examined the causality between disaggregated energy consumption (electricity and fossil consumption and overall growth, agricultural and manufacturing growth in Ghana’s economy over the period 1971-2007. By employing the Augmented Dickey Fuller test all variables were found to be integrated of the order one and the Johansen test showed the presence of cointegration between the variables. The granger causality test for the study indicated a unidirectional causality from overall growth to electricity and fossil consumption; a unidirectional causality from agriculture to electricity consumption both in the short and long run; and a feedback relationship between manufacturing and electricity consumption. Energy seem not be an essential factor of production in the agricultural sector but important in the manufacturing sector therefore, it is recommended that efforts be geared towards ensuring a high supply of energy to the manufacturing sector in order to keep up its contribution to the economy.

  8. Reduced energy consumption for melting in foundries

    Energy Technology Data Exchange (ETDEWEB)

    Skov-Hansen, S.

    2007-09-15

    By improving the gating technology in traditional gating systems it is possible to reduce the amount of metal to be re-melted, and hence reduce the energy consumption for melting in foundries. Traditional gating systems are known for a straight tapered down runner a well base and 90 deg. bends in the runner system. In the streamlined gating systems there are no sharp changes in direction and a large effort is done to confine and control the flow of the molten metal during mould filling. Experiments in real production lines have proven that using streamlined gating systems improves yield by decreasing the poured weight compared to traditional layouts. In a layout for casting of valve housings in a vertically parted mould the weight of the gating system was reduced by 1,1kg which is a 20% weight reduction for the gating system. In a layout for horizontally parted moulds the weight of the gating system has been reduced by 3,7kg which is a weight reduction of 60% for the gating system. The experiments casting valve housings in ductile iron also proved that it is possible to lower the pouring temperature from 1400 deg. C to 1300 deg. C without the risk of cold runs. Glass plate fronted moulds have been used to study the flow of melt during mould filling. These experiments have also been used for studying the flow pattern when ceramic filters are used. The thorough study of the use of filters revealed that the metal passing through the filter is divided into a number of small jets. This proves that filters do not have the claimed positive effect on the flow of metal. The volumes necessary on either side of the filter is not filled till a backpressure is build up and results in formation of pressure shocks when backfilled. These pressure shocks result in more turbulence inside the casting than the same gating system with no filter. Not using filters can mean a reduction in poured weight of 0,6kg. To examine if the experiments using glass plate fronted moulds give

  9. Water consumption in the energy sector

    OpenAIRE

    Larsen, Morten Andreas Dahl; Drews, Martin; Gani, Rafiqul

    2016-01-01

    Energy, water, and food systems are closely interlinked in the Energy-Water-Food Nexus. Water is of paramount importance for the energy sector. Fossil fuels require water for extraction, trans-port and processing. Thermal power plants require water for cooling, whether they use nuclear, fossil or biofuels. Hydropower is based on water in rivers or reservoirs. Feedstock production for biofuels may depend on water for irrigation. On the other hand, energy is necessary for pumping of ground- and...

  10. Modeling Aggregate Hourly Energy Consumption in a Regional Building Stock

    Directory of Open Access Journals (Sweden)

    Anna Kipping

    2017-12-01

    Full Text Available Sound estimates of future heat and electricity demand with high temporal and spatial resolution are needed for energy system planning, grid design, and evaluating demand-side management options and polices on regional and national levels. In this study, smart meter data on electricity consumption in buildings are combined with cross-sectional building information to model hourly electricity consumption within the household and service sectors on a regional basis in Norway. The same modeling approach is applied to model aggregate hourly district heat consumption in three different consumer groups located in Oslo. A comparison of modeled and metered hourly energy consumption shows that hourly variations and aggregate consumption per county and year are reproduced well by the models. However, for some smaller regions, modeled annual electricity consumption is over- or underestimated by more than 20%. Our results indicate that the presented method is useful for modeling the current and future hourly energy consumption of a regional building stock, but that larger and more detailed training datasets are required to improve the models, and more detailed building stock statistics on regional level are needed to generate useful estimates on aggregate regional energy consumption.

  11. Water consumption in the energy sector

    DEFF Research Database (Denmark)

    Larsen, Morten Andreas Dahl; Drews, Martin; Gani, Rafiqul

    2016-01-01

    Energy, water, and food systems are closely interlinked in the Energy-Water-Food Nexus. Water is of paramount importance for the energy sector. Fossil fuels require water for extraction, trans-port and processing. Thermal power plants require water for cooling, whether they use nuclear, fossil...... or biofuels. Hydropower is based on water in rivers or reservoirs. Feedstock production for biofuels may depend on water for irrigation. On the other hand, energy is necessary for pumping of ground- and surface water, for water treatment as well as for transport and distribution of water to end......-users. The waste water is often returned to the environment after energy requiring waste water management....

  12. Energy consumption in the food supply system

    DEFF Research Database (Denmark)

    Kamp, Andreas; Østergård, Hanne; Hauggaard-Nielsen, Henrik

    2016-01-01

    Historically, productivity gains have been possible by the application of energy intensive technologies. In the future, new technologies and practices based on energy from renewable resources are central for the development of our food supply system and they will contribute in two different ways....... that the increasing world population and the increasing demand for resource intensive food and life style will require a strategy for the future food supply system centred on energy reduction.......Historically, productivity gains have been possible by the application of energy intensive technologies. In the future, new technologies and practices based on energy from renewable resources are central for the development of our food supply system and they will contribute in two different ways....... As the energy sector increasingly bases energy supply on renewable sources, the energy requirements of the food sector will automatically substitute renewable energy for non-renewable energy in all stages of food supply. In principle, the food sector does not need to change if renewable energy is sufficient...

  13. Pittsburgh 2013 Energy Baseline: Consumption, Trends & Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Tarka, Thomas J. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); James III, Robert E. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Withum, Jeffrey A. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Plowman, Brian [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Shih, Chung Yan [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2017-03-01

    The United States (U.S.) Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) are working in conjunction with the City of Pittsburgh (City) to transform how energy is produced, transported, and consumed in the City. This transformation will rely on 21st Century Energy Infrastructure designs, which leverage advanced technology and design techniques to modernize energy infrastructure, create new business models and markets, and expand technology research and development opportunities. Achieving this vision will require developing solutions that are unique to the City: its climate, topography, energy needs, resources, and existing infrastructure.a In this way, the City will demonstrate what the American “City of the Future” looks like, with all its attendant environmental, economic, and job-creation benefits. It will also serve as a template for other cities seeking to reinvent their energy systems.

  14. On-site energy consumption at softwood sawmills in Montana

    Science.gov (United States)

    Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

    2016-01-01

    Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis...

  15. Minimizing energy consumption of accelerators and storage ring facilities

    Energy Technology Data Exchange (ETDEWEB)

    Barton, M. Q.; Gerke, H.; Loew, G. A.; Lundy, R. A.; Schnell, W.

    1980-01-01

    The discussion of energy usage falls naturally into three parts. The first is a review of what the problem is, the second is a description of steps that can be taken to conserve energy at existing facilities, and the third is a review of the implications of energy consumption on future facilities.

  16. Aggregate Energy Consumption and Sectoral Output in Nigeria ...

    African Journals Online (AJOL)

    The concluded that the nexus between energy consumption and output of individual sectors of the economy are different and therefore recommended sector specific energy policies rather the one fit-for-all policy. Also, energy conservation policies would be harmful to the productive activities of agricultural and service ...

  17. Psychological strategies to reduce energy consumption: project summary report

    Energy Technology Data Exchange (ETDEWEB)

    Becker, L J; Seligman, C; Darley, J M

    1979-06-30

    This report reviews the research conducted in connection with a project to apply psychological theory and procedures to the problems of encouraging residential energy conservation. A major part of the project involved surveys of residents' energy-related attitudes. The best (and only consistent) attitudinal predictor of residents' actual energy consumption was their attitude about thermal comfort. A number of other attitudes that could conceivably have been related to consumption, such as attitudes about the reality of the crisis, were not found to be related to consumption. Another major focus of the project was on the effectiveness of feedback (that is, giving residents information about their energy use) as an aid to residents' conservation efforts. A series of experiments demonstrated that frequent, credible energy-consumption feedback, coupled with encouragement to adopt a reasonable but difficult energy-conservation goal, could facilitate conservation. However, these studies also demonstrated that residents could not be given just any kind of information about their energy use as feedback and that even proper feedback would not lead to conservation in all households. Conditions that are crucial for the success of feedback as a conservation aid are discussed. Other studies conducted by the project looked at the effect on energy consumption of (1) a device to reduce air-conditioning waste by signalling when it is cool outside, (2) an automatic multi-setback thermostat, and (3) utility companies' average payment plans. A survey of residents' knowledge of their energy use also was conducted. 23 references.

  18. Energy Drink Consumption Practices of Young People in Bahrain

    Directory of Open Access Journals (Sweden)

    Maryam M. Nassaif

    2016-03-01

    Conclusion: Energy drink consumption is a popular socialization activity among adolescents of Bahrain. The potential health risks necessitates the need for novel health promotion strategies and advocacy efforts for healthy hydration practices.

  19. Scheduling home-appliances to optimize energy consumption

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances...... cannot exceed the maximum kWh. This will imply managing what appliances can use this electricity and which ones cannot. The problematic presented here can be analyzed by using teletraffic theory. In a communication network there are nodes requesting to use the resources to transmit their information......, and there is a maximum bandwidth that these nodes can use. In this project, the appliances request kWh instead of kbps, and the bandwidth is the maximum electricity usage per household....

  20. Predictive Model of Energy Consumption in Beer Production

    National Research Council Canada - National Science Library

    Tiecheng Pu; Jing Bai

    2013-01-01

    ...) in the beer production. Using the subtractive clustering on the historical data of energy consumption, the limit of artificial experience is conquered while confirming the number of fuzzy rules...

  1. Investigating energy consumption of coastal vacation rental homes

    Science.gov (United States)

    Myers, Sam

    In 2007, vacation rental properties in the United States accounted for more than 22% of the domestic lodging market. These properties are a unique segment of the lodging industry due to their residential design and commercial use. Coastal vacation rental properties represent the largest supply, demand and value of the nation's vacation rental supply. In the case of North Carolina's Outer Banks, tourism is the area's largest source of income, with vacation real estate agencies being the largest accommodation provider. This study uses a multiple regression analysis to investigate the energy consumption of 30 vacation rental homes on Hatteras Island. Hatteras Island's abundant supply of vacation rental homes provided a diverse sample to study energy consumption with a wide range of houses regarding size, age, and location. Since very little research has been conducted on the energy consumption of vacation rental homes, this study aims to contribute detailed information regarding the energy consumption of unique accommodation sector.

  2. FDI, Economic Growth, Energy Consumption & Environmental Nexus in Bangladesh

    National Research Council Canada - National Science Library

    Sandip SARKER; Arifuzzaman KHAN; Rezwan MAHMOOD

    2016-01-01

    This paper attempts to investigate the relationship among economic growth, energy consumption, CO2 emission, FDI and natural gas usage in Bangladesh through co-integration and Vector Error Correction model (VECM...

  3. A survey of energy-drink consumption among medical students

    National Research Council Canada - National Science Library

    Hidiroglu, Seyhan; Tanriover, Ozlem; Unaldi, Sule; Sulun, Serdar; Karavus, Melda

    2013-01-01

    To determine the frequency and pattern of energy drink consumption among medical school students, their knowledge of its effects and side effects and to see its relation with alcohol and cigarette usage...

  4. Occupants Influence on the Energy Consumption of Danish Domestic Buildings

    DEFF Research Database (Denmark)

    Larsen, Tine Steen; Knudsen, Henrik Nellemose; Kanstrup, Anne Marie

    This report is one of the results from the project “Occupants influence on the energy consumption of Danish domestic buildings – Phase 1”, which is partly funded by EUDP (Journalnr.: 64009-0248, Programområde: Energieffektivisering) The report provides state-of-the-art reviews within the various...... disciplines represented in the project by the project members, which all represent areas that relate to the title on occupants influence on the energy consumption....

  5. An Evolutionary Analysis of World Energy Consumption and World Population

    OpenAIRE

    Kriegel, U.; Mende, W.; Grauer, M.

    1983-01-01

    The evolution of large-scale systems is described by a model based on the assumption of hyperbolic growth and saturation processes. It is shown that this Hyper-Logistic Evolution Model (HLEM) successfully describes the development of world population and global primary energy consumption over the past century; the model is also used to provide projections of world population and primary energy consumption up to the year 2100.

  6. Bottlenose Dolphins: Energy Consumption during Pregnancy, Lactation, and Growth

    Science.gov (United States)

    1991-01-01

    cost for most mam- mars. The literature on energy consumption during gestation and lactation of bottle - nose dolphins is very small and all the reports...Tt453, from 18 months prior to parturition (-18). through birth (0), and continuing for 24 months of lactation (23). 36 Figure 1. Daily feeding ...Professional Paper 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS BOTTLENOSE DOLPHINS: PR: MM40 Energy Consumption During Pregnancy, Lactation , and Growth PE: 0603709N

  7. Energy Resources Consumption Minimization in Housing Construction

    Directory of Open Access Journals (Sweden)

    Balastov Alexey

    2017-01-01

    Full Text Available The article deals with the energy savings analysis during operation of buildings, provides the heat balance of residential premises, considers options for energy-efficient solutions for hot water supply systems in buildings. As technical facilities that allow the use of secondary heat sources and solar energy, there are also considered the systems with heat recovery of “gray” wastewater, heat pumps, solar collectors and photoelectric converters.

  8. Energy overview of Botswana: generation and consumption

    OpenAIRE

    Ofetotse, E. L.; Essah, Emmanuel A.

    2012-01-01

    Botswana has a basic need to explore its energy concept, this being its energy sources, generation and percentage of the population with access to electricity. At present, Botswana generates electricity from coal, which supplies about 29% (on average) of the country’s demand. The other 71% is imported mainly from South Africa (Eskom). Consequently, the dependence of Botswana on imports posses threats to the security of its energy supply. As a result, there is the need to understand the bases ...

  9. Energy Consumption Management of Virtual Cloud Computing Platform

    Science.gov (United States)

    Li, Lin

    2017-11-01

    For energy consumption management research on virtual cloud computing platforms, energy consumption management of virtual computers and cloud computing platform should be understood deeper. Only in this way can problems faced by energy consumption management be solved. In solving problems, the key to solutions points to data centers with high energy consumption, so people are in great need to use a new scientific technique. Virtualization technology and cloud computing have become powerful tools in people’s real life, work and production because they have strong strength and many advantages. Virtualization technology and cloud computing now is in a rapid developing trend. It has very high resource utilization rate. In this way, the presence of virtualization and cloud computing technologies is very necessary in the constantly developing information age. This paper has summarized, explained and further analyzed energy consumption management questions of the virtual cloud computing platform. It eventually gives people a clearer understanding of energy consumption management of virtual cloud computing platform and brings more help to various aspects of people’s live, work and son on.

  10. Specific energy consumption in microwave drying of garlic cloves

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, G.P. [Department of Processing and Food Engineering, College of Technology and Agricultural Engineering, Udaipur 313 001, Rajasthan (India); Prasad, Suresh [Agricultural and Food Engineering Department, Indian Institute of Technology, Kharagpur 721 302 (India)

    2006-09-15

    The convective and microwave-convective drying of garlic cloves was carried out in a laboratory scale microwave dryer, which was developed for this purpose. The specific energy consumption involved in the two drying processes was estimated from the energy supplied to the various components of the dryer during the drying period. The specific energy consumption was computed by dividing the total energy supplied by amount of water removed during the drying process. The specific energy consumption in convective drying of garlic cloves at 70{sup o}C temperature and 1.0m/s air velocity was estimated as 85.45MJ/kg of water evaporated. The increase in air velocity increased the energy consumption. The specific energy consumption at 40W of microwave power output, 70{sup o}C air temperature and 1.0m/s air velocity was 26.32MJ/kg of water removed, resulting in about a 70% energy saving as compared to convective drying processes. The drying time increased with increase in air velocity in microwave-convective drying process; a trend reverse to what was observed in convective drying process of garlic cloves. (author)

  11. Structural Evolution of Household Energy Consumption: A China Study

    Directory of Open Access Journals (Sweden)

    Qingsong Wang

    2015-04-01

    Full Text Available Sustainable energy production and consumption is one of the issues for the sustainable development strategy in China. As China’s economic development paradigm shifts, household energy consumption (HEC has become a focus of achieving national goals of energy efficiency and greenhouse gas reduction. The information entropy model and LMDI model were employed in this study in order to analyse the structural evolution of HEC, as well as its associated critical factors. The results indicate that the information entropy of HEC increased gradually, and coal will be reduced by clean energies, such as natural gas and liquefied petroleum gas. The information entropy tends to stabilize and converge due to rapid urbanization. Therefore, from the perspective of environmental protection and natural resource conservation, the structure of household energy consumption will be optimized. This study revealed that residents’ income level is one of the most critical factors for the increase of energy consumption, while the energy intensity is the only driving force for the reduction of HEC. The accumulated contribution of these two factors to the HEC is 240.53% and −161.75%, respectively. It is imperative to improve the energy efficiency in the residential sector. Recommendations are provided to improve the energy efficiency-related technologies, as well as the standards for the sustainable energy strategy.

  12. Energy consumptions per sector; Les consommations d'energie par secteur

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document presents the energy consumption data of France per energy type and sector of use in the form of tables and graphics for the last decade and sometimes before: 1 - residential and tertiary sector: energy consumption per energy source, energy consumption per use (coal, heavy and domestic fuels, natural gas, LPG (butane, propane), electricity), comparison of the share of each energy source between 1973 and 2003, 20 years of space heating data in main dwellings (1982-2002), district heating networks from 1987 to 1997; 2 - transportation sector: fuel consumption of individual cars in France (1990-2003, 1990-2002, 1990-2001, 1987-1999), some indicators about the energy consumption in transports in France (2000-2001); 3 - industry sector: consumption of fuel substitutes in the cement industry in 2001, importance and limitations. (J.S.)

  13. The energy consumption of control systems; Het energiegebruik van regelinstallaties

    Energy Technology Data Exchange (ETDEWEB)

    Van Gulik, A.R.; De Wildt, M.G. [Grontmij Nederland, Amersfoort (Netherlands)

    2013-07-15

    Control systems for e.g. indoor climate and illumination are essential in modern building services, and useful for comfort or energy conservation. Energy conservation is of course an important aim, but what is the energy consumption of the control systems? Is the consumption higher than the savings? This question was subject of a comprehensive study, with measurements and simulation calculations. It can be concluded that the energy consumption of control installation for spaces is substantial [Dutch] Regelinstallaties voor bijvoorbeeld klimaatregeling, verlichtingsregeling en domotica zijn niet meer weg te denken uit de moderne installatietechniek, of ze nu dienen voor comfort, gemak of energiebesparing. Maar hoeveel energie gebruiken deze installaties eigenlijk? Voor ontwerpers blijkt dit helemaal geen issue te zijn terwijl adviseurs, installateurs en zelfs fabrikanten zeggen hiervan geen idee te hebben. Door metingen en het gebruik van berekeningsmodellen is vastgesteld wat het energiegebruik van regelinstallaties op jaarbasis is. Dit blijkt substantieel te zijn, maar er zijn mogelijkheden om het gebruik te reduceren.

  14. Tweeting : Smart meters raise awareness of energy consumption in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2009-11-15

    The University of Mississippi (UM) will monitor, analyze and report on energy consumption in its campus buildings in real-time using SmartSynch Smart Meters. The technology uses smart meter data to help identify a detailed pattern of electricity usage with the objective of finding methods to alter behaviour to reduce electricity usage and carbon emissions. SmartSynch installed 16 Smart Meters on campus with additional deployments being planned. The technology will enable the university to monitor energy consumption, track building power performance over time, compare building energy usage, and review the impact of the weather on energy use while reducing its carbon footprint. Additionally, UM will use Facebook, Twitter and an RSS feed to provide regular public updates on its buildings' energy consumption based on SmartSynch Smart Meter data. Each building will have its own profile on the social networking sites. 1 ref., 1 fig.

  15. Building and occupant characteristics as determinants of residential energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Nieves, A.L.

    1981-10-01

    The major goals of the research are to gain insight into the probable effects of building energy performance standards on energy consumption; to obtain observations of actual residential energy consumption that could affirm or disaffirm comsumption estimates of the DOE 2.0A simulation model; and to investigate home owner's conservation investments and home purchase decisions. The first chapter covers the investigation of determinants of household energy consumption. The presentation begins with the underlying economic theory and its implications, and continues with a description of the data collection procedures, the formulation of variables, and then of data analysis and findings. In the second chapter the assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation.

  16. Carbon dioxide emissions, output, and energy consumption categories in Algeria.

    Science.gov (United States)

    Amri, Fethi

    2017-06-01

    This study examines the relation between CO2 emissions, income, non-renewable, and renewable energy consumption in Algeria during the period extending from 1980 to 2011. Our work gives particular attention to the validity of environmental Kuznets curve (EKC) hypothesis. The autoregressive distributed lag (ARDL) with break point method outcome demonstrates the positive effect of non-renewable type of energy on CO2 emissions consumption. On the contrary, the results reveal an insignificant effect of renewable energy on environment improvement. Moreover, the results accept the existence of EKC hypothesis but the highest gross domestic product value in logarithm scale of our data is inferior to the estimated turning point. Consequently, policy-makers in Algeria should expand the ratio of renewable energy and should decrease the quota of non-renewable energy consumption.

  17. Analysis on Energy Consumption and Indoor Environment in Kunming, China

    Directory of Open Access Journals (Sweden)

    Tianchi Hu

    2012-10-01

    Full Text Available The purposes of this study are to investigate and analyze the actual conditions of the urban residential energy consumption, and hence to ascertain what will be the important factors that influence the annual energy consumption in Kunming, which has a mild climate. The questionnaire surveys reveal building characteristics, housing appliances, household characteristics, indoor thermal environment and aspects of life style, during winter and summer seasons. The questionnaire analyses show that only 5% of the investigated households have air conditioning, and 12% have heating appliances. Most households use solar energy as a water heater energy source because the sunshine hours in Kunming are long. The energy consumption analyses show that the average annual energy consumption of households in Kunming reached 12.2 GJ, and cooking accounted for 5.3 GJ, which is the largest part. Most of the time in summer, the outdoor temperature is lower than living room and bedroom temperatures; thus, natural ventilation is a useful cooling method for households in Kunming. The absolute humidity in summer is about 11 g/kg, while in winter it is about 5 g/kg. The influence factor analyses show that building construction year, water heater type and annual income are important influential factors on annual energy consumption.

  18. Wireless network interface energy consumption implications of popular streaming formats

    Science.gov (United States)

    Chandra, Surendar

    2001-12-01

    With the proliferation of mobile streaming multimedia, available battery capacity constrains the end-user experience. Since streaming applications tend to be long running, wireless network interface card's (WNIC) energy consumption is particularly an acute problem. In this work, we explore the WNIC energy consumption implications of popular multimedia streaming formats from Microsoft (Windows media), Real (Real media) and Apple (Quick Time). We investigate the energy consumption under varying stream bandwidth and network loss rates. We also explore history-based client-side strategies to reduce the energy consumed by transitioning the WNICs to a lower power consuming sleep state. We show that Microsoft media tends to transmit packets at regular intervals; streams optimized for 28.8 Kbps can save over 80% in energy consumption with 2% data loss. A high bandwidth stream (768 Kbps) can still save 57% in energy consumption with less than 0.3% data loss. For high bandwidth streams, Microsoft media exploits network-level packet fragmentation, which can lead to excessive packet loss (and wasted energy) in a lossy network. Real stream packets tend to be sent closer to each other, especially at higher bandwidths. Quicktime packets sometimes arrive in quick succession; most likely an application level fragmentation mechanism. Such packets are harder to predict at the network level without understanding the packet semantics.

  19. Mobile Location Sharing: An Energy Consumption Study

    OpenAIRE

    Vergara Alonso, Ekhiotz Jon; Prihodko, Mihails; Nadjm-Tehrani, Simin

    2013-01-01

    The use of a mobile device's battery for frequent transmissions of position data in a location sharing application can be more expensive than the location retrieval itself. This is in part due to energy-agnostic application development and in part dependent on choice of protocols. This paper studies the lightweight Message Queuing Telemetry Transport protocol (MQTT) as an application layer protocol on top of the third generation cellular communication. The energy efficiency and amount of data...

  20. Low energy consumption vortex wave flow membrane bioreactor.

    Science.gov (United States)

    Wang, Zhiqiang; Dong, Weilong; Hu, Xiaohong; Sun, Tianyu; Wang, Tao; Sun, Youshan

    2017-11-01

    In order to reduce the energy consumption and membrane fouling of the conventional membrane bioreactor (MBR), a kind of low energy consumption vortex wave flow MBR was exploited based on the combination of biofilm process and membrane filtration process, as well as the vortex wave flow technique. The experimental results showed that the vortex wave flow state in the membrane module could be formed when the Reynolds number (Re) of liquid was adjusted between 450 and 1,050, and the membrane flux declined more slowly in the vortex wave flow state than those in the laminar flow state and turbulent flow state. The MBR system was used to treat domestic wastewater under the condition of vortex wave flow state for 30 days. The results showed that the removal efficiency for CODcr and NH3-N was 82% and 98% respectively, and the permeate quality met the requirement of 'Water quality standard for urban miscellaneous water consumption (GB/T 18920-2002)'. Analysis of the energy consumption of the MBR showed that the average energy consumption was 1.90 ± 0.55 kWh/m3 (permeate), which was only two thirds of conventional MBR energy consumption.

  1. Energy consumption in the food chain - Comparing alternative options in food production and consumption

    NARCIS (Netherlands)

    Dutilh, CE; Kramer, KJ

    Energy consumption in the various stages of the food chain, provides a reasonable indicator for the environmental impact in the production of food. This paper provides specific information on the energy requirement for the main alternatives in each production stage, which should allow the

  2. Energy Drink Consumption: Beneficial and Adverse Health Effects

    OpenAIRE

    Alsunni, Ahmed Abdulrahman

    2015-01-01

    Consumption of energy drinks has been increasing dramatically in the last two decades, particularly amongst adolescents and young adults. Energy drinks are aggressively marketed with the claim that these products give an energy boost to improve physical and cognitive performance. However, studies supporting these claims are limited. In fact, several adverse health effects have been related to energy drink; this has raised the question of whether these beverages are safe. This review was carri...

  3. Mapping water consumption for energy production around the Pacific Rim

    Science.gov (United States)

    Tidwell, Vincent; Moreland, Barbie

    2016-09-01

    World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. For six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.

  4. Estimating Energy Consumption of Transport Modes in China Using DEA

    Directory of Open Access Journals (Sweden)

    Weibin Lin

    2015-04-01

    Full Text Available The rapid growth of transport requirements in China will incur increasing transport energy demands and associated environmental pressures. In this paper, we employ a generalized data envelopment analysis (DEA to evaluate the relative energy efficiency of rail, road, aviation and water transport from 1971 to 2011 by considering the energy input and passenger-kilometers (PKM and freight ton-kilometers (TKM outputs. The results show that the optimal energy efficiencies observed in 2011 are for rail and water transport, with the opposite observed for the energy efficiencies of aviation and road transport. In addition, we extend the DEA model to estimate future transport energy consumption in China. If each transport mode in 2020 is optimized throughout the observed period, the national transport energy consumption in 2020 will reach 497,701 kilotons coal equivalent (ktce, whereas the annual growth rate from 2011 to 2020 will be 5.7%. Assuming that efficiency improvements occur in this period, the estimated national transport energy consumption in 2020 will be 443,126 ktce, whereas the annual growth rate from 2011 to 2020 will be 4.4%, which is still higher than that of the national total energy consumption (3.8%.

  5. Building Energy Consumption Prediction: An Extreme Deep Learning Approach

    Directory of Open Access Journals (Sweden)

    Chengdong Li

    2017-10-01

    Full Text Available Building energy consumption prediction plays an important role in improving the energy utilization rate through helping building managers to make better decisions. However, as a result of randomness and noisy disturbance, it is not an easy task to realize accurate prediction of the building energy consumption. In order to obtain better building energy consumption prediction accuracy, an extreme deep learning approach is presented in this paper. The proposed approach combines stacked autoencoders (SAEs with the extreme learning machine (ELM to take advantage of their respective characteristics. In this proposed approach, the SAE is used to extract the building energy consumption features, while the ELM is utilized as a predictor to obtain accurate prediction results. To determine the input variables of the extreme deep learning model, the partial autocorrelation analysis method is adopted. Additionally, in order to examine the performances of the proposed approach, it is compared with some popular machine learning methods, such as the backward propagation neural network (BPNN, support vector regression (SVR, the generalized radial basis function neural network (GRBFNN and multiple linear regression (MLR. Experimental results demonstrate that the proposed method has the best prediction performance in different cases of the building energy consumption.

  6. The solar greenhouse: technology for low energy consumption

    NARCIS (Netherlands)

    Bot, G.P.A.

    2003-01-01

    In conventional greenhouse crop production the high level of inputs conflicts with consumer demands for safe products and with restrictions to environmental emissions. In Northwest Europe the main problem is to reduce absolute energy consumption. If today's available technology is applied energy

  7. Energy Consumption Performance Analysis of Electrical Mitad at ...

    African Journals Online (AJOL)

    Bheema

    ABSTRACT. The Injera baking electrical mitad is the most energy-consuming device in every household in. Ethiopia. This research presents a detail engineering study on the energy-consumption performance of existing electrical mitad in Mekelle city. The research work considered thirty-one electrical mitad from different ...

  8. Energy consumption performance analysis of electrical mitad at ...

    African Journals Online (AJOL)

    The Injera baking electrical mitad is the most energy-consuming device in every household in Ethiopia. This research presents a detail engineering study on the energy-consumption performance of existing electrical mitad in Mekelle city. The research work considered thirty-one electrical mitad from different workshops in ...

  9. Electricity's "Disappearing Act": Understanding Energy Consumption and Phantom Loads

    Science.gov (United States)

    Rusk, Bryan; Mahfouz, Tarek; Jones, James

    2011-01-01

    Energy exists in many forms and can be converted from one form to another. However, this conversion is not 100% efficient, and energy is lost in the form of heat during conversion. In addition, approximately 6% of the monthly consumption of the average American household's electricity is neither lost nor used by its residents. These losses are…

  10. Moisture buffering phenomenon and its impact on building energy consumption

    DEFF Research Database (Denmark)

    Zhang, Mingjie; Qin, Menghao; Rode, Carsten

    2017-01-01

    buffering on building energy consumption in different climate conditions is assessed by using numerical simulations. The results show that the potential energy saving rate could be up to 25–30% when using proper hygroscopic materials in the test building in temperate climates and semi-arid climates. Finally...

  11. The method of planning the energy consumption for electricity market

    Science.gov (United States)

    Russkov, O. V.; Saradgishvili, S. E.

    2017-10-01

    The limitations of existing forecast models are defined. The offered method is based on game theory, probabilities theory and forecasting the energy prices relations. New method is the basis for planning the uneven energy consumption of industrial enterprise. Ecological side of the offered method is disclosed. The program module performed the algorithm of the method is described. Positive method tests at the industrial enterprise are shown. The offered method allows optimizing the difference between planned and factual consumption of energy every hour of a day. The conclusion about applicability of the method for addressing economic and ecological challenges is made.

  12. Energy Consumption Trends for Industry Segments in Northern Africa

    Directory of Open Access Journals (Sweden)

    Zerroug Abdellah

    2015-12-01

    Full Text Available This article analyzes trends of the total final energy consumption in sectors of building materials, residential, and transport industry in Algeria. The total final energy by sector and type of fuel is analyzed. The evolution of the total energy intensity and the impact of energy consumption on the environment are discussed. Consumption per capita in Algeria is 1,058.0 kg of oil equivalent per person, while in Morocco, the country with almost the same number of inhabitants it is 458 Kgoe and in Tunisia it is 843 Kgoe. The total emission of gases is equal to 46 million Tons of CO2, with an average of 3 TECO2 / TOE.

  13. Consumption Behavior Analytics-Aided Energy Forecasting and Dispatch

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yingchen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yang, Rui [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jiang, Huaiguang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Kaiqing [University of Illinois Urbana-Champaign; Zhang, Jun Jason [University of Denver

    2017-08-17

    For decades, electricity customers have been treated as mere recipients of electricity in vertically integrated power systems. However, as customers have widely adopted distributed energy resources and other forms of customer participation in active dispatch (such as demand response) have taken shape, the value of mining knowledge from customer behavior patterns and using it for power system operation is increasing. Further, the variability of renewable energy resources has been considered a liability to the grid. However, electricity consumption has shown the same level of variability and uncertainty, and this is sometimes overlooked. This article investigates data analytics and forecasting methods to identify correlations between electricity consumption behavior and distributed photovoltaic (PV) output. The forecasting results feed into a predictive energy management system that optimizes energy consumption in the near future to balance customer demand and power system needs.

  14. Production, consumption and research on solar energy

    DEFF Research Database (Denmark)

    Sanz-Casado, Elias; Lascurain-Sánchez, Maria Luisa; Serrano-Lopez, Antonio Eleazar

    2014-01-01

    together account for 51% of the total in the EU-27; the pattern of topics researched in the two countries is very similar; and their international collaboration is more intense than the world average and higher than in countries such as the USA, China or Japan. Collaboration between them is likewise......An analysis of scientific publications on solar energy was conducted to determine whether public interest in the subject is mirrored by more intense research in the area. To this end, the research published by Spain and Germany, the two EU countries with the highest installed photovoltaic capacity......, was analyzed based on Web of Science data. The results show that: solar output has risen substantially; solar research has a greater impact (measured in terms of citations) than publications on other renewables such as wind power; scientific production on solar energy is high in Germany and Spain, which...

  15. Energy balance of forage consumption by phyllophagous insects: optimization model

    Directory of Open Access Journals (Sweden)

    O. V. Tarasova

    2015-06-01

    Full Text Available The model of optimal food consumption by phytophagous insects proposed, in which the metabolic costs are presented in the form of two components – the cost of food utilization and costs for proper metabolism of the individuals. Two measures were introduced – the «price» of food conversion and the «price» of biomass synthesis of individuals to assess the effectiveness of food consumption by caterpillars. The proposed approach to the description of food consumption by insects provides the exact solutions of the equation of energy balance of food consumption and determining the effectiveness of consumption and the risk of death of the individual. Experiments on larvae’s feeding in laboratory conditions were carried out to verify the model. Caterpillars of Aporia crataegi L. (Lepidoptera, Pieridae were the research subjects. Supply­demand balance, calculated value of the environmental price of consumption and efficiency of food consumption for each individual were determined from experimental data. It was found that the fertility of the female does not depend on the weight of food consumed by it, but is linearly dependent on the food consumption efficiency index. The greater the efficiency of food consumption by an individual, the higher its fertility. The data obtained in the course of experiments on the feeding caterpillars Aporia crataegi were compared with the data presented in the works of other authors and counted in the proposed model of consumption. Calculations allowed estimation of the critical value of food conversion price below which the energy balance is negative and the existence of an individual is not possible.

  16. A survey of energy drink consumption patterns among college students

    Directory of Open Access Journals (Sweden)

    Carpenter-Aeby Tracy

    2007-10-01

    Full Text Available Abstract Background Energy drink consumption has continued to gain in popularity since the 1997 debut of Red Bull, the current leader in the energy drink market. Although energy drinks are targeted to young adult consumers, there has been little research regarding energy drink consumption patterns among college students in the United States. The purpose of this study was to determine energy drink consumption patterns among college students, prevalence and frequency of energy drink use for six situations, namely for insufficient sleep, to increase energy (in general, while studying, driving long periods of time, drinking with alcohol while partying, and to treat a hangover, and prevalence of adverse side effects and energy drink use dose effects among college energy drink users. Methods Based on the responses from a 32 member college student focus group and a field test, a 19 item survey was used to assess energy drink consumption patterns of 496 randomly surveyed college students attending a state university in the Central Atlantic region of the United States. Results Fifty one percent of participants (n = 253 reported consuming greater than one energy drink each month in an average month for the current semester (defined as energy drink user. The majority of users consumed energy drinks for insufficient sleep (67%, to increase energy (65%, and to drink with alcohol while partying (54%. The majority of users consumed one energy drink to treat most situations although using three or more was a common practice to drink with alcohol while partying (49%. Weekly jolt and crash episodes were experienced by 29% of users, 22% reported ever having headaches, and 19% heart palpitations from consuming energy drinks. There was a significant dose effect only for jolt and crash episodes. Conclusion Using energy drinks is a popular practice among college students for a variety of situations. Although for the majority of situations assessed, users consumed one

  17. A survey of energy drink consumption patterns among college students.

    Science.gov (United States)

    Malinauskas, Brenda M; Aeby, Victor G; Overton, Reginald F; Carpenter-Aeby, Tracy; Barber-Heidal, Kimberly

    2007-10-31

    Energy drink consumption has continued to gain in popularity since the 1997 debut of Red Bull, the current leader in the energy drink market. Although energy drinks are targeted to young adult consumers, there has been little research regarding energy drink consumption patterns among college students in the United States. The purpose of this study was to determine energy drink consumption patterns among college students, prevalence and frequency of energy drink use for six situations, namely for insufficient sleep, to increase energy (in general), while studying, driving long periods of time, drinking with alcohol while partying, and to treat a hangover, and prevalence of adverse side effects and energy drink use dose effects among college energy drink users. Based on the responses from a 32 member college student focus group and a field test, a 19 item survey was used to assess energy drink consumption patterns of 496 randomly surveyed college students attending a state university in the Central Atlantic region of the United States. Fifty one percent of participants (n = 253) reported consuming greater than one energy drink each month in an average month for the current semester (defined as energy drink user). The majority of users consumed energy drinks for insufficient sleep (67%), to increase energy (65%), and to drink with alcohol while partying (54%). The majority of users consumed one energy drink to treat most situations although using three or more was a common practice to drink with alcohol while partying (49%). Weekly jolt and crash episodes were experienced by 29% of users, 22% reported ever having headaches, and 19% heart palpitations from consuming energy drinks. There was a significant dose effect only for jolt and crash episodes. Using energy drinks is a popular practice among college students for a variety of situations. Although for the majority of situations assessed, users consumed one energy drink with a reported frequency of 1 - 4 days per

  18. Energy consumption and economic development in Sub-Sahara Africa

    Energy Technology Data Exchange (ETDEWEB)

    Kebede, Ellene [Department of Agricultural and Environmental Science, 210 Campbell, Hall, Tuskegee University, Tuskegee, AL 36088 (United States); Kagochi, John [School of Business Administration, University of Houston-Victoria, 3007, N. Ben Wilson, Victoria, 77901 (United States); Jolly, Curtis M. [Department of Agricultural Economics and Rural Sociology, 212 Comer, Hall Auburn University, AL 36849 (United States)

    2010-05-15

    Sub-Saharan African countries' economic development is dependent on energy consumption. This paper assesses total energy demand, which is composed of traditional energy (wood fuel) and commercial energy (electricity and petroleum), in the Central, East, South, and West regions of Sub-Saharan Africa. Cross-sectional time series data for 20 countries in 25 years are analyzed, and the results of the study show that wood fuel accounts for 70% of energy consumption, followed by petroleum, with most industrial activities utilizing some form of wood fuel. Regression results suggest that energy demand is inversely related to the price of petroleum and industrial development, but positively related to GDP, population growth rate, and agricultural expansion, and that price elasticity is less than one. The model results also show that there are regional differences in energy demand. In addition, the interaction of population growth rates by regions generates mixed results, and there are regional differences in the use of commercial energy consumption, and GDP growth. The findings of this study suggest that countries must diversify their energy sources and introduce energy-efficient devices and equipment at all levels of the economy to improve GDP growth rate and GDP per capita. (author)

  19. URBAN FEATURES AND ENERGY CONSUMPTION AT LOCAL LEVEL

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2012-12-01

    Full Text Available There has been a growing interest in discovering the human effects on the environment and energy consumption in recent decades. It is estimated that the share of energy consumed in transportation and housing systems are around 20 and 30 percent of total energy consumption respectively. Furthermore, the residential greenhouse emissions depend on urban form and structure. This paper explores the effects of urban features on residential energy consumption at neighborhood level using data collected through household questionnaire (n=140. Two residential districts in metropolitan Shiraz, south of Iran, were selected as case study areas. Different features of two areas were compared including building density, typology, housing location, parcel size, floor area and construction materials. Ordinary linear regression was used to discover the impact of explanatory variables on energy consumption. It was found that some physical variables such as parcel size, setback and number of floors played significant roles in explaining the variances exist in energy use level. The results can be used by governmental agencies to modify land use policies and subdivision rules in hope of saving energy and achieving a sustainable community.

  20. Limiting biomass consumption for heating in 100% renewable energy systems

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Lund, Henrik; Connolly, David

    2012-01-01

    -scale solar thermal, large heat pumps, geothermal heat, industrial surplus heat, and waste incineration. Where the energy density in the building stock is not high enough for DH to be economical, geothermal heat pumps can be recommended for individual heating systems, even though biomass consumption is higher......The utilisation of biomass poses large challenges in renewable energy systems while buildings account for a substantial part of the energy supply even in 100% renewable energy systems. In this paper the focus is on how the heating sector can reduce its consumption of biomass, thus leaving biomass...... for other sectors, but while still enabling a 100% renewable energy system. The analyses of heating technologies shows that district heating (DH) systems are important in limiting the dependence on biomass and create cost effective solutions. DH systems are especially important in renewable energy systems...

  1. Analysis of Home Energy Consumption by K-Mean

    Directory of Open Access Journals (Sweden)

    Fahad Razaque

    2017-10-01

    Full Text Available The smart meter offered exceptional chances to well comprehend energy consumption manners in which quantity of data being generated. One request was the separation of energy load-profiles into clusters of related conduct. The Research measured the resemblance between groups them together and load-profiles into clusters by k-means clustering algorithm. The cluster met, also called “Gender (Male/Female, House (Rented/Owned and customers status (Satisfied/Unsatisfied” display methods of consuming energy. It provided value information aimed at utilities to generate specific electricity charges and healthier aim energy efficiency programs. The results show that 43% extremely dissatisfied of energy customer is achieved by using energy consumption.

  2. Upgrading existing evaporators to reduce energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    This manual is intended to assist the evaporator engineer who will be performing the technical and economic analyses to determine the most suitable evaporator upgrading technique for his particular plant. Information is included on potentials for upgrading evaporators; correctable operating factors; heat recovery and other improvements in energy use with minor capital investments; upgrading through major capital investments; guidelines for formulating an upgrading program; and new technologies encompassing advanced designs, use of solar and low-grade heat sources, and heat transfer enhancement. A 36 item bibliography is included. (LCL)

  3. Estimation of energy consumption for domestic hot water in hospitals

    Energy Technology Data Exchange (ETDEWEB)

    Katsanis, J.S.; Tsarabaris, P.T.; Bourkas, P.D. [National Technical Univ. of Athens, Athens (Greece). Dept. of Electrical and Computer Engineering; Halaris, P.G. [Asklepieon Voulas General Hospital, Athens (Greece). Electrical Engineering Dept. of Biomedical Technology; Malahias, G.N. [Hellenic Naval Academy, Athens (Greece)

    2006-07-01

    Hospitals are among the largest energy consumers in the building sector, with hot water constituting the largest part of the base load which consists of partial loads for heating, sanitary hot water, sterilization, disinfection, kitchen thermal load and laundry thermal load. This study estimated the energy consumption for domestic hot water (DHW) for Greek hospitals. The purpose was to evaluate the feasibility of using cogeneration systems in hospitals, which would combine electric and thermal energy from the same energy source. In this study, only the data for the consumption of DHW was presented. DHW in Greek hospitals is 45 degrees C except for the kitchen, laundry and anatomic room supply where hot water reaches 65 degrees C. Water consumption varies considerably depending on the condition of the hospital and extent of outpatients and clinical provisions. Hot water production is typically achieved in thermal substations through hot water production centres that include hot water storage tanks; heat exchangers; heating medium circuits; pipework for domestic hot water and connection with cold water supply. This presentation described the sizing of the DHW system and estimated the simultaneity factor for hot and cold water in hospitals. The hot water demand curve was used to estimate the energy consumption per day for hot water based on 18 hours of operation. Assuming that the hot water demand curve is typical, the energy consumption was estimated for sanitary hot water per day as a function of the specific water consumption for hospital with different number of beds. The hot water energy use was nearly 50 kWh per cubic meter water. The thermal losses in the hot water piping network were not considered in this study. 17 refs., 6 tabs., 6 figs.

  4. Energy consumption of buildings depends on the daylight

    Directory of Open Access Journals (Sweden)

    Piotrowska Ewa

    2017-01-01

    Full Text Available In order to reduce energy consumption in heated buildings and thus fossil fuels, there is a need for proper modernization of existing buildings and new construction with reduced energy demand. The size and the insulation of windows have a decisive influence on the amount of heat loss. The study looks into the impact of decreased power consumption through optimal use of sunlight through the selection of the size of windows, type of windows, and adjusting the light intensity using an automatic control of lighting according to the amount of sunlight reaching the room. The research related to the differences between the six types of windows in relations to the energy consumption of the building.

  5. Data Acquisition and Transmission System for Building Energy Consumption Monitoring

    Directory of Open Access Journals (Sweden)

    Liang Zhao

    2013-01-01

    Full Text Available Building energy consumption monitoring and management system have been developed widely in China in order to gain the real-time data of energy consumption in buildings for analyzing it in the next state work. This paper describes a low-cost and small-sized collector based on the STM32 microcontroller, which can be placed in a building easily to implement the work of data acquisition, storage, and transmission. The collector gathers the electricity, water, heat, and energy consumption data through the RS485 field bus and stores the data into an SD card with mass storage, finally, using Internet to finish the communication and transmission to data server through TCP protocol. The collector has been used in application for two years, and the results show that the system is reliable and stable.

  6. Research and Analysis on Energy Consumption Features of Civil Airports

    Science.gov (United States)

    Li, Bo; Zhang, Wen; Wang, Jianping; Xu, Junku; Su, Jixiang

    2017-11-01

    Civil aviation is an important part of China’s transportation system, and also the fastest-growing field of comprehensive transportation. Airports, as a key infrastructure of the air transportation system, are the junctions of air and ground transportation. Large airports are generally comprehensive transportation hubs that integrate various modes of transportation, serving as important functional zones of cities. Compared with other transportation hubs, airports cover a wide area, with plenty of functional sections, complex systems and strong specialization, while airport buildings represented by terminals have exhibited characteristics of large space, massive energy consumption, high requirement for safety and comfort, as well as concentrated and rapidly changing passenger flows. Through research and analysis on energy consumption features of civil airports, and analysis on energy consumption features of airports with different sizes or in different climate regions, this article has drawn conclusions therefrom.

  7. Research on the optimal energy consumption of oil pipeline.

    Science.gov (United States)

    Liu, Enbin; Li, Changjun; Yang, Liuting; Liu, Song; Wu, Mingchang; Wang, Di

    2015-07-01

    Most of the Chinese crude oil is easy to curdle and has high viscosity, so heating transportation is usually selected. Energy consumption by this method mainly comes from furnaces and pumps. Currently, operating parameters of these pipelines were determined according to experience of dispatch. It cause high energy consumption and high cost of pipeline running, so it could not adapt to energy conservation policy. The present study focused on consuming lowest energy to operate oil transportation line. To begin with, several optimization variables were set which included pump combinations, suction pressure, discharge pressure, and station temperature. Then constraint conditions were set to establish an optimal mathematical model of running transportation line. Furthermore, genetic algorithm was used to solve the model, in meantime, selection operation, cross operation and mutation operation in the genetic algorithm were improved. Finally, a crude oil pipeline running optimization software was developed. Through optimal analyzing, S-L transportation line and contrasting with the actual working conditions, it was found that optimal operation scheme could reduce energy consumption by 5% - 9%. In addition, optimal operation scheme also considered the effect of seasons and flow on energy consumption of S-L transportation line.

  8. Benchmarking energy consumption in municipal wastewater treatment plants in Japan.

    Science.gov (United States)

    Mizuta, Kentaro; Shimada, Masao

    2010-01-01

    Reduction of greenhouse gas (GHG) emissions is one of the most important tasks facing municipal WWTPs. Electric power consumption typically accounts for about 90% of the total energy consumption. This study presents a benchmarking analysis of electric power consumption. The specific power consumption (SPC) ranged from 0.44 to 2.07 kWh/m(3) for oxidation ditch plants and from 0.30 to 1.89 kWh/m(3) for conventional activated sludge plants without sludge incineration. Observed differences of the SPC can be attributed to the difference in the scale of plants rather than to different kinds of wastewater treatment processes. It was concluded that economical benefits by centralizing treatment had contributed significantly to the reduction of energy consumption. Further analysis was carried out on the plant that had shown an extremely small SPC value of 0.32 kWh/m(3). In this WWTP, a large amount of digestion gas was generated by anaerobic digestion. In particular, it was used to generate power using phosphoric acid fuel cells to generate approximately 50% of the energy consumed in the plant. It was calculated that this plant had reduced the overall SPC by 0.17 kWh/m(3). The effect of power generation using digestion gas demonstrated clearly the advantage of implementing energy recovery schemes.

  9. Modelling electric trains energy consumption using Neural Networks

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Fernandez, P.; Garcia Roman, C.; Insa Franco, R.

    2016-07-01

    Nowadays there is an evident concern regarding the efficiency and sustainability of the transport sector due to both the threat of climate change and the current financial crisis. This concern explains the growth of railways over the last years as they present an inherent efficiency compared to other transport means. However, in order to further expand their role, it is necessary to optimise their energy consumption so as to increase their competitiveness. Improving railways energy efficiency requires both reliable data and modelling tools that will allow the study of different variables and alternatives. With this need in mind, this paper presents the development of consumption models based on neural networks that calculate the energy consumption of electric trains. These networks have been trained based on an extensive set of consumption data measured in line 1 of the Valencia Metro Network. Once trained, the neural networks provide a reliable estimation of the vehicles consumption along a specific route when fed with input data such as train speed, acceleration or track longitudinal slope. These networks represent a useful modelling tool that may allow a deeper study of railway lines in terms of energy expenditure with the objective of reducing the costs and environmental impact associated to railways. (Author)

  10. Energy-drink consumption in college students and associated factors.

    Science.gov (United States)

    Attila, Sema; Çakir, Banu

    2011-03-01

    To investigate the frequency of energy-drink consumption and associated factors in a group of college students. A cross-sectional study was conducted in Hacettepe University (Ankara, Turkey) and included 439 students pursuing a career in medicine, sports, and arts. Only fourth-year students were approached. Data were collected using a self-administered standard questionnaire. In bivariate analyses, frequency of energy-drink consumption was higher in students of arts and sports and in those who did not have breakfast on a regular basis, ever smoked cigarettes, drank alcoholic beverages, and regularly engaged in sports compared with their counterparts. Many students who had "ever" tried an energy drink did so the first time because they wondered about its taste. Of regular users of energy drinks, reasons for using such drinks varied across the three selected groups of students and included obtaining getting energy, staying awake, boosting performance while doing sports, or mixing with alcoholic beverages. About 40% of all current users of energy drinks reported that they mixed those with alcoholic beverages. In multivariate analyses, statistically significant predictors of energy-drink consumption were faculty type, presence of any health insurance, use of alcoholic beverages, and monthly income, controlling for gender. Most students could not correctly define the ingredients of energy drinks or their potential hazardous health effects, and they could not distinguish energy and sports drinks when they were requested to select them from a list of commercial names of various drinks. Consumption of energy drinks, despite the variation in the reason for choosing such drinks, is quite common in college students. Awareness of university students of the ingredients and potential health hazards of energy drinks, in particular in mixing with alcoholic beverages, should be increased. Copyright © 2011. Published by Elsevier Inc.

  11. Analysis of federal incentives used to stimulate energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Cole, R.J.; Cone, B.W.; Emery, J.C.; Huelshoff, M.; Lenerz, D.E.; Marcus, A.; Morris, F.A.; Sheppard, W.J.; Sommers, P.

    1981-08-01

    The purpose of the analysis is to identify and quantify Federal incentives that have increased the consumption of coal, oil, natural gas, and electricity. The introductory chapter is intended as a device for presenting the policy questions about the incentives that can be used to stimulate desired levels of energy development. In the theoretical chapter federal incentives were identified for the consumption of energy as Federal government actions whose major intent or result is to stimulate energy consumption. The stimulus comes through changing values of variables included in energy demand functions, thereby inducing energy consumers to move along the function in the direction of greater quantity of energy demanded, or through inducing a shift of the function to a position where more energy will be demanded at a given price. The demand variables fall into one of six categories: price of the energy form, price of complements, price of substitutes, preferences, income, and technology. The government can provide such incentives using six different policy instruments: taxation, disbursements, requirements, nontraditional services, traditional services, and market activity. The four major energy forms were examined. Six energy-consuming sectors were examined: residential, commercial, industrial, agricultural, transportation, and public. Two types of analyses of incentive actions are presented in this volume. The generic chapter focused on actions taken in 1978 across all energy forms. The subsequent chapters traced the patterns of incentive actions, energy form by energy form, from the beginning of the 20th century, to the present. The summary chapter includes the results of the previous chapters presented by energy form, incentive type, and user group. Finally, the implications of these results for solar policy are presented in the last chapter. (MCW)

  12. Projected energy and water consumption of Pacific Northwest irrigation systems

    Energy Technology Data Exchange (ETDEWEB)

    King, L. D.; Hellickson, M. L.; Schmisseur, W. E.; Shearer, M. N.

    1978-10-01

    A computer model has been developed to predict present and future regional water, energy, labor, and capital requirements of irrigated agricultural production in Idaho, Oregon, and Washington. The energy requirements calculated were on-farm pumping, and total energies. Total energies are the combined energies of on-farm pumping, manufacture, and installation. Irrigation system selections and modifications were based on an economic analysis utilizing the following input parameters: water, energy, labor, and capital costs and requirements; groundwater and surface water pumping lifts; improved application efficiencies; and pumping plant efficiencies. Major conclusions and implications of this analysis indicate that: as water application efficiencies increases additional quantities of water will not become available to other users; an overall increase in water application efficiencies resulted in decreases in gross water applications and increases in overall on-farm pumping and total energy consumptions; more energy will be consumed as pumping and total energies than will be conserved through decreased diversion pumping energy requirements; pump-back and similar technologies have the potential of both increasing application efficiencies and energy conservation; and the interrelationships understood between applying water in quantities greater than required for crop consumptive use and leaching, and late season in-steam flow augmentation and/or aquifer recharge are not well understood, and sound policy decisions concerning agricultural use of water and energy cannot be made until these interrelationships are better understood.

  13. Energy consumption and total factor productivity growth in Iranian agriculture

    Directory of Open Access Journals (Sweden)

    Reza Moghaddasi

    2016-11-01

    Full Text Available In this study we investigated the relation between energy consumption and growth of total factor productivity (TFP of agriculture in Iran from 1974 to 2012 using Solow residual method. The results from estimated aggregate Cobb–Douglas production function showed that one percent change in the value of labor, capital and energy will lead to 4.07, 0.09 and 0.49 percent change in agriculture value added, respectively. Also in a long term, based on the Johansen cointegration test, there is a negative relation between TFP growth and energy consumption in Iranian agriculture which might be due to cheap and inefficient energy use in this sector. Gradual liberalization of energy price and use of so called green box support policies is recommended.

  14. Online Anomaly Energy Consumption Detection Using Lambda Architecture

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Iftikhar, Nadeem; Nielsen, Per Sieverts

    2016-01-01

    With the widely use of smart meters in the energy sector, anomaly detection becomes a crucial mean to study the unusual consumption behaviors of customers, and to discover unexpected events of using energy promptly. Detecting consumption anomalies is, essentially, a real-time big data analytics...... problem, which does data mining on a large amount of parallel data streams from smart meters. In this paper, we propose a supervised learning and statistical-based anomaly detection method, and implement a Lambda system using the in-memory distributed computing framework, Spark and its extension Spark...

  15. Legitimacy of concerns about caffeine and energy drink consumption.

    Science.gov (United States)

    Wesensten, Nancy J

    2014-10-01

    Whether caffeine and energy drink consumption presents a critical emerging health problem is not currently known. Available evidence suggests that energy drink consumption represents a change in the ways in which individuals in the United States consume caffeine but that the amount of caffeine consumed daily has not appreciably increased. In the present review, the question of whether Americans are sleep deprived (a potential reason for using caffeine) is briefly explored. Reported rates of daily caffeine consumption (based on beverage formulation) and data obtained from both civilian and military populations in the United States are examined, the efficacy of ingredients other than caffeine in energy drinks is discussed, and the safety and side effects of caffeine are addressed, including whether evidence supports the contention that excessive caffeine/energy drink consumption induces risky behavior. The available evidence suggests that the main legitimate concern regarding caffeine and energy drink use is the potential negative impact on sleep but that, otherwise, there is no cause for concern regarding caffeine use in the general population. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  16. Energy consumption of electricity end uses in Malaysian historic buildings

    Energy Technology Data Exchange (ETDEWEB)

    Kamaruzzaman, Syahrul N.; Edwards, Rodger E.; Zawawi, Emma M.A.

    2007-07-15

    Malaysia has inherited hundreds of heritage buildings from the past including those from the Indian, Chinese and Colonial eras apart from the indigenous traditional buildings. These buildings have the most unique ecstatic value from the viewpoint of architecture, culture, art, etc. Malaysian economy boom in 1980s spurred the need for more buildings especially in large cities. As a result, most of the historic buildings have been converted and transformed into commercial use. As reported by METP, Malaysian buildings energy uses are reflected by the energy consumption in the industrial and commercial sectors. Most of the buildings' energy consumption is electricity, used for running and operating the plants, lighting, lifts and escalators and other equipment in the buildings. These are amongst the factors that have resulted in the high demand for electricity in Malaysia. As outlined in the eighth Malaysia Plan, Malaysia is taking steps in conserving energy and reducing energy consumption on electricity consumption in building. This paper aims to present the breakdown of the major electricity end uses characteristics of historic buildings in Malaysia. The analysis was performed on annual data, allowing comparison with published benchmarks to give an indication of efficiency. Based on data collected a 'normalisation' calculated electricity consumption was established with the intention of improving the comparison between buildings in different climatic regions or with different occupancy patterns. This is useful for identifying where the design needed further attention and helped pinpoint problem areas within a building. It is anticipated that this study would give a good indication on the electricity consumption characteristics of historic buildings in Malaysia. (Author)

  17. Actual energy consumption in dwellings. The effect of energy performance regulations and occupant behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Guerra Santin, O.

    2010-10-19

    Residential buildings have continuously improved in energy efficiency, partly as a consequence of the introduction of energy regulations in many countries. Although better thermal properties and systems efficiency have lowered energy consumption for space heating in recent decades, substantial differences in energy consumption in similar dwellings are still being observed. These differences in consumption are thought to be caused by differences in occupancy patterns, by quality of construction and by rebound effects. This research addresses the effect of energy performance regulations and occupant behavior on energy consumption for space and water heating in dwellings built after the introduction of the energy performance regulations in the Netherlands. The results of this research show that improving the energy efficiency of buildings alone is not enough to decrease that energy consumption. The large differences found in the use of dwellings indicate that, especially in energy efficient houses, occupant behavior provides an opportunity for further reductions in the energy consumption for space heating which could boost the efforts to conserve energy worldwide.

  18. Energy consumption and economic growth on the focus on nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Ozkan, Filiz [Sakarya Univ., Sakarya (Turkey). Dept. of Financial Econometric; Pektas, Ali Osman [Bahcesehir Univ., Istanbul (Turkey). Dept. of Civil Engineering; Ozkan, Omer [Istanbul Medeniyet Univ. (Turkey). Dept. of Civil Engineering

    2017-01-15

    Since the quest for global and personal prosperity, the drive to eradicate poverty and the motivation to ensure sustainability for the world are collectively dependent on a supply of safe, emissions-free power there are many studies in literature focuses on the relationship between economic growth and energy consumption. This study tries to enlarge the dimensions of these researches by using a large dataset. The second aim of this study is to focus on Nuclear energy consumption. According to the empirical results of the study, Energy consumption is found as co-integrated with the GDP in all 55 countries. There exist bidirectional causality between nuclear, renewable energy consumption and the GDP. Additionally, the unidirectional causality extends from economic growth to hydroelectric, petroleum, coal and total energy consumption.

  19. Energy drink consumption and impact on caffeine risk.

    Science.gov (United States)

    Thomson, Barbara M; Campbell, Donald M; Cressey, Peter; Egan, Ursula; Horn, Beverley

    2014-01-01

    The impact of caffeine from energy drinks occurs against a background exposure from naturally occurring caffeine (coffee, tea, cocoa and foods containing these ingredients) and caffeinated beverages (kola-type soft drinks). Background caffeine exposure, excluding energy drinks, was assessed for six New Zealand population groups aged 15 years and over (n = 4503) by combining concentration data for 53 caffeine-containing foods with consumption information from the 2008/09 New Zealand Adult Nutrition Survey (ANS). Caffeine exposure for those who consumed energy drinks (n = 138) was similarly assessed, with inclusion of energy drinks. Forty-seven energy drink products were identified on the New Zealand market in 2010. Product volumes ranged from 30 to 600 ml per unit, resulting in exposures of 10-300 mg caffeine per retail unit consumed. A small percentage, 3.1%, of New Zealanders reported consuming energy drinks, with most energy drink consumers (110/138) drinking one serving per 24 h. The maximum number of energy drinks consumed per 24 h was 14 (total caffeine of 390 mg). A high degree of brand loyalty was evident. Since only a minor proportion of New Zealanders reported consuming energy drinks, a greater number of New Zealanders exceeded a potentially adverse effect level (AEL) of 3 mg kg(-1) bw day(-1) for caffeine from caffeine-containing foods than from energy drinks. Energy drink consumption is not a risk at a population level because of the low prevalence of consumption. At an individual level, however, teenagers, adults (20-64 years) and females (16-44 years) were more likely to exceed the AEL by consuming energy drinks in combination with caffeine-containing foods.

  20. Analysis of energy consumption in single family houses

    DEFF Research Database (Denmark)

    Nielsen, Henrik Aalborg; Mortensen, Stig Bousgaard; Bacher, Peder

    2010-01-01

    This article deals with estimation of the thermal characteristics of single family houses based on measurements of energy consumption and climate. The thermal characteristics includes the response of the building to changes in temperature (UA-value), solar radiation (gA-value), and wind (w...... to estimate the dynamic effects averages with a sample period around 4 hours are required. Also, it is beneficial to use measurements of the total energy consumption (heat and electricity). However, in most cases it results in adequate estimates if only the heat consumption is used as the response variable...... even for houses where a wood burning stove is being used. The article includes a short outline of how the methods could be integrated in an inter- active service such as “My E-Home” minbolig.elsparefonden.dk....

  1. Energy Consumption of Insulated Material Using Thermal Effect Analysis

    OpenAIRE

    Fadzil M. A.; Norliyati M. A.; Hilmi M. A.; Ridzuan A. R.; Wan Ibrahim M. H.; Assrul R. Z.

    2017-01-01

    Wall is one of the structures elements that resist direct heat from the atmosphere. Modification on several structures is relevance to reduce filtrate thermal movement on wall. Insulation material seems to be suitable to be implemented since its purpose meets the heat resistance requirement. Insulation material applied as to generate positive impact in energy saving through reduction in total building energy consumption. Fiberglass is one of the insulation materials that can be used to insula...

  2. High-efficiency pumps drastically reduce energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2002-05-01

    Wilo's Stratos pumps for air conditioning and other domestic heating applications combine the advantages of wet runner technology with an innovative electronic commutator motor. The energy consumption of these high-efficiency pumps is halved compared with similar wet runner designs. With vast numbers of pumps used in buildings across Europe alone, the adoption of this technology potentially offers significant energy sayings. (Author)

  3. Energy Consumption of Wireless IoT Nodes

    OpenAIRE

    Hussain, Amen

    2017-01-01

    The Internet of Things (IoT) is an emerging technology, encompassing a wide spectrum of applications related to industrial control, smart metering, home automation, agriculture, eHealth and so on. For these applications to run autonomously, the IoT devices are required to survive for months and years under strict energy constraints. When developing such applications, it is important for the application to know about its own energy consumption. In this work, we propose and evaluate an ener...

  4. Methods for Reducing the Energy Consumption of Mobile Broadband Networks

    DEFF Research Database (Denmark)

    Micallef, Gilbert

    2010-01-01

    Up until recently, very little consideration has been given towards reducing the energy consumption of the networks supporting mobile communication. This has now become an important issue since with the predicted boost in traffic, network operators are required to upgrade and extend their networks...

  5. Widening the scope? How intermediary actors can shape energy consumption

    DEFF Research Database (Denmark)

    Maneschi, Davide

    2013-01-01

    of the roles and functions of intermediaries is highlighted. The relevance and efficacy of employing the concept of intermediaries are also discussed based on the case study. Above all, it is proposed that research dealing with energy consumption should not limit itself to study factors and practices...

  6. Toward the Design of an Energy Consumption Feedback System

    NARCIS (Netherlands)

    Beltman, Suzanne; Vosslamber, Suzanne Maj; Molderink, Albert; Noordzij, Matthijs Leendert

    2016-01-01

    In this article, we examine two novel issues in user requirements analysis for a feedback system on household energy consumption: (a) microgeneration and (b) the “Must, Should, Could, Won’t have” (MoSCoW) method. We report on a qualitative user requirements analysis using the MoSCoW method for the

  7. Energy consumption of auxiliary systems of electric cars

    Directory of Open Access Journals (Sweden)

    Evtimov Ivan

    2017-01-01

    Full Text Available The paper analyzes the power demand of the auxiliary systems of electric cars. On the basis of existing electric cars an analysis of energy consumption of different auxiliary systems is done. As a result possibilities for rational use of these systems have been proposed, which can increase the mileage per one charge of the battery.

  8. Page 1 Industrial and domestic energy consumption in Nellore ...

    Indian Academy of Sciences (India)

    Industrial and domestic energy consumption in Nellore villages 325. Table 8. Willage industrial data. Time for Area. - operation Period of Operationſ covered Villages Population. Industry (hr) operation year (km”) covered covered. º Potteries at - i) Balijapalyam 6 January–August 10(12)" 9:0 15 3000 ... ii) Kummarimitta - 5 ...

  9. Evaluation of energy consumption in different drying methods

    Energy Technology Data Exchange (ETDEWEB)

    Motevali, Ali; Minaei, Saeid; Khoshtagaza, Mohammad Hadi [Department of Agricultural Machinery Engineering, Agricultural Faculty, Tarbiat Modares University, Tehran 14115-111 (Iran, Islamic Republic of)

    2011-02-15

    This study was conducted to evaluate energy consumption in various drying systems including hot-air convection, use of microwave pretreatment with convection dryer, microwave drying, vacuum drying and infrared drying. Tests were conducted using pomegranate arils under various experimental conditions as follows. In convection dryer at six temperature levels (45, 50, 55, 60, 65 and 70 C) and three air velocity levels (0.5, 1 and 1.5 m/s) at three pretreatments of control, 100 W microwave pretreatment for 20 min and 200 W microwave pretreatment for 10 min. Experiments in the microwave dryer were done at three power levels of 100, 200 and 300 W and in vacuum dryer at five temperature levels (50, 60, 70, 80, and 90 C) under 250 kPa pressure. For infrared drying, there were four air velocity levels (0.3, 0.5, 0.7 and 1 m/s) and three illumination levels (0.22, 0.31 and 0.49 W/cm{sup 2}). Experimental results showed that minimum and maximum energy consumption in pomegranate drying were associated with microwave and vacuum dryers, respectively. The use of microwave pretreatment in drying pomegranate arils in hot air dryer decreased drying time and energy consumption in comparison with pure convection drying. In infrared drying, it was found that drying time increased with air velocity which resulted in increased energy consumption. (author)

  10. Questionnaire survey, Indoor climate measurements and Energy consumption

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Thomsen, Kirsten Engelund; Mørck, Ove

    2012-01-01

    . This report presents part of the results of an evaluation of the project that was performed in the settlement. The evaluation consisted of a questionnaire survey of occupant experiences and satisfaction in 35 single-family houses, measurements of energy consumption in 22 selected single-family houses and 58...

  11. Efficiency of Energy Consumption as a Base for Sustainable Energy Sector

    OpenAIRE

    Anicetas Ignotas; Viktorija Stasytytė

    2016-01-01

    Lithuania, as many other EU countries, encounters key challenges in three energy sector fields: energy independence, energy sector competitiveness and sustainable energy sector development. Such situation is determined by historical and political conditions, as well as by limited internal energy resources. In such context an importance of energy consumption efficiency pursuing country energy sector sustainability is highlighted. By implementing the long-term goals and tasks a country may seek...

  12. A Low Power Consumption Algorithm for Efficient Energy Consumption in ZigBee Motes.

    Science.gov (United States)

    Vaquerizo-Hdez, Daniel; Muñoz, Pablo; R-Moreno, María D; F Barrero, David

    2017-09-22

    Wireless Sensor Networks (WSNs) are becoming increasingly popular since they can gather information from different locations without wires. This advantage is exploited in applications such as robotic systems, telecare, domotic or smart cities, among others. To gain independence from the electricity grid, WSNs devices are equipped with batteries, therefore their operational time is determined by the time that the batteries can power on the device. As a consequence, engineers must consider low energy consumption as a critical objective to design WSNs. Several approaches can be taken to make efficient use of energy in WSNs, for instance low-duty-cycling sensor networks (LDC-WSN). Based on the LDC-WSNs, we present LOKA, a LOw power Konsumption Algorithm to minimize WSNs energy consumption using different power modes in a sensor mote. The contribution of the work is a novel algorithm called LOKA that implements two duty-cycling mechanisms using the end-device of the ZigBee protocol (of the Application Support Sublayer) and an external microcontroller (Cortex M0+) in order to minimize the energy consumption of a delay tolerant networking. Experiments show that using LOKA, the energy required by the sensor device is reduced to half with respect to the same sensor device without using LOKA.

  13. A Low Power Consumption Algorithm for Efficient Energy Consumption in ZigBee Motes

    Directory of Open Access Journals (Sweden)

    Daniel Vaquerizo-Hdez

    2017-09-01

    Full Text Available Wireless Sensor Networks (WSNs are becoming increasingly popular since they can gather information from different locations without wires. This advantage is exploited in applications such as robotic systems, telecare, domotic or smart cities, among others. To gain independence from the electricity grid, WSNs devices are equipped with batteries, therefore their operational time is determined by the time that the batteries can power on the device. As a consequence, engineers must consider low energy consumption as a critical objective to design WSNs. Several approaches can be taken to make efficient use of energy in WSNs, for instance low-duty-cycling sensor networks (LDC-WSN. Based on the LDC-WSNs, we present LOKA, a LOw power Konsumption Algorithm to minimize WSNs energy consumption using different power modes in a sensor mote. The contribution of the work is a novel algorithm called LOKA that implements two duty-cycling mechanisms using the end-device of the ZigBee protocol (of the Application Support Sublayer and an external microcontroller (Cortex M0+ in order to minimize the energy consumption of a delay tolerant networking. Experiments show that using LOKA, the energy required by the sensor device is reduced to half with respect to the same sensor device without using LOKA.

  14. Building and occupant characteristics as determinants of residential energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Nieves, A.L.

    1981-10-01

    The major goals of the research are to gain insight into the probable effects of building energy performance standards on energy consumption; to obtain observations of actual residential energy consumption that could affirm or disaffirm comsumption estimates of the DOE 2.0A simulation model; and to investigate home owner's conservation investments and home purchase decisions. The first chapter covers the investigation of determinants of household energy consumption. The presentation begins with the underlying economic theory and its implications, and continues with a description of the data collection procedures, the formulation of variables, and then of data analysis and findings. In the second chapter the assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation. The third chapter contains information regarding households' willingness to make energy conserving investments and their ranking of various conservation features. In the final chapter conclusions and recommendations are presented with an emphasis on the policy implications of this study. (MCW)

  15. A survey of energy-drink consumption among medical students.

    Science.gov (United States)

    Hidiroglu, Seyhan; Tanriover, Ozlem; Unaldi, Sule; Sulun, Serdar; Karavus, Melda

    2013-07-01

    To determine the frequency and pattern of energy drink consumption among medical school students, their knowledge of its effects and side effects and to see its relation with alcohol and cigarette usage. The descriptive analytical study was conducted at Marmara University Medical School, Istanbul, Turkey from October 2011 and January 2012. A semi-structured questionnaire was filled by students who were asked about their socio-demographic status and their energy drink consumption. SPSS 12 was used for statistical analysis. The mean age of the 390 students in the study was 20.98+/-1.96 years (range:16-27). Of them, 204 (52.3%) were females and 186 (47.7%) were males. Overall 52(13.3%) were smoking regularly at least one cigarette per day; 122(31.3%) were consuming alcohol; 127 (32.6%) had consumed energy drinks at least once and 73(18.8%)more than once. In terms of perception, 110(28.2%) students said energy drinks were similar to sports drinks, while only 121(41.1%) named the brands correctly; 96 (24.6%) students did not answer this particular question. Although consumption of energy drinks was common among medical students, the knowledge of ingredients and knowledge of health risks of energy drinks among them was unsatisfactory.

  16. Final Energy Consumption Trends and Drivers in Czech Republic and Latvia

    OpenAIRE

    Zhiqian Yu; Dalia Streimikiene; Tomas Balezentis; Rimantas Dapkus; Radislav Jovovic; Veselin Draskovic

    2017-01-01

    This paper analyses the trends of final energy consumption in Latvia and Czech Republic. Analysis of final energy consumption during 2000-2013 period indicated the main driving forces of final energy consumption during and after world financial crisis of 2008. The paper aimed to evaluate the impact of economic activity and other factors on final energy consumption. The decomposition of the final energy consumption is assessed by analyzing effect of different drivers by the main end-users sect...

  17. Energy Drink Consumption: Beneficial and Adverse Health Effects.

    Science.gov (United States)

    Alsunni, Ahmed Abdulrahman

    2015-10-01

    Consumption of energy drinks has been increasing dramatically in the last two decades, particularly amongst adolescents and young adults. Energy drinks are aggressively marketed with the claim that these products give an energy boost to improve physical and cognitive performance. However, studies supporting these claims are limited. In fact, several adverse health effects have been related to energy drink; this has raised the question of whether these beverages are safe. This review was carried out to identify and discuss the published articles that examined the beneficial and adverse health effects related to energy drink. It is concluded that although energy drink may have beneficial effects on physical performance, these products also have possible detrimental health consequences. Marketing of energy drinks should be limited or forbidden until independent research confirms their safety, particularly among adolescents.

  18. Transport energy consumption achievement based on indicator analysis

    Science.gov (United States)

    Jiang, Jian

    2017-06-01

    In order to evaluate the transport sustainability level for regions, the concept of achievement efficiency in transport energy consumption is initially suggested in this paper. The research object is not only for the energy consumption by transport operation but also the whole life of the transport procedure, which is the thought of life cycle assessment. And then, on the quantitative analysis to calculate the transport energy achievement efficiency of the regions, the indicators that can represent the achievement of transport energy consumption are convincingly found out by indicator theory. Next, concentration is focused on the transport related indicators and proper indicators are picked up from the candidate indicators, which were the affecting factors to this issue. After that, using the selected indicators, we introduce the method of data envelopment analysis to do quantitative analysis, which helps to get the achievement efficiency of transport energy among cities all over the world. The analysis result shows the efficient regions and the inefficient regions respectively. Furthermore, the detailed efficiency value of each region is also laid out clearly. For the improvement, the inadequate output or input variables of the inefficient regions were listed compared with the efficient regions so that corresponding transport policy implications can be resulted for the inefficient regions to reach high level sustainability.

  19. Energy consumption in buildings and female thermal demand

    Science.gov (United States)

    Kingma, Boris; van Marken Lichtenbelt, Wouter

    2015-12-01

    Energy consumption of residential buildings and offices adds up to about 30% of total carbon dioxide emissions; and occupant behaviour contributes to 80% of the variation in energy consumption. Indoor climate regulations are based on an empirical thermal comfort model that was developed in the 1960s (ref. ). Standard values for one of its primary variables--metabolic rate--are based on an average male, and may overestimate female metabolic rate by up to 35% (ref. ). This may cause buildings to be intrinsically non-energy-efficient in providing comfort to females. Therefore, we make a case to use actual metabolic rates. Moreover, with a biophysical analysis we illustrate the effect of miscalculating metabolic rate on female thermal demand. The approach is fundamentally different from current empirical thermal comfort models and builds up predictions from the physical and physiological constraints, rather than statistical association to thermal comfort. It provides a substantiation of the thermal comfort standard on the population level and adds flexibility to predict thermal demand of subpopulations and individuals. Ultimately, an accurate representation of thermal demand of all occupants leads to actual energy consumption predictions and real energy savings of buildings that are designed and operated by the buildings services community.

  20. Minimizing the Energy Consumption in ‎Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Mohammed Saad Talib

    2017-12-01

    Full Text Available Energy in Wireless Sensor networks (WSNs represents an essential factor in designing, controlling and operating the sensor networks. Minimizing the consumed energy in WSNs application is a crucial issue for the network effectiveness and efficiency in terms of lifetime, cost and operation. Number of algorithms and protocols were proposed and implemented to decrease the energy consumption. WSNs operate with battery powered sensors. Sensors batteries have not easily rechargeable even though having restricted power. Frequently the network failure occurs due to the sensors energy insufficiency. MAC protocols in WSNs achieved low duty-cycle by employing periodic sleep and wakeup. Predictive Wakeup MAC (PW-MAC protocol was made use of the asynchronous duty cycling. It reduces the consumption of the node energy by allowing the senders to predict the receiver′s wakeup times. The WSN must be applied in an efficient manner to utilize the sensor nodes and their energy to ensure efficient network throughput. Prediction of the WSN lifetime previously to its installation represents a significant concern. To ensure energy efficiency the sensors duty cycles must be adjusted appropriately to meet the network traffic demands. The energy consumed in each node due to its switching between the active and the idle states were also estimated. The sensors are assumed to be randomly deployed. This paper aims to improve the randomly deployed network lifetime by scheduling the effects of transmission, reception and sleep states on the sensor node energy consumption. Results for these states with many performance metrics were also studied and discussed

  1. Energy Consumption in Rural China: Analysis of Rural Living Energy in Beijing

    Science.gov (United States)

    Yang, Yu; Yifang, Liu; Wei, Zhu

    2017-08-01

    Under the pressure of climate change and international carbon reduction targets, long-neglected rural energy consumption needs to be given high priority. China’s rural energy consumption structure is in the transition from non-commercial to commercial sources, and rural energy has become a key determinant to slow down the carbon emission growth. This paper systematically calibrates the current situation of rural energy consumption in Beijing by using the survey data of 1866 households in 13 districts and counties in Beijing based on the trend of energy supply and demand change in China. To this end, the paper combines rural policy measures to assess the pressure on coal-burning and clean energy supply trends, puts forward the rural energy structure adjustment path, with a view to promoting the use of clean energy in rural areas and reduce the environmental consequences of coal-burning.

  2. An analysis of residential energy consumption in a temperate climate

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Y.Y.; Vincent, W.

    1987-06-01

    Electrical energy consumption data have been recorded for several hundred submetered residential structures in Middle Tennessee. All houses were constructed with a common energy package.'' Specifically, daily cooling usage data have been collected for 130 houses for the 1985 and 1986 cooling seasons, and monthly heating usage data for 186 houses have been recorded by occupant participation over a seven-year period. Cooling data have been analyzed using an SPSSx multiple regression analysis and results are compared to several cooling models. Heating, base, and total energy usage are also analyzed and regression correlation coefficients are determined as a function of several house parameters.

  3. Impact of external conditions on energy consumption in industrial halls

    Science.gov (United States)

    Żabnieńśka-Góra, Alina

    2017-11-01

    The energy demand for heating the halls buildings is high. The impact on this may have the technology of production, building construction and technology requirements (HVAC systems). The isolation of the external partitions, the location of the object in relation to the surrounding buildings and the degree of the interior insolation (windows and skylights) are important in the context of energy consumption. The article discusses the impact of external conditions, wind and sunlight on energy demand in the industrial hall. The building model was prepared in IDA ICE 4.0 simulation software. Model validation was done based on measurements taken in the analyzed building.

  4. TV Energy Consumption Trends and Energy-Efficiency Improvement Options

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

    2011-07-01

    The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in January 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden

  5. Predicting the Specific Energy Consumption of Reverse Osmosis Desalination

    Directory of Open Access Journals (Sweden)

    Ashlynn S. Stillwell

    2016-12-01

    Full Text Available Desalination is often considered an approach for mitigating water stress. Despite the abundance of saline water worldwide, additional energy consumption and increased costs present barriers to widespread deployment of desalination as a municipal water supply. Specific energy consumption (SEC is a common measure of the energy use in desalination processes, and depends on many operational and water quality factors. We completed multiple linear regression and relative importance statistical analyses of factors affecting SEC using both small-scale meta-data and municipal-scale empirical data to predict the energy consumption of desalination. Statistically significant results show water quality and initial year of operations to be significant and important factors in estimating SEC, explaining over 80% of the variation in SEC. More recent initial year of operations, lower salinity raw water, and higher salinity product water accurately predict lower values of SEC. Economic analysis revealed a weak statistical relationship between SEC and cost of water production. Analysis of associated greenhouse gas (GHG emissions revealed important considerations of both electricity source and SEC in estimating the GHG-related sustainability of desalination. Results of our statistical analyses can aid decision-makers by predicting the SEC of desalination to a reasonable degree of accuracy with limited data.

  6. Energy consumption quota management of Wanda commercial buildings in China

    Science.gov (United States)

    Sun, D. B.; Xiao, H.; Wang, X.; Liu, J. J.; Wang, X.; Jin, X. Q.; Wang, J.; Xie, X. K.

    2016-08-01

    There is limited research of commercial buildings’ energy use data conducted based on practical analysis in China nowadays. Some energy consumption quota tools like Energy Star in U.S or VDI 3807 in Germany have limitation in China's building sector. This study introduces an innovative methodology of applying energy use quota model and empirical management to commercial buildings, which was in accordance of more than one hundred opened shopping centers of a real estate group in China. On the basis of statistical benchmarking, a new concept of “Modified coefficient”, which considers weather, occupancy, business layout, operation schedule and HVAC efficiency, is originally introduced in this paper. Our study shows that the average energy use quota increases from north to south. The average energy use quota of sample buildings is 159 kWh/(m2.a) of severe cold climate zone, 179 kWh/(m2.a) of cold zone, 188 kWh/(m2.a) of hot summer and cold winter zone, and 200 kWh/(m2.a) of hot summer and warm winter zone. The energy use quota model has been validated in the property management for year 2016, providing a new method of commercial building energy management to the industry. As a key result, there is 180 million energy saving potential based on energy quota management in 2016, equals to 6.2% saving rate of actual energy use in 2015.

  7. Daily temperature integration: a simulation study to quantify energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, O. [The Royal Veterinary and Agricultural University, Taastrup (Denmark). Department of Agricultural Sciences, Section Horticulture; Bakker, M.J.; Heuvelink, E. [Wageningen University (Netherlands). Department of Plant Sciences, Horticultural Production Chains Group

    2004-03-01

    A combined greenhouse climate and control model was used to study energy consumption in year-round cut chrysanthemum. Temperature was either controlled for energy saving with temperature integration within 24 h using the margin between heating and ventilation temperature b as control (TI) or the temperature integration regime was restricted within 24 h by a set point for negative temperature difference between average day and average night temperature T{sub DIF} to attain a temperature regime for stem length control (TI{sub DIF}). Energy consumption was reduced by both regimes compared to a standard regime according to commercial practice when heating in winter was shifted to nighttime using a screen. With increasing weather fluctuations in spring and autumn, weekly energy consumption could decrease by more than 60% for TI with {+-}6{sup o}C temperature bandwidth. With TI{sub DIF} in the same period, only 37 or 17% (T{sub DIF} of -6 and -12{sup o}C, respectively) less energy was used than with a standard recommended climate regime (TP). In general, TI{sub DIF} reduced energy demand compared to TP, but energy saving was higher with TI. In deciding whether to apply either TI or TI{sub DIF}, the actual cultivation period is the most important criterion. Controlling stem length with a negative temperature difference in spring and autumn has the highest additional costs, control with almost no negative day to night temperature difference is possible in summer; during winter, both temperature control regimes result in an almost similar greenhouse climate. (author)

  8. Energy drink consumption and increased risk for alcohol dependence

    Science.gov (United States)

    Arria, Amelia M.; Caldeira, Kimberly M.; Kasperski, Sarah J.; Vincent, Kathryn B.; Griffiths, Roland R.; O'Grady, Kevin E.

    2010-01-01

    Background Energy drinks are highly caffeinated beverages that are increasingly consumed by young adults. Prior research has established associations between energy drink use and heavier drinking and alcohol-related problems among college students. This study investigated the extent to which energy drink use might pose additional risk for alcohol dependence over and above that from known risk factors. Methods Data were collected via personal interview from 1,097 fourth-year college students sampled from one large public university as part of an ongoing longitudinal study. Alcohol dependence was measured with DSM-IV criteria. Results After adjustment for the sampling design, 51.3%wt of students were classified as “low-frequency” energy drink users (1 to 51 days in the past year) and 10.1%wt as “high-frequency” users (≥52 days). Typical caffeine consumption varied widely depending on the brand consumed. Compared to the low-frequency group, high-frequency users drank alcohol more frequently (141.6 vs. 103.1 days) and in higher quantities (6.15 vs. 4.64 drinks/typical drinking day). High-frequency users were at significantly greater risk for alcohol dependence relative to both non-users (AOR=2.40, 95% CI=1.27-4.56, p=.007) and low-frequency users (AOR=1.86, 95% CI=1.10, 3.14, p=.020), even after holding constant demographics, typical alcohol consumption, fraternity/sorority involvement, depressive symptoms, parental history of alcohol/drug problems, and childhood conduct problems. Low-frequency energy drink users did not differ from non-users on their risk for alcohol dependence. Conclusions Weekly or daily energy drink consumption is strongly associated with alcohol dependence. Further research is warranted to understand the possible mechanisms underlying this association. College students who frequently consume energy drinks represent an important target population for alcohol prevention. PMID:21073486

  9. Energy drink consumption and increased risk for alcohol dependence.

    Science.gov (United States)

    Arria, Amelia M; Caldeira, Kimberly M; Kasperski, Sarah J; Vincent, Kathryn B; Griffiths, Roland R; O'Grady, Kevin E

    2011-02-01

    Energy drinks are highly caffeinated beverages that are increasingly consumed by young adults. Prior research has established associations between energy drink use and heavier drinking and alcohol-related problems among college students. This study investigated the extent to which energy drink use might pose additional risk for alcohol dependence over and above that from known risk factors. Data were collected via personal interview from 1,097 fourth-year college students sampled from 1 large public university as part of an ongoing longitudinal study. Alcohol dependence was assessed according to DSM-IV criteria. After adjustment for the sampling design, 51.3%(wt) of students were classified as "low-frequency" energy drink users (1 to 51 days in the past year) and 10.1%(wt) as "high-frequency" users (≥52 days). Typical caffeine consumption varied widely depending on the brand consumed. Compared to the low-frequency group, high-frequency users drank alcohol more frequently (141.6 vs. 103.1 days) and in higher quantities (6.15 vs. 4.64 drinks/typical drinking day). High-frequency users were at significantly greater risk for alcohol dependence relative to both nonusers (AOR = 2.40, 95% CI = 1.27 to 4.56, p = 0.007) and low-frequency users (AOR = 1.86, 95% CI = 1.10, 3.14, p = 0.020), even after holding constant demographics, typical alcohol consumption, fraternity/sorority involvement, depressive symptoms, parental history of alcohol/drug problems, and childhood conduct problems. Low-frequency energy drink users did not differ from nonusers on their risk for alcohol dependence. Weekly or daily energy drink consumption is strongly associated with alcohol dependence. Further research is warranted to understand the possible mechanisms underlying this association. College students who frequently consume energy drinks represent an important target population for alcohol prevention. Copyright © 2010 by the Research Society on Alcoholism.

  10. Energy Consumption Trends in Energy Scarce and Rich Countries: Comparative Study for Pakistan and Saudi Arabia

    Science.gov (United States)

    Gazder, Uneb

    2017-11-01

    Energy crisis is raising serious concerns throughout the world. There has been constant rise in energy consumption corresponding to the increase in global population. This sector affects the other pillars of national economy including industries and transportation. Because of these reasons, the traditional fossil-based energy sources are depleting rapidly, resulting in high and unstable energy prices. Saudi Arabia and Pakistan, although different from each other in terms of their economic stability and political systems, still rely heavily on the traditional fossil fuels. This paper presents the comparison of these two countries in terms of their energy consumption and factors affecting it. These factors include, but not limited to, economic development, and growth in population and other sectors such as; industries, transportation, etc. The comparison is also made with the regional and global energy consumption trends and these countries. Moreover, regression models were built to predict energy consumption till 2040 and compare the growth in this sector and share in global energy demand. Energy consumption in oil-rich countries (Saudi Arabia) has been driven through its economic development, while for energy insecure country (Pakistan) it is mainly because of population growth. It was also found that in the next two decades the share of Pakistan in the global energy demand will increase. This concludes that population growth will have more impact on energy consumption than economic growth. It could mean that the shift in energy sector would shift towards sustenance instead of using energy for commercial or industrial usage. Conference Track: Policy and Finance and Strategies

  11. Building environment assessment and energy consumption estimation using smart phones

    Science.gov (United States)

    Li, Xiangli; Zhang, Li; Jia, Yingqi; Wang, Zihan; Jin, Xin; Zhao, Xuefeng

    2017-04-01

    In this paper, an APP for building indoor environment evaluation and energy consumption estimation based on Android platform is proposed and established. While using the APP, the smart phone built-in sensors are called for real-time monitoring of the building environmental information such as temperature, humidity and noise, etc. the built-in algorithm is developed to calculate the heat and power consumption, and questionnaires, grading and other methods are used to feed back to the space heating system. In addition, with the application of the technology of big data and cloud technology, the data collected by users will be uploaded to the cloud. After the statistics of the uploaded data, regional difference can be obtained, thus providing a more accurate basis for macro-control and research of energy, thermal comfort, greenhouse effect.

  12. Online Anomaly Energy Consumption Detection Using Lambda Architecture

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Iftikhar, Nadeem; Nielsen, Per Sieverts

    2016-01-01

    With the widely use of smart meters in the energy sector, anomaly detection becomes a crucial mean to study the unusual consumption behaviors of customers, and to discover unexpected events of using energy promptly. Detecting consumption anomalies is, essentially, a real-time big data analytics...... problem, which does data mining on a large amount of parallel data streams from smart meters. In this paper, we propose a supervised learning and statistical-based anomaly detection method, and implement a Lambda system using the in-memory distributed computing framework, Spark and its extension Spark...... Streaming. The system supports not only iterative refreshing the detection models from scalable data sets, but also real-time anomaly detection on scalable live data streams. This paper empirically evaluates the system and the detection algorithm, and the results show the effectiveness and the scalability...

  13. FDI, Economic Growth, Energy Consumption & Environmental Nexus in Bangladesh

    Directory of Open Access Journals (Sweden)

    Sandip SARKER

    2016-04-01

    Full Text Available This paper attempts to investigate the relationship among economic growth, energy consumption, CO2 emission, FDI and natural gas usage in Bangladesh through co-integration and Vector Error Correction model (VECM over the period 1978 to 2010. Using ADP unit root tests it is found that all the four variables are integrated in first difference. The Johansen co-integration tests indicate that there is existence of long-run relationship among the variables. The VECM long run causality model indicates that there is a long run causality running from energy consumption and natural gas usage by industrial sector to GDP as well as from CO2 emission to FDI. Likewise in the short run a causal relationships have also been found among the variables. Moreover our model is found be error free based on several statistical test. Our results provide important policy suggestions regarding our foreign direct investment, environmental issues and economic growth nexus in Bangladesh.

  14. Various multistage ensembles for prediction of heating energy consumption

    Directory of Open Access Journals (Sweden)

    Radisa Jovanovic

    2015-04-01

    Full Text Available Feedforward neural network models are created for prediction of daily heating energy consumption of a NTNU university campus Gloshaugen using actual measured data for training and testing. Improvement of prediction accuracy is proposed by using neural network ensemble. Previously trained feed-forward neural networks are first separated into clusters, using k-means algorithm, and then the best network of each cluster is chosen as member of an ensemble. Two conventional averaging methods for obtaining ensemble output are applied; simple and weighted. In order to achieve better prediction results, multistage ensemble is investigated. As second level, adaptive neuro-fuzzy inference system with various clustering and membership functions are used to aggregate the selected ensemble members. Feedforward neural network in second stage is also analyzed. It is shown that using ensemble of neural networks can predict heating energy consumption with better accuracy than the best trained single neural network, while the best results are achieved with multistage ensemble.

  15. Green smartphone GPUs: Optimizing energy consumption using GPUFreq scaling governors

    KAUST Repository

    Ahmad, Enas M.

    2015-10-19

    Modern smartphones are limited by their short battery life. The advancement of the graphical performance is considered as one of the main reasons behind the massive battery drainage in smartphones. In this paper we present a novel implementation of the GPUFreq Scaling Governors, a Dynamic Voltage and Frequency Scaling (DVFS) model implemented in the Android Linux kernel for dynamically scaling smartphone Graphical Processing Units (GPUs). The GPUFreq governors offer users multiple variations and alternatives in controlling the power consumption and performance of their GPUs. We implemented and evaluated our model on a smartphone GPU and measured the energy performance using an external power monitor. The results show that the energy consumption of smartphone GPUs can be significantly reduced with a minor effect on the GPU performance.

  16. A Unified Monitoring Framework for Energy Consumption and Network Traffic

    Directory of Open Access Journals (Sweden)

    Florentin Clouet

    2015-08-01

    Full Text Available Providing experimenters with deep insight about the effects of their experiments is a central feature of testbeds. In this paper, we describe Kwapi, a framework designed in the context of the Grid'5000 testbed, that unifies measurements for both energy consumption and network traffic. Because all measurements are taken at the infrastructure level (using sensors in power and network equipment, using this framework has no dependencies on the experiments themselves. Initially designed for OpenStack infrastructures, the Kwapi framework allows monitoring and reporting of energy consumption of distributed platforms. In this article, we present the extension of Kwapi to network monitoring, and outline how we overcame several challenges: scaling to a testbed the size of Grid'5000 while still providing high-frequency measurements; providing long-term loss-less storage of measurements; handling operational issues when deploying such a tool on a real infrastructure.

  17. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers

    NARCIS (Netherlands)

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.; Van der Meer, T.H.

    2007-01-01

    Gerbens-Leenes, P.W., Hoekstra, A.Y., Van der Meer, T.H., 2007. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers. In: proceedings ‘First World Water Sustainability-Renewable Energy Congress and Exhibition’. 25-28 November 2007, Maastricht, the

  18. Nodes Placement for reducing Energy Consumption in Multimedia Transmissions

    OpenAIRE

    Pace, Pasquale; Loscri, Valeria; Natalizio, Enrico; Razafindralambo, Tahiry

    2011-01-01

    International audience; Power consumption is an essential issue in wireless multimedia sensor networks (WMSNs) due to the elevated processing capabilities requested by the video acquisition hardware installed on the generic sensor node. Hence, node placement scheme in WMSNs greatly impacts the overall network lifetime. In this context, the paper first proposes a suitable hardware architecture to implement a feasible WMS node based on off-the-shelf technology, then it evaluates the energy cons...

  19. Energy consumptions in existing buildings; Les consommations d'energie des batiments existants

    Energy Technology Data Exchange (ETDEWEB)

    Nuss, St. [Ecole Nationale Superieure des Arts et Industries de Strasbourg, 78 - Saint-Remy-Les-Chevreuse (France)]|[Costic, 78 - Sainte Remy les Chevreuses (France)

    2002-05-01

    This document presents a sectoral analysis of the energy consumptions in existing French buildings: 1) - residential sector: social buildings, private dwellings; 2) - tertiary sector: office buildings, hotels, commercial buildings, school buildings, hospitals; 3) - industry; 4) - general status. (J.S.)

  20. Air temperature and energy consumption feedbacks within urbanized areas

    Science.gov (United States)

    Ginzburg, A. S.; Demchenko, P. F.

    2017-09-01

    In the 21st century, the climate of expanding megacities and urbanized areas is increasingly forming and changing under the influence of the growing power consumption of the urban economy. To understand the urban climate dynamic and estimate the energy needs of cities in the 21st century, it is necessary to consider not only global and regional climatic factors, but also the presence of feedback between temperature and energy consumption in urbanized areas. This feedback can be both negative and positive, and their significance depends essentially on the climate and landform of the region, system of electricity and heat supply of a city, and some other factors. This article describes the main factors of formation and development of temperature and energy-consumption feedback within urbanized areas in cold and warm seasons when indoor heating or air conditioning is being used. The role of advection in strengthening and weakening of this feedback is studied. The estimates of the parameter and coefficient of feedback strengthening with the influence of anthropogenic heat fluxes and advection on the urban air temperature are presented.

  1. A survey of energy drink and alcohol mixed with energy drink consumption.

    Science.gov (United States)

    Magnezi, Racheli; Bergman, Lisa Carroll; Grinvald-Fogel, Haya; Cohen, Herman Avner

    2015-01-01

    Energy drink consumption among youth is increasing despite recommendations by the American Academy of Pediatrics to eliminate consumption by youth. This study provides information on consumption of energy drinks and alcohol mixed with energy drinks (AmED) in a sample of Israeli youth and how consumer knowledge about the risks affects consumption rates. The study was conducted in three Tel Aviv public schools, with a total enrollment of 1,253 students in grades 8 through 12. Among them, 802 students completed a 49-item questionnaire about energy drink and AmED consumption, for a 64 % response rate Non-responders included 451 students who were absent or refused to participate. All students in the same school were administered the questionnaire on the same day. Energy drinks are popular among youth (84.2 % have ever drunk). More tenth through twelfth grade students consumed energy drinks than eighth and ninth grade students. Students who began drinking in elementary school (36.8 %) are at elevated risk for current energy drink (P drinking ED at a young age is important. Boys and those who start drinking early have a greater risk of both ED and AmED consumption. The characteristics of early drinkers can help increase awareness of potential at-risk youth, such as junior and senior high school students with less educated or single parents. Risks posed by early use on later energy drink and AmED consumption are concerning. We suggest that parents should limit accessibility. Increased knowledge about acceptable and actual amounts of caffeine in a single product might decrease consumption.

  2. Impact of CBR Traffic on Energy Consumption in MANET

    Science.gov (United States)

    Kabbur Mr., Shridhar; Ahammed, G. F. Ali, Dr.; Banu, Rashma, Dr.

    2017-08-01

    Mobile Ad hoc networks (MANETs) are power constrained since nodes are operated with limited battery supply. If a battery of the node drains, its ability to forward the traffic gets affected results in reduced network lifetime. There has been considerable progress in the battery technology, but not in par with the semiconductor technology. There are various techniques adopt different approach to achieve energy efficiency. The proposed approach uses a cost metric for path selection, which is a function of residual battery and current traffic load at a node. The simulation has been carried out using QualNet simulator. The performance is based on average energy consumption for varying CBR applications.

  3. 75 FR 63404 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

    Science.gov (United States)

    2010-10-15

    ...; ] DEPARTMENT OF ENERGY 10 CFR Parts 433 and 435 RIN 1904-AB96 Fossil Fuel-Generated Energy Consumption... address the reduction of fossil fuel-generated energy consumption in new Federal buildings and Federal... they believe meeting the full fossil fuel-generated energy consumption reduction level is technically...

  4. Global Inequality in Energy Consumption from 1980 to 2010

    Directory of Open Access Journals (Sweden)

    Scott Lawrence

    2013-12-01

    Full Text Available We study the global probability distribution of energy consumption per capita around the world using data from the U.S. Energy Information Administration (EIA for 1980–2010. We find that the Lorenz curves have moved up during this time period, and the Gini coefficient, G, has decreased from 0.66 in 1980 to 0.55 in 2010, indicating a decrease in inequality. The global probability distribution of energy consumption per capita in 2010 is close to the exponential distribution withG = 0:5. We attribute this result to the globalization of the world economy, which mixes the world and brings it closer to the state of maximal entropy. We argue that global energy production is a limited resource that is partitioned among the world population. The most probable partition is the one that maximizes entropy, thus resulting in the exponential distribution function. A consequence of the latter is the law of 1/3: the top 1/3 of the world population consumes 2/3 of produced energy. We also find similar results for the global probability distribution of CO2 emissions per capita.

  5. Integrated Urban System and Energy Consumption Model: Residential Buildings

    Directory of Open Access Journals (Sweden)

    Rocco Papa

    2014-05-01

    Full Text Available This paper describes a segment of research conducted within the project PON 04a2_E Smart Energy Master for the energetic government of the territory conducted by the Department of Civil, Architectural and Environment Engineering, University of Naples "Federico II".  In particular, this article is part of the study carried out for the definition of the comprehension/interpretation model that correlates buildings, city’s activities and users’ behaviour in order to promote energy savings. In detail, this segment of the research wants to define the residential variables to be used in the model. For this purpose a knowledge framework at international level has been defined, to estimate the energy requirements of residential buildings and the identification of a set of parameters, whose variation has a significant influence on the energy consumption of residential buildings.

  6. Solar Adoption and Energy Consumption in the Residential Sector

    Science.gov (United States)

    McAllister, Joseph Andrew

    This dissertation analyzes the energy consumption behavior of residential adopters of solar photovoltaic systems (solar-PV). Based on large data sets from the San Diego region that have been assembled or otherwise acquired by the author, the dissertation quantifies changes in energy consumption after solar-PV installation and determines whether certain household characteristics are correlated with such changes. In doing so, it seeks to answer two related questions: First, "Do residential solar adopters increase or decrease their electricity consumption after they install a solar-PV system?" Assuming that certain categories of residential adopters increase and others decrease, the second question is "Which residential adopters increase and which decrease their consumption and why?" The database that was used to conduct this analysis includes information about 5,243 residential systems in San Diego Gas & Electric's (SDG&E) service territory installed between January 2007 and December 2010. San Diego is a national leader in the installation of small-scale solar-electric systems, with over 12,000 systems in the region installed as of January 2012, or around 14% of the total number installed in California. The author performed detailed characterization of a significant subset of the solar installations in the San Diego region. Assembled data included technical and economic characteristics of the systems themselves; the solar companies that sold and installed them; individual customer electric utility billing data; metered PV production data for a subgroup of these solar systems; and data about the properties where the systems are located. Primarily, the author was able to conduct an electricity consumption analysis at the individual household level for 2,410 PV systems installed in SDG&E service territory between January 2007 and December 2010. This analysis was designed to detect changes in electricity consumption from the pre-solar to the post-installation period. To

  7. Thermal indoor environment and energy consumption in a plus-energy house: cooling season measurements

    DEFF Research Database (Denmark)

    Kazanci, Ongun Berk; Olesen, Bjarne W.

    2015-01-01

    The present study is concerned with the thermal indoor environment and HVAC system energy consumption of a detached, one-story, single family, plus-energy house during a cooling season. The house was located in Denmark and it has been used as a full-scale experimental facility for one year...... indoor environment. For the energy consumption of the HVAC system, air-to-brine heat pump, mixing station and controller of the radiant floor, and the air handling unit were considered. The measurements were analyzed based on the achieved indoor environment category (according to EN 15251...... the floor cooling system) and increasing the ventilation rate provided a better thermal indoor environment but with increased energy consumption. The thermal indoor environment and energy performance of the house can be improved with decreased glazing area, increased thermal mass, installation of solar...

  8. Energy Consumption of Insulated Material Using Thermal Effect Analysis

    Directory of Open Access Journals (Sweden)

    Fadzil M. A.

    2017-01-01

    Full Text Available Wall is one of the structures elements that resist direct heat from the atmosphere. Modification on several structures is relevance to reduce filtrate thermal movement on wall. Insulation material seems to be suitable to be implemented since its purpose meets the heat resistance requirement. Insulation material applied as to generate positive impact in energy saving through reduction in total building energy consumption. Fiberglass is one of the insulation materials that can be used to insulate a space from heat and sound. Fiberglass is flammable insulation material with R Value rated of R-2.9 to R-3.8 which meets the requirement in minimizing heat transfer. Finite element software, ABAQUS v6.13 employed for analyze non insulated wall and other insulated wall with different wall thicknesses. The several calculations related to overall heat movement, total energy consumption per unit area of wall, life cycle cost analysis and determination of optimal insulation thickness is calculated due to show the potential of the implementation in minimize heat transfer and generate potential energy saving in building operation. It is hoped that the study can contribute to better understanding on the potential building wall retrofitting works in increasing building serviceability and creating potential benefits for building owner.

  9. Energy consumption renewable energy development and environmental impact in Algeria - Trend for 2030

    Science.gov (United States)

    Sahnoune, F.; Imessad, K.; Bouakaz, D. M.

    2017-02-01

    The study provides a detailed analysis of the energy production and consumption in Algeria and the associated CO2 emissions. Algeria is an important energy producer (oil and natural gas). The production is currently around 155 MToe. The total primary energy consumption amounted to about 58 MToe equivalent to 1.46 Toe/capita. The energy demand is still increasing, an average annual growth rate of more than 6% per year during the last decade. The growth rate for electricity production was almost twice that of the total energy consumption. In 2015, the installed capacity of the electricity generation plants reached 17.6 GW. Electricity consumption was 64.6 TWh and is expected to reach at least 75 TWh in 2020 and 130 TWh in 2030. The already high electricity demand will double by 2030. In the structure of final energy consumption, the transport sector ranks first (36%), natural gas consumption ranks second (28.5%), followed by electricity production (27.7%). By activity, the energy sector is the main source of CO2 emissions, about ¾ of the total and this sector has the most important potential for mitigation measures. CO2 emissions from this energy sector amounted to 112.2 MT CO2 as follows: 33% transport, 31% electricity production and 26% from natural gas combustion for residential use. The integration of renewable sources in the energy mix represents for Algeria a major challenge. In 2015, Algeria adopted an ambitious program for development of renewable energy. The target is to achieve 22 GW capacity of electricity from renewable by 2030 to reach a rate of 27 % of national electricity generation through renewable sources. By implementing this program, CO2 emissions of power generation will be reduced by more than 18% in 2030.

  10. A study of changing patterns of energy consumption and energy efficiency in the Indian manufacturing sector

    OpenAIRE

    Jena, Pradyot

    2009-01-01

    In the present economic scenario, the key concerns in policy making in India are: how to achieve higher energy efficiency in the key sectors and how to reduce the vulnerability of the economy to external shocks. In this paper, an attempt is made to study the changing pattern of commercial energy consumption in the manufacturing sector, which is the largest user of commercial energy and to identify the alternative energy saving processes through technological upgradation. For this purpose, we ...

  11. Controlled cooling of an electronic system for reduced energy consumption

    Science.gov (United States)

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-08-09

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

  12. Controlled cooling of an electronic system for reduced energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2018-01-30

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

  13. Energy and water consumption of Pacific Northwest irrigation systems

    Energy Technology Data Exchange (ETDEWEB)

    King, L.D.; Wensink, R.B.; Wolfe, J.W.; Shearer, M.N.

    1977-09-01

    Irrigation in the Pacific Northwest is an energy-intensive process which represents a major part of the total energy used in farm level food production. Since 1950, several major developments have precipitated pronounced increases in irrigation energy requirements. For example, the invention of efficient high-lift pumps, labor-saving equipment, new uses for irrigation sprinklers, and profitable cropping patterns have substantially escalated irrigation energy consumption in the Pacific Northwest in the past 25 years. Until recently, energy prices have remained relatively low and constant. The next 25 years will continue to experience advanced irrigation technologies. In addition to technological development, however, the cost of energy and water will certainly rise while their availabilities become increasingly constrained. The depletion of ground water in several parts of the United States could also potentially increase the irrigation burden of the Pacific Northwest. Lastly, parts of the Pacific Northwest water supply are directly convertible to energy via hydroelectric generation. This study proposes to make realistic projections relative to present and future interactions of the above components.

  14. Analysis on energy consumption index system of thermal power plant

    Science.gov (United States)

    Qian, J. B.; Zhang, N.; Li, H. F.

    2017-05-01

    Currently, the increasingly tense situation in the context of resources, energy conservation is a realistic choice to ease the energy constraint contradictions, reduce energy consumption thermal power plants has become an inevitable development direction. And combined with computer network technology to build thermal power “small index” to monitor and optimize the management system, the power plant is the application of information technology and to meet the power requirements of the product market competition. This paper, first described the research status of thermal power saving theory, then attempted to establish the small index system and build “small index” monitoring and optimization management system in thermal power plant. Finally elaborated key issues in the field of small thermal power plant technical and economic indicators to be further studied and resolved.

  15. Design and optimization of zero-energy-consumption based solar energy residential building systems

    Science.gov (United States)

    Zheng, D. L.; Yu, L. J.; Tan, H. W.

    2017-11-01

    Energy consumption of residential buildings has grown fast in recent years, thus raising a challenge on zero energy residential building (ZERB) systems, which aim at substantially reducing energy consumption of residential buildings. Thus, how to facilitate ZERB has become a hot but difficult topic. In the paper, we put forward the overall design principle of ZERB based on analysis of the systems’ energy demand. In particular, the architecture for both schematic design and passive technology is optimized and both energy simulation analysis and energy balancing analysis are implemented, followed by committing the selection of high-efficiency appliance and renewable energy sources for ZERB residential building. In addition, Chinese classical residential building has been investigated in the proposed case, in which several critical aspects such as building optimization, passive design, PV panel and HVAC system integrated with solar water heater, Phase change materials, natural ventilation, etc., have been taken into consideration.

  16. Comfort, Indoor Air Quality, and Energy Consumption in Low Energy Homes

    Energy Technology Data Exchange (ETDEWEB)

    Engelmann, P.; Roth, K.; Tiefenbeck, V.

    2013-01-01

    This report documents the results of an in-depth evaluation of energy consumption and thermal comfort for two potential net zero-energy homes (NZEHs) in Massachusetts, as well as an indoor air quality (IAQ) evaluation performed in conjunction with Lawrence Berkeley National Laboratory (LBNL).

  17. Energy consumption during Refractance Window evaporation of selected berry juices

    Energy Technology Data Exchange (ETDEWEB)

    Nindo, C.I.; Tang, J. [Washington State University, Pullman, WA (United States). Dept. of Biological Systems Engineering; Powers, J.R. [Washington State University, Pullman, WA (United States). Dept. of Food Science and Human Nutrition; Bolland, K. [MCD Technologies, Tacoma, WA (United States)

    2004-07-01

    The Refractance Window evaporator represents a novel concept in the design of evaporation systems for small food processing plants. In this system thermal energy from circulating hot water is transmitted through a plastic sheet to evaporate water from a liquid product flowing concurrently on the top surface of the plastic. The objectives of this study were to investigate the heat transfer characteristics of this evaporator, determine its energy consumption, and capacity at different tilt angles and product flow rates. The system performance was evaluated with tap water, raspberry juice, and blueberry juice and puree as feed. With a direct steam injection heating method, the steam economy ranged from 0.64 to 0.84, while the overall heat transfer coefficient (U) was 666 W m{sup -2} {sup o}C{sup -1}. Under this condition, the highest evaporation capacity was 27.1 kg h{sup -1} m{sup -2} for blueberry juice and 31.8 kg h{sup -1} m{sup -2} for blueberry puree. The energy consumption was 2492-2719 kJ kg{sup -1} of water evaporated. Installation of a shell and tube heat exchanger with better temperature control minimized incidences of boiling and frequent discharge of condensate. The steam economy, highest evaporation rate and overall heat transfer coefficient increased to 0.99, 36.0 kg h{sup -1} m{sup -2} and 733 W m{sup -2} {sup o}C{sup -1}, respectively. [Author].

  18. Efficient Energy Consumption Scheduling: Towards Effective Load Leveling

    Directory of Open Access Journals (Sweden)

    Yuan Hong

    2017-01-01

    Full Text Available Different agents in the smart grid infrastructure (e.g., households, buildings, communities consume energy with their own appliances, which may have adjustable usage schedules over a day, a month, a season or even a year. One of the major objectives of the smart grid is to flatten the demand load of numerous agents (viz. consumers, such that the peak load can be avoided and power supply can feed the demand load at anytime on the grid. To this end, we propose two Energy Consumption Scheduling (ECS problems for the appliances held by different agents at the demand side to effectively facilitate load leveling. Specifically, we mathematically model the ECS problems as Mixed-Integer Programming (MIP problems using the data collected from different agents (e.g., their appliances’ energy consumption in every time slot and the total number of required in-use time slots, specific preferences of the in-use time slots for their appliances. Furthermore, we propose a novel algorithm to efficiently and effectively solve the ECS problems with large-scale inputs (which are NP-hard. The experimental results demonstrate that our approach is significantly more efficient than standard benchmarks, such as CPLEX, while guaranteeing near-optimal outputs.

  19. On-site energy consumption and selected emissions at softwood sawmills in the southwestern United States

    Science.gov (United States)

    Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

    2016-01-01

    Presently there is a lack of information describing US southwestern energy consumption and emissions generated from the sawmilling industry. This article uses a mail survey of softwood sawmills in the states of Arizona, Colorado, and New Mexico to develop a profile of on-site energy consumption and selected emissions for the industry. Energy consumption is...

  20. Influence of Occupants’ Behaviour on the Energy Consumption of Domestic Buildings

    DEFF Research Database (Denmark)

    Brohus, Henrik; Heiselberg, Per; Simonsen, Allan

    2010-01-01

    The present work undertakes a theoretical and empirical study of the influence of occupants’ behaviour on energy consumption of domestic buildings. The calculated energy consumption of a number of almost identical domestic buildings in Denmark is compared with the measured energy consumption...

  1. 76 FR 1037 - Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances and Other...

    Science.gov (United States)

    2011-01-06

    ... Commission 16 CFR Part 305 Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances... Consumption and Water Use of Certain Home Appliances and Other Products Required Under the Energy Policy and... Consumption and Water Use of Certain Home Appliances and Other Products Required Under the Energy Policy and...

  2. 75 FR 66008 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

    Science.gov (United States)

    2010-10-27

    ... Parts 433 and 435 RIN 1904-AB96 Fossil Fuel-Generated Energy Consumption Reduction for New Federal... proposed rulemaking (NOPR) regarding the fossil fuel- generated energy consumption ] requirements for new... regarding the fossil fuel-generated energy consumption requirements for new Federal buildings and major...

  3. The potential for quantitative sociological research on residential energy consumption in Denmark

    DEFF Research Database (Denmark)

    Hansen, Anders Rhiger

    2013-01-01

    sociological analysis into energy consumption, enabling researchers in Denmark to use information on energy consumption derived from the energy-supply companies. Furthermore, I present a preliminary research design that employs both a quantitative sociological perspective and the newly available data on actual...... energy consumption. The research design contains a descriptive analysis of how energy demand differs between different types of households. In my conclusion, I claim that quantitative sociological research on energy consumption has great potential for obtaining more knowledge on energy consumption......In this paper, I begin with a description of how a sociological perspective can be employed to understand energy consumption while taking into account that energy consumption is embedded in everyday social practices. Next, I describe how newly available data enhances the potential of quantitative...

  4. Possible explanations for the gap between calculated and measured energy consumption of new houses

    DEFF Research Database (Denmark)

    Kragh, Jesper; Rose, Jørgen; Knudsen, Henrik N.

    2017-01-01

    consumption, internal heat gains or construction faults, underestimate the actual energy consumption in general? As an example, the registered measured energy consumption for heating and hot water of approximately 800 new houses was compared to the calculated energy demand. The analyzed energy consumption...... based on standard assumptions and the real-life registered measured energy consumption for new houses. It includes an evaluation of the possible impact on the energy demand caused by deviations from the standard assumptions for a series of parameters like indoor temperature, hot water consumption......The overall aim to reduce CO2 emissions has brought the energy requirements for new houses into focus. The question is whether the stepwise tightening of the energy requirements for new houses has had the expected impact on the actual realized energy consumption. In the news media, headlines...

  5. Specific Energy Consumption Prediction Method Based on Machine Tool Power Measurement

    Directory of Open Access Journals (Sweden)

    Guoyong Zhao

    2014-07-01

    Full Text Available Accurate prediction on energy consumption in machining is helpful to evaluate process energy characteristics and choose process methods for energy saving. Specific energy consumption expresses the required energy consumption when cutting unit volume material. The Back Propagation (BP neural network prediction method for specific energy consumption in machining is set up in the paper. The prediction method bases on machine tool power signal measurement by power analyzer and shunt sensors. In the developed BP neural network, the input layer neurons include spindle speed, feed rate, depth of cut and material removal rate; and the output layer neurons includes specific energy consumption in machining. The power signal measurement system is built up in the computer numerical control (CNC milling machine tool, and the prediction method for specific energy consumption is tested with cutting data. The prediction results show that the introduced method is effective to predict specific energy consumption in machining.

  6. Perceived stress, energy drink consumption, and academic performance among college students.

    Science.gov (United States)

    Pettit, Michele L; DeBarr, Kathy A

    2011-01-01

    This study explored relationships regarding perceived stress, energy drink consumption, and academic performance among college students. Participants included 136 undergraduates attending a large southern plains university. Participants completed surveys including items from the Perceived Stress Scale(1) and items to describe energy drink consumption, academic performance, and demographics. Positive correlations existed between participants' perceived stress and energy drink consumption. Participants' energy drink consumption and academic performance were negatively correlated. Freshmen (M = 0.330) and sophomores (M = 0.408) consumed a lower number of energy drinks yesterday than juniors (M = 1.000). Males reported higher means than females for selected energy drink consumption items. Statistically significant interactions existed between gender and year in school for selected energy drink consumption items. Results confirm gender differences in energy drink consumption and illuminate a need for education regarding use of energy drinks in response to perceived stress.

  7. Green Production Technology of the Monomer of Nylon-6: Caprolactam

    Directory of Open Access Journals (Sweden)

    Baoning Zong

    2017-06-01

    Full Text Available After two decades’ endeavor, the Research Institute of Petroleum Processing (RIPP has successfully developed a green caprolactam (CPL production technology. This technology is based on the integration of titanium silicate (TS-1 zeolite with the slurry-bed reactor for the ammoximation of cyclohexanone, the integration of silicalite-1 zeolite with the moving-bed reactor for the gas-phase rearrangement of cyclohexanone oxime, and the integration of an amorphous nickel (Ni catalyst with the magnetically stabilized bed reactor for the purification of caprolactam. The world’s first industrial plant based on this green CPL production technology has been built and possesses a capacity of 200 kt·a−1. Compared with existing technologies, the plant investment is pronouncedly reduced, and the nitrogen (N atom utilization is drastically improved. The waste emission is reduced significantly; for example, no ammonium sulfate byproduct is produced. As a result, the price difference between CPL and benzene drops. In 2015, the capacity of the green CPL production technology reached 3 × 106 t·a−1, making China the world’s largest CPL producer, with a global market share exceeding 50%.

  8. Living Behavior and Energy Consumption of Female Junior College Students

    OpenAIRE

    "岩田,浩子/西田,香央里"; "イワタ,ヒロコ/ニシダ,カオリ"; "IWATA,Hiroko/NISHIDA,Kaori"

    1999-01-01

    "This study was carried out to determine the relationship between the living behavior and the amount of energy consumption in daily life of junior college students during summer. The sample employed in this study was the time-study data on 188 days that were received from 94 female junior college students who chose two days and recorded their time-use of twenty-four hours for each day. The basal metabolic rate was calculated based on the age and the body surface area of each student using her...

  9. Sample design for the residential energy consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

  10. Applying Smart Grid Technology For Reducing Electric Energy Consumption

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, Roy

    2010-09-15

    In recent years the term 'Smart Grid' has become a widely used buzz word with respect to the operation of Electric Power Systems. One analysis has suggested that a Smart Grid could potentially reduce annual energy consumption in the USA by 56 to 203 billion kWh in 2030, corresponding to a 1.2 to 4.3% reduction in projected retail electricity sales in 2030. This paper discusses some of the smart grid technologies pertaining to the operation of electric power distribution networks.

  11. Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely-Low Energy Consumption Electronics

    Science.gov (United States)

    2015-12-17

    technical report 3. DATES COVERED {From - To) Apri 1 1, 2012 - September 30, 2015 4. TITLE AND SUBTITLE Energy-Filtered Tunnel Transistor : A...occurring at room temperature as well as its applications to practical devices such as room-temperature single-electron transistors and ultralow...energy consumption transistors . We have experimentally demonstrated, for the first time, that a quantum well energy level can filter out energetic

  12. The Energy-Growth Nexus in Thailand: Does Trade Openness Boost up Energy Consumption?

    OpenAIRE

    Kyophilavong, Phouphet; Shahbaz, Muhammad; Anwar, Sabeen; Masood, Sameen

    2015-01-01

    The nexus between trade openness and energy demand is hot topic of discussion among academicians and researchers, and numerous studies are available in existing literature while investigating the nexus between trade openness and energy demand. This paper explores the relationship between energy consumption, trade openness and economic growth in case of Thailand. In doing so, we have applied Bayer and Hanck cointegration approach to test whether the long run relationship exists between the var...

  13. Baseline projections of transportation energy consumption by mode: 1981 update

    Energy Technology Data Exchange (ETDEWEB)

    Millar, M; Bunch, J; Vyas, A; Kaplan, M; Knorr, R; Mendiratta, V; Saricks, C

    1982-04-01

    A comprehensive set of activity and energy-demand projections for each of the major transportation modes and submodes is presented. Projections are developed for a business-as-usual scenario, which provides a benchmark for assessing the effects of potential conservation strategies. This baseline scenario assumes a continuation of present trends, including fuel-efficiency improvements likely to result from current efforts of vehicle manufacturers. Because of anticipated changes in fuel efficiency, fuel price, modal shifts, and a lower-than-historic rate of economic growth, projected growth rates in transportation activity and energy consumption depart from historic patterns. The text discusses the factors responsible for this departure, documents the assumptions and methodologies used to develop the modal projections, and compares the projections with other efforts.

  14. Possible technical solutions to reduce energy consumption in audio products

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, K.; Andersen, M.A.E.

    1999-07-01

    In common audio products nearly all the supplied power is dissipated as heat. The major consumers are with almost no exception the power supply and the audio amplifier. This paper is divided in two parts, concentrating on typical efficiency measures for the concepts of today and the possibly technical solutions, by which the overall efficiency can be considerably improved in the future. Traditional power supplies are made using a transformer operating on the mains frequency followed by a linear regulator. These are bulky and the efficiency is only around 40%. Using high frequency switch mode power supplies the size of the power supply can be reduced and the efficiency can be increased to 80-90%. Construction of optimal amplifiers in regard to total energy consumption over life time, can only be accomplished by considering both the general volume control distribution, and the general spectral amplitude distribution of audio signals. The traditional efficiency measure specified at the maximum efficiency level says only very little about the real energy consumption of the audio amplifier. As an example, the theoretical efficiency for at traditional class B amplifier is 78%. Using a new efficiency measure defined on the basis of the approximate volume control distribution, an 50W amplifier example shows an overall efficiency of only 1%. In the paper possible solutions and guidelines to increase the real amplifier efficiency are given. (au)

  15. Forecast errors in IEA-countries' energy consumption

    DEFF Research Database (Denmark)

    Linderoth, Hans

    2002-01-01

    Every year Policy of IEA Countries includes a forecast of the energy consumption in the member countries. Forecasts concerning the years 1985,1990 and 1995 can now be compared to actual values. The second oil crisis resulted in big positive forecast errors. The oil price drop in 1986 did not have...... forecast error is not caused by a relatively small forecast error in all 3 sectors. Udgivelsesdato: JAN......Every year Policy of IEA Countries includes a forecast of the energy consumption in the member countries. Forecasts concerning the years 1985,1990 and 1995 can now be compared to actual values. The second oil crisis resulted in big positive forecast errors. The oil price drop in 1986 did not have...... a similar opposite effect. A correction for economic growth reduces forecast errors during the second oil crisis but not elsewhere. Industry has a relatively big positive error while transportation has a negative forecast error. Even when the forecast error is small, the results are not so "nice" because...

  16. The Factors Influencing Transport Energy Consumption in Urban Areas: a Review

    OpenAIRE

    Rocco Papa; Carmela Gargiulo; Gennaro Angiello

    2014-01-01

    Transport energy consumption accounts for about one third of total energy consumption in EU. Despite significant advances in transport technology and fuel formulation, transport energy consumption has increased in most EU countries over the last three decades. This increase in consumption occurred as a result of factors such as higher car ownership, a growth in automobile use and an increase in vehicle distances traveled. As travel and land-use are a function of one another, it is often hypot...

  17. Energy audit in small wastewater treatment plants: methodology, energy consumption indicators, and lessons learned.

    Science.gov (United States)

    Foladori, P; Vaccari, M; Vitali, F

    2015-01-01

    Energy audits in wastewater treatment plants (WWTPs) reveal large differences in the energy consumption in the various stages, depending also on the indicators used in the audits. This work is aimed at formulating a suitable methodology to perform audits in WWTPs and identifying the most suitable key energy consumption indicators for comparison among different plants and benchmarking. Hydraulic-based stages, stages based on chemical oxygen demand, sludge-based stages and building stages were distinguished in WWTPs and analysed with different energy indicators. Detailed energy audits were carried out on five small WWTPs treating less than 10,000 population equivalent and using continuous data for 2 years. The plants have in common a low designed capacity utilization (52% on average) and equipment oversizing which leads to waste of energy in the absence of controls and inverters (a common situation in small plants). The study confirms that there are several opportunities for reducing energy consumption in small WWTPs: in addition to the pumping of influent wastewater and aeration, small plants demonstrate low energy efficiency in recirculation of settled sludge and in aerobic stabilization. Denitrification above 75% is ensured through intermittent aeration and without recirculation of mixed liquor. Automation in place of manual controls is mandatory in illumination and electrical heating.

  18. Export, Energy Consumption and Economic Growth Inter-Linkages: The Case of Lithuania

    Directory of Open Access Journals (Sweden)

    Dudzevičiūtė Gitana

    2017-10-01

    Full Text Available This paper has aimed to examine the causal relationships between energy consumption – economic growth, export – energy consumption and export – economic growth in Lithuania during the period of 1998 – 2015. Descriptive statistics analysis and econometric techniques have been applied for this purpose. Granger causality test has been used to a time series data set to determine the causality between variables. The results of Granger causality test have shown unidirectional causality running from GDP to energy consumption, from export to GDP and from export to energy consumption. It is obvious that GDP and export play significant roles in accelerating energy consumption in Lithuania. The determination of the causal links between energy consumption – economic growth, export – economic growth and energy consumption – export has provided policy makers with the main insights to formulate future policy directions for sustainable economic development in Lithuania.

  19. Energy-conscious consumption. Information on the relation between consumption of households and the indirect energy consumption; Energiebewust consumeren. Informatie over de relatie tussen huishoudelijke consumptie en het indirecte energiegebruik

    Energy Technology Data Exchange (ETDEWEB)

    Vink, E.J.B.; Versteeg, M.F.; Schmidt, T.

    1998-07-01

    More than 50% of the energy consumption of households in the Netherlands concerns so-called indirect energy consumption, which is the energy, required for the production of consumer products, from the exploitation and transport of raw materials to storage in the shop and recycling of wastes. For the most important product groups the amount of required indirect energy is described. Data on indirect energy consumption are presented as much as possible in coherence with the costs of a product or service. The subjects of the 9 chapters are energy and consumption, food, housing, households, personal care, leisure time activities, traffic and transport, vacation, and facts and figures

  20. Energy efficiency in a water supply system: Energy consumption and CO2 emission

    Directory of Open Access Journals (Sweden)

    Helena M. Ramos

    2010-09-01

    Full Text Available This paper presents important fundamentals associated with water and energy efficiency and highlights the importance of using renewable energy sources. A model of multi-criteria optimization for energy efficiency based on water and environmental management policies, including the preservation of water resources and the control of water pressure and energy consumption through a hybrid energy solution, was developed and applied to a water supply system. The methodology developed includes three solutions: (1 the use of a water turbine in pipe systems where pressures are higher than necessary and pressure-reducing valves are installed, (2 the optimization of pumping operation according to the electricity tariff and water demand, and (3 the use of other renewable energy sources, including a wind turbine, to supply energy to the pumping station, with the remaining energy being sold to the national electric grid. The use of an integrated solution (water and energy proves to be a valuable input for creating benefits from available hydro energy in the water supply system in order to produce clean power, and the use of a wind source allows for the reduction of energy consumption in pumping stations, as well as of the CO2 emission to the atmosphere.

  1. [Inventory of final energy-carbon consumption and its structure in Beijing].

    Science.gov (United States)

    Xing, Fang-fang; Ouyang, Zhi-yun; Wang, Xiao-ke; Duan, Xiao-nan; Zheng, Hua; Miao, Hong

    2007-09-01

    Final energy-carbon consumption by different sectors and fuel types in Beijing from 1995 to 2005 and energy structure were presented according to IPCC reference approach and statistical data. Specific discussion of energy-carbon consumption category of each industry in 2005 was given. From 1995 to 2005, total and per capita final energy-carbon consumption increased respectively by 71.5% and 38.4%, while final energy-carbon consumption intensity descended by 66.2%. The energy-carbon consumption of Industry was the highest and accounted for about 53.0%-68.0% of total energy-carbon consumption (an average of 14.59 Mt), followed by tertiary industry, which accounted for about 15.0%-30.5% (an average of 5.23 Mt). Moreover, compared with 1995, the energy-carbon consumption of urban residential life had increased 2.02 times in 2005. At present, energy-carbon consumption of Industry is still the predominant part, and the adjustment of industrial structure hasn't yet changed its position. The structure of final energy-carbon consumption in Beijing has become steady since 2002. Although energy structure adjustments were conducted, carbon consumption still increased with the increase of energy use.

  2. The challenge to UK energy policy: An ageing population perspective on energy saving measures and consumption

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, Neveen, E-mail: n.hamza@ncl.ac.u [School of Architecture, Planning and Landscape Newcastle University, NE1 7RU (United Kingdom); Gilroy, Rose [School of Architecture, Planning and Landscape Newcastle University, NE1 7RU (United Kingdom)

    2011-02-15

    With a focus on the residential sector, this paper explores the likelihood of the UK government meeting its energy targets. The paper contends that energy policy needs to take into account the interplay of four major factors: an ageing population of increasing diversity; a cultural inclination for older housing much of which is thermally inefficient; levels of fuel poverty; and the inexorable rise of consumer spending on leisure related services and goods. Decisions made by older households (both the poorer and the better off) may be critical to the success of energy policy. Among the better off the changing expectations of the baby boomers, with their predilection for consumption and travel, may have particular impact. The paper concludes that much of the reduction in carbon footprint made by older people's choices in heating and insulation may be offset, not only by increasing domestic thermal comfort, but also potentially by increasing consumables in the home and other consumer lifestyle choices. What could be achieved at best, may be a shift in energy mix. - Research highlights: {yields} An aging society in the UK will not lead to reduction in energy consumption. {yields} Physical ability, housing condition, cultural habits and energy poverty undermine policy. {yields} Rise of home entertainment and consumerism 'Afluenza' increase energy consumption.

  3. Household Energy Consumption Behaviour for Different Demographic Regions in Thailand from 2000 to 2010

    Directory of Open Access Journals (Sweden)

    Tharinya Supasa

    2017-12-01

    Full Text Available Since 1995, the residential sector has been a fast-growing energy consumption sector in Thailand. This sector contributes dramatically to the growth of Thailand’s electricity and oil demand. Our study analysed Thailand’s residential energy consumption characteristics and the seven underlying factors affecting the growth in energy use of five demographic regions using an energy input–output method. Embodied energy decomposition revealed that direct energy consumption accounted for approximately 30% of total residential energy use, whereas indirect energy consumption was at 70%. During the studied period, the growth in indirect energy use for all household groups was primarily the result of higher consumption of ‘commerce’, ‘air transport’, ‘manufacturing’, ‘food and beverages’ and ‘agriculture’ products. Moreover, each influencing driver contributes differently to each household’s growth in energy demand. The number of households was the leading factor that dominated the increases in residential energy use in the Greater Bangkok and Central regions. Growth in residential energy consumption in the Northern, Northeastern and Southern regions was strongly dominated by changes in income per capita. Consumption structure and using energy-efficient products had a moderate impact on all regions’ energy consumption. Thus, our findings provide additional energy-saving strategies to restrain further growth in residential energy demand.

  4. LMDI Decomposition Analysis of Energy Consumption in the Korean Manufacturing Sector

    Directory of Open Access Journals (Sweden)

    Suyi Kim

    2017-02-01

    Full Text Available The energy consumption of Korea’s manufacturing sector has sharply increased over the past 20 years. This paper decomposes the factors influencing energy consumption in this sector using the logarithmic mean Divisia index (LMDI method and analyzes the specific characteristics of energy consumption from 1991 to 2011. The analysis reveals that the activity effect played a major role in increasing energy consumption. While the structure and intensity effects contributed to the reduction in energy consumption, the structure effect was greater than the intensity effect. Over the periods, the effects moved in opposite directions; that is, the structure effect decreased when the intensity effect increased and vice versa. The energy consumption by each industry is decomposed into two factors, activity and intensity effects. The increase of energy consumption due to the activity effect is largest in the petroleum and chemical industry, followed by the primary metal and non-ferrous industry, and the fabricated metal industry. The decrease of energy consumption due to the intensity effect is largest in the fabricated metal industry, followed by the primary metal and non-ferrous industry, and the non-metallic industry. The energy consumption due to intensity effect in the petroleum and chemical industry has risen. To save energy consumption more efficiently for addressing climate change in this sector, industrial restructuring and industry-specific energy saving policies should be introduced.

  5. Industrial consumption of energy survey - summary report of energy use in the Canadian manufacturing sector 1995-2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-12-15

    An Industrial Consumption of Energy (ICE) survey is conducted annually to collect data on the energy use of institutions in Canada's manufacturing sector. It plays a necessary role in monitoring the evolution of energy consumption by manufacturing industries and helping the Office of Energy (OEE) to fulfill Canada's commitment to improving energy conservation and energy efficiency. A number of factors affect energy demand in the manufacturing sector but it is difficult to establish an exhaustive list of them. Certain factors affect total energy demand while others take effect in combination; with the result attributing changes in manufacturing energy consumption to any one specific factor is quite difficult. Energy use data collected by the ICE survey from establishments representing all 21 subsectors of the manufacturing sector (NAICS 31-33) show that there is rapid growth in energy consumption, both as to amounts and energy intensity, in the manufacturing sector.

  6. Stimuli Responsive Poly(Vinyl Caprolactam Gels for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Kummara Madhusudana Rao

    2016-01-01

    Full Text Available Poly(vinyl caprolactam (PNVCL is one of the most important thermoresponsive polymers because it is similar to poly(N-isopropyl acrylamide. PNVCL precipitates from aqueous solutions in a physiological temperature range (32–34 °C. The use of PNVCL instead of PNIPAM is considered advantageous because of the assumed lower toxicity of PNVCL. PNVCL copolymer gels are sensitive to external stimuli, such as temperature and pH; which gives them a wide range of biomedical applications and consequently attracts considerable scientific interest. This review focuses on the recent studies on PNVCL-based stimuli responsive three dimensional hydrogels (macro, micro, and nano for biomedical applications. This review also covers the future outlooks of PNVCL-based gels for biomedical applications, particularly in the drug delivery field.

  7. End use energy consumption data base: transportation sector

    Energy Technology Data Exchange (ETDEWEB)

    Hooker, J.N.; Rose, A.B.; Greene, D.L.

    1980-02-01

    The transportation fuel and energy use estimates developed a Oak Ridge National Laboratory (ORNL) for the End Use Energy Consumption Data Base are documented. The total data base contains estimates of energy use in the United States broken down into many categories within all sectors of the economy: agriculture, mining, construction, manufacturing, commerce, the household, electric utilities, and transportation. The transportation data provided by ORNL generally cover each of the 10 years from 1967 through 1976 (occasionally 1977 and 1978), with omissions in some models. The estimtes are broken down by mode of transport, fuel, region and State, sector of the economy providing transportation, and by the use to which it is put, and, in the case of automobile and bus travel, by the income of the traveler. Fuel types include natural gas, motor and aviation gasoline, residual and diesel oil, liuqefied propane, liquefied butane, and naphtha- and kerosene-type jet engine fuels. Electricity use is also estimated. The mode, fuel, sector, and use categories themselves subsume one, two, or three levels of subcategories, resulting in a very detailed categorization and definitive accounting.

  8. Structural Decomposition Analysis of China’s Industrial Energy Consumption Based on Input-Output Analysis

    Science.gov (United States)

    Huang, X. Y.; Zhou, J. Q.; Wang, Z.; Deng, L. C.; Hong, S.

    2017-05-01

    China is now at a stage of accelerated industrialization and urbanization, with energy-intensive industries contributing a large proportion of economic growth. In this study, we examined industrial energy consumption by decomposition analysis to describe the driving factors of energy consumption in China. Based on input-output (I-O) tables from the World Input-Output Database (WIOD) website and China’s energy use data from 1995 to 2011, we studied the sectorial changes of energy efficiency during the examined period. The results showed that all industries increased their energy efficiency. Energy consumption was decomposed into three factors by the logarithmic mean Divisia index (LMDI) method. The increase in production output was the leading factor that drives up China’s energy consumption. World Trade Organization accession and financial crises had great impact on the energy consumption. Based on these results, a series of energy policy suggestions for decision-makers has been proposed.

  9. Energy consumption in residential building: The effect of appliances and human behaviour

    Science.gov (United States)

    Rahman, K. A.; Hariri, Azian; Leman, A. M.; Yusof, M. Z. M.; Najib, M. N. M.

    2017-04-01

    Electricity is the predominant energy source used in these buildings. Therefore, energy management in residential buildings requires serious attention to ensure the energy consumption in residential building have been managed properly. Currently, the unstable of fuel price give the big impact to electricity price. Due to the issue, consumers require to use electricity more wisely. Using energy efficiently is one of the solution to reduce energy consumption. This paper aims to propose an initiative strategy for energy management system based on an analysis of energy consumption in residential building. The level of energy consumption among the occupants was found by obtaining electricity bills and distributing a questionnaire. A case study was carried out in selected areas in the Southern Zone of Peninsular Malaysia. The results of the study show that energy consumption was significant increased by month and the EEES as one of energy management system was suggested.

  10. Big Data Mining of Energy Time Series for Behavioral Analytics and Energy Consumption Forecasting

    Directory of Open Access Journals (Sweden)

    Shailendra Singh

    2018-02-01

    Full Text Available Responsible, efficient and environmentally aware energy consumption behavior is becoming a necessity for the reliable modern electricity grid. In this paper, we present an intelligent data mining model to analyze, forecast and visualize energy time series to uncover various temporal energy consumption patterns. These patterns define the appliance usage in terms of association with time such as hour of the day, period of the day, weekday, week, month and season of the year as well as appliance-appliance associations in a household, which are key factors to infer and analyze the impact of consumers’ energy consumption behavior and energy forecasting trend. This is challenging since it is not trivial to determine the multiple relationships among different appliances usage from concurrent streams of data. Also, it is difficult to derive accurate relationships between interval-based events where multiple appliance usages persist for some duration. To overcome these challenges, we propose unsupervised data clustering and frequent pattern mining analysis on energy time series, and Bayesian network prediction for energy usage forecasting. We perform extensive experiments using real-world context-rich smart meter datasets. The accuracy results of identifying appliance usage patterns using the proposed model outperformed Support Vector Machine (SVM and Multi-Layer Perceptron (MLP at each stage while attaining a combined accuracy of 81.82%, 85.90%, 89.58% for 25%, 50% and 75% of the training data size respectively. Moreover, we achieved energy consumption forecast accuracies of 81.89% for short-term (hourly and 75.88%, 79.23%, 74.74%, and 72.81% for the long-term; i.e., day, week, month, and season respectively.

  11. The Relationship between Aggregated–Disaggregated Energy Consumption and Economic Growth in Turkey

    OpenAIRE

    Uğur Korkut Pata; Harun Terzi

    2016-01-01

    Energy is recognized as an important factor in the production process by capital and labor. Energy consumption has increased substantially in the world, especially since the Industrial Revolution and the 1973 oil crisis. In this study, the causality relationship between energy consumption (petroleum, electricity, per capita and total primary energy consumption, carbon dioxide emissions) and economic growth is estimated by using the JJ cointegration test, DLVAR, generalized impulse-response, a...

  12. Energy Consumption During Lactation and Duration of Breastfeeding at Puskesmas Margajaya Bekasi City in 2014

    OpenAIRE

    Ahmad Syafiq; Sandra Fikawati; Retno Widiastuti

    2015-01-01

    Despite recommendation for higher energy intake during lactation than during pregnancy, researches at Jakarta and Depok showed that energy consumption during lactation was lower than during pregnancy. The purpose of this study is to investigate the association between individual characteristics and energy consumption during lactation, and to assess the relationship between energy consumption during lactation to duration of breastfeeding among 60 mothers in the working area of PuskesmasMargaja...

  13. Energy drinks: what is all the hype? The dangers of energy drink consumption.

    Science.gov (United States)

    Rath, Mandy

    2012-02-01

    To describe the adverse effects associated with energy drink consumption among adolescents and young adults. Review of literature utilizing Medscape, the Internet, MD Consult, and CINAHL. The following search terms were used: Energy drinks, caffeine, guarana, taurine, ginseng, sugar, and caffeine toxicity. Search was limited to English language sources from 2005 to 2010. The popularity of energy drinks and the rapid growth of their excessive consumption among adolescents and young adults have brought about great concern in regards to overall health and well-being. Caffeine, which is readily available to minors, is the most commonly used psychoactive substance in the world and imposes a potentially harmful influence on health, academic performance, and personal adjustments. Teens and young adults account for nearly $2.3 billion of energy drink sales. Adolescents and young adults are often unaware that various products, such as energy drinks, herbal medications, and various other medications that promote alertness, contain caffeine. When these products are taken together, caffeine toxicity and severe adverse effects can occur. Practitioners need to be aware of the consequences of energy drink consumption and be prepared to provide appropriate patient education. ©2012 The Author(s) Journal compilation ©2012 American Academy of Nurse Practitioners.

  14. Energy Efficient Smartphones: Minimizing the Energy Consumption of Smartphone GPUs using DVFS Governors

    KAUST Repository

    Ahmad, Enas M.

    2013-05-15

    Modern smartphones are being designed with increasing processing power, memory capacity, network communication, and graphics performance. Although all of these features are enriching and expanding the experience of a smartphone user, they are significantly adding an overhead on the limited energy of the battery. This thesis aims at enhancing the energy efficiency of modern smartphones and increasing their battery life by minimizing the energy consumption of smartphones Graphical Processing Unit (GPU). Smartphone operating systems are becoming fully hardware-accelerated, which implies relying on the GPU power for rendering all application graphics. In addition, the GPUs installed in smartphones are becoming more and more powerful by the day. This raises an energy consumption concern. We present a novel implementation of GPU Scaling Governors, a Dynamic Voltage and Frequency Scaling (DVFS) scheme implemented in the Android kernel to dynamically scale the GPU. The scheme includes four main governors: Performance, Powersave, Ondmand, and Conservative. Unlike previous studies which looked into the power efficiency of mobile GPUs only through simulation and power estimations, we have implemented our approach on a real modern smartphone GPU, and acquired actual energy measurements using an external power monitor. Our results show that the energy consumption of smartphones can be reduced up to 15% using the Conservative governor in 2D rendering mode, and up to 9% in 3D rendering mode, with minimal effect on the performance.

  15. [Energy consumption and GDP growth in Beijing: cointegration and causality analysis].

    Science.gov (United States)

    Chen, Cao-Cao; Zhang, Yan; Liu, Chun-Lan; Wang, Hai-Hua; Li, Zheng

    2012-06-01

    In this paper, the Johansen cointegration technique and the vector error correction model (VECM) were used to examine the causal relationship between energy consumption (LEC) and gross domestic product (LGDP) for Beijing during the period of 1980 to 2008. Results indicated that LEC and LGDP for Beijing were related by one cointegrating vector and there was a long-run unidirectional causal relationship from GDP to energy consumption. The long-term and short-term elasticity from economy to energy consumption were 0.44 and 0.12 separately. Statistic analysis showed that from 1980 to 2008 every 1% growth in GDP annually would drive energy consumption increasing rate by 0.4% correspondently. And the effect imposed from economy to energy consumption was lagging. It showed that energy consumption was not a strong exogenous variable as to economy. The finding has significant implications from the point of view of energy conservation, emission reduction and economic development.

  16. Car taxes and energy consumption. Impact on energy consumption from tax reductions on passenger cars; Bilafgifter og energiforbrug. Energimaessige effekter af afgiftslempelser for personbiler

    Energy Technology Data Exchange (ETDEWEB)

    Wedebye, H.; Engelund, P.; Gravesen, R.; Vestergaard, L. (Tetraplan A/S (DK))

    2008-03-15

    The report describes results from the project 'Impact on energy consumption from tax reductions on specific types of passenger cars. The aim of the project is to evaluate the possibilities for reducing energy consumption, and hereby the CO2 emissions, for transport through differentiated purchase tax on passenger cars. Two schemes have been studied, which respectively favour energy efficient cars and passenger cars converted into vans. The study includes interviews, a questionnaire and analyses of register data. (BA)

  17. Analysis of Factors Contributing to Changes in Energy Consumption in Tangshan City between 2007 and 2012

    Directory of Open Access Journals (Sweden)

    Jialing Zou

    2017-03-01

    Full Text Available The aim of this paper is to identify the correlations between energy consumption and the factors that control usage in the city of Tangshan. To do this, we first analyze the current status of Tangshan’s economic development and energy consumption, and then applied the logarithmic mean Divisia index to identify the factors affecting the changes in energy consumption of all sectors. The findings are summarized as follows: (1 secondary industry accounts for an extremely high percentage of industry in Tangshan city, much higher than the national average; from 2007 to 2012, the proportion of secondary industry increased in Tangshan city; (2 Tangshan’s energy consumption in 2013 was nearly twice that in 2005. Coal and coke coal consumption was responsible for 96.2% of total energy consumption in 2005 and 95.1% in 2013; (3 Tangshan’s energy intensity decreased from 3.00 tce/thousand Yuan in 2005 to 1.85 tce/thousand Yuan in 2013. However, the energy intensity of Tangshan was far more than the average for China, and the decline in Tangshan’s energy intensity was much slower than the average for China; (4 The technical effect plays a dominant role in decreasing energy consumption in most sectors, and the scale effect is the most important contributor to increasing energy consumption in all sectors. Input structural and final use structural effects play different roles in energy consumption in different sectors.

  18. EVALUATION OF ENERGY CONSUMPTION IN AGRO-INDUSTRIAL WASTEWATER TREATMENT PLANT

    Directory of Open Access Journals (Sweden)

    Wojciech Dąbrowski

    2016-07-01

    Full Text Available Energy consumption during waste water treatment is a very important factor affecting food industry plants. Apart from highly efficient treatment of dairy and meat sewage, a low energy consumption is required in order to lower its costs. During the research period parameters of raw and treated sewage were tested (BOD, COD, N-total, P-total. Also, the energy consumption from selected processes as well as total consumption were measured. Indicators of energy consumption per m3 and removed load were calculated. It was found that biological treatment and aeration played the main role in energy consumption in both objects. It was respectively 40 and 47% for Bielmlek and JBB plants. The second biggest energy consuming stage of treatment in both objects was sludge processing. Energy required to process excessive sludge equaled 30% of the total energy usage in both plants. Energy consumption factors related to hydraulic flow gave results in the range from 2,05 to 3,3 kWhm-3 and from 2,72 to 3,23 kWhm-3 for Bielmlek and JBB plants respectively. The research will be continued in order to optimize energy consumption while retaining high efficiency treatment in food industry WWTPs. Finally a mathematical model will be prepared for optimizing energy consumption in food industry WWTPs.

  19. Energy consumption and conservation, evaluation; Consommation et economies d'energie, un tour d'horizon

    Energy Technology Data Exchange (ETDEWEB)

    Acket, C

    2006-04-15

    The energy consumption is increasing of more than 1% each year. It is necessary to slow down this growth and much better to inverse it. Observing the main consumption posts, energy saving is possible at short dated for the residential sector and medium and long dated for the transports and the industry. Anyway the individual behaviors are essential. The author presents the situation for each posts, providing data on the energy consumption and saving and recommendations. (A.L.B.)

  20. Energy for 500 Million Homes: Drivers and Outlook for Residential Energy Consumption in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; McNeil, Michael A.; Levine, Mark

    2009-06-01

    China's rapid economic expansion has propelled it to the rank of the largest energy consuming nation in the world, with energy demand growth continuing at a pace commensurate with its economic growth. The urban population is expected to grow by 20 million every year, accompanied by construction of 2 billion square meters of buildings every year through 2020. Thus residential energy use is very likely to continue its very rapid growth. Understanding the underlying drivers of this growth helps to identify the key areas to analyze energy efficiency potential, appropriate policies to reduce energy use, as well as to understand future energy in the building sector. This paper provides a detailed, bottom-up analysis of residential building energy consumption in China using data from a wide variety of sources and a modelling effort that relies on a very detailed characterization of China's energy demand. It assesses the current energy situation with consideration of end use, intensity, and efficiency etc, and forecast the future outlook for the critical period extending to 2020, based on assumptions of likely patterns of economic activity, availability of energy services, technology improvement and energy intensities. From this analysis, we can conclude that Chinese residential energy consumption will more than double by 2020, from 6.6 EJ in 2000 to 15.9 EJ in 2020. This increase will be driven primarily by urbanization, in combination with increases in living standards. In the urban and higher income Chinese households of the future, most major appliances will be common, and heated and cooled areas will grow on average. These shifts will offset the relatively modest efficiency gains expected according to current government plans and policies already in place. Therefore, levelling and reduction of growth in residential energy demand in China will require a new set of more aggressive efficiency policies.

  1. Final Energy Consumption Trends and Drivers in Czech Republic and Latvia

    Directory of Open Access Journals (Sweden)

    Zhiqian Yu

    2017-08-01

    Full Text Available This paper analyses the trends of final energy consumption in Latvia and Czech Republic. Analysis of final energy consumption during 2000-2013 period indicated the main driving forces of final energy consumption during and after world financial crisis of 2008. The paper aimed to evaluate the impact of economic activity and other factors on final energy consumption. The decomposition of the final energy consumption is assessed by analyzing effect of different drivers by the main end-users sector (industry, transport, households, agriculture, services, activity, demography, lifestyles, structural effects, energy savings etc. The results show that the reduction in final energy consumption in most EU members states before and after year 2008 can be related to the decline in energy intensities within endusers sectors. At the same time, the increase in final energy intensity after the year 2008 is attributed to expansion of energy demand sectors. Comparison of final energy consumption trends and drivers in Latvia and Czech Republic indicated that Czech Republic implemented more policies and measures in industry and tertiary sector and this provided for final energy consumption decreased and huge energy savings in these sectors.

  2. Comparison of Real World Energy Consumption to Models and Department of Energy Test Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States); Kar, Rahul [Navigant Consulting, Inc., Burlington, MA (United States); Foley, Kevin [Navigant Consulting, Inc., Burlington, MA (United States)

    2011-09-01

    This study investigated the real-world energy performance of appliances and equipment as it compared with models and test procedures. The study looked to determine whether the U.S. Department of Energy and industry test procedures actually replicate real world conditions, whether performance degrades over time, and whether installation patterns and procedures differ from the ideal procedures. The study first identified and prioritized appliances to be evaluated. Then, the study determined whether real world energy consumption differed substantially from predictions and also assessed whether performance degrades over time. Finally, the study recommended test procedure modifications and areas for future research.

  3. Is it so bad? Energy consumption and changes in stocks of energy-converting artefacts

    Energy Technology Data Exchange (ETDEWEB)

    Bladh, Mats (Department of Thematic Studies, Technology and Social Change, Linkoeping University (Sweden))

    2011-07-01

    The development of total energy consumption is important in a world with limited resources. It is the result of two basic tendencies working in opposite directions: growth in use (such as more cars) and improvements in energy efficiency (such as more fuel-efficient engines). Since the 1970s energy consumption has stagnated in Sweden. This means that increasing supply has been counteracted by measures improving overall energy efficiency to a larger degree than before. How can longterm development in energy consumption be analysed? This paper proposes a change-of-stock model as a tool for such analyses. In order to show the fruitfulness of this approach, historical data on cars, dwellings and lamps in Sweden are used. The basic idea is that changes in composition, size and use of stocks of these energy converters explain energy consumption. Gains in efficiency can be reached in two ways, either through changing technological path (such as electric cars instead of petrol-driven cars) or improvements within the path taken (such as fuel-efficient combustion engines). As the existence of path dependence is assumed here, it is expected that the latter will dominate. But does that mean small gains in energy saved? Results from the cases in this paper show considerable gains of efficiency in fuel consumption in private cars, and heating efficiency in multi-dwelling houses. Thus, incremental changes are important, but are partially offset by changes in characteristics of the artefacts. Radical changes, such as the factual change from air to rail transportation, and a counterfactual double switch from gasoline to electric cars and from electric heating to district heating, as well as probable gains from the phase-out of incandescent lamps, show even bigger gains. Both incremental and radical changes are the subject of counteracting tendencies, of a broader nature than that associated with rebound effects, such as more cars per inhabitant and fewer people in each dwelling. The

  4. Energy balance of chosen crops and their potential to saturate energy consumption in Slovakia

    Directory of Open Access Journals (Sweden)

    Katarína Hrčková

    2016-06-01

    Full Text Available The aim of the present work was to assess and compare energy inputs and outputs of various crop managements in 2011–2012. Two main crops on arable land and three permanent grasslands were investigated. Silage maize (Zea mays L. and winter wheat (Triticum aestivum L. were grown on lowland, whilst two semi-natural grasslands and grassland infested by tufted hair-grass (Deschampsia caespitose (L. P. Beauv were located in mountainous regions of Slovakia. In these crops and grasslands the dry matter yield was measured and subsequently the supplementary energy, energy gain and unifying energy value – tonne of oil equivalent (TOE – were calculated. Silage maize with 233.37 GJ*ha-1 has provided the highest energy gain. In the group of grasslands, grassland infested by tufted hair-grass has offered the highest energy gain (59.77 GJ*ha-1. And this grassland had the lowest requirement on the supplementary energy (3.66 GJ*ha-1, contrary to silage maize with highest one (12.37 GJ*ha-1. The total energy potential of the crop biomasses was confronted with energy consumption in Slovakia. Winter wheat has the biggest energy potential, but it could cover only 19.6% and 11.3% total consumption of electricity or natural gas, respectively. Large area of permanent grasslands and their spatial location make them an important energy reservoir for bioenergy production. But, it is not possible to replace all consumed fossil fuels by bioenergy from these tested renewable energy sources.

  5. Energy consumption and GDP in Turkey : Is there a co-integration relationship?

    NARCIS (Netherlands)

    Montfort, van K.; Lise, W.

    2007-01-01

    Energy consumption and GDP are expected to grow by 5.9% and 7% annually until 2025 in Turkey. This paper tries to unfold the linkage between energy consumption and GDP by undertaking a co-integration analysis for Turkey with annual data over the period 1970-2003. The analysis shows that energy

  6. Energy consumption and GDP in Turkey: is there a co-integration relationship?

    NARCIS (Netherlands)

    van Montfort, C.A.G.M.; Lise, W.

    2007-01-01

    Energy consumption and GDP are expected to grow by 5.9% and 7% annually until 2025 in Turkey. This paper tries to unfold the linkage between energy consumption and GDP by undertaking a co-integration analysis for Turkey with annual data over the period 1970-2003. The analysis shows that energy

  7. Analysis of aggregated functional data from mixed populations with application to energy consumption

    DEFF Research Database (Denmark)

    Lenzi, Amanda; de Souza, Camila P. E.; Dias, Ronaldo

    2017-01-01

    Understanding energy consumption patterns of different types of consumers is essential in any planning of energy distribution. However, obtaining individual-level consumption information is often either not possible or too expensive. Therefore, we consider data from aggregations of energy use, th...

  8. An econometric modelling of financial development-aggregate energy consumption nexus for Ghana

    OpenAIRE

    Yeboah Asuamah, Samuel

    2017-01-01

    The study modelled the long run and short run link between financial development and aggregate energy consumption in Ghana for the period 1970 to 2011 using Autoregressive Distributed Lad Model (ARDL). The results produced significant evidence of cointegration between the variables. The results seem to suggest that financial development is a key explanatory variable in aggregate energy consumption. Financial development is recommended as a policy tool to manage energy consumption. Causality i...

  9. Energy consumption and work-travel trips: London, Birmingham, and Manchester, 1981 – 2001

    OpenAIRE

    Martin Frost; Nigel Spence

    2008-01-01

    The changing modal composition and volume of work travel in London, Birmingham, and Manchester and their resultant energy consumption implications are considered in this research. Essentially, the mechanism is to calculate the passenger km travelled by mode and then to apply mode-specific energy consumption parameters to calculate energy consumption. By classifying work-travel trips according to their travel mode and their location and orientation (within, out of, and into town) it is possibl...

  10. Nonresidential buildings energy consumption survey: 1979 consumption and expenditures. Part 2. Steam, fuel oil, LPG, and all fuels

    Energy Technology Data Exchange (ETDEWEB)

    Patinkin, L.

    1983-12-01

    This report presents data on square footage and on total energy consumption and expenditures for commercial buildings in the contiguous United States. Also included are detailed consumption and expenditures tables for fuel oil or kerosene, liquid petroleum gas (LPG), and purchased steam. Commercial buildings include all nonresidential buildings with the exception of those where industrial activities occupy more of the total square footage than any other type of activity. 7 figures, 23 tables.

  11. Prediction of Industrial Electric Energy Consumption in Anhui Province Based on GA-BP Neural Network

    Science.gov (United States)

    Zhang, Jiajing; Yin, Guodong; Ni, Youcong; Chen, Jinlan

    2018-01-01

    In order to improve the prediction accuracy of industrial electrical energy consumption, a prediction model of industrial electrical energy consumption was proposed based on genetic algorithm and neural network. The model use genetic algorithm to optimize the weights and thresholds of BP neural network, and the model is used to predict the energy consumption of industrial power in Anhui Province, to improve the prediction accuracy of industrial electric energy consumption in Anhui province. By comparing experiment of GA-BP prediction model and BP neural network model, the GA-BP model is more accurate with smaller number of neurons in the hidden layer.

  12. Comparison of Electric Vehicle’s Energy Consumption Factors for Different Road Types

    Directory of Open Access Journals (Sweden)

    Enjian Yao

    2013-01-01

    Full Text Available Energy-optimal route planning for electric vehicle (EV is highly required for the wide-spread use of EV, which is hindered by limited battery capacity and relative short cruising range. Obtaining the cost for each link (i.e., link energy consumption in road networks plays a key role in energy-optimal route planning process. The link energy consumption depends mainly on energy consumption factor, which is related to not only vehicle speed but also road type. This study aims to analyze the difference of EV’s energy consumption factors for different road types. According to the floating car data (FCD collected from the road network in Beijing, the vehicle specific power (VSP distributions under different average travel speeds for different road types are analyzed firstly, and then the EV’s energy consumption rates under different VSP-Bins are calculated. By using VSP as an intermediate variable, EV’s energy consumption factor models for different road types are established and the difference of EV’s energy consumption factors is analyzed. The results show that road type-based energy consumption factor should be used in EV’s energy-optimal route planning process.

  13. Analysis of energy consumption at the Rzeszów Wastewater Treatment Plant

    Science.gov (United States)

    Masłoń, Adam

    2017-11-01

    Wastewater treatment plants can be classified as energy-intensive facilities, as they account for up to 35 percent of municipal energy consumption. Pumps and aeration systems consume a significant portion of energy within the wastewater plants in particular. The cost of energy consumption for wastewater treatment processes reaches up to 40% of the total operating cost. In case of the WWTPs with the activated sludge systems, about 50% of energy is used for aeration and mixing purposes. At WWTPs, energy consumption is often correlated with the magnitude and type of pollutant load, which can influence the treatment methods and technologies used in the WWTP. In many cases wastewater treatment plants are operated without optimized measures for process optimization. A detailed study of the energy consumption should be executed in order to determine the optimization potential. This paper presents the energy consumption in municipal wastewater treatment plant in Rzeszów (Poland). In the year 2016, parameters of raw and treated wastewater were tested. The data related to energy consumption in plants allowed us to determine the energy intensity coefficients. Total consumption was measured. Indicators of energy consumption per cubic meter and removed load were calculated.

  14. Interpreting the dynamic nexus between energy consumption and economic growth: Empirical evidence from Russia

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yuejun, E-mail: zyjmis@126.co [School of Management and Economics, Beijing Institute of Technology (BIT), 5 South Zhongguancun Street, Haidian District, Beijing 100081 (China) and Center for Energy and Environmental Policy Research, Beijing Institute of Technology, Beijing 100081 (China)

    2011-05-15

    Research on the nexus between energy consumption and economic growth is a fundamental topic for energy policy making and low-carbon economic development. Russia proves the third largest energy consumption country in the world in recent years, while little research has shed light upon its energy consumption issue till now, especially its energy-growth nexus. Therefore, this paper empirically investigates the dynamic nexus of the two variables in Russia based on the state space model. The results indicate that, first of all, Russia's energy consumption is cointegrated with its economic growth in a time-varying way though they do not have static or average cointegration relationship. Hence it is unsuitable to merely portrait the nexus in an average manner. Second, ever since the year of 2000, Russia's energy efficiency has achieved much more promotion compared with that in previous decades, mainly due to the industrial structure adjustment and technology progress. Third, among BRIC countries, the consistency of Russia's energy consumption and economic growth appears the worst, which suggests the complexity of energy-growth nexus in Russia. Finally, there exists bi-directional causality between Russia's energy consumption and economic growth, though their quantitative proportional relation does not have solid foundation according to the cointegration theory. - Research highlights: {yields}This study investigates the dynamic nexus of energy consumption and economic growth in Russia. {yields} Russia's energy consumption is cointegrated with its economic growth in a time-varying way though they do not have static or average cointegration relationship. {yields} Ever since 2000, Russia's energy efficiency has achieved much more promotion compared with that in previous decades. {yields} Among BRIC countries, the consistency of Russia's energy consumption and economic growth appears the worst. {yields} There exists bi-directional causality

  15. Consumption of Energy Drinks Among Lebanese Youth: A Pilot Study on the Prevalence and Side Effects

    OpenAIRE

    Itany, Manal; Diab, Batoul; Rachidi, Samar; Awada, Sanaa; Al Hajje, Amal; Bawab, Wafaa; Salameh, Pascale

    2014-01-01

    Background: The new millennium has been together with a variety of synthetic and caffeinated high-energy drinks targeting the youth market. Energy drinks raise the level of energy and their consumption has been increased significantly worldwide. Objectives: This research aimed to determine patterns of energy drink consumption and to assess the prevalence of adverse side effects among energy drink users. Patients and Methods: A pilot cross-sectional study survey was undertaken on students aged...

  16. Study on Energy Consumption of a Turning Vehicle With Torque Vectoring and Four-Wheel Steering

    OpenAIRE

    Mayh, Ahmed; Sonono, Tofik

    2017-01-01

    Energy is a limited resource, and as such it isnecessary to find ways to decrease the energy consumptionwherever possible. In this paper, the energy consumption of avehicle with a drive-by-wire system is observed. The drive-bywiresystem includes individual wheel steering and individualtorque feed to each tire. In order to generate results, a bicyclemodel is created in Simulink. This paper focuses on measuringthe energy consumption in terms of energy losses due to tireslip. The simulations are...

  17. Challenging the myth of non-materiality. Energy consumption in service industries.

    OpenAIRE

    Fourcroy, Charlotte; Gallouj, Faïz; Decellas, Fabrice

    2011-01-01

    International audience; This paper addresses the issue of energy consumption in service industries. Official energy statistics show that the amount of energy consumed in service industries is quite small, and this is explained in the theoretical literature by the presumed intangibility of these services. Our hypothesis, however, is that the energy consumed by services has been underestimated. After identifying and analyzing the full range of sources of energy consumption in service industries...

  18. Milking systems and milking robots. Insight in energy consumption; Melksystemen en melkrobots. Inzicht in energiegebruik

    Energy Technology Data Exchange (ETDEWEB)

    Wientjes, H.; Rougoor, C. [DLV Rundvee Advies, Uden (Netherlands)

    2012-03-15

    Insight is given in the energy consumption during milking and how much energy can be saved. The goal is to reduce greenhouse gas emissions, produce renewable energy and the minimization of energy consumption in the dairy industry [Dutch] Inzicht wordt gegeven in het energieverbruik bij de melkwinning en de vraag welke energiebesparing hierbij nog haalbaar is. Het doel is vermindering van de uitstoot van broeikasgassen, productie van duurzame energie en de minimalisatie van het energieverbruik in de melkveehouderij.

  19. Does increasing energy or electricity consumption improve quality of life in industrial nations?

    Energy Technology Data Exchange (ETDEWEB)

    Mazur, Allan, E-mail: amazur@syr.ed [Center for Environmental Policy and Administration, 435 Crouse-Hinds Hall, Syracuse University, Syracuse, NY 13244 (United States)

    2011-05-15

    Among the world's nations, per capita energy and electricity consumption is highly correlated with diverse indicators of quality of life. This is often interpreted to mean that additional energy and electricity consumption causes improvements in life quality. Prior analyses of cross-sectional data question this interpretation for industrial nations that already have high per capita energy consumption. The present analysis with longitudinal data shows that among industrial nations, increases in per capita energy and electricity consumption over the past three decades are not associated with corresponding improvements in quality of life. - Research highlights: {yields} Increased energy and electricity use is essential for poor nations to improve wellbeing. {yields} This analysis is limited to industrial nations, already high in energy consumption. {yields} Changes in per capita energy/electricity use are not associated with improved wellbeing.

  20. Comparison and Evolution of Energy Consumption in Moroccan Agro-food Industries

    Science.gov (United States)

    El Badaoui, Meryem; Touzani, Abdellatif

    2017-06-01

    The aim of this article is to establish a comparison between the Moroccan energy consumption and the BREF the reference document on best available techniques in the food industries, then an evolution of this consumption by 2030 in order to better understand it and to define strategies to reduce energy bill. According to a survey conducted among 5000 Moroccan companies, we were able to compare the energy consumption of the agro-food industries including sugar industry, dairy industry, cereal industry; fatty substances industry and fishing industry with that of the BREF. Also an evolution of Moroccan consumption was established by 2030 using the linear regression method, and then calculated a non-negligible average annual growth rate (AAGR). The results show that the Moroccan energy consumption is adequate to that of the BREF, and an energy consumption constantly increasing by registering a non-negligible AAGR.

  1. Environmental knowledge and attitudes and behaviours towards energy consumption.

    Science.gov (United States)

    Paço, Arminda; Lavrador, Tânia

    2017-07-15

    Numerous investigations have arisen in order to study and characterise environmentally friendly consumer profiles, with some authors applying the relationship between knowledge, attitudes and behaviour to this end. The present research approach, based upon the Theory of Reasoned Action (TRA), seeks to verify the existence of relationships between knowledge and attitudes and between knowledge and environmental behaviour. In this instance, data collection involved a questionnaire aimed at assessing the overall environmental knowledge of respondents as well as their attitudes and behaviours regarding energy issues (savings, consumption, interest, use). The results pointed to the lack of relationship between knowledge and attitudes, and between knowledge and behaviour whilst the relationship between attitudes and behaviour proved to be only weak. The results also found that males, older students and those studying Engineering and the Social and Human Sciences are those reporting higher levels of environmental knowledge. However, when it comes to attitudes and behaviours, females seem to display more awareness around these issues. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Nuclear energy consumption, oil prices, and economic growth: Evidence from highly industrialized countries

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chien-Chiang, E-mail: cclee@cm.nsysu.edu.tw; Chiu, Yi-Bin

    2011-03-15

    This study utilizes the Johansen cointegration technique, the Granger non-causality test of Toda and Yamamoto (1995), the generalized impulse response function, and the generalized forecast error variance decomposition to examine the dynamic interrelationship among nuclear energy consumption, real oil price, oil consumption, and real income in six highly industrialized countries for the period 1965-2008. Our empirical results indicate that the relationships between nuclear energy consumption and oil are as substitutes in the U.S. and Canada, while they are complementary in France, Japan, and the U.K. Second, the long-run income elasticity of nuclear energy is larger than one, indicating that nuclear energy is a luxury good. Third, the results of the Granger causality test find evidence of unidirectional causality running from real income to nuclear energy consumption in Japan. A bidirectional relationship appears in Canada, Germany and the U.K., while no causality exists in France and the U.S. We also find evidence of causality running from real oil price to nuclear energy consumption, except for the U.S., and causality running from oil consumption to nuclear energy consumption in Canada, Japan, and the U.K., suggesting that changes in price and consumption of oil influence nuclear energy consumption. Finally, the results observe transitory initial impacts of innovations in real income and oil consumption on nuclear energy consumption. In the long run the impact of real oil price is relatively larger compared with that of real income on nuclear energy consumption in Canada, Germany, Japan, and the U.S.

  3. Analysis of energy consumption in lowland rice-based cropping system of Malaysia

    Directory of Open Access Journals (Sweden)

    Chan Chee Wan

    2005-07-01

    Full Text Available Sufficient energy is needed in the right form and at the right time for adequate crop production. One way to optimize energy consumption in agriculture is to determine the efficiency of methods and techniques used. With the current increase in world population, energy consumption needs effective planning. That is, the input elements need to be identified in order to prescribe the most efficient methods for controlling them. This study was undertaken in order to determine the direct and indirect energy consumption of field operations in a lowland rice production system of Malaysia. Field time, fuel and other energy requirements were measured for the tillage, planting, fertilizing, spraying and harvesting operations performed. Energy analysis carried out revealed the highest average operational energy consumption was for tillage (1747.33 MJ ha-1 which accounted for about 48.6% of the total operational energy consumption (3595.87 MJ ha-1, followed by harvesting (1171.44 MJ ha-1, 32.6% and planting (562.91 MJ ha-1, 15.7%. Fertilizing and pesticide spraying did not make any significant contributions to the operational energy consumption. Based on energy sources, fuel was the main consumer of direct energy with 2717.82 MJha-1 (22.2%, and fertilizer recording the highest indirect energy consumption of 7721.03 MJha-1 (63.2%. Human labour, pesticides, seeds and indirect energy for machinery use had marginal importance, contributing only 0.2%, 0.6%, 6.8% and 6.9%, respectively to the total energy consumption (12225.97 MJha-1. Average grain yield was 6470.8 kg ha-1, representing energy output of 108321.75 MJha-1, that is, 96095.78 MJ net energy gain or 8.86 MJ output per MJ input. Energy input per kilogram grain yield was 1.89 MJkg-1. The results of the study indicate energy gain in the lowland rice production system of Malaysia.

  4. Energy Conservation Behaviour Toolkit. Incentive Mechanisms for effective decrease of energy consumption at the workplace

    Energy Technology Data Exchange (ETDEWEB)

    Boerner, D.; Kalz, M.; Ternier, S.; Specht, M. [Centre for Learning Sciences and Technologies CELSTEC, Open Universiteit, Heerlen (Netherlands)

    2013-01-15

    The work in this project is based on a previous project (Energy Awareness Displays - Making the Invisible Visible) in which several measurement and visualization approaches have been developed to make employees more aware about energy consumption and pro-environmental behavior at the workplace. While awareness is a first important step for the decrease of energy consumption and environmental learning it is not sufficient as a means for sustainable behavior change. For this reason we have explored in the follow-up project approaches how pro-environmental behavior at the workplace can be encouraged, rewarded and sustained. For this purpose we have implemented several technological solutions and we have piloted these in form of an energy conservation game called Mindergie at the main campus of the Open University in Heerlen, Netherlands. The project is in line with an earlier identified research gap in terms of energy conservation at the workplace and uses state-of-the-art technologies for mobile gaming and rewarding of non-formal learning activities.

  5. Storying energy consumption: Collective video storytelling in energy efficiency social marketing.

    Science.gov (United States)

    Gordon, Ross; Waitt, Gordon; Cooper, Paul; Butler, Katherine

    2018-02-22

    Despite calls for more socio-technical research on energy, there is little practical advice to how narratives collected through qualitative research may be melded with technical knowledge from the physical sciences such as engineering and then applied in energy efficiency social action strategies. This is despite established knowledge in the environmental management literature about domestic energy use regarding the utility of social practice theory and narrative framings that socialise everyday consumption. Storytelling is positioned in this paper both as a focus for socio-technical energy research, and as one potential practical tool that can arguably enhance energy efficiency interventions. We draw upon the literature on everyday social practices, and storytelling, to present our framework called 'collective video storytelling' that combines scientific and lay knowledge about domestic energy use to offer a practical tool for energy efficiency management. Collective video storytelling is discussed in the context of Energy+Illawarra, a 3-year cross-disciplinary collaboration between social marketers, human geographers, and engineers to target energy behavioural change within older low-income households in regional NSW, Australia. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. A look at commercial buildings in 1995: Characteristics, energy consumption, and energy expenditures

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The commercial sector consists of business establishments and other organizations that provide services. The sector includes service businesses, such as retail and wholesale stores, hotels and motels, restaurants, and hospitals, as well as a wide range of facilities that would not be considered commercial in a traditional economic sense, such as public schools, correctional institutions, and religious and fraternal organizations. Nearly all energy use in the commercial sector takes place in, or is associated with, the buildings that house these commercial activities. Analysis of the structures, activities, and equipment associated with different types of buildings is the clearest way to evaluate commercial sector energy use. The Commercial Buildings Energy Consumption Survey (CBECS) is a national-level sample survey of commercial buildings and their energy suppliers conducted quadrennially (previously triennially) by the Energy Information Administration (EIA). The target population for the 1995 CBECS consisted of all commercial buildings in the US with more than 1,000 square feet of floorspace. Decision makers, businesses, and other organizations that are concerned with the use of energy--building owners and managers, regulators, legislative bodies and executive agencies at all levels of government, utilities and other energy suppliers--are confronted with a buildings sector that is complex. Data on major characteristics (e.g., type of building, size, year constructed, location) collected from the buildings, along with the amount and types of energy the buildings consume, help answer fundamental questions about the use of energy in commercial buildings.

  7. Spatial Configuration of Energy Consumption and Carbon Emissions of Shanghai, and Our Policy Suggestions

    Directory of Open Access Journals (Sweden)

    Kexi Pan

    2017-01-01

    Full Text Available This research constructs a 1 km × 1 km Shanghai energy consumption and carbon emission spatial grid through a bottom-up approach. First, we locate all energy consumption locations in Shanghai via GIS. Second, we calculate energy consumption and associated CO2 emissions by energy type, by usage type, and by facilities. Finally, we use a spatial grid to represent the energy consumption and CO2 emissions. The grid shows CO2 emissions in Shanghai are highly spatially correlated with energy types and volumes of consumption. This research also finds out that high energy consumption and carbon emission locations in Shanghai display significant spatial aggregation. In 7209 spatial energy consumption cells, the top 10 grids of emissions account for 52.8% of total CO2 emissions in Shanghai; the top 20 grids account for 64.5% and the top 50 grids account for 76.5%. The most critical point emission sources are coal-fired power plants and iron and steel plants. The most important line emission sources are the Yan’an Road and Inner Ring viaducts. The area emission sources that account for the most future-projected growth are commercial and residential natural gas. After this spatial analysis, this paper makes policy suggestions and solutions to conserve energy consumption and mitigate carbon emissions in Shanghai.

  8. Economic energy distribution and consumption in a microgrid Part1: Cell level controller

    DEFF Research Database (Denmark)

    Tahersima, Fatemeh; Andersen, Palle; Madsen, Per Printz

    2013-01-01

    We have investigated energy management of a small scale electrical microgrid comprised of local renewable generation, consumption and storage units. The microgrid has the possibility of connection to the electricity grid as well to compensate for energy deficit. The objective is to fulfill...... microgrid's energy demands from the local electricity producers as much as possible. The other objective is to manage the consumption such that consumption costs are minimum for all households. To fulfill the objectives, as the first step of designing a hierarchical controller, we focused on designing...... an energy and cost minimizing controller for one building. To this aim, a model predictive controller is formulated to schedule the building's energy consumption using potential load flexibility. Simulation results show the economically optimal energy consumption of one building based on the defined load...

  9. DOES ENERGY CONSUMPTION VOLATILITY AFFECT REAL GDP VOLATILITY? AN EMPIRICAL ANALYSIS FOR THE UK

    Directory of Open Access Journals (Sweden)

    Abdul Rashid

    2013-10-01

    Full Text Available This paper empirically examines the relation between energy consumption volatility and unpredictable variations in real gross domestic product (GDP in the UK. Estimating the Markov switching ARCH model we find a significant regime switching in the behavior of both energy consumption and GDP volatility. The results from the Markov regime-switching model show that the variability of energy consumption has a significant role to play in determining the behavior of GDP volatilities. Moreover, the results suggest that the impacts of unpredictable variations in energy consumption on GDP volatility are asymmetric, depending on the intensity of volatility. In particular, we find that while there is no significant contemporaneous relationship between energy consumption volatility and GDP volatility in the first (low-volatility regime, GDP volatility is significantly positively related to the volatility of energy utilization in the second (high-volatility regime.

  10. Reduction of peak energy demand based on smart appliances energy consumption adjustment

    Science.gov (United States)

    Powroźnik, P.; Szulim, R.

    2017-08-01

    In the paper the concept of elastic model of energy management for smart grid and micro smart grid is presented. For the proposed model a method for reducing peak demand in micro smart grid has been defined. The idea of peak demand reduction in elastic model of energy management is to introduce a balance between demand and supply of current power for the given Micro Smart Grid in the given moment. The results of the simulations studies were presented. They were carried out on real household data available on UCI Machine Learning Repository. The results may have practical application in the smart grid networks, where there is a need for smart appliances energy consumption adjustment. The article presents a proposal to implement the elastic model of energy management as the cloud computing solution. This approach of peak demand reduction might have application particularly in a large smart grid.

  11. Impact of intersection type and a vehicular fleet's hybridization level on energy consumption and emissions

    Directory of Open Access Journals (Sweden)

    Samia Boubaker

    2016-06-01

    Full Text Available A vehicle's energy consumption and emissions are two major constraints in sustainable development. Both of them have proportionally raised in recent decades with the exponential growth of world traffic demands. The reduction of road traffic-generated energy consumption and emissions have thus become unprecedentedly challenging and worth examining. This paper investigates energy consumption and environmental problems present at roundabout and signalized intersection to analyze the impact of the hybridization level's fleet and intersection type on vehicle consumption and pollution. Instantaneous fuel consumption and emission models coupled with simulation of urban mobility (SUMO are in this study. The authors started with modeling energy consumption. Then, an emission model emissions from traffic (EMIT was implemented to quantify vehicle emissions of CO2, CO and NOx. These models help investigate the influence of intersection type on energy consumption and environmental conditions. The authors implemented a signalized intersection and roundabout using SUMO. The input data are collected from the roundabout of Sousse (Tunisia using video data collection. Since there is a lack of econometric models that emulate hybridized stream behavior near intersections, two energy consumption models for the roundabout and crossroad are developed using traffic flow and hybridization level as the input variables. Compared to crossroads, a roundabout can obtain more environmental improvements and substantial reductions in energy consumption and road traffic emissions.

  12. PROSPECTS FOR TRANSPORT ENERGY CONSUMPTION: METHODOLOGICAL APPROACHES AND RESULTS OF FORECASTING

    Directory of Open Access Journals (Sweden)

    Eder L.V.

    2016-03-01

    Full Text Available The direction and effectiveness of the using mineral resources, as well as the development trend of the mineral markets, especially energy markets - is one of the central topics of the development of relevant industries. The article discusses the consumption of mineral energy resources in transport with the differentiation by the countries of the world. It proposed to improve the methods of forecasting of energy consumption in the transport sector in the medium and long term. Relevance of the work associated with the leading role of the transport sector in the formation of oil demand in the world. In most developed and developing countries vehicle transport accounts for 60-70% of the total domestic oil consumption. Forecasting of energy demand is particular important to ensure energy security of the countries in the transport sector in the medium and long term. Predicting energy consumption by road vehicles includes two main areas: the forecast of specific energy consumption vehicle and the forecast of the number of cars. The authors examined historical data of specific energy consumption of road vehicle with the differentiation by the countries of Europe and Russia. The analysis revealed a steady decline in energy intensity in most advanced countries. However, this process is different in intensity decrease specific energy consumption and the time of occurrence of the trend. An analysis of the specific energy consumption in the past 25 years has shown that the dynamics of the index most accurately described by an exponential function: the initial stage of reduction of energy consumption is more intensive than in subsequent periods. As a result, the general pattern was derived convergence of energy consumption and the parameters depending on the speed of lowering the energy intensity of its initial value. On basis of trend models and identified reducing energy consumption depending on the speed of its entry-level may carry out the forecast of

  13. Prospects for transport energy consumption: methodological approaches and results of forecasting companies.

    Directory of Open Access Journals (Sweden)

    Nemov V. Yu.

    2016-03-01

    Full Text Available The direction and effectiveness of the using mineral resources, as well as the development trend of the mineral markets, especially energy markets – is one of the central topics of the development of relevant industries. The article discusses the consumption of mineral energy resources in transport with the differentiation by the countries of the world. It proposed to improve the methods of forecasting of energy consumption in the transport sector in the medium and long term. Relevance of the work associated with the leading role of the transport sector in the formation of oil demand in the world. In most developed and developing countries vehicle transport accounts for 60-70% of the total domestic oil consumption. Forecasting of energy demand is particular important to ensure energy security of the countries in the transport sector in the medium and long term. Predicting energy consumption by road vehicles includes two main areas: the forecast of specific energy consumption vehicle and the forecast of the number of cars. The authors examined historical data of specific energy consumption of road vehicle with the differentiation by the countries of Europe and Russia. The analysis revealed a steady decline in energy intensity in most advanced countries. However, this process is different in intensity decrease specific energy consumption and the time of occurrence of the trend. An analysis of the specific energy consumption in the past 25 years has shown that the dynamics of the index most accurately described by an exponential function: the initial stage of reduction of energy consumption is more intensive than in subsequent periods. As a result, the general pattern was derived convergence of energy consumption and the parameters depending on the speed of lowering the energy intensity of its initial value. On basis of trend models and identified reducing energy consumption depending on the speed of its entry-level may carry out the forecast of

  14. Analysis of electric energy consumption of automatic milking systems in different configurations and operative conditions.

    Science.gov (United States)

    Calcante, Aldo; Tangorra, Francesco M; Oberti, Roberto

    2016-05-01

    Automatic milking systems (AMS) have been a revolutionary innovation in dairy cow farming. Currently, more than 10,000 dairy cow farms worldwide use AMS to milk their cows. Electric consumption is one of the most relevant and uncontrollable operational cost of AMS, ranging between 35 and 40% of their total annual operational costs. The aim of the present study was to measure and analyze the electric energy consumption of 4 AMS with different configurations: single box, central unit featuring a central vacuum system for 1 cow unit and for 2 cow units. The electrical consumption (daily consumption, daily consumption per cow milked, consumption per milking, and consumption per 100L of milk) of each AMS (milking unit + air compressor) was measured using 2 energy analyzers. The measurement period lasted 24h with a sampling frequency of 0.2Hz. The daily total energy consumption (milking unit + air compressor) ranged between 45.4 and 81.3 kWh; the consumption per cow milked ranged between 0.59 and 0.99 kWh; the consumption per milking ranged between 0.21 and 0.33 kWh; and the consumption per 100L of milk ranged between 1.80 to 2.44 kWh according to the different configurations and operational contexts considered. Results showed that AMS electric consumption was mainly conditioned by farm management rather than machine characteristics/architectures. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  15. Strategy for reducing the energy consumption in buildings; Denmark; Strategi for reduktion af energiforbruget i bygninger

    Energy Technology Data Exchange (ETDEWEB)

    2009-04-15

    Today, Denmark has some of the most strict energy requirements in the world for new buildings. The long-term vision is that all new buildings shall be plus-energy buildings, i.e. they generate more energy than they consume. At the same time, the energy consumption in the existing buildings shall be reduced significantly. The strategy presents initiatives that shall contribute to reduce the energy consumption in both new buildings and in the existing buildings. The initiatives are eg. still stricter energy requirements for new buildings, stricter building codes for the existing buildings, economic incentives, better education, improvements of accounting of the energy consumption, and innovation. All the initiatives must secure that any reduction in energy consumption does not affect the indoor climate negatively. (ln)

  16. Understanding Teenagers' Personal Contexts to Design Technology That Supports Learning about Energy Consumption

    Science.gov (United States)

    Avramides, Katerina; Craft, Brock; Luckin, Rosemary

    2016-01-01

    Energy sustainability is prevalent in political and popular rhetoric and yet energy consumption is rising. Teenagers are an important category of future energy consumers, but little is known of their conceptions about energy and energy saving. We report on empirical research with two groups of teenagers. This is part of ongoing work to design…

  17. The Reality and Future Scenarios of Commercial Building Energy Consumption in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Lin, Jiang

    2007-08-01

    While China's 11th Five Year Plan called for a reduction of energy intensity by 2010, whether and how the energy consumption trend can be changed in a short time has been hotly debated. This research intends to evaluate the impact of a variety of scenarios of GDP growth, energy elasticity and energy efficiency improvement on energy consumption in commercial buildings in China using a detailed China End-use Energy Model. China's official energy statistics have limited information on energy demand by end use. This is a particularly pertinent issue for building energy consumption. The authors have applied reasoned judgments, based on experience of working on Chinese efficiency standards and energy related programs, to present a realistic interpretation of the current energy data. The bottom-up approach allows detailed consideration of end use intensity, equipment efficiency, etc., thus facilitating assessment of potential impacts of specific policy and technology changes on building energy use. The results suggest that: (1) commercial energy consumption in China's current statistics is underestimated by about 44%, and the fuel mix is misleading; (2) energy efficiency improvements will not be sufficient to offset the strong increase in end-use penetration and intensity in commercial buildings; (3) energy intensity (particularly electricity) in commercial buildings will increase; (4) different GDP growth and elasticity scenarios could lead to a wide range of floor area growth trajectories , and therefore, significantly impact energy consumption in commercial buildings.

  18. The impact of state energy programs and other contextual factors on U.S. buildings energy consumption

    Science.gov (United States)

    Ofori-Boadu, Andrea N. Y. A.

    High energy consumption in the United States has been influenced by populations, climates, income and other contextual factors. In the past decades, U.S. energy policies have pursued energy efficiency as a national strategy for reducing U.S. environmental degradation and dependence on foreign oils. The quest for improved energy efficiency has led to the development of energy efficient technologies and programs. The implementation of energy programs in the complex U.S. socio-technical environment is believed to promote the diffusion of energy efficiency technologies. However, opponents doubt the fact that these programs have the capacity to significantly reduce U.S. energy consumption. In order to contribute to the ongoing discussion, this quantitative study investigated the relationships existing among electricity consumption/ intensity, energy programs and contextual factors in the U.S. buildings sector. Specifically, this study sought to identify the significant predictors of electricity consumption and intensity, as well as estimate the overall impact of selected energy programs on electricity consumption and intensity. Using state-level secondary data for 51 U.S. states from 2006 to 2009, seven random effects panel data regression models confirmed the existence of significant relationships among some energy programs, contextual factors, and electricity consumption/intensity. The most significant predictors of improved electricity efficiency included the price of electricity, public benefits funds program, building energy codes program, financial and informational incentives program and the Leadership in Energy and Environmental Design (LEED) program. Consistently, the Southern region of the U.S. was associated with high electricity consumption and intensity; while the U.S. commercial sector was the greater benefactor from energy programs. On the average, energy programs were responsible for approximately 7% of the variation observed in electricity consumption

  19. Modelling Domestic Lighting Energy Consumption in Romania by Integrating Consumers Behavior

    OpenAIRE

    Adriana Reveiu; Ion Smeureanu; Marian Dardala; Roman Kanala

    2015-01-01

    Sustainable energy consumption is a research area of a large interest in last years. New energy efficient lighting technologies exist which can significantly reduce household electricity consumption but their adoption has been slow. A considerable number of international studies show that sustainable development scenarios will be realistic if they involve the human behavior. The paper provides a solution to integrate consumer behavior with techno economic energy issues inside a complex energy...

  20. The impact of relative energy prices on industrial energy consumption in China: a consideration of inflation costs.

    Science.gov (United States)

    He, Lingyun; Ding, Zhihua; Yin, Fang; Wu, Meng

    2016-01-01

    Significant effort has been exerted on the study of economic variables such as absolute energy prices to understand energy consumption and economic growth. However, this approach ignores general inflation effects, whereby the prices of baskets of goods may rise or fall at different rates from those of energy prices. Thus, it may be the relative energy price, not the absolute energy price, that has most important effects on energy consumption. To test this hypothesis, we introduce a new explanatory variable, the domestic relative energy price, which we define as "the ratio of domestic energy prices to the general price level of an economy," and we test the explanatory power of this new variable. Thus, this paper explores the relationship between relative energy prices and energy consumption in China from the perspective of inflation costs over the period from 1988 to 2012. The direct, regulatory and time-varying effects are captured using methods such as ridge regression and the state-space model. The direct impacts of relative energy prices on total energy consumption and intensity are -0.337 and -0.250, respectively; the effects of comprehensive regulation on energy consumption through the economic structure and the energy structure are -0.144 and -0.148, respectively; and the depressing and upward effects of rising and falling energy prices on energy consumption are 0.3520 and 0.3564, respectively. When economic growth and the energy price level were stable, inflation persisted; thus, rising energy prices benefitted both the economy and the environment. Our analysis is important for policy makers to establish effective energy-pricing policies that ensure both energy conservation and the stability of the pricing system.

  1. Consumption of Energy in New York State: 1972 (with Estimates for 1973).

    Science.gov (United States)

    Hausgaard, Olaf

    This report contains tabular data on energy consumption for the calendar year 1972 and a forecast of natural gas requirements for the period 1973 to 1976. Broad sector categories used in the tables are electric utilities, residential commercial, industrial, and transportation. Tables show energy consumption by primary source and major sector for…

  2. A US-China Interview Study: Biology Students' Argumentation and Explanation about Energy Consumption Issues

    Science.gov (United States)

    Jin, Hui; Hokayem, Hayat; Wang, Sasha; Wei, Xin

    2016-01-01

    As China and the United States become the top two carbon emitters in the world, it is crucial for citizens in both countries to construct a sophisticated understanding of energy consumption issues. This interview study examines how U.S. and Chinese students compare in explaining and arguing about two critical energy consumption issues: burning…

  3. The effect of different transitional spaces on thermal comfort and energy consumption of residential buildings

    NARCIS (Netherlands)

    Taleghani, M.; Tenpierik, M.J.; Van den Dobbelsteen, A.A.J.F.

    2012-01-01

    Purpose- This paper focuses on the effect of courtyards, atria and sunspaces on indoor thermal comfort and energy consumption for heating and cooling. One of the most important purposes is to understand if certain transitional spaces can reduce the energy consumption of and improve thermal comfort

  4. Guided design of heating and cooling mains for lower water and energy consumption and increased efficiency

    CSIR Research Space (South Africa)

    Gololo, V

    2011-01-01

    Full Text Available Water cooling and water heating is an important source of energy consumption, accounting for more than 20% of all energy consumption in manufacturing industry. It is clear that the development of heat recycling schemes and better structural design...

  5. Input-Output Modeling for Urban Energy Consumption in Beijing: Dynamics and Comparison

    Science.gov (United States)

    Zhang, Lixiao; Hu, Qiuhong; Zhang, Fan

    2014-01-01

    Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making. PMID:24595199

  6. Analysis of variables that influence electric energy consumption in commercial buildings in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, M.M.Q. [Technical Drawing Department, Fluminense Federal University, Niteroi, Rio de Janeiro (Brazil); Energy Planning Program, Alberto Luiz Coimbra Institute for Research and Graduate Studies in Engineering - COPPE, Federal University of Rio de Janeiro, Rio de Janeiro (Brazil); La Rovere, E.L. [Energy Planning Program, Alberto Luiz Coimbra Institute for Research and Graduate Studies in Engineering - COPPE, Federal University of Rio de Janeiro, Rio de Janeiro (Brazil); Goncalves, A.C.M. [Program for Graduate Studies in Architecture, School of Architecture and Urbanism, Federal University of Rio de Janeiro, Rio de Janeiro (Brazil)

    2010-12-15

    Air conditioning systems in commercial buildings in Brazil are responsible for about 70% share of their energy consumption. According to BEN 2009 (The Brazilian Energy Balance), energy consumption in the residential, commercial and public sectors, where most buildings are found, represents 9.3% of the final energy consumption in Brazil. This paper aims to examine design factors that could contribute to greater reductions of electric energy consumption in commercial buildings, with emphasis on air conditioning. Simulations were carried out using shades and different types of glass, walls, flooring and roofing. The VisualDOE 2.61 was used as a simulation tool for calculating energy consumption of the analyzed building. This paper shows that the energy performance of the building is considerably influenced by the facade protection and shows, through tables, the impact that decisions related to the top-level and facades have on the energy consumption of the building. The authors concluded that the results confirm the importance of taking energy use into account in the very first design stages of the project, since appropriate choices of types of glass, external shading and envelope materials have a significant impact on energy consumption. (author)

  7. Input-output modeling for urban energy consumption in Beijing: dynamics and comparison.

    Directory of Open Access Journals (Sweden)

    Lixiao Zhang

    Full Text Available Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making.

  8. Generalized Scaling of Urban Heat Island Effect and Its Applications for Energy Consumption and Renewable Energy

    Directory of Open Access Journals (Sweden)

    T.-W. Lee

    2014-01-01

    Full Text Available In previous work from this laboratory, it has been found that the urban heat island intensity (UHI can be scaled with the urban length scale and the wind speed, through the time-dependent energy balance. The heating of the urban surfaces during the daytime sets the initial temperature, and this overheating is dissipated during the night-time through mean convection motion over the urban surface. This may appear to be in contrast to the classical work by Oke (1973. However, in this work, we show that if the population density is used in converting the population data into urbanized area, then a good agreement with the current theory is found. An additional parameter is the “urban flow parameter,” which depends on the urban building characteristics and affects the horizontal convection of heat due to wind. This scaling can be used to estimate the UHI intensity in any cities and therefore predict the required energy consumption during summer months. In addition, all urbanized surfaces are expected to exhibit this scaling, so that increase in the surface temperature in large energy-consumption or energy-producing facilities (e.g., solar electric or thermal power plants can be estimated.

  9. Energy consumption of mobile communication systems; Energieverbrauch der mobilen Kommunikation - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Corliano, A.; Hufschmid, M.

    2008-02-15

    This final report for the Swiss Federal Office of Energy (SFOE) reports on a research project that was concerned with the energy consumption of the infrastructure necessary to provide mobile communication services. The measurement and analysis of the energy consumption of the infrastructure was an essential part of this research project. Furthermore, future scenarios and their impact on energy consumption are discussed. The results of the research work are presented and the correlation between power requirements and the data traffic encountered at GSM and UMTS base stations is analysed. Furthermore, measurements that were conducted to determine the power consumption of different network elements are discussed. Finally, alternatives for further action and recommendations for improvements in the energy consumption of such installations are formulated.

  10. Interactions Between Energy Drink Consumption and Sleep Problems: Associations with Alcohol Use Among Young Adolescents.

    Science.gov (United States)

    Marmorstein, Naomi R

    2017-09-01

    Background: Energy drink consumption and sleep problems are both associated with alcohol use among adolescents. In addition, caffeine consumption (including energy drinks) is associated with sleep problems. However, information about how these three constructs may interact is limited. The goal of this study was to examine potential interactions between energy drink consumption and sleep problems in the concurrent prediction of alcohol use among young adolescents. Coffee and soda consumption were also examined for comparison. Methods: Participants from the Camden Youth Development Study were included (n = 127; mean age = 13.1; 68% Hispanic, 29% African American) and questionnaire measures of frequency of caffeinated beverage consumption (energy drinks, coffee, and soda), sleep (initial insomnia, sleep disturbances, daytime fatigue, and sleep duration), and alcohol consumption were used. Regression analyses were conducted to examine interactions between caffeinated beverage consumption and sleep in the concurrent prediction of alcohol use. Results: Energy drink consumption interacted with initial insomnia and daytime fatigue to concurrently predict particularly frequent alcohol use among those with either of these sleep-related problems and energy drink consumption. The pattern of results for coffee consumption was similar for insomnia but reached only a trend level of significance. Results of analyses examining soda consumption were nonsignificant. Conclusions: Young adolescents who both consume energy drinks and experience initial insomnia and/or daytime fatigue are at particularly high risk for alcohol use. Coffee consumption appears to be associated with similar patterns. Longitudinal research is needed to explain the developmental pathways by which these associations emerge, as well as mediators and moderators of these associations.

  11. Greenhouse Gas Emissions, Energy Consumption and Economic Growth: A Panel Cointegration Analysis for 16 Asian Countries

    Science.gov (United States)

    2017-01-01

    This research investigates the co-movement and causality relationships between greenhouse gas emissions, energy consumption and economic growth for 16 Asian countries over the period 1990–2012. The empirical findings suggest that in the long run, bidirectional Granger causality between energy consumption, GDP and greenhouse gas emissions and between GDP, greenhouse gas emissions and energy consumption is established. A non-linear, quadratic relationship is revealed between greenhouse gas emissions, energy consumption and economic growth, consistent with the environmental Kuznets curve for these 16 Asian countries and a subsample of the Asian new industrial economy. Short-run relationships are regionally specific across the Asian continent. From the viewpoint of energy policy in Asia, various governments support low-carbon or renewable energy use and are reducing fossil fuel combustion to sustain economic growth, but in some countries, evidence suggests that energy conservation might only be marginal. PMID:29165399

  12. Greenhouse Gas Emissions, Energy Consumption and Economic Growth: A Panel Cointegration Analysis for 16 Asian Countries.

    Science.gov (United States)

    Lu, Wen-Cheng

    2017-11-22

    This research investigates the co-movement and causality relationships between greenhouse gas emissions, energy consumption and economic growth for 16 Asian countries over the period 1990-2012. The empirical findings suggest that in the long run, bidirectional Granger causality between energy consumption, GDP and greenhouse gas emissions and between GDP, greenhouse gas emissions and energy consumption is established. A non-linear, quadratic relationship is revealed between greenhouse gas emissions, energy consumption and economic growth, consistent with the environmental Kuznets curve for these 16 Asian countries and a subsample of the Asian new industrial economy. Short-run relationships are regionally specific across the Asian continent. From the viewpoint of energy policy in Asia, various governments support low-carbon or renewable energy use and are reducing fossil fuel combustion to sustain economic growth, but in some countries, evidence suggests that energy conservation might only be marginal.

  13. Greenhouse Gas Emissions, Energy Consumption and Economic Growth: A Panel Cointegration Analysis for 16 Asian Countries

    Directory of Open Access Journals (Sweden)

    Wen-Cheng Lu

    2017-11-01

    Full Text Available This research investigates the co-movement and causality relationships between greenhouse gas emissions, energy consumption and economic growth for 16 Asian countries over the period 1990–2012. The empirical findings suggest that in the long run, bidirectional Granger causality between energy consumption, GDP and greenhouse gas emissions and between GDP, greenhouse gas emissions and energy consumption is established. A non-linear, quadratic relationship is revealed between greenhouse gas emissions, energy consumption and economic growth, consistent with the environmental Kuznets curve for these 16 Asian countries and a subsample of the Asian new industrial economy. Short-run relationships are regionally specific across the Asian continent. From the viewpoint of energy policy in Asia, various governments support low-carbon or renewable energy use and are reducing fossil fuel combustion to sustain economic growth, but in some countries, evidence suggests that energy conservation might only be marginal.

  14. Reducing heating and cooling energy consumption in the building using ceiling fans

    Energy Technology Data Exchange (ETDEWEB)

    Nadoushan, A.A.; Abedi, A.; Bahrami, A. [Islamic Azad Univ., Isfahan (Iran, Islamic Republic of)

    2007-07-01

    Annual energy consumption in Iran is equal to 80 million tons of oil with 30 to 50 per cent of this energy being consumed in the form of electricity. Electricity consumption has also been increasing by 17 per cent each year. To supply this growing energy requirement, new capacities to generate energy are needed, such as establishing new power plants. Another solution to the problem is to improve energy consumption efficiency. An efficient way to improve energy consumption efficiency in buildings is through the use of ceiling fans. This paper presented a case study of an 18 floor building in Tehran, Iran that examined heat and cooling energy consumption in the building using ceiling fans. The paper discussed heating and cooling loads determination, including governing equations; equations related to external walls; equations related to the floor; equations related to the ceiling; equations related to the external doors and external glazing; equations related to internal walls; equations related to room air; determination of outdoor temperature; and determination of radiation quantity. Numerical calculations, the studied building, and cooling load determination were then discussed. It was concluded that ceiling fans were an efficient way to improve energy consumption efficiency. Cooling energy was reduced 39 per cent per year. Using 432 ceiling fans in the studied building reduced the annual cooling load consumption by 39.16 per cent and the annual heating load by 5.3 per cent. 10 refs., 3 tabs., 5 figs.

  15. Occupant behavior and energy consumption in dwellings: An analysis of behavioral models and actual energy consumption in the dutch housing stock

    Directory of Open Access Journals (Sweden)

    Merve Bedir

    2017-11-01

    Full Text Available Much is known about the increasing levels of energy consumption and environmental decay caused by the built environment. Also, more and more attention is shown to the energy consumption of dwellings, from the early design stage until the occupants start living in them. The increasing complexity of building technologies, the occupants’ preferences, and their needs and demands make it difficult to achieve the aimed energy consumption levels. The goal of reducing the energy consumption of dwellings and understanding the share of occupant behavior in it form the context of this research. Several studies have demonstrated the ‘energy performance gap’ between the calculated and the actual energy consumption levels of buildings, and have explored the reasons for it. The energy performance gap is either caused by calculation drawbacks, uncertainties of modeling weather conditions, construction defects regarding air tightness and insulation levels, or by occupant behavior. This research focuses on the last aspect, i.e. analyzing the relationship between occupant behavior and energy consumption in dwellings, understanding the determinants of energy consumption, and finding occupants’ behavioral patterns. There are several dimensions of occupant behavior and energy consumption of dwellings: dwelling characteristics including the energy and indoor comfort management systems, building envelope, lighting and appliances; occupant characteristics including the social, educational and economical; and actual behavior, including the control of heating, ventilation and lighting of spaces, and appliance use, hot water use, washing, bathing, and cleaning. Attempting to understand this complexity asks for a methodology that covers both quantitative and qualitative methods; and both cross-sectional and longitudinal data collection, working interdisciplinary among the domains of design for sustainability, environmental psychology, and building and design

  16. A study of energy consumption in turning process using lubrication of nanoparticles enhanced coconut oil (NECO)

    Science.gov (United States)

    Mansor, A. F.; Zakaria, M. S.; Azmi, A. I.; Khalil, A. N. M.; Musa, N. A.

    2017-10-01

    Cutting fluids play very important role in machining application in order to increase tool life, surface finish and reduce energy consumption. Instead of using petrochemical and synthetic based cutting fluids, vegetable oil based lubricants is safety for operators, environmental friendly and become more popular in the industrial applications. This research paper aims to find the advantage of using vegetable oils (coconut oil) with additional of nano particles (CuO) as lubricant to the energy consumption during machining process. The energy was measured for each run from 2 level factorial experimental layout. Obtained results illustrate that lubricant with enhancement of nanoparticles has capability to improve the energy consumption during the machining process.

  17. Reduction in Energy Consumption & Variability in Steel Foundry Operations

    Energy Technology Data Exchange (ETDEWEB)

    Frank Peters

    2005-05-04

    large process variation. This indicates the need for ongoing monitoring of the process and system to quantify the effort being expended. A system to measure the grinding effort was investigated but did not prove to be successful. A weld wire counting system was shown to be very successful in tracking casting quality by monitoring the quantity of weld wire being expended on a per casting basis. Further use of such systems is highly recommended. The field studies showed that the visual inspection process for the casting surface was a potentially large source of process variation. Measurement system analysis studies were conducted at three steel casting producers. The tests measured the consistency of the inspectors in identifying the same surface anomalies. The repeatability (variation of the same operator inspecting the same casting) was found to be relatively consistent across the companies at about 60-70%. However, this is still are very large amount of variation. Reproducibility (variation of different operators inspecting the same casting) was worse, ranging between 20 to 80% at the three locations. This large amount of variation shows that there is a great opportunity for improvement. Falsely identifying anomalies for reworking will cause increased expense and energy consumption. This is particularly true if a weld repair and repeated heat treatment is required. However, not identifying an anomaly could also result in future rework processing, a customer return, or scrap. To help alleviate this problem, casting surface comparator plates were developed and distributed to the industry. These plates are very inexpensive which enables them to be provided to all those involved with casting surface quality, such as operators, inspectors, sales, and management.

  18. Estimating potential saving with energy consumption behaviour model in higher education institutions

    Directory of Open Access Journals (Sweden)

    Mohd Hafizal Ishak

    2016-11-01

    Full Text Available Towards sustainable Higher Education Institutions (HEIs, energy consumption behaviour is one of several issues that require an attention by facilities manager. Information from the behavioural aspect would be useful for facilities manager on managing the energy and determining potential energy saving. A lack of information negatively affects this aim. Hence, this paper proposes a methodology for assessing the energy consumption behaviour with the objective determining potential energy saving. The method used energy culture framework as basis and joined with centrographic approach and multiple-regression analysis. A self-administrated survey carried out involving 1400 respondents in selected HEIs. There are four types of energy use among students in HEIs namely, 'high', 'low', ‘medium’ and 'conserve' determined from the centrographic analysis. The energy consumption behaviour model was developed and tested against the holdout sample. Through the model's application, there is a vast potential for energy savings with over 55 kWh daily among the students.

  19. Is the Consumption of Energy Drinks Associated With Academic Achievement Among College Students?

    Science.gov (United States)

    Champlin, Sara E; Pasch, Keryn E; Perry, Cheryl L

    2016-08-01

    Despite widely reported side effects, use of energy drinks has increased among college students, who report that they consume energy drinks to help them complete schoolwork. However, little is known about the association between energy drink use and academic performance. We explored the relationship between energy drink consumption and current academic grade point average (GPA) among first-year undergraduate students. Participants included 844 first-year undergraduates (58.1 % female; 50.7 % White). Students reported their health behaviors via an online survey. We measured energy drink consumption with two measures: past month consumption by number of drinks usually consumed in 1 month and number consumed during the last occasion of consumption. We used multiple linear regression modeling with energy drink consumption and current GPA, controlling for gender, race, weekend and weekday sleep duration, perceived stress, perceived stress management, media use, and past month alcohol use. We found that past month energy drink consumption quantity by frequency (p energy drinks consumed during the last occasion (p Energy drinks consumed during the last occasion of consumption (p = 0.01) remained significantly associated with a lower GPA when controlling for alcohol use. While students report using energy drinks for school-related reasons, our findings suggest that greater energy drink consumption is associated with a lower GPA, even after controlling for potential confounding variables. Longitudinal research is needed that addresses whether GPA declines after continued use of energy drinks or if students struggling academically turn to energy drinks to manage their schoolwork.

  20. Vehicle energy consumption - A contribution to the Coherent Energy and Environmental System Analysis (CEESA) project

    Energy Technology Data Exchange (ETDEWEB)

    Schaltz, E.

    2011-01-15

    In this report simulation models of a Battery Electric Vehicle (BEV) and a Fuel Cell Hybrid Electric Vehicle (FCHEV) have been developed. The models have two features: they both design the vehicles and calculates the energy consumption, efficiency, mass, volume, and cost due to a given drive cycle. The vehicles are designed to fulfill a drive cycle which consist of city, road, and motorway driving, as it is desired that the vehicles should have the same performance as traditional internal combustion engine (ICE) vehicles. For this reason its also chosen to use a midsize car, i.e. a Toyota Avensis, as reference vehicle. The simulation models consist of several sub-models, which have been modeled by use of data sheets. The models have therefore not been verified be experimental results, which is strongly recommenced for future work. The energy consumption per km and efficiency are significant better for the BEV than for the FCHEV. The average energy consumption per km is 304.1 Wh/km and 635.7 Wh/km for the BEV and FCHEV, respectively. The average tank-to-wheel efficiency of the BEV and FCHEV are 54.0% and 23.4%, respectively. For the total car mass and cost and volume of the power system, the results are two-sided. For short distance the BEV is lighter, has smaller volume of the power system, and are cheaper than the FCHEV. However, when the traveling distance increases the difference becomes smaller, and at long distances the FCHEV are the lightest, smallest, and cheapest. (Author)

  1. Reducing Operating Costs and Energy Consumption at Water Utilities

    Science.gov (United States)

    Due to their unique combination of high energy usage and potential for significant savings, utilities are turning to energy-efficient technologies to help save money. Learn about cost and energy saving technologies from this brochure.

  2. [Method for grading industrial sectors in energy consumption and its application].

    Science.gov (United States)

    Mao, Jian-Su; Ma, Lan

    2013-04-01

    Energy is mainly consumed by the urban industry system, thus grading industrial sectors for their energy consumption may help to identify the concerned industrial sectors and provide necessary information for industrial energy management in China's industrialization and urbanization. In present article, based on a review of the fundamental relationships between energy consumption and industrial sectors, the contribution rates and energy efficiency of industrial sectors are chosen as typical parameters for energy consumption. The concept of distance index of industrial sectors for energy consumption is defined through China's average level as a reference base. The grade of industrial sectors in energy consumption is classed into 9 types from extreme advantage to extreme disadvantage according to the scope of distance index values, and the types of industrial sectors that need to be more concerned are pointed out. Taking Chongqing as a case study, the application for grading industrial sectors for their energy consumption was exhibited, by which, the main industrial sectors are grated and the industrial sectors that should be special concerned in energy management are determined.

  3. Energy consumption and economic growth nexus in Tanzania: An ARDL bounds testing approach

    Energy Technology Data Exchange (ETDEWEB)

    Odhiambo, Nicholas M. [Economics Department, University of South Africa (UNISA), P.O. Box 392, UNISA, 0003, Pretoria (South Africa)], E-mail: nmbaya99@yahoo.com

    2009-02-15

    In this paper, we examine the intertemporal causal relationship between energy consumption and economic growth in Tanzania during the period of 1971-2006. Unlike the majority of the previous studies, we employ the newly developed autoregressive distributed lag (ARDL)-bounds testing approach by Pesaran et al. [2001. Bounds testing approaches to the analysis of level relationships. Journal of Applied Econometrics 16, 289-326] to examine this linkage. We also use two proxies of energy consumption, namely total energy consumption per capita and electricity consumption per capita. The results of the bounds test show that there is a stable long-run relationship between each of the proxies of energy consumption and economic growth. The results of the causality test, on the other hand, show that there is a unidirectional causal flow from total energy consumption to economic growth and a prima-facie causal flow from electricity consumption to economic growth. Overall, the study finds that energy consumption spurs economic growth in Tanzania.

  4. Energy consumption and economic growth nexus in Tanzania. An ARDL bounds testing approach

    Energy Technology Data Exchange (ETDEWEB)

    Odhiambo, Nicholas M. [Economics Department, University of South Africa (UNISA), P.O. Box 392, UNISA, 0003, Pretoria (South Africa)

    2009-02-15

    In this paper, we examine the intertemporal causal relationship between energy consumption and economic growth in Tanzania during the period of 1971-2006. Unlike the majority of the previous studies, we employ the newly developed autoregressive distributed lag (ARDL)-bounds testing approach by Pesaran et al. [2001. Bounds testing approaches to the analysis of level relationships. Journal of Applied Econometrics 16, 289-326] to examine this linkage. We also use two proxies of energy consumption, namely total energy consumption per capita and electricity consumption per capita. The results of the bounds test show that there is a stable long-run relationship between each of the proxies of energy consumption and economic growth. The results of the causality test, on the other hand, show that there is a unidirectional causal flow from total energy consumption to economic growth and a prima-facie causal flow from electricity consumption to economic growth. Overall, the study finds that energy consumption spurs economic growth in Tanzania. (author)

  5. Are shocks to renewable energy consumption permanent or temporary? Evidence from 54 developing and developed countries.

    Science.gov (United States)

    Demir, Ender; Gozgor, Giray

    2018-02-01

    The renewable energy sources are considered as the important factor to decrease the level of carbon emissions and to promote the global green economy. Understanding the dynamics of renewable energy consumption, this paper analyzes whether there is a unit root in renewable energy consumption in 54 countries over the period 1971-2016. To this end, the unit root test of Narayan-Popp with two endogenous (unknown) breaks is implemented. The paper finds that renewable energy consumption series are stationary around a level and the time trend in 45 of 54 countries. In other words, renewable energy consumption follows a unit root process only in nine countries: Brazil, China, Colombia, India, Israel, Japan, the Netherlands, Spain, and Turkey. The evidence implies that renewable energy demand policies, which aimed to decrease the carbon emissions, will only have permanent effects in those nine countries.

  6. Modeling an impact of road geometric design on vehicle energy consumption

    Science.gov (United States)

    Luin, Blaž; Petelin, Stojan; Al-Mansour, Fouad

    2017-11-01

    Some roads connect traffic origins and destinations directly, some use winding, indirect routes. Indirect connections result in longer distances driven and increased fuel consumption. A similar effect is observed on congested roads and mountain roads with many changes in altitude. Therefore a framework to assess road networks based on energy consumption is proposed. It has been shown that road geometry has significant impact on overall traffic energy consumption and emissions. The methodology presented in the paper analyzes impact of traffic volume, shares of vehicle classes, road network configuration on the energy used by the vehicles. It can be used to optimize energy consumption with efficient traffic management and to choose optimum new road in the design phase. This is especially important as the energy consumed by the vehicles shortly after construction supersedes the energy spent for the road construction.

  7. Analysis of U.S. household wood energy consumption: 1967-2009

    Science.gov (United States)

    Nianfu. Song; Francisco X. Aguilar; Stephen R. Shifley; Michael E. Goerndt

    2012-01-01

    The residential sector consumes about 23% of the energy derived from wood (wood energy) in the U.S. An estimated error correction model with data from 1967 to 2009 suggests that residential wood energy consumption has declined by an average 3% per year in response to technological progress, urbanization, accessibility of non-wood energy, and other factors associated...

  8. Power to the Plug: An Introduction to Energy, Electricity, Consumption and Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    DOE / EERE / NEED Project

    2011-06-07

    The NEED Project and the U.S. Department of Energy have collaborated to bring you this educational four-page guide to energy, electricity, consumption and efficiency. It includes, on the last page, a home energy survey to help you analyze your home energy use.

  9. ANALYSIS OF ENERGY CONSUMPTION IN THE FACILITIES OF THE CIECHANÓW DAIRY COOPERATIVE

    Directory of Open Access Journals (Sweden)

    Marek Gugała

    2015-06-01

    Full Text Available The work presents the analysis of electric energy consumption in individual buildings of the Ciechanów Dairy Cooperative in 2011. The plant includes a cool storage facility, a boiler house, a compression room and CIP (Cleaning In Place stations. The plant manufactures liquid milk, cream, cheese, cottage cheese, cream cheese, butter and yoghurts. In 2011, the total electric energy consumption in the Cechanów Dairy Cooperative was 873114.0 kWh. The highest energy consumption (556430.0 kWh0 was recorded for the cooler (63.7% of total consumption and the lowest for CIP stations (33084.0 kWh. The average electric energy consumption in the Cooperative plant was 72759.5 kWh, the highest (104800.6 kWh in November and the lowest (40000.6 kWh in March.

  10. Killing the Buzz: Reducing Youth Consumption of Energy Drinks in British Columbia

    OpenAIRE

    Mirski, Pawel Lukasz

    2014-01-01

    Recent medical studies and international prevalence data on energy drink consumption indicate that children, adolescents and teenagers are at risk of serious short and long term negative health effects due to the high amounts of caffeine in energy drinks. Current research demonstrates that energy drink consumption may cause exacerbated mood and behavioural disorders, seizures, and serious cardiovascular problems. Research into the long term health effects is nascent but warrants further resea...

  11. Energy drink consumption is associated with unhealthy dietary behaviours among college youth.

    Science.gov (United States)

    Poulos, Natalie S; Pasch, Keryn E

    2015-11-01

    Energy drink consumption has been associated with a variety of health risk behaviours, yet little research has explored the relationship between energy drinks and dietary behaviours of emerging adults. Therefore, the purpose of this study was to explore the relationship between energy drink consumption and dietary behaviours among energy drink users and non-users within a sample of college youth. College freshmen (n = 585, m age = 18.7 years; 47% non-Hispanic White, 20.9% Hispanic, 25.5% Asian, 2.7% non-Hispanic Black and 4.4% other; 56% female), at a large, southwest university self-reported their energy drink consumption in the past week and a variety of dietary behaviours, including past week soda, diet soda, pre-packaged salty snacks, pre-packaged sweet snacks, fast food, restaurant food, frozen food, fruits, vegetables, milk and breakfast consumption. Linear regression analyses were run to determine associations between energy drink consumption and dietary behaviour among users and non-users of energy drinks. Analyses controlled for gender, race/ethnicity and body mass index (BMI). Overall, 17.5% of students had consumed energy drinks in the past week. Energy drink users were more likely to be male, White and have a greater BMI. Students also reported low past week intake of fruits, vegetables, milk and breakfast. Past week energy drink consumption was associated with increased soda and frozen meal consumption. Given a rapidly expanding energy drink market, future dietary interventions among college youth may want to consider the implications of energy drinks, as results of this study suggest consumption of these beverages is associated with unhealthy dietary behaviours and a greater BMI. © Royal Society for Public Health 2015.

  12. Modelling Domestic Lighting Energy Consumption in Romania by Integrating Consumers Behavior

    OpenAIRE

    Adriana REVEIU; Smeureanu, Ion; Marian DARDALA; Kanala, Roman

    2015-01-01

    Sustainable energy consumption is a research area of a large interest in last years. New energy-efficient lighting technologies exist, which can significantly reduce household electricity consumption, but their adoption has been slow. A considerable number of international studies show that sustainable development scenarios will be realistic if they involve the human behavior. The paper provides a solution to integrate consumer behavior with techno-economic energy issues, inside a complex ene...

  13. Modeling Domestic Lighting Energy Consumption in Romania and Integrating Consumers’ Behavior

    OpenAIRE

    Ion Smeureanu; Roman Kanala; Adriana Reveiu; Marian Dardala

    2015-01-01

    Sustainable energy consumption is a research area of a large interest in the last years. New energy efficient lighting technologies exist and can significantly reduce household electricity consumption but their adoption has been slow. A considerable number of international studies show that sustainable development scenarios will be realistic if they involve the human behavior. The paper provides a solution to integrate consumer behavior with techno economic energy issues inside a complex ener...

  14. Impact of Window Films on the Overall Energy Consumption of Existing UK Hotel Buildings

    Directory of Open Access Journals (Sweden)

    Ali Bahadori-Jahromi

    2017-05-01

    Full Text Available Recently, considerable attention has justifiably been directed towards energy savings in buildings as they account for up to 20–40% of total energy consumption in developed countries. In the United Kingdom, studies have revealed that buildings’ CO2 emissions for account for at least 43% of total emissions. Window panels are a major component of the building fabric with considerable influence on the façade energy performance and are accountable for up to 60% of a building’s overall energy loss. Therefore, the thermal performance of glazing materials is an important issue within the built environment. This work evaluates the impact of solar window films on the overall energy consumption of an existing commercial building via the use of a case study U.K. hotel and TAS dynamic simulation software. The study results demonstrated that the impact of window films on the overall energy consumption of the case study hotel is approximately 2%. However, an evaluation of various overall energy consumption components showed that the window films reduce the annual total cooling energy consumption by up to 35% along with a marginal 2% increase in the annual total heating energy consumption. They can also provide overall cost and CO2 emissions savings of up to 3%.

  15. Electricity consumption and energy efficiency in agricultural factories; Stromverbrauch und Energieeffizienz im landwirtschaftlichen Betrieb

    Energy Technology Data Exchange (ETDEWEB)

    Neser, Stefan; Neiber, Josef; Bonkoss, Katja [Bayerische Landesanstalt fuer Landwirtschaft, Freising (Germany). Inst. fuer Landtechnik und Tierhaltung

    2012-11-15

    One main approach for energy conservation in pig farming factories is in the area of ventilation and the climate in the stable. The electricity consumption can be reduced significantly by means of aerodynamically favourable design of airflow and optimal dimensioning of the ventilation system as well as by control technology such as frequency control and EC technology. In the case of dairy cattle farming factories, the main approach for energy conservation is in the area of milk removal and cooling of milk. The energy consumption can be reduced significantly by energy efficient plants such as frequency controlled vacuum pumps, pre-cooling and heat-recovery. Fundamentally, beside the criterion electricity consumption, other criteria such as water consumption, functional reliability and the quality of the process should be considered in the decision-making in order to develop an energy efficient overall process. Especially the specific energy consumption of the individual components should be considered at new investments and replacement investments. The consideration of the factorial development as well as the actual and planned energy supply of the factory are of great importance due to the increasing energy prices. Thus, in future the reduction of the maximal power consumption and the factorial load management are of importance with respect to the adjustment to the profiles of power generation from renewable energies.

  16. Energy-efficient Building in Greenland: Investigation of the Energy Consumption and Indoor Climate

    DEFF Research Database (Denmark)

    Luc, Katarzyna Marta; Kotol, Martin; Lading, Tove

    2016-01-01

    Recently, a brand new single family home was built in Sisimiut, Greenland. The building was constructed as a wooden house typical for Greenland. However, some non-traditional measures were implemented in order to reduce the energy consumption and improve indoor air quality. Assessment...... of the influence of these measures is essential for their implementation on a wider scale. In particular, functionality of the state of the art ventilation system is of large concern as these systems have not been commonly used for their sensitivity towards the extremely cold climate. A detailed monitoring system...... a computer model. The data obtained from the measurements in the new house were used to verify the model. Significant energy savings and improvements of indoor air quality were found in the new house when compared to the traditional one. Moreover, all the extra measures have a feasible payback time despite...

  17. Energy-efficient Building in Greenland: Investigation of the Energy Consumption and Indoor Climate

    DEFF Research Database (Denmark)

    Luc, Katarzyna Marta; Kotol, Martin; Lading, Tove

    2015-01-01

    Recently, a brand new single family home was built in Sisimiut, Greenland. The building was constructed as a wooden house typical for Greenland. However, some non-traditional measures were implemented in order to reduce the energy consumption and improve indoor air quality. Assessment...... of the influence of these measures is essential for their implementation on a wider scale. In particular, functionality of the state of the art ventilation system is of large concern as these systems have not been commonly used for their sensitivity towards the extremely cold climate. A detailed monitoring system...... a computer model. The data obtained from the measurements in the new house were used to verify the model. Significant energy savings and improvements of indoor air quality were found in the new house when compared to the traditional one. Moreover, all the extra measures have a feasible payback time despite...

  18. The Factors Influencing Transport Energy Consumption in Urban Areas: a Review

    Directory of Open Access Journals (Sweden)

    Rocco Papa

    2014-05-01

    Full Text Available Transport energy consumption accounts for about one third of total energy consumption in EU. Despite significant advances in transport technology and fuel formulation, transport energy consumption has increased in most EU countries over the last three decades. This increase in consumption occurred as a result of factors such as higher car ownership, a growth in automobile use and an increase in vehicle distances traveled. As travel and land-use are a function of one another, it is often hypothesized that changing urban structure can result in changes in energy consumption. Understanding how different land use characteristics may influence travel behaviour and the corresponding energy consumption is crucial for planners and policy makers in order to develop strategic actions to shrink the environmental footprint of the urban transportation sector. The aim of this article is to review the current literature on the connections between land use, travel behavior and energy consumption. In particular, this paper seeks to identify the determinants of transport energy consumption in urban areas by reviewing evidence from empirical studies. To this aim, nine characteristics of land use are presented and their effects on both travel behaviour and energy use are discussed Our review shown that, in contrast to the focus on the effect of the built environment on travel, only few researchers have empirically investigated the linkage between the built environment and transportation energy use. The research described in this paper has been developed within the PON04a2_E Smart Energy Master project. It represents part of a much broader research project aimed at the development of an integrated model of urban energy efficiency.

  19. Detrimental effects of energy drink consumption on platelet and endothelial function.

    Science.gov (United States)

    Worthley, Matthew I; Prabhu, Anisha; De Sciscio, Paolo; Schultz, Carlee; Sanders, Prashanthan; Willoughby, Scott R

    2010-02-01

    Energy drink consumption has been anecdotally linked with sudden cardiac death and, more recently, myocardial infarction. As myocardial infarction is strongly associated with both platelet and endothelial dysfunction, we tested the hypothesis that energy drink consumption alters platelet and endothelial function. Fifty healthy volunteers (34 male, aged 22+/-2 years) participated in the study. Platelet aggregation and endothelial function were tested before, and 1 hour after, the consumption of 250 mL (1 can) of a sugar-free energy drink. Platelet function was assessed by adenosine diphosphate-induced (1 micromol/L) optical aggregometry in platelet-rich plasma. Endothelial function was assessed via changes in peripheral arterial tonometry and expressed as the reactive hyperemia index (RHI). Compared with baseline values, there was a significant increase in platelet aggregation following energy drink consumption, while no change was observed with control (13.7+/-3.7% vs 0.3+/-0.8% aggregation, respectively, P consumption (-0.33+/-0.13 vs 0.07+/-0.12 RHI [control], P consumption, compared with control (P consumption. Energy drink consumption acutely increases platelet aggregation and decreases endothelial function in healthy young adults. Copyright (c) 2010 Elsevier Inc. All rights reserved.

  20. The world energy production, consumption and productivity in the energy sector, population and the per capita growth: Regression analysis

    OpenAIRE

    Josheski, Dushko; Lazarov, Darko; Koteski, Cane; Sovreski, Zlatko

    2011-01-01

    In this paper was investigated the relationship between GDP per capita growth and Log of energy production, energy consumption per capita, the log of productivity in energy sector and population. Data covered sample for 220 countries and world regions, years covered from 1980 to 2002.The results showed that if energy consumption increases by 1% GDP per capita growth will decline by 0,57%, if energy production will rise by 1% growth will rise by 1,51%, if population rise by 1% growth will decl...

  1. Evaluation and analysis of energy consumption in office buildings; Feldstudie zum Energieverbrauch von Buerogebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    Maas, Stefan; Scholzen, Frank; Thewes, Andreas; Waldmann, Daniele [Universitaet Luxemburg, Campus Kirchberg, Fakultaet fuer Naturwissenschaften, Technologie und Kommunikation, Forschungseinheit Ingenieurswissenschaften, Luxemburg (Luxembourg); Zuerbes, Arno [Fachhochschule Bingen, Fachbereich Technik, Informatik und Wirtschaft, Bingen am Rhein (Germany)

    2011-06-15

    During the last years the national energy consumption of Luxembourg shifted noticeable towards the building sector. In 1990 71 % of the total domestic end energy consumption was ascribed to industrial sector and only 20 % to the building sector. The distribution changed significantly and in 2005 the energy consumption dedicated to industrial sector represented only 44 %, transport 25 % and the tertiary sector 31 % [1], which includes private and public households as well as non-residential buildings. The buildings account for 40 % of total energy consumption in the EU and there is an enormous energy saving potential. Therefore the EUdirective 2002/91/EG [2] requires from all EU Member States to save energy in this sector. Hence the energy saving of buildings present an essential part of climate protection. Furthermore the new directive 2010/31/EG [3] requires from the Member States to tighten national standards and to draw up national plans for increasing the number of nearly zero-energy buildings. But for a better understanding of energy flows in buildings and to develop energy saving concepts as well as to estimate possible energy savings of buildings a detailed analysis of energy consumption databases is an important precondition. The following field survey monitors 47 office buildings in Luxembourg. A separate gathering of electricity, heat and cooling energy consumptions allowed a detailed energetic analysis. A statistical analysis and interpretation of new buildings differentiated by energy sources as well as definition of energy relevant parameters like the window ratio, the construction method, the type of use or the kind of technical installations show the problems of typical existing office buildings. A final extrapolation to the population of all new office buildings in Luxembourg helps to estimate the energy saving potential.

  2. MEAN REVERTING BEHAVIOR OF ENERGY CONSUMPTION: EVIDENCE FROM SELECTED MENA COUNTRIES

    Directory of Open Access Journals (Sweden)

    Suleyman Bolat

    2013-10-01

    Full Text Available This study examines whether the energy consumption for 15 members of the Middle Eastern & North African (MENA countries is a stationary process over 1971-2010 period. Annual energy consumption data for Algeria, Bahrain, Egypt, Iran, Israel, Jordan, Lebanon, Libya, Morocco, Qatar, Saudi Arabia, Syria, Tunisia, United Arab Emirates and Turkey, is analyzed using the Lagrange Multiplier (LM unit root test, in which structural breaks in level and/or trend are endogenously determined. The results of the LM test with two breaks showed that the energy consumption per capita in 8 MENA countries is a stationary process. This study suggests that it is possible to design consistent energy policies based on econometric models and forecasts of energy consumption in those 8 MENA countries.

  3. Development of mechanical ventilation system with low energy consumption for renovation of buildings

    DEFF Research Database (Denmark)

    Terkildsen, Søren

    in reducing CO2-emmissions. Over the last decade, initiatives have been taken to reduce its energy consumption e.g. by the European Union, national governments or NGOs. The initiatives have mostly focused on improving the thermal properties of the building envelope to reduce heat losses. Building services......A general reduction in total energy consumption is needed, due to the increasing concerns about climate change caused by CO2-emmissions from fossil fuels. In 2004, the building sector accounted for 40% of the total energy consumption in the EU and the US and therefore must play a crucial role......, including ventilation, therefore now represent a larger part of the total energy consumption. Mechanical ventilation has been the most widely used principle of ventilation over the last 50 years, but the conventional system design needs revising to meet future energy requirements. The increase in the use...

  4. Impact of water hardness on energy consumption of geyser heating ...

    African Journals Online (AJOL)

    water hardness as a chemical parameter that may impact the power consumption of electrical geyser heating elements. An accelerated scaling .... pictures of the geyser heating elements tested are shown in Fig. 1. Water hardness meters .... The aim of heating cycle and temperature experiments was to show whether scaling ...

  5. Causality between energy consumption and economic growth in India. A note on conflicting results

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Shyamal [Khalisani Mahavidyalaya, Chandannagar-712138, W. B. (India); Bhattacharya, Rabindra N. [Department of Economics, Kalyani University-741235, W. B. (India)

    2004-11-01

    This note examines the different direction of causal relation between energy consumption and economic growth in India. Applying Engle-Granger cointegration approach combined with the standard Granger causality test on Indian data for the period 1950-1996, we find that bi-directional causality exists between energy consumption and economic growth. Further, we apply Johansen multivariate cointegration technique on the different set of variables. The same direction of causality exists between energy consumption and economic growth. This is different from the results obtained in earlier studies.

  6. ANALYSIS OF ENERGY CONSUMPTION IN THE FACILITIES OF THE CIECHANÓW DAIRY COOPERATIVE

    OpenAIRE

    Marek Gugała; Krystyna Zarzecka; Krzysztof Kapela; Anna Sikorska

    2015-01-01

    The work presents the analysis of electric energy consumption in individual buildings of the Ciechanów Dairy Cooperative in 2011. The plant includes a cool storage facility, a boiler house, a compression room and CIP (Cleaning In Place) stations. The plant manufactures liquid milk, cream, cheese, cottage cheese, cream cheese, butter and yoghurts. In 2011, the total electric energy consumption in the Cechanów Dairy Cooperative was 873114.0 kWh. The highest energy consumption (556430.0 kWh0 was...

  7. Energy Consumption and Air-Conditioning Usage in Residential Buildings of Malaysia

    OpenAIRE

    Kubota, Tetsu; Jeong, Sangwoo; Toe, Doris Hooi Chyee; Ossen, Dilshan Remaz

    2011-01-01

    This study provides the detailed information on household energy consumption in residential buildings of Malaysia. A survey was conducted in Johor Bahru in 2009 to analyze electricity consumption due to airconditioning. The results showed that the air-conditioner ownership was 65% and its daily usage time was 6 hours on average. The yearly electricity consumption caused by air-conditioning recorded the largest amount among household appliances. Another survey was carried out in 2004 to reveal...

  8. Energy consumption and temperature correlations for 4 Greek Ionian Sea islands

    Science.gov (United States)

    Psiloglou, B.; Giannakopoulos, C.; Dagoumas, A.; Skourtis, K.

    2012-04-01

    Energy consumption, especially for space heating and cooling, is linked to several weather variables, mainly air temperature. This study investigates the relationship between residential energy consumption load demand and daily mean air temperature for 4 Greek islands in the Ionian Sea for the period 2005-2011.These islands are Zante, Cephallonia, Corfu and Lefkada and were selected due to their data availability as they are interconnected to the mainland power distribution system. We present the time series of diurnal, daily, monthly and yearly variations of energy consumption for each of the selected sites and subsequently identify correlations with mean daily air temperature. Several effects such as weekly and holiday effects, unrelated to weather conditions, can be detected. Daily and monthly seasonal effects have been studied separately to isolate the weather influence on energy consumption. The most important finding, however, is the outstanding increase in consumption during the tourism season. Depending on the island, increased levels of consumption are present for 4,5 or more months per year, related to tourists arrivals on the island. This effect combined with energy consumption peaks on the hot days of the year should be taken into account during energy conservation planning.

  9. Is more always better? The nonlinear relationship between energy consumption and wellbeing

    Science.gov (United States)

    Vaughan Winfrey, Elise Marie

    Policymakers today face rapidly expanding world populations, increasing evidence of environmental degradation and climate change, and mounting economic crises. In this context, they are grappling with the challenge of balancing environmental concerns, economic viability, and the wellbeing of their citizens. Because energy consumption has both positive and negative wellbeing implications, it is unclear whether societal goals to raise standards of living through energy-intensive lifestyles conflict with the social, economic, environmental, and health dimensions of broader wellbeing aspirations. Though there has been a significant amount of research on the long-run environmental consequences of increasing aggregate world energy demand, there is a lack of direct evidence on the relationship between energy consumption and wellbeing. This paper attempts to improve our understanding of the net wellbeing consequences of energy consumption. Specifically, it examines whether there is a nonlinear relationship between per capita energy consumption, as measured alternatively by CO2 emissions (metric tons per capita), electricity consumption (kWh per capita), and total energy consumption (kg of oil equivalent per capita), and wellbeing, as measured by individual life satisfaction aggregated at the country level. Panel and cross-sectional regression analyses are conducted using data from the Gallup World Poll (GWP), integrated European and World Values Surveys (WVS-EVS), and the World Bank DataBank (WBDB). Despite the classic economic assumption that more is always better, this analysis indicates that increasing energy consumption is not always associated with wellbeing improvements. The empirical results provide some suggestive evidence that life satisfaction gains associated with energy consumption may eventually be counterbalanced by the related human and environmental costs. This is valuable information for policymakers trying to balance environmental, energy-security, and

  10. Predictors of changes in adolescents' consumption of fruits, vegetables and energy-dense snacks.

    Science.gov (United States)

    Pearson, Natalie; Ball, Kylie; Crawford, David

    2011-03-01

    Understanding the predictors of developmental changes in adolescent eating behaviours is important for the design of nutrition interventions. The present study examined associations between individual, social and physical environmental factors and changes in adolescent eating behaviours over 2 years. Consumption of fruits, vegetables and energy-dense snacks was assessed using a Web-based survey completed by 1850 adolescents from years 7 and 9 of secondary schools in Victoria, Australia, at baseline and 2 years later. Perceived value of healthy eating, self-efficacy for healthy eating, social modelling and support, and home availability and accessibility of foods were assessed at baseline. Self-efficacy for increasing fruit consumption was positively associated with the change in fruit and vegetable consumption, while self-efficacy for decreasing junk food consumption was inversely associated with the change in energy-dense snack consumption. Home availability of energy-dense foods was inversely associated with the change in fruit consumption and positively associated with the change in energy-dense snack consumption, while home availability of fruits and vegetables was positively associated with the change in vegetable consumption. Perceived value of healthy eating and modelling of healthy eating by mothers were positively associated with the change in fruit consumption. Support of best friends for healthy eating was positively associated with the change in vegetable consumption. Self-efficacy and home availability of foods appear to be consistent predictors of change in fruit, vegetable and energy-dense snack consumption. Future study should assess the effectiveness of methods to increase self-efficacy for healthy eating and to improve home availability of healthy food options in programmes promoting healthy eating among adolescents.

  11. Technical measures to decrease heat energy consumption of final customer in multi-apartment buildings according to Energy Efficiency Directive

    National Research Council Canada - National Science Library

    Romanas Savickas; Lauryna Savickienė; Juozas Bielskus

    2015-01-01

    .... This article presents the analysis how these targets could be achieved by the means of individual heat metering by heat cost allocators for every flat thus decreasing an energy consumption for a final consumer...

  12. Age of first use of energy beverages predicts future maximal consumption among naval pilot and flight officer candidates

    Directory of Open Access Journals (Sweden)

    Thomas E. Sather

    2016-06-01

    Conclusions: A lower age of first energy drink use suggests higher risk of single-occasion heavy episodic consumption in this military population. Researchers should further explore the relationship of early onset energy drink consumption and potential future health risks.

  13. Energy Consumption and Greenhouse Gas Emission Evaluation Scenarios of Mea Fah Luang University

    Directory of Open Access Journals (Sweden)

    Laingoen Onn

    2016-01-01

    Full Text Available In Thailand, quantity of the educational institutes building shared one fourth of commercial building. Among the energy consumption and conservation in the building in Thailand are mostly study in typical office and resident building. Mea Fah Luang University (MFU was selected to represent the educational institutes building where located in the northern part of Thailand. The average temperature in the northern is lower than other parts of Thailand. This study was firstly collected the data about quantity and behaviour of energy consumption in MFU based on the energy audit handbook. Although MFU is located in the northern of Thailand. The highest energy consumption is in the part of air condition. When the energy efficiency appliances and energy conservation building are implemented, the cost of energy will be saved around 15,867,960 Baht. Furthermore, the greenhouse gas emission is also reduced about 72.01 kg CO2, equivalent/m2/year.

  14. Simulation of the Effects of Occupant Behaviour on Indoor Climate and Energy Consumption

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Olesen, Bjarne W.; Toftum, Jørn

    2007-01-01

    In this study the influence of occupant behaviour on energy consumption were investigated in simulations of a single room occupied by one person. The simulated occupant could manipulate six controls, such as turning on or off the heat and adjusting clothing. All control actions were carried out...... indoor environment close to neutral when he/she had the possibility to manipulate the controls. The energy consumption was similar within each behavioural mode regardless of the PMV limits. However, the energy consumption in the energy consuming behavioural mode was up to 330 % higher than in the energy...... with the aim of keeping the PMV value within predefined limits in accordance with CR1752 [1]. An energy consuming and an energy efficient behavioural mode were simulated. A reference simulation was made during which the occupant had no control over the environment. The occupant was able to keep the thermal...

  15. Measurement of inequality using household energy consumption data in rural China

    Science.gov (United States)

    Wu, Shimei; Zheng, Xinye; Wei, Chu

    2017-10-01

    Measuring inequality can be challenging due to the limitations of using household income or expenditure data. Because actual energy consumption can be measured more easily and accurately and is relatively more stable, it may be a better measure of inequality. Here we use data on energy consumption for specific devices from a large nation-wide household survey (n = 3,404 rural households from 12 provinces) to assess inequality in rural China. We find that the overall inequality of energy consumption and expenditure varies greatly in terms of energy type, end-use demand, regions and climatic zones. Biomass, space heating and cooking, intraregional differences, and climatic zones characterized as cold or hot summer/cold winter contribute the most to total inequality for each indicator, respectively. The results suggest that the expansion of infrastructure does not accompany alleviation of energy inequality, and that energy affordability should be improved through income growth and targeted safety-net programmes instead of energy subsidies.

  16. Development of an energy consumption and cost data base for fuel cell total energy systems and conventional building energy systems

    Science.gov (United States)

    Pine, G. D.; Christian, J. E.; Mixon, W. R.; Jackson, W. L.

    1980-07-01

    The procedures and data sources used to develop an energy consumption and system cost data base for use in predicting the market penetration of phosphoric acid fuel cell total energy systems in the nonindustrial building market are described. A computer program was used to simulate the hourly energy requirements of six types of buildings; office buildings; retail stores; hotels and motels; schools; hospitals; and multifamily residences. The simulations were done by using hourly weather tapes for one city in each of the ten Department of Energy administrative regions. Two types of building construction were considered, one for existing buildings and one for new buildings. A fuel cell system combined with electrically driven heat pumps and one combined with a gas boiler and an electrically driven chiller were compared with similar conventional systems. The methods of system simulation, component sizing, and system cost estimation are described for each system.

  17. Energy Consumption and Indoor Environment Predicted by a Combination of Computational Fluid Dynamics and Building Energy Performance Simulation

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    2003-01-01

    An interconnection between a building energy performance simulation program and a Computational Fluid Dynamics program (CFD) for room air distribution is introduced for improvement of the predictions of both the energy consumption and the indoor environment.The article describes a calculation...... of the energy consumption in a large building where the building energy simulation program is modified by CFD predictions of the flow between three zones that are connected by pressure and buoyancy-driven air flow through open areas. The two programs are interconnected in an iterative procedure. The article...... shows also an evaluation of the air quality in the main area of the buildings based on CFD predictions. It is demonstrated that an interconnection between a CFD program and a building energy performance simulation program will improve both the energy consumption data and the prediction of thermal...

  18. The challenge to UK energy policy. An ageing population perspective on energy saving measures and consumption

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, Neveen; Gilroy, Rose [School of Architecture, Planning and Landscape Newcastle University, NE1 7RU (United Kingdom)

    2011-02-15

    With a focus on the residential sector, this paper explores the likelihood of the UK government meeting its energy targets. The paper contends that energy policy needs to take into account the interplay of four major factors: an ageing population of increasing diversity; a cultural inclination for older housing much of which is thermally inefficient; levels of fuel poverty; and the inexorable rise of consumer spending on leisure related services and goods. Decisions made by older households (both the poorer and the better off) may be critical to the success of energy policy. Among the better off the changing expectations of the baby boomers, with their predilection for consumption and travel, may have particular impact. The paper concludes that much of the reduction in carbon footprint made by older people's choices in heating and insulation may be offset, not only by increasing domestic thermal comfort, but also potentially by increasing consumables in the home and other consumer lifestyle choices. What could be achieved at best, may be a shift in energy mix. (author)

  19. Regular energy drink consumption is associated with the risk of health and behavioural problems in adolescents

    NARCIS (Netherlands)

    Holubcikova, Jana; Kolarcik, Peter; Geckova, Andrea Madarasova; Reijneveld, Sijmen A.; van Dijk, Jitse P.

    Consumption of energy drinks has become popular and frequent among adolescents across Europe. Previous research showed that regular consumption of these drinks was associated with several health and behavioural problems. The aim of the present study was to determine the socio-demographic groups at

  20. Interfacial tension between benzene and water in the presence of caprolactam

    NARCIS (Netherlands)

    Tuinier, R.; Krooshof, G.J.P.

    2012-01-01

    We studied the physical properties and the concentration profile of benzene + water + caprolactam mixtures near the fluid–fluid interface using self-consistent field (SCF) theory. This yields the interfacial tension which plays an important role in describing the stability of transient liquid

  1. Impact modification of poly(caprolactam) by copolymerization with a low molecular weight polybutadiene

    NARCIS (Netherlands)

    Borggreve, R.J.M.; Gaymans, R.J.

    1988-01-01

    Caprolactam and a reactive, low molecular weight polybutadiene were polymerized in an autoclave, followed by post-condensation in the solid state. The rubber concentration was varied (0–30 wt%). The morphology of the reaction products was studied by transmission electron microscopy. In the materials

  2. Catalytic conversion of γ-valerolactone to ε-caprolactam: towards nylon from renewable feedstock.

    Science.gov (United States)

    Raoufmoghaddam, Saeed; Rood, Marcus T M; Buijze, Florine K W; Drent, Eite; Bouwman, Elisabeth

    2014-07-01

    The conversion of γ-valerolactone (GVL) in three atom-efficient steps to the important polymer precursor ε-caprolactam is reported. The bio-based GVL can be converted to a mixture of isomeric methyl pentenoates (MP) via trans-esterification with methanol with 94% yield (ratio of 3-MP/4-MP=3:1); subsequent aminolysis with ammonia leads to a mixture of pentenamides (PA) almost quantitatively (99% conversion). The resulting pentenamides are ultimately converted into ε-caprolactam via a rhodium-catalyzed intramolecular hydroamidomethylation reaction, comprising an initial hydroformylation of the alkene moiety of PA and subsequent ring-closing reductive amidation of the resulting aldehyde with the amide functionality. A promising yield of caprolactam of about 90% can be obtained with a Rh/xantphos catalyst system in a two-stage hydroformylation-reductive amidation using pure 4-PA as feedstock. The use of 3-PA as a substrate not only results in a significantly lower regioselectivity for the 7-membered lactam, but also in the formation of high amounts of valeramide (VA). Consequently, a best overall yield of caprolactam of nearly 40% could be demonstrated with a Rh/POP-xantphos [POP-xantphos=4,5-bis(2,8-dimethyl-10-phenoxaphosphino)-9,9,-dimethylxanthene] catalyst system based on the 3:1 mixture of 3-PA/4-PA directly obtainable from GVL. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. The Relationship between Urbanization, Economic Growth and Energy Consumption in China: An Econometric Perspective Analysis

    Directory of Open Access Journals (Sweden)

    Yabo Zhao

    2015-05-01

    Full Text Available As the largest developing country in the world, with rapid economic growth, China has witnessed fast-paced urbanization development over the past three decades. In fact, urbanization has been shown to promote economic growth and improve the livelihood of people, but it can also increase energy consumption and further generate energy crisis. Therefore, a better understanding of the relationship between urbanization, economic growth and energy consumption is important for China’s future sustainable development. This paper empirically investigates the long-term equilibrium relationships, temporal dynamic relationships and causal relationships between urbanization, economic growth and energy consumption in China. Econometric models are utilized taking the period 1980–2012 into consideration. Cointegration tests indicate that the variables are found to be of I(1 and cointegrated. Further, vector error-correction model (VECM indicates that when the short-term fluctuations deviate from the long-term equilibrium, the current changes of energy consumption could eliminate 9.74% non-equilibrium error of the last period, putting back the situation to the equilibrium state through a reverse adjustment. Impulse response analysis intuitively portrays the destabilized changes of the variables in response to some external shocks. However, the impact of energy consumption shock on urbanization and the impact of urbanization on economic growth seem to be rather marginal. Moreover, Granger causality results reveal that there is a bi-directional Granger causal relationship between energy consumption and economic growth, and unidirectional causality running from urbanization to energy consumption and economic growth to urbanization. The findings have important implications for Chinese policymakers that on the path towards a sustainable society, the effects of urbanization and economic growth on energy consumption must be taken into consideration.

  4. Analysis of Spatial Disparities and Driving Factors of Energy Consumption Change in China Based on Spatial Statistics

    OpenAIRE

    Hualin Xie; Guiying Liu; Qu Liu; Peng Wang

    2014-01-01

    The changes of spatial pattern in energy consumption have an impact on global climate change. Based on the spatial autocorrelation analysis and the auto-regression model of spatial statistics, this study has explored the spatial disparities and driving forces in energy consumption changes in China. The results show that the global spatial autocorrelation of energy consumption change in China is significant during the period 1990–2010, and the trend of spatial clustering of energy consumption ...

  5. An Electrical Energy Consumption Monitoring and Forecasting System

    Directory of Open Access Journals (Sweden)

    J. L. Rojas-Renteria

    2016-10-01

    Full Text Available Electricity consumption is currently an issue of great interest for power companies that need an as much as accurate profile for controlling the installed systems but also for designing future expansions and alterations. Detailed monitoring has proved to be valuable for both power companies and consumers. Further, as smart grid technology is bound to result to increasingly flexible rates, an accurate forecast is bound to prove valuable in the future. In this paper, a monitoring and forecasting system is investigated. The monitoring system was installed in an actual building and the recordings were used to design and evaluate the forecasting system, based on an artificial neural network. Results show that the system can provide detailed monitoring and also an accurate forecast for a building’s consumption.

  6. Household energy consumption in the United States, 1987 to 2009: Socioeconomic status, demographic composition, and energy services profiles

    Science.gov (United States)

    Kemp, Robert J.

    This dissertation examines household energy consumption in the United States over the period of 1987 to 2009, specifically focusing on the role of socioeconomic status, demographic composition, and energy services profiles. The dissertation makes use of four cross-sections from the Residential Energy Consumption Survey data series to examine how household characteristics influence annual energy consumption overall, and by fuel type. Chapter 4 shows that household income is positively related to energy consumption, but more so for combustible fuel consumption than for electricity consumption. Additionally, results for educational attainment suggest a less cross-sectional association and more longitudinal importance as related to income. Demographic composition matters, as predicted by the literature; household size and householder age show predicted effects, but when considered together, income explains any interaction between age and household size. Combustible fuels showed a far greater relationship to housing unit size and income, whereas electricity consumption was more strongly related to educational attainment, showing important differences in the associations by fuel type. Taken together, these results suggest a life course-based model for understanding energy consumption that may be strongly linked to lifestyles. Chapter 5 extends the findings in Chapter 4 by examining the patterning of physical characteristics and behaviors within households. The chapter uses Latent Class Analysis to examine a broad set of energy significant behaviors and characteristics to discover five unique energy services profiles. These profiles are uniquely patterned across demographic and socioeconomic compositions of households and have important effects on energy consumption. These profiles are likely byproducts of the lifestyles in which the household takes part, due to factors such as their socioeconomic status and household demographic composition. Overall, the dissertation

  7. Sufficiency does energy consumption become a moral issue?

    Energy Technology Data Exchange (ETDEWEB)

    Muller, Adrian (Socio-economic Inst. and Univ. Research Priority Programme in Ethics, Univ. of Zuerich, Zuerich (Switzerland))

    2009-07-01

    Reducing the externalities from energy use is crucial for sustainability. There are basically four ways to reduce externalities from energy use: increasing technical efficiency ('energy input per unit energy service'), increasing economic efficiency ('internalising external costs'), using 'clean' energy sources with few externalities, or sufficiency ('identifying 'optimal' energy service levels'). A combination of those strategies is most promising for sustainable energy systems. However, the debate on sustainable energy is dominated by efficiency and clean energy strategies, while sufficiency plays a minor role. Efficiency and clean energy face several problems, though. Thus, the current debate should be complemented with a critical discussion of sufficiency. In this paper, I develop a concept of sufficiency, which is adequate for liberal societies. I focus on ethical foundations for sufficiency, as the discussion of such is missing or cursory only in the existing literature. I first show that many examples of sufficiency can be understood as (economic) efficiency, but that the two concepts do not coincide. I then show that sufficiency based on moralization of actions can be understood as implementation of the boundary conditions for social justice that come with notions of liberal societies, in particular the duty not to harm other people. By this, to increase sufficiency becomes a duty beyond individual taste. I further illustrate this in the context of the adverse effects of climate change as externalities from energy use.

  8. Person and consumption profiles. Building integrated energy supply; Person- og forbrugsprofiler. Bygningsintegreret energiforsyning

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Rasmus L.; Noergaard, J.; Daniels, O.; Justesen, R.O.

    2011-08-15

    In the future, buildings will not only act as consumers of energy but as producers as well. For these ''prosumers'', energy production by use of solar panels, photovoltaics and heat pumps etc will be essential. The objective of this project was to find the most optimal combinations of building insulation and use of renewable energy sources in existing buildings in terms of economics and climate impacts. Five houses were analyzed based on different personal load, consumption profiles, solar orientation and proposed building envelope improvements and use of combinations of renewable energy systems. The present report describes how person and consumption profiles used in this project are developed, and which data that form the basis for these profiles. The increasing requirements for energy in the building sector mean that the primary energy consumption ends close to or below zero within the next years. Therefore, the consumption in buildings becomes a relatively larger and larger part of the total energy demand in dwellings. It is important to investigate whether there are seasonal distributions of power and water consumption, because it might give a more exact result and describe the reality better than by using yearly values. First, the personal load determined, and then humidity and consumption of both power and hot water is defined. Second, the hourly profiles are developed based on analyses of seasonal distributions. These profiles also include cold domestic water to see whether there is a correlation between this and hot domestic water. (ln)

  9. A Novel Clustering Model Based on Set Pair Analysis for the Energy Consumption Forecast in China

    Directory of Open Access Journals (Sweden)

    Mingwu Wang

    2014-01-01

    Full Text Available The energy consumption forecast is important for the decision-making of national economic and energy policies. But it is a complex and uncertainty system problem affected by the outer environment and various uncertainty factors. Herein, a novel clustering model based on set pair analysis (SPA was introduced to analyze and predict energy consumption. The annual dynamic relative indicator (DRI of historical energy consumption was adopted to conduct a cluster analysis with Fisher’s optimal partition method. Combined with indicator weights, group centroids of DRIs for influence factors were transferred into aggregating connection numbers in order to interpret uncertainty by identity-discrepancy-contrary (IDC analysis. Moreover, a forecasting model based on similarity to group centroid was discussed to forecast energy consumption of a certain year on the basis of measured values of influence factors. Finally, a case study predicting China’s future energy consumption as well as comparison with the grey method was conducted to confirm the reliability and validity of the model. The results indicate that the method presented here is more feasible and easier to use and can interpret certainty and uncertainty of development speed of energy consumption and influence factors as a whole.

  10. Thermodynamic analysis of the theoretical energy consumption in the removal of organic contaminants by physical methods

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The essential requirements for evaluating the sustainable development of a system and the thermodynamic framework of the energy conservation mechanism in the waste-removal process are proposed.A thermodynamic method of analysis based on the first and second laws of thermodynamics is suggested as a means to analyze the theoretical energy consumption for the removal of organic contaminants by physical methods.Moreover,the theoretical energy consumption for the removal by physical methods of different kinds of representative organic contaminants with different initial concentrations and amounts is investigated at 298.15 K and 1.01325 × 105 Pa.The results show that the waste treatment process has a high energy consumption and that the theoretical energy consumption for the removal of organic contaminants increases with the decrease of their initial concentrations in aqueous solutions.The theoretical energy consumption for the removal of different organic contaminants varies dramatically.Furthermore,the theoretical energy consumption increases greatly with the increase in the amount to be removed.

  11. Survey on Consumption Behaviour of Energy Drink Among University Students: Example of Afyon Kocatepe University

    Directory of Open Access Journals (Sweden)

    Levent Şen

    2015-03-01

    Full Text Available The main objective of this study is to investigate the consumption behaviour and consumption awareness of energy drink among university students. Data were collected from 750 students in Afyon Kocatepe University by questionnaire which is improved by writers of this article. Tests were done with SPSS end of the research. Chi-square tests were done in %95 confidence interval to determine the relation of consumption and awareness of energy drink among the university students with gender, age range, school which is graduated, monthly expense, smoking and use of alcohol, the most consumed beverage types, and degree of licence. According to search results, it was found that energy drink consumption behaviour did not change with regard to the different age. On the other hand, male college graduates compared to other types of high school, it was determined that 701 TL per month and over spenders in relation to the lower income groups consumed more energy drinks . In addition, it was found that the groups that use alcohol, smokers, coffee drinkers and undergraduate students were consumed much more energy drinks than the others. When the answers measured the energy drink consumption behaviour of the students participated in the survey were considered, it was concluded that the awareness of the energy drink consumption was not high enough.

  12. Embodied energy consumption and carbon emissions evaluation for urban industrial structure optimization

    Science.gov (United States)

    Ji, Xi; Chen, Zhanming; Li, Jinkai

    2014-03-01

    Cities are the main material processors associated with industrialization. The development of urban production based on fossil fuels is the major contributor to the rise of greenhouse gas density, and to global warming. The concept of urban industrial structure optimization is considered to be a solution to urban sustainable development and global climate issues. Enforcing energy conservation and reducing carbon emissions are playing key roles in addressing these issues. As such, quantitative accounting and the evaluation of energy consumption and corresponding carbon emissions, which are by-products of urban production, are critical, in order to discover potential opportunities to save energy and to reduce emissions. Conventional evaluation indicators, such as "energy consumption per unit output value" and "emissions per unit output value", are concerned with immediate consumptions and emissions; while the indirect consumptions and emissions that occur throughout the supply chain are ignored. This does not support the optimization of the overall urban industrial system. To present a systematic evaluation framework for cities, this study constructs new evaluation indicators, based on the concepts of "embodied energy" and "embodied carbon emissions", which take both the immediate and indirect effects of energy consumption and emissions into account. Taking Beijing as a case, conventional evaluation indicators are compared with the newly constructed ones. Results show that the energy consumption and emissions of urban industries are represented better by the new indicators than by conventional indicators, and provide useful information for urban industrial structure optimization.

  13. Study on energy consumption evaluation of mountainous highway based on LCA

    Science.gov (United States)

    Fei, Lunlin; Zhang, Qi; Xie, Yongqing

    2017-06-01

    For the system to understand the road construction energy consumption process, this paper selects a typical mountainous highway in the south, using the theory and method of Life Cycle Assessment (LCA) to quantitatively study the energy consumption of the whole process of highway raw materials production, construction and operation. The results show that the energy consumption in the raw material production stage is the highest, followed by the highway operation and construction stage. The energy consumption per unit of tunnel engineering, bridge engineering, roadbed engineering and pavement engineering in the construction phase are 2279.00 tce, 1718.07 tce, 542.19 tce and 34.02 tce, and in operational phase, 85.44% of electricity consumption comes from tunnel ventilation and lighting. Therefore, in the bridge and tunnel construction process, we should promote energy-saving innovation of the construction technology and mechanical equipment, and further strengthen the research and development of tunnel ventilation, lighting energy-saving equipment and intelligent control technology, which will help significantly reduce the energy consumption and greenhouse gas emissions of the life cycle of highway.

  14. Caffeine consumption around an exercise bout: effects on energy expenditure, energy intake, and exercise enjoyment.

    Science.gov (United States)

    Schubert, Matthew M; Hall, Susan; Leveritt, Michael; Grant, Gary; Sabapathy, Surendran; Desbrow, Ben

    2014-10-01

    Combining an exercise and nutritional intervention is arguably the optimal method of creating energy imbalance for weight loss. This study sought to determine whether combining exercise and caffeine supplementation was more effective for promoting acute energy deficits and manipulations to substrate metabolism than exercise alone. Fourteen recreationally active participants (mean ± SD body mass index: 22.7 ± 2.6 kg/m2) completed a resting control trial (CON), a placebo exercise trial (EX), and a caffeine exercise trial (EX+CAF, 2 × 3 mg/kg of caffeine 90 min before and 30 min after exercise) in a randomized, double-blinded design. Trials were 4 h in duration with 1 h of rest, 1 h of cycling at ∼65% power at maximum O2 consumption or rest, and a 2-h recovery. Gas exchange, appetite perceptions, and blood samples were obtained periodically. Two hours after exercise, participants were offered an ad libitum test meal where energy and macronutrient intake were recorded. EX+CAF resulted in significantly greater energy expenditure and fat oxidation compared with EX (+250 kJ; +10.4 g) and CON (+3,126 kJ; +29.7 g) (P intake compared with CON (-718 kJ; -8 g) (P = 0.055) was observed. Consequently, EX+CAF created a greater energy deficit (P Caffeine also led to exercise being perceived as less difficult and more enjoyable (P caffeine with exercise creates a greater acute energy deficit, and the implications of this protocol for weight loss or maintenance over longer periods of time in overweight/obese populations should be further investigated. Copyright © 2014 the American Physiological Society.

  15. House Owners’ Interests and Actions in Relation to Indoor Temperature, Air Quality and Energy Consumption

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Andersen, Rune K.; Hansen, Anders Rhiger

    2016-01-01

    in saving energy for the sake of the environment and for their own economy, and quite a lot of households indicate that they know their own energy consumption, though only few follow it closely. Thus being concerned about energy is not necessarily related to an interest in detailed feedback on one’s own...

  16. Evaluation on Thermal Environment and Energy Consumption of a Demonstration Building in Ningqiang

    Science.gov (United States)

    Wang, Chen; Ma, Jinghui

    2017-08-01

    The aim of this paper is to clarify the thermal performance and environment of a demonstration building in Ningqiang, China, utilizing building indoor temperature and energy consumption simulation program EnergyPlus. Compared with the existing building model, the energy saving rate of the demonstration building model is 42.42%, 6.92% higher than that of benchmark model, based on simulation analyses.

  17. Denton, Texas: Using Transportation Data to Reduce Fuel Consumption (City Energy: From Data to Decisions)

    Energy Technology Data Exchange (ETDEWEB)

    Office of Strategic Programs, Strategic Priorities and Impact Analysis Team

    2017-09-29

    This fact sheet "Denton, Texas: Using Transportation Data to Reduce Fuel Consumption" explains how the City of Denton used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

  18. An investigation into the heat consumption in a low-energy building

    Energy Technology Data Exchange (ETDEWEB)

    Wojdyga, K. [The Warsaw University of Technology, 20 Nowowiejska St., 02668 Warsaw (Poland)

    2009-12-15

    The results of five-year study of the heat consumption in a single-storey terraced low-energy residence are presented. The house is part of a forty building Warsaw housing estate Wilanow-Zawady. (author)

  19. The causal link among militarization, economic growth, CO2 emission, and energy consumption.

    Science.gov (United States)

    Bildirici, Melike E

    2017-02-01

    This paper examines the long-run and the causal relationship among CO2 emissions, militarization, economic growth, and energy consumption for USA for the period 1960-2013. Using the bound test approach to cointegration, a short-run as well as a long-run relationship among the variables with a positive and a statistically significant relationship between CO2 emissions and militarization was found. To determine the causal link, MWALD and Rao's F tests were applied. According to Rao's F tests, the evidence of a unidirectional causality running from militarization to CO2 emissions, from energy consumption to CO2 emissions, and from militarization to energy consumption all without a feedback was found. Further, the results determined that 26% of the forecast-error variance of CO2 emissions was explained by the forecast error variance of militarization and 60% by energy consumption.

  20. New Building Principles In Consequence Of Legislative Demands For Reduced Energy Consumption In Danish Housing

    DEFF Research Database (Denmark)

    Jessen, Rasmus Zederkof; Brohus, Henrik; Kirkegaard, Poul Henning

    2006-01-01

    The increasing restrictions in coming building codes regarding energy consumption in housing generate a need to rethink the building design as well as the building process. This paper discusses the need to change/challenge the way structures are conceived in order to accommodate new legislative...... demands regarding energy consumption. More often than not sustainable aspects like the need for reduced energy consumption are implemented late in the design process. This paper investigates the affect of incorporating aspects like solar heat gain and energy consumption in the initial concept....... With the right approach and tools, integrating sustainable thinking could/should produce new architectural layouts as well as new ways of designing houses. The emphasis of this paper is on the latter and will consider the implications that the challenging new demands have on contemporary architecture...

  1. Energy efficiency in buildings. Trends in energy consumption and building technique; Energieffektivitet i bygninger. Trender i energibruk og byggeteknikk

    Energy Technology Data Exchange (ETDEWEB)

    Blom, Peter; Pettersen, Trine Dyrstad

    1999-08-01

    According to this report, Norway must now import electric power every second or third year, which implies a new trend in the Norwegian energy supply. The increase of the energy consumption in buildings are essentially due to increased heated area. Heating systems based on water heated by new renewable energy sources are very slow to emerge; the number of projects per year are too few to have any impact on the increasing electricity consumption. The report points out a series of technical possibilities for increased energy efficiency. It also focuses on necessary measures within research, technology development and planning. 18 refs., 18 figs., 10 tabs.

  2. Regional energy consumption and income differences in Denmark

    DEFF Research Database (Denmark)

    Klinge Jacobsen, Henrik

    2003-01-01

    Internationally a debate on the distributional impact of energy taxation has focused on the tax burden relative to income. The general conclusion is that taxes are regressive, but at a varying degree for different countries. This study examines the relationship between location, income, heating...... documents that rural populations have higher energy bills also compared to income, but there is no income inequality between rural and urban areas in Denmark. In countries with higher inequality in income distribution and a higher proportion of low-income households in rural areas, the impact of energy...... technology characteristics and the energy tax that households pay. The article aims at identifying general implications of energy taxes with respect to different impacts on population groups depending on location and income. Tax payments associated with energy use are considered relative to total disposable...

  3. Technology change and energy consumption: A comparison of residential subdivisions

    Science.gov (United States)

    Nieves, L. A.; Nieves, A. L.

    The energy savings in residential buildings likely to result from implementation of the building energy performance standards (BEPS) were assessed. The goals were to: compare energy use in new homes designed to meet or exceed BEPS levels of energy efficiency with that in similar but older homes designed to meet conventional building codes, and to survey the home owners regarding their energy conservation attitudes and behaviors and to ascertain the degree to which conservation attitudes and behaviors are related to residential energy use. The consumer demand theory which provides the framework for the empirical analysis is presented. The sample residences are described and the data collection method discussed. The definition and measurement of major variables are presented.

  4. Optimization for municipal solid waste treatment based on energy consumption and contaminant emission.

    Science.gov (United States)

    Jiao, An-Ying; Li, Zhen-Shan; Wang, Lei; Xia, Meng-Jing

    2013-09-01

    This paper analyzes the characterization of energy consumption and contaminant emissions from a municipal solid waste (MSW) treatment system that comprises transfer station, landfill site, combustion plant, composting plant, dejecta treatment station, and an integrated MSW treatment plant. The consumed energy and energy medium materials were integrated under comprehensive energy consumption (CEC) for comparison. Among typical MSW disposal methods such as combustion, composting, and landfilling, landfilling has the minimum CEC value. Installing an integrated treatment plant is the recommended MSW management method because of its lower CEC. Furthermore, this method is used to ensure process centralization. In landfill sites, a positive linear correlation was observed between the CEC and contaminant removal ratios when emitted pollutants have a certain weight coefficient. The process should utilize the minimum CEC value of 5.3702 kgce/t MSW and consider energy consumption, energy recovery, MSW components, and the equivalent of carbon dioxide emissions.

  5. Forecasting of Chinese Primary Energy Consumption in 2021 with GRU Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Bingchun Liu

    2017-09-01

    Full Text Available The forecasting of energy consumption in China is a key requirement for achieving national energy security and energy planning. In this study, multi-variable linear regression (MLR and support vector regression (SVR were utilized with a gated recurrent unit (GRU artificial neural network of Chinese energy to establish a forecasting model. The derived model was validated through four economic variables; the gross domestic product (GDP, population, imports, and exports. The performance of various forecasting models was assessed via MAPE and RMSE, and three scenarios were configured based on different sources of variable data. In predicting Chinese energy consumption from 2015 to 2021, results from the established GRU model of the highest predictive accuracy showed that Chinese energy consumption would be likely to fluctuate from 2954.04 Mtoe to 5618.67 Mtoe in 2021.

  6. BOLIVIA’S ENERGY CONSUMPTION AND ECONOMIC GROWTH PROFILE: IS THERE A LINK?

    Directory of Open Access Journals (Sweden)

    Ismail SOILE

    2016-01-01

    Full Text Available The fundamental importance of energy for socio-economic existence cannot be over-emphasized. With an annual average growth rate of 3.6% over the period of 1998 and 2008, the Bolivian economic statistics shows that over 60% of the country’s GDP growth rate can be attributed to its export sector. However, energy consumption also grew significantly over the same period. Thus we seek to establish the directional causality between energy consumption and economic growth in Bolivia using secondary annual data for the period of 1971 to 2010. The Granger-causality tests indicate that there is an unidirectional causality that runs from economic growth to energy consumption with no feedback. The study, therefore, recommends that policies meant to manage growing energy demand can be instituted without obstructing growth in Bolivia. Energy taxation and pricing reform can help raise additional revenue for development.

  7. Energy Consumption and Economic Growth in Algeria: Cointegration and Causality Analysis

    Directory of Open Access Journals (Sweden)

    Cherfi Souhila

    2012-01-01

    Full Text Available This study investigates the energy consumption-growth nexus in Algeria. The causal relationship between the logarithm of per capita energy consumption (LPCEC and the logarithm of per capita GDP (LPCGDP during the 1965-2008 period is examined using the threshold cointegration and Granger causality tests. The estimation results indicate that the LPCEC and LPCGDP for Algeria are non cointegrated and that there is a uni-directional causality running from LPCGDP to LPCEC, but not vice versa. The research results strongly support the neoclassical perspective that energy consumption is not a limiting factor to economic growth in Algeria. Accordingly, an important policy implication resulting from this analysis is that government can pursue the conservation energy policies that aim at curtailing energy use for environmental friendly development purposes without creating severe effects on economic growth. The energy should be efficiently allocated into more productive sectors of the economy.

  8. Reducing Display Bottle Cooler Energy Consumption Using PCM As Active Thermal Storage

    OpenAIRE

    Beek, Marcel van; de Jong, Hans

    2014-01-01

    The final results of an analytical and experimental study in reducing the energy consumption of a display bottle cooler using Phase Change Material (PCM) as an active thermal storage are presented. The objective of the study was to design and built a 350 dm3 glass door bottle cooler having an appliance energy consumption reduction of over 75% compared to state of the art bottle coolers (2010 figures). Calculation results show that active thermal storage using PCM can be effectively applied to...

  9. Spatial Planning as a driver of change in mobility and residential energy consumption

    OpenAIRE

    Dujardin, Sébastien; Marique, Anne-Françoise; Teller, Jacques

    2014-01-01

    This paper analyses the impact of territorial structures upon energy consumption in the Walloon Region (Belgium). The rationale for this research is to consider the long-term influence of spatial planning decisions upon energy consumption in both residential building stock and home-to-work commuting. The analysis has been conducted on a regional scale (16,844 km2) and includes urban, peri-urban and rural settlements. Those settlements that perform well in mobility also appear to perform well ...

  10. Energy Consumption and Saving Analysis for Laser Engineered Net Shaping of Metal Powders

    Directory of Open Access Journals (Sweden)

    Zhichao Liu

    2016-09-01

    Full Text Available With the increasing awareness of environmental protection and sustainable manufacturing, the environmental impact of laser additive manufacturing (LAM technology has been attracting more and more attention. Aiming to quantitatively analyze the energy consumption and extract possible ways to save energy during the LAM process, this investigation studies the effects of input variables including laser power, scanning speed, and powder feed rate on the overall energy consumption during the laser deposition processes. Considering microhardness as a standard quality, the energy consumption of unit deposition volume (ECUDV, in J/mm3 is proposed as a measure for the average applied energy of the fabricated metal part. The potential energy-saving benefits of the ultrasonic vibration–assisted laser engineering net shaping (LENS process are also examined in this paper. The experimental results suggest that the theoretical and actual values of the energy consumption present different trends along with the same input variables. It is possible to reduce the energy consumption and, at the same time, maintain a good part quality and the optimal combination of the parameters referring to Inconel 718 as a material is laser power of 300 W, scanning speed of 8.47 mm/s and powder feed rate of 4 rpm. When the geometry shaping and microhardness are selected as evaluating criterions, American Iron and Steel Institute (AISI 4140 powder will cause the largest energy consumption per unit volume. The ultrasonic vibration–assisted LENS process cannot only improve the clad quality, but can also decrease the energy consumption to a considerable extent.

  11. Water and energy consumption of Populus spp. bioenergy systems: A case study in Southern Europe

    Energy Technology Data Exchange (ETDEWEB)

    Sevigne, Eva [SosteniPrA (UAB-IRTA), Institut de Ciencia i Tecnologia Ambientals (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Gasol, Carles M. [SosteniPrA (UAB-IRTA), Institut de Ciencia i Tecnologia Ambientals (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Inedit Innovacio S.L. Parc de Recerca de la Universitat Autonoma de Barcelona (UAB), Carretera de Cabrils Km2, 08348 Barcelona (Spain); Brun, Filippo [Dipartimento di Economia e Ingegneria Agraria Forestale e Ambientale, University of Torino (Italy); Rovira, Laura; Pages, Josep Maria; Camps, Francesc [IRTA-Mas Badia, Institut de Recerca i Tecnologia Agroalimentaria (IRTA), Estacion Experimental Fundacion Mas Badia Ctra, De la Tallada, s/n, 17134 La Tallada, Girona (Spain); Rieradevall, Joan; Gabarrell, Xavier [SosteniPrA (UAB-IRTA), Institut de Ciencia i Tecnologia Ambientals (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Chemical Engineering Department, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain)

    2011-02-15

    With the objectives of climate change mitigation and energy independence, energy crops have been proposed as an alternative to fossil fuels. In recent years short rotation energy crops have been promoted because they provide biomass in short periods of time. However, the impacts of water consumption, in both the impact on the energy balance due to the consumption of irrigation as the impacts on existing water resources, have not been analyzed in depth. This study evaluates the relationship between water, energy and CO{sub 2} emissions of a plot of Populus spp. in Spain with the aim of evaluating the feasibility of its implementation as large-scale cultivation. For the energy and environmental assessment it has been used the life cycle analysis methodology. The results show positive energy balance and environmental improvement respect other energies such as natural gas. Consumption of water required to avoid a kg of CO{sub 2} is 4.6 m{sup 3} and per unit of energy obtained is 45 m{sup 3} GJ{sup -1} considering a life cycle approach and in relation to the water availability of the basin could increase the pressure. Hence, in order to establish energy crops for climate change mitigation water consumption associated must be taken into account for future energy planning. (author)

  12. Analysis and modelling of the energy consumption of chemical batch plants

    Energy Technology Data Exchange (ETDEWEB)

    Bieler, P.S.

    2004-07-01

    This report for the Swiss Federal Office of Energy (SFOE) describes two different approaches for the energy analysis and modelling of chemical batch plants. A top-down model consisting of a linear equation based on the specific energy consumption per ton of production output and the base consumption of the plant is postulated. The model is shown to be applicable to single and multi-product batches for batch plants with constant production mix and multi-purpose batch plants in which only similar chemicals are produced. For multipurpose batch plants with highly varying production processes and changing production mix, the top-down model produced inaccurate results. A bottom-up model is postulated for such plants. The results obtained are discussed that show that the electricity consumption for infrastructure equipment was significant and responsible for about 50% of total electricity consumption. The specific energy consumption for the different buildings was related to the degree of automation and the production processes. Analyses of the results of modelling are presented. More detailed analyses of the energy consumption of this apparatus group show that about 30 to 40% of steam energy is lost and thus a large potential for optimisation exists. Various potentials for making savings, ranging from elimination of reflux conditions to the development of a new heating/cooling-system for a generic batch reactor, are identified.

  13. Power consumption of lifts and potential for energy savings; Elektrizitaetsverbrauch und Einspar-Potenziale bei Aufzuegen

    Energy Technology Data Exchange (ETDEWEB)

    Nipkow, J.

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) reviews the results of a study made on the electricity consumption of lifts, which estimates that around 0.5% of Swiss power consumption is caused by lift installations. The results of measurements made on 33 various lift installations and their power consumption are presented. The SIA 380/4 model used to determine energy consumption on the basis of the number of movements is described. Stand-by and lighting consumption is examined, which, according to the authors' conclusions, offer considerable room for improvement, especially for lifts in residential buildings. A further significant potential for improvement is also noted which can be achieved when renewing older systems. The avoidance of inefficient concepts by the use of guidelines for architects, planners and customers is recommended.

  14. Energy Consumption and Freight Transport Demand in Denmark

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Bonilla, David

    2008-01-01

    Considering the externalities of freight transport activity (energy use, accidents, congestion, its related GHG emissions, and lost oil revenues) this article reviews trends from 1990-2005 in truck freight fuel intensity (energy use per tonne-km moved), on road truck fuel economy (L/ 100 km drive...

  15. Performance gaps in energy consumption : household groups and building characteristics

    NARCIS (Netherlands)

    van den Brom, P.I.; Meijer, A.; Visscher, H.J.

    2017-01-01

    The difference between actual and calculated energy is called the ‘energy-performance gap’. Possible explanations for this gap are construction mistakes, improper adjusting of equipment, excessive simplification in simulation models and occupant behaviour. Many researchers and governmental

  16. European approaches to changing patterns of energy consumption and supply

    Energy Technology Data Exchange (ETDEWEB)

    Lepetit, P. [Centre Francais sur les Etats-Unis, 75 - Paris (France)

    2001-07-01

    In the case of the broad debate on the security of energy supply, launched by the european commission on november 2000, this document presents the historical european facts and figures, stress the dramatic changes since 1990 and discussed the policy opinions (nuclear energy, tax policy, further progress in opening market and promoting international trade and investment). (A.L.B.)

  17. Consumption of energy drinks, alcohol, and alcohol-mixed energy drinks among Italian adolescents.

    Science.gov (United States)

    Flotta, Domenico; Micò, Rocco; Nobile, Carmelo G A; Pileggi, Claudia; Bianco, Aida; Pavia, Maria

    2014-06-01

    It has been argued that the excessive consumption of energy drinks (EDs) may have serious health consequences, and that may serve as an indicator for substance use and other risky behaviors. The present paper offers a perspective on this topic that remains underexplored on the population of adolescents. Data were collected via self-administered anonymous questionnaires from 870 adolescents aged 15 to 19 years who were recruited from a random sample of public secondary schools in the geographic area of the Calabria Region, in the South of Italy. A total of 616 participants completed the survey for a response rate of 70.8%. Nearly 68% of respondents had drunk at least a whole can of ED during their life, and about 55% reported consuming EDs during the 30 days before the survey. Only 13% of interviewed adolescents were aware that drinking EDs is the same as drinking coffee, whereas a sizable percentage believed that drinking EDs is the same as drinking carbonated beverages or rehydrating sport drinks. Forty-six percent of adolescents had drunk alcohol-mixed energy drinks (AmEDs) during their life, and 63% of lifetime users admitted drinking AmEDs during the 30 days before the survey. Overall, 210 (63.3%) had drunk alcohol alone not mixed with EDs during their life, and more than half (56.3%) reported having consumed it at least once during the 30 days before the survey. Multivariate analysis showed that the factors independently associated with the consumption of AmEDs were the increasing number of sexual partners, being a current smoker, being male, riding with a driver who had been drinking alcohol, and having used marijuana. Comprehensive educational programs among youths focusing on potential health effects of EDs, alcohol, and the combination of the two, designed to empower the ability to manage these drinking habits, are strongly advisable. Copyright © 2014 by the Research Society on Alcoholism.

  18. Occupant performance and building energy consumption with different philosophies of determining acceptable thermal conditions

    DEFF Research Database (Denmark)

    Toftum, Jørn; Andersen, Rune Vinther; Jensen, Kasper Lynge

    2009-01-01

    configurations, especially in the tropical climate, the estimated performance differed only modestly between configurations. However, energy consumption was always lower in buildings without mechanical cooling, particularly so in the tropical climate. The findings indicate that determining acceptable indoor......Based on building energy and indoor environment simulations, this study uses a recently developed method relying on Bayesian Network theory to estimate and compare the consequences for occupant performance and energy consumption of applying temperature criteria set according to the adaptive model...... thermal environments with the adaptive comfort model may result in significant energy savings and at the same time will not have large consequences for the mental performance of occupants....

  19. A Household-based analysis of domestic energy consumption for lighting in Jaipur City

    Directory of Open Access Journals (Sweden)

    Nand Kumar

    2016-05-01

    Full Text Available India being the third largest economy of the world, more than two third of the total population lives in villages and started to consuming more quantity of energy in the recent years. Though the electricity consumption in the domestic sector has increased up to 22 per cent of the total electricity consumption, electricity consumption in villages is very less, since good number of villages in the rural system are not even electrified. In urban areas almost 90 percent of the household use electricity for lighting and just 10 percent use kerosene for the said purpose, whereas in the rural areas still more number of households use kerosene for lighting purposes. In this paper an attempt is made to analyze the domestic energy consumption for lighting in Jaipur city. Good amount of literature collected pertaining to domestic energy consumption for lighting purposes across the globe, analyzed thoroughly and presented. Further, a household survey was conducted among 684 households in Jaipur city by employing pre-tested schedule. The schedule has few variables including identification particulars, economic conditions, demographic pattern, domestic lighting appliances at the household level; and the energy consumption pattern. Further the collected data are analyzed and a multiple regression model was developed by considering the total electricity consumption as dependent variable ‘Y’ and the electrical appliances for lighting purposes, such as the number of incandescent bulbs, tube lights, CFL, and LED are considered as ‘X’ variables; and this study conclude with plausible findings and recommendations.

  20. Associations between energy drink consumption and alcohol use behaviors among college students.

    Science.gov (United States)

    Velazquez, Cayley E; Poulos, Natalie S; Latimer, Lara A; Pasch, Keryn E

    2012-06-01

    To explore associations between energy drink consumption and alcohol use among college students. Participants included 585 students (m age=18.7; 47.0% White, 21% Hispanic, 25% Asian, 7% other race/ethnicity; 56.0% female). Energy drink behaviors included past month and past week consumption. Alcohol use behaviors included past month and past two week consumption, as well as heavy drinking and quantity of alcohol consumed. Consumption of energy drinks mixed with alcohol was also measured. Linear and logistic regression analyses between energy drink consumption and alcohol use were run controlling for gender, age, and race/ethnicity. For each one unit increase in past month (i.e., additional day used) energy drink use, the likelihood of past month alcohol use increased by 80%, heavy drinking by 80% and past month energy drinks mixed with alcohol use by 90%. Similar results were found for past week energy drink use. A positive relationship between energy drink use and quantity of alcohol consumed during a single episode of drinking was also found (pconsumption and alcohol use as well as quantity of alcohol consumed were found, with relationships stronger among males than females. There were no significant interactions by race/ethnicity. Energy drinks are readily available to students and pose potential health risks. Students who report greater energy drink consumption also consume more alcohol, are more likely to mix energy drinks and alcohol, and experience heavy episodes of drinking, which is problematic given the potential negative consequences of these drinks. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  1. Model of price-dependent management of an industrial enterprise energy consumption

    Directory of Open Access Journals (Sweden)

    Solovieva I.A.

    2017-01-01

    Full Text Available The article is devoted to the problems of price-dependent management of energy consumed by industrial enterprises which are involved in purchasing energy in the wholesale and retail energy markets. The article provides the analysis of forming the obligation value to pay for each component of cost of energy. There have been revealed ways and time intervals of energy consumption demand value management in order to minimize the obligation value to pay for cost of energy. The authors have developed a model aimed at managing energy consumption demand which takes into consideration the specific character of forming the obligation to pay in terms of each component of cost bearing in mind to the factors restricting possibilities to manage demand in the time intervals required. The article also covers some description of the parameters developed for information support of the model offered. The practical approval conducted by the authors, permits to state that using the mechanism of price-dependent energy consumption gives industrial enterprises substantial reserves to reduce energy consumption costs. The research results are of practical importance and can be applied in everyday activity connected with energy purchasing by industrial enterprises.

  2. Consumption of Energy Drinks among Undergraduate Students in Taiwan: Related Factors and Associations with Substance Use

    Directory of Open Access Journals (Sweden)

    Yen-Jung Chang

    2017-08-01

    Full Text Available Background: This study aimed to investigate the consumption of energy drinks and associated factors among undergraduate students in Taiwan. Methods: Data came from a cross-sectional survey conducted in 2015. Eligible participants completed a self-administered questionnaire assessing use and perceptions of energy drinks, tobacco, alcohol, and betel nut. Results: Among 606 surveyed undergraduate students, 24.8% reported consuming energy drinks in the past 30 days. The major reasons for use included keeping alert at work (48.7%, being curious about the products (32.0%, enjoying the flavor (31.3%, or preparing for school exams (26.7%. Among energy drink users, half have never read the nutrition label, and 15.3% reported that they had ever mixed energy drinks with alcohol. Most participants showed negative attitudes toward using tobacco, alcohol, or betel nut, while 54.1% reported positive attitudes toward consuming energy drinks. Being male, living away from parents’ home, tobacco use, alcohol use, and positive perceptions of energy drink’s effects significantly predicted energy drink consumption. Conclusions: In addition to exploring motivations of energy drink consumption in undergraduate students in Taiwan, the study findings indicated that energy drink consumption might relate to the use of tobacco and alcohol, which should be taken into account in substance use prevention programs.

  3. Consumption of Energy Drinks among Undergraduate Students in Taiwan: Related Factors and Associations with Substance Use.

    Science.gov (United States)

    Chang, Yen-Jung; Peng, Ching-Yi; Lan, Yu-Ching

    2017-08-24

    Background : This study aimed to investigate the consumption of energy drinks and associated factors among undergraduate students in Taiwan. Methods : Data came from a cross-sectional survey conducted in 2015. Eligible participants completed a self-administered questionnaire assessing use and perceptions of energy drinks, tobacco, alcohol, and betel nut. Results : Among 606 surveyed undergraduate students, 24.8% reported consuming energy drinks in the past 30 days. The major reasons for use included keeping alert at work (48.7%), being curious about the products (32.0%), enjoying the flavor (31.3%), or preparing for school exams (26.7%). Among energy drink users, half have never read the nutrition label, and 15.3% reported that they had ever mixed energy drinks with alcohol. Most participants showed negative attitudes toward using tobacco, alcohol, or betel nut, while 54.1% reported positive attitudes toward consuming energy drinks. Being male, living away from parents' home, tobacco use, alcohol use, and positive perceptions of energy drink's effects significantly predicted energy drink consumption. Conclusions : In addition to exploring motivations of energy drink consumption in undergraduate students in Taiwan, the study findings indicated that energy drink consumption might relate to the use of tobacco and alcohol, which should be taken into account in substance use prevention programs.

  4. Methodological Approach to Determining the Effect of Parallel Energy Consumption on District Heating System

    Science.gov (United States)

    Latosov, Eduard; Volkova, Anna; Siirde, Andres; Kurnitski, Jarek; Thalfeldt, Martin

    2017-05-01

    District heating (DH) offers the most effective way to enhance the efficiency of primary energy use, increasing the share of renewable energy in energy consumption and decreasing the amount of CO2 emissions. According to Article 9 section 1 of the Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings, the Member states of the European Union are obligated to draw up National Plans for increasing the number of nearly zero-energy buildings [1]. Article 2 section 2 of the same Directive states that the energy used in nearly zero-energy buildings should be created covered to a very significant extent by energy from renewable sources, including energy from renewable sources produced on-site or nearby. Thus, the heat distributed by DH systems and produced by manufacturing devices located in close vicinity of the building also have to be taken into account in determining the energy consumption of the building and the share of renewable energy used in the nearly zero-energy buildings. With regard to the spreading of nearly zero-energy and zero-energy houses, the feasibility of on-site energy (heat and/or electricity) production and consumption in DH areas energy (i.e. parallel consumption, when the consumer, connected to DH system, consumes energy for heat production from other sources besides the DH system as well) needs to be examined. In order to do that, it is necessary to implement a versatile methodological approach based on the principles discussed in this article.

  5. The impacts of climate change on energy consumption in buildings research in progress

    Energy Technology Data Exchange (ETDEWEB)

    Sheppard, R.; de Dear, R.J. [Macquarie Univ., North Ryde, NSW (Australia); Rowe, D. [Sydney Univ., NSW (Australia); McAvaney, B. [Australian Bureau of Meteorology Research Centre, Melbourne, VIC (Australia)

    1996-10-01

    The commercial sector in Australia uses approximately 54 percent of its available energy for heating and cooling purposes. The main reason for this extensive use of energy is, simply, the climate. Current research into climate change suggests the importance of reducing the energy consumption of these processes as an aid to reducing accumulation of carbon dioxide in the atmosphere. As a first step towards an understanding of its influence, this study investigates the effect of possible climate change on the energy consumption of an HVAC system in a typical Sydney office building. Hourly weather files have been extracted from a general circulation model and are applied in a building simulation model to predict variations in energy consumption. (author). 8 figs., 11 refs.

  6. Study on the China regional economic growth and energy consumption intensity difference convergence

    Science.gov (United States)

    Shang, Mei; Wu, Lu

    2017-04-01

    Based on theory of convergence, firstly, per-capita GDP difference convergence model of underdeveloped regions and developing regions compared with developed regions are established, then, convergence model of energy consumption intensity difference compared with per-capita GDP difference is built, from which, it is found that China's regional per-capita GDP growth shows convergence trend, and convergence rate of energy consumption intensity is slightly slower than the per-capita GDP. So, it is suggested that the local government should fully consider the convergence characteristics of regional energy consumption difference to guarantee not only economic growth but also energy saving and emission reduction in order to ensure sustained economic growth in the implementation of energy-saving emission reduction strategies.

  7. Energy consumption in office buildings. Trends and drivers; Energibruk i kontorbygg. Trender og drivere

    Energy Technology Data Exchange (ETDEWEB)

    Langseth, Benedicte

    2013-02-01

    This report focuses on the energy usage of Norwegian office buildings. Historic data on the subject is limited, so qualitative input is gathered through interviews with property owners and contractors for energy solutions. We have looked at what affects the total area of office buildings in Norway, and realized that it more or less follows the inland gross domestic product. The report also includes cross-sectional analyses from various data sources to find what affects the specific energy usage of office buildings. The actual measured consumption deviates from estimated consumption, especially in newer buildings and especially within ventilation and cooling. Additionally, a model has been developed for projective purposes. It is well suited to test the effect of various input parameters and assumptions on the total area of office buildings and their energy consumption. Though as of yet the quality of data is not good enough to make a profound and credible estimate of total energy usage.(eb)

  8. OIL MARKET, NUCLEAR ENERGY CONSUMPTION AND ECONOMIC GROWTH: EVIDENCE FROM EMERGING ECONOMIES

    Directory of Open Access Journals (Sweden)

    Hanan Naser

    2014-04-01

    Full Text Available This paper empirically examines the relationship between oil consumption, nuclear energy consumption, oil price and economic growth in four emerging economies (Russia, China, South Korea, and India over the period from 1965 to 2010. Applying a modified version of the granger causality test developed by Toda and Yamamoto, we find that the level of world crude oil prices (WTI plays a crucial role in determining the economic growth in the investigated countries. The results suggest that there is a unidirectional causality running from real GDP to oil consumption in China and South Korea, while bidirectional relationship between oil consumption and real GDP growth appears in India. Furthermore, the results propose that while nuclear energy stimulates economic growth in both South Korea and India, the rapid increase in China economic growth requires additional usage of nuclear energy.

  9. Estimating Total Energy Consumption and Emissions of China's Commercial and Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Fridley, David; Fridley, David G.; Zheng, Nina; Zhou, Nan

    2008-03-01

    Buildings represent an increasingly important component of China's total energy consumption mix. However, accurately assessing the total volume of energy consumed in buildings is difficult owing to deficiencies in China's statistical collection system and a lack of national surveys. Official statistics suggest that buildings account for about 19% of China's total energy consumption, while others estimate the proportion at 23%, rising to 30% over the next few years. In addition to operational energy, buildings embody the energy used in the in the mining, extraction, harvesting, processing, manufacturing and transport of building materials as well as the energy used in the construction and decommissioning of buildings. This embodied energy, along with a building's operational energy, constitutes the building's life-cycle energy and emissions footprint. This report first provides a review of international studies on commercial building life-cycle energy use from which data are derived to develop an assessment of Chinese commercial building life-cycle energy use, then examines in detail two cases for the development of office building operational energy consumption to 2020. Finally, the energy and emissions implications of the two cases are presented.

  10. Survey of the actual energy consumption in the commercial/residential sector; Minsei bumon energy shohi jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A questionnaire survey was conducted of the actual energy consumption in the business sector (schools, hotels/inns, hospitals, and other service business) in fiscal 1996, and was put together with the survey conducted in the past in order to clarify the structure and trend of energy consumption in the commercial/residential sector. The survey was aimed at making basic data for the development/introduction of the petroleum substituting energy including future new energy. The consumption unit requirement of a school total was 84.9 Mcal/m{sup 2} per year, that of a hotel/inn total was 455.3 Mcal/m{sup 2} per year, and that of a hospital total was 400.2 Mcal/m{sup 2} per year. The energy consumption for business use was summarized. The consumption unit requirement of restaurants was the largest, 622.8 Mcal/m{sup 2} per year, and that of schools was the smallest. In office building business and wholesale/retailing business, electricity is largely used mostly for illumination, power, etc. In restaurants, gas is largely used mostly for its own use including cooking. In schools, energy use for space heating was the largest, but was almost the same as that in office buildings in terms of the amount. 179 figs., 31 tabs.

  11. Increased alcohol consumption, nonmedical prescription drug use, and illicit drug use are associated with energy drink consumption among college students.

    Science.gov (United States)

    Arria, Amelia M; Caldeira, Kimberly M; Kasperski, Sarah J; O'Grady, Kevin E; Vincent, Kathryn B; Griffiths, Roland R; Wish, Eric D

    2010-06-01

    This longitudinal study examined the prevalence and correlates of energy drink use among college students, and investigated its possible prospective associations with subsequent drug use, including nonmedical prescription drug use. Participants were 1,060 undergraduates from a large, public university who completed three annual interviews, beginning in their first year of college. Use of energy drinks, other caffeinated products, tobacco, alcohol, and other illicit and prescription drugs were assessed, as well as demographic and personality characteristics. Annual weighted prevalence of energy drink use was 22.6%(wt) and 36.5%(wt) in the second and third year of college, respectively. Compared to energy drink non-users, energy drink users had heavier alcohol consumption patterns, and were more likely to have used other drugs, both concurrently and in the preceding assessment. Regression analyses revealed that Year 2 energy drink use was significantly associated with Year 3 nonmedical use of prescription stimulants and prescription analgesics, but not with other Year 3 drug use, holding constant demographics, prior drug use, and other factors. A substantial and rapidly-growing proportion of college students use energy drinks. Energy drink users tend to have greater involvement in alcohol and other drug use and higher levels of sensation-seeking, relative to non-users of energy drinks. Prospectively, energy drink use has a unique relationship with nonmedical use of prescription stimulants and analgesics. More research is needed regarding the health risks associated with energy drink use in young adults, including their possible role in the development of substance use problems.

  12. Smart HVAC Control in IoT: Energy Consumption Minimization with User Comfort Constraints

    Directory of Open Access Journals (Sweden)

    Jordi Serra

    2014-01-01

    of heating, ventilation, and air conditioning (HVAC systems in smart grids with variable energy price. To that end, first, we propose an energy scheduling method that minimizes the energy consumption cost for a particular time interval, taking into account the energy price and a set of comfort constraints, that is, a range of temperatures according to user’s preferences for a given room. Then, we propose an energy scheduler where the user may select to relax the temperature constraints to save more energy. Moreover, thanks to the IoT paradigm, the user may interact remotely with the HVAC control system. In particular, the user may decide remotely the temperature of comfort, while the temperature and energy consumption information is sent through Internet and displayed at the end user’s device. The proposed algorithms have been implemented in a real testbed, highlighting the potential gains that can be achieved in terms of both energy and cost.

  13. A novel cost based model for energy consumption in cloud computing.

    Science.gov (United States)

    Horri, A; Dastghaibyfard, Gh

    2015-01-01

    Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment.

  14. Energy drink consumption is associated with anxiety in Australian young adult males.

    Science.gov (United States)

    Trapp, Georgina S A; Allen, Karina; O'Sullivan, Therese A; Robinson, Monique; Jacoby, Peter; Oddy, Wendy H

    2014-05-01

    Energy drinks are predominantly targeted to young adult consumers; however, there has been limited research into their effects on psychological functioning in this demographic group. This study examined cross-sectional associations between energy drink consumption and mental health in a population-based sample of young adults participating in the Western Australian Pregnancy Cohort (Raine) Study. We used self-report questionnaires to assess energy drink consumption and mental health (Depression Anxiety Stress Scale-21; DASS-21) at the 20-year cohort follow-up. In the regression analyses, we considered associations between energy drink consumption (mL/day) and continuous DASS-21 scores, adjusting for sociodemographic variables, alcohol and drug use, physical activity, body mass index (BMI), and dietary intake. Our sample included 502 males and 567 females (mean age 20 ± 3 years). After adjusting for potential confounding factors and controlling for coexisting mental health problems, energy drink consumption (per 100 mL/day) was significantly associated with anxiety (but not depression or stress), and this relationship was found only in males (β = 0.32; 95% CI = 0.05, 0.58). Our study found that energy drink consumption was associated with increased anxiety in young adult males. Further research into the possible contribution of energy drink use to the development of mental health problems in young adults is needed. © 2013 Wiley Periodicals, Inc.

  15. Modeling energy consumption of residential furnaces and boilers in U.S. homes

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, James; Dunham-Whitehead, Camilla; Lekov, Alex; McMahon, James

    2004-02-01

    In 2001, DOE initiated a rulemaking process to consider whether to amend the existing energy efficiency standards for furnaces and boilers. A key factor in DOE's consideration of new standards is their cost-effectiveness to consumers. Determining cost-effectiveness requires an appropriate comparison of the additional first cost of energy efficiency design options with the savings in operating costs. This report describes calculation of equipment energy consumption (fuel and electricity) based on estimated conditions in a sample of homes that are representative of expected furnace and boiler installations. To represent actual houses with furnaces and boilers in the United States, we used a set of houses from the Residential Energy Consumption Survey of 1997 conducted by the Energy Information Administration. Our calculation methodology estimates the energy consumption of alternative (more-efficient) furnaces, if they were to be used in each house in place of the existing equipment. We developed the method of calculation described in this report for non-weatherized gas furnaces. We generalized the energy consumption calculation for this product class to the other furnace product classes. Fuel consumption calculations for boilers are similar to those for the other furnace product classes. The electricity calculations for boilers are simpler than for furnaces, because boilers do not provide thermal distribution for space cooling as furnaces often do.

  16. Energy Consumption in Location Sharing Protocols for Android Applications

    OpenAIRE

    Prihodko, Mihails

    2012-01-01

    This thesis studies the Message Queue Telemetry Transport protocol (MQTT) as an application layer protocol in geographical location sharing applications using third generation cellular communication (3G). The MQTT protocol is compared in terms of energy efficiency and amount of data generated with the Hypertext Transfer Protocol (HTTP), which is currently used in typical location sharing applications. In order to compare the communication energy efficiency of both protocols a location sharing...

  17. Estimation of Energy Consumption and Greenhouse Gas Emissions of Transportation in Beef Cattle Production

    Directory of Open Access Journals (Sweden)

    Narayanan Kannan

    2016-11-01

    Full Text Available Accounting for transportation is an important part of the life cycle analysis (LCA of beef cattle production because it is associated with energy consumption and greenhouse gas emissions. This paper describes the development and application of a model that estimates energy consumption and greenhouse gas emissions of transport in beef cattle production. The animal transport model is based on the weight and number of animals in each weight category, type of trailer, vehicle, and fuel used. The energy consumption and greenhouse gas emission estimates of animal feed transportation are based on the weight of a truckload and the number of truckloads of feed transported. Our results indicate that a truckload is travelling approximately 326 km in connection with beef cattle production in the study region. The fuel consumption amounts to 24 L of fossil fuel per 1000 kg of boneless beef. The corresponding greenhouse gas emission is 83 kg. It appears from our results that the majority of energy consumption and greenhouse gas emissions are associated with sending the finished cattle to slaughterhouses and bringing feeder cattle to feedlots. Our results point out appreciable reductions in energy consumption and greenhouse gas emissions by changing from conventional fuel to bio-fuel.

  18. A Quantitative and Systematic Methodology to Investigate Energy Consumption Issues in Multimodal Intercity Transportation Systems

    Directory of Open Access Journals (Sweden)

    Lili Du

    2015-09-01

    Full Text Available Energy issues in transportation systems have garnered increasing attention recently. This study proposes a systematic methodology for policy-makers to minimize energy consumption in multimodal intercity transportation systems considering suppliers’ operational constraints and travelers’ mobility requirements. A bi-level optimization model is developed for this purpose and considers the air, rail, private auto, and transit modes. The upper-level model is a mixed integer nonlinear program aiming to minimize energy consumption subject to transportation suppliers’ operational constraints and traffic demand distribution to paths resulting from the lower-level model. The lower-level model is a linear program seeking to maximize the trip utilities of travelers. The interactions between the multimodal transportation suppliers and intercity traffic demand are considered under the goal of minimizing system energy consumption. The proposed bi-level mixed integer model is relaxed and transformed into a mathematical program with complementarity constraints, and solved using a customized branch-and-bound algorithm. Numerical experiments, conducted using multimodal travel options between Lafayette, Indiana and Washington, D.C. reiterate that shifting traffic demand from private cars to the transit and rail modes significantly reduce energy consumption. Moreover, the proposed methodology provides tools to quantitatively analyze system energy consumption and traffic demand distribution among transportation modes under specific policy instruments. The results illustrate the need to systematically incorporate the interactions among traveler preferences, network structure, and supplier operational schemes to provide policy-makers insights for developing traffic demand shift mechanisms to minimize system energy consumption. Hence, the proposed methodology provide policy-makers the capability to analyze energy consumption in the transportation sector by a

  19. Relative contribution of different muscle energy consumption processes in an energy-based muscle load sharing cost function

    NARCIS (Netherlands)

    Nikooyan, A.A.; Veeger, H.E.J.; Westerhoff, P.; Bergmann, G.; van der Helm, F.C.T.

    2013-01-01

    The aim of this study is to quantify the relative contributions of two muscle energy consumption processes (the detachment of cross-bridges and calcium-pumping) incorporated in a recently developed muscle load sharing cost function, namely the energy-based criterion, by using in vivo measured

  20. The relationship between economic growth, energy consumption, and CO2 emissions: Empirical evidence from China.

    Science.gov (United States)

    Wang, Shaojian; Li, Qiuying; Fang, Chuanglin; Zhou, Chunshan

    2016-01-15

    Following several decades of rapid economic growth, China has become the largest energy consumer and the greatest emitter of CO2 in the world. Given the complex development situation faced by contemporary China, Chinese policymakers now confront the dual challenge of reducing energy use while continuing to foster economic growth. This study posits that a better understanding of the relationship between economic growth, energy consumption, and CO2 emissions is necessary, in order for the Chinese government to develop the energy saving and emission reduction strategies for addressing the impacts of climate change. This paper investigates the cointegrating, temporally dynamic, and casual relationships that exist between economic growth, energy consumption, and CO2 emissions in China, using data for the period 1990-2012. The study develops a comprehensive conceptual framework in order to perform this analysis. The results of cointegration tests suggest the existence of long-run cointegrating relationship among the variables, albeit with short dynamic adjustment mechanisms, indicating that the proportion of disequilibrium errors that can be adjusted in the next period will account for only a fraction of the changes. Further, impulse response analysis (which describes the reaction of any variable as a function of time in response to external shocks) found that the impact of a shock in CO2 emissions on economic growth or energy consumption was only marginally significant. Finally, Granger casual relationships were found to exist between economic growth, energy consumption, and CO2 emissions; specifically, a bi-directional causal relationship between economic growth and energy consumption was identified, and a unidirectional causal relationship was found to exist from energy consumption to CO2 emissions. The findings have significant implications for both academics and practitioners, warning of the need to develop and implement long-term energy and economic policies in

  1. An online interactive tool to assess energy consumption in residential buildings and for daily mobility

    OpenAIRE

    Marique, Anne-Françoise; de Meester, Tatiana; De Herde, André; Reiter, Sigrid

    2014-01-01

    Improving energy efficiency in the building and transportation sectors is a viable approach to mitigate the effects of climate change and has become an important policy target. As a result, in addition to scientific research and public policies addressing energy efficiency, raising public awareness of the impact of the behaviour of citizens to energy efficiency is crucial and could quickly lead to significant reductions in the total energy consumption of a territory. In this context, this pap...

  2. Assessment of pattern for consumption and awareness regarding energy drinks among medical students

    OpenAIRE

    Aslam, Hafiz Muhammad; Mughal, Anum; Edhi, Muhammad Muzzammil; Saleem, Shafaq; Rao, Masood Hussain; Aftab, Anum; Hanif, Maliha; Ahmed, Alina; Khan, Agha Muhammad Hammad

    2013-01-01

    Background Energy drink is a type of beverage which contains stimulant drugs chiefly caffeine and marketed as mental and physical stimulator. Coffee, tea, soft drinks and other caffeinated beverages are not considered as energy drinks. Purpose of our study was to evaluate the awareness of medical students regarding energy drinks and their pattern and reason of energy drinks consumption. Methods This was a cross sectional and observational study conducted during the period of January – Decembe...

  3. Gender and ethical consumption of energy in smart homes

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten; Mechlenborg, Mette; Madsen, Line Valdorff

    2017-01-01

    An adaption to smart technologies in homes will inevitably produce new conditions for everyday life and thus also for relations between gender and ethical consumption. The home can be seen as a feminine domain and research shows that men tend to be more technically interested, whereas women...... in everyday life. Acknowledging how everyday life and home are gendered and that gender roles are produced and reproduced through everyday practices, is therefore vital to ensure a successful transition into a smart home future. Otherwise, the risk is that the development will contribute to producing further...... generally tend to be more environmentally concerned and engaged in taking action according to climate changes. The smart technology agenda, which now focus on a masculine ideal consumer, might therefore benefit from a stronger inclusion of women to support a successful adaptation of smart technologies...

  4. Smart campus: Data on energy consumption in an ICT-driven university.

    Science.gov (United States)

    Popoola, Segun I; Atayero, Aderemi A; Okanlawon, Theresa T; Omopariola, Benson I; Takpor, Olusegun A

    2018-02-01

    In this data article, we present a comprehensive dataset on electrical energy consumption in a university that is practically driven by Information and Communication Technologies (ICTs). The total amount of electricity consumed at Covenant University, Ota, Nigeria was measured, monitored, and recorded on daily basis for a period of 12 consecutive months (January-December, 2016). Energy readings were observed from the digital energy meter (EDMI Mk10E) located at the distribution substation that supplies electricity to the university community. The complete energy data are clearly presented in tables and graphs for relevant utility and potential reuse. Also, descriptive first-order statistical analyses of the energy data are provided in this data article. For each month, the histogram distribution and time series plot of the monthly energy consumption data are analyzed to show insightful trends of energy consumption in the university. Furthermore, data on the significant differences in the means of daily energy consumption are made available as obtained from one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests. The information provided in this data article will foster research development in the areas of energy efficiency, planning, policy formulation, and management towards the realization of smart campuses.

  5. Smart campus: Data on energy consumption in an ICT-driven university

    Directory of Open Access Journals (Sweden)

    Segun I. Popoola

    2018-02-01

    Full Text Available In this data article, we present a comprehensive dataset on electrical energy consumption in a university that is practically driven by Information and Communication Technologies (ICTs. The total amount of electricity consumed at Covenant University, Ota, Nigeria was measured, monitored, and recorded on daily basis for a period of 12 consecutive months (January–December, 2016. Energy readings were observed from the digital energy meter (EDMI Mk10E located at the distribution substation that supplies electricity to the university community. The complete energy data are clearly presented in tables and graphs for relevant utility and potential reuse. Also, descriptive first-order statistical analyses of the energy data are provided in this data article. For each month, the histogram distribution and time series plot of the monthly energy consumption data are analyzed to show insightful trends of energy consumption in the university. Furthermore, data on the significant differences in the means of daily energy consumption are made available as obtained from one-way Analysis of Variance (ANOVA and multiple comparison post-hoc tests. The information provided in this data article will foster research development in the areas of energy efficiency, planning, policy formulation, and management towards the realization of smart campuses.

  6. Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

    Science.gov (United States)

    Carlson, Derrick R.

    While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity

  7. Experimental verification of an energy consumption signal tool for operational decision support in an office building

    Energy Technology Data Exchange (ETDEWEB)

    Pavlak, Gregory S.; Henze, Gregor P.; Hirsch, Adam I.; Florita, Anthony R.; Dodier, Robert H.

    2016-12-01

    This paper demonstrates an energy signal tool to assess the system-level and whole-building energy use of an office building in downtown Denver, Colorado. The energy signal tool uses a traffic light visualization to alert a building operator to energy use which is substantially different from expected. The tool selects which light to display for a given energy end-use by comparing measured energy use to expected energy use, accounting for uncertainty. A red light is only displayed when a fault is likely enough, and abnormal operation costly enough, that taking action will yield the lowest cost result. While the theoretical advances and tool development were reported previously, it has only been tested using a basic building model and has not, until now, been experimentally verified. Expected energy use for the field demonstration is provided by a compact reduced-order representation of the Alliance Center, generated from a detailed DOE-2.2 energy model. Actual building energy consumption data is taken from the summer of 2014 for the office building immediately after a significant renovation project. The purpose of this paper is to demonstrate a first look at the building following its major renovation compared to the design intent. The tool indicated strong under-consumption in lighting and plug loads and strong over-consumption in HVAC energy consumption, which prompted several focused actions for follow-up investigation. In addition, this paper illustrates the application of Bayesian inference to the estimation of posterior parameter probability distributions to measured data. Practical discussion of the application is provided, along with additional findings from further investigating the significant difference between expected and actual energy consumption.

  8. Safe Upper-Bounds Inference of Energy Consumption for Java Bytecode Applications

    Science.gov (United States)

    Navas, Jorge; Mendez-Lojo, Mario; Hermenegildo, Manuel V.

    2008-01-01

    Many space applications such as sensor networks, on-board satellite-based platforms, on-board vehicle monitoring systems, etc. handle large amounts of data and analysis of such data is often critical for the scientific mission. Transmitting such large amounts of data to the remote control station for analysis is usually too expensive for time-critical applications. Instead, modern space applications are increasingly relying on autonomous on-board data analysis. All these applications face many resource constraints. A key requirement is to minimize energy consumption. Several approaches have been developed for estimating the energy consumption of such applications (e.g. [3, 1]) based on measuring actual consumption at run-time for large sets of random inputs. However, this approach has the limitation that it is in general not possible to cover all possible inputs. Using formal techniques offers the potential for inferring safe energy consumption bounds, thus being specially interesting for space exploration and safety-critical systems. We have proposed and implemented a general frame- work for resource usage analysis of Java bytecode [2]. The user defines a set of resource(s) of interest to be tracked and some annotations that describe the cost of some elementary elements of the program for those resources. These values can be constants or, more generally, functions of the input data sizes. The analysis then statically derives an upper bound on the amount of those resources that the program as a whole will consume or provide, also as functions of the input data sizes. This article develops a novel application of the analysis of [2] to inferring safe upper bounds on the energy consumption of Java bytecode applications. We first use a resource model that describes the cost of each bytecode instruction in terms of the joules it consumes. With this resource model, we then generate energy consumption cost relations, which are then used to infer safe upper bounds. How

  9. Consumption of energy drinks among lebanese youth: a pilot study on the prevalence and side effects.

    Science.gov (United States)

    Itany, Manal; Diab, Batoul; Rachidi, Samar; Awada, Sanaa; Al Hajje, Amal; Bawab, Wafaa; Salameh, Pascale

    2014-09-01

    The new millennium has been together with a variety of synthetic and caffeinated high-energy drinks targeting the youth market. Energy drinks raise the level of energy and their consumption has been increased significantly worldwide. This research aimed to determine patterns of energy drink consumption and to assess the prevalence of adverse side effects among energy drink users. A pilot cross-sectional study survey was undertaken on students aged between 13 and 30 years in private and public schools and universities in Lebanon over 5 months. A self-administered questionnaire was used inquiring about sociodemographic characteristics, consumption patterns, attitudes and beliefs about energy drinks. Bivariate and multivariate analyses were conducted. Data was analyzed using SPSS 17. We studied 1500 students (mean age: 18.92 ± 1.85; 51.3% were males). The overall prevalence of energy drinks consumption was 63.6% (60.5% were males), among which 50.5% used alcoholic energy drinks. Respondents indicated that most consumed energy drinks were "Red Bull" and "Boom Boom" (70.9% and 51.5% respectively). In total, 64.5% of participants believed the effect of these drinks in energizing the body, and 72.7% believed that they can stimulate intellectual capacities. In addition, 29.6% of consumers experienced at least one adverse effect, where tachycardia was reported in 21.1% of cases. On the other hand, desired effects felt after consumption were mostly pleasure (33.8%). Males had a 3-time more risk of consuming such drinks compared to females (OR: 0.381, P energy drinks consumption and regions outside Beirut (OR: 1.401, P: 0.006; 95% CI: 1.103-1.781), medical field of work (OR: 0.376, P: 0.010; 95% CI: 0.179-0.790) and higher personal income (OR: 1.317, P energy drinks consumption among youth. The current results highlight the importance of education to prevent the consumption of energy drinks in excessive quantities and modifying some wrong perceptions regarding the benefits

  10. Energy consumption and conservation psychology: A review and conceptual analysis

    Science.gov (United States)

    Shippee, Glenn

    1980-07-01

    The burgeoning literature devoted to “the psychology of energy consumption” is categorized by specific methodological approach, is critically reviewed, and is conceptually analyzed. Three main categories of energy research are discerned, these categories corresponding to the traditional methodological typology of the survey study, the field experiment, and the laboratory investigation. For each of these major approaches, several subcategories and special topic areas are noted and discussed. The intention of these conceptual analyses is to stimulate research interest and to provide directions for future research activities. The review concludes with the encouraging observation that several directions can be generalized from the literature. More importantly, these generalizations are corroborated across experiments conducted within each major methodological approach. The importance of behavioral approaches to energy issues and the necessity for additional governmental support for these activities is also emphasized.

  11. Energy consumption optimization of the total-FETI solver by changing the CPU frequency

    Science.gov (United States)

    Horak, David; Riha, Lubomir; Sojka, Radim; Kruzik, Jakub; Beseda, Martin; Cermak, Martin; Schuchart, Joseph

    2017-07-01

    The energy consumption of supercomputers is one of the critical problems for the upcoming Exascale supercomputing era. The awareness of power and energy consumption is required on both software and hardware side. This paper deals with the energy consumption evaluation of the Finite Element Tearing and Interconnect (FETI) based solvers of linear systems, which is an established method for solving real-world engineering problems. We have evaluated the effect of the CPU frequency on the energy consumption of the FETI solver using a linear elasticity 3D cube synthetic benchmark. In this problem, we have evaluated the effect of frequency tuning on the energy consumption of the essential processing kernels of the FETI method. The paper provides results for two types of frequency tuning: (1) static tuning and (2) dynamic tuning. For static tuning experiments, the frequency is set before execution and kept constant during the runtime. For dynamic tuning, the frequency is changed during the program execution to adapt the system to the actual needs of the application. The paper shows that static tuning brings up 12% energy savings when compared to default CPU settings (the highest clock rate). The dynamic tuning improves this further by up to 3%.

  12. Energy consumption of household refrigerator: experimentation and modelling; Interaction energetique batiment-equipement experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Saheb, Y.

    2003-12-01

    Monitoring projects showed that energy consumption of household refrigerators varies from 22% (Denmark) to 41% (Lebanon) of household electricity bill depending of use conditions. To study the influence of each use condition, we monitored during one week, energy consumption of two domestic refrigerators used in normal way by families in Algiers and the ambient temperature of each kitchen. From this, we found correlation between energy consumption of appliances and indoor air temperature. Then, we modelled the system. The equations of the refrigerant loop have been considered in a static mode and solved using Engineering Equation Solver, EES. While the refrigerator cabinet considered in a dynamic mode is a new TRNSYS Type. After that, we coupled this model to an existing building model, Type 56 of TRNSYS library. In the coupling model, the influence of indoor temperature and the heat rejected by the appliance are taken into account. In one hand, the simulation results showed that the influence of ambient temperature on energy consumption is more important for refrigerators with bad insulation. In the other hand, the improving of refrigerator insulation (class G to A) decreases by two-third the energy consumption. This study is supported by the French Agency for Environment and Energy Management. (author)

  13. Sports/energy drinks consumption among young athletes in Kano ...

    African Journals Online (AJOL)

    Athletes who had 'ever' tried a sport drink were significantly higher (p<0.05) than those who had 'never' tasted the drink. Main reasons for using such drinks for regular users varied across the selected groups of athletes and included obtaining energy and boosting performance while doing sport. Most athletes claimed to be ...

  14. Impact of water hardness on energy consumption of geyser heating ...

    African Journals Online (AJOL)

    South Africa is an electricity-stressed country with a growing energy demand. Globally, hot water appliances are major consumers of electricity. Poor water quality for domestic purposes is a concern that may affect the efficiency of hot water appliances. Therefore, the Eskom Research, Testing, and Development Business ...

  15. A ''Millipede'' scanner model - Energy consumption and performance

    NARCIS (Netherlands)

    Engelen, Johannes Bernardus Charles; Khatib, M.G.

    2008-01-01

    This short report (1) describes an energy model for the seek and read/write operations in a mass-balanced Y-scanner for parallel-probe storage by IBM [1] and (2) updates the settings of the MEMS model in DiskSim with recent published figures from this XY-scanner. To speedup system simulations, a

  16. Trends in Residential Energy Consumption in Saudi Arabia with Particular Reference to the Eastern Province

    Directory of Open Access Journals (Sweden)

    Farajallah Alrashed

    2014-12-01

    Full Text Available Residential buildings are vital in the energy scenario of Saudi Arabia as they account for 52% of the total electricity consumption. The Eastern Province, due to its harsh weather conditions, is one of the most challenging areas in Saudi Arabia in terms of residential energy consumption. The province is vital also because of its large land area, accounting for almost one third of the entire country. This article investigates some of the important factors related to the residential energy consumption i.e. weather conditions, types of dwellings, building envelops, air-conditioning (A/C systems and domestic appliances especially cooking ovens. The work is based upon an analysis of the actual monthly electricity consumption for 115 dwellings in Dhahran for the year 2012. The investigated buildings include 62 apartments, 28 villas, and 25 traditional houses. The annual average electricity consumption for the surveyed dwellings was found to be 176.5 kWh/m2, a value higher than international energy-efficiency benchmarks. It is found that the use of mini-split A/C systems, thermal insulation and double-glazed windows can help reduce the electricity consumption by over 30%.

  17. Understanding household energy consumption patterns: When 'West Is Best' in Metro Manila

    Energy Technology Data Exchange (ETDEWEB)

    Sahakian, Marlyne D., E-mail: marlyne.sahakian@graduateinstitute.c [Graduate Institute of International and Development Studies, Development Studies, 20 rue Rothschild, 1207 Geneva (Switzerland)

    2011-02-15

    This paper addresses the topic of energy and development through a multi-disciplinary and systemic approach that combines environmental considerations with a social understanding of consumption. The focus is on electricity usage in the home and specifically lighting and cooling. Set in the urban mega-polis of Metro Manila, the Philippines, energy consumption is first placed in its biophysical perspective: the energy sources and electricity grid are presented, in relation to the Philippines as well as the region. The research findings then explore the social and cultural drivers behind household electricity consumption, revealing in several examples the strong influence of globalization-understood here as the flow of people, remittances, images and ideas. Policy recommendations are provided, based on the research results, with concluding remarks relevant to other similar contexts. - Research highlights: {yields}Metro Manila household electricity consumption is environmentally significant. {yields}The meaning given to electricity services varies by socio-economic group. {yields}Structural conditions, such as building type, can lock-in energy consumption. {yields}Global flows-people, ideas, remittances-influence local consumption patterns. {yields}Social networks, rather than the individual consumer, can influence change.

  18. A New System to Estimate and Reduce Electrical Energy Consumption of Domestic Hot Water in Spain

    Directory of Open Access Journals (Sweden)

    Alberto Gutierrez-Escolar

    2014-10-01

    Full Text Available Energy consumption rose about 28% over the 2001 to 2011 period in the Spanish residential sector. In this environment, domestic hot water (DHW represents the second highest energy demand. There are several methodologies to estimate DHW consumption, but each methodology uses different inputs and some of them are based on obsolete data. DHW energy consumption estimation is a key tool to plan modifications that could enhance this consumption and we decided to update the methodologies. We studied DHW consumption with data from 10 apartments in the same building during 18 months. As a result of the study, we updated one chosen methodology, adapting it to the current situation. One of the challenges to improve efficiency of DHW use is that most of people are not aware of how it is consumed in their homes. To help this information to reach consumers, we developed a website to allow users to estimate the final electrical energy needed for DHW. The site uses three estimation methodologies and chooses the best fit based on information given by the users. Finally, the application provides users with recommendations and tips to reduce their DHW consumption while still maintaining the desired comfort level.

  19. Analysis and clustering of natural gas consumption data for thermal energy use forecasting

    Science.gov (United States)

    Franco, Alessandro; Fantozzi, Fabio

    2015-11-01

    In this paper, after a brief analysis of the connections between the uses of natural gas and thermal energy use, the natural gas consumption data related to Italian market are analyzed and opportunely clustered in order to compute the typical consumption profile in different days of the week in different seasons and for the different class of users: residential, tertiary and industrial. The analysis of the data shows that natural gas consumption profile is mainly related to seasonality pattern and to the weather conditions (outside temperature, humidity and wind chiller). There is also an important daily pattern related to industrial and civil sector that, at a lower degree than the previous one, does affect the consumption profile and have to be taken into account for defining an effective short and mid term thermal energy forecasting method. A possible mathematical structure of the natural gas consumption profile is provided. Due to the strong link between thermal energy use and natural gas consumption, this analysis could be considered the first step for the development of a model for thermal energy forecasting.

  20. Motorcycles, mopeds: polluting emissions and energy consumption. Initial observations

    Energy Technology Data Exchange (ETDEWEB)

    Barbusse, St.

    2001-05-01

    for automobile air-conditioning had been retained, ADEME initiated a campaign for evaluating exhaust emissions and consumption by two-wheel vehicles in laboratory tests. This campaign makes it possible to obtain a 'photo' of present two-wheel emissions and consumption and to better gauge the stakes associated to the evolution of this category of vehicle. The goal of this present document is to establish the state of the art of what actually exists concerning the fleet and the levels of pollutant emissions through the findings of this testing campaign. (author)

  1. Measurements relating fire radiative energy density and surface fuel consumption - RxCADRE 2011 and 2012

    Science.gov (United States)

    Andrew T. Hudak; Matthew B. Dickinson; Benjamin C. Bright; Robert L. Kremens; E. Louise Loudermilk; Joseph J. O' Brien; Benjamin S. Hornsby; Roger D. Ottmar

    2016-01-01

    Small-scale experiments have demonstrated that fire radiative energy is linearly related to fuel combusted but such a relationship has not been shown at the landscape level of prescribed fires. This paper presents field and remotely sensed measures of pre-fire fuel loads, consumption, fire radiative energy density (FRED) and fire radiative power flux density (FRFD),...

  2. Interactions among energy consumption, economic development and greenhouse gas emissions in Japan after World War II

    Science.gov (United States)

    The long-term dynamic changes in the triad, energy consumption, economic development, and Greenhouse gas (GHG) emissions, in Japan after World War II were quantified, and the interactions among them were analyzed based on an integrated suite of energy, emergy and economic indices...

  3. Expected satiation after repeated consumption of low-or high-energy-dense soup

    NARCIS (Netherlands)

    Hogenkamp, P.S.; Brunstrom, J.M.; Stafleu, A.; Mars, M.; Graaf, C. de

    2012-01-01

    We investigated whether repeated consumption of a low-energy-dense (LED; 208 kJ/100 g) or high-energy-dense (HED; 645 kJ/100 g) soup modifies expectations relating to the satiating capacity of the food, and its subsequent intake. In study 1, participants consumed either a novel-flavoured LED (n 32;

  4. Expected satiation after repeated consumption of low- or high-energy-dense soup

    NARCIS (Netherlands)

    Hogenkamp, P.S.; Brunstrom, J.M.; Stafleu, A.; Mars, M.; Graaf, de C.

    2012-01-01

    We investigated whether repeated consumption of a low-energy-dense (LED; 208 kJ/100 g) or high-energy-dense (HED; 645 kJ/100 g) soup modifies expectations relating to the satiating capacity of the food, and its subsequent intake. In study 1, participants consumed either a novel-flavoured LED (n 32;

  5. Analysis of the Potential Impacts on China’s Industrial Structure in Energy Consumption

    Directory of Open Access Journals (Sweden)

    Yushen Tian

    2017-12-01

    Full Text Available Industrial structure is one of the main factors that determine energy consumption. Based on China’s energy consumption in 2015 and the goals in 13th Five-Year Plan for Economic and Social Development of the People’s Republic of China (The 13th Five-Year Plan, this paper established an input–output fuzzy multi-objective optimization model to estimate the potential impacts of China’s industrial structure on energy consumption in 2015. Results showed that adjustments to industrial structure could save energy by 19% (1129.17 million ton standard coal equivalent (Mtce. Second, China’s equipment manufacturing industry has a large potential to save energy. Third, the development of several high energy intensive and high carbon intensive sectors needs to be strictly controlled, including Sector 25 (electricity, heat production, and supply industry, Sector 11 (manufacture of paper and stationery, printing, and Sector 14 (non-metallic mineral products industry. Fourth, the territory industry in China has a great potential for energy saving, while its internal structure still needs to be upgraded. Finally, we provide policy suggestions that may be adopted to reduce energy consumption by adjusting China’s industrial structure.

  6. Woody biomass pretreatment for cellulosic ethanol production : technology and energy consumption evaluation

    Science.gov (United States)

    Junyong Zhu; X.J. Pan

    2010-01-01

    This review presents a comprehensive discussion of the key technical issues in woody biomass pretreatment: barriers to efficient cellulose saccharification, pretreatment energy consumption, in particular energy consumed for wood-size reduction, and criteria to evaluate the performance of a pretreatment. A post-chemical pretreatment size-reduction approach is proposed...

  7. Morphological effects of long-term consumption of energy drinks on ...

    African Journals Online (AJOL)

    Morphological effects of long-term consumption of energy drinks on the intracranial visual relay centres namely superior colliculus and lateral geniculate body of adult ... The rats in the treated group received energy drinks and distilled water alternatively on a daily basis for 10hrs and 14hrs liberally in thirty days, while the ...

  8. The global contribution of energy consumption by product exports from China.

    Science.gov (United States)

    Tang, Erzi; Peng, Chong

    2017-06-01

    This paper presents a model to analyze the mechanism of the global contribution of energy usage by product exports. The theoretical analysis is based on the perspective that contribution estimates should be in relatively smaller sectors in which the production characteristics could be considered, such as the productivity distribution for each sector. Then, we constructed a method to measure the global contribution of energy usage. The simple method to estimate the global contribution is the percentage of goods export volume compared to the GDP as a multiple of total energy consumption, but this method underestimates the global contribution because it ignores the structure of energy consumption and product export in China. According to our measurement method and based on the theoretical analysis, we calculated the global contribution of energy consumption only by industrial manufactured product exports in a smaller sector per industry or manufacturing sector. The results indicated that approximately 42% of the total energy usage in the whole economy for China in 2013 was contributed to foreign regions. Along with the primary products and service export in China, the global contribution of energy consumption for China in 2013 by export was larger than 42% of the total energy usage.

  9. On the Trade-off between Energy Consumption and Food Quality Loss in Supermarket Refrigeration Systems

    DEFF Research Database (Denmark)

    Cai, Junping; Jensen, Jørgen Bauck; Skogestad, Sigurd

    2008-01-01

    This paper studies the trade-off between energy consumption and food quality loss, at varying ambient conditions, in supermarket refrigeration systems. Compared with the traditional operation with pressure control, a large potential for energy savings without extra loss of food quality...... is demonstrated. We also show that by utilizing the relatively slow dynamics of the food temperature, compared with the air temperature, we are able to further lower both the energy consumption and the peak value of power requirement. The Pareto optimal curve is found by off-line optimization....

  10. Limiting Energy Consumption by Decreasing Packets Retransmissions in 5G Network

    Directory of Open Access Journals (Sweden)

    Łukasz Apiecionek

    2017-01-01

    Full Text Available This article presents the potential of using Multipath Transmission Control Protocol for limiting the energy consumption in 5G network. The number of errors occurring during packet transmissions and in effect the number of retransmissions affect the consumption of energy by the devices in the network. The paper analyzes the potential energy savings from implementing an algorithm for detecting problems and predicting the future retransmissions. Although this is the main object of the paper, it must be emphasized that the proposed method also allows increasing the speed of transmission and improving the security of the data and it is easy to implement in 5G networks.

  11. Global Primary Energy Consumption | Consommation mondiale d’énergie primaire

    Directory of Open Access Journals (Sweden)

    2012-05-01

    Full Text Available World Energy Consumption Evolution*(1980–2007Evolution de la consommation mondiale d’énergie* (1980-2007*Energy consumption (or use: use of primary energy before transformation to other end-use fuels, which is equal to indigenous production plus imports and stock changes, minus exports and fuels supplied to ships and aircraft engaged in international transport. (World Bank, 2010 | Consommation (ou utilisation d’énergie: utilisation d’énergie primaire avant sa transformation en autres com...

  12. THE IMPORTANCE OF RECYCLING AND REDUCING ENERGY CONSUMPTIONS IN ASSURING OF SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    DOBROTĂ GABRIELA

    2016-12-01

    Full Text Available Sustainable development implies development of economic activities so as to ensure rational use of resources and environmental protection. In the context of limited resources, a great importance have the reuse and recycling. But these processes take place with other consumptions, especially by energy. The energy efficiency is a way to ensure the performance and competitiveness, and, in the some time, a condition for reducing of greenhouse gases emissions and of financial costs to consumers. This article reflects some aspects of the need to reduce energy consumption in the production process of recycling (considering the structure of production costs and the importance of innovation management in this process.

  13. Energy drinks consumption practices among medical students of a Private sector University of Karachi, Pakistan.

    Science.gov (United States)

    Usman, Asma; Bhombal, Swaleha Tariq; Jawaid, Ambreen; Zaki, Samar

    2015-09-01

    Consumption of energy drinks has become popular among students and athletes over the past few years. To explore the phenomenon, a cross-sectional survey was conducted through a self-administered pilot-tested questionnaire. Frequency of energy drinks consumption was found to be 121(52%) in a sample of 233 medical students. Red bull was the most common brand consumed 101(43%). The major reasons reported for its usage were to gain/replenish energy by 36(15.4%), and studying for examination by 34(14.6%). Television was reported as the major source of information 153(66%) followed by friends 113(48%). There was a high frequency of energy drinks' consumption among medical students of a private university. There is a strong need to create awareness regarding these drinks, especially among adolescents and teenagers.

  14. Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions.

    Science.gov (United States)

    Williams, Daniel R; Tang, Yinshan

    2013-05-07

    Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft's cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

  15. Relationship between Energy Consumption, CO2 Emissions, Economic Growth and Trade in India

    Directory of Open Access Journals (Sweden)

    Srinivasan Palamalai

    2015-04-01

    Full Text Available The purpose of the study is to examine the causal nexus between various sources of energy consumption, viz. Coal, Crude Oil, Electricity and Natural Gas, CO2 emissions, economic growth and trade in India using the Perron unit root test, Gregory and Hansen cointegration test and Vector Error Correction Model. The study exhibits a long-run relationship between various sources of energy consumption, economic growth, CO2 emissions and trade in India. By and large, the empirical results confirm that economic growth fuels rate of various sources of energy consumption i.e. coal, crude petroleum, electricity and natural gas. The findings reveal that increase in CO2 emissions leads to achieve high level of economic activity in India. In addition, the study finds that foreign trade influences the various sources of non-renewable energy consumption in the long-term. However, the energy consumption do not significantly contributes towards promoting foreign trade, except crude petroleum, in the short-run.

  16. The Analysis of Electrical Energy Consumption of the Impact Screwdriver During Assembly of Fixed Threaded Joints

    Science.gov (United States)

    Grinevich, I.; Nikishin, Vl.; Mozga, N.; Laitans, M.

    2017-06-01

    The paper deals with the possibilities of reducing the consumption of electrical energy of the impact screwdriver during the assembly of fixed threaded joints. The recommendations related to a decrease in electrical energy consumption would allow reducing product costs but so far there have been no such recommendations from the producers of the tool as to the effective operating regimes of the impact screwdrivers in relation to electrical energy consumption and necessary tightening moment of the nut. The aim of the study is to find out the economical operating mode of the electrical impact screwdriver when assembling fixed threaded joints. By varying the set speed of the rotor head and working time of the impact mechanism, there is an opportunity to determine electrical energy consumption of the tool for the given tightening moment. The results of the experiment show that at the same tightening moment obtained the electrical energy consumption of the impact screwdriver is less at a higher starting set speed of the rotor head but shorter operating time of the impact mechanism than at a lower speed of the rotor head and longer operating time of the impact mechanism.

  17. Energy Consumption Prediction for Electric Vehicles Based on Real-World Data

    Directory of Open Access Journals (Sweden)

    Cedric De Cauwer

    2015-08-01

    Full Text Available Electric vehicle (EV energy consumption is variable and dependent on a number of external factors such as road topology, traffic, driving style, ambient temperature, etc. The goal of this paper is to detect and quantify correlations between the kinematic parameters of the vehicle and its energy consumption. Real-world data of EV energy consumption are used to construct the energy consumption calculation models. Based on the vehicle dynamics equation as underlying physical model, multiple linear regression is used to construct three models. Each model uses a different level of aggregation of the input parameters, allowing predictions using different types of available input parameters. One model uses aggregated values of the kinematic parameters of trips. This model allows prediction with basic, easily available input parameters such as travel distance, travel time, and temperature. The second model extends this by including detailed acceleration data. The third model uses the raw data of the kinematic parameters as input parameters to predict the energy consumption. Using detailed values of kinematic parameters for the prediction in theory increases the link between the statistical model and its underlying physical principles, but requires these parameters to be available as input in order to make predictions. The first two models show similar results. The third model shows a worse fit than the first two, but has a similar accuracy. This model has great potential for future improvement.

  18. The effects of utility cost reduction on residential energy consumption in Hungary – a decomposition analysis

    Directory of Open Access Journals (Sweden)

    Tekla Sebestyén Szép

    2017-01-01

    Full Text Available The residential energy consumption is influenced by a lot of factors. Understanding and calculating these factors is essential to making conscious energy policy decisions and feedbacks. Since 2013 the energy prices for households have been controlled by the government in Hungary and as a result of the utility cost reduction program a sharp decline can be observed in residential electricity, district heating and natural gas prices. This paper applies the LMDI (~Logarithmic Mean Division Index method to decompose the absolute change of the residential energy consumption during the period of 2010-2015. We calculate the price, the intensive structure (it means the change of energy expenditure share on energy sources, the extensive structure (it is in connection with the change of energy expenditure share in total expenditure, expenditure (it is the change of per capita total expenditure and population effect. All of that shows the impact of the specific factor on the residential energy consumption by income deciles. Our results have verified the preliminary expectations: the decreasing energy prices for households have a positive impact on energy use and it has been strengthened by the expenditure effect as well. However, the intensive structure, the extensive structure and the population effect have largely offset it.

  19. THE RELATIONSHIP BETWEEN PRIMARY ENERGY CONSUMPTION, PRODUCTION AND GROSS DOMESTIC INCOME (GDP IN TURKEY

    Directory of Open Access Journals (Sweden)

    ÖZGE KORKMAZ

    2013-06-01

    Full Text Available The ability to reach a sustainable economic growth of countries initially depends on the usage of energy resources efficiently. But an unequal  distribution of energy resources in the world increases the dependency on energy in countries which have insufficient energy resources such as Turkey. Therefore, it has a great importance to analyze the share of imported energy resources for economic growth. The correlation between energy consumption and changes in gross domestic product, increases the importance of energy policies while determining  the economical policies of countries. In this study, the causality relationship between energy consumption, energy generation  and GDP in Turkey are examined using annual data for the period 1960-2009. Johansen Cointegration Causality Test and Vector Error Correction Mechanism (VECM is used for this study. Empirical results for the period under discussion there is a relationship between the variables and error correction mechanism based on long-term Granger causality test. It showed that  bileteral causality  with the energy consumption to GDP.

  20. Energy consumption in barley and turnip rape cultivation for bioethanol and biodiesel (RME) production

    Energy Technology Data Exchange (ETDEWEB)

    Mikkola, Hannu; Ahokas, Jukka [University of Helsinki, Faculty of Agriculture and Forestry, Department of Agricultural Sciences, FIN-00014 Helsingin yliopisto (Finland); Pahkala, Katri [MTT, Agrifood Research Finland, Crop Science and Technology, FIN-31600 Jokioinen (Finland)

    2011-01-15

    The energy consumption for six spring barley (Hordeum vulgare L.) production chains and five spring turnip rape (Brassica rapa ssp. oleifera (DC) Metsg.) production chains were compared with each other and in relation to the energy content of the seed yield. Two cultivation intensities, standard and intensive production, were used for barley. Fertiliser production and grain drying were the most energy consuming phases of the chains. The production of nitrogen fertiliser alone accounted for 1/3-1/2 of the total energy consumption of the production chains. If barley were direct drilled and the yield stored in airtight silos, instead of drying, the energy consumption would decrease by 30-34%. Use of wood-chips instead of oil for grain drying would decrease the use of fossil fuel to the same extent. The input-output ratios for the intensive barley production chains were 0.18-0.25. They were somewhat lower than the ratios for the standard production intensity. The intensive production was more energy efficient despite higher input rates. The input-output ratios for turnip rape production were 0.32-0.34. The energy consumption for manufacturing, repair and maintenance of machines and buildings requires more research because it is a significant factor but the data available are largely old and few studies have been conducted. (author)

  1. An EMG-driven model applied for predicting metabolic energy consumption during movement.

    Science.gov (United States)

    Bisi, Maria Cristina; Stagni, Rita; Houdijk, Han; Gnudi, Gianni

    2011-12-01

    The relationship between mechanical work and metabolic energy cost during movement is not yet clear. Many studies demonstrated the utility of forward-dynamic musculoskeletal models combined with experimental data to address such question. The aim of this study was to evaluate the applicability of a muscle energy expenditure model at whole body level, using an EMG-driven approach. Four participants performed a 5-min squat exercise on unilateral leg press at two different frequencies and two load levels. Data collected were kinematics, EMG, forces and moments under the foot and gas-exchange data. This same task was simulated using a musculoskeletal model, which took EMG and kinematics as inputs and gave muscle forces and muscle energetics as outputs. Model parameters were taken from literature, but maximal isometric muscle force was optimized in order to match predicted joint moments with measured ones. Energy rates predicted by the model were compared with energy consumption measured by the gas-exchange data. Model results on metabolic energy consumption were close to the values obtained through indirect calorimetry. At the higher frequency level, the model underestimated measured energy consumption. This underestimation can be explained with an increase in energy consumption of the non-muscular mass with movement velocity. In conclusion, results obtained in comparing model predictions with experimental data were promising. More research is needed to evaluate this way of computing mechanical and metabolic work. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Linking food waste prevention, energy consumption and microbial food safety: the next challenge of food policy?

    OpenAIRE

    Duret, Steven; Hoang, Hong-Minh; Flick, Denis; Nguyen The, Christophe; Laguerre, Onrawee

    2016-01-01

    Food safety has governed food policy for decades. More recently, concerns about sustainability of food chains have emerged. Food sustainability is becoming an increasingly important issue because food systems are not sustainable in terms of consumption of resources, their impact on ecosystems or their effect on health and social equality. A focus is given on how microbial food safety, energy consumption and food waste impact food policy. Potential contradictions between the different aspec...

  3. Analysis of Consumption of Energy Drinks by a Group of Adolescent Athletes

    OpenAIRE

    Dariusz Nowak; Artur Jasionowski

    2016-01-01

    Background: Energy drinks (EDs) have become widely popular among young adults and, even more so, among adolescents. Increasingly, they are consumed by athletes, particularly those who have just begun their sporting career. Uncontrolled and high consumption of EDs, in addition to other sources of caffeine, may pose a threat to the health of young people. Hence, our objective was to analyze the consumption of EDs among teenagers engaged in sports, including quantity consumed, identification of ...

  4. Cowichan Valley energy mapping and modelling. Report 2 - Energy consumption and density mapping. Final report. [Vancouver Island, Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    The driving force behind the Integrated Energy Mapping and Analysis project was the identification and analysis of a suite of pathways that the Cowichan Valley Regional District (CVRD) can utilise to increase its energy resilience, as well as reduce energy consumption and GHG emissions, with a primary focus on the residential sector. Mapping and analysis undertaken will support provincial energy and GHG reduction targets, and the suite of pathways outlined will address a CVRD internal target that calls for 75% of the region's energy within the residential sector to come from locally sourced renewables by 2050. The target has been developed as a mechanism to meet resilience and climate action target. The maps and findings produced are to be integrated as part of a regional policy framework currently under development. The second task in the overall project was the mapping of regional energy consumption density. Combined with the findings from task one, this enables comparison of energy consumption density per area unit with the renewable energy resource availability. In addition, it provides an energy baseline against which future energy planning activities can be evaluated. The mapping of the energy consumption density was divided into categories to correspond with local British Columbia Assessment Authority (BCAA) reporting. The residential sub-categories were comprised of single family detached dwellings, single family attached dwellings, apartments, and moveable dwellings. For commercial and industrial end-users the 14 sub-categories are also in line with BCAA as well as the on-going provincial TaNDM project of which the CVRD is a partner. The results of task two are documented in this report. (LN)

  5. A Framework for the Estimation and Validation of Energy Consumption in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Alexandros Karagiannis

    2015-01-01

    Full Text Available Body sensor networks and implantable and ingestible medical devices energy efficiency is a substantial key factor in network lifetime and functionality. This work confronts the nodes’ energy problem by establishing a unified energy consumption framework comprised of theoretical model, energy simulator model, and electronic metering modules that can be attached to the nodes. A theoretical analysis, a simulation procedure, and the design and development of three prototype electronic metering modules are presented in this paper. We discuss the accuracy of the proposed techniques, towards a unified framework for the a priori estimation of the energy consumption in commercial sensor nodes, taking into account the application functionality and the energy properties of the incorporated electronics. Moreover, body network nodes are considered for the application and the measurements of the proposed framework.

  6. User-needs study for the 1993 residential energy consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-24

    During 1992, the Energy Information Administration (EIA) conducted a user-needs study for the 1993 Residential Energy Consumption Survey (RECS). Every 3 years, the RECS collects information on energy consumption and expenditures for various classes of households and residential buildings. The RECS is the only source of such information within EIA, and one of only a few sources of such information anywhere. EIA sent letters to more than 750 persons, received responses from 56, and held 15 meetings with users. Written responses were also solicited by notices published in the April 14, 1992 Federal Register and in several energy-related publications. To ensure that the 1993 RECS meets current information needs, EIA made a specific effort to get input from policy makers and persons needing data for forecasting efforts. These particular needs relate mainly to development of the National Energy Modeling System and new energy legislation being considered at the time of the user needs survey.

  7. Water treatment in public swimming pools - reduction of energy consumption; Vandbehandling i svoemmebade - reduktion af energiforbrug

    Energy Technology Data Exchange (ETDEWEB)

    Hammerich, H.; Radisch, N. (Ramboell, Koege (Denmark)); Olesen, Jens Christian (Gladsaxe Sportscenter, Gladsaxe (Denmark)) (and others)

    2010-04-15

    Measurements were made in five public swimming baths, and energy savings were achieved using new filters, pumps, water treatment control depending on bather load, etc. In a 50 metre pool, electricity consumption for water treatment decreased by 50%, and in a hot-water/paddling pool, electricity consumption decreased by 30-40% while still maintaining satisfactory water quality - even during periods of heavy bather load. In another swimming bath, ventilation electricity consumption was reduced by 15%. The results will e.g. be used to revise the Danish executive order on swimming pools and water quality to allow bather load-dependent water circulation. (ln)

  8. Energy consumption study for the `Aquazoo`, Duesseldorf; Energiestudie Aquazoo Duesseldorf

    Energy Technology Data Exchange (ETDEWEB)

    Barath, B. [Ingenieurbuero Barath und Wagner GmbH, Meerbusch (Germany); Morgenstern, G. [Ingenieurbuero Barath und Wagner GmbH, Meerbusch (Germany)

    1996-06-01

    The report describes the stocktaking and planning procedure of an alternative energy supply system for the Duesseldorf `Aquazoo``. This is a complex of buildings including the Loebbecke Museum with aquariums for marine and freshwater animals and terrariums for reptiles. A complex supply system is required for the different requirements on air and water temperatures. (orig./HW) [Deutsch] Der vorliegende Bericht dokumentiert die Bestandsaufnahme und Konzeptentwicklung fuer eine alternative Energieversorung des Aquazoos in Duesseldorf. Der Aquazoo in Duesseldorf mit dem Loebbecke-Museum besteht aus Aquarien fuer Meerestiere und Suesswasserfische und Terrarien fuer Reptilien. Um die unterschiedlichen Anforderungen an Wasser- und Lufttemperaturen erfuellen zu koennen, ist eine komplexe Versorgungstechnik erforderlich. (orig./HW)

  9. Inferring Parametric Energy Consumption Functions at Different Software Levels

    DEFF Research Database (Denmark)

    Liqat, Umer; Georgiou, Kyriakos; Kerrison, Steve

    2016-01-01

    on the input data sizes of programs. We have developed a tool for experimentation with static analysis which infers such energy functions at two levels, the instruction set architecture (ISA) and the intermediate code (LLVM IR) levels, and reflects it upwards to the higher source code level. This required...... written in the XC language running on XCore architectures, but is general enough to be applied to other languages. Experimental results show that our LLVM IR level analysis is reasonably accurate (less than 6.4% average error vs. hardware measurements) and more powerful than analysis at the ISA level...

  10. Factors That Influence Human Behavior And Negatively Affect Energy Consumption In USMC Ground Units During Operations

    Science.gov (United States)

    2016-09-01

    February 2011 the Marine Corps published its Expeditionary Energy Strategy and Implementation Plan to reduce dependence on fossil fuels in the operational...inefficiently used and consequently consumed more energy than necessary. The scenarios observed can be grouped in two categories referred to as excessive...INFLUENCE HUMAN BEHAVIOR AND NEGATIVELY AFFECT ENERGY CONSUMPTION IN USMC GROUND UNITS DURING OPERATIONS by John A. Peters September 2016

  11. Evaluation of a energy consumption index for commercial buildings in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Jose Eduardo Correa Santana; Hernandez Neto, Alberto [Universidade de Sao Paulo (EP/USP), SP (Brazil). Escola Politecnica], Emails: jose.edu@gmail.com, ahneto@usp.br

    2010-07-01

    The present paper proposes a energy consumption index for commercial buildings located in four different Brazilian climates. For such evaluations, the building simulation tool EnergyPlus was used and a sensitivity analysis was made for some of the main parameters of an air-conditioned building. The analysis showed that the electrical power and lighting density as well as the COP of the air conditioning system promotes the higher variations on the proposed energy index. (author)

  12. Feedback as a means of decreasing residential energy consumption. Report PU/CES 34

    Energy Technology Data Exchange (ETDEWEB)

    Seligman, C; Darley, J M

    1976-08-01

    When residential units are analyzed in human factor terms, it is apparent that the consumption level feedback (typically a bill, calculated once a month, over all appliances) is inadequate to give the resident useful information about his energy consuming actions. The present study tested the hypothesis that providing immediate feedback to homeowners concerning their daily rate of electric usage would be effective in reducing electric consumption. In the studied homes, central air-conditioning is the largest single source of electric power consumption during the summer. Accordingly, it was possible to predict the household's expected electric consumption in terms of the average daily outdoor temperature. Predicted electric consumption was derived from a previous month's modeling period during which a regression line was fitted to predict consumption from average daily temperature, for each home. Feedback was expressed as a percentage of actual consumption over predicted consumption. Feedback was displayed to homeowners four times a week for approximately one month. The results confirmed the prediction. Before feedback began, the feedback and control groups were consuming electricity at approximately equal rates. During the feedback period, the feedback group used 10.5 percent less electricity. The effectiveness of the feedback procedure was explained in terms of its cueing, motivational, and commitment functions.

  13. Energy consumption in three rural Kenyan households: a survey

    Energy Technology Data Exchange (ETDEWEB)

    Wamukonya, Lucy [California Univ., Berkeley, CA (United States). Forest Products Lab.

    1995-12-31

    Woodfuel is an important source of fuel energy in Kenya, constituting about 75% of the total energy consumed. The rural population relies almost entirely on fuelwood which has become increasingly difficult to obtain. In this study a questionnaire was used to establish the form and quantity of fuel used and the types of stoves used in rural households within Nyeri, Wanguru in Embu and Muhoroni in Kisumu. Forty households in Nyeri and 30 in each of the other two areas were randomly selected for the study. The availability of agricultural residues for use as fuel and the possibility of using briquettes for cooking were established. It was found that all the households have a 3-stone cooking stove in which they burn fuelwood or agricultural residues. Cowdung is used in Embu but not in Nyeri and Kisumu. The degree to which the population relies on agricultural residues for fuel varies among the villages. In Nyeri, most of the agricultural residues are either fed to cattle or left in the field. In Embu only a few of the houses use maize cobs and stalks. However, the rural population in Muhoroni rely heavily on sugarcane residues for their cooking fuel. In general, 15-35% of a household`s income is spent on fuel though this does not take into account the time spent gathering fuel. (Author)

  14. Analysis of Spatial Disparities and Driving Factors of Energy Consumption Change in China Based on Spatial Statistics

    Directory of Open Access Journals (Sweden)

    Hualin Xie

    2014-04-01

    Full Text Available The changes of spatial pattern in energy consumption have an impact on global climate change. Based on the spatial autocorrelation analysis and the auto-regression model of spatial statistics, this study has explored the spatial disparities and driving forces in energy consumption changes in China. The results show that the global spatial autocorrelation of energy consumption change in China is significant during the period 1990–2010, and the trend of spatial clustering of energy consumption change is weakened. The regions with higher energy consumption change are significantly distributed in the developed coastal areas in China, while those with lower energy consumption change are significantly distributed in the less developed western regions in China. Energy consumption change in China is mainly caused by transportation industry and non-labor intensive industry. Rapid economic development and higher industrialization rate are the main causes for faster changes in energy consumption in China. The results also indicate that spatial autoregressive model can reveal more influencing factors of energy consumption changes in China, in contrast with standard linear model. At last, this study has put forward the corresponding measures or policies for dealing with the growing trend of energy consumption in China.

  15. The influence of biomass energy consumption on CO2 emissions: a wavelet coherence approach.

    Science.gov (United States)

    Bilgili, Faik; Öztürk, İlhan; Koçak, Emrah; Bulut, Ümit; Pamuk, Yalçın; Muğaloğlu, Erhan; Bağlıtaş, Hayriye H

    2016-10-01

    In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables' efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO2 emissions in the long run cycles after the year 2005 in the USA.

  16. Modeling GHG emission and energy consumption in selected greenhouses in Iran

    Energy Technology Data Exchange (ETDEWEB)

    Yousefi, M.; Omid, M.; Rafiee, SH.; Khoshnevisan, B. [Department of Agricultural Machinery Engineering, Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj (Iran, Islamic Republic of)

    2013-07-01

    It is crucial to determine energy efficiency and environmental effects of greenhouse productions. Such study can be a viable solution in probing challenges and existing defects. The aims of this study were to analyze energy consumption and greenhouse gas (GHG) emissions for pepper production using biological method inside greenhouses which used natural gas (NG) heating system in Esfahan province. Data were collected from 22 greenhouse holders using a face to face questionnaire method, in 2010-2011. Also, functional area was selected 1000 m2. Total energy input, total energy output, energy ratio, energy productivity, specific energy, net energy gain and total GHG emissions were calculated as 297799.9 MJ area-1, 3851.84 MJ area-1, 0.013, 0.016 kg MJ-1, 61.85 MJ kg-1, -293948 MJ area-1 and 14390.85 kg CO2 equivalent area-1, respectively. Result revealed that replacing diesel fuel with NG will not be an effective way of reducing energy consumption for greenhouse production. However, it is crucial to focus on energy management in order to enhance the energy and environmental indices. One way to supply adequate input energy and a reduction in GHG emissions is the utilization of renewable and clean energy sources instead of NG and diesel fuel. Also, it is suggested to adopt solar greenhouses in the region and to supply electricity from non-fossil sources seriously.

  17. Smart HVAC control in IoT: energy consumption minimization with user comfort constraints.

    Science.gov (United States)

    Serra, Jordi; Pubill, David; Antonopoulos, Angelos; Verikoukis, Christos

    2014-01-01

    Smart grid is one of the main applications of the Internet of Things (IoT) paradigm. Within this context, this paper addresses the efficient energy consumption management of heating, ventilation, and air conditioning (HVAC) systems in smart grids with variable energy price. To that end, first, we propose an energy scheduling method that minimizes the energy consumption cost for a particular time interval, taking into account the energy price and a set of comfort constraints, that is, a range of temperatures according to user's preferences for a given room. Then, we propose an energy scheduler where the user may select to relax the temperature constraints to save more energy. Moreover, thanks to the IoT paradigm, the user may interact remotely with the HVAC control system. In particular, the user may decide remotely the temperature of comfort, while the temperature and energy consumption information is sent through Internet and displayed at the end user's device. The proposed algorithms have been implemented in a real testbed, highlighting the potential gains that can be achieved in terms of both energy and cost.

  18. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Science.gov (United States)

    2010-01-01

    ... fossil fuel energy for pool heaters. The average annual fuel energy for pool heater, EF, is defined as... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption of Pool Heaters P Appendix P to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION...

  19. Understanding household energy consumption patterns. When 'West Is Best' in Metro Manila

    Energy Technology Data Exchange (ETDEWEB)

    Sahakian, Marlyne D. [The Graduate Institute of International and Development Studies, Development Studies, 20 rue Rothschild, 1207 Geneva (Switzerland)

    2011-02-15

    This paper addresses the topic of energy and development through a multi-disciplinary and systemic approach that combines environmental considerations with a social understanding of consumption. The focus is on electricity usage in the home and specifically lighting and cooling. Set in the urban mega-polis of Metro Manila, the Philippines, energy consumption is first placed in its biophysical perspective: the energy sources and electricity grid are presented, in relation to the Philippines as well as the region. The research findings then explore the social and cultural drivers behind household electricity consumption, revealing in several examples the strong influence of globalization - understood here as the flow of people, remittances, images and ideas. Policy recommendations are provided, based on the research results, with concluding remarks relevant to other similar contexts. (author)

  20. Energy and electrode consumption analysis of electrocoagulation for the removal of arsenic from underground water.

    Science.gov (United States)

    Martínez-Villafañe, J F; Montero-Ocampo, C; García-Lara, A M

    2009-12-30

    A systematic study of the effect of design and operation conditions of an electrochemical reactor on the treatment time for arsenic (As) electro-removal from underground water (GW) was carried out to analyse the energy and electrode consumption. The effects of four factors--current density, interelectrode distance, electrode area-volume ratio, and liquid motion driving mode--were evaluated. The response variables were the energy and the electrode consumption and the treatment time to reduce the GW residual As concentration to 10 microg L(-1), which is the maximum contaminant level (MCL) established by the World Health Organization (WHO) in drinking water. The results obtained in this study showed that the factor that had the greatest effect on most of the response variables was the liquid motion driving mode. The best residence time was 20s, which favoured low energy consumption (58.78 Wh m(-3)) and low electrode material loss (9.59 g m(-3)).